The impact of dry-land sprint start training on the short track speed skating start.

Science.gov (United States)

Haug, William B; Drinkwater, Eric J; Cicero, Nicholas J; Barthell, J Anthony; Chapman, Dale W

2017-05-05

This investigation sought to determine the effects of dry-land sprint start training on short track speed skating (STSS) start performance. Nine highly trained short track athletes completed a control period of normal STSS training followed by a four-week training intervention. Before and after the control and intervention periods, athletes performed three electronically timed dry-land and on-ice 14.43 m maximal sprint start efforts. The intervention consisted of two sprint sessions per week consisting of nine electronically timed 14.43 m dry-land sprint starts in addition to normal STSS training. The control period resulted in no substantial change in on-ice start performance (Mean Δ: -0.01 s, 95% Confidence Limits (CL): -0.08 to 0.05 s; Effect Size (ES): -0.05; Trivial) however, a small change was observed in dry-land start performance (Mean Δ: -0.07 s, 95% CL: -0.13 to -0.02 s; ES: -0.49). Following brief specific dry-land sprint start training a small improvement was observed in both on-ice (Mean Δ: -0.07 s, 95% CL: -0.13 to -0.01 s; ES: -0.33) and dry-land (Mean Δ: -0.04 s, 95% CL: -0.09 to 0.00 s; ES: -0.29) start performance. This investigation suggests STSS start performance can be improved through a brief dry-land sprint start training program.

Preparations for the start-up of a research program in nuclear safeguards at Chalmers - Stage 2

Energy Technology Data Exchange (ETDEWEB)

Kitamura, Yasunori; Pazsit, Imre

2004-12-01

This report gives an account of the work performed at the Dept. of Reactor Physics at Chalmers Univ. of Technology in the second stage of the preparations for the start-up of a research program in nuclear safeguards and nuclear material management. The program is aimed at utilizing the experimental facilities as well as the experience in reactor physics, criticality safety, signal processing and unfolding, and experimental nuclear techniques, in tackling problems in non-destructive assay (NDA) of nuclear materials. During the present project, the following three main subjects were dealt with: first tests and pilot measurements were performed with one of the two newly acquired {sup 252}Cf detectors that were obtained from JNC Japan; the second exercise of the ESARDA benchmark. which consisted of the evaluation of the pulse train generated by Los Alamos Laboratory for multiplicity counting was performed and reported to the organisers of the benchmark; the modified Monte-Carlo code MCNP-PoliMi was installed, tested and work started for generating (although outside the ESARDA benchmark), pulse train data as obtained from various neutron sources with or without the presence of fissile material, as detected with an Active Well Coincidence Counter.

Preparations for the start-up of a research program in nuclear safeguards at Chalmers - Stage 2

International Nuclear Information System (INIS)

Kitamura, Yasunori; Pazsit, Imre

2004-12-01

This report gives an account of the work performed at the Dept. of Reactor Physics at Chalmers Univ. of Technology in the second stage of the preparations for the start-up of a research program in nuclear safeguards and nuclear material management. The program is aimed at utilizing the experimental facilities as well as the experience in reactor physics, criticality safety, signal processing and unfolding, and experimental nuclear techniques, in tackling problems in non-destructive assay (NDA) of nuclear materials. During the present project, the following three main subjects were dealt with: first tests and pilot measurements were performed with one of the two newly acquired 252 Cf detectors that were obtained from JNC Japan; the second exercise of the ESARDA benchmark. which consisted of the evaluation of the pulse train generated by Los Alamos Laboratory for multiplicity counting was performed and reported to the organisers of the benchmark; the modified Monte-Carlo code MCNP-PoliMi was installed, tested and work started for generating (although outside the ESARDA benchmark), pulse train data as obtained from various neutron sources with or without the presence of fissile material, as detected with an Active Well Coincidence Counter

Bootstrap finance: the art of start-ups.

Science.gov (United States)

Bhide, A

1992-01-01

Entrepreneurship is more popular than ever: courses are full, policymakers emphasize new ventures, managers yearn to go off on their own. Would-be founders often misplace their energies, however. Believing in a "big money" model of entrepreneurship, they spend a lot of time trying to attract investors instead of using wits and hustle to get their ideas off the ground. A study of 100 of the 1989 Inc. "500" list of fastest growing U.S. start-ups attests to the value of bootstrapping. In fact, what it takes to start a business often conflicts with what venture capitalists require. Investors prefer solid plans, well-defined markets, and track records. Entrepreneurs are heavy on energy and enthusiasm but may be short on credentials. They thrive in rapidly changing environments where uncertain prospects may scare off established companies. Rolling with the punches is often more important than formal plans. Striving to adhere to investors' criteria can diminish the flexibility--the try-it, fix-it approach--an entrepreneur needs to make a new venture work. Seven principles are basic for successful start-ups: get operational fast; look for quick break-even, cash-generating projects; offer high-value products or services that can sustain direct personal selling; don't try to hire the crack team; keep growth in check; focus on cash; and cultivate banks early. Growth and change are the start-up's natural environment. But change is also the reward for success: just as ventures grow, their founders usually have to take a fresh look at everything again: roles, organization, even the very policies that got the business up and running.

Participation in testing and start up operations

International Nuclear Information System (INIS)

Prasad, Y.S.R.

1977-01-01

Testing and start up operations of a nuclear power plant require careful planning. A detailed program of tests and the responsibility of implementing them is discussed. Requirement of documentation covering the tests and operating procedures is explained. The performance of the system during normal and abnomal operating conditions is analysed and required are modifications carried out. Various phases of commissioning and their significance are explained. Preparation of maintenance documentation and training of operating and maintenance staff during this period are discussed. Necessity of close liaison between the regulatory body and the operating organization is explained. (orig.) [de

Optimization of treaining process in pre-start fencing training on the base of out-of-training means’ of mobilization orientation application

Directory of Open Access Journals (Sweden)

G.O. Lopatenko

2016-04-01

Full Text Available Purpose: to show effectiveness of out-of- training means of mobilization orientation in pre-start preparation of elite fencers. Material: in the research 12 elite sportsmen-fencers participated. Results: it was found that under influence of the worked out pre-start complex (during 15-18 minutes, comparing with traditional warming up (40 minutes more expressed mobilization effect was registered. This effect also lasted longer time. Higher stimulating effects of pre-start complex are proved by confident differences in sportsmen’s special workability (p -0.05. Conclusions: the achieved stimulating effects reduced duration of general warming up to twenty minutes. It permits to more rationally organize pre-start training of fencers in comparison with application of traditional means.

Lean Start-up in Established Companies

DEFF Research Database (Denmark)

Goduscheit, René Chester

2018-01-01

Lean start-up is an emergent perspective on how entrepreneurs can bring new products and services to the market. This approach challenges the dominant role of lengthy business plans, linear product development processes, and seeking complete overview of the potential of the new products....../services before market launch. Instead it suggests that start-ups could benefit from a ‘minimum-viable product’ approach where products and services are launched when they contain critical features. The emphasis in the lean start-up approach is on business models rather than the elaborate business plan...... at the companies (strategy meetings, development workshops etc.). The aim is to shed light on the implications for companies that seek to employ lean start-up. These implications will be aimed at aspects like innovation management, organizational structure, customer relations etc....

Dampak Mentoring Pada Keberhasilan Start-Up Business: Studi Kasus Pada Start-Up Business di Indonesia [Mentoring the Impact of Success of a Start-Up Business: A Case Study of a Start-Up Business in Indonesia

Directory of Open Access Journals (Sweden)

Christina Yanita Setyawati

2016-10-01

Full Text Available Entrepreneurship is a highly developed science today, as well as in the world of education in Indonesia. Teaching entrepreneurship at the university level, especially at some universities in Surabaya, the second largest city in Indonesia, shows the positive impact that there were 74.03% of start-up businesses that survived and thrived in 2014. Based on the previous observation, some business start-ups are accompanied by a mentor. Mentoring is a process of forming and maintaining lasting relationships that develop intensively among seniors with juniors. The mentoring function includes career and psychosocial functions. The main purpose of this research is to study the relationship between mentoring and the success of a start-up business. This study is a quantitative descriptive study using a random sampling method to obtain 100 samples. The tool used to collect data was a questionnaire. The methodology used to analyze the quantitative description to test the hypothesis. The results of this study indicate that mentoring influences the success of a start-up business that was owned by university students in Surabaya, Indonesia by 32% and 78% was influenced by other variables.

A review of start-up operations on the first units of the 1300 MWe generation

International Nuclear Information System (INIS)

Meclot, B.; Lemagny Boc Lonlaygue, C.; Lavogiez, M.

1986-01-01

This paper describes and offers comments on the different phases of start-up on power stations of the P4 series. Then, one reviews incidents which occurred in the course of these start-up phases and, having highlighted the lessons to be learnt from the commissioning of these power stations, goes on to make a comparative study of 1300 and 900 MWe availability in the initial year of operation [fr

ECRH-assisted start-up in ITER

International Nuclear Information System (INIS)

Lloyd, B.; Carolan, P.G.; Warrick, C.D.

1996-07-01

In ITER, the electric field applied for ionisation and to ramp up the plasma current may be limited to ∼ 0.3 V/m. In this case, based on established theories of the avalanche process, it is shown that ohmic breakdown in ITER is only possible over a narrow range of pressure and magnetic error field. Therefore, ECRH may be necessary to provide robust and reliable start-up. ECRH can ensure prompt breakdown over a wide range of prefill pressure and error field and can also give control over the initial time and location of breakdown. For ECRH-assisted start-up in ITER, the power and pulse length requirements are essentially determined by the need to ensure burnthrough, i.e. complete ionisation of hydrogen and the transition to high ionisation states of impurities. A 0-D code (with inclusion of some 1-D effects) has been developed to analyse burnthrough in ITER. The 0-D simulations indicate that control of the deuterium density is the key factor for ensuring successful start-up in ITER, where the effects of neutral screening and dynamic fuelling by the ex-plasma volume are also crucial. It is concluded that without ECRH, successful start-up will only be possible over a very restricted range of parameters but 3MW of absorbed ECRH power will ensure reasonably robust start-up for a broad range of conditions with beryllium impurity. In the case of carbon impurity, even with an absorbed ECRH power of 5MW one may be restricted to low prefill pressure and/or low carbon concentration for successful start-up. (Author)

The physics of tokamak start-up

International Nuclear Information System (INIS)

Mueller, D.

2013-01-01

Tokamak start-up on present-day devices usually relies on inductively induced voltage from a central solenoid. In some cases, inductive startup is assisted with auxiliary power from electron cyclotron radio frequency heating. International Thermonuclear Experimental Reactor, the National Spherical Torus Experiment Upgrade and JT60, now under construction, will make use of the understanding gained from present-day devices to ensure successful start-up. Design of a spherical tokamak (ST) with DT capability for nuclear component testing would require an alternative to a central solenoid because the small central column in an ST has insufficient space to provide shielding for the insulators in the solenoid. Alternative start-up techniques such as induction using outer poloidal field coils, electron Bernstein wave start-up, coaxial helicity injection, and point source helicity injection have been used with success, but require demonstration of scaling to higher plasma current

University Start-ups: A Better Business Model

Science.gov (United States)

Dehn, J.; Webley, P. W.

2015-12-01

Many universities look to start-up companies as a way to attract faculty, supporting research and students as traditional federal sources become harder to come by. University affiliated start-up companies can apply for a broader suite of grants, as well as market their services to a broad customer base. Often university administrators see this as a potential panacea, but national statistics show this is not the case. Rarely do universities profit significantly from their start-ups. With a success rates of around 20%, most start-ups end up costing the university money as well as faculty-time. For the faculty, assuming they want to continue in academia, a start-up is often unattractive because it commonly leads out of academia. Running a successful business as well as maintaining a strong teaching and research load is almost impossible to do at the same time. Most business models and business professionals work outside of academia, and the models taught in business schools do not merge well in a university environment. To mitigate this a new business model is proposed where university start-ups are aligned with the academic and research missions of the university. A university start-up must work within the university, directly support research and students, and the work done maintaining the business be recognized as part of the faculty member's university obligations. This requires a complex conflict of interest management plan and for the companies to be non-profit in order to not jeopardize the university's status. This approach may not work well for all universities, but would be ideal for many to conserve resources and ensure a harmonious relationship with their start-ups and faculty.

University Knowledge Spillovers & Regional Start-up Rates

DEFF Research Database (Denmark)

Hellerstedt, Karin; Wennberg, Karl; Frederiksen, Lars

2014-01-01

how characteristics of the economic and political milieu within each region influence the ratio of firm births. We find that knowledge spillovers from universities and firm-based R&D strongly affect the start-up rates for both high-tech firms and knowledge-intensive services firms. Further, the start......This chapter investigates how regional start-up rates in the knowledge-intensive services and high-tech industries are influenced by knowledge spillovers from both universities and firm-based R&D activities. Integrating insights from economic geography and organizational ecology into the literature......-up rate of knowledge-intensive service firms is tied more strongly to the supply of university educated individuals and the political regulatory regime within the municipality than start-ups in high-tech industries. This suggests that knowledge-intensive service-start-ups are more susceptible to both...

Dampak Mentoring Pada Keberhasilan Start-Up Business: Studi Kasus Pada Start-Up Business di Indonesia [Mentoring the Impact of Success of a Start-Up Business: A Case Study of a Start-Up Business in Indonesia

OpenAIRE

Christina Yanita Setyawati

2016-01-01

Entrepreneurship is a highly developed science today, as well as in the world of education in Indonesia. Teaching entrepreneurship at the university level, especially at some universities in Surabaya, the second largest city in Indonesia, shows the positive impact that there were 74.03% of start-up businesses that survived and thrived in 2014. Based on the previous observation, some business start-ups are accompanied by a mentor. Mentoring is a process of forming and maintaining lasting relat...

Start-up and ramp-up of the PLT tokamak by lower hybrid waves

International Nuclear Information System (INIS)

Jobes, F.C.; Bernabei, S.; Chu, T.K.

1985-08-01

Lower hybrid waves have been used on the PLT tokamak both to start the plasma current and to ramp it up from pre-existing levels. The waves, at 800 MHz, were launched from a 6-waveguide grill. The phasing between adjacent guides could be selected electronically, and thus the launched spectrum could be set and changed at will. For start-up, the waveguide phase difference was initially set at 0 0 in order to create a plasma, then switched to 90 0 to drive the current. Over 100 kA of plasma current, at a density of 0.5 to 1 x 10 12 cm -3 , was generated in this manner. Ramp-up experiments were performed under a wide variety of conditions. The most efficient ramp-up was found at the lowest plasma densities and with the fastest launched spectrum (n/sub e/ approx. 2 x 10 12 cm -3 , N/sub parallel/ approx. 1.6 peak); approx.20% of the launched RF power was converted to (increased) poloidal field energy. All of the ramp-up results are in excellent agreement with a theory which determines the efficiency of ramp-up from the consideration of the relative energy losses of the superthermal current-carrying electrons to collisions and to the opposing inductive E-field

Start-up analysis for marketing strategy.

Science.gov (United States)

Griffith, M J; Baloff, N

1984-01-01

The complex start-up effect on utilization of health care services is too often overlooked or underestimated by marketing planners, leading to a range of negative consequences for both the users of services and the provider organization. Start-up analysis allows accurate estimation of these utilization effects for coordinated strategic planning among marketing finance, and operations.

Psychological aspects met in the start-up stage of entrepreneurial activity

Directory of Open Access Journals (Sweden)

Robert Gabriel DRAGOMIR

2012-06-01

Full Text Available The present paper proposes to focus on the important psychological characteristics implied in the activity of start-up a business. At the beginning, we present the definition and the specific points of an entrepreneur and also of an entrepreneurial activity. Then we restrict the sphere to the psychological aspects connected to the start-up business activity: the courage, the self trust, the independence attitude, the intuition, the professional training and the environment knowledge, the ability of adapting, the great availability for work, the perseverance, good organiser, a good communicator, respect for the collaborators, positive thinking, socially active. In the end, we jump at the conclusions and talked about the importance and the roles of the projects financed by the European Union, the Romanian Government, the Social European Fund and Structural Instruments.

HOW INNOVATION ENCOURAGES SELF EFFICACY TO SUPPORT BUSINESS START UP SUCCESS?

Directory of Open Access Journals (Sweden)

Srinathasya Br Sitepu

2017-07-01

Full Text Available A business start up is identical to a new business run by an entrepeneur to gain profit. The research is to analyze the function of the entrepreneurship training given by Universitas Ciputra Surabaya to the villagers in Desa Mojowarno.  The objectives of the research are: 1 to learn the proper innovation technique to increase the self efficacy of the entrepreneur/participant, 2 to understand the impact of the increased self-efficacy towards the business continuity managed by the entrepreneur/participant. The research method used is qualitative descriptive analysis with the subject of the research are entrepreneurs (ten training participants who managed banana trunk chips in Mojowarno. The validation technique used in this research is triangulation data method with participative observation, in depth interview and documentation (photo and video of the participants’ capability. The result of the research: 1 Innovation realization (5+1 concept succeeded in increasing the self efficacy of the participants (ten training participants; 2 The self-efficacy increase provides a positive impact (business increase so that the entrepreneur has an additional income. It is suggested that the entrepreneur must keep on innovating innovated to increase their self-efficacy so that the business can improve the continuity.Keywords: descriptive qualitative, innovation, self-efficacy, business entrepreneur start up, trainingABSTRAKStart-up bisnis identik dengan usaha baru yang dijalankan oleh seorang entrepreneur untuk mendapatkan keuntungan. Penelitian ini menganalisis peran pelatihan kewirausahaan yang diberikan Universitas Ciputra Surabaya kepada masyarakat Desa Mojowarno. Tujuan penelitian ini terdiri dari: 1 mengetahui teknik yang tepat untuk berinovasi guna meningkatkan self-efficacy dari entrepreneur/peseta yang mengikuti pelatihan, 2 Mengetahui dampak dari peningkatan self-efficacy terhadap keberlangsungan bisnis yang dijalankan oleh entrepreneur

Experience in the Kola NPP start-up works

International Nuclear Information System (INIS)

Zakharov, S.I.; Omel'chuk, V.V.; Bodrukhin, Yu.M.

1984-01-01

Main stages and peculiar features of maintenance and start-up works at WWER-440 type reactor NPPs described. Remarks revealed during complex equipment testing, physical and power start-up will be useful for arrangement of maintenance and start-up works at newly built NPPs

Start-up of commercial high level waste vitrification facilities at La Hague

International Nuclear Information System (INIS)

Sombret, C.; Jouan, A.; Fournier, W.; Alexandre, D.; Leroy, L.

1991-01-01

The paper describes industial experience gained in France for vitrification of fission products generated by spent fuel reprocessing. The continuous vitrification process developed by CEA, SGN and COGEMA is outlined and Marcoule Vitrification Facility (AVM), with output results since start-up of hot operation in June 1978, briefly presented. Vitrification of high-level liquid waste has now entered an industrial phase at La Hague with R7 and T7 facilities. R7 and T7 have each been designed to process FP solutions generated by reprocessing LWR fuel with an initial enrichment of 3.5% and a discharge burn-up of 33,000 MWd/t. R7 active operations began on June, 1989. This facility is now vitrifying the backlog of fission products resulting from the existing UP2 reprocessing plant, which is being currently extended. Scheduled to start early in 1992, T7 will vitrify the fission products, dissolution fines and sodium-rich solutions issuing from UP3 plant

Predicting start-up success with machine learning

OpenAIRE

Bento, Francisco Ramadas da Silva Ribeiro

2018-01-01

Start-ups are becoming the motor that moves our economy. Google, Apple, or more recently Airbnb and Uber are companies with tremendous impact in worldwide economy, social interactions and government. Over the past decade, both in the US and Europe, there has been an exponential growth in start-up formation. Thus, it seems a relevant challenge understanding what makes this type of high-risk ventures successful and as such, attractive to investors and entrepreneurs. Success for a start-up is de...

Computer-generated direct perception displays for supporting PWR feedwater system start-up and fault management: a proof-of-principle in design

International Nuclear Information System (INIS)

Reising, D.V.C.; Jones, B.G.; Shaheen, S.; Moray, N.; Sanderson, P.M.; Rasmussen, J.

1998-01-01

Traditional Single-Sensor, Single-Indicator displays are poorly matched to the cognitive abilities of operators, especially for large and complex systems. It is difficult for operators to monitor very large arrays of displays and controls as well as to integrate the data displayed into the meaningful information needed to complete tasks. Research over the last decade on interface design has suggested that computer generated graphical or 'configural' displays are better designed to support these complex tasks. Moreover, a theoretical framework for designing such graphical interfaces known as Ecological Interface Design is becoming more widely accepted as the basis for designing control interfaces for continuous process control systems. If the start-up sequence of a plant can be thought of as constructing that plant from its components, then the level at which operators think about the plant becomes progressively more global and abstract during the start-up procedure. As operators construct the plant, they climb the 'abstraction hierarchy' in terms of their cognitive reasoning. Standard operating procedures (SOPs) do not support this intellectual effort or change of strategy for thinking more globally about the plant. SOPs run to many hundreds of pages, are difficult to use, and require multiple operators. The manuals do not in themselves provide indications that steps have been omitted, performed in the wrong order, performed at the wrong time, or that inappropriate actions have been performed - nor do they indicate what appropriate steps have been completed. A graphical interface is proposed which should enforce the correct sequence of behaviors, prevent incorrect sequences, and provide constant feedback as to the state of the plant as well as the location of the operator actions in the overall start-up sequence. More generally, we believe that such an approach can support normal operations and recovery from fault conditions, but, as shall be discussed, there are

Start-up Costs, Taxes and Innovative Entrepreneurship

NARCIS (Netherlands)

P. Darnihamedani (Pourya); J.H. Block (Jörn); S.J.A. Hessels (Jolanda); A. Simonyan (Aram)

2015-01-01

markdownabstract__Abstract__ Prior research suggests that start-up costs and taxes negatively influence entry into entrepreneurship. Yet, no distinction is made regarding the type of entrepreneurship, particularly innovative versus non-innovative entrepreneurship. Start-up costs, being one-off

Start-up simulations of the PULSAR pulsed tokamak reactor

International Nuclear Information System (INIS)

Werley, K.A.; Bathke, C.G.

1993-01-01

Start-up conditions are examined for a pulsed tokamak reactor that uses only inductively driven plasma current (and bootstrap current). A zero-dimensional (profile-averaged) model containing plasma power and particle balance equations is used to study several aspects of plasma start-up, including: (1) optimization of the start-up pathway; (2) tradeoffs of auxiliary start-up heating power versus start-up time; (3) volt-second consumption; (4) thermal stability of the operating point; (5) estimates of the diverter heat flux and temperature during the start-up transient; (6) the sensitivity of the available operating space to allowed values of the H confinement factor; and (7) partial-power operations

Tokamak start-up with electron-cyclotron heating

International Nuclear Information System (INIS)

Holly, D.J.; Prager, S.C.; Shepard, D.A.; Sprott, J.C.

1981-01-01

Experiments are described in which the start-up voltage in a tokamak is reduced by about a factor of two by the use of a modest amount of electron cyclotron resonance heating power for pre-ionization. The solution of the zero-dimensional start-up equations indicates that the effect is due to the high initial density which increases the rate at which the conductivity increases in the neutral-dominated initial plasma. The effect extrapolates favourably to larger tokamaks. A 50% reduction in the start-up volt-second requirement and impurity reflux is also observed. (author)

Tokamak start-up with electron-cyclotron heating

Energy Technology Data Exchange (ETDEWEB)

Holly, D J; Prager, S C; Shepard, D A; Sprott, J C [Wisconsin Univ., Madison (USA)

1981-11-01

Experiments are described in which the start-up voltage in a tokamak is reduced by about a factor of two by the use of a modest amount of electron cyclotron resonance heating power for pre-ionization. The solution of the zero-dimensional start-up equations indicates that the effect is due to the high initial density which increases the rate at which the conductivity increases in the neutral-dominated initial plasma. The effect extrapolates favourably to larger tokamaks. A 50% reduction in the start-up volt-second requirement and impurity reflux is also observed.

Fusion reactor start-up without an external tritium source

Energy Technology Data Exchange (ETDEWEB)

Zheng, S., E-mail: Shanliang.Zheng@ccfe.ac.uk; King, D.B.; Garzotti, L.; Surrey, E.; Todd, T.N.

2016-02-15

Highlights: • Investigated the feasibility (including plasma physics, neutronics and economics) of starting a fusion reactor from running pure D–D fusion reactor to gradually move towards the D–T operation. • Proposed building up tritium from making use of neutrons generated by D–D fusion reactions. • Studied plasma physics feasibility for pure D–D operation and provided consistent fusion power and neutron yield in the plasma with different mixture of deuterium and tritium. • Discussed the economics aspect for operating a pure D–D fusion reactor towards a full-power D–T fusion reactor. - Abstract: It has long been recognised that the shortage of external tritium sources for fusion reactors using D–T, the most promising fusion fuel, requires all such fusion power plants (FPP) to breed their own tritium. It is also recognised that the initial start-up of a fusion reactor will require several kilograms of tritium within a scenario in which radioactive decay, ITER and subsequent demonstrator reactors are expected to have consumed most of the known tritium stockpile. To circumvent this tritium fuel shortage and ultimately achieve steady-state operation for a FPP, it is essential to first accumulate sufficient tritium to compensate for loss due to decay and significant retention in the materials in order to start a new FPP. In this work, we propose to accumulate tritium starting from D–D fusion reactions, since D exists naturally in water, and to gradually build up the D–T plasma targeted in fusion reactor designs. There are two likely D–D fusion reaction channels, (1) D + D → T + p, and (2) D + D → He3 + n. The tritium can be generated via the reaction channel ‘(1)’ and the 2.45 MeV neutrons from ‘(2)’ react with lithium-6 in the breeding blanket to produce more tritium to be fed back into plasma fuel. Quantitative evaluations are conducted for two blanket concepts to assess the feasibility and suitability of this approach to FPP

Chooz B1 start-up marked by total computer control

International Nuclear Information System (INIS)

Anon.

1995-01-01

The start-up of Chooz B1, the first of EdF's latest generation 1450 MWe N4 reactors, marks the first use in a nuclear power plant of a fully computerised control room. Working in partnership with EdF, Sema Group designed and supplied the advanced command and control system for this plant. (Author)

Smart or Diverse Start-up Teams?

DEFF Research Database (Denmark)

Hoogendoorn, Sander; Parker, Simon C.; Van Praag, Mirjam

2017-01-01

This paper explores the relationship between cognitive abilities and team performance in a start-up setting. We argue that performance in this setting hinges on three tasks: opportunity recognition, problem solving, and implementation. We theorize that cognitive ability at the individual level has...... others can be assigned to tasks that impose a greater cognitive load (problem solving or opportunity recognition). We present the results of a field experiment in which 573 students in 49 teams started up and managed real companies. We ensured exogenous variation in—otherwise random—team composition...... by assigning students to teams based on their measured cognitive abilities. Each team performed a variety of tasks, often involving complex decision making. The key result of the experiment is that the performance of start-up teams first increases and then decreases with ability dispersion. Strikingly, average...

Fundamental study on thermo-hydraulics during start-up in natural circulation boiling water reactors, (1)

International Nuclear Information System (INIS)

Aritomi, Masanori; Chiang Jing-Hsien; Takahashi, Tohru; Wataru, Masumi; Mori, Michitsugu.

1992-01-01

Recently, many concepts, in which passive and simplified functions are actively adapted, have been proposed for the next generation LWRs. The natural circulation BWR is one such considered from the requirements for next generation LWRs as compared with current BWRs. It is pointed out from this consideration that a thermo-hydraulic instability, which may appear during start-up, greatly influences concept feasibility because its occurence makes operation for raising power output difficult. Thermo-hydraulic instabilities are investigated experimentally under conditions simulating normal and abnormal start-up processes. It is clarified that three kinds of thermo-hydraulic instabilities may occur during start-up in the natural circulation BWR according to its procedure and reactor configuration, which are (1) geysering induced by condensation, (2) natural circulation instability induced by hydrostatic head fluctuation in steam separators and (3) density wave instability. Driving mechanisms of the geysering and the natural circulation instability, which have never understood enough, are inferred from the results. Finally, the difference of thermo-hydraulic behavior during start-up processes between thermal natural circulation boilers and the Dodewaard reactor is discussed. (author)

Start-up scenario of compact tori based on REB-injection developed in SPAC-group

International Nuclear Information System (INIS)

Ikuta, K.

1981-01-01

Quasi-static start-up of compact tori without toroidal field coil is reviewed thoroughly in a proposal of the S-1 spheromak. During the formation phase we should note that the rapid heat loss from the plasma will give a bad effect for the generation of the confinement configuration. In the case of fast start-up of the configuration plasma can safely pass over the dangerous state of the instability toward the desirable stable state with a bonus of producing hot plasma. By this reason it is intended to discuss a fast start-up scenario of the compact tori based on REB injection developed in SPAC group

Start-up procedure

International Nuclear Information System (INIS)

Marchl, A.; Krebs, W.D.; Aleite, W.

1975-01-01

The start-up procedure will be shown on a pressurized water reactor, although most of the activities will occur similarly in other reactor types. The commissioning time can be divided into 5 sections, the phases A to E together lasting 26 months. Subsequently there are a test run of one month and the handling-over of the plant to the operator. A survey of the commissioning sections with several important main events is shown. (orig./TK) [de

Automated start-up of EBR-II

International Nuclear Information System (INIS)

Kisner, R.A.

1989-01-01

Oak Ridge National Laboratory (ORNL) and Argonne National Laboratory (ANL) are undertaking a joint project to develop control philosophies, strategies, and algorithms for computer control of the start-up mode of the Experimental Breeder Reactor II (EBR-II). The major objective of this project is to show that advanced liquid-metal reactor (LMR) plants can be operated from low power to full power using computer control. Development of an automated control system with this objective in view will help resolve specific issues and provide proof through demonstration that automatic control for plant start-up is feasible. This paper describes the approach that will be used to develop such a system and some of the features it is expected to have. Structured, rule-based methods, which will provide start-up capability from a variety of initial plant conditions and degrees of equipment operability, will be used for accomplishing mode changes during plant start-up. Several innovative features will be incorporated such as signal, command, and strategy validation to maximize reliability, flexibility to accommodate a wide range of plant conditions, and overall utility. Continuous control design will utilize figures of merit to evaluate how well the controller meets the mission requirements. The operator interface will have unique ''look ahead'' features to let the operator see what will happen next. 15 refs., 7 figs., 1 tab

NEW VENTURE CREATION: HOW START-UPS GROW?

Directory of Open Access Journals (Sweden)

AIDIN SALAMZADEH

Full Text Available ABSTRACT Start-ups, often seen as sources of innovation and change, are prone to failure and accordingly they are attracting considerable attention not least from policy makers and Government officials. However, the various new venture creation studies that have emerged since the early 1980s lack cohesiveness, and the domain remains controversial. This article not only exposes the limitations of the existing body of understanding on the topic but attempts to develop a more comprehensive and comprehendible framework for start up (new venture creation. To do so it uses the frameworks proposed by Whetten, and March and Smith to develop 11 propositions. The resultant model suggests that the creation of a start up involves the identification of an idea or opportunity by an entrepreneur who subsequently organizes a series of activities, mobilizes resources and creates competence using his/her networks in an environment in order to create value. It sheds light on the start-up (new venture creation process and has relevance for entrepreneurs, policy makers and researchers.

Simulation on the start-up of MED seawater desalination system coupled with nuclear heating reactor

International Nuclear Information System (INIS)

Ge Zhihua; Du Xiaoze; Yang Lijun; Yang Yongping; Wu Shaorong

2008-01-01

The mathematical control model for dynamic start-up process of the VTE-MED seawater desalination system was established employing the previous developed non-linear differential equations for system design and performance analysis. The influences on the start-up process of the operating parameters, such as the initial feed brine flow rate and the top brine temperature were analyzed. The relationships among the feed brine flow rate, the gained output ratio (GOR) and the start-up time were also investigated, which can be evidence to determine the optimal initial feed brine flow rate. The results also indicate that the system can consume the total heat rating generated by the low temperature nuclear heating reactor (LT-NHR) even at the most initial start-up stage, implying the present desalination system has excellent coupling characteristics with the LT-NHR. With necessary experiments verifications, the start-up control model developed in this paper can be the theoretical base for the analysis of dynamic performances of the seawater desalination system

Start-up Funding via Equity Crowdfunding in Germany

DEFF Research Database (Denmark)

Angerer, Martin; Brem, Alexander; Kraus, Sascha

2017-01-01

Entrepreneurs often struggle to find sufficient funding for their start-ups. A relatively new way for companies to attract capital is via an internet platform, locating investors who in return receive something in return for their ventures. Equity crowdfunding is one of several types of crowdfund......Entrepreneurs often struggle to find sufficient funding for their start-ups. A relatively new way for companies to attract capital is via an internet platform, locating investors who in return receive something in return for their ventures. Equity crowdfunding is one of several types...... of crowdfunding, and is also known as crowdinvesting in the German-speaking realm. This article predominantly advances the scientific knowledge regarding the success factors of equity crowdfunding for German start-ups. The study conducted nine qualitative interviews with start-ups and crowdinvesting platforms....... Its first result is that German start-ups select crowdinvesting because (1) it is a funding opportunity and (2) it has an expected marketing effect. To organize the results of relevant success factors, the Crowdinvesting Success Model was designed by the researchers. This supports German entrepreneurs...

Manual wheelchair propulsion patterns on natural surfaces during start-up propulsion.

Science.gov (United States)

Koontz, Alicia M; Roche, Bailey M; Collinger, Jennifer L; Cooper, Rory A; Boninger, Michael L

2009-11-01

To classify propulsion patterns over surfaces encountered in the natural environment during start-up and compare selected biomechanical variables between pattern types. Case series. National Veterans Wheelchair Games, Minneapolis, MN, 2005. Manual wheelchair users (N=29). Subjects pushed their wheelchairs from a resting position over high-pile carpet, over linoleum, and up a ramp with a 5 degrees incline while propulsion kinematics and kinetics were recorded with a motion capture system and an instrumented wheel. Three raters classified the first 3 strokes as 1 of 4 types on each surface: arc, semicircular (SC), single looping over propulsion (SL), and double looping over propulsion (DL). The Fisher exact test was used to assess pattern changes between strokes and surface type. A multiple analysis of variance test was used to compare peak and average resultant force and moment about the hub, average wheel velocity, stroke frequency, contact angle, and distance traveled between stroke patterns. SL was the most common pattern used during start-up propulsion (44.9%), followed by arc (35.9%), DL (14.1%), and SC (5.1%). Subjects who dropped their hands below the rim during recovery achieved faster velocities and covered greater distances (.016propulsion patterns is a difficult task that should use multiple raters. In addition, propulsion patterns change during start-up, with an arc pattern most prevalent initially. The biomechanical findings in this study agree with current clinical guidelines that recommend training users to drop the hand below the pushrim during recovery.

Starting up the upstarts.

Science.gov (United States)

Greene, J

1997-12-20

Venture capitalists pour $1 billion a year into health care--and that investment may be the most overlooked indicator of new business opportunities. Signs show that companies focused on consolidation and cost-cutting are off the A list for risk capital. Instead, venture capitalists are targeting start-ups that save money on the front lines by truly managing care.

1-D hybrid code for FRM start-up

International Nuclear Information System (INIS)

Stark, R.A.; Miley, G.H.

1982-01-01

A one-D hybrid has been developed to study the start-up of the FRM via neutral-beam injection. The code uses a multi-group numerical model originally developed by J. Willenberg to describe fusion product dynamics in a solenoidal plasma. Earlier we described such a model for use in determining self-consistent ion currents and magnetic fields in FRM start-up. However, consideration of electron dynamics during start-up indicate that the electron current will oppose the injected ion current and may even foil the attempt to achieve reversal. For this reason, we have combined the multi-group ion (model) with a fluid treatment for electron dynamics to form the hybrid code FROST (Field Reversed One-dimensional STart-up). The details of this merger, along with sample results of operation of FROST, are given

Mobile polishing system of feedwater at start-up feedback from the implementation and future prospects

International Nuclear Information System (INIS)

Faure, Celine; Eade, Kevin; Fontan, Guillaume

2012-09-01

The reduction of the quantity of Steam Generator (SG) metallic oxides deposits, and maintaining a good chemical composition of the secondary side of SG tubes are some of the main objectives being looked at, in order to reduce the risk of SG corrosion, regardless of the alloy used, right from the start-up phase. For all types of outage, obtaining and maintaining sufficient chemical cleanliness at the start-up requires treatment of the water. The treatments are notably: - Water movements using the purge / make-up water method until the chemical criteria have been met. This method can be long and generate large volumes of discharge. - Using suitable resins to remove pollutants from the water. The advantage of this method is that it is selective. - Filtration, allowing for the removal of any insoluble agent. In order to optimise the start-up process, Gravelines and Blayais Nuclear Power Plants (NPPs) put trials in place towards the end of the 1980s. These trials lead to a water supply treatment installation (mobile polishing system- in French Systeme Mobile d'Epuration, SME) being put in place for the start-up phase, made up of an up-stream filter, a mixed-bed resin pollutant trap and a down-stream filter to prevent losing the fines into the feedwater. At the same time, the manifestation of cracking on the secondary side of the steam generator tubes lead EDF to roll out a water treatment for the feedwater dedicated to the start-up. The choice was made not to install a condensate polishing plant, in order to limit notably the pollution risks (resin leaks or waste from the regeneration in the backwater) following difficulties during regeneration. The positive results from the first trials validated for EDF the choice to give priority to the roll-out of the SME to the NPPs judged to be most critical due to the SG material. The SME, installed on a mobile base, can be used on different units at the same station; this reduced the investment and maintenance costs, and

Transient thermal-mechanical coupling behavior analysis of mechanical seals during start-up operation

Science.gov (United States)

Gao, B. C.; Meng, X. K.; Shen, M. X.; Peng, X. D.

2016-05-01

A transient thermal-mechanical coupling model for a contacting mechanical seal during start-up has been developed. It takes into consideration the coupling relationship among thermal-mechanical deformation, film thickness, temperature and heat generation. The finite element method and multi-iteration technology are applied to solve the temperature distribution and thermal-mechanical deformation as well as their evolution behavior. Results show that the seal gap transforms from negative coning to positive coning and the contact area of the mechanical seal gradually decreases during start-up. The location of the maximum temperature and maximum contact pressure move from the outer diameter to inside diameter. The heat generation and the friction torque increase sharply at first and then decrease. Meanwhile, the contact force decreases and the fluid film force and leakage rate increase.

Aloittelevan start-up yrittäjän opas rahoitukseen

OpenAIRE

Lamminsalo, Matti

2015-01-01

Opinnäytetyö käsittelee start-up rahoitusta ja siihen liittyviä toimintamalleja. Opinnäytetyön tuloksena on syntynyt opaskirja: Aloittelevan start-up yrittäjän opas rahoitukseen. Research about start-up ecosystem with investment aspect. As a result guidebook for start-up investment and how to raise a fund was writen.

Start-up of Rapsodie

International Nuclear Information System (INIS)

Pontier, R.

1967-01-01

After giving a general description of Rapsodie this report presents the conditions in which the start-up occurred and in which the tests were carried out. A chronological account is given of the operations and of the main events which occurred. The modifications made to the reactor during this period are described and a synthesis of the results obtained is presented. (author) [fr

The Lean and Global Start-up

DEFF Research Database (Denmark)

Tanev, Stoyan; Rasmussen, Erik Stavnsager

For several decades researchers have studied start-up companies with a focus on international markets, suppliers and networks from their inception and on companies that are establishing new, agile business models. This has resulted in two streams of research: The Born Global and International New...... Ventures research and research with a focus on the Lean Start-up company. It is our intention in this paper to give a short presentation of the two research streams and show how they can be merged into one with a focus on newly established technology oriented firms that are lean and global from...

Product innovation and commercialization in lean global start-ups

DEFF Research Database (Denmark)

Tanev, Stoyan; Rasmussen, Erik Stavnsager; Zijdemans, Erik

2015-01-01

The paper examines the distinctive characteristics of product innovation and commercialization in Lean Global Start-up (LGS) – new technology firms which have adopted a lean and global path from or near to their inception. It suggests an uncertainty vs risk framework which allows integrating two...... research streams – Born Global (BG) firms and lean start-ups. In addition to its integrative theoretical value, the paper offers insights for lean start-up managers dealing with the challenges of a global start....

Life Science Start-up Activities at the Universities of Applied Sciences (UAS).

Science.gov (United States)

Huber, Gerda

2014-12-01

The universities of applied sciences (UAS) provide several values for the society and economy of a country. Besides education of high level professionals, transfer of knowledge from research to applications in industry or as new start-up companies is an important task. This is done in different ways in the various disciplines. In Life Sciences, a key industry branch in Switzerland, innovation is a competitive success factor and research findings from UAS/Life Sciences contribute to the valorization of new technologies to products, services and to business performance. In order to foster awareness for the innovation need of industry, UAS install processes and support for transfer of research and technology results to marketable applications. Furthermore they may facilitate contacts of researchers and students with entrepreneurs in order to animate start-up founding as a true alternative to being employed. Access to coaching and entrepreneurial training completes the essential basis.

Start-up tests of NSRR

International Nuclear Information System (INIS)

1976-12-01

Start up tests of the Nuclear Safety Research Reactor (NSRR) were carried out from June 25 to August 15, 1975. The course of tests is in three stage, i.e. critical approach and zero power, power-up and pulse operation. Performance of the reactor was shown to be in good agreement with the design specifications in both steady-state and pulse operations. Test procedures and the results are presented in four parts: (I) general, (II) zero-power tests, (III) power-up tests, and (IV) pulse operation tests. (auth.)

Environmental mitigation for SCC initiation of BWR core internals by hydrogen injection during start-up

International Nuclear Information System (INIS)

Dozaki, K.; Abe, A.; Nagata, N.; Takiguchi, H.

2004-01-01

Hydrogen injection into the reactor water has been applied to many BWR power stations. Since hydrogen injected accelerates recombination of oxidant generated by water radiolysis, oxidant concentration, such as dissolved oxygen concentration in reactor water can be reduced. As the result of the reduction of oxidant concentration, Electrochemical Corrosion Potential (ECP) at the surface of structural material can be lowered. Lowered ECP moderates Stress Corrosion Cracking (SCC) sensitivity of structural materials, such as stainless steels. As usual, hydrogen injection system begins to work after the plant start-up is finished, when the condition of normal operation is established. Accordingly, Hydrogen Water Chemistry (HWC) does not cover all the period of plant operation. As far as SCC crack growth is considered, loss of HWC during plant start-up does not result in significant crack growth, because of duration of plant start-up is much shorter than that of plant normal operation, when HWC condition is being satisfied. However, the reactor water environment and load conditions during a plant start-up may contribute to the initiation of SCC. It is estimated that the core internals are subjected to the strain rate that may cause susceptibility to SCC initiation during start-up. Dissolved oxygen (DO) and hydrogen peroxide (H 2 O 2 ) has a peak, and ECP is in high levels during start-up. Therefore it is beneficial to perform hydrogen injection during start-up as well in order to suppress SCC initiation. We call it HWC During Start-up (HDS) here. (orig.)

Control device for start-up of reactor depressurization system

International Nuclear Information System (INIS)

Suzuki, Hiroshi; Saito, Minoru; Oda, Shingo; Miura, Satoshi; Hashimoto, Koji; Tate, Hitoshi; Fujii, Kazunobu

1998-01-01

The present invention concerns are emergency reactor core cooling system (ECCS) of a BWR type reactor and provides a control device for start-up of an automatic depressurization system. Namely, the device has an object of preventing erroneous opening of a main steam escape safety value when testing a start-up signal circuit of an automatic depressurization system for testing the automatic depressurization system. A start-up signal circuit receives both signals of a reactor container pressure high signal and a reactor pressure vessel water level low signal and outputs an automatic start-up signal for compulsorily opening a main steam escape safety valve automatically. A test switch having a self-holding circuit is disposed to a central control chamber. A test signal circuit is disposed for preventing transfer of an erroneous start-up signal to the main steam escape safety valve due to a simulation signal during output test signals by the test switch. (I.S.)

Start up testing for the secure automated fabrication line

International Nuclear Information System (INIS)

Gerber, E.W.; Benson, E.M.; Dahl, R.E.

1987-01-01

The secure automated fabrication (SAF) line is a remotely operated, liquid metal reactor fuel fabrication process being built by Westinghouse Hanford Company for the Department of Energy. All process and control equipment is installed and start up testing has been initiated. Start up testing is comprised of five phases, each incorporating higher degrees of equipment integration, automation, and remote control. Testing methodology for SAF line start up is described in this report

Effect of Start-Up Strategies and Electrode Materials on Carbon Dioxide Reduction on Biocathodes.

Science.gov (United States)

Saheb-Alam, Soroush; Singh, Abhijeet; Hermansson, Malte; Persson, Frank; Schnürer, Anna; Wilén, Britt-Marie; Modin, Oskar

2018-02-15

The enrichment of CO 2 -reducing microbial biocathodes is challenging. Previous research has shown that a promising approach could be to first enrich bioanodes and then lower the potential so the electrodes are converted into biocathodes. However, the effect of such a transition on the microbial community on the electrode has not been studied. The goal of this study was thus to compare the start-up of biocathodes from preenriched anodes with direct start-up from bare electrodes and to investigate changes in microbial community composition. The effect of three electrode materials on the long-term performance of the biocathodes was also investigated. In this study, preenrichment of acetate-oxidizing bioanodes did not facilitate the start-up of biocathodes. It took about 170 days for the preenriched electrodes to generate substantial cathodic current, compared to 83 days for the bare electrodes. Graphite foil and carbon felt cathodes produced higher current at the beginning of the experiment than did graphite rods. However, all electrodes produced similar current densities at the end of the over 1-year-long study (2.5 A/m 2 ). Methane was the only product detected during operation of the biocathodes. Acetate was the only product detected after inhibition of the methanogens. Microbial community analysis showed that Geobacter sp. dominated the bioanodes. On the biocathodes, the Geobacter sp. was succeeded by Methanobacterium spp., which made up more than 80% of the population. After inhibition of the methanogens, Acetobacterium sp. became dominant on the electrodes (40% relative abundance). The results suggested that bioelectrochemically generated H 2 acted as an electron donor for CO 2 reduction. IMPORTANCE In microbial electrochemical systems, living microorganisms function as catalysts for reactions on the anode and/or the cathode. There is a variety of potential applications, ranging from wastewater treatment and biogas generation to production of chemicals. Systems

Self-Excited Induction Generator Based Microgrid with Supercapacitor Energy Storage to Support the Start-up of Dynamic Loads

Directory of Open Access Journals (Sweden)

ION, C. P.

2018-05-01

Full Text Available A supercapacitor storage system (SCSS is used for improving the dynamic performances of a microgrid (MG fed by a self-excited induction generator (SEIG, in the case of the direct start-up of an induction motor (IM of comparable power. The primary control system contains a voltage source inverter (VSI with a dump load (DL, to which the SCSS is added. The control strategy for the SCSS consists of injecting power into the VSI DC-link when, because of the overload created by the IM, the DC voltage decreases under the acceptable limit. Thus, the overall performance of the SEIG-supplied MG is significantly improved. Simulations and experimental results accomplished on a laboratory-scale MG validate the effectiveness of the proposed control structure.

From Jam to Start-up

DEFF Research Database (Denmark)

Bering Kjæhr, Emil; Lyngbye Hvid Jensen, Jane; Schoenau-Fog, Henrik

2015-01-01

the foundation for new start-up companies. There are, however, an even larger group of very creative and innovative games and artifacts with great potential that go unpublished. This potentially leads to a loss of entrepreneurial opportunities and ultimately the jobs and careers such games could have fostered...

An analysis of the sliding pressure start-up of SCWR

International Nuclear Information System (INIS)

Wang, F.; Yang, J.; Li, H.; Zhang, Y.; Zhang, J.; Shan, J.; Gou, J.; Zhang, B.; Chen, C.

2012-01-01

In this paper, the preliminary sliding pressure start-up system and scheme of supercritical water-cooled reactor in CGNPC (CGN-SCWR) were proposed. Thermal-hydraulic behavior in start-up procedures was analyzed in detail by employing advanced reactor subchannel analysis software ATHAS. The maximum cladding temperature (MCT for short) and core power of fuel assembly during the whole start-up process were investigated comparatively. The results show that the recommended start-up scheme meets the design requirements from the perspective of thermal-hydraulic. (authors)

Start-up and ramp-up of the PLT tokamak by lower hybrid waves

International Nuclear Information System (INIS)

Jobes, F.C.; von Goeler, S.; Bernabei, S.

1985-01-01

Lower hybrid current drive (LHCD) is an inherently steady-state means of maintaining the poloidal field of a tokamak reactor. However, the energy losses of LHCD, which are proportional to density, are projected to be too great in a fusion reactor for LHCD to be economically feasible during the burn state of the reaction cycle. The authors maintain that LHCD could be extremely useful in restoring poloidal field energy between burns. In situations not requiring a rapid build up, LHCD appears, by extrapolation from present experiments, to be capable of supplying the full required poloidal field energy. In this paper, experiments have been performed on PLT and other tokamaks to examine the role of LHCD in start-up and ramp-up, as well as to examine the efficiency of stady-state current drice. Both the start-up and the ramp-up experiments were quite successful, with the start-up experiment obtaining currents up to 20% of full current for PLT, and the ramp-up experiments obtaining ramp-up efficiencies of approximately 20%

Software for physical start-up console

International Nuclear Information System (INIS)

Arbet, L.; Suchy, R.

1991-01-01

The physical start-up console comprises an PC AT-based control unit equipped with an 80386 processor, and information input/output units. The basic functions to be fulfilled by the control unit software include data acquisition related to the following parameters: neutron physics properties of the reactor core (neutron fluxes recorded by ionization chambers and reactivity recorded by a digital reactimeter), positions of the reactor core control elements (by the digital position meter) and reactor core control measurements, and technological quantities requisite for evaluating physical start-up tests. The measured and calculated data are shown on the control unit display. The setup of the data acquisition system and of user programs is dealt with, and characteristics of the user processes are briefly described. (Z.S.)

Start-up and incremental practice expenses for behavior change interventions in primary care.

