WorldWideScience

Sample records for generation non-particulate dry

  1. Next Generation Non-particulate Dry Nonwoven Pad for Chemical Warfare Agent Decontamination

    Energy Technology Data Exchange (ETDEWEB)

    Ramkumar, S S; Love, A; Sata, U R; Koester, C J; Smith, W J; Keating, G A; Hobbs, L; Cox, S B; Lagna, W M; Kendall, R J

    2008-05-01

    New, non-particulate decontamination materials promise to reduce both military and civilian casualties by enabling individuals to decontaminate themselves and their equipment within minutes of exposure to chemical warfare agents or other toxic materials. One of the most promising new materials has been developed using a needlepunching nonwoven process to construct a novel and non-particulate composite fabric of multiple layers, including an inner layer of activated carbon fabric, which is well-suited for the decontamination of both personnel and equipment. This paper describes the development of a composite nonwoven pad and compares efficacy test results for this pad with results from testing other decontamination systems. The efficacy of the dry nonwoven fabric pad was demonstrated specifically for decontamination of the chemical warfare blister agent bis(2-chloroethyl)sulfide (H or sulfur mustard). GC/MS results indicate that the composite fabric was capable of significantly reducing the vapor hazard from mustard liquid absorbed into the nonwoven dry fabric pad. The mustard adsorption efficiency of the nonwoven pad was significantly higher than particulate activated carbon (p=0.041) and was similar to the currently fielded US military M291 kit (p=0.952). The nonwoven pad has several advantages over other materials, especially its non-particulate, yet flexible, construction. This composite fabric was also shown to be chemically compatible with potential toxic and hazardous liquids, which span a range of hydrophilic and hydrophobic chemicals, including a concentrated acid, an organic solvent and a mild oxidant, bleach.

  2. Dry phase reactor for generating medical isotopes

    Science.gov (United States)

    Mackie, Thomas Rockwell; Heltemes, Thad Alexander

    2016-05-03

    An apparatus for generating medical isotopes provides for the irradiation of dry-phase, granular uranium compounds which are then dissolved in a solvent for separation of the medical isotope from the irradiated compound. Once the medical isotope is removed, the dissolved compound may be reconstituted in dry granular form for repeated irradiation.

  3. Cold Vacuum Drying (CVD) Facility, Diesel Generator Fire Protection

    CERN Document Server

    Singh, G

    2000-01-01

    This Acceptance Test Procedure (ATP) has been prepared to demonstrate that the Fire Protection and Detection System installed by Project W-441 (Cold Vacuum Drying Facility and Diesel Generator Building) functions as required by project specifications.

  4. Dry particle generation with a 3-D printed fluidized bed generator

    Directory of Open Access Journals (Sweden)

    M. Roesch

    2017-06-01

    Full Text Available Here we describe the design and testing of PRIZE (PRinted fluidIZed bed gEnerator, a compact fluidized bed aerosol generator manufactured using stereolithography (SLA printing. Dispersing small quantities of powdered materials – due to either rarity or expense – is challenging due to a lack of small, low-cost dry aerosol generators. With this as motivation, we designed and built a generator that uses a mineral dust or other dry powder sample mixed with bronze beads that sit atop a porous screen. A particle-free airflow is introduced, dispersing the sample as airborne particles. Total particle number concentrations and size distributions were measured during different stages of the assembling process to show that the SLA 3-D printed generator did not generate particles until the mineral dust sample was introduced. Time-series measurements with Arizona Test Dust (ATD showed stable total particle number concentrations of 10–150 cm−3, depending on the sample mass, from the sub- to super-micrometer size range. Additional tests with collected soil dust samples are also presented. PRIZE is simple to assemble, easy to clean, inexpensive and deployable for laboratory and field studies that require dry particle generation.

  5. Dry particle generation with a 3-D printed fluidized bed generator

    Science.gov (United States)

    Roesch, Michael; Roesch, Carolin; Cziczo, Daniel J.

    2017-06-01

    Here we describe the design and testing of PRIZE (PRinted fluidIZed bed gEnerator), a compact fluidized bed aerosol generator manufactured using stereolithography (SLA) printing. Dispersing small quantities of powdered materials - due to either rarity or expense - is challenging due to a lack of small, low-cost dry aerosol generators. With this as motivation, we designed and built a generator that uses a mineral dust or other dry powder sample mixed with bronze beads that sit atop a porous screen. A particle-free airflow is introduced, dispersing the sample as airborne particles. Total particle number concentrations and size distributions were measured during different stages of the assembling process to show that the SLA 3-D printed generator did not generate particles until the mineral dust sample was introduced. Time-series measurements with Arizona Test Dust (ATD) showed stable total particle number concentrations of 10-150 cm-3, depending on the sample mass, from the sub- to super-micrometer size range. Additional tests with collected soil dust samples are also presented. PRIZE is simple to assemble, easy to clean, inexpensive and deployable for laboratory and field studies that require dry particle generation.

  6. Preserving the supersaturation generation capability of amorphous drug-polysaccharide nanoparticle complex after freeze drying.

    Science.gov (United States)

    Kiew, Tie Yi; Cheow, Wean Sin; Hadinoto, Kunn

    2015-04-30

    While the supersaturation generation capability of amorphous nanopharmaceuticals (NPs) in their aqueous suspension form has been well established, their supersaturation generation is adversely affected after drying. Herein we investigated the effects of freeze drying on the supersaturation generation capability of a new class of amorphous NPs referred to as drug nanoplex prepared and stabilized by electrostatic complexation of drug molecules with polysaccharides (dextran sulfate). Using ciprofloxacin as the model drug, two types of freeze-drying adjuvants were investigated, i.e., (1) highly water-soluble excipient (trehalose, mannitol), whose role was to prevent irreversible NPs aggregations upon drying, and (2) crystallization inhibitor (hydroxypropylmethylcellulose (HPMC)), whose role was to suppress crystallization of the dissolved drug and the remaining solid phase. The results showed that dual-adjuvant formulations (i.e. trehalose-HPMC and mannitol-HPMC) were required to preserve the supersaturation generation capability of the drug nanoplex suspension after drying. Freeze drying with only one adjuvant type, or incorporating HPMC as physical mixtures with the freeze-dried nanoplex, were ineffective in preserving the supersaturation. The dual-adjuvant formulations produced prolonged supersaturation levels over 240min at ≈6-8× of the saturation solubility with comparable area under the curve (AUC) in the concentration versus time plot as that exhibited by the suspension form. Copyright © 2015 Elsevier B.V. All rights reserved.

  7. Generation of 1:1 Carbamazepine:Nicotinamide cocrystals by spray drying.

    Science.gov (United States)

    Patil, Shashank P; Modi, Sameer R; Bansal, Arvind K

    2014-10-01

    The present study investigates the potential of spray drying as a technique for generation of pharmaceutical cocrystals. Carbamazepine-Nicotinamide cocrystal (CNC) was chosen as model cocrystal system for this study. Firstly, CNC was generated using liquid assisted grinding and used for generation of phase solubility diagram (PSD) and ternary phase diagram (TPD). Both PSD and TPD were carefully evaluated for phase behavior of CNC when equilibrated with solvent. The undersaturated region with respect to CNC, as depicted by TPD, was selected as target region to initiate cocrystallization experiments. Various points in this region, representative of different compositions of Carbamazepine, Nicotinamide and CNC, were selected and spray drying was carried out. The spray dried product was characterized for solid state properties and was compared with CNC generated by liquid assisted grinding. Spray drying successfully generated CNC of similar quality as those generated by liquid assisted grinding. Moreover, there was no significant impact of process variables on formation of CNC. Spray drying, owing to its simplicity and industrial scalability, can be a promising method for large scale cocrystal generation.

  8. Review and assessment of engineering economic studies of dry cooled electrical generating plants

    Energy Technology Data Exchange (ETDEWEB)

    Fryer, B.C.

    1976-03-01

    The major U.S. studies conducted between 1970 and 1975 on the economics of dry cooled electrical generating plants are reviewed. This review was undertaken to collect, compare, and summarize the approaches, assumptions, and results of several major studies on dry cooling engineering economics, and to evaluate the computer codes associated with these economic studies. From this review it was concluded that adequate detailed evaluation of state-of-the-art dry cooling systems has not been conducted and that comprehensive computer programs capable of such evaluations are not publicly available. Therefore, it is recommended that: a method for determining power production costs of dry cooled plants should be developed which reflects the actual way a utility would interface a dry cooled plant with a utility system to minimize power production costs; a comprehensive detailed evaluation of metal finned tube state-of-the-art dry cooling systems should be conducted to determine if, and where, the costs of dry cooling can be reduced; and advanced dry cooling concepts should be evaluated for potential savings in power production costs. (LCL)

  9. Dry metal forming of high alloy steel using laser generated aluminum bronze tools

    Directory of Open Access Journals (Sweden)

    Freiße Hannes

    2015-01-01

    Full Text Available Regarding the optimization of forming technology in economic and environmental aspects, avoiding lubricants is an approach to realize the vision of a new green technology. The resulting direct contact between the tool and the sheet in non-lubricated deep drawing causes higher stress and depends mainly on the material combination. The tribological system in dry sliding has to be assessed by means on the one hand of the resulting friction coefficient and on the other hand of the wear of the tool and sheet material. The potential to generate tailored tribological systems for dry metal forming could be shown within the investigations by using different material combinations and by applying different laser cladding process parameters. Furthermore, the feasibility of additive manufacturing of a deep drawing tool was demonstrated. The tool was successfully applied to form circular cups in a dry metal forming process.

  10. Is there a difference in treatment outcomes between epidural injections with particulate versus non-particulate steroids?

    Energy Technology Data Exchange (ETDEWEB)

    Bensler, Susanne; Sutter, Reto; Pfirrmann, Christian W.A.; Peterson, Cynthia K. [Orthopedic University Hospital Balgrist, Department of Radiology, Zurich (Switzerland); University of Zurich, Faculty of Medicine, Zurich (Switzerland)

    2017-04-15

    To compare the outcomes of patients after interlaminar computed tomography (CT)-guided epidural injections of the lumbar spine with particulate vs. non-particulate steroids. 531 consecutive patients were treated with CT-guided lumbar interlaminar epidural injections with steroids and local anaesthetics. 411 patients received a particulate steroid and 120 patients received a non-particulate steroid. Pain levels were assessed using the 11-point numerical rating scale (NRS) and overall reported 'improvement' was assessed using the Patients Global Impression of Change (PGIC) at 1 day, 1 week and 1 month post-injection. Descriptive and inferential statistics were applied. Patients receiving particulate steroids had statistically significantly higher NRS change scores (p = 0.0001 at 1 week; p = 0.0001 at 1 month). A significantly higher proportion of patients receiving particulate steroids reported relevant improvement (PGIC) at both 1 week and 1 month post injection (p = 0.0001) and they were significantly less likely to report worsening at 1 week (p = 0.0001) and 1 month (p = 0.017). Patients treated with particulate steroids had significantly greater pain relief and were much more likely to report clinically relevant overall 'improvement' at 1 week and 1 month compared to the patients treated with non-particulate steroids. (orig.)

  11. Key Findings from the Artist Project on Aerosol Retention in a Dry Steam Generator

    Directory of Open Access Journals (Sweden)

    Abdelouahab Dehbi

    2016-08-01

    Full Text Available A steam generator tube rupture (SGTR event with a stuck-open safety relief valve constitutes one of the most serious accident sequences in pressurized water reactors (PWRs because it may create an open path for radioactive aerosol release into the environment. The release may be mitigated by the deposition of fission product particles on a steam generator's (SG's dry tubes and structures or by scrubbing in the secondary coolant. However, the absence of empirical data, the complexity of the geometry, and the controlling processes have, until recently, made any quantification of retention difficult to justify. As a result, past risk assessment studies typically took little or no credit for aerosol retention in SGTR sequences. To provide these missing data, the Paul Scherrer Institute (PSI initiated the Aerosol Trapping In Steam GeneraTor (ARTIST Project, which aimed to thoroughly investigate various aspects of aerosol removal in the secondary side of a breached steam generator. Between 2003 and 2011, the PSI has led the ARTIST Project, which involved intense collaboration between nearly 20 international partners. This summary paper presents key findings of experimental and analytical work conducted at the PSI within the ARTIST program.

  12. Studi Penggunaan Plat Elektroda Netral Stainless Steel 316 dan Aluminium Terhadap Performa Generator HHO Dry Cell

    Directory of Open Access Journals (Sweden)

    Tasrif Arifin

    2015-12-01

    Full Text Available Abstrak. Generator HHO merupakan alat yang menggunakan prinsip elektrolisis air untuk memisahkan unsur-unsur kandungan air murni (H2O menjadi Gas HHO, dalam upaya peningkatan performanya tentu dibutuhkan bahan konduktor yang memiliki sifat kelistrikan baik. Penambahan plat elektroda netral ialah bertujuan untuk meningkatkan performa elektroliser dan mengatasi berbagai macam permasalahan yang terjadi pada saat proses elektrolisis air bekerja. Penelitian ini menunjukkan bahwa plat elektroda netral aluminium mampu meningkatkan nilai performanya sedangkan untuk plat SS 316 mampu meminamalisir persentase losses energy. Larutan AMDK murni terbukti mampu meningkatkan produktivitas gas dibandingkan dengan larutan aquades murni, tetapi kelemahan dari larutan AMDK yaitu mudahnya terbentuk gel-gel, sehingga menghambat pergerakan elektron dan laju aliran produksi. Karateristik sifat bahan sangat berpengaruh terhadap pencapaian kinerja Generator HHO karena tidak semua jenis plat elektroda netral mampu meningkatkan performanya. Sifat-sifat kelistrikkan bahan yang sangat berpengaruh ialah sifat keelektronegatifan atau potesial elektroda dan koefisien nilai muai dari suatu bahan konduktor.   Usage Study Neutral Electrode Plate Stainless Steel 316 and Aluminium of Performance Generator HHO Dry Cell Type Abstract. Generator is a tool that use principle of water electrolysis to separated the element of pure water conscience (H2O be HHO gas, in effort to increase the perform of HHO Generator is needed a conductor ingredients which has a good electricity character the direction of addition neutral electrode plate is to increase the electrolyzer perform and to overcome every problem that happen when the water electrolisys process is going. This research shows that neutral electrode aluminium plate can increase the performance value and the SS 316 plate can minimize the percentage of losses energy. The pure AMDK solution proofs that can increase the gas productivity

  13. Effect of dry spells and soil cracking on runoff generation in a semiarid micro watershed under land use change

    Science.gov (United States)

    dos Santos, Julio Cesar Neves; de Andrade, Eunice Maia; Guerreiro, Maria João Simas; Medeiros, Pedro Henrique Augusto; de Queiroz Palácio, Helba Araújo; de Araújo Neto, José Ribeiro

    2016-10-01

    Soil and water resources effective management and planning in a river basin rely on understanding of runoff generation processes, yield, and their relations to rainfall. This study analyzes the effects of antecedent soil moisture in an expansive soil and the influence of dry spells on soil cracking, runoff generation and yield in a semiarid tropical region in Brazil subject to land use change. Data were collected from 2009 to 2013 in a 2.8 ha watershed, totaling 179 natural rainfall events. In the first year of study (2009), the watershed maintained a typical dry tropical forest cover (arboreal-shrub Caatinga cover). Before the beginning of the second year of study, gamba grass (Andropogon gayanus Kunth) was cultivated after slash and burn of native vegetation. Gamba grass land use was maintained for the rest of the monitoring period. The occurrence of dry spells and the formation of cracks in the Vertisol soil were the most important factors controlling flow generation. Dry spells promoted crack formation in the expansive soil, which acted as preferential flow paths leading to high initial abstractions: average conditions for runoff to be generated included soil moisture content above 20%, rainfall above 70 mm, I30max above 60 mm h-1 and five continuous dry days at the most. The change of vegetation cover in the second year of study did not alter significantly the overall conditions for runoff initiation, showing similar cumulative flow vs. rainfall response, implying that soil conditions, such as humidity and cracks, best explain the flow generation process on the semiarid micro-scale watershed with Vertisol soil.

  14. Protective coatings for the Ontario Power Generation Inc. dry storage container

    Energy Technology Data Exchange (ETDEWEB)

    Lewak, R. [Kinectrics Inc., Toronto, Ontario (Canada)]. E-mail: richard.lewak@kinectrics.com; Ellsworth, B. [Ontario Power Generation Inc., Tiverton, Ontario (Canada)]. E-mail: brad.ellsworth@opg.com

    2006-07-01

    Ontario Power Generation (OPG), formerly Ontario Hydro, has been storing used CANDU fuel in the irradiated fuel bays (IFBs) at its nuclear generating stations since they began operation. As the IFBs began reaching capacity, the dry storage of previously cooled used fuel became an economically viable alternative to the construction of additional wet fuel bays and the OPG Dry Storage Container (DSC) was developed. The OPG DSC is a free standing reinforced concrete container, with an inner and outer carbon steel shell, for the storage and transportation of used CANDU fuel. The outer steel shell of the DSC is protected by an applied coating system to facilitate decontamination of the outer shell and to provide protective corrosion resistance. In 1990 a study was performed to determine the optimal commercial coating system to be considered as a protective coating on the DSC outer shell. An experimental program was undertaken to identify the optimal commercial coating system, which had the best decontamination characteristics as well as maximum resistance to abrasion, weathering and durability. A total of nine coating systems were selected for study, five epoxy coatings, three epoxy/polyurethane coatings, and one polyurethane coating. Sand blasted carbon steel coupons, similar to the DSC outer shell, were coated by the manufacturers and submitted for testing of the decontamination characteristics such as activity uptake, decontamination of the coating, and the activity 'sweating' phenomenon. Tests identified four commercially available pure epoxy and epoxy/polyurethane protective coating systems as being the most promising for the exterior of the DSC surface. Of these four, the coating system chosen for use on the DSC was an epoxy/polyurethane system. After a decade of use, however, several safety and environmental concerns centering on the isocyanate content present in the polyurethane and the Volatile Organic Component (VOC) content of the coating system have

  15. A Rich Morphological Diversity of Biosaline Drying Patterns Is Generated by Different Bacterial Species, Different Salts and Concentrations: Astrobiological Implications

    Science.gov (United States)

    Gómez Gómez, José María; Medina, Jesús; Rull, Fernando

    2016-07-01

    Biosaline formations (BSFs) are complex self-organized biomineral patterns formed by "hibernating" bacteria as the biofilm that contains them dries out. They were initially described in drying biofilms of Escherichia coli cells + NaCl. Due to their intricate 3-D morphology and anhydrobiosis, these biomineralogical structures are of great interest in astrobiology. Here we report experimental data obtained with various alkali halide salts (NaF, NaCl, NaBr, LiCl, KCl, CsCl) on BSF formation with E. coli and Bacillus subtilis bacteria at two saline concentrations: 9 and 18 mg/mL. Our results indicate that, except for LiCl, which is inactive, all the salts assayed are active during BSF formation and capable of promoting the generation of distinctive drying patterns at each salt concentration. Remarkably, the BSFs produced by these two bacterial species produce characteristic architectural hallmarks as the BSF dries. The potential biogenicity of these biosaline drying patterns is studied, and the astrobiological implications of these findings are discussed.

  16. Cloud condensation nucleus activity comparison of dry- and wet-generated mineral dust aerosol: the significance of soluble material

    OpenAIRE

    S. Garimella; Huang, Y.-W.; Seewald, J. S.; D. J. Cziczo

    2014-01-01

    This study examines the interaction of clay mineral particles and water vapor for determining the conditions required for cloud droplet formation. Droplet formation conditions are investigated for two common clay minerals, illite and sodium-rich montmorillonite, and an industrially derived sample, Arizona Test Dust. Using wet and dry particle generation coupled to a differential mobility analyzer (DMA) and cloud condensation nuclei counter, the critical activation of the cla...

  17. Dry metal forming of high alloy steel using laser generated aluminum bronze tools

    OpenAIRE

    Freiße Hannes; Köhler Henry; Seefeld Thomas; Vollertsen Frank

    2015-01-01

    Regarding the optimization of forming technology in economic and environmental aspects, avoiding lubricants is an approach to realize the vision of a new green technology. The resulting direct contact between the tool and the sheet in non-lubricated deep drawing causes higher stress and depends mainly on the material combination. The tribological system in dry sliding has to be assessed by means on the one hand of the resulting friction coefficient and on the other hand of the wear of the too...

  18. Cloud condensation nucleus activity comparison of dry- and wet-generated mineral dust aerosol: the significance of soluble material

    Science.gov (United States)

    Garimella, S.; Huang, Y.-W.; Seewald, J. S.; Cziczo, D. J.

    2014-06-01

    This study examines the interaction of clay mineral particles and water vapor for determining the conditions required for cloud droplet formation. Droplet formation conditions are investigated for two common clay minerals, illite and sodium-rich montmorillonite, and an industrially derived sample, Arizona Test Dust. Using wet and dry particle generation coupled to a differential mobility analyzer (DMA) and cloud condensation nuclei counter, the critical activation of the clay mineral particles as cloud condensation nuclei is characterized. Electron microscopy (EM) is used in order to determine non-sphericity in particle shape. It is also used in order to determine particle surface area and account for transmission of multiply charged particles by the DMA. Single particle mass spectrometry and ion chromatography are used to investigate soluble material in wet-generated samples and demonstrate that wet and dry generation yield compositionally different particles. Activation results are analyzed in the context of both κ-Köhler theory (κ-KT) and Frenkel-Halsey-Hill (FHH) adsorption activation theory. This study has two main results: (1) κ-KT is the suitable framework to describe clay mineral nucleation activity. Apparent differences in κ with respect to size arise from an artifact introduced by improper size-selection methodology. For dust particles with mobility sizes larger than ~300 nm, i.e., ones that are within an atmospherically relevant size range, both κ-KT and FHH theory yield similar critical supersaturations. However, the former requires a single hygroscopicity parameter instead of the two adjustable parameters required by the latter. For dry-generated particles, the size dependence of κ is likely an artifact of the shape of the size distribution: there is a sharp drop-off in particle concentration at ~300 nm, and a large fraction of particles classified with a mobility diameter less than ~300 nm are actually multiply charged, resulting in a much

  19. Cumulative Effect of Pressing and Drying on Stress Generation within a Green Ceramic Compact

    Directory of Open Access Journals (Sweden)

    E. Vidal-Sallé

    2014-01-01

    Full Text Available The internal stress field induced by uniaxial pressing and subsequent convective drying of a green ceramic powder was simulated by the finite element method. A density dependent elastoplastic constitutive law was used for the mechanical modeling of the compaction. A diffusive water transfer equation and a purely elastic behavior with imposed hydrostrain involving shrinkage were applied for the modeling of the drying process. The key material properties (hydrodiffusivity, hydrocontraction coefficient, Young’s modulus, Poisson’s ratio, and yield surface parameters had been experimentally measured and introduced as functions of material density and water content. If residual stresses due to the compaction operation were taken into account, the maximum value of the tensile stress at the top external edge of the wheel and at the beginning of the drying process was two times higher than for a stress free green ceramic compact. Beyond the residual stress onset, the compaction operation induced density heterogeneities which had important consequences on the mechanical behavior of the compact.

  20. Determination of sulfur and nitrogen compounds during the processing of dry fermented sausages and their relation to amino acid generation.

    Science.gov (United States)

    Corral, Sara; Leitner, Erich; Siegmund, Barbara; Flores, Mónica

    2016-01-01

    The identification of odor-active sulfur and nitrogen compounds formed during the processing of dry fermented sausages was the objective of this study. In order to elucidate their possible origin, free amino acids (FAAs) were also determined. The volatile compounds present in the dry sausages were extracted using solvent assisted flavor evaporation (SAFE) and monitored by one and two-dimensional gas chromatography with different detectors: mass spectrometry (MS), nitrogen phosphorous (NPD), flame photometric (FPD) detectors, as well as gas chromatography-olfactometry. A total of seventeen sulfur and nitrogen compounds were identified and quantified. Among them, 2-acetyl-1-pyrroline was the most potent odor active compound, followed by methional, ethylpyrazine and 2,3-dihydrothiophene characterized by toasted, cooked potato, and nutty notes. The degradation of FAAs, generated during processing, was related to the production of aroma compounds, such as methionine forming methional and benzothiazole while ornithine was the precursor compound for 2-acetyl-1-pyrroline and glycine for ethylpyrazine.

  1. Generation of strength in a drying film: How fracture toughness depends on dispersion properties

    Science.gov (United States)

    Birk-Braun, Natalie; Yunus, Kamran; Rees, Eric J.; Schabel, Wilhelm; Routh, Alexander F.

    2017-02-01

    The fracture toughness of colloidal films is measured by characterizing cracks which form during directional drying. Images from a confocal microscope are processed to measure the crack width as a function of distance from the crack tip. Applying theory for thin elastic films the fracture toughness is extracted. It is found that the fracture toughness scales with the particle size to the -0.8 power and that the critical energy release rate scales with the particle size to the -1.3 power. In addition, the fracture toughness is found to increase at lower evaporation rates, but the film thickness does not have a significant effect.

  2. Negentropy Generation and Fractality in the Dry Friction of Polished Surfaces

    Directory of Open Access Journals (Sweden)

    Mordecai Segall

    2010-03-01

    Full Text Available We consider the Robin Hood model of dry friction to study entropy transfer during sliding. For the polished surface (steady state we study the probability distribution of slips and find an exponential behavior for all the physically relevant asperity interaction-distance thresholds. In addition, we characterize the time evolution of the sample by its spatial fractal dimension and by its entropy content. Starting from an unpolished surface, the entropy decreases during the Robin Hood process, until it reaches a plateau; thereafter the system fluctuates above the critical height. This validates the notion that friction increases information in the neighborhood of the contacting surface at the expense of losing information in remote regions. We explain the practical relevance of these results for engineering surface processing such as honing.

  3. Dry Etching

    DEFF Research Database (Denmark)

    Stamate, Eugen; Yeom, Geun Young

    2016-01-01

    Production of large-area flat panel displays (FPDs) involves several pattern transfer and device fabrication steps that can be performed with dry etching technologies. Even though the dry etching using capacitively coupled plasma is generally used to maintain high etch uniformity, due to the need...... for the higher processing rates in FPDs, high-density plasma processing tools that can handle larger-area substrate uniformly are more intensively studied especially for the dry etching of polysilicon thin films. In the case of FPD processing, the current substrate size ranges from 730 × 920 mm (fourth...... generation) to 2,200 × 2,500 mm (eighth generation), and the substrate size is expected to increase further within a few years. This chapter aims to present relevant details on dry etching including the phenomenology, materials to be etched with the different recipes, plasma sources fulfilling the dry...

  4. Pengaruh Penambahan PWM (Pulse Width Modulation Pada Generator HHO Tipe Dry Cell

    Directory of Open Access Journals (Sweden)

    Fungky Dyan Pertiwi

    2013-09-01

    Full Text Available Generator HHO memanfaatkan proses elektrolisis air agar mendapatkan gas H2. Namun, pada praktiknya pemakaian arus dari aki yang besar dan temperatur tinggi membuat bejana generator menjadi cepat rusak, sehingga dibutuhkan tambahan rangkaian elektronika PWM pada pengujian generator HHO guna mengatasi permasalahan tersebut. Penelitian menggunakan elektroda plat berjumlah 9 berdimensi 120mm 120mm, tebal 1mm dan dibatasi oleh o-ring dengan diameter 126mm, tebal 3mm. Pengujian dilakukan secara eksperimen dengan 2 kelompok yaitu kelompok control yang mana pengujian tanpa menggunakan PWM serta kelompok uji dimana pengujian menggunakan PWM dengan variasi duty cycle 30%, 50% dan 70%. Pengujian dilakukan hingga temperatur elektrolit 93oC. Hasil uji didapatkan bahwa arus, laju produksi dan efisiensi terbesar didapatkan pada pengujian tanpa PWM yang mencapai 60,6A, 6,033 10-6kg/s dan 25,69%. Namun, pada pengambilan data kedua efisiensi turun menjadi 19,74%. Penambahan PWM pada pengujian berpengaruh pada arus dan temperatur yang stabil meskipun laju produksi dan efisiensi lebih kecil daripada pengujian tanpa PWM. Pengujian dengan PWM pada duty cycle 70% menghasilkan laju produksi dan efisiensi terbesar yang mencapai 1,843 10-6 kg/s dan 15,19%.

  5. Generation of Hot Water from Hot-Dry for Heavy-Oil Recovery in Northern Alberta, Canada

    Science.gov (United States)

    Pathak, V.; Babadagli, T.; Majorowicz, J. A.; Unsworth, M. J.

    2011-12-01

    The focus of prior applications of hot-dry-rock (HDR) technology was mostly aimed at generating electricity. In northern Alberta, the thermal gradient is low and, therefore, this technology is not suitable for electricity generation. On the other hand, the cost of steam and hot water, and environmental impacts, are becoming critical issues in heavy-oil and bitumen recovery in Alberta. Surface generation of steam or hot-water accounts for six percent of Canada's natural gas consumption and about 50 million tons of CO2 emission. Lowered cost and environmental impacts are critical in the widespread use of steam (for in-situ recovery) and hot-water (for surface extraction of bitumen) in this region. This paper provides an extensive analysis of hot-water generation to be used in heavy-oil/bitumen recovery. We tested different modeling approaches used to determine the amount of energy produced during HDR by history matching to example field data. The most suitable numerical and analytical models were used to apply the data obtained from different regions containing heavy-oil/bitumen deposits in northern Alberta. The heat generation capacity of different regions was determined and the use of this energy (in the form of hot-water) for surface extraction processes was evaluated. Original temperature gradients were applied as well as realistic basement formation characteristics through an extensive hydro thermal analysis in the region including an experimental well drilled to the depth of 2,500m. Existing natural fractures and possible hydraulic fracturing scenarios were evaluated from the heat generation capacity and the economics points of view. The main problem was modeling difficulties, especially determination and representation of fracture network characteristics. A sensitivity analysis was performed for the selected high temperature gradient regions in Alberta. In this practice, the characteristics of hydraulic fractures, injection rate, depth, the distance between

  6. Hydrodistillation and in situ microwave-generated hydrodistillation of fresh and dried mint leaves: a comparison study.

    Science.gov (United States)

    Orio, Laura; Cravotto, Giancarlo; Binello, Arianna; Pignata, Giuseppe; Nicola, Silvana; Chemat, Farid

    2012-12-01

    Hydrodistillation (HD) has been used since ancient times for the extraction of essential oils (EO). Despite the intrinsic limitations of this technique, it remains the most common method both in the laboratory and on an industrial scale. The main drawbacks are the long extraction time involved and the risk of thermal degradation. Over the last decade, microwave-assisted extraction (MAE) and in situ microwave-generated hydrodistillation (MGH) have been shown to be the most promising techniques in improving plant extraction and hydrodistillation. In this study we compare HD with MGH in the extraction of several mint species cultivated in Piedmont: Mentha spicata L. var. rubra, Mentha spicata L. var. viridis and Mentha piperita L. MGH requires either fresh plant or rehydrated material, it is extremely fast and allows a reduction in energy consumption and overall cost. All the EO have been analyzed by gas chromatography-mass spectrometry. A mechanism of microwave-generated essential oil extraction has been proposed to explain the differences in the composition of the oil obtained from this environmentally friendly technique. The yields and composition percentages of the EO obtained by HD and in situ MGH of fresh and dried mint leaves lie in a relatively narrow range, although MGH is faster. MW polarization effects and the water solubility of the components influence extract composition. Copyright © 2012 Society of Chemical Industry.

