The Key Driving Forces for Geo-Economic Relationships between China and ASEAN Countries

Directory of Open Access Journals (Sweden)

Shufang Wang

2017-12-01

Full Text Available With the rise of China and the implementation of the “21st Century Maritime Silk Road” strategy, research on geo-economics between China and ASEAN (Association of Southeast Asian Nations countries has become increasingly important. Current studies mainly focus on influencing factors, while there is little consideration about how these influencing factors act on geo-economic relationships. Therefore, this paper explores the key driving forces for geo-economic relationships between China and ASEAN countries by use of the structural equation modeling based on Partial Lease Squares. There are three main findings: (1 Economic factors have the greatest impact on geo-economic relationships and the total path effect is 0.778. Geo-location, geopolitics and geo-culture act on geo-economic relationships directly and indirectly. Their total path effects are 0.731, 0.645 and 0.513, respectively. (2 Indirect effects of geo-location, geopolitics and geo-culture impacting geo-economic relationships are far greater than direct effects. Geo-culture, in particular, has a vital mediating effect on geo-economic relationships. (3 Economic drivers promote geo-economic relationships through market, industrial policy, technical, network and benefit-sharing mechanisms. Political drivers improve geo-economic relationships through cooperation, negotiation, coordination and institutional mechanisms. Cultural drivers enhance geo-economic relationships through transmission mechanism. Location drivers facilitate geo-economic relationships through selection mechanism. We provide new insights on the geo-economic relationships through quantitative analysis and enrich the existing literature by revealing the key driving forces and mechanisms for geo-economic relationships.

Towards Autonomous Modular UAV Missions: The Detection, Geo-Location and Landing Paradigm

Science.gov (United States)

Kyristsis, Sarantis; Antonopoulos, Angelos; Chanialakis, Theofilos; Stefanakis, Emmanouel; Linardos, Christos; Tripolitsiotis, Achilles; Partsinevelos, Panagiotis

2016-01-01

Nowadays, various unmanned aerial vehicle (UAV) applications become increasingly demanding since they require real-time, autonomous and intelligent functions. Towards this end, in the present study, a fully autonomous UAV scenario is implemented, including the tasks of area scanning, target recognition, geo-location, monitoring, following and finally landing on a high speed moving platform. The underlying methodology includes AprilTag target identification through Graphics Processing Unit (GPU) parallelized processing, image processing and several optimized locations and approach algorithms employing gimbal movement, Global Navigation Satellite System (GNSS) readings and UAV navigation. For the experimentation, a commercial and a custom made quad-copter prototype were used, portraying a high and a low-computational embedded platform alternative. Among the successful targeting and follow procedures, it is shown that the landing approach can be successfully performed even under high platform speeds. PMID:27827883

Formulation of caesium based and caesium containing geo-polymers

Energy Technology Data Exchange (ETDEWEB)

Berger, S.; Joussot-Dubien, C.; Frizon, F. [CEA Valrho, Dir. de l' Energie Nucleaire, DEN, Decontamination and Conditioning Department, DEN/DTCD/SPDE/L2ED, 30 - Marcoule (France)

2009-10-15

Cement encapsulation is widely used as a low- and intermediate level radioactive waste immobilisation process. Among these wastes, caesium ions are poorly immobilised by Portland cement based materials. This work consists of an experimental investigation into the ability of geo-polymers to effectively encapsulate this chemical species and to determine the impact of caesium incorporation on the geo-polymer properties. Geo-polymers were synthesised with several compositions based on the activation of metakaolin with an alkali hydroxide solution containing caesium. The setting time, mineralogy, porosity and mechanical properties of the samples were examined for one month. Leach tests were conducted during the same period to determine the immobilisation efficiency. The results depend to a large extent on the composition of the activation solution in terms of soluble silica content and alkali used. These parameters determine both the degree of condensation and the geo-polymer composition. (authors)

Formulation of caesium based and caesium containing geo-polymers

International Nuclear Information System (INIS)

Berger, S.; Joussot-Dubien, C.; Frizon, F.

2009-01-01

Cement encapsulation is widely used as a low- and intermediate level radioactive waste immobilisation process. Among these wastes, caesium ions are poorly immobilised by Portland cement based materials. This work consists of an experimental investigation into the ability of geo-polymers to effectively encapsulate this chemical species and to determine the impact of caesium incorporation on the geo-polymer properties. Geo-polymers were synthesised with several compositions based on the activation of metakaolin with an alkali hydroxide solution containing caesium. The setting time, mineralogy, porosity and mechanical properties of the samples were examined for one month. Leach tests were conducted during the same period to determine the immobilisation efficiency. The results depend to a large extent on the composition of the activation solution in terms of soluble silica content and alkali used. These parameters determine both the degree of condensation and the geo-polymer composition. (authors)

Providing a USSD location based clinic finder in South Africa: did it work?

Science.gov (United States)

Parsons, Annie Neo; Timler, Dagmar

2014-01-01

A new mHealth service, Clinic Finder, was designed to provide a location-based service for any cellphone user in South Africa dialing a dedicated USSD string to find the nearest public primary health care facility. The service was funded by a European Union grant to Cell-Life to support the National Department of Health. Clinic Finder's aims were to provide a reliable and accurate service, and to assess both the most effective means of advertising the service as well as interest in the service. Users dialing the USSD string are asked to agree to geo-location (Vodacom and MTN users) or asked to enter their province, town and street (virtual network users and those choosing not to geo-locate). The service provider, AAT, sends the data to Cell-Life where an SMS with details of the nearest public primary health care facility is sent to the user by Cell-Life's open-source Communicate platform. The service was advertised on 3 days in 2014 using two different means: a newspaper ad on 20 May 2014 and Please Call Me ads on 30 July 2014 and 14 August 2014. 28.2% of unique users on 20 May 2014, 10.5% of unique users on 30 July 2014 and 92.8% of unique users on 14 August 2014 who agreed to geo-location successfully received SMSs. However, only 4.2%, 0.5%, and 2.4% of unique users responding to each advertisement who did not geo-locate then received an SMS. A small survey of users following the 20 May 2014 newspaper ad found overall interest in the idea of Clinic Finder, though unsuccessful users were more likely to dislike the service. The overall experience of using location based services and USSD for Clinic Finder suggests a need in the field of mHealth for wider availability of data on service usability and effectiveness.

Geo-Located Tweets. Enhancing Mobility Maps and Capturing Cross-Border Movement.

Science.gov (United States)

Blanford, Justine I; Huang, Zhuojie; Savelyev, Alexander; MacEachren, Alan M

2015-01-01

Capturing human movement patterns across political borders is difficult and this difficulty highlights the need to investigate alternative data streams. With the advent of smart phones and the ability to attach accurate coordinates to Twitter messages, users leave a geographic digital footprint of their movement when posting tweets. In this study we analyzed 10 months of geo-located tweets for Kenya and were able to capture movement of people at different temporal (daily to periodic) and spatial (local, national to international) scales. We were also able to capture both long and short distances travelled, highlighting regional connections and cross-border movement between Kenya and the surrounding countries. The findings from this study has broad implications for studying movement patterns and mapping inter/intra-region movement dynamics.

Research on geo-ontology construction based on spatial affairs

Science.gov (United States)

Li, Bin; Liu, Jiping; Shi, Lihong

2008-12-01

Geo-ontology, a kind of domain ontology, is used to make the knowledge, information and data of concerned geographical science in the abstract to form a series of single object or entity with common cognition. These single object or entity can compose a specific system in some certain way and can be disposed on conception and given specific definition at the same time. Ultimately, these above-mentioned worked results can be expressed in some manners of formalization. The main aim of constructing geo-ontology is to get the knowledge of the domain of geography, and provide the commonly approbatory vocabularies in the domain, as well as give the definite definition about these geographical vocabularies and mutual relations between them in the mode of formalization at different hiberarchy. Consequently, the modeling tool of conception model of describing geographic Information System at the hiberarchy of semantic meaning and knowledge can be provided to solve the semantic conception of information exchange in geographical space and make them possess the comparatively possible characters of accuracy, maturity and universality, etc. In fact, some experiments have been made to validate geo-ontology. During the course of studying, Geo-ontology oriented to flood can be described and constructed by making the method based on geo-spatial affairs to serve the governmental departments at all levels to deal with flood. Thereinto, intelligent retrieve and service based on geoontology of disaster are main functions known from the traditional manner by using keywords. For instance, the function of dealing with disaster information based on geo-ontology can be provided when a supposed flood happened in a certain city. The correlative officers can input some words, such as "city name, flood", which have been realized semantic label, to get the information they needed when they browse different websites. The information, including basic geographical information and flood distributing

Geo-Located Tweets. Enhancing Mobility Maps and Capturing Cross-Border Movement

Science.gov (United States)

Blanford, Justine I.; Huang, Zhuojie; Savelyev, Alexander; MacEachren, Alan M.

2015-01-01

Capturing human movement patterns across political borders is difficult and this difficulty highlights the need to investigate alternative data streams. With the advent of smart phones and the ability to attach accurate coordinates to Twitter messages, users leave a geographic digital footprint of their movement when posting tweets. In this study we analyzed 10 months of geo-located tweets for Kenya and were able to capture movement of people at different temporal (daily to periodic) and spatial (local, national to international) scales. We were also able to capture both long and short distances travelled, highlighting regional connections and cross-border movement between Kenya and the surrounding countries. The findings from this study has broad implications for studying movement patterns and mapping inter/intra-region movement dynamics. PMID:26086772

Geo-Located Tweets. Enhancing Mobility Maps and Capturing Cross-Border Movement.

Directory of Open Access Journals (Sweden)

Justine I Blanford

Full Text Available Capturing human movement patterns across political borders is difficult and this difficulty highlights the need to investigate alternative data streams. With the advent of smart phones and the ability to attach accurate coordinates to Twitter messages, users leave a geographic digital footprint of their movement when posting tweets. In this study we analyzed 10 months of geo-located tweets for Kenya and were able to capture movement of people at different temporal (daily to periodic and spatial (local, national to international scales. We were also able to capture both long and short distances travelled, highlighting regional connections and cross-border movement between Kenya and the surrounding countries. The findings from this study has broad implications for studying movement patterns and mapping inter/intra-region movement dynamics.

Framework for near-field-communication-based geo-localization and personalization for Android-based smartphones--application in hospital environments.

Science.gov (United States)

Meng, Philipp; Fehre, Karsten; Rappelsberger, Andrea; Adlassnig, Klaus-Peter

2014-01-01

Various applications using near field communication (NFC) have been developed for the medical sector. As a method of short-range wireless contact-driven data transfer, NFC is a useful tool in medicine. It can be used to transfer data such as blood pressure, control adherence to medication, or transmit in vivo data. The first proposed general framework uses NFC as a mechanism for indoor geo-localization in hospitals. NFC geo-localization is economical compared to classical concepts using indoor GPS or WLAN triangulation, and the granularity of location retrieval can be defined at a tag level. Using this framework, we facilitate the development of medical applications that require exact indoor geo-localization. Multi-user Android systems are addressed in the second framework. Using private NFC tags, users are able to carry on their personal settings for enabled applications. This eliminates the need for multiple user accounts on common Android devices, improves usability, and eases technical administration. Based on the prototypes presented here, we show a novel concept of using NFC-enabled Android devices in hospital environments.

Geo-communication and web-based geospatial infrastructure

DEFF Research Database (Denmark)

Brodersen, Lars; Nielsen, Anders

2005-01-01

The introduction of web-services as index-portals based on geoinformation has changed the conditions for both content and form of geocommunication. A high number of players and interactions (as well as a very high number of all kinds of information and combinations of these) characterize web-services......, where maps are only a part of the whole. These new conditions demand new ways of modelling the processes leading to geo-communication. One new aspect is the fact that the service providers have become a part of the geo-communication process with influence on the content. Another aspect...

Geo-Spotting: Mining Online Location-based Services for Optimal Retail Store Placement

OpenAIRE

Karamshuk, Dmytro; Noulas, Anastasios; Scellato, Salvatore; Nicosia, Vincenzo; Mascolo, Cecilia

2013-01-01

The problem of identifying the optimal location for a new retail store has been the focus of past research, especially in the field of land economy, due to its importance in the success of a business. Traditional approaches to the problem have factored in demographics, revenue and aggregated human flow statistics from nearby or remote areas. However, the acquisition of relevant data is usually expensive. With the growth of location-based social networks, fine grained data describing user mobi...

Analyzing Forest Inventory Data from Geo-Located Photographs

Science.gov (United States)

Toivanen, Timo; Tergujeff, Renne; Andersson, Kaj; Molinier, Matthieu; Häme, Tuomas

2015-04-01

Forests are widely monitored using a variety of remote sensing data and techniques. Remote sensing offers benefits compared to traditional in-situ forest inventories made by experts. One of the main benefits is that the number of ground reference plots can be significantly reduced. Remote sensing of forests can provide reduced costs and time requirement compared to full forest inventories. The availability of ground reference data has been a bottleneck in remote sensing analysis over wide forested areas, as the acquisition of this data is an expensive and slow process. In this paper we present a tool for estimating forest inventory data from geo-located photographs. The tool can be used to estimate in-situ forest inventory data including estimated biomass, tree species, tree height and diameter. The collected in-situ forest measurements can be utilized as a ground reference material for spaceborne or airborne remote sensing data analysis. The GPS based location information with measured forest data makes it possible to introduce measurements easily as in-situ reference data. The central projection geometry of digital photographs allows the use of the relascope principle [1] to measure the basal area of stems per area unit, a variable very closely associated with tree biomass. Relascope is applied all over the world for forest inventory. Experiments with independent ground reference data have shown that in-situ data analysed from photographs can be utilised as reference data for satellite image analysis. The concept was validated by comparing mobile measurements with 54 independent ground reference plots from the Hyytiälä forest research station in Finland [2]. Citizen scientists could provide the manpower for analysing photographs from forests on a global level and support researchers working on tasks related to forests. This low-cost solution can also increase the coverage of forest management plans, particularly in regions where possibilities to invest on

Real Time Adaptive Stream-oriented Geo-data Filtering

Directory of Open Access Journals (Sweden)

A. A. Golovkov

2016-01-01

Full Text Available The cutting-edge engineering maintenance software systems of various objects are aimed at processing of geo-location data coming from the employees’ mobile devices in real time. To reduce the amount of transmitted data such systems, usually, use various filtration methods of geo-coordinates recorded directly on mobile devices.The paper identifies the reasons for errors of geo-data coming from different sources, and proposes an adaptive dynamic method to filter geo-location data. Compared with the static method previously described in the literature [1] the approach offers to align adaptively the filtering threshold with changing characteristics of coordinates from many sources of geo-location data.To evaluate the efficiency of the developed filter method have been involved about 400 thousand points, representing motion paths of different type (on foot, by car and high-speed train and parking (indoors, outdoors, near high-rise buildings to take data from different mobile devices. Analysis of results has shown that the benefits of the proposed method are the more precise location of long parking (up to 6 hours and coordinates when user is in motion, the capability to provide steam-oriented filtering of data from different sources that allows to use the approach in geo-information systems, providing continuous monitoring of the location in streamoriented data processing in real time. The disadvantage is a little bit more computational complexity and increasing amount of points of the final track as compared to other filtration techniques.In general, the developed approach enables a significant quality improvement of displayed paths of moving mobile objects.

Rural and remote dental services shortages: filling the gaps through geo-spatial analysis evidence-based targeting.

Science.gov (United States)

Shiika, Yulia; Kruger, Estie; Tennant, Marc

Australia has a significant mal-distribution of its limited dental workforce. Outside the major capital cities, the distribution of accessible dental care is at best patchy. This study applied geo-spatial analysis technology to locate gaps in dental service accessibility for rural and remote dwelling Australians, in order to test the hypothesis that there are a few key location points in Australia where further dental services could make a significant contribution to ameliorating the immediate shortage crisis. A total of 2,086 dental practices were located in country areas, covering a combined catchment area of 1.84 million square kilometers, based on 50 km catchment zones around each clinic. Geo-spatial analysis technology was used to identify gaps in the accessibility of dental services for rural and remote dwelling Australians. An extraction of data was obtained to analyse the integrated geographically-aligned database. Results: Resolution of the lack of dental practices for 74 townships (of greater than 500 residents) across Australia could potentially address access for 104,000 people. An examination of the socio-economic mix found that the majority of the dental practices (84%) are located in areas classified as less disadvantaged. Output from the study provided a cohesive national map that has identified locations that could have health improvement via the targeting of dental services to that location. The study identified potential location sites for dental clinics, to address the current inequity in accessing dental services in rural and remote Australia.

Mechanism design for mobile geo-location advertising

OpenAIRE

Gatti, Nicola; Rocco, Marco; Ceppi, Sofia; Gerding, Enrico H.

2014-01-01

Mobile geo–location advertising, where mobile ads are targeted based on a user’s location, has been identified as a key growth factor for the mobile market. As with online advertising, a crucial ingredient for their success is the development of effective economic mechanisms. An important difference is that mobile ads are shown sequentially over time and information about the user can be learned based on their movements. Furthermore, ads need to be shown selectively to prevent ad fatigue. To ...

OntoFire: an ontology-based geo-portal for wildfires

Science.gov (United States)

Kalabokidis, K.; Athanasis, N.; Vaitis, M.

2011-12-01

With the proliferation of the geospatial technologies on the Internet, the role of geo-portals (i.e. gateways to Spatial Data Infrastructures) in the area of wildfires management emerges. However, keyword-based techniques often frustrate users when looking for data of interest in geo-portal environments, while little attention has been paid to shift from the conventional keyword-based to navigation-based mechanisms. The presented OntoFire system is an ontology-based geo-portal about wildfires. Through the proposed navigation mechanisms, the relationships between the data can be discovered, which would otherwise not be possible when using conventional querying techniques alone. End users can use the browsing interface to find resources of interest by using the navigation mechanisms provided. Data providers can use the publishing interface to submit new metadata, modify metadata or removing metadata in/from the catalogue. The proposed approach can improve the discovery of valuable information that is necessary to set priorities for disaster mitigation and prevention strategies. OntoFire aspires to be a focal point of integration and management of a very large amount of information, contributing in this way to the dissemination of knowledge and to the preparedness of the operational stakeholders.

Connecting Music and Place: Exploring Library Collection Data Using Geo-visualizations

Directory of Open Access Journals (Sweden)

Carolyn Doi

2017-06-01

Full Text Available Abstract Objectives – This project had two stated objectives: 1 to compare the location and concentration of Saskatchewan-based large ensembles (bands, orchestras, choirs within the province, with the intention to draw conclusions about the history of community-based musical activity within the province; and 2 to enable location-based browsing of Saskatchewan music materials through an interactive search interface. Methods – Data was harvested from MARC metadata found in the library catalogue for a special collection of Saskatchewan music at the University of Saskatchewan. Microsoft Excel and OpenRefine were used to screen, clean, and enhance the dataset. Data was imported into ArcGIS software, where it was plotted using a geo-visualization showing location and concentrations of musical activity by large ensembles within the province. The geo-visualization also allows users to filter results based on the ensemble type (band, orchestra, or choir. Results – The geo-visualization shows that albums from large community ensembles appear across the province, in cities and towns of all sizes. The ensembles are concentrated in the southern portion of the province and there is a correlation between population density and ensemble location. Choral ensembles are more prevalent than bands and orchestras, and appear more widely across the province, whereas bands and orchestras are concentrated around larger centres. Conclusions – Library catalogue data contains unique information for research based on special collections, though additional cleaning is needed. Using geospatial visualizations to navigate collections allows for more intuitive searching by location, and allow users to compare facets. While not appropriate for all kinds of searching, maps are useful for browsing and for location-based searches. Information is displayed in a visual way that allows users to explore and connect with other platforms for more information.

Recommender systems for location-based social networks

CERN Document Server

Symeonidis, Panagiotis; Manolopoulos, Yannis

2014-01-01

Online social networks collect information from users' social contacts and their daily interactions (co-tagging of photos, co-rating of products etc.) to provide them with recommendations of new products or friends. Lately, technological progressions in mobile devices (i.e. smart phones) enabled the incorporation of geo-location data in the traditional web-based online social networks, bringing the new era of Social and Mobile Web. The goal of this book is to bring together important research in a new family of recommender systems aimed at serving Location-based Social Networks (LBSNs). The chapters introduce a wide variety of recent approaches, from the most basic to the state-of-the-art, for providing recommendations in LBSNs. The book is organized into three parts. Part 1 provides introductory material on recommender systems, online social networks and LBSNs. Part 2 presents a wide variety of recommendation algorithms, ranging from basic to cutting edge, as well as a comparison of the characteristics of t...

Location Privacy with Randomness Consistency

Directory of Open Access Journals (Sweden)

Wu Hao

2016-10-01

Full Text Available Location-Based Social Network (LBSN applications that support geo-location-based posting and queries to provide location-relevant information to mobile users are increasingly popular, but pose a location-privacy risk to posts. We investigated existing LBSNs and location privacy mechanisms, and found a powerful potential attack that can accurately locate users with relatively few queries, even when location data is well secured and location noise is applied. Our technique defeats previously proposed solutions including fake-location detection and query rate limits.

Geo3DML: A standard-based exchange format for 3D geological models

Science.gov (United States)

Wang, Zhangang; Qu, Honggang; Wu, Zixing; Wang, Xianghong

2018-01-01

A geological model (geomodel) in three-dimensional (3D) space is a digital representation of the Earth's subsurface, recognized by geologists and stored in resultant geological data (geodata). The increasing demand for data management and interoperable applications of geomodelscan be addressed by developing standard-based exchange formats for the representation of not only a single geological object, but also holistic geomodels. However, current standards such as GeoSciML cannot incorporate all the geomodel-related information. This paper presents Geo3DML for the exchange of 3D geomodels based on the existing Open Geospatial Consortium (OGC) standards. Geo3DML is based on a unified and formal representation of structural models, attribute models and hierarchical structures of interpreted resultant geodata in different dimensional views, including drills, cross-sections/geomaps and 3D models, which is compatible with the conceptual model of GeoSciML. Geo3DML aims to encode all geomodel-related information integrally in one framework, including the semantic and geometric information of geoobjects and their relationships, as well as visual information. At present, Geo3DML and some supporting tools have been released as a data-exchange standard by the China Geological Survey (CGS).

Exploring Effect of Location Number on Map-Based Graphical Password Authentication

DEFF Research Database (Denmark)

Meng, Weizhi; Lee, Wang; Au, Man Ho

2017-01-01

select their secrets (geographical points) on a world map. In particular, PassMap allows users to select two locations on a map, while GeoPass reduces the number of locations to only one. At first glance, selecting one location is more vulnerable to attacks, while increasing the location number may add...

The standard-based open workflow system in GeoBrain (Invited)

Science.gov (United States)

Di, L.; Yu, G.; Zhao, P.; Deng, M.

2013-12-01

GeoBrain is an Earth science Web-service system developed and operated by the Center for Spatial Information Science and Systems, George Mason University. In GeoBrain, a standard-based open workflow system has been implemented to accommodate the automated processing of geospatial data through a set of complex geo-processing functions for advanced production generation. The GeoBrain models the complex geoprocessing at two levels, the conceptual and concrete. At the conceptual level, the workflows exist in the form of data and service types defined by ontologies. The workflows at conceptual level are called geo-processing models and cataloged in GeoBrain as virtual product types. A conceptual workflow is instantiated into a concrete, executable workflow when a user requests a product that matches a virtual product type. Both conceptual and concrete workflows are encoded in Business Process Execution Language (BPEL). A BPEL workflow engine, called BPELPower, has been implemented to execute the workflow for the product generation. A provenance capturing service has been implemented to generate the ISO 19115-compliant complete product provenance metadata before and after the workflow execution. The generation of provenance metadata before the workflow execution allows users to examine the usability of the final product before the lengthy and expensive execution takes place. The three modes of workflow executions defined in the ISO 19119, transparent, translucent, and opaque, are available in GeoBrain. A geoprocessing modeling portal has been developed to allow domain experts to develop geoprocessing models at the type level with the support of both data and service/processing ontologies. The geoprocessing models capture the knowledge of the domain experts and are become the operational offering of the products after a proper peer review of models is conducted. An automated workflow composition has been experimented successfully based on ontologies and artificial

OntoFire: an ontology-based geo-portal for wildfires

Directory of Open Access Journals (Sweden)

K. Kalabokidis

2011-12-01

Full Text Available With the proliferation of the geospatial technologies on the Internet, the role of geo-portals (i.e. gateways to Spatial Data Infrastructures in the area of wildfires management emerges. However, keyword-based techniques often frustrate users when looking for data of interest in geo-portal environments, while little attention has been paid to shift from the conventional keyword-based to navigation-based mechanisms. The presented OntoFire system is an ontology-based geo-portal about wildfires. Through the proposed navigation mechanisms, the relationships between the data can be discovered, which would otherwise not be possible when using conventional querying techniques alone. End users can use the browsing interface to find resources of interest by using the navigation mechanisms provided. Data providers can use the publishing interface to submit new metadata, modify metadata or removing metadata in/from the catalogue. The proposed approach can improve the discovery of valuable information that is necessary to set priorities for disaster mitigation and prevention strategies. OntoFire aspires to be a focal point of integration and management of a very large amount of information, contributing in this way to the dissemination of knowledge and to the preparedness of the operational stakeholders.

South African oil dependency : geo-political, geo-economic and geo-strategic considerations

OpenAIRE

2012-01-01

Ph.D. There is little research undertaken on the economic assessment of oil security of supply from the dimensions of geo-politics, geo-economics and geo-strategy. This study seeks to bridge the gap by providing new analytical and empirical work that captures the impact of geo-politics, geo-economics and geo-strategy on oil supply, consumption and price. This study is the first to define, analyse and contextualise the South African oil security of supply from a geo-political, geo-economic ...

Managing and delivering of 3D geo data across institutions has a web based solution - intermediate results of the project GeoMol.

Science.gov (United States)

Gietzel, Jan; Schaeben, Helmut; Gabriel, Paul

2014-05-01

The increasing relevance of geological information for policy and economy at transnational level has recently been recognized by the European Commission, who has called for harmonized information related to reserves and resources in the EU Member States. GeoMol's transnational approach responds to that, providing consistent and seamless 3D geological information of the Alpine Foreland Basins based on harmonized data and agreed methodologies. However, until recently no adequate tool existed to ensure full interoperability among the involved GSOs and to distribute the multi-dimensional information of a transnational project facing diverse data policy, data base systems and software solutions. In recent years (open) standards describing 2D spatial data have been developed and implemented in different software systems including production environments for 2D spatial data (like regular 2D-GI-Systems). Easy yet secured access to the data is of upmost importance and thus priority for any spatial data infrastructure. To overcome limitations conditioned by highly sophisticated and platform dependent geo modeling software packages functionalities of a web portals can be utilized. Thus, combining a web portal with a "check-in-check-out" system allows distributed organized editing of data and models but requires standards for the exchange of 3D geological information to ensure interoperability. Another major concern is the management of large models and the ability of 3D tiling into spatially restricted models with refined resolution, especially when creating countrywide models . Using GST ("Geosciences in Space and Time") developed initially at TU Bergakademie Freiberg and continuously extended by the company GiGa infosystems, incorporating these key issues and based on an object-relational data model, it is possible to check out parts or whole models for edits and check in again after modification. GST is the core of GeoMol's web-based collaborative environment designed to

Bi-static Optical Observations of GEO Objects

Science.gov (United States)

Seitzer, Patrick; Barker, Edwin S.; Cowardin, Heather; Lederer, Susan M.; Buckalew, Brent

2014-01-01

A bi-static study of objects at Geosynchronous Earth Orbit (GEO) was conducted using two ground-based wide-field optical telescopes. The University of Michigan's 0.6-m MODEST (Michigan Orbital Debris Survey Telescope) located at the Cerro Tololo Inter- American Observatory in Chile was employed in a series of coordinated observations with the U.S. Naval Observatory's (USNO) 1.3-m telescope at the USNO Flagstaff Station near Flagstaff, Arizona, USA. The goals of this project are twofold: (1) Obtain optical distances to known and unknown objects at GEO from the difference in the observed topocentric position of objects measured with respect to a reference star frame. The distance can be derived directly from these measurements, and is independent of any orbital solution. The wide geographical separation of these two telescopes means that the parallax difference is larger than ten degrees, and (2) Compare optical photometry in similar filters of GEO objects taken during the same time period from the two sites. The object's illuminated surfaces presented different angles of reflected sunlight to the two telescopes.During a four hour period on the night.of 22 February 2014 (UT), coordinated observations were obtained for eight different GEO positions. Each coordinated observation sequence was started on the hour or half-hour, and was selected to ensure the same cataloged GEO object was available in the field of view of both telescopes during the thirty minute observing sequence. GEO objects were chosen to be both controlled and uncontrolled at a range of orbital inclinations, and the objects were not tracked. Instead both telescopes were operated with all drives off in GEO survey mode to discover un-cataloged objects at GEO. The initial results from this proof-of-concept observing run will be presented, with the intent of laying the foundation for future large-scale bi-static observing campaigns of the GEO regime.

Using GeoMapApp in the Classroom

Science.gov (United States)

Goodwillie, A. M.

2017-12-01

The GeoMapApp tool has been updated with enhanced functionality that is useful in the classroom. Hosted as a service of the IEDA Facility at Columbia University, GeoMapApp (http://www.geomapapp.org) is a free resource that integrates a wide range of research-grade geoscience data in one intuitive map-based interface. It includes earthquake and volcano data, geological maps, plate tectonic data sets, and a high-resolution topography/bathymetry base map. Users can also import and analyse their own data files. Layering and transparency capabilities allow users to compare multiple data sets at once. The GeoMapApp interface presents data in its proper geospatial context, helping students more easily gain insight and understanding from the data. Simple tools for data manipulation allow students to analyse the data in different ways such as generating profiles and producing visualisations for reports. The new Save Session capability is designed to assist in the classroom: The educator saves a pre-loaded state of GeoMapApp. When shared with the class, the saved session file allows students to open GeoMapApp with exactly the same data sets loaded and the same display parameters chosen thus freeing up valuable time in which students can explore the data. In this presentation, activities related to plate tectonics will be highlighted. One activity helps students investigate plate boundaries by exploring earthquake and volcano locations. Another requires students to calculate the rate of seafloor spreading using crustal age data in various ocean basins. A third uses the GeoMapApp layering technique to explore the influence of geological forces in shaping the landscape. Educators report that using GeoMapApp in the classroom lowers the barriers to data accessibility for students; fosters an increased sense of data "ownership" - GeoMapApp presents the same data in the same tool used by researchers; allows engagement with authentic geoscience data; promotes STEM skills and

Research on presentation and query service of geo-spatial data based on ontology

Science.gov (United States)

Li, Hong-wei; Li, Qin-chao; Cai, Chang

2008-10-01

The paper analyzed the deficiency on presentation and query of geo-spatial data existed in current GIS, discussed the advantages that ontology possessed in formalization of geo-spatial data and the presentation of semantic granularity, taken land-use classification system as an example to construct domain ontology, and described it by OWL; realized the grade level and category presentation of land-use data benefited from the thoughts of vertical and horizontal navigation; and then discussed query mode of geo-spatial data based on ontology, including data query based on types and grade levels, instances and spatial relation, and synthetic query based on types and instances; these methods enriched query mode of current GIS, and is a useful attempt; point out that the key point of the presentation and query of spatial data based on ontology is to construct domain ontology that can correctly reflect geo-concept and its spatial relation and realize its fine formalization description.

GEO600: status and plans

International Nuclear Information System (INIS)

Willke, B

2007-01-01

The GEO600 gravitational wave detector located near Hannover in Germany is one of the four detectors of the LIGO Scientific Collaboration (LSC). For almost the entire year of 2006, GEO600 participated in the S5 science run of the LSC. Overall an equivalent of about 270 days of science data with an average peak sensitivity of better than 3 x 10 -22 Hz -1/2 have been acquired so far. In this paper, we describe the status of the GEO600 project during the period between January 2006 and February 2007. In addition, plans for the near-term and medium-term future are discussed

Towards Geo-spatial Hypermedia: Concepts and Prototype Implementation

DEFF Research Database (Denmark)

Grønbæk, Kaj; Vestergaard, Peter Posselt; Ørbæk, Peter

2002-01-01

This paper combines spatial hypermedia with techniques from Geographical Information Systems and location based services. We describe the Topos 3D Spatial Hypermedia system and how it has been developed to support geo-spatial hypermedia coupling hypermedia information to model representations...... of real world buildings and landscapes. The prototype experiments are primarily aimed at supporting architects and landscape architects in their work on site. Here it is useful to be able to superimpose and add different layers of information to, e.g. a landscape depending on the task being worked on. We...... and indirect navigation. Finally, we conclude with a number of research issues which are central to the future development of geo-spatial hypermedia, including design issues in combining metaphorical and literal hypermedia space, as well as a discussion of the role of spatial parsing in a geo-spatial context....

An Ultra-Low-Latency Geo-Routing Scheme for Team-Based Unmanned Vehicular Applications

KAUST Repository

Bader, Ahmed; Alouini, Mohamed-Slim

2016-01-01

Results and lessons learned from the implementation of a novel ultra low-latency geo-routing scheme are presented in this paper. The geo-routing scheme is intended for team-based mobile systems whereby a cluster of unmanned autonomous vehicles

Connecting People to Place: Stories, Science, Deep Maps, and Geo-Quests for Place-Based Learning

Science.gov (United States)

Hagley, C. A.; Silbernagel, J.; Host, G.; Hart, D. A.; Axler, R.; Fortner, R. W.; Axler, M.; Smith, V.; Drewes, A.; Bartsch, W.; Danz, N.; Mathews, J.; Wagler, M.

2016-02-01

The St. Louis River Estuary project (stlouisriverestuary.org) is about connecting the stories with the science of this special place to enhance spatial awareness and stewardship of the estuary. The stories, or spatial narratives, are told through vignettes of local resource activities, framed by perspectives of local people. The spatial narratives, developed through interviews and research, target six key activities of the estuary. The science is based on stressor gradients research, incorporating factors such as population and road density, pollutant point source density, and land use. The stressor gradient developed based on these factors was used as a basis for sampling water quality and plant and macroinvertebrate communities, with the intent of quantifying relationships between land-based stressors and aquatic ecosystem indicators of condition. The stories and science are interwoven, located in place on a Deep Map, and played out in GeoQuests to illustrate the complexity and multiple perspectives within the estuary's social, economic and ecological systems. Students, decision-makers, and Lake Superior enthusiasts can engage more deeply in the complexity of the stories and science by challenging themselves with these GeoQuests played on mobile devices. We hope these place-based learning tools will be valuable in advancing spatial literacy and conversation around environmental sustainability in coastal communities.

MyGeoHub: A Collaborative Geospatial Research and Education Platform

Science.gov (United States)

Kalyanam, R.; Zhao, L.; Biehl, L. L.; Song, C. X.; Merwade, V.; Villoria, N.

2017-12-01

Scientific research is increasingly collaborative and globally distributed; research groups now rely on web-based scientific tools and data management systems to simplify their day-to-day collaborative workflows. However, such tools often lack seamless interfaces, requiring researchers to contend with manual data transfers, annotation and sharing. MyGeoHub is a web platform that supports out-of-the-box, seamless workflows involving data ingestion, metadata extraction, analysis, sharing and publication. MyGeoHub is built on the HUBzero cyberinfrastructure platform and adds general-purpose software building blocks (GABBs), for geospatial data management, visualization and analysis. A data management building block iData, processes geospatial files, extracting metadata for keyword and map-based search while enabling quick previews. iData is pervasive, allowing access through a web interface, scientific tools on MyGeoHub or even mobile field devices via a data service API. GABBs includes a Python map library as well as map widgets that in a few lines of code, generate complete geospatial visualization web interfaces for scientific tools. GABBs also includes powerful tools that can be used with no programming effort. The GeoBuilder tool provides an intuitive wizard for importing multi-variable, geo-located time series data (typical of sensor readings, GPS trackers) to build visualizations supporting data filtering and plotting. MyGeoHub has been used in tutorials at scientific conferences and educational activities for K-12 students. MyGeoHub is also constantly evolving; the recent addition of Jupyter and R Shiny notebook environments enable reproducible, richly interactive geospatial analyses and applications ranging from simple pre-processing to published tools. MyGeoHub is not a monolithic geospatial science gateway, instead it supports diverse needs ranging from just a feature-rich data management system, to complex scientific tools and workflows.

SemantGeo: Powering Ecological and Environment Data Discovery and Search with Standards-Based Geospatial Reasoning

Science.gov (United States)

Seyed, P.; Ashby, B.; Khan, I.; Patton, E. W.; McGuinness, D. L.

2013-12-01

Recent efforts to create and leverage standards for geospatial data specification and inference include the GeoSPARQL standard, Geospatial OWL ontologies (e.g., GAZ, Geonames), and RDF triple stores that support GeoSPARQL (e.g., AllegroGraph, Parliament) that use RDF instance data for geospatial features of interest. However, there remains a gap on how best to fuse software engineering best practices and GeoSPARQL within semantic web applications to enable flexible search driven by geospatial reasoning. In this abstract we introduce the SemantGeo module for the SemantEco framework that helps fill this gap, enabling scientists find data using geospatial semantics and reasoning. SemantGeo provides multiple types of geospatial reasoning for SemantEco modules. The server side implementation uses the Parliament SPARQL Endpoint accessed via a Tomcat servlet. SemantGeo uses the Google Maps API for user-specified polygon construction and JsTree for providing containment and categorical hierarchies for search. SemantGeo uses GeoSPARQL for spatial reasoning alone and in concert with RDFS/OWL reasoning capabilities to determine, e.g., what geofeatures are within, partially overlap with, or within a certain distance from, a given polygon. We also leverage qualitative relationships defined by the Gazetteer ontology that are composites of spatial relationships as well as administrative designations or geophysical phenomena. We provide multiple mechanisms for exploring data, such as polygon (map-based) and named-feature (hierarchy-based) selection, that enable flexible search constraints using boolean combination of selections. JsTree-based hierarchical search facets present named features and include a 'part of' hierarchy (e.g., measurement-site-01, Lake George, Adirondack Region, NY State) and type hierarchies (e.g., nodes in the hierarchy for WaterBody, Park, MeasurementSite), depending on the ';axis of choice' option selected. Using GeoSPARQL and aforementioned ontology

Fluid migration through geo-membrane seams and through the interface between geo-membrane and geo-synthetic clay liner

International Nuclear Information System (INIS)

Barroso, M.

2005-03-01

both in laboratory and in field conditions to study the suitability of this test to assess the quality of the seams in situ. The results obtained suggest that it is possible to assess the quality of the geo-membrane seams from a non-destructive test conducted in situ by determining the time constant. To address the problem of fluid migration through geo-membrane defects, composite liners comprising a geo-membrane with a circular hole over a GCL over a CCL were simulated in tests at three scales. Flow rates at the interface between the geo-membrane and the GCL were measured. Correspondent interface transmissivity was estimated based on final flow rates and observation of the wetted area. A parametric study was performed to evaluate the influence of the pre-hydration of the GCL, the hydraulic head on top of the liner and the confining stress over the liner system, on the flow rate through composite liners due to defects in the geo-membrane, as well as to check the feasibility of an extrapolation of the results obtained on small-scale tests to field conditions. It was found that the transmissivity does not seem to be affected by the pre-hydration of the GCLs when low confining stresses were used. It also does not seem to be influenced by the increase in confining stress when non-pre-hydrated GCLs are used. Finally, the transmissivity does not seem to be significantly affected by the increase in hydraulic head. The results also suggest that predictions on flow rates though composite liners due to defects in the geo-membrane, which are based on transmissivity values obtained in small scale tests, are conservative. Lastly, based on the transmissivities obtained in this study, empirical equations for predicting the flow rate through composite liners consisting of a geo-membrane over a GCL over a CCL are proposed. Flow rates calculated using these equations are in better agreement with the flow rates measured experimentally than the empirical equations reported in literature

PaleoGeo: a Web based GIS database for paleoenvironmental studies

Science.gov (United States)

Song, Wonsuh; Kondo, Yasuhisa; Oguchi, Takashi

2014-05-01

Paleoenvironmental studies cover various fields such as paleohydrology, geomorphology, paleooceanology, paleobiology, paleoclimatology, and chronology. It is difficult for an individual researcher to collect and compile enormous data regarding these fields. We have been compiling portal data and presenting them using a web-based geographical information system (Web-GIS) called PaleoGeo for the multidisciplinary project 'Replacement of Neanderthals by Modern Humans'. The aim of the project is to reconstruct the distribution of Neanderthals and modern humans in time and space in relation to past climate change. We have been collecting information from almost three thousand articles of 13 journals regarding paleoenvironmental research (i.e., Boreas, Catena, Climatic Change, Earth Surface Processes and Landforms, Geomorphology, Journal of Quaternary Science, Palaeogeography, Palaeoclimatology, and Palaeoecology, Quaternary International, Quaternary Research, Quaternary Science Reviews, The Holocene, and The Journal of Geology). The topics of the articles were classified into six themes (paleohydrology, earth surface processes and materials, paleooceanology, paleobiology, palaeoclimatology, and chronology) and 19 subthemes (hydrology, flood, fluvial, glacier, fluvial/glacier, sedimentology, soil, slope process, periglacial, peat land, eolian, sea-level, biology, vegetation, zoology, vegetation/zoology, archaeology, climate, atmosphere, and chronology). The collected data consist of the journal name, information about each paper (authors, title, volume, year, and page numbers), site location (country name, longitude, and latitude), theme, subtheme, keywords, DOI (Digital Object Identifier), and period (era). Location data are indispensable for paleoenvironmental studies. The PaleoGeo shows information with a map, which is an advantage of this database system. However, the number of the paleoenvironmental studies is growing rapidly and we have to effectively cover them as

Environmental perspective of Location Based Services and Light Goods Vehicles in urban areas

Directory of Open Access Journals (Sweden)

2010-12-01

Full Text Available The article looks at the underexplored area of light goods vehicle (LGV operation. Specifically, it is investigated to what extent various location based services (LBS can be applied in the context of LGV operation in order to improve their environmental friendliness in urban areas. In doing so, LBS applied in real time navigation, dynamic fleet management, freight tracking and monitoring, hazardous materials transport, location-specific tolls and taxes and geo-eco-driving are described in relation to their usefulness in LGV operation as well as the potential in reducing LGV-originating pollution. Where available, real world examples of such applications are given. The discussion reveals particular significance in that context of real time navigation and dynamic fleet management, which are widely applicable solutions in LGVs operation. Freight monitoring and tracking, including hazardous materials transport, have been also found to be of an importance due, yet with a more limited applicability. As regards location-specific tolls and taxes, and geo-eco-driving, significant potential of these LBS has been identified, yet due to their very limited applicability in general, no robust conclusions could be drawn. Last but not least, a significant gap in the detailed knowledge regarding the area has been revealed and directions for further research have been suggested.

Auto-Scaling of Geo-Based Image Processing in an OpenStack Cloud Computing Environment

Directory of Open Access Journals (Sweden)

Sanggoo Kang

2016-08-01

Full Text Available Cloud computing is a base platform for the distribution of large volumes of data and high-performance image processing on the Web. Despite wide applications in Web-based services and their many benefits, geo-spatial applications based on cloud computing technology are still developing. Auto-scaling realizes automatic scalability, i.e., the scale-out and scale-in processing of virtual servers in a cloud computing environment. This study investigates the applicability of auto-scaling to geo-based image processing algorithms by comparing the performance of a single virtual server and multiple auto-scaled virtual servers under identical experimental conditions. In this study, the cloud computing environment is built with OpenStack, and four algorithms from the Orfeo toolbox are used for practical geo-based image processing experiments. The auto-scaling results from all experimental performance tests demonstrate applicable significance with respect to cloud utilization concerning response time. Auto-scaling contributes to the development of web-based satellite image application services using cloud-based technologies.

Visual analytics of geo-social interaction patterns for epidemic control.

Science.gov (United States)

Luo, Wei

2016-08-10

Human interaction and population mobility determine the spatio-temporal course of the spread of an airborne disease. This research views such spreads as geo-social interaction problems, because population mobility connects different groups of people over geographical locations via which the viruses transmit. Previous research argued that geo-social interaction patterns identified from population movement data can provide great potential in designing effective pandemic mitigation. However, little work has been done to examine the effectiveness of designing control strategies taking into account geo-social interaction patterns. To address this gap, this research proposes a new framework for effective disease control; specifically this framework proposes that disease control strategies should start from identifying geo-social interaction patterns, designing effective control measures accordingly, and evaluating the efficacy of different control measures. This framework is used to structure design of a new visual analytic tool that consists of three components: a reorderable matrix for geo-social mixing patterns, agent-based epidemic models, and combined visualization methods. With real world human interaction data in a French primary school as a proof of concept, this research compares the efficacy of vaccination strategies between the spatial-social interaction patterns and the whole areas. The simulation results show that locally targeted vaccination has the potential to keep infection to a small number and prevent spread to other regions. At some small probability, the local control strategies will fail; in these cases other control strategies will be needed. This research further explores the impact of varying spatial-social scales on the success of local vaccination strategies. The results show that a proper spatial-social scale can help achieve the best control efficacy with a limited number of vaccines. The case study shows how GS-EpiViz does support the design

Instrumental Genesis in GeoGebra Based Board Game Design

DEFF Research Database (Denmark)

Misfeldt, Morten

2013-01-01

In this paper I address the use of digital tools (GeoGebra) in open ended design activities, with primary school children. I present results from the research and development project “Creative Digital Mathematics”, which aims to use the pupil’s development of mathematical board games as a vehicle...... in their work with GeoGebra and how they relate their work with GeoGebra and mathematics to fellow pupils and real life situations. The results show that pupils’ consider development of board games as meaningful mathematical activity, and that they develop skills with GeoGebra, furthermore the pupils considers...... potential use of their board game by classmates in their design activities....

Auto-Scaling of Geo-Based Image Processing in an OpenStack Cloud Computing Environment

OpenAIRE

Sanggoo Kang; Kiwon Lee

2016-01-01

Cloud computing is a base platform for the distribution of large volumes of data and high-performance image processing on the Web. Despite wide applications in Web-based services and their many benefits, geo-spatial applications based on cloud computing technology are still developing. Auto-scaling realizes automatic scalability, i.e., the scale-out and scale-in processing of virtual servers in a cloud computing environment. This study investigates the applicability of auto-scaling to geo-bas...

Global Remote Sensing Data Subdivision Organization Based on GeoSOT%全球遥感数据剖分组织的 GeoSOT 网格应用

Institute of Scientific and Technical Information of China (English)

2014-01-01

At present, there are various data grids to organize data in different department data centers.In order to seek a remote sensing image data organization grid,which is compatible with the existing survey-ing and mapping data,a scheme of remote sensing data organization based on GeoSOT,geographical coordinate subdividing grid with one dimension integer coding on 2 n-tree,is proposed.it theoretically proves that GeoSOT has good isomorphism with National Topographic Map and other grids, such as Worldwind, Google Earth, Google Maps, Bing Maps and Mapworld, which makes GeoSOT gridinherit easily traditional surveying and mapping data and organize global remote sensing data.Under the premise of keeping the existing data organization,a virtual one global grid for global remote sensingdata organ-ization based on GeoSOT and a method of fast generating specification data products by GeoSOT cells aggregation are introduced.The test shows that it is very significantly to prove data integration efficiency with the virtual one global grid for global remote sensingdata organization based on GeoSOT.%针对目前不同部门按自身行业特点采用不同数据组织网格的问题，为寻求更适合于现有测绘数据组织体系兼容的遥感数据组织网格，提出基于GeoSOT网格的遥感数据组织方案，理论证明了Geo-SOT网格与国家地形图图幅和Worldwind、GoogleEarth、GoogleMaps、BingMaps、天地图等网格具有很好的同构性，有利于对传统测绘数据的继承。同时，在不改变现有数据组织体系的前提下，提出基于GeoSOT全球遥感数据“虚拟一张网”的数据组织模型和数据整合方法。通过试验证明，基于GeoSOT遥感影像“虚拟一张网”的数据组织可有效提高遥感数据整合效率。

Design Concepts for a Small Space-Based GEO Relay Satellite for Missions Between Low Earth and near Earth Orbits

Science.gov (United States)

Bhasin, Kul B.; Warner, Joseph D.; Oleson, Steven; Schier, James

2014-01-01

the number of links looking above and below GEO; the detailed design of a GEO SSBS spacecraft bus and its accommodation of the communication payload, and a summary of the trade study that resulted in the selection of the Falcon 9 launch vehicle to deploy the SSBS and its impact on cost reductions per satellite. ======================================================================== Several initiatives have taken place within NASA1 and international space agencies2 to create a human exploration strategy for expanding human presence into the solar system; these initiatives have been driven by multiple factors to benefit Earth. Of the many elements in the strategy one stands out: to send robotic and human missions to destinations beyond Low Earth Orbit (LEO), including cis-lunar space, Near-Earth Asteroids (NEAs), the Moon, and Mars and its moons.3, 4 The time frame for human exploration to various destinations, based on the public information available,1,4 is shown in Figure 1. Advance planning is needed to define how future space communications services will be provided in the new budget environment to meet future space communications needs. The spacecraft for these missions can be dispersed anywhere from below LEO to beyond GEO, and to various destinations within the solar system. NASA's Space Communications and Navigation (SCaN) program office provides communication and tracking services to space missions during launch, in-orbit testing, and operation phases. Currently, SCaN's space networking relay satellites mainly provide services to users below GEO, at Near Earth Orbit (NEO), below LEO, and in deep space. The potential exists for using a space-based relay satellite, located in the vicinity of various solar system destinations, to provide communication space links to missions both below and above its orbit. Such relays can meet the needs of human exploration missions for maximum connectivity to Earth locations and for reduced latency. In the past, several studies

CEOS Ocean Variables Enabling Research and Applications for Geo (COVERAGE)

Science.gov (United States)

Tsontos, V. M.; Vazquez, J.; Zlotnicki, V.

2017-12-01

The CEOS Ocean Variables Enabling Research and Applications for GEO (COVERAGE) initiative seeks to facilitate joint utilization of different satellite data streams on ocean physics, better integrated with biological and in situ observations, including near real-time data streams in support of oceanographic and decision support applications for societal benefit. COVERAGE aligns with programmatic objectives of CEOS (the Committee on Earth Observation Satellites) and the missions of GEO-MBON (Marine Biodiversity Observation Network) and GEO-Blue Planet, which are to advance and exploit synergies among the many observational programs devoted to ocean and coastal waters. COVERAGE is conceived of as 3 year pilot project involving international collaboration. It focuses on implementing technologies, including cloud based solutions, to provide a data rich, web-based platform for integrated ocean data delivery and access: multi-parameter observations, easily discoverable and usable, organized by disciplines, available in near real-time, collocated to a common grid and including climatologies. These will be complemented by a set of value-added data services available via the COVERAGE portal including an advanced Web-based visualization interface, subsetting/extraction, data collocation/matchup and other relevant on demand processing capabilities. COVERAGE development will be organized around priority use cases and applications identified by GEO and agency partners. The initial phase will be to develop co-located 25km products from the four Ocean Virtual Constellations (VCs), Sea Surface Temperature, Sea Level, Ocean Color, and Sea Surface Winds. This aims to stimulate work among the ocean VCs while developing products and system functionality based on community recommendations. Such products as anomalies from a time mean, would build on the theme of applications with a relevance to CEOS/GEO mission and vision. Here we provide an overview of the COVERAGE initiative with an

Living with geo-resources and geo-hazards

NARCIS (Netherlands)

Hangx, Suzanne|info:eu-repo/dai/nl/30483579X; Niemeijer, André|info:eu-repo/dai/nl/370832132

2015-01-01

Two of the key strategic topics on the European Committee’s Horizon2020 Roadmap revolve around geo-resources and geo-hazards, and their impact on societal and economic development. On the way towards a better policy for sustainable geo-resources production, such as oil, gas, geothermal energy and

Exploiting Deep Matching and SAR Data for the Geo-Localization Accuracy Improvement of Optical Satellite Images

Directory of Open Access Journals (Sweden)

Nina Merkle

2017-06-01

Full Text Available Improving the geo-localization of optical satellite images is an important pre-processing step for many remote sensing tasks like monitoring by image time series or scene analysis after sudden events. These tasks require geo-referenced and precisely co-registered multi-sensor data. Images captured by the high resolution synthetic aperture radar (SAR satellite TerraSAR-X exhibit an absolute geo-location accuracy within a few decimeters. These images represent therefore a reliable source to improve the geo-location accuracy of optical images, which is in the order of tens of meters. In this paper, a deep learning-based approach for the geo-localization accuracy improvement of optical satellite images through SAR reference data is investigated. Image registration between SAR and optical images requires few, but accurate and reliable matching points. These are derived from a Siamese neural network. The network is trained using TerraSAR-X and PRISM image pairs covering greater urban areas spread over Europe, in order to learn the two-dimensional spatial shifts between optical and SAR image patches. Results confirm that accurate and reliable matching points can be generated with higher matching accuracy and precision with respect to state-of-the-art approaches.

Characterizing GEO Titan IIIC Transtage Fragmentations Using Ground-based and Telescopic Measurements

Science.gov (United States)

Cowardin, H.; Anz-Meador, P.; Reyes, J. A.

In a continued effort to better characterize the geosynchronous orbit (GEO) environment, NASA’s Orbital Debris Program Office (ODPO) utilizes various ground-based optical assets to acquire photometric and spectral data of known debris associated with fragmentations in or near GEO. The Titan IIIC Transtage upper stage is known to have fragmented four times. Two of the four fragmentations were in GEO while the Transtage fragmented a third time in GEO transfer orbit. The forth fragmentation occurred in low Earth orbit. To better assess and characterize these fragmentations, the NASA ODPO acquired a Titan Transtage test and display article previously in the custody of the 309th Aerospace Maintenance and Regeneration Group (AMARG) in Tucson, Arizona. After initial inspections at AMARG demonstrated that it was of sufficient fidelity to be of interest, the test article was brought to NASA Johnson Space Center (JSC) to continue material analysis and historical documentation. The Transtage has undergone two separate spectral measurement campaigns to characterize the reflectance spectroscopy of historical aerospace materials. These data have been incorporated into the NASA Spectral Database, with the goal of using telescopic data comparisons for potential material identification. A Light Detection and Ranging (LIDAR) system scan also has been completed and a scale model has been created for use in the Optical Measurement Center (OMC) for photometric analysis of an intact Transtage, including bidirectional reflectance distribution function (BRDF) measurements. An historical overview of the Titan IIIC Transtage, the current analysis that has been done to date, and the future work to be completed in support of characterizing the GEO and near GEO orbital debris environment will be discussed in the subsequent presentation.

The GEOSS Clearinghouse based on the GeoNetwork opensource

Science.gov (United States)

Liu, K.; Yang, C.; Wu, H.; Huang, Q.

2010-12-01

The Global Earth Observation System of Systems (GEOSS) is established to support the study of the Earth system in a global community. It provides services for social management, quick response, academic research, and education. The purpose of GEOSS is to achieve comprehensive, coordinated and sustained observations of the Earth system, improve monitoring of the state of the Earth, increase understanding of Earth processes, and enhance prediction of the behavior of the Earth system. In 2009, GEO called for a competition for an official GEOSS clearinghouse to be selected as a source to consolidating catalogs for Earth observations. The Joint Center for Intelligent Spatial Computing at George Mason University worked with USGS to submit a solution based on the open-source platform - GeoNetwork. In the spring of 2010, the solution is selected as the product for GEOSS clearinghouse. The GEOSS Clearinghouse is a common search facility for the Intergovernmental Group on Ea rth Observation (GEO). By providing a list of harvesting functions in Business Logic, GEOSS clearinghouse can collect metadata from distributed catalogs including other GeoNetwork native nodes, webDAV/sitemap/WAF, catalog services for the web (CSW)2.0, GEOSS Component and Service Registry (http://geossregistries.info/), OGC Web Services (WCS, WFS, WMS and WPS), OAI Protocol for Metadata Harvesting 2.0, ArcSDE Server and Local File System. Metadata in GEOSS clearinghouse are managed in a database (MySQL, Postgresql, Oracle, or MckoiDB) and an index of the metadata is maintained through Lucene engine. Thus, EO data, services, and related resources can be discovered and accessed. It supports a variety of geospatial standards including CSW and SRU for search, FGDC and ISO metadata, and WMS related OGC standards for data access and visualization, as linked from the metadata.

GEO portal

Data.gov (United States)

US Agency for International Development — The USAID GeoPortal is a new application that groups web-based capabilities for on-demand discovery of and access to geospatial content, services, expertise, and...

Geo textiles and related products used in the waterproofing of reservoirs. Situation in Morocco

International Nuclear Information System (INIS)

Leiro Lopez, A.; Mateo Sanz, B.

2015-01-01

The aim of this paper is to describe the geo textiles, and products related to geo textiles, used for the building of water-storage reservoirs, which can be applicable to the construction of this kind of structures in Morocco. It presents different types of geo textiles and related products most commonly used in reservoirs, such as geo nets, geo grids, geo mats and geo composites, describing their characteristics and experimental methodology. Furthermore, and drawing on the Spanish Manual for Design, Construction, Operation and Maintenance of Reservoirs, emphasis is placed on the functions that geo synthetics can perform, such as protection and filter in the case of geo textiles, and drainage in the case of geo nets and draining composites. Finally, several works of this sort of structures located in Morocco are cited. (Author)

Balancing geo-privacy and spatial patterns in epidemiological studies

Directory of Open Access Journals (Sweden)

Chien-Chou Chen

2017-11-01

Full Text Available To balance the protection of geo-privacy and the accuracy of spatial patterns, we developed a geo-spatial tool (GeoMasker intended to mask the residential locations of patients or cases in a geographic information system (GIS. To elucidate the effects of geo-masking parameters, we applied 2010 dengue epidemic data from Taiwan testing the tool’s performance in an empirical situation. The similarity of pre- and post-spatial patterns was measured by D statistics under a 95% confidence interval. In the empirical study, different magnitudes of anonymisation (estimated Kanonymity ≥10 and 100 were achieved and different degrees of agreement on the pre- and post-patterns were evaluated. The application is beneficial for public health workers and researchers when processing data with individuals’ spatial information.

