WorldWideScience

Sample records for generic slung load

  1. Modeling of Generic Slung Load System

    DEFF Research Database (Denmark)

    Bisgaard, Morten; Bendtsen, Jan Dimon; la Cour-Harbo, Anders

    2009-01-01

    This paper presents the result of the modelling and verification of a generic slung load system using a small-scale helicopter. The model is intended for use in simulation, pilot training, estimation, and control. The model is derived using a redundant coordinate formulation based on Gauss...... slackening and tightening as well as aerodynamic coupling between the helicopter and the load. Furthermore, it is shown how the model can be easily used for multi-lift systems either with multiple helicopters or multiple loads. A numerical stabilisation algorithm is introduced and finally the use...... of the model is illustrated through simulations and flight verifications.  ...

  2. Modelling of Generic Slung Load System

    DEFF Research Database (Denmark)

    Bisgaard, Morten; Bendtsen, Jan Dimon; La Cour-Harbo, Anders

    2006-01-01

    of Least Constraint using the Udwadia-Kalaba equation and can be used to model all body to body slung load suspension types. The model gives an intuitive and easy-to-use way of modelling and simulating di erent slung load suspension types and it includes detection and response of wire slacking...

  3. Swing Damping for Helicopter Slung Load Systems using Delayed Feedback

    OpenAIRE

    Bisgaard, Morten; la Cour-Harbo, Anders; Bendtsen, Jan Dimon

    2009-01-01

    This paper presents the design and verification of a swing reducing controller for helicopter slung load systems usingintentional delayed feedback. It is intended for augmenting a trajectory tracking helicopter controller and thereby improving the slung load handing capabilities for autonomous helicopters. The delayed feedback controller is added to actively reduce oscillations of the slung load by improving the damping of the slung load pendulum modes. Furthermore, it is intended for integra...

  4. Full State Estimation for Helicopter Slung Load System

    DEFF Research Database (Denmark)

    Bisgaard, Morten; la Cour-Harbo, Anders; Bendtsen, Jan Dimon

    This paper presents the design of a state estimator system for a generic helicopter based slung load system. The estimator is designed to deliver full rigid body state information for both helicopter and load and is based on the unscented Kalman filter. Two different approaches are investigated......: One based on a parameter free kinematic model and one based on a full aerodynamic helicopter and slung load model. The kinematic model approach uses acceleration and rate information from two Inertial Measurement Units, one on the helicopter and one on the load, to drive a simple kinematic model....... A simple and effective virtual sensor method is developed to maintain the constraints imposed by the wires in the system. The full model based approach uses a complex aerodynamical model to describe the helicopter together with a generic rigid body model. This rigid body model is based on a redundant...

  5. Full State Estimation for Helicopter Slung Load System

    DEFF Research Database (Denmark)

    Bisgaard, Morten; la Cour-Harbo, Anders; Bendtsen, Jan Dimon

    2007-01-01

    This paper presents the design of a state estimator system for a generic helicopter based slung load system. The estimator is designed to deliver full rigid body state information for both helicopter and load and is based on the unscented Kalman filter. Two different approaches are investigated......: One based on a parameter free kinematic model and one based on a full aerodynamic helicopter and slung load model. The kinematic model approach uses acceleration and rate information from two Inertial Measurement Units, one on the helicopter and one on the load, to drive a simple kinematic model....... A simple and effective virtual sensor method is developed to maintain the constraints imposed by the wires in the system. The full model based approach uses a complex aerodynamical model to describe the helicopter together with a generic rigid body model. This rigid body model is based on a redundant...

  6. Adaptive Control System for Autonomous Helicopter Slung Load Operations

    DEFF Research Database (Denmark)

    Bisgaard, Morten; la Cour-Harbo, Anders; Bendtsen, Jan Dimon

    2010-01-01

    system on the helicopter that measures the position of the slung load. The controller is a combined feedforward and feedback scheme for simultaneous avoidance of swing excitation and active swing damping. Simulations and laboratory flight tests show the effectiveness of the combined control system......This paper presents design and verification of an estimation and control system for a helicopter slung load system. The estimator provides position and velocity estimates of the slung load and is designed to augment existing navigation in autonomous helicopters. Sensor input is provided by a vision......, yielding significant load swing reduction compared to the baseline controller....

  7. Input Shaping for Helicopter Slung Load Swing Reduction

    DEFF Research Database (Denmark)

    Bisgaard, Morten; la Cour-Harbo, Anders; Bendtsen, Jan Dimon

    2008-01-01

    This chapter presents a feedforward swing reducing control system for augmenting already existing helicopter controllers and enables slung load flight with autonomous helicopters general cargo transport. The feedforward controller is designed to avoid excitation of the lightly damped modes...

  8. Swing Damping for Helicopter Slung Load Systems using Delayed Feedback

    DEFF Research Database (Denmark)

    Bisgaard, Morten; la Cour-Harbo, Anders; Bendtsen, Jan Dimon

    2009-01-01

    of swing. The design of the delayed feedback controller is presented as an optimization problem which gives the possibility of an automated design process. Simulations and flight test verifications of the control system on two different autonomous helicopters are presented and it is shown how a significant......This paper presents the design and verification of a swing reducing controller for helicopter slung load systems using intentional delayed feedback. It is intended for augmenting a trajectory tracking helicopter controller and thereby improving the slung load handing capabilities for autonomous...... helicopters. The delayed feedback controller is added to actively reduce oscillations of the slung load by improving the damping of the slung load pendulum modes. Furthermore, it is intended for integration with a feedforward control scheme based on input shaping for concurrent avoidance and dampening...

  9. Modeling, Estimation, and Control of Helicopter Slung Load System

    DEFF Research Database (Denmark)

    Bisgaard, Morten

    and simulating different slung load suspension types. It further includes detection and response to wire slacking and tightening, it models the aerodynamic coupling between the helicopter and the load, and can be used for multilift systems with any combination of multiple helicopters and multiple loads...

  10. Vision Aided State Estimation for Helicopter Slung Load System

    DEFF Research Database (Denmark)

    Bisgaard, Morten; Bendtsen, Jan Dimon; la Cour-Harbo, Anders

    2007-01-01

    This paper presents the design and verification of a state estimator for a helicopter based slung load system. The estimator is designed to augment the IMU driven estimator found in many helicopter UAV s and uses vision based updates only. The process model used for the estimator is a simple 4...

  11. Testing-Based Approach to Determining the Divergence Speed of Slung Loads

    Directory of Open Access Journals (Sweden)

    Narayanan Komerath

    2018-02-01

    Full Text Available When a rotorcraft carries an external slung load, flight speed is often limited by the fear of divergent oscillations, rather than vehicle performance. Since slung objects can be of any shape, incorporating the aerodynamics with sufficient accuracy to predict safe speed has been a problem. The uncertainty forces certifying authorities to set conservative limits on speed to avoid divergence. Obtaining the aerodynamic coefficients of bluff bodies was excessively time-consuming in experiments, and impractical in computations. This review traces the evolution of progress in the area. Prior thinking was to use computations for prediction, with the computational codes validated using a few samples of experiments. This approach has not led to valid general predictions. Data were sparse and a-priori predictions were rarer. A continuous rotation approach has enabled swift measurements of 6-degrees-of-freedom aerodynamic load maps with high resolution about several axes of rotation. The resulting knowledge base in turn permits a swift determination of dynamics up to divergence, with wind tunnel tests where necessary to fill interpolation gaps in the knowledge base. The essence of efficient and swift dynamics simulation with a few well-tested assumptions is described. Under many relevant conditions, the vehicle flight dynamics can be safely decoupled from those of the slung load. While rotor wake swirl causes the payload to rotate at liftoff and landing, this effect can be incorporated into the simulation. Recent success in explaining two well-documented flight test cases provides strong evidence that predictions can be made for most missions swiftly.

  12. Mark II containment program load evaluation and acceptance criteria; Generic Technical Activity A-8

    International Nuclear Information System (INIS)

    Anderson, C.J.

    1981-08-01

    The report provides a discussion of LOCA-related suppression pool hydrodynamic loads in boiling water reactor (BWR) facilities with the Mark II pressure-suppression containment design. This report concludes NRC Generic Technical Activity A-8, 'Mark II Containment Pool Dynamic Loads,' which has been designated an 'Unresolved Safety Issue' pursuant to Section 210 of the Energy Reorganization Act of 1974

  13. Mark III LOCA-related hydrodynamic load definition. Generic technical activity B-10. Final report

    International Nuclear Information System (INIS)

    Fields, M.B.; Kudrick, J.A.

    1984-08-01

    This report, prepared by the staff of the Office of Nuclear Reactor Regulation and its consultants at the Brookhaven National Laboratory, provides a discussion of LOCA-related suppression pool hydrodynamic loads in boiling water reactor (BWR) facilities with the Mark III pressure-suppression containment design. Its issuance completes NRC Generic Technical Activity B-10, Behavior of BWR Mark III Containment. On the basis of certain large-scale tests conducted between 1973 and 1979, the General Electric Company developed LOCA-related hydrodynamic load definitions for use in the design of the standard Mark III containment. The staff and its consultants have reviewed these load definitions and their bases and conclude that, with a few specified changes, the proposed load definitions provide conservative loading conditions. The staff approved acceptance criteria for LOCA-related hydrodynamic loads are provided in an appendix

  14. Mark III LOCA-related hydrodynamic load definition. Generic technical activity B-10

    International Nuclear Information System (INIS)

    1984-02-01

    This report, prepared by the staff of the Office of Nuclear Reactor Regulation and its consultants at the Brookhaven National Laboratory, provides a discussion of LOCA-related suppression pool hydrodynamic loads in boiling water reactor (BWR) facilities with the Mark III pressure-suppression containment design. Its issuance completes NRC Generic Technical Activity B-10, Behavior of BWR Mark III Containment. On the basis of certain large-scale tests conducted between 1973 and 1979, the General Electric Company developed LOCA-related hydrodynamic load definitions for use in the design of the standard Mark III containment. The staff and its consultants have reviewed these load definitions and their bases conclude that, with a few specified changes, the proposed load definitions provide conservative loading conditions. The staff-approved acceptance criteria for LOCA-related hydrodynamic loads are provided in Appendix C of this report

  15. Control of heavy loads at nuclear power plants: Resolution of Generic Technical Activity A-36. Technical report

    International Nuclear Information System (INIS)

    George, H.J.

    1980-07-01

    This report summarizes work performed by the NRC staff in the resolution of Generic Technical Activity A-36, Control of Heavy Loads Near Spent Fuel. Generic Technical Activity A-36 is one of the generic technical subjects designated as unresolved safety issues pursuant to Section 210 of the Energy Reorganization Act of 1974. The report describes the technical studies and evaluations performed by the NRC staff, the staff's guidelines based on these studies, and the staff's plans for implementaton of its technical guidelines

  16. A generic approach for containment success criteria under severe accident loads

    International Nuclear Information System (INIS)

    Sammataro, R.F.; Solonick, W.R.; Edwards, N.W.

    1992-01-01

    The U.S. Department of Energy (DOE), Office of New Production Reactors (NP), has identified safety as the foremost design criterion for the Heavy Water New Production Reactor (NPR-HWR). The DOE-NP has issued the Deterministic Severe Accident Criteria (DSACs) to guide the design of the NPR-HWR containment for resistance to severe accidents. The DSAC concept provides for a generic approach for success criteria to predict the threshold of containment failure under severe accident loads. This concept consists of two parts: (1) Problem Statements that are qualitative and quantitative bases for calculating associated loadings and containment response to those loadings, and (2) Success Criteria that specify acceptable containment response measures and limits for each problem statement. This paper is limited to a discussion of a generic approach for containment success criteria. The main elements of these success criteria are expressed in terms of elastic stresses and inelastic strains. Containment performance is based on the best estimate of failure as predicted by either stress or strain, buckling, displacements, or ability to withstand missile perforation. Since these limits are best estimates of failure, no conservatism exists in these success criteria. Rather, conservatism is to be provided in the problem statements, i.e., the quantified severe accident loads. These success criteria are presented on a multi-tiered basis for static pressure and temperature loadings, dynamic loadings, and missiles. Within the static pressure and temperature loadings and the dynamic loadings, the criteria are separated into elastic analysis success criteria and inelastic analysis success criteria. Each of these areas, in turn, defines limits on either the stress or strain measures as well as on measures for buckling and displacements

  17. A generic approach for steel containment vessel success criteria for severe accident loads

    International Nuclear Information System (INIS)

    Sammataro, R.F.; Solonick, W.R.; Edwards, N.W.

    1993-01-01

    Safety has been defined as the foremost design criterion for the Heavy Water New Production Reactor (NPR-HWR) by the U.S. DOE, Office of New Production Reactors (NP). The DOE-NP issued the Deterministic Severe Accident Criteria (DSAC) concept to guide the design of the NPR-HWR containment for resistance to severe accidents. The DSAC concept provides for a generic approach for containment vessel success criteria to predict the threshold of containment failure under severe accident loads. This concept consists of two parts: (1) Problem Statements and (2) Success Criteria. The paper is limited to a discussion of a success criteria. These criteria define acceptable containment response measures and limits for each problem statement. The criteria are based on the 'best estimate' of failure with no conservatism. Rather, conservatism, if required, is to be provided in the problem statements prepared by the designer and/or the regulatory authorities. The success criteria are presented on a multi-tiered basis for static pressure and temperature loadings, dynamic loadings, and missiles that may impact the containment. Within the static pressure and temperature loadings and the dynamic loadings, the criteria are separated into elastic analysis success criteria and inelastic analysis success criteria. Each of these areas, in turn, defines limits on either the stress or strain measures as well as on measures for buckling and displacements. The rationale upon which these criteria are based is contained in referenced documents. Rigorous validation of the criteria by comparison with results from analytical or experimental programs and application of the criteria to a containment design remain as future tasks. (orig./HP)

  18. Development of generic floor response spectra for equipment qualification for seismic loads

    International Nuclear Information System (INIS)

    Curren, J.R.; Costantino, C.J.

    1984-01-01

    A generic floor response spectra has been developed for use in the qualification of electrical and mechanical equipment in operating nuclear power plants. Actual PWR and BWR - Mark I structural models were used as representative of a class of structures. For each model, the stiffness properties were varied, with the same mass, so as to extend the fundamental base structure natural frequency from 2 cps to 36 cps. This resulted in fundamental mode coupled natural frequencies as low as 0.86 cps and as high as 30 cps. The characteristics of 1000 floor response spectra were studied to determine the generic spectra. A procedure for its application to any operating plant has been established. The procedure uses as much or as little information that currently exists at the plant relating to the question of equipment qualification. A generic floor response spectra is proposed for the top level of a generic structure. Reduction factors are applied to the peak acceleration for equipment at lower levels

  19. Development of generic floor response spectra for equipment qualification for seismic loads

    International Nuclear Information System (INIS)

    Curreri, J.R.; Costantino, C.J.

    1984-10-01

    A generic floor response spectra has been developed for use in the qualification of electrical and mechanical equipment in operating nuclear power plants. Actual PWR and BWR - Mark I structural models were used as representative of a class of structures. For each model, the stiffness properties were varied, with the same mass, so as to extend the fundamental base structure natural frequency from 2 cps to 36 cps. This resulted in fundamental mode coupled natural frequencies as low as 0.86 cps and as high as 30 cps. The characteristics of 1000 floor response spectra were studied to determine the generic spectra. A procedure for its application to any operating plant has been established. The procedure uses as much or as little information that currently exists at the plant relating to the question of equipment qualification. A generic floor response spectra is proposed for the top level of a generic structure. Reduction factors are applied to the peak acceleration for equipment at lower levels

  20. Real Time Monitoring and Supervisory Control of Distribution Load Based on Generic Load Allocation: A Smart Grid Solution

    Directory of Open Access Journals (Sweden)

    Anwer Ahmed Memon

    2014-04-01

    Full Text Available Our work is the small part of the smart grid system. This is regarding the check and balance of power consumption at the consumer level. It is a well known fact that the consumers are allocated a fixed load according to their requirement at the time of application for the electricity connection. When the consumer increases its load and does not inform the power company, the result is the overloading of the system. This paper presents a solution regarding distribution and load allocation to each customer. If the customer uses power greater than the load allocated, further power is not provided and consequently that appliance is not turned on unless the total load must not be decreased than the allocated load. This is achieved by designing a processor controlled system that measures the power on main line and also the power taken by each device. Now when a device is turned on, its power is measured by the controller and compares it with the main line power, and when the device consumes some power consequently main line power will also be increased thus this main line power is monitored and if it exceeds particular limit that device is turned off through its relay

  1. Real time monitoring and supervisory control of distribution load based on generic load allocation: a smart grid solution

    International Nuclear Information System (INIS)

    Memon, A.W.; Memon, Z.A.; Aamir, R.R.

    2014-01-01

    Our work is the small part of the smart grid system. This is regarding the check and balance of power consumption at the consumer level. It is a well known fact that the consumers are allocated a fixed load according to their requirement at the time of application for the electricity connection. When the consumer increases its load and does not inform the power company, the result is the overloading of the system. This paper presents a solution regarding distribution and load allocation to each customer. If the customer uses power greater than the load allocated, further power is not provided and consequently that appliance is not turned on unless the total load must not be decreased than the allocated load. This is achieved by designing a processor controlled system that measures the power on main line and also the power taken by each device. Now when a device is turned on, its power is measured by the controller and compares it with the main line power, and when the device consumes some power consequently main line power will also be increased thus this main line power is monitored and if it exceeds particular limit that device is turned off through its relay. (author)

  2. Three-dimensional Computational Fluid Dynamics Investigation of a Spinning Helicopter Slung Load

    Science.gov (United States)

    Theorn, J. N.; Duque, E. P. N.; Cicolani, L.; Halsey, R.

    2005-01-01

    After performing steady-state Computational Fluid Dynamics (CFD) calculations using OVERFLOW to validate the CFD method against static wind-tunnel data of a box-shaped cargo container, the same setup was used to investigate unsteady flow with a moving body. Results were compared to flight test data previously collected in which the container is spinning.

  3. Generic Advantages

    Indian Academy of Sciences (India)

    First page Back Continue Last page Overview Graphics. Generic Advantages. Scalability an incremental coverage. Standardization. Business Plan Flexibility. Lifecycle Flexibility. Reliability. Service Interoperability. Changed Industry dynamics.

  4. Flight Test Results for the Motions and Aerodynamics of a Cargo Container and a Cylindrical Slung Load

    Science.gov (United States)

    2010-04-01

    cylinders is suspected to account for the lateral offset. A simple model of the Magnus effect (ref. 23) indicates that it generates force per...The spin also produced a small but measurable Magnus effect . An extreme cg offset produced stability around small end into the wind. The engine...expected. If we assume the flight data for cable angles are accurate to a fraction of a degree, then a Magnus effect similar to that found for spinning

  5. Family Genericity

    DEFF Research Database (Denmark)

    Ernst, Erik

    2006-01-01

    Type abstraction in object-oriented languages embody two techniques, each with its own strenghts and weaknesses. The first technique is extension, yielding abstraction mechanisms with good support for gradual specification. The prime example is inheritance. The second technique is functional abst...... the result as family genericity. The presented language design has been implemented....

  6. The generic article

    NARCIS (Netherlands)

    Farkas, D.F.; Swart, Henriëtte de

    2005-01-01

    We take a fresh look at the connection between genericity and (in)definiteness by reconsidering a long-standing puzzle concerning the relation between definiteness and genericity. We contrast English on the one hand and Romance languages and Hungarian on the other, focusing on generic sentences

  7. Efficient Generic Functional Programming

    NARCIS (Netherlands)

    Alimarine, A.; Smetsers, J.E.W.

    2005-01-01

    Generic functions are defined by induction on the structural representation of types. As a consequence, by defining just a single generic operation, one acquires this operation over any particular data type. An instance on a specific type is generated by interpretation of the type's structure. A

  8. Optimizing Generic Functions

    NARCIS (Netherlands)

    Alimarine, A.; Smetsers, J.E.W.

    2004-01-01

    Generic functions are defined by induction on the structural representation of types. As a consequence, by defining just a single generic operation, one acquires this operation over any particular type. An instance on a specific type is generated by interpretation of the type's structure. A direct

  9. Optimal, Generic Planning of Maintenance and Inspection of Steel Bridges

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Faber, Michael Havbro

    2002-01-01

    Fatigue damage is an important deterioration mechanism for steel bridges. This paper describes a simplified and generic approach for reliability and risk based inspection planning of fatigue sensitive structural details. Fatigue sensitive details are categorized according to their loading charact...

  10. Generic antibiotics in Japan.

    Science.gov (United States)

    Fujimura, Shigeru; Watanabe, Akira

    2012-08-01

    Generic drugs have been used extensively in many developed countries, although their use in Japan has been limited. Generic drugs reduce drug expenses and thereby national medical expenditure. Because generic drugs provide advantages for both public administration and consumers, it is expected that they will be more widely used in the future. However, the diffusion rate of generic drugs in Japan is quite low compared with that of other developed countries. An investigation on generic drugs conducted by the Ministry of Health, Labour and Welfare in Japan revealed that 17.2 % of doctors and 37.2 % of patients had not used generic drugs. The major reasons for this low use rate included distrust of off-patent products and lower drug price margin compared with the brand name drug. The generic drugs available in the market include external drugs such as wet packs, antihypertensive agents, analgesics, anticancer drugs, and antibiotics. Among them, antibiotics are frequently used in cases of acute infectious diseases. When the treatment of these infections is delayed, the infection might be aggravated rapidly. The pharmacokinetics-pharmacodynamics (PK-PD) theory has been adopted in recent chemotherapy, and in many cases, the most appropriate dosage and administration of antibiotics are determined for individual patients considering renal function; high-dosage antibiotics are used preferably for a short duration. Therefore, a highly detailed antimicrobial agent is necessary. However, some of the generic antibiotics have less antibacterial potency or solubility than the brand name products. We showed that the potency of the generic products of vancomycin and teicoplanin is lower than that of the branded drugs by 14.6 % and 17.3 %, respectively. Furthermore, we confirmed that a generic meropenem drug for injection required about 82 s to solubilize in saline, whereas the brand product required only about 21 s. It was thought that the cause may be the difference in size of bulk

  11. Practicing the Generic (City)

    DEFF Research Database (Denmark)

    Hansen, Lone Koefoed

    2010-01-01

    Flanagan proposes that most locative media artworks neglect the particularities of spaces, their historical and political layers. Koolhaas, on the other hand, states that all urban areas are alike, that we are facing a global Generic City. The paper analyses digital media artist Esther Polak......’s NomadicMILK project in light of the generic and particular properties of space as laid out by Flanagan and Koolhaas in order to discuss the possible reconfiguring practices of locative media....

  12. Scripting XML with Generic Haskell

    NARCIS (Netherlands)

    Atanassow, F.; Clarke, D.; Jeuring, J.T.

    2003-01-01

    A generic program is written once and works on values of many data types. Generic Haskell is a recent extension of the functional programming language Haskell that supports generic programming. This paper discusses how Generic Haskell can be used to implement XML tools whose behaviour depends on

  13. Scripting XML with Generic Haskell

    NARCIS (Netherlands)

    Atanassow, F.; Clarke, D.; Jeuring, J.T.

    2007-01-01

    A generic program is written once and works on values of many data types. Generic Haskell is a recent extension of the functional programming language Haskell that supports generic programming. This paper discusses how Generic Haskell can be used to implement XML tools whose behaviour depends on

  14. Generic phytosanitary irradiation treatments

    International Nuclear Information System (INIS)

    Hallman, Guy J.

    2012-01-01

    The history of the development of generic phytosanitary irradiation (PI) treatments is discussed beginning with its initial proposal in 1986. Generic PI treatments in use today are 150 Gy for all hosts of Tephritidae, 250 Gy for all arthropods on mango and papaya shipped from Australia to New Zealand, 300 Gy for all arthropods on mango shipped from Australia to Malaysia, 350 Gy for all arthropods on lychee shipped from Australia to New Zealand and 400 Gy for all hosts of insects other than pupae and adult Lepidoptera shipped to the United States. Efforts to develop additional generic PI treatments and reduce the dose for the 400 Gy treatment are ongoing with a broad based 5-year, 12-nation cooperative research project coordinated by the joint Food and Agricultural Organization/International Atomic Energy Agency Program on Nuclear Techniques in Food and Agriculture. Key groups identified for further development of generic PI treatments are Lepidoptera (eggs and larvae), mealybugs and scale insects. A dose of 250 Gy may suffice for these three groups plus others, such as thrips, weevils and whiteflies. - Highlights: ► The history of phytosanitary irradiation (PI) treatments is given. ► Generic PI treatments in use today are discussed. ► Suggestions for future research are presented. ► A dose of 250 Gy for most insects may suffice.

  15. Generic robot architecture

    Science.gov (United States)

    Bruemmer, David J [Idaho Falls, ID; Few, Douglas A [Idaho Falls, ID

    2010-09-21

    The present invention provides methods, computer readable media, and apparatuses for a generic robot architecture providing a framework that is easily portable to a variety of robot platforms and is configured to provide hardware abstractions, abstractions for generic robot attributes, environment abstractions, and robot behaviors. The generic robot architecture includes a hardware abstraction level and a robot abstraction level. The hardware abstraction level is configured for developing hardware abstractions that define, monitor, and control hardware modules available on a robot platform. The robot abstraction level is configured for defining robot attributes and provides a software framework for building robot behaviors from the robot attributes. Each of the robot attributes includes hardware information from at least one hardware abstraction. In addition, each robot attribute is configured to substantially isolate the robot behaviors from the at least one hardware abstraction.

  16. Integration of generic issues

    International Nuclear Information System (INIS)

    Thatcher, D.

    1989-01-01

    The NRC has recognized the need to integrate generic issues (GIs). The GI process includes a number of phases, all of which should recognize the potential for overlap and conflict among related issues. In addition to the issues themselves, other related NRC and industry programs and activities need to be factored into the GI process. Integration has taken place, or is taking place, for a number of GIs. Each case of integration involves a specific set of circumstances and, as a result, the way in which integration proceeds can vary. This paper discusses the integration of issues in the generic issue process and provides a number of examples

  17. Rethinking generic skills

    Directory of Open Access Journals (Sweden)

    Roy Canning

    2013-10-01

    Full Text Available The paper provides a critical analysis of the notion of generic or transversal skillscontained with European Union policy discourses. The author presents a conceptualframework that challenges the idea that generic skills are universal, transferable andautonomous. An alternative analysis is put forward that argues the case forcontextualising skills and knowledge within particular understandings and cultures thatare more collective than individualistic in nature. The arguments are framed withinwider cross-disciplinary debates in linguistics, geosemiotics and social-cultural theoryand build upon an earlier paper exploring core skills in the UK (Canning, 2007.

  18. Generic clearance values

    International Nuclear Information System (INIS)

    Bossio, M.C.; Muniz, C.C.

    2009-01-01

    This paper analyzes the Generic Clearance Values established for natural and artificial radionuclides with the objective of evaluating their degree of conservatism in views of adopting them into the regulatory body. Generic clearance values for natural radionuclides have been chosen by experts judgments as the optimum boundary between, on one hand, the ubiquitous unmodified soil concentrations and, on the other hand, activity concentrations in ores, mineral sands, industrial residues and wastes. For artificial radionuclides the clearance levels have been derived from the scenarios postulated in the document 'Safety Reports Series Nr 44' of the IAEA considering quantitative exemption criteria. A set of 8 scenarios were postulated covering external, ingestion and inhalation exposure pathways. For each radionuclide, the generic clearance level was derived as the more restrictive value obtained from the scenarios, that is the lowest ratio between the applicable individual dose and the dose per unit activity concentration (Bq/g). The individual dose was calculated by a formula depending on each scenario and pathway, with different parameters, such as exposure time, dosimetric factors, dilution factor, density of the material, geometric factors, etc. It was concluded that the basis and parameters used for the derivation of the generic clearance levels are quite conservative and therefore its the adoption in Argentina has been recommended. It is expected that their implementation will contribute to optimize the regulatory management system. (author)

  19. Generic Clearance Values

    International Nuclear Information System (INIS)

    Bossio, M.C.; Muniz, C.C.

    2010-01-01

    This paper analyzes the Generic Clearance Values established for natural and artificial radionuclides with the objective of evaluating their degree of conservatism in views of adopting them into the regulatory body. Generic clearance values for natural radionuclides have been chosen by experts judgments as the optimum boundary between, on the one hand, the ubiquitous unmodified soil concentrations and, on the other hand, activity concentrations in ores, mineral sands, industrial residues and wastes. For artificial radionuclides the clearance levels have been derived from the scenarios postulated in the document Safety Reports Series 44 of the IAEA considering quantitative exemption criteria. A set of 8 scenarios were postulated covering external, ingestion and inhalation exposure pathways. For each radionuclide, the generic clearance level was derived as the more restrictive value obtained from the scenarios, that is the lowest ratio between the applicable individual dose and the dose per unit activity concentration (Bq/g). The individual dose was calculated by a formula depending on each scenario and pathway, with different parameters, such as exposure time, dosimetric factors, dilution factor, density of the material, geometric factors, etc. It was concluded that the basis and parameters used for the derivation of the generic clearance levels are quite conservative and therefore its the adoption in Argentina has been recommended. It is expected that their implementation will contribute to optimize the regulatory management system. (authors) [es

  20. Generic phytosanitary irradiation treatments

    Science.gov (United States)

    Hallman, Guy J.

    2012-07-01

    The history of the development of generic phytosanitary irradiation (PI) treatments is discussed beginning with its initial proposal in 1986. Generic PI treatments in use today are 150 Gy for all hosts of Tephritidae, 250 Gy for all arthropods on mango and papaya shipped from Australia to New Zealand, 300 Gy for all arthropods on mango shipped from Australia to Malaysia, 350 Gy for all arthropods on lychee shipped from Australia to New Zealand and 400 Gy for all hosts of insects other than pupae and adult Lepidoptera shipped to the United States. Efforts to develop additional generic PI treatments and reduce the dose for the 400 Gy treatment are ongoing with a broad based 5-year, 12-nation cooperative research project coordinated by the joint Food and Agricultural Organization/International Atomic Energy Agency Program on Nuclear Techniques in Food and Agriculture. Key groups identified for further development of generic PI treatments are Lepidoptera (eggs and larvae), mealybugs and scale insects. A dose of 250 Gy may suffice for these three groups plus others, such as thrips, weevils and whiteflies.

  1. Generic phytosanitary irradiation treatments

    Energy Technology Data Exchange (ETDEWEB)

    Hallman, Guy J [United States Department of Agriculture, Agricultural Research Service, Weslaco, TX (United States)

    2013-01-15

    The history of the development of generic phytosanitary irradiation (PI) treatments is discussed beginning with its initial proposal in 1986. Generic PI treatments in use today are 150 Gy for all hosts of Tephritidae, 250 Gy for all arthropods on mango and papaya shipped from Australia to New Zealand, 300 Gy for all arthropods on mango shipped from Australia to Malaysia, 350 Gy for all arthropods on lychee shipped from Australia to New Zealand and 400 Gy for all hosts of insects other than pupae and adult Lepidoptera shipped to the United States. Efforts to develop additional generic PI treatments and reduce the dose for the 400 Gy treatment are ongoing with a broad based 5-year, 12-nation cooperative research project coordinated by the joint Food and Agricultural Organization/International Atomic Energy Agency Program on Nuclear Techniques in Food and Agriculture. Key groups identified for further development of generic PI treatments are Lepidoptera (eggs and larvae), mealybugs and scale insects. A dose of 250 Gy may suffice for these three groups plus others, such as thrips, weevils and whiteflies. (author)

  2. The generic strategy trap.

    Science.gov (United States)

    Miller, D

    1992-01-01

    Management experts claim that for a company to thrive, it must concentrate on a single generic strategy--on one thing it does better than its rivals. But specialization also has its disadvantages. The author suggests that a broader, mixed approach may be preferable.

  3. Generic and biosimilar medicines: quid?

    Directory of Open Access Journals (Sweden)

    Steven Simoens

    2012-12-01

    Full Text Available Once intellectual property protection, data and marketing exclusivity of reference medicines have expired, generic medicines and biosimilar medicines can enter the off-patent market. This market entry is conditional on the approval of marketing authorization, pricing and reimbursement. Given that there tends to be confusion surrounding generic and biosimilar medicines, this Editorial introduces basic concepts related to generic and biosimilar medicines and presents the different studies and articles included in this supplement dedicated to generic and biosimilar medicines.

  4. Generics Pricing: The Greek Paradox.

    Science.gov (United States)

    Karafyllis, Ioannis; Variti, Lamprini

    2017-01-01

    This paper explains and develops a methodological framework to help evaluate the performance of generic pharmaceutical policies and the correct evaluation of generics sales. Until today erroneous recording of generics does not help proper pricing and their penetration in the Greek market. This classifies Greece on the outliners in every study or comparison that is referred on papers or studies.

  5. Generic Reed Solomon Encorder

    Directory of Open Access Journals (Sweden)

    Petrus Mursanto

    2006-11-01

    Full Text Available Reed Solomon (RS codes is a mechanism to detect and correct burst of errors in data transmission and storage systems. It provides a solid introduction to foundation mathematical concept of Galois Field algebra and its application. With the development of digital hardware technology, the RS concepts were brought into reality, i.e. the implementation of RS codec chips. This paper presents the development steps of a generic RS encoder using VHDL. The encoder is able to handle generic width of data, variable length of information, number of error as well as variable form of primitive polynomial and generator polynomial used in the system. The design has been implemented for FPGA chip Xilinx XC3S200-5FT256 and has a better performance than commercially available equivalent encoder.

  6. Generic safety documentation model

    International Nuclear Information System (INIS)

    Mahn, J.A.

    1994-04-01

    This document is intended to be a resource for preparers of safety documentation for Sandia National Laboratories, New Mexico facilities. It provides standardized discussions of some topics that are generic to most, if not all, Sandia/NM facilities safety documents. The material provides a ''core'' upon which to develop facility-specific safety documentation. The use of the information in this document will reduce the cost of safety document preparation and improve consistency of information

  7. Comparison of generic-to-brand switchback patterns for generic and authorized generic drugs

    Science.gov (United States)

    Hansen, Richard A.; Qian, Jingjing; Berg, Richard; Linneman, James; Seoane-Vazquez, Enrique; Dutcher, Sarah K.; Raofi, Saeid; Page, C. David; Peissig, Peggy

    2018-01-01

    Background While generic drugs are therapeutically equivalent to brand drugs, some patients and healthcare providers remain uncertain about whether they produce identical outcomes. Authorized generics, which are identical in formulation to corresponding brand drugs but marketed as a generic, provide a unique post-marketing opportunity to study whether utilization patterns are influenced by perceptions of generic drugs. Objectives To compare generic-to-brand switchback rates between generics and authorized generics. Methods A retrospective cohort study was conducted using claims and electronic health records data from a regional U.S. healthcare system. Ten drugs with authorized generics and generics marketed between 1999 and 2014 were evaluated. Eligible adult patients received a brand drug during the 6 months preceding generic entry, and then switched to a generic or authorized generic. Patients in this cohort were followed for up to 30 months from the index switch date to evaluate occurrence of generic-to-brand switchbacks. Switchback rates were compared between patients on authorized generics versus generics using Kaplan-Meier curves and Cox proportional hazards models, controlling for individual drug effects, age, sex, Charlson comorbidity score, pre-index drug use characteristics, and pre-index healthcare utilization. Results Among 5,542 unique patients that switched from brand-to-generic or brand-to-authorized generic, 264 (4.8%) switched back to the brand drug. Overall switchback rates were similar for authorized generics compared with generics (HR=0.86; 95% CI 0.65-1.15). The likelihood of switchback was higher for alendronate (HR=1.64; 95% CI 1.20-2.23) and simvastatin (HR=1.81; 95% CI 1.30-2.54) and lower for amlodipine (HR=0.27; 95% CI 0.17-0.42) compared with other drugs in the cohort. Conclusions Overall switchback rates were similar between authorized generic and generic drug users, indirectly supporting similar efficacy and tolerability profiles for

  8. Generic patch inference

    DEFF Research Database (Denmark)

    Andersen, Jesper; Lawall, Julia

    2010-01-01

    A key issue in maintaining Linux device drivers is the need to keep them up to date with respect to evolutions in Linux internal libraries. Currently, there is little tool support for performing and documenting such changes. In this paper we present a tool, spdiff, that identifies common changes...... developers can use it to extract an abstract representation of the set of changes that others have made. Our experiments on recent changes in Linux show that the inferred generic patches are more concise than the corresponding patches found in commits to the Linux source tree while being safe with respect...

  9. Advertising and generic market entry.

    Science.gov (United States)

    Königbauer, Ingrid

    2007-03-01

    The effect of purely persuasive advertising on generic market entry and social welfare is analysed. An incumbent has the possibility to invest in advertising which affects the prescribing physician's perceived relative qualities of the brand-name and the generic version of the drug. Advertising creates product differentiation and can induce generic market entry which is deterred without differentiation due to strong Bertrand competition. However, over-investment in advertising can deter generic market entry under certain conditions and reduces welfare as compared to accommodated market entry.

  10. NET 40 Generics Beginner's Guide

    CERN Document Server

    Mukherjee, Sudipta

    2012-01-01

    This is a concise, practical guide that will help you learn Generics in .NET, with lots of real world and fun-to-build examples and clear explanations. It is packed with screenshots to aid your understanding of the process. This book is aimed at beginners in Generics. It assumes some working knowledge of C# , but it isn't mandatory. The following would get the most use out of the book: Newbie C# developers struggling with Generics. Experienced C++ and Java Programmers who are migrating to C# and looking for an alternative to other generic frameworks like STL and JCF would find this book handy.

  11. Comparison of Generic-to-Brand Switchback Rates Between Generic and Authorized Generic Drugs.

    Science.gov (United States)

    Hansen, Richard A; Qian, Jingjing; Berg, Richard; Linneman, James; Seoane-Vazquez, Enrique; Dutcher, Sarah K; Raofi, Saeid; Page, C David; Peissig, Peggy

    2017-04-01

    Generic drugs contain identical active ingredients as their corresponding brand drugs and are pharmaceutically equivalent and bioequivalent, whereas authorized generic drugs (AGs) contain both identical active and inactive ingredients as their corresponding brand drugs but are marketed as generics. This study compares generic-to-brand switchback rates between generic and AGs. Retrospective cohort study. Claims and electronic health record data from a regional U.S. health care system. The full cohort consisted of 5542 unique patients who received select branded drugs during the 6 months prior to their generic drug market availability (between 1999 and 2014) and then were switched to an AG or generic drug within 30 months of generic drug entry. For these patients, 5929 unique patient-drug combinations (867 with AGs and 5062 with generic drugs) were evaluated. Ten drugs with AGs and generics marketed between 1999 and 2014 were evaluated. The date of the first generic prescription was considered the index date for each drug, and it marked the beginning of follow-up to evaluate the occurrence of generic-to-brand switchback patterns over the subsequent 30 months. Switchback rates were compared between patients receiving AGs versus those receiving generics using multivariable Cox proportional hazards models, controlling for individual drug effects, age, sex, Charlson Comorbidity Score, pre-index drug use characteristics, and pre-index health care utilization. Among the 5542 unique patients who switched from brand to generic or brand to AG, 264 (4.8%) switched back to the brand drug. Overall switchback rates were similar for AGs compared with generics (hazard ratio [HR] 0.86, 95% confidence interval [CI] 0.65-1.15). The likelihood of switchback was higher for alendronate (HR 1.64, 95% CI 1.20-2.23) and simvastatin (HR 1.81, 95% CI 1.30-2.54) and lower for amlodipine (HR 0.27, 95% CI 0.17-0.42) compared with the other drugs evaluated. Overall switchback rates were similar

  12. Article choice in plural generics

    NARCIS (Netherlands)

    Farkas, D.F.; Swart, Henriëtte de

    2007-01-01

    We discuss two groups of languages where article use contrasts in generic plural sentences but is otherwise essentially similar. The languages in the first group (English and Dutch) use bare plurals in the expression of kind reference (‘Dinosaurs are extinct’) and in generic

  13. Quality of generic medicines in South Africa

    DEFF Research Database (Denmark)

    Patel, Aarti; Gauld, Robin; Norris, Pauline

    2012-01-01

    Generic Medicines are an important policy option allowing for access to affordable, essential medicines. Quality of generic medicines must be guaranteed through the activities of national medicines regulatory authorities. Existing negative perceptions surrounding the quality of generic medicines ...

  14. Encouraging generic use can yield significant savings.

    Science.gov (United States)

    Zimmerman, Christina

    2012-11-01

    Key findings. (1) Zero copayment for generic drugs is the greatest influencer of generic statin utilization. (2) Both higher copayments for generic drugs and lower copayments for competing brands are associated with a decreased probability of using generic statins. (3) Prior authorization and step therapy requirements for brand-name statins are associated with an increased use of generic drugs. (4) Greater use of generic statins should reduce costs for patients, plans, and Medicare.

  15. Generic Drugs: Questions and Answers

    Science.gov (United States)

    ... Vaccines, Blood & Biologics Animal & Veterinary Cosmetics Tobacco Products Drugs Home Drugs Resources for You Information for Consumers (Drugs) Questions & Answers Generic Drugs: Questions & Answers Share Tweet Linkedin Pin it More ...

  16. The Generic Data Capture Facility

    Science.gov (United States)

    Connell, Edward B.; Barnes, William P.; Stallings, William H.

    1987-01-01

    The Generic Data Capture Facility, which can provide data capture support for a variety of different types of spacecraft while enabling operations costs to be carefully controlled, is discussed. The data capture functions, data protection, isolation of users from data acquisition problems, data reconstruction, and quality and accounting are addressed. The TDM and packet data formats utilized by the system are described, and the development of generic facilities is considered.

  17. Hanford Generic Interim Safety Basis

    Energy Technology Data Exchange (ETDEWEB)

    Lavender, J.C.

    1994-09-09

    The purpose of this document is to identify WHC programs and requirements that are an integral part of the authorization basis for nuclear facilities that are generic to all WHC-managed facilities. The purpose of these programs is to implement the DOE Orders, as WHC becomes contractually obligated to implement them. The Hanford Generic ISB focuses on the institutional controls and safety requirements identified in DOE Order 5480.23, Nuclear Safety Analysis Reports.

  18. Hanford Generic Interim Safety Basis

    International Nuclear Information System (INIS)

    Lavender, J.C.

    1994-01-01

    The purpose of this document is to identify WHC programs and requirements that are an integral part of the authorization basis for nuclear facilities that are generic to all WHC-managed facilities. The purpose of these programs is to implement the DOE Orders, as WHC becomes contractually obligated to implement them. The Hanford Generic ISB focuses on the institutional controls and safety requirements identified in DOE Order 5480.23, Nuclear Safety Analysis Reports

  19. Generic Example Proving Criteria for All

    Science.gov (United States)

    Yopp, David; Ely, Rob; Johnson­-Leung, Jennifer

    2015-01-01

    We review literature that discusses generic example proving and highlight ambiguities that pervade our research community's discourse about generic example arguments. We distinguish between pedagogical advice for choosing good examples that can serve as generic examples when teaching and advice for developing generic example arguments. We provide…

  20. Generic penetration in the retail antidepressant market.

    Science.gov (United States)

    Ventimiglia, Jeffrey; Kalali, Amir H

    2010-06-01

    In this article, we explore the accelerated penetration of generic antidepressants in the United States market following the availability of generic citalopram and sertraline. Analysis suggests that overall, generic penetration into the antidepressant market has grown from approximately 41 percent in January 2004 to over 73 percent in January 2010. Similar trends are uncovered when branded and generic prescriptions are analyzed by specialty.

  1. Retailing policies for generic medicines.

    Science.gov (United States)

    Narciso, Susana

    2005-06-01

    As there is general disagreement about the way generic medicines should be commercialized, two retailing policies are analyzed, taking into account their effects on the welfare of patients, government, pharmacies and physicians. In the first policy scenario, pharmacies are allowed to substitute generic medicines for branded ones, while in the second, substitution is forbidden. In both cases a pharmacies association is allowed to have a share in the production of generic medicines. The model predicts that under some conditions patients may prefer substitution by pharmacies but when doctors' decisions are binding, they are never "excessively bad". However, the policy choice belongs to the government, which prefers to allow for substitution more often than patients would like.

  2. Generic Graph Grammar: A Simple Grammar for Generic Procedural Modelling

    DEFF Research Database (Denmark)

    Christiansen, Asger Nyman; Bærentzen, Jakob Andreas

    2012-01-01

    in a directed cyclic graph. Furthermore, the basic productions are chosen such that Generic Graph Grammar seamlessly combines the capabilities of L-systems to imitate biological growth (to model trees, animals, etc.) and those of split grammars to design structured objects (chairs, houses, etc.). This results...

  3. Generic Software Architecture for Launchers

    Science.gov (United States)

    Carre, Emilien; Gast, Philippe; Hiron, Emmanuel; Leblanc, Alain; Lesens, David; Mescam, Emmanuelle; Moro, Pierre

    2015-09-01

    The definition and reuse of generic software architecture for launchers is not so usual for several reasons: the number of European launcher families is very small (Ariane 5 and Vega for these last decades); the real time constraints (reactivity and determinism needs) are very hard; low levels of versatility are required (implying often an ad hoc development of the launcher mission). In comparison, satellites are often built on a generic platform made up of reusable hardware building blocks (processors, star-trackers, gyroscopes, etc.) and reusable software building blocks (middleware, TM/TC, On Board Control Procedure, etc.). If some of these reasons are still valid (e.g. the limited number of development), the increase of the available CPU power makes today an approach based on a generic time triggered middleware (ensuring the full determinism of the system) and a centralised mission and vehicle management (offering more flexibility in the design and facilitating the long term maintenance) achievable. This paper presents an example of generic software architecture which could be envisaged for future launchers, based on the previously described principles and supported by model driven engineering and automatic code generation.

  4. Testing properties of generic functions

    NARCIS (Netherlands)

    Jansson, P.; Jeuring, J.T.; Cabenda, L.; Engels, G.; Kleerekoper, J.; Mak, S.; Overeem, M.; Visser, Kees

    2007-01-01

    A datatype-generic function is a family of functions indexed by (the structure of) a type. Examples include equality tests, maps and pretty printers. Property based testing tools like QuickCheck and Gast support the de¯nition of properties and test-data generators, and they check if a

  5. Generic component failure data base

    International Nuclear Information System (INIS)

    Eide, S.A.; Calley, M.B.

    1992-01-01

    This report discusses comprehensive component generic failure data base which has been developed for light water reactor probabilistic risk assessments. The Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR) was used to generate component failure rates. Using this approach, most of the failure rates are based on actual plant data rather then existing estimates

  6. 'Genericism' in Danish welfare professions

    DEFF Research Database (Denmark)

    Larsen, Verner

    and skills in the basic disciplines of the professions also termed as disciplinary and procedural knowledge '. Thus the main research question for this paper is: What consequences do recent reform actions in Danish welfare education concerning generic competence have on developing professional knowledge...

  7. Exploring knowledge, perceptions and attitudes about generic ...

    African Journals Online (AJOL)

    Exploring knowledge, perceptions and attitudes about generic medicines among final-year health science students. ... had knowledge deficits about the safety, quality and efficacy of generic medicines. The dissemination of information about generic medicines may strengthen future knowledge, attitudes and perceptions.

  8. Comparing approaches to generic programming in Haskell

    NARCIS (Netherlands)

    Hinze, R.; Jeuring, J.T.; Löh, A.

    2006-01-01

    The last decade has seen a number of approaches to generic programming: PolyP, Functorial ML, `Scrap Your Boilerplate', Generic Haskell, `Generics for the Masses', etc. The approaches vary in sophistication and target audience: some propose full-blown pro- gramming languages, some suggest

  9. Comparing approaches to generic programming in Haskell

    NARCIS (Netherlands)

    Hinze, R.; Jeuring, J.T.; Löh, A.

    2006-01-01

    The last decade has seen a number of approaches to data- type-generic programming: PolyP, Functorial ML, `Scrap Your Boiler- plate', Generic Haskell, `Generics for the Masses', etc. The approaches vary in sophistication and target audience: some propose full-blown pro- gramming languages, some

  10. Proceedings Workshop on Generic Programming (WGP2000)

    NARCIS (Netherlands)

    Jeuring, J.T.

    2000-01-01

    This report contains the papers selected for presentation at the 2nd Workshop on Generic Programming (WGP2000), which was held on July 6, 2000 in Ponte de Lima, Portugal. Generic programming is about making programs more adaptable by making them more general. Generic programs often embody

  11. Enhancing Safety through Generic Competencies

    Directory of Open Access Journals (Sweden)

    S. Mockel

    2014-03-01

    Full Text Available This article provides insights into proactive safety management and mitigation. An analysis of accident reports reveals categories of supervening causes of accidents which can be directly linked to the concept of generic competencies (information management, communication and coordination, problem solving, and effect control. These findings strongly suggest adding the human element as another safety-constituting pillar to the concept of ship safety next to technology and regulation. We argue that the human element has unique abilities in dealing with critical and highly dynamic situations which can contribute to the system's recovery from non-routine or critical situations. By educating seafarers in generic competencies we claim to enable the people onboard to successfully deal with critical situations.

  12. Automated analysis in generic groups

    Science.gov (United States)

    Fagerholm, Edvard

    This thesis studies automated methods for analyzing hardness assumptions in generic group models, following ideas of symbolic cryptography. We define a broad class of generic and symbolic group models for different settings---symmetric or asymmetric (leveled) k-linear groups --- and prove ''computational soundness'' theorems for the symbolic models. Based on this result, we formulate a master theorem that relates the hardness of an assumption to solving problems in polynomial algebra. We systematically analyze these problems identifying different classes of assumptions and obtain decidability and undecidability results. Then, we develop automated procedures for verifying the conditions of our master theorems, and thus the validity of hardness assumptions in generic group models. The concrete outcome is an automated tool, the Generic Group Analyzer, which takes as input the statement of an assumption, and outputs either a proof of its generic hardness or shows an algebraic attack against the assumption. Structure-preserving signatures are signature schemes defined over bilinear groups in which messages, public keys and signatures are group elements, and the verification algorithm consists of evaluating ''pairing-product equations''. Recent work on structure-preserving signatures studies optimality of these schemes in terms of the number of group elements needed in the verification key and the signature, and the number of pairing-product equations in the verification algorithm. While the size of keys and signatures is crucial for many applications, another aspect of performance is the time it takes to verify a signature. The most expensive operation during verification is the computation of pairings. However, the concrete number of pairings is not captured by the number of pairing-product equations considered in earlier work. We consider the question of what is the minimal number of pairing computations needed to verify structure-preserving signatures. We build an

  13. Generic Reliability-Based Inspection Planning for Fatigue Sensitive Details

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Straub, Daniel; Faber, Michael Havbro

    2005-01-01

    of fatigue sensitive details in fixed offshore steel jacket platforms and FPSO ship structures. Inspection and maintenance activities are planned such that code based requirements to the safety of personnel and environment for the considered structure are fulfilled and at the same time such that the overall......The generic approach for planning of in-service NDT inspections is extended to cover the case where the fatigue load is modified during the design lifetime of the structure. Generic reliability-based inspection planning has been developed as a practical approach to perform inspection planning...... expected costs for design, inspections, repairs and failures are minimized. The method is based on the assumption of “no-finds” of cracks during inspections. Each fatigue sensitive detail is categorized according to their type of details (SN curves), FDF values, RSR values, inspection, repair and failure...

  14. Generic Crystalline Disposal Reference Case

    Energy Technology Data Exchange (ETDEWEB)

    Painter, Scott Leroy [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Chu, Shaoping [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Harp, Dylan Robert [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Perry, Frank Vinton [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Wang, Yifeng [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-02-20

    A generic reference case for disposal of spent nuclear fuel and high-level radioactive waste in crystalline rock is outlined. The generic cases are intended to support development of disposal system modeling capability by establishing relevant baseline conditions and parameters. Establishment of a generic reference case requires that the emplacement concept, waste inventory, waste form, waste package, backfill/buffer properties, EBS failure scenarios, host rock properties, and biosphere be specified. The focus in this report is on those elements that are unique to crystalline disposal, especially the geosphere representation. Three emplacement concepts are suggested for further analyses: a waste packages containing 4 PWR assemblies emplaced in boreholes in the floors of tunnels (KBS-3 concept), a 12-assembly waste package emplaced in tunnels, and a 32-assembly dual purpose canister emplaced in tunnels. In addition, three failure scenarios were suggested for future use: a nominal scenario involving corrosion of the waste package in the tunnel emplacement concepts, a manufacturing defect scenario applicable to the KBS-3 concept, and a disruptive glaciation scenario applicable to both emplacement concepts. The computational approaches required to analyze EBS failure and transport processes in a crystalline rock repository are similar to those of argillite/shale, with the most significant difference being that the EBS in a crystalline rock repository will likely experience highly heterogeneous flow rates, which should be represented in the model. The computational approaches required to analyze radionuclide transport in the natural system are very different because of the highly channelized nature of fracture flow. Computational workflows tailored to crystalline rock based on discrete transport pathways extracted from discrete fracture network models are recommended.