  7. A substitute model of two-dimensional dry friction exposed to dither generated by rolling contact of wheel and rail

    Science.gov (United States)

    Piotrowski, Jerzy

    2012-10-01

    Dither generated by rolling contact of wheel and rail smoothes dry friction damping provided by the primary suspension dampers of freight wagons and it should be taken into account in numerical simulations. But numerically the problem is non-smooth and this leads to long execution time during simulation, especially when the vehicle with friction dampers is modelled in the environment of an multi-body system simulation program, whose solver has to cope with many strong non-linearities. The other difficulty is the necessity of handling within the code a number of big volume files of recorded dither sampled with high frequency. To avoid these difficulties, a substitute model of two-dimensional dry friction exposed to dither is proposed that does not need application of dither during simulation, but it behaves as if dither were applied. Due to this property of the model, the excitation of the vehicle model by track irregularities may be supplied as low-frequency input, which allows fast execution and, the necessity of handling high-volume files of recorded dither is avoided. The substitute model is numerically effective. To identify parameters of the substitute model, a pre-processing employing a sample of the realistic dither is carried-out on a simple two-degrees-of-freedom system. The substitute model is anisotropic, describing anisotropic properties of the two-dimensional friction arising in the presence of one-dimensional dither. The model may be applied in other branches of engineering, for example, in mechatronics and robotics, where application of dither may improve the accuracy of positioning devices.

  8. Dry powder aerosols generated by standardized entrainment tubes from drug blends with lactose monohydrate: 1. Albuterol sulfate and disodium cromoglycate.

    Science.gov (United States)

    Xu, Zhen; Mansour, Heidi M; Mulder, Tako; McLean, Richard; Langridge, John; Hickey, Anthony J

    2010-08-01

    The major objective of this study was: discriminatory assessment of dry powder aerosol performance using standardized entrainment tubes (SETs) and lactose-based formulations with two model drugs. Drug/lactose interactive physical mixtures (2%w/w) were prepared. Their properties were measured: solid-state characterization of phase behavior and molecular interactions by differential scanning calorimetry and X-ray powder diffraction; particle morphology and size by scanning electron microscopy and laser diffraction; aerosol generation by SETs and characterization by twin-stage liquid impinger and Andersen cascade impactor operated at 60 L/min. The fine particle fraction (FPF) was correlated with SET shear stress (tau(s)), using a novel powder aerosol deaggregation equation (PADE). Drug particles were <5 microm in volume diameter with narrow unimodal distribution (Span <1). The lowest shear SET (tau(s) = 0.624 N/m(2)) gave a higher emitted dose (ED approximately 84-93%) and lower FPF (FPF(6.4) approximately 7-25%). In contrast, the highest shear SET (tau(s) = 13.143 N/m(2)) gave a lower ED (ED approximately 75-89%) and higher FPF (FPF(6.4) approximately 15-46%). The performance of disodium cromoglycate was superior to albuterol sulfate at given tau(s), as was milled with respect to sieved lactose monohydrate. Excellent correlation was observed (R(2) approximately 0.9804-0.9998) when pulmonary drug particle release from the surface of lactose carriers was interpreted by PADE linear regression for dry powder formulation evaluation and performance prediction.

  9. Practicality of solar drier for drying tropical fruits and marine products as income generating for rural development

    Energy Technology Data Exchange (ETDEWEB)

    Pablo, I.S.

    1978-01-01

    The feasibility and technical efficiency of a polythene solar drier for drying tropical fruits and marine products was investigated. Four popular tropical fruits were studied, namely: mango, langka (jackfruit), papaya and banana. These four fruits are generally popular on the market. In this study, the results of a polythene solar drier are compared to those of direct sun drying and it was found that the drier products had the more appealing color and texture. Also, a 25 to 40% reduction in drying time was obtained when the above fruits were dried using the solar drier as compared to direct sun drying. The solar drier was also found to be highly practical and efficient for the drying of marine products, namely: striped mackerel (Rastrelliger chrysozonus), short-bodied mackerel (R. brachysomus) and squid (Loligo opalescens). The drying time was reduced from 20 to 14 hours using the solar drier as compared to direct sun-drying. A reduction of 40% of the required salt resulted from the use of the solar drier, since microbial contamination from the environment was totally arrested. Solar technology is considered practical for rural communities because of the following advantages: low investment, labor cost savings, low delivery costs, products free from insect and mold contamination, longer product shelf life and better organoleptic characteristics. Solar drying provides a processing technology which results in higher profits and more savings for rural processors. 20 references.

  10. Dry Eye

    Science.gov (United States)

    ... Eye > Facts About Dry Eye Facts About Dry Eye This information was developed by the National Eye ... the best person to answer specific questions. Dry Eye Defined What is dry eye? Dry eye occurs ...

  11. Generation of dried tube specimen for HIV-1 viral load proficiency test panels: a cost-effective alternative for external quality assessment programs.

    Science.gov (United States)

    Ramos, Artur; Nguyen, Shon; Garcia, Albert; Subbarao, Shambavi; Nkengasong, John N; Ellenberger, Dennis

    2013-03-01

    Participation in external quality assessment programs is critical to ensure quality clinical laboratory testing. Commercially available proficiency test panels for HIV-1 virus load testing that are used commonly in external quality assessment programs remain a financial obstacle to resource-limited countries. Maintaining cold-chain transportation largely contributes to the cost of traditional liquid proficiency test panels. Therefore, we developed and evaluated a proficiency test panel using dried tube specimens that can be shipped and stored at ambient temperature. This dried tube specimens panel consisted of 20 μl aliquots of a HIV-1 stock that were added to 2 ml tubes and left uncapped for drying, as a preservation method. The stability of dried tube specimens at concentrations ranging from 10² to 10⁶·⁵ RNA copies/ml was tested at different temperatures over time, showing no viral load reduction at 37 °C and a decrease in viral load smaller than 0.5 Log₁₀ at 45 °C for up to eight weeks when compared to initial results. Eight cycles of freezing-thawing had no effect on the stability of the dried tube specimens. Comparable viral load results were observed when dried tube specimen panels were tested on Roche CAPTAQ, Abbott m2000, and Biomerieux easyMAG viral load systems. Preliminary test results of dried proficiency test panels shipped to four African countries at ambient temperature demonstrated a low inter assay variation (SD range: 0.29-0.41 Log₁₀ RNA copies/ml). These results indicated that HIV-1 proficiency test panels generated by this methodology might be an acceptable alternative for laboratories in resource-limited countries to participate in external quality assessment programs.

  12. Stochastic weather generator based on dry and wet spells%基于干湿期的随机天气发生器

    Institute of Scientific and Technical Information of China (English)

    李世娟; 诸叶平

    2014-01-01

    Climate change is important for agriculture and the environment. Changing rainfall amounts have positively or negatively impact on plant growth. The reduction in solar radiation can potentially reduce the photosynthesis, growth of plants and potential evaporation. Stochastic weather generators can generate a long series of weather variable statistics, which usually are used as the input of system models to analyze and evaluate the effect of climate on systems. This paper described a stochastic weather generator WGDWS which consisted of dry and wet spell, daily precipitation, solar radiation, and maximum and minimum temperature models. It included two types of models. The first one was a dry and wet spell model in which dry and wet spell lengths were defined as an independent stochastic variable respectively, and it was the principal model. The second one referred to other weather variables whose modeling was dependent on the first one. The generation of weather element values mainly contained two steps: generating a dry or wet spell length based on their empirical distribution in a month, and then generating the daily value of each variable in the related period. The generator could provide any length of time series of daily weather stochastic values as input data for the driving of crop models. The observed 1973 -2003 daily weather data from nine meteorological sites in different geographical region in China were used to determine model parameters of a generator in two types of generator, including WGDWS which was based on dry and wet spell and DWSS which was based on dry and wet days. After generating 100 years of daily weather variables, including total solar radiation, maximum temperature, minimum temperature and precipitation, at the above nine sites with the help of WGDWS and DWSS, monthly statistics of these variables were computed. A T-test showed that there was no significant difference between the generated and observed monthly statistics for different

  13. A reappraisal of ignimbrite emplacement: progressive aggradation and changes from particulate to non-particulate flow during emplacement of high-grade ignimbrite

    Science.gov (United States)

    Branney, Michael J.; Kokelaar, Peter

    1992-08-01

    We propose a mechanism by which massive ignimbrite and layered ignimbrite sequences — the latter liable to have been previously interpreted as multiple flow units-form by progressive aggradation during sustained passage of a single particulate flow. In the case of high-temperature eruptive products the mechanism simplifies interpretation of problematic deposits that exhibit pronounced vertical and lateral variations in texture, including between non-welded, eutaxitic, rheomorphic (lineated) and lava-like. Agglutination can occur within the basal part of a hot density-stratified flow. During initial incursion of the flow, agglutinate chills and freezes against the ground. During sustained passage of the flow, agglutination continues so that the non-particulate (agglutinate) layer thickens (aggrades) and becomes mobile, susceptible to both gravity-induced motion and traction-shear imparted by the overriding particulate part of the flow. The particulate to non-particulate (P-NP) transition occurs in and just beneath a depositional boundary layer, where disruptive collisions of hot viscous droplets give way, via sticky grain interactions, to fluidal behavior following adhesion. Because they have different rheologies, the particulate and non-particulate flow components travel at different velocities and respond to topography in different ways. This may cause detachment and formation of two independent flows. The P-NP transition is controlled by factors that influence the rheological properties of individual erupted particles (strain rate, temperature, and composition including volatiles), by cooling and volatile exsolution during transport, and by the particle-size population and concentration characteristics of the depositional boundary layer. At any one location along the flow path one or more of these can change through time (unsteady flow). Thus the P-NP transition can develop momentarily or repeatedly during the passage of an unsteady flow, or it can occur

  14. Model experiment: Heat generation from renewable fuels - recycling fodder drying plant at Apolda, Saxony. Feasibility study; Modellversuch Waermeerzeugung aus Nachwachsenden Rohstoffen: Recycling-Futtermitteltrockenwerk Apolda. Machbarkeitsstudie

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-03-01

    The conditions for the culture of energy plants on agricultural useful area, their ecological classification and the economically energetic utilization of bio fuel insteed of brown coal have been investigated. The priorities of the study were the preliminary work for the design, retrofitting and the generation of a hot gas generator with a heating capacity of 6.5 MW for food with drying as a model plant for the heat generation from renewable raw material in similar cases of application. (orig.). 1 fig., 1 tab., 2 maps. [Deutsch] Die Bedingungen fuer den Anbau von Energiepflanzen auf landwirtschaftlicher Nutzflaeche, deren Oekologische Einordnung und die wirtschaftlich energetische Nutzung des Biobrennstoffes anstelle von Braunkohle wurden untersucht. Schwerpunkte der Studie waren die Vorarbeiten fuer die Planung, die Umruestung und den Betrieb eines Heissgaserzeugers mit einer Waermeleistung von 6,5 MW zu Futtermitteltrocknung als Modellanlage fuer die Waermeerzeugung aus nachwachsenden Rohstoffen in gleichgelagerten Anwendungsfaellen. (orig.)

  15. Biogeochemical generation of dissolved inorganic carbon and nitrogen in the North Branch of inner Changjiang Estuary in a dry season

    Science.gov (United States)

    Zhai, Wei-Dong; Yan, Xiu-Li; Qi, Di

    2017-10-01

    We investigated the surface water carbonate system, nutrients, and relevant hydrochemical parameters in the inner Changjiang (Yangtze River) Estuary in early spring 2009 and 2010. The two surveys were carried out shortly after spring-tide days, and covered both the channel-like South Branch and the freshwater-blocked North Branch. In the North Branch, with a water residence time of approximately one month, we detected remarkable partial pressures of CO2 (pCO2) of 930-1518 μatm with a salinity range of 4.5-17.4, which were substantially higher than the South Branch pCO2 values of 700-1100 μatm at salinities of less than 0.88. The North Branch pCO2 distribution pattern is unique compared with many other estuaries where aquatic pCO2 normally declines with salinity increase. Furthermore, the biogeochemical additions of ammonium (7.4-65.7 μmol kg-1) and alkalinity (196-695 μmol kg-1) were identified in salinities between 4 and 16 in the North Branch. Based on field data analyses and simplified stoichiometric equations, we suggest that the relatively high North Branch pCO2 values and estuarine additions of dissolved inorganic nitrogen/carbon in the mid-salinity area were strongly associated with each other. These signals were primarily controlled by biogeochemical processes in the North Branch, combining biogenic organic matter decomposition (i.e. respiration), ammonia oxidation, CaCO3 dissolution, and CO2 degassing. In the upper reach of the South Branch, notable salinity values of 0.20-0.88 were detected, indicating saltwater spillover from the North Branch. These spillover waters had minor contributions (1.5-6.9%) to the springtime nutrient, dissolved inorganic carbon, and alkalinity export fluxes from Changjiang to the adjacent East China Sea. This is the first attempt to understand the biogeochemical controls of the unique pCO2 distributions in the North Branch, and to evaluate the effects of saltwater spillover from the North Branch on dry-season export fluxes

  16. Dry cooling of power generating stations: a summary of the economic evaluation of several advanced concepts via a design optimization study and a conceptual design and cost estimate

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, B.M.; Allemann, R.T.; Faletti, D.W.; Fryer, B.C.; Zaloudek, F.R.

    1976-09-01

    Due to enhanced concern about water supplies and water use priorities, dry cooling systems for thermal power plants are receiving increased consideration, even though electric power from dry-cooled power plants currently costs 10 to 15 percent more than power from wet-cooled plants. A two-year study which analyzed the performance of existing dry-cooled systems and which developed economic and performance models for cost optimization of dry-cooled systems is reported. First, a design optimization code was used to compare the cost of a number of advanced all-dry systems. Then, 5 different dry/wet systems were carried through conceptual design and cost estimating. The results showed for either an all dry or a combination wet-and-dry cooling system, cost optimization can be achieved with an advanced system using ammonia as an intermediate heat exchange fluid (between the turbine and the dry tower), and that development of the ammonia concept should procede in order to provide performance and reliability data for the ammonia system. (LCL)

  17. Data for generation of all Tables and Figures for AIMS-ES publication in 2016 pertaining to dry sorbent injection of trona for acid gas control

    Data.gov (United States)

    U.S. Environmental Protection Agency — emissions data and removal efficiencies for coal combustion utilizing PM control devices and dry sorbent injection of trona specifically for acid gas control. This...

  18. Generations.

    Science.gov (United States)

    Chambers, David W

    2005-01-01

    Groups naturally promote their strengths and prefer values and rules that give them an identity and an advantage. This shows up as generational tensions across cohorts who share common experiences, including common elders. Dramatic cultural events in America since 1925 can help create an understanding of the differing value structures of the Silents, the Boomers, Gen Xers, and the Millennials. Differences in how these generations see motivation and values, fundamental reality, relations with others, and work are presented, as are some applications of these differences to the dental profession.

  19. Randomized noninferiority field trial comparing 2 first-generation cephalosporin products at dry off in quarters receiving an internal teat sealant in dairy cows.

    Science.gov (United States)

    Ospina, P A; Rota, N; Locatelli, C; Colombo, L; Pollera, C; Giacinti, G; Bronzo, V; Casula, A; Arpinelli, A; Brossette, V; Facchi, M; Patelli, A; Ruggeri, A; Barberio, A; Potenza, G; Nydam, D V; Moroni, P

    2016-08-01

    The study objective was to compare 2 commercial dry cow mastitis products at the quarter level, with concurrent internal teat sealant application, evaluating the cure risk difference, odds of a cure, odds of a new intramammary infection (NIMI) during the dry period, and risk for a clinical mastitis (CM) case between calving and 60d in milk (DIM). A total of 590 cows (2,360 quarters) from 8 commercial dairy herds in Italy were enrolled and randomized to 1 of the 2 treatments at dry off: Cefovet A (CF; 250mg of cephazoline; Merial Italia SpA, Milan, Italy), and Cepravin (CP; 250mg of cephalonium dehydrate MSD Animal Health Srl, Segrate, Italy). Quarter milk samples were collected before dry cow therapy treatment at dry off, 2 to 9 DIM, and 10 to 17 DIM. Quarter milk samples from CM cases were collected during the first 60 DIM. Noninferiority analysis was used to evaluate the effect of treatment on the risk difference of a bacteriological cure during the dry period, the primary outcome. The odds of cure, developing a NIMI during the dry period, and the risk of a CM event within 60 DIM were evaluated with multivariable logistic regression and hazard analysis, respectively. The overall crude quarter-level prevalence of NIMI at dry off was 15.3%. The most common pathogen isolated from milk samples at dry-off was coagulase-negative staphylococci. Noninferiority analysis showed no effect of treatment on the risk difference for a cure between dry off and both postpartum samples, difference was 0.013. The least squares means from the multivariable model evaluating the odds of cure was 94% for CF and 95%for CP. We observed no effect of treatment on the odds for the presence of a NIMI at 2 to 9 DIM (least squares means: CF=0.09 and CP=0.07), nor did we note a difference in risk of experiencing a CM event between calving and 60 DIM (hazard ratio=0.8). In conclusion, no difference was observed between the 2 products evaluated when assessing the aforementioned outcomes in

  20. century drying

    Science.gov (United States)

    Cook, Benjamin I.; Smerdon, Jason E.; Seager, Richard; Coats, Sloan

    2014-11-01

    Global warming is expected to increase the frequency and intensity of droughts in the twenty-first century, but the relative contributions from changes in moisture supply (precipitation) versus evaporative demand (potential evapotranspiration; PET) have not been comprehensively assessed. Using output from a suite of general circulation model (GCM) simulations from phase 5 of the Coupled Model Intercomparison Project, projected twenty-first century drying and wetting trends are investigated using two offline indices of surface moisture balance: the Palmer Drought Severity Index (PDSI) and the Standardized Precipitation Evapotranspiration Index (SPEI). PDSI and SPEI projections using precipitation and Penman-Monteith based PET changes from the GCMs generally agree, showing robust cross-model drying in western North America, Central America, the Mediterranean, southern Africa, and the Amazon and robust wetting occurring in the Northern Hemisphere high latitudes and east Africa (PDSI only). The SPEI is more sensitive to PET changes than the PDSI, especially in arid regions such as the Sahara and Middle East. Regional drying and wetting patterns largely mirror the spatially heterogeneous response of precipitation in the models, although drying in the PDSI and SPEI calculations extends beyond the regions of reduced precipitation. This expansion of drying areas is attributed to globally widespread increases in PET, caused by increases in surface net radiation and the vapor pressure deficit. Increased PET not only intensifies drying in areas where precipitation is already reduced, it also drives areas into drought that would otherwise experience little drying or even wetting from precipitation trends alone. This PET amplification effect is largest in the Northern Hemisphere mid-latitudes, and is especially pronounced in western North America, Europe, and southeast China. Compared to PDSI projections using precipitation changes only, the projections incorporating both

  1. 城市污泥生物干化过程的有机质转化与产水规律%Dynamic variations of organic compositions and water generation during bio-drying of sewage sludge

    Institute of Scientific and Technical Information of China (English)

    蔡璐; 葛奇峰; 高定; 沈玉君

    2016-01-01

    Mechanically dewatered sewage sludge generally has a moisture content that ranges from 80% to 85%. This high level of moisture makes it necessary for this type of sludge to be dewatered and dried to facilitate the disposal. Bio-drying of sewage sludge based on thermophilic aerobic fermentation is an economical and energy-saving method for sludge disposal. During the bio-drying process, microbial water, which plays an important role in the final efficiency of sewage sludge bio-drying, is generated by the degradation of organic matter. Accordingly, the investigations of dynamic variations in organic composition and water generation are essential to the management of sewage sludge bio-drying. Therefore, the aim of this study was to investigate the degradation of organic matter and the generation of water during the sewage sludge bio-drying process. To accomplish this, a bio-drying experiment was conducted and the data were analyzed using the water mass balance equation. The bio-drying process was conducted using an auto-control technology for 20 d, during which the pile was aerated intermittently using an air blower. In addition, the pile was turned on the 9th, 12th, 15th and 18th day. The overall process consisted of 4 phases which in turn were the temperature increasing phase, the first thermophilic phase (>50℃ ), the second thermophilic phase, and the cooling phase ( the temperature increasing phase > the second thermophilic phase > the cooling phase. The dynamic variations in water generation were as follows: during the first thermophilic phase, water generation peaked at 9.40 kg/(t·d) on the 3rd day, while its mean value in the first thermophilic phase was 6.51 kg/(t·d). After the first even turning on the 9th day, the water generation increased to its second peak of 8.40 kg/(t·d) and the bio-drying pile entered its second thermophilic phase. From the 9th day to the 20th day, the water generation showed a decline. When the bio-drying process ended on the 20

  2. Dry cell battery poisoning

    Science.gov (United States)

    Batteries - dry cell ... Acidic dry cell batteries contain: Manganese dioxide Ammonium chloride Alkaline dry cell batteries contain: Sodium hydroxide Potassium hydroxide Lithium dioxide dry cell batteries ...

  3. Electro-dry-adhesion.

    Science.gov (United States)

    Krahn, Jeffrey; Menon, Carlo

    2012-03-27

    This work presents novel conductive bioinspired dry adhesives with mushroom caps that enable the use of a synergistic combination of electrostatic and van der Waals forces (electro-dry-adhesion). An increase in shear adhesion bond strength of up to 2046% on a wide range of materials is measured when a maximum electrical field of 36.4 V μm(-1) is applied. A suction effect, due to the shape of the dry adhesive fibers, on overall adhesion was not noted for electro-dry-adhesives when testing was performed at both atmospheric and reduced pressure. Utilization of electrostatics to apply a preloading force to dry adhesive fiber arrays allows increased adhesion even after electrostatic force generation has been halted by ensuring the close contact necessary for van der Waals forces to be effective. A comparison is made between self-preloading of the electro-dry-adhesives and the direct application of a normal preloading pressure resulting in nearly the same shear bond strength with an applied voltage of 3.33 kV on the same sample.

  4. Dry Mouth

    Science.gov (United States)

    ... Use a fluoride rinse or brush-on fluoride gel before bedtime. See your dentist at least twice yearly to have your teeth examined and plaque removed, to help prevent tooth decay. Several herbal remedies have been used historically to treat dry ...

  5. What Is Dry Eye?

    Medline Plus

    Full Text Available ... Causes of Dry Eye Dry Eye Treatment What Is Dry Eye? Written By: Kierstan Boyd Reviewed By: ... your eyes do not produce enough tears, it is called dry eye. Dry eye is also when ...

  6. Smooth/rough layering in liquid-crystalline/gel state of dry phospholipid film, in relation to its ability to generate giant vesicles

    CERN Document Server

    Hishida, M; Yoshikawa, K; Hishida, Mafumi; Seto, Hideki; Yoshikawa, Kenichi

    2005-01-01

    Morphological changes in a dry phospholipid film on a solid substrate were studied below and above the main transition temperature, between the gel and liquid-crystalline phases by phase-contrast microscopy and AFM. A Phospholipid film in the liquid-crystalline phase exhibits flat, smooth layering, whereas that in the gel phase shows rough, random layering. These film morphologies are discussed in relation to the ability to form giant vesicles through the natural swelling method.

  7. Archived neonatal dried blood spot samples can be used for accurate whole genome and exome-targeted next-generation sequencing

    DEFF Research Database (Denmark)

    Hollegaard, Mads Vilhelm; Grauholm, Jonas; Nielsen, Ronni;

    2013-01-01

    Dried blood spot samples (DBSS) have been collected and stored for decades as part of newborn screening programmes worldwide. Representing almost an entire population under a certain age and collected with virtually no bias, the Newborn Screening Biobanks are of immense value in medical studies......, for example, to examine the genetics of various disorders. We have previously demonstrated that DNA extracted from a fraction (2×3.2mm discs) of an archived DBSS can be whole genome amplified (wgaDNA) and used for accurate array genotyping. However, until now, it has been uncertain whether wgaDNA from DBSS...... can be used for accurate whole genome sequencing (WGS) and exome sequencing (WES). This study examined two individuals represented by three different types of samples each: whole-blood (reference samples), 3-year-old DBSS spotted with reference material (refDBSS), and 27- to 29-year-old archived...

  8. What Is Dry Eye?

    Medline Plus

    Full Text Available ... Eye Symptoms Causes of Dry Eye Dry Eye Treatment What Is Dry Eye? Written By: Kierstan Boyd ... your vision. Privacy Policy Related New Dry Eye Treatment is a Tear-Jerker Jul 21, 2017 Three ...

  9. What Is Dry Eye?

    Medline Plus

    Full Text Available ... Español Eye Health / Eye Health A-Z Dry Eye Sections What Is Dry Eye? Dry Eye Symptoms ... Dry Eye Dry Eye Treatment What Is Dry Eye? Written By: Kierstan Boyd Reviewed By: Brenda Pagan- ...

  10. What Is Dry Eye?

    Medline Plus

    Full Text Available ... Español Eye Health / Eye Health A-Z Dry Eye Sections What Is Dry Eye? Dry Eye Symptoms ... Dry Eye Dry Eye Treatment What Is Dry Eye? Leer en Español: ¿Qué Es el Ojo Seco? ...

  11. Environmental impact of rejected materials generated in organic fraction of municipal solid waste anaerobic digestion plants: Comparison of wet and dry process layout.

    Science.gov (United States)

    Colazo, Ana-Belén; Sánchez, Antoni; Font, Xavier; Colón, Joan

    2015-09-01

    Anaerobic digestion of source separated organic fraction of municipal solid waste is an increasing waste valorization alternative instead of incineration or landfilling of untreated biodegradable wastes. Nevertheless, a significant portion of biodegradable wastes entering the plant is lost in pre-treatments and post-treatments of anaerobic digestion facilities together with other improper materials such as plastics, paper, textile materials and metals. The rejected materials lost in these stages have two main implications: (i) less organic material enters to digesters and, as a consequence, there is a loss of biogas production and (ii) the rejected materials end up in landfills or incinerators contributing to environmental impacts such as global warming or eutrophication. The main goals of this study are (i) to estimate potential losses of biogas in the rejected solid materials generated during the pre- and post-treatments of two full-scale anaerobic digestion facilities and (ii) to evaluate the environmental burdens associated to the final disposal (landfill or incineration) of these rejected materials by means of Life Cycle Assessment. This study shows that there is a lost of potential biogas production, ranging from 8% to 15%, due to the loss of organic matter during pre-treatment stages in anaerobic digestion facilities. From an environmental point of view, the Life Cycle Assessment shows that the incineration scenario is the most favorable alternative for eight out of nine impact categories compared with the landfill scenario. The studied impact categories are Climate Change, Fossil depletion, Freshwater eutrophication, Marine eutrophication, Ozone depletion, Particulate matter formation, Photochemical oxidant formation, Terrestrial acidification and Water depletion.

  12. Influence of starter culture and a protease on the generation of ACE-inhibitory and antioxidant bioactive nitrogen compounds in Iberian dry-fermented sausage “salchichón”

    Directory of Open Access Journals (Sweden)

    Margarita Fernández

    2016-03-01

    Full Text Available The effect of the addition of an autochthonous starter culture and the protease EPg222 on the generation of angiotensin-I–converting enzyme (ACE-inhibitory and antioxidant compounds by the dry-fermented sausage “salchichón” was investigated. Sausages were prepared with purified EPg222 and Pediococcus acidilactici MS200 and Staphylococcus vitulus RS34 as the starter culture (P200S34, separately and together, ripened for 90 days, and compared to a control batch. Among the ripening time points (20, 35, 65, 90 days studied, batches inoculated with EPg222 had higher nitrogen compound concentrations at 63 days of ripening. ACE-inhibitory and antioxidant activities were also highest in both batches with EPg222 at 63 days of ripening, and these activities were stable in most cases after in vitro simulated gastrointestinal digestion. These activities were correlated with the most relevant compounds detected by HLPC-ESI-MS. The principal components analysis (PCA linked the P200S34 + EPg222 batch with the major compounds identified. The antioxidant activity was higher at 63 days of ripening, especially in highly proteolytic batches, such as P200S34 + EPg222. The ACE-inhibitory activity was not associated with any of the major compounds. The use of the enzyme EPg222 in association with the starter culture P200S34 in the preparation of dry-cured meat products could be of great importance due to their demonstrated ability to produce compounds with high biological activity, such as ACE-inhibitory and antioxidant activity.

  13. Influence of starter culture and a protease on the generation of ACE-inhibitory and antioxidant bioactive nitrogen compounds in Iberian dry-fermented sausage "salchichón".

    Science.gov (United States)

    Fernández, Margarita; Benito, María J; Martín, Alberto; Casquete, Rocío; Córdoba, Juan J; Córdoba, María G

    2016-03-01

    The effect of the addition of an autochthonous starter culture and the protease EPg222 on the generation of angiotensin-I-converting enzyme (ACE)-inhibitory and antioxidant compounds by the dry-fermented sausage "salchichón" was investigated. Sausages were prepared with purified EPg222 and Pediococcus acidilactici MS200 and Staphylococcus vitulus RS34 as the starter culture (P200S34), separately and together, ripened for 90 days, and compared to a control batch. Among the ripening time points (20, 35, 65, 90 days) studied, batches inoculated with EPg222 had higher nitrogen compound concentrations at 63 days of ripening. ACE-inhibitory and antioxidant activities were also highest in both batches with EPg222 at 63 days of ripening, and these activities were stable in most cases after in vitro simulated gastrointestinal digestion. These activities were correlated with the most relevant compounds detected by HLPC-ESI-MS. The principal components analysis (PCA) linked the P200S34 + EPg222 batch with the major compounds identified. The antioxidant activity was higher at 63 days of ripening, especially in highly proteolytic batches, such as P200S34 + EPg222. The ACE-inhibitory activity was not associated with any of the major compounds. The use of the enzyme EPg222 in association with the starter culture P200S34 in the preparation of dry-cured meat products could be of great importance due to their demonstrated ability to produce compounds with high biological activity, such as ACE-inhibitory and antioxidant activity.

  14. Hot-dry-rock feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    1981-08-01

    The hot-dry-rock project tasks are covered as follows: hot-dry-rock reservoir; generation facilities; water resources; transmission requirements; environmental issues; government and community institutional factors; leasing, ownership and management of facilities; regulations, permits, and laws; and financial considerations. (MHR)

  15. Dry EEG Electrodes

    Directory of Open Access Journals (Sweden)

    M. A. Lopez-Gordo

    2014-07-01

    Full Text Available Electroencephalography (EEG emerged in the second decade of the 20th century as a technique for recording the neurophysiological response. Since then, there has been little variation in the physical principles that sustain the signal acquisition probes, otherwise called electrodes. Currently, new advances in technology have brought new unexpected fields of applications apart from the clinical, for which new aspects such as usability and gel-free operation are first order priorities. Thanks to new advances in materials and integrated electronic systems technologies, a new generation of dry electrodes has been developed to fulfill the need. In this manuscript, we review current approaches to develop dry EEG electrodes for clinical and other applications, including information about measurement methods and evaluation reports. We conclude that, although a broad and non-homogeneous diversity of approaches has been evaluated without a consensus in procedures and methodology, their performances are not far from those obtained with wet electrodes, which are considered the gold standard, thus enabling the former to be a useful tool in a variety of novel applications.

  16. Dry ice blasting

    Science.gov (United States)

    Lonergan, Jeffrey M.

    1992-04-01

    As legal and societal pressures against the use of hazardous waste generating materials has increased, so has the motivation to find safe, effective, and permanent replacements. Dry ice blasting is a technology which uses CO2 pellets as a blasting medium. The use of CO2 for cleaning and stripping operations offers potential for significant environmental, safety, and productivity improvements over grit blasting, plastic media blasting, and chemical solvent cleaning. Because CO2 pellets break up and sublime upon impact, there is no expended media to dispose of. Unlike grit or plastic media blasting which produce large quantities of expended media, the only waste produced by CO2 blasting is the material removed. The quantity of hazardous waste produced, and thus the cost of hazardous waste disposal is significantly reduced.