An Ultra-Low-Latency Geo-Routing Scheme for Team-Based Unmanned Vehicular Applications

KAUST Repository

Bader, Ahmed

2016-02-26

Results and lessons learned from the implementation of a novel ultra low-latency geo-routing scheme are presented in this paper. The geo-routing scheme is intended for team-based mobile systems whereby a cluster of unmanned autonomous vehicles are deployed to accomplish a critical mission under human supervision. The contention-free nature of the developed scheme lends itself to jointly achieve lower latency and higher throughput. Implementation challenges are presented and corresponding resolutions are discussed herewith. © 2015 IEEE.

The German-Chinese research collaboration YANGTZE-GEO: Assessing the geo-risks in the Three Gorges Reservoir area

Science.gov (United States)

Schönbrodt, S.; Behrens, T.; Bieger, K.; Ehret, D.; Frei, M.; Hörmann, G.; Seeber, C.; Schleier, M.; Schmalz, B.; Fohrer, N.; Kaufmann, H.; King, L.; Rohn, J.; Subklew, G.; Xiang, W.

2012-04-01

The river impoundment by The Three Gorges Dam leads to resettlement and land reclamation on steep slopes. As a consequence, ecosystem changes such as soil erosion, mass movements, and diffuse sediment and matter fluxes are widely expected to increase rapidly. In order to assess and analyse those ecosystem changes, the German-Chinese joint research project YANGTZE-GEO was set up in 2008. Within the framework of YANGTZE-GEO five German universities (Tuebingen, Erlangen, Giessen, Kiel, Potsdam) conducted studies on soil erosion, mass movements, diffuse matter inputs, and land use change and vulnerability in close collaboration with Chinese scientists. The Chinese partners and institutions are according to their alphabetic order of hometown the Chinese Research Academy of Environmental Sciences (CRAES; Beijing), the Standing Office of the State Council Three Gorges Project Construction Committee (Beijing), the National Climate Centre (NCC) of the China Meteorological Administration (CMA; Beijing), the Aero Geophysical Survey and Remote Sensing for Land and Resources (AES; Beijing), the Nanjing University, the CAS Institute of Soil Science (Nanjing), the Nanjing Institute of Geography and Limnology at CAS (NIGLAS; Nanjing), the China University of Geosciences (CUG; Wuhan), the CAS Institute of Hydrobiology (Wuhan), and the China Three Gorges University (Yichang). The overall aim of YANGTZE-GEO is the development of a risk assessment and forecasting system to locate high risk areas using GIS-based erosion modelling, data mining tools for terrace condition analysis and landslide recognition, eco-hydrological modelling for diffuse matter inputs, and state-of-the-art remote sensing to assess the landscape's vulnerability. Furthermore, the project aims at the recommendation of sustainable land management systems. YANGTZE-GEO showed the relevance of such research and crucially contributes to the understanding of the dimension and dynamics of the ecological consequences of

Geospatial Information Service System Based on GeoSOT Grid & Encoding

Directory of Open Access Journals (Sweden)

LI Shizhong

2016-12-01

Full Text Available With the rapid development of the space and earth observation technology, it is important to establish a multi-source, multi-scale and unified cross-platform reference for global data. In practice, the production and maintenance of geospatial data are scattered in different units, and the standard of the data grid varies between departments and systems. All these bring out the disunity of standards among different historical periods or orgnizations. Aiming at geospatial information security library for the national high resolution earth observation, there are some demands for global display, associated retrieval and template applications and other integrated services for geospatial data. Based on GeoSOT grid and encoding theory system, "geospatial information security library information of globally unified grid encoding management" data subdivision organization solutions have been proposed; system-level analyses, researches and designs have been carried out. The experimental results show that the data organization and management method based on GeoSOT can significantly improve the overall efficiency of the geospatial information security service system.

A rapid place name locating algorithm based on ontology qualitative retrieval, ranking and recommendation

Science.gov (United States)

Fan, Hong; Zhu, Anfeng; Zhang, Weixia

2015-12-01

In order to meet the rapid positioning of 12315 complaints, aiming at the natural language expression of telephone complaints, a semantic retrieval framework is proposed which is based on natural language parsing and geographical names ontology reasoning. Among them, a search result ranking and recommended algorithms is proposed which is regarding both geo-name conceptual similarity and spatial geometry relation similarity. The experiments show that this method can assist the operator to quickly find location of 12,315 complaints, increased industry and commerce customer satisfaction.

Location-Related Privacy in Geo-Social Networks

DEFF Research Database (Denmark)

Ruiz Vicente, Carmen; Freni, Dario; Bettini, Claudio

2011-01-01

-ins." However, this ability to reveal users' locations causes new privacy threats, which in turn call for new privacy-protection methods. The authors study four privacy aspects central to these social networks - location, absence, co-location, and identity privacy - and describe possible means of protecting...... privacy in these circumstances....

Encapsulation of Mg-Zr alloy in metakaolin-based geo-polymer

International Nuclear Information System (INIS)

Rooses, Adrien; Steins, Prune; Dannoux-Papin, Adeline; Lambertin, David; Poulesquen, Arnaud; Frizon, Fabien

2013-01-01

Investigations were carried out to propose a suitable material for the encapsulation of Mg-Zr alloy wastes issued from fuel cladding of the first generation nuclear reactors. Stability over time, good mechanical properties and low gas production are the main requirements that embedding matrices must comply with in order to be suitable for long run storage. One of the main issues encapsulating Mg-Zr alloy in mineral binder is the hydrogen production related to Mg-Zr alloys corrosion and water radiolysis process. In this context, metakaolin geo-polymers offer an interesting outlook: corrosion densities of Mg-Zr alloys are significantly lower than in Portland cement. This work firstly presents the hydrogen production of Mg-Zr alloy embedded in geo-polymers prepared from different the activation solution (NaOH or KOH). The effect of addition of fluorine on the magnesium corrosion in geo-polymer has been investigated too. The results point out that sodium geo-polymer is a suitable binder for Mg-Zr alloy encapsulation with respect to magnesium corrosion resistance. Furthermore the presence of fluorine reduces significantly the hydrogen release. Then, the impact of fluorine on the geo-polymer network formation was studied by rheological, calorimetric and 19 F NMR measurements. No direct effect resulting from the addition of fluorine has been shown on the geo-polymer binder. Secondly, the formulation of the encapsulation matrix has been adjusted to fulfil the expected physical and mechanical properties. Observations, dimensional evolutions and compressive strengths demonstrated that addition of sand to the geo-polymer binder is efficient to meet the storage criteria. Consequently, a matrix formulation compatible with Mg-Zr alloy encapsulation has been proposed. Finally, irradiation tests have been carried out to assess the hydrogen radiolytic yield of the matrix under exposure to γ radiation. (authors)

Nuclear physics for geo-neutrino studies

International Nuclear Information System (INIS)

Fiorentini, Gianni; Ianni, Aldo; Korga, George; Suvorov, Yury; Lissia, Marcello; Mantovani, Fabio; Miramonti, Lino; Oberauer, Lothar; Obolensky, Michel; Smirnov, Oleg

2010-01-01

Geo-neutrino studies are based on theoretical estimates of geo-neutrino spectra. We propose a method for a direct measurement of the energy distribution of antineutrinos from decays of long-lived radioactive isotopes. We present preliminary results for the geo-neutrinos from 214 Bi decay, a process that accounts for about one-half of the total geo-neutrino signal. The feeding probability of the lowest state of 214 Bi--the most important for geo-neutrino signal--is found to be p 0 =0.177±0.004 (stat) -0.001 +0.003 (sys), under the hypothesis of universal neutrino spectrum shape (UNSS). This value is consistent with the (indirect) estimate of the table of isotopes. We show that achievable larger statistics and reduction of systematics should allow for the testing of possible distortions of the neutrino spectrum from that predicted using the UNSS hypothesis. Implications on the geo-neutrino signal are discussed.

Influences of geo-spatial location on pre-exposure prophylaxis use in South Africa: positioning microbicides for better product uptake.

Science.gov (United States)

Govender, Eliza M; Mansoor, Leila E; Abdool Karim, Quarraisha

2017-06-01

Young women bear a disproportionately high burden of HIV infection in sub-Saharan Africa, prioritising pre-exposure prophylaxis (PrEP) can be an integral part of HIV prevention combination strategies. Women initiated HIV prevention technology options will require consistent adherence, an imperative for product effectiveness. With several PrEP clinical trials underway; exploring women's acceptability to advances in HIV prevention technologies can better facilitate demand creation for future PrEP roll out. This study utilised the opportunity of post-trial access to CAPRISA 008 women (trial) and non-trial women from three geo-spatial settings (urban, rural and peri-urban) to identify microbicide acceptability and how product associations of microbicides can influence future HIV prevention choices. Six participatory workshops using participatory action research with art-based activities and discussion groups were conducted in KwaZulu-Natal with 104 women from various geo-spatial locations and social status to understand microbicide acceptability and product associations. The data were analysed using thematic analysis. The study found that women's acceptability and product association of the tenofovir gel microbicide differed according to rural and urban areas. Most urban women identified confidence, sexiness and classiness as key associations that will encourage microbicide acceptability and use, while rural women identified respect, responsibility and confidence as the key product associations, with increased focus on the individual and collective family/community benefits of product acceptance and use. Urban-rural differences suggest a market segmentation that is contextualised to be locally responsive to promote HIV prevention technologies. Various sexual encounters further determined the types of HIV prevention technologies women would consider. In line with WHO's recommendation that PrEP should be an additional prevention choice for people at risk of HIV, this

Topologically Consistent Models for Efficient Big Geo-Spatio Data Distribution

Science.gov (United States)

Jahn, M. W.; Bradley, P. E.; Doori, M. Al; Breunig, M.

2017-10-01

Geo-spatio-temporal topology models are likely to become a key concept to check the consistency of 3D (spatial space) and 4D (spatial + temporal space) models for emerging GIS applications such as subsurface reservoir modelling or the simulation of energy and water supply of mega or smart cities. Furthermore, the data management for complex models consisting of big geo-spatial data is a challenge for GIS and geo-database research. General challenges, concepts, and techniques of big geo-spatial data management are presented. In this paper we introduce a sound mathematical approach for a topologically consistent geo-spatio-temporal model based on the concept of the incidence graph. We redesign DB4GeO, our service-based geo-spatio-temporal database architecture, on the way to the parallel management of massive geo-spatial data. Approaches for a new geo-spatio-temporal and object model of DB4GeO meeting the requirements of big geo-spatial data are discussed in detail. Finally, a conclusion and outlook on our future research are given on the way to support the processing of geo-analytics and -simulations in a parallel and distributed system environment.

The Geochemical Databases GEOROC and GeoReM - What's New?

Science.gov (United States)

Sarbas, B.; Jochum, K. P.; Nohl, U.; Weis, U.

2017-12-01

The geochemical databases GEOROC (http: georoc.mpch-mainz.gwdg.de) and GeoReM (http: georem.mpch-mainz.gwdg.de) are maintained by the Max Planck Institute for Chemistry in Mainz, Germany. Both online databases became crucial tools for geoscientists from different research areas. They are regularly upgraded by new tools and new data from recent publications obtained from a wide range of international journals. GEOROC is a collection of published analyses of volcanic rocks and mantle xenoliths. Since recently, data for plutonic rocks are added. The analyses include major and trace element concentrations, radiogenic and non-radiogenic isotope ratios as well as analytical ages for whole rocks, glasses, minerals and inclusions. Samples come from eleven geological settings and span the whole geological age scale from Archean to Recent. Metadata include, among others, geographic location, rock class and rock type, geological age, degree of alteration, analytical method, laboratory, and reference. The GEOROC web page allows selection of samples by geological setting, geography, chemical criteria, rock or sample name, and bibliographic criteria. In addition, it provides a large number of precompiled files for individual locations, minerals and rock classes. GeoReM is a database collecting information about reference materials of geological and environmental interest, such as rock powders, synthetic and natural glasses as well as mineral, isotopic, biological, river water and seawater reference materials. It contains published data and compilation values (major and trace element concentrations and mass fractions, radiogenic and stable isotope ratios). Metadata comprise, among others, uncertainty, analytical method and laboratory. Reference materials are important for calibration, method validation, quality control and to establish metrological traceability. GeoReM offers six different search strategies: samples or materials (published values), samples (GeoReM preferred

High Precision Optical Observations of Space Debris in the Geo Ring from Venezuela

Science.gov (United States)

Lacruz, E.; Abad, C.; Downes, J. J.; Casanova, D.; Tresaco, E.

2018-01-01

We present preliminary results to demonstrate that our method for detection and location of Space Debris (SD) in the geostationary Earth orbit (GEO) ring, based on observations at the OAN of Venezuela is of high astrometric precision. A detailed explanation of the method, its validation and first results is available in (Lacruz et al. 2017).

Utility assessment of a map-based online geo-collaboration tool.

Science.gov (United States)

Sidlar, Christopher L; Rinner, Claus

2009-05-01

Spatial group decision-making processes often include both informal and analytical components. Discussions among stakeholders or planning experts are an example of an informal component. When participants discuss spatial planning projects they typically express concerns and comments by pointing to places on a map. The Argumentation Map model provides a conceptual basis for collaborative tools that enable explicit linkages of arguments to the places to which they refer. These tools allow for the input of explicitly geo-referenced arguments as well as the visual access to arguments through a map interface. In this paper, we will review previous utility studies in geo-collaboration and evaluate a case study of a Web-based Argumentation Map application. The case study was conducted in the summer of 2005 when student participants discussed planning issues on the University of Toronto St. George campus. During a one-week unmoderated discussion phase, 11 participants wrote 60 comments on issues such as safety, facilities, parking, and building aesthetics. By measuring the participants' use of geographic references, we draw conclusions on how well the software tool supported the potential of the underlying concept. This research aims to contribute to a scientific approach to geo-collaboration in which the engineering of novel spatial decision support methods is complemented by a critical assessment of their utility in controlled, realistic experiments.

Geo-communication and Web-based Spatial Data Infrastructure

DEFF Research Database (Denmark)

Brodersen, Lars; Nielsen, Anders

2006-01-01

-services. This paper discusses the relations between the different components of SDI and geo-communication as well as the impacts thereof. Discussed is also a model for the organization of the passive components of the infrastructure; i.e. legislation, collaboration, standards, models, specifications, web......! Therefore there is a strong need for theories and models that can describe this complex web in the SDI and geo-communication consisting of active components, passive components, users and information in order to make it possible to handle the complexity and to give the necessary framework....

Development of Geo-Marketing

OpenAIRE

Tatiana Ozhereleva

2014-01-01

This article analyzes the state and development of geo-marketing. The author illustrates the multi-aspectedness of geo-marketing: applied technology and management technology. The article demonstrates that geo-marketing can be viewed as a reflection of the processes of co-evolution in society. The author brings to light the specifics of geo-marketing research and situational analysis in geo-marketing. The article describes applications of geo-marketing

Development of Geo-Marketing

Directory of Open Access Journals (Sweden)

Tatiana Ozhereleva

2014-10-01

Full Text Available This article analyzes the state and development of geo-marketing. The author illustrates the multi-aspectedness of geo-marketing: applied technology and management technology. The article demonstrates that geo-marketing can be viewed as a reflection of the processes of co-evolution in society. The author brings to light the specifics of geo-marketing research and situational analysis in geo-marketing. The article describes applications of geo-marketing

Requirements elicitation for geo-information solutions

NARCIS (Netherlands)

Robbi Sluter, Claudia; van Elzakker, Corné P.J.M.; Ivanova, Ivana

2017-01-01

Geo-information solutions can achieve a higher level of quality if they are developed in accordance with a user-centred design that requires definition of the user requirements in the first step of solution construction. We treat a geo-information solution as a system designed to support human-based

i-Locate - Indoor/Outdoor location and Asset Management through Open Data

Directory of Open Access Journals (Sweden)

Claudio Eccher

2015-02-01

Full Text Available Studi recenti hanno evidenziato che, in media, trascorriamo circa il 90% del nostro tempo in ambienti chiusi e, spesso, non familiari. L’esigenza di localizzare/guidare persone o ogg etti in spazi sia esterni che interni (senza discontinuità tra esterno ed interno darà origine ad una serie di nuovi servizi di tipo LBS (Location-Based Services che potranno avere anche una notevole rilevanza economica. i-locate (Indoor / outdoor location and Asset Management Through open geodata is a project that aims to develop a set of tools and services based on geo location technologies based on open data for the location and management of objects in indoor and outdoor spaces. The tools are intended both to citizens who use their smartphones to access services, aids to navigation from the front door to internal destinations to buildings (public office, clinic, shop, etc.. Obtaining any information available to support (code , unforeseen changes in the path, suggestions, etc., and professionals for specific activities that require the location of people, equipment, etc. i-locate to an intense use of GIS technologies for navigation and tracking "indoor" (indoor GIS, 3D GIS, to locate people (eg. Alzheimer's patients and their movements in areas not suited (geofencing to identify and track objects / portable equipment for their location, management and maintenance.

i-Locate - Indoor/Outdoor location and Asset Management through Open Data

Directory of Open Access Journals (Sweden)

Claudio Eccher

2015-02-01

Full Text Available Studi recenti hanno evidenziato che, in media, trascorriamo circa il 90% del nostro tempo in ambienti chiusi e, spesso, non familiari. L’esigenza di localizzare/guidare persone o ogg etti in spazi sia esterni che interni (senza discontinuità tra esterno ed interno darà origine ad una serie di nuovi servizi di tipo LBS (Location-Based Services che potranno avere anche una notevole rilevanza economica.i-locate (Indoor / outdoor location and Asset Management Through open geodata is a project that aims to develop a set of tools and services based on geo location technologies based on open data for the location and management of objects in indoor and outdoor spaces. The tools are intended both to citizens who use their smartphones to access services, aids to navigation from the front door to internal destinations to buildings (public office, clinic, shop, etc.. Obtaining any information available to support (code , unforeseen changes in the path, suggestions, etc., and professionals for specific activities that require the location of people, equipment, etc. i-locate to an intense use of GIS technologies for navigation and tracking "indoor" (indoor GIS, 3D GIS, to locate people (eg. Alzheimer's patients and their movements in areas not suited (geofencing to identify and track objects / portable equipment for their location, management and maintenance.

Development of an electronic emergency department-based geo-information injury surveillance system in Hong Kong.

Science.gov (United States)

Chow, C B; Leung, M; Lai, Adela; Chow, Y H; Chung, Joanne; Tong, K M; Lit, Albert

2012-06-01

To describe the experience in the development of an electronic emergency department (ED)-based injury surveillance (IS) system in Hong Kong using data-mining and geo-spatial information technology (IT) for a Safe Community setup. This paper described the phased development of an emergency department-based IS system based on World Health Organization (WHO) injury surveillance Guideline to support safety promotion and injury prevention in a Safe Community in Hong Kong starting 2002. The initial ED data-based only collected data on name, sex, age, address, eight general categories of injury types (traffic, domestic, common assault, indecent assault, batter, industrial, self-harm and sports) and disposal from ED. Phase 1--manual data collection on International Classification of External Causes of Injury pre-event data; Phase 2--manual form was converted to electronic format using web-based data mining technology with built in data quality monitoring mechanism; Phase 3--integration of injury surveillance-data with in-patient hospital information; and Phase 4--geo-spatial information and body mapping were introduced to geo-code exact place of injury in an electronic map and site of injury on body map. It was feasible to develop a geo-spatial IS system at busy ED to collect valuable information for safety promotion and injury prevention at Safe Community setting. The keys for successful development and implementation involves engagement of all stakeholders at design and implementation of the system with injury prevention as ultimate goal, detail workflow planning at front end, support from the management, building on exiting system and appropriate utilisation of modern technology. Copyright © 2011 Elsevier Ltd. All rights reserved.

The contradictory effects in efficiency and citizens' participation when employing geo-ICT apps within local government

NARCIS (Netherlands)

Kurniawan, M.; de Vries, W.T.

2015-01-01

With the increasing use of web-based mapping applications, inter-mediation between public planning agencies and citizens is changing. This article investigates how one form of inter-mediation, geo-ICT-enabled apps (applications on mobile phones and/or internet that use maps or locations as basic

Using Geo-Data Corporately on the Response Phase of Emergency Management

Science.gov (United States)

Demir Ozbek, E.; Ates, S.; Aydinoglu, A. C.

2015-08-01

Response phase of emergency management is the most complex phase in the entire cycle because it requires cooperation between various actors relating to emergency sectors. A variety of geo-data is needed at the emergency response such as; existing data provided by different institutions and dynamic data collected by different sectors at the time of the disaster. Disaster event is managed according to elaborately defined activity-actor-task-geodata cycle. In this concept, every activity of emergency response is determined with Standard Operation Procedure that enables users to understand their tasks and required data in any activity. In this study, a general conceptual approach for disaster and emergency management system is developed based on the regulations to serve applications in Istanbul Governorship Provincial Disaster and Emergency Directorate. The approach is implemented to industrial facility explosion example. In preparation phase, optimum ambulance locations are determined according to general response time of the ambulance to all injury cases in addition to areas that have industrial fire risk. Management of the industrial fire case is organized according to defined actors, activities, and working cycle that describe required geo-data. A response scenario was prepared and performed for an industrial facility explosion event to exercise effective working cycle of actors. This scenario provides using geo-data corporately between different actors while required data for each task is defined to manage the industrial facility explosion event. Following developing web technologies, this scenario based approach can be effective to use geo-data on the web corporately.

Geo-Neutrinos

International Nuclear Information System (INIS)

Dye, S.T.

2009-01-01

This paper briefly reviews recent developments in the field of geo-neutrinos. It describes current and future detection projects, discusses modeling projects, suggests an observational program, and visits geo-reactor hypotheses.

Geo-Neutrinos

Energy Technology Data Exchange (ETDEWEB)

Dye, S.T. [Department of Physics and Astronomy, University of Hawaii at Manoa, 2505 Correa Road, Honolulu, Hawaii, 96822 (United States); College of Natural Sciences, Hawaii Pacific University, 45-045 Kamehameha Highway, Kaneohe, Hawaii, 96744 (United States)

2009-03-15

This paper briefly reviews recent developments in the field of geo-neutrinos. It describes current and future detection projects, discusses modeling projects, suggests an observational program, and visits geo-reactor hypotheses.

Small Aperture Telescope Observations of Co-located Geostationary Satellites

Science.gov (United States)

Scott, R.; Wallace, B.

As geostationary orbit (GEO) continues to be populated, satellite operators are increasing usage of co-location techniques to maximize usage of fewer GEO longitude slots. Co-location is an orbital formation strategy where two or more geostationary satellites reside within one GEO stationkeeping box. The separation strategy used to prevent collision between the co-located satellites generally uses eccentricity (radial separation) and inclination (latitude separation) vector offsets. This causes the satellites to move in relative motion ellipses about each other as the relative longitude drift between the satellites is near zero. Typical separations between the satellites varies from 1 to 100 kilometers. When co-located satellites are observed by optical ground based space surveillance sensors the participants appear to be separated by a few minutes of arc or less in angular extent. Under certain viewing geometries, these satellites appear to visually conjunct even though the satellites are, in fact, well separated spatially. In situations where one of the co-located satellites is more optically reflective than the other, the reflected sunglint from the more reflective satellite can overwhelm the other. This less frequently encountered issue causes the less reflective satellite to be glint masked in the glare of the other. This paper focuses on space surveillance observations on co-located Canadian satellites using a small optical telescope operated by Defence R&D Canada - Ottawa. The two above mentioned problems (cross tagging and glint masking) are investigated and we quantify the results for Canadian operated geostationary satellites. The performance of two line element sets when making in-frame CCD image correlation between the co-located satellites is also examined. Relative visual magnitudes between the co-located members are also inspected and quantified to determine the susceptibility of automated telescopes to glint masking of co-located satellite members.

Installation of a seafloor geodetic network offshore northern Chile (GeoSEA)

Science.gov (United States)

Kopp, Heidrun; Lange, Dietrich; Hannemann, Katrin; Petersen, Florian; Contreras-Reyes, Eduardo

2016-04-01

The seafloor stores crucial information on sub-seafloor processes, including stress, elastic strain, and earthquake and tsunami generation. This information may be extracted through the nascent scientific field of seafloor geodesy. The target of the recently installed GeoSEA array (Geodetic Earthquake Observatory on the SEAfloor) is to measure crustal deformation in mm-scale on the marine forearc and outer rise of the South American subduction system around 21°S. This segment of the Nazca-South American plate boundary has last ruptured in an earthquake in 1877 and was identified as a seismic gap prior to the 2014 Iquique/Pisagua earthquake (Mw=8.1). The southern portion of the segment remains unbroken by a recent earthquake. Seafloor geodetic measurements provide a way to monitor crustal deformation at high resolution comparable to the satellite-based GPS technique upon which terrestrial geodesy is largely based. The GeoSEA Network consists of autonomous seafloor transponders installed on 4 m high tripods, which were lowered to the seabed on the deep-sea cable of RV SONNE in December 2015. The transponders within an array intercommunicate via acoustic signals for a period of up to 3.5 years and measure acoustic distance, tilt and pressure. An additional component of the network is GeoSURF, a self-steering autonomous surface vehicle (Wave Glider), which monitors system health and is capable to upload the seafloor data to the sea surface and to transfer it via satellite. We have chosen three areas on the middle and lower slope and the outer rise for the set-up of three sub-arrays. The array in Area 1 on the middle continental slope consists of 8 transponders located in pairs on four topographic ridges, which are surface expressions of faults at depth. Area 2 is located on the outer rise seaward of the trench where 5 stations monitor extension across plate-bending related normal faults. The third area is located at water depth >5000 m on the lower continental slope

Encoding of Geological knowledge in the GeoPiemonte Map Data Base

Science.gov (United States)

Piana, Fabrizio; Lombardo, Vincenzo; Mimmo, Dario; Barale, Luca; Irace, Andrea; Mulazzano, Elia

2017-04-01

In modern digital geological maps and geo-database, namely those devoted to interactive WebGIS services, there is the need to make explicit the geological assumptions in the process of the design and compilation of the Map Geodatabase. The Geodatabase of the Piemonte Geological Map, which consists of several thousands of Geologic Units and Geologic Structures, was designed in a way suitable for linking the knowledge of the geological domain at hand to more general levels of knowledge, represented in existing Earth Sciences ontologies and in a domain ontology (OntoGeonous), specifically designed for the project, though with a wide applicability in mind. The Geologic Units and Geologic Structures of the GeoPiemonte Map have been spatially correlated through the whole region, referring to a non-formal hierarchical scheme, which gives the parental relations between several orders of Geologic Units, putting them in relations with some main Geologic Events. The scheme reports the subdivisions we did on the Alps-Apennines orogenic belt (which constitutes the Piemonte geological framework) on which the architecture of the GeoDB relied. This contribution describes how the two different knowledge levels (specific domain vs. general knowledge) are assimilated within the GeoPiemonte informative system, providing relations between the contents of the geodatabase and the encoded concepts of the reference ontologies. Initiatives such as GeoScience Markup Language (GeoSciML 4.01, 2016 (1) and INSPIRE "Data Specification on Geology" (an operative simplification of GeoSciML, last version is 3.0, 2013) (2), as well as the recent terminological shepherding of the Geoscience Terminology Working Group (GTWG), provided us the authoritative standard geological source for knowledge encoding. Consistency and interoperability of geological data were thus sought, by classifying geologic features in an ontology-driven Data Model, while objects were described using GeoSciML controlled

MoMoSat -- Mobile Service for Monitoring with GeoNotes via Satellite

Energy Technology Data Exchange (ETDEWEB)

Niemeyer, Irmgard [Forschungszentrum Juelich (Germany). Programme Group Systems Analysis and Technology Evaluation (STE); Jonas, Karl [Univ. of Applied Science Bonn-Rhein-Sieg, Sankt Augustin (Germany). FhG FOKUS CC SATCom; Horz, Alexander [horz informatik, Sankt Augustin (Germany); Wettschereck, Dietrich; Schmidt, Dirk [DIALOGIS GmbH, Bonn (Germany)

2003-05-01

The MoMoSat service will enable mobile end-users to view, manage, annotate, and communicate mapbased information in the field. The handled information exists of a huge volume of raster (satellite or aerial images) and vector data (i.e. street networks, cadastral maps or points of interest), as well as text-specific geo-referenced textual notes (the so-called 'GeoNotes') and real-time voice. A secure real-time communication between mobile units and the primary data store is an essential task of the MoMoSat service. The basic information is stored in the primary database that is accessible through a virtual private network (VPN) and cached at a server at a base station in order to ensure data availability. The base station may be installed in a car or another mobile vehicle. The two servers will periodically communicate with each other via secure satellite communication in order to check for updates. The base station supplies the relevant GIS data for the mobile units (people or even robots in the field at remote solutions). The communication between the mobile units is based on a peer-to-peer wireless local area network (WLAN) architecture. The mobile units are equipped with mobile computers (i.e. laptop, tablet PC or PDA) combined with a satellite-based positioning system (GPS) that enables them to request the proper geographic data sets from yhe base station's map server. An interactive mapping software shows the actual location on the map and allows the user to navigate (zoom, pan) through the high-resolution map display. The user can switch 'on' or 'off' several thematic layers (i.e. street network or points of interest) on the map. The software also supports collaborative aspects of MoMoSat by offering tools for the management of the GeoNotes that can be visualized by categories. The user can extend the existing GeoNotes with his personnel comments or create new GeoNotes by defining categories, recipients and the level of

A GEOS-Based OSSE for the "MISTiC Winds" Concept

Science.gov (United States)

McCarty, W.; Blaisdell, J.; Fuentes, M.; Carvalho, D.; Errico, R.; Gelaro, R.; Kouvaris, L.; Moradi, I.; Pawson, S.; Prive, N.;

Spatial Data Infrastructure in the Perspective of Modern Geo-communication

DEFF Research Database (Denmark)

Brodersen, Lars; Nielsen, Anders

2006-01-01

-edge of communication-theories play important roles. The introduction of web-services as index-portals based on geo-information has changed the conditions for both content and form of geo-communication. A high number of players and interactions as well as a very high number of all kinds of information and combinations...... the increasing complexity. Modern web-based geo-communication and its infrastructure looks very complex, and it will get even more complex! Therefore there is a strong need for theories and models that can de-scribe this complex web in the SDI in the perspective of modern geo-communication....

Big Data analytics in the Geo-Spatial Domain

NARCIS (Netherlands)

R.A. Goncalves (Romulo); M.G. Ivanova (Milena); M.L. Kersten (Martin); H. Scholten; S. Zlatanova; F. Alvanaki (Foteini); P. Nourian (Pirouz); E. Dias

2014-01-01

htmlabstractBig data collections in many scientific domains have inherently rich spatial and geo-spatial features. Spatial location is among the core aspects of data in Earth observation sciences, astronomy, and seismology to name a few. The goal of our project is to design an efficient data

Geo-Parcel Based Crop Identification by Integrating High Spatial-Temporal Resolution Imagery from Multi-Source Satellite Data

Directory of Open Access Journals (Sweden)

Yingpin Yang

2017-12-01

Full Text Available Geo-parcel based crop identification plays an important role in precision agriculture. It meets the needs of refined farmland management. This study presents an improved identification procedure for geo-parcel based crop identification by combining fine-resolution images and multi-source medium-resolution images. GF-2 images with fine spatial resolution of 0.8 m provided agricultural farming plot boundaries, and GF-1 (16 m and Landsat 8 OLI data were used to transform the geo-parcel based enhanced vegetation index (EVI time-series. In this study, we propose a piecewise EVI time-series smoothing method to fit irregular time profiles, especially for crop rotation situations. Global EVI time-series were divided into several temporal segments, from which phenological metrics could be derived. This method was applied to Lixian, where crop rotation was the common practice of growing different types of crops, in the same plot, in sequenced seasons. After collection of phenological features and multi-temporal spectral information, Random Forest (RF was performed to classify crop types, and the overall accuracy was 93.27%. Moreover, an analysis of feature significance showed that phenological features were of greater importance for distinguishing agricultural land cover compared to temporal spectral information. The identification results indicated that the integration of high spatial-temporal resolution imagery is promising for geo-parcel based crop identification and that the newly proposed smoothing method is effective.

Classification of high resolution remote sensing image based on geo-ontology and conditional random fields

Science.gov (United States)

Hong, Liang

2013-10-01

The availability of high spatial resolution remote sensing data provides new opportunities for urban land-cover classification. More geometric details can be observed in the high resolution remote sensing image, Also Ground objects in the high resolution remote sensing image have displayed rich texture, structure, shape and hierarchical semantic characters. More landscape elements are represented by a small group of pixels. Recently years, the an object-based remote sensing analysis methodology is widely accepted and applied in high resolution remote sensing image processing. The classification method based on Geo-ontology and conditional random fields is presented in this paper. The proposed method is made up of four blocks: (1) the hierarchical ground objects semantic framework is constructed based on geoontology; (2) segmentation by mean-shift algorithm, which image objects are generated. And the mean-shift method is to get boundary preserved and spectrally homogeneous over-segmentation regions ;(3) the relations between the hierarchical ground objects semantic and over-segmentation regions are defined based on conditional random fields framework ;(4) the hierarchical classification results are obtained based on geo-ontology and conditional random fields. Finally, high-resolution remote sensed image data -GeoEye, is used to testify the performance of the presented method. And the experimental results have shown the superiority of this method to the eCognition method both on the effectively and accuracy, which implies it is suitable for the classification of high resolution remote sensing image.

Cementation of nuclear graphite using geo-polymers

International Nuclear Information System (INIS)

Girke, N.A.; Steinmetz, H.J.; Bukaemsky, A.; Bosbach, D.; Hermann, E.; Griebel, I.

2012-01-01

Geo-polymers are solid aluminosilicate materials usually formed by alkali hydroxide or alkali silicate activation of solid precursors such as coal fly ash, calcined clay and/or metallurgical slag. Today the primary application of geo-polymer technology is in the development of alternatives to Portland-based cements. Variations in the ratio of aluminium to silicon, and alkali to silicon or addition of structure support, produce geo-polymers with different physical and mechanical properties. These materials have an amorphous three-dimensional structure that gives geo-polymers certain properties, such as fire and acid resistance, low leach rate, which make them an ideal substitute for ordinary Portland cement (OPC) in a wide range of applications especially in conditioning and storage of radioactive waste. Therefore investigations have been initiated about how and to which amount graphite as a hydrophobic material can be mixed with cement or concrete to form stable waste products and which concretes fulfill the specifications at best. As result geo-polymers have been identified as a promising matrix for graphite containing nuclear wastes. With geo-polymers both favorable properties in the cementation process and a high long time structural stability of the products can be achieved. (authors)

ExaGeoStat: A High Performance Unified Framework for Geostatistics on Manycore Systems

KAUST Repository

Abdulah, Sameh

2017-08-09

We present ExaGeoStat, a high performance framework for geospatial statistics in climate and environment modeling. In contrast to simulation based on partial differential equations derived from first-principles modeling, ExaGeoStat employs a statistical model based on the evaluation of the Gaussian log-likelihood function, which operates on a large dense covariance matrix. Generated by the parametrizable Matern covariance function, the resulting matrix is symmetric and positive definite. The computational tasks involved during the evaluation of the Gaussian log-likelihood function become daunting as the number n of geographical locations grows, as O(n2) storage and O(n3) operations are required. While many approximation methods have been devised from the side of statistical modeling to ameliorate these polynomial complexities, we are interested here in the complementary approach of evaluating the exact algebraic result by exploiting advances in solution algorithms and many-core computer architectures. Using state-of-the-art high performance dense linear algebra libraries associated with various leading edge parallel architectures (Intel KNLs, NVIDIA GPUs, and distributed-memory systems), ExaGeoStat raises the game for statistical applications from climate and environmental science. ExaGeoStat provides a reference evaluation of statistical parameters, with which to assess the validity of the various approaches based on approximation. The framework takes a first step in the merger of large-scale data analytics and extreme computing for geospatial statistical applications, to be followed by additional complexity reducing improvements from the solver side that can be implemented under the same interface. Thus, a single uncompromised statistical model can ultimately be executed in a wide variety of emerging exascale environments.

Geo Uruguay

International Nuclear Information System (INIS)

2008-06-01

This book is based on the Geo Uruguay project which consists on the analysis and diagnosis of the environmental impact in the human welfare. The main topics covered in the different chapters are: human welfare, geographical aspects, climate change, transport and energy, changes in land use, coastal features, biodiversity, industrial urbanization, waste and territorial ordering, energy offers like oil, wood, natural gas, coal and electricity

Development of RESTful services and map-based user interface tools for access and delivery of data and metadata from the Marine-Geo Digital Library

Science.gov (United States)

Morton, J. J.; Ferrini, V. L.

2015-12-01

The Marine Geoscience Data System (MGDS, www.marine-geo.org) operates an interactive digital data repository and metadata catalog that provides access to a variety of marine geology and geophysical data from throughout the global oceans. Its Marine-Geo Digital Library includes common marine geophysical data types and supporting data and metadata, as well as complementary long-tail data. The Digital Library also includes community data collections and custom data portals for the GeoPRISMS, MARGINS and Ridge2000 programs, for active source reflection data (Academic Seismic Portal), and for marine data acquired by the US Antarctic Program (Antarctic and Southern Ocean Data Portal). Ensuring that these data are discoverable not only through our own interfaces but also through standards-compliant web services is critical for enabling investigators to find data of interest.Over the past two years, MGDS has developed several new RESTful web services that enable programmatic access to metadata and data holdings. These web services are compliant with the EarthCube GeoWS Building Blocks specifications and are currently used to drive our own user interfaces. New web applications have also been deployed to provide a more intuitive user experience for searching, accessing and browsing metadata and data. Our new map-based search interface combines components of the Google Maps API with our web services for dynamic searching and exploration of geospatially constrained data sets. Direct introspection of nearly all data formats for hundreds of thousands of data files curated in the Marine-Geo Digital Library has allowed for precise geographic bounds, which allow geographic searches to an extent not previously possible. All MGDS map interfaces utilize the web services of the Global Multi-Resolution Topography (GMRT) synthesis for displaying global basemap imagery and for dynamically provide depth values at the cursor location.

Using the GeoFEST Faulted Region Simulation System

Science.gov (United States)

Parker, Jay W.; Lyzenga, Gregory A.; Donnellan, Andrea; Judd, Michele A.; Norton, Charles D.; Baker, Teresa; Tisdale, Edwin R.; Li, Peggy

2004-01-01

GeoFEST (the Geophysical Finite Element Simulation Tool) simulates stress evolution, fault slip and plastic/elastic processes in realistic materials, and so is suitable for earthquake cycle studies in regions such as Southern California. Many new capabilities and means of access for GeoFEST are now supported. New abilities include MPI-based cluster parallel computing using automatic PYRAMID/Parmetis-based mesh partitioning, automatic mesh generation for layered media with rectangular faults, and results visualization that is integrated with remote sensing data. The parallel GeoFEST application has been successfully run on over a half-dozen computers, including Intel Xeon clusters, Itanium II and Altix machines, and the Apple G5 cluster. It is not separately optimized for different machines, but relies on good domain partitioning for load-balance and low communication, and careful writing of the parallel diagonally preconditioned conjugate gradient solver to keep communication overhead low. Demonstrated thousand-step solutions for over a million finite elements on 64 processors require under three hours, and scaling tests show high efficiency when using more than (order of) 4000 elements per processor. The source code and documentation for GeoFEST is available at no cost from Open Channel Foundation. In addition GeoFEST may be used through a browser-based portal environment available to approved users. That environment includes semi-automated geometry creation and mesh generation tools, GeoFEST, and RIVA-based visualization tools that include the ability to generate a flyover animation showing deformations and topography. Work is in progress to support simulation of a region with several faults using 16 million elements, using a strain energy metric to adapt the mesh to faithfully represent the solution in a region of widely varying strain.

The Case for GEO Hosted SSA Payloads

Science.gov (United States)

Welsch, C.; Armand, B.; Repp, M.; Robinson, A.

2014-09-01

Space situational awareness (SSA) in the geosynchronous earth orbit (GEO) belt presents unique challenges, and given the national importance and high value of GEO satellites, is increasingly critical as space becomes more congested and contested. Space situational awareness capabilities can serve as an effective deterrent against potential adversaries if they provide accurate, timely, and persistent information and are resilient to the threat environment. This paper will demonstrate how simple optical SSA payloads hosted on GEO commercial and government satellites can complement the SSA mission and data provided by Space-Based Space Surveillance (SBSS) and the Geosynchronous Space Situational Awareness Program (GSSAP). GSSAP is built by Orbital Sciences Corporation and launched on July 28, 2014. Analysis performed for this paper will show how GEO hosted SSA payloads, working in combination with SBSS and GSSAP, can increase persistence and timely coverage of high value assets in the GEO belt. The potential to further increase GEO object identification and tracking accuracy by integrating SSA data from multiple sources across different viewing angles including GEO hosted SSA sources will be addressed. Hosting SSA payloads on GEO platforms also increases SSA mission architecture resiliency as the sensors are by distributed across multiple platforms including commercial platforms. This distributed architecture presents a challenging target for an adversary to attempt to degrade or disable. We will present a viable concept of operations to show how data from hosted SSA sensors could be integrated with SBSS and GSSAP data to present a comprehensive and more accurate data set to users. Lastly, we will present an acquisition approach using commercial practices and building on lessons learned from the Commercially Hosted Infra Red Payload CHIRP to demonstrate the affordability of GEO hosted SSA payloads.

GEOS Code Development Road Map - May, 2013

Energy Technology Data Exchange (ETDEWEB)

Johnson, Scott [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Settgast, Randolph [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Fu, Pengcheng [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Antoun, Tarabay [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Ryerson, F. J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2013-05-03

GEOS is a massively parallel computational framework designed to enable HPC-based simulations of subsurface reservoir stimulation activities with the goal of optimizing current operations and evaluating innovative stimulation methods. GEOS will enable coupling of different solvers associated with the various physical processes occurring during reservoir stimulation in unique and sophisticated ways, adapted to various geologic settings, materials and stimulation methods. The overall architecture of the framework includes consistent data structures and will allow incorporation of additional physical and materials models as demanded by future applications. Along with predicting the initiation, propagation and reactivation of fractures, GEOS will also generate a seismic source term that can be linked with seismic wave propagation codes to generate synthetic microseismicity at surface and downhole arrays. Similarly, the output from GEOS can be linked with existing fluid/thermal transport codes. GEOS can also be linked with existing, non-intrusive uncertainty quantification schemes to constrain uncertainty in its predictions and sensitivity to the various parameters describing the reservoir and stimulation operations. We anticipate that an implicit-explicit 3D version of GEOS, including a preliminary seismic source model, will be available for parametric testing and validation against experimental and field data by Oct. 1, 2013.

Towards the creation of a European Network of Earth Observation Networks within GEO. The ConnectinGEO project.

Science.gov (United States)

Masó, Joan; Serral, Ivette; Menard, Lionel; Wald, Lucien; Nativi, Stefano; Plag, Hans-Peter; Jules-Plag, Shelley; Nüst, Daniel; Jirka, Simon; Pearlman, Jay; De Maziere, Martine

2015-04-01

ConnectinGEO (Coordinating an Observation Network of Networks EnCompassing saTellite and IN-situ to fill the Gaps in European Observations" is a new H2020 Coordination and Support Action with the primary goal of linking existing Earth Observation networks with science and technology (S&T) communities, the industry sector, the Group on Earth Observations (GEO), and Copernicus. ConnectinGEO aims to facilitate a broader and more accessible knowledge base to support the needs of GEO, its Societal Benefit Areas (SBAs) and the users of the Global Earth Observing System of Systems (GEOSS). A broad range of subjects from climate, natural resources and raw materials, to the emerging UN Sustainable Development Goals (SDGs) will be addressed. The project will generate a prioritized list of critical gaps within available observation data and models to translate observations into practice-relevant knowledge, based on stakeholder consultation and systematic analysis. Ultimately, it will increase coherency of European observation networks, increase the use of Earth observations for assessments and forecasts and inform the planning for future observation systems. ConnectinGEO will initiate a European Network of Earth Observation Networks (ENEON) that will encompass space-based, airborne and in-situ observations networks. ENEON will be composed by project partners representing thematic observation networks along with the GEOSS Science and Technology Stakeholder Network, GEO Communities of Practices, Copernicus services, Sentinel missions and in-situ support data representatives, representatives of the space-based, airborne and in-situ observations European networks (e.g. EPOS, EMSO and GROOM, etc), representatives of the industry sector and European and national funding agencies, in particular those participating in the future ERA-PlaNET. At the beginning, the ENEON will be created and managed by the project. Then the management will be transferred to the network itself to ensure

The Results of Complex Research of GSS "SBIRS-Geo 2" Behavior in the Orbit

Science.gov (United States)

Sukhov, P. P.; Epishev, V. P.; Sukhov, K. P.; Karpenko, G. F.; Motrunich, I. I.

2017-04-01

The new generation of geosynchronous satellites SBIRS of US Air Force early warning system series (Satellite Early Warning System) replaced the previous DSP-satellite series (Defense Support Program). Currently from the territory of Ukraine, several GSS of DSP series and one "SBIRS-Geo 2" are available to observation. During two years of observations, we have received and analyzed for two satellites more than 30 light curves in B, V, R photometric system. As a result of complex research, we propose a model of "SBIRS-Geo" 2 orbital behavior compared with the same one of the DSP-satellite. To control the entire surface of the Earth with 15-16 sec interval, including the polar regions, 4 SBIRS satellites located every 90 deg. along the equator are enough in GEO orbit. Since DSP-satellites provide the coverage of the Earth's surface to 83 deg. latitudes with a period of 50 sec, DSP-satellites should be 8. All the conclusions were made based on an analysis of photometric and coordinate observations using the simulation of the dynamics of their orbital behavior.

Geo-Spatial Social Network Analysis of Social Media to Mitigate Disasters

Science.gov (United States)

Carley, K. M.

2017-12-01

Understanding the spatial layout of human activity can afford a better understanding many phenomena - such as local cultural, the spread of ideas, and the scope of a disaster. Today, social media is one of the key sensors for acquiring information on socio-cultural activity, some with cues as to the geo-location. We ask, What can be learned by putting such data on maps? For example, are people who chat on line more likely to be near each other? Can Twitter data support disaster planning or early warning? In this talk, such issues are examined using data collected via Twitter and analyzed using ORA. ORA is a network analysis and visualization system. It supports not just social networks (who is interacting with whom), but also high dimensional networks with many types of nodes (e.g. people, organizations, resources, activities …) and relations, geo-spatial network analysis, dynamic network analysis, & geo-temporal analysis. Using ORA lessons learned from five case studies are considered: Arab Spring, Tsunami warning in Padang Indonesia, Twitter around Fukushima in Japan, Typhoon Haiyan (Yolanda), & regional conflict. Using Padang Indonesia data, we characterize the strengths and limitations of social media data to support disaster planning & early warning, identify at risk areas & issues of concern, and estimate where people are and which areas are impacted. Using Fukushima Japanese data, social media is used to estimate geo-spatial regularities in movement and communication that can inform disaster response and risk estimation. Using Arab Spring data, we find that the spread of bots & extremists varies by country and time, to the extent that using twitter to understand who is important or what ideas are critical can be compromised. Bots and extremists can exploit disaster messaging to create havoc and facilitate criminal activity e.g. human trafficking. Event discovery mechanisms support isolating geo-epi-centers for key events become crucial. Spatial inference

Geo-oculus: high resolution multi-spectral earth imaging mission from geostationary orbit

Science.gov (United States)

Vaillon, L.; Schull, U.; Knigge, T.; Bevillon, C.

2017-11-01

Geo-Oculus is a GEO-based Earth observation mission studied by Astrium for ESA in 2008-2009 to complement the Sentinel missions, the space component of the GMES (Global Monitoring for Environment & Security). Indeed Earth imaging from geostationary orbit offers new functionalities not covered by existing LEO observation missions, like real-time monitoring and fast revisit capability of any location within the huge area in visibility of the satellite. This high revisit capability is exploited by the Meteosat meteorogical satellites, but with a spatial resolution (500 m nadir for the third generation) far from most of GMES needs (10 to 100 m). To reach such ground resolution from GEO orbit with adequate image quality, large aperture instruments (> 1 m) and high pointing stability (challenges of such missions. To address the requirements from the GMES user community, the Geo-Oculus mission is a combination of routine observations (daily systematic coverage of European coastal waters) with "on-demand" observation for event monitoring (e.g. disasters, fires and oil slicks). The instrument is a large aperture imaging telescope (1.5 m diameter) offering a nadir spatial sampling of 10.5 m (21 m worst case over Europe, below 52.5°N) in a PAN visible channel used for disaster monitoring. The 22 multi-spectral channels have resolutions over Europe ranging from 40 m in UV/VNIR (0.3 to 1 μm) to 750 m in TIR (10-12 μm).

Spatial-Temporal Event Detection from Geo-Tagged Tweets

Directory of Open Access Journals (Sweden)

Yuqian Huang

2018-04-01

Full Text Available As one of the most popular social networking services in the world, Twitter allows users to post messages along with their current geographic locations. Such georeferenced or geo-tagged Twitter datasets can benefit location-based services, targeted advertising and geosocial studies. Our study focused on the detection of small-scale spatial-temporal events and their textual content. First, we used Spatial-Temporal Density-Based Spatial Clustering of Applications with Noise (ST-DBSCAN to spatially-temporally cluster the tweets. Then, the word frequencies were summarized for each cluster and the potential topics were modeled by the Latent Dirichlet Allocation (LDA algorithm. Using two years of Twitter data from four college cities in the U.S., we were able to determine the spatial-temporal patterns of two known events, two unknown events and one recurring event, which then were further explored and modeled to identify the semantic content about the events. This paper presents our process and recommendations for both finding event-related tweets as well as understanding the spatial-temporal behaviors and semantic natures of the detected events.

Study on the compressive strength of fly ash based geo polymer concrete

Science.gov (United States)

Anand Khanna, Pawan; Kelkar, Durga; Papal, Mahesh; Sekar, S. K.

2017-11-01

Introduction of the alternative materials for complete replacement of cement in ordinary concrete will play an important role to control greenhouse gas and its effect. The 100% replacement of binder with fly ash (in integration with potassium hydroxide (koh) and potassium silicate (k2sio3) solutions) in concrete gives a significant alternative to conventional cement concrete. This paper focuses on the effect of alkaline solutions koh and k2sio3 on strength properties of fly ash based geo polymer concrete (fgpc); compared the strength at different molarities of alkaline activator koh at different curing temperature. Fly ash based geo polymer concrete was produced from low calcium fly ash, triggered by addition of koh and k2sio3 solution and by assimilation of superplasticizer for suitable workability. The molarities of potassium hydroxide as 8m, 10m and 12m molarities were used at various curing temperatures such as 60°c, 70 °c and 80°c. Results showed that for given proportion to get maximum compressive strength the optimum molarity of alkaline solution is 12m and optimum curing temperature is 70 °c.

The application of brain-based learning principles aided by GeoGebra to improve mathematical representation ability

Science.gov (United States)

Priatna, Nanang

2017-08-01

The use of Information and Communication Technology (ICT) in mathematics instruction will help students in building conceptual understanding. One of the software products used in mathematics instruction is GeoGebra. The program enables simple visualization of complex geometric concepts and helps improve students' understanding of geometric concepts. Instruction applying brain-based learning principles is one oriented at the efforts of naturally empowering the brain potentials which enable students to build their own knowledge. One of the goals of mathematics instruction in school is to develop mathematical communication ability. Mathematical representation is regarded as a part of mathematical communication. It is a description, expression, symbolization, or modeling of mathematical ideas/concepts as an attempt of clarifying meanings or seeking for solutions to the problems encountered by students. The research aims to develop a learning model and teaching materials by applying the principles of brain-based learning aided by GeoGebra to improve junior high school students' mathematical representation ability. It adopted a quasi-experimental method with the non-randomized control group pretest-posttest design and the 2x3 factorial model. Based on analysis of the data, it is found that the increase in the mathematical representation ability of students who were treated with mathematics instruction applying the brain-based learning principles aided by GeoGebra was greater than the increase of the students given conventional instruction, both as a whole and based on the categories of students' initial mathematical ability.

Web catalog of oceanographic data using GeoNetwork

Science.gov (United States)

Marinova, Veselka; Stefanov, Asen

2017-04-01

Most of the data collected, analyzed and used by Bulgarian oceanographic data center (BgODC) from scientific cruises, argo floats, ferry boxes and real time operating systems are spatially oriented and need to be displayed on the map. The challenge is to make spatial information more accessible to users, decision makers and scientists. In order to meet this challenge, BgODC concentrate its efforts on improving dynamic and standardized access to their geospatial data as well as those from various related organizations and institutions. BgODC currently is implementing a project to create a geospatial portal for distributing metadata and search, exchange and harvesting spatial data. There are many open source software solutions able to create such spatial data infrastructure (SDI). Finally, the GeoNetwork open source is chosen, as it is already widespread. This software is free, effective and "cheap" solution for implementing SDI at organization level. It is platform independent and runs under many operating systems. Filling of the catalog goes through these practical steps: • Managing and storing data reliably within MS SQL spatial data base; • Registration of maps and data of various formats and sources in GeoServer (most popular open source geospatial server embedded with GeoNetwork) ; • Filling added meta data and publishing geospatial data at the desktop of GeoNetwork. GeoServer and GeoNetwork are based on Java so they require installing of a servlet engine like Tomcat. The experience gained from the use of GeoNetwork Open Source confirms that the catalog meets the requirements for data management and is flexible enough to customize. Building the catalog facilitates sustainable data exchange between end users. The catalog is a big step towards implementation of the INSPIRE directive due to availability of many features necessary for producing "INSPIRE compliant" metadata records. The catalog now contains all available GIS data provided by BgODC for Internet

GEOS Atmospheric Model: Challenges at Exascale

Science.gov (United States)

Putman, William M.; Suarez, Max J.

2017-01-01

The Goddard Earth Observing System (GEOS) model at NASA's Global Modeling and Assimilation Office (GMAO) is used to simulate the multi-scale variability of the Earth's weather and climate, and is used primarily to assimilate conventional and satellite-based observations for weather forecasting and reanalysis. In addition, assimilations coupled to an ocean model are used for longer-term forecasting (e.g., El Nino) on seasonal to interannual times-scales. The GMAO's research activities, including system development, focus on numerous time and space scales, as detailed on the GMAO website, where they are tabbed under five major themes: Weather Analysis and Prediction; Seasonal-Decadal Analysis and Prediction; Reanalysis; Global Mesoscale Modeling, and Observing System Science. A brief description of the GEOS systems can also be found at the GMAO website. GEOS executes as a collection of earth system components connected through the Earth System Modeling Framework (ESMF). The ESMF layer is supplemented with the MAPL (Modeling, Analysis, and Prediction Layer) software toolkit developed at the GMAO, which facilitates the organization of the computational components into a hierarchical architecture. GEOS systems run in parallel using a horizontal decomposition of the Earth's sphere into processing elements (PEs). Communication between PEs is primarily through a message passing framework, using the message passing interface (MPI), and through explicit use of node-level shared memory access via the SHMEM (Symmetric Hierarchical Memory access) protocol. Production GEOS weather prediction systems currently run at 12.5-kilometer horizontal resolution with 72 vertical levels decomposed into PEs associated with 5,400 MPI processes. Research GEOS systems run at resolutions as fine as 1.5 kilometers globally using as many as 30,000 MPI processes. Looking forward, these systems can be expected to see a 2 times increase in horizontal resolution every two to three years, as well as

GEO Label Web Services for Dynamic and Effective Communication of Geospatial Metadata Quality

Science.gov (United States)

Lush, Victoria; Nüst, Daniel; Bastin, Lucy; Masó, Joan; Lumsden, Jo

2014-05-01

-like label, which are coloured according to metadata availability and are clickable to allow a user to engage with the original metadata and explore specific aspects in more detail. To support this graphical representation and allow for wider deployment architectures we have implemented two Web services, a PHP and a Java implementation, that generate GEO label representations by combining producer metadata (from standard catalogues or other published locations) with structured user feedback. Both services accept encoded URLs of publicly available metadata documents or metadata XML files as HTTP POST and GET requests and apply XPath and XSLT mappings to transform producer and feedback XML documents into clickable SVG GEO label representations. The label and services are underpinned by two XML-based quality models. The first is a producer model that extends ISO 19115 and 19157 to allow fuller citation of reference data, presentation of pixel- and dataset- level statistical quality information, and encoding of 'traceability' information on the lineage of an actual quality assessment. The second is a user quality model (realised as a feedback server and client) which allows reporting and query of ratings, usage reports, citations, comments and other domain knowledge. Both services are Open Source and are available on GitHub at https://github.com/lushv/geolabel-service and https://github.com/52North/GEO-label-java. The functionality of these services can be tested using our GEO label generation demos, available online at http://www.geolabel.net/demo.html and http://geoviqua.dev.52north.org/glbservice/index.jsf.

Sites for locations of nuclear reactors

International Nuclear Information System (INIS)

Balcazar, M.; Huerta, M.; Lopez, A.

2014-10-01

A restriction on sites of nuclear energy is the history of seismic activity, in its magnitude (Richter) and intensity (Mercalli). This article delimits the areas of greatest magnitude and national seismic intensity, with restrictions of ground acceleration; the supplement areas with a low magnitude of seismic activity are shown. Potential sites for the location of these sites are introduced into a geographic information system. The set of geo-referenced data contains the location of the active volcanic manifestations; the historical record of earthquake epicenters, magnitudes and intensities; major geological faults; surface hydrology and water bodies; location of population density; protected areas; contour lines; the rock type or geology. The geographic information system allows entering normative criteria and environmental restrictions that correlate with geo-referenced data described above, forms both probable and exclusion areas for the installation of nuclear sites. (Author)

The Correlation of Geo-Ecological Environment and Mountain Urban planning

Science.gov (United States)

Yang, Chun; Zeng, Wei

2018-01-01

As a special area with the complex geological structure, mountain city is more prone to geological disasters. Due to air pollution, ground subsidence, serious water pollution, earthquakes and floods geo-ecological environment problems have become increasingly serious, mountain urban planning is facing more severe challenges. Therefore, this article bases on the correlation research of geo-ecological environment and mountain urban planning, and re-examins mountain urban planning from the perspective of geo-ecological, coordinates the relationship between the human and nature by geo-ecological thinking, raises the questions which urban planning need to pay attention. And advocates creating an integrated system of geo-ecological and mountain urban planning, analysis the status and dynamics of present mountain urban planning.

