Desarrollo de un modelo de redes neuronales artificiales para predecir la resistencia a la compresión y la resistividad eléctrica del concreto

OpenAIRE

Lizarazo Marriaga, Juan Manuel; Gómez Cortés, José Gabriel

2010-01-01

En esta investigación se busca obtener un método para predecir la resistencia a la compresión mediante el peso unitario y la velocidad de pulso ultrasónico usando 41 mezclas de concreto diferentes. El estudio ha sido por la necesidad de obtener un método rápido para predecir la resistencia a la compresión del concreto. De la misma manera, la investigación también busca predecir la resistividad eléctrica del concreto mediante el peso unitario, la velocidad de pulso ultrasónico y la resisten...

Towards a distributed electric generation scheme with non-conventional energies; Hacia un esquema de generacion electrica distribuida con energias no convencionales

Energy Technology Data Exchange (ETDEWEB)

Huacuz Villamar, Jorge M. [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1997-12-31

Several factors contributed to the existence of large electric systems as we know them today, such as: the increase of the electric demand by the advancement of the industrial development, the appearance of electric equipment, and household devices and by the advancement in the engineering systems, just to mention a few of them. With all this, the third part of the World population still does not have access to the electricity service. The efforts that the small electric enterprises perform to carry the service up to the site where it is required, every day time becomes more expensive and less effective. Exhausted by the weight of a huge economic debt, many electric utilities of the developing countries find each time more difficult to obtain financing to extend the power lines. This situation becomes still more serious with the present privatization scheme of the electric utilities. Although new technologies are being developed to counteract the negative effects caused by the large electricity generation power plants, the society seems to begin to show preferences for more benign to the environment options. The scheme of distributed generation can be given in to modalities: By means of isolated systems in remote sites, where there is not access to the conventional services; and with systems interconnected with the electric network where this is available [Espanol] Varios factores contribuyeron a la aparicion de los grandes sistemas electricos como los conocemos hoy en dia, tales como: el crecimiento de la demanda electrica por el avance del desarrollo industrial, la aparicion de equipos electricos y aparatos electrodomesticos y por avances en la ingenieria de los sistemas, por mencionar algunos. Con todo ello, la tercera parte de la poblacion mundial no tiene aun acceso al servicio electrico. Los esfuerzos que realizan las companias electricas para llevar el servicio hasta donde se requiere, resultan cada vez mas costosos y menos efectivos. Agobiadas por el peso

Qualitative aspects in the projects that are developed in the Instituto de Investigaciones Electricas; Aspectos cualitativos en los proyectos que se desarrollan en el Instituto de Investigaciones Electricas

Energy Technology Data Exchange (ETDEWEB)

Ruiz Neblina, Joaquin [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

1999-07-01

The globalization of markets has generated more options of purchase of all type of goods and services, these options have generated opportunities and threats for all the companies and have looked for the satisfaction of the client as a strategy to remain or incursion into the global market. The Instituto de Investigaciones Electricas (IIE) is not the exception and therefore it looks for the identification of the qualitative aspects and to systematize its application in the projects that executes by means of the implantation of a system of quality assurance based on the series of ISO 9000 Standards. Some examples are described to identify the qualitative aspects of the projects that are developed in the Institute. [Spanish] La globalizacion de los mercados ha generado mas opciones de compra de todo tipo de bienes y servicios, dichas opciones han generado oportunidades y amenazas para todas las empresas y se ha buscado satisfacer al cliente como estrategia para permanecer o incursionar en el mercado global. El Instituto de Investigaciones Electricas (IIE) no es la excepcion y por lo tanto busca identificar los aspectos cualitativos y sistematizar su aplicacion en los proyectos que realiza mediante la implantacion de un sistema de aseguramiento de la calidad basado en la serie de normas ISO 9000. Se describen algunos ejemplos para identificar los aspectos cualitativos de los proyectos que se desarrollan en el instituto.

Modelo auto-regresivo aplicado a la eliminación de ruidos de los mapas de anomalías de resistividad en fosfatos asociadas a bolsones estériles

OpenAIRE

Saad Bakkali

2008-01-01

Actualmente se emplean varios métodos para perfeccionar los bordes y contornos de mapas geofísicos. En Marruecos se realizó una prospección de fosfatos empleando el método eléctrico de resistividad; para ello se utilizó un dispositivo Schlumberger, cubriendo una superficie de 50 hectáreas, con el objetivo de detectar anomalías asociadas a bolsones estériles en los depósitos de fosfatos. Para la eliminación del ruido blanco se empleó un método basado en un modelo auto-regresivo (ARM, siglas en...

System for the measurement and detection of electric energy losses (SIM-IV); Sistema de medicion y deteccion de perdidas de energia electrica (SIM-IV)

Energy Technology Data Exchange (ETDEWEB)

Vidrio L, Gilberto; Gomez L, Martin J; Castan L, Roberto [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2004-07-01

The electric utility companies worldwide suffer, in greater or lesser degree, electrical energy losses. A great percentage of these losses is mostly due to illegal appropriations of energy. The consumers, by means of illicit practices such as clandestine connections and alteration of the operation of electricity meters, carry out the energy robbery. In order to try to alleviate the problematic of electric energy losses, in their majority by illicit, the electric utility companies have implemented one or more actions. Among the most important are: Visual inspection of the metering facilities. Its purpose is to verify the condition of the traditional protections of the metering installations, such as the seals and safety rings. Detection Equipment: These are recorders of energy consumption and of faults in conductors and are used to detect illicit connections and deviations in the consumption patterns and to the electrical energy connection or to the secondary distribution network. Statistical analysis of consumption: Many electric facility companies have adapted their processing consumption reading systems to detect deviations in the of consumption patterns of their clients. This could correspond to abnormal situations. Since this country is not extraneous to the problematic of energy losses, in the Instituto de Investigaciones Electricas it was developed a System of Measurement and Detection of Losses of Electrical Energy (SIM-IV) as a result of the knowledge of the problematic obtained from the projects in the metering area and of the interaction through work meetings with personnel of the Comision Federal de Electricidad and of Luz y Fuerza del Centro (LyFC), in which concepts of advanced technology were applied for the measurement of electrical variables. The SIM-IV is a system oriented to the metering of consumption and the detection of robberies of electrical energy caused by clandestine connections and non-allowed interventions to the energy meters. Since

System for the measurement and detection of electric energy losses (SIM-IV); Sistema de medicion y deteccion de perdidas de energia electrica (SIM-IV)

Energy Technology Data Exchange (ETDEWEB)

Vidrio L, Gilberto; Gomez L, Martin J; Castan L, Roberto [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2004-07-01

The electric utility companies worldwide suffer, in greater or lesser degree, electrical energy losses. A great percentage of these losses is mostly due to illegal appropriations of energy. The consumers, by means of illicit practices such as clandestine connections and alteration of the operation of electricity meters, carry out the energy robbery. In order to try to alleviate the problematic of electric energy losses, in their majority by illicit, the electric utility companies have implemented one or more actions. Among the most important are: Visual inspection of the metering facilities. Its purpose is to verify the condition of the traditional protections of the metering installations, such as the seals and safety rings. Detection Equipment: These are recorders of energy consumption and of faults in conductors and are used to detect illicit connections and deviations in the consumption patterns and to the electrical energy connection or to the secondary distribution network. Statistical analysis of consumption: Many electric facility companies have adapted their processing consumption reading systems to detect deviations in the of consumption patterns of their clients. This could correspond to abnormal situations. Since this country is not extraneous to the problematic of energy losses, in the Instituto de Investigaciones Electricas it was developed a System of Measurement and Detection of Losses of Electrical Energy (SIM-IV) as a result of the knowledge of the problematic obtained from the projects in the metering area and of the interaction through work meetings with personnel of the Comision Federal de Electricidad and of Luz y Fuerza del Centro (LyFC), in which concepts of advanced technology were applied for the measurement of electrical variables. The SIM-IV is a system oriented to the metering of consumption and the detection of robberies of electrical energy caused by clandestine connections and non-allowed interventions to the energy meters. Since

Calculation of electromagnetic fields in electric machines by means of the finite element. Computational aspects; Calculo de campos electromagneticos en maquinas electricas mediante elemento finito. Aspectos computacionales

Energy Technology Data Exchange (ETDEWEB)

Rosales, Mario; De la Torre, Octavio [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1990-12-31

In this article are described the computational characteristics of the Package CALIIE 2D of the Instituto de Investigaciones Electricas (IIE), for the calculation of bi-dimensional electromagnetic fields. The computational implementation of the package is based in the electromagnetic and numerical statements formerly published in this series. [Espanol] En este articulo se describen las caracteristicas computacionales del paquete CALIIE 2D del Instituto de Investigaciones Electricas (IIE), para calcular campos electromagneticos bidimensionales. La implantacion computacional del paquete se basa en los planteamientos electromagneticos y numericos antes publicados en esta serie.

Calculation of electromagnetic fields in electric machines by means of the finite element. Computational aspects; Calculo de campos electromagneticos en maquinas electricas mediante elemento finito. Aspectos computacionales

Energy Technology Data Exchange (ETDEWEB)

Rosales, Mario; De la Torre, Octavio [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1989-12-31

In this article are described the computational characteristics of the Package CALIIE 2D of the Instituto de Investigaciones Electricas (IIE), for the calculation of bi-dimensional electromagnetic fields. The computational implementation of the package is based in the electromagnetic and numerical statements formerly published in this series. [Espanol] En este articulo se describen las caracteristicas computacionales del paquete CALIIE 2D del Instituto de Investigaciones Electricas (IIE), para calcular campos electromagneticos bidimensionales. La implantacion computacional del paquete se basa en los planteamientos electromagneticos y numericos antes publicados en esta serie.

ELECTRICAL PROPERTIES OF Cr/CrN NANO-MULTILAYERS PRODUCED BY THE UNBALANCED MAGNETRON SPUTTERING TECHNIQUE

Directory of Open Access Journals (Sweden)

DIANA MARITZA MARULANDA CARDONA

2011-01-01

Full Text Available Peliculas de nitruro de cromo (CrN se han aplicado como recubrimientos protectores contra el desgaste y la corrosion debido a sus excelentes propiedades mecanicas y alta resistencia a la corrosion, y en el campo electronico debido a su baja resistividad. Sin embargo, se ha encontrado que las multicapas que combinan peliculas metal/ceramico podrian mejorar las propiedades en comparacion a sus contrapartes en monocapa debido al aumento e interaccion entre interfaces. En este trabajo se produjeron nano-multicapas de Cr/CrN a traves de la tecnica de sputtering con magnetron desbalanceado con tres grados de desbalanceo diferentes para estudiar la influencia de este parametro en las propiedades electricas. Se crecieron multicapas con un espesor total de aproximadamente 1 microm y un periodo de bicapa (A de 200 nm, 100 nm y 20 nm. Las multicapas se produjeron a temperatura ambiente sobre acero H13 y silicio (100 y se estudio su microestructura y las propiedades electricas en funcion del campo magnetico. La formacion de fases se caracterizo a traves de Difraccion de Rayos X y los resultados muestran las orientaciones (111 y (200 para todas las multicapas. Se obtuvieron imagenes de la seccion transversal a traves de Microscopia Electronica de Barrido y los resultados muestran la formacion de una estructura en multicapas.

The electric energy and the environment in Mexico. Volume 3; Energia electrica y medio ambiente en Mexico. Volumen 3

Energy Technology Data Exchange (ETDEWEB)

Quintanilla Martinez, Juan [eds.] [Universidad Nacional Autonoma de Mexico, Mexico, D. F. (Mexico)

1997-12-31

This document is the third one of three volumes of the 1. Seminar on the Current Conditions and Perspectives of the Electric Sector in Mexico, organized by the Programa Universitario de Energia and the Instituto de Investigaciones Economicas (University Program of Energy and the Institute of Economic Research), both of them agencies of the Universidad Autonoma de Mexico (UNAM). The titles of the three volumes are the following: Volume 1.- The opening of the Mexican Electric Sector to foreign investment. Volume 2.- Concrete innovation and technological learning experiences at the Luz y Fuerza del Centro enterprise. Volume 3.- The Electric Energy and the Environment in Mexico. This third volume covers the following subjects: Hydroelectricity, land use and water managing; the electric generation in Mexico and its environmental impact, the nuclear electricity and the handling of radioactive materials; the exposure to electromagnetic fields and its association with children`s leukemia; the energy in Mexico and the sustainable development; potential of electricity generation in large scale with wind power in Mexico; towards a scheme of distributed electric power generation with non-conventional energies and renewable energy sources in Mexico in the 21Century. These documents were elaborated by specialists of the electric sector, from the sector itself as well as from private and public academic entities [Espanol] Este documento constituye el tercero de tres volumenes del Primer Seminario sobre Situacion y Perspectivas del Sector Electrico en Mexico, organizado por el Programa Universitario de Energia y el Instituto de Investigaciones Economicas, ambas dependencias de la Universidad Nacional Autonoma de Mexico (UNAM). Los titulos de los tres volumenes son los siguientes: volumen 1: La apertura externa del sector electrico mexicano, volumen 2: Experiencias concretas de innovacion y aprendizaje tecnologico en la empresa Luz y Fuerza del Centro, volumen 3: Energia electrica

Standardization for electric energy saving; Normalizacion para el ahorro de energia electrica

Energy Technology Data Exchange (ETDEWEB)

Reyes Diaz, Arturo [Fideicomiso de Apoyo al Programa de Ahorro de Energia del Sector Electrico (FIDE), Mexico, D. F. (Mexico)

1994-12-31

This work describes shortly the current legislation on the standardization; as well as the participation of the entities Fideicomiso de Apoyo al Programa de Ahorro de Energia del Sector Electrico (FIDE) and Programa de Ahorro de Energia (PAESE) in the consulting committees, for the elaboration of the Mexican official standards focussed to electric power saving. [Espanol] El presente trabajo, describe brevemente la legislacion actual sobre la normalizacion; asi como la participacion de las entidades Fideicomiso de Apoyo al Programa de Ahorro de Energia del Sector Electrico (FIDE) y Programa de ahorro de Energia (PAESE) en los comites consultivos, para la elaboracion de normas oficiales mexicanas enfocadas al ahorro de energia electrica.

Standardization for electric energy saving; Normalizacion para el ahorro de energia electrica

Energy Technology Data Exchange (ETDEWEB)

Reyes Diaz, Arturo [Fideicomiso de Apoyo al Programa de Ahorro de Energia del Sector Electrico (FIDE), Mexico, D. F. (Mexico)

1993-12-31

This work describes shortly the current legislation on the standardization; as well as the participation of the entities Fideicomiso de Apoyo al Programa de Ahorro de Energia del Sector Electrico (FIDE) and Programa de Ahorro de Energia (PAESE) in the consulting committees, for the elaboration of the Mexican official standards focussed to electric power saving. [Espanol] El presente trabajo, describe brevemente la legislacion actual sobre la normalizacion; asi como la participacion de las entidades Fideicomiso de Apoyo al Programa de Ahorro de Energia del Sector Electrico (FIDE) y Programa de ahorro de Energia (PAESE) en los comites consultivos, para la elaboracion de normas oficiales mexicanas enfocadas al ahorro de energia electrica.

The electric tariff in the residential sector; Tarificacion electrica en el sector residencial

Energy Technology Data Exchange (ETDEWEB)

Sheinbaum Pardo, Claudia [Instituto de Ingenieria, Universidad Nacional Autonoma de Mexico (UNAM), Mexico, D. F. (Mexico)

1997-12-31

The main objective of this paper is to make an historical revision and analyze the current condition of the electric tariffs in the Mexican residential sector and ask ourselves if the equalization of tariffs generates the possibility that the entire population has access to the electricity service. The document is divided into three parts. The first one presents the history and the tendencies of the tariffs in the domestic sector in Mexico since 1973 until 1996 and the current tariff structure. The second one describes the characteristics of the residential users and mention is made of how the increment of the electric tariffs would affect the various population sectors. The last part of this paper presents some tariff criteria, that take into account energy conservation measures [Espanol] El objetivo principal de este trabajo es hacer una revision historica y analizar la situacion actual de las tarifas electricas en el sector residencial mexicano y preguntarnos si la igualdad de tarifas genera la posibilidad de que toda la poblacion tenga acceso al servicio electrico. El documento se divide en tres partes. La primera presenta la historia y tendencias de las tarifas del sector domestico en Mexico desde 1973 hasta 1996 y la estructura tarifaria actual. La segunda describe las caracteristicas de los usuarios residenciales y se menciona como afectaria el incremento de las tarifas electricas a los distintos sectores de la poblacion. La ultima parte de este trabajo presenta algunos criterios de tarificacion, que toman en cuenta medidas de ahorro de energia

Work Report 1994-1995 Instituto de Investigaciones Electricas (Electrical Research Institute)

International Nuclear Information System (INIS)

Instituto de Investigaciones Electricas.

1995-01-01

The Instituto de Investigaciones Electricas (Electrical Research Institute) collaborates with the Comision Federal de Electricidad (Electricity Federal Commission) and with the public and private entities of the electric sector in the solution of scientific and technological problems. The activity of the Institute follows the lineaments of the Secretaria de Energia (Energy Secretariat) and is inside the frame of the programs of national modernization. This two-year report presents in seven sections the activities of the Institute; the sections are: 1. Importance of the IIE in the economic context of the Governmental sector. 2. Orientations of sectorial structural policy and main operation results. 3. Structural change, 1994-1995. 4. Research and Development, advances and results. 5. Budget and financial situation. 6. Statistical Annex. 7. Glossary

Design of earth network in electric substations; Diseno de redes de tierra en subestaciones electricas

Energy Technology Data Exchange (ETDEWEB)

Raull-Martin, J. [Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico)

2000-09-01

The purpose of this paper is to present a summarized version of the different types of construction of grounding systems, as web as their materials and formulas, which are necessary and useful for the design and building of a grounding network for medium to high voltage facilities. A description is also made of how to determine the electrical resistivity of subsoil layers with different physical characteristics. Several illustrative examples are also solved in the paper. [Spanish] El proposito de este articulo es presentar de manera resumida los diferentes tipos de construccion de los sistemas de tierra, asi como sus materiales y formulas, los cuales son necesarios y utiles para el diseno y edificacion de una red de tierra para instalaciones de mediana y alta tension. Se describe tambien la obtencion de las diferentes resistividades que presentan los terrenos con diversas caracteristicas fisicas. Asi mismo, se solucionan ejercicios ilustrativos a lo largo del articulo.

3D As-Built a documentation of the substation electrical power 400 KV; Documentacion 3D As-Built de una subestacion electrica de 400 KV

Energy Technology Data Exchange (ETDEWEB)

Sarti Fernandez, F.

2011-07-01

It's getting parameters of time, yields and products obtained, in order to have an objective reference to the possible application of this technique to substations of Red Electrica Espanola (REE).

Interconnection of industrial centers with the electric network of the public service; Interconexion de centros industriales con la red electrica del servicio publico

Energy Technology Data Exchange (ETDEWEB)

Rosales Sedano, Inocente; Lopez Velazquez, Juan Jose; Garcia Paredes, Job; Robles Pimentel, Edgar [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico); Garcia Alvarez, David; Guzman Camacho, Benigno [Petroleos Mexicanos (Mexico)

2000-07-01

The large industrial centers that have continuous production processes and consume high amounts of electrical energy, generally have their own power generation. The petrochemical complexes, the paper and steel factories and the sugar mills are examples of this type of centers. On the other hand, the new regulation for the generation of electrical energy that allows to the electrical energy interchange between private companies and the public network, has originated the necessity of connecting systems that formerly operated isolated. Since the original design of the isolated electrical systems was to operate in an independent form, making the interconnection can generate technical problems that must be analyzed and solved. In this paper, some experiences related with the behavior of electrical equipment when connected to operate with the public network, are presented. [Spanish] Los grandes centros industriales que tienen procesos de produccion continua y consumen altas cantidades de energia electrica, generalmente cuentan con generacion propia. Los complejos petroquimicos, las fabricas de papel y acero y los ingenios azucareros son ejemplos de este tipo de centros. Por otro lado, la nueva reglamentacion de generacion de energia electrica que permite el intercambio de energia electrica entre las companias privadas y la red publica, ha originado la necesidad de conectar sistemas que antes operaban aislados. Debido a que el diseno original de los sistemas electricos aislados fue trabajar en forma independiente, el realizar la interconexion puede generar problemas tecnicos que tienen que analizarse y resolverse. En este articulo, se presentan algunas experiencias relacionadas con el comportamiento del equipo electrico al operar conectado con la red publica.

Nanocompósitos PVC/nanotubos de carbono: avaliação da resistividade elétrica e efeito do solvente utilizado na obtenção dos nanocompósitos nas propriedades térmicas

Directory of Open Access Journals (Sweden)

Rogério G. Araújo

2013-01-01

Full Text Available O procedimento de obtenção de nanocompósitos dispersando as nanopartículas na matriz polimérica em solução com posterior eliminação do solvente tem sido bastante utilizado, considerando a maior eficiência de obtenção de homogeneidade do produto final. Entretanto, a presença de solvente residual nos nanocompósitos pode afetar as propriedades micro e macroscópicas do produto. O objetivo deste trabalho foi avaliar as propriedades térmicas de nanocompósitos de poli(cloreto de vinila/nanotubos de carbono de paredes múltiplas obtidos a partir da solução do polímero e dispersão dos nanotubos de carbono em tetraidrofurano (THF, bem como a resistividade elétrica dos nanocompósitos e a influência de solvente residual. A presença de tetraidrofurano residual reduz a temperatura de transição vítrea (Tg em até 26 °C, sendo independente da quantidade de nanotubos de carbono. A eliminação total do solvente é um fator importante para que não induza mudanças nas propriedades da matriz polimérica. O enxerto de grupos -COOH na estrutura dos nanotubos induz uma considerável redução da resistividade elétrica, em dez ordens de grandeza, a partir de 0,4 %(m/m de nanotubos na composição dos nanocompósitos.

Analysis methodology for economic technical feasibility studies in offshore electrical generation systems; Metodologia de analisis para estudios de factibilidad tecnica economica en sistemas de generacion electrica costa fuera

Energy Technology Data Exchange (ETDEWEB)

Fiscal Escalante, Raul [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2007-07-01

An analysis methodology followed in the development of technique-economic feasibility studies of systems of electrical generation in offshore electrical installations is presented, including the obtaining of the curves of the turbine and generator performance, the technical considerations for the formulation of the operation scenes and the calculations of the economic evaluation of a real scenario. [Spanish] Se muestra una metodologia de analisis seguida en el desarrollo de estudios de factibilidad tecnica-economica de sistemas de generacion electrica en instalaciones electricas costa fuera, incluyendo la obtencion de las curvas de comportamiento de la turbina y el generador, las consideraciones tecnicas para la formulacion de los escenarios de operacion y los calculos de la evaluacion economica de un escenario real.

Índice de resistividade renal como preditor da revascularização renal para hipertensão renovascular Índice de resistividad renal como predictor de la revascularización renal para hipertensión renovascular Renal resistance index predicting outcome of renal revascularization for renovascular hypertension

Directory of Open Access Journals (Sweden)

Simone N. Santos

2010-04-01

Full Text Available FUNDAMENTO: A estenose arterial renal (EAR é uma causa potencialmente reversível de hipertensão arterial sistêmica (HAS e nefropatia isquêmica. Apesar da revascularização bem sucedida, nem todos os pacientes (pt apresentam melhora clínica e alguns podem piorar. OBJETIVO: O presente estudo se destina a avaliar o valor do índice de resistividade renal (IR como preditor dos efeitos da revascularização renal. MÉTODOS: Entre janeiro de 1998 e fevereiro de 2001, 2.933 pacientes foram submetidos ao duplex ultrassom renal. 106 desses pacientes apresentaram EAR significativa e foram submetidos a angiografia e revascularização renal. A pressão arterial (PA foi medida antes e depois da intervenção, em intervalos de até 2 anos e as medicações prescritas foram registradas. Antes da revascularização, o IR foi medido em 3 locais do rim, sendo obtida uma média dessas medições. RESULTADOS: Dos 106 pacientes, 81 tiveram IR80. A EAR foi corrigida somente por angioplastia (PTA em 25 pts, PTA + stent em 56 pts e cirurgicamente em 25 pts. Dos pacientes que se beneficiaram da revascularização renal; 57 dos 81 pacientes com IR 80. Usando um modelo de regressão logística múltipla, o IR esteve significativamente associado à evolução da PA (p = 0,001, ajustado de acordo com os efeitos da idade, sexo, PAS, PAD, duração da hipertensão, o tipo de revascularização, número de fármacos em uso, nível de creatinina, presença de diabete melito, hipercolesterolemia, volume sistólico, doença arterial periférica e coronariana e tamanho renal (OR 99,6-95%CI para OR 6,1-1.621,2. CONCLUSÃO: A resistividade intrarrenal arterial, medida por duplex ultrassom, desempenha um papel importante na predição dos efeitos pós revascularização renal para EAR.FUNDAMENTO: La estenosis arterial renal (EAR es una causa potencialmente reversible de hipertensión arterial sistémica (HAS y nefropatía isquémica. Pese a que la revascularización sea

System for the design of electrical distribution substations; Sistema para el diseno de subestaciones electricas de distribucion

Energy Technology Data Exchange (ETDEWEB)

Zayas Perez, Benjamin Eddie; Islas Perez, Eduardo; Bahena Rada, Jessica Liliana; Romero Lima, Jesus [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico); Sierra Rodriguez, Benjamin; Moreno Diaz, Humberto [Comision Federal de Electricidad (Mexico)

2011-07-01

The physical design of electric substations involves a variety of activities, such as developing, reviewing and performing modifications to different design proposals, estimating costs and producing documents to be integrated into an executive project. These activities are usually conducted at the Distribution Divisions of the Federal Electric Commission (CFE) through two separate processes: the development of engineering plans with computer-aided design software (CAD) and volumetric calculations for the initial budget using conventional spreadsheets. The documents are manually developed on an individual basis, without the existence of any functions to allow for automatically updating the design modifications of any of the plans. The corresponding initial budget becomes a lengthy and laborious process with the likelihood of inconsistencies among the documents. In order to optimize the design process for the public and electromechanical works of electric substations (ES) in a three-dimensional (3D) graphic environment, the IIE's Management of Process Supervision, in coordination with the CFE Distribution Subdivision, developed the System for the Design of Electric Substation Distribution (SDESD). This system makes use of the advantages of CAD3D technology to develop detail engineering, cost engineering to calculate initial budgets and virtual reality for three-dimensional interactive navigation. It is worth mentioning that this system is currently in the implementation phase at the CFE Distribution Subdivision. This article briefly describes the main stages in the development of the project, as well as the functioning and principal components of the system. [Spanish] El diseno fisico de subestaciones electricas implica una variedad de actividades, tales como elaborar, revisar y efectuar modificaciones de diferentes propuestas de diseno, estimar costos y producir documentos, para integrarlos como parte de un proyecto ejecutivo. Estas actividades usualmente se

Efficient use of electric power in corporative 3M Mexico; Uso eficiente de la energia electrica en el corporativo 3M Mexico

Energy Technology Data Exchange (ETDEWEB)

Sanchez Perez, Alfredo; Quinones Bonilla, Antonio S. [3M Mexico, S.A. de C.V. (Mexico); Bustos Antunez, Jorge I; Reyes Arce, Manuel [Hines Interests, S.A. de C.V. (Mexico)

2003-07-01

It is not enough to count on with the state of the art technology for the daily operation of a building, the challenge is to be able to make a clear analysis and with attainable goals for the optimization of rational use of the electrical energy in the operation of intelligent buildings without affecting the comfort and productivity for users as well as the functionality and profitability for the owner. This went our base to carry out control strategies that helped the efficient use of the electrical energy, obtaining important savings without neglecting the operative part, of services and human within the property. It is thus, that 3M Mexico wanting to reach these purposes, conducted actions to improve the efficiency of the equipment in the following items: electric network, general lighting, air conditioning system, ventilation and extraction, hydropneumatic system, and sumps operation. [Spanish] No basta contar con la tecnologia de punta para la operacion diaria de un edificio, el reto es ser capaces de realizar un analisis claro y con metas alcanzables para la optimizacion de uso racional de la energia electrica en las operaciones de edificios inteligentes sin afectar el confort y productividad para usuarios asi como la funcionalidad y rentabilidad para el propietario. Esta fue nuestra base para llevar a cabo estrategias de control que ayudaron al uso eficiente de la energia electrica, obteniendo ahorros importantes sin descuidar la parte operativa, de servicios y humana dentro de la propiedad. Es asi, que 3M Mexico queriendo alcanzar dichos propositos, realizo acciones para mejorar la eficiencia de los equipos en los siguientes rubros: red electrica, iluminacion general, sistema de aire acondicionado, ventilacion y extraccion, sistema hidroneumatico, y operacion de carcamos.

Introduction criteria and concepts on energy saving in the technical standards for electric installations; Introduccion de criterios y conceptos de ahorro de energia en las normas tecnicas para instalaciones electricas

Energy Technology Data Exchange (ETDEWEB)

Rincon Nader, Jorge A [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1993-12-31

The project Introduction Criteria and Concepts on Energy Saving in the Technical Standards for electric installations, is described, whose immediate objective is to recommend and in some cases regulate the use of energy saving equipment and devices and the adoption of attitudes and procedures that convey into saving, and the rational and efficient use of the electric energy. [Espanol] Se describe el proyecto Introduccion de Criterios y Conceptos de Ahorro de Energia en las Normas Tecnicas para instalaciones electricas, que tiene como objetivo inmediato recomendar, y en algunos casos reglamentar el uso de equipos y dispositivos ahorradores y la adopcion de actitudes y procedimientos que conduzcan a un ahorro y uso racional y eficiente de la energia electrica.

Introduction criteria and concepts on energy saving in the technical standards for electric installations; Introduccion de criterios y conceptos de ahorro de energia en las normas tecnicas para instalaciones electricas

Energy Technology Data Exchange (ETDEWEB)

Rincon Nader, Jorge A. [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1992-12-31

The project Introduction Criteria and Concepts on Energy Saving in the Technical Standards for electric installations, is described, whose immediate objective is to recommend and in some cases regulate the use of energy saving equipment and devices and the adoption of attitudes and procedures that convey into saving, and the rational and efficient use of the electric energy. [Espanol] Se describe el proyecto Introduccion de Criterios y Conceptos de Ahorro de Energia en las Normas Tecnicas para instalaciones electricas, que tiene como objetivo inmediato recomendar, y en algunos casos reglamentar el uso de equipos y dispositivos ahorradores y la adopcion de actitudes y procedimientos que conduzcan a un ahorro y uso racional y eficiente de la energia electrica.

Electric power saving potential due to domestic refrigerators replacement; Potencial de ahorro de energia electrica por el reemplazo de refrigeradores domesticos

Energy Technology Data Exchange (ETDEWEB)

Peralta Solorio, Jose Luis [Fideicomiso para el Ahorro de Energia Electrica (Mexico)]. E-mail: jose.peralta@cfe.gob.mx

2006-04-15

In Mexico the second most used electrical appliance is: refrigerator. Owing to its use, it would be a promising option for electric power saving. In Guadalajara, Reynosa and Tampico it was performed a study with the aim of launching a project to replace the old refrigerators with new ones which are more effective and less expensive. Since the refrigerators cost and the electrical invoicing saving, the electric appliance change is profitable. To expect with this replacement more than eight million of refrigerators manufactured before 1997 will be changed. [Spanish] El refrigerador es el segundo electrodomestico mas utilizado a nivel nacional, esto permite que debido a su uso sea una opcion prometedora para el ahorro de energia electrica. Se hizo un estudio en Guadalajara, Reynosa y Tampico con el fin de lanzar un proyecto para sustituir los refrigeradores viejos por unos nuevos que sean mas eficaces y menos costosos. Por el costo de los refrigeradores y el ahorro en la facturacion electrica, el cambio de electrodomestico es rentable, de esta manera se espera que los mas de ocho millones de refrigeradores fabricados antes de 1997 que existen en el pais sean cambiados.

Calculation of electromagnetic field in electric machines through the finite element: Electromagnetic modeling; Calculo de campos electromagneticos en maquinas electricas mediante elemento finito: Modelacion electromagnetica

Energy Technology Data Exchange (ETDEWEB)

Rosales, Mario F [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1988-12-31

In this article are presented the general characteristics of the electromagnetic phenomena that can be described by means of the software CALIIE-2D of the Instituto de Investigaciones Electricas (IIE) derived from a modeling based in the magnetic and electric potentials, always using the MKS rationalized units system. Closed regions are considered with axial or moving symmetry to incorporate the bi-dimensional behavior of the electromagnetic fields. The possibility of means with movement is also included. [Espanol] En este articulo se presentan las caracteristicas generales de los fenomenos electromagneticos que pueden describirse mediante el programa de computo CALIIE-2D, del Instituto de Investigaciones Electricas (IIE), que provienen de una modelacion basada en los potenciales magnetico y electrico, en esta se utiliza sistema MKS racionalizado de unidades. Se consideran regiones cerradas con simetria axial o traslacional para incorporar el comportamiento bidimensional de los campos electromagneticos, se incluye tambien la posibilidad de medios con movimiento.

Calculation of electromagnetic field in electric machines through the finite element: Electromagnetic modeling; Calculo de campos electromagneticos en maquinas electricas mediante elemento finito: Modelacion electromagnetica

Energy Technology Data Exchange (ETDEWEB)

Rosales, Mario F. [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1987-12-31

In this article are presented the general characteristics of the electromagnetic phenomena that can be described by means of the software CALIIE-2D of the Instituto de Investigaciones Electricas (IIE) derived from a modeling based in the magnetic and electric potentials, always using the MKS rationalized units system. Closed regions are considered with axial or moving symmetry to incorporate the bi-dimensional behavior of the electromagnetic fields. The possibility of means with movement is also included. [Espanol] En este articulo se presentan las caracteristicas generales de los fenomenos electromagneticos que pueden describirse mediante el programa de computo CALIIE-2D, del Instituto de Investigaciones Electricas (IIE), que provienen de una modelacion basada en los potenciales magnetico y electrico, en esta se utiliza sistema MKS racionalizado de unidades. Se consideran regiones cerradas con simetria axial o traslacional para incorporar el comportamiento bidimensional de los campos electromagneticos, se incluye tambien la posibilidad de medios con movimiento.

An application of neural network in geophysical prospecting. Electrical resistivity at Las Virgenes geothermal field, Baja California Sur, Mexico; Una aplicacion de las redes neuronales a la prospeccion geofisica. Resistividad electrica en las Tres Virgenes, Baja California Sur, Mexico

Energy Technology Data Exchange (ETDEWEB)

Palma Guzman, Sergio Hugo [Comision Federal de Electricidad, Morelia, Michoacan (Mexico)

2000-12-01

The technology of the neural network is presented with geophysical focus in the Las Virgenes geothermal field, Baja California Sur, Mexico. The results obtained when extrapolating the associative data of the prospecting magnetoteluria and Vertical Electric Sounding, on the area of the geothermal wells to the rest of the area, allows to classify zones of interest for the geothermal exploitation. Also, the use of these associative parameters with the information of the stabilized temperature of the wells, they allow to predict temperatures for the rest of the area. [Spanish] Se presenta una aplicacion de la tecnologia de las redes neuronales con enfoque geofisico en el campo geotermico de Las Virgenes, Baja California Sur, Mexico. Los resultados obtenidos al extrapolar los datos asociativos de las prospecciones geoelectricas de magnetoteluria y sondeos electricos verticales, en la zona de los pozos geotermicos al resto del area, permiten clasificar zonas de interes para la explotacion geotermica. Tambien, la utilizacion de estos parametros asociativos con la informacion de la temperatura estabilizada de los pozos, permiten predecir temperaturas para la misma area.

Experimental evaluation of the consumption of electrical energy of domestic refrigerators in Mexico; Evaluacion experimental del consumo de energia electrica de refrigeradores domesticos en Mexico

Energy Technology Data Exchange (ETDEWEB)

Arroyo Cabanas, Fernando Gabriel [Programa de Energia, Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico); Ambriz Garcia, Juan Jose; Paredes Rubio, Hernando Romero [Area de Ingenieria en Recursos Energeticos, Universidad Autonoma Metropolitana, Mexico, D.F. (Mexico)

2004-06-15

In this work the experimental methodology developed to carry out tests of the electrical energy of refrigerators consumption as norm NOM-015-ENER-2002 is described. The tests were made in the Laboratory of Controlled Environment of the Iztapalapa Unit of the Universidad Autonoma Metropolitana to a sample of old domestic refrigerators in operation. The results found show that the consumption of electrical energy of refrigerators of more than 10 years of age can be higher than 60% of what a modern refrigerator of high efficiency would consume, or 30% higher if the refrigerator was made between 1997 and 2002. With these results it is sustained, in a more complete way, the evaluation of the saving potential of the national electrical energy by the substitution of old domestic refrigerators by modern, as reported in a previous work. [Spanish] En este trabajo se describe la metodologia experimental desarrollada para efectuar pruebas del consumo de energia electrica a refrigeradores conforme la norma NOM-015-ENER-2002. Las pruebas se realizaron en el Laboratorio de Ambiente Controlado de la Unidad Iztapalapa de la Universidad Autonoma Metropolitana a una muestra de refrigeradores domesticos antiguos en operacion. Los resultados encontrados muestran que el consumo de energia electrica de refrigeradores de mas de 10 anos de antig�edad puede superior al 60% de lo que consumiria un refrigerador moderno de alta eficiencia, o superior en un 30% si el refrigerador fue fabricado entre 1997 y 2002. Con estos resultados se sustenta de manera mas completa la evaluacion del potencial de ahorro de energia electrica nacional por substitucion de refrigeradores domesticos antiguos por modernos reportado en un trabajo anterior.

Demand curves of electric energy in domestic sector in two regions of Mexico; Curvas de demanda de energia electrica en sector domestico de dos regiones de Mexico

Energy Technology Data Exchange (ETDEWEB)

Maqueda Zamora, Martin Roberto; Sanchez Viveros, Luis Agustin [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2011-07-01

In this work, is presented the analysis of residential consumption, regarding the temperature of two areas and types of electrical appliances. A shape characteristic of the load of the electrical energy is obtained for two geographical areas in Mexico. The consumption information was obtained from measurements in residential consumers and from the Mexican Utility. It is also shown the demand profile of the main residential appliances, obtained from smart metering equipment to separate the residential users' load profiles. It is shown the effect of the different variables analyzed on the electrical power consumption, mainly the type of equipment, the geographical localization, the weather (temperature, humidity and vegetation type). With the results attained, the definition of effective energy-saving programs and its effectiveness can be obtained. [Spanish] En este trabajo se presenta el analisis del consumo residencial considerando la temperatura de las dos areas y tipos de aparatos electricos. Se obtiene una forma caracteristica de la carga de energia electrica de dos areas geograficas de Mexico. La informacion sobre el consumo se obtuvo de mediciones en consumidores residenciales y de una empresa electrica mexicana. Tambien se muestra el perfil de demanda de los principales aparatos residenciales, derivado de equipos de medicion inteligentes para separar los perfiles de carga de usuarios residenciales. Se muestra el efecto de diferentes variables analizadas en el consumo de energia electrica, principalmente el tipo de equipo, la localizacion geografica, el clima (temperatura, humedad y tipo de vegetacion). Con los resultados alcanzados pueden definirse programas de ahorro de energia efectivos y lograr implantarlos.

Supervisory control for hybrid systems of electrical generation based on fuzzy logic; Control supervisorio para sistemas hibridos de generacion electrica basado en logica difusa

Energy Technology Data Exchange (ETDEWEB)

Lagunas M, Javier; Ortega S, Cesar [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico); Caratozzolo M, Patricia [Instituto Tecnologico de Estudios Superiores de Monterrey, campus Cd. de Mexico (Mexico)

2005-07-01

The development and integration of hybrid systems of electrical generation (SHGE) of small capacity: The intention of these developments is its implementation in isolated or far away communities from conventional electric networks, that contribute in the own productive processes of these towns. As part of these work a system of control for their hybrid system wind-photovoltaic- internal combustion machine was developed that operates nowadays in a system installed in Pachuca, Hidalgo, Mexico. However, in the two past years, the GENC has worked, altogether with the Management of Control and Instrumentation of the Instituto de Investigaciones Electricas (IIE) and the Centro Nacional de Investigacion y Desarrollo Tecnologico (CENIDET) (National Center of Research and Technological Development), to incorporate an intelligent control technique in the regulation of the hybrid systems of wind-photovoltaic-machine of internal combustion type. Lemos de Pereira rises that the main problems of the present technology of the SHGE are related to the control and supervision of the power systems. The system that is in charge of the actions of load control and dispatch is denominated supervisory control. This controller supervises the operation of all the components, regulates the entry or exiting of operation of the generation systems, as well as the loads. [Spanish] El desarrollo e integracion de sistemas hibridos de generacion electrica (SHGE) de pequena capacidad. El proposito de estos desarrollos es su implementacion en comunidades aisladas o alejadas de la red electrica convencional, las cuales contribuyan en los procesos productivos propios de estos poblados. Como parte de dichos trabajos se desarrollo un sistema de control para su sistema hibrido eolico-fotovoltaico-maquina de combustion interna que opera actualmente en un sistema instalado en Pachuca, Hidalgo, Mexico. Ahora bien, en los dos ultimos anos, la GENC ha trabajado, en conjunto con la Gerencia de Control e

Metodología basada en redes neurales para interpretación de la resistividad del suelo en zonas urbanas. Methodology based on neural networks for earth resistivity interpretation in congested urban areas

Directory of Open Access Journals (Sweden)

Miguel Martínez Lozano

2015-04-01

Full Text Available Uno de los problemas que se afronta durante el diseño de un sistema de puesta a tierra (PAT en zonas urbanas, es la obtención de los parámetros eléctricos del suelo, ya que los métodos tradicionales de medición de resistividad no se pueden aplicar por problemas de espacio. En este trabajo, se plantea una alternativa para la obtención de la resistividad, mediante sondeo eléctrico introduciendo una barra vertical y registrando cómo varía la resistencia de PAT del electrodo en función de la profundidad; con esos resultados se desarrolla una metodología basada en redes neurales, para estimar los parámetros del suelo para un modelo biestratificado del mismo. Se estudia por tanto, el tema de las complicaciones de medición en zonas urbanas y se plantea en detalle la metodología empleando técnicas modernas de medición y procesamiento. Los resultados obtenidos, tanto en fase de simulación digital como con ensayos de campo, muestran la validez.  One of the main troubles for grounding system design in an electrical installation on congested urban areas is obtaining the soil parameters, since the traditional measurements techniques are not applicable due to the limited space. In the present work, an alternative procedure based on introducing a driven rod into the soil and registering the variation of ground resistance versus the depth, is presented; with the field measurements obtained, a procedure were evaluated to estimate the soil parameters in a simplified bi-stratified model (two vertical layers using a trained neural network to minimize the effort and time to obtain the respective results. The trouble about the measurement and estimation of electrical soil properties in congested urban areas is solved with the detailed methodology presented, based on non conventional measurement techniques and computational processing. The results obtained during both digital simulation and field measurements, demonstrates the validity of the

Strategies to optimize the electric energy use in non-residential buildings; Estrategias para eficientizar el uso de la energia electrica en edificios no residenciales

Energy Technology Data Exchange (ETDEWEB)

Castro Flores, J.; Morillon Galvez, D. [Comision Nacional para el Ahorro de Energia, Mexico, D. F. (Mexico)

1995-12-31

This paper presents the problems identified in non-residential buildings, where the inadequate use of energy is mainly shown in three points: inadequate technology and maintenance, wrong use and wrong habits in the energy use. The consequences of this situation in the ecological, politic and social environment were analyzed. In base of the problems detected the following strategies are proposed: An adequate project and design, retrofit, maintenance and users awareness for the rational energy use. The economic evaluation performed for the implementation of these strategies shows a significant saving potential of the electric power, with measures of null and low investment. [Espanol] Se presenta la problematica identificada en edificios no residenciales; donde el uso inadecuado de la energia electrica se manifiesta principalmente en tres puntos: tecnologia y mantenimiento inadecuados, y mal uso y costumbres de la energia. Se analizo las consecuencias de esta situacion en el ambito ecologico, economico, politico y social. Con base a la problematica se proponen las siguientes estrategias: un adecuado proyecto y diseno, retrofit, mantenimiento y concientizacion del usuario para el uso racional de la energia. La evaluacion economica realizada para implantar estas estrategias muestra un significativo potencial de ahorro de energia electrica, con medidas de nula y baja inversion.

Strategies to optimize the electric energy use in non-residential buildings; Estrategias para eficientizar el uso de la energia electrica en edificios no residenciales

Energy Technology Data Exchange (ETDEWEB)

Castro Flores, J; Morillon Galvez, D [Comision Nacional para el Ahorro de Energia, Mexico, D. F. (Mexico)

1996-12-31

This paper presents the problems identified in non-residential buildings, where the inadequate use of energy is mainly shown in three points: inadequate technology and maintenance, wrong use and wrong habits in the energy use. The consequences of this situation in the ecological, politic and social environment were analyzed. In base of the problems detected the following strategies are proposed: An adequate project and design, retrofit, maintenance and users awareness for the rational energy use. The economic evaluation performed for the implementation of these strategies shows a significant saving potential of the electric power, with measures of null and low investment. [Espanol] Se presenta la problematica identificada en edificios no residenciales; donde el uso inadecuado de la energia electrica se manifiesta principalmente en tres puntos: tecnologia y mantenimiento inadecuados, y mal uso y costumbres de la energia. Se analizo las consecuencias de esta situacion en el ambito ecologico, economico, politico y social. Con base a la problematica se proponen las siguientes estrategias: un adecuado proyecto y diseno, retrofit, mantenimiento y concientizacion del usuario para el uso racional de la energia. La evaluacion economica realizada para implantar estas estrategias muestra un significativo potencial de ahorro de energia electrica, con medidas de nula y baja inversion.

The electric energy in Mexico and the sustainable development; La energia electrica en Mexico y el desarrollo sustentable

Energy Technology Data Exchange (ETDEWEB)

Campos Aragon, Leticia [Instituto de Investigaciones Economicas, Universidad Nacional Autonoma de Mexico (UNAM), Mexico, D. F. (Mexico)

1997-12-31

This document explains the importance of the sustainable development in the electric energy, that is, that the technological advances in the electric sector do no hamper the future of the generations to come and generate potential problems such as: environmental pollution, unnecessary expenses in the realization of new technologies already executed. Mention is made of the relationship between nature and society, the ecological crisis, and the electric energy, seven points are given on how to control and treat waste waters, three points are given to handle and dispose of solid wastes, finally four points are given on the noise contamination control. It is concluded that the problem of reducing the environmental impact of the generation of electricity does not depend on the applied technology, since there are technological options for its solution, but on other more complex factors that deal with the generation of wealth, its distribution and the population growing [Espanol] En el presente documento se explica la importancia del desarrollo sustentable en la energia electrica, es decir que los avances tecnologicos en el sector energetico no entorpezcan el futuro de las generaciones venideras y generen posibles problemas como: contaminacion del medio ambiente, gastos innecesarios en la realizacion de las nuevas tecnologias realizadas. Se menciona la relacion entre la naturaleza y la sociedad, la crisis ecologica y la energia electrica, se dan siete puntos de como controlar y tratar aguas residuales, se proporcionan tres puntos para manejar y disponer de residuos solidos, por ultimo se dan cuatro puntos sobre el control de la contaminacion por ruido. Se concluye en que el problema de reducir el impacto ambiental por la generacion de electricidad no depende de la tecnologia empleada pues existen alternativas tecnologicas para su solucion, sino en otros aun mas complejos que tienen que ver con la generacion de la riqueza, su distribucion y el crecimiento de la poblacion

The optimization of electric motors repair techniques as a mean for electric energy saving; La optimizacion de las tecnicas de reparacion de motores electricos como un medio para ahorrar energia electrica

Energy Technology Data Exchange (ETDEWEB)

Zagal Leon, Juan Ruben [Fideicomiso para el Ahorro de Energia Electrica (FIDE), Mexico, D. F. (Mexico)

1998-12-31

This paper presents, in a very concise, which are the techniques to optimize the electric motors repair made by the Fideicomiso para el Ahorro de Energia Electrica (FIDE), the loss of efficiency that might exist after repairing an electric motor, as well as the procedures to perform an optimum reparation of the electric motors. Furthermore, some recommendations are given for the selection of an adequate rewinding shop to guarantee that the motor does not suffer efficiency losses after its repair. [Espanol] Este trabajo presenta, de manera muy concreta, cuales son las tecnicas para optimizar las tecnicas de reparacion de motores electricos realizado por el Fideicomiso para el Ahorro de Energia Electrica (FIDE), el nivel de perdida de eficiencia que puede existir despues de reparar un motor electrico, asi como los procedimientos para realizar una optima reparacion en motores electricos. Asimismo, se proporcionan algunas recomendaciones para seleccionar un taller de reembobinado adecuado para garantizar que el motor no sufra perdidas de eficiencia despues de su reparacion.

The optimization of electric motors repair techniques as a mean for electric energy saving; La optimizacion de las tecnicas de reparacion de motores electricos como un medio para ahorrar energia electrica

Energy Technology Data Exchange (ETDEWEB)

Zagal Leon, Juan Ruben [Fideicomiso para el Ahorro de Energia Electrica (FIDE), Mexico, D. F. (Mexico)

1999-12-31

This paper presents, in a very concise, which are the techniques to optimize the electric motors repair made by the Fideicomiso para el Ahorro de Energia Electrica (FIDE), the loss of efficiency that might exist after repairing an electric motor, as well as the procedures to perform an optimum reparation of the electric motors. Furthermore, some recommendations are given for the selection of an adequate rewinding shop to guarantee that the motor does not suffer efficiency losses after its repair. [Espanol] Este trabajo presenta, de manera muy concreta, cuales son las tecnicas para optimizar las tecnicas de reparacion de motores electricos realizado por el Fideicomiso para el Ahorro de Energia Electrica (FIDE), el nivel de perdida de eficiencia que puede existir despues de reparar un motor electrico, asi como los procedimientos para realizar una optima reparacion en motores electricos. Asimismo, se proporcionan algunas recomendaciones para seleccionar un taller de reembobinado adecuado para garantizar que el motor no sufra perdidas de eficiencia despues de su reparacion.

Planning the expansion of electrical transmission networks with evolutionary programming; Planeacion de la expansion de redes de transmision electrica con programacion evolucionaria

Energy Technology Data Exchange (ETDEWEB)

Ceciliano Meza, Jose Luis

1997-12-31

In this work it is presented for the first time in the literature the solution of the problem of the planning the expansion of an electrical transmission network (PERTE) with the use of the Evolutionary Programming. The evolutionary programming is a stochastic method of optimization with similar characteristics to the generic algorithms, but different. During the development of this work it is shown what each one of these two heuristic methods of optimization consist of. Additionally, the main characteristics of other two heuristic methods known in the literature are described (Tabu Searching and Simulated Annealing). These two methods together with the genetic algorithms and decomposition of Benders have also been used to solve the problem of planning PERTE. The operation of the proposed algorithm of evolutionary programming was tested in two networks of electrical transmission. The first case of test is a system which is known in the literature. The second case is a representative system of the electrical transmission network of Central America. The results obtained improve all the results shown when applying different heuristic methods of optimization (genetic algorithms, simulated annealing and Tabu searching) to solve the same problem. [Espanol] En este trabajo se presenta por primera vez en la literatura, la solucion del problema de la planeacion de expansion de una red de transmision electrica (PERTE) con el uso de la Programacion Evolucionaria. La programacion evolucionaria es un metodo estocastico de optimizacion con caracteristicas similares a los algoritmos geneticos, pero diferente. Durante el desarrollo de este trabajo se muestra en que consiste cada uno de estos dos metodos heuristicos de optimizacion. Ademas, se describen las caracteristicas principales de otros dos metodos heuristicos conocidos en la literatura (busqueda Tabu y Recorrido Simulado). Estos dos metodos juntos con los algoritmos geneticos y descomposicion de Benders tambien han sido

Energy saving in buildings through the elimination of typical problems; Ahorro de energia electrica en edificios a traves de la eliminacion de problemas tipicos

Energy Technology Data Exchange (ETDEWEB)

Ramirez Rivero, Alex G [Genertek, S. A. de C. V., Mexico, D. F. (Mexico)

1994-12-31

The enormous electric energy consumption in buildings represents an important area of saving opportunities. The design of installations without advanced technical illumination criteria, the absence of standardization over energy efficiency, the lack of observation of the existing standards and guides, the continuous load growth in existing installations and the lack of appropriate maintenance, are some of the causes of the inefficient use of electric energy in buildings. Although the problems, and consequently the solutions, are exclusive for each unit, some of the former are frequently repeated. In this paper the problems found along more than 40 audits conducted in large buildings of different types in Mexico city are commented. [Espanol] El enorme consumo de energia electrica en edificios representa una importante area de oportunidad para ahorro. El diseno de instalaciones sin criterios luminotecnicos avanzados, la ausencia de normalizacion sobre eficiencia energetica, la falta de observancia de las normas y recomendaciones vigentes, el continuo crecimiento de carga en instalaciones existentes y la falta de mantenimiento adecuado son algunas de las causas del uso ineficiente de la energia electrica en inmuebles. Aunque los problemas y por tanto las soluciones son particulares para cada unidad, algunos de los primeros se repiten frecuentemente. En este trabajo se comentan los problemas encontrados a lo largo de mas de 40 auditorias realizadas a inmuebles grandes de diversos tipos en la ciudad de Mexico.

Energy saving in buildings through the elimination of typical problems; Ahorro de energia electrica en edificios a traves de la eliminacion de problemas tipicos

Energy Technology Data Exchange (ETDEWEB)

Ramirez Rivero, Alex G. [Genertek, S. A. de C. V., Mexico, D. F. (Mexico)

1993-12-31

The enormous electric energy consumption in buildings represents an important area of saving opportunities. The design of installations without advanced technical illumination criteria, the absence of standardization over energy efficiency, the lack of observation of the existing standards and guides, the continuous load growth in existing installations and the lack of appropriate maintenance, are some of the causes of the inefficient use of electric energy in buildings. Although the problems, and consequently the solutions, are exclusive for each unit, some of the former are frequently repeated. In this paper the problems found along more than 40 audits conducted in large buildings of different types in Mexico city are commented. [Espanol] El enorme consumo de energia electrica en edificios representa una importante area de oportunidad para ahorro. El diseno de instalaciones sin criterios luminotecnicos avanzados, la ausencia de normalizacion sobre eficiencia energetica, la falta de observancia de las normas y recomendaciones vigentes, el continuo crecimiento de carga en instalaciones existentes y la falta de mantenimiento adecuado son algunas de las causas del uso ineficiente de la energia electrica en inmuebles. Aunque los problemas y por tanto las soluciones son particulares para cada unidad, algunos de los primeros se repiten frecuentemente. En este trabajo se comentan los problemas encontrados a lo largo de mas de 40 auditorias realizadas a inmuebles grandes de diversos tipos en la ciudad de Mexico.

Power quality. Analysis of the losses related to the tension and current distortion in the electric network; Calidad de la energia electrica. Analisis de las perdidas relacionadas con la distorsion de la tension y corriente de la red electrica

Energy Technology Data Exchange (ETDEWEB)

Rauch Sitar, Vladimir [Universidad Autonoma de Queretaro, Facultad de Ingenieria, Queretaro (Mexico)

1994-12-31

In recent times every day one speaks more about power quality and about the losses produced by the tension and current distortion. The distortion in the electric network and the consumption tend to keep on increasing, and each day there will be the need of applying more resources to handle it inside a reasonable range. In this article the situation of the power quality is analyzed in the most general case and also simplified for special cases. On base on the distortion coefficients of tension and current a matrix is created where the harmonics coefficients of tension as well as the current appear in an organized form an all of the elements of that matrix are analyzed. Some topological rules are created in order to give the simplest orientation in the complex situation. The article is useful to supervise the power quality in all of the typical cases and establish a base for a more detailed analysis. [Espanol] En los ultimos tiempos cada dia mas se esta hablando sobre la calidad de la energia electrica (Power Quality) y sobre las perdidas provocadas con este factor. La distorsion de la red electrica y del consumo tiene la tendencia de seguir aumentando y cada dia mas habra que dedicar mas recursos para manejarla dentro de un rango razonable. En el articulo presentado se analiza la situacion de la calidad de energia en caso mas general y tambien simplificada para los casos especiales. A base de coeficientes de distorsion, de tension y corriente se crea una Matriz donde figuran tanto los coeficientes de armonicas de tension como de corriente en una forma ordenada y se analizan todos los elementos de esta matriz. Se crean algunas reglas topologicas para dar la orientacion mas simple en la situacion compleja. El articulo sirve para dar supervision a la calidad de energia en todos los casos tipicos y establecer una base para el analisis mas detallado.

Magnetic losses and reactance change by the use of metallic conduit in electrical installations; Perdidas magneticas y cambio de reactancia por la tuberia metalica en instalaciones electricas

Energy Technology Data Exchange (ETDEWEB)

Campero Littlewood, Eduardo; Castaneda D, Miguel; Castulo A, Roberto; Bratu Serban, Neagu [Universidad Autonoma Metropolitana-Azcapotzalco, Mexico, D. F. (Mexico)

1996-12-31

In this paper are presented the results obtained in the measurement of magnetic losses in metallic conduits in electric installations. The losses for parasitic currents and by hysteresis were obtained in different conditions of magnetic density, caused by the net current resulting from the sum of all the currents of all the conductors that travel along the conduit. These currents are named differential currents, and the conditions in which they appear in the electric installations are described. The magnetic induction phenomenon that occurs in metallic conduit is briefly described and the basic concepts that describe it. A theoretical-experimental methodology is offered to quantify the energy losses by parasitic currents and by the metal magnetization in these metallic conduits. At the same time, the impact of these differential currents impact in the reactance of the electric installation is quantified. The obtained results for twelve conduits of different diameters and different wall thickness are shown. A comparison analysis is made with the reported results in a previous article, where the losses were estimated by means of the temperature rise measurement of the metallic wall. [Espanol] En este articulo se presentan los resultados obtenidos en la medicion de perdidas magneticas en tuberias conduit (metalicas) en instalaciones electricas. Las perdidas por corrientes parasitas y por histeresis se obtuvieron para diferentes condiciones de densidad magnetica, provocada por la corriente neta resultante de la suma de las corrientes de todos los conductores que viajan por la tuberia. A estas corrientes se les designa corrientes diferenciales y se describen las condiciones en las que estas aparecen en las instalaciones electricas. Se explica brevemente el fenomeno de induccion magnetica que se presenta en las tuberias metalicas y los conceptos basicos que la describen. Se plantea una metodologia teorico-experiemental para cuantificar las perdidas de energia, por

Magnetic losses and reactance change by the use of metallic conduit in electrical installations; Perdidas magneticas y cambio de reactancia por la tuberia metalica en instalaciones electricas

Energy Technology Data Exchange (ETDEWEB)

Campero Littlewood, Eduardo; Castaneda D, Miguel; Castulo A, Roberto; Bratu Serban, Neagu [Universidad Autonoma Metropolitana-Azcapotzalco, Mexico, D. F. (Mexico)

1997-12-31

In this paper are presented the results obtained in the measurement of magnetic losses in metallic conduits in electric installations. The losses for parasitic currents and by hysteresis were obtained in different conditions of magnetic density, caused by the net current resulting from the sum of all the currents of all the conductors that travel along the conduit. These currents are named differential currents, and the conditions in which they appear in the electric installations are described. The magnetic induction phenomenon that occurs in metallic conduit is briefly described and the basic concepts that describe it. A theoretical-experimental methodology is offered to quantify the energy losses by parasitic currents and by the metal magnetization in these metallic conduits. At the same time, the impact of these differential currents impact in the reactance of the electric installation is quantified. The obtained results for twelve conduits of different diameters and different wall thickness are shown. A comparison analysis is made with the reported results in a previous article, where the losses were estimated by means of the temperature rise measurement of the metallic wall. [Espanol] En este articulo se presentan los resultados obtenidos en la medicion de perdidas magneticas en tuberias conduit (metalicas) en instalaciones electricas. Las perdidas por corrientes parasitas y por histeresis se obtuvieron para diferentes condiciones de densidad magnetica, provocada por la corriente neta resultante de la suma de las corrientes de todos los conductores que viajan por la tuberia. A estas corrientes se les designa corrientes diferenciales y se describen las condiciones en las que estas aparecen en las instalaciones electricas. Se explica brevemente el fenomeno de induccion magnetica que se presenta en las tuberias metalicas y los conceptos basicos que la describen. Se plantea una metodologia teorico-experiemental para cuantificar las perdidas de energia, por

Electric protections based in microprocessors in power plants; Protecciones electricas basadas en microprocesadores en centrales generadoras

Energy Technology Data Exchange (ETDEWEB)

Libreros, Domitilo; Castanon Jimenez, Jose Ismael [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1988-12-31

This article is centered around the substitution of the conventional electric protections of a power plant in connection type unit for protections based in microprocessors. A general model of conventional protection of a power plant is described and the number of analogic and digital signals that intervene in that model are quantified. A model is setup for power plant protection with microprocessors, analyzing each one of the modules that would form it. Finally, the algorithms to carry on such protection are presented. [Espanol] Este articulo se centra en torno a la sustitucion de las protecciones electricas convencionales de una central generadora en conexion tipo unidad por protecciones basadas en microprocesadores. Se describe el modelo general de proteccion convencional de una central generadora y se cuantifica el numero de senales analogicas y digitales que interviene en dicho modelo. Se propone un modelo para proteccion de centrales generadoras mediante microprocesadores, analizandose cada uno de los modulos que lo conformarian. Finalmente, se presentan los algoritmos para realizar dicha proteccion.

Electric protections based in microprocessors in power plants; Protecciones electricas basadas en microprocesadores en centrales generadoras

Energy Technology Data Exchange (ETDEWEB)

Libreros, Domitilo; Castanon Jimenez, Jose Ismael [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1987-12-31

This article is centered around the substitution of the conventional electric protections of a power plant in connection type unit for protections based in microprocessors. A general model of conventional protection of a power plant is described and the number of analogic and digital signals that intervene in that model are quantified. A model is setup for power plant protection with microprocessors, analyzing each one of the modules that would form it. Finally, the algorithms to carry on such protection are presented. [Espanol] Este articulo se centra en torno a la sustitucion de las protecciones electricas convencionales de una central generadora en conexion tipo unidad por protecciones basadas en microprocesadores. Se describe el modelo general de proteccion convencional de una central generadora y se cuantifica el numero de senales analogicas y digitales que interviene en dicho modelo. Se propone un modelo para proteccion de centrales generadoras mediante microprocesadores, analizandose cada uno de los modulos que lo conformarian. Finalmente, se presentan los algoritmos para realizar dicha proteccion.

Calculation of electromagnetic fields in electric machines by means of the finite element. Algorithms for the solution of problems with known total densities. Pt. 2; Calculo de campos electromagneticos en maquinas electricas mediante elemento finito. Algoritmos para la solucion de problemas con densidades totales conocidas. Pt. 2

Energy Technology Data Exchange (ETDEWEB)

Rosales, Mauricio F [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1988-12-31

This article is based in the electromagnetic modeling presented in the first part. Here are only considered the magnetic systems or electric systems in closed regions with moving or axial symmetry, whose total current density or total electric load density is known. The algorithms that have been implanted in the software CLIIE-2D of the Instituto de Investigaciones Electricas (IIE) are developed in order to obtain numerical solutions for these problems. The basic systems of algebraic equations are obtained by means of the application of the Galerkin method in the discreteness of the finite element with first order triangular elements. [Espanol] Este articulo se basa en la modelacion electromagnetica presentada en la primera parte. Aqui solo se consideran sistemas magneticos o sistemas electricos en regiones cerradas con simetria translacional o axial, cuya densidad de corriente total o densidad de carga electrica total es conocida. Se desarrollan los algoritmos que se han implantado en el programa de computo CLIIE-2D, del Instituto de Investigaciones Electricas (IIE) con el fin de obtener soluciones numericas para estos problemas. Los sistemas basicos de ecuaciones algebraicas se obtienen mediante la aplicacion del metodo de Galerkin en la discretizacion de elemento finito con elementos triangulares de primer orden.

Calculation of electromagnetic fields in electric machines by means of the finite element. Algorithms for the solution of problems with known total densities. Pt. 2; Calculo de campos electromagneticos en maquinas electricas mediante elemento finito. Algoritmos para la solucion de problemas con densidades totales conocidas. Pt. 2

Energy Technology Data Exchange (ETDEWEB)

Rosales, Mauricio F. [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1987-12-31

This article is based in the electromagnetic modeling presented in the first part. Here are only considered the magnetic systems or electric systems in closed regions with moving or axial symmetry, whose total current density or total electric load density is known. The algorithms that have been implanted in the software CLIIE-2D of the Instituto de Investigaciones Electricas (IIE) are developed in order to obtain numerical solutions for these problems. The basic systems of algebraic equations are obtained by means of the application of the Galerkin method in the discreteness of the finite element with first order triangular elements. [Espanol] Este articulo se basa en la modelacion electromagnetica presentada en la primera parte. Aqui solo se consideran sistemas magneticos o sistemas electricos en regiones cerradas con simetria translacional o axial, cuya densidad de corriente total o densidad de carga electrica total es conocida. Se desarrollan los algoritmos que se han implantado en el programa de computo CLIIE-2D, del Instituto de Investigaciones Electricas (IIE) con el fin de obtener soluciones numericas para estos problemas. Los sistemas basicos de ecuaciones algebraicas se obtienen mediante la aplicacion del metodo de Galerkin en la discretizacion de elemento finito con elementos triangulares de primer orden.

Hydraulic turbines uses for rural electric generation; Utilizacion de microturbinas para la generacion electrica en el medio rural

Energy Technology Data Exchange (ETDEWEB)

Genta, J [Facultad de Ingenieria, Instituto de Mecanica de Fluidos e Ingenieria Ambiental, Montevideo, (Uruguay); Nunes, V [Facultad de Ingenieria, Instituto de Ingenieria Electrica, Montevideo, (Uruguay)

1994-07-01

The micro turbines use for electric generation either in autonomous systems or in connection to the national net is presented like an alternative whose viability has been studied in the Agreement taken place between the UTE Administracion Nacional de Usinas y transmisiones Electricas y la Facultad de Ingenieria. The Agreement {sup S}tudy for the Installation of Micro turbines that initially considered areas far from the national electric net it extended then to near areas to the same one to analyze the cogeneration alternative. They were considered smaller and bigger powers than 1 MW and up to 5MW. For the whole study range a methodology is described of calculate primary, starting from a minimum of field information that allows a first estimate of viability of a certain place and the selection of the turbine type, for a later detailed study.

Energy saving by means of air conditioning equipment replacement and the household application of thermal insulation; Ahorro de energia electrica por reemplazo de equipos de aire acondicionado y aplicacion de aislamiento termico en viviendas

Energy Technology Data Exchange (ETDEWEB)

Peralta Solorio, Jose Luis [Fideicomiso para el Ahorro de la Energia (Mexico)

2005-07-15

An extension study of the Financing Program for Energy Saving looked for the evaluation of the electric energy saving potential obtained by the replacement of air conditioning equipment and the application of thermal insulation in 30 houses of two Mexican cities with warmth climate. In a joint effort with Comision Federal de Electricidad the consumption files of the users were analyzed and field measurements of electric demand and of refrigeration were made. As a following step the change of the refrigeration necessities derived from the application of thermal insulation were evaluated as well as the energy efficiency improvement obtained by the substitution of the air conditioning equipment and the favorable results obtained by the implementation of both measures - thermal insulation and change of air conditioning equipment in a joint form. This way, as a conclusion, the optimum sequence of application of these measures is revealed. [Spanish] Un estudio extension del Programa de Financiamiento para el Ahorro de Energia Electrica busco evaluar el potencial de ahorro de energia electrica alcanzado por el reemplazo de equipos de aire acondicionado y la aplicacion de aislamiento termico en 30 viviendas de dos ciudades mexicanas con clima calido. En un esfuerzo conjunto con la Comision Federal de Electricidad se analizaron los historiales de consumo de los usuarios y se efectuaron las mediciones de campo de demanda electrica y de refrigeracion. Como paso siguiente se valoro el cambio en las necesidades de refrigeracion derivado de la aplicacion de aislamiento termico al igual que la mejora en eficiencia energetica obtenida por la sustitucion de aire acondicionado y se identificaron los resultados favorecedores arrojados por la implementacion de ambas medidas -aislamiento termico y cambio de equipo de aire acondicionado- en forma conjunta. De esta manera, como conclusion, se devela la mas optima secuencia de aplicacion de estas medidas.

Design of a grounding network in electrical substations. Materials and formulas the most used; Diseno de redes de tierra en subestaciones electricas. Materiales y formulas mas utilizadas

Energy Technology Data Exchange (ETDEWEB)

Raull Martin, J. [Facultad de Ingenieria, UNAM, Mexico, D.F. (Mexico)

2000-09-01

The purpose of this paper is to present a summarized version of the different types of construction of grounding systems, as well as their materials and formulas, which are necessary and useful for the design and building of a grounding network for medium to high voltage facilities. A description is also made of how to determine the electrical resistivity of subsoil layers with different physical characteristics. Several illustrative examples are also solved in the paper. [Spanish] El proposito de este articulo es presentar de manera resumida los diferentes tipos de construccion de los sistemas de tierra, asi como sus materiales y formulas, los cuales son necesarios y utiles para el diseno y edificacion de una red de tierra para instalaciones de mediana y alta tension. Se describe tambien la obtencion de las diferentes resistividades que presenta los terrenos con diversas caracteristicas fisicas. Asimismo, se solucionan ejercicios ilustrativos a lo largo del articulo.

The Biogas from bio-energy electrical power plant of Nuevo Leon; Central electrica de biogas de bioenergia de Nuevo Leon

Energy Technology Data Exchange (ETDEWEB)

Arvizu F, Jose L [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico); Saldana M, Jaime L [Sistemas de Energia Internacional S.A. de C.V. (Mexico)

2005-07-01

The biogas from bio-energy electrical power plant of Nuevo Leon represents, in all the national territory, the first experience on the advantage of biogas emitted by the sanitary landfills for the generation of electrical energy. Therefore, one of the specific objectives of this paper is the one of diffusion and reproduction of the same one in other cities of Mexico and Latin America. The project is framed within the world-wide policies on the control of emissions for the reduction of the greenhouse effect gases (GEG) and its impact in the global climatic change. The gas emitted by the trash sanitary landfills, commonly known as biogas, is a gas mixture derived from the decomposition of the organic matter of the municipal trash by microorganisms in anaerobic conditions. Biogas generated in the sanitary landfills has a methane content of 55% and a 35% of carbon dioxide. The balance 10% is made up of water steam, hydrogen, nitrogen, oxygen, hydrogen sulfur and other gases in minimum amounts. [Spanish] La Central Electrica de Biogas de Bioenergia de Nuevo Leon representa, en todo el territorio nacional, la primera experiencia sobre el aprovechamiento del biogas emitido por los rellenos sanitarios para la generacion de energia electrica. Por esta razon, uno de los objetivos especificos de este trabajo es la de difusion y reproduccion del mismo en otras ciudades de Mexico y Latinoamerica. El proyecto esta enmarcado dentro de las politicas mundiales sobre el control de emisiones para la reduccion de los gases de efecto invernadero (GEI) y su impacto en el cambio climatico global. El gas emitido por la basura dispuesta en los rellenos sanitarios, comunmente conocido como biogas, es una mezcla de gases derivado de la descompensacion de la materia organica de la basura municipal por microorganismos en condiciones anaerobias. El biogas generado en los rellenos sanitarios tiene un contenido de metano del 55% y un 35% de bioxido de carbono. El 10% restante se compone de vapor

Wind energy for electricity generation; Generacion electrica con energia del viento

Energy Technology Data Exchange (ETDEWEB)

Huacuz Villamar, Jorge M; Borja Diaz, Marco Antonio R. [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1998-09-01

A description is made of electricity generation utilizing wind energy (Eoloelectric Generation). The case of Mexico is reviewed in respect to this technology, mentioning a small power plant of 1.5 Megawatts installed by the Comision Federal de Electricidad in the zone of La Ventosa in the State of Oaxaca. Mention is made of the possible causes why Mexico has not advanced in this type of power plants for power generation as in other countries like Germany, Spain and India. The advance in these countries is shown as well as the growth statistics of the wind power in the world. It is concluded that there is not in Mexico a strategy for wind energy utilization for electricity generation in spite of the potential benefits this technology offers [Espanol] Se describe el caso de la generacion electrica utilizando la energia del viento (Generacion Eoloelectrica). Se aborda el caso de Mexico respecto a esta tecnologia, mencionando una pequena central de 1.5 Megawatts (MW) instalada por la Comision Federal de Electricidad (CFE) en la zona de la Ventosa, Oaxaca. Se mencionan las posibles causas por las que en Mexico este tipo de centrales de generacion de energia no ha avanzado como en otros paises, por ejemplo: Alemania, Espana y la India. Se muestran los avances de estos paises, asi como una estadistica del crecimiento de la generacion eoloelectrica en el mundo. Se concluye en que no existe en Mexico una estrategia para la generacion eoloelectrica a pesar de los beneficios potenciales que ofrece esta tecnologia

A microwave technique for electrical conductivity measurements in semiconductors; Un procedimiento en frecuencia de microondas para la medicion de la conductividad electrica en semiconductores

Energy Technology Data Exchange (ETDEWEB)

Ramirez, A; Zehe, A [Benemerita Universidad Autonoma de Puebla, Puebla (Mexico); Starostenko, O [Universidad de las Americas, Puebla, (Mexico); Perez, L [Benemerita Universidad Autonoma de Puebla, Puebla (Mexico)

2003-01-15

In the present paper a theoretical approach is given together with the description of the experimental technique for electrical conductivity measurements of semiconductors in frequency range of 10 GHz, corresponding to a wavelength of {lambda}= 3 cm. It is shown, that the sample conductivity, measured without the need of electrical contacts, Is practically identical with results obtained by direct current methods. The potential use of the method for dielectric measurements in samples of general shape is included in the discussion. Given that the local electrical field is known only in bodies of ellipsoidal shape, one has to apply approximation methods for sample shapes of practical relevance (cylinders, cubes, disks). Finally, the measuring range and corresponding errors are explained on the base of measurements realized with silicon samples. [Spanish] En el presente trabajo se desarrolla la teoria junto con la descripcion del arreglo experimental para la medicion de la conductividad electrica en muestras semiconductoras, utilizando un campo de microondas de {lambda}= 3 cm, correspondiente a una frecuencia n de 10 GHz. Se demuestra que la conductividad electrica medida sin la necesidad de contactos electricos es practicamente identica con resultados obtenidos por el metodo comun utilizando corriente directa (d.c.). Se incorpora en la discusion ademas el potencial del metodo para el estudio de propiedades dielectricas en muestras de geometria general. Dado que solamente en cuerpos con geometria elipsoidal se conoce bien el campo electrico local, y con esto el momento bipolar inducido, para muestras de geometrias mas practicas (cilindros, cubos, discos) se acude a metodos de aproximacion. Finalmente, se discute el rango de mediciones y errores, y se presentan mediciones concretas, utilizando muestras de silicio.

The use of reflecting paints on building`s roofs for energy saving; Uso de pinturas reflejantes en los techos de las edificaciones para el ahorro de energia electrica

Energy Technology Data Exchange (ETDEWEB)

Valera Negrete, Jose Adrian [Programa de Ahorro de Energia del Sector Electrico (PAESE), Comision Federal de Electricidad, Mexico, D. F. (Mexico); Sanchez Soto, Ramon [Facultad de Ingenieria, Departamento de Termoenergia de la UNAM, Mexico, D. F. (Mexico)

1998-12-31

This paper shows the effects of the use of reflecting paints in different colors on the buildings roofs and the results in energy saving obtained in a field test carried on in Monterrey, Nuevo Leon State of Mexico using aluminum paint. [Espanol] El presente trabajo muestra los efectos del uso de pinturas reflejantes de diferentes colores en los techos de edificaciones, y los resultados de ahorro de energia electrica obtenidos en una prueba de campo efectuada en Monterrey, Nuevo Leon, Mexico, utilizando pintura de aluminio.

The use of reflecting paints on building`s roofs for energy saving; Uso de pinturas reflejantes en los techos de las edificaciones para el ahorro de energia electrica

Energy Technology Data Exchange (ETDEWEB)

Valera Negrete, Jose Adrian [Programa de Ahorro de Energia del Sector Electrico (PAESE), Comision Federal de Electricidad, Mexico, D. F. (Mexico); Sanchez Soto, Ramon [Facultad de Ingenieria, Departamento de Termoenergia de la UNAM, Mexico, D. F. (Mexico)

1999-12-31

This paper shows the effects of the use of reflecting paints in different colors on the buildings roofs and the results in energy saving obtained in a field test carried on in Monterrey, Nuevo Leon State of Mexico using aluminum paint. [Espanol] El presente trabajo muestra los efectos del uso de pinturas reflejantes de diferentes colores en los techos de edificaciones, y los resultados de ahorro de energia electrica obtenidos en una prueba de campo efectuada en Monterrey, Nuevo Leon, Mexico, utilizando pintura de aluminio.

FAULT RESISTANCE AND SOIL RESISTIVITY INFLUENCE ON THE IMPEDANCE BASED METHODS FOR LOCATING FAULTS. A COMPARATIVE ANALYSIS

Directory of Open Access Journals (Sweden)

JUAN MORA FLÓREZ

2010-01-01

Full Text Available En este artículo se analiza de forma comparativa la influencia de la resistividad del suelo y la resistencia de la falla en un método basado en la estimación de la impedancia para localización de fallas. Las pruebas se realizan en un sistema real de distribución, usando medidas de resistividad tomadas directamente en campo, así como valores de las resistencias de falla comúnmente encontradas para estos sistemas de potencia. Según los resultados en un sistema de distribución de 34,5 kV, los modelos de resistividad que mejor representan a los sistemas reales permiten obtener mejores resultados en la localización de fallas. dicionalmente, en la medida que el valor de la resistencia aumenta, menor es el desempeño del localizador, lo cual muestra la gran influencia de esta variable. De otra parte, se demuestra la influencia de la resistividad del terreno en la estimación del sitio de falla, en aquellos casos donde existe corriente de secuencia cero.

The Spanish energetic mix; prevision and historic evolution of the electric production structure; El mix energetico espanol; evolucion historica y prevista de la estructura de produccion electrica

Energy Technology Data Exchange (ETDEWEB)

Revuelta, J.; Lopez Sanz, R.

2010-07-01

This article describes the past and forecasted evolution of the electric production of the Spanish system (excluding the Spanish isolated systems), according to the records of the System Operator, Red Electrica de Espana, and the studies of its Network Planning department. The behaviour of the demand is analysed, as well as the evolution of the generation mix. The article expose the main recent changes the sector has undergone and points out the main future challenge it will face regarding the forecasted evolution of the demand, the integration of renewable energy sources, and the energy objectives established at European and national level. (Author)

Electric energy saving in the cellulose and paper industry; Ahorro de energia electrica en la industria de celulosa y papel

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-12-31

This paper delineates the results of the demonstration project for electric energy saving, which is one of the twenty four projects in which the Fideicomiso de Apoyo al Programa de Ahorro de Energia (FIDE) sponsors the diagnosis as well as the applied measures and the measures currently in application. Also the potential opportunity areas and the measures applied and in course of application, as well as the required investments and their recuperation periods. [Espanol] En este trabajo se describen los resultados del proyecto de demostracion de ahorro de energia electrica que es uno de los veinticuatro proyectos, en los que el Fideicomiso de Apoyo al Programa de Ahorro de Energia (FIDE) financia tanto el diagnostico como la aplicacion de medidas. Se presentan tanto las areas de oportunidad, potenciales y medidas aplicadas y en aplicacion, asi como las inversiones requeridas y los periodos de recuperacion de las mismas.