  15. GLAD: a generic lattice debugger

    International Nuclear Information System (INIS)

    Lee, M.J.

    1992-01-01

    Today, numerous simulation and analysis codes exist for the design, commission, and operation of accelerator beam lines. There is a need to develop a common user interface and database link to run these codes interactively. This paper will describe a proposed system, GLAD (Generic LAttice Debugger), to fulfill this need. Specifically, GLAD can be used to find errors in beam lines during commissioning, control beam parameters during operation, and design beam line optics and error correction systems for the next generation of linear accelerators and storage rings. (author)

  16. Generic maximum likely scale selection

    DEFF Research Database (Denmark)

    Pedersen, Kim Steenstrup; Loog, Marco; Markussen, Bo

    2007-01-01

    in this work is on applying this selection principle under a Brownian image model. This image model provides a simple scale invariant prior for natural images and we provide illustrative examples of the behavior of our scale estimation on such images. In these illustrative examples, estimation is based......The fundamental problem of local scale selection is addressed by means of a novel principle, which is based on maximum likelihood estimation. The principle is generally applicable to a broad variety of image models and descriptors, and provides a generic scale estimation methodology. The focus...

  17. Generic Performance Measures. Chapter 8

    Energy Technology Data Exchange (ETDEWEB)

    Daube-Witherspoon, M. E. [Department of Radiology, University of Pennsylvania, Philadelphia, PA (United States)

    2014-12-15

    The generic nuclear medicine imager, whether a gamma camera, single photon emission computed tomography (SPECT) system or positron emission tomography (PET) scanner, comprises several main components: a detection system, a form of collimation to select γ rays at specific angles, electronics and a computing system to create the map of the radiotracer distribution. This section discusses these components in more detail. The first stage of a generic nuclear medicine imager is the detection of the γ rays emitted by the radionuclide. In the case of PET, the radiation of interest are the 511 keV annihilation photons that result from the interaction of the positron emitted by the radionuclide with an electron in the tissue. For general nuclear medicine and SPECT, there is one or sometimes more than one γ ray of interest, with energies in the range of <100 to >400 keV. The γ rays are detected when they interact and deposit energy in the crystal(s) of the imaging system. There are two main types of detector: crystals that give off light that can be converted to an electrical signal when the γ ray interacts (‘scintillators’) and semiconductors, crystals that generate an electrical signal directly when the γ ray deposits energy in the crystal. Scintillation detectors include NaI(Tl), bismuth germanate (BGO) and lutetium oxyorthosilicate (LSO); semiconductor detectors used in nuclear medicine imagers include cadmium zinc telluride (CZT). Radiation detectors are described in more detail in Chapter 6.

  18. Prioritization of generic safety issues

    International Nuclear Information System (INIS)

    Emrit, R.; Minners, W.; VanderMolen, H.

    1983-12-01

    This report presents the priority rankings for generic safety issues related to nuclear power plants. The purpose of these rankings is to assist in the timely and efficient allocation of NRC resources for the resolution of those safety issues that have a significant potential for reducing risk. The report focuses on the prioritization of generic safety issues. Issues primarily concerned with the licensing process or environmental protection and not directly related to safety have been excluded from prioritization. The prioritized issues include: TMI Action Plan items under development; previously proposed issues covered by Task Action Plans, except issues designated at Unresolved Safety Issues (USIs) which had already been assigned high priority; and newly-proposed issues. Future supplements to this report will include the prioritization of additional issues. The safety priority rankings are HIGH, MEDIUM, LOW, and DROP and have been assigned on the basis of risk significance estimates, the ratio of risk to costs and other impacts estimated to result if resolutions of the safety issues were implemented, and the consideration of uncertainties and other quantitative or qualitative factors. To the extent practical, estimates are quantitative

  19. Generic communications index: User's manual

    International Nuclear Information System (INIS)

    Dean, R.S.; Steinbrecher, D.H.; Hennick, A.

    1987-12-01

    This report is a manual for providing information required to use a special computer program developed by the NRC for indexing generic communications. The program is written in a user-friendly menu driven form using dBASE III programming language. It facilitates use of the required dBASE III search and sort capabilities to access records in a database called Generic Communications Index. This index is made up of one record each for all bulletins, circulars, and information notices, including revisions and supplements, from 1971, when such documentation started, through 1986 (or to the latest update). The program is designed for use by anyone modestly acquainted with the general use of IBM-compatible personal computers. The manual contains both a brief overview and a detailed description of the program, as well as detailed instructions for getting started using the program on a personal computer with either a two-floppy disk or a hard disk system. Included at the end are a brief description of how to handle problems which might occur, and notes on the makeup of the program and database files for help in adding records of communications for future years

  20. Skin rash during treatment with generic itraconazole.

    Science.gov (United States)

    De Vuono, Antonio; Palleria, Caterina; Scicchitano, Francesca; Squillace, Aida; De Sarro, Giovambattista; Gallelli, Luca

    2014-04-01

    Generic drugs have the same active substance, the same pharmaceutical form, the same therapeutic indications and a similar bioequivalence with the reference medicinal product (branded). Although a similar efficacy is postulated, some cases of clinical inefficacy during treatment with generic formulations have been reported. In this case, we describe a woman with onychomycosis that developed a skin rash during treatment with a generic formulation of itraconazole. Drug administration and its re-challenge confirmed the association between itraconazole and skin rash. Both Naranjo probability scale and World Health Organization causality assessment scale documented a probable association between generic-itraconazole and skin rash. The switch from generic formulation to brand one induced an improvement of symptoms. Since we are unable to evaluate the role of each excipient in the development of skin rash, we cannot rule out their involvement. However, more data are necessary to better define the similarities or differences between branded and generic formulations.

  1. Generic medicines and generic substitution: contrasting perspectives of stakeholders in Ireland.

    Science.gov (United States)

    O'Leary, A; Usher, C; Lynch, M; Hall, M; Hemeryk, L; Spillane, S; Gallagher, P; Barry, M

    2015-12-15

    The Health (Pricing and Supply of Medical Goods) Act 2013 passed into law in July 2013 and legislated for generic substitution in Ireland. The aim of the study was to ascertain the knowledge and perceptions of stakeholders i.e. patients, pharmacists and prescribers, of generic medicines and to generic substitution with the passing of legislation. Three stakeholder specific questionnaires were developed to assess knowledge of and perceptions to generic medicines and generic substitution. Purposive samples of patients, prescribers and pharmacists were analysed. Descriptive quantitative and qualitative analyses were undertaken. A total of 762 healthcare professionals and 353 patients were recruited. The study highlighted that over 84% of patients were familiar with generic medicines and are supportive of the concept of generic substitution. Approximately 74% of prescribers and 84% of pharmacists were supportive of generic substitution in most cases. The main areas of concern highlighted by the healthcare professionals that might impact on the successful implementation of the policy, were the issue of bioequivalence with generic medicines, the computer software systems used at present in general practitioner (GP) surgeries and the availability of branded generics. The findings from this study identify a high baseline rate of acceptance to generic medicines and generic substitution among patients, prescribers and pharmacists in the Irish setting. The concerns of the main stakeholders provide a valuable insight into the potential difficulties that may arise in its implementation, and the need for on-going reassurance and proactive dissemination of the impact of the generic substitution policy. The existing positive attitude to generic medicines and generic substitution among key stakeholders in Ireland to generic substitution, combined with appropriate support and collaboration should result in the desired increase in rates of prescribing, dispensing and use of generic

  2. Generic domain models in software engineering

    Science.gov (United States)

    Maiden, Neil

    1992-01-01

    This paper outlines three research directions related to domain-specific software development: (1) reuse of generic models for domain-specific software development; (2) empirical evidence to determine these generic models, namely elicitation of mental knowledge schema possessed by expert software developers; and (3) exploitation of generic domain models to assist modelling of specific applications. It focuses on knowledge acquisition for domain-specific software development, with emphasis on tool support for the most important phases of software development.

  3. PROBLEM OF GENERIC REPLACEMENT: ADVANTAGES AND DISADVANTAGES

    Directory of Open Access Journals (Sweden)

    S. N. Tolpygina

    2009-01-01

    Full Text Available The main differences between original and generic drugs as well as registration criteria for generics are described. Possible reasons of discrepancy in bioequivalence and therapeutic equivalence of original and generic drugs are reviewed. The examples of such a discrepancy as a result of comparative clinical trails (enalapril maleate are discussed. Approaches to planning of comparative trails on drug therapeutic equivalence are presented. 

  4. Determinants of generic drug substitution in Switzerland

    Directory of Open Access Journals (Sweden)

    Lufkin Thomas M

    2011-01-01

    Full Text Available Abstract Background Since generic drugs have the same therapeutic effect as the original formulation but at generally lower costs, their use should be more heavily promoted. However, a considerable number of barriers to their wider use have been observed in many countries. The present study examines the influence of patients, physicians and certain characteristics of the generics' market on generic substitution in Switzerland. Methods We used reimbursement claims' data submitted to a large health insurer by insured individuals living in one of Switzerland's three linguistic regions during 2003. All dispensed drugs studied here were substitutable. The outcome (use of a generic or not was modelled by logistic regression, adjusted for patients' characteristics (gender, age, treatment complexity, substitution groups and with several variables describing reimbursement incentives (deductible, co-payments and the generics' market (prices, packaging, co-branded original, number of available generics, etc.. Results The overall generics' substitution rate for 173,212 dispensed prescriptions was 31%, though this varied considerably across cantons. Poor health status (older patients, complex treatments was associated with lower generic use. Higher rates were associated with higher out-of-pocket costs, greater price differences between the original and the generic, and with the number of generics on the market, while reformulation and repackaging were associated with lower rates. The substitution rate was 13% lower among hospital physicians. The adoption of the prescribing practices of the canton with the highest substitution rate would increase substitution in other cantons to as much as 26%. Conclusions Patient health status explained a part of the reluctance to substitute an original formulation by a generic. Economic incentives were efficient, but with a moderate global effect. The huge interregional differences indicated that prescribing behaviours and

  5. Skin rash during treatment with generic itraconazole

    OpenAIRE

    De Vuono, Antonio; Palleria, Caterina; Scicchitano, Francesca; Squillace, Aida; De Sarro, Giovambattista; Gallelli, Luca

    2014-01-01

    Generic drugs have the same active substance, the same pharmaceutical form, the same therapeutic indications and a similar bioequivalence with the reference medicinal product (branded). Although a similar efficacy is postulated, some cases of clinical inefficacy during treatment with generic formulations have been reported. In this case, we describe a woman with onychomycosis that developed a skin rash during treatment with a generic formulation of itraconazole. Drug administration and its re...

  6. Generic Hurricane Extreme Seas State

    DEFF Research Database (Denmark)

    Wehmeyer, Christof; Skourup, Jesper; Frigaard, Peter

    2012-01-01

    Extreme sea states, which the IEC 61400-3 (2008) standard requires for the ultimate limit state (ULS) analysis of offshore wind turbines are derived to establish the design basis for the conceptual layout of deep water floating offshore wind turbine foundations in hurricane affected areas....... Especially in the initial phase of floating foundation concept development, site specific metocean data are usually not available. As the areas of interest are furthermore not covered by any design standard, in terms of design sea states, generic and in engineering terms applicable environmental background...... data is required for a type specific conceptual design. ULS conditions for different return periods are developed, which can subsequently be applied in siteindependent analysis and conceptual design. Recordings provided by National Oceanic and Atmospheric Administration (NOAA), of hurricanes along...

  7. 76 FR 57767 - Proposed Generic Communication; Draft NRC Generic Letter 2011-XX: Seismic Risk Evaluations for...

    Science.gov (United States)

    2011-09-16

    ... NUCLEAR REGULATORY COMMISSION [NRC-2011-0204] Proposed Generic Communication; Draft NRC Generic Letter 2011-XX: Seismic Risk Evaluations for Operating Reactors AGENCY: Nuclear Regulatory Commission... FR 54507), that requested public comment on Draft NRC Generic Letter 2011- XX: Seismic Risk...

  8. A Generic Approach to Parameter Control

    NARCIS (Netherlands)

    Karafotias, G.; Smit, S.K.; Eiben, A.E.

    2012-01-01

    On-line control of EA parameters is an approach to parameter setting that offers the advantage of values changing during the run. In this paper, we investigate parameter control from a generic and parameter-independent perspective. We propose a generic control mechanism that is targeted to

  9. Once more the generic name Passerina Vieillot

    NARCIS (Netherlands)

    Oort, van E.D.

    1910-01-01

    The note on the generic name of the Snow-bunting by Dr. E. Hartert in this part of our periodical gives me cause to revert to the subject of my note on the generic name Passerina Vieillot and to state here, that I stand to what I have said about the rejection of this name in Zoology (Notes Leyden

  10. HTGR generic technology program plan (FY 80)

    International Nuclear Information System (INIS)

    1980-01-01

    Purpose of the program is to develop base technology and to perform design and development common to the HTGR Steam Cycle, Gas Turbine, and Process Heat Plants. The generic technology program breaks into the base technology, generic component, pebble-bed study, technology transfer, and fresh fuel programs

  11. South African patient's acceptance of generic drugs

    African Journals Online (AJOL)

    mechanism in this regard for final consumers, insurance providers, and ... facilities are viewed as inferior, treated with sus- picion and ... to choose a generic drug if the decision was supported by their doctor ... The effect of brand to generic and ...

  12. Brand vs generic adverse event reporting patterns: An authorized generic-controlled evaluation of cardiovascular medications.

    Science.gov (United States)

    Alatawi, Y; Rahman, Md M; Cheng, N; Qian, J; Peissig, P L; Berg, R L; Page, C D; Hansen, R A

    2018-06-01

    Some public scepticism exists about generics in terms of whether brand and generic drugs produce identical outcomes. This study explores whether adverse event (AE) reporting patterns are similar between brand and generic drugs, using authorized generics (AGs) as a control for possible generic drug perception biases. Events reported to the FDA Adverse Event Reporting System from the years 2004-2015 were analysed. Drugs were classified as brand, AG or generic based on drug and manufacturer names. Reports were included if amlodipine, losartan, metoprolol extended release (ER) or simvastatin were listed as primary or secondary suspect drugs. Disproportionality analyses using the reporting odds ratio (ROR) assessed the relative rate of reporting labelled AEs compared to reporting these AEs with all other drugs. The Breslow-Day test compared RORs across brand, AG and generic. Interrupted time series analysis evaluated the impact of generic entry on reporting trends. Generics accounted for significant percentages of total U.S. reports, but AGs accounted for smaller percentages of reports, including for amlodipine (14.26%), losartan (1.48%), metoprolol ER (0.35%) and simvastatin (0.70%). Whereas the RORs were significantly different for multiple brand vs generic comparisons, the AG vs generic comparisons yielded fewer statistically significant findings. Namely, only the ROR for AG differed from generic for amlodipine with peripheral oedema (P brand and generic compared with AG and generic. Use of AGs as a control for perception biases against generics is useful, but this approach can be limited by small AG report numbers. Requiring the manufacturer name to be printed on the prescription bottle or packaging could improve the accuracy of assignment for products being reported. © 2017 John Wiley & Sons Ltd.

  13. Evolution of generic supporting conditions for feeders of 500 M We PHWR

    International Nuclear Information System (INIS)

    Prasad, K.H.; Gupta, K.N.; Bapat, C.N.; Sharma, V.K.; Mishra, R.; Soni, R.S.; Kushwaha, H.S.; Mahajan, S.C.; Kakodkar, A.

    1995-01-01

    Feeder piping consists of 784 number of closely spaced, inter-connected flexible pipes catering for large thermal and creep movements besides seismic and other loadings. The analytical strategy for evolving generic supporting conditions is outlined in this paper. (author). 4 refs., 7 figs

  14. [Generic drugs: good or bad? Physician's knowledge of generic drugs and prescribing habits].

    Science.gov (United States)

    García, A J; Martos, F; Leiva, F; Sánchez de la Cuesta, F

    2003-01-01

    In this article we analyze the responses of 1220 Spanish physicians who participated in a survery about generic drugs. A previously validated questionnaire was sent to physicians through the Spanish Medical Councils of the different provinces. Four items were analyzed: what doctors know about generic drugs (knowledge); physicians' prescribing habits concerning these drugs (attitude and professional competence); how prescription of generic drugs effects pharmaceutical costs amd, finally, what doctors believe a generic drug should be. The influence of physician-related variables (age, type of contract, specialty, workload, etc.) on prescribing of generic drugs was also analyzed. In view of the results, we believe that to rationalize expenditure through and appropriate policy on generic drugs Spanish health authorities should offer more and better training and information (clear and independent) about what generic drugs are.

  15. Generic Local Hamiltonians are Gapless

    Science.gov (United States)

    Movassagh, Ramis

    2017-12-01

    We prove that generic quantum local Hamiltonians are gapless. In fact, we prove that there is a continuous density of states above the ground state. The Hamiltonian can be on a lattice in any spatial dimension or on a graph with a bounded maximum vertex degree. The type of interactions allowed for include translational invariance in a disorder (i.e., probabilistic) sense with some assumptions on the local distributions. Examples include many-body localization and random spin models. We calculate the scaling of the gap with the system's size when the local terms are distributed according to a Gaussian β orthogonal random matrix ensemble. As a corollary, there exist finite size partitions with respect to which the ground state is arbitrarily close to a product state. When the local eigenvalue distribution is discrete, in addition to the lack of an energy gap in the limit, we prove that the ground state has finite size degeneracies. The proofs are simple and constructive. This work excludes the important class of truly translationally invariant Hamiltonians where the local terms are all equal.

  16. Generic physical protection logic trees

    International Nuclear Information System (INIS)

    Paulus, W.K.

    1981-10-01

    Generic physical protection logic trees, designed for application to nuclear facilities and materials, are presented together with a method of qualitative evaluation of the trees for design and analysis of physical protection systems. One or more defense zones are defined where adversaries interact with the physical protection system. Logic trees that are needed to describe the possible scenarios within a defense zone are selected. Elements of a postulated or existing physical protection system are tagged to the primary events of the logic tree. The likelihood of adversary success in overcoming these elements is evaluated on a binary, yes/no basis. The effect of these evaluations is propagated through the logic of each tree to determine whether the adversary is likely to accomplish the end event of the tree. The physical protection system must be highly likely to overcome the adversary before he accomplishes his objective. The evaluation must be conducted for all significant states of the site. Deficiencies uncovered become inputs to redesign and further analysis, closing the loop on the design/analysis cycle

  17. Generic physical protection logic trees

    Energy Technology Data Exchange (ETDEWEB)

    Paulus, W.K.

    1981-10-01

    Generic physical protection logic trees, designed for application to nuclear facilities and materials, are presented together with a method of qualitative evaluation of the trees for design and analysis of physical protection systems. One or more defense zones are defined where adversaries interact with the physical protection system. Logic trees that are needed to describe the possible scenarios within a defense zone are selected. Elements of a postulated or existing physical protection system are tagged to the primary events of the logic tree. The likelihood of adversary success in overcoming these elements is evaluated on a binary, yes/no basis. The effect of these evaluations is propagated through the logic of each tree to determine whether the adversary is likely to accomplish the end event of the tree. The physical protection system must be highly likely to overcome the adversary before he accomplishes his objective. The evaluation must be conducted for all significant states of the site. Deficiencies uncovered become inputs to redesign and further analysis, closing the loop on the design/analysis cycle.

  18. Generic theory for channel sinuosity.

    Science.gov (United States)

    Lazarus, Eli D; Constantine, José Antonio

    2013-05-21

    Sinuous patterns traced by fluid flows are a ubiquitous feature of physical landscapes on Earth, Mars, the volcanic floodplains of the Moon and Venus, and other planetary bodies. Typically discussed as a consequence of migration processes in meandering rivers, sinuosity is also expressed in channel types that show little or no indication of meandering. Sinuosity is sometimes described as "inherited" from a preexisting morphology, which still does not explain where the inherited sinuosity came from. For a phenomenon so universal as sinuosity, existing models of channelized flows do not explain the occurrence of sinuosity in the full variety of settings in which it manifests, or how sinuosity may originate. Here we present a generic theory for sinuous flow patterns in landscapes. Using observations from nature and a numerical model of flow routing, we propose that flow resistance (representing landscape roughness attributable to topography or vegetation density) relative to surface slope exerts a fundamental control on channel sinuosity that is effectively independent of internal flow dynamics. Resistance-dominated surfaces produce channels with higher sinuosity than those of slope-dominated surfaces because increased resistance impedes downslope flow. Not limited to rivers, the hypothesis we explore pertains to sinuosity as a geomorphic pattern. The explanation we propose is inclusive enough to account for a wide variety of sinuous channel types in nature, and can serve as an analytical tool for determining the sinuosity a landscape might support.

  19. Generic adversary characteristics: summary report

    International Nuclear Information System (INIS)

    Stewart, J.B. Jr.; Davidson, J.J.; Jones, H.B.; Fulwiler, C.H.; Mullen, S.A.

    1978-07-01

    The adversaries studied were found to be complex, often unpredictable, and dynamic. The adversary typically goes through a complex decision-making process between the time a potential target is identified and the moment the decision to act is made. This study analyzes the adversary characteristics, and the following conclusions are made: one of the least likely methods of attack is an overt armed assault. Terrorists and psychotics depend upon a high degree of personal dedication. No single generic adversary group or individual exhibits strength in every characteristic. Physical danger appears to have some deterrent effect on all adversaries except the psychotics. Organized and professional criminals often try to recruit insiders. Disoriented persons, white-collar criminals, and disgruntled employees tend to operate as insiders. Professional criminals, many terrorist groups, some extremist protest groups, and certain disoriented persons plan carefully before initiating a criminal mission. Organized crime and miscellaneous criminal adversaries rely on deception and ruse to bypass security. After the decision to commit a crime, the resources deployed by terrorists or organized criminals will be a function of their perception of the operational requirements of the crime. The nature of ''threat'' is dynamic; adversary behavior and capability appear to be related to prevailing political, economic, and social conditions

  20. 78 FR 22553 - Generic Drug Facilities, Sites, and Organizations

    Science.gov (United States)

    2013-04-16

    ...] Generic Drug Facilities, Sites, and Organizations AGENCY: Food and Drug Administration, HHS. ACTION.... Generic drug facilities, certain sites, and organizations identified in a generic drug submission are... active pharmaceutical ingredients and certain other sites and organizations that support the manufacture...

  1. 78 FR 59911 - Generic Information Collection for Land Management Planning

    Science.gov (United States)

    2013-09-30

    ... DEPARTMENT OF AGRICULTURE Forest Service Generic Information Collection for Land Management... organizations on the proposed information collection, Generic Information Collection for Land Management... related to forest management. The intent of this generic information collection request (ICR) is to...

  2. Generic Delivery of Payload of Nanoparticles Intracellularly via Hybrid Polymer Capsules for Bioimaging Applications

    Science.gov (United States)

    Sami, Haider; Maparu, Auhin K.; Kumar, Ashok; Sivakumar, Sri

    2012-01-01

    Towards the goal of development of a generic nanomaterial delivery system and delivery of the ‘as prepared’ nanoparticles without ‘further surface modification’ in a generic way, we have fabricated a hybrid polymer capsule as a delivery vehicle in which nanoparticles are loaded within their cavity. To this end, a generic approach to prepare nanomaterials-loaded polyelectrolyte multilayered (PEM) capsules has been reported, where polystyrene sulfonate (PSS)/polyallylamine hydrochloride (PAH) polymer capsules were employed as nano/microreactors to synthesize variety of nanomaterials (metal nanoparticles; lanthanide doped inorganic nanoparticles; gadolinium based nanoparticles, cadmium based nanoparticles; different shapes of nanoparticles; co-loading of two types of nanoparticles) in their hollow cavity. These nanoparticles-loaded capsules were employed to demonstrate generic delivery of payload of nanoparticles intracellularly (HeLa cells), without the need of individual nanoparticle surface modification. Validation of intracellular internalization of nanoparticles-loaded capsules by HeLa cells was ascertained by confocal laser scanning microscopy. The green emission from Tb3+ was observed after internalization of LaF3:Tb3+(5%) nanoparticles-loaded capsules by HeLa cells, which suggests that nanoparticles in hybrid capsules retain their functionality within the cells. In vitro cytotoxicity studies of these nanoparticles-loaded capsules showed less/no cytotoxicity in comparison to blank capsules or untreated cells, thus offering a way of evading direct contact of nanoparticles with cells because of the presence of biocompatible polymeric shell of capsules. The proposed hybrid delivery system can be potentially developed to avoid a series of biological barriers and deliver multiple cargoes (both simultaneous and individual delivery) without the need of individual cargo design/modification. PMID:22649489

  3. Generic delivery of payload of nanoparticles intracellularly via hybrid polymer capsules for bioimaging applications.

    Directory of Open Access Journals (Sweden)

    Haider Sami

    Full Text Available Towards the goal of development of a generic nanomaterial delivery system and delivery of the 'as prepared' nanoparticles without 'further surface modification' in a generic way, we have fabricated a hybrid polymer capsule as a delivery vehicle in which nanoparticles are loaded within their cavity. To this end, a generic approach to prepare nanomaterials-loaded polyelectrolyte multilayered (PEM capsules has been reported, where polystyrene sulfonate (PSS/polyallylamine hydrochloride (PAH polymer capsules were employed as nano/microreactors to synthesize variety of nanomaterials (metal nanoparticles; lanthanide doped inorganic nanoparticles; gadolinium based nanoparticles, cadmium based nanoparticles; different shapes of nanoparticles; co-loading of two types of nanoparticles in their hollow cavity. These nanoparticles-loaded capsules were employed to demonstrate generic delivery of payload of nanoparticles intracellularly (HeLa cells, without the need of individual nanoparticle surface modification. Validation of intracellular internalization of nanoparticles-loaded capsules by HeLa cells was ascertained by confocal laser scanning microscopy. The green emission from Tb(3+ was observed after internalization of LaF(3:Tb(3+(5% nanoparticles-loaded capsules by HeLa cells, which suggests that nanoparticles in hybrid capsules retain their functionality within the cells. In vitro cytotoxicity studies of these nanoparticles-loaded capsules showed less/no cytotoxicity in comparison to blank capsules or untreated cells, thus offering a way of evading direct contact of nanoparticles with cells because of the presence of biocompatible polymeric shell of capsules. The proposed hybrid delivery system can be potentially developed to avoid a series of biological barriers and deliver multiple cargoes (both simultaneous and individual delivery without the need of individual cargo design/modification.

  4. A multicenter experience with generic tacrolimus conversion.

    Science.gov (United States)

    McDevitt-Potter, Lisa M; Sadaka, Basma; Tichy, Eric M; Rogers, Christin C; Gabardi, Steven

    2011-09-27

    The first generic tacrolimus product gained Food and Drug Administration approval in August 2009. This prospective, observational trial sought to determine the need for dose titrations and measure drug cost savings on conversion to generic tacrolimus. Transplant recipients on stable tacrolimus doses were converted from brand to generic tacrolimus on a mg:mg basis. Data were collected at the time of generic conversion (study arm) and at a time point exactly 6 months before conversion (control arm) for all subjects. Seventy conversions from four centers are reported. Subjects were a mean of 70 months after kidney (n=37), liver (n=28), or multiorgan (n=5) transplant. In the study arm, mean tacrolimus doses were 4.4 and 4.5 mg/d and mean tacrolimus trough concentrations were 5.8 and 5.9 ng/mL before and after conversion, respectively. In the control arm, mean tacrolimus doses were 4.6 and 4.6 mg/d and mean tacrolimus trough concentrations were 6.1 and 5.9 ng/mL before and after the control time point, respectively. Dose titrations occurred in five patients (7%) in the control arm and 15 patients (21%) in the study arm (P=0.028). Mean monthly drug costs were $645 for brand, $593 for generic, and $595 for generic after dose titrations. Mean monthly patient copays were $38 for brand and $15 for generic. These cumulative data show that dose requirements and trough levels are similar between brand and generic tacrolimus and that generic substitution allows for savings. However, postconversion monitoring is prudent as patients may require dose titration.

  5. Generic Penetration of the SSRI Market.

    Science.gov (United States)

    Cascade, Elisa F; Kalali, Amir H

    2008-04-01

    In this article, we investigate the penetration of generic selective serotonin reuptake inhibitors (SSRIs) in the US market and the implications for patient out-of-pocket expense. The data suggest that generic penetration into the SSRI market has grown from approximately nine percent in 2000, the year that the patent for Prozac((R)) expired, to 72 percent in 2007. For December, 2007, the difference in patient out-of-pocket expense for branded vs. generic agents was, on average, $55.42 for patients paying by cash (i.e., they had no prescription drug insurance) and $22.39 for patients with insurance coverage.

  6. Molecularly Imprinted Polymer Technology: A Powerful, Generic ...

    African Journals Online (AJOL)

    Molecularly Imprinted Polymer Technology: A Powerful, Generic, Facile and Cost Effective Alternative for Enantio-recognition and Separation: A Glance at Advances and Applications. ... Tanzania Journal of Science. Journal Home · ABOUT ...

  7. Impacts of Generic Competition and Benefit Management...

    Data.gov (United States)

    U.S. Department of Health & Human Services — According to findings reported in Impacts of Generic Competition and Benefit Management Practices on Spending for Prescription Drugs - Evidence from Medicares Part D...

  8. Brand and generic medications: Are they interchangeable

    International Nuclear Information System (INIS)

    Al-Jazairi, Abdulrazak S.; Blhareth, S.; Eqtefan, Iyad S.; Al-Suwayeh, Saleh A.

    2008-01-01

    Generic substitution has become a common practice since the late 1970s in the United States. At that time, many of these generics caused bioavailability problems, which fueled suspicions about their efficacy and safety and the Food and Drug Administration (FDA) standards for bioequivalence. In Saudi Arabia, the increasing number of local products raised several concerns with regard to switching from brands to generics. Our objective was to review and examine the basis of the controversy surrounding brand and generic interchangeability and to explore a practical approach in pursuing a switch. Articles indexed initially under terms such as generic medications, generic substitution, bioequivalence and bioinequivalence were identified. These terms were used to search the indexing service, MEDLINE (1966-2006). References from the extracted articles and additional data sources, including the Code of Federal Regulations and Regulatory Guidelines from the FDA Center for Drug Evaluation and research were also reviewed. Foe most drugs, bioequivalence testing generally should enable clinicians to routinely substitute generic for innovator products. However, for narrow therapeutic, critical dose drugs, or for highly variable drugs, safe switching between products can not be assured. These drugs need special precautions and blood level monitoring upon switching. FDA firmly believes that approved generic and brand drugs can be dispensed with the full expectation that the consumer will receive the same clinical benefit. Performing the switch process is an advisable practice to reduce health care costs in countries with strong post-marketing surveillance program, but caution is to be exercised when narrow therapeutic index drugs or highly variable drugs are prescribed. (author)

  9. Generic medicine and prescribing: A quick assessment

    Directory of Open Access Journals (Sweden)

    Mainul Haque

    2017-01-01

    Full Text Available Generic drugs are copies of brand-name drugs that have exactly the same dosage, intended use, effects, side effects, route of administration, risks, safety, and strength as the original drug. In other words, their pharmacological effects are exactly the same as those of their brand-name counterparts. The Food and Drug Administration (FDA describes that generic drugs are essential possibilities that allow better access to healthcare for all Americans. They are replicas of brand-name drugs and are the identical as those of brand-name drugs in dosage form, safety, strength, route of administration, quality, performance features, and anticipated to use. Healthcare authorities and users can be guaranteed that FDA-approved generic drug products have met the same stiff principles as the innovator drug. The company that made Bayer aspirin fought in court enthusiastically to keep generic versions off the shelves, in the 1920s. The company lost in court, and consumers suddenly had an array of choices in generic aspirin. The Supreme Court of India uttering ‘the Supreme Court's ruling will prevent companies from further seeking unwarranted patents on HIV and other essential medicines.’ Generic medicine cannot be sold at a price higher than the branded medicine, so it is regularly a low-priced option. Thereafter, both the end user and the government who pay for part of the price of the medicine under the Pharmaceutical Benefits Scheme in Australia are benefitted. The treatment of diseases using essential drugs, prescribed by their generic names, has been emphasised by the WHO and many national health policies. Although there are some improvements in generic medicine prescribing, it has been advised by the WHO that ‘countries should intensify efforts to measure and regularly monitor medicine prices and availability, and adopt policy measures to address the issues identified.’

  10. Sharing, samples, and generics: an antitrust framework.

    Science.gov (United States)

    Carrier, Michael A

    Rising drug prices are in the news. By increasing price, drug companies have placed vital, even life-saving, medicines out of the reach of consumers. In a recent development, brand firms have prevented generics even from entering the market. The ruse for this strategy involves risk-management programs known as Risk Evaluation and Mitigation Strategies ("REMS"). Pursuant to legislation enacted in 2007, the FDA requires REMS when a drug's risks (such as death or injury) outweigh its rewards. Brands have used this regime, intended to bring drugs to the market, to block generic competition. Regulations such as the federal Hatch-Waxman Act and state substitution laws foster widespread generic competition. But these regimes can only be effectuated through generic entry. And that entry can take place only if a generic can use a brand's sample to show that its product is equivalent. More than 100 generic firms have complained that they have not been able to access needed samples. One study of 40 drugs subject to restricted access programs found that generics' inability to enter cost more than $5 billion a year. Brand firms have contended that antitrust law does not compel them to deal with their competitors and have highlighted concerns related to safety and product liability in justifying their refusals. This Article rebuts these claims. It highlights the importance of samples in the regulatory regime and the FDA's inability to address the issue. It shows how a sharing requirement in this setting is consistent with Supreme Court caselaw. And it demonstrates that the brands' behavior fails the defendant-friendly "no economic sense" test because the conduct literally makes no sense other than by harming generics. Brands' denial of samples offers a textbook case of monopolization. In the universe of pharmaceutical antitrust behavior, other conduct--such as "pay for delay" settlements between brands and generics and "product hopping" from one drug to a slightly modified

  11. 42 CFR 447.506 - Authorized generic drugs.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 4 2010-10-01 2010-10-01 false Authorized generic drugs. 447.506 Section 447.506... (CONTINUED) MEDICAL ASSISTANCE PROGRAMS PAYMENTS FOR SERVICES Payment for Drugs § 447.506 Authorized generic drugs. (a) Authorized generic drug defined. For the purposes of this subpart, an authorized generic drug...

  12. 76 FR 54507 - Proposed Generic Communication; Draft NRC Generic Letter 2011-XX: Seismic Risk Evaluations for...

    Science.gov (United States)

    2011-09-01

    ... NUCLEAR REGULATORY COMMISSION [NRC-2011-0204] Proposed Generic Communication; Draft NRC Generic... functions. SSCs in operating nuclear power plants are designed either in accordance with, or have been... nuclear reactors. The background information relevant to this GL includes the individual plant...

  13. [Analysis of generic drug supply in France].

    Science.gov (United States)

    Taboulet, F; Haramburu, F; Latry, Ph

    2003-09-01

    The list of generic medicines (LGM), published since 1997 by the Agence Française de Sécurité Sanitaire des Produits de Santé (AFFSSaPS), the French Medicine Agency, concerns a special part of the medicines reimbursed by the National Health Insurance (Social Security). The objectives of the present study were: i) to describe the components of this list, based on pharmaceutical, economical and therapeutic characteristics, ii) to study differences between generic and reference products (formulations, excipients, prices, etc.), iii) to analyze information on excipients provided to health care professionals. The 21st version of the LGM (April 2001) was used. Therapeutic value was retrieved from the 2001 AFSSaPS report on the therapeutic value of 4490 reimbursed medicines. Information on excipients in the LGM and the Vidal dictionary (reference prescription book in France) was compared. The products included in the LGM represent 20% of all reimbursed medicines. The mean price differences between generics and their reference products vary between 30 and 50% for more than two thirds of the generic groups. The therapeutic value of the products of the LGM was judged important in 71% of cases (vs 63% for the 4409 assessed medicines) and insufficient in 13% of cases (vs 19%). Information on excipients is often missing and sometimes erroneous. Although the LGM is regularly revised and thus the generic market in perpetual change, the 2001 cross description of this pharmaceutical market provides much informations and raises some concern.

  14. Generic simplified simulation model for DFIG with active crowbar

    Energy Technology Data Exchange (ETDEWEB)

    Buendia, Francisco Jimenez [Gamesa Innovation and Technology, Sarriguren, Navarra (Spain). Technology Dept.; Barrasa Gordo, Borja [Assystem Iberia, Bilbao, Vizcaya (Spain)

    2012-07-01

    Simplified models for transient stability studies are a general requirement for transmission system operators to wind turbine (WTG) manufacturers. Those models must represent the performance of the WTGs for transient stability studies, mainly voltage dips originated by short circuits in the electrical network. Those models are implemented in simulation software as PSS/E, DigSilent or PSLF. Those software platforms allow simulation of transients in large electrical networks with thousands of busses, generators and loads. The high complexity of the grid requires that the models inserted into the grid should be simplified in order to allow the simulations being executed as fast as possible. The development of a model which is simplified enough to be integrated in those complex grids and represent the performance of WTG is a challenge. The IEC TC88 working group has developed generic models for different types of generators, among others for WTGs using doubly fed induction generators (DFIG). This paper will focus in an extension of the models for DFIG WTGs developed in IEC in order to be able to represent the simplified model of DFIG with an active crowbar, which is required to withstand voltage dips without disconnecting from the grid. This paper improves current generic model of Type 3 for DFIG adding a simplified version of the generator including crowbar functionality and a simplified version of the crowbar firing. In addition, this simplified model is validated by correlation with voltage dip field test from a real wind turbine. (orig.)

  15. Modeling of ultrasonic processes utilizing a generic software framework

    Science.gov (United States)

    Bruns, P.; Twiefel, J.; Wallaschek, J.

    2017-06-01

    Modeling of ultrasonic processes is typically characterized by a high degree of complexity. Different domains and size scales must be regarded, so that it is rather difficult to build up a single detailed overall model. Developing partial models is a common approach to overcome this difficulty. In this paper a generic but simple software framework is presented which allows to coupe arbitrary partial models by slave modules with well-defined interfaces and a master module for coordination. Two examples are given to present the developed framework. The first one is the parameterization of a load model for ultrasonically-induced cavitation. The piezoelectric oscillator, its mounting, and the process load are described individually by partial models. These partial models then are coupled using the framework. The load model is composed of spring-damper-elements which are parameterized by experimental results. In the second example, the ideal mounting position for an oscillator utilized in ultrasonic assisted machining of stone is determined. Partial models for the ultrasonic oscillator, its mounting, the simplified contact process, and the workpiece’s material characteristics are presented. For both applications input and output variables are defined to meet the requirements of the framework’s interface.

  16. Generic 12-Bus Test System for Wind Power Integration Studies

    DEFF Research Database (Denmark)

    Adamczyk, Andrzej Grzegorz; Altin, Müfit; Göksu, Ömer

    2012-01-01

    , inertial response, frequency control, damping of electromechanical oscillations, balanced and unbalanced fault management, etc. Hence, the power system components: conventional power plants with controls, transmission lines, transformers and loads should be represented accurately to achieve realistic power......High wind power penetration levels into power systems requires an appropriate power system model when assessing impact on the overall system stability. The model should capture the wide range of dynamics related to the wind integration studies, such as voltage control, synchronizing power control...... system characteristics. Additionally, the power system model should be simple and computationally manageable in order to simulate multiple scenarios with different control parameters in a reasonable time. In this paper, a generic power system model is presented in order to comprehend the wind integration...

  17. A generic double-curvature piezoelectric shell energy harvester: Linear/nonlinear theory and applications

    Science.gov (United States)

    Zhang, X. F.; Hu, S. D.; Tzou, H. S.

    2014-12-01

    Converting vibration energy to useful electric energy has attracted much attention in recent years. Based on the electromechanical coupling of piezoelectricity, distributed piezoelectric zero-curvature type (e.g., beams and plates) energy harvesters have been proposed and evaluated. The objective of this study is to develop a generic linear and nonlinear piezoelectric shell energy harvesting theory based on a double-curvature shell. The generic piezoelectric shell energy harvester consists of an elastic double-curvature shell and piezoelectric patches laminated on its surface(s). With a current model in the closed-circuit condition, output voltages and energies across a resistive load are evaluated when the shell is subjected to harmonic excitations. Steady-state voltage and power outputs across the resistive load are calculated at resonance for each shell mode. The piezoelectric shell energy harvesting mechanism can be simplified to shell (e.g., cylindrical, conical, spherical, paraboloidal, etc.) and non-shell (beam, plate, ring, arch, etc.) distributed harvesters using two Lamé parameters and two curvature radii of the selected harvester geometry. To demonstrate the utility and simplification procedures, the generic linear/nonlinear shell energy harvester mechanism is simplified to three specific structures, i.e., a cantilever beam case, a circular ring case and a conical shell case. Results show the versatility of the generic linear/nonlinear shell energy harvesting mechanism and the validity of the simplification procedures.

  18. Mixed WTO ruling on generic drug development.

    Science.gov (United States)

    Elliott, R

    2000-01-01

    On 17 March 2000, the World Trade Organization upheld the provision in Canada's patent laws that allows generic drug manufacturers to develop (but not sell) their cheaper versions of patented medicines before the 20-year patients expire. The decision prevents pharmaceutical companies from enjoying market monopolies beyond their patent terms, avoiding what would otherwise be even lengthier delays in the sale of cheaper, generic drugs in Canada. This decision is of significance not only to Canada, but also to other WTO member countries and to all individuals who use pharmaceutical products. However, the decision is not all positive: the WTO also ruled that Canada is violating international agreements by letting generic manufacturers stockpile their versions of patented drugs before patents expire. This article explains the issues, the arguments, and the decision.

  19. Benefits of Digital Equipment Generic Qualification Activities

    International Nuclear Information System (INIS)

    Thomas, James E.; Steiman, Samuel C.

    2002-01-01

    As a result of nuclear power plant instrumentation and control obsolescence issues, there have been numerous activities during recent years relating to the qualification of digital equipment. Some of these activities have been 'generic' in nature in that the qualification was not limited to plant specific applications, but was intended to cover a broad base of potential applications of the digital equipment. These generic qualifications have been funded by equipment manufacturers and by utility groups and organizations. The generic activities sponsored by the Electric Power Research Institute (EPRI) have been pilot projects for an overall generic qualification approach. The primary benefit resulting from the generic qualification work to date is that a number of digital platforms and digital devices are now available for use in various nuclear safety-related applications. Many of the tests and evaluations necessary to support plant specific applications have been completed. The amount of data and documentation that each utility must develop on a case by case basis has been significantly reduced. There are also a number of additional benefits resulting from these industry efforts. The challenges and difficulties in qualifying digital equipment for safety-related applications are now more clearly understood. EPRI has published a lessons learned document (EPRI Report 1001452, Generic Qualification of Commercial Grade Digital Devices: Lessons Learned from Initial Pilots, which covers several different qualification areas, including device selection, project planning, vendor surveys and design reviews, and electromagnetic compatibility (EMC) qualification. Application of the experience and lessons learned from the EPRI pilot activities should help reduce the effort and cost required for future qualification work. Most generic qualification activities for commercial equipment have been conducted using the approach of EPRI TR-106439, Guideline on Evaluation and Acceptance

  20. Generic tacrolimus in solid organ transplantation

    DEFF Research Database (Denmark)

    Taube, D; Jones, G; O'Beirne, J

    2014-01-01

    The availability of a wide range of immunosuppressive therapies has revolutionized the management of patients who have undergone solid organ transplantation (SOT). However, the cost of immunosuppressive drugs remains high. This situation has led to the development of generic equivalents, which...... innovator tacrolimus drug (Prograf) in both healthy volunteers and kidney transplant patients. Clinical experience with this generic tacrolimus formulation has also been established in both de novo and conversion patients who have undergone kidney and liver transplantation, as well as in conversion of other...

  1. The SENSEI Generic In Situ Interface

    Energy Technology Data Exchange (ETDEWEB)

    Ayachit, Utkarsh [Kitware, Inc., Clifton Park, NY (United States); Whitlock, Brad [Intelligent Light, Rutherford, NJ (United States); Wolf, Matthew [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Loring, Burlen [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Geveci, Berk [Kitware, Inc., Clifton Park, NY (United States); Lonie, David [Kitware, Inc., Clifton Park, NY (United States); Bethel, E. Wes [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2017-04-11

    The SENSEI generic in situ interface is an API that promotes code portability and reusability. From the simulation view, a developer can instrument their code with the SENSEI API and then make make use of any number of in situ infrastructures. From the method view, a developer can write an in situ method using the SENSEI API, then expect it to run in any number of in situ infrastructures, or be invoked directly from a simulation code, with little or no modification. This paper presents the design principles underlying the SENSEI generic interface, along with some simplified coding examples.

  2. Generic magnetic fusion reactor cost assessment

    International Nuclear Information System (INIS)

    Sheffield, J.

    1985-01-01

    The Fusion Energy Division of the Oak Ridge National Laboratory discusses ''generic'' magnetic fusion reactors. The author comments on DT burning magnetic fusion reactor models being possibly operational in the 21st century. Representative parameters from D-T reactor studies are given, as well as a shematic diagram of a generic fusion reactor. Values are given for winding pack current density for existing and future superconducting coils. Topics included are the variation of the cost of electricity (COE), the dependence of the COE on the net electric power of the reactor, and COE formula definitions

  3. Associations between generic substitution and patients' attitudes, beliefs and experience

    DEFF Research Database (Denmark)

    Østergaard Rathe, Jette; Larsen, Pia Veldt; Andersen, Morten

    2013-01-01

    Abstract Background Generic substitution has been implemented in many countries, but knowledge about patients’ attitudes, beliefs and experiences is still sparse. Aim To assess associations between generic switching and patients’ attitudes, beliefs and experiences with previous generic switching...... on generic medicine and confidence in the healthcare system. Only prescriptions issued by the general practitioners were included. For each patient we focused on one purchase of a generically substitutable drug (index drug). Patients were identified by means of a dispensing database. Results Earlier generic...... switches within the index ATC code were statistically significantly associated with experience of a generic switch (adjusted OR 5.93 95% CI 4.70; 7.49). Having had more than 5 earlier switches within other ATC codes and having negative views on generic medicines reduced the odds of experiencing a generic...

  4. Towards Generic Interaction Styles for Product Design

    DEFF Research Database (Denmark)

    Buur, Jacob; Stienstra, Marcelle

    2008-01-01

    a wider range of interactive products. In this paper we report on five years of continued research into interaction styles for telephones, kitchen equipment, HiFi products and medical devices, and we show how it is indeed possible and beneficial to formulate a set of generic interaction styles....

  5. Crystallization Kinetics within a Generic Modelling Framework

    DEFF Research Database (Denmark)

    Meisler, Kresten Troelstrup; von Solms, Nicolas; Gernaey, Krist

    2013-01-01

    An existing generic modelling framework has been expanded with tools for kinetic model analysis. The analysis of kinetics is carried out within the framework where kinetic constitutive models are collected, analysed and utilized for the simulation of crystallization operations. A modelling...... procedure is proposed to gain the information of crystallization operation kinetic model analysis and utilize this for faster evaluation of crystallization operations....

  6. Baldrige Theory into Practice: A Generic Model

    Science.gov (United States)

    Arif, Mohammed

    2007-01-01

    Purpose: The education system globally has moved from a push-based or producer-centric system to a pull-based or customer centric system. Malcolm Baldrige Quality Award (MBQA) model happens to be one of the latest additions to the pull based models. The purpose of this paper is to develop a generic framework for MBQA that can be used by…

  7. Generic Checklist for Day Care Monitoring.

    Science.gov (United States)

    Children's Services Monitoring Transfer Consortium.

    This guide presents the results of research on day care monitoring methods conducted by the Children's Services Monitoring Transfer Consortium. It suggests a set of generic predictor items that can be used to monitor day care providers' compliance with standards. The predictor items are at the licensing or minimal compliance level and have been…

  8. Climate Change: Generic Implications for Agriculture

    Indian Academy of Sciences (India)

    Climate Change: Generic Implications for Agriculture. Increasing carbon dioxide: Good for most crops. Increase in mean temperature: orter ... Increasing rainfall intensity and dry days- more floods and droughts: Higher production variability. Himalayan glaciers to recede: irrigation in IGP gradually becomes less dependable ...

  9. A Generic Solution Approach to Nurse Rostering

    DEFF Research Database (Denmark)

    Hansen, Anders Dohn; Mason, Andrew; Ryan, David

    In this report, we present a solution approach to the nurse rostering problem. The problem is defined by a generic model that is able to capture close to all of the problem characteristics that we have seen in the literature and in the realistic problems at hand. The model is used directly in the...

  10. The Generic Style Rules for Linguistics

    OpenAIRE

    Haspelmath, Martin

    2014-01-01

    The Generic Style Rules for Linguistics provide a style sheet that can be used by any linguistics journal or edited book, or for teaching purposes. They regulate aspects of text-structure style such as typographic highlighting, citation style, use of capitalization, and bibliographic style (based on the LSA's Unified Stylesheet for linguistics).

  11. Generic hyper-diversity in Stachybotriaceae

    Czech Academy of Sciences Publication Activity Database

    Lombard, L.; Houbraken, J.; Decock, C.; Samson, R.A.; Meijer, M.; Réblová, Martina; Groenewald, J.Z.; Crous, P. W.

    2016-01-01

    Roč. 36, SI Jun (2016), s. 156-246 ISSN 0031-5850 R&D Projects: GA ČR GAP506/12/0038 Institutional support: RVO:67985939 Keywords : biodegraders * generic concept * human and plant pathogens Subject RIV: EF - Botanics Impact factor: 7.511, year: 2016

  12. Generic Principles for Resolving Intergroup Conflict.

    Science.gov (United States)

    Fisher, Ronald J.

    1994-01-01

    Provides an initial statement of generic principles deemed effective for addressing protracted social conflicts between identity groups. These principles are compatible with certain values for societal organization and approaches to social change, raising questions of value differences between intervenors and the host culture(s). Three case…

  13. Intermediates and Generic Convergence to Equilibria

    DEFF Research Database (Denmark)

    Marcondes de Freitas, Michael; Wiuf, Carsten; Feliu, Elisenda

    2017-01-01

    Known graphical conditions for the generic and global convergence to equilibria of the dynamical system arising from a reaction network are shown to be invariant under the so-called successive removal of intermediates, a systematic procedure to simplify the network, making the graphical conditions...

  14. Generic Certificates. Agricultural Economic Report Number 594.

    Science.gov (United States)

    Glauber, Joseph W.

    The Food Security Act of 1985 authorizes the U.S. Department of Agriculture to issue generic certificates in lieu of cash payments due to program participants and merchants of agricultural products under provisions of several programs. The certificates may be used to acquire stocks held as collateral on government loans or owned by the Commodity…

  15. Load forecasting

    International Nuclear Information System (INIS)

    Mak, H.

    1995-01-01

    Slides used in a presentation at The Power of Change Conference in Vancouver, BC in April 1995 about the changing needs for load forecasting were presented. Technological innovations and population increase were said to be the prime driving forces behind the changing needs in load forecasting. Structural changes, market place changes, electricity supply planning changes, and changes in planning objectives were other factors discussed. It was concluded that load forecasting was a form of information gathering, that provided important market intelligence

  16. Comparison of adherence to generic multi-tablet regimens vs. brand multi-tablet and brand single-tablet regimens likely to incorporate generic antiretroviral drugs by breaking or not fixed-dose combinations in HIV-infected patients.