Viking telecommunication effects of GEOS satellite interference based on testing at the Madrid deep space station

Science.gov (United States)

Stuhr, F. V.; Kent, S. S.; Galvez, J. L.; Luaces, B. G.; Pasero, G. R.; Urech, J. M.

1976-01-01

In support of the ongoing NASA-European Space Agency (ESA) effort to understand and control possible interference between missions, testing was conducted at the Madrid Deep Space Station from July 1975 to February 1976 to characterize the effect on Viking 1975 telecommunication link performance of Geodetic Earth-Orbiting Satellite (GEOS) downlink signals. The prime use of the data was to develop a capability to predict GEOS interference effects for evaluation of Viking 1975 mission impacts and possible temporary GEOS shutdown. Also, the data would serve as a basis for assessment of the GEOS impact on missions other than Viking as well as for more general interference applications. Performances of the reference receiver, telemetry, and planetary ranging were measured in the presence of various types of GEOS-related interference, including an unmodulated GEOS carrier and simulation of the actual spectrum by an ESA-supplied GEOS suitcase model.

Simulation of Telescope Detectivity for Geo Survey and Tracking

Science.gov (United States)

Richard, P.

2014-09-01

As the number of space debris on Earths Orbit increases steadily, the need to survey, track and catalogue them becomes of key importance. In this context, CNES has been using the TAROT Telescopes (Rapid Telescopes for Transient Objects owned and operated by CNRS) for several years to conduct studies about space surveillance and tracking. Today, two testbeds of services using the TAROT telescopes are running every night: one for GEO situational awareness and the second for debris tracking. Additionally to the CNES research activity on space surveillance and tracking domain, an operational collision avoidance service for LEO and GEO satellites is in place at CNES for several years. This service named CAESAR (Conjunction Analysis and Evaluation: Alerts and Recommendations) is used by CNES as well as by external customers. As the optical debris tracking testbed based on TAROT telescopes is the first step toward an operational provider of GEO measures that could be used by CAESAR, simulations have been done to help choosing the sites and types of telescopes that could be added in the GEO survey and debris tracking telescope network. One of the distinctive characteristics of the optical observation of space debris compared to traditional astronomic observation is the need to observe objects at low elevations. The two mains reasons for this are the need to observe the GEO belt from non-equatorial sites and the need to observe debris at longitudes far from the telescope longitude. This paper presents the results of simulations of the detectivity for GEO debris of various telescopes and sites, based on models of the GEO belt, the atmosphere and the instruments. One of the conclusions is that clever detection of faint streaks and spread sources by image processing is one of the major keys to improve the detection of debris on the GEO belt.

Geo-communication, web-services, and spatial data infrastructure

DEFF Research Database (Denmark)

Brodersen, Lars; Nielsen, Anders

2007-01-01

The introduction of web-services as index-portals based on geo-information has changed the conditions for both content and form of geo-communication. A high number of players and interactions as well as a very high number of all kinds of information and combinations of these caracterise web...... looks very complex, and it will get even more complex. Therefore, there is a strong need for theories and models that can describe this complex web in the SDI and geo-communication consisting of active components, passive components, users, and information in order to make it possible to handle...

GeoServer cookbook

CERN Document Server

Iacovella, Stefano

2014-01-01

This book is ideal for GIS experts, developers, and system administrators who have had a first glance at GeoServer and who are eager to explore all its features in order to configure professional map servers. Basic knowledge of GIS and GeoServer is required.

Geostationary Coastal Ecosystem Dynamics Imager (GEO CEDI) for the GEO Coastal and Air Pollution Events (GEO CAPE) Mission. Concept Presentation

Science.gov (United States)

Janz, Scott; Smith, James C.; Mannino, Antonio

2010-01-01

This slide presentation reviews the concepts of the Geostationary Coastal Ecosystem Dynamics Imager (GEO CEDI) which will be used on the GEO Coastal and Air Pollution Events (GEO CAPE) Mission. The primary science requirements require scans of the U.S. Coastal waters 3 times per day during the daylight hours. Included in the overview are presentations about the systems, the optics, the detectors, the mechanical systems, the electromechanical systems, the electrical design, the flight software, the thermal systems, and the contamination prevention requirements.

Geospatial data sharing, online spatial analysis and processing of Indian Biodiversity data in Internet GIS domain - A case study for raster based online geo-processing

Science.gov (United States)

Karnatak, H.; Pandey, K.; Oberai, K.; Roy, A.; Joshi, D.; Singh, H.; Raju, P. L. N.; Krishna Murthy, Y. V. N.

2014-11-01

National Biodiversity Characterization at Landscape Level, a project jointly sponsored by Department of Biotechnology and Department of Space, was implemented to identify and map the potential biodiversity rich areas in India. This project has generated spatial information at three levels viz. Satellite based primary information (Vegetation Type map, spatial locations of road & village, Fire occurrence); geospatially derived or modelled information (Disturbance Index, Fragmentation, Biological Richness) and geospatially referenced field samples plots. The study provides information of high disturbance and high biological richness areas suggesting future management strategies and formulating action plans. The study has generated for the first time baseline database in India which will be a valuable input towards climate change study in the Indian Subcontinent. The spatial data generated during the study is organized as central data repository in Geo-RDBMS environment using PostgreSQL and POSTGIS. The raster and vector data is published as OGC WMS and WFS standard for development of web base geoinformation system using Service Oriented Architecture (SOA). The WMS and WFS based system allows geo-visualization, online query and map outputs generation based on user request and response. This is a typical mashup architecture based geo-information system which allows access to remote web services like ISRO Bhuvan, Openstreet map, Google map etc., with overlay on Biodiversity data for effective study on Bio-resources. The spatial queries and analysis with vector data is achieved through SQL queries on POSTGIS and WFS-T operations. But the most important challenge is to develop a system for online raster based geo-spatial analysis and processing based on user defined Area of Interest (AOI) for large raster data sets. The map data of this study contains approximately 20 GB of size for each data layer which are five in number. An attempt has been to develop system using

Penn State geoPebble system: Design,Implementation, and Initial Results

Science.gov (United States)

Urbina, J. V.; Anandakrishnan, S.; Bilen, S. G.; Fleishman, A.; Burkett, P.

2014-12-01

The Penn State geoPebble system is a new network of wirelessly interconnected seismic and GPS sensor nodes with flexible architecture. This network will be used for studies of ice sheets in Antarctica and Greenland, as well as to investigate mountain glaciers. The network will consist of ˜150 geoPebbles that can be deployed in a user-defined spatial geometry. We present our design methodology, which has enabled us to develop these state-of- the art sensors using commercial-off-the-shelf hardware combined with custom-designed hardware and software. Each geoPebble is a self- contained, wirelessly connected sensor for collecting seismic measurements and position information. Key elements of each node encompasses a three-component seismic recorder, which includes an amplifier, filter, and 24- bit analog-to-digital converter that can sample up to 10 kHz. Each unit also includes a microphone channel to record the ground-coupled airwave. The timing for each node is available from GPS measurements and a local precision oscillator that is conditioned by the GPS timing pulses. In addition, we record the carrier-phase measurement of the L1 GPS signal in order to determine location at sub-decimeter accuracy (relative to other geoPebbles within a few kilometers radius). Each geoPebble includes 16 GB of solid-state storage, wireless communications capability to a central supervisory unit, and auxiliary measurements capability (including tilt from accelerometers, absolute orientation from magnetometers and temperature). A novel aspect of the geoPebble is a wireless charging system for the internal battery (using inductive coupling techniques). The geoPebbles include all the sensors (geophones, GPS, microphone), communications (WiFi), and power (battery and charging) internally, so the geoPebble system can operate without any cabling connections (though we do provide an external connector so that different geophones can be used). We report initial field-deployment results and

Charting a Path to Location Intelligence for STD Control.

Science.gov (United States)

Gerber, Todd M; Du, Ping; Armstrong-Brown, Janelle; McNutt, Louise-Anne; Coles, F Bruce

2009-01-01

This article describes the New York State Department of Health's GeoDatabase project, which developed new methods and techniques for designing and building a geocoding and mapping data repository for sexually transmitted disease (STD) control. The GeoDatabase development was supported through the Centers for Disease Control and Prevention's Outcome Assessment through Systems of Integrated Surveillance workgroup. The design and operation of the GeoDatabase relied upon commercial-off-the-shelf tools that other public health programs may also use for disease-control systems. This article provides a blueprint of the structure and software used to build the GeoDatabase and integrate location data from multiple data sources into the everyday activities of STD control programs.

GeoBoost: accelerating research involving the geospatial metadata of virus GenBank records.

Science.gov (United States)

Tahsin, Tasnia; Weissenbacher, Davy; O'Connor, Karen; Magge, Arjun; Scotch, Matthew; Gonzalez-Hernandez, Graciela

2018-05-01

GeoBoost is a command-line software package developed to address sparse or incomplete metadata in GenBank sequence records that relate to the location of the infected host (LOIH) of viruses. Given a set of GenBank accession numbers corresponding to virus GenBank records, GeoBoost extracts, integrates and normalizes geographic information reflecting the LOIH of the viruses using integrated information from GenBank metadata and related full-text publications. In addition, to facilitate probabilistic geospatial modeling, GeoBoost assigns probability scores for each possible LOIH. Binaries and resources required for running GeoBoost are packed into a single zipped file and freely available for download at https://tinyurl.com/geoboost. A video tutorial is included to help users quickly and easily install and run the software. The software is implemented in Java 1.8, and supported on MS Windows and Linux platforms. gragon@upenn.edu. Supplementary data are available at Bioinformatics online.

Privacy for location-based services

CERN Document Server

Ghinita, Gabriel

2013-01-01

Sharing of location data enables numerous exciting applications, such as location-based queries, location-based social recommendations, monitoring of traffic and air pollution levels, etc. Disclosing exact user locations raises serious privacy concerns, as locations may give away sensitive information about individuals' health status, alternative lifestyles, political and religious affiliations, etc. Preserving location privacy is an essential requirement towards the successful deployment of location-based applications. These lecture notes provide an overview of the state-of-the-art in locatio

Registration of indoor TLS data: in favor of a probabilistic approach initialized by geo-location

International Nuclear Information System (INIS)

Hullo, Jean-Francois

2013-01-01

Many pre-maintenance operations of industrial facilities currently resort on to three dimensional CAD models. The acquisition of these models is performed from point clouds measured by Terrestrial Laser Scanning (TLS). When the scenes are complex, several view points for scanning, also known as stations, are necessary to ensure the completeness and the density of the survey data. The generation of a global point cloud, i.e. the expression of all the acquired data in a common reference frame, is a crucial step called registration. During this process, the pose parameters are estimated. If the GNSS Systems are now a solution for many outdoor scenes, the registration of indoor TLS data still remains a challenge. The goal of this thesis is to improve the acquisition process of TLS data in industrial environments. The aim is to guarantee the precision and accuracy of acquired data, while optimizing on-site acquisition time and protocols by, as often as possible, freeing the operator from the constraints inherent to conventional topography surveys. In a first part, we consider the state of the art of the means and methods used during the acquisition of dense point clouds of complex interior scenes (Part I). In a second part, we study and evaluate the data available for the registration: terrestrial laser data, primitive reconstruction algorithms in point clouds and indoor geo-location Systems (Part II). In the third part, we then formalize and experiment a registration algorithm based on the use of matched primitives, reconstructed from per station point clouds ( Part III). We finally propose a probabilistic approach for matching primitives, allowing the integration of a priori information and uncertainty in the constraints System used for calculating poses (Part IV). The contributions of our work are as follows: - to take a critical look at current methods of TLS data acquisition in industrial environments, - to evaluate, through experimentations, the information

Investigation Antiwear Properties of Lubricants with the Geo-Modifiers of Friction

Directory of Open Access Journals (Sweden)

I. Levanov

2017-09-01

Full Text Available The article describes the influence of the geo-modifiers of friction on the antiwear properties of lubricants. Geo-modifiers of friction are the fine powders of mineral materials. This work is directed on the investigation the influence of the geo-modifiers of friction in the form of the hard lubricant compositions, which based on a mineral serpentine, on the anti-wear properties of greases and gear oils. This composition is the fine powder serpentine with the addition of components such as chalk, borax, kaolin and talc. We compared the antiwear properties of the greases without geo-modifiers of friction and the antiwear properties of greases containing the geo-modifiers of friction from 0.5 % to 3 %. The Litol-24 and transmission oil TAD-17 was used for testihg. The four-ball machine of friction was used for tests accordance with GOST 9490-75. As geo-modifiers the serpentine was used, the fraction of which has a size from 0.87 microns to 2.2 microns. Such parameter as the wear scar diameter was used for evaluation of the antiwear properties of lubricants. As a result of tests it was established that the antiwear greases properties improved on 26-50 % depending on the concentration of the geo-modifiers of friction based on the pure serpentine.

GEOS. User Tutorials

Energy Technology Data Exchange (ETDEWEB)

Fu, Pengchen [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Settgast, Randolph R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Johnson, Scott M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Walsh, Stuart D.C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Morris, Joseph P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Ryerson, Frederick J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2014-12-17

GEOS is a massively parallel, multi-physics simulation application utilizing high performance computing (HPC) to address subsurface reservoir stimulation activities with the goal of optimizing current operations and evaluating innovative stimulation methods. GEOS enables coupling of di erent solvers associated with the various physical processes occurring during reservoir stimulation in unique and sophisticated ways, adapted to various geologic settings, materials and stimulation methods. Developed at the Lawrence Livermore National Laboratory (LLNL) as a part of a Laboratory-Directed Research and Development (LDRD) Strategic Initiative (SI) project, GEOS represents the culmination of a multi-year ongoing code development and improvement e ort that has leveraged existing code capabilities and sta expertise to design new computational geosciences software.

SOIL Geo-Wiki: A tool for improving soil information

Science.gov (United States)

Skalský, Rastislav; Balkovic, Juraj; Fritz, Steffen; See, Linda; van der Velde, Marijn; Obersteiner, Michael

2014-05-01

Crowdsourcing is increasingly being used as a way of collecting data for scientific research, e.g. species identification, classification of galaxies and unravelling of protein structures. The WorldSoilProfiles.org database at ISRIC is a global collection of soil profiles, which have been 'crowdsourced' from experts. This system, however, requires contributors to have a priori knowledge about soils. Yet many soil parameters can be observed in the field without specific knowledge or equipment such as stone content, soil depth or color. By crowdsourcing this information over thousands of locations, the uncertainty in current soil datasets could be radically reduced, particularly in areas currently without information or where multiple interpretations are possible from different existing soil maps. Improved information on soils could benefit many research fields and applications. Better soil data could enhance assessments of soil ecosystem services (e.g. soil carbon storage) and facilitate improved process-based ecosystem modeling from local to global scales. Geo-Wiki is a crowdsourcing tool that was developed at IIASA for land cover validation using satellite imagery. Several branches are now available focused on specific aspects of land cover validation, e.g. validating cropland extent or urbanized areas. Geo-Wiki Pictures is a smart phone application for collecting land cover related information on the ground. The extension of Geo-Wiki to a mobile environment provides a tool for experts in land cover validation but is also a way of reaching the general public in the validation of land cover. Here we propose a Soil Geo-Wiki tool that builds on the existing functionality of the Geo-Wiki application, which will be largely designed for the collection and sharing of soil information. Two distinct applications are envisaged: an expert-oriented application mainly for scientific purposes, which will use soil science related language (e.g. WRB or any other global reference

GeoCF - Smart Power Maps - Final Technical Report

Energy Technology Data Exchange (ETDEWEB)

Holcomb, Chris [GeoCF LLC, Austin, TX (United States)

2017-12-21

GeoCF has greatly enhanced the utility-scale solar siting platform, Smart Power Maps, through the help of the DOE Solar Energy Technologies Office. It is now available for the entire country and includes an improved user interface and additional layers such as topology, soils, comprehensive floodplains, parcels, imagery, wells, pipelines, and more. As well, users can now draw and save maps and perform drastically improved and more relevant hydrological, transmission, and financial analyzes. Smart Power Maps has played a pivotal role in supporting the development of otherwise unknown or hard to locate ideal locations for large solar farms in the United States.

The geo-reactor. A link between nuclear fission and geothermal energy?

International Nuclear Information System (INIS)

Degueldre, Claude; Fiorina, Carlo

2013-01-01

Recent high-precision isotope analysis data suggests the potential occurrence of a geo-reactor. Specific gas isotopes that could have been generated by binary and ternary fissions were identified in volcano emanations or as soluble/associated species in crystalline rocks and semi-quantitatively evaluated as isotopic ratio or estimated amounts. Presently if it is evident that according to the actinide inventory on the Earth, local potential criticality of the geo-system may have been reached, several questions remain such as why, where and when did a geo-reactor be operational? Even if the hypothesis of a geo-reactor operation in the proto-Earth period should be acceptable, it could be difficult to anticipate that a geo-reactor is still operating today. This could be tested in the future by assessing and reconstructing the system by antineutrino detection and tomography through the Earth. The present paper focuses on the geo-reactor conditions including history, spatial extension and regimes. The discussion based on recent calculations involves investigations on the limits in term of fissile inventory, size and power, based on stratification through the gravitational field and the various features through the inner mantel, the boundary with the core, the external part and the inner-core. the reconstruction allows to formulating that from the history point of view there are possibilities that the geo-reactor reached criticality in a proto-Earth period as a thorium/uranium reactor triggered by an under-layer with heavier actinides. The geo-reactor should be a key component of geothermal energy sources. (author)

GeoGebra for Mathematical Statistics

Science.gov (United States)

Hewson, Paul

2009-01-01

The GeoGebra software is attracting a lot of interest in the mathematical community, consequently there is a wide range of experience and resources to help use this application. This article briefly outlines how GeoGebra will be of great value in statistical education. The release of GeoGebra is an excellent example of the power of free software…

Comparative Analysis of NOAA REFM and SNB3GEO Tools for the Forecast of the Fluxes of High-Energy Electrons at GEO

Science.gov (United States)

Balikhin, M. A.; Rodriguez, J. V.; Boynton, R. J.; Walker, S. N.; Aryan, Homayon; Sibeck, D. G.; Billings, S. A.

2016-01-01

Reliable forecasts of relativistic electrons at geostationary orbit (GEO) are important for the mitigation of their hazardous effects on spacecraft at GEO. For a number of years the Space Weather Prediction Center at NOAA has provided advanced online forecasts of the fluence of electrons with energy >2 MeV at GEO using the Relativistic Electron Forecast Model (REFM). The REFM forecasts are based on real-time solar wind speed observations at L1. The high reliability of this forecasting tool serves as a benchmark for the assessment of other forecasting tools. Since 2012 the Sheffield SNB3GEO model has been operating online, providing a 24 h ahead forecast of the same fluxes. In addition to solar wind speed, the SNB3GEO forecasts use solar wind density and interplanetary magnetic field B(sub z) observations at L1. The period of joint operation of both of these forecasts has been used to compare their accuracy. Daily averaged measurements of electron fluxes by GOES 13 have been used to estimate the prediction efficiency of both forecasting tools. To assess the reliability of both models to forecast infrequent events of very high fluxes, the Heidke skill score was employed. The results obtained indicate that SNB3GEO provides a more accurate 1 day ahead forecast when compared to REFM. It is shown that the correction methodology utilized by REFM potentially can improve the SNB3GEO forecast.

Comparative analysis of NOAA REFM and SNB3GEO tools for the forecast of the fluxes of high-energy electrons at GEO

Science.gov (United States)

Balikhin, M. A.; Rodriguez, J. V.; Boynton, R. J.; Walker, S. N.; Aryan, H.; Sibeck, D. G.; Billings, S. A.

2016-01-01

Reliable forecasts of relativistic electrons at geostationary orbit (GEO) are important for the mitigation of their hazardous effects on spacecraft at GEO. For a number of years the Space Weather Prediction Center at NOAA has provided advanced online forecasts of the fluence of electrons with energy >2 MeV at GEO using the Relativistic Electron Forecast Model (REFM). The REFM forecasts are based on real-time solar wind speed observations at L1. The high reliability of this forecasting tool serves as a benchmark for the assessment of other forecasting tools. Since 2012 the Sheffield SNB3GEO model has been operating online, providing a 24 h ahead forecast of the same fluxes. In addition to solar wind speed, the SNB3GEO forecasts use solar wind density and interplanetary magnetic field Bz observations at L1.The period of joint operation of both of these forecasts has been used to compare their accuracy. Daily averaged measurements of electron fluxes by GOES 13 have been used to estimate the prediction efficiency of both forecasting tools. To assess the reliability of both models to forecast infrequent events of very high fluxes, the Heidke skill score was employed. The results obtained indicate that SNB3GEO provides a more accurate 1 day ahead forecast when compared to REFM. It is shown that the correction methodology utilized by REFM potentially can improve the SNB3GEO forecast.

OLBS: Offline location based services

OpenAIRE

Coelho, P; Ana Aguiar; João Correia Lopes

2011-01-01

Most existing location-based services rely on ubiquitous connectivity to deliver location-based contents to the users. However, connectivity is not available anywhere at anytime even in urban centres. Underground, indoors, remote areas, and foreign countries are examples situations where users commonly do not have guaranteed connectivity but could profit from location-based contents. In this work, we propose an open platform for publishing, distributing and maintaining location-based contents...

DactyLoc : A minimally geo-referenced WiFi+GSM-fingerprint-based localization method for positioning in urban spaces

DEFF Research Database (Denmark)

Cujia, Kristian; Wirz, Martin; Kjærgaard, Mikkel Baun

2012-01-01

Fingerprinting-based localization methods relying on WiFi and GSM information provide sufficient localization accuracy for many mobile phone applications. Most of the existing approaches require a training set consisting of geo-referenced fingerprints to build a reference database. We propose...... a collaborative, semi-supervised WiFi+GSM fingerprinting method where only a small fraction of all fingerprints needs to be geo-referenced. Our approach enables indexing of areas in the absence of GPS reception as often found in urban spaces and indoors without manual labeling of fingerprints. The method takes...

Geo-Spatial Multi-criteria Analysis for Wave Energy System Deployment

Energy Technology Data Exchange (ETDEWEB)

Nobre, Ana; Pacheco, Miguel (Instituto Hidrografico, Rua das Trinas, 49, Lisboa (PT)); Jorge, Raquel Lopes, M. F. P.; Gato, L. M. C. (IDMEC, Instituto Superior Tecnico, Technical University of Lisbon, Av. Rovisco Pais, Lisboa (PT))

2007-07-01

The growing requirements for renewable energy production lead to the development of a new series of systems, including wave energy conversion systems. Due to their sensitivity and the impact of the aggressive marine environment, the selection of the most adequate location for these systems is a major and very important task. Several factors, such as technological limitations, environmental conditions, administrative and logistic conditions, have to be taken into account in order to support the decision for best location. This paper describes a geo-spatial multi-criteria analysis methodology, based on geographic information systems technology, for selection of the best location to deploy a wave energy farm. This methodology is not conversion system dependent and therefore can be easily customized for different systems and conditions. Selection factors can include, for example, ocean depth, bottom type, underwater cables, marine protected areas, ports location, shoreline, power grid location, military exercise areas, climatology of wave significant height, period and direction. A case study demonstrating this methodology is presented, for an area offshore the Portuguese southwest coast. The system output allows a clear identification of the best spots for a wave energy farm. It is not just a simple Boolean result showing valid and invalid locations, but a layer with a graded suitability for farm deployment.

Nielsen PrimeLocation Web/Desktop: Assessing and GIS Mapping Market Area

Data.gov (United States)

Social Security Administration — Nielsen PrimeLocation Web and Desktop Software Licensed for Internal Use only: Pop-Facts Demographics Database, Geographic Mapping Data Layers, Geo-Coding locations.

GeoLab: A Geological Workstation for Future Missions

Science.gov (United States)

Evans, Cynthia; Calaway, Michael; Bell, Mary Sue; Li, Zheng; Tong, Shuo; Zhong, Ye; Dahiwala, Ravi

2014-01-01

characterization for mission planning, operations, and sample prioritization, 3) evaluate analytical instruments and tools for providing efficient and meaningful data in advance of sample return and 4) identify science operations that leverage human presence with robotic tools. In the first year of tests (2010), GeoLab examined basic glovebox operations performed by one and two crewmembers and science operations performed by a remote science team. The 2010 tests also examined the efficacy of basic sample characterization [descriptions, microscopic imagery, X-ray fluorescence (XRF) analyses] and feedback to the science team. In year 2 (2011), the GeoLab team tested enhanced software and interfaces for the crew and science team (including Web-based and mobile device displays) and demonstrated laboratory configurability with a new diagnostic instrument (the Multispectral Microscopic Imager from the JPL and Arizona State University). In year 3 (2012), the GeoLab team installed and tested a robotic sample manipulator and evaluated robotic-human interfaces for science operations.

Design, Implementation and Applications of 3d Web-Services in DB4GEO

Science.gov (United States)

Breunig, M.; Kuper, P. V.; Dittrich, A.; Wild, P.; Butwilowski, E.; Al-Doori, M.

2013-09-01

The object-oriented database architecture DB4GeO was originally designed to support sub-surface applications in the geo-sciences. This is reflected in DB4GeO's geometric data model as well as in its import and export functions. Initially, these functions were designed for communication with 3D geological modeling and visualization tools such as GOCAD or MeshLab. However, it soon became clear that DB4GeO was suitable for a much wider range of applications. Therefore it is natural to move away from a standalone solution and to open the access to DB4GeO data by standardized OGC web-services. Though REST and OGC services seem incompatible at first sight, the implementation in DB4GeO shows that OGC-based implementation of web-services may use parts of the DB4GeO-REST implementation. Starting with initial solutions in the history of DB4GeO, this paper will introduce the design, adaptation (i.e. model transformation), and first steps in the implementation of OGC Web Feature (WFS) and Web Processing Services (WPS), as new interfaces to DB4GeO data and operations. Among its capabilities, DB4GeO can provide data in different data formats like GML, GOCAD, or DB3D XML through a WFS, as well as its ability to run operations like a 3D-to-2D service, or mesh-simplification (Progressive Meshes) through a WPS. We then demonstrate, an Android-based mobile 3D augmented reality viewer for DB4GeO that uses the Web Feature Service to visualize 3D geo-database query results. Finally, we explore future research work considering DB4GeO in the framework of the research group "Computer-Aided Collaborative Subway Track Planning in Multi-Scale 3D City and Building Models".

Maritime Geo-Fence Letter Report

Science.gov (United States)

2016-07-01

1 Classification | CG-926 RDC | author | audience | month year Maritime Geo-Fence Letter Report Authors: Irene Gonin and Gregory...Johnson   Distribution Statement A: Approved for public release; distribution is unlimited. July 2016 Report No. CG-D-10-16 Maritime Geo-Fence...United States Coast Guard Research & Development Center 1 Chelsea Street New London, CT 06320 Maritime Geo-Fence Letter Report 1

A Novel Location-Awareness Method Using CubeSats for Locating the Spot Beam Emitters of Geostationary Communications Satellites

Directory of Open Access Journals (Sweden)

Weicai Yang

2018-01-01

Full Text Available As more spacecraft are launched into the Geostationary Earth Orbit (GEO belt, the possibility of fatal collisions or unnecessary interference between spacecraft increases. In this paper, a new location-awareness method that uses CubeSats is proposed to assist with radiofrequency (RF domain verification by means of awareness and identification of the positions of the spot beam emitters of communications satellites in geostationary orbit. By flying a CubeSat (or a constellation of CubeSats through the coverage area of a spot beam, the spot beam emitter’s position is identified and the spot beam’s pattern knowledge is characterized. The geometry, the equations of motion of the spacecraft, the measurement process, and the filtering equations in a location system are addressed with respect to the location methods investigated in this study. A realistic scenario in which a CubeSat receives signals from GEO communications satellites is simulated using the Systems Tool Kit (STK. The results of the simulation and the analysis presented in this study provide a thorough verification of the performance of the location-awareness method.

TASK ALLOCATION IN GEO-DISTRIBUTATED CYBER-PHYSICAL SYSTEMS

Energy Technology Data Exchange (ETDEWEB)

Aggarwal, Rachel; Smidts, Carol

2017-03-01

This paper studies the task allocation algorithm for a distributed test facility (DTF), which aims to assemble geo-distributed cyber (software) and physical (hardware in the loop components into a prototype cyber-physical system (CPS). This allows low cost testing on an early conceptual prototype (ECP) of the ultimate CPS (UCPS) to be developed. The DTF provides an instrumentation interface for carrying out reliability experiments remotely such as fault propagation analysis and in-situ testing of hardware and software components in a simulated environment. Unfortunately, the geo-distribution introduces an overhead that is not inherent to the UCPS, i.e. a significant time delay in communication that threatens the stability of the ECP and is not an appropriate representation of the behavior of the UCPS. This can be mitigated by implementing a task allocation algorithm to find a suitable configuration and assign the software components to appropriate computational locations, dynamically. This would allow the ECP to operate more efficiently with less probability of being unstable due to the delays introduced by geo-distribution. The task allocation algorithm proposed in this work uses a Monte Carlo approach along with Dynamic Programming to identify the optimal network configuration to keep the time delays to a minimum.

LOCATION-BASED SERVICES USING SIP

OpenAIRE

Abdullah Azfar,; Md. Sakhawat Hossen,; María José Peroza Marval; Razib Hayat Khan

2010-01-01

Due to the popularity of Location-Based Services and IP telephony, we decided to review a number of different proposals to implement Location-Based Services over a SIP-based mobile network. The result is an interesting overview about the potential functionalities of Location-Based Services and the capabilities of SIP for implementingthese services.

Location-based Scheduling

DEFF Research Database (Denmark)

Andersson, Niclas; Christensen, Knud

on the market. However, CPM is primarily an activity based method that takes the activity as the unit of focus and there is criticism raised, specifically in the case of construction projects, on the method for deficient management of construction work and continuous flow of resources. To seek solutions...... to the identified limitations of the CPM method, an alternative planning and scheduling methodology that includes locations is tested. Location-based Scheduling (LBS) implies a shift in focus, from primarily the activities to the flow of work through the various locations of the project, i.e. the building. LBS uses...... the graphical presentation technique of Line-of-balance, which is adapted for planning and management of work-flows that facilitates resources to perform their work without interruptions caused by other resources working with other activities in the same location. As such, LBS and Lean Construction share...

Multi-User GeoGebra for Virtual Math Teams

Directory of Open Access Journals (Sweden)

Gerry Stahl

2010-05-01

Full Text Available The Math Forum is an online resource center for pre-algebra, algebra, geometry and pre-calculus. Its Virtual Math Teams (VMT service provides an integrated web-based environment for small teams to discuss mathematics. The VMT collaboration environment now includes the dynamic mathematics application, GeoGebra. It offers a multi-user version of GeoGebra, which can be used in concert with VMT’s chat, web browsers, curricula and wiki repository.

Geo synthetic-reinforced Pavement systems

International Nuclear Information System (INIS)

Zornberg, J. G.

2014-01-01

Geo synthetics have been used as reinforcement inclusions to improve pavement performance. while there are clear field evidence of the benefit of using geo synthetic reinforcements, the specific conditions or mechanisms that govern the reinforcement of pavements are, at best, unclear and have remained largely unmeasured. Significant research has been recently conducted with the objectives of: (i) determining the relevant properties of geo synthetics that contribute to the enhanced performance of pavement systems, (ii) developing appropriate analytical, laboratory and field methods capable of quantifying the pavement performance, and (iii) enabling the prediction of pavement performance as a function of the properties of the various types of geo synthetics. (Author)

High power, ultra-broadband supercontinuum source based on highly GeO2 doped silica fiber

DEFF Research Database (Denmark)

Jain, Deepak; Sidharthan, Raghuraman; Moselund, Peter M.

2017-01-01

We demonstrate a 74 mol % GeO2 doped fiber for mid-infrared supercontinuum generation. Experiments ensure a highest output power for a broadest spectrum from 700nm to 3200nm from this fiber, while being pumped by a broadband 4 stage Erbium fiber based MOPA. The effect of repetition rate of pump...

Polymeric synthetic geo membranes in reservoirs waterproofing in the Kingdom of Morocco

International Nuclear Information System (INIS)

Blanco Fernandez, M.

2015-01-01

This essay aims to address some of the aspects related to polymeric synthetic geo membranes that could be used in reservoirs of water located in the Kingdom of Morocco. In this regard, it offers a description of the two basic components geo membranes consist of, that is, resins and additives. It also gives an overview of the key pieces of legislation affecting such an issue. Furthermore, it stresses the paramount importance of implementing monitoring procedures in order to assess the condition of geo membranes over time and, if necessary, to proceed to provide for new waterproofing. Lastly, the characteristics of the process monitoring aforementioned are detailed in terms of tensile strength, elongation, tear resistance, dynamic impact, puncture resistance, low-temperature folding. Shore hardness, stress cracking, oxidation induction times, joint strength shear and peeling test, content and dispersion of carbon black and reflection-optical and scanning-electron microscopy. (Author)

3D GEO-INFORMATION REQUIREMENTS FOR DISASTER AND EMERGENCY MANAGEMENT

Directory of Open Access Journals (Sweden)

E. Demir Ozbek

2016-06-01

Full Text Available A conceptual approach is proposed to define 3D geo-information requirement for different types of disasters. This approach includes components such as Disaster Type-Sector-Actor-Process-Activity-Task-Data. According to disaster types processes, activities, tasks, sectors, and responsible and operational actors are derived. Based on the tasks, the needed level of detail for 3D geo-information model is determined. The levels of detail are compliant with the 3D international standard CityGML. After a brief introduction on the disaster phases and geo-information requirement for actors to perform the tasks, the paper discusses the current situation of disaster and emergency management in Turkey and elaborates on components of conceptual approach. This paper discusses the 3D geo-information requirements for the tasks to be used in the framework of 3D geo-information model for Disaster and Emergency Management System in Turkey. The framework is demonstrated for an industrial fire case in Turkey.

Geo-Proxy-Based Site Classification for Regional Zonation of Seismic Site Effects in South Korea

Directory of Open Access Journals (Sweden)

Chang-Guk Sun

2018-02-01

Full Text Available Seismic site effects and topographic effects related to ground motion occur during an earthquake due to site-specific geotechnical or geological characteristics, including the geological or geographical structure and the characteristics of near-surface sub-soil layers. Site-specific site effects due to geological conditions have been confirmed in recent earthquake events. Earthquake-induced damage has mainly occurred at accumulated soft soil layers under basins or along coasts and rivers. An alternative method has recently been proposed for evaluating regional seismic site effects and amplification factors using digital elevation models (DEM. High-quality DEMs at high resolutions may be employed to resolve finer-scale variations in topographic gradients and consequently, correlated site response parameters. Because there are many regions in South Korea lacking borehole datasets, which are insufficient for site classification only using borehole datasets, a DEM-based proxy for seismic zonation can be effective. Thus, in this study, geo-proxy-based site classification was proposed based on empirical correlations with site response parameters and conducted for regional zonation of seismic site effects to identify the amplification of characteristics in the western metropolitan areas of South Korea, depending on the site-specific geo-spatial conditions.

GeoInquiries: Addressing a Grand Challenge for Teaching with GIS in Schools

Science.gov (United States)

DiBiase, D.; Baker, T.

2016-12-01

According to the National Research Council (2006), geographic information systems (GIS) is a powerful tool for expanding students' abilities to think spatially, a critical skill for future STEM professionals. However, educators in mainstream subjects in U.S. education have struggled for decades to use GIS effectively in classrooms. GeoInquiries are no cost, standards-based (NGSS or AP), Creative Commons-licensed instructional activities that guide inquiry around map-based concepts found in key subjects like Earth and environmental science. Web maps developed for GeoInquiries expand upon printed maps in leading textbooks by taking advantage of 21st GIS capabilities. GeoInquiry collections consist of 15 activities, each chosen to offer a map-based activity every few weeks throughout the school year. GeoInquiries use a common inquiry instructional framework, learned by many educators during their teacher preparation coursework. GeoInquiries are instructionally flexible - acting as much like building blocks for crafting custom activities as finished instructional materials. Over a half million geoinquiries will be accessed in the next twelve months - serving an anticipated 15 million students. After a generation of outreach to the educators, GIS is finally finding its way the mainstream.

Privacy-Preserving Location-Based Services

Science.gov (United States)

Chow, Chi Yin

2010-01-01

Location-based services (LBS for short) providers require users' current locations to answer their location-based queries, e.g., range and nearest-neighbor queries. Revealing personal location information to potentially untrusted service providers could create privacy risks for users. To this end, our objective is to design a privacy-preserving…

Evaluation Of Geo-Spatial Proximity Of Mobile Communication GSM Base Transceiver Stations To Buildings In Ile-Ife Nigeria

Directory of Open Access Journals (Sweden)

Badru

2015-08-01

Full Text Available Efficient placement of radio facilities for the communication base transceiver station CBS of the two small global system for mobile communication GSM has being an area of research due to fast growing of GSM market in Nigeria. In line with this development Nigerian Communication Commission NCC and Nigeria Environmental Standard and Regulation Enforcement Agency NESREA have stated the setback between communication base station and the nearest infrastructure as 5 m and 10 m respectively. To evaluate the degree of the implementation of these setbacks in Ile-Ife the study area the research study identified the spatial locations of the CBS using a global communication for satellite GPS receiver and also employed the use of a high resolution satellite imagery which were processed using geo-spatial techniques. The results of this study revealed that 45.6 and 59.5 of the CBS had setback to building structures at 5 m and 10 m respectively with spatial variability between 30 m to 17074 m at elevation between 193 m to 377 m.

Probe into geo-information science and information science in nuclear and geography science in China

International Nuclear Information System (INIS)

Tang Bin

2001-01-01

In the past ten years a new science-Geo-Information Science, a branch of Geoscience, developed very fast, which has been valued and paid much attention to. Based on information science, the author analyzes the flow of material, energy, people and information and their relations, presents the place of Geo-Information Science in Geo-science and its content from Geo-Informatics, Geo-Information technology and the application of itself. Finally, the author discusses the main content and problem existed in Geo-Information Science involved in Nuclear and Geography Science

Develop Direct Geo-referencing System Based on Open Source Software and Hardware Platform

Directory of Open Access Journals (Sweden)

H. S. Liu

2015-08-01

Full Text Available Direct geo-referencing system uses the technology of remote sensing to quickly grasp images, GPS tracks, and camera position. These data allows the construction of large volumes of images with geographic coordinates. So that users can be measured directly on the images. In order to properly calculate positioning, all the sensor signals must be synchronized. Traditional aerial photography use Position and Orientation System (POS to integrate image, coordinates and camera position. However, it is very expensive. And users could not use the result immediately because the position information does not embed into image. To considerations of economy and efficiency, this study aims to develop a direct geo-referencing system based on open source software and hardware platform. After using Arduino microcontroller board to integrate the signals, we then can calculate positioning with open source software OpenCV. In the end, we use open source panorama browser, panini, and integrate all these to open source GIS software, Quantum GIS. A wholesome collection of data – a data processing system could be constructed.

Develop Direct Geo-referencing System Based on Open Source Software and Hardware Platform

Science.gov (United States)

Liu, H. S.; Liao, H. M.

2015-08-01

Direct geo-referencing system uses the technology of remote sensing to quickly grasp images, GPS tracks, and camera position. These data allows the construction of large volumes of images with geographic coordinates. So that users can be measured directly on the images. In order to properly calculate positioning, all the sensor signals must be synchronized. Traditional aerial photography use Position and Orientation System (POS) to integrate image, coordinates and camera position. However, it is very expensive. And users could not use the result immediately because the position information does not embed into image. To considerations of economy and efficiency, this study aims to develop a direct geo-referencing system based on open source software and hardware platform. After using Arduino microcontroller board to integrate the signals, we then can calculate positioning with open source software OpenCV. In the end, we use open source panorama browser, panini, and integrate all these to open source GIS software, Quantum GIS. A wholesome collection of data - a data processing system could be constructed.

The GeoSteiner software package for computing Steiner trees in the plane

DEFF Research Database (Denmark)

Juhl, Daniel; Warme, David M.; Winter, Pawel

The GeoSteiner software package has for more than 10 years been the fastest (publicly available) program for computing exact solutions to Steiner tree problems in the plane. The computational study by Warme, Winter and Zachariasen, published in 2000, documented the performance of the GeoSteiner...... approach --- allowing the exact solution of Steiner tree problems with more than a thousand terminals. Since then, a number of algorithmic enhancements have improved the performance of the software package significantly. In this computational study we run the current code on the largest problem instances...... from the 2000-study, and on a number of larger problem instances. The computational study is performed using both the publicly available GeoSteiner 3.1 code base, and the commercial GeoSteiner 4.0 code base....

An integrated risk sensing system for geo-structural safety

Institute of Scientific and Technical Information of China (English)

H.W. Huang; D.M. Zhang; B.M. Ayyub

2017-01-01

Over the last decades, geo-structures are experiencing a rapid development in China. The potential risks inherent in the huge amount of construction and asset operation projects in China were well managed in the major project, i.e. the project of Shanghai Yangtze tunnel in 2002. Since then, risk assessment of geo-structures has been gradually developed from a qualitative manner to a quantitative manner. However, the current practices of risk management have been paid considerable attention to the assessment, but little on risk control. As a result, the responses to risks occurrences after a comprehensive assessment are basically too late. In this paper, a smart system for risk sensing incorporating the wireless sensor network (WSN) on-site visualization techniques and the resilience-based repair strategy was proposed. The merit of this system is the real-time monitoring for geo-structural performance and dynamic pre-warning for safety of on-site workers. The sectional convergence, joint opening, and seepage of segmental lining of shield tunnel were monitored by the micro-electro-mechanical systems (MEMS) based sensors. The light emitting diode (LED) coupling with the above WSN system was used to indicate different risk levels on site. By sensing the risks and telling the risks in real time, the geo-risks could be controlled and the safety of geo-structures could be assured to a certain degree. Finally, a resilience-based analysis model was proposed for designing the repair strategy by using the measured data from the WSN system. The application and efficiency of this system have been validated by two cases including Shanghai metro tunnel and underwater road tunnel.

Synthesis of organic liquids/geo-polymer composites for the immobilization of nuclear wastes

International Nuclear Information System (INIS)

Cantarel, Vincent

2016-01-01

This work is included in the management of radioactive organic liquids research field. The process is based on an emulsification of organic liquid in an alkali silicate solution allowing the synthesis of a geo-polymer matrix. The first part of this work consists in carrying out a screening on different organic liquids. A model system representative of the various oils and a geo-polymer reference formulation are then defined. The second part deals with the structuration of the organic liquid/geo-polymer structuration, from the mixture of the reactants to the final material. It aims at determining the phenomena allowing the synthesis of a homogeneous composite. The last two parts aim at characterizing the composite by studying its structure (chemical structure, porosity of the geo-polymer and dispersion of the oil) and its properties with respect to the application to the immobilization of radioactive waste. Unlike calcium silicate-based cementitious matrices, the structure of the geo-polymer is not affected by the chemical nature of the organic liquids. Only acid oils inhibit or slow down the geo-polymerization reaction. In order to obtain a homogeneous material, the presence of surfactant molecules is necessary. The emulsion stabilization mechanism at the base of the process is relying on a synergy between the surfactant molecules and the aluminosilicate particles present in the geo-polymer paste. The kinetics (chemical and mechanical) of the geo-polymerization are not impacted by the presence of oil or surfactants. Only an increase in the viscoelastic moduli and the elastic character of the pastes can be observed. This difference in rheological behavior is mainly due to the presence of surfactant. The structure of the matrix is identical to that of a pure geo-polymer of the same formulation. The organic liquid is dispersed in spherical inclusions whose radius is between 5 and 15 μm. These droplets are separated from each other, and from the environment by the

GLPP: A Game-Based Location Privacy-Preserving Framework in Account Linked Mixed Location-Based Services

Directory of Open Access Journals (Sweden)

Zhuo Ma

2018-01-01

Full Text Available In Location-Based Services (LBSs platforms, such as Foursquare and Swarm, the submitted position for a share or search leads to the exposure of users’ activities. Additionally, the cross-platform account linkage could aggravate this exposure, as the fusion of users’ information can enhance inference attacks on users’ next submitted location. Hence, in this paper, we propose GLPP, a personalized and continuous location privacy-preserving framework in account linked platforms with different LBSs (i.e., search-based LBSs and share-based LBSs. The key point of GLPP is to obfuscate every location submitted in search-based LBSs so as to defend dynamic inference attacks. Specifically, first, possible inference attacks are listed through user behavioral analysis. Second, for each specific attack, an obfuscation model is proposed to minimize location privacy leakage under a given location distortion, which ensures submitted locations’ utility for search-based LBSs. Third, for dynamic attacks, a framework based on zero-sum game is adopted to joint specific obfuscation above and minimize the location privacy leakage to a balanced point. Experiments on real dataset prove the effectiveness of our proposed attacks in Accuracy, Certainty, and Correctness and, meanwhile, also show the performance of our preserving solution in defense of attacks and guarantee of location utility.

The Geo/Geo/1+1 Queueing System with Negative Customers

OpenAIRE

Ma, Zhanyou; Guo, Yalin; Wang, Pengcheng; Hou, Yumei

2013-01-01

We study a Geo/Geo/1+1 queueing system with geometrical arrivals of both positive and negative customers in which killing strategies considered are removal of customers at the head (RCH) and removal of customers at the end (RCE). Using quasi-birth-death (QBD) process and matrix-geometric solution method, we obtain the stationary distribution of the queue length, the average waiting time of a new arrival customer, and the probabilities of servers in busy or idle period, respectively. Finally, ...

Geo-electrical and geological strikes of the Mount Lamongan geothermal area, East Java, Indonesia – preliminary results

Science.gov (United States)

Nugraheni, L. R.; Niasari, S. W.; Nukman, M.

2018-04-01

Geothermal manifestations located in the Tiris, Mount Lamongan, Probolinggo, consist of warm springs. These warm springs have temperature from 35° until 45°C. Tiris fault has NW-SE dominant orientation, similar to some lineaments of maars and cinder cones around Mount Lamongan. The Mount Lamongan geothermal area is situated between Bromo and Argapura volcanoes. This study aims to map the geo-electrical and geological strikes in the study area. Phase tensor analysis has been performed in this study to determine geo-electrical strike of study area. Geological field campaign has been conducted to measure geological strikes. Then, orientation of geo-electrical strike was compared to geological strike. The result presents that the regional geological strike of study area is NW-SE while the orientation of geo-electrical strike is N-S.

Geo-collaboration under stress

NARCIS (Netherlands)

Looije, R.; Brake, G.M. te; Neerincx, M.A.

2007-01-01

“Most of the science and decision making involved in geo-information is the product of collaborative teams. Current geospatial technologies are a limiting factor because they do not provide any direct support for group efforts. In this paper we present a method to enhance geo-collaboration by

GEO Supersites Data Exploitation Platform

Science.gov (United States)

Lengert, W.; Popp, H.-J.; Gleyzes, J.-P.

2012-04-01

In the framework of the GEO Geohazard Supersite initiative, an international partnership of organizations and scientists involved in the monitoring and assessment of geohazards has been established. The mission is to advance the scientific understanding of geohazards by improving geohazard monitoring through the combination of in-situ and space-based data, and by facilitating the access to data relevant for geohazard research. The stakeholders are: (1) governmental organizations or research institutions responsible for the ground-based monitoring of earthquake and volcanic areas, (2) space agencies and satellite operators providing satellite data, (3) the global geohazard scientific community. The 10.000's of ESA's SAR products are accessible, since beginning 2008, using ESA's "Virtual Archive", a Cloud Computing assets, allowing the global community an utmost downloading performance of these high volume data sets for mass-market costs. In the GEO collaborative context, the management of ESA's "Virtual Archive" and the ordering of these large data sets is being performed by UNAVCO, who is also coordinating the data demand for the several hundreds of co-PIs. ESA is envisaging to provide scientists and developers access to a highly elastic operational e-infrastructure, providing interdisciplinary data on a large scale as well as tools ensuring innovation and a permanent evolution of the products. Consequently, this science environment will help in defining and testing new applications and technologies fostering innovation and new science findings. In Europe, the collaboration between EPOS, "European Plate Observatory System" lead by INGV, and ESA with support of DLR, ASI, and CNES are the main institutional stakeholders for the GEO Supersites contributing also to a unifying e-infrastructure. The overarching objective of the Geohazard Supersites is: "To implement a sustainable Global Earthquake Observation System and a Global Volcano Observation System as part of the

Location-based prospective memory.

Science.gov (United States)

O'Rear, Andrea E; Radvansky, Gabriel A

2018-02-01

This study explores location-based prospective memory. People often have to remember to do things when in a particular location, such as buying tissues the next time they are in the supermarket. For event cognition theory, location is important for structuring events. However, because event cognition has not been used to examine prospective memory, the question remains of how multiple events will influence prospective memory performance. In our experiments, people delivered messages from store to store in a virtual shopping mall as an ongoing task. The prospective tasks were to do certain activities in certain stores. For Experiment 1, each trial involved one prospective memory task to be done in a single location at one of three delays. The virtual environment and location cues were effective for prospective memory, and performance was unaffected by delay. For Experiment 2, each trial involved two prospective memory tasks, given in either one or two instruction locations, and to be done in either one or two store locations. There was improved performance when people received instructions from two locations and did both tasks in one location relative to other combinations. This demonstrates that location-based event structure influences how well people perform on prospective memory tasks.

[Brief introduction of geo-authentic herbs].

Science.gov (United States)

Liang, Fei; Li, Jian; Zhang, Wei; Zhang, Rui-Xian

2013-05-01

The science of geo-authentic herbs is a characteristic discipline of traditional Chinese medicine established during thousands of years of clinical practices. It has a long history under the guidance of profound theories of traditional Chinese medicine. The words of "geo-authentic product" were derived from an administrative division unit in the ancient times, which layed stress on the good quality of products in particular regions. In ancient records of traditional Chinese medicine, the words of "geo-authentic product" were first found in Concise Herbal Foundation Compilation of the Ming dynasty, and the words of "geo-authentic herbs" were first discovered in Peony Pavilion of the late Ming dynasty. After all, clinical effect is the fundamental evaluation standard of geo-authentic herbs.

The Group on Earth Observations (GEO) through 2025

Science.gov (United States)

Ryan, Barbara; Cripe, Douglas

Ministers from the Group on Earth Observations (GEO) Member governments, meeting in Geneva, Switzerland in January 2014, unanimously renewed the mandate of GEO through 2025. Through a Ministerial Declaration, they reconfirmed that GEO’s guiding principles of collaboration in leveraging national, regional and global investments and in developing and coordinating strategies to achieve full and open access to Earth observations data and information in order to support timely and knowledge-based decision-making - are catalysts for improving the quality of life of people around the world, advancing global sustainability, and preserving the planet and its biodiversity. GEO Ministers acknowledged and valued the contributions of GEO Member governments and invited all remaining Member States of the United Nations to consider joining GEO. The Ministers also encouraged all Members to strengthen national GEO arrangements, and - of particular interest to COSPAR - they highlighted the unique contributions of Participating Organizations. In this regard, ten more organizations saw their applications approved by Plenary and joined the ranks along with COSPAR to become a Participating Organization in GEO, bringing the current total to 77. Building on the efforts of a Post-2015 Working Group, in which COSPAR participated, Ministers provided additional guidance for GEO and the evolution of its Global Earth Observation System of System (GEOSS) through 2025. Five key areas of activities for the next decade include the following: 1.) Advocating for the value of Earth observations and the need to continue improving Earth observation worldwide; 2.) Urging the adoption and implementation of data sharing principles globally; 3.) Advancing the development of the GEOSS information system for the benefit of users; 4.) Developing a comprehensive interdisciplinary knowledge base defining and documenting observations needed for all disciplines and facilitate availability and accessibility of

Incorporation of Spatial Interactions in Location Networks to Identify Critical Geo-Referenced Routes for Assessing Disease Control Measures on a Large-Scale Campus

Directory of Open Access Journals (Sweden)

Tzai-Hung Wen

2015-04-01

Full Text Available Respiratory diseases mainly spread through interpersonal contact. Class suspension is the most direct strategy to prevent the spread of disease through elementary or secondary schools by blocking the contact network. However, as university students usually attend courses in different buildings, the daily contact patterns on a university campus are complicated, and once disease clusters have occurred, suspending classes is far from an efficient strategy to control disease spread. The purpose of this study is to propose a methodological framework for generating campus location networks from a routine administration database, analyzing the community structure of the network, and identifying the critical links and nodes for blocking respiratory disease transmission. The data comes from the student enrollment records of a major comprehensive university in Taiwan. We combined the social network analysis and spatial interaction model to establish a geo-referenced community structure among the classroom buildings. We also identified the critical links among the communities that were acting as contact bridges and explored the changes in the location network after the sequential removal of the high-risk buildings. Instead of conducting a questionnaire survey, the study established a standard procedure for constructing a location network on a large-scale campus from a routine curriculum database. We also present how a location network structure at a campus could function to target the high-risk buildings as the bridges connecting communities for blocking disease transmission.

GeoPro: Technology to Enable Scientific Modeling

International Nuclear Information System (INIS)

C. Juan

2004-01-01

Development of the ground-water flow model for the Death Valley Regional Groundwater Flow System (DVRFS) required integration of numerous supporting hydrogeologic investigations. The results from recharge, discharge, hydraulic properties, water level, pumping, model boundaries, and geologic studies were integrated to develop the required conceptual and 3-D framework models, and the flow model itself. To support the complex modeling process and the needs of the multidisciplinary DVRFS team, a hardware and software system called GeoPro (Geoscience Knowledge Integration Protocol) was developed. A primary function of GeoPro is to manage the large volume of disparate data compiled for the 100,000-square-kilometer area of southern Nevada and California. The data are primarily from previous investigations and regional flow models developed for the Nevada Test Site and Yucca Mountain projects. GeoPro utilizes relational database technology (Microsoft SQL Server(trademark)) to store and manage these tabular point data, groundwater flow model ASCII data, 3-D hydrogeologic framework data, 2-D and 2.5-D GIS data, and text documents. Data management consists of versioning, tracking, and reporting data changes as multiple users access the centralized database. GeoPro also supports the modeling process by automating the routine data transformations required to integrate project software. This automation is also crucial to streamlining pre- and post-processing of model data during model calibration. Another function of GeoPro is to facilitate the dissemination and use of the model data and results through web-based documents by linking and allowing access to the underlying database and analysis tools. The intent is to convey to end-users the complex flow model product in a manner that is simple, flexible, and relevant to their needs. GeoPro is evolving from a prototype system to a production-level product. Currently the DVRFS pre- and post-processing modeling tools are being re

Integrating Non-Spatial Preferences into Spatial Location Queries

DEFF Research Database (Denmark)

Qu, Qiang; Liu, Siyuan; Yang, Bin

2014-01-01

Increasing volumes of geo-referenced data are becoming available. This data includes so-called points of interest that describe businesses, tourist attractions, etc. by means of a geo-location and properties such as a textual description or ratings. We propose and study the efficient implementation...... of a new kind of query on points of interest that takes into account both the locations and properties of the points of interest. The query takes a result cardinality, a spatial range, and property-related preferences as parameters, and it returns a compact set of points of interest with the given...... cardinality and in the given range that satisfies the preferences. Specifically, the points of interest in the result set cover so-called allying preferences and are located far from points of interest that possess so-called alienating preferences. A unified result rating function integrates the two kinds...

Geo textiles and related products used in the waterproofing of reservoirs. Situation in Morocco; Geotextiles y productos relacionados utilizados en la impermeabilizacion de balsas. Situacion en Marruecos

Energy Technology Data Exchange (ETDEWEB)

Leiro Lopez, A.; Mateo Sanz, B.

2015-07-01

The aim of this paper is to describe the geo textiles, and products related to geo textiles, used for the building of water-storage reservoirs, which can be applicable to the construction of this kind of structures in Morocco. It presents different types of geo textiles and related products most commonly used in reservoirs, such as geo nets, geo grids, geo mats and geo composites, describing their characteristics and experimental methodology. Furthermore, and drawing on the Spanish Manual for Design, Construction, Operation and Maintenance of Reservoirs, emphasis is placed on the functions that geo synthetics can perform, such as protection and filter in the case of geo textiles, and drainage in the case of geo nets and draining composites. Finally, several works of this sort of structures located in Morocco are cited. (Author)

The Features of Geo-Ecological Assessment within the Geo-Eco-Socio-Economic Approach to the Development of Northern Territories

Directory of Open Access Journals (Sweden)

Aleksander Ivanovich Semyachkov

2015-12-01

Full Text Available In modern conditions, for the purpose of preservation a territory’s ecosystem at its involvement in economic circulation, it is necessary to carry out the anticipatory geo-ecological assessment for indicating the degree of resistance to hypothetical anthropogenic influence. The existing methodological approaches for performing the geo-ecological assessment are unified and can often be equally applied to various types of territories. A new methodical approach for geo-ecological assessment is brought forth in the article. It takes into account the specific character of the Ural region’s northern territories. The approach is based on the point assessment of territory, which is explained by its large area, moreover, the point assessment is proposed to carry out before the development of the territory. This approach makes possible to consider the specific features of the territory’s ecosystem, namely its ability for self-restoration and self-cleaning in the process of economic development and after it. It allows carrying out the choice of economic activity direction on the whole and satisfying the condition of the minimization of the damage from violation the territory’s ecosystem and preservation its resource potential. The research results can be utilized in the studies of experts and students working on the geo-ecological assessment of territory

Learning fraction comparison by using a dynamic mathematics software - GeoGebra

Science.gov (United States)

Poon, Kin Keung

2018-04-01

GeoGebra is a mathematics software system that can serve as a tool for inquiry-based learning. This paper deals with the application of a fraction comparison software, which is constructed by GeoGebra, for use in a dynamic mathematics environment. The corresponding teaching and learning issues have also been discussed.