Electric energy saving in the cellulose and paper industry; Ahorro de energia electrica en la industria de celulosa y papel

Energy Technology Data Exchange (ETDEWEB)

NONE

1992-12-31

This paper delineates the results of the demonstration project for electric energy saving, which is one of the twenty four projects in which the Fideicomiso de Apoyo al Programa de Ahorro de Energia (FIDE) sponsors the diagnosis as well as the applied measures and the measures currently in application. Also the potential opportunity areas and the measures applied and in course of application, as well as the required investments and their recuperation periods. [Espanol] En este trabajo se describen los resultados del proyecto de demostracion de ahorro de energia electrica que es uno de los veinticuatro proyectos, en los que el Fideicomiso de Apoyo al Programa de Ahorro de Energia (FIDE) financia tanto el diagnostico como la aplicacion de medidas. Se presentan tanto las areas de oportunidad, potenciales y medidas aplicadas y en aplicacion, asi como las inversiones requeridas y los periodos de recuperacion de las mismas.

Coal quality estimation using the geophysical logging of natural gamma and resistivity; Estimativa de qualidade de carvao por meio de perfilagem geofisica de gama natural e resistividade

Energy Technology Data Exchange (ETDEWEB)

Souza, Vladia de; Salvadoretti, Paulo; Costa, Joao Felipe Coimbra Leite; Beretta, Filipe; Koppe, Jair Carlos, E-mail: vladiasouza@gmail.co, E-mail: psalvadoretti@ufrgs.b, E-mail: jfelipe@ufrgs.b, E-mail: fberetta@ymail.co, E-mail: jkoppe@ufrgs.b [Universidade Federal do Rio Grande do Sul (UFRGS/LPM/DEMIN), Porto Alegre, RS (Brazil). Dept. de Engenharia de Minas. Lab. de Pesquisa Mineral e Planejamento Mineiro; Bastiani, Gustavo Antonio; Carvalho Junior, Jose Adolfo; Grigorieff, Alexandre, E-mail: gustavo.bastiani@terra.com.b, E-mail: adolfo@copelmi.com.b, E-mail: alex@copelmi.com.b [COPELMI Mineracao, Porto Alegre, RS (Brazil)

2010-10-15

This study investigates geophysical logging as a tool to predict coal quality. Some of the coal's chemical parameters were determined by laboratory analysis and were compared against values derived from geophysical logging correlation (natural gamma radiation and resistivity versus ash content, specifically). The results showed a strong correlation between the coal's natural gamma emissions and their ash content. From this correlation, a simple linear model was obtained and used to estimate ash grades, directly from geophysical logging records. The error of these predictions is less than {+-} 5%. Additionally, results showed no correlation between the sulphur grade, or volatile matter, and the geophysical records. Ash grades derived from natural gamma ray values can be used as secondary information to evaluate coal quality during resource estimation, when combined with lab analysis and appropriate geostatistical methods. The methodology is illustrated by means of a case study at a coal deposit located in Southern Brazil. (author)

Mapeamento Da Superfície Basal Do Manto De Intemperismo Pelo Comportamento Da Resistidade Elétrica Do Distrito Federal

Directory of Open Access Journals (Sweden)

Éder de Souza Martins

2008-11-01

Full Text Available Este trabalho apresenta o mapeamento do manto de intemperismo pelo comportamento da resitividade elétrica do Distrito Federal. O levantamento foi realizado entre 2004 e 2005, constituído de 260 sondagens elétricas verticais, que alcançam até 48 m de profundidade aparente, e de 10 estações de monitoramento mensal da resistividade elétrica para avaliação das variações sazonais. Os resultados mostraram que o comportamento da resistividade elétrica depende das características físicas do solo, das alterações de umidade relacionadas com as variações de pluviosidade e da posição na paisagem. Solos rasos apresentam um comportamento de aumento da resistividade elétrica com a profundidade, enquanto solos profundos mostram diversos padrões que se relacionam com o lençol freático, onde a resistividade elétrica é mais baixa. O comportamento da profundidade da camada mais condutiva pode ser relacionado com a superfície basal de etchplanos da região estudada.

Electric energy saving and its impact in the mining industry; El ahorro de energia electrica y su impacto en la industria minera

Energy Technology Data Exchange (ETDEWEB)

Urteaga Dufour, Jose Antonio [Fideicomiso de Apoyo al Programa de Ahorro de Energia del Sector Electrico (FIDE), Mexico, D. F. (Mexico)

1994-12-31

In this paper are shown the most important results of the energy diagnosis performed in some representative industries of the mining industry, where opportunity areas were detected in electric energy saving, starting from those measures that do not require investment up to the ones that require medium investment, recoverable in less than two years terms as a maximum and with electric energy saving ranging from 10% to 25%. [Espanol] En este trabajo, se presentan los resultados mas importantes, obtenidos en el diagnostico energetico realizado en algunas empresas representativas de la rama de la mineria, en donde se detectaron areas de oportunidad de ahorro de energia electrica que van desde aquellas medidas que no requieren inversiones hasta las que requieren medianas inversiones, recuperables en menos de dos anos como maximo y con ahorros de energia que van desde un 10% hasta un 25%.

Electric energy saving and its impact in the mining industry; El ahorro de energia electrica y su impacto en la industria minera

Energy Technology Data Exchange (ETDEWEB)

Urteaga Dufour, Jose Antonio [Fideicomiso de Apoyo al Programa de Ahorro de Energia del Sector Electrico (FIDE), Mexico, D. F. (Mexico)

1993-12-31

In this paper are shown the most important results of the energy diagnosis performed in some representative industries of the mining industry, where opportunity areas were detected in electric energy saving, starting from those measures that do not require investment up to the ones that require medium investment, recoverable in less than two years terms as a maximum and with electric energy saving ranging from 10% to 25%. [Espanol] En este trabajo, se presentan los resultados mas importantes, obtenidos en el diagnostico energetico realizado en algunas empresas representativas de la rama de la mineria, en donde se detectaron areas de oportunidad de ahorro de energia electrica que van desde aquellas medidas que no requieren inversiones hasta las que requieren medianas inversiones, recuperables en menos de dos anos como maximo y con ahorros de energia que van desde un 10% hasta un 25%.

Anaerobic/aerobic treatment for the waste water from the Instituto de Investigaciones Electricas installations; Tratamiento anaerobio-aerobio de las aguas residuales de las instalaciones del IIE

Energy Technology Data Exchange (ETDEWEB)

Arvizu Fernandez, Jose Luis [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1996-12-31

The waste water treatment plant of the Instituto de Investigaciones Electricas (IIE) is analyzed. This plant originally was a plant of the activated sludge type (aerobic development), process that consumes large amounts of energy and that produces residual sludge 5 or 6 times greater than the anaerobic processes. The methodology and the techniques utilized were base in the analysis of the existing plant introducing an anaerobic treatment and performing laboratory experimentation. The plant design parameters considered are described. The results show the benefits of treating by anaerobic means the waste waters since depuration are obtained on the order of 75%, as well as the reduction of resulting residual sludge and in energy consumption. A reduction of 60% to 70% can be attained if a combination of anaerobic and aerobic processes is utilized [Espanol] Se analiza la planta de tratamiento de aguas residuales del Instituto de Investigaciones Electricas (IIE). Esta planta era originalmente una planta de lodos activados (desarrollo aerobio), proceso que consume mucha energia y genera lodos residuales de 5 a 6 veces mas que los procesos anaerobios. La metodologia y las tecnicas utilizadas se basaron en el analisis de la planta de tratamiento existente en el IIE; en la caracterizacion residual del IIE; en la modificacion de la planta de tratamiento introduciendo un tratamiento anaerobio y efectuando experimentacion en laboratorio. Se describen los parametros de diseno de la planta considerados. Los resultados muestran los beneficios de tratar por medios anaerobios las aguas residuales ya que se obtienen depuraciones del orden del 75%, asi como la reduccion de lodos residuales resultantes y el consumo de energia, pueden reducirse de un 60% a un 70% si se utiliza la combinacion de los procesos anaerobios y aerobios

Anaerobic/aerobic treatment for the waste water from the Instituto de Investigaciones Electricas installations; Tratamiento anaerobio-aerobio de las aguas residuales de las instalaciones del IIE

Energy Technology Data Exchange (ETDEWEB)

Arvizu Fernandez, Jose Luis [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1997-12-31

The waste water treatment plant of the Instituto de Investigaciones Electricas (IIE) is analyzed. This plant originally was a plant of the activated sludge type (aerobic development), process that consumes large amounts of energy and that produces residual sludge 5 or 6 times greater than the anaerobic processes. The methodology and the techniques utilized were base in the analysis of the existing plant introducing an anaerobic treatment and performing laboratory experimentation. The plant design parameters considered are described. The results show the benefits of treating by anaerobic means the waste waters since depuration are obtained on the order of 75%, as well as the reduction of resulting residual sludge and in energy consumption. A reduction of 60% to 70% can be attained if a combination of anaerobic and aerobic processes is utilized [Espanol] Se analiza la planta de tratamiento de aguas residuales del Instituto de Investigaciones Electricas (IIE). Esta planta era originalmente una planta de lodos activados (desarrollo aerobio), proceso que consume mucha energia y genera lodos residuales de 5 a 6 veces mas que los procesos anaerobios. La metodologia y las tecnicas utilizadas se basaron en el analisis de la planta de tratamiento existente en el IIE; en la caracterizacion residual del IIE; en la modificacion de la planta de tratamiento introduciendo un tratamiento anaerobio y efectuando experimentacion en laboratorio. Se describen los parametros de diseno de la planta considerados. Los resultados muestran los beneficios de tratar por medios anaerobios las aguas residuales ya que se obtienen depuraciones del orden del 75%, asi como la reduccion de lodos residuales resultantes y el consumo de energia, pueden reducirse de un 60% a un 70% si se utiliza la combinacion de los procesos anaerobios y aerobios

System for the reliability analysis of the electric energy supply; Sistema para el analisis de confiabilidad del suministro de energia electrica

Energy Technology Data Exchange (ETDEWEB)

Perales, Favio; Martinez, Javier; Huesca, Francisco; Garcia, Norma; Nieva, Rolando [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1997-12-31

A computer tool, developed for the reliability evaluation of the electric energy supply, considering the faults in the generation and transmission systems, is presented. The application of the tool in planning the expansion and operation of the electric systems, the methodology of the solution employed and the various functions it accounts for, are described. At the end some illustrative examples of its applications by means of the studies with a model of representative characteristics of the interconnected national system. [Espanol] Se presenta una herramienta computacional desarrollada para evaluar la confiabilidad del suministro de energia electrica, considerando las fallas en los sistemas de generacion y transmision. Se describen las aplicaciones de la herramienta en la planeacion de la expansion y de la operacion de sistemas electricos, la metodologia de solucion empleada y las diversas funciones con que cuenta. Al final se presentan algunos ejemplos ilustrativos de sus aplicaciones mediante estudios con un modelo de caracteristicas representativas del sistema interconectado nacional.

System for the reliability analysis of the electric energy supply; Sistema para el analisis de confiabilidad del suministro de energia electrica

Energy Technology Data Exchange (ETDEWEB)

Perales, Favio; Martinez, Javier; Huesca, Francisco; Garcia, Norma; Nieva, Rolando [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1998-12-31

A computer tool, developed for the reliability evaluation of the electric energy supply, considering the faults in the generation and transmission systems, is presented. The application of the tool in planning the expansion and operation of the electric systems, the methodology of the solution employed and the various functions it accounts for, are described. At the end some illustrative examples of its applications by means of the studies with a model of representative characteristics of the interconnected national system. [Espanol] Se presenta una herramienta computacional desarrollada para evaluar la confiabilidad del suministro de energia electrica, considerando las fallas en los sistemas de generacion y transmision. Se describen las aplicaciones de la herramienta en la planeacion de la expansion y de la operacion de sistemas electricos, la metodologia de solucion empleada y las diversas funciones con que cuenta. Al final se presentan algunos ejemplos ilustrativos de sus aplicaciones mediante estudios con un modelo de caracteristicas representativas del sistema interconectado nacional.

European Upper Atmosphere Server DIAS - Final Conference/ Abstract

Science.gov (United States)

2007-01-10

PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) INGV - Istituto Nazionale di Geofisica e Vulcanologia (Nat Instit Geophysics, Volcanology) Via di Vigna...organised by the Istituto Nazionale di Geofisica e Vulcanologia (INGV), Rome, Italy. D6.8 Report on the Final Conference - 3 - In general, the DIAS...the Istituto Nazionale di Geofisica e Vulcanologia in Rome focused on the general overview of scientific and technical tools adopted by the DIAS

Weather impact on the electric energy consumption of domestic users; Impacto del clima en el consumo de energia electrica en los usuarios domesticos

Energy Technology Data Exchange (ETDEWEB)

Ramos Niembro, Gaudencio; Fiscal Escalante, Raul [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1998-12-31

It is said that when an energy saving and efficient use of energy program is implemented it must be a business for three: the user, the society and the electric utility. In respect to the user, his decision making is quite simple: is it cheaper or more expensive for me?. Unfortunately in many cases we want a very short return time or the money needed for the initial investment is not available. For instance, and incandescent bulb is several times less expensive than a compact fluorescent lamp, but if we make the calculation on the life-time and on the power consumption reduction of the compact fluorescent lamp, we can conclude that this one is more economic. The benefit for the society can be seen under many different aspects, being the most important the natural resources conservation and the environment. From the stand point of the utility the heavier possible factors are the postponement of the investments and the system reliability. When some of the programs of the Demand Side Management (DSM) are applied, the utilities support or promote non financially profitable but improve their image before the user, on creating a consciousness in the saving and in the efficient use of energy: a short term investment is made and a long term revenue is obtained. For this reason for an optimum selection and implementation the saving and the efficient use of electric energy measures a detailed knowledge of the consumption way is required. In this paper the importance of monitoring the way the different type of users employ the energy in order to make up decisions on DSM programs in many different scenarios: cities, type of users, income level, etc. is shown. [Espanol] Se dice que cuando se implementa un programa de ahorro y uso eficiente de la energia electrica, debe ser negocio para tres: el usuario, la sociedad y la empresa electrica. En lo que respecta al usuario, su toma de decision es muy simple: me resulta mas barato o mas caro. Desafortunadamente en muchos de los casos

Weather impact on the electric energy consumption of domestic users; Impacto del clima en el consumo de energia electrica en los usuarios domesticos

Energy Technology Data Exchange (ETDEWEB)

Ramos Niembro, Gaudencio; Fiscal Escalante, Raul [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1999-12-31

It is said that when an energy saving and efficient use of energy program is implemented it must be a business for three: the user, the society and the electric utility. In respect to the user, his decision making is quite simple: is it cheaper or more expensive for me?. Unfortunately in many cases we want a very short return time or the money needed for the initial investment is not available. For instance, and incandescent bulb is several times less expensive than a compact fluorescent lamp, but if we make the calculation on the life-time and on the power consumption reduction of the compact fluorescent lamp, we can conclude that this one is more economic. The benefit for the society can be seen under many different aspects, being the most important the natural resources conservation and the environment. From the stand point of the utility the heavier possible factors are the postponement of the investments and the system reliability. When some of the programs of the Demand Side Management (DSM) are applied, the utilities support or promote non financially profitable but improve their image before the user, on creating a consciousness in the saving and in the efficient use of energy: a short term investment is made and a long term revenue is obtained. For this reason for an optimum selection and implementation the saving and the efficient use of electric energy measures a detailed knowledge of the consumption way is required. In this paper the importance of monitoring the way the different type of users employ the energy in order to make up decisions on DSM programs in many different scenarios: cities, type of users, income level, etc. is shown. [Espanol] Se dice que cuando se implementa un programa de ahorro y uso eficiente de la energia electrica, debe ser negocio para tres: el usuario, la sociedad y la empresa electrica. En lo que respecta al usuario, su toma de decision es muy simple: me resulta mas barato o mas caro. Desafortunadamente en muchos de los casos

A simple and efficient formula for saving electric energy in lighting systems; Una formula sencilla y eficaz para ahorrar energia electrica en sistemas de iluminacion

Energy Technology Data Exchange (ETDEWEB)

Figueroa Noriega, L. R. [Fideicomiso de Apoyo al Programa de Ahorro de Energia del Sector Electrico, Mexico, D. F. (Mexico)

1995-12-31

In the Metropolitan Area of Mexico City, as well as in other regions with a similar climate, there are an important number of users of the electric energy service, whose main load consists of lighting, since systems such as environmental conditioning, refrigeration, pumping and others are either not necessary or lack of importance as electric energy consumers. These are classified in the range of small users that altogether represent a significant saving, but the precarious diffusion of the technological advances have not contemplated the need of carrying on corrective actions. Among these users are the offices, sites of entertainment and a range of commerces and services such as clothing stores, pharmacies, shoe stores, printing shops, dry cleaner`s, restaurants, barber shops, etc. The present paper pretends to provide a simple methodology easy to carry on, derived form a demonstrative project that FIDE (Fideicomiso de Apoyo al Programa de Ahorro de Energia del Sector Electrico) successfully carried out for the Club Deportivo Berinbau. [Espanol] En el area Metropolitana de la ciudad de Mexico, asi como en otras regiones con clima similar, existe un numero importante de usuarios del servicio de energia electrica cuya carga principal consiste en iluminacion, ya que sistemas como acondicionamiento ambiental, refrigeracion, bombeo y otros, o bien no son necesarios o carecen de la importancia en cuanto a consumo de energia electrica. Estos se catalogan dentro del rango de pequenos usuarios que en conjunto representan un potencial de ahorro significativo pero que, debido a la precaria difusion de los adelantos tecnologicos, no han contemplado la posibilidad de llevar a cabo acciones correctivas. Entre estos usuarios se encuentran oficinas, lugares de esparcimiento, planteles educativos y una gama de comercios y servicios como tiendas de ropa, farmacias, zapaterias, imprentas, tintorerias, restaurantes, peluquerias, etc. El presente trabajo pretende proporcionarles una

A simple and efficient formula for saving electric energy in lighting systems; Una formula sencilla y eficaz para ahorrar energia electrica en sistemas de iluminacion

Energy Technology Data Exchange (ETDEWEB)

Figueroa Noriega, L R [Fideicomiso de Apoyo al Programa de Ahorro de Energia del Sector Electrico, Mexico, D. F. (Mexico)

1996-12-31

In the Metropolitan Area of Mexico City, as well as in other regions with a similar climate, there are an important number of users of the electric energy service, whose main load consists of lighting, since systems such as environmental conditioning, refrigeration, pumping and others are either not necessary or lack of importance as electric energy consumers. These are classified in the range of small users that altogether represent a significant saving, but the precarious diffusion of the technological advances have not contemplated the need of carrying on corrective actions. Among these users are the offices, sites of entertainment and a range of commerces and services such as clothing stores, pharmacies, shoe stores, printing shops, dry cleaner`s, restaurants, barber shops, etc. The present paper pretends to provide a simple methodology easy to carry on, derived form a demonstrative project that FIDE (Fideicomiso de Apoyo al Programa de Ahorro de Energia del Sector Electrico) successfully carried out for the Club Deportivo Berinbau. [Espanol] En el area Metropolitana de la ciudad de Mexico, asi como en otras regiones con clima similar, existe un numero importante de usuarios del servicio de energia electrica cuya carga principal consiste en iluminacion, ya que sistemas como acondicionamiento ambiental, refrigeracion, bombeo y otros, o bien no son necesarios o carecen de la importancia en cuanto a consumo de energia electrica. Estos se catalogan dentro del rango de pequenos usuarios que en conjunto representan un potencial de ahorro significativo pero que, debido a la precaria difusion de los adelantos tecnologicos, no han contemplado la posibilidad de llevar a cabo acciones correctivas. Entre estos usuarios se encuentran oficinas, lugares de esparcimiento, planteles educativos y una gama de comercios y servicios como tiendas de ropa, farmacias, zapaterias, imprentas, tintorerias, restaurantes, peluquerias, etc. El presente trabajo pretende proporcionarles una

Comparative analysis of the indexes of electric power density in buildings lighting systems; Analisis comparativo de los indices de densidad de potencia electrica de los sistemas de alumbrado en edificios

Energy Technology Data Exchange (ETDEWEB)

Cruz Hernandez, J.I.; Morillon Galvez, D. [CONAE, Mexico, D. F. (Mexico)

1995-12-31

The national situation of the lighting systems in buildings is presented in order to know its consumption and make comparisons in accordance with the terms of the Electric Power Density that the lighting systems must satisfy, recently published in the norm, NOM 007 ENER-1995 (Energy Efficiency for non Residential Buildings` Lighting Systems). The form of application of the norm to determine the Electric Power Density Indexes in Lighting Buildings (EPDIL) is described, which permitted to know the current situation of the lighting systems, to compare the results internationally and with the ones specified in the proper norm. As a conclusion, there is the need of enhancing the efficiency of the lightning systems, with savings technologies, improve the lightning levels and equalize the energy indexes of the EPDIL with the ones recommended. [Espanol] Se presenta un estudio sobre la situacion nacional de los sistemas de alumbrado en edificios, con el objeto de conocer su consumo y compararlos, de acuerdo a los terminos de densidad de potencia electrica que deben cumplir los sistemas de alumbrado, publicados recientemente en la norma, NOM 007 ENER-1995 (Eficiencia Energetica para los Sistemas de Alumbrado en Edificios no Residenciales). Se describe la forma de aplicar la norma para determinar los indices de densidad de potencia electrica en alumbrado (DPEA) en edificios, lo cual permitio conocer la situacion actual de los sistemas de alumbrado, comparar con los reportados internacionalmente y con los especificados en la propia norma. Como conclusion se tiene la necesidad de eficientizar los sistemas de alumbrado, con tecnologia ahorradora, mejorar los niveles de iluminacion e igualar los indices energeticos de DPEA con los recomendados.

Comparative analysis of the indexes of electric power density in buildings lighting systems; Analisis comparativo de los indices de densidad de potencia electrica de los sistemas de alumbrado en edificios

Energy Technology Data Exchange (ETDEWEB)

Cruz Hernandez, J I; Morillon Galvez, D [CONAE, Mexico, D. F. (Mexico)

1996-12-31

The national situation of the lighting systems in buildings is presented in order to know its consumption and make comparisons in accordance with the terms of the Electric Power Density that the lighting systems must satisfy, recently published in the norm, NOM 007 ENER-1995 (Energy Efficiency for non Residential Buildings` Lighting Systems). The form of application of the norm to determine the Electric Power Density Indexes in Lighting Buildings (EPDIL) is described, which permitted to know the current situation of the lighting systems, to compare the results internationally and with the ones specified in the proper norm. As a conclusion, there is the need of enhancing the efficiency of the lightning systems, with savings technologies, improve the lightning levels and equalize the energy indexes of the EPDIL with the ones recommended. [Espanol] Se presenta un estudio sobre la situacion nacional de los sistemas de alumbrado en edificios, con el objeto de conocer su consumo y compararlos, de acuerdo a los terminos de densidad de potencia electrica que deben cumplir los sistemas de alumbrado, publicados recientemente en la norma, NOM 007 ENER-1995 (Eficiencia Energetica para los Sistemas de Alumbrado en Edificios no Residenciales). Se describe la forma de aplicar la norma para determinar los indices de densidad de potencia electrica en alumbrado (DPEA) en edificios, lo cual permitio conocer la situacion actual de los sistemas de alumbrado, comparar con los reportados internacionalmente y con los especificados en la propia norma. Como conclusion se tiene la necesidad de eficientizar los sistemas de alumbrado, con tecnologia ahorradora, mejorar los niveles de iluminacion e igualar los indices energeticos de DPEA con los recomendados.

The distribution of the electric energy consumed in the World Trade Center building; La distribucion de la energia electrica consumida en el edificio World Trade Center

Energy Technology Data Exchange (ETDEWEB)

Gaona de la Fuente, Alvaro; Carrillo Borja, Angel [Luz y Fuerza del Centro, Mexico, D. F. (Mexico)

1997-12-31

This document describes the distribution of the electric energy in the World Trade Center building. Also called the Business International Capital, it is a modern international concept that integrates under the same roof services and supports required by the foreign commerce, with a great 50 stories high building, information network, a business center, a commercial center, an international center for exhibits and conventions and a luxury hotel. It is a modern building equipped with a numberless technological advancements an a total installed electrical load of 35000 kVA. The distribution structures utilized for high buildings are described, the structure that was decided to adopt in the World Trade Center, the requirement for the execution of the distribution electric work, the Luz y Fuerza installations in the buildings conglomerate, the operation and maintenance of the distribution network of this building and the basic needs for new installations of this type of buildings [Espanol] En el presente documento se describe la distribucion de la energia electrica del edificio World Trade Center de la ciudad de Mexico. Llamado tambien la capital internacional de los negocios es un moderno concepto internacional que integra bajo un mismo techo servicios y apoyos que se requieren para el comercio exterior contando con una gran torre de 50 pisos, red de informacion, un centro de negocios, un centro comercial, un centro internacional de exposiciones y convenciones y un hotel de lujo. Es un edificio moderno equipado con un sinnumero de adelantos tecnologicos y con una carga total instalada de 35000 kVA. Se describen las estructuras de distribucion utilizadas en edificios altos, la estructura que se decidio implantar en el World Trade Center, los requerimientos para la ejecucion de la obra electrica de distribucion, las instalaciones de Luz y Fuerza en el conjunto de dicho edificio, la operacion y mantenimiento de la red de distribucion de este edificio, y las necesidades

The satisfaction of developing a project of electrical energy saving; La satisfaccion de desarrollar un proyecto de ahorro de energia electrica

Energy Technology Data Exchange (ETDEWEB)

Arreola Suarez, Alejandro [Hotel Club Marival, Nuevo Vallarta, Nayarit (Mexico)

2002-09-01

The projects for the energy saving in hotels represent a great opportunity to reduce the operation costs in the demand and consumption of electrical energy, since the existing facilities can take advantage of new technologies in illumination, air conditioning, refrigeration and heating. By their constitution, the hotels work the year around uninterruptedly and must provide all type of services to the guests and working personnel, which originates that they consume great amounts of energy in air conditioning, lightning, laundry, etc., since the prestige of the installation depends on it. [Spanish] Los proyectos para el ahorro de energia en hoteles representan una gran oportunidad para reducir costos de operacion en la demanda y consumo de energia electrica, ya que las instalaciones existentes pueden aprovechar nuevas tecnologias en iluminacion, aire acondicionado, refrigeracion y calefaccion. Por su constitucion, los hoteles trabajan ininterrumpidamente todo el ano y deben proporcionar toda clase de servicios a los huespedes y personal que labora, lo cual origina que consuman grandes cantidades de energia en aire acondicionado, iluminacion, lavanderia, etc., pues de ello depende el prestigio de la instalacion.

Estudo do solo-cimento-autoadensável produzido com solos da região do Porto-PT. PARTE II: avaliação da resistência e desempenho mecânico por meio da medição da resistividade elétrica e velocidade de propagação de ondas de ultrassom.

Directory of Open Access Journals (Sweden)

Marco Antônio Morais Alcantara

2014-09-01

Full Text Available (D.O.I.: 10.5216/reec.V9i1.29946 RESUMO: O artigo apresenta um estudo do solo-cimento autoadensável, sobre utilização da medição das propriedades relativas à resistividade elétrica e da velocidade de propagação de ondas de ultrassom, como meios de se buscar subsídios para esclarecer o processo de estabilização, bem como de se encontrar um meio indireto para a estimativa do valor da resistência e do desempenho mecânico. Para tanto, foi realizado um experimento a partir da utilização de um solo residual da região do Porto-Pt, cimento Portland, água, e aditivo de atuação estérica e eletrostática. A proporção dos materiais foi adotada a partir do peso seco do solo, conforme teores que variaram de 20, 25, e 30% de cimento, 41, 44 e 47% para a água, e 0,66, 0,80 e 0,93% para a variação do teor do superplastificante. Os ensaios no realizados no estado fresco procuraram seguir os protocolos de avaliação utilizados para os casos de argamassas e de concretos autoadensáveis; e, no estado endurecido, foram realizados os ensaios de resistência à compressão simples, resistência à flexão, e a avaliação dos valores da resistividade elétrica e da velocidade da propagação de ondas ultrassom. Os resultados indicaram haver aproximação entre o solo-cimento-auto-adensável e os concretos e argamassas; bem como, a variação dos valores da resistividade elétrica e da velocidade de propagação de ondas de ultrassom se apresentaram coerentes com a idade de cura e com os valores de resistência mecânica alcançados. ABSTRACT: The article presents a study of the soil-cement self-compacting, on the feasibility of using the measurement of the properties on the electrical resistivity and the speed of propagation of ultrasound waves as a means of seeking information to clarify the stabilization process as well as to find an indirect means for estimating the value of resistance and mechanical performance. Therefore, an experiment

Integration of a visual tracking system into a four probe measuring system to evaluate the electrical sheet resistance of thin films

OpenAIRE

Curi Grados, Osmar Giordano Adolfo

2017-01-01

En los últimos años, las películas delgadas han sido ampliamente estudiadas debido a la amplia gama de aplicaciones técnicas que presentan, algunas de las cuales están determinadas por sus propiedades eléctricas tales como la resistividad. Generalmente, algunas propiedades medidas en la macroescala no siguen siendo válidas cuando el material es reducido a la nanoescala. Varios estudios demuestran que la resistividad en películas delgadas depende del espesor de la muestra. Por l...

Application of unimodal optic fiber to communications among electric substations; Aplicacion de fibra optica unimodal a comunicaciones entre subestaciones electricas

Energy Technology Data Exchange (ETDEWEB)

Martinez Pinon, Fernando; Hernandez Juarez, Taide [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1992-07-01

The utilization of the unimodal fiber optics technology in the electric power systems, represents one of the best communication options because of its multiple advantages, that results in a better coordination of the technical and administrative activities, needed to carry the electric energy from its generation site to the most remote locations. In this document a study, in accordance with the available options for the design of communication systems via unimodal optic fiber, is presented. With this technology, ties of more than 100 kilometers without the need of repeating stations, can be made. [Espanol] La utilizacion de la tecnologia de fibra optica unimodal en los sistemas electricos de potencia representa una de las mejores alternativas de comunicacion por sus multiples ventajas que se traducen en una mejor coordinacion de las acitividades tecnicas y administrativas necesarias para llevar la energia electrica desde el lugar de generacion hasta los puntos mas distantes. En este documento se presenta un estudio de acuerdo a las opciones disponibles para el diseno de sistemas de comunicacion por fibra optica unimodal. Con esta tecnologia se pueden realizar enlaces mayores que 100 km sin necesidad de repetidores.

Circulation in the Southeastern Mediterranean Sea (EGITTO-NICOP)

Science.gov (United States)

2007-09-30

Circulation in the Southeastern Mediterranean Sea (EGITTO-NICOP) Pierre-Marie Poulain Istituto Nazionale di Oceanografia e di Geofisica ...Nazionale di Oceanografia e di Geofisica Sperimentale,Borgo Grotta Gigante, 42/c,34010 Sgonico (Trieste), Italy, , 8. PERFORMING ORGANIZATION REPORT NUMBER

Near-Surface Dispersion and Circulation in the Marmara Sea (MARMARA)

Science.gov (United States)

2010-01-01

MARMARA) Pierre-Marie Poulain Istituto Nazionale di Oceanografia e di Geofisica Sperimentale Borgo Grotta Gigante, 42/c 34010 Sgonico...S) AND ADDRESS(ES) Istituto Nazionale di Oceanografia e di Geofisica Sperimentale,Borgo Grotta Gigante, 42/c,34010 Sgonico (Trieste), Italy, 8

Surface Circulation in the Northeastern Mediterranean (NEMED)

Science.gov (United States)

2011-09-30

NEMED) Pierre-Marie Poulain Istituto Nazionale di Oceanografia e di Geofisica Sperimentale Borgo Grotta Gigante, 42/c 34010 Sgonico (Trieste...Istituto Nazionale di Oceanografia e di Geofisica Sperimentale,Borgo Grotta Gigante, 42/c,34010 Sgonico (Trieste), Italy, 8. PERFORMING ORGANIZATION

Analysis and design of a dish/Stirling system for solar electric generation with a 2.7 kW air-cooled engine; Analisis y diseno de un sistema de generacion electrica termosolar con concentrador de disco parabolico y motor Stirling de 2.7 kW enfriado por aire

Energy Technology Data Exchange (ETDEWEB)

Beltran-Chacon, R.; Velazquez-Limon, N. [Universidad Autonoma de Baja California, Baja California (Mexico)]. E-mails: rbeltran1@uabc.edu.mx; nicolas.velazquez@uabc.edu.mx; Sauceda-Carvajal, D. [Universidad Politecnica de Baja California, Baja California (Mexico)]. E-mail: dsaucedac@upbc.edu.mx

2012-01-15

This paper presents a mathematical modeling, simulation and design of a solar power system of a parabolic dish with an air-cooled Stirling engine of 2.7 kW. The model used for the solar concentrator, the cavity and the Stirling engine were successfully validated against experimental data. Based on a parametric study, the design of the components of the engine is carried out. The study shows that as system capacity increases, the overall efficiency is limited by the power required by the fan, since the design of the cooler needs greater amounts of heat removal by increasing the air flow without affecting the internal conditions of the process (mass flow of working gas and internal dimensions of the same). The system was optimized and achieves an overall efficiency of solar to electric energy conversion of 26.7%. This study shows that the use of an air-cooled Stirling engine is potentially attractive for power generation at low capacities. [Spanish] Este trabajo presenta un modelado matematico, la simulacion y diseno de un sistema de generacion electrica termosolar de disco parabolico con motor Stirling de 2.7 kW enfriado directamente por aire. El modelo utilizado para el concentrador, la cavidad y el motor Stirling, fueron validados satisfactoriamente con datos experimentales. Con base en un estudio parametrico se realizo el dimensionamiento de los componentes del motor. El estudio realizado muestra que conforme se incrementa la capacidad del sistema, la eficiencia global se ve limitada por la potencia requerida por el ventilador, dado que el diseno del enfriador necesita retirar mayores cantidades de calor aumentando el flujo de aire, sin afectar las condiciones internas del proceso (flujo masico del gas de trabajo y dimensiones internas del mismo). El sistema fue optimizado obteniendo una eficiencia global de conversion de energia solar a electrica de 26.7%. Este estudio muestra que el uso de un motor Stirling enfriado directamente por aire es potencialmente

Educational software tool for protection system engineers: distance relay; Herramienta educativa para la formacion de ingenieros en protecciones electricas: relevador de distancia

Energy Technology Data Exchange (ETDEWEB)

Trujillo-Guajardo, L.A.; Conde-Enriquez, A. [Universidad Autonoma de Nuevo Leon, Nuevo Leon (Mexico)]. E-mail: luistrujillo84@gmail.com; con_de@yahoo.com

2012-04-15

In this article, a graphical software tool is presented; this tool is based on the education of protection system engineers. The theoretical fundaments used for the design of operation characteristics of distance relays and their algorithms are presented. The software allows the evaluation and analysis of real time events or simulated ones of every stage of design of the distance relay. Some example cases are presented to illustrate the activities that could be done with the graphical software tool developed. [Spanish] En este articulo se presenta una herramienta computacional grafica para apoyar la formacion de ingenieros en protecciones electricas. Los fundamentos teoricos para el diseno de caracteristicas de operacion de relevadores de distancia, asi como las rutinas de programacion de un relevador de distancia son presentados. La herramienta desarrollada permite la evaluacion de las etapas de diseno de relevadores y el analisis de la operacion ante eventos reales o simulados. Se presentan algunos casos de ejemplo para ilustrar las actividades didacticas que son posibles de realizar con la herramienta presentada.

Geoeléctrica aplicada a la detección de glifosato en el suelo

OpenAIRE

Lemeillet, F. A.; Losinno, B.N.

2017-01-01

Dada la creciente aplicación de glifosato, herbicida utilizado para controlar malezas, y la posibilidad de que en la pulverización las gotas se depositen también en el suelo, resulta importante poder evaluar su presencia. En este trabajo se propuso establecer si la tomografía de resistividad eléctrica (TRE) es sensible a la presencia de dicho agroquímico. Se espera detectar variaciones de la resistividad eléctrica (ρ) en el suelo, debido la presencia de sustancias contaminantes. Se llevaro...

Coastal Ocean Circulation Experiment off Senegal (COCES)

Science.gov (United States)

2011-09-30

Pierre-Marie Poulain Istituto Nazionale di Oceanografia e di Geofisica Sperimentale Borgo Grotta Gigante, 42/c 34010 Sgonico (Trieste), Italy...ORGANIZATION NAME(S) AND ADDRESS(ES) Istituto Nazionale di Oceanografia e di Geofisica Sperimentale,Borgo Grotta Gigante, 42/c,34010 Sgonico (Trieste

Electric power conservation while using pumping systems; Conservacion de Energia Electrica en Sistemas de Bombeo

Energy Technology Data Exchange (ETDEWEB)

Nambiar, P

2007-01-15

The pumping systems provide about 20 to 25 percent of energy which is necessary worldwide: it is fruitful to understand how to use electric power efficiently, to achieve the reduction regarding expenses a pumping system implies.It is essential to possess a better knowledge about the pumping system and its applications, in order to be able to use energy responsibly. If people do not how to operate this kind of systems properly, they will use inadequate equipment that will cause an energy waste. In addition it is important to know: alternative methods to meet variable demands, an adapted system to pump water requirements in order to ensure the pump work in its pumping point, and the life cycle system cost for the energy saving in the long term. [Spanish] En promedio del 20 al 25% de la energia necesaria en el mundo proviene de los sistemas de bombeo, por tal razon es importante saber como utilizar la energia electrica con eficiencia para asi lograr reducir los gastos que este tipo de sistemas implican. Para poder hacer un buen uso de la energia, es necesario que se tenga un conocimiento mayor del sistema de bombeo y aplicacion, ya que la ignorancia sobre esto exige el uso de aparatos que contribuyen al desperdicio de la energia; por otro lado tambien es esencial conocer metodos alternos para demandas variables, tener un sistema que se adapte a las necesidades de bombeo del agua para asegurarse de que cada bomba trabaje cerca de su punto de bombeo y finalmente conocer el costo del ciclo de vida del sistema para el ahorro de energia a largo plazo.

Supervisory fussy control for an electric generating hybrid system; Control supervisorio difuso para un sistema hibrido de generacion electrica

Energy Technology Data Exchange (ETDEWEB)

Lagunas Mendoza, Javier

2004-11-15

the fuzzy supervisory controller were compared with a conventional controller. The results shows that the supervisory controller fulfills the three main objectives of the system operation: I) to reduce the fuel consumption of the back-up system, II) to reduce the depth of the discharge of the battery bank, and III) to keep fully charged the battery bank as much as possible in order to make a better use of the available free renewable energy sources. [Spanish] En este trabajo se presenta el desarrollo de un controlador supervisorio difuso para un sistema hibrido de generacion electrica (SHGE). En este trabajo se definio la configuracion y los elementos que componen el SHGE a utilizar, producto de la revision de configuraciones de sistemas hibridos propuestas actualmente. La configuracion del SHGE incluye: arreglos fotovoltaicos y aerogeneradores como fuentes de generacion renovable, una maquina de combustion interna como sistema de respaldo, un banco de baterias como medio de almacenamiento de energia, cargas electricas en corriente alterna y un inversor CD/CA para poder alimentarlas. Tambien a partir de la configuracion propuesta se buscaron y seleccionaron los modelos matematicos de los diferentes elementos del sistema. Se llevo a cabo la validacion de los modelos a traves de la comparacion de la salida contra datos reales obtenidos en un SHGE instalado en Pachuca. Con los modelos se llevo a cabo el desarrollo de un programa de simulacion para un SHGE en Matlab. Se determino la funcion principal del controlador supervisorio dentro del SHGE. La funcion es satisfacer el o los objetivos de operacion del sistema. La filosofia de operacion del controlador supervisorio se definio a partir de la configuracion electrica propuesta y de los objetivos de operacion del sistema. Por lo que respecta al desarrollo del controlador supervisorio, se llevo a cabo una revision de los controladores supervisorios actuales que utilizan alguna tecnica de control inteligente. A partir de

The Mexican electric industry under an opening triangle; La industria electrica mexicana bajo un triangulo de apertura

Energy Technology Data Exchange (ETDEWEB)

Suarez Guevara, Sergio [Instituto de Investigaciones Economicas, Universidad Nacional Autonoma de Mexico (UNAM), Mexico, D. F. (Mexico)

1997-12-31

This document analyzes the electric industry in Mexico in its opening phase, which must be qualified as a strategic activity within the present and future becoming of the Mexican economy. The Mexican electric sector was framed within the National Project born out in the country`s Politic Constitution; where the State economic intervention is driven and induced, with its exclusive duty in strategic activities through public enterprises created for that purpose and as a support of Mexico`s economic and social welfare. Within the opening it should be pointed out the participation of the North American Free Trade Agreement (NAFTA), the Energy Program, the Development Program and Restructure of the Energy Sector 1995-2000 [Espanol] En el presente documento se analiza la industria electrica en Mexico en su fase de apertura, la cual debe calificarse como una actividad estrategica dentro del devenir presente y futuro de la economia mexicana. El sector electrico mexicano se enmarco dentro del Proyecto Nacional que nace en la Constitucion Politica del pais; donde se impulsa e induce la intervencion economica del Estado, con su quehacer exclusivo en actividades estrategicas, por medio de empresas publicas creadas para tal fin y en apoyo del bienestar economico y social de Mexico. Dentro de la apertura hay que senalar la participacion que tiene el Tratado de Libre Comercio, el Programa de Energia y el Programa de Desarrollo y Reestructuracion del Sector Energia 1995-2000

Environmental Assessment for Selected Regions in the Mediterranean Sea

Science.gov (United States)

1992-01-01

7-23. Finetti, I. and C. Morelli (1972). Wide scale digital seismic exploration of the Mediterranean Sea. Bollettino Di Geofisica Teorica Applicata 14...291-342. Finetti, I. and C. Morelli (1973). Geophysical exploration of the Mediterranean. Bollettino Di Geofisica Teorica Applicata 15: 263-341

Procedures to enter the international market of the carbon and PEMEX electrical generation projects; Procedimientos para ingresar al mercado internacional del carbono y proyectos de generacion electrica de PEMEX

Energy Technology Data Exchange (ETDEWEB)

Zeferino Abundis, Yolanda [Universidad Nacional Autonoma de Mexico (UNAM), Mexico, D.F. (Mexico)

2006-11-15

The consumption and production of the electrical energy contribute to the gas emission that has the property of retaining heat in the atmosphere, giving rise to an increment in the global average temperature of the Earth, and causing a climatic change that the international scientific consensus describes as important alterations in the meteorological patterns. As a result of this, international actions were taken. The most ambitious agreement and by its quantified and obligatory character is presented the Kyoto Protocol, that forces the countries listed in Annex 1 to reduce their emissions through national measures and flexible mechanisms, within these last ones is the Clean Development Mechanism (CDM) that contemplates the mutual cooperation between developed and developing countries in the participation of projects tending to the reduction of gas emissions of greenhouse effect. Petroleos Mexicanos (PEMEX) has large necessities of electrical energy and steam, and counts on projects with characteristics that under the CDM cover the characteristics to be technical and economically viable. [Spanish] El consumo y produccion de la energia electrica contribuye a la emision de gases que tienen la propiedad de retener calor en la atmosfera, dando lugar a un incremento en la temperatura promedio global de la Tierra, y provocando un cambio climatico que el consenso cientifico internacional describe como alteraciones importantes en los patrones meteorologicos. A raiz de esto, se tomaron acciones internacionales. El acuerdo mas ambicioso y por su caracter cuantificado y obligatorio lo representa el Protocolo de Kyoto, quien obliga a los paises listados en el Anexo 1 a reducir sus emisiones a traves de medidas nacionales y mecanismos flexibles, dentro de estos ultimos se encuentra el Mecanismo de Desarrollo Limpio (MDL) que contempla la cooperacion mutua entre paises desarrollados y en vias de desarrollo en la participacion de proyectos tendientes a la reduccion de emisiones

Super-Ensemble Techniques: Application to Surface Drift Prediction During the DART06 and MREA07 Campaigns

Science.gov (United States)

2009-10-08

Belgium b/sfiruro Nazionale di Oceanografia e di Geofisica sperimentaie (OCS), Trieste, Italy ’Service Hydrographique et Oceanographique de la Marine...13 me dv Chateltier. 29200 Brest, France d Istituto Nazionale di Geofisica e Vulcanologia. Bologna, Italy ’ Palazzo A.M., Viale dellVniversita’ 4

Fractal analysis of the electrical discharges' surface paths in polymeric insulation considering different pollution levels; Analisis fractal de las trayectorias de descargas electricas superficiales en aislamiento polimerico considerando diferentes niveles de contaminacion

Energy Technology Data Exchange (ETDEWEB)

Palacios Lopez, Arturo

2002-07-01

In this thesis tree patterns of superficial breakdown in polymeric insulator of Silicon Rubber are generated. Experimental arrangement rod-rod was used on the basis of norm ASTM D 2303-85. Pollution levels on the basis of norm IEC 507 were also used. The experimental values of Fractal Dimension for each case of pollution were reported. A self similar method called Box Counting for the fractal dimension calculus and for the self affine methods an R/S and Variogram were used. According to the results, it was concluded that the tree patterns of superficial electric breakdown in Silicon Rubber is self similar and its value does not depend on the degree of pollution, that is equivalent to the concentration of salt for liter of water or to the Equivalent Salt Deposition (ESDD), in the surface of an insulator. [Spanish] En el presente trabajo se inducen descargas electricas superficiales en un aislamiento polimerico de Hule Silicon, el arreglo experimental que se utilice es punta-punta con base en la norma ASTM D 2303-85 y los niveles de contaminacion con base en la norma IEC 507. Se reportan los valores experimentales de la Dimension Fractal para cada caso de contaminacion, se utilice el metodo auto similar de conteo de cuadros, para el calculo de la Dimension Fractal y para metodos auto afines se utilice analisis R/S y variograma. Con los resultados obtenidos se concluye que la trayectoria de la descarga electrica superficial en un polimero de Hule Silicon es auto similar y su valor no depende del grado de contaminacion, el cual es equivalente a la concentracion de gramos de sal por litro de agua o a la densidad de sal depositada (DESD), en la superficie de un aislador.

Comparison of two methods for locating single phase faults considering the ground resistivity

OpenAIRE

Mora Flórez, Juan José; García Osorio, Germán Darío; Pérez Londoño, Sandra Milena; Grupo de Investigación en Calidad de Energía Eléctrica y Estabilidad - ICE3

2008-01-01

Este artículo presenta la comparación de dos métodos de localización de fallas, considerando la resistividad del terreno y la resistencia de falla. Los métodos son el propuesto por un fabricante de software comercial y un método clásico basado en la estimación de la impedancia. Las pruebas consideran tres modelos de resistividad, a partir de medidas tomadas en campo. Los resultados en un sistema de 34.5 kV, muestran un mejor desempeño del método basado en la impedancia. Adicionalmente, lo...

Model-Based Directed Drifter Launches in the Adriatic Sea: Results from the DART Experiment

Science.gov (United States)

2007-05-23

Nazionale di Oceanografia e Geofisica Sperimentale, Trieste, Copyright 2007 by the American Geophysical Union. Italy. 0094-8276/07/2007GL029634S05.00...Oceanografia c di rate short-time prediction of the observations. Geofisica Sperimentale, Borgo Grotta Gigante, 42/c, 1-34010 Trieste, Italy. J. W. Book and P

Smooth Particle Hydrodynamics for Surf Zone Waves

Science.gov (United States)

2009-01-01

2010.) The GPU-SPHysics code, initiated by Dr. Alexis Hérault at the Istituto Nazionale di Geofisica e Vulcanologia in Sicily, has been applied to... Geofisica e Vulcanologia, sezione di Catania, for the development of GPU-SPHysics. Drs. Hérault and Bilotta were in residence at JHU during January of

Natural ionizing system to electrical protection and energy; Sistema ionizante natural de proteccion electrica y energias

Energy Technology Data Exchange (ETDEWEB)

Cabareda Fermin; Luis [Universidad de Los Andes (Venezuela)]. E-mail: lcabaredaf@gmail.com

2013-03-15

This is the new highest technology, 100% Venezuelan and unique in the world, technological innovation, world patent for maximum protection, security and zero risk (0) to all electrical and power generation systems: hydroelectric and thermoelectric power plants, wind, nuclear and solar power plants, etc; it's the only technology around the world that has the potential to disperse and propagate to land mass the enormous energies associated to the atmospheric discharges (lightning), which are in the order: 200,000 to 500,000 Amperes; 1,000 million Kilowatts and high-level transient voltage of 100 million Volts. This new high technology is the solution to the paradigm of Benjamin Franklin and it is the mechanism to end blackouts that produce so many damages and losses of billions of dollars to both generators and users of electrical service, throughout the world. [Spanish] Esta nueva mas alta tecnologia, 100% venezolana y unica en el mundo, innovacion tecnologica, patente mundial ofrece maxima proteccion, seguridad y riesgo cero (0) a todos los sistemas de generacion electrica: centrales hidroelectricas, termoelectricas, de viento, nucleares y solar, otros; es la unica tecnologia en el mundo que tiene el potencial para dispersar y propagar a la masa terrestre las enormes energias asociadas a las descargas atmosfericas (rayos) que estan en el orden de: 200.000 a 500.000 amperios, 1.000 millones de kilovatios y voltajes transitorios de alto nivel de 100 millones de voltios. Esta nueva alta tecnologia es la solucion al paradigma de Benjamin Franklin y es el mecanismo para eliminar apagones que producen danos y perdidas de billones de dolares para ambos: generados y usuarios del servicio electrico, alrededor del mundo.

Homogeneous grouping of residential users of electric power in accordance with the variables that affect the consumption; Agrupamientos homogeneos de usuarios residenciales de energia electrica en funcion de las variables que impactan el consumo

Energy Technology Data Exchange (ETDEWEB)

Campero Littlewood, E.; Romero Cortes, J. [Departamento de Energia, Universidad Autonoma Metropolitana - Unidad Azcapotzalco, Mexico, D. F. (Mexico)

1997-12-31

This paper presents the results of the correlation analysis of the monthly consumption of electric power and the capacities in watts of the electric household appliances and domestic lighting performed in a sample of users of the residential tariff. To carry out this task, the information obtained in the answers to the inquiry applied to a group of dwellings, was used (the results of the inquiry are presented in another paper of this Seminar). The correlation variables were obtained from the nominal capacities or through the actual measurements of the energy consumption of the electric household appliances similar to the ones found in the visited homes. At the end of this paper the result of the application of the cluster analysis technic to obtain homogeneous groups of users, is presented, so as to be in position of estimating the shape of the hourly demand curve by means of the recording of the demand (watts) of a small sample of users. [Espanol] En este articulo se presenta el resultado de correlacion del consumo mensual de energia electrica y las capacidades en watts de los electrodomesticos e iluminacion realizado a una muestra de usuarios de tarifa residencial. Para este trabajo se utilizo la informacion obtenida en las respuestas de una encuesta aplicada en un conjunto habitacional (los resultados de la encuesta se presentan en otro articulo en este Seminario). Las variables de la correlacion se obtuvieron a partir de las especificaciones de capacidades o a traves de mediciones en electrodomesticos similares a los encontrados en los hogares. Al final se presenta el resultado de la aplicacion de la tecnica de formacion de agrupamientos `Cluster Analysis` para obtener grupos homogeneos de usuarios, de forma que se pueda estimar el perfil de demanda electrica mediante el registro de la demanda (watts) de una pequena muestra de usuarios.

Homogeneous grouping of residential users of electric power in accordance with the variables that affect the consumption; Agrupamientos homogeneos de usuarios residenciales de energia electrica en funcion de las variables que impactan el consumo

Energy Technology Data Exchange (ETDEWEB)

Campero Littlewood, E; Romero Cortes, J [Departamento de Energia, Universidad Autonoma Metropolitana - Unidad Azcapotzalco, Mexico, D. F. (Mexico)

1998-12-31

This paper presents the results of the correlation analysis of the monthly consumption of electric power and the capacities in watts of the electric household appliances and domestic lighting performed in a sample of users of the residential tariff. To carry out this task, the information obtained in the answers to the inquiry applied to a group of dwellings, was used (the results of the inquiry are presented in another paper of this Seminar). The correlation variables were obtained from the nominal capacities or through the actual measurements of the energy consumption of the electric household appliances similar to the ones found in the visited homes. At the end of this paper the result of the application of the cluster analysis technic to obtain homogeneous groups of users, is presented, so as to be in position of estimating the shape of the hourly demand curve by means of the recording of the demand (watts) of a small sample of users. [Espanol] En este articulo se presenta el resultado de correlacion del consumo mensual de energia electrica y las capacidades en watts de los electrodomesticos e iluminacion realizado a una muestra de usuarios de tarifa residencial. Para este trabajo se utilizo la informacion obtenida en las respuestas de una encuesta aplicada en un conjunto habitacional (los resultados de la encuesta se presentan en otro articulo en este Seminario). Las variables de la correlacion se obtuvieron a partir de las especificaciones de capacidades o a traves de mediciones en electrodomesticos similares a los encontrados en los hogares. Al final se presenta el resultado de la aplicacion de la tecnica de formacion de agrupamientos `Cluster Analysis` para obtener grupos homogeneos de usuarios, de forma que se pueda estimar el perfil de demanda electrica mediante el registro de la demanda (watts) de una pequena muestra de usuarios.

Development and implementation of a pilot network for continuous monitoring of electric energy; Desarrollo e implantacion de una red piloto de monitoreo continuo de energia electrica

Energy Technology Data Exchange (ETDEWEB)

Sanchez Cifuentes, A.; Cortes Eslava, A. [Facultad de Ingenieria, UNAM, Mexico, D. F. (Mexico)

1997-12-31

The ``Programa Universitario de Energia (PUE)`` (University Energy Program) of the Universidad Nacional Autonoma de Mexico (UNAM) through the project ``Ecologic Control of The University Campus`` has the objective of instrumenting policies for the rational use of the electric energy in the UNAM installations. The PUE has performed a series of activities aimed at the establishment of an integral program for the electric energy management in the UNAM. This program has to consider the measures for energy saving (MES) of general kind and to promote a series of specific measures to be adequated and implemented for each one of the departments. The success in establishing a series of MES compels to quantify its effects, to register and to analyze them to be in position of enhancing them, since it must be kept in mind that something that can not be measured can not be improved. For this purpose the PUE is developing a continuous monitoring pilot network of electric energy with local and remote access and an automated metering system. Two monitoring schemes are experimented, one commercial metering equipment and another one with own metering technology. In this paper the characteristics of the proposed monitoring schemes are described. [Espanol] El Programa Universitario de Energia (PUE) de la Universidad Nacional Autonoma de Mexico (UNAM), a traves del proyecto {sup C}ontrol Ecologico del Campus Universitario{sup ,} tiene como objetivo instrumentar politicas de uso racional de la energia en las instalaciones universitarias. El PUE ha realizado una serie de actividades encaminadas a establecer un programa integral de administracion de la energia electrica en la UNAM. El programa mencionado debe considerar medidas de ahorro de energia (MAE) de tipo general y promover una serie de medidas particulares, para ser adecuadas e implantadas por cada una de las dependencias. El exito en el establecimiento de una serie de MAE, obliga a cuantificar sus efectos, registrarse y

Development and implementation of a pilot network for continuous monitoring of electric energy; Desarrollo e implantacion de una red piloto de monitoreo continuo de energia electrica

Energy Technology Data Exchange (ETDEWEB)

Sanchez Cifuentes, A; Cortes Eslava, A [Facultad de Ingenieria, UNAM, Mexico, D. F. (Mexico)

1998-12-31

The ``Programa Universitario de Energia (PUE)`` (University Energy Program) of the Universidad Nacional Autonoma de Mexico (UNAM) through the project ``Ecologic Control of The University Campus`` has the objective of instrumenting policies for the rational use of the electric energy in the UNAM installations. The PUE has performed a series of activities aimed at the establishment of an integral program for the electric energy management in the UNAM. This program has to consider the measures for energy saving (MES) of general kind and to promote a series of specific measures to be adequated and implemented for each one of the departments. The success in establishing a series of MES compels to quantify its effects, to register and to analyze them to be in position of enhancing them, since it must be kept in mind that something that can not be measured can not be improved. For this purpose the PUE is developing a continuous monitoring pilot network of electric energy with local and remote access and an automated metering system. Two monitoring schemes are experimented, one commercial metering equipment and another one with own metering technology. In this paper the characteristics of the proposed monitoring schemes are described. [Espanol] El Programa Universitario de Energia (PUE) de la Universidad Nacional Autonoma de Mexico (UNAM), a traves del proyecto {sup C}ontrol Ecologico del Campus Universitario{sup ,} tiene como objetivo instrumentar politicas de uso racional de la energia en las instalaciones universitarias. El PUE ha realizado una serie de actividades encaminadas a establecer un programa integral de administracion de la energia electrica en la UNAM. El programa mencionado debe considerar medidas de ahorro de energia (MAE) de tipo general y promover una serie de medidas particulares, para ser adecuadas e implantadas por cada una de las dependencias. El exito en el establecimiento de una serie de MAE, obliga a cuantificar sus efectos, registrarse y

Electrochemical generation of energy: from the portable electronic devices to industrial plants; Generacion electroquimica de energia electrica: de los dispositivos electronicos portatiles a las plantas industriales

Energy Technology Data Exchange (ETDEWEB)

Rodriguez Varela, Javier [Centro de Investigacion y de Estudios Avanzados (CINVESTAV), Unidad Saltillo (Mexico)

2006-10-15

This article proposes the electrical energy generation via electrochemistry as substitute of petroleum and discusses on the development of low and high temperature fuel cells fed by diverse types of fuels: electrolyte fuel cells of polymeric membrane, PEM cells H{sub 2}/O{sub 2}, cell of direct alcohol consumption, PEM cells and bio-fuel cells, SOFC cells and bio-fuel cells. It presents its constitution, operation principles, and use plausibility, present situation in the market, advantages and disadvantages, as well as already made cell insertion projects. [Spanish] Este trabajo propone la generacion de energia electrica via electroquimica como sustituto del petroleo y discurre sobre el desarrollo de celdas de combustible de baja y alta temperatura alimentadas por diversos tipos de combustibles: celdas de combustible de electrolito de membrana polimerica, celda PEM H{sub 2}/O{sub 2}, celda de consumo directo de alcohol, celdas PEM y biocombustibles, celdas de combustible de oxido solido y biocombustibles. Expone su constitucion, principios de operacion, plausibilidad de uso, situacion actual en el mercado, ventajas y desventajas, asi como proyectos de insercion de celdas ya realizados.

Research activities in the use of energy; Actividades de investigacion en el uso de la energia electrica

Energy Technology Data Exchange (ETDEWEB)

Covarrubias Ramos, Rogelio; Garcia Juarez, Francisco [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1999-12-31

The use of energy is intimately related to the development and is found in the human activities of all types, consequently we could say that to a greater usage it must correspond a greater benefit. This paper carries on a comparative analysis of the Mexico`s energy efficiency versus industrialized countries; this analysis shows that while Mexico indicates a growing tendency, in the industrialized countries the tendency is to the drop, unmistakable sign of a better usage of the energy sources. It also makes evident that promoting the energy efficiency in Mexico will stimulate and regulate the energy conservation at National level, in the same way it is mentioned that an appropriate energy demand Management for the users as well as for the service providers, will diminish the peak demand, the adequate application of the electric rates at the actual conditions and the energy saving and the strategic load growth [Espanol] El uso de la energia esta intimamente relacionado con el desarrollo y se encuentra en las actividades humanas de todo tipo, de tal suerte que podriamos decir que a mayor uso debe corresponder un mayor beneficio. En este documento se realiza un analisis comparativo de la eficiencia energetica en Mexico contra paises industrializados; este analisis muestra que mientras Mexico indica una tendencia creciente, en los paises industrializados la tendencia es a la baja, signo inequivoco de un mejor uso de los energeticos, tambien hace ver que la promocion de la eficiencia energetica en Mexico estimulara y regulara el ahorro de energia a nivel nacional, de igual manera se menciona que una buena administracion de la demanda energetica tanto por los usuarios como los que prestan el servicio, reducira la demanda pico, la adecuacion de las tarifas electricas a las condiciones reales y el ahorro de los energeticos y el crecimiento estrategico de la carga

Research activities in the use of energy; Actividades de investigacion en el uso de la energia electrica

Energy Technology Data Exchange (ETDEWEB)

Covarrubias Ramos, Rogelio; Garcia Juarez, Francisco [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1998-12-31

The use of energy is intimately related to the development and is found in the human activities of all types, consequently we could say that to a greater usage it must correspond a greater benefit. This paper carries on a comparative analysis of the Mexico`s energy efficiency versus industrialized countries; this analysis shows that while Mexico indicates a growing tendency, in the industrialized countries the tendency is to the drop, unmistakable sign of a better usage of the energy sources. It also makes evident that promoting the energy efficiency in Mexico will stimulate and regulate the energy conservation at National level, in the same way it is mentioned that an appropriate energy demand Management for the users as well as for the service providers, will diminish the peak demand, the adequate application of the electric rates at the actual conditions and the energy saving and the strategic load growth [Espanol] El uso de la energia esta intimamente relacionado con el desarrollo y se encuentra en las actividades humanas de todo tipo, de tal suerte que podriamos decir que a mayor uso debe corresponder un mayor beneficio. En este documento se realiza un analisis comparativo de la eficiencia energetica en Mexico contra paises industrializados; este analisis muestra que mientras Mexico indica una tendencia creciente, en los paises industrializados la tendencia es a la baja, signo inequivoco de un mejor uso de los energeticos, tambien hace ver que la promocion de la eficiencia energetica en Mexico estimulara y regulara el ahorro de energia a nivel nacional, de igual manera se menciona que una buena administracion de la demanda energetica tanto por los usuarios como los que prestan el servicio, reducira la demanda pico, la adecuacion de las tarifas electricas a las condiciones reales y el ahorro de los energeticos y el crecimiento estrategico de la carga

Calculation of the electromagnetic fields in electric machines through the use of the finite element. Algorithms for the solution of induction problems. Pt. 3; Calculo de campos electromagneticos en maquinas electricas mediante elemento finito. Algoritmos para la solucion de problemas de induccion. Pt. 3

Energy Technology Data Exchange (ETDEWEB)

Rosales, Mario F [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1988-12-31

This article is based in the electromagnetic modeling presented in the first part of the series for the indirect solution of partial differential equations. Magnetic systems in closed regions with moving or axial symmetry, whose total current density is partially known (induction problems) are considered. Includes the ability to deal with means in movement and a sinusoidal behavior for the source density current is assumed. Some algorithms are developed that are implanted in the software CALIIE-2D of the Instituto de Investigaciones Electricas (IIE) to obtain the numerical solutions of these problems. The basic systems of algebraic equations are obtained through the application of the Galerkin method in the discreteness of the finite element with first order triangular elements. [Espanol] Este articulo se basa en la modelacion electromagnetica presentada en la primera parte de la serie y en el planteamiento proporcionado en la segunda parte para la solucion indirecta de ecuaciones diferenciales parciales. Se consideran sistemas magneticos en regiones cerradas con simetria traslacional o axial, cuya densidad de corriente total es parcialmente conocida (problemas de induccion). Incluye la capacidad para tratar medios con movimiento y se supone un comportamiento senoidal para la densidad de corriente fuente. Se desarrollan los algoritmos que se implantan en el programa de computo CALIIE-2D del Instituto de Investigaciones Electricas (IIE) para obtener las soluciones numericas de estos problemas. Los sistemas basicos de ecuaciones algebraicas se obtienen mediante la aplicacion del metodo de Galerkin en la discretizacion de elemento finito con elementos triangulares de primer orden.

Predictive analysis on the electric energy distribution systems reliability: applying the synerGEE system; Analisis predictivo de la confiabilidad en los sistemas de distribucion de energia electrica: aplicando el sistema synerGEE

Energy Technology Data Exchange (ETDEWEB)

Gonzalez Andrade, Carlos

2008-12-15

Electrical distribution systems ought to deliver electric power as economical as possible with an acceptable degree of service quality and continuity. Nevertheless, their faults represent one of the main causes of customer's unavailability. At the moment, a wide range of determinist criteria in the improvement of systems reliability based on past behavior are used, but they do not respond to the stochastic nature of system behavior, and are applied without an adequate balance between reliability and economy. In order to obtain this balance a minimum cost planning methodology that considers the predictive analysis of different investment alternatives in addition to the past behavior of the system is required, which guarantees that the economic resource available and limited will be used to gather the greater possible reliability degree. In this work this problem is approached with the fundamentals and methodologies needed to assess the design effects and operative criteria over the main reliability indexes used by the main utilities around the world, with emphasis on the need to optimize economical resources. The use of the system SynerGEETM, is investigated, probing it as a useful tool for the predictive reliability analysis. Due to the lack of experience that exists in Mexico with this type of analysis, distribution engineers has to become familiar with the concepts of the reliability engineering, their application to establish distribution systems models, and acquiring the ability to use the modern simulation tools, allowing them to evaluate the behavior of these systems with enough analytical rigor. In this sense a serial of well known study cases are presented to help them in this labor. [Spanish] Los sistemas de distribucion de energia electrica deben satisfacer la demanda de energia electrica de la forma mas economica posible, con un grado de calidad y continuidad aceptable. Sin embargo, sus fallas son una de las principales causas de indisponibilidad en

Meno misteri nelle viscere del vulcano

OpenAIRE

Chiappini, M.

2006-01-01

La frontiera della ricerca della geofisica moderna si fonda in maniera rilevante su due direttrici al crocevia tra scienza e tecnologia: il progresso tecnologico nella strumentazione per le misure e l'affinamento della capacità di gestione ed elaborazione delle informazioni raccolte. Come in ogni altra scienza sperimentale, i dati e la capacità di saperli analizzare rappresentano pilastri fondamentali nella ricerca geofisica. Allo stato attuale l'Europa è messa a confronto con l'impressionant...

Red Electrica de Espana S.A.. Instrument of regulation and liberalization of the Spanish electricity market (1944-2004)

International Nuclear Information System (INIS)

Garrues-Irurzun, Josean; Lopez-Garcia, Santiago

2009-01-01

To understand the regulation system of the Spanish electricity market it is first necessary to understand on the one hand the system of tariffs and prices, and on the other the organization of the market for high voltage distribution. This article is concerned with this second aspect and traces its history from 1944, this is because before that date it was not possible to speak of a truly national market, but rather only of regional monopolies. In the 1940s, with Franco's new political regime, and the development of the Spanish electricity sector, it became necessary to completely rethink business strategies in relation to competition and cooperation, as well as the regulatory function of the state. In the 1950s, the main feature of the sector was the system of business self-regulation permitted by the state. Throughout the remaining years of Franco's government state intervention was particularly focussed on the subject of tariffs, but with the onset of democracy the state was to involve itself in the transmission network as well. A debate began as to whether it should be run by a private or public operator. In this dispute were ranged, on the one hand, the economic policy concepts of the major parties (PSOE and PP), and against them the strategic interests of the companies. Although the high voltage transmission network was nationalized by the state in the mid-1980s, establishing a 'traditional' model of regulation, the 1990s saw the triumph of a market-based regulation, strongly influenced by the dominant ideas in the European Union, which has converted Red Electrica into a private company. Currently the TSO (Transmission System Operators) model has been extended to Portugal and has entered into competition-cooperation with the other models of the European electricity market. (author)

Criteria for the provision and assembly of the rotor blades of a 300 MW low pressure steam turbine for electrical generation; Criterios para el suministro y ensambles de la alabes de rotor de turbina de vapor de 300 MW baja presion para generacion electrica

Energy Technology Data Exchange (ETDEWEB)

Bertin, Galo; Felix, Jorge A; Quijano, Octavio [Especialistas en Turbopartes, S.A. de C.V., Queretaro, Queretaro (Mexico)

2007-11-15

This paper presents some of the main criteria to consider from the inspection, disassembling and assembly of blades with different root types of a turbine rotor of steam turbines for power generation, having as an aim to count on a reliable rotor, fulfilling with the equipment original design and norms and international standards. [Spanish] Este trabajo presenta algunos de los criterios principales a considerar desde la inspeccion, desmontaje y montaje de alabes de diferentes tipos de raiz de un rotor de turbinas de vapor de generacion electrica, teniendo como finalidad contar con un rotor confiable, cumpliendo con el diseno original del equipo y con normas y estandares internacionales.

TOMOGRAFÍA DE RESISTIVIDAD ELÉCTRICA 3D EN LA CATEDRAL DE MORELIA, MÉXICO (3D Electrical Resistivity Tomography in Morelia Cathedral, Mexico

Directory of Open Access Journals (Sweden)

Gerardo Cifuentes-Nava

2017-12-01

Full Text Available La tradición oral en la ciudad de Morelia, México, así como evidencias parciales en algunos edificios, han llevado a la creencia de la existencia de túneles subterráneos en el centro de esta ciudad, los cuales pertenecerían a la época colonial de nuestro país. Dicho centro fue declarado patrimonio cultural de la humanidad en 1991 por la UNESCO, por lo que es poco factible la excavación o perforación directa destructiva con la intención de explorar. En este contexto, la implementación de técnicas no invasivas es perfecta para localizar zonas de interés, de tal forma que los métodos de exploración geofísica son adecuados, al no ser destructivos y proporcionar una imagen del subsuelo para corroborar la existencia indirecta de estructuras en profundidad. Se presentan los estudios con tomografía de resistividad eléctrica tridimensional (TRE-3D llevados a cabo en 2014, 2016 y 2017 en la Catedral de Morelia y su frente norte, en donde se pueden ubicar estructuras organizadas no acordes con el entorno geológico del sitio, los cuales pueden suministrar indicios de la existencia de diversas estructuras de origen antrópico. La TRE-3D aplicada para este estudio es una combinación entre metodologías convencionales y no convencionales; ofrece una imagen de la distribución de estructuras en profundidad que muestran características concordantes con tradiciones orales y hechos históricos documentados referentes al desarrollo de la Catedral de Morelia a través del tiempo. ENGLISH: Oral traditions, as well as partial evidence in some buildings, have led to a belief in the existence of underground tunnels dating to the colonial period in downtown Morelia, Mexico. The city of Morelia was declared a UNESCO World Heritage Site in 1991, making excavation impossible. Nondestructive geophysical exploration methods, however, can provide an image of the subsoil to test for existence of tunnels or other subterranean structures. This paper reports

Analysis of the generation of electric energy through the use of biogas obtained from sanitary fillings in Mexico; Analisis de la generacion de energia electrica a traves de biogas procedente de rellenos sanitarios en Mexico

Energy Technology Data Exchange (ETDEWEB)

Cerda Sauvage, Tania Kalinka [Facultad de Ingenieria, Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico)

2004-06-15

Through this work a theoretical analysis conducted for the use of biogas obtained from sanitary landfills for the generation of electrical energy is presented, as well as the evaluation of the main elements that limit or favor the development of this technology in our country. In the introductory part of this work are presented some causes considered have favored the development of technologies as the one proposed here. In the first part it is exposed what the biogas is and what conditions are necessary for its production, which explains the production of biogas in the sanitary landfills, in addition, describes the distribution of the solid residues that give raise to the present situation of the sanitary landfills and the biogas production process in these. The work continues with a description of the electrical energy generation process through the gas originated in sanitary landfills, indicating the necessary conditions in order that the filling complies with its basic functions; following our process until obtaining the final item, electrical energy. For the description of the process and to analyze some factors that take part, it is advisable to include the main aspects of a plant located in Monterrey that occupies this technology. This project shows project shows off in a tangible form the barriers that this technology faces, as well as its main advantages and disadvantages. Are exposed the limiting factors of this technology in technological, economic, political and social aspects, the barriers that can and must overcome as well as the reasons that justify the effort to overcome them. Finally are presented the conclusions it arrives, as well as the commentaries and suggestions in respect to the subject. [Spanish] A traves de este trabajo se expone un analisis teorico efectuado al uso de biogas extraido de rellenos sanitarios para la generacion de energia electrica, asi como evaluar los principales elementos que limitan o favorecen el desarrollo de esta

Design and construction of the prototype of a digital meter of single phase electric energy based in a microcontroller; Diseno y construccion del prototipo de un medidor digital de energia electrica monofasico basado en un microcontrolador

Energy Technology Data Exchange (ETDEWEB)

Martinez Alonso, Ruben

2003-10-15

This research work presents the design and construction of a single-phase microcontroller-based digital electric energy meter. The digital instrument displays the energy demand (kw-h) based on up-to-date tariff provided by the Mexican national utility Comision Federal de Electricidad (CFE). The meter digitally processes voltage and current line waveform samples taken at its input, displaying, in real time, the number of electrical parameters calculated. For a better instrument performance a PIC16F874 microcontroller from microchip has been used as computational core. The parameters of interest are visualized in a liquid crystal display of 2 X 16 characters. The user interface includes a menu where some of the parameters can be selected by the operator. In the event of an electric power supply disruption the meter keeps to the energy consumption in memory. The voltage and current measured levels ranges from 1 to 255 Vrms and 0.1 to 25.5 Arms, respectively. The power is displayed in 5 digits ranging from 0 to 6502.5 watts and the energy is displayed with 5 whole digits and 5 decimals ranging, from 0 kWh up to 99999.99999 kWh. These values are refreshed every one second together with the actual electrical consumption cost which ranges from 0 up to 9999.9 pesos. The digital measuring instrument has been built based on four main inter-connected modules named, data acquisition; signal conditioning; signal processing; and display. A set of efficient assembly code routines has been developed in order to calculate the number of electrical parameter previously described. After a debugging process, the optimised code has been assembled for the PIC16F874. [Spanish] El trabajo presenta el diseno y construccion de un medidor digital de energia electrica basado en un microcontrolador, el cual visualiza la demanda por el consumo de kWh, basandose en una tarifa escalonada de tipo domestico de CFE. Tambien el aparato visualiza voltaje, corriente, potencia y el tiempo de medicion

Multidisciplinary projects and investigations on the solid earth geophysics; Metodi e prospettive per una maggiore conoscenza della crosta terrestre

Energy Technology Data Exchange (ETDEWEB)

Slejko, D. [Consiglio Nazionale delle Ricerche, Gruppo Nazionale di Geofisica della Terra Solida, Trieste (Italy)

2001-07-01

Physical phenomena that occur in the solid part of the Earth are investigated by Solid Earth Geophysics together with problems related to the shape, location, and characteristics of the different parts that constitute the Earth. Repeated measurements lead the scientists to model the past evolution of the various processes as well as to forecast the future ones. Various disciplines refer to Solid Earth Geophysics, they are: Seismology, Gravimetry, Magnetometry, Geothermics, Geodesy, Geo electromagnetism, and Seismic Exploration. A special citation is due to Applied Geophysics, which are devoted to the identification of minerals, energetic and natural resources. The National Group of Solid Earth Geophysics was constituted in 1978 by CNR for promoting, developing, and coordinating researches related to Solid Earth Geophysics. The limited annual financial budget has conditioned the realisation of relevant multi-disciplinary projects. Nevertheless, important results were obtained in all different fields of Geophysics and were disseminated during the annual conference of the Group. A summary review of the main topics treated during the last conference is given here and some ideas for future research projects are presented. [Italian] La Geofisica della Terra Solida e' quella branca delle scienze e delle tecnologie che prende in considerazione dei fenomeni connessi con le caratteristiche fisiche della parte solida della Terra. La complessita' della costituzione della Terra e della sua evoluzione nel tempo implica che vengano prese in considerazione tutte le fenomenologie che si riescono a misurare e che costituiscono branche diverse della Geofisica: la Sismologia, la Gravimetria, la Magnetometria, la Geotermia, la Geodesia, il Geoelettromagnetismo, la Geofisica applicata. Ognuna di queste branche della Geofisica ha avuto in passato uno sviluppo quasi del tutto indipendente con collaborazioni o integrazioni dirtte ad obiettivi specifici, limitati anche nel tempo

ANNALS OF GEOPHYSICS: AD MAJORA

Directory of Open Access Journals (Sweden)

Fabio Florindo

2014-03-01

Full Text Available Annals of Geophysics is a bimonthly international journal, which publishes scientific papers in the field of geophysics sensu lato. It derives from Annali di Geofisica, which commenced publication in January 1948 as a quarterly periodical devoted to general geophysics, seismology, earth magnetism, and atmospheric studies. The journal was published regularly for a quarter of a century until 1982 when it merged with the French journal Annales de Géophysique to become Annales Geophysicae under the aegis of the European Geophysical Society. In 1981, this journal ceased publication of the section on solid earth geophysics, ending the legacy of Annali di Geofisica. In 1993, the Istituto Nazionale di Geofisica (ING, founder of the journal, decided to resume publication of its own journal under the same name, Annali di Geofisica. To ensure continuity, the first volume of the new series was assigned the volume number XXXVI (following the last issue published in 1982. In 2002, with volume XLV, the name of the journal was translated into English to become Annals of Geophysics and in consequence the journal impact factor counter was restarted. Starting in 2010, in order to improve its status and better serve the science community, Annals of Geophysics has instituted a number of editorial changes including full electronic open access, freely accessible online, the possibility to comment on and discuss papers online, and a board of editors representing Asia and the Americas as well as Europe. [...

Electric power saving in the drinkable water, sewage and sanitation system, La Piedad; Ahorro de energia electrica en el sistema de agua potable, alcantarillado y saneamiento de La Piedad

Energy Technology Data Exchange (ETDEWEB)

Sistema de Agua Potable, Alcantarillado y Saneamiento de la Piedad (Mexico). E-mail: sapaslapiedad@prodigy.net.mx

2006-04-15

In Michoacan, Mexico, a project who seeks to benefice the Municipal public resources was crated in 1994. It would be achieved trough the electric power saving in the public lighting system, and drinkable water pumping and black water, since those activities required the budget biggest part. The program could be developed recently and the saving was significant. In addition the electromechanical efficiency increased in the equipment installation. This work is an example for other States to do something similar that can improve their conditions. [Spanish] En el estado de Michoacan, Mexico se creo un proyecto en el ano de 1994, el cual buscaba beneficiar los recursos publicos municipales, a traves del ahorro de la energia electrica en los sistemas de alumbrado publico y bombeo de agua potable y aguas negras, ya que estas actividades son las que requieren la mayor parte del presupuesto. El programa pudo llevarse a cabo en anos recientes y el ahorro fue significativo, ademas de que aumento la eficiencia electromecanica en los equipos que se instalaron, y esta obra ha servido de ejemplo a otros estados para que realicen algo similar que pueda mejorar su situacion.