    Science.gov (United States)

    Rwagitinywa, Joseph; Lapeyre-Mestre, Maryse; Bourrel, Robert; Montastruc, Jean-Louis; Sommet, Agnès

    2018-03-05

    Adherence to antiretroviral (ARV) is crucial to achieve viral load suppression in HIV-infected patients. This study aimed to compare adherence to generic multi-tablet regimens (MTR) vs. brand MTR likely to incorporate ARV drugs without breaking fixed-dose combinations (FDC) and brand single-tablet regimens (STR) likely to incorporate generics by breaking the FDC. Patients aged of 18 years or over exposed to one of the generic or the brand of lamivudine (3TC), zidovudine/lamivudine (AZT/TC), nevirapine (NVP), or efavirenz (EFV), or the brand STR of efavirenz/emtricitabine/tenofovir (EFV/FTC/TDF). Adherence was measured by medication possession ratio (MPR) using both defined daily dose (DDD) and daily number of tablet recommended for adults (DNT). Adherence to generic MTR vs. brand MTR and brand STR was compared using Kruskal-Wallis. The overall median adherence was 0.97 (IQR 0.13) by DNT method and 0.97 (0.14) by DDD method. Adherence in patients exposed to generic MTR (n = 165) vs. brand MTR (n = 481) and brand STR (n = 470) was comparable by DNT and DDD methods. In conclusion, adherence to generic MTR was high and comparable with adherence to brand MTR and to STR. Utilization of DDD instead DNT to measure the MPR led to small but nonsignificant difference that has no clinical impact. © 2018 Société Française de Pharmacologie et de Thérapeutique.

  17. Generic penetration in the retail atypical antipsychotic market.

    Science.gov (United States)

    Lenderts, Susan; Kalali, Amir H; Buckley, Peter

    2010-03-01

    In this article, we explore the penetration of generic atypical antipsychotics in the United States market before and after the availability of generic risperidone in July 2008. Analysis suggests that, overall, generic penetration into the atypical antipsychotic market has grown from approximately three percent in January 2008 to more than 25 percent in December 2009. Similar trends are uncovered when branded and generic prescriptions are analyzed by specialty.

  18. 40 CFR 721.9973 - Zirconium dichlorides (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Zirconium dichlorides (generic). 721... Substances § 721.9973 Zirconium dichlorides (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substances identified generically as zirconium dichlorides (PMNs P...

  19. 40 CFR 721.2083 - Polysubstituted carbomonocyclic hydroxylamine (generic).

    Science.gov (United States)

    2010-07-01

    ... hydroxylamine (generic). 721.2083 Section 721.2083 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.2083 Polysubstituted carbomonocyclic hydroxylamine (generic). (a... generically as a polysubstituted carbomonocyclic hydroxylamine (PMN P-97-878) is subject to reporting under...

  20. 40 CFR 721.5350 - Substituted nitrile (generic name).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Substituted nitrile (generic name... Substances § 721.5350 Substituted nitrile (generic name). (a) Chemical substances and significant new uses subject to reporting. (1) The chemical substance identified generically as a substituted nitrile (PMN P-83...

  1. 40 CFR 721.555 - Alkyl amino nitriles (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Alkyl amino nitriles (generic). 721... Substances § 721.555 Alkyl amino nitriles (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substances identified generically as alkyl amino nitriles (PMNs P-96...

  2. A developmental analysis of generic nouns in Southern Peruvian Quechua.

    Science.gov (United States)

    Mannheim, Bruce; Gelman, Susan A; Escalante, Carmen; Huayhua, Margarita; Puma, Rosalía

    2010-01-01

    Generic noun phrases (e.g., "Cats like to drink milk") are a primary means by which adults express generalizations to children, yet they pose a challenging induction puzzle for learners. Although prior research has established that English speakers understand and produce generic noun phrases by preschool age, little is known regarding the cross-cultural generality of generic acquisition. Southern Peruvian Quechua provides a valuable comparison because, unlike English, it is a highly inflected language in which generics are marked by the absence rather than the presence of any linguistic markers. Moreover, Quechua is spoken in a cultural context that differs markedly from the highly educated, middle-class contexts within which earlier research on generics was conducted. We presented participants from 5 age groups (3-6, 7-9, 10-12, 14-35, and 36-90 years of age) with two tasks that examined the ability to distinguish generic from non-generic utterances. In Study 1, even the youngest children understood generics as applying broadly to a category (like "all") and distinct from indefinite reference ("some"). However, there was a developmental lag before children understood that generics, unlike "all", can include exceptions. Study 2 revealed that generic interpretations are more frequent for utterances that (a) lack specifying markers and (b) are animate. Altogether, generic interpretations are found among the youngest participants, and may be a default mode of quantification. These data demonstrate the cross-cultural importance of generic information in linguistic expression.

  3. 40 CFR 721.9959 - Polyurethane polymer (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Polyurethane polymer (generic). 721... Substances § 721.9959 Polyurethane polymer (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as a polyurethane polymer (PMN P-01...

  4. 40 CFR 721.324 - Alkoxylated acrylate polymer (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Alkoxylated acrylate polymer (generic... Substances § 721.324 Alkoxylated acrylate polymer (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as alkoxylated acrylate polymer...

  5. [The patents game. Generic and biosimilar drugs].

    Science.gov (United States)

    Villamañán, E; González, D; Armada, E; Ruano, M; Álvarez-Sala, R; Herrero, A

    2016-01-01

    The protection provided by patents on medicines has a limited duration. The expiry of patents expiration allows copies of the drugs to be released, competing with original. At first, they were identical to the original, known as generic drugs, but in recent years, due to the marketing of biological therapies and the expiry of many of their patents, biosimilar drugs have also emerged. These are not exact copies of the original, but, like generic drugs, biosimilar drugs have to demonstrate equivalence to the reference drugs in quality, safety and efficacy. Nevertheless, despite their importance and contribution to sustainability of health system, doctors are sometimes unaware of differences between them, and their impact in terms of clinical and economic effects. An attempt is made to review and clarify certain aspects often unknown by physicians, despite their involvement in their use. Copyright © 2015 SECA. Published by Elsevier Espana. All rights reserved.

  6. Generic Structure Potential of Christian Apologetics

    Directory of Open Access Journals (Sweden)

    Onwu Inya

    2012-01-01

    Full Text Available Religious texts have been examined by scholars from different theoretical standpoints. However, a close survey of the literature reveals that little attention has been paid to Christian apologetics from a linguistic perspective. Also, an examination of studies along the lines of Generic Structure Potential (henceforth GSP shows that the genre status of Christian apologetics has not been indicated. This gap provides the motivation for this paper, which investigates the GSP of Christian apologetics. Twenty texts written by various key contemporary apologetic writers were purposively selected for the study. The following generic structure potential catalogue was generated:The paper reveals that the elements of the GSP concertedly work to advance, argue for or defend the Christian belief system. The paper also suggests that the model could be applied to other forms of apologetic instances.

  7. Generic Sensor Failure Modeling for Cooperative Systems

    Science.gov (United States)

    Jäger, Georg; Zug, Sebastian

    2018-01-01

    The advent of cooperative systems entails a dynamic composition of their components. As this contrasts current, statically composed systems, new approaches for maintaining their safety are required. In that endeavor, we propose an integration step that evaluates the failure model of shared information in relation to an application’s fault tolerance and thereby promises maintainability of such system’s safety. However, it also poses new requirements on failure models, which are not fulfilled by state-of-the-art approaches. Consequently, this work presents a mathematically defined generic failure model as well as a processing chain for automatically extracting such failure models from empirical data. By examining data of an Sharp GP2D12 distance sensor, we show that the generic failure model not only fulfills the predefined requirements, but also models failure characteristics appropriately when compared to traditional techniques. PMID:29558435

  8. An Internet of Things Generic Reference Architecture

    DEFF Research Database (Denmark)

    Bhalerao, Dipashree M.; Riaz, Tahir; Madsen, Ole Brun

    2013-01-01

    Internet of things Network is a future application of Internet. This network has three major basic blocks as business process or Application, core network or internetwork and peripheral network as Things or objects. The assembly has the basic intention of connecting all physical and virtual things......, and keeping track of all these things for monitoring and controlling some information. IoT architecture is studied from software architecture, overall system architecture and network architecture point of view. Paper puts forward the requirements of software architecture along with, its component...... and deployment diagram, process and interface diagram at abstract level. Paper proposes the abstract generic IoT reference and concrete abstract generic IoT reference architectures. Network architecture is also put up as a state of the art. Paper shortly gives overviews of protocols used for IoT. Some...

  9. U.S. NRC's generic issues program

    International Nuclear Information System (INIS)

    Kauffman, J.V.; Foster, J.W.

    2008-01-01

    The United States Nuclear Regulatory Commission (NRC) has a Generic Issues Program (GIP) to address Generic Issues (GI). A GI is defined as 'a regulatory matter involving the design, construction, operation, or decommissioning of several, or a class of, NRC licensees or certificate holders that is not sufficiently addressed by existing rules, guidance, or programs'. This rather legalistic definition has several practical corollaries: First, a GI must involve safety. Second, the issue must involve at least two plants, or it would be a plant-specific issue rather than a GI. Third, the potential safety question must not be covered by existing regulations and guidance (compliance). Thus, the effect of a GI is to potentially change the body of regulations and associated guidance (e.g., regulatory guides). The GIP was started in 1976, thus it is a relatively mature program. Approximately 850 issues have been processed by the program to date. More importantly, even after 30 years, new GIs continue to be proposed. The entire set of Generic Issues (GIs) is updated annually in NUREG-0933, 'A Prioritization of Generic Safety Issues'. GIs normally involve complex questions of safety and regulation. Efficient and effective means of addressing these issues are very important for regulatory effectiveness. If an issue proves to pose a genuine, significant safety question, then swift, effective, enforceable, and cost-effective action needs to be taken. Conversely, if an issue is of little safety significance, the issue should be dismissed in an expeditious manner, avoiding unnecessary expenditure of resources and regulatory burden or uncertainty. This paper provides a summary of the 5-stage program, from identification through the regulatory assessment stage. The paper also includes a discussion of the program's seven criteria, sources of proposed GIs, recent improvements, publicly available information, historical performance, and status of current GIs. (authors)

  10. Molten salts processes and generic simulation

    International Nuclear Information System (INIS)

    Ogawa, Toru; Minato, Kazuo

    2001-01-01

    Development of dry separation process (pyrochemical process) using molten salts for the application of spent-nuclear fuel reprocessing requires a rather complete fundamental database as well as process simulation technique with wide applicability. The present report concerns recent progress and problems in this field taking behaviors of co-electrodeposition of UO 2 and PuO 2 in molten salts as an example, and using analytical simulation of local equilibrium combined with generic diffusion. (S. Ohno)

  11. Savannah River Site generic data base development

    International Nuclear Information System (INIS)

    Blanchard, A.

    2000-01-01

    This report describes the results of a project to improve the generic component failure database for the Savannah River Site (SRS). Additionally, guidelines were developed further for more advanced applications of database values. A representative list of components and failure modes for SRS risk models was generated by reviewing existing safety analyses and component failure data bases and from suggestions from SRS safety analysts. Then sources of data or failure rate estimates were identified and reviewed for applicability. A major source of information was the Nuclear Computerized Library for Assessing Reactor Reliability, or NUCLARR. This source includes an extensive collection of failure data and failure rate estimates for commercial nuclear power plants. A recent Idaho National Engineering Laboratory report on failure data from the Idaho Chemical Processing Plant was also reviewed. From these and other recent sources, failure data and failure rate estimates were collected for the components and failure modes of interest. For each component failure mode, this information was aggregated to obtain a recommended generic failure rate distribution (mean and error factor based on a lognormal distribution). Results are presented in a table in this report. A major difference between generic database and previous efforts is that this effort estimates failure rates based on actual data (failure events) rather than on existing failure rate estimates. This effort was successful in that over 75% of the results are now based on actual data. Also included is a section on guidelines for more advanced applications of failure rate data. This report describes the results of a project to improve the generic component failure database for the Savannah River site (SRS). Additionally, guidelines were developed further for more advanced applications of database values

  12. Molten salts processes and generic simulation

    Energy Technology Data Exchange (ETDEWEB)

    Ogawa, Toru; Minato, Kazuo [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2001-12-01

    Development of dry separation process (pyrochemical process) using molten salts for the application of spent-nuclear fuel reprocessing requires a rather complete fundamental database as well as process simulation technique with wide applicability. The present report concerns recent progress and problems in this field taking behaviors of co-electrodeposition of UO{sub 2} and PuO{sub 2} in molten salts as an example, and using analytical simulation of local equilibrium combined with generic diffusion. (S. Ohno)

  13. Agricultural Market Structure, Generic Advertising, and Welfare

    OpenAIRE

    Cardon, James H.; Pope, Rulon D.

    2003-01-01

    This analysis begins with a definition and discussion of productive advertising. Then, following Dixit and Norman, persuasive advertising is used to study the welfare effects of generic advertising by marketing orders. The study first examines horizontal competition when the competing advertiser is a monopoly, and results show that the socially optimal level of advertising for a competitive marketing order is positive only if advertising raises monopoly output. Next, advertising choices of a ...

  14. Performance Assessments of Generic Nuclear Waste Repositories in Shale

    Science.gov (United States)

    Stein, E. R.; Sevougian, S. D.; Mariner, P. E.; Hammond, G. E.; Frederick, J.

    2017-12-01

    Simulations of deep geologic disposal of nuclear waste in a generic shale formation showcase Geologic Disposal Safety Assessment (GDSA) Framework, a toolkit for repository performance assessment (PA) whose capabilities include domain discretization (Cubit), multiphysics simulations (PFLOTRAN), uncertainty and sensitivity analysis (Dakota), and visualization (Paraview). GDSA Framework is used to conduct PAs of two generic repositories in shale. The first considers the disposal of 22,000 metric tons heavy metal of commercial spent nuclear fuel. The second considers disposal of defense-related spent nuclear fuel and high level waste. Each PA accounts for the thermal load and radionuclide inventory of applicable waste types, components of the engineered barrier system, and components of the natural barrier system including the host rock shale and underlying and overlying stratigraphic units. Model domains are half-symmetry, gridded with Cubit, and contain between 7 and 22 million grid cells. Grid refinement captures the detail of individual waste packages, emplacement drifts, access drifts, and shafts. Simulations are run in a high performance computing environment on as many as 2048 processes. Equations describing coupled heat and fluid flow and reactive transport are solved with PFLOTRAN, an open-source, massively parallel multiphase flow and reactive transport code. Additional simulated processes include waste package degradation, waste form dissolution, radioactive decay and ingrowth, sorption, solubility, advection, dispersion, and diffusion. Simulations are run to 106 y, and radionuclide concentrations are observed within aquifers at a point approximately 5 km downgradient of the repository. Dakota is used to sample likely ranges of input parameters including waste form and waste package degradation rates and properties of engineered and natural materials to quantify uncertainty in predicted concentrations and sensitivity to input parameters. Sandia National

  15. Generic superweak chaos induced by Hall effect

    Science.gov (United States)

    Ben-Harush, Moti; Dana, Itzhack

    2016-05-01

    We introduce and study the "kicked Hall system" (KHS), i.e., charged particles periodically kicked in the presence of uniform magnetic (B ) and electric (E ) fields that are perpendicular to each other and to the kicking direction. We show that for resonant values of B and E and in the weak-chaos regime of sufficiently small nonintegrability parameter κ (the kicking strength), there exists a generic family of periodic kicking potentials for which the Hall effect from B and E significantly suppresses the weak chaos, replacing it by "superweak" chaos (SWC). This means that the system behaves as if the kicking strength were κ2 rather than κ . For E =0 , SWC is known to be a classical fingerprint of quantum antiresonance, but it occurs under much less generic conditions, in particular only for very special kicking potentials. Manifestations of SWC are a decrease in the instability of periodic orbits and a narrowing of the chaotic layers, relative to the ordinary weak-chaos case. Also, for global SWC, taking place on an infinite "stochastic web" in phase space, the chaotic diffusion on the web is much slower than the weak-chaos one. Thus, the Hall effect can be relatively stabilizing for small κ . In some special cases, the effect is shown to cause ballistic motion for almost all parameter values. The generic global SWC on stochastic webs in the KHS appears to be the two-dimensional closest analog to the Arnol'd web in higher dimensional systems.

  16. Generic legislation of new psychoactive drugs.

    Science.gov (United States)

    van Amsterdam, Jan; Nutt, David; van den Brink, Wim

    2013-03-01

    New psychoactive drugs (NPDs, new psychoactive substances) enter the market all the time. However, it takes several months to ban these NPDs and immediate action is generally not possible. Several European countries and drug enforcement officers insist on a faster procedure to ban NPDs. Introduction of generic legislation, in which clusters of psychotropic drugs are banned in advance, has been mentioned as a possible solution. Here we discuss the pros and cons of such an approach. First, generic legislation could unintentionally increase the expenditures of enforcement, black market practices, administrative burden and health risks for users. Second, it may have a negative impact on research and the development of new treatments. Third, due to the complexity of generic legislation, problems in the enforcement are anticipated due to lack of knowledge about the chemical nomenclature. Finally, various legal options are already available to ban the use, sale and trade of NPDs. We therefore conclude that the currently used scientific benefit-risk evaluation should be continued to limit the adverse health effects of NPDs. Only in emergency cases, where fatal incidents (may) occur, should this approach be overruled.

  17. Generic programming for deterministic neutron transport codes

    International Nuclear Information System (INIS)

    Plagne, L.; Poncot, A.

    2005-01-01

    This paper discusses the implementation of neutron transport codes via generic programming techniques. Two different Boltzmann equation approximations have been implemented, namely the Sn and SPn methods. This implementation experiment shows that generic programming allows us to improve maintainability and readability of source codes with no performance penalties compared to classical approaches. In the present implementation, matrices and vectors as well as linear algebra algorithms are treated separately from the rest of source code and gathered in a tool library called 'Generic Linear Algebra Solver System' (GLASS). Such a code architecture, based on a linear algebra library, allows us to separate the three different scientific fields involved in transport codes design: numerical analysis, reactor physics and computer science. Our library handles matrices with optional storage policies and thus applies both to Sn code, where the matrix elements are computed on the fly, and to SPn code where stored matrices are used. Thus, using GLASS allows us to share a large fraction of source code between Sn and SPn implementations. Moreover, the GLASS high level of abstraction allows the writing of numerical algorithms in a form which is very close to their textbook descriptions. Hence the GLASS algorithms collection, disconnected from computer science considerations (e.g. storage policy), is very easy to read, to maintain and to extend. (authors)

  18. Beam loading

    OpenAIRE

    Boussard, Daniel

    1987-01-01

    We begin by giving a description of the radio-frequency generator-cavity-beam coupled system in terms of basic quantities. Taking beam loading and cavity detuning into account, expressions for the cavity impedance as seen by the generator and as seen by the beam are derived. Subsequently methods of beam-loading compensation by cavity detuning, radio-frequency feedback and feedforward are described. Examples of digital radio-frequency phase and amplitude control for the special case of superco...

  19. Generic Switching and Non-Persistence among Medicine Users

    DEFF Research Database (Denmark)

    Østergaard Rathe, Jette; Andersen, Morten; Jarbøl, Dorte Ejg

    2015-01-01

    BACKGROUND: Generic substitution means that one medicinal product is replaced by another product containing the same active substance. It is strictly regulated with respect to its bioequivalence, and all products must have undergone appropriate studies. Although generic substitution is widely...... implemented, it still remains to be answered how generic switch influences persistence to long-term treatment, and if it is modified by patients' concerns about medicine and views on generic medicine. This study focuses on users of antidepressants and antiepileptics, and their experience of generic switching....... METHODS: The study was an observational cohort study. By use of a prescription database, we identified patients who had redeemed prescriptions on generically substitutable drugs, and a questionnaire was mailed to them. We analyzed predictors of discontinuation in relation to generic switch and patients...

  20. Advances on generic exemption levels and generic clearance levels in the argentinean regulatory field

    International Nuclear Information System (INIS)

    Muñiz, C.C.; Bossio, M.C.

    2011-01-01

    With the aim of optimizing the regulatory effort in Argentina, the Nuclear Regulatory Authority (ARN) evaluated two worldwide concepts used in the radioactive waste management field: “Generic Exemption Levels” and “Generic Clearance Levels”. The objective of this paper is to present the progress made in the past two years in relation to these topics and to present the results of the specific requests received from users of radioactive material. Since the approval of both Generic Levels, the ARN received two exemption requests. The first one, regarding the practice of dismantling lighting rods with 241 Am. The other case regards the international trade, distribution, usage and final disposal of lighting products with radioactive material ( 85 Kr and 232 Th). Concerning clearance, there has not been any request yet. However, in the future the ARN expects to receive this kind of requests from nuclear power plants and other facilities related to the nuclear fuel cycle. (authors) [es

  1. A generic coordinate system and a set of generic variables for MFE database

    International Nuclear Information System (INIS)

    Miner, W.H. Jr.; Ross, D.W.; Solano, E.R.; Valanju, P.M.; Wiley, J.C.

    1993-01-01

    Over the last several years, profile data from nine different tokamaks have been stored in the magnetic fusion energy database (MFEDB). These data sets have come from a variety of sources and most are given in different coordinate systems. In order to attempt any intermachine analysis, it is convenient to transform these data sets into one generic coordinate system and to choose a uniform set of variable names. The authors describe the data sets from each tokamak indicating the source of the data and the coordinate system in which it is given. Next, they discuss the generic coordinate that has been adopted and show how it is implemented for each tokamak. Finally, the generic naming convention that has been adopted is discussed. It follows closely that which was used by Christiansen et al. for the ITER Global Energy Confinement H-Mode Database. For further clarification, they discuss the characteristics of the magnetic geometry given a Fourier representation of the magnetic equilibria

  2. Loading relativistic Maxwell distributions in particle simulations

    International Nuclear Information System (INIS)

    Zenitani, Seiji

    2015-01-01

    Numerical algorithms to load relativistic Maxwell distributions in particle-in-cell (PIC) and Monte-Carlo simulations are presented. For stationary relativistic Maxwellian, the inverse transform method and the Sobol algorithm are reviewed. To boost particles to obtain relativistic shifted-Maxwellian, two rejection methods are proposed in a physically transparent manner. Their acceptance efficiencies are ≈50% for generic cases and 100% for symmetric distributions. They can be combined with arbitrary base algorithms

  3. Loading relativistic Maxwell distributions in particle simulations

    Energy Technology Data Exchange (ETDEWEB)

    Zenitani, Seiji, E-mail: seiji.zenitani@nao.ac.jp [National Astronomical Observatory of Japan, 2-21-1 Osawa, Mitaka, Tokyo 181-8588 (Japan)

    2015-04-15

    Numerical algorithms to load relativistic Maxwell distributions in particle-in-cell (PIC) and Monte-Carlo simulations are presented. For stationary relativistic Maxwellian, the inverse transform method and the Sobol algorithm are reviewed. To boost particles to obtain relativistic shifted-Maxwellian, two rejection methods are proposed in a physically transparent manner. Their acceptance efficiencies are ≈50% for generic cases and 100% for symmetric distributions. They can be combined with arbitrary base algorithms.

  4. Consumer choice between common generic and brand medicines in a country with a small generic market.

    Science.gov (United States)

    Fraeyman, Jessica; Peeters, Lies; Van Hal, Guido; Beutels, Philippe; De Meyer, Guido R Y; De Loof, Hans

    2015-04-01

    Generic medicines offer an opportunity for governments to contain pharmaceutical expenditures, since generics are generally 10%-80% lower in price than brand medicines. Belgium has a small generic market that takes up 15% of the total pharmaceutical market in packages sold. To determine the knowledge of consumers about the different available packages of a common over-the-counter medicine (acetaminophen) with regard to price advantage, quality, and effectiveness in a country with a small generic market. We conducted an online survey in the general Flemish population using a questionnaire with 25 statements. The questionnaire also contained 2 informative interventions. First, we showed the price per package and per tablet that the patient would pay in the pharmacy. Second, we provided the respondent with general information about generic medication (equivalence, effectiveness, price, and recognition). Before and after the interventions, we probed for preferences and knowledge about the different packages. Multivariate logistic models were used to examine the independent effects of consumer characteristics on responses to the survey statements. We obtained a sample of 1,636 respondents. The general attitude towards generic medication was positive-only 5% would rather not use a generic. Nevertheless, only 17% of the respondents were able to recognize a generic medicine. Older consumers (aged 60 years and above) were more often confused about the different packages (OR = 2.59, 95% CI = 1.76-3.80, P ≤ 0.001). Consumers without a higher education degree tended to be more doubtful about the difference in effectiveness and quality between the different brands (OR = 0.59, 95% CI = 0.44-0.79, P ≤ 0.001). Consumer recognition of the name of the active substance of acetaminophen was poor. When different brands were displayed, possible price advantage seemed to be an important motive to switch to a cheaper brand. Consumers generally found medicines

  5. Generic drugs: myths, facts, and limitations

    Directory of Open Access Journals (Sweden)

    Antonio Marzo

    2012-10-01

    Full Text Available Bioequivalence (BE has always been an important pharmaceutical area, particularly (but not solely in Mediterranean region, where the use of generic drugs is a relatively recent development. The lack of new therapeutic molecules has concentrated primary research in the hands of a few large pharmaceutical companies. For smaller companies, this has created opportunities for the development of new formulations of existing drugs (orodispersible tablets that dissolve in the mouth, extended-release tablets, transdermal delivery systems, generic drugs. These applications take advantage of the Abridged New Drug Application (ANDA procedure, which exempts them from a series of expensive investigations and limits the requirement for clinical testing to bioequivalence trials. Since 1991, bioequivalence trials have been regulated by US Food and Drug Administration (FDA and European Medicines Agency (EMA guidelines that provide precise indications on the most specific procedures to be adopted. In spite of these guidelines, however, some aspects of the process have not been fully defined, the most important of which regards the management of endogenous substances. Additional problems are how to manage bioequivalence protocols with drugs that have long half-lives and those whose clearance is characterized by high intrinsic variability. The view that bioequivalence data would be more reliable if they were based on studies in target populations is a myth to be discredited. The present paper reviews issues relative to pharmacokinetics (PK, bioavailability (BA, and bioequivalence, also from an historical viewpoint, and includes a stimulating “questions and answers” section on some key aspects of the bioequivalence of generic drugs.

  6. Generic evolution of mixing in heterogeneous media

    Science.gov (United States)

    De Dreuzy, J.; Carrera, J.; Dentz, M.; Le Borgne, T.

    2011-12-01

    Mixing in heterogeneous media results from the competition bewteen flow fluctuations and local scale diffusion. Flow fluctuations quickly create concentration contrasts and thus heterogeneity of the concentration field, which is slowly homogenized by local scale diffusion. Mixing first deviates from Gaussian mixing, which represents the potential mixing induced by spreading before approaching it. This deviation fundamentally expresses the evolution of the interaction between spreading and local scale diffusion. We characterize it by the ratio γ of the non-Gaussian to the Gaussian mixing states. We define the Gaussian mixing state as the integrated squared concentration of the Gaussian plume that has the same longitudinal dispersion as the real plume. The non-Gaussian mixing state is the difference between the overall mixing state defined as the integrated squared concentration and the Gaussian mixing state. The main advantage of this definition is to use the full knowledge previously acquired on dispersion for characterizing mixing even when the solute concentration field is highly non Gaussian. Using high precision numerical simulations, we show that γ quickly increases, peaks and slowly decreases. γ can be derived from two scales characterizing spreading and local mixing, at least for large flux-weighted solute injection conditions into classically log-normal Gaussian correlated permeability fields. The spreading scale is directly related to the longitudinal dispersion. The local mixing scale is the largest scale over which solute concentrations can be considered locally uniform. More generally, beyond the characteristics of its maximum, γ turns out to have a highly generic scaling form. Its fast increase and slow decrease depend neither on the heterogeneity level, nor on the ratio of diffusion to advection, nor on the injection conditions. They might even not depend on the particularities of the flow fields as the same generic features also prevail for

  7. Deriving GENERIC from a Generalized Fluctuation Symmetry

    Science.gov (United States)

    Kraaij, Richard; Lazarescu, Alexandre; Maes, Christian; Peletier, Mark

    2018-02-01

    Much of the structure of macroscopic evolution equations for relaxation to equilibrium can be derived from symmetries in the dynamical fluctuations around the most typical trajectory. For example, detailed balance as expressed in terms of the Lagrangian for the path-space action leads to gradient zero-cost flow. We expose a new such fluctuation symmetry that implies GENERIC, an extension of gradient flow where a Hamiltonian part is added to the dissipative term in such a way as to retain the free energy as Lyapunov function.

  8. Might generic OCs create contraceptive price war?

    Science.gov (United States)

    1987-02-01

    Genora 1/35 and 1/50, the 1st generic oral contraceptives (OCs) in the world, are now being marketed in the US. Clinicians interviewed by "Contraceptive Technology Update" (CTU) offer differing opinions as to what this new OC may mean in the marketplace. Products of Rugby Laboratories, the pills are copy products of Ortho Pharmaceutical's ON 1/35 and ON 1/50 formulations. Most clinicians believe that Genora's success or failure in the OC market depends on its eventual retail price. The price difference of $3-$4 may be sufficiently substantial for retailers to charge less for the generic OCs. If that is the case, many doctors may prescribe a pill which will save their patients $4/month. Dr. Mildred Hanson, a Minneapolis gynecologist/obstetrician, feels any cost savings from Genora will have a significant impact on the OC market. She suggests that the less expensive OCs will catch the attention of health maintenance organizations (HMOs) and the business of women who participate in such health plans. Yet James Burns, director of family planning services for the Hartford City Health Department, thinks that even a full-scale retail price war won't have much effect from a clinic standpoint. He reports that clinics are able to obtain contraceptive supplies rather inexpensively through the contracting system. Hanson also expressed doubt over the potential popularity of Genora 1/50 as clinical concerns about the effects of combined OCs on serum lipid levels and carbohydrate metabolism have resulted in a nationwide push toward OCs containing less than 50 micrograms of estrogen. He indicated concern that declines in pharmaceutical house products from pricing competition with generic pills might have a negative impact on contraceptive research and development. Dick Haskitt, director of business planning for Syntex Laboratories, Inc., who will produce the OCs for Rugby, reports that their market research shows that people are very interested in having a generic OC available

  9. The Northeast Utilities generic plant computer system

    International Nuclear Information System (INIS)

    Spitzner, K.J.

    1980-01-01

    A variety of computer manufacturers' equipment monitors plant systems in Northeast Utilities' (NU) nuclear and fossil power plants. The hardware configuration and the application software in each of these systems are essentially one of a kind. Over the next few years these computer systems will be replaced by the NU Generic System, whose prototype is under development now for Millstone III, an 1150 Mwe Pressurized Water Reactor plant being constructed in Waterford, Connecticut. This paper discusses the Millstone III computer system design, concentrating on the special problems inherent in a distributed system configuration such as this. (auth)

  10. Generic Wing-Body Aerodynamics Data Base

    Science.gov (United States)

    Holst, Terry L.; Olsen, Thomas H.; Kwak, Dochan (Technical Monitor)

    2001-01-01

    The wing-body aerodynamics data base consists of a series of CFD (Computational Fluid Dynamics) simulations about a generic wing body configuration consisting of a ogive-circular-cylinder fuselage and a simple symmetric wing mid-mounted on the fuselage. Solutions have been obtained for Nonlinear Potential (P), Euler (E) and Navier-Stokes (N) solvers over a range of subsonic and transonic Mach numbers and angles of attack. In addition, each solution has been computed on a series of grids, coarse, medium and fine to permit an assessment of grid refinement errors.

  11. Specialization of Generic Array Accesses After Inlining

    Directory of Open Access Journals (Sweden)

    Ryohei Tokuda

    2017-02-01

    Full Text Available We have implemented an optimization that specializes type-generic array accesses after inlining of polymorphic functions in the native-code OCaml compiler. Polymorphic array operations (read and write in OCaml require runtime type dispatch because of ad hoc memory representations of integer and float arrays. It cannot be removed even after being monomorphized by inlining because the intermediate language is mostly untyped. We therefore extended it with explicit type application like System F (while keeping implicit type abstraction by means of unique identifiers for type variables. Our optimization has achieved up to 21% speed-up of numerical programs.

  12. Entry decisions in the generic pharmaceutical industry.

    Science.gov (United States)

    Morton, F M

    1999-01-01

    Data on all generic drug entries in the period 1984-1994 are used to estimate which markets heterogeneous potential entrants will decide to enter. I find that organizational experience predicts entry. Firms tend to enter markets with supply and demand characteristics similar to the firm's existing drugs. Larger revenue markets, markets with more hospital sales, and products that treat chronic conditions attract more entry. The simultaneous nature of entry leads to an additional interpretation: specialization is profitable because of the severe risk to profits when a market is "overentered." However, I am unable to make any conclusions about the efficiency of entry decisions.

  13. Developing A Generic Optical Avionic Network

    DEFF Research Database (Denmark)

    Zhang, Jiang; An, Yi; Berger, Michael Stübert

    2011-01-01

    We propose a generic optical network design for future avionic systems in order to reduce the weight and power consumption of current networks on board. A three-layered network structure over a ring optical network topology is suggested, as it can provide full reconfiguration flexibility...... and support a wide range of avionic applications. Segregation can be made on different hierarchies according to system criticality and security requirements. The structure of each layer is discussed in detail. Two network configurations are presented, focusing on how to support different network services...... by such a network. Finally, three redundancy scenarios are discussed and compared....

  14. Generic device controller for accelerator control systems

    International Nuclear Information System (INIS)

    Mariotti, R.; Buxton, W.; Frankel, R.; Hoff, L.

    1987-01-01

    A new distributed intelligence control system has become operational at the AGS for transport, injection, and acceleration of heavy ions. A brief description of the functionality of the physical devices making up the system is given. An attempt has been made to integrate the devices for accelerator specific interfacing into a standard microprocessor system, namely, the Universal Device Controller (UDC). The main goals for such a generic device controller are to provide: local computing power; flexibility to configure; and real time event handling. The UDC assemblies and software are described

  15. Rigidity of complete generic shrinking Ricci solitons

    Science.gov (United States)

    Chu, Yawei; Zhou, Jundong; Wang, Xue

    2018-01-01

    Let (Mn , g , X) be a complete generic shrinking Ricci soliton of dimension n ≥ 3. In this paper, by employing curvature inequalities, the formula of X-Laplacian for the norm square of the trace-free curvature tensor, the weak maximum principle and the estimate of the scalar curvature of (Mn , g) , we prove some rigidity results for (Mn , g , X) . In particular, it is showed that (Mn , g , X) is isometric to Rn or a finite quotient of Sn under a pointwise pinching condition. Moreover, we establish several optimal inequalities and classify those shrinking solitons for equalities.

  16. Generic Patch Inference

    DEFF Research Database (Denmark)

    Andersen, Jesper; Lawall, Julia Laetitia

    2008-01-01

    A key issue in maintaining Linux device drivers is the need to update drivers in response to evolutions in Linux internal libraries. Currently, there is little tool support for performing and documenting such changes. In this paper we present a tool, spfind, that identifies common changes made...... developers can use it to extract an abstract representation of the set of changes that others have made. Our experiments on recent changes in Linux show that the inferred generic patches are more concise than the corresponding patches found in commits to the Linux source tree while being safe with respect...

  17. The generic Gröbner walk

    DEFF Research Database (Denmark)

    Jensen, Anders Nedergaard; Lauritzen, Niels; Fukuda, Komei

    2005-01-01

    perturbation of this line. This usually involves both time and space demanding arithmetic of integers much larger than the input numbers. In this paper we show how the explicit line may be replaced by a formal line using Robbiano's characterization of group orders on . This gives rise to the generic Gröbner...... walk involving only Gröbner basis conversion over facets and computations with marked polynomials. The infinite precision integer arithmetic is replaced by term order comparisons between (small) integral vectors. This makes it possible to compute with infinitesimal numbers and perturbations...

  18. Influencers of generic drug utilization: A systematic review.

    Science.gov (United States)

    Howard, Jennifer N; Harris, Ilene; Frank, Gavriella; Kiptanui, Zippora; Qian, Jingjing; Hansen, Richard

    2017-08-04

    With an increase in prescription drug spending and rising drug costs there is a need to encourage the use of generic prescription drugs. However, maximizing generic drug use is not possible without the public's positive perception and meeting their informational needs about generic drugs. Thus, improving the public's confidence in, and knowledge of generic drugs on the market is critical. The objective of this systematic review is to examine and evaluate the studies focusing on the nature and extent of key factors influencing generic drug use in the United States in order to help guide policy, education and practice interventions. Using multiple search engines and key word screening criteria, empirical studies published in English between January 1, 2005 and December 31, 2015 were identified. A qualitative synthesis of the evidence identified domains of key factors that influenced generic drug use across studies. Over 3000 citations met the key word screening criteria; 67 of these met inclusion criteria for the systematic review. Seven domains of factors that influence generic drug utilization were identified: 1) patient-related factors, 2) formulary management or cost containment, 3) healthcare policies, 4) promotional activities, 5) educational initiatives, 6) technology, and 7) physician-related factors. Patients, physicians, pharmacists, formulary managers, and policymakers play an important role in generic drug use. Understanding the factors influencing generic drug use can help guide future policy, education, and practice interventions to increase generic drug use. Copyright © 2017 Elsevier Inc. All rights reserved.

  19. Beam loading

    CERN Document Server

    Gamp, Alexander

    2013-01-01

    We begin by giving a description of the radio-frequency generator-cavity-beam coupled system in terms of basic quantities. Taking beam loading and cavity detuning into account, expressions for the cavity impedance as seen by the generator and as seen by the beam are derived. Subsequently methods of beam-loading compensation by cavity detuning, radio-frequency feedback and feedforward are described. Examples of digital radio-frequency phase and amplitude control for the special case of superconducting cavities are also given. Finally, a dedicated phase loop for damping synchrotron oscillations is discussed.

  20. Beam loading

    International Nuclear Information System (INIS)

    Gamp, Alexander

    2013-01-01

    We begin by giving a description of the radio-frequency generator-cavity-beam coupled system in terms of basic quantities. Taking beam loading and cavity detuning into account, expressions for the cavity impedance as seen by the generator and as seen by the beam are derived. Subsequently methods of beam-loading compensation by cavity detuning, radio-frequency feedback and feedforward are described. Examples of digital radio-frequency phase and amplitude control for the special case of superconducting cavities are also given. Finally, a dedicated phase loop for damping synchrotron oscillations is discussed. (author)

  1. Load-Flow in Multiphase Distribution Networks: Existence, Uniqueness, Non-Singularity, and Linear Models

    Energy Technology Data Exchange (ETDEWEB)

    Bernstein, Andrey [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Dall-Anese, Emiliano [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Zhao, Changhong [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Wang, Cong [Ecole Polytechnique Federale de Lausanne (EPFL); Le Boudec, Jean-Yves [Ecole Polytechnique Federale de Lausanne (EPFL)

    2018-04-06

    This paper considers unbalanced multiphase distribution systems with generic topology and different load models, and extends the Z-bus iterative load-flow algorithm based on a fixed-point interpretation of the AC load-flow equations. Explicit conditions for existence and uniqueness of load-flow solutions are presented. These conditions also guarantee convergence of the load-flow algorithm to the unique solution. The proposed methodology is applicable to generic systems featuring (i) wye connections; (ii) ungrounded delta connections; (iii) a combination of wye-connected and delta-connected sources/loads; and, (iv) a combination of line-to-line and line-to-grounded-neutral devices at the secondary of distribution transformers. Further, a sufficient condition for the non-singularity of the load-flow Jacobian is proposed. Finally, linear load-flow models are derived, and their approximation accuracy is analyzed. Theoretical results are corroborated through experiments on IEEE test feeders.

  2. The choice of dynamic amplification factors for the ITER generic port plugs during disruptions

    International Nuclear Information System (INIS)

    Vacas, Christian; Rodriguez, Eduardo; Guirao, Julio; Iglesias, Silvia; Udintsev, Victor; Pak, Sunil; Maquet, Philippe; Roces, Jorge; Casal, Natalia

    2015-01-01

    Highlights: • Dynamic amplification factor is largely influenced by the DFWs geometry and for the type of bond between DFW and DSM. • DAF were calculated by analyzing the deformed shape and not just looking at the absolute values of displacements. • Detailed transient time history non-linear analysis of an MDUP II electro magnetic event has been carried out. • Cuasi-constant damping ratio of 3% has been considered using a generalized proportional damping model. - Abstract: The purpose of this paper is present an overview of the methodology followed to calculate the dynamic amplification factors applied to the electromagnetic loads acting in the ITER generic port plugs. The methodology used for combining an EM transient event with another kind of load is based in the treated of this dynamic EM event as a static load. As first stage a transient dynamic analysis was performed, at the most demanded electromagnetic event [2], to determine the dynamic response of the port plugs. In the same way, have been solved all the time steps of the dynamic event as static loads, it means that the inertial effect has been neglected. The response of each time-step at the dynamic solution has been compared with the same time-step solved as a static load. For this purpose some control points were positioned along the structure at the most representative locations. The key of these calculations is the understanding of the deformed modes affecting the port plug in order to obtain a reasonable dynamic amplification factors that permit the characterization of these loads in a realistic way and does not derive in a too conservative approach. Additionally, the fundamental frequencies and vibration modes of the generic port plug, requested for the characterization of the damping effects at the structure, were calculated in a complementary modal analysis performed for this aim.

  3. A prioritization of generic safety issues

    International Nuclear Information System (INIS)

    Emrit, R.; Riggs, R.; Milstead, W.; Pittman, J.

    1991-07-01

    This report presents the priority rankings for generic safety issues and related to nuclear power plants. The purpose of these rankings is to assist in the timely and efficient allocation of NRC resources for the resolution of those safety issues that have a significant potential for reducing risk. The report focuses on the prioritization of generic safety issues. Issues primarily concerned with the licensing process or environmental protection and not directly related to safety have been excluded from prioritization. The prioritized issues include: TMI Action Plan items under development; previously proposed issues covered by Task Action Plans, except issues designated as Un-resolved Safety Issues (USIs) which had already been assigned high priority; and newly-proposed issues. Future supplements to this report will include the prioritization of additional issues. The safety priority rankings are High, Medium, Low, and Drop and have been assigned on the basis of risk significance estimates, the ratio of risk to costs and other impacts estimated to result if resolutions of the safety issues were implemented, and the consideration of uncertainties and other quantitative or qualitative factors. To the extent practical, estimates are quantitative. 1310 refs

  4. Load sensor

    NARCIS (Netherlands)

    Van den Ende, D.; Almeida, P.M.R.; Dingemans, T.J.; Van der Zwaag, S.

    2007-01-01

    The invention relates to a load sensor comprising a polymer matrix and a piezo-ceramic material such as PZT, em not bedded in the polymer matrix, which together form a compos not ite, wherein the polymer matrix is a liquid crystalline resin, and wherein the piezo-ceramic material is a PZT powder

  5. Carbohydrate Loading.

    Science.gov (United States)

    Csernus, Marilyn

    Carbohydrate loading is a frequently used technique to improve performance by altering an athlete's diet. The objective is to increase glycogen stored in muscles for use in prolonged strenuous exercise. For two to three days, the athlete consumes a diet that is low in carbohydrates and high in fat and protein while continuing to exercise and…

  6. UniBoard: generic hardware for radio astronomy signal processing

    Science.gov (United States)

    Hargreaves, J. E.

    2012-09-01

    UniBoard is a generic high-performance computing platform for radio astronomy, developed as a Joint Research Activity in the RadioNet FP7 Programme. The hardware comprises eight Altera Stratix IV Field Programmable Gate Arrays (FPGAs) interconnected by a high speed transceiver mesh. Each FPGA is connected to two DDR3 memory modules and three external 10Gbps ports. In addition, a total of 128 low voltage differential input lines permit connection to external ADC cards. The DSP capability of the board exceeds 644E9 complex multiply-accumulate operations per second. The first production run of eight boards was distributed to partners in The Netherlands, France, Italy, UK, China and Korea in May 2011, with a further production runs completed in December 2011 and early 2012. The function of the board is determined by the firmware loaded into its FPGAs. Current applications include beamformers, correlators, digital receivers, RFI mitigation for pulsar astronomy, and pulsar gating and search machines The new UniBoard based correlator for the European VLBI network (EVN) uses an FX architecture with half the resources of the board devoted to station based processing: delay and phase correction and channelization, and half to the correlation function. A single UniBoard can process a 64MHz band from 32 stations, 2 polarizations, sampled at 8 bit. Adding more UniBoards can expand the total bandwidth of the correlator. The design is able to process both prerecorded and real time (eVLBI) data.

  7. The importance of being first: evidence from Canadian generic pharmaceuticals.

    Science.gov (United States)

    Hollis, Aidan

    2002-12-01

    This paper uses pooled cross-section data on Canadian ethical drug sales to examine the effect of entry timing on sales of generic drugs. The data is for all drugs for which the first generic competitor entered during the years 1994-1997. It is found that the first generic entrant has a lasting competitive advantage: being first into the market appears to lead to an increase of around 30% in market share (among generics) over a period of at least 4 years. This finding has considerable implications for the current policy of allowing brandname drug companies to issue pseudo-generic equivalents as a preemptive strike against true generic competitors. Copyright 2002 John Wiley & Sons, Ltd.

  8. Contact Geometry of Hyperbolic Equations of Generic Type

    Directory of Open Access Journals (Sweden)

    Dennis The

    2008-08-01

    Full Text Available We study the contact geometry of scalar second order hyperbolic equations in the plane of generic type. Following a derivation of parametrized contact-invariants to distinguish Monge-Ampère (class 6-6, Goursat (class 6-7 and generic (class 7-7 hyperbolic equations, we use Cartan's equivalence method to study the generic case. An intriguing feature of this class of equations is that every generic hyperbolic equation admits at most a nine-dimensional contact symmetry algebra. The nine-dimensional bound is sharp: normal forms for the contact-equivalence classes of these maximally symmetric generic hyperbolic equations are derived and explicit symmetry algebras are presented. Moreover, these maximally symmetric equations are Darboux integrable. An enumeration of several submaximally symmetric (eight and seven-dimensional generic hyperbolic structures is also given.

  9. Impact of generic substitution decision support on electronic prescribing behavior.

    Science.gov (United States)

    Stenner, Shane P; Chen, Qingxia; Johnson, Kevin B

    2010-01-01

    To evaluate the impact of generic substitution decision support on electronic (e-) prescribing of generic medications. The authors analyzed retrospective outpatient e-prescribing data from an academic medical center and affiliated network for July 1, 2005-September 30, 2008 using an interrupted time-series design to assess the rate of generic prescribing before and after implementing generic substitution decision support. To assess background secular trends, e-prescribing was compared with a concurrent random sample of hand-generated prescriptions. Proportion of generic medications prescribed before and after the intervention, evaluated over time, and compared with a sample of prescriptions generated without e-prescribing. The proportion of generic medication prescriptions increased from 32.1% to 54.2% after the intervention (22.1% increase, 95% CI 21.9% to 22.3%), with no diminution in magnitude of improvement post-intervention. In the concurrent control group, increases in proportion of generic prescriptions (29.3% to 31.4% to 37.4% in the pre-intervention, post-intervention, and end-of-study periods, respectively) were not commensurate with the intervention. There was a larger change in generic prescribing rates among authorized prescribers (24.6%) than nurses (18.5%; adjusted OR 1.38, 95% CI 1.17 to 1.63). Two years after the intervention, the proportion of generic prescribing remained significantly higher for e-prescriptions (58.1%; 95% CI 57.5% to 58.7%) than for hand-generated prescriptions ordered at the same time (37.4%; 95% CI 34.9% to 39.9%) (p<0.0001). Generic prescribing increased significantly in every specialty. Implementation of generic substitution decision support was associated with dramatic and sustained improvements in the rate of outpatient generic e-prescribing across all specialties.

  10. Generic task problem descriptions: Category B, C, and D tasks

    International Nuclear Information System (INIS)

    1978-06-01

    This document contains information relating to Category B, C, and D generic technical activities. The specific information provided for each task includes the reactor type to which the generic issue applies, the NRC division with lead responsibility and a description of the problem to be addressed by the task. Also provided in this document is a listing of Category A generic technical activities and definitions of Priority Categories A, B, C, and D

  11. Guide for generic application of Reliability Centered Maintenance (RCM) recommendations

    International Nuclear Information System (INIS)

    Schwan, C.A.; Toomey, G.E.; Morgan, T.A.; Darling, S.S.

    1991-02-01

    Previously completed reliability centered maintenance (RCM) studies form the basis for developing or refining a preventive maintenance program. This report describes a generic methodology that will help utilities optimize nuclear plant maintenance programs using RCM techniques. This guide addresses the following areas: history of the generic methodology development process, and use of the generic methodology for conducting system-to-system and component-to-component evaluations. 2 refs., 2 figs., 5 tabs

  12. Encouraging the use of generic medicines: implications for transition economies.

    Science.gov (United States)

    King, Derek R; Kanavos, Panos

    2002-08-01

    Generic drugs have a key role to play in the efficient allocation of financial resources for pharmaceutical medicines. Policies implemented in the countries with a high rate of generic drug use, such as Canada, Denmark, Germany, the Netherlands, the United Kingdom, and the United States, are reviewed, with consideration of the market structures that facilitate strong competition. Savings in these countries are realized through increases in the volume of generic drugs used and the frequently significant differences in the price between generic medicines and branded originator medicines. Their policy tools include the mix of supply-side measures and demand-side measures that are relevant for generic promotion and higher generic use. On the supply-side, key policy measures include generic drug marketing regulation that facilitates market entry soon after patent expiration, reference pricing, the pricing of branded originator products, and the degree of price competition in pharmaceutical markets. On the demand-side, measures typically encompass influencing prescribing and dispensing patterns as well as introducing a co-payment structure for consumers/patients that takes into consideration the difference in cost between branded and generic medicines. Quality of generic medicines is a pre-condition for all other measures discussed to take effect. The paper concludes by offering a list of policy options for decision-makers in Central and Eastern European economies in transition.

  13. Generic substitution of antiretrovirals: patients' and health care providers' opinions.

    Science.gov (United States)

    Kieran, Jennifer A; O'Reilly, Eimear; O'Dea, Siobhan; Bergin, Colm; O'Leary, Aisling

    2017-10-01

    There is interest in introducing generic antiretroviral drugs (ARVs) into high-income countries in order to maximise efficiency in health care budgets. Studies examining patients' and providers' knowledge and attitudes to generic substitution in HIV are few. This was a cross-sectional, observational study with a convenience sample of adult HIV-infected patients and health care providers (HCPs). Data on demographics, knowledge of generic medicine and facilitators of generic substitution were collected. Descriptive and univariate analysis was performed using SPSS V.23™. Questionnaires were completed by 66 patients. Seventy-one per cent would have no concerns with the introduction of generic ARVs. An increase in frequency of administration (61%) or pill burden (53%) would make patients less likely to accept generic ARVs. There were 30 respondents to the HCP survey. Concerns included the supply chain of generics, loss of fixed dose combinations, adherence and use of older medications. An increase in dosing frequency (76%) or an increase in pill burden (50%) would make HCPs less likely to prescribe a generic ARV. The main perceived advantage was financial. Generic substitution of ARVs would be acceptable to the majority of patients and HCPs. Reinvesting savings back into HIV services would facilitate the success of such a programme.

  14. Brand loyalty, patients and limited generic medicines uptake.

    Science.gov (United States)

    Costa-Font, Joan; Rudisill, Caroline; Tan, Stefanie

    2014-06-01

    The sluggish development of European generic drug markets depends heavily on demand side factors, and more specifically, patients' and doctors' loyalty to branded products. Loyalty to originator drugs, to the point where originator prices rise upon generic entry has been described as the 'generics paradox'. Originator loyalty can emerge for a plethora of reasons; including costs, perceptions about quality and physician advice. We know very little about the behavioural underpinnings of brand loyalty from the consumer or patient standpoint. This paper attempts to test the extent to which patients are brand loyal by drawing upon Spain's 2002 Health Barometer survey as it includes questions about consumer acceptance of generics in a country with exceptionally low generic uptake and substitution at the time of the study. Our findings suggest that at least 13% of the population would not accept generics as substitutes to the originator. These results confirm evidence of brand loyalty for a minority. Alongside high levels of awareness of generics, we find that low cost-sharing levels explain consumer brand loyalty but their impact on acceptance of generic substitution is very small. Higher cost-sharing and exempting fewer patients from cost-sharing have the potential to encourage generic acceptance. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  15. Transforming Cobol Legacy Software to a Generic Imperative Model

    National Research Council Canada - National Science Library

    Moraes, DinaL

    1999-01-01

    .... This research develops a transformation system to convert COBOL code into a generic imperative model, recapturing the initial design and deciphering the requirements implemented by the legacy code...