Learning Fraction Comparison by Using a Dynamic Mathematics Software--GeoGebra

Science.gov (United States)

Poon, Kin Keung

2018-01-01

GeoGebra is a mathematics software system that can serve as a tool for inquiry-based learning. This paper deals with the application of a fraction comparison software, which is constructed by GeoGebra, for use in a dynamic mathematics environment. The corresponding teaching and learning issues have also been discussed.

Pricing Analysis in Geo/Geo/1 Queueing System

Directory of Open Access Journals (Sweden)

Yan Ma

2015-01-01

Full Text Available This paper studies the equilibrium behavior of customers and optimal pricing strategies of servers in a Geo/Geo/1 queueing system. Two common pricing mechanisms are considered. The first one is called ex-post payment (EPP scheme where the server collects tolls proportional to queue times, and the second one is called ex-ante payment (EAP scheme where the server charges a flat fee for the total service. The server sets the toll price to maximize its own profit. It is found that, under a customer’s choice equilibrium, the two toll mechanisms are equivalent from the economic point of view. Finally, we present several numerical experiments to investigate the effects of system parameters on the equilibrium customer joining rate and servers’ profits.

Teaching Plate Tectonic Concepts using GeoMapApp Learning Activities

Science.gov (United States)

Goodwillie, A. M.; Kluge, S.

2012-12-01

GeoMapApp Learning Activities ( http://serc.carleton.edu/geomapapp/collection.html ) can help educators to expose undergraduate students to a range of earth science concepts using high-quality data sets in an easy-to-use map-based interface called GeoMapApp. GeoMapApp Learning Activities require students to interact with and analyse research-quality geoscience data as a means to explore and enhance their understanding of underlying content and concepts. Each activity is freely available through the SERC-Carleton web site and offers step-by-step student instructions and answer sheets. Also provided are annotated educator versions of the worksheets that include teaching tips, additional content and suggestions for further work. The activities can be used "off-the-shelf". Or, since the educator may require flexibility to tailor the activities, the documents are provided in Word format for easy modification. Examples of activities include one on the concept of seafloor spreading that requires students to analyse global seafloor crustal age data to calculate spreading rates in different ocean basins. Another activity has students explore hot spots using radiometric age dating of rocks along the Hawaiian-Emperor seamount chain. A third focusses upon the interactive use of contours and profiles to help students visualise 3-D topography on 2-D computer screens. A fourth activity provides a study of mass wasting as revealed through geomorphological evidence. The step-by-step instructions and guided inquiry approach reduce the need for teacher intervention whilst boosting the time that students can spend on productive exploration and learning. The activities can be used, for example, in a classroom lab with the educator present and as self-paced assignments in an out-of-class setting. GeoMapApp Learning Activities are funded through the NSF GeoEd program and are aimed at students in the introductory undergraduate, community college and high school levels. The activities are

The Distributed Geothermal Market Demand Model (dGeo): Documentation

Energy Technology Data Exchange (ETDEWEB)

McCabe, Kevin [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Mooney, Meghan E [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Sigrin, Benjamin O [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Gleason, Michael [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Liu, Xiaobing [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2017-11-06

The National Renewable Energy Laboratory (NREL) developed the Distributed Geothermal Market Demand Model (dGeo) as a tool to explore the potential role of geothermal distributed energy resources (DERs) in meeting thermal energy demands in the United States. The dGeo model simulates the potential for deployment of geothermal DERs in the residential and commercial sectors of the continental United States for two specific technologies: ground-source heat pumps (GHP) and geothermal direct use (DU) for district heating. To quantify the opportunity space for these technologies, dGeo leverages a highly resolved geospatial database and robust bottom-up, agent-based modeling framework. This design is consistent with others in the family of Distributed Generation Market Demand models (dGen; Sigrin et al. 2016), including the Distributed Solar Market Demand (dSolar) and Distributed Wind Market Demand (dWind) models. dGeo is intended to serve as a long-term scenario-modeling tool. It has the capability to simulate the technical potential, economic potential, market potential, and technology deployment of GHP and DU through the year 2050 under a variety of user-defined input scenarios. Through these capabilities, dGeo can provide substantial analytical value to various stakeholders interested in exploring the effects of various techno-economic, macroeconomic, financial, and policy factors related to the opportunity for GHP and DU in the United States. This report documents the dGeo modeling design, methodology, assumptions, and capabilities.

The geo-genic radon potential map of the aspiring 'Buzau Land' Geo-park

International Nuclear Information System (INIS)

Moldovan, M. C.; Burghele, B. D.; Roba, C. A.; Sferle, T. L.; Buterez, C.; Mitrofan, H.

2017-01-01

Mapping the geo-genic radon potential in Buzau County is part of a research project aiming to apply research for sustainable development and economic growth following the principles of geo-conservation in order to support the 'Buzau Land' UNESCO Geo-park initiative. The mapping of geo-genic radon will be used as an overview for planning purposes. The main geological formations of the studied area were identified as Cretaceous and Paleogene flysch, included in a thin-skinned nappes pile and consisting of alternating sandstones, marls, clays and, subordinately, conglomerates, all tightly folded or faulted. Significant variations in the concentration of radon were therefore determined in the ground. However, no high values were determined, the maximum measured activity concentration being 101.6 kBq m -3 . (authors)

Correcting Spatial Variance of RCM for GEO SAR Imaging Based on Time-Frequency Scaling

Science.gov (United States)

Yu, Ze; Lin, Peng; Xiao, Peng; Kang, Lihong; Li, Chunsheng

2016-01-01

Compared with low-Earth orbit synthetic aperture radar (SAR), a geosynchronous (GEO) SAR can have a shorter revisit period and vaster coverage. However, relative motion between this SAR and targets is more complicated, which makes range cell migration (RCM) spatially variant along both range and azimuth. As a result, efficient and precise imaging becomes difficult. This paper analyzes and models spatial variance for GEO SAR in the time and frequency domains. A novel algorithm for GEO SAR imaging with a resolution of 2 m in both the ground cross-range and range directions is proposed, which is composed of five steps. The first is to eliminate linear azimuth variance through the first azimuth time scaling. The second is to achieve RCM correction and range compression. The third is to correct residual azimuth variance by the second azimuth time-frequency scaling. The fourth and final steps are to accomplish azimuth focusing and correct geometric distortion. The most important innovation of this algorithm is implementation of the time-frequency scaling to correct high-order azimuth variance. As demonstrated by simulation results, this algorithm can accomplish GEO SAR imaging with good and uniform imaging quality over the entire swath. PMID:27428974

GeoXp : An R Package for Exploratory Spatial Data Analysis

Directory of Open Access Journals (Sweden)

Thibault Laurent

2012-04-01

Full Text Available We present GeoXp, an R package implementing interactive graphics for exploratory spatial data analysis. We use a data set concerning public schools of the French MidiPyrenees region to illustrate the use of these exploratory techniques based on the coupling between a statistical graph and a map. Besides elementary plots like boxplots,histograms or simple scatterplots, GeoXp also couples maps with Moran scatterplots, variogram clouds, Lorenz curves and other graphical tools. In order to make the most of the multidimensionality of the data, GeoXp includes dimension reduction techniques such as principal components analysis and cluster analysis whose results are also linked to the map.

A Geo-Aware Taxi Carrying Management System by Using Location Based Services and Zone Queuing Techniques on Internet of Things

Directory of Open Access Journals (Sweden)

Chyi-Ren Dow

2016-01-01

Full Text Available Taxi plays a crucial role in the transportation system because of the characteristic that can be hailed conveniently. Most of the taxi drivers obtain passengers by hunting on the road or waiting in a fixed taxi queuing point; however these methods have poor performance, high vacancy rate, and several critical problems such as air pollution and foul up traffic. This study proposed a taxi carrying management system by using location based services and zone queuing techniques on Internet of things. The proposed system allows drivers to both hunt on the road and wait in a queuing zone. A queuing table is used in the control center and neighbor tables are used in RSUs for zone queuing establishment. Joining and leaving mechanisms are developed for zone queuing management. To enhance service efficiency and quality, we present a scheme to prevent the ping-pong effect which is based on the location based services, a hunting rate calculation scheme, and a path planning service for taxi drivers according to the history carrying record. PRISM is used to simulate the proposed system, and the results indicated that our scheme outperforms the waiting and hunting models in terms of number of customers, vacancy rate, and profit.

Observation of GEO Satellite Above Thailand’s Sky

Science.gov (United States)

Kasonsuwan, K.; Wannawichian, S.; Kirdkao, T.

2017-09-01

The direct observations of Geostationary Orbit (GEO) satellites above Thailand’s sky by 0.7-meters telescope were proceeded at Inthanon Mt., Chiang Mai, Thailand. The observation took place at night with Sidereal Stare Mode (SSM). With this observing mode, the moving object will appear as a streak. The star identification for image calibration is based on (1) a star catalogue, (2) the streak detection of the satellite using the software and (3) the extraction of the celestial coordinate of the satellite as a predicted position. Finally, the orbital elements for GEO satellites were calculated.

Fluid migration through geo-membrane seams and through the interface between geo-membrane and geo-synthetic clay liner; Contribution a l'etude des transferts de masse au niveau des joints de geomembrane et a l'interface entre geomembrane et geosynthetique bentonitique

Energy Technology Data Exchange (ETDEWEB)

Barroso, M

2005-03-15

carried out both in laboratory and in field conditions to study the suitability of this test to assess the quality of the seams in situ. The results obtained suggest that it is possible to assess the quality of the geo-membrane seams from a non-destructive test conducted in situ by determining the time constant. To address the problem of fluid migration through geo-membrane defects, composite liners comprising a geo-membrane with a circular hole over a GCL over a CCL were simulated in tests at three scales. Flow rates at the interface between the geo-membrane and the GCL were measured. Correspondent interface transmissivity was estimated based on final flow rates and observation of the wetted area. A parametric study was performed to evaluate the influence of the pre-hydration of the GCL, the hydraulic head on top of the liner and the confining stress over the liner system, on the flow rate through composite liners due to defects in the geo-membrane, as well as to check the feasibility of an extrapolation of the results obtained on small-scale tests to field conditions. It was found that the transmissivity does not seem to be affected by the pre-hydration of the GCLs when low confining stresses were used. It also does not seem to be influenced by the increase in confining stress when non-pre-hydrated GCLs are used. Finally, the transmissivity does not seem to be significantly affected by the increase in hydraulic head. The results also suggest that predictions on flow rates though composite liners due to defects in the geo-membrane, which are based on transmissivity values obtained in small scale tests, are conservative. Lastly, based on the transmissivities obtained in this study, empirical equations for predicting the flow rate through composite liners consisting of a geo-membrane over a GCL over a CCL are proposed. Flow rates calculated using these equations are in better agreement with the flow rates measured experimentally than the empirical equations reported in

User Defined Geo-referenced Information

DEFF Research Database (Denmark)

Konstantas, Dimitri; Villalba, Alfredo; di Marzo Serugendo, Giovanna

2009-01-01

. In this paper we present two novel mobile and wireless collaborative services and concepts, the Hovering Information, a mobile, geo-referenced content information management system, and the QoS Information service, providing user observed end-to-end infrastructure geo-related QoS information....

Chlorine isotopes potential as geo-chemical tracers

Digital Repository Service at National Institute of Oceanography (India)

Shirodkar, P.V.; Pradhan, U.K.; Banerjee, R.

The potential of chlorine isotopes as tracers of geo-chemical processes of earth and the oceans is highlighted based on systematic studies carried out in understanding the chlorine isotope fractionation mechanism, its constancy in seawater and its...

GEOS-5 Chemistry Transport Model User's Guide

Science.gov (United States)

Kouatchou, J.; Molod, A.; Nielsen, J. E.; Auer, B.; Putman, W.; Clune, T.

2015-01-01

The Goddard Earth Observing System version 5 (GEOS-5) General Circulation Model (GCM) makes use of the Earth System Modeling Framework (ESMF) to enable model configurations with many functions. One of the options of the GEOS-5 GCM is the GEOS-5 Chemistry Transport Model (GEOS-5 CTM), which is an offline simulation of chemistry and constituent transport driven by a specified meteorology and other model output fields. This document describes the basic components of the GEOS-5 CTM, and is a user's guide on to how to obtain and run simulations on the NCCS Discover platform. In addition, we provide information on how to change the model configuration input files to meet users' needs.

Geo electrical Resistivity Survey for Ancient Tunnel Detection at Bukit Tenggek, Setiu, Terengganu

International Nuclear Information System (INIS)

Siti Nazira Masrom; Mohd Hariri Arifin; Abd Rahim Harun; Abdul Rahim Samsudin

2011-01-01

Geo electrical resistivity survey was conducted in the Bukit Tenggek, Setiu, Terengganu to detect the possible existence of an ancient tunnel which is believed to be in the area. Geo electrical resistivity method was found very effective in searching for archaeological exploration and underground structures (tunnels and artifacts). Geo electrical resistivity survey was carried out using Terrameter ABEM SAS1000 and Wenner array electrode configuration. The survey area is located in a damp valley with a stream across the region. 2-D resistivity image showed the existence of anomalies in several areas that can be associated with the structure. Low resistivity value represents the estimated existence of the old tunnel, while isolated rounded anomalies are believed to be associated with barrels/artifacts. 3-D resistivity profiles, shows anomalies that may be caused by the existence of a horizontal and two vertical tunnels (shaft). However, the drillings work need to be done to figure out the exact cause of these anomalies. (author)

Geo-spatial multi-criteria analysis for wave energy conversion system deployment

Energy Technology Data Exchange (ETDEWEB)

Nobre, Ana; Pacheco, Miguel [Data Centre, Instituto Hidrografico, Portuguese Navy, Rua das Trinas 49, 1249-093 Lisboa (Portugal); Jorge, Raquel; Lopes, M.F.P.; Gato, L.M.C. [IDMEC, Instituto Superior Tecnico, Technical University of Lisbon, Avenida Rovisco Pais 1, 1049-001, Lisboa (Portugal)

2009-01-15

The growing requirements for renewable energy production lead to the development of a new series of systems, including wave energy conversion systems. Due to their sensitivity and the impact of the aggressive marine environment, the selection of the most adequate location for these systems is a major and very important task. Several factors, such as technological limitations, environmental conditions, administrative and logistic conditions, have to be taken into account in order to support the decision for best location. This paper describes a geo-spatial multi-criteria analysis methodology, based on geographic information systems technology, for identification of the best location to deploy a wave energy farm. This methodology is not conversion system dependent and therefore can be easily customized for different systems and implementation conditions. Selection factors can include, for example, ocean depth, sea bottom type, existing underwater cables, marine protected areas, ports location, shoreline, power grid location, military exercise areas, climatology of wave significant height, period and power. A case study demonstrating this methodology is presented, for an area offshore the Portuguese southwest coast. The system output allows a clear differential identification of the best spots for implementing a wave energy farm. It is not just a simple Boolean result showing valid and invalid locations, but a layer with a valued suitability for farm deployment. (author)

Active Collection of Land Cover Sample Data from Geo-Tagged Web Texts

Directory of Open Access Journals (Sweden)

Dongyang Hou

2015-05-01

Full Text Available Sample data plays an important role in land cover (LC map validation. Traditionally, they are collected through field survey or image interpretation, either of which is costly, labor-intensive and time-consuming. In recent years, massive geo-tagged texts are emerging on the web and they contain valuable information for LC map validation. However, this kind of special textual data has seldom been analyzed and used for supporting LC map validation. This paper examines the potential of geo-tagged web texts as a new cost-free sample data source to assist LC map validation and proposes an active data collection approach. The proposed approach uses a customized deep web crawler to search for geo-tagged web texts based on land cover-related keywords and string-based rules matching. A data transformation based on buffer analysis is then performed to convert the collected web texts into LC sample data. Using three provinces and three municipalities directly under the Central Government in China as study areas, geo-tagged web texts were collected to validate artificial surface class of China’s 30-meter global land cover datasets (GlobeLand30-2010. A total of 6283 geo-tagged web texts were collected at a speed of 0.58 texts per second. The collected texts about built-up areas were transformed into sample data. User’s accuracy of 82.2% was achieved, which is close to that derived from formal expert validation. The preliminary results show that geo-tagged web texts are valuable ancillary data for LC map validation and the proposed approach can improve the efficiency of sample data collection.

Framework 'interstitial' oxygen in La10(GeO4)5-(GeO5)O2 apatite electrolyte

International Nuclear Information System (INIS)

Pramana, S.S.; White, T.J.

2007-01-01

Oxygen conduction at low temperatures in apatites make these materials potentially useful as electrolytes in solid-oxide fuel cells, but our understanding of the defect structures enabling ion migration is incomplete. While conduction along [001] channels is dominant, considerable inter-tunnel mobility has been recognized. Using neutron powder diffraction of stoichiometric 'La 10 (GeO 4 ) 6 O 3 ', it has been shown that this compound is more correctly described as an La 10 (GeO 4 ) 5- (GeO 5 )O 2 apatite, in which high concentrations of interstitial oxygen reside within the channel walls. It is suggested that these framework interstitial O atoms provide a reservoir of ions that can migrate into the conducting channels of apatite, via a mechanism of inter-tunnel oxygen diffusion that transiently converts GeO 4 tetrahedra to GeO 5 distorted trigonal bipyramids. This structural modification is consistent with known crystal chemistry and may occur generally in oxide apatites. (orig.)

Geo synthetics in hydraulic and coastal engineering: Filters, revetments and sand filled structures

International Nuclear Information System (INIS)

Bezuijen, A.; Pilarczyk, K. W.

2014-01-01

The paper deals with 2 applications of geo textiles in coastal and hydraulic engineering: Geo textiles in filters and revetments; and geo textiles in sand filled structure. Geo textiles are often replacing granular filters. However, they have different properties than a granular filter. For the application of geo textiles in revetments, the consequences of the different properties will be shown: how permeability is influenced by a geo textile and what can be the consequences of the weight differences between granular and geo textile filters. In the other application, the filter properties of geo textiles are only secondary. In geo textile tubes and containers the geo textile is used as wrapping material to create large unties that will not erode during wave attach. the structures with geo textile tubes and containers serve as an alternative for rock based structures. The first of these structures were more or less constructed by trial and error, but research on the shape of the structures, the stability under wave attach and the durability of the used of the used material has given the possibility to use design tools for these structures. Recently also the morphological aspects of these structures have been investigated. This is of importance because regularly structures with geo textile tubes fail due to insufficient toe protection against the scour hole that that develops in front of the structure, leading to undermining of the structure. Recent research in the Dealt Flume of Deltares and the Large Wave Flume in Hannover has led to better understanding what mechanisms determine the stability under wave attach. It is shown that also the degree of filling is of importance and the position of the water level with respect to the tube has a large influence. (Author)

Toward GEOS-6, A Global Cloud System Resolving Atmospheric Model

Science.gov (United States)

Putman, William M.

2010-01-01

NASA is committed to observing and understanding the weather and climate of our home planet through the use of multi-scale modeling systems and space-based observations. Global climate models have evolved to take advantage of the influx of multi- and many-core computing technologies and the availability of large clusters of multi-core microprocessors. GEOS-6 is a next-generation cloud system resolving atmospheric model that will place NASA at the forefront of scientific exploration of our atmosphere and climate. Model simulations with GEOS-6 will produce a realistic representation of our atmosphere on the scale of typical satellite observations, bringing a visual comprehension of model results to a new level among the climate enthusiasts. In preparation for GEOS-6, the agency's flagship Earth System Modeling Framework [JDl] has been enhanced to support cutting-edge high-resolution global climate and weather simulations. Improvements include a cubed-sphere grid that exposes parallelism; a non-hydrostatic finite volume dynamical core, and algorithm designed for co-processor technologies, among others. GEOS-6 represents a fundamental advancement in the capability of global Earth system models. The ability to directly compare global simulations at the resolution of spaceborne satellite images will lead to algorithm improvements and better utilization of space-based observations within the GOES data assimilation system

Assessment of state-of-the-art dust emission scheme in GEOS

Science.gov (United States)

Darmenov, A.; Liu, X.; Prigent, C.

2017-12-01

The GEOS modeling system has been extended with state-of-the-art parameterization of dust emissions based on the vertical flux formulation described in Kok et al., 2014. The new dust scheme was coupled with the GOCART and MAM aerosol models. In the present study we compared dust emissions, aerosol optical depth (AOD) and radiative fluxes from GEOS experiments with the standard and new dust emissions. AOD from the model experiments were also compared with AERONET and satellite based AOD product. Based on this comparative analysis we concluded that the new parameterization improved the GEOS capability to model dust aerosols originating from African sources, however it led to overestimation of dust emissions from Asian and Middle-Eastern sources. Further regional tuning of key parameters controlling the threshold friction velocity may be required in order to attain more definitive and uniform improvement in the dust modeling skill with the newly implemented dust emissions scheme.

Geo-neutrino review

International Nuclear Information System (INIS)

Tolich, N.

2012-01-01

The principal source of energy for dynamic processes of the earth, such as plate tectonics is thought to come from the radioactive decays of 238 U, 232 Th, and 40 K within the earth. These decays produce electron-antineutrinos, so-called geo-neutrinos, the measurement of which near the earth's surface allows for a direct measure of the total radiogenic heat production in the earth. The KamLAND and Borexino experiments have both measured a geo-neutrino flux significantly greater than zero. As shown in these proceedings, more precise future measurements will significantly constrain earth composition models.

Why Geo-Humanities

Science.gov (United States)

Graells, Robert Casals i.; Sibilla, Anna; Bohle, Martin

2016-04-01

Anthropogenic global change is a composite process. It consists of societal processes (in the 'noosphere') and natural processes (in the 'bio-geosphere'). The 'noosphere' is the ensemble of social, cultural or political insights ('shared subjective mental concepts') of people. Understanding the composite of societal and natural processes ('human geo-biosphere intersections'), which shapes the features of anthropogenic global change, would benefit from a description that draws equally on natural sciences, social sciences and humanities. To that end it is suggested to develop a concept of 'geo-humanities': This essay presents some aspects of its scope, discussing "knowledge that is to manage", "intentions that are to shape", "choices that are to justify" and "complexity that is to handle". Managing knowledge: That people understand anthropogenic global change requires their insights into how 'human geosphere intersections' function. Insights are formed ('processed') in the noosphere by means of interactions between people. Understanding how 'human geosphere intersections' functions combines scientific, engineering and economic studies with studies of the dynamics of the noosphere. Shaping intentions: During the last century anthropogenic global change developed as the collateral outcome of humankind's accumulated actions. It is caused by the number of people, the patterns of their consumption of resources, and the alterations of their environments. Nowadays, anthropogenic global chance is either an intentional negligence or a conscious act. Justifying choices: Humanity has alternatives how to alter Earth at planetary scale consciously. For example, there is a choice to alter the geo-biosphere or to adjust the noosphere. Whatever the choice, it will depend on people's world-views, cultures and preferences. Thus beyond issues whether science and technology are 'sound' overarching societal issues are to tackle, such as: (i) how to appropriate and distribute natural

Geographical aspects of geo-arbitrage: work in Canada and live in countries with low cost of living

Science.gov (United States)

Penney, J.; Dramowicz, K.

2016-04-01

The term geo-arbitrage means taking advantage of the difference in living costs between different geographic locations. This paper focuses on geographical aspects of international geo-arbitrage based on differences in the cost of living from one country to another. More precisely, the paper shows the perspective for a Canadian (student, volunteer, entrepreneur, IT person, or retiree) with some sort of mobile income or savings can take advantage of price differences by traveling to other countries. The paper is based on world development indicators, which cover a wide range of criteria when moving to another country. The data were collected for approximately 200 countries and represent the following categories of criteria: cost of living (economic factors), standard of living (such as safety, health care, environmental issues), and personal preferences (such as distance to home, Internet access or popularity of English language). The user input is required to rank or weight the importance of each of the criteria when moving to another country. One model was developed to emphasize the cost of living by controlling the weights ‘behind-the-scenes’. The results produce a list of the top suitable countries to practice geo-arbitrage. Another model allows the user to input weights for each criteria instead of ranks. The results from both models are mapped based on resulting suitability values. The top selected suitable countries are mapped, and the more specific information on each selected country is presented to the user, including the detailed cost of living, and current travel warning.

GEO Optical Data Association with Concurrent Metric and Photometric Information

Science.gov (United States)

Dao, P.; Monet, D.

Data association in a congested area of the GEO belt with occasional visits by non-resident objects can be treated as a Multi-Target-Tracking (MTT) problem. For a stationary sensor surveilling the GEO belt, geosynchronous and near GEO objects are not completely motionless in the earth-fixed frame and can be observed as moving targets. In some clusters, metric or positional information is insufficiently accurate or up-to-date to associate the measurements. In the presence of measurements with uncertain origin, star tracks (residuals) and other sensor artifacts, heuristic techniques based on hard decision assignment do not perform adequately. In the MMT community, Bar-Shalom [2009 Bar-Shalom] was first in introducing the use of measurements to update the state of the target of interest in the tracking filter, e.g. Kalman filter. Following Bar-Shalom’s idea, we use the Probabilistic Data Association Filter (PDAF) but to make use of all information obtainable in the measurement of three-axis-stabilized GEO satellites, we combine photometric with metric measurements to update the filter. Therefore, our technique Concurrent Spatio- Temporal and Brightness (COSTB) has the stand-alone ability of associating a track with its identity –for resident objects. That is possible because the light curve of a stabilized GEO satellite changes minimally from night to night. We exercised COSTB on camera cadence data to associate measurements, correct mistags and detect non-residents in a simulated near real time cadence. Data on GEO clusters were used.

The GEO-3 Scenarios 2002-2032. Quantification and Analysis of Environmental Impacts

International Nuclear Information System (INIS)

Bakkes, J.; Potting, J.; Kemp-Benedict, E.; Raskin, P.; Masui, T.; Rana, A.; Nellemann, C.; Rothman, D.

2004-01-01

The four contrasting visions of the world's next three decades as presented in the third Global Environment Outlook (GEO-3) have many implications for policy - from hunger to climate change and from freshwater issues to biodiversity. The four scenarios analysed are Markets First, Policy First, Security First, Sustainability First. Presenting a deeper analysis than the original GEO-3 report, this Technical Report quantifies the impacts of the scenarios for all 19 GEO 'sub-regions', such as Eastern Africa and Central Europe. Regional impacts are discussed in the context of sustainable development. The report summary compares the impacts of the four scenarios across regions - and for the world as a whole - in the light of internationally agreed targets including those in the Millennium Declaration where applicable. It provides an account of the analytical methods, key assumptions, models and other tools, along with the approaches used in the analyses. Based on the methods and results, the report looks back on the process of producing the forward-looking analysis for GEO-3. Were all analytical centres on the same track? Did the approach adopted for GEO-3 contribute to the overall GEO objective of strengthening global-regional involvement and linkages?

Visual-based simultaneous localization and mapping and global positioning system correction for geo-localization of a mobile robot

International Nuclear Information System (INIS)

Berrabah, Sid Ahmed; Baudoin, Yvan; Sahli, Hichem

2011-01-01

This paper introduces an approach combining visual-based simultaneous localization and mapping (V-SLAM) and global positioning system (GPS) correction for accurate multi-sensor localization of an outdoor mobile robot in geo-referenced maps. The proposed framework combines two extended Kalman filters (EKF); the first one, referred to as the integration filter, is dedicated to the improvement of the GPS localization based on data from an inertial navigation system and wheels' encoders. The second EKF implements the V-SLAM process. The linear and angular velocities in the dynamic model of the V-SLAM EKF filter are given by the GPS/INS/Encoders integration filter. On the other hand, the output of the V-SLAM EKF filter is used to update the dynamics estimation in the integration filter and therefore the geo-referenced localization. This solution increases the accuracy and the robustness of the positioning during GPS outage and allows SLAM in less featured environments

The proto-Earth geo-reactor: Reassessing the hypotheses

Directory of Open Access Journals (Sweden)

Claude Degueldre

2016-09-01

The present paper focuses on the geo-reactor hypothetical conditions including history, spatial extension and regimes. The discussion based on recent calculations involves investigations on the limits in term of fissile inventory, size and power, based on coupling of geochemical reactions and stratification through the gravitational field considering behavior through the inner mantle, the boundary with the core and the core. The reconstruction allows to formulating that from the history point of view it would have been possible that the geo-reactor reached criticality in a proto-Earth period as a reactor triggered by 235-uranium and that thorium may have worked as an absorber if the actinide concentration was locally large enough. Without actinide separation the initiation of the criticality is unlikely. However did the segregation of actinides occur in any Earth layer?

Location-based games

DEFF Research Database (Denmark)

Ejsing-Duun, Stine

In this dissertation, it is explored which prerequisites are necessary in location-based games (LBGs) to make meaningful the meeting between players and spatiality with an emphasis on physical locations. Throughout the dissertation, it has been shown that LBGs affect players’ perception of and be...... possible. The practical contribution is my creation of the LBG Visions of Sara. People continue to play this game in Odense more than two years after its launch, and DJEEO uses it as a showcase, enabling the company to sell similar LBGs....

The energy geo-policy

International Nuclear Information System (INIS)

Duval, M.

2005-01-01

This analysis updates and develops the analysis of the energy geo-policy proposed by the French Review of geo-policy. In this framework the today policies of the different sate and geographical actors, as suppliers and consumers of petroleum energy, are examined. Then the author analyzes the political problems resulting from, this petroleum energy transfers by earth and sea and the problems resulting specifically from the nuclear energy. The last part brings the author own opinions. (A.L.B.)

The European Location Framework - from National to European

Science.gov (United States)

Pauknerova, E.; Sidlichovsky, P.; Urbanas, S.; Med, M.

2016-06-01

The European Location Framework (ELF) means a technical infrastructure which will deliver authoritative, interoperable geospatial reference data from all over Europe for analysing and understanding information connected to places and features. The ELF has been developed and set up through the ELF Project, which has been realized by a consortium of partners (public, private and academic organisations) since March 2013. Their number increased from thirty to forty in the year 2016, together with a project extension from 36 to 44 months. The project is co-funded by the European Commission's Competitiveness and Innovation Framework Programme (CIP) and will end in October 2016. In broad terms, the ELF Project will deliver a unique gateway to the authoritative reference geospatial information for Europe (harmonised pan-European maps, geographic and land information) sourced from the National Mapping and Cadastral Authorities (NMCAs) around Europe and including transparent licensing. This will be provided as an online ELF web service that will deliver an up-to-date topographic base map and also as view & download services for access to the ELF datasets. To develop and build up the ELF, NMCAs are accompanied and collaborate with several research & academia institutes, a standardisation body, system integrators, software developers and application providers. The harmonisation is in progress developing and triggering a number of geo-tools like edge-matching, generalisation, transformation and others. ELF will provide also some centralised tools like Geo Locator for searching location based on geographical names, addresses and administrative units, and GeoProduct Finder for discovering the available web-services and licensing them. ELF combines national reference geo-information through the ELF platform. ELF web services will be offered to users and application developers through open source (OSKARI) and proprietary (ArcGIS Online) cloud platforms. Recently, 29 NMCAs plus the

A Novel Approach to Site Selection: Collaborative Multi-Criteria Decision Making through Geo-Social Network (Case Study: Public Parking

Directory of Open Access Journals (Sweden)

Zeinab Neisani Samani

2018-03-01

Full Text Available There are many potential factors that are involved in the decision making process of site selection, which makes it a challenging issue. This paper addresses the collaborative decision making concept through a geo-social network to predict site selection for public parking in Tehran, Iran. The presented approach utilized the analytic hierarchy process (AHP as a multi-criteria decision method (MCDM for weighting the criteria, which was completed in two stages; once by 50 experts, and then by three different levels of users, including 50 experts, 25 urban managers, and 150 pubic citizens, with respect to the case study area. The fuzzy majority method aggregates the archived results of AHP to determine the preferred locations that are suitable for public parking. The proposed method was implemented using a telegram bot platform. Two main advantages of the collaborative decision making scenario for public urban site selection are the fair distribution of the selected locations and the high satisfaction of users, which increased from 65% to 85%. This study presents an application for site selection based on multi-criteria decision making in a geo-social network context.

East–West GEO Satellite Station-Keeping with Degraded Thruster Response

Directory of Open Access Journals (Sweden)

Stoian Borissov

2015-09-01

Full Text Available The higher harmonic terms of Earth’s gravitational potential slowly modify the nominal longitude of geostationary Earth orbit (GEO satellites, while the third-body presence (Moon and Sun mainly affects their latitude. For this reason, GEO satellites periodically need to perform station-keeping maneuvers, namely, east–west and north–south maneuvers to compensate for longitudinal and latitudinal variations, respectively. During the operational lifetime of GEO satellites, the thrusters’ response when commanded to perform these maneuvers slowly departs from the original nominal impulsive behavior. This paper addresses the practical problem of how to perform reliable east–west station-keeping maneuvers when thruster response is degraded. The need for contingency intervention from ground-based satellite operators is reduced by breaking apart the scheduled automatic station-keeping maneuvers into smaller maneuvers. Orbital alignment and attitude are tracked on-board during and in between sub-maneuvers, and any off nominal variations are corrected for with subsequent maneuvers. These corrections are particularly important near the end of the lifetime of GEO satellites, where thruster response is farthest from nominal performance.

Enhanced STEM Learning with the GeoMapApp Data Exploration Tool

Science.gov (United States)

Goodwillie, A. M.

2014-12-01

GeoMapApp (http://www.geomapapp.org), is a free, map-based data discovery and visualisation tool developed with NSF funding at Lamont-Doherty Earth Observatory. GeoMapApp provides casual and specialist users alike with access to hundreds of built-in geoscience data sets covering geology, geophysics, geochemistry, oceanography, climatology, cryospherics, and the environment. Users can also import their own data tables, spreadsheets, shapefiles, grids and images. Simple manipulation and analysis tools combined with layering capabilities and engaging visualisations provide a powerful platform with which to explore and interrogate geoscience data in its proper geospatial context thus helping users to more easily gain insight into the meaning of the data. A global elevation base map covering the oceans as well as continents forms the backbone of GeoMapApp. The multi-resolution base map is updated regularly and includes data sources ranging from Space Shuttle elevation data for land areas to ultra-high-resolution surveys of coral reefs and seafloor hydrothermal vent fields. Examples of built-in data sets that can be layered over the elevation model include interactive earthquake and volcano data, plate tectonic velocities, hurricane tracks, land and ocean temperature, water column properties, age of the ocean floor, and deep submersible bottom photos. A versatile profiling tool provides instant access to data cross-sections. Contouring and 3-D views are also offered - the attached image shows a 3-D view of East Africa's Ngorongoro Crater as an example. Tabular data - both imported and built-in - can be displayed in a variety of ways and a lasso tool enables users to quickly select data points directly from the map. A range of STEM-based education material based upon GeoMapApp is already available, including a number of self-contained modules for school- and college-level students (http://www.geomapapp.org/education/contributed_material.html). More learning modules are

Onderzoek Location Based Marketing: Mobile = location = effect

NARCIS (Netherlands)

Gisbergen, M.S. van; Huhn, A.E.; Khan, V.J.; Ketelaar, P.E.

2011-01-01

Onderzoekers van de NHTV (Internationaa Hoger Onderwijs Breda, Radboud Universiteit, DVJ Insights en Popai Benelux lieten consumenten in een virtuele supermarkt advertenties via de smartphone ontvangen wanneer men langs het geadverteerde product liep. De uitkomsten laten zien dat 'location based

Implicit Three-Dimensional Geo-Modelling Based on HRBF Surface

Science.gov (United States)

Gou, J.; Zhou, W.; Wu, L.

2016-10-01

Three-dimensional (3D) geological models are important representations of the results of regional geological surveys. However, the process of constructing 3D geological models from two-dimensional (2D) geological elements remains difficult and time-consuming. This paper proposes a method of migrating from 2D elements to 3D models. First, the geological interfaces were constructed using the Hermite Radial Basis Function (HRBF) to interpolate the boundaries and attitude data. Then, the subsurface geological bodies were extracted from the spatial map area using the Boolean method between the HRBF surface and the fundamental body. Finally, the top surfaces of the geological bodies were constructed by coupling the geological boundaries to digital elevation models. Based on this workflow, a prototype system was developed, and typical geological structures (e.g., folds, faults, and strata) were simulated. Geological modes were constructed through this workflow based on realistic regional geological survey data. For extended applications in 3D modelling of other kinds of geo-objects, mining ore body models and urban geotechnical engineering stratum models were constructed by this method from drill-hole data. The model construction process was rapid, and the resulting models accorded with the constraints of the original data.

Real-Time Integration of Geo-data in ORM

NARCIS (Netherlands)

Balsters, Herman; Klaver, Chris; Huitema, George B.; Meersman, R; Dillon, T; Herrero, P

2010-01-01

Geographic information (geo-data; i.e., data with a spatial component.) is being used for civil, political, and commercial applications. Modeling geo-data can be involved due to its often very complex structure, hence placing high demands on the modeling language employed. Many geo-applications

GeoNetwork powered GI-cat: a geoportal hybrid solution

Science.gov (United States)

Baldini, Alessio; Boldrini, Enrico; Santoro, Mattia; Mazzetti, Paolo

2010-05-01

To the aim of setting up a Spatial Data Infrastructures (SDI) the creation of a system for the metadata management and discovery plays a fundamental role. An effective solution is the use of a geoportal (e.g. FAO/ESA geoportal), that has the important benefit of being accessible from a web browser. With this work we present a solution based integrating two of the available frameworks: GeoNetwork and GI-cat. GeoNetwork is an opensource software designed to improve accessibility of a wide variety of data together with the associated ancillary information (metadata), at different scale and from multidisciplinary sources; data are organized and documented in a standard and consistent way. GeoNetwork implements both the Portal and Catalog components of a Spatial Data Infrastructure (SDI) defined in the OGC Reference Architecture. It provides tools for managing and publishing metadata on spatial data and related services. GeoNetwork allows harvesting of various types of web data sources e.g. OGC Web Services (e.g. CSW, WCS, WMS). GI-cat is a distributed catalog based on a service-oriented framework of modular components and can be customized and tailored to support different deployment scenarios. It can federate a multiplicity of catalogs services, as well as inventory and access services in order to discover and access heterogeneous ESS resources. The federated resources are exposed by GI-cat through several standard catalog interfaces (e.g. OGC CSW AP ISO, OpenSearch, etc.) and by the GI-cat extended interface. Specific components implement mediation services for interfacing heterogeneous service providers, each of which exposes a specific standard specification; such components are called Accessors. These mediating components solve providers data modelmultiplicity by mapping them onto the GI-cat internal data model which implements the ISO 19115 Core profile. Accessors also implement the query protocol mapping; first they translate the query requests expressed

The GEO-3 Scenarios 2002-2032. Quantification and Analysis of Environmental Impacts

Energy Technology Data Exchange (ETDEWEB)

Bakkes, J.; Potting, J. (eds.) [National Institute for Public Health and the Environment RIVM, Bilthoven (Netherlands); Henrichs, T. [Center for Environmental Systems Research CESR, University of Kassel, Kassel (Germany); Kemp-Benedict, E.; Raskin, P. [Stockholm Environment Institute SEI, Boston, MA (United States); Masui, T.; Rana, A. [National Institute for Environmental Studies NIES, Ibaraki (Japan); Nellemann, C. [United Nations Environment Programme UNEP, GRID Global and Regional Integrated Data centres Arendal, Lillehammer (Norway); Rothman, D. [International Centre for Integrative Studies ICIS, Maastricht University, Maastricht (Netherlands)

2004-07-01

The four contrasting visions of the world's next three decades as presented in the third Global Environment Outlook (GEO-3) have many implications for policy - from hunger to climate change and from freshwater issues to biodiversity. The four scenarios analysed are Markets First, Policy First, Security First, Sustainability First. Presenting a deeper analysis than the original GEO-3 report, this Technical Report quantifies the impacts of the scenarios for all 19 GEO 'sub-regions', such as Eastern Africa and Central Europe. Regional impacts are discussed in the context of sustainable development. The report summary compares the impacts of the four scenarios across regions - and for the world as a whole - in the light of internationally agreed targets including those in the Millennium Declaration where applicable. It provides an account of the analytical methods, key assumptions, models and other tools, along with the approaches used in the analyses. Based on the methods and results, the report looks back on the process of producing the forward-looking analysis for GEO-3. Were all analytical centres on the same track? Did the approach adopted for GEO-3 contribute to the overall GEO objective of strengthening global-regional involvement and linkages?.

XAFS study of GeO sub 2 glass under pressure

CERN Document Server

Ohtaka, O; Fukui, H; Murai, K; Okube, M; Takebe, H; Katayama, Y; Utsumi, W

2002-01-01

Using a large-volume high-pressure apparatus, Li sub 2 O-4GeO sub 2 glass and pure GeO sub 2 gel have been compressed to 14 GPa at room temperature and their local structural changes have been investigated by an in situ XAFS (x-ray absorption fine-structure) method. On compression of Li sub 2 O-4GeO sub 2 glass, the Ge-O distance gradually becomes short below 7 GPa, showing the conventional compression of the GeO sub 4 tetrahedron. Abrupt increase in the Ge-O distance occurs between 8 and 10 GPa, which corresponds to the coordination number (CN) changing from 4 to 6. The CN change is completed at 10 GPa. On decompression, the reverse transition occurs gradually below 10 GPa. In contrast to the case for Li sub 2 O-4GeO sub 2 glass, the Ge-O distance in GeO sub 2 gel gradually increases over a pressure range from 2 to 12 GPa, indicating that continuous change in CN occurs. The Ge-O distance at 12 GPa is shorter than that of Li-4GeO sub 2 indicating that the change in CN is not completed even at this pressure. O...

The Geo-strategies and Global Peace of Technology on Customer Relationship Management Performance: A Pilot Study among SME’s Logistic Operators

Directory of Open Access Journals (Sweden)

Muhamad Fairos Mohamad Shah

2017-12-01

Full Text Available Small and medium enterprises (SMEs are playing an increasingly important role in sustaining geo strategies and global peace economic growth and logistic system in Malaysia. SMEs also play a very crucial role in customer relationship as they may serve the roles of customer, distributor producer and supplier. However, adaption of customer relationship in Malaysian SMEs has not been fully explored. CRMP model for logistic service presents the combination of technology strategy in term of geo strategies and global peace. The goal of this study is to investigate customer relationship management performance and technology strategy. The dimensions for technology factors are Support information system, information sharing, Usefulness, care/help, ease of use, service portfolio, security and Update System. The populations of study were customers from a logistic company located in Pulau Pinang. Simple random sampling was selected from the target populations. Data collection resulted in 100 respondents to answers questionnaire from the customers of logistic company. Based on the finding, the result showed that, technology strategies are anchor factors in determining geo strategies and global peace on customer relationship management performance. Further study has important managerial implications as the findings will enable management of SMEs to understand progressive and highly varied CRMP practices and contextual factors that contribute to the CRMP as well as geo strategies and global peace and innovative implementation.

GeoSpark SQL: An Effective Framework Enabling Spatial Queries on Spark

Directory of Open Access Journals (Sweden)

Zhou Huang

2017-09-01

Full Text Available In the era of big data, Internet-based geospatial information services such as various LBS apps are deployed everywhere, followed by an increasing number of queries against the massive spatial data. As a result, the traditional relational spatial database (e.g., PostgreSQL with PostGIS and Oracle Spatial cannot adapt well to the needs of large-scale spatial query processing. Spark is an emerging outstanding distributed computing framework in the Hadoop ecosystem. This paper aims to address the increasingly large-scale spatial query-processing requirement in the era of big data, and proposes an effective framework GeoSpark SQL, which enables spatial queries on Spark. On the one hand, GeoSpark SQL provides a convenient SQL interface; on the other hand, GeoSpark SQL achieves both efficient storage management and high-performance parallel computing through integrating Hive and Spark. In this study, the following key issues are discussed and addressed: (1 storage management methods under the GeoSpark SQL framework, (2 the spatial operator implementation approach in the Spark environment, and (3 spatial query optimization methods under Spark. Experimental evaluation is also performed and the results show that GeoSpark SQL is able to achieve real-time query processing. It should be noted that Spark is not a panacea. It is observed that the traditional spatial database PostGIS/PostgreSQL performs better than GeoSpark SQL in some query scenarios, especially for the spatial queries with high selectivity, such as the point query and the window query. In general, GeoSpark SQL performs better when dealing with compute-intensive spatial queries such as the kNN query and the spatial join query.

Unraveling Metabolic Variation for Blueberry and Chokeberry Cultivars Harvested from Different Geo-Climatic Regions in Korea.

Science.gov (United States)

Sim, Inseon; Suh, Dong Ho; Singh, Digar; Do, Seon-Gil; Moon, Kwang Hyun; Lee, Jeong Ho; Ku, Kang-Mo; Lee, Choong Hwan

2017-10-18

Temporal geo-climatic variations are presumably vital determinants of phenotypic traits and quality characteristics of berries manifested through reconfigured metabolomes. We performed an untargeted mass spectrometry (MS)-based metabolomic analysis of blueberry (Vaccinium spp.) and chokeberry (Aronia melanocarpa) sample extracts harvested from different geo-climatic regions in Korea. The multivariate statistical analysis indicated distinct metabolite compositions of berry groups based on different species and regions. The amino acids levels were relatively more abundant in chokeberry than in blueberry, while the sugar contents were comparatively higher in blueberry. However, the metabolite compositions were also dependent on geo-climatic conditions, especially latitude. Notwithstanding the cultivar types, amino acids, and sucrose were relatively more abundant in berries harvested from 35°N and 36°N geo-climatic regions, respectively, characterized by distinct duration of sunshine and rainfall patterns. The present study showed the ability of a metabolomics approach for recapitulating the significance of geo-climatic parameters for quality characterization of commercial berry types.

Zone-based RSS Reporting for Location Fingerprinting

DEFF Research Database (Denmark)

Kjærgaard, Mikkel Baun; Treu, Georg; Linnhoff–Popien, Claudia

2007-01-01

In typical location fingerprinting systems a tracked terminal reports sampled Received Signal Strength (RSS) values to a location server, which estimates its position based on a database of pre-recorded RSS fingerprints. So far, poll-based and periodic RSS reporting has been proposed. However......, for supporting proactive Location-based Services (LBSs), triggered by pre-defined spatial events, the periodic protocol is inefficient. Hence, this paper introduces zone-based RSS reporting: the location server translates geographical zones defined by the LBS into RSS-based representations, which are dynamically...

Dynamic taxonomies applied to a web-based relational database for geo-hydrological risk mitigation

Science.gov (United States)

Sacco, G. M.; Nigrelli, G.; Bosio, A.; Chiarle, M.; Luino, F.

2012-02-01

In its 40 years of activity, the Research Institute for Geo-hydrological Protection of the Italian National Research Council has amassed a vast and varied collection of historical documentation on landslides, muddy-debris flows, and floods in northern Italy from 1600 to the present. Since 2008, the archive resources have been maintained through a relational database management system. The database is used for routine study and research purposes as well as for providing support during geo-hydrological emergencies, when data need to be quickly and accurately retrieved. Retrieval speed and accuracy are the main objectives of an implementation based on a dynamic taxonomies model. Dynamic taxonomies are a general knowledge management model for configuring complex, heterogeneous information bases that support exploratory searching. At each stage of the process, the user can explore or browse the database in a guided yet unconstrained way by selecting the alternatives suggested for further refining the search. Dynamic taxonomies have been successfully applied to such diverse and apparently unrelated domains as e-commerce and medical diagnosis. Here, we describe the application of dynamic taxonomies to our database and compare it to traditional relational database query methods. The dynamic taxonomy interface, essentially a point-and-click interface, is considerably faster and less error-prone than traditional form-based query interfaces that require the user to remember and type in the "right" search keywords. Finally, dynamic taxonomy users have confirmed that one of the principal benefits of this approach is the confidence of having considered all the relevant information. Dynamic taxonomies and relational databases work in synergy to provide fast and precise searching: one of the most important factors in timely response to emergencies.

Designing Android Based Augmented Reality Location-Based Service Application

Directory of Open Access Journals (Sweden)

Alim Hardiansyah

2018-01-01

Full Text Available Android is an operating system for Linux based smartphone. Android provides an open platform for the developers to create their own application. The most developed and used application now is location based application. This application gives personalization service for mobile device user and is customized to their location. Location based service also gives an opportunity for the developers to develop and increase the value of service. One of the technologies that could be combined with location based application is augmented reality. Augmented reality combines the virtual world with the real one. By the assistance of augmented reality, our surrounding environment could interact in digital form. Information of objects and environment surround us could be added to the augmented reality system and presented. Based on the background, the writers tried to implement those technologies on now rapidly developing android application as a final project to achieve bachelor degree in Department of Informatics Engineering, Faculty of Information Technology and Visual Communication, Al Kamal Science and Technology Institute. This application could be functioned to locate school by using location based service technology with the assistance of navigational applications such as waze and google maps, in form of live direction process through the smartphone

GeoViQua: quality-aware geospatial data discovery and evaluation

Science.gov (United States)

Bigagli, L.; Papeschi, F.; Mazzetti, P.; Nativi, S.

2012-04-01

/tracking information such as provenance of data and metadata), and user-generated metadata (informal user comments, usage information, rating, etc.). Moreover, metadata should include sufficiently complete access information, to allow rich data visualization and propagation. The following main enabling components are currently identified within WP4: - Quality-aware access services, e.g. a quality-aware extension of the OGC Sensor Observation Service (SOS-Q) specification, to support quality constraints for sensor data publishing and access; - Quality-aware discovery services, namely a quality-aware extension of the OGC Catalog Service for the Web (CSW-Q), to cope with quality constrained search; - Quality-augmentation broker (GeoViQua Broker), to support the linking and combination of the existing GCI metadata with GeoViQua- and user-generated metadata required to support the users in selecting the "best" data for their intended use. We are currently developing prototypes of the above quality-enabled geo-search components, that will be assessed in a sensor-based pilot case study in the next months. In particular, the GeoViQua Broker will be integrated with the EuroGEOSS Broker, to implement CSW-Q and federate (either via distribution or harvesting schemes) quality-aware data sources, GeoViQua will constitute a valuable test-bed for advancing the current best practices and standards in geospatial quality representation and exploitation. The research leading to these results has received funding from the European Community's Seventh Framework Programme (FP7/2007-2013) under Grant Agreement n° 265178.

Long-Term Performance of the Laguna de Barlovento Reservoir Water-Proofing using a PVC-P Geo membrane

International Nuclear Information System (INIS)

Blanco Fernandez, M.; Leiro Lopez, A.; Soriano Carrillo, J.; Crespo Mucientes, M.; Zornberg, J.; Aguilar Gonzalez, E.; Rico Arnaiz, G.; Pargada Iglesias, L.

2014-01-01

The Laguna de Barlovento reservoir was one of the most important European hydraulic projects at the time of its construction because of its high capacity and challenging location. At the time, the designers decided to waterproof this reservoirs with a geo membrane of plasticized polyvinyl chloride (PVC-P). This paper documents the initial characteristics of the geo membrane and its performance since its installation until 2010. The material characterization includes a comprehensive testing program, the results of which are presented. They include quantification of the geo membrane thickness, amount and nature of plasticizers, tensile properties, fold ability under low temperatures, dynamic impact resistance, puncture resistance, welding strength (both in the manufacturing facility and in the field), as well as the use of techniques involving optical and scanning electron microscopy. In addition, advanced analytical techniques, such as Fourier Transform Infrared Spectroscopy (FTIR), Gas Chromatography (GC) and Mass spectrometry (MS), were used in order to identify the plasticizers used in the geo membrane formulation. Fold ability tests were found to provide early indication of degradation. Results from reflection optical and electron scanning microscopy showed that, after 19 nineteen years of installation, the geo membrane remains in good conditions, particularly on the non-exposed side. (Author)

The Protection of Cultural Heritage Sites from Geo-Hazards

Science.gov (United States)

Themistocleous, Kyriacos; Agapiou, Athos; Cuca, Branka; Lysandrou, Vasiliki; Tzouvaras, Marios; Michaelides, Silas; Hadjimitsis, Diofantos; Margottini, Claudio; Cigna, Francesca; Crosta, Giovanni; Fernandez, Jose

2016-04-01

Cultural heritage sites are continuously impacted by several environmental and anthropogenic factors, including climate change, precipitation, natural hazards, wars, etc. However, there is limited data available regarding the effects of geo-hazards on cultural heritage sites. This paper presents the methodology of the PROTHEGO project, which uses radar interferometry to monitor surface deformation with mm precision to analyze the impact of geo-hazards in cultural heritage sites in Europe. PROTHEGO will provide a new, low-cost methodological approach for the safe management of cultural heritage monuments and sites located in Europe. The project will apply InSAR techniques to monitor monuments and sites that are potentially unstable due to landslides, sinkholes, settlement, subsidence, active tectonics as well as structural deformation, all of which can be effected of climate change and human interaction. The research methodology will be focused on long-term low-impact monitoring systems as well as indirect analysis of environmental contexts to investigate changes and decay of structure, material and landscape. The methodology will be applied to more than 450 sites on the UNESCO World Heritage List in geographical Europe. One of the case study selected is located in Cyprus at Choirokoitia, which is a UNESCO World Heritage site. The outcomes of PROTHEGO will support correct planning and rebalancing the contrast between endogenous (structural and materials decay, the societal development, the anthropogenic pressure) and surrounding exogenous forces (natural hazards acting on the heritage) which affecting the European cultural heritage.

GeoMel Technologies. Providing technology solutions to environmental hazardous waste problems

International Nuclear Information System (INIS)

2003-01-01

,000 metric tons of contaminated materials on three continents. AMEC, under an exclusive agreement, is further developing the technologies and marketing and implementing them globally. GeoMelt offers significant advantages for site remediation and waste treatment: - Commercially proven at large scale; - Can treat mixed organic, inorganic and radioactive contaminants simultaneously; - Extremely high waste loadings; - Mobile for on-site or off-site use and can be performed in-situ or in a batch plant; - High tolerance for debris such as concrete, scrap metal, wood and plastic; - Treated mass is highly resistant to leaching and weathering; - Permitted by the U.S. EPA for the treatment of PCBs nation wide; - Selected in Australia as an alternative to incineration; - High degree of public and regulatory acceptance; - Treatment rates of up to 100 tons per day. In addition to GeoMelt, AMEC offers a complete range of other environmental and geotechnical services in North America and abroad from 90 Earth and Environmental offices. Globally, AMEC operates in 40 countries and is a leading provider of services and engineering solutions to the world's infrastructure, manufacturing and process industries. AMEC has been ranked as the leading international design firm by Engineering News- Record magazine. Learn more about GeoMelt at www.geomelt.com. For a list of office locations, company contacts and other services refer to: www.amec.com

Effect of risk-based payment model on caries inequalities in preschool children assessed by geo-mapping.

Science.gov (United States)

Holmén, Anders; Strömberg, Ulf; Håkansson, Gunnel; Twetman, Svante

2018-01-05

To describe, with aid of geo-mapping, the effects of a risk-based capitation model linked to caries-preventive guidelines on the polarization of caries in preschool children living in the Halland region of Sweden. The new capitation model was implemented in 2013 in which more money was allocated to Public Dental Clinics surrounded by administrative parishes inhabited by children with increased caries risk, while a reduced capitation was allocated to those clinics with a low burden of high risk children. Regional geo-maps of caries risk based on caries prevalence, level of education and the families purchasing power were produced for 3-6-year-old children in 2010 (n = 10,583) and 2016 (n = 7574). Newly migrated children to the region (n = 344 in 2010 and n = 522 in 2016) were analyzed separately. A regional caries polarization index was calculated as the ratio between the maximum and minimum estimates of caries frequency on parish-level, based on a Bayesian hierarchical mapping model. Overall, the total caries prevalence (dmfs > 0) remained unchanged from 2010 (10.6%) to 2016 (10.5%). However, the polarization index decreased from 7.0 in 2010 to 5.6 in 2016. Newly arrived children born outside Sweden had around four times higher caries prevalence than their Swedish-born peers. A risk-based capitation model could reduce the socio-economic inequalities in dental caries among preschool children living in Sweden. Although updated evidence-based caries-preventive guidelines were released, the total prevalence of caries on dentin surface level was unaffected 4 years after the implementation.

Kennisagenda Geo-informatie: GISsen met beleid

NARCIS (Netherlands)

Dessing, N.; Lips, F.; Hoogenboom, J.; Vullings, L.A.E.

2009-01-01

LNV wil méér geo-informatie inzetten bij de ontwikkeling en uitvoering van beleid en beleidsnota’s ruimer voorzien van kaartmateriaal. Dit betekent dat geo-informatie vaker moet worden benut om lokale knelpunten, mogelijkheden en de gevolgen van alternatieve oplossingen inzichtelijk te maken. Om dit

Database Aspects of Location-Based Services

DEFF Research Database (Denmark)

Jensen, Christian Søndergaard

2004-01-01

in the databases underlying high-quality services. Several integrated representations - which capture different aspects of the same infrastructure - are needed. Further, all other content that can be related to geographical space must be integrated with the infrastructure representations. The chapter describes...... the general concepts underlying one approach to data modeling for location-based services. The chapter also covers techniques that are needed to keep a database for location-based services up to date with the reality it models. As part of this, caching is touched upon briefly. The notion of linear referencing......Adopting a data management perspective on location-based services, this chapter explores central challenges to data management posed by location-based services. Because service users typically travel in, and are constrained to, transportation infrastructures, such structures must be represented...

Sites for locations of nuclear reactors; Sitios para emplazamientos de reactores nucleares

Energy Technology Data Exchange (ETDEWEB)

Balcazar, M.; Huerta, M.; Lopez, A., E-mail: miguel.balcazar@inin.gob.mx [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

2014-10-15

A restriction on sites of nuclear energy is the history of seismic activity, in its magnitude (Richter) and intensity (Mercalli). This article delimits the areas of greatest magnitude and national seismic intensity, with restrictions of ground acceleration; the supplement areas with a low magnitude of seismic activity are shown. Potential sites for the location of these sites are introduced into a geographic information system. The set of geo-referenced data contains the location of the active volcanic manifestations; the historical record of earthquake epicenters, magnitudes and intensities; major geological faults; surface hydrology and water bodies; location of population density; protected areas; contour lines; the rock type or geology. The geographic information system allows entering normative criteria and environmental restrictions that correlate with geo-referenced data described above, forms both probable and exclusion areas for the installation of nuclear sites. (Author)

User requirements for geo-collaborative work with spatio-temporal data in a web-based virtual globe environment.