  17. On the nature of rainfall in dry climate: Space-time patterns of convective rain cells over the Dead Sea region and their relations with synoptic state and flash flood generation

    Science.gov (United States)

    Belachsen, Idit; Marra, Francesco; Peleg, Nadav; Morin, Efrat

    2017-04-01

    Space-time patterns of rainfall are important climatic characteristics that influence runoff generation and flash flood magnitude. Their derivation requires high-resolution measurements to adequately represent the rainfall distribution, and is best provided by remote sensing tools. This need is further emphasized in dry climate regions, where rainfall is scarce and, often, local and highly variable. Our research is focused on understanding the nature of rainfall events in the dry Dead Sea region (Eastern Mediterranean) by identifying and characterizing the spatial structure and the dynamics of convective storm cores (known as rain cells). To do so, we take advantage of 25 years of corrected and gauge-adjusted weather radar data. A statistical analysis of convective rain-cells spatial and temporal characteristics was performed with respect to synoptic pattern, geographical location, and flash flood generation. Rain cells were extracted from radar data using a cell segmentation method and a tracking algorithm and were divided into rain events. A total of 10,500 rain cells, 2650 cell tracks and 424 rain events were elicited. Rain cell properties, such as mean areal and maximal rain intensity, area, life span, direction and speed, were derived. Rain events were clustered, according to several ERA-Interim atmospheric parameters, and associated with three main synoptic patterns: Cyprus Low, Low to the East of the study region and Active Red Sea Trough. The first two originate from the Mediterranean Sea, while the third is an extension of the African monsoon. On average, the convective rain cells in the region are 90 km2 in size, moving from West to East in 13 ms-1 and living 18 minutes. Several significant differences between rain cells of the various synoptic types were observed. In particular, Active Red Sea Trough rain cells are characterized by higher rain intensities and lower speeds, suggesting a higher flooding potential for small catchments. The north

  18. Energy Efficient Textile Drying

    OpenAIRE

    Brunzell, Lena

    2006-01-01

    Traditionally, textiles were dried outdoors with the wind and the sun enhancing the drying process. Tumble dryers offer a fast and convenient way of drying textiles independent of weather conditions. Tumble dryers, however, consume large amounts of electrical energy. Over 4 million tumble dryers are sold each year in Europe and a considerable amount of energy is used for drying of clothes. Increasing energy costs and the awareness about environmental problems related to a large energy use has...

  19. Dry vacuum pumps

    Science.gov (United States)

    Sibuet, R.

    2008-05-01

    For decades and for ultimate pressure below 1 mbar, oil-sealed Rotary Vane Pumps have been the most popular solution for a wide range of vacuum applications. In the late 80ies, Semiconductor Industry has initiated the development of the first dry roughing pumps. Today SC applications are only using dry pumps and dry pumping packages. Since that time, pumps manufacturers have developed dry vacuum pumps technologies in order to make them attractive for other applications. The trend to replace lubricated pumps by dry pumps is now spreading over many other market segments. For the Semiconductor Industry, it has been quite easy to understand the benefits of dry pumps, in terms of Cost of Ownership, process contamination and up-time. In this paper, Technology of Dry pumps, its application in R&D/industries, merits over conventional pumps and future growth scope will be discussed.

  20. Drying and energy technologies

    CERN Document Server

    Lima, A

    2016-01-01

    This book provides a comprehensive overview of essential topics related to conventional and advanced drying and energy technologies, especially motivated by increased industry and academic interest. The main topics discussed are: theory and applications of drying, emerging topics in drying technology, innovations and trends in drying, thermo-hydro-chemical-mechanical behaviors of porous materials in drying, and drying equipment and energy. Since the topics covered are inter- and multi-disciplinary, the book offers an excellent source of information for engineers, energy specialists, scientists, researchers, graduate students, and leaders of industrial companies. This book is divided into several chapters focusing on the engineering, science and technology applied in essential industrial processes used for raw materials and products.

  1. Ambient Dried Aerogels

    Science.gov (United States)

    Jones, Steven M.; Paik, Jong-Ah

    2013-01-01

    A method has been developed for creating aerogel using normal pressure and ambient temperatures. All spacecraft, satellites, and landers require the use of thermal insulation due to the extreme environments encountered in space and on extraterrestrial bodies. Ambient dried aerogels introduce the possibility of using aerogel as thermal insulation in a wide variety of instances where supercritically dried aerogels cannot be used. More specifically, thermoelectric devices can use ambient dried aerogel, where the advantages are in situ production using the cast-in ability of an aerogel. Previously, aerogels required supercritical conditions (high temperature and high pressure) to be dried. Ambient dried aerogels can be dried at room temperature and pressure. This allows many materials, such as plastics and certain metal alloys that cannot survive supercritical conditions, to be directly immersed in liquid aerogel precursor and then encapsulated in the final, dried aerogel. Additionally, the metalized Mylar films that could not survive the previous methods of making aerogels can survive the ambient drying technique, thus making multilayer insulation (MLI) materials possible. This results in lighter insulation material as well. Because this innovation does not require high-temperature or high-pressure drying, ambient dried aerogels are much less expensive to produce. The equipment needed to conduct supercritical drying costs many tens of thousands of dollars, and has associated running expenses for power, pressurized gasses, and maintenance. The ambient drying process also expands the size of the pieces of aerogel that can be made because a high-temperature, high-pressure system typically has internal dimensions of up to 30 cm in diameter and 60 cm in height. In the case of this innovation, the only limitation on the size of the aerogels produced would be in the ability of the solvent in the wet gel to escape from the gel network.

  2. Ocean Dynamics: Vietnam DRI

    Science.gov (United States)

    2014-09-30

    Dynamics: Vietnam DRI Robert Pinkel Marine Physical Laboratory Scripps Institution of Oceanography La Jolla California 92093-0213 Phone: (858) 534...DATES COVERED 00-00-2014 to 00-00-2014 4. TITLE AND SUBTITLE Ocean Dynamics: Vietnam DRI 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM...cycle.. The Thorpe-scale estimates are local to Site III. South China Sea Process Cruise 2014 Under Vietnam DRI funding, Researcher Drew Lucas

  3. Forward Osmosis Brine Drying

    Science.gov (United States)

    Flynn, Michael; Shaw, Hali; Hyde, Deirdre; Beeler, David; Parodi, Jurek

    2015-01-01

    The Forward Osmosis Brine Drying (FOBD) system is based on a technique called forward osmosis (FO). FO is a membrane-based process where the osmotic potential between brine and a salt solution is equalized by the movement of water from the brine to the salt solution. The FOBD system is composed of two main elements, the FO bag and the salt regeneration system. This paper discusses the results of testing of the FO bag to determine the maximum water recovery ratio that can be attained using this technology. Testing demonstrated that the FO bag is capable of achieving a maximum brine water recovery ratio of the brine of 95%. The equivalent system mass was calculated to be 95 kg for a feed similar to the concentrated brine generated on the International Space Station and 86 kg for an Exploration brine. The results have indicated that the FOBD can process all the brine for a one year mission for between 11% to 10% mass required to bring the water needed to make up for water lost in the brine if not recycled. The FOBD saves 685 kg and when treating the International Space Station brine and it saves 829 kg when treating the Exploration brine. It was also demonstrated that saturated salt solutions achieve a higher water recovery ratios than solids salts do and that lithium chloride achieved a higher water recovery ratio than sodium chloride.

  4. Dry etching for microelectronics

    CERN Document Server

    Powell, RA

    1984-01-01

    This volume collects together for the first time a series of in-depth, critical reviews of important topics in dry etching, such as dry processing of III-V compound semiconductors, dry etching of refractory metal silicides and dry etching aluminium and aluminium alloys. This topical format provides the reader with more specialised information and references than found in a general review article. In addition, it presents a broad perspective which would otherwise have to be gained by reading a large number of individual research papers. An additional important and unique feature of this book

  5. What Is Dry Eye?

    Medline Plus

    Full Text Available ... Tips & Prevention News Ask an Ophthalmologist Patient Stories Español Eye Health / Eye Health A-Z Dry Eye ... Eye Treatment What Is Dry Eye? Leer en Español: ¿Qué Es el Ojo Seco? Written By: Kierstan ...

  6. Dry imaging cameras

    Directory of Open Access Journals (Sweden)

    I K Indrajit

    2011-01-01

    Full Text Available Dry imaging cameras are important hard copy devices in radiology. Using dry imaging camera, multiformat images of digital modalities in radiology are created from a sealed unit of unexposed films. The functioning of a modern dry camera, involves a blend of concurrent processes, in areas of diverse sciences like computers, mechanics, thermal, optics, electricity and radiography. Broadly, hard copy devices are classified as laser and non laser based technology. When compared with the working knowledge and technical awareness of different modalities in radiology, the understanding of a dry imaging camera is often superficial and neglected. To fill this void, this article outlines the key features of a modern dry camera and its important issues that impact radiology workflow.

  7. Stripping with dry ice

    Science.gov (United States)

    Malavallon, Olivier

    1995-04-01

    Mechanical-type stripping using dry ice (solid CO2) consists in blasting particles of dry ice onto the painted surface. This surface can be used alone or in duplex according to type of substrate to be treated. According to operating conditions, three physical mechanisms may be involved when blasting dry ice particles onto a paint system: thermal shock, differential thermal contraction, and mechanical shock. The blast nozzle, nozzle travel speed, blast angle, stripping distance, and compressed air pressure and media flow rate influence the stripping quality and the uniformity and efficiency obtained.

  8. High strength air-dried aerogels

    Science.gov (United States)

    Coronado, Paul R.; Satcher, Jr., Joe H.

    2012-11-06

    A method for the preparation of high strength air-dried organic aerogels. The method involves the sol-gel polymerization of organic gel precursors, such as resorcinol with formaldehyde (RF) in aqueous solvents with R/C ratios greater than about 1000 and R/F ratios less than about 1:2.1. Using a procedure analogous to the preparation of resorcinol-formaldehyde (RF) aerogels, this approach generates wet gels that can be air dried at ambient temperatures and pressures. The method significantly reduces the time and/or energy required to produce a dried aerogel compared to conventional methods using either supercritical solvent extraction. The air dried gel exhibits typically less than 5% shrinkage.

  9. [Little Dry Creek Drainage

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Map of the drainage boundary, direction of flow, canals and ditches, and streets for the drainage study plan and profile for Little Dry Creek sub area in the North...

  10. What Is Dry Eye?

    Medline Plus

    Full Text Available ... information about eye health and preserving your vision. Privacy Policy Related New Dry Eye Treatment is a ... the Academy Financial Relationships with Industry Medical Disclaimer Privacy Policy Terms of Service For Advertisers For Media ...

  11. Cold Vacuum Drying Facility

    Data.gov (United States)

    Federal Laboratory Consortium — Located near the K-Basins (see K-Basins link) in Hanford's 100 Area is a facility called the Cold Vacuum Drying Facility (CVDF).Between 2000 and 2004, workers at the...

  12. What Is Dry Eye?

    Medline Plus

    Full Text Available ... Pediatric Ophthalmology Education Center Oculofacial Plastic Surgery Center Laser Surgery Education Center Redmond Ethics Center Global Ophthalmology Guide Eye ... What Is Dry Eye? Leer en Español: ¿Qué ...

  13. What Is Dry Eye?

    Medline Plus

    Full Text Available ... Dry Eye Symptoms Related Ask an Ophthalmologist Answers Can a six-month dissolvable punctal plug be removed ... insert a permanent punctal plug? Sep 12, 2017 Can you explain why I have halos and blurry ...

  14. What Is Dry Eye?

    Medline Plus

    Full Text Available ... Pediatric Ophthalmology Education Center Oculofacial Plastic Surgery Center Laser Surgery Education Center Redmond Ethics Center Global Ophthalmology Guide ... What Is Dry Eye? Written By: Kierstan Boyd ...

  15. What Is Dry Eye?

    Medline Plus

    Full Text Available ... about eye health and preserving your vision. Privacy Policy Related New Dry Eye Treatment is a Tear- ... Academy Financial Relationships with Industry Medical Disclaimer Privacy Policy Terms of Service For Advertisers For Media Ophthalmology ...

  16. SPME-GC-MS versus Selected Ion Flow Tube Mass Spectrometry (SIFT-MS) analyses for the study of volatile compound generation and oxidation status during dry fermented sausage processing.

    Science.gov (United States)

    Olivares, Alicia; Dryahina, Kseniya; Navarro, José Luis; Smith, David; Spanĕl, Patrik; Flores, Mónica

    2011-03-09

    The use of selected ion flow tube mass spectrometry (SIFT-MS) and gas chromatography-mass spectrometry together with solid phase microextraction (GC-MS-SPME) has been compared in the analysis of volatile compounds during dry fermented sausage processing. Thus, the headspace (HS) of samples of dry fermented sausages with different fat contents was analyzed during their manufacture using both techniques, and significant and positive correlations were found between SIFT-MS and SPME-GC-MS measurements for the compounds pentanal, hexanal, 2-heptenal, octanal, 2-nonenal, 2-butanone, 2-pentanone, ethanol, acetic acid, and hexanoic acid. The oxidative status of fermented sausages during processing was also evaluated, and a significant correlation was obtained between the HS concentration of lipid autoxidation volatile compounds measured by SIFT-MS and SPME-GC-MS and the level of thiobarbituric acid reactive substances (TBARS) in the sausage. The hexanal measured by SIFT-MS resulted in a higher correlation coefficient (r = 0.936) than that obtained using SPME-GC-MS (r = 0.927). SIFT-MS is shown to be a fast, real time analytical technique for monitoring changes in the profile of volatile compounds in dry fermented sausages during processing and a useful tool to evaluate the oxidative status of meat products.

  17. Autochthonous "Bjelovars dried cheese"

    Directory of Open Access Journals (Sweden)

    Slavko Kirin

    2006-12-01

    Full Text Available «Dried cheese» is in autochthonous group of Bjelovar region cheeses which is still produced in rural domestic scale. The name of cheese originates from production procedure - drying for longer or shorter period in airy place after which the cheese is smoked, or is smoked only without drying. This type of cheese is produced in whole central region of Croatia which includes Međimurje, Podravina, Bilogora; Moslavina, Posavina and region around the capital. The aim of this paper is to describe and determine sensory, chemical and microbiological composition to determine its characteristics and production standards. As standards for sensory properties following characteristics can be used: a Outer shape: dimensions: diameter: 140-145 mm, height: 58-61 mm, mass: 700-750 g, equal, rounded shape, smooth skin, equal colour; b Consistency: easily cut, elastic, soft; c Cut: nicely combined white body, few improper holes of equal size; d Odour: pleasant milky acid odour, fairly smoky; e Taste: Fairly milky acidic taste, medium salty, fairly smoky taste. Depending on fat in dry matter content and water content in non fat dry matter, analyzed samples can be characterized as quarter fat, soft and semidry cheese. Higher acidity and saltiness was determined in some samples, microbiological analyses has shown that the most common contaminants are yeasts and moulds.

  18. Drying of Malaysian Capsicum annuum L. (Red Chili) Dried by Open and Solar Drying

    OpenAIRE

    Ahmad Fudholi; Mohd Yusof Othman; Mohd Hafidz Ruslan; Kamaruzzaman Sopian

    2013-01-01

    This study evaluated the performance of solar drying in the Malaysian red chili (Capsicum annuum L.). Red chilies were dried down from approximately 80% (wb) to 10% (wb) moisture content within 33 h. The drying process was conducted during the day, and it was compared with 65 h of open sun drying. Solar drying yielded a 49% saving in drying time compared with open sun drying. At the average solar radiation of 420 W/m2 and air flow rate of 0.07 kg/s, the collector, drying system, and pickup de...

  19. Drying of Concrete

    DEFF Research Database (Denmark)

    Hansen, Kurt Kielsgaard; Geiker, Mette Rica; Nygaard, Peter Vagn;

    2002-01-01

    Estimated and measured relative humidity (RH) change during drying are compared for two concretes, 1: w/c=0.46 and 2: w/(c+0.5fa+2sf)=0.50. The estimations were undertaken by means of the Swedish program TorkaS 1.0. Measurements were performed by RH-sensors type Humi-Guard. Drying of 150 mm thick...... samples from sides at 60% RH and 22 °C took place from 4 to 56 days after casting. At the end of the drying period the measured RH was about 4% lower than the estimated RH at 1/5th depth from the exposed surface for both concretes. In the middle of the samples, the measured RH of concretes 1 and 2 were 2...

  20. Drying of Concrete

    DEFF Research Database (Denmark)

    Hansen, Kurt Kielsgaard; Geiker, Mette Rica; Nygaard, Peter Vagn

    2002-01-01

    Estimated and measured relative humidity (RH) change during drying are compared for two concretes, 1: w/c=0.46 and 2: w/(c+0.5fa+2sf)=0.50. The estimations were undertaken by means of the Swedish program TorkaS 1.0. Measurements were performed by RH-sensors type Humi-Guard. Drying of 150 mm thick...... samples from sides at 60% RH and 22 °C took place from 4 to 56 days after casting. At the end of the drying period the measured RH was about 4% lower than the estimated RH at 1/5th depth from the exposed surface for both concretes. In the middle of the samples, the measured RH of concretes 1 and 2 were 2...

  1. Trigger Point Dry Needling.

    Science.gov (United States)

    2017-03-01

    Increasingly, physical therapists in the United States and throughout the world are using dry needling to treat musculoskeletal pain, even though this treatment has been a controversial addition to practice. To better generalize to physical therapy practice the findings about dry needling thus far, the authors of a study published in the March 2017 issue of JOSPT identified the need for a systematic review examining the effectiveness of dry needling performed by physical therapists on people with musculoskeletal pain. Their review offers a meta-analysis of data from several included studies and assesses the evidence for risks of bias. J Orthop Sports Phys Ther 2017;47(3):150. doi:10.2519/jospt.2017.0502.

  2. Magnetically responsive dry fluids

    Science.gov (United States)

    Sousa, Filipa L.; Bustamante, Rodney; Millán, Angel; Palacio, Fernando; Trindade, Tito; Silva, Nuno J. O.

    2013-07-01

    Ferrofluids and dry magnetic particles are two separate classes of magnetic materials with specific niche applications, mainly due to their distinct viscosity and interparticle distances. For practical applications, the stability of these two properties is highly desirable but hard to achieve. Conceptually, a possible solution to this problem would be encapsulating the magnetic particles but keeping them free to rotate inside a capsule with constant interparticle distances and thus shielded from changes in the viscosity of the surrounding media. Here we present an example of such materials by the encapsulation of magnetic ferrofluids into highly hydrophobic silica, leading to the formation of dry ferrofluids, i.e., a material behaving macroscopically as a dry powder but locally as a ferrofluid where magnetic nanoparticles are free to rotate in the liquid.Ferrofluids and dry magnetic particles are two separate classes of magnetic materials with specific niche applications, mainly due to their distinct viscosity and interparticle distances. For practical applications, the stability of these two properties is highly desirable but hard to achieve. Conceptually, a possible solution to this problem would be encapsulating the magnetic particles but keeping them free to rotate inside a capsule with constant interparticle distances and thus shielded from changes in the viscosity of the surrounding media. Here we present an example of such materials by the encapsulation of magnetic ferrofluids into highly hydrophobic silica, leading to the formation of dry ferrofluids, i.e., a material behaving macroscopically as a dry powder but locally as a ferrofluid where magnetic nanoparticles are free to rotate in the liquid. Electronic supplementary information (ESI) available. See DOI: 10.1039/c3nr01784b

  3. Properties of Spray Dried Food and Spray Drying Characteristics

    Science.gov (United States)

    Katoh, Fumio

    The following conclusions are obtained, studying properties of spray dried food and drying characteristics. (a) Dried particles are similar to spray droplets in size distribution (y=2.5), and particle count distribution is arranged as (dn/dx = ae-bx). (b) The ratio of the particle diameters before and after drying is calculated with moisture before and after drying, and porosity is given as (εp = ww4). (c) The standard drying method is presented to evaluate accurately drying problems at a certain standard. (d) Equilibrium moisture at 20 up to 100°C are summarized in terms of adsorption potential. (e) It makes clear that calulation based on the theory of residence time and drying time represents well complex spray drying characteristics.

  4. What Is Dry Eye?

    Medline Plus

    Full Text Available ... Tips & Prevention News Ask an Ophthalmologist Patient Stories Español Eye Health / Eye Health A-Z Dry Eye ... when I sleep? Feb 10, 2016 Leer en Español: ¿Qué Es el Ojo Seco? Find an Ophthalmologist ...

  5. “南海挑战”号坞修及主电站国产化方案的技术创新%Technical Renovation in the Dry Dock Repair of Nanhai-Tiaozhan FPS and Its Power Generator Nationalization

    Institute of Scientific and Technical Information of China (English)

    冒家友; 高奇; 侴岩

    2014-01-01

    “南海挑战”号FPS干坞大修过程中成功解决了安全、质量、进度及费用等难题,攻克了满堂承重脚手架搭拆、桩腿修复、驻坞、倾斜试验等难关。介绍坞修工程子项目的流花电站扩容的原油主电站国产化方案,突破了机组倾斜角特殊要求、机组排放新要求、平台空间限制及电站并网等难关。%In the dry dock repairing project of "Nanhai Tiaozhan"FPS, the challenges from safety , quality, schedule and cost are overcome .New solutions are employed to solve the problems such as full scale load bearing scaffolding , column pitting repair , multiple dry dock flooding solution , inclination test .The plan of upgrading the FPS power generator sets with nationalized brand in the dry dock program are introduced , including special ABS requirement on inclination angle; new rules for emission control;space limitation and different brand and power synchronization .

  6. Infrared Drying Parameter Optimization

    Science.gov (United States)

    Jackson, Matthew R.

    In recent years, much research has been done to explore direct printing methods, such as screen and inkjet printing, as alternatives to the traditional lithographic process. The primary motivation is reduction of the material costs associated with producing common electronic devices. Much of this research has focused on developing inkjet or screen paste formulations that can be printed on a variety of substrates, and which have similar conductivity performance to the materials currently used in the manufacturing of circuit boards and other electronic devices. Very little research has been done to develop a process that would use direct printing methods to manufacture electronic devices in high volumes. This study focuses on developing and optimizing a drying process for conductive copper ink in a high volume manufacturing setting. Using an infrared (IR) dryer, it was determined that conductive copper prints could be dried in seconds or minutes as opposed to tens of minutes or hours that it would take with other drying devices, such as a vacuum oven. In addition, this study also identifies significant parameters that can affect the conductivity of IR dried prints. Using designed experiments and statistical analysis; the dryer parameters were optimized to produce the best conductivity performance for a specific ink formulation and substrate combination. It was determined that for an ethylene glycol, butanol, 1-methoxy 2- propanol ink formulation printed on Kapton, the optimal drying parameters consisted of a dryer height of 4 inches, a temperature setting between 190 - 200°C, and a dry time of 50-65 seconds depending on the printed film thickness as determined by the number of print passes. It is important to note that these parameters are optimized specifically for the ink formulation and substrate used in this study. There is still much research that needs to be done into optimizing the IR dryer for different ink substrate combinations, as well as developing a

  7. Quality of dry ginger (Zingiber officinale) by different drying methods.

    Science.gov (United States)

    E, Jayashree; R, Visvanathan; T, John Zachariah

    2014-11-01

    Ginger rhizomes sliced to various lengths of 5, 10, 15, 20, 30, 40, 50 mm and whole rhizomes were dried from an initial moisture content of 81.3 % to final moisture content of less than 10 % by various drying methods like sun drying, solar tunnel drying and cabinet tray drying at temperatures of 50, 55, 60 and 65 °C. Slicing of ginger rhizomes significantly reduced the drying time of ginger in all the drying methods. It was observed that drying of whole ginger rhizomes under sun took the maximum time (9 days) followed by solar tunnel drying (8 days). Significant reduction in essential oil and oleoresin content of dry ginger was found as the slice length decreased. The important constituents of ginger essential oil like zingiberene, limonene, linalool, geraniol and nerolidol as determined using a gas chromatography was also found to decrease during slicing and as the drying temperature increased. The pungency constituents in the oleoresin of ginger like total gingerols and total shogoals as determined using a reverse phase high performance liquid chromatography also showed a decreasing trend on slicing and with the increase in drying temperature. It was observed from the drying studies that whole ginger rhizomes dried under sun drying or in a solar tunnel drier retained the maximum essential oil (13.9 mg/g) and oleoresin content (45.2 mg/g) of dry ginger. In mechanical drying, the drying temperature of 60 °C was considered optimum however there was about 12.2 % loss in essential oil at this temperature.

  8. Hot dry rock geothermal energy

    Science.gov (United States)

    Heiken, G.; Murphy, H.; Nunz, G.; Potter, R.

    1981-08-01

    Man-made geothermal systems are discussed which make it possible to extract heat from hot rocks in areas where natural fluids are insufficient for the development of hydrothermal energy. The location and magnitude of high- and low-temperature geothermal resources in the USA for such hot dry rock (HDR) systems are examined. An HDR concept is described in which water is injected into one of two nearly parallel wells connected at depth by man-made fractures; the injected water circulates through the fracture system, where it is heated by conduction from the hot rock, and hot fluid, which can be used for heating or for electric power generation, rises through the second well. Some heat-extraction experiments using the described concept are reviewed which are being conducted in a complex volcanic field in New Mexico. The economics of HDR energy is evaluated.

  9. Study on drying rate in contact drying with flexible screen

    Institute of Scientific and Technical Information of China (English)

    王伟宏; 陆仁书; 张显权

    2000-01-01

    The moisture contents (MC) of popular veneers were tested in Composition Board Laboratory of Northeast Forestry University by contact drying with flexible screen. The influence factors considered included temperature, initial moisture contents (IMC), and veneer thickness. Veneer-drying laws under different hot press conditions were analyzed. The results showed that the drying rate increased with temperature rising. 160℃ was considered to be more efficient than 140℃ and 180℃ because excessive high temperature has no significant contribution to drying rate. IMC had significant effect on drying rate. The veneer with high IMC had a higher drying rate at above fiber saturation point (FSP) and a lower drying rate at below FSP, compared to the veneer with low IMC. Average drying rate also varied with thickness in power law.

  10. Dry alcohol production plant

    Directory of Open Access Journals (Sweden)

    Stanković Mirjana S.

    2003-01-01

    Full Text Available The IGPC Engineering Department designed basic projects for dry alcohol production plant, using technology developed in the IGPC laboratories. Several projects were completed: technological, machine, electrical, automation. On the basis of these projects a production plant with a capacity of 40 m3/y was manufactured, at "Zorka Pharma", Šabac in 1995-1996. The product meets all quality demands, as well as environmental regulations. The dry alcohol production process is fully automatized. There is no waste in the process, neither gaseous, nor liquid. The chosen process provides safe operation according to temperature regime and resistance in the pipes, air purification columns and filters. Working at increased pressure is suitable for evaporation and condensation at increased temperatures. The production process can be controlled manually, which is necessary during start-up, and repairs.

  11. An unusually dry story

    Directory of Open Access Journals (Sweden)

    Srinivas Rajagopala

    2015-01-01

    Full Text Available We present a middle-aged woman with a prior history of central nervous system (CNS demyelinating disorder who presented with an acute onset quadriparesis and respiratory failure. The evaluation revealed distal renal tubular acidosis with hypokalemia and medullary nephrocalcinosis. Weakness persisted despite potassium correction, and ongoing evaluation confirmed recurrent CNS and long-segment spinal cord demyelination with anti-aquaporin-4 antibodies. There was no history of dry eyes or dry mouth. Anti-Sjogren′s syndrome A antigen antibodies were elevated, and there was reduced salivary flow on scintigraphy. Coexistent antiphospholipid antibody syndrome with inferior vena cava thrombosis was also found on evaluation. The index patient highlights several rare manifestations of primary Sjogren′s syndrome (pSS as the presenting features and highlights the differential diagnosis of the clinical syndromes in which pSS should be considered in the Intensive Care Unit.

  12. Drying characteristics and kinetics of fluidized bed dried potato

    OpenAIRE

    S.B. BAKAL; K.H. GEDAM; Sharma, G. P.

    2008-01-01

    In developed countries, more than 50% potatoes are consumed as processed products. As drying is the vital phenomenon in processing, it is necessary to investigate the drying characteristics and its kinetics. In this experimental study, drying kinetics of Potato in two different shape of cuboidal & cylindrical with three aspect ratio was investigated as a function of drying conditions. Experiments were conducted using air temperatures of 50, 60 and 70 ºC, at velocity of 7 ms-1. The experimenta...

  13. Dry Eye Syndrome

    Directory of Open Access Journals (Sweden)

    Mohammad-Ali Javadi

    2011-01-01

    Full Text Available Our understanding of keratoconjunctivitis sicca (KCS, also known as dry eye syndrome, has been changed over recent years. Until lately, the condition was thought to be merely due to aqueous tear insufficiency. Today, it is understood that KCS is a multifactorial disorder due to inflammation of the ocular surface and lacrimal gland, neurotrophic deficiency and meibomian gland dysfunction. This change in paradigm has led to the development of new and more effective medications.

  14. Drying of complex suspensions

    OpenAIRE

    Xu, Lei; Bergés, Alexis; Lu, Peter J.; Studart, André R.; Schofield, Andrew B.; Oki, Hidekazu; Davies, Simon; Weitz, David A.

    2010-01-01

    We investigate the 3D structure and drying dynamics of complex mixtures of emulsion droplets and colloidal particles, using confocal microscopy. Air invades and rapidly collapses large emulsion droplets, forcing their contents into the surrounding porous particle pack at a rate proportional to the square of the droplet radius. By contrast, small droplets do not collapse, but remain intact and are merely deformed. A simple model coupling the Laplace pressure to Darcy's law correctly estimates ...

  15. Dry mouth during cancer treatment

    Science.gov (United States)

    ... gov/ency/patientinstructions/000032.htm Dry mouth during cancer treatment To use the sharing features on this page, please enable JavaScript. Some cancer treatments and medicines can cause dry mouth. Symptoms you ...

  16. Nitramine Drying & Fine Grinding Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Nitramine Drying and Fine Grinding Facility provides TACOM-ARDEC with a state-of-the-art facility capable of drying and grinding high explosives (e.g., RDX and...

  17. Fluid flow in drying drops

    NARCIS (Netherlands)

    Gelderblom, H.

    2013-01-01

    When a suspension drop evaporates, it leaves behind a drying stain. Examples of these drying stains encountered in daily life are coffee or tea stains on a table top, mineral rings on glassware that comes out of the dishwasher, or the salt deposits on the streets in winter. Drying stains are also pr

  18. Terrestrial Planets Accreted Dry

    Science.gov (United States)

    Albarede, F.; Blichert-Toft, J.

    2007-12-01

    Plate tectonics shaped the Earth, whereas the Moon is a dry and inactive desert. Mars probably came to rest within the first billion years of its history, and Venus, although internally very active, has a dry inferno for its surface. The strong gravity field of a large planet allows for an enormous amount of gravitational energy to be released, causing the outer part of the planetary body to melt (magma ocean), helps retain water on the planet, and increases the pressure gradient. The weak gravity field and anhydrous conditions prevailing on the Moon stabilized, on top of its magma ocean, a thick buoyant plagioclase lithosphere, which insulated the molten interior. On Earth, the buoyant hydrous phases (serpentines) produced by reactions between the terrestrial magma ocean and the wet impactors received from the outer Solar System isolated the magma and kept it molten for some few tens of million years. The elemental distributions and the range of condensation temperatures show that the planets from the inner Solar System accreted dry. The interior of planets that lost up to 95% of their K cannot contain much water. Foundering of their wet surface material softened the terrestrial mantle and set the scene for the onset of plate tectonics. This very same process may have removed all the water from the surface of Venus 500 My ago and added enough water to its mantle to make its internal dynamics very strong and keep the surface very young. Because of a radius smaller than that of the Earth, not enough water could be drawn into the Martian mantle before it was lost to space and Martian plate tectonics never began. The radius of a planet therefore is the key parameter controlling most of its evolutional features.