Science.gov (United States)

Dodoo, Martey S; Krist, Alex H; Cifuentes, Maribel; Green, Larry A

2008-11-01

If behavior-change services are to be offered routinely in primary care practices, providers must be appropriately compensated. Estimating what is spent by practices in providing such services is a critical component of establishing appropriate payment and was the objective of this study. In-practice expenditure data were collected for ten different interventions, using a standardized instrument in 29 practices nested in ten practice-based research networks across the U.S. during 2006-2007. The data were analyzed using standard templates to create credible estimates of the expenses incurred for both the start-up period and the implementation phase of the interventions. Average monthly start-up expenses were $1860 per practice (SE=$455). Most start-up expenditures were for staff training. Average monthly incremental costs were $58 ($15 for provision of direct care [SE=$5]; $43 in overhead [SE=$17]) per patient participant. The bulk of the intervention expenditures was spent on the recruitment and screening of patient participants. Primary care practices must spend money to address their patients' unhealthy behaviors--at least $1860 to initiate systematic approaches and $58 monthly per participating patient to implement the approaches routinely. Until primary care payment systems incorporate these expenses, it is unlikely that these services will be readily available.

Start-up of NPP Krsko; Pokusno obratovanje NE Krsko

Energy Technology Data Exchange (ETDEWEB)

Spiler, J; Aralica, J [Nuklearna elektrana Krsko, Krsko (Yugoslavia)

1984-07-01

The report describes a review of start-up program and its realisation. There are also described some more significant start-up results with their evaluation. The most significant operation criteria are compared between NPP Krsko and other similar plants in the world. The comparison shows that after the first contractors and operation personnel efforts have been accomplished, our first nuclear power plant is a safe and reliable source of electric power. At the end there are listed NPP Krsko start-up recommendations and experience. (author)

The Rationality and Irrationality of Financing Green Start-Ups

Directory of Open Access Journals (Sweden)

Linda Bergset

2015-11-01

Full Text Available Green start-ups contribute towards a transition to a more sustainable economy by developing sustainable and environmentally friendly innovation and bringing it to the market. Due to specific product/service characteristics, entrepreneurial motivation and company strategies that might differ from that of other start-ups, these companies might struggle even more than usual with access to finance in the early stages. This conceptual paper seeks to explain these challenges through the theoretical lenses of entrepreneurial finance and behavioural finance. While entrepreneurial finance theory contributes to a partial understanding of green start-up finance, behavioural finance is able to solve a remaining explanatory deficit produced by entrepreneurial finance theory. Although some behavioural finance theorists are suggesting that the current understanding of economic rationality underlying behavioural finance research is inadequate, most scholars have not yet challenged these assumptions, which constrict a comprehensive and realistic description of the reality of entrepreneurial finance in green start-ups. The aim of the paper is thus, first, to explore the specifics of entrepreneurial finance in green start-ups and, second, to demonstrate the need for a more up-to-date conception of rationality in behavioural finance theory in order to enable realistic empirical research in this field.

Start-up analysis of INET-5 MW district heating prototype reactor

International Nuclear Information System (INIS)

Li Tianshu

1991-09-01

The main features and thermohydraulic design parameters of the INET-5 MW reactor (INET: Institute of Nuclear Technology of Tsinghua University, Beijing) are presented. The start-up process and the effect of thermohydraulic instability on start-up process have been analyzed. The main obstacle of start-up process of INET-5 MW reactor is to pass the instability region from 1 atm to normal operation condition. For avoiding instability, the start-up process should be divided into two steps. The results of three different start-up proposals calculated by DACOL code are given and compared. The possibility of instabilities for each proposal has been checked. The checked results show that there is no instability during start-up of the three proposals. So, it is supposed that the INET-5 MW reactor can safely and stably reach the operation conditions. Finally, some conclusions about the effect of instability on start-up in boiling mode of INET-5MW reactor are given

A critical analysis of the influence of start-up factors in small businesses and entrepreneurial ventures in SA

Directory of Open Access Journals (Sweden)

J. J. Van Vuuren

2007-12-01

, education and training are given in South Africa, policy makers and educational institutions should take note of the various differences in needs and make provision in their support and training for these differences. It is also recommended that existing small business owners and entrepreneurs must create their own support structure specifically when they move from the start-up stage to the new firm stage, as this is a stage where support and advice is much needed.

Experience with the design and start up of two full-scale UASB plants in Brazil: enhancements and drawbacks.

Science.gov (United States)

Chernicharo, C A L; Almeida, P G S; Lobato, L C S; Couto, T C; Borges, J M; Lacerda, Y S

2009-01-01

This paper discusses the main drawbacks and enhancements experienced with the design and start up of two full-scale UASB plants in Brazil. The topics addressed are related to blockage of inlet pipes, scum accumulation, seed sludge for the start-up, corrosion and gas leakage, odour generation and sludge management. The paper describes the main improvements achieved.

Operator training simulator for nuclear power plant

International Nuclear Information System (INIS)

Shiozuka, Hiromi

1977-01-01

In nuclear power plants, training of the operators is important. In Japan, presently there are two training centers, one is BWR operation training center at Okuma-cho, Fukushima Prefecture, and another the nuclear power generation training center in Tsuruga City, Fukui Prefecture, where the operators of PWR nuclear power plants are trained. This report describes the BWR operation training center briefly. Operation of a nuclear power plant is divided into three stages of start-up, steady state operation, and shut down. Start-up is divided into the cold-state start-up after the shut down for prolonged period due to periodical inspection or others and the hot-state start-up from stand-by condition after the shut down for a short time. In the cold-state start-up, the correction of reactivity change and the heating-up control to avoid excessive thermal stress to the primary system components are important. The BWR operation training center offers the next three courses, namely beginner's course, retraining course and specific training course. The training period is 12 weeks and the number of trainees is eight/course in the beginner's course. The simulator was manufactured by modeling No. 3 plant of Fukushima First Nuclear Power Station, Tokyo Electric Power Co. The simulator is composed of the mimic central control panel and the digital computer. The software system comprises the monitor to supervise the whole program execution, the logic model simulating the plant interlock system and the dynamic model simulating the plant physical phenomena. (Wakatsuki, Y.)

LightCDD: Application of a Capability-Driven Development Method for Start-ups Development

Directory of Open Access Journals (Sweden)

Hasan Koç

2017-04-01

Full Text Available Novice innovators and entrepreneurs face the risk of designing naive business models. In fact, lack of viability in business models is perceived to be a major threat for the start-up success. Both the literature and the responses we gathered from experts in incubation present evidences of this problem. The LightCDD method helps entrepreneurs in the analysis, design and specification of start-ups that are context aware and adaptive to contextual changes and evolution. In this article we describe the LightCDD method, a context-aware enterprise modeling method that is tailored for business model generation. The LightCDD applies a lightweight Capability‑Driven Development (CDD methodology. It reduces the set of modeling constructs and guidelines to facilitate its adoption by entrepreneurs, yet keeping it expressive enough for their purposes and, at the same time, compatible with the CDD methodology. We provide a booklet with the LightCDD method for start-ups development. The feasibility of the LightCDD method is validated by means of its application to one start-up development case. From a practitioner viewpoint (entrepreneurs and experts in incubation, it is important to provide integrative modeling perspectives to specify business ideas, but it is vital to keep it light. The LightCDD is giving a step forward in this direction. From a researcher point of view, the LightCDD booklet facilitates the application of LightCDD to different start-up development cases. The feasibility validation has produced important feedback for further empirical validation exercises in which is necessary to study the scalability and sensitivity of LightCDD.

New start-up channels and multichannel analyzer at the RB reactor; Novi start-up kanali i videkanalni analizator na reaktoru Rb

Energy Technology Data Exchange (ETDEWEB)

Sotic, O; Markovic, H; Vranic, S; Dimitrijevic, Z; Pesic, M [Boris Kidric Institute of Nuclear Sciences Vinca, Beograd (Yugoslavia)

1978-01-15

New start-up channels and a multichannel analyzer were purchased in 1977 for the RB reactor. Both start-up channels contain BF{sub 3} neutron detectors, preamplifier, amplifier, single-channel analyzer, scaler, ratemeter, control unit, recording instrument. This document contains detailed technical description of these devices as well as characteristics of the multichannel analyzer which is being tested and will be used for measuring irradiation in the vicinity of the reactor.

Lean and global technology start-ups

DEFF Research Database (Denmark)

Tanev, Stoyan; Rasmussen, Erik Stavnsager; Zijdemans, Erik

2015-01-01

In this paper the authors introduce the concept of Lean Global Start-up (LGS) as a way of emphasizing the impossibility for new technology start-ups to deal separately with business development, innovation and early internationalization. For a newly established technology firm the task of being...... global and innovative at the same time should be seen as one process. The paper has two components – an introductory conceptual part and an empirical part that should be considered as basis for the preliminary validation of the conceptual insights. The research sample includes six firms – three from...... Canada and three from Denmark. The firms have had significant problems with the complexity, uncertainties and risks of being innovative on a global scale. They have however found ways of addressing these problems by a disciplined knowledge sharing and IP protection strategy and the efficient use...

Start-up of spherical tokamak without a center solenoid

International Nuclear Information System (INIS)

Maekawa, Takashi; Nagata, Masayoshi

2012-01-01

For low-aspect tokamak reactors, spherical tokamak reactors, ST-type FESF/CTFs, it is essential to remove or minimize a central solenoid (CS). Even with the minimized CS, non-inductive start up of the plasma current is required. Rapid increase in the spontaneous plasma current at the final stage of current start-up drives ignition. At the initial stage, formation of plasma and magnetic surfaces are required. As non-inductive plasma start-up scenarios, ECH/ECCD, LHCD, HHFW, DC HELICITY injection, plasma merging and NBI have been studied. In the present article, the present status and future prospect of experimental and theoretical works on these subjects. (author)

Start-up emissions from residential down-draught wood log boilers

Energy Technology Data Exchange (ETDEWEB)

Pettersson, E. (Luleaa Univ. of Technology (Sweden). Energy Technology Centre in Piteaa), Email: esbjorn.pettersson@ltu.se

2009-07-01

Start-up emissions can be substantial and even dominating in real use. There are few published investigations regarding the relative importance of different parameters on the start-up emissions. It has though recently been stated that for down-draught boilers, best results are achieved if the wood charge is ignited fairly close to the secondary chamber. The objective of the experimental work was to evaluate the effect of different fuel and design parameters on the start-up emissions, using experimental design which enables a direct comparison between different parameters, using three levels of preheating of secondary air, electric preheating of primary air, different moisture and size of the start wood as well as different amounts of birch bark, which was used to spread the fire during the start. The boiler did not use a bypass damper and the full fuel charge was added before igniting the start wood through an ignition door situated slightly above the grate. The only significant results for the four parameters were that smaller and drier start wood gave lower start-up emissions. Extra amount of birch bark gave the same result. The most important parameters are the fuel parameters, which mean that the result is generally applicable. (orig.)

An eigenexpansion technique for modelling plasma start-up

International Nuclear Information System (INIS)

Pillsbury, R.D.

1989-01-01

An algorithm has been developed and implemented in a computer program that allows the estimation of PF coil voltages required to start-up an axisymmetric plasma in a tokamak in the presence of eddy currents in toroidally continuous conducting structures. The algorithm makes use of an eigen-expansion technique to solve the lumped parameter circuit loop voltage equations associated with the PF coils and passive (conducting) structures. An example of start-up for CIT (Compact Ignition Tokamak) is included

Decision Enhancement Services for Small and Medium Enterprise Start-Ups in Uganda

NARCIS (Netherlands)

Sol, H G; Basaza, Habinka; Sprague, Ralph H.

2012-01-01

While start-up firms create a substantial economic impact on most economies, the failure rate of start-up firms seems to remain high due to inadequate agile decision services. Deciding to start-up mining Small and Medium Enterprises (SME) is a challenging task in Uganda. Research on SME start-up

Double stage dry-wet-fermentation - start-up of a pilot biogas plant

International Nuclear Information System (INIS)

Buschmann, Jeannette; Busch, Gunter; Burkhardt, Marko

2009-01-01

The Brandenburg University of Technology (BTU) has developed a double stage dry-wet fermentation process for fast and safe anaerobic degradation. Originally designed for treatment of organic wastes, this process allows using a wide variety of solid biodegradable materials. The dividing of hydrolysis and methanation in this process, allows an optimization of the different steps of biogas generation separately. The main advantages of the process are the optimum process control, an extremely stable process operation and a high gas productivity and quality. Compared to conventional processes, the retention times within the percolation stage (hydrolysis) are reduced considerably. In cooperation with the engineering and consulting company GICON, the technology was qualified further to an industrial scale. In 2007 a pilot plant, and, simultaneously, an industrial plant were built by GICON based on this double stage technology. Based on practical experience from the operation of laboratory fermentation plants, the commissioning of the pilot plant was planned, controlled and monitored by our institution. The start-up of a biogas plant of this type focuses mainly on the inoculation the of methane reactor. The growth of microbial populations and generation of a stable biocenosis within the methane reactor is essential and affects the duration of starting period as well as the methanation efficiency a long time afterwards. This paper concerns with start-up of a pilot biogas plant and discusses particular occurrences and effects during this period. (author)

Agile metodologies use for software development in Slovenian start-ups

OpenAIRE

Kašnik, Matic

2014-01-01

The thesis presents and describes the use of agile methodologies which are being used by Slovenian tech start-up companies. It describes the basic features, advantages and disadvantages of various agile methodologies such as Scrum, extreme programming, lean start-up and method Kanban. We made a review of the most used agile methodologies in Slovenian technology start-up companies. In particular, we focus on variety of tools, technics and approaches used by the development teams and where do t...

AUDIT OF INNOVATIVE IDEAS AS THE PREVIOUS STAGE OF THE BUSINESS-PLAN OF START-UP PROJECTS

Directory of Open Access Journals (Sweden)

O. Zhylinska

2014-09-01

Full Text Available The phenomenon of feasibility reasoning of venture capital investment for the implementation of innovative ideas is revealed. The main elements of the methodology for feasibility of start-up projects, based on the concept of combination of life cycle of the market, product innovation and startup companies, are characterized. The comparative analysis of methods feasibility study and business plan start-up project is made, the importance of innovative ideas audit in future economic information generation and investment decisions of informal venture capital investors are shown.

Start-Up Size Strategy and Risk Management: Impact on New Venture Performance

OpenAIRE

André van Stel; Andrew Burke; José Maria Millán; Concepcion Roman

2013-01-01

Start-up size is a key strategic decision for entrepreneurs. Should entrepreneurs start up close to minimum efficient scale or should they take less risks and start-up on a smaller scale? Previously, this strategic decision appeared to be one of simply making a choice between a higher risk/reward larger start-up versus a lower risk/reward smaller scale start-up. However, recent research on the relationship between risk management and performance (Burke, 2009) indicates that in situations of g...

Start-up of plasma current by electron Bernstein wave

International Nuclear Information System (INIS)

Maekawa, Takashi; Tanaka, Hitoshi; Uehide, Masaki

2009-01-01

Electron cyclotron current drive by electron Bernstein (EB) waves for the start-up and ramp-up of toroidal plasma current with no central solenoid in tokamaks is discussed. It is shown that high N// EB waves have ability to ramp-up the current against the counter voltage from self-induction, where N// is the parallel refractive index to the magnetic field, and they are especially suitable for initial current start-up phase where the bulk electron temperature is low enough to ensure high N// EB waves. (author)

Dynamics and Control During Start-Up of Energy Integrated Distillation Column

DEFF Research Database (Denmark)

of the inherent effects of process integration upon a start-up procedure. In particular the effect of energy recycle upon the possible start-up sequence, and the effect of using an actuator for control purposes, i.e. the heat pump, which in itself requires significant start-up time. The experimental application...

Producing an Assistant Guide for Haaga-Helia StartUp School

OpenAIRE

Averina, Maria

2016-01-01

This product-oriented thesis was commissioned by the StartUp School (SUS), a program of Haaga-Helia University of Applied Sciences that supports Haaga-Helia students to become entrepreneurs. The StartUp School offers Haaga-Helia students a six-month assistant trainee position. Consequently, every half a year there is a new assistant at the StartUp School. The commissioning party was lacking an essential tool to introduce work tasks to new assistant interns. The objective of the thesis was...

Dynamics and Control During Start-up of Energy Integrated Distillation Column

DEFF Research Database (Denmark)

Eden, Mario Richard; Koggersbøl, Arne; Hallager, L.

2000-01-01

of the inherent effects of process integration upon a start-up procedure. In particular the effect of energy recycle upon the possible start-up sequence, and the effect of using an actuator f or control purposes, i.e. the heat pump, which in itself requires significant start-up time. The experimental application...

78 FR 73753 - Partnerships; Start-Up Expenditures; Organization and Syndication Fees

Science.gov (United States)

2013-12-09

... deduct start-up expenditures in the taxable year in which the active trade or business begins. The amount... begins. All start-up expenditures that relate to the active trade or business are considered in...(b) to amortize start-up expenditures for the taxable year in which the active trade or business to...

Experience from start-ups of the first ANITA Mox plants.

Science.gov (United States)

Christensson, M; Ekström, S; Andersson Chan, A; Le Vaillant, E; Lemaire, R

2013-01-01

ANITA™ Mox is a new one-stage deammonification Moving-Bed Biofilm Reactor (MBBR) developed for partial nitrification to nitrite and autotrophic N-removal from N-rich effluents. This deammonification process offers many advantages such as dramatically reduced oxygen requirements, no chemical oxygen demand requirement, lower sludge production, no pre-treatment or requirement of chemicals and thereby being an energy and cost efficient nitrogen removal process. An innovative seeding strategy, the 'BioFarm concept', has been developed in order to decrease the start-up time of new ANITA Mox installations. New ANITA Mox installations are started with typically 3-15% of the added carriers being from the 'BioFarm', with already established anammox biofilm, the rest being new carriers. The first ANITA Mox plant, started up in 2010 at Sjölunda wastewater treatment plant (WWTP) in Malmö, Sweden, proved this seeding concept, reaching an ammonium removal rate of 1.2 kgN/m³ d and approximately 90% ammonia removal within 4 months from start-up. This first ANITA Mox plant is also the BioFarm used for forthcoming installations. Typical features of this first installation were low energy consumption, 1.5 kW/NH4-N-removed, low N₂O emissions, started up at Sundets WWTP in Växjö, Sweden, reached full capacity with more than 90% ammonia removal within 2 months from start-up. By applying a nitrogen loading strategy to the reactor that matches the capacity of the seeding carriers, more than 80% nitrogen removal could be obtained throughout the start-up period.

Start-Up Funding Intentions Among Nascent Nonprofit Entrepreneurs: An Exploratory Investigation

Directory of Open Access Journals (Sweden)

Fredrik O. Andersson

2018-04-01

Full Text Available This paper explores the start-up funding intentions of nascent nonprofit entrepreneurs, i.e., individuals in the process of creating a new formal nonprofit organization. The main questions being examined are from which sources nascent nonprofit entrepreneurs anticipate to obtain start-up funding from, how much start-up funding nascent nonprofit entrepreneurs anticipate they will need to formally launch their new nonprofit, and if there are any differences in funding intentions among nascent nonprofit entrepreneurs with and without previous start-up experience. The results from a survey of 103 nascent nonprofit entrepreneurs in Kansas City are presented and contrasted with existing research on funding of new nonprofit organizations. The results show an apparent preference for start-up funding from philanthropic grants and private donations, along with personal contributions of the founder(s.

Critical Incidents of Growth in Nordic eHealth Service Start-Ups

Directory of Open Access Journals (Sweden)

Martti Saarela

2017-06-01

Full Text Available Digitalisation can revolutionise healthcare delivery and provide new business opportunities for innovative start-ups. Start-up businesses in the healthcare service sector are a promising source of new employment and innovations. The start-up stage is the most critical period for the survival of a business, as decisions made during the early stages have a definitive influence on success. This study seeks to clarify the early development of eHealth service start-ups. To summarise the research problem, the authors ask the following question: What are the critical incidents related to the early development of eHealth service start-ups? The units of analysis in this study are 14 Nordic eHealth service start-ups located in Sweden and Finland. The Critical Incident Technique (CIT and semi-structured interviews were applied for data collection. The results are of interest to the public sector, which plays an essential role in healthcare as a service producer, but also as a creator of the business conditions of and opportunities for small businesses.

Automatic start-up system of nuclear reactor based on sequence control technology

International Nuclear Information System (INIS)

Zhang Yao; Zhang Dafa; Peng Huaqing

2009-01-01

A conceptive design of an automatic start-up system based on the sequence control for the nuclear reactors is given in this paper, so as to solve the problems during the start-up process, such as the long operation time, low automatic control level and high accident rate. The start-up process and its requirements are analyzed in detail at first. Then,the principle, the architecture, the key technologies of the automatic start-up system of nuclear reactors are designed and discussed. With the designed system, the automatic start-up of the nuclear reactor can be realized,the work load of the operator can be reduced,and the safety and efficiency of the nuclear power plant during its start-up can be improved. (authors)

Established Companies meet Start-ups : Case: A service to research developing business models in start-up hot spots around the globe

OpenAIRE

Eisenblätter, Simon

2016-01-01

This thesis presents a business model with the aim to improve conversation between traditional companies and newly established start-ups. The assumption that such conversation can be facilitated by scouting for innovation in start-up hot spots around the world, will be discussed throughout the paper. The purpose of this work is to lay out a plan which can be presented to a first range of possible customers, with the goal of negotiating a trial cooperation. Before introducing the busi...

Giving start-ups a helping hand

CERN Multimedia

2008-01-01

The French-Swiss foundation for research and technology (FFSRT) joined forces with CERN to organise an information day on setting up new businesses, at the Globe of Science and Innovation. The participants heard talks by entrepreneurs who started out at CERN, sharing their experiences and difficulties.CERN is a hot-bed of high-tech skills and know-how, and the Organization works actively to transfer this expertise to society. Some such innovations can lead to new business start-ups, but it can be extremely difficult to obtain the information and support you need to find your way through the inevitable administrative labyrinth. By opening its doors to the Fondation franco-suisse pour la recherche et la technologie (FFSRT) and hosting this "Entrepreneurial Day" on 7 March, CERN has clearly flagged its desire to assist budding entrepreneurs. The day was jointly kicked off by Olga Hooft, General Manager of the FFSRT, and Maximilian Metzger, CERN’s Se...

Start-up of the ohmic phase in JET

International Nuclear Information System (INIS)

Tanga, A.; Christiansen, J.P.; Cordey, J.G.; Ejima, S.; Kellman, A.; Lazzaro, E.; Lomas, P.J.; Thomas, P.R.

1985-01-01

JET has been designed to permit the study of plasmas in which alphaparticle heating is a significant part of the power balance. In order to have a sufficient thermonuclear yield and to trap the resulting alphaparticles, JET is similar in its dimensions and plasma current to the next generation of reactor-like devices such as NET, FER and INTOR. For this reason, the authors see the results from the study of the start-up of ohmically heated plasmas in JET as highly relevant. Discussed is the range that has been achieved in all major parameters with ohmic heating. Experiences with the wall conditioning technique and the results of ion cyclotron heating experiments in JET are outlined. This paper also describes the stages of plasma formation, current rise and ohmic flat-top

Challenges and success factors in pursuing disruptive innovations: A Finnish hightech start-up case study

OpenAIRE

Majamäki, Liisa; Akpinar, Murat

2014-01-01

Despite increasing acknowledgment of disruptive innovations for their potential to generate high growth, their high rate of failure necessitates research on what kind of challenges start-ups pursuing disruptive innovations face and how they overcome them. This study contributes to increase understanding in this field by studying the case of a Finnish high-tech start-up’s successful new-market disruption in business-to-business context. Identifying disruptive innovations that have market poten...

Starting-up sequence of the AWEC-60 wind turbine

International Nuclear Information System (INIS)

Avia, F.; Cruz, M. de la.

1991-01-01

One of the most critical status of the wind turbines operation is the starting-up sequence and the connection to the grid, due to the actuating loads that could be several times the loads during operation at rated conditions. Due to this fact, the control strategy is very important during the starting-up sequence in order to minimize the loads on the machine. For this purpose it is necessary to analyze the behaviour of the wind turbine during that sequence in different wind conditions and machine conditions. This report shows the graphic information about fifty starting-up sequences of the AWEC-60 wind turbine of 60 m. diameter and 1200 kW of rated power, recorded in April 1991 and cut-out wind speed. (author)

Multi-Objective Optimization of Start-up Strategy for Pumped Storage Units

Directory of Open Access Journals (Sweden)

Jinjiao Hou

2018-05-01

Full Text Available This paper proposes a multi-objective optimization method for the start-up strategy of pumped storage units (PSU for the first time. In the multi-objective optimization method, the speed rise time and the overshoot during the process of the start-up are taken as the objectives. A precise simulation platform is built for simulating the transient process of start-up, and for calculating the objectives based on the process. The Multi-objective Particle Swarm Optimization algorithm (MOPSO is adopted to optimize the widely applied start-up strategies based on one-stage direct guide vane control (DGVC, and two-stage DGVC. Based on the Pareto Front obtained, a multi-objective decision-making method based on the relative objective proximity is used to sort the solutions in the Pareto Front. Start-up strategy optimization for a PSU of a pumped storage power station in Jiangxi Province in China is conducted in experiments. The results show that: (1 compared with the single objective optimization, the proposed multi-objective optimization of start-up strategy not only greatly shortens the speed rise time and the speed overshoot, but also makes the speed curve quickly stabilize; (2 multi-objective optimization of strategy based on two-stage DGVC achieves better solution for a quick and smooth start-up of PSU than that of the strategy based on one-stage DGVC.

Start-up test of the prototype heavy water reactor 'FUGEN', (1)

International Nuclear Information System (INIS)

Ando, Hideki; Kawahara, Toshio

1982-01-01

The advanced thermal prototype reactor ''Fugen'' is a heavy water-moderated, boiling light water-cooled power reactor with electric output of 165 MW, which has been developed since 1966 as a national project. The start-up test was begun in March, 1978, being scheduled for about one year, and in March, 1979, it passed the final pre-use inspection and began the full scale operation. In this paper, the result of the start-up test of Fugen is reported. From the experience of the start-up test of Fugen, the following matters are important for the execution of start-up test. 1) Exact testing plan and work schedule, 2) the organization to perform the test, 3) the rapid evaluation of test results and the reflection to next testing plan, and 4) the reflection of test results to rated operation, regular inspection and so on. In the testing plan, the core characteristics peculiar to Fugen, and the features of heavy water-helium system, control system and other equipment were added to the contents of the start-up test of BWRs. The items of the start-up test were reactor physics test, plant equipment performance test, plant dynamic characteristic test, chemical and radiation measurement, and combined test. The organization to perform the start-up test, and the progress and the results of the test are reported. (Kako, I.)

IMMEDIATE EFFECTS OF DEEP TRUNK MUSCLE TRAINING ON SWIMMING START PERFORMANCE.

Science.gov (United States)

Iizuka, Satoshi; Imai, Atsushi; Koizumi, Keisuke; Okuno, Keisuke; Kaneoka, Koji

2016-12-01

In recent years, deep trunk muscle training has been adopted in various sports, including swimming. This is performed both in everyday training and as part of the warm-up routine before competitive races. It is suggested that trunk stabilization exercises are effective in preventing injury, and aid in improving performance. However, conclusive evidence of the same is yet to be obtained. The time of start phase of swimming is a factor that can significantly influence competition performance in a swimming race. If trunk stabilization exercises can provide instantaneous trunk stability, it is expected that they will lead to performance improvements in the start phase of swimming. The purpose of this study was to investigate the immediate effect of trunk stabilization exercises on the start phase in swimming. Intervention study. Nine elite male swimmers (mean age 20.2 ± 1.0 years; height 174.4 ± 3.5 cm; weight 68.9 ± 4.1 kg) performed the swimming start movement. The measurement variables studied included flying distance, and the time and velocity of subjects at hands' entry and on reaching five meters. Measurements were taken in trials immediately before and after the trunk stabilization exercises. A comparison between pre- and post-exercise measurements was assessed. The time to reach five meters (T 5m ) decreased significantly after trunk stabilization exercises, by 0.019 s (p = 0.02). Velocity at entry (V entry ) did not demonstrate significant change, while velocity at five meters (V 5m ) increased significantly after the exercises (p = 0.023). In addition, the speed reduction rate calculated from V entry and V 5m significantly decreased by 5.17% after the intervention (p = 0.036). Trunk stabilization exercises may help reduce the time from start to five meters in the start phase in swimming. The results support the hypothesis that these exercises may improve swimming performance. Level 3b.

Automobile Starting and Lighting System Maintenance Training ...

African Journals Online (AJOL)

The purpose of this study is to develop automobile starting and lighting system maintenance training manual for technical college students. Research and Development (R and D) design was adopted for the study. The population of the study is 348, comprising of 76 auto-mechanics teachers, 36 automobile supervisors and ...

Time program using in automatization of steam turbines start-up

International Nuclear Information System (INIS)

Lejzerovich, A.Sh.; Melamed, A.D.

Examples and arguments for developing time programs of changing basic parameters of automated start-up of TPP and NPP high-power steam turbines are considered. Basic parameters subject to controlled changing at automatization of turbine start-up are rotation frequency, loading and temperature of steam supplied to the turbine. Principle facility schemes of program regulation of steam temperature at the start-up are presented. The facility scheme of loading the NPP wet steam turbine is given. The principles of developing time programs, of changing basic parameters of automated start-up enable realizing transient processes close to theoretically optimum processes at arbitrary prestart-up state of the turbine by means of rather simple autatic facilities. In particular, for automated temperature increase of steam supplied to the turbine of TES power units and AES turbine loading, it is advisable to use programs in the form of linear dependence of velocity of changing the controlled parameter on the given value, the initial level, from which the parameter increase with a regulated velocity is realized, is given in the form of analogue dependence on the turbine prestart-up state. The programs described and the schemes of their realization have been approved at the automatization of 300 MW power unit starts up with the K-300-240 turbine and K-220-44 turbine as well as used when creating control system for turbines of 500 MW and higher for designed TPP and NPP power units

Starting Up after 50. CELCEE Digest.

Science.gov (United States)

Seymour, Nicole

Researchers are finding that older entrepreneurs are an increasing population in many Western countries. It is important to distinguish between entrepreneurs who have simply reached the age of 50 versus those who start up businesses after this age. The latter group is of particular interest because these people have presumably never faced the…

An Ultra Low Noise Self-Starting Pulse Generator

DEFF Research Database (Denmark)

Lasri, J.; Bilenca, A.; Dahan, D.

2002-01-01

We describe a self-starting optical pulse source generating 10 GHz, 15 ps pulses with an average jitter of 43 fs and a o.15% amplitude noise over a frequency range of 500 Hz - 1 MHz.......We describe a self-starting optical pulse source generating 10 GHz, 15 ps pulses with an average jitter of 43 fs and a o.15% amplitude noise over a frequency range of 500 Hz - 1 MHz....

Start-Up of FEL Oscillator from Shot Noise

International Nuclear Information System (INIS)

Kumar, V.; Krishnagopal, S.; Fawley, W.M.

2007-01-01

In free-electron laser (FEL) oscillators, as in self-amplified spontaneous emission (SASE) FELs, the buildup of cavity power starts from shot noise resulting from the discreteness of electronic charge. It is important to do the start-up analysis for the build-up of cavity power in order to fix the macropulse width from the electron accelerator such that the system reaches saturation. In this paper, we use the time-dependent simulation code GINGER [1]to perform this analysis. We present results of this analysis for the parameters of the Compact Ultrafast TErahertz FEL (CUTE-FEL) [2] being built at RRCAT

Research on the intermediate process of a free-piston linear generator from cold start-up to stable operation: Numerical model and experimental results

International Nuclear Information System (INIS)

Feng, Huihua; Guo, Chendong; Jia, Boru; Zuo, Zhengxing; Guo, Yuyao; Roskilly, Tony

2016-01-01

Highlights: • The intermediate process of free-piston linear generator is investigated for the first time. • “Gradually switching strategy” is the best strategy in the intermediate process. • Switching at the top dead center position timing has the least influences on free-piston linear generator. • After the intermediate process, the operation parameters value is smaller than those before the intermediate process. - Abstract: The free-piston linear generator (FPLG) has more merits than the traditional reciprocating engines (TRE), and has been under extensive investigation. Researchers mainly investigated on the starting process and the stable generating process of FPLG, while there has not been any report on the intermediate process from the engine cold start-up to stable operation process. Therefore, this paper investigated the intermediate process of the FPLG in terms of switching strategy and switching position based on simulation results and test results. Results showed that when the motor force of the linear electric machine (LEM) declined gradually from 100% to 0% with an interval of 50%, and then to a resistance force in the opposite direction of piston velocity (generator mode), the operation parameters of the FPLG showed minimal changes. Meanwhile, the engine operated more smoothly when the LEM switched its working mode from a motor to a generator at the piston dead center, compared with that at the middle stroke or a random switching time. More importantly, after the intermediate process, the operation parameters of FPLG were smaller than that before the intermediate process. As a result, a gradual motor/generator switching strategy was recommended and the LEM was suggested to switch its working mode when the piston arrived its dead center in order to achieve smooth engine operation.

Power start up of the Dalat nuclear research reactor

International Nuclear Information System (INIS)

Pham Duy Hien; Ngo Quang Huy; Vu Hai Long; Tran Khanh Mai

1994-01-01

After accomplishing the physical start-up of the reactor, the power start-up was carried out in February 1984. The power of the reactor has reached: 10 KW on 6/2/1984, 100 KW on 7/2/1984, 200 KW and 300 KW on 8/2/1984; 400 KW and nominal power 500 KW on 9/2/1984. The reactivity temperature coefficient and the xenon poisoning were determined. 3 figs., 12 tabs

Spring 
start-up for the LHC

CERN Multimedia

2007-01-01

A new schedule for the commissioning of the LHC was presented to the Council at its Session in June. The start-up of the accelerator is scheduled for May 2008, to allow all technical problems to be resolved.

Strategic Management: Business Model Canvas for Start-Up Company

OpenAIRE

Sonninen, Anna

2016-01-01

Thesis is written about development of Kakunpala as a Start-Up Company, because development processes and ideas are the key factors for future success of the company. The aim of this thesis is to understand Strategic Management of the Company and Development processes,by using the SWOT analysis before and after development and by applying Business Model Canvas template to the Start-Up Company, and by describing Customer Journey: what relations Kakunpala has with clients and its processes...

Social Capital in Knowledge Intensive Start-Ups

DEFF Research Database (Denmark)

Neergaard, Helle; Madsen, Henning

This paper addresses social capital in biotechnology, medico and information communication start-ups using both quantitative and qualitative data. It shows that founding teams are primarily composed of 'trusted alters' and that networking patterns are highly influenced by the entrepreneur...

Optimal relations of the parameters ensuring safety during reactor start-up

International Nuclear Information System (INIS)

Yurkevich, G.P.

2004-01-01

Procedure and equations for the determination of optimal ratio between parameters allowing safe removal of reactor in critical state are suggested. Initial pulse frequency of pulsed start-up channel and power of neutron source are decreased by reduced rate of changing reactivity during automatic start-up, disposition of pulsed neutron detector in the range with neutron flux density to 5·10 12 s -1 cm -2 at standard power, separate signal of period for the use in chains of automatic start-up and emergency protection, reduction of pulses frequency of the start-up channel (the frequency is equal to 4000 c -1 ). Procedure and equations for the determination of optimal parameters are effected with the account of statistic character of pulsed detector frequency and false outlet signal [ru

How Types of Organisational Culture Shapes Successful Start-ups within Malaysia

OpenAIRE

Kuah, Shen Yang

2016-01-01

Start-ups is the new wave of firms which are now mushrooming around Malaysia. However, as this wave is still at its infancy the success rate of start-ups in Malaysia is extremely low. It has been long established that organisational culture does indeed effect the performance of a firm, however there haven’t been any reports on the effect of organisational culture on the success of start-ups. The objective of this report is to investigate how different types of organisational cultures contribu...

Start-up test of Fukushima Daini Nuclear Power Station Unit No.3

International Nuclear Information System (INIS)

Inomata, Toshio; Umezu, Akira; Kajikawa, Makoto; Koibuchi, Hiroshi; Netsu, Nobuhiko.

1986-01-01

In Unit 3 of the Fukushima Nuclear Power Station II (daini), a BWR power plant of output 1,100 MW, commercial operation was started in June 1985. Its start-up test was finished successfully in about nine months. That is, new equipments introduced were demonstration tested. Though the items of testing are increased, the start-up test took short time, resulting in construction period only 54.7 months of the Unit 3, the shortest in the world. During the test, there was no scramming other than the planned. Described are the following: an outline of the Unit 3, the items of its improvement and standardization, including the new equipments, preparations for the start-up test, the start-up test and its evaluation. (Mori, K.)

Model citizens. Outsourcing helps start-up Medicare HMO.

Science.gov (United States)

Slavic, B; Adami, S

1999-04-01

Health Plans of Pennsylvania (HPP), the managed care arm of Crozer-Keystone Health System, in Media, Pa. Selecting the information systems and building the infrastructure to support the start-up of a new Medicare HMO product. HPP chose to outsource the information systems needed to integrate all the components of managed care administration into a cost-effective and cohesive program. Because of its aggressive programming and start-up of the MedCarePlus product offering, HPP became the first plan in the country to submit Medicare claims data electronically for encounter reporting to the Health Care Financing Administration (HCFA). "Through an integrated team approach, an organization truly can benefit from the economies of scale gained through outsourcing."

Female Hires and the Success of Start-up Firms

OpenAIRE

Weber, Andrea; Zulehner, Christine

2009-01-01

In this paper we investigate the relationship between females among the first hires of start-up companies and business success. Our results show that firms with female first hires have a higher share of female workers at the end of the first year after entry. Further, we find that firms with female first hires are more successful and stay longer in the market. We conclude that our results support the hypothesis that gender-diversity in leading positions is an advantage for start-up firms.

>venture>: Support for Early Stage Start-ups and Potential Entrepreneurs.

Science.gov (United States)

Kauz, Lukas

2014-12-01

>venture>, the leading Swiss-wide business plan competition, is an ideal partner for young start-ups and entrepreneurs. For the upcoming tenth anniversary edition the competition will receive an update. Building upon a successful base of the past nine editions and equipped with contemporary networking events and more know-how transferring seminars, >venture> will fit even better into the Swiss start-up ecosystem.

Start-up of a drinking water biofilter

DEFF Research Database (Denmark)

Ramsay, Loren; Søborg, Ditte; Breda, Inês Lousinha Ribeiro

When virgin filter media is placed in drinking water biofilters, a start-up period of some months typically ensues. During this period, the necessary inorganic coating and bacterial community are established on the filter medium, after which the treated water complies with drinking water criteria...

Start-up of anaerobic digestion of source-sorted organic municipal solid waste

International Nuclear Information System (INIS)

Maroun, Rania

2004-01-01

Municipal solid waste (MSW) disposal is a major environmental concern worldwide. Among the environmentally sound technologies for the treatment of MSW, composting in the form of anaerobic digestion (AD) appears as a suitable alternative that offers the advantage of rapid stabilization of organic matter, reduction in waste volume, production of methane, and minimal environmental impacts in comparison to land filling and incineration. Yet, although outstanding advances in anaerobic digestion of solid substrate have been made in the last 10 years, some development areas are lagging, including the fast and reliable process start-up in terms of type of inocula and overall start-up strategies. The present study investigates the start-up and operation of bench-scale anaerobic digesters treating the source-sorted organic fraction of municipal solid waste. The experimental program consisted of starting up two digesters in parallel. Three consecutive interventions in the start-up program were implemented to achieve steady state. Start-up was relatively slow indicating the seed obtained from an operating anaerobic wastewater treatment plant was not suitable. The use of cattle manure together with effluent dilution reduced the acclimation period (Author.)

A qualitative study of the challenges related to the development of product enabled services in technology driven start-ups

DEFF Research Database (Denmark)

Pedersen, Søren; Tanev, Stoyan; Ma, Zheng

of products and services to meet specific customer demands, thus generating additional value. This paper examines technology-based start-ups’ attitude towards the development of hybrid offerings as part of their business differentiation and positioning strategies. The main research question is answered within...... that start-ups have limited human and financial resources that is often combined with lacking business and commercialization knowledge. The screening criteria from the new venture funding organisation appear to be very much product focused, as the tangibility of the products, as compared to services, makes...... it easier to make selection decisions. By basing their selection criteria on a customerdominant logic, the funding organisation can better support start-ups to embark onto the right competitive path from the very beginning. This would help the start-ups in the design and development of integrated hybrid...

Practical Considerations of the Start-up Procedure for an Active Capacitor

DEFF Research Database (Denmark)

Wang, Haoran; Wang, Qian; Geng, Tao

2017-01-01

Capacitive DC links provide the only low-impedance current path connected with an input source during the start-up of many voltage source converters. A soft-start circuit is usually implemented to limit the inrush current. A two-terminal active capacitor is recently proposed which can directly...... replace conventional passive capacitors in DC links, with reduced cost or size for a given application. The active capacitor has the same level of convenience with two power terminals only as a passive capacitor. This paper proposes two start-up schemes for the active capacitor to overcome the drawbacks...... of existing methods previously widely used for passive capacitors. One scheme is based on a trade-off design between the start-up performance and the component sizing of the active capacitor. The other scheme is based on either an additional bypass switch together with the existing soft-start circuit...

Organising a conference? Think about what you can do for start-ups!

CERN Multimedia

David Mazur

2016-01-01

ICTR-PHE 2016 welcomed 16 exhibitors and sponsors as part of its industrial exhibition. If you have ever (co-)organised a large scientific conference, you almost certainly have your own list of major industrial actors who could be interested in becoming exhibitors or sponsors.   The six start-ups present at ICTR-PHE 2016 – Oncoradiomics, Colnec Health, Dixit Solutions, e-Learning4Health, I-See Computing and SmART Scientific Solutions (not pictured). (Image: Salvatore Fiore) ICTR-PHE has shown that scientific conferences can have a catalysing role in transforming young start-ups and spin-off companies into the key industrial players of tomorrow. A special start-up corner was provided in the industrial exhibition, where small stands were made available for a modest fee to start-ups and spin-off companies in fields relevant to the conference theme, together with a 5-minute timeslot for a pitch to the audience. Six start-ups, from the Netherlands, Italy and France...

Model based analysis of the time scales associated to pump start-ups

Energy Technology Data Exchange (ETDEWEB)

Dazin, Antoine, E-mail: antoine.dazin@lille.ensam.fr [Arts et métiers ParisTech/LML Laboratory UMR CNRS 8107, 8 bld Louis XIV, 59046 Lille cedex (France); Caignaert, Guy [Arts et métiers ParisTech/LML Laboratory UMR CNRS 8107, 8 bld Louis XIV, 59046 Lille cedex (France); Dauphin-Tanguy, Geneviève, E-mail: genevieve.dauphin-tanguy@ec-lille.fr [Univ Lille Nord de France, Ecole Centrale de Lille/CRISTAL UMR CNRS 9189, BP 48, 59651, Villeneuve d’Ascq cedex F 59000 (France)

2015-11-15

Highlights: • A dynamic model of a hydraulic system has been built. • Three periods in a pump start-up have been identified. • The time scales of each period have been estimated. • The parameters affecting the rapidity of a pump start-up have been explored. - Abstract: The paper refers to a non dimensional analysis of the behaviour of a hydraulic system during pump fast start-ups. The system is composed of a radial flow pump and its suction and delivery pipes. It is modelled using the bond graph methodology. The prediction of the model is validated by comparison to experimental results. An analysis of the time evolution of the terms acting on the total pump pressure is proposed. It allows for a decomposition of the start-up into three consecutive periods. The time scales associated with these periods are estimated. The effects of parameters (angular acceleration, final rotation speed, pipe length and resistance) affecting the start-up rapidity are then explored.

Effects of entrepreneurial orientation on start-up success: A gender perspective

Directory of Open Access Journals (Sweden)

Daisy Mui Hung Kee

2018-06-01

Full Text Available This paper examines the extent to which gender influences on the practice of Entrepreneurial Orien-tation (EO on Start-up Success. This study was conducted among Spin-off and Symbiosis Com-pany (SSC from all sectors in Peninsular Malaysia. Despite the remarkable research on EO and Start-up firms, there is a missing link on how gender provides different perspectives of EO practic-es among SSC, especially in Malaysia. A total of 120 SSC was chosen and the results show that EO was statistically related to Start-up Success and unveiled the magnitude of change that gender possesses in improving the relationship between EO practice and Start-up Success. The major implication of this study presents the unique contribution of gender in motivating SSC owners to engage in EO. Also, the difference of gender perceptions in business provides a variety of untapped opportunities in terms of entrepreneurial-related practices as different gender perceived different needs and capabilities. Future research is suggested to explore this phenomenon more extensively and develop a comprehensive model for the gender analysis. In brief, the discussion in this paper would help to strengthen the body of knowledge on Entrepreneurship and act as a future reference on SSC, EO, and Start-up Success.

The role of relationships in start-up development

DEFF Research Database (Denmark)

Mattsson, Jan; Helmersson, Helge; Standing, Craig

2017-01-01

Relationships are important in the business start-up phase for a variety of reasons. Internal relationships can support knowledge exchange that determines the business model development and external relationships can facilitate a wide range of opportunities, support and insights. The paper explains...... the key relationships experienced by the founding team of a recently formed Swedish digital trading platform. Data were gathered through a self-reporting diary approach based on the Critical Incident Technique format and texts were analysed by the Pertex text-analytic software. The findings explain how...... important relationships were formed during the initial start-up period targeting international expansion. Interaction with early adopters enabled a rapid evolution of the business platform with the aim to build a community of users to support development....

76 FR 50887 - Elections Regarding Start-Up Expenditures, Corporation Organizational Expenditures, and...

Science.gov (United States)

2011-08-17

... begins an active trade or business, an amount equal to the lesser of (1) the amount of the start-up... begins. All start-up expenditures that relate to the active trade or business are considered in... active trade or business to which the expenditures relate begins. The election either to amortize start...

A novel start-up procedure for natural-circulation boiling water reactors

International Nuclear Information System (INIS)

Annalisa Manera; Frank Schaefer

2005-01-01

Valves). In this case steam is generated due to flashing at high pressure. The simulation by means of TRACG shows that no flow oscillations occur during the transition from single- to two-phase operation. A similar start-up procedure is simulated by Cheng and coauthors [4] by means of the code RAMONA-4B. They find contradicting results compared to the one obtained by Cheung and Rao. However, RAMONA-4B cannot predict the occurrence of flashing at low pressures, since a single average system pressure is used by this code to calculate thermodynamic properties of water and steam in the system. Therefore, the results obtained by this code are meaningless with regard to the start-up of natural circulation two-phase systems. In the present work a novel start-up procedure will be illustrated which does not require any additional system and in which there is no necessity for an abrupt steam production at high pressure [5], as in the procedure of Cheung and Rao. In the procedure proposed in this work, the reactor vessel is pressurized by means of steam produced in the reactor vessel itself, but outside the core and riser section. In this way, the system can be pressurized while the reactor still operates in single-phase conditions, thus without occurrence of flashing-induced flow oscillations. At the same time, a smooth steam production and pressurization of the system is achieved. The feasibility of the intermediate state in which steam is produced in the reactor vessel while the circulation in core and riser sections remains single-phase has been already proved during an experimental campaign performed at the large-scale facility PANDA. The procedure is simulated by means of the ATHLET code, developed by GRS (Germany). This code has been successfully qualified against low-pressure flashing-induced instabilities within the framework of the EU project NACUSP. (authors)

Start up of the Tandem Accelerator in the Ezeiza Atomic Center

International Nuclear Information System (INIS)

Bianchini, R.; Consorti, S.; Roldan, M.; Llovera, R.; Arenilla, P.; Alvarez, D.E.; Ugarte, R.

2010-01-01

A High Voltage tandem electrostatic accelerator FN model was installed and started up by the Nuclear Regulatory Authority (ARN) on the campus of Ezeiza Atomic Center. Subsequently, the facility was transferred to the National Atomic Energy Commission for a new start up, re-engineering, maintenance, and operation [es

Optimization of steam-vortex plasma-torch start-up

Science.gov (United States)

Mikhailov, B. I.

2011-12-01

We propose a new optimal method of steam-vortex plasma-torches start-up; this method completely prevents the danger of water steam condensation in the arc chamber and all undesirable consequences of it.

Consideration of a non-baked start-up of a synchrotron light source

International Nuclear Information System (INIS)

Hori, Y.; Kobayashi, M.

1996-01-01

Vacuum baking of large complex uhv devices, such as synchrotron light sources, requires both careful design and consideration of potential problems regarding the operation and maintenance of the device. Intense synchrotron irradiation can be utilized for degassing; it is indeed necessary to achieve the required operating pressure in most light sources. To examine a non-baked start-up, the outgassing of non-baked chambers by SR irradiation was measured. Also, a non-baked start-up was carried out at the Photon Factory ring. Both results demonstrate the feasibility of a non-baked start-up of a light source. The experiments and results are described, together with several other problems which must be solved for a non-baked start-up. (Author)

Starting-up sequence of the AWEC-6 0 wind turbine

International Nuclear Information System (INIS)

Avia, F.; Cruz, M. de la

1991-01-01

One of the most critical status of the wind turbines operation is the starting-up sequence and the connection to the grid, due to the actuating loads that could be several times the loads during operation at rated conditions. Due to this fact, the control strategy is very important during the starting-up sequence in order to minimize the loads on the machine. For this purpose it is necessary to analyze the behaviour of the wind turbine during that sequence in different wind conditions and machine conditions This report shows the graphic Information about fifty starting-up sequences of the AWEC-60 wind turbine of 60 m diameter and 1200 kW of rated power, recorded in April 1991 and covering all the operation range between cut-in and cut-out wind speed. (Author) 2 refs

An analysis of reactivity prediction during the reactor start-up process

International Nuclear Information System (INIS)

Bajgl, Josef; Krysl, Vaclav; Svarny, Jiri

2015-01-01

The different VVER-440 core fuel loadings subcriticality evaluations are performed during the start-up process by boron dilution or control assembly withdrawn by macrocode MOBY-DICK calculations. The dynamic reactivity and quasicritical reactivity are compared and sensitivity of reactivity prediction at the low boundary of start-up interval (ρ = -0,01) has been provided on the basis of different modelling of ionization chamber (IC) response calculation. Special attention is paid to the impact of power distribution and spontaneous fission distribution form factor on IC response correction during control assembly movement. Precision and robustness of different corrections of IC signal processing in real core start-up processed IC signals was evaluated.

The start-up processes of academic spin-offs and non-academic ventures

OpenAIRE

Roininen, Sari

2006-01-01

New and small firms are important for the national economic growth, and hence there is a growing interest among policy makers and researchers in understanding the start-up processes among new ventures in order to facilitate more new venture creations. Prior research addressing new ventures' start-up processes focus mainly on the individual behind the venture or different activities in the start-up process. The overall purpose of this study is to increase the understanding of new venture s...