  16. Towards Using a Generic Robot as Training Partner

    DEFF Research Database (Denmark)

    Sørensen, Anders Stengaard; Savarimuthu, Thiusius Rajeeth; Nielsen, Jacob

    2014-01-01

    In this paper, we demonstrate how a generic industrial robot can be used as a training partner, for upper limb training. The motion path and human/robot interaction of a non-generic upper-arm training robot is transferred to a generic industrial robot arm, and we demonstrate that the robot arm can...... implement the same type of interaction, but can expand the training regime to include both upper arm and shoulder training. We compare the generic robot to two affordable but custom-built training robots, and outline interesting directions for future work based on these training robots....

  17. Resource Loading by Branch-and-Price Techniques

    NARCIS (Netherlands)

    Hans, Elias W.

    2001-01-01

    The main contribution of this thesis is twofold. First, we propose a modeling approach that offers a generic framework to formulate various types of resource loading and RCCP problems as ILP models. Second, we propose various algorithms that can solve problems of reasonable size, i.e., typically

  18. Load sensor

    OpenAIRE

    Van den Ende, D.; Almeida, P.M.R.; Dingemans, T.J.; Van der Zwaag, S.

    2007-01-01

    The invention relates to a load sensor comprising a polymer matrix and a piezo-ceramic material such as PZT, em not bedded in the polymer matrix, which together form a compos not ite, wherein the polymer matrix is a liquid crystalline resin, and wherein the piezo-ceramic material is a PZT powder forming 30-60% by volume of the composite, and wherein the PZT powder forms 40-50% by volume of the composite.

  19. Development of an Integrated Nonlinear Aeroservoelastic Flight Dynamic Model of the NASA Generic Transport Model

    Science.gov (United States)

    Nguyen, Nhan; Ting, Eric

    2018-01-01

    This paper describes a recent development of an integrated fully coupled aeroservoelastic flight dynamic model of the NASA Generic Transport Model (GTM). The integrated model couples nonlinear flight dynamics to a nonlinear aeroelastic model of the GTM. The nonlinearity includes the coupling of the rigid-body aircraft states in the partial derivatives of the aeroelastic angle of attack. Aeroservoelastic modeling of the control surfaces which are modeled by the Variable Camber Continuous Trailing Edge Flap is also conducted. The R.T. Jones' method is implemented to approximate unsteady aerodynamics. Simulations of the GTM are conducted with simulated continuous and discrete gust loads..

  20. Generic Adaptively Secure Searchable Phrase Encryption

    Directory of Open Access Journals (Sweden)

    Kissel Zachary A.

    2017-01-01

    Full Text Available In recent years searchable symmetric encryption has seen a rapid increase in query expressiveness including keyword, phrase, Boolean, and fuzzy queries. With this expressiveness came increasingly complex constructions. Having these facts in mind, we present an efficient and generic searchable symmetric encryption construction for phrase queries. Our construction is straightforward to implement, and is proven secure under adaptively chosen query attacks (CQA2 in the random oracle model with an honest-but-curious adversary. To our knowledge, this is the first encrypted phrase search system that achieves CQA2 security. Moreover, we demonstrate that our document collection preprocessing algorithm allows us to extend a dynamic SSE construction so that it supports phrase queries. We also provide a compiler theorem which transforms any CQA2-secure SSE construction for keyword queries into a CQA2-secure SSE construction that supports phrase queries.

  1. Generic Automated Multi-function Finger Design

    Science.gov (United States)

    Honarpardaz, M.; Tarkian, M.; Sirkett, D.; Ölvander, J.; Feng, X.; Elf, J.; Sjögren, R.

    2016-11-01

    Multi-function fingers that are able to handle multiple workpieces are crucial in improvement of a robot workcell. Design automation of multi-function fingers is highly demanded by robot industries to overcome the current iterative, time consuming and complex manual design process. However, the existing approaches for the multi-function finger design automation are unable to entirely meet the robot industries’ need. This paper proposes a generic approach for design automation of multi-function fingers. The proposed approach completely automates the design process and requires no expert skill. In addition, this approach executes the design process much faster than the current manual process. To validate the approach, multi-function fingers are successfully designed for two case studies. Further, the results are discussed and benchmarked with existing approaches.

  2. Towards a generic user support system (GUS)

    International Nuclear Information System (INIS)

    Garland, W.J.; Wilson, R.J.

    1993-01-01

    One relevant issue confronting the operator of a nuclear power plant is information and task overload. The goal, then, of the various developers is to improve the current situations by creating an environment where the operator can perform at optimum capacity. This is to be accomplished by providing tools and techniques which reduce operator involvement in low level tasks (freeing up time for higher level cognitive tasks) and assist in information and knowledge manipulation so that high level tasks can be performed more efficiently. This paper reviews the operational environment of nuclear plants from the viewpoint of engineering design and from the viewpoint of the operators and technical support staff. Principles are advanced for a generic operator companion. These design principles are being applied to a test case: the Point Lepreau NGS secondary side central sampling system. 6 refs., 6 figs

  3. Generic Entity Resolution in Relational Databases

    Science.gov (United States)

    Sidló, Csaba István

    Entity Resolution (ER) covers the problem of identifying distinct representations of real-world entities in heterogeneous databases. We consider the generic formulation of ER problems (GER) with exact outcome. In practice, input data usually resides in relational databases and can grow to huge volumes. Yet, typical solutions described in the literature employ standalone memory resident algorithms. In this paper we utilize facilities of standard, unmodified relational database management systems (RDBMS) to enhance the efficiency of GER algorithms. We study and revise the problem formulation, and propose practical and efficient algorithms optimized for RDBMS external memory processing. We outline a real-world scenario and demonstrate the advantage of algorithms by performing experiments on insurance customer data.

  4. Crystallization Kinetics within a Generic Modeling Framework

    DEFF Research Database (Denmark)

    Meisler, Kresten Troelstrup; von Solms, Nicolas; Gernaey, Krist V.

    2014-01-01

    of employing a well-structured model library for storage, use/reuse, and analysis of the kinetic models are highlighted. Examples illustrating the application of the modeling framework for kinetic model discrimination related to simulation of specific crystallization scenarios and for kinetic model parameter......A new and extended version of a generic modeling framework for analysis and design of crystallization operations is presented. The new features of this framework are described, with focus on development, implementation, identification, and analysis of crystallization kinetic models. Issues related...... to the modeling of various kinetic phenomena like nucleation, growth, agglomeration, and breakage are discussed in terms of model forms, model parameters, their availability and/or estimation, and their selection and application for specific crystallization operational scenarios under study. The advantages...

  5. Dream content: Individual and generic aspects.

    Science.gov (United States)

    Hobson, Allan; Kahn, David

    2007-12-01

    Dream reports were collected from normal subjects in an effort to determine the degree to which dream reports can be used to identify individual dreamers. Judges were asked to group the reports by their authors. The judges scored the reports correctly at chance levels. This finding indicated that dreams may be at least as much like each other as they are the signature of individual dreamers. Our results suggest that dream reports cannot be used to identify the individuals who produced them when identifiers like names and gender of friends and family members are removed from the dream report. In addition to using dreams to learn about an individual, we must look at dreams as telling us about important common or generic aspects of human consciousness.

  6. Generic analysis of kinetically driven inflation

    Science.gov (United States)

    Saitou, Rio

    2018-04-01

    We perform a model-independent analysis of kinetically driven inflation (KDI) which (partially) includes generalized G-inflation and ghost inflation. We evaluate the background evolution splitting into the inflationary attractor and the perturbation around it. We also consider the quantum fluctuation of the scalar mode with a usual scaling and derive the spectral index, ignoring the contribution from the second-order products of slow-roll parameters. Using these formalisms, we find that within our generic framework the models of KDI which possess the shift symmetry of scalar field cannot create the quantum fluctuation consistent with the observation. Breaking the shift symmetry, we obtain a few essential conditions for viable models of KDI associated with the graceful exit.

  7. Generic Properties of Random Gene Regulatory Networks.

    Science.gov (United States)

    Li, Zhiyuan; Bianco, Simone; Zhang, Zhaoyang; Tang, Chao

    2013-12-01

    Modeling gene regulatory networks (GRNs) is an important topic in systems biology. Although there has been much work focusing on various specific systems, the generic behavior of GRNs with continuous variables is still elusive. In particular, it is not clear typically how attractors partition among the three types of orbits: steady state, periodic and chaotic, and how the dynamical properties change with network's topological characteristics. In this work, we first investigated these questions in random GRNs with different network sizes, connectivity, fraction of inhibitory links and transcription regulation rules. Then we searched for the core motifs that govern the dynamic behavior of large GRNs. We show that the stability of a random GRN is typically governed by a few embedding motifs of small sizes, and therefore can in general be understood in the context of these short motifs. Our results provide insights for the study and design of genetic networks.

  8. Generic Skills from Qur'anic Perspective

    Directory of Open Access Journals (Sweden)

    Siddig Ahmad

    2012-06-01

    Full Text Available Generic skills are defined as a set of skills that are directly related and needed for the working environment. Employers prefer to recruit officials who are competent in interpersonal communication, leadership skill, team work, oral and written skills. They are reluctant to employ graduates lacking certain necessary skills. This reveals the fact that there is a serious gap between the skills that are required by the employers and the skills that the graduates possess. Therefore, this research is focused on five aspects of generic skills namely; communication, team work, problem solving, lifelong learning and self-esteem. From Qur’anic perspective, the same terms have been used except minor differences in using various terms. The thematic approach is used when discussing these aspects from the Qur’an. The findings showed that the ways of effective communication are represented by terms of qawl sadid, qawl ma`ruf, qawl baligh, qawl maysur, qawl karim and qawl layyin. For collective work, ta`aruf and tafahum, as the pre-requisites, should be practiced via ta`awun and takaful. For problem solving, four methods are adapted from the Qur’an such as reflection of the past, observation, demonstration and asking questions. For lifelong learning, the establishment of learning institutions and the self-motivation of learners are two pre-requisites that should be undertaken for its accomplishment. They could be practiced through open learning system, consultation and hands-on learning. Last but not least, for personality development could be built up through physical training, spiritual training and mental training.

  9. Generic implications of ATWS events at the Salem Nuclear Power Plant: generic implications. Vol. 1

    International Nuclear Information System (INIS)

    1983-04-01

    This report is the first of two volumes. It documents the work of an interoffice, interdisciplinary NRC Task Force established to determine the generic implications of two anticipated transients without scram (ATWS) at the Salem Nuclear Power Plant, Unit 1 on February 22 and 25, 1983. A second report will document the NRC actions to be taken based on the work of the Task Force. The Task Force was established to address three questions: (1) Is there a need for prompt action for similar equipment in other facilities. (2) Are NRC and its licensees learning the sefety-management lessons, and, (3) How should the priority and content of the ATWS rule be adjusted. A number of short-term actions were taken through Bulletins and an Information Notice. Intermediate-term actions to address the generic issues will be addressed in the separate report and implemented through appropriate regulatory mechanisms

  10. Systematic identification of crystallization kinetics within a generic modelling framework

    DEFF Research Database (Denmark)

    Abdul Samad, Noor Asma Fazli Bin; Meisler, Kresten Troelstrup; Gernaey, Krist

    2012-01-01

    A systematic development of constitutive models within a generic modelling framework has been developed for use in design, analysis and simulation of crystallization operations. The framework contains a tool for model identification connected with a generic crystallizer modelling tool-box, a tool...

  11. When Does an Argument Use a Generic Example?

    Science.gov (United States)

    Yopp, David A.; Ely, Rob

    2016-01-01

    We offer criteria that an observer can use to determine whether an argument that uses an example to argue for a general claim appeals to that example generically. We review existing literature on generic example and note the strengths of each contribution, as well as inconsistencies among uses of the term. We offer several examples from the…

  12. 77 FR 60125 - Generic Drug Facilities, Sites and Organizations

    Science.gov (United States)

    2012-10-02

    ...] Generic Drug Facilities, Sites and Organizations AGENCY: Food and Drug Administration, HHS. ACTION: Notice..., and certain sites and organizations identified in a generic drug submission, that they must provide... and Innovation Act (FDASIA). This notice is intended to help organizations ascertain if they need to...

  13. Generic ICT Skills Profiles: Future Skills for Tomorrow's World.

    Science.gov (United States)

    International Co-operation Europe Ltd. (ICEL), Brussels, Belgium.

    This document describes generic skills profiles relevant to key jobs in information and communications technology (ICT). The profiles cover the main job areas for which the ICT industry is experiencing skills shortages. These types of information are provided for 18 generic job profiles: job description (vision, role, lifestyle); examples of job…

  14. Is bioavailability altered in generic versus brand anticonvulsants?

    Science.gov (United States)

    Jankovic, Slobodan M; Ignjatovic Ristic, Dragana

    2015-03-01

    Therapeutic window of anticonvulsants is not a wide one, with phenytoin being one extreme, which can be classified as a narrow therapeutic index drug, since its ratio between the least toxic and the least effective concentration is less than twofold. In order to obtain marketing authorization, a generic anticonvulsant should demonstrate relative bioequivalence with its brand-name counterpart. However, although bioequivalent, generic anticonvulsants still do not have the same bioavailability as brand-name drugs, which may lead to larger fluctuations of steady-state plasma concentrations, and sometimes to loss of seizure control if a patient is switched from brand-name to generic or from generic to generic anticonvulsant. Generic anticonvulsants are effective, safe and affordable drugs for treatment of epilepsy, and patients could be successfully treated with them from the very beginning. It is switching from brand-name to generic anticonvulsant or from one generic anticonvulsant to another that should be avoided in clinical practice, since subtle differences in bioavailability may disturb optimal degree of seizure control to which the patient was previously successfully titrated.

  15. Policies and perceptions on generic drugs: The case of Greece.

    Science.gov (United States)

    Xanthopoulou, Sofia-Sotiria; Katsaliaki, Korina

    2018-01-01

    The increase in the consumption of generic drugs to reduce pharmaceutical expenditure is a challenge for many countries, especially during the economic crisis. The purpose of the present study is to review the Greek market of generic drugs and the decisions that shape it, to determine the factors that affect Greek patients' and doctors' attitudes about generic substitution and present a set of measures for all stakeholders based on the findings of the secondary and primary analysis. The study includes (a) an analysis of international and national reports and legislation on drugs policies and (b) a questionnaire survey of 242 hospital patients and 85 doctors regarding their perceptions on generics. A small increase in the volume of generics is recorded, yet not followed by sales value, over the recent years that the measures for promoting generics prescription took effect. Distrust from both patients and doctors was observed toward generics' effectiveness and toward the appropriateness of the regulatory authorities' quality controls. The study presents a structured set of viable measures, applicable to many countries, for promoting generic drug consumption that can lead to economic efficiency without degrading the health care quality.

  16. Generic medicines: solutions for a sustainable drug market?

    Science.gov (United States)

    Dylst, Pieter; Vulto, Arnold; Godman, Brian; Simoens, Steven

    2013-10-01

    Generic medicines offer equally high-quality treatment as originator medicines do at much lower prices. As such, they represent a considerable opportunity for authorities to obtain substantial savings. At the moment, the pharmaceutical landscape is changing and many pharmaceutical companies have altered their development and commercial strategies, combining both originator and generic divisions. In spite of this, the generic medicines industry is currently facing a number of challenges: delayed market access; the limited price differential with originator medicines; the continuous downwards pressure on prices; and the negative perception regarding generic medicines held by some key stakeholder groups. This could jeopardize the long-term sustainability of the generic manufacturing industry. Therefore, governments must focus on demand-side policies, alongside policies to accelerate market access, as the generic medicines industry will only be able to deliver competitive and sustainable prices if they are ensured a high volume. In the future, the generic medicines industry will increasingly look to biosimilars and generic versions of orphan drugs to expand their business.

  17. Generic maintenance immunosuppression in solid organ transplant recipients.

    Science.gov (United States)

    Ensor, Christopher R; Trofe-Clark, Jennifer; Gabardi, Steven; McDevitt-Potter, Lisa M; Shullo, Michael A

    2011-11-01

    Survival after solid organ transplantation has increased in the era of tacrolimus and mycophenolate. This increased survival could be due in part to the broad clinical use of these potent and specific agents for maintenance immunosuppression. These drugs have enhanced specificity and potency for T and B lymphocytes compared with their predecessors, cyclosporine and azathioprine. Between 2008 and 2010, the United States Food and Drug Administration approved several generic formulations of both tacrolimus and mycophenolate mofetil. Deciding whether generic products can be safely substituted for the innovator product is a clinical dilemma similar to that which occurred when generic formulations of cyclosporine became available. We describe the concerns regarding generic immunosuppression use, summarize expert opinion and consensus statements in transplantation, analyze the potential impact of generic substitution, and provide estimates of populations affected based on generic drug market penetration. Formulary considerations such as cost, availability, and potential drug ordering and drug selection errors are described, and transplant coordinator and patient perspectives are reviewed. Finally, general recommendations about the use of generic maintenance immunosuppression in solid organ transplant recipients are provided. Although more research is needed to confirm clinical and therapeutic equivalence and pharmacoeconomic benefit, generic immunosuppressants can be safely substituted for innovator products as long as patients consistently receive the same product, patients and clinicians are aware of when substitutions occur, and enhanced therapeutic drug monitoring is provided during the transition.

  18. Potential cost savings from generic medicines – protecting the ...

    African Journals Online (AJOL)

    the difference between brand and generic medicines listed for that algorithm, and also as the median of differences between generic medicines for the same condition. Results: Three of the algorithms .... Protecting the PMBs, as a key element of the new community-rated medical schemes environment, is therefore vital.

  19. 76 FR 79198 - Generic Drug User Fee; Public Meeting; Correction

    Science.gov (United States)

    2011-12-21

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2010-N-0381] Generic Drug User Fee; Public Meeting; Correction AGENCY: Food and Drug Administration, HHS. ACTION... meeting entitled ``Generic Drug User Fee.'' The document published with an inadvertent error in the Dates...

  20. Generic medicines: Perceptions of Physicians in Basrah, Iraq

    Directory of Open Access Journals (Sweden)

    Adheed Khalid Sharrad

    2009-08-01

    Full Text Available BackgroundThe use of cheaper generic medicines is a strategy promotedin many countries to reduce rising health care costs. The aimof this study was to explore factors affecting generic medicineprescribing by physicians in Basrah, Iraq.MethodologyA purposive sample of ten physicians practicing in Basrahwas interviewed using a semi-structured interview guide.ResultsAnalysis of the interviews identified seven major themes:medicine prescribing practice, knowledge of therapeuticequivalency of generic medicine, patients’ acceptance ofgeneric medicine, counterfeit medicine, drug informationsource and effect of drug advertising on medicines choice,brand substitution practice by community pharmacists, and,finally strategies to improve generic medicine usefulness.Participants identified helpful strategies to increase genericprescribing including; physician and patient education ongeneric medicine; persuading physicians about the safety andefficacy of generic medicines; and finally educating seniormedical students on generic prescribing.ConclusionThe data suggest that participants were enthusiasticabout prescribing generic medicines. However physiciansinsist that pharmacists should not be allowed tosubstitute generic drugs without prior approval ofdoctors.

  1. 17 CFR 230.135a - Generic advertising.

    Science.gov (United States)

    2010-04-01

    ... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false Generic advertising. 230.135a Section 230.135a Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION GENERAL RULES AND REGULATIONS, SECURITIES ACT OF 1933 General § 230.135a Generic advertising. (a) For the purposes only of...

  2. Development of a generic virus behavioural detector: a preview ...

    African Journals Online (AJOL)

    The Generic Virus Behavioral Detector (GVBD) is a system (program) that monitors various system activities; reading and writing block of disks and memory and the use of Interrupts. A technique for its realisation is presented. Key Words: Computer virus, interrupts, handlers, GVBD (Generic Virus Behavioral Detector).

  3. Evaluation of generic and branded herbicides : technical report.

    Science.gov (United States)

    2015-03-01

    As with other generic brand products in the marketplace, generic herbicides often have a lower initial product cost than : their brand-name counterparts. While the purchase price of herbicides is important to TxDOT, it is essential to look at : more ...

  4. 40 CFR 721.10036 - Acetaldehyde based polymer (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Acetaldehyde based polymer (generic... Specific Chemical Substances § 721.10036 Acetaldehyde based polymer (generic). (a) Chemical substance and... based polymer (PMN P-02-406) is subject to reporting under this section for the significant new uses...

  5. 40 CFR 721.10151 - Modified styrene, divinylbenzene polymer (generic).

    Science.gov (United States)

    2010-07-01

    ... polymer (generic). 721.10151 Section 721.10151 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.10151 Modified styrene, divinylbenzene polymer (generic). (a) Chemical... as modified styrene, divinylbenzene polymer (PMN P-07-642) is subject to reporting under this section...

  6. 40 CFR 721.10146 - Partially fluorinated condensation polymer (generic).

    Science.gov (United States)

    2010-07-01

    ... polymer (generic). 721.10146 Section 721.10146 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.10146 Partially fluorinated condensation polymer (generic). (a) Chemical... as partially fluorinated condensation polymer (PMN P-07-87) is subject to reporting under this...

  7. Developing competitive and sustainable Polish generic medicines market.

    Science.gov (United States)

    Simoens, Steven

    2009-10-01

    To descriptively analyze the policy environment surrounding the Polish generic medicines retail market. The policy analysis was based on an international literature review. Also, a simulation exercise was carried out to compute potential savings from substituting generic for originator medicines in Poland using IMS Health pharmaceutical intelligence data. Poland has a mature, high-volume, low-value generic medicines market, primarily driven by the establishment of the reference price at the price of the cheapest medicine in combination with pricing regulation and the low level of medicine prices. The practice of discounting in the distribution chain implies that the National Health Fund and patients do not capture the potential savings from a generic medicines market where companies compete on price. This high-volume market has benefited in the past from the limited availability of originator medicines and a short data exclusivity period, even though there are no incentives for physicians to prescribe generic medicines and a financial disincentive for pharmacists to dispense generic medicines. Increased generic substitution would be expected to reduce public expenditure on originator medicines by 21%. To develop a competitive and sustainable market, Poland needs to consider moving away from competition by discount to competition by price. This could be achieved by replacing maximum distribution margins by fixed margins. Also, Poland may wish to raise reference prices as a temporary measure to boost market entry for medicine classes with few generic medicines.

  8. Do All Ducks Lay Eggs? The Generic Overgeneralization Effect

    Science.gov (United States)

    Leslie, Sarah-Jane; Khemlani, Sangeet; Glucksberg, Sam

    2011-01-01

    Generics are statements such as "tigers are striped" and "ducks lay eggs". They express general, though not universal or exceptionless, claims about kinds (Carlson & Pelletier, 1995). For example, the generic "ducks lay eggs" seems true even though many ducks (e.g. the males) do not lay eggs. The universally quantified version of the statement…

  9. The Impact of Information on Doctors’ Attitudes Toward Generic Drugs

    Directory of Open Access Journals (Sweden)

    Aggeliki V. Tsaprantzi MD

    2016-03-01

    Full Text Available The objective of this study is to assess the impact of information on doctors’ attitudes and perceptions toward generics. A cross-sectional survey based on a specially designed 21-item questionnaire was conducted. The survey involved doctors of different specialties working in a public hospital in Greece. The analysis includes descriptive and inferential statistics, reliability and validity tests, as well as structural equation modeling to evaluate the causal model. Statistical analysis was accomplished by using SPSS 20 and Amos 20. A total of 134 questionnaires out of 162 were received, providing a response rate of 82.71%. A number of significant associations were found between information and perceptions about generic medicines with demographic characteristics. It seems that the provision of quality information on generic drugs influences doctors’ attitudes and prescription practices toward generic drugs. This is not a static process but a rather dynamic issue involving information provision policies for strengthening the proper doctors’ attitudes toward generic drugs.

  10. Generic policy in Bulgaria: a policy of failure or success?

    Directory of Open Access Journals (Sweden)

    Assena Stoimenova

    2016-09-01

    Full Text Available Generic medicines play a key role in managing the financial resources for pharmaceuticals in every country. This study analysed the generic policy legislative framework in Bulgaria with the aim to identify whether the policy implementation can be considered successful in the light of an international review of such policies introduced in other countries, or on the contrary, it has failed to deliver the main benefits. Legislative analysis, desktop study and macroeconomic overview of the Bulgarian pharmaceutical market were included. The study showed that only 3 out of 11 important policy elements are implemented in the country. Bulgaria has one of the highest shares of generics, an average of 81.39% (volume, for the studied period (2006–2014. However, further research is needed to evaluate the success of the existing generic policy in Bulgaria, as the market share of generic drugs is not the only measure of the policy efficiency.

  11. An audit of generic prescribing in a general surgical department.

    LENUS (Irish Health Repository)

    Gleeson, M

    2013-01-17

    BACKGROUND: The Health Service Executive introduced a generic prescription policy to reduce costs. Despite this, generic prescription rates remain low. AIM: To audit in-patient prescription practice in a single surgical department and identify potential savings which could be realised by adherence to the generic prescribing policy. METHODS: Surgical in-patient charts were obtained at the point of discharge and their drug prescription information was recorded. RESULTS: 51 % of prescriptions involved a trade-name prescription where an appropriate generic equivalent existed. The cost implications for hospital and community patients were found to be greatly affected by substitution policies that exist at hospital pharmacy level. CONCLUSION: There is a need to promote greater adherence to generic prescribing amongst hospital doctors in line with international best practice. It can have a positive impact in terms of safe prescribing and can have cost implications at both hospital and community level.

  12. Generic substitution: micro evidence from register data in Norway.

    Science.gov (United States)

    Dalen, Dag Morten; Furu, Kari; Locatelli, Marilena; Strøm, Steinar

    2011-02-01

    The importance of prices, doctor and patient characteristics, and market institutions for the likelihood of choosing generic drugs instead of the more expensive original brand-name version are examined. Using an extensive dataset extracted from The Norwegian Prescription Database containing all prescriptions dispensed to individuals in February 2004 and 2006 on 23 different drugs (chemical substances) in Norway, we find strong evidence for the importance of both doctor and patient characteristics for the choice probabilities. The price difference between brand and generic versions and insurance coverage both affect generic substitution. Moreover, controlling for the retail chain affiliation of the dispensing pharmacy, we find that pharmacies play an important role in promoting generic substitution. In markets with more recent entry of generic drugs, brand-name loyalty proves to be much stronger, giving less explanatory power to our demand model.

  13. Generic switching of warfarin and risk of excessive anticoagulation

    DEFF Research Database (Denmark)

    Hellfritzsch, Maja; Rathe, Jette; Stage, Tore Bjerregaard

    2016-01-01

    PURPOSE: Generic switching of warfarin was recently repealed in Denmark, as adverse drug reaction (ADR) reports suggested risk of excessive anticoagulation following switches from branded to generic warfarin. We investigated this putative association in a formalized pharmacoepidemiological analysis....... METHODS: We conducted a nationwide cohort study based on Danish healthcare registries, including data from the introduction of generic warfarin until the repeal (January 2011-April 2015). We followed Danish warfarin users over time and compared the rate of incident hospitalizations due to excessive...... anticoagulation (i.e. increased INR or any bleeding requiring hospitalization) in periods following a recent switch to generic warfarin to the rate in periods without a recent switch. RESULTS: We included 105,751 warfarin users, filling a total of 1,539,640 prescriptions for warfarin (2.5% for generic warfarin...

  14. Associations between generic substitution and patient-related factors

    DEFF Research Database (Denmark)

    Østergaard Rathe, Jette

    Associations between generic substitution and patient-related factors Jette Østergaard Rathe1, Pia V. Larsen1, Morten Andersen2, Janus L. Thomsen3, Maja S. Paulsen1, Jens Søndergaard1 1. Research Unit of General Practice, Institute of Public Health, University of Southern Denmark 2. Centre...... for Pharmacoepidemiology, Karolinska Institutet, Department of Medicine Solna, Stockholm, Sweden 3. Danish Quality Unit of General Practice, Odense, Denmark Background Generic substitution means that chemically equivalent but less expensive drugs are dispensed in place of a brand name product. Although generic medicines...... by definition are bioequivalent to their brand name counterparts there are concerns about whether generic substitution is always accompanied by clinical equivalence in terms of effectiveness and that it may cause concerns and thereby causing some skepticism towards generic substitution. There is, however...

  15. Generic Argillite/Shale Disposal Reference Case

    Energy Technology Data Exchange (ETDEWEB)

    Zheng, Liange; Colon, Carlos Jové; Bianchi, Marco; Birkholzer, Jens

    2014-08-08

    properties (parameters) used in these models are different, which not only make inter-model comparisons difficult, but also compromise the applicability of the lessons learned from one model to another model. The establishment of a reference case would therefore be helpful to set up a baseline for model development. A generic salt repository reference case was developed in Freeze et al. (2013) and the generic argillite repository reference case is presented in this report. The definition of a reference case requires the characterization of the waste inventory, waste form, waste package, repository layout, EBS backfill, host rock, and biosphere. This report mainly documents the processes in EBS bentonite and host rock that are potentially important for performance assessment and properties that are needed to describe these processes, with brief description other components such as waste inventory, waste form, waste package, repository layout, aquifer, and biosphere. A thorough description of the generic argillite repository reference case will be given in Jové Colon et al. (2014).

  16. Developing a generic environmental safety case

    International Nuclear Information System (INIS)

    Bailey, Lucy

    2014-01-01

    The Nuclear Decommissioning Authority (NDA) has been charged with implementing the United Kingdom government's policy for the long-term management of higher activity radioactive waste by planning, building and operating a geological disposal facility (GDF). Within the NDA, we - the Radioactive Waste Management Directorate (RWMD) - are tasked with the development of a GDF. The UK government has also decided that a process of voluntarism and partnership will be followed to identify a suitable site for the GDF. To date there is no volunteer community and the site selection process to find a volunteer host community is under review. RWMD has an ongoing role to provide advice to UK radioactive waste producers on the conditioning and packaging of wastes and to undertake disposability assessments of waste packaging proposals to determine their suitability for eventual disposal in a GDF. We also need to demonstrate our confidence that a GDF would be safe. Therefore RWMD has published a generic Environmental Safety Case (ESC) (NDA, 2010) to demonstrate that we are confident that a GDF could be developed to meet the guidelines set down by the environmental regulators (EA/NIEA, 2009) in a range of geological settings. The ESC includes reference case calculations that are used as a benchmark for disposability assessments. (author)

  17. Modeling generic aspects of ideal fibril formation

    Energy Technology Data Exchange (ETDEWEB)

    Michel, D., E-mail: denis.michel@live.fr [Universite de Rennes1-IRSET, Campus de Beaulieu Bat. 13, 35042 Rennes (France)

    2016-01-21

    Many different proteins self-aggregate into insoluble fibrils growing apically by reversible addition of elementary building blocks. But beyond this common principle, the modalities of fibril formation are very disparate, with various intermediate forms which can be reshuffled by minor modifications of physico-chemical conditions or amino-acid sequences. To bypass this complexity, the multifaceted phenomenon of fibril formation is reduced here to its most elementary principles defined for a linear prototype of fibril. Selected generic features, including nucleation, elongation, and conformational recruitment, are modeled using minimalist hypotheses and tools, by separating equilibrium from kinetic aspects and in vitro from in vivo conditions. These reductionist approaches allow to bring out known and new rudiments, including the kinetic and equilibrium effects of nucleation, the dual influence of elongation on nucleation, the kinetic limitations on nucleation and fibril numbers, and the accumulation of complexes in vivo by rescue from degradation. Overlooked aspects of these processes are also pointed: the exponential distribution of fibril lengths can be recovered using various models because it is attributable to randomness only. It is also suggested that the same term “critical concentration” is used for different things, involved in either nucleation or elongation.

  18. Generic implications of the Chernobyl accident

    International Nuclear Information System (INIS)

    Sege, G.

    1989-01-01

    The US Nuclear Regulatory Commission (NRC) staff's assessment of the generic implications of the Chernobyl accident led to the conclusion that no immediate changes in the NRC's regulations regarding design or operation of US commercial reactors are needed. However, further consideration of certain issues was recommended. This paper discusses those issues and the studies being addressed to them. Although 24 tasks relating to light water reactor issues are identified in the Chernobyl follow-up research program, only four are new initiatives originating from Chernobyl implications. The remainder are limited modifications of ongoing programs designed to ensure that those programs duly reflect any lessons that may be drawn from the Chernobyl experience. The four new study tasks discussed include a study of reactivity transients, to reconfirm or bring into question the adequacy of potential reactivity accident sequences hitherto selected as a basis for design approvals; analysis of risk at low power and shutdown; a study of procedure violations; and a review of current NRC testing requirements for balance of benefits and risks. Also discussed, briefly, are adjustments to ongoing studies in the areas of operational controls, design, containment, emergency planning, and severe accident phenomena

  19. 78 FR 74175 - Agency Information Collection Activities: Proposed Collection; Comment Request; Generic Clearance...

    Science.gov (United States)

    2013-12-10

    ... precision requirements or power calculations that justify the proposed sample size, the expected response...: Proposed Collection; Comment Request; Generic Clearance for the Collection of Qualitative Feedback on... Information Collection Request (Generic ICR): ``Generic Clearance for the Collection of Qualitative Feedback...

  20. 76 FR 59379 - Proposed Information Collection; Comment Request; Generic Clearance for Research in Development...

    Science.gov (United States)

    2011-09-26

    ...-XXXX. Type of Review: Generic Clearance Request. Title: Generic Clearance for Research in Development... information collected through qualitative evaluation methods will inform the disclosure form's design and... Proposed Information Collection; Comment Request; Generic Clearance for Research in Development of...

  1. Innovation strategies for generic drug companies: moving into supergenerics.

    Science.gov (United States)

    Ross, Malcolm S F

    2010-04-01

    Pharmaceutical companies that market generic products generally are not regarded as innovators, but rather as companies that produce copies of originator products to be launched at patent expiration. However, many generics companies have developed excellent scientific innovative skills in an effort to circumvent the defense patents of originator companies. More patents per product, in terms of both drug substances (process patents and polymorph patents) and formulations, are issued to generics companies than to companies that are traditionally considered to be 'innovators'. This quantity of issued patents highlights the technical knowledge and skill sets that are available in generics companies. In order to adopt a completely innovative model (ie, the development of NCEs), a generics company would require a completely new set of skills in several fields, including a sufficient knowledge base, project and risk management experience, and capability for clinical data evaluation. However, with relatively little investment, generics companies should be able to progress into the so-called 'supergeneric' drug space - an area of innovation that reflects the existing competencies of both innovative and generics companies.

  2. Generic drug policy in Australia: a community pharmacy perspective

    Science.gov (United States)

    Beecroft, Grahame

    2007-01-01

    This article provides a commentary, from a community pharmacy perspective, on the policy environment for the pharmacy sector in Australia, with a particular focus on present challenges arising from proposals to achieve substantial PBS cost savings from an anticipated surge of new generic drugs. Some $2 billion of medicines currently on the PBS will come off patent in the next 4 years. This growth comes from a low base where generics currently account for only 15% of the total PBS budget. Remuneration for PBS dispensing is fixed through five year agreements with the government, so trading terms on generics are important for the cross-subsidy of other dispensing activities and professional services. These trading terms (discounts provided by generics suppliers) have become part of the overall cost and revenue structure of pharmacies. Despite these arrangements, generic substitution rates in Australia are lower than in most comparable countries, which the government views as an opportunity to promote generic use. The future of generic drug supply via the PBS is important to allow consumers access to medications at the lowest possible price and to provide space for PBS listing of new and expensive drugs. But considerations of PBS reform need to take account of the role and viability of community pharmacy sector as provider of pharmaceuticals in a timely and efficient manner to Australian residents. PMID:17543112

  3. Impact of alternative interventions on changes in generic dispensing rates.

    Science.gov (United States)

    O'Malley, A James; Frank, Richard G; Kaddis, Atheer; Rothenberg, Barbara M; McNeil, Barbara J

    2006-10-01

    To evaluate the effectiveness of four alternative interventions (member mailings, advertising campaigns, free generic drug samples to physicians, and physician financial incentives) used by a major health insurer to encourage its members to switch to generic drugs. Using claim-level data from Blue Cross Blue Shield of Michigan, we evaluated the success of four interventions implemented during 2000-2003 designed to increase the use of generic drugs among its members. Around 13 million claims involving seven important classes of drugs were used to assess the effectiveness of the interventions. For each intervention a control group was developed that most closely resembled the corresponding intervention group. Logistic regression models with interaction effects between the treatment group (intervention versus control) and the status of the intervention (active versus not active) were used to evaluate if the interventions had an effect on the generic dispensing rate (GDR). Because the mail order pharmacy was considered more aggressive at converting prescriptions to generics, separate generic purchasing models were fitted to retail and mail order claims. In secondary analyses separate models were also fitted to claims involving a new condition and claims refilled for preexisting conditions. The interventions did not appear to increase the market penetration of generic drugs for either retail or mail order claims, or for claims involving new or preexisting conditions. In addition, we found that the ratio of copayments for brand name to generic drugs had a large positive effect on the GDR. The interventions did not appear to directly influence the GDR. Financial incentives expressed to consumers through benefit designs have a large influence on their switching to generic drugs and on the less-costly mail-order mode of purchase.

  4. Differences in rates of switchbacks after switching from branded to authorized generic and branded to generic drug products: cohort study

    Science.gov (United States)

    Sarpatwari, Ameet; Dejene, Sara; Khan, Nazleen F; Lii, Joyce; Rogers, James R; Dutcher, Sarah K; Raofi, Saeid; Bohn, Justin; Connolly, John; Fischer, Michael A; Kesselheim, Aaron S; Gagne, Joshua J

    2018-01-01

    Abstract Objectives To compare rates of switchbacks to branded drug products for patients switched from branded to authorized generic drug products, which have the same active ingredients, appearance, and excipients as the branded product, with patients switched from branded to generic drug products, which have the same active ingredients as the branded product but may differ in appearance and excipients. Design Observational cohort study. Setting Private (a large commercial health plan) and public (Medicaid) insurance programs in the US. Participants Beneficiaries of a large US commercial health insurer between 2004 and 2013 (primary cohort) and Medicaid beneficiaries between 2000 and 2010 (replication cohort). Main outcome measures Patients taking branded products for one of the study drugs (alendronate tablets, amlodipine tablets, amlodipine-benazepril capsules, calcitonin salmon nasal spray, escitalopram tablets, glipizide extended release tablets, quinapril tablets, and sertraline tablets) were identified when they switched to an authorized generic or a generic drug product after the date of market entry of generic drug products. These patients were followed for switchbacks to the branded drug product in the year after their switch to an authorized generic or a generic drug product. Cox proportional hazard models were used to estimate hazard ratios and 95% confidence intervals after adjusting for demographics, including age, sex, and calendar year. Inverse variance meta-analysis was used to pool adjusted hazard ratios across all drug products. Results A total of 94 909 patients switched from branded to authorized generic drug products and 116 017 patients switched from branded to generic drug products and contributed to the switchback analysis. Unadjusted incidence rates of switchback varied across drug products, ranging from a low of 3.8 per 100 person years (for alendronate tablets) to a high of 17.8 per 100 person years (for amlodipine

  5. Business engineering. Generic Software Architecture in an Object Oriented View

    Directory of Open Access Journals (Sweden)

    Mihaela MURESAN

    2006-01-01

    Full Text Available The generic software architecture offers a solution for the the information system's development and implementation. A generic software/non-software model could be developed by integrating the enterprise blueprint concept (Zachman and the object oriented paradigm (Coad's archetype concept. The standardization of the generic software architecture for various specific software components could be a direction of crucial importance, offering the guarantee of the quality of the model and increasing the efficiency of the design, development and implementation of the software. This approach is also useful for the implementation of the ERP systems designed to fit the user’s particular requirements.

  6. Load testing circuit

    DEFF Research Database (Denmark)

    2009-01-01

    A load testing circuit a circuit tests the load impedance of a load connected to an amplifier. The load impedance includes a first terminal and a second terminal, the load testing circuit comprising a signal generator providing a test signal of a defined bandwidth to the first terminal of the load...

  7. Does educational intervention improve doctors’ knowledge and perceptions of generic medicines and their generic prescribing rate? A study from Malaysia

    Science.gov (United States)

    Wong, Zhi Yen; Alrasheedy, Alian A.; Saleem, Fahad; Mohamad Yahaya, Abdul Haniff; Aljadhey, Hisham

    2014-01-01

    Objectives: To investigate the impact of an educational intervention on doctors’ knowledge and perceptions towards generic medicines and their generic (international non-proprietary name) prescribing practice. Methods: This is a single-cohort pre-/post-intervention pilot study. The study was conducted in a tertiary care hospital in Perak, Malaysia. All doctors from the internal medicine department were invited to participate in the educational intervention. The intervention consisted of an interactive lecture, an educational booklet and a drug list. Doctors’ knowledge and perceptions were assessed by using a validated questionnaire, while the international non-proprietary name prescribing practice was assessed by screening the prescription before and after the intervention. Results: The intervention was effective in improving doctors’ knowledge towards bioequivalence, similarity of generic medicines and safety standards required for generic medicine registration (p = 0.034, p = 0.034 and p = 0.022, respectively). In terms of perceptions towards generic medicines, no significant changes were noted (p > 0.05). Similarly, no impact on international non-proprietary name prescribing practice was observed after the intervention (p > 0.05). Conclusion: Doctors had inadequate knowledge and misconceptions about generic medicines before the intervention. Moreover, international non-proprietary name prescribing was not a common practice. However, the educational intervention was only effective in improving doctors’ knowledge of generic medicines. PMID:26770747

  8. Chemical freezeout parameters within generic nonextensive statistics

    Science.gov (United States)

    Tawfik, Abdel; Yassin, Hayam; Abo Elyazeed, Eman R.

    2018-06-01

    The particle production in relativistic heavy-ion collisions seems to be created in a dynamically disordered system which can be best described by an extended exponential entropy. In distinguishing between the applicability of this and Boltzmann-Gibbs (BG) in generating various particle-ratios, generic (non)extensive statistics is introduced to the hadron resonance gas model. Accordingly, the degree of (non)extensivity is determined by the possible modifications in the phase space. Both BG extensivity and Tsallis nonextensivity are included as very special cases defined by specific values of the equivalence classes (c, d). We found that the particle ratios at energies ranging between 3.8 and 2760 GeV are best reproduced by nonextensive statistics, where c and d range between ˜ 0.9 and ˜ 1 . The present work aims at illustrating that the proposed approach is well capable to manifest the statistical nature of the system on interest. We don't aim at highlighting deeper physical insights. In other words, while the resulting nonextensivity is neither BG nor Tsallis, the freezeout parameters are found very compatible with BG and accordingly with the well-known freezeout phase-diagram, which is in an excellent agreement with recent lattice calculations. We conclude that the particle production is nonextensive but should not necessarily be accompanied by a radical change in the intensive or extensive thermodynamic quantities, such as internal energy and temperature. Only, the two critical exponents defining the equivalence classes (c, d) are the physical parameters characterizing the (non)extensivity.

  9. Mark I containment long-term program safety evaluation report, resolution of generic technical activity A-7. Report for February 1977-December 1979

    International Nuclear Information System (INIS)

    1980-07-01

    During testing for an advanced Boiling Water Reactor (BWR) containment system design (Mark III), suppression pool hydrodynamic loads were identified which had not been considered in the original design of the Mark I containment system. To address this issue, a Mark I Owners Group was formed and the assessment was divided into a short-term and long-term program. The results of the NRC staff's review of the Mark I Containment Short Term Program are described in NUREG-0408. This report describes the results of the NRC staff's review of the generic Mark I Containment Long Term Program (LTP). The LTP was conducted to provide a generic basis to define suppression pool hydrodynamic loads and the related structural acceptance criteria, such that a comprehensive reassessment of each Mark I containment system would be performed. A series of experimental and analytical programs were conducted by the Mark I Owners Group to provide the necessary bases for the generic load definition and structural assessment techniques. The generic methods proposed by the Mark I Owners Group, as modified by the NRC staff's requirements, will be used to perform plant-unique analyses, which will identify the plant modifications, if any, that will be needed to restore the originally intended margin of safety in the Mark I containment designs

  10. Generic Drugs: The Same Medicine for Less Money

    Science.gov (United States)

    ... about brand-name drugs. Resources Consumer Reports Best Buy Drugs can help you find lower-cost generic drugs. ... produced by Consumers Union and Consumer Reports Best Buy Drugs , a public information project supported by grants from ...

  11. Generic methods for aero-engine exhaust emission prediction

    NARCIS (Netherlands)

    Shakariyants, S.A.

    2008-01-01

    In the thesis, generic methods have been developed for aero-engine combustor performance, combustion chemistry, as well as airplane aerodynamics, airplane and engine performance. These methods specifically aim to support diverse emission prediction studies coupled with airplane and engine

  12. Generic radiation safety design for SSRL synchrotron radiation beamlines

    Energy Technology Data Exchange (ETDEWEB)

    Liu, James C. [Radiation Protection Department, Stanford Linear Accelerator Center (SLAC), MS 48, P.O. Box 20450, Stanford, CA 94309 (United States)]. E-mail: james@slac.stanford.edu; Fasso, Alberto [Radiation Protection Department, Stanford Linear Accelerator Center (SLAC), MS 48, P.O. Box 20450, Stanford, CA 94309 (United States); Khater, Hesham [Radiation Protection Department, Stanford Linear Accelerator Center (SLAC), MS 48, P.O. Box 20450, Stanford, CA 94309 (United States); Prinz, Alyssa [Radiation Protection Department, Stanford Linear Accelerator Center (SLAC), MS 48, P.O. Box 20450, Stanford, CA 94309 (United States); Rokni, Sayed [Radiation Protection Department, Stanford Linear Accelerator Center (SLAC), MS 48, P.O. Box 20450, Stanford, CA 94309 (United States)

    2006-12-15

    To allow for a conservative, simple, uniform, consistent, efficient radiation safety design for all SSRL beamlines, a generic approach has been developed, considering both synchrotron radiation (SR) and gas bremsstrahlung (GB) hazards. To develop the methodology and rules needed for generic beamline design, analytic models, the STAC8 code, and the FLUKA Monte Carlo code were used to pre-calculate sets of curves and tables that can be looked up for each beamline safety design. Conservative beam parameters and standard targets and geometries were used in the calculations. This paper presents the SPEAR3 beamline parameters that were considered in the design, the safety design considerations, and the main pre-calculated results that are needed for generic shielding design. In the end, the rules and practices for generic SSRL beamline design are summarized.

  13. Generic immunosuppression in transplantation: current evidence and controversial issues.

    Science.gov (United States)

    El Hajj, Sandra; Kim, Miae; Phillips, Karen; Gabardi, Steven

    2015-05-01

    The overall success of organ transplantation in the 21st century has been predicated, in part, on the use of newer, more potent, and selective immunosuppressive agents. However, the high cost of lifelong immunosuppression represents a financial burden for many patients. In the past 15 years, regulatory agencies in Europe and America have approved several generic immunosuppressants. One concern is whether the conversion between innovator and generic immunosuppressants will prove to be problematic. This manuscript aims to compare and contrast the bioequivalence requirements among regulatory authorities in the USA, Europe, and Canada, evaluate published studies of generic immunosuppressants in transplant recipients, summarize consensus statements made by transplant organizations and discuss how to engage patients in discussion regarding the choice between innovator and generic immunosuppressants.

  14. Generic antibiotic industries: Challenges and implied strategies with regulatory perspectives

    Directory of Open Access Journals (Sweden)

    M Venkatesh

    2011-01-01

    Full Text Available Ever since the discovery of antibiotics, the quality of human life greatly improved in the 20 th century. The discovery of penicillin transformed the medicine industry and initiated a search for a better antibiotic every time resulting in several synthetic and semi-synthetic antibiotics. Beginning with the 1937 sulfa drug tragedy, the drug regulations had a parallel growth along with the antibiotics and the antibiotic-based generic Pharma industries. This review article is focused on the scenario depicting current global Pharma industries based on generic antibiotics. Several regulatory aspects involved with these industries have been discussed along with the complexity of the market, issues that could affect their growth, their struggle for quality, and their compliance with the tightened regulations. With the skyrocketing commercialization of antibiotics through generics and the leveraging technologic renaissance, generic industries are involved in providing maximum safer benefits for the welfare of the people, highlighting its need today.

  15. Generic communications index. Listings of communications 1971-1989

    Energy Technology Data Exchange (ETDEWEB)

    Hagemeyer, D; Towle, H

    1991-05-01

    As part of its program to feed back information on operating experience to industry, the U.S. Nuclear Regulatory Commission (NRC) issues generic communications called bulletins (about 5/yr), circulars (now discontinued), generic letters (about 20/yr), and information notices (about 100/yr). The report presents an updated Generic Communications Index (GCI; previously published in NUREG/CR-4690, Vol. 1, December 1987) of all such communications from 1971, when such documentation started, to 1989. The GCI consists of records, one for each communication, containing fields for identification number, title, NRC technical contact, general system or topic, specific component or topic, cause or defect, potential effect, remarks, and vendors involved. To facilitate information retrieval, the report also contains topical listings of generic communications numbers. (author)

  16. Patients' concern about their medicine after a generic switch

    DEFF Research Database (Denmark)

    Østergaard Rathe, Jette; Søndergaard, Jens; Jarbøl, Dorte E

    2014-01-01

    PURPOSE: This study aims to investigate the possible association between patients' concerns about their medicine and generic switch. METHODS: Cross-sectional survey was carried out comprising responses from 2217 randomly selected persons aged 20 years or older and living in the Region of Southern...... Denmark, who had redeemed generically substitutable drugs in September 2008. For each patient, we focused on the purchase of one generically substitutable drug (index drug). We applied the specific concerns subscale from the Beliefs about Medicine Questionnaire (BMQ) to analyse lack of confidence....... RESULTS: No statistically significant associations were found between concerns about the index medicine and the generic switch (-0.02 95% CI: -0.10; 0.05). Viewing medicines as harmful in general was associated with increased concerns (BMQ general harm: 0.39 95% CI: 0.30; 0.47 and BMQ general overuse: 0...

  17. Generic antibiotic industries: Challenges and implied strategies with regulatory perspectives

    Science.gov (United States)

    Venkatesh, M.; Bairavi, V. G.; Sasikumar, K. C.

    2011-01-01

    Ever since the discovery of antibiotics, the quality of human life greatly improved in the 20th century. The discovery of penicillin transformed the medicine industry and initiated a search for a better antibiotic every time resulting in several synthetic and semi-synthetic antibiotics. Beginning with the 1937 sulfa drug tragedy, the drug regulations had a parallel growth along with the antibiotics and the antibiotic-based generic Pharma industries. This review article is focused on the scenario depicting current global Pharma industries based on generic antibiotics. Several regulatory aspects involved with these industries have been discussed along with the complexity of the market, issues that could affect their growth, their struggle for quality, and their compliance with the tightened regulations. With the skyrocketing commercialization of antibiotics through generics and the leveraging technologic renaissance, generic industries are involved in providing maximum safer benefits for the welfare of the people, highlighting its need today.. PMID:21430959

  18. A generic reclassification of the Afrotropical Bolboceratini (Coleoptera: Geotrupidae)

    NARCIS (Netherlands)

    Krikken, J.