  19. Electrohydrodynamic drying of carrot slices.

    Directory of Open Access Journals (Sweden)

    Changjiang Ding

    Full Text Available Carrots have one of the highest levels of carotene, and they are rich in vitamins, fiber and minerals. However, since fresh carrots wilt rapidly after harvest under inappropriate storage conditions, drying has been used to improve their shelf life and retain nutritional quality. Therefore, to further investigate the potential of this method, carrot slices were dried in an EHD system in order to study the effect of different voltages on drying rate. As measures of quality, carotene content and rehydration ratio were, respectively, compared against the conventional oven drying regime. Carotene, the main component of the dried carrot, and rehydration characteristics of the dried product can both indicate quality by physical and chemical changes during the drying process. Mathematical modeling and simulation of drying curves were also performed, using root mean square error, reduced mean square of the deviation and modeling efficiency as the primary criteria to select the equation that best accounts for the variation in the drying curves of the dried samples. Theoretically, the Page model was best suited for describing the drying rate curve of carrot slices at 10kV to 30kV. Experimentally, the drying rate of carrots was notably greater in the EHD system when compared to control, and quality, as determined by carotene content and rehydration ratio, was also improved when compared to oven drying. Therefore, this work presents a facile and effective strategy for experimentally and theoretically determining the drying properties of carrots, and, as a result, it provides deeper insight into the industrial potential of the EHD drying technique.

  20. Solar drying and agribusiness

    Directory of Open Access Journals (Sweden)

    Sebastiana del Monserrate Ruiz Cedeño

    2016-07-01

    Full Text Available Agribusinesses are the livelihoods of rural populations, but when production increase, many products are damaged and lose their commercial value due to lack of conservation treatments at a local level. Agricultural production represents the foundation of economic development of the province of Manabi. A significant level of agricultural products is lost due to lack of conservation technologies. Solar drying is a way of conserving by dehydration of some products such as: vegetables, fruits, aromatic and medicinal plants. This can be achieved by a process of proper conservation that is conducive to reduce losses using technologies easy to build, as are the different types of solar dryers which are already used in different parts of the South American region. This article proposes to introduce solar-drying technology in agricultural areas of the province of Manabi. And thereby achieve the regaining of different products that today are lost, incorporating new and attractive, marketable lines based on agricultural products naturally dehydrated with a high nutritionalvalue, capable of contributing to human health not only in the province but also in the country.

  1. Hot dry rock venture risks investigation:

    Energy Technology Data Exchange (ETDEWEB)

    1988-01-01

    This study assesses a promising resource in central Utah as the potential site of a future commerical hot dry rock (HDR) facility for generating electricity. The results indicate that, if the HDR reservoir productivity equals expectations based on preliminary results from research projects to date, a 50 MWe HDR power facility at Roosevelt Hot Springs could generate power at cost competitive with coal-fired plants. However, it is imperative that the assumed productivity be demonstrated before funds are committed for a commercial facility. 72 refs., 39 figs., 38 tabs.

  2. Dry aging of beef; Review.

    Science.gov (United States)

    Dashdorj, Dashmaa; Tripathi, Vinay Kumar; Cho, Soohyun; Kim, Younghoon; Hwang, Inho

    2016-01-01

    The present review has mainly focused on the specific parameters including aging (aging days, temperature, relative humidity, and air flow), eating quality (flavor, tenderness and juiciness), microbiological quality and economic (shrinkage, retail yields and cost) involved beef dry aging process. Dry aging is the process where beef carcasses or primal cuts are hanged and aged for 28 to 55 d under controlling environment conditions in a refrigerated room with 0° to 4 °C and with relative humidity of 75 to 80 %. However there are various opinions on dry aging procedures and purveyors of such products are passionate about their programs. Recently, there has been an increased interest in dry aging process by a wider array of purveyors and retailers in the many countries. Dry aging process is very costly because of high aging shrinkage (6 to15 %), trims loss (3 to 24 %), risk of contamination and the requirement of highest grades meat with. The packaging in highly moisture-permeable bag may positively impact on safety, quality and shelf stability of dry aged beef. The key effect of dry aging is the concentration of the flavor that can only be described as "dry-aged beef". But the contribution of flavor compounds of proteolysis and lipolysis to the cooked dry aged beef flavor is not fully known. Also there are limited scientific studies of aging parameters on the quality and palatability of dry aged beef.

  3. Dried fruit and dental health.

    Science.gov (United States)

    Sadler, Michèle Jeanne

    2016-12-01

    A comprehensive review of the literature has found that the common perceptions that dried fruits are "sticky", adhere to teeth, and are detrimental to dental health on account of their sugar content are based on weak evidence. There is a lack of good quality scientific data to support restrictive advice for dried fruit intake on the basis of dental health parameters and further research is required. A number of potentially positive attributes for dental health, such as the need to chew dried fruits which encourages salivary flow, and the presence of anti-microbial compounds and of sorbitol, also require investigation to establish the extent of their effects and whether they balance against any potentially negative attributes of dried fruit. Advice on dried fruit consumption should also take account of the nutritional benefits of dried fruit, being high in fibre, low in fat and containing useful levels of micronutrients.

  4. An engineering and economic evaluation of wet and dry pre-fractionation processes for dry-grind ethanol facilities.

    Science.gov (United States)

    Lin, Tao; Rodríguez, Luis F; Li, Changying; Eckhoff, Steven R

    2011-10-01

    An engineering-economic model was developed to compare the profitability of the wet fractionation process, a generic dry fractionation process, and the conventional dry grind process. Under market conditions as of January 2011, only fractionation processes generated a positive cash flow. Reduced unit manufacturing costs and increased ethanol production capacity were two major contributions. Corn and ethanol price sensitivity analysis showed that the wet fractionation process always outperformed a generic dry fractionation process at any scenario considered in this research. A generic dry fractionation process would provide better economic performance than the conventional dry grind process if corn price was low and ethanol price was high. All three processes would perform more resiliently if the DDGS price was determined by its composition. Copyright © 2011 Elsevier Ltd. All rights reserved.

  5. Convective drying of sludge cake

    Science.gov (United States)

    Chen, Jianbo; Peng, Xiaofeng; Xue, Yuan; Lee, Duujong; Chu, Chingping

    2002-08-01

    This paper presented an experimental study on convective drying of waste water sludge collected from Beijing GaoBeiDian Sewage Treatment Plant, particularly on the correlation between the observed shrinkage dynamics of sludge cake and the drying curve. During the initial stage of drying the process resembles to that of a particulate bed, in which moisture diffuses and evaporates at the upper surface. Conventional drying theory assuming a diffusion-evaporating front interprets this period of drying. Consequently, owing to the very large shrinkage ratio of the dried cake, cracks emerges and propagates on and within the cake body, whence inducing evaporating channel that facilitates the water removal. This occurrence compensates the reduction of surface area for evaporation, whence extending the constant-rate period during the test. Afterwards, the cracks meet with each other and form isolated cake piles, while the subsequent drying occur mainly within these piles and the conventional theory fails. The transition between the drying on a plain cake layer and that on the isolated piles demonstrates the need to adopt distinct descriptions on these two regimes of drying for the sludge cake.

  6. High Performance Drying System Using Absorption Temperature Amplifier

    Science.gov (United States)

    Nishimura, Nobuya; Nomura, Tomohiro; Yabushita, Akihiro; Kashiwagi, Takao

    A computer simulation has been developed on transient drying process in order to predict the dynamic thermal performance of a new superheated steam drying system using an absorption type temperature amplifier as a steam superheater. A feature of this drying system is that one can reuse the exhausted superheated stream conventionally discharged from the dryer as a driving heat source for the generator in this heat pump. But in the transient drying process, the evaporation of moisture sharply decreases. Accordingly, it is hardly expected to reuse an exhausted superheated steam as heating source for the generator. 80 the effects of this exhausted superheated steam and of changes in hot water and the cooling water temperatures were mainly investigated checking whether this drying system can be driven directly by the low level energy of sun or waste heat. Furthermore, the system performances of this drying system were evaluated on a qualitative-basis by using the exergy efficiency. The results show that, under the transient drying conditions, the temperature boost of superheated steam is possible at a high temperature and thus the absorption type temperature amplifier can be an effective steam superheater system.

  7. Drying Spirulina with Foam Mat Drying at Medium Temperature

    Directory of Open Access Journals (Sweden)

    Aji Prasetyaningrum

    2012-10-01

    Full Text Available Spirulina is a single cell blue green microalgae (Cyanobacteria containing many Phytonutrients (Beta-carotene, Chlorophyl, Xanthophyl, Phyocianin using as anti-carcinogen in food. Producing dry spirulina by quick drying process at medium temperature is very important to retain the Phytonutrient quality. Currently, the work is still challenging due to the gel formation that block the water diffusion from inside to the surface.  This research studies the performance of foam-mat drying on production of dry spirulina. In this method the spirulina was mixed with foaming agent (glair/egg albumen, popular as white egg at 2.5% by weight at air velocity 2.2 m/sec. Here, the effect of spirulina thickness and operational temperature on drying time and quality (Beta-carotene and color were observed. The drying time was estimated based on the measurement of water content in spirulina versus time. Result showed that the thicker spirulina, the longer drying time. Conversely, the higher operational temperature, faster drying time. At thickness ranging 1-3 mm and operational temperature below 70oC, the quality of spirulina can fit the market requirement

  8. Carrageenan drying with dehumidified air: drying characteristics and product quality

    NARCIS (Netherlands)

    Djaeni, M.; Sasongko, S.B.; Prasetyaningrum, Aji A A.A.; Jin, X.; Boxtel, van A.J.B.

    2012-01-01

    Applying dehumidified air is considered as an option to retain quality in carrageenan drying. This work concerns the effects of operational temperature, air velocity, and carrageenan thickness on the progress of drying and product quality when using dehumidified air. Final product quality and progre

  9. 干气制氢装置低负荷运行时的操作优化%Operation optimization for hydrogen generation unit from dry gas at low load

    Institute of Scientific and Technical Information of China (English)

    王辉; 常永胜

    2012-01-01

    The situation of low load operation of 15 000 m3/h hydrogen generation unit in Qingdao Petrochemical Company was introduced, and the optimized measures on operation parameters and operation method proposed. The prominent problem at low load operation was the heterogeneous distribution and bias flow of medium in reformer tubes. For this reason, measures were adopted including reducing the space velocity and inlet temperature in hydroge-nator, improving the water to carbon ratio in reformer and increasing the hydrogen level added to enhancethe medium flow rate and carry away the excess heat in reformer tubes. In addition, the hydrogen content in the desorbed gas from pressure swing adsorption ( PSA ) should be controlled effectively, the water from middle - temperature shift gas needed to be e-mitted in time, the rising or dropping of load should be kept at a narrow range.%介绍了中国石化青岛石化公司15 000 m3/h干气制氢装置低负荷运行的生产情况,并从操作参数、操作方式等方面提出了一些优化措施.低负荷运行最突出的问题就是转化炉管内介质分布不均匀,容易形成偏流.须采取降低加氢反应器空速和入口温度,提高转化炉水碳比,加大配氢量等措施,以增加转化炉管内介质流量,带走炉管内过多的热量.另外,还应有效控制变压吸附(PSA)解吸气中的氢气含量,适时对中变气进行切水操作,保持生产负荷提降量平稳.

  10. DRYING CHARACTERISTICS OF THE BORNEO CANARIUM ODONTOPHYLLUM (DABAI FRUIT

    Directory of Open Access Journals (Sweden)

    Dayang Fredalina Basri

    2012-01-01

    Full Text Available The quality and shelf-life of an underutilized fruits are compromised by the conventional method of drying. We therefore proposed using hot-air chamber to develop the drying curves of Canarium odontophyllum (dabai fruit. Present study provides evidence of the best mathematical model to demonstrate the drying characteristics of this indigenous fruit and thus, may generate or add to the existing database. The drying experiments were performed at three different relative humidity of 10, 20 and 30% and a constant air velocity of 1 m sec-1. Drying kinetics of C. odontophyllum fruit were investigated and obtained. A non-linear regression procedure was used to fit three different one-term exponential models of thin layer drying models. The models were compared with experimental data of C. odontophyllum fruit drying at air temperature of 55°C. The fit quality of the models was evaluated using the coefficient of determination (R2, Mean Bias Error (MBE and Root Mean Square Error (RMSE. The highest value of R2 obtained was 0.9348, the lowest MBE value was 0.0018 and the value for RMSE was 0.0420. Page model is the best mathematical model to describe the drying behavior of C. odontophyllum fruit.

  11. Watching Cement Dry

    Institute of Scientific and Technical Information of China (English)

    Stephen Green

    2010-01-01

    @@ Today, we look at what is happening in China's investment sector. We make a number of observations: A large number of new projects continue to start under local government sponsorship, meaning that real investment activity will continue to be strong in 2010. We have not yet seen the peak in demand for construction-related commodities (or labour) generated by China's stimulus package.

  12. Staying dry under water

    Science.gov (United States)

    Jones, Paul; Cruz-Chu, Eduardo; Megaridis, Constantine; Walther, Jens; Koumoutsakos, Petros; Patankar, Neelesh

    2012-11-01

    Lotus leaves are known for their non-wetting properties due to the presence of surface texture. The superhydrophobic behavior arises because of the prevention of liquid water from entering the pores of the roughness. Present superhydrophobic materials rely on air trapped within the surface pores to avoid liquid permeation. This is typically unsustainable for immersed bodies due to dissolution of the air, especially under elevated pressures. Here, molecular dynamics simulations are used to demonstrate the non-wetting behavior of an immersed ten-nanometer pore. This is accomplished by establishing thermodynamically sustained vapor pockets of the surrounding liquid medium. Over 300,000 atoms were used to construct the nanopore geometry and simulate SPC/E water molecules. Ambient pressure was varied along two isotherms (300 K, and 500 K). This approach for vapor-stabilization could offer valuable guidance for maintaining surfaces dry even in a submerged state without relying on trapped air. The approach may be extended to control general phase behavior of water adjacent to textured surfaces. ISEN support is gratefully acknowledged.

  13. Sessile nanofluid droplet drying.

    Science.gov (United States)

    Zhong, Xin; Crivoi, Alexandru; Duan, Fei

    2015-03-01

    Nanofluid droplet evaporation has gained much audience nowadays due to its wide applications in painting, coating, surface patterning, particle deposition, etc. This paper reviews the drying progress and deposition formation from the evaporative sessile droplets with the suspended insoluble solutes, especially nanoparticles. The main content covers the evaporation fundamental, the particle self-assembly, and deposition patterns in sessile nanofluid droplet. Both experimental and theoretical studies are presented. The effects of the type, concentration and size of nanoparticles on the spreading and evaporative dynamics are elucidated at first, serving the basis for the understanding of particle motion and deposition process which are introduced afterward. Stressing on particle assembly and production of desirable residue patterns, we express abundant experimental interventions, various types of deposits, and the effects on nanoparticle deposition. The review ends with the introduction of theoretical investigations, including the Navier-Stokes equations in terms of solutions, the Diffusion Limited Aggregation approach, the Kinetic Monte Carlo method, and the Dynamical Density Functional Theory. Nanoparticles have shown great influences in spreading, evaporation rate, evaporation regime, fluid flow and pattern formation of sessile droplets. Under different experimental conditions, various deposition patterns can be formed. The existing theoretical approaches are able to predict fluid dynamics, particle motion and deposition patterns in the particular cases. On the basis of further understanding of the effects of fluid dynamics and particle motion, the desirable patterns can be obtained with appropriate experimental regulations.

  14. Viscous property of dried clay

    Institute of Scientific and Technical Information of China (English)

    XU Li-sheng; LI Jian-zhong

    2006-01-01

    One dimensional and triaxial compression tests of air-dried and oven-dried Fujinomori clay and Pisa clay were carried out. Water content is less than 4.5 % and 1.0% for air-dried and oven-dried clay specimens, respectively. In all tests, axial strain rate was changed stepwise many times and drained creep tests were performed several times during monotonic loading at a constant strain rate. Global unloading (and also reloading in some tests) was applied during which creep loading tests were performed several times. Cyclic loading with small stress amplitude and several cycles was also performed to calculate the modulus of elasticity of the clay in tests. Local displacement transducer was used in triaxial compression test to increase measuring accuracy of axial strain. The results show that air-dried and oven-dried clay have noticeable viscous properties; during global unloading, creep deformation changes from positive to negative, i.e. there exist neutral points (zero creep deformation or no creep deformation point) in global unloading part of strain-stress curve; viscous property of Fujinomori clay decreases when water content decreases, i.e. viscous property of air-dried Fujinomori clay is more significant than that of oven-dried Fujinomori clay.

  15. Microwave Drying of Moist Coals

    Science.gov (United States)

    Salomatov, Vl. V.; Karelin, V. A.; Sladkov, S. O.; Salomatov, Vas. V.

    2017-03-01

    Physical principles and examples of practical implementation of drying large bodies of coal by microwave radiation are considered. It is shown that energy consumption in microwave drying of brown coals decreases to 1.5-1.8 (kW·h)/ kg as compared with traditional types of drying, for which the expenditures of energy amount to 3.0 (kW·h)/kg. In using microwave drying, the technological time of drying decreases to 4 h, whereas the time of convective drying, with other things being equal, comes to 8-20 h. Parallel with microwave radiation drying, grinding of a fuel takes place, as well as entrainment of such toxic and ecologically harmful elements as mercury, chlorine, phosphorus, sulfur, and nitrogen. An analysis of the prospects of using a microwave energy for drying coal fuel has shown that microwave radiation makes it possible to considerably economize in energy, increase explosional safety, improve the ecological situation, and reduce the metal content and overall dimensions of the equipment.

  16. Dry release of suspended nanostructures

    DEFF Research Database (Denmark)

    Forsén, Esko Sebastian; Davis, Zachary James; Dong, M.;

    2004-01-01

    A dry release method for fabrication of suspended nanostructures is presented. The technique has been combined with an anti-stiction treatment for fabrication of nanocantilever based nanoelectromechanical systems (NEMS). The process combines a dry release method, using a supporting layer of photo......A dry release method for fabrication of suspended nanostructures is presented. The technique has been combined with an anti-stiction treatment for fabrication of nanocantilever based nanoelectromechanical systems (NEMS). The process combines a dry release method, using a supporting layer......, the technique enables long time storage and transportation of produced devices without the risk of stiction. By combining the dry release method with a plasma deposited anti-stiction coating both fabrication induced stiction, which is mainly caused by capillary forces originating from the dehydration...

  17. Drying Characteristics of Garcinia atroviridis

    Directory of Open Access Journals (Sweden)

    Waigoon RITTIRUT

    2006-01-01

    Full Text Available Some physical and chemical properties of fresh garcinia fruits are reported. The most suitable drying conditions for garcinia material in a tray dryer based on the final moisture content were determined by extensive testing. It was found that for the material thickness of 2, 4 and 6 mm, a temperature of 55 °C and air velocity of 1.2 m/s are suitable for drying. The most suitable time where the final moisture content met the commercial standard was found to be 199, 256 and 427 min, respectively. The higher the temperature, the shorter the drying time. It was also observed that the suitable drying time for 2-mm thick material and air velocity of 1.2 m/s was 199, 159 and 99 min for drying temperature of 55, 65 and 75 °C, respectively. Drying characteristics are also reported. Most of the drying rate curves appear in a falling rate period except at low temperature and low velocity of operation parameters i.e. 55 °C and 0.5 m/s for 4-mm thick material, where the constant drying rate is approximately 0.09 kg water/min.m2. The sorption isotherm is sigmoidal shape at 30 °C and monolayer moisture content is 14.78 kg water/100 kg dry solid. Soaking material in 1.5 and 3.0 %w/w sodium chloride did not affect the drying rate. Effective moisture diffusivities were evaluated to be  5.57´10-10, 6.94´10-10 and 1.11´10-9 m2/s at temperatures 55, 65 and 75 °C, respectively.

  18. Space and Industrial Brine Drying Technologies

    Science.gov (United States)

    Jones, Harry W.; Wisniewski, Richard S.; Flynn, Michael; Shaw, Hali

    2014-01-01

    This survey describes brine drying technologies that have been developed for use in space and industry. NASA has long considered developing a brine drying system for the International Space Station (ISS). Possible processes include conduction drying in many forms, spray drying, distillation, freezing and freeze drying, membrane filtration, and electrical processes. Commercial processes use similar technologies. Some proposed space systems combine several approaches. The current most promising candidates for use on the ISS use either conduction drying with membrane filtration or spray drying.

  19. Drying of α-amylase by spray drying and freeze-drying - a comparative study

    Directory of Open Access Journals (Sweden)

    S. S. de Jesus

    2014-09-01

    Full Text Available This study is aimed at comparing two traditional methods of drying of enzymes and at verifying the efficiency of each one and their advantages and disadvantages. The experiments were performed with a laboratory spray dryer and freeze-dryer using α-amylase as the model enzyme. An experimental design in star revealed that spray drying is mainly influenced by the inlet air temperature and feed flow rate, which were considered to be the main factors influencing the enzymatic activity and water activity; the long period of material exposure to high temperatures causes a partial activity loss. In the experiments of freeze drying, three methods of freezing were used (freezer, acetone and dry ice, and liquid nitrogen and samples subsequently freeze-dried for times ranging between 0-24 hours. The product obtained from the two techniques showed high enzymatic activity and low water activity. For the drying of heat-resistant enzymes, in which the product to be obtained does not have high added value, spray drying may be more economically viable because, in the freeze drying process, the process time can be considered as a limiting factor when choosing a technique.

  20. Drying of thin colloidal films

    Science.gov (United States)

    Routh, Alexander F.

    2013-04-01

    When thin films of colloidal fluids are dried, a range of transitions are observed and the final film profile is found to depend on the processes that occur during the drying step. This article describes the drying process, initially concentrating on the various transitions. Particles are seen to initially consolidate at the edge of a drying droplet, the so-called coffee-ring effect. Flow is seen to be from the centre of the drop towards the edge and a front of close-packed particles passes horizontally across the film. Just behind the particle front the now solid film often displays cracks and finally the film is observed to de-wet. These various transitions are explained, with particular reference to the capillary pressure which forms in the solidified region of the film. The reasons for cracking in thin films is explored as well as various methods to minimize its effect. Methods to obtain stratified coatings through a single application are considered for a one-dimensional drying problem and this is then extended to two-dimensional films. Different evaporative models are described, including the physical reason for enhanced evaporation at the edge of droplets. The various scenarios when evaporation is found to be uniform across a drying film are then explained. Finally different experimental techniques for examining the drying step are mentioned and the article ends with suggested areas that warrant further study.

  1. No Heat Spray Drying Technology

    Energy Technology Data Exchange (ETDEWEB)

    Beetz, Charles [ZoomEssence, Inc., Hebron, KY (United States)

    2016-06-15

    No Heat Spray Drying Technology. ZoomEssence has developed our Zooming™ spray drying technology that atomizes liquids to powders at ambient temperature. The process of drying a liquid into a powder form has been traditionally achieved by mixing a heated gas with an atomized (sprayed) fluid within a vessel (drying chamber) causing the solvent to evaporate. The predominant spray drying process in use today employs air heated up to 400° Fahrenheit to dry an atomized liquid into a powder. Exposing sensitive, volatile liquid ingredients to high temperature causes molecular degradation that negatively impacts solubility, stability and profile of the powder. In short, heat is detrimental to many liquid ingredients. The completed award focused on several areas in order to advance the prototype dryer to a commercial scale integrated pilot system. Prior to the award, ZoomEssence had developed a prototype ‘no-heat’ dryer that firmly established the feasibility of the Zooming™ process. The award focused on three primary areas to improve the technology: (1) improved ability to formulate emulsions for specific flavor groups and improved understanding of the relationship of emulsion properties to final dry particle properties, (2) a new production atomizer, and (3) a dryer controls system.

  2. Cassava Sun Drying Performance on Various Surfaces and Drying ...

    African Journals Online (AJOL)

    a raw material in the production of starch, tapioca and snack foods ... The material was dried for 8 hours daily after which it was kept indoors overnight. The surface with .... statistical package (MS Office, 2007). .... preservation and marketing.

  3. EFFECT OF DRYING CONDITIONS ON MUSHROOM QUALITY

    Directory of Open Access Journals (Sweden)

    MANOJ KULSHRESHTHA

    2009-03-01

    Full Text Available Fluidized bed drying of mushroom was undertaken to study the drying characteristics and quality of the dried mushrooms. Drying was done at drying air temperatures of 50, 70, and 90oC and air velocities of 1.71 and 2.13 m/s. Two batch sizes, namely, 0.5 kg and 1 kg of sliced milky mushrooms were dried. Drying characteristics and the quality of dried mushrooms were analyzed. The results indicated that the drying time decreased only marginally with increase in air velocity. Drying air temperature of 50oC was better as it resulted in a dried product having better rehydration characteristics, lesser shrinkage and lighter color. Highest energy efficiency (79.74% was observed while drying a batch size of 1 kg at a drying air temperature of 50oC, using an air velocity of 1.7 m/s.

  4. Natural wind drying of willow stems

    NARCIS (Netherlands)

    Gigler, J.K.; Loon, van W.K.P.; Berg, van den J.V.; Sonneveld, C.; Meerdink, G.

    2000-01-01

    The process of natural wind drying of willow (Salix viminalis) stems in large piles was investigated. A simple drying model was developed for stems. Large-scale drying experiments were conducted and drying data were statistically analysed. Whether drying in a pile of willow stems was uniform was inv

  5. A Mathematical Model for Freeze-Drying

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Based on the experiments on freeze-drying carrot and potato slabs, the effects of some parameters, such as heating temperature and pressure on the freeze-drying process are examined. A simple model of freeze-drying is established to predict drying time and the mass variations of materials during the drying. The experimental results agree well with those calculated by the model.

  6. Analysis on Photovoltaic Energy-Assisted Drying of Green Peas

    Directory of Open Access Journals (Sweden)

    Onur Taşkın

    2016-01-01

    Full Text Available A photovoltaic energy-assisted industrial dryer has been analyzed. The dryer has been tested in various weather and working conditions with 3 kg of green peas from 75.6% initial moisture content to 20% final moisture content (w.b.. The effect of various drying air temperatures at three levels (40, 50, and 60°C and two distinct air velocities (3 m/s and 4 m/s was examined. Drying performance was assessed with regard to criteria including drying kinetics, specific and total energy consumption, and color and rehydration ratio. The results have proved that total drying duration reduces as air velocity rate and drying air temperature raise. Relying upon the drying durations, the generation performances of photovoltaic panels were between 5.261 and 3.953 W. On the other part, energy consumptions of dryer were between 37.417 and 28.111 W. The best specific energy consumption was detected in 50°C at 3 m/s for 600 minutes with 7.616 kWh/kg. All drying conditions caused darkening as color parameters. Rehydration assays have showed that rehydrated green peas attained higher capacity with raised air temperature and air velocity.

  7. Nanoparticle preparation of Mefenamic acid by electrospray drying

    Energy Technology Data Exchange (ETDEWEB)

    Zolkepali, Nurul Karimah, E-mail: fitrah@salam.uitm.edu.my; Bakar, Noor Fitrah Abu, E-mail: fitrah@salam.uitm.edu.my; Anuar, Nornizar [Faculty Of Chemical Engineering, Universiti Teknologi Mara (UiTM), 40450 Shah Alam, Selangor (Malaysia); Naim, M. Nazli [Food and Process Department, Faculty of Engineering, Universiti Putra Malaysia (UPM), 43400 UPM Serdang, Selangor (Malaysia); Bakar, Mohd Rushdi Abu [Kulliyyah of Pharmacy, International Islamic University Malaysia, P.O Box 141, 25710, Kuantan, Pahang (Malaysia)

    2014-02-24

    Nanoparticles preparation of Mefenamic acid (MA) by using an electrospray drying method was conducted in this study. Electrospray drying is a process that uses electrostatic force to disperse a conductive liquid stream into fine charged droplets through the coulomb fission of charges in the liquid and finally dry into fine particles. Electrospray drying modes operation usually in Taylor cone jet, and it was formed by controlling applied voltage and liquid flow rate. A conductive liquid (2.77–8.55μScm{sup −1}) which is MA solution was prepared by using acetone with concentration 0.041 and 0.055 M before pumping at a flow rate of 3–6ml/h. By applying the applied voltage at 1.3–1.5 kV, Taylor cone jet mode was formed prior to the electrospray. During electrospray drying process, solvent evaporation from the droplet was occurring that leads to coulomb disruption and may generate to nanoparticles. The dried nanoparticles were collected on a grounded substrate that was placed at varying distance from the electrospray. MA particle with size range of 100–400 nm were produced by electrospray drying process. Characterization of particles by using X-ray diffractometry (XRD) and differential scanning calorimetry (DSC) show that particles formed into polymorph I.

  8. Do we know how plants sense a drying soil?

    Directory of Open Access Journals (Sweden)

    Streck Nereu Augusto

    2004-01-01

    Full Text Available The reduction of crop growth and yield in dry areas is largely due to stomatal closure in response to dry soil, which decreases photosynthesis. However, the mechanism that causes stomatal closure in a drying soil is a controversial issue. Experienced and respected plant physiologists around the world have different views about the primary sensor of soil water shortage in plants. The goal of this review is to present a chronological synthesis about the evidence of the possible candidates for the mechanism by which plants sense a drying soil. Hydraulic signals in the leaves as the mechanism that causes stomatal closure dominated the view on how plants sense a drying soil during the 70?s and the early 80?s. In the middle 80?s, studies suggested that stomatal conductance is better correlated with soil and root water status than with leaf water status. Thus, chemical signals produced in the roots dominated the view on how plants sense a drying soil during the late 80?s and early 90?s. During the second half of the 90?s, however, studies provided evidence that hydraulic signals in the leaves are still better candidates for the mechanism by which plants sense a drying soil. After more than 60 years of studies in plant-water relations, the question raised in the title still has no unanimous answer. This controversial issue is a good research rationale for the current generation of plant physiologists.

  9. Sustaining dry surfaces under water

    DEFF Research Database (Denmark)

    Jones, Paul R.; Hao, Xiuqing; Cruz-Chu, Eduardo R.

    2015-01-01

    Rough surfaces immersed under water remain practically dry if the liquid-solid contact is on roughness peaks, while the roughness valleys are filled with gas. Mechanisms that prevent water from invading the valleys are well studied. However, to remain practically dry under water, additional...... mechanisms need consideration. This is because trapped gas (e.g. air) in the roughness valleys can dissolve into the water pool, leading to invasion. Additionally, water vapor can also occupy the roughness valleys of immersed surfaces. If water vapor condenses, that too leads to invasion. These effects have...... not been investigated, and are critically important to maintain surfaces dry under water.In this work, we identify the critical roughness scale, below which it is possible to sustain the vapor phase of water and/or trapped gases in roughness valleys – thus keeping the immersed surface dry. Theoretical...