Start-up of a UASB effluent treatment plant on distillery wastewater ...

African Journals Online (AJOL)

This paper reports on the seasonal operation of a UASB treatment plant treating a distillery wastewater stream with particular focus on seasonal start-up conditions after the first process commissioning. The start-up period was typically one week before process stability could be achieved. It is recommended that the loading ...

Help Wanted: Exploring the Value of Entrepreneurial Mentoring at Start-Up

Science.gov (United States)

Brodie, Jacqueline; Van Saane, Sebastiaan Huib; Osowska, Renata

2017-01-01

The purpose of the research presented in this article was to investigate the added value of mentoring for entrepreneurs during the start-up phase. This small-scale exploratory research focused on five start-up entrepreneurs in Scotland to determine the entrepreneurs' perceptions regarding the "added" value of their mentoring support. To…

Navigating the Interface between Design Education and Fashion Business Start-up

Science.gov (United States)

Mills, Colleen E.

2012-01-01

Purpose: The purpose of this paper is to address the interface between design education and business start-up in the designer fashion industry (DFI) and provide a new framework for reflecting on ways to improve design education and graduates' business start-up preparedness. Design/methodology/approach: This interpretive study employed…

26 CFR 1.195-1T - Election to amortize start-up expenditures (temporary).

Science.gov (United States)

2010-04-01

... business, or $5,000 (reduced (but not below zero) by the amount by which the start-up expenditures exceed... beginning with the month in which the active trade or business begins. All start-up expenditures that relate to the active trade or business are considered in determining whether the start-up expenditures...

A Boom Time for Education Start-Ups

Science.gov (United States)

DeSantis, Nick

2012-01-01

Harsh economic realities mean trouble for college leaders. But where administrators perceive an impending crisis, investors increasingly see opportunity. In recent years, venture capitalists have poured millions into education-technology start-ups, trying to cash in on a market they see as ripe for a digital makeover. And lately, those wagers have…

Comparing Non-Steady State Emissions under Start-Up and Shut-Down Operating Conditions with Steady State Emissions for Several Industrial Sectors: A Literature Review

Directory of Open Access Journals (Sweden)

Juwairia Obaid

2017-02-01

Full Text Available This study investigates the emissions of various industrial facilities under start-up, shut-down, and normal operations. The industries that have been investigated include power and/or heat generation, energy-from-waste generation, nuclear power generation, sulphuric acid production, ethylene production, petrochemical production, and waste incineration. The study investigated multiple facilities worldwide for each of these industrial categories. The different potential contaminants characteristic of each industry type have been investigated and the emissions of these contaminants under non-steady state have been compared to the steady state emissions. Where available, trends have been developed to identify the circumstances, i.e., the industrial sector and contaminant, under which the assessment and consideration of emissions from start-up and shut-down events is necessary for each industry. These trends differ by industrial sector and contaminant. For example, the study shows that sulphur dioxide (SO2 emissions should be assessed for the start-up operations of sulphuric acid production plants, but may not need to be assessed for the start-up operations of a conventional power generation facility. The trends developed as part of this research paper will help air permit applicants to effectively allocate their resources when assessing emissions related to non-steady state operations. Additionally, it will ensure that emissions are assessed for the worst-case scenario. This is especially important when emissions under start-up and shut-down operations have the potential to exceed enforceable emission limits. Thus, assessing emissions for the worst-case scenario can help in preventing the emissions from adversely impacting public health and the environment.

First physical start-up for the first pulsed reactor in China

International Nuclear Information System (INIS)

Huang Wenlou; Tan Rilin; Xie Yuqi; Chai Songshan; Li Yingfa; He Qianming; Zhou Bin

1993-01-01

The characteristics and the test results of initial loading fuel and first physical start-up for the first pulsed reactor in China (PRC-1) are described. Safe measure to ensure safety of first physical start-up are also described. The experiments show that performances of PRC-1 are in accord with design requirements

Leadership toward Creativity in Virtual Work in a Start-Up Context

Science.gov (United States)

Humala, Iris Annukka

2015-01-01

Purpose: This paper aims to better understand how to lead toward creativity in virtual work in a start-up context. Design/methodology/approach: The study investigates the participants' experiences about the learning challenges in leadership toward creativity in virtual work in a start-up company and the meanings attributed to their experiences,…

Business Models for Start up Business

OpenAIRE

Boban, Nitin

2010-01-01

Gamingdom is a new start up venture that provides online gaming service utilising the latest cloud computing technology. The high demand, popularity and exponential growth in the number of gaming enthusiasts and the market have brought about this innovative idea. This new venture aims to provide an easy method of gaming through the internet without heavy expenses on hardware and software and also minimising the existing high rate of piracy. A business model is an essential tool for buildin...

Plyometric Long Jump Training With Progressive Loading Improves Kinetic and Kinematic Swimming Start Parameters.

Science.gov (United States)

Rebutini, Vanessa Z; Pereira, Gleber; Bohrer, Roberta C D; Ugrinowitsch, Carlos; Rodacki, André L F

2016-09-01

Rebutini, VZ, Pereira, G, Bohrer, RCD, Ugrinowitsch, C, and Rodacki, ALF. Plyometric long jump training with progressive loading improves kinetic and kinematic swimming start parameters. J Strength Cond Res 30(9): 2392-2398, 2016-This study was aimed to determine the effects of a plyometric long jump training program on torque around the lower limb joints and kinetic and kinematics parameters during the swimming jump start. Ten swimmers performed 3 identical assessment sessions, measuring hip and knee muscle extensors during maximal voluntary isometric contraction and kinetic and kinematics parameters during the swimming jump start, at 3 instants: INI (2 weeks before the training program, control period), PRE (2 weeks after INI measurements), and POST (24-48 hours after 9 weeks of training). There were no significant changes from INI to PRE measurements. However, the peak torque and rate of torque development increased significantly from PRE to POST measurements for both hip (47 and 108%) and knee (24 and 41%) joints. There were significant improvements to the horizontal force (7%), impulse (9%), and angle of resultant force (19%). In addition, there were significant improvements to the center of mass displacement (5%), horizontal takeoff velocity (16%), horizontal velocity at water entrance (22%), and peak angle velocity for the knee (15%) and hip joints (16%). Therefore, the plyometric long jump training protocol was effective to enhance torque around the lower limb joints and to control the resultant vector direction, to increase the swimming jump start performance. These findings suggest that coaches should use long jump training instead of vertical jump training to improve swimming start performance.

Construction, start-up and operation of a continuously aerated ...

African Journals Online (AJOL)

scale SHARON reactor are discussed, along with the construction of the reactor. Special attention is given to the start-up in view of possible toxic effects of high nitrogen concentrations (up to 4 000 mgN·ℓ-1) on the nitrifier population and ...

Digital Marketing concept and strategy for a Finnish Start-up, Case: Sofi Filtration

OpenAIRE

Buda, Constantin

2014-01-01

The case company is a Finnish start-up company that operates in the industrial water filtration business and who aims to increase its brand awareness and generate more sales leads. The aim of this study is to provide effective and inexpensive tools for Sofi Filtration to engage its target audience and grow its business by being acknowledged as an expert in industrial water filtration. The thesis is part of the International Business Management program offered by HAAGA-HELIA University of ...

The Impact of Start-up Grants on Firm Performance in Estonia

Directory of Open Access Journals (Sweden)

Siret Vildo

2013-01-01

Full Text Available As in economic theory start-up enterprises have been seen as important sources of growth, the government support measures to enterprises have been a common practice around the world for decades. As the governmental support to enterprises is often of a considerable amount of money there is a need to assess its efficiency. In the present article we study the impact of Estonian start-up grants distributed in 2002 and 2003 on various indicators of firm performance with econometric methods, namely propensity score matching. We use the data from the Estonian Business Register in order to study the impact of start-up grants on various economic indicators like the number of employees, turnover, equity, fixed assets and firm survival. The results showed that the start-up grants proved to affect positively the number of employed people and turnover, yet the impact on productivity was negative. One implication of the study is that it is difficult to achieve different goals to the same extent with a single governmental grant

CERN confident of LHC start-up in 2007

CERN Document Server

2007-01-01

"Delegates attending the 140th meeting of CERN Council heard a confident report from the Laboratory about the scheduled start-up of the world's highest energy particle accelerator, the Large Hadron Collier (LHC), in 2007." (1 page)

Program of RA reactor start-up to nominal power

International Nuclear Information System (INIS)

1959-01-01

The zero start-up program is followed by the program of RA reactor start-up to nominal power. This program is described in detail and includes the following measurements: radiation characteristics at the exit of the channels; gamma and fast neutron dose distribution in the reactor; influence of absorbers on the reactivity; temperature effect; absolute flux and calibration of ionization chambers; xenon effect; thermal and hydraulics; dosimetry around the reactor; neutron flux in the reactor core and in the reactor hall; heavy water level; thermal characteristics after shutdown. A list of measuring devices and instrumentation is included with the detailed action plan and list of responsible staff members

Start-up Success in a Small Island State: A Study among Entrepreneurs in Malta

Directory of Open Access Journals (Sweden)

Leonie Baldacchino

2008-05-01

Full Text Available This study focuses on entrepreneurs in the small island state of Malta and investigates whether starting up and running an enterprise is facilitated or hindered by being in a small island environment. Specifically it asks (1 whether being on a small island, on the periphery of a major market facilitates or hinders entrepreneurship and start-up success; (2 whether Malta’s cultural context and enterprise environment affect entrepreneurship and start-up success; (3 what the key success factors among Maltese start-ups are; and (4 how are creativity and innovation reflected in Maltese start-ups. Qualitative research among 13 start-ups is supported by telephone-based research among a sample of 90 respondents. Findings contribute to the pool of business expertise and context-specific information from small island states that is often missing from the international literature.

CERN confident of LHC start-up in 2007

CERN Document Server

Vanden Broeck, Renilde

2007-01-01

"Delegates attending the 140th meeting of CERN Council today heard a confident report from the Laboratory about the scheduled start-up of the world's highest energy particle accelerator, the Large Hadron Collier (LHC) in 2007. (1/2 page)

CERN confident of LHC start-up in 2007

CERN Multimedia

2006-01-01

"Delegates attending the 140th meeting of CERN Council today heard a confident report from the Laboratory about the scheduled start-up of the world's highest energy particle accelerator, the Large Hadron Collider (LHC) in 2007." (1/2 page)

Classifier utility modeling and analysis of hypersonic inlet start/unstart considering training data costs

Science.gov (United States)

Chang, Juntao; Hu, Qinghua; Yu, Daren; Bao, Wen

2011-11-01

Start/unstart detection is one of the most important issues of hypersonic inlets and is also the foundation of protection control of scramjet. The inlet start/unstart detection can be attributed to a standard pattern classification problem, and the training sample costs have to be considered for the classifier modeling as the CFD numerical simulations and wind tunnel experiments of hypersonic inlets both cost time and money. To solve this problem, the CFD simulation of inlet is studied at first step, and the simulation results could provide the training data for pattern classification of hypersonic inlet start/unstart. Then the classifier modeling technology and maximum classifier utility theories are introduced to analyze the effect of training data cost on classifier utility. In conclusion, it is useful to introduce support vector machine algorithms to acquire the classifier model of hypersonic inlet start/unstart, and the minimum total cost of hypersonic inlet start/unstart classifier can be obtained by the maximum classifier utility theories.

Soft start technique for diesel generator sets

International Nuclear Information System (INIS)

Fredlund, Lars

1986-01-01

A diesel motor in a nuclear power plant should be of a well-proven design. It is designed for long periods of trouble-free duty, but not for the frequent and rapid test starts called for by the technical specifications. In order to decrease the dynamic forces and thermal stresses, a soft-start scheme has been implemented. By limiting the fuel injection the diesel generator will reach full speed in appr. 30 seconds. The fuel limiter is a pneumatic cylinder which mechanically limits the travel of the terminal shaft of the governor. (author)

Soft start technique for diesel generator sets

Energy Technology Data Exchange (ETDEWEB)

Fredlund, Lars [Swedish State Power Board, Ringhals Nuclear Power Plant, S-430 22, Vaeroebacka (Sweden)

1986-02-15

A diesel motor in a nuclear power plant should be of a well-proven design. It is designed for long periods of trouble-free duty, but not for the frequent and rapid test starts called for by the technical specifications. In order to decrease the dynamic forces and thermal stresses, a soft-start scheme has been implemented. By limiting the fuel injection the diesel generator will reach full speed in appr. 30 seconds. The fuel limiter is a pneumatic cylinder which mechanically limits the travel of the terminal shaft of the governor. (author)

Innovative start-ups and young entrepreneurs: Definition of venturem capital and findings from Switzerland

Directory of Open Access Journals (Sweden)

Simon Zaby

2017-02-01

Full Text Available This paper aims to investigate success factors of innovative start-up firms from the perspective of young start-up managers. Which key factors did they experience before and since the foundation of their company? The experience from the quite young Swiss start-up scene pro-vides important insights to entrepreneurs and policy-makers in emerging countries that cur-rently face the necessity of building up a start-up environment. One part of the data has been collected by the author, the other part originates from the Swiss Venture Capital Database (total sample size: 306. The results show a significant role of venture capital financing for the success of innovative start-ups. Interestingly, this is to some extent because the start-ups see various additional benefits from venture capitalists involved in their firm. Thus, the findings shed new light on a proper definition of venture capital that should not solely focus on the flow of funds.

Ophthalmic Start-Up Chief Executive Officers' Perceptions of Development Hurdles.

Science.gov (United States)

Stewart, William C; Nelson, Lindsay A; Kruft, Bonnie; Stewart, Jeanette A

2018-01-01

To identify current challenges facing ophthalmic pharmaceutical start-ups in developing new products. Surveys were distributed to the chief executive officer (CEO) or president of ophthalmic start-ups. The survey attracted 24 responses from 78 surveys distributed (31%). The CEOs stated that a lack of financial capital (n = 18, 75%), FDA regulations (n = 6, 25%), and failure to meet clinical endpoints (n = 6, 25%) were their greatest development hurdles. Risk aversion to medicines in early development (n = 18, 75%), mergers and acquisitions reducing corporate choice for licensing agreements (n = 7, 29%), the emergence of large pharmaceutical-based venture capital funding groups (n = 12, 50%), and the failure of many large pharmaceutical companies to develop their own medicines (n = 10, 42%) were noted as recent prominent trends affecting fundraising. The study suggests that development funding, regulatory burden, and meeting clinical endpoints are the greatest development challenges faced by ophthalmic start-up CEOs. © 2017 S. Karger AG, Basel.

CONTRACT FOLLOW UP TRAINING

CERN Multimedia

Technical Training; Tel. 74460

2001-01-01

SPL is organizing Training Sessions on the Contract Follow Up application. CFU is a Web based tool, developped and supported by the Administrative Information Services. It allows the creation of Divisional Requests and the follow up of their processing, from the Market Survey to the Invitation to Tender or Price Enquiry, approval by the Finance Committee, up to the actual signature of a Contract, acccording to the CERN Purchasing procedures. It includes a document management component. It also provides link with other AIS applications such as BHT and EDH. The course is primarily intended for DPOs, Contract Technical responsibles in the division and their assistants, but is beneficial to anybody involved in the follow up of such Purchasing Procedures. This course is free of charge, but application is necessary. The details of the course may be found at http://training.web.cern.ch/Training/ENSTEC/P2001/Bureautique/cfu4_f.htm General information of CFU may be found at http://ais.cern.ch/apps/cfu/ The dates of t...

Use of coaxial plasma guns to start up field-reversed-mirror reactors

International Nuclear Information System (INIS)

Smith, A.C. Jr.; Carlson, G.A.; Eddleman, J.L.; Hartman, C.W.; Neef, W.S. Jr.

1980-01-01

Application of a magnetized coaxial plasma gun for start-up of a field-reversed-mirror reactor is considered. The design is based on preliminary scaling laws and is compared to the design of the start-up gun used in the Beta II experiment

Relationship Between Vertical Jump Height and Swimming Start Performance Before and After an Altitude Training Camp.

Science.gov (United States)

García-Ramos, Amador; Padial, Paulino; de la Fuente, Blanca; Argüelles-Cienfuegos, Javier; Bonitch-Góngora, Juan; Feriche, Belén

2016-06-01

This study aimed (a) to analyze the development in the squat jump height and swimming start performance after an altitude training camp, (b) to correlate the jump height and swimming start performance before and after the altitude training period, and (c) to correlate the percent change in the squat jump height with the percent change in swimming start performance. Fifteen elite male swimmers from the Spanish Junior National Team (17.1 ± 0.8 years) were tested before and after a 17-day training camp at moderate altitude. The height reached in the squat jump exercise with additional loads of 0, 25, 50, 75, and 100% of swimmers' pretest body weight and swimming start performance (time to 5, 10, and 15 m) were the dependent variables analyzed. Significant increases in the jump height (p ≤ 0.05; effect size [ES]: 0.35-0.48) and swimming start performance (p jump height before training (r = -0.56 to -0.77) and after training (r = -0.50 to -0.71). The change in the squat jump height was inversely correlated with the change in the start time at 5 m (r = -0.47), 10 m (r = -0.73), and 15 m (r = -0.62). These results suggest that altitude training can be suitable to enhance explosive performance. The correlations obtained between the squat jump height and start time in the raw and change scores confirm the relevance of having high levels of lower-body muscular power to optimize swimming start performance.

Experiential learning and critical reflection as a tool for transfer of business knowledge: an empirical case study of a start-up simulation intervention for nascent entrepreneurs

Directory of Open Access Journals (Sweden)

Ingrid Le Roux

2013-07-01

Full Text Available This paper investigates the impact of venture start-up simulation on participants’ learning; it is concerned specifically with the relationship between experiential learning theory and critical reflection within venture start-up simulation. This was carried out in empirical investigation of a simulation training game used to train entrepreneurs in a formal setting. The findings show significant improvement in their knowledge of finance, marketing operations and information use. Participants reported increased skills and intended behavioural changes in their own ventures. Finally, there was empirical support for the fact that critical reflection during experiential learning can greatly improve the standard of learning and has an immediate effect on  participants’ behaviour.

Internal currents in PEMFC during start-up or shut-down

Energy Technology Data Exchange (ETDEWEB)

Maranzana, G.; Lottin, O.; Moyne, C.; Dillet, J.; Lamibrac, A.; Mainka, J.; Didierjean, S. [Nancy Univ. - CNRS (France). LEMTA

2010-07-01

Experiments show that the internal currents that occur during PEMFC start-up can reach up to 1 Acm{sup -2}. This is far more important than the expected order of magnitude of the current densities associated with carbon oxidation, which is only of a few mAcm{sup -2}. The predominant phenomenon that explains the internal currents is the charge and discharge of the double layer capacitances. A simple model with constant values of the electric parameters yields numerical results close to the experimental ones. It also explains the transient voltage rise (over the steady state open circuit voltage) that is sometimes observed experimentally shortly after the fuel cell start up. (orig.)

Electron Bernstein wave current drive in the start-up phase of a tokamak discharge

International Nuclear Information System (INIS)

Montes, A.; Ludwig, G.O.

1986-04-01

Current drive by electron Bernstein waves in the start-up phase of tokamak discharges is studied. A general analytical expression is derived for the figure of merit J/Pd associated with these waves. This is coupled with a ray tracing code, allowing the calculation of the total current generated per unit of incident power in realistic tokamak conditions. The resuts show that the electron Bernstein waves can drive substantial currents even at very low electron temperatures. (Author) [pt

The value of business incubation services for early stage start-ups

DEFF Research Database (Denmark)

Jakobsen, Brian; Tanev, Stoyan; Jensen, Søren

2017-01-01

of the needs of early stage start-ups since they: i) do not have a well-articulated business model but work towards establishing one; ii) operate under conditions of significantly high risks and uncertainties; and iii) have not developed the minimum viable set of partners that would enable them to demonstrate...... in specific incubation programs. The findings should contribute to existing literature within the topic of business-incubation, as well as provide managers of both incubators and start-ups with actionable insights about the ways of maximizing the value of incubation services.......The paper focuses on conceptualizing the value of business incubation services for early stage start-ups that are typical of university-based entrepreneurial ecosystems. The challenge of such conceptualization consists in two main issues. The first issue is taking into account the specificity...

The design of control algorithm for automatic start-up model of HWRR

International Nuclear Information System (INIS)

Guo Wenqi

1990-01-01

The design of control algorithm for automatic start-up model of HWRR (Heavy Water Research Reactor), the calculation of μ value and the application of digital compensator are described. Finally The flow diagram of the automatic start-up and digital compensator program for HWRR are given

Impact of reactor configuration on anammox process start-up: MBR versus SBR.

Science.gov (United States)

Tao, Yu; Gao, Da-Wen; Fu, Yuan; Wu, Wei-Min; Ren, Nan-Qi

2012-01-01

Anaerobic ammonium oxidation (anammox) is an energy saving biological nitrogen removal process which was limited to slow growth rate of anammox bacteria during start-up period. This study investigated the start-up of anammox process by a laboratory sequential batch reactor (SBR) for 218 days and subsequently modified the reactor as a membrane bioreactor (MBR) for 178 days. Modification of a SBR as MBR with installation of an external membrane module resulted in acceleration of specific anammox activity by 19 times. The acceleration of specific anammox activity with MBR was further confirmed by starting-up another MBR for a 242 day period. Molecular microbial analyses showed that Candidatus "Brocadia anammoxidans" and Candidatus "Kuenenia stuttgartiensis" were the dominant species in the inocula and biomass developed in the reactor. The start-up with MBR appeared to be more effective than SBR for the enrichment of anammox bacteria due to high sludge retention property of MBR configuration. Copyright © 2011 Elsevier Ltd. All rights reserved.

Preliminary analysis of start up characteristics on SPWR with NESSY (Nuclear ship Engineering Simulation SYstem)

International Nuclear Information System (INIS)

Kusunoki, Tsuyoshi; Kyouya, Masahiko; Sako, Kiyoshi

1993-09-01

NESSY (Nuclear ship Engineering Simulation SYstem) has been developed to design advanced marine reactors. SPWR (System integrated PWR) has been designed by JAERI. It doesn't have control rod, and starts up by dilution of boron. we analyzed start up behavior of SPWR by NESSY, and evaluated the safety characteristics on start up and appropriate range of start up rate. (author)

MECANISMOS DE GERAÇÃO DE EMPREENDIMENTOS: AS ACELERADORAS DE START-UPS NO BRASIL

Directory of Open Access Journals (Sweden)

Amanda Luiza Soares Silva

2018-03-01

Full Text Available Aceleradoras de Start-ups são consideradas mecanismos de geração de empreendimentos. O objetivo geral do estudo é caracterizar as aceleradoras participantes do Programa Nacional de Aceleração de Start-ups – Start-up Brasil. Os principais resultados obtidos foram: perfil das start-ups selecionadas pelas aceleradoras, start-ups em áreas como educação, Tecnologia da Informação e Comunicação – TIC, saúde, economia criativa, entre outras; informações sobre a aceleradora, tais como locais de aceleração (Brasil, Estados Unidos da América – EUA e Suécia e quantidade de start-ups entre 3 e 130 em diversos estágios (pré-aceleradas, em aceleração, aceleradas e no portfólio; o investimento por start-up pode variar entre R$20.000,00 e R$3.000.000,00 e a participação acionária de 1%-40%, dependendo da aceleradora e de seus investidores internos e externos; e, as metodologias de aceleração possuem aspectos como mentoria, visitas técnicas em outros países, eventos, acesso a capital, networking e gestão de portfólios.

When does start-up innovation spur the gale of creative destruction?

OpenAIRE

Gans, Joshua S.; Hsu, David H.; Stern, Scott

2001-01-01

This paper is motivated by the substantial differences in start-up commercialization strategies observed across different high-technology sectors. Specifically, we evaluate the conditions under which start-up innovators earn their returns on innovation through product market competition with more established firms (such as in many areas of the electronics industry) as opposed to cooperation with these incumbents (either through licensing, strategic alliances or outright acquisition as observe...

Mathematical modeling and analysis of heat pipe start-up from the frozen state

International Nuclear Information System (INIS)

Jang, J.H.; Faghri, A.; Chang, W.S.; Mahefkey, E.T.

1989-08-01

The start-up process of a frozen heat pipe is described and a complete mathematical model for the start-up of the frozen heat pipe is developed based on the existing experimental data, which is simplified and solved numerically. The two-dimensional transient model for the wall and wick is coupled with the one-dimensional transient model for the vapor flow when vaporization and condensation occur at the interface. A parametric study is performed to examine the effect of the boundary specification at the surface of the outer wall on the successful start-up from the frozen state. For successful start-up, the boundary specification at the outer wall surface must melt the working substance in the condenser before dry-out takes place in the evaporator

Urbanization and start-up rates in different geographies: Belgium, the Netherlands and Sweden

OpenAIRE

Hans, Lianne; Koster, Sierdjan

2017-01-01

This study addresses the mediating role of settlement patterns in the relationship between urbanization and start-up activity. Places do not operate in a vacuum and to understand the effect of 'own' density on start-up patterns, we need to account for the urban spillovers or borrowed size that they may experience from other places nearby. The results can explain the empirical ambiguity in the relationship between urbanization and start-up patterns: the relationship between urbanization and st...

Reactor water quality degradation suppressing method upon reactor start up

International Nuclear Information System (INIS)

Maeda, Katsuharu.

1993-01-01

Preceding to reactor start-up, vacuum degree in a condenser is increased, and after the vacuum degree has been increased sufficiently, a desalting tower is inserted. Then, water feed to the reactor is started and the reactor is operated so that water is supplied gradually. Thus, dissolved oxygen in the feedwater and condensates is kept low and an entire organic carbon leaching rate from resins in the condensate desalting tower is reduced. Further, since feedwater is gradually supplied after the start-up, the entire organic carbon brought into the reactor is decomposed by heat and radiation and efficiently removed by a reactor coolant cleanup system. As a result, corrosion of stainless steel or the like is suppressed, as well as integrity of fuels can be maintained. Further, degradation of water quality can be suppressed effectively not by additionally putting the condensate desalting towers to in-service in accordance with the increase of the feedwater flow rate accompanying the power up but by previously putting the condensate desalting towers to in-service. (N.H.)

Start up testing for the secure automated fabrication line

International Nuclear Information System (INIS)

Gerber, E.W.; Benson, E.M.; Dahl, R.E.

1986-01-01

The Secure Automated Fabrication (SAF) Line has been designed and built by Westinghouse Hanford Company for the Department of Energy at the Hanford Site near Richland, Washington. The SAF Line will provide the capability for remote manufacture of fuel for Liquid Metal Reactors, and will supply fuel for the Fast Flux Test Facility (FFTF). The SAF process is highly automated and represents a major advancement in nuclear fuel manufacturing, offering significant improvements in product quality, productivity, safety, and accountability of Special Nuclear Materials. The construction phase of the project is complete, and testing has been initiated to accomplish start up of the plant for manufacture of FFTF fuel. This paper describes the test methodology used for SAF Line start up

Analysis of the IEA-R1 reactor start-up procedures - an application of the HazOp method

International Nuclear Information System (INIS)

Sauer, Maria Eugenia Lago Jacques

2000-01-01

An analysis of technological catastrophic events that took place in this century shows that human failure and vulnerability of risk management programs are the main causes for the occurrence of accidents. As an example, plants and complex systems where the interface man-machine is close, the frequency of failures tends to be higher. Thus, a comprehensive knowledge of how a specific process can be potentially hazardous is a sine qua non condition to the operators training, as well as to define and implement more efficient plans for loss prevention and risk management. A study of the IEA-R1 research reactor start-up procedures was carried out, based upon the methodology Hazard and Operability Study (HazOp). The analytical and qualitative multidisciplinary HazOp approach provided means to a comprehensive review of the reactor start-up procedures, contributing to improve the understanding of the potential hazards associated to deviations on performing this routine. The present work includes a historical summary and a detailed description of the HazOp technique, as well as case studies in the process industries and the use of expert systems in the application of the method. An analysis of 53 activities of the IEA-R1 reactor start-up procedures was made, resulting in 25 recommendations of changes covering aspects of the project, operation and safety of the reactor. Eleven recommendations have been implemented. (author)

Assessment of the plasma start-up in Wendelstein 7-X with neutral beam injection

International Nuclear Information System (INIS)

Gradic, D.; Dinklage, A.; Brakel, R.; McNeely, P.; Rust, N.; Wolf, R.; Osakabe, M.

2015-01-01

Plasma start-up by neutral beam injection was investigated for stellarators. A zero-dimensional collisional model was extended to evaluate the temporal evolution of the plasma start-up in a confining toroidal magnetic field. Inclusion of different beam energy components indicated a substantial effect due to the energy dependence of beam–gas collisions. Additional collision processes and particle equations were considered to simulate the plasma start-up in helium–hydrogen mixtures. The isotope effect between operation with hydrogen and deuterium beams was also investigated. As a major objective the conditions necessary for a plasma start-up with neutral beams in W7-X have been examined. The assessed beam configuration in W7-X was found not to allow plasma start-up by neutral beam injection alone. The model has been validated for experimental data from W7-AS and Large Helical Device. Quantitative predictions of this study show that the ratio of the beam–plasma interaction length and the plasma volume is an essential quantity for the successful plasma start-up with neutral beams. (paper)

Supervised learning with restricted training sets: a generating functional analysis

Energy Technology Data Exchange (ETDEWEB)

Heimel, J.A.F.; Coolen, A.C.C. [Department of Mathematics, King' s College London, Strand, London (United Kingdom)

2001-10-26

We study the dynamics of supervised on-line learning of realizable tasks in feed-forward neural networks. We focus on the regime where the number of examples used for training is proportional to the number of input channels N. Using generating functional techniques from spin glass theory, we are able to average over the composition of the training set and transform the problem for N{yields}{infinity} to an effective single pattern system described completely by the student autocovariance, the student-teacher overlap and the student response function with exact closed equations. Our method applies to arbitrary learning rules, i.e., not necessarily of a gradient-descent type. The resulting exact macroscopic dynamical equations can be integrated without finite-size effects up to any degree of accuracy, but their main value is in providing an exact and simple starting point for analytical approximation schemes. Finally, we show how, in the region of absent anomalous response and using the hypothesis that (as in detailed balance systems) the short-time part of the various operators can be transformed away, one can describe the stationary state of the network successfully by a set of coupled equations involving only four scalar order parameters. (author)

Start-up strategies for thermophilic anaerobic digestion of pig manure

International Nuclear Information System (INIS)

Moset, V.; Bertolini, E.; Cerisuelo, A.; Cambra, M.; Olmos, A.; Cambra-López, M.

2014-01-01

Sludge physicochemical composition, methane (CH 4 ) yield, and methanogenic community structure and dynamics using quantitative real-time polymerase chain reaction were determined after start-up of anaerobic digestion of pig manure. Eight thermophilic continuous stirred anaerobic digesters were used during 126 days. Four management strategies were investigated: a feedless and a non-feedless period followed by a gradual or an abrupt addition of pig manure (two digesters per strategy). During the first 43 days, VFA (volatile fatty acids) accumulations and low CH 4 yield were observed in all digesters. After this period, digesters recovered their initial status being propionic acid the last parameter to be re-established. Non-feedless digesters with an abrupt addition of pig manure showed the best performances (lower VFA accumulation and higher CH 4 yield). Differences in microbial orders and dynamics, however, were less evident among treatments. Hydrogenotrophic methanogenesis, Methanomicrobiales first and Methanobacteriales second, was the dominant metabolic pathway in all digesters. Further research is needed to clarify the role and activity of hydrogenotrophic methanogens during the recovery start-up period and to identify the best molecular tools and methodologies to monitor microbial populations and dynamics reliably and accurately in anaerobic digesters. - Highlights: • Four start-up strategies for thermophilic anaerobic digestion of pig manure were tested. • Physicochemical composition, methane yield and methanogenic community were determined. • During the first 43 days, a decline in reactor's performance occurred. • The best start-up strategy was non-feedless with an abrupt addition of pig slurry. • Hydrogenotrophic methanogenesis was the dominant metabolic pathway

Von Start-ups lernen - Methoden und Entwicklungsprozesse, die Jungunternehmen erfolgreich machen

Science.gov (United States)

Böhme, Eckhart

Die Start-up-Bewegung bringt beständig sog. Disruptoren hervor, die jede Branche betreffen und so gut wie keinen Lebensbereich auslassen. Diese Jungunternehmen, insbesondere aus der Softwarebranche, verfügen zwar nicht über Ressourcen wie etablierte Unternehmen, sie sind jedoch agil, "hungrig", können frei von "Ballast" agieren und treiben die Digitalisierung aller Branchen voran. Aber auch Start-ups können nicht einfach ungetestete Ideen in erfolgreiche Produkte oder Dienstleistungen umwandeln und ihren Erfolg dem Zufall überlassen. Erfolgreiche Jungunternehmen folgen vielmehr einem strukturierten Prozess, um marktgetestete Nutzenversprechen und Geschäftsmodelle zu entwickeln. Zunehmend adaptieren etablierte Unternehmen innovative Entwicklungsprozesse und Methoden. Die Fragestellung für Energieversorgungsunternehmen (EVUs) lautet, welche Methoden, Werkzeuge und Entwicklungsprozesse, die heute bei vielen Start-ups eingesetzt werden, sie aufgreifen können, um das Unternehmen gegenüber Disruptoren robust zu machen?

Our start-up could never have been successful

NARCIS (Netherlands)

Van Kranendonk, J.; De Leeuw, T.; Bonger, S.

2014-01-01

In July 2013, TU Delft alumnus Jan van Kranendonk and his business partner Thomas de Leeuw decided to discontinue their start-up company Sunuru. The reason was that customers were not interested in their ingenious solar project. Van Kranendonk spoke about his failure during the Failcon event in

Business incubator as a support measure for start-ups in Russia and Sweden. : Comparative analysis.

OpenAIRE

Kiseleva, Maria

2017-01-01

Growth and developing of start-ups plays an important role as starting new business is one of the indicator that shows the economy level of each country. At that time start-ups need support and one of such support institutions is business incubator who can provide all resources that start-ups need. Different studies exist about business incubator as a support measure and the role of them for start- ups, but there is a lack of studies in analyzing this topic in different business environments....

The Effect of an Altitude Training Camp on Swimming Start Time and Loaded Squat Jump Performance.

Science.gov (United States)

García-Ramos, Amador; Štirn, Igor; Padial, Paulino; Argüelles-Cienfuegos, Javier; De la Fuente, Blanca; Calderón, Carmen; Bonitch-Góngora, Juan; Tomazin, Katja; Strumbelj, Boro; Strojnik, Vojko; Feriche, Belén

2016-01-01

This study evaluated the influence of an altitude training (AT) camp on swimming start time and loaded squat jump performance. To accomplish this goal, 13 international swimmers (8 women, 5 men) were allocated to both the control (Sea Level Training, SLT) and experimental conditions (AT, 2320 m above sea level) that were separated by a one year period. All tests (15 m freestyle swimming start and loaded squat jumps with additional loads of 25%, 50%, 75%, and 100% of swimmers' body weight) were performed before and after a concurrent 3-week strength and endurance training program prescribed by the national coach. Following the SLT camp, significant impairments in swimming start times to 10 (+3.1%) and 15 m (+4.0%) were observed (P 0.05). Trivial changes in peak velocity were obtained during the loaded squat jump after both training periods (effect sizes: training high-living high strategy concurrent training of 3 weeks does not adversely affect swimming start time and loaded squat jump performance in high level swimmers, but further studies are necessary to assess the effectiveness of power-oriented resistance training in the development of explosive actions.

Start-up problem with an induction machine and a permanent magnet gear

DEFF Research Database (Denmark)

Frandsen, Tommy; Berg, Nick Ilsø; Holm, Rasmus Koldborg

2014-01-01

This paper presents the preliminary work conducted to design a magnetic gear (MG) integrated with a fan and driven by an grid connected induction machine (IM). A start-up problem with a MG, which occurs due to a high oscillating torque and a high breakdown torque of the IM when starting up directly...

Integrated Marketing Strategies of German Companies : Start-Ups vs. Global Brands

OpenAIRE

Kostin, Irina

2016-01-01

The purpose of this bachelor's thesis is to find out and analyze different marketing strategies of German fashion companies. The main part is comparing relatively young start-up companies to established companies and analyzing to what extent the strategies differ. The methodology used in this paper were semi-structured expert interviews with German start-up companies. The results were analyzed and compared to the secondary research on the big global German companies. The findings showed that ...

Start up and commercial operation of Laguna Verde nuclear power plant. Unit 1

International Nuclear Information System (INIS)

Torres Ramirez, J.F.

1991-01-01

Prior to start up of Laguna Verde nuclear power plant preoperational tests and start tests were performed and they are described in its more eminent aspects. In relation to commercial operation of nuclear station a series of indicator were set to which allow the measurement of performance in unit 1, in areas of plant efficiency and personal safety. Antecedents. Laguna Verde station is located in Alto Lucero municipality in Veracruz state, 70 kilometers north-northeast from port of Veracruz and a 290 kilometers east-northeast from Mexico city. The station consist of two units manufactured by General Electric, with a nuclear system of vapor supply also called boiling water (BWR/5), and with a system turbine-generator manufactured by Mitsubishi. Each unit has a nominal power of 1931 MWt and a level design power of 675 Mwe and a net power of 654 Electric Megawatts

Creating Start-up Companies around NCI Inventions | Poster

Science.gov (United States)

By Karen Surabian, Thomas Stackhouse, and Rose Freel, Contributing Writers, and Rosemarie Truman, Guest Writer The National Cancer Institute (NCI), led by the Technology Transfer Center (TTC),  the Avon Foundation, and The Center for Advancing Innovation have partnered to create a “first-of-a-kind” Breast Cancer Start-up Challenge.

Entrepreneurism from the ground up: Entrepreneurism, innovation, and responsiveness in a start-up university

Science.gov (United States)

Wong, Michael Paul Anthony

Colleges and universities are under increased pressure from internal and external constituencies for increased innovation and responsiveness. Entrepreneurial private industry models such as start-up businesses, corporate ventures and spin-off organizations have been recognized for their ability to quickly adapt to changing business environments and rapidly innovate to take advantage of new opportunities. This case study investigates these claims with regard to a start-up university founded with the identity of an entrepreneurial, interdisciplinary institution that prepares graduate level students for leadership careers as entrepreneurs in the bio-tech industry. By interviewing twenty-four administrators, faculty, and members of the Board of Trustees, including all but one of the founding full-time faculty, I present an "insider's" depiction of the lived experience of those most closely associated with the founding and subsequent institution building of this unique higher education organization. Initial chapters present a theory of higher education organizations, derived from Birnbaum (1988) and Bolman and Deal (1991), as driven by two primary tasks: resolving identity and establishing power and resources in relation to that identity. I also present Russell and Russell's (1992) theory of "entrepreneurial posture" in relation to a higher education organization. Subsequent chapters analyze the start-up university's environment, strategy, culture, and structure within the framework of the two primary organizational tasks and Russell and Russell's (1992) definition of an entrepreneurial organization.

Measuring the effectiveness of the women entrepreneurship programme on potential, start-up and established women entrepreneurs in South Africa

Directory of Open Access Journals (Sweden)

Melodi Botha

2013-04-01

Full Text Available The Women Entrepreneurship Programme (WEP was developed after a need had been identifiedfor such a training intervention. The WEP provides entrepreneurial and business management training to women entrepreneurs. This empirical paper measures the effectiveness of the WEP after the respondents had been through the training intervention. The sample consists of 180 women entrepreneurs, where 116 respondents form the experimental group and 64 respondents the control group. Factor analysis is presented and several statistical tests executed to present the statistically significant differences between the two groups in the sample. The findings highlight the WEP delegates’ acquisition of new entrepreneurial skills and knowledge. Furthermore, the respondents reported an increase in the number of employees, turnover, productivity and profit. It was statistically proven that the WEP is effective in training potential, start-up and established women entrepreneurs in South Africa.

Standardization of the time for the execution of HANARO start-up and shutdown procedures

International Nuclear Information System (INIS)

Choi, H. Y.; Lim, I. C.; Hwang, S. R.; Kang, T. J.; Youn, D. B.

2003-01-01

For the standardization of the time to execute HANARO start-up and shutdown procedures, code names were assigned to the individual procedures and the work time were investigated. The data recorded by the operators during start-up and shutdown were statistically analyzed. The analysis results will be used for the standardization of start-up and shutdown procedures and it will be reflected in the procedure document

Designing Effective Programmes for Encouraging the Business Start-up Process: Lessons from UK Experience.

Science.gov (United States)

Gibb, Allan A.

1987-01-01

Outlines programs in the United Kingdom (UK) designed to encourage the starting of small businesses. Successful programs help entrepreneurs obtain financial support, get business training, and develop a business plan. Recommends emphasis on personal competency and motivation training as well as shorter courses. (CH)

The impact of FinTech start-ups on incumbent retail banks' share prices

OpenAIRE

Li, Yinqiao; Spigt, Renée; Swinkels, Laurens

2017-01-01

Background: This study aims to clarify the role of FinTech digital banking start-ups in the financial industry. We examine the impact of the funding of such start-ups on the stock returns of 47 incumbent US retail banks for 2010 to 2016. Methods: To capture the importance of FinTech start-ups, we use data on both the dollar-volume of funding and number of deals. We relate these to the stock returns with panel data regression methods. Results: Our results indicate a positive relationship exist...

Start-up and commercial operation of the Laguna Verde power plants, unit 1

International Nuclear Information System (INIS)

Torres R, J.F.

1991-01-01

The main features of the unit 1 of the Laguna Verde Power Plant is presented as well as the phases of the start-up process. The process includes various steps and tests up to start the commercial operation. (author)

Influence of the feeding regime on the start-up and operation of the ...

African Journals Online (AJOL)

It was revealed that the feeding regime is an important factor in the successful start-up of the Anammox process. Nitrite concentration peaks at the beginning of a feeding period will lead to an unsuccessful start-up, while a slow input of nitrogen speeds up the process. Feeding regimes are less important in partial nitritation ...

The start up as a phase of architectural design process.

Science.gov (United States)

Castro, Iara Sousa; Lima, Francisco de Paula Antunes; Duarte, Francisco José de Castro Moura

2012-01-01

Alterations made in the architectural design can be considered as a continuous process, from its conception to the moment a built environment is already in use. This article focuses on the "moving phase", which is the initial moment of the environment occupation and the start-up of services. It aims to show that the continuity of ergonomics interventions during the "moving phase" or start up may reveal the built environment inadequacies; clearly showing needs not met by the design and allowing making instant decisions to solve non-foreseen problems. The results have revealed some lessons experienced by users during a critical stage not usually included in the design process.

The Effect of an Altitude Training Camp on Swimming Start Time and Loaded Squat Jump Performance.

Directory of Open Access Journals (Sweden)

Amador García-Ramos

Full Text Available This study evaluated the influence of an altitude training (AT camp on swimming start time and loaded squat jump performance. To accomplish this goal, 13 international swimmers (8 women, 5 men were allocated to both the control (Sea Level Training, SLT and experimental conditions (AT, 2320 m above sea level that were separated by a one year period. All tests (15 m freestyle swimming start and loaded squat jumps with additional loads of 25%, 50%, 75%, and 100% of swimmers' body weight were performed before and after a concurrent 3-week strength and endurance training program prescribed by the national coach. Following the SLT camp, significant impairments in swimming start times to 10 (+3.1% and 15 m (+4.0% were observed (P 0.05. Trivial changes in peak velocity were obtained during the loaded squat jump after both training periods (effect sizes: < 0.20. Based on these results we can conclude that a traditional training high-living high strategy concurrent training of 3 weeks does not adversely affect swimming start time and loaded squat jump performance in high level swimmers, but further studies are necessary to assess the effectiveness of power-oriented resistance training in the development of explosive actions.

Plasma current start-up experiments without the central solenoid in the TST-2 spherical tokamak

International Nuclear Information System (INIS)

Takase, Y.; Ejiri, A.; Shiraiwa, S.; Adachi, Y.; Ishii, N.; Kasahara, H.; Nuga, H.; Ono, Y.; Oosako, T.; Sasaki, M.; Shimada, Y.; Sumitomo, N.; Taguchi, I.; Tojo, H.; Tsujimura, J.; Ushigome, M.; Yamada, T.; Hanada, K.; Hasegawa, M.; Idei, H.; Nakamura, K.; Sakamoto, M.; Sasaki, K.; Sato, K.N.; Zushi, H.; Nishino, N.; Mitarai, O.

2006-01-01

Several techniques for initiating the plasma current without the use of the central solenoid are being developed in TST-2. While TST-2 was temporarily located at Kyushu University, two types of start-up scenarios were demonstrated. (1) A plasma current of 4 kA was generated and sustained for 0.28 s by either electron cyclotron wave or electron Bernstein wave, without induction. (2) A plasma current of 10 kA was obtained transiently by induction using only outboard poloidal field coils. In the second scenario, it is important to supply sufficient power for ionization (100 kW of EC power was sufficient in this case), since the vertical field during start-up is not adequate to maintain plasma equilibrium. In addition, electron heating experiments using the X-B mode conversion scenario were performed, and a heating efficiency of 60% was observed at a 100 kW RF power level. TST-2 is now located at the Kashiwa Campus of the University of Tokyo. Significant upgrades were made in both magnetic coil power supplies and RF systems, and plasma experiments have restarted. RF power of up to 400 kW is available in the high-harmonic fast wave frequency range around 20 MHz. Four 200 MHz transmitters are now being prepared for plasma current start-up experiments using RF power in the lower-hybrid frequency range. Preparations are in progress for a new plasma merging experiment (UTST) aimed at the formation and sustainment of ultra-high β ST plasmas

Assessing the impact of a targeted plyometric training on changes in selected kinematic parameters of the swimming start.

Science.gov (United States)

Rejman, Marek; Bilewski, Marek; Szczepan, Stefan; Klarowicz, Andrzej; Rudnik, Daria; Maćkała, Krzysztof

2017-01-01

The aim of this study was to analyse changes taking place within selected kinematic parameters of the swimming start, after completing a six-week plyometric training, assuming that the take-off power training improves its effectiveness. The experiment included nine male swimmers. In the pre-test the swimmers performed three starts focusing on the best performance. Next, a plyometric training programme, adapted from sprint running, was introduced in order to increase a power of the lower extremities. The programme entailed 75 minute sessions conducted twice a week. Afterwards, a post-test was performed, analogous to the pre-test. Spatio-temporal structure data of the swimming start were gathered from video recordings of the swimmer above and under water. Impulses triggered by the plyometric training contributed to a shorter start time (the main measure of start effectiveness) and glide time as well as increasing average take-off, flight and glide velocities including take-off, entry and glide instantaneous velocities. The glide angle decreased. The changes in selected parameters of the swimming start and its confirmed diagnostic values, showed the areas to be susceptible to plyometric training and suggested that applied plyometric training programme aimed at increasing take-off power enhances the effectiveness of the swimming start.

CERN confirms goal of 2007 start-up for LHC

CERN Document Server

2005-01-01

Speaking at the 131st session of CERN Council on 17 December 2004, the Director-General, Robert Aymar, confirmed that the top priority is to maintain the goal of starting up the Large Hadron Collider (LHC) in 2007.

ECommerce Strategy for Footwear Manufacturing Start-up

OpenAIRE

Kuzmanovic, Slobodan

2010-01-01

This paper defines and analyzes an eCommerce strategy for a footwear manufacturing start-up firm and assesses the financial impact this eCommerce strategy has in supporting the firm’s business model. The market analysis of the importance of eCommerce determined the online channel’s market share and influence on consumer purchasing decisions, while the industry analysis examined the competitive landscape and industry forces as drivers of forward integration from manufacturing to wholesale and ...

A single center analysis of factors influencing study start-up timeline in clinical trials.

Science.gov (United States)

Krafcik, Brianna M; Doros, Gheorghe; Malikova, Marina A

2017-11-01

Efficient start-up phase in clinical trials is crucial to execution. The goal was to determine factors contributing to delays. The start-up milestones were assessed for 38 studies and analyzed. Total start-up time was shorter for following studies: device trials, no outsourcing, fewer ancillary services used and in interventional versus observational designs. The use of a centralized Institutional Review Board (IRB) versus a local IRB reduced time to approval. Studies that never enrolled took longer on average to finalize their budget/contract, and obtain IRB than ones that did enroll. Different features of clinical trials can affect timeline of start-up process. An understanding of the impact of each feature allows for optimization.

Start-up assist by magnetized plasma flow injection in TPE-RX reversed-field pinch

Energy Technology Data Exchange (ETDEWEB)

Asai, T. [College of Science and Technology, Nihon University, 1-8 Kanda-Surugadai, Chiyoda-ku, Tokyo 101-8308 (Japan)]. E-mail: asai@phys.cst.nihon-u.ac.jp; Nagata, M. [Graduate School of Engineering, University of Hyogo, Himeji (Japan); Koguchi, H. [National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba (Japan); Hirano, Y. [National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba (Japan); Sakakita, H. [National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba (Japan); Yambe, K. [National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba (Japan); Kiyama, S. [National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba (Japan)

2006-11-15

A reversed-field pinch (RFP) start-up assisted by a magnetized plasma flow injection was demonstrated for the first time on a TPE-RX machine. This sequence of experiments aimed to establish a new method of ionization, gas-fill and helicity injection in the start-up phase of an RFP. In this start-up method, magnetized and well-ionized plasma is formed by a magnetized coaxial plasma gun and injected into the torus chamber as an initial pre-ionized plasma for RFP formation. In the initial experiments, attenuated density pump-out and comparatively slow decay of the toroidal flux and plasma current were observed as evidence of its being an effective start-up method.

Effect of zero-valent iron and trivalent iron on UASB rapid start-up.

Science.gov (United States)

Wang, Jie; Fang, Hongyan; Jia, Hui; Yang, Guang; Gao, Fei; Liu, Wenbin

2018-01-01

In order to realize the rapid start-up of upflow anaerobic sludge blanket (UASB) reactor, the iron ion in different valence state was added to UASB. The results indicated that the start-up time of R3 (FeCl 3 ) was 48 h faster than that of R2 (zero-valent iron (ZVI)). It was because the FeCl 3 could rapidly promote granulation of sludge as a flocculant. However, ZVI released Fe 2+ through corrosion slowly, and then the Fe 2+ increased start-up speed by enhancing enzyme activity and enriching methanogens. In addition, the ZVI and FeCl 3 could promote hydrolysis acidification and strengthen the decomposition of long-chain fatty acids. The detection of iron ions showed that iron ions mainly existed in the sludge. Because the high concentration of Fe 2+ could inhibit anaerobic bacteria activity, excess Fe 3+ could be changed into iron hydroxide precipitation to hinder the mass transfer process of anaerobic bacteria under the alkaline condition. The FeCl 3 was suitable to be added at the initial stage of UASB start-up, and the ZVI was more fitted to be used in the middle stage of reactor start-up to improve the redox ability.