Science.gov (United States)

Yovcheva, Zornitza; van Elzakker, Corné P J M; Köbben, Barend

2013-11-01

Web-based tools developed in the last couple of years offer unique opportunities to effectively support scientists in their effort to collaborate. Communication among environmental researchers often involves not only work with geographical (spatial), but also with temporal data and information. Literature still provides limited documentation when it comes to user requirements for effective geo-collaborative work with spatio-temporal data. To start filling this gap, our study adopted a User-Centered Design approach and first explored the user requirements of environmental researchers working on distributed research projects for collaborative dissemination, exchange and work with spatio-temporal data. Our results show that system design will be mainly influenced by the nature and type of data users work with. From the end-users' perspective, optimal conversion of huge files of spatio-temporal data for further dissemination, accuracy of conversion, organization of content and security have a key role for effective geo-collaboration. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Geo-Seas - a pan-European infrastructure for the management of marine geological and geophysical data.

Science.gov (United States)

Glaves, Helen; Graham, Colin

2010-05-01

countries. This makes the direct use of primary data in an integrated way very difficult and also hampers use of the data sets in a harmonised way to produce multidisciplinary data products and services. To ensure interoperability with other marine environmental data types Geo-Seas ISO19115 metadata, OGC and GeoSciML standards will be used as the basis for the metadata profiles for the geological and geophysical data. This will be largely achieved by modifying the SeaDataNet metadata standard profile (Common Data Index or CDI), which is itself based upon the ISO19115 standard, to accommodate the requirements of the Geo-Seas project. The overall objective of Geo-Seas project is to build and deploy a unified marine geoscientific data infrastructure within Europe which will in effect provide a data grid for the sharing of marine geological and geophysical data. This will result in a major improvement in the locating, accessing and delivery of federated marine geological and geophysical data and data products from national geological surveys and research institutes across Europe. There is an emphasis on interoperability both with other disciplines as well as with other key framework projects including the European Marine Observation and Data Network (EMODNet) and One Geology - Europe. In addition, a key objective of the Geo-Seas project is to underpin European directives such as INSPIRE as well as recent framework programmes on both the global and European scale, for example Global Earth Observation System of Systems (GEOSS) and Global Monitoring for Environment and Security (GMES), all of which are intended to encourage the exchange of data and information. Geo-Seas consortium partners: NERC-BGS (United Kingdom), NERC-BODC (United Kingdom), NERC-NOCS (United Kingdom), MARIS (Netherlands), IFREMER (France), BRGM (France), TNO (Netherlands), BSH (Germany), IGME (Spain), INETI (Portugal), IGME (Greece), GSI (Ireland), BGR (Germany), OGS (Italy), GEUS (Denmark), NGU (Norway), PGI

Integrated Geo Hazard Management System in Cloud Computing Technology

Science.gov (United States)

Hanifah, M. I. M.; Omar, R. C.; Khalid, N. H. N.; Ismail, A.; Mustapha, I. S.; Baharuddin, I. N. Z.; Roslan, R.; Zalam, W. M. Z.

2016-11-01

Geo hazard can result in reducing of environmental health and huge economic losses especially in mountainous area. In order to mitigate geo-hazard effectively, cloud computer technology are introduce for managing geo hazard database. Cloud computing technology and it services capable to provide stakeholder's with geo hazards information in near to real time for an effective environmental management and decision-making. UNITEN Integrated Geo Hazard Management System consist of the network management and operation to monitor geo-hazard disaster especially landslide in our study area at Kelantan River Basin and boundary between Hulu Kelantan and Hulu Terengganu. The system will provide easily manage flexible measuring system with data management operates autonomously and can be controlled by commands to collects and controls remotely by using “cloud” system computing. This paper aims to document the above relationship by identifying the special features and needs associated with effective geohazard database management using “cloud system”. This system later will use as part of the development activities and result in minimizing the frequency of the geo-hazard and risk at that research area.

Study on Zero-Doppler Centroid Control for GEO SAR Ground Observation

Directory of Open Access Journals (Sweden)

Yicheng Jiang

2014-01-01

Full Text Available In geosynchronous Earth orbit SAR (GEO SAR, Doppler centroid compensation is a key step for imaging process, which could be performed by the attitude steering of a satellite platform. However, this zero-Doppler centroid control method does not work well when the look angle of radar is out of an expected range. This paper primarily analyzes the Doppler properties of GEO SAR in the Earth rectangular coordinate. Then, according to the actual conditions of the GEO SAR ground observation, the effective range is presented by the minimum and maximum possible look angles which are directly related to the orbital parameters. Based on the vector analysis, a new approach for zero-Doppler centroid control in GEO SAR, performing the attitude steering by a combination of pitch and roll rotation, is put forward. This approach, considering the Earth’s rotation and elliptical orbit effects, can accurately reduce the residual Doppler centroid. All the simulation results verify the correctness of the range of look angle and the proposed steering method.

A GeoWall with Physics and Astronomy Applications

Science.gov (United States)

Dukes, Phillip; Bruton, Dan

2008-03-01

A GeoWall is a passive stereoscopic projection system that can be used by students, teachers, and researchers for visualization of the structure and dynamics of three-dimensional systems and data. The type of system described here adequately provides 3-D visualization in natural color for large or small groups of viewers. The name ``GeoWall'' derives from its initial development to visualize data in the geosciences.1 An early GeoWall system was developed by Paul Morin at the electronic visualization laboratory at the University of Minnesota and was applied in an introductory geology course in spring of 2001. Since that time, several stereoscopic media, which are applicable to introductory-level physics and astronomy classes, have been developed and released into the public domain. In addition to the GeoWall's application in the classroom, there is considerable value in its use as part of a general science outreach program. In this paper we briefly describe the theory of operation of stereoscopic projection and the basic necessary components of a GeoWall system. Then we briefly describe how we are using a GeoWall as an instructional tool for the classroom and informal astronomy education and in research. Finally, we list sources for several of the free software media in physics and astronomy available for use with a GeoWall system.

High-pressure EXAFS study of vitreous GeO2 up to 44 GPa

International Nuclear Information System (INIS)

Baldini, M.; Aquilanti, G.; Mao, H-k.; Yang, W.; Shen, G.; Pascarelli, S.; Mao, W. L.

2010-01-01

High-pressure extended x-ray absorption fine-structure measurements were performed on amorphous GeO 2 over increasing and decreasing pressure cycles at pressures up to 44 GPa. Several structural models based on crystalline phases with fourfold, fivefold, and sixfold coordination were used to fit the Ge-O first shell. The Ge-O bond lengths gradually increased up to 30 GPa. Three different pressure regimes were identified in the pressure evolution of the Ge-O bond distances. Below 13 GPa, the local structure was well described by a fourfold 'quartzlike' model whereas a disordered region formed by a mixture of four- and five-coordinated germanium-centered polyhedra was observed in the intermediate pressure range between 13 and 30 GPa. Above 30 GPa the structural transition to the maximum coordination could be considered complete. The present results shed light on the GeO 2 densification process and on the nature of the amorphous-amorphous transition, suggesting that the transition is more gradual and continuous than what has been previously reported.

A Geo-referenced 3D model of the Juan de Fuca Slab and associated seismicity

Science.gov (United States)

Blair, J.L.; McCrory, P.A.; Oppenheimer, D.H.; Waldhauser, F.

2011-01-01

We present a Geographic Information System (GIS) of a new 3-dimensional (3D) model of the subducted Juan de Fuca Plate beneath western North America and associated seismicity of the Cascadia subduction system. The geo-referenced 3D model was constructed from weighted control points that integrate depth information from hypocenter locations and regional seismic velocity studies. We used the 3D model to differentiate earthquakes that occur above the Juan de Fuca Plate surface from earthquakes that occur below the plate surface. This GIS project of the Cascadia subduction system supersedes the one previously published by McCrory and others (2006). Our new slab model updates the model with new constraints. The most significant updates to the model include: (1) weighted control points to incorporate spatial uncertainty, (2) an additional gridded slab surface based on the Generic Mapping Tools (GMT) Surface program which constructs surfaces based on splines in tension (see expanded description below), (3) double-differenced hypocenter locations in northern California to better constrain slab location there, and (4) revised slab shape based on new hypocenter profiles that incorporate routine depth uncertainties as well as data from new seismic-reflection and seismic-refraction studies. We also provide a 3D fly-through animation of the model for use as a visualization tool.

Error Analysis of Fast Moving Target Geo-location in Wide Area Surveillance Ground Moving Target Indication Mode

Directory of Open Access Journals (Sweden)

Zheng Shi-chao

2013-12-01

Full Text Available As an important mode in airborne radar systems, Wide Area Surveillance Ground Moving Target Indication (WAS-GMTI mode has the ability of monitoring a large area in a short time, and then the detected moving targets can be located quickly. However, in real environment, many factors introduce considerable errors into the location of moving targets. In this paper, a fast location method based on the characteristics of the moving targets in WAS-GMTI mode is utilized. And in order to improve the location performance, those factors that introduce location errors are analyzed and moving targets are relocated. Finally, the analysis of those factors is proved to be reasonable by simulation and real data experiments.

GEO activities towards improved Geophysical monitoring. A key input to Disaster Risk Reduction.

Science.gov (United States)

Achache, J.; Rum, G.

2007-05-01

GEO has been established in 2005 with the main objective to put in place a Global, Coordinated, Comprehensive and Sustained System of Observing Systems (GEOSS) to serve 9 Social Benefit Areas, among which Disaster Risk Reduction. The paper will first set up the reference GEO framework, through a brief description of GEOSS key features, architectural functions and capacity building, and then will recall the value of the Geophysical observations, coming both from in situ and remote (satellite) systems, and, even more important, of their integration. GEO activities related to Geophysical monitoring and the use of related observation to foster social benefits in the Disaster Risk Reduction area will then be shortly described, together with the on-going key actions, including specific examples on key scientific/technical and data sharing aspects associated to GEOSS implementation. Special attention will be devoted on how Capacity Building strategy and activities are addressed through GEOSS development, building on infrastructure and programs under consolidation within GEO framework, such as the GEOSS Information collection and dissemination systems under development (GEONETCast, GEO Web Portal, GEO Clearinghouse) and the UN programs such as SPIDER (SPace based Information for Disaster management and Emergency Response) and UNOSAT. The paper will provide recommendations on the way forward for the implementation of Disaster Risk Management provisions as an integral part of sustainable development, also with the objective of creating within GEO a supporting framework to UNDP and World Bank activities on Risk Identification and Assessment.

Vision-Based Geo-Monitoring - A New Approach for an Automated System

Science.gov (United States)

Wagner, A.; Reiterer, A.; Wasmeier, P.; Rieke-Zapp, D.; Wunderlich, T.

2012-04-01

The necessity for monitoring geo-risk areas such as rock slides is growing due to the increasing probability of such events caused by environmental change. Life with threat becomes to a calculable risk by geodetic deformation monitoring. An in-depth monitoring concept with modern measurement technologies allows the estimation of the hazard potential and the prediction of life-threatening situations. The movements can be monitored by sensors, placed in the unstable slope area. In most cases, it is necessary to enter the regions at risk in order to place the sensors and maintain them. Using long-range monitoring systems (e.g. terrestrial laser scanners, total stations, ground based synthetic aperture radar) allows avoiding this risk. To close the gap between the existing low-resolution, medium-accuracy sensors and conventional (co-operative target-based) surveying methods, image-assisted total stations (IATS) are a suggestive solution. IATS offer the user (e.g. metrology expert) an image capturing system (CCD/CMOS camera) in addition to 3D point measurements. The images of the telescope's visual field are projected onto the camera's chip. With appropriate calibration, these images are accurately geo-referenced and oriented since the horizontal and vertical angles of rotation are continuously recorded. The oriented images can directly be used for direction measurements with no need for object control points or further photogrammetric orientation processes. IATS are able to provide high density deformation fields with high accuracy (down to mm range), in all three coordinate directions. Tests have shown that with suitable image processing measurements a precision of 0.05 pixel ± 0.04·σ is possible (which corresponds to 0.03 mgon ± 0.04·σ). These results have to be seen under the consideration that such measurements are image-based only. For measuring in 3D object space the precision of pointing has to be taken into account. IATS can be used in two different ways

The Population of Optically Faint GEO Debris

Science.gov (United States)

Seitzer, Patrick; Barker, Ed; Buckalew, Brent; Burkhardt, Andrew; Cowardin, Heather; Frith, James; Gomez, Juan; Kaleida, Catherine; Lederer, Susan M.; Lee, Chris H.

2016-01-01

The 6.5-m Magellan telescope 'Walter Baade' at the Las Campanas Observatory in Chile has been used for spot surveys of the GEO orbital regime to study the population of optically faint GEO debris. The goal is to estimate the size of the population of GEO debris at sizes much smaller than can be studied with 1-meter class telescopes. Despite the small size of the field of view of the Magellan instrument (diameter 0.5-degree), a significant population of objects fainter than R = 19th magnitude have been found with angular rates consistent with circular orbits at GEO. We compare the size of this population with the numbers of GEO objects found at brighter magnitudes by smaller telescopes. The observed detections have a wide range in characteristics starting with those appearing as short uniform streaks. But there are a substantial number of detections with variations in brightness, flashers, during the 5-second exposure. The duration of each of these flashes can be extremely brief: sometimes less than half a second. This is characteristic of a rapidly tumbling object with a quite variable projected size times albedo. If the albedo is of the order of 0.2, then the largest projected size of these objects is around 10-cm. The data in this paper was collected over the last several years using Magellan's IMACS camera in f/2 mode. The analysis shows the brightness bins for the observed GEO population as well as the periodicity of the flashers. All objects presented are correlated with the catalog: the focus of the paper will be on the uncorrelated, optically faint, objects. The goal of this project is to better characterize the faint debris population in GEO that access to a 6.5-m optical telescope in a superb site can provide.

Paradigm shift from cartography to geo-communication

DEFF Research Database (Denmark)

Brodersen, Lars

2007-01-01

This paper argues that the domain of GIS, cartography, geo-information etc. is facing a paradigm shift. The implication of a paradigm shift is a complete and necessary re-definition of e.g. the philosophical foundation of the system, as well as with a major upgrade and readjustment of procedures......-information is actually not possible at all without having a usage (a project identity and a purpose) in mind. Objective and neutral geo-information does not exist. Therefore the overall philosophy of the geo-domain will be that it is a communication discipline....

Evaluation of Heavy Metal Contamination Levels of Balok River Sediments in Pahang, Malaysia Based on Geo accumulation Index and Supported with Enrichment Factor

International Nuclear Information System (INIS)

Mohd Zahari Abdullah; Nur Rashidah Abd Manap; Ahmad Saat; Zaini Hamzah; Mohd Tahir Abas

2015-01-01

This study was conducted in order to assess the level of metal pollution in river sediment samples, which indirectly representing the general quality of the Balok River. The samples of river sediment have been collected at nine sampling stations from the particular river. The total content of Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, V and Zn were measured using inductively coupled plasma optical emission spectrometer (ICP-OES) after an acid extraction. The mean concentrations (mg/kg) were found at 0.49, 16.16, 42.93, 24.31, 2734.69, 155.61, 16.04, 29.31, 50.71 and 159.40 for the respective metals. The assessment of the river quality was done based on the information showed by the enrichment factor (EF) and geo accumulation index (I geo ). Analysis of the I geo indexes clearly indicate that most of the sediment samples analyzed in this study contained the selected heavy metals in the levels of unpolluted to moderately pollute. Based on the low EF values recorded in this study, it can be concluded that the Balok River sediments is not significantly contaminated with the studied heavy metals. (author)

Big Data, Small Data: Accessing and Manipulating Geoscience Data Ranging From Repositories to Student-Collected Data Sets Using GeoMapApp

Science.gov (United States)

Goodwillie, A. M.

2015-12-01

We often demand information and data to be accessible over the web at no cost, and no longer do we expect to spend time labouriously compiling data from myriad sources with frustratingly-different formats. Instead, we increasingly expect convenience and consolidation. Recent advances in web-enabled technologies and cyberinfrastructure are answering those calls by providing data tools and resources that can transform undergraduate education. By freeing up valuable classroom time, students can focus upon gaining deeper insights and understanding from real-world data. GeoMapApp (http://www.geomapapp.org) is a map-based data discovery and visualisation tool developed at Lamont-Doherty Earth Observatory. GeoMapApp promotes U-Learning by working across all major computer platforms and functioning anywhere with internet connectivity, by lowering socio-economic barriers (it is free), by seamlessly integrating thousands of built-in research-grade data sets under intuitive menus, and by being adaptable to a range of learning environments - from lab sessions, group projects, and homework assignments to in-class pop-ups. GeoMapApp caters to casual and specialist users alike. Contours, artificial illumination, 3-D displays, data point manipulations, cross-sectional profiles, and other display techniques help students better grasp the content and geospatial context of data. Layering capabilities allow easy data set comparisons. The core functionality also applies to imported data sets: Student-collected data can thus be imported and analysed using the same techniques. A new Save Session function allows educators to preserve a pre-loaded state of GeoMapApp. When shared with a class, the saved file allows every student to open GeoMapApp at exactly the same starting point from which to begin their data explorations. Examples of built-in data sets include seafloor crustal age, earthquake locations and focal mechanisms, analytical geochemistry, ocean water physical properties, US and

Users Manual for the Geospatial Stream Flow Model (GeoSFM)

Science.gov (United States)

Artan, Guleid A.; Asante, Kwabena; Smith, Jodie; Pervez, Md Shahriar; Entenmann, Debbie; Verdin, James P.; Rowland, James

2008-01-01

The monitoring of wide-area hydrologic events requires the manipulation of large amounts of geospatial and time series data into concise information products that characterize the location and magnitude of the event. To perform these manipulations, scientists at the U.S. Geological Survey Center for Earth Resources Observation and Science (EROS), with the cooperation of the U.S. Agency for International Development, Office of Foreign Disaster Assistance (USAID/OFDA), have implemented a hydrologic modeling system. The system includes a data assimilation component to generate data for a Geospatial Stream Flow Model (GeoSFM) that can be run operationally to identify and map wide-area streamflow anomalies. GeoSFM integrates a geographical information system (GIS) for geospatial preprocessing and postprocessing tasks and hydrologic modeling routines implemented as dynamically linked libraries (DLLs) for time series manipulations. Model results include maps that depicting the status of streamflow and soil water conditions. This Users Manual provides step-by-step instructions for running the model and for downloading and processing the input data required for initial model parameterization and daily operation.

Location Based Services and Applications

OpenAIRE

Elenis Gorrita Michel; Rónier Sierra Dávila; Samuel Montejo Sánchez

2012-01-01

Location Based Services (LBS) continue to grow in popularity, effectiveness and reliability, to the extent that applications are designed and implemented taking into account the facilities of the user location information. In this work, some of the main applications are addressed, in order to make an assessment of the current importance of the LBS, as a branch of technology in full swing. In addition, the main techniques for location estimation are studied, essential information to the LBS. B...

Spatial Footprints of Human Perceptual Experience in Geo-Social Media

Directory of Open Access Journals (Sweden)

Jun Lee

2018-02-01

Full Text Available Analyses of social media have increased in importance for understanding human behaviors, interests, and opinions. Business intelligence based on social media can reduce the costs of managing customer trend complexities. This paper focuses on analyzing sensation information representing human perceptual experiences in social media through the five senses: sight, hearing, touch, smell, and taste. First a measurement is defined to estimate social sensation intensities, and subsequently sensation characteristics on geo-social media are identified using geo-spatial footprints. Finally, we evaluate the accuracy and F-measure of our approach by comparing with baselines.

Photometrical Observations "SBIRS GEO-2"

Science.gov (United States)

Sukhov, P. P.; Epishev, V. P.; Karpenko, G. F.; Sukhov, K. P.; Kudak, V. I.

2015-08-01

Photometrical observations GSS "SBIRS GEO 2" in B,V,R filters were carried near the equinoxes 2014-2015. Used velocity electrophotometer based on the FEU-79 in the pulse-counting mode. Received more than 25 light curves. From the known dimensions are defined; effective reflecting area - Sγλ, the spectral reflectance index - γλ, periods of light variation. Color-indices showed that in the reflected light flux from the GSS prevails "red" component. In the light curves are periodically dips and specular flash. This shows that GSS orbit is not in a static position specified triaxial orientation as in dynamic motion. Assumed following dynamics of the satellite "SBIRS GEO 2" in orbit. Helical scanning the Earth's surface visible infrared sensors satellite occurs with a period P1 = 15.66 sec. and swinging of the GSS about the direction of the motion vector of the satellite in an orbit with P2 = 62.64 sec., from the northern to the southern pole. Thus, during the period of swinging GSS going on 2 scan the visible part of the northern and southern hemispheres. In some dates observations dynamics work satellite in orbit changed.

A Modeling Approach to Enhance Animal-Obtained Oceanographic Data Geo- Position

Science.gov (United States)

Tremblay, Y.; Robinson, P.; Weise, M. J.; Costa, D. P.

2006-12-01

Diving animals are increasingly being used as platforms to collect oceanographic data such as CTD profiles. Animal borne sensors provide an amazing amount of data that have to be spatially referenced. Because of technical limitations geo-position of these data mostly comes from the interpolation of locations obtained through the ARGOS positioning system. This system lacks spatio-temporal resolution compared to the Global Positioning System (GPS) and therefore, the positions of these oceanographic data are not well defined. A consequence of this is that many data collected in coastal regions are discarded, because many casts' records fell on land. Using modeling techniques, we propose a method to deal with this problem. The method is rather intuitive, and instead of deleting unreasonable or low-quality locations, it uses them by taking into account their lack of precision as a source of information. In a similar way, coastlines are used as sources of information, because marine animals do not travel over land. The method was evaluated using simultaneously obtained tracks with the Argos and GPS system. The tracks obtained from this method are considerably enhanced and allow a more accurate geo-reference of oceanographic data. In addition, the method provides a way to evaluate spatial errors for each cast that is not otherwise possible with classical filtering methods.

A Technical Survey on Optimization of Processing Geo Distributed Data

Science.gov (United States)

Naga Malleswari, T. Y. J.; Ushasukhanya, S.; Nithyakalyani, A.; Girija, S.

2018-04-01

With growing cloud services and technology, there is growth in some geographically distributed data centers to store large amounts of data. Analysis of geo-distributed data is required in various services for data processing, storage of essential information, etc., processing this geo-distributed data and performing analytics on this data is a challenging task. The distributed data processing is accompanied by issues in storage, computation and communication. The key issues to be dealt with are time efficiency, cost minimization, utility maximization. This paper describes various optimization methods like end-to-end multiphase, G-MR, etc., using the techniques like Map-Reduce, CDS (Community Detection based Scheduling), ROUT, Workload-Aware Scheduling, SAGE, AMP (Ant Colony Optimization) to handle these issues. In this paper various optimization methods and techniques used are analyzed. It has been observed that end-to end multiphase achieves time efficiency; Cost minimization concentrates to achieve Quality of Service, Computation and reduction of Communication cost. SAGE achieves performance improvisation in processing geo-distributed data sets.

Kennisagenda Geo-informatie: GISsen met beleid

OpenAIRE

Dessing, N.; Lips, F.; Hoogenboom, J.; Vullings, L.A.E.

2009-01-01

LNV wil méér geo-informatie inzetten bij de ontwikkeling en uitvoering van beleid en beleidsnota’s ruimer voorzien van kaartmateriaal. Dit betekent dat geo-informatie vaker moet worden benut om lokale knelpunten, mogelijkheden en de gevolgen van alternatieve oplossingen inzichtelijk te maken. Om dit te bereiken moet de beschikbaarheid van adequate data en gebruikersvriendelijke en nieuwe GIS-technieken aanmerkelijk verbeteren.

GeoMapApp Learning Activities: Grab-and-go inquiry-based geoscience activities that bring cutting-edge technology to the classroom

Science.gov (United States)

Goodwillie, A. M.; Kluge, S.

2011-12-01

NSF-funded GeoMapApp Learning Activities (http://serc.carleton.edu/geomapapp) provide self-contained learning opportunities that are centred around the principles of guided inquiry. The activities allow students to interact with and analyse research-quality geoscience data to explore and enhance student understanding of underlying geoscience content and concepts. Each activity offers ready-to-use step-by-step student instructions and answer sheets that can be downloaded from the web page. Also provided are annotated teacher versions of the worksheets that include teaching tips, additional content and suggestions for further work. Downloadable pre- and post- quizzes tied to each activity help educators gauge the learning progression of their students. Short multimedia tutorials and details on content alignment with state and national teaching standards round out the package of material that comprises each "grab-and-go" activity. GeoMapApp Learning Activities expose students to content and concepts typically found at the community college, high school and introductory undergraduate levels. The activities are based upon GeoMapApp (http://www.geomapapp.org), a free, easy-to-use map-based data exploration and visualisation tool that allows students to access a wide range of geoscience data sets in a virtual lab-like environment. Activities that have so far been created under this project include student exploration of seafloor spreading rates, a study of mass wasting as revealed through geomorphological evidence, and an analysis of plate motion and hotspot traces. The step-by-step instructions and guided inquiry approach lead students through each activity, thus reducing the need for teacher intervention whilst also boosting the time that students can spend on productive exploration and learning. The activities can be used, for example, in a classroom lab with the educator present and as self-paced assignments in an out-of-class setting. GeoMapApp Learning Activities

Characterisation of irradiation effect on geo-polymers

International Nuclear Information System (INIS)

Chupin, Frederic

2015-01-01

This study aims to improve knowledge about the radiation effect on geo-polymer behavior in terms of dihydrogen release and general strength in order to consider them as an alternative to usual nuclear waste cementitious coating matrices. Using various characterization techniques (nitrogen adsorption, low temperature DSC, FTIR and 1 H NMR spectroscopy) and by means of simulation irradiations (gamma, heavy ions), it has been shown that all the water present in the geo-polymer could be radiolyzed and that there was a confinement effect on the water radiolysis under low LET irradiation, probably due to efficient energy transfers from the solid matrix to the interstitial solution. Three dihydrogen production rates have been identified with the absorbed dose, depending on the concentration of dissolved dioxygen and the dihydrogen accumulation in the geo-polymer matrix. The good mechanical strength of the geo-polymer has been shown up to 9 MGy under gamma irradiation and is due to its high stability under irradiation. This could be explained by the fast recombination of the defects observed by EPR spectroscopy. However, phase crystallization was revealed during irradiation with heavy ions, which may induce some weakening of the geo-polymer network under alpha irradiation. The overall results helped to understand the phenomenology in a waste package under storage conditions. (author) [fr

High performance geospatial and climate data visualization using GeoJS

Science.gov (United States)

Chaudhary, A.; Beezley, J. D.

2015-12-01

GeoJS (https://github.com/OpenGeoscience/geojs) is an open-source library developed to support interactive scientific and geospatial visualization of climate and earth science datasets in a web environment. GeoJS has a convenient application programming interface (API) that enables users to harness the fast performance of WebGL and Canvas 2D APIs with sophisticated Scalable Vector Graphics (SVG) features in a consistent and convenient manner. We started the project in response to the need for an open-source JavaScript library that can combine traditional geographic information systems (GIS) and scientific visualization on the web. Many libraries, some of which are open source, support mapping or other GIS capabilities, but lack the features required to visualize scientific and other geospatial datasets. For instance, such libraries are not be capable of rendering climate plots from NetCDF files, and some libraries are limited in regards to geoinformatics (infovis in a geospatial environment). While libraries such as d3.js are extremely powerful for these kinds of plots, in order to integrate them into other GIS libraries, the construction of geoinformatics visualizations must be completed manually and separately, or the code must somehow be mixed in an unintuitive way.We developed GeoJS with the following motivations:• To create an open-source geovisualization and GIS library that combines scientific visualization with GIS and informatics• To develop an extensible library that can combine data from multiple sources and render them using multiple backends• To build a library that works well with existing scientific visualizations tools such as VTKWe have successfully deployed GeoJS-based applications for multiple domains across various projects. The ClimatePipes project funded by the Department of Energy, for example, used GeoJS to visualize NetCDF datasets from climate data archives. Other projects built visualizations using GeoJS for interactively exploring

Investigating the Feasibility of Geo-Tagged Photographs as Sources of Land Cover Input Data

Directory of Open Access Journals (Sweden)

Vyron Antoniou

2016-05-01

Full Text Available Geo-tagged photographs are used increasingly as a source of Volunteered Geographic Information (VGI, which could potentially be used for land use and land cover applications. The purpose of this paper is to analyze the feasibility of using this source of spatial information for three use cases related to land cover: Calibration, validation and verification. We first provide an inventory of the metadata that are collected with geo-tagged photographs and then consider what elements would be essential, desirable, or unnecessary for the aforementioned use cases. Geo-tagged photographs were then extracted from Flickr, Panoramio and Geograph for an area of London, UK, and classified based on their usefulness for land cover mapping including an analysis of the accompanying metadata. Finally, we discuss protocols for geo-tagged photographs for use of VGI in relation to land cover applications.

GeoSciGraph: An Ontological Framework for EarthCube Semantic Infrastructure

Science.gov (United States)

Gupta, A.; Schachne, A.; Condit, C.; Valentine, D.; Richard, S.; Zaslavsky, I.

2015-12-01

The CINERGI (Community Inventory of EarthCube Resources for Geosciences Interoperability) project compiles an inventory of a wide variety of earth science resources including documents, catalogs, vocabularies, data models, data services, process models, information repositories, domain-specific ontologies etc. developed by research groups and data practitioners. We have developed a multidisciplinary semantic framework called GeoSciGraph semantic ingration of earth science resources. An integrated ontology is constructed with Basic Formal Ontology (BFO) as its upper ontology and currently ingests multiple component ontologies including the SWEET ontology, GeoSciML's lithology ontology, Tematres controlled vocabulary server, GeoNames, GCMD vocabularies on equipment, platforms and institutions, software ontology, CUAHSI hydrology vocabulary, the environmental ontology (ENVO) and several more. These ontologies are connected through bridging axioms; GeoSciGraph identifies lexically close terms and creates equivalence class or subclass relationships between them after human verification. GeoSciGraph allows a community to create community-specific customizations of the integrated ontology. GeoSciGraph uses the Neo4J,a graph database that can hold several billion concepts and relationships. GeoSciGraph provides a number of REST services that can be called by other software modules like the CINERGI information augmentation pipeline. 1) Vocabulary services are used to find exact and approximate terms, term categories (community-provided clusters of terms e.g., measurement-related terms or environmental material related terms), synonyms, term definitions and annotations. 2) Lexical services are used for text parsing to find entities, which can then be included into the ontology by a domain expert. 3) Graph services provide the ability to perform traversal centric operations e.g., finding paths and neighborhoods which can be used to perform ontological operations like

A novel insight into beaconless geo-routing

KAUST Repository

Bader, Ahmed

2012-12-01

Beaconless geo-routing protocols have been traditionally analyzed assuming equal communication ranges for the data and control packets. This is not true in reality, since the communication range is in practice function of the packet length. As a consequence, a substantial discrepancy may exist between analytical and empirical results offered in beaconless geo-routing literature. Furthermore, performance of beaconless geo-routing protocols has typically considered using single-hop metrics only. End-to-end performance is considered in literature only occasionally and mainly in terms of simulation only. In this paper, we re-examine this class of protocols. We first incorporate practical packet detection models in order to capture the dependency of the communication range on the packet\\'s length. We then develop a detailed analytical framework for the end-to-end delay and energy performance of beaconless geo-routing protocols. Finally, we present two different application scenarios and study various tradeoffs in light of the framework developed. © 2012 IEEE.

Dealing with Insufficient Location Fingerprints in Wi-Fi Based Indoor Location Fingerprinting

Directory of Open Access Journals (Sweden)

Kai Dong

2017-01-01

Full Text Available The development of the Internet of Things has accelerated research in the indoor location fingerprinting technique, which provides value-added localization services for existing WLAN infrastructures without the need for any specialized hardware. The deployment of a fingerprinting based localization system requires an extremely large amount of measurements on received signal strength information to generate a location fingerprint database. Nonetheless, this requirement can rarely be satisfied in most indoor environments. In this paper, we target one but common situation when the collected measurements on received signal strength information are insufficient, and show limitations of existing location fingerprinting methods in dealing with inadequate location fingerprints. We also introduce a novel method to reduce noise in measuring the received signal strength based on the maximum likelihood estimation, and compute locations from inadequate location fingerprints by using the stochastic gradient descent algorithm. Our experiment results show that our proposed method can achieve better localization performance even when only a small quantity of RSS measurements is available. Especially when the number of observations at each location is small, our proposed method has evident superiority in localization accuracy.

IMPRESS: medical location-aware decision making during emergencies

Science.gov (United States)

Gkotsis, I.; Eftychidis, G.; Leventakis, G.; Mountzouris, M.; Diagourtas, D.; Kostaridis, A.; Hedel, R.; Olunczek, A.; Hahmann, S.

2017-09-01

Emergency situations and mass casualties involve several agencies and public authorities, which need to gather data from the incident scene and exchange geo-referenced information to provide fast and accurate first aid to the people in need. Tracking patients on their way to the hospitals can prove critical in taking lifesaving decisions. Increased and continuous flow of information combined by vital signs and geographic location of emergency victims can greatly reduce the response time of the medical emergency chain and improve the efficiency of disaster medicine activity. Recent advances in mobile positioning systems and telecommunications are providing the technology needed for the development of location-aware medical applications. IMPRESS is an advanced ICT platform based on adequate technologies for developing location-aware medical response during emergencies. The system incorporates mobile and fixed components that collect field data from diverse sources, support medical location and situation-based services and share information on the patient's transport from the field to the hospitals. In IMPRESS platform tracking of victims, ambulances and emergency services vehicles is integrated with medical, traffic and crisis management information into a common operational picture. The Incident Management component of the system manages operational resources together with patient tracking data that contain vital sign values and patient's status evolution. Thus, it can prioritize emergency transport decisions, based on medical and location-aware information. The solution combines positioning and information gathered and owned by various public services involved in MCIs or large-scale disasters. IMPRESS solution, were validated in field and table top exercises in cooperation with emergency services and hospitals.

A Concept Lattice for Semantic Integration of Geo-Ontologies Based on Weight of Inclusion Degree Importance and Information Entropy

Directory of Open Access Journals (Sweden)

Jia Xiao

2016-11-01

Full Text Available Constructing a merged concept lattice with formal concept analysis (FCA is an important research direction in the field of integrating multi-source geo-ontologies. Extracting essential geographical properties and reducing the concept lattice are two key points of previous research. A formal integration method is proposed to address the challenges in these two areas. We first extract essential properties from multi-source geo-ontologies and use FCA to build a merged formal context. Second, the combined importance weight of each single attribute of the formal context is calculated by introducing the inclusion degree importance from rough set theory and information entropy; then a weighted formal context is built from the merged formal context. Third, a combined weighted concept lattice is established from the weighted formal context with FCA and the importance weight value of every concept is defined as the sum of weight of attributes belonging to the concept’s intent. Finally, semantic granularity of concept is defined by its importance weight; we, then gradually reduce the weighted concept lattice by setting up diminishing threshold of semantic granularity. Additionally, all of those reduced lattices are organized into a regular hierarchy structure based on the threshold of semantic granularity. A workflow is designed to demonstrate this procedure. A case study is conducted to show feasibility and validity of this method and the procedure to integrate multi-source geo-ontologies.

Assessment of the detectability of geo-hazards using Google Earth applied to the Three Parallel Rivers Area, Yunnan province of China

Science.gov (United States)

Voermans, Michiel; Mao, Zhun; Baartman, Jantiene EM; Stokes, Alexia

2017-04-01

Anthropogenic activities such as hydropower, mining and road construction in mountainous areas can induce and intensify mass wasting geo-hazards (e.g. landslides, gullies, rockslides). This represses local safety and socio-economic development, and endangers biodiversity at larger scale. Until today, data and knowledge to construct geo-hazard databases for further assessments are lacking. This applies in particular to countries with a recently emerged rapid economic growth, where there are no previous hazard documentations and where means to gain data from e.g. intensive fieldwork or VHR satellite imagery and DEM processing are lacking. Google Earth (GE, https://www.google.com/earth/) is a freely available and relatively simple virtual globe, map and geographical information program, which is potentially useful in detecting geo-hazards. This research aimed at (i) testing the capability of Google Earth to detect locations of geo-hazards and (ii) identifying factors affecting the diagnosing quality of the detection, including effects of geo-hazard dimensions, environs setting and professional background and effort of GE users. This was tested on nine geo-hazard sites following road segments in the Three Parallel Rivers Area in the Yunnan province of China, where geo-hazards are frequently occurring. Along each road site, the position and size of each geo-hazard was measured in situ. Next, independent diagnosers with varying professional experience (students, researchers, engineers etc.) were invited to detect geo-hazard occurrence along each of the eight sites via GE. Finally, the inventory and diagnostic data were compared to validate the objectives. Rates of detected geo-hazards from 30 diagnosers ranged from 10% to 48%. No strong correlations were found between the type and size of the geo-hazards and their detection rates. Also the years of expertise of the diagnosers proved not to make a difference, opposite to what may be expected. Meanwhile the amount of time

Geo-ecological spatial pattern analysis of the island of Fogo (Cape Verde)

Science.gov (United States)

Olehowski, C.; Naumann, S.; Fischer, D.; Siegmund, A.

2008-12-01

With its small-scale climatic, floristic and geo-ecological differentiation, the island of Fogo is an optimal research area for understanding semi-arid island ecosystems in the marginal tropics. Because of the high variability in precipitation, the archipelago of Cape Verde has a potentially high ecological vulnerability, which is caused mainly by population growth, intensification of agricultural land use and increasing tourism. In this context, a geo-ecological spatial pattern analysis has been conducted for Fogo, including several types of geo-ecological layers like vegetation, elevation, aspect, soil and geology. The different kinds of spatial patterns that are detected can be used as a first tool to display distinctive levels of ecological vulnerability. These levels could constitute a base for sustainable land use planning and the redevelopment of agricultural strategies.

Rheological behavior of alkali-activated metakaolin during geo-polymerization

International Nuclear Information System (INIS)

Poulesquen, A.; Frizon, F.; Lambertin, D.

2011-01-01

The dynamic rheological behavior of geo-polymers, inorganic materials synthesized by activation of an aluminosilicate source by an alkaline solution, is described. The pastes studied were mixtures of an activation solution (alkali + silica) and metakaolin. The influence of the activation solution (NaOH vs. KOH), the silica (Aerosil vs. Tixosil), and the temperature on the evolution of the elastic modulus (G') and viscous modulus (G') over time were studied in the linear viscoelastic range. The results show that the nature of the silica has little influence on the viscous and elastic moduli when the geo-polymer is activated by KOH, and that the setting time is faster with sodium hydroxide and at higher temperatures regardless of the geo-polymer. In addition, during geo-polymerization the stepwise variation of the modulus values indicates that the formation of the 3D network occurs in several steps. Moreover, geo-polymers activated by potassium hydroxide exhibit slower kinetics but the interactions between constituents are stronger, as the loss tangent (tanδ = G''/G') is lower. Finally, the maximum loss tangent, tanδ, was also used as a criterion to determine the temperature dependence of the geo-polymers synthesized. This criterion is a precursor of the transition to the glassy state. The activation energies could thus be determined for the geo-polymers synthesized with potassium hydroxide or sodium hydroxide. (authors)

Modelling of Diffuse Failure and Fluidization in geo materials and Geo structures

International Nuclear Information System (INIS)

Pastor, M.

2013-01-01

Failure of geo structures is caused by changes in effective stresses induced by external loads (earthquakes, for instance), change in the pore pressures (rain), in the geometry (erosion), or in materials properties (chemical attack, degradation, weathering). Landslides can by analysed as the failure of a geo structure, the slope. There exist many alternative classifications of landslides can be analyzed as the failure of a geo structure, the slope. There exist many alternative classifications of landslides, but we will consider here a simple classification into slides and flows. In the case of slides, the failure consists on the movement of a part of the slope with deformations which concentrate in a narrow zone, the failure surface. This can be idealized as localized failure, and it is typical of over consolidated or dense materials exhibiting softening. On the other hand, flows are made of fluidized materials, flowing in a fluid like manner. This mechanism of failure is known as diffuse failure, and has received much less attention by researchers. Modelling of diffuse failure of slopes is complex, because there appear difficulties in the mathematical, constitutive and numerical models, which have to account for a phase transition. This work deals with modeling, and we will present here some tools recently developed by the author and the group to which he belongs. (Author)

GeoForum MV 2012. GIS schafft Energie. Contributions of geo-information science to the energy turnaround; GeoForum MV 2012. GIS schafft Energie. Beitraege der Geoinformationswirtschaft zur Energiewende

Energy Technology Data Exchange (ETDEWEB)

Bill, Ralf [Rostock Univ. (Germany). Professur fuer Geodaesie und Geoinformatik; Flach, Guntram [Fraunhofer IGD, Rostock (Germany); Klammer, Ulf; Lerche, Tobias (eds.) [GeoMV e.V. Verein der Geoinformationswirtschaft Mecklenburg-Vorpommern e.V., Rostock (Germany)

2012-07-01

Geo-information systems (GIS) have become indispensable in the development and implementation of concepts for enhanced use of renewable energy sources. Publications in geo-informatics so far have tended to focus on potential studies and regional planning aspects, but also on the establishment of land registers for energy sources and heat consumption. This year's GeoForum presented a comprehensive and concise picture of all these trends. Further subjects were discussed as well, i.e. 1. Logistics, eMobility and the development of individualised services in public transportation; 2. Geodata especially of Mecklenburg-Western Pomerania state and with a view to the power supply sector; 3. Basic technologies as current trends in INSPIRE with increasing data volumes and services will enhance their uses in the energy sector.

Using a Studio-Based Pedagogy to Engage Students in the Design of Mobile-Based Media

Science.gov (United States)

Mathews, James M.

2010-01-01

The article presents a brief overview of the Neighbourhood Game Design Project, a studio-based curriculum intervention aimed at engaging students in the design of place-based mobile games and interactive stories using geo-locative technologies (for example, GPS enabled cell phones). It describes the three curricular components that defined the…

Assessing the geo-electric characteristics of Basement Complex rocks and its implication for groundwater prospecting in Ilorin Metropolis, Nigeria

Directory of Open Access Journals (Sweden)

I. P. Ifabiyi

2016-12-01

Full Text Available In Basement Complex rocks where rainfall is seasonal, water provision in dry season depends on regolith aquifer. For effective exploitation of groundwater resources, it is reasonable that geophysical investigation be conducted before development of well. In many instances, geophysical surveys may be expensive or nonexistent. Hence, there is a need for spatial analysis which might advise water engineers within such environments. Vertical Electrical Soundings (VES data of 53 locations conducted with ABEM SAS-1000 terrameter using Schlumberger electrode configuration were obtained from the hydrogeology Department of Kwara state Ministry of Water Resources and Lower Niger River Basin and Rural Development Authority, Ilorin. VES locational coordinates were recorded using handheld GPS device. Sound curves were evaluated by partial curve matching approach and computer iteration using WinResist. The results depict six geo-electric regional successions, namely: top soil, lateritic clay, weathered basement, fairly-hard basement, thin fractured and hard basement. The geo-electric succession identified was plotted in Surfer 12 environment, using kriging interpolation method to show spatial distribution pattern of this zone. The spatial pattern is expected to give an insight to the nature of spatial variability of geo-electric layers and assist drillers as well as water resources policy makers in their operations.

GeoSciML and EarthResourceML Update, 2012

Science.gov (United States)

Richard, S. M.; Commissionthe Management; Application Inte, I.

2012-12-01

CGI Interoperability Working Group activities during 2012 include deployment of services using the GeoSciML-Portrayal schema, addition of new vocabularies to support properties added in version 3.0, improvements to server software for deploying services, introduction of EarthResourceML v.2 for mineral resources, and collaboration with the IUSS on a markup language for soils information. GeoSciML and EarthResourceML have been used as the basis for the INSPIRE Geology and Mineral Resources specifications respectively. GeoSciML-Portrayal is an OGC GML simple-feature application schema for presentation of geologic map unit, contact, and shear displacement structure (fault and ductile shear zone) descriptions in web map services. Use of standard vocabularies for geologic age and lithology enables map services using shared legends to achieve visual harmonization of maps provided by different services. New vocabularies have been added to the collection of CGI vocabularies provided to support interoperable GeoSciML services, and can be accessed through http://resource.geosciml.org. Concept URIs can be dereferenced to obtain SKOS rdf or html representations using the SISSVoc vocabulary service. New releases of the FOSS GeoServer application greatly improve support for complex XML feature schemas like GeoSciML, and the ArcGIS for INSPIRE extension implements similar complex feature support for ArcGIS Server. These improved server implementations greatly facilitate deploying GeoSciML services. EarthResourceML v2 adds features for information related to mining activities. SoilML provides an interchange format for soil material, soil profile, and terrain information. Work is underway to add GeoSciML to the portfolio of Open Geospatial Consortium (OGC) specifications.

Geo-engineering: a curse or a blessing?

NARCIS (Netherlands)

Wissenburg, M.L.J.

2016-01-01

In recent years, geo-engineering has been suggested as a viable strategy in dealing with climate change, the main indicator of what has become known as ‘the Anthropocene’. In this paper, I investigate the effects of geo-engineering in terms of freedom – not the only but perhaps the most important

Communication of geo-scientific safety arguments

International Nuclear Information System (INIS)

Flavelle, P.; Goodwin, B.; Jensen, M.; Linden, R.; Mazurek, M.; Srivastave, M.; Strom, A.; Sudicky, E.; Voinis, S.

2007-01-01

Working Group B addressed the communication of geo-scientific safety arguments through a discussion of practical experience as it related to the methods, types of information and specific arguments found to best communicate geo-scientific concepts and notions of safety with broad audiences including, colleagues, authorities and regulators, political decision makers, academics, and the general public. The following questions were suggested by the programme committee of the AMIGO-2 workshop for discussion by Working Group B with respect to the communication of geo-scientific information and safety arguments: - What is the place of geo-scientific arguments in relation to quantitative and qualitative topics like scenario and FEPs (features, events, processes) assessment, simulated repository evolution, calculated dose or risk impacts, engineering tests of materials, etc., when presenting a safety case to different audiences and with respect to the various stages of the repository programme? (see section 3). - Would we be better off focusing messages to the public on time scales of a few hundred years or a few generations? (see section 4). - How do you handle the fact that geoscience interpretations seldom are unique and data often are open to various interpretations? (see section 5). - How do you handle expert controversy on a specific topic? (see section 6). (authors)

Trace Gas Retrievals from the GeoTASO Aircraft Instrument

Science.gov (United States)

Nowlan, C. R.; Liu, X.; Leitch, J. W.; Liu, C.; Gonzalez Abad, G.; Chance, K.; Cole, J.; Delker, T.; Good, W. S.; Murcray, F.; Ruppert, L.; Soo, D.; Loughner, C.; Follette-Cook, M. B.; Janz, S. J.; Kowalewski, M. G.; Pickering, K. E.; Zoogman, P.; Al-Saadi, J. A.

2015-12-01

The Geostationary Trace gas and Aerosol Sensor Optimization (GeoTASO) instrument is a passive remote sensing instrument capable of making 2-D measurements of trace gases and aerosols from aircraft. The instrument measures backscattered UV and visible radiation, allowing the retrieval of trace gas amounts below the aircraft at horizontal resolutions on the order of 250 m x 250 m. GeoTASO was originally developed under NASA's Instrument Incubator Program as a test-bed instrument for the Geostationary Coastal and Air Pollution Events (GEO-CAPE) decadal survey mission, and is now also part of risk reduction for the upcoming Tropospheric Emissions: Monitoring of Pollution (TEMPO) and Geostationary Environment Monitoring Spectrometer (GEMS) geostationary satellite missions. We present spatially resolved observations of ozone, nitrogen dioxide, formaldehyde and sulfur dioxide over urban areas and power plants from flights during the DISCOVER-AQ field campaigns in Texas and Colorado, as well as comparisons with observations made by ground-based Pandora spectrometers, in situ monitoring instruments and other aircraft instruments deployed during these campaigns. These measurements at various times of day are providing a very useful data set for testing and improving TEMPO and GEMS retrieval algorithms, as well as demonstrating prototype validation strategies.

Value Assessment in Managing Cartography and Geo-communication

DEFF Research Database (Denmark)

Brodersen, Lars

2006-01-01

dramatic changes particularly within the following areas: technology, availability of geo-information, professional skills and mobility of labour, conventions as well as resources. It was recognized at the KMS that the existing professional skills and methods were no longer sufficient for the design...... and the management in modern cartography and in modern geo-spatial communication projects. It was recognized that there was a lack of adequate theories, models, methods and tech-niques. This forced the cartographers and the project managers to lock several parameters to well known values. One example...... is that the prevalent processes for design revision, if any, were based on historical conditions. Previously it was common praxis to make changes in each separate step of the whole process without recognizing the overall aspects of the entire process or the entire project. The aim of the project was to create...

Progress in Geo-Electrical Methods for Hydrogeological Mapping?

DEFF Research Database (Denmark)

Schrøder, Niels

2014-01-01

In most of the 20th century the geo-electrical methods were primarily used for groundwater exploration and the application of the methods were normally followed by a borehole, and a moment of truth. In this process the use of DC (direct current) soundings have been developed to a high grade...... of excellence. In the last 25 years the geo-electrical methods are more used in connection with groundwater protection and planning, and new methods, as transient electromagnetic (TEM) soundings, have been developed that provide more measurements per hour. In Denmark this change is very explicit, and a paper....... The test area was earlier mapped by DC-soundings, so it is possible to test the methods against each other. It is concluded that well performed DC-soundings with a Schlumberger configuration still provide the best base for hydrogeological mapping...

Territoriality and Consumption Behaviour with Location-based Media

DEFF Research Database (Denmark)

Tussyadiah, Iis

2012-01-01

The development in location-based mobile media has led to the popularity of its use for place experiences. This study explored the concept of territoriality, which is suggested as the underlying human behaviour that influences consumers’ mobility and experience stimulated by the social gaming...... feature of location-based media. From an exploratory investigation with a series of focus group discussions with users of location-based media, this study observed the activities of territorial tagging for the purposes of territorial claim and defence to gain and maintain the perceived territorial control...... over resources and rewards attached to certain places. The ability of location-based media to make the physical territory to interact with informational devices enables territorial behaviour to manifest in the consumption of local establishments, making location-based media a powerful tool...

Making the GeoConnection: Web 2.0-based support for early-career geoscientists (Invited)

Science.gov (United States)

Martinez, C. M.; Gonzales, L. M.; Keane, C. M.

2010-12-01

The US Bureau of Labor estimates that there will be an 18% increase in geoscience jobs between 2008 and 2018 in the United States, and demand for geoscientists is expected to rise worldwide as scientists tackle global challenges related to resources, hazards and climate. At the same time, the geoscience workforce is aging, with approximately half of the current workforce reaching retirement age within the next 10-15 years. A new generation of geoscientists must be ready to take the reins. To support this new generation, AGI’s geoscience workforce outreach programs were designed to help retain geoscience students through their degree programs and into careers in the field. These resources include support for early-career professional development and career planning. AGI’s GeoConnection Network for the Geosciences provides a venue for informal dissemination of career information and professional resources. The network links Web 2.0 platforms, including a Facebook page, YouTube Channel and Twitter feed, to build a robust geoscience community of geoscientists at all stages of their careers. Early-career geoscientists can participate in GeoConnection to network with other scientists, and to receive information about professional development and job opportunities. Through GeoConnection packets, students can join professional societies which will assist their transition from school to the workplace. AGI’s member societies provide professional development course work, field trips, career services, interviewing opportunities, and community meetings. As part of the GeoConnection Network, AGI hosts informational webinars to highlight new workforce data, discuss current affairs in the geosciences, and to provide information about geoscience careers. Between December 2009 and August 2010, AGI hosted 10 webinars, with more than 300 total participants for all the webinars, and 5 additional webinars are planned for the remainder of the year. The webinars offer early

GeoServer: il server geospaziale Open Source novità della nuova versione 2.3.0

Directory of Open Access Journals (Sweden)

Simone Giannecchini

2013-04-01

Full Text Available GeoServer è un server geospaziale Open Source sviluppato con tecnologia Java Enterprise per la gestione e l’editing di dati geospaziali secondo gli standard OGC e ISO Technical Committee 211. Esso fornisce le funzionalità di base per creareinfrastrutture spaziali di dati (SDI ed è progettato per essere interoperabile potendo pubblicare dati provenienti da ogni tipo di fonte spaziale utilizzando standard aperti.Open Source GeoSpatial server developed with Java Enterprise technology for managing, sharing and editing geospatial data according to the OGC and ISO TC 211 standards. GeoServer provides the basic functionalities to create spatial data infrastructures (SDI.GeoServer is designed for interoperability, it publishes data from any major spatial data source using open standards: it is the reference implementation of the Open Geospatial Consortium (OGC Web Feature Service (WFS and Web Coverage Service (WCS standards, as well as a highperformance certified compliant Web Map Service (WMS. GeoServer forms a core component of the Geospatial Web.

Plasmasphere and ring current electric fields observed by GEOS 2

International Nuclear Information System (INIS)

Schmidt, R.; Pedersen, A.

1988-01-01

The electric field double probe data from GEOS 2 have been statistically examined to study the consecutive passage of the afternoon plasmaspheric bulge and the trough at the geostationary orbit. It was found that the average location of the bulge depends on the magnetic activity and was encountered at earlier local times for higher magnetospheric activity. Within the bulge the electric field showed very frequently a typical directional change from dawnward outside to duskward inside the bulge. The magnitude of the magnetic field was frequently much smaller near the outbound crossing of the plasmaspheric bulge than is expected from a long-term average. The E x B/B-squared drift pointed azimuthally eastward prior to the encounter of the bulge and rotated into the sunward direction within the bulge. Following its passage through the dense, cold plasma in the bulge, GEOS 2 encountered a hot and tenuous plasma sheet-type plasma in the trough that occasionally corrupted the electric field measurements. Generally, the electric field in the trough is much smaller than in the bulge. A possible cause of the sunward plasma flow within the bulge is discussed on the basis of these data. 13 references

Automated vocabulary discovery for geo-parsing online epidemic intelligence.

Science.gov (United States)

Keller, Mikaela; Freifeld, Clark C; Brownstein, John S

2009-11-24

Automated surveillance of the Internet provides a timely and sensitive method for alerting on global emerging infectious disease threats. HealthMap is part of a new generation of online systems designed to monitor and visualize, on a real-time basis, disease outbreak alerts as reported by online news media and public health sources. HealthMap is of specific interest for national and international public health organizations and international travelers. A particular task that makes such a surveillance useful is the automated discovery of the geographic references contained in the retrieved outbreak alerts. This task is sometimes referred to as "geo-parsing". A typical approach to geo-parsing would demand an expensive training corpus of alerts manually tagged by a human. Given that human readers perform this kind of task by using both their lexical and contextual knowledge, we developed an approach which relies on a relatively small expert-built gazetteer, thus limiting the need of human input, but focuses on learning the context in which geographic references appear. We show in a set of experiments, that this approach exhibits a substantial capacity to discover geographic locations outside of its initial lexicon. The results of this analysis provide a framework for future automated global surveillance efforts that reduce manual input and improve timeliness of reporting.

An Assessment of GEO Orbital Debris Photometric Properties Derived from Laboratory-Based Measurements

Science.gov (United States)

Rodriquez-Cowardin, H.; Abercromby, K.; Barker, E.; Mulrooney, M.; Seitzer, P.; Schildknecht, T.

2009-01-01

Optical observations of orbital debris offer insights that differ from radar measurements (specifically the size parameter and wavelength regime). For example, time-dependent photometric data yield lightcurves in multiple bandpasses that aid in material identification and possible periodic orientations. This data can also be used to help identify shapes and optical properties at multiple phase angles. Capitalizing on optical data products and applying them to generate a more complete understanding of orbital space objects, is a key objective of NASA s Optical Measurement Program, and a primary driver for creation of the Optical Measurements Center (OMC). The OMC attempts to emulate space-based illumination conditions using equipment and techniques that parallel telescopic observations and source-target-sensor orientations. The OMC uses a 300 Watt Xenon arc lamp as a solar simulator, a CCD camera with Johnson/Bessel colored filters, and a robotic arm to orientate/rotate objects to simulate an object's orbit/rotational period. A high-resolution, high bandwidth (350nm-2500nm) Analytical Spectral Devices (ASD) spectrometer is also employed to baseline various material types. Since observation of GEO targets are generally restricted to the optical regime (due to radar range limitations), analysis of their properties is tailored to those revealed by optical data products. In this connection, much attention has been directed towards understanding the lightcurves of orbital debris with high area-to-mass (A/m) ratios (greater than 0.9 square meters per kilogram). A small population of GEO debris was recently identified, which exhibits the properties of high A/m objects, such as variable eccentricities and inclinations a dynamical characteristic generally resulting from varying solar radiation pressure on high A/m objects. Materials such as multi-layered insulation (MLI) and solar panels are two examples of materials with high area-to mass ratios. Lightcurves for such

Spectroscopic Characterization of GEO Satellites with Gunma LOW Resolution Spectrograph

Science.gov (United States)

Endo, T.; Ono, H.; Hosokawa, M.; Ando, T.; Takanezawa, T.; Hashimoto, O.