  10. 10-minute consultation Dry mouth

    Institute of Scientific and Technical Information of China (English)

    Mark Taubert; Eleanor M R Davies; Ian Back

    2007-01-01

    @@ A 67 year old man presents with a six week history of dry mouth (xerostomia). He has prostate cancer, which has spread to his spine, and he takes opiates for pain relief. Recently, he started taking an antidepressant.

  11. Sustaining dry surfaces under water

    Science.gov (United States)

    Jones, Paul R.; Hao, Xiuqing; Cruz-Chu, Eduardo R.; Rykaczewski, Konrad; Nandy, Krishanu; Schutzius, Thomas M.; Varanasi, Kripa K.; Megaridis, Constantine M.; Walther, Jens H.; Koumoutsakos, Petros; Espinosa, Horacio D.; Patankar, Neelesh A.

    2015-08-01

    Rough surfaces immersed under water remain practically dry if the liquid-solid contact is on roughness peaks, while the roughness valleys are filled with gas. Mechanisms that prevent water from invading the valleys are well studied. However, to remain practically dry under water, additional mechanisms need consideration. This is because trapped gas (e.g. air) in the roughness valleys can dissolve into the water pool, leading to invasion. Additionally, water vapor can also occupy the roughness valleys of immersed surfaces. If water vapor condenses, that too leads to invasion. These effects have not been investigated, and are critically important to maintain surfaces dry under water. In this work, we identify the critical roughness scale, below which it is possible to sustain the vapor phase of water and/or trapped gases in roughness valleys - thus keeping the immersed surface dry. Theoretical predictions are consistent with molecular dynamics simulations and experiments.

  12. Dry skin - self-care

    Science.gov (United States)

    ... moisture Hot, dry air in desert environments Air conditioners that cool the air and remove moisture Taking ... scrubbing your skin. Shave right after bathing, when hair is soft. Wear soft, comfortable clothing next to ...

  13. Dry aging of beef; Review

    OpenAIRE

    Dashdorj, Dashmaa; Tripathi, Vinay Kumar; Cho, Soohyun; Kim, Younghoon; Hwang, Inho

    2016-01-01

    The present review has mainly focused on the specific parameters including aging (aging days, temperature, relative humidity, and air flow), eating quality (flavor, tenderness and juiciness), microbiological quality and economic (shrinkage, retail yields and cost) involved beef dry aging process. Dry aging is the process where beef carcasses or primal cuts are hanged and aged for 28 to 55 d under controlling environment conditions in a refrigerated room with 0° to 4 °C and with relative humid...

  14. Dry PMR-15 Resin Powders

    Science.gov (United States)

    Vannucci, Raymond D.; Roberts, Gary D.

    1988-01-01

    Shelf lives of PMR-15 polymides lengthened. Procedure involves quenching of monomer reactions by vacuum drying of PRM-15 resin solutions at 70 to 90 degree F immediately after preparation of solutions. Absence of solvent eliminates formation of higher esters and reduces formation of imides to negligible level. Provides fully-formulated dry PMR-15 resin powder readily dissolvable in solvent at room temperature immediately before use. Resins used in variety of aerospace, aeronautical, and commercial applications.

  15. Development of a rapid screening protocol for selection of strains resistant to spray drying and storage in dry powder.

    Science.gov (United States)

    Reimann, S; Grattepanche, F; Baggenstos, C; Rezzonico, E; Berger, B; Arigoni, F; Lacroix, C

    2010-06-01

    An efficient screening method for selection of Bifidobacterium longum strains resistant to spray drying and storage was developed based on randomly amplified polymorphic DNA (RAPD) for identification of the best survivors in mixed strains bacterial preparations. Three different primers were used to generate RAPD profiles of 22 B. longum strains. All strains were distinguished according to their RAPD profiles except for the strain NCC2705 and its H(2)O(2) resistant derivative variant. The 22 strains were grouped in 3 batches of 7, 7 and 8 strains and subjected to spray drying and storage at 30 and 37 °C under anaerobic conditions. Batch survival rates after spray drying reached 17.1±4.4%. Strains showing the highest prevalence and/or resistance to storage at 37 °C were selected from individual batches for subsequent spray drying and storage testing. After 67 days of storage, NCC572 was identified as the dominant strain in powder. The stability of strain NCC572 was confirmed by performing single spray drying and storage tests. Out of 22 B. longum strains, a robust strain was identified by combining RAPD with a simultaneous screening test for survival under spray drying and storage. The method allowed a fast screening of B. longum strains in mixture for resistance to spray drying and storage compared to traditional screening procedures carried out with individual strains, in the same conditions. This approach could be applied to other stress conditions.

  16. Dry adhesives with sensing features

    Science.gov (United States)

    Krahn, J.; Menon, C.

    2013-08-01

    Geckos are capable of detecting detachment of their feet. Inspired by this basic observation, a novel functional dry adhesive is proposed, which can be used to measure the instantaneous forces and torques acting on an adhesive pad. Such a novel sensing dry adhesive could potentially be used by climbing robots to quickly realize and respond appropriately to catastrophic detachment conditions. The proposed torque and force sensing dry adhesive was fabricated by mixing Carbon Black (CB) and Polydimethylsiloxane (PDMS) to form a functionalized adhesive with mushroom caps. The addition of CB to PDMS resulted in conductive PDMS which, when under compression, tension or torque, resulted in a change in the resistance across the adhesive patch terminals. The proposed design of the functionalized dry adhesive enables distinguishing an applied torque from a compressive force in a single adhesive pad. A model based on beam theory was used to predict the change in resistance across the terminals as either a torque or compressive force was applied to the adhesive patch. Under a compressive force, the sensing dry adhesive was capable of measuring compression stresses from 0.11 Pa to 20.9 kPa. The torque measured by the adhesive patch ranged from 2.6 to 10 mN m, at which point the dry adhesives became detached. The adhesive strength was 1.75 kPa under an applied preload of 1.65 kPa for an adhesive patch with an adhesive contact area of 7.07 cm2.

  17. Morphology of drying blood pools

    Science.gov (United States)

    Laan, Nick; Smith, Fiona; Nicloux, Celine; Brutin, David; D-Blood project Collaboration

    2016-11-01

    Often blood pools are found on crime scenes providing information concerning the events and sequence of events that took place on the scene. However, there is a lack of knowledge concerning the drying dynamics of blood pools. This study focuses on the drying process of blood pools to determine what relevant information can be obtained for the forensic application. We recorded the drying process of blood pools with a camera and measured the weight. We found that the drying process can be separated into five different: coagulation, gelation, rim desiccation, centre desiccation, and final desiccation. Moreover, we found that the weight of the blood pool diminishes similarly and in a reproducible way for blood pools created in various conditions. In addition, we verify that the size of the blood pools is directly related to its volume and the wettability of the surface. Our study clearly shows that blood pools dry in a reproducible fashion. This preliminary work highlights the difficult task that represents blood pool analysis in forensic investigations, and how internal and external parameters influence its dynamics. We conclude that understanding the drying process dynamics would be advancement in timeline reconstitution of events. ANR funded project: D-Blood Project.

  18. Dry Eyes and Glaucoma: Double Trouble

    Science.gov (United States)

    ... News About Us Donate In This Section Dry Eyes and Glaucoma: Double Trouble email Send this article ... disease bothers the patient more. What Causes Dry Eye Syndrome? Dry eye can be caused by many ...

  19. DRI Renewable Energy Center (REC) (NV)

    Energy Technology Data Exchange (ETDEWEB)

    Hoekman, S. Kent; Broch, Broch; Robbins, Curtis; Jacobson, Roger; Turner, Robert

    2012-12-31

    The primary objective of this project was to utilize a flexible, energy-efficient facility, called the DRI Renewable Energy Experimental Facility (REEF) to support various renewable energy research and development (R&D) efforts, along with education and outreach activities. The REEF itself consists of two separate buildings: (1) a 1200-ft2 off-grid capable house and (2) a 600-ft2 workshop/garage to support larger-scale experimental work. Numerous enhancements were made to DRI's existing renewable power generation systems, and several additional components were incorporated to support operation of the REEF House. The power demands of this house are satisfied by integrating and controlling PV arrays, solar thermal systems, wind turbines, an electrolyzer for renewable hydrogen production, a gaseous-fuel internal combustion engine/generator set, and other components. Cooling needs of the REEF House are satisfied by an absorption chiller, driven by solar thermal collectors. The REEF Workshop includes a unique, solar air collector system that is integrated into the roof structure. This system provides space heating inside the Workshop, as well as a hot water supply. The Workshop houses a custom-designed process development unit (PDU) that is used to convert woody biomass into a friable, hydrophobic char that has physical and chemical properties similar to low grade coal. Besides providing sufficient space for operation of this PDU, the REEF Workshop supplies hot water that is used in the biomass treatment process. The DRI-REEF serves as a working laboratory for evaluating and optimizing the performance of renewable energy components within an integrated, residential-like setting. The modular nature of the system allows for exploring alternative configurations and control strategies. This experimental test bed is also highly valuable as an education and outreach tool both in providing an infrastructure for student research projects, and in highlighting renewable

  20. High-intensity drying processes-impulse drying

    Energy Technology Data Exchange (ETDEWEB)

    Orloff, D.I.

    1991-06-01

    Impulse drying is an innovative process for drying paper that holds great promise for reducing the energy consumed during the manufacture of paper and similar web products. impulse drying occurs when a wet paper web passes through a press nip in which one of the rolls is heated to a high temperature. A steam layer adjacent to the heated surface grows and displaces water from the sheet in a very efficient manner. The energy required for water removal is very much less than that required for conventional evaporative drying. To eliminate sheet delamination, low thermal mass ceramic press roll coatings were developed to reduce heat transfer to the sheet, while maintaining high heat flux during early stages of the process. In so doing, most of the transferred energy is used to form steam that displaces liquid water, rather than in excessively heating the sheet. During this period, a prototype ceramic coating was developed and its impulse drying performance was compared to that of steel surfaces. It was observed that ceramic platens can be operated at higher temperatures and pressures resulting in improved water removal and physical properties without inducing sheet delamination. Heat flux measurement techniques were developed to provide a mechanistic explanation for the superior performance of the prototype. The work confirmed that the prototype ceramic coating is more energy efficient than the steel surface.

  1. High-intensity drying processes-impulse drying. Yearly report

    Energy Technology Data Exchange (ETDEWEB)

    Orloff, D.I.

    1991-06-01

    Impulse drying is an innovative process for drying paper that holds great promise for reducing the energy consumed during the manufacture of paper and similar web products. impulse drying occurs when a wet paper web passes through a press nip in which one of the rolls is heated to a high temperature. A steam layer adjacent to the heated surface grows and displaces water from the sheet in a very efficient manner. The energy required for water removal is very much less than that required for conventional evaporative drying. To eliminate sheet delamination, low thermal mass ceramic press roll coatings were developed to reduce heat transfer to the sheet, while maintaining high heat flux during early stages of the process. In so doing, most of the transferred energy is used to form steam that displaces liquid water, rather than in excessively heating the sheet. During this period, a prototype ceramic coating was developed and its impulse drying performance was compared to that of steel surfaces. It was observed that ceramic platens can be operated at higher temperatures and pressures resulting in improved water removal and physical properties without inducing sheet delamination. Heat flux measurement techniques were developed to provide a mechanistic explanation for the superior performance of the prototype. The work confirmed that the prototype ceramic coating is more energy efficient than the steel surface.

  2. Gas storage in "dry water" and "dry gel" clathrates.

    Science.gov (United States)

    Carter, Benjamin O; Wang, Weixing; Adams, Dave J; Cooper, Andrew I

    2010-03-02

    "Dry water" (DW) is a free-flowing powder prepared by mixing water, hydrophobic silica particles, and air at high speeds. We demonstrated recently that DW can be used to dramatically enhance methane uptake rates in methane gas hydrate (MGH). Here, we expand on our initial work, demonstrating that DW can be used to increase the kinetics of formation of gas clathrates for gases other than methane, such as CO(2) and Kr. We also show that the stability of the system toward coalescence can be increased via the inclusion of a gelling agent to form a "dry gel", thus dramatically improving the recyclability of the material. For example, the addition of gellan gum allows effective reuse over at least eight clathration cycles without the need for reblending. DW and its "dry gel" modification may represent a potential platform for recyclable gas storage or gas separation on a practicable time scale in a static, unmixed system.

  3. PREBIOTICS AS DRYING AIDS FOR SPRAY DRYING FRUIT JUICES

    Directory of Open Access Journals (Sweden)

    R. FREIXO

    2016-10-01

    Full Text Available Natural fruit juices are difficult to transform into powder because they are rich in sugars and acids with low glass transition temperatures, resulting in a sticky behaviour during spray drying. The present research work aimed to test the prebiotics maltodextrin and arabic gum as drying agents in order to be able to produce dehydrated powder from pineapple, strawberry and apple juices. 2 % of maltodextrin and an inlet air temperature of 130 °C are recommended to spray dry apple juice, reaching 60 % yield of powder with a water activity below 0.40. For strawberry juice, 2 % of this carrier is recommended and the inlet air temperature, 120 °C or 130 °C, did not seem relevant. For pineapple, neither the concentration of the carrier nor the inlet air temperature seemed to be relevant.

  4. Technological and practical challenges of dry powder inhalers and formulations

    NARCIS (Netherlands)

    Hoppentocht, M.; Hagedoorn, P.; Frijlink, H.W.; de Boer, A.H.

    2014-01-01

    In the 50 years following the introduction of the first dry powder inhaler to the market, several developments have occurred. Multiple-unit dose and multi-dose devices have been introduced, but first generation capsule inhalers are still widely used for new formulations. Many new particle engineerin

  5. Potential evapotranspiration and continental drying

    Science.gov (United States)

    Milly, P. C. D.; Dunne, K. A.

    2016-10-01

    By various measures (drought area and intensity, climatic aridity index, and climatic water deficits), some observational analyses have suggested that much of the Earth’s land has been drying during recent decades, but such drying seems inconsistent with observations of dryland greening and decreasing pan evaporation. `Offline’ analyses of climate-model outputs from anthropogenic climate change (ACC) experiments portend continuation of putative drying through the twenty-first century, despite an expected increase in global land precipitation. A ubiquitous increase in estimates of potential evapotranspiration (PET), driven by atmospheric warming, underlies the drying trends, but may be a methodological artefact. Here we show that the PET estimator commonly used (the Penman-Monteith PET for either an open-water surface or a reference crop) severely overpredicts the changes in non-water-stressed evapotranspiration computed in the climate models themselves in ACC experiments. This overprediction is partially due to neglect of stomatal conductance reductions commonly induced by increasing atmospheric CO2 concentrations in climate models. Our findings imply that historical and future tendencies towards continental drying, as characterized by offline-computed runoff, as well as other PET-dependent metrics, may be considerably weaker and less extensive than previously thought.

  6. Drying characteristics and kinetics of fluidized bed dried potato

    Directory of Open Access Journals (Sweden)

    S.B. BAKAL

    2008-12-01

    Full Text Available In developed countries, more than 50% potatoes are consumed as processed products. As drying is the vital phenomenon in processing, it is necessary to investigate the drying characteristics and its kinetics. In this experimental study, drying kinetics of Potato in two different shape of cuboidal & cylindrical with three aspect ratio was investigated as a function of drying conditions. Experiments were conducted using air temperatures of 50, 60 and 70 ºC, at velocity of 7 ms-1. The experimental moisture data were fitted to Page and simple models available in the literature, and a good agreement was observed. The Page model gave better fit than simple model. In the ranges covered, the values of the effective moisture diffusivity, Deff were obtained between 2.278 × 10-9 to 3.314 × 10-8 m2s-1 from the Fick's diffusion model. Using Deff, the value of activation energy (Ea was determined assuming the Arrhenius-type temperature relationship.

  7. Solar Drying of Red Mud

    Science.gov (United States)

    Chandler, John L.

    Solar drying of thickened red mud is the latest method for its disposal in an economical and environmentally acceptable way. Two years full scale experience with this method in Jamaica has shown that its success depends on accurate grading of the solar drying area and accurate control of the pre-dewatering of the mud in the alumina plant. Experience with the use of deep thickening for pre-dewatering is described, together with a novel method for measurement and control of thickened mud rheology.

  8. Development of freeze dried vegetables

    Science.gov (United States)

    Larson, R. W.

    1970-01-01

    The development of freeze dried vegetables to be used in the Apollo food system is discussed. After the initial selection and screening of vegetables, several types of freeze dried vegetables were prepared in small batches. From these small batches, two vegetables were judged satisfactory for further testing and evaluation. These vegetables, mashed potatoes and asparagus, were subjected to storage at 100 deg plus or minus 5 F. for two weeks and then taste tested. The vegetables were also tested to determine if they complied with the microbiological requirements for Apollo food. The space food prototype production guide for the vegetables is submitted.

  9. Dry technologies and community bureaucracies

    DEFF Research Database (Denmark)

    Rasmussen, Mattias Borg

    2014-01-01

    Irrigation channels criss-cross the Andes, bringing water to the dry soils of the peasants' fields. To obtain water, people must deal not only with the amount of water and the physical terrain, but also with concerns of others and matters of the social terrain.......Irrigation channels criss-cross the Andes, bringing water to the dry soils of the peasants' fields. To obtain water, people must deal not only with the amount of water and the physical terrain, but also with concerns of others and matters of the social terrain....

  10. Fundamentals of freeze-drying.

    Science.gov (United States)

    Nail, Steven L; Jiang, Shan; Chongprasert, Suchart; Knopp, Shawn A

    2002-01-01

    Given the increasing importance of reducing development time for new pharmaceutical products, formulation and process development scientists must continually look for ways to "work smarter, not harder." Within the product development arena, this means reducing the amount of trial and error empiricism in arriving at a formulation and identification of processing conditions which will result in a quality final dosage form. Characterization of the freezing behavior of the intended formulation is necessary for developing processing conditions which will result in the shortest drying time while maintaining all critical quality attributes of the freeze-dried product. Analysis of frozen systems was discussed in detail, particularly with respect to the glass transition as the physical event underlying collapse during freeze-drying, eutectic mixture formation, and crystallization events upon warming of frozen systems. Experiments to determine how freezing and freeze-drying behavior is affected by changes in the composition of the formulation are often useful in establishing the "robustness" of a formulation. It is not uncommon for seemingly subtle changes in composition of the formulation, such as a change in formulation pH, buffer salt, drug concentration, or an additional excipient, to result in striking differences in freezing and freeze-drying behavior. With regard to selecting a formulation, it is wise to keep the formulation as simple as possible. If a buffer is needed, a minimum concentration should be used. The same principle applies to added salts: If used at all, the concentration should be kept to a minimum. For many proteins a combination of an amorphous excipient, such as a disaccharide, and a crystallizing excipient, such as glycine, will result in a suitable combination of chemical stability and physical stability of the freeze-dried solid. Concepts of heat and mass transfer are valuable in rational design of processing conditions. Heat transfer by conduction

  11. 7 CFR 58.813 - Dry whey.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Dry whey. 58.813 Section 58.813 Agriculture... Products Bearing Usda Official Identification § 58.813 Dry whey. The quality requirements for dry whey shall be in accordance with the U.S. Standards for Dry Whey. Supplemental Specifications for...

  12. The characteristics of wet and dry spells for the diverse climate in China

    Science.gov (United States)

    Li, Zhi; Li, Yanping; Shi, Xiaoping; Li, Jingjing

    2017-02-01

    Using a large precipitation dataset from 692 gauge stations across China for the period of 1960-2013, this study analyzed the characteristics of wet/dry spells related to four types of climate including arid, semiarid, semiarid to subhumid, and humid climate. A wet/dry spell is defined as the consecutive days with precipitation amount greater/less than a threshold. The frequency of wet/dry spells, the contributions of wet/dry spells with different lengths to the total number of wet/dry days and total precipitation amount were analyzed for different climate types. The wet/dry spells with the greatest contributions to the total wet/dry days or total precipitation amount vary with climate. For drier climate, long-duration dry spells contribute more to the total number of dry days, while short-duration wet spells contribute more to the total number of wet days and the total precipitation amount. The characteristics of wet/dry spells are closely related to local climate. Good regression relationships were obtained for the number of dry/wet spell versus spell length, and precipitation amount versus wet spell length. Although the correlation between precipitation amount and wet spell length has rarely been considered in stochastic precipitation generation, the relationships identified in this study justify the necessity of taking it into account.

  13. Hybrid Rice for Dry Regions

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    Luo Lijun, director of the Shanghai Agrobiological Gene Center, recently announced that Hanyou No. 3 - a genetically modified rice capable of producing high yields in dry areas - has been developed at the center.The hybrid yields 7,571 kilograms per hectare, about the same as ordinary rice.

  14. Apparatus for drying sugar cubes

    NARCIS (Netherlands)

    Derckx, H.A.J.; Torringa, H.M.

    1999-01-01

    Device for drying sugar cubes containing a heating apparatus for heating and dehumidifying the sugar cubes, a conditioning apparatus for cooling off and possibly further dehumidifying the sugar cubes and a conveying apparatus for conveying the sugar cubes through the heating apparatus and the condit

  15. Apparatus for drying sugar cubes

    NARCIS (Netherlands)

    Derckx, H.A.J.; Torringa, H.M.

    1999-01-01

    Device for drying sugar cubes containing a heating apparatus for heating and dehumidifying the sugar cubes, a conditioning apparatus for cooling off and possibly further dehumidifying the sugar cubes and a conveying apparatus for conveying the sugar cubes through the heating apparatus and the

  16. Longevity Of Dry Film Lubricants

    Science.gov (United States)

    Kannel, J. W.; Stockwell, R. D.

    1993-01-01

    Report describes evaluation of dry film lubricants candidate for use in rotary joints of proposed Space Station. Study included experiments and theoretical analyses focused on longevity of sputtered molybdenum disulfide films and ion-plated lead films under conditions partially simulating rolling contact.

  17. Apparatus for drying sugar cubes

    NARCIS (Netherlands)

    Derckx, H.A.J.; Torringa, H.M.

    1999-01-01

    Device for drying sugar cubes containing a heating apparatus for heating and dehumidifying the sugar cubes, a conditioning apparatus for cooling off and possibly further dehumidifying the sugar cubes and a conveying apparatus for conveying the sugar cubes through the heating apparatus and the condit

  18. Flavour release from dried vegetables.

    NARCIS (Netherlands)

    Ruth, van S.M.

    1995-01-01

    The research described in this thesis was focused on the development of an in vitro model system for isolation of volatile compounds from dried vegetables under mouth conditions, such as volume of the mouth, temperature, salivation and mastication. Instrumental analysis of these volatile compoun

  19. Determination of drying characteristics and quality properties of eggplant in different drying conditions

    Directory of Open Access Journals (Sweden)

    Gözde Bayraktaroglu Urun

    2015-12-01

    Full Text Available Drying is the most traditional process used for preserving eggplant a long time. The aim of this study was to determining drying characteristics and quality properties of eggplant dried by sun drying, hot air convective drying and infrared assisted convective drying. Convective drying and infrared assisted convective were carried out in a convective dryer at three different temperatures(40°, 50°, 60°C and air velocity at 5 m/s.The increasing of temperatures during the drying of eggplant led to a significant reduction of the drying time. However loss of nutrition was observed in eggplant samples dried at higher temperature.The biggest change in colour parameters was observed in samples dried with sun drying.So it was thought that sun drying had a negative effect on quality properties of eggplant samples.

  20. Thermoelectric Powered Wireless Sensors for Dry-Cask Storage

    Science.gov (United States)

    Carstens, Thomas Alan

    This study focuses on the development of self-powered wireless sensors. These sensors can be used to measure key parameters in extreme environments; e.g., temperature monitoring for spent nuclear fuel during dry-cask storage. This study has developed a design methodology for these self-powered monitoring systems. The main elements that constitute this work consist of selecting and testing a power source for the wireless sensor, determination of the attenuation of the wireless signal, and testing the wireless sensor circuitry in an extreme environment. OrigenArp determined the decay heat and gamma/neutron source strength of the spent fuel throughout the service life of the dry-cask. A first principles analysis modeled the temperatures inside the dry-cask. A finite-element heat transfer code calculated the temperature distribution of the thermoelectric and heat sink. The temperature distributions determine the power produced by the thermoelectric. It was experimentally verified that a thermoelectric generator (HZ-14) with a DC/DC converter (Linear Technology LTC3108EDE) can power a transceiver (EmbedRF) at condition which represent prototypical conditions throughout and beyond the service life of the dry-cask. The wireless sensor is required to broadcast with enough power to overcome the attenuation from the dry-cask. It will be important to minimize the attenuation of the signal in order to broadcast with a small transmission power. To investigate the signal transmission through the dry-cask, CST Microwave Studio was used to determine the scattering parameter S2,1 for a horizontal dry-cask. Important parameters that can influence the transmission of the signal are antenna orientation, antenna placement, and transmission frequency. The thermoelectric generator, DC/DC converter, and transceiver were exposed to 60Co gamma radiation (exposure rate170.3 Rad/min) at the University of Wisconsin Medical Radiation Research Center. The effects of gamma radiation on the

  1. Solar drying of jack fruit almonds

    OpenAIRE

    Alexandre J. de M. Queiroz; Dantas,Hermeval J; Figueirêdo,Rossana M. F. de; Karla dos S Melo

    2011-01-01

    Dryers heated by solar energy have been constructed and used in drying whole and half jack fruit almonds. The samples were dried during the day in direct sun and in the conventional solar dryer prepared for this purpose. Another piece of equipment was built for reception and accumulation of sun energy in a body of water, which was used as a heat source for night drying. The drying with the sun energy was compared with artificial drying. The jack fruit almonds were dried whole, half, with pell...

  2. Magnetic field switchable dry adhesives.

    Science.gov (United States)

    Krahn, Jeffrey; Bovero, Enrico; Menon, Carlo

    2015-02-01

    A magnetic field controllable dry adhesive device is manufactured. The normal adhesion force can be increased or decreased depending on the presence of an applied magnetic field. If the magnetic field is present during the entire normal adhesion test cycle which includes both applying a preloading force and measuring the pulloff pressure, a decrease in adhesion is observed when compared to when there is no applied magnetic field. Similarly, if the magnetic field is present only during the preload portion of the normal adhesion test cycle, a decrease in adhesion is observed because of an increased stiffness of the magnetically controlled dry adhesive device. When the applied magnetic field is present during only the pulloff portion of the normal adhesion test cycle, either an increase or a decrease in normal adhesion is observed depending on the direction of the applied magnetic field.

  3. Fatigue limits of enamel bonds with moist and dry techniques.

    Science.gov (United States)

    Barkmeier, Wayne W; Erickson, Robert L; Latta, Mark A

    2009-12-01

    Shear fatigue limit (SFL) testing, coupled with shear bond strength (SBS) measurements can provide valuable information regarding the ability of adhesive systems to bond to mineralized tooth structures. The clinical technique for enamel bonding with adhesive resins has shifted from bonding to a thoroughly dried acid conditioned surface to a moist surface to facilitate dentin bonding. The purpose of this study was to compare the performance of ethanol-containing etch-and-rinse adhesive (ERA) systems on moist and dry enamel by determining the resin composite to enamel SBS and SFL, and examining the relationship of SBS and SFL. Twelve specimens each were used to determine 24-h resin composite (Z100 - 3M ESPE) to enamel SBS to moist and dry surfaces with two ERA systems, Adper Single Bond Plus (SBP) and OptiBond Solo Plus (OBP). A staircase method of fatigue testing was used in a four-station fatigue cycler to determine the SFL of resin composite to enamel bonds (moist and dry) with the two ERA systems (20 specimens for each test condition) at 0.25Hz for 40,000 cycles. ANOVA and Tukey's post hoc test were used for the SBS data and a modified t-test with Bonferroni correction was used for comparisons of SFL. The two ERA systems each generated statistically similar SBS (p>0.05) to moist and dry enamel and the SBS of SBP was significantly higher than OBP on dry enamel (padhesive systems. The chemical composition, solvents and filler components of ERA systems may influence their ability to develop long-term durable bonds to both moist and dry enamel surfaces.

  4. Drying characteristics of ultrasound assisted hot air drying of Flos Lonicerae

    OpenAIRE

    LIU, YUNHONG; Sun, Yue; Miao, Shuai; Li, Fang; Luo, Denglin

    2014-01-01

    Ultrasound assisted hot air drying of Flos Lonicerae was investigated in this study. The effects of drying parameters such as ultrasonic radiation distance, ultrasonic power and drying temperature on drying characteristics were discussed. The results showed that ultrasound application has positive and significant effects on hot air drying. Shortening ultrasonic radiation distance is beneficial to improve both ultrasonic energy efficiency and drying rate. Higher ultrasonic power had more posit...

  5. Quality by Design approach to spray drying processing of crystalline nanosuspensions.

    Science.gov (United States)

    Kumar, Sumit; Gokhale, Rajeev; Burgess, Diane J

    2014-04-10

    Quality by Design (QbD) principles were explored to understand spray drying process for the conversion of liquid nanosuspensions into solid nano-crystalline dry powders using indomethacin as a model drug. The effects of critical process variables: inlet temperature, flow and aspiration rates on critical quality attributes (CQAs): particle size, moisture content, percent yield and crystallinity were investigated employing a full factorial design. A central cubic design was employed to generate the response surface for particle size and percent yield. Multiple linear regression analysis and ANOVA were employed to identify and estimate the effect of critical parameters, establish their relationship with CQAs, create design space and model the spray drying process. Inlet temperature was identified as the only significant factor (p value dried nano-crystalline powders. Aspiration and flow rates were identified as significant factors affecting yield (p value dried at higher inlet temperatures had lower moisture compared to those dried at lower inlet temperatures.

  6. Drying poly(ethylene glycol)

    OpenAIRE

    sprotocols

    2015-01-01

    Authors: Lucas Kinard, Kurtis Kasper & Antonios Mikos ### Abstract This protocol describes the drying of poly(ethylene glycol) (PEG) by a simple 6 step procedure. One can implement this protocol using common lab glass and lab equipment. Water is removed from PEG by azeotropic distillation in toluene. The two components are mixed and toluene and water are distilled off by heating the solution to 170°C. This procedure can be implemented in ~2 h. ### Introduction In many ...

  7. Uniaxial tension of drying sieves

    Directory of Open Access Journals (Sweden)

    Bojić Nada V.