Estudio geoeléctrico en el valle alto del Rio Patía

Directory of Open Access Journals (Sweden)

Pérez Cerón Rosalbina

1995-10-01

: sedimentos recientes con resistividades que varían entre 20 y 400 Ohm-m, areniscas de grano fino a medio con resistividades entre 20 y 70 Ohm-m, limolitas a areniscas de grana fino, con resistividades entre 8 y 20 Ohm-m y un basamento arcilloso con resistividades menores de 20 Ohm-m. Se presentan dos tipos de aculleros: libres, asociados con arenas y gravas de abanicos y terrazas aluviales (resistividades entre 70 y 400 Ohm-m y espesores entre 25 y 75 m, y semiconfinados conformados por unidades arenáceas del Terciario (resistividades entre 20 y 30 Ohm-m, con espesores entre 35 y 150 m. La calidad del agua es buena con bajo contenido de sales para los primeros acuíferos, siendo un poco salobre para los segundos. Por otro lado el estudio geoeléctrico mostró la presencia de una serie de discontinuidades eléctricas, asociadas con lineamientos y tallas geológicas, algunas de las cuales fueron cartografiadas en el estudio geológico del área. En general la geoeléctrica mostró una tectónica de bloques que afecta las rocas cretácicas y terciarias, y seguramente los sedimentos cuaternarios

Energy losses produced by differential currents in the metallic ducts of electric installations; Perdidas de energia producidas por corrientes diferenciales en la tuberia metalica de instalaciones electricas

Energy Technology Data Exchange (ETDEWEB)

Campero L, Eduardo; Bratu S, Neagu; Marquez M, Luis; Caballero R, Rafael [Universidad Autonoma Metropolitana Unidad Azcapotzalco, Mexico, D. F. (Mexico)

1994-12-31

In this article it is explained what is known as differential currents and the conditions in which they appear in the electrical installations. A short outline is made on the magnetic induction phenomenon that appears in metallic conduits, due to the circulation of differential currents along the inside of the tube and that in turn produces energy losses in the form of heat, that is dissipated in the tube surrounding environment. The results of the measurements performed in the laboratory are shown in order to quantify the energy losses in the metallic conduit. It was found that for certain conditions these losses are significant. [Espanol] En este articulo se explica lo que se entiende por corrientes diferenciales y se describen las condiciones en las que estas aparecen en las instalaciones electricas. Se plantea brevemente el fenomeno de induccion magnetica que aparece en las tuberias metalicas, debido a la circulacion de corrientes diferenciales por el interior del tubo y que a su vez produce perdidas de energia en forma de calor, que se disipa en el ambiente que rodea al tubo. Se muestran los resultados de las mediciones que se llevaron a cabo en laboratorio para poder cuantificar las perdidas en tuberia metalica conduit. Se encontro que para ciertas condiciones estas perdidas son significativas.

Importance of the validation of saving technologies of electric power; Importancia de la validacion de tecnologias ahorradoras de energia electrica

Energy Technology Data Exchange (ETDEWEB)

Valer Negrete, Adrian [Programa de Ahorro de Energia del Sector Electrico (PAESE), Comision Federal de Electricidad (Mexico)

2003-07-01

Within the Programs of Energy Saving it is fundamental the search and application of new technologies, with which this saving can be obtained, selected with base in their technical characteristics that allow to reduce to the consumptions and demands of power, without damaging the electric networks nor the transformers of the Comision Federal de Electricidad. It is important that the investments which are made count on attractive periods of capital recovery, in comparison with the useful life of the product, reason why the knowledge and price of the new technologies will be parameters to consider in an important manner, creating the need of conducting tests that verify the veracity of the information of the supplier, resulting in certain cases, the change of design of these technologies, so that thus they fulfill the engaged characteristics. This paper indicates the characteristics that the new saving technologies of electrical energy must fulfill and the tests and parameters to consider their evaluation. [Spanish] Dentro de los Programas de Ahorro de Energia es fundamental la busqueda y aplicacion de nuevas tecnologias, con las que se pueda obtener dicho ahorro, seleccionadas con base en sus caracteristicas tecnicas que permitan reducir los consumos y demandas de potencia, sin danar las redes ni transformadores de la Comision Federal de Electricidad. Es importante que las inversiones que se realicen cuenten con periodos de recuperacion de capital atractivos, comparados con la vida util del producto, por lo que el conocimiento y precio de las nuevas tecnologias seran parametros a considerar de manera importante, creandose la necesidad de realizar pruebas que verifiquen la veracidad de la informacion del proveedor, resultando en determinados casos, el cambio de diseno de dichas tecnologias, para que asi cumplan las caracteristicas prometidas. Este trabajo indica las caracteristicas que deben cumplir las nuevas tecnologias ahorradoras de energia electrica y las

Northern Division. Distribution Zone. Juarez.; Division norte. Zona de distribucion. Juarez

Energy Technology Data Exchange (ETDEWEB)

Mendoza, J. M. [Comision Federal de Electricidad (CFE) (Mexico)

2005-07-01

The public service law of electrical energy, its regulation and the manual of services to the public in the matter of electrical energy govern the sale of electrical energy. The Secretaria de Hacienda y Credito Publico altogether with the participation of the Secretarias of Energia, de Comercio y Fomento Industrial, and to the proposal of the Comision Federal de Electricidad (CFE), fixes the tariffs, their adjustment or restructuring. The CFE mission is to satisfy the electrical energy necessities and expectations of the clients, through a profitable and competitive organization, guaranteeing the integral development of its collaborators. Its product, electrical energy, is received from other areas within the CFE. The electrical tariffs simultaneously fulfill three functions: financial, economical and social. [Spanish] La venta de energia electrica se rige por la ley del servicio publico de energia electrica, su reglamento, el manual de servicios al publico en materia de energia electrica. La Secretaria de Hacienda y Credito Publico con la participacion de las Secretarias de Energia, de Comercio y Fomento Industrial, y a propuesta de la Comision Federal de Electricidad (CFE), fija las tarifas, su ajuste o reestructuracion. La mision de CFE es satisfacer las necesidades y expectativas de energia electrica de los clientes, a traves de una organizacion rentable y competitiva, garantizando el desarrollo integral de sus colaboradores. Su producto, la energia electrica, la reciben de otras areas dentro de la CFE. Las tarifas electricas cumplen simultaneamente tres funciones: financiera, economica y social.

The fuel cells: Truths on the generation of clean and efficient electricity electrochemical way; Las celdas de combustible: Verdades sobre la generacion de electricidad limpia y eficiente via electroquimica

Energy Technology Data Exchange (ETDEWEB)

Cano Castillo, Ulises [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

1999-07-01

In the search of alternative technologies for the generation of electrical energy, the Instituto de Investigaciones Electricas (IIE) has put special attention in a technology that promises to be key in the next years: The fuel cells, it is for this reason that in this article a review of this type of cells is presented, as well as its basic characteristics and benefits as a result of its use for the generation of electrical energy. [Spanish] En la busqueda de tecnologias alternativas de generacion de energia electrica, el Instituto de Investigaciones Electricas (IIE) ha puesto atencion especial en una tecnologia que promete ser clave en los proximos anos: Las celdas de combustible, es por ello que en este articulo se presenta una resena de este tipo de celdas, asi como sus caracteristicas principales y beneficios como resultado de su utilizacion para la generacion de energia electrica.

Photovoltaic rural electrification and the electric power utility. Workshop. [Selected Papers

Energy Technology Data Exchange (ETDEWEB)

Huacuz, J. M.; Villasenor, F.; Urrutia, M. [eds.] [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1995-12-31

This document contains the national and international programs about photovoltaic systems for rural electrification and the electric power utility experiences about PV programs. The IERE Workshop was hold from May 8 to 12, 1995 in Cocoyoc, Mexico. It was organized by the Electrical Research Institute of Mexico (Instituto de Investigaciones Electricas (IIE)) and the U.S. Electric Power Research Institute (EPRI). The Workshop was attended by 38 delegates from 13 countries [Espanol] Este documento contiene los programas nacionales e internacionales sobre electrificacion fotovoltaica rural y las experiencias en programas fotovoltaicos de empresas electricas. El taller de trabajo IERE fue realizado los dias del 8 al 12 de mayo de 1995 en Cocoyoc, Mexico. Fue organizado por el Instituto de Investigaciones Electricas (IIE) y el U.S. Electric Power Research Institute (EPRI) (Instituto de Investigaciones de Energia Electrica de Estados Unidos). A este taller de trabajo asistieron 38 delegados de 13 paises

Photovoltaic rural electrification and the electric power utility. Workshop. [Selected Papers

Energy Technology Data Exchange (ETDEWEB)

Huacuz, J M; Villasenor, F; Urrutia, M [eds.; Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1996-12-31

This document contains the national and international programs about photovoltaic systems for rural electrification and the electric power utility experiences about PV programs. The IERE Workshop was hold from May 8 to 12, 1995 in Cocoyoc, Mexico. It was organized by the Electrical Research Institute of Mexico (Instituto de Investigaciones Electricas (IIE)) and the U.S. Electric Power Research Institute (EPRI). The Workshop was attended by 38 delegates from 13 countries [Espanol] Este documento contiene los programas nacionales e internacionales sobre electrificacion fotovoltaica rural y las experiencias en programas fotovoltaicos de empresas electricas. El taller de trabajo IERE fue realizado los dias del 8 al 12 de mayo de 1995 en Cocoyoc, Mexico. Fue organizado por el Instituto de Investigaciones Electricas (IIE) y el U.S. Electric Power Research Institute (EPRI) (Instituto de Investigaciones de Energia Electrica de Estados Unidos). A este taller de trabajo asistieron 38 delegados de 13 paises

Reliability of electric generation units by evaluating the loss of power and efficiency of turbines; Confiabilidad de las unidades de generacion electrica mediante la evaluacion de la perdida de potencia y eficiencia de las turbinas

Energy Technology Data Exchange (ETDEWEB)

Ramirez Solis, Jose Antonio; Cristalinas Navarro, Victor Manuel [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2012-07-01

The aim of the specialized technical service to evaluate the loss of power and efficiency of an open steam turbine is to quantify these losses caused by the deterioration of internal seals, deterioration of the steam path geometry components (nozzles and blades) and increased roughness of the blades and nozzle surface due to erosion (steam, humidity and impacts) and, also, due to salts deposition. In the same way, to establish a set of recommendations, in order of importance by the attention of the Power Plant with the purpose of recovering the major quantity of power and efficiency lost by the steam turbine and assurance, by means of technical supervision of the activities set in the recommendations, and in accordance with CFE rules, international standards and the personal experience of the Instituto de Investogaciones Electricas (IIE), staff, an acceptable quality in rehabilitation of mechanical components such as the maintenance of the steam turbine itself. Using an application example, this paper describes, the methodology of execution of this kind of services. Also, the quality of the maintenance and the rehabilitation of the steam turbine components are quantified. [Spanish] El objetivo del servicio tecnico especializado para evaluar la perdida de potencia y eficiencia de una turbina de vapor abierta es cuantificar dichas perdidas a causa del deterioro de los sellos internos, del deterioro la geometria de referencia de los componentes del canal de vapor (alabes fijos y alabes moviles) y del aumento de la rugosidad de la superficie de los alabes a causa de la erosion (marcas de vapor, de humedad y de impactos) y de la deposicion de sales. Asimismo, establecer una serie de recomendaciones en orden prioritario para la atencion de la central, con el fin de recuperar la mayor parte de la potencia y eficiencia perdidas por la turbina y asegurando, mediante la supervision tecnica de las actividades resultantes de las recomendaciones y conforme a la normativa de la

Actions in the electrical sector to propitiate the environmental protection; Acciones en el sector electrico para propiciar la proteccion ambiental

Energy Technology Data Exchange (ETDEWEB)

Trevino Gaspari, Mateo [Fideicomiso de Ahorro de Energia (FIDE) (Mexico)

1997-07-01

The saving of electrical energy is one of the most efficient means to propitiate the environmental protection in the surroundings of the facilities used in the production of electrical energy. The emission of polluting agents associated with the electric power generation is analyzed, among them, CO{sub 2}, SO{sub 2} and NO{sub 2}, along with the particulate emission of ash or soot. In addition, an analysis is made of the contribution of the electrical energy saving to the environmental protection and the actions that the Comision Federal de Electricidad of Mexico will undertake on the electric energy saving for the 1995 to the 2000 period. [Spanish] El ahorro de energia electrica es uno de los medios mas eficientes para propiciar la proteccion ambiental en el entorno de las instalaciones usadas en la produccion de energia electrica. Se analiza la emision de contaminantes asociados con la generacion electrica, entre ellos, el CO{sub 2}, el SO{sub 2} y NO{sub 2}, junto con la emision de particulas de ceniza o de hollin. Ademas se analiza la contribucion del ahorro de energia electrica a la proteccion ambiental y las acciones que emprendera la Comision Federal de Electricidad de Mexico sobre ahorro de energia electrica para el periodo 1995 al 2000.

Variación de los parámetros eléctricos de la arena con la frecuencia

Directory of Open Access Journals (Sweden)

Oscar Germán Duarte Velasco

2012-05-01

Full Text Available Este artículo presenta los resultados de dos tipos de pruebas hechas a una clase de arena para obtener los valores de resistividad y permitividad eléctricas en el rango de los Hz hasta los MHz. Una de las pruebas fue realizada a frecuencias específicas con un generador de señales, y la otra fue hecha con un generador de impulsos de tensión, con lo cual se trabajó un espectro continuo de frecuencias. Las pruebas se llevaron a cabo para tres valores de humedad, y los resultados de ambas mostraron un comportamiento no lineal presente en la superficie de los electrodos de prueba. Esta no linealidad fue modelada y considerada en el procedi-miento de cálculo de los valores de permitividad y resistividad en el dominio de la frecuencia. Finalmente, se señalan los resultados, las conclusiones y el trabajo futuro.

Electrical energy saving in motors and frequency variators; Ahorro de energia electrica en motores y variadores de frecuencia

Energy Technology Data Exchange (ETDEWEB)

Garcia Neri, Roger [Comision Federal de Electricidad (CFE) (Mexico)

2005-07-01

The necessity of saving energy is urgent and undeniable. We must already begin with the rational use of energy. Which is obtaining the maximum benefit of the consumed energy and of the necessary facilities for its generation, transmission and use. Guaranteeing at the same time an operation free of interferences or interruptions for the users. The electricity in alternating current does not allow its storage, reason why it is necessary to generate and distribute it at the precise moment when it is required. This forces to determine the proportions of the generation facilities, to be able to feed the periods of maximum demand called {sup p}eaks{sup .} It is this very point where the problem of the inappropriate use of the electrical energy starts. The energy waste is self-evident during the periods of low demand because of the low efficiency of the sub-utilized facilities. Electrical motors of the induction type use approximately more than 60% of the energy in the industry. If we use high efficiency motors instead of standard motors, a better advantage of the energy demanded from Comision Federal de Electricidad (CFE) is obtained. [Spanish] Es impostergable e innegable la necesidad de ahorrar energia. Tenemos que empezar ya con el uso racional de la energia: Obtener el maximo beneficio de la energia consumida y de las instalaciones necesarias para su generacion, transmision y utilizacion. Garantizando a los usuarios un funcionamiento sin interferencias o interrupciones. La electricidad en corriente alterna no permite su almacenamiento, por lo que es necesario generarla y distribuirla en el momento preciso en que es requerida. Esto obliga a dimensionar las instalaciones de generacion, para poder alimentar los periodos de maxima demanda llamados pico. Desde esta parte inicia el problema de la mala utilizacion de la energia electrica. Ya que en los periodos de baja demanda, las instalaciones se encuentran subutilizadas y si su eficiencia es muy baja, el desperdicio de

Photovoltaic systems interconnected to the electric network; Sistemas fotovoltaicos interconectados a la red electrica

Energy Technology Data Exchange (ETDEWEB)

Agredano Diaz, Jaime [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2007-06-15

. Enseguida, se muestra la solucion que le encontro el Gobierno del Estado a este problema para lo que fue necesaria la participacion del Instituto de Investigaciones Electricas (IIE). Esta participacion, se traduce en un proyecto que muestra la viabilidad de instalar sistemas fotovoltaicos interconectados a la red de la Comision Federal de Electricidad (CFE) en casas habitacion. Despues, se presenta una descripcion no solo de los elementos que conforman el sistema, sino tambien de la metodologia y el funcionamiento del mismo. Posteriormente, se presenta el efecto positivo, economicamente y ambientalmente hablando, que tuvo la instalacion del sistema en las 220 casas habitacion del fraccionamiento Valle de las Misiones, asi como las caracteristicas generales del mismo. Ademas, se presenta la manera de alcanzar un mayor impacto y cobertura del sistema. Finalmente, se presentan los auspiciadotes del proyecto: la Secretaria de Energia (SENER), la CFE, la Comision Reguladora de Energia (CRE), la Universidad Autonoma de Baja California (UABC), el IIE, el Banco de Desarrollo de America del Norte (BDAN) y el Gobierno del Estado de Baja California.

Geoelectrical characterization of a site with hydrocarbon contamination caused by pipeline leakage

Energy Technology Data Exchange (ETDEWEB)

Delgado-Rodriguez, Omar; Shevnin, Vladimir; Ochoa-Valdes, Jesus [Instituto Mexicano del Petroleo, Mexico, D.F. (Mexico); Ryjov, Albert [Moscow State Geological Prospecting Academy, Moscow (Russian Federation)

2006-01-15

contaminadas dentro del acuifero. El acuifero y el acuitardo fueron caracterizados con base en su resistividad, contenido de arcilla, porosidad y capacidad de intercambio cationico. Los valores de resistividad fueron recalculados a valores de parametros petrofisicos utilizando un algoritmo de inversion que toma en cuenta la salinidad del agua de poro. En zonas no contaminadas los parametros petrofisicos estimados a partir de datos de resistividad presentan valores cercanos a los reales, mientras que en zonas contaminadas se obtienen valores anomalos. Efectos similares de la influencia contaminacion sobre los parametros petrofisicos fueron encontrados en laboratorio realizando mediciones de resistividad en muestras de arena limpia y contaminada.

The electric power generation in Mexico and its environmental impacts: Past, present and future; La generacion electrica en Mexico y sus impactos ambientales: Pasado, presente y futuro

Energy Technology Data Exchange (ETDEWEB)

Quintanilla Martinez, Juan [Programa Universitario de Energia (PUE), Universidad Nacional Autonoma de Mexico (UNAM), Mexico, D. F. (Mexico)

1997-12-31

The purpose of this paper is to analyze the historical evolution, past and present of the installed capacity and of the electric power generation, as well as the fuel consumption and the associated green-house gases emission. Also, under the technique of economic scenarios and future towns (in short and mediate terms) the potential needs of installed capacity, generation, mix and fuel consumption and associated green gases emissions is analyzed. Later on a comment is made on the energy implications of the substitution of fuels policies and the environmental Standards. Finally, a series of comments is established on the possible technological directions for the sector, from the stand point of generation efficiency and its effects in the reduction of emissions [Espanol] El proposito del presente trabajo es analizar la evolucion historica, pasada y presente, de la capacidad instalada y de la generacion electrica, asi como el consumo de combustibles y las emisiones de gases de invernadero asociadas. Tambien se analiza bajo la tecnica de escenarios economicos y poblaciones a futuro (en el corto y mediano plazo) las posibles necesidades de capacidad instalada, generacion, mezcla y consumo de combustibles y emisiones de gases de invernadero asociadas. Posteriormente se comenta sobre las implicaciones energeticas de las politicas de sustitucion de combustibles y estandares ambientales. Por ultimo se establecen una serie de comentarios sobre las posibles direcciones tecnologicas para el sector, desde el punto de vista de la eficiencia de generacion y sus efectos en la reduccion de las emisiones

Algorithms for the evaluation of the reliability of networks and substations; Algoritmos para evaluar la confiabilidad de redes y subestaciones electricas

Energy Technology Data Exchange (ETDEWEB)

Vega Ortiz, Miguel [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2001-07-01

Two algorithms are presented, one for analyzing the reliability of networks and another one to analyzing the reliability of electrical substations. The algorithms model a network or a substation by means of a graph and determine all the exits, of up to third degree, which isolates the load points. The algorithm that is used for the network analysis, is the one of p-cuts and in the case of the substations it is the one of minimum ways, for later, from these minimum p-cuts and of the minimum ways, obtains the minimum cuts. These minimum cuts are evaluated with the approximate method and give as a result the system reliability and of each one of the components that have been modeled. At the end some examples and results obtained are shown. As case of study, the algorithm is applied to two substations arrangements and to a network of industrial distribution, but it is possible to be applied to transmission and distribution networks. [Spanish] Se presentan dos algoritmos, uno para analizar la confiabilidad de redes y otro para analizar la confiabilidad de subestaciones electricas. Los algoritmos modelan una red o una subestacion por medio de un grafo y determinan todas las salidas, de hasta tercer grado, que aislan los puntos de carga. El algoritmo que se utiliza para el analisis de redes, es el de p-cortes y en el caso de las subestaciones es el de caminos minimos, para despues, a partir de estos p-cortes minimos y de los caminos minimos, obtener los cortes minimos. Estos cortes minimos se evaluan con el metodo aproximado y dan como resultado la confiabilidad del sistema y de cada una de las componentes que se hayan modelado. Al final se muestran algunos ejemplos y resultados obtenidos. Como caso de estudio, el algoritmo se aplica a dos arreglos de subestaciones y a una red de distribucion industrial, pero se puede aplicar a redes de transmision y de distribucion.

Microestrutura, fases cristalinas e propriedades elétricas de porcelanas aluminosas contendo diferentes concentrações de Fe2O3sinterizadas em atmosfera redutora e oxidante

Directory of Open Access Journals (Sweden)

D. H. Piva

2015-09-01

Full Text Available ResumoPorcelanas aluminosas contendo diferentes concentrações de Fe2O3 foram sinterizadas em atmosfera oxidante e redutora. A microestrutura e fases formadas foram investigadas com o auxílio de difração de raios X e microscopia eletrônica de varredura. Espectroscopia de impedância foi utilizada para estudar as propriedades elétricas. Os resultados indicaram que todas as amostras apresentaram mulita e coríndon como fases majoritárias e pequenas frações de quartzo. A adição de Fe2O3 provocou o surgimento de hematita nas amostras sinterizadas em atmosfera oxidante e, ferro metálico nas amostras contendo > 3%p sinterizadas em atmosfera redutora. Os espectros de impedância indicam que as características da fase vítrea e interface entre fase vítrea /fases cristalinas regem o comportamento elétrico global das amostras. Não obstante, diferentes atmosferas de queima provocam efeitos opostos na resistividade elétrica das porcelanas contendo Fe2O3. A presença de hematita foi considerada a responsável pela diminuição da resistividade elétrica nas amostras sinterizadas em atmosfera oxidante, enquanto que o aumento na resistividade elétrica das amostras sinterizadas em atmosfera redutora foi atribuído à elevada quantidade de fase vítrea e porosidade. Estes resultados indicam que atmosfera redutora durante a queima pode favorecer o uso de matérias-primas com maiores concentrações de Fe2O3, desde que todo óxido de ferro tenha se dissolvido na fase liquida durante a queima.

The presence of harmonics in electric installations and some of its consequences; La presencia de corrientes armonicas en instalaciones electricas y algunas de sus consecuencias

Energy Technology Data Exchange (ETDEWEB)

Bratu Serban, Neagu; Campero Littlewood, Eduardo [Universidad Autonoma Metropolitana Azcapotzalco, Mexico, D. F. (Mexico)

1996-12-31

This paper is a short introduction to how the sinusoidal voltage waves are generated. A revision is made on the way of representing a distorted wave and the way of quantifying its harmonics content (harmonics distortion). An overview is made of the non-lineal consuming elements that produce distortion of the current waves. A revision is made on the concept of a power factor in conditions of waves with harmonic distortion. The consequences of feeding with distorted waves the different devices such as motors (particularly for the distortion originated by the rectifiers and the velocity electronic controls), transformers and capacitors. Mention is made of some of the methods for not to produce or for reducing the harmonic effect in the electric networks. The purpose of this article is to review the consequences on energy consumption by the presence of harmonics. [Espanol] En este articulo se hace una breve introduccion de la forma en que se generan las ondas senoidales de voltaje. Se revisa la manera de representar una onda distorsionada y la manera de cuantificar su contenido de armonicas (distorsion armonica). Se repasan los elementos consumidores no lineales que producen la deformacion de las ondas de corriente. Se revisa el concepto de factor de potencia en condiciones de ondas con distorsion armonica. Se analizan las consecuencias de alimentar con ondas distorsionadas a diferentes equipos como motores (particularmente por la distorsion originada por los rectificadores y los controladores de velocidad electronicos), transformadores y capacitores. Se mencionan algunos metodos para no producir, o reducir el efecto armonico en las redes electricas. El proposito de este articulo es revisar las consecuencias sobre el consumo de energia por la presencia de armonicas.

The presence of harmonics in electric installations and some of its consequences; La presencia de corrientes armonicas en instalaciones electricas y algunas de sus consecuencias

Energy Technology Data Exchange (ETDEWEB)

Bratu Serban, Neagu; Campero Littlewood, Eduardo [Universidad Autonoma Metropolitana Azcapotzalco, Mexico, D. F. (Mexico)

1997-12-31

This paper is a short introduction to how the sinusoidal voltage waves are generated. A revision is made on the way of representing a distorted wave and the way of quantifying its harmonics content (harmonics distortion). An overview is made of the non-lineal consuming elements that produce distortion of the current waves. A revision is made on the concept of a power factor in conditions of waves with harmonic distortion. The consequences of feeding with distorted waves the different devices such as motors (particularly for the distortion originated by the rectifiers and the velocity electronic controls), transformers and capacitors. Mention is made of some of the methods for not to produce or for reducing the harmonic effect in the electric networks. The purpose of this article is to review the consequences on energy consumption by the presence of harmonics. [Espanol] En este articulo se hace una breve introduccion de la forma en que se generan las ondas senoidales de voltaje. Se revisa la manera de representar una onda distorsionada y la manera de cuantificar su contenido de armonicas (distorsion armonica). Se repasan los elementos consumidores no lineales que producen la deformacion de las ondas de corriente. Se revisa el concepto de factor de potencia en condiciones de ondas con distorsion armonica. Se analizan las consecuencias de alimentar con ondas distorsionadas a diferentes equipos como motores (particularmente por la distorsion originada por los rectificadores y los controladores de velocidad electronicos), transformadores y capacitores. Se mencionan algunos metodos para no producir, o reducir el efecto armonico en las redes electricas. El proposito de este articulo es revisar las consecuencias sobre el consumo de energia por la presencia de armonicas.

Fiber optics for voltage and current measurement; Utilizacion de fibras opticas en la medicion de voltaje y corriente

Energy Technology Data Exchange (ETDEWEB)

Mendieta Jimenez, Francisco Javier; Santos Dominguez, Martin; Gutierrez Martinez, Celso [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1988-12-31

This paper offers a brief revision of the techniques employed in the voltage and current measurement in power plants and mention is made also of its main limitations. Likewise the optical methods of transduction of the mentioned electrical variables indicating their advantages and difficulties for its implementation. Finally the activities developed at the Instituto de Investigaciones Elctricas (IIE) in this field are described. [Espanol] En este trabajo se ofrece una breve revision de las tecnicas utilizadas en la medicion de voltaje y corriente en plantas electricas y se mencionan sus principales limitaciones. Asimismo, se presentan los metodos opticos de transduccion de las variables electricas mencionadas, indicando sus ventajas y las dificultades para su realizacion. Finalmente, se describen las actividades que se desarrollan en el Instituto de Investigaciones Electricas (IIE) en este campo.

Generating power stations and optimization energetic of processes; Centrales generadoras y optimacion energetica de procesos

Energy Technology Data Exchange (ETDEWEB)

Gutierrez Ramirez, Ranulfo; Fernandez Montiel, Manuel Francisco [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

1999-07-01

Some recent experiences of the Management of Thermal Processes of the Instituto de Investigaciones Electricas (IIE) related to the works on generating power stations of electricity, plants of cogeneration and energy saving are presented. [Spanish] Se presentan algunas experiencias recientes de la Gerencia de Procesos Termicos del Instituto de Investigaciones Electricas (IIE) relacionadas con los trabajos sobre centrales generadoras de electricidad, plantas de cogeneracion y ahorro de energia.

Tomografía de resistividad eléctrica aplicada a la caracterización de sitios contaminados en tambos Electrical resistivity tomography applied to the characterization of contaminated sites at dairies

Directory of Open Access Journals (Sweden)

Beatriz N Losinno

2008-12-01

Full Text Available La calidad del agua subterránea en los tambos, utilizada para consumo animal, puede tener incidencia en la calidad de la leche, por lo cual es importante conocer el efecto de los lixiviados sobre el suelo y el agua subterránea. El objetivo fue detectar anomalías de conductividad eléctrica (CE en zona no saturada y saturada por medio de la tomografía de resistividad eléctrica, en sitios potencialmente contaminados en dos tambos, uno en Venado Tuerto y otro en Carmen de Areco y su relación con las propiedades físico-químicas del suelo y agua subterránea. En Carmen de Areco, en un suelo franco limoso con la presencia de un horizonte arcilloso (Bt el sitio más comprometido resultó el corral de encierre cercano a la zona de ordeñe, con anomalía de conductividad eléctrica del 60% en la zona no saturada respecto a sondeos testigos, mientras que la zona de alimentación, que periódicamente se traslada de lote, no se vió afectada. En Venado Tuerto, en un suelo franco arenoso de textura más gruesa, la zona de alimentación, con una anomalía del 84% y con una carga animal prolongada en el tiempo y las inmediaciones de la laguna de efluentes, presentaron un alto contenido de sales. En ambos casos la salinidad estuvo asociada con alto contenido de nitratos, fósforo y sulfatos provenientes de los efluentes ganaderos.Groundwater quality at dairies, used for animal consumption, may have incidence on milk quality, for which it is important to know the effect of wastes lixiviation on soil and groundwater. The aim was to detect anomalies of electrical conductivity at non saturated and saturated zone, by means of electrical resistivity tomography, at potentially contaminated sites at two dairies at Venado Tuerto (Santa Fe Province, Argentina and at Carmen de Areco (Buenos Aires Province, Argentina, and its relationship with physico-chemical properties of soil and groundwater. In Carmen de Areco, a silty laomy soil with clay horizon (Bt, the most

Supervisory control system based on PC applied to substations automatization of and to regional operation centers of distribution networks; Sistema de control supervisorio basado en PC aplicado en automatizacion de subestaciones y centros de operacion regional de redes de distribucion

Energy Technology Data Exchange (ETDEWEB)

Picasso B, Cuitlahuac [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico); Astorga Q, Clemente [Luz y Fuerza del Centro (Mexico)

2003-07-01

In order to increase the services quality in the electrical energy, to improve the process of identification of energy losses, to increase the equipment efficiency, to count on more complete statistics of profiles of load consumptions, among other applications, the Compania de Luz y Fuerza del Centro (LyFC) carries out the modernization in automatization of substations and regional operation centers of distribution networks. The technological base to make these programs requires automating the operative schemes of the substation and distribution centers that supervise the events of the electrical process. In this article the main results of the development and integration of master stations based on PC, that were made in the Instituto de Investigaciones Electricas (IIE) and that have been integrated in the electrical company LyFC are presented. [Spanish] Con el proposito de incrementar la calidad de los servicios en la energia electrica, mejorar el proceso de identificacion de perdidas de energia, aumentar la eficiencia de los equipos, contar con estadisticas mas completas de perfiles de consumos de carga, entre otras aplicaciones, la Compania de Luz y Fuerza del Centro (LyFC) lleva a cabo la modernizacion en automatizacion de subestaciones y centros de operacion regional de redes electricas de distribucion. La base tecnologica para realizar estos programas, requiere de automatizar los esquemas operativos de la subestacion y centros de distribucion que supervisan los eventos del proceso electrico. En este articulo se presentan los principales resultados del desarrollo e integracion de estaciones maestras basadas en PC, que se realizaron en el Instituto de Investigaciones Electricas (IIE) y que se han integrado en la compania electrica LyFC.

Online monitoring of accessories for underground electrical installations through acoustics emissions; Monitoreo en linea de accesorios de instalaciones electricas subterraneas mediante emisiones acusticas

Energy Technology Data Exchange (ETDEWEB)

Casals-Torrens, P. [Universidad Politecnica de Cataluna, Barcelona (Espana)]. E-mail: p.casals@upc.edu; Gonzalez-Parada, A. [Universidad de Guanajuato, Guanajuato (Mexico)]. E-mail: gonzaleza@salamanca.ugto.mx; Bosch-Tous, R. [Universidad Politecnica de Cataluna, Barcelona (Espana)

2012-04-15

The acoustic waves caused by Partial Discharges inside the dielectric materials, can be detected by acoustic emission (AE) sensors and analyzed in the time domain. The experimental results presented, show the online detection capability of these sensors in the environment near a cable accessory, such as a splice or terminal. The AE sensors are immune to electromagnetic interference and constitute a detection method non-intrusive and non-destructive, which ensures a galvanic decoupling with respect to electric networks, this technique of partial discharge detection can be applied as a test method for preventive or predictive maintenance (condition-based maintenance) to equipment or facilities of medium and high voltage in service and represents an alternative method to electrical detection systems, conventional or not, that continue to rely on the detection of current pulses. This paper presents characterization tests of the sensors AE through comparative tests of partial discharge on accessories for underground power cables. [Spanish] Las ondas acusticas provocadas por las descargas parciales en el interior de un dielectrico pueden ser detectadas por sensores de Emisiones Acusticas (EA) y analizadas en el dominio del tiempo. Los resultados experimentales que se presentan, evidencian la capacidad de deteccion en linea de estos sensores, en el entorno proximo a un accesorio de cable, empalme o terminal. Los sensores EA son inmunes a las interferencias electromagneticas, son un metodo de deteccion no destructivo y garantizan desacople galvanico respecto a la red electrica; esta tecnica de deteccion de descargas parciales puede ser aplicada como metodo de prueba para mantenimiento preventivo o predictivo (mantenimiento basado en la condicion), en equipos o instalaciones de media y alta tension en servicio, y representa una alternativa a los sistemas electricos de deteccion, convencionales o no, que continuan basandose en la deteccion del impulsos de corriente. En el

IIE Bulletin: selected articles from 1998 issues of `Boletin iie`; Articulos selecccionados del Boletin iie

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas in Mexico, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the ETDE Energy database. [Espanol] El Boletin IIE es producido en Mexico por el Instituto de Investigaciones Electricas. Este se publica 6 veces al ano. Se han preparado citas y resumenes para articulos individuales dentro del alcance de la base de datos Energy del ETDE.

IIE Bulletin: selected articles from 1998 issues of `Boletin iie`; Articulos selecccionados del Boletin iie

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas in Mexico, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the ETDE Energy database. [Espanol] El Boletin IIE es producido en Mexico por el Instituto de Investigaciones Electricas. Este se publica 6 veces al ano. Se han preparado citas y resumenes para articulos individuales dentro del alcance de la base de datos Energy del ETDE.

Twelve years of continuous measurements of atmospheric electrical activity in Mexico's Tropical highland

Energy Technology Data Exchange (ETDEWEB)

Troncoso Lozada, O. [Centro de Ciencias de la Atmosfera, Universidad Nacional Autonoma de Mexico (UNAM), Mexico, D.F. (Mexico)

2004-04-01

Atmospheric electric activity measurements have been recorded continuously by a punctual lightning system at a tropical highland observatory from 1988 onwards, and were analyzed to obtain lightning statistical confident results for thunderstorms occurrence on the leeward side of the southern mountain ridge of Mexico's Valley. Shown, as examples, are individual profiles of the atmospheric electrical activity, associated with severe storms. The results make clear that the fastest possible sequence of electrical measurements is required to obtain significant and applications oriented data in connection with a whole series of thunderstorms taking into account the mean time variation of the atmospheric electricity measurements at an altitude of 2270 m a.s.l. The seasonal variation indicates that the lightning flash peak currents were found to be larger in summer with less than 10% occurring in the autumn and winter. With rainfall data from a network of 66 stations, we obtained a significant correlation with the lightning frequency. Special attention was undertaken concerning the question of the atmospheric electrical activity and climate at Valley of Mexico. [Spanish] Se midieron ininterrumpidamente las variaciones de la actividad electrica en la atmosfera, de enero de 1988 a diciembre de 1999, en un observatorio de altura (2,250 m s.n.m.), y se analizaron para obtener resultados estadisticos confiables con relacion a la ocurrencia de tormentas en la region sur del Valle de Mexico. Como ejemplos, se muestran los perfiles individuales de la actividad electrica atmosferica asociada con tormentas severas. Los resultados dejan claro que se requiere de la secuencia de medidas electricas lo mas rapida posible para obtener datos significativos y aplicables en relacion con una serie completa de tormentas, considerando la media del tiempo de variacion de las mediciones de la actividad electrica atmosferica a una altitud de 2,270 m s.n.m. La validacion estacional indica que

DTN and international cooperation of the Spanish Nuclear Sector in nuclear technology development processes

International Nuclear Information System (INIS)

Acero, M.

1995-01-01

The Spanish electrical utilities with interests in the Nuclear Sector-IBERDROLA, ENDESA,FUERZAS ELECTRICAS DE CATALU=A5A (FECSA), UNION ELECTRICA FENOSA S.A., COMPA=A5IA SEVILLANA DE ELECTRICIDAD S.A., AND HIDROELECTRICA DEL CANTABRICO S.A.-created on September 26, 1994 the ''Agrupacion Electrica para el Desarrollo Tecnologico Nuclear, A.I.E. (DTN)'' (Electrical Society for Nuclear technology Development A.I.E.) for the purpose of promoting and managing Nuclear Nechnology Development, and integrating and coordinating the efforts of the Nuclear Electrical Sector with industrial companies and other related institutions in spain and abroad. This mission is primarily accomplished by establinhing a common strategy for the Nuclear Electrical Sector in the different areas of responsibility of DTN, centralizing actions by implementing a clear and coherent policy, and ensuring the presence of the entire Electrical Sector in all those fora deemed to be strategic to the Nuclear Sector

Apparent resistivity and spectral induced polarization in the submarine environment

Directory of Open Access Journals (Sweden)

HERCULES DE SOUZA

2001-09-01

Full Text Available Relatively few investigations have employed electrical methods in the submarine environment, which may be promising for mineral deposits or threatened by environmental problems. We have measured the electric field using both disk and bar electrodes in the sea water at three different levels: sea surface, seven meters deep, and sea bottom at a depth of ten meters, employing a 2 m spacing dipole-dipole array with 7 array spacings of investigation, and 13 values of frequencies at steps of (2N hertz, N = -2, -1, 0, 1, 2,.....10. The measurement allowed the analysis of the electric field as a function of frequency and spacing, and of the spectral induced polarization. Modelling and interpretation of the apparent resistivity yielded a good fit with previous drilling data. Analysis of the spectrum of the complex apparent resistivity and the comparison with equivalent circuits, provided information about the grain size, the mineral composition and the major induced polarization phenomenon occurring below the sea. Therefore the result of the present research show the feasibility of measuring the variation of seawater resistivity in situ, as well as the resistivity of sea bottom sediments.Relativamente poucas investigações têm empregado métodos elétricos no ambiente submarino, o qual pode ser promissor para depósitos minerais ou ameaçado por problemas ambientais. Nós medimos o campo elétrico usando eletrodos em forma de disco e de barra na água do mar, em três níveis distintos: superfície, sete metros de profundidade, e fundo do mar a dez metros de profundidade, empregando um dispositivo dipolo-dipolo com 2m de afastamento, 7 níveis de investigação e 13 valores de freqüência a intervalos de (2N hertz, N = -2, -1, 0, 1, 2, ... 10. A medida permitiu a análise do campo elétrico como uma função de freqüência e afastamento, e da polarização induzida espectral. A modelagem e a interpretação da resistividade aparente se ajustaram bem

Hybrid system of generating electricity, solar eolic diesel San Juanico, Baja California Sur, Mexico; Sistema hibrido de generacion electrica, eolico solar diesel San Juanico, Baja California Sur, Mexico

Energy Technology Data Exchange (ETDEWEB)

Huerta, Javier [Comision Federal de Electricidad, La Paz, Baja California Sur (Mexico); Johnston, Peter [Technology Development, Arizona (United States); Napikoski, Chester [Generation Engineering, Arizona (United States); Escutia, Ricardo [Comision Federal de Electricidad, Baja California Sur (Mexico)

2000-07-01

is generated thru the selling of electric energy, guarantees the sustainable operation of the system. [Spanish] La Comision Federal de Electricidad (CFE), y la empresa electrica norteamericana Arizona Public Service (APS), firmaron un convenio de colaboracion para desarrollar un proyecto de generacion de energia electrica con la utilizacion de energias renovables. Las premisas que se acordaron fueron las siguientes: 1. Enfoque del proyecto hacia una comunidad rural. 2. El costo de la obra debera ser menor al de su interconexion con el sistema convencional. 3. Aceptacion por parte de la comunidad, y autoridades gubernamentales. 4. Sustentabilidad de la operacion del sistema. Se efectuaron diversos analisis tecnicos y economicos asi como la evaluacion del recurso solar y eolico, estudio de impacto ambiental, plan de negocios para obtener la aprobacion de los recursos economicos ante instancias como Niagara Mohawk (NIMO), y la USAID, mediante la supervision de los Laboratorios Nacionales de Sandia. Despues de efectuarse las mediciones anemometricas y de radiacion solar, en diversas comunidades, se considero a la comunidad de San Juanico como la mas viable; tambien los aspectos de logistica, sociales, tamano de la comunidad y como detonador para las actividades economicas como la pesca y el turismo. La APS llevo a cabo el proyecto ejecutivo de conformidad con las recomendaciones de la Comision Federal de Electricidad. El proyecto consistio basicamente en la instalacion de 10 aerogeneradores de 10 Kw. c/u, un arreglo solar de 17 Kw., un inversor de 70 Kw., un banco de baterias de 432 Kwh., mas un motogenerador diesel de emergencia de 80 Kw. Ademas de la obra civil y electromecanica. Fue necesario involucrar a la poblacion en el conocimiento y seguimiento del proyecto desde sus inicios, ya que consideramos que este factor seria indispensable para lograr el exito del mismo. Se instalaron lamparas ahorradoras de energia en viviendas y alumbrado publico para optimizar el

Journal of Earth System Science | Indian Academy of Sciences

Indian Academy of Sciences (India)

Author Affiliations. Amar Agarwal1 K K K K Agarwal2 R Bali2 Chandra Prakash2 Gaurav Joshi2. Laboratorio de Paleomagnetismo, Instituto de Geofisica, UNAM, Mexico City, Mexico. Centre of Advanced Study in Geology, University of Lucknow, Lucknow, India.

Preparo de nanocompósitos de maghemita e polianilina assistido por ultrassom

Directory of Open Access Journals (Sweden)

Renata Cerruti da Costa

2014-01-01

Full Text Available O estudo de sistemas envolvendo nanopartículas de óxido de ferro e polianilina vem ganhando importância nos últimos anos. Entre esses trabalhos, ainda há um pequeno número de pesquisas que abordam o efeito da sonicação sobre o preparo desses híbridos. Assim, o presente trabalho teve como objetivo avaliar o efeito da sonicação sobre as propriedades de nanopartículas de maghemita revestidas com polianilina, via planejamento fatorial. Os materiais obtidos foram estudados por espectroscopia no infravermelho, difração de raios X e por análise termogravimétrica. As amostras também tiveram a resistividade elétrica e a força magnética investigadas. Os resultados obtidos demonstram que o aumento da potência de sonicação é capaz de produzir um considerável aumento da extensão do grau de dopagem, associado com a diminuição da resistividade das amostras. Por outro lado, a mesma potência de sonicação produziu a destruição de grande parte da maghemita presente, levando a menores forças magnéticas.

Resistividade do filme depositado via sol-gel e estado de oxidação do dopante Ce na matriz SnO2 Resistivity of the film deposited via sol-gel and oxidation state of Ce doping in SnO2 matrix

Directory of Open Access Journals (Sweden)

L. V. A. Scalvi

2011-06-01

Full Text Available Incorporação de Ce3+ ou Ce4+ em filmes finos de SnO2 depositados via sol-gel-dip-coating aumenta drasticamente a resistividade elétrica. No primeiro caso, temos comportamento aceitador do dopante, levando a matriz à alta compensação de carga. Por outro lado, para Ce4+, verifica-se aumento na largura da região de depleção do contorno de grão, resultando em maior espalhamento de elétrons. Medidas de caracterização elétrica sob pressão ambiente levam à barreiras de potencial mais altas do que as medidas sob vácuo, devido a adsorção de oxigênio na superfície das partículas. A presença de Ce3+ aumenta a transmitância no infravermelho, o que significa menor quantidade de elétrons livres. Dados de XANES confirmam que o tratamento térmico a 550 ºC dos filmes, ainda que promova oxidação parcial para Ce4+, preserva uma quantidade significativa (em torno de 60% no estado Ce3+. Espectroscopia Raman mostra a evolução dos modos de vibração intra-grãos de SnO2 com o aumento da temperatura de tratamento térmico.Incorporation of Ce3+ or Ce4+ in sol-gel dip-coating SnO2 thin films increases drastically its electrical resistivity. In the first case, it is due the acceptor-like nature of the doping ion, leading the matrix to high charge compensation. On the other hand, for Ce+4 doped samples, it is verified a broadening of the grain boundary depletion layer. Measurements under room pressure leads to higher intergrain potential barriers when compared to measurements carried out under vacuum conditions, due to oxygen adsorption at particles surface. The presence of Ce3+ increases the infrared transmittance, which means a lower free electron concentration. XANES data confirms that the thermal annealing at 550 ºC of thin films, although promotes oxidation to Ce4+, still keeps a significantly amount (about 60% of ions in the oxidation state Ce3+. Raman spectroscopy data show the evolution of the SnO2 bulk vibration modes with

End uses of electric energy in homes of a group of dwellings; Usos finales de la energia electrica en hogares de un conjunto habitacional

Energy Technology Data Exchange (ETDEWEB)

Campero Littlewood, E.; Romero Cortes, J.; Alarcon Maldonado, E.; Silva Oliver, J.; Ortiz Segura, J.; Vargas Rubio, J. [Departamento de Energia, Universidad Autonoma Metropolitana - Unidad Azcapotzalco, Mexico, D. F. (Mexico)

1997-12-31

). El analisis de la informacion permite conocer la capacidad de consumo de energia electrica que tienen las viviendas de la muestra y a hacer inferencias de la capacidad de consumo de la unidad habitacional.

End uses of electric energy in homes of a group of dwellings; Usos finales de la energia electrica en hogares de un conjunto habitacional

Energy Technology Data Exchange (ETDEWEB)

Campero Littlewood, E; Romero Cortes, J; Alarcon Maldonado, E; Silva Oliver, J; Ortiz Segura, J; Vargas Rubio, J [Departamento de Energia, Universidad Autonoma Metropolitana - Unidad Azcapotzalco, Mexico, D. F. (Mexico)

1998-12-31

). El analisis de la informacion permite conocer la capacidad de consumo de energia electrica que tienen las viviendas de la muestra y a hacer inferencias de la capacidad de consumo de la unidad habitacional.

Energy saving in the pumping of drinking water, Municipality of San Felipe, Guanajuato; Ahorro de energia electrica en bombeo de agua potable, en el municipio de San Felipe, Gto.

Energy Technology Data Exchange (ETDEWEB)

Gamiz Sanchez, Lorenzo [Applied Technology Center de Mexico, S.A. de C.V. (Mexico)

2006-01-15

This paper shows the results attained in energy saving through a project of potable water pumping, which took an investment of $433,043.00 and an internal rate of return of 126%. This project puts into evidence that it is possible to reduce between 15 and 30% of the total invoicing for energy consumption in potable water pumping if an equipment of poor efficiency is replaced by another of high efficiency. The project was requested by the Guanajuato's State Water Comision and the Municipal Bureau of Sewage and Potable Water, with the double intention of reducing the energy consumption along with the corresponding invoicing and incrementing the output of the wells in order to improve the potable water supply. In the site two high efficiency submersible motor-pumps were installed previously to the energy diagnosis that triggered profitable operation results and a convenient invoicing. [Spanish] Se documentan los resultados obtenidos en un proyecto de ahorro de energia en el bombeo de agua potable realizado con una inversion de $433,043.00 y con una tasa interna de retorno de 126%. Este proyecto pone en evidencia que es posible reducir entre el 15 y 30% de la facturacion total por consumo de energia electrica en el bombeo de agua potable si se sustituye un equipo poco eficiente por otro de alta eficiencia. El proyecto fue solicitado por la Comision Estatal del Agua de Guanajuato y la Junta Municipal de Agua Potable y Alcantarillado del municipio, con un doble proposito, reducir el consumo de energia junto con la facturacion correspondiente e incrementar la capacidad de produccion de los pozos con la intencion de mejorar el abasto de agua potable. En el lugar se instalaron dos motobombas sumergibles de alta eficiencia previo diagnostico energetico que desencadenaron rentables resultados operativos y de facturacion.

Impact of a PV system interconnected to the electric network of a High Consumption Domestic user's demand in BCS; Impacto de un sistema fotovoltaico interconectado a red en la demanda electrica de un usuario DAC en BCS

Energy Technology Data Exchange (ETDEWEB)

Jimenez Grajales, H. R.; Agredano Diaz, Jaime; Gonzalez Galarza, R.; Munguia del Rio, G. [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2010-11-15

In Mexico, the incident solar radiation is high enough, that encourage its use both to produce process heat or electricity trough solar cells in autonomous configurations or grid. In European countries with substantially lower irradiation levels such as Germany or Spain. PV Grid Connected Systems (PVGCS) are a mature technology that is widely used in these countries, mainly due to tax incentives and preferential feed in tariffs schemes. Of the benefits that electricity production modality provides both the user and to the electricity grid and also the technical benefits for the utilities for incorporating distributed generation at its distribution system. In Mexico, more and more people are motivated to invest in this type of technology. This article analyzes the particular case of a user that is classified as High Consumption Domestic Customer (HCDC) in the city of La Paz, Baja California Sur, Mexico, who owns a single phase of 6 kWp PVGCS installed on the roof of her house. The reported results in this paper come from data analyzed by the Electrical Research Institute (IIE) for a three year monitoring period. The paper includes meteorological information, energy and power balances, maximum power, standard production, system losses, efficiency of the photovoltaic generator and inverters, among other performance information. The document highlights the impact that the PV system on electricity consumption user billing from the utility, and some recommendations are provided on what must be done in order get out from the HCDC classification and the economic benefits of it. [Spanish] En Mexico se tienen niveles de irradiacion solar suficientemente altos que desde un punto de vista puramente energetico alientan a su aprovechamiento en la produccion de electricidad, ello mediante sistemas fotovoltaicos directamente conectados a la red electrica convencional (SFVI). En paises europeos con niveles de irradiacion sustancialmente inferiores - i.e. Espana o Alemania- esta

Meteorological Factors Affecting Evaporation Duct Height Climatologies.

Science.gov (United States)

1980-07-01

Italy Maritime Meteorology Division Japan Meteorological Agency Ote-Machi 1-3-4 Chiyoda-Ku Tokyo, Japan Instituto De Geofisica U.N.A.M. Biblioteca ...Torre De Ciencias, 3ER Piso Ciudad Universitaria Mexico 20, D.F. Koninklijk Nederlands Meteorologisch Instituu. Postbus 201 3730 AE Debilt Netherlands

Residual magnetic field in rotary machines; Campo magnetico residual en maquinas rotatorias

Energy Technology Data Exchange (ETDEWEB)

Gonzalez V, Esteban A; Apanco R, Marcelino [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2007-07-01

The residual magnetism is a phenomenon in which the magnetic dipoles of a substance are oriented in a certain degree. On the other hand, when internal forces exist capable of aligning elementary magnetic dipoles of a material, a permanent magnet is obtained. Just as in a conductor or in a material, in the elements of a rotary electrical machine magnetic fields can be induced that produce a residual magnetism or magnetization. In the rotary electrical machines, the magnetization phenomenon causes serious problems, such as the generation of induced currents that propitiate the mechanical wear in bearings, collars, trunnions and inclusive in the shaft, by effects known as pitting, frosting and spark tracks, as well as erroneous readings in vibration and temperature sensors, that in some cases can cause the shut down of the machine. In this article are presented the general concepts on the residual magnetism in rotary electrical machines, the causes that originate it and the problems that arises, as well as the demagnetization of the components that have residual magnetic field. The results obtained by the area of Electrical Equipment of the Instituto de Investigaciones Electricas are revised, during the execution of activities related to the measurement and elimination of the residual magnetic field in rotary electrical machines. [Spanish] El magnetismo residual es un fenomeno en el que los dipolos magneticos de una sustancia se encuentran orientados en un grado determinado. Por otro lado, cuando existen fuerzas internas capaces de alinear los dipolos magneticos elementales de un material, se tiene un iman permanente. Al igual que en un conductor o un material, en los elementos de una maquina electrica rotatoria se pueden inducir campos magneticos que producen un magnetismo residual o magnetizacion. En las maquinas electricas rotatorias, el fenomeno de magnetizacion causa graves problemas, como la generacion de corrientes inducidas que propician el desgaste mecanico

Hybrid system of generating electricity, solar eolic diesel San Juanico, Baja California Sur, Mexico; Sistema hibrido de generacion electrica, eolico solar diesel San Juanico, Baja California Sur, Mexico

Energy Technology Data Exchange (ETDEWEB)

Huerta, Javier [Comision Federal de Electricidad, La Paz, Baja California Sur (Mexico); Johnston, Peter [Technology Development, Arizona (United States); Napikoski, Chester [Generation Engineering, Arizona (United States); Escutia, Ricardo [Comision Federal de Electricidad, Baja California Sur (Mexico)

2000-07-01

that is generated thru the selling of electric energy, guarantees the sustainable operation of the system. [Spanish] La Comision Federal de Electricidad (CFE), y la empresa electrica norteamericana Arizona Public Service (APS), firmaron un convenio de colaboracion para desarrollar un proyecto de generacion de energia electrica con la utilizacion de energias renovables. Las premisas que se acordaron fueron las siguientes: 1. Enfoque del proyecto hacia una comunidad rural. 2. El costo de la obra debera ser menor al de su interconexion con el sistema convencional. 3. Aceptacion por parte de la comunidad, y autoridades gubernamentales. 4. Sustentabilidad de la operacion del sistema. Se efectuaron diversos analisis tecnicos y economicos asi como la evaluacion del recurso solar y eolico, estudio de impacto ambiental, plan de negocios para obtener la aprobacion de los recursos economicos ante instancias como Niagara Mohawk (NIMO), y la USAID, mediante la supervision de los Laboratorios Nacionales de Sandia. Despues de efectuarse las mediciones anemometricas y de radiacion solar, en diversas comunidades, se considero a la comunidad de San Juanico como la mas viable; tambien los aspectos de logistica, sociales, tamano de la comunidad y como detonador para las actividades economicas como la pesca y el turismo. La APS llevo a cabo el proyecto ejecutivo de conformidad con las recomendaciones de la Comision Federal de Electricidad. El proyecto consistio basicamente en la instalacion de 10 aerogeneradores de 10 Kw. c/u, un arreglo solar de 17 Kw., un inversor de 70 Kw., un banco de baterias de 432 Kwh., mas un motogenerador diesel de emergencia de 80 Kw. Ademas de la obra civil y electromecanica. Fue necesario involucrar a la poblacion en el conocimiento y seguimiento del proyecto desde sus inicios, ya que consideramos que este factor seria indispensable para lograr el exito del mismo. Se instalaron lamparas ahorradoras de energia en viviendas y alumbrado publico para optimizar el

Tropical Cyclone Wind Probability Forecasting for the Eastern North Pacific (EPWINDP).

Science.gov (United States)

1982-04-01

INSTITUTO DE GEOFISICA DIRECTOR HONOLULU, HI 96822 U.N.A.M. BIBLIOTECA NATIONAL HURRICANE CENTER TORRE DE CIENCIAS, 3ER PISO NOAA, GABLES ONE TOWER CHAIRMAN...METEOROLOGY DEPT. CIUDAD UNIVERSITARIA 1320 S. DIXIE HWY. UNIVERSITY OF WISCONSIN MEXICO 20, D.F. CORAL GABLES, FL 33146 1225 W. DAYTON STREET

Out-of-phase susceptibility and viscous magnetization: alternative tools for magnetic granulometry of sediments and soils

Czech Academy of Sciences Publication Activity Database

Chadima, Martin

2016-01-01

Roč. 6, Special issue (2016) ISSN 2007-9656. [Biennial Meeting Latinmag /4./. 23.11.2015-27.11.2015, Sao Paulo] Institutional support: RVO:67985831 Keywords : palaeomagnetism * sediments * soils Subject RIV: DE - Earth Magnetism, Geodesy, Geography http://www. geofisica .unam.mx/LatinmagLetters/LL16-01-SP/D/D07.pdf

Technological tendencies and their relation with energy markets; Tendencias tecnologicas y su relacion con mercados de energia

Energy Technology Data Exchange (ETDEWEB)

Gonzalez Castro, Salvador [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

1999-07-01

In this article some associate technological tendencies with areas of interest of the Control Systems Division of the Instituto de Investigaciones Electricas (IIE) are presented. Here the relations or influence that these tendencies have and will continue having in the future with the definition and implantation of energy markets are mentioned. [Spanish] En este articulo se presentan algunas tendencias tecnologicas asociadas con areas de interes de la Division de Sistemas de Control del Instituto de Investigaciones Electricas (IIE). Aqui se mencionan las relaciones o influencia que dichas tendencias tienen y continuaran teniendo en el futuro con la definicion e implantacion de mercados de energia.

Experimental analysis of the environmental contamination of electrical equipment; Analisis experimental de la contaminacion ambiental en equipos electricos

Energy Technology Data Exchange (ETDEWEB)

Campillo Ruiz, Maria Teresa; Ponce Velez, Marco Antonio [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1996-12-31

This paper is a summary of the main causes that originate the contamination problems in insulating materials. This as the result of different studies performed in experimental testing stations, as well as in transmission, distribution and laboratory power lines by the Departamento de Materiales of the Instituto de Investigaciones Electricas (IIE). [Espanol] En el presente trabajo se muestra un resumen de los principales factores que originan los problemas de contaminacion en aislamientos. Esto, como resultado de diversos estudios realizados tanto en estaciones de prueba experimentales como en lineas de transmision, distribucion y laboratorio por el Departamento de Materiales del Instituto de Investigaciones Electricas (IIE).

Experimental analysis of the environmental contamination of electrical equipment; Analisis experimental de la contaminacion ambiental en equipos electricos

Energy Technology Data Exchange (ETDEWEB)

Campillo Ruiz, Maria Teresa; Ponce Velez, Marco Antonio [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1997-12-31

This paper is a summary of the main causes that originate the contamination problems in insulating materials. This as the result of different studies performed in experimental testing stations, as well as in transmission, distribution and laboratory power lines by the Departamento de Materiales of the Instituto de Investigaciones Electricas (IIE). [Espanol] En el presente trabajo se muestra un resumen de los principales factores que originan los problemas de contaminacion en aislamientos. Esto, como resultado de diversos estudios realizados tanto en estaciones de prueba experimentales como en lineas de transmision, distribucion y laboratorio por el Departamento de Materiales del Instituto de Investigaciones Electricas (IIE).

Protection of structures and buildings against the effect of electrical storms: basic concepts, evolution and application in Mexico; Proteccion contra el efecto de las tormentas electricas de estructuras y edificios: conceptos basicos, evolucion y aplicacion en Mexico

Energy Technology Data Exchange (ETDEWEB)

Galvan Diego, Arturo; Velazquez Sanchez, Raul [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2001-07-01

observacion cientifica, ha demostrado su eficacia en la modernizacion de cientos de procesos industriales, comerciales, de comunicacion y de servicios, asi como de los materiales y metodologias utilizadas para la proteccion de diversos equipos y procesos; desde la proteccion en sistema y equipos en alta tension hasta sistemas que manejan muy baja energia, entre los que incluyen electronicos y digitales. Sin embargo, existen leyes fundamentales como la ley de Ohm, la ley de gravedad o la ley universal de gases que, pese a que fueron descubiertos hace muchos anos, siguen vigentes y su validez proporciona elementos invaluables para el desarrollo de nuevos metodos, procesos y desarrollos tecnologicos. Uno de los casos mas relevantes que amalgama la aplicacion de criterios fundamentales y el desarrollo de nuevas tecnologias y su aplicacion en los llamados dispositivos de proteccion no convencionales lo constituye la proteccion contra el efecto de las tormentas electricas en edificios y estructuras. La aplicacion de estos dispositivos en el ambito mundial ha generado escepticismo de una gran parte de la comunidad cientifica, reacciones diversas entre los usuarios y un postura firme por parte de los fabricantes para que dichas tecnologias sean incluidas en normas internacionales. El objetivo de este articulo es ofrecer al lector la informacion basica sobre los inicios de la proteccion, la evolucion que los metodos de proteccion contra las tormentas electricas han tenido desde el siglo XVIII, la aplicacion de los criterios fundamentales de proteccion en estructuras o edificios modernos y su contenido, asi como la situacion que prevalece actualmente en los comites de las diversas organizaciones normativas nacionales e internacionales en lo referente a la inclusion de las nuevas tecnologias en las guias de diseno.

Control voltage of the generator of auto-excited induction for applications on micro/mini generation o electric power; Control de voltaje del generador de induccion auto-excitado para aplicaciones de micro/mini generacion de energia electrica

Energy Technology Data Exchange (ETDEWEB)

Torres Montalvo, Emmanuel

2006-09-15

literature, since in this one it is only mentioned that the dynamics of the voltage and frequency change, but it is not shown how. In base of the dynamic behavior of the GIAE a scheme of simple control is proposed to regulate the generator voltage with the minimum of necessary elements, which is translated into a reduced cost, greater reliability and in addition provides a satisfactory voltage regulation. The control strategy is simple but functional, which permits its implementation without major complications. Finally an analysis is realized of the harmonic distortion produced by the proposed control. [Spanish] Aunque solamente una parte de la potencia mini/micro hidraulica ha sido explorada en nuestro pais, este tipo de generacion de energia electrica puede ser considerada como una forma viable de generacion de electricidad, principalmente por lo que respecta a los aspectos ecologicos, economicos y sociales. El impacto que pueden tener estas plantas en las regiones en las que son instaladas es siempre positivo: reduccion de costo de la energia, derrama economica, y principalmente un bienestar social. La energia electrica es uno de los pilares para el desarrollo economico de un pais y proporciona una mejor calidad de vida. En la actualidad la investigacion y la tecnologia orientada a la operacion y control de las micro/mini plantas de generacion ha despertado el interes de muchos investigadores en diversos paises del mundo como China, la India, Canada, USA, por mencionar algunos. El generador de induccion juega un papel crucial en la utilizacion de estas tecnologias. El trabajo de Basset y Potter en 1935, es la piedra angular sobre la posibilidad de generar energia haciendo uso de la maquina de induccion y un banco de capacitores conectado a las terminales de la maquina. Esta configuracion se conoce como generador de induccion auto-excitado (GIAE). Se han realizado diversas investigaciones que tratan sobre el principio de funcionamiento y el comportamiento dinamico de un

Importance of the planning activities, cutting, handling and analysis of the nuclei of oil well drilling; Importancia de las actividades de planificacion, corte, manejo y analisis de los nucleos de perforacion de pozos petroleros

Energy Technology Data Exchange (ETDEWEB)

Contreras L, Enrique A; Garcia M, Pablo [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2007-07-01

, recipientes de almacenamiento de hidrocarburos, agua y energia calorifica, asi como barreras impermeables y medios de transporte de la energia y de los fluidos. Entre las propiedades mas importantes que se utilizan para describir estas funciones se encuentran la porosidad, la permeabilidad, la compresibilidad del volumen de poros, el factor de resistividad de la formacion, el exponente de saturacion, la velocidad de las ondas acusticas P y S, las permeabilidades relativas, las presiones capilares, las constantes elasticas y otras propiedades mecanicas, el coeficiente de dilatacion termica, la conductividad termica, la difusividad termica y el calor especifico. La ejecucion de una amplia variedad de actividades relacionadas con las etapas de exploracion, localizacion, evaluacion y desarrollo de los yacimientos petroleros, depende fuertemente de que se tenga un buen conocimiento de la magnitud y de la variabilidad espacial de estas propiedades. Tanto la factibilidad tecnica como la economica de desarrollar un prospecto de yacimiento petrolero, dependen de que las rocas que intervienen exhiban una combinacion adecuada de sus propiedades, para asi constituir una estructura geologica confinante y almacenadora de hidrocarburos, que sea factible de desarrollarse tecnicamente, a la vez que tenga el potencial de redituar un beneficio economico. En este contexto, desde la plataforma de experiencia que se tiene sobre el tema en el Laboratorio de Yacimientos del Instituto de Investigaciones Electricas. En el presente articulo se aborda la relevancia que tienen las actividades de corte, manejo y analisis de laboratorio de los nucleos de perforacion de pozos petroleros, para la evaluacion de las formaciones geologicas, en relacion con la caracterizacion, la evaluacion y el aprovechamiento de los yacimientos petroleros.

Guidance for DoD Utilization of Host Nation Power

Science.gov (United States)

2015-10-28

data)  The Honduran electric company,  Empresa  Nacional  de  Energia Electrica (ENEE) generates power and  operates the national transmission and...CDF  Cumulative Distribution Function  DoD  Department of Defense  ENEE  Empresa  Nacional  de  Energia Electrica  EUPW  Escalating Uniform Present Worth...generators with the fuel either purchased from the local  population or  transported  from remote fuel depots.  This incurs a significant cost for the

Effect of paint on vapour resistivity in plaster

Directory of Open Access Journals (Sweden)

de Villanueva, L.

2008-12-01

Full Text Available The vapour resistivity of plaster coatings such as paint and their effectiveness as water repellents were studied in several types of plaster. To this end, painted, unpainted and pigmented specimens were tested. Experimental values were collected on diffusion and vapour permeability, or its inverse, water vapour resistivity.The data obtained were very useful for evaluating moisture exchange between plaster and the surrounding air, both during initial drying and throughout the life of the material. They likewise served as a basis for ensuring the proper evacuation of water vapour in walls, and use of the capacity of the porous network in plaster products to regulate moisture content or serve as a water vapour barrier to avoid condensation.Briefly, the research showed that pigments, water-based paints and silicon-based water repellents scantly raised vapour resistance. Plastic paints, enamels and lacquers, however, respectively induced five-, ten- and twenty-fold increases in vapour resistivity, on average.Se estudia el fenómeno de la resistividad al vapor de los de yeso y el efecto impermeabilizante que producen los recubrimientos de pintura sobre diversos tipos de yeso y escayola. Para ello, se ensayan probetas desnudas y recubiertas con distintos tipos de pintura, así como coloreados en masa. Se obtienen valores experimentales de la difusividad o permeabilidad al vapor o su inverso la resistividad al vapor de agua.Los datos obtenidos son muy útiles para valorar el fenómeno del intercambio de humedad entre el yeso y el ambiente, tanto durante el proceso de su secado inicial, como en el transcurso de su vida. Así como para disponer soluciones adecuadas para la evacuación del vapor de agua a través de los cerramientos, para utilizar la capacidad de regulación de la humedad, que proporciona el entramado poroso de los productos de yeso, o para impedir el paso del vapor de agua y evitar condensaciones.Como resumen de la investigación, se

Modelación del problema inverso en geoeléctrica 2D mediante elementos finitos

Directory of Open Access Journals (Sweden)

Briseño Luis Alberto

2001-08-01

Full Text Available

A numerical model for the solution of the inverse problem in geoelectric 2D is proposed using the method of the finite elements. The solution methodology is based mainly on two procedures: a to solve numerically the fundamental equation of current flow for established values of resistivity to calculate its electrical answer (apparent resistivities calculated, b to diminish the difference between apparent resistivities measures and the calculated ones using an investment model. The method is iterative. For the first cycle, a model of blocks or parameters settles down homogenous, that successively will be modified by the investment process, trying that the quadratic minimum error is smaller to 10%. A computer program is elaborated that serves like calculation tool and graphically represents the obtained results to facilitate the interpretative process. Finally two cases of tomografic sections in the National Park in Bogota D.C. are presented.

On-line monitoring for the detection and prevention of faults in the power transformers; Monitoreo en linea para la deteccion y prevencion de fallas en transformadores de potencia

Energy Technology Data Exchange (ETDEWEB)

Lopez Tagle, Alfredo; Equihua Tapia, Hugo [Comision Federal de Electricidad (Mexico); Linan Garcia, Roberto; Pascacio de los Santos, Alberth; Nunez Dominguez, Arturo [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

2000-07-01

Power transformers are held to thermal, electrical and mechanical efforts, which degrade the isolation system oil/paper. So that to detect incipient degradations in transformers with more than 25 years of service installed in the transmission network of Commission Federal de Electricidad (CFE). The Instituto de Investigaciones Electricas (IIE), developed and installed six on-line Monitoring Systems for Power Transformers (SMLTP). The systems are installed at the substations Puebla II, banks AT-1 and AT-2, Malpaso II, bank, AT-1 and phase B of bank AT-1 of the electrical substation Villa de Garcia. [Spanish] Los transformadores de potencia estan sujetos a esfuerzos termicos, electricos y mecanicos, los cuales degradan el sistema de aislamiento aceite/papel. De modo que con el proposito de detectar degradaciones incipientes en transformadores con mas de 25 anos de servicio instalado en la red de transmision de la Comision Federal de Electricidad (CFE). El Instituto de Investigaciones Electricas (IIE), desarrollo e instalo seis Sistemas de Monitoreo en Linea para Transformadores de Potencia (SMLTP). Los sistemas se encuentran en las subestaciones Puebla II, bancos AT-1 y AT-2, Malpaso II, banco, AT-1 y fase B del banco AT-1 de la subestacion electrica Villa de Garcia.

Code for the steam tables for pure water in visual basic 6.0.; Un codigo para las tablas de vapor para agua pura en visual basic 6.0

Energy Technology Data Exchange (ETDEWEB)

Verma, Mahendra P. [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2002-07-01

The thermodynamic data of the water are of extreme importance in all of the branches of science and technology; the facilitate the understanding of the natural Earth processes. Nevertheless, for the electrical industry the water plays a very important role during the generation of electrical energy process. Different heat sources such as coal, oil, natural gas, nuclear fuel or the geothermal heat boil the water that forms the steam used to move the turbines. Consequently, the steam tables (the thermodynamic water data) are vital to model thermal and mass transference and physical-chemical processes during the generation of electrical energy. [Spanish] Los datos termodinamicos del agua son de suma importancia en todas las ramas de la ciencia y tecnologia, ellos facilitan el entendimiento de los procesos naturales de la Tierra. Sin embargo, para la industria electrica el agua juega un papel muy importante durante el proceso de generacion de energia electrica. Diferentes fuentes de calor tales como carbon, aceite, gas natural, combustible nuclear o el calor geotermico calientan el agua que forma el vapor utilizado para mover las turbinas. Luego entonces, las tablas de vapor (los datos termodinamicos de agua) son vitales para modelar transferencia termica y de masa y procesos fisico-quimico durante la generacion energia electrica.

Methodology to establish the profile that defines a meta-specification that applies to distribution substations - Mexico case based on norm IEC-61850; Metodologia para establecer el perfil que define una meta-especificacion que aplica a subestaciones de distribucion -caso Mexico- basada en la norma IEC-61850

Energy Technology Data Exchange (ETDEWEB)

Picazo Blanquel, Cuitlahuac; Chairez Campos Carlos; Garcia Hernandez, Joaquin; Godinez Enriquez, Hebert; Poujol Galvan, Francisco C.; Suarez Cerda, Dionisio A. [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico); Villalobos Ramos, Andres; LLamas Gonzalez, Rosa E. [Comision Federal de Electricidad (Mexico); Samitier Otero, Carlos [Global Networking Engineering (Spain)

2010-07-01

In this article is presented a case of study of automation of electrical substations of Comision Federal de Electricidad (CFE) of Mexico, in which the Norm IEC-61850 has been taken as reference. The case of study consists of defining a metaspecification for the protection, control, measurement and communication systems required by the substations of electrical distribution. For the development the obtained previous experience in the development of a bequeathed system SA, norm IEC61850 has been taken as reference, as well as the experiences documented in the Instituto de Investigaciones Electricas (IIE), the Comision Federal de Electricidad (CFE) and Global Networking Engineering (GNE), Spain. This way, the obtained result is the metaspecification, which establishes the application of the control, protective equipment and measurement under the interoperability concepts, as well as the automation functions of substations applied in the intelligent networks (REI's). The methodology put into practice includes the design of the system architecture (SAS), the operation philosophy, the topology of the communications network, the data modeling one with logical nodes that include data types and classes of common data (CDC), transference of information, and administration of the archives ICD, SSD, SCD, and CID. [Spanish] En este articulo se presenta un caso de estudio de automatizacion de subestaciones electricas de la Comision Federal de Electricidad (CFE) de Mexico, en el cual se ha tomado como referencia la norma IEC-61850. El caso de estudio consiste en definir una metaespecificacion para los sistemas proteccion, control, medicion y comunicaciones requeridos por las subestaciones de distribucion electrica. Para el desarrollo se ha tomado como referencia la experiencia previa obtenida en el desarrollo de un sistema SA legado, la norma IEC61850, asi como las experiencias documentadas en el Instituto de Investigaciones Electricas (IIE), la Comision Federal de

Hormigones sustentables: resistencia eléctrica y electroquímica

OpenAIRE

Corral Higuera, Ramón; Arredondo Rea, Susana Paola; Gómez Soberón, José Manuel Vicente; Almaral Sánchez, Jorge Luis

2010-01-01

Como estrategias para contribuir en la sustentabilidad de la industria del hormigón se está proyectando mejorar la durabilidad de las estructuras de hormigón reforzado y el reemplazo parcial o total de sus ingredientes por materiales reciclables. En este estudio se evaluó la resistividad eléctrica y su relación con la microestructura y resistencia a la corrosión electroquímica de hormigones reforzados fabricados con características de sustentabilidad, es decir, con áridos reciclados y materia...

Anisotropy and humidity effect on tensile properties and electrical volume resistivity of fused deposition modeled acrylonitrile butadiene styrene composites

OpenAIRE

Almenara Cueto, Carlos Ignacio

2017-01-01

En la presente tesis, se estudió la influencia de la anisotropía y la humedad en las propiedades mecánicas a la tracción y la resistividad volumétrica de los compuestos de Acrilonitrilo Butadieno Estireno reforzado con Nano Tubos de Carbono y Acrilonitrilo Butadieno Estireno reforzado con Micro Fibras de Carbono impresos en 3D de por Deposición de Material Fundido. Para estudiar la influencia de la anisotropía, tres diferentes orientaciones de impresión de capa fueron compar...

IIE Bulletin: selected articles from 1993 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1989 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1990-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1990 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1993 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1992 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1995 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1989 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1989-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1985 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1986-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1986 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1987-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1987 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1988-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1997 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1996 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1991 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1997 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1996 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1990 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1990-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1987 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1987-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1992 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1992-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1986 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1986-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1995 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1991 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1992-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1988 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1988-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1985 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1985-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1994 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

Recent advances in anisotropy of magnetic remanence

Czech Academy of Sciences Publication Activity Database

Chadima, Martin

2011-01-01

Roč. 1, č. 2 (2011), , , E02-1-E02-2 ISSN N. [Latinmag Biennial Meeting /2./. 23.11.2011-26.11.2011, Tandil] Institutional research plan: CEZ:AV0Z30130516 Keywords : palaeomagnetism * geophysics * magnetic remanence Subject RIV: DE - Earth Magnetism, Geodesy, Geography http://www. geofisica .unam.mx/LatinmagLetters/LL11-0102P/E/E02-chadima-2.pdf

Application of magnetic susceptibility as a function of temperature, field and frequency

Czech Academy of Sciences Publication Activity Database

Chadima, Martin

2011-01-01

Roč. 1, č. 2 (2011), E03-E03 ISSN N. [Latinmag Biennial Meeting /2./. 23.11.2011-26.11.2011, Tandil] Institutional research plan: CEZ:AV0Z30130516 Keywords : palaeomagnetism * magnetic susceptibility * geophysics Subject RIV: DE - Earth Magnetism, Geodesy, Geography http://www. geofisica .unam.mx/LatinmagLetters/LL11-0102P/E/E03-chadima-1.pdf

Selection of new drill sites using a Geographic Information System (GIS) at Los Azufres, Mexico; Seleccion de nuevos sitios de perforacion empleando un Sistema de Informacion Geografica (SIG) en Los Azufres, Mexico

Energy Technology Data Exchange (ETDEWEB)

Garcia-Estrada, G.H [Comision Federal de Electricidad, Morelia, Michoacan (Mexico)]. E-mail: gerardo.garcia04@cfe.gob.mx; Lopez-Hernandez, A [Facultad de Ingenieria Civil, Universidad Michoacana de San Nicolas de Hidalgo, Morelia (Mexico); Quijano Leon, J.L Cuauhtemoc [Comision Federal de Electricidad, Morelia, Michoacan (Mexico)

2008-07-15

GIS technology is used to study the effects of distance between producing wells and superficial-thermal features and faults. It is used to interpret topographic lineaments and linear-resistivity interfaces at depth to identify hidden faults. Finally, a geothermal interpretation is conducted by applying a Multi-Criteria Evaluation Method (MCE) on a comprehensive data set, including geology, geophysics, and well production data. Visual comparisons of exploratory and drilling-data maps, with thermal discharge measured from wells, were used to select variables and data ranges that could be more directly associated with energy-production levels. Relative weights assigned by visual inspection are used to extend this knowledge to the whole exploration area. Criteria are compared to calculate a geothermal index representing the geothermal-production suitability for each cell into which the study area is divided. Considering the geometry of fault planes at depths from 700 to 2000 m below the surface, and a 250 m exclusion zone around productive wells, we choose areas from the normalized-geothermal index to propose new drill sites with different levels of risk, ranging from production (low risk) to exploration (high risk) boreholes. [Spanish] Se empleo la tecnologia de Sistemas de Informacion Geografica (SIG) para estudiar el efecto de la distancia de los pozos productores a las manifestaciones termales superficiales y a las fallas, y para interpretar los lineamientos topograficos y las interfaces lineales de resistividad a profundidad para identificar fallas ocultas. Finalmente, se realizo una interpretacion geotermica aplicando un Metodo Multi-Criterio de Evaluacion (MCE) a un conjunto completo de datos que incluye geologia, geofisica y datos de produccion de pozos. Se utilizo una comparacion visual de mapas de datos de exploracion y perforacion con descargas termicas medidas en pozos, a fin de seleccionar variables y rangos de datos que podrian asociarse mas directamente

Research, development and technological innovation of wind turbine control systems; Investigacion, desarrollo e innovacion tecnologica de sistemas de control de aerogeneradores

Energy Technology Data Exchange (ETDEWEB)

Garduno Ramirez, Raul; Rodriguez Martinez, Arnulfo Antelmo; Sanchez Parra, Marino; Martinez Morales, Miguel Angel; Hernandez Cuellar, Maria Aurora; Alcaide Godinez, Indira Xochiquetzal; Re Lopez, Victor Genaro; Hernandez Gonzalez, Roberto [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2012-07-01

Control systems constitute the brain and the nervous system of modern machines, such as wind turbine generators (TGE by its acronym in Spanish). TGEs can work efficiently, safely and almost autonomously, thanks to the control systems with which they are equipped. Conversely, any malfunctioning of the control system may cause failure or damage of a component, a subsystem or even destruction of the TGE itself. This paper introduces some basic facts about generation of electric power from wind energy in the world and Mexico, wind turbogenerators and their most relevant technologies, TGE control systems, and R and TD+I about TGE control systems performed at the Instituto de Investigaciones Electricas. [Spanish] Los sistemas de control constituyen el cerebro y el sistema nervioso de las maquinas modernas, como aerogeneradores (AG). Los AG pueden trabajar eficiente, segura y casi autonomamente, gracias a los sistemas de control con los que estan equipados. De manera inversa, cualquier mal funcionamiento del sistema de control puede provocar falla o dano de un componente, subsistema o incluso la destruccion del propio AG. Este documento introduce algunos hechos basicos en torno a la generacion de energia electrica a partir de energia eolica en el mundo y Mexico, los aerogeneradores y sus tecnologias mas importantes, sistemas de control de AG e I+DT alrededor de los sistemas de control de AG realizados en el Instituto de Investigaciones Electricas.