The spectroscopic observation is potentially a powerful tool for understanding the Geostationary Earth Orbit (GEO) objects. We present here the results of an investigation of energy spectra of GEO satellites obtained from a groundbased optical telescope. The spectroscopic observations were made from April to June 2016 with the Gunma LOW resolution Spectrograph and imager (GLOWS) at the Gunma Astronomical Observatory (GAO) in JAPAN. The observation targets consist of eleven different satellites: two weather satellites, four communications satellites, and five broadcasting satellites. All the spectra of those GEO satellites are inferred to be solar-like. A number of well-known absorption features such as H-alpha, H-beta, Na-D,water vapor and oxygen molecules are clearly seen in thewavelength range of 4,000 - 8,000 Å. For comparison, we calculated the intensity ratio of the spectra of GEO satellites to that of the Moon which is the natural satellite of the earth. As a result, the following characteristics were obtained. 1) Some variations are seen in the strength of absorption features of water vapor and oxygen originated by the telluric atmosphere, but any other characteristic absorption features were not found. 2) For all observed satellites, the intensity ratio of the spectrum of GEO satellites decrease as a function of wavelength or to be flat. It means that the spectral reflectance of satellite materials is bluer than that of the Moon. 3) A characteristic dip at around 4,800 Å is found in all observed spectra of a weather satellite. Based on these observations, it is indicated that the characteristics of the spectrum are mainly derived from the solar panels because the apparent area of the solar cell is probably larger than that of the satellite body.

An Overview of the GEOS-5 Aerosol Reanalysis

Science.gov (United States)

da Silva, Arlindo; Colarco, Peter Richard; Damenov, Anton Spasov; Buchard-Marchant, Virginie; Randles, Cynthia A.; Gupta, Pawan

2011-01-01

GEOS-5 is the latest version of the NASA Global Modeling and Assimilation Office (GMAO) earth system model. GEOS-5 contains components for atmospheric circulation and composition (including data assimilation), ocean circulation and biogeochemistry, and land surface processes. In addition to traditional meteorological parameters, GEOS-5 includes modules representing the atmospheric composition, most notably aerosols and tropospheric/stratospheric chemical constituents, taking explicit account of the impact of these constituents on the radiative processes of the atmosphere. MERRA is a NASA meteorological reanalysis for the satellite era (1979-present) using GEOS-5. This project focuses on historical analyses of the hydrological cycle on a broad range of weather and climate time scales. As a first step towards an integrated Earth System Analysis (IESA), the GMAO is extending MERRA with reanalyses for other components of the earth system: land, ocean, bio-geochemistry and atmospheric constituents. In this talk we will present results from the MERRA-driven aerosol reanalysis covering the Aqua period (2003-present). The assimilation of Aerosol Optical Depth (AOD) in GEOS-5 involves very careful cloud screening and homogenization of the observing system by means of a Neural Net scheme that translates MODIS radiances into AERONET calibrated AOD. These measurements are further quality controlled using an adaptive buddy check scheme, and assimilated using the Local Displacement Ensemble (LDE) methodology. For this reanalysis, GEOS-5 runs at a nominal 50km horizontal resolution with 72 vertical layers (top at approx. 8Skm). GEOS-5 is driven by daily biomass burning emissions derived from MODIS fire radiative power retrievals. We will present a summary of our efforts to validate such dataset. The GEOS-5 assimilated aerosol fields are first validated by comparison to independent in-situ measurements (AERONET and PM2.5 surface concentrations). In order to asses aerosol

Systemic determinants of modern gravitational processes in the geo-economic space

Directory of Open Access Journals (Sweden)

Zoryana Lutsyshyn

2015-12-01

Full Text Available From the compositional point of view, research on this topic has revealed two main directions: (1 an analysis of global development asymmetry that has activated gravitational processes in geo-economic space; and (2 a direction that focuses on the profound study of the causes for heterogeneity in geo-economic space and divergence in global development under the influence of gravitational factors of nature on the endogenousexogenous axis. Systemic determinants of gravitational processes are revealed in geo- economic space and the asymmetry of global activate ravitional processes in geo-economic space are observed, and methodological interconnectedness coinfluence of two complementary determinants of global development – convergence and divergence and the contradiction between them are examined, which at the same time underlie the inevitable internal contradictions of the process, creating conditions for further configuration of the «new globalization community», which is built on the principles of nonlinear dynamics and logic gravitational processes in geo-economic space.Taking into account the relevant uncertainties, the attention is focused on the isolation of several myths around which the debate that has important methodological significance in the context of the current global inter-system transformations is held. Geostrategic matrix divergence of global development is produced,which is based on techniques which incorporated cluster analysisthat are built on linguistic variables and integrated analysis of the key trends of country and global development geostrategic position of Ukraine in geo-economic space in the projection on the issues of global inter-system transformations isoutlined .It is proved that the level of gravity load increases in the deepening of the global asymmetries , and that the current global transformation is not yet complete, and polycentric new architecture geospace is not formed. In the near future we should

Spectroscopic Observations of Geo-Stationary Satellites Over the Korean Peninsula

Directory of Open Access Journals (Sweden)

D. K. Lee

2001-11-01

Full Text Available Low resolution spectroscopic observations of geo-stationary satellites over the Korean peninsula have been carried out at the KyungHee Optical Satellite Observing Facility (KOSOF with a 40cm telescope. We have observed 9 telecommunication satellites and 1 weather satellite of 6 countries. The obtained spectral data showed that satellites could be classified and grouped with similar basic spectral feature. We divided the 10 satellites into 4 groups based on spectral slop and reflectance. It is suggested that the material types of the satellites can be determined through spectral comparisons with the ground laboratory data. We will continuously observe additional geo-stationary satellites for the accurate classification of spectral features.

The influence of locative media on social information sharing: a review

NARCIS (Netherlands)

Keijl, Edwin; Klaassen, Randy; op den Akker, Hendrikus J.A.

2013-01-01

Mobile phones and social media enable people to share information with others whenever they want, wherever they want. More recent developments allow people to augment their sharing experience by geo-tagging their information through GPS enabled phones. These 'locative media' can be used to

Overt and covert attention to location-based reward.

Science.gov (United States)

McCoy, Brónagh; Theeuwes, Jan

2018-01-01

Recent research on the impact of location-based reward on attentional orienting has indicated that reward factors play an influential role in spatial priority maps. The current study investigated whether and how reward associations based on spatial location translate from overt eye movements to covert attention. If reward associations can be tied to locations in space, and if overt and covert attention rely on similar overlapping neuronal populations, then both overt and covert attentional measures should display similar spatial-based reward learning. Our results suggest that location- and reward-based changes in one attentional domain do not lead to similar changes in the other. Specifically, although we found similar improvements at differentially rewarded locations during overt attentional learning, this translated to the least improvement at a highly rewarded location during covert attention. We interpret this as the result of an increased motivational link between the high reward location and the trained eye movement response acquired during learning, leading to a relative slowing during covert attention when the eyes remained fixated and the saccade response was suppressed. In a second experiment participants were not required to keep fixated during the covert attention task and we no longer observed relative slowing at the high reward location. Furthermore, the second experiment revealed no covert spatial priority of rewarded locations. We conclude that the transfer of location-based reward associations is intimately linked with the reward-modulated motor response employed during learning, and alternative attentional and task contexts may interfere with learned spatial priorities. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

Calibration of GEO 600 for the S1 science run

International Nuclear Information System (INIS)

Hewitson, M; Grote, H; Heinzel, G; Strain, K A; Ward, H; Weiland, U

2003-01-01

In 2002, the interferometric gravitational wave detector GEO 600 took part in a coincident science run (S1) with other detectors world-wide. When completed, GEO will employ a dual-recycling scheme which will allow its peak sensitivity to be tuned over a range of frequencies in the detection band. Still in the commissioning phase, GEO was operated as a power-recycled Michelson for the duration of S1. The accurate calibration of the sensitivity of GEO to gravitational waves is a critical step in preparing GEO data for exchange with other detectors forming a world-wide detector network. An online calibration scheme has been developed to perform real-time calibration of the power-recycled GEO detector. This scheme will later be extended to cover the more complex case of the dual-recycled interferometer in which multiple output signals will need to be combined to optimally recover a calibrated strain channel. This report presents an outline of the calibration scheme that was used during S1. Also presented are results of detector characterization work that arises naturally from the calibration work

GeoFORCE Alaska: Four-Year Field Program Brings Rural Alaskan High School Students into the STEM Pipeline

Science.gov (United States)

Fowell, S. J.; Rittgers, A.; Stephens, L.; Hutchinson, S.; Peters, H.; Snow, E.; Wartes, D.

2016-12-01

GeoFORCE Alaska is a four-year, field-based, summer geoscience program designed to raise graduation rates in rural Alaskan high schools, encourage participants to pursue college degrees, and increase the diversity of Alaska's technical workforce. Residents of predominantly Alaska Native villages holding degrees in science, technology, engineering, or math (STEM) bring valuable perspectives to decisions regarding management of cultural and natural resources. However, between 2010 and 2015 the average dropout rate for students in grades 7-12 was 8.5% per year in the North Slope School District and 7% per year in the Northwest Arctic School District. 2015 graduation rates were 70% and 75%, respectively. Statewide statistics highlight the challenge for Alaska Native students. During the 2014-2015 school year alone 37.6% of Alaska Native students dropped out of Alaskan public schools. At the college level, Alaska Native students are underrepresented in University of Alaska Fairbanks (UAF) science departments. Launched in 2012 by UAF in partnership with the longstanding University of Texas at Austin program, GeoFORCE applies the cohort model, leading the same group of high school students on geological field academies during four consecutive summers. Through a combination of active learning, teamwork, and hands-on projects at spectacular geological locations, students gain academic skills and confidence that facilitate high school and college success. To date, GeoFORCE Alaska has recruited two cohorts. 78% of these students identify as Alaska Native, reflecting community demographics. The inaugural cohort of 18 students from the North Slope Borough completed the Fourth-Year Academy in summer 2015. 94% of these students graduated from high school, at least 72% plan to attend college, and 33% will major in geoscience. A second cohort of 34 rising 9th and 10th graders entered the program in 2016. At the request of corporate sponsors, this cohort was recruited from both the

Characterization of ginger essential oil/palygorskite composite (GEO-PGS) and its anti-bacteria activity.

Science.gov (United States)

Lei, Hong; Wei, Qiaonian; Wang, Qing; Su, Anxiang; Xue, Mei; Liu, Qin; Hu, Qiuhui

2017-04-01

To explore a novel kind of anti-bacterial composite material having the excellent antibacterial ability, stability and specific-targeting capability, palygorskite (PGS) was used as the carrier of ginger essential oil (GEO) and a novel kind of composite GEO-PGS was prepared by ion exchange process. The characterization and the antibacterial activity of GEO-PGS was investigated in this study. Results of FTIR, XPS, XRD,TG analysis and SEM observation demonstrated the combination of GEO and PGS, GEO was absorbed on the surface of PGS, and the content of GEO in the composite was estimated to be 18.66%. Results of minimal inhibitory concentration (MIC) analysis, growth curve and Gram staining analysis of Staphylococci aureus and Escherichia coli exposed to GEO-PGS showed that GEO-PGS had much higher antibacterial activity than GEO, and GEO-PGS had the specific-targeting antibacterial capability. Moreover, GEO-PGS showed the characteristics of thermo-stability, acidity and alkalinity-resistance in exerting its anti-bacteria activity. In conclusion, the novel composite GEO-PGS combined the bacteria-absorbent activity of PGS and the antibacterial activity of GEO, suggesting the great potential application of GEO-PGS as the novel composite substance with high antibacterial activity. Copyright © 2016 Elsevier B.V. All rights reserved.

The ConnectinGEO Observation Inventory

Science.gov (United States)

Santoro, M.; Nativi, S.; Jirka, S.; McCallum, I.

2016-12-01

ConnectinGEO (Coordinating an Observation Network of Networks EnCompassing saTellite and IN-situ to fill the Gaps in European Observations) is an EU-funded project under the H2020 Framework Programme. The primary goal of the project is to link existing coordinated Earth Observation networks with science and technology (S&T) communities, the industry sector and the GEOSS and Copernicus stakeholders. An expected outcome of the project is a prioritized list of critical gaps within GEOSS (Global Earth Observation System of Systems) in observations and models that translate observations into practice relevant knowledge. The project defines and utilizes a formalized methodology to create a set of observation requirements that will be related to information on available observations to identify key gaps. Gaps in the information provided by current observation systems as well as gaps in the systems themselves will be derived from five different threads. One of these threads consists in the analysis of the observations and measurements that are currently registered in GEO Discovery and Access Broker (DAB). To this aim, an Observation Inventory (OI) has been created and populated using the current metadata information harmonized by the DAB. This presentation describes the process defined to populate the ConnectinGEO OI and the resulting system architecture. In addition, it provides information on how to systematically access the OI for performing the gap analysis. Furthermore it demonstrates initial findings of the gap analysis, and shortcomings in the metadata that need attention. The research leading to these results benefited from funding by the European Union H2020 Framework Programme under grant agreement n. 641538 (ConnectinGEO).

Indoor location-based services prerequisites and foundations

CERN Document Server

Werner, Martin

2014-01-01

This book delivers concise coverage of classical methods and new developments related to indoor location-based services. It collects results from isolated domains including geometry, artificial intelligence, statistics, cooperative algorithms, and distributed systems and thus provides an accessible overview of fundamental methods and technologies. This makes it an ideal starting point for researchers, students, and professionals in pervasive computing. Location-based services are services using the location of a mobile computing device as their primary input. While such services are fairly e

Evaluation of NASA GEOS-ADAS Modeled Diurnal Warming Through Comparisons to SEVIRI and AMSR2 SST Observations

Science.gov (United States)

Gentemann, C. L.; Akella, S.

2018-02-01

An analysis of the ocean skin Sea Surface Temperature (SST) has been included in the Goddard Earth Observing System (GEOS) - Atmospheric Data Assimilation System (ADAS), Version 5 (GEOS-ADAS). This analysis is based on the GEOS atmospheric general circulation model (AGCM) that simulates near-surface diurnal warming and cool skin effects. Analysis for the skin SST is performed along with the atmospheric state, including Advanced Very High Resolution Radiometer (AVHRR) satellite radiance observations as part of the data assimilation system. One month (September, 2015) of GEOS-ADAS SSTs were compared to collocated satellite Spinning Enhanced Visible and InfraRed Imager (SEVIRI) and Advanced Microwave Scanning Radiometer 2 (AMSR2) SSTs to examine how the GEOS-ADAS diurnal warming compares to the satellite measured warming. The spatial distribution of warming compares well to the satellite observed distributions. Specific diurnal events are analyzed to examine variability within a single day. The dependence of diurnal warming on wind speed, time of day, and daily average insolation is also examined. Overall the magnitude of GEOS-ADAS warming is similar to the warming inferred from satellite retrievals, but several weaknesses in the GEOS-AGCM simulated diurnal warming are identified and directly related back to specific features in the formulation of the diurnal warming model.

Perancangan Aplikasi GEO-Location Sharing Dengan Location Based Service Pada Sistem Operasi Android

Directory of Open Access Journals (Sweden)

Kathryn Widhiyanti

2014-07-01

Full Text Available Jurnal berikut menyajikan implementasi dari Global Positioning System (GPS dan Google Cloud Messaging (GCM pada Sistem Sales Force Management (SFM. Global Positioning System(GPS yang selama ini digunakan sebagai penunjuk arah, dapat diterapkan untuk sebuah perusahaan dalam melakukan pelacakan pekerja lapanganannya. Koordinat GPS dapat menjadi media informasi yang mudah diakses dan cukup akurat dalam penggunaannya. Dalam tugas akhir ini diterapkan penggunaan GPS dalam sistem absensi kunjungan salesman ke toko. GPS diimplementasikan didalam program Android dengan menggunakan PHP sebagai Back-End Server. Penyampaian informasi dan notifikasi secara cepat dan tepat dibutuhkan dalam komunikasi antara Android dan PHP, maka dalam pengembangannya dibutuhkan Google Cloud Messaging(GCM yang menjadi jembatan komunikasi antara Client dan Web Server. Integrasi antara Android dan PHP sendiri dapat menjadi sebuah pengembangan teknologi yang baik dalam penggunaanya, dimana keduanya mendukung pertukaran informasi secara cepat melalui internet.

Hybridization of Environmental Microbial Community Nucleic Acids by GeoChip.

Science.gov (United States)

Van Nostrand, Joy D; Yin, Huaqin; Wu, Liyou; Yuan, Tong; Zhou, Jizhong

2016-01-01

Functional gene arrays, like the GeoChip, allow for the study of tens of thousands of genes in a single assay. The GeoChip array (5.0) contains probes for genes involved in geochemical cycling (N, C, S, and P), metal homeostasis, stress response, organic contaminant degradation, antibiotic resistance, secondary metabolism, and virulence factors as well as genes specific for fungi, protists, and viruses. Here, we briefly describe GeoChip design strategies (gene selection and probe design) and discuss minimum quantity and quality requirements for nucleic acids. We then provide detailed protocols for amplification, labeling, and hybridization of samples to the GeoChip.

GeoSciML v3.0 - a significant upgrade of the CGI-IUGS geoscience data model

Science.gov (United States)

Raymond, O.; Duclaux, G.; Boisvert, E.; Cipolloni, C.; Cox, S.; Laxton, J.; Letourneau, F.; Richard, S.; Ritchie, A.; Sen, M.; Serrano, J.-J.; Simons, B.; Vuollo, J.

2012-04-01

analytical data using the Observations and Measurements (ISO19156) and SWE Common v2 models. The GeoSciML v3 data model does not include vocabularies to support the data model. However, it does provide a standard pattern to reference controlled vocabulary concepts using HTTP-URIs. The international GeoSciML community has developed distributed RDF-based geoscience vocabularies that can be accessed by GeoSciML web services using the standard pattern recommended in GeoSciML v3. GeoSciML v3 is the first version of GeoSciML that will be accompanied by web service validation tools using Schematron rules. For example, these validation tools may check for compliance of a web service to a particular profile of GeoSciML, or for logical consistency of data content that cannot be enforced by the application schemas. This validation process will support accreditation of GeoSciML services and a higher degree of semantic interoperability. * International Union of Geological Sciences Commission for Management and Application of Geoscience Information (CGI-IUGS)

Geo-Seas - building a unified e-infrastructure for marine geoscientific data management in Europe

Science.gov (United States)

Glaves, H.; Schaap, D.

2012-04-01

A significant barrier to marine geoscientific research in Europe is the lack of standardised marine geological and geophysical data and data products which could potentially facilitate multidisciplinary marine research extending across national and international boundaries. Although there are large volumes of geological and geophysical data available for the marine environment it is currently very difficult to use these datasets in an integrated way due to different nomenclatures, formats, scales and coordinate systems being used within different organisations as well as between countries. This makes the direct use of primary data very difficult and also hampers use of the data to produce integrated multidisciplinary data products and services. The Geo-Seas project, an EU Framework 7 funded initiative, is developing a unified e-infrastructure to facilitate the sharing of marine geoscientific data within Europe. This e-infrastructure is providing on-line access to both discovery metadata and the associated federated data sets from 26 European data centres via a dedicated portal. The implementation of the Geo-Seas portal is allowing a range of end users to locate, assess and access standardised geoscientific data from multiple sources which is interoperable with other marine data types. Geo-Seas is building on the work already done by the existing SeaDataNet project which currently provides a data management e-infrastructure for oceanographic data which allows users to locate and access federated oceanographic data sets. By adopting and adapting the SeaDataNet methodologies and technologies the Geo-Seas project has not only avoid unnecessary duplication of effort by reusing existing and proven technologies but also contributed to the development of a multidisciplinary approach to ocean science across Europe through the creation of a joint infrastructure for both marine geoscientific and oceanographic data. This approach is also leading to the development of

A Location-Based Business Information Recommendation Algorithm

Directory of Open Access Journals (Sweden)

Shudong Liu

2015-01-01

Full Text Available Recently, many researches on information (e.g., POI, ADs recommendation based on location have been done in both research and industry. In this paper, we firstly construct a region-based location graph (RLG, in which region node respectively connects with user node and business information node, and then we propose a location-based recommendation algorithm based on RLG, which can combine with user short-ranged mobility formed by daily activity and long-distance mobility formed by social network ties and sequentially can recommend local business information and long-distance business information to users. Moreover, it can combine user-based collaborative filtering with item-based collaborative filtering, and it can alleviate cold start problem which traditional recommender systems often suffer from. Empirical studies from large-scale real-world data from Yelp demonstrate that our method outperforms other methods on the aspect of recommendation accuracy.

GeoWall use in an Introductory Geology laboratory: Impacts in Student Understanding of Field Mapping Concepts

Science.gov (United States)

Ross, L. E.; Kelly, M.; Springer, A. E.

2003-12-01

In the Fall semester of 2003, Northern Arizona University will introduce the GeoWall to its introductory geology courses. This presents an opportunity to assess the impact of this new technology on students' understanding of basic topographic concepts and the spatial relationships between geology, topography, and hydrology on a field trip. Introductory Geology fulfills the Lab Science component of the Liberal Studies Program at Northern Arizona University. The class is open to all Northern Arizona University students, and is most commonly taken by non-science majors. In this class students learn to: locate their position using maps, identify common minerals and rocks, recognize the relationship between geology and geomorphology, visualize how rocks exposed at the surface continue into the subsurface, and to draw conclusions about possible geologic hazards in different settings. In this study we will report how a GeoWall 3D visualization technology was used in a field study of a graben south of Flagstaff. The goal of the field exercise is to improve students' ability to synthesize data collected at field stops into a conceptual model of the graben, linking geology, geomorphology and hydrology. We plan to present a quantitative assessment of the GeoWall learning objectives from data collected from a paired test and control group of students. Teaching assistants (TAs) with two or more lab classes have been identified; these TAs will participate in both GeoWall and non-GeoWall lab exercises. The GeoWall use will occur outside of normal lab hours to avoid disrupting the lab schedule during the eighth week of lab. This field preparation exercise includes a 3D visualization of the Lake Mary graben rendered with the ROMA software. The following week, all students attend the graben field trip; immediately following the trip, students will interviewed about their gain in understanding of the geologic features illustrated during the field trip. The results of the post

GeoSearch: a new virtual globe application for the submission, storage, and sharing of point-based ecological data

Science.gov (United States)

Cardille, J. A.; Gonzales, R.; Parrott, L.; Bai, J.

2009-12-01

of ecological measurements in forests; we expect to extend the approach to a Quebec lake research network encompassing decades of lake measurements. In this session, we will describe and present four related components of the new system: GeoSearch’s globe-based searching and display of scientific data; prefuse-based visualization of social connections among members of a scientific research network; geolocation of research projects using Google Spreadsheets, KML, and Google Earth/Maps; and collaborative construction of a geolocated database of research articles. Each component is designed to have applications for scientists themselves as well as the general public. Although each implementation is in its infancy, we believe they could be useful to other researcher networks.

Estimation of the Ocean Skin Temperature using the NASA GEOS Atmospheric Data Assimilation System

Science.gov (United States)

Koster, Randal D.; Akella, Santha; Todling, Ricardo; Suarez, Max

2016-01-01

This report documents the status of the development of a sea surface temperature (SST) analysis for the Goddard Earth Observing System (GEOS) Version-5 atmospheric data assimilation system (ADAS). Its implementation is part of the steps being taken toward the development of an integrated earth system analysis. Currently, GEOS-ADAS SST is a bulk ocean temperature (from ocean boundary conditions), and is almost identical to the skin sea surface temperature. Here we describe changes to the atmosphere-ocean interface layer of the GEOS-atmospheric general circulation model (AGCM) to include near surface diurnal warming and cool-skin effects. We also added SST relevant Advanced Very High Resolution Radiometer (AVHRR) observations to the GEOS-ADAS observing system. We provide a detailed description of our analysis of these observations, along with the modifications to the interface between the GEOS atmospheric general circulation model, gridpoint statistical interpolation-based atmospheric analysis and the community radiative transfer model. Our experiments (with and without these changes) show improved assimilation of satellite radiance observations. We obtained a closer fit to withheld, in-situ buoys measuring near-surface SST. Evaluation of forecast skill scores corroborate improvements seen in the observation fits. Along with a discussion of our results, we also include directions for future work.

GeoBus: sharing science research with schools

Science.gov (United States)

Roper, Kathryn; Robinson, Ruth; Moorhouse, Ben

2016-04-01

GeoBus (www.geobus.org.uk) is an educational outreach project that was developed in 2012 by the Department of Earth and Environmental Sciences at the University of St Andrews, and it is currently sponsored by industry, NERC, The Crown Estate, and the Scottish Government. The aims of GeoBus are to support the teaching of Earth Science in secondary (middle and high) schools by providing teaching support to schools that have little or no experience in teaching this subject. This is, in part, done through the sharing of new science research outcomes and the experiences of young researchers with school pupils to provide a bridge between industry, higher education institutions, research councils and schools. Since its launch, over 40,000 pupils will have been involved in experiential Earth science learning activities in 190 different schools (over 400 separate visits) across the length and breadth of Scotland: many of these schools are in remote and disadvantaged regions. A new GeoBus project is under development within the Department of Earth Sciences at UCL in London. A key aim of GeoBus is to incorporate new research into our workshops with the main challenge being the development of appropriate resources that incorporate the key learning aims and requirements of the science and geography curricula. GeoBus works closely with researchers, teachers and educational practitioners to tailor the research outcomes to the curricula as much as possible. Over the past four years, GeoBus has developed 17 workshops, 5 challenge events and extensive field trips and each of these activities are trialled and evaluated within the university, and adjustments are made before the activities are delivered in schools. Activities are continually reviewed and further developments are made in response to both teacher and pupil feedback. This critical reflection of the project's success and impact is important to insure a positive and significant contribution to the science learning in

A note on the optimal pricing strategy in the discrete-time Geo/Geo/1 queuing system with sojourn time-dependent reward

Directory of Open Access Journals (Sweden)

Doo Ho Lee

Full Text Available This work studies the optimal pricing strategy in a discrete-time Geo/Geo/1 queuing system under the sojourn time-dependent reward. We consider two types of pricing schemes. The first one is called the ex-post payment scheme where the server charges a price that is proportional to the time a customer spends in the system, and the second one is called ex-ante payment scheme where the server charges a flat price for all services. In each pricing scheme, a departing customer receives the reward that is inversely proportional to his/her sojourn time. The server should make the optimal pricing decisions in order to maximize its expected profits per time unit in each pricing scheme. This work also investigates customer's equilibrium joining or balking behavior under server's optimal pricing strategy. Numerical experiments are also conducted to validate our analysis. Keywords: Optimal pricing, Equilibrium behavior, Geo/Geo/1 queue, Sojourn time-dependent reward

Geo-Seas: delivering harmonised marine geoscience data on a European scale

Science.gov (United States)

Glaves, Helen; Schaap, Dick

2013-04-01

A large amount of both raw and interpreted marine geoscience data is held by an array of European organisations but its discovery and re-use can be very difficult. The data is stored in a variety of different formats and a range of different nomenclatures, scales and co-ordinate systems are used at the organisational, national and international level. This lack of standardisation hinders the user's ability to locate and access these datasets or to use them in an integrated way. The Geo-Seas project, an EU funded Framework 7 initiative, has addressed these barriers to the re-use of marine geological and geophysical data through the development of an on-line data discovery and access service (http://www.geo-seas.eu). It allows the end user to identify, evaluate and download a range of standardised marine geoscience data sets from 26 federated data centres across 17 European maritime countries. The dedicated portal, which currently provides access to more than 100,000 datasets, has been developed by adopting and adapting the existing technologies, standards and methodologies developed by the SeaDataNet project for the management and delivery of oceanographic data. Through the re-use of this pre-existing architecture including the associated common standards and vocabularies a joint infrastructure for both marine geoscientific and oceanographic data has been created which supports the development of multidisciplinary ocean science. The Geo-Seas project has also brought together and incorporated the metadata services developed by previous EU-funded projects such as EUSeaSed and SEISCAN. The formats of this legacy metadata have not only been used as the basis for developing the Geo-Seas metadatabase but it has also lead to these pre-existing metadata catalogues being upgraded to current international standards. The Geo-Seas initiative has lead to a major improvement in the availability of standardised marine geoscientific data throughout Europe allowing end users better

Spatial assessment of Geo-environmental data by the integration of Remote Sensing and GIS techniques for Sitakund Region, Eastern foldbelt, Bangladesh.

Science.gov (United States)

Gazi, M. Y.; Rahman, M.; Islam, M. A.; Kabir, S. M. M.

2016-12-01

Techniques of remote sensing and geographic information systems (GIS) have been applied for the analysis and interpretation of the Geo-environmental assessment to Sitakund area, located within the administrative boundaries of the Chittagong district, Bangladesh. Landsat ETM+ image with a ground resolution of 30-meter and Digital Elevation Model (DEM) has been adopted in this study in order to produce a set of thematic maps. The diversity of the terrain characteristics had a major role in the diversity of recipes and types of soils that are based on the geological structure, also helped to diversity in land cover and use in the region. The geological situation has affected on the general landscape of the study area. The problem of research lies in the possibility of the estimating the techniques of remote sensing and geographic information systems in the evaluation of the natural data for the study area spatially as well as determine the appropriate in grades for the appearance of the ground and in line with the reality of the region. Software for remote sensing and geographic information systems were adopted in the analysis, classification and interpretation of the prepared thematic maps in order to get to the building of the Geo-environmental assessment map of the study area. Low risk geo-environmental land mostly covered area of Quaternary deposits especially with area of slope wash deposits carried by streams. Medium and high risk geo-environmental land distributed with area of other formation with the study area, mostly the high risk shows area of folds and faults. The study has assessed the suitability of lands for agricultural purpose and settlements in less vulnerable areas within this region.

Mobility through Location-based Services at University

Directory of Open Access Journals (Sweden)

S. Martín

2008-07-01

Full Text Available Location tracking systems are becoming morerelevant in many new environments, due to the fact they thecore of context aware applications. This new concept canimprove the way universities provide services and a widenumber of companies do business. Inside university area,users location (both students, teachers and staff gives rise toa new kind of services based on their profile and on the areain which the user is in each moment, allowing apersonalization of the offered contents. The present papershows how location-based applications can be developed formobile devices through a middleware that allows differentlocation methods, such as Wi-Fi and RFID. Finally somelocation-based applications are given showing possibleexamples in different environments.

Towards Precise Metadata-set for Discovering 3D Geospatial Models in Geo-portals

Science.gov (United States)

Zamyadi, A.; Pouliot, J.; Bédard, Y.

2013-09-01

Accessing 3D geospatial models, eventually at no cost and for unrestricted use, is certainly an important issue as they become popular among participatory communities, consultants, and officials. Various geo-portals, mainly established for 2D resources, have tried to provide access to existing 3D resources such as digital elevation model, LIDAR or classic topographic data. Describing the content of data, metadata is a key component of data discovery in geo-portals. An inventory of seven online geo-portals and commercial catalogues shows that the metadata referring to 3D information is very different from one geo-portal to another as well as for similar 3D resources in the same geo-portal. The inventory considered 971 data resources affiliated with elevation. 51% of them were from three geo-portals running at Canadian federal and municipal levels whose metadata resources did not consider 3D model by any definition. Regarding the remaining 49% which refer to 3D models, different definition of terms and metadata were found, resulting in confusion and misinterpretation. The overall assessment of these geo-portals clearly shows that the provided metadata do not integrate specific and common information about 3D geospatial models. Accordingly, the main objective of this research is to improve 3D geospatial model discovery in geo-portals by adding a specific metadata-set. Based on the knowledge and current practices on 3D modeling, and 3D data acquisition and management, a set of metadata is proposed to increase its suitability for 3D geospatial models. This metadata-set enables the definition of genuine classes, fields, and code-lists for a 3D metadata profile. The main structure of the proposal contains 21 metadata classes. These classes are classified in three packages as General and Complementary on contextual and structural information, and Availability on the transition from storage to delivery format. The proposed metadata set is compared with Canadian Geospatial

Geostationary Coastal and Air Pollution Events (GEO-CAPE) Sensitivity Analysis Experiment

Science.gov (United States)

Lee, Meemong; Bowman, Kevin

2014-01-01

Geostationary Coastal and Air pollution Events (GEO-CAPE) is a NASA decadal survey mission to be designed to provide surface reflectance at high spectral, spatial, and temporal resolutions from a geostationary orbit necessary for studying regional-scale air quality issues and their impact on global atmospheric composition processes. GEO-CAPE's Atmospheric Science Questions explore the influence of both gases and particles on air quality, atmospheric composition, and climate. The objective of the GEO-CAPE Observing System Simulation Experiment (OSSE) is to analyze the sensitivity of ozone to the global and regional NOx emissions and improve the science impact of GEO-CAPE with respect to the global air quality. The GEO-CAPE OSSE team at Jet propulsion Laboratory has developed a comprehensive OSSE framework that can perform adjoint-sensitivity analysis for a wide range of observation scenarios and measurement qualities. This report discusses the OSSE framework and presents the sensitivity analysis results obtained from the GEO-CAPE OSSE framework for seven observation scenarios and three instrument systems.

Groundwater drilling location determination in Girirejo Village, Tempuran Sub-District, Magelang

International Nuclear Information System (INIS)

FD Indrastomo; I Gde Sukadana

2010-01-01

Girirejo Village is one of the villages in Tempuran Sub-district, Magelang Regency which have fresh water difficulty. Determination of groundwater drilling location conducted with phases of activity include desk study stage, topographic data collection, geology and hydrogeology mapping, geo electrical surveys, and integrated analysis. Based on the results of field geological mapping, it is found that the area is composed of three rock units, namely andesite, breccia tuff and sandy tuff. Results of rock resistivity measurements show the value of resistivity 16 - 32 ohm-m are interpreted as sandy tuff with wet conditions, and the value of resistivity 60 - 80 ohm-m is interpreted as a breccia. Location TMG-14 at depths of 1.6 - 29.1 m by 27.5 m thick aquifer is a potential point which next recommended as potential sites of groundwater drilling. (author)

Near Real-Time Dissemination of Geo-Referenced Imagery by an Enterprise Server

National Research Council Canada - National Science Library

Brown, Alison; Gilbert, Chris; Holland, Heather; Lu, Yan

2006-01-01

.... The payload is connected through a data link to a ground-based server that can process the georegistered data in near-real-time using our GeoReferenced Information Manager (GRIM) Enterprise Server...

Real-time geo-referenced video mosaicking with the MATISSE system

DEFF Research Database (Denmark)

Vincent, Anne-Gaelle; Pessel, Nathalie; Borgetto, Manon

This paper presents the MATISSE system: Mosaicking Advanced Technologies Integrated in a Single Software Environment. This system aims at producing in-line and off-line geo-referenced video mosaics of seabed given a video input and navigation data. It is based upon several techniques of image...

University of Twente at GeoCLEF 2006: geofiltered document retrieval

NARCIS (Netherlands)

Hauff, C.; Trieschnigg, Rudolf Berend; Rode, H.

2006-01-01

In this report we describe the approach of the University of Twente to the 2006 Geo-CLEF task. It is based on retrieval by content and the subsequent filtering by geographical relevance utilizing a gazetteer. The results do not show an improvement inretrieval performance when taking geographical

File Specification for GEOS-5 FP (Forward Processing)

Science.gov (United States)

Lucchesi, R.

2013-01-01

The GEOS-5 FP Atmospheric Data Assimilation System (GEOS-5 ADAS) uses an analysis developed jointly with NOAA's National Centers for Environmental Prediction (NCEP), which allows the Global Modeling and Assimilation Office (GMAO) to take advantage of the developments at NCEP and the Joint Center for Satellite Data Assimilation (JCSDA). The GEOS-5 AGCM uses the finite-volume dynamics (Lin, 2004) integrated with various physics packages (e.g, Bacmeister et al., 2006), under the Earth System Modeling Framework (ESMF) including the Catchment Land Surface Model (CLSM) (e.g., Koster et al., 2000). The GSI analysis is a three-dimensional variational (3DVar) analysis applied in grid-point space to facilitate the implementation of anisotropic, inhomogeneous covariances (e.g., Wu et al., 2002; Derber et al., 2003). The GSI implementation for GEOS-5 FP incorporates a set of recursive filters that produce approximately Gaussian smoothing kernels and isotropic correlation functions. The GEOS-5 ADAS is documented in Rienecker et al. (2008). More recent updates to the model are presented in Molod et al. (2011). The GEOS-5 system actively assimilates roughly 2 × 10(exp 6) observations for each analysis, including about 7.5 × 10(exp 5) AIRS radiance data. The input stream is roughly twice this volume, but because of the large volume, the data are thinned commensurate with the analysis grid to reduce the computational burden. Data are also rejected from the analysis through quality control procedures designed to detect, for example, the presence of cloud. To minimize the spurious periodic perturbations of the analysis, GEOS-5 FP uses the Incremental Analysis Update (IAU) technique developed by Bloom et al. (1996). More details of this procedure are given in Appendix A. The assimilation is performed at a horizontal resolution of 0.3125-degree longitude by 0.25- degree latitude and at 72 levels, extending to 0.01 hPa. All products are generated at the native resolution of the

Advanced location-based technologies and services

CERN Document Server

Karimi, Hassan A

2013-01-01

Due to the rapid increase in the number of mobile device users worldwide, location-based services (LBSs) have become pervasive, and the demand for them will continue to grow. Exploring recent changes in the technology and its uses, Advanced Location-Based Technologies and Services takes an in-depth look at new and existing technologies, techniques, applications, and opportunities. Under the editorial guidance of Hassan Karimi, with contributions from experts in the field, the book examines the breadth and depth of advanced LBS technologies and techniques. The book provides up-to-date informati

Cloud-Based Architectures for Auto-Scalable Web Geoportals towards the Cloudification of the GeoVITe Swiss Academic Geoportal

Directory of Open Access Journals (Sweden)

Ionuț Iosifescu-Enescu

2017-06-01

Full Text Available Cloud computing has redefined the way in which Spatial Data Infrastructures (SDI and Web geoportals are designed, managed, and maintained. The cloudification of a geoportal represents the migration of a full-stack geoportal application to an internet-based private or public cloud. This work introduces two generic and open cloud-based architectures for auto-scalable Web geoportals, illustrated with the use case of the cloudification efforts of the Swiss academic geoportal GeoVITe. The presented cloud-based architectural designs for auto-scalable Web geoportals consider the most important functional and non-functional requirements and are adapted to both public and private clouds. The availability of such generic cloud-based architectures advances the cloudification of academic SDIs and geoportals.

Application of geo-information science methods in ecotourism exploitation

Science.gov (United States)

Dong, Suocheng; Hou, Xiaoli

2004-11-01

Application of geo-information science methods in ecotourism development was discussed in the article. Since 1990s, geo-information science methods, which take the 3S (Geographic Information System, Global Positioning System, and Remote Sensing) as core techniques, has played an important role in resources reconnaissance, data management, environment monitoring, and regional planning. Geo-information science methods can easily analyze and convert geographic spatial data. The application of 3S methods is helpful to sustainable development in tourism. Various assignments are involved in the development of ecotourism, such as reconnaissance of ecotourism resources, drawing of tourism maps, dealing with mass data, and also tourism information inquire, employee management, quality management of products. The utilization of geo-information methods in ecotourism can make the development more efficient by promoting the sustainable development of tourism and the protection of eco-environment.

Automated vocabulary discovery for geo-parsing online epidemic intelligence

Directory of Open Access Journals (Sweden)

Freifeld Clark C

2009-11-01

Full Text Available Abstract Background Automated surveillance of the Internet provides a timely and sensitive method for alerting on global emerging infectious disease threats. HealthMap is part of a new generation of online systems designed to monitor and visualize, on a real-time basis, disease outbreak alerts as reported by online news media and public health sources. HealthMap is of specific interest for national and international public health organizations and international travelers. A particular task that makes such a surveillance useful is the automated discovery of the geographic references contained in the retrieved outbreak alerts. This task is sometimes referred to as "geo-parsing". A typical approach to geo-parsing would demand an expensive training corpus of alerts manually tagged by a human. Results Given that human readers perform this kind of task by using both their lexical and contextual knowledge, we developed an approach which relies on a relatively small expert-built gazetteer, thus limiting the need of human input, but focuses on learning the context in which geographic references appear. We show in a set of experiments, that this approach exhibits a substantial capacity to discover geographic locations outside of its initial lexicon. Conclusion The results of this analysis provide a framework for future automated global surveillance efforts that reduce manual input and improve timeliness of reporting.

Microstructural controls on the macroscopic behavior of geo-architected rock samples

Science.gov (United States)

Mitchell, C. A.; Pyrak-Nolte, L. J.

2017-12-01

Reservoir caprocks, are known to span a range of mechanical behavior from elastic granitic units to visco-elastic shale units. Whether a rock will behave elastically, visco-elastically or plastically depends on both the compositional and textural or microsctructural components of the rock, and how these components are spatially distributed. In this study, geo-architected caprock fabrication was performed to develop synthetic rock to study the role of rock rheology on fracture deformations, fluid flow and geochemical alterations. Samples were geo-architected with Portland Type II cement, Ottawa sand, and different clays (kaolinite, illite, and Montmorillonite). The relative percentages of these mineral components are manipulated to generate different rock types. With set protocols, the mineralogical content, texture, and certain structural aspects of the rock were controlled. These protocols ensure that identical samples with the same morphological and mechanical characteristics are constructed, thus overcoming issues that may arise in the presence of heterogeneity and high anisotropy from natural rock samples. Several types of homogeneous geo-architected rock samples were created, and in some cases the methods were varied to manipulate the physical parameters of the rocks. Characterization of rocks that the samples exhibit good repeatability. Rocks with the same mineralogical content generally yielded similar compressional and shear wave velocities, UCS and densities. Geo-architected rocks with 10% clay in the matrix had lower moisture content and effective porosities than rocks with no clay. The process by which clay is added to the matrix can strongly affect the resulting compressive strength and physical properties of the geo-architected sample. Acknowledgment: This material is based upon work supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, Geosciences Research Program under Award Number (DE-FG02-09ER16022).

Applying geo-spatial analysis in community needs assessment: Implications for planning and prioritizing based on data.

Science.gov (United States)

Baig, Kamran; Shaw-Ridley, Mary; Munoz, Oscar J

2016-10-01

Colonias are sub standardized and unincorporated areas located along the US-Mexico border, with severely lacking infrastructure. Residents have poor health and limited availability, accessibility and/or utilization of healthcare services in the region. Using 2006-2007 community needs assessment (CNA) surveys collected by the Center for Housing and Urban Development of Texas A&M University, 410 randomly selected surveys from Hidalgo County, Texas were analyzed. Descriptive and spatial analyses were performed and Odds ratio (OR) was calculated. Out of 410 surveys, 333 were geo-coded to identify areas most in need of dental and vision care. Two hospitals existed within 5 miles radius of the mean centers for the two areas. Distance to health care facility was not statistically predictive of the need of dental care OR=0.96 (95% CI=0.855-1.078, p value=0.492) and vision care OR=1.083 (95% CI=0.968-1.212, p value=0.164). Integrating spatial analysis and CNA enhances planning to improve service accessibility and utilization in underserved areas. Copyright © 2016 Elsevier Ltd. All rights reserved.

Geoscientific (GEO) database of the Andra Meuse / Haute-Marne research center

International Nuclear Information System (INIS)

Tabani, P.; Hemet, P.; Hermand, G.; Delay, J.; Auriere, C.

2010-01-01

Document available in extended abstract form only. The GEO database (geo-scientific database of the Meuse/Haute-Marne Center) is a tool developed by Andra, with a view to group in a secured computer form all data related to the acquisition of in situ and laboratory measurements made on solid and fluid samples. This database has three main functions: - Acquisition and management of data and computer files related to geological, geomechanical, hydrogeological and geochemical measurements on solid and fluid samples and in situ measurements (logging, on sample measurements, geological logs, etc). - Available consultation by the staff on Andra's intranet network for selective viewing of data linked to a borehole and/or a sample and for making computations and graphs on sets of laboratory measurements related to a sample. - Physical management of fluid and solid samples stored in a 'core library' in order to localize a sample, follow-up its movement out of the 'core library' to an organization, and carry out regular inventories. The GEO database is a relational Oracle data base. It is installed on a data server which stores information and manages the users' transactions. The users can consult, download and exploit data from any computer connected to the Andra network or Internet. Management of the access rights is made through a login/ password. Four geo-scientific explanations are linked to the Geo database, they are: - The Geosciences portal: The Geosciences portal is a web Intranet application accessible from the ANDRA network. It does not require a particular installation from the client and is accessible through the Internet navigator. A SQL Server Express database manages the users and access rights to the application. This application is used for the acquisition of hydrogeological and geochemical data collected on the field and on fluid samples, as well as data related to scientific work carried out at surface level or in drifts

Strategies GeoCape Intelligent Observation Studies @ GSFC

Science.gov (United States)

Cappelaere, Pat; Frye, Stu; Moe, Karen; Mandl, Dan; LeMoigne, Jacqueline; Flatley, Tom; Geist, Alessandro

2015-01-01

This presentation provides information a summary of the tradeoff studies conducted for GeoCape by the GSFC team in terms of how to optimize GeoCape observation efficiency. Tradeoffs include total ground scheduling with simple priorities, ground scheduling with cloud forecast, ground scheduling with sub-area forecast, onboard scheduling with onboard cloud detection and smart onboard scheduling and onboard image processing. The tradeoffs considered optimzing cost, downlink bandwidth and total number of images acquired.

Radiation resistance of GeO2-doped silica core optical fibers

International Nuclear Information System (INIS)

Shibata, Shuichi; Nakahara, Motohiro; Omori, Yasuharu

1985-01-01

Effects of hlogen addition to silica glass on the loss in optical fibers are examined by using halogen-free, chlorine-containing and fluorine-containing GeO 2 -doped silica core optical fibers. Measurements are made for dependence of induced loss in these optical fibers on various factors such as wavelength and total dose of gamma radiation as well as GeO 2 content. Ultraviolet absorption spectra are also observed. In addition, effects of halogens added to pure silica fibers are considered on the basis of Raman spectra of three different optical fibers (pure, F-doped, and F- and GeO 2 -codoped silica core). Thus, it is concluded that (1) addition of halogens (F and Cl) serves to decrease GeO defects and Ge(3) defects in GeO 2 -doped silica optical fibers ; (2) addition of halogens suppresses the increase in loss in GeO 2 -doped silica optical fibers induced by gamma radiation ; and (3) there are close relations between the increase in loss induced by gamma radiation and defects originally existing in the fibers. Effects of halogens added to GeO 2 -doped and pure silica optical fibers can be explained on the basis of the latter relations. (Nogami, K.)

GeoFramework: A Modeling Framework for Solid Earth Geophysics

Science.gov (United States)

Gurnis, M.; Aivazis, M.; Tromp, J.; Tan, E.; Thoutireddy, P.; Liu, Q.; Choi, E.; Dicaprio, C.; Chen, M.; Simons, M.; Quenette, S.; Appelbe, B.; Aagaard, B.; Williams, C.; Lavier, L.; Moresi, L.; Law, H.

2003-12-01

As data sets in geophysics become larger and of greater relevance to other earth science disciplines, and as earth science becomes more interdisciplinary in general, modeling tools are being driven in new directions. There is now a greater need to link modeling codes to one another, link modeling codes to multiple datasets, and to make modeling software available to non modeling specialists. Coupled with rapid progress in computer hardware (including the computational speed afforded by massively parallel computers), progress in numerical algorithms, and the introduction of software frameworks, these lofty goals of merging software in geophysics are now possible. The GeoFramework project, a collaboration between computer scientists and geoscientists, is a response to these needs and opportunities. GeoFramework is based on and extends Pyre, a Python-based modeling framework, recently developed to link solid (Lagrangian) and fluid (Eulerian) models, as well as mesh generators, visualization packages, and databases, with one another for engineering applications. The utility and generality of Pyre as a general purpose framework in science is now being recognized. Besides its use in engineering and geophysics, it is also being used in particle physics and astronomy. Geology and geophysics impose their own unique requirements on software frameworks which are not generally available in existing frameworks and so there is a need for research in this area. One of the special requirements is the way Lagrangian and Eulerian codes will need to be linked in time and space within a plate tectonics context. GeoFramework has grown beyond its initial goal of linking a limited number of exiting codes together. The following codes are now being reengineered within the context of Pyre: Tecton, 3-D FE Visco-elastic code for lithospheric relaxation; CitComS, a code for spherical mantle convection; SpecFEM3D, a SEM code for global and regional seismic waves; eqsim, a FE code for dynamic

Influence of inert fillers on shrinkage cracking of meta-kaolin geo-polymers

International Nuclear Information System (INIS)

Kuenzel, C.; Boccaccini, A.R.

2012-01-01

Geo-polymers contain a network of tetrahedral coordinated aluminate and silicate, and are potential materials to immobilize/encapsulate nuclear wastes. They can exhibit shrinkage cracking when water is removed by drying, and in order to use geo-polymers for waste encapsulation this effect needs to be investigated and controlled. In this study, six different fillers were mixed with meta-kaolin and sodium silicate solution at high pH to form geo-polymers, and the influence of filler addition on mechanical properties has been determined. The fillers used were Fe 2 O 3 , Al 2 O 3 , CaCO 3 , sand, glass and rubber and these do not react during geo-polymerisation reactions. Geo-polymers were prepared containing 30 weight percent of filler. The mechanical properties of the geo-polymers were influenced by the type of filler, with low density fillers increasing mortar viscosity. Geo-polymer samples containing fine filler particles exhibited shrinkage cracking on drying. This was not observed when coarser particles were added and these samples also had significantly improved mechanical properties. (authors)

Canada's Deep Geological Repository for Used Nuclear Fuel - Geo-scientific Site Evaluation Process - 13117

International Nuclear Information System (INIS)

Blyth, Alec; Ben Belfadhel, Mahrez; Hirschorn, Sarah; Hamilton, Duncan; McKelvie, Jennifer

2013-01-01

The Nuclear Waste Management Organization (NWMO) is responsible for implementing Adaptive Phased Management (APM), the approach selected by the Government of Canada for long-term management of used nuclear fuel generated by Canadian nuclear reactors. The ultimate objective of APM is the centralized containment and isolation of Canada's used nuclear fuel in a Deep Geological Repository in a suitable rock formation at a depth of approximately 500 meters (m) (1,640 feet [ft]). In May 2010, the NWMO published a nine-step site selection process that serves as the road map to decision-making on the location for the deep geological repository. The safety and appropriateness of any potential site will be assessed against a number of factors, both technical and social in nature. The selected site will be one that can be demonstrated to be able to safely contain and isolate used nuclear fuel, protecting humans and the environment over the very long term. The geo-scientific suitability of potential candidate sites will be assessed in a stepwise manner following a progressive and thorough site evaluation process that addresses a series of geo-scientific factors revolving around five safety functions. The geo-scientific site evaluation process includes: Initial Screenings; Preliminary Assessments; and Detailed Site Evaluations. As of November 2012, 22 communities have entered the site selection process (three in northern Saskatchewan and 18 in northwestern and southwestern Ontario). (authors)

Oxygen transport and GeO2 stability during thermal oxidation of Ge

Science.gov (United States)

da Silva, S. R. M.; Rolim, G. K.; Soares, G. V.; Baumvol, I. J. R.; Krug, C.; Miotti, L.; Freire, F. L.; da Costa, M. E. H. M.; Radtke, C.

2012-05-01

Oxygen transport during thermal oxidation of Ge and desorption of the formed Ge oxide are investigated. Higher oxidation temperatures and lower oxygen pressures promote GeO desorption. An appreciable fraction of oxidized Ge desorbs during the growth of a GeO2 layer. The interplay between oxygen desorption and incorporation results in the exchange of O originally present in GeO2 by O from the gas phase throughout the oxide layer. This process is mediated by O vacancies generated at the GeO2/Ge interface. The formation of a substoichiometric oxide is shown to have direct relation with the GeO desorption.

Specialized Finite Set Statistics (FISST)-Based Estimation Methods to Enhance Space Situational Awareness in Medium Earth Orbit (MEO) and Geostationary Earth Orbit (GEO)

Science.gov (United States)

2016-08-17

Specialized Finite Set Statistics (FISST)-based Estimation Methods to Enhance Space Situational Awareness in Medium Earth Orbit (MEO) and Geostationary...terms of specialized Geostationary Earth Orbit (GEO) elements to estimate the state of resident space objects in the geostationary regime. Justification...AFRL-RV-PS- AFRL-RV-PS- TR-2016-0114 TR-2016-0114 SPECIALIZED FINITE SET STATISTICS (FISST)- BASED ESTIMATION METHODS TO ENHANCE SPACE SITUATIONAL

Effective caching of shortest paths for location-based services

DEFF Research Database (Denmark)

Jensen, Christian S.; Thomsen, Jeppe Rishede; Yiu, Man Lung

2012-01-01

Web search is ubiquitous in our daily lives. Caching has been extensively used to reduce the computation time of the search engine and reduce the network traffic beyond a proxy server. Another form of web search, known as online shortest path search, is popular due to advances in geo...

Analysis of CO in the tropical troposphere using Aura satellite data and the GEOS-Chem model: insights into transport characteristics of the GEOS meteorological products

Directory of Open Access Journals (Sweden)

Junhua Liu

2010-12-01

Full Text Available We use the GEOS-Chem chemistry-transport model (CTM to interpret the spatial and temporal variations of tropical tropospheric CO observed by the Microwave Limb Sounder (MLS and the Tropospheric Emission Spectrometer (TES. In so doing, we diagnose and evaluate transport in the GEOS-4 and GEOS-5 assimilated meteorological fields that drive the model, with a particular focus on vertical mixing at the end of the dry season when convection moves over the source regions. The results indicate that over South America, deep convection in both GEOS-4 and GEOS-5 decays at too low an altitude early in the wet season, and the source of CO from isoprene in the model (MEGAN v2.1 is too large, causing a lag in the model's seasonal maximum of CO compared to MLS CO in the upper troposphere (UT. TES and MLS data reveal problems with excessive transport of CO to the eastern equatorial Pacific and lofting in the ITCZ in August and September, particularly in GEOS-4. Over southern Africa, GEOS-4 and GEOS-5 simulations match the phase of the observed CO variation from the lower troposphere (LT to the UT fairly well, although the magnitude of the seasonal maximum is underestimated considerably due to low emissions in the model. A sensitivity run with increased emissions leads to improved agreement with observed CO in the LT and middle troposphere (MT, but the amplitude of the seasonal variation is too high in the UT in GEOS-4. Difficulty in matching CO in the LT and UT implies there may be overly vigorous vertical mixing in GEOS-4 early in the wet season. Both simulations and observations show a time lag between the peak in fire emissions (July and August and in CO (September and October. We argue that it is caused by the prevailing subsidence in the LT until convection moves south in September, as well as the low sensitivity of TES data in the LT over the African Plateau. The MLS data suggest that too much CO has been transported from fires in northern Africa to the UT

Geo-Enabled, Mobile Services

DEFF Research Database (Denmark)

Jensen, Christian Søndergaard

2006-01-01

We are witnessing the emergence of a global infrastructure that enables the widespread deployment of geo-enabled, mobile services in practice. At the same time, the research community has also paid increasing attention to data management aspects of mobile services. This paper offers me...

Concept of a spatial data infrastructure for web-mapping, processing and service provision for geo-hazards

Science.gov (United States)

Weinke, Elisabeth; Hölbling, Daniel; Albrecht, Florian; Friedl, Barbara

2017-04-01

Geo-hazards and their effects are distributed geographically over wide regions. The effective mapping and monitoring is essential for hazard assessment and mitigation. It is often best achieved using satellite imagery and new object-based image analysis approaches to identify and delineate geo-hazard objects (landslides, floods, forest fires, storm damages, etc.). At the moment, several local/national databases and platforms provide and publish data of different types of geo-hazards as well as web-based risk maps and decision support systems. Also, the European commission implemented the Copernicus Emergency Management Service (EMS) in 2015 that publishes information about natural and man-made disasters and risks. Currently, no platform for landslides or geo-hazards as such exists that enables the integration of the user in the mapping and monitoring process. In this study we introduce the concept of a spatial data infrastructure for object delineation, web-processing and service provision of landslide information with the focus on user interaction in all processes. A first prototype for the processing and mapping of landslides in Austria and Italy has been developed within the project Land@Slide, funded by the Austrian Research Promotion Agency FFG in the Austrian Space Applications Program ASAP. The spatial data infrastructure and its services for the mapping, processing and analysis of landslides can be extended to other regions and to all types of geo-hazards for analysis and delineation based on Earth Observation (EO) data. The architecture of the first prototypical spatial data infrastructure includes four main areas of technical components. The data tier consists of a file storage system and the spatial data catalogue for the management of EO-data, other geospatial data on geo-hazards, as well as descriptions and protocols for the data processing and analysis. An interface to extend the data integration from external sources (e.g. Sentinel-2 data) is planned

Analysis of free geo-server software usability from the viewpoint of INSPIRE requirementsAnalysis of free geo-server software usability from the viewpoint of INSPIRE requirements

Directory of Open Access Journals (Sweden)

Tomasz  Grasza

2014-06-01

Full Text Available The paper presents selected server platforms based on free and open source license, coherent with the standards of the Open Geospatial Consortium. The presented programs are evaluated in the context of the INSPIRE Directive. The first part describes the requirements of the Directive, and afterwards presented are the pros and cons of each platform, to meet these demands. This article provides an answer to the question whether the use of free software can provide interoperable network services in accordance with the requirements of the INSPIRE Directive, on the occasion of presenting the application examples and practical tips on the use of particular programs.[b]Keywords[/b]: GIS, INSPIRE, free software, OGC, geoportal, network services, GeoServer, deegree, GeoNetwork

GeoMapApp Learning Activities: Enabling the democratisation of geoscience learning

Science.gov (United States)

Goodwillie, A. M.; Kluge, S.

2011-12-01

GeoMapApp Learning Activities (http://serc.carleton.edu/geomapapp) are step-by-step guided inquiry geoscience education activities that enable students to dictate the pace of learning. They can be used in the classroom or out of class, and their guided nature means that the requirement for teacher intervention is minimised which allows students to spend increased time analysing and understanding a broad range of geoscience data, content and concepts. Based upon GeoMapApp (http://www.geomapapp.org), a free, easy-to-use map-based data exploration and visualisation tool, each activity furnishes the educator with an efficient package of downloadable documents. This includes step-by-step student instructions and answer sheet; a teacher's edition annotated worksheet containing teaching tips, additional content and suggestions for further work; quizzes for use before and after the activity to assess learning; and a multimedia tutorial. The activities can be used by anyone at any time in any place with an internet connection. In essence, GeoMapApp Learning Activities provide students with cutting-edge technology, research-quality geoscience data sets, and inquiry-based learning in a virtual lab-like environment. Examples of activities so far created are student calculation and analysis of the rate of seafloor spreading, and present-day evidence on the seafloor for huge ancient landslides around the Hawaiian islands. The activities are designed primarily for students at the community college, high school and introductory undergraduate levels, exposing students to content and concepts typically found in those settings.