    1984-01-01

    The generic classification of the Afrotropical Bolboceratini is discussed. Fourteen genera are recognized, five of them new: Bolboceratellus, Bolbodius, Bolboceratex, Namibiobolbus and Meridiobolbus. Microbolbus Vulcano et al. is synonymized with Mimobolbus Vulcano et al. Bolbaffroides and

  19. The generics in transplantation and the rules on their use.

    Science.gov (United States)

    Masri, Marwan

    2003-06-01

    By definition a product identified by its official chemical name rather than an advertised brand name is called a generic. If a drug exert its pharmacological effects at the same site, have the same potency, same dosage form and same bioavailability as a brand name, reference listed drug (RLD), is considered as a generic. However inactive ingredients can differ between brand name and generic. It is through the regulations of the FDA that the generics gained many ground in the drug market, they currently account to more than 42% of the total prescription in the USA. These regulations include the abbreviated new drug application (ANDA) for the registration process and drug substitution at the pharmacy level without patient or physician consent. This coupled with a keen interest of third party payers and the health authorities to reduce the high transplant health budget (over 2 Billion US $) made it a necessity to introduce the generics into the field of transplantation. Using the above mentioned definition we can theoretically say that all anti-lymphocytes, produced in the same animal species, are generic of each. Moreover, monoclonal antibodies that are directed against the same target and have the same bioavailability are also consider generics to each other. Of all the immunosuppressive drugs that have been introduced into the field of transplantation none has been as dominant as Cyclosporine. Cyclosporine became and still is the backbone for any immunosuppressive protocol. In the year 1992, Consupren, the first, non-FDA approved, generic to Sandimmun was introduced. Although Consupren was not bioequivalent to Neoral, however, long-term results in kidney transplantation have been similar for both drugs. The introduction of Consupren resulted in a near 40% reduction in the total cost of immunosuppressive therapy. Interestingly the cost of the brand name drug Neoral was also reduced by 20%. The cost reduction allowed the introduction of the new immunosuppressive

  20. The short-term impact of Ontario's generic pricing reforms.

    Directory of Open Access Journals (Sweden)

    Michael R Law

    Full Text Available Canadians pay amongst the highest generic drug prices in the world. In July 2010, the province of Ontario enacted a policy that halved reimbursement for generic drugs from the public drug plan, and substantially lowered prices for private purchases. We quantified the impact of this policy on overall generic drug expenditures in the province, and projected the impact in other provinces had they mimicked this pricing change.We used quarterly prescription generic drug dispensing data from the IMS-Brogan CompuScript Audit. We used the price per unit in both the pre- and post-policy period and two economics price indexes to estimate the expenditure reduction in Ontario. Further, we used the post-policy Ontario prices to estimate the potential reduction in other provinces.We estimate that total expenditure on generic drugs in Ontario during the second half of 2010 was between $181 and $194 million below what would be expected if prices had remained at pre-policy level. Over half of the reduction in spending was due to savings on just 10 generic ingredients. If other provinces had matched Ontario's prices, their expenditures over during the latter half of 2010 would have been $445 million lower.We found that if Ontario's pricing scheme were adopted nationally, overall spending on generic drugs in Canada would drop at least $1.28 billion annually--a 5% decrease in total prescription drug expenditure. Other provinces should seriously consider both changes to their generic drug prices and the use of more competitive bulk purchasing policies.

  1. Comparative effectiveness of generic versus brand-name antiepileptic medications.

    Science.gov (United States)

    Gagne, Joshua J; Kesselheim, Aaron S; Choudhry, Niteesh K; Polinski, Jennifer M; Hutchins, David; Matlin, Olga S; Brennan, Troyen A; Avorn, Jerry; Shrank, William H

    2015-11-01

    The objective of this study was to compare treatment persistence and rates of seizure-related events in patients who initiate antiepileptic drug (AED) therapy with a generic versus a brand-name product. We used linked electronic medical and pharmacy claims data to identify Medicare beneficiaries who initiated one of five AEDs (clonazepam, gabapentin, oxcarbazepine, phenytoin, zonisamide). We matched initiators of generic versus brand-name versions of these drugs using a propensity score that accounted for demographic, clinical, and health service utilization variables. We used a Cox proportional hazards model to compare rates of seizure-related emergency room (ER) visit or hospitalization (primary outcome) and ER visit for bone fracture or head injury (secondary outcome) between the matched generic and brand-name initiators. We also compared treatment persistence, measured as time to first 14-day treatment gap, between generic and brand-name initiators. We identified 19,760 AED initiators who met study eligibility criteria; 18,306 (93%) initiated a generic AED. In the matched cohort, we observed 47 seizure-related hospitalizations and ER visits among brand-name initiators and 31 events among generic initiators, corresponding to a hazard ratio of 0.53 (95% confidence interval, 0.30 to 0.96). Similar results were observed for the secondary clinical endpoint and across sensitivity analyses. Mean time to first treatment gap was 124.2 days (standard deviation [sd], 125.8) for brand-name initiators and 137.9 (sd, 148.6) for generic initiators. Patients who initiated generic AEDs had fewer adverse seizure-related clinical outcomes and longer continuous treatment periods before experiencing a gap than those who initiated brand-name versions. Copyright © 2015 Elsevier Inc. All rights reserved.

  2. Generic trajectory representation and trajectory following for wheeled robots

    DEFF Research Database (Denmark)

    Kjærgaard, Morten; Andersen, Nils Axel; Ravn, Ole

    2014-01-01

    will drive. Safe: Avoid fatal collisions. Based on a survey of existing methods and algorithms the article presents a generic way to represent constraints for different types of robots, a generic way to represent trajectories using Bëzier curves, a method to convert the trajectory so it can be driven...... in a smooth motion, a method to create a safe velocity profile for the robot, and a path following controller....

  3. Generic and Brand Advertising Strategies in a Dynamic Duopoly

    OpenAIRE

    Frank M. Bass; Anand Krishnamoorthy; Ashutosh Prasad; Suresh P. Sethi

    2005-01-01

    To increase the sales of their products through advertising, firms must integrate their brand-advertising strategy for capturing market share from competitors and their generic-advertising strategy for increasing primary demand for the category. This paper examines whether, when, and how much brand advertising versus generic advertising should be done. Using differential game theory, optimal advertising decisions are obtained for a dynamic duopoly with symmetric or asymmetric competitors. We ...

  4. GENERIC DRUG IN GLOBAL MARKET AND REGULATORY ENVIRONMENT

    OpenAIRE

    Pankaj Kumar*, Bharti Mangla2, Satbir Singh, Arapna Rana

    2017-01-01

    Different regulatory authorities regulate the drug development in various countries of the world. Various Regulatory authority for generic drug application Food and Drug Administration (FDA), European Medicines Agency (EMA), Pharmaceutical and Medical Devices Agency (PMDA), Health Product and Food Branch (HPFB) Central Drug Standard of Organization (CDSO). Generic manufacturers may file an abbreviated New Drug Application (ANDA) that incorporates the safety/effectiveness data submitted by ori...

  5. Loads and loads and loads: The influence of prospective load, retrospective load, and ongoing task load in prospective memory

    Directory of Open Access Journals (Sweden)

    Beat eMeier

    2015-06-01

    Full Text Available In prospective memory tasks different kinds of load can occur. Adding a prospective memory task can impose a load on ongoing task performance. Adding ongoing task load can affect prospective memory performance. The existence of multiple target events increases prospective load and adding complexity to the to-be-remembered action increases retrospective load. In two experiments, we systematically examined the effects of these different types of load on prospective memory performance. Results showed an effect of prospective load on costs in the ongoing task for categorical targets (Experiment 2, but not for specific targets (Experiment 1. Retrospective load and ongoing task load both affected remembering the retrospective component of the prospective memory task. We suggest that prospective load can enhance costs in the ongoing task due to additional monitoring requirements. Retrospective load and ongoing task load seem to impact the division of resources between the ongoing task and retrieval of the retrospective component, which may affect disengagement from the ongoing task. In general, the results demonstrate that the different types of load affect prospective memory differentially.

  6. Consumers' views on generic medicines: a review of the literature.

    Science.gov (United States)

    Hassali, Mohamed A A; Shafie, Asrul A; Jamshed, Shazia; Ibrahim, Mohamed I M; Awaisu, Ahmed

    2009-04-01

    To review the literature on consumers' knowledge, attitudes and opinions of the use of generic medicines. A narrative review of studies conducted from 1970 to 2008 on consumers perceptions and views towards generic medicines was performed. An extensive literature search was undertaken using indexing services available at the authors' institution library. The following keywords were used for the search: brand, generic, multisource, medications, medicines, drugs, pharmaceuticals and consumers, customers, and patients. Electronic databases searched were Medline, Inside Web, ISI Web of Knowledge, Science Direct, Springer Link, JSTOR, Proquest, Ebsco Host and Google Scholar. These electronic databases were searched for full text papers published in English from 1970 to October 2008. Twenty studies were identified. Eleven were from the USA, four were from Europe, two were from Canada and one each was from Australia, Brazil and Malaysia. In general, consumers showed mixed reactions towards the use of generic medicines. This was evident from the divergence of views observed by country development level, consumers' socioeconomic characteristics, drug product characteristics, pharmaceutical reimbursement system, policy environment, contact with health care professionals, past experience with medications, and knowledge of the seriousness of a medical condition. Patient confidence and knowledge pertaining to generic medicines use have increased over the past four decades, especially in developed countries. Mass educational efforts, financial incentives, and greater communication among patients and health care professionals were seen as major drivers to the uptake of generic medicines among consumers.

  7. Leveraging consumer's behaviour to promote generic drugs in Italy.

    Science.gov (United States)

    Zerbini, Cristina; Luceri, Beatrice; Vergura, Donata Tania

    2017-04-01

    The aim of this study was to fill the lack of knowledge regarding a more grounded exploration of the consumer's decision-making process in the context of generic drugs. In this perspective, a model, within the theoretical framework of the Theory of Planned Behaviour (TPB), for studying the consumers' purchase intention of generic drugs was developed. An online survey on 2,222 Italian people who bought drugs in the past was conducted. The proposed model was tested through structural equation modelling (SEM). Almost all the constructs considered in the model, except the perceived behavioural control, contribute to explain the consumer's purchase intention of generic drugs, after controlling for demographic variables (age, income, education). Specifically, attitude, subjective norm, past behaviour, self-identity and trust in the pharmacist have a positive influence on the intention to buy generic drugs. On the contrary, perceived risk towards products and brand sensitivity act negatively. The results of the present study could be useful to public policy makers in developing effective policies and educational campaigns aimed at promoting generic drugs. Specifically, marketing efforts should be directed to inform consumers about the generic drugs' characteristics to mitigate the perceived risk towards these products and to raise awareness during their decision-making process. Copyright © 2017 Elsevier B.V. All rights reserved.

  8. Generic drugs: Review and experiences from South India

    Directory of Open Access Journals (Sweden)

    Philip Mathew

    2015-01-01

    Full Text Available The cost of pharmaceuticals, as a percentage of total healthcare spending, has been rising worldwide. This has resulted in strained national budgets and a high proportion of people without access to essential medications. Though India has become a global hub of generic drug manufacturing, the expected benefits of cheaper drugs are not translating into savings for ordinary people. This is in part due to the rise of branded generics, which are marketed at a price point close to the innovator brands. Unbranded generic medicines are not finding their way into prescriptions due to issues of confidence and perception, though they are proven to be much cheaper and comparable in efficacy to branded medicines. The drug inventory of unbranded generic manufacturers fares reasonably when reviewed using the World Health Organization-Health Action International (WHO-HAI tool for analysing drug availability. Also, unbranded generic medicines are much cheaper when compared to the most selling brands and they can bring down the treatment costs in primary care and family practice. We share our experience in running a community pharmacy for an urban health center in the Pathanamthitta district of Kerala State, which is run solely on generic medicines. The drug availability at the community pharmacy was 73.3% when analyzed using WHO-HAI tool and the savings for the final consumers were up to 93.1%, when compared with most-selling brand of the same formulation.

  9. [Generic drugs and the consumption trends of antihypertensives in Morocco].

    Science.gov (United States)

    Berrada El Azizi, Ghizlane; Ahid, Samir; Ghanname, Imane; Ghannam, Imane; Belaiche, Abdelmajid; Hassar, Mohammed; Cherrah, Yahia

    2013-01-01

    To evaluate the evolution of consumption of antihypertensive drugs generic among 1991-2010, to assess the impacts after the institution of Mandatory Health Insurance and the marketing of generic drugs. We used sales data from the Moroccan subsidiary of IMS Health Intercontinental Marketing Service. Consumption of generic antihypertensive drugs increased from 0.08 to 10.65 DDD/1 000 inhabitants/day between 1991 and 2010. In 2010, generic of the calcium channel blockers (CCBs) represented 4.08 DDD/1 000 inhabitants/day (82.09%), followed by angiotensin converting enzyme inhibitors (ACEI) by 2.40 DDD/1 000 inhabitants/day (48.29%). The generics market of CCBs is the most dominant and represented in 2010, 79.21% in volume and 62.58% in value. In developing countries like Morocco, the generic drug is a key element for access to treatment especially for the poor population. © 2013 Société Française de Pharmacologie et de Thérapeutique.

  10. IAEA's experience in compiling a generic component reliability data base

    International Nuclear Information System (INIS)

    Tomic, B.; Lederman, L.

    1988-01-01

    Reliability data are an essential part of probabilistic safety assessment. The quality of data can determine the quality of the study as a whole. It is obvious that component failure data originated from the plant being analyzed would be most appropriate. However, in few cases complete reliance on plant experience is possible, mainly because of the rather limited operating experience. Nuclear plants, although of different design, often use fairly similar components, so some of the experience could be combined and transferred from one plant to another. In addition information about component failures is available also from experts with knowledge on component design, manufacturing and operation. That bring us to the importance of assessing generic data. (Generic is meant to be everything that is not plant specific regarding the plant being analyzed). The generic data available in the open literature, can be divided in three broad categories. The first one includes data base used in previous analysis. These can be plant specific or updated from generic with plant specific information (latter case deserve special attention). The second one is based on compilation of plants' operating experience usually based on some kind of event reporting system. The third category includes data sources based on expert opinions (single or aggregate) or combination of expert opinions and other nuclear and non-nuclear experience. This paper reflects insights gained in compiling data from generic data sources and highlights advantages and pitfalls of using generic component reliability data in PSAs

  11. Using Service Oriented Architecture in a Generic Virtual Power Plant

    DEFF Research Database (Denmark)

    Andersen, Peter Bach; Poulsen, Bjarne; Træholt, Chresten

    2009-01-01

    The purpose of this paper is to find and describe a suitable software framework that can be used to help implement the concept of a Generic Virtual Power Plant in the future power system. The Generic Virtual Power Plant concept, along with the utilization of distributed energy resources, has many...... the Generic Virtual Power Plant, an array of different software design principles, patterns and architectures must be applied. Especially Service Oriented Architecture (SOA) can aid in implementing the Generic Virtual Power Plant.......The purpose of this paper is to find and describe a suitable software framework that can be used to help implement the concept of a Generic Virtual Power Plant in the future power system. The Generic Virtual Power Plant concept, along with the utilization of distributed energy resources, has many...... interesting properties that can influence the future shape of power markets. The concept holds many promises including cheaper power to the consumer, a more flexible and responsive power production and the support of a more environment-friendly development. In order to realize a software solution supporting...

  12. A generic RNA-pulsed dendritic cell vaccine strategy for renal cell carcinoma

    Science.gov (United States)

    Geiger, Christiane; Regn, Sybille; Weinzierl, Andreas; Noessner, Elfriede; Schendel, Dolores J

    2005-01-01

    We present a generic dendritic cell (DC) vaccine strategy for patients with renal cell carcinoma (RCC) based on the use of RNA as a source of multiplex tumor-associated antigens (TAAs). Instead of preparing RNA from tumor tissue of each individual RCC patient, we propose to substitute RNA prepared from a well characterized highly immunogenic RCC cell line (RCC-26 tumor cells) as a generic source of TAAs for loading of DCs. We demonstrate here that efficient RNA transfer can be achieved using lipofection of immature DCs, which are subsequently matured with a cytokine cocktail to express high levels of MHC and costimulatory molecules as well as the chemokine receptor CCR7. Neither RNA itself nor the lipid component impacted on the phenotype or the cytokine secretion of mature DCs. Following RNA loading, DCs derived from HLA-A2-positive donors were able to activate effector-memory cytotoxic T lymphocytes (CTLs) specific for a TAA ligand expressed by the RCC-26 cell line. CTL responses to RNA-loaded DCs reached levels comparable to those stimulated directly by the RCC-26 tumor cells. Furthermore, DCs expressing tumor cell RNA primed naïve T cells, yielding T cell lines with cytotoxicity and cytokine secretion after contact with RCC tumor cells. RCC-26 cell lines are available as good manufacturing practice (GMP)-certified reagents enabling this source of RNA to be easily standardized and adapted for clinical testing. In addition, well defined immune monitoring tools, including the use of RNA expressing B cell lines, are available. Thus, this DC vaccine strategy can be directly compared with an ongoing gene therapy trial using genetically-engineered variants of the RCC-26 cell line as vaccines for RCC patients with metastatic disease. PMID:16045799

  13. A generic RNA-pulsed dendritic cell vaccine strategy for renal cell carcinoma

    Directory of Open Access Journals (Sweden)

    Noessner Elfriede

    2005-07-01

    Full Text Available Abstract We present a generic dendritic cell (DC vaccine strategy for patients with renal cell carcinoma (RCC based on the use of RNA as a source of multiplex tumor-associated antigens (TAAs. Instead of preparing RNA from tumor tissue of each individual RCC patient, we propose to substitute RNA prepared from a well characterized highly immunogenic RCC cell line (RCC-26 tumor cells as a generic source of TAAs for loading of DCs. We demonstrate here that efficient RNA transfer can be achieved using lipofection of immature DCs, which are subsequently matured with a cytokine cocktail to express high levels of MHC and costimulatory molecules as well as the chemokine receptor CCR7. Neither RNA itself nor the lipid component impacted on the phenotype or the cytokine secretion of mature DCs. Following RNA loading, DCs derived from HLA-A2-positive donors were able to activate effector-memory cytotoxic T lymphocytes (CTLs specific for a TAA ligand expressed by the RCC-26 cell line. CTL responses to RNA-loaded DCs reached levels comparable to those stimulated directly by the RCC-26 tumor cells. Furthermore, DCs expressing tumor cell RNA primed naïve T cells, yielding T cell lines with cytotoxicity and cytokine secretion after contact with RCC tumor cells. RCC-26 cell lines are available as good manufacturing practice (GMP-certified reagents enabling this source of RNA to be easily standardized and adapted for clinical testing. In addition, well defined immune monitoring tools, including the use of RNA expressing B cell lines, are available. Thus, this DC vaccine strategy can be directly compared with an ongoing gene therapy trial using genetically-engineered variants of the RCC-26 cell line as vaccines for RCC patients with metastatic disease.

  14. APS high heat load monochromator

    International Nuclear Information System (INIS)

    Lee, W.K.; Mills, D.

    1993-02-01

    This document contains the design specifications of the APS high heat load (HHL) monochromator and associated accessories as of February 1993. It should be noted that work is continuing on many parts of the monochromator including the mechanical design, crystal cooling designs, etc. Where appropriate, we have tried to add supporting documentation, references to published papers, and calculations from which we based our decisions. The underlying philosophy behind performance specifications of this monochromator was to fabricate a device that would be useful to as many APS users as possible, that is, the design should be as generic as possible. In other words, we believe that this design will be capable of operating on both bending magnet and ID beamlines (with the appropriate changes to the cooling and crystals) with both flat and inclined crystal geometries and with a variety of coolants. It was strongly felt that this monochromator should have good energy scanning capabilities over the classical energy range of about 4 to 20 keywith Si (111) crystals. For this reason, a design incorporating one rotation stage to drive both the first and second crystals was considered most promising. Separate rotary stages for the first and second crystals can sometimes provide more flexibility in their capacities to carry heavy loads (for heavily cooled first crystals or sagittal benders of second crystals), but their tuning capabilities were considered inferior to the single axis approach

  15. Comparison of Outcomes Following a Switch From a Brand to an Authorized Versus Independent Generic Drug.

    Science.gov (United States)

    Hansen, R A; Qian, J; Berg, R L; Linneman, J G; Seoane-Vazquez, E; Dutcher, S; Raofi, S; Page, C D; Peissig, P L

    2018-02-01

    Authorized generics are identical in formulation to brand drugs, manufactured by the brand company but marketed as a generic. Generics, marketed by generic manufacturers, are required to demonstrate pharmaceutical and bioequivalence to the brand drug, but repetition of clinical trials is not required. This retrospective cohort study compared outcomes for generics and authorized generics, which serves as a generic vs. brand proxy that minimizes bias against generics. For the seven drugs studied between 1999 and 2014, 5,234 unique patients were on brand drugs prior to generic entry and 4,900 (93.6%) switched to a generic. During the 12 months following the brand-to-generic switch, patients using generics vs. authorized generics were similar in terms of outpatient visits, urgent care visits, hospitalizations, and medication discontinuation. The likelihood of emergency department (ED) visits was slightly higher for authorized generics compared with generics. These data suggest that generics were clinically no worse than their proxy brand comparators. © 2017 American Society for Clinical Pharmacology and Therapeutics.

  16. Generics, Supergenerics and Patent Strategies--SMi's 13th Annual Meeting.

    Science.gov (United States)

    Edwards, Catherine

    2010-07-01

    SMi's 13th Annual Meeting on Generics, Supergenerics and Patent Strategies, held in London, included topics covering new trends in the generics field, the difficulties faced by companies in entering the generics market and recent developments in IP. This conference report highlights selected presentations on generics in India, protecting pharmaceutical products in China, changes in generics law and litigation in the US and Europe, challenges for market selection and entry for generics companies, the influence of changes in the healthcare market on the generics industry, supergenerics, and biosimilars.

  17. Distribution load estimation (DLE)

    Energy Technology Data Exchange (ETDEWEB)

    Seppaelae, A; Lehtonen, M [VTT Energy, Espoo (Finland)

    1998-08-01

    The load research has produced customer class load models to convert the customers` annual energy consumption to hourly load values. The reliability of load models applied from a nation-wide sample is limited in any specific network because many local circumstances are different from utility to utility and time to time. Therefore there is a need to find improvements to the load models or, in general, improvements to the load estimates. In Distribution Load Estimation (DLE) the measurements from the network are utilized to improve the customer class load models. The results of DLE will be new load models that better correspond to the loading of the distribution network but are still close to the original load models obtained by load research. The principal data flow of DLE is presented

  18. A generic coding approach for the examination of meal patterns.

    Science.gov (United States)

    Woolhead, Clara; Gibney, Michael J; Walsh, Marianne C; Brennan, Lorraine; Gibney, Eileen R

    2015-08-01

    Meal pattern analysis can be complex because of the large variability in meal consumption. The use of aggregated, generic meal data may address some of these issues. The objective was to develop a meal coding system and use it to explore meal patterns. Dietary data were used from the National Adult Nutrition Survey (2008-2010), which collected 4-d food diary information from 1500 healthy adults. Self-recorded meal types were listed for each food item. Common food group combinations were identified to generate a number of generic meals for each meal type: breakfast, light meals, main meals, snacks, and beverages. Mean nutritional compositions of the generic meals were determined and substituted into the data set to produce a generic meal data set. Statistical comparisons were performed against the original National Adult Nutrition Survey data. Principal component analysis was carried out by using these generic meals to identify meal patterns. A total of 21,948 individual meals were reduced to 63 generic meals. Good agreement was seen for nutritional comparisons (original compared with generic data sets mean ± SD), such as fat (75.7 ± 29.4 and 71.7 ± 12.9 g, respectively, P = 0.243) and protein (83.3 ± 26.9 and 80.1 ± 13.4 g, respectively, P = 0.525). Similarly, Bland-Altman plots demonstrated good agreement (<5% outside limits of agreement) for many nutrients, including protein, saturated fat, and polyunsaturated fat. Twelve meal types were identified from the principal component analysis ranging in meal-type inclusion/exclusion, varying in energy-dense meals, and differing in the constituents of the meals. A novel meal coding system was developed; dietary intake data were recoded by using generic meal consumption data. Analysis revealed that the generic meal coding system may be appropriate when examining nutrient intakes in the population. Furthermore, such a coding system was shown to be suitable for use in determining meal-based dietary patterns. © 2015

  19. How Abbott’s Fenofibrate Franchise Avoided Generic Competition

    Science.gov (United States)

    Downing, Nicholas S.; Ross, Joseph S.; Jackevicius, Cynthia A.; Krumholz, Harlan M.

    2013-01-01

    The ongoing debate concerning the efficacy of fenofibrate has overshadowed an important aspect of the drug’s history: Abbott, the maker of branded fenofibrate, has produced several bioequivalent reformulations, which dominate the market even though generic fenofibrate has been available for almost a decade. This continued use of branded formulations, which cost twice as much as generic versions of fenofibrate, imposes an annual cost of approximately $700 million on our healthcare system. Abbott maintained its dominance of the fenofibrate market, in part, through a complex switching strategy involving the sequential launch of branded reformulations that had not been shown to be superior to the first generation product and patent litigation that delayed the approval of generic formulations. The small differences in dose of the newer branded formulations prevented substitution with generics of older generation products. As soon as direct generic competition seemed likely at the new dose level where substitution would be allowed, Abbott would launch another reformulation and the cycle would repeat. Our objective, using the fenofibrate example, is to describe how current policy can allow pharmaceutical companies to maintain market share using reformulations of branded medications without demonstrating the superiority of next generation products. PMID:22493409

  20. Avoidance of generic competition by Abbott Laboratories' fenofibrate franchise.

    Science.gov (United States)

    Downing, Nicholas S; Ross, Joseph S; Jackevicius, Cynthia A; Krumholz, Harlan M

    2012-05-14

    The ongoing debate concerning the efficacy of fenofibrate has overshadowed an important aspect of the drug's history: Abbott Laboratories, the maker of branded fenofibrate, has produced several bioequivalent reformulations that dominate the market, although generic fenofibrate has been available for almost a decade. This continued use of branded formulations, which cost twice as much as generic versions of fenofibrate, imposes an annual cost of approximately $700 million on the US health care system. Abbott Laboratories maintained its dominance of the fenofibrate market in part through a complex switching strategy involving the sequential launch of branded reformulations that had not been shown to be superior to the first-generation product and patent litigation that delayed the approval of generic formulations. The small differences in dose of the newer branded formulations prevented their substitution with generics of older-generation products. As soon as direct generic competition seemed likely at the new dose level, where substitution would be allowed, Abbott would launch another reformulation, and the cycle would repeat. Based on the fenofibrate example, our objective is to describe how current policy can allow pharmaceutical companies to maintain market share using reformulations of branded medications, without demonstrating the superiority of next-generation products.

  1. Method for developing cost estimates for generic regulatory requirements

    International Nuclear Information System (INIS)

    1985-01-01

    The NRC has established a practice of performing regulatory analyses, reflecting costs as well as benefits, of proposed new or revised generic requirements. A method had been developed to assist the NRC in preparing the types of cost estimates required for this purpose and for assigning priorities in the resolution of generic safety issues. The cost of a generic requirement is defined as the net present value of total lifetime cost incurred by the public, industry, and government in implementing the requirement for all affected plants. The method described here is for commercial light-water-reactor power plants. Estimating the cost for a generic requirement involves several steps: (1) identifying the activities that must be carried out to fully implement the requirement, (2) defining the work packages associated with the major activities, (3) identifying the individual elements of cost for each work package, (4) estimating the magnitude of each cost element, (5) aggregating individual plant costs over the plant lifetime, and (6) aggregating all plant costs and generic costs to produce a total, national, present value of lifetime cost for the requirement. The method developed addresses all six steps. In this paper, we discuss on the first three

  2. A new generic system for the pantropical Caesalpinia group (Leguminosae

    Directory of Open Access Journals (Sweden)

    Edeline Gagnon

    2016-10-01

    Full Text Available The Caesalpinia group is a large pantropical clade of ca. 205 species in subfamily Caesalpinioideae (Leguminosae in which generic delimitation has been in a state of considerable flux. Here we present new phylogenetic analyses based on five plastid and one nuclear ribosomal marker, with dense taxon sampling including 172 (84% of the species and representatives of all previously described genera in the Caesalpinia group. These analyses show that the current classification of the Caesalpinia group into 21 genera needs to be revised. Several genera (Poincianella, Erythrostemon, Cenostigma and Caesalpinia sensu Lewis, 2005 are non-monophyletic and several previously unclassified Asian species segregate into clades that merit recognition at generic rank. In addition, the near-completeness of our taxon sampling identifies three species that do not belong in any of the main clades and these are recognised as new monospecific genera. A new generic classification of the Caesalpinia group is presented including a key for the identification of genera, full generic descriptions, illustrations (drawings and photo plates of all genera, and (for most genera the nomenclatural transfer of species to their correct genus. We recognise 26 genera, with reinstatement of two previously described genera (Biancaea Tod., Denisophytum R. Vig., re-delimitation and expansion of several others (Moullava, Cenostigma, Libidibia and Erythrostemon, contraction of Caesalpinia s.s. and description of four new ones (Gelrebia, Paubrasilia, Hererolandia and Hultholia, and make 75 new nomenclatural combinations in this new generic system.

  3. Generic nuclear power plant component failure data bank

    International Nuclear Information System (INIS)

    Araujo Goes, A.G. de; Gibelli, S.M.O.

    1988-11-01

    This report consist in the development of a generic nuclear power plant component failure data bank. This data bank was implemented in a PC-XT microcomputer, IBM compatible, using the Open Access II program. Generic failure data tables for Westinghouse nuclear power plants and for general PWR power plants are presented. They are the final product of a research which included a preselection and a selection of data collected from the available sources in the library of CNEN (National Nuclear Energy Commission) and from the CIN/CNEN (Neclear Information Center). Futhermore, a proposal of evaluating models of average failure rates of pumps and valves are also presented. Through the electronic data bank one can easily have a generic view of failure rate ranges as well as failure models foe a certain component. It is very importante to develop procedures to collect and store generic failure data that can be quickly accessed, in order to update the Probabilistic Safety Study of Angra-1 and to used in studies which may have component failures of nuclear power plant safety systems. In the future, data specialization can be achieved by means of statistical calculations involving specific data collected from the operational experience of Angra-1 nuclear power plant and the generic data bank. (author) [pt

  4. The generic drug user fee amendments: an economic perspective

    Science.gov (United States)

    Berndt, Ernst R; Murphy, Stephen J

    2018-01-01

    Abstract Since the vast majority of prescription drugs consumed by Americans are off patent (‘generic’), their regulation and supply is of wide interest. We describe events leading up to the US Congress's 2012 passage of the Generic Drug User Fee Amendments (GDUFA I) as part of the Food and Drug Administration Safety and Innovation Act (FDASIA). Under GDUFA I, generic manufacturers agreed to pay approximately $300 million in fees each year of the five-year program. In exchange, the US Food and Drug Administration (FDA) committed to performance goals. We describe GDUFA I’s FDA commitments, provisions, goals, and annual fee structure and compare it to that entailed in the authorization and implementation of GDUFA II on October 1, 2017. We explain how user fees required under GDUFA I erected barriers to entry and created scale and scope economies for incumbent manufacturers. Congress changed user fees under GDUFA II in part to lessen these incentives. In order to initiate and sustain user fees under GDUFA legislation, FDA requires the submission of self-reported data on generic manufacturers including domestic and foreign facilities. These data are public and our examination of them provides an unprecedented window into the recent organization of generic drug manufacturers supplying the US market. Our results suggest that generic drug manufacturing is increasingly concentrated and foreign. We discuss the implications of this observed market structure for GDUFA II’s implementation among other outcomes. PMID:29707218

  5. Distribution load estimation - DLE

    Energy Technology Data Exchange (ETDEWEB)

    Seppaelae, A. [VTT Energy, Espoo (Finland)

    1996-12-31

    The load research project has produced statistical information in the form of load models to convert the figures of annual energy consumption to hourly load values. The reliability of load models is limited to a certain network because many local circumstances are different from utility to utility and time to time. Therefore there is a need to make improvements in the load models. Distribution load estimation (DLE) is the method developed here to improve load estimates from the load models. The method is also quite cheap to apply as it utilises information that is already available in SCADA systems

  6. Distribution load estimation - DLE

    Energy Technology Data Exchange (ETDEWEB)

    Seppaelae, A [VTT Energy, Espoo (Finland)

    1997-12-31

    The load research project has produced statistical information in the form of load models to convert the figures of annual energy consumption to hourly load values. The reliability of load models is limited to a certain network because many local circumstances are different from utility to utility and time to time. Therefore there is a need to make improvements in the load models. Distribution load estimation (DLE) is the method developed here to improve load estimates from the load models. The method is also quite cheap to apply as it utilises information that is already available in SCADA systems

  7. Separation flow control on a generic ground vehicle using steady microjet arrays

    Energy Technology Data Exchange (ETDEWEB)

    Aubrun, Sandrine; Kourta, Azeddine [Universite d' Orleans, Laboratoire PRISME, Orleans cedex (France); McNally, Jonathan; Alvi, Farrukh [Florida State University, FAMU-FSU College of Engineering, Tallahassee, FL (United States)

    2011-11-15

    A model of a generic vehicle shape, the Ahmed body with a 25 slant, is equipped with an array of blowing steady microjets 6 mm downstream of the separation line between the roof and the slanted rear window. The goal of the present study is to evaluate the effectiveness of this actuation method in reducing the aerodynamic drag, by reducing or suppressing the 3D closed separation bubble located on the slanted surface. The efficiency of this control approach is quantified with the help of aerodynamic load measurements. The changes in the flow field when control is applied are examined using PIV and wall pressure measurements and skin friction visualisations. By activating the steady microjet array, the drag coefficient was reduced by 9-14% and the lift coefficient up to 42%, depending on the Reynolds number. The strong modification of the flow topology under progressive flow control is particularly studied. (orig.)

  8. IAEA's experience in compiling a generic component reliability data base

    International Nuclear Information System (INIS)

    Tomic, B.; Lederman, L.

    1991-01-01

    Reliability data are essential in probabilistic safety assessment, with component reliability parameters being particularly important. Component failure data which is plant specific would be most appropriate but this is rather limited. However, similar components are used in different designs. Generic data, that is all data that is not plant specific to the plant being analyzed but which relates to components more generally, is important. The International Atomic Energy Agency has compiled the Generic Component Reliability Data Base from data available in the open literature. It is part of the IAEA computer code package for fault/event tree analysis. The Data Base contains 1010 different records including most of the components used in probabilistic safety analyses of nuclear power plants. The data base input was quality controlled and data sources noted. The data compilation procedure and problems associated with using generic data are explained. (UK)

  9. Formulation of Generic Simulation Models for Analyzing Construction Claims

    Directory of Open Access Journals (Sweden)

    Rifat Rustom

    2012-11-01

    Full Text Available While there are several techniques for analyzing the impact of claims on time schedule and productivity,very few are considered adequate and comprehensive to consider risks and uncertainties.A generic approach for claims analysis using simulation is proposed. The formulation of the generic methodology presented in this paper depends on three simulation models;As-Planned Model (APM,As-Built Model (ABM, and What-Would-HaveBeenModel(WWHBM. The proposed generic methodology as presented in this paper provides a good basis as a more elaborate approach to better analyze claims and their impacts on project time and productivity utilizing discrete event simulation.The approach proposed allows for scenario analysis to account for the disputed events and workflow disruptions. The proposed models will assist claimants in presenting their cases effectively and professionally.

  10. Development of a generic data base for failure rate

    International Nuclear Information System (INIS)

    Mosleh, A.; Apostolakis, G.

    1985-01-01

    The data analysis task in a probabilistic risk assessment (PRA) involves the assessment of data needs, the collection of information, and, finally, the analysis of the data to generate estimates for various parameters. This paper describes a framework for developing a data base for component failure rates and presents mathematical methods for the analysis of various types of information. The discussion is focused on the development of generic data bases used in PRAs. For plants without an operating history, the generic distributions are used directly to calculate component unavailability. In the case of plants that have operated for some time, the generic distributions can be used as priors in Bayesian analysis and, thus, specialized by plant-specific experience

  11. Promoting and regulating generic medicines: Brazil in comparative perspective

    Directory of Open Access Journals (Sweden)

    Elize Massard da Fonseca

    2017-04-01

    Full Text Available ABSTRACT Promoting the use of generic drugs can constitute a core instrument for countries’ national pharmaceutical policies, one that reduces drug expenditure while expanding health care access. Despite the potential importance of such policy measures and the differences among national practices, scholars embarking on comparative analysis lack a roadmap for determining which dimensions of generic drug policy to assess and compare. This report fills that gap by considering national rules and regulations across four dimensions deemed crucial to any evaluation: demonstrated therapeutic equivalence; pharmaceutical packaging and labeling; drug prescription; and drug substitution. Furthermore, this report examines how the diverse interests of public and private sector stakeholders might shape generic drug policy and its implementation. To illustrate the challenges and conflicts behind policy development and implementation, this report focuses on the case of Brazil.

  12. [Users sceptical about generic drugs: an anthropological approach].

    Science.gov (United States)

    Sarradon-Eck, A; Blanc, M-A; Faure, M

    2007-06-01

    Since the enactment of the 2002 legislative measures favoring the prescription of generic drugs, various quantitative studies have shown that approval by prescribers and users has risen in France. Nevertheless, scepticism remains as well as distrust towards these drugs focusing on their effectiveness compared with brand-name drugs, on potential dangers, and on the interruption they cause in prescription and consumption habits. Using a comprehensive approach, this article analyzes the social and cultural logic behind the negative image of generic drugs. The materials issued from an ethnographic study on the prescription of drugs for high blood pressure. Sixty-eight interviews were undertaken between April 2002 and October 2004 with people (39 women and 29 men, between the age of 40 and 95, 52 over the age of 60) treated for over a year for high blood pressure in rural areas in the Southeast of France. Thirteen people provided unsolicited opinions about generic drugs. Analysis of the information collected shows that users have various representations of generic drugs, including the idea of counterfeited and foreign drugs. These representations interfere with the adjustment process and the development of consumer loyalty. They are part of a set of social representations about drugs which form and express the user's reality. In these representations, the drug is an ambivalent object, carrier of both biological effectiveness and toxicity; it is also the metonymical extension of the prescriber, bestowing upon the prescription a symbolic value. By placing the generic drug in its network of symbolic and social meaning, this study highlights the coherence of the scepticism towards generic drugs by consumers (and prescribers) with a system of common opinion in which drugs are everyday things, personalized and compatible with users, symbolic exchange carriers in the physician-patient relationship, and in which confidence in the drug is also that given to the health care

  13. [Two cases of pulmonary aspergilosis, which deteriorated with generic itraconazole].

    Science.gov (United States)

    Saito, Wakana; Shishikura, Yutaka; Nishimaki, Katsushi; Kikuchi, Tadashi; Sasamori, Kan; Kikuchi, Yoshihiro; Miki, Hiroshi

    2014-07-01

    We experienced two cases of pulmonary aspergillosis, which deteriorated during treatment with generic itraconazole (ITCZ) because of low plasma concentration. One case was chronic pulmonary aspergillosis and the other was allergic bronchopulmonary aspergillosis (ABPA). Treatment of both cases was started with a brand-name-ITCZ, and changed to a generic ITCZ. Deterioration of pulmonary aspergillosis occurred after 8 months and 9 months from change to generic ITCZ respectively. In the first case, the ITCZ-plasma concentration was 46.9 ng/mL and of OH-ITCZ 96.5 ng/mL with generic ITCZ at the dose of 300 mg/day, but increased to 1,559.7 ng/mL and to 2,485.0 ng/mL with the brand-name-ITCZ 300 mg/day, respectively. In the second case, the ITCZ-plasma concentration was 27.2 ng/mL and of OH-ITCZ 20.1 ng/mL with 150 mg/day for generic ITCZ, but reached 857.3 ng/mL and to 1,144.2 ng/ml with the brand-name-ITCZ 300 mg/day, respectively. After treatment failure, the first case was changed to voriconazole, then brand-name-ITCZ 300 mg/day, and the second case to the brand-name-ITCZ 300 mg/day, with successful clinical course. Plasma concentrations of ITCZ can differ significantly depending on the patient or type of ITCZ. The ITCZ-plasma concentration should be controlled after changing from a brand-name-ITCZ to a generic ITCZ.

  14. Method to generate generic floor response spectra for operating nuclear power plant

    International Nuclear Information System (INIS)

    Curreri, J.; Costantino, C.; Subudhi, M.; Reich, M.

    1985-01-01

    The general approach in the development of the response spectra was to study the effects on the dynamic characteristics of each of the elements in the chain of events that goes between the loads and the responses. This includes the loads, the soils and the structures. A free-field earthquake response spectra was used to generate horizontal earthquake time histories. The excitation was applied through the soil and into the various structures to produce responses in equipment. An entire range of soil conditions was used with each structure, from soft soil to solid rock. Actual PWR and BWR - Mark I structural models were used as representative of a class of structures. For each model, the stiffness properties were varied, with the same mass, so as to extend the fundamental base structure natural frequency from 2 cps to 36 cps. This resulted in fundamental mode coupled natural frequencies as low as 0.86 cps and as high as 30 cps. From all of these models of soils and structures, floor response spectra were generated at each floor level. The natural frequencies of the structures were varied to obtain maximum response conditions. The actual properties were first used to locate the natural frequencies. The stiffness properties were then varied, with the same mass, to extend the range of the fundamental base structure natural frequency. The intention was to have the coupled structural material frequencies in the vicinity of the peak amplitude frequency content of the excitation spectrum. Particular attention was therefore given to the frequency band between 2 Hz and 4 Hz. A horizontal generic floor response spectra is proposed for the top level of a generic structure. Reduction factors are applied to the peak acceleration for equipment at lower levels

  15. Binary mixtures of condensates in generic confining potentials

    Energy Technology Data Exchange (ETDEWEB)

    Facchi, P [Dipartimento di Matematica and MECENAS, Universita di Bari, I-70125 Bari (Italy); Florio, G; Pascazio, S; Pepe, F V, E-mail: Francesco.Pepe@ba.infn.it [INFN, Sezione di Bari, I-70126 Bari (Italy)

    2011-12-16

    We study a binary mixture of Bose-Einstein condensates, confined in a generic potential, in the Thomas-Fermi approximation. We search for the zero-temperature ground state of the system, both in the case of fixed numbers of particles and fixed chemical potentials. For generic potentials, we analyze the transition from mixed to separated ground-state configurations as the inter-species interaction increases. We derive a simple formula that enables one to determine the location of the domain walls. Finally, we find criteria for the energetic stability of separated configurations, depending on the number and the position of the domain walls separating the two species. (paper)

  16. Binary mixtures of condensates in generic confining potentials

    Science.gov (United States)

    Facchi, P.; Florio, G.; Pascazio, S.; Pepe, F. V.

    2011-12-01

    We study a binary mixture of Bose-Einstein condensates, confined in a generic potential, in the Thomas-Fermi approximation. We search for the zero-temperature ground state of the system, both in the case of fixed numbers of particles and fixed chemical potentials. For generic potentials, we analyze the transition from mixed to separated ground-state configurations as the inter-species interaction increases. We derive a simple formula that enables one to determine the location of the domain walls. Finally, we find criteria for the energetic stability of separated configurations, depending on the number and the position of the domain walls separating the two species.

  17. Binary mixtures of condensates in generic confining potentials

    International Nuclear Information System (INIS)

    Facchi, P; Florio, G; Pascazio, S; Pepe, F V

    2011-01-01

    We study a binary mixture of Bose–Einstein condensates, confined in a generic potential, in the Thomas–Fermi approximation. We search for the zero-temperature ground state of the system, both in the case of fixed numbers of particles and fixed chemical potentials. For generic potentials, we analyze the transition from mixed to separated ground-state configurations as the inter-species interaction increases. We derive a simple formula that enables one to determine the location of the domain walls. Finally, we find criteria for the energetic stability of separated configurations, depending on the number and the position of the domain walls separating the two species. (paper)

  18. Increasing generic engineering competences using coaching and personal feedback

    DEFF Research Database (Denmark)

    Jørgensen, Ivan Harald Holger; Marker-Villumsen, Niels

    2014-01-01

    problem solving methodology. In order to create an environment for the students to practice their generic engineering competences they are throughout the course provided personal feedback by the teacher using a four step feedback model. The course was evaluated using the Course Evaluation Questionnaire...... objective, teaching activities and the assessment are presented and it is demonstrated how coaching and personal feedback – often used in the industry – is used to improve the generic engineering competences of the students in alignment with CDIO. The course is conducted as if it was a project in a company...

  19. HTGR generic technology program. Semiannual report ending March 31, 1980

    International Nuclear Information System (INIS)

    1980-05-01

    This document reports the technical accomplishments on the HTGR Generic Technology Program at General Atomic during the first half of FY-80. It covers a period when the design direction of the National HTGR Program is in the process of an overall review. The HTGR Generic Technology Program activities have continued so as to provide the basic technology required for all HTGR applications. The activities include the need to develop an MEU fuel and the need to qualify materials and components for the higher temperatures of the gas turbine and process heat plants

  20. A Generic Methodology for Superstructure Optimization of Different Processing Networks

    DEFF Research Database (Denmark)

    Bertran, Maria-Ona; Frauzem, Rebecca; Zhang, Lei

    2016-01-01

    In this paper, we propose a generic computer-aided methodology for synthesis of different processing networks using superstructure optimization. The methodology can handle different network optimization problems of various application fields. It integrates databases with a common data architecture......, a generic model to represent the processing steps, and appropriate optimization tools. A special software interface has been created to automate the steps in the methodology workflow, allow the transfer of data between tools and obtain the mathematical representation of the problem as required...

  1. Areal thermal loading recommendations for nuclear waste repositories in salt

    International Nuclear Information System (INIS)

    Russell, J.E.

    1979-06-01

    This document gives a wider understanding of the history of the recommended thermal loadings in salt for both high-level waste (HLW) from fresh UO 2 -fueled, light-water reactors (LWR) with no recycle and spent unreprocessed fuel (SURF) from LWRs. Aspects of the current recommendations that need further study are identified. Finally, an interim set of design thermal-loading recommendations are given that have a common rationale of satisfying performance limits within our current state of knowledge. These recommendations are made on a generic rather than a site-specific basis. 11 figures, 5 tables

  2. Shot loading platform analysis

    International Nuclear Information System (INIS)

    Norman, B.F.

    1994-01-01

    This document provides the wind/seismic analysis and evaluation for the shot loading platform. Hand calculations were used for the analysis. AISC and UBC load factors were used in this evaluation. The results show that the actual loads are under the allowable loads and all requirements are met

  3. Methodological Considerations for Comparison of Brand Versus Generic Versus Authorized Generic Adverse Event Reports in the US Food and Drug Administration Adverse Event Reporting System (FAERS).

    Science.gov (United States)

    Rahman, Md Motiur; Alatawi, Yasser; Cheng, Ning; Qian, Jingjing; Peissig, Peggy L; Berg, Richard L; Page, David C; Hansen, Richard A

    2017-12-01

    The US Food and Drug Administration Adverse Event Reporting System (FAERS), a post-marketing safety database, can be used to differentiate brand versus generic safety signals. To explore the methods for identifying and analyzing brand versus generic adverse event (AE) reports. Public release FAERS data from January 2004 to March 2015 were analyzed using alendronate and carbamazepine as examples. Reports were classified as brand, generic, and authorized generic (AG). Disproportionality analyses compared reporting odds ratios (RORs) of selected known labeled serious adverse events stratifying by brand, generic, and AG. The homogeneity of these RORs was compared using the Breslow-Day test. The AG versus generic was the primary focus since the AG is identical to brand but marketed as a generic, therefore minimizing generic perception bias. Sensitivity analyses explored how methodological approach influenced results. Based on 17,521 US event reports involving alendronate and 3733 US event reports involving carbamazepine (immediate and extended release), no consistently significant differences were observed across RORs for the AGs versus generics. Similar results were obtained when comparing reporting patterns over all time and just after generic entry. The most restrictive approach for classifying AE reports yielded smaller report counts but similar results. Differentiation of FAERS reports as brand versus generic requires careful attention to risk of product misclassification, but the relative stability of findings across varying assumptions supports the utility of these approaches for potential signal detection.

  4. Load and Flexibility Models for Distribution Grid Management

    DEFF Research Database (Denmark)

    Kouzelis, Konstantinos

    to advanced metering and control infrastructure investments. These investments will transform distribution networks into smarter" grids which will facilitate flexible load/generation control in return for financial and reliability benefits to electricity consumers. The theoretical idea of modernising the grid...... involve lack of generic load forecasts, need for flexible load/generation estimation techniques from smart meter measurements, deficiencies in online load distribution observability, and, finally, energy market compatible control algorithms which treat consumer flexibility in a fair manner. These modules...... congestions, is proposed. In the first step, a central controller manages flexibility proactively, whereas in the second step a decentralised control scheme deals with flexibility reactively. Both controllers are designed in such a way, that compatibility with contemporary markets is assured, while special...

  5. Endogenous versus exogenous generic reference pricing for pharmaceuticals.

    Science.gov (United States)

    Antoñanzas, F; Juárez-Castelló, C A; Rodríguez-Ibeas, R

    2017-12-01

    In this paper we carry out a vertical differentiation duopoly model applied to pharmaceutical markets to analyze how endogenous and exogenous generic reference pricing influence competition between generic and branded drugs producers. Unlike the literature, we characterize for the exogenous case the equilibrium prices for all feasible relevant reference prices. Competition is enhanced after the introduction of a reference pricing system. We also compare both reference pricing systems on welfare grounds, assuming two different objective functions for health authorities: (i) standard social welfare and (ii) gross consumer surplus net of total pharmaceutical expenditures. We show that regardless of the objective function, health authorities will never choose endogenous reference pricing. When health authorities are paternalistic, the exogenous reference price that maximizes standard social welfare is such that the price of the generic drug is the reference price while the price of the branded drug is higher than the reference price. When health authorities are not paternalistic, the optimal exogenous reference price is such that the price of the branded drug is the reference price while the price of the generic drug is lower than the reference price.

  6. The generic structures and lexico-grammaticality in English ...

    African Journals Online (AJOL)

    To this end, the generic structures, as well as lexicogrammaticality systems inbuilt in introduction sections of English academic research papers of three different disciplines, linguistics, chemistry and software engineering, were explored. To collect the data, a corpus consisting of 90 papers, 30 for each discipline, published ...

  7. Semantic types of some generic relation arguments: Detection and evaluation

    OpenAIRE

    Katrenko, S.; Adriaans, P.

    2008-01-01

    This paper presents an approach to detection of the semantic types of relation arguments employing the WordNet hierarchy. Using the SemEval-2007 data, we show that the method allows to generalize relation arguments with high precision for such generic relations as Origin-Entity, Content-Container, Instrument-Agency and some other.

  8. Semantic types of some generic relation arguments: Detection and evaluation

    NARCIS (Netherlands)

    Katrenko, S.; Adriaans, P.

    2008-01-01

    This paper presents an approach to detection of the semantic types of relation arguments employing the WordNet hierarchy. Using the SemEval-2007 data, we show that the method allows to generalize relation arguments with high precision for such generic relations as Origin-Entity, Content-Container,

  9. Towards emotion modeling based on gaze dynamics in generic interfaces

    DEFF Research Database (Denmark)

    Vester-Christensen, Martin; Leimberg, Denis; Ersbøll, Bjarne Kjær

    2005-01-01

    Gaze detection can be a useful ingredient in generic human computer interfaces if current technical barriers are overcome. We discuss the feasibility of concurrent posture and eye-tracking in the context of single (low cost) camera imagery. The ingredients in the approach are posture and eye region...

  10. Locality in Generic Instance Search from One Example

    NARCIS (Netherlands)

    Tao, R.; Gavves, E.; Snoek, C.G.M.; Smeulders, A.W.M.

    2014-01-01

    This paper aims for generic instance search from a single example. Where the state-of-the-art relies on global image representation for the search, we proceed by including locality at all steps of the method. As the first novelty, we consider many boxes per database image as candidate targets to

  11. GOoDA: The Generic Optimization Data Analyzer

    CERN Multimedia

    CERN. Geneva

    2012-01-01

    To address this issue, a generic decomposition of how a microprocessor is using the consumed cycles allows code developers to quickly understand which of the myriad of microarchitectural complexities they are battling, without requiring a detailed knowledge of the microarchitecture. When this approach is intrinsically integrated into a performance data analysis tool,...

  12. A generic framework for extracting XML data from legacy databases

    NARCIS (Netherlands)

    Thiran, Ph.; Estiévenart, F.; Hainaut, J.L.; Houben, G.J.P.M.