Method for heating of the primary circuit of WWER electric power units at cold start-up

International Nuclear Information System (INIS)

Ivanov, I.N.; Dimitrov, B.D.; Korkinova, M.I.

1982-01-01

The method increases the heating rate and shorten the start-up time of the electric power units. It comprises a primary stopping of the reactor core heating and provides a forced circulation of the heat-carrier through the circulation cycles of the primary circuit. The thermal energy is supplied in one or several steam generators in the secondary circuit of an NPP operating unit. 1 cl., 3 figs

Ageing significantly at Temelin start-up process

International Nuclear Information System (INIS)

Brumovsky, M.; Zdarek, J.; Hahn, J.

2002-01-01

Full text: NPP Temelin is a unique case in Plant Life Management Programme application as it is now only in the period of start-up and thus all measures can be easily prepared and implemented in advance based on the experience of similar plants already in operation. Detailed analyses of potential damaging mechanisms as well as of initial conditions and properties of main components have been already done. Regarding this analysis, several measures have been prepared and put into operation: List of important parameters to be measured, saved and periodically analysed have been prepared - some of these parameters are measured in the framework of standard I and C system; new sets of sensors were installed for some additional ones; Special software for on-line evaluation of stress/temperature conditions and subsequently also fatigue damage in some chosen parts (with flow stratification etc.) have been installed and during reactor start-up tests have been checked; Surveillance specimen programme for reactor pressure vessel material monitoring was modified for better and fuller characterisation of material changes during operation; Ex-vessel neutron flux measurement has been established as a part of surveillance specimen programme. The whole Plant Life Management Programme is governed by a special PLIM Group in the plant with necessary links and responsibilities and rules with other necessary plant departments. (author)

Personality Traits and the Evaluation of Start-up Subsidies

NARCIS (Netherlands)

Caliendo, M.; Künn, Steffen; M., Weißenberger,

2016-01-01

Many countries support business start-ups to spur economic growth and reduce unemployment with different programmes. Evaluation studies of such programmes commonly rely on the conditional independence assumption (CIA), allowing a causal interpretation of the results only if all relevant variables

Summary revaluation of energetic start-up of the unit 1 of nuclear power plant Mochovce

International Nuclear Information System (INIS)

Sarvaic, I.; Miskolci, M.

1998-01-01

The document contents stage revaluation of energetic start-up of the unit 1 of nuclear power plant Mochovce. Test results of the stage of energetic start-up are summarized in the document, valuation of important systems and block devices as well as fulfilling the operation limits and conditions has been performed. On that base conclusions and recommendations for start-up the unit 2 and for commercial operation of the unit 1 are elaborated. The valuation has been elaborated by a scientific management for start-up nuclear power plant Mochovce of nuclear safety of nuclear power facilities. Scientific management for start-up of nuclear power plant Mochovce performed continuous valuation of individual power levels after ending of each individual level and it gave its valuation to energy power level with recommendations and conditions for further start-up process and operation. Scientific management finished its activity at the unit 1 of nuclear power plant Mochovce according to a statute of scientific management for start-up after successful completion of conclusive block run. Scientific management group was founded in February 1998 at nuclear power plant Mochovce. Its members are experts from Slovak, Czech, Russian and French organizations which are participating in power plant completion. Members are listed in a supplement No. 2

Digital Marketing practices amongst start-up accelerators

OpenAIRE

Azinheiro, Marisa Filipa Ramos

2017-01-01

Digital Marketing (DM) is a vital marketing tool used by all types of companies nowadays. Accelerators are companies that appeared in the last few years to help start-ups grow and, just like any other company, they are using DM as well. This research explored which were the DM strategies used by accelerators. To do so, an online survey was shared amongst more than 300 accelerators across the world, whose results were analyzed by using SPSS Software. Correlation analyses and significance te...

Microbiology and performance of a methanogenic biofilm reactor during the start-up period.

Science.gov (United States)

Cresson, R; Dabert, P; Bernet, N

2009-03-01

To understand the interactions between anaerobic biofilm development and process performances during the start-up period of methanogenic biofilm reactor. Two methanogenic inverse turbulent bed reactors have been started and monitored for 81 days. Biofilm development (adhesion, growth, population dynamic) and characteristics (biodiversity, structure) were investigated using molecular tools (PCR-SSCP, FISH-CSLM). Identification of the dominant populations, in relation to process performances and to the present knowledge of their metabolic activities, was used to propose a global scheme of the degradation routes involved. The inoculum, which determines the microbial species present in the biofilm influences bioreactor performances during the start-up period. FISH observations revealed a homogeneous distribution of the Archaea and bacterial populations inside the biofilm. This study points out the link between biodiversity, functional stability and methanogenic process performances during start-up of anaerobic biofilm reactor. It shows that inoculum and substrate composition greatly influence biodiversity, physiology and structure of the biofilm. The combination of molecular techniques associated to a biochemical engineering approach is useful to get relevant information on the microbiology of a methanogenic growing biofilm, in relation with the start-up of the process.

Impurity control and its impact upon start-up and transformer recharging in NET

International Nuclear Information System (INIS)

Harrison, M.F.A.

1985-01-01

Control of the release of impurities and their subsequent ingress and exhaust from tokamak plasmas has been the subject of intensive studies aimed at both the prediction of reactor burn condition and the interpretation of results from present experiments. Control concepts which are specific to current-initiation, current ramp-up and RF heating during start-up of a reactor such as NET have to date received little attention, according to the author. This paper presents an inductive start-up scenario which is typical of those presently being considered for NET. Shown are plasma configurations during start-up. Particularly significant issues are the advantages of forming the divertor configuration at the earliest practicable stage and the problems expected due to contamination of the limiter with divertor material

Prediction of the stability of BWR reactors during the start-up process

International Nuclear Information System (INIS)

Ruiz E, J.A.; Castillo D, R.; Blazquez M, J.B.

2004-01-01

The Boiling Water Reactors (BWR) are susceptible of uncertainties of power when they are operated to low flows of coolant (W) and high powers (P), being presented this situation mainly in the start-up process. The start-up process could be made but sure if the operator knew the value of the stability index Decay reason (Dr) before going up power and therefore to guarantee the stability. The power and the flow are constantly measures, the index Dr could also be considered its value in real time. The index Dr depends on the power, flow and many other values, such as, the distribution of the flow axial and radial neutronic, the temperature of the feeding water, the fraction of holes and other thermohydraulic and nuclear parameters. A simple relationship of Dr is derived leaving of the pattern reduced of March-Leuba, where three independent variables are had that are the power, the flow and a parameter that it contains the rest of the phenomenology, that is to say all the other quantities that affect the value of Dr. This relationship developed work presently and verified its prediction with data of start-up of commercial reactors could be used for the design of a practical procedure practice of start-up, what would support to the operator to prevent this type of events of uncertainty. (Author)

Assessment study of RELAP5/MOD2, CYCLE 36. 04 based on spray start-up test for DOEL-4

Energy Technology Data Exchange (ETDEWEB)

Moeyaert, P.; Stubbe, E.

1989-07-01

This report presents an assessment study for the code RELAP-5 MOD-2 based on a pressurizer spray start-up test of the Doel-4 power plant. Doel-4 is a three loop WESTINGHOUSE PWR plant ordered by the EBES utility with a nominal power rating of 1000 MWe and equipped with preheater type E steam generators. A large series of commissioning tests are normally performed on new plants, of which the so called pressurizer spray and heater test (SU-PR-01) was performed on February 2nd 1985. TRACTEBEL, being the Architect-Engineer for this plant was closely involved with all start-up tests and was responsible for the final approval of the tests.

Modeling of a Small Transportation Company’s Start-up with Limited Data during Economic Recession

OpenAIRE

Fang, Xiaoping; Ansell, Jonathan; Chen, Weiya

2014-01-01

This paper presents a modeling method for analyzing a small transportation company’s start-up and growth during a global economic crisis which had an impact on in China which is designed to help the owners make better investment and operating decisions with limited data. Since there is limited data, simple regression model and binary regression model failed to generate satisfactory results, so an additive periodic time series model was built to forecast business orders and income. Since the t...

A novel high voltage start up circuit for an integrated switched mode power supply

Energy Technology Data Exchange (ETDEWEB)

Hu Hao; Chen Xingbi, E-mail: huhao21@uestc.edu.c [State Key Laboratory of Electronic Thin Films and Integrated Devices, University of Electronic Science and Technology of China, Chengdu 610054 (China)

2010-09-15

A novel high voltage start up circuit for providing an initial bias voltage to an integrated switched mode power supply (SMPS) is presented. An enhanced mode VDMOS transistor, the gate of which is biased by a floating p-island, is used to provide start up current and sustain high voltage. An NMOS transistor having a high source to ground breakdown voltage is included to extend the bias voltage range to the SMPS. Simulation results indicate that the high voltage start up circuit can start and restart as designed. The proposed structure is believed to be more energy saving and cost-effective compared with other solutions. (semiconductor devices)

Urbanization and start-up rates in different geographies : Belgium, the Netherlands and Sweden

NARCIS (Netherlands)

Hans, Lianne; Koster, Sierdjan

2017-01-01

This study addresses the mediating role of settlement patterns in the relationship between urbanization and start-up activity. Places do not operate in a vacuum and to understand the effect of 'own' density on start-up patterns, we need to account for the urban spillovers or borrowed size that they

Strategies for Reducing the Start-up Operation of Microbial Electrochemical Treatments of Urban Wastewater

Directory of Open Access Journals (Sweden)

Zulema Borjas

2015-12-01

Full Text Available Microbial electrochemical technologies (METs constitute the core of a number of emerging technologies with a high potential for treating urban wastewater due to a fascinating reaction mechanism—the electron transfer between bacteria and electrodes to transform metabolism into electrical current. In the current work, we focus on the model electroactive microorganism Geobacter sulfurreducens to explore both the design of new start-up procedures and electrochemical operations. Our chemostat-grown plug and play cells, were able to reduce the start-up period by 20-fold while enhancing chemical oxygen demand (COD removal by more than 6-fold during this period. Moreover, a filter-press based bioreactor was successfully tested for both acetate-supplemented synthetic wastewater and real urban wastewater. This proof-of-concept pre-pilot treatment included a microbial electrolysis cell (MEC followed in time by a microbial fuel cell (MFC to finally generate electrical current of ca. 20 A·m−2 with a power of 10 W·m−2 while removing 42 g COD day−1·m−2. The effective removal of acetate suggests a potential use of this modular technology for treating acetogenic wastewater where Geobacter sulfurreducens outcompetes other organisms.

Study on ECH-assisted start-up using trapped particle configuration in KSTAR and application to ITER

Science.gov (United States)

Lee, Jeongwon; Kim, Jayhyun; An, YoungHwa; Yoo, Min-Gu; Hwang, Y. S.; Na, Yong-Su

2017-12-01

ECH-assisted start-up using trapped particle configuration (TPC) is firstly studied in a superconducting, conventional tokamak, KSTAR. First, improved and efficient start-up using TPC than conventional field null configuration (FNC) is achieved by enhanced pre-ionization plasma quality. TPC shows the broader operation window in terms of the poloidal field quality and the deuterium prefill pressure than that of FNC. Surprisingly the particle trapping enhances the plasma start-up performance even with much lower particle trapping ratio than that of spherical torus. Reliability of TPC with low trapping ratio is investigated by 0D plasma evolution code, TECHP0D. Second, the characteristics of TPC start-up are explored with experiments and modellings. Two kind of start-up failure conditions are identified by the magnetic pitch and prefill pressure scan experiments: (i) low ionization rate; and (ii) low density condition. These experimental observation has consistency with TECHP0D modeling result. Finally, reliable ITER-relevant low toroidal electric field start-up using TPC is achieved with drastically improved success rate of start-up in KSTAR. In this experiments, validity of the ITER-like toroidally inclined ECH/ECCD injection is also expected. Time dependent ITER start-up scenario using TPC is proposed and the superiority of it than FNC is discussed.

Hydrogen energy network start-up scenario

International Nuclear Information System (INIS)

Weingartner, S.; Ellerbrock, H.

1994-01-01

Hydrogen is widely discussed as future fuel and energy storage medium either to replace conventional fuels for automobiles, aircrafts and ships or to avoid the necessity of bulky battery systems for electricity storage, especially in connection with solar power systems. These discussions however started more than 25 years ago and up to now hydrogen has failed to achieve a major break-through towards wider application as energy storage medium in civil markets. The main reason is that other fuels are cheaper and very well implemented in our daily life. A study has been performed at Deutsche Aerospace in order to evaluate the boundary conditions, either political or economical, which would give hydrogen the necessary push, i.e. advantage over conventional fuels. The main goal of this study was to identify critical influence factors and specific start-up scenarios which would allow an economical and practically realistic use of hydrogen as fuel and energy medium in certain niche markets outside the space industry. Method and major results of this study are presented in detail in the paper. Certain niche markets could be identified, where with little initial governmental support, either by funding, tax laws or legislation, hydrogen can compete with conventional fuels. This however requires a scenario where a lot of small actions have to be taken by a high variety of institutions and industries which today are not interconnected with each other, i.e. it requires a new cooperative and proactive network between e.g. energy utilities, car industries, those who have a sound experience with hydrogen (space industry, chemical industry) and last, but certainly not the least, the government. Based on the developed scenario precise recommendations are drawn as conclusions

Evaluating effectiveness of project start-ups: an exploratory study

NARCIS (Netherlands)

Halman, Johannes I.M.; Burger, G.T.N.

In this paper an exploratory study is reported about the effectiveness of project start-up (PSU) practices within a world-scale operating, high technology innovating and manufacturing company. The emphasis is on the focal position of both project owner and project manager. To uncover potential

Start-up neutral-beam power supply system for MFTF

International Nuclear Information System (INIS)

Mooney, L.J.

1979-01-01

This paper describes some of the design features and considerations of the MFTF start-up neutral-beam power supplies. In particular, we emphasize features of the system that will ensure MFTF compatibility and achieve the required reliability/availability for the MFTF to be successful

A method for starting up the gas isolating section of a benzine pyrolysis installation

Energy Technology Data Exchange (ETDEWEB)

Bruskin, Yu.A.; Gorokhov, V.V.; Kotler, L.D.; Shevchenko, K.N.; Zeldin, V.Ye.

1982-01-01

In the method for starting up a gas isolation section of a benzine pyrolysis unit, which includes starting the demethanizer in a steaming mode, starting the ethane and ethylene and propane and propylene towers, filling the ethylene cooling system with a hydrocarbon fraction, starting the ethylene cooling system, switching to a mode of the demethanization unit, starting the subassemblies for hydration and isolation of the ethylene and propylene fractions, in order to reduce the length of the start up period and to reduce the ejection of gas to the burner, after starting the demethanizer in the steaming mode, starting the ethane and ethylene and propane and propylene towers, the ethane and ethylene and propane and propylene fractions are mixed before the hydration subassemblies with an H2 bearing gas for catalytic reforming and then the other units and subassemblies are started.

Start-up Strategy for Continuous Bioreactors

Directory of Open Access Journals (Sweden)

A.C. da Costa

1997-06-01

Full Text Available Abstract - The start-up of continuous bioreactors is solved as an optimal control problem. The choice of the dilution rate as the control variable reduces the dimension of the system by making the use of the global balance equation unnecessary for the solution of the optimization problem. Therefore, for systems described by four or less mass balance equations, it is always possible to obtain an analytical expression for the singular arc as a function of only the state variables. The steady state conditions are shown to satisfy the singular arc expression and, based on this knowledge, a feeding strategy is proposed which leads the reactor from an initial state to the steady state of maximum productivity

Bauxite slurry pipeline: start up operation

Energy Technology Data Exchange (ETDEWEB)

Othon, Otilio; Babosa, Eder; Edvan, Francisco; Brittes, Geraldo; Melo, Gerson; Janir, Joao; Favacho, Orlando; Leao, Marcos; Farias, Obadias [Vale, Rio de Janeiro, RJ (Brazil); Goncalves, Nilton [Anglo Ferrous Brazil S.A., Rio de Janeiro, RJ (Brazil)

2009-07-01

The mine of Miltonia is located in Paragominas-PA, in the north of Brazil. Bauxite slurry pipeline starts at the Mine of Miltonia and finishes in the draining installation of Alunorte refinery at the port of Barcarena-PA, located approximately 244km away from the mine. The pipeline runs over seven cities and passes below four great rivers stream beds. The system was designed for an underground 24 inches OD steel pipe to carry 9.9 million dry metric tonnes per annum (dMTAs) of 50.5% solid concentration bauxite slurry, using only one pumping station. The system is composed by four storage tanks and six piston diaphragm pumps, supplying a flow of 1680 m3/h. There is a cathodic protection system along the pipeline extension to prevent external corrosion and five pressure monitoring stations to control hydraulic conditions, there is also a fiber optic cable interconnection between pump station and terminal station. Pipeline Systems Incorporated (PSI) was the designer and followed the commissioning program of the start up operations. This paper will describe the beginning of the pipeline operations, technical aspects of the project, the operational experiences acquired in these two years, the faced problems and also the future planning. (author)

Method for controlling start-up and steady state performance of a closed split flow recompression brayton cycle

Science.gov (United States)

Pasch, James Jay

2017-02-07

A method of resolving a balanced condition that generates control parameters for start-up and steady state operating points and various component and cycle performances for a closed split flow recompression cycle system. The method provides for improved control of a Brayton cycle thermal to electrical power conversion system. The method may also be used for system design, operational simulation and/or parameter prediction.

Study and application of digital physical start-up system for nuclear reactor

International Nuclear Information System (INIS)

Qu Ronghong; Li Baoxiang; Xu Xiaolin

2004-01-01

The digital physical start-up system for nuclear reactor is introduced. The system was used successfully in physical start-up experiment of 10 MW high-temperature gas-cooled reactor. It is proved practically that the system not only runs reliably and calculates both rapidly and correctly and relieves the loads of operators, but also has the better characters of monitoring and showing the real-time results of experiments than the analog systems. (author)

Lessons learned from an installation perspective for chemical demilitarization plant start-up at four operating incineration sites.

Energy Technology Data Exchange (ETDEWEB)

Motz, L.; Decision and Information Sciences

2011-02-21

This study presents the lessons learned by chemical storage installations as they prepared for the start of chemical demilitarization plant operations at the four current chemical incinerator sites in Alabama, Arkansas, Oregon, and Utah. The study included interviews with persons associated with the process and collection of available documents prepared at each site. The goal was to provide useful information for the chemical weapons storage sites in Colorado and Kentucky that will be going through plant start-up in the next few years. The study is not a compendium of what to do and what not to do. The information has been categorized into ten lessons learned; each is discussed individually. Documents that may be useful to the Colorado and Kentucky sites are included in the appendices. This study should be used as a basis for planning and training.

START-UP FINANCING SOURCES: DOES GENDER MATTER? SOME EVIDENCE FOR EU AND ROMANIA

Directory of Open Access Journals (Sweden)

Badulescu Alina

2011-07-01

Full Text Available Although financial resources are very important in SMEs in general, and for start-ups in particular, many entrepreneurs face numerous restrictions in finding sources for start-up financing. The present article aims to investigate the similarities or differences in start-up financing sources due to gender issues, otherwise to investigate if female entrepreneurs use (or have access different financial sources in the early stage of their business. As reported by the literature, access to finance is one of the most important issues for SMEs and nascent entrepreneurs. Moreover, among the main financial issues, the first one is the access to start-up finance (Schwartz, 1976; Carter and Cannon, 1992; Johnson and Storey, 1993; Koper, 1993; Van Auken et al, 1993; Carter and Rosa, 1998, FOBS survey 2005. In all sectors, women use for starting up businesses substantially less capital then men. Women encounter, more then men, credibility problems when dealing with bankers. This problem causes important effects concerning the performance, survival and growth of women-run businesses. The present research focuses on revealing how male and female entrepreneurs face and solve the problem of start-up financing sources. The methodology is based on using the dataset "Enterprises managed by the founder - broken down by gender of the entrepreneur", available in EUROSTAT database. The data selected refers to the start-up financing sources available for European Union and Romania, regarding activities included in NACE: Industry and services excluding public administration and management activities of holding companies and 2005 as time of reference. The data were used to make some comparison between: male versus female entrepreneurs in EU; male versus female entrepreneurs in Romania; EU entrepreneurs versus Romanian entrepreneurs. The main findings reveal that there are no significant differences between men and women concerning the start-up financing sources. The main

Research Strategies in Science-based Start-ups

DEFF Research Database (Denmark)

Valentin, Finn; Dahlgren, Johan Henrich; Lund Jensen, Rasmus

develop a contingency view on complex problem solving which structures the argument into three steps:1) Characterising the problem architectures addressed by different types of DBFs;2) Testing and confirming that DBFs form requisite research strategies, by which we refer to problem solving approaches......Although biotech start-ups fail or succeed based on their research few attempts have been made to examine if and how they strategize in this core of their activity. Popular views on Dedicated Biotech Firms (DBFs) see the inherent uncertainty of research as defying notions of strategizing, directing...

Successful hydraulic strategies to start up OLAND sequencing batch reactors at lab scale.

Science.gov (United States)

Schaubroeck, Thomas; Bagchi, Samik; De Clippeleir, Haydée; Carballa, Marta; Verstraete, Willy; Vlaeminck, Siegfried E

2012-05-01

Oxygen-limited autotrophic nitrification/denitrification (OLAND) is a one-stage combination of partial nitritation and anammox, which can have a challenging process start-up. In this study, start-up strategies were tested for sequencing batch reactors (SBR), varying hydraulic parameters, i.e. volumetric exchange ratio (VER) and feeding regime, and salinity. Two sequential tests with two parallel SBR were performed, and stable removal rates > 0.4 g N l(-1) day(-1) with minimal nitrite and nitrate accumulation were considered a successful start-up. SBR A and B were operated at 50% VER with 3 g NaCl l(-1) in the influent, and the influent was fed over 8% and 82% of the cycle time respectively. SBR B started up in 24 days, but SBR A achieved no start-up in 39 days. SBR C and D were fed over 65% of the cycle time at 25% VER, and salt was added only to the influent of SBR D (5 g NaCl l(-1)). Start-up of both SBR C and D was successful in 9 and 32 days respectively. Reactor D developed a higher proportion of small aggregates (0.10-0.25 mm), with a high nitritation to anammox rate ratio, likely the cause of the observed nitrite accumulation. The latter was overcome by temporarily including an anoxic period at the end of the reaction phase. All systems achieved granulation and similar biomass-specific nitrogen removal rates (141-220 mg N g(-1) VSS day(-1)). FISH revealed a close juxtapositioning of aerobic and anoxic ammonium-oxidizing bacteria (AerAOB and AnAOB), also in small aggregates. DGGE showed that AerAOB communities had a lower evenness than Planctomycetes communities. A higher richness of the latter seemed to be correlated with better reactor performance. Overall, the fast start-up of SBR B, C and D suggests that stable hydraulic conditions are beneficial for OLAND while increased salinity at the tested levels is not needed for good reactor performance. © 2012 The Authors. Microbial Biotechnology © 2012 Society for Applied Microbiology and Blackwell Publishing

An Integrated Start-Up Method for Pumped Storage Units Based on a Novel Artificial Sheep Algorithm

Directory of Open Access Journals (Sweden)

Zanbin Wang

2018-01-01

Full Text Available Pumped storage units (PSUs are an important storage tool for power systems containing large-scale renewable energy, and the merit of rapid start-up enable PSUs to modulate and stabilize the power system. In this paper, PSU start-up strategies have been studied and a new integrated start-up method has been proposed for the purpose of achieving swift and smooth start-up. A two-phase closed-loop startup strategy, composed of switching Proportion Integration (PI and Proportion Integration Differentiation (PID controller is designed, and an integrated optimization scheme is proposed for a synchronous optimization of the parameters in the strategy. To enhance the optimization performance, a novel meta-heuristic called Artificial Sheep Algorithm (ASA is proposed and applied to solve the optimization task after a sufficient verification with seven popular meta-heuristic algorithms and 13 typical benchmark functions. Simulation model has been built for a China’s PSU and comparative experiments are conducted to evaluate the proposed integrated method. Results show that the start-up performance could be significantly improved on both indices on overshoot and start-up, and up to 34%-time consumption has been reduced under different working condition. The significant improvements on start-up of PSU is interesting and meaning for further application on real unit.

Start Up Current Control of Buck-Boost Convertor-Fed Serial DC Motor

Directory of Open Access Journals (Sweden)

Yusuf SÖNMEZ

2009-02-01

Full Text Available Generally, DC motors are given preference for industrial applications such as electric locomotives, cranes, goods lifts. Because of they have high starting moment; they initially start with high current. This high start-up current must be decreased since it may damage windings of the motor and increases power consumption. It could be controlled by an appropriate driver system and controller. The nature of fuzzy logic control has adaptive characteristics that can achieve robust response to a system with uncertainty, parameter variation, and load disturbance. In this paper, fuzzy logic based control of start-up current of a Buck-Boost Converter fed serial DC motor is examined through computer simulation. In order to see the advantages of fuzzy logic control, classical PI control has applied to the same motor, under same circumstances and has been compared. C++ Builder software has been used for the simulation. According to the simulation results, plainly, fuzzy logic control has stronger responses than classical PI control and uses lower current at starting moment.

Haiti Start-Up mission design cold chain mango-avocado

NARCIS (Netherlands)

Oostewechel, René; Régis, Yves-Laurent; Brouwers, Jan

2018-01-01

This report shares the findings of the first start-up mission to Haiti, exploring all relevant elements pertaining to the design of the mango and avocado cold chain for fruit export to the USA, with the possibility to extend logistics services to other fruits like pineapple. Findings of the mission

Device for the nuclear reactor automatic start-up and power control

International Nuclear Information System (INIS)

Nikiforov, B.N.; Volkov, A.V.; Ogon'kov, A.I.

1978-01-01

A description and flowsheet of a reactor start-up and power-control automatic device containing no nonlinear elements with a relay characteristic are presented. The device consists of two independent channels for measuring the physical power and time (period) constant of the reactor. Requirements for the device are considered, based on the condition of a minimum permissible number of a servomechanism operations due to fluctuations of an input signal which appear because of the statistical nature of processes taking place in the reactor. It is noted that the threshold amplifier used in the device allows a considerable decrease of the reactor start-up time

Start-up and control method and apparatus for resonant free piston Stirling engine

Science.gov (United States)

Walsh, Michael M.

1984-01-01

A resonant free-piston Stirling engine having a new and improved start-up and control method and system. A displacer linear electrodynamic machine is provided having an armature secured to and movable with the displacer and having a stator supported by the Stirling engine housing in juxtaposition to the armature. A control excitation circuit is provided for electrically exciting the displacer linear electrodynamic machine with electrical excitation signals having substantially the same frequency as the desired frequency of operation of the Stirling engine. The excitation control circuit is designed so that it selectively and controllably causes the displacer electrodynamic machine to function either as a generator load to extract power from the displacer or the control circuit selectively can be operated to cause the displacer electrodynamic machine to operate as an electric drive motor to apply additional input power to the displacer in addition to the thermodynamic power feedback to the displacer whereby the displacer linear electrodynamic machine also is used in the electric drive motor mode as a means for initially starting the resonant free-piston Stirling engine.

Issues to Consider before Licensing Technology to a Start-Up: Mitigating Risk with Early Planning for the Entire Business Cycle

Science.gov (United States)

LaBarge, Jeffrey H.

2005-01-01

If done correctly, licensing technology to a start-up company provides a great opportunity for a university to commercialize its technology and generate good will. If done incorrectly, however, the venture may jeopardize the technology's value and adversely affect the university's reputation within the business and academic communities. Before…

Emissions of polychlorinated diphenyl ethers from a municipal solid waste incinerator during the start-up operation

International Nuclear Information System (INIS)

Yang, Jing-Sing; Lin, Sheng-Lun; Lin, Ta-Chang; Wu, Yee-Lin; Wang, Lin-Chi; Chang-Chien, Guo-Ping

2015-01-01

Highlights: • This is the first study on the PCDE emission during a MSWI start-up procedure. • The highest PCDE level occurred similar to the PCDD/F reformation temperature. • The pollution control were modified and reduce 86% PCDE peak emission. • Multiple start-ups are analyzed for their effects on the annual PCDE emission. - Abstract: This study examines the emissions of polychlorinated diphenyl ethers (PCDEs) during the start-up processes of a municipal solid waste incinerator (MSWI). Both normal and modified emission control start-ups were tested. Fifteen samples were taken from the flue gas with increasing furnace temperature. Peak PCDE concentrations of 1.48–10.3 ng/Nm 3 were observed at 8–11 h after the start of combustion, when the furnace temperature was in the range of 267–440 °C, that also needed for PCDD/F formation by de novo synthesis. The PCDE emissions could thus, be reduced by current control techniques. Furthermore, the modified control strategies inhibited PCDE formation at the beginning of combustion, and led to an 86% reduction in the maximum PCDE concentration. The overall start-up emissions were calculated as 1.01–3.08 mg, while the annual PCDE emissions with one start-up operation were found to be 7.48–9.64 mg. However, total PCDE emissions will increase by 12–69% if the number of start-up runs increases to between two and eight times per year. Consequently, the prevention of the unnecessary start-ups and advanced activation of the related emission control system are both efficient ways to reduce PCDE emissions.

Emissions of polychlorinated diphenyl ethers from a municipal solid waste incinerator during the start-up operation

Energy Technology Data Exchange (ETDEWEB)

Yang, Jing-Sing [Department of Environmental Engineering, National Cheng Kung University, Tainan 70101, Taiwan (China); Lin, Sheng-Lun, E-mail: cbmsgml@gmail.com [Department of Civil Engineering and Geomatics, Cheng Shiu University, Kaohsiung 83347, Taiwan (China); Super Micro Mass Research and Technology Center, Cheng Shiu University, Kaohsiung 83347, Taiwan (China); Lin, Ta-Chang; Wu, Yee-Lin [Department of Environmental Engineering, National Cheng Kung University, Tainan 70101, Taiwan (China); Wang, Lin-Chi [Department of Civil Engineering and Geomatics, Cheng Shiu University, Kaohsiung 83347, Taiwan (China); Chang-Chien, Guo-Ping, E-mail: guoping@csu.edu.tw [Super Micro Mass Research and Technology Center, Cheng Shiu University, Kaohsiung 83347, Taiwan (China); Department of Cosmetic and Fashion Styling, Kaohsiung 83347, Taiwan (China)

2015-12-15

Highlights: • This is the first study on the PCDE emission during a MSWI start-up procedure. • The highest PCDE level occurred similar to the PCDD/F reformation temperature. • The pollution control were modified and reduce 86% PCDE peak emission. • Multiple start-ups are analyzed for their effects on the annual PCDE emission. - Abstract: This study examines the emissions of polychlorinated diphenyl ethers (PCDEs) during the start-up processes of a municipal solid waste incinerator (MSWI). Both normal and modified emission control start-ups were tested. Fifteen samples were taken from the flue gas with increasing furnace temperature. Peak PCDE concentrations of 1.48–10.3 ng/Nm{sup 3} were observed at 8–11 h after the start of combustion, when the furnace temperature was in the range of 267–440 °C, that also needed for PCDD/F formation by de novo synthesis. The PCDE emissions could thus, be reduced by current control techniques. Furthermore, the modified control strategies inhibited PCDE formation at the beginning of combustion, and led to an 86% reduction in the maximum PCDE concentration. The overall start-up emissions were calculated as 1.01–3.08 mg, while the annual PCDE emissions with one start-up operation were found to be 7.48–9.64 mg. However, total PCDE emissions will increase by 12–69% if the number of start-up runs increases to between two and eight times per year. Consequently, the prevention of the unnecessary start-ups and advanced activation of the related emission control system are both efficient ways to reduce PCDE emissions.

A Start-Up Produces Infomercials for the Internet

Institute of Scientific and Technical Information of China (English)

2011-01-01

@@ The one thing online shopping is missing, says Sukhinder Singh Cassidy, a former Google executive, is infomercials. Ms.Singh Cassidy introduced her new shopping start-up, Joyus.It is an e-commerce site that produces videos to sell products, like a Web version of the Home Shopping Network. "If you think about the ways to sell online, video is underutilized," she said."It's a new way for brands to merchandise their product."

Low start-up voltage dc–dc converter with negative voltage control for thermoelectric energy harvesting

Directory of Open Access Journals (Sweden)

Pui-Sun Lei

2015-01-01

Full Text Available This Letter presents a low start-up voltage dc–dc converter for low-power thermoelectric systems which uses a native n-type MOS transistor as the start-up switch. The start-up voltage of the proposed converter is 300 mV and the converter does not need batteries to start up. The negative voltage control is proposed to reduce the leakage current caused by native n-type transistor and increase the efficiency. The proposed converter was designed using standard 0.18 µm CMOS process with chip size of 0.388 mm^2. The peak efficiency is 63% at load current of 1.5 mA. The proposed converter provides output voltage >1 V at maximum load current of 3.2 mA.

Network brokers or hit makers? Analyzing the influence of incubation on start-up investments

NARCIS (Netherlands)

Van Rijnsoever, Frank J.; Van Weele, Marijn A.; Eveleens, Chris P.

Incubators are a prominent way to support technology based start-ups. Yet, it remains unclear to what extent these incubators enhance start-up performance, nor is it known through which mechanisms this would occur. In this paper we test two mechanisms to explain the relationship between incubation

Spin Start Line Effects on the J2X Gas Generator Chamber Acoustics

Science.gov (United States)

Kenny, R. Jeremy

2011-01-01

The J2X Gas Generator engine design has a spin start line connected near to the turbine inlet vanes. This line provides helium during engine startup to begin turbomachinery operation. The spin start line also acts as an acoustic side branch which alters the chamber's acoustic modes. The side branch effectively creates 'split modes' in the chamber longitudinal modes, in particular below the first longitudinal mode and within the frequency range associated with the injection-coupled response of the Gas Generator. Interaction between the spin start-modified chamber acoustics and the injection-driven response can create a higher system response than without the spin start attached to the chamber. This work reviews the acoustic effects of the spin start line as seen throughout the workhorse gas generator test program. A simple impedance model of the spin start line is reviewed. Tests were run with no initial spin start gas existing in the line, as well as being initially filled with nitrogen gas. Tests were also run with varying spin start line lengths from 0" to 40". Acoustic impedance changes due to different spin start gas constituents and line lengths are shown. Collected thermocouple and static pressure data in the spin start line was used to help estimate the fluid properties along the line length. The side branch impedance model was coupled to a chamber impedance model to show the effects on the overall chamber response. Predictions of the spin start acoustic behavior for helium operation are shown and compared against available data.

Start-up tests of Kashiwazakikariwa Nuclear Power Station Unit No.2 and No.5

International Nuclear Information System (INIS)

Fueki, Kensuke; Aoki, Shiro; Tanaka, Yasuhisa; Yahagi, Kimitoshi

1991-01-01

The Kashiwazakikariwa Nuclear Power Station Units No.5 and No.2 started commercial operation on April 10 and September 28 of 1990 respectively. As the result of the application of the First and Second LWR Improvement and Standardization Program, the plants were designed aiming at improvement of reliability, operation, and maintenance while maintaining safety. Construction of the plants took 6.5 to 7 years for completion, during which period the last 10 months were spent for the start up tests program. Start up tests were carried out under deliberate management to assure that the plants can operate safely and steadily at the prescribed operating points, and the schedules and tests item modifications adopted in Unit No.2 and No.5 were verified under the start up tests program. (author)

Start-up First Term Sheet: Stumbling Blocks to Avoid

Directory of Open Access Journals (Sweden)

Amalyan Nataly D.

2018-01-01

Full Text Available Start-up relationships with business angel and/or venture capital are similar to a marriage – but with a divorce in mind. The latter necessitates a proper prenuptial agreement signing at the very beginning of the relations. In case of business angel and/or venture capital we are speaking about Term sheet, determining pricing, powers and duties of the board, as well as information, participation and protective rights for the partners. Standard Term sheet consists of three buckets of provisions, defining: (i terms impacting start-up valuation and economic division of profits and proceeds upon a liquidity event, (ii terms impacting control over decision making and (iii investor protection terms. This article focuses on financial and economic aspects of funding agreement, exposing some tricky parts of the Term sheet, threatening to transform potential win-win deals into rupture of relations, crash of the company or even legal battles. The results of the analysis are used to substantiate growing in popular appeal thesis that raising too much money can be detrimental for a startup.

Start-Up Rhetoric in Eight Speeches of Barack Obama

Science.gov (United States)

O'Connell, Daniel C.; Kowal, Sabine; Sabin, Edward J.; Lamia, John F.; Dannevik, Margaret

2010-01-01

Our purpose in the following was to investigate the start-up rhetoric employed by U.S. President Barack Obama in his speeches. The initial 5 min from eight of his speeches from May to September of 2009 were selected for their variety of setting, audience, theme, and purpose. It was generally hypothesized that Barack Obama, widely recognized for…

Development of intelligent physical start-up system for nuclear reactor

International Nuclear Information System (INIS)

Wang Canhui; Li Xiang; Huang Liyuan; Fu Guoen; Hu Hai

2008-01-01

In this paper, the Intelligent physical start-up system for nuclear reactor introduced the system composing, hardware design and software design. The system has some merits such as handy operation, fast and accurate mathematic and nicer human-machine interface. (authors)

Regional social legitimacy of entrepreneurship: Implications for entrepreneurial intention and start-up behaviour

OpenAIRE

Kibler, Ewald; Kautonen, Teemu; Fink, Matthias

2014-01-01

Regional social legitimacy of entrepreneurship: implications for entrepreneurial intention and start-up behaviour, Regional Studies. A new understanding of the role of regional culture in the emergence of business start-up behaviour is developed. The focal construct is regional social legitimacy: the perception of the desirability and appropriateness of entrepreneurship in a region. The econometric analysis utilizes a combination of bespoke longitudinal survey data from 65 regions in Austria ...

Laser-start-up system for magnetic mirror fusion

International Nuclear Information System (INIS)

Frank, A.M.; Thomas, S.R.; Denhoy, B.S.; Chargin, A.K.

1976-01-01

A CO 2 laser system has been developed at LLL to provide hot start-up plasmas for magnetic mirror fusion experiments. A frozen ammonia pellet is irradiated with a laser power density in excess of 10 13 W/cm 2 in a 50-ns pulse. This system uses commercially available laser systems. Optical components were fabricated both by direct machining and standard techniques. The technologies used in this system are directly applicable to reactor scale systems

Starting up the Saturne synchrotron

International Nuclear Information System (INIS)

Salvat, M.

1958-02-01

Illustrated by many drawings and graphs, this report describes and comments all operations and measurements to be performed for starting up the Saturne synchrotron until particle acceleration exclusively. The author reports the study of beam as it goes out of the Van de Graaff: experiment of position and stability of the beam axis, study of beam current and geometric characteristics (calibration of the induction probe), experiment of mass separation and proton percentage, and adjustment of regulation and Van de Graaff fall law. In a second part, he reports the optics alignment and the study of optics property (installation of the different sectors, study of inflector end voltage, and influence of inflector position in the chamber). The third part addresses the examination of phenomena associated with injection: injection method and definition of the initial instant, search for injection optimum conditions, study of particle lifetime and of phenomena on the inner probe. The fourth part proposes theoretical additional elements regarding the movement of particles at the injection in the useful area, and phenomena occurring on targets and on the inner probe

Training of power station staff

International Nuclear Information System (INIS)

Dusserre, J.

1993-01-01

ELECTRICITE DE FRANCE currently operates 51 generating stations with 900 and 1300 MW Pressurized Water Reactors while, only 15 years ago, France possessed only a very small number of such stations. It was therefore vital to set up a major training organization to produce staff capable of starting, controlling and maintaining these facilities with a constant eye to improving quality and safety. Operator and maintenance staff training is based on highly-structured training plans designed to match both the post to be filled and the qualifications possessed by the person who is to fill it. It was essential to set up suitable high-performance training resources to handle this fast growth in staff. These resources are constantly being developed and allow EDF to make steady progress in a large number of areas, varying from the effects of human factors to the procedures to be followed during an accident

Dual Cage High Power Induction Motor with Direct Start-up. Design and FEM Analysis

Directory of Open Access Journals (Sweden)

LIVADARU, L.

2013-05-01

Full Text Available This paper presents an investigation on the design of high-power induction motor with special constraints. Direct online start-up and pull-up torque of rather high value represent two of the imposed requirements. Three different structures are analyzed, which involve deep bars, magnetic wedges and double cage respectively. The proposed solution advances a new rotor structure with two different rotor cages. The first cage acts mainly during start-up and is made of iron with both electric and magnetic properties. The second one is made of copper and represents the main rotor winding. It has a particular cross-section of the bars in order to carry into effect the required constraints both during start-up and steady-state. The proposed models are finally evaluated by means of finite element method analysis.

Linking Environmental Orientation to Start-ups’ Networking Activities

DEFF Research Database (Denmark)

Dickel, Petra; Ritter, Thomas

Besides for-profit start-ups, an increasing number of firms start their existence with the purpose to “do good” for society – mirrored in an increasing academic discussion of sustainable firms. Yet, there is little research on the networking activities of start-ups that do not have profit...... generation as their primary focus. Addressing this research gap, we develop hypotheses on the different networking activities of environmentally oriented start-ups arguing that their societal focus has a positive impact on the frequency of their networking and the size of their network. For empirically...... investigating such networking differences, we use data from 179 technology-based start-ups and show that start-ups with a strong external environmental orientation have significantly higher networking frequency and build larger networks. On the contrary, strong internal environmental orientation is linked...

Cooperation between large companies and start-ups: the access to drive disruptive innovation

OpenAIRE

Bruse, Florian; Böhmer, Annette Isabel; Lindemann, Udo

2016-01-01

According to Christopher Clayton’s Innovator’s Dilemma large corporations face a threat of disruptive innovation. By use of products and services with a moderate amount of new technologies, new business models can be created, which later on oust established companies. Particularly start-ups seem to be more prone to drive disruptive innovations than large corporations. This paper illustrates the need for cooperation between large companies and start-ups in order to pursue disruptive innovation...

Comparison between MBR and SBR on Anammox start-up process from the conventional activated sludge.

Science.gov (United States)

Wang, Tao; Zhang, Hanmin; Gao, Dawen; Yang, Fenglin; Zhang, Guangyi

2012-10-01

Anammox start-up performances from the conventional activated sludge were compared between a MBR and SBR. Both the reactors successfully started up Anammox process. The start-up period in the MBR (59 days) was notably shorter than that in the SBR (101 days), and the max nitrogen (NH(4)(+)+NO(2)(-)) removal capacity of 345.2 mg N L(-1) d(-1) in the MBR was also higher than that of 292.0 mg N L(-1) d(-1) in the SBR. FISH analysis showed that Anammox bacteria predominated in both reactors. Phylogenetic analysis further disclosed that the MBR had the better biodiversity of Anammox bacteria and gained a higher ecological stability. Generally, the results showed that MBR exhibited a more excellent performance for Anammox start-up. Crown Copyright © 2012. Published by Elsevier Ltd. All rights reserved.

Start-up performance of parabolic trough concentrating solar power plants

DEFF Research Database (Denmark)

Ferruzza, Davide; Topel, Monika; Basaran, Ibrahim

2017-01-01

Concentrating solar power plants, even though they can be integrated with thermal energy storage, are still subjected to cyclic start-up and shut-downs. As a consequence, in order to maximize their profitability and performance, the flexibility with respect to transient operations is essential...

Analysis of the start-up and control of a particle bed reactor

International Nuclear Information System (INIS)

Lazareth, O.W.; Araj, K.J.; Horn, F.L.; Ludewig, H.; Powell, J.R.

1987-01-01

This study describes the modeling of start-up transients in Particle Bed Reactors (PBR) for burst electric power. Two computer programs have been developed to analyze the start-up process. The first program (named KINETIC) analyzes the entire fuel element, calculating time dependent solutions for power and the temperature distribution in the packed bed. The second program (named SPHEAT, for Spherical Heating) calculates time-dependent temperatures inside individual, cladded fuel particles. The two programs provide powerful analytical tools for evaluation of material and geometrical options, power and time constraints, and conditions that could lead to element failures

System to detect and protect a failure during start-up of pumping-up; Yosui shidochu no jikokenshutsu hogo hoshiki

Energy Technology Data Exchange (ETDEWEB)

Hagiwara, H. [Kansai Electric Power Co. Inc., Osaka (Japan)

1999-12-10

Development was made on a method to detect and protect a failure in a power generation motor operating at a rotation speed other than the rated speed, such as in start-up of pumping-up. Such a failure may not be detected from the ordinary frequency characteristics because the failure current due to short circuit or earth failure is lower than the rated frequency. An idea was conceived to detect flow of low frequency failure current on the armature side by detecting change in the field current being a phenomenal change in the armature current. To realize the idea, the simulation circuits of the parent and child motors of the power generation motors were modeled and verified. The following results were obtained from the verification of a three-phase short circuit failure: when the field current is constant, the failure current is nearly constant regardless of the operating frequency; the failure current flows into the field circuit; because the trajectory of the low frequency overcurrent in the main circuit flowing in case of operation in a low frequency zone presents the similar trajectory to that in 60-Hz operation, the failure may be detected from variation in the field current; and the protection activity after the failure detection is to release the excitation, and attenuate the failure current. (NEDO)

The effects of incubation on academic and non-academic high-tech start-ups: evidence from Italy

OpenAIRE

Colombo, Massimo G.; Piva, Evila; Rentocchini, Francesco

2012-01-01

This study aims at empirically investigating whether technology incubators help academic high-tech start-ups to establish collaborations with other organizations, thus increasing the competitiveness of these firms. In doing so, we take into account the specificities of academic high-tech start-ups with respect to their non-academic counterparts. We compare the effects of incubation on academic and non-academic high-tech start-ups through econometric estimates using a large sample of Italian f...

Anticipated simulation of Angra-1 start-up physical tests

International Nuclear Information System (INIS)

Fernandes, V.B.; Perrotta, J.A.; Silva Ipojuca, T. da; Ponzoni Filho, P.

1981-01-01

Some results foreseen by the Department of Nuclear Fuel (DCN. O) in Furnas for the measurements that will be realized during the start-up integrated tests for Angra-1 are presented. All the forecasting is based on a DCN.O proper correlation methodology, developed from basic physical principles, using computer codes developed by the authors or public computer codes adapted to this methodology. (E.G.) [pt

Good maintenance of exercise-induced bone gain with decreased training of female tennis and squash players: a prospective 5-year follow-up study of young and old starters and controls.

Science.gov (United States)

Kontulainen, S; Kannus, P; Haapasalo, H; Sievänen, H; Pasanen, M; Heinonen, A; Oja, P; Vuori, I

2001-02-01

This prospective 5-year follow-up study of 64 adult female racquet sports players and 27 controls assessed the changes in the playing-to-nonplaying arm bone mineral content (BMC) differences to answer three questions: (1) Are training-induced bone gains lost with decreased training? (2) Is the bone response to decreased training different if the playing career has been started before or at puberty rather than after it? (3) Are the possible bone changes related to the changes in training? The players were divided into two groups according to the starting age of their tennis or squash playing. The mean starting age was 10.5 years (SD, 2.2) among the players who had started training before or at menarche (young starters; n = 36) while 26.4 years (SD, 8.0) among those players who had begun training a minimum of 1 year after menarche (old starters; n = 28). At baseline of the 5-year follow-up, the mean age of the young starters was 21.6 years (SD, 7.6) and that of old starters was 39.4 years (SD, 10.5). During the follow-up, the young starters had reduced the average training frequency from 4.7 times a week (2.7) to 1.4 times a week (1.3) and the old starters from 4.0 times a week (1.4) to 2.0 times a week (1.4), respectively. The 5-year follow-up revealed that despite reduced training the exercise-induced bone gain was well maintained in both groups of players regardless of their clearly different starting age of activity and different amount of exercise-induced bone gain. The gain was still 1.3-2.2 times greater in favor of the young starters (at the follow-up, the dominant-to-nondominant arm BMC difference was 22% [8.4] in the humeral shaft of the young starters versus 10% [3.8] in the old starters, and 3.5% [2.4] in controls). In the players, changes in training were only weakly related to changes in the side-to-side BMC difference (r(s) = 0.05-0.34, all NS), and this was true even among the players who had stopped training completely a minimum 1 year before the

P.S. I love you...and other growth hacking strategies used by disruptive tech start-ups : A case study on the relevance and enactment of growth hacking by Sweden's tech start-ups

OpenAIRE

Bergendal, Taghrid Sara

2017-01-01

Disruption innovation theory has been the zeitgeist for building globally disruptive tech companies since 1997. One decade later, disruptive tech start-ups are moving away from traditional marketing strategies in favour of growth hacking. There is a seemingly growing consensus by online tech experts, tech entrepreneurs, advisors and investors, that suggests that growth hacking is becoming increasingly important practice for disruption based tech start-ups. Furthermore, Sweden is becoming the ...

Balance of the first 1300MW units start-up phase

International Nuclear Information System (INIS)

Meclot, M.; Lemagny, M.; Lavogiez, M.

1985-01-01

The program of tests is briefly recalled. Then, a balance of the incident cards is presented. After a recall of the lessons to be drawn from the start-up phase, a comparative examination of the 1300 and 900 unit availability is presented for the first operating year [fr

Preliminary analyses for HTTR's start-up physics tests by Monte Carlo code MVP

International Nuclear Information System (INIS)

Nojiri, Naoki; Nakano, Masaaki; Ando, Hiroei; Fujimoto, Nozomu; Takeuchi, Mitsuo; Fujisaki, Shingo; Yamashita, Kiyonobu

1998-08-01

Analyses of start-up physics tests for High Temperature Engineering Test Reactor (HTTR) have been carried out by Monte Carlo code MVP based on continuous energy method. Heterogeneous core structures were modified precisely, such as the fuel compacts, fuel rods, coolant channels, burnable poisons, control rods, control rod insertion holes, reserved shutdown pellet insertion holes, gaps between graphite blocks, etc. Such precise modification of the core structures was difficult with diffusion calculation. From the analytical results, the followings were confirmed; The first criticality will be achieved around 16 fuel columns loaded. The reactivity at the first criticality can be controlled by only one control rod located at the center of the core with other fifteen control rods fully withdrawn. The excess reactivity, reactor shutdown margin and control rod criticality positions have been evaluated. These results were used for planning of the start-up physics tests. This report presents analyses of start-up physics tests for HTTR by MVP code. (author)

Characteristics Contributing to High-Technology Start-Up Success

DEFF Research Database (Denmark)

Goslin, L.; Brown, W.; Palm, T.