Energy management system. Opti-dmaX Control; Sistema de administracion de energia. Control Opti-dmaX

Energy Technology Data Exchange (ETDEWEB)

Automatizacion, Productividad y Calidad S.A. de C.V. Puebla (Mexico)

2005-07-01

The electrical energy is an essential element in the activities of the present world. Optimizing its consumption represents a competitive advantage for the companies, since the operation costs would be reduced as well as the negative impact to the environment. In billing the electrical energy the tariffs consider: the consumption, the demand, the power and the schedule of use for the medium and large companies. With the Opti-dmaX system the necessary information for the correct administration of the electrical energy consumption is obtained from the measurement in the strategic points of the installation. At the same time, the processes and services are controlled, maintaining an efficient power operation that diminishes operative costs. [Spanish] La energia electrica es un elemento indispensable en las actividades del mundo actual, y optimizar su consumo, representa una ventaja competitiva para las empresas, ya que se consigue reducir los costos de operacion y el impacto al ambiente. En la facturacion de la energia electrica las tarifas consideran: el consumo, la demanda, la potencia y el horario de uso para las medianas y grandes empresas. Con el sistema Opti-dmaX se obtiene la informacion necesaria para la correcta administracion del consumo de energia electrica a partir de la medicion en los puntos estrategicos de la instalacion. A su vez, se controlan los procesos y servicios, manteniendo una operacion energetica eficiente que minimiza los costos operativos.

The SLIMITRE system: T-P-CCL registry in high temperature oil wells; El sistema SLIMITRE: registro T-P-CCL en pozos petroleros de alta temperatura

Energy Technology Data Exchange (ETDEWEB)

Iglesias R, Eduardo and others [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2001-07-01

PEMEX Exploration and Production (PEP), through its Management of Well Productivity of the Subdivision of Technology and Professional Development (GTDP) and of its Active Luna, faced the problematic of carrying out simultaneous recordings of temperature and pressure in high temperature flowing wells. Capitalizing the experience and know-how of the Gerencia de Geotermia (GG) of the Instituto de Investigaciones Electricas (IIE) in this field, it ordered the resolution of the described problematic, by means of the development of appropriate tools. In order to compliment this order, the GG of the IIE developed the SLIMETRE system, in close collaboration with the personnel of PEP involved in the project. This project framed in the Agreement of Collaboration for the rendering of services between PEMEX Exploration and Production and the Instituto de Investigaciones Electricas. In the sections that follow appear the main parameters of design, the architecture of the system is explained, the tools and the subsystem of data acquisition are described; the obtained results are exposed and the conclusions appear. [Spanish] Pemex Exploracion y Produccion (PEP), a traves de su Gerencia de Productividad de Pozos de la Subdireccion de Tecnologia y Desarrollo Profesional (GTDP) y de su Activo Luna, encaro la problematica de efectuar registros simultaneos de temperatura y presion en pozos fluyentes de alta temperatura. Capitalizando la experiencia y know-how de la Gerencia de Geotermia (GG) del Instituto de Investigaciones Electricas (IIE) en dicho campo, le encargo la resolucion de la problematica descrita, mediante el desarrollo de herramientas apropiadas. Para cumplimentar dicho encargo, la GG del IIE desarrollo el sistema SLIMETRE, en estrecha colaboracion con el personal de PEP involucrado en el proyecto. Este proyecto se enmarco en el Convenio de Colaboracion para la prestacion de servicios entre Pemex Exploracion y Produccion y el Instituto de Investigaciones Electricas. En

First multivendor scheme in CFE to protection of 400 kV transmission line, using optical TC's, digital relays and bus IEC 61850-9-2; Primer esquema multivendedor en CFE para proteccion de linea de transmision de 400 kV, utilizando TC's opticos, relevadores digitales y bus IEC 61850-9-2

Energy Technology Data Exchange (ETDEWEB)

Garcia-Colon, V.R; Rasgado, J.P [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico); Lara C, H; Melendez, C; Juarez, N [Subdireccion de Transmision, Comision Federal de Electricidad (Mexico)

2013-03-15

This paper presents the details of design, installation and putting into service in the Comision Federal de Electricidad (CFE), of the first multi-vendor scheme that exists in the world, for the protection of a 400kV transmission line, which uses optical current transformers and digital relays IEC 61850-9-2. This system arises as a pilot project of the Subdireccion de Transmision of the CFE with the Instituto de Investigaciones Electricas (IIE). To ensure success in the implementation of the protection scheme, CFE joined a team coordinated by the Instituto de Investigaciones Electricas (IIE)involving nine international companies and a university. Pilot protection scheme is in operation under continuous monitoring, in one of the transmission lines of CFE that interconnect Manuel Moreno Torres with El Juile substations. The construction features, the challenges that were overcome and the first results obtained in operation are presented below. [Spanish] Este articulo presenta los detalles del diseno, instalacion y puesta en servicio en la Comision Federal de Electricidad (CFE) del primer esquema multivendedor que existe en el mundo, para la proteccion de una linea de transmision de 400kV, que utiliza transformadores de corriente opticos y relevadores digitales IEC 61850-9-2. Este sistema surge como un proyecto piloto de la Subdireccion de Transmision de la CFE con el Instituto de Investigaciones Electricas (IIE). Para asegurar el exito en la implementacion del esquema de proteccion, la CFE integro un equipo de trabajo coordinado por el Instituto de Investigaciones Electricas (IIE) en el que participaron 9 empresas internacionales y una universidad. El esquema de proteccion piloto, se encuentra en operacion bajo monitoreo continuo, en una de las lineas de transmision de la CFE que interconecta las subestaciones de Manuel Moreno Torres y El Juile. Las caracteristicas de construccion, los retos que fueron vencidos y los primeros resultados obtenidos en su operacion se

Optimum design of a self-supported power transmission tower type 2M2 for 230 kW; Diseno optimo de una torre de transmision autosoportada tipo 2M2, para 230 kW

Energy Technology Data Exchange (ETDEWEB)

Espejel Valdez, Eduardo [Instituto de Investigaciones Electricas, Cuernavaca (Mexico); Millan Monje, Alejandro; Honk Hernandez, Wenceslao [Comision Federal de Electricidad, (CFE), Mexico, D. F. (Mexico)

1986-12-31

A group of specialists from the Comision Federal de Electricidad (CFE) and of the Instituto de Investigaciones Electricas (IIE) analyzes the design of various types of power transmission towers in their application stage, in order to enhance them. In this article the structural characteristics of the self-supported tower type 2M2 for 230 kV of two circuits and of suspension, are presented. [Espanol] Un grupo de especialistas de la Comision Federal de Electricidad (CFE) y del Instituto de Investigaciones Electricas (IIE) analiza el diseno de diversos tipos de torres de transmision en su etapa de aplicacion, con el fin de mejorarlos. En este articulo se presentan las caracteristicas estructurales de la torre autosoportada tipo 2M2 para 230 kV, de dos circuitos y de suspension.

Industrial stacks design; Diseno de chimeneas industriales

Energy Technology Data Exchange (ETDEWEB)

Cacheux, Luis [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1987-12-31

The Instituto de Investigaciones Electricas (IIE) though its Civil Works Department, develops, under contract with CFE`s Gerencia de Proyectos Termoelectricos (Management of Fossil Power Plant Projects), a series of methods for the design of stacks, which pretends to solve the a present day problem: the stack design of the fossil power plants that will go into operation during the next coming years in the country. [Espanol] El Instituto de Investigaciones Electricas (IIE), a traves del Departamento de Ingenieria Civil, desarrolla, bajo contrato con la Gerencia de Proyectos Termoelectricos, de la Comision Federal de Electricidad (CFE), un conjunto de metodos para el diseno de chimeneas, con el que se pretende resolver un problema inmediato: el diseno de las chimeneas de las centrales termoelectricas que entraran en operacion durante los proximos anos, en el pais.

Optimum design of a self-supported power transmission tower type 2M2 for 230 kW; Diseno optimo de una torre de transmision autosoportada tipo 2M2, para 230 kW

Energy Technology Data Exchange (ETDEWEB)

Espejel Valdez, Eduardo [Instituto de Investigaciones Electricas, Cuernavaca (Mexico); Millan Monje, Alejandro; Honk Hernandez, Wenceslao [Comision Federal de Electricidad, (CFE), Mexico, D. F. (Mexico)

1985-12-31

A group of specialists from the Comision Federal de Electricidad (CFE) and of the Instituto de Investigaciones Electricas (IIE) analyzes the design of various types of power transmission towers in their application stage, in order to enhance them. In this article the structural characteristics of the self-supported tower type 2M2 for 230 kV of two circuits and of suspension, are presented. [Espanol] Un grupo de especialistas de la Comision Federal de Electricidad (CFE) y del Instituto de Investigaciones Electricas (IIE) analiza el diseno de diversos tipos de torres de transmision en su etapa de aplicacion, con el fin de mejorarlos. En este articulo se presentan las caracteristicas estructurales de la torre autosoportada tipo 2M2 para 230 kV, de dos circuitos y de suspension.

Electrorheologic fluids; Fluidos electroreologicos

Energy Technology Data Exchange (ETDEWEB)

Rejon G, Leonardo; Lopez G, Francisco; Montoya T, Gerardo [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico); Manero B, Octavio [Instituto de Investigaciones en Materiales, UNAM.(Mexico)

2003-07-01

The present article has as an objective to offer a review of the research work made in the Instituto de Investigaciones Electricas (IIE) on the study of the electrorheologic fluids whose flow properties can abruptly change in the presence of an electric field when this is induced by a direct current. The electrorheologic fluids have their main application in the manufacture of self-controlling damping systems. [Spanish] El presente articulo tiene por objetivo ofrecer una resena de los trabajos de investigacion realizados en el Instituto de Investigaciones Electricas (IIE) sobre el estudio de los fluidos electroreologicos cuyas propiedades de flujo pueden cambiar abruptamente en presencia de un campo electrico cuando este es inducido por una corriente directa. Los fluidos electroreologicos tienen su principal aplicacion en la fabricacion de sistemas de amortiguamiento autocontrolables.

Industrial stacks design; Diseno de chimeneas industriales

Energy Technology Data Exchange (ETDEWEB)

Cacheux, Luis [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1986-12-31

The Instituto de Investigaciones Electricas (IIE) though its Civil Works Department, develops, under contract with CFE`s Gerencia de Proyectos Termoelectricos (Management of Fossil Power Plant Projects), a series of methods for the design of stacks, which pretends to solve the a present day problem: the stack design of the fossil power plants that will go into operation during the next coming years in the country. [Espanol] El Instituto de Investigaciones Electricas (IIE), a traves del Departamento de Ingenieria Civil, desarrolla, bajo contrato con la Gerencia de Proyectos Termoelectricos, de la Comision Federal de Electricidad (CFE), un conjunto de metodos para el diseno de chimeneas, con el que se pretende resolver un problema inmediato: el diseno de las chimeneas de las centrales termoelectricas que entraran en operacion durante los proximos anos, en el pais.

Analysis of Earthquake Catalogs for CSEP Testing Region Italy

International Nuclear Information System (INIS)

Peresan, A.; Romashkova, L.; Nekrasova, A.; Kossobokov, V.; Panza, G.F.

2010-07-01

A comprehensive analysis shows that the set of catalogs provided by the Istituto Nazionale di Geofisica e Vulcanologia (INGV, Italy) as the authoritative database for the Collaboratory for the Study of Earthquake Predictability - Testing Region Italy (CSEP-TRI), is hardly a unified one acceptable for the necessary tuning of models/algorithms, as well as for running rigorous prospective predictability tests at intermediate- or long-term scale. (author)

Procedure to determine the convenience of installing a co-generation system; Procedimiento para determinar la conveniencia de instalar un sistema de cogeneracion

Energy Technology Data Exchange (ETDEWEB)

Colin Castellanos, Carlos; Acosta Torres, Aracely [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1993-12-31

In this article a methodology for the selection of the co-generation system better adapted to the energy needs of an industry is presented, covering the following schemes: a) Satisfy the thermal demand and deliver to the net the excess electricity generated. b) Reduce the functioning level of the machine and produce electricity in accordance with the internal demand. The thermal demand will be satisfied, for instance, integrating a boiler in the cycle. c) Satisfy the electric demand and utilize only in part the available heat. d) Or else, reduce the operation level of the machine and produce only the necessary thermal energy, taking from the net the electric energy needed to cover the total demand. [Espanol] En este articulo se presenta una metodologia para la seleccion del sistema de cogeneracion que mejor se adapte a las necesidades energeticas de una industria, cubriendo los siguientes esquemas: a) Satisfacer la demanda termica y ceder a la red el exceso de energia electrica generada. b) Reducir el nivel de funcionamiento de la maquina y producir electricidad de acuerdo a la demanda interna. La demanda termica se cubrira, por ejemplo, integrando una caldera al ciclo. c) Satisfacer la demanda electrica y, utilizar solo en parte el calor disponible. d) O bien, reducir el nivel de operacion de la maquina y solo producir la energia termica necesaria, tomando de la red la energia electrica para cubrir la demanda total.

Evaluation of the national cogeneration potential as an option for the expansion of the national electric system; Evaluacion del potencial nacional de cogeneracion como opcion en la expansion del sistema electrico nacional

Energy Technology Data Exchange (ETDEWEB)

Nieva Gomez, Rolando; Hernandez Galicia, Julio Alberto [Instituto de Investigaciones Electricas, Cuernavaca (Mexico); Portes Mascorro, Enrique; Alvarez Chavez, Jose Maria [Comision Nacional para el Ahorro de Energia (CONAE), Mexico, D. F. (Mexico)

1997-12-31

The Comision Nacional para el Ahorro de Energia (CONAE) carried out a study to determine the amount of electric energy available by cogeneration in the industrial sector of our country. This study is based in a survey among the enterprises with the largest fuel consumption belonging to the industrial and commercial sectors and to the petrochemical branch of Petroleos Mexicanos (PEMEX). The results of the study are presented, which show the location of the cogeneration potential by the following estimates: a) The scenario under a potential of 5770 MW to generate annually 4.55 x 107 MWh of electric energy. b) The scenario with a potential of 10819 MW to generate annually 9.47 x 107 Mwh of electric energy [Espanol] La Comision Nacional para el Ahorro de Energia (CONAE) llevo acabo un estudio para determinar la cantidad de energia electrica disponible por cogeneracion en el sector industrial de nuestro pais. El estudio se fundamenta en una encuesta entre las empresas con mayor consumo de combustibles pertenecientes a los sectores industrial y comercial y al ramo petroquimico de Petroleos Mexicanos (PEMEX). Se presentan los resultados del estudio, el cual muestra la ubicacion del potencial de cogeneracion por los siguientes estimados: a) El escenario bajo con un potencial de 5770 MW para producir anualmente 4.55 x 107 Mwh de energia electrica. b) El escenario alto con un potencial de 10819 MW para producir anualmente 9.47 x 107 MWh de energia electrica

Evaluation of the national cogeneration potential as an option for the expansion of the national electric system; Evaluacion del potencial nacional de cogeneracion como opcion en la expansion del sistema electrico nacional

Energy Technology Data Exchange (ETDEWEB)

Nieva Gomez, Rolando; Hernandez Galicia, Julio Alberto [Instituto de Investigaciones Electricas, Cuernavaca (Mexico); Portes Mascorro, Enrique; Alvarez Chavez, Jose Maria [Comision Nacional para el Ahorro de Energia (CONAE), Mexico, D. F. (Mexico)

1998-12-31

The Comision Nacional para el Ahorro de Energia (CONAE) carried out a study to determine the amount of electric energy available by cogeneration in the industrial sector of our country. This study is based in a survey among the enterprises with the largest fuel consumption belonging to the industrial and commercial sectors and to the petrochemical branch of Petroleos Mexicanos (PEMEX). The results of the study are presented, which show the location of the cogeneration potential by the following estimates: a) The scenario under a potential of 5770 MW to generate annually 4.55 x 107 MWh of electric energy. b) The scenario with a potential of 10819 MW to generate annually 9.47 x 107 Mwh of electric energy [Espanol] La Comision Nacional para el Ahorro de Energia (CONAE) llevo acabo un estudio para determinar la cantidad de energia electrica disponible por cogeneracion en el sector industrial de nuestro pais. El estudio se fundamenta en una encuesta entre las empresas con mayor consumo de combustibles pertenecientes a los sectores industrial y comercial y al ramo petroquimico de Petroleos Mexicanos (PEMEX). Se presentan los resultados del estudio, el cual muestra la ubicacion del potencial de cogeneracion por los siguientes estimados: a) El escenario bajo con un potencial de 5770 MW para producir anualmente 4.55 x 107 Mwh de energia electrica. b) El escenario alto con un potencial de 10819 MW para producir anualmente 9.47 x 107 MWh de energia electrica

Design of a hydraulic microturbine type Michell-Banki; Diseno de una microturbina hidraulica tipo Michell-Banki

Energy Technology Data Exchange (ETDEWEB)

Lopez Luiz, Norberto; Rodriguez Bautista, Jose; Verduzco Figueroa, Hilario; Gudino Lau, Jorge; Galindo Granados, Miguel angel [Universidad de Colima, Facultad de Ingenieria Electromecanica, Manzanillo, Colima (Mexico)]. E-mail: norberto_lopez@ucol.mx

2010-11-15

The aim of this paper is to present the design of a hydraulic microturbine (MTH), which may be installed in areas where supplies are not available for electric power transmission lines, but possessing hydroelectric. MTH's role is to convert hydraulic energy into mechanical work, is coupled to an electric generator, whose function is to convert the mechanical energy into electrical energy. The turbine generator set will produce more electric power the greater the hydroelectric of the area. In southern Mexico, we have great hydroelectric potential, as the case of the states of Veracruz, Chiapas and Oaxaca, which have small causes of rivers where the MTH could be installed and put into operation. [Spanish] El objetivo de este articulo es presentar el diseno de una microturbina hidraulica (MTH), la cual podra ser instalada en zonas donde no se cuente con suministro de energia electrica por medio de lineas de transmision, pero que posean aprovechamientos hidroelectricos. La funcion de la MTH es convertir la energia hidraulica en trabajo mecanico, estara acoplada a un generador electrico, cuya funcion es convertir dicha energia mecanica en energia electrica. El conjunto turbina generador producira mas potencia electrica mientras mayor sea el aprovechamiento hidroelectrico de la zona. En el sur de Mexico contamos con un gran potencial hidroelectrico, como el caso de los estados de Veracruz, Chiapas y Oaxaca, que cuentan con pequenos causes de rios donde las MTH podrian ser instaladas y puestas en operacion.

Procedure to determine the convenience of installing a co-generation system; Procedimiento para determinar la conveniencia de instalar un sistema de cogeneracion

Energy Technology Data Exchange (ETDEWEB)

Colin Castellanos, Carlos; Acosta Torres, Aracely [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1992-12-31

In this article a methodology for the selection of the co-generation system better adapted to the energy needs of an industry is presented, covering the following schemes: a) Satisfy the thermal demand and deliver to the net the excess electricity generated. b) Reduce the functioning level of the machine and produce electricity in accordance with the internal demand. The thermal demand will be satisfied, for instance, integrating a boiler in the cycle. c) Satisfy the electric demand and utilize only in part the available heat. d) Or else, reduce the operation level of the machine and produce only the necessary thermal energy, taking from the net the electric energy needed to cover the total demand. [Espanol] En este articulo se presenta una metodologia para la seleccion del sistema de cogeneracion que mejor se adapte a las necesidades energeticas de una industria, cubriendo los siguientes esquemas: a) Satisfacer la demanda termica y ceder a la red el exceso de energia electrica generada. b) Reducir el nivel de funcionamiento de la maquina y producir electricidad de acuerdo a la demanda interna. La demanda termica se cubrira, por ejemplo, integrando una caldera al ciclo. c) Satisfacer la demanda electrica y, utilizar solo en parte el calor disponible. d) O bien, reducir el nivel de operacion de la maquina y solo producir la energia termica necesaria, tomando de la red la energia electrica para cubrir la demanda total.

Gas turbine application in power plants of Mexican refineries; Aplicacion de turbinas de gas en plantas de fuerza de refinerias mexicanas

Energy Technology Data Exchange (ETDEWEB)

Alcaraz Calderon, A. M.; Rodriguez Martinez, H.; Garcia Paredes, Job; Morales Guillen, Magdalena; Manzanares Papayanapolous, Emilio [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)]. E-mail: malcaraz@iie.org.mx; jhrm@iie.org.mx; jgarcia@iie.org.mx; mmmg@iie.org.mx; emp@iie.org.mx

2010-11-15

This article presents an overview of the application to have the gas turbine power generation systems, electric and steam for Mexican refineries. First there is a general description of the gas turbines and heat recovery (system components CHP) and CHP schemes are based on gas turbines capable of use in Mexican refineries. Subsequently referred to the characteristics of energy consumption (steam and electricity) from Mexican refineries and performs a technical analysis of CHP schemes based on gas turbines from the point of view of rates Q/W, power efficiencies and combined concluded that by their nature are very useful for refinery and gives some recommendations for improved implementation. [Spanish] En este articulo se presenta una vision general de la aplicacion que tienen las turbinas de gas en sistemas de generacion de energia electrica y vapor para refinerias mexicanas. Primeramente se da una descripcion general de las turbinas de gas y recuperadores de calor (componentes principales del sistema de cogeneracion) y se muestran los esquemas de cogeneracion basados en turbinas de gas susceptibles de utilizar en refinerias mexicanas. Posteriormente se mencionan las caracteristicas de consumos energeticos (vapor y energia electrica) de las refinerias mexicanas y se realiza un analisis tecnico de los esquemas de cogeneracion basado en turbinas de gas desde el punto de vista de tasas Q/W, eficiencias electricas y combinadas, concluyendose que por sus caracteristicas son muy utiles para refinerias y se dan algunas recomendaciones para su mejor aplicacion.

UFISA: electric facility engineering for the service of emergy market

International Nuclear Information System (INIS)

Gutierrez Zapico, A.

1997-01-01

UFISA is the engineering company with the experience of UNION ELECTRICA FENOSA S.A. It activity began in 1990. This company offers to national and international markets the services for energy consumers and for the electricity costumers. (Author)

The 2010 Chile Earthquake: Rapid Assessments of Tsunami

OpenAIRE

Michelini, A.; Lauciani, V.; Selvaggi, G.; Lomax, A.

2010-01-01

After an earthquake underwater, rapid real-time assessment of earthquake parameters is important for emergency response related to infrastructure damage and, perhaps more exigently, for issuing warnings of the possibility of an impending tsunami. Since 2005, the Istituto Nazionale di Geofisica e Vulcanologia (INGV) has worked on the rapid quantification of earthquake magnitude and tsunami potential, especially for the Mediterranean area. This work includes quantification of earthquake size fr...

Proceedings of the Annual Seismic Research Symposium on Monitoring a Comprehensive Test Ban Treaty (17th) Held in Scottsdale, Arizona on 12-15 September, 1995.

Science.gov (United States)

1995-08-14

Observaciones de refracci6n sismica en el noroeste Colombiano en la latitud 5.5*N. In Investigaciones Geofisicas sobre las Estructuras Oc6ano...636 Levander, A.; S.P. Larkin; L.M. La Flame; S. Pullammanapaflil and J.A. Goff Crustal Heterogeneity in the Basin...with cabled connections to land The coverage of the six stations is strongly biased toward the Southern Hemisphere in part for the rea- son that

The corporative information systems and their application in the SICORP of Comision Federal de Electricidad; Los sistemas de informacion corporativa y su aplicacion en el SICORP de la Comision Federal de Electricidad

Energy Technology Data Exchange (ETDEWEB)

Mejia Lavalle, Manuel; Gonzalez Sustaeta, Jorge [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico); Miranda Miranda, Oscar [Comision Federal de Electricidad (Mexico)

2000-07-01

To be well informed sometimes is a difficult goal to reach, mainly when the companies are developed and grown at the present times rate. It is from this necessity that the Corporative Information Systems (SIC) arise. In this article a real application of a SIC in the Comision Federal de Electricidad (CFE) is presented, in whose conceptualization and implementation, personnel of the Instituto de Investigaciones Electricas (IIE) is participating. [Spanish] Estar bien informado a veces resulta una meta dificil de alcanzar, sobre todo cuando las empresas se desarrollan y crecen al ritmo de los tiempos actuales. Es a partir de esta necesidad que surgen los Sistemas de Informacion Corporativa (SIC). En este articulo se presenta una aplicacion real de un SIC en la Comision Federal de Electricidad (CFE), en cuya conceptualizacion e implantacion esta participando personal del Instituto de Investigaciones Electricas (IIE).

Evaluation of the useful life of steam turbine rotors; Evaluacion de vida util de rotores de turbinas de vapor

Energy Technology Data Exchange (ETDEWEB)

Carnero Parra, Antonio; Garcia Illescas, Rafael; Kubiak Szyszka, Janusz [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

1999-07-01

This article presents the methodology applied by the Management of Turbomachinery of the Institute of Investigaciones Electricas (IIE), for the evaluation of the remaining useful life of steam turbine rotors in the phase of initiation of fissures. The evaluation of the remaining useful life of turbines, will reveal the real state of health of the rotor and will serve as a base for the future decision making that guarantees their structural integrity. [Spanish] El presentes articulo presenta la metodologia aplicada por la Gerencia de Turbomaquinaria del Instituto de Investigaciones Electricas (IIE), para la evaluacion de la vida util remanente de rotores de turbinas de vapor en la fase de iniciacion de fisuras. La evaluacion de la vida util de turbinas, revelar el estado real de salud del rotor y servira de base para la toma de decisiones futuras que garanticen su integridad estructural.

Geotermics; Geotermia

Energy Technology Data Exchange (ETDEWEB)

Arellano Gomez, Victor [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

1999-07-01

The Instituto de Investigaciones Electricas (IIE) through the Management of Geotermics has developed technologies that have allowed the utilization of the existing natural thermal energy from inside the Earth. In this article the developments made in this management are presented among which are the following ones: development of geotermometer of cationic composition (GCC), development of an Anapress system, and design and construction of mixed permeameter gas - liquid. [Spanish] El Instituto de Investigaciones Electricas (IIE) a traves de la Gerencia de Geotermia ha desarrollado tecnologias que han permitido el aprovechamiento de la energia termica natural existente en el interior de la tierra. En este articulo se presentan los desarrollos realizados en esta gerencia entre los cuales se encuentran los siguientes: desarrollo de un geotermometro de composicion cationica (GCC), desarrollo de un sistema Anapres, y diseno y construccion de un permeametro mixto gas - liquido.

Scenarios simulation for the conservation and efficient use of energy, using passive control measures; Simulacion de escenarios de ahorro y uso eficiente de energia, utilizando medidas de control pasivo

Energy Technology Data Exchange (ETDEWEB)

Ramos, G.; Heard, Ch.; Sanchez Viveros, A. [Instituto de Investigaciones Electricas,Cuernavaca (Mexico)

1997-12-31

Every one involved with the conservation and efficient use of electric energy, has listened in reiterative occasions to the causes that changed the conventional mentality at the beginning of the seventies. Nevertheless, there are many persons that still ignore that by using the energy rationally, their costs are significantly reduced, their comfort is enhanced and the environmental problems are minimized. Specifically, in the domestic sector, from the figures reported by the Comision Federal de Electricidad (CFE) in 1996, the electric energy sold was 28,410 Gwh, that is, 23.4% of the total consumption (121,579 Gwh). Table 1 presents the average by tariff in the national domestic sector, which shows that 20% of the electricity consumed was required for environmental conditioning (air conditioning, evaporative coolers and electric fans). The above figures quantitatively show that there is a strong impact in the consumption of electric energy due to weather conditions. For this reason, currently the Comision Nacional de Ahorro de Energia (CONAE) and the Fideicomiso para el Ahorro de Energia (FIDE) are promoting standards and projects to propitiate the rationalization in the use of energy, besides of achieving the improvement of thermal comfort conditions. One more case would be the Fideicomiso para el Aislamiento Termico de la Vivienda en Mexicali (FIPATERM), which promotes the financing of saving measures and efficient energy use in cities with extreme climate. This paper describes the strategy that was followed by the Instituto de Investigaciones Electricas (IIE), for the development of the human and material infrastructure, that has allowed the sustainment of several projects in the saving and efficient use of energy in CFE, CONAE, FIDE, FIPATERM and the Lawrence Berkeley National Laboratory (LBNL), concretely in relationship with the thermal analysis of dwellings. [Espanol] Todos aquellos relacionados con el ahorro y el uso eficiente de la energia electrica, han

Assessment and planning of the electrical systems in Mexican refineries by 2014

Energy Technology Data Exchange (ETDEWEB)

Ruiz Flores, Luis Ivan; Rodriguez Martinez, Jose Hugo [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico); Dario Taboada; Guillermo; Pano Jimenez, Javier [PEMEX, (Mexico)

2012-07-01

ser suministrados por las fuentes de generacion instaladas en cada una de las refinerias y a traves de una expansion de su capacidad de generacion. Estas centrales electricas necesitan aumentar su produccion de electricidad y vapor de agua a niveles por encima de su capacidad instalada, lo que significa integrar nuevos equipos de generacion de energia (gas o vapor turbogeneradores), asi como el aumento de las cargas electricas. En la actualidad, Petroleos Mexicanos (PEMEX) tiene la intencion de reestructurar sus sistemas electricos y de vapor, a fin de suministrar de forma optima los servicios requeridos para la produccion de combustibles de alta calidad. En este articulo se presenta la situacion actual de los sistemas de energia electricas originales de las refinerias y se evalúa la integracion electrica de las plantas de proceso en los nuevos esquemas tipicos. Tambien se presentan los esquemas conceptuales propuestos para reestructurar el sistema de energia electrica para dos refinerias, cuya planificacion estrategica se centro en la aplicacion de las modificaciones necesarias para la integracion de nuevas plantas de proceso que demandaran alrededor de 20 MW para cada refineria en el ano 2014. Los resultados del analisis permitieron identificar las condiciones actuales de los sistemas de energia electrica en la industria de refinacion de petroleo o de la Industria Nacional de Refinacion (INR), y por lo tanto ofrecer soluciones tecnicas que podrian ser utiles para los ingenieros que desarrollan proyectos similares.

Scenarios simulation for the conservation and efficient use of energy, using passive control measures; Simulacion de escenarios de ahorro y uso eficiente de energia, utilizando medidas de control pasivo

Energy Technology Data Exchange (ETDEWEB)

Ramos, G; Heard, Ch; Sanchez Viveros, A [Instituto de Investigaciones Electricas,Cuernavaca (Mexico)

1998-12-31

Every one involved with the conservation and efficient use of electric energy, has listened in reiterative occasions to the causes that changed the conventional mentality at the beginning of the seventies. Nevertheless, there are many persons that still ignore that by using the energy rationally, their costs are significantly reduced, their comfort is enhanced and the environmental problems are minimized. Specifically, in the domestic sector, from the figures reported by the Comision Federal de Electricidad (CFE) in 1996, the electric energy sold was 28,410 Gwh, that is, 23.4% of the total consumption (121,579 Gwh). Table 1 presents the average by tariff in the national domestic sector, which shows that 20% of the electricity consumed was required for environmental conditioning (air conditioning, evaporative coolers and electric fans). The above figures quantitatively show that there is a strong impact in the consumption of electric energy due to weather conditions. For this reason, currently the Comision Nacional de Ahorro de Energia (CONAE) and the Fideicomiso para el Ahorro de Energia (FIDE) are promoting standards and projects to propitiate the rationalization in the use of energy, besides of achieving the improvement of thermal comfort conditions. One more case would be the Fideicomiso para el Aislamiento Termico de la Vivienda en Mexicali (FIPATERM), which promotes the financing of saving measures and efficient energy use in cities with extreme climate. This paper describes the strategy that was followed by the Instituto de Investigaciones Electricas (IIE), for the development of the human and material infrastructure, that has allowed the sustainment of several projects in the saving and efficient use of energy in CFE, CONAE, FIDE, FIPATERM and the Lawrence Berkeley National Laboratory (LBNL), concretely in relationship with the thermal analysis of dwellings. [Espanol] Todos aquellos relacionados con el ahorro y el uso eficiente de la energia electrica, han

Co-generation project for the Combined Cycle Power Plant President Juarez Rosarito and a reverse osmosis desalting plant; Proyecto de cogeneracion para la planta de ciclo combinado Presidente Juarez Rosarito y una planta desaladora de osmosis inversa

Energy Technology Data Exchange (ETDEWEB)

Beltran Mora, Hector; Espindola Hernandez, Salvador [Universidad NAcional Autonoma de Mexico (UNAM), Mexico, D.F. (Mexico)

2006-11-15

In this work a technical and economical analysis of the installation of a reverse osmosis desalting plant connected to a power station that uses the combined cycle technology under a co-generation scheme is presented: production of electricity and water. The operation program of the desalting power station will be determined by the demand of energy of the combined cycle power station; the proposal is that the desalting plant operates in the hours of low load of the power station and shuts down at the peak hours of electrical energy demand. So that this study is representative, the demand curves of electric energy of the units of combined cycle of Central President Juarez Rosarito of the Comision Federal de Electricidad (CFE) have been taken and updated the data of the reverse osmosis desalting plants that are available at the moment in the market. As basis of the study the level costs will be determined so much as the electrical energy generated by the power station of combined cycle, operating inside and outside of a co-generation scheme and the costs made level for the water produced by the reverse osmosis plant under two assumptions: the first one is buying the electrical energy from CFE and the second one considering that the CFE is the owner of the desalting plant and therefore the cost of electrical energy to desalting the plant is zero. This work shows the economic impacts on the costs of the generation of electrical energy and on those of the desalted water in a co-generation scheme. The results shown in this study can be considered for the future planning in the construction of desalting plants to supply of water in the Northwestern zones of the country where serious problems of water shortage exist. [Spanish] En este trabajo se presenta un analisis tecnico y economico de la instalacion de una planta desaladora de osmosis inversa acoplada a una central de generacion de energia electrica que utiliza la tecnologia de ciclo combinado bajo un esquema de

INFRAESTRUCTURA DE COMUNICACIONES EN MICRORREDES ELECTRICAS

Directory of Open Access Journals (Sweden)

Elvis Eduardo Gaona García

2014-11-01

Full Text Available Este artículo muestra un estudio de la actualidad técnica y tecnológica de la infraestructura de comunicaciones utilizadas en  microrredes eléctricas, en este sentido ha surgido la necesidad de investigar, analizar, mejorar y desarrollar métodos de comunicación tanto alámbricos como inalámbricos que permitan crear una infraestructura de comunicaciones que soporte las características de control, supervisión y trasmisión de información entre dispositivos de control en una microrred de forma eficiente, segura y confiable.Dadas estas características en el artículo se analizan  las diferentes arquitecturas y topologías propuestas entorno a comunicaciones en el ambiente Smart Grid que se puedan adaptar a la forma en que opera una microrred. Se muestran las propuestas  y desarrollos realizados en el  área de telecomunicaciones concerniente a protocolos de comunicaciones utilizados en microrredes eléctricas, con el fin de conocer las tecnologías, protocolos y algoritmos utilizados en la transmisión de datos.

Assessment methodology of the summer time schedule change (CHV) in Mexico: 10 years of application; Metodologia de evaluacion del cambio de horario de verano (CHV) en Mexico: 10 anos de aplicacion

Energy Technology Data Exchange (ETDEWEB)

Maqueda Zamora, Martin Roberto; Perez Rebolledo, Hugo [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2008-07-01

The Summer Time is strongly bound to the rational use of the natural resources, since it is a measure that contributes to the care of the country energy resources and the improvement of the environment. This measure consists of advancing the clock one hour in the months that have greater insolation in the country and when doing it, the electrical energy demand is reduced, a saving in the consumption of the same is obtained, resulting in a reduction of the fossil fuel consumption that is needed to generate electric energy and also the emission of polluting agents to the environment is detained. It is to emphasize that the sustainable development and the environment depend on the energy efficient use. With the application of the Summertime Schedule, the entire country participate in the care of the energy resources that are derived from their application and generates in the population a culture of the care of the energy and the environment. This program is applied to world-wide level, including the industrialized countries. In this paper the methodology implemented by the Instituto de Investigaciones Electricas (IIE) is presented, to realize the calculations of saving in electrical power consumption and the quantification of the avoided demand, as well as the main results obtained in 10 years of application of the measure in Mexico. [Spanish] El horario de verano esta fuertemente ligado al uso racional de los recursos naturales, ya que es una medida que contribuye al cuidado de los recursos energeticos del pais y la mejora del medio ambiente. Esta medida consiste en adelantar el reloj una hora en los meses que se tiene mayor insolacion en el pais y al hacerlo, se reduce la demanda de energia electrica, se tiene un ahorro en el consumo de la misma y como resultado se reduce el consumo de combustibles fosiles que se necesitan para generar la energia electrica y tambien se dejan de emitir contaminantes al medio ambiente. Cabe resaltar que el desarrollo sustentable y el

Lacunarity of geophysical well logs in the Cantarell oil field, Gulf of Mexico

Energy Technology Data Exchange (ETDEWEB)

Arizabalo, Ruben Dario [Instituto Mexicano del Petroleo, Mexico, D.F. (Mexico); Oleschko, Klavdia [Centro de Geociencias, Universidad Nacional Autonoma de Mexico, Juriquilla, Queretaro (Mexico); Korvin, Gabor [King Fahd University, Dhahran (Saudi Arabia); Lozada, Manuel [Instituto Mexicano del Petroleo, Mexico, D.F. (Mexico); Castrejon, Ricardo [Facultad de Ingenieria, Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico); Ronquillo, Gerardo [Instituto Mexicano del Petroleo, Mexico, D.F. (Mexico)

2006-04-15

Lacunarity and fractal variations in geophysical well logs are associated with stratigraphic and petrophysical properties of the naturally fractured Cantarell field in the Gulf of Mexico. Neutron porosity (NPHI), density (RHOB, DRHO, PEF), resistivity (LLD, LLS, MSFL), natural radioactivity (GR, CGR, URAN, POTA, THOR) and caliper (CALI) logs are studied. The resistivity logs yielded remarkably high lacunarity values, especially in the hydrocarbon source- and reservoir rocks. Lacunarity {delta} was found to depend on the resolution and radial depth of penetration of the logging method. It systematically increased in the following order: {delta}(RHOB) < {delta}(CALI) < {delta}(PEF) < {delta}(URAN) < {delta}(GR) < {delta}(NPHI) < {delta}(POTA) < {delta}(CGR) < {delta}(THOR) < {delta}(MSFL) < {delta}(DRHO) < {delta}(LLS) < {delta}(LLD). [Spanish] En este trabajo fueron analizadas las variaciones fractales y de lagunaridad de los registros geofisicos de pozo, con el fin de asociarlos con las propiedades estratigraficas y petrofisicas del yacimiento naturalmente fracturado de Cantarell, en el Golfo de Mexico. Los registros considerados fueron: porosidad neutron (NPHI), densidad (RHOB, DRHO, PEF), resistividad (LLD, LLS, MSFL), radiactividad natural (GR, CGR, URAN, POTA, THOR) y caliper (CALI). Los registros de resistividad produjeron valores de lagunaridad notablemente altos, especialmente en las rocas generadoras y almacenadoras, a diferencia de los demas registros, cuya homogeneidad de traza implico una baja lagunaridad. Los resultados indican que la lagunaridad observada depende de la resolucion y profundidad radial de penetracion del metodo geofisico estudiado y aumenta sistematicamente en el siguiente orden: {delta}(RHOB) < {delta}(CALI) < {delta}(PEF) < {delta}(URAN) < {delta}(GR) < {delta}(NPHI) < {delta}(POTA) < {delta}(CGR) < {delta}(THOR) < {delta}(MSFL) < {delta}(DRHO) < {delta}(LLS) < {delta}(LLD).

Control system modernization of a turbo-gas unit of CFE in the Comarca Lagunera; Modernizacion del sistema de control de una unidad turbogas de la CFE en la Comarca Lagunera

Energy Technology Data Exchange (ETDEWEB)

Sanchez P, Marino; De Lara J, Salvador; Hernandez Muniz, Alfredo [Industria SIGRAMA, Cuernavaca, Morelos (Mexico); Garcia Cabello, Raymundo [Comision Federal de Electricidad (Mexico)

2004-07-01

At the present time, the turbo-gas units (TGU) make an important contribution in the development and growth of the national power sector, since this type of units pertaining to the Comision Federal de Electricidad (CFE) contributes with the 6.23% of the national production, that is to say, 2600 MW approx. The turbo-gas units are aero-derivative gas turbines used for power generation, pumping and compression. Generally, they are used to support urgent requests in the demand of electricity or, for the permanent supply of electrical energy in isolated zones. In addition, they are used to quickly get into and get out of operation, which requires high availability, trustworthiness and flexibility. In this sense, and with the intention of improving the operation of the TGUs, the Gerencia de Control e Instrumentation (GCI) (Management of Control and Instrumentation) of the Instituto de Investigaciones Electricas (IIE), has developed a control technology for this type of units, able to replace the original control systems of units with even 30 years of continuous operation or to be installed in new units. [Spanish] En la actualidad, las unidades de turbogas (UTG) tienen una importante contribucion en el desarrollo y crecimiento del sector energetico nacional, pues este tipo de unidades pertenecientes a la Comision Federal de Electricidad (CFE) aportan el 6.23% de la produccion nacional, es decir, 2600 MW aproximadamente. Las unidades turbogas son turbinas de gas aeroderivativas empleadas para la generacion electrica, bombeo y compresion. Por lo general, son utilizadas para apoyar solicitudes urgentes en la demanda de electricidad o bien, para el suministro permanente de energia electrica en zonas aisladas. Ademas, se usan para entrar y salir rapidamente en operacion, lo que requiere alta disponibilidad, confiabilidad y flexibilidad. En este sentido, y con la intencion de mejorar las UTG, la Gerencia de Control e Instrumentacion (GCI) del Instituto de Investigaciones

Optimum Concentration Ratio Analysis Using Dynamic Thermal Model for Concentrated Photovoltaic System

Science.gov (United States)

2012-03-22

Iberoamericano de Estudiantes de Ingenieria Electrica, s.l. : Cibelec, 2005. 40. Brogren, Maria. Optical Effeciency of Low-Concentrating Solar Energy...46 3.5 Particular Solution to the Transport Equation...50 3.7 Homogenous Solution the Transport Equation ..................................................... 51 3.8 Total Excess

Second statement of the working group on electrocardiographic diagnosis of left ventricular hypertrophy

DEFF Research Database (Denmark)

Bacharova, Ljuba; Estes, E Harvey; Bang, Lia E

2011-01-01

The Working Group on Electrocardiographic Diagnosis of Left Ventricular Hypertrophy, appointed by the Editor of the Journal of Electrocardiology, presents the alternative conceptual model for the ECG diagnosis of left ventricular hypertrophy (LVH). It is stressed that ECG is a record of electrica...

Probabilistic fracture mechanics in the integrity evaluation of components; Mecanica de fractura probabilista en la evaluacion de la integridad de componentes

Energy Technology Data Exchange (ETDEWEB)

Franco Nava, Jose Manuel; Torres Toledano, Jose Gerardo; Sanchez Sanchez, Ramon [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1996-12-31

Because of the importance of fracture mechanics in applications to pressure vessels, piping and other components used in thermal power plants, the Mechanical Engineering Unit of the Instituto de Investigaciones Electricas (IIE) has been developing activities in this field since some years ago. In this paper, the process for the analysis of probabilistic fracture mechanics is described. As an example, an application to the calculation of fault probability in piping systems, is presented. [Espanol] Dada la importancia de la mecanica de fractura en aplicaciones de recipientes a presion, tuberias y otros componentes utilizados en centrales termicas, la Unidad de Ingenieria Mecanica del Instituto de Investigaciones Electricas (IIE) ha venido desarrollando actividades en este campo desde hace algunos anos. En el presente trabajo, se describe el proceso para el analisis de mecanica de fractura probabilista. Como ejemplo se presenta una aplicacion al calculo de probabilidad de falla en tuberias.

Asphaltenes in Mexican fuel oils; Asfaltenos en combustoleos mexicanos

Energy Technology Data Exchange (ETDEWEB)

Longoria Ramirez, Rigoberto [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1996-12-31

In this article the main aspects in which the Instituto de Investigaciones Electricas (IIE) has worked to contribute to the solution of problems due to the presence of asphaltenes in national fuel oils, are emphasized. The increment of these compounds, that concentrate harmful elements, in the last ten years has reached 22% by weight of the fuel oil. It is demonstrated that the quantification of asphaltenes depends on the type of solvent employed. [Espanol] En este articulo se subrayan los principales aspectos en los que el Instituto de Investigaciones Electricas (IIE) ha trabajado para contribuir a la solucion de problemas debidos a la presencia de asfaltenos en combustoleos nacionales. El incremento de estos compuestos, que concentran elementos nocivos, en los ultimos diez anos ha llegado hasta un 22% del peso del combustoleo. Se demuestra que la cuantificacion de los asfaltenos depende del tipo de solvente utilizado.

Probabilistic fracture mechanics in the integrity evaluation of components; Mecanica de fractura probabilista en la evaluacion de la integridad de componentes

Energy Technology Data Exchange (ETDEWEB)

Franco Nava, Jose Manuel; Torres Toledano, Jose Gerardo; Sanchez Sanchez, Ramon [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1997-12-31

Because of the importance of fracture mechanics in applications to pressure vessels, piping and other components used in thermal power plants, the Mechanical Engineering Unit of the Instituto de Investigaciones Electricas (IIE) has been developing activities in this field since some years ago. In this paper, the process for the analysis of probabilistic fracture mechanics is described. As an example, an application to the calculation of fault probability in piping systems, is presented. [Espanol] Dada la importancia de la mecanica de fractura en aplicaciones de recipientes a presion, tuberias y otros componentes utilizados en centrales termicas, la Unidad de Ingenieria Mecanica del Instituto de Investigaciones Electricas (IIE) ha venido desarrollando actividades en este campo desde hace algunos anos. En el presente trabajo, se describe el proceso para el analisis de mecanica de fractura probabilista. Como ejemplo se presenta una aplicacion al calculo de probabilidad de falla en tuberias.

Asphaltenes in Mexican fuel oils; Asfaltenos en combustoleos mexicanos

Energy Technology Data Exchange (ETDEWEB)

Longoria Ramirez, Rigoberto [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1997-12-31

In this article the main aspects in which the Instituto de Investigaciones Electricas (IIE) has worked to contribute to the solution of problems due to the presence of asphaltenes in national fuel oils, are emphasized. The increment of these compounds, that concentrate harmful elements, in the last ten years has reached 22% by weight of the fuel oil. It is demonstrated that the quantification of asphaltenes depends on the type of solvent employed. [Espanol] En este articulo se subrayan los principales aspectos en los que el Instituto de Investigaciones Electricas (IIE) ha trabajado para contribuir a la solucion de problemas debidos a la presencia de asfaltenos en combustoleos nacionales. El incremento de estos compuestos, que concentran elementos nocivos, en los ultimos diez anos ha llegado hasta un 22% del peso del combustoleo. Se demuestra que la cuantificacion de los asfaltenos depende del tipo de solvente utilizado.

Electric field and energy of a point electric charge between confocal hyperbolaidal electrodes

Energy Technology Data Exchange (ETDEWEB)

Ley-Koo, E. [Universidad Nacional Autonoma de Mexico, Mexico, D. F. (Mexico)

2001-06-01

The electric potential and intensity field, as well as the energy of a point electric charge between confocal hyperboloidal electrodes is evaluated as a superposition of prolate spheroidal harmonics using the Green-function technique. This study is motivated by the need to model the electric field between the tip and the sample in a scanning tunnelling microscope, and it can also be applied to a conductor-insulator-conductor junction. [Spanish] Los campos de potencial y de intensidad electrica, asi como la energia de una carga electrica puntual entre electrodos hiperboloidales confocales se evaluan como superposiciones de armonicos esferoidales prolatos usando la tecnica de la funcion de Green. Este estudio ha sido motivado por la necesidad de modelar el campo electrico entre la punta y la muestra de un microscopio de tunelamiento y barrido, y se puede aplicar tambien a una union de conductor-aislante-conductor.

Fuzzy control for the operation of an electrical energy generation system based on standard fuel cells PEM; Control difuso para la operacion de un sistema de generacion de energia electrica basado en celdas de combustible tipo PEM

Energy Technology Data Exchange (ETDEWEB)

Vazquez R, Miguel; Gutierrez A, Ruben [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico); Rodriguez P, Alejandro [Centro Nacional de Investigacion y Desarrollo Tecnologico (Cenidet), Cuernavaca, Morelos (Mexico)

2005-07-01

Fuel cells, as totally clean power plants, have many applications in the industry in general, in the transport system, in the electricity generation for domestic consumption and in the communication systems, among others. When developing new forms of generation with renewable energy sources, it must be considered that petroleum will stop in being an available power resource. The interest in the study of the fuel cells has been increased in the last years because it is considered a solution to the supply of distributed energy problem. Therefore, already exist research institutions that are developing work on this technology. A generation of electrical energy system based on fuel cells is a nonlinear system where the control of the variables of the process, such as the temperature of the system and the pressurization of the reactants, are an important aspect for its proper operation, since it influences in the water balance and therefore in the global efficiency of the system. [Spanish] Las celdas de combustible, como fuente de energia totalmente limpia, tienen muchas aplicaciones en la industria en general: en el sistema de transporte, en la generacion de electricidad para consumo domestico y en los sistemas de comunicacion, entre otros. Al desarrollar nuevas formas de generacion con fuentes de energia renovables, se debe considerar que el petroleo dejara de ser un recurso energetico disponible. El interes en el estudio de las celdas de combustible se ha incrementado en los ultimos anos debido a que se le considera una solucion al problema de abasto de energia distribuida. Por lo tanto, ya existen instituciones de investigacion que estan desarrollando trabajos sobre esta tecnologia. Un sistema de generacion de energia electrica basado en celdas de combustible es un sistema no lineal en donde el control de las variables del proceso, tales como la temperatura del sistema y la presurizacion de los reactantes, es un aspecto importante para su buen funcionamiento, ya que

Asociacion Espanola de la Industria Electrica (UNESA) annual report 2006. Information about electricity activities; Asociacion Espanola de la Industria Electrica UNESA 2006 memoria estadistica. Informe sobre las actividades electricas

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-07-01

The annual report of UNESA, the industrial grouping of major power companies in Spain, gives statistical data relating to power generation, transmission and distribution and a summary of achievements during 2006. Power is generated from fossil fuel, nuclear, and hydro power. Cooperation of UNESA with international organizations is reported. Detailed figures are given for electricity production during the year. A summary of the report is available in English and Spanish on the website www.unesa.es.

Computer electric design of synchronous generators; Diseno electrico de generadores sincronos por computadora

Energy Technology Data Exchange (ETDEWEB)

Patlan Frausto, Jose O; Acosta Aradillas, Juan [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1987-12-31

In this article are presented, in a conceptual manner the main elements that participate in the electric design of synchronous generators. Also, other options are presented for computers utilization as a design support. Afterwards, a computer program developed by the Instituto de Investigaciones Electricas (IIE) for the electric design of projecting poles generators is presented, oriented towards obtaining their electro-magnetic dimensioning. Finally, with the purpose of validating this program, the results obtained in a specific case, are presented. [Espanol] En este articulo se presentan, de manera conceptual, los principales elementos que participan en el proceso de diseno electrico de generadores sincronos. Tambien se plantean otras opciones para utilizar las computadoras como apoyo de diseno. Posteriormente, se describe un programa de computo desarrollado en el Instituto de Investigaciones Electricas (IIE) para el diseno electrico de generadores de polos salientes, orientado a obtener su dimensionamiento electromagnetico. Por ultimo, con el proposito de validar este programa, se presentan los resultados obtenidos en un caso particular.

The necessity of renovation of the fundamental concepts of geochemistry for the geothermal systems; La necesidad de renovacion de los conceptos fundamentales de geoquimica para los sistemas geotermicos

Energy Technology Data Exchange (ETDEWEB)

Mahendra Jaiswal, Pal Verma [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

1999-07-01

In this article the exhaustive experimentation of the compilation of the experimental data of quartz solubility is presented along with the saturation curve water - steam and in the zone of compressed liquid. On the base of these data a regression relation was derived, which is valid for the entire range of temperature from 0 to 374 Celsius degrees. This study was developed by Mahendra Pal Verma Jaiswal, researcher of the Instituto de Investigaciones Electricas (IIE) [Spanish] En este articulo se presenta el experimento exhaustivo de la recopilacion de los datos experimentales de la solubilidad de cuarzo a lo largo de la curva de saturacion agua - vapor y en la zona de liquido comprimido. Sobre la base de estos datos se derivo una relacion de regresion, la cual es valida para todo el rango de temperatura desde 0 a 374 grados Celsius. Este estudio fue desarrollado por Mahendra Pal Verma Jaiswal, investigador del Instituto de Investigaciones Electricas (IIE)

Atmospheric electric discharges and grounding systems; Descargas atmosfericas y sistemas de conexion a tierra

Energy Technology Data Exchange (ETDEWEB)

Rivas, Elena [ed.] [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

1999-07-01

In this article the work made by the Institute of Investigaciones Electricas (IIE), in the area of atmospheric electric discharges and grounding connections at Comision Federal de Electricidad (CFE) is presented. The work consisted of the revision of the procedures for the design of transmission lines and substations of CFE from which high indexes of interruptions are reported, from this, a program was defined that allowed to improve the existing designs in CFE. [Spanish] En este articulo se presenta el trabajo realizado por el Instituto de Investigaciones Electricas (IIE), en el area de descargas atmosfericas y conexiones a tierra en Comision Federal de Electricidad (CFE). El trabajo consistio en la revision de los procedimientos de diseno de las areas de transmision y subestaciones de la CFE para los que se reportan altos indices de salidas, a partir de esto se definio un programa que permitio mejorar los disenos existentes en la CFE.

Computer electric design of synchronous generators; Diseno electrico de generadores sincronos por computadora

Energy Technology Data Exchange (ETDEWEB)

Patlan Frausto, Jose O.; Acosta Aradillas, Juan [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1986-12-31

In this article are presented, in a conceptual manner the main elements that participate in the electric design of synchronous generators. Also, other options are presented for computers utilization as a design support. Afterwards, a computer program developed by the Instituto de Investigaciones Electricas (IIE) for the electric design of projecting poles generators is presented, oriented towards obtaining their electro-magnetic dimensioning. Finally, with the purpose of validating this program, the results obtained in a specific case, are presented. [Espanol] En este articulo se presentan, de manera conceptual, los principales elementos que participan en el proceso de diseno electrico de generadores sincronos. Tambien se plantean otras opciones para utilizar las computadoras como apoyo de diseno. Posteriormente, se describe un programa de computo desarrollado en el Instituto de Investigaciones Electricas (IIE) para el diseno electrico de generadores de polos salientes, orientado a obtener su dimensionamiento electromagnetico. Por ultimo, con el proposito de validar este programa, se presentan los resultados obtenidos en un caso particular.

Application of Geographic Information Systems for Rural Electrification with Renewable Energy: IntiGIS Model. Case of Study: Zapara Island, Zulia State. Venezuela; Aplicaciones de Sistemas de Informacion Geografica para la Electrificacion Rural con Energias Renovables: Modelo IntiGIS. Caso de Estudio: Isla Zapara, Estado Zulia. Venezuela

Energy Technology Data Exchange (ETDEWEB)

Rincon, L; Dominguez, J; Amador, J; Arribas, L; Pinedo, I

2011-07-01

This project started as an educational exercise for the Renewable Energy and Environment Master, taught by the Polytechnic University of Madrid, with the purpose of analyze in a real context GIS application in rural electrification with renewable energies. It was developed in collaboration with CIEMAT, ENELVEN (C.A. Energia Electrica de Venezuela), FUNDELEC (Fundacion para el Desarrollo del Servicio Electrico), CORPOLEC (Corporacion Electrica Nacional de Venezuela) and the UPM. The final aim is to define the technology that suits best to Zapara Islands electrification needs. This improvement will make possible the sustainable development of the population. In order to compare electrification technologies to decide which is the most suitable to Zapara Island, using IntiGIS model, will be required a geographic resources analysis, a population distribution and an electricity demand study. Also, it will be necessary to establish the technical parameters of the facility and economic factors that could affect the study. (Author) 14 refs.

Modern Radar Techniques for Geophysical Applications: Two Examples

Science.gov (United States)

Arokiasamy, B. J.; Bianchi, C.; Sciacca, U.; Tutone, G.; Zirizzotti, A.; Zuccheretti, E.

2005-01-01

The last decade of the evolution of radar was heavily influenced by the rapid increase in the information processing capabilities. Advances in solid state radio HF devices, digital technology, computing architectures and software offered the designers to develop very efficient radars. In designing modern radars the emphasis goes towards the simplification of the system hardware, reduction of overall power, which is compensated by coding and real time signal processing techniques. Radars are commonly employed in geophysical radio soundings like probing the ionosphere; stratosphere-mesosphere measurement, weather forecast, GPR and radio-glaciology etc. In the laboratorio di Geofisica Ambientale of the Istituto Nazionale di Geofisica e Vulcanologia (INGV), Rome, Italy, we developed two pulse compression radars. The first is a HF radar called AIS-INGV; Advanced Ionospheric Sounder designed both for the purpose of research and for routine service of the HF radio wave propagation forecast. The second is a VHF radar called GLACIORADAR, which will be substituting the high power envelope radar used by the Italian Glaciological group. This will be employed in studying the sub glacial structures of Antarctica, giving information about layering, the bed rock and sub glacial lakes if present. These are low power radars, which heavily rely on advanced hardware and powerful real time signal processing. Additional information is included in the original extended abstract.

33 CFR 165.755 - Safety Zone; Guayanilla, Puerto Rico

Science.gov (United States)

2010-07-01

... Zone; Guayanilla, Puerto Rico (a) The following area is established as a safety zone during the... the Eco-Electrica waterfront facility in Guayanilla Bay, Puerto Rico. The safety zone remains in... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Safety Zone; Guayanilla, Puerto...

Environmental impact of the programs of substitution of room type air conditioning equipment; Impacto ambiental de los programas de sustitucion de equipos de aire tipo cuarto

Energy Technology Data Exchange (ETDEWEB)

Alarcon Aleman, Jose Mauricio [OLADE, Quito (Ecuador)

2002-09-01

The present article approaches in a general way the relation that exists between the environment and the saving of electrical energy, especially in the Programs of Demand Side Management (DSM). In particular form the potential environmental impacts are described, derived of the use and the discard of the room type air conditioning equipment, goes deep into the characteristics of their cooling fluids, as well as in the relation that these keep with the protocols of Montreal and Kyoto. Finally, this article comments the incidence which have, the manufacturers as the institutions that implement DSM programs, on the environmental part of the programs of substitution of room type air conditioning equipment. In addition it is briefly described, the pilot program developed by Fideicomiso para el Ahorro de Energia Electrica (FIDE) as a successful case. [Spanish] En forma general, el presente articulo aborda la relacion que existe entre el medio ambiente y el ahorro de energia electrica, especialmente en los Programas de Administracion por el Lado de la Demanda (ALD). En forma particular se describen los impactos ambientales potenciales, derivados del uso y desecho de los equipos de aire acondicionado tipo cuarto, se ahonda en las caracteristicas de sus refrigerantes, asi como en la relacion que estos guardan con los protocolos de Montreal y Kioto. Finalmente, se comenta la incidencia que tienen, tanto los fabricantes como las instituciones que implementan programas de ALD, sobre la parte ambiental de los programas de sustitucion de equipos de aire acondicionado tipo cuarto. Ademas se describe brevemente, el programa piloto desarrollado por el Fideicomiso para el Ahorro de Energia Electrica (FIDE) como un caso exitoso.

Energy conservation programs of Pemex exploration and production, south region; Programas de ahorro de energia en Pemex exploracion y produccion, region sur

Energy Technology Data Exchange (ETDEWEB)

Gonzalez Milla, Guillermo; Garcia Juarez, Francisco; Alarcon Aleman, Jose Mauricio [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1999-12-31

The technological developments of energy economizing equipment constitute a powerful tool for the conservation and saving of the electric energy in new or existing installations. Petroleos Mexicanos (PEMEX) Exploration and Production initiated in 1997 a program for energy economizing in the South region, for which the Instituto de Investigaciones Electricas, through its Unit for the Use of Energy, collaborated performing energy assessments in 115 buildings of the above mentioned region. This paper describes the employed methodology to carry on the energy assessment, which consisted in an analysis of each building and different options for energy economizing were presented, which was accompanied with cost-benefit studies. The results obtained show that the air conditioning equipment and lighting represent the most important loads permanently connected, therefore the study was concentrated in these two loads [Espanol] Los desarrollos tecnologicos de equipos ahorradores de energia constituyen una poderosa herramienta para la conservacion y el ahorro de energia electrica en instalaciones nuevas o existentes. Petroleos Mexicanos (PEMEX) Exploracion y Produccion inicio en 1997 un programa para el ahorro de energia en la region sur, para lo cual el Instituto de Investigaciones Electricas, a traves de la Unidad de Uso de Energia, colaboro realizando diagnosticos energeticos en 115 edificios de dicha region. En este documento se describe la metodologia utilizada para realizar el diagnostico energetico, el cual consistio en un analisis de cada edificio y se presentaron diversas opciones para ahorrar energia, lo cual se acompano de estudios de costo-beneficio. Los resultados obtenidos muestran que los equipos de aire acondicionado e iluminacion representan la parte mas importante de las cargas conectadas permanentemente, por lo que el estudio se concentro en estas dos cargas

Energy conservation programs of Pemex exploration and production, south region; Programas de ahorro de energia en Pemex exploracion y produccion, region sur

Energy Technology Data Exchange (ETDEWEB)

Gonzalez Milla, Guillermo; Garcia Juarez, Francisco; Alarcon Aleman, Jose Mauricio [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1998-12-31

The technological developments of energy economizing equipment constitute a powerful tool for the conservation and saving of the electric energy in new or existing installations. Petroleos Mexicanos (PEMEX) Exploration and Production initiated in 1997 a program for energy economizing in the South region, for which the Instituto de Investigaciones Electricas, through its Unit for the Use of Energy, collaborated performing energy assessments in 115 buildings of the above mentioned region. This paper describes the employed methodology to carry on the energy assessment, which consisted in an analysis of each building and different options for energy economizing were presented, which was accompanied with cost-benefit studies. The results obtained show that the air conditioning equipment and lighting represent the most important loads permanently connected, therefore the study was concentrated in these two loads [Espanol] Los desarrollos tecnologicos de equipos ahorradores de energia constituyen una poderosa herramienta para la conservacion y el ahorro de energia electrica en instalaciones nuevas o existentes. Petroleos Mexicanos (PEMEX) Exploracion y Produccion inicio en 1997 un programa para el ahorro de energia en la region sur, para lo cual el Instituto de Investigaciones Electricas, a traves de la Unidad de Uso de Energia, colaboro realizando diagnosticos energeticos en 115 edificios de dicha region. En este documento se describe la metodologia utilizada para realizar el diagnostico energetico, el cual consistio en un analisis de cada edificio y se presentaron diversas opciones para ahorrar energia, lo cual se acompano de estudios de costo-beneficio. Los resultados obtenidos muestran que los equipos de aire acondicionado e iluminacion representan la parte mas importante de las cargas conectadas permanentemente, por lo que el estudio se concentro en estas dos cargas

Evaluation of the reliability of electric power transmission systems; Evaluacion de confiabilidad de sistemas de transmision de energia electrica

Energy Technology Data Exchange (ETDEWEB)

Vega Ortiz, Miguel

1989-07-01

algorithm in a digital program, this was proved in a personal computer applying it to IEEE transmission systems evaluated with other methods, among them one of 140 buses and 199 transmission lines. The results as far as reliability indexes compared with the other methods were very satisfactory and promising as far as required CPU time and memory for larger systems. [Spanish] En esta tesis se ataca el problema de la Evaluacion de la Confiabilidad de los Sistemas de Transmision de Energia Electrica para fines de su planeacion integral. Una vez descrito el problema se presentan los indices que miden la confiabilidad de los sistemas electricos de potencia. Despues se describen los metodos para evaluar las redes de transmision, como el de Enumeracion de Contingencias, el Monte Carlo, el de Markov y los metodos para sistemas complejos como el de Cortes Minimos. Este ultimo se desarrolla ampliamente por las ventajas que presenta su aplicacion en la planeacion de redes grandes y complejas. El metodo de cortes minimos consta de dos grandes pasos: Determinar los cortes minimos para los puntos de carga y calcular los indices de confiabilidad en base a los cortes minimos. Los algoritmos convencionales para la determinacion de cortes minimos consideran un problema por cada punto de carga en forma independiente pasando por una determinacion de caminos minimos. En este tipo de algoritmos el tiempo de CPU y el espacio en memoria requeridos crecen exponencialmente para el caso de sistemas de transmision grandes, lo que representa una fuerte restriccion para su aplicacion. Para resolver este problema se establecio una metodologia en la que se modela el sistema por medio de un grafo y se determinan los cortes minimos con un algoritmo basado en la construccion de ciclos en el grafo dual. Con estos cortes se evalua la conexidad y capacidad de la red, obteniendose los indices de confiabilidad para cada bus y para el sistema. Estos indices se calculan con la representacion equivalente para

Contribuição ao desenvolvimento de tecnologia de fabricação de celulas solares utilizando "dopant papers"

OpenAIRE

Alexandre Guass Junior

1995-01-01

Resumo: Este trabalho teve como objetivo o desenvolvimento de um conjunto de processos de baixo custo para fabricação de células solares. As células solares foram fabricadas utilizando lâminas de silício monocristalino, com orientação cristalografica e resistividade típica de 4.1 à 9.0 ohm.cm, tipo p dopadas com boro. Ajunção n-p foi obtida por difusão usando papéis dopantes. Estes papéis são de dois tipos, os que possuem boro e os com fósforo.A montagem de um conjunto de lâminas de s...

Geo economical studies of Mina Florencia (Fluorite)

International Nuclear Information System (INIS)

Gomez Rifas, C.; Mari, C.; Theune, C.; Bosse, R.

1982-01-01

This report describes the works of Prospecting of Fluorite in Mina Florencia, in Maldonado Province. The project began in January of 1981, with the elaboration of a regional geologic cartography scale 1/20.000 of an area of 90,85 kilometers and cartography detailed scale 1/5.000 of the immediate area to Mina Florencia (6 kilometer that demonstrated the existence other veins of similar characteristic of the mine in exploration. Later on they were carried out geophysical studies (resistividad and electromagnetism, under the direction of the geophysical Fritz R. Haut of the BGR). The main geophysical anomalies inside the mining concession was studied by mechanical well, which results were showed in this report.

Application of an evolutionary algorithm in the reactive compensation of transmission networks of electrical energy planning; Aplicacion de un algoritmo evolutivo en la planificacion de la compensacion reactiva de redes de transmision de energia electrica

Energy Technology Data Exchange (ETDEWEB)

Hernandez Galicia, Julio A.; Nieva Gomez, Rolando [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

2001-07-01

In the present work it is considered the mathematical formulation of the problem of the reactive compensation planning, The solution technique based on evolutionary programming is described and the results of compensation in the Northwest subsystem of the Mexican electrical system are shown. A technique of optimization based on the Evolutionary Programming is proposed to solve the problem of the Planning of the Reactive Compensation in transmission of electrical energy networks. The problem consists in determining how much compensation to add and where to locate it in such a way that the investment cost of the compensation equipment is diminished, plus the operation costs associated to the transmission losses, plus a penalty function associated to the violations of the operative limits of voltage. The compensation that is determined must allow that the network operates in normal conditions before any contingency of a pre-established assembly. The problem considered is non-linear and whole compound. Tests made to a representative system of the Northwest area of the Mexican electrical system of 171 nodes and 284 branches are reported. [Spanish] En el presente trabajo se plantea la formulacion matematica del problema de planificacion de la compensacion reactiva, se describe la tecnica de solucion basada en programacion evolutiva y se muestra resultados de compensacion en el subsistema Noroeste del sistema electrico mexicano. Se propone una tecnica de optimizacion basada en la Programacion Evolutiva para resolver el problema de la Planificacion de la Compensacion Reactiva en redes de transmision de energia electrica. El problema consiste en determinar cuanta compensacion agregar y donde ubicarla de tal manera que se minimice el costo de inversion del equipo de compensacion, mas los costos de operacion asociados a las perdidas de transmision, mas una funcion de penalizacion asociada a la violaciones de los limites operativos de voltaje. La compensacion que se determine

Installation of a very broad band borehole seismic station in Ferrara (Emilia)

OpenAIRE

Pesaresi, Damiano; Dall'Olio, Lorella; Rovelli, Antonio; Romanelli, Marco; Barnaba, Carla; Abu Zeid, Nasser

2012-01-01

The Istituto Nazionale di Geofisica e Vulcanologia (INGV) is the Italian agency devoted to monitor in real time the seismicity on the Italian territory. The seismicity in Italy is of course variable in time and space, being also very much dependant on local noise conditions. Specifically, monitoring seismicity in an alluvial basin like the Po one is a challenge, due to consistent site effects induced by soft alluvial deposits and bad coupling with the deep bedrock (Steidl et al., 1996). This...

Control integral systems; Sistemas integrales de control

Energy Technology Data Exchange (ETDEWEB)

Burgos, Estrella [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1999-12-31

Almost two third of the electric power generation in Mexico are obtained from hydrocarbons, for that reasons Comision Federal de Electricidad (CFE) dedicated special commitment in modernizing the operation of fossil fuel central stations. In attaining this objective the control systems play a fundamental roll, from them depend a good share of the reliability and the efficiency of the electric power generation process, as well as the extension of the equipment useful life. Since 1984 the Instituto de Investigaciones Electricas (IIE) has been working, upon the request of CFE, on the development of digital control systems. To date it has designed and implemented a logic control system for gas burners, which controls 32 burners of the Unit 4 boiler of the Generation Central of Valle de Mexico and two systems for distributed control for two combined cycle central stations, which are: Dos Bocas, Veracruz Combined cycle central, and Gomez Palacio, Durango combined cycle central. With these two developments the IIE enters the World tendency of implementing distributed control systems for the fossil fuel power central update [Espanol] Casi las dos terceras partes de la generacion electrica en Mexico se obtienen a partir de hidrocarburos, es por eso que la Comision Federal de Electricidad (CFE) puso especial empeno en modernizar la operacion de las centrales termoelectricas de combustibles fosiles. En el logro de este objetivo los sistemas de control desempenan un papel fundamental, de ellos depende una buena parte la confiabilidad y la eficiencia en el proceso de generacion de energia electrica, asi como la prolongacion de la vida util de los equipos. Desde 1984 el Instituto de Investigaciones Electricas (IIE) ha trabajado, a solicitud de la CFE, en el desarrollo de sistemas digitales de control. A la fecha se han disenado e implantado un sistema de control logico de quemadores de gas, el cual controla 32 quemadores de la caldera de la unidad 4 de la central de generacion

Control integral systems; Sistemas integrales de control

Energy Technology Data Exchange (ETDEWEB)

Burgos, Estrella [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1998-12-31

Almost two third of the electric power generation in Mexico are obtained from hydrocarbons, for that reasons Comision Federal de Electricidad (CFE) dedicated special commitment in modernizing the operation of fossil fuel central stations. In attaining this objective the control systems play a fundamental roll, from them depend a good share of the reliability and the efficiency of the electric power generation process, as well as the extension of the equipment useful life. Since 1984 the Instituto de Investigaciones Electricas (IIE) has been working, upon the request of CFE, on the development of digital control systems. To date it has designed and implemented a logic control system for gas burners, which controls 32 burners of the Unit 4 boiler of the Generation Central of Valle de Mexico and two systems for distributed control for two combined cycle central stations, which are: Dos Bocas, Veracruz Combined cycle central, and Gomez Palacio, Durango combined cycle central. With these two developments the IIE enters the World tendency of implementing distributed control systems for the fossil fuel power central update [Espanol] Casi las dos terceras partes de la generacion electrica en Mexico se obtienen a partir de hidrocarburos, es por eso que la Comision Federal de Electricidad (CFE) puso especial empeno en modernizar la operacion de las centrales termoelectricas de combustibles fosiles. En el logro de este objetivo los sistemas de control desempenan un papel fundamental, de ellos depende una buena parte la confiabilidad y la eficiencia en el proceso de generacion de energia electrica, asi como la prolongacion de la vida util de los equipos. Desde 1984 el Instituto de Investigaciones Electricas (IIE) ha trabajado, a solicitud de la CFE, en el desarrollo de sistemas digitales de control. A la fecha se han disenado e implantado un sistema de control logico de quemadores de gas, el cual controla 32 quemadores de la caldera de la unidad 4 de la central de generacion

Program integration at JVC Industrial de Mexico, S.A. de C.V./Electric energy saving/Environmental management system /ISO 14001 standard; Integracion de programas en JVC Industrial de Mexico, S.A. de C.V. Ahorro de energia electrica/Sistema de administracion ambiental/Estandar ISO 14001

Energy Technology Data Exchange (ETDEWEB)

Argote Molina, Martin [JVC Industrial de Mexico S. A. de C. V., Tijuana (Mexico)

1998-12-31

It is possible, and besides logic, the integration of programs such as the electric energy saving and an environmental management system. In managing the consumption and the demand of the electric service, there is an effect on the pollutants emitted for the generation. It is clear that the user in not, and can not be, responsible for the type of fuel used but its importance in project planning is out of question. In its turn the central point of the environmental management system, consists in identifying the main effects on the environment caused by its activities, services and products, as well as the current or potential control level of the enterprise on them. Such identification and further evaluation took us at JVC Industrial de Mexico, to integrate conceptually and operationally such programs. The commitment with the Management was concentrated and strengthened resulting in a fuller consciousness of resource administration. [Espanol] Es posible, ademas de logica, la integracion de programas tales como el ahorro de energia electrica y un sistema de administracion ambiental. Al administrar el consumo y la demanda del servicio electrico tenemos un efecto en los contaminantes emitidos para la generacion. Es claro que el usuario no es, ni puede ser, responsable del tipo de combustible utilizado pero su importancia en la planeacion de proyectos es indiscutible. A su vez el punto central del sistema de administracion ambiental, consiste en identificar los principales efectos en el medio ambiente causados por sus actividades, servicios o productos, asi como el nivel de control actual o potencial de la empresa sobre ellos. Dicha identificacion y la posterior evaluacion nos llevo, en JVC Industrial de Mexico, a integrar tanto conceptual como operacionalmente dichos programas. El compromiso de la Gerencia se vio concentrado y fortalecido dando como resultado una conciencia mas plena de la administracion de recursos.

Program integration at JVC Industrial de Mexico, S.A. de C.V./Electric energy saving/Environmental management system /ISO 14001 standard; Integracion de programas en JVC Industrial de Mexico, S.A. de C.V. Ahorro de energia electrica/Sistema de administracion ambiental/Estandar ISO 14001

Energy Technology Data Exchange (ETDEWEB)

Argote Molina, Martin [JVC Industrial de Mexico S. A. de C. V., Tijuana (Mexico)

1999-12-31

It is possible, and besides logic, the integration of programs such as the electric energy saving and an environmental management system. In managing the consumption and the demand of the electric service, there is an effect on the pollutants emitted for the generation. It is clear that the user in not, and can not be, responsible for the type of fuel used but its importance in project planning is out of question. In its turn the central point of the environmental management system, consists in identifying the main effects on the environment caused by its activities, services and products, as well as the current or potential control level of the enterprise on them. Such identification and further evaluation took us at JVC Industrial de Mexico, to integrate conceptually and operationally such programs. The commitment with the Management was concentrated and strengthened resulting in a fuller consciousness of resource administration. [Espanol] Es posible, ademas de logica, la integracion de programas tales como el ahorro de energia electrica y un sistema de administracion ambiental. Al administrar el consumo y la demanda del servicio electrico tenemos un efecto en los contaminantes emitidos para la generacion. Es claro que el usuario no es, ni puede ser, responsable del tipo de combustible utilizado pero su importancia en la planeacion de proyectos es indiscutible. A su vez el punto central del sistema de administracion ambiental, consiste en identificar los principales efectos en el medio ambiente causados por sus actividades, servicios o productos, asi como el nivel de control actual o potencial de la empresa sobre ellos. Dicha identificacion y la posterior evaluacion nos llevo, en JVC Industrial de Mexico, a integrar tanto conceptual como operacionalmente dichos programas. El compromiso de la Gerencia se vio concentrado y fortalecido dando como resultado una conciencia mas plena de la administracion de recursos.

Development of a Publications and Conferences Data Base in the Mexican Electric Power Research Institute.