    2013-01-01

    Full Text Available Although the literature contains numerous studies that have been developed to describe the nonlinear behavior of drying sieves' operation, there are no papers in this which report deeper investigation of the drying sieve behavior when exposed to tension and thermo stabilization. The aim of this paper is to provide insight into the elastoplastic behavior of the thermo stabilized and not stabilized sieves subjected to the tensile force. Within this work both theoretical and experimental investigations were performed. The sieves were joined by using a spiral. In separate experiments tests of wire base and weft of the weave mesh were performed, both for thermo stabilized and not thermo stabilized sieves, sieves joining and the sieve thermo stabilization itself. It was established that the thermo stabilization of sieves provides for stability of sieves' dimensions and that open thermo stabilized drying sieve exhibits better mechanical properties and exploitation characteristics then the sieves joining. [Projekat Ministarstva nauke Republike Srbije, br. ON174004: Micromechanics criteria of damage and fracture and br. TR 32036: Development of software for solving the coupled multi-physical problems

  8. Advantages on dry interim storage for spent nuclear fuel

    Energy Technology Data Exchange (ETDEWEB)

    Romanato, L.S. [Centro Tecnologico da Marinha em Sao Paulo, Av. Professor Lineu Prestes 2468, 05508-900 Sao Paulo (Brazil); Rzyski, B.M. [IPEN/ CNEN-SP, 05508-000 Sao Paulo (Brazil)]. e-mail: romanato@ctmsp.mar.mil.br

    2006-07-01

    When the nuclear fuel lose its ability to efficiently create energy it is removed from the core reactor and moved to a storage unit waiting for a final destination. Generally, the spent nuclear fuel (SNF) remains inside concrete basins with water within the reactors facility for the radioactive activity decay. Water cools the generated heat and shields radioactivity emissions. After some period of time in water basins the SNF can be sent to a definitive deposition in a geological repository and handled as radioactive waste or to reprocessing installations, or still wait for a future solution. Meanwhile, SNF remains stored for a period of time in dry or wet installations, depending on the method adopted by the nuclear power plant or other plans of the country. In many SNF wet storage sites the capacity can be fulfilled very quickly. If so, additional area or other alternative storage system should be given. There are many options to provide capacity increase in the wet storage area, but dry storages are worldwide preferred since it reduces corrosion concerns. In the wet storage the temperature and water purity should be constantly controlled whereas in the dry storage the SNF stands protected in specially designed canisters. Dry interim storages are practical and approved in many countries especially that have the 'wait and see' philosophy (wait to see new technologies development). This paper shows the advantages of dry interim storages sites in comparison with the wet ones and the nowadays problems as terrorism. (Author)

  9. Changes in dry state hemoglobin over time do not increase the potential for oxidative DNA damage in dried blood.

    Directory of Open Access Journals (Sweden)

    April Marrone

    Full Text Available BACKGROUND: Hemoglobin (Hb is the iron-containing oxygen transport protein present in the red blood cells of vertebrates. Ancient DNA and forensic scientists are particularly interested in Hb reactions in the dry state because both regularly encounter aged, dried bloodstains. The DNA in such stains may be oxidatively damaged and, in theory, may be deteriorated by the presence of Hb. To understand the nature of the oxidative systems potentially available to degrade DNA in the presence of dried Hb, we need to determine what molecular species Hb forms over time. These species will determine what type of iron (i.e. Fe(2+/Fe(3+/Fe(4+ is available to participate in further chemical reactions. The availability of "free" iron will affect the ability of the system to undergo Fenton-type reactions which generate the highly reactive hydroxyl radical (OH*. The OH* can directly damage DNA. METHODOLOGY/PRINCIPAL FINDINGS: Oxygenated Hb (oxyHb converts over time to oxidized Hb (metHb, but this happens more quickly in the dry state than in the hydrated state, as shown by monitoring stabilized oxyHb. In addition, dry state oxyHb converts into at least one other unknown species other than metHb. Although "free" iron was detectable as both Fe(2+ and Fe(3+ in dry and hydrated oxyHb and metHb, the amount of ions detected did not increase over time. There was no evidence that Hb becomes more prone to generating OH* as it ages in either the hydrated or dry states. CONCLUSIONS: The Hb molecule in the dried state undergoes oxidative changes and releases reactive Fe(II cations. These changes, however, do not appear to increase the ability of Hb to act as a more aggressive Fenton reagent over time. Nevertheless, the presence of Hb in the vicinity of DNA in dried bloodstains creates the opportunity for OH*-induced oxidative damage to the deoxyribose sugar and the DNA nucleobases.

  10. Application of Dynamic Speckle Techniques in Monitoring Biofilms Drying Process

    Science.gov (United States)

    Enes, Adilson M.; Júnior, Roberto A. Braga; Dal Fabbro, Inácio M.; da Silva, Washington A.; Pereira, Joelma

    2008-04-01

    Horticultural crops exhibit losses far greater than grains in Brazil which are associated to inappropriate maturation, mechanical bruising, infestation by microorganisms, wilting, etc. Appropriate packing prevents excessive mass loss associated to transpiration as well as to respiration, by controlling gas exchanging with outside environment. Common packing materials are identified as plastic films, waxes and biofilms. Although research developed with edible films and biopolymers has increased during last years to attend the food industry demands, avoiding environmental problems, little efforts have been reported on biofilm physical properties investigations. These properties, as drying time and biofilm interactions with environment are considered of basic importance. This research work aimed to contribute to development of a methodology to evaluate yucca (Maniot vulgaris) based biofilms drying time supported by a biospeckle technique. Biospeckle is a phenomenon generated by a laser beam scattered on a dynamic active surface, producing a time varying pattern which is proportional to the surface activity level. By capturing and processing the biospeckle image it is possible to attribute a numerical quantity to the surface bioactivity. Materials exhibiting high moisture content will also show high activity, which will support the drying time determination. Tests were set by placing biofilm samples on polyetilen plates and further submitted to laser exposition at four hours interval to capture the pattern images, generating the Intensities Dispersion Modulus. Results indicates that proposed methodology is applicable in determining biofilm drying time as well as vapor losses to environment.

  11. Tenderness indicators in salted and dried meat: a review

    Directory of Open Access Journals (Sweden)

    Yuri Montenegro Ishihara

    2014-02-01

    Full Text Available Salted and dried meats are known and appreciated worldly. Their consumption is often associated to certain groups of people or particular regions, and due to this, they can be called traditional. They usually have simple technology, passed on from generation to generation and for this reason, there is much variation in the quality of these products. In Brazil charque, jerked beef and sun-dried meat stand out. Biltong, cecina de León, kilishi, kaddid and bresaola are other examples of salted and dried meats. Despite the importance of these meat products, there are no specific studies on their tenderness. Since tenderness is one of the attributes most reported by consumers, research may help the acceptance of meat products, increasing their demand. In this context, this review presents the characteristics of traditional salted and dried meat products related to processing aspects and suggested tenderness indicators - shear force, myofibrillar fragmentation index, sarcomere length, collagen quantification – to assess the softness of meat products, since they are easy to apply and include the study of the main responsible for meat softness, myofibrillar and connective tissue proteins.

  12. DRYING WITH SOLAR COLLECTOR BY HEAT PIPE

    Directory of Open Access Journals (Sweden)

    Hikmet DOĞAN

    1999-01-01

    Full Text Available In this research, heating pipe was used in the solar collector in order to take better advantage of the solar energy. The energy obtained from the sun was transferred to the drying air by means of heating pipes and this hot air was blown on the material to be dried. The water on the material to be dried vaporised with the effect of the hot air and drying took place. Because drying took place in the shade, distant from the direct radiation effects of the sun, some of the disadvantages seen in drying outside, under the sun were eliminated. Additionally, it was observed that it took less time to dry in this method than it takes to dry under the open sun.

  13. ENVIRONMENTAL ASPECTS OF THE INTENSIFICATION CONVECTIVE DRYING

    Directory of Open Access Journals (Sweden)

    A. M. Gavrilenkov

    2012-01-01

    Full Text Available Identified and analyzed the relationship of the intensity convective drying and air pollution emissions of heat. The ways to reduce the thermal pollution of the atmosphere at convective drying.

  14. Dry needling — peripheral and central considerations

    OpenAIRE

    Dommerholt, Jan

    2011-01-01

    Dry needling is a common treatment technique in orthopedic manual physical therapy. Although various dry needling approaches exist, the more common and best supported approach targets myofascial trigger points. This article aims to place trigger point dry needling within the context of pain sciences. From a pain science perspective, trigger points are constant sources of peripheral nociceptive input leading to peripheral and central sensitization. Dry needling cannot only reverse some aspects...

  15. Drying and color characteristics of coriander foliage using convective thin-layer and microwave drying.

    Science.gov (United States)

    Shaw, Mark; Meda, Venkatesh; Tabil, Lope; Opoku, Anthony

    2007-01-01

    Heat sensitive properties (aromatic, medicinal, color) provide herbs and spices with their high market value. In order to prevent extreme loss of heat sensitive properties when drying herbs, they are normally dried at low temperatures for longer periods of time to preserve these sensory properties. High energy consumption often results from drying herbs over a long period. Coriander (Coriandrum sativum L., Umbelliferae) was dehydrated in two different drying units (thin layer convection and microwave dryers) in order to compare the drying and final product quality (color) characteristics. Microwave drying of the coriander foliage was faster than convective drying. The entire drying process took place in the falling rate period for both microwave and convective dried samples. The drying rate for the microwave dried samples ranged from 42.3 to 48.2% db/min and that of the convective dried samples ranged from 7.1 to 12.5% db/min. The fresh sample color had the lowest L value at 26.83 with higher L values for all dried samples. The results show that convective thin layer dried coriander samples exhibited a significantly greater color change than microwave dried coriander samples. The color change index values for the microwave dried samples ranged from 2.67 to 3.27 and that of the convective dried samples varied from 4.59 to 6.58.

  16. Generating Units

    Data.gov (United States)

    Department of Homeland Security — Generating Units are any combination of physically connected generators, reactors, boilers, combustion turbines, and other prime movers operated together to produce...

  17. energetic performance analysis of drying agricultural products ...

    African Journals Online (AJOL)

    user

    1,2,3,4DEPARTMENT OF MECHANICAL ENGINEERING, UNIVERSITY OF ILORIN, P.M.B. 1515, ILORIN, ... drying and moldy food [9]. ... solar drying systems diversely in operation are ... 2.1 Useful Energy Required for Drying A Unit Amount.

  18. 21 CFR 131.149 - Dry cream.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Dry cream. 131.149 Section 131.149 Food and Drugs... CONSUMPTION MILK AND CREAM Requirements for Specific Standardized Milk and Cream § 131.149 Dry cream. (a) Description. Dry cream is the product obtained by removal of water only from pasteurized milk or cream or...

  19. Drying of willow biomass in supply chains

    NARCIS (Netherlands)

    Gigler, J.K.

    2000-01-01

    The drying process of willow ( Salix viminalis ) in biomass supply chains to energy plants is quantitatively described. Drying at particle level was modelled for chips and stems by a diffusion equation linked to the mass transfer of moisture to the air. Drying at bulk level is described by a deep be

  20. Drying of willow biomass in supply chains

    NARCIS (Netherlands)

    Gigler, J.

    2000-01-01

    The drying process of willow ( Salix viminalis ) in biomass supply chains to energy plants is quantitatively described. Drying at particle level was modelled for chips and stems by a diffusion equation linked to the mass transfer of moisture to the air. Drying at bulk

  1. An Internally Heated Shape Memory Polymer Dry Adhesive

    Directory of Open Access Journals (Sweden)

    Jeffrey Eisenhaure

    2014-08-01

    Full Text Available A conductive epoxy-based shape memory polymer (SMP is demonstrated using carbon black (CB as a dopant for the purpose of creating an SMP dry adhesive system which can internally generate the heat required for activation. The electrical and mechanical properties of the CB/SMP blends for varying dopant concentrations are characterized. A composite adhesive is created to minimize surface contact resistance to conductive tape acting as electrodes, while maintaining bulk resistivity required for heat generation due to current flow. The final adhesive can function on flat or curved surfaces. As a demonstration, a 25 mm wide by 45 mm long dry adhesive strip is shown to heat evenly from an applied voltage, and can easily hold a mass in excess of 6 kg when bonded to a spherical concave glass surface using light pressure at 75 °C.

  2. Modeling a Dry Etch Process for Large-Area Devices

    Energy Technology Data Exchange (ETDEWEB)

    Buss, R.J.; Hebner, G.A.; Ruby, D.S.; Yang, P.

    1999-07-28

    There has been considerable interest in developing dry processes which can effectively replace wet processing in the manufacture of large area photovoltaic devices. Environmental and health issues are a driver for this activity because wet processes generally increase worker exposure to toxic and hazardous chemicals and generate large volumes of liquid hazardous waste. Our work has been directed toward improving the performance of screen-printed solar cells while using plasma processing to reduce hazardous chemical usage.

  3. Single droplet drying for optimal spray drying of enzymes and probiotics

    NARCIS (Netherlands)

    Schutyser, M.A.I.; Perdana, J.A.; Boom, R.M.

    2012-01-01

    Spray drying is a mild and cost-effective convective drying method. It can be applied to stabilise heat sensitive ingredients, such as enzymes and probiotic bacteria, albeit in industrial practice for example freeze drying or freezing are often preferred. The reason is that optimum drying conditions

  4. Dry Transfer Systems for Used Nuclear Fuel

    Energy Technology Data Exchange (ETDEWEB)

    Brett W. Carlsen; Michaele BradyRaap

    2012-05-01

    The potential need for a dry transfer system (DTS) to enable retrieval of used nuclear fuel (UNF) for inspection or repackaging will increase as the duration and quantity of fuel in dry storage increases. This report explores the uses for a DTS, identifies associated general functional requirements, and reviews existing and proposed systems that currently perform dry fuel transfers. The focus of this paper is on the need for a DTS to enable transfer of bare fuel assemblies. Dry transfer systems for UNF canisters are currently available and in use for transferring loaded canisters between the drying station and storage and transportation casks.

  5. Generational diversity.

    Science.gov (United States)

    Kramer, Linda W

    2010-01-01

    Generational diversity has proven challenges for nurse leaders, and generational values may influence ideas about work and career planning. This article discusses generational gaps, influencing factors and support, and the various generational groups present in today's workplace as well as the consequences of need addressing these issues. The article ends with a discussion of possible solutions.

  6. Impregnation of leather during "freeze-drying"

    DEFF Research Database (Denmark)

    Storch, Mikkel; Vestergaard Poulsen Sommer, Dorte; Hovmand, Ida

    2016-01-01

    Freeze-drying is a recognized method for the preservation of waterlogged objects. Naturally, freeze-drying has also been used for waterlogged archaeological leather often after treatment with Na2.EDTA and impregnation with PEG; but the treated leather sometimes suffers from “excessive drying......” becoming too stiff and brittle. The aim of this study was to examine the effect of a conventional freeze-drying method against an alternative freeze-drying method that preserves the natural moisture content of the leather. Both new and archaeological waterlogged leather were included in the study...... suggest that the process which takes place within the leather during the freeze-drying in not actual freeze-drying, but rather a sophisticated way of distributing the impregnating agent. The pure ice phase freezes out, but the impregnating agent remains liquid as the temperature does not become low enough...

  7. Characteristic Drying Curve of Oil Palm Fibers

    Directory of Open Access Journals (Sweden)

    Ifa Puspasari

    2014-03-01

    Full Text Available The drying of crushed oil palm fronds was studied in a fluidized bed dryer assisted with mechanical agitation at different inlet air temperature, superficial air velocity, bed loading and agitation speed. The drying kinetics of the fibers under various drying conditions could be described by a single characteristic drying curve. A combined exponential and power law model is proposed to represent the characteristic drying curve which described both the increasing rate and the falling rate periods. The proposed model is also tested for drying kinetics of oil palm empty fruit bunch from previous researcher. It was found that the characteristic curve for both oil palm fronds and empty fruit bunch fibers has similar shape and that the proposed model is acceptable for describing the complete drying characteristics of the fibers.

  8. Dry spell frequency in West Java, Indonesia

    Science.gov (United States)

    Purnaningtyas, V. I.; Boer, R.; Faqih, A.

    2017-03-01

    The climatology and variability of dry spells are valuable information for scientists, engineers, planners, and managers working in water-related sectors such as agriculture, ecology, hydrology, and water resources. The dry spell concerns consecutive dry days which are the largest number of consecutive days with less than 1 mm of daily precipitation within a year. The objective of this study is to analyse the spatial and temporal characteristics of dry spells and also specifically investigate the frequency patterns of the dry spell distribution based on historical observed daily precipitation from 1981 to 2010. The longest dry spell occured at Pasirukem with the length of 252 days. The northern coast of West Java have higher probabilities of dry spells more than 5, 10, 15, and 20 days.

  9. Acousto-Convective Drying of Pine Nuts

    Science.gov (United States)

    Zhilin, A. A.; Fedorov, A. V.

    2014-07-01

    An experimental investigation of the process of drying pine nut grains has been carried out by three methods: acousto-convective, thermoconvective, and thermal. A qualitative and a quantitative comparison of the dynamics of the processes of moisture extraction from the nut grains for the considered drying methods have been made. To elucidate the mechanism of moisture extraction from the pine nut grains, we carried out a separate investigation of the process of drying the nut shell and the kernel. The obtained experimental data on the acousto-convective drying of nuts are well described by the relaxation model, the data on the thermoconvective drying are well described by the bilinear law, and the data on the thermal drying are well described by the combined method consisting of three time steps characterized by different kinetic regimes of drying.

  10. Short-term post-wildfire dry-ravel processes in a chaparral fluvial system

    Science.gov (United States)

    Florsheim, Joan L.; Chin, Anne; O'Hirok, Linda S.; Storesund, Rune

    2016-01-01

    Dry ravel, the transport of sediment by gravity, transfers material from steep hillslopes to valley bottoms during dry conditions. Following wildfire, dry ravel greatly increases in the absence of vegetation on hillslopes, thereby contributing to sediment supply at the landscape scale. Dry ravel has been documented as a dominant hillslope erosion mechanism following wildfire in chaparral environments in southern California. However, alteration after initial deposition is not well understood, making prediction of post-fire flood hazards challenging. The majority of Big Sycamore Canyon burned during the May 2013 Springs Fire leaving ash and a charred layer that covered hillslopes and ephemeral channels. Dry-ravel processes following the fire produced numerous deposits in the hillslope-channel transition zone. Field data focus on: 1) deposition from an initial post-wildfire dry-ravel pulse; and 2) subsequent alteration of dry ravel deposits over a seven-month period between September 2013 and April 2014. We quantify geomorphic responses in dry ravel deposits including responses during the one small winter storm that generated runoff following the fire. Field measurements document volumetric changes after initial post-wildfire deposition of sediment derived from dry ravel. Erosion and deposition mechanisms that occurred within dry-ravel deposits situated in the hillslope-channel transition zone included: 1) mobilization and transport of a portion or the entire deposit by fluvial erosion; 2) rilling on the surface of the unconsolidated deposits; 3) deposition on deposits via continued hillslope sediment supply; and 4) mass wasting that transfers sediment within deposits where surface profiles are near the angle of repose. Terrestrial LiDAR scanning point clouds were analyzed to generate profiles quantifying depth of sediment erosion or deposition over remaining dry ravel deposits after the first storm season. This study contributes to the understanding of potential

  11. Efficient Lignite-fired Power Generation Technology Based on Open Pulverizing Systems With Flue Gas Drying Fan Mill and Recovery of Heat and Water From Pulverizing Exhaust%基于炉烟干燥及水回收风扇磨仓储式制粉系统的高效褐煤发电技术

    Institute of Scientific and Technical Information of China (English)

    马有福; 郭晓克; 肖峰; 施登宇

    2013-01-01

    提出了一种基于炉烟干燥及水回收风扇磨仓储式制粉系统的高效褐煤发电技术,并以某在役600 MW超临界褐煤(全水分39.5%)机组为对比工程,对应用炉烟干燥及水回收仓储式制粉系统的安全性、节能性及水回收效益进行了计算比较和分析讨论.结果表明:该技术可降低机组标煤发电煤耗10 g/(kW·h)左右,同时锅炉岛投资有所减小,厂用电基本不变;通过高湿制粉乏气的冷却,可回收大量原煤中水资源,若将其用于补充电厂水耗,有望实现“零水耗”褐煤电厂;以惰性烟气为制粉系统干燥剂,解决了困扰燃褐煤机组安全运行的制粉系统爆炸问题;在实现上述效果的同时,未产生新的污染物排放.该技术工艺及设备成熟,工程可行性佳;而且与以提高蒸汽参数为主要思路的超临界、超超临界、二次再热及700℃发电技术均可组合应用.该技术对加快褐煤产区电源基地建设和改善当地生态环境具有重大社会意义和显著经济效益,是值得深入研究与推广应用的绿色高效燃煤发电技术.%This paper advanced an efficient lignite-fired power generation technology based on open pulverizing system with flue gas drying fan mill and recovery of heat and water from pulverizing exhaust. In order to demonstrate the security, energy saving and water recovery advantages of this new technology, a detailed comparative calculation and analysis was performed by comparison with an operating 600 MW power generating unit which fired Chinese lignite with total moisture 39.5% and applied traditional direct-fired pulverizing system. The calculation results show that the gross standard coal consumption rate could be reduced about 10 g/(kWh) by applying this new technology, meanwhile the investment of boiler island could be slightly reduced and the service power remained unchanged on the whole. On the other hand, a mass of water resource could be recovered from

  12. Dry etching technology for semiconductors

    CERN Document Server

    Nojiri, Kazuo

    2015-01-01

    This book is a must-have reference to dry etching technology for semiconductors, which will enable engineers to develop new etching processes for further miniaturization and integration of semiconductor integrated circuits.  The author describes the device manufacturing flow, and explains in which part of the flow dry etching is actually used. The content is designed as a practical guide for engineers working at chip makers, equipment suppliers and materials suppliers, and university students studying plasma, focusing on the topics they need most, such as detailed etching processes for each material (Si, SiO2, Metal etc) used in semiconductor devices, etching equipment used in manufacturing fabs, explanation of why a particular plasma source and gas chemistry are used for the etching of each material, and how to develop etching processes.  The latest, key technologies are also described, such as 3D IC Etching, Dual Damascene Etching, Low-k Etching, Hi-k/Metal Gate Etching, FinFET Etching, Double Patterning ...

  13. Enhancement of drying and rehydration characteristics of okra by ultrasound pre-treatment application

    Science.gov (United States)

    Tüfekçi, Senem; Özkal, Sami Gökhan

    2017-02-01

    Effect of ultrasound application prior to hot air drying on drying and rehydration kinetics, rehydration ratio and microstructure of okra slices were investigated. For this purpose, the selected parameters are ultrasound pre-treatment time (10, 20 and 30 min), ultrasound amplitude (55 and 100%) and the temperature of drying air (60 and 70 °C). 5 mm thick cylindrical shaped okra slices were used in the experiments. The samples were immersed in water and ultrasonic pre-treatments were done in water with ultrasonic probe connected to an ultrasonic generator with 20 kHz frequency. Pre-treated samples were dried in a tray drier with a 0.3 m/s air velocity. Ultrasound pre-treatment affected the drying rate of the okra slices significantly. Drying time of okra slices was decreased by the application of ultrasound pre-treatment. Modified Page model found to be the most suitable model for describing the drying characteristics of okra slices. Improvements in rehydration properties of the dried samples were observed due to the ultrasound pre-treatment. The influence of the ultrasound pre-treatment on microstructure was clearly observed through scanning electron microscopy images of the dried samples. As the amplitude of ultrasound increased the changes in structure of the okra tissue increased.

  14. Total phenolics, antioxidant capacity, colour and drying characteristics of date fruit dried with different methods

    Directory of Open Access Journals (Sweden)

    Gökçen İZLİ

    2016-01-01

    Full Text Available Abstract Date slices were dried with the three drying methods convective (60, 70 and 80 °C, microwave (120 W and freeze drying to determine drying characteristics and to compare the dried fruit quality. All colour parameters changed depending on the drying method and colours closest to the fresh sample were obtained with freeze drying. It is interesting to note that the total phenolic content and antioxidant capacity in each sample rose when looked at in relation to the fresh sample. In particular, microwave-dried samples were recorded as having the highest total phenolic content and the highest antioxidant capacity. To explain the drying kinetics of the date slices, nine thin-layer drying models were also attempted. Based on statistical tests, the model developed by Midilli et al. model was found to be the best model for convective and microwave drying, but the Two Term model was the best for freeze drying. This study shows that microwave drying can produce high quality date slices with the additional advantage of reduced drying times compared to convective and freeze drying.

  15. Low damage dry etch for III-nitride light emitters

    Science.gov (United States)

    Nedy, Joseph G.; Young, Nathan G.; Kelchner, Kathryn M.; Hu, Yanling; Farrell, Robert M.; Nakamura, Shuji; DenBaars, Steven P.; Weisbuch, Claude; Speck, James S.

    2015-08-01

    We have developed a dry etch process for the fabrication of lithographically defined features close to light emitting layers in the III-nitride material system. The dry etch was tested for its effect on the internal quantum efficiency of c-plane InGaN quantum wells using the photoluminescence of a test structure with two active regions. No change was observed in the internal quantum efficiency of the test active region when the etched surface was greater than 71 nm away. To demonstrate the application of the developed dry etch process, surface-etched air gaps were fabricated 275 nm away from the active region of an m-plane InGaN/GaN laser diode and served as the waveguide upper cladding. Electrically injected lasing was observed without the need for regrowth or recovery anneals. This dry etch opens up a new design tool that can be utilized in the next generation of GaN light emitters.

  16. Thermoplastic dry polymer powder prepregging

    Energy Technology Data Exchange (ETDEWEB)

    Bucher, R.A.; Loos, A.C.; Meyer, G. [Virginia Polytechnic Institute and State Univ., Blacksburg, VA (United States)] [and others

    1995-12-01

    Thermoplastic resin systems have shown potential for reducing the manufacturing costs and improving the damage tolerance of composite structures. Current methods for thermoplastic resin impregnation of fiber bundles are limited by various difficulties and thus produce poor quality prepregs. The emerging technology of fiber is one of the most promising options, producing excellent matrix drape, and feasibility for a wide variety of matrix systems. An electrostatic dry polymer powder prepregging system was developed at the NSF Science and Technology Center at Virginia Tech, and has been used to produce high quality thermoplastic towpreg from a wide variety o polymer matrices. Additionally, a modification of the system allows for the production of towpreg from 15 gram polymer samples. This is ideal for the production of composites from resin systems under development, allowing early feedback concerning processing and composite mechanical performance.

  17. Dry fermentation of agricultural residues

    Science.gov (United States)

    Jewell, W. J.; Chandler, J. A.; Dellorto, S.; Fanfoni, K. J.; Fast, S.; Jackson, D.; Kabrick, R. M.

    1981-09-01

    A dry fermentation process is discussed which converts agricultural residues to methane, using the residues in their as produced state. The process appears to simplify and enhance the possibilities for using crop residues as an energy source. The major process variables investigated include temperature, the amount and type of inoculum, buffer requirements, compaction, and pretreatment to control the initial available organic components that create pH problems. A pilot-scale reactor operation on corn stover at a temperature of 550 C, with 25 percent initial total solids, a seed-to-feed ratio of 2.5 percent, and a buffer-to-feed ratio of 8 percent achieved 33 percent total volatile solids destruction in 60 days. Volumetric biogas yields from this unit were greater than 1 vol/vol day for 12 days, and greater than 0.5 vol/vol day for 32 days, at a substrate density of 169 kg/m (3).

  18. Setting up the drying regimes based on the theory of moisture migration during drying

    Science.gov (United States)

    Vasić, M.; Radojević, Z.

    2016-08-01

    Drying is energy intensive process which has important effect on the quality of the clay tiles that are dried commercially. Chamber and tunnel dryers are constantly improving. Better technical equipment and operational strategies have lead to higher quality of the dried clay products. The moisture migration during isothermal drying process can be visually traced on the curve that represents the relationship between variable effective moisture diffusivity (MR) with time (t). Proposed non isothermal drying regimes were consisted from several isothermal segments. For the first time, the choice of isothermal segments specification and its duration was not specified by experience or by trial-and-error method. It was detected from the isothermal curves Deff - MR in accordance with the theory of moisture migration during drying. Proposed drying regimes were tested. Clay roofing tiles were dried without cracks. Dried clay roofing tiles has satisfied all requirements defined in EN 1304 norm related to the shape regularity and mechanical properties.

  19. A statistical approach to optimize the spray drying of starch particles: application to dry powder coating.

    Science.gov (United States)

    Bilancetti, Luca; Poncelet, Denis; Loisel, Catherine; Mazzitelli, Stefania; Nastruzzi, Claudio

    2010-09-01

    This article describes the preparation of starch particles, by spray drying, for possible application to a dry powder coating process. Dry powder coating consists of spraying a fine powder and a plasticizer on particles. The efficiency of the coating is linked to the powder morphological and dimensional characteristics. Different experimental parameters of the spray-drying process were analyzed, including type of solvent, starch concentration, rate of polymer feeding, pressure of the atomizing air, drying air flow, and temperature of drying air. An optimization and screening of the experimental parameters by a design of the experiment (DOE) approach have been done. Finally, the produced spray-dried starch particles were conveniently tested in a dry coating process, in comparison to the commercial initial starch. The obtained results, in terms of coating efficiency, demonstrated that the spray-dried particles led to a sharp increase of coating efficiency value.

  20. CO2 (dry ice) cleaning system

    Science.gov (United States)

    Barnett, Donald M.

    1995-03-01

    Tomco Equipment Company has participated in the dry ice (solid carbon dioxide, CO2) cleaning industry for over ten years as a pioneer in the manufacturer of high density, dry ice cleaning pellet production equipment. For over four years Tomco high density pelletizers have been available to the dry ice cleaning industry. Approximately one year ago Tomco introduced the DI-250, a new dry ice blast unit making Tomco a single source supplier for sublimable media, particle blast, cleaning systems. This new blast unit is an all pneumatic, single discharge hose device. It meters the insertion of 1/8 inch diameter (or smaller), high density, dry ice pellets into a high pressure, propellant gas stream. The dry ice and propellant streams are controlled and mixed from the blast cabinet. From there the mixture is transported to the nozzle where the pellets are accelerated to an appropriate blasting velocity. When directed to impact upon a target area, these dry ice pellets have sufficient energy to effectively remove most surface coatings through dry, abrasive contact. The meta-stable, dry ice pellets used for CO2 cleaning, while labeled 'high density,' are less dense than alternate, abrasive, particle blast media. In addition, after contacting the target surface, they return to their equilibrium condition: a superheated gas state. Most currently used grit blasting media are silicon dioxide based, which possess a sharp tetrahedral molecular structure. Silicon dioxide crystal structures will always produce smaller sharp-edged replicas of the original crystal upon fracture. Larger, softer dry ice pellets do not share the same sharp-edged crystalline structures as their non-sublimable counterparts when broken. In fact, upon contact with the target surface, dry ice pellets will plastically deform and break apart. As such, dry ice cleaning is less harmful to sensitive substrates, workers and the environment than chemical or abrasive cleaning systems. Dry ice cleaning system

  1. Instant Generation

    Science.gov (United States)

    Loveland, Elaina

    2017-01-01

    Generation Z students (born between 1995-2010) have replaced millennials on college campuses. Generation Z students are entrepreneurial, desire practical skills with their education, and are concerned about the cost of college. This article presents what need to be known about this new generation of students.

  2. Dry needling - peripheral and central considerations.

    Science.gov (United States)

    Dommerholt, Jan

    2011-11-01

    Dry needling is a common treatment technique in orthopedic manual physical therapy. Although various dry needling approaches exist, the more common and best supported approach targets myofascial trigger points. This article aims to place trigger point dry needling within the context of pain sciences. From a pain science perspective, trigger points are constant sources of peripheral nociceptive input leading to peripheral and central sensitization. Dry needling cannot only reverse some aspects of central sensitization, it reduces local and referred pain, improves range of motion and muscle activation pattern, and alters the chemical environment of trigger points. Trigger point dry needling should be based on a thorough understanding of the scientific background of trigger points, the differences and similarities between active and latent trigger points, motor adaptation, and central sensitize application. Several outcome studies are included, as well as comments on dry needling and acupuncture.