Geo-scientific database for research and development purposes

International Nuclear Information System (INIS)

Tabani, P.; Mangeot, A.; Crabol, V.; Delage, P.; Dewonck, S.; Auriere, C.

2012-01-01

Document available in extended abstract form only. The Research and Development Division must manage, secure and reliable manner, a large number of data from scientific disciplines and diverse means of acquisition (observations, measurements, experiments, etc.). This management is particularly important for the Underground research Laboratory, the source of many recording continuous measurements. Thus, from its conception, Andra has implemented two management tools of scientific information, the 'Acquisition System and Data Management' [SAGD] and GEO database with its associated applications. Beyond its own needs, Andra wants to share its achievements with the scientific community, and it therefore provides the data stored in its databases or samples of rock or water when they are available. Acquisition and Data Management (SAGD) This system manages data from sensors installed at several sites. Some sites are on the surface (piezometric, atmospheric and environmental stations), the other are in the Underground Research Laboratory. This system also incorporates data from experiments in which Andra participates in Mont Terri Laboratory in Switzerland. S.A.G.D fulfils these objectives by: - Make available in real time on a single system, with scientists from Andra but also different partners or providers who need it, all experimental data from measurement points - Displaying the recorded data on temporal windows and specific time step, - Allowing remote control of the experimentations, - Ensuring the traceability of all recorded information, - Ensuring data storage in a data base. S.A.G.D has been deployed in the first experimental drift at -445 m in November 2004. It was subsequently extended to the underground Mont Terri laboratory in Switzerland in 2005, to the entire surface logging network of the Meuse / Haute-Marne Center in 2008 and to the environmental network in 2011. All information is acquired, stored and manage by a software called Geoscope. This software

Publicly Available Geosynchronous (GEO) Space Object Catalog for Future Space Situational Awareness (SSA) Studies

Science.gov (United States)

Koblick, D. C.; Shankar, P.; Xu, S.

Previously, there have been many commercial proposals and extensive academic studies regarding ground and space based sensors to assist a space surveillance network in obtaining metric observations of satellites and debris near Geosynchronous Earth Orbit (GEO). Most use physics based models for geometric constraints, lighting, and tasker/scheduler operations of sensor architectures. Under similar physics modeling assumptions, the space object catalog is often different due to proprietary standards and datasets. Lack of catalog commonality between studies creates barriers and difficulty comparing performance benefits of sensor trades. To solve this problem, we have constructed a future GEO space catalog from publicly available datasets and literature. The annual number of new payloads and rocket bodies is drawn from a Poisson distribution while the growth of the current GEO catalog is bootstrapped from the historical payload, upper stage, and debris data. We adopt a spherically symmetric explosion model and couple it with the NASA standard breakup model to simulate explosions of payloads and rocket bodies as they are the primary drivers of the debris population growth. The cumulative number of fragments follow a power-law distribution. Result from 1,000 random catalog growth simulations indicates that the GEO space object population in the year 2050 will include over 3,600 objects, nearly half of which are debris greater than 10 cm spherical diameter. The number of rocket bodies and dead payloads is projected to nearly double over the next 33 years. For comparison, the current Air Force Space Command catalog snapshot contains fewer than 50 pieces of debris and coarse Radar Cross Section (RCS) estimates which include: small, medium, and large. The current catalog may be sufficient for conjunction studies, but not for analyzing future sensor system performance. The 2050 GEO projected catalog will be available online for commercial/academic research and development.

Inaccuracy of Location Information as a Consequence of Data Collection Delay and Presence of Misbehaving and Malicious Nodes

DEFF Research Database (Denmark)

Madsen, Tatiana Kozlova; Nielsen, Jimmy Jessen; Garcia, Mariano

2012-01-01

This paper presents an overview of current research investigations within the WHERE-2 Project with respect to possibilities of usage of geo-location information for protocol and system optimizations. In this work we would like to underline that incorporating the knowledge of nodes’ location in pr...

Assessing Air-Sea Interaction in the Evolving NASA GEOS Model

Science.gov (United States)

Clayson, Carol Anne; Roberts, J. Brent

2015-01-01

In order to understand how the climate responds to variations in forcing, one necessary component is to understand the full distribution of variability of exchanges of heat and moisture between the atmosphere and ocean. Surface heat and moisture fluxes are critical to the generation and decay of many coupled air-sea phenomena. These mechanisms operate across a number of scales and contain contributions from interactions between the anomalous (i.e. non-mean), often extreme-valued, flux components. Satellite-derived estimates of the surface turbulent and radiative heat fluxes provide an opportunity to assess results from modeling systems. Evaluation of only time mean and variability statistics, however only provides limited traceability to processes controlling what are often regime-dependent errors. This work will present an approach to evaluate the representation of the turbulent fluxes at the air-sea interface in the current and evolving Goddard Earth Observing System (GEOS) model. A temperature and moisture vertical profile-based clustering technique is used to identify robust weather regimes, and subsequently intercompare the turbulent fluxes and near-surface parameters within these regimes in both satellite estimates and GEOS-driven data sets. Both model reanalysis (MERRA) and seasonal-to-interannual coupled GEOS model simulations will be evaluated. Particular emphasis is placed on understanding the distribution of the fluxes including extremes, and the representation of near-surface forcing variables directly related to their estimation. Results from these analyses will help identify the existence and source of regime-dependent biases in the GEOS model ocean surface turbulent fluxes. The use of the temperature and moisture profiles for weather-state clustering will be highlighted for its potential broad application to 3-D output typical of model simulations.

geo-scientific indicators for safety

International Nuclear Information System (INIS)

Andersson, J.; Bruno, G.; Deguchi, A.; Fein, E.; Larue, P.J.; Lei, S.; Leung, H.; Norris, S.; Violette, S.; Wollrath, J.

2007-01-01

Working Group A was continuation of Working Group B of AMIGO-1, but participants explored more deeply the issues surrounding geo-scientific indicators for safety. The following outcomes were expected. - List different geo-scientific arguments or indicators for safety (with motivation) for various host rocks and sites. Consider dividing the arguments into those that support isolation or retention and discuss their applicability for different time frames. - What actual measurable field evidence supports these arguments/indicators? - What kind of field evidence would go counter to these safety arguments? - What key messages are the most promising in terms of scientific credibility to contribute to the safety case? Possibly examine the same message but in terms of potential ease of communication. The session started with two introductory presentations: - Following the presentations, in discussion the Working Group listed: - Safety Functions where geo-scientific support is needed; - Commonly used chains of argument for supporting these safety functions; - Whether the applicability of the arguments are host rock or site specific and how they apply for different time frames; - Field evidence or other issues that would go counter to the safety arguments; - Key messages most promising in terms of scientific credibility to contribute to the safety case. Overall it was concluded by the Working Group that: - The most important argument is to present a clear understanding of past geological evolution at the particular site, consistent with the global understanding of geological evolution. Efforts should be made to achieve a broad consensus on this from many independent experts. - The supporting arguments are seldom based on a single piece of evidence. It is the chain of arguments rather than individual arguments that is important. - We are primarily interested in 'reasonable' predictability of the geological system. We recognize that most geological systems evolve with time

EnerGEO biomass pilot

International Nuclear Information System (INIS)

Tum, M.; Guenther, K.P.; McCallum, I.; Balkovic, J.; Khabarov, N.; Kindermann, G.; Leduc, S.; Biberacher, M.

2013-01-01

In the framework of the EU FP7 project EnerGEO (Earth Observations for Monitoring and Assessment of the Environmental Impact of Energy Use) sustainable energy potentials for forest and agricultural areas were estimated by applying three different model approaches. Firstly, the Biosphere Energy Transfer Hydrology (BETHY/DLR) model was applied to assess agricultural and forest biomass increases on a regional scale with the extension to grassland. Secondly, the EPIC (Environmental Policy Integrated Climate) - a cropping systems simulation model - was used to estimate grain yields on a global scale and thirdly the Global Forest Model (G4M) was used to estimate global woody biomass harvests and stock. The general objective of the biomass pilot is to implement the observational capacity for using biomass as an important current and future energy resource. The scope of this work was to generate biomass energy potentials for locations on the globe and to validate these data. Therefore, the biomass pilot was focused to use historical and actual remote sensing data as input data for the models. For validation purposes, forest biomass maps for 1987 and 2002 for Germany (Bundeswaldinventur (BWI-2)) and 2001 and 2008 for Austria (Austrian Forest Inventory (AFI)) were prepared as reference. (orig.)

EnerGEO biomass pilot

Energy Technology Data Exchange (ETDEWEB)

Tum, M.; Guenther, K.P. [German Aerospace Center (DLR), Wessling (Germany). German Remote Sensing Data Center (DFD); McCallum, I.; Balkovic, J.; Khabarov, N.; Kindermann, G.; Leduc, S. [International Institute for Applied Systems Analysis (IIASA), Laxenburg (Austria); Biberacher, M. [Research Studios Austria AG (RSA), Salzburg (Austria)

2013-07-01

In the framework of the EU FP7 project EnerGEO (Earth Observations for Monitoring and Assessment of the Environmental Impact of Energy Use) sustainable energy potentials for forest and agricultural areas were estimated by applying three different model approaches. Firstly, the Biosphere Energy Transfer Hydrology (BETHY/DLR) model was applied to assess agricultural and forest biomass increases on a regional scale with the extension to grassland. Secondly, the EPIC (Environmental Policy Integrated Climate) - a cropping systems simulation model - was used to estimate grain yields on a global scale and thirdly the Global Forest Model (G4M) was used to estimate global woody biomass harvests and stock. The general objective of the biomass pilot is to implement the observational capacity for using biomass as an important current and future energy resource. The scope of this work was to generate biomass energy potentials for locations on the globe and to validate these data. Therefore, the biomass pilot was focused to use historical and actual remote sensing data as input data for the models. For validation purposes, forest biomass maps for 1987 and 2002 for Germany (Bundeswaldinventur (BWI-2)) and 2001 and 2008 for Austria (Austrian Forest Inventory (AFI)) were prepared as reference. (orig.)

A fully distributed geo-routing scheme for wireless sensor networks

KAUST Repository

Bader, Ahmed

2013-12-01

When marrying randomized distributed space-time coding (RDSTC) to beaconless geo-routing, new performance horizons can be created. In order to reach those horizons, however, beaconless geo-routing protocols must evolve to operate in a fully distributed fashion. In this letter, we expose a technique to construct a fully distributed geo-routing scheme in conjunction with RDSTC. We then demonstrate the performance gains of this novel scheme by comparing it to one of the prominent classical schemes. © 2013 IEEE.

A fully distributed geo-routing scheme for wireless sensor networks

KAUST Repository

Bader, Ahmed; Abed-Meraim, Karim; Alouini, Mohamed-Slim

2013-01-01

When marrying randomized distributed space-time coding (RDSTC) to beaconless geo-routing, new performance horizons can be created. In order to reach those horizons, however, beaconless geo-routing protocols must evolve to operate in a fully distributed fashion. In this letter, we expose a technique to construct a fully distributed geo-routing scheme in conjunction with RDSTC. We then demonstrate the performance gains of this novel scheme by comparing it to one of the prominent classical schemes. © 2013 IEEE.

Specific Space Transportation Costs to GEO - Past, Present and Future

Science.gov (United States)

Koelle, Dietrich E.

2002-01-01

The largest share of space missions is going to the Geosynchronous Orbit (GEO); they have the highest commercial importance. The paper first shows the historic trend of specific transportation costs to GEO from 1963 to 2002. It started out with more than 500 000 /kg(2002-value) and has come down to 36 000 /kg. This reduction looks impressive, however, the reason is NOT improved technology or new techniques but solely the growth of GEO payloads`unit mass. The first GEO satellite in 1963 did have a mass of 36 kg mass (BoL) . This has grown to a weight of 1600 kg (average of all GEO satellites) in the year 2000. Mass in GEO after injection is used here instead of GTO mass since the GTO mass depends on the launch site latitude. The specific cost reduction is only due to the "law-of-scale", valid in the whole transportation business: the larger the payload, the lower the specific transportation cost. The paper shows the actual prices of launch services to GTO by the major launch vehicles. Finally the potential GEO transportation costs of future launch systems are evaluated. What is the potential reduction of specific transportation costs if reusable elements are introduced in future systems ? Examples show that cost reductions up to 75 % seem achievable - compared to actual costs - but only with launch systems optimized according to modern principles of cost engineering. 1. 53rd International Astronautical Congress, World Space Congress Houston 2. First Submission 3. Specific Space Transportation Costs to GEO - Past, Present and Future 4. KOELLE, D.E. 5. IAA.1.1 Launch Vehicles' Cost Engineering and Economic Competitiveness 6. D.E. Koelle; A.E. Goldstein 7. One overhead projector and screen 8. Word file attached 9. KOELLE I have approval to attend the Congress. I am not willing to present this paper at the IAC Public Outreach Program.

Thallium pollution in China: A geo-environmental perspective.

Science.gov (United States)

Xiao, Tangfu; Yang, Fei; Li, Shehong; Zheng, Baoshan; Ning, Zengping

2012-04-01

It is well known that thallium (Tl) is a non-essential and toxic metal to human health, but less is known about the geo-environmentally-induced Tl pollution and its associated health impacts. High concentrations of Tl that are primarily associated with the epithermal metallogenesis of sulfide minerals have the potential of producing Tl pollution in the environment, which has been recognized as an emerging pollutant in China. This paper aims to review the research progress in China on Tl pollution in terms of the source, mobility, transportation pathway, and health exposure of Tl and to address the environmental concerns on Tl pollution in a geo-environmental perspective. Tl associated with the epithermal metallogenesis of sulfide minerals has been documented to disperse readily and accumulate through the geo-environmental processes of soil enrichment, water transportation and food crop growth beyond a mineralized zone. The enrichments of Tl in local soil, water, and crops may result in Tl pollution and consequent adverse health effects, e.g. chronic Tl poisoning. Investigation of the baseline Tl in the geo-environment, proper land use and health-related environmental planning and regulation are critical to prevent the Tl pollution. Examination of the human urinary Tl concentration is a quick approach to identify exposure of Tl pollution to humans. The experiences of Tl pollution in China can provide important lessons for many other regions in the world with similar geo-environmental contexts because of the high mobility and toxicity of Tl. Copyright © 2011 Elsevier B.V. All rights reserved.

Geo synthetic-reinforced Pavement systems; Sistemas de pavimentos reforzados con geosinteticos

Energy Technology Data Exchange (ETDEWEB)

Zornberg, J. G.

2014-02-01

Geo synthetics have been used as reinforcement inclusions to improve pavement performance. while there are clear field evidence of the benefit of using geo synthetic reinforcements, the specific conditions or mechanisms that govern the reinforcement of pavements are, at best, unclear and have remained largely unmeasured. Significant research has been recently conducted with the objectives of: (i) determining the relevant properties of geo synthetics that contribute to the enhanced performance of pavement systems, (ii) developing appropriate analytical, laboratory and field methods capable of quantifying the pavement performance, and (iii) enabling the prediction of pavement performance as a function of the properties of the various types of geo synthetics. (Author)

Fault Location Based on Synchronized Measurements: A Comprehensive Survey

Science.gov (United States)

Al-Mohammed, A. H.; Abido, M. A.

2014-01-01

This paper presents a comprehensive survey on transmission and distribution fault location algorithms that utilize synchronized measurements. Algorithms based on two-end synchronized measurements and fault location algorithms on three-terminal and multiterminal lines are reviewed. Series capacitors equipped with metal oxide varistors (MOVs), when set on a transmission line, create certain problems for line fault locators and, therefore, fault location on series-compensated lines is discussed. The paper reports the work carried out on adaptive fault location algorithms aiming at achieving better fault location accuracy. Work associated with fault location on power system networks, although limited, is also summarized. Additionally, the nonstandard high-frequency-related fault location techniques based on wavelet transform are discussed. Finally, the paper highlights the area for future research. PMID:24701191

Fault Location Based on Synchronized Measurements: A Comprehensive Survey

Directory of Open Access Journals (Sweden)

A. H. Al-Mohammed

2014-01-01

Full Text Available This paper presents a comprehensive survey on transmission and distribution fault location algorithms that utilize synchronized measurements. Algorithms based on two-end synchronized measurements and fault location algorithms on three-terminal and multiterminal lines are reviewed. Series capacitors equipped with metal oxide varistors (MOVs, when set on a transmission line, create certain problems for line fault locators and, therefore, fault location on series-compensated lines is discussed. The paper reports the work carried out on adaptive fault location algorithms aiming at achieving better fault location accuracy. Work associated with fault location on power system networks, although limited, is also summarized. Additionally, the nonstandard high-frequency-related fault location techniques based on wavelet transform are discussed. Finally, the paper highlights the area for future research.

GeoMapApp Learning Activities: A Virtual Lab Environment for Student-Centred Engagement with Geoscience Data

Science.gov (United States)

Kluge, S.; Goodwillie, A. M.

2012-12-01

As STEM learning requirements enter the mainstream, there is benefit to providing the tools necessary for students to engage with research-quality geoscience data in a cutting-edge, easy-to-use map-based interface. Funded with an NSF GeoEd award, GeoMapApp Learning Activities ( http://serc.carleton.edu/geomapapp/collection.html ) are being created to help in that endeavour. GeoMapApp Learning Activities offer step-by-step instructions within a guided inquiry approach that enables students to dictate the pace of learning. Based upon GeoMapApp (http://www.geomapapp.org), a free, easy-to-use map-based data exploration and visualisation tool, each activity furnishes the educator with an efficient package of downloadable documents. This includes step-by-step student instructions and answer sheet; an educator's annotated worksheet containing teaching tips, additional content and suggestions for further work; and, quizzes for use before and after the activity to assess learning. Examples of activities so far created involve calculation and analysis of the rate of seafloor spreading; compilation of present-day evidence for huge ancient landslides on the seafloor around the Hawaiian islands; a study of radiometrically-dated volcanic rocks to help understand the concept of hotspots; and, the optimisation of contours as a means to aid visualisation of 3-D data sets on a computer screen. The activities are designed for students at the introductory undergraduate, community college and high school levels, and present a virtual lab-like environment to expose students to content and concepts typically found in those educational settings. The activities can be used in the classroom or out of class, and their guided nature means that the requirement for teacher intervention is reduced thus allowing students to spend more time analysing and understanding geoscience data, content and concepts. Each activity is freely available through the SERC-Carleton web site.

Chemical Mechanisms and Their Applications in the Goddard Earth Observing System (GEOS) Earth System Model.

Science.gov (United States)

Nielsen, J Eric; Pawson, Steven; Molod, Andrea; Auer, Benjamin; da Silva, Arlindo M; Douglass, Anne R; Duncan, Bryan; Liang, Qing; Manyin, Michael; Oman, Luke D; Putman, William; Strahan, Susan E; Wargan, Krzysztof

2017-12-01

NASA's Goddard Earth Observing System (GEOS) Earth System Model (ESM) is a modular, general circulation model (GCM), and data assimilation system (DAS) that is used to simulate and study the coupled dynamics, physics, chemistry, and biology of our planet. GEOS is developed by the Global Modeling and Assimilation Office (GMAO) at NASA Goddard Space Flight Center. It generates near-real-time analyzed data products, reanalyses, and weather and seasonal forecasts to support research targeted to understanding interactions among Earth System processes. For chemistry, our efforts are focused on ozone and its influence on the state of the atmosphere and oceans, and on trace gas data assimilation and global forecasting at mesoscale discretization. Several chemistry and aerosol modules are coupled to the GCM, which enables GEOS to address topics pertinent to NASA's Earth Science Mission. This paper describes the atmospheric chemistry components of GEOS and provides an overview of its Earth System Modeling Framework (ESMF)-based software infrastructure, which promotes a rich spectrum of feedbacks that influence circulation and climate, and impact human and ecosystem health. We detail how GEOS allows model users to select chemical mechanisms and emission scenarios at run time, establish the extent to which the aerosol and chemical components communicate, and decide whether either or both influence the radiative transfer calculations. A variety of resolutions facilitates research on spatial and temporal scales relevant to problems ranging from hourly changes in air quality to trace gas trends in a changing climate. Samples of recent GEOS chemistry applications are provided.

Proximity-Based Asynchronous Messaging Platform for Location-Based Internet of Things Service

Directory of Open Access Journals (Sweden)

Hyeong gon Jo

2016-07-01

Full Text Available The Internet of Things (IoT opens up tremendous opportunities to provide location-based applications. However, despite the services around a user being physically adjacent, common IoT platforms use a centralized structure, like a cloud-computing architecture, which transfers large amounts of data to a central server. This raises problems, such as traffic concentration, long service latency, and high communication cost. In this paper, we propose a physical distance-based asynchronous messaging platform that specializes in processing personalized data and location-based messages. The proposed system disperses traffic using a location-based message-delivery protocol, and has high stability.

Designing and implementing a Quality Broker: the GeoViQua experience

Science.gov (United States)

Papeschi, Fabrizio; Bigagli, Lorenzo; Masò, Joan; Nativi, Stefano

2014-05-01

GeoViQua (QUAlity aware VIsualisation for the Global Earth Observation System of Systems) is an FP7 project aiming at complementing the Global Earth Observation System of Systems (GEOSS) with rigorous data quality specifications and quality-aware capabilities, in order to improve reliability in scientific studies and policy decision-making. GeoViQua main scientific and technical objective is to enhance the GEOSS Common Infrastructure (GCI) providing the user community with innovative quality-aware search and visualization tools, which will be integrated in the GEOPortal, as well as made available to other end-user interfaces. To this end, GeoViQua will promote the extension of the current standard metadata for geographic information with accurate and expressive quality indicators. Employing and extending several ISO standards such as 19115, 19157 and 19139, a common set of data quality indicators has been selected to be used within the project. The resulting work, in the form of a data model, is expressed in XML Schema Language and encoded in XML. Quality information can be stated both by data producers and by data users, actually resulting in two conceptually distinct data models, the Producer Quality model and the User Quality model (or User Feedback model). GeoViQua architecture is built on the brokering approach successfully experimented within the EuroGEOSS project and realized by the GEO DAB (Discovery and Access Broker) which is part of the GCI. The GEO DAB allows for harmonization and distribution in a transparent way for both users and data providers. This way, GeoViQua can effectively complement and extend the GEO DAB obtaining a Quality augmentation Broker (DAB-Q) which plays a central role in ensuring the consistency of the Producer and User quality models. The GeoViQua architecture also includes a Feedback Catalog, a particular service brokered by the DAB-Q which is dedicated to the storage and discovery of user feedbacks. A very important issue

Location-based solutions in the Experience centre

DEFF Research Database (Denmark)

Hansen, Dan Witzner; Alapetite, Alexandre; Holdgaard, Nanna

In this paper we present a prototype system for location-based guiding. A user survey has been conducted and the observations are used to support design choices. The prototype allows for both indoor and outdoor navigation at and in the vicinity of the experience centre NaturBornholm1 in Denmark u...... using a combination of Bluetooth, GPS and QR-codes. Bluetooth and GPS are used for location-based information and QR-codes are used to convey user preferences....

Location-based solutions in the Experience centre

DEFF Research Database (Denmark)

Witzner Hansen, Dan; Alapetite, Alexandre Philippe Bernard; Holdgaard, Nanna

2008-01-01

In this paper we present a prototype system for location-based guiding. A user survey has been conducted and the observations are used to support design choices. The prototype allows for both indoor and outdoor navigation at and in the vicinity of the experience centre NaturBornholm1 in Denmark u...... using a combination of Bluetooth, GPS and QRcodes. Bluetooth and GPS are used for location-based information and QR-codes are used to convey user preferences....

Deformation offshore Northern Chile monitored by a seafloor geodetic network (GeoSEA)

Science.gov (United States)

Hannemann, Katrin; Lange, Dietrich; Kopp, Heidrun; Petersen, Florian; Contreras-Reyes, Eduardo

2017-04-01

The Nazca-South American plate boundary around 21°S has last ruptured in an earthquake in 1877 and was identified as a seismic gap prior to the 2014 Iquique earthquake (Mw=8.1). The southern portion of this segment is still unbroken. The geodetic monitoring of the Chilean subduction zone is crucial to understand the deformation processes in this area. Most geodetic measurements rely on GPS and are therefore limited to onshore campaigns. In December 2015, we installed the GeoSEA (Geodetic Earthquake Observatory on the SEAfloor) array around 21°S of the Nazca-South American plate boundary with RV SONNE to extend the geodetic observations to the offshore areas. The GeoSEA array consists of autonomous acoustic seafloor transponders mounted on 4 m high tripods. These transponders are able to continuously measure the two-way travel time of acoustic signals between station pairs (baselines) and the properties of the sea water (sound speed, temperature and pressure) at each transponder. These measurements are used to retrieve the distances between the transponders and give insights into the deformation of the seafloor. At the Chilean subduction zone, we installed in total 23 transponders in 3 subarrays with interstation distances of up to 2500 m. On the middle continental slope in 2300 m water depth, an array consisting of 8 transponders measures across crustal faults seen in AUV mapping. A second array of 5 stations located on the outer rise monitors extension across normal plate-bending faults. The deepest deployment in 5000 m water depth located on the lower continental slope with 10 stations is designed to measure diffuse strain build-up. The transponders are intended to monitor the seafloor deformation for 3.5 years. In November 2016 during a cruise of RV Langseth, the first 11 months of data were successfully uploaded via an acoustic modem. Furthermore, an additional component of the network, GeoSURF, a self-steering autonomous vehicle (wave glider), was

The live service of video geo-information

Science.gov (United States)

Xue, Wu; Zhang, Yongsheng; Yu, Ying; Zhao, Ling

2016-03-01

In disaster rescue, emergency response and other occasions, traditional aerial photogrammetry is difficult to meet real-time monitoring and dynamic tracking demands. To achieve the live service of video geo-information, a system is designed and realized—an unmanned helicopter equipped with video sensor, POS, and high-band radio. This paper briefly introduced the concept and design of the system. The workflow of video geo-information live service is listed. Related experiments and some products are shown. In the end, the conclusion and outlook is given.

The GEO Handbook on Biodiversity Observation Networks

CSIR Research Space (South Africa)

Walters, Michele

2017-01-01

Full Text Available across the planet. I congratulate GEO BON on creating this powerful mechanism and wish the GEO BON community great success in each of its future endeavours. Geneva, Switzerland Barbara J. Ryan Executive Director: Group on Earth Observations viii Foreword... of biodiversity data is the desired goal, it would be hard to achieve except via the mechanism of a network, simply because 6 R.J. Scholes et al. sampling and species identification is more cost-effective and situation-appropriate if conducted using local...

The impact of geo-tagging on the photo industry and creating revenue streams

Science.gov (United States)

Richter, Rolf; Böge, Henning; Weckmann, Christoph; Schloen, Malte

2010-02-01

Internet geo and mapping services like Google Maps, Google Earth and Microsoft Bing Maps have reinvented the use of geographical information and have reached an enormous popularity. Besides that, location technologies like GPS have become affordable and are now being integrated in many camera phones. GPS is also available for standalone cameras as add on products or integrated in cameras. These developments are the enabler for new products for the photo industry or they enhance existing products. New commercial opportunities have been identified in the areas of photo hardware, internet/software and photo finishing.

EarthCube GeoLink: Semantics and Linked Data for the Geosciences

Science.gov (United States)

Arko, R. A.; Carbotte, S. M.; Chandler, C. L.; Cheatham, M.; Fils, D.; Hitzler, P.; Janowicz, K.; Ji, P.; Jones, M. B.; Krisnadhi, A.; Lehnert, K. A.; Mickle, A.; Narock, T.; O'Brien, M.; Raymond, L. M.; Schildhauer, M.; Shepherd, A.; Wiebe, P. H.

2015-12-01

The NSF EarthCube initiative is building next-generation cyberinfrastructure to aid geoscientists in collecting, accessing, analyzing, sharing, and visualizing their data and knowledge. The EarthCube GeoLink Building Block project focuses on a specific set of software protocols and vocabularies, often characterized as the Semantic Web and "Linked Data", to publish data online in a way that is easily discoverable, accessible, and interoperable. GeoLink brings together specialists from the computer science, geoscience, and library science domains, and includes data from a network of NSF-funded repositories that support scientific studies in marine geology, marine ecosystems, biogeochemistry, and paleoclimatology. We are working collaboratively with closely-related Building Block projects including EarthCollab and CINERGI, and solicit feedback from RCN projects including Cyberinfrastructure for Paleogeosciences (C4P) and iSamples. GeoLink has developed a modular ontology that describes essential geoscience research concepts; published data from seven collections (to date) on the Web as geospatially-enabled Linked Data using this ontology; matched and mapped data between collections using shared identifiers for investigators, repositories, datasets, funding awards, platforms, research cruises, physical specimens, and gazetteer features; and aggregated the results in a shared knowledgebase that can be queried via a standard SPARQL endpoint. Client applications have been built around the knowledgebase, including a Web/map-based data browser using the Leaflet JavaScript library and a simple query service using the OpenSearch format. Future development will include extending and refining the GeoLink ontology, adding content from additional repositories, developing semi-automated algorithms to enhance metadata, and further work on client applications.

Variable-scale Geo-information

NARCIS (Netherlands)

Meijers, B.M.

2011-01-01

The use of geo-information is changing by the advent of new mobile devices, such as tablet-pc's that harness a lot of computing power. This type of information is more and more applied in mainstream digital consumer products, in a net-centric environment (i.e. dissemination takes place via the

Location-based solutions in the Experience centre

DEFF Research Database (Denmark)

Hansen, Dan Witzner; Alapetite, Alexandre; Holdgaard, Nanna

2009-01-01

In this paper we present a prototype system for location-based guiding. A user survey has been conducted and the observations are used to support design choices. The prototype allows for both indoor and outdoor navigation at and in the vicinity of the NaturBornholm' experience centre in Denmark u...... using a combination of Bluetooth, Near Field Communication (NFC), GPS and QR codes. Bluetooth, NFC and GPS are used for location-based information and QR codes are used to convey user preferences....

Efficient Information Access for Location-Based Services in Mobile Environments

Science.gov (United States)

Lee, Chi Keung

2009-01-01

The demand for pervasive access of location-related information (e.g., local traffic, restaurant locations, navigation maps, weather conditions, pollution index, etc.) fosters a tremendous application base of "Location Based Services (LBSs)". Without loss of generality, we model location-related information as "spatial objects" and the accesses…

EuroGeoSurveys

Science.gov (United States)

Demicheli, L.; Ludden, J. N.; Robida, F.

2012-04-01

In order to create safe, healthy and wealthy places to live in, it is vital that we understand our planet. At national level the collection of information on the state of the solid Earth and its processes is normally mandated to Geological Surveys. In fact, a Geological Survey is the national institution responsible for the geological inventory, monitoring, knowledge and research for the security, health and prosperity of the society. And EuroGeoSurveys (EGS) is the organisation representing the Geological Surveys from 33 countries around Europe. With one member for each country of the European Union and beyond, including the Russian Federation and Ukraine, the EGS network covers the whole continent. EGS'principal purpose is to provide geoscientific knowledge that underpins European policies and regulations for the benefit of society. Naturally, in our day-to-day activities, we contribute to the merging of economic, environmental and social agendas. Engaging a joint workforce of several thousands of geoscientists, also involving regional geological surveys in Germany, Italy and Spain, we strive to be the first body to be contacted when there is an international need for European geodata, or'geo-help'. For this reason we work on a daily basis with the EU institutions, and are considered the natural source of information on Earth science issues and relevant downstream applications in Europe. Our General Secretariat is based in the European Quarter of Brussels close to the European Commission, the EU Council, the European Parliament, and the political seat of NATO. Our operational strategy is based on the cooperation between national institutions, which enables to synergistically integrate both information and activities of our member organisations. This has allowed us to make significant progress over the years, permitting geology to become a topic deserving great attention on the European agenda. In order to enable a quick but high quality response to requests for

GeoCEGAS: natural gas distribution management system

Energy Technology Data Exchange (ETDEWEB)

Ribeiro, Lorena C.J. [Companhia de Gas do Ceara (CEGAS), Fortaleza, CE (Brazil); Targa, Fernando O. [Gestao Empresarial e Informatica Ltda. (GEMPI), Sao Paulo, SP (Brazil)

2009-07-01

This Technical Paper approach the conception, architecture, design, construction, and implementation of GeoCEGAS, a spatially enabled corporate management information system, oriented to store and provide Web access, to information associated with the natural gas distribution network, owned by CEGAS. This paper reports business processes, business entities and business intelligence approached on the project, as well as an overview of system architecture, applications, and technology used on the implementation of GeoCEGAS. Finally, is presented an introduction to the work methodology used, as well a synopsis of benefits achievements. (author)

Interpreting aerosol lifetimes using the GEOS-Chem model and constraints from radionuclide measurements

Energy Technology Data Exchange (ETDEWEB)

Croft, B. [Dalhousie Univ., Halifax (Canada). Dept. of Physics and Atmospheric Science; Pierce, J.R. [Dalhousie Univ., Halifax (Canada). Dept. of Physics and Atmospheric Science; Colorado State Univ., Fort Collins, CO (United States); Martin, R.V. [Dalhousie Univ., Halifax (Canada). Dept. of Physics and Atmospheric Science; Harvard-Smithsonian Center for Astrophysics, Cambridge, MA (United States)

2014-07-01

Fukushima emissions), but similar to the mean lifetime of 3.9 days for the {sup 137}Cs emissions injected with a uniform spread through the model's Northern Hemisphere boundary layer. Simulated e-folding times were insensitive to emission parameters (altitude, location, and time), suggesting that these measurement-based e-folding times provide a robust constraint on simulated e-folding times. Despite the reasonable global mean agreement of GEOS-Chem with measurement e-folding times, site by site comparisons yield differences of up to a factor of two, which suggest possible deficiencies in either the model transport, removal processes or the representation of {sup 137}Cs removal, particularly in the tropics and at high latitudes. There is an ongoing need to develop constraints on aerosol lifetimes, but these measurement-based constraints must be carefully interpreted given the sensitivity of mean lifetimes and e-folding times to both mixing and removal processes.

ExoGeoLab Pilot Project for Landers, Rovers and Instruments

Science.gov (United States)

Foing, Bernard

2010-05-01

We have developed a pilot facility with a Robotic Test Bench (ExoGeoLab) and a Mobile Lab Habitat (ExoHab). They can be used to validate concepts and external instruments from partner institutes. The ExoGeoLab research incubator project, has started in the frame of a collaboration between ILEWG (International Lunar Exploration working Group http://sci.esa.int/ilewg), ESTEC, NASA and academic partners, supported by a design and control desk in the European Space Incubator (ESI), as well as infrastructure. ExoGeoLab includes a sequence of technology and research pilot project activities: - Data analysis and interpretation of remote sensing and in-situ data, and merging of multi-scale data sets - Procurement and integration of geophysical, geo-chemical and astrobiological breadboard instruments on a surface station and rovers - Integration of cameras, environment and solar sensors, Visible and near IR spectrometer, Raman spectrometer, sample handling, cooperative rovers - Delivery of a generic small planetary lander demonstrator (ExoGeoLab lander, Sept 2009) as a platform for multi-instruments tests - Research operations and exploitation of ExoGeoLab test bench for various conceptual configurations, and support for definition and design of science surface packages (Moon, Mars, NEOs, outer moons) - Field tests of lander, rovers and instruments in analogue sites (Utah MDRS 2009 & 2010, Eifel volcanic park in Sept 2009, and future campaigns). Co-authors, ILEWG ExoGeoLab & ExoHab Team: B.H. Foing(1,11)*#, C. Stoker(2,11)*, P. Ehrenfreund(10,11), L. Boche-Sauvan(1,11)*, L. Wendt(8)*, C. Gross(8, 11)*, C. Thiel(9)*, S. Peters(1,6)*, A. Borst(1,6)*, J. Zavaleta(2)*, P. Sarrazin(2)*, D. Blake(2), J. Page(1,4,11), V. Pletser(5,11)*, E. Monaghan(1)*, P. Mahapatra(1)#, A. Noroozi(3), P. Giannopoulos(1,11) , A. Calzada(1,6,11), R. Walker(7), T. Zegers(1, 15) #, G. Groemer(12)# , W. Stumptner(12)#, B. Foing(2,5), J. K. Blom(3)#, A. Perrin(14)#, M. Mikolajczak(14)#, S. Chevrier(14

Geo-Mechanical Characterization of Carbonate Rock Masses by Means of Laser Scanner Technique

Science.gov (United States)

Palma, Biagio; Parise, Mario; Ruocco, Anna

2017-12-01

Knowledge of the geometrical and structural setting of rock masses is crucial to evaluate the stability and to design the most suitable stabilization works. In this work we use the Terrestrial Laser Scanning (TLS) at the site of the Grave of the Castellana Caves, a famous show cave in southern Italy. The Grave is the natural access to the cave system, produced by collapse of the vault, due to upward progression of instabilities in the carbonate rock masses. It is about 55-m high, bell-shaped, with maximum width of 120 m. Aim of the work is the characterization of carbonate rock masses from the structural and geo-mechanical standpoints through the use of innovative survey techniques. TLS survey provides a product consisting of millions of geo-referenced points, to be managed in space, to become a suitable database for the morphological and geological-structural analysis. Studying by means of TLS a rock face, partly inaccessible or located in very complex environments, allows to investigate slopes in their overall areal extent, thus offering advantages both as regards safety of the workers and time needed for the survey. In addition to TLS, the traditional approach was also followed by performing scanlines surveys along the rims of the Grave, following the ISRM recommendations for characterization of discontinuity in rock masses. A quantitative comparison among the data obtained by TLS technique and those deriving from the classical geo-mechanical survey is eventually presented, to discuss potentiality of drawbacks of the different techniques used for surveying the rock masses.

A distributed charge storage with GeO2 nanodots

International Nuclear Information System (INIS)

Chang, T.C.; Yan, S.T.; Hsu, C.H.; Tang, M.T.; Lee, J.F.; Tai, Y.H.; Liu, P.T.; Sze, S.M.

2004-01-01

In this study, a distributed charge storage with GeO 2 nanodots is demonstrated. The mean size and aerial density of the nanodots embedded in SiO 2 are estimated to be about 5.5 nm and 4.3x10 11 cm -2 , respectively. The composition of the dots is also confirmed to be GeO 2 by x-ray absorption near-edge structure analyses. A significant memory effect is observed through the electrical measurements. Under the low voltage operation of 5 V, the memory window is estimated to ∼0.45 V. Also, a physical model is proposed to demonstrate the charge storage effect through the interfacial traps of GeO 2 nanodots

Study on geo-information modelling

Czech Academy of Sciences Publication Activity Database

Klimešová, Dana

2006-01-01

Roč. 5, č. 5 (2006), s. 1108-1113 ISSN 1109-2777 Institutional research plan: CEZ:AV0Z10750506 Keywords : control GIS * geo-information modelling * uncertainty * spatial temporal approach Web Services Subject RIV: BC - Control Systems Theory

Location-based solutions in the experience center

DEFF Research Database (Denmark)

Witzner Hansen, Dan; Alapetite, Alexandre; Holdgaard, Nanna

2009-01-01

In this paper we present a prototype system for location-based guiding. A user survey has been conducted and the observations are used to support design choices. The prototype allows for both indoor and outdoor navigation at and in the vicinity of the NaturBornholm [1] experience centre in Denmar...... using a combination of Bluetooth, Near field communication (NFC), GPS and QR-codes. Bluetooth, NFC, and GPS are used for location-based information and QR-codes are used to convey user preferences. [1] http://naturbornholm.dk...

Enhancing Location-Related Hydrogeological Knowledge

Directory of Open Access Journals (Sweden)

Alexander Kmoch

2018-03-01

Full Text Available We analyzed the corpus of three geoscientific journals to investigate if there are enough locational references in research articles to apply a geographical search method, such as the example of New Zealand. Based on all available abstracts and all freely available papers of the “New Zealand Journal of Geology and Geophysics”, the “New Zealand Journal of Marine and Freshwater Research”, and the “Journal of Hydrology, New Zealand”, we searched title, abstracts, and full texts for place name occurrences that match records from the official Land Information New Zealand (LINZ gazetteer. We generated ISO standard compliant metadata records for each article including the spatial references and made them available in a public catalogue service. This catalogue can be queried for articles based on authors, titles, keywords, topics, and spatial reference. We visualize the results in a map to show which area the research articles are about, and how much and how densely geographic space is described through these geoscientific research articles by mapping mentioned place names by their geographic locations. We outlined the methodology and technical framework for the geo-referencing of the journal articles and the platform design for this knowledge inventory. The results indicate that the use of well-crafted abstracts for journal articles with carefully chosen place names of relevance for the article provides a guideline for geographically referencing unstructured information like journal articles and reports in order to make such resources discoverable through geographical queries. Lastly, this approach can actively support integrated holistic assessment of water resources and support decision making.

GeoMod 2014 - Modelling in geoscience

Science.gov (United States)

Leever, Karen; Oncken, Onno

2016-08-01

GeoMod is a biennial conference to review and discuss latest developments in analogue and numerical modelling of lithospheric and mantle deformation. GeoMod2014 took place at the GFZ German Research Centre for Geosciences in Potsdam, Germany. Its focus was on rheology and deformation at a wide range of temporal and spatial scales: from earthquakes to long-term deformation, from micro-structures to orogens and subduction systems. It also addressed volcanotectonics and the interaction between tectonics and surface processes (Elger et al., 2014). The conference was followed by a 2-day short course on "Constitutive Laws: from Observation to Implementation in Models" and a 1-day hands-on tutorial on the ASPECT numerical modelling software.

Parametric instability in GEO 600 interferometer

International Nuclear Information System (INIS)

Gurkovsky, A.G.; Vyatchanin, S.P.

2007-01-01

We present analysis of undesirable effect of parametric instability in signal recycled GEO 600 interferometer. The basis for this effect is provided by excitation of additional (Stokes) optical mode, having frequency ω 1 , and mirror elastic mode, having frequency ω m , when the optical energy stored in the main FP cavity mode, having frequency ω 0 , exceeds a certain threshold and detuning Δ=ω 0 -ω 1 -ω m is small. We discuss the potential of observing parametric instability and its precursors in GEO 600 interferometer. This approach provides the best option to get familiar with this phenomenon, to develop experimental methods to depress it and to test the effectiveness of these methods in situ

Collaborative Web-Enabled GeoAnalytics Applied to OECD Regional Data

Science.gov (United States)

Jern, Mikael

Recent advances in web-enabled graphics technologies have the potential to make a dramatic impact on developing collaborative geovisual analytics (GeoAnalytics). In this paper, tools are introduced that help establish progress initiatives at international and sub-national levels aimed at measuring and collaborating, through statistical indicators, economic, social and environmental developments and to engage both statisticians and the public in such activities. Given this global dimension of such a task, the “dream” of building a repository of progress indicators, where experts and public users can use GeoAnalytics collaborative tools to compare situations for two or more countries, regions or local communities, could be accomplished. While the benefits of GeoAnalytics tools are many, it remains a challenge to adapt these dynamic visual tools to the Internet. For example, dynamic web-enabled animation that enables statisticians to explore temporal, spatial and multivariate demographics data from multiple perspectives, discover interesting relationships, share their incremental discoveries with colleagues and finally communicate selected relevant knowledge to the public. These discoveries often emerge through the diverse backgrounds and experiences of expert domains and are precious in a creative analytics reasoning process. In this context, we introduce a demonstrator “OECD eXplorer”, a customized tool for interactively analyzing, and collaborating gained insights and discoveries based on a novel story mechanism that capture, re-use and share task-related explorative events.

Protection of Location Privacy Based on Distributed Collaborative Recommendations.

Science.gov (United States)

Wang, Peng; Yang, Jing; Zhang, Jian-Pei

2016-01-01

In the existing centralized location services system structure, the server is easily attracted and be the communication bottleneck. It caused the disclosure of users' location. For this, we presented a new distributed collaborative recommendation strategy that is based on the distributed system. In this strategy, each node establishes profiles of their own location information. When requests for location services appear, the user can obtain the corresponding location services according to the recommendation of the neighboring users' location information profiles. If no suitable recommended location service results are obtained, then the user can send a service request to the server according to the construction of a k-anonymous data set with a centroid position of the neighbors. In this strategy, we designed a new model of distributed collaborative recommendation location service based on the users' location information profiles and used generalization and encryption to ensure the safety of the user's location information privacy. Finally, we used the real location data set to make theoretical and experimental analysis. And the results show that the strategy proposed in this paper is capable of reducing the frequency of access to the location server, providing better location services and protecting better the user's location privacy.

Pre-Service Mathematics Teachers' Views about GeoGebra and Its Use

Science.gov (United States)

Horzum, Tugba; Ünlü, Melihan

2017-01-01

The purpose of this study was to determine the views of pre-service Mathematics teachers' (PMTs) about GeoGebra and its use after being exposed to GeoGebra activities designing processes. This is a case study which was conducted with 36 PMTs. Three open-ended questions were used, after the completion of the 14-week process of GeoGebra training and…

Geo-mapping of time trends in childhood caries risk a method for assessment of preventive care

Directory of Open Access Journals (Sweden)

Strömberg Ulf

2012-06-01

Full Text Available Abstract Background Dental caries is unevenly distributed within populations with a higher burden in low socio-economy groups. Several attempts have been made to allocate resources to those that need them the most; there is a need for convenient approaches to population-based monitoring of caries risk over time. The aim of this study was to develop the geo-map concept, addressing time trends in caries risk, and demonstrate the novel approach by analyzing epidemiological data from preschool residents in the region of Halland, Sweden. Methods The study population consisted of 9,973 (2006 and 10,927 (2010 children between 3 to 6years of age (~77% of the eligible population from whom caries data were obtained. Reported dmfs>0 for a child was considered as the primary caries outcome. Each study individual was geo-coded with respect to his/her residence parish (66 parishes in the region. Smoothed caries risk geo-maps, along with corresponding statistical certainty geo-maps, were produced by using the free software Rapid Inquiry Facility and the ESRI ArcGIS system. Parish-level socioeconomic data were available. Results The overall proportion of caries-free (dmfs=0 children improved from 84.0% in 2006 to 88.6% in 2010. The ratio of maximum and minimum (parish-level smoothed relative risks (SmRRs increased from 1.76/0.44=4.0 in 2006 to 2.37/0.33=7.2 in 2010, which indicated an increased geographical polarization of early childhood caries in the population. Eight parishes showed evidential, positional changes in caries risk between 2006 and 2010; their corresponding SmRRs and statistical certainty ranks changed markedly. No considerable parallel changes in parish-level socioeconomic characteristics were seen during the same time period. Conclusion Geo-maps based on caries risk can be used to monitor changes in caries risk over time. Thus, geo-mapping offers a convenient tool for evaluating the effectiveness of tailored health promotion and preventive

Atmosphere Refraction Effects in Object Locating for Optical Satellite Remote Sensing Images

Directory of Open Access Journals (Sweden)

YAN Ming

2015-09-01

Full Text Available The collinear rigorous geometric model contains the atmosphere refraction geometric error in off-nadir observation. In order to estimate and correct the atmosphere refraction geometric error, the ISO international standard atmospheric model and Owens atmosphere refractive index algorithm are applied to calculate the index of atmosphere refraction in different latitude and altitude. The paper uses the weighted mean algorithm to reduce the eight layers ISO standard atmospheric model into a simple troposphere and stratosphere two layers spherical atmosphere. And the LOS vector track geometric algorithm is used to estimate the atmosphere refraction geometric error in different observation off-nadir angle. The results show that the atmosphere refraction will introduce about 2.5 m or 9 m geometric displacement in 30 or 45 degree off-nadir angle individual. Therefore, during geo-location processing of agile platform and extra wide high spatial resolution imagery, there is need to take into account the influence of atmosphere refraction and correct the atmosphere refraction geometric error to enhance the geo-location precision without GCPs.

Geophysical Data Sets in GeoMapApp

Science.gov (United States)

Goodwillie, A. M.

2017-12-01

GeoMapApp (http://www.geomapapp.org), a free map-based data tool developed at Lamont-Doherty Earth Observatory, provides access to hundreds of integrated geoscience data sets that are useful for geophysical studies. Examples include earthquake and volcano catalogues, gravity and magnetics data, seismic velocity tomographic models, geological maps, geochemical analytical data, lithospheric plate boundary information, geodetic velocities, and high-resolution bathymetry and land elevations. Users can also import and analyse their own data files. Data analytical functions provide contouring, shading, profiling, layering and transparency, allowing multiple data sets to be seamlessly compared. A new digitization and field planning portal allow stations and waypoints to be generated. Sessions can be saved and shared with colleagues and students. In this eLightning presentation we will demonstrate some of GeoMapApp's capabilities with a focus upon subduction zones and tectonics. In the attached screen shot of the Cascadia margin, the contoured depth to the top of the subducting Juan de Fuca slab is overlain on a shear wave velocity depth slice. Geochemical data coloured on Al2O3 and scaled on MgO content is shown as circles. The stack of data profiles was generated along the white line.

When Location-Based Services Meet Databases

Directory of Open Access Journals (Sweden)

Dik Lun Lee

2005-01-01

Full Text Available As location-based services (LBSs grow to support a larger and larger user community and to provide more and more intelligent services, they must face a few fundamental challenges, including the ability to not only accept coordinates as location data but also manipulate high-level semantics of the physical environment. They must also handle a large amount of location updates and client requests and be able to scale up as their coverage increases. This paper describes some of our research in location modeling and updates and techniques for enhancing system performance by caching and batch processing. It can be observed that the challenges facing LBSs share a lot of similarity with traditional database research (i.e., data modeling, indexing, caching, and query optimization but the fact that LBSs are built into the physical space and the opportunity to exploit spatial locality in system design shed new light on LBS research.

FID GEO: Digital transformation and Open Access in Germany's geoscience research community

Science.gov (United States)

Hübner, Andreas; Martinson, Guntars; Bertelmann, Roland; Elger, Kirsten; Pfurr, Norbert; Schüler, Mechthild

2017-04-01

The 'Specialized Information Service for Solid Earth Sciences' (FID GEO) supports Germany's geoscience research community in 1) electronic publishing of i) institutional and "grey" literature not released in publishing houses and ii) pre- and postprints of research articles 2) digitising geoscience literature and maps and 3) addressing the publication of research data associated with peer-reviewed research articles (data supplements). Established in 2016, FID GEO is funded by the German Research Foundation (DFG) and is run by the Göttingen State and University Library (SUB Göttingen) and the GFZ German Research Centre for Geosciences. Here we present recent success stories and lessons learned. With regard to digitisation, FID GEO received a request from one of the most prestigious geoscience societies in Germany to digitise back-issues of its journals that are so far only available in print. Aims are to ensure long-term availability in Open Access and high visibility by DOI-referenced electronic publication via the FID GEO repository. While digitisation will be financed by FID GEO funds, major challenges are to identify the copyright holders (journals date back to 1924) and negotiate digitisation and publication rights. With respect to research data publishing, we present how we target scientists to integrate the publication of research data into their workflows and institutions to promote the topic. For the latter, we successfully take advantage of existing networks as entry points to the community, like the research network Geo.X in the Berlin-Brandenburg area, individual learned societies as well as their overarching structures DV Geo and GeoUnion. FID GEO promotes the Statement of Commitment of the Coalition for Publishing Data in the Earth and Space Sciences (COPDESS) as well as the FAIR Data Principles in presentations to the above-mentioned groups and institutions. Our aim is to eventually transfer the positive feedback from the geoscience community into

Reservoir Maintenance and Development Task Report for the DOE Geothermal Technologies Office GeoVision Study.

Energy Technology Data Exchange (ETDEWEB)

Lowry, Thomas Stephen [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Finger, John T. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Carrigan, Charles R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Foris, Adam [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Kennedy, Mack B. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Corbet, Thomas F. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Doughty, Christine A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Pye, Steven [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Sonnenthal, Eric L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-09-01

This report documents the key findings from the Reservoir Maintenance and Development (RM&D) Task of the U.S. Department of Energy's (DOE), Geothermal Technologies Office (GTO) Geothermal Vision Study (GeoVision Study). The GeoVision Study had the objective of conducting analyses of future geothermal growth based on sets of current and future geothermal technology developments. The RM&D Task is one of seven tasks within the GeoVision Study with the others being, Exploration and Confirmation, Potential to Penetration, Institutional Market Barriers, Environmental and Social Impacts, Thermal Applications, and Hybrid Systems. The full set of findings and the details of the GeoVision Study can be found in the final GeoVision Study report on the DOE-GTO website. As applied here, RM&D refers to the activities associated with developing, exploiting, and maintaining a known geothermal resource. It assumes that the site has already been vetted and that the resource has been evaluated to be of sufficient quality to move towards full-scale development. It also assumes that the resource is to be developed for power generation, as opposed to low-temperature or direct use applications. This document presents the key factors influencing RM&D from both a technological and operational standpoint and provides a baseline of its current state. It also looks forward to describe areas of research and development that must be pursued if the development geothermal energy is to reach its full potential.

ExaGeoStat: A High Performance Unified Framework for Geostatistics on Manycore Systems

KAUST Repository

Abdulah, Sameh; Ltaief, Hatem; Sun, Ying; Genton, Marc G.; Keyes, David E.

2017-01-01

from climate and environmental science. ExaGeoStat provides a reference evaluation of statistical parameters, with which to assess the validity of the various approaches based on approximation. The framework takes a first step in the merger of large

Geo-communication and information design

DEFF Research Database (Denmark)

Brodersen, Lars

2009-01-01

of processes, procedures, factors, relations etc., all forming parts of a theory on geo-communication and information design. How do we decide whether to transmit content A or content B to another person? We make a decision. Making decisions does not normally give rise to difficulties, although a great deal......This article is an abstract of the book 'Geo-communication and information design'. The work involved in the book was inspired by the author's sense of wonder that there were apparently no existing theories, models etc. capable of identifying and choosing the content of information in systematic...... of debate might occur during the decision-making process. But if the question is extended to include a demand for systematics and consciousness (control) in the procedure adopted, the whole issue becomes more complex. How do we decide to transmit content A or content B to another person on a systematic...

Three-dimensional Geological and Geo-mechanical Modelling of Repositories for Nuclear Waste Disposal in Deep Geological Structures

International Nuclear Information System (INIS)

Fahland, Sandra; Hofmann, Michael; Bornemann, Otto; Heusermann, Stefan

2008-01-01

To prove the suitability and safety of underground structures for the disposal of radioactive waste extensive geo-scientific research and development has been carried out by BGR over the last decades. Basic steps of the safety analysis are the geological modelling of the entire structure including the host rock, the overburden and the repository geometry as well as the geo-mechanical modelling taking into account the 3-D modelling of the underground structure. The geological models are generated using the special-construction openGEO TM code to improve the visualisation an d interpretation of the geological data basis, e.g. borehole, mine, and geophysical data. For the geo-mechanical analysis the new JIFE finite-element code has been used to consider large 3-D structures with complex inelastic material behaviour. To establish the finite-element models needed for stability and integrity calculations, the geological models are simplified with respect to homogenous rock layers with uniform material behaviour. The modelling results are basic values for the evaluation of the stability of the repository mine and the long-term integrity of the geological barrier. As an example of application, the results of geological and geo-mechanical investigations of the Morsleben repository based on 3-D modelling are presented. (authors)

Newspaper archives + text mining = rich sources of historical geo-spatial data

Science.gov (United States)

Yzaguirre, A.; Smit, M.; Warren, R.

2016-04-01

Newspaper archives are rich sources of cultural, social, and historical information. These archives, even when digitized, are typically unstructured and organized by date rather than by subject or location, and require substantial manual effort to analyze. The effort of journalists to be accurate and precise means that there is often rich geo-spatial data embedded in the text, alongside text describing events that editors considered to be of sufficient importance to the region or the world to merit column inches. A regional newspaper can add over 100,000 articles to its database each year, and extracting information from this data for even a single country would pose a substantial Big Data challenge. In this paper, we describe a pilot study on the construction of a database of historical flood events (location(s), date, cause, magnitude) to be used in flood assessment projects, for example to calibrate models, estimate frequency, establish high water marks, or plan for future events in contexts ranging from urban planning to climate change adaptation. We then present a vision for extracting and using the rich geospatial data available in unstructured text archives, and suggest future avenues of research.

A Concept of Location-Based Social Network Marketing

DEFF Research Database (Denmark)

Tussyadiah, Iis

2012-01-01

A stimulus-response model of location-based social network marketing is conceptualized based on an exploratory investigation. Location-based social network applications are capable of generating marketing stimuli from merchant, competition-based, and connection-based rewards resulted from relevance...... and connectivity. Depending on consumption situations, consumer characteristics, and social network structure, these rewards lead to actual behavior that manifests in variety behavior (i.e., patronage to new places) and loyalty behavior (i.e., increased frequency of patronage to familiar places). This behavior...... implies changes in patterns of mobility, making this marketing approach particularly relevant for tourism and hospitality businesses. Managerial implications and recommendations for further studies are provided....

Privacy vs. Reward in Indoor Location-Based Services

Directory of Open Access Journals (Sweden)

Fawaz Kassem

2016-10-01

Full Text Available With the advance of indoor localization technology, indoor location-based services (ILBS are gaining popularity. They, however, accompany privacy concerns. ILBS providers track the users’ mobility to learn more about their behavior, and then provide them with improved and personalized services. Our survey of 200 individuals highlighted their concerns about this tracking for potential leakage of their personal/private traits, but also showed their willingness to accept reduced tracking for improved service. In this paper, we propose PR-LBS (Privacy vs. Reward for Location-Based Service, a system that addresses these seemingly conflicting requirements by balancing the users’ privacy concerns and the benefits of sharing location information in indoor location tracking environments. PR-LBS relies on a novel location-privacy criterion to quantify the privacy risks pertaining to sharing indoor location information. It also employs a repeated play model to ensure that the received service is proportionate to the privacy risk. We implement and evaluate PR-LBS extensively with various real-world user mobility traces. Results show that PR-LBS has low overhead, protects the users’ privacy, and makes a good tradeoff between the quality of service for the users and the utility of shared location data for service providers.