    2005-01-01

    This paper describes a generic framework of which semantics-based XML data can be derived from legacy databases. It consists in first recovering the conceptual schema of the database through reverse engineering techniques, and then in converting this schema, or part of it, into XML-compliant data

  13. A proposal for generic competence assessment in a serious game

    Directory of Open Access Journals (Sweden)

    María José Bezanilla

    2014-01-01

    Full Text Available This paper focuses on the design of a serious game for the teaching and assessment of generic competences, placing particular emphasis on the competences assessment aspect. Taking into account important aspects of competence assessment such as context, feedback and transparency, among other aspects, and using the University of Deusto's Generic Competences Assessment Model based on the defining of levels, indicators and descriptors as a reference point, a serious game has been designed for the development and evaluation of two Generic Competences: Problem Solving and Entrepreneurship, aimed at final-year undergraduate and first-year postgraduate students. The design process shows that having a Competence Assessment Model based on levels, indicators and descriptors is of great help in defining the game's scenarios and learning and assessment activities. Serious games can also be excellent resources to help in the development and assessment of generic competences, but not as a unique tool, since the concept of competence in itself is highly complex (integrating knowledge, skills, attitudes and values and some elements might require other methods and techniques for its development. It also reveals the difficulties of evaluating competences in general and through serious games in particular.

  14. A model for the generic alpha relaxation in viscous liquids

    DEFF Research Database (Denmark)

    Dyre, Jeppe

    2005-01-01

    Dielectric measurements on molecular liquids just above the glass transition indicate that alpha relaxation is characterized by a generic high-frequency loss varying as one over square root of frequency, whereas deviations from this come from one or more low-lying beta processes [Olsen et al., Phys...

  15. Generic nano-imprint process for fabrication of nanowire arrays

    NARCIS (Netherlands)

    Pierret, A.; Hocevar, M.; Diedenhofen, S.L.; Algra, R.E.; Vlieg, E.; Timmering, E.C.; Verschuuren, M.A.; Immink, W.G.G.; Verheijen, M.A.; Bakkers, E.P.A.M.

    2010-01-01

    A generic process has been developed to grow nearly defect-free arrays of (heterostructured) InP and GaP nanowires. Soft nano-imprint lithography has been used to pattern gold particle arrays on full 2inch substrates. After lift-off organic residues remain on the surface, which induce the growth of

  16. Analogical reasoning for reliability analysis based on generic data

    Energy Technology Data Exchange (ETDEWEB)

    Kozin, Igor O

    1996-10-01

    The paper suggests using the systemic concept 'analogy' for the foundation of an approach to analyze system reliability on the basis of generic data, describing the method of structuring the set that defines analogical models, an approach of transition from the analogical model to a reliability model and a way of obtaining reliability intervals of analogous objects.

  17. Analogical reasoning for reliability analysis based on generic data

    International Nuclear Information System (INIS)

    Kozin, Igor O.

    1996-01-01

    The paper suggests using the systemic concept 'analogy' for the foundation of an approach to analyze system reliability on the basis of generic data, describing the method of structuring the set that defines analogical models, an approach of transition from the analogical model to a reliability model and a way of obtaining reliability intervals of analogous objects

  18. Generic versus discipline-specific writing interventions: Report on a ...

    African Journals Online (AJOL)

    Departing from a socio-constructivist perspective, the main purpose of the research on which this article reports was to indicate the effectiveness of both discipline-specific and generic approaches in teaching academic writing to undergraduate university students. A quasi-experimental design was followed, comparing the ...

  19. Lawsuits allege price fixing by generic drug makers

    Directory of Open Access Journals (Sweden)

    Robbins RA

    2016-12-01

    Full Text Available No abstract available. Article truncated at 150 words. Two years after high generic drug prices became a public controversy, Reuters is reporting that 20 states filed a lawsuit Thursday against Mylan, Teva Pharmaceuticals and four other generic drug makers (1. The suit alleges the companies conspired to fix prices or allocated markets to prop up prices. The civil lawsuit, led by antitrust investigators in Connecticut, comes one day after the U.S. Department of Justice filed criminal charges against two former executives of the generic drug maker, Heritage. The states attorneys general asked the court to order the companies to disgorge ill-gotten gains, which were not defined, pay attorneys' fees and stop collusion. Of the states in the Southwest only Nevada is participating in the lawsuit. The cases are part of a broader generic drug pricing probe that remains under way at the state and federal level, as well as in the U.S. Congress. In 2014, media reports of …

  20. 40 CFR 721.5762 - Aromatic aldehyde phenolic resin (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Aromatic aldehyde phenolic resin... Specific Chemical Substances § 721.5762 Aromatic aldehyde phenolic resin (generic). (a) Chemical substance... aromatic aldehyde phenolic resin (PMN P-01-573) is subject to reporting under this section for the...

  1. Defining Generic Architecture for Cloud Infrastructure as a Service model

    NARCIS (Netherlands)

    Demchenko, Y.; de Laat, C.

    2011-01-01

    Infrastructure as a Service (IaaS) is one of the provisioning models for Clouds as defined in the NIST Clouds definition. Although widely used, current IaaS implementations and solutions doesn’t have common and well defined architecture model. The paper attempts to define a generic architecture for

  2. A generic scale for assessment of attitudes towards social robots

    DEFF Research Database (Denmark)

    Damholdt, Malene Flensborg; Olesen, Martin Hammershøj; Nørskov, Marco

    2016-01-01

    The research field into social robotics is expanding and with it the need for consistent methods for assessing attitudinal stance towards social robots. In this paper we describe the development and planned validation of the Attitudes towards social robots scale (ASOR-5): a generic questionnaire ...

  3. Defining generic architecture for Cloud IaaS provisioning model

    NARCIS (Netherlands)

    Demchenko, Y.; de Laat, C.; Mavrin, A.; Leymann, F.; Ivanov, I.; van Sinderen, M.; Shishkov, B.

    2011-01-01

    Infrastructure as a Service (IaaS) is one of the provisioning models for Clouds as defined in the NIST Clouds definition. Although widely used, current IaaS implementations and solutions doesn’t have common and well defined architecture model. The paper attempts to define a generic architecture for

  4. Moving up and down in the generic multiverse

    NARCIS (Netherlands)

    Hamkins, J.D.; Löwe, B.; Lodaya, K.

    2013-01-01

    We investigate the modal logic of the generic multiverse which is a bimodal logic with operators corresponding to the relations “is a forcing extension of” and “is a ground model of”. The fragment of the first relation is the modal logic of forcing and was studied by the authors in earlier work. The

  5. Generic adaptation framework for unifying adaptive web-based systems

    NARCIS (Netherlands)

    Knutov, E.

    2012-01-01

    The Generic Adaptation Framework (GAF) research project first and foremost creates a common formal framework for describing current and future adaptive hypermedia (AHS) and adaptive webbased systems in general. It provides a commonly agreed upon taxonomy and a reference model that encompasses the

  6. Generic skills requirements (KSA model) towards future mechanical ...

    African Journals Online (AJOL)

    ... Statistics and Discriminant Analysis (DA) as required to achieve the objective of the study. This study will guide all future engineers, especially in the field of Mechanical Engineering in Malaysia to penetrate the job market according to the current market needs. Keywords: generic skills; KSA model; mechanical engineers; ...

  7. 40 CFR 721.3710 - Polyether modified fatty acids (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Polyether modified fatty acids... Specific Chemical Substances § 721.3710 Polyether modified fatty acids (generic). (a) Chemical substance... Polyether modified fatty acids (PMN P-99-0435) is subject to reporting under this section for the...

  8. Effect of generic issues program on improving safety

    International Nuclear Information System (INIS)

    Fard, M. R.; Kauffman, J. V.

    2010-01-01

    The U.S. Nuclear Regulatory Commission (NRC) identifies (by its assessment of plant operation) certain issues involving public health and safety, the common defense and security, or the environment that could affect multiple entities under NRC jurisdiction. The Generic Issues Program (GIP) addresses the resolution of these Generic Issues (GIs). The resolution of these issues may involve new or revised rules, new or revised guidance, or revised interpretation of rules or guidance that affect nuclear power plant licensees, nuclear material certificate holders, or holders of other regulatory approvals. U.S. NRC provides information related to the past and ongoing GIP activities to the general public by the use of three main resources, namely NUREG-0933, 'Resolution of Generic Safety Issues, ' Generic Issues Management Control System (GIMCS), and GIP public web page. GIP information resources provide information such as historical information on resolved GIs, current status of the open GIs, policy documents, program procedures, GIP annual and quarterly reports and the process to contact GIP and propose a GI This paper provides an overview of the GIP and several examples of safety improvements resulting from the resolution of GIs. In addition, the paper provides a brief discussion of a few recent GIs to illustrate how the program functions to improve safety. (authors)

  9. A generic service interfacing approach for home networking

    NARCIS (Netherlands)

    Chen, S.; Lukkien, J.J.; Bosman, R.P.; Verhoeven, R.

    2010-01-01

    This paper presents a generic service interfacing approach which enables the interoperability of networked devices and the reusability of services. Services are specified through a set of interfaces which are language and deployment platform independent. External service orchestration is applied to

  10. Toward a generic model of trust for electronic commerce

    NARCIS (Netherlands)

    Tan, YH; Thoen, W

    2000-01-01

    The authors present a generic model of trust for electronic commerce consisting of two basic components, party trust and control trust, based on the concept that trust in a transaction with another party combines trust in the other parry and trust in the control mechanisms that ensure the successful

  11. Maximum potential cost-savings attributable to generic substitution ...

    African Journals Online (AJOL)

    D. Husselmann

    community. ... Conclusions: Potential economic benefits can be generated with generic substitution. ... Available online at www.sciencedirect.com ... supply of safe, cost-effective drugs of acceptable quality to all citizens of South Africa, and the rational use of drugs by .... different types of schizophrenic diagnosis) with a claim.

  12. The Generic Integrity of Newspaper Editorials: A Systemic Functional Perspective

    Science.gov (United States)

    Ansary, Hasan; Babaii, Esmat

    2005-01-01

    One fruitful line of research has been to explore the local linguistic as well as global rhetorical patterns of particular genres in order to identify their recognizable structural identity, or what Bhatia (1999: 22) calls "generic integrity". In terms of methodology, to date most genre-based studies have employed one or the other of Swales'…

  13. Cosmological N-body simulations with generic hot dark matter

    DEFF Research Database (Denmark)

    Brandbyge, Jacob; Hannestad, Steen

    2017-01-01

    We have calculated the non-linear effects of generic fermionic and bosonic hot dark matter components in cosmological N-body simulations. For sub-eV masses, the non-linear power spectrum suppression caused by thermal free-streaming resembles the one seen for massive neutrinos, whereas for masses...

  14. Generic Software Architecture for Prognostics (GSAP) User Guide

    Science.gov (United States)

    Teubert, Christopher Allen; Daigle, Matthew John; Watkins, Jason; Sankararaman, Shankar; Goebel, Kai

    2016-01-01

    The Generic Software Architecture for Prognostics (GSAP) is a framework for applying prognostics. It makes applying prognostics easier by implementing many of the common elements across prognostic applications. The standard interface enables reuse of prognostic algorithms and models across systems using the GSAP framework.

  15. GENERIC VERIFICATION PROTOCOL FOR AQUEOUS CLEANER RECYCLING TECHNOLOGIES

    Science.gov (United States)

    This generic verification protocol has been structured based on a format developed for ETV-MF projects. This document describes the intended approach and explain plans for testing with respect to areas such as test methodology, procedures, parameters, and instrumentation. Also ...

  16. Potential Cost Savings from Generic Medicines - Protecting the ...

    African Journals Online (AJOL)

    ... a pro-generic policy since the introduction of the National Drug Policy in 1996. ... Medicines provided outside of hospitals accounted for 17% of medical aid ... in the chronic disease algorithms set out by the Council for Medical Schemes ...

  17. 40 CFR 721.10048 - Substituted anthraquinone (generic).

    Science.gov (United States)

    2010-07-01

    ..., and consumer activities. Requirements as specified in § 721.80(s) (4,500 kilograms). (ii) [Reserved... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Substituted anthraquinone (generic). 721.10048 Section 721.10048 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED...

  18. 40 CFR 721.10006 - Mixed metal oxide (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Mixed metal oxide (generic). 721.10006 Section 721.10006 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES...) of this section. (2) The significant new uses are: (i) Industrial, commercial, and consumer...

  19. 40 CFR 721.10087 - Substituted alkyl phosphine oxide (generic).

    Science.gov (United States)

    2010-07-01

    ... are: (i) Industrial, commercial, and consumer activities. Requirements as specified in § 721.80(s... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Substituted alkyl phosphine oxide (generic). 721.10087 Section 721.10087 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED...

  20. 40 CFR 721.10163 - Chloro fluoro alkane (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Chloro fluoro alkane (generic). 721.10163 Section 721.10163 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC...)(2) of this section. (2) The significant new uses are: (i) Industrial, commercial, and consumer...

  1. 40 CFR 721.10003 - Manganese heterocyclic tetraamine complex (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Manganese heterocyclic tetraamine complex (generic). 721.10003 Section 721.10003 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... section. (2) The significant new uses are: (i) Industrial, commercial, and consumer activities...

  2. 40 CFR 721.9079 - Dihydro quinacridone derivative (generic).

    Science.gov (United States)

    2010-07-01

    ...) Industrial, commercial, and consumer activities. Requirements as specified in § 721.80(s) (1,000 kg). (ii... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Dihydro quinacridone derivative (generic). 721.9079 Section 721.9079 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED...

  3. 40 CFR 721.10132 - Phosphoramidic acid, carbomonocyclic-, diphenylester (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Phosphoramidic acid, carbomonocyclic-, diphenylester (generic). 721.10132 Section 721.10132 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... significant new uses are: (i) Industrial, commercial, and consumer activities. Requirements as specified in...

  4. 40 CFR 721.10043 - Dineopentyl-4-substituted phthalate (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Dineopentyl-4-substituted phthalate... Specific Chemical Substances § 721.10043 Dineopentyl-4-substituted phthalate (generic). (a) Chemical... as dineopentyl-4-substituted phthalate (PMN P-02-697) is subject to reporting under this section for...

  5. 40 CFR 721.9513 - Modified magnesium silicate polymer (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Modified magnesium silicate polymer... Specific Chemical Substances § 721.9513 Modified magnesium silicate polymer (generic). (a) Chemical... as modified magnesium silicate polymer (PMN P-98-604) is subject to reporting under this section for...

  6. Generic Formal Framework for Compositional Analysis of Hierarchical Scheduling Systems

    DEFF Research Database (Denmark)

    Boudjadar, Jalil; Hyun Kim, Jin; Thi Xuan Phan, Linh

    We present a compositional framework for the specification and analysis of hierarchical scheduling systems (HSS). Firstly we provide a generic formal model, which can be used to describe any type of scheduling system. The concept of Job automata is introduced in order to model job instantiation...

  7. 40 CFR 721.1878 - Alkali metal alkyl borohydride (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Alkali metal alkyl borohydride... Specific Chemical Substances § 721.1878 Alkali metal alkyl borohydride (generic). (a) Chemical substance... alkali metal alkyl borohydride (PMN P-00-1089) is subject to reporting under this section for the...

  8. Final design of the generic upper port plug structure for ITER diagnostic systems

    Energy Technology Data Exchange (ETDEWEB)

    Pak, Sunil, E-mail: paksunil@nfri.re.kr [National Fusion Research Institute, Daejeon (Korea, Republic of); Feder, Russell [Princeton Plasma Physics Laboratory, Princeton, NJ (United States); Giacomin, Thibaud; Guirao, Julio; Iglesias, Silvia; Josseaume, Fabien [ITER Organization, Route de Vinon sur Verdon, 13115 St Paul-lez-Durance (France); Kalish, Michael; Loesser, Douglas [Princeton Plasma Physics Laboratory, Princeton, NJ (United States); Maquet, Philippe [ITER Organization, Route de Vinon sur Verdon, 13115 St Paul-lez-Durance (France); Ordieres, Javier; Panizo, Marcos [NATEC, Ingenieros, Gijón (Spain); Pitcher, Spencer; Portalès, Mickael [ITER Organization, Route de Vinon sur Verdon, 13115 St Paul-lez-Durance (France); Proust, Maxime [CEA, Cadarache, St. Paul-lez-Durance (France); Ronden, Dennis [FOM Institute DIFFER, Nieuwegein (Netherlands); Serikov, Arkady [Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen (Germany); Suarez, Alejandro [ITER Organization, Route de Vinon sur Verdon, 13115 St Paul-lez-Durance (France); Tanchuk, Victor [NIIEFA, St.-Petersburg (Russian Federation); Udintsev, Victor; Vacas, Christian [ITER Organization, Route de Vinon sur Verdon, 13115 St Paul-lez-Durance (France); and others

    2016-01-15

    The generic upper port plug (GUPP) structure in ITER is a 6 m long metal box which deploys diagnostic components into the vacuum vessel. This structure is commonly used for all the diagnostic upper ports. The final design of the GUPP structure, which has successfully passed the final design review in 2013, is described here. The diagnostic port plug is cantilevered to the vacuum vessel with a heavy payload at the front, so called the diagnostic first wall (DFW) and the diagnostic shield module (DSM). Most of electromagnetic (EM) load (∼80%) occurs in DFW/DSM. Therefore, the mounting design to transfer the EM load from DFW/DSM to the GUPP structure is challenging, which should also comply with thermal expansion and tolerance for assembly and manufacturing. Another key design parameter to be considered is the gap between the port plug and the vacuum vessel port. The gap should be large enough to accommodate the remote handling of the heavy port plug (max. 25 t), the structural deflection due to external loads and machine assembly tolerance. At the same time, the gap should be minimized to stop the neutron streaming according to the ALARA (as low as reasonably achievable) principle. With these design constraints, the GUPP structure should also provide space for diagnostic integration as much as possible. This requirement has led to the single wall structure having the gun-drilled water channels inside the structure. Furthermore, intensive efforts have been made on the manufacturing study including material selection, manufacturing codes and French regulation related to nuclear equipment and safety. All these main design and manufacturing aspects are discussed in this paper, including requirements, interfaces, loads and structural assessment and maintenance.

  9. Biopharmaceutic Risk Assessment of Brand and Generic Lamotrigine Tablets.

    Science.gov (United States)

    Vaithianathan, Soundarya; Raman, Siddarth; Jiang, Wenlei; Ting, Tricia Y; Kane, Maureen A; Polli, James E

    2015-07-06

    The therapeutic equivalence of generic and brand name antiepileptic drugs has been questioned by neurologists and the epilepsy community. A potential contributor to such concerns is pharmaceutical quality. The objective was to assess the biopharmaceutic risk of brand name Lamictal 100 mg tablets and generic lamotrigine 100 mg tablets from several manufacturers. Lamotrigine was characterized in terms of the Biopharmaceutics Classification System (BCS), including aqueous solubility and Caco-2 permeability. A panel of pharmaceutical quality tests was also performed on three batches of Lamictal, three batches of Teva generic, and one batch of each of four other generics: appearance, identity, assay, impurity, uniformity of dosage units, disintegration, dissolution, friability, and loss on drying. These market surveillance results indicate that all brand name and generic lamotrigine 100 mg tablets passed all tests and showed acceptable pharmaceutical quality and low biopharmaceutic risk. Lamotrigine was classified as a BCS class IIb drug, exhibiting pH-dependent aqueous solubility and dissolution. At pH 1.2 and 4.5, lamotrigine exhibited high solubility, whereas lamotrigine exhibited low solubility at pH 6.8, including non-sink dissolution. Lamotrigine showed high Caco-2 permeability. The apparent permeability (Papp) of lamotrigine was (73.7 ± 8.7) × 10(-6) cm/s in the apical-to-basolateral (AP-BL) direction and (41.4 ± 1.6) × 10(-6) cm/s in the BL-AP direction, which were higher than metoprolol's AP-BL Papp of (21.2 ± 0.9) × 10(-6) cm/s and BL-AP Papp of (34.6 ± 4.6) × 10(-6) cm/s. Overall, lamotrigine's favorable biopharmaceutics from a drug substance perspective and favorable quality characteristics from a tablet formulation perspective suggest that multisource lamotrigine tablets exhibit a low biopharmaceutic risk.

  10. Loads and loads and loads: the influence of prospective load, retrospective load, and ongoing task load in prospective memory

    Science.gov (United States)

    Meier, Beat; Zimmermann, Thomas D.

    2015-01-01

    In prospective memory tasks different kinds of load can occur. Adding a prospective memory task can impose a load on ongoing task performance. Adding ongoing task load (OTL) can affect prospective memory performance. The existence of multiple target events increases prospective load (PL) and adding complexity to the to-be-remembered action increases retrospective load (RL). In two experiments, we systematically examined the effects of these different types of load on prospective memory performance. Results showed an effect of PL on costs in the ongoing task for categorical targets (Experiment 2), but not for specific targets (Experiment 1). RL and OTL both affected remembering the retrospective component of the prospective memory task. We suggest that PL can enhance costs in the ongoing task due to additional monitoring requirements. RL and OTL seem to impact the division of resources between the ongoing task and retrieval of the retrospective component, which may affect disengagement from the ongoing task. In general, the results demonstrate that the different types of load affect prospective memory differentially. PMID:26082709

  11. Loads and loads and loads: the influence of prospective load, retrospective load, and ongoing task load in prospective memory.

    Science.gov (United States)

    Meier, Beat; Zimmermann, Thomas D

    2015-01-01

    In prospective memory tasks different kinds of load can occur. Adding a prospective memory task can impose a load on ongoing task performance. Adding ongoing task load (OTL) can affect prospective memory performance. The existence of multiple target events increases prospective load (PL) and adding complexity to the to-be-remembered action increases retrospective load (RL). In two experiments, we systematically examined the effects of these different types of load on prospective memory performance. Results showed an effect of PL on costs in the ongoing task for categorical targets (Experiment 2), but not for specific targets (Experiment 1). RL and OTL both affected remembering the retrospective component of the prospective memory task. We suggest that PL can enhance costs in the ongoing task due to additional monitoring requirements. RL and OTL seem to impact the division of resources between the ongoing task and retrieval of the retrospective component, which may affect disengagement from the ongoing task. In general, the results demonstrate that the different types of load affect prospective memory differentially.

  12. Generic repository design concepts and thermal analysis (FY11)

    International Nuclear Information System (INIS)

    Howard, Robert; Dupont, Mark; Blink, James A.; Fratoni, Massimiliano; Greenberg, Harris; Carter, Joe; Hardin, Ernest L.; Sutton, Mark A.

    2011-01-01

    Reference concepts for geologic disposal of used nuclear fuel and high-level radioactive waste in the U.S. are developed, including geologic settings and engineered barriers. Repository thermal analysis is demonstrated for a range of waste types from projected future, advanced nuclear fuel cycles. The results show significant differences among geologic media considered (clay/shale, crystalline rock, salt), and also that waste package size and waste loading must be limited to meet targeted maximum temperature values. In this study, the UFD R and D Campaign has developed a set of reference geologic disposal concepts for a range of waste types that could potentially be generated in advanced nuclear FCs. A disposal concept consists of three components: waste inventory, geologic setting, and concept of operations. Mature repository concepts have been developed in other countries for disposal of spent LWR fuel and HLW from reprocessing UNF, and these serve as starting points for developing this set. Additional design details and EBS concepts will be considered as the reference disposal concepts evolve. The waste inventory considered in this study includes: (1) direct disposal of SNF from the LWR fleet, including Gen III+ advanced LWRs being developed through the Nuclear Power 2010 Program, operating in a once-through cycle; (2) waste generated from reprocessing of LWR UOX UNF to recover U and Pu, and subsequent direct disposal of used Pu-MOX fuel (also used in LWRs) in a modified-open cycle; and (3) waste generated by continuous recycling of metal fuel from fast reactors operating in a TRU burner configuration, with additional TRU material input supplied from reprocessing of LWR UOX fuel. The geologic setting provides the natural barriers, and establishes the boundary conditions for performance of engineered barriers. The composition and physical properties of the host medium dictate design and construction approaches, and determine hydrologic and thermal responses of

  13. Generic repository design concepts and thermal analysis (FY11).

    Energy Technology Data Exchange (ETDEWEB)

    Howard, Robert (Oak Ridge National Laboratory, Oak Ridge, TN); Dupont, Mark (Savannah River Nuclear Solutions, Aiken, SC); Blink, James A. (Lawrence Livermore National Laboratory, Livermore, CA); Fratoni, Massimiliano (Lawrence Livermore National Laboratory, Livermore, CA); Greenberg, Harris (Lawrence Livermore National Laboratory, Livermore, CA); Carter, Joe (Savannah River Nuclear Solutions, Aiken, SC); Hardin, Ernest L.; Sutton, Mark A. (Lawrence Livermore National Laboratory, Livermore, CA)

    2011-08-01

    Reference concepts for geologic disposal of used nuclear fuel and high-level radioactive waste in the U.S. are developed, including geologic settings and engineered barriers. Repository thermal analysis is demonstrated for a range of waste types from projected future, advanced nuclear fuel cycles. The results show significant differences among geologic media considered (clay/shale, crystalline rock, salt), and also that waste package size and waste loading must be limited to meet targeted maximum temperature values. In this study, the UFD R&D Campaign has developed a set of reference geologic disposal concepts for a range of waste types that could potentially be generated in advanced nuclear FCs. A disposal concept consists of three components: waste inventory, geologic setting, and concept of operations. Mature repository concepts have been developed in other countries for disposal of spent LWR fuel and HLW from reprocessing UNF, and these serve as starting points for developing this set. Additional design details and EBS concepts will be considered as the reference disposal concepts evolve. The waste inventory considered in this study includes: (1) direct disposal of SNF from the LWR fleet, including Gen III+ advanced LWRs being developed through the Nuclear Power 2010 Program, operating in a once-through cycle; (2) waste generated from reprocessing of LWR UOX UNF to recover U and Pu, and subsequent direct disposal of used Pu-MOX fuel (also used in LWRs) in a modified-open cycle; and (3) waste generated by continuous recycling of metal fuel from fast reactors operating in a TRU burner configuration, with additional TRU material input supplied from reprocessing of LWR UOX fuel. The geologic setting provides the natural barriers, and establishes the boundary conditions for performance of engineered barriers. The composition and physical properties of the host medium dictate design and construction approaches, and determine hydrologic and thermal responses of the

  14. Analysis of the Italian generic medicines retail market: recommendations to enhance long-term sustainability.

    Science.gov (United States)

    Dylst, Pieter; Vulto, Arnold; Simoens, Steven

    2015-02-01

    Italy is among the European countries with the lowest uptake of generic medicines. This paper provides a perspective on the Italian generic medicines retail market. Fast market entrance of generic medicines in Italy is hindered by several factors: the existence of Complementary Protection Certificates in the past, the large market for copies and multiple cases of patent linkage. Prices of generic medicines in Italy are low compared to other European countries. To contain pharmaceutical expenditure, pharmaceutical companies are currently forced to pay back in case of overspending, which disproportionally penalizes small and fast growing companies, to which most generic companies belong to. Current demand-side policies do not successfully stimulate the use of generic medicines. The current market environment surrounding the Italian generic medicines retail market (i.e., low prices, low volumes) threatens its long-term sustainability. Recommendations to enhance the long-term sustainability of the Italian generic medicines retail market round off this perspective paper.

  15. A Generic Friction Model for Radial Slider Bearing Simulation Considering Elastic and Plastic Deformation

    Directory of Open Access Journals (Sweden)

    Günter Offner

    2015-06-01

    Full Text Available The investigation of component dynamics is one of the main tasks of internal combustion engine (ICE simulation. This prediction is important in order to understand complex loading conditions, which happen in a running ICE. Due to the need for fuel saving, mechanical friction, in particular in radial slider bearings, is one important investigation target. A generic friction modeling approach for radial slider bearings, which can be applied to lubricated contact regimes, will be presented in this paper. Besides viscous friction, the approach considers in particular boundary friction. The parameterization of the friction model is done using surface material and surface roughness measurement data. Furthermore, fluid properties depending on the applied oil additives are being considered. The application of the model will be demonstrated for a typical engineering task of a connecting rod big end study to outline the effects of contact surface texture. AlSn-based and polymer coated bearing shells will be analyzed and compared with respect to friction reduction effects, running-in behavior and thermal load capabilities.

  16. Wind Loads on Structures

    DEFF Research Database (Denmark)

    Dyrbye, Claes; Hansen, Svend Ole

    Wind loads have to be taken into account when designing civil engineering structures. The wind load on structures can be systematised by means of the wind load chain: wind climate (global), terrain (wind at low height), aerodynamic response (wind load to pressure), mechanical response (wind...... pressure to structural response) and design criteria. Starting with an introduction of the wind load chain, the book moves on to meteorological considerations, atmospheric boundary layer, static wind load, dynamic wind load and scaling laws used in wind-tunnel tests. The dynamic wind load covers vibrations...... induced by wind turbulence, vortex shedding, flutter and galloping. The book gives a comprehensive treatment of wind effects on structures and it will be useful for consulting engineers designing wind-sensitive structures. It will also be valuable for students of civil engineering as textbook...

  17. Carbohydrate-Loading Diet

    Science.gov (United States)

    ... Grape juice (12 ounces) 55 225 Lunch Milk, chocolate, reduced fat (12 ounces) 45 285 4 slices ... usual during carbohydrate loading to get the same benefits as a man does. Despite carbohydrate loading, you ...

  18. Autonomous Propellant Loading Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The AES Autonomous Propellant Loading (APL) project consists of three activities. The first is to develop software that will automatically control loading of...

  19. Fuel pellet loading apparatus

    International Nuclear Information System (INIS)

    1980-01-01

    Apparatus is described for loading a predetermined amount of nuclear fuel pellets into nuclear fuel elements and particularly for the automatic loading of fuel pellets from within a sealed compartment. (author)

  20. Limit loads in nozzles

    International Nuclear Information System (INIS)

    Zouain, N.

    1983-01-01

    The static method for the evaluation of the limit loads of a perfectly elasto-plastic structure is presented. Using the static theorem of Limit Analysis and the Finite Element Method, a lower bound for the colapso load can be obtained through a linear programming problem. This formulation if then applied to symmetrically loaded shells of revolution and some numerical results of limit loads in nozzles are also presented. (Author) [pt

  1. 76 FR 21800 - Agency Information Collection Activities: Submission for OMB Review; Comment Request; Generic...

    Science.gov (United States)

    2011-04-18

    ... precision requirements or power calculations that justify the proposed sample size, the expected response... Activities: Submission for OMB Review; Comment Request; Generic Clearance for the Collection of Qualitative... Request (Generic ICR): ``Generic Clearance for the Collection of Qualitative Feedback on Agency Service...

  2. 76 FR 24920 - Agency Information Collection Activities: Proposed Collection; Comment Request; Generic Clearance...

    Science.gov (United States)

    2011-05-03

    ... precision requirements or power calculations that justify the proposed sample size, the expected response... Collection; Comment Request; Generic Clearance for the Collection of Qualitative Feedback on Agency Service... Information Collection Request (Generic ICR): ``Generic Clearance for the Collection of Qualitative Feedback...

  3. 77 FR 17493 - Agency Information Collection Activities: Proposed Collection; Comment Request; DOI Generic...

    Science.gov (United States)

    2012-03-26

    ... justify the proposed sample size, the expected response rate, methods for assessing potential non...: Proposed Collection; Comment Request; DOI Generic Clearance for the Collection of Qualitative Feedback on... (Generic ICR): ``DOI Generic Clearance for the Collection of Qualitative Feedback on Agency Service...

  4. 76 FR 35069 - Agency Information Collection Activities; Proposed Collection; Comment Request; Generic Clearance...

    Science.gov (United States)

    2011-06-15

    ... precision requirements or power calculations that justify the proposed sample size, the expected response...; Proposed Collection; Comment Request; Generic Clearance for the Collection of Qualitative Feedback on... (Generic ICR): ``Generic Clearance for the Collection of Qualitative Feedback on Agency Service Delivery...

  5. 75 FR 80542 - Agency Information Collection Activities: Proposed Collection; Comment Request; Generic Clearance...

    Science.gov (United States)

    2010-12-22

    ... calculations that justify the proposed sample size, the expected response rate, methods for assessing potential...; Comment Request; Generic Clearance for the Collection of Qualitative Feedback on Agency Service Delivery... Collection Request (Generic ICR): ``Generic Clearance for the Collection of Qualitative Feedback on Agency...

  6. 77 FR 52708 - Agency Information Collection Activities: Proposed Collection; Comment Request; Generic Clearance...

    Science.gov (United States)

    2012-08-30

    ... calculations that justify the proposed sample size, the expected response rate, methods for assessing potential...: Proposed Collection; Comment Request; Generic Clearance for the Collection of Qualitative Feedback on... Information Collection request (Generic ICR): ``Generic Clearance for the Collection of Qualitative Feedback...

  7. 76 FR 12140 - Agency Information Collection Activities: Proposed Collection; Comment Request; Generic Clearance...

    Science.gov (United States)

    2011-03-04

    ... calculations that justify the proposed sample size, the expected response rate, methods for assessing potential...; Comment Request; Generic Clearance for the Collection of Qualitative Feedback on Agency Service Delivery... Information Collection Request (Generic ICR): ``Generic Clearance for the Collection of Qualitative Feedback...

  8. 76 FR 19826 - Agency Information Collection Activities: Proposed Collection; Comment Request; Generic Clearance...

    Science.gov (United States)

    2011-04-08

    ... calculations that justify the proposed sample size, the expected response rate, methods for assessing potential... Request; Generic Clearance for the Collection of Qualitative Feedback on Agency Service Delivery AGENCY... (Generic ICR): ``Generic Clearance for the Collection of Qualitative Feedback on Agency Service Delivery...

  9. 76 FR 17861 - Agency Information Collection Activities: Proposed Collection; Comment Request; Generic Clearance...

    Science.gov (United States)

    2011-03-31

    ... requirements or power calculations that justify the proposed sample size, the expected response rate, methods...; Comment Request; Generic Clearance for the Collection of Qualitative Feedback on Agency Service Delivery... Information Collection Request (Generic ICR): ``Generic Clearance for the Collection of Qualitative Feedback...

  10. 76 FR 25693 - Agency Information Collection Activities: Proposed Collection; Comment Request; Generic Clearance...

    Science.gov (United States)

    2011-05-05

    ... requirements or power calculations that justify the proposed sample size, the expected response rate, methods... Collection; Comment Request; Generic Clearance for the Collection of Qualitative Feedback on Agency Service... Collection Request (Generic ICR): ``Generic Clearance for the Collection of Qualitative Feedback on Agency...

  11. 77 FR 45629 - Animal Generic Drug User Fee Rates and Payment Procedures for Fiscal Year 2013

    Science.gov (United States)

    2012-08-01

    ..., beginning with the letters ``AG'', from the upper right-hand corner of your completed Animal Generic Drug...] Animal Generic Drug User Fee Rates and Payment Procedures for Fiscal Year 2013 AGENCY: Food and Drug... payment procedures for fiscal year (FY) 2013 generic new animal drug user fees. The Federal Food, Drug...

  12. A Domain-Specific Language for Generic Interlocking Models and Their Properties

    DEFF Research Database (Denmark)

    Vu, Linh Hong; Haxthausen, Anne Elisabeth; Peleska, Jan

    2017-01-01

    of this work is to provide a domain-specific language for generic models and an instantiator tool taking not only configuration data but also a generic model as input instead of using a hard-coded generator for instantiating only one fixed generic model and its properties with configuration data....

  13. 40 CFR 721.10017 - Amine terminated bisphenol A diglycidyl ether polymer (generic).

    Science.gov (United States)

    2010-07-01

    ... diglycidyl ether polymer (generic). 721.10017 Section 721.10017 Protection of Environment ENVIRONMENTAL... ether polymer (generic). (a) Chemical substances and significant new uses subject to reporting. (1) The chemical substances identified generically as amine terminated bisphenol A diglycidyl ether polymer (PMNs P...

  14. Frequency and Informativeness of Gestural Cues Accompanying Generic and Particular Reference

    Science.gov (United States)

    Meyer, Meredith; Gelman, Susan A.; Stilwell, Sarah M.

    2015-01-01

    Generic noun phrases, or generics, refer to abstract categories ("Dogs" bark) rather than particular individuals ("Those dogs" bark). Study 1 investigated how parents use gestures in association with generic versus particular reference during naturalistic interactions with their 2- and 3-year-old children. Parents provided…

  15. Pointing As a Socio-Pragmatic Cue to Particular vs.Generic Reference

    Science.gov (United States)

    Meyer, Meredith; Baldwin, Dare A.

    2013-01-01

    Generic noun phrases, or generics, refer to abstract kind categories ("Dogs" bark) rather than particular individuals ("Those dogs" bark). How do children distinguish these distinct kinds of reference? We examined the role of one socio-pragmatic cue, namely pointing, in producing and comprehending generic versus particular…

  16. Generic strategies: an evolutionary and comparative study of three views

    Directory of Open Access Journals (Sweden)

    Sidney Chaves

    2010-04-01

    Full Text Available This study analyses visions of three of the most renowned authors regarding generic strategies, making a comparison among those visions along the time. To perform such comparison, two distinct works of each author were selected and then it is pointed out how changes showed up from one moment to another. The selected authors are Ansoff, Miles et al. and Porter, all responsible for three of the most spread typologies for generic strategies. From a chronological point of view, these typologies have been originally proposed between 1965 and 1980 and revisited between 1985 and 1988. Despite time passed from then until today, these typologies are still fully adequate and completely applicable to organizations' present reality. Contributions of this study reside on detailed presentation of each typology's major characteristics, due to detailed and judicious bibliography revision.

  17. Generic safety insights for inspection of boiling water reactors

    International Nuclear Information System (INIS)

    Higgins, J.C.; Taylor, J.H.; Fresco, A.N.; Hillman, B.M.

    1987-01-01

    As the number of operating nuclear power plants (NPP) increases, safety inspection has increased in importance. However, precisely what is important, and what is not important? What should one focus inspection efforts on. Over the last two years Probabilistic Risk Assessment (PR) techniques have been developed to aid in the inspection process. Broad interest in generic PRA-based methods has arisen in the past year, since only about 25% of the US nuclear power plants have completed PRAs, and also, inspectors want PRA-based tools for these plants. This paper describes the BNL program to develop generic BWR PRA-based inspection insights or inspection guidance designed to be applied to plants without PRAs

  18. Generic nano-imprint process for fabrication of nanowire arrays

    Energy Technology Data Exchange (ETDEWEB)

    Pierret, Aurelie; Hocevar, Moira; Algra, Rienk E; Timmering, Eugene C; Verschuuren, Marc A; Immink, George W G; Verheijen, Marcel A; Bakkers, Erik P A M [Philips Research Laboratories Eindhoven, High Tech Campus 11, 5656 AE Eindhoven (Netherlands); Diedenhofen, Silke L [FOM Institute for Atomic and Molecular Physics c/o Philips Research Laboratories, High Tech Campus 4, 5656 AE Eindhoven (Netherlands); Vlieg, E, E-mail: e.p.a.m.bakkers@tue.nl [IMM, Solid State Chemistry, Radboud University Nijmegen, Heyendaalseweg 135, 6525 AJ Nijmegen (Netherlands)

    2010-02-10

    A generic process has been developed to grow nearly defect-free arrays of (heterostructured) InP and GaP nanowires. Soft nano-imprint lithography has been used to pattern gold particle arrays on full 2 inch substrates. After lift-off organic residues remain on the surface, which induce the growth of additional undesired nanowires. We show that cleaning of the samples before growth with piranha solution in combination with a thermal anneal at 550 deg. C for InP and 700 deg. C for GaP results in uniform nanowire arrays with 1% variation in nanowire length, and without undesired extra nanowires. Our chemical cleaning procedure is applicable to other lithographic techniques such as e-beam lithography, and therefore represents a generic process.

  19. Generic procedures for assessment and response during a radiological emergency

    International Nuclear Information System (INIS)

    2000-08-01

    One of the most important aspects of managing a radiological emergency is the ability to promptly and adequately determine and take actions to protect members of the public and emergency workers. Radiological accident assessment must take account of all critical information available at any time and must be an iterative and dynamic process aimed at reviewing the response as more detailed and complete information becomes available. This manual provides the tools, generic procedures and data needed for an initial response to a non-reactor radiological accident. This manual is one out of a set of IAEA publications on emergency preparedness and response, including Method for the Development of Emergency Response Preparedness for Nuclear or Radiological Accidents (IAEA-TECDOC-953), Generic Assessment Procedures for Determining Protective Actions During a Reactor Accident (IAEA-TECDOC-955) and Intervention Criteria in a Nuclear or Radiation Emergency (Safety Series No. 109)

  20. Method for assigning sites to projected generic nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Holter, G.M.; Purcell, W.L.; Shutz, M.E.; Young, J.R.

    1986-07-01

    Pacific Northwest Laboratory developed a method for forecasting potential locations and startup sequences of nuclear power plants that will be required in the future but have not yet been specifically identified by electric utilities. Use of the method results in numerical ratings for potential nuclear power plant sites located in each of the 10 federal energy regions. The rating for each potential site is obtained from numerical factors assigned to each of 5 primary siting characteristics: (1) cooling water availability, (2) site land area, (3) power transmission land area, (4) proximity to metropolitan areas, and (5) utility plans for the site. The sequence of plant startups in each federal energy region is obtained by use of the numerical ratings and the forecasts of generic nuclear power plant startups obtained from the EIA Middle Case electricity forecast. Sites are assigned to generic plants in chronological order according to startup date.

  1. Method for assigning sites to projected generic nuclear power plants

    International Nuclear Information System (INIS)

    Holter, G.M.; Purcell, W.L.; Shutz, M.E.; Young, J.R.

    1986-07-01

    Pacific Northwest Laboratory developed a method for forecasting potential locations and startup sequences of nuclear power plants that will be required in the future but have not yet been specifically identified by electric utilities. Use of the method results in numerical ratings for potential nuclear power plant sites located in each of the 10 federal energy regions. The rating for each potential site is obtained from numerical factors assigned to each of 5 primary siting characteristics: (1) cooling water availability, (2) site land area, (3) power transmission land area, (4) proximity to metropolitan areas, and (5) utility plans for the site. The sequence of plant startups in each federal energy region is obtained by use of the numerical ratings and the forecasts of generic nuclear power plant startups obtained from the EIA Middle Case electricity forecast. Sites are assigned to generic plants in chronological order according to startup date

  2. Hospitals plan to start their own generic drug company

    Directory of Open Access Journals (Sweden)

    Robbins RA

    2018-01-01

    Full Text Available The New York Times reports that groups representing more than 450 hospitals plan to form their own generic drug company (1. Intermountain Healthcare is leading the collaboration with several other large hospital groups, Ascension, SSM Health and Trinity Health, in consultation with the U.S. Department of Veterans Affairs, to form a not-for-profit drug company. The new firm is looking to create generic versions of about 20 existing drugs that the group says cost too much now or are in short supply. The article did not name the drugs targeted but expects the first of its pharmaceutical products to become available in 2019. Members of the consortium will contribute funds to finance the new drug company.

  3. Security Policy for a Generic Space Exploration Communication Network Architecture

    Science.gov (United States)

    Ivancic, William D.; Sheehe, Charles J.; Vaden, Karl R.

    2016-01-01

    This document is one of three. It describes various security mechanisms and a security policy profile for a generic space-based communication architecture. Two other documents accompany this document- an Operations Concept (OpsCon) and a communication architecture document. The OpsCon should be read first followed by the security policy profile described by this document and then the architecture document. The overall goal is to design a generic space exploration communication network architecture that is affordable, deployable, maintainable, securable, evolvable, reliable, and adaptable. The architecture should also require limited reconfiguration throughout system development and deployment. System deployment includes subsystem development in a factory setting, system integration in a laboratory setting, launch preparation, launch, and deployment and operation in space.

  4. What do people really think of generic medicines? A systematic review and critical appraisal of literature on stakeholder perceptions of generic drugs.

    LENUS (Irish Health Repository)

    Dunne, Suzanne S

    2015-07-01

    Considerable emphasis is presently being placed on usage of generic medicines by governments focussed on the potential economic benefits associated with their use. Concurrently, there is increasing discussion in the lay media of perceived doubts regarding the quality and equivalence of generic medicines. The objective of this paper is to report the outcomes of a systematic search for peer-reviewed, published studies that focus on physician, pharmacist and patient\\/consumer perspectives of generic medicines.

  5. Acceptability and confidence in antiretroviral generics of physicians and HIV-infected patients in France.

    Science.gov (United States)

    Allavena, Clotilde; Jacomet, Christine; Pereira, Bruno; Morand-Joubert, Laurence; Bagheri, Haleh; Cotte, Laurent; Garaffo, Rodolphe; Gerbaud, Laurent; Dellamonica, Pierre

    2014-01-01

    Switching brand name medications to generics is recommended in France in the interest of cost effectiveness but patients and physicians are sometimes not convinced that switching is appropriate. Some antiretroviral (ARV) generics (ZDV, 3TC, NVP) have been marketed in France since 2013. A multicentric cross-sectional survey was performed in September 2013 to evaluate the perception of generics overall and ARV generics in physicians and HIV-infected patients and factors associated to their acceptability. Adult HIV outpatients were asked to complete a self-questionnaire on their perception of generics. Physicians completed a questionnaire on the acceptability of generics and ARV generics. Socio-demographic data, medical history and HIV history were collected. 116 physicians in 33 clinics (68% in University Hospital) included 556 patients (France-native 77%, active employment 59%, covered by social Insurance 100%, homosexual/bisexual contamination 47%, median HIV duration 13 years, hepatitis coinfection 16%, on ARV therapy 95%). Overall, patients accepted and had confidence in generics in 76% and 55% of the cases, respectively. Switching ARVs for generics was accepted by 44% of the patients but only by 17% if the pill burden was going to increase. 75% of the physicians would prescribe generics, but this decreased to only 26% if the combo had to be broken. The main reasons for non-prescription of generics were previous brand name ARV-induced side effects (35%), refusal of generics overall (37%), lack of understanding of generics (26%), risk of non-observance of treatment (44%), anxiety (47%) and depressive symptoms (25%). In multivariate analysis, factors associated with the acceptability of ARV generics in patients were the use of generics overall (p<0.001) and in physicians, the absence of concern regarding the drug efficacy (p<0.001) and being aware that the patient would accept generics overall (p=0.03) and ARV generics (p=0.04). No factors related to

  6. Generic environmental impact statement for license renewal of nuclear plants

    International Nuclear Information System (INIS)

    1996-05-01

    Volume 2 of the Generic Environmental Impact Statement for License Renewal of Nuclear Plants contains the appendices. These include: (A) General characterisitics and environmental settings of domestic nuclear plants, (B) Definition of impact initiators, (C) Socioeconomics and case studies, (D) Aquatic organisms and human health, (E) Radiation protection considerations, (F) Methodology for assessing impacts to aquatic ecology and water resources, (G) Postulated accidents, and (H) Environmental statutes and regulations affecting license renewal

  7. Generic singular continuous spectrum for ergodic Schr\\"odinger operators

    OpenAIRE

    Avila, Artur; Damanik, David

    2004-01-01

    We consider Schr\\"odinger operators with ergodic potential $V_\\omega(n)=f(T^n(\\omega))$, $n \\in \\Z$, $\\omega \\in \\Omega$, where $T:\\Omega \\to \\Omega$ is a non-periodic homeomorphism. We show that for generic $f \\in C(\\Omega)$, the spectrum has no absolutely continuous component. The proof is based on approximation by discontinuous potentials which can be treated via Kotani Theory.

  8. Simulation system architecture design for generic communications link

    Science.gov (United States)

    Tsang, Chit-Sang; Ratliff, Jim

    1986-01-01

    This paper addresses a computer simulation system architecture design for generic digital communications systems. It addresses the issues of an overall system architecture in order to achieve a user-friendly, efficient, and yet easily implementable simulation system. The system block diagram and its individual functional components are described in detail. Software implementation is discussed with the VAX/VMS operating system used as a target environment.

  9. Generic f(R) theories and classicality of their scalarons

    Energy Technology Data Exchange (ETDEWEB)

    Gannouji, Radouane [Department of Physics, Faculty of Science, Tokyo University of Science, 1-3, Kagurazaka, Shinjuku-ku, Tokyo 162-8601 (Japan); Sami, M., E-mail: samijamia@gmail.com [Kobayashi-Maskawa Institute for the Origin of Particles and the Universe, Nagoya University, Nagoya 464-8602 (Japan); Thongkool, I. [Harish-Chandra Research Institute, Chhatnag Road, Jhusi, Allahabad-211019 (India)

    2012-09-19

    We study quantum stability bound on the mass of scalaron in generic theories of f(R) gravity. We show that in these scenarios, the scalaron mass increases faster with local density of the environment than one-loop quantum correction to it thereby leading to violation of quantum bound on the chameleon mass. The introduction of quadratic curvature corrections in the action are shown to stabilize the model.

  10. Excipient Usage Technical Risk Assessment for Generic Solid Dose Products

    Directory of Open Access Journals (Sweden)

    Ajay Babu Pazhayattil

    2017-09-01

    Full Text Available This paper proposes an assessment methodology for solid dose generic small molecule drug products. It addresses the ‘usage of the excipient’ portion of the trinomial by utilizing the systematic approach of Risk Identification, Risk Analysis and Risk Evaluation as per ICH Q9 Quality Risk Management outlined for developing risk control strategies. The assessment and maintenance of excipient risk profile is essential to minimize any potential risk associated to excipients impacting patients.

  11. Computer-aided modeling framework – a generic modeling template

    DEFF Research Database (Denmark)

    Fedorova, Marina; Sin, Gürkan; Gani, Rafiqul

    and test models systematically, efficiently and reliably. In this way, development of products and processes can be made faster, cheaper and more efficient. In this contribution, as part of the framework, a generic modeling template for the systematic derivation of problem specific models is presented....... The application of the modeling template is highlighted with a case study related to the modeling of a catalytic membrane reactor coupling dehydrogenation of ethylbenzene with hydrogenation of nitrobenzene...

  12. Generic impact statement for commercial radioactive waste management

    International Nuclear Information System (INIS)

    Unruh, C.M.

    1976-01-01

    ERDA is preparing a generic environmental impact statement on the treatment and disposal of waste resulting from commercial reactors and post fission operations in the light water reactor (LWR) fuel cycle. Expert contributions will be provided by many of the ERDA national laboratories and contractors. The waste management aspects of the statement will be based on available technology as presented in the recently issued ''Alternatives for Managing Waste from Reactors and Post Fission Operations in the LWR Fuel Cycle,'' ERDA-76-43 Document. This 1500 page, five volume Technical Alternative Document (TAD) describes the status of technology (to September, 1975) for handling post fission radioactive waste generated by the production of electricity by nuclear power light water reactor-generator systems. The statement will be generic in nature discussing typical or hypothetical facilities in typical or hypothetical environments. It is not intended to replace environmental statements required in support of specific projects nor for Nuclear Regulatory Commission licensing procedures. A major purpose of the generic statement is to inform the public and to solicit comments on the ERDA program for: (1) the final disposition of commercial radioactive waste, (2) waste treatment, (3) waste interim storage, and (4) transportation of waste. The statement will discuss the ERDA contingency program to provide retrievable storage of such waste if they should be transferred to Federal custody prior to the availability of the geologic isolation facilities for terminal disposal. The generic statement will not address radioactive waste resulting from U.S. Defense Programs, the mining or milling of uranium, the management of waste from the breeder reactor program, waste from other nations, nor will it include an evaluation of the impact of waste resulting from power sources other than light water reactors

  13. GENERIC Integrators: Structure Preserving Time Integration for Thermodynamic Systems

    Science.gov (United States)

    Öttinger, Hans Christian

    2018-04-01

    Thermodynamically admissible evolution equations for non-equilibrium systems are known to possess a distinct mathematical structure. Within the GENERIC (general equation for the non-equilibrium reversible-irreversible coupling) framework of non-equilibrium thermodynamics, which is based on continuous time evolution, we investigate the possibility of preserving all the structural elements in time-discretized equations. Our approach, which follows Moser's [1] construction of symplectic integrators for Hamiltonian systems, is illustrated for the damped harmonic oscillator. Alternative approaches are sketched.

  14. Pure versus hybrid: performance implications of Porter's generic strategies.

    Science.gov (United States)

    Kumar, K; Subramanian, R; Yauger, C

    1997-01-01

    This article identifies the strategic types in the hospital industry based on the hospital's use of Porter's generic strategies in their pure and hybrid forms. The article also examines differences in performance of hospitals across strategic types. Results indicate that hospitals that follow a focussed cost leadership strategy, in general, have superior performance on a variety of performance measures, while hospitals that use a combination of cost leadership and differentiation perform the poorest. Implications of findings for hospital administrators are also discussed.