  3. Dry needling — peripheral and central considerations

    Science.gov (United States)

    Dommerholt, Jan

    2011-01-01

    Dry needling is a common treatment technique in orthopedic manual physical therapy. Although various dry needling approaches exist, the more common and best supported approach targets myofascial trigger points. This article aims to place trigger point dry needling within the context of pain sciences. From a pain science perspective, trigger points are constant sources of peripheral nociceptive input leading to peripheral and central sensitization. Dry needling cannot only reverse some aspects of central sensitization, it reduces local and referred pain, improves range of motion and muscle activation pattern, and alters the chemical environment of trigger points. Trigger point dry needling should be based on a thorough understanding of the scientific background of trigger points, the differences and similarities between active and latent trigger points, motor adaptation, and central sensitize application. Several outcome studies are included, as well as comments on dry needling and acupuncture. PMID:23115475

  4. Thin layer convection-drying of mushrooms

    Energy Technology Data Exchange (ETDEWEB)

    Pal, U.S.; Chakraverty, A. [Indian Inst. of Tech., Kharagpur (India). Dept. of Agricultural Engineering

    1997-06-01

    Dehydration characteristics of the Oyster Pleurotus variety of mushroom were studied. Both untreated and treated (steam blanching followed by sulphiting and citric acid pretreatment before drying) mushrooms were dried in the thin layer experimental equipment at each of the drying air temperatures of 45, 50 and 60{sup o}C with air velocities of 0.9 and 1.6 m/s. Studies on the equilibrium moisture content (EMC) of both untreated and treated dehydrated mushrooms were performed at different relative humidities ranging from 11.2 to 86.3% at 30{sup o}C. Taking drying time and quality of the dehydrated product into account, a combination of a drying air temperature of 50{sup o}C and an air velocity of 0.9 m/s appears to be suitable for drying of both untreated and treated mushrooms for a good dehydrated product. (author)

  5. Developmental Tendency of Dry Land Farming Technologies

    Institute of Scientific and Technical Information of China (English)

    SHAN Lun

    2002-01-01

    The developmental tendency of dry land farming technologies in the semiarid area of China were reviewed based on the overview of recent progress in dry land farming researches from China and oversea. It was emphasized that conservation tillage, limited irrigation, genetic modification and chemical control are the important aspects for the dry land farming research and development of the future. In addition, some considerations and suggestions on above-mentioned aspects were proposed in this paper.

  6. Wood colour related to kiln drying

    OpenAIRE

    Sundqvist, Bror

    2000-01-01

    Raised temperature in artificial drying has led to some changes of wood products such as colour and strength etc. For special treatment of wood-products with clearly modified properties, among them colour, is often high temperature and steam used industrially. Knowledge about the colour rendering from wood that is subjected to heat under humid conditions and/or artificial drying, especially kiln drying, is thus of interest. It is also of interest to understand the chemical background, for the...

  7. Thin layer drying of tomato slices.

    Science.gov (United States)

    Das Purkayastha, Manashi; Nath, Amit; Deka, Bidyut Chandra; Mahanta, Charu Lata

    2013-08-01

    The hot air convective drying characteristics of blanched tomato (Lycopersicon esculantum L.) slices have been investigated. Drying experiments were carried out at four different temperatures (50, 60, 65 and 70 °C). The effect of drying temperatures on the drying behavior of the tomato slices was evaluated. All drying experiments had only falling rate period. The average effective diffusivity values varied from 0.5453 × 10(-9) to 2.3871 × 10(-9) m(2)/s over the temperature range studied and the activation energy was estimated to be 61.004 kJ/mol. In order to select a suitable form of the drying curve, six different thin layer drying models (Henderson-Pabis, Page, Diamante et al., Wang and Singh, Logarithmic and Newton models) were fitted to the experimental data. The goodness of fit tests indicated that the Logarithmic model gave the best fit to experimental results, which was closely followed by the Henderson-Pabis model. The influence of varied drying temperatures on quality attributes of the tomato slices viz. Hunter color parameters, ascorbic acid, lycopene, titratable acidity, total sugars, reducing sugars and sugar/acid ratio of dried slices was also studied. Slices dried at 50 and 60 °C had high amount of total sugars, lycopene, sugar/acid ratio, Hunter L- and a-values. Drying of slices at 50 °C revealed optimum retention of ascorbic acid, sugar/acid ratio and red hue, whereas, drying at higher temperature (65 and 70 °C) resulted in a considerable decrease in nutrients and colour quality of the slices.

  8. MODELLING OF THIN LAYER DRYING KINETICS OF COCOA BEANS DURING ARTIFICIAL AND NATURAL DRYING

    Directory of Open Access Journals (Sweden)

    C.L. HII

    2008-04-01

    Full Text Available Drying experiments were conducted using air-ventilated oven and sun dryer to simulate the artificial and natural drying processes of cocoa beans. The drying data were fitted with several published thin layer drying models. A new model was introduced which is a combination of the Page and two-term drying model. Selection of the best model was investigated by comparing the determination of coefficient (R2, reduced chi-square (2 and root mean square error (RMSE between the experimental and predicted values. The results showed that the new model was found best described the artificial and natural drying kinetics of cocoa under the conditions tested.

  9. High-efficiency filtration in dry/semi-dry FGD plants

    Energy Technology Data Exchange (ETDEWEB)

    Popovici, Florin [Evonik Fibres GmbH, Monza (Italy)

    2012-07-01

    Dry/semi-dry FGD plants are associated, in general, with a fabric filter plant. The paper highlights the importance of specific fibre properties like cross section and titre associated with the filtration requirements and the filter material chemical resistance for dry/semi-dry FGD process conditions in coal-fired boiler bag houses. References related to dry/semi-dry FGD plants applied to coal-fired boilers around the world are presented and include the performance evaluation of these plants, the type of filter media, plant design specifications, process parameters and particulate emission efficiency. (orig.)

  10. Origin of Rigidity in Dry Granular Solids

    Science.gov (United States)

    Sarkar, Sumantra; Bi, Dapeng; Zhang, Jie; Behringer, R. P.; Chakraborty, Bulbul

    2013-08-01

    Solids are distinguished from fluids by their ability to resist shear. In traditional solids, the resistance to shear is associated with the emergence of broken translational symmetry as exhibited by a nonuniform density pattern. In this work, we focus on the emergence of shear rigidity in a class of solids where this paradigm is challenged. Dry granular materials have no energetically or entropically preferred density modulations. We show that, in contrast to traditional solids, the emergence of shear rigidity in these granular solids is a collective process, which is controlled solely by boundary forces, the constraints of force and torque balance, and the positivity of the contact forces. We develop a theoretical framework based on these constraints, which connects rigidity to broken translational symmetry in the space of forces, not positions of grains. We apply our theory to experimentally generated shear-jammed states and show that these states are indeed characterized by a persistent, non-uniform density modulation in force space, which emerges at the shear-jamming transition.

  11. Dry etching technologies for reflective multilayer

    Science.gov (United States)

    Iino, Yoshinori; Karyu, Makoto; Ita, Hirotsugu; Kase, Yoshihisa; Yoshimori, Tomoaki; Muto, Makoto; Nonaka, Mikio; Iwami, Munenori

    2012-11-01

    We have developed a highly integrated methodology for patterning Extreme Ultraviolet (EUV) mask, which has been highlighted for the lithography technique at the 14nm half-pitch generation and beyond. The EUV mask is characterized as a reflective-type mask which is completely different compared with conventional transparent-type of photo mask. And it requires not only patterning of absorber layer without damaging the underlying multi reflective layers (40 Si/Mo layers) but also etching multi reflective layers. In this case, the dry etch process has generally faced technical challenges such as the difficulties in CD control, etch damage to quartz substrate and low selectivity to the mask resist. Shibaura Mechatronics ARESTM mask etch system and its optimized etch process has already achieved the maximal etch performance at patterning two-layered absorber. And in this study, our process technologies of multi reflective layers will be evaluated by means of optimal combination of process gases and our optimized plasma produced by certain source power and bias power. When our ARES™ is used for multilayer etching, the user can choose to etch the absorber layer at the same time or etch only the multilayer.

  12. FINAL REPORT: Transformational electrode drying process

    Energy Technology Data Exchange (ETDEWEB)

    Claus Daniel, C.; Wixom, M.(A123 Systems, Inc.)

    2013-12-19

    This report includes major findings and outlook from the transformational electrode drying project performance period from January 6, 2012 to August 1, 2012. Electrode drying before cell assembly is an operational bottleneck in battery manufacturing due to long drying times and batch processing. Water taken up during shipment and other manufacturing steps needs to be removed before final battery assembly. Conventional vacuum ovens are limited in drying speed due to a temperature threshold needed to avoid damaging polymer components in the composite electrode. Roll to roll operation and alternative treatments can increase the water desorption and removal rate without overheating and damaging other components in the composite electrode, thus considerably reducing drying time and energy use. The objective of this project was the development of an electrode drying procedure, and the demonstration of processes with no decrease in battery performance. The benchmark for all drying data was an 80°C vacuum furnace treatment with a residence time of 18 – 22 hours. This report demonstrates an alternative roll to roll drying process with a 500-fold improvement in drying time down to 2 minutes and consumption of only 30% of the energy compared to vacuum furnace treatment.

  13. Cold vacuum drying facility design requirements

    Energy Technology Data Exchange (ETDEWEB)

    IRWIN, J.J.

    1999-07-01

    This document provides the detailed design requirements for the Spent Nuclear Fuel Project Cold Vacuum Drying Facility. Process, safety, and quality assurance requirements and interfaces are specified.

  14. Drying kinetics of some building materials

    Directory of Open Access Journals (Sweden)

    A. Moropoulou

    2005-06-01

    Full Text Available Moisture is one of the most deteriorating factors of buildings. The deteriorating effect of moisture occurs mainly during the drying phase, and not in the wetting phase. Appropriate parameters of the drying kinetics are required for the building materials. Environmental factors, such as air temperature, air humidity, and air velocity affect drying. An experimental air dryer of controlled drying air conditions was used to investigate the drying performance of 4 stone materials, 2 bricks and 7 plasters. Drying kinetics was examined at 4 air temperatures, 6 air humidities, and 3 air velocities. A first-order kinetics model was obtained, in which the drying time constant was a function of the drying conditions, and the equilibrium material moisture content was described by the Oswin equation. The parameters of the proposed model were found to be affected strongly by the material and the drying air conditions. The results obtained are very useful in selecting the appropriate plaster to protect existing historic buildings.

  15. Morphological Characteristics of Korean Dried Ginseng Products

    National Research Council Canada - National Science Library

    Hee-Do Hong; Chang-Woon Cho; Young-Chan Kim; Eunyoung Kim; Young-Kyung Rhee; Jeonghae Rho; Seung-Hoe Choi

    2012-01-01

    The purpose of this study was to determine a standard quality characteristic through the evaluation and statistical analysis of the morphological characteristics of dried ginseng (white ginseng) products...

  16. Liquid Crystal Research Shows Deformation By Drying

    Science.gov (United States)

    2003-01-01

    These images, from David Weitz's liquid crystal research, show ordered uniform sized droplets (upper left) before they are dried from their solution. After the droplets are dried (upper right), they are viewed with crossed polarizers that show the deformation caused by drying, a process that orients the bipolar structure of the liquid crystal within the droplets. When an electric field is applied to the dried droplets (lower left), and then increased (lower right), the liquid crystal within the droplets switches its alignment, thereby reducing the amount of light that can be scattered by the droplets when a beam is shone through them.

  17. Dry Mouth? Don't Delay Treatment

    Science.gov (United States)

    ... American Dental Association: Dry Mouth Related Consumer Updates Depression: FDA-Approved Medications May Help More in Consumer Updates Animal & Veterinary Children's Health Cosmetics Dietary Supplements Drugs Food ...

  18. Recent developments in drying of food products

    Science.gov (United States)

    Valarmathi, T. N.; Sekar, S.; Purushothaman, M.; Sekar, S. D.; Rama Sharath Reddy, Maddela; Reddy, Kancham Reddy Naveen Kumar

    2017-05-01

    Drying is a dehydration process to preserve agricultural products for long period usage. The most common and cheapest method is open sun drying in which the products are simply laid on ground, road, mats, roof, etc. But the open sun drying has some disadvantages like dependent on good weather, contamination by dust, birds and animals consume a considerable quantity, slow drying rate and damages due to strong winds and rain. To overcome these difficulties solar dryers are developed with closed environment for drying agricultural products effectively. To obtain good quality food with reduced energy consumption, selection of appropriate drying process and proper input parameters is essential. In recent years several researchers across the world have developed new drying systems for improving the product quality, increasing the drying rate, decreasing the energy consumption, etc. Some of the new systems are fluidized bed, vibrated fluidized bed, desiccant, microwave, vacuum, freeze, infrared, intermittent, electro hydrodynamic and hybrid dryers. In this review the most recent progress in the field of drying of agricultural food products such as new methods, new products and modeling and optimization techniques has been presented. Challenges and future directions are also highlighted. The review will be useful for new researchers entering into this ever needed and ever growing field of engineering.

  19. Antioxidant Properties of Some Dried Fruits

    Directory of Open Access Journals (Sweden)

    Bilge Ertekin Filiz

    2014-03-01

    Full Text Available In this study, total phenolic content and antioxidant capacity of various dried fruits were investigated. Total phenolic content of dried fruits (apple, quince, peach, orange, grapefruit, kiwi, banana, watermelon, cantaloupe, strawberries and tomatoes were between 219-5386 mg GAE/kg in dry matter (dm. TEAC and ORAC values of the samples were between 7.01-126 µmol TE/g dm and 11.69-211 µmol TE/g dm, respectively. Dried fruits can be considered as an important source of antioxidant components in diet with the higher antioxidant properties.

  20. Drying of Pigment-Cellulose Nanofibril Substrates

    Directory of Open Access Journals (Sweden)

    Oleg Timofeev

    2014-10-01

    Full Text Available A new substrate containing cellulose nanofibrils and inorganic pigment particles has been developed for printed electronics applications. The studied composite structure contains 80% fillers and is mechanically stable and flexible. Before drying, the solids content can be as low as 20% due to the high water binding capacity of the cellulose nanofibrils. We have studied several drying methods and their effects on the substrate properties. The aim is to achieve a tight, smooth surface keeping the drying efficiency simultaneously at a high level. The methods studied include: (1 drying on a hot metal surface; (2 air impingement drying; and (3 hot pressing. Somewhat surprisingly, drying rates measured for the pigment-cellulose nanofibril substrates were quite similar to those for the reference board sheets. Very high dewatering rates were observed for the hot pressing at high moisture contents. The drying method had significant effects on the final substrate properties, especially on short-range surface smoothness. The best smoothness was obtained with a combination of impingement and contact drying. The mechanical properties of the sheets were also affected by the drying method and associated temperature.

  1. Solar drying of uruguayan red gum

    Directory of Open Access Journals (Sweden)

    Andrés Ono

    2011-04-01

    Full Text Available he use of solar energy as an alternative to non-renewable energy sources has been widely researched in the last decades. Compared to air drying, solar drying kilns can better control the drying process, resulting in a higher quality of the dry wood and lower final wood moisture content values. Investment and running costs for a solar drying kiln are lower than those of a conventional kiln. Moreover, the solar drying process can be advantageous for drying hardwoods which are traditionally considered difficult to dry such as eucalyptus wood of medium and high density (Red gums, known in Spanish as “Eucaliptos colorados”. The solar drying kiln naturally incorporates a daily high relative humidity period that can be similar to a conditioning or steaming step, although at a lower temperature.This results in fewer defects due to the drying process.A pilot scale 2.5 m3 semi-greenhouse type solar wood drying kiln was constructed at LATU (Uruguay Technological Laboratory in Montevideo, Uruguay. The operating conditions and the results from two drying runs are presented. Two species of red gum (Eucalyptus tereticornis Sm., ADD 870 kg/m3, and Eucalyptus camaldulensis Dehnh., ADD 800 kg/m3 were dried from initial average moisture contents (WMC of around 60% down to 10.0% and 12.7% in 108 days and 76 days, respectively. Boards were provided by the Grupo Forestal San Gregorio from trees harvested at Tacuarembo and Paysandu Departments from cattle shelter forests 60 and 70 years old.Mean volume shrinkage was 18% for E. tereticornis, and 16% for E. camaldulensis, and the level of defects was moderate. Residual stresses and moisture content gradients were observed for both species. Final moisture content values were similar compared to those obtained in conventional drying kilns but with longer drying periods and lower operating costs. This would make the solar drying process attractive to small and medium sized forest products industries in a small country

  2. Inulin sugar glasses preserve the structural integrity and biological activity of influenza virosomes during freeze-drying and storage

    NARCIS (Netherlands)

    de Jonge, Jørgen; Amorij, Jean-Pierre; Hinrichs, Wouter L.J.; Wilschut, Jan; Huckriede, Anke; Frijlink, Henderik W.

    2007-01-01

    Influenza virosomes are reconstituted influenza virus envelopes that may be used as vaccines or as carrier systems for cellular delivery of therapeutic molecules. Here we present a procedure to generate influenza virosomes as a stable dry-powder formulation by freeze-drying (lyophilization) using an

  3. A Hybrid Dry and Aqueous Fractionation Method to Obtain Protein-Rich Fractions from Quinoa (Chenopodium quinoa Willd)

    NARCIS (Netherlands)

    Avila Ruiz, Geraldine; Arts, Anke; Minor, Marcel; Schutyser, Maarten

    2016-01-01

    Combination of dry and aqueous fractionation is investigated to obtain protein-rich fractions from quinoa in a milder and more sustainable way compared to conventional wet fractionation. Dry fractionation of quinoa involved milling and subsequent air classification, generating a protein-enriched

  4. COMPARISON BETWEEN WOOD DRYING DEFECT SCORES: SPECIMEN TESTING X ANALYSIS OF KILN-DRIED BOARDS

    Directory of Open Access Journals (Sweden)

    Djeison Cesar Batista

    2015-04-01

    Full Text Available It is important to develop drying technologies for Eucalyptus grandis lumber, which is one of the most planted species of this genus in Brazil and plays an important role as raw material for the wood industry. The general aim of this work was to assess the conventional kiln drying of juvenile wood of three clones of Eucalyptus grandis. The specific aims were to compare the behavior between: i drying defects indicated by tests with wood specimens and conventional kiln-dried boards; and ii physical properties and the drying quality. Five 11-year-old trees of each clone were felled, and only flatsawn boards of the first log were used. Basic density and total shrinkage were determined, and the drying test with wood specimens at 100 °C was carried out. Kiln drying of boards was performed, and initial and final moisture content, moisture gradient in thickness, drying stresses and drying defects were assessed. The defect scoring method was used to verify the behavior between the defects detected by specimen testing and the defects detected in kiln-dried boards. As main results, the drying schedule was too severe for the wood, resulting in a high level of boards with defects. The behavior between the defects in the drying test with specimens and the defects of kiln-dried boards was different, there was no correspondence, according to the defect scoring method.

  5. Novel budesonide particles for dry powder inhalation (DPI) prepared using a microfluidic reactor coupled with ultrasonic spray freeze drying.

    Science.gov (United States)

    Saboti, Denis; Maver, Uroš; Chan, Hak-Kim; Planinšek, Odon

    2017-03-09

    Budesonide is a potent active pharmaceutical ingredient, often administered using respiratory devices such as metered dose inhalers (MDI), nebulizers and dry powder inhalers (DPI). Inhalable drug particles are conventionally produced by crystallization followed by milling. This approach tends to generate partially amorphous materials that require post-processing to improve the formulations' stability. Other methods involve homogenization or precipitation and often require the use of stabilizers, mostly surfactants. The purpose of this study was therefore to develop a novel method for preparation of fine budesonide particles using a microfluidic reactor coupled with ultrasonic spray freeze drying, and hence avoiding the need of additional homogenization or stabilizer use. A T-junction microfluidic reactor was employed to produce particle suspension (using an ethanol-water, methanol-water and an acetone-water system), which was directly fed into an ultrasonic atomization probe, followed by direct feeding to liquid nitrogen. Freeze drying was the final preparation step. The result were fine crystalline budesonide powders which, when blended with lactose and dispersed in an Aerolizer at 100 L/min, generated fine particle fraction in the range 47.6±2.8% to 54.9±1.8%, thus exhibiting a good aerosol performance. Subsequent sample analysis confirmed the suitability of the developed method to produce inhalable drug particles without additional homogenization or stabilizers. The developed method provides a viable solution for particle isolation in microfluidics in general.

  6. Advanced dry etching studies for micro- and nano-systems

    DEFF Research Database (Denmark)

    Rasmussen, Kristian Hagsted

    Dry etching is a collective term used for controlled material removal by means of plasma generated ions. Dry etching includes several techniques, with reactive ion etching as one of the most used of its many derivatives. In this work inductively coupled plasma reactive ion etching has been applied...... beam etching in a boron trichloride plasma. The etch rates of sapphire in such a plasma can be up to a hundred times faster than rates in ion beam etching. The anisotropy of the etch can be controlled by changing the plasma conditions and fabrication of sloped sidewalls can be achieved. Reactive ion...... etching of polymers can be used for several purposes, such as polymer removal, surface properties alternation, or polymer structuring. For material removal any polymer can be etched in an oxygen plasma, including all the polymers used in this project, which include, SU-8, TOPAS®, PLLA, PCL, and PMMA...

  7. Dry-film polymer waveguide for silicon photonics chip packaging.

    Science.gov (United States)

    Hsu, Hsiang-Han; Nakagawa, Shigeru

    2014-09-22

    Polymer waveguide made by dry film process is demonstrated for silicon photonics chip packaging. With 8 μm × 11.5 μm core waveguide, little penalty is observed up to 25 Gbps before or after the light propagate through a 10-km long single-mode fiber (SMF). Coupling loss to SMF is 0.24 dB and 1.31 dB at the polymer waveguide input and output ends, respectively. Alignment tolerance for 0.5 dB loss increase is +/- 1.0 μm along both vertical and horizontal directions for the coupling from the polymer waveguide to SMF. The dry-film polymer waveguide demonstrates promising performance for silicon photonics chip packaging used in next generation optical multi-chip module.

  8. USE OF COAL DRYING TO REDUCE WATER CONSUMED IN PULVERIZED COAL POWER PLANTS

    Energy Technology Data Exchange (ETDEWEB)

    Edward K. Levy; Nenad Sarunac; Harun Bilirgen; Hugo Caram

    2006-03-01

    U.S. low rank coals contain relatively large amounts of moisture, with the moisture content of subbituminous coals typically ranging from 15 to 30 percent and that for lignites from 25 and 40 percent. High fuel moisture has several adverse impacts on the operation of a pulverized coal generating unit, for it can result in fuel handling problems and it affects heat rate, stack emissions and maintenance costs. Theoretical analyses and coal test burns performed at a lignite fired power plant show that by reducing the fuel moisture, it is possible to improve boiler performance and unit heat rate, reduce emissions and reduce water consumption by the evaporative cooling tower. The economic viability of the approach and the actual impact of the drying system on water consumption, unit heat rate and stack emissions will depend critically on the design and operating conditions of the drying system. The present project evaluated the low temperature drying of high moisture coals using power plant waste heat to provide the energy required for drying. Coal drying studies were performed in a laboratory scale fluidized bed dryer to gather data and develop models on drying kinetics. In addition, analyses were carried out to determine the relative costs and performance impacts (in terms of heat rate, cooling tower water consumption and emissions) of drying along with the development of optimized drying system designs and recommended operating conditions.

  9. Effects of Pre-Treatment and Temperature on the Quality and Drying Rate of Tomatoes

    Directory of Open Access Journals (Sweden)

    R.A Iyanda

    2014-07-01

    Full Text Available The effect of pre-treatment and temperature on the quality and the drying rate of tomatos (Lycopersicon esculentus were studied. A 3× 5 factorial experiment in a randomized complete block (RCBD design was used. Firm and fresh ripe tomatoes were washed and sliced to a uniform thickness of 5mm, pre-treatment by boiling for 3 minutes was given to some of the sliced tomatoes while some were blanched by soaking in water at 90 0C for 3 minutes and the remaining part was dried raw. 200g each of the sample was dried at temperatures of 50, 55, 60, 65, and 70 0C in a cabinet drier until no moisture removal was observed. The moisture removal from the samples in the cabinet was observed and measured on an hourly basis and the vitamin C content of the dried samples was also analyzed. The results obtained for the drying rate and Vitamin C content were statistically analyzed using SPSS software to generate the ANOVA and DNMRT. It was found that samples dried at higher temperatures had higher drying rates irrespective of the pre-treatment. Raw samples and Samples dried at lower temperatures had better quality in terms of vitamin C retention.

  10. Cleaning properties of dry adhesives

    Institute of Scientific and Technical Information of China (English)

    J.; P.; DíAZ; TéLLEZ; D.; SAMEOTO; C.; MENON

    2010-01-01

    In this paper we present a study into the cleaning properties of synthetic dry adhesives. We have manufactured the adhesive micro-fibres through a low-cost, high yield fabrication method using Sylgard 184 Polydimethylsiloxane (PDMS) as the structural material. We deliberately contaminated the adhesive samples with different sized particles in the micro and macro scales and tested different cleaning methods for their efficacy with respect to each particle size. We investigated different cleaning methods, which included the use of wax moulding, vibration and pressure sensitive adhesives. For adhesion testing we used a custom system with a linear stage and a force sensor indenting a hemispherical probe into the adhesive surface and measuring the pull-off force. To characterize the cleaning efficacy we visually inspected each sample in a microscope and weighed the samples with a microgram-accuracy analytical balance. Results showed that the moulding method induced adhesion recovery in a greater percentage than the other cleaning methods and even helped with the recovery of collapsed posts in some cases. On the other hand pressure sensitive adhesives seem to have the upper hand with regards to certain particle sizes that can potentially pose problems with the moulding method.

  11. Wind Generators

    Science.gov (United States)

    1989-01-01

    When Enerpro, Inc. president, Frank J. Bourbeau, attempted to file a patent on a system for synchronizing a wind generator to the electric utility grid, he discovered Marshall Space Flight Center's Frank Nola's power factor controller. Bourbeau advanced the technology and received a NASA license and a patent for his Auto Synchronous Controller (ASC). The ASC reduces generator "inrush current," which occurs when large generators are abruptly brought on line. It controls voltage so the generator is smoothly connected to the utility grid when it reaches its synchronous speed, protecting the components from inrush current damage. Generator efficiency is also increased in light winds by applying lower than rated voltage. Wind energy is utilized to drive turbines to generate electricity for utility companies.

  12. Spray drying technique. I: Hardware and process parameters.

    Science.gov (United States)

    Cal, Krzysztof; Sollohub, Krzysztof

    2010-02-01

    Spray drying is a transformation of feed from a fluid state into a dried particulate form by spraying the feed into a hot drying medium. The main aim of drying by this method in pharmaceutical technology is to obtain dry particles with desired properties. This review presents the hardware and process parameters that affect the properties of the dried product. The atomization devices, drying chambers, air-droplet contact systems, the collection of dried product, auxiliary devices, the conduct of the spray drying process, and the significance of the individual parameters in the drying process, as well as the obtained product, are described and discussed.

  13. Investigation of Solar Drying of Ginger (Zingiber officinale): Emprical Modelling, Drying Characteristics, and Quality Study

    OpenAIRE

    A. Waheed Deshmukh; Mahesh N. Varma; Chang Kyoo Yoo; Wasewar, Kailas L.

    2014-01-01

    Drying is a simultaneous heat and mass transfer energy intensive operation, widely used as a food preservation technique. In view of improper postharvest methods, energy constraint, and environmental impact of conventional drying methods, solar drying could be a practical, economical, and environmentally reliable alternative. In the present paper applicability of mixed mode solar cabinet dryer was investigated for drying of commercially important and export oriented ginger. Freshly harvested ...

  14. Rainfall generation

    Science.gov (United States)

    Sharma, Ashish; Mehrotra, Raj

    This chapter presents an overview of methods for stochastic generation of rainfall at annual to subdaily time scales, at single- to multiple-point locations, and in a changing climatic regime. Stochastic rainfall generators are used to provide inputs for risk assessment of natural or engineering systems that can undergo failure under sustained (high or low) extremes. As a result, generation of rainfall has evolved to provide options that adequately represent such conditions, leading to sequences that exhibit low-frequency variability of a nature similar to the observed rainfall. The chapter consists of three key sections: the first two outlining approaches for rainfall generation using endogenous predictor variables and the third highlighting approaches for generation using exogenous predictors often simulated to represent future climatic conditions. The first section presents approaches for generation of annual and seasonal rainfall and daily rainfall, both at single-point locations and multiple sites, with an emphasis on alternatives that ensure appropriate representation of low-frequency variability in the generated rainfall sequences. The second section highlights advancements in the subdaily rainfall generation procedures including commonly used approaches for daily to subdaily rainfall generation. The final section (generation using exogenous predictors) presents a range of alternatives for stochastic downscaling of rainfall for climate change impact assessments of natural and engineering systems. We conclude the chapter by outlining some of the key challenges that remain to be addressed, especially in generation under climate change conditions, with an emphasis on the importance of incorporating uncertainty present in both measurements and models, in the rainfall sequences that are generated.

  15. Characterization and aerosol dispersion performance of advanced spray-dried chemotherapeutic PEGylated phospholipid particles for dry powder inhalation delivery in lung cancer.

    Science.gov (United States)

    Meenach, Samantha A; Anderson, Kimberly W; Zach Hilt, J; McGarry, Ronald C; Mansour, Heidi M

    2013-07-16

    Pulmonary inhalation chemotherapeutic drug delivery offers many advantages for lung cancer patients in comparison to conventional systemic chemotherapy. Inhalable particles are advantageous in their ability to deliver drug deep in the lung by utilizing optimally sized particles and higher local drug dose delivery. In this work, spray-dried and co-spray dried inhalable lung surfactant-mimic PEGylated lipopolymers as microparticulate/nanoparticulate dry powders containing paclitaxel were rationally designed via organic solution advanced spray drying (no water) in closed-mode from dilute concentration feed solution. Dipalmitoylphosphatidylcholine (DPPC) and dipalmitoylphosphatidylethanolamine poly(ethylene glycol) (DPPE-PEG) with varying PEG chain length were mixed with varying amounts of paclitaxel in methanol to produce co-spray dried microparticles and nanoparticles. Scanning electron microscopy showed the spherical particle morphology of the inhalable particles. Thermal analysis and X-ray powder diffraction confirmed the retention of the phospholipid bilayer structure in the solid-state following spray drying, the degree of solid-state molecular order, and solid-state phase transition behavior. The residual water content of the particles was very low as quantified analytically Karl Fisher titration. The amount of paclitaxel loaded into the particles was quantified which indicated high encapsulation efficiencies (43-99%). Dry powder aerosol dispersion performance was measured in vitro using the Next Generation Impactor (NGI) coupled with the Handihaler dry powder inhaler device and showed mass median aerodynamic diameters in the range of 3.4-7 μm. These results demonstrate that this novel microparticulate/nanoparticulate chemotherapeutic PEGylated phospholipid dry powder inhalation aerosol platform has great potential in lung cancer drug delivery.

  16. University of Wisconsin Oshkosh Anaerobic Dry Digestion Facility

    Energy Technology Data Exchange (ETDEWEB)

    Koker, John [Univ. of Wisconsin, Oshkosh, WI (United States); Lizotte, Michael [Univ. of Wisconsin, Oshkosh, WI (United States)

    2017-02-08

    The University of Wisconsin Oshkosh Anaerobic Dry Digestion Facility is a demonstration project that supported the first commercial-scale use in the United States of high solids, static pile technology for anaerobic digestion of organic waste to generate biogas for use in generating electricity and heat. The research adds to the understanding of startup, operation and supply chain issues for anaerobic digester technology. Issues and performance were documented for equipment installation and modifications, feedstock availability and quality, weekly loading and unloading of digestion chambers, chemical composition of biogas produced, and energy production. This facility also demonstrated an urban industrial ecology approach to siting such facilities near sewage treatment plants (to capture and use excess biogas generated by the plants) and organic yard waste collection sites (a source of feedstock).