Science.gov (United States)

Ripoll, C. Lopez Cerdan; And Others

This paper describes the development by the Mexican Electric Power Research Institute (Instituto de Investigaciones Electricas or IIE) over a 10-year period of a publications and conferences database (PCDB) of research and development output of the institute. The paper begins by listing the objectives of the database and describing data coverage…

Specification for the interconnection to a electric network of low tension of photovoltaic systems with 30 kW of capacity; Especificacion para la interconexion a la red electrica de baja tension de sistemas fotovoltaicos con capacidad hasta 30kW

Energy Technology Data Exchange (ETDEWEB)

Garcia Gutierrez, Jose [Comision Federal de Electricidad, Mexico (Mexico)

2007-06-15

In this presentation, there are shown the details of the photovoltaic systems interconnected with the electric network (SFVI), carried out by the Mexico's Federal Electricity Commission (CFE) with the support of the Mexican Electric Research Institute (IIE). First of all, there are found the objectives of the photovoltaic system interconnected to the electric network (SFVI). Then, there are mentioned the places where such sort of systems could be installed; besides, it is shown a diagram explaining the process of such systems. At the same time, there are briefly explained the components that are necessaries for their properly operation. Some of the elements previously mentioned are: photovoltaic generator (GFV), inverter, interface, and logic circuits and the control. It is shown a diagram with the location of the electrical disconnect switches. Then, it is shortly explained the place where the SFVI should be connected and there are given some requisites that are important to fulfill in order to have everything updated. Finally, it is mentioned the methodology that should be followed in order to supervise that everything works in a properly way, this last issue is carried out by CFE. [Spanish] En esta presentacion se presentan los pormenores del sistema fotovoltaico interconectado a la red (SFVI), realizado por la Comision federal de Electricidad (CFE) con apoyo del Instituto de Investigaciones Electricas (IIE). En primer lugar, se encuentran los objetivos que tiene el uso de SFVI. Enseguida, se muestra un diagrama que explica el proceso que dichos sistemas realizan. Asimismo, se explican brevemente los elementos que, de uno u otro modo, son necesarios para el adecuado funcionamiento del SFV. Ademas, se muestra un diagrama con la ubicacion de los interruptores de desconexion. Luego, se explica escuetamente el lugar donde se debe de conectar el SFVI, ademas de algunas condiciones que se deben de cumplir para que no haya mayores contratiempos. Finalmente, se

Co-generation system with integrated functions of active filter; Sistema de cogeneracion con funciones de filtro activo integradas

Energy Technology Data Exchange (ETDEWEB)

Jimenez Grajales, Humberto Raul

2002-07-15

adaptive interference. This technique maintains the system in the best functional state, by means of continuous self adjustment facing changes in the operation parameters, generating important and satisfactory results. In addition, simultaneously the PVS uses, in the pursuit of the point of maximum power, the technique of {sup d}isturb and observe{sup ,} which offers a high performance in the injection of active power. [Spanish] Sin duda, la energia electrica es la forma de energia mas ampliamente usada en las actividades economicas y sociales de nuestro mundo moderno. Por ello, se puede decir que las companias generadoras y distribuidoras de electricidad asumen dos retos de relevante preocupacion actual. Uno es generar con mayor eficiencia, menor costo y con un minimo impacto sobre el medio ambiente. El segundo es cumplir con la calidad del suministro, que ha llegado a ser un punto importante tanto para los usuarios como para las companias que distribuyen la energia electrica, y que se refleja en una distribucion y un consumo de energia mas eficiente. El trabajo de tesis que se presenta, describe un sistema fotovoltaico (SFV) interconectado a la red electrica que ayuda a superar los retos citados. Este SFV tiene la funcion de recibir la energia solar entregada por un arreglo de celdas FV; operar en el punto maximo de potencia de las celdas (para mayor aprovechamiento de la energia captada); acondicionarla a una senal alterna, dentro de los parametros tecnicos normativos para la interconexion electrica (establecidos por la compania; Comision Federal de Electricidad en Mexico); e inyectarla a la red electrica con el proposito de compensar potencia reactiva (filtrado activo) demandada por cargas lineales y no lineales, reduciendo la contaminacion de la red electrica; ademas de compensar potencia activa en los picos de demanda de energia electrica maxima. El sistema funciona como filtro activo durante todo el dia, lo que permite que la capacidad de potencia instalada por el

Calculate the high solar radiation for photovoltaic panels in Chile; Aproximacio al calculo de la oferta de energia por paneles fotovoltaicos en Chile

Energy Technology Data Exchange (ETDEWEB)

Cancino, Beatriz; Roth, Pedro; Stolz, German [Universidad Tecnica Federico Santa Maria, Valparaiso (Chile); Bonneschky, Alexis [Cottbus University, Cottbus (Germany)

2000-07-01

The aim of this work was to develop a method which permits to calculate and predict the theoretically possible electrical energy which can be obtained in different places in Chile with photovoltaic panels used in solar home systems. Chile is a country with a high solar radiation, specially in its northern part, between parallels 18 degrees with a daily mean energy of 4600 Wh/m{sup 2} over the year and 37 degrees, with 3700 Wh/m{sup 2}. Therefore, the use of photovoltaic power is an interesting alternative to be studied and used. Nevertheless, the photovoltaic possibilities have not been studied and no evaluation of real possibilities exist. In a previous paper, the absence of an installation guide for solar home systems have been mentioned. And also the lack of information regarding the real electrical energy needs of people. This work pretends to be the first approximation to a detailed chart and list of possible electric supplies using photovoltaic panels in different locations of Chile. It is made with a computer program which permits to calculate the solar radiation on a tilted surface, on a hourly bases. It uses geographical data and the daily average of monthly radiation. Therefore, the hourly energy, harnessed by the panel can be established and the total energy for some place calculated. [Spanish] El objetivo de este trabajo, es el de mostrar a traves de un listado y un mapa nacional, la cantidad teorica de energia electrica que puede ser obtenida a traves del uso de paneles fotovoltaicos principalmente destinados a Solar Home System (SHS) en Chile. Chile es un pais con una alta oferta de energia solar ubicada principalmente en la zona norte y centro del pais, aproximadamente entre los paralelos 18 grados (sobre 4600 Wh/m{sup 2} dia promedio anual) y 37 grados Sur (sobre 3700 Wh/m{sup 2} dia promedio anual). Por lo que el uso de paneles fotovoltaicos representa una alternativa interesante de ser estudiada y aprovechada. Sin embargo, no existe una evaluacion

Evaluation of a process for the removal of gases contained in geothermal steam through condensation and re-evaporation; Evaluacion de un proceso de remocion de gases contenidos en el vapor geotermico, por medio de la condensacion y de revaporacion

Energy Technology Data Exchange (ETDEWEB)

Angulo C, Raul; Lam Rea, Luis; Garmino, Hector; Jimenez, Humberto [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1986-12-31

The Cerro Prieto I Geothermal Field, developed and operated by the Comision Federal de Electricidad (CFE), has currently an installed electric power generation capacity of 180 MW and is at a very advanced stage in the development of Cerro Prieto II and III, which will allow to raise the generation capacity to 620 MW. During the exploitation of a geothermal field, in producing steam with the purpose of generating electricity, brines and waste gases are obtained. The hydrogen sulfide exhaust to the environment implies pollution problems, for this reason processes have been developed for the oxidation of these gases downstream the turbogenerator either in the flow of separated gases in the steam condensation or in the condensate produced. The Instituto de Investigaciones Electricas (IIE) has collaborated with CFE in the evaluation of the environmental impact of this gas and in the development of the processes for its abatement. [Espanol] El campo geotermico de Cerro Prieto I, desarrollado y operado por la Comision Federal de Electricidad (CFE), actualmente tiene una capacidad instalada de generacion de energia electrica de 180 MW, y se encuentra en etapa muy avanzada, el desarrollo de Cerro Prieto II y III, lo que permitira incrementar la capacidad de generacion a 620 MW. Durante la explotacion de un campo geotermico, al producir vapor con el proposito de generar electricidad, se obtienen salmueras y gases de desecho. La descarga de acido sulfhidrico a la atmosfera implica problemas de contaminacion, por esta razon se han desarrollado procesos para la oxidacion de este gas aguas abajo de la turbina generadora, ya sea en la corriente de gases que se separan en la condensacion del vapor o en el condensado producido. El Instituto de Investigaciones Electricas (IIE) ha colaborado con la CFE en la evaluacion del impacto ambiental de este gas y en el desarrollo de sus procesos de abatimiento.

Energy efficiency and restructuring of the Brazilian power sector

Energy Technology Data Exchange (ETDEWEB)

De Martino Jannuzzi, Gilberto [State University of Campinas, Sao Paulo, (Brazil)

1999-07-01

Since the early nineties Brazil has initiated a program of reforms in its electric sector which includes utility privatization, de-verticalization. The main objectives were to promote a market-oriented energy industry attractive to private investments. This has led to the loss of sponsorship for the public-interest programs formerly undertaken by the state utilities. In particular, of significant concern are the programs for promotion of energy efficiency, renewable energy technologies, rural electrification and environmental protection. In the midst of the privatization effort, the National Agency for Electrical Energy ANEEL was created (end of 1997). One of the tasks of the regulatory agency is to provide funds and incentives to energy conservation. In this paper we review the role of ANEEL in promoting energy efficiency investments in the context of a market-oriented sector, its limitations and prospects. [Spanish] Desde principios de los anos noventa Brasil ha iniciado un programa de reformas en su sector electrico que incluye la privatizacion del servicio electrico y la desverticalizacion. Los objetivos principales eran promover una industria de la energia orientada comercialmente de la energia electrica, atractiva a las inversiones privadas. Esto ha conducido a la perdida de patrocinio de los programas de interes publico emprendidos antes por las empresas electricas del estado. En particular, de preocupacion significativa estan los programas para la promocion del rendimiento energetico, de las tecnologias de la energia renovable, de la Electrificacion rural y de la proteccion del medio ambiente. En medio del esfuerzo de la privatizacion, la agencia nacional para la energia electrica ANEEL fue creada (finales de 1997). Una de las tareas de la agencia reguladora es proporcionar fondos e incentivos a la conservacion de energia. En este trabajo repasamos el papel de ANEEL en promover inversiones del rendimiento energetico en el contexto de un sector orientado

Evaluation of a process for the removal of gases contained in geothermal steam through condensation and re-evaporation; Evaluacion de un proceso de remocion de gases contenidos en el vapor geotermico, por medio de la condensacion y de revaporacion

Energy Technology Data Exchange (ETDEWEB)

Angulo C, Raul; Lam Rea, Luis; Garmino, Hector; Jimenez, Humberto [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1985-12-31

The Cerro Prieto I Geothermal Field, developed and operated by the Comision Federal de Electricidad (CFE), has currently an installed electric power generation capacity of 180 MW and is at a very advanced stage in the development of Cerro Prieto II and III, which will allow to raise the generation capacity to 620 MW. During the exploitation of a geothermal field, in producing steam with the purpose of generating electricity, brines and waste gases are obtained. The hydrogen sulfide exhaust to the environment implies pollution problems, for this reason processes have been developed for the oxidation of these gases downstream the turbogenerator either in the flow of separated gases in the steam condensation or in the condensate produced. The Instituto de Investigaciones Electricas (IIE) has collaborated with CFE in the evaluation of the environmental impact of this gas and in the development of the processes for its abatement. [Espanol] El campo geotermico de Cerro Prieto I, desarrollado y operado por la Comision Federal de Electricidad (CFE), actualmente tiene una capacidad instalada de generacion de energia electrica de 180 MW, y se encuentra en etapa muy avanzada, el desarrollo de Cerro Prieto II y III, lo que permitira incrementar la capacidad de generacion a 620 MW. Durante la explotacion de un campo geotermico, al producir vapor con el proposito de generar electricidad, se obtienen salmueras y gases de desecho. La descarga de acido sulfhidrico a la atmosfera implica problemas de contaminacion, por esta razon se han desarrollado procesos para la oxidacion de este gas aguas abajo de la turbina generadora, ya sea en la corriente de gases que se separan en la condensacion del vapor o en el condensado producido. El Instituto de Investigaciones Electricas (IIE) ha colaborado con la CFE en la evaluacion del impacto ambiental de este gas y en el desarrollo de sus procesos de abatimiento.

Condensers for measuring steam quality at the inlet of back-pressure units of the Los Azufres, Mich., geothermal field; Condensadores para medir la calidad del vapor a la entrada de las turbinas a contrapresion del campo geotermico de Los Azufres, Mich.

Energy Technology Data Exchange (ETDEWEB)

Sandoval Medina, Fernando; Gonzalez Gonzalez, Rubi; Reyes Delgado, Lisette; Medina Martinez, Moises [Comision Federal de Electricidad, Gerencia de Proyectos Geotermoelectricos, Residencia de Los Azufres (Mexico)]. E-mail: fernando.sandoval@cfe.gob.mx

2007-01-15

Electrical conductivity is an indirect measurement of the quality of the steam supplied to power units. In the Los Azufres, Mich., geothermal field, the electrical conductivity once was measured in a discrete and periodic way by condensing steam samples through a water-cooled condenser. In an attempt to continuously measure conductivity, conductivity meters were installed where the units discharged, but the values proved unstable and unrepresentative. Thereafter, taking into account that steam quality should be measured at the steam delivery-reception point, equipment was designed and tested for continuously condensing steam. Finally it was possible to get an air-cooled condenser able to condense 500 milliliters per minute, enough to collect a representative flow of the steam and to measure its electrical conductivity. The equipment was installed in all seven back-pressure units operating in the field and to date has been operating in an optimal manner. [Spanish] La conductividad electrica es una medida indirecta de la calidad del vapor que se suministra a las unidades turbogeneradoras. En el campo geotermico de Los Azufres, Mich., la conductividad electrica se media en forma puntual y periodica, condensando muestras de vapor por medio de un serpentin enfriado con agua. Despues, ante la necesidad de medirla en forma continua, se instalaron conductivimetros en las descargas de las unidades, pero los valores resultaron muy inestables y poco representativos. Considerando, ademas, que la calidad del vapor debe medirse en el punto de entrega-recepcion, se disenaron y probaron equipos para condensar vapor de manera continua, lograndose construir un condensador enfriado por aire que logra condensar un flujo de 500 mililitros por minuto, cantidad suficiente para tener un flujo representativo del vapor que alimenta a las turbinas y medirle su conductividad electrica. Se instalaron estos equipos en las siete unidades turbogeneradoras a contrapresion que funcionan en el campo

Industrial manufacturing of electric insulators; Fabricacion industrial de aisladores electricos

Energy Technology Data Exchange (ETDEWEB)

Gonzalez, Lucia [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1988-12-31

Porcelain is the insulating material more extensively used for electric insulators manufacturing, due to its dielectric properties; nevertheless, it presents fragility problems of manufacture and of resistance to the thermal shock, among others. For this reason studies are being conducted for the substitution of porcelain in the electric insulators manufacturing. In this area, the Instituto de Investigaciones Electricas developed an improved insulating formulation - the polymeric concrete- and an industrial prototype machine for the manufacture of high voltage electric insulators for outdoors use. [Espanol] La porcelana es el material aislante electrico mas utilizado en la elaboracion de aisladores electricos, debido a sus propiedades dielectricas; sin embargo, presenta problemas de fragilidad, de fabricacion y de baja resistencia al choque termico, entre otros. Es por ello que se realizan estudios para sustituir la porcelana en la fabricacion de aisladores electricos. En este campo, el Instituto de Investigaciones Electricas desarrollo una formulacion aislante mejorada -el concreto polimerico- y una maquina prototipo industrial para fabricar aisladores electricos de alto voltaje para uso en exteriores.

Submersible pumps: Energetic efficiency norm; Bombas sumergibles: norma de eficiencia energetica

Energy Technology Data Exchange (ETDEWEB)

Acosta Torres, R. A.; Buendia Dominguez, E. H. [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1997-12-31

The Instituto de Investigaciones Electricas (IIE), supporting the Comision Nacional para el Ahorro de Energia (CONAE), has prepared a preliminary project of the norm of energy efficiency for submersible pumps. This document has complied with the necessary formalities for the emission of the norm. This paper presents the results of the analysis of the submersible pumps, the energy savings, as well as the economic evaluation that sustains the norm project, additionally pointing out the environmental impact that will bring along the implantation of the same. [Espanol] El Instituto de Investigaciones Electricas (IIE), apoyando a la Comision Nacional para el Ahorro de Energia (CONAE), ha elaborado el anteproyecto de norma de eficiencia energetica para bombas sumergibles. Dicho documento ha cumplido con los tramites necesarios para la emision de una norma. En el presente articulo se mencionan los resultados del analisis de las bombas sumergibles, los ahorros energeticos, asi como la evaluacion economica que sustenta el proyecto de norma, indicandose ademas el impacto ambiental que tendra la implantacion de la misma.

Use of efficient technologies in the lighting system for new constructions in hotels; Utilizacion de tecnologias eficientes en el sistema de iluminacion para nuevas construcciones en hoteles

Energy Technology Data Exchange (ETDEWEB)

Duran Ramirez, Ricardo [Fideicomiso para el Ahorro de la Energia Electrica (Mexico)

2005-01-15

The Fideicomiso para el Ahorro de la Energia Electrica (FIDE) jointly worked with two hotels in construction modifying the original projects of the lighting system to obtain a suitable selection of lamps and lighting control subsystems that would render a saving of 67.5% and 71.0% with respect to the lighting systems originally considered. The project also financed the investment with recovery periods between 1.6 and 2.6 years. It is presented the equivalence between the characteristics of the different types of feasible lamps. [Spanish] El Fideicomiso para el Ahorro de la Energia Electrica (FIDE) trabajo conjuntamente con dos hoteles en construccion modificando los proyectos originales del sistema de iluminacion para lograr una adecuada seleccion de lamparas y subsistemas de control de iluminacion que redituaron en un ahorro del 67.5 y 71.0 % respecto a los sistemas de iluminacion originalmente considerados, al tiempo que financio la inversion con periodos de recuperacion entre 1.6 y 2.6 anos. Se expone una equivalencia entre las caracteristicas de los distintos tipos de lamparas factibles.

Desulfuration technologies: past, present and future; Tecnologias de desulfuracion: pasado, presente y futuro

Energy Technology Data Exchange (ETDEWEB)

Rodas G, Arturo; Blass A, Georgina; Panama T, Luz A [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2003-07-01

The interest for obtaining harmony between the electric power generation and the environment has derived into the design of numerous technologies for the control of the main emissions of atmospheric polluting agents, being some of them the sulfur oxides (SOx) that, at certain levels of concentration in the atmosphere, cause health damages and to the surrounding ecosystem. The present article shows an overview of the technologies for the disposal of sulfurated compounds in thermoelectric power stations and their application trends in the future systems of electric power generation. [Spanish] El interes por lograr una armonia entre la generacion de energia electrica y el medio ambiente, ha derivado en el diseno de numerosas tecnologias para el control de las principales emisiones de contaminantes atmosfericos, siendo algunos de ellos los oxidos de azufre (SOx) que, a ciertos niveles de concentracion en la atmosfera, ocasionan danos a la salud y al ecosistema circundante. El presente articulo muestra un panorama general de las tecnologias de eliminacion de compuestos sulfurados en centrales termoelectricas y sus tendencias de aplicacion en los futuros sistemas de generacion de energia electrica.

Submersible pumps: Energetic efficiency norm; Bombas sumergibles: norma de eficiencia energetica

Energy Technology Data Exchange (ETDEWEB)

Acosta Torres, R A; Buendia Dominguez, E H [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1998-12-31

The Instituto de Investigaciones Electricas (IIE), supporting the Comision Nacional para el Ahorro de Energia (CONAE), has prepared a preliminary project of the norm of energy efficiency for submersible pumps. This document has complied with the necessary formalities for the emission of the norm. This paper presents the results of the analysis of the submersible pumps, the energy savings, as well as the economic evaluation that sustains the norm project, additionally pointing out the environmental impact that will bring along the implantation of the same. [Espanol] El Instituto de Investigaciones Electricas (IIE), apoyando a la Comision Nacional para el Ahorro de Energia (CONAE), ha elaborado el anteproyecto de norma de eficiencia energetica para bombas sumergibles. Dicho documento ha cumplido con los tramites necesarios para la emision de una norma. En el presente articulo se mencionan los resultados del analisis de las bombas sumergibles, los ahorros energeticos, asi como la evaluacion economica que sustenta el proyecto de norma, indicandose ademas el impacto ambiental que tendra la implantacion de la misma.

Industrial manufacturing of electric insulators; Fabricacion industrial de aisladores electricos

Energy Technology Data Exchange (ETDEWEB)

Gonzalez, Lucia [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1987-12-31

Porcelain is the insulating material more extensively used for electric insulators manufacturing, due to its dielectric properties; nevertheless, it presents fragility problems of manufacture and of resistance to the thermal shock, among others. For this reason studies are being conducted for the substitution of porcelain in the electric insulators manufacturing. In this area, the Instituto de Investigaciones Electricas developed an improved insulating formulation - the polymeric concrete- and an industrial prototype machine for the manufacture of high voltage electric insulators for outdoors use. [Espanol] La porcelana es el material aislante electrico mas utilizado en la elaboracion de aisladores electricos, debido a sus propiedades dielectricas; sin embargo, presenta problemas de fragilidad, de fabricacion y de baja resistencia al choque termico, entre otros. Es por ello que se realizan estudios para sustituir la porcelana en la fabricacion de aisladores electricos. En este campo, el Instituto de Investigaciones Electricas desarrollo una formulacion aislante mejorada -el concreto polimerico- y una maquina prototipo industrial para fabricar aisladores electricos de alto voltaje para uso en exteriores.

Risk analysis in the chemical industry; Analisis de riesgos en la industria quimica

Energy Technology Data Exchange (ETDEWEB)

Rea Soto, Rogelio; Sandoval Valenzuela, Salvador [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

2000-07-01

The Instituto de Investigaciones Electricas has a group of risk analysis (GAR), specialized in the most advanced methodologies to apply them in diverse industries of the productive sector, such as the nuclear, the oil and the chemical industries. In this work the integrated methodology that the GAR uses to make risk analysis in the chemical and oil industries is described. These analyses have as an objective to make a meticulous evaluation of the system design, the operation practices, the maintenance and inspection policies and the emergency plans. [Spanish] El Instituto de Investigaciones Electricas cuenta con un grupo de analisis de riesgo (GAR), especializado en las metodologias mas avanzadas para aplicarlas en diversas industrias del sector productivo, como lo son la nuclear, la petrolera y la quimica. En este trabajo se describe la metodologia integrada que el GAR utiliza para realizar analisis de riesgos en las industrias quimica y petrolera. Estos analisis tienen como objetivo realizar una minuciosa evaluacion del diseno del sistema, las practicas de operacion, las politicas de mantenimiento e inspeccion y los planes de emergencia.

Environmental management project of the Patache power plant project and associated transmission line; Gestion ambiental proyecto central termoelectrica Patache y linea de transmision asociada

Energy Technology Data Exchange (ETDEWEB)

Carreno Paredes, Cristian [Compania Electrica Tapaca (CELTA, S. A.), (Chile)

1997-12-31

This report makes a brief description of the services developed by INGENDESA of the projects executed in the area of engineering as well as in the area of environmental matters. In a second instance a relatively detailed presentation is made of the most important background of the Chilean project: {sup E}nvironmental Management of the Patache Power Plant and the Associated Transmission Line-Compania Electrica Tarapaca (CELTA, S.A.) Region I{sup .} The justification for the construction of the power plant and the environmental problems associated with the same are described [Espanol] En el presente informe se hace una breve presentacion de los servicios desarrollados por INGENDESA, de los proyectos elaborados tanto en el area de la ingenieria como en la tematica ambiental. En segunda instancia, se hace una presentacion relativamente detallada de los antecedentes mas importantes del proyecto chileno {sup G}estion Ambiental Central Patache y Linea de Transmision Asociada - Compania Electrica Tarapaca (CELTA, S.A.) I Region{sup .} Se describe la justificacion de la construccion de esta central termoelectrica y los problemas ambientales asociados a la misma

Environmental management project of the Patache power plant project and associated transmission line; Gestion ambiental proyecto central termoelectrica Patache y linea de transmision asociada

Energy Technology Data Exchange (ETDEWEB)

Carreno Paredes, Cristian [Compania Electrica Tapaca (CELTA, S. A.), (Chile)

1996-12-31

This report makes a brief description of the services developed by INGENDESA of the projects executed in the area of engineering as well as in the area of environmental matters. In a second instance a relatively detailed presentation is made of the most important background of the Chilean project: {sup E}nvironmental Management of the Patache Power Plant and the Associated Transmission Line-Compania Electrica Tarapaca (CELTA, S.A.) Region I{sup .} The justification for the construction of the power plant and the environmental problems associated with the same are described [Espanol] En el presente informe se hace una breve presentacion de los servicios desarrollados por INGENDESA, de los proyectos elaborados tanto en el area de la ingenieria como en la tematica ambiental. En segunda instancia, se hace una presentacion relativamente detallada de los antecedentes mas importantes del proyecto chileno {sup G}estion Ambiental Central Patache y Linea de Transmision Asociada - Compania Electrica Tarapaca (CELTA, S.A.) I Region{sup .} Se describe la justificacion de la construccion de esta central termoelectrica y los problemas ambientales asociados a la misma

Private vs. Public Investment in the Mexican Utility Company: A Case Study

Science.gov (United States)

Dieck-Assad, Flory Anette

2016-01-01

How should the strategies and regulations of the Mexican laws be designed in order to trigger a country to go from a non-sustainable energy economy towards a sustainable energy economy? This paper proposes a classroom debate of the reformed Law of Public Electricity Service in Mexico (LSPEE, 1992: Ley del Servicio Publico de Energia Electrica),…

Birth and development of an electrical system: the Spanish case

International Nuclear Information System (INIS)

Mielgo, P.

1999-01-01

The year that elapsed from the time when the Law on the electrical Sector was passed provides the author with sufficient perspective to review the changes which took place in the sector's regulation, structure and functioning, and, in this framework, review the history and role of one of the fundamental pieces in its operation, Red Electrica de Spain

Combined effect of nano-SiO2 and nano-Fe2O3 on compressive strength, flexural strength, porosity and electrical resistivity in cement mortars; Influencia de la combinación de nano-SiO2 y nano-Fe2O3 en la resistencia a compresión, resistencia a tracción, porosidad y resistividad eléctrica de morteros de cemento.

Energy Technology Data Exchange (ETDEWEB)

Sanjuán, M.A.; Argiz, C.; Gálvez, J.C.; Reyes, E.

2018-04-01

The compressive strength, flexural strength, porosity and electrical resistivity properties of cement mortars with nano-Fe2O3 and nano-SiO2 are studied. Amorphous silica is the main component of pozzolanic materials due to its reaction with calcium hydroxide formed from calcium silicate (C3S and C2S) hydration. The pozzolanic reaction rate is not only proportional to the amount of amorphous silica but also to the surface area available for reaction. Subsequently, fine nano-Fe2O3 and nano-SiO2 particles in mortars are expected to improve mortar performance. The experimental results showed that the compressive strength of mortars with nano-Fe2O3 and nano-SiO2 particles were lower than those obtained with the reference mortar at seven and 28 days. It was shown that the nano-particles were not able to enhance mechanical strength on every occasion. The continuous microstructural progress monitored by mercury intrusion porosimetry (MIP) measurements, pore-size distribution (PSD), total porosity and critical pore diameter also confirmed such results. [Spanish] Se estudia la resistencia a compresión y flexión, porosidad y resistividad eléctrica de morteros de cemento con nano-Fe2O3 y nano-SiO2. La sílice amorfa reacciona con el hidróxido de calcio formado en la hidratación del C3S y C2S. La tasa de reacción puzolánica es proporcional a la cantidad de sílice amorfa y la superficie disponible para la reacción, esperando que las partículas finas de nano-Fe2O3 y nano-SiO2 mejoren las propiedades de los morteros. Los resultados experimentales han mostrado que la resistencia a compresión a siete y 28 días de morteros con partículas de nano-Fe2O3 y nano-SiO2 era, en ocasiones, inferior a la obtenida con el mortero de referencia. Se muestra que las nano-partículas no siempre son capaces de mejorar la resistencia de los morteros. Las medidas mediante porosimetría de intrusión de mercurio (PIM) de la distribución de tamaño de poro (DTP), porosidad total y di

State of the art of technologies thermosolar to concentration; Estado del arte de las tecnologias termosolares a concentracion

Energy Technology Data Exchange (ETDEWEB)

Ramos Berume, Carlos; Huacuz Villamar, Jorge M; Medrano Vaca, M. Consolacion [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

2000-07-01

Nowadays Research and Development activities on Solar Thermal Power Generating Systems are supported by some countries around the world. Because of their thermal nature each of these plants can be operated only with solar energy or can be hybridized (solar/fossil fuel) and also with thermal storage systems. These types of solar thermal power plants are: Central Receiver, a circular field of tracking mirrors called helisotats reflects the solar energy onto receiver mounted on top of a central tower. Parabolic Trough, use linear parabolic concentrators to reflect sunlight to a receiver along the focal line (metallic pipe). Inside the pipe solar energy is absorbed in a working fluid with temperatures up to 390 Celsius degrees, which is then piped to a central location to power a conventional steam turbine and Parabolic Dish uses a parabolic dish concentrator to focus solar energy to a receiver and a heat engine/generator, located at the focus of the dish, to generate electrical power. In this document, we present the current status of technologies. A description of market opportunities, cost and technological perspectives are also included. [Spanish] Actualmente la Investigacion and Desarrollo para la generacion de potencia electrica mediante el aprovechamiento de la energia solar por la ruta termodinamica esta siendo apoyada por varios paises. Debido a su naturaleza termica estas pueden operar bajo esquemas de operacion solo con energia solar o en forma de plantas hibridas (solar-combustible fosil) y en algunos casos adaptadas con sistemas de almacenamiento termico. Los tipos de plantas solares de generacion electrica son: Receptor Central (RC), utilizan un campo colector con dispositivos llamados heliostatos arreglados en un campo circular y reflejando la radiacion solar sobre un receptor montado en la parte mas alta de una torre. Canal Parabolica (CP), estas plantas utilizan espejos curvados en forma de una parabola que redirigen los rayos del sol sobre su linea

Development of a prototype of a Master Central Unit (MCU) for the automation of Distribution Control Centers; Desarrollo de un prototipo de Unidad Central Maestra (UCM) para la automatizacion de Centros de Control de Distribucion

Energy Technology Data Exchange (ETDEWEB)

Uribe Blanco, Carlos Eduardo; Mata Almanza, Rafael; Picasso Blanquel, Cuitlahuac [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2011-07-01

For the purpose of contributing to the strategic plan and to the improvement of productivity and competitiveness levels, the Federal Electric Commission (CFE, Spanish acronym) is making a significant investment in human resources and materials to modernize electric energy supply systems, including monitoring, protection and automatic control for operating all the elements of the electrical process, from generating plants to transmission lines, distribution systems and commercial applications. With this modernization, the CFE is also creating the infrastructure for the interoperability and interconnectivity of the above systems, in such a way to enable it to broaden, continue and complement the functional integration of the linked institutional systems of the latest generation. The total integration of the systems will allow the CFE to move toward Intelligent Electric Networks. Therefore, the CFE requested help from the Electric Research Institute (IIE, Spanish acronym) to develop part of the infrastructure to modernize the automation of distribution. This consists of the development of a prototype of the supervision and control system, using interoperable open technology owned by the CFE which enables using the functions of a SCADA system (Supervisory Control And Data Acquisition) to supervise and control electric distribution networks. [Spanish] Con el proposito de contribuir al plan estrategico y mejoramiento de los niveles de productividad y competitividad, la Comision Federal de Electricidad (CFE) esta invirtiendo fuertemente en recursos humanos y materiales para la modernizacion de los sistemas de suministro de energia electrica, incluyendo el monitoreo, proteccion y control automatico para la operacion de todos los elementos del proceso electrico, desde los centros de generacion hasta las lineas de transmision, los sistemas de distribucion y las aplicaciones de comercializacion. Con dicha modernizacion, la CFE tambien esta generando la infraestructura para la

Speed control and generation of electric power of a gas turbine by means of fuzzy-logic; Control de velocidad y de generacion de potencia electrica de una turbina de gas mediante logica difusa

Energy Technology Data Exchange (ETDEWEB)

Bahamaca Fernandez, Luis Jonathan

2000-08-01

The development of a fuzzy-logic control algorithm is presented. It was developed for the speed and load control of a gas turbine. The speed/load controller of the gas turbine which were conventional Pi's were completely replaced by the fuzzy-logic controllers. The fuzzy controllers correspond to MISO systems that has as input the error an its rate of change and as an output the control signal for the fuel valve. The fuzzy controller provides an algorithm that can turn a strategy of linguistic control (based on knowledge of experts) into a strategy of automatic control. The fuzzy controllers were validated by the development of functional test in a simulation of a nonlinear mathematical gas-turbine model. The controllers were programmed in C language in PC. Simulation test for the speed regulation and load tracking were used for the controller validation. The fuzzy controller had a good performance because the minimized the signal error produced by the set of programmed system perturbations (due to control actions). Besides, they had a better reference tracking then PI controllers. Consequently, the proposed fuzzy controllers have a better performance than the conventional control system. [Spanish] En este trabajo de tesis se presenta el diseno, programacion y evaluacion de un algoritmo de control basado en logica difusa para el control de velocidad y generacion de potencia electrica de una turbina de gas. En el esquema de control velocidad/carga de la turbina de gas, se sustituyeron completamente los dos controladores convencionales del tipo PI por controladores difusos, teniendo asi un control digital directo. Los controladores difusos corresponden a sistemas MISO que utilizan como variables de entrada el error y la derivada del error, y como variable de salida la senal de control a la valvula de combustible. De esta forma, un controlador difuso provee un algoritmo que puede convertir una estrategia de control linguistico (basado en conocimiento de expertos

Assessment of environmental issues using SUPER-OLADE/BID for comparing alternative electricity system expansion strategies. A case study for Colombia

Energy Technology Data Exchange (ETDEWEB)

Campo, R [Bogota (Colombia); Angel, E [Interconexion Electrica S.A., Medellin (Colombia); Gomez, D; Leon, O L [Empresa de Energia de Bogota, Bogota (Colombia)

1996-06-01

SUPER is a modular package for electricity generation expansion studies. It includes an environmental impacts module (EIM), originally developed by Interconexion Electrica S.A., the operator of the Colombian Power Pool, and adapted for use by utilities with a large hydro component. The paper describes the EIM and illustrates its application to a recent study. (author). 2 figs, 2 tabs.

Evaluation of electric properties of cement mortars containing pozzolans

Directory of Open Access Journals (Sweden)

Cruz, J. M.

2011-03-01

Full Text Available In this paper the evolution of the microstructure of Portland cement mortar is analyzed, by using electrical impedance measurements. Cement mortars are compared without and with two pozzolanic substitutions: spent fluid catalytic cracking catalyst (FCC and metakaolin (MK. The measurement method is described and the model for analyzing the electrical impedance spectra is developed. Three electrical parameters are defined: electrical resistivity, capacitance exponent, and capacitive factor. The results show a significant increase in resistivity of the mortars with pozzolans after 7 days of curing, especially in mortars with MK. This increase is correlated with lime-fixing by the pozzolans. The capacitive properties evolve differently at early age, but reach the same values after 148 days. The electrical and mineralogical data show that the evolution of the microstructure in the mortar with MK starts before it does in the mortars with FCC and that the final microstructure becomes different.

En este trabajo se analiza la microestructura de morteros de cemento Portland, mediante medidas de impedancia eléctrica. Se comparan morteros de cemento sin y con dos sustituciones puzolánicas: residuo de catalizador de craqueo catalítico (FCC y metacaolín (MK. Se describe el método de medida y se desarrolla el modelo de análisis de los espectros de impedancia eléctrica. Se definen tres parámetros eléctricos: resistividad eléctrica, exponente capacitivo, y factor capacitivo. Se observa un aumento importante de la resistividad de los morteros con puzolana a partir de los 7 días de curado, sobre todo en morteros con MK. Este aumento está correlacionado con la fijación de cal de las puzolanas. Las propiedades capacitivas son diferentes a edad temprana, pero se igualan a los 148 días. Los resultados eléctricos y mineralógicos muestran que la evolución microestructural comienza antes en los morteros con MK que con FCC y que la microestructura

Técnicas e dispositivos para um Banho Inteligente

Directory of Open Access Journals (Sweden)

Alex Sandro de Araújo

2016-06-01

Full Text Available O atual cenário observado nas fontes energéticas e hídricas do Brasil exige formas de uso mais controladas que garantam a sustentabilidade destes recursos. Nesse sentido, a proposta deste trabalho foi a de produzir resultados que possam ser rapidamente empregados pela sociedade de todas as classes sociais em um ambiente onde mais se concentra o consumo de água e energia: o box do banheiro. Foram desenvolvidas quatro estratégias que irão auxiliar o uso racional da água e energia. O primeiro consiste de uma intervenção sistêmica dos chuveiros domésticos visando reduzir o consumo de energia em até 75% além de reduzir a vazão de água, sem danificar a resistência elétrica. Uma segunda estratégia é o aperfeiçoamento de um trocador de calor para chuveiro que aproveita o calor da água rejeitada para o ralo para pré-aquecer a água que irá entrar no chuveiro, com aproveitamento de até 44%. Como terceira estratégia, uma camada de material hidrofóbica foi depositada sobre as paredes internas do box do chuveiro, visando diminuir a retenção de sujeiras e resíduos nestas superfícies, que resultou na redução da necessidade de lavar este ambiente e, por fim, uma quarta estratégia consiste de um sistema que monitora a atividade do banho por meio da resistividade da água descartada no ralo, esta resistividade irá indicar se a pessoa ainda está tomando banho ou se está havendo desperdício, caso seja caracterizado o desperdício uma solenoide irá cortar o fornecimento de água do chuveiro. Os resultados obtidos foram aderentes com o projetado e o trabalho sugere que novos estudos podem ser feitos visando melhorar a eficiência energética e hídrica no local de banho.

DETERMINACIÓN DE LA SIMETRÍA DEL PARÁMETRO DE ORDEN EN SUPERCONDUCTORES DE ALTA Tc DE BISMUTO (BiSCCO-2223

Directory of Open Access Journals (Sweden)

Alvaro Mariño

2012-01-01

Full Text Available A partir de mediciones de la conductividad electrotérmica (P en función del campo magnético externo aplicado, se determinó la simetría del parámetro de orden (OPS de muestras superconductoras de bismuto (BiSCCO-2223, asumiendo una correlación entre el exceso de conductividad electrotérmica y la contribución producida por la dispersión entre cuasipartículas y vórtices. El comportamiento de los resultados experimentales del exceso de la conductividad electrotérmica determinados a partir de mediciones de resistividad eléctrica (ρ y termopotencia (S a diferentes temperaturas cercanas a Tc, se describen bien asumiendo un parámetro de orden con simetría del tipo ondas d (dx2 - y2.

Digital viscosity controller for fossil power plants; Controlador digital de viscosidad para plantas termoelectricas

Energy Technology Data Exchange (ETDEWEB)

Bautista B, Amberto; Ocampo P, Carlos; Gutierrez A, Ruben; Madinaveitia V, Miguel [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1990-12-31

Upon the need of increasing the efficiency of the existing fossil power plants in Mexico, the Instrumentation and Control Department of the Instituto de Investigaciones Electricas (IIE) designed and built a viscosity controller to enhance the fuel oil heating process. The system strategy, that allows the control either by temperature or viscosity considers, as an important element, the changing characteristics of the supplied fuels. The equipment that is utilized forms apart of the line Acquisition and Control System (ACS) developed at the same Institute, that has been successfully applied in other systems. [Espanol] Ante la necesidad de aumentar la eficiencia de las plantas termoelectricas existentes en Mexico, el Departamento de Instrumentacion y Control, del Instituto de Investigaciones Electricas (IIE), diseno y construyo un controlador de viscosidad para mejorar el proceso de calentamiento del aceite combustible. La estrategia del sistema, que permite controlar ya sea por viscosidad o por temperatura, considera como elemento importante las caracteristicas cambiantes de los combustibles suministrados. El equipo que se utiliza forma parte de la linea SAC (sistema de adquisicion y control), desarrollada en el mismo Instituto, que se ha aplicado satisfactoriamente en otros sistemas.

Digital viscosity controller for fossil power plants; Controlador digital de viscosidad para plantas termoelectricas

Energy Technology Data Exchange (ETDEWEB)

Bautista B, Amberto; Ocampo P, Carlos; Gutierrez A, Ruben; Madinaveitia V, Miguel [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1989-12-31

Upon the need of increasing the efficiency of the existing fossil power plants in Mexico, the Instrumentation and Control Department of the Instituto de Investigaciones Electricas (IIE) designed and built a viscosity controller to enhance the fuel oil heating process. The system strategy, that allows the control either by temperature or viscosity considers, as an important element, the changing characteristics of the supplied fuels. The equipment that is utilized forms apart of the line Acquisition and Control System (ACS) developed at the same Institute, that has been successfully applied in other systems. [Espanol] Ante la necesidad de aumentar la eficiencia de las plantas termoelectricas existentes en Mexico, el Departamento de Instrumentacion y Control, del Instituto de Investigaciones Electricas (IIE), diseno y construyo un controlador de viscosidad para mejorar el proceso de calentamiento del aceite combustible. La estrategia del sistema, que permite controlar ya sea por viscosidad o por temperatura, considera como elemento importante las caracteristicas cambiantes de los combustibles suministrados. El equipo que se utiliza forma parte de la linea SAC (sistema de adquisicion y control), desarrollada en el mismo Instituto, que se ha aplicado satisfactoriamente en otros sistemas.

Measurement and control techniques for electric equipment development; Tecnicas de medicion y control para el desarrollo de equipos electricos

Energy Technology Data Exchange (ETDEWEB)

Ruiz Neblina, Joaquin [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1988-12-31

In broad outlines the measuring and control techniques that are used in the electric equipment development in the short circuit laboratories, are described. In this article the utilization criteria of the traditional and modern (analogical and digital) instruments are described as well as the tendency towards the system`s integration for the automation of the measurement and control processes. Also, mention is made of the systems currently being developed at the Instituto de Investigaciones Electricas (IIE) to be applied at the Short Circuit Laboratories of Comision Federal de Electricidad (CFE) and of the IIE. [Espanol] Se describen a grandes rasgos las tecnicas de medicion y control que se emplean para el desarrollo de equipos electricos en los laboratorios de corto circuito. En este articulo se describen los criterios de utilizacion de los instrumentos tradicionales y modernos (analogicos y digitales), asi como la tendencia hacia la integracion de sistemas para la automatizacion de los procesos de medicion y control. Tambien se mencionan los sistemas que actualmente se desarrollan en el Instituto de Investigaciones Electricas (IIE) para aplicarlos en los Laboratorios de Corto Circuito de la Comision Federal de Electricidad (CFE) y del Instituto.

Estimated losses of energy in a power system using a semi-statistical methodology; Estimacion de perdidas de energia en un sistema electrico de potencia mediante una metodologia semi-estadistica

Energy Technology Data Exchange (ETDEWEB)

Martinez Martinez, D [Centro Universitario UAEM, Valle de Teotihuacan (Mexico)]. E-mail: david_2mtz@hotmail.com; Martinez Lendech, J.F [Instituto Tecnologico de Estudios Superiores del Oriente del Estado de Hidalgo (Mexico)]. E-mail: mrtzlendech@hotmail.com; Garcia Herrera, C; Olvera Ricano, J.G. [Centro Universitario UAEM, Valle de Teotihuacan (Mexico)]. E-mails: cozobi_garcia@yahoo.com.mx; jgolverar@uaemex.mx

2013-03-15

Determination of electrical losses is one of the most important tasks for any enterprise dedicated to generation, transmission, transformation and/or distribution of electric energy. Any enterprise dedicated to these activities does continuously energy balances in order to estimate whole electrical losses of specific processes. However, it is necessary to classify the whole electrical losses into technical and non-technical losses. This paper presents a proposal for estimating technical and non-technical losses in an electrical power system. [Spanish] La determinacion de las perdidas de energia electrica es una de las labores mas importantes en cualquier empresa dedicada a la generacion, transmision, transformacion y/o distribucion de energia electrica. Es indudable que toda empresa dedicada a cualquiera de las actividades mencionadas anteriormente realiza periodicamente balances de energia que permiten estimar el valor de las perdidas totales de energia del proceso considerado. No obstante, para poder realizar un mejor analisis de la problematica de las perdidas de energia, es necesario separar el valor total de perdidas obtenido mediante un balance de energia, en perdidas tecnicas y perdidas no tecnicas. El presente trabajo presenta una propuesta para la estimacion de perdidas tecnicas y no tecnicas en un sistema electrico de potencia.

Turbomachinery; Turbomaquinaria

Energy Technology Data Exchange (ETDEWEB)

Rivas, Elena [ed.] [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

1999-07-01

The fossil fuel power stations have a large number of rotary equipment that faces diverse problems that do necessary to improve the present practices of operation and maintenance. In this article are presented the main systems that the Instituto de Investigaciones Electricas (IIE) offers nowadays for the predictive maintenance of rotary equipment in fossil fuel power plants developed by the Management of Turbomachinery. The systems that are described are: the Portable one, the SICAD (Computerized System for Dynamic Analysis), the SMC (Continuous Monitoring System) and finally the SIMPER (Computer Information System for the Predictive Maintenance of Rotary Equipment) [Spanish] Las centrales termoelectricas cuentan con una gran cantidad de equipo rotatorio que enfrenta diversos problemas que hacen necesario mejorar las practicas actuales de operacion y mantenimiento. En este articulo se presentan los principales sistemas que ofrece actualmente el Instituto de Investigaciones Electricas (IIE) para el mantenimiento predictivo de equipos rotatorios en centrales termoelectricas desarrollados en la Gerencia de Turbomaquinaria. Los sistemas que se describen son; el Portil, el Sicad ( Sistema Computarizado para Analisis Dinamico), el SMC ( Sistema de Monitoreo Continuo) y por ultimo el SIMPER (Sistema Informatico para el mantenimiento Predictivo de Equipo Rotatorio)

Measurement and control techniques for electric equipment development; Tecnicas de medicion y control para el desarrollo de equipos electricos

Energy Technology Data Exchange (ETDEWEB)

Ruiz Neblina, Joaquin [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1987-12-31

In broad outlines the measuring and control techniques that are used in the electric equipment development in the short circuit laboratories, are described. In this article the utilization criteria of the traditional and modern (analogical and digital) instruments are described as well as the tendency towards the system`s integration for the automation of the measurement and control processes. Also, mention is made of the systems currently being developed at the Instituto de Investigaciones Electricas (IIE) to be applied at the Short Circuit Laboratories of Comision Federal de Electricidad (CFE) and of the IIE. [Espanol] Se describen a grandes rasgos las tecnicas de medicion y control que se emplean para el desarrollo de equipos electricos en los laboratorios de corto circuito. En este articulo se describen los criterios de utilizacion de los instrumentos tradicionales y modernos (analogicos y digitales), asi como la tendencia hacia la integracion de sistemas para la automatizacion de los procesos de medicion y control. Tambien se mencionan los sistemas que actualmente se desarrollan en el Instituto de Investigaciones Electricas (IIE) para aplicarlos en los Laboratorios de Corto Circuito de la Comision Federal de Electricidad (CFE) y del Instituto.

Estimation of the resource and technological prospective of geothermal energy in Mexico (Annexe 3 in 'A vision of year 2030 on the use of the renewable energies in Mexico'); Estimacion del recurso y prospectiva tecnologica de la geotermia en Mexico (Anexo 3 en 'Una vision al 2030 de la utilizacion de las energias renovables en Mexico')

Energy Technology Data Exchange (ETDEWEB)

Iglesias R, Eduardo; Arellano G, Victor; Torres R, Rodolfo Joaquin [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2005-08-15

Due to its individual geologic-structural characteristics, Mexico counts on abundant geothermal resources. At the moment we count on a database that includes 2,332 geothermal manifestations distributed in 27 of the 32 Mexican states, the geothermal resources are classified as high temperature and intermediate or low temperature resources. Those of high temperature can be used for the generation of electrical energy. Those of intermediate to low temperature are more appropriate for direct applications of the geothermal heat. As of today, in Mexico exist four geothermal fields of high temperature that are being exploded for the electrical generation. [Spanish] Debido a sus particulares caracteristicas geologico-estructurales, Mexico cuenta con abundantes recursos geotermicos. Actualmente contamos con una base de datos que incluye 2,332 manifestaciones geotermicas distribuidas en 27 de los 32 estados mexicanos, los recursos geotermicos se clasifican en de alta temperatura y recursos de temperatura intermedia a baja. Los de alta temperatura pueden utilizarse para la generacion de energia electrica. Los de temperatura intermedia a baja son mas apropiados para aplicaciones directas del calor geotermico. Actualmente en Mexico existen cuatro campos geotermicos de alta temperatura que estan siendo explotados para la generacion electrica.

Strategies for energy saving in warm climate dwellings; Estrategias de ahorro de energia para viviendas en clima calido

Energy Technology Data Exchange (ETDEWEB)

Pilatowsky, I [Centro de Investigacion en Energia, Universidad Nacional Autonoma de Mexico (Mexico); Ramos Niembro, Gaudencio [Comision Nacional para el Ahorro de Energia -CONAE (Mexico); Morillon, David [Instituto de Ingenieria, Universidad Nacional Autonoma de Mexico (Mexico); Oskam, A. [Centro de Fisica Aplicada y Tecnologia Avanzada, Universidad Nacional Autonoma de Mexico (Mexico)

2008-04-15

The domestic sector consumes almost one quarter of the national electrical energy. In order to reduce in an important manner the power consumption in dwellings there is an integral alternative based on three elements: the bio-climatic design, the saving and efficient use of the energy in equipment and apparatuses, and the use of centralized air conditioning systems. Besides saving the electrical and thermal power consumption, with this scheme, comfort conditions are pretended to be reached in dwellings and, contributing at the same time, to the diminution of polluting emissions. [Spanish] El sector domestico consume casi una cuarta parte de la energia electrica nacional. Con objeto de reducir de manera importante el consumo de energia en las viviendas, se presenta una alternativa integral, basada en tres elementos: el diseno bioclimatico, el ahorro y uso eficiente de la energia en equipos y aparatos, y la utilizacion de sistemas de climatizacion centralizados. Ademas del ahorro en el consumo de energia electrica y termica, con este esquema se pretende alcanzar condiciones de confort en las viviendas y, al mismo tiempo, contribuir a la disminucion de emisiones contaminantes.

Development of a electrothermal model to scale to determine the energy behavior in buildings with air conditioning; Desarrollo de un modelo electrotermico a escala para determinar el comportamiento energetico en edificaciones con aire acondicionado

Energy Technology Data Exchange (ETDEWEB)

Acoltzi, Higinio [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

2001-07-01

determinar el comportamiento energetico de modulos de prueba a escala de edificios. El modelo determina la historia del consumo de energia electrica para mantener la condiciones de confort al interior de los modulos, respecto a la variacion de los materiales de los techos y ventanas; todo esto con el objeto de establecer criterios de aplicacion de dichos materiales en la industria de la edificacion. Se presenta los consumos de energia electrica para los modulos con techos de loza monolitica, vigueta y clabovedilla y ventanas con vidrios reflectasol, filtrasol y claro. Finalmente, se presentan los resultados preliminares de la aplicacion del modelo propuesto a un edificio de escala normal. Las mediciones en campo y el modelo electrotermico teorico desarrollado, presenta diferencias promedio de 16%. Los ahorros de energia electrica observados con la aplicacion del modelo electrotermico teorico son: 1) si se cambia el vidrio claro por vidrio filtrasol, se pueden lograr ahorros de energia hasta del 14.5% para la loza de vigueta y bovedilla y de 12.4% para la loza monolitica; o 2) si se cambia el vidrio claro por vidrio reflectasol se pueden obtener ahorros de energia hasta de 28.1% para el caso de loza de vigueta y bovedilla y de 16.8% para la loza monolitica. La mejor opcion es sustituir la loza monolitica y vidrio claro por la loza de vigueta y bovedilla y vidrio reflectasol para obtener hasta un 37% de ahorro. Se muestra el arreglo de dispositivo experimental con los 3 modulos acoplados al aire acondicionado, y una con paracion grafica entre el consumo de energia acumulada teorica y experimental del modulo con loza de vigueta y bovedilla para los vidrios reflectasol, filtrasol y claro. Se da un resumen de los consumos de energia electrica totales.Verificacion experimental para determinar el comportamiento energetico de modulos de prueba a escala de edificios. El modelo determina la historia del consumo de energia electrica para mantener la condiciones de confort al interior

Preferred external power supplies; Fuentes electricas preferentes exteriores

Energy Technology Data Exchange (ETDEWEB)

Martinez Anton, L.

2010-07-01

In June 2008 ANAV and ENDESA DISTRIBUCION (EDE) undertook a joint study of Asco NPP Preferred External Power Supplies (PEPSs) to check the number of lines or power supplies to the 110 kV substation at Asco that met the criteria defined in the power supply regulations applicable to Asco NPP and primarily to confirm compliance with IEEE 765-2006 standard. (Author).

Alternative analysis to increase the power in combined-cycle power plants; Analisis de alternativas para el incremento de potencia en plantas termoelectricas de Ciclo Combinado

Energy Technology Data Exchange (ETDEWEB)

Pacheco Cruz, Hector; Arriola Medellin, Alejandro M. [Gerencia de Procesos Termicos, Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)]. E-mail: hpacheco@iie.org.mx; aarriola@iie.org.mx

2010-11-15

The electricity industry traditionally had two thermodynamic cycles for power generation: conventional steam turbine (Rankine cycle) used to supply a base load during the day, and gas turbines (Brayton cycle), for its speed response, normally used to cover peak loads. However, to provide variable peak loads, the gas turbine, as a volumetric machine is affected by the change in air density by changing the combustion temperature. This paper shows the scheme of integration of both systems, that it's known as combined cycle and the different options that would have these power plants, to maintain or increase their power in variable ambient conditions. It analyzes different options, such as: 1. Supplementary fire in the stove. 2. Air cooling intake in the gas turbine (evaporation system or mechanical system). 3. Steam injection in the combustion chamber. [Spanish] La industria electrica tradicionalmente a contado con dos ciclos termodinamicos para generacion electrica: las turbinas convencionales de vapor (ciclo de Rankine) se utilizan para suministrar una carga base durante el dia, y las turbinas de gas (ciclo de Brayton), por su rapidez de respuesta, se utilizan normalmente para cubrir las cargas pico. Sin embargo, para suministrar las cargas variables pico, la turbina a gas, por ser una maquina volumetrica, se ve afectada por el cambio de la densidad del aire de combustion al cambiar la temperatura ambiente. En este trabajo se muestra el esquema de integracion de ambos sistemas, en lo que se conoce como ciclo combinado y las diferentes opciones que tendrian estas plantas de generacion electrica para mantener o incrementar su potencia en condiciones ambiente variable. Para ello se analizan diferentes opciones, tales como: 1.- Combustion suplementaria en el recuperador de calor. 2.- Enfriamiento del aire de admision a la turbina de gas (mediante un sistema de evaporacion o mediante un sistema mecanico). 3.- Inyeccion de vapor a la camara de combustion. Palabras

Design and construction of a live insulator washing system for transformers; Diseno y construccion de un sistema de lavado en vivo para los aisladores de transformadores

Energy Technology Data Exchange (ETDEWEB)

Lizama-Camara, Y.A. [Universidad Veracruzana, Veracruz (Mexico)]. E-mail: yahir_lizama@ieee.org; Mendieta-Antunez, J.A.; Blanco-Brisset, E. [Industrias IEM, Tlalnepantla, Estado de Mexico (Mexico)]. E-mail: unamanu@hotmail.com; Olivares Galvan, J.C.; Escarela-Perez, R. [Universidad Autonoma Metropolitana, Unidad Azcapotzalco, Mexico, D.F. (Mexico)]. E-mails: jolivare_1999@yahoo.com; r.escarela@ieee.org

2012-04-15

Through the electrical industry history there have been developments of different cleaning methods to avoid the insulators flashover s due to pollution. This paper describes the principal cleaning methods applicable to transformers insulators, emphasizing the high pressure fixed-type live insulator washing method, which was applied for cleaning the insulators of 900 MVA transformer bank of the Laguna Verde power plant localized at the state of Veracruz in Mexico. We propose a transformer insulator cleaning methodology, which identifies the main variables to take into account (the voltage level of the transformers, the pollution level of the insulators, determination of the optimal wash time, the amount of water, the optimal pressure of water jet, the maximum conductivity of the water and the wind velocity), reference values are given for these variables. In addition, we present an economic cost analysis when applying a method of this kind in an electric substation. [Spanish] A lo largo de la historia de la industria electrica se han desarrollado diferentes metodos de limpieza para evitar las fallas de los aisladores de los transformadores debido a la contaminacion. Este articulo describe los principales metodos de limpieza aplicables a los aisladores de transformadores, enfatizando el sistema de lavado en vivo tipo fijo con agua a alta presion, metodo que fue aplicado para realizar la limpieza de los aisladores en el banco de transformadores de 900 MVA de la central electrica Laguna Verde, ubicada en el estado de Veracruz, en Mexico. Se propone una metodologia para la limpieza de los aisladores de transformadores, donde se identifican las principales variables a tomar en cuenta (el nivel de tension de los transformadores, nivel de contaminacion de los aisladores, determinacion del tiempo optimo de lavado, cantidad de precipitacion de agua, presion optima del chorro de agua, maxima conductividad del agua y las velocidades de los vientos) y se dan valores de

Methodology for the location of PMU for the monitoring of critical oscillations in power systems; Metodologia para la ubicacion de PMU para el monitoreo de oscilaciones criticas en sistemas electricos de potencia

Energy Technology Data Exchange (ETDEWEB)

Calderon Guizar, Jorge Guillermo [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2009-07-01

The deregulation and restructuring undergone by the electrical industry, as well as the tendency at world-wide level of reorganization in generation, transmission and distribution units has brought about, as a consequence, drastic changes in the operation of the electric power systems. The difficulties to construct new transmission power lines and the continuous increase in the electricity consumption are forcing more and more to operate the electric power systems every time nearer their safety limits. Nevertheless, to assure the system reliability without mattering what so plaintiff is the operating condition is a requirement that the electrical companies must satisfy. This panorama has motivated and impelled the use of new technologies for the critical indicators the monitoring that allow the electrical companies to guarantee the system safe operation. In this paper a methodology for the location of Fasorial Measurement Units, better known as FMU for the monitoring of the critical oscillation modes in the electric power systems is presented. [Spanish] La desregulacion y reestructuracion experimentada por la industria electrica, asi como la tendencia a nivel mundial de reorganizacion en unidades de generacion, transmision y distribucion ha traido como consecuencia cambios drasticos en la operacion de los sistemas electricos de potencia. Las dificultades para construir nuevas lineas de transmision y el incremento continuo en el consumo de electricidad estan forzando a operar el sistema electrico de potencia cada vez mas cerca de sus limites de seguridad. Sin embargo, asegurar la confiabilidad del sistema sin importar que tan demandante sea la condicion de operacion es un requisito que las companias electricas deben satisfacer. Este panorama ha motivado e impulsado el uso de nuevas tecnologias para el monitoreo de indicadores criticos que permitan a las companias electricas garantizar una operacion segura del sistema. En este trabajo se presenta una metodologia para

Atmospheric electric field effects of cosmic rays detected in Mexico City

Energy Technology Data Exchange (ETDEWEB)

Gonzalez, L. X; Valdes-Galicia, J. F [Instituto de Geofisica, Universidad National Autonoma de Mexico, Mexico D.F(Mexico)

2006-10-15

We studied the possible effects of atmospheric electric fields, generated in thunderstorms, on the cosmic ray intensity detected at the Earth's surface by investigating the variations of the counting rates of the cosmic-ray nucleonic component, obtained from the neutron monitor installed in Mexico City, for thunderstorms during 1996 and 1997. These were years of minimum solar activity. We compare our experimental results with the general theory of cosmic ray meteorological effects by Dorman (1995). The observed intensity variation is about 0.2%. According to Dorman (1995), the effect should be between 0.27% and 0.81% on the counting rate of the neutron monitor when the atmospheric electric field intensities are around 100 to 300 Vcm-1.Our results show that either the electric field in Mexico City had less intensity than assumed by Dorman (1995), or the electric field is not uniform in time and height during the development of the thunderstorm. [Spanish] Estudiamos los posibles efectos de los campos electricos atmosfericos, generados en las tormentas electricas, sobre la intensidad de los rayos cosmicos detectados en la superficie terrestre, analizando las variaciones de las razones de conteo de la componente nucleonica de los rayos cosmicos, obtenidas por el monitor de neutrones instalado en la ciudad de Mexico, durante tormentas electricas ocurridas entre 1996 y 1997, anos del minimo solar. Comparamos nuestros resultados experimentales con la teoria general de los efectos meteorologicos en los rayos cosmicos, desarrollada por Dorman (1995). Se observo una variacion en la intensidad de alrededor de 0.2%. De acuerdo con Dorman (1995), el efecto puede estar entre 0.27 % y 0.81% en las razones de conteo del monitor de neutrones cuando las intensidades del campo electrico atmosferico se encuentran al rededor de 100 a 300 Vcm-1. Nuestros resultados muestran que los campos electricos en la ciudad de Mexico tuvieron menos intensidad que los campos electricos asumidos

Implementation of the design attendent by computers (CAD) for the location of structures of power transmission lines; Implementacion del diseno asistido por computadora para la localizacion de estructuras de lineas de transmision

Energy Technology Data Exchange (ETDEWEB)

Vega Ortiz, Miguel; Gutierrez Arriola, Gustavo [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

2000-07-01

In order that the tools of CAD (Design Attended by Computer) that are offered in the market are really useful, they must combine the criteria and experiences of the expert designers with the specifications and practices established in the electrical company. This includes, from the introduction to the information system of the available input data and its design criteria, to obtaining the required output information. In the present work the methodology developed by the Instituto de Investigaciones Electricas (IIE) in the design of power transmission lines that integrates the Comision Federal de Electricidad (CFE) requirements in the design of its transmission power lines is an advanced computer tool that results in obtaining better designs. Some of the most important aspects are the reduction of the used working time, the cost of the designed line, its reliability, the flexibility in the information handling and the quality of presentation. [Spanish] Para que las herramientas de diseno asistido por computadora que se ofrecen en el mercado sean realmente utiles deben conjuntar los criterios y experiencias de los disenadores expertos con las especificaciones y practicas establecidas en la empresa electrica. Esto incluye desde la introduccion al sistema de la informacion de datos de entrada de la que se dispone y de sus criterios de diseno hasta la obtencion de la informacion de salida que se requiere. En el presente trabajo se resume la metodologia desarrollada por el Instituto de Investigaciones Electricas (IIE) en el diseno de lineas de transmision, que integra los requerimientos de la Comision Federal de Electricidad (CFE) en el diseno de sus lineas de transmision en una herramienta de computo avanzada y que redunda en la obtencion de mejores disenos. Algunos de los aspectos mas importantes son la reduccion del tiempo de trabajo empleado, el costo de la linea disenada, su confiabilidad, la flexibilidad en el manejo de informacion y la calidad de presentacion.

Economic and environmental impact of the utilization of the industrial potential of viable cogeneration for period 1998 - 2007; Impacto economico y ambiental de aprovechamiento del potencial industrial de cogeneracion viable para el periodo 1998 - 2007

Energy Technology Data Exchange (ETDEWEB)

Leon de los Santos, Gabriel; Mendoza Gonzslez, Lourdes [Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico)

2001-07-01

The utilization of the industrial potential of cogeneration offers a significant contribution to the construction of the electrical infrastructure that the growth of the country will require for the period 1998 - 2007. The conditions of growth of the co-generation potential and their levels of utilization are related to a on isolated growth of the other inter actors of the processes of power supply; As levels of economic viability, economic savings to industry, requirements of additional electrical capacity, growth of the industrial activity, costs, use of fuels, environmental impact. Rates of average growth for period 1998 - 2007 are considered and what levels of economic and environmental benefit offers this development to the industry, to the electrical company and to the country. And to what proportion can contribute the utilization of the industrial potential of electrical cogeneration to the requirements of additional electrical capacity that will require the development of the country during this period. With the rates of viable growth of the co-generation the equivalent reduction of fuel consumption is estimated for the industrial sector, given by the improvement in the generation efficiency and with the change in the proportion of fuels used in Comision Federal de Electricidad (CFE) for this period. Evaluating the emissions of the main fuels avoided with this growth and its repercussion at national level via the CFE, and showing the possible international implications of this reduction. [Spanish] El aprovechamiento del potencial industrial de cogeneracion ofrece una significativa aportacion a la construccion de la infraestructura electrica que el crecimiento del pais requerira para el periodo 1998 -2007. Las condiciones de crecimiento del potencial de cogeneracion y sus niveles de aprovechamiento estan relacionados con un crecimiento o aislado de los demas inter actores de los procesos de abasto energetico; Como niveles de viabilidad economica, ahorros

Technical and economical assessment of the options for energy saving in the library of the Universidad Autonoma Metropolitana-Azcapotzalco; Evaluacion tecnico economica de opciones para el ahorro de energia en la biblioteca de la Universidad Autonoma Metropolitana-Azcapotzalco

Energy Technology Data Exchange (ETDEWEB)

Bratu, N; Campero, E; Dorantes, R; Fuentes, V; Figueroa, A; Garcia, R; Zekkour, A [Universidad Autonoma Metropolitana-Azcapotzalco, Mexico, D. F. (Mexico)

1994-12-31

This paper presents a diagnosis of the electrical energy consumption in the library of the Azcapotzalco Unit of the Universidad Autonoma Metropolitana, to determine the actions that can be implemented for energy conservation. This without disturbing the lighting and thermal comfort. The analysis showed that, by changing the reflecting surfaces of the lighting lamps, the number of units can be reduced, without lowering the illumination level below the recommended values. The saving was estimated for replacement of the fluorescent lamps for others of metallic halogenides in the areas where the ceiling is high; for the installation of switches to improve the selectivity in turning on and turning off the lamps, achieving this way a better usage of the natural light; for the reduction of the electric load of the air conditioning units which will be obtained in incorporating induced draft shafts; and for an improvement in the electric and ballast installation. For the actions that turned out to be redeemable in three years the assistance of the Fideicomiso de Apoyo al Programa de Ahorro de Energia del Sector Electrico (FIDE) of the Comision Federal de Electricidad (CFE) has been available. It is expected that the execution of the modifications will be carried out in the November and December months of 1993, and the results will be evaluated in 1994. [Espanol] En este trabajo se presenta un diagnostico del consumo de energia electrica en la biblioteca de la Unidad Azcapotzalco de la Universidad Autonoma Metropolitana para determinar las acciones que se pueden llevar a cabo para ahorrar energia electrica. Esto sin deteriorar el confort luminico y termico. El analisis mostro que, cambiando las superficies reflectoras de las luminarias, se puede reducir el numero de lamparas, sin que el nivel de iluminacion quede debajo de los valores recomendados. Se estimaron ahorros: por la sustitucion de las lamparas fluorescentes por otras de halogenuros metalicos en las partes donde el

Technical and economical assessment of the options for energy saving in the library of the Universidad Autonoma Metropolitana-Azcapotzalco; Evaluacion tecnico economica de opciones para el ahorro de energia en la biblioteca de la Universidad Autonoma Metropolitana-Azcapotzalco

Energy Technology Data Exchange (ETDEWEB)

Bratu, N.; Campero, E.; Dorantes, R.; Fuentes, V.; Figueroa, A.; Garcia, R.; Zekkour, A. [Universidad Autonoma Metropolitana-Azcapotzalco, Mexico, D. F. (Mexico)

1993-12-31

This paper presents a diagnosis of the electrical energy consumption in the library of the Azcapotzalco Unit of the Universidad Autonoma Metropolitana, to determine the actions that can be implemented for energy conservation. This without disturbing the lighting and thermal comfort. The analysis showed that, by changing the reflecting surfaces of the lighting lamps, the number of units can be reduced, without lowering the illumination level below the recommended values. The saving was estimated for replacement of the fluorescent lamps for others of metallic halogenides in the areas where the ceiling is high; for the installation of switches to improve the selectivity in turning on and turning off the lamps, achieving this way a better usage of the natural light; for the reduction of the electric load of the air conditioning units which will be obtained in incorporating induced draft shafts; and for an improvement in the electric and ballast installation. For the actions that turned out to be redeemable in three years the assistance of the Fideicomiso de Apoyo al Programa de Ahorro de Energia del Sector Electrico (FIDE) of the Comision Federal de Electricidad (CFE) has been available. It is expected that the execution of the modifications will be carried out in the November and December months of 1993, and the results will be evaluated in 1994. [Espanol] En este trabajo se presenta un diagnostico del consumo de energia electrica en la biblioteca de la Unidad Azcapotzalco de la Universidad Autonoma Metropolitana para determinar las acciones que se pueden llevar a cabo para ahorrar energia electrica. Esto sin deteriorar el confort luminico y termico. El analisis mostro que, cambiando las superficies reflectoras de las luminarias, se puede reducir el numero de lamparas, sin que el nivel de iluminacion quede debajo de los valores recomendados. Se estimaron ahorros: por la sustitucion de las lamparas fluorescentes por otras de halogenuros metalicos en las partes donde el

Bibliography on Cold Regions Science and Technology. Volume 51, Part 1.

Science.gov (United States)

1997-12-01

interaction, Ice heat flux, Drift, Ice forecasting, Ice models, Computer- ized simulation 51-1008 Renovation techniques of ski areas. |Les tech...project was to determine the perfor- mance of the ground-coupled heat pump HVAC systems installed as part of the building renovation to Building 2189 at...power sup- ply for automatic recording systems. [Compor- tamiento de acumuladores como fuente de energia electrica para la alimentation de sistemas

JPRS Report, Science & Technology, Europe & Latin America, Argentina: Specifications of ARGOS 380 MW Reactor.

Science.gov (United States)

1988-02-18

and economy in operation. ENACE is an acronym for Empresa Nuclear Argentina de Centrales Electricas, or Argentine Nuclear Power Plant Corporation...products. The fuel transport system can be used during full reactor power operation to remove specially de - signed fuel assemblies containing rods for...SPECIFICATIONS OF ARGOS 380 MW REACTOR [Buenos Aires COMISION NACIONAL DE ENERGIA ATOMICA: INFORME in English 1987 pp 1-93] CONTENTS Argentine Offer of

Geothermal Energy

Science.gov (United States)

1975-11-15

Mexican Institute de Investigaciones de la Industria Electrica is actively participating. The program is itself a part of a natural resources study in...brtlan de Los Hervores geothermax area. Michoacan. Mexico. IN: ibid., v. 2, pt. 1, 381-398. 215. Mercado , S. Hißh activ.dy...indiciated that in the volcanic environment of the Taupo graben the most useful technique is de -resistivity profiling using linear arrays. 58

Normalization of the energy efficiency in pumping systems; Normalizacion de eficiencia energetica en sistemas de bombeo

Energy Technology Data Exchange (ETDEWEB)

Acosta Torres, R.A.; Buendia Dominguez, E.H. [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1995-12-31

The Instituto de Investigaciones Electricas (IIE), supporting the Comision Nacional para el Ahorro de Energia (CONAE) has prepared the preliminary project of the norm of energetic efficiency for pumping systems, specifically for the agricultural sector. This document has complied with the necessary formalities for the issue of a norm and is about to be published as a Mexican Official Norm of energetic efficiency. In this paper mention is made of the results in the analysis of the pumping systems in operation, the energy saving, as well as the economic evaluation that sustain the norm project, indicating besides the environmental impact that its implantation will have. [Espanol] El Instituto de Investigaciones Electricas (IIE) apoyando a la Comision Nacional para el Ahorro de Energia (CONAE) ha elaborado el anteproyecto de norma de eficiencia energetica en sistemas de bombeo, especificamente para el sector agricola. Dicho documento ha cumplido con los tramites necesarios para la emision de una norma, y esta proximo a publicarse como norma oficial mexicana de eficiencia energetica. En el presente articulo se mencionan los resultados del analisis de los sistemas de bombeo en operacion, los ahorros energeticos, asi como la evaluacion economica que sustenta el proyecto de norma, indicandose ademas el impacto ambiental que tendra la implantacion de la misma.

Normalization of the energy efficiency in pumping systems; Normalizacion de eficiencia energetica en sistemas de bombeo

Energy Technology Data Exchange (ETDEWEB)

Acosta Torres, R A; Buendia Dominguez, E H [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1996-12-31

The Instituto de Investigaciones Electricas (IIE), supporting the Comision Nacional para el Ahorro de Energia (CONAE) has prepared the preliminary project of the norm of energetic efficiency for pumping systems, specifically for the agricultural sector. This document has complied with the necessary formalities for the issue of a norm and is about to be published as a Mexican Official Norm of energetic efficiency. In this paper mention is made of the results in the analysis of the pumping systems in operation, the energy saving, as well as the economic evaluation that sustain the norm project, indicating besides the environmental impact that its implantation will have. [Espanol] El Instituto de Investigaciones Electricas (IIE) apoyando a la Comision Nacional para el Ahorro de Energia (CONAE) ha elaborado el anteproyecto de norma de eficiencia energetica en sistemas de bombeo, especificamente para el sector agricola. Dicho documento ha cumplido con los tramites necesarios para la emision de una norma, y esta proximo a publicarse como norma oficial mexicana de eficiencia energetica. En el presente articulo se mencionan los resultados del analisis de los sistemas de bombeo en operacion, los ahorros energeticos, asi como la evaluacion economica que sustenta el proyecto de norma, indicandose ademas el impacto ambiental que tendra la implantacion de la misma.

Energy evaluation process of electric domestic refrigerators; Proceso de evaluacion energetica de refrigeradores electrodomesticos

Energy Technology Data Exchange (ETDEWEB)

Malacara Toral, Manuel; Ruiz Neblina, Joaquin [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1993-12-31

A description is made of an energy evaluation study on electric domestic refrigerators carried out by the Instituto de Investigaciones Electricas (IIE), in its strategy for diminishing the energy consumption through the design enhancement, the manufacture, the operation and the standardization of the electric appliances. In order to initiate the evaluation-standardization process, the Mexican (NOM), the American (ANSI/AHAM) and the Canadian (CAN/CSA) standards were taken as a base to harmonize the procedures and the parameters of the tests. The energy assessment demonstrated that there are significant differences among the standards encompassed by the study, therefore, recommendations were made for the harmonization of the standards. [Espanol] Se describe un estudio de evaluacion energetica sobre refrigeradores electrodomesticos realizado en el Instituto de Investigaciones Electricas (IIE) dentro de la estrategia para disminuir los consumos de energia a traves de mejoras en el diseno, la manufactura, la operacion y la normalizacion de equipos electricos. Se tomo como base las normas mexicanas (NOM), americana (ANSI/AHAM) y canadiense (CAN/CSA) para iniciar el proceso de evaluacion-normalizacion a fin de armonizar los procedimientos y parametros de las pruebas. La evaluacion energetica demostro que existen diferencias significativas entre las normas que abarco el estudio por lo que se presentan recomendaciones para la armonizacion de las normas.

The anemodata 1-IIE. Automatic system for wind data acquisition; El anemodata 1-IIE. Sistema automatico para la adquisicion de datos de viento

Energy Technology Data Exchange (ETDEWEB)

Borja, Marco Antonio; Parkman Cuellar, Pablo A [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1987-12-31

Wind is an inexhaustible energy source. To study its behavior in order to develop research projects and apply new technologies connected to its maximum development is one of the activities carried on at the Instituto de Investigaciones Electricas (IIE). As a part of such activities, the equipment Anemodata-1-IIE was designed and built for the wind velocity and direction data acquisition. The Anemodata-1-IIE is the result of the work that the Departamento de Fuentes no Convencionales (Non-Conventional Energy Sources of the Energy Sources Department) carries on regarding the development of electric equipment for the anemometry. [Espanol] Una fuente inagotable de energia es el viento. Estudiar su comportamiento para desarrollar proyectos de investigacion y aplicar nuevas tecnologias vinculadas con su maximo aprovechamiento es una de las actividades que se realizan en el Instituto de Investigaciones Electricas (IIE). Como parte de dichas actividades, se diseno y construyo el equipo Anemodata-1-IIE para la adquisicion de datos de velocidad y direccion del viento. El anemodata-1-IIE es un resultado de los trabajos que el Departamento de Fuentes no Convencionales, de la division de Fuentes de Energia, lleva a cabo en torno al desarrollo de equipo electrico para anemometria.

Non-destructive testing; Examenes no destructivos

Energy Technology Data Exchange (ETDEWEB)

Calva, Mauricio; Loske, Achim [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1988-12-31

The application of non-destructive testing (NDT) in several technical and industrial fields is pointed out, standing out its utilization in the detection of future failures without affecting the examined element. Likewise, the different types of NDTs and their processes, such as x-rays, ultrasoud, magnetic particles, induced currents, penetrating fluids, and optical means, are described. The Non-Destructive Tests Laboratory of the Instituto de Investigaciones Electricas (IIE), plans to create new and more reliable systems independent from the operator`s capacity, to contribute to fulfill the inspection and quality control needs of the generating Mexican power plants. [Espanol] Se senala la aplicacion de los examenes no destructivos (END) a diversos campos tecnicos e industriales, destacando su utilizacion en la deteccion de futuras fallas sin afectar el elemento examinado. Asimismo, se describen los diferentes tipos de END y sus procesos, tales como radiografia, ultrasonido, particulas magneticas, corrientes inducidas, liquidos penetrantes y metodos opticos. El Laboratorio de Pruebas no Destructivas, del Instituto de Investigaciones Electricas (IIE), planea crear sistemas novedosos mas confiables, que no dependan de la capacidad del operador, para contribuir a satisfacer las necesidades de inspeccion y control de calidad que se presentan en las plantas generadoras de energia mexicanas.

Diagnosis on line and off line of induction motors of low, medium and high voltage; Diagnostico en linea y fuera de linea de motores de induccion de baja, mediana y alta tension

Energy Technology Data Exchange (ETDEWEB)

Carvajal, Francisco Antonio; Ramirez, Jose Manuel; Arcos, Luis Fernando [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

1999-07-01

The induction motors of low, medium and high voltage are the electrical equipment of greatest application in industry. The importance which they have in the different productive processes does necessary to assure its operative continuity. The anticipated detection of a possible cause of fault allows to plan, with maintenance aims, the programmed removal of the motor. In this article are presented the results of the activities nowadays performed by Management of Electrical Equipment of the Instituto de Investigaciones Electricas (IIE) for the development and application of online diagnosis techniques for induction motors up to 13.8 kV. [Spanish] Los motores de induccion de baja, mediana y alta tension son los equipos eletricos de mayor aplicacion en la industria. La importancia que tienen en los diferentes procesos productivos hace necesario asegurar su continuidad operativa. La deteccion anticipada de una posible causa de falla permite planear, con fines de mantenimiento, la remocion programada del motor. En este articulo se presentan los resultados de las actividades que realiza actualmente la Gerencia de equipos Electricos del Instituto de investigaciones Electricas (IIE) para el desarrollo y la aplicacion de tecnicas de diagnostico en linea para motores de induccion de hasta 13.8 kV.

Substation automation. Integration of applications of the SICLE; Automatizacion de subestaciones. Integracion de aplicaciones sobre el SICLE

Energy Technology Data Exchange (ETDEWEB)

Gutierrez, Gustavo; Vega, Miguel [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1997-12-31

This paper presents the first applications developed by the Instituto de Investigaciones Electricas (IIE) on the infrastructure of the SICLE (Sistema de Informacion y Control Local de la Estacion) (Station Information and Local Control System), that Comision Federal de Electricidad (CFE) is now acquiring in order to automate its transmission substations. A computer infrastructure was obtained similar to the existing in the substation for the development of program testing at the IIE; the personnel of the same was trained; the applications in conjunction with the CFE specialists were defined; the agreed developments were made and installed at the Temascal II Substation. [Espanol] En el presente articulo se presentan las primeras aplicaciones desarrolladas por el Instituto de Investigaciones Electricas (IIE) sobre la infraestructura del SICLE (Sistema de Informacion y Control Local de Estacion) que esta adquiriendo la Comision Federal de Electricidad (CFE) a fin de automatizar sus subestaciones de transmision. Se obtuvo una infraestructura de computo similar a la existente en la subestacion para el desarrollo de prueba de programas en el IIE; se capacito al personal en la misma; se definieron las aplicaciones conjuntamente con los especialistas de la CFE; se hicieron los desarrollos acordados y se instalaron en la subestacion Temascal II.

Energy efficiency standardizing in vertical pumps; Normalizacion de eficiencia energetica en bombas verticales

Energy Technology Data Exchange (ETDEWEB)

Acosta Torres, Rosa Aracely; Buendia Dominguez, Eduardo H. [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1996-12-31

The Instituto de Investigaciones Electricas (IIE) supporting the Comision Nacional para el Ahorro de Energia (CONAE) (National Commission for Energy Saving) developed the project of a standard on energy efficiency of vertical pumps, turbine type with external motor. This documents has fulfilled the necessary formalities for the issuing of a norm, being published the Mexican Official Norm (NOM-001-ENER-1995) on December 22, 1995. This article relates the results of the study for the elaboration of this norm, considering the energy saving, as well as the economic evaluation that supports the project of the norm, indicating also the environmental impact that its implantation will have. [Espanol] El Instituto de Investigaciones Electricas (IIE) apoyando a la Comision Nacional para el Ahorro de Energia (CONAE) elaboro el anteproyecto de norma de eficiencia energetica en bombas verticales tipo turbina con motor externo. Dicho documento ha cumplido con los tramites necesarios para la emision de una norma, habiendose publicado como Norma Oficial Mexicana (NOM-001-ENER-1995) el 22 de diciembre de 1995. En el presente articulo se mencionan los resultados del estudio para la realizacion de esta norma, considerando los ahorros energeticos, asi como la evaluacion economica que sustenta el proyecto de norma, indicando tambien el impacto ambiental que tendra su implantacion.