1993-01-01

that the professional venture-capital-funded start-up firm will generally reflect the practices of perceptive management regarding: style, team approach, structure of the firm, market definition, culture, vision, and a formal strategy. Nevertheless, there are some questions about differences those characteristics...... by interview to provide insights on: the entrepreneurial-marketing style utilized, cultural characteristics of the firm, and perspectives of the time horizon of strategy. The representative firms (seven firms to a set) from whom information was solicited were drawn from the U.S. Pacific Northwest), Denmark...

Second Harmonic 110 GHz ECH-assisted Start-up in KSTAR

Directory of Open Access Journals (Sweden)

Han S. H.

2012-09-01

Full Text Available In KSTAR device, a 110 GHz ECH system has been a useful heating device for a stable plasma start-up because a pure ohmic discharge scenario with a limited loop voltage of about 4 V was sometimes not successful for burn-through and plasma current ramp-up due to inconsistent wall conditioning and density control. Even though a pure ohmic discharge also was successful, the application of X2-mode ECH could reduce the flux consumption of poloidal field coils, leading to long pulse discharges. The ECH power was injected at the time of the field null formation after the onset of the toroidal electric field in which the electron temperature significantly increased up to 100 eV so that burn-through is overcome. The ECH heating enabled the formation of close flux surfaces earlier, leading to the reliable plasma current ramp-up, but, it caused outward plasma movement and failure of the plasma control, resulting in loss of the discharge. Moreover, impurities from the plasma facing components caused by not fully absorbed ECH power had a detrimental effect on the H-mode transition. In ECH-assisted start-up in the ramp-up phase, ECH power was mainly used for central electron heating, leading to reduction of the flux consumption of the central coils by increasing the electron temperature along with a density increase in the ramp-up phase. When X2-mode ECH power of 350 kW was injected at the mid-plane with a toroidal angle of 10 degree for 1 sec after the onset of the loop voltage, the flux consumption was reduced by about 30% in comparison with the pure ohmic discharges.

Business start-ups and the effect of coaching programs

OpenAIRE

Loersch, Christian

2015-01-01

Entrepreneurship is known to be a main driver of economic growth. Hence, governments have an interest in supporting and promoting entrepreneurial activities. Start-up subsidies, which have been analyzed extensively, only aim at mitigating the lack of financial capital. However, some entrepreneurs also lack in human, social, and managerial capital. One way to address these shortcomings is by subsidizing coaching programs for entrepreneurs. However, theoretical and empirical evidence about busi...

Opportunity identification and evaluation in franchisee business start-ups

OpenAIRE

Brookes, Maureen; Altinay, Levent; Wang, Xuan Lorna; Yeung, Ruth

2016-01-01

Purpose - This paper examines franchisees’ business start-ups from an entrepreneurial perspective, adopting a process representative of entrepreneurship to examine opportunity identification and evaluation by franchisees and to analyse factors that influence this process.\\ud \\ud Design/methodology/approach - A qualitative study was employed and data collected using semi-structured interviews with a sample of service industry franchisees in Macau.\\ud \\ud Findings - The study identifies that so...

Simulations and field tests of a reactor coolant pump emergency start-up by means of remote gas units

International Nuclear Information System (INIS)

Omahen, P.; Gubina, F.

1992-01-01

The problem of the reactor coolant pump start-up in case of emergency by means of remote gas power plant units was analyzed. In this paper a simulation model is developed which enabled a detailed simulation of the transient process occurring at the start-up. The start-up of the RCP motor set was simulated in case of available one and two gas units. The field tests were performed and the measured variable values complied well with the simulation results. Two gas units have been determined as a safe start-up scheme of the RCP motor set considering for safety reasons accepted busbars and motor protection settings. A derived model for deep rotor bars was experimentally confirmed as effective means for the RCP motor set start-up transient simulation. Start-up procedures have been designed and adopted to the safety procedures of the Nuclear Power Plant Krsko

SuperJet International case study: a business network start-up in the aeronautics industry

Science.gov (United States)

Corallo, Angelo; de Maggio, Marco; Storelli, Davide

This chapter presents the SuperJet International case study, a start-up in the aeronautics industry characterized by a process-oriented approach and a complex and as yet evolving network of partnerships and collaborations. The chapter aims to describe the key points of the start-up process, highlighting common factors and differences compared to the TEKNE Methodology of Change, with particular reference to the second and third phase, namely, the design and deployment of new techno-organizational systems. The SuperJet International startup is presented as a case study where strategic and organizational aspects have been jointly conceived from a network-driven perspective. The chapter compares some of the guidelines of the TEKNE Methodology of Change with experiences and actual practices deriving from interviews with key players in SJI's start-up process.

A simple and effective method to achieve the successful start-up of a current reference

International Nuclear Information System (INIS)

Han Lei; Zhang Xiaoxing; Dai Yujie; Lü Yingjie; Wang Yujun

2012-01-01

Start-up design is a critical issue in current reference as it is very closely related to production yield. However, its function is difficult to predict using normal transaction simulations before the device is put into diffusion. In this paper, we discuss a simple and effective simulation approach which ensures a successful start-up process in a self-biased temperature independent current reference. The circuit is implemented in a class-D power amplifier with a 0.35 μm BiCMOS process and the experimental result validates that, by using this method, the start-up success rate can be greatly improved to 100%. (semiconductor integrated circuits)

Bypass line assisted start-up of a loop heat pipe with a flat evaporator

International Nuclear Information System (INIS)

Boo, Joon Hong; Jung, Eui Guk

2009-01-01

Loop heat pipes often experience start-up problems especially under low thermal loads. A bypass line was installed between the evaporator and the liquid reservoir to alleviate the difficulties associated with start-up of a loop heat pipe with flat evaporator. The evaporator and condenser had dimensions of 40 mm (W) by 50 mm (L). The wall and tube materials were stainless steel and the working fluid was methanol. Axial grooves were provided in the flat evaporator to serve as vapor passages. The inner diameters of liquid and vapor transport lines were 2 mm and 4 mm, respectively, and the length of the two lines was 0.5 m each. The thermal load range was up to 130 W for horizontal alignment with the condenser temperature of 10 .deg. C. The experimental results showed that the minimum thermal load for start-up was lowered by 37% when the bypass line was employed

Fort St. Vrain Nuclear Generating Station. Semiannual operations report, January--June 1975

International Nuclear Information System (INIS)

1975-01-01

The reactor was in start-up testing during this period. Information is presented concerning fuel and equipment performance; changes in facility design; procedures; testing; staff; licensed operator training; surveillance; power generation; maintenance; shutdowns, primary coolant chemistry; radiation exposure; fission product release; solid wastes; and radioactive effluents

A current profile model for magnetic analysis of the start-up phase of toroidal plasmas driven by electron cyclotron heating and current drive

International Nuclear Information System (INIS)

Yoshinaga, T.; Uchida, M.; Tanaka, H.; Maekawa, T.

2007-01-01

An estimation model of plasma current density distribution for the start-up phase of toroidal plasmas generated by electron cyclotron heating (ECH) in the low aspect ratio torus experiment device is presented. The model assumes a power law parabolic current profile having seven fitting parameters. Its position, extent and broadness (or steepness) are fitted by adjusting these parameters to the observed magnetic flux signals. The adequacy of the model has been examined and confirmed by comparisons of the reconstructed current profiles and the resultant poloidal flux surfaces with the plasma images at visible light range at various stages of start-up discharges, including both the initial open field phase, the subsequent closed field phase, the current decay phase after ECH is turned off and also by a current-profile limiting experiment. This method may be useful for the study of non-inductive start-up experiments by ECH, where there is no appropriate MHD constraint on the current distribution as that in the full tokamak discharge plasmas

First start-up of nuclear criticality safety experiment facility for uranyl nitrate solution

International Nuclear Information System (INIS)

Zhu Qingfu; Shi Yongqian; Shen Leisheng; Hu Dingsheng; Zhao Shouzhi; He Tao; Sun Zheng; Lin Shenghuo; Yao Shigui

2005-01-01

The uranyl nitrate solution experiment facility for the research on nuclear criticality safety is described. The nuclear fuel loading steps in the first start-up for water-reflected core are presented. During the experiments, the critical volume of uranyl nitrate solution was determined as 20479.62 mL with count rate inverse extrapolation method, reactivity interpolation method, and steady power method. By calculation, critical mass of 235 U was derived as 1579.184 g from experimental data. The worth of control rods was also calibrated in the first start-up of the facility. (authors)

Optimization of the sizes and dates of starting up of reprocessing plants

International Nuclear Information System (INIS)

Nagashima, Kikusaburo

1977-01-01

It is desirable to complete the nuclear fuel cycle domestically for promoting nuclear power generation in Japan, and the reprocessing of spent fuel is indispensable. However, the capacity of the reprocessing plant in PNC and the reprocessing by the commissioning to foreign countries will be insufficient by the latter half of 1980s. In the planning of the second reprocessing plant in Japan, the following problems remain yet to be solved. The international regulation and the laws in Japan regarding the storage and transport of spent fuel, the disposal of radioactive wastes, and the recycling of plutonium must be established. The consensus of the public on the necessity and the safety of fuel reprocessing must be obtained. The technical investigation about fuel reprocessing and related business must be carried out sufficiently, including the necessity of introducing the technology from abroad. The economy and various conditions for industrializing fuel reprocessing must be studied. The economy of fuel reprocessing plants, the reprocessing cost taking escalation into account, mean reprocessing cost, the optimization of the time of starting full operation and the time of starting-up, the rise of reprocessing cost due to the escalation of operational cost are explained. Numerical calculation was carried out about the second reprocessing plant in Japan, and the results are examined. (Kako, I.)

Graduate Career-Making and Business Start-Up: A Literature Review

Science.gov (United States)

Nabi, Ghulam; Holden, Rick; Walmsley, Andreas

2006-01-01

Purpose: The purpose of this article is to provide a selective review of literature on the career-related decision-making processes in terms of the transition from student to business start-up, and the nature and influence of support and guidance. Design/methodology/approach: Primarily, a critical review of a range of recently published literature…

Procedure of determination of the nuclear reactor start-up power

International Nuclear Information System (INIS)

Brandt, K.D.; Griese, K.; Guehne, F.

1985-01-01

The invention has been aimed at a determination of the thermal reactor power during the start-up period and the commissioning resp. preferably under an extremely low thermal power in a range from 0.001 to 1%. In addition to it also the power range up to 100% shall be covered. The external gamma-ray flux density as a function of the thermal reactor power is measured in several overlapping partial measuring ranges. A suitable measuring device transforms the input signals into an electrically measured quantity proportional to the reactor power

Start-up and bacterial community compositions of partial nitrification in moving bed biofilm reactor.

Science.gov (United States)

Liu, Tao; Mao, Yan-Jun; Shi, Yan-Ping; Quan, Xie

2017-03-01

Partial nitrification (PN) has been considered as one of the promising processes for pretreatment of ammonium-rich wastewater. In this study, a kind of novel carriers with enhanced hydrophilicity and electrophilicity was implemented in a moving bed biofilm reactor (MBBR) to start up PN process. Results indicated that biofilm formation rate was higher on modified carriers. In comparison with the reactor filled with traditional carriers (start-up period of 21 days), it took only 14 days to start up PN successfully with ammonia removal efficiency and nitrite accumulation rate of 90 and 91%, respectively, in the reactor filled with modified carriers. Evident changes of spatial distributions and community structures had been detected during the start-up. Free-floating cells existed in planktonic sludge, while these microorganisms trended to form flocs in the biofilm. High-throughput pyrosequencing results indicated that Nitrosomonas was the predominant ammonia-oxidizing bacterium (AOB) in the PN system, while Comamonas might also play a vital role for nitrogen oxidation. Additionally, some other bacteria such as Ferruginibacter, Ottowia, Saprospiraceae, and Rhizobacter were selected to establish stable footholds. This study would be potentially significant for better understanding the microbial features and developing efficient strategies accordingly for MBBR-based PN operation.

Do Specific Growth Drivers Exist for Firms? A Regional Analysis of Start-ups and Industrial Growth

Directory of Open Access Journals (Sweden)

PAUL I. OJEAGA

2016-06-01

Full Text Available The study of start-ups, have remained largely a micro economic issue. Firms are the key drivers of industrial sector GDP (or enterprise growth in countries across regions. Few studies have tried to examine the consequence of start-ups in the broad macroeconomics terms on enterprise growth in general with special emphasis on industrial sector output. This study provides a macroeconomic study of the effect of start- ups on industrial sector growth for countries in some specific geographical regions of the world. Panel data is utilized due to it obvious advantages such its ability to utilize a panel of short time frames and its suitability for controlling for omitted variable bias and unobservable heterogeneity across regions. The results show that start-ups remain an intrinsic variable for enterprise growth and industrial sector output discussion in general.

Careers at Biotech Start-Ups and in Entrepreneurship.

Science.gov (United States)

Froshauer, Susan

2017-11-01

The world of biotechnology "start-ups" and entrepreneurship offers exciting new avenues for driving state-of-the-art research using an arsenal of multidisciplinary skills, whether your role is as part of a team or as a leader. Although traditionally these positions may not be as secure as those offered by some of the larger companies, the small start-up culture provides opportunities for contributing at many levels to a wide range of responsibilities: from scientific discovery to delivery of proof of concept and intellectual property; from analysis of market opportunities and competitive intelligence to creation of time lines and business plans for a first product. Often, if you get in on the ground level, you get to validate your own concept, pitch to potential investors, argue value, build a team, engage advisors, and then, with funding in hand, launch an entirely new research and development (R&D) enterprise. Many of the skills and much of the experience gained while pursuing a graduate degree can be put to good use in these arenas as well. This path, however, is not for the faint of heart; it requires not only a strong scientific background and organizational skills, but also the ability to work well on a team, excellent communication skills, and persistence when faced with delays or disappointment. With increasing responsibilities in the small company come the requirements for aptitudes for leadership, strategic and financial planning, networking, negotiating, and managing both projects and personnel. Copyright © 2017 Cold Spring Harbor Laboratory Press; all rights reserved.

Viscoelasticity, nonlinear shear start-up, and relaxation of entangled star polymers

KAUST Repository

Snijkers, Frank; Ratkanthwar, Kedar; Vlassopoulos, Dimitris; Hadjichristidis, Nikolaos

2013-01-01

in recent studies. Reliable data for these highly entangled stars could be obtained for Weissenberg numbers below 300. The appearance of a stress overshoot during start-up with a corresponding strain approaching a value of 2 suggests that in the investigated

Start-Up Characteristics of a Granule-Based Anammox UASB Reactor Seeded with Anaerobic Granular Sludge

Directory of Open Access Journals (Sweden)

Lei Xiong

2013-01-01

Full Text Available The granulation of anammox sludge plays an important role in the high nitrogen removal performance of the anammox reactor. In this study, anaerobic granular sludge was selected as the seeding sludge to start up anammox reactor in order to directly obtain anammox granules. Results showed that the anammox UASB reactor was successfully started up by inoculating anaerobic granular sludge, with substrate capacity of 4435.2 mg/(L·d and average ammonium and nitrite removal efficiency of 90.36% and 93.29%, respectively. During the start-up course, the granular sludge initially disintegrated and then reaggregated and turned red, suggesting the high anammox performance. Zn-Fe precipitation was observed on the surface of granules during the operation by SEM-EDS, which would impose inhibition to the anammox activity of the granules. Accordingly, it is suggested to relatively reduce the trace metals concentrations, of Fe and Zn in the conventional medium. The findings of this study are expected to be used for a shorter start-up and more stable operation of anammox system.

Start-Up Characteristics of a Granule-Based Anammox UASB Reactor Seeded with Anaerobic Granular Sludge

Science.gov (United States)

Wang, Yun-Yan; Tang, Chong-Jian; Chai, Li-Yuan; Xu, Kang-Que; Song, Yu-Xia

2013-01-01

The granulation of anammox sludge plays an important role in the high nitrogen removal performance of the anammox reactor. In this study, anaerobic granular sludge was selected as the seeding sludge to start up anammox reactor in order to directly obtain anammox granules. Results showed that the anammox UASB reactor was successfully started up by inoculating anaerobic granular sludge, with substrate capacity of 4435.2 mg/(L·d) and average ammonium and nitrite removal efficiency of 90.36% and 93.29%, respectively. During the start-up course, the granular sludge initially disintegrated and then reaggregated and turned red, suggesting the high anammox performance. Zn-Fe precipitation was observed on the surface of granules during the operation by SEM-EDS, which would impose inhibition to the anammox activity of the granules. Accordingly, it is suggested to relatively reduce the trace metals concentrations, of Fe and Zn in the conventional medium. The findings of this study are expected to be used for a shorter start-up and more stable operation of anammox system. PMID:24455691

WYKORZYSTANIE METODY DAVE’A BERKUSA DO ANALIZY POTENCJAŁU ROZWOJOWEGO FIRM START-UP W POLSCE

OpenAIRE

Gemzik-Salwach, Agata

2014-01-01

Celem niniejszego artykułu była ocena potencjału rozwojowego firm start-up w Polsce. W artykule przedstawione zostały metody oceny przedsiębiorstw start-up oraz wyniki badań własnych poświęconych potencjałowi firm start-up w Polsce. Pierwszą część artykułu stanowi opis cech charakterystycznych młodych spółek i możliwych sposobów ich wyceny. Kolejna cześć artykułu obejmuje szczegółowe omówienie wyników przeprowadzonych badań. W badaniach wykorzystano powstałą na bazie doświadczeń amerykańskieg...

Megawatt Power Level 120 GHz Gyrotrons for ITER Start-Up

Energy Technology Data Exchange (ETDEWEB)

Choi, E M; Marchewka, C; Mastovsky, I; Shapiro, M A; Sirigiri, J R; Temkin, R J [MIT - Plasma Science and Fusion Center, NW16-186, 167 Albany Street, Cambridge, MA 02139 (United States)

2005-01-01

We report operation of a 110 GHz gyrotron with 1.67 MW of output power measured in short pulses (3{mu}s) at an efficiency of 42% in the TE{sub 22,6} mode. We also present a preliminary design of a 1 MW, 120 GHz gyrotron for ITER start-up with an efficiency greater than 50%.

Megawatt Power Level 120 GHz Gyrotrons for ITER Start-Up

International Nuclear Information System (INIS)

Choi, E M; Marchewka, C; Mastovsky, I; Shapiro, M A; Sirigiri, J R; Temkin, R J

2005-01-01

We report operation of a 110 GHz gyrotron with 1.67 MW of output power measured in short pulses (3μs) at an efficiency of 42% in the TE 22,6 mode. We also present a preliminary design of a 1 MW, 120 GHz gyrotron for ITER start-up with an efficiency greater than 50%

Effect of the Modification of the Start-Up Sequence on the Thermal Stresses for a Microgas Turbine

Directory of Open Access Journals (Sweden)

Oscar Tenango-Pirin

2016-01-01

Full Text Available Microgas turbines (MGT are an alternative for small-scale energy production; however, their small size becomes a drawback since it enhances the heat transfer among their components. Moreover, heat transfer drives to temperature gradients which become higher during transient cycles like start-up. The influence of different start-up curves on temperature and thermal stresses of a microgas turbine was investigated. Stationary and rotational blades of the turbine were numerically simulated using CFD and FEM commercial codes. Conjugated heat transfer cases were solved for obtaining heat transfer from fluid toward the blades. Changes of temperature gradients within the blades during the start-ups were calculated under transient state with boundary conditions according to each curve to assess accurate thermal stresses calculations. Results showed that the modification of the start-up curves had an impact on the thermal stresses levels and on the time when highest stresses appeared on each component. Furthermore, zones highly stressed were located near the constraints of blades where thermal strains are restricted. It was also found that the curve that had a warming period at the beginning of the start-up allowed reducing the peaks of stresses making it more feasible and safer for the turbine start-up operation.

Factors influencing person’s decision to start-up business

OpenAIRE

Žukauskas, Pranas; Stripeikis, Osvaldas

2011-01-01

Many scientists try to analyze factors influencing the business start-up process. It is obvious that in nowadays economy the level of entrepreneurship allows a country to obtain competitive advantages. The European Commission in a Green paper on "Entrepreneurship in Europe" focuses on a question about businesses growing among Europeans. At a time when governments are facing the challenge of how to revive their economies, fostering entrepreneurship could be one of the main stimuli to raise the...

Baikal-1 stand complex. Preparation and carrying out of the first energy start-up of the IVG-1 reactor

International Nuclear Information System (INIS)

Tikhomirov, L.N.

1995-01-01

The IVG-1 reactor was a first ground prototype of nuclear rocket engine. The reactor was built on the site 10 of the Semipalatinsk test site. Since the first energy start-up in 1975 the reactor was exploited 14 years till its modernization in 1989. The Bajkal-1 stand complex was designed and built for the carrying out of tests for fuel assemblies of different modifications. The energy start-up has been sum of long creative work of different research and constructive staffs on creation of high-temperature gas-cooled IVG-1 reactor. The history of construction, project and assembling of the stand complex is presented. Complex start and put works were carried out in the December 1974. Control physical start-up was carried out in the January 1975. Cold start-up by hydrogen was in the February 1975. Hot start-up was in the March 1975. The result of the hot start-up was experimental confirmation of metodics of thermohydrovlical estimations. 2 figs., 3 tabs

Lean and Global Technology Start-ups: Linking the Two Research Streams

DEFF Research Database (Denmark)

Lemminger, Roy; Svendsen, Lars Limkilde; Zijdemans, Erik

2014-01-01

stream is well established focuses on International New Ventures (INVs) or Born Global (BG) firms (Oviatt & McDougall, 1994; Knight and Cavusgil, 1996); the second one is in the process of emerging and deals with lean start-ups (Ries, 2011; Blank, 2013). It is our intention to show that the problems...... these two groups of firms face during the early stages of their existence are to a large extent identical and could, from a theoretical point of view, be analyzed in a unified way. Integrating the two research perspectives above gives rise to a number of interesting research questions that could...... be summarized as follows: a) How do new technology start-ups narrow down the scope of their business activities by effectuating the global dimensions of their businesses? What are the reasons for such firms to look for global resources, partnerships or markets right from inception? b) What makes it possible...

Renewing skills and integrating new generations

International Nuclear Information System (INIS)

Hautemule, M.; Cassingena, J.

2017-01-01

The French nuclear industry is made up of 2500 enterprises of any size from family businesses to large groups via medium-sized enterprises and start-ups. In order to face new projects and to ensure the continuity and preservation of technical know-how and to develop skills, nuclear industry as any high-tech industry invests a lot of money in training. In 2017 the needs of training for EDF, AREVA and CEA employees summed up to 370 million euros representing 4.5 millions hours of technical training. In CEA, EDF and AREVA, colleges of experts have been created. For instance the knowledge of EDF experts specialised in the design of the first generation of reactors is very useful to prepare the dismantling of these reactors. In CEA, an average of 15 years are necessary to train an expert and 4 levels of expertise have been defined. AREVA has implemented in its staff management a tool to detect the risk of losing a specific skill and to prevent this loss by a provisional policy of recruitment. (A.C.)

Optimization of Outer Poloidal Field (PF) Coil Configurations for Inductive PF Coil-only Plasma Start-up on Spherical Tori

International Nuclear Information System (INIS)

Wonho Choe; Jayhyun Kim; Masayuki Ono

2004-01-01

The elimination of in-board ohmic heating solenoid is required for the spherical torus (ST) to function as an attractive fusion power plant. An in-board ohmic solenoid, along with the shielding needed for its insulation, increases the size and, hence, the cost of the plant. Here, we investigate using static as well as dynamic codes in ST geometries a solenoid-free start-up concept utilizing a set of out-board poloidal field coils. By using the static code, an optimization of coil positions as well as coil currents was performed to demonstrate that it is indeed possible to create a high quality multi-pole field null region while retaining significant flux (volt-seconds) needed for the subsequent current ramp-up. With the dynamic code that includes the effect of vacuum vessel eddy currents, we then showed that it is possible to maintain a large size field null region for several milliseconds in which sufficient ionization avalanche can develop in the applied toroidal electric field. Under the magnetic geometry typical of a next generation spherical torus experiment, it is shown that the well-known plasma breakdown conditions for conventional ohmic solenoid start-up of E(sub)TB(sub)T/B(sub)P ∼ (0.1-1) kV/m with V(sub)loop ∼ 6 V can be readily met while retaining significant volt-seconds ∼ 4 V-S sufficient to generate multi-MA plasma current in STs

[Empathy, inter-professional collaboration, and lifelong medical learning in Spanish and Latin-American physicians-in-training who start their postgraduate training in hospitals in Spain. Preliminary outcomes].

Science.gov (United States)

San-Martín, Montserrat; Roig-Carrera, Helena; Villalonga-Vadell, Rosa M; Benito-Sevillano, Carmen; Torres-Salinas, Miquel; Claret-Teruel, Gemma; Robles, Bernabé; Sans-Boix, Antonia; Alcorta-Garza, Adelina; Vivanco, Luis

2017-01-01

To identify similarities and differences in empathy, abilities toward inter-professional collaboration, and lifelong medical learning, between Spanish and Latin-American physicians-in-training who start their posgraduate training in teaching hospitals in Spain. Observational study using self-administered questionnaires. Five teaching hospitals in the province of Barcelona, Spain. Spanish and Latin-American physicians-in-training who started their first year of post-graduate medical training. Empathy was measured using the Jefferson scale of empathy. Abilities for inter-professional collaboration were measured using the Jefferson scale attitudes towards nurse-physician collaboration. Learning was measured using the Jefferson scale of medical lifelong learning scale. From a sample of 156 physicians-in-training, 110 from Spain and 40 from Latin America, the Spanish group showed the highest empathy (pempathy and inter-professional collaboration for the whole sample (r=+0.34; pempathy in the development of inter-professional collaboration abilities. In Latin-American physicians who start posgraduate training programs, lifelong learning abilities have a positive influence on the development of other professional competencies. Copyright © 2016 Elsevier España, S.L.U. All rights reserved.

Analytic method study of point-reactor kinetic equation when cold start-up

International Nuclear Information System (INIS)

Zhang Fan; Chen Wenzhen; Gui Xuewen

2008-01-01

The reactor cold start-up is a process of inserting reactivity by lifting control rod discontinuously. Inserting too much reactivity will cause short-period and may cause an overpressure accident in the primary loop. It is therefore very important to understand the rule of neutron density variation and to find out the relationships among the speed of lifting control rod, and the duration and speed of neutron density response. It is also helpful for the operators to grasp the rule in order to avoid a start-up accident. This paper starts with one-group delayed neutron point-reactor kinetics equations and provides their analytic solution when reactivity is introduced by lifting control rods discontinuously. The analytic expression is validated by comparison with practical data. It is shown that the analytic solution agrees well with numerical solution. Using this analytical solution, the relationships among neutron density response with the speed of lifting control rod and its duration are also studied. By comparing the results with those under the condition of step inserted reactivity, useful conclusions are drawn

Robotic surgery start-up with a fellow as the console surgeon

DEFF Research Database (Denmark)

Reinhardt, Susanne; Ifaoui, Inge Boetker; Thorup, Jorgen

2017-01-01

learning curve for robotic pyeloplasty will allow pediatric urology fellowship programs to be integrated in the start-up phase of a pediatric robotic program even though the case material is limited. Operative success rates were in accordance with the gold standard of open surgery....

Smart or diverse start-up teams? Evidence from a field experiment

NARCIS (Netherlands)

Hoogendoorn, S.; Parker, S.C.; van Praag, M.

2017-01-01

This paper explores the relationship between cognitive abilities and team performance in a start-up setting. We argue that performance in this setting hinges on three tasks: opportunity recognition, problem solving, and implementation. We theorize that cognitive ability at the individual level has a

Questions abound as start-up nears for physician data bank.

Science.gov (United States)

Gardner, E; Wagner, L; Burda, D

1990-07-02

The start-up of the National Practitioner Data Bank is only weeks away, but hospitals and physicians still are raising questions about the system's pros and cons. While most laud the data bank's original mission--to prevent practitioners from concealing a history of incompetence--many physicians claim the scope of the system has grown too big and fear abuse of the information.

DBSSP - A computer program for simulation of controlled circulation boiler and natural circulation boiler start up behavior

International Nuclear Information System (INIS)

Li Bin; Chen Tingkuan; Yang Dong

2005-01-01

In this paper, a computer program, Drum Boiler Start-up Simulation Program (DBSSP), is developed for simulating the start up behavior of controlled circulation and natural circulation boilers. The mathematical model developed here is based on the first principles of mass, energy and momentum conservations. In the boiler model, heat transfer in the waterwall, the superheater, the reheater and the economizer is simulated by the distributing parameter method, while heat transfer in the drum and the downcomer is simulated by lumped parameter analysis. The program can provide detailed flow and thermodynamic characteristics of the boiler components. The development of this program is based only on design data, so it can be used for any subcritical, controlled or natural circulation boiler. The simulation results were compared with experimental measurements, and good agreements between them were found. This program is expected to be useful for predicting the characteristics and the performance of controlled circulation and natural circulation boilers during the start up process. It also can be used to optimize a start up system for minimum start up time

Status report about the works for the start up of the RA-0 'zero power' nuclear reactor at the Cordoba National University

International Nuclear Information System (INIS)

Martin, H.R; Carballido, C.; Oliveras, T.

1991-01-01

After two years of works at the Cordoba National University for the new start-up of the RA-0 'zero power' nuclear reactor, the results obtained are herein presented. Starting with practically null infrastructure at the beginning, specially in human resources and instrumentation of the reactor, the objectives can be considered satisfactory. The training in work of the future operational staff, the design and the construction of the instrumentation and the fitting of the installations are the principal items described in this paper. An special attention is devoted to the insertion of this type of installation in the university organization, usually not prepared for the quality and control activities, which is necessarily considered in these type of works. (Author) [es

Experience in start-up of the South-Ukrainian-2 power unit with the WWER-1000 reactor

International Nuclear Information System (INIS)

Belov, Yu.V.; Kazakov, V.A.; Kirilov, V.V.; Kryakvin, L.V.

1987-01-01

The volume, sequence and dates of works fulfilled during hot testing, physical and power start-ups and while bringing output of the South-Ukranian-2 power unit with the WWER-1000 reactor to the design figure are described. The works were fulfilled according to the standard schedules from October in 1984 till April in 1985. Combination of the stages and intensification of works before the physical start-up have allowed to shorten the dates by 90 days as compared to the schedule. The physical and power start-ups, including bringing reactor output to the design figure, were performed during 140 days, that permits to shorten the dates by 20 days more. The results of physical experiments carried out at the South-Ukranian-2 power unit, are in good agreement with the data obtained at the first power units of the given and Kalinin NPPs. Besides, during physical and power start-ups additional measures ensuring nuclear safety are developed

Emissions Characterisation of residential pellet boilers during start-up and stop periods

OpenAIRE

Win, Kaung Myat; Paavilainen, Janne; Persson, Tomas

2010-01-01

In this study, gaseous emissions and particles are measured during start-up and stop periods for an over-fed boiler and an under-fed boiler. Both gaseous and particulate matter emissions are continuously measured in the laboratory. The measurement of gaseous emissions includes oxygen (O2), carbon dioxide (CO2), carbon monoxide (CO), nitrogen oxide and (NO). The emissions rates are calculated from measured emissions concentrations and flue gas flow. The behaviours of the boilers during start-u...

A novel transient wall heat transfer approach for the start-up of SI engines with gasoline direct injection

Science.gov (United States)

Lejsek, David; Kulzer, André; Hammer, Jürgen

2010-11-01

The introduction of CO2-reduction technologies like Start-Stop or the Hybrid-Powertrain and the worldwide stringent emission legislation require a detailed optimization of the engine start-up. The combustion concept development as well as the calibration of the engine control unit makes an explicit thermodynamic analysis of the combustion process during the start-up necessary. Initially, the well-known thermodynamic analysis of in-cylinder pressure at stationary condition was transmitted to the highly non-stationary engine start-up. For this running mode of the engine the current models for calculation of the transient wall heat fluxes were found to be misleading. With a fraction of nearly 45% of the burned fuel energy, the wall heat is very important for the calculation of energy balance and for the combustion process analysis. Based on the measurements of transient wall heat transfer densities during the start-up presented in a former work (Lejsek and Kulzer in Investigations on the transient wall heat transfer at start-up for SI engines with gasoline direct injection. SAE Paper), the paper describes the development of adaptations to the known correlations by Woschni (MTZ 31:491, 1970), Hohenberg (Experimentelle Erfassung der Wandwärme von Kolbenmotoren. TU Graz, Habil., 1980) and Bargende (Ein Gleichungsansatz zur Berechnung der instationären Wandwärmeverluste im Hochdruckteil von Ottomotoren. TH Darmstadt, PhD-Thesis, 1991) for the application during engine start-up. To demonstrate the high accuracy of the model, the results of the cyclic resolved thermodynamic analysis using the presented novel approaches were compared with the results of the measurements. It is shown, that the novel heat flux models for the engine start-up process gives a cyclic resolved thermodynamic analysis to optimize the engine start-up pretty efficient.

Internationalisation of high-tech start-ups and fast growth-evidence for UK and Germany

OpenAIRE

Bürgel, Oliver; Fier, Andreas; Licht, Georg; Murray, Gordon

2000-01-01

For firms acting in technological niches the expansion into foreign markets can be a way to increase sales and to thus to recover initial sunk costs over a shorter time frame. Our research, based on survey data for nearly 600 British and German high-tech start-ups, examines whether internationalisation leads to faster growth among high-tech start-ups. Results show that firms with international sales have higher sales growth than firms that sell only domestically. We find that technological so...

Preliminary analyses for HTTR`s start-up physics tests by Monte Carlo code MVP

Energy Technology Data Exchange (ETDEWEB)

Nojiri, Naoki [Science and Technology Agency, Tokyo (Japan); Nakano, Masaaki; Ando, Hiroei; Fujimoto, Nozomu; Takeuchi, Mitsuo; Fujisaki, Shingo; Yamashita, Kiyonobu

1998-08-01

Analyses of start-up physics tests for High Temperature Engineering Test Reactor (HTTR) have been carried out by Monte Carlo code MVP based on continuous energy method. Heterogeneous core structures were modified precisely, such as the fuel compacts, fuel rods, coolant channels, burnable poisons, control rods, control rod insertion holes, reserved shutdown pellet insertion holes, gaps between graphite blocks, etc. Such precise modification of the core structures was difficult with diffusion calculation. From the analytical results, the followings were confirmed; The first criticality will be achieved around 16 fuel columns loaded. The reactivity at the first criticality can be controlled by only one control rod located at the center of the core with other fifteen control rods fully withdrawn. The excess reactivity, reactor shutdown margin and control rod criticality positions have been evaluated. These results were used for planning of the start-up physics tests. This report presents analyses of start-up physics tests for HTTR by MVP code. (author)

Start-up phase assessment of a UASB-Septic tank system treating domestic septage

International Nuclear Information System (INIS)

Ali, M.; Al-Saed, R.; Mahmoud, N.

2007-01-01

About 65% of the annual domestic waste water in Palestine is currently collected in cesspits, where inadequate disposal might cause cumulative public health risks and annual environmental degradation. This research presents the preliminary results for the start-up period of a pilot-scale UASB-septic tank system treating domestic septage of Birzet town. Under different operational conditions, the performance of the pretreatment system for the removal of organic matter and nutrients was evaluated. Initial results showed that organic pollutants removal was mainly due to biophysical processes including sedimentation and microbial degradation. During start-up phase, the system attained removal efficiency for COD total of about 80% compared to removal for COD col, and COD dis of 71% and 43% respectively. Similarly, the continuous operation mode demonstrated that the system was quite effective in removing organic pollutants. Operational experience from the initial results revealed that seeding the USAB reactor with activated sludge during the start up period was not practical. Finally, the advantage of USAB-septic tank application appeared to be achievable if adequate system operation and control over a long monitoring period were maintained. (author)

The Effect of Previous Co-Worker Experience on the Survival of Knowledge Intensive Start-Ups

DEFF Research Database (Denmark)

Timmermans, Bram

The aim of the paper is to investigate the effect of previous co-worker experience on the survival of knowledge intensive start-ups. For the empirical analysis I use the Danish Integrated Database of Labor Market Research (IDA). This longitudinal employer-employee database allows me to identify co-worker...... experience among all members of the firm. In addition, I will make a distinction between ordinary start-ups and entrepreneurial spin-offs. The results show that previous co-worker experience has a positive effect on new firm survival. This effect appears to be valid predominantly for ordinary start-ups than...

Experimental Labs for Start-Ups: The Role of the "Venture-Sitter"

Science.gov (United States)

Matricano, Diego; Pietrobon, Alberto

2010-01-01

Curley and Formica's (2008, 2010) studies of high-expectation entrepreneurship focus on the role of "experimental laboratories" in promoting the start-up and successful development of high-expectation firms. Although it is not difficult to understand the potential usefulness of these experimental labs--business simulators in which skilled partners…

Achieving and Sustaining New Knowledge Development in High-Expectation Start-Ups

Science.gov (United States)

Matricano, Diego

2010-01-01

In markets characterized by strong competition, new knowledge and new knowledge development are generally recognized as the key means for an enterprise to gain competitive advantage. This knowledge-based competitive advantage is critical for all commercial ventures, but is especially so for high-expectation start-ups (technology-based ventures…

Programme of CABRI start-up measurements with the Zircaloy loop

International Nuclear Information System (INIS)

Kussmaul, G.; Rongier, P.

1981-06-01

After installation and operational tests of the CABRI Zircaloy loop, a start-up test programme will be carried out to determine the new coupling value between the driver core and the test pin and the reactivity dependent driver core energy release for transients from different power levels and modified injection rates. The purpose of the tests and the test programme itself are described in the report

Results of CABRI start-up measurements with the Zircaloy loop

International Nuclear Information System (INIS)

Kussmaul, G.; Rongier, P.

1983-02-01

After the change of the test loop in the CABRI core a start-up programme has been performed to determine the gain of coupling and the He-3 pressure-dependent driver core energy release for transients from different initial power levels and modified injection rates. This report gives the results of thirty tests and the means to adjust the experimental conditions of future CABRI tests

Enhanced start-up of anaerobic facultatively autotrophic biocathodes in bioelectrochemical systems

KAUST Repository

Zaybak, Zehra

2013-12-01

Biocathodes in bioelectrochemical systems (BESs) can be used to convert CO2 into diverse organic compounds through a process called microbial electrosynthesis. Unfortunately, start-up of anaerobic biocathodes in BESs is a difficult and time consuming process. Here, a pre-enrichment method was developed to improve start-up of anaerobic facultatively autotrophic biocathodes capable of using cathodes as the electron donor (electrotrophs) and CO2 as the electron acceptor. Anaerobic enrichment of bacteria from freshwater bog sediment samples was first performed in batch cultures fed with glucose and then used to inoculate BES cathode chambers set at -0.4V (versus a standard hydrogen electrode; SHE). After two weeks of heterotrophic operation of BESs, CO2 was provided as the sole electron acceptor and carbon source. Consumption of electrons from cathodes increased gradually and was sustained for about two months in concert with a significant decrease in cathode chamber headspace CO2. The maximum current density consumed was -34±4mA/m2. Biosynthesis resulted in organic compounds that included butanol, ethanol, acetate, propionate, butyrate, and hydrogen gas. Bacterial community analyses based on 16S rRNA gene clone libraries revealed Trichococcus palustris DSM 9172 (99% sequence identity) as the prevailing species in biocathode communities, followed by Oscillibacter sp. and Clostridium sp. Isolates from autotrophic cultivation were most closely related to Clostridium propionicum (99% sequence identity; ZZ16), Clostridium celerecrescens (98-99%; ZZ22, ZZ23), Desulfotomaculum sp. (97%; ZZ21), and Tissierella sp. (98%; ZZ25). This pre-enrichment procedure enables simplified start-up of anaerobic biocathodes for applications such as electrofuel production by facultatively autotrophic electrotrophs. © 2013 Elsevier B.V.

Enhanced start-up of anaerobic facultatively autotrophic biocathodes in bioelectrochemical systems

KAUST Repository

Zaybak, Zehra; Pisciotta, John M.; Tokash, Justin C.; Logan, Bruce E.

2013-01-01

Biocathodes in bioelectrochemical systems (BESs) can be used to convert CO2 into diverse organic compounds through a process called microbial electrosynthesis. Unfortunately, start-up of anaerobic biocathodes in BESs is a difficult and time consuming process. Here, a pre-enrichment method was developed to improve start-up of anaerobic facultatively autotrophic biocathodes capable of using cathodes as the electron donor (electrotrophs) and CO2 as the electron acceptor. Anaerobic enrichment of bacteria from freshwater bog sediment samples was first performed in batch cultures fed with glucose and then used to inoculate BES cathode chambers set at -0.4V (versus a standard hydrogen electrode; SHE). After two weeks of heterotrophic operation of BESs, CO2 was provided as the sole electron acceptor and carbon source. Consumption of electrons from cathodes increased gradually and was sustained for about two months in concert with a significant decrease in cathode chamber headspace CO2. The maximum current density consumed was -34±4mA/m2. Biosynthesis resulted in organic compounds that included butanol, ethanol, acetate, propionate, butyrate, and hydrogen gas. Bacterial community analyses based on 16S rRNA gene clone libraries revealed Trichococcus palustris DSM 9172 (99% sequence identity) as the prevailing species in biocathode communities, followed by Oscillibacter sp. and Clostridium sp. Isolates from autotrophic cultivation were most closely related to Clostridium propionicum (99% sequence identity; ZZ16), Clostridium celerecrescens (98-99%; ZZ22, ZZ23), Desulfotomaculum sp. (97%; ZZ21), and Tissierella sp. (98%; ZZ25). This pre-enrichment procedure enables simplified start-up of anaerobic biocathodes for applications such as electrofuel production by facultatively autotrophic electrotrophs. © 2013 Elsevier B.V.

Building and managing strategic alliances in technology-driven start-ups: a critical review of literature

OpenAIRE

Comi, Alice; Eppler, Martin J.

2009-01-01

In this article, we critically review the current literature on alliance formation and management with a particular emphasis on small businesses, and on managerial implications for start-up enterprises. In the beginning of the article, we discuss the advantages and the challenges of inter-organizational collaboration, by taking the perspective of technology-driven start-ups operating in highly competitive environments. We then review the managerial advice suggested by the current liter...

Influence of start-ups with fuel-oil on the operation of electrostatic precipitators in pulverised coal boilers

Energy Technology Data Exchange (ETDEWEB)

Navarrete, B.; Vilches, L.F.; Canadas, L.; Salvador, L. [University of Seville, Seville (Spain)

2004-04-01

This article describes the results of a series of tests carried out in a pilot fly ash electrostatic precipitation facility operating with real gases from a 550 MWe pulverized coal-fired power station. The main goal of these tests was to determine the effects of boiler start-ups on the performance of the electrostatic preciptator. The tests were carried out during start-ups of the power station boiler. All tests were carried out with the same fuel. An evaluation was made of the effects of the use of fuel-oil as auxillary fuel in start-ups and shut-downs of the boiler, and different electrostatic precipitators operation procedures were tested during start-ups and shut-downs. The results of the experiments made it possible to assess the relative importance of different variables on the possible deterioration of the efficiency of the precipitators. Also evaluated were operational modes that have demonstrated an improvement in the performance of the precipitators after the transient stage of these operations. As a result of this study, a number of important operational recommendations are made on boiler start-up and shut-down procedures.

Pomen ustrezne podjetniške ekipe in njene motivacije za uspeh start-up podjetja

OpenAIRE

Kumer, Špela

2015-01-01

V diplomskem projektu smo podrobneje preučevali vpliv podjetniške ekipe in njene motivacije na uspeh start-up podjetja. V teoretičnem delu smo najprej razložili osnovne pojme, povezane s start-up podjetji ter opisali načine dela, ki se v takih podjetjih uporabljajo. Na kratko smo opisali tudi podjetniški proces, katerega sestavni del je med drugim podjetniška ekipa. Podjetniško ekipo smo raziskovali podrobneje – navedli smo njeno optimalno sestavo, potrebne lastnosti ekipe in izkušnje...

EC assisted start-up experiments reproduction in FTU and AUG for simulations of the ITER case

Energy Technology Data Exchange (ETDEWEB)

Granucci, G.; Ricci, D.; Farina, D.; Figini, L. [Associazione EURATOM-ENEA sulla Fusione, IFP-CNR, Via R. Cozzi 53, 20125 Milano (Italy); Cavinato, M. [F4E C/Josep Pla2, Torres Diagonal Litoral - Building 83 08019 Barcelona (Spain); Mattei, M. [CREATE via Claudio 21, 80125 Napoli (Italy); Stober, J. [Max-Planck-Institut für Plasmaphysik, EURATOM Association, Boltzmannstr. 2, 85748 Garching bei München (Germany); Tudisco, O. [Associazione EURATOM-ENEA sulla Fusione, C.R. Frascati, Via E. Fermi 45, 00044 Frascati (Roma) (Italy)

2014-02-12

The breakdown and plasma start-up in ITER are well known issues studied in the last few years in many tokamaks with the aid of calculation based on simplified modeling. The thickness of ITER metallic wall and the voltage limits of the Central Solenoid Power Supply strongly limit the maximum toroidal electric field achievable (0.3 V/m), well below the level used in the present generation of tokamaks. In order to have a safe and robust breakdown, the use of Electron Cyclotron Power to assist plasma formation and current rump up has been foreseen. This has raised attention on plasma formation phase in presence of EC wave, especially in order to predict the required power for a robust breakdown in ITER. Few detailed theory studies have been performed up to nowadays, due to the complexity of the problems. A simplified approach, extended from that proposed in ref[1] has been developed including a impurity multispecies distribution and an EC wave propagation and absorption based on GRAY code. This integrated model (BK0D) has been benchmarked on ohmic and EC assisted experiments on FTU and AUG, finding the key aspects for a good reproduction of data. On the basis of this, the simulation has been devoted to understand the best configuration for ITER case. The dependency of impurity distribution content and neutral gas pressure limits has been considered. As results of the analysis a reasonable amount of power (1 - 2 MW) seems to be enough to extend in a significant way the breakdown and current start up capability of ITER. The work reports the FTU data reproduction and the ITER case simulations.

Does Easy Start-Up Formation Hamper Incumbents R&D Investment?

OpenAIRE

Colombo, Luca; Dawid, Herbert; Piva, Mariacristina; Vivarelli, Marco

2013-01-01

This paper investigates, both theoretically and empirically, the implications that complementary assets needed for the formation of start-ups - proxied by the ease of access to financial resources - have on the innovative efforts of incumbent firms. In particular, we develop a theoretical model, highlighting a strategic in- centive effect by which the innovative efforts of incumbent firms are decreasing in the availability of the complementary assets needed for the creation of ...

Construction, start-up and operation of Dukovany nuclear power plant

International Nuclear Information System (INIS)

Hornicek, Z.

1989-01-01

The Labor Safety Inspectorate have been supervising the construction of the Dukovany nuclear power plant since the construction start in 1977. It was found that in concreting the reactor building walls with concrete mixes, the regulations were not observed on the highest level for the concrete mix drop, and on the gap processing and concrete treatment when concreting was interrupted. Thus, concreting was halted until the conditions for concreting were met. Attention was focused on the protection of the hermetic casing from damage, which had very often happened. A number of shortcomings were detected in storing technology parts. The cleanliness was inspected of the facilities being assembled. The inspections also revealed shortcomings in sealed space tightness. The inspections of assembly and testing of facilities showed failures of the facilities themselves (control valves, electric motors, filter and pump sealing) and of the assembly process. Faults were also detected in electrical equipment. Only a very small part of the installation showed lifetime as specified by Decree 105/1982 Coll. laws on safety assurance in the nuclear power industry. Missing data in documentation led to delays in the start-up stages. The State Surveillance Body also inspected the results of equipment testing. Prior to physical start-up, all production facilities and buildings were inspected, labor safety was inspected for all personnel in communicating corridors, staircases, manholes and onservice and handling posts. Shortcomings were removed. The organization of assembly work was a considerable problem if staff from more organizations had to work together in the same workplace. A list of tasks is presented of State Surveillance Body in operation, maintenance, outages, repairs, and troubleshooting in a nuclear power plant. (J.B.)

Training Head Start Teachers to Conduct Trial-Based Functional Analysis of Challenging Behavior

Science.gov (United States)

Rispoli, Mandy; Burke, Mack D.; Hatton, Heather; Ninci, Jennifer; Zaini, Samar; Sanchez, Lisa

2015-01-01

Trial-based functional analysis (TBFA) is a procedure for experimentally identifying the function of challenging behavior within applied settings. The purpose of this study was to examine the effects of a TBFA teacher-training package in the context of two Head Start centers implementing programwide positive behavior support (PWPBS). Four Head…

Start-Up Entrepreneurs and University Students in a Co-Learning Mode: Learning Effects of a Collaborative Entrepreneurial Coaching Programme

Science.gov (United States)

Saukkonen, Juha; Nukari, Jussi; Ballard, Sharon; Levie, Jonathan

2016-01-01

Start-up companies have been recognized as key drivers of wealth and job creation. Many students now in universities will therefore find their future employment in start-up companies, or will found them. Success in the start-up environment requires a specific set of skills. There is a growing supply of university education for new venture creation…

Start-up and operation of Laguna Verde-2

International Nuclear Information System (INIS)

Torres Ramirez, J.F.

1996-01-01

The 665 MWe Laguna Verde-2 nuclear generating unit was accepted into commercial operation on April 10, 1995. The boiling water reactor plant by General Electric (GE) was first synchronized with the grid on November 11, 1994. Laguna Verde-2 is identical with Laguna Verde-1 on the same site. That unit had gone critical for the first time in November 1988 and had first been synchronized with the power grid on April 13, 1989. Commercial operation of Laguna Verde-1 had been started on July 29, 1990. Mexico's only nuclear power plant had been built 70 km north of Veracruz on the east coast and had been scheduled to start operation in 1976. As the Mexican nuclear power program was reduced, the scheduled commissioning dates suffered more and more delays. In the full of 1987, the investigation by the Operational Safety Review Team (Osart) of the International Atomic Energy Agency (IAEA) had indicated that the safety requirements of installations and equpiment were met, and that the whole plant was well prepared for fueling. In mid-1988, the Mexican Government had issued the permit to fuel the Laguna Verde-1 reactor. The contract to build the two units had been awarded in 1972/73. No other nuclear power plants are currently under construction or in the planning phase in Mexico. (orig.) [de

Training waste generators: The first responder in proper waste management

International Nuclear Information System (INIS)

Jones, E.