  15. Double covering of diffeomorphisms for superstrings in generic curved space

    International Nuclear Information System (INIS)

    Ne'eman, Y.; Sijacki, D.

    1986-01-01

    The embedding of the superstring in a generic curved space involves the use of world-spinors behaving according to the (infinite) unitary representations of SL-bar(10,R), the double-covering of the linear group on R 10 . A supersymmetric extrension is provided by the embedding of GL-bar(10,R) in the supergroup GQ-bar(10,R) whose flat limit reproduces Poincare supersymmetry

  16. Generic boundary scattering in the open XXZ chain

    International Nuclear Information System (INIS)

    Doikou, Anastasia

    2008-01-01

    The open critical XXZ spin chain with a general right boundary and a trivial diagonal left boundary is considered. Within this framework we propose a simple computation of the exact generic boundary S-matrix (with diagonal and non-diagonal entries), starting from the 'bare' Bethe ansatz equations. Our results as anticipated coincide with the ones obtained by Ghoshal and Zamolodchikov, after assuming suitable identifications of the bulk and boundary parameters

  17. A Generic Procedure for BRDF Normalization of Remotely Sensed Data

    Energy Technology Data Exchange (ETDEWEB)

    D. Yuan

    2003-04-01

    A generic procedure for Bidirectional Reflectance Distribution Function (BRDF) normalization for airborne multispectral images has been developed and implemented as an add-on module of ENVI at the U.S. Department of Energy's Remote Sensing Laboratory. The main advantage of this procedure is that it does not require multiple image acquisitions over the same area for establishing empirical BRDF functions.

  18. Generic Safety Requirements for Developing Safe Insulin Pump Software

    Science.gov (United States)

    Zhang, Yi; Jetley, Raoul; Jones, Paul L; Ray, Arnab

    2011-01-01

    Background The authors previously introduced a highly abstract generic insulin infusion pump (GIIP) model that identified common features and hazards shared by most insulin pumps on the market. The aim of this article is to extend our previous work on the GIIP model by articulating safety requirements that address the identified GIIP hazards. These safety requirements can be validated by manufacturers, and may ultimately serve as a safety reference for insulin pump software. Together, these two publications can serve as a basis for discussing insulin pump safety in the diabetes community. Methods In our previous work, we established a generic insulin pump architecture that abstracts functions common to many insulin pumps currently on the market and near-future pump designs. We then carried out a preliminary hazard analysis based on this architecture that included consultations with many domain experts. Further consultation with domain experts resulted in the safety requirements used in the modeling work presented in this article. Results Generic safety requirements for the GIIP model are presented, as appropriate, in parameterized format to accommodate clinical practices or specific insulin pump criteria important to safe device performance. Conclusions We believe that there is considerable value in having the diabetes, academic, and manufacturing communities consider and discuss these generic safety requirements. We hope that the communities will extend and revise them, make them more representative and comprehensive, experiment with them, and use them as a means for assessing the safety of insulin pump software designs. One potential use of these requirements is to integrate them into model-based engineering (MBE) software development methods. We believe, based on our experiences, that implementing safety requirements using MBE methods holds promise in reducing design/implementation flaws in insulin pump development and evolutionary processes, therefore improving

  19. From generic to biosimilar drugs: why take an innovative pace?

    Directory of Open Access Journals (Sweden)

    Fereshteh Barei

    2012-12-01

    Full Text Available BACKGROUND: The transition of the generic/biotechnology industry to innovation by investing in innovative R&D will enhance business expertise in biopharmaceutical development and manufacturing. The major impact of this evolution is on patient access to treatment and savings for the health care systems. OBJECTIVES: The aim of this paper is to investigate the innovative aspect of biosimilar and biobetter products, manufactured by some big generic companies. We will also try to explore the innovative business strategy, implementing this high risk product differentiation policy. METHODS: This qualitative research is conducted by a series of interviews with CEOs, physicians, and academics in different countries. The qualitative data obtained were analyzed by Nvivo9.2 software. A literature review has also contributed to our key findings. RESULTS: The results show that switching into biosimilars/biobetters is an innovative strategic choice, approved by some big generic pharmaceutical companies. The biosimilar/biobetter products can be considered innovative because of their value added quality. CONCLUSION: Expanding the product portfolio to biosimilars/biobetter can be considered as a long run strategy in the innovative business plans aiming to ensure the market access. Patients and their access to better treatments are major components of these innovative business models.

  20. A Generic Modeling Process to Support Functional Fault Model Development

    Science.gov (United States)

    Maul, William A.; Hemminger, Joseph A.; Oostdyk, Rebecca; Bis, Rachael A.

    2016-01-01

    Functional fault models (FFMs) are qualitative representations of a system's failure space that are used to provide a diagnostic of the modeled system. An FFM simulates the failure effect propagation paths within a system between failure modes and observation points. These models contain a significant amount of information about the system including the design, operation and off nominal behavior. The development and verification of the models can be costly in both time and resources. In addition, models depicting similar components can be distinct, both in appearance and function, when created individually, because there are numerous ways of representing the failure space within each component. Generic application of FFMs has the advantages of software code reuse: reduction of time and resources in both development and verification, and a standard set of component models from which future system models can be generated with common appearance and diagnostic performance. This paper outlines the motivation to develop a generic modeling process for FFMs at the component level and the effort to implement that process through modeling conventions and a software tool. The implementation of this generic modeling process within a fault isolation demonstration for NASA's Advanced Ground System Maintenance (AGSM) Integrated Health Management (IHM) project is presented and the impact discussed.

  1. Origami building blocks: Generic and special four-vertices

    Science.gov (United States)

    Waitukaitis, Scott; van Hecke, Martin

    2016-02-01

    Four rigid panels connected by hinges that meet at a point form a four-vertex, the fundamental building block of origami metamaterials. Most materials designed so far are based on the same four-vertex geometry, and little is known regarding how different geometries affect folding behavior. Here we systematically categorize and analyze the geometries and resulting folding motions of Euclidean four-vertices. Comparing the relative sizes of sector angles, we identify three types of generic vertices and two accompanying subtypes. We determine which folds can fully close and the possible mountain-valley assignments. Next, we consider what occurs when sector angles or sums thereof are set equal, which results in 16 special vertex types. One of these, flat-foldable vertices, has been studied extensively, but we show that a wide variety of qualitatively different folding motions exist for the other 15 special and 3 generic types. Our work establishes a straightforward set of rules for understanding the folding motion of both generic and special four-vertices and serves as a roadmap for designing origami metamaterials.

  2. Nuclear power plant Generic Aging Lessons Learned (GALL). Appendix B

    International Nuclear Information System (INIS)

    Kasza, K.E.; Diercks, D.R.; Holland, J.W.; Choi, S.U.

    1996-12-01

    The purpose of this generic aging lessons learned (GALL) review is to provide a systematic review of plant aging information in order to assess materials and component aging issues related to continued operation and license renewal of operating reactors. Literature on mechanical, structural, and thermal-hydraulic components and systems reviewed consisted of 97 Nuclear Plant Aging Research (NPAR) reports, 23 NRC Generic Letters, 154 Information Notices, 29 Licensee Event Reports (LERs), 4 Bulletins, and 9 Nuclear Management and Resources Council Industry Reports (NUMARC IRs) and literature on electrical components and systems reviewed consisted of 66 NPAR reports, 8 NRC Generic Letters, 111 Information Notices, 53 LERs, 1 Bulletin, and 1 NUMARC IR. More than 550 documents were reviewed. The results of these reviews were systematized using a standardized GALL tabular format and standardized definitions of aging-related degradation mechanisms and effects. The tables are included in volumes 1 and 2 of this report. A computerized data base has also been developed for all review tables and can be used to expedite the search for desired information on structures, components, and relevant aging effects. A survey of the GALL tables reveals that all ongoing significant component aging issues are currently being addressed by the regulatory process. However, the aging of what are termed passive components has been highlighted for continued scrutiny. This report consists of Volume 2, which consists of the GALL literature review tables for the NUMARC Industry Reports reviewed for the report

  3. Generic versus brand-name North American topical glaucoma drops.

    Science.gov (United States)

    Mammo, Zaid N; Flanagan, John G; James, David F; Trope, Graham E

    2012-02-01

    To determine whether brand-name glaucoma drops differ from generic equivalents in bottle design, viscosity, surface tension, and volume in North America. Experimental study. We studied 5 bottles each of 11 kinds of glaucoma drops. Density-based calculations of drop volume were assessed using 0.1 mg analytic balance. Viscosity was measured using rotational rheometery. Bottle tip diameter was measured using 0.05 mm Vernier calipers. Surface tension was measured using a Fisher Scientific (Ottawa, ON) tensiometer. For the American brand-name Timoptic XE, the average drop volume was 38 ± 3.1 μL versus 24 ± 1.5 μL of Timolol GFS (p brand-name Timoptic XE, the average drop volume was 42 ± 4.0 μL versus 25 ± 2 μL of timolol maleate EX (p brand-name Timoptic drop volume was 28 ± 1.4 μL versus 35 ± 1.9 μL Apo-Timop (p brand-name Timoptic delivered significantly smaller drop volumes than generic Apo-Timop. Careful consideration should be given to drop viscosity and bottle design when generic ophthalmic products are evaluated for interchangeability and market entry. Copyright © 2012 Canadian Ophthalmological Society. Published by Elsevier Inc. All rights reserved.

  4. Deeply discounted medications: Implications of generic prescription drug wars.

    Science.gov (United States)

    Czechowski, Jessica L; Tjia, Jennifer; Triller, Darren M

    2010-01-01

    To describe the history of generic prescription pricing programs at major pharmacy chains and their potential implications on prescribing, quality of care, and patient safety. Publicly available generic prescription discount program drug lists as of May 1, 2009. Fierce competition among major pharmacy chains such as Walgreens, CVS, and Walmart has led to a generic prescription pricing war with unclear public health implications. Introduced in 2006, currently 7 of the 10 largest pharmacy chains advertise a version of a deeply discounted medication (DDM) program, accounting for more than 25,000 locations nationally. By early 2008, almost 70 million Americans had used these programs. Although DDM programs lower drug costs for many patients, DDM formularies include potentially ineffective or harmful medications, have the potential to influence physician prescribing behavior, and may impair pharmacists' ability to review complete drug-dispensing records. DDMs are widespread but have the potential for unintended consequences on patients, providers, and the health care system. A systematic review of DDMs needs to evaluate the clinical, economic, and system-level implications of such programs.

  5. Spatial electric load forecasting

    CERN Document Server

    Willis, H Lee

    2002-01-01

    Spatial Electric Load Forecasting Consumer Demand for Power and ReliabilityCoincidence and Load BehaviorLoad Curve and End-Use ModelingWeather and Electric LoadWeather Design Criteria and Forecast NormalizationSpatial Load Growth BehaviorSpatial Forecast Accuracy and Error MeasuresTrending MethodsSimulation Method: Basic ConceptsA Detailed Look at the Simulation MethodBasics of Computerized SimulationAnalytical Building Blocks for Spatial SimulationAdvanced Elements of Computerized SimulationHybrid Trending-Simulation MethodsAdvanced

  6. Cognitive Load and Cooperation

    DEFF Research Database (Denmark)

    Døssing, Felix Sebastian; Piovesan, Marco; Wengström, Erik Roland

    2017-01-01

    We study the effect of intuitive and reflective processes on cooperation using cognitive load. Compared with time constraint, which has been used in the previous literature, cognitive load is a more direct way to block reflective processes, and thus a more suitable way to study the link between...... intuition and cooperation. Using a repeated public goods game, we study the effect of different levels of cognitive load on contributions. We show that a higher cognitive load increases the initial level of cooperation. In particular, subjects are significantly less likely to fully free ride under high...... cognitive load....

  7. Do higher-priced generic medicines enjoy a competitive advantage under reference pricing?

    Science.gov (United States)

    Puig-Junoy, Jaume

    2012-11-01

    In many countries with generic reference pricing, generic producers and distributors compete by means of undisclosed discounts offered to pharmacies in order to reduce acquisition costs and to induce them to dispense their generic to patients in preference over others. The objective of this article is to test the hypothesis that under prevailing reference pricing systems for generic medicines, those medicines sold at a higher consumer price may enjoy a competitive advantage. Real transaction prices for 179 generic medicines acquired by pharmacies in Spain have been used to calculate the discount rate on acquisition versus reimbursed costs to pharmacies. Two empirical hypotheses are tested: the discount rate at which pharmacies acquire generic medicines is higher for those pharmaceutical presentations for which there are more generic competitors; and, the discount rate at which pharmacies acquire generic medicines is higher for those pharmaceutical forms for which the consumer price has declined less in relation to the consumer price of the brand drug before generic entry (higher-priced generic medicines). An average discount rate of 39.3% on acquisition versus reimbursed costs to pharmacies has been observed. The magnitude of the discount positively depends on the number of competitors in the market. The higher the ratio of the consumer price of the generic to that of the brand drug prior to generic entry (i.e. the smaller the price reduction of the generic in relation to the brand drug), the larger the discount rate. Under reference pricing there is intense price competition among generic firms in the form of unusually high discounts to pharmacies on official ex-factory prices reimbursed to pharmacies. However, this effect is highly distorting because it favours those medicines with a higher relative price in relation to the brand price before generic entry.

  8. Numerical simulations of earthquake effects on tunnels for generic nuclear waste repositories

    International Nuclear Information System (INIS)

    Wahi, K.K.; Trent, B.C.; Maxwell, D.E.; Pyke, R.M.; Young, C.; Ross-Brown, D.M.

    1980-12-01

    The objectives of this generic study were to use numerical modeling techniques to determine under what conditions seismic waves generated by an earthquake might cause instability to an underground opening, or cause fracturing and joint movement that would lead to an increase in the permeability of the rock mass. Three different rock types (salt, granite, and shale) were considered as host media for the repository located at a depth of 600 meters. Special material models were developed to account for the nonlinear material behavior of each rock type. The sensitivity analysis included variations in the in situ stress ratio, joint geometry, pore pressures, and the presence or absence of a fault. Three different sets of earthquake motions were used to excite the rock mass. The calculations were performed using the STEALTH codes in a three-stage process. It was concluded that the methodology is suitable for studying the effects of earthquakes on underground openings. In general, the study showed that moderate earthquakes (up to 0.41 g) did not cause instability of the tunnel or major fracturing of the rock mass. A rock-burst tremor with accelerations up to 0.95 g, however, was found to be amplified around the tunnel, and fracturing occurred as a result of the seismic loading in salt and granite. In shale, even moderate seismic loading resulted in tunnel collapse. Other questions appraised in the study include the stability of granite tunnels under various combinations of joint geometry and in situ stress states, and the overall stability of tunnels in shale subject to the thermomechanical loading conditions anticipated in an underground waste repository

  9. Loading relativistic Maxwell distributions in particle simulations

    Science.gov (United States)

    Zenitani, S.

    2015-12-01

    In order to study energetic plasma phenomena by using particle-in-cell (PIC) and Monte-Carlo simulations, we need to deal with relativistic velocity distributions in these simulations. However, numerical algorithms to deal with relativistic distributions are not well known. In this contribution, we overview basic algorithms to load relativistic Maxwell distributions in PIC and Monte-Carlo simulations. For stationary relativistic Maxwellian, the inverse transform method and the Sobol algorithm are reviewed. To boost particles to obtain relativistic shifted-Maxwellian, two rejection methods are newly proposed in a physically transparent manner. Their acceptance efficiencies are 􏰅50% for generic cases and 100% for symmetric distributions. They can be combined with arbitrary base algorithms.

  10. Comparing Generic Drug Markets in Europe and the United States: Prices, Volumes, and Spending.

    Science.gov (United States)

    Wouters, Olivier J; Kanavos, Panos G; McKEE, Martin

    2017-09-01

    Policy Points: Our study indicates that there are opportunities for cost savings in generic drug markets in Europe and the United States. Regulators should make it easier for generic drugs to reach the market. Regulators and payers should apply measures to stimulate price competition among generic drugmakers and to increase generic drug use. To meaningfully evaluate policy options, it is important to analyze historical context and understand why similar initiatives failed previously. Rising drug prices are putting pressure on health care budgets. Policymakers are assessing how they can save money through generic drugs. We compared generic drug prices and market shares in 13 European countries, using data from 2013, to assess the amount of variation that exists between countries. To place these results in context, we reviewed evidence from recent studies on the prices and use of generics in Europe and the United States. We also surveyed peer-reviewed studies, gray literature, and books published since 2000 to (1) outline existing generic drug policies in European countries and the United States; (2) identify ways to increase generic drug use and to promote price competition among generic drug companies; and (3) explore barriers to implementing reform of generic drug policies, using a historical example from the United States as a case study. The prices and market shares of generics vary widely across Europe. For example, prices charged by manufacturers in Switzerland are, on average, more than 2.5 times those in Germany and more than 6 times those in the United Kingdom, based on the results of a commonly used price index. The proportion of prescriptions filled with generics ranges from 17% in Switzerland to 83% in the United Kingdom. By comparison, the United States has historically had low generic drug prices and high rates of generic drug use (84% in 2013), but has in recent years experienced sharp price increases for some off-patent products. There are policy

  11. Generic versus brand-name drugs used in cardiovascular diseases.

    Science.gov (United States)

    Manzoli, Lamberto; Flacco, Maria Elena; Boccia, Stefania; D'Andrea, Elvira; Panic, Nikola; Marzuillo, Carolina; Siliquini, Roberta; Ricciardi, Walter; Villari, Paolo; Ioannidis, John P A

    2016-04-01

    This meta-analysis aimed to compare the efficacy and adverse events, either serious or mild/moderate, of all generic versus brand-name cardiovascular medicines. We searched randomized trials in MEDLINE, Scopus, EMBASE, Cochrane Controlled Clinical Trial Register, and ClinicalTrials.gov (last update December 1, 2014). Attempts were made to contact the investigators of all potentially eligible trials. Two investigators independently extracted and analyzed soft (including systolic blood pressure, LDL cholesterol, and others) and hard efficacy outcomes (including major cardiovascular adverse events and death), minor/moderate and serious adverse events. We included 74 randomized trials; 53 reported ≥1 efficacy outcome (overall sample 3051), 32 measured mild/moderate adverse events (n = 2407), and 51 evaluated serious adverse events (n = 2892). We included trials assessing ACE inhibitors (n = 12), anticoagulants (n = 5), antiplatelet agents (n = 17), beta-blockers (n = 11), calcium channel blockers (n = 7); diuretics (n = 13); statins (n = 6); and others (n = 3). For both soft and hard efficacy outcomes, 100 % of the trials showed non-significant differences between generic and brand-name drugs. The aggregate effect size was 0.01 (95 % CI -0.05; 0.08) for soft outcomes; -0.06 (-0.71; 0.59) for hard outcomes. All but two trials showed non-significant differences in mild/moderate adverse events, and aggregate effect size was 0.07 (-0.06; 0.20). Comparable results were observed for each drug class and in each stratified meta-analysis. Overall, 8 serious possibly drug-related adverse events were reported: 5/2074 subjects on generics; 3/2076 subjects on brand-name drugs (OR 1.69; 95 % CI 0.40-7.20). This meta-analysis strengthens the evidence for clinical equivalence between brand-name and generic cardiovascular drugs. Physicians could be reassured about prescribing generic cardiovascular drugs, and health care organization about endorsing their wider

  12. Generic Advertising Optimum Budget for Iran’s Milk Industry

    Directory of Open Access Journals (Sweden)

    H. Shahbazi

    2016-05-01

    Full Text Available Introduction One of the main targets of planners, decision makers and governments is increasing society health with promotion and production of suitable and healthy food. One of the basic commodities that have important role in satisfaction of required human food is milk. So, some part of government and producer healthy budget allocate to milk consumption promotion by using generic advertising. If effectiveness of advertising budget on profitability is more, producer will have more willing to spend for advertising. Determination of optimal generic advertising budget is one of important problem in managerial decision making in producing firm as well as increase in consumption and profit and decrease in wasting and non-optimality of budget. Materials and Methods: In this study, optimal generic advertising budget intensity index (advertising budget share of production cost was estimated under two different scenarios by using equilibrium replacement model. In equilibrium replacement model, producer surplus are maximized in respect to generic advertising in retail level. According to market where two levels of farm and processing before retail exist and there is trade in farm and retail level, we present different models. Fixed and variable proportion hypothesis is another one. Finally, eight relations are presented for determination of milk generic advertising optimum budget. So, we use data from several resources such as previous studies, national (Iran Static center and international institute (Fao formal data and own estimation. Because there are several estimations in previous studies, we identify some scenarios (in two general scenarios for calculation of milk generic advertising optimum budget. Results and Discussion: Estimation of milk generic advertising optimum budget in scenario 1 shows that in case of one market level, fixed supplies and no trade, optimum budget is 0.4672539 percent. In case of one market level and no trade, optimum

  13. Societal value of generic medicines beyond cost-saving through reduced prices.

    Science.gov (United States)

    Dylst, Pieter; Vulto, Arnold; Simoens, Steven

    2015-01-01

    This paper aims to provide an overview of the added societal value of generic medicines beyond their cost-saving potential through reduced prices. In addition, an observational case study will document the impact of generic entry on access to pharmacotherapy in The Netherlands and an illustrative exercise was carried out to highlight the budget impact of generic entry. A narrative literature review was carried out to explore the impact of generic medicines on access to pharmacotherapy, innovation and medication adherence. Data from the Medicines and Medical Devices Information Project database in The Netherlands were used for the case study in which the impact of generic medicine entrance on the budget and the number of users was calculated as an illustrative exercise. Generic medicines have an additional societal value beyond their cost-saving potential through reduced prices. Generic medicines increase access to pharmacotherapy, provide a stimulus for innovation by both originator companies and generic companies and, under the right circumstances, have a positive impact on medication adherence. Generic medicines offer more to society than just their cost-saving potential through reduced prices. As such, governments must not focus only on the prices of generic medicines as this will threaten their long-term sustainability. Governments must therefore act appropriately and implement a coherent set of policies to increase the use of generic medicines.

  14. Optimisation of load control

    International Nuclear Information System (INIS)

    Koponen, P.

    1998-01-01

    Electricity cannot be stored in large quantities. That is why the electricity supply and consumption are always almost equal in large power supply systems. If this balance were disturbed beyond stability, the system or a part of it would collapse until a new stable equilibrium is reached. The balance between supply and consumption is mainly maintained by controlling the power production, but also the electricity consumption or, in other words, the load is controlled. Controlling the load of the power supply system is important, if easily controllable power production capacity is limited. Temporary shortage of capacity causes high peaks in the energy price in the electricity market. Load control either reduces the electricity consumption during peak consumption and peak price or moves electricity consumption to some other time. The project Optimisation of Load Control is a part of the EDISON research program for distribution automation. The following areas were studied: Optimization of space heating and ventilation, when electricity price is time variable, load control model in power purchase optimization, optimization of direct load control sequences, interaction between load control optimization and power purchase optimization, literature on load control, optimization methods and field tests and response models of direct load control and the effects of the electricity market deregulation on load control. An overview of the main results is given in this chapter

  15. Optimisation of load control

    Energy Technology Data Exchange (ETDEWEB)

    Koponen, P [VTT Energy, Espoo (Finland)

    1998-08-01

    Electricity cannot be stored in large quantities. That is why the electricity supply and consumption are always almost equal in large power supply systems. If this balance were disturbed beyond stability, the system or a part of it would collapse until a new stable equilibrium is reached. The balance between supply and consumption is mainly maintained by controlling the power production, but also the electricity consumption or, in other words, the load is controlled. Controlling the load of the power supply system is important, if easily controllable power production capacity is limited. Temporary shortage of capacity causes high peaks in the energy price in the electricity market. Load control either reduces the electricity consumption during peak consumption and peak price or moves electricity consumption to some other time. The project Optimisation of Load Control is a part of the EDISON research program for distribution automation. The following areas were studied: Optimization of space heating and ventilation, when electricity price is time variable, load control model in power purchase optimization, optimization of direct load control sequences, interaction between load control optimization and power purchase optimization, literature on load control, optimization methods and field tests and response models of direct load control and the effects of the electricity market deregulation on load control. An overview of the main results is given in this chapter

  16. Does the market share of generic medicines influence the price level?: a European analysis.

    Science.gov (United States)

    Dylst, Pieter; Simoens, Steven

    2011-10-01

    After the expiry of patents for originator medicines, generic medicines can enter the market, and price competition may occur. This process generates savings to the healthcare payer and to patients, but knowledge about the factors affecting price competition in the pharmaceutical market following patent expiry is still limited. This study aimed to investigate the relationship between the market share of generic medicines and the change of the medicine price level in European off-patent markets. Data on medicine volumes and values for 35 active substances were purchased from IMS Health. Ex-manufacturer prices were used, and the analysis was limited to medicines in immediate-release, oral, solid dosage forms. Countries included were Austria, Belgium, Denmark, Germany, France, Italy, the Netherlands, Spain, Sweden and the UK, which constitute a mix of countries with low and high generic medicines market shares. Data were available from June 2002 until March 2007. Market volume has risen in both high and low generic market share countries (+29.27% and +27.40%, respectively), but the cause of the rise is different for the two markets. In low generic market share countries, the rise was caused by the increased use of generic medicines, while in high market share countries, the rise was driven by the increased use of generic medicines and a shift of use from originator to generic medicines. Market value was substantially decreased in high generic market share countries (-26.6%), while the decrease in low generic market share countries was limited (-0.06%). In high generic market share countries, medicine prices dropped by -43.18% versus -21.56% in low market share countries. The extent to which price competition from generic medicines leads to price reductions appears to vary according to the market share of generic medicines. High generic market share countries have seen a larger decrease in medicine prices than low market share countries.

  17. Mark II containment lead plant program load evaluation and acceptance criteria

    International Nuclear Information System (INIS)

    1978-10-01

    The report, prepared by the Office of Nuclear Reactor Regulation, addresses the portion of the Mark II owner's program that provides a generic methodology for establishing design basis LOCA and safety relief valve loads for the lead Mark II facilities (Zimmer, Shoreham, and LaSalle), i.e., the lead plant program. The report includes an evaluation of the Mark II owner's load methodology, a description of load methodologies that we find acceptable for use in the individual plant unique assessments, and the basis for the stated conclusions

  18. Concentrated loads on concrete

    DEFF Research Database (Denmark)

    Lorenzen, Karen Grøndahl; Nielsen, Mogens Peter

    1997-01-01

    This report deals with concentrated loads on concrete.A new upper bound solution in the axisymmetrical case of a point load in the center of the end face of a cylinder is developed.Based on previous work dealing with failure mechanisms and upper bound solutions, new approximate formulas are devel......This report deals with concentrated loads on concrete.A new upper bound solution in the axisymmetrical case of a point load in the center of the end face of a cylinder is developed.Based on previous work dealing with failure mechanisms and upper bound solutions, new approximate formulas...

  19. Critical Axial Load

    Directory of Open Access Journals (Sweden)

    Walt Wells

    2008-01-01

    Full Text Available Our objective in this paper is to solve a second order differential equation for a long, simply supported column member subjected to a lateral axial load using Heun's numerical method. We will use the solution to find the critical load at which the column member will fail due to buckling. We will calculate this load using Euler's derived analytical approach for an exact solution, as well as Euler's Numerical Method. We will then compare the three calculated values to see how much they deviate from one another. During the critical load calculation, it will be necessary to calculate the moment of inertia for the column member.

  20. Load regulating expansion fixture

    International Nuclear Information System (INIS)

    Wagner, L.M.; Strum, M.J.

    1998-01-01

    A free standing self contained device for bonding ultra thin metallic films, such as 0.001 inch beryllium foils is disclosed. The device will regulate to a predetermined load for solid state bonding when heated to a bonding temperature. The device includes a load regulating feature, whereby the expansion stresses generated for bonding are regulated and self adjusting. The load regulator comprises a pair of friction isolators with a plurality of annealed copper members located there between. The device, with the load regulator, will adjust to and maintain a stress level needed to successfully and economically complete a leak tight bond without damaging thin foils or other delicate components. 1 fig

  1. Laterally loaded masonry

    DEFF Research Database (Denmark)

    Raun Gottfredsen, F.

    In this thesis results from experiments on mortar joints and masonry as well as methods of calculation of strength and deformation of laterally loaded masonry are presented. The strength and deformation capacity of mortar joints have been determined from experiments involving a constant compressive...... stress and increasing shear. The results show a transition to pure friction as the cohesion is gradually destroyed. An interface model of a mortar joint that can take into account this aspect has been developed. Laterally loaded masonry panels have also been tested and it is found to be characteristic...... that laterally loaded masonry exhibits a non-linear load-displacement behaviour with some ductility....

  2. Electrical load modeling

    Energy Technology Data Exchange (ETDEWEB)

    Valgas, Helio Moreira; Pinto, Roberto del Giudice R.; Franca, Carlos [Companhia Energetica de Minas Gerais (CEMIG), Belo Horizonte, MG (Brazil); Lambert-Torres, Germano; Silva, Alexandre P. Alves da; Pires, Robson Celso; Costa, Junior, Roberto Affonso [Escola Federal de Engenharia de Itajuba, MG (Brazil)

    1994-12-31

    Accurate dynamic load models allow more precise calculations of power system controls and stability limits, which are critical mainly in the operation planning of power systems. This paper describes the development of a computer program (software) for static and dynamic load model studies using the measurement approach for the CEMIG system. Two dynamic load model structures are developed and tested. A procedure for applying a set of measured data from an on-line transient recording system to develop load models is described. (author) 6 refs., 17 figs.

  3. Generic methods for design of small-bore pipe supports

    International Nuclear Information System (INIS)

    Clark, G.L.; LaSalle, F.R.

    1981-01-01

    Large numbers of supports for small-bore, low-temperature pipe are utilized in nuclear power plants. These supports often must meet ASME code and project seismic design requirements. Detailed analysis for each support is time consuming and costly. This paper describes some economical generic methods developed to design and qualify supports for two-inch and smaller pipe operating at temperatures less than 300 0 F (185 0 C), on the Fast Flux Test Facility. Use of standard designs, standard support spacing tables, anchor bolt and baseplate considerations, and field qualification methods are discussed

  4. ATLAS Metadata Interface (AMI), a generic metadata framework

    CERN Document Server

    Fulachier, Jerome; The ATLAS collaboration

    2016-01-01

    The ATLAS Metadata Interface (AMI) is a mature application of more than 15 years of existence. Mainly used by the ATLAS experiment at CERN, it consists of a very generic tool ecosystem for metadata aggregation and cataloguing. We briefly describe the architecture, the main services and the benefits of using AMI in big collaborations, especially for high energy physics. We focus on the recent improvements, for instance: the lightweight clients (Python, Javascript, C++), the new smart task server system and the Web 2.0 AMI framework for simplifying the development of metadata-oriented web interfaces.

  5. Poster: A modern Python interface for the Generic Mapping Tools

    OpenAIRE

    Uieda, Leonardo; Wessel, Paul

    2017-01-01

    Poster presentation at the AGU Fall Meeting 2017.Abstract: IN51B-0018Inkscape source files for the poster and a Jupyter notebook with the demo are on the Github repository: github.com/leouieda/agu2017 The demo notebook can be run online using the MyBinder service: agu2017demo.gmtpython.xyzAbstractFigures generated by The Generic Mapping Tools (GMT) are present in countless publications across the Earth sciences. The command-line interface of GMT lends the tool its flexibility bu...

  6. Multiword expressions acquisition a generic and open framework

    CERN Document Server

    Ramisch, Carlos

    2014-01-01

    ?This book is an excellent introduction to multiword expressions. It provides a unique, comprehensive and up-to-date overview of this exciting topic in computational linguistics. The first part describes the diversity and richness of multiword expressions, including many examples in several languages. These constructions are not only complex and arbitrary, but also much more frequent than one would guess, making them a real nightmare for natural language processing applications.  The second part introduces a new generic framework for automatic acquisition of multiword expressions from texts.

  7. ATLAS Metadata Interface (AMI), a generic metadata framework

    Science.gov (United States)

    Fulachier, J.; Odier, J.; Lambert, F.; ATLAS Collaboration

    2017-10-01

    The ATLAS Metadata Interface (AMI) is a mature application of more than 15 years of existence. Mainly used by the ATLAS experiment at CERN, it consists of a very generic tool ecosystem for metadata aggregation and cataloguing. We briefly describe the architecture, the main services and the benefits of using AMI in big collaborations, especially for high energy physics. We focus on the recent improvements, for instance: the lightweight clients (Python, JavaScript, C++), the new smart task server system and the Web 2.0 AMI framework for simplifying the development of metadata-oriented web interfaces.

  8. Phase transitions in restricted Boltzmann machines with generic priors

    Science.gov (United States)

    Barra, Adriano; Genovese, Giuseppe; Sollich, Peter; Tantari, Daniele

    2017-10-01

    We study generalized restricted Boltzmann machines with generic priors for units and weights, interpolating between Boolean and Gaussian variables. We present a complete analysis of the replica symmetric phase diagram of these systems, which can be regarded as generalized Hopfield models. We underline the role of the retrieval phase for both inference and learning processes and we show that retrieval is robust for a large class of weight and unit priors, beyond the standard Hopfield scenario. Furthermore, we show how the paramagnetic phase boundary is directly related to the optimal size of the training set necessary for good generalization in a teacher-student scenario of unsupervised learning.

  9. Generic sorting of raft lipids into secretory vesicles in yeast

    DEFF Research Database (Denmark)

    Surma, Michal A; Klose, Christian; Klemm, Robin W

    2011-01-01

    Previous work has showed that ergosterol and sphingolipids become sorted to secretory vesicles immunoisolated using a chimeric, artificial raft membrane protein as bait. In this study, we have extended this analysis to three populations of secretory vesicles isolated using natural yeast plasma...... a complete lipid overview of the yeast late secretory pathway. We could show that vesicles captured with different baits carry the same cargo and have almost identical lipid compositions; being highly enriched in ergosterol and sphingolipids. This finding indicates that lipid raft sorting is a generic...

  10. PRA-Code Upgrade to Handle a Generic Problem

    International Nuclear Information System (INIS)

    Wilson, J. R.

    1999-01-01

    During the probabilistic risk assessment (PRA) for the proposed Yucca Mountain nuclear waste repository, a problem came up that could not be handled by most PRA computer codes. This problem deals with dependencies between sequential events in time. Two similar scenarios that illustrate this problem are LOOP nonrecovery and sequential wearout failures with units of time. The purpose of this paper is twofold: To explain the problem generically, and to show how the PRA code at the INEEL, SAPHIRE, has been modified to solve this problem correctly

  11. ATLAS Metadata Interface (AMI), a generic metadata framework

    CERN Document Server

    AUTHOR|(SzGeCERN)573735; The ATLAS collaboration; Odier, Jerome; Lambert, Fabian

    2017-01-01

    The ATLAS Metadata Interface (AMI) is a mature application of more than 15 years of existence. Mainly used by the ATLAS experiment at CERN, it consists of a very generic tool ecosystem for metadata aggregation and cataloguing. We briefly describe the architecture, the main services and the benefits of using AMI in big collaborations, especially for high energy physics. We focus on the recent improvements, for instance: the lightweight clients (Python, JavaScript, C++), the new smart task server system and the Web 2.0 AMI framework for simplifying the development of metadata-oriented web interfaces.

  12. Development of an Enhanced Generic Data Mining Life Cycle (DMLC)

    OpenAIRE

    Hofmann, Markus; Tierney, Brendan

    2017-01-01

    Data mining projects are complex and have a high failure rate. In order to improve project management and success rates of such projects a life cycle is vital to the overall success of the project. This paper reports on a research project that was concerned with the life cycle development for large scale data mining projects. The paper provides a detailed view of the design and development of a generic data mining life cycle called DMLC. The life cycle aims to support all members of data mini...

  13. Cosmological N -body simulations with generic hot dark matter

    Energy Technology Data Exchange (ETDEWEB)

    Brandbyge, Jacob; Hannestad, Steen, E-mail: jacobb@phys.au.dk, E-mail: sth@phys.au.dk [Department of Physics and Astronomy, University of Aarhus, Ny Munkegade 120, DK–8000 Aarhus C (Denmark)

    2017-10-01

    We have calculated the non-linear effects of generic fermionic and bosonic hot dark matter components in cosmological N -body simulations. For sub-eV masses, the non-linear power spectrum suppression caused by thermal free-streaming resembles the one seen for massive neutrinos, whereas for masses larger than 1 eV, the non-linear relative suppression of power is smaller than in linear theory. We furthermore find that in the non-linear regime, one can map fermionic to bosonic models by performing a simple transformation.

  14. Stability of generic thin shells in conformally flat spacetimes

    Energy Technology Data Exchange (ETDEWEB)

    Amirabi, Z. [Eastern Mediterranean Univ., Gazimagusa (Turkey). Dept. of Physics

    2017-07-15

    Some important spacetimes are conformally flat; examples are the Robertson-Walker cosmological metric, the Einstein-de Sitter spacetime, and the Levi-Civita-Bertotti-Robinson and Mannheim metrics. In this paper we construct generic thin shells in conformally flat spacetime supported by a perfect fluid with a linear equation of state, i.e., p = ωσ. It is shown that, for the physical domain of ω, i.e., 0 < ω ≤ 1, such thin shells are not dynamically stable. The stability of the timelike thin shells with the Mannheim spacetime as the outer region is also investigated. (orig.)

  15. Exploring community pharmacists' views on generic medicines: a nationwide study from Malaysia.

    Science.gov (United States)

    Chong, Chee Ping; Hassali, Mohamed Azmi; Bahari, Mohd Baidi; Shafie, Asrul Akmal

    2011-02-01

    To evaluate the Malaysian community pharmacists' views on generic medicines. A sample of 1419 Malaysian community pharmacies with resident pharmacists. A cross-sectional nationwide survey using a self-completed mailing questionnaire. Pharmacists' views on generic medicines including issues surrounding efficacy, safety, quality and bioequivalence. Responses were received from 219 pharmacies (response rate 15.4%). Only 50.2% of the surveyed pharmacists agreed that all products that are approved as generic equivalents can be considered therapeutically equivalent with the innovator medicines. Around 76% of respondents indicated that generic substitution of narrow therapeutic index medicines is inappropriate. The majority of the pharmacists understood that a generic medicine must contain the same amount of active ingredient (84.5%) and must be in the same dosage form as the innovator brand (71.7%). About 21% of respondents though that generic medicines are of inferior quality compared to innovator medicines. Most of the pharmacists (61.6%) disagreed that generic medicines produce more side-effects than innovator brand. Pharmacists graduated from Malaysian universities, twinning program and overseas universities were not differed significantly in their views on generic medicines. Additionally, the respondents appeared to have difficulty in ascertaining the bioequivalent status of the marketed generic products in Malaysia. The Malaysian pharmacists' have lack of information and/or trust in the generic manufacturing and/or approval system in Malaysia. This issue should be addressed by pharmacy educators and relevant government agencies.

  16. Factors affecting the opinions of family physicians regarding generic drugs – a questionnaire based study

    Directory of Open Access Journals (Sweden)

    Pawel Lewek

    2014-12-01

    Full Text Available A range of factors are believed to exert a negative influence on opinions of physicians about generic drugs.The aim of this study was to survey the opinions of primary care doctors on generics, and determine the factors which may affect them. A questionnaire comprising thirty eight questions was distributed among primary care doctors working in seventy out-patient clinics of the Lodzkie province, Poland, during the period of January 1, 2010 – December 31, 2010. A total of170 of 183 participants completed the survey (average age 48.5; 70.0% women: a 92.9%response rate. While 38.8% of physicians claimed that generics were worse than brand name drugs, 54.1% considered them to be better. However, 36.5% of the doctors did not choose generics for their own use. Two key opinions were identified among the responses concerning the effectiveness of generic drugs: use of generic drugs by the physician (p<0.001, and their opinion that pharmacists do inform patients about generic drugs (p<0.05. Although existing evidence confirms that generic and brand name drugs are equally effective, many physicians doubt this, which prevents them from being used as cost effective drug therapy. In order to increase healthcare savings through the use of generics, these factors should be addressed: for example, convincing a physician to adopt generics for personal use may be an efficient way to support more cost effective treatment of his patients.

  17. Seismic and dynamic qualification of safety-related electrical and mechanical equipment in operating nuclear power plants: development of a method to generate generic floor-response spectra

    International Nuclear Information System (INIS)

    Curreri, J.; Costantino, C.; Subudhi, M.; Reich, M.

    1983-09-01

    Generic floor response spectra were developed for use in the qualification of electrical and mechanical equipment in operating nuclear power plants. The characteristics of 1000 floor response spectra were studied to determine the generic spectra. The procedure developed uses as much or as little information that currently exists at the plant relating to the question of equipment qualification. The general approach was to study the effects on the dynamic characteristics of each of the elements in the chain of events that goes between the loads and the responses. This includes the loads, the soils and the structures. A free-field earthquake response spectra was used to generate horizontal earthquake time histories. The excitation was applied through the soil and into the various structures to produce responses in equipment. An entire range of soil conditions was used with each structure. Actual PWR and BWR - Mark I structural models were used. For each model, the stiffness properties were varied, with the same mass, so as to extend the fundamental base structure natural frequency from 2 cps to 36 cps. The natural frequencies of the structures were varied to obtain maximum response conditions. The actual properties were first used to locate the natural frequencies. The stiffness properties were than varied, with the same mass, to extend the range of the fundamental base structure natural frequency. The intention was to have the coupled structural material frequencies in the vicinity of the peak amplitude frequency content of the excitation spectrum. Particular attention was therefore given to the frequency band between 2 Hz and 4 Hz. A horizontal generic floor response spectra is proposed for the top level of a generic structure. Reduction factors are applied to the peak acceleration for equipment at lower levels

  18. An evaluation of consumers' knowledge, perceptions and attitudes regarding generic medicines in Auckland.

    Science.gov (United States)

    Babar, Zaheer-Ud-Din; Stewart, Joanna; Reddy, Shiwangni; Alzaher, Woroud; Vareed, Prateeka; Yacoub, Nineweh; Dhroptee, Bandhana; Rew, Anne

    2010-08-01

    The aim of this project was to evaluate the perceptions, knowledge and attitudes regarding generic medicines. A cross-sectional study, with self administered questionnaires, was conducted to survey consumers visiting pharmacies in four regions of Auckland (North Shore, Waitakere, Central Auckland and South Auckland). Through stratified random sampling, approximately 10% of pharmacies from each region were selected, which turn out to be 30 pharmacies. Every alternate customer coming to the pharmacy, who was eligible to participate in the study, was asked by the researchers to complete the questionnaire. A total of 441 questionnaires were included in the analysis. Different response rates were obtained in different regions of Auckland. Of all respondents, 51.6% had previous knowledge of generic medicines. Pharmacists were the main source of information regarding generic medicines followed by doctors and media. A higher level of education had a direct relationship with having correct knowledge of generics (P = .002). Attitude of participants toward the use of generic medicines was determined by their knowledge of generics, whether it was recommended by a pharmacist and their type of illness. Participants were more prepared to change to a generic for a minor illness (79%) than for a major illness (58.7%). Those who had better knowledge were more likely than those with poor knowledge to say they would to use a generic in major illness (P = .001) as well as minor illness (P < .0001). Previous positive experiences with generics also determined consumers' willingness to use generics. Many consumers have misconceptions regarding generic medicines. Having knowledge about generics and the advice by doctors and pharmacists are key indicators to improve the quality use of generic medicines.

  19. Load Balancing in Hypergraphs

    Science.gov (United States)

    Delgosha, Payam; Anantharam, Venkat

    2018-03-01

    Consider a simple locally finite hypergraph on a countable vertex set, where each edge represents one unit of load which should be distributed among the vertices defining the edge. An allocation of load is called balanced if load cannot be moved from a vertex to another that is carrying less load. We analyze the properties of balanced allocations of load. We extend the concept of balancedness from finite hypergraphs to their local weak limits in the sense of Benjamini and Schramm (Electron J Probab 6(23):13, 2001) and Aldous and Steele (in: Probability on discrete structures. Springer, Berlin, pp 1-72, 2004). To do this, we define a notion of unimodularity for hypergraphs which could be considered an extension of unimodularity in graphs. We give a variational formula for the balanced load distribution and, in particular, we characterize it in the special case of unimodular hypergraph Galton-Watson processes. Moreover, we prove the convergence of the maximum load under some conditions. Our work is an extension to hypergraphs of Anantharam and Salez (Ann Appl Probab 26(1):305-327, 2016), which considered load balancing in graphs, and is aimed at more comprehensively resolving conjectures of Hajek (IEEE Trans Inf Theory 36(6):1398-1414, 1990).

  20. Structural load combinations

    International Nuclear Information System (INIS)

    Hwang, H.; Reich, M.; Ellingwood, B.; Shinozuka, M.

    1985-01-01

    This paper presents the latest results of the program entitled, ''Probability Based Load Combinations For Design of Category I Structures''. In FY 85, a probability-based reliability analysis method has been developed to evaluate safety of shear wall structures. The shear walls are analyzed using stick models with beam elements and may be subjected to dead load, live load and in-plane eqrthquake. Both shear and flexure limit states are defined analytically. The limit state probabilities can be evaluated on the basis of these limit states. Utilizing the reliability analysis method mentioned above, load combinations for the design of shear wall structures have been established. The proposed design criteria are in the load and resistance factor design (LRFD) format. In this study, the resistance factors for shear and flexure and load factors for dead and live loads are preassigned, while the load factor for SSE is determined for a specified target limit state probability of 1.0 x 10 -6 or 1.0 x 10 -5 during a lifetime of 40 years. 23 refs., 9 tabs

  1. Load Induced Blindness

    Science.gov (United States)

    Macdonald, James S. P.; Lavie, Nilli

    2008-01-01

    Although the perceptual load theory of attention has stimulated a great deal of research, evidence for the role of perceptual load in determining perception has typically relied on indirect measures that infer perception from distractor effects on reaction times or neural activity (see N. Lavie, 2005, for a review). Here we varied the level of…

  2. Structural load combinations

    International Nuclear Information System (INIS)

    Hwang, H.; Reich, M.; Ellingwood, B.; Shinozuka, M.

    1986-01-01

    This paper presents the latest results of the program entitled, ''Probability Based Load Combinations For Design of Category I Structures''. In FY 85, a probability-based reliability analysis method has been developed to evaluate safety of shear wall structures. The shear walls are analyzed using stick models with beam elements and may be subjected to dead load, live load and in-plane earthquake. Both shear and flexure limit states are defined analytically. The limit state probabilities can be evaluated on the basis of these limit states. Utilizing the reliability analysis method mentioned above, load combinations for the design of shear wall structures have been established. The proposed design criteria are in the load and resistance factor design (LRFD) format. In this study, the resistance factors for shear and flexure and load factors for dead and live loads are preassigned, while the load factor for SSE is determined for a specified target limit state probability of 1.0 x 10 -6 or 1.0 x 10 -5 during a lifetime of 40 years

  3. Load event: Aircraft crash

    International Nuclear Information System (INIS)

    Fritsch, H.

    1985-01-01

    The bibliography includes 48 quotations, up to the year 1983, on the following issues: Experiments and computational methods. Design load for the dimensioning of reinforced concrete buildings and components with respect to the dynamic load in the event of an aircraft crash. (orig./HP) [de

  4. Development of the generic drug industry in the US after the Hatch-Waxman Act of 1984

    Directory of Open Access Journals (Sweden)

    Garth Boehm

    2013-09-01

    Full Text Available The key events in the development of the US generic drug industry after the Hatch-Waxman Act of 1984 are systematically reviewed, including the process of approval for generic drugs, bioequivalence issues including “switchability”, bioequivalence for complicated dosage forms, patent extension, generic drug safety, generic substitution and low-cost generics. The backlog in generic review, generic drug user fees, and “quality by design” for generic drugs is also discussed. The evolution of the US generic drug industry after the Hatch-Waxman Act in 1984 has afforded several lessons of great benefit to other countries wishing to establish or re-establish a domestic generic drug industry.

  5. Generic Bell inequalities for multipartite mulit-dimensional systems

    International Nuclear Information System (INIS)

    Son, W.; Lee, J.; Kim, M.S.

    2005-01-01

    Full text: We present generic Bell inequalities for multipartite multi-dimensional systems. They utilize the set of measurements, which are coincident with the generalized version of Greenberger, Horne and Zeilinger (GHZ) paradox. The inequalities that must be satisfied by any local realistic theories are violated by quantum mechanics for even-dimensional multipartite systems. It is also shown that the maximal violation of the inequality is obtained by the generalized GHZ state, which is true multi-body nonseparable state. As a special case for the multipartite two-dimensional systems, it can be shown that the inequality agrees with Bell-Mermin version of inequality. Large sets of variants are shown to naturally emerge from the generic Bell inequalities. We will discuss the particular variants of Bell inequalities that are violated for all the systems including odd-dimensional multipartite systems. Interestingly the variants can be reduced into the Clauser-Horne-Shimony-Holt (CHSH) inequality as well as Ardehali inequality. (author)

  6. Evolution of the Generic Lock System at Jefferson Lab

    International Nuclear Information System (INIS)

    Brian Bevins; Yves Roblin

    2003-01-01

    The Generic Lock system is a software framework that allows highly flexible feedback control of large distributed systems. It allows system operators to implement new feedback loops between arbitrary process variables quickly and with no disturbance to the underlying control system. Several different types of feedback loops are provided and more are being added. This paper describes the further evolution of the system since it was first presented at ICALEPCS 2001 and reports on two years of successful use in accelerator operations. The framework has been enhanced in several key ways. Multiple-input, multiple-output (MIMO) lock types have been added for accelerator orbit and energy stabilization. The general purpose Proportional-Integral-Derivative (PID) locks can now be tuned automatically. The generic lock server now makes use of the Proxy IOC (PIOC) developed at Jefferson Lab to allow the locks to be monitored from any EPICS Channel Access aware client. (Previously clients had to be Cdev aware.) The dependency on the Qt XML parser has been replaced with the freely available Xerces DOM parser from the Apache project

  7. Monte Carlo simulations for generic granite repository studies

    Energy Technology Data Exchange (ETDEWEB)

    Chu, Shaoping [Los Alamos National Laboratory; Lee, Joon H [SNL; Wang, Yifeng [SNL

    2010-12-08

    In a collaborative study between Los Alamos National Laboratory (LANL) and Sandia National Laboratories (SNL) for the DOE-NE Office of Fuel Cycle Technologies Used Fuel Disposition (UFD) Campaign project, we have conducted preliminary system-level analyses to support the development of a long-term strategy for geologic disposal of high-level radioactive waste. A general modeling framework consisting of a near- and a far-field submodel for a granite GDSE was developed. A representative far-field transport model for a generic granite repository was merged with an integrated systems (GoldSim) near-field model. Integrated Monte Carlo model runs with the combined near- and farfield transport models were performed, and the parameter sensitivities were evaluated for the combined system. In addition, a sub-set of radionuclides that are potentially important to repository performance were identified and evaluated for a series of model runs. The analyses were conducted with different waste inventory scenarios. Analyses were also conducted for different repository radionuelide release scenarios. While the results to date are for a generic granite repository, the work establishes the method to be used in the future to provide guidance on the development of strategy for long-term disposal of high-level radioactive waste in a granite repository.

  8. Generic Module for Collecting Data in Smart Cities

    Science.gov (United States)

    Martinez, A.; Ramirez, F.; Estrada, H.; Torres, L. A.

    2017-09-01

    The Future Internet brings new technologies to the common life of people, such as Internet of Things, Cloud Computing or Big Data. All this technologies have change the way people communicate and also the way the devices interact with the context, giving rise to new paradigms, as the case of smart cities. Currently, the mobile devices represent one of main sources of information for new applications that take into account the user context, such as apps for mobility, health, of security. Several platforms have been proposed that consider the development of Future Internet applications, however, no generic modules can be found that implement the collection of context data from smartphones. In this research work we present a generic module to collect data from different sensors of the mobile devices and also to send, in a standard manner, this data to the Open FIWARE Cloud to be stored or analyzed by software tools. The proposed module enables the human-as-a-sensor approach for FIWARE Platform.