Information system of industrial security and environmental protection (SISPA) of PEMEX; Sistema de informacion de seguridad industrial y proteccion ambiental (SISPA) de PEMEX

Energy Technology Data Exchange (ETDEWEB)

Carrisoza B, Vicente; Bernal M, Hector M [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico); Cortazar F, Segio [Petroleos Mexicanos (Mexico)

2002-07-01

The Management of Supervision of Processes (GSP) in collaboration with the Management of Control and Instrumentation (GCI) of the Instituto de Investigaciones Electricas (IIE), has developed a system able to respond in a opportune and coordinated way to the attention and handling of emergencies, optimization of the number of reports and its content, reduction of the time in which the reports of industrial security and environmental protection arrive at their destiny, diminution of the manual process in the elaboration of reports and information and, finally, able to automatically calculate the associated performance indicators related to the efficiency of actions in each one the involved areas. [Spanish] La Gerencia de Supervision de Procesos (GSP) en colaboracion con la Gerencia de Control e Instrumentacion (GCI) del Instituto de Investigaciones Electricas (IIE), ha desarrollado un sistema capaz de responder de manera oportuna y coordinada a la atencion y manejo de emergencias, optimizacion del numero de reportes y su contenido, reduccion del tiempo en que los reportes de seguridad industrial y proteccion ambiental llegan a su destino, disminucion del proceso manual en la elaboracion de reportes e informes y, finalmente, capaz de calcular automaticamente los indicadores de desempeno asociados a la eficiencia de las acciones en cada una las areas involucradas.

Energy efficiency standardizing in vertical pumps; Normalizacion de eficiencia energetica en bombas verticales

Energy Technology Data Exchange (ETDEWEB)

Acosta Torres, Rosa Aracely; Buendia Dominguez, Eduardo H [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1997-12-31

The Instituto de Investigaciones Electricas (IIE) supporting the Comision Nacional para el Ahorro de Energia (CONAE) (National Commission for Energy Saving) developed the project of a standard on energy efficiency of vertical pumps, turbine type with external motor. This documents has fulfilled the necessary formalities for the issuing of a norm, being published the Mexican Official Norm (NOM-001-ENER-1995) on December 22, 1995. This article relates the results of the study for the elaboration of this norm, considering the energy saving, as well as the economic evaluation that supports the project of the norm, indicating also the environmental impact that its implantation will have. [Espanol] El Instituto de Investigaciones Electricas (IIE) apoyando a la Comision Nacional para el Ahorro de Energia (CONAE) elaboro el anteproyecto de norma de eficiencia energetica en bombas verticales tipo turbina con motor externo. Dicho documento ha cumplido con los tramites necesarios para la emision de una norma, habiendose publicado como Norma Oficial Mexicana (NOM-001-ENER-1995) el 22 de diciembre de 1995. En el presente articulo se mencionan los resultados del estudio para la realizacion de esta norma, considerando los ahorros energeticos, asi como la evaluacion economica que sustenta el proyecto de norma, indicando tambien el impacto ambiental que tendra su implantacion.

Substation automation. Integration of applications of the SICLE; Automatizacion de subestaciones. Integracion de aplicaciones sobre el SICLE

Energy Technology Data Exchange (ETDEWEB)

Gutierrez, Gustavo; Vega, Miguel [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1998-12-31

This paper presents the first applications developed by the Instituto de Investigaciones Electricas (IIE) on the infrastructure of the SICLE (Sistema de Informacion y Control Local de la Estacion) (Station Information and Local Control System), that Comision Federal de Electricidad (CFE) is now acquiring in order to automate its transmission substations. A computer infrastructure was obtained similar to the existing in the substation for the development of program testing at the IIE; the personnel of the same was trained; the applications in conjunction with the CFE specialists were defined; the agreed developments were made and installed at the Temascal II Substation. [Espanol] En el presente articulo se presentan las primeras aplicaciones desarrolladas por el Instituto de Investigaciones Electricas (IIE) sobre la infraestructura del SICLE (Sistema de Informacion y Control Local de Estacion) que esta adquiriendo la Comision Federal de Electricidad (CFE) a fin de automatizar sus subestaciones de transmision. Se obtuvo una infraestructura de computo similar a la existente en la subestacion para el desarrollo de prueba de programas en el IIE; se capacito al personal en la misma; se definieron las aplicaciones conjuntamente con los especialistas de la CFE; se hicieron los desarrollos acordados y se instalaron en la subestacion Temascal II.

Development and fabrication process for ZnO based varistors for medium voltage arresters 13000 V to 34000 V; Desarrollo y produccion de varistores de ZnO dopados para media tension 13000 V a 34000 V

Energy Technology Data Exchange (ETDEWEB)

Gonzalez Rolon, B.; Ireta Moreno, F. [Facultad de Ingenieria Mecanica, Electrica y Electronica, Universidad de Guanajuato, Salamanca, Guanajuato (Mexico)]. E-mail: barbara@salamanca.ugto.mx; fireta@salamanca.ugto.mx

2011-04-15

The fabrication process for ZnO doped varistor blocks with Sb2O3/ Bi2O3 to medium tension of 13000 V to 34000 V, and was optimised in terms of a starting composition and firing temperatures with amounts for Sb2O3/ Bi2O3 ratios of 1.7 by dry pressing, and fired in the temperature 1150 degrees Celsius {+-}2 degrees Celsius. The microstructure characteristics were analysed across the surface of the varistor blocks in order to evaluate their microstructure homogeneity. Their current-voltage I-V and energy handling capabilities were also determined. Characteristics and electrical properties of the varistor blocks are discussed. [Spanish] El proceso de fabricacion para varistores de media tension de 13000 V a 34000 V de ZnO consistio en dopar con Sb2O3, Bi2O3 y optimizarlos en terminos de la composicion de inicio, con una relacion de Sb2O3/Bi2O3 de 1.7, y el uso de aditivos para ceramicas, la temperatura de sinterizado fue de 1150 grados centigrados {+-}2 grados centigrados. Se investigo la homogeneidad de la microestructura. Se determinaron las propiedades electricas mediante la determinacion de la grafica I-V. Las caracteristicas electricas son discutidas.

Deregulation and restructuring of the electric utility industry

Energy Technology Data Exchange (ETDEWEB)

Nixon, Hal [Utility Workers Union of America (UWUA), AFL-CIO, (United States)

1997-12-31

Federal and state policy makers are currently faced with the rapidly evolving issue of the restructuring and potential deregulation of the electric utility industry, a sector of the economy of huge importance through its sheer size and its impact on the daily life and livelihood of everyone. This paper describes eleven principles that must be adhered to in any restructuring of the electric industry. Adherence to the principle and positions outlined can help assure that the transition in this industry benefits all, not just a few, and that the general health and welfare of the people is protected and enhanced [Espanol] Los legisladores estatales y federales se estan enfrentando con el rapido y envolvente aspecto de la reestructuracion y desregulacion potencial de la industria electrica, un sector de la economia de enorme importancia por su tamano y su impacto en la vida diaria y los medios de vida. En esta ponencia se describen once principios y posiciones que deben ser considerados en cualquier reestructuracion de la industria electrica. El apego a los principios y posiciones comentados puede ayudar a asegurar que la transicion en esta industria deneficie a todos, no solo a unos cuantos, y que la salud general y bienestar de la gente sea protegida y mejorada

Non-destructive testing; Examenes no destructivos

Energy Technology Data Exchange (ETDEWEB)

Calva, Mauricio; Loske, Achim [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1987-12-31

The application of non-destructive testing (NDT) in several technical and industrial fields is pointed out, standing out its utilization in the detection of future failures without affecting the examined element. Likewise, the different types of NDTs and their processes, such as x-rays, ultrasoud, magnetic particles, induced currents, penetrating fluids, and optical means, are described. The Non-Destructive Tests Laboratory of the Instituto de Investigaciones Electricas (IIE), plans to create new and more reliable systems independent from the operator`s capacity, to contribute to fulfill the inspection and quality control needs of the generating Mexican power plants. [Espanol] Se senala la aplicacion de los examenes no destructivos (END) a diversos campos tecnicos e industriales, destacando su utilizacion en la deteccion de futuras fallas sin afectar el elemento examinado. Asimismo, se describen los diferentes tipos de END y sus procesos, tales como radiografia, ultrasonido, particulas magneticas, corrientes inducidas, liquidos penetrantes y metodos opticos. El Laboratorio de Pruebas no Destructivas, del Instituto de Investigaciones Electricas (IIE), planea crear sistemas novedosos mas confiables, que no dependan de la capacidad del operador, para contribuir a satisfacer las necesidades de inspeccion y control de calidad que se presentan en las plantas generadoras de energia mexicanas.

The anemodata 1-IIE. Automatic system for wind data acquisition; El anemodata 1-IIE. Sistema automatico para la adquisicion de datos de viento

Energy Technology Data Exchange (ETDEWEB)

Borja, Marco Antonio; Parkman Cuellar, Pablo A. [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1986-12-31

Wind is an inexhaustible energy source. To study its behavior in order to develop research projects and apply new technologies connected to its maximum development is one of the activities carried on at the Instituto de Investigaciones Electricas (IIE). As a part of such activities, the equipment Anemodata-1-IIE was designed and built for the wind velocity and direction data acquisition. The Anemodata-1-IIE is the result of the work that the Departamento de Fuentes no Convencionales (Non-Conventional Energy Sources of the Energy Sources Department) carries on regarding the development of electric equipment for the anemometry. [Espanol] Una fuente inagotable de energia es el viento. Estudiar su comportamiento para desarrollar proyectos de investigacion y aplicar nuevas tecnologias vinculadas con su maximo aprovechamiento es una de las actividades que se realizan en el Instituto de Investigaciones Electricas (IIE). Como parte de dichas actividades, se diseno y construyo el equipo Anemodata-1-IIE para la adquisicion de datos de velocidad y direccion del viento. El anemodata-1-IIE es un resultado de los trabajos que el Departamento de Fuentes no Convencionales, de la division de Fuentes de Energia, lleva a cabo en torno al desarrollo de equipo electrico para anemometria.

Energy evaluation process of electric domestic refrigerators; Proceso de evaluacion energetica de refrigeradores electrodomesticos

Energy Technology Data Exchange (ETDEWEB)

Malacara Toral, Manuel; Ruiz Neblina, Joaquin [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1992-12-31

A description is made of an energy evaluation study on electric domestic refrigerators carried out by the Instituto de Investigaciones Electricas (IIE), in its strategy for diminishing the energy consumption through the design enhancement, the manufacture, the operation and the standardization of the electric appliances. In order to initiate the evaluation-standardization process, the Mexican (NOM), the American (ANSI/AHAM) and the Canadian (CAN/CSA) standards were taken as a base to harmonize the procedures and the parameters of the tests. The energy assessment demonstrated that there are significant differences among the standards encompassed by the study, therefore, recommendations were made for the harmonization of the standards. [Espanol] Se describe un estudio de evaluacion energetica sobre refrigeradores electrodomesticos realizado en el Instituto de Investigaciones Electricas (IIE) dentro de la estrategia para disminuir los consumos de energia a traves de mejoras en el diseno, la manufactura, la operacion y la normalizacion de equipos electricos. Se tomo como base las normas mexicanas (NOM), americana (ANSI/AHAM) y canadiense (CAN/CSA) para iniciar el proceso de evaluacion-normalizacion a fin de armonizar los procedimientos y parametros de las pruebas. La evaluacion energetica demostro que existen diferencias significativas entre las normas que abarco el estudio por lo que se presentan recomendaciones para la armonizacion de las normas.

Operation planning of electrical power systems; Planeacion de operacion de sistemas electricos de potencia

Energy Technology Data Exchange (ETDEWEB)

Rivas, Elena [ed.; Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

1999-07-01

The development of a software that has facilitated and improved considerably the planning tasks, besides diminishing the production costs is presented. The software denominated Hydrothermal Coordination (HTC)(Coordinacion Hidrotermica (CHT)), was developed in the Instituto de Investigaciones Electricas (IIE), with this software the plan of short term operation of the generating units is determined. The software analyzes mathematically a great number of options regarding to the allocation of generation units and selects very close solutions, in cost, to the optimal one. It constitutes in addition an information system that stores the relevant data of each unit, useful for decision making. [Spanish] Se presenta el desarrollo de un software que ha facilitado y mejorado considerablemente las tareas de planeacion, ademas de disminuir los costos de produccion. El paquete denominado Coordinacion Hidrotermica (CHT), fue desarrollado en el Instituto de Investigaciones Electricas (IIE); con el se determina el plan de operacion a corto plazo de las unidades generadoras. El paquete analiza matematicamente un gran numero de opciones en lo que se refiere a la asignacion de unidades de generacion y selecciona soluciones muy cercanas, en costo, a la optima. Constituye ademas un sistema de informacion que almacena los datos relevantes de cada unidad, utiles para la toma de decisiones.

Caracterização geologica e geofisica da estrutura de impacto Domo de Vargeão, SC

OpenAIRE

Cesar Kazzuo Vieira

2009-01-01

Resumo: O Domo de Vargeão (SC), com 12,4km de diâmetro, é uma estrutura de impacto do tipo complexa parcialmente erodida, formada sobre os derrames vulcânicos da Formação Serra Geral, na bacia do Paraná. Em seu interior afloram, de forma anômala, arenitos atribuídos ás formações Botucatu e Pirambóia, normalmente situados a cerca de 1km abaixo da superfície atual. O objetivo principal deste estudo foi a caracterização geológica e geofísica do Domo de Vargeão, em superfície e em subsuperfície, ...

Análisis de viabilidad técnica-económica del parque eólico Altos de Peralta

OpenAIRE

Buey Casaus, Eduardo

2010-01-01

RESUMEN La energia eolica se considera una forma indirecta de energia solar. Entre el 1 y 2% de la energia proveniente del sol se convierte en viento, debido al movimiento del aire ocasionado por el desigual calentamiento de la superficie terrestre. La energia cinetica del viento puede transformarse en energia util, tanto mecanica como electrica. La energia eolica, transformada en energia mecanica ha sido historicamente aprovechada, pero su uso para la generacion de energia ...

Interconnected power systems of the countries of America Central (SIEPAC)

International Nuclear Information System (INIS)

2002-01-01

This presentation shows the project SIEPAC (Sistema de interconexion electrica de los paises de Centro America) describes the current transmission system, and planned SIEPAC transmission system, also describes the objectives: implementation of an central american electrical market named Mercado Electrico Regional that contributes to sustaintable development of the region. Also describes the power transmission lines, the structure of line transmission and its market to be covered. Financing of the project from lending institutions is explained

Cogeneration in a plywood factory; Sistema de cogeneracion en una planta maderera

Energy Technology Data Exchange (ETDEWEB)

Castelazo Hernandez, Arturo; Mendoza Arcaraz, Alfonso [Ultra Energia, S. A. de C. V. Naucalpan (Mexico)

1996-12-31

back-pressure steam turbine. The back-pressure steam turbine exhaust will be used to heat up the thermal oil through a steam-thermal oil heat exchanger. [Espanol] La Cogeneracion, que es la produccion conjunta de dos manifestaciones de energia a partir de una misma fuente energetica, se presenta como una de las alternativas mas viables para lograr el aprovechamiento optimo de los recursos energeticos finitos. En las ultimas decadas en que el crecimiento economico de Mexico ha estado ligado a la generacion y suministro de energia electrica, el Estado ha fungido como organizador y director del sistema nacional de generacion electrica, sin embargo la intervencion de los particulares ha sido determinante. Debemos tomar en cuenta que para cubrir las necesidades futuras de electricidad del desarrollo nacional, se requeriran aproximadamente 17 mil MW adicionales, para lo cual la iniciativa privada, entre las que podemos destacar a la pequena y mediana industria, tendra despejado el camino para producirlos, aprovechando los cambios en la Ley y el Reglamento del Servicio Publico de Energia Electrica, publicados en el Diario Oficial de la Federacion los dias 23 de diciembre de 1992 y 31 de mayo de 1993 respectivamente. Al contar con un sistema de cogeneracion optimizado, el importe economico anual de la empresa maderera por concepto de energia (electricidad y combustible) se reducira sustancialmente. La empresa maderera requiere la instalacion de un sistema de cogeneracion que suministre 4.75 MWe y 1,861 KWt (1.6 Gcal/hr). La energia electrica se utilizara en la fabricacion de TABLONES DE NOVOPAN y la energia termica para calentar aceite que se utiliza en la presa de madera y en la preparacion de la emulsion utilizada en el proceso. Para satisfacer los requerimientos energeticos se han analizado 2 alternativas: 1. Generacion de energia electrica con un motor de combustion interna que utilice combustoleo como combustible, aprovechandose los gases de escape del motor para pre

Cogeneration in a plywood factory; Sistema de cogeneracion en una planta maderera

Energy Technology Data Exchange (ETDEWEB)

Castelazo Hernandez, Arturo; Mendoza Arcaraz, Alfonso [Ultra Energia, S. A. de C. V. Naucalpan (Mexico)

1997-12-31

back-pressure steam turbine. The back-pressure steam turbine exhaust will be used to heat up the thermal oil through a steam-thermal oil heat exchanger. [Espanol] La Cogeneracion, que es la produccion conjunta de dos manifestaciones de energia a partir de una misma fuente energetica, se presenta como una de las alternativas mas viables para lograr el aprovechamiento optimo de los recursos energeticos finitos. En las ultimas decadas en que el crecimiento economico de Mexico ha estado ligado a la generacion y suministro de energia electrica, el Estado ha fungido como organizador y director del sistema nacional de generacion electrica, sin embargo la intervencion de los particulares ha sido determinante. Debemos tomar en cuenta que para cubrir las necesidades futuras de electricidad del desarrollo nacional, se requeriran aproximadamente 17 mil MW adicionales, para lo cual la iniciativa privada, entre las que podemos destacar a la pequena y mediana industria, tendra despejado el camino para producirlos, aprovechando los cambios en la Ley y el Reglamento del Servicio Publico de Energia Electrica, publicados en el Diario Oficial de la Federacion los dias 23 de diciembre de 1992 y 31 de mayo de 1993 respectivamente. Al contar con un sistema de cogeneracion optimizado, el importe economico anual de la empresa maderera por concepto de energia (electricidad y combustible) se reducira sustancialmente. La empresa maderera requiere la instalacion de un sistema de cogeneracion que suministre 4.75 MWe y 1,861 KWt (1.6 Gcal/hr). La energia electrica se utilizara en la fabricacion de TABLONES DE NOVOPAN y la energia termica para calentar aceite que se utiliza en la presa de madera y en la preparacion de la emulsion utilizada en el proceso. Para satisfacer los requerimientos energeticos se han analizado 2 alternativas: 1. Generacion de energia electrica con un motor de combustion interna que utilice combustoleo como combustible, aprovechandose los gases de escape del motor para pre

Medidas de efecto hall y resistividad en aleaciones magnéticas amorfas basadas en cofe

OpenAIRE

Melo-Quintero, Jhon; Rosales-Rivera, Andrés; Giraldo-Daza, Helver

2012-01-01

En este trabajo, presentamos el diseño y la automatización de un sistema de medición de efecto Hall de corriente directa (DC) y corriente alterna (AC) usando un método de cuatro puntas. Este sistema consiste en una fuente de corriente directa y alterna (Modelo 6221 CD-CA, Keithley Instruments Inc.) acoplada a un nano-voltímetro (Modelo 2182 A, Keithley Instruments Inc.), y un electroimán (Phylatex) que proporciona campos magnéticos de hasta 0,8 T. Este sistema tiene varias capacidades de medi...

An analysis of communications and networking technologies for the smart grid

Energy Technology Data Exchange (ETDEWEB)

Garcia Hernandez, Joaquin [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2013-03-01

network architecture must be built using standard, open protocols. Internet Protocol (IP) and broadband networks could form the backbone of this infrastructure, as they are flexible and resilient enough to meet the demand of the grid. The benefits of using IP-based networks include the maturity of a large number of IP standards, the availability of tools and applications that can be applied to multiple smart grid areas, and the widespread use of IP technologies in both private and public networks. In addition, IP technologies are the link between applications and the underlying communication physical medium. They allow applications to be developed independent of both the communications infrastructure and the various communications technologies to be used, either wired or wireless. From a general point of view, the main role of communication and networking technologies is to make the current electrical grid, smart. The Smart Grid will use many types of communications technologies such as public and private, wired and wireless, licensed and unlicensed, and standard and proprietary technologies. There exist a great number of communications and networking technologies that can be used to support smart grid applications, including fiber optics systems, cellular, satellite, trunked radio, WiMAX, power line carrier, broadband over power lines (BPL), and IP, as well as in-home technologies such as Ethernet, Wi-Fi, HomePlug, ZigBee, RF Mesh, etc. In this work, an analysis of the most relevant communications and networking technologies applicable to the Smart Grid is presented. [Spanish] El concepto de red electrica inteligente (REI) ha sido conceptualizado como la integracion de la red electrica (generacion, transmision y distribucion) y la red de comunicaciones, esta ultima es considerada como la tecnologia habilitadora fundamental para el desarrollo e integracion de la futura REI. Las tecnologias modernas de comunicacion, arquitecturas de protocolos y estandares pueden ayudar a

Transient analysis for grounding systems considering the ground ionization; Analisis transitorio de sistemas de puesta a tierra considerando la ionizacion del suelo

Energy Technology Data Exchange (ETDEWEB)

Salgado Salgado, Luis Alberto

2008-06-15

All electrical installation must have an effective grounding system. The purpose of this grounding system is to provide a low impedance path for draining electric currents generated by faults, switching operations or atmospheric discharges to earth, avoiding damage to people, equipment or installations. High currents drained to ground leads to an electric field which can be capable of breaking down the dielectric strength of the ground. When this happens, the ionization phenomena takes place, which reduce the grounding system impedance and modify its performance. In this thesis, a computational model for evaluating the transient performance of grounding systems subjected to high magnitude and frequency currents is presented. The model is based in a transmission line approach and the grounding system transient analysis is carried out in the frequency domain. The time domain translation is performed by means of the Fast Fourier Inverse Transform (FFIT). The computer model is capable of simulating soil ionization. The computer model developed is used to study the performance of vertical rods and grounding grids of different sizes. In every case, different electric field magnitudes and soil's resistivity were used, currents of different frequency components and magnitude values where used as well. The obtained results presented were compared and validated with other computer model results and measurements published in the literature. [Spanish] Toda instalacion electrica debe contar con un sistema de puesta a tierra efectivo. La finalidad de este sistema es proporcionar un camino de baja impedancia para drenar a tierra las corrientes generadas por fallas, maniobras o fenomenos naturales como las descargas atmosfericas, evitando de esta manera danos a las personas, equipos o instalaciones. Cuando las corrientes drenadas a tierra son de gran magnitud se origina un campo electrico critico capaz de romper la rigidez dielectrica del suelo que rodea los conductores del

Diagnosis system for nozzles in high voltage equipment; Sistema de diagnostico para boquillas en equipos de alta tension

Energy Technology Data Exchange (ETDEWEB)

Ramirez Nino, Jose; Escorsa Morales, Oscar [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico); Lopez Azamar, Ernesto [Comision Federal de Electricidad (Mexico)

2000-07-01

The nozzles used in high voltage electrical equipment, such as power transformers and circuit breakers, constitute the elements that present greater fault risk. On the other hand, the faults in the nozzles cause, in most of the cases catastrophic damages, that expose to risk the maintenance personnel of the plant and the peripheral equipment. With the purpose of contributing with on-line monitoring techniques that indicate the nozzles condition and allow to anticipate their possible fault, the Instituto de Investigaciones Electricas (IIE) performed for the laboratory of tests of equipment and materials (LAPEM) of Comision Federal de Electricidad (CFE), a project for the development of a system for the measurement of capacitive currents in these equipments. This system allows to determine the variation in capacitance and dielectric losses, and to determine the presence of internal partial discharges in nozzles of 115, 230 and 400 kV. With this information it is possible to determine the condition of the internal isolation of the nozzles and retire them from service before deterioration takes place that puts in danger the integrity of the equipment. The management of electrical equipment of the Instituto de Investigaciones Electricas developed for LAPEM a system that measures capacitive currents of power transformer nozzles. This system was designed with the purpose of installing it in a transformer of a 400 kV machine, in the fossil power station of Tula, Hidalgo, of the Comision Federal de Electricidad. [Spanish] Las boquillas empleadas en los equipos electricos de alta tension, como transformadores de potencia e interruptores, constituyen los elementos que presentan mayor riesgo de falla. Por otro lado, las fallas en las boquillas provocan en la mayoria de los casos danos catastroficos que ponen en riesgo al personal de mantenimiento de la planta y al equipo periferico. Con la finalidad de aportar tecnicas de monitoreo en linea que indiquen el estado de las

Importance of the development of a data base on final uses of energy in the domestic sector; Importancia del desarrollo de una base de datos de usos finales de energia en el sector domestico

Energy Technology Data Exchange (ETDEWEB)

Sanchez Ramos, Itha [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2001-07-01

The saving and rational use of the energy is integral part of our life. This concept is seen already reflected in economic, technological, social and environmental factors in our country. The options of energy saving are seen like an alternative of investment as much for the user as for the electrical companies; nevertheless, to determine the saving potential in a sector it is necessary to understand how and for what purpose is the energy used. The domestic sector in our country consumes more than 20% of the demanded electrical energy and exist several factors that can cause that this percentage is increased. In spite of this, there is a great potential of energy saving in this sector, nevertheless specialized studies are required on the final uses of energy. But to be able to make these studies it is necessary to have a great amount of data on energy, climatologic, economic and financial, and social type. If these were found in a single data base, they could be used to plan, implement, evaluate and improve energy saving programs. This article focuses towards the importance of the knowledge of the real final uses of electrical energy in the domestic sector and presents as a result the conformation of a data base of household-electric final uses of electrical energy as well as the development of a tool that takes advantage of this data base to evaluate measures of change of equipment for a more efficient one. [Spanish] El ahorro y uso racional de la de energia es parte integral de nuestra vida. Este concepto se ve ya reflejado en factores economicos, tecnologicos, sociales y ambientales en nuestro pais. Las opciones de ahorro de energia son vistas como una alternativa de inversion tanto para el usuario como para las empresas electricas; sin embargo, para determinar el potencial de ahorro en un sector es necesario entender como y para que se emplea la energia. El sector domestico en nuestro pais consume mas del 20% de la energia electrica demandada y existen varios

α-MoO3 thin films prepared by spray pyrolysis Películas delgadas de α-MoO3 preparadas por atomización pirolítica

Directory of Open Access Journals (Sweden)

L D López-Carreño

2011-12-01

Full Text Available MoO3 thin films have been deposited on clean glass slides using the spray pyrolysis technique. The samples were grown with different thicknesses by spraying on common glass substrates a solution of(ammoniummolybdatetetrahydrate ((NH36Mo7O244H2O. The samples were characterized by X-ray diffraction (XRD, infrared spectroscopy, scanning electron microscopy (SEM and electrically through electrical resistivity measurements as a function of temperature. It was found that samples present crystalline structure associated with the alpha phase of MoO3 grown with preferential direction of growth along the planes (0k0. As result of increasing the volume of precursor solution sample surface becomes porous. The change in electrical resistance of MoO3 films by exposure to carbon monoxide (CO at room temperature, makes the films obtained by this technique could be promising in its use in gas sensing devices at room temperature.En este trabajo se prepararon películas delgadas de trióxido de molibdeno (MoO3 por la técnica de atomización pirolítica. Las películas fueron depositadas sobre sustratos de vidrio y obtenidas a partir de una solución precursora de Heptamolibdato de Amonio Tetrahidratado ((NH36Mo7O24.4H2O 0.1 M. La temperatura del sustrato se mantuvo constante en 400 oC y se varío el volumen de la solución precursora. Las muestras se caracterizaron por difracción de Rayos X (XRD, espectroscopía infrarroja, Microscopía Electrónica de Barrido (SEM y eléctricamente a través de medidas de resistividad eléctrica en función de la temperatura. Las muestras crecen con estructura cristalina correspondiente a la fase alfa del MoO3 con dirección preferencial de crecimiento a lo largo de los planos (0k0. Al aumentar el volumen de la solución precursora la superficie de las muestras se vuelve porosa. La resistividad en estas muestras cambia en un orden de magnitud cuando son expuestas a la atmosfera de CO.

Approach to the effect of concrete resistivity in the corrosion of rebars in concrete

Directory of Open Access Journals (Sweden)

Andrade, C.

1987-09-01

Full Text Available The concrete resistivity has been considered as a factor which affects the corrosion rate of the rebars. Untill now the only relation found has been stablished between potentials and resistivity for steel embedded in Chloride contaminated concrete. In this paper a comparison between corrosion rate of rebars, determined from Polarization Resistance method, and Electrical Resistance data measured through the electronic compensation of the ohmic drop are given. The results of i_corr and R_ohm has been measured for rebars embedded in mortar made with three different types of cement. The specimens were submited to an accelerated carbonation. The relation between i_corr and R_ohm is quite similar in all the cases and suggests that the concrete electrical resistivity may be a controling factor of the corrosion rate of the rebars.

La resistividad del hormigón se ha venido considerando como uno de los factores que afectan a la velocidad de corrosión de las armaduras, aunque, hasta ahora, la única relación encontrada ha sido la establecida entre los potenciales y la resistividad para acero embebido en hormigón contaminado por cloruros. En este trabajo se establecen comparaciones entre velocidad de corrosión de las armaduras, medida a través del método de determinación de la Resistencia de Polarización, y los datos de resistencia eléctrica medidos a través de la compensación de caída óhmica. Los resultados de i_corr y R_ohm se han medido en armaduras embebidas en mortero fabricado con tres tipos de cemento a los que se ha sometido a un proceso de carbonatación acelerada. La relación entre i_corr y R_ohm es muy similar en todos los casos y sugiere que la resistencia del hormigón puede actuar como un factor controlante de la velocidad de corrosión de las armaduras.

Electrica.l Insta.lla.tions in Multi-storey Buildings

African Journals Online (AJOL)

different diversity factors of the individual sections. However .... auxiliary drives for the heating system and ventila- tion, as well as ... For multi-storey buildings preference is generally given to ... Group p. f correction is expedient if large banks of.

Fault detection in the electrical equipment of the artificial system, used for the oil production in marine platforms; Deteccion de fallas en los equipos electricos del sistema artificial, utilizado para la produccion de petroleo en plataformas marinas

Energy Technology Data Exchange (ETDEWEB)

Vargas H, Vicente; Rosales S, Inocente [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico); Pimentel M, Jorge [Petroleos Mexicanos (Mexico)

2007-07-01

At present, PEMEX is using new artificial pumping systems for the production of oil, specifically the Electro Centrifugal Pumping system (ECP). Nevertheless, during the operation of the (ECP) system problems by the failure of their electrical components have appeared, mainly of the equipment installed within the well. The faults have resulted in an increased cost for the diminution in the production and the maintenance cost of the remedial work. The maintenance personnel have procedures to perform verification tests of the conditions of the bottom electrical equipment. But, in the case of an electrical failure of the equipment, its location cannot be determined, since they are installed at 3,600 m from the production wellhead. In accordance with the former, the Instituto de Investigaciones Electricas proposed the application of the reflectometry technique in the time domain, to complement the maintenance procedures. This technique is a very useful diagnosis tool of the electrical equipment, which helps in the decision making of the maneuvers of preventive and corrective maintenance to be followed, with the consequent saving of resources. [Spanish] Actualmente, PEMEX esta utilizando nuevos sistemas artificiales de bombeo para la produccion de petroleo, en especifico el Sistema de Bombeo Electrocentrifugo (BEC). Sin embargo, durante la operacion del Sistema BEC se han presentado problemas por la falla de sus componentes electricos, sobre todo del equipo instalado dentro del pozo. Las fallas han resultado con un costo elevado por la disminucion en la produccion y por los trabajos de mantenimiento correctivo. El personal de mantenimiento cuenta con procedimientos para realizar pruebas de verificacion del estado de los equipos electricos de fondo. Pero, en el caso de una falla electrica de los equipos, no se puede determinar su ubicacion, dado que se instalan a 3,600 m del cabezal del pozo de produccion. De acuerdo con lo anterior, el Instituto de Investigaciones

Advantages and disadvantages in the use of a variable system velocity-motor; Ventajas y desventajas en el uso de un sistema variador de velocidad-motor

Energy Technology Data Exchange (ETDEWEB)

Nunez Perez, J. [Baldor de Mexico (Mexico)

1997-12-31

At present every time is more costly to generate the electric power utilized in all of the aspects of our society. The energy savings by means of a variable velocity device is focussed to the industrial sector, where the electric motor consumes a significant part of the total electricity utilized. The electric power suffers losses right from its generation stage, then through the transmission stage by means of the distribution networks and its conversion into mechanical energy. From these losses the more important ones are the first and the last stage, therefore the end users have a great savings potential by optimizing their electric power consumption. Evidently, the use of variable velocity devices in A.C. (also known as inverters o frequency variators) as well as in D.C. or rectifiers, have disadvantages, such as the generation of harmonics and noise on the power transmission lines inside the factory as well as in the city power lines. This paper discusses the savings that can be obtained by he use of these devices and how to counteract their disadvantages. [Espanol] En la actualidad es cada vez mas costoso producir la energia electrica que se utiliza en todos los aspectos de nuestra sociedad. El enfoque de ahorro de energia usando un variador de velocidad para motores, sera el sector industrial, donde los motores electricos constituyen una parte importante del consumo de electricidad. La energia electrica sufre perdidas desde su etapa de generacion, en su etapa de transmision por medio de redes de distribucion y en su transformacion a energia mecanica. De estas perdidas, las mas cuantiosas son la primera y la ultima etapa, por lo que los usuarios finales tienen un gran potencial de ahorro si optimizan su consumo de energia electrica. Por supuesto que el uso de variadores de velocidad tanto de C.A. (tambien conocidos como inversores o variadores de frecuencia), como de C.D. o rectificadores, tiene algunas desventajas, tal es el caso de la generacion de armonicas

Information system for data management of civil buildings instrumentation in generating power stations; Sistema de informacion para el manejo de datos de la instrumentacion de las obras civiles de las centrales generadoras

Energy Technology Data Exchange (ETDEWEB)

Alvarado, Alonso; Escamilla, Juan Carlos; Alaniz, Felipe de Jesus [Instituto de Investigaciones Electricas, Cuernavaca (Mexico); Gonzalez, Francisco; Mena, Enrique [Comision Federal de Electricidad, Mexico, D. F. (Mexico)

1997-12-31

A relevant task performed by Comision Federal de Electricidad (CFE) is the analysis of the structural behavior and safety assessment of the country`s large electric energy generating stations. This task is performed capturing, revising an analyzing the information generated by measuring instruments installed in the power station civil structures. Such activity generates a large amount of data and the collection, analysis and assessment is a long and tiresome process; additionally, the generated information is kept in plain isolated files, that causes sluggishness in the process and delays in the access to the information. This article describes the characteristics of the Information System for Structure Measurements (Sistema de Informacion de Medicion de Estructuras) (SIME), developed by the Instituto de Investigaciones Electricas (IIE) for CFE in order to enhance the opportunity for the information management. SIME captures, arranges, stores and reports the data obtained from the measurements at the works with great efficiency and flexibility. This system is part of another of greater scope with which CFE will ensure an optimum operation condition of its civil buildings. [Espanol] Una tarea relevante que realiza la Comision Federal de Electricidad (CFE) es analizar el comportamiento estructural y evaluar la seguridad de las grandes obras generadoras de energia electrica del pais. Esta tarea la realiza capturando, revisando y analizando la informacion que generan instrumentos de medicion instalados en las estructuras civiles de las centrales. Tal actividad genera gran cantidad de datos y el proceso de recopilacion, analisis y evaluacion es tardado y tedioso; ademas, la informacion que se genera se guarda en archivos planos aislados, lo que ocasiona lentitud en el proceso y retraso en el acceso a la informacion. Este articulo describe las caracteristicas del Sistema de Informacion de Medicion de Estructuras (SIME) desarrollado por el Instituto de Investigaciones

Advantages and disadvantages in the use of a variable system velocity-motor; Ventajas y desventajas en el uso de un sistema variador de velocidad-motor

Energy Technology Data Exchange (ETDEWEB)

Nunez Perez, J [Baldor de Mexico (Mexico)

1998-12-31

At present every time is more costly to generate the electric power utilized in all of the aspects of our society. The energy savings by means of a variable velocity device is focussed to the industrial sector, where the electric motor consumes a significant part of the total electricity utilized. The electric power suffers losses right from its generation stage, then through the transmission stage by means of the distribution networks and its conversion into mechanical energy. From these losses the more important ones are the first and the last stage, therefore the end users have a great savings potential by optimizing their electric power consumption. Evidently, the use of variable velocity devices in A.C. (also known as inverters o frequency variators) as well as in D.C. or rectifiers, have disadvantages, such as the generation of harmonics and noise on the power transmission lines inside the factory as well as in the city power lines. This paper discusses the savings that can be obtained by he use of these devices and how to counteract their disadvantages. [Espanol] En la actualidad es cada vez mas costoso producir la energia electrica que se utiliza en todos los aspectos de nuestra sociedad. El enfoque de ahorro de energia usando un variador de velocidad para motores, sera el sector industrial, donde los motores electricos constituyen una parte importante del consumo de electricidad. La energia electrica sufre perdidas desde su etapa de generacion, en su etapa de transmision por medio de redes de distribucion y en su transformacion a energia mecanica. De estas perdidas, las mas cuantiosas son la primera y la ultima etapa, por lo que los usuarios finales tienen un gran potencial de ahorro si optimizan su consumo de energia electrica. Por supuesto que el uso de variadores de velocidad tanto de C.A. (tambien conocidos como inversores o variadores de frecuencia), como de C.D. o rectificadores, tiene algunas desventajas, tal es el caso de la generacion de armonicas

Information system for data management of civil buildings instrumentation in generating power stations; Sistema de informacion para el manejo de datos de la instrumentacion de las obras civiles de las centrales generadoras

Energy Technology Data Exchange (ETDEWEB)

Alvarado, Alonso; Escamilla, Juan Carlos; Alaniz, Felipe de Jesus [Instituto de Investigaciones Electricas, Cuernavaca (Mexico); Gonzalez, Francisco; Mena, Enrique [Comision Federal de Electricidad, Mexico, D. F. (Mexico)

1998-12-31

A relevant task performed by Comision Federal de Electricidad (CFE) is the analysis of the structural behavior and safety assessment of the country`s large electric energy generating stations. This task is performed capturing, revising an analyzing the information generated by measuring instruments installed in the power station civil structures. Such activity generates a large amount of data and the collection, analysis and assessment is a long and tiresome process; additionally, the generated information is kept in plain isolated files, that causes sluggishness in the process and delays in the access to the information. This article describes the characteristics of the Information System for Structure Measurements (Sistema de Informacion de Medicion de Estructuras) (SIME), developed by the Instituto de Investigaciones Electricas (IIE) for CFE in order to enhance the opportunity for the information management. SIME captures, arranges, stores and reports the data obtained from the measurements at the works with great efficiency and flexibility. This system is part of another of greater scope with which CFE will ensure an optimum operation condition of its civil buildings. [Espanol] Una tarea relevante que realiza la Comision Federal de Electricidad (CFE) es analizar el comportamiento estructural y evaluar la seguridad de las grandes obras generadoras de energia electrica del pais. Esta tarea la realiza capturando, revisando y analizando la informacion que generan instrumentos de medicion instalados en las estructuras civiles de las centrales. Tal actividad genera gran cantidad de datos y el proceso de recopilacion, analisis y evaluacion es tardado y tedioso; ademas, la informacion que se genera se guarda en archivos planos aislados, lo que ocasiona lentitud en el proceso y retraso en el acceso a la informacion. Este articulo describe las caracteristicas del Sistema de Informacion de Medicion de Estructuras (SIME) desarrollado por el Instituto de Investigaciones

The opening of the Mexican electric sector to foreign investment. Volume 1; La apertura externa en el sector electrico Mexicano. Volumen 1

Energy Technology Data Exchange (ETDEWEB)

Quintanilla Martinez, Juan [eds.] [Universidad Nacional Autonoma de Mexico, Mexico, D. F. (Mexico)

1997-12-31

This document is the first one of three volumes of the 1. Seminar on the Current Conditions and Perspectives of the Electric Sector in Mexico, organized by the Programa Universitario de Energia and the Instituto de Investigaciones Economicas (University Program of Energy and the Institute of Economic Research, both of them agencies of the Universidad Nacional Autonoma de Mexico (UNAM)). The titles of the three volumes are the following: Volume 1.- The opening of the Mexican Electric Sector to foreign investment. Volume 2.- Concrete innovation and technological learning experiences at the Luz y Fuerza del Centro enterprise. Volume 3.- The Electric Energy and the Environment in Mexico. This first volume deals on the World tendencies towards the privatization; the new financing techniques and the reorganization of the Mexican electric industry; the electric rates in the residential sector; the distribution of the income and the electricity expense in Mexican homes, the privatization of the energy in Mexico and the production costs in generation projects planning. These documents were formulated by specialists of the Electric Sector, from the Electric Sector itself as well as from academic entities, public and private [Espanol] Este documento constituye el primero de tres volumenes del Primer Seminario sobre Situacion y Perspectivas del Sector Electrico en Mexico, organizado por el Programa Universitario de Energia y el Instituto de Investigaciones Economicas, ambas dependencias de la Universidad Nacional Autonoma de Mexico (UNAM). Los titulos de los tres volumenes son los siguientes: volumen 1: La apertura externa del sector electrico mexicano, volumen 2: Experiencias concretas de innovacion y aprendizaje tecnologico en la empresa Luz y Fuerza del Centro, volumen 3: Energia electrica y medio ambiente en Mexico. Este primer volumen trata sobre las tendencias mundiales hacia la privatizacion; las nuevas tecnicas de financiamiento y reorganizacion de la industria

Pion polarizability in nonlocal quark model

International Nuclear Information System (INIS)

Efimov, G.V.; Okhlopkova, V.A.

1978-01-01

The γγ→ππ amplitude was calculated in nonlocal quark model in the fourth order on the perturbation theory. The coefficients of electric[a) and magnetic polarizability (β) determined are equal in magnitude and opposite in sign αsub(π+-)=βsub(π+-)=+0.014α/msub(π)sup(3), αsub(πsup(0))=-βsub(πsup(0))=-0.07α/msub(π)sup(3). The results have been compared with calculations in other models

Location Capability and Site Characterization Installing a Borehole VBB Seismometer: the OGS Experience in Ferrara (Italy)

Science.gov (United States)

Pesaresi, D.; Barnaba, C.

2014-12-01

The Centro di Ricerche Sismologiche (CRS, Seismological Research Centre) of the Istituto Nazionale di Oceanografia e di Geofisica Sperimentale (OGS, Italian National Institute for Oceanography and Experimental Geophysics) in Udine (Italy) after the strong earthquake of magnitude M=6.4 occurred in 1976 in the Italian Friuli-Venezia Giulia region, started to operate the Northeastern Italy Seismic Network: it currently consists of 19 very sensitive broad band and 17 simpler short period seismic stations, all telemetered to and acquired in real time at the OGS CRS data centre in Udine. The southwestern edge of the OGS seismic network stands on the Po alluvial basin: earthquake localization and characterization in this area is affected by the presence of soft alluvial deposits. Following the ML=5.9 earthquake that struck the Emilia region around Ferrara in Northern Italy on May 20, 2012, a cooperation of Istituto Nazionale di Geofisica e Vulcanologia, OGS, the Comune di Ferrara and the University of Ferrara lead to the reinstallation of a previously existing very broad band (VBB) borehole seismic station in Ferrara and to the deployment of a temporary seismographic network consisting of eight portable seismological stations, to record the local earthquakes that occurred during the seismic sequence. The aim of the OGS intervention was on one hand to extend its real time seismic monitoring capabilities toward South-West, including Ferrara and its surroundings, and on the other hand to evaluate seismic site responses in the area. We will introduce details of the Ferrara VBB borehole station and the OGS temporary seismographic network configuration and installation. We will then illustrate the location capability performances, and finally we will shortly describe seismic site characterization with surface/borehole comparisons in terms of seismic noise, site amplification and resonance frequencies.

Satellite traces, range spread-F occurrence, and gravity wave propagation at the southern anomaly crest

Energy Technology Data Exchange (ETDEWEB)

Cabrera, M.A. [Universidad Tecnologica Nacional, Tucuman (Argentina). CIASUR, Facultad Regional Tucuman; Universidad Nacional de Tucuman (Argentina). Lab. de Ionosfera; Pezzopane, M.; Zuccheretti, E. [Istituto Nazionale di Geofisica e Vulcanologia, Rome (Italy); Ezquer, R.G. [Universidad Tecnologica Nacional, Tucuman (Argentina). CIASUR, Facultad Regional Tucuman; Universidad Nacional de Tucuman (Argentina). Lab. de Ionosfera; Consejo Nacional de Investigaciones Cientificas y Tecnicas, Buenos Aires (Argentina)

2010-07-01

Range spread-F (RSF) and occurrence of ''satellite'' traces prior to RSF onset were studied at the southern peak of the ionospheric equatorial anomaly (EA). Ionograms recorded in September 2007 at the new ionospheric station of Tucuman, Argentina (26.9 S, 294.6 E, dip latitude 15.5 S), by the Advanced Ionospheric Sounder (AIS) developed at the Istituto Nazionale di Geofisica e Vulcanologia (INGV), were considered. Satellite traces (STs) are confirmed to be a necessary precursor to the appearance of an RSF trace on the ionograms. Moreover, an analysis of isoheight contours of electron density seems to suggest a relationship between RSF occurrence and gravity wave (GW) propagation. (orig.)

SEISMIC STUDY OF THE AGUA DE PAU GEOTHERMAL PROSPECT, SAO MIGUEL, AZORES.

Science.gov (United States)

Dawson, Phillip B.; Rodrigues da Silva, Antonio; Iyer, H.M.; Evans, John R.

1985-01-01

A 16 station array was operated over the 200 km**2 central portion of Sao Miguel utilizing 8 permanent Instituto Nacional de Meterologia e Geofisica stations and 8 USGS portable stations. Forty four local events with well constrained solutions and 15 regional events were located. In addition, hundreds of unlocatable seismic events were recorded. The most interesting seismic activity occurred in a swarm on September 6 and 7, 1983 when over 200 events were recorded in a 16 hour period. The seismic activity around Agua de Pau was centered on the east and northeast slopes of the volcano. The data suggest a boiling hydrothermal system beneath the Agua de Pau volcano, consistent with a variety of other data.

Analysis and adaptation of a mathematical model for the prediction of solar radiation; Analisis y adaptacion de un modelo matematico de prediccion de radiacion solar

Energy Technology Data Exchange (ETDEWEB)

Zambrano, Lorenzo [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1987-12-31

There is an abundant, reliable, free, source of energy whose use can be planned and besides, practicably inexhaustible: the solar energy. In Mexico it constitutes an important resource, because of its geographical position; for this reason it is fundamental to know it well, either by means of measurements conducted for several years or by mathematical models. These last ones predict with meteorological variables, the values of the solar radiation with acceptable precision. At the Instituto de Investigaciones Electricas (IIE) a model is studied for the prediction of the solar radiation to be adapted to the local conditions of Mexico. It is used in simulation studies of the solar plants functioning and other solar systems. [Espanol] Existe una fuente de energia abundante, confiable, gratuita, cuyo uso puede planearse y, ademas, es practicamente inagotable: la solar. En Mexico constituye un recurso importante, por la posicion geografica del pais; por eso es fundamental conocerlo bien, ya mediante mediciones realizadas durante algunos anos, ya mediante modelos matematicos. Estos ultimos predicen, con datos de variables meteorologicas, los valores de la radiacion solar con precision aceptable. En el Instituto de Investigaciones Electricas (IIE) se estudia un modelo de prediccion de radiacion solar para adaptarlo a las condiciones locales de Mexico. Se usa en estudios de simulacion del funcionamiento de plantas helioelectricas y otros sistemas solares.

Adjustable movable capacitors bank at 20 or 30 MVAr in 115 kV; Banco movil de capacitores ajustable a 20 o 30 MVAr en 115 kV

Energy Technology Data Exchange (ETDEWEB)

Ponce Velez, Marco A; Lopez Velazquez, Juan Jose [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico); Lopez Tagle, Alfredo; Aragon Garcia, Hector [Comision Federal de Electricidad (Mexico)

1999-07-01

The use of fixed capacitors banks in distribution and transmission systems is a useful tool to compensate the demand of reactive power and the drop of voltage of the power lines. Nevertheless, unforeseen happenings can be originated that could cause decompensation in the system reliability. Due to the previous fact, the Transmission and Transformation Coordinator (CTT) of the Comision Federal de Electricidad (CFE) asked for the design and the construction of a movable bank of capacitors for an emergent compensation of reactive power. In this article it is presented the most relevant of the design, the construction and the operation of the movable bank of capacitors developed in the Instituto de Investigaciones Electricas (IIE). [Spanish] El empleo de bancos capacitadores fijos en los sistemas de distribucion y transmision es una herramienta util para compensar la demanda de reactivos y la caida de tension de las lineas. Sin embargo, se pueden originar imprevistos que descompensan la confiabilidad del sistema. Debido a lo anterior, la Coordinadora de Transmision y Transformacion (CTT) de la Comision Federal de Electricidad (CFE) solicito el diseno y la construccion de un banco movil de capacitores para una compensacion emergente de potencia reactiva. En este articulo se presenta lo mas relevante del diseno, la construccion y la operacion del banco movil de capacitores desarrollado en el Instituto de Investigaciones Electricas (IIE).

Wind power prognosis statistical system; Sistema estadistico de pronostico de la energia eoloelectrica

Energy Technology Data Exchange (ETDEWEB)

Rodriguez Garcia, Alfredo; De la Torre Vega, Eli [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2009-07-01

The integration of the first Aeolian farm of large scale (La Venta II) to the National Interconnected System requires taking into account the random and discontinuous nature of the Aeolian energy. An important tool, for this task, is a system for the prognosis of the Aeolian energy in the short term. For this reason, the Instituto of Investigaciones Electricas (IIE) developed a statistical model to realize this prognosis. The prediction is done through an adaptable linear combination of alternative competing models, where the weights given to each model are based on its more recent prognosis quality. Also, the application results of the prognoses system are presented and analyzed. [Spanish] La integracion de la primera grana eolica de gran escala (La Venta II) al Sistema Interconectado Nacional requiere tomar en cuenta la naturaleza aleatoria y discontinua de la energia eolica. Una importante herramienta, para esta tarea, es un sistema para el pronostico de la energia eolica a corto plazo. Por ello, el Instituto de Investigaciones Electricas (IIE) desarrollo un modelo estadistico para realizar este pronostico. La prediccion es hecha a traves de una combinacion lineal adaptable de modelos competidores alternativos, donde los pesos dados a cada modelo estan basados en su mas reciente calidad de pronostico. Tambien se presentan y analizan los resultados de la aplicacion del sistema de pronosticos.

Evaluation and diagnosis of the cathodic protection of ducts in the left margin of the Tonala River of the Superintendencia General de Ductos Minatitlan; Evaluacion y diagnostico de la proteccion catodica en la margen izquierda del Rio Tonala de la Superintendencia General de Ductos Minatitlan

Energy Technology Data Exchange (ETDEWEB)

Gonzalez N, Miguel A; Malo T, Jose M; Munoz Ledo C, Ramon; Uruchurtu C, Jorge; Castrejon G, Rafael [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico); Sanchez G, Luis; Algarra M, Raul; Abreu L, Emilio [Gerencia de Mantenimiento, Pemex (Mexico)

2003-07-01

The present study contains the measurements obtained as a part of the evaluation of the protection system of ducts located in the left margin of the Tonal River, made by the Gerencia de Materiales y Procesos Quimicos of the Instituto de Investigaciones Electricas (IIE) during the last trimester of year 2001. Also, the measurements of potential in conditions of instantaneous ignition and extinguished in measuring posts of the duct in Rights of Way (DDV) Tonala-Nudo Teapa 23 are studied, in order to determine the real protection level reached by the cathodic protection system, the possible unprotected zones and the possible corrective measures that lead to a safe operation of the ducts. [Spanish] El presente estudio contiene las mediciones obtenidas como parte de la evaluacion del sistema de proteccion de los ductos ubicados en la margen izquierda del rio Tonala, realizadas por la Gerencia de Materiales y Procesos Quimicos del Instituto de Investigaciones Electricas (IIE) durante el ultimo trimestre del ano 2001. Asimismo, se tratan las mediciones de potencial en condiciones de encendido y apagado instantaneo en postes de medicion del ducto en los Derechos De Via (DDV) Tonala-Nudo Teapa 23, con el proposito de determinar el nivel real de proteccion alcanzado por el sistema de proteccion catodica, las posibles zonas desprotegidas y las posibles medidas correctivas que conduzcan a una operacion segura de los ductos.

Proceedings of the 24. National seminar on the rational use of energy and exposition of equipment and services and 7. Binational seminar on energy saving [Selected Papers]; 24. Seminario nacional sobre el uso racional de energia y exposicion de equipos y servicios y 7. Seminario binacional de ahorro de energia. Memoria Tecnica. [Ponencias seleccionadas

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

This document contains the technical briefings of the 24. National Seminar on the rational use of energy, and exhibition of the equipment and services and the 7. Binational seminar on energy saving, organized by the Asociacion de Profesionistas y Tecnicos en Aplicacion Energetica (ATPAE), in Ciudad Juarez, Chihuahua, Mexico, from November 9 to 11, 2005. This seminar dealt with subjects such as: electrical energy saving, energy distribution, solar energy, energy saving in compressed air, biomass, administration and control of the demand of the electrical energy, bioclimatic architecture, use of the compressed natural gas, renewable energy, co-generation, qualification and consultancy for the intelligent use of the energy in PyMES. [Spanish] Este documento contiene la memoria tecnica del 24 Seminario Nacional sobre el uso racional de energia, y exposicion de los equipos y servicios y el 7 Seminario binacional de ahorro de energia, organizado por la Asociacion de Tecnicos y Profesionistas en Aplicacion Energetica (ATPAE), en Ciudad Juarez, Chihuahua, Mexico, del 9 al 11 de noviembre del 2005. Este seminario trato temas tales como: ahorro de energia electrica, distribucion de la energia, energia solar, ahorro de energia en aire comprimido, biomasa, administracion y control de la demanda de la energia electrica, arquitectura bioclimatica, uso del gas natural comprimido, energia renovable, cogeneracion, capacitacion y consultoria para el uso inteligente de la energia en las Pymes.

Starting of the steam generator of a fossil fuel power plant, using predictive control based in a neuronal model; Arranque del generador de vapor de una central termoelectrica, usando control predictivo basado en un modelo neuronal

Energy Technology Data Exchange (ETDEWEB)

Gallardo Dominguez, Tonatiuh

2004-09-15

In this thesis work it is presented the design and implementation of a simulator of total scope of a predictive controller based in the neuronal model of the temperature in two stages of the heating of the steam generator of a fossil fuel power plant. An implemented control scheme is detailed, as well as the methodology for the identification of a neuronal model utilized for the control. Finally the results of the implementation in the simulator located at the Instituto de Investigaciones Electricas (IIE) are shown to be satisfactory. This control structure is not applied directly in closed circuit, but provides the value of the control actions to a human operator. [Spanish] En este trabajo de tesis se presenta el diseno e implementacion, en un simulador de alcance total, de un controlador predictivo basado en un modelo neuronal para el control de la temperatura en dos etapas del calentamiento del generador de vapor de una central termoelectrica. Se detalla el esquema de control implementado, asi como la metodologia de identificacion de un modelo neuronal utilizado para la sintesis del control. Finalmente se muestran los resultados de la implementacion en el simulador que se encuentra en el Instituto de Investigaciones Electricas (IIE); dichos resultados fueron satisfactorios. Esta estructura de control no se aplica directamente en lazo cerrado, sino que provee el valor de las acciones de control a un operador humano.

Analysis and adaptation of a mathematical model for the prediction of solar radiation; Analisis y adaptacion de un modelo matematico de prediccion de radiacion solar

Energy Technology Data Exchange (ETDEWEB)

Zambrano, Lorenzo [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1986-12-31

There is an abundant, reliable, free, source of energy whose use can be planned and besides, practicably inexhaustible: the solar energy. In Mexico it constitutes an important resource, because of its geographical position; for this reason it is fundamental to know it well, either by means of measurements conducted for several years or by mathematical models. These last ones predict with meteorological variables, the values of the solar radiation with acceptable precision. At the Instituto de Investigaciones Electricas (IIE) a model is studied for the prediction of the solar radiation to be adapted to the local conditions of Mexico. It is used in simulation studies of the solar plants functioning and other solar systems. [Espanol] Existe una fuente de energia abundante, confiable, gratuita, cuyo uso puede planearse y, ademas, es practicamente inagotable: la solar. En Mexico constituye un recurso importante, por la posicion geografica del pais; por eso es fundamental conocerlo bien, ya mediante mediciones realizadas durante algunos anos, ya mediante modelos matematicos. Estos ultimos predicen, con datos de variables meteorologicas, los valores de la radiacion solar con precision aceptable. En el Instituto de Investigaciones Electricas (IIE) se estudia un modelo de prediccion de radiacion solar para adaptarlo a las condiciones locales de Mexico. Se usa en estudios de simulacion del funcionamiento de plantas helioelectricas y otros sistemas solares.

Social Corporate Responsibility regarding Household Consumer Satisfaction with the Electric Power Supply Services

Directory of Open Access Journals (Sweden)

Maria-Ana Georgescu

2014-02-01

Full Text Available The issue of the practical manifestation of corporate social responsibility towards consumers is highly important to the socio-economic reality in Romania. The present paper is the result of an investigation carried out in this field and it is distinguished by two aspects. The first aspect is its target audience used for research - household consumers of electricity, who can be called "vulnerable", captive consumers. The second aspect is the specificity of the electricity market. The aim of the research was to study the relationship between corporate social responsibility, instantiated by the quality of services provided by S.C. Electrica S.A. – Electrica Distribution and Supply South Transylvania and the consumers' loyalty towards the company, in case other electricity suppliers emerge. A subsidiary aspect was the generation of a database having an impact on customer retention. We have carried out some quantitative research, based on the survey method, having a sample of 521 household consumers from the Mures County. The study we carried out proves that consumer satisfaction, their degree of satisfaction under different aspects, is a way of gaining their trust on this particular market. Those consumers with a higher degree of trust in the company are more loyal. This will result in reducing migration to another electricity supplier, in the future, when all household consumers become eligible.

Notes on the Start-Up of the Latina Power Station; Notes concernant le demarrage de la centrale nucleaire de Latina; Zapusk ehlektrostantsii Latina; Notas sobre la puesta en marcha de la central electrica de Latina

Energy Technology Data Exchange (ETDEWEB)

Calabria, G.; Gualtieri, G. [AGIP Nucleare, Milano (Italy)

1963-10-15

desarrollo de los ensayos finales, sobre la carga del combustible y el orden en que se ejecutaron las operaciones de puesta en marcha y sobre las determinaciones y maniobras de regulacion posteriores al estado critico. Se resenan asimismo las operaciones iniciales de generacion y conexion de la central con la red electrica. Por ultimo, se mencionan los problemas de organizacion derivados de la explotacion de la central, incluyendo la preparacion y formacion profesional del personal y las medidas de seguridad adoptadas. (author) [Russian] Privoditsya informatsiya o zapuske pervoj ital'yanskoj atomnoj ehlektrostantsii Latina moshchnost'yu 200 mgvt. Reaktor rabotaet na prirodnom urane s grafitovym zamedlitelem i gazovym okhlazhdeniem. Posle kratkogo opisaniya osnovnykh kharakteristik ehlektrostantsii privodyatsya podrobnye dannye otnositel'no provedeniya zaklyuchitel'nykh ispytanij stantsii'', toplivnoj zagruzki i poryadka ehkspluatatsii, izmerenij i upravleniya s dovedeniem do kriticheskogo sostoyaniya. Daetsya ob''yasnenie raboty po zapusku i vklyucheniyu stantsii v ehlektroset'. Izlagayutsya takzhe problemy, svyazannye s ehkspluatatsiej stantsii, v tom chisle podgotovka personela i ego kvalifikatsiya, mery po bezopasnosti. (author)

Construction of an electrolytic photocell fuel cell system used to energize a cellular telephone; Construccion de un sistema fotocelda-electrolizador-celda de combustible, utilizado para energizar un telefono celular

Energy Technology Data Exchange (ETDEWEB)

Fuentes Quezada, Eduardo; Rodriguez-Castellanos, A.; Solorza Feria, O. [CINVESTAV-IPN, Mexico, D.F. (Mexico)]. E-mail: edfq_1986@hotmail.com

2009-09-15

de carbono que es liberado a la atmosfera, ademas de contribuir en gran parte al calentamiento global del planeta. Una alternativa para la generacion de energia electrica es la utilizacion de celdas de combustible de membrana polimerica (PEMFC) las cuales promoveran la utilizacion de combustibles alternos como el hidrogeno. En este trabajo se presenta la puesta en operacion de un sistema constituido por una celda fotovoltaica un electrolizador y una PEMFC. La celda fotovoltaica trasforma la energia solar en electrica con la que se electroliza el agua proporcionando hidrogeno (combustible) y oxigeno (comburente). Se diseno y construyo un electrolizador el cual fue caracterizado mediante ensayos de polarizacion. Los gases obtenidos del electrolizador son alimentados a una celda de combustible disenada y construida en el laboratorio. Para darle aplicacion a este trabajo la energia producida en la celda de combustible es alimentada a un dispositivo de baja potencia como lo es la carga electrica de un telefono movil. La integracion de dispositivos electroquimicos revolucionaran por completo las fuentes de energia que hoy en dia estan basadas en los derivados del petroleo. Estos sistemas integrados son eficientes para la produccion de energia electrica sin emisiones de gases contaminantes.

A new cascaded hydropower plants in El Sheikh Zayed Canal in the new valley in Egypt

Energy Technology Data Exchange (ETDEWEB)

Hosny Fahmy, Faten [Electronics Research Institute, Cairo (Egypt)

2000-07-01

industria, el transporte, las comunicaciones y los caminos, asi como servicios sociales salud y educacion, los cuales dirigiran a Egipto a los horizontes del siglo XXI. Estos nuevos proyectos son los de Toshka, Nuevo Valle o Nuevo Delta y Sheikh Zayed que alimentaran mas de un millon de almas, transformando el desierto en una alfombra verde, moviendo las ruedas de las industrias y despojandose de la pesadilla de muerte sobre un asfixiante valle estrecho. Este articulo presenta una nueva idea y aplicacion para saber utilizar el flujo del agua desde el lago Nasser despues de elevar y bombear a cierta velocidad de acuerdo al declive del suelo. Una serie de plantas hidroelectricas estan disenadas en ciertos puntos de interes en el Canal El Sheikh Zayed para generar energia electrica que se necesitara para alimentar varios proyectos en este nuevo valle. Los resultados muestran la comparacion entre estas ocho plantas hidroelectricas o sea: Su generacion electrica, su liberacion de agua por energia electrica generada, almacenamiento de agua y carga hidraulica de cada una. El estudio contiene tambien modelos matematicos de cada planta hidroelectrica y la descripcion matematica de cada embalse, represas y planta electrica.

Transport and operation of Spanish electrical system; El transporte y la operacion del sistema electrico en Espana

Energy Technology Data Exchange (ETDEWEB)

Mielgo Alvarez, P.

1998-12-01

The article summarized the institutional organization of the electric sector in Spain during recent years, up to the deregulation phase initial by the Electricity Sector Act. approved in november 1997. It includes a review of the regulation an retribution of the transmission, system operation and network management activities, as well as a description of the development and capabilities of Red Electrica as the company to which these central functions are assigned, and also of the legal limitations, and the opportunities opened by the new legal framework. (Author)

Integrating of renewable energy in operation system: the Special Regime Control Centre (CECRE); Integracion de la energia renovable en la operacion del sistema: El Centro de Control de regimen especial (CECRE)

Energy Technology Data Exchange (ETDEWEB)

Division, M.

2007-07-01

The implementation of Red Electrica de Espana Special Regime Control Centre (CECRE) has demonstrated the Spanish System Operators commitment of integrating the maximum possible wind power generation into the electrical system compatible with secure operation. With this leadership initiative,for the first time in the world, a System Operator Control Centre (CECRE) has succeeded in sending power control instructions to wind power generators over the country through Generation Control Centres (CGC) to which these generators must be connected complying with the Spanish Rules. (Author)

Integrating of renewable energy in operation system: the Special Regime Control Centre (CECRE)

International Nuclear Information System (INIS)

Division, M.

2007-01-01

The implementation of Red Electrica de Espana Special Regime Control Centre (CECRE) has demonstrated the Spanish System Operators commitment of integrating the maximum possible wind power generation into the electrical system compatible with secure operation. With this leadership initiative,for the first time in the world, a System Operator Control Centre (CECRE) has succeeded in sending power control instructions to wind power generators over the country through Generation Control Centres (CGC) to which these generators must be connected complying with the Spanish Rules. (Author)

Jõulujazz alustab heaga / Kai Ilustrumm

Index Scriptorium Estoniae

Ilustrumm, Kai

2004-01-01

Heategevuskontserdist "Aita alustada elu!" Kaarli kirikus 28. nov., Soome multiinstrumentalisti Sakari Kukko trio kontserdist 5. dets. Niguliste muuseum-kontserdisaalis, ameerika vokaalansambli M-Pact kontserdist 7. dets. Pärnu kontserdimajas, Raivo Tafenau-Meelis Vindi koosmusitseerimisest tšiili löökpillimängija Ricardo Padillaga 11. dets. Niguliste muuseum-kontserisaalis, Helin-Mari Arderi kontserdist "Sajab esimest lund" 15. dets. Niguliste muuseum-kontserisaalis, rootsi ansambli Bossa Electrica esinemiset 16. dets. Rock Café's, ansambli Eesti Keeled kontserdist "Vaiksel ööl" 17. dets. Tallinnas Sokos Hotell Virus

An integral approach to the use of probabilistic risk assessment methods

International Nuclear Information System (INIS)

Schwarzblat, M.; Arellano, J.

1987-01-01

In this chapter some of the work developed at the Instituto de Investigaciones Electricas in the area of probabilistic risk analysis are presented. In this area, work has been basically focused in the following directions: development and implementation of methods, and applications to real systems. The first part of this paper describes the area of methods development and implementation, presenting an integrated package of computer programs for fault tree analysis. In the second part some of the most important applications developed for real systems are presented. (author)

América Latina: energía y desarrollo

Directory of Open Access Journals (Sweden)

Gabriel Sánchez S.

1982-09-01

Full Text Available EI autor del presente articulo es Ingeniero Electricista de la Universidad Nacional de Colombia y Master en Anlliisis de Sistemas de Potencia del Renssetaer Polytecnic Institute. ha sido Protesor y Director del Departamento de Ingenieria Electrica. Director del Instituto de Ensayos e Investigación de la Universidad Nacional de Colombia. Jete de la División de Energia del Departamento Nacional de Planeación y Coordinador de Planificación Energetica de la Organización Latinoamericana de Energia, OLADE.

Clean generation of electric energy; Generacion limpia de energia electrica

Energy Technology Data Exchange (ETDEWEB)

Ramirez, Juan M.; Torres, Emmanuel [Centro de Investigacion y de Estudios Avanzados (CINVESTAV), Unidad Guadalajara (Mexico)

2006-10-15

This article deals on the existing alternatives of renewable energy for generation of electricity free from polluting sequels within the Mexican territory and presents a global overview on the electricity generation in Mexico. Wind power, hydraulic energy, biomass, photovoltaic and fuel cells are sources of renewable energy that could contribute to Mexico's sustainable development, for this reason it is discussed on the main sources of renewable energy in Mexico - solar and wind energy, mini-hydraulic, biomass and geothermal -, on their development and evolution, cost, insertion projects and obstacles for their correct development in this country. [Spanish] Este articulo versa sobre las alternativas de energia renovable existentes para una generacion de electricidad libre de secuelas contaminantes dentro del territorio mexicano y presenta un panorama global sobre la generacion de electricidad en Mexico. La energia eolica, hidraulica, biomasa, fotovoltaica y las celdas de combustible son fuentes de energia renovable que podrian contribuir al desarrollo sustentable de Mexico, por esto se arguye sobre las principales fuentes de energia renovable en Mexico -energia solar, eolica, minihidraulica, biomasa y geotermia-, sobre su desarrollo y evolucion, costo, proyectos de insercion y obstaculos para su correcto desarrollo en ese pais.

Evaluacion termica, mecanica y electrica de materiales compuestos cordierita-mullita

Directory of Open Access Journals (Sweden)

M.A. Camerucci

2000-10-01

Full Text Available Commercially available cordierite and mullite powders were used to obtain cordierite and cordierite-30wt% mullite materials by attrition milling, uniaxial pressing and sintering. Cordierite powders were the coarse (D50 = 1.82 mum, medium (D50 = 0.9 mum and fine (D50 = 0.45 mum single granulometric fractions and binary mixtures of them. Mullite powder employed in composites was the 7 h-attrition milled one (D50 = 1.3 mum. Hardness (H V and fracture toughness (K IC were measured by Vickers indentation techniques. Composites showed higher H V and K IC than cordierite matrices. In both materials, H V and K IC diminish with the increasing porosity. Dielectric constant (epsilon and losses (tan delta were determined at 1 MHz. An increase in epsilon and tan delta values was registered when mullite was present in composites with respect to cordierite material. Higher the porosity, epsilon was lower and tan delta increased. The thermal expansion coefficients (alpha were determined up to 1000 °C resulting the alpha of the composite close to that of the silicon.

Worker flag. Independent Electrical Policy; Bandera Obrera. Politica Electrica Independiente

Energy Technology Data Exchange (ETDEWEB)

Bahen, D [Sindicato Unico de Trabajadores de la Industria Nuclear, Salazar, Estado de Mexico C.P. 52045 (Mexico)

2000-07-01

This work analyses the initiative of privatization of the Mexican Electric Industry and also it is showed the incoherence of this mistaken proposal. Along the same line is analysed tthe situation of the National Electric Sector and the working process for the distinct types of electric generation just as the syndical and labor situations. In consequence it is proposed an Independent Electrical Policy, which includes the integration of the Nationalized Electric Industry, the syndical union and the Unique Collective Contract. The purpose of this work is to contribute to the success of the electrical and nuclear struggle always maintaining in rising position the red flag of the proletariat. The author considers that the privatization means mercantilization of the human necessities. The privatization is not inevitable at condition of to exercise consequently the political actions necessary through alternatives includes: the worker control of production, research, and the National Electric strike. (Author)

Transient and steady state analysis in the frequency domain for time-invariant and time variant electrical networks using the algebraic operational matrices approach; Analisis transitorio y de estado estable en el dominio de la frecuencia de redes electricas invariantes y variantes en el tiempo utilizando el enfoque algebraico de las matrices operacionales

Energy Technology Data Exchange (ETDEWEB)

Lazaro Castillo, Isidro Ignacio

1999-02-01

insight in to the properties of time varying networks by using methods of analysis in the frequency domain, which are well established for the analysis of time-invariant networks. The question arises whether these methods can be applied and modified for the analysis of time varying networks. Some possible solutions have been reported in the open literature. In this thesis a efficient solution is reported, which is based on operational matrices and, according to the author's knowledge, it has not been published before. An advantage of the method is that it can be seen as a direct extension of the Ohm's laws and the nodal analysis widely used in power systems for circuit analysis. The results presented in the thesis are validated with time domain simulations. In all cases the results obtained from both solutions matched with a vary low tolerance. [Spanish] En este trabajo el problema de predecir la distorsion armonica es tratado en forma general. El problema es presentado tal que el proceso de solucion no se limita a mantenerlo en el dominio de Fourier porque puede ser manejado en cualquier otro dominio generado por cualquier base dada por toda expansion en series ortogonales, incluidas las series de Fourier. En este trabajo se muestra que las series ortogonales tales como las series Hartley o Walsh pueden ser utilizadas para resolver mas eficientemente los problemas de distorsion armonica que la forma convencional considera en el dominio armonico. De este trabajo es claro que el dominio armonico es un caso particular de la formulacion aqui presentada. La teoria utilizada para presentar y resolver el problema de la distorsion armonica esta basada principalmente en el concepto de las matrices operacionales desarrolladas en las areas de Control y Sistemas. La aproximacion tiene la ventaja de proporcionar un marco de referencia general para resolver problemas de estado estable y dinamico en redes electricas y sistemas en general. Un hecho importante presentado en

Exploitation of biogas in municipal in slaughterhouses: Technical-economical evaluation; Aprovechamiento de biogas en rastros y mataderos municipales: Evaluacion tecnica-economica

Energy Technology Data Exchange (ETDEWEB)

Martinez Hernandez, Donaji A; Castaneda Sanchez, Arlem M; Garcia Galeana, Erika [Universidad Nacional Autonoma de Mexico (UNAM), Facultad de Ingenieria (Mexico)

2009-07-01

ahorro en el consumo de energia electrica. El analisis de este estudio demuestra que el uso de biogas a traves de biodigestores para la generacion de energia electrica, es una opcion rentable para el tratamiento de los residuos, pues el ingreso por la venta de composta, harina de sangre, asi como la disminucion de la tarifa electrica, justifica la inversion inicial. Estos proyectos, seran mas atractivos, si utilizan financiamientos y se inscriben como proyectos MDL.

Utilization of agricultural sugar cane wastes as fuel in modern cogeneration systems applied in sugar cane mills; Aprovechamiento de los residuos agricolas caneras como combustible en sistemas de cogeneracion modernos aplicados a ingenios

Energy Technology Data Exchange (ETDEWEB)

Buendia Dominguez, Eduardo H. [Instituto de Investigaciones Electricas, Cuernavaca (Mexico); De Buen Rodriguez, Odon [Comision Nacional para el Ahorro de la Energia, Mexico, D. F. (Mexico)

1998-12-31

Considering the new legal frame on cogeneration in Mexico, the possibility of heat and electricity supply required by the sugar mills to be made by an independent cogenerator of the sugar mill, operating with the sugar cane bagasse and agricultural sugar cane wastes, has been evaluated. Such modern cogenerator would be characterized, besides operating in an independent way of the sugar mill, by the use of high efficiency equipment in its process of heat and electricity generation. In this sense the Comision Nacional para el Ahorro de Energia (CONAE) through its Coordination Program and the Instituto de Investigaciones Electricas (IIE) carried out a joint project to determine the technical and economical viability that the sugar industry maintains the present sugar production without the need of burning fuel oil, installing adjacent to every sugar mill, a modern cogeneration system, operated by independent producers, that using sugar cane bagasse and agricultural sugar cane wastes, allows the supply of all the steam and electricity required by the sugar mill, and additionally can add firm capacity and the supply of electric power to the national grid, during the grinding season as well as out of grinding season. [Espanol] En consideracion al nuevo marco juridico de la cogeneracion en Mexico se ha evaluado la posibilidad de que el suministro de calor y electricidad requerido por los ingenios azucareros sea proporcionado por un cogenerador independiente de la planta de azucar, el cual opere utilizando el bagazo y residuos agricolas caneras (biomasa canera). Dicho cogenerador moderno se caracterizaria, ademas de operar de manera independiente a la planta de azucar, por el uso de equipos de alta eficiencia en su proceso de produccion de calor y electricidad. En este sentido la Comision Nacional para el Ahorro de Energia (CONAE) a traves de la Coordinacion de Programacion y el Instituto de Investigaciones Electricas (IIE) realizaron un trabajo en conjunto para determinar

Utilization of agricultural sugar cane wastes as fuel in modern cogeneration systems applied in sugar cane mills; Aprovechamiento de los residuos agricolas caneras como combustible en sistemas de cogeneracion modernos aplicados a ingenios

Energy Technology Data Exchange (ETDEWEB)

Buendia Dominguez, Eduardo H [Instituto de Investigaciones Electricas, Cuernavaca (Mexico); De Buen Rodriguez, Odon [Comision Nacional para el Ahorro de la Energia, Mexico, D. F. (Mexico)

1999-12-31

Considering the new legal frame on cogeneration in Mexico, the possibility of heat and electricity supply required by the sugar mills to be made by an independent cogenerator of the sugar mill, operating with the sugar cane bagasse and agricultural sugar cane wastes, has been evaluated. Such modern cogenerator would be characterized, besides operating in an independent way of the sugar mill, by the use of high efficiency equipment in its process of heat and electricity generation. In this sense the Comision Nacional para el Ahorro de Energia (CONAE) through its Coordination Program and the Instituto de Investigaciones Electricas (IIE) carried out a joint project to determine the technical and economical viability that the sugar industry maintains the present sugar production without the need of burning fuel oil, installing adjacent to every sugar mill, a modern cogeneration system, operated by independent producers, that using sugar cane bagasse and agricultural sugar cane wastes, allows the supply of all the steam and electricity required by the sugar mill, and additionally can add firm capacity and the supply of electric power to the national grid, during the grinding season as well as out of grinding season. [Espanol] En consideracion al nuevo marco juridico de la cogeneracion en Mexico se ha evaluado la posibilidad de que el suministro de calor y electricidad requerido por los ingenios azucareros sea proporcionado por un cogenerador independiente de la planta de azucar, el cual opere utilizando el bagazo y residuos agricolas caneras (biomasa canera). Dicho cogenerador moderno se caracterizaria, ademas de operar de manera independiente a la planta de azucar, por el uso de equipos de alta eficiencia en su proceso de produccion de calor y electricidad. En este sentido la Comision Nacional para el Ahorro de Energia (CONAE) a traves de la Coordinacion de Programacion y el Instituto de Investigaciones Electricas (IIE) realizaron un trabajo en conjunto para determinar

Evaluation of avoided carbon dioxide emissions in cogeneration projects; Evaluacion de las emisiones evitadas de bioxido de carbono en proyectos de cogeneracion

Energy Technology Data Exchange (ETDEWEB)

Flores Zamudio, Jesus Antonio; Fernandez Montiel, Manuel Francisco; Alcaraz Calderon, Agustin Moises [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)]. E-mail: jesus.flores@iie.org.mx; mffm@iie.org.mx; malcaraz@iie.org.mx

2010-11-15

In this paper, presents a methodology of how to calculate the emissions of CO{sub 2} (Carbon Dioxide) in cogeneration of plants for evaluate future cases with the type of fuel and fuel flow used in the plant. The methodology was in spreadsheets developed a series of stoichiometric balances. The methodology was done for three types of fossil fuels: solid, liquid and gas. The analysis is made only to the percentages of the items contained in the fuel flow automatically used and results in the combustion products in tons per hour. This method was compared with the results obtained in the software Thermoflow Inc. (Used in Gerencia de Procesos Termicos of Instituto de Investigaciones Electricas for evaluate various process systems that produce energy power) using different cogeneration systems, that is to say about the technology used emissions compared according to the amount of excess air for each type of technology and at one point before the gas cleaning systems. The results can be evaluated for emissions avoided through the fuel type used and developing a cogeneration plant compared to a conventional plant. [Spanish] En este articulo, se presenta una metodologia de como calcular las emisiones de CO{sub 2} (Bioxido de carbono) en plantas de cogeneracion, para evaluar casos a futuro por medio del tipo de combustible y flujo de combustible a utilizar en la planta. La metodologia se realizo en hojas de calculo, donde se desarrollaron una serie de balances estequiometricos. La metodologia se hizo para tres tipos de combustibles fosiles: solido, liquido y gas. El analisis se realiza con solo dar los porcentajes de los elementos que contiene el combustible y el flujo a utilizarse y automaticamente da como resultado los productos de la combustion en toneladas por hora. Esta metodologia se comparo con los resultados obtenidos en el software Thermoflow Inc. (Empleado en la Gerencia de Procesos Termicos del Instituto de Investigaciones Electricas para evaluar diversos

Smart transmission grids - benefits and risks; Redes de transmision inteligente. Beneficios y riesgos

Energy Technology Data Exchange (ETDEWEB)

Velasco-Ramirez, E.; Angeles-Camacho, C. [Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico)]. E-mails: TVelascoR@iingen.unam.mx; CAngelesC@ii.unam.mx; Garcia-Martinez, M. [Instituto Tecnologico de Toluca, Estado de Mexico (Mexico)]. E-mail: mgarciam@ittoluca.edu.mx

2013-01-15

Nowadays the Power Systems are working near their stability limits, for this reason it is necessary and essential a transition to new transmission systems that ensure efficient delivery of electrical energy, with the objective to prevent blackouts that cause significant losses in the economy of any country in the world. This paper analyzes important elements to consider having a healthy and efficient transition from a power grid vertically integrated into a smart transmission grid. A comparative analysis in the model, development, benefits and risks of the implementation of these systems, between two of the main marc of references of smart grids, the EU and the USA is presented. [Spanish] Actualmente los sistemas electricos operan cada vez mas cercanos a sus limites de estabilidad, es por ello que se hace necesaria y primordial la transicion hacia nuevos sistemas de transmision que garanticen la eficiente entrega de la energia electrica, evitando con ello cortes de energia que generan importantes perdidas en la economia de cualquier pais del mundo. En este documento se realiza un analisis de los elementos necesarios para una sana y eficiente transicion de una red de transmision electrica verticalmente, integrada hacia una red de transmision inteligente. Se presenta un analisis comparativo entre dos de los marcos de referencia mas importantes, el de la UE y el de EUA, en el modelo, desarrollo, beneficios y riesgos en la implementacion de estos sistemas.