1989-01-01

Dealing with waste effectively requires a ''cradle to grave'' approach to waste management. The first step in that chain of custody is the waste generator. The waste generator plays the key role in the correct identification, packaging, and disposal of waste. The Technical Resources and Training Section at the Oak Ridge National Laboratory (ORNL) has developed several short training programs for waste generators. This training presents a consistent approach to proper handling of waste within the ORNL waste management system. This training has been developed for generators of solid low-level radioactive waste, hazardous and mixed waste, and transuranic waste. In addition to the above, a Waste Minimization training program has been developed for use by all organizations at ORNL who generate any type of hazardous waste. These training programs represent a combined effort of the training staff and the technical staff to assure that all ORNL staff accept their responsibility for handling all types of radioactive and hazardous wastes correctly from its generation to its disposal. 4 refs

Optimization of Passive Voltage Multipliers for Fast Start-up and Multi-voltage Power Supplies in Electromagnetic Energy Harvesting Systems

Science.gov (United States)

Yang, G.; Stark, B. H.; Burrow, S. G.; Hollis, S. J.

2014-11-01

This paper demonstrates the use of passive voltage multipliers for rapid start-up of sub-milliwatt electromagnetic energy harvesting systems. The work describes circuit optimization to make as short as possible the transition from completely depleted energy storage to the first powering-up of an actively controlled switched-mode converter. The dependency of the start-up time on component parameters and topologies is derived by simulation and experimentation. The resulting optimized multiplier design reduces the start-up time from several minutes to 1 second. An additional improvement uses the inherent cascade structure of the voltage multiplier to power sub-systems at different voltages. This multi-rail start-up is shown to reduce the circuit losses of the active converter by 72% with respect to the optimized single-rail system. The experimental results provide insight into the multiplier's transient behaviour, including circuit interactions, in a complete harvesting system, and offer important information to optimize voltage multipliers for rapid start-up.

Optimization of Passive Voltage Multipliers for Fast Start-up and Multi-voltage Power Supplies in Electromagnetic Energy Harvesting Systems

International Nuclear Information System (INIS)

Yang, G; Stark, B H; Burrow, S G; Hollis, S J

2014-01-01

This paper demonstrates the use of passive voltage multipliers for rapid start-up of sub-milliwatt electromagnetic energy harvesting systems. The work describes circuit optimization to make as short as possible the transition from completely depleted energy storage to the first powering-up of an actively controlled switched-mode converter. The dependency of the start-up time on component parameters and topologies is derived by simulation and experimentation. The resulting optimized multiplier design reduces the start-up time from several minutes to 1 second. An additional improvement uses the inherent cascade structure of the voltage multiplier to power sub-systems at different voltages. This multi-rail start-up is shown to reduce the circuit losses of the active converter by 72% with respect to the optimized single-rail system. The experimental results provide insight into the multiplier's transient behaviour, including circuit interactions, in a complete harvesting system, and offer important information to optimize voltage multipliers for rapid start-up

Experimental study on the start-up with dry gases from normal cell temperatures in self-humidified proton exchange membrane fuel cells

International Nuclear Information System (INIS)

Kong, Im Mo; Jung, Aeri; Kim, Beom Jun; Baik, Kyung Don; Kim, Min Soo

2015-01-01

In this study, the start-up characteristics of PEMFCs (proton exchange membrane fuel cells) was investigated with dry gases from normal cell temperatures above 0 °C. Firstly, the effects of flow arrangements (co-flow and counter-flow) were evaluated at a starting cell temperature of 25 °C. Then, the start-up was successful in both arrangements, but it showed better performance with counter-flow. In addition, the hydrogen concentration was measured and it showed that hydrogen crossover contributes to the membrane hydration and the first phase of dry start-up. However, although the cell temperature rose above 45 °C after start-up form 25 °C with counter-flow arrangement, the restart-up after shut-down failed at a starting cell temperature of 45 °C regardless of flow arrangements. Considering the needs of restart-up, the available starting cell temperature should be improved. For this, after first sub-step of start-up process, relatively low flow rates were maintained to retain produced water without purge so that the membrane can be hydrated sufficiently. With this modified process, denominated as WSP (water storage process) in this study, the dry start-up became successful at a starting cell temperature of 45 °C and the cell performance was remarkably improved especially with counter-flow arrangement. - Highlights: • Start-up with dry gases from normal cell temperatures was investigated. • Counter-flow arrangement showed better performance over co-flow arrangement. • Water is produced by hydrogen crossover and its direct reaction with oxygen at cathode side. • It prevents the membrane dehydration and helps the start-up during the first phase of the process. • Available starting cell temperature and cell performance could be improved with WSP.

Finding competitive intelligence on Internet start-up companies: a study of secondary resource use and information-seeking processes

Directory of Open Access Journals (Sweden)

2001-01-01

Full Text Available The paper reports findings from a study of CI activities involving Internet start-up companies in the telecommunications industry. The CI gathering was conducted by graduate students in library and information science in the context of a class project for a real business client, itself a small Internet start-up company. The primary objective of the study was to provide empirical insights into the applicability of specific types of secondary information resources to finding competitive intelligence information on small Internet start-up companies. An additional objective was to identify the characteristics of research strategies applied in the collection of CI on Internet start-ups from the perspective of current conceptual frameworks of information-seeking behaviour presented in the library and information science literature. This study revealed some interesting findings regarding the types of secondary information resources that can be used to find competitive intelligence on small, Internet start-up companies. The study also provided insight into the characteristics of the overall information-seeking strategies that are applied in this type of competitive intelligence research.

Improving ADM1 model to simulate anaerobic digestion start-up with inhibition phase based on cattle slurry

International Nuclear Information System (INIS)

Normak, A.; Suurpere, J.; Suitso, I.; Jõgi, E.; Kokin, E.; Pitk, P.

2015-01-01

The Anaerobic Digestion Model No.1 (ADM1) was improved to simulate an anaerobic digestion start-up phase. To improve the ADM1, a combined hydrolysis equation was used based on the Contois model of bacterial growth and the function of hydrolysis inhibition by VFA. The start-up with fresh cattle slurry was carried out in a pilot-scale reactor to calibrate the chosen parameters of the ADM1. The important aspects of model calibration were hydrolysis rate, the number of anaerobic microbes in cattle slurry, and the growth rate of bacteria. Good simulation results were achieved after calibration for the independent start-up test with pre-conditioned cattle slurry. - Highlights: • Improved ADM1 can be used for simulation of reactor start-up with inhibition phase. • The hydrolysis rate had a decreased value in case of high VFA concentration or low number of hydrolytic bacteria. • Hydrolysis inhibitory threshold value of 9.85 g L −1 was obtained for VFA. • Start-up with pre-conditioned cattle slurry had a relatively short inhibition phase

The process of the start-up of a PWR nuclear power plant in the USA

International Nuclear Information System (INIS)

Rana, B.S.

1977-01-01

The procedure is described of putting into full operation the William B. Mc Guire nuclear power plant with two PWR reactors with an output of 2x3,411 MWt (2x1,220 MWe) supplied to the Duke Power Co. lock, stock and barrel. The basic specifications are shown of units I and II and the organization of start-up activities is described. The time schedule of preoperational and start-up tests is shown and testing is reviewed preceding the first fuel charge. Also described are tests related to the first start-up of a unit comprising the period of the first fuel charge, the initial critical state, low-power tests and tests with power gradually increased. In tests of the individual systems and components of the unit, operating regulations are verified and, if required, renewed, or new regulations are introduced. (B.S.)

Experimental investigation on flow behavior during start-up of a heating reactor

International Nuclear Information System (INIS)

Jiang Shengyao; Wu Xinxin; Zhang Youjie

1997-09-01

An experimental simulation study on the transition from pressurized to boiling operation of a low-temperature, natural circulation nuclear heating reactor (5 MW) developed by INET of Tsinghua University is presented. The experiment was performed on the test loop (HRTL-5), which simulates the geometry and system design of the 5 MW reactor. The manifestation of different kinds of two-phase flow instabilities, namely geyser instability, flashing instability and low-steam quality density wave instability on the transition from pressurized to boiling operation is described. The mechanism of flashing instability, which has never been studied well on this field, is especially interpreted. It is suggested that the start-up process, from initial condition to boiling operation condition, should consist of three steps: (1) increasing of initial pressure by means of a noncondensable gas (N 2 ), which is a very effective method to eliminate geyser instability and flashing instability at lower pressure. (2)start-up of the reactor at this pressurized condition with a constant heat flux under the limited value of q = 0.15 MW·m -2 , which controls the exit temperature of the heated section below the one of net vapor generation, the low steam quality density wave oscillation can be avoided. (3) transition to a lower pressure, boiling operation. The method of transition with low-heat flux and low-inlet subcooling is proposed: at pressurized operation condition, by reducing the heat flux to its lowest level, releasing the noncondensable gas and increasing the heat flux gradually (dq/dt -2 ·min -1 ), during which the low-steam quality density wave oscillation can be prevented from occurring, then the boiling operation condition can be achieved through adjusting the heat flux and inlet subcooling to their designed value. A stable transition from pressurized to boiling operation of the 5 MW reactor is achieved by careful selection of the thermohydraulic parameters. (7 refs., 7 figs., 1

On Stability of Natural-circulation-cooled Boiling Water Reactors during Start-up (Experimental Results)

International Nuclear Information System (INIS)

Manera, A.; Van der Hagen, T.H.J.J.

2002-01-01

The characteristics of flashing-induced instabilities, which are of importance during the start-up phase of natural-circulation Boiling Water Reactors (BWRs), are studied. Experiments at typical start-up conditions (low power and low pressure) are carried out on a steam/water natural circulation loop. The mechanism of flashing-induced instability is analyzed in detail and it is found that non-equilibrium between phases and enthalpy transport plays an important role in the instability process. Pressure and steam volume in the steam dome are found to have a stabilizing effect. The main characteristics of the instabilities have been analyzed. (authors)

Upcoming training sessions (up to end October) - Places available

CERN Multimedia

2016-01-01

Please find below a list of training sessions scheduled to take place up to the end of October with places available.   Safety and Language courses are not included here, you will find an up-to-date list in the Training Catalogue. If you need a course which is not featured  in the catalogue, please contact one of the following: your supervisor, your Departmental Training Officer or the relevant learning specialist.  

Start-Up of a Pulsed Beam Free Electron Laser (FEL) Oscillator

Science.gov (United States)

1983-04-01

By slightly increasing the frequency of the R.F. accelerating field, Wacc during the start-up period, i.e., decreasing the beam pulse separation, the...levels. The required fractional increase in Wacc is 16L 1- 6L2 1/Lbow 10 - 6 for the parameters of ref. (3,4). The same 6 effect may also be realized

The Predictive Ability of Business Panel Assessments and Start-up Firm Survival

NARCIS (Netherlands)

Englis, Paula Danskin; Englis, Basil; Groen, Arend J.; Heuven, Joris M.J.; Zalewska-Kurek, Katarzyna

University-based incubators guide entrepreneurs through the start-up and growth process. They also create and provide many opportunities for new firms to develop their network with the business environment, get coaching assistance, and perhaps most importantly develop their business models and

Drivability Improvement Control for Vehicle Start-Up Applied to an Automated Manual Transmission

Directory of Open Access Journals (Sweden)

Danna Jiang

2017-01-01

Full Text Available Drivability is the key factor for the automated manual transmission. It includes fast response to the driver’s demand and the driving comfort. This paper deals with a control methodology applied to an automated manual transmission vehicle for drivability enhancement during vehicle start-up phase. Based on a piecewise model of powertrain, a multiple-model predictive controller (mMPC is designed with the engine speed, clutch disc speed, and wheel speed as the measurable input variables and the engine torque reference and clutch friction torque reference as the controller’s output variables. The model not only includes the clutch dynamic, the flexible shaft dynamic, but also includes the actuators’ delay character. Considering the driver’s intention, a slipping speed trajectory is generated based on the acceleration pedal dynamically. The designed control strategy is verified on a complete powertrain and longitudinal vehicle dynamic model with different driver’s torque demands.

Agile methodology selection criteria: IT start-up case study

Science.gov (United States)

Micic, Lj

2017-05-01

Project management in modern IT companies is often based on agile methodologies which have several advantages compared to traditional methodologies such is waterfall. Having in mind that clients sometimes change project during development it is crucial for an IT company to choose carefully which methodology is going to implement and is it going to be mostly based on one or is it going got be combination of several. There are several modern and often used methodologies but among those Scrum, Kanban and XP programming are usually the most common. Sometimes companies use mostly tools and procedures from one but quite often they use some of the combination of those methodologies. Having in mind that those methodologies are just a framework they allow companies to adapt it for their specific projects as well as for other limitations. These methodologies are in limited usage Bosnia but more and more IT companies are starting to use agile methodologies because it is practice and common not just for their clients abroad but also starting to be the only option in order to deliver quality product on time. However it is always challenging which methodology or combination of several companies should implement and how to connect it to its own project, organizational framework and HR management. This paper presents one case study based on local IT start up and delivers solution based on theoretical framework and practical limitations that case company has.

Preparation of mandatory documentation before the start up of the RA-0 'zero power' nuclear reactor at Cordoba National University

International Nuclear Information System (INIS)

Martin, H.R.; Keil, W.M.; Pezzi, N.

1991-01-01

Before the start up of the RA-0 'zero power' nuclear reactor installed at Cordoba National University, it was necessary to send to the Regulatory Authority the mandatory documentation which is required in the licensing process. With the previous papers existing for the operation in the first years of the '70, a work program for the future operational training personnel was elaborated. Based on the Authority's applicable rules and the recommendations and with particular criteria originated in the working university conditions, the SAFETY report of RA-0 nuclear reactor was prepared. This paper describes the principal contents, items and documents involved in the safety report. (Author) [es

Development of data processing system for the start-up test of FUGEN

International Nuclear Information System (INIS)

Nakajima, Ichiro; Kato, Hidemasa

1981-01-01

The data processing in the start-up test of conventional reactors has been carried out by recording data with transient phenomena recorders (e.g. electromagnetic oscillographs) or analog data recorders. On the other hand, the rapid works for detailed comparison and investigation between the test data and the analyzed results have been indispensable because ''Fugen'' is a new type of reactor, for which the results in conventional reactors did not necessarily serve as reference. Therefore, in the start-up test of the ''Fugen'' plant, the test data processing and the forecast analysis were performed by installing on the site a mini-computer capable of independently processing the test data and a terminal equipment connected to a large computer with a special communication line. As soon as the testing was completed, the comparison of the test data with the forecast analysis was presented on a graphic display (CRT), and the analysis was modified until significant differences did not appear between the test data and the analyzed data. In this paper, the system hardware and software are described, and two functions of forecast analysis and test data processing are explained. The time required for printing-out or graphic display from inputting 600 kB analysis code data using the terminal equipment was 10 to 30 minutes, and the evaluation and investigation for the test results were able to be immediately achieved by the data processing using the mini-computer. This is one of the factors to carry out the start-up test satisfactorily together with the forecast analysis works. (Wakatsuki, Y.)

Start-up of Rapsodie; Le demarrage de Rapsodie

Energy Technology Data Exchange (ETDEWEB)

Pontier, R [Commissariat a l' Energie Atomique, 13 - Cadarache (France). Centre d' Etudes Nucleaires

1967-07-01

After giving a general description of Rapsodie this report presents the conditions in which the start-up occurred and in which the tests were carried out. A chronological account is given of the operations and of the main events which occurred. The modifications made to the reactor during this period are described and a synthesis of the results obtained is presented. (author) [French] Apres avoir donne de RAPSODIE une description tres generale, ce rapport expose le cadre dans lequel ont ete effectues le demarrage et les essais de l'installation, fait un historique du deroulement des operations et des principaux evenements qui sont intervenus, indique les modifications apportees au reacteur au cours de cette periode et presente une synthese des resultats obtenus. (auteur)

TFTR Mirnov coil analysis at plasma start-up

International Nuclear Information System (INIS)

Harley, T.R.; Buchenauer, D.A.; Coonrod, J.; McGuire, K.M.

1986-01-01

The methods for finding poloidal and toroidal numbers of MHD oscillations from Mirnov coils are reviewed and modified. Examples of various MHD phenomena occurring during start-up on TFTR are illustrated. It is found that the MHD mode structure best fits a model with the toroidal correction included. A new algorithm which finds m,n numbers can accommodate toroidal effects which are manifested in the phase data. The algorithm can find m,n numbers with a given toroidal correction parameter lambda', (lambda' = 0 → cylindrical). This algorithm is also used to find the optimal value of lambda' automatically, eliminating the need for ''guesswork.'' The algorithm finds the best parameters to the fit much faster than more conventional computational techniques. 9 refs., 21 figs., 2 tabs

The Prevessin Control Room during LEP's start up in 1989.

CERN Multimedia

1989-01-01

The Prévessin Control Room saw its first momentous event when the 400 GeV beam for the SPS was commissioned in the presence of Project Leader John Adams. It was also here that the first proton-antiproton collisions were observed, in 1981. Eight years later, in 1989, operators and directors alike jumped for joy at the announcement of the first electron-positron collisions at the start up of LEP, the biggest accelerator in the world.

CROWDFUNDING AS A WAY OF FINANCING START-UPS IN POLAND

OpenAIRE

Niznik-Klocek, Monika

2012-01-01

There is a capital gap existing in Poland which particularly affects the limited opportunities for establishment and development of new ventures. The relatively fresh concept of crowdfunding could be a solution to this problem. The purpose of the thesis was to contribute to the scarce literature on crowdfunding in Poland. The main objective of the research was the creation of some suggestions for Polish start-ups on how to use crowdfunding in the most effective way. Firstly, the literatur...

Guidelines for Finnish start-ups on how to utilize crowdfunding

OpenAIRE

Rouhiainen, Anneli

2016-01-01

This thesis aims to show how a Finnish start-up could benefit from crowdfunding.Other funding methods are explained shortly in the beginning and the rest of the thesis focusing on crowdfunding. The current Finnish legislation does not yet include anything aimed directly at crowdfunding, but a proposal is to be presented in spring 2016 to the ministry of Finance. There are some crowdfunding websites operating in Finland, including Mesenaatti.me and Invesdor.com. Other more popular we...

Reorganization of the radiologic protection of the nuclear reactor RA-0 for the next starting up at Cordoba National University

International Nuclear Information System (INIS)

Martin, H.R.; Chautemps, N.A.; Rumis, D.A.

1991-01-01

Due to the fulfillment to the tasks for the new starting up of the RA-0 Nuclear Reactor situated at the National University of Cordoba, it was necessary to plan and organize the service of Radiologic Protection to meet the future requirements in normal operation. The special characteristics that an installation of this type has in the university field, required special attention for making the university staff become aware in the working proceedings to follow up in normal conditions, such as the case of emergency that would originate in the installation. The training of the teaching and non teaching staff of the National University of Cordoba, the adjusting of the installations, the obtention of dosimetry and measurement equipment and the implementation of a monitor system of the staff were the main tasks confronted for the reorganization of the sector. (Author) [es

Analysing impacts of the economic crisis on the pre–start ups process of business students in Germany.

Directory of Open Access Journals (Sweden)

Walter Ruda

2011-12-01

Full Text Available The article is part of the empirical research project “Starting up Businesses and Entrepreneurship by Students” (GESt–study and analyzes potential impacts of the economic crisis on the pre–start–up process of business students surveyed before and during the downturn at four German universities (of applied sciences, what supports the advancement of entrepreneurship education and support within two different macroeconomic contexts. Though in Germany recessions typically animate more persons to self–employment, these business start–ups are mostly based on necessity–driven entrepreneurship. But particularly opportunity entrepreneurship has positive effects on economic growth and employment. Whereas no significant differences can be detected regarding their start–up propensities, the economic crisis indeed has heightened the intended start–up time as well as the necessity–driven start–up motivation of the surveyed business students, but not their start–up motivation from economic self–realization. Therefore, self–employment as vocational alternative has to be highlighted stronger and entrepreneurial basic knowledge has to be taught adequately to the students so that they are able to mature as potential entrepreneurs at their universities – the location where specialized knowledge about their subsequent professionalism is imparted – what facilitates them to generate future innovations accompanied by enduring and high–skilled employment.

Control of a post-combustion CO₂ capture plantduring process start-up and load variations

DEFF Research Database (Denmark)

Gaspar, Jozsef; Jørgensen, John Bagterp; Fosbøl, Philip Loldrup

2015-01-01

for various operational procedures, e.g. start-up, load changes, noise on the flue gas flow rate and composition. Note that the carbon capture plant is based on the solvent storage configuration. To the authors knowledge, this is the first paper addressing the issue of start-up operation and control of carbon...

Start-up´ide kasvataja: kapitalisüst teeb laisaks / Ilmar Kahro

Index Scriptorium Estoniae

Kahro, Ilmar

2011-01-01

Soomlase Kristo Ovaska hinnangul on nii Soomes kui ka mujal Euroopas suund, et avalikku raha antakse start-up´idele liiga varajases staadiumis liiga lihtsalt, see on ettevõtjatele pigem karuteene. Uute innovaatilisete ettevõtete loomises jääb Euroopa Aasiale ja Põhja-Ameerikale alla

A Studio Based Approach to Enhancing Decision Making in Sme Start-Up

NARCIS (Netherlands)

Sol, H G; Ejiri, A.H.; Nabukenya, J.

2011-01-01

The start-up phase plays an important role in the success and survival of many enterprises, which greatly depends on adequate and timely services for decision making. However, deciding to startup a mining Small and Medium Enterprise (SME) is a challenging task for many entrepreneurs in Uganda.

Unpainting the black box : exploring mechanisms and practices of start-up incubators

NARCIS (Netherlands)

van Weele, M.A.

2016-01-01

Although incubators have become one of the most prominent instruments to stimulate the emergence and growth of start-ups, questions are being raised about their effectiveness. One major obstacle to evaluate the effectiveness of incubators is that the incubator remains a ‘black box’: the extant

Frequency Control Strategy for Black Starts via PMSG-Based Wind Power Generation

Directory of Open Access Journals (Sweden)

Yi Tang

2017-03-01

Full Text Available The use of wind power generation (WPG as a source for black starts will significantly enhance the resiliency of power systems and shorten their recovery time from blackouts. Given that frequency stability is the most serious issue during the initial recovery period, virtual inertia control can enable wind turbines to provide frequency support to an external system. In this study, a general procedure of WPG participating in black starts is presented, and the key issues are discussed. The adaptability of existing virtual inertia control strategies is analyzed, and improvement work is performed. A new coordinated frequency control strategy is proposed based on the presented improvement work. A local power network with a permanent-magnet synchronous generator (PMSG-based wind farm is modeled and used to verify the effectiveness of the strategy.

Eesti firma pääses Euroopas olulisse start-up-programmi / Ilmar Kahro

Index Scriptorium Estoniae

Kahro, Ilmar

2011-01-01

Euroopa start-up-firmade programm Seedcamp kutsus Eesti firma Pipedrive osalema üritusel Mini Seedcamp. Üritusel osalejad valiti rekordarvu kandideerijate hulgast, võitjad võivad saada kutse Seedcampi nädalale. Pipedrive'ist

Team training using full-scale reactor coolant pump seal mock-ups

International Nuclear Information System (INIS)

McDonald, T.J.; Hamill, R.W.

1987-01-01

The use of full-scale reactor coolant pump (RCP) seal mock-ups has greatly enhanced Northeast Utilities' ability to effectively utilize the team training approach to technical training. With the advent of the Institute of Nuclear Power Operations accreditation come a new emphasis and standards for the integrated training of plant engineering personnel, maintenance mechanics, quality control personnel, and health physics personnel. The results of purchasing full-scale RCP mock-ups to pilot the concept of team training have far exceeded expectations and cost-limiting factors. The initial training program analysis identified RCP seal maintenance as a task that required training for maintenance department personnel. Due to radiation exposure considerations and the unavailability of actual plant equipment for training purposes, the decision was made to procure a mock-up of an RCP seal assembly and housing. This mock-up was designed to facilitate seal cartridge removal, disassembly, assembly, and installation, duplicating all internal components of the seal cartridge and housing area in exact detail

Academic Training: Monte Carlo generators for the LHC

CERN Multimedia

Françoise Benz

2005-01-01

2004-2005 ACADEMIC TRAINING PROGRAMME LECTURE SERIES 4, 5, 6, 7 April from 11.00 to 12.00 hrs - Main Auditorium, bldg. 500 Monte Carlo generators for the LHC T. SJOSTRAND / CERN-PH, Lund Univ. SE Event generators today are indispensable as tools for the modelling of complex physics processes, that jointly lead to the production of hundreds of particles per event at LHC energies. Generators are used to set detector requirements, to formulate analysis strategies, or to calculate acceptance corrections. These lectures describe the physics that goes into the construction of an event generator, such as hard processes, initial- and final-state radiation, multiple interactions and beam remnants, hadronization and decays, and how these pieces come together. The current main generators are introduced, and are used to illustrate uncertainties in the physics modelling. Some trends for the future are outlined. ENSEIGNEMENT ACADEMIQUE ACADEMIC TRAINING Françoise Benz 73127 academic.training@cern.ch

AUDIT OF INNOVATIVE IDEAS AS THE PREVIOUS STAGE OF THE BUSINESS-PLAN OF START-UP PROJECTS

OpenAIRE

O. Zhylinska; M. Chuiko

2014-01-01

The phenomenon of feasibility reasoning of venture capital investment for the implementation of innovative ideas is revealed. The main elements of the methodology for feasibility of start-up projects, based on the concept of combination of life cycle of the market, product innovation and startup companies, are characterized. The comparative analysis of methods feasibility study and business plan start-up project is made, the importance of innovative ideas audit in future economic information ...

Design of data sampler in intelligent physical start-up system for nuclear reactor

International Nuclear Information System (INIS)

Wang Yinli; Ling Qiu

2007-01-01

It introduces the design of data sampler in intelligent physical start-up system for nuclear reactor. The hardware frame taking STμPSD3234A as the core and the firmware design based on USB interface are discussed. (authors)

Impact of start-up and shut-down losses on the economic benefit of an integrated hybrid solar cavity receiver and combustor

International Nuclear Information System (INIS)

Lim, Jin Han; Hu, Eric; Nathan, Graham J.

2016-01-01

Highlights: • We present the benefits of integrating a solar cavity receiver and a combustor. • The hybrid solar receiver combustor is compared with its equivalent hybrid. • The start-up losses of the back-up boiler are calculated for a variable resource. • Levelized cost of electricity is reduced by up to 17%. • Fuel consumption is reduced by up to 31%. - Abstract: The impact of avoiding the start-up and shut-down losses of a solar thermal power plant by directly integrating the back-up boiler into a tubular solar-only cavity receiver is studied using a multiple time-step, piecewise-continuous model. A steady-state analytical model of the mass and energy flows through both this device and a solar-only cavity receiver reported previously are incorporated within a model of the solar power generating plant with storage. The performance of the Hybrid Solar Receiver Combustor (HSRC) is compared with an equivalent reference conventional hybrid solar thermal system employing a solar-only cavity receiver and a back-up boiler. The model accounts for start-up and shut-down losses of the boiler, threshold losses of the solar-only cavity receiver and the amount of trace heating required to avoid cooling of the heat transfer fluid. The model is implemented for a 12 month/five year time-series of historical Direct Normal Irradiation (DNI) at 1 h time-steps to account for the variability in the solar resource at four sites spanning Australia and the USA. A method to optimize the size of the heliostat field is also reported, based on the dumped fraction of solar power from the heliostat field. The Levelized Cost of Electricity (LCOE) for the HSRC configuration was estimated to be reduced by up to 17% relative to the equivalent conventional hybrid solar thermal system depending on the cost of the fuel, the storage capacity and the solar resource, while the fuel consumption was estimated to be reduced by some 12–31%.

Steam temperature variation behind a turbine steam separator-superheater during NPP start-up

International Nuclear Information System (INIS)

Lejzerovich, A.Sh.; Melamed, A.D.

1979-01-01

To determine necessary parameters of the steam temperature automatic regulator behind the steam separator-rheater supe (SSS) of an NPP turbine the static and dynamic characteristics of the temperature change behind the SSS were studied experimentally. The measurements were carried out at the K-220-44 turbine of the Kolskaja NPP in the case of both varying turbine loads and the flow rate of the heating vapor. Disturbances caused by the opening of the regulating valve at the inlet of the heating vapor are investigated as well. It is found that due to a relatively high inertiality of the SSS a rather simple structure of the start-up steam temperature regulators behind the SSS in composition with automatated driving systems of the turbine start-up without regard for the change of the dynamic characteristics can be used

Evaluation of Start Transient Oscillations with the J-2X Engine Gas Generator Assembly

Science.gov (United States)

Hulka, J. R.; Morgan, C. J.; Casiano, M. J.

2015-01-01

During development of the gas generator for the liquid oxygen/liquid hydrogen propellant J-2X rocket engine, distinctive and oftentimes high-amplitude pressure oscillations and hardware vibrations occurred during the start transient of nearly every workhorse gas generator assembly test, as well as during many tests of engine system hardware. These oscillations appeared whether the steady-state conditions exhibited stable behavior or not. They occurred similarly with three different injector types, and with every combustion chamber configuration tested, including chamber lengths ranging over a 5:1 range, several different nozzle types, and with or without a side branch line simulating a turbine spin start gas supply line. Generally, two sets of oscillations occurred, one earlier in the start transient and at higher frequencies, and the other almost immediately following and at lower frequencies. Multiple dynamic pressure measurements in the workhorse combustion chambers indicated that the oscillations were associated with longitudinal acoustic modes of the combustion chambers, with the earlier and higher frequency oscillation usually related to the second longitudinal acoustic mode and the later and lower frequency oscillation usually related to the first longitudinal acoustic mode. Given that several early development gas generator assemblies exhibited unstable behavior at frequencies near the first longitudinal acoustic modes of longer combustion chambers, the start transient oscillations are presumed to provide additional insight into the nature of the combustion instability mechanisms. Aspects of the steadystate oscillations and combustion instabilities from development and engine system test programs have been reported extensively in the three previous JANNAF Liquid Propulsion Subcommittee meetings (see references below). This paper describes the hardware configurations, start transient sequence operations, and transient and dynamic test data during the start

The Experiment Study of Anaerobic Ammonia Oxidation Start-up by Using the Upflow Double Layer Anaerobic Filter

Directory of Open Access Journals (Sweden)

YAO Li

2018-02-01

Full Text Available Anammox is an efficient nitrogen removal process, but it is difficult to start-up and operate, and ananammox reactor is the efficient way to resolve this problem. The start-up of anammox reactor by upflow anaerobic filter was studied. Denitrifying sludge, anaerobic sludge, and mixed sludge was inoculated on the packing materials, respectively and an autotrophic denitrification condition was provided by the simulated wastewater influent. Along with the gradual increase of matrix concentration and hydraulic load, the microflora was converted to the anaerobic ammonium oxidation(anammoxreaction. The results showed that the anammox reaction could be started by all the three sludge, and the time of start-up of denitrifying sludge, anaerobic sludge, mixed sludge was 42, 54 days and 45 days, respectively. The best result was that inoculated with denitrifying sludge with 82.2% of the total nitrogen removal rate, which started-up quickly and nitrogen was removed efficiently. Double packing effectively improved the stability of anammox process in the reactor, in which the suitable influent concentration loading for the anammox bacteria was 270 mg·L-1 and 360 mg·L-1 for ammonia nitrogen and nitrite nitrogen, respectively, and the COD concentration could not be more than 150 mg· L-1. Furthermore, there was a coexist-effect for anaerobic ammonia oxidation and methanation in this reactor system.

Three nonlinear performance relationships in the start-up state of IPMC strips based on finite element analysis

International Nuclear Information System (INIS)

Peng, Han Min; Ding, Qing Jun; Hui, Yao; Li, Hua Feng; Zhao, Chun Sheng

2010-01-01

Ionic polymer–metal composites (IPMC) are a class of electroactive polymers (EAP), and they currently attract numerous researchers to study their performance characteristics and applications. However, research on its start-up characteristics still requires more attention. In the IPMC start-up state (the moment of applying an actuation voltage at the very beginning), its mechanical performance is different in the stable working state (working for at least 10 min). Therefore, this paper focuses on three performance relationships of an IPMC strip between its maximal tip deformation and voltage, its maximal stress and voltage, as well as its maximal strain and voltage, both in the two states. Different from other reports, we found that they present nonlinear tendencies in the start-up state rather than linear ones. Therefore, based on the equivalent bimorph beam model, a finite element electromechanical coupling calculation module in the ANSYS software was utilized to simulate these characteristics. Furthermore, a test system is introduced to validate the phenomena. As a whole, these three relationships and the FEA method may be beneficial for providing control strategies effectively to IPMC actuators, especially in their start-up states

Musculoskeletal injuries in officer training: one-year follow-up.

Science.gov (United States)

Heir, T

1998-04-01

This study attempts to map the incidence and types of musculoskeletal injury during officer training. Officer cadets from three training schools (N = 321) were monitored through a 1-year training course. A total of 278 injuries were sustained by 194 of the 321 cadets (60%). The incidence was highest during an introductory 5- or 6-week period of intensive basic training. During this period, rates at various training schools ranged from 26.7 to 45.5 injuries per 100 cadet-months, which was five to nine times higher than during the rest of the year. The most common types of injury were overuse knee injuries, periostitis or compartment syndromes, Achilles tendinitis, and sprains of joint capsules or ligaments. Women and older cadets sustained more injuries than their respective male (p = 0.02) or younger (p = 0.02) counterparts. The study shows that musculoskeletal injuries occur frequently during officer training, especially during the first weeks. Recommendations for injury prevention include a more gentle start with slower progression in strain, slow introduction of combat boots, and differentiation of strain according to individual risk factors such as age and gender.

Under Voltage Lock-Out Design Rules for Proper Start-Up of Energy Autonomous Systems Powered by Supercapacitors

Science.gov (United States)

Boitier, V.; Durand Estèbe, P.; Monthéard, R.; Bafleur, M.; Dilhac, J. M.

2013-12-01

This paper deals with the issue of the initial start-up of an autonomous and battery-free system powered by an energy harvester associated with a storage subsystem based on supercapacitors initially discharged. A review of different low power Under Voltage Lock-Out (UVLO) solutions used to delay the load start-up and to avoid a useless discharge of supercapacitors is presented and discussed.

How Does Firm Survival Differ between Business Takeovers and New Venture Start-Ups?

NARCIS (Netherlands)

G. Xi (Guoqian); J.H. Block (Jörn); F. Lasch (Frank); F. Robert (Frank); A.R. Thurik (Roy)

2017-01-01

textabstractFocusing on entrepreneurship entry modes, we investigate two research questions regarding firm survival: how does the survival probability differ between business takeovers and new venture start-ups? And how do the determinants of survival differ between the two entry modes? Using a

The importance of cooperation and support for technology start-ups : a comparison of the Eindhoven and Darmstadt areas

NARCIS (Netherlands)

Halman, J.I.M.; Ulijn, J.M.; Vrande, van de V.J.A.; Umbach, F.; Ulijn, J.M.; Drillon, D.

2007-01-01

In Chapter 7, 'The importance of cooperation and support for technology start-ups: a comparison of the Eindhoven and Darmstadt areas', Johannes Halman, Jan Ulijn, Vareska van de Vrande and Frank Umbach show the results of a survey that was held among high-tech start-ups in the Eindhoven area ill the

Experimental investigation of open circuit voltage during start-up process of HT-PEMFC

International Nuclear Information System (INIS)

Abdul Rasheed, Raj Kamal; Chan, Siew Hwa

2015-01-01

Highlights: • OCV reduces non-linearly with temperature under constant power input. • The reduction gradient of OCV is observed to be non-linear with time. • Nernst equation is less accurate for HT-PEMFC start-up models. - Abstract: This paper investigates the open circuit voltage (OCV) during the warm-up process of a high temperature proton exchange membrane fuel cell (HT-PEMFC) from 140 °C to the desired temperature of 180 °C, where the temperature increases with time. The heating strategy involves the external heating of the fuel cell with constant heat input rate. The commonly used Nernst equation, to predict the OCV of the fuel cell, is usually used in transient start-up models. Thus, this papers highlights the limitations of using the Nernst equation where the temperature increases transiently with time. A polybenzimidazole-based HTPEM single cell was set up and the OCV was measured under constant heating power supplied by an external source. A parametric study was done by varying the external heating power and the effect on the OCV was observed. The results showed that the OCV reduces non-linearly with respect to temperature, when the fuel cell is subjected to a constant heating power. This behaviour is clearly in contrast with the Nernst equation, which considers the temperature as steady state. For effective comparison, the OCV was also measured under steady state temperatures, showing an almost constant reduction gradient of ∼ −2.3×10 −4 V/°C. However, the behaviour under a constant heating power show curvilinear reduction of the OCV as the temperature increases. In addition, as the external heating power is increased, the degree of curvature of the OCV profile is greater. Thus, the results clearly indicate that the accuracy of using the Nernst equation in transient thermal start-up models can be improved, by considering a non linear behaviour, as shown in this paper.

Pecularities of the start-up process in a toroidal Extrap

International Nuclear Information System (INIS)

Tendler, M.

1986-08-01

The breakdown, occuring in the EXTRAP system, in which a plasma is immersed in the purely poloidal, strongly inhomogeneous external magnetic field, is analyzed. The division into four subsequent phases of the development of these discharges is presented. It is shown that the toroidicity, the lack of electrodes and the external magnetic field strongly affects the breakdown conditions. It is emphasized that, in the presence of the external magnetic field, the internal radial electric field has to be taken into account. Two different options for the start-up scenaria are described. The discharge might either develop along the 0-line or at the periphery of the discharge. The essential parameters, which govern the development are shown to be the skin depth in the breakdown phase and the degree of the magnetization. The advantages and the disadvantages of these different scenaria are listed. It is pointed out that if the discharge starts along the 0-line the ionization might be full only in the close vicinity of this line. Methods to improve the axial homogeneity during the breakdown phase are described. (author)

Training Materials Developed for Latino Entrepreneurs

Science.gov (United States)

Abreo, Christina; Miller, Wayne; Farmer, Frank; Moon, Zola; McCullough, Stacey

2014-01-01

This article describes the materials and training program that Extension created to assist current and potential Latino immigrant entrepreneurs in starting businesses in Arkansas. The content-based educational materials describe the process for starting a new business, government regulatory requirements, start-up costs and considerations, and how…

Start-up and stabilization of an Anammox process from a non-acclimatized sludge in CSTR.

Science.gov (United States)

Bagchi, Samik; Biswas, Rima; Nandy, Tapas

2010-09-01

Development of an Anammox (anaerobic ammonium oxidation) process using non-acclimatized sludge requires a long start-up period owing to the very slow growth rate of Anammox bacteria. This article addresses the issue of achieving a shorter start-up period for Anammox activity in a well-mixed continuously stirred tank reactor (CSTR) using non-acclimatized anaerobic sludge. Proper selection of enrichment conditions and low stirring speed of 30 +/- 5 rpm resulted in a shorter start-up period (82 days). Activity tests revealed the microbial community structure of Anammox micro-granules. Ammonia-oxidizing bacteria (AOB) were found on the surface and on the outer most layers of granules while nitrite-oxidizing bacteria (NOB) and Anammox bacteria were present inside. Fine-tuning of influent NO2(-)/NH4+ ratio allowed Anammox activity to be maintained when mixed microbial populations were present. The maximum nitrogen removal rate achieved in the system was 0.216 kg N/(m(3) day) with a maximum specific nitrogen removal rate of 0.434 g N/(g VSS day). During the study period, Anammox activity was not inhibited by pH changes and free ammonia toxicity.

Correction method for critical extrapolation of control-rods-rising during physical start-up of reactor

International Nuclear Information System (INIS)

Zhang Fan; Chen Wenzhen; Yu Lei

2008-01-01

During physical start-up of nuclear reactor, the curve got by lifting the con- trol rods to extrapolate to the critical state is often in protruding shape, by which the supercritical phenomena is led. In the paper, the reason why the curve was in protruding was analyzed. A correction method was introduced, and the calculations were carried out by the practical data used in a nuclear power plant. The results show that the correction method reverses the protruding shape of the extrapolating curve, and the risk of reactor supercritical phenomena can be reduced using the extrapolated curve got by the correction method during physical start-up of the reactor. (authors)

Start-up conditions and the performance of women - and men - controlled businesses in manufacturing industries

Directory of Open Access Journals (Sweden)

Otilia Driga

2010-01-01

Full Text Available Recent research into the economic performance of women-controlled firms suggests that their underperformance may not be the result of differences in the managerial ability of women as compared to men, and that it may in fact be a consequence of differing levels of start-up resources. Using accounting data, we examine the effects that selected start-up conditions have had on the observed economic performance of a sample of 4450 Spanish manufacturing firms. The results, which indicate significant differences in the initial conditions and show lower levels of assets and employee numbers in women-controlled firms, have implications for the economic performance of such firms.

Disseminating START: training clinical psychologists and admiral nurses as trainers in a psychosocial intervention for carers of people with dementia's depressive and anxiety symptoms.

Science.gov (United States)

Lord, Kathryn; Rapaport, Penny; Cooper, Claudia; Livingston, Gill

2017-08-21

To put into practice and to evaluate an initial dissemination programme for the Strategies for Relatives (START), a clinically and cost-effective manualised intervention for family carers of people with dementia. We offered 3-hour 'train-the-trainer' sessions through the British Psychological Society and Dementia UK. Clinical psychologists and admiral nurses across the UK. After the training session, attendees completed an evaluation. Attendees were asked how they had implemented START 6 and 12 months later, and to participate in telephone interviews about their experiences of what helps or hinders implementation 1 year after training. We trained 134 clinical psychologists and 39 admiral nurses through 14 training sessions between October 2014 and September 2015 in nine UK locations and made materials available online. The 40 survey respondents had trained 75 other staff. By this time, 136 carers had received START across 11 service areas. Findings from 13 qualitative interviews indicated that some clinical psychologists had begun to implement START, facilitated by buy-in from colleagues, existing skills in delivering this type of intervention, availability of other staff to deliver the intervention and support from the research team. Admiral nurses did not supervise other staff and were unable to cascade the intervention. Where START has not been used, common barriers included lack of staff to deliver the intervention and family carer support not being a service priority. Participants wanted the training to be longer. We trained clinical psychologists and admiral nurses to deliver and implement START locally. Results from survey respondents show that it was cascaded further and used in practice in some areas, but we do not know whether START was implemented by non-respondents. Future dissemination requires management buy-in, availability of practitioners and supervisors and consideration of other ways of delivery. © Article author(s) (or their employer

The start-up phase of the national satellite forest monitoring systems for DRC and PNG: a joint venture between FAO and INPE

Science.gov (United States)

Jonckheere, I. G.; FAO UN-REDD Team Forestry Department

2011-12-01

Reducing Emissions from Deforestation and Forest Degradation (REDD) is an effort to create a financial value for the carbon stored in forests, offering incentives for developing countries to reduce emissions from forested lands and invest in low-carbon paths to sustainable development. "REDD+" goes beyond deforestation and forest degradation, and includes the role of conservation, sustainable management of forests and enhancement of forest carbon stocks. In the framework of getting countries ready for REDD+, the UN-REDD Programme, a partnership between UNEP, FAO and UNDP, assists developing countries to prepare and implement national REDD+ strategies. Designed collaboratively by a broad range of stakeholders, national UN-REDD Programmes are informed by the technical expertise of FAO, UNDP and UNEP. For the monitoring, reporting and verification, FAO supports the countries to develop satellite forest monitoring systems that allow for credible measurement, reporting and verification (MRV)of REDD+ activities. These are among the most critical elements for the successful implementation of any REDD+ mechanism, also following the COP 16 decisions in Cancun last year. The UN-REDD Programme through a joint effort of FAO and Brazil's National Space Agency, INPE, is supporting countries to develop cost-effective, robust and compatible national monitoring and MRV systems, providing tools, methodologies, training and knowledge sharing that help countries to strengthen their technical and institutional capacity for effective MRV systems. To develop strong nationally-owned forest monitoring systems, technical and institutional capacity building is key. The UN-REDD Programme, through FAO, has taken on intensive training together with INPE, and has provided technical help and assistance for in-country training and implementation for national satellite forest monitoring. The goal of the start-up phase for DRC and Papua New Guinea (PNG) in this capacity building effort is the

Numerical simulation of the heating and start-up of PWR nuclear power station

International Nuclear Information System (INIS)

Faraco-Medeiros, M.A.; Leite, C.A.T.; Ramalho, F.P.

1992-01-01

The start-up of a PWR nuclear power plant must be done within safety criteria and requires a simulation. The design of some equipment, cost and time can be optimized. A computer simulator, which allows control of all the equipment and variables into the operation, has been developed and is presented in this paper. The KWU procedure and an alternative for Angra II were simulated. The results are showed up. 09 refs, 03 figs. (B.C.A.)

Upcoming training sessions (up to end October) - Places available

CERN Multimedia

2016-01-01

Please find below a list of training sessions scheduled to take place up to the end of October with places available.   Safety and Language courses are not included here, you will find an up-to-date list in the Training Catalogue. If you need a course which is not featured  in the catalogue, please contact one of the following: your supervisor, your Departmental Training Officer or the relevant learning specialist. Leadership Training           Training Course Title Next Session Language Duration Available places Needed to maintain the session Driving for Impact and Influence 13-Sep-2016 to 14-Sep-2016 French 2 days 4 0 Essentials of People Management for CERN Supervisors (Adapted from CDP for CERN Supervisors) 22-Sep-2016 to 23-Sep-2016, 18-Nov-2016, 17-Jan-2017 to 18-Jan-2017 English 5 days 5 0 Eléments essentiels de la gestion du personnel pour les superviseurs (adapt&a...

Starting-up sequence of the AWEC-6 0 wind turbine; Secuencia de Arranaue del Aerogenerador AWEC-60

Energy Technology Data Exchange (ETDEWEB)

Avia, F.; Cruz, M. de la

1991-07-01

One of the most critical status of the wind turbines operation is the starting-up sequence and the connection to the grid, due to the actuating loads that could be several times the loads during operation at rated conditions. Due to this fact, the control strategy is very important during the starting-up sequence in order to minimize the loads on the machine. For this purpose it is necessary to analyze the behaviour of the wind turbine during that sequence in different wind conditions and machine conditions This report shows the graphic Information about fifty starting-up sequences of the AWEC-60 wind turbine of 60 m diameter and 1200 kW of rated power, recorded in April 1991 and covering all the operation range between cut-in and cut-out wind speed. (Author) 2 refs.

Market research and plan for Chinese fast-food restaurant start-up

OpenAIRE

Song, Tianhao

2017-01-01

CENTRIA UNIVERSITY OF APPLIED SCIENCES Market research and plan for Chinese fast-food restaurant start-up Instructor Due to the popularity of fast-food services in the Helsinki region, this thesis studies the possibility to find out the market opportunities for Chinese traditional fast-food business. Most of the fast-food restaurants opened are according to European flavor, so there is almost a void for Chinese fast-food to fill in, plus the Helsinki region is an area of ...

Synthesis method validation for Super-Phenix 1 start-up core studies

International Nuclear Information System (INIS)

Pipaud, J.Y.; Gastaldo, G.; Giacometti, C.

1980-09-01

This paper aims at presenting the systematic studies performed in order to check and to improve the synthesis method wich is used to optimize the configuration of the SUPER-PHENIX 1 start-up core versus the diluent subassembly location and the control rod ring insertion. A special attention is paid to the choice of the trial functions when the two rod rings have different insertion depths. Present limits of the synthesis method are given and further improvements are indicated

Physical start up of the Dalat nuclear research reactor with the core configuration exempt from neutron trap

International Nuclear Information System (INIS)

Pham Duy Hien; Ngo Quang Huy; Vu Hai Long; Tran Khanh Mai

1994-01-01

The nominal power of the reconstructed Dalat reactor is of 500 KW. After a meticulous preparation the Russian and Vietnamese teams have proceeded to the physical reactor start-up in November 1983 with the core configuration exempt from the neutron trap. The reactor has reached the physical criticality at 19h50 on 1 November 1983. The report delineates different steps of the start-up procedure. 2 refs., 3 figs., 7 tabs

How To Design A Triple Bottom Line Organization: A Start-Up Case Study

Directory of Open Access Journals (Sweden)

Bernhard Schroeder

2014-05-01

Full Text Available In today’s business environment, where success for a start-up company is measured by early revenue and profit, it can be quite challenging to design a triple bottom line organization (people/planet/profit from the very beginning. We present a case study of a U.S.-based start-up firm and discuss its early challenges, developmental processes, and current success as a triple bottom line firm. The company’s founder and CEO, with no initial product, distribution, or revenue strategy, sought to develop a company that could provide the marketplace with a valuable product while also staying true to a corporate vision of positively affecting less fortunate people. Our analysis of the case suggests that the founder’s vision, passion, transparent communication, and leveraging of partners’ resources were key elements in building the firm. We draw implications of our case study for the designers of future triple bottom line organizations.

Motives for starting up a side activity in rural areas in the Netherlands

NARCIS (Netherlands)

Markantoni, Marianna; Strijker, Derk; Koster, Sierdjan

2014-01-01

This paper explores the side activities of non-farmers in rural areas in the Netherlands and more specifically their start up motives. A side activity is a small-scale home-based activity, which provides a supplementary income to the household. Side activities may have the potential to diversify the

The influence of national culture on cooperative attitudes in high-technology start-ups

NARCIS (Netherlands)

Ulijn, J.M.; Frankort, J.T.W.; Uhlaner, L.M.; Ulijn, J.M.; Drillon, D; Lasch, F

2007-01-01

The main focus of this chapter is the concept of cooperation by hightechnology start-ups or HTSUs and in particular, the influence that culture may have upon attitudes that may predict cooperative behaviour. HTSUs are defined in this chapter as young companies whose aim is to produce technologically

LightCDD: Application of a Capability-Driven Development Method for Start-ups Development

NARCIS (Netherlands)

Koç, Hasan; Ruiz, Marcela; España, Sergio

2017-01-01

Novice innovators and entrepreneurs face the risk of designing naive business models. In fact, lack of viability in business models is perceived to be a major threat for the start-up success. Both the literature and the responses we gathered from experts in incubation present evidences of this

Entrepreneurship training in Ghana

DEFF Research Database (Denmark)

Schmidt, Leila Kæmsgaard Pagh

2017-01-01

Abstract Due to the very high youth unemployment in Northern Ghana, there is a huge need for enterprising skills among young people. A natural focus in recent years has therefore been entrepreneurship training, focusing on training young Ghanaians to start-up businesses. Unfortunately, the young...... is that adding a focus on the young entrepreneur’s means, attitude and enterprising behaviour skills to the existing focus on starting up businesses, will increase the value of the Entrepreneurship training and support the overcoming of constraints. The paper build on a design-based research project...... in collaboration with the local NGO YEfL. Based on relevant theory, a qualitative field research in Northern Ghana and a quantitative baseline survey a new Entrepreneurship Model has been designed. The new model was tested in autumn 2016 at three Entrepreneurship boot camps in Northern Ghana. The study has...