  9. GENERIC MODULE FOR COLLECTING DATA IN SMART CITIES

    Directory of Open Access Journals (Sweden)

    A. Martinez

    2017-09-01

    Full Text Available The Future Internet brings new technologies to the common life of people, such as Internet of Things, Cloud Computing or Big Data. All this technologies have change the way people communicate and also the way the devices interact with the context, giving rise to new paradigms, as the case of smart cities. Currently, the mobile devices represent one of main sources of information for new applications that take into account the user context, such as apps for mobility, health, of security. Several platforms have been proposed that consider the development of Future Internet applications, however, no generic modules can be found that implement the collection of context data from smartphones. In this research work we present a generic module to collect data from different sensors of the mobile devices and also to send, in a standard manner, this data to the Open FIWARE Cloud to be stored or analyzed by software tools. The proposed module enables the human-as-a-sensor approach for FIWARE Platform.

  10. Scaling Limits and Generic Bounds for Exploration Processes

    Science.gov (United States)

    Bermolen, Paola; Jonckheere, Matthieu; Sanders, Jaron

    2017-12-01

    We consider exploration algorithms of the random sequential adsorption type both for homogeneous random graphs and random geometric graphs based on spatial Poisson processes. At each step, a vertex of the graph becomes active and its neighboring nodes become blocked. Given an initial number of vertices N growing to infinity, we study statistical properties of the proportion of explored (active or blocked) nodes in time using scaling limits. We obtain exact limits for homogeneous graphs and prove an explicit central limit theorem for the final proportion of active nodes, known as the jamming constant, through a diffusion approximation for the exploration process which can be described as a unidimensional process. We then focus on bounding the trajectories of such exploration processes on random geometric graphs, i.e., random sequential adsorption. As opposed to exploration processes on homogeneous random graphs, these do not allow for such a dimensional reduction. Instead we derive a fundamental relationship between the number of explored nodes and the discovered volume in the spatial process, and we obtain generic bounds for the fluid limit and jamming constant: bounds that are independent of the dimension of space and the detailed shape of the volume associated to the discovered node. Lastly, using coupling techinques, we give trajectorial interpretations of the generic bounds.

  11. THE GENERIC NAMES PROPOSED FOR HYMENOMYCETES—I "Cyphellaceae"

    Directory of Open Access Journals (Sweden)

    M. A. DONK

    2015-11-01

    Full Text Available 1. The present paper is the first of a series intended to deal from a nomenclatural point of view with all the generic names proposed for Hymenomycetes. For each name the following items are considered: (i its etymology and gender, (ii the original scope of the corresponding genus, and, in case of the name being- an isonym,also of the group covered by its basinym; (iii the type species, which when not originally designated, is selected; (iv its basinym, synisonyms, homonyms, typonyms,and variant spellings, if any, are indicated; (v its status under the Rules is determined;and (vi supplementary remarks are given when these are deemed useful.2. This first instalment deals with "Cyphellaceae," a group defined in a con-ventional, rather descriptive, manner, not as a taxonomic unit.3. A new generic name, Stromatoscypha Donk, is introduced for Porothelium(Pr. ex Fr. Fr.4. The following new combinations are made: Aleurodiscus digitalis (A. & S.ex Fr. Donk [basinym: Cyphella digitalis (A. & S. ex Fr.], and Stromatoscyphafimbriata (Pers. ex Fr. Donk [basinym: Polyporus fimbriatus (Pers. ex Fr.].

  12. Cost assessment of a generic magnetic fusion reactor

    International Nuclear Information System (INIS)

    Sheffield, J.; Dory, R.A.; Cohn, S.M.; Delene, J.G.; Parsly, L.F.; Ashby, D.E.T.F.; Reiersen, W.T.

    1986-03-01

    A generic reactor model is used to examine the economic viability of generating electricity by magnetic fusion. The simple model uses components that are representative of those used in previous reactor studies of deuterium-tritium-burning tokamaks, stellarators, bumpy tori, reversed-field pinches (RFPs), and tandem mirrors. Conservative costing assumptions are made. The generic reactor is not a tokamak; rather, it is intended to emphasize what is common to all magnetic fusion rectors. The reactor uses a superconducting toroidal coil set to produce the dominant magnetic field. To this extent, it is not as good an approximation to systems such as the RFP in which the main field is produced by a plasma current. The main output of the study is the cost of electricity as a function of the weight and size of the fusion core - blanket, shield, structure, and coils. The model shows that a 1200-MW(e) power plant with a fusion core weight of about 10,000 tonnes should be competitive in the future with fission and fossil plants. Studies of the sensitivity of the model to variations in the assumptions show that this result is not sensitively dependent on any given assumption. Of particular importance is the result that a fusion reactor of this scale may be realized with only moderate advances in physics and technology capabilities

  13. EPRI spearheads generic PM recommendations for infrastructure equipment

    International Nuclear Information System (INIS)

    Worledge, David H.; Hinchcliffe, Glenn R.; Benak, Mark S.; Bridges, Martin

    2007-01-01

    All companies have at their core a vast amount of similar equipment that would benefit from solid preventive maintenance (PM) recommendations that are generic and easily adapted to meet operational conditions. The re-emergence of PM optimization methods like Reliability Centered Maintenance, further illustrates that companies in all industries recognize the positive influence that a well-focused maintenance program has on the corporate bottom line. The Electric Power Research Institute (EPRI) has long been a leader in providing universally adaptable maintenance solutions to meet the evolving needs of its membership. Nearly ten years ago, EPRI began developing the PM Basis Database, a one-of-a-kind repository of PM recommendations for basic infrastructure components (such as pumps, motors, valves, compressors), derived from equipment experts. EPRI has now made available this comprehensive body of knowledge to all industries. This paper will explore the origins and structure of the database, how these generic PM recommendations benefit every industry, and how they may be obtained. (author)

  14. Generic Accounting and Reporting Software for Research Reactors

    International Nuclear Information System (INIS)

    Jaernry, C.

    2010-01-01

    This poster will give a general description of a generic accounting and reporting software for research reactors. The program has been designed to be a powerful working tool for the operator. The software is designed to be extremely easy to handle and at the same time give the operator the maximal power of searches, calculations and reports that a modern advanced system can produce. The systems are designed to take make the relevant accountancy for the site and perform the reporting to IAEA in Code 10. Generic software for accounting and reporting for research and other smaller facilities is something that has been asked for by many parties. Software like this could be distributed to facilities in need of a powerful accountancy and reporting system for a much lower cost than the systems that is now custom made for these facilities. This will greatly increase the quality of accountancy at these facilities and the quality of the reporting to IAEA and other state offices etc. The software is based on our advanced custom made software series 'STAR' that has been in use in many places for more than a decade with successful use. (author)

  15. GOoDA: The Generic Optimization Data Analyzer

    International Nuclear Information System (INIS)

    Calafiura, P; Vitillo, R A; Eranian, S; Levinthal, D; Kama, S

    2012-01-01

    Modern superscalar, out-of-order microprocessors dominate large scale server computing. Monitoring their activity, during program execution, has become complicated due to the complexity of the microarchitectures and their IO interactions. Recent processors have thousands of performance monitoring events. These are required to actually provide coverage for all of the complex interactions and performance issues that can occur. Knowing which data to collect and how to interpret the results has become an unreasonable burden for code developers whose tasks are already hard enough. It becomes the task of the analysis tool developer to bridge this gap. To address this issue, a generic decomposition of how a microprocessor is using the consumed cycles allows code developers to quickly understand which of the myriad of microarchitectural complexities they are battling, without requiring a detailed knowledge of the microarchitecture. When this approach is intrinsically integrated into a performance data analysis tool, it enables software developers to take advantage of the microarchitectural methodology that has only been available to experts. The Generic Optimization Data Analyzer (GOoDA) project integrates this expertise into a profiling tool in order to lower the required expertise of the user and, being designed from the ground up with large-scale object-oriented applications in mind, it will be particularly useful for large HENP codebases

  16. Using generic tool kits to build intelligent systems

    Science.gov (United States)

    Miller, David J.

    1994-01-01

    The Intelligent Systems and Robots Center at Sandia National Laboratories is developing technologies for the automation of processes associated with environmental remediation and information-driven manufacturing. These technologies, which focus on automated planning and programming and sensor-based and model-based control, are used to build intelligent systems which are able to generate plans of action, program the necessary devices, and use sensors to react to changes in the environment. By automating tasks through the use of programmable devices tied to computer models which are augmented by sensing, requirements for faster, safer, and cheaper systems are being satisfied. However, because of the need for rapid cost-effect prototyping and multi-laboratory teaming, it is also necessary to define a consistent approach to the construction of controllers for such systems. As a result, the Generic Intelligent System Controller (GISC) concept has been developed. This concept promotes the philosophy of producing generic tool kits which can be used and reused to build intelligent control systems.

  17. [Performance of Slovak hospitals as related to Porter's generic strategies].

    Science.gov (United States)

    Hlavacka, S; Bacharova, L; Rusnakova, V; Wagner, R

    2001-01-01

    Porter's generic strategies characterize organizations in terms of their competitiveness, and are related to the performance of the organization. The aim of this study was to analyze the Porter's generic strategies and their effect on performance in the context of the Slovak hospital industry. Acute care hospitals with more than 30 beds were included into the study. National institutes providing specialized service were excluded from the study. Strategy and performance were evaluated on the basis of self-reported questionnaires, completed by chief administrators of hospitals (total 76 completed questionnaires were obtained, out of 81 distributed, i.e. 94% response rate). The cluster analysis was used for the identification of strategic orientation. Performance differences across strategic groups were tested using multivariate analysis of covariance (MANCOVA). The hierarchical cluster analysis uncovered a four-group taxonomy of hospitals: the group "Focused Cost Leadership" included 33% of hospitals, the group "Stuck-in-the middle" 49%, the group "Wait and See" 13% and the group "Cost leadership" 5%. Significant differences in performance were related to the Porter's pure, or hybrid strategies, respectively. In terms of industry evolution, the Slovak hospital industry could be characterized as fragmented, having a large number of small and medium size mainly state owned hospitals, with absence of market leaders, and with high exit barriers (mainly social and political) that hold back consolidation. (Tab. 1, Ref. 35.).

  18. Performance implications of Porter's generic strategies in Slovak hospitals.

    Science.gov (United States)

    Hlavacka, S; Bacharova, L; Rusnakova, V; Wagner, R

    2001-01-01

    The aim of the study was to examine the use of Porter's generic strategies and their effect on performance in the context of the Slovak hospital industry. Using mail survey the study first identified the natural taxonomy of four strategic types of Slovak hospitals, based on their use of Porter's generic strategies in pure form and in combination. Next the study examined whether different strategic types were associated with different levels of organisational performance, while controlling for such variables as size and location, which have been argued to influence the hospital performance. The findings indicate that hospitals which follow a "stuck-in-the-middle" strategy, in general, have superior performance on all used performance measures, while hospitals that place only low emphasis on cost leadership, differentiation and focus, labelled "wait and see" in this study, perform the poorest. The study concludes that the research provided body of knowledge relevant for the Slovak hospital industry, that may be used by hospital managers in the strategy formulation process as well as by the researches in exploring the influence of different contingencies on hospitals' strategic orientation.

  19. Shortening of an existing generic online health-related quality of life instrument for dogs.

    Science.gov (United States)

    Reid, J; Wiseman-Orr, L; Scott, M

    2017-10-11

    Development, initial validation and reliability testing of a shortened version of a web-based questionnaire instrument to measure generic health-related quality of life in companion dogs, to facilitate smartphone and online use. The original 46 items were reduced using expert judgment and factor analysis. Items were removed on the basis of item loadings and communalities on factors identified through factor analysis of responses from owners of healthy and unwell dogs, intrafactor item correlations, readability of items in the UK, USA and Australia and ability of individual items to discriminate between healthy and unwell dogs. Validity was assessed through factor analysis and a field trial using a "known groups" approach. Test-retest reliability was assessed using intraclass correlation coefficients. The new instrument comprises 22 items, each of which was rated by dog owners using a 7-point Likert scale. Factor analysis revealed a structure with four health-related quality of life domains (energetic/enthusiastic, happy/content, active/comfortable, and calm/relaxed) accounting for 72% of the variability in the data compared with 64% for the original instrument. The field test involving 153 healthy and unwell dogs demonstrated good discriminative properties and high intraclass correlation coefficients. The 22-item shortened form is superior to the original instrument and can be accessed via a mobile phone app. This is likely to increase the acceptability to dog owners as a routine wellness measure in health care packages and as a therapeutic monitoring tool. © 2017 British Small Animal Veterinary Association.

  20. From LCAs to simplified models: a generic methodology applied to wind power electricity.

    Science.gov (United States)

    Padey, Pierryves; Girard, Robin; le Boulch, Denis; Blanc, Isabelle

    2013-02-05

    This study presents a generic methodology to produce simplified models able to provide a comprehensive life cycle impact assessment of energy pathways. The methodology relies on the application of global sensitivity analysis to identify key parameters explaining the impact variability of systems over their life cycle. Simplified models are built upon the identification of such key parameters. The methodology is applied to one energy pathway: onshore wind turbines of medium size considering a large sample of possible configurations representative of European conditions. Among several technological, geographical, and methodological parameters, we identified the turbine load factor and the wind turbine lifetime as the most influent parameters. Greenhouse Gas (GHG) performances have been plotted as a function of these key parameters identified. Using these curves, GHG performances of a specific wind turbine can be estimated, thus avoiding the undertaking of an extensive Life Cycle Assessment (LCA). This methodology should be useful for decisions makers, providing them a robust but simple support tool for assessing the environmental performance of energy systems.

  1. Electromagnetic analysis of ITER generic equatorial port plug designs during three plasma current disruption cases

    International Nuclear Information System (INIS)

    Guirao, J.; Rodríguez, E.; Ordieres, J.; Cabanas, M.F.; García, C.H. Rojas

    2012-01-01

    Highlights: ► Electromagnetic transient performance evaluation of the GEPP structure. ► Three different plasma current disruption cases: MD UP LIN36, VDE UP LIN36 and VDE DW LIN36 were analyzed. ► Three DSM-First Wall (FW) designs (horizontal and vertical drawers and monoblock) were compared. - Abstract: Electromagnetic phenomena due to plasma current disruptions are the cause for the main mechanical operation loads over the ITER equatorial level port plug structures. This paper presents a detailed finite element simulation and analysis of the transient electromagnetic effects of three different plasma current disruption cases over three designs of diagnostic shielding module (DSM) structure. The DSMs are contained into and supported by the generic equatorial port plug (GEPP) analyzed structure. The three plasma disruption cases studied were: major disruption upwards linear decay in 36 ms (MD UP LIN36), vertical displacements events, upwards and downwards linear decay in 36 ms (VDE UP LIN36 and VDE DW LIN36). A detailed analysis for GEPP structure and three DSM-first wall (FW) designs (horizontal and vertical drawers and monoblock) is also presented in order to extract the Eddy current distribution on these devices and thus the resultant electromagnetic forces and moments acting on them.

  2. Final design of the generic equatorial port plug structure for ITER diagnostic systems

    International Nuclear Information System (INIS)

    Udintsev, V.S.; Maquet, P.; Alexandrov, E.; Casal, N.; Cuenca, D.; Drevon, J.-M.; Feder, R.; Friconneau, J.P.; Giacomin, T.; Guirao, J.; Iglesias, S.; Josseaume, F.; Levesy, B.; Loesser, D.; Ordieres, J.; Quinn, E.; Pak, S.; Penot, C.; Pitcher, C.S.; Portalès, M.

    2015-01-01

    The Diagnostic Generic Equatorial Port Plug (GEPP) is designed to be common to all equatorial port-based diagnostic systems. It is designed to survive throughout the lifetime of ITER for 20 years, 30,000 discharges, and 3000 disruptions. The EPP structure dimensions (without Diagnostic First Walls and Diagnostic Shield Modules) are L2.9 × W1.9 × H2.4 m"3. The length of the fully integrated EPP is 3174 mm. The weight of the EPP structure is about 15 t, whereas the total weight of the integrated EPP may be up to 45 t. The EPP structure provides a flexible platform for a variety of diagnostics. The Diagnostic Shield Module assemblies, or drawers, allow a modular approach with respect to diagnostic integration and maintenance. In the nuclear phase of ITER operations, they will be remotely inserted into the EPP structure in the Hot Cell Facility. The port plug structure must also contribute to the nuclear shielding, or plugging, of the port and further contain circulated water to allow cooling during operation and heating during bake-out. The Final Design of the GEPP has been successfully passed in late 2013 and is now heading toward manufacturing. The final design of the GEPP includes interfaces, manufacturing, R&D, operation and maintenance, load cases and analysis of failure modes.

  3. Flow structure and unsteadiness in the supersonic wake of a generic space launcher

    Science.gov (United States)

    Schreyer, Anne-Marie; Stephan, Sören; Radespiel, Rolf

    2015-11-01

    At the junction between the rocket engine and the main body of a classical space launcher, a separation-dominated and highly unstable flow field develops and induces strong wall-pressure oscillations. These can excite structural vibrations detrimental to the launcher. It is desirable to minimize these effects, for which a better understanding of the flow field is required. We study the wake flow of a generic axisymmetric space-launcher model with and without propulsive jet (cold air). Experimental investigations are performed at Mach 2.9 and a Reynolds number ReD = 1 . 3 .106 based on model diameter D. The jet exits the nozzle at Mach 2.5. Velocity measurements by means of Particle Image Velocimetry and mean and unsteady wall-pressure measurements on the main-body base are performed simultaneously. Additionally, we performed hot-wire measurements at selected points in the wake. We can thus observe the evolution of the wake flow along with its spectral content. We describe the mean and turbulent flow topology and evolution of the structures in the wake flow and discuss the origin of characteristic frequencies observed in the pressure signal at the launcher base. The influence of a propulsive jet on the evolution and topology of the wake flow is discussed in detail. The German Research Foundation DFG is gratefully acknowledged for funding this research within the SFB-TR40 ``Technological foundations for the design of thermally and mechanically highly loaded components of future space transportation systems.''

  4. Modeling Zone-3 Protection with Generic Relay Models for Dynamic Contingency Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Qiuhua; Vyakaranam, Bharat GNVSR; Diao, Ruisheng; Makarov, Yuri V.; Samaan, Nader A.; Vallem, Mallikarjuna R.; Pajuelo, Eli

    2017-10-02

    This paper presents a cohesive approach for calculating and coordinating the settings of multiple zone-3 protections for dynamic contingency analysis. The zone-3 protections are represented by generic distance relay models. A two-step approach for determining zone-3 relay settings is proposed. The first step is to calculate settings, particularly, the reach, of each zone-3 relay individually by iteratively running line open-end fault short circuit analysis; the blinder is also employed and properly set to meet the industry standard under extreme loading conditions. The second step is to systematically coordinate the protection settings of the zone-3 relays. The main objective of this coordination step is to address the over-reaching issues. We have developed a tool to automate the proposed approach and generate the settings of all distance relays in a PSS/E dyr format file. The calculated zone-3 settings have been tested on a modified IEEE 300 system using a dynamic contingency analysis tool (DCAT).

  5. A summary of the conclusions of generic issue 113: Dynamic qualification and testing of large bore hydraulic snubbers

    International Nuclear Information System (INIS)

    Ware, A.G.; Nitzel, M.E.

    1993-01-01

    The Nuclear Regulatory Commission (NRC) developed Generic Issue 113, Dynamic Qualification and Testing of Large Bore Hydraulic Snubbers (LBHSs), with the objective of evaluating the reliability of LBHSs in operating commercial nuclear power plants. For the purposes of this research, LBHSs were defined as those hydraulic snubbers with rated load capacities ≥50 kips. Relatively high LBHS failure rates were common during the early 1980s; however, industry actions taken during the last several years in response to increased inspection and testing requirements have resulted in lower LBHS failure rates. To address the issue of LBHS adequacy, the NRC developed Generic Issue 113 (GI-113). This paper provides a summary of the important findings of the GI-113 research program and a discussion of the recommendations that were made in NUREG/CR-5416. Fifteen potential improvements in LBHS reliability were identified, covering the areas of design, environmental (including dynamic) qualification, functional testing, visual inspection, and personnel training. Probabilistic risk assessment studies were used to perform a cost/benefit analysis for each. There were five potential improvements in functional testing and visual inspections with low cost/benefit ratios for both existing and future nuclear plants, and an additional six potential improvements that were determined to be cost beneficial only for future plants. Further investigations of the single failure of snubbers that could damage critical components or systems were recommended in NUREG/CR-5416

  6. Predictors of generic substitution: The role of psychological, sociodemographic, and contextual factors.

    Science.gov (United States)

    Drozdowska, Aleksandra; Hermanowski, Tomasz

    2016-01-01

    Escalating pharmaceutical costs have become a global challenge for both governments and patients. Generic substitution is one way of decreasing these costs. The aim of this study was to investigate factors associated with patients' choice between generic drugs and innovator drugs. The survey was conducted in June 2013, 1000 people from across Poland were chosen as a representative population sample. The outcome (a preference for generics/a preference for innovator pharmaceuticals/no preference) was modeled by multinomial logistic regression, adjusted for several variables describing patients' sensitivity to selected generic features (price, brand, and country of origin), to third-party opinions about generics (information on generics in the mass media, opinions of health professionals (i.e. physicians, pharmacists), relatives/friends), as well as patients' personal experiences and income per household. The results supported the predictive capacity of most independent variables (except for patient sensitivity to the country of origin and to the information on generics in the mass media), denoting patients' preferences toward generic substitution. Patient sensitivity to recommendations by physicians, generic brand, and household income were the strongest predictors of the choice between generic and innovator pharmaceuticals (P brand or their physician's opinion, as well as in respondents who were sensitive to recommendations by pharmacists or attached a greater value to a past experience with generics (their own experience or that of relatives/friends). In consideration of the foregoing, awareness-raising campaigns may be recommended, supported by a variety of systemic solutions and tools to encourage generic substitution. Copyright © 2016 Elsevier Inc. All rights reserved.

  7. Generic medications for you, but brand-name medications for me.

    Science.gov (United States)

    Keenum, Amy J; Devoe, Jennifer E; Chisolm, Deena J; Wallace, Lorraine S

    2012-01-01

    Because generic medications are less expensive than brand-name medications, government and private insurers have encouraged and/or mandated the use of generics. This study aimed at evaluating perceptions about generic medications among English-speaking women of childbearing age currently enrolled in U.S. TennCare (Medicaid). We recruited a convenience sample of patients from the waiting room of a primary care/gynecology health clinic, with 80% recruitment rate among those approached. We orally administered a 25-item questionnaire to gather sociodemographic information and to assess beliefs regarding the efficacy, safety, cost, and preferences for personal use of generic medications. The average age of the women (n=172) was 28.8 ± 6.4 years, and most were white (82.0%) and currently married (58.1%). Nearly one-fifth (19.2%) had not completed high school. Most women believed that generic medications were less expensive (97.6%) and better value (60.5%) than brand-name medications, but only 45.3% preferred to take generics themselves. About a quarter (23.3%) believed that brand-name medications were more effective than generics, whereas 13.4% believed that generics caused more side effects. Few women reported that their doctor (29.7%) and/or pharmacist (35.5%) had ever talked to them about taking generics. Awareness of the benefits of generics did not equal preferences for personal use of generics among this sample of women enrolled in U.S. TennCare. Furthermore, women reported that providers-both physicians and pharmacists-infrequently discussed generic substitution with them. Copyright © 2012 Elsevier Inc. All rights reserved.

  8. Interventions promoting the acceptance and uptake of generic medicines: a narrative review of the literature.

    Science.gov (United States)

    Babar, Z U D; Kan, S W; Scahill, S

    2014-09-01

    The objective of this paper was to undertake a narrative review of the literature regarding strategies and interventions promoting the acceptance and uptake of generic medicines. A literature search was performed between November 2011 and January 2012 to identify published full text original research articles documenting interventions to promote the use of generic medicines. Keywords used were: "generic medicine", "generic drug", "intervention", "promotion", "acceptance", "uptake", "generic/therapeutic substitution" and their related root words. The electronic databases comprised of Embase (1980 - present), Google, Google Scholar, Medline (1948 - present), PubMed, Science Direct, Scopus, Springer Link and The Cochrane Library. An interpretative narrative synthesis was undertaken and emergent themes analysed and reported. Eighteen studies were included in the final analysis. There were seven main themes which including; education, financial incentives, advertising to promote generic medicines, free generic medicine trials, administrative forms and medicines use review (MUR). These themes were further classified into subthemes. Education was subdivided into consumer and physician education. Financial incentives included the influence of financial incentives on both consumers and physicians. The subthemes in the financial incentives category included the changes in co-payment for consumers, reward payment for physicians and fund-holding schemes. Advertising included the sub-themes of print media and the use of anthropomorphic images, while free generic medicines trial was made up of free vouchers for generic medicines and generic medicines sampling system. The studies have mixed results; some interventions in some settings were useful, while others were not. Not all interventions consistently improved the uptake of generic medicines. There was limited literature available and further work is required to develop a range of interventions to support the uptake of generic

  9. Factors influencing the preference for purchasing generic drugs in a Southern Brazilian city

    Directory of Open Access Journals (Sweden)

    Marília Cruz Guttier

    Full Text Available ABSTRACT OBJECTIVE The objective of this study is to identify factors associated with the preference for purchasing generic drugs in a medium-sized municipality in Southern Brazil. METHODS We have analyzed data from a population-based cross-sectional study conducted in 2012 with a sample of 2,856 adults (≥ 20 years old. The preference for purchasing generic drugs was the main outcome. The explanatory variables were the demographic and socioeconomic variables. Statistical analyses included Poisson regressions. RESULTS The preference for purchasing generic drugs was 63.2% (95%CI 61.4–64.9. The variables correlated with this preference in the fully adjusted models were: male (prevalence ratio [PR] = 1.08; 95%CI 1.03–1.14, age of 20–39 years (PR = 1.10; 95%CI 1.02–1.20, low socioeconomic status (PR = 1.15; 95%CI 1.03–1.28, and good knowledge about generic drugs (PR= 4.66; 95%CI 2.89–7.52. Among those who preferred to purchase generic drugs, 55.1% have reported accepting to replace the prescribed drug (if not a generic with the equivalent generic drug. Another correlate of the preference for purchasing generic drugs was because individuals consider their quality equivalent to reference medicines (PR = 2.15; 95%CI 1.93–2.41. CONCLUSIONS Knowledge about generic drugs was the main correlate of the preference for purchasing generic drugs. The greater the knowledge or positive perception about generic drugs, the greater is the preference to purchase them. Therefore, educational campaigns for healthcare professionals and consumers appear to be the best strategy for expanding the use of generic drugs in Brazil.

  10. Factors influencing the preference for purchasing generic drugs in a Southern Brazilian city.

    Science.gov (United States)

    Guttier, Marília Cruz; Silveira, Marysabel Pinto Telis; Luiza, Vera Lucia; Bertoldi, Andréa Dâmaso

    2017-06-26

    The objective of this study is to identify factors associated with the preference for purchasing generic drugs in a medium-sized municipality in Southern Brazil. We have analyzed data from a population-based cross-sectional study conducted in 2012 with a sample of 2,856 adults (≥ 20 years old). The preference for purchasing generic drugs was the main outcome. The explanatory variables were the demographic and socioeconomic variables. Statistical analyses included Poisson regressions. The preference for purchasing generic drugs was 63.2% (95%CI 61.4-64.9). The variables correlated with this preference in the fully adjusted models were: male (prevalence ratio [PR] = 1.08; 95%CI 1.03-1.14), age of 20-39 years (PR = 1.10; 95%CI 1.02-1.20), low socioeconomic status (PR = 1.15; 95%CI 1.03-1.28), and good knowledge about generic drugs (PR= 4.66; 95%CI 2.89-7.52). Among those who preferred to purchase generic drugs, 55.1% have reported accepting to replace the prescribed drug (if not a generic) with the equivalent generic drug. Another correlate of the preference for purchasing generic drugs was because individuals consider their quality equivalent to reference medicines (PR = 2.15; 95%CI 1.93-2.41). Knowledge about generic drugs was the main correlate of the preference for purchasing generic drugs. The greater the knowledge or positive perception about generic drugs, the greater is the preference to purchase them. Therefore, educational campaigns for healthcare professionals and consumers appear to be the best strategy for expanding the use of generic drugs in Brazil.

  11. Load Balancing Scientific Applications

    Energy Technology Data Exchange (ETDEWEB)

    Pearce, Olga Tkachyshyn [Texas A & M Univ., College Station, TX (United States)

    2014-12-01

    The largest supercomputers have millions of independent processors, and concurrency levels are rapidly increasing. For ideal efficiency, developers of the simulations that run on these machines must ensure that computational work is evenly balanced among processors. Assigning work evenly is challenging because many large modern parallel codes simulate behavior of physical systems that evolve over time, and their workloads change over time. Furthermore, the cost of imbalanced load increases with scale because most large-scale scientific simulations today use a Single Program Multiple Data (SPMD) parallel programming model, and an increasing number of processors will wait for the slowest one at the synchronization points. To address load imbalance, many large-scale parallel applications use dynamic load balance algorithms to redistribute work evenly. The research objective of this dissertation is to develop methods to decide when and how to load balance the application, and to balance it effectively and affordably. We measure and evaluate the computational load of the application, and develop strategies to decide when and how to correct the imbalance. Depending on the simulation, a fast, local load balance algorithm may be suitable, or a more sophisticated and expensive algorithm may be required. We developed a model for comparison of load balance algorithms for a specific state of the simulation that enables the selection of a balancing algorithm that will minimize overall runtime.

  12. Status of load management

    Energy Technology Data Exchange (ETDEWEB)

    Juchymenko, A

    1983-08-01

    A summary is presented of the status of load management, defined as any activity by an electric utility to affect the size and characteristics of its load. Load management is currently viewed by electric utilities as an important tool for marketing electricity in a competitive fuel situation. A major aim of the National Energy Program is to reduce Canada's dependence on oil by 1990 to 10% of the energy used by all markets. As a result, electricity may play a greater role in the supply of primary energy. Research in load management has been directed mostly towards the residential market, especially direct control of domestic hot water heaters and air conditioners. Studies conducted in Canada and the U.S. to determine user's receptiveness to direct control of loads and thermal energy storage systems indicate that these load management techniques are in most cases not acceptable to customers, who prefer voluntary reduction in demand. The potential exists in the industrial market to use load management to assist in electrifying many of the fossil fuel-fired processes at competitive energy prices. Some of the more important applications include an industrial heat pump to heat liquids to 120{degree}C, induction heating for melting and heat treating of metals, and mechanical vapor recompression equipment to produce proces steam. 21 refs., 2 figs., 2 tabs.

  13. A new generic approach for estimating the concentrations of down-the-drain chemicals at catchment and national scale

    Energy Technology Data Exchange (ETDEWEB)

    Keller, V.D.J. [Centre for Ecology and Hydrology, Hydrological Risks and Resources, Maclean Building, Crowmarsh Gifford, Wallingford OX10 8BB (United Kingdom)]. E-mail: vke@ceh.ac.uk; Rees, H.G. [Centre for Ecology and Hydrology, Hydrological Risks and Resources, Maclean Building, Crowmarsh Gifford, Wallingford OX10 8BB (United Kingdom); Fox, K.K. [University of Lancaster (United Kingdom); Whelan, M.J. [Unilever Safety and Environmental Assurance Centre, Colworth (United Kingdom)

    2007-07-15

    A new generic approach for estimating chemical concentrations in rivers at catchment and national scales is presented. Domestic chemical loads in waste water are estimated using gridded population data. River flows are estimated by combining predicted runoff with topographically derived flow direction. Regional scale exposure is characterised by two summary statistics: PEC{sub works}, the average concentration immediately downstream of emission points, and, PEC{sub area}, the catchment-average chemical concentration. The method was applied to boron at national (England and Wales) and catchment (Aire-Calder) scales. Predicted concentrations were within 50% of measured mean values in the Aire-Calder catchment and in agreement with results from the GREAT-ER model. The concentration grids generated provide a picture of the spatial distribution of expected chemical concentrations at various scales, and can be used to identify areas of potentially high risk. - A new grid-based approach to predict spatially-referenced freshwater concentrations of domestic chemicals.

  14. 76 FR 28994 - Submission for OMB Review; Comment Request; A Generic Submission for Formative Research, Pre...

    Science.gov (United States)

    2011-05-19

    ... displays a currently valid OMB control number. Proposed Collection: Title: A Generic Submission for... advocates; members of the public; health care professionals; organizational representatives. Table 1...

  15. 78 FR 69703 - 10-Day Notice of Proposed Information Collection: Generic Customer Satisfaction Surveys; Physical...

    Science.gov (United States)

    2013-11-20

    ... DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT [Docket No. FR-5683-N-102] 10-Day Notice of Proposed Information Collection: Generic Customer Satisfaction Surveys; Physical Inspection Pilot Program...

  16. Analysis of Knowledge Level and Perception on Singkawang City Community towards Generic Medicines

    Directory of Open Access Journals (Sweden)

    Forid Morison

    2015-03-01

    Full Text Available Survey data show that the use of generic medicines in Indonesia is relatively very small, which only amounted 7%. This is due to lack of knowledge and poor perceptions towards generic medicines. Knowledge level and perceptions towards generic medicines are inflenced by community characteristics and information resource regarding generic medicines. The aim of this study was to determine the association between community characteristic and information resources with knowledge level and perception towards generic medicines. This study was an analytical survey with cross-sectional descriptive approach on 142 selected respondents who were fulfi inclusion and exclusion criteria. This study was conducted in June 2014 at several randomly selected locations on Singkawang City. The study show that 76 respondents (53.5% had inadequate knowledge and 123 respondents (86.6% had a good perception towards generic medicines. There is signifiant relationship between ethnicity (p=0.000 and information resources (p=0.009 with knowledge level regarding generic medicines at signifiance level of p<0.05. Although good perceptions were noted among the respondents, widespread dissemination of information regarding generic medicines should be continued to increase generic medicines used.

  17. Pharmaceutical quality of docetaxel generics versus originator drug product: a comparative analysis.

    Science.gov (United States)

    Vial, Jérôme; Cohen, Mélanie; Sassiat, Patrick; Thiébaut, Didier

    2008-07-01

    The aim of this study was to evaluate the quality of 31 commercially available generic formulations of docetaxel purchased in 14 countries by comparing their docetaxel content, impurity levels and pH versus those of the proprietary product Taxotere (Tx). Generic formulations were purchased in 14 countries in Asia, Africa, the Middle East and Latin America. Levels of docetaxel and impurities (chromatographic peaks above 0.05%) were obtained for each sample using reverse-phase liquid chromatography with ultraviolet detection. The pH of aqueous solutions of generic docetaxel formulations and Tx was also measured. A global evaluation of quality was conducted on each product using a multicriteria desirability analysis based on standards defined by the International Conference on Harmonisation guidelines and the US Pharmacopeia paclitaxel injection monograph. Most generic formulations contained a lower than expected amount of docetaxel and/or a high level of impurities: 21 generic docetaxel formulations had an average mass of docetaxel that was generic docetaxel formulations had a total impurity content of >3.0%, almost twice the level of impurities in Tx 20 mg. In total, 33 impurities not present in Tx were detected in the generic samples. Desirability analysis demonstrated that none of the generic docetaxel formulations had composition characteristics similar to those of Tx. This study demonstrated that from an analytical point of view, 90% of the generic docetaxel formulations evaluated contained insufficient active drug, high levels of impurities or both. This has the potential to affect both efficacy and safety of the drug.

  18. A Generic Danish Distribution Grid Model for Smart Grid Technology Testing

    DEFF Research Database (Denmark)

    Cha, Seung-Tae; Wu, Qiuwei; Østergaard, Jacob

    2012-01-01

    This paper describes the development of a generic Danish distribution grid model for smart grid technology testing based on the Bornholm power system. The frequency dependent network equivalent (FDNE) method has been used in order to accurately preserve the desired properties and characteristics...... as a generic Smart Grid benchmark model for testing purposes....... by comparing the transient response of the original Bornholm power system model and the developed generic model under significant fault conditions. The results clearly show that the equivalent generic distribution grid model retains the dynamic characteristics of the original system, and can be used...

  19. Lumbriculus variegatus loading study

    Data.gov (United States)

    U.S. Environmental Protection Agency — Results from sediment bioaccumulation tests with Lumbriculus variegatus with evaluating the effects of organism loading density. This dataset is associated with the...

  20. LOADING SIMULATION PROGRAM C

    Science.gov (United States)

    LSPC is the Loading Simulation Program in C++, a watershed modeling system that includes streamlined Hydrologic Simulation Program Fortran (HSPF) algorithms for simulating hydrology, sediment, and general water quality

  1. LOADING SIMULATION PROGRAM C

    Data.gov (United States)

    U.S. Environmental Protection Agency — LSPC is the Loading Simulation Program in C++, a watershed modeling system that includes streamlined Hydrologic Simulation Program Fortran (HSPF) algorithms for...

  2. Cognitive load theory

    NARCIS (Netherlands)

    Kirschner, Paul A.; Kirschner, Femke; Paas, Fred

    2010-01-01

    Kirschner, P. A., Kirschner, F. C., & Paas, F. (2009). Cognitive load theory. In E. M. Anderman & L. H. Anderman (Eds.). Psychology of classroom learning: An encyclopedia, Volume 1, a-j (pp. 205-209). Detroit, MI: Macmillan Reference.

  3. Static Loads Test Facility

    Data.gov (United States)

    Federal Laboratory Consortium — FUNCTION: Provides the capability to perform large-scale structural loads testing on spacecraft and other structures. Results from these tests can be used to verify...

  4. Load proportional safety brake

    Science.gov (United States)

    Cacciola, M. J.

    1979-01-01

    This brake is a self-energizing mechanical friction brake and is intended for use in a rotary drive system. It incorporates a torque sensor which cuts power to the power unit on any overload condition. The brake is capable of driving against an opposing load or driving, paying-out, an aiding load in either direction of rotation. The brake also acts as a no-back device when torque is applied to the output shaft. The advantages of using this type of device are: (1) low frictional drag when driving; (2) smooth paying-out of an aiding load with no runaway danger; (3) energy absorption proportional to load; (4) no-back activates within a few degrees of output shaft rotation and resets automatically; and (5) built-in overload protection.

  5. Plug Load Data

    Data.gov (United States)

    National Aeronautics and Space Administration — We provide MATLAB binary files (.mat) and comma separated values files of data collected from a pilot study of a plug load management system that allows for the...

  6. Performance Assessment of a Generic Repository in Bedded Salt for DOE-Managed Nuclear Waste

    Science.gov (United States)

    Stein, E. R.; Sevougian, S. D.; Hammond, G. E.; Frederick, J. M.; Mariner, P. E.

    2016-12-01

    A mined repository in salt is one of the concepts under consideration for disposal of DOE-managed defense-related spent nuclear fuel (SNF) and high level waste (HLW). Bedded salt is a favorable medium for disposal of nuclear waste due to its low permeability, high thermal conductivity, and ability to self-heal. Sandia's Generic Disposal System Analysis framework is used to assess the ability of a generic repository in bedded salt to isolate radionuclides from the biosphere. The performance assessment considers multiple waste types of varying thermal load and radionuclide inventory, the engineered barrier system comprising the waste packages, backfill, and emplacement drifts, and the natural barrier system formed by a bedded salt deposit and the overlying sedimentary sequence (including an aquifer). The model simulates disposal of nearly the entire inventory of DOE-managed, defense-related SNF (excluding Naval SNF) and HLW in a half-symmetry domain containing approximately 6 million grid cells. Grid refinement captures the detail of 25,200 individual waste packages in 180 disposal panels, associated access halls, and 4 shafts connecting the land surface to the repository. Equations describing coupled heat and fluid flow and reactive transport are solved numerically with PFLOTRAN, a massively parallel flow and transport code. Simulated processes include heat conduction and convection, waste package failure, waste form dissolution, radioactive decay and ingrowth, sorption, solubility limits, advection, dispersion, and diffusion. Simulations are run to 1 million years, and radionuclide concentrations are observed within an aquifer at a point approximately 4 kilometers downgradient of the repository. The software package DAKOTA is used to sample likely ranges of input parameters including waste form dissolution rates and properties of engineered and natural materials in order to quantify uncertainty in predicted concentrations and sensitivity to input parameters. Sandia

  7. Spacecraft control center automation using the generic inferential executor (GENIE)

    Science.gov (United States)

    Hartley, Jonathan; Luczak, Ed; Stump, Doug

    1996-01-01

    The increasing requirement to dramatically reduce the cost of mission operations led to increased emphasis on automation technology. The expert system technology used at the Goddard Space Flight Center (MD) is currently being applied to the automation of spacecraft control center activities. The generic inferential executor (GENIE) is a tool which allows pass automation applications to be constructed. The pass script templates constructed encode the tasks necessary to mimic flight operations team interactions with the spacecraft during a pass. These templates can be configured with data specific to a particular pass. Animated graphical displays illustrate the progress during the pass. The first GENIE application automates passes of the solar, anomalous and magnetospheric particle explorer (SAMPEX) spacecraft.

  8. Generic Challenges and Automation Solutions in Manufacturing SMEs

    DEFF Research Database (Denmark)

    Grube Hansen, David; Malik, Ali Ahmad; Bilberg, Arne

    2017-01-01

    Evermore research is conducted on smart manufacturing, digital manufacturing and other aspects of what is expected from the fourth industrial revolution known as Industry 4.0. Most of the research of Industry 4.0 is currently a better fit for large corporations than for SMEs, which in Europe...... of the project, identifies a correlation between the challenges, age and size of the companies. The identified correlation lay ground for an Industry 4.0 light concept, targeting the identified generic challenges of companies employing 10-50 people. The solutions presented are based on cloud computing, Internet...... however represent 98% of the manufacturing industry. In general, SMEs produce high-mix low-volume products, which require a high degree of flexibility. Historically flexibility and automation have been contradictory, but as automation becomes smarter, digitalized and less expensive, this may change which...

  9. Quantum process estimation via generic two-body correlations

    International Nuclear Information System (INIS)

    Mohseni, M.; Rezakhani, A. T.; Barreiro, J. T.; Kwiat, P. G.; Aspuru-Guzik, A.

    2010-01-01

    Performance of quantum process estimation is naturally limited by fundamental, random, and systematic imperfections of preparations and measurements. These imperfections may lead to considerable errors in the process reconstruction because standard data-analysis techniques usually presume ideal devices. Here, by utilizing generic auxiliary quantum or classical correlations, we provide a framework for the estimation of quantum dynamics via a single measurement apparatus. By construction, this approach can be applied to quantum tomography schemes with calibrated faulty-state generators and analyzers. Specifically, we present a generalization of the work begun by M. Mohseni and D. A. Lidar [Phys. Rev. Lett. 97, 170501 (2006)] with an imperfect Bell-state analyzer. We demonstrate that for several physically relevant noisy preparations and measurements, classical correlations and a small data-processing overhead suffice to accomplish the full system identification. Furthermore, we provide the optimal input states whereby the error amplification due to inversion of the measurement data is minimal.

  10. Radiation analysis for a generic centralized interim storage facility

    International Nuclear Information System (INIS)

    Gillespie, S.G.; Lopez, P.; Eble, R.G.

    1997-01-01

    This paper documents the radiation analysis performed for the storage area of a generic Centralized Interim Storage Facility (CISF) for commercial spent nuclear fuel (SNF). The purpose of the analysis is to establish the CISF Protected Area and Restricted Area boundaries by modeling a representative SNF storage array, calculating the radiation dose at selected locations outside the storage area, and comparing the results with regulatory radiation dose limits. The particular challenge for this analysis is to adequately model a large (6000 cask) storage array with a reasonable amount of analysis time and effort. Previous analyses of SNF storage systems for Independent Spent Fuel Storage Installations at nuclear plant sites (for example in References 5.1 and 5.2) had only considered small arrays of storage casks. For such analyses, the dose contribution from each storage cask can be modeled individually. Since the large number of casks in the CISF storage array make such an approach unrealistic, a simplified model is required

  11. Generic Business Model Types for Enterprise Mashup Intermediaries

    Science.gov (United States)

    Hoyer, Volker; Stanoevska-Slabeva, Katarina

    The huge demand for situational and ad-hoc applications desired by the mass of business end users led to a new kind of Web applications, well-known as Enterprise Mashups. Users with no or limited programming skills are empowered to leverage in a collaborative manner existing Mashup components by combining and reusing company internal and external resources within minutes to new value added applications. Thereby, Enterprise Mashup environments interact as intermediaries to match the supply of providers and demand of consumers. By following the design science approach, we propose an interaction phase model artefact based on market transaction phases to structure required intermediary features. By means of five case studies, we demonstrate the application of the designed model and identify three generic business model types for Enterprise Mashups intermediaries (directory, broker, and marketplace). So far, intermediaries following a real marketplace business model don’t exist in context of Enterprise Mashups and require further research for this emerging paradigm.

  12. Generic distortion model for metrology under optical microscopes

    Science.gov (United States)

    Liu, Xingjian; Li, Zhongwei; Zhong, Kai; Chao, YuhJin; Miraldo, Pedro; Shi, Yusheng

    2018-04-01

    For metrology under optical microscopes, lens distortion is the dominant source of error. Previous distortion models and correction methods mostly rely on the assumption that parametric distortion models require a priori knowledge of the microscopes' lens systems. However, because of the numerous optical elements in a microscope, distortions can be hardly represented by a simple parametric model. In this paper, a generic distortion model considering both symmetric and asymmetric distortions is developed. Such a model is obtained by using radial basis functions (RBFs) to interpolate the radius and distortion values of symmetric distortions (image coordinates and distortion rays for asymmetric distortions). An accurate and easy to implement distortion correction method is presented. With the proposed approach, quantitative measurement with better accuracy can be achieved, such as in Digital Image Correlation for deformation measurement when used with an optical microscope. The proposed technique is verified by both synthetic and real data experiments.

  13. Generic vortex modelling for horizontal-axis wind turbines

    Energy Technology Data Exchange (ETDEWEB)

    Wood, D.H.

    2002-07-01

    This paper describes a generic free-wake calculation of wind turbine wakes. The expanding, helical, tip vortices are represented by a sequence of straight segments, the blades are modelled as lines of constant bound vorticity, and the hub vortices lie along the axis of rotation. It is shown that this model is consistent with the one-dimensional analysis that leads to the Lanchester-Betz limit, in that the velocity in the far-wake is uniform with radius. Particular attention is paid to turbines operating above the Lanchester-Betz limit. It is shown that the usual relationship between the velocity through the blades and in the far-wake breaks down when there is significant wake expansion, and an empirical modification to that relation is presented. For highly expanding wakes, the dynamics of the turbine depend sensitively on the behaviour of the tip vortices. (author)

  14. Complexity of generic biochemical circuits: topology versus strength of interactions

    Science.gov (United States)

    Tikhonov, Mikhail; Bialek, William

    2016-12-01

    The historical focus on network topology as a determinant of biological function is still largely maintained today, illustrated by the rise of structure-only approaches to network analysis. However, biochemical circuits and genetic regulatory networks are defined both by their topology and by a multitude of continuously adjustable parameters, such as the strength of interactions between nodes, also recognized as important. Here we present a class of simple perceptron-based Boolean models within which comparing the relative importance of topology versus interaction strengths becomes a quantitatively well-posed problem. We quantify the intuition that for generic networks, optimization of interaction strengths is a crucial ingredient of achieving high complexity, defined here as the number of fixed points the network can accommodate. We propose a new methodology for characterizing the relative role of parameter optimization for topologies of a given class.

  15. Persistence-Driven Durotaxis: Generic, Directed Motility in Rigidity Gradients

    Science.gov (United States)

    Novikova, Elizaveta A.; Raab, Matthew; Discher, Dennis E.; Storm, Cornelis

    2017-02-01

    Cells move differently on substrates with different rigidities: the persistence time of their motion is higher on stiffer substrates. We show that this behavior—in and of itself—results in a net flux of cells directed up a soft-to-stiff gradient. Using simple random walk models with varying persistence and stochastic simulations, we characterize the propensity to move in terms of the durotactic index also measured in experiments. A one-dimensional model captures the essential features and highlights the competition between diffusive spreading and linear, wavelike propagation. Persistence-driven durokinesis is generic and may be of use in the design of instructive environments for cells and other motile, mechanosensitive objects.

  16. Control Design for a Generic Commercial Aircraft Engine

    Science.gov (United States)

    Csank, Jeffrey; May, Ryan D.

    2010-01-01

    This paper describes the control algorithms and control design process for a generic commercial aircraft engine simulation of a 40,000 lb thrust class, two spool, high bypass ratio turbofan engine. The aircraft engine is a complex nonlinear system designed to operate over an extreme range of environmental conditions, at temperatures from approximately -60 to 120+ F, and at altitudes from below sea level to 40,000 ft, posing multiple control design constraints. The objective of this paper is to provide the reader an overview of the control design process, design considerations, and justifications as to why the particular architecture and limits have been chosen. The controller architecture contains a gain-scheduled Proportional Integral controller along with logic to protect the aircraft engine from exceeding any limits. Simulation results illustrate that the closed loop system meets the Federal Aviation Administration s thrust response requirements

  17. Chaos in generically coupled phase oscillator networks with nonpairwise interactions

    Energy Technology Data Exchange (ETDEWEB)

    Bick, Christian; Ashwin, Peter; Rodrigues, Ana [Centre for Systems, Dynamics and Control and Department of Mathematics, University of Exeter, Exeter EX4 4QF (United Kingdom)

    2016-09-15

    The Kuramoto–Sakaguchi system of coupled phase oscillators, where interaction between oscillators is determined by a single harmonic of phase differences of pairs of oscillators, has very simple emergent dynamics in the case of identical oscillators that are globally coupled: there is a variational structure that means the only attractors are full synchrony (in-phase) or splay phase (rotating wave/full asynchrony) oscillations and the bifurcation between these states is highly degenerate. Here we show that nonpairwise coupling—including three and four-way interactions of the oscillator phases—that appears generically at the next order in normal-form based calculations can give rise to complex emergent dynamics in symmetric phase oscillator networks. In particular, we show that chaos can appear in the smallest possible dimension of four coupled phase oscillators for a range of parameter values.

  18. Generic features of Einstein-Aether black holes

    International Nuclear Information System (INIS)

    Tamaki, Takashi; Miyamoto, Umpei

    2008-01-01

    We reconsider spherically symmetric black hole solutions in Einstein-Aether theory with the condition that this theory has identical parametrized post-Newtonian parameters as those for general relativity, which is the main difference from the previous research. In contrast with previous study, we allow superluminal propagation of a spin-0 Aether-gravity wave mode. As a result, we obtain black holes having a spin-0 'horizon' inside an event horizon. We allow a singularity at a spin-0 horizon since it is concealed by the event horizon. If we allow such a configuration, the kinetic term of the Aether field can be large enough for black holes to be significantly different from Schwarzschild black holes with respect to Arnowitt-Deser-Misner mass, innermost stable circular orbit, Hawking temperature, and so on. We also discuss whether or not the above features can be seen in more generic vector-tensor theories

  19. Generic testability and test methods guidelines for ASIC devices

    International Nuclear Information System (INIS)

    Puri, K.; Takeda, H.

    1996-04-01

    Many industries are switching from analog equipment to digital equipment. This change has become desirable because digital devices have become cost-effective, easily available, highly reliable, easy to qualify and easy to test and replace when needed. The nuclear power industry is beginning to upgrade some of its instrumentation and control equipment from an analog design to digital design. A digital application specific integrated circuit (ASIC) device can be designed to perform the same functions as performed by analog modules. However, the ASIC must be designed for cost-effective testability and qualification. This report provides generic guidelines for designing cost-effective methods for testing and characterizing ASIC devices to accomplish qualification

  20. Generic waste management concepts for six LWR fuel cycles

    International Nuclear Information System (INIS)

    DePue, J.D.

    1979-04-01

    This report supplements the treatment of waste management issues provided in the Generic Environmental Statement on the use of recycle plutonium in mixed oxide fuel in light water cooled reactors (GESMO, NUREG-0002). Three recycle and three no-recycle options are described in this document. Management of the radioactive wastes that would result from implementation of either type of fuel cycle alternative is discussed. For five of the six options, wastes would be placed in deep geologic salt repositories for which thermal criteria are considered. Radiation doses to the workers at the repositories and to the general population are discussed. The report also covers the waste management schedule, the land and salt commitments, and the economic costs for the management of wastes generated