Long term vision on the use of the renewable energies in Mexico: Solar energy. Second Part: Technologies for the advantage of the solar energy (Annexe 6-II in 'A vision of year 2030 on the use of the renewable energies in Mexico'); Vision a largo plazo sobre la utilizacion de las energias renovables en Mexico: Energia solar. Segunda Parte: Tecnologias para el aprovechamiento de la energia solar (Anexo 6-II en 'Una vision al 2030 de la utilizacion de las energias renovables en Mexico')

Energy Technology Data Exchange (ETDEWEB)

Estrada Gasca, Claudio A; Arancibia Bulnes, Camilo A; Dorantes Rodriguez, Ruben; Islas Samperio, Jorge; Muhlia Velasquez, Agustin [Universidad Nacional Autonoma de Mexico (Mexico)

2005-08-15

Usually one distinguishes two main types of systems of advantage of the solar energy: the photovoltaic and the photo thermal ones. The first ones are those based on the photovoltaic effect, which allows the direct conversion of the energy of the solar radiation in electrical energy. The second ones transform the solar energy into heat, which can be used in a large variety of processes. By the degree of development of both technologies it is advisable to present them in different sections. Also, there is a great variety of technologies of photo thermal systems that we have classified as technologies for the termosolar generation of electrical power, whose temperatures of operation are high, technologies the solar heating at low temperatures and technologies for industrial heat process. [Spanish] Se suele distinguir dos tipos principales de sistemas de aprovechamiento de la energia solar: los fotovoltaicos y los fototermicos. Los primeros son aquellos basados en el efecto fotovoltaico, que permite la conversion directa de la energia de la radiacion solar en energia electrica. Los segundos transforman la energia solar en calor, el cual puede ser utilizado en una gran variedad de procesos. Por el grado de desarrollo de ambas tecnologias es conveniente presentarlas en secciones diferentes. Asi mismo, existe una gran variedad de tecnologias de sistemas fototermicos que hemos clasificado en tecnologias para la generacion termosolar de potencia electrica, cuyas temperaturas de operacion son altas, tecnologias para el calentamiento solar a bajas temperaturas y tecnologias para calor de proceso industrial.

A comparative performance study of a photovoltaic concentrator system with discrete mirror and continuos profile for two different absorber shapes

Energy Technology Data Exchange (ETDEWEB)

H, Saiful; Rezau, K.M [University of Dhaka, Dhaka (Bangladesh)

2000-07-01

Profiles of parabolic concentrators of discrete mirror and continuos surface mirror have been designed for combined electrical thermal photovoltaic systems. In the design the changes of concentration ratio, effect of reflection, angle of incidence over the absorber have been taken into account for maximum energy collection. The performances of the system are studied for solar cells of modified grid finger for illuminations from 1-10 sun. The local concentration ratio (LCR) distribution over the absorbers for both the concentrator, the optical efficiency, thermal efficiency, electrical and thermal power output and overall efficiency have been evaluated for different values of beam radiation concentration ratio and focal distance. [Spanish] Se han disenado perfiles de concentradores parabolicos de espejo discreto y de superficie continua para sistemas fotovoltaicos combinados electricos y termicos. En el diseno los cambios de la proporcion de concentracion, del efecto de la reflexion, del angulo de incidencia sobre el observador se han tenido en cuenta para una maxima recoleccion de energia. Los rendimientos del sistema se han estudiado para celdas solares de parrilla modificada para iluminaciones solares de 1-10. Han sido evaluados para diferentes valores de la proporcion de la concentracion de la radiacion en el rayo y la distancia focal la proporcion de concentracion local (LCR) de la distribucion en los absorbedores, para el concentrador la eficiencia optica, la eficiencia termica, electrica, la produccion de energia termica y electrica y la eficiencia total.

Long term vision on the use of the renewable energies in Mexico: Solar energy. Second Part: Technologies for the advantage of the solar energy (Annexe 6-II in 'A vision of year 2030 on the use of the renewable energies in Mexico'); Vision a largo plazo sobre la utilizacion de las energias renovables en Mexico: Energia solar. Segunda Parte: Tecnologias para el aprovechamiento de la energia solar (Anexo 6-II en 'Una vision al 2030 de la utilizacion de las energias renovables en Mexico')

Energy Technology Data Exchange (ETDEWEB)

Estrada Gasca, Claudio A; Arancibia Bulnes, Camilo A; Dorantes Rodriguez, Ruben; Islas Samperio, Jorge; Muhlia Velasquez, Agustin [Universidad Nacional Autonoma de Mexico (Mexico)

2005-08-15

Usually one distinguishes two main types of systems of advantage of the solar energy: the photovoltaic and the photo thermal ones. The first ones are those based on the photovoltaic effect, which allows the direct conversion of the energy of the solar radiation in electrical energy. The second ones transform the solar energy into heat, which can be used in a large variety of processes. By the degree of development of both technologies it is advisable to present them in different sections. Also, there is a great variety of technologies of photo thermal systems that we have classified as technologies for the termosolar generation of electrical power, whose temperatures of operation are high, technologies the solar heating at low temperatures and technologies for industrial heat process. [Spanish] Se suele distinguir dos tipos principales de sistemas de aprovechamiento de la energia solar: los fotovoltaicos y los fototermicos. Los primeros son aquellos basados en el efecto fotovoltaico, que permite la conversion directa de la energia de la radiacion solar en energia electrica. Los segundos transforman la energia solar en calor, el cual puede ser utilizado en una gran variedad de procesos. Por el grado de desarrollo de ambas tecnologias es conveniente presentarlas en secciones diferentes. Asi mismo, existe una gran variedad de tecnologias de sistemas fototermicos que hemos clasificado en tecnologias para la generacion termosolar de potencia electrica, cuyas temperaturas de operacion son altas, tecnologias para el calentamiento solar a bajas temperaturas y tecnologias para calor de proceso industrial.

Experimental study on fuel oil combustion in circulating fluidized bed; Estudio experimental sobre la combustion de combustoleo en lecho fluidizado circulante

Energy Technology Data Exchange (ETDEWEB)

Diaz Rangel, Ricardo [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1996-12-31

The Instituto de Investigaciones Electricas (IIE) developed a circulating fluidized bed combustor of 0.5 thermal MW unique in its type in Latin America. The Bachelor`s thesis entitled ``Experimental Study on Fuel Oil Combustion in Circulating Fluidized Bed`` was performed operating this combustor with the purpose of determining the feasibility of burning heavy fuel oil in a stable and sustained form, as well as the effect of the addition of calcium carbonate to the combustor. The results of the experimental trials showed heavy fuel oil can be burned in a circulating fluidized bed, with low sulfur dioxide emissions. During the conduction of the experiments a sulfur retention of 43% was achieved with a Ca/S relationship of 4.5. [Espanol] El Instituto de Investigaciones Electricas (IIE) desarrollo un combustor de lecho fluidizado circulante de 0.5 MW termicos de potencia, unico en su tipo en Latinoamerica. La tesis de licenciatura titulada Estudio Experimental sobre la Combustion de Combustoleo en Lecho Fluidizado Circulante se realizo operando dicho combustor, con el proposito de determinar la factibilidad de quemar combustoleo pesado en forma estable y autosostenida, asi como la influencia que tiene la adicion de carbonato de calcio al lecho. Los resultados de los ensayos experimentales mostraron que se puede quemar combustoleo pesado en un lecho fluidizado circulante, con bajas emisiones de bioxido de azufre. Durante la experimentacion se logro una retencion de azufre del 43%, con una relacion Ca/S de 4.5.

Experimental study on fuel oil combustion in circulating fluidized bed; Estudio experimental sobre la combustion de combustoleo en lecho fluidizado circulante

Energy Technology Data Exchange (ETDEWEB)

Diaz Rangel, Ricardo [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1997-12-31

The Instituto de Investigaciones Electricas (IIE) developed a circulating fluidized bed combustor of 0.5 thermal MW unique in its type in Latin America. The Bachelor`s thesis entitled ``Experimental Study on Fuel Oil Combustion in Circulating Fluidized Bed`` was performed operating this combustor with the purpose of determining the feasibility of burning heavy fuel oil in a stable and sustained form, as well as the effect of the addition of calcium carbonate to the combustor. The results of the experimental trials showed heavy fuel oil can be burned in a circulating fluidized bed, with low sulfur dioxide emissions. During the conduction of the experiments a sulfur retention of 43% was achieved with a Ca/S relationship of 4.5. [Espanol] El Instituto de Investigaciones Electricas (IIE) desarrollo un combustor de lecho fluidizado circulante de 0.5 MW termicos de potencia, unico en su tipo en Latinoamerica. La tesis de licenciatura titulada Estudio Experimental sobre la Combustion de Combustoleo en Lecho Fluidizado Circulante se realizo operando dicho combustor, con el proposito de determinar la factibilidad de quemar combustoleo pesado en forma estable y autosostenida, asi como la influencia que tiene la adicion de carbonato de calcio al lecho. Los resultados de los ensayos experimentales mostraron que se puede quemar combustoleo pesado en un lecho fluidizado circulante, con bajas emisiones de bioxido de azufre. Durante la experimentacion se logro una retencion de azufre del 43%, con una relacion Ca/S de 4.5.

Expansion plan of the electrical sector; Plan de expansion del sector electrico

Energy Technology Data Exchange (ETDEWEB)

Cristerna Ocampo, Rafael [Comision Federal de Electricidad (Mexico)

1996-07-01

An analysis of the Mexican electrical market in the year 1994 as far as sales of electrical energy and types of users who utilized that energy, is presented. In addition, an analysis is made of the options for the future supply, where the installed electrical capacity in Mexico in 1994 is described. Also the requirements of additional capacity of power generation, from year 1995 to year 2004 are analyzed. In the internal supply of primary energy in Mexico, the hydrocarbons represent 83%, the diversified sources (nuclear, geothermal, hydro and coal) represent 7% and the biomass as well as complementary coal, the 10% balance of the primary energy. Finally an expansion plan of the transmission network of the Mexican electrical system is described. [Spanish] Se presenta un analisis del mercado electrico mexicano en el ano de 1994 en cuanto a ventas de energia electrica y los tipos de usuarios que utilizaron esa energia. Se hace un analisis ademas, de las opciones para la oferta futura, donde se describe la capacidad electrica instalada de Mexico en 1994. Tambien se analizan los requerimientos de capacidad adicional de generacion de 1995 al 2004. En la oferta interna de energia primaria en Mexico, los hidrocarburos representan el 83%, las fuentes diversificadas (nuclear, geotermia, hidro y carboelectrica) representan el 7% y la biomasa asi como el carbon complementario, el 10% restante de la energia primaria. Finalmente se describe un plan de expansion de la red de transmision del sistema electrico mexicano.

Sinterização ultrarrápida por micro-ondas de compósitos particulados PZT/FCO preparados por mistura em ultrassom

Directory of Open Access Journals (Sweden)

C. P. Fernandez

Full Text Available Resumo Pós de Pb(Zr0,53Ti0,47O3 (PZT e Fe2CoO4 (FCO, foram sintetizados separadamente pelo método Pechini e misturados em ultrassom, nas proporções molares 80/20 e 50/50 (PZT/FCO. Os compósitos preparados foram prensados e submetidos à sinterização em forno convencional e sinterização ultrarrápida assistida por micro-ondas. A caracterização estrutural e microestrutural das amostras foram realizadas por difração de raios X e microscopia eletrônica de varredura, respectivamente. Medidas de constante dielétrica em função da temperatura, resistividade elétrica e coeficiente de acoplamento magnetoelétrico foram também realizadas. Os resultados evidenciaram que o método de mistura do PZT com a FCO por ultrassom foi rápido e eficiente, gerando, após sinterização, compósitos particulados com conectividade global (0-3 e distribuição uniforme de grãos da fase ferromagnética (FCO na matriz ferroelétrica (PZT. Da análise estrutural, verificou-se que a sinterização por micro-ondas propiciou um arranjo diferenciado no esquema de conectividade local na amostra (1-3 e (2-3, relacionada com a intensificação dos processos de difusão que ocorrem nesse tipo de sinterização principalmente em sistemas nanométricos. Pelos altos valores de resistividade obtidos, comprovou-se que a integridade das fases foi conservada nos dois métodos de sinterização, sendo mais eficiente na sinterização por micro-ondas, característica que garantiu o comportamento magnetoelétrico em todos os compósitos estudados neste trabalho. Os valores do campo Hmax foram dependentes da concentração da fase ferrita e da sinterização; para a composição 80/20 de 1,4 e 1,9 kOe, e para 50/50 de 3,5 e 3,0 kOe nas amostras sinterizadas por micro-ondas e convencionalmente, compatíveis com a literatura e que confirmaram a integridade das fases constituintes PZT e FCO.

Integral system for computer aided design of power line transmission towers; Sistema integral para el diseno asistido por computadora de torres de transmision

Energy Technology Data Exchange (ETDEWEB)

Nagore, Gabriel [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1987-12-31

The profitable use of the advantages offered by the computer aided design, through the integral system for the structural design of power transmission towers (SIDETT) will contribute to facilitate and improve the design of the structures that link the electric power generation centers with the consumers. [Espanol] El aprovechamiento de las ventajas que ofrece el diseno asistido por computadora, a traves del sistema integral para el diseno estructural de torres de transmision (SIDETT), contribuira a agilizar y mejorar el diseno de las estructuras que enlazan los centros de generacion de energia electrica con los consumidores.

Renewable energies in the national power supply; Energias renovables en la oferta energetica nacional

Energy Technology Data Exchange (ETDEWEB)

Huacuz Villamar, Jorge M [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

1999-07-01

Mexico is a country endowed with abundant power resources. By the magnitude of its reserves and the installed production capacity. This article presents the different nonconventional energy resources which Mexico has, with the purpose of using them for the generation of electric energy. [Spanish] Mexico es un pais dotado de abundantes recursos energeticos. Por la magnitud de sus reservas y por la capacidad instalada de produccion. Este articulo presenta los diferentes recursos energeticos no convencionales con los que cuenta Mexico, con el fin de utilizarlos para la generacion de energia electrica.

Participation of the research institutes in the safety aspects of the Laguna Verde nuclear power plant

International Nuclear Information System (INIS)

Sanchez G, J.

1991-01-01

The main activities undertaken by two research institutes of Mexico, the Instituto de Investigaciones Electricas and the Instituto Nacional de Investigaciones Nucleares, related to the safety of the Laguna Verde Nuclear Power Plant, are described. Among these activities, the development of a system for data acquisition and analysis during pre-operational tests, the design and construction of a full-scope simulator, the in-core fuel management and the establishment of an equipment qualification laboratory, stand out. It is considered that there exists a large potential for further participation. (author)

Surges in low voltage distribution networks: some of conducted studies; Surtos em redes de baixa tensao: alguns estudos realizados

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-04-01

This article presents an experience conducted by the Brazilian CELESC - Centrais Electricas de Santa Catarina, by installing two low voltage Si C lightning rods, one near of a batch of distribution transformers, and the other in the protection and measurement cabinet. That installation considered the high number of damages in transformers and meters in a region where 118 days of storm are detected. For the study, two regions presented similar climate characteristics and high number of damaged equipment. The low voltage lightning rods were installed only in one of the regions.

Integral system for computer aided design of power line transmission towers; Sistema integral para el diseno asistido por computadora de torres de transmision

Energy Technology Data Exchange (ETDEWEB)

Nagore, Gabriel [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1986-12-31

The profitable use of the advantages offered by the computer aided design, through the integral system for the structural design of power transmission towers (SIDETT) will contribute to facilitate and improve the design of the structures that link the electric power generation centers with the consumers. [Espanol] El aprovechamiento de las ventajas que ofrece el diseno asistido por computadora, a traves del sistema integral para el diseno estructural de torres de transmision (SIDETT), contribuira a agilizar y mejorar el diseno de las estructuras que enlazan los centros de generacion de energia electrica con los consumidores.

A 'new generation' earthquake catalogue

Directory of Open Access Journals (Sweden)

E. Boschi

2000-06-01

Full Text Available In 1995, we published the first release of the Catalogo dei Forti Terremoti in Italia, 461 a.C. - 1980, in Italian (Boschi et al., 1995. Two years later this was followed by a second release, again in Italian, that included more earthquakes, more accurate research and a longer time span (461 B.C. to 1990 (Boschi et al., 1997. Aware that the record of Italian historical seismicity is probably the most extensive of the whole world, and hence that our catalogue could be of interest for a wider interna-tional readership, Italian was clearly not the appropriate language to share this experience with colleagues from foreign countries. Three years after publication of the second release therefore, and after much additional research and fine tuning of methodologies and algorithms, I am proud to introduce this third release in English. All the tools and accessories have been translated along with the texts describing the development of the underlying research strategies and current contents. The English title is Catalogue of Strong Italian Earthquakes, 461 B.C. to 1997. This Preface briefly describes the scientific context within which the Catalogue of Strong Italian Earthquakes was conceived and progressively developed. The catalogue is perhaps the most impor-tant outcome of a well-established joint project between the Istituto Nazionale di Geofisica, the leading Italian institute for basic and applied research in seismology and solid earth geophysics, and SGA (Storia Geofisica Ambiente, a private firm specialising in the historical investigation and systematisation of natural phenomena. In her contribution "Method of investigation, typology and taxonomy of the basic data: navigating between seismic effects and historical contexts", Emanuela Guidoboni outlines the general framework of modern historical seismology, its complex relation with instrumental seismology on the one hand and historical research on the other. This presentation also highlights

Geological interpretation of Eastern Cuba Laterites from an airborne magnetic and radioactive isotope survey

Energy Technology Data Exchange (ETDEWEB)

Batista, J.A; Blanco, J [Departamento de Geologia, Instituto Superior Minero Metalurgico de Moa, (Cuba); Perez-Flores, M.A [Centro de Investigacion Cientifica y Educacion Superior de Ensenada, Baja California (Mexico)

2008-04-15

In eastern Cuba area several geophysical techniques have been applied to distinguish the main geological characteristics of the laterites which are of economical importance for the extraction of iron, nickel and chrome. The geophysical measurements include an aeromagnetic survey and thorium (eTh), potassium (K) and uranium (eU) isotope measurements. The results of gamma spectrometer measurements make a distinction between laterite reservoirs. The application of the magnetic and isotope methods allowed the determination of the distribution and development of the laterite crust, as well as the determination of hydrothermal alterations affecting the laterites, which is very useful for mining exploration and exploitation. Such alterations indicate the presence of silicates, which have negative effects on the metallurgic process. It is known that laterite crust has a high content of eU and eTh. [Spanish] Se han utilizado varias tecnicas geofisicas en la region oriental de Cuba para distinguir las principales caracteristicas geologicas de las lateritas, que poseen importancia economica para la extraccion de hierro, niquel y cobalto. Las mediciones geofisicas incluyen un estudio aeromagnetico y mediciones de isotopos de torio (eTh), potasio (K) y uranio (eU). Los resultados de las mediciones espectrometricas establecen diferencias entre los yacimientos de lateritas. De la aplicacion del metodo magnetico e isotopico se determino la distribucion y desarrollo de las cortezas lateriticas, asi como la ubicacion de alteraciones hidrotermales que afectan a las lateritas, lo cual es muy util durante la exploracion y explotacion minera. Esas alteraciones indican la presencia de silicatos, que tienen un efecto negativo en el proceso metalurgico. Se conoce que las cortezas lateriticas tienen altos contenidos de eU y eTh. De los contenidos de eU y eTh se infiere que las lateritas de la region de Moa se formaron antes que las de Mayari. De estas mediciones fue posible inferir el

OGS improvements in 2012 in running the North-eastern Italy Seismic Network: the Ferrara VBB borehole seismic station

Science.gov (United States)

Pesaresi, D.; Romanelli, M.; Barnaba, C.; Bragato, P. L.; Durì, G.

2014-07-01

The Centro di Ricerche Sismologiche (CRS, Seismological Research Centre) of the Istituto Nazionale di Oceanografia e di Geofisica Sperimentale (OGS, Italian National Institute for Oceanography and Experimental Geophysics) in Udine (Italy) after the strong earthquake of magnitude M=6.4 occurred in 1976 in the Italian Friuli-Venezia Giulia region, started to operate the North-eastern Italy Seismic Network: it currently consists of 17 very sensitive broad band and 18 simpler short period seismic stations, all telemetered to and acquired in real time at the OGS-CRS data centre in Udine. Real time data exchange agreements in place with other Italian, Slovenian, Austrian and Swiss seismological institutes lead to a total number of about 100 seismic stations acquired in real time, which makes the OGS the reference institute for seismic monitoring of North-eastern Italy. The south-western edge of the OGS seismic network (Fig. 1) stands on the Po alluvial basin: earthquake localization and characterization in this area is affected by the presence of soft alluvial deposits. OGS ha already experience in running a local seismic network in high noise conditions making use of borehole installations in the case of the micro-seismicity monitoring of a local gas storage site for a private company. Following the ML = 5.9 earthquake that struck the Emilia region around Ferrara in Northern Italy on 20 May 2012 at 02:03:53 UTC, a cooperation of Istituto Nazionale di Geofisica e Vulcanologia, OGS, the Comune di Ferrara and the University of Ferrara lead to the reinstallation of a previously existing very broad band (VBB) borehole seismic station in Ferrara. The aim of the OGS intervention was on one hand to extend its real time seismic monitoring capabilities toward South-West, including Ferrara and its surroundings, and on the other hand to evaluate the seismic response at the site. We will describe improvements in running the North-eastern Italy Seismic Network, including details of

OGS improvements in 2012 in running the Northeastern Italy Seismic Network: the Ferrara VBB borehole seismic station

Science.gov (United States)

Pesaresi, Damiano; Romanelli, Marco; Barnaba, Carla; Bragato, Pier Luigi; Durì, Giorgio

2013-04-01

The Centro di Ricerche Sismologiche (CRS, Seismological Research Center) of the Istituto Nazionale di Oceanografia e di Geofisica Sperimentale (OGS, Italian National Institute for Oceanography and Experimental Geophysics) in Udine (Italy) after the strong earthquake of magnitude M=6.4 occurred in 1976 in the Italian Friuli-Venezia Giulia region, started to operate the Northeastern Italy Seismic Network: it currently consists of 17 very sensitive broad band and 18 simpler short period seismic stations, all telemetered to and acquired in real time at the OGS-CRS data center in Udine. Real time data exchange agreements in place with other Italian, Slovenian, Austrian and Swiss seismological institutes lead to a total number of about 100 seismic stations acquired in real time, which makes the OGS the reference institute for seismic monitoring of Northeastern Italy. The southwestern edge of the OGS seismic network stands on the Po alluvial basin: earthquake localization and characterization in this area is affected by the presence of soft alluvial deposits. OGS ha already experience in running a local seismic network in high noise conditions making use of borehole installations in the case of the micro-seismicity monitoring of a local gas storage site for a private company. Following the ML=5.9 earthquake that struck the Emilia region around Ferrara in Northern Italy on May 20, 2012 at 02:03:53 UTC, a cooperation of Istituto Nazionale di Geofisica e Vulcanologia, OGS, the Comune di Ferrara and the University of Ferrara lead to the reinstallation of a previously existing very broad band (VBB) borehole seismic station in Ferrara. The aim of the OGS intervention was on one hand to extend its real time seismic monitoring capabilities toward South-West, including Ferrara and its surroundings, and on the other hand to evaluate the seismic response at the site. We will describe improvements in running the Northeastern Italy Seismic Network, including details of the Ferrara VBB

Using earthquakes to uncover the Earth's inner secrets: interactive exhibits for geophysical education

Directory of Open Access Journals (Sweden)

C. Nostro

2005-01-01

Full Text Available The Educational & Outreach Group (E&O Group of the Istituto Nazionale di Geofisica e Vulcanologia (INGV designed a portable museum to bring on the road educational activities focused on seismology, seismic hazard and Earth science. This project was developed for the first edition of the Science Festival organized in Genoa, Italy, in 2003. The museum has been mainly focused to school students of all ages and explains the main topics of geophysics through posters, movie and slide presentations, and exciting interactive experiments. This new INGV museum has been remarkably successful, being visited by more than 8000 children and adults during the 10 days of the Science Festival. It is now installed at the INGV headquarters in Rome and represents the main attraction during the visits of the schools all year round.

The evolution of the Luz y Fuerza del Centro substations. Volume 2; Evolucion de las subestaciones de Luz y Fuerza del Centro. Volumen 2

Energy Technology Data Exchange (ETDEWEB)

Carranza Ramirez, Sergio [Luz y Fuerza del Centro, Mexico, D. F. (Mexico)

1997-12-31

This document cites historical background of how the Luz y Fuerza del Centro substations have evolved up to nowadays. A brief description is made of one electric substation, the substation design criteria are mentioned, since it must comply with the requirements of reliability, service continuity, service quality, economy, geographical location, just for mentioning some of them. The more utilized arrangements of the Luz y Fuerza del Centro substations are described. In the same manner, the remote control substations are described mentioning the main elements of this type of substations. Mention is made also of the technological incorporations that have been made to the substations and the perspectives there are from these. One line diagrams of the electric substations are shown, as well as from power plant substations [Espanol] Este documento cita antecedentes historicos de como han evolucionando las subestaciones de Luz y Fuerza del Centro hasta hoy en dia. Se realiza una breve descripcion de una subestacion electrica, se mencionan los criterios de diseno de una subestacion, ya que debe cumplir con los requisitos de confiabilidad, continuidad, calidad del servicio, economia, situacion geografica, por mencionar algunos de estos. Se describen los arreglos de las subestaciones mas utilizados por Luz y Fuerza del Centro. De igual manera se describen las subestaciones telecontroladas mencionando los principales elementos de este tipo de subestaciones. Se mencionan las incorporaciones tecnologicas que se han realizado a las subestaciones y las perspectivas que se tienen de estas. Se muestran diagramas unifilares de subestaciones electricas, al igual que se muestran las plantas de las subestaciones

Intelligent system of aid for the starting of fossil fuel units; Sistema inteligente de ayuda para el arranque de unidades termoelectricas

Energy Technology Data Exchange (ETDEWEB)

Suarez Cerda, Dionisio A; Ibargueengoytia Gonzalez, Pablo H; Villavicencio Ramirez, Alejandro [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

1999-07-01

In this article the aid system for the starting of fossil fuel units is described (SIAAT) based on techniques of artificial intelligence, that the Management of Supervision of Processes of the Instituto de Investigaciones Electricas (IIE) develops. It analyzes the problem of the starting of fossil fuel units, which sets out to solve through computer techniques based on artificial intelligence. The system architecture is proposed and the challenges that are due to face are mentioned so that the system works in line with the process and along with it. In addition to the technical aspects covered in the project, the more relevant results that make an impact in the expectations of application of the system are mentioned, as well as the expected benefits of its use in fossil fuel power stations. [Spanish] En este articulo se describe el Sistema de ayuda para el Arranque de Unidades Termoelectricas (SIAAT) basado en tecnicas de inteligencia artificial, que desarrolla la Gerencia de Supervision de Procesos del Instituto de Investigaciones Electricas (IIE). Se analiza el problema del arranque de unidades termoelectricas, el cual se propone resolver a traves de tecnicas computacionales basadas en inteligencia artificial. Se presenta la arquitectura del sistema y se mencionan los retos que se deben enfrentar para que el sistema funcione en linea junto con el proceso. Ademas de los aspectos tecnicos abordados en el proyecto, se mencionan los resultados mas relevantes que impactan en las expectativas de aplicacion del sistema, asi como los beneficios esperados de su uso en centrales termoelectricas.

Results of the change of the lighting system in an institution of higher education; Resultados del cambio del sistema de iluminacion en una institucion de educacion superior

Energy Technology Data Exchange (ETDEWEB)

Torres P, Irene; Ambriz G, Juan Jose; Romero Paredes R, Hernando; Heras G, Francisco Javier [Universidad Autonoma Metropolitana. Iztapalapa (Mexico)

2003-07-01

In the Universidad Autonoma Metropolitana (UAM) actions have been made to diminish the energy consumption, one of them was the substitution and diminution of half of fluorescent lamps of 39W with ferromagnetic ballast for lamps of high electronic efficiency of 32W with electronic ballast. In this paper the results of the evaluation of the lighting level is presented after the indicated change, for which the measurement of the illumination level was made in the classrooms of 4 buildings of the UAM-1, as well as the calculation of the diminution of the electrical consumption for lighting taking into account previously measurements made of the consumption of electrical energy. The effect in the diminution of the electrical bill is significant, nevertheless, the lighting levels found are slightly insufficient. [Spanish] En la Universidad Autonoma Metropolitana se han realizado acciones enfocadas a disminuir el consumo de energia, una de ellas fue la sustitucion y disminucion a la mitad de lamparas fluorescentes de 39W con balastro ferromagnetico por lamparas de alta eficiencia de 32W con balastro electronico. En este trabajo se presentan los resultados de la evaluacion del nivel de iluminacion despues del cambio senalado, para lo cual se realizo la medicion del nivel de iluminacion en los salones de clase de 4 edificios de la UAM-I, asi como el calculo en la disminucion en el consumo electrico por iluminacion tomando en cuenta mediciones de consumo de energia electrica realizadas anteriormente. El efecto en la disminucion de la facturacion electrica es apreciable, sin embargo, los niveles de iluminacion encontrados son ligeramente insuficientes.

PRODUCCIÓN Y CARACTERIZACIÓN DEL NUEVO SISTEMA SUPERCONDUCTOR Yb0,5Ho0,5Ba2Cu3O7-d

Directory of Open Access Journals (Sweden)

Jully P. Peña

2011-01-01

Full Text Available Se reporta la caracterización del nuevo sistema superconductor Yb0,5Ho0,5Ba2Cu3O7-δ perteneciente a la familia de cupratos de alta temperatura TR123; el material fue producido utilizando el método de reacción de estado sólido (SSR con una temperatura de sinterizado de 910 °C. Se muestra la caracterización morfológica referente al comportamiento granular utilizando la técnica de Microscopía electrónica de barrido (SEM; la caracterización estructural, se logra sometiendo la muestra a difracción de rayos X (DRX y se obtienen los parámetros estructurales implementando el método de refinamiento Rietveld en el software GSAS, el material resulta poseer celdas unitarias ortorrómbicas tipo perovskita con un comportamiento superconductor que se evidencia en la curva de resistividad como función de la temperatura cuya derivada presenta un punto crítico en el valor correspondiente a la temperatura crítica Tc 92,61 K.

SÍNTESIS DE ÓXIDOS CONDUCTORES TRANSPARENTES DE ÓXIDO DE ZINC DOPADO CON ALUMINIO POR COPRECIPITACIÓN QUÍMICA

Directory of Open Access Journals (Sweden)

Silvia Maioco

2013-01-01

Full Text Available Los óxidos de zinc dopados con Al (AZO son promisorios reemplazantes de los óxidos de indio dopados con Sn (ITO pero sus películas delgadas muestran un amplio rango de propiedades fuertemente dependientes de las condiciones del proceso de deposición. Se examinan cerámicos de granulometría submicrométrica de óxido de zinc dopado con 1% de aluminio, preparados por coprecipitación en solución acuosa, a partir de Zn(NO32 y Al(NO33, sinterizados a 1200°C y subsecuentemente templados en atmósfera controlada de 10-16 atm de oxígeno, a 1000°C. La resistividad eléctrica disminuye en dos órdenes de magnitud en las primeras dos horas de templado y el coeficiente Seebeck cambia de -140 a -50 μV/K gradualmente en 8 h. Se concluye que el aumento de la movilidad domina sobre el de densidad de portadores, inducido por cambios de la estequiometria metal oxígeno.

Preliminary experiments with a solid-state ionization chamber; Experiences preliminaires au moyen d'une chambre d'ionisation a milieu solide; Predvaritel'nye opyty s tverdoj ionizatsionnoj kameroj; Experimentos preliminares con una camara de ionizacion en estado solido

Energy Technology Data Exchange (ETDEWEB)

Griffiths, R J; Batty, C J [National Institute for Research and Nuclear Science, Harwell (United Kingdom); Gibbons, P E; Northrop, D C [Service' s Electronics Research Laboratory, Baldock, Didcot (United Kingdom)

1962-04-15

A solid-state ionization chamber has been made by diffusing phosphorus into high-resistivity silicon to form ohmic contacts. Such a detector has been successfully used to detect 30-MeV protons. Preliminary results are given and discussed. (author) [French] Une chambre d'ionisation a milieu solide a ete realisee par diffusion de phosphore dans du silicium de haute resistivite pour former des contacts ohmiques. Un detecteur de cette nature a ete utilise avec succes pour detecter des protons de 30 MeV. Les auteurs presentent les resultats preliminaires obtenus. (author) [Spanish] Se ha construido una camara de ionizacion en estado solido, por difusion de fosforo en silicio de elevada resistividad para formar contactos ohmicos. Con esta camara se han logrado detectar protones de 30 MeV. Los autores presentan y examinan los resultados preliminares obtenidos. (author) [Russian] Tverdaya ionizatsionnaya kamera izgotovlena putem vklyucheniya fosfora v kremnij s vysokoj udel'noj soprotivlyaemost'yu dlya obrazovaniya omicheskikh kontaktov. Takoj detektor uspeshno primenyaetsya dlya obnaruzheniya protonov v 30 mehv. Predstavleny i obsuzhdayutsya predvaritel'nye rezul'taty. (author)

Producción de tres videos documentales : sobre el proyecto EmoLab

OpenAIRE

Vera Rivera, Rosa Elizabeth

2017-01-01

El documento presenta la elaboración de un documental sobre los procesos investigativos que realiza el proyecto de movilidad verde EmoLab: Eléctric Movility Lab (Laboratorio de Movilidad Electrica) el mismo que también se podrá observar la elaboración de guiones técnicos y literarios previos a los viajes en el que se estableció rutas específicas para la obtención de datos y la autonomía del vehículo eléctrico. The document presents the elaboration of a documentary about the investigative p...

Electrocardiografo por computadora

OpenAIRE

Tinoco Hernandez, Rosanna; Paredes Bejarano, Margarita; Romero Chaglia, Norman; Yapur Auad, Miguel Eduardo

2009-01-01

El presente trabajo trata sobrees el diseño y la implementación de un graficador de señales cardiacas por computadora, para lo cual diseñamos un circuito electrónico capaz de recibir la senal analógica proveniente de la actividad electrica del corazón , amplificarla, y luego convertirla en una señal digital para ser procesada por software y finalmente ser graficada, siendo posible así observar la señal cardiaca en el monitor de un computador como un tren de pulsos. Cabe destacar que par...

The Spanish energetic mix; prevision and historic evolution of the electric production structure

International Nuclear Information System (INIS)

Revuelta, J.; Lopez Sanz, R.

2010-01-01

This article describes the past and forecasted evolution of the electric production of the Spanish system (excluding the Spanish isolated systems), according to the records of the System Operator, Red Electrica de Espana, and the studies of its Network Planning department. The behaviour of the demand is analysed, as well as the evolution of the generation mix. The article expose the main recent changes the sector has undergone and points out the main future challenge it will face regarding the forecasted evolution of the demand, the integration of renewable energy sources, and the energy objectives established at European and national level. (Author)

Lithium-ion batteries

CERN Document Server

Yoshio, Masaki; Kozawa, Akiya

2010-01-01

This book is a compilation of up-to-date information relative to Li-Ion technology. It provides the reader with a single source covering all important aspects of Li-Ion battery operations. It fills the gap between the old original Li-Ion technology and present state of the technology that has developed into a high state of practice. The book is designed to provide a single source for an up-to-date description of the technology associated with the Li-Ion battery industry. It will be useful to researchers interested in energy conversion for the direct conversion of chemical energy into electrica

Energy integration experiences at the Europe, at the Nordic countries and at the Central America: considerations relevant to the South America integration process; Experiencias de integracao energetica na Europa, nos paises nordicos e na America Central: consideracoes relevantes ao processo de integracao Sul-Americana

Energy Technology Data Exchange (ETDEWEB)

Campos, Adriana Fiorotti; Andreza, Fernanda Marques Pereira; Soares, Jeferson Borghetti; Pinheiro, Maria Fernanda Bacile; Oliveira, Ricardo Gorini de [Empresa de Pesquisa Energetica (EPE), Rio de Janeiro, RJ (Brazil)], Emails: adriana.campos@epe.gov.br, fernanda.andreza@epe.gov.br; jeferson.soares@epe.gov.br, maria.pinheiro, ricardo.gorini@epe.gov.br

2010-07-01

In view of institutional/contractual regulatory problems at the South America, some experiences of energy integration at the electrical sectors and natural gas (Nordic countries. European Union and Central America), identifying related vantages and advantageous. Besides, there is an attempt of characterization of the process step of energy integration, and the fitting of regions in these steps, observing that the process of energy integration in the South America it is found in a initial step yet if it is considered the used methodology by the Colombian enterprise Interconexion Electrica S.A.E.S.P. - ISA (2007)

10. international conference on innovation and technological development; 10. congreso internacional sobre innovacion y desarrollo tecnologico (CIINDET 2013)

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-03-15

The conference held in the city of Cuernavaca, Morelos, Mexico, from March 13 to 15, 2013 presented several papers related to the areas of mechanical engineering, electrical engineering, control systems, computer systems, electronics and instrumentation and alternate energies, with a focus on innovation and technology development [Spanish] En este congreso celebrado en la ciudad de Cuernavaca, Morelos, Mexico, del 13 al 15 de marzo de 2013, se presentan diversas ponencias relacionadas con las areas de ingenieria mecanica, ingenieria electrica, sistemas de control, sistemas computacionales, electronica e instrumentacion y energias alternas, con un enfoque hacia la innovacion y el desarrollo tecnologico.

8. international conference on innovation and technological development; 8. congreso internacional sobre innovacion y desarrollo tecnologico (CIINDET 2010)

Energy Technology Data Exchange (ETDEWEB)

NONE

2010-11-15

In this conference in the city of Cuernavaca, Morelos, Mexico, from 24 to 26 November 2010, there are several papers related to the areas of mechanical engineering, electrical engineering, control systems, computer systems, electronics and instrumentation and energies alternating with a focus on innovation and technological development. [Spanish] En este congreso celebrado en la ciudad de Cuernavaca, Morelos, Mexico, del 24 al 26 de noviembre de 2010, se presentan diversas ponencias relacionadas con las areas de ingenieria mecanica, ingenieria electrica, sistemas de control, sistemas computacionales, electronica e instrumentacion y energias alternas con un enfoque hacia la innovacion y el desarrollo tecnologico.

System programs design of motors; Sistema de programas de diseno de motores

Energy Technology Data Exchange (ETDEWEB)

Diaz Gonzalez Palomas, Oscar; Ciprian Avila, Fernando [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1988-12-31

This paper describes the objective of creating the program system for induction motors design SIPRODIMO, its scope, its general characteristics, its structure and the results obtained with its application, as well as the service capacity developed by the Motors Area of the Instituto de Investigaciones Elctricas. [Espanol] En este articulo se describe el objetivo de crear el sistema de programas de diseno de motores de induccion, Siprodimo, su alcance, sus caracteristicas generales, su estructura y los resultados obtenidos con su aplicacion, asi como la capacidad de servicio desarrollada por el area de motores, del Instituto de Investigaciones Electricas.

Sistema de presupuesto de materiales y mano de obra electrica sipreme

OpenAIRE

Briones Ruiz, Freddy Roddy; Murgueitio Chuchuca, Glenda Desiree; Freire Cobo, Lenin Eduardo

2009-01-01

La forma más eficiente de llevar la información de las empresas es por medio de la automatización ya que debido a esto se pueda llevar un control de materiales presupuestado con los comprados y a la vez los entregados; de esa forma se pudiese dar por finalizado una obra de instalaciones eléctricas. El objetivo de nuestro sistema es que resuelva de manera eficiente, rápida y de forma fácil los diferentes requerimientos de todos aquellos profesionales de Ingeniería Eléctrica y Telefónica...

Feasibility of implementation of an autonomous hybrid system for PEM fuel cells to electrify localities in rural Cuba; Factibilidad de implementacion de un sistema hibrido autonomo con celda de combustible PEM para electrificar localidades rurales en Cuba

Energy Technology Data Exchange (ETDEWEB)

Sanchez Torres, Yamir [Centro de Estudios de Tecnologias Energeticas Renovables (CETER), Ciudad de la Habana (Cuba)] e-mail: yamir@ceter.cujae.edu.cu

2009-09-15

The use of PEM fuel cells to produce electric energy in autonomous systems is closely linked with the production and storage of hydrogen. Eventually joined with sources of renewable energy, this creates an ecologically clean and sustainable system. In several developing countries, localities exist that do not have electricity but have significant unexploited renewable energy power, where an autonomous hybrid system can be designed to electrify these population centers. This work presents a hybrid electricity scheme with a PEM fuel cell to produce hydrogen and electricity in order to electrify rural zones far from the national power grid in Cuba. The electric demand of the zone and available energy power was calculated using the informatics modeling and simulation programs HOMER, PVSYST and Matlab 1,2,3. Variability in wind and photovoltage power was determined based on daylight hours and seasonal periods throughout the year as well as their effect on the production of hydrogen and electricity. It was shown that the energy demand is met even for the most adverse scenarios. This work offers a detailed description of the behavior of the system and evidence of no effect on the environment, enabling the electrification and wellbeing of residents of the locality. [Spanish] El uso de celdas de combustible PEM para la produccion de energia electrica en sistemas autonomos esta estrechamente ligado a la produccion y almacenamiento de hidrogeno. Esto eventualmente unido a las fuentes renovables de energia forma un sistema ecologicamente limpio y sustentable. En varios paises subdesarrollados existen localidades que no cuentan con electricidad y que tienen importantes potenciales energeticos renovables no explotados actualmente en los cuales se puede disenar un sistema hibrido autonomo para electrificar estas poblaciones. En este trabajo se presenta el esquema de un sistema hibrido autonomo con celda de combustible PEM, para la produccion de hidrogeno y electricidad encaminado

Application of scale test modules for model the electrothermal performance in buildings for the efficient use of energy; Aplicacion de modulos de prueba a escala para modelar el funcionamiento electrotermico de edificios para el uso eficiente de la energia

Energy Technology Data Exchange (ETDEWEB)

Acoltzi Acoltzi, Higinio

2000-10-01

and small vault pottery with glass sun reflector (34% in the experimental model and 37% in the theoretical model). [Spanish] La investigacion para acondicionamiento de espacios por enfriamiento en edificios de tamano real tiene un costo elevado por la cantidad de materiales y la variedad de parametros que intervienen. Por lo anterior, en este trabajo se utilizan modulos de prueba a escala acoplados a sistemas de aire acondicionado para obtener su respuesta electrotermica; es decir, cuantificar la cantidad de energia electrica que consumira un modulo en funcion de los materiales de prueba. Se analiza un modelo termico teorico transitorio y las pruebas experimentales del comportamiento termico de modulos de prueba a escala por la variacion de los materiales de los techos y ventanas, desarrollado con el objeto de establecer criterios de aplicacion de dichos materiales en las industrias de la edificacion. Adicionalmente se presenta el desarrollo de un modelo electrotermico teorico en estado permanente, que define el comportamiento del consumo de energia electrica, para mantener las condiciones de confort al interior de los modulos de prueba respecto a la variacion de los materiales mencionados. Se presenta tambien el diseno y el desarrollo de las pruebas experimentales utilizando los modulos de prueba a escala para validar el modelo electrotermico. La experimentacion se desarrolla exponiendo los modulos de prueba a escala, acoplados a los equipos de aire acondicionado, a la radiacion solar directa, registrando el consumo de energia electrica de los equipos de aire acondicionado, la radiacion solar sobre techo y ventanas de prueba, la temperatura interior de los modulos, la temperatura interior y exterior en la superficie de los techos de prueba, la temperatura ambiente, y la velocidad del viento. Los resultados obtenidos comparando las mediciones en campo y el modelo electrotermico teorico desarrollado, presentan diferencias promedio de 16%. Los ahorros de energia

Electrofiltration of fly ashes extremely strong and special characteristics; Electrofiltracion de Cenizas de Alta Resistividad y Caracteristicas Especiales

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-07-01

The main objective of CARE project was to improve the utilization of electrostatic precipitator technology for control of particle emission to the atmosphere, specially from coal-fired power stations burning coal with fly ash characteristics exhibiting extremely strong particle cohesion. (Author)

Doping and synthesis method effect on zirconium silicate conductivity

Directory of Open Access Journals (Sweden)

Monrós, G.

2006-06-01

Full Text Available The colour mechanisms of blue V- ZrSiO4 and yellow Pr- ZrSiO4 ceramic pigments which strongly depend on both fluorine addition and synthesis method, are still controversial. Complex impedance has been used as a useful tool to differentiate the materials as a function of the synthesis method, microstructure and observed colour, going deeply into the resolution of controversies about the nature of colours. Representative samples of these doping pigmenting systems prepared by both classical ceramic process and sol-gel method have been studied by complex impedance analysis. Vanadium doped zircon enhances resistivity and activation energy compared to undoped zircon powder and turkish blue vanadium-zircon obtained by addition of NaF shows the highest bulk resistivity. Activation energy and conductivity decrease for Praseodymium doped zircon compared to undoped zircon. This feature is in agreement with the presence of cationic vacancies on green vanadiumzircon samples due to V4+ and V5+ coexistence and praseodymium oxide inclusions on Pr- ZrSiO4 yellow pigment.

El mecanismo del color en el azul de los pigmentos cerámicos V- ZrSiO4 y amarillo de Pr- ZrSiO4 cuyos tinos dependen mucho de la presencia de fluoruros así como del método de preparación esta controvertido en la literatura. La impedancia compleja se ha utilizado como una herramienta útil para diferenciar los materiales en función del método de síntesis, la microestructura y el color con el fin de profundizar en la resolución de las controversias. Se han preparado muestras representativas de ambos sistemas dopados mediante diferentes métodos de síntesis cerámico y sol-gel que se han estudiado por análisis de impedancia compleja. El circón dopado con vanadio aumenta su resistividad y sus energía de activación con referencia a la muestra no dopada y la muestra turquesa obtenida por adición de NaF presenta la mayor resistividad. Las muestras dopadas con praseodimio disminuyen

Simulation of the flow phenomena in geothermal wells: developments and applications; Simulacion de los fenomenos de flujo en pozos geotermicos: desarrollos y aplicaciones

Energy Technology Data Exchange (ETDEWEB)

Garcia Gutierrez, Alfonso [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1994-07-01

In this paper the numerical simulators and the specialized computer programs that have been developed in the Departamento de Geotermia of the Instituto de Investigaciones Electricas (IIE) for the study of mass transport phenomena, momentum and heat in geothermal wells, are delineated. The developments can be assembled in 5 types: a) Fluid circulation during geothermal well construction; b) Production; c) Construction; d) Return to the thermal equilibrium; e) Thermodynamic and fluid transport properties, cements, and rocks. The applications realized include, besides the normal flow phenomena that occur in geothermal wells, the study of special problems that have been found in several wells of the geothermal fields in the country. These developments constitute a tool of great utility for the reservoir engineer`s daily work and for the understanding of the specific phenomena of infrequent occurrence. [Espanol] En este trabajo se describen los simuladores numericos y programas de computo especializados que se han desarrollado en el Departamento de Geotermia del Instituto de Investigaciones Electricas (IIE), para estudiar los fenomenos de transporte de masa, momentum y calor en pozos geotermicos. Los desarrollos pueden agruparse en 5 tipos: a) circulacion de fluidos durante la construccion de pozos, b) produccion, c) inyeccion, d) retorno a equilibrio termico, e) propiedades termodinamicas y de transporte de los fluidos, cementos y rocas. Las aplicaciones realizadas incluyen, ademas de los fenomenos normales de flujo que ocurren en pozos geotermicos, el estudio de problemas especiales que se han encontrado en diversos pozos de los campos geotermicos del pais. Estos desarrollos constituyen una herramienta de gran utilidad para el trabajo diario del ingeniero de yacimientos y para el entendimiento de fenomenos especificos de ocurrencia poco frecuente.

Artificial intelligence tools to support the analysis of the high tension insulator flaming; Herramientas de inteligencia artificial de apoyo al analisis de flameos en aisladores de alta tension

Energy Technology Data Exchange (ETDEWEB)

Rodriguez Ortiz, Guillermo; Mejia Lavalle, Manuel; Montoya Tena, Gerardo [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1996-12-31

Four artificial intelligence tools developed at the Instituto de Investigaciones Electricas (IIE) to support the analysis of high tension insulator flaming are described. The first tool builds up a decision tree departing from historical data, the other 3 tools operate departing from the decision tree previously created to generate production rules, function as an expert system and make tests with many already known cases. These tools could predict the impending occurrence of flaming with enough time allowance for the insulators to be cleaned, since the traditional practice is the periodical cleaning of the insulators and this is not always adequate since the cleaning teams are limited, and the action of the environment is not always constant and for that reason insulators that do not need it are cleaned and vice-versa [Espanol] Se describen 4 herramientas de inteligencia artificial desarrolladas en el Instituto de Investigaciones Electricas (IIE) para apoyar al analisis de flameos en aisladores de alta tension. La primera herramienta construye el arbol de decision a partir de datos historicos; las otras 3 herramientas operan a partir del arbol de decision previamente creado para generar reglas de produccion, funcionar a la manera de un sistema experto y hacer pruebas con muchos casos conocidos. Estas herramientas podrian predecir la ocurrencia inminente del flameo con tiempo suficiente para que los aisladores se limpien, ya que la forma tradicional es limpiar periodicamente los aisladores y esto a veces no es adecuado debido a que las cuadrillas de limpieza son limitadas, ademas de que la accion del medio ambiente no es constante y es por eso que a veces se limpian aisladores que no lo necesitan o viceversa

Artificial intelligence tools to support the analysis of the high tension insulator flaming; Herramientas de inteligencia artificial de apoyo al analisis de flameos en aisladores de alta tension

Energy Technology Data Exchange (ETDEWEB)

Rodriguez Ortiz, Guillermo; Mejia Lavalle, Manuel; Montoya Tena, Gerardo [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1997-12-31

Four artificial intelligence tools developed at the Instituto de Investigaciones Electricas (IIE) to support the analysis of high tension insulator flaming are described. The first tool builds up a decision tree departing from historical data, the other 3 tools operate departing from the decision tree previously created to generate production rules, function as an expert system and make tests with many already known cases. These tools could predict the impending occurrence of flaming with enough time allowance for the insulators to be cleaned, since the traditional practice is the periodical cleaning of the insulators and this is not always adequate since the cleaning teams are limited, and the action of the environment is not always constant and for that reason insulators that do not need it are cleaned and vice-versa [Espanol] Se describen 4 herramientas de inteligencia artificial desarrolladas en el Instituto de Investigaciones Electricas (IIE) para apoyar al analisis de flameos en aisladores de alta tension. La primera herramienta construye el arbol de decision a partir de datos historicos; las otras 3 herramientas operan a partir del arbol de decision previamente creado para generar reglas de produccion, funcionar a la manera de un sistema experto y hacer pruebas con muchos casos conocidos. Estas herramientas podrian predecir la ocurrencia inminente del flameo con tiempo suficiente para que los aisladores se limpien, ya que la forma tradicional es limpiar periodicamente los aisladores y esto a veces no es adecuado debido a que las cuadrillas de limpieza son limitadas, ademas de que la accion del medio ambiente no es constante y es por eso que a veces se limpian aisladores que no lo necesitan o viceversa

The distribution systems of the Luz y Fuerza del Centro; Sistemas de distribucion en Luz y Fuerza del Centro

Energy Technology Data Exchange (ETDEWEB)

Espinosa y Lara, Roberto [Luz y Fuerza del Centro, Mexico, D. F. (Mexico)

1997-12-31

In this document are described the distribution systems that have been utilized in Mexico, to satisfy the electric energy demand. Mention is made of the areas of influence these systems have, its structure, the electric infrastructure that Luz y Fuerza del Centro has to satisfy the demand and in this way be in position of planning the distribution networks. As in other activities the aspects related to the protection of the environment exert a growing influence on the development of the energy sector, for this reason three themes are mentioned to which special attention must be paid. A table is shown with the per capita consumption, another one with the number of transformers and its capacity. Also the underground networks in operation and under construction are shown and a flow diagram of the distribution system planning [Espanol] En este documento se describen los sistemas de distribucion que se han realizado en Mexico, para satisfacer la demanda electrica, se mencionan las areas de influencia que tienen estos sistemas, su estructuracion, la infraestructura electrica con la que cuenta Luz y Fuerza del Centro para satisfacer las demandas y asi poder planear las redes de distribucion. Como en otras actividades, los aspectos relacionados con el cuidado del ambiente ejercen una influencia creciente sobre el desenvolvimiento del sector de energia, es por eso que se mencionan tres temas a los que se les debe de poner especial atencion. Se muestra una tabla de consumo per capita, otra del numero de transformadores y su capacidad. Tambien se ilustran las redes subterraneas en operacion y construccion y un flujograma de planeacion del sistema de distribucion

Methodology for the electric energy distribution systems planning of small and rural zones of Comision Federal de Electricidad; Metodologia para la planeacion de sistemas de distribucion de energia electrica de zonas pequenas y rurales de Comision Federal de Electricidad

Energy Technology Data Exchange (ETDEWEB)

Ochoa Gomez, Miguel Armando

2008-12-15

institutional procedures, the standards, the commercial programs and the programs developed by the Management of Planning, used in the CFE to make the electric distribution systems planning. In the same way, in Chapter 4 a methodology for the optimization of the electrical grids in low tension is proposed, standing out some errors that are commonly committed in the design of these types of networks, doing recommendations to correct them with low cost investments. Because of the importance in the design of medium tension lines, in Chapter 3 the set of economic conductors for 23 kV was determined for urban and rural areas, system type A (3F-4H, 2F-3H, 1F-2H), by means of the Modified Method. With this information we will be able to select the conductor that offers the best economy in the time, in each extension of the network. In Chapter 5 the proposed methodology in the planning of the electrical system of distribution of the Zapotlan Zone was applied, as much in substations as in the high and medium tension network. In this chapter analyses of optimization of the network were performed, capacitor banks application, attention to the incremental demand, power losses, contingencies by fault and reliability of the provision. Finally the obtained conclusions of the investigation and the work carried out are presented; as well as the recommendations for future facilities. [Spanish] Las 13 Divisiones de Distribucion en las cuales la Comision Federal de Electricidad (CFE) tiene estructurada, administrativa y tecnicamente, la distribucion de la energia electrica en su territorio atendido, estan constituida a su vez por un total de 120 Zonas de Distribucion, clasificadas conforme al producto de su numero de clientes, por su volumen de ventas anuales, en media y baja tension, como zonas tipo I, II y III. Ejemplos de zonas tipo III son las Zona Guadalajara y la Zona Metropolitana Monterrey Norte, Oriente y Poniente (metropolis), la tipo II son zonas predominantemente urbanas como Queretaro

Economic and environmental benefits of interconnected systems. The Spanish example

International Nuclear Information System (INIS)

Chicharro, A.S.; Dios Alija, R. de

1996-01-01

The interconnected systems provide large technical and economic benefits which, evaluated and contrasted with the associated network investment cost, usually produce important net savings. There are continental electrical systems formed by many interconnected subsystems. The optimal size of an interconnection should be defined within an economic background. It is necessary to take into account the global environmental effects. The approach and results of studies carried out by Red Electrica is presented, in order to analyse both economic and environmental benefits resulting from an increase in the present Spanish interconnection capacities. From both economic and environmental points of view, the development of the interconnected systems is highly positive. (author)

Use energy and some topic about alternate energy sources Riobamba municipality Ecuador

International Nuclear Information System (INIS)

Recaldel, C.; Echeverria, M. J.; Munnos, A.; Haro, I.; Escudero, Patricio Londo; Cabezas, Luis

2009-01-01

Full text: The hydraulic energy finds to predict the potential. The development of other prediction methods like the theory of the chaos, incentivate to carry out comparisons with models of excellent trajectory such as ARIMA de BOX- Jenkins. The hydraulic energy potential of Rio Blanco Quimiag -Riobamba- Ecuador has been modeled in order to predict the flows in L/s starting from the registrations stored in the station 2 of the Empresa Electrica Riobamba SA. The pattern ARIMA (SPSS 11) was applied and the theory of the chaos (TISEAN 2.1). The precision of the prediction was determined by the analysis of residuals or errors, correlation and test of Tukey. (author)

A new model for commercially sustainable renewable energy-based rural electrification in Indonesia

Energy Technology Data Exchange (ETDEWEB)

Walt, Robb [Integrated Power Corporation-Indonesia, (United states)

1995-12-31

] Las rapidas crecientes demandas y los requerimientos de acceso a la electricidad por todas las areas remotas de Indonesia juntamente con los subsidios de mas de $500 millones de dolares para la electrificacion rural han forzado al gobierno de Indonesia a buscar alternativas al modelo convencional de empresa de servicios electricos para la electrificacion rural. En 1992-1993 se llevo a cabo un estudio en colaboracion con la Agencia para la Aplicacion y la Evaluacion de Tecnologia (BPPT)del Gobierno de Indonesia y la Empresa Nacional de Energia Electrica (PLN) para apoyar la busqueda de soluciones sustentables para la electrificacion de comunidades remotas. Este estudio produjo un Nuevo Modelo comercial para la electrificacion de comunidades rurales fuera de la red en Indonesia con servicios de la calidad de empresa electrica. Este nuevo modelo esta caracterizado por el uso de nuevas tecnologias para la generacion, distribucion y ventas de electricidad. La clave del exito del nuevo modelo son las plantas electricas hibridas basadas en energia renovable y en el uso de medidores flexibles suministradores de energia bajo demanda. Las tarifas estimadas para el servicio de electricidad estan basadas en las cantidades que actualmente se pagan por los propietarios de casas rurales por keroseno, velas y servicios de baterias a diferentes niveles de ingreso. El estudio mostro que la mayor parte de los propietarios de casa estan deseosos y tienen la capacidad para pagar cantidades adicionales por valiosos servicios confiables de electricidad del grado de empresa de servicios electricos, tales como mejor alumbrado, entretenimiento de television y para usos productivos (economicos) durante las horas diurnas. Se llevo a cabo una evaluacion financiera en sistemas hibridos de energia electrica en comunidades fuera de la red con ganancias generadas en base a las tarifas del mercado y cobradas mediante nueva tecnologia para la compra de electricidad y pago anticipado en base a un

A new model for commercially sustainable renewable energy-based rural electrification in Indonesia

Energy Technology Data Exchange (ETDEWEB)

Walt, Robb [Integrated Power Corporation-Indonesia, (United states)

1996-12-31

] Las rapidas crecientes demandas y los requerimientos de acceso a la electricidad por todas las areas remotas de Indonesia juntamente con los subsidios de mas de $500 millones de dolares para la electrificacion rural han forzado al gobierno de Indonesia a buscar alternativas al modelo convencional de empresa de servicios electricos para la electrificacion rural. En 1992-1993 se llevo a cabo un estudio en colaboracion con la Agencia para la Aplicacion y la Evaluacion de Tecnologia (BPPT)del Gobierno de Indonesia y la Empresa Nacional de Energia Electrica (PLN) para apoyar la busqueda de soluciones sustentables para la electrificacion de comunidades remotas. Este estudio produjo un Nuevo Modelo comercial para la electrificacion de comunidades rurales fuera de la red en Indonesia con servicios de la calidad de empresa electrica. Este nuevo modelo esta caracterizado por el uso de nuevas tecnologias para la generacion, distribucion y ventas de electricidad. La clave del exito del nuevo modelo son las plantas electricas hibridas basadas en energia renovable y en el uso de medidores flexibles suministradores de energia bajo demanda. Las tarifas estimadas para el servicio de electricidad estan basadas en las cantidades que actualmente se pagan por los propietarios de casas rurales por keroseno, velas y servicios de baterias a diferentes niveles de ingreso. El estudio mostro que la mayor parte de los propietarios de casa estan deseosos y tienen la capacidad para pagar cantidades adicionales por valiosos servicios confiables de electricidad del grado de empresa de servicios electricos, tales como mejor alumbrado, entretenimiento de television y para usos productivos (economicos) durante las horas diurnas. Se llevo a cabo una evaluacion financiera en sistemas hibridos de energia electrica en comunidades fuera de la red con ganancias generadas en base a las tarifas del mercado y cobradas mediante nueva tecnologia para la compra de electricidad y pago anticipado en base a un

Global positioning system survey data for active seismic and volcanic areas of eastern Sicily, 1994 to 2013

Science.gov (United States)

Bonforte, Alessandro; Fagone, Sonia; Giardina, Carmelo; Genovese, Simone; Aiesi, Gianpiero; Calvagna, Francesco; Cantarero, Massimo; Consoli, Orazio; Consoli, Salvatore; Guglielmino, Francesco; Puglisi, Biagio; Puglisi, Giuseppe; Saraceno, Benedetto

2016-08-01

This work presents and describes a 20-year long database of GPS data collected by geodetic surveys over the seismically and volcanically active eastern Sicily, for a total of more than 6300 measurements. Raw data were initially collected from the various archives at the Istituto Nazionale di Geofisica e Vulcanologia, Sezione di Catania—Osservatorio Etneo and organized in a single repository. Here, quality and completeness checks were performed, while all necessary supplementary information were searched, collected, validated and organized together with the relevant data. Once all data and information collections were completed, raw binary data were converted into the universal ASCII RINEX format; all data are provided in this format with the necessary information for precise processing. In order to make the data archive readily consultable, we developed software allowing the user to easily search and obtain the needed data by simple alphanumeric and geographic queries.

Global positioning system survey data for active seismic and volcanic areas of eastern Sicily, 1994 to 2013.

Science.gov (United States)

Bonforte, Alessandro; Fagone, Sonia; Giardina, Carmelo; Genovese, Simone; Aiesi, Gianpiero; Calvagna, Francesco; Cantarero, Massimo; Consoli, Orazio; Consoli, Salvatore; Guglielmino, Francesco; Puglisi, Biagio; Puglisi, Giuseppe; Saraceno, Benedetto

2016-08-01

This work presents and describes a 20-year long database of GPS data collected by geodetic surveys over the seismically and volcanically active eastern Sicily, for a total of more than 6300 measurements. Raw data were initially collected from the various archives at the Istituto Nazionale di Geofisica e Vulcanologia, Sezione di Catania-Osservatorio Etneo and organized in a single repository. Here, quality and completeness checks were performed, while all necessary supplementary information were searched, collected, validated and organized together with the relevant data. Once all data and information collections were completed, raw binary data were converted into the universal ASCII RINEX format; all data are provided in this format with the necessary information for precise processing. In order to make the data archive readily consultable, we developed software allowing the user to easily search and obtain the needed data by simple alphanumeric and geographic queries.

Deuteration of metals through electric discharges; Deuteracion de metales bajo descargas electricas

Energy Technology Data Exchange (ETDEWEB)

Balderas G, L M

1996-12-31

In this work deuteration of titanium and a stainless steel through electrical discharges in a vacuum chamber was performed at different thermodynamic conditions. The samples were plates of 0.03 x 4.5 x 54 cm. The titanium sample was first cleaning with chloroform. The oxide layer was removed by cleaning the sample with a 1:1:1 mixture of water, nitric acid and sulphuric acid. Later was rinsed in water and dried with acetone. Finally, was treated with HCl to form an hydride layer on the surface. The stainless steel sample was only cleaned with soap and cleaning with acetone. The samples were cleaning at low pressure for several days with high temperature short cycles. The deuterium was loaded to the chamber at room temperature having absorption on the titanium samples at 10{sup 3} at 10{sup 1} mbar. Afterwards that the samples were heated up at 330 C and was observed the deuterium absorption in the same pressure range. Forced deuteration through electrical discharges between the sample and the chamber was tried obtaining absorption in the range of 10{sup 3} at 10{sup 2} mbar, however the deuterium absorption only was observed in specific cases. In order to detect neutron emission or released particles in this experiment were used alanine detectors and series of plastic CR-39 and borate films. No neutron were detected in the passive systems used in the experiments. (Author).

Options of electric generation and sustainability; Opciones de generacion electrica y sustentabilidad

Energy Technology Data Exchange (ETDEWEB)

Martin del Campo M, C. [UNAM, Facultad de Ingenieria, Laboratorio de Analisis en Ingenieria de Reactores Nucleares, Paseo Cuauhnahuac 8532, Jiutepec, Morelos (Mexico)

2004-07-01

In this paper a study on the sustainability of the main electricity generation options is presented. The study is based on a matrix of sustainability indicators developed in Switzerland. A revision of some sustainability studies performed in countries with certain energy diversity and with experience in nuclear power plants operation, is done. Studies, in general, are performed for the power plant life cycle, taking into account economic aspects, fuel prices impact on electricity generation costs, fuel reserves indicators and material consumption. Air emission, waste production and human health impact data are also presented. All the results lead to confirm that nuclear energy has a high degree of sustainability vis a vis other options based on fossil fuels and renewable. Finally some comments are presented in order to highlight the importance that nuclear energy might have in the sustainable development of Mexico. (Author)

Tomografia elétrica 2D e gravimetria para detecção de sítio contaminado por derivados de petróleo em área de passivo ambiental

Directory of Open Access Journals (Sweden)

Valter Antonio Becegato

Full Text Available RESUMO Foram realizados ensaios geofísicos, como caminhamento elétrico (arranjo dipolo-dipolo com AB=MN=4 m, totalizando 1.024 m de perfis, e levantamento gravimétrico, totalizando 273 estações separadas de 4 em 4 m. Os valores máximos, mínimo, médio e desvio padrão da resistividade elétrica real em ohm.m foram, respectivamente: 35, 2.276, 432 e 344. Com relação às anomalias gravimétricas Bouguer, observou-se que a porção oriental é caracterizada por sinais com maiores amplitudes, em contraposição ao segmento ocidental, onde as mesmas são intermediárias a baixas, destacando-se valores mínimos entre as estações 0-44 m das linhas L4, L5 e L6. Detectou-se a presença de hidrocarboneto a 3 m de profundidade, nas linhas L8 e L9. Análises laboratoriais das amostras de solos e água apontaram valores PHAs que excedem os parâmetros estabelecidos pela resolução CONAMA nº 357/2005.

Prototype of a control board solar tracking mechanism on a shaft; Prototipo de una tarjeta de control del mecanismo de seguimiento solar en un eje

Energy Technology Data Exchange (ETDEWEB)

Ramos Berumen, Carlos; Ramirez Benitez, Juan Rafael; Lopez Perez, Manuel de Jesus; Beltran Adan, Jose; Lagunas Mendoza, Javier [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2010-11-15

A solar concentrator prototype of Parabolic Trough (PT) for solar process heat generation has been designed, manufactured and put into operation by the Instituto de Investigaciones Electricas. By means of a sun tracking mechanism controlled by an automatic device, the PT is moving from East to West during the day then this way the solar energy is focused continually over the lineal receiver. Such movement is reached thanks to the electronic module fitted with special software. In this paper, the design of an electronic module based on calculation algorithm of the sun position along the day and over the year which controls the PT sun tracking is presented. The main purpose of the development is to integrate a control system which is using the algorithm of low cost (it was tested in a commercial system with success). [Spanish] El Instituto de Investigaciones Electricas (IIE) ha disenado, fabricado y puesto en operacion un prototipo de concentrador solar de canal parabolico para la generacion de calor de proceso. La tecnologia termosolar a concentracion de canal parabolica mantiene el concentrador moviendose de este a oeste durante el dia, enfocando continuamente el sol en el receptor lineal, mediante un mecanismo y un control automatico que permite el seguimiento aparente del sol. Se ha desarrollado el software para el control del mecanismo de seguimiento solar. En este articulo se presenta el diseno de un modulo electronico que controla el mecanismo de seguimiento solar de un canal parabolico, el cual tiene sus bases en un algoritmo que calcula la posicion del sol durante todo el dia y a lo largo del ano. El proposito principal es integrar un sistema de control de bajo costo, que utilice el algoritmo desarrollado por el IIE, el cual fue probado con exito en un sistema comercial para el seguimiento solar de un canal parabolico.

The Villas Carrousel PV-Wind Hybrid Project

Energy Technology Data Exchange (ETDEWEB)

Huacuz, Jorge M. [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1997-12-31

A pilot project was carried out to supply electrical services for an ecological hotel (eco-hotel), using solar and wind energy in Southeast Mexico. Fifteen small photovoltaic-wind hybrid systems were designed and built by researchers of the Electrical Research Institute of Mexico (IIE), as part of a cooperation agreement with the mexican company Carrousel Operadora Turistica, aimed at developing a technology package to supply electrical services to similar hotels sited in remote areas. Each hybrid system includes one wind generator of 500W nominal capacity, one PV panel ranging in power from 150W to 320 Watts peak, one lead-acid battery bank of 570 ampere-hour in capacity, and an electronic charge controller. This paper describes the systems and summarizes the results from the first twelve months of operation. [Espanol] Se llevo a cabo un proyecto piloto para el suministro de servicios electricos a un hotel ecologico (eco-hotel), utilizando energia solar y energia del viento en el Sudeste de Mexico. Investigadores del Instituto de Investigaciones Electricas de Mexico, disenaron y construyeron quince pequenos sistemas hibridos fotovoltaicos-viento, como parte de un acuerdo de cooperacion con la compania mexicana Carrousel Operadora Turistica, orientado al desarrollo de un paquete tecnologico para proporcionar servicios de energia electrica a hoteles similares ubicados en areas remotas. Cada sistema hibrido incluye un aero-generador con capacidad nominal de 500W un panel foto-voltaico con una potencia que varia entre los 150W y los 320W pico, una banco de baterias de plomo-acido de 570 amperes-hora de capacidad y un controlador electronico de carga. Este articulo describe los sistemas y presenta un resumen de los resultados de los primeros doce meses de operacion.

Technological tendencies for the improvement of the performance of combined cycle power stations; Tendencias tecnologicas para el mejoramiento del desempeno de centrales de cilco combinado

Energy Technology Data Exchange (ETDEWEB)

Sanchez P, Marino; Garduno R, Raul; Chavez T, Rafael [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2001-07-01

In this article are dealt some the aspects that have turned the combined cycle generating power stations (CCGPS) into the dominant way for the electrical generation in the world. In the first part it is presented the plan of expansion of the national electrical generation and similar information that the U.S.A. has for the CCGPS, which will give an idea of the importance and the impact that has this technology at the moment. The basic characteristics that are necessary to specify in order to satisfy the environmental and operation requirements, and the available technologies to increase the global efficiency of the CCGPS are also exposed. Finally it describes the evolution of the technology of control for CCGPS developed in the Gerencia de Control e Instrumentacion (GCI), as well as the capacities available to support the electrical sector in this technological discipline. [Spanish] En este articulo se tratan algunos de los aspectos que han convertido a las centrales de generacion de ciclo combinado (CGCC) en el modo dominante para la generacion electrica en el mundo. En la primera parte se presenta el plan de expansion de la generacion electrica nacional e informacion similar que los EE.UU. tienen para las CGCC, lo que dara una idea de la importancia y del impacto que tiene actualmente esta tecnologia. Se exponen tambien las caracteristicas principales que es necesario especificar a fin de satisfacer los requerimientos ambientales y de operacion, y las tecnologias disponibles para incrementar la eficiencia global de las CGCC. Finalmente se describe la evolucion de la tecnologia de control para CGCC desarrollada en la Gerencia de Control e Instrumentacion (GCI), asi como las capacidades disponibles para apoyar al sector electrico en esta disciplina tecnologica.

Opportunities for the operation of the Comision Federal de Electricidad`s fossil fuel power plant stations eventually to be retired as cogeneration units; Oportunidades de operar las centrales termoelectricas de la Comision Federal de Electricidad, eventualmente retirables como unidades de cogeneracion

Energy Technology Data Exchange (ETDEWEB)

Buendia Dominguez, E. H. [Instituto de Investigaciones Electricas, Cuernavaca (Mexico); Merlos Rueda, R. M. [Programa de Ahorro de Energia para el Sector Electrico, Mexico, D. F. (Mexico)

1995-12-31

The Programa de Ahorro de Energia para el Sector Electrico (PAESE) (Program for Energy Conservation for the Electric Sector) in collaboration with the Instituto de Investigaciones Electricas (IIE), decided to evaluate technically and economically the possibilities of operating the Comision Federal de Electricidad`s Thermoelectric Power Stations (TPS), eventually to be retired as cogeneration units in supplying thermal energy to industry. The study was focussed to the Monterrey and San Jeronimo Power Stations, determining in a first stage, the optimum radius for handling and transporting steam and/or hot water and so to define the industries that potentially could obtain heat energy from the TPS, in this stage the thermal needs of the evaluated industries were determined (pressure, temperature and flow). In a second stage, the different arrangements to be made to operate the selected TPS, so as to be in position of satisfying such thermal energy demands were evaluated. This paper presents the results of this study. [Espanol] El Programa de Ahorro de Energia para el Sector Electrico (PAESE), en colaboracion con el Instituto de Investigaciones Electricas, decidieron evaluar tecnica y economicamente las posibilidades de operar las centrales termoelectricas (CT`s) de la Comision Federal de Electricidad, eventualmente retirables, como unidades de cogeneracion al ofrecer calor a la industria. El estudio se enfoco en las centrales de Monterrey y San Jeronimo, determinado en una primera etapa el radio optimo para el manejo y transporte de vapor y/o agua caliente y asi definir a las industrias que potencialmente podrian recibir calor de las CT`s, en esta etapa se determinaron las necesidades termicas de las industrias evaluadas (presion, temperatura y flujo). En una segunda etapa se evaluo los diferentes arreglos para operar las CT`s seleccionadas para que pudieran satisfacer dichas demandas termicas. En este trabajo se presentaron los resultados de dicho estudio.

Module generator of plans for dynamic processes; Modulo generdor de planes para procesos dinamicos

Energy Technology Data Exchange (ETDEWEB)

Reyes B, Alberto; Fernandez J, Jose L [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2002-07-01

This work describes the generating module of plans (Geplan) as a part of the project: Development of Techniques of Intelligent Planning for Dynamic Processes, based on techniques of artificial intelligence, and that is being developed in the Gerencia de Control e Instrumentacion the Instituto de Investigaciones Electricas (IIE). The study case corresponds to the elaboration of a plan to help the plant operators in the task of taking a combined cycle central (CCC) to a stable state of operation given a specific load level. The architecture of the module generator of plans is presented and the codification of the actions allowed (ACT) is illustrated by means of rules, in addition the challenges that are due to face so that the system operates in line with the process. Also the technical aspects of the generator of plans, as well as the benefits and expectations of their use in any CCC are mentioned. [Spanish] En este trabajo se describe el modulo generador de planes (Geplan) como parte del proyecto Desarrollo de Tecnicas de Planificacion Inteligente para Procesos Dinamicos, basado en tecnicas de inteligencia Artificial, y que estan desarrollandose en la Gerencia de Control e Instrumentacion del Instituto de Investigaciones Electrica (IIE). El caso de estudio corresponde a la elaboracion de un plan para asistir a los operadores de planta en la tarea de llevar una central de ciclo combinado (CCC) a un estado estable de operacion dedo un nivel de carga especifico. Se presenta la arquitectura del modulo generador de planes y se ilustra la codificacion de las acciones permitidas (ACT) mediante reglas, ademas los retos que se deben enfrentar para que el sistema opere en linea con el proceso. Tambien se mencionan los aspectos tecnicos del generador de planes, asi como los beneficios y expectativas de su uso en cualquier CCC.

Opportunities for the operation of the Comision Federal de Electricidad`s fossil fuel power plant stations eventually to be retired as cogeneration units; Oportunidades de operar las centrales termoelectricas de la Comision Federal de Electricidad, eventualmente retirables como unidades de cogeneracion

Energy Technology Data Exchange (ETDEWEB)

Buendia Dominguez, E H [Instituto de Investigaciones Electricas, Cuernavaca (Mexico); Merlos Rueda, R M [Programa de Ahorro de Energia para el Sector Electrico, Mexico, D. F. (Mexico)

1996-12-31

The Programa de Ahorro de Energia para el Sector Electrico (PAESE) (Program for Energy Conservation for the Electric Sector) in collaboration with the Instituto de Investigaciones Electricas (IIE), decided to evaluate technically and economically the possibilities of operating the Comision Federal de Electricidad`s Thermoelectric Power Stations (TPS), eventually to be retired as cogeneration units in supplying thermal energy to industry. The study was focussed to the Monterrey and San Jeronimo Power Stations, determining in a first stage, the optimum radius for handling and transporting steam and/or hot water and so to define the industries that potentially could obtain heat energy from the TPS, in this stage the thermal needs of the evaluated industries were determined (pressure, temperature and flow). In a second stage, the different arrangements to be made to operate the selected TPS, so as to be in position of satisfying such thermal energy demands were evaluated. This paper presents the results of this study. [Espanol] El Programa de Ahorro de Energia para el Sector Electrico (PAESE), en colaboracion con el Instituto de Investigaciones Electricas, decidieron evaluar tecnica y economicamente las posibilidades de operar las centrales termoelectricas (CT`s) de la Comision Federal de Electricidad, eventualmente retirables, como unidades de cogeneracion al ofrecer calor a la industria. El estudio se enfoco en las centrales de Monterrey y San Jeronimo, determinado en una primera etapa el radio optimo para el manejo y transporte de vapor y/o agua caliente y asi definir a las industrias que potencialmente podrian recibir calor de las CT`s, en esta etapa se determinaron las necesidades termicas de las industrias evaluadas (presion, temperatura y flujo). En una segunda etapa se evaluo los diferentes arreglos para operar las CT`s seleccionadas para que pudieran satisfacer dichas demandas termicas. En este trabajo se presentaron los resultados de dicho estudio.