Demonstration of the LHC Safety Training Tunnel Mock-Up

CERN Multimedia

Brice, Maximilien

2014-01-01

Members of CERN's management visit the LHC tunnel mock-up at the Safety Training Centre on the Prévessin site. The facility is used to train personnel in emergency responses including the use of masks and safe evacuation.

Report of blind start-up experiments carried out on the reactor Cabri between 4. and 8. July 1966

International Nuclear Information System (INIS)

Filipczak, N.; Filipczak, W.; Furet, J.; Kaiser, J.

1967-01-01

The blind start-up of a reactor without any neutronic data concerning a relatively wide range of power dynamics can be necessary when difficulties arise in the positioning of the detector or in neutron-gamma discrimination near the multiplying medium. The object of the experiments carried out on the reactor Cabri was to check the very complete analysis of the start-up accident which was studied on an analogue computer. The number of experiments carried out (12) is not sufficient to allow a definite conclusion. Nevertheless the blind start-up method advocated by N. FILIPCZAK and W. FILIPCZAK does not appear to be incompatible with the security during the operational phase (on condition that its dynamic characteristics are close to that of the reactor Cabri). (authors) [fr

Inefficient Job Destructions and Training with Hold-up

DEFF Research Database (Denmark)

Chéron, Arnaud; Rouland, Benedicte

2011-01-01

This paper develops an equilibrium search model with endogenous job destructions and where firms decide at the time of job entry how much to invest in match-specific human capital. We first show that job destruction and training investment decisions are strongly complementary. It is possible...... that there are no firings at equilibrium. Further, training investments are confronted to a hold-up problem making the decentralized equilibrium always inefficient. We show therefore that both training subsidies and firing taxes must be implemented to bring back efficiency....

Application of the fractional neutron point kinetic equation: Start-up of a nuclear reactor

International Nuclear Information System (INIS)

Polo-Labarrios, M.-A.; Espinosa-Paredes, G.

2012-01-01

Highlights: ► Neutron density behavior at reactor start up with fractional neutron point kinetics. ► There is a relaxation time associated with a rapid variation in the neutron flux. ► Physical interpretation of the fractional order is related with non-Fickian effects. ► Effect of the anomalous diffusion coefficient and the relaxation time is analyzed. ► Neutron density is related with speed and duration of the control rods lifting. - Abstract: In this paper we present the behavior of the variation of neutron density when the nuclear reactor power is increased using the fractional neutron point kinetic (FNPK) equation with a single-group of delayed neutron precursor. It is considered that there is a relaxation time associated with a rapid variation in the neutron flux and its physical interpretation of the fractional order is related with non-Fickian effects from the neutron diffusion equation point of view. We analyzed the case of increase the nuclear reactor power when reactor is cold start-up which is a process of inserting reactivity by lifting control rods discontinuously. The results show that for short time scales of the start-up the neutronic density behavior with FNPK shows sub-diffusive effects whose absorption are government by control rods velocity. For large times scale, the results shows that the classical equation of the neutron point kinetics over predicted the neutron density regarding to FNPK.

A Parallel Restoration for Black Start of Microgrids Considering Characteristics of Distributed Generations

Directory of Open Access Journals (Sweden)

Jing Wang

2017-12-01

Full Text Available The black start capability is vital for microgrids, which can potentially improve the reliability of the power grid. This paper proposes a black start strategy for microgrids based on a parallel restoration strategy. Considering the characteristics of distributed generations (DGs, an evaluation model, which is used to assess the black start capability of DGs, is established by adopting the variation coefficient method. Thus, the DGs with good black start capability, which are selected by a diversity sequence method, are restored first in parallel under the constraints of DGs and network. During the selection process of recovery paths, line weight and node importance degree are proposed under the consideration of the node topological importance and the load importance as well as the backbone network restoration time. Therefore, the whole optimization of the reconstructed network is realized. Finally, the simulation results verify the feasibility and effectiveness of the strategy.

Entrepreneurship Education: Enhancing or Discouraging Graduate Start-Up at the University of Pretoria

Science.gov (United States)

Botha, Melodi; Ras, Rochelle

2016-01-01

In-depth interviews were conducted with a sample of BCom Entrepreneurship graduates, as well as a control group to determine whether the exposure to entrepreneurship education can enhance actual business start-up. Information was collected on how they experienced the learning approaches, and the value which they had derived from the degree. This…

Study of plasma start-up initiated by second harmonic electron cyclotron resonance heating on WEGA experiment

International Nuclear Information System (INIS)

Preynas, M.; Laqua, H. P.; Otte, M.; Stange, T.; Aßmus, D.; Wauters, T.

2014-01-01

Although both 1st harmonic ordinary mode (O1) and 2nd harmonic extra-ordinary mode (X2) have been successfully used to initiate pre-ionization and breakdown in many devices, a complete theoretical model is still missing to explain the success of this method. Moreover, some experimental observations are not completely understood, such as what occurs during the delay time between the turn-on of ECRH power and first signals of density or light measurements. Since during this free period the ECRH power has to be absorbed by in-vessel components, it is of prime importance to know what governs this delay time. Recently, dedicated start-up experiments have been performed on WEGA, using a 28 GHz ECRH system in X2-mode. This machine has the interesting capability to be run also as a tokamak allowing comparative experiments between stellarator (ι/2π > 0) and tokamak (ι/2π = 0) configurations. Different scans in heating power, neutral gas pressure, and rotational transform (ι) show clearly that the start-up is a two step process. A first step following the turn-on of the ECRH power during which no measurable electron density (or just above the noise level in some cases), ECE and radiated power is detected. Its duration depends strongly on the level of injected power. The second step corresponds to the gas ionization and plasma expansion phase, with a velocity of density build-up and filling-up of the vessel volume depending mainly on pressure, gas and rotational transform. Moreover, an interesting scenario of ECRH pre-ionization without loop voltage in tokamak configuration by applying a small optimal vertical field is relevant for start-up assistance on future experiments like ITER. The results from this experimental parametric study are useful for the modeling of the start-up assisted by the second harmonic electron cyclotron resonance heating. The aim of this work is to establish predictive scenarios for both ITER and W7-X operation

Study of plasma start-up initiated by second harmonic electron cyclotron resonance heating on WEGA experiment

Energy Technology Data Exchange (ETDEWEB)

Preynas, M.; Laqua, H. P.; Otte, M.; Stange, T.; Aßmus, D. [Max Planck Institut für Plasmaphysik, EURATOM Association, D-17491 Greifswald (Germany); Wauters, T. [Association Euratom-Belgian State, LPP-ERM/KMS, 1000 Brussels (Belgium)

2014-02-12

Although both 1st harmonic ordinary mode (O1) and 2nd harmonic extra-ordinary mode (X2) have been successfully used to initiate pre-ionization and breakdown in many devices, a complete theoretical model is still missing to explain the success of this method. Moreover, some experimental observations are not completely understood, such as what occurs during the delay time between the turn-on of ECRH power and first signals of density or light measurements. Since during this free period the ECRH power has to be absorbed by in-vessel components, it is of prime importance to know what governs this delay time. Recently, dedicated start-up experiments have been performed on WEGA, using a 28 GHz ECRH system in X2-mode. This machine has the interesting capability to be run also as a tokamak allowing comparative experiments between stellarator (ι/2π > 0) and tokamak (ι/2π = 0) configurations. Different scans in heating power, neutral gas pressure, and rotational transform (ι) show clearly that the start-up is a two step process. A first step following the turn-on of the ECRH power during which no measurable electron density (or just above the noise level in some cases), ECE and radiated power is detected. Its duration depends strongly on the level of injected power. The second step corresponds to the gas ionization and plasma expansion phase, with a velocity of density build-up and filling-up of the vessel volume depending mainly on pressure, gas and rotational transform. Moreover, an interesting scenario of ECRH pre-ionization without loop voltage in tokamak configuration by applying a small optimal vertical field is relevant for start-up assistance on future experiments like ITER. The results from this experimental parametric study are useful for the modeling of the start-up assisted by the second harmonic electron cyclotron resonance heating. The aim of this work is to establish predictive scenarios for both ITER and W7-X operation.

Efficient generation of image chips for training deep learning algorithms

Science.gov (United States)

Han, Sanghui; Fafard, Alex; Kerekes, John; Gartley, Michael; Ientilucci, Emmett; Savakis, Andreas; Law, Charles; Parhan, Jason; Turek, Matt; Fieldhouse, Keith; Rovito, Todd

2017-05-01

Training deep convolutional networks for satellite or aerial image analysis often requires a large amount of training data. For a more robust algorithm, training data need to have variations not only in the background and target, but also radiometric variations in the image such as shadowing, illumination changes, atmospheric conditions, and imaging platforms with different collection geometry. Data augmentation is a commonly used approach to generating additional training data. However, this approach is often insufficient in accounting for real world changes in lighting, location or viewpoint outside of the collection geometry. Alternatively, image simulation can be an efficient way to augment training data that incorporates all these variations, such as changing backgrounds, that may be encountered in real data. The Digital Imaging and Remote Sensing Image Image Generation (DIRSIG) model is a tool that produces synthetic imagery using a suite of physics-based radiation propagation modules. DIRSIG can simulate images taken from different sensors with variation in collection geometry, spectral response, solar elevation and angle, atmospheric models, target, and background. Simulation of Urban Mobility (SUMO) is a multi-modal traffic simulation tool that explicitly models vehicles that move through a given road network. The output of the SUMO model was incorporated into DIRSIG to generate scenes with moving vehicles. The same approach was used when using helicopters as targets, but with slight modifications. Using the combination of DIRSIG and SUMO, we quickly generated many small images, with the target at the center with different backgrounds. The simulations generated images with vehicles and helicopters as targets, and corresponding images without targets. Using parallel computing, 120,000 training images were generated in about an hour. Some preliminary results show an improvement in the deep learning algorithm when real image training data are augmented with

Starting Up a Company in a Mature Market: Wise or Foolish ?

Science.gov (United States)

Biberger, Maximilian

SDCmaterials, Inc. (SDC) is a venture backed, mature start up in the automotive sector. Moreover: Catalytic Converters for vehicles and stationary applications. The company has invented and developed environmentally friendly, novel materials as well as material integration techniques for catalytic converters based on a proprietary and patented nanotechnology. Traditionally catalysts require large amounts of PGMs (Platinum Group Metals), more than USD 10B per year, in order to treat vehicle emissions. Due to that, the catalytic converter is the single most expensive piece part in a vehicle. The currently used technologies have served the industry well. However, as emission standards dramatically tighten, particularly in China, the demand for more fuel efficient and Hybrid vehicles increases, this technology begins to start showing limitations as it can meet the aforementioned demands only by increasing the PGM amount per vehicle. This in turn will increase the cost per vehicle and / or reduce margins for the automotive industry, and in addition to that impact the environment negatively. In contrast to existing technologies, the SDC based technology can meet future emission goals by maintaining, or even reducing, the PGM amount required to treat exhaust emissions. This results in tremendous savings for the consumer and the automotive industry, as well as a significantly better stewardship of natural resources and clean manufacturing. In the present paper the pros and cons of starting a nanotechnology company in a mature market are presented. Both from a business & economics, as well as from a technology point of view. The case is made that it is possible to start a company in a mature market and that novel technologies can compete economically with 40+ old year technologies.

Deployable nuclear fleet based on available quantities of uranium and reactor types – the case of fast reactors started up with enriched uranium

Directory of Open Access Journals (Sweden)

Baschwitz Anne

2016-01-01

Full Text Available International organizations regularly produce global energy demand scenarios. To account for the increasing population and GDP trends, as well as to encompass evolving energy uses while satisfying constraints on greenhouse gas emissions, long-term installed nuclear power capacity scenarios tend to be more ambitious, even after the Fukushima accident. Thus, the amounts of uranium or plutonium needed to deploy such capacities could be limiting factors. This study first considers light-water reactors (LWR, GEN III using enriched uranium, like most of the current reactor technologies. It then examines the contribution of future fast reactors (FR, GEN IV operating with an initial fissile load and then using depleted uranium and recycling their own plutonium. However, as plutonium is only available in limited quantity since it is only produced in nuclear reactors, the possibility of starting up these Generation IV reactors with a fissile load of enriched uranium is also explored. In one of our previous studies, the uranium consumption of a third-generation reactor like an EPR™ was compared with that of a fast reactor started up with enriched uranium (U5-FR. For a reactor lifespan of 60 years, the U5-FR consumes three times less uranium than the EPR and represents a 60% reduction in terms of separative work units (SWU, though its requirements are concentrated over the first few years of operation. The purpose of this study is to investigate the relevance of U5-FRs in a nuclear fleet deployment configuration. Considering several power demand scenarios and assuming different finite quantities of available natural uranium, this paper examines what types of reactors must be deployed to meet the demand. The deployment of light-water reactors only is not sustainable in the long run. Generation IV reactors are therefore essential. Yet when started up with plutonium, the number of reactors that can be deployed is also limited. In a fleet deployment

78 FR 34664 - Prospective Grant of Start-up Exclusive Evaluation License: Portable Device and Method for...

Science.gov (United States)

2013-06-10

...-up Exclusive Evaluation License: Portable Device and Method for Detecting Hematomas AGENCY: National... hematomas. Upon the expiration or termination of the start-up exclusive evaluation license, ArcheOptix will... device and method for detecting hematomas based on near infrared light emitted perpendicularly into a...

Effective Training for Millennial Students

Science.gov (United States)

Werth, Eric P.; Werth, Loredana

2011-01-01

A generational shift is occurring in training environments worldwide, a shift that promises to bring with it a dramatic and long-lasting impact. Just as years ago, those of the Baby Boomer generation passed the torch to Generation X, today the process is starting anew with Generation X and those who have come to be known as the Millennials.…

Indigenous microbial capability in solid manure residues to start-up solid-phase anaerobic digesters.

Science.gov (United States)

Yap, S D; Astals, S; Jensen, P D; Batstone, D J; Tait, S

2017-06-01

Batch solid-phase anaerobic digestion is a technology for sustainable on-farm treatment of solid residues, but is an emerging technology that is yet to be optimised with respect to start-up and inoculation. In the present study, spent bedding from two piggeries (site A and B) were batch digested at total solids (TS) concentration of 5, 10 and 20% at mesophilic (37°C) and thermophilic (55°C) temperatures, without adding an external inoculum. The results showed that the indigenous microbial community present in spent bedding was able to recover the full methane potential of the bedding (140±5 and 227±6L CH 4 kgVS fed -1 for site A and B, respectively), but longer treatment times were required than for digestion with an added external inoculum. Nonetheless, at high solid loadings (i.e. TS level>10%), the digestion performance was affected by chemical inhibition due to ammonia and/or humic acid. Thermophilic temperatures did not influence digestion performance but did increase start-up failure risk. Further, inoculation of residues from the batch digestion to subsequent batch enhanced start-up and achieved full methane potential recovery of the bedding. Inoculation with liquid residue (leachate) was preferred over a solid residue, to preserve treatment capacity for fresh substrate. Overall, the study highlighted that indigenous microbial community in the solid manure residue was capable of recovering full methane potential and that solid-phase digestion was ultimately limited by chemical inhibition rather than lack of suitable microbial community. Copyright © 2017 Elsevier Ltd. All rights reserved.

Common lessons drawn from different laboratories analyses of super-phenix start-up experiments

International Nuclear Information System (INIS)

Cabrillat, J.C.; Salvatores, M.; Carta, M.; D'Angelo, A.; Giese, H.; De Wouters, R.; Newton, T.; Harrison, P.; Sztark, H.; Wehmann, U.

1990-01-01

Measurements issued from the SUPER-PHENIX start-up experiments have been analysed by the different partners within the European Community with their own data and methods. Common lessons can be drawn from the different analyses and recommendations made on the definition of the characteristics of a common European formulaire and in the actions in support of its qualification

Program of RA reactor start-up to nominal power; Program dizanja reaktora 'RA' na nominalnu snagu

Energy Technology Data Exchange (ETDEWEB)

NONE

1959-07-01

The zero start-up program is followed by the program of RA reactor start-up to nominal power. This program is desed in detail and includes the following measurements: radiation characteristics at the exit of the channels; gamma and fast neutron dose distribution in the reactor; influence of absorbers on the reactivity; temperature effect; absolute flux and calibration of ionization chambers; xenon effect; thermal and hydraulics; dosimetry around the reactor; neutron flux in the reactor core and in the reactor hall; heavy water level; thermal characteristics after shutdown. A list of measuring devices and instrumentation is included with the detailed action plan and list of responsible staff members.

Powerful nanosecond pulse train generator

International Nuclear Information System (INIS)

Isakov, I.F.; Logachev, E.I.; Opekunov, M.S.; Pechenkin, S.A.; Remnev, G.E.; Usov, Yu.P.

1987-01-01

A generator permitting to shape on the load pulsed with the repetition frequency of 10 3 -10 6 Hz and more is described. The amplitude of shaped voltage pulses is up to 150 kV at pulse duration equal to 50 ns. The generator comprises connected in-series with the load two shaping and two transmission lines realized on the base of the KVI-300 low-ohmic cable. The shaping lines are supplied from two independently connected pulse voltage generators for obtaining time interval between pulses > 10 -6 s; they may be also supplied from one generator for obtaining time interval -6 s. At the expense of reducing losses in the discharge circuit the amplitude of the second pulse grows with increase of time interval between pulses up to 300 ns, further on the curve flat-topping exists. The described generator is used in high-current accelerators, in which the primary negative pulse results in generation of explosive-emission plasma, and the second positive pulse provides ion beam shaping including ions of heavy metal used for production of a potential electrode. The generator multipulse mode is used for successive ion acceleration in the transport system

Public policy for start-up entrepreneurship with venture capital and bank finance

DEFF Research Database (Denmark)

Keuschnigg, Christian; Nielsen, Søren Bo

2003-01-01

This paper proposes and analyses a model of start-up investment. Innovative entrepreneursare commercially inexperienced and can benefit from venture capital support. Only part ofthem succeed in matching with a venture capitalist while the rest must resort to standard bankfinance. We consider a nu...... a number of policies to promote entrepreneurship and venture capitalbacked innovation.JEL Classification: D82, G24, G28, H24.Keywords: venture capital bank finance, matching, moral hazard, public policy....

Starting Up in a Down Market, with a Boost From Entrepreneurship Graduate Programs

Science.gov (United States)

Taylor, Cyrus

2003-03-01

In the late 1990's, it seemed that any two graduate students and their dog could start and grow a high-tech company. With the collapse of, first, the internet sector, and, more recently, the telecommunications sector, there has been a traumatic shake-out among high tech firms, and the challenges facing new firms appear to have greatly increased. This talk will highlight the keys for physics entrepreneurs to survive and even thrive in this environment, with a special initial boost from new graduate programs combining business school and physics training. The infrastructure needed by educational programs designed to empower physicists as entrepreneurs is discussed.

TAX OPTIMIZATION FOR BUSINESS START-UPS IN ROMANIA

Directory of Open Access Journals (Sweden)

Maria Zenovia GRIGORE

2015-07-01

Full Text Available One of the most important early decisions for an entrepreneur is choosing the optimal form of organization for his business. According to the data provided by the Registry of Commerce, Romanian entrepreneurs usually choose between: Limited Liability Company (LLC and Authorized Natural Person (ANP. LLCs offer liability protection for its owner. This advantage has made the LLC a popular business form for smaller companies, who don't plan to grow the business significantly. Newly set-up companies in Romania are required to apply the micro-companies revenues tax system starting with their first year of operation. For next years, this system is applied only if annual turnover does not exceed EUR 65,000. An individual can pursue an economic activity as an ANP. An advantage of the ANP is the reduced number of tax returns field. In adition, in certain circumstances, an ANP may opt for a very advantageous system of taxation of personal income tax, based on predetermined fixed income. Each one of these entities involves fiscal advantages and disadvantages, which we will try to highlight in this paper.

Method of start-up of rotary plug sealing devices in FBR type reactors

International Nuclear Information System (INIS)

Sakuragi, Masanori; Akita, Haruo

1980-01-01

Purpose: To rapidly and safely start-up the rotary plug sealing device by controlling to eliminate the pressure difference in the pressures of gases exerting on the liquid surfaces in the inner and the outer cylinders of a sealing alloy vessel in the rotary plug of a FBR type reactor. Method: In a case where an abnormal state results in the pressure difference of gases exerted on the liquid surfaces in the inner and the outer cylinders of a vessel charged with sealing alloy in a rotary plug and the sealing valve for the back-up gas supply tube is rapidly closed to seal the sealing portion, the pressure in the gas supply tube is controlled so that the pressure difference in the gases exerted on the liquid surfaces in the inner and outer cylinders while closing the sealing valve. Then, after conforming that the pressure is controlled to a predetermined level at which the pressure difference can be regarded to be zero, the sealing valve is gradually opened while regulating the pressure in the gas supply tube so as to maintain the pressure difference to a predetermined level. This prevents the occurrence of external disturbances upon opening of the sealing valve and enables rapid and safety start-up for the rotary plug sealing device. (Moriyama, K.)

Low-level waste cement solidification design, installation, and start-up

International Nuclear Information System (INIS)

Jezek, G.R.

1988-08-01

This report describes the design, installation, and start-up activities of the Cement Solidification System (CSS) at the West Valley Demonstration Project (WVDP), West Valley, New York. The CSS, designed to operate within an existing process cell, automatically and remotely solidifies low-level nuclear waste by mixing it with Portland Type I cement. The qualified waste form mixture is placed into square, 270-litre (71-gallon) metal drums. The drums have an integral polyethylene liner to protect the carbon-steel material from potential corrosion. The CSS produces drums at a continuous operation rate of four drums per hour. All system processing data is monitored by a computerized Data Acquisition System (DAS). 6 figs

Utilisation and performance of sodium instrumentation during start-up and initial operation of Phenix

International Nuclear Information System (INIS)

Lions, N.; Buis, H.; Baron, J.; Fournier, C.; Gourdon, J.

1976-01-01

The main process-instruments on the Phenix reactor are presented with the exception of the FFDL System and of the hydrogen-detector which are described in other papers. The results obtained during reactor start-up and during initial operation of the nuclear power-station are given [fr

Creating a Business Plan for a Start-up Business Consultancy in Namibia

OpenAIRE

von Wietersheim, Julia

2011-01-01

The objective of this Thesis is to investigate the process of creating an extensive Business Plan and thereby to practically apply the theory studied during the Degree Programme of International Business. To achieve this objective, a practical business plan for a start-up Business Consultancy in Namibia (called VW-Business Consulting) is created, which at the same time provides a deeper understanding of the current demand for, and awareness of, business consulting companies in Namibia. An...

Viscoelasticity, nonlinear shear start-up, and relaxation of entangled star polymers

KAUST Repository

Snijkers, Frank

2013-07-23

We report on a detailed rheological investigation of well-defined symmetric entangled polymer stars of low functionality with varying number of arms, molar mass of the arms, and solvent content. Emphasis is placed on the response of the stars in simple shear, during start-up, and for relaxation upon flow cessation. To reduce experimental artifacts associated with edge fracture (primarily) and wall slip, we employ a homemade cone-partitioned plate fixture which was successfully implemented in recent studies. Reliable data for these highly entangled stars could be obtained for Weissenberg numbers below 300. The appearance of a stress overshoot during start-up with a corresponding strain approaching a value of 2 suggests that in the investigated shear regime the stars orient but do not stretch. This is corroborated by the fact that the empirical Cox-Merx rule appears to be validated, within experimental error. On the other hand, the (shear) rate dependent steady shear viscosity data exhibit a slope smaller than the convective constraint release slope of -1 (for linear polymers) for the investigated range of rates. The broadness of the stress overshoot reflects the broad linear relaxation spectrum of the stars. The initial stress relaxation rate, reflecting the initial loss of entanglements due to the action of convective constraint release in steady shear flow, increases with Weissenberg number. More importantly, when compared against the relevant rates for comb polymers with relatively short arms, the latter are slower at larger Weissenberg numbers. At long times, the relaxation data are consistent with the linear viscoelastic data on these systems. © 2013 American Chemical Society.

Start-up and operation strategies on the liquefied food waste anaerobic digestion and a full-scale case application.

Science.gov (United States)

Meng, Ying; Shen, Fei; Yuan, Hairong; Zou, Dexun; Liu, Yanping; Zhu, Baoning; Chufo, Akiber; Jaffar, Muhammad; Li, Xiujin

2014-11-01

Batch anaerobic digestion was employed to investigate the efficient start-up strategies for the liquefied food waste, and sequencing batch digestion was also performed to determine maximum influent organic loading rate (OLR) for efficient and stable operation. The results indicated that the start-up could be well improved using appropriate wastewater organic load and food-to-microorganism ratios (F/M). When digestion was initialized at low chemical oxygen demand (COD) concentration of 20.0 gCOD L(-1), the start-up would go well using lower F/M ratio of 0.5-0.7. The OLR 7.0 gCOD L(-1) day(-1) was recommended for operating the ASBR digestion, in which the COD conversion of 96.7 ± 0.53% and biomethane yield of 3.5 ± 0.2 L gCOD(-1) were achieved, respectively. The instability would occur when OLR was higher than 7.0 gCOD L(-1) day(-1), and this instability was not recoverable. Lipid was suggested to be removed before anaerobic digestion. The anaerobic digestion process in engineering project ran well, and good performance was achieved when the start-up and operational strategies from laboratory study were applied. For case application, stable digestion performance was achieved in a digester (850 m(3) volume) with biogas production of 1.0-3.8 m(3) m(-3) day(-1).

Simulation study of induced EMFs and the suppression during SST-1 start-up

Energy Technology Data Exchange (ETDEWEB)

Jain, V., E-mail: vishal@ipr.res.in; Sharma, D.; Vardhrajulu, A.; Gupta, C.N.; Srinivasan, R.; Daniel, R.

2015-11-15

Highlights: • Induced EMFs study in PF coils during SST-1 start up using MATlab simulink. • Integration of wave shaping network to generate practical OT current profile. • This study would protect coil insulation with identifying RC circulating network. • Study of MOV technique for circulation of current through RC. - Abstract: Steady State Superconducting Tokamak (SST-1) comprises of various copper and superconducting coils for generating magnetic field for initiation, providing equilibrium and shaping of plasma in tokamak. In this paper, an attempt is made to study the induced EMF in superconducting poloidal field coils (PF coils) due to fast ramp down of current in ohmic transformer copper coils (OT coils) for SST-1 plasma initiation. The fast ramp down of current, from few kA to zero amperes in just 50–100 ms in OT coils, is required to achieve plasma breakdown and ramp up of plasma current in tokamak. However, it induces nearly 5 kV EMF in one of the SST-1 PF coils that can damage the coil insulation and also bias negatively the electronic switching of power supply. It is necessary to maintain induced EMF below 1 kV in all PF coils for safe operation of SST-1. The induced EMF up to 1 kV can be clamped without any need of protection and circulating current. If the induced EMF is in excess of 1 kV, then it has to allow the circulation of current through RC network for coil protection from overvoltage. These circulating currents in PF coils will affect the shaping of plasma. In this paper, the induced EMF in PF coils are simulated using MATlab simulink for a typical SST-1 current profile of OT coils. Further, this simulation study is used to design the protection system for PF coils. In this paper, the worst-case induced EMF scenario is considered by excluding the effect of passive elements like vacuum vessel and cryostat on mutual coupling parameters. However, the implementation of the EMF suppression scheme need more elaborated study with considering

Attosecond pulse trains generated using two color laser fields

International Nuclear Information System (INIS)

Mauritsson, J.; Louisiana State University, Baton Rouge, LA; Johnsson, P.; Gustafsson, E.; L'Hullier, A.; Schafer, K.J.; Gaarde, M.B.

2006-01-01

Complete test of publication follows. We present the generation of attosecond pulse trains from a superposition of an infrared (IR) laser field and its second harmonic. Our attosecond pulses are synthesized by selecting a number of synchronized harmonics generated in argon. By adding the second harmonic to the driving field the inversion symmetry of generation process is broken and both odd and even harmonics are generated. Consecutive half cycles in the two color field differ beyond the simple sign change that occurs in a one color field and have very different shapes and amplitudes. This sub-cycle structure of the field, which governs the generation of the attosecond pulses, depends strongly on the relative phase and intensity of the two fields, thereby providing additional control over the generation process. The generation of attosecond pulses is frequently described using the semi-classical three step model where an electron is: (1) ionized through tunneling ionization during one half cycle; (2) reaccelerated back towards the ion core by the next half cycle; where it (3) recombines with the ground-state releasing the access energy in a short burst of light. In the two color field the symmetry between the ionizing and reaccelerating field is broken, which leads to two possible scenarios: the electron can either be ionized during a strong half cycle and reaccelerated by a weaker field or vice versa. The periodicity is a full IR cycle in both cases and hence two trains of attosecond pulses are generated which are offset from each other. The generation efficiency, however, is very different for the two cases since it is determined mainly by the electric field strength at the time of tunneling and one of the trains will therefore dominate the other. We investigate experimentally both the spectral and temporal structure of the generated attosecond pulse trains as a function of the relative phase between the two driving fields. We find that for a wide range of

[Start-up grants for young scientists in German medical universities : Can the clinical scientist be saved?

Science.gov (United States)

Pabst, R; Linke, P B; Neudeck, N B A; Schmiel, M; Ernst, S B

2016-12-01

German medical faculties currently have severe financial problems. There is the conflict between financing teaching medical students, inpatient and outpatient costs and supporting basic and applied research. Young postdocs can apply for a grant to start research projects to establish techniques on publishing data as a basis for applying for grants from the German Research Foundation or foundations with a critical review system. Successful applicants from the years 1998-2011 were asked to answer a questionnaire. The annual number of applications ranged from 28 to 96 per year. Within the first period of our analysis ranging from 1998 to 2004, a mean number of 69.5 % ± 14.0 % of submitted grant applications were approved annually in comparison to an average approval of 30.9 % ± 11 % in the years 2006-2001. In total 353 projects were funded with a mean amount of money for a project of approximately 18,640 EUR. The mean amount of external grant money following the start-up period was 7.2 times the money initially spent. That is an excellent return of investment. There were no differences between applicants from the department of surgery or department of internal medicine. In the meantime, 56 % of men and 42 % of women have achieved the academic degree university lecturer (privatdozent). Furthermore, 71 % of the participants evaluated this start-up research as supportive for their postdoctoral qualification (habilitation). The program for initial investment for young postdocs by internal start-up grants is overall successful.

Nuclear start-up, testing and core management of the Fast Test Reactor (FTR)

International Nuclear Information System (INIS)

Bennett, R.A.; Daughtry, J.W.; Harris, R.A.; Jones, D.H.; Nelson, J.V.; Rawlins, J.A.; Rothrock, R.B.; Sevenich, R.A.; Zimmerman, B.D.

1980-01-01

Plans for the nuclear start-up, low and high power physics testing, and core management of the Fast Test Reactor (FTR) are described. Owing to the arrangement of the fuel-handling system, which permits continuous instrument lead access to experiments during refuelling, it is most efficient to load the reactor in an asymmetric fashion, filling one-third core sectors at a time. The core neutron level will be monitored during this process using both in-core and ex-core detectors. A variety of physics tests are planned following the core loading. Because of the experimental purpose of the reactor, these tests will include a comprehensive characterization programme involving both active and passive neutron and gamma measurements. Following start-up tests, the FTR will be operated as a fast neutron irradiation facility, to test a wide variety of fast reactor core components and materials. Nuclear analyses will be made prior to each irradiation cycle to confirm that the planned arrangement of standard and experimental components satisfies all safety and operational constraints, and that all experiments are located so as to achieve their desired irradiation environment. (author)

A 190 mV start-up and 59.2% efficiency CMOS gate boosting voltage doubler charge pump in 0.18 µm standard CMOS process for energy harvesting

Science.gov (United States)

Yoshida, Minori; Miyaji, Kousuke

2018-04-01

A start-up charge pump circuit for an extremely low input voltage (V IN) is proposed and demonstrated. The proposed circuit uses an inverter level shifter to generate a 2V IN voltage swing to the gate of both main NMOS and PMOS power transistors in a charge pump to reduce the channel resistance. The proposed circuit is fully implemented in a standard 0.18 µm CMOS process, and the measurement result shows that a minimum input voltage of 190 mV is achieved and output power increases by 181% compared with the conventional forward-body-bias scheme at a 300 mV input voltage. The proposed scheme achieves a maximum efficiency of 59.2% when the input voltage is 390 mV and the output current is 320 nA. The proposed circuit is suitable as a start-up circuit in ultralow power energy harvesting power management applications to boost-up from below threshold voltage.

Stepping up Open Science Training for European Research

Directory of Open Access Journals (Sweden)

Birgit Schmidt

2016-06-01

Full Text Available Open science refers to all things open in research and scholarly communication: from publications and research data to code, models and methods as well as quality evaluation based on open peer review. However, getting started with implementing open science might not be as straightforward for all stakeholders. For example, what do research funders expect in terms of open access to publications and/or research data? Where and how to publish research data? How to ensure that research results are reproducible? These are all legitimate questions and, in particular, early career researchers may benefit from additional guidance and training. In this paper we review the activities of the European-funded FOSTER project which organized and supported a wide range of targeted trainings for open science, based on face-to-face events and on a growing suite of e-learning courses. This article reviews the approach and experiences gained from the first two years of the project.

Shortening start-up and an extension of the power unit load range

Directory of Open Access Journals (Sweden)

Taler Jan

2017-01-01

Full Text Available A power plant with additional water pressure tanks was proposed. The maximum rise in the block electric power resulting from the shut-off of low-pressure regenerative heaters was determined. At that time, the boiler is fed with hot water from water pressure tanks acting as heat accumulators. Accumulation of hot water in water tanks is also proposed in the periods of the power unit small load. In order to lower the plant electric power in the off-peak night hours, water heated to the nominal temperature in low-pressure regenerative heaters is directed from the feed water tank to pressure tanks. The water accumulated during the night is used to feed the boiler during the period of peak demand for electricity. Pressure accumulators are proposed to be used for the rapid start-up of the boiler from a cold state. The evaporator of the boiler is filled at the beginning of start-up with hot water from the accumulators. Drops in the power block electric power were determined for different capacities of the tanks and periods when they are charged. The tanks may also be used to ensure a sudden increase in the electric power of the unit that is operating in the automatic system of frequency and power control (in Polish: ARCM.

Chapter 9. Personnel qualification and training

International Nuclear Information System (INIS)

2000-01-01

In 1999 the Nuclear Regulatory Authority of the Slovak Republic (UJD) focused on the overall training system and on developing programmes for individual categories for NPP V-1 Bohunice, NPP V-2 Bohunice, NPP Mochovce and SE-VYZ. The fundamental theoretical and periodical training for both Bohunice and Mochovce NPPs personnel, simulator training for NPP Bohunice, and periodical simulator training for Bohunice personnel is carried out by the VUJE Training center in Trnava, whereas the simulator training and periodical training for NPP Mochovce is carried at Mochovce plant. Based on a successful passing of examination before the examining committee, UJD issues, a certificate on special professional skills of selected staff of nuclear installations for specific activity for the given type of nuclear installation and for the following positions: (a)Shift manager for scientific start up with the right of manipulation; (b) Shift supervisor; (c) Unit supervisor; (d) Primary circuit operator; (e) Secondary circuit operator; (f) Reactor physicist; (g) Shift manager for scientific start up without the right of manipulation. Examination of selected personnel is described. Last year the examining committee held twelve session for oral theoretical examination. The number of licenses issued in 1999 and the total number of valid licenses is given.Conclusions from inspections carried out by UJD and inspections and tests carried out by the NPP operators in 1999, as well as results from operation and start up of nuclear units confirm that the standard of professional skills of the staff at nuclear installations a high standard of operational safety is being achieved on a permanent basis. Increasing the qualification of UJD staff was done in a form of training and courses scheduled in the plan of training for the staff for 1999. These training, composed of specialized qualification study, functional study, as well as study aimed at maintaining qualification. Training courses organized

The X-Factor of Cultivating Successful Entrepreneurial Technology-Enabled Start-Ups

Directory of Open Access Journals (Sweden)

Elsje Scott

2016-10-01

Full Text Available In the fast changing global economic landscape, the cultivation of sustainable entrepreneurial ventures is seen as a vital mechanism that will enable businesses to introduce new innovative products to the market faster and more effectively than their competitors. This research paper investigated phenomena that may play a significant role when entrepreneurs implement creative ideas resulting in successful technology enabled start-ups within the South African market place. Constant and significant changes in technology provide several challenges for entrepreneurship. Various themes such as innovation, work experience, idea generation, education and partnership formation have been explored to assess their impact on entrepreneurship. Reflection and a design thinking approach underpinned a rigorous analysis process to distill themes from the data gathered through semi structured interviews. From the findings it was evident that the primary success influencers include the formation of partnership, iterative cycles, and certain types of education. The secondary influencers included the origination of an idea, the use of innovation. and organizational culture as well as work experience. This research illustrates how Informing Science as a transdisicpline can provide a philosophical underpinning to communicate and synthesise ideas from constituent disciplines in an attempt to create a more cohesive whole. This diverse environment, comprising people, technology, and business, requires blending different elements from across diverse fields to yield better science. With this backdrop, this preliminary study provides an important foundation for further research in the context of a developing country where entrepreneurial ventures may have a socio-economical impact. The themes that emerged through this study could provide avenues for further research.

UASB reactor start up in real scale for malting effluent

International Nuclear Information System (INIS)

Lopez, I.; Passeggi, M.; Boix, C.; Barcia, R.; Borzacconi, L.; Liebermann, L.

2005-01-01

An Imhoff tank was reconstructed into a 250 m3 UASB reactor in order to treat a malting plant wastewater.The UASB was inoculated with sludge from an anaerobic lagoon used for slaughterhouse wastewater treatment.The fat present in the inoculated sludge did not affect the start up performance. After two month of operation the reactor achieved full load with COD removal higher than 80% and a biogas production of 300 m3/day. The mean diameter of granules was 0a.milimeters and the Specific Methanogenic Activity was 0.25 g COD/gVSS.d The banquet development throughout time (solids concentrations at different heights, granule size, methanogenic activity) was monitored. A yield coefficient of 0.09 gVSS/g COD rem was found

Lead generation and examples opinion regarding how to follow up hits.

Science.gov (United States)

Orita, Masaya; Ohno, Kazuki; Warizaya, Masaichi; Amano, Yasushi; Niimi, Tatsuya

2011-01-01

In fragment-based drug discovery (FBDD), not only identifying the starting fragment hit to be developed but also generating a drug lead from that starting fragment hit is important. Converting fragment hits to leads is generally similar to a high-throughput screening (HTS) hits-to-leads approach in that properties associated with activity for a target protein, such as selectivity against other targets and absorption, distribution, metabolism, excretion, and toxicity (ADME/Tox), and physicochemical properties should be taken into account. However, enhancing the potency of the fragment hit is a key requirement in FBDD, unlike HTS, because initial fragment hits are generally weak. This enhancement is presently achieved by adding additional chemical groups which bind to additional parts of the target protein or by joining or combining two or more hit fragments; however, strategies for effecting greater improvements in effective activity are needed. X-ray analysis is a key technology attractive for converting fragments to drug leads. This method makes it clear whether a fragment hit can act as an anchor and provides insight regarding introduction of functional groups to improve fragment activity. Data on follow-up chemical synthesis of fragment hits has allowed for the differentiation of four different strategies: fragment optimization, fragment linking, fragment self-assembly, and fragment evolution. Here, we discuss our opinion regarding how to follow up on fragment hits, with a focus on the importance of fragment hits as an anchor moiety to so-called hot spots in the target protein using crystallographic data. Copyright © 2011 Elsevier Inc. All rights reserved.

Construction and start-up of a 250 kW natural gas fueled MCFC demonstration power plant

Energy Technology Data Exchange (ETDEWEB)

Figueroa, R.A.; Carter, J.; Rivera, R.; Otahal, J. [San Diego Gas & Electric, CA (United States)] [and others

1996-12-31

San Diego Gas & Electric (SDG&E) is participating with M-C Power in the development and commercialization program of their internally manifolded heat exchanger (IMHEX{reg_sign}) carbonate fuel cell technology. Development of the IMHEX technology base on the UNOCAL test facility resulted in the demonstration of a 250 kW thermally integrated power plant located at the Naval Air Station at Miramar, California. The members of the commercialization team lead by M-C Power (MCP) include Bechtel Corporation, Stewart & Stevenson Services, Inc., and Ishikawajima-Harima Heavy Industries (IHI). MCP produced the fuel cell stack, Bechtel was responsible for the process engineering including the control system, Stewart & Stevenson was responsible for packaging the process equipment in a skid (pumps, desulfurizer, gas heater, turbo, heat exchanger and stem generator), IHI produced a compact flat plate catalytic reformer operating on natural gas, and SDG&E assumed responsibility for plant construction, start-up and operation of the plant.

Challenges in Bootstrapping a Start-Up Venture: Keenga Research Turning the Tables on Venture Capitalists

Directory of Open Access Journals (Sweden)

Prescott C. Ensign

2016-01-01

Full Text Available This case study chronicles the timeline of a new venture – Keenga Research. Keenga Research has a novel proposition that it is seeking to introduce to the market. The business concept is to ask entrepreneurs to review the venture capital (VC firm that funded them. Reviews of VC firms would then be developed and marketed to those interested (funds and perhaps enterprises seeking funding. What makes this case unique is that Keenga Research was a lean start-up. Bootstrapping is a situation in which the entrepreneur chooses to fund the venture with his/her own personal resources. It involves self-funding (family and friends, tight monitoring of expenses, and maintaining control of ownership and management (Winborg & Landstrom 2001; Perry, Chandler, Yao, & Wolff, 2011; Winborg, 2015. The lean start-up approach favors experimentation over elaborate planning, customer feedback over intuition and iterative design over traditional big upfront research and development. This case study requires the reader to consider a number of the basic challenges facing all entrepreneurs and new ventures. Is the concept marketable? Can the concept be developed and brought to market in a timely manner? Will the product generate revenue? How? When? What are the commitments of the entrepreneurs? Have they considered the major challenges to be faced? Since this venture involved gathering and developing research information and then creating an online platform, Keenga Research faced significant concept-to-market challenges. The research method used in this case study is first person participant observation and interviews. One of the authors was a team member so the contextual details come from direct observation and first-hand knowledge. This method of research is often used in anthropology, sociology, and social psychology where an investigator studies the group by sharing in its activities. The other author provided an objective and conceptual perspective for analyzing

Ion cyclotron resonance heating (ICRH) start-up antenna for the mirror fusion test facility (MFTF-B)

International Nuclear Information System (INIS)

McCarville, T.M.; Romesser, T.E.

1985-01-01

The purpose of the ICRH start-up antenna on MFTF-B is to heat the plasma and control the ion distribution as the density increases during start-up. The antenna, consisting of two center fed half turn loops phased 180 0 apart, has been designed for 1 MW of input power, with a goal of coupling 400 kW into the ions. To vary the heating frequency relative to the local ion cyclotron frequency, the antenna is tunable over a range from 7.5 to 12.5 MHz. The thermal requirements common to low duty cycle ICRH antennas are especially severe for the MFTF-B antenna. The stress requirements are also unique, deriving from the possibility of seismic activity or JxB forces if the magnets unexpectedly quench. Considerable attention has been paid to contact control at high current bolt-up joints, and arranging geometries so as to minimize the possibility of voltage breakdown

COMPLEX SIMULATION MODEL OF TRAIN BREAKING-UP PROCESS AT THE HUMPS

Directory of Open Access Journals (Sweden)

E. B. Demchenko

2015-11-01

Full Text Available Purpose. One of the priorities of station sorting complex functioning improvement is the breaking-up process energy consumptions reduction, namely: fuel consumption for train pushing and electric energy consumption for cut braking. In this regard, an effective solution of the problem of energy consumption reduction at breaking-up subsystem requires a comprehensive handling of train pushing and cut rolling down processes. At the same time, the analysis showed that the current task of pushing process improvement and cut rolling down effectiveness increase are solved separately. To solve this problem it is necessary to develop the complex simulation model of train breaking up process at humps. Methodology. Pushing process simulation was done based on adapted under the shunting conditions traction calculations. In addition, the features of shunting locomotives work at the humps were taken into account. In order to realize the current pushing mode the special algorithm of hump locomotive controlling, which along with the safety shunting operation requirements takes into account behavioral factors associated with engineer control actions was applied. This algorithm provides train smooth acceleration and further movement with speed, which is close to the set speed. Hump locomotive fuel consumptions were determined based on the amount of mechanical work performed by locomotive traction. Findings. The simulation model of train pushing process was developed and combined with existing cut rolling down model. Cut initial velocity is determined during simulation process. The obtained initial velocity is used for further cut rolling process modeling. In addition, the modeling resulted in sufficiently accurate determination of the fuel rates consumed for train breaking-up. Originality. The simulation model of train breaking-up process at the humps, which in contrast to the existing models allows reproducing complexly all the elements of this process in detail

Towards cooperation between European start ups : the position of the French, Dutch, and German entrepreneurial and innovative engineer

OpenAIRE

Ulijn, J.M.; Fayolle, A.

2002-01-01

People who want to start their own business often try to survive or to die again on their own. The very fact that "others", apart from family, friends and fools who invest in their venture, are quickly seen as probable competitors, who want the steal the idea, prevent start ups from cooperation with partners. Setting up a personal network might even cause more risk, since one has to share ideas for technological development of the idea or look for a market for it. The consequence is that with...

45 CFR 309.150 - What start-up costs are allowable for Tribal IV-D programs carried out under § 309.65(b) of this...

Science.gov (United States)

2010-10-01

... 45 Public Welfare 2 2010-10-01 2010-10-01 false What start-up costs are allowable for Tribal IV-D... ENFORCEMENT (IV-D) PROGRAM Tribal IV-D Program Funding § 309.150 What start-up costs are allowable for Tribal... $500,000, unless additional funding is provided pursuant to § 309.16(c). Allowable start-up costs and...

Design of a data-driven predictive controller for start-up process of AMT vehicles.

Science.gov (United States)

Lu, Xiaohui; Chen, Hong; Wang, Ping; Gao, Bingzhao

2011-12-01

In this paper, a data-driven predictive controller is designed for the start-up process of vehicles with automated manual transmissions (AMTs). It is obtained directly from the input-output data of a driveline simulation model constructed by the commercial software AMESim. In order to obtain offset-free control for the reference input, the predictor equation is gained with incremental inputs and outputs. Because of the physical characteristics, the input and output constraints are considered explicitly in the problem formulation. The contradictory requirements of less friction losses and less driveline shock are included in the objective function. The designed controller is tested under nominal conditions and changed conditions. The simulation results show that, during the start-up process, the AMT clutch with the proposed controller works very well, and the process meets the control objectives: fast clutch lockup time, small friction losses, and the preservation of driver comfort, i.e., smooth acceleration of the vehicle. At the same time, the closed-loop system has the ability to reject uncertainties, such as the vehicle mass and road grade.

ORNL TNS program: microwave start-up of tokamak plasmas near electron cyclotron and upper hybrid resonances

International Nuclear Information System (INIS)

Peng, Y.K.M.; Borowski, S.K.

1977-12-01

The scenario of toroidal plasma start-up with microwave initiation and heating near the electron cyclotron frequency is suggested and examined here. We assume microwave irradiation from the high field side and an anomalously large absorption of the extraordinary waves near the upper hybrid resonance. The dominant electron energy losses are assumed to be due to magnetic field curvature and parallel drifts, ionization of neutrals, cooling by ions, and radiation by low Z impurities. It is shown by particle and energy balance considerations that electron temperatures around 250 eV and densities of 10 12 to 10 13 cm -3 can be maintained, at least in a narrow region near the upper hybrid resonance, with modest microwave powers in the Impurity Study Experiment (ISX) (120 kW at 28 GHz) and The Next Step (TNS) (0.57 MW at 120 GHz). The loop voltages required for start-up from these initial plasmas are also estimated. It is shown that the loop voltage can be reduced by a factor of five to ten from that for unassisted start-up without an increase in the resistive loss in volt-seconds. If this reduction in loop voltage is verified in the ISX experiments, substantial savings in the cost of power supplies for the ohmic heating (OH) and equilibrium field (EF) coils can be realized in future large tokamaks

Total dose and dose-rate effects on start-up current in anti-fuse FPGA

International Nuclear Information System (INIS)

Wang, J.; Wong, W.; McCollum, J.; Cronquist, B.; Katz, R.; Kleyner, I.; Kleyner, F.

1999-01-01

Radiation enhanced start-up current (RESC) in an anti-fuse FPGA, A1280A, is thoroughly investigated and a comprehensive transistor-level mechanism is proposed. Low dose-rate testing, appropriate for civilian space applications, and annealing at room temperature shows RESC to be negligible for the lot of parts tested with a fixed power supply slew rate. (authors)

Chapter No.8. Personnel qualification and training

International Nuclear Information System (INIS)

2002-01-01

selected personnel were scheduled according to the plan of examining committee meetings. For each examined person written tests are generated by the computer from the database of test questions at the Training Centre of VUJE Trnava for individual positions - categories of selected staff of NPP V-1 and NPP V-2 Bohunice and NPP Mochovce so that the examination questions both in written and oral part equally cover individual facilities and regimes of operation of NPP. The database is continuously updated, thereby containing new questions resulting from the recent changes carried out at NPP's. A part of the examination in case of promotion to a higher position is the practical part, which is conducted under the direct supervision of the trainer within 4 to 10 weeks after the successful completion of both written and oral of examinations. Last year the committee held ten sessions for the oral theoretical examination. The number of licenses issued in 2001 and the total number of valid licenses is given. Conclusions from inspections and tests as well as results from operation and start up of nuclear units confirm that in this area a high standard of operational safety is being achieved on a permanent basis. Increasing the qualification of UJD staff Increasing the qualification of UJD staff was done in a form of training and courses scheduled in the plan of training for UJD staff for 2001. This training composed of specialised qualification study, functional study, as well as study aimed at maintaining qualification (continual and periodical exercise). Training courses organised by the Government Office of Slovakia and the IAEA were also of a significant benefit and UJD staff participated on foreign training courses, seminars and conferences, focusing on maintaining and improvement of professional skills

Towards cooperation between European start ups : the position of the French, Dutch, and German entrepreneurial and innovative engineer

NARCIS (Netherlands)

Ulijn, J.M.; Fayolle, A.