Bridging the Gap Between Surveyors and the Geo-Spatial Society

Science.gov (United States)

Müller, H.

2016-06-01

For many years FIG, the International Association of Surveyors, has been trying to bridge the gap between surveyors and the geospatial society as a whole, with the geospatial industries in particular. Traditionally the surveying profession contributed to the good of society by creating and maintaining highly precise and accurate geospatial data bases, based on an in-depth knowledge of spatial reference frameworks. Furthermore in many countries surveyors may be entitled to make decisions about land divisions and boundaries. By managing information spatially surveyors today develop into the role of geo-data managers, the longer the more. Job assignments in this context include data entry management, data and process quality management, design of formal and informal systems, information management, consultancy, land management, all that in close cooperation with many different stakeholders. Future tasks will include the integration of geospatial information into e-government and e-commerce systems. The list of professional tasks underpins the capabilities of surveyors to contribute to a high quality geospatial data and information management. In that way modern surveyors support the needs of a geo-spatial society. The paper discusses several approaches to define the role of the surveyor within the modern geospatial society.

Design of a TDOA location engine and development of a location system based on chirp spread spectrum.

Science.gov (United States)

Wang, Rui-Rong; Yu, Xiao-Qing; Zheng, Shu-Wang; Ye, Yang

2016-01-01

Location based services (LBS) provided by wireless sensor networks have garnered a great deal of attention from researchers and developers in recent years. Chirp spread spectrum (CSS) signaling formatting with time difference of arrival (TDOA) ranging technology is an effective LBS technique in regards to positioning accuracy, cost, and power consumption. The design and implementation of the location engine and location management based on TDOA location algorithms were the focus of this study; as the core of the system, the location engine was designed as a series of location algorithms and smoothing algorithms. To enhance the location accuracy, a Kalman filter algorithm and moving weighted average technique were respectively applied to smooth the TDOA range measurements and location results, which are calculated by the cooperation of a Kalman TDOA algorithm and a Taylor TDOA algorithm. The location management server, the information center of the system, was designed with Data Server and Mclient. To evaluate the performance of the location algorithms and the stability of the system software, we used a Nanotron nanoLOC Development Kit 3.0 to conduct indoor and outdoor location experiments. The results indicated that the location system runs stably with high accuracy at absolute error below 0.6 m.

Why new tools were developed for the 'GeoPortalNetwork : Liberty United" project

NARCIS (Netherlands)

Vanmeulebrouk, B.; Van Swol, R.; Kuyper, M.; Bulens, J.; Zevenbergen, J.A.

2009-01-01

As part of the national innovation co-funding scheme “Space for Geo-information” the project “GeoPortal Network: Liberty United” ran from late 2005 till the end of 2008. Purpose of the project was to promote access to geo-spatial information via web services. To achieve this goal, a network of

Location-Based Services and Privacy Protection Under Mobile Cloud Computing

OpenAIRE

Yan, Yan; Xiaohong, Hao; Wanjun, Wang

2015-01-01

Location-based services can provide personalized services based on location information of moving objects and have already been widely used in public safety services, transportation, entertainment and many other areas. With the rapid development of mobile communication technology and popularization of intelligent terminals, there will be great commercial prospects to provide location-based services under mobile cloud computing environment. However, the high adhesion degree of mobile terminals...

West Bank Gaza Geo-MIS System

Data.gov (United States)

US Agency for International Development — The Geo-MIS System is USAID/West Bank and Gaza's primary system for capturing and managing projectrelated information. Its purpose is to assist USAID and its...

GeoInt: the first macroseismic intensity database for the Republic of Georgia

Science.gov (United States)

Varazanashvili, O.; Tsereteli, N.; Bonali, F. L.; Arabidze, V.; Russo, E.; Pasquaré Mariotto, F.; Gogoladze, Z.; Tibaldi, A.; Kvavadze, N.; Oppizzi, P.

2018-05-01

Our work is intended to present the new macroseismic intensity database for the Republic of Georgia—hereby named GeoInt—which includes earthquakes from the historical (from 1250 B.C. onwards) to the instrumental era. Such database is composed of 111 selected earthquakes and related 3944 intensity data points (IDPs) for 1509 different localities, reported in the Medvedev-Sponheuer-Karnik scale (MSK). Regarding the earthquakes, the M S is in the 3.3-7 range and the depth is in the 2-36 km range. The entire set of IDPs is characterized by intensities ranging from 2-3 to 9-10 and covers an area spanning from 39.508° N to 45.043° N in a N-S direction and from 37.324° E to 48.500° E in an E-W direction, with some of the IDPs located outside the Georgian border, in the (i) Republic of Armenia, (ii) Russian Federation, (iii) Republic of Turkey, and (iv) Republic of Azerbaijan. We have revised each single IDP and have reevaluated and homogenized intensity values to the MSK scale. In particular, regarding the whole set of 3944 IDPs, 348 belong to the Historical era (pre-1900) and 3596 belong to the instrumental era (post-1900). With particular regard to the 3596 IDPs, 105 are brand new (3%), whereas the intensity values for 804 IDPs have been reevaluated (22%); for 2687 IDPs (75%), intensities have been confirmed from previous interpretations. We introduce this database as a key input for further improvements in seismic hazard modeling and seismic risk calculation for this region, based on macroseismic intensity; we report all the 111 earthquakes with available macroseismic information. The GeoInt database is also accessible online at http://www.enguriproject.unimib.it and will be kept updated in the future.

Chilean geo client application for disasters

Science.gov (United States)

Suárez, Rodrigo F.; Lovison, Lucia; Potters, Martinus

2018-05-01

The global network of the Group on Earth Observation, GEO, connects all kinds of professionals from public and private institutions with data providers, sharing information to face the challenges of global changes and human development and they are creating a Global Earth Observation System of Systems (GEOSS) to connect existing data infrastructures. A GEOSS Architecture Implementation Pilot Project for Disasters in Chile (AIP-8) was created as part of a capacity building initiative and representatives of different national agencies in Chile, along with international experts, formed a GEOSS Capacity Building Working Group (Lovison et al, 2016). Consistent with the objectives of GEOSS AIP-8 Chile, we developed and implemented a prototype service based on web services, mobile applications and other communication channels, which allows connecting different sources of information, aiming to reduce population vulnerability to natural disasters such as: earthquakes, flooding, wild fires and tsunamis, which is presented here. The GEO Chile client application is a JavaScript application using GEODAB brokering services, GIS technology and disaster information provided by national and international disaster services, including public and private organizations, where cartography becomes fundamental as a tool to provide realism and ubiquity to the information. Seven hotpots are targeted: Calbuco, Copahue and Villarrica volcanoes areas, Valparaíso city, which is frequently a victim of wildfires in the zone where population meets forest and Iquique, Illapel and Talcahuano, areas frequently struck by earthquakes and tsunamis.

Using GeoRePORT to report socio-economic potential for geothermal development

Energy Technology Data Exchange (ETDEWEB)

Young, Katherine R.; Levine, Aaron

2018-07-01

The Geothermal Resource Portfolio Optimization and Reporting Tool (GeoRePORT, http://en.openei.org/wiki/GeoRePORT) was developed for reporting resource grades and project readiness levels, providing the U.S. Department of Energy a consistent and comprehensible means of evaluating projects. The tool helps funding organizations (1) quantitatively identify barriers, (2) develop measureable goals, (3) objectively evaluate proposals, including contribution to goals, (4) monitor progress, and (5) report portfolio performance. GeoRePORT assesses three categories: geological, technical, and socio-economic. Here, we describe GeoRePORT, then focus on the socio-economic assessment and its applications for assessing deployment potential in the U.S. Socio-economic attributes include land access, permitting, transmission, and market.

New Results from the Geoengineering Model Intercomparison Project (GeoMIP)

Science.gov (United States)

Robock, A.; Kravitz, B.

2013-12-01

The Geoengineering Model Intercomparison Project (GeoMIP) was designed to determine robust climate system model responses to Solar Radiation Management (SRM). While mitigation (reducing greenhouse gases emissions) is the most effective way of reducing future climate change, SRM (the deliberate modification of incoming solar radiation) has been proposed as a means of temporarily alleviating some of the effects of global warming. For society to make informed decisions as to whether SRM should ever be implemented, information is needed on the benefits, risks, and side effects, and GeoMIP seeks to aid in that endeavor. GeoMIP has organized four standardized climate model simulations involving reduction of insolation or increased amounts of stratospheric sulfate aerosols to counteract increasing greenhouse gases. Thirteen comprehensive atmosphere-ocean general circulation models have participated in the project so far. GeoMIP is a 'CMIP Coordinated Experiment' as part of the Climate Model Intercomparison Project 5 (CMIP5) and has been endorsed by SPARC (Stratosphere-troposphere Processes And their Role in Climate). GeoMIP has held three international workshops and has produced a number of recent journal articles. GeoMIP has found that if increasing greenhouse gases could be counteracted with insolation reduction, the global average temperature could be kept constant, but global average precipitation would reduce, particularly in summer monsoon regions around the world. Temperature changes would also not be uniform. The tropics would cool, but high latitudes would warm, with continuing, but reduced sea ice and ice sheet melting. Temperature extremes would still increase, but not as much as without SRM. If SRM were halted all at once, there would be rapid temperature and precipitation increases at 5-10 times the rates from gradual global warming. SRM combined with CO2 fertilization would have small impacts on rice production in China, but would increase maize production

The Spatio-Temporal Evolution of Geo-Economic Relationships between China and ASEAN Countries: Competition or Cooperation?

Directory of Open Access Journals (Sweden)

Shufang Wang

2017-06-01

Full Text Available In the last 30 years, China’s economic power has experienced great changes and has brought about a profound impact on the world economy. This led us to ask a question: do changes in China’s economic power shift the geo-economic relationships between China and its neighboring countries? To answer this question, we researched the evolution of geo-economic relationships between China and the Association of Southeast Asian Nations (ASEAN countries. Using the Euclidean distance method, we explored the changes in these geo-economic relationships between China and ASEAN countries from 1980 to 2014. Our findings resulted in five conclusions: (1 Over time, geo-economic relationships between China and ASEAN countries remained relatively stable. (2 Geographically, the main geo-economic relationships between China and continental ASEAN countries were complementary, while the main geo-economic relationships between China and island ASEAN countries were competitive. (3 Geopolitics and geo-culture were attributed to the changes in geo-economic relationships. (4 The evolution of geo-economic relationships was characterized by path dependence. (5 Geo-economic relationships between China and ASEAN countries could be classified into four types: game type, with high cooperation and competition; complementary type, with high cooperation and low competition; fight type, with low cooperation and high competition; and loose type, with low cooperation and competition. Our findings contribute to improving the understanding of geo-economic relationships.

Complex Functions with GeoGebra

Science.gov (United States)

Breda, Ana Maria D'azevedo; Dos Santos, José Manuel Dos Santos

2016-01-01

Complex functions, generally feature some interesting peculiarities, seen as extensions of real functions. The visualization of complex functions properties usually requires the simultaneous visualization of two-dimensional spaces. The multiple Windows of GeoGebra, combined with its ability of algebraic computation with complex numbers, allow the…

Designing a New Car Rental Service Using Location-Based Services

OpenAIRE

Dessie, Solomon

2015-01-01

This thesis concentrates on improving the car rental services offered by the case company by introducing location-based services. For many years, the company has conducted a rental business in a similar manner with other car rental companies, and now it is introducing a new service system based on online interaction and location-based services. The outcome of the study is a blueprint for the case company regarding the design of a car rental service using location-based services. This stud...

Geo-neutrinos and earth's interior

International Nuclear Information System (INIS)

Fiorentini, Gianni; Lissia, Marcello; Mantovani, Fabio

2007-01-01

The deepest hole that has ever been dug is about 12 km deep. Geochemists analyze samples from the Earth's crust and from the top of the mantle. Seismology can reconstruct the density profile throughout all Earth, but not its composition. In this respect, our planet is mainly unexplored. Geo-neutrinos, the antineutrinos from the progenies of U, Th and 40 K decays in the Earth, bring to the surface information from the whole planet, concerning its content of natural radioactive elements. Their detection can shed light on the sources of the terrestrial heat flow, on the present composition, and on the origins of the Earth. Geo-neutrinos represent a new probe of our planet, which can be exploited as a consequence of two fundamental advances that occurred in the last few years: the development of extremely low background neutrino detectors and the progress on understanding neutrino propagation. We review the status and the prospects of the field

Geo-Enrichment and Semantic Enhancement of Metadata Sets to Augment Discovery in Geoportals

Directory of Open Access Journals (Sweden)

Bernhard Vockner

2014-03-01

Full Text Available Geoportals are established to function as main gateways to find, evaluate, and start “using” geographic information. Still, current geoportal implementations face problems in optimizing the discovery process due to semantic heterogeneity issues, which leads to low recall and low precision in performing text-based searches. Therefore, we propose an enhanced semantic discovery approach that supports multilingualism and information domain context. Thus, we present workflow that enriches existing structured metadata with synonyms, toponyms, and translated terms derived from user-defined keywords based on multilingual thesauri and ontologies. To make the results easier and understandable, we also provide automated translation capabilities for the resource metadata to support the user in conceiving the thematic content of the descriptive metadata, even if it has been documented using a language the user is not familiar with. In addition, to text-enable spatial filtering capabilities, we add additional location name keywords to metadata sets. These are based on the existing bounding box and shall tweak discovery scores when performing single text line queries. In order to improve the user’s search experience, we tailor faceted search strategies presenting an enhanced query interface for geo-metadata discovery that are transparently leveraging the underlying thesauri and ontologies.

Remote interfacial dipole scattering and electron mobility degradation in Ge field-effect transistors with GeO x /Al2O3 gate dielectrics

Science.gov (United States)

Wang, Xiaolei; Xiang, Jinjuan; Wang, Shengkai; Wang, Wenwu; Zhao, Chao; Ye, Tianchun; Xiong, Yuhua; Zhang, Jing

2016-06-01

Remote Coulomb scattering (RCS) on electron mobility degradation is investigated experimentally in Ge-based metal-oxide-semiconductor field-effect-transistors (MOSFETs) with GeO x /Al2O3 gate stacks. It is found that the mobility increases with greater GeO x thickness (7.8-20.8 Å). The physical origin of this mobility dependence on GeO x thickness is explored. The following factors are excluded: Coulomb scattering due to interfacial traps at GeO x /Ge, phonon scattering, and surface roughness scattering. Therefore, the RCS from charges in gate stacks is studied. The charge distributions in GeO x /Al2O3 gate stacks are evaluated experimentally. The bulk charges in Al2O3 and GeO x are found to be negligible. The density of the interfacial charge is  +3.2  ×  1012 cm-2 at the GeO x /Ge interface and  -2.3  ×  1012 cm-2 at the Al2O3/GeO x interface. The electric dipole at the Al2O3/GeO x interface is found to be  +0.15 V, which corresponds to an areal charge density of 1.9  ×  1013 cm-2. The origin of this mobility dependence on GeO x thickness is attributed to the RCS due to the electric dipole at the Al2O3/GeO x interface. This remote dipole scattering is found to play a significant role in mobility degradation. The discovery of this new scattering mechanism indicates that the engineering of the Al2O3/GeO x interface is key for mobility enhancement and device performance improvement. These results are helpful for understanding and engineering Ge mobility enhancement.

Heat Retreat Locations in Cities - The Survey-Based Location Analysis of Heat Relief

Science.gov (United States)

Neht, Alice; Maximini, Claudia; Prenger-Berninghoff, Kathrin

2017-12-01

The adaptation of cities to climate change effects is one of the major strategies in urban planning to encounter the challenges of climate change (IPCC 2014). One of the fields of climate change adaption is dealing with heat events that occur more frequently and with greater intensity. Cities in particular are vulnerable to these events due to high population and infrastructure density. Proceeding urbanization calls for the existence of sufficient heat retreat locations (HRL) to enable relief for the population from heat in summer. This is why an extensive analysis of HRL is needed. This paper aims at the development of a survey-based location analysis of heat relief by identifying user groups, locations and characteristics of HRL based on a home survey that was conducted in three German cities. Key results of the study show that the majority of the participants of the survey are users of existing HRL, are affected by heat, and perceive heat as a burden in summer. Moreover, HRL that are located in close proximity are preferred by most users while their effect depends on the regional context that has to be considered in the analysis. Hence, this research presents an approach to heat relief that underlines the importance of HRL in cities by referring to selected examples of HRL types in densely populated areas of cities. HRL should especially be established and secured in densely built-up areas of cities. According to results of the survey, most HRL are located in public spaces, and the overall accessibility of HRL turned out to be an issue.

GeoChronos: An On-line Collaborative Platform for Earth Observation Scientists

Science.gov (United States)

Gamon, J. A.; Kiddle, C.; Curry, R.; Markatchev, N.; Zonta-Pastorello, G., Jr.; Rivard, B.; Sanchez-Azofeifa, G. A.; Simmonds, R.; Tan, T.

2009-12-01

included the IAI International Wireless Sensor Networking Summer School at the University of Alberta, and the IAI Tropi-Dry community. Current GeoChronos activities include the development of a web-based spectral library and related analytical and visualization tools, in collaboration with members of the SpecNet community. The GeoChronos portal will be open to all members of the earth observation science community when the project nears completion at the end of 2010.

GeoTrust Hub: A Platform For Sharing And Reproducing Geoscience Applications

Science.gov (United States)

Malik, T.; Tarboton, D. G.; Goodall, J. L.; Choi, E.; Bhatt, A.; Peckham, S. D.; Foster, I.; Ton That, D. H.; Essawy, B.; Yuan, Z.; Dash, P. K.; Fils, G.; Gan, T.; Fadugba, O. I.; Saxena, A.; Valentic, T. A.

2017-12-01

Recent requirements of scholarly communication emphasize the reproducibility of scientific claims. Text-based research papers are considered poor mediums to establish reproducibility. Papers must be accompanied by "research objects", aggregation of digital artifacts that together with the paper provide an authoritative record of a piece of research. We will present GeoTrust Hub (http://geotrusthub.org), a platform for creating, sharing, and reproducing reusable research objects. GeoTrust Hub provides tools for scientists to create `geounits'--reusable research objects. Geounits are self-contained, annotated, and versioned containers that describe and package computational experiments in an efficient and light-weight manner. Geounits can be shared on public repositories such as HydroShare and FigShare, and also using their respective APIs reproduced on provisioned clouds. The latter feature enables science applications to have a lifetime beyond sharing, wherein they can be independently verified and trust be established as they are repeatedly reused. Through research use cases from several geoscience laboratories across the United States, we will demonstrate how tools provided from GeoTrust Hub along with Hydroshare as its public repository for geounits is advancing the state of reproducible research in the geosciences. For each use case, we will address different computational reproducibility requirements. Our first use case will be an example of setup reproducibility which enables a scientist to set up and reproduce an output from a model with complex configuration and development environments. Our second use case will be an example of algorithm/data reproducibility, where in a shared data science model/dataset can be substituted with an alternate one to verify model output results, and finally an example of interactive reproducibility, in which an experiment is dependent on specific versions of data to produce the result. Toward this we will use software and data

Lightning NOx emissions over the USA constrained by TES ozone observations and the GEOS-Chem model

Science.gov (United States)

Jourdain, L.; Kulawik, S. S.; Worden, H. M.; Pickering, K. E.; Worden, J.; Thompson, A. M.

2010-01-01

Improved estimates of NOx from lightning sources are required to understand tropospheric NOx and ozone distributions, the oxidising capacity of the troposphere and corresponding feedbacks between chemistry and climate change. In this paper, we report new satellite ozone observations from the Tropospheric Emission Spectrometer (TES) instrument that can be used to test and constrain the parameterization of the lightning source of NOx in global models. Using the National Lightning Detection (NLDN) and the Long Range Lightning Detection Network (LRLDN) data as well as the HYPSLIT transport and dispersion model, we show that TES provides direct observations of ozone enhanced layers downwind of convective events over the USA in July 2006. We find that the GEOS-Chem global chemistry-transport model with a parameterization based on cloud top height, scaled regionally and monthly to OTD/LIS (Optical Transient Detector/Lightning Imaging Sensor) climatology, captures the ozone enhancements seen by TES. We show that the model's ability to reproduce the location of the enhancements is due to the fact that this model reproduces the pattern of the convective events occurrence on a daily basis during the summer of 2006 over the USA, even though it does not well represent the relative distribution of lightning intensities. However, this model with a value of 6 Tg N/yr for the lightning source (i.e.: with a mean production of 260 moles NO/Flash over the USA in summer) underestimates the intensities of the ozone enhancements seen by TES. By imposing a production of 520 moles NO/Flash for lightning occurring in midlatitudes, which better agrees with the values proposed by the most recent studies, we decrease the bias between TES and GEOS-Chem ozone over the USA in July 2006 by 40%. However, our conclusion on the strength of the lightning source of NOx is limited by the fact that the contribution from the stratosphere is underestimated in the GEOS-Chem simulations.

Update on the NASA GEOS-5 Aerosol Forecasting and Data Assimilation System

Science.gov (United States)

Colarco, Peter; da Silva, Arlindo; Aquila, Valentina; Bian, Huisheng; Buchard, Virginie; Castellanos, Patricia; Darmenov, Anton; Follette-Cook, Melanie; Govindaraju, Ravi; Keller, Christoph;

Design and implementation of location-based wireless targeted advertising

Science.gov (United States)

Li, Benjamin; Xu, Deyin

2001-10-01

As advertisements are time and location sensitive, a challenge for wireless marketing is to have advertisements delivered when and where they are most convenient. In this paper we introduce a two-stage auction model for location-based wireless targeted advertising. This system extends the notion of location-based service by using location information to target advertising, and does so specifically by enabling advertisers to specify their preferences and bid for advertisement delivery, where those preferences are then used in a subsequent automated auction of actual deliveries to wireless data users. The automated auction in the second stage is especially effective because it can use information about the individual user profile data, including customer relationship management system contents as well as location from the wireless system's location management service, including potentially location history such as current trajectory from recent history and longer-term historical trip records for that user. Through two-stage auction, real-time bidding by advertisers and matching ads contents to mobile users help advertising information reach maximal value.

Location-based Forwarding in Vehicular Networks

NARCIS (Netherlands)

Klein Wolterink, W.

2013-01-01

In this thesis we focus on location-based message forwarding in vehicular networks to support intelligent transportation systems (ITSs). ITSs are transport systems that utilise information and communication technologies to increase their level of automation, in this way levering the performance of

Geo-electric measurements – internal state of historic masonry

OpenAIRE

Schueremans, Luc

2009-01-01

A geophysical resistivity measuring device was modified to perform automatic monitoring of historical masonry structures before, during and after grout injection for consolidation purposes. The obtained image is called a geo-electrical tomography. The technique was used to evaluate the deteriorated masonry of the recently partly collapsed Maagdentoren in Zichem,(B). Geo-electric measuring techniques have been adapted from application in geology to be used as a non-destructive technique for t...

On geo-basis of river regulation——A case study for the middle reaches of the Yangtze River

Institute of Scientific and Technical Information of China (English)

2008-01-01

From the point of view that people have to obey the river’s geo-attributes in the river regulation, the definition and the meaning of the geo-attributes of a river are discussed. The geo-basis of the river regulation of the middle reaches of the Yangtze River is expounded in five aspects, including the structural geomorphology environment of flood storage and discharge, the distribution characteristics of subsidence and the sedimentation areas of Dongting Basin, the history evolution of Jianghan Basin, the function of Jianghan Basin and Dongting Basin as the flood water detention areas of Jingjiang River reach in ancient time, and the geological characteristic of Jingjiang River reach. Based on the geo-attributes of the middle reaches of the Yangtze River, some ideas about the middle reach regulation of the Yangtze River are put forward: to process the interchange between the lakes and diked marsh areas in Dongting Basin, to canal the new river route as the flood diversion channel of Jingjiang River reach with the paleo river, to recover the function of Jianghan Basin as flood detention area of the middle reaches. And we should take into consideration the geo-environment of the whole Yangtze River in the river regulation of middle reaches.

Geo-Hazards and Mountain Road Development in Nepal: Understanding the Science-Policy-Governance Interface

Science.gov (United States)

Dugar, Sumit; Dahal, Vaskar

2015-04-01

The foothills of Nepalese Himalayas located in the neotectonic mountain environment are among some of the most unstable and geomorphologically dynamic landscapes in the world. Young fold mountains in this region are characterized by complex tectonics that influence the occurrence of earthquakes, while climatic processes such as intense orographic rainfall often dictate the occurrence of floods and landslides. Development of linear infrastructures, such as roads, in mountainous terrain characterized by high relief and orogeny is considerably challenging where the complexity of landscape in steep and irregular topography, difficult ground conditions and weak geology, presents engineers and planners with numerous difficulties to construct and maintain mountain roads. Whilst application of engineering geology, geomorphic interpretation of terrain in terms of physiography and hydrology, and identification of geo-hazards along the road corridor is critical for long term operation of mountain roads, low-cost arterial roads in the Himalayan foothills generally fail to incorporate standard road slope engineering structures. This research provides unique insights on policy and governance issues in developing mountainous countries such as Nepal, where achieving a sound balance between sustainability and affordability is a major challenge for road construction. Road development in Nepal is a complex issue where socio-economic and political factors influence the budget allocation for road construction in rural hilly areas. Moreover, most mountain roads are constructed without any geological or geo-technical site investigations due to rampant corruption and lack of adequate engineering supervision. Despite having good examples of rural road construction practices such as the Dharan-Dhankuta Road in Eastern Nepal where comprehensive terrain-evaluation methods and geo-technical surveys led to an improved understanding of road construction, learnings from this project have not

GeoSciML version 3: A GML application for geologic information

Science.gov (United States)

International Union of Geological Sciences., I. C.; Richard, S. M.

2011-12-01

After 2 years of testing and development, XML schema for GeoSciML version 3 are now ready for application deployment. GeoSciML draws from many geoscience data modelling efforts to establish a common suite of feature types to represent information associated with geologic maps (materials, structures, and geologic units) and observations including structure data, samples, and chemical analyses. After extensive testing and use case analysis, in December 2008 the CGI Interoperability Working Group (IWG) released GeoSciML 2.0 as an application schema for basic geological information. GeoSciML 2.0 is in use to deliver geologic data by the OneGeology Europe portal, the Geological Survey of Canada Groundwater Information Network (wet GIN), and the Auscope Mineral Resources portal. GeoSciML to version 3.0 is updated to OGC Geography Markup Language v3.2, re-engineered patterns for association of element values with controlled vocabulary concepts, incorporation of ISO19156 Observation and Measurement constructs for representing numeric and categorical values and for representing analytical data, incorporation of EarthResourceML to represent mineral occurrences and mines, incorporation of the GeoTime model to represent GSSP and stratigraphic time scale, and refactoring of the GeoSciML namespace to follow emerging ISO practices for decoupling of dependencies between standardized namespaces. These changes will make it easier for data providers to link to standard vocabulary and registry services. The depth and breadth of GeoSciML remains largely unchanged, covering the representation of geologic units, earth materials and geologic structures. ISO19156 elements and patterns are used to represent sampling features such as boreholes and rock samples, as well as geochemical and geochronologic measurements. Geologic structures include shear displacement structures (brittle faults and ductile shears), contacts, folds, foliations, lineations and structures with no preferred

LPPS: A Distributed Cache Pushing Based K-Anonymity Location Privacy Preserving Scheme

Directory of Open Access Journals (Sweden)

Ming Chen

2016-01-01

Full Text Available Recent years have witnessed the rapid growth of location-based services (LBSs for mobile social network applications. To enable location-based services, mobile users are required to report their location information to the LBS servers and receive answers of location-based queries. Location privacy leak happens when such servers are compromised, which has been a primary concern for information security. To address this issue, we propose the Location Privacy Preservation Scheme (LPPS based on distributed cache pushing. Unlike existing solutions, LPPS deploys distributed cache proxies to cover users mostly visited locations and proactively push cache content to mobile users, which can reduce the risk of leaking users’ location information. The proposed LPPS includes three major process. First, we propose an algorithm to find the optimal deployment of proxies to cover popular locations. Second, we present cache strategies for location-based queries based on the Markov chain model and propose update and replacement strategies for cache content maintenance. Third, we introduce a privacy protection scheme which is proved to achieve k-anonymity guarantee for location-based services. Extensive experiments illustrate that the proposed LPPS achieves decent service coverage ratio and cache hit ratio with lower communication overhead compared to existing solutions.

Location-based activity adviser - a survey study

NARCIS (Netherlands)

Lin, Y.; Vries, de B.; Timmermans, H.J.P.

2009-01-01

The objective of the research is to explore the potential of a recommendation system that provides information and suggestions on physical activities based on the environment. We aim at employing location-based and mobile technologies to build an activity-adviser system and motivate users to change

GEO-6 project for Galileo data scientific utilization

Science.gov (United States)

Buresova, Dalia; Lastovicka, Jan; Boska, Josef; Sauli, Petra; Kouba, Daniel; Mosna, Zbysek

The future GNSS Galileo system offer a number of benefits (e.g. availability of better accuracy positioning, new frequencies bands allowing the implementation of specific techniques, provable time-stamp and location data using SIS authorisation, integrity, better support ad-hoc algorithms for data analysis and other service guarantee for liability and regulated applications) are widely spread among different disciplines. Also applications which are less interesting from the commercial and market point of view could successfully contribute to the numerous social benefits and support the innovation in the international research. The aim of the GEO-6 project "Scientific research Using GNSS" is to propose and broaden scientific utilization of future GNSS Galileo system data in research. It is a joint project of seven institutions from six countries led by the Atos Origin Company from Spain. The core of the project consists from six projects in five priority areas: PA-1 Remote sensing of the ocean using GNSS reflections, PA-2a Investigating GNSS ionospheric data assimilation, PA-2b 3-D gravity wave detection and determination (both PA-2a and PA-2b are ionospheric topics), PA-3 Demonstration of capability for operational forecasting of atmospheric delays, PA-4 GNSS seismometer, PA-5 Spacecraft formation flying using global navigation satellite systems. Institute of Atmospheric Physics, Prague, Czech Republic is responsible for the project PA-2b, where we developed and tested (to the extent allowed by available data) an algorithm and computer code for the 3-D detection of gravity waves and determination of their characteristics. The main drivers of the GEO-6 project are: high levels of accuracy even with the support of local elements, sharing of solutions and results for the worldwide scientific community. The paper will present basic description of the project with more details concerning Czech participation in it.

Introduction to Mobile Trajectory Based Services: A New Direction in Mobile Location Based Services

Science.gov (United States)

Khokhar, Sarfraz; Nilsson, Arne A.

The mandate of E911 gave birth to the idea of Location Based Services (LBS) capitalizing on the knowledge of the mobile location. The underlying estimated location is a feasible area. There is yet another class of mobile services that could be based on the mobility profiling of a mobile user. The mobility profile of a mobile user is a set of the routine trajectories of his or her travel paths. We called such services as Mobile Trajectory Based Services (MTBS). This paper introduces MTBS and functional architecture of an MTBS system. Suitability of different location estimation technologies for MTBS has been discussed and supported with simulation results.

Polymeric synthetic geo membranes in reservoirs waterproofing in the Kingdom of Morocco; Las geomembranas sinteticas polimericas en la impermeabilizacion de balsas en el Reino de Marruecos

Energy Technology Data Exchange (ETDEWEB)

Blanco Fernandez, M.

2015-07-01

This essay aims to address some of the aspects related to polymeric synthetic geo membranes that could be used in reservoirs of water located in the Kingdom of Morocco. In this regard, it offers a description of the two basic components geo membranes consist of, that is, resins and additives. It also gives an overview of the key pieces of legislation affecting such an issue. Furthermore, it stresses the paramount importance of implementing monitoring procedures in order to assess the condition of geo membranes over time and, if necessary, to proceed to provide for new waterproofing. Lastly, the characteristics of the process monitoring aforementioned are detailed in terms of tensile strength, elongation, tear resistance, dynamic impact, puncture resistance, low-temperature folding. Shore hardness, stress cracking, oxidation induction times, joint strength shear and peeling test, content and dispersion of carbon black and reflection-optical and scanning-electron microscopy. (Author)

UC Irvine CHRS Real-time Global Satellite Precipitation Monitoring System (G-WADI PERSIANN-CCS GeoServer) for Hydrometeorological Applications

Science.gov (United States)

Sorooshian, S.; Hsu, K. L.; Gao, X.; Imam, B.; Nguyen, P.; Braithwaite, D.; Logan, W. S.; Mishra, A.

2015-12-01

The G-WADI Precipitation Estimation from Remotely Sensed Information using Artificial Neural Networks-Cloud Classification System (PERSIANN-CCS) GeoServer has been successfully developed by the Center for Hydrometeorology and Remote Sensing (CHRS) at the University of California Irvine in collaboration with the UNESCO's International Hydrological Programme (IHP) and a number of its international centers. The system employs state-of-the-art technologies in remote sensing and artificial intelligence to estimate precipitation globally from satellite imagery in real-time and high spatiotemporal resolution (4km, hourly). It offers graphical tools and data service to help the user in emergency planning and management for natural disasters related to hydrological processes. The G-WADI PERSIANN-CCS GeoServer has been upgraded with new user-friendly functionalities. The precipitation data generated by the GeoServer is disseminated to the user community through support provided by ICIWaRM (The International Center for Integrated Water Resources Management), UNESCO and UC Irvine. Recently a number of new applications for mobile devices have been developed by our students. The RainMapper has been available on App Store and Google Play for the real-time PERSIANN-CCS observations. A global crowd sourced rainfall reporting system named iRain has also been developed to engage the public globally to provide qualitative information about real-time precipitation in their location which will be useful in improving the quality of the PERSIANN-CCS data. A number of recent examples of the application and use of the G-WADI PERSIANN-CCS GeoServer information will also be presented.

Minimizing the Power Consumption of Location-Based Services on Mobile Phones

DEFF Research Database (Denmark)

Kjærgaard, Mikkel Baun

2012-01-01

Location-based services have to pay careful attention to their power consumption in order not to drain the batteries of mobile phones. It is not a simple task to build low power location-based services that can run for hours because such services make heavy use of many power consuming features...... of mobile phones. In this article we discuss the power consumption of location-based services and mobile phone features, survey methods for how to minimize power consumption and summarize a number of design considerations for location-based service developers....

Ten Years Experience In Geo-Databases For Linear Facilities Risk Assessment (Lfra)

Science.gov (United States)

Oboni, F.

2003-04-01

Keywords: geo-environmental, database, ISO14000, management, decision-making, risk, pipelines, roads, railroads, loss control, SAR, hazard identification ABSTRACT: During the past decades, characterized by the development of the Risk Management (RM) culture, a variety of different RM models have been proposed by governmental agencies in various parts of the world. The most structured models appear to have originated in the field of environmental RM. These models are briefly reviewed in the first section of the paper focusing the attention on the difference between Hazard Management and Risk Management and the need to use databases in order to allow retrieval of specific information and effective updating. The core of the paper reviews a number of different RM approaches, based on extensions of geo-databases, specifically developed for linear facilities (LF) in transportation corridors since the early 90s in Switzerland, Italy, Canada, the US and South America. The applications are compared in terms of methodology, capabilities and resources necessary to their implementation. The paper then focuses the attention on the level of detail that applications and related data have to attain. Common pitfalls related to decision making based on hazards rather than on risks are discussed. The paper focuses the last sections on the description of the next generation of linear facility RA application, including examples of results and discussion of future methodological research. It is shown that geo-databases should be linked to loss control and accident reports in order to maximize their benefits. The links between RA and ISO 14000 (environmental management code) are explicitly considered.

Experimental study of geo-acoustic inversion uncertainty due to ocean sound-speed fluctuations.

NARCIS (Netherlands)

Siderius, M.; Nielsen, P.L.; Sellschopp, J.; Snellen, M.; Simons, D.G.

2001-01-01

Acoustic data measured in the ocean fluctuate due to the complex time-varying properties of the channel. When measured data are used for model-based, geo-acoustic inversion, how do acoustic fluctuations impact estimates for the seabed properties? In May 1999 SACLANT Undersea Research Center and

3D visualization of geo-scientific data for research and development purposes

International Nuclear Information System (INIS)

Mangeot, A.; Tabani, P.; Yven, B.; Dewonck, S.; Napier, B.; Waston, C.J.; Baker, G.R.; Shaw, R.P.

2012-01-01

Document available in extended abstract form only. In recent years national geoscience organizations have increasingly utilized 3D model data as an output to the stakeholder community. Advances in both software and hardware have led to an increasing use of 3D depictions of geoscience data alongside the standard 2D data formats such as maps and GIS data. By characterizing geoscience data in 3D, knowledge transfer between geo-scientists and stakeholders is improved as the mindset and thought processes are communicated more effectively in a 3D model than in a 2D flat file format. 3D models allow the user to understand the conceptual basis of the 2D data and aids the decision making process at local, regional and national scales. In April 29 2009 a Memorandum of Understanding has been signed between BGS and Andra in order to provide an improved mechanism for technical cooperation and collaboration in the Earth sciences. A specific agreement was signed the 1 December 2009 to evaluate the capacity of a 3D software called GeoVisionary to represent the Underground research Laboratory and its environment. GeoVisionary is the result of collaboration between Virtalis and the British Geological Survey. Combining a powerful data engine with a virtual geological tool-kit enables geo-scientists to visualize, analyze and share large datasets seamlessly in an immersive, real time environment A typical GeoVisionary environment contains one or more the following: 3D terrain files, Aerial photography, Bitmap overlays of specialized data, Vector shapes and outlines, 3D object Models. The key benefits are: Continuously stream geometry and photography in real time, Visualise 2D GIS data in immersive 3D stereo, Diverse datasets in a single environment, 'Fly' to any part of the data in seconds, Infinitely scalable, Prepare and evaluate before you begin fieldwork, Enhance team-working and increased efficiency of field operations, Clearer communication of results. Now, the 3D model has been

Akzeptanz von Location Based Services

OpenAIRE

Bauer, Hans H.; Haber, Tobias E.; Reichardt, Tina; Bökamp, Marten

2006-01-01

Die enormen Investitionen in UMTS-Lizenzen und den Aufbau einer neuen Netzinfrastruktur zwingen die Mobilfunkanbieter zur Erschließung neuer Umsatzpotenziale. Durch Entwicklung neuer mobiler Mehrwertdienste hoffen sie, die „Killerapplikation“ der 3. Mobilfunkgeneration zu finden, die ähnlich wie der Short Message Service (SMS) für GSM, zum Treiber des UMTS-Markterfolges werden kann. Nach Meinung vieler Marktbeobachter könnten Location Based Services, d.h. mobile Dienste, die ...

Canada's Deep Geological Repository for Used Nuclear Fuel - Geo-scientific Site Evaluation Process - 13117

Energy Technology Data Exchange (ETDEWEB)

Blyth, Alec; Ben Belfadhel, Mahrez; Hirschorn, Sarah; Hamilton, Duncan; McKelvie, Jennifer [Nuclear Waste Management Organization, 22 St. Clair Avenue East, Toronto, Ontario M4T 2S3 (Canada)

2013-07-01

The Nuclear Waste Management Organization (NWMO) is responsible for implementing Adaptive Phased Management (APM), the approach selected by the Government of Canada for long-term management of used nuclear fuel generated by Canadian nuclear reactors. The ultimate objective of APM is the centralized containment and isolation of Canada's used nuclear fuel in a Deep Geological Repository in a suitable rock formation at a depth of approximately 500 meters (m) (1,640 feet [ft]). In May 2010, the NWMO published a nine-step site selection process that serves as the road map to decision-making on the location for the deep geological repository. The safety and appropriateness of any potential site will be assessed against a number of factors, both technical and social in nature. The selected site will be one that can be demonstrated to be able to safely contain and isolate used nuclear fuel, protecting humans and the environment over the very long term. The geo-scientific suitability of potential candidate sites will be assessed in a stepwise manner following a progressive and thorough site evaluation process that addresses a series of geo-scientific factors revolving around five safety functions. The geo-scientific site evaluation process includes: Initial Screenings; Preliminary Assessments; and Detailed Site Evaluations. As of November 2012, 22 communities have entered the site selection process (three in northern Saskatchewan and 18 in northwestern and southwestern Ontario). (authors)

Designing human centered GeoVisualization application--the SanaViz--for telehealth users: a case study.

Science.gov (United States)

Joshi, Ashish; de Araujo Novaes, Magdala; Machiavelli, Josiane; Iyengar, Sriram; Vogler, Robert; Johnson, Craig; Zhang, Jiajie; Hsu, Chiehwen E

2012-01-01

Public health data is typically organized by geospatial unit. GeoVisualization (GeoVis) allows users to see information visually on a map. Examine telehealth users' perceptions towards existing public health GeoVis applications and obtains users' feedback about features important for the design and development of Human Centered GeoVis application "the SanaViz". We employed a cross sectional study design using mixed methods approach for this pilot study. Twenty users involved with the NUTES telehealth center at Federal University of Pernambuco (UFPE), Recife, Brazil were enrolled. Open and closed ended questionnaires were used to gather data. We performed audio recording for the interviews. Information gathered included socio-demographics, prior spatial skills and perception towards use of GeoVis to evaluate telehealth services. Card sorting and sketching methods were employed. Univariate analysis was performed for the continuous and categorical variables. Qualitative analysis was performed for open ended questions. Existing Public Health GeoVis applications were difficult to use. Results found interaction features zooming, linking and brushing and representation features Google maps, tables and bar chart as most preferred GeoVis features. Early involvement of users is essential to identify features necessary to be part of the human centered GeoVis application "the SanaViz".

Gamifying Navigation in Location-Based Applications

DEFF Research Database (Denmark)

Nadarajah, Stephanie Githa; Overgaard, Benjamin Nicholas; Pedersen, Peder Walz

2017-01-01

Location-based games entertain players usually by interactions at points of interest (POIs). Navigation between POIs often involve the use of either a physical or digital map, not taking advantage of the opportunity available to engage users in activities between POIs. The paper presents riddle s...

The Intention to Use GeoGebra in the Teaching of Mathematics among Malaysian Teachers

Science.gov (United States)

Belgheis, Soheila; Kamalludeen, Rosemaliza

2018-01-01

This quantitative study examined Malaysian teachers' perception towards using GeoGebra in mathematics teaching. The relationship between teachers' Perceived Current Competencies (PCC) of GeoGebra, and Intention to Use (IU) it as well as the difference between male and female teachers and between users and non-users of GeoGebra were investigated.…

Exploring the Convergence of Sequences in the Embodied World Using GeoGebra

Science.gov (United States)

de Moura Fonseca, Daila Silva Seabra; de Oliveira Lino Franchi, Regina Helena

2016-01-01

This study addresses the embodied approach of convergence of numerical sequences using the GeoGebra software. We discuss activities that were applied in regular calculus classes, as a part of a research which used a qualitative methodology and aimed to identify contributions of the development of activities based on the embodiment of concepts,…

Air Quality Forecasts Using the NASA GEOS Model

Science.gov (United States)

Keller, Christoph A.; Knowland, K. Emma; Nielsen, Jon E.; Orbe, Clara; Ott, Lesley; Pawson, Steven; Saunders, Emily; Duncan, Bryan; Follette-Cook, Melanie; Liu, Junhua;

Fundamental Limitations for Imaging GEO Satellites

Science.gov (United States)

2015-10-18

Fundamental limitations for imaging GEO satellites D. Mozurkewich Seabrook Engineering , Seabrook, MD 20706 USA H. R. Schmitt, J. T. Armstrong Naval...higher spatial frequency. Send correspondence to David Mozurkewich, Seabrook Engineering , 9310 Dubarry Ave., Seabrook MD 20706 E-mail: dave

Blocking of Goal-Location Learning Based on Shape

Science.gov (United States)

Alexander, Tim; Wilson, Stuart P.; Wilson, Paul N.

2009-01-01

Using desktop, computer-simulated virtual environments (VEs), the authors conducted 5 experiments to investigate blocking of learning about a goal location based on Shape B as a consequence of preliminary training to locate that goal using Shape A. The shapes were large 2-dimensional horizontal figures on the ground. Blocking of spatial learning…

Investigating the effects of location-based advertising in the supermarket : does goal congruence trump location congruence?

NARCIS (Netherlands)

van 't Riet, J.J.; Hühn, A.; Ketelaar, P.; Khan, J.; König, R.; Rozendaal, E.; Markopoulos, P.

2016-01-01

Advertising professionals have great expectations for location-based advertising (LBA). The present study therefore set out to investigate whether ads that are tailored to consumers' location are indeed more effective than ads that are not. In addition, it was investigated whether LBA is

Influence of ZnO encapsulation on the luminescence property of GeO2 nanowires

International Nuclear Information System (INIS)

Kim, Hyunsu; Jin, Changhyun; Park, Sunghoon; Lee, Chongmu; Kwon, Youngjae; Lee, Sangmin

2012-01-01

GeO 2 -core/ZnO-shell nanowires were synthesized on (100) Si substrates by thermal evaporation of Ge powders, followed by atomic layer deposition of ZnO. X-ray diffraction, scanning electron microscopy and transmission electron microscopy analyses showed that the mean diameter and lengths of the core-shell nanowires were approximately 100 nm and from a few tens to a few hundreds of micrometers, respectively. Photoluminescence measurements showed that pure GeO 2 nanowires had a violet emission band centered at approximately 430 nm. In contrast, GeO 2 -core/ZnO-shell nanowires had both a sharp near-band edge (NBE) emission band centered at approximately 380 nm and a broad deep-level (DL) emission band centered at approximately 590 nm, which is characteristic of ZnO. GeO 2 -core/ZnO-shell nanowires showed a higher intensity ratio of NBE emission to DL emission than either GeO 2 or ZnO nanowires. In addition, the origin of the enhancement of luminescence in GeO 2 nanowires by ZnO encapsulation is discussed.

3D Geo: An Alternative Approach

Science.gov (United States)

Georgopoulos, A.

2016-10-01

The expression GEO is mostly used to denote relation to the earth. However it should not be confined to what is related to the earth's surface, as other objects also need three dimensional representation and documentation, like cultural heritage objects. They include both tangible and intangible ones. In this paper the 3D data acquisition and 3D modelling of cultural heritage assets are briefly described and their significance is also highlighted. Moreover the organization of such information, related to monuments and artefacts, into relational data bases and its use for various purposes, other than just geometric documentation is also described and presented. In order to help the reader understand the above, several characteristic examples are presented and their methodology explained and their results evaluated.

Constructions, geo-materials and interactions

International Nuclear Information System (INIS)

Petit, C.; Pijaudier-Cabot, G.; Reynouard, J.M.

1998-01-01

The development of methods for the evaluation of the functioning safety of buildings and structures during all their service life represents one of the major research goals in civil engineering. The energy production, the industrial development and the management of wastes have led to new safety research problems to ensure the environment and populations protection. The mechanics of geo-materials (soils, concretes, rocks) is the central part of the predictive tools developed to satisfy these socio-economical stakes. The functioning analysis of buildings cover huge size and time scales, from the micro-meter to the kilometer and from the second to the century, and requires various relevant models and multi-subject methods. This volume is divided in 3 parts dealing with: the in-service safety of buildings, the accidental situations, and the behaviour of geo-materials. Five papers dealing with the long-term, seismic and thermal behaviour of concretes were selected for INIS and one paper dealing with the effect of time on a natural clay and on the behaviour of a dam foundations was selected for ETDE. (J.S.)

Location-Based Services, Final Report

OpenAIRE

Goodchild, Michael F.

2001-01-01

In December, 2001 the Center for Spatially Integrated Social Science (CSISS; http://csiss.org) and the University Consortium for Geographic Information Science (UCGIS; http://www.ucgis.org) held a specialist meeting to explore location-based services, and their implications and significance for the social sciences and for geographic information science. There are a number of reasons for believing that LBS will have significant impact on the social sciences, stemming from three basic arguments...

Experimental Study on Rise Husk Ash & Fly Ash Based Geo-Polymer Concrete Using M-Sand

Science.gov (United States)

Nanda Kishore, G.; Gayathri, B.

2017-08-01

Serious environmental problems by means of increasing the production of Ordinary Portland cement (OPC), which is conventionally used as the primary binder to produce cement concrete. An attempt has been made to reduce the use of ordinary Portland cement in cement concrete. There is no standard mix design of geo-polymer concrete, an effort has been made to know the physical, chemical properties and optimum mix of geo-polymer concrete mix design. Concrete cubes of 100 x 100 x 100 mm were prepared and cured under steam curing for about 24 hours at temperature range of 40°C to 60°C. Fly ash is replaced partially with rice husk ash at percentage of 10%, 15% and 25%. Sodium hydroxide and sodium silicate are of used as alkaline activators with 5 Molar and 10 Molar NaOH solutions. Natural sand is replaced with manufacture sand. Test results were compared with controlled concrete mix of grade M30. The results shows that as the percentage of rice husk ash and water content increases, compressive strength will be decreases and as molarity of the alkaline solution increases, strength will be increases.

Advances and Directions for the Intelligent Systems for Geosciences Research Community: Updates and Opportunities from the NSF EarthCube IS-GEO RCN

Science.gov (United States)

Pierce, S. A.

2017-12-01

The Earthcube Intelligent Systems for Geosciences Research Collaboration Network (IS-GEO RCN) represents an emerging community of interdisciplinary researchers aiming to create fundamental new capabilities for understanding Earth systems. Collaborative efforts across IS-GEO fields of study offer opportunities to accelerate scientific discovery and understanding. The IS-GEO community has an active membership of approximately 65 researchers and includes researchers from across the US, international members, and an early career committee. Current working groups are open to new participants and are focused on four thematic areas with regular coordination meetings and upcoming sessions at professional conferences. (1) The Sensor-based data Collection and Integration Working group looks at techniques for analyzing and integrating of information from heterogeneous sources, with a possible application for early warning systems. (2) The Geoscience Case Studies Working group is creating benchmark data sets to enable new collaborations between geoscientists and data scientists. (3) The Geo-Simulations Working group is evaluating the state of the art in practices for parametrizations, scales, and model integration. (4) The Education Working group is gathering, organizing and collecting all the materials from the different IS-GEO courses. Innovative IS-GEO applications will help researchers overcome common challenges while will redefining the frontiers of discovery across fields and disciplines. (Visit IS-GEO.org for more information or to sign up for any of the working groups.)

Call Duration Characteristics based on Customers Location

Directory of Open Access Journals (Sweden)

Žvinys Karolis

2014-05-01

Full Text Available Nowadays a lot of different researches are performed based on call duration distributions (CDD analysis. However, the majority of studies are linked with social relationships between the people. Therefore the scarcity of information, how the call duration is associated with a user's location, is appreciable. The goal of this paper is to reveal the ties between user's voice call duration and the location of call. For this reason we analyzed more than 5 million calls from real mobile network, which were made over the base stations located in rural areas, roads, small towns, business and entertainment centers, residential districts. According to these site types CDD’s and characteristic features for call durations are given and discussed. Submitted analysis presents the users habits and behavior as a group (not an individual. The research showed that CDD’s of customers being them in different locations are not equal. It has been found that users at entertainment, business centers are tend to talk much shortly, than people being at home. Even more CDD can be distorted strongly, when machinery calls are evaluated. Hence to apply a common CDD for a whole network it is not recommended. The study also deals with specific parameters of call duration for distinguished user groups, the influence of network technology for call duration is considered.

In-route skyline querying for location-based services

DEFF Research Database (Denmark)

Xuegang, Huang; Jensen, Kristian S.

2005-01-01

With the emergence of an infrastructure for location-aware mobile services, the processing of advanced, location-based queries that are expected to underlie such services is gaining in relevance, While much work has assumed that users move in Euclidean space, this paper assumes that movement...... their efficient computation. The queries take into account several spatial preferences. and they intuitively return a set of most interesting results for each result returned by the corresponding non-skyline queries. The paper also covers a performance study of the proposed techniques based on real point...

Social sensing of urban land use based on analysis of Twitter users' mobility patterns.

Science.gov (United States)

Soliman, Aiman; Soltani, Kiumars; Yin, Junjun; Padmanabhan, Anand; Wang, Shaowen

2017-01-01

A number of recent studies showed that digital footprints around built environments, such as geo-located tweets, are promising data sources for characterizing urban land use. However, challenges for achieving this purpose exist due to the volume and unstructured nature of geo-located social media. Previous studies focused on analyzing Twitter data collectively resulting in coarse resolution maps of urban land use. We argue that the complex spatial structure of a large collection of tweets, when viewed through the lens of individual-level human mobility patterns, can be simplified to a series of key locations for each user, which could be used to characterize urban land use at a higher spatial resolution. Contingent issues that could affect our approach, such as Twitter users' biases and tendencies at locations where they tweet the most, were systematically investigated using 39 million geo-located Tweets and two independent datasets of the City of Chicago: 1) travel survey and 2) parcel-level land use map. Our results support that the majority of Twitter users show a preferential return, where their digital traces are clustered around a few key locations. However, we did not find a general relation among users between the ranks of locations for an individual-based on the density of tweets-and their land use types. On the contrary, temporal patterns of tweeting at key locations were found to be coherent among the majority of users and significantly associated with land use types of these locations. Furthermore, we used these temporal patterns to classify key locations into generic land use types with an overall classification accuracy of 0.78. The contribution of our research is twofold: a novel approach to resolving land use types at a higher resolution, and in-depth understanding of Twitter users' location-related and temporal biases, promising to benefit human mobility and urban studies in general.

Social sensing of urban land use based on analysis of Twitter users’ mobility patterns

Science.gov (United States)

Soltani, Kiumars; Yin, Junjun; Padmanabhan, Anand; Wang, Shaowen

2017-01-01

A number of recent studies showed that digital footprints around built environments, such as geo-located tweets, are promising data sources for characterizing urban land use. However, challenges for achieving this purpose exist due to the volume and unstructured nature of geo-located social media. Previous studies focused on analyzing Twitter data collectively resulting in coarse resolution maps of urban land use. We argue that the complex spatial structure of a large collection of tweets, when viewed through the lens of individual-level human mobility patterns, can be simplified to a series of key locations for each user, which could be used to characterize urban land use at a higher spatial resolution. Contingent issues that could affect our approach, such as Twitter users’ biases and tendencies at locations where they tweet the most, were systematically investigated using 39 million geo-located Tweets and two independent datasets of the City of Chicago: 1) travel survey and 2) parcel-level land use map. Our results support that the majority of Twitter users show a preferential return, where their digital traces are clustered around a few key locations. However, we did not find a general relation among users between the ranks of locations for an individual—based on the density of tweets—and their land use types. On the contrary, temporal patterns of tweeting at key locations were found to be coherent among the majority of users and significantly associated with land use types of these locations. Furthermore, we used these temporal patterns to classify key locations into generic land use types with an overall classification accuracy of 0.78. The contribution of our research is twofold: a novel approach to resolving land use types at a higher resolution, and in-depth understanding of Twitter users’ location-related and temporal biases, promising to benefit human mobility and urban studies in general. PMID:28723936

Location based chat application for iPhone

Science.gov (United States)

Rana, Pradeep

With the increasing use of mobile devices everywhere in the world, there is a lack of social interaction between people. The objective of this thesis project is to create a location based chat application, which will help users to interact with other people around them. It will provide an opportunity to meet people when someone visits a new place. The app will use GPS coordinates of the user and will show him a list of other users based on his location. The user can then choose any of the other users from the list and start chatting with them. This app will consist of a frontend and backend. The frontend will be an iOS application and the backend will be a PHP/MYSQL server.

Teaching helix and problems connected with helix using GeoGebra

Science.gov (United States)

Bímová, Daniela

2017-12-01

The contribution presents the dynamic applets created in GeoGebra that show the origin and main properties of a helix and it also presents some constructive problems connected with the helix. There are created the step by step algorithms of some constructions in the chosen applets. Three-dimensional applets include illustrative helix samples and spatial animations that help students better see problems concerning the helix spatially. There is mentioned the website in the contribution on which there is situated GeoGebra book dedicated to the topic "Helix" and containing the mentioned applets. The created applets and materials of the GeoGebra book "Helix" help in teaching and studying the course Constructive Geometry determined for the students of the Faculty of Mechanical Engineering of the Technical University of Liberec.

Model driven geo-information systems development

NARCIS (Netherlands)

Morales Guarin, J.M.; Ferreira Pires, Luis; van Sinderen, Marten J.; Williams, A.D.

Continuous change of user requirements has become a constant for geo-information systems. Designing systems that can adapt to such changes requires an appropriate design methodology that supports abstraction, modularity and other mechanisms to capture the essence of the system and help controlling

GeoTemp™ 1.0: A MATLAB-based program for the processing, interpretation and modelling of geological formation temperature measurements

Science.gov (United States)

Ricard, Ludovic P.; Chanu, Jean-Baptiste

2013-08-01

The evaluation of potential and resources during geothermal exploration requires accurate and consistent temperature characterization and modelling of the sub-surface. Existing interpretation and modelling approaches of 1D temperature measurements are mainly focusing on vertical heat conduction with only few approaches that deals with advective heat transport. Thermal regimes are strongly correlated to rock and fluid properties. Currently, no consensus exists for the identification of the thermal regime and the analysis of such dataset. We developed a new framework allowing the identification of thermal regimes by rock formations, the analysis and modelling of wireline logging and discrete temperature measurements by taking into account the geological, geophysical and petrophysics data. This framework has been implemented in the GeoTemp software package that allows the complete thermal characterization and modelling at the formation scale and that provides a set of standard tools for the processing wireline and discrete temperature data. GeoTempTM operates via a user friendly graphical interface written in Matlab that allows semi-automatic calculation, display and export of the results. Output results can be exported as Microsoft Excel spreadsheets or vector graphics of publication quality. GeoTemp™ is illustrated here with an example geothermal application from Western Australia and can be used for academic, teaching and professional purposes.

Geo-risk in Central Africa: integrating multi-hazards and vulnerability to support risk management

Science.gov (United States)

Kervyn, Francois; Nicolas, d'Oreye; Haventith, Hans-Balder; Kervyn, Matthieu; Caroline, Michellier; Trefon, Theodore; Wolff, Eleonore

2013-04-01