Diffuse control of gas turbines in power stations of combined cycle; Contral difuso de turbinas de gas en centrales de ciclo combinado

Energy Technology Data Exchange (ETDEWEB)

Sanchez P, Marino; Garduno R, Raul; De Lara J, Salvadror; Castelo C, Luis [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2001-07-01

In this article the application of the technology of the fuzzy logic to the control of gas turbines is presented in order to evaluate it in one of the most difficult processes and with stricter control requirements that exist in the electrical generation industry. For being important for the generation electrical sector, given their use in Comision Federal de Electricidad (CFE), the first selected prototype was the gas turbines model W501 of Westinghouse, installed in the of combined cycle power stations of Dos Bocas, Veracruz, Gomez Palacio, Durango and Tula, Hidalgo, Mexico. The second selected prototype was the one of the turbo gas units type 5001 (that applies to the GE 5001 models and Westinghouse of series 191 and 251). Based on the analysis of the performance of the system of conventional control previously made, the controllers of speed and generation of electrical power were selected to be replaced by diffuse controllers. [Spanish] En este articulo se presenta la aplicacion de la tecnologia de la logica difusa al control de turbinas de gas con el proposito de evaluarla en uno de los procesos mas dificiles y con requerimientos mas estrictos de control que existen en la industria de generacion electrica. Por ser importantes para el sector electrico de generacion, dada su utilizacion en Comision Federal de Electricidad (CFE), el primer prototipo seleccionado fueron las turbinas de gas modelo W501 de Westinghouse, instaladas en la central de ciclo combinado de Dos Bocas, Veracruz, Gomez Palacio, Durango y Tula, Hidalgo, Mexico. El segundo prototipo seleccionado fue el de unidades turbogas tipo 5001 (que aplica a los modelos GE 5001 y Westinghouse de la serie 191 y 251). Basados en el analisis del desempeno del sistema de control convencional realizado previamente, los controladores de velocidad y de generacion de potencia electrica fueron seleccionados para ser sustituidos por controladores difusos.

Technological Prospective (Chapter 3 in 'A vision of year 2030 on the use of the renewable energies in Mexico'); Prospectiva tecnologica (Capitulo 3 en 'Una vision al 2030 de la utilizacion de las energias renovables en Mexico')

Energy Technology Data Exchange (ETDEWEB)

Mulas del Pozo, Pablo [Universidad Autonoma Metropolitana, Mexico, D.F. (Mexico)

2005-08-15

In this chapter it is described how the prospective analysis is carried on in: the trash and its transformation into energy that is made through thermal or biological processes; geothermal, where the relation with low and intermediate temperature resources will be differentiated from those of high temperature for electrical power generation; thermo-solar, that is a high temperature system for electrical power generation and low temperature systems for space heating or process heat; photovoltaic, that is the direct conversion of solar radiation into electricity; the wind energy is the advantage of the kinetic energy of the wind; the use of the biomass or its derivatives requires of transformations on the basis of processes of direct combustion; the gasification or pyrolysis to produce, either in direct form or through the production of a synthetic gas, process heat or electricity in facilities and, mini-hydro energy. [Spanish] En este capitulo se describe como es llevado el analisis prospectivo en: la basura y su transformacion en energia que se realiza a traves de procesos termicos o de procesos biologicos; la geotermia donde se distinguira la relacion con los recursos de temperatura baja e intermedia y los de alta temperatura para generacion electrica; la termosolar que es un sistema de alta temperatura para generacion electrica y sistema de baja temperatura para acondicionamiento de espacios o calor de proceso; fotovoltaico que es la conversion directa de la radiacion solar a electricidad; la energia eolica es el aprovechamiento de la energia cinetica del viento; la utilizacion de la biomasa o sus derivados requiere de transformaciones en base a procesos de combustion directa; la gasificacion o pirolisis para producir, o bien en forma directa o a traves de la produccion de un gas sintetico, calor de proceso o electricidad en instalaciones y, la minihidroenergia.

Fuel oil-water emulsions to reduce unburned particle emissions from boilers; Emulsiones agua en combustoleo para reducir las emisiones de particulas inquemadas en calderas

Energy Technology Data Exchange (ETDEWEB)

Diego Marin, Antonio; Ocampo Barrera, Rene; Martinez Flores, Marco Antonio; Tamayo Flores, Gustavo Adolfo; Alarcon Quiroz, Ernesto [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1997-12-31

To diminish the problems caused by fuels in boilers such as abnormal soiling of heat interchange surfaces, decrease of thermal and combustion efficiencies and increment of pollutants it is proposed the utilization of fuel oil water emulsions. This technology process is described, its development and application in other countries is shown and mention is made of the experiences in this regard at the Instituto de Investigaciones Electricas (IIE), as well as the perspectives this technology has in Mexico. In conclusion, the fuel oil water emulsion is an alternative that can help burning efficiently the fuel oil and so to contribute to fulfill with the limits established by the environmental regulations on pollutant emissions. The development of this technology is economical and of simple application, compared with others, such as the installation of new burners, the utilization of a commercial technology for flue gas conditioning, etcetera [Espanol] Para disminuir los problemas ocacionados por el combustoleo en las calderas como: ensuciamientos anormales de las superficies de intercambio de calor, disminucion de eficiencias termicas y de combustion e incremento de las emisiones, se propone la utilizacion de la emulsion de agua en combustoleo. Se describe el proceso de esta tecnologia, se muestra su desarrollo y aplicacion en otros paises y se mencionan las experiencias a este respecto en el Instituto de Investigaciones Electricas (IIE), asi como las perspectivas que tiene esta tecnologia en Mexico. En conclusion, la emulsion de agua en combustoleo es una alternativa que puede ayudar a quemar eficientemente al combustoleo y asi contribuir a cumplir con los limites de emisiones que establecen normas ambientales. El desarrollo de esta tecnologia es economica y de aplicacion sencilla, comparada con otras como: la instalacion de nuevos quemadores, la utilizacion de una tecnologia comercial para acondicionar los gases de combustion, etcetera

Development and implementation of a methodology to simultaneously determine the thermal properties of rocks; Desarrollo e implantacion de una metodologia experimental para determinar simultaneamente las propiedades termicas de las rocas

Energy Technology Data Exchange (ETDEWEB)

Contreras Lopez, Enrique; Garcia Gutierrez, Alfonso [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1996-12-31

In the frame of the experimental infrastructure development of the Reservoirs Laboratory of the Geothermal Department of the Instituto de Investigaciones Electricas (IIE), a methodology that allows the simultaneous determination of the thermal conductivity, thermal diffusivity and specific heat in rock samples and other solid materials of low and medium conductivity, was implemented. The methodology is based in the theoretical solution of temperature distribution around an ideal linear heat source immersed in an infinite medium. The three properties are derived from one relatively simple experiment, that essentially consists in recording the temporary temperature variation in a given point of the specimen during a short heating period. This methodology has special application in the geothermal area, as well as in other areas related to the development and exploitation of underground energy and mineral resources. [Espanol] En el marco de las actividades de desarrollo de infraestructura experimental del Laboratorio de Yacimientos del Departamento de Geotermia del Instituto de Investigaciones Electricas (IIE), se implemento una metodologia que permite determinar simultaneamente la conductividad termica, la difusividad termica y el calor especifico en muestras de rocas y otros materiales solidos de conductividad baja e intermedia. La metodologia se basa en la solucion teorica de la distribucion de temperatura alrededor de una fuente lineal ideal de calor inmersa en un medio infinito. Las tres propiedades se derivan de un solo experimento relativamente simple, que consiste esencialmente en registrar la variacion temporal de la temperatura en un punto dado del especimen durante un corto periodo de calentamiento. Esta metodologia tiene especial aplicacion en el ambito de la geotermia, asi como en otras areas relacionadas con el desarrollo y aprovechamiento de los recursos energeticos y minerales del subsuelo.

Technical-economical diagnosis to schedule the maintenance shut downs of thermal power stations departing from behavior, economic engineering and thermo-economic tests; Diagnostico tecnico economico para programar las salidas a mantenimiento de centrales termicas a partir de pruebas de comportamiento, ingenieria economica y termo economia

Energy Technology Data Exchange (ETDEWEB)

Arreguin Arredondo, Antonio

2002-08-01

The thesis work develops a methodology to determine when it is convenient, technically and economically to provide maintenance to a thermal electric unit and the type of maintenance to be performed, all this sustained in an economic analysis taking into account the variation of the production costs, of the interest rates, of the fuel prices and of the electric energy prices, the maintenance costs and the degradation of the unit in the time. Once analyzed the previous matters a thermo-economic test model and reference (values provided by the manufacturer) is performed and they are compared to determine in what equipment or system of the process of electric energy generation is required to focus on the material resources as well as on the human resources, in order to obtain the best results from the maintenance and recover the greatest possible efficiency of the unit. [Spanish] El trabajo de tesis desarrolla una metodologia para determinar cuando conviene, tecnica y economicamente proporcionar mantenimiento a una unidad termica y el tiempo de mantenimiento a realizar, todo esto sustentado en un analisis economico tomando en cuenta la variacion de los costos de produccion de las tasas de interes, de los precios del combustible y de la energia electrica, el costo de mantenimiento y la degradacion de la unidad en el tiempo. Una vez analizado lo anterior se realiza un modelo termoeconomico de prueba y referencia (valores proporcionados por el fabricante) y se comparan para determinar en que equipos o sistema del proceso de generacion de energia electrica se requiere enfocar tanto los recursos materiales como humanos, con el fin de obtener mejores resultados del mantenimiento y recuperar lo mayor posible la eficiencia de la unidad.

Trust No. 728 FIPATERM; Fideicomiso No. 728 FIPATERM

Energy Technology Data Exchange (ETDEWEB)

Comision Federal de Electricidad (CFE)

2005-07-01

The FIPATERM is an agency of the Administracion Publica Paraestatal, created to administer economic resources destined to programs or projects benefiting the economy or the social welfare of the country. It is a legally constituted trust and it has the aim, among others, of developing support programs for the energy saving by means of financing actions for energy diagnoses, substitution of low efficiency air conditioning equipment and refrigerators by ones of high efficiency, as well as heat insulation of house ceilings. The trust Num. 728 FIPATERM, has as its main aim, to design actions tending to the saving and efficient use of the electrical energy in benefit of the clients of Comision Federal de Electricidad (CFE), contracted in domestic tariff. In order to carry out the aims of the Trust Num. 728, the Program of Electrical Energy Saving was implemented -which for advertising purposes was denominated: Programa de Ahorro Sistematico Integral (ASI) [Spanish] El FIPATERM es un organismo de la Administracion Publica Paraestatal, creado para administrar recursos economicos destinados a programas o proyectos que beneficien la economia o el bienestar social del pais. Es un fideicomiso legalmente constituido y que tiene como fin entre otros, desarrollar programas de apoyo al ahorro de energia financiando acciones de diagnosticos energeticos, sustitucion de aparatos de aire acondicionado y refrigeradores de baja eficiencia por alta eficiencia, asi como aislamiento termico de techos de vivienda. El fideicomiso Num. 728 FIPATERM, tiene como fin principal, disenar acciones tendientes al ahorro y uso eficiente de la energia electrica en beneficio de los clientes de la Comision Federal de Electricidad (CFE), contratados en tarifa domestica. Para llevar a cabo los fines del Fideicomiso Num. 728, se implemento el Programa de Ahorro de Energia Electrica, mismo que para fines publicitarios se denomino: Programa de Ahorro Sistematico Integral (ASI)

Development and implementation of a methodology to simultaneously determine the thermal properties of rocks; Desarrollo e implantacion de una metodologia experimental para determinar simultaneamente las propiedades termicas de las rocas

Energy Technology Data Exchange (ETDEWEB)

Contreras Lopez, Enrique; Garcia Gutierrez, Alfonso [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1997-12-31

In the frame of the experimental infrastructure development of the Reservoirs Laboratory of the Geothermal Department of the Instituto de Investigaciones Electricas (IIE), a methodology that allows the simultaneous determination of the thermal conductivity, thermal diffusivity and specific heat in rock samples and other solid materials of low and medium conductivity, was implemented. The methodology is based in the theoretical solution of temperature distribution around an ideal linear heat source immersed in an infinite medium. The three properties are derived from one relatively simple experiment, that essentially consists in recording the temporary temperature variation in a given point of the specimen during a short heating period. This methodology has special application in the geothermal area, as well as in other areas related to the development and exploitation of underground energy and mineral resources. [Espanol] En el marco de las actividades de desarrollo de infraestructura experimental del Laboratorio de Yacimientos del Departamento de Geotermia del Instituto de Investigaciones Electricas (IIE), se implemento una metodologia que permite determinar simultaneamente la conductividad termica, la difusividad termica y el calor especifico en muestras de rocas y otros materiales solidos de conductividad baja e intermedia. La metodologia se basa en la solucion teorica de la distribucion de temperatura alrededor de una fuente lineal ideal de calor inmersa en un medio infinito. Las tres propiedades se derivan de un solo experimento relativamente simple, que consiste esencialmente en registrar la variacion temporal de la temperatura en un punto dado del especimen durante un corto periodo de calentamiento. Esta metodologia tiene especial aplicacion en el ambito de la geotermia, asi como en otras areas relacionadas con el desarrollo y aprovechamiento de los recursos energeticos y minerales del subsuelo.

Fuel oil-water emulsions to reduce unburned particle emissions from boilers; Emulsiones agua en combustoleo para reducir las emisiones de particulas inquemadas en calderas

Energy Technology Data Exchange (ETDEWEB)

Diego Marin, Antonio; Ocampo Barrera, Rene; Martinez Flores, Marco Antonio; Tamayo Flores, Gustavo Adolfo; Alarcon Quiroz, Ernesto [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1998-12-31

To diminish the problems caused by fuels in boilers such as abnormal soiling of heat interchange surfaces, decrease of thermal and combustion efficiencies and increment of pollutants it is proposed the utilization of fuel oil water emulsions. This technology process is described, its development and application in other countries is shown and mention is made of the experiences in this regard at the Instituto de Investigaciones Electricas (IIE), as well as the perspectives this technology has in Mexico. In conclusion, the fuel oil water emulsion is an alternative that can help burning efficiently the fuel oil and so to contribute to fulfill with the limits established by the environmental regulations on pollutant emissions. The development of this technology is economical and of simple application, compared with others, such as the installation of new burners, the utilization of a commercial technology for flue gas conditioning, etcetera [Espanol] Para disminuir los problemas ocacionados por el combustoleo en las calderas como: ensuciamientos anormales de las superficies de intercambio de calor, disminucion de eficiencias termicas y de combustion e incremento de las emisiones, se propone la utilizacion de la emulsion de agua en combustoleo. Se describe el proceso de esta tecnologia, se muestra su desarrollo y aplicacion en otros paises y se mencionan las experiencias a este respecto en el Instituto de Investigaciones Electricas (IIE), asi como las perspectivas que tiene esta tecnologia en Mexico. En conclusion, la emulsion de agua en combustoleo es una alternativa que puede ayudar a quemar eficientemente al combustoleo y asi contribuir a cumplir con los limites de emisiones que establecen normas ambientales. El desarrollo de esta tecnologia es economica y de aplicacion sencilla, comparada con otras como: la instalacion de nuevos quemadores, la utilizacion de una tecnologia comercial para acondicionar los gases de combustion, etcetera

Monitoring and control system for the charging of batteries in photovoltaic applications; Sistema para monitorizar y controlar la carga de baterias en aplicaciones fotovoltaicas

Energy Technology Data Exchange (ETDEWEB)

Ortega S, Cesar A; Pacheco A, Maria Jojutla; Orozco V, Jaime A; Cristin V, Miguel A [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2004-07-01

The appropriate monitoring and control of the charging of lead-acid (LAB) batteries is an increasing necessity in an industry that demands systems with low maintenance costs and high availability. The problem of extending the batteries useful life becomes more complex when the batteries are charged through photovoltaic panels. The purpose of the present article is to offer the description of the system for monitoring and control for the charging of batteries developed at the Instituto de Investigaciones Electricas (IIE). This system performs a continuous monitoring of the charging state of the battery and of the main operation parameters. With the extracted information of the data, the fine tuning algorithm control can be made. The data are acquired in a personal computer through a serial connection. Once stored, they are presented to the user in a graphical way so that they can be analyzed. [Spanish] El adecuado monitoreo y control de carga de baterias plomo-acido (BPA) es una necesidad creciente en una industria que demanda sistemas con bajos costos de mantenimiento y alta disponibilidad. El problema de extender la vida util de las baterias se vuelve mas complejo cuando las baterias son cargadas a traves de paneles fotovoltaicos. La intencion del presente articulo es ofrecer la descripcion del sistema para monitoreo y control de carga de baterias desarrollado en el Instituto de Investigaciones Electricas (IIE). Este sistema realiza un monitoreo continuo del estado de carga de la bateria y de los principales parametros de operacion. Con la informacion extraida de los datos, se puede hacer la sintonizacion fina del algoritmo de control. Los datos se adquieren en una computadora personal a traves de un enlace serial. Una vez almacenados, se presentan al usuario de manera grafica para que puedan ser analizados.

Allocation of the transmission service cost with base in marginal costs of the transmission network expansion; Asignacion del costo del servicio de transmision con base en costos marginales de expansion de la red de transmision

Energy Technology Data Exchange (ETDEWEB)

Ruiz Casillas, Manuel E.; Nieva Gomez, Rolando [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

2001-07-01

The transmission charges to the users must be completely defined in those systems where the restructuring has broken up the traditional functions of the companies; in order to introduce competition in the generation and commercialization segments of the electrical energy. The fundamentals of a method used are explained to assure the transmission service cases between their users. The method is based on the marginal expansion costs of the transmission network. Their more known applications have been in competitive markets of energy, in particular, where the energy price is the same one in all the localities. Nevertheless, it can be used under other forms of organization of the electrical industry. In order to illustrate results, the obtained ones from their application to the most important part of the transmission network of the Mexican system that operates interconnected, are presented. [Spanish] Los cargos de transmision a los usuarios deben estar completamente definidos en aquellos sistemas donde la reestructuracion ha desagregado las funciones tradicionales de las empresas; para introducir competencia en los segmentos de generacion y comercializacion de la energia electrica. Se explican los fundamentos de un metodo utilizado para asegurar los casos del servicio de transmision entre sus usuarios. El metodo se basa en los costos marginales de expansion de la red de transmision. Sus aplicaciones mas conocidas han sido en mercados competitivos de energia, en particular, donde el precio de la energia es el mismo en todas las localidades. Sin embargo, puede utilizarse bajo otras formas de organizacion de la industria electrica. Con el proposito de ilustrar resultados, se muestran los obtenidos de su aplicacion a la parte mas importante de la red de transmision del sistema mexicano que opera interconectada.

Sizing an isolated wind-solar-fuel cell generation system based on the particle swarm optimization method; Dimensionamiento de un sistema de generacion aislado eolico-solar-celda de combustible basado en el metodo de optimizacion de enjambre de particulas

Energy Technology Data Exchange (ETDEWEB)

Sanchez-Huerta, V; Ramirez-Arredondo, Juan M. [Universidad de Quintana Roo, Chetumal, Quintana Roo (Mexico)]. E-mail: vsanchez@gdl.cinvestav.mx; Arriaga-Hurtado, L. G. [CIDETEQ, Queretaro (Mexico)

2009-09-15

Sizing an electric energy system requires an analysis of investment, maintenance and operating costs. In the case of a generation system that uses renewable sources, optimal capacity becomes more complex compared to a conventional system, because of the randomness of renewable resources (wind, solar) and the still high costs of wind and photovoltage generator modules. This work presents the optimal sizing of a wind-solar-fuel cell generation system, minimizing the costs of the system while satisfying the energy demands of an isolated charge. The optimization method used is based on an evolutionary programming technique known as particle swarms (PSO-particle swarm optimization). The generation of energy with a hybrid system is discussed, based on the profile of insolation and wind availability at the site, with the objective of satisfying a specific electric demand. [Spanish] El dimensionamiento de un sistema de generacion de energia electrica requiere un analisis de los costos de inversion, mantenimiento y operacion. En el caso de un sistema de generacion que utiliza fuentes renovables la capacidad optima resulta mas compleja con respecto a un sistema convencional, debido a la aleatoriedad de los recursos renovables (eolico, solar), y a los aun altos costos de generadores eolicos y modulos fotovoltaicos. En este trabajo se presenta el dimensionamiento optimo de un sistema de generacion eolico-solar-celda de combustible minimizando los costos del sistema que satisfaga la energia demandada por una carga aislada. El metodo de optimizacion utilizado esta basado en una tecnica de programacion evolutiva conocida como enjambre de particulas (PSO por sus siglas en ingles: particle swarm optimization). Se plantea la generacion de energia del sistema hibrido con base a la insolacion y el perfil del viento disponible en sitio, con objeto de satisfacer una demanda electrica determinada.

A new aeolian generator for Mexico; Un nuevo generador eolico para Mexico

Energy Technology Data Exchange (ETDEWEB)

Voronin, Boris; Gomez Reyna, Jose Antonio; Zerquera Izquierdo, Mariano David; Cardenas Grajales, Juan Jose; Zamora Quintana, Laura Angelica [Universidad de Guadalajara (Mexico)

2009-07-01

The use of wind kinetic energy to produce electrical energy is one of the most powerful alternatives for the human being, to avoid the risk of being in the threshold of the age of stone. In the present work, different types from aero generators are analyzed and a new generator developed by one of the authors of this article is presented. Its high efficiency is presented in comparison with the helical generators that at the moment are dominant in the construction of Aeolian mills. Perspectives of exploitation of the kinetic energy of the wind in Mexico are analyzed. A resolution model of the problem of obtaining constant parameters of electrical output, to conditions of variable mechanical parameters of entrance is shown. An example is shown of the construction of Aeolian parks that can cover all the needs of electrical energy in Mexico. [Spanish] El uso de la energia cinetica del viento para la obtencion de la energia electrica, es una de las alternativas mas poderosas para el ser humano, para evitar el riesgo de estar al umbral de la edad de piedra. En el trabajo presente, se analizan diferentes tipos de aerogeneradores y se presenta un nuevo generador desarrollado por uno de los autores de este articulo. Se muestra su alta eficiencia en comparacion con los generadores helicoidales que actualmente son dominantes en la construccion de molinos eolicos. Se analizan perspectivas de aprovechamiento de la energia cinetica del viento en Mexico. Se muestra un modelo de resolucion del problema de la obtencion de parametros de salida electricos constantes, a condiciones de los parametros mecanicos de entrada variables. Se muestra un ejemplo de la construccion de parques eolicos que pueden cubrir todas las necesidades de energia electrica en Mexico.

Three-phase shots and monopolar reclose in the core network of 400 kV of the Area de Control Occidental of CFE and Its normal probability of occurrence; Disparos trifasicos y de recierre monopolar en la red troncal de 400 kV del area de control occidental, CFE, y su probabilidad normal de ocurrencia

Energy Technology Data Exchange (ETDEWEB)

Narvaez Perez, Camilo; Garcia Conejo, Dante Aristoteles [Comision Federal de Electricidad, Centro Nacional de Control de Energia, Area de Control Occidental, Zapopan, Jalisco (Mexico)]. E-mail: camilo.narvaez@cfe.gob.mx; camilo.narvaez@univa.mx; Ramirez Peredo, Patricia [Universidad de Guadalajara, Guadalajara, Jalisco (Mexico)]. E-mail: patyrape@hotmail.com; Blanco Gomez, Cesar Eduardo [Comision Federal de Electricidad, Centro Nacional de Control de Energia, Area de Control Occidental, Zapopan, Jalisco (Mexico)

2013-03-15

The growing power demand of users, who make loads of power systems, causes the components of such systems operating near its operating limits. And the transmission line, being the most common component in these, requires a thorough analysis in regard to the probability of three-phase shots and monopolars reclosing, considering thunderstorms, the demand system time, the flows circulating in lines, maintenance on other lines and other imponderantes. This research analyzes the normal probability of occurrence of shots in the 400 kV core network of the Area de Control Occidental, CFE and its impact on studies conducted prior to the maintenance. We intend to use the methodology in the Comision Federal de Electricidad and results can be validated with data from previous years, based on a pseudo shots forecast in a given period. [Spanish] La creciente demanda de energia electrica de los usuarios que componen las cargas de los sistemas electricos de potencia, provoca que los componentes de dichos sistemas funcionen cerca de sus limites operativos. Y la linea de transmision, al ser el componente mas comun en estos, requiere de un analisis minucioso en lo que respecta a la probabilidad de disparos trifasicos y recierres monopolares, considerando tormentas electricas, la demanda horaria del sistema, los flujos que circulan en las lineas, los mantenimientos en las demas lineas y demas imponderantes. En esta investigacion se analiza la probabilidad normal de ocurrencia de disparos en la red troncal de 400 kV del Area de Control Occidental y su impacto en los estudios que se realizan previos a los mantenimientos. Se pretende utilizar la metodologia en la Comision Federal de Electricidad, y los resultados pueden ser validados con datos de los anos anteriores, ya que se hace un pseudo pronostico de disparos en un periodo dado.

The Villas Carrousel PV-Wind Hybrid Project

Energy Technology Data Exchange (ETDEWEB)

Huacuz, Jorge M [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1998-12-31

A pilot project was carried out to supply electrical services for an ecological hotel (eco-hotel), using solar and wind energy in Southeast Mexico. Fifteen small photovoltaic-wind hybrid systems were designed and built by researchers of the Electrical Research Institute of Mexico (IIE), as part of a cooperation agreement with the mexican company Carrousel Operadora Turistica, aimed at developing a technology package to supply electrical services to similar hotels sited in remote areas. Each hybrid system includes one wind generator of 500W nominal capacity, one PV panel ranging in power from 150W to 320 Watts peak, one lead-acid battery bank of 570 ampere-hour in capacity, and an electronic charge controller. This paper describes the systems and summarizes the results from the first twelve months of operation. [Espanol] Se llevo a cabo un proyecto piloto para el suministro de servicios electricos a un hotel ecologico (eco-hotel), utilizando energia solar y energia del viento en el Sudeste de Mexico. Investigadores del Instituto de Investigaciones Electricas de Mexico, disenaron y construyeron quince pequenos sistemas hibridos fotovoltaicos-viento, como parte de un acuerdo de cooperacion con la compania mexicana Carrousel Operadora Turistica, orientado al desarrollo de un paquete tecnologico para proporcionar servicios de energia electrica a hoteles similares ubicados en areas remotas. Cada sistema hibrido incluye un aero-generador con capacidad nominal de 500W un panel foto-voltaico con una potencia que varia entre los 150W y los 320W pico, una banco de baterias de plomo-acido de 570 amperes-hora de capacidad y un controlador electronico de carga. Este articulo describe los sistemas y presenta un resumen de los resultados de los primeros doce meses de operacion.

Recommendations for the use of high efficiency motors; Recomendaciones para la utilizacion de motores de alta eficiencia

Energy Technology Data Exchange (ETDEWEB)

Buitron Sanchez, Horacio [Comision Federal de Electricidad, Mexico, D. F. (Mexico)

1994-12-31

In this paper the most important characteristics of the high efficiency motors are examined and the use of these motors as an alternative for the saving and efficient use of the electrical energy is proposed. The operating cost is analyzed in relation with similar standard motors and several suggestions that can help to justify its application are given. [Espanol] En este trabajo se examinan las caracteristicas relevantes de los motores de alta eficiencia y se plantea su utilizacion como alternativa para el ahorro y uso eficiente de la energia electrica. Se analiza su costo de operacion, en relacion con motores estandar similares y se dan varias sugerencias que pueden ayudar a justificar su aplicacion.

High efficiency motors; Motores de alta eficiencia

Energy Technology Data Exchange (ETDEWEB)

Uranga Favela, Ivan Jaime [Energia Controlada de Mexico, S. A. de C. V., Mexico, D. F. (Mexico)

1993-12-31

This paper is a technical-financial study of the high efficiency and super-premium motors. As it is widely known, more than 60% of the electrical energy generated in the country is used for the operation of motors, in industry as well as in commerce. Therefore the importance that the motors have in the efficient energy use. [Espanol] El presente trabajo es un estudio tecnico-financiero de los motores de alta eficiencia y los motores super premium. Como es ampliamente conocido, mas del 60% de la energia electrica generada en el pais, es utilizada para accionar motores, dentro de la industria y el comercio. De alli la importancia que los motores tienen en el uso eficiente de la energia.

Hybrid solar-electric oven construction prototype; Construccion de prototipo de horno hibrido solar-electrico

Energy Technology Data Exchange (ETDEWEB)

Hernandez Roman, M. A; Pineda Pinon, J; Arcos Pichardo, A [CICATA, Santiago de Queretaro, Queretaro (Mexico)

2013-03-15

The oven construction consists of a solar collector system of cylindrical parabolic type, a heating through electrical resistance and a curing chamber. The warm fluid is air, which is injected into the chamber through forced draft. The temperature required in the system is within a range of 150 to 300 degrees Celsius. [Spanish] La construccion del horno consta de un sistema de captacion solar del tipo cilindrico parabolico, un sistema de calentamiento a traves de resistencias electricas y una camara de curado. El fluido a calentar es aire, el cual es inyectado dentro de la camara a traves de tiro forzado. La temperatura solicitada en el sistema es dentro de un rango de 150 a 300 grados centigrados.

Method for improving the use of PASCO brand spectrophotometer using DataStudio program applied to radiometric surveys for LAFTLA

International Nuclear Information System (INIS)

Bolanos Rodriguez, Gary

2008-01-01

Escuela de Ingenieria Electrica at the Universidad de Costa Rica has developed a procedure for the improved use of a PASCO brand Spectrophotometer of the Laboratorio de Fotonica y Tecnologia Laser Aplicada. The program has used DataStudio for the application in radiometric surveys in LAFTLA. Important conclusions have been obtained by the assembly of optical experiments, software and data collection and analysis, such as the behavior of a emitting source radiation known as black body and its relation to the temperature, wavelength and intensity of light. The user guide has been detailed exposing calibrations of the sensors, the definition of constants needed for obtaining parameters and assembly and commissioning of the equipment. (author) [es

The need of alkalinity determination in the characterization of rain; Necesidad de la determinacion de la alcalinidad en la caracterizacion de la lluvia

Energy Technology Data Exchange (ETDEWEB)

Pal Verma, Mahendra [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1998-01-01

In this paper is presented the alkalinity determination of the carbonic species in the rain waters by the Gran titration method. The alkalinity values obtained by this method in low electric conductivity waters are fairly reliable. Also, the existing studies on the characterization of acid rains, are discussed. [Espanol] En este trabajo se presenta la medicion de la alcalinidad y la determinacion de las especies carbonicas en las aguas de lluvia por el metodo de la titulacion de Gran. Los valores de alcalinidad obtenidos por este metodo en las aguas de baja conductividad electrica son bastante confiables. Asimismo, se discuten los estudios existentes sobre la caracterizacion de la lluvia acida en la republica mexicana.

High efficiency motors; Motores de alta eficiencia

Energy Technology Data Exchange (ETDEWEB)

Uranga Favela, Ivan Jaime [Energia Controlada de Mexico, S. A. de C. V., Mexico, D. F. (Mexico)

1992-12-31

This paper is a technical-financial study of the high efficiency and super-premium motors. As it is widely known, more than 60% of the electrical energy generated in the country is used for the operation of motors, in industry as well as in commerce. Therefore the importance that the motors have in the efficient energy use. [Espanol] El presente trabajo es un estudio tecnico-financiero de los motores de alta eficiencia y los motores super premium. Como es ampliamente conocido, mas del 60% de la energia electrica generada en el pais, es utilizada para accionar motores, dentro de la industria y el comercio. De alli la importancia que los motores tienen en el uso eficiente de la energia.

Recommendations for the use of high efficiency motors; Recomendaciones para la utilizacion de motores de alta eficiencia

Energy Technology Data Exchange (ETDEWEB)

Buitron Sanchez, Horacio [Comision Federal de Electricidad, Mexico, D. F. (Mexico)

1993-12-31

In this paper the most important characteristics of the high efficiency motors are examined and the use of these motors as an alternative for the saving and efficient use of the electrical energy is proposed. The operating cost is analyzed in relation with similar standard motors and several suggestions that can help to justify its application are given. [Espanol] En este trabajo se examinan las caracteristicas relevantes de los motores de alta eficiencia y se plantea su utilizacion como alternativa para el ahorro y uso eficiente de la energia electrica. Se analiza su costo de operacion, en relacion con motores estandar similares y se dan varias sugerencias que pueden ayudar a justificar su aplicacion.

Hydrodynamic characterization in areas under influence in the petroleum industry; Caracterizacao hidrodinamica em areas sob influencia na industria petrolifera

Energy Technology Data Exchange (ETDEWEB)

Santos, Daniel Alexsander Silva dos; Silva, Andre Giskard Aquino da [Rio Grande do Norte Univ., Natal, RN (Brazil)]. E-mail: danielsandersilva@hotmail.com; Vital, Helenice [Conselho Nacional de Desenvolvimento Cientifico e Tecnologico (CNPq), Brasilia, DF (Brazil); Silveira, Iracema Miranda da [Museu Camara Cascudo, Natal, RN (Brazil); Chaves, Marcelo dos Santos; Lima, Zuleide Maria Carvalho [Rio Grande do Norte Univ., Natal, RN (Brazil). Programa de Pos-graduacao em Geodinamica e Geofisica

2003-07-01

For elaboration of contingency plans it is necessary to execute the mapping of sensitive areas to oil spill, as well as to create suitable forecast models for oil pollution movements. These models should start from a consistent database, so that it can encompass the several phases of the environmental monitoring. In both cases hydrodynamic data are essential. The analysis of hydrodynamic parameters is also an important phase for the knowledge of the Holocene evolution of the study area, as well as for execution of a suitable development policy to be applied on the area. The activities developed in this research involve collection of data 'in situ' at the Galinhos-Guamare and Diogo Lopes lagoons, as well as data manipulation referring to the littoral drift collected monthly along the North coast of the state of Rio Grande do Norte by members of the Grupo de Geologia e Geofisica Marinha e Melhoramento Ambiental (GGEMMA) from UFRN.

The fine structure of the dynamics of seismicity before earthquakes in the area of Reggio Emilia (Northern Italy

Directory of Open Access Journals (Sweden)

Y. Tyupki

1999-06-01

Full Text Available We present the results of studies of seismicity in the Reggio Emilia area (Northern Italy. The Istituto Nazionale di Geofisica instrumental earthquake catalogue (1975-1996 reported about three moderate-size earthquakes with M ³ 4.5 that occurred in this area (November 1983, May 1987, October 1996. The RTL prognostic parameter proposed by Sobolev and Tyupkin (1996a was used for analysis. This parameter is designed in such a way that a seismic quiescence produces negative anomaly of the RTL parameter in comparison to its perennial background level and an activation of seismicity initiates the growth of its value. The RTL prognostic parameter indicates that all three earthquakes are preceded by activation of the seismicity. The interval between the commencement of the activation identified by RTL parameter and the event itself was about one year for the 1987 and 1996 earthquakes, and about three months for the 1983 earthquake.

The development of the INGV tectonomagnetic network in the frame of the MEM Project

Directory of Open Access Journals (Sweden)

F. Masci

2007-08-01

Full Text Available In the middle of 1989, the INGV (Italian Istituto Nazionale di Geofisica e Vulcanologia installed in Central Italy a network of magnetic stations in order to investigate possible relationship of the local magnetic field with earthquakes occurrences. Actually the network consists of four stations, where the total magnetic field intensity data are being collected using proton precession magnetometers. Here we are report on the actual state and the future developments of the network. In the frame of the MEM (Magnetic and Electric fields Monitoring Project, new stations will be added to the network by the end of 2007. The results of the test campaigns carried out in the sites chosen to widen the network are also discussed. Moreover, the 2006 complete data set of the network is also reported. Concerning the data analysis, a new approach is also discussed that takes into account the inductive effects on the local geomagnetic field by means of the inter-station transfer functions time variations analysis.

Solar cycles in the last centuries in 10Be and delta18O in polar ice and in thermoluminescence signals of a sea sediment

International Nuclear Information System (INIS)

Cini Castagnoli, G.; Bonino, G.; Galli, M.; Beer, J.

1984-01-01

The cyclogram method of time series analysis has been used to analyse 10 Be data (1181-1800 AD) and delta 18 O data (1181-1960 AD) from an artic ice core and thermoluminescence data (1181-1960 AD) from a Mediterranean sediment core. The 10 Be concentrations were determined at the ETH Zurich. The delta 18 O values were measured at the University of Copenhagen. The TL measurements were performed at the Istituto di Cosmo-geofisica del C.N.R., Torino. Common mean periodicities of 10.75 y are found for the period 1505 to 1710 AD in TL and 10 Be and of 11.4 y for the period 1715 to 1880 in TL and delta 18 O. This periodicity was found in the solar sunspot (Rsub(z)) series analysed in the same way, from 1825 to 1905. This supports the argument that the common periodicities found in the long-running series are peculiar of the solar activity in the past

Geophysical investigations applied to site selection for the radioactive waste disposal; Investigacoes geofisicas aplicadas na selecao de um repositorio de rejeitos radioativos

Energy Technology Data Exchange (ETDEWEB)

Saad, Samir; Dornelles, Gerson; Pedrozo, Geraldo Arholdi [Comissao Nacional de Energia Nuclear (CNEN), Rio de Janeiro, RJ (Brazil)

1993-07-01

In this work the geophysical exploratory techniques and the results obtained for the selection of a candidate site for the final repository of the radioactive waste containing cesium-137 generated by the Goiania accident occurred in September 1987, are described. The studies were performed in an area of about 100 hectares where is located the present radioactive waste provisional repository. the geophysical investigations using electromagnetic methods (VLF-EM), electric drillings and surface and sub-surface radiometry allowed for the area monitoring and provided the geophysical parameters necessary for understanding the structural and stratigraphic context. Furthermore, they will provide data for the geotechnical, geochemical and hydrogeological investigations as well as for the engineering conceptual project for the repository construction. (author)

Analysis and evaluation of the main factors that influence the growing of the electrical power consumption in the national electrical sector, period 2000-2005; Analisis y evaluacion de los principales factores que influyen en el crecimiento del consumo de energia electrica en el sector electrico nacional, periodo 2000-2005

Energy Technology Data Exchange (ETDEWEB)

Aguilar Luna, Luis Miguel

2008-06-15

de potencia (CUFP). Ademas, se desarrolla en esta tesis las ecuaciones utilizadas en el Jacobiano del metodo Newton-Raphson, para resolver flujos de potencia incluyendo los dispositivos SIFLETCA. Se muestra diferentes aplicaciones que se tienen al instalar un dispositivo, tales como prevencion de flujos en anillo, barrera electronica, incremento en la capacidad de transmision y especificacion del flujo de potencia en lineas de transmision. Por otra parte, se desarrolla en la tesis un analisis de sensibilidades de un sistema de potencia en estado estacionario. Tambien se proponen en la tesis los parametros de control para los cuales se calcula las sensibilidades. Asimismo, se utiliza un indice de desempeno para medir el grado de congestion de un sistema electrico. Al calcular las sensibilidades se utiliza los resultados obtenidos de los flujos de potencia. Se usa 4 redes electricas para encontrar donde se debe situar cada dispositivo SIFLETCA para reducir la congestion en el sistema. Tambien, se compara el metodo desarrollado en la tesis con un metodo de sensibilidades que emplea flujos de CD para validacion y mostrar las ventajas de usar el metodo Newton en flujos de potencia.

Computer tool for the elaboration and simulation of curves of domestic users consumption; Herramienta computacional para la elaboracion y simulacion de curvas de consumo en usuarios domesticos

Energy Technology Data Exchange (ETDEWEB)

Ramos Niembro, Gaudencio; Valdez Ramos, Jorge E. [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1996-12-31

The knowledge and simulation of the end users of the electric power is a very important factor for the electric power utilities, since they allow them the long term investment planning. Formerly the electric power utilities planned their growth in base of the demand. However, nowadays new tools have been developed that allow the Demand Side Management (DSM) to be made, which consists in analyzing the end user consumption and model it, in such a way that it saves energy and uses it efficiently. To segregate the consumption curve of the domestic users in function of its end uses, it is needed to consider several factors: climatic conditions, geographic location, type of dwelling, number and ages of the members of the family occupying it, type and number of existing electric home appliances, electric power demand and its efficiency, life habits, etc. From the above it is deducted that the end users consume electric power in different ways. Consequently, the knowledge of its behavior will allow to draw its consumption curve. This is possible through field measurements (user monitoring) and/or surveys (to ask the user when and how he uses his house hold electric devices and equipment). The results of such studies must be simulated, in order to generalize and characterize behaviors, in such a way as to have available options of operational scenarios of electric devices and equipment, in order to select potential energy and demand savings. [Espanol] El conocimiento y la simulacion de los usos finales de la energia electrica, es un factor importante para las empresas electricas, ya que les permite la planeacion de sus inversiones a largo plazo. Anteriormente, las empresas electricas planeaban su crecimiento en funcion de la demanda. Sin embargo, en la actualidad se han desarrollado herramientas que permiten hacer la administracion de la energia por el lado de la demanda (Demand Side Management, DSM por sus siglas en ingles), la cual consiste en analizar el consumo del

Computer tool for the elaboration and simulation of curves of domestic users consumption; Herramienta computacional para la elaboracion y simulacion de curvas de consumo en usuarios domesticos

Energy Technology Data Exchange (ETDEWEB)

Ramos Niembro, Gaudencio; Valdez Ramos, Jorge E [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1997-12-31

The knowledge and simulation of the end users of the electric power is a very important factor for the electric power utilities, since they allow them the long term investment planning. Formerly the electric power utilities planned their growth in base of the demand. However, nowadays new tools have been developed that allow the Demand Side Management (DSM) to be made, which consists in analyzing the end user consumption and model it, in such a way that it saves energy and uses it efficiently. To segregate the consumption curve of the domestic users in function of its end uses, it is needed to consider several factors: climatic conditions, geographic location, type of dwelling, number and ages of the members of the family occupying it, type and number of existing electric home appliances, electric power demand and its efficiency, life habits, etc. From the above it is deducted that the end users consume electric power in different ways. Consequently, the knowledge of its behavior will allow to draw its consumption curve. This is possible through field measurements (user monitoring) and/or surveys (to ask the user when and how he uses his house hold electric devices and equipment). The results of such studies must be simulated, in order to generalize and characterize behaviors, in such a way as to have available options of operational scenarios of electric devices and equipment, in order to select potential energy and demand savings. [Espanol] El conocimiento y la simulacion de los usos finales de la energia electrica, es un factor importante para las empresas electricas, ya que les permite la planeacion de sus inversiones a largo plazo. Anteriormente, las empresas electricas planeaban su crecimiento en funcion de la demanda. Sin embargo, en la actualidad se han desarrollado herramientas que permiten hacer la administracion de la energia por el lado de la demanda (Demand Side Management, DSM por sus siglas en ingles), la cual consiste en analizar el consumo del

Electrical energy: what is in game; Energia electrica: lo que esta en juego

Energy Technology Data Exchange (ETDEWEB)

Miranda Robredo, R.

2004-07-01

In the occasion of the inauguration of the Academic Course in the Spanish Club of the Energy, the Endesa president made these reflections on the main factors that actually affect the development of the electrical energy.

Electric power and environment in Mexico; Energia electrica y medio ambiente en Mexico

Energy Technology Data Exchange (ETDEWEB)

Quintanilla, J. [ed.] [UNAM IIE-PUE, Ciudad Universitaria (Mexico)

1997-07-01

This volume is one of the three resulting volumes about the project named Document analysis and prospective organized by the National Autonomous University of Mexico (UNAM) through it University Energy Program (PUE). It is a non-periodical publication collection of the variable content and extent that as a whole constitutes an information heritage and an original contribution about the energy problematic as International level as at the country context and the University activities. In this book the manners of producing electrical energy are discussed, so how satisfying the growing necessities of this energy in Mexico without contaminating environment and how doing rational and efficient use of energy. The content of each document of this book is however exclusive responsibility of authors, as in the information as in their told opinions. The following papers were presented: 1) Hydroelectricity, soils use and water management. 2) The electric generation in Mexico and its environmental impacts: Past, present and future. 3) The nucleo electricity and the radioactive materials management. 4) Exposure to electromagnetic fields and its association with leukemia in children. 5) The electric power in Mexico and the supportable development. 6) Potential of electric generation at great scale with eolic energy in Mexico. 7) Toward an electric generation scheme distributed with non-conventional energies. 8) Renewable sources of energy in Mexico at the Century 21. (Author)

Power-line electrocution of birds (Electrocucion de Aves en Lineas Electricas en Mexico)

Science.gov (United States)

Patricia Manzano Fischer

2006-01-01

A result of rapid growth in human population and energy use, is proliferating power lines that electrocute birds, killing eagles and causing power outages. The United States was one of the first countries to recognize the significance of this problem. Suggested Practices for the Protection of Raptors on Power Lines, first published in the 1970s, has now been translated...

Production and consumption of energy in Chile 1987. Produccion y consumo de energia en Chile 1987

Energy Technology Data Exchange (ETDEWEB)

1987-01-01

Presents information, at a national level, on production and consumption of various types of energy, including statistical data on commercial deals (hydrocarbons, coal) and the activities of the companies (hydromechanical energy, vegetable wastes for power generation and biogas). Electrical energy is described in detail. The first chapter presents an energy overview of the country and its energy sources, evaluating each one in order to obtain the total energy produced in Chile. The second chapter deals with electric power in the country, classifying power installed, generated and consumed by category of producer, consumer and generating type. The third chapter discusses the planned capacity of the Zonas Electricas, and the fourth chapter reviews the characteristics of the installations, production statistics, consumption and operation of the grid.

Optimization of procedure for calibration with radiometer/photometer

International Nuclear Information System (INIS)

Detilly, Isabelle

2009-01-01

A test procedure for the radiometer/photometer calibrations mark International Light at the Laboratorio de Fotometria y Tecnologia Laser (LAFTA) de la Escuela de Ingenieria Electrica de la Universidad de Costa Rica is established. Two photometric banks are used as experimental set and two calibrations were performed of the International Light. A basic procedure established in the laboratory, is used for calibration from measurements of illuminance and luminous intensity. Some dependent variations of photometric banks used in the calibration process, the programming of the radiometer/photometer and the applied methodology showed the results. The procedure for calibration with radiometer/photometer can be improved by optimizing the programming process of the measurement instrument and possible errors can be minimized by using the recommended procedure. (author) [es

Automatic inspection of the main primary circuit piping at the south Ukraine nuclear power plant

International Nuclear Information System (INIS)

Tanarro, A.

1995-01-01

In response to GOSKOMATOM requests, the TPEG (from The Commission of the European Communities) undertook development of the general approach to the Project, or Terms of Reference, with a view to procuring complete financing of the project through TACIS funds. Subsequently UNESA (Unidad Electrica S.A.), as the organization responsible for the On-site Assistance Project for South Ukraine NPP, jointly reviewd the contents of the project with the plant and coordinated development throughout the initial phase, which finishes in May 1995. From the very start the definition of the Project covered all the Activities required to ensure its final objective: full autonomy for the Plant to perform inspections and the capacity required for this to be achieved to a suitable level of quality

Geo hazard studies and their policy implications in Nicaragua

Science.gov (United States)

Strauch, W.

2007-05-01

-Cerro Negro and El Hoyo volcanoes; and 4) Flood hazard map of Maravilla river. This study was realized between 2004 and 2006, through technical cooperation of Japan International Cooperation Agency with INETER, upon the request of the Government of Nicaragua. The results of the mapping and investigations are fed in a National GIS on Geohazards maintained by INETER and developed in the frame of a regional cooperation project with BGR, Germany, and other international institutions. Many maps, project reports and GIS coverage are made available on INETER´s Website to the general public. (www.ineter.gob.ni/geofisica/geofisica.html ).

A visitor study approach to INGV exhibition at Genova Science Festival 2011

Science.gov (United States)

Nave, R.; D'Addezio, G.; Carosi, A.

2012-04-01

The Istituto Nazionale di Geofisica e Vulcanologia (INGV) is one of the largest European scientific institution dealing with Earth Sciences research and seismic and volcanic surveillance. We organizes every year intense educational and outreach activities focalizing in particular on causes of earthquakes and volcanic eruptions and how to behave properly and deal with these events. This approach derived from the consciousness on the social role of a correct information on natural hazards and on the awareness that preparedness is the best way to live with and to mitigate natural hazard. The Genova Science Festival, held since 2003, is the most remarkable among the Italian Science Communication events and for or the 2011 edition, the INGV realized an exibition called COME E' PROFONDO IL MARE, la geofisica in acqua (HOW DEEP THE SEA IS, geophysics in water). The exhibition shows and explains the main geodinamic processes trough interactive exhibits and colorful panels exploring events as earthquakes, volcanic eruption and tsunami, their impact on our territory. In order to approach a visitor study related to this scientific educational path we elaborated questionnaires designed for students, for teacher and for general public. We have chosen this survey instrument for its advantage to get a wide variety of information and quantitative data. In developing the questionnaire three main aspects were taken in account: its shortness, clarity in the questions, and answers structure able to grade different indicator of visitor opinion and exhibition impact. That will also allow us to combine indicators scores during data elaboration phase. The questionnaire goes through all the section of the educational path, trying to have a feedback on the proposed layout and its efficacy. The Science Festival lasted 2 weeks and was visited by about 8000 people. During the event were handed out and recollected about 300 questionnaires that allows us to make a reliable assessment on the

EFFECT OF SILICA FUME ADDITION ON THE CHLORIDE-RELATED TRANSPORT PROPERTIES OF HIGH-PERFORMANCE CONCRETE

Directory of Open Access Journals (Sweden)

JUAN LIZARAZO-MARRIAGA

2012-01-01

Full Text Available La corrosión del acero de refuerzo, debido a la penetración de cloruro es la principal causa de problemas de durabilidad en el concreto. De esta forma, este documento resume los resultados de un estudio experimental llevado a cabo con el fin de investigar la influencia del contenido de microsilice (SF en los cloruros relacionados con algunas propiedades de transporte del concreto. Para ello, la resistencia a la compresión, la penetración de cloruros libres por difusión, la carga pasada bajo un ensayo de migración de cloruros no estacionario (ASTM C1202 y la resistividad AC, se midieron en las mezclas de concreto de alto desempeño. Cuatro mezclas de hormigón se hicieron incorporando 5, 10, y el 15% de SF, como adición al cemento Portland. Los resultados mostraron que el humo de sílice en el hormigón provoca un aumento en la resistencia y la reducción de la permeabilidad de iones de cloruro, sin embargo se encontraron diferencias claras entre los resultados de los ensayos difusión a largo plazo y las pruebas eléctricas aceleradas.

Crecimiento y caracterización de monocristales superconductores de alta temperatura crítica

Directory of Open Access Journals (Sweden)

L. T. Corredor

2003-07-01

Full Text Available En este trabajo se presenta, detalladamente, el procedimiento para la implementación de la técnica de auto-flujo para el crecimiento de monocristales superconductores de alta temperatura crítica. Fueron producidos monocristales de las familias YBa2Cu3O7-δ y CaLaBaCu3O7-δ mediante dicha técnica. El carácter superconductor de los mismo se corroboró a través de mediciones de resistividad eléctrica y susceptibilidad magnética AC. Las características cristalográficas y morfológicas se estudiaron por medio de difracción de rayos X y microscopía electrónica de barrido (SEM, microscopía metalográfica y análisis de rayos X por dispersión de energía (EDX respectivamente. Los resultados de estas caracterizaciones muestran que todos los monocristales superconductores de YBa2Cu3O7-δ son de excelente calidad. Adicionalmente, se obtuvo una muestra de la composición de CaLaBaCu3O7-δ con buenas propiedades morfolóficas, lo cual evidenció crecimiento orientado en los planos (h k 0.

Deep physical structure and geotectonic implications of the eastern margin of the Qinghai–Tibet Plateau

Directory of Open Access Journals (Sweden)

Jun Li

2016-10-01

eastern margin may contain a middle–lower crustal fluid material with the attributes of high conductivity and low density. Its distribution is closely related to the uplift mechanism and deep seismogenic activities at the QTP’s eastern margin.   Estructura profunda e implicaciones geotectónicas del margen oriental del altiplano Qinghai-Tíbet  Resumen El margen oriental del altiplano Qinghai-Tíbet (QTP, del inglés Qinghai-Tibet Plateau es el área de la extrusión lateral hacia el Este de material cortical. Este trabajo se enfoca en explorar la respuesta estructural de las capas superiores en el altiplano y las bases para su estructuración geológica. Se utilizó información magnetotelúrica y anomalías de Bouguer para determinar la respuesta geofísica de las capas superiores en el margen occidental del altiplano. Dentro de los principales resultados se tiene: (i la distribución de la densidad aparente indica la presencia de material de baja densidad en las capas medias y bajas de los bloques Songpan y Sichuan-Yunnan en el Este del QTP. Por otro lado, el bloque cratónico Yangtze (en la cuenca Sichuan contiene material con una mayor densidad. Al oeste de las zonas tectónicas Longmeshan-Panxi, y a lo largo de las capas inferiores, entre 40 y 50 kilómetros de profundidad, hay una zona de baja densidad con orientación noreste-suroeste. (ii El modelo eléctrico que abarca el bloque Songpan, la zona tectónica Longmeshan y el bloque Yangtze, revela tres unidades a lo largo de la sección cruzada subordinada a la zona tectónica Longmenshan. La primera unidad está en el bloque Songpan, con alta resistividad en la capa superficial y baja en las capas media e inferiores. Luego aparece el cratón Yangtze, con baja resistividad en la superficie y resistividad media en las capas media e inferiores. La tercera unidad es la zona tectónica transicional de Longmenshan, cuya estructura superficial y profunda está caracterizada por una estructura eléctrica asociada

Insulator contamination effects; Efectos de la contaminacion en aislamientos

Energy Technology Data Exchange (ETDEWEB)

Gonzalez, Lucia [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1987-12-31

Environmental contamination deteriorates the electric insulators, mechanically as well as electrically; the mechanical problems caused by contamination are related basically with materials corrosion and degradation and the electrical problems are related to the deterioration of their dielectric rigidity. From the electrical standpoint, the type of contamination that cause more problems are divided into: marine, desert and industrial. It is not uncommon to find various combinations of these types of contamination. When the electric installations operate in polluted environments, the insulator electric behavior deteriorates, provoking increments in the operation costs for maintenance as well as for replacement. Mexico has large extensions of coasts (marine contamination), where nowadays large cities and productions centers are developed (industrial pollution); also, in some cases for the energy transportation is necessary to go through large land extensions, where no vegetation of any kind exists. For this reason the contamination effect on the electric installations must be considered in order to obtain a reliable and economical energy supply. [Espanol] La contaminacion ambiental deteriora los aisladores electricos tanto mecanica como electricamente; los problemas mecanicos por contaminacion se relacionan en forma basica con la corrosion y degradacion de los materiales, y los electricos se vinculan con el deterioro de su rigidez dielectrica. Desde el punto de vista electrico, los tipos de contaminacion que mas problemas ocasionan se dividen en: marina, desertica e industrial. Es comun encontrar diversas combinaciones de estas. Cuando las instalaciones electricas operan en ambientes contaminados, el comportamiento electrico de los aisladores se deteriora, provocando incrementos en los costos de operacion, tanto por mantenimiento como por reposicion. Mexico cuenta con grandes extensiones de costas (contaminacion marina), donde actualmente se desarrollan ciudades y

The photovoltaic services network: A renewable energy partnership

Energy Technology Data Exchange (ETDEWEB)

Plate, Peggy [Western Area Power Administration, (United states); Stokes, Kirk [NEOS Corporation, (United states)

1995-12-31

The Photovoltaic Services Network (PSN) is an independent organization of electric utilities established to support utility members in the use of photovoltaic (PV) power for off-grid applications. The PSN is focused on ensuring that cost-competitive, utility-grade, packaged PV products are available for various off-grid applications, such as livestock water pumping, remote residences, lighting, and cathodic protection among others. The primary objectives of the PSN are: 1) To provide education, training, and installation support as required by member utilities. 2) To establish a forum for member utilities to exchange ideas on PV program implementation and marketing strategies. 3) To create standardized system specifications for a variety of PV applications. 4) To coordinate PV product purchases for appropriate applications. 5) To identify and acquire additional funding (both publics and private) for product development and testing. 6) To pursue alliances with other organizations interested in PV. [Espanol] La Red de Servicios Fotovoltaicos (PSN) es una organizacion independiente de empresas electricas establecida para apoyar a las empresas miembro en el uso de la energia fotovoltaica en aplicaciones fuera de la red. La PSN se enfoca en garantizar que la competitividad en costo, calidad de empresa electrica de los paquetes de productos fotovoltaicos esten disponibles para varias aplicaciones fuera de la red, tales como el bombeo de agua para el ganado, residencias remotas, iluminacion y proteccion catodica entre otras. Los principales objetivos del PSN son: 1. Proporcionar educacion, entrenamiento, y apoyo en la instalacion requerida por las empresas miembro. 2. Establecer un forum de empresas miembro para intercambiar ideas sobre la puesta en practica del programa fotovoltaico y sobre la estrategias de comercializacion. 3. Crear un sistema de especificaciones estandarizadas para una variedad de aplicaciones de la energia fotovoltaica. 4. Coordinar la compra de

Development and implementation of an interface control-process and of additional models in the simulator of combined cycle units; Desarrollo e implantacion de una interfaz control-proceso y de modelos adicionales en el simulador de unidades de ciclo combinado

Energy Technology Data Exchange (ETDEWEB)

Martinez R, Rogelio E; Ramirez G, Miguel; Melgar G, Jose L; Codero C, Juan C; Romero J, Guillermo [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2001-07-01

In this article are described the design and implementation of an interface control-process and the formulation of the process models for the simulation of the vibration amplitudes of the steam and gas turbines and of the monitoring system of gas discharges, which comprise a simulator of total reach of combined cycle units. These three systems had to be developed and implemented in the simulator of combined cycle units, that the Instituto de Investigaciones Electricas (IIE) developed for the Comision Federal de Electricidad (CFE), with the purpose of solving different problematic caused by the use of a platform of commercial software for the construction of simulators. The problematic presented by the platform of software is briefly described, as well as the solutions contributed with respect to the interconnection of signals control-process, and to the lack of models of the mechanical part of the steam and gas turbines, and of the monitoring system of polluting emissions. [Spanish] En este articulo se describen el diseno e implantacion de una interfaz control-proceso y la formulacion de los modelos de proceso para la simulacion de las amplitudes de vibracion de las turbinas de gas y de vapor y del sistema de monitoreo de emisiones de gases, los cuales forman parte de un simulador de alcance total de unidades de ciclo combinado. Estos tres sistemas tuvieron que ser desarrollados e implementados en el simulador de unidades de ciclo combinado, que el Instituto de Investigaciones electricas (IIE) desarrollo para la Comision Federal de Electricidad (CFE), con el fin de resolver diferentes problematicas ocasionadas por la utilizacion de una plataforma de software comercial para la construccion de simuladores. Se describen brevemente las problematicas presentadas por la plataforma de software, asi como las soluciones aportadas en lo relativo a la interconexion de senales control-proceso, y a la falta de modelos de la parte mecanica de las turbinas de gas y de vapor, y

Computerized system for energy diagnosis in domestic users; Sistema computarizado para diagnostico energetico en usuarios domesticos

Energy Technology Data Exchange (ETDEWEB)

Ramos N, Gaudencio; Heard, Cristopher; Fiscal E, Raul; Maqueda Z, Martin [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

1999-07-01

The scope of a computerized system is presented to make an energy diagnosis to homes and a simulation of scenarios of cost/benefit, due to the implementation of energy saving measures and the efficient use of electrical energy. The FIPATERM (trust for the heat insulation of the house in Mexicali), provides economic and technical support so that the domestic users diminish their expense for the electrical energy, implementing programs of Demand Side Management (DSM). The current effective programs are: thermal insulation, substitution of the existent air conditioning units for efficient ones, reduction of infiltration, leveled plan of payments, interruption of the air conditioning equipment. In order to participate in one or several of the programs of energy efficiency, an energy diagnosis is made to the user. It is from a survey of the equipment and characteristics of the house, as well as a description on the part of the user of his habits of use of the equipment, that scenarios are simulated, which allow the user to identify the most profitable measures. [Spanish] Se presenta el alcance de un sistema computarizado para realizar diagnostico energetico a casas habitacion y simulacion de escenarios de beneficio/costo, debido a la implantacion de medidas de ahorro y uso eficiente de energia electrica. El FIPATERM (fideicomiso para el aislamiento termico de la vivienda en Mexicali), proporciona apoyo economico y tecnico para que los usuarios domesticos minimicen su gasto de energia electrica, implementando programas de Administracion por el Lado de la Demanda (ALD). Los programas actualmente vigentes son: aislamiento termico, sustitucion del aire acondicionado actual por uno eficiente, reduccion de infiltracion, plan nivelado de pagos, interrupcion del equipo de aire acondicionado. Para participar en uno o varios de los programas de eficiencia energetica, al usuario se le realiza un diagnostico energetico. Es a partir de una encuesta del equipamiento y caracteristicas

Modernization of the subsystem man-machine interface for operation of the combined cycle central of Gomez Palacio; Modernizacion del subsistema de interfaz hombre-maquina para operacion de la central de ciclo combinado de Gomez Palacio

Energy Technology Data Exchange (ETDEWEB)

Rivas S, Alfonso; Uribe B, Carlos E; Alvarez C, Victor [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2002-07-01

In order to take care of the modernization of the Combined Cycle Central of Gomez Palacio (CCCGP) of the Comision Federal de Electricidad (CFE), the Instituto de Investigaciones Electricas (IIE), through the Management of Supervision of Processes (GSP) developed the subsystem of Interface Man-Machine (IMM), to replace the workstations that are deteriorated and obsolete by personal computers, maintaining the same functions of the IMM of the present system, including the management and processing functions that at the present time another system makes. Also, to replace the equipment of the concentrators of communications by a PC with greater capacity, than allows improving in general the flexibility and robustness of the system. Among the main functions integrated in the IMM subsystem there are: the communications master with the controllers (equipment SAC), redundancy of servers, database, historical registry storage, alarm management, tabulations, tendency graphs in real time and historical, process diagrams and Control Panels. [Spanish] Con el objeto de atender las necesidades de modernizacion de la Central de Ciclo Combinado Gomez Palacio (CCCGP) de la Comision Federal de Electricidad (CFE), el Instituto de Investigaciones Electricas (IIE), a traves de la Gerencia de Supervision de Procesos (GSP) desarrollo el subsistema de Interfaz Hmbre-Maquina (IHM), para reemplazar las estaciones de trabajo que se encuentran deterioradas y obsoletas por computadoras personales, manteniendo las mismas funciones de la IHM del sistema actual, incluyendo las funciones de administracion y procesamiento que en la actualidad realiza otro sistema. Asimismo, para reemplazar los equipos de los concentradores de comunicaciones por PC con mayor capacidad, que permitan mejorar la flexibilidad y robustez del sistema en general. Entre las principales funciones integradas en el subsistema de IHM se encuentran: el Maestro de comunicaciones con los controladores (equipo SAC), redundancia de

Information systems for civil engineering; Sistemas de informacion para ingenieria civil

Energy Technology Data Exchange (ETDEWEB)

De Buen R, Pablo R; Alvarado G, Alonso; Alaniz Q, Felipe de J; Guerrero F, Vicente A. [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2004-07-01

Since its beginnings, in the Gerencia de Ingenieria Civil (GIC) of the Instituto de Investigaciones Electricas (IIE) the interest has existed to take advantage of and to promote the advantages that the appropriate use of the computerizing systems in the different tasks of civil engineering in the power sector represent. Either as a part of its infrastructure or at the request of their clients, at the GIC have been developed calculation systems for the analysis and design of special structures such as turbo-generators foundations, poles for transmission and distribution and transmission towers, in addition the information systems for the consultation and the analysis of diverse information, such as the related to the Manuals of Civil Works of the Comision Federal de Electricidad (CFE) or the relative to the existing instruments in the large dams of our country. In this article are briefly described some of the computer systems developed by the GIC in recent years. [Spanish] Desde sus inicios, en la Gerencia de Ingenieria Civil (GIC) del Instituto de Investigaciones Electricas (IIE) ha existido el interes por aprovechar y promover las ventajas que representa el uso adecuado de los sistemas de computo en las diferentes tareas de ingenieria civil en el sector energetico. Ya sea como parte de su infraestructura o a solicitud de sus clientes, en la GIC se han desarrollado sistemas de calculo para el analisis y diseno de estructuras especiales como lo son las cimentaciones de turbogeneradores, los postes para transmision y distribucion y las torres de transmision, ademas de sistemas de informacion para la consulta y el analisis de informacion diversa, como es la relacionada con los manuales de obras civiles de la Comision Federal de Electricidad (CFE) o a la relativa a los instrumentos existentes en las grandes presas de nuestro pais. En este articulo se describen brevemente algunos de los sistemas de computo desarrollos por la GIC en anos recientes.

Construction and evaluation of a fuel cell prototype (proton exchange fuel cell); Construccion y evaluacion de un prototipo de celda a combustible (proton exchange fuel cell)

Energy Technology Data Exchange (ETDEWEB)

Da Silva, L. [Laboratorio de Pesquisa em Energia - LAPEN, Universidade do Vale do Itajai, São Jose, SC (Brasil)] e-mail: luciano.silva@univali.br; Paula, M.M.S.; Fiori, M [Lasicom, Universidade do Extremos Sul Catarinense (UNESC), Criciuma, S.C. (Brasil); Benavides, R. [Centro de Investigacion en Quimica Aplicada (CIQA), Saltillo, Coahuila (Mexico); Santos, V. [Laboratorio de Pesquisa em Energia - LAPEN, Universidade do Vale do Itajai, São Jose, SC (Brasil)

2009-09-15

Because electric energy is a vitally important material for the development of the country, this work is aimed at offering an alternative methodology for the construction and operational demonstration of a PEMFC fuel cell. Recently discovered natural gas reserves can be exploited using modern methods and its use fulfills generation, distribution and low environmental impact priorities. All these factors can be observed with the use of fuel cells, especially when working with reformed natural gas. In addition to its low environmental impact during the generation of this energy, the use of fuel cells reflects a generator source that can be located with the consumer, further reducing problems created by transmission lines, fuel transport, etc. Fuel cells are receiving a great deal of attention from the international community and some models are already commercially available. They are showing excellent possibilities for becoming one of the future technologies to generate electric energy with low environmental impact. [Spanish] En funcion de la necesidad de energia electrica como insumo de vital importancia para el desarrollo del pais, este trabajo pretende ofrecer una metodologia alternativa para la construccion y demostracion operacional de una celda a combustible del tipo PEMFC. La explotacion de las reservas de gas natural descubiertas recientemente puede realizarse a traves de metodos modernos y su uso tiene las prioridades de generacion, distribucion y bajo impacto ambiental. Todos estos aspectos se pueden observar dentro del uso de celdas a combustible, especialmente cuando se trabaja con gas natural reformado. Ademas del factor de bajo impacto ambiental durante la misma generacion de energia, el uso de las celdas a combustible involucra una fuente generadora, que puede colocarse junto al consumidor, reduciendo aun mas los problemas generados por las lineas de transmision, el transporte del combustible, etc. Las celdas a combustible estan recibiendo una gran

The photovoltaic services network: A renewable energy partnership

Energy Technology Data Exchange (ETDEWEB)

Plate, Peggy [Western Area Power Administration, (United states); Stokes, Kirk [NEOS Corporation, (United states)

1996-12-31

The Photovoltaic Services Network (PSN) is an independent organization of electric utilities established to support utility members in the use of photovoltaic (PV) power for off-grid applications. The PSN is focused on ensuring that cost-competitive, utility-grade, packaged PV products are available for various off-grid applications, such as livestock water pumping, remote residences, lighting, and cathodic protection among others. The primary objectives of the PSN are: 1) To provide education, training, and installation support as required by member utilities. 2) To establish a forum for member utilities to exchange ideas on PV program implementation and marketing strategies. 3) To create standardized system specifications for a variety of PV applications. 4) To coordinate PV product purchases for appropriate applications. 5) To identify and acquire additional funding (both publics and private) for product development and testing. 6) To pursue alliances with other organizations interested in PV. [Espanol] La Red de Servicios Fotovoltaicos (PSN) es una organizacion independiente de empresas electricas establecida para apoyar a las empresas miembro en el uso de la energia fotovoltaica en aplicaciones fuera de la red. La PSN se enfoca en garantizar que la competitividad en costo, calidad de empresa electrica de los paquetes de productos fotovoltaicos esten disponibles para varias aplicaciones fuera de la red, tales como el bombeo de agua para el ganado, residencias remotas, iluminacion y proteccion catodica entre otras. Los principales objetivos del PSN son: 1. Proporcionar educacion, entrenamiento, y apoyo en la instalacion requerida por las empresas miembro. 2. Establecer un forum de empresas miembro para intercambiar ideas sobre la puesta en practica del programa fotovoltaico y sobre la estrategias de comercializacion. 3. Crear un sistema de especificaciones estandarizadas para una variedad de aplicaciones de la energia fotovoltaica. 4. Coordinar la compra de

Insulator contamination effects; Efectos de la contaminacion en aislamientos

Energy Technology Data Exchange (ETDEWEB)

Gonzalez, Lucia [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1986-12-31

Environmental contamination deteriorates the electric insulators, mechanically as well as electrically; the mechanical problems caused by contamination are related basically with materials corrosion and degradation and the electrical problems are related to the deterioration of their dielectric rigidity. From the electrical standpoint, the type of contamination that cause more problems are divided into: marine, desert and industrial. It is not uncommon to find various combinations of these types of contamination. When the electric installations operate in polluted environments, the insulator electric behavior deteriorates, provoking increments in the operation costs for maintenance as well as for replacement. Mexico has large extensions of coasts (marine contamination), where nowadays large cities and productions centers are developed (industrial pollution); also, in some cases for the energy transportation is necessary to go through large land extensions, where no vegetation of any kind exists. For this reason the contamination effect on the electric installations must be considered in order to obtain a reliable and economical energy supply. [Espanol] La contaminacion ambiental deteriora los aisladores electricos tanto mecanica como electricamente; los problemas mecanicos por contaminacion se relacionan en forma basica con la corrosion y degradacion de los materiales, y los electricos se vinculan con el deterioro de su rigidez dielectrica. Desde el punto de vista electrico, los tipos de contaminacion que mas problemas ocasionan se dividen en: marina, desertica e industrial. Es comun encontrar diversas combinaciones de estas. Cuando las instalaciones electricas operan en ambientes contaminados, el comportamiento electrico de los aisladores se deteriora, provocando incrementos en los costos de operacion, tanto por mantenimiento como por reposicion. Mexico cuenta con grandes extensiones de costas (contaminacion marina), donde actualmente se desarrollan ciudades y

Current status of the second generation of parabolic trough solar concentrator for heat generation process designed at the IIE; Estado actual de la segunda generacion del concentrador solar de canal parabolico para generacion de calor de proceso disenado en el IIE

Energy Technology Data Exchange (ETDEWEB)

Ramos Berumen, Carlos; Ramirez Benitez, Juan Rafael; Beltran Adan, Jose [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)]. E-mail: cramos@iie.org.mx; rramirez@iie.org.mx; jose.beltran@iie.org.mx

2010-11-15

The transformation industry normally uses thermal energy within its process, it obtains this energy burning fossils fuel, a new option is to use new technologies like the thermal solar technology like the parabolic trough, this is a long parabolic mirror used to reflect the sunlight and focused on an absorber tube with a heat-conducting fluid inside. The Instituto de Investigaciones Electricas (IIE) developed a prototype of parabolic trough that is operating in different industries, in this article are showing some improvements to the design, giving like result the second generation of the prototype of parabolic trough of the IIE. [Spanish] La industria de la transformacion normalmente utiliza energia termica dentro de su proceso, los medios convencionales para obtener esta energia es el quemar combustibles fosiles, una opcion que aplica nuevas tecnologias es el uso de la tecnologia termosolar a concentracion que le permitira a la industria utilizar el sol como fuente de energia primaria. El uso de esta tecnologia permitira a las empresas generar calor de proceso sin contaminar el ambiente, lo que dara como resultado empresas competitivas y autosuficientes. Para alcanzar temperaturas utiles a estas aplicaciones se requiere concentrar la energia solar en un area mas pequena, siendo la tecnologia mas extendida la de canal parabolico, el principio de operacion de esta tecnologia es la de concentrar la radiacion solar en el eje receptor preparado con una pintura especial para una mejor absorcion del calor y una cubierta de vidrio para evitar perdidas termicas, dentro del tubo circula un fluido caloportador el cual lleva el calor util hacia el proceso. El Instituto de Investigaciones Electricas (IIE) desarrollo un prototipo de canal parabolico, actualmente estan operando en diferentes industrias, resultado de estas aplicaciones se llevo a cabo una evaluacion del prototipo, se detectaron algunos puntos de mejoras al diseno, los cuales se exponen en este articulo, dando

Modification of porosity in the catalyst layer of membrane electrode assemblies using pore-forming agents; Modificacion de la porosidad en la capa catalitica de ensambles membrana-electrodo empleando agentes formadores de poros

Energy Technology Data Exchange (ETDEWEB)

Flores Hernandez, J. Roberto [Instituto de Investigaciones Electricas Cuernavaca, Morelos (Mexico)] e-mail: jrflores@iie.org.mx; Reyes, Brenda [UNAM. Facultad de Quimica, Mexico D.F. (Mexico); Barbosa P., Romeli [Centro de Investigacion en Energia, UNAM, Temixco, Morelos (Mexico); Cano Castillo, Ulises; Albarran, Lorena [Instituto de Investigaciones Electricas Cuernavaca, Morelos (Mexico)

2009-09-15

Membrane electrode assemblies (MEA) are the most important part of PEM fuel cells since their interface results in the electrochemical reactions that make the generation of electricity possible. The MEA is composed of a proton exchange membrane, both sides of which are impregnated with a catalyst layer, normally of carbon-supported platinum. Depending on the technique used for its fabrication (atomization, serigraphy, brush methods, chemical reduction, etc.), the properties of the MEA can be different in terms of porosity, distribution of the catalyst, thickness and structure of the catalyst layer, and the quality of the union between the catalyst layer and the membrane, etc. Currently, the porosity of the electrodes is generated by isopropanol evaporation (solvent used in the dye) during the fabrication process conducted in the Instituto de Investigaciones Electricas (IIE). This document presents the results obtained from adding a porous agent to the catalytic dye base composition used in the fabrication of MEA at the IIE. [Spanish] Los Ensambles Membrana-Electrodo (MEA's) son la parte mas importante en las celdas de combustibles tipo PEM, ya que en su interfaz se llevan a cabo las reacciones electroquimicas que hacen posible la generacion de electricidad. El MEA esta compuesto de una membrana de intercambio protonico a la cual se le impregna en ambos lados una capa catalitica normalmente de platino soportado en carbon. Dependiendo de la tecnica empleada en su fabricacion (atomizado, serigrafia, brocha, reduccion quimica, etc.), las propiedades del MEA pueden ser diferentes en cuanto a porosidad, distribucion del catalizador, grosor y estructura de la capa catalitica, asi como la calidad de la union entre la capa catalizadora y la membrana, etc. Actualmente, la porosidad de los electrodos es generada por la evaporacion del isopropanol (solvente utilizado en la tinta) durante el proceso de fabricacion que se realiza en el Instituto de Investigaciones

Intelligent tutorial system for selftraining in tuning of control systems; Sistema tutorial inteligente para el autoentrenamiento en sintonizacion de sistemas de control

Energy Technology Data Exchange (ETDEWEB)

Romero Jimenez, Guillermo; Perez Ocampo, Maria Concepcion [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

1999-07-01

In this paper the design, development and validation of an intelligent tutorial system oriented to the instruction of techniques of tuning of control systems is described. This system is based on systems previously developed in the Simulation Unit of the Instituto de Investigaciones Electricas (IIE). The designed system accounts with four modules: of knowledge, the student model, of tutor and of interface, basic characteristics that allows to locate this system in the context of the intelligent tutorial systems. In this system in particular, the knowledge module was only modified, because advantage is taken of the existing structure to incorporate a new dominion of application: the one of the techniques of tuning of control systems. The system maintains the characteristic that it can also be used as a consultation system. In addition to the design and validation of the tutorial system, when following the methodology of processing the degree of generality of the developed system, was evaluated, taking into account the evaluation and quantification of metrics that the engineering software proposes. [Spanish] En este trabajo se describen el diseno, el desarrollo y la validacion de un sistema tutorial inteligente orientado a la instruccion de tecnicas de sintonizacion de sistemas de control. Este sistema esta basado en sistemas desarrollados anteriormente en la Unidad de Simulacion del Instituto de Investigaciones Electricas (IIE). El sistema disenado cuenta con cuatro modulos: de conocimiento, del modelo del estudiante, de tutor y de interfaz, caracteristica principal que permite ubicar a este sistema en el contexto de los sistemas tutoriales inteligentes. En este sistema en particular solo se modifica el modulo de conocimiento, pues se aprovecha la estructura existente para incorporar un nuevo dominio de aplicacion: el de las tecnicas de sintonizacion de sistemas de control. El sistema mantiene la caracteristica de que tambien puede utilizarse como un sistema de

Development of procedures for spectrometer brand Spectral Products to capture spectra of incoherent optical radiation for the Laboratorio de Fotonica y Tecnologia Laser Aplicada

International Nuclear Information System (INIS)

Arias Avendano, Fabio Andres

2008-01-01

The procedure to capture spectra of incoherent optical radiation for the Laboratorio de Fotonica y Tecnologia Laser Aplicada (LAFTLA), of the Escuela de Ingenieria Electrica de la Universidad de Costa Rica is developed through the use of a spectrometer brand Spectral Products. The thorough understanding of manuals spectrometer brand Spectral Products was necessary for the satisfactory development of the project. Spectrometer and the card National Instruments are installed and run both devices with a montage of suitable laboratory. Two catches of spectrum for two different sources of optical radiation are performanced, since damages to the files .ddl precluded that the SM 240 spectrometer worked properly to take more catches to other sources of optical radiation. A final report containing the two catches is produced with the respective analysis. (author) [es

I and C upgrades resulting from the systematic evaluation program carried out at the Central Nuclear Jose Cabrera

International Nuclear Information System (INIS)

Humphrey, J.C.

1985-01-01

Central Nuclear Jose Cabrera, also known as Zorita, is a 160 MWe nuclear power plant owned and operated by UNION ELECTRICA-FENOSA, S.A. The plant was supplied by Westinghouse Electric Corporation and commissioned in 1968. It features a unique one loop Pressurized Water Reactor design. The Spanish Licensing Authorities requested C.N. Jose Cabrera to carry out a review of their plant. The main objectives were to reassess the safety adequacy of the operating systems, provide a documented comparison of the plant design versus present day criteria and establish a rationale for departures. Another important objective was to provide prompt identification of any significant deficiency. The review known as phase 1 of the C.N. Jose Cabrera Systematic Evaluation Program, was completed and documented by April 1980

Tapping Mexico's experience for a restructured market such as that of El Salvador

International Nuclear Information System (INIS)

Urteaga, Jose Antonio

1999-01-01

In this paper, the strategy applied in Mexico to promote electric power savings within the principal consumer sector of this resource is raised. Special emphasis is placed on the newly developed programs by the Fideicomiso para el Ahorro de Energia Electrica (FIDE). The fundamental purpose has been to eliminate the barriers that hinder the transformation of the equipment, services and financing markets to energy efficiency, in commercial conditions that are developed based on the profitability of these projects that are being developed by the principal participating agents in this field. Finally, reference is made to the scope of the current FIDE project, contracted to the Rio Lempa Hydropower Commission of El Salvador, whose goal is to design a National Energy Efficiency Program and is the agency responsible for its implementation. (The author)