2002-01-01

People who want to start their own business often try to survive or to die again on their own. The very fact that "others", apart from family, friends and fools who invest in their venture, are quickly seen as probable competitors, who want the steal the idea, prevent start ups from cooperation with

Generating realistic environments for cyber operations development, testing, and training

Science.gov (United States)

Berk, Vincent H.; Gregorio-de Souza, Ian; Murphy, John P.

2012-06-01

Training eective cyber operatives requires realistic network environments that incorporate the structural and social complexities representative of the real world. Network trac generators facilitate repeatable experiments for the development, training and testing of cyber operations. However, current network trac generators, ranging from simple load testers to complex frameworks, fail to capture the realism inherent in actual environments. In order to improve the realism of network trac generated by these systems, it is necessary to quantitatively measure the level of realism in generated trac with respect to the environment being mimicked. We categorize realism measures into statistical, content, and behavioral measurements, and propose various metrics that can be applied at each level to indicate how eectively the generated trac mimics the real world.

Training of personnel for nuclear power in Ceske Energeticke Zavody Concern

International Nuclear Information System (INIS)

Hodny, J.; Krestan, J.

1983-01-01

The projects of training of personnel and recruitment of apprentices have to be started 10 years prior to the commissioning of a nuclear power plant. Training starts three years prior to the physical start-up. The education and training of personnel in the nuclear programme including the implementation of their social background is an equivalent component of nuclear safety. The most important aspects are presented of personnel training with regard to organization, recruitment, theoretical and practical education and training, material and technical provisions and social programme. At present personnel training and the education of specialists have reached a high standard but the problem of social care of personnel in future plants is serious and has not been solved. (M.D.)

TQM Training; The Library Service Challenge.

Science.gov (United States)

Loney, Tim; Bellefontaine, Arnie

1993-01-01

Addresses training in the context of organizing and implementing a Total Quality Management (TQM) initiative. The customer service implications and relevant training or skill implications for the following phases are described: (1) exploration and commitment; (2) organizing for quality; (3) start up; and (4) expansion and integration. (Contains 18…

Timing of international market entry of UK and German high-tech start-ups

OpenAIRE

Bürgel, Oliver; Fier, Andreas; Licht, Georg; Murray, Gordon

2001-01-01

We examine the impact of technological product advantages, prior international experience of the management, firm size and age, country differences, and sunk costs as determinants of the timing of international market entry. The timing of internationalisation is analysed using ?event history analysis? for 600 British and German start-up companies in high-technology industries. The results indicate that the incidence of internationalization increases over time. For the majority of new firms th...

Roads Leading to Self-Employment: Comparing Transgenerational Entrepreneurs and Self-Made Start-Ups

OpenAIRE

Blumberg, Boris; Pfann, Gerard Antonie

2015-01-01

This paper studies the event history of business foundation and distinguishes between transgenerational entrepreneurship and self-made start-ups. Three theoretical concepts of human, financial and social capital are linked to investigate variations over time in the decision process to become self-employed. Data from a cohort of Dutch inhabitants born in 1939/1940 who have been interviewed three times during their lives in 1952, 1983, and 1993 allows testing theoretical hypotheses that state c...

RF start-up and sustainment experiments on the TST-2-K spherical tokamak

International Nuclear Information System (INIS)

Ejiri, A.; Takase, Y.; Kasahara, H.; Yamada, T.; Hanada, K.; Sato, K. N.; Zushi, H.; Nakamura, K.; Sakamoto, M.; Idei, H.; Hasegawa, M.; Iyomasa, A.; Imamura, N.; Esaki, K.; Kitaguchi, M.; Sasaki, K.; Hoshika, H.; Mitarai, O.; Nishino, N.

2006-01-01

Plasma start-up and sustainment without an inductive field have been studied in the TST-2-K spherical tokamak using high power RF sources (8.2 GHz/up to 170 kW). Steady state discharges with a plasma current of 4 kA were achieved. The line integrated density was about 3 x 10 17 m -2 and the electron temperature was 160 eV. A truncated equilibrium was introduced to reproduce magnetic measurements. It was found that a positive Pfirsch-Schlueter current in the open field line region at the outboard boundary makes a significant contribution to the current. Insensitivity of the current to variations in the vertical field and RF power variation was also found

Providing a Home for Start-Ups.

Science.gov (United States)

Hoffman, Carl

2001-01-01

Shoals Entrepreneurial Center, in two Alabama locations, supports would-be entrepreneurs with extensive planning advice, rental space, loans, business training, and back-office infrastructure. The center favors business plans with the potential to create fairly high-paying jobs, a different focus from other businesses in the region, and an…

Start-up flow in a three-dimensional lid-driven cavity by means of a massively parallel direction splitting algorithm

KAUST Repository

Guermond, J. L.

2011-05-04

The purpose of this paper is to validate a new highly parallelizable direction splitting algorithm. The parallelization capabilities of this algorithm are illustrated by providing a highly accurate solution for the start-up flow in a three-dimensional impulsively started lid-driven cavity of aspect ratio 1×1×2 at Reynolds numbers 1000 and 5000. The computations are done in parallel (up to 1024 processors) on adapted grids of up to 2 billion nodes in three space dimensions. Velocity profiles are given at dimensionless times t=4, 8, and 12; at least four digits are expected to be correct at Re=1000. © 2011 John Wiley & Sons, Ltd.

Heart-Rate Recovery After Warm-up in Swimming: A Useful Predictor of Training Heart-Rate Response?

Science.gov (United States)

Ganzevles, Sander P M; de Haan, Arnold; Beek, Peter J; Daanen, Hein A M; Truijens, Martin J

2017-07-01

For training to be optimal, daily training load has to be adapted to the momentary status of the individual athlete, which is often difficult to establish. Therefore, the current study investigated the predictive value of heart-rate recovery (HRR) during a standardized warm-up for training load. Training load was quantified by the variation in heart rate during standardized training in competitive swimmers. Eight female and 5 male Dutch national-level swimmers participated in the study. They all performed 3 sessions consisting of a 300-m warm-up test and a 10 × 100-m training protocol. Both protocols were swum in front crawl at individually standardized velocities derived from an incremental step test. Velocity was related to 75% and 85% heart-rate reserve (% HR res ) for the warm-up and training, respectively. Relative HRR during the first 60 s after the warm-up (HR Rw-up ) and differences between the actual and intended heart rate for the warm-up and the training (ΔHR w-up and ΔHR tr ) were determined. No significant relationship between HRR w-up and ΔHR tr was found (F 1,37 = 2.96, P = .09, R 2 = .07, SEE = 4.65). There was considerable daily variation in ΔHR tr at a given swimming velocity (73-93% HR res ). ΔHR w-up and ΔHR tr were clearly related (F 1,37 = 74.31, P warm-up does not predict heart rate during a directly subsequent and standardized training session. Instead, heart rate during the warm-up protocol seems a promising alternative for coaches to make daily individual-specific adjustments to training programs.

The Analysis and suggested marketing communication for CleanMySpace start-up company

OpenAIRE

Tolstykh, Anastasiia

2016-01-01

This bachelor thesis is focused on the proposal of marketing communication for new start-up company CleanMyPlace, the winner of VŠE Exports 2015, aimed at increase of its brand awareness and improvement of existing marketing strategies and tactics. The theoretical part is devoted to marketing tools, most improtantly to marketing online communication, as soon as this brand provides its services via internet. In the practical part are defined and analysed the current marketing communication. Th...

Astronaut Ronald Evans is suited up for EVA training

Science.gov (United States)

1972-01-01

Astronaut Ronald E. Evans, command module pilot of the Apollo 17 lunar landing mission, is assisted by technicians in suiting up for extravehicular activity (EVA) training in a water tank in bldg 5 at the Manned Spacecraft Center (49970); Evans participates in EVA training in a water tank in bldg 5 at the Manned Spacecraft Center. The structure in the picture simulates the Scientific Instrument Module (SIM) bay of the Apollo 17 Service Module (49971).

Experimental Investigation of Aerodynamic Noise Generated by a Train-Car Gap

Science.gov (United States)

Mizushima, Fumio; Takakura, Hiroyuki; Kurita, Takeshi; Kato, Chisachi; Iida, Akiyoshi

To investigate the mechanism of noise generation by a train-car gap, which is one of a major source of noise in Shinkansen trains, experiments were carried out in a wind tunnel using a 1/5-scale model train. We measured velocity profiles of the boundary layer that approaches the gap and confirmed that the boundary layer is turbulent. We also measured the power spectrum of noise and surface pressure fluctuations around the train-car gap. Peak noise and broadband noise were observed. It is found that strong peak noise is generated when the vortex shedding frequency corresponds to the acoustic resonance frequency determined by the geometrical shape of the gap, and that broadband noise is generated at the downstream edge of the gap where vortexes collide. It is estimated that the convection velocity of the vortices in the gap is approximately 45% of the uniform flow velocity.

Control of a post-combustion CO2 capture plant during process start-up and load variations

DEFF Research Database (Denmark)

Gaspar, Jozsef; Jørgensen, John Bagterp; Fosbøl, Philip Loldrup

2015-01-01

Dynamic and flexible operation of a carbon capture plant is important as thermal power plants must be operated very flexibly to accommodate large shares of intermittent energy sources such as wind and solar energy. To facilitate such operation, dynamic models for simulation, optimization...... and control system design are crucial. In this paper, we present a dynamic mathematical model for the absorption and desorption columns in a carbon capture plant. Moreover, we implement a decentralized proportional-integral (PI) based control scheme and we evaluate the performance of the control structure...... for various operational procedures, e.g. start-up, load changes, noise on the flue gas flow rate and composition. Note that the carbon capture plant is based on the solvent storage configuration. To the authors knowledge, this is the first paper addressing the issue of start-up operation and control of carbon...

Tomography and generative training with quantum Boltzmann machines

Science.gov (United States)

Kieferová, Mária; Wiebe, Nathan

2017-12-01

The promise of quantum neural nets, which utilize quantum effects to model complex data sets, has made their development an aspirational goal for quantum machine learning and quantum computing in general. Here we provide methods of training quantum Boltzmann machines. Our work generalizes existing methods and provides additional approaches for training quantum neural networks that compare favorably to existing methods. We further demonstrate that quantum Boltzmann machines enable a form of partial quantum state tomography that further provides a generative model for the input quantum state. Classical Boltzmann machines are incapable of this. This verifies the long-conjectured connection between tomography and quantum machine learning. Finally, we prove that classical computers cannot simulate our training process in general unless BQP=BPP , provide lower bounds on the complexity of the training procedures and numerically investigate training for small nonstoquastic Hamiltonians.

Starting up microbial enhanced oil recovery.

Science.gov (United States)

Siegert, Michael; Sitte, Jana; Galushko, Alexander; Krüger, Martin

2014-01-01

This chapter gives the reader a practical introduction into microbial enhanced oil recovery (MEOR) including the microbial production of natural gas from oil. Decision makers who consider the use of one of these technologies are provided with the required scientific background as well as with practical advice for upgrading an existing laboratory in order to conduct microbiological experiments. We believe that the conversion of residual oil into natural gas (methane) and the in situ production of biosurfactants are the most promising approaches for MEOR and therefore focus on these topics. Moreover, we give an introduction to the microbiology of oilfields and demonstrate that in situ microorganisms as well as injected cultures can help displace unrecoverable oil in place (OIP). After an initial research phase, the enhanced oil recovery (EOR) manager must decide whether MEOR would be economical. MEOR generally improves oil production but the increment may not justify the investment. Therefore, we provide a brief economical assessment at the end of this chapter. We describe the necessary state-of-the-art scientific equipment to guide EOR managers towards an appropriate MEOR strategy. Because it is inevitable to characterize the microbial community of an oilfield that should be treated using MEOR techniques, we describe three complementary start-up approaches. These are: (i) culturing methods, (ii) the characterization of microbial communities and possible bio-geochemical pathways by using molecular biology methods, and (iii) interfacial tension measurements. In conclusion, we hope that this chapter will facilitate a decision on whether to launch MEOR activities. We also provide an update on relevant literature for experienced MEOR researchers and oilfield operators. Microbiologists will learn about basic principles of interface physics needed to study the impact of microorganisms living on oil droplets. Last but not least, students and technicians trying to understand

Safety improvement of start-up neutron source handling work by preparing new transport containers

International Nuclear Information System (INIS)

Shimazaki, Yosuke; Sawahata, Hiroaki; Yanagida, Yoshinori; Shinohara, Masanori; Kawamoto, Taiki; Takada, Shoji

2016-01-01

The conventional transport containers that have been used in HTTR start-up neutron source replacement work are not specialized type for HTTR start-up neutron source. As the risks associated with the safe handling of neutron source holders due to the above fact, the following three risks have been confirmed: (1) exposure risk due to leakage of neutron source or gamma rays, (2) risk of erroneous fall of neutron source holders, and (3) accident due to incorrect handling of transport containers. This paper reports the risks confirmed in the handling of neutron source holders associated with transport containers and the risk reduction measures, as well as the fabrication of new transport containers. By employing the size-reduction and simple structure, new transport containers have been completed at the same level of costs compared with the continuous use of the conventional transport containers, while satisfying the criteria of Type A transport materials and serving as risk preventive measures. Thus, new transport containers aimed at the risk prevention measures for the handling work of neutron source holders have been completed, and the safety of operation has been improved. (A.O.)

Neighborhood Economic Enterprises: An Analysis, Survey, and Guide to Resources in Starting Up Neighborhood Enterprises.

Science.gov (United States)

Kotler, Neil G.

This pamphlet provides information on the history of and current trends toward neighborhood economic enterprises and provides guidance for setting up such enterprises. A bibliography of books, articles, and newsletters that have information on how to start and sustain neighborhood businesses and cooperatives is provided. Also included is a list of…

Conceptual design of the IFMIF Start-Up monitoring module

Energy Technology Data Exchange (ETDEWEB)

Gouat, Philippe, E-mail: philippe.gouat@sckcen.be [SCK-CEN – The Belgian Nuclear Research Centre, Boeretang 200, B-2400 Mol (Belgium); Leysen, Willem; Goussarov, Andrei; Galledou, Papa Sally [SCK-CEN – The Belgian Nuclear Research Centre, Boeretang 200, B-2400 Mol (Belgium); Rapisarda, David; Mota, Fernando; Garcia, Angela [CIEMAT – Centro de Investigaciones Energéticas, Medioambientales y Tecnológicas, Avda. Complutense 40, 28040 Madrid (Spain)

2013-10-15

Highlights: ► IFMIF test module conceptual design. ► IFMIF test module foreseen instrumentation. ► Cerenkov photon flux monitor. -- Abstract: The preliminary engineering design of the test facilities, including the various test modules to be used in the IFMIF plant is a part of the IFMIF/EVEDA (Engineering Validation and Engineering Design Activities) project from the Broader Approach to fusion. One presents the current status of the conceptual development of the IFMIF Start-Up Monitoring Module, a dedicated device used in the IFMIF test cell during the commissioning phase of the installation, in order to completely characterise the irradiation conditions behind the target on which the beam of deuterons will be focused. This STUMM embarks a lot of instrumentation to precisely characterise the neutron field, the nuclear heating and the temperatures in the test cell. One briefly describes the measuring instruments (including a specific radiation flux monitor under development), the possible layouts and the possible positioning. One also defines which types of measurements are expected by this especially dedicated commissioning module.

Power start up of the Dalat nuclear research reactor; Khoi dong nang luong lo phan ung hat nhan Da Lat

Energy Technology Data Exchange (ETDEWEB)

Hien, Pham Duy; Huy, Ngo Quang; Long, Vu Hai; Mai, Tran Khanh [Nuclear Research Inst., Da Lat (Viet Nam)

1994-10-01

After accomplishing the physical start-up of the reactor, the power start-up was carried out in February 1984. The power of the reactor has reached: 10 KW on 6/2/1984, 100 KW on 7/2/1984, 200 KW and 300 KW on 8/2/1984; 400 KW and nominal power 500 KW on 9/2/1984. The reactivity temperature coefficient and the xenon poisoning were determined. 3 figs., 12 tabs.

Requirements for and prospects of further development of training of personnel for start-up, operation and maintenance of nuclear power plants

International Nuclear Information System (INIS)

Metke, E.

1983-01-01

The results are assessed of the work of training centres and of the training power plant. Since 1979, 1100 persons have undergone training. The planned recruitment quotas have not been fulfilled, the problems being caused by the uneven time distribution of the construction of units of nuclear power plants, the varying quality and number of trainers and tutors; there are problems with simulator training in the USSR. It will be necessary to integrate existing training capacity for all categories of nuclear power plant personnel in one organization unit. (M.D.)

Innovating Training through Immersive Environments: Generation Y, Exploratory Learning, and Serious Games

Science.gov (United States)

Gendron, Gerald

2012-01-01

Over the next decade, those entering Service and Joint Staff positions within the military will come from a different generation than the current leadership. They will come from Generation Y and have differing preferences for learning. Immersive learning environments like serious games and virtual world initiatives can complement traditional training methods to provide a better overall training program for staffs. Generation Y members desire learning methods which are relevant and interactive, regardless of whether they are delivered over the internet or in person. This paper focuses on a project undertaken to assess alternative training methods to teach special operations staffs. It provides a summary of the needs analysis used to consider alternatives and to better posture the Department of Defense for future training development.

Canadian biotechnology start-ups, 1991-1997: the role of incumbents' patents and strategic alliances in controlling competition.

Science.gov (United States)

Calabrese, T; Baum, J A; Silverman, B S

2000-12-01

Fligstein (1996) contends that organizations act to exploit the institutional context in which they are embedded so as to stabilize the competition they face. Drawing on Fligstein's theoretical analysis, we conceptualize incumbent biotechnology firms' patent-ing and alliance-building activities as attempts to stabilize and control potential competition and analyze how these activities shape rates of founding in the Canadian biotechnology industry. We find that increases in the level and concentration of incumbents' patenting discourage founding, particularly in human application sectors of the industry where development and approval processes are more costly and time consuming. Incumbents' horizontal alliances depress start-ups; vertical alliances stimulate start-ups. Our findings highlight how technology appropriation and strategic alliances structure the competitive dynamics and evolution of high-technology, knowledge-intensive industries.

Plasma-wall Interaction Studies in the Start-up Phase of TJ-II

International Nuclear Information System (INIS)

De la Cal, E.; Tabares, F.L.; Tafalla, D.

1998-01-01

The aim of this work is to present some first plasma-wall interaction studies made during the first experimental campaign of TJ-II. The different sections contain independent contributions presented orally in the fusion division of the Euratom-Ciemat association during 1998: I. Density limit during the start-up phase of TJ-II : are we limited by radiation?. II. Temporal evolution of oxygen in the plasma during an experimental day. III. The contribution of helium to the plasma electron density IV. First studies of the S.O.L. diffusion coefficient and its dependence with the boundary plasma parameters. (Author) 3 refs

Device for starting a steam generator by heating sodium in a reactor

International Nuclear Information System (INIS)

Nakano, Hisao.

1975-01-01

Object: To enhance cooperation between ventilation and steam conditions of turbine and ventilation condition relative to a superheater at the time of starting a plant using a fast breeder, and to enhance safety with respect to failure of heat transmission tubes at the time of start. Structure: In a device in which steam generated in an evaporator is fed to a high pressure turbine through a super-heater and an outlet steam of high pressure turbine is reheated by means of a re-heater and fed into a turbine on the side of low pressure to drive the turbine for power generation, opening and closing valves are mounted on outlet and inlet pipes, respectively, of the heat transmission pipe in the super heater, said outlet and inlet pipes being connected by a bypass pipe. Upstream side of the opening and closing valve on the inlet pipe and the downstream side of the opening and closing valve on the outlet pipe and connected by a bypass pipe in the re-heater and said bypass pipe in the re-heater is provided with a steam heat exchanger to be heated by steam in the outlet of the superheater, and a steam line in an auxiliary boiler is connected to the side of re-heater from the opening and closing valve on the heat transmission pipe in the re-heater. (Hanada, M.)

Accelerated formation of hydrogen-producing granules for the start-up of UASB reactors using vinasses

Directory of Open Access Journals (Sweden)

César González-Ugalde

2014-02-01

Full Text Available Hydrogen-producing granules formation was studied in a CSTR. The aim of this process is to later transfer the mixed liquor to a UASB reactor to reduce its start-up period. Vinasses from a national bioetha­nol-producing industry (from sugar cane were used as substrate and their anaerobic fermentation was carried out under mesophilic conditions. The seed sludge was collected from an UASB reactor oper­ated in an industrial wastewater treatment plant and it was heat treated to inactivate methanogenic bacteria. Total viable and non-viable material growth curves were generated and it was determined that the exponential growth phase of the thermally pre­treated mixed culture was between 20 and 120 h. Finally, the anaerobic fermentation of the vinasses in batch mode for 70 hours, and then in continuous CSTR mode for 7 days, showed to be an effective method for accelerating the formation of hydrogen-producing granules. Using this method, granules with an average size of 1.24 mm were achieved. The good efficiency of the process is attributed to high mass transfer in the CSTR reactor.

SIPA: A new generation of nuclear power plant simulators for post-accident training and studies

Energy Technology Data Exchange (ETDEWEB)

Agator, J M [CEA/IPSN, Fontenay-aux-Roses (France); Chaze, J L; Sekri, A [Electricite de France - EDF/SEPTEN and EDF/SPT, Villeurbanne (France)

1990-07-01

SIPA is a real time 'simulator', now under development, describing PWR behaviour under normal or accidental conditions. Its objectives are Shift Safety Advisors (SSA) training, studies and safety analysis. Its software workshop will allow flexibility and portability. The primary circuit is described by CATHARE-SIMU, a speeded-up version of the French advanced code CATHARE, and will be completed by about 35 connected systems. Most of these models are developed using automatic code generators. To achieve the objectives of both training and studies, the man-machine interface will be constituted by workstations using graphics software. For the training of SSA, a 'pedagogic system' will be used. The computational power will be supplied by a CRAY processor linked to a 'training network' and an 'engineering network'. SIPA softwares are developed by THOMSON-CSF and SEMA-GROUP FRANCE and the commissioning of the EDF version, called SIPA 1, and of the CEA version, called SIPA 2, is planned in 1991. (author)

Critical Learning Episodes In The Evolution Of Business Start-Ups: Business Incubators In South-Eastern Brazil

NARCIS (Netherlands)

A.A. Corradi (Ariane Agnes)

2013-01-01

textabstractThis study investigates the evolution of business start-ups in the first three to five years. Evolution is defined here as a non-continuous learning process of entrepreneurs that creates and changes organizational routines. Two concepts are central: critical learning episodes and

Critical learning episodes in the evolution of Brazilian business start-ups: a theoretical and analytical tool

NARCIS (Netherlands)

A.A. Corradi (Ariane Agnes)

2013-01-01

textabstractThis study investigates critical learning episodes as landmarks in the evolution of business start-ups. A framework that combines individual learning processes with the Penrosian resource-based theory of the firm, and the concepts of search and routines from evolutionary economics

Quick-start of full-scale anaerobic digestion (AD) using aeration

Energy Technology Data Exchange (ETDEWEB)

Lagerkvist, Anders, E-mail: al@ltu.se; Pelkonen, Markku; Wikström, Tommy

2015-04-15

Highlights: • A fast, and original, start up procedure for anaerobic digestors has been applied at full scale. • The development of a methanogenic culture has been documented using fluorescent in situ hybridization. • The technique can be widely applied. - Abstract: A conventional 1300 m{sup 3} continuously stirred anaerobic tank reactor at the city of Boden, north Sweden, which was receiving a feed of both sewage sludge and food waste, was put out of operation due to the build-up of a float phase. The reactor was emptied and cleaned. At start-up there was no methanogenic sludge available, so an unconventional start-up procedure was applied: The reactor was rapidly (8 days with 1200 kg of total solids (TS) added daily) filled with thickened, and slightly acidic sewage sludge, showing only slight methane generation, which was subsequently heated to 55 °C. Then compressed air was blown into the digester and within a month a fully functional methanogenic culture was established. The transfer from acidogenic to methanogenic conditions happened in about one week. As a start-up technique this is fast and cost efficient, it only requires the access of a compressor, electricity and a source of air. In total, about 16 tonnes of oxygen were used. It is proposed that this method may also be used as an operational amendment technique, should a reactor tend to acidify.

Quick-start of full-scale anaerobic digestion (AD) using aeration

International Nuclear Information System (INIS)

Lagerkvist, Anders; Pelkonen, Markku; Wikström, Tommy

2015-01-01

Highlights: • A fast, and original, start up procedure for anaerobic digestors has been applied at full scale. • The development of a methanogenic culture has been documented using fluorescent in situ hybridization. • The technique can be widely applied. - Abstract: A conventional 1300 m 3 continuously stirred anaerobic tank reactor at the city of Boden, north Sweden, which was receiving a feed of both sewage sludge and food waste, was put out of operation due to the build-up of a float phase. The reactor was emptied and cleaned. At start-up there was no methanogenic sludge available, so an unconventional start-up procedure was applied: The reactor was rapidly (8 days with 1200 kg of total solids (TS) added daily) filled with thickened, and slightly acidic sewage sludge, showing only slight methane generation, which was subsequently heated to 55 °C. Then compressed air was blown into the digester and within a month a fully functional methanogenic culture was established. The transfer from acidogenic to methanogenic conditions happened in about one week. As a start-up technique this is fast and cost efficient, it only requires the access of a compressor, electricity and a source of air. In total, about 16 tonnes of oxygen were used. It is proposed that this method may also be used as an operational amendment technique, should a reactor tend to acidify

Commissioning and start-up of RA-8 critical assembly

International Nuclear Information System (INIS)

Lorenzo, N. de; Diaz, C.; Facchini, G.; Fernandez, C.; Fittipaldi, A.; Juracich, R.; Levanon, I.; Manceda, J.; Martinez, J.; Mogdan, R.; Perez, J.; Scarnichia, E.; Blaumann, H.; Gennuso, G.; Scotti, G.

1999-01-01

The RA-8 critical assembly was designed as one of the experimental facilities for the CAREM Reactor Project. This paper describes the activities developed during the cold and hot commissioning, pointing out the difficulties and the solutions applied (some of them original ones). Moreover, this paper will show the main features of the newest nuclear installation of CNEA making a brief description of its characteristics. Among the special circumstances related to the commissioning that are described in the paper we can mention the following: 1. The facility shares the building with the Thermohydraulic Assay Laboratory (L.E.T.), another experimental facility of CAREM, and thus some shared systems have already been working for many years before this start up. Special procedures for these systems were designed to verify the proper functioning under the new requirements. 2. A new driving mechanism, based in hydraulic cylinders, was used to move the control rods. The criteria for acceptance and a validation of the procedure completeness have been carried out. 3. The implementation of a power measurement system based in neutron noise. 4. Measurement of Power Distribution using direct gamma counting from the fuel elements. 5. The commissioning was interrupted for a ten-month period because the personnel involved had to carry out the commissioning of the Egyptian Research Reactor 2. Also, the common activities during a commissioning are described, pointing out the major steps carried out and the results obtained. The following are examples of these activities: 1. Environmental dose survey (before fuel loading and during other stages). 2. Test of equipment and systems isolated from the rest of the plant. 3. Integrated system test (two or more systems working at the same time). 4. Start-up and power operation simulations before fuel loading. 5. Fuel loading strategy during the approximation to criticality by mass. 6. Modification of systems' components to improve the

The Perfect Pairing: The Adult Learner and the Boutique Winery in the Start-Up Phase

Science.gov (United States)

Heath-Simpson, Delta F.

2011-01-01

The purpose of this phenomenological study was to understand and describe the lived experiences of adult learners who are owners and managers of small winery businesses operating in the start-up phase of the organizational life cycle. The study explored and identified the meaning of adult learning in the entrepreneurial context and its affect on…

Adapting Training to Meet the Preferred Learning Styles of Different Generations

Science.gov (United States)

Urick, Michael

2017-01-01

This article considers how training professionals can respond to differences in training preferences between generational groups. It adopts two methods. First, it surveys the existing research and finds generally that preferences for training approaches can differ between groups and specifically that younger employees are perceived to leverage…

Up-regulation of reciprocal inhibition by explosive strength training

DEFF Research Database (Denmark)

Geertsen, Svend Sparre; Jensen, Jesper Lundbye; Nielsen, Jens Bo

of 26 ± 7 years strength trained the ankle dorsiflexor muscles 3 times a week for 4 weeks. Each training session consisted of 4 sets of 16 isometric dorsiflexions with the aim of increasing force as rapidly as possible, separated by 4min rest periods. Test sessions were conducted before, immediately...... in the ankle plantarflexors at the onset of dorsiflexion is larger the quicker the movement, we hypothesized that DRI may be up-regulated when subjects are trained to perform dorsiflexion movements as quickly as possible.   For this purpose, 15 healthy human subjects (7 male, 8 female) with an average age...... after and 2 weeks after the training period. The rate of dorsiflexion force development measured within 30, 50, 100 and 200ms after onset of voluntary explosive isometric dorsiflexion increased by 20-30% (p

THE TRAINING OF NEXT GENERATION DATA SCIENTISTS IN BIOMEDICINE.

Science.gov (United States)

Garmire, Lana X; Gliske, Stephen; Nguyen, Quynh C; Chen, Jonathan H; Nemati, Shamim; VAN Horn, John D; Moore, Jason H; Shreffler, Carol; Dunn, Michelle

2017-01-01

With the booming of new technologies, biomedical science has transformed into digitalized, data intensive science. Massive amount of data need to be analyzed and interpreted, demand a complete pipeline to train next generation data scientists. To meet this need, the transinstitutional Big Data to Knowledge (BD2K) Initiative has been implemented since 2014, complementing other NIH institutional efforts. In this report, we give an overview the BD2K K01 mentored scientist career awards, which have demonstrated early success. We address the specific trainings needed in representative data science areas, in order to make the next generation of data scientists in biomedicine.

How to Green the red Dragon : A Start-ups' Little Helper for Sustainable Development in China

NARCIS (Netherlands)

Steinz, Henk J.; Van Rijnsoever, Frank J.; Nauta, Frans

2016-01-01

This article qualitatively identifies and explains the barriers that foreign cleantech start-ups can encounter when attempting to enter the Chinese market, as well as the possible strategies that can help overcome these barriers. We base our analysis on interviews with Chinese and foreign

Calibration and Measurement of the Viscosity of DWPF Start-Up Glass

International Nuclear Information System (INIS)

Schumacher, R.F.

2001-01-01

The Harrop, High-Temperature Viscometer has been in operation at the Savannah River Technology Center (SRTC) for several years and has proven itself to be reasonably accurate and repeatable. This is particularly notable when taking into consideration the small amount of glass required to make the viscosity determination. The volume of glass required is only 2.60 cc or about 6 to 7 grams of glass depending on the glass density. This may be compared to the more traditional viscosity determinations, which generally require between 100 to 1000 grams of glass. Before starting the present investigation, the unit was re-aligned and the furnace thermal gradients measured. The viscometer was again calibrated with available NIST Standard Reference Material glasses (717a and 710a) and a spindle constant equation was determined. Standard DWPF Waste Compliance Glasses (Purex, HM, and Batch 1) were used to provide additional verification for the determinations at low temperature. The Harrop, High-Temperature Viscometer was then used to determine the viscosity of three random samples of ground and blended DWPF, Black, Start -Up Frit, which were obtained from Pacific Northwest National Laboratory (PNNL). The glasses were in powder form and required melting prior to the viscosity determination. The results from this evaluation will be compared to ''Round Robin'' measurements from other DOE laboratories and a number of commercial laboratories

Twenty years from the start-up of A-1, the first Czechoslovak nuclear power plant

International Nuclear Information System (INIS)

Komarek, A.

1992-01-01

On the occasion of the 20th anniversary of the start-up of A-1, the first Czechoslovak nuclear power plant, some less widely known data concerning the background of its development and construction, its importance for Czechoslovak engineering, and some conclusions for the future development of the Czechoslovak power industry are presented. (author) 3 figs

Parameters matching requirements for diesel free piston linear alternator start-up

Directory of Open Access Journals (Sweden)

Yan-xiao Li

2015-03-01

Full Text Available It is important to identify the relationship between the starting requirements and the structure parameters of the diesel free piston linear alternator on the structural design stage. In this article, the forces applied on the moving part during the starting process are analyzed, and an oscillation model is established. The numerical simulation results of the oscillation model are presented, and the energy-transfer mechanism is analyzed. Then, the oscillation model is simplified by utilizing the energy balance theory. Expressions of the achieved starting frequency and required starting force are derived and the effects of different design variables on them are investigated. The results show that the achieved compression ratio is determined by the energy balance between the friction consumption and the energy supplied by the starting force. The starting frequency achieved and starting force required are associated with the cylinder bore, the moving mass, and effective stroke of the engine, which can be applied to the matching design and optimization of the prototype.

Starting of nuclear power stations

International Nuclear Information System (INIS)

Kotyza, V.

1988-01-01

The procedure is briefly characterized of jobs in nuclear power plant start-up and the differences are pointed out from those used in conventional power generation. Pressure tests are described oriented to tightness, tests of the secondary circuit and of the individual nodes and facilities. The possibility is shown of increased efficiency of such jobs on an example of the hydraulic tests of the second unit of the Dukovany nuclear power plant where the second and the third stages were combined in the so-colled integrated hydraulic test. (Z.M.). 5 figs

Cooperation and teamwork in technology start-ups : reflected in some Italian, British, Dutch and German findings

NARCIS (Netherlands)

Ulijn, J.M.; Aaltio, I.; Guerra, G.; Uhlaner, L.M.

2011-01-01

Cooperation and teamwork is often a challenge for technology start-ups. Cooperation is usually needed in order to combine the variety of expertise and it requires trust between partners. The idea of national locality is changing in European enterprises because of the new shared markets and

Lithium Hideout and Return in the CANDU Heat Transport System during Shutdown and Start-up

International Nuclear Information System (INIS)

Qiu, L.; Snaglewski, A.P.

2012-09-01

Lithium hydroxide is used to control the pH a (pH apparent) of the Heat Transport System (HTS) coolant in CANDU R reactors. The recommended range of the lithium concentration in the coolant is between 0.38 ppm (5.5x10 -5 m) and 0.60 ppm (8.7x10 -5 m) to minimize carbon steel corrosion in the HTS and magnetite deposition in the core during normal operation; this corresponds to pH a values between 10.2 and 10.4. Similar pH a and lithium concentrations should be maintained during shutdown and start-up. However, maintaining the pH a of the HTS coolant within specification during shutdown and start-up has been difficult for some CANDU stations, especially when the HTS is taken to a Low Level Drain State (LLDS), because of lithium hideout and return. This paper presents the results from lithium adsorption and desorption studies on iron oxides under relevant shutdown and start-up chemistry conditions performed to elucidate the mechanisms of the observed lithium hideout and return. The results show that lithium hideout and return are driven largely by changes in the solubility of magnetite as the HTS coolant chemistry changes during shutdown; changes in lithium concentration were inversely correlated with the solubility of magnetite. When the HTS system is de-pressurized and drained to a low coolant level, the ingress of air rapidly oxidizes the dissolved Fe (II) in the coolant, 2Fe +2 + 1 / 2 O 2 + 3 H 2 = 2FEOOH + 4 H + , resulting in the formation of lepidocrocite or maghemite, which have much lower solubilities but larger surface areas than does magnetite. The large surface area of the Fe (III) oxides can adsorb significant quantities of lithium from the coolant, leading to lithium hideout and a pH a decrease. During start-up, the chemistry of the coolant changes from oxidizing to reducing, and lepidocrocite and other Fe (III) oxides are reduced to Fe (II), gradually dissolving as their solubility increases with increasing temperature. The adsorbed lithium is released

Precharge strategies for isolated modular DC-DC converters under two different start-up conditions

DEFF Research Database (Denmark)

Zhang, Yi; Wang, Huai; Li, Binbin

2017-01-01

The isolated modular DC-DC converter (IMDCC) is a new topology designed to connect high-voltage direct current (HVDC) lines with different voltage levels, which ties two DC grids by using two modular multilevel converters (MMCs) via a medium-frequency transformer. Due to the large value of capaci......The isolated modular DC-DC converter (IMDCC) is a new topology designed to connect high-voltage direct current (HVDC) lines with different voltage levels, which ties two DC grids by using two modular multilevel converters (MMCs) via a medium-frequency transformer. Due to the large value...... of capacitance in the IMDCC, proper precharge strategies before the start-up are significant for the safety and reliability of the whole system. This paper presents two closed-loop precharge control strategies to fully charge the sub-module (SM) capacitors of the IMDCC, considering two different start...

Experimental Study on the Thermal Start-Up Performance of the Graphene/Water Nanofluid-Enhanced Solar Gravity Heat Pipe.

Science.gov (United States)

Zhao, Shanguo; Xu, Guoying; Wang, Ning; Zhang, Xiaosong

2018-01-28

The solar gravity heat pipe has been widely used for solar thermal water heating because of its high efficient heat transfer and thermal diode characteristics. Operated on fluctuant and low intensity solar radiation conditions, a solar gravity heat pipe may frequently start up. This severely affects its solar collection performance. To enhance the thermal performance of the solar gravity heat pipe, this study proposes using graphene/water nanofluid as the working fluid instead of deionized water. The stability of the prepared graphene/water nanofluid added with PVP was firstly investigated to obtain the optimum mass ratios of the added dispersant. Thermophysical properties-including the thermal conductivity and viscosity-of nanofluid with various graphene nanoplatelets (GNPs) concentrations were measured at different temperatures for further analysis. Furthermore, based on the operational evaluation on a single heat pipe's start-up process, the performance of nanofluid-enhanced solar gravity heat pipes using different concentrations of GNPs were compared by using water heating experiments. Results indicated that the use of 0.05 wt % graphene/water nanofluid instead of water could achieve a 15.1% and 10.7% reduction in start-up time under 30 and 60 W input heating conditions, respectively. Consequently, a higher thermal efficiency for solar collection could be expected.

Experimental Study on the Thermal Start-Up Performance of the Graphene/Water Nanofluid-Enhanced Solar Gravity Heat Pipe

Science.gov (United States)

Zhao, Shanguo; Xu, Guoying; Wang, Ning; Zhang, Xiaosong

2018-01-01

The solar gravity heat pipe has been widely used for solar thermal water heating because of its high efficient heat transfer and thermal diode characteristics. Operated on fluctuant and low intensity solar radiation conditions, a solar gravity heat pipe may frequently start up. This severely affects its solar collection performance. To enhance the thermal performance of the solar gravity heat pipe, this study proposes using graphene/water nanofluid as the working fluid instead of deionized water. The stability of the prepared graphene/water nanofluid added with PVP was firstly investigated to obtain the optimum mass ratios of the added dispersant. Thermophysical properties—including the thermal conductivity and viscosity—of nanofluid with various graphene nanoplatelets (GNPs) concentrations were measured at different temperatures for further analysis. Furthermore, based on the operational evaluation on a single heat pipe’s start-up process, the performance of nanofluid-enhanced solar gravity heat pipes using different concentrations of GNPs were compared by using water heating experiments. Results indicated that the use of 0.05 wt % graphene/water nanofluid instead of water could achieve a 15.1% and 10.7% reduction in start-up time under 30 and 60 W input heating conditions, respectively. Consequently, a higher thermal efficiency for solar collection could be expected. PMID:29382094

Experimental Study on the Thermal Start-Up Performance of the Graphene/Water Nanofluid-Enhanced Solar Gravity Heat Pipe

Directory of Open Access Journals (Sweden)

Shanguo Zhao

2018-01-01

Full Text Available The solar gravity heat pipe has been widely used for solar thermal water heating because of its high efficient heat transfer and thermal diode characteristics. Operated on fluctuant and low intensity solar radiation conditions, a solar gravity heat pipe may frequently start up. This severely affects its solar collection performance. To enhance the thermal performance of the solar gravity heat pipe, this study proposes using graphene/water nanofluid as the working fluid instead of deionized water. The stability of the prepared graphene/water nanofluid added with PVP was firstly investigated to obtain the optimum mass ratios of the added dispersant. Thermophysical properties—including the thermal conductivity and viscosity—of nanofluid with various graphene nanoplatelets (GNPs concentrations were measured at different temperatures for further analysis. Furthermore, based on the operational evaluation on a single heat pipe’s start-up process, the performance of nanofluid-enhanced solar gravity heat pipes using different concentrations of GNPs were compared by using water heating experiments. Results indicated that the use of 0.05 wt % graphene/water nanofluid instead of water could achieve a 15.1% and 10.7% reduction in start-up time under 30 and 60 W input heating conditions, respectively. Consequently, a higher thermal efficiency for solar collection could be expected.

How Much Weight to Use During Strength Training Activities

Science.gov (United States)

Many women want to start a strength training routine but aren’t sure how much weight to use. Start with resistance bands, soup cans, or light weights (1 to 3 pounds) and build up to tighter bands or heavier weights as you feel and become stronger.

A neural network driving curve generation method for the heavy-haul train

Directory of Open Access Journals (Sweden)

Youneng Huang

2016-05-01

Full Text Available The heavy-haul train has a series of characteristics, such as the locomotive traction properties, the longer length of train, and the nonlinear train pipe pressure during train braking. When the train is running on a continuous long and steep downgrade railway line, the safety of the train is ensured by cycle braking, which puts high demands on the driving skills of the driver. In this article, a driving curve generation method for the heavy-haul train based on a neural network is proposed. First, in order to describe the nonlinear characteristics of train braking, the neural network model is constructed and trained by practical driving data. In the neural network model, various nonlinear neurons are interconnected to work for information processing and transmission. The target value of train braking pressure reduction and release time is achieved by modeling the braking process. The equation of train motion is computed to obtain the driving curve. Finally, in four typical operation scenarios, comparing the curve data generated by the method with corresponding practical data of the Shuohuang heavy-haul railway line, the results show that the method is effective.

Effect of calcium on microbial aggregation during UASB reactor start-up

Energy Technology Data Exchange (ETDEWEB)

Mahoney, E.M.; Varangu, L.K.; Cairns, W.L.; Kosaric, N.; Murray, R.G.E.

1987-01-01

The dynamics of granule formation were studied using cells from two bench-scale UASB reactors. The objective was to elucidate factors which influence formation and maintenance of highly active self-agglomerated microbial biomass. Simultaneous examination of biological and physical parameters was performed during the start-up of a calcium-positive (100 mg/l) reactor and a reactor without added calcium. The influence of carbon nutrients and Ca++ on the cell surface and microbial aggregation was studied. The granules formed in both reactors but were larger in the calcium-positive reactor in which they settled 3-4 times faster. A higher rate of biomass accumulation also was evident in the calcium-positive reactor and this allowed a more frequent increase in the substrate loading rate and earlier development of the granular sludge. (Refs. 17).

How network-based incubation helps start-up performance : a systematic review against the background of management theories

NARCIS (Netherlands)

Eveleens, Chris P.|info:eu-repo/dai/nl/369284704; van Rijnsoever, Frank J.|info:eu-repo/dai/nl/314100334; Niesten, Eva M M I

2017-01-01

The literature on how network-based incubation influences the performance of technology-based start-ups has recently grown considerably and provided valuable insights. However, at the same time this literature has become quite fragmented, inconsistently conceptualised, and theoretically

A novel induction motor starting method using superconduction

International Nuclear Information System (INIS)

Silva, F.B.B.; Orlando, M.T.D.; Fardin, J.F.; Simonetti, D.S.; Baldan, C.A.

2014-01-01

Highlights: • Alternative method for starting up induction motor. • Based on using a high-temperature superconductor. • A prototype of the limiter was constructed with a 2G-YBCO tape. • Prototype was tested with a 55-kW industrial induction motor in a 440-V/60-Hz. • Offers reduced current waveform distortion compared to the soft starter method. - Abstract: In this paper, an alternative method for starting up induction motors is proposed, taking into account experimental measurements. The new starting current limitation method is based on using a high-temperature superconductor. A prototype of the superconducting starting current limiter was constructed with a commercially available second-generation high-temperature superconductor YBCO tape, and this was tested with a 55-kW industrial induction motor in a 440-V/60-Hz three-phase power grid. Performance evaluations of the superconducting limiter method (applied to startup of the induction motor) were performed and were compared with a direct-on-line starter and an electronic soft starter. In addition, a computational model was developed and used for electromagnetic torque analysis of the system. As significant characteristics, our method offers the ability to limit the starting current of the induction motor with greater electromagnetic torque, reduced current waveform distortion and therefore lower harmonic pollution during startup when compared to the soft starter method

A novel induction motor starting method using superconduction

Energy Technology Data Exchange (ETDEWEB)

Silva, F.B.B., E-mail: flaviobarcelos@ifes.edu.br [Ifes – Federal Institute of Espírito Santo, Dept. of Industrial Automation, Serra, ES 29173087 (Brazil); UFES – Federal University of Espírito Santo, Dept. of Electrical Engineering, Vitória, ES (Brazil); Orlando, M.T.D. [UFES – Federal University of Espírito Santo, Dept. of Physics, Vitória, ES (Brazil); Fardin, J.F.; Simonetti, D.S. [UFES – Federal University of Espírito Santo, Dept. of Electrical Engineering, Vitória, ES (Brazil); Baldan, C.A. [EEL/USP – Engineering School from Lorena/University of São Paulo, SP (Brazil)

2014-12-15

Highlights: • Alternative method for starting up induction motor. • Based on using a high-temperature superconductor. • A prototype of the limiter was constructed with a 2G-YBCO tape. • Prototype was tested with a 55-kW industrial induction motor in a 440-V/60-Hz. • Offers reduced current waveform distortion compared to the soft starter method. - Abstract: In this paper, an alternative method for starting up induction motors is proposed, taking into account experimental measurements. The new starting current limitation method is based on using a high-temperature superconductor. A prototype of the superconducting starting current limiter was constructed with a commercially available second-generation high-temperature superconductor YBCO tape, and this was tested with a 55-kW industrial induction motor in a 440-V/60-Hz three-phase power grid. Performance evaluations of the superconducting limiter method (applied to startup of the induction motor) were performed and were compared with a direct-on-line starter and an electronic soft starter. In addition, a computational model was developed and used for electromagnetic torque analysis of the system. As significant characteristics, our method offers the ability to limit the starting current of the induction motor with greater electromagnetic torque, reduced current waveform distortion and therefore lower harmonic pollution during startup when compared to the soft starter method.

The Generative Process of Professional and Personal Development of Cognitive-Behavioural Clinical Psychologists in Training through the Inclusion of Strategies of Expressive Arts: A Qualitative Analysis and Comparison

Directory of Open Access Journals (Sweden)

Rosangela Bertelli

2017-08-01

Full Text Available Starting out from the perspective that art is in fact a process and not simply the creation of objects neither the creation’s final products, the present article reports a qualitative analysis, examination and comparison of the subjective nature of the generative process experienced with the inclusion of strategies of expressive arts, described and interpreted by two cognitive-behavioural clinical psychologists in training, both knowledgeable of the principles of cognitive-behavioural model of learning. Does the nature of the psychologists in training subjective experiences with the inclusion of strategies of expressive arts, as reported during their training of professional and personal development, share features and effects? Results revealed similar generative processes guiding towards the development of abilities to focus on the identification and contemplation of automatic thoughts. Such abilities facilitated the grasping of the mechanics of the cognitive-behavioural intervention and also triggered a beneficial sense of well-being during the course of training.

Pre-commissioning, commissioning, start-up and operation of a major extension to an LNG manufacturing facility in Bintulu, Sarawak

International Nuclear Information System (INIS)

Wong, T.

1997-01-01

In 1989, a decision was taken by the Shareholders of Malaysia LNG Sdn Bhd (MLNG) to expand their existing LNG manufacturing facility of some 8.0 million tonnes per annum, and to minimise the capital investment by maximizing the use of available off-plot facilities and utilities, together with the introduction of proven technological enhancements. Accordingly a new Company (MLNG Dua) was set up to own and manage this project and joint venture between existing shareholders. This paper describes the organisation, planning, and execution of the precommissioning, commissioning, start-up, and operation of the off-plot facilities, integrated utilities, and the first new process module, such that on-grade LNG rundown into MLNG's existing storage capacity was achieved within 26 days of the process module being signed off as Ready for Start-up (RFSU). (au)

Exercise training starting at weaning age preserves cardiac pacemaker function in adulthood of diet-induced obese rats.

Science.gov (United States)

Carvalho de Lima, Daniel; Guimarães, Juliana Bohnen; Rodovalho, Gisele Vieira; Silveira, Simonton Andrade; Haibara, Andrea Siqueira; Coimbra, Cândido Celso

2014-08-01

Peripheral sympathetic overdrive in young obese subjects contributes to further aggravation of insulin resistance, diabetes, and hypertension, thus inducing worsening clinical conditions in adulthood. Exercise training has been considered a strategy to repair obesity autonomic dysfunction, thereby reducing the cardiometabolic risk. Therefore, the aim of this study was to assess the effect of early exercise training, starting immediately after weaning, on cardiac autonomic control in diet-induced obese rats. Male Wistar rats (weaning) were divided into four groups: (i) a control group (n = 6); (ii) an exercise-trained control group (n = 6); (iii) a diet-induced obesity group (n = 6); and (iv) an exercise-trained diet-induced obesity group (n = 6). The development of obesity was induced by 9 weeks of palatable diet intake, and the training program was implemented in a motor-driven treadmill (5 times per week) during the same period. After this period, animals were submitted to vein and artery catheter implantation to assess cardiac autonomic balance by methylatropine (3 mg/kg) and propranolol (4 mg/kg) administration. Exercise training increased running performance in both groups (p Exercise training also prevented the increased resting heart rate in obese rats, which seemed to be related to cardiac pacemaker activity preservation (p exercise program beginning at weaning age prevents cardiovascular dysfunction in obese rats, indicating that exercise training may be used as a nonpharmacological therapeutic strategy for the treatment of cardiometabolic diseases.

A Start-up Calibration Method for Generic Current-Steering D/A Converters with Optimal Area Solution