  17. Generation of aerosolized drugs.

    Science.gov (United States)

    Wolff, R K; Niven, R W

    1994-01-01

    The expanding use of inhalation therapy has placed demands on current aerosol generation systems that are difficult to meet with current inhalers. The desire to deliver novel drug entities such as proteins and peptides, as well as complex formulations including liposomes and microspheres, requires delivery systems of improved efficiency that will target the lung in a reproducible manner. These efforts have also been spurred by the phase out of chlorofluorocarbons (CFCs) and this has included a directed search for alternative propellants. Consequently, a variety of new aerosol devices and methods of generating aerosols are being studied. This includes the use of freon replacement propellants, dry powder generation systems, aqueous unit spray systems and microprocessor controlled technologies. Each approach has advantages and disadvantages depending upon each principle of action and set of design variables. In addition, specific drugs may be better suited for one type of inhaler device vs. another. The extent to which aerosol generation systems achieve their goals is discussed together with a summary of selected papers presented at the recent International Congress of Aerosols in Medicine.

  18. Cold vacuum drying facility 90% design review

    Energy Technology Data Exchange (ETDEWEB)

    O`Neill, C.T.

    1997-05-02

    This document contains review comment records for the CVDF 90% design review. Spent fuels retrieved from the K Basins will be dried at the CVDF. It has also been recommended that the Multi-Conister Overpacks be welded, inspected, and repaired at the CVD Facility before transport to dry storage.

  19. Control of fluidized bed tea drying

    NARCIS (Netherlands)

    Temple, S.J.

    2000-01-01

    Tea is a product made from the leaf of the tea bush by several processes, including drying. The drying stage is the most energy intensive, and has tight performance criteria. This project investigated the options for the control of a fluidized bed tea dryer. The work included establishing some of th

  20. Reflectance characteristics of dry plant materials

    Science.gov (United States)

    Elvidge, Christopher D.

    1987-01-01

    Chlorophyll and water obscure the absorption features of all other leaf constituents in the spectra of green leaves. The predominant near-IR and thermal IR spectral features of dry plant materials originate from lignin, cellulose, and hemicellulose. These compounds account for 80 to 98 percent of the dry weight in most plant materials.

  1. 7 CFR 58.220 - Drying systems.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Drying systems. 58.220 Section 58.220 Agriculture....220 Drying systems. (a) Spray dryers. Spray dryers shall be of a continuous discharge type and all... filter system shall comply with the applicable requirements of the 3-A Accepted Practices for Milk and...

  2. 27 CFR 24.202 - Dried fruit.

    Science.gov (United States)

    2010-04-01

    ... reduce the density to 22 degrees Brix. If the dried fruit liquid after restoration is found to be... degrees Brix. After addition of water to the dried fruit, the resulting liquid may be ameliorated with... Brix. (26 U.S.C. 5387)...

  3. Application of Dry Air Drying Techniques on West-East Gas Pipeline Project

    Institute of Scientific and Technical Information of China (English)

    GaoJianguo; XieLigong; DaiZongyu

    2004-01-01

    Based on the pre-eommissioning requirements of gas pipeline, the basic principles and influential factors of dry air drying adopted in long distance gas pipelines, and states in detail the technological flow and the equipment required, etc. are introduced, which will have practical significance in drying operation on gas pipeline.

  4. Desorption isotherms, drying characteristics and qualities of glace tropical fruits undergoing forced convection solar drying

    Energy Technology Data Exchange (ETDEWEB)

    Jamradloedluk, Jindaporn; Wiriyaumpaiwong, Songchai [Mahasarakham Univ. Khamriang, Kantarawichai, Mahasarakham (Thailand)

    2008-07-01

    Solar energy, a form of sustainable energy, has a great potential for a wide variety of applications because it is abundant and accessible, especially for countries located in the tropical region. Drying process is one of the prominent techniques for utilization of solar energy. This research work proposes a forced convection solar drying of osmotically pretreated fruits viz. mango, guava, and pineapple. The fruit cubes with a dimension of 1cm x 1cm x 1cm were immersed in 35% w./w. sucrose solution prior to the drying process. Drying kinetics, color and hardness of the final products obtained from solar drying were investigated and compared with those obtained from open air-sun drying. Desorption isotherms of the osmosed fruits were also examined and five mathematical models were used to fit the desorption curves. Experimental results revealed that solar drying provided higher drying rate than natural sun drying. Color of glace fruit processed by solar drying was more intense, indicated by lower value of lightness and higher value of yellowness, than that processed by sun drying. Hardness of the products dehydrated by both drying methods, however, was not significantly different (p>0.05). Validation of the mathematical models developed showed that the GAB model was most effective for describing desorption isotherms of osmotically pretreated mango and pineapple whereas Peleg's model was most effective for describing desorption isotherms of osmotically pretreated guava. (orig.)

  5. Optimization of a solar-assisted drying system for drying bananas

    Energy Technology Data Exchange (ETDEWEB)

    Smitabhindu, R. [Department of Industrial Engineering, Kasetsart University, Bangkok 10900 (Thailand); Janjai, S. [Department of Physics, Faculty of Science, Silpakorn University, Nakhon Pathom 73000 (Thailand); Chankong, V. [Department of Electrical Engineering and Computer Science, Case Western Reserve University, Cleveland, OH (United States)

    2008-07-15

    This paper presents a mathematical model for optimal design of a solar-assisted drying system for drying bananas. The optimization model consists of a simulation model of a solar-assisted drying system combined with an economic model. The simulation model is composed of two systems of differential equations: one for the collector and other for the drying cabinet. These systems of the differential equation were solved using the finite difference method. Values of the model parameters were determined experimentally. A computer program in FORTRAN was developed to simulate the performance of the drying system. The model was validated by comparing the simulation results with the experimental results and they were in good agreement. This simulation model was used for the optimization of the solar-assisted drying system. An economic model was formulated to calculate the annual drying cost. The optimization problem was defined as the optimization of the geometry and operational parameters of the drying system so as to minimize the drying cost per unit of dried product. Currently used collector area and the air recycle factor were considered as the parameters for basic mode of operation of the drying system. The adaptive pattern search technique was adopted to find the optimum values of the solar collector area and the recycle factor. The optimum values of the collector area and the recycle factor were found to be 26 m{sup 2} and 90%, respectively. The computer program developed in this study can be used to optimize similar drying systems. (author)

  6. Drying kinetics and quality aspects during heat pump drying of onion (Allium cepa L.

    Directory of Open Access Journals (Sweden)

    Nihar Ranjan Sahoo

    2012-10-01

    Full Text Available Normal 0 false false false MicrosoftInternetExplorer4 A prototype heat pump dryer has been developed for drying of fruits and vegetables at low temperature and relative humidity to maintain the quality of dried product. Onions, of Nasik red variety were peeled, trimmed and sliced to 2 mm thickness. The onion slices were dried in the heat pump dryer at 35ºC (32 % R.H., 40ºC (26 % R.H., 45ºC (19 % R.H. and 50ºC (15 % R.H.. Samples were also dried in a hot air dryer at 50ºC (52 % R.H. for comparison. The drying rate increased with increase in drying air temperature, associated with reduced R.H., in the heat pump dryer. Drying took place mainly under the falling rate period. The Page equation, resulting in a higher coefficient of determination and lower root mean square error, better described the thin-layer drying of onion slices than the Henderson and Pabis equation. Heat pump drying took less drying time of 360 min and yielded better quality dried product, with higher retention of ascorbic acid and pyruvic acid and lower colour change, as compared to a hot air dryer at the same drying air temperature of 50ºC.

  7. On the Current and Future Dry Spell Characteristics over Africa

    Directory of Open Access Journals (Sweden)

    Bessam Bouagila

    2013-09-01

    Full Text Available Changes in precipitation frequency and intensity distribution over Africa will have a direct impact on dry spells and, therefore, will affect various climate sensitive sectors. In this study, the ability of the fifth generation of the Canadian Regional Climate Model (CRCM5 in simulating annual and seasonal dry spell characteristics is assessed for four precipitation thresholds (0.5 mm, 1 mm, 2 mm and 3 mm over Africa. The dry spell characteristics considered are the number of dry days, number of dry spells and five-year return levels of maximum dry spell durations. The performance errors are assessed by comparing ERA-Interim driven CRCM5 with the Global Precipitation Climatology Project (GPCP dataset, for the common 1997–2008 period. Lateral boundary forcing errors, i.e., errors in the CRCM5 simulation created by errors in the driving Canadian Earth System model (CanESM2 data—as well as the added value—of CRCM5 over CanESM2 are also assessed for the current climate. This is followed by an assessment of projected changes to dry spell characteristics for two future climates (2041–2070 and 2071–2100 simulated by both CRCM5 driven by CanESM2 and CanESM2 itself, for Representative Concentration Pathway (RCP 4.5. Results suggest that CRCM5 driven by ERA-Interim has a tendency to overestimate the annual mean number of dry days and the five-year return level of the maximum dry spell duration in a majority of the regions while it slightly underestimates the number of dry spells. In general, the CRCM5 performance errors associated with the annual and seasonal dry spell characteristics are found to be larger in magnitude compared to the lateral boundary forcing errors. Projected changes to the dry spell characteristics for the 2041–2070 and 2071–2100 periods, with respect to the 1981–2010 period suggests significant changes in the tropics, with the mean number of dry days and the five-year return levels of maximum dry spell duration

  8. Implementing Strategies for Drying and Pressing Wood Without Emissions Controls

    Energy Technology Data Exchange (ETDEWEB)

    Sujit Banerjee; Terrance Conners

    2007-09-07

    Drying and pressing wood for the manufacture of lumber, particleboard, oriented strand board (OSB), veneer and medium density fiberboard (MDF) release volatile organic compounds (VOCs) into the atmosphere. These emissions require control equipment that are capital-intensive and consume significant quantities of natural gas and electricity. The objective of our work was to understand the mechanisms through which volatile organic compounds are generated and released and to develop simple control strategies. Of the several strategies developed, two have been implemented for OSB manufacture over the course of this study. First, it was found that increasing final wood moisture by about 2-4 percentage points reduced the dryer emissions of hazardous air pollutants by over 70%. As wood dries, the escaping water evaporatively cools the wood. This cooling tapers off wood when the wood is nearly dry and the wood temperature rises. Thermal breakdown of the wood tissue occurs and VOCs are released. Raising the final wood moisture by only a few percentage points minimizes the temperature rise and reduces emissions. Evaporative cooling also impacts has implications for VOC release from wood fines. Flaking wood for OSB manufacture inevitable generates fines. Fines dry out rapidly because of their high surface area and evaporative cooling is lost more rapidly than for flakes. As a result, fines emit a disproportionate quantity of VOCs. Fines can be reduced in two ways: through screening of the green furnish and through reducing their generation during flaking. The second approach is preferable because it also increased wood yield. A procedure to do this by matching the sharpness angle of the flaker knife to the ambient temperature was also developed. Other findings of practical interests are as follows: Dielectric heating of wood under low-headspace conditions removes terpenes and other extractives from softwood; The monoterpene content in trees depend upon temperature and seasonal

  9. Mathematical modelling of cucumber (cucumis sativus) drying

    Science.gov (United States)

    Shahari, N.; Hussein, S. M.; Nursabrina, M.; Hibberd, S.

    2014-07-01

    This paper investigates the applicability of using an experiment based mathematical model (empirical model) and a single phase mathematical model with shrinkage to describe the drying curve of cucumis sativus (cucumber). Drying experiments were conducted using conventional air drying and data obtained from these experiments were fitted to seven empirical models using non-linear least square regression based on the Levenberg Marquardt algorithm. The empirical models were compared according to their root mean square error (RMSE), sum of square error (SSE) and coefficient of determination (R2). A logarithmic model was found to be the best empirical model to describe the drying curve of cucumber. The numerical result of a single phase mathematical model with shrinkage was also compared with experiment data for cucumber drying. A good agreement was obtained between the model predictions and the experimental data.

  10. Progress in developments of dry coal beneficiation

    Institute of Scientific and Technical Information of China (English)

    Yuemin Zhao; Xuliang Yang; Zhenfu Luo; Chenlong Duan; Shulei Song

    2014-01-01

    China’s energy supply heavily relies on coal and China’s coal resource and water resource has a reverse distribution. The problem of water shortages restricts the applications of wet coal beneficiation technologies in drought regions. The present situation highlights the significance and urgency of developing dry beneficiation technologies of coal. Besides, other countries that produce large amounts of coal also encounter serious problem of lack of water for coal beneficiation, such as American, Australia, Canada, South Africa, Turkey and India. Thus, dry coal beneficiation becomes the research hot-points in the field of coal cleaning worldwide in recent years. This paper systematically reviewed the promising research efforts on dry coal beneficiation reported in literature in last 5 years and discussed the progress in developments of dry coal beneficiation worldwide. Finally, we also elaborated the prospects and the challenges of the development of dry coal beneficiation.

  11. Inspection of Used Fuel Dry Storage Casks

    Energy Technology Data Exchange (ETDEWEB)

    Dennis C. Kunerth; Tim McJunkin; Mark McKay; Sasan Bakhtiari

    2012-09-01

    ABSTRACT The U.S. Nuclear Regulatory Commission (NRC) regulates the storage of used nuclear fuel, which is now and will be increasingly placed in dry storage systems. Since a final disposition pathway is not defined, the fuel is expected to be maintained in dry storage well beyond the time frame originally intended. Due to knowledge gaps regarding the viability of current dry storage systems for long term use, efforts are underway to acquire the technical knowledge and tools required to understand the issues and verify the integrity of the dry storage system components. This report summarizes the initial efforts performed by researchers at Idaho National Laboratory and Argonne National Laboratory to identify and evaluate approaches to in-situ inspection dry storage casks. This task is complicated by the design of the current storage systems that severely restrict access to the casks.

  12. Spray drying formulation of amorphous solid dispersions.

    Science.gov (United States)

    Singh, Abhishek; Van den Mooter, Guy

    2016-05-01

    Spray drying is a well-established manufacturing technique which can be used to formulate amorphous solid dispersions (ASDs) which is an effective strategy to deliver poorly water soluble drugs (PWSDs). However, the inherently complex nature of the spray drying process coupled with specific characteristics of ASDs makes it an interesting area to explore. Numerous diverse factors interact in an inter-dependent manner to determine the final product properties. This review discusses the basic background of ASDs, various formulation and process variables influencing the critical quality attributes (CQAs) of the ASDs and aspects of downstream processing. Also various aspects of spray drying such as instrumentation, thermodynamics, drying kinetics, particle formation process and scale-up challenges are included. Recent advances in the spray-based drying techniques are mentioned along with some future avenues where major research thrust is needed.

  13. Mathematical Model for the Continuous Vacuum Drying

    Institute of Scientific and Technical Information of China (English)

    DAI Hui-liang

    2002-01-01

    An improved mathematical model for the continuous vacuum drying of highly viscous and heatsensitive foodstuffs was proposed, The process of continuous vacuum drying was presented as a moving boundary problem of moisture evaporation in cylindrical coordinates. Boundary condition of the first kind for the known functional dependence of the drying body surface temperature on time was considered. Finally, the appropriate system of differential equations was solved numerically and the values of drying rate, integral moisture content of the material, moving boundary position as well as temperature in any point of the material and at any moment time were obtained. This procedure was applied to continuous vacuum drying of foods such as natural cheese and fresh meat paste.

  14. EUV extendibility via dry development rinse process

    Science.gov (United States)

    Sayan, Safak; Zheng, Tao; De Simone, Danilo; Vandenberghe, Geert

    2016-03-01

    Conventional photoresist processing involves resist coating, exposure, post-exposure bake, development, rinse and spin drying of a wafer. DDRP mitigates pattern collapse by applying a special polymer material (DDRM) which replaces the exposed/developed part of the photoresist material before wafer is spin dried. As noted above, the main mechanism of pattern collapse is the capillary forces governed by surface tension of rinse water and its asymmetrical recession from both sides of the lines during the drying step of the develop process. DDRP essentially eliminates these failure mechanisms by replacing remaining rinse water with DDRM and providing a structural framework that support resist lines from both sides during spin dry process. Dry development rinse process (DDRP) eliminates the root causes responsible for pattern collapse of photoresist line structures. Since these collapse mechanisms are mitigated, without the need for changes in the photoresist itself, achievable resolution of the state-of-the-art EUV photoresists can further be improved.

  15. Semi-Dried Fruits and Vegetables

    Directory of Open Access Journals (Sweden)

    Gamze Uysal Seçkin

    2015-12-01

    Full Text Available Since ancient times, the preservation of fruit and vegetables is an ancient method of drying. Sun drying method has been used more widely. In general, consumer-ready products are dried fruits, while the dried vegetables are the foods subjected to the rehydration processes such as boiling, heating and baking before consumption. In recent years, new products with high eating quality have been attempted to achieve without losing characteristic of raw material. With the improving of food technology, using developed methods (pH reduction with reducing aw, slight heating, preservatives use etc. as protective agent, and using a combination of a low rate as an alternative to traditional food preservation process, products have been obtained without changing original characteristics of food. ‘Semi-dried 'or 'medium moist 'products with little difference between the taste and texture of the product with a damp have gained importance in recent years in terms of consumer preferences. Vegetables or fruits, which have water activity levels between 0.50 and 0.95 and the moisture content of between 26% and 60%, are called 'medium moist fruit or vegetables'. Two different manufacturing process to obtain a semi-dried or intermediate moisture products are applied. First, fully dried fruits and vegetables to be rehydrated with water are brought to the desired level of their moisture content. Second, in the first drying process, when the product moisture content is reduced to the desired level, the drying process is finished. The semi-dried products are preferred by consumers because they have a softer texture in terms of eating quality and like fresh products texture.

  16. Hot Dry Rock; Geothermal Energy

    Energy Technology Data Exchange (ETDEWEB)

    None

    1990-01-01

    The commercial utilization of geothermal energy forms the basis of the largest renewable energy industry in the world. More than 5000 Mw of electrical power are currently in production from approximately 210 plants and 10 000 Mw thermal are used in direct use processes. The majority of these systems are located in the well defined geothermal generally associated with crustal plate boundaries or hot spots. The essential requirements of high subsurface temperature with huge volumes of exploitable fluids, coupled to environmental and market factors, limit the choice of suitable sites significantly. The Hot Dry Rock (HDR) concept at any depth originally offered a dream of unlimited expansion for the geothermal industry by relaxing the location constraints by drilling deep enough to reach adequate temperatures. Now, after 20 years intensive work by international teams and expenditures of more than $250 million, it is vital to review the position of HDR in relation to the established geothermal industry. The HDR resource is merely a body of rock at elevated temperatures with insufficient fluids in place to enable the heat to be extracted without the need for injection wells. All of the major field experiments in HDR have shown that the natural fracture systems form the heat transfer surfaces and that it is these fractures that must be for geothermal systems producing from naturally fractured formations provide a basis for directing the forthcoming but, equally, they require accepting significant location constraints on HDR for the time being. This paper presents a model HDR system designed for commercial operations in the UK and uses production data from hydrothermal systems in Japan and the USA to demonstrate the reservoir performance requirements for viable operations. It is shown that these characteristics are not likely to be achieved in host rocks without stimulation processes. However, the long term goal of artificial geothermal systems developed by systematic

  17. Generative Semantics

    Science.gov (United States)

    Bagha, Karim Nazari

    2011-01-01

    Generative semantics is (or perhaps was) a research program within linguistics, initiated by the work of George Lakoff, John R. Ross, Paul Postal and later McCawley. The approach developed out of transformational generative grammar in the mid 1960s, but stood largely in opposition to work by Noam Chomsky and his students. The nature and genesis of…

  18. DRYING OF EMPTY FRUIT BUNCHES AS WASTED BIOMASS BY HYBRID SOLAR–THERMAL DRYING TECHNIQUE

    Directory of Open Access Journals (Sweden)

    H. H. Al-Kayiem

    2013-12-01

    Full Text Available Solar drying of EFB is highly feasible and economic, but the solar drying process is interrupted during cloudy or rainy days and also at night. In the present paper, a combined solar, as the main heat input, and biomass burner, as an auxiliary source of thermal energy, has been investigated experimentally to dry EFB. An experimental model consisting of a solar dryer integrated with a thermal backup unit was designed and fabricated. A series of experimental measurements were carried out in four different drying modes, namely, open sun, mixed direct and indirect solar, thermal backup, and hybrid. The results from the four modes used to dry 2.5 kg of EFB were summarized and compared. The results indicated that the solar drying mode required around 52 to 80 hours to dry the EFB, while the open sun drying mode required 100 hours. Usage of the thermal backup as heat source reduced the drying time to 48–56 hours. With the hybrid mode, the drying time was considerably reduced to 24–32 hours. The results demonstrate that the combined solar and thermal backup effectively enhanced the drying performance. The application of a solar dryer with a biomass burner is practical for massive production of solid fuels from EFB.

  19. Comparative profitability of onions harvested as green and dry (mature in Botswana

    Directory of Open Access Journals (Sweden)

    S.P. Baliyan

    2013-06-01

    Full Text Available This study was an attempt to calculate and compare the profitability of onions harvested as green and dry (mature in Botswana. Half of the planted onions were harvested and sold as green and half were harvested and sold as dry onions. The cost of production of green onions was 32.78% higher than the cost of production of dry onions. The irrigation and marketing expenses contributed the highest difference in the cost of production of green and dry onions. The major cost item contributing to the cost of green onions production was marketing cost (32.86% followed by irrigation cost (23.77% and harvesting cost (18.53% whereas the highest cost of production for dry onions was contributed by irrigation (38.58% followed by marketing (19.45% and planting (11.96%. The marketing cost for green onions was almost double (35.6% as compare to the dry onions (18.2%. The total return from green onions was 50.90% higher than the returns from dry onions. Gross margin of onions harvested as green was 63% higher than the gross margin from dry onions, which indicated that the production of green onions is more profitable as compare to production of dry onions. The farmers preferred onion harvested as green because it generates regular and higher returns than onions harvested as mature. Government should support farmers through some policies such as Minimum Support Price (MSP for dry onions, distribution of Mini Ferti–Seed Kit (Seeds of improved varieties and fertilizer package, construction of storages and formation of cooperatives.

  20. Development of dry storage technology of spent nuclear fuel

    Energy Technology Data Exchange (ETDEWEB)

    Maruoka, Kunio [Mitsubishi Heavy Industries Ltd., Yokohama (Japan). Nuclear Energy Systems Engineering Center; Murakami, Kazuo; Yokoyama, Takeshi; Natsume, Tomohiro; Irino, Mitsuhiro

    1998-07-01

    The increasing demand for storage of spent fuel assemblies generated by commercial nuclear power plants is the urgent subject to solve. The dry storage system is as economically more advantageous than the pool storage system, and so, Mitsubishi Heavy Industries, Ltd. has developed the metal storage cask suited to small and medium storage capacity under 2000MTU - 3000MTU. For large scale capacity, the new `Mitsubishi Vault Storage System` has been developed, and it provides a safe and economical solution. Technical study concerning cooling ability was performed. (author)

  1. Drying radioactive wastewater salts using a thin film dryer

    Energy Technology Data Exchange (ETDEWEB)

    Scully, D.E.

    1998-03-19

    This paper describes the operational experience in drying brines generated at a radioactive wastewater treatment facility. The brines are composed of aqueous ammonium sulfate/sodium sulfate and aqueous sodium nitrate/sodium sulfate, The brine feeds receive pretreatment to preclude dryer bridging and fouling. The dryer products are a distillate and a powder. The dryer is a vertical thin film type consisting of a steam heated cylinder with rotor. Maintenance on the dryer has been minimal. Although many operability problems have had to be overcome, dryer performance can now be said to be highly reliable.

  2. Cryopreservation of spin-dried mammalian cells.

    Directory of Open Access Journals (Sweden)

    Nilay Chakraborty

    Full Text Available This study reports an alternative approach to achieve vitrification where cells are pre-desiccated prior to cooling to cryogenic temperatures for storage. Chinese Hamster Ovary (CHO cells suspended in a trehalose solution were rapidly and uniformly desiccated to a low moisture content (<0.12 g of water per g of dry weight using a spin-drying technique. Trehalose was also introduced into the cells using a high-capacity trehalose transporter (TRET1. Fourier Transform Infrared Spectroscopy (FTIR was used to examine the uniformity of water concentration distribution in the spin-dried samples. 62% of the cells were shown to survive spin-drying in the presence of trehalose following immediate rehydration. The spin-dried samples were stored in liquid nitrogen (LN(2 at a vitrified state. It was shown that following re-warming to room temperature and re-hydration with a fully complemented cell culture medium, 51% of the spin-dried and vitrified cells survived and demonstrated normal growth characteristics. Spin-drying is a novel strategy that can be used to improve cryopreservation outcome by promoting rapid vitrification.

  3. XANES analysis of dried and calcined bones

    Energy Technology Data Exchange (ETDEWEB)

    Rajendran, Jayapradhi [Materials Science and Engineering Department, University of Texas at Arlington (United States); Gialanella, Stefano [Materials Science and Industrial Technology Department, University of Trento (Italy); Aswath, Pranesh B., E-mail: aswath@uta.edu [Materials Science and Engineering Department, University of Texas at Arlington (United States)

    2013-10-15

    The structure of dried and calcined bones from chicken, bovine, deer, pig, sheep and chamois was examined using X-ray Absorption Near Edge Structure (XANES) spectroscopy. The oxygen K-edge absorption edge indicates that the surface of dried bone has a larger proportion of carbonate than the interior that is made up of phosphates. The phosphorus L and K edge clearly indicate that pyrophosphates, α-tricalcium phosphate (α-TCP) and hydrogen phosphates of Ca do not exist in either the dried bone or calcined bone and phosphorus exists as either β-tricalcium phosphate (β-TCP) or hydroxyapatite, both in the dried and calcined conditions. The Ca K-edge analysis indicates that β-TCP is the likely form of phosphate in both the dried and calcined conditions. - Highlights: • For the first time bones of five different species of vertebrates have been compared in both the dried and calcined states. • O, P and Ca edges detail the local coordination of these atoms in dried and calcined bone. • O K-edge shows that the surface of bone has more CO{sub 3} while the interior has more PO{sub 4}. • P and Ca edges eliminate the presence of pyrophosphates and confirmed the presence of HA and β-TCP. • The stability of these phosphates on calcination has been examined using XANES.

  4. Physical properties of sunflower grains after drying

    Directory of Open Access Journals (Sweden)

    Paulo Carteri Coradi

    2015-12-01

    Full Text Available The knowledge of the physical properties of the grains is important for the optimization of post-harvest operations. This study aimed to evaluate the effects of convective drying with different air temperatures (45, 55, 65 and 75 °C the physical properties of sunflower seeds. The drying sunflower grains was performed in convection oven with forced air. In natural conditions, samples of 5 kg of pellets were used for each repetition drying. During the drying process, the grains samples were weighed periodically until they reach 10% (wet basis, w.b., then were subjected to evaluations of physical properties. According to the results it was observed that the porosity, apparent density, thousand kernel weight to the drag coefficient, roundness, sphericity and width of sunflower seed did not change with increasing temperature drying air. It was concluded that the drying air temperatures of 45 °C and 55 retained the initial physical characteristics of sunflower seeds. The temperature of the drying air of 75 °C had greater influence on changes in volumetric shrinkage of the grains.

  5. Survival of bifidobacteria after spray-drying.

    Science.gov (United States)

    Lian, Wen-Chian; Hsiao, Hung-Chi; Chou, Cheng-Chun

    2002-03-25

    To investigate the survival of bifidobacteria after spray-drying, Bifidobacterium infantis CCRC 14633, B. infantis CCRC 14661, B. longum ATCC 15708, B. longum CCRC 14634 and B. longum B6 were first spray-dried with different carrier media including 10% (w/w) gelatin, gum arabic and soluble starch. B. infantis CCRC 14633 and B. longum were also determined in skim milk. It was found that survival of bifidobacteria after spray-drying varied with strains and is highly dependent on the carriers used. Among the test organisms, B. longum B6 exhibited the least sensitivity to spray-drying and showed the highest survival of ca. 82.6% after drying with skim milk. Comparisons of the effect of carrier concentrations revealed that spray-drying at 10% (w/w) gelatin, gum arabic or soluble starch resulted in the highest survival of bifidobacteria. In addition, among the various outlet-air temperatures tested, bifidobacteria showed the highest survival after drying at 50 degrees C. Elevation of outlet-air temperature caused increased inactivation of bifidobacteria. However, the inactivation caused by increased outlet-air temperature varied with the carrier used, with the greatest reduction observed using soluble starch and the least with skim milk.

  6. Machine Learning Assessments of Soil Drying

    Science.gov (United States)

    Coopersmith, E. J.; Minsker, B. S.; Wenzel, C.; Gilmore, B. J.

    2011-12-01

    Agricultural activities require the use of heavy equipment and vehicles on unpaved farmlands. When soil conditions are wet, equipment can cause substantial damage, leaving deep ruts. In extreme cases, implements can sink and become mired, causing considerable delays and expense to extricate the equipment. Farm managers, who are often located remotely, cannot assess sites before allocating equipment, causing considerable difficulty in reliably assessing conditions of countless sites with any reliability and frequency. For example, farmers often trace serpentine paths of over one hundred miles each day to assess the overall status of various tracts of land spanning thirty, forty, or fifty miles in each direction. One means of assessing the moisture content of a field lies in the strategic positioning of remotely-monitored in situ sensors. Unfortunately, land owners are often reluctant to place sensors across their properties due to the significant monetary cost and complexity. This work aspires to overcome these limitations by modeling the process of wetting and drying statistically - remotely assessing field readiness using only information that is publically accessible. Such data includes Nexrad radar and state climate network sensors, as well as Twitter-based reports of field conditions for validation. Three algorithms, classification trees, k-nearest-neighbors, and boosted perceptrons are deployed to deliver statistical field readiness assessments of an agricultural site located in Urbana, IL. Two of the three algorithms performed with 92-94% accuracy, with the majority of misclassifications falling within the calculated margins of error. This demonstrates the feasibility of using a machine learning framework with only public data, knowledge of system memory from previous conditions, and statistical tools to assess "readiness" without the need for real-time, on-site physical observation. Future efforts will produce a workflow assimilating Nexrad, climate network

  7. Report Generator

    OpenAIRE

    2016-01-01

    Download data from HP Quality Center using of OTA Client. Implementation must be scalable to all projects under test. That is, it will be possible to generate automatically test reports at least for 2010, Modulaser and Gen2 (FW or SW). Report Generator is a software implemented in VBA that allows get data from HP Quality Center for export it (either tables, charts or text) to a document in Word format. Report Generator es un Software implementado en VBA que permite extraer datos de HP Q...

  8. Cooling and drying in northeast Africa across the Pliocene

    Science.gov (United States)

    Liddy, Hannah M.; Feakins, Sarah J.; Tierney, Jessica E.

    2016-09-01

    Terrestrial records suggest that Northeast Africa experienced drying during the Pliocene; however, these records are often incomplete in time and space, and questions about this shift in climate remain. Here, we use marine sediments from Deep Sea Drilling Project (DSDP) Site 231 in the Gulf of Aden to generate a multi-proxy organic geochemical record of northeast African climate spanning 5.3-2 Ma. This new record provides a regional perspective on climate and serves as context for the fossil record of early hominin evolution. We measured leaf wax carbon (δ13Cwax) and hydrogen (δDwax) isotopic composition and TEX86 (tetraether index of 86 carbons) to investigate past changes in vegetation, aridity, and ocean temperature, respectively. In the earliest Pliocene, we infer warm subsurface ocean temperatures from TEX86, semi-arid conditions on land and extensive C4 grasslands based on δDwax, δ13Cwax and previously published pollen. After 5 Ma, ocean temperatures gradually cooled, and at 4.3 Ma there was a transition to arid conditions on land based on δDwax and pollen. Grasslands yielded to a mid Pliocene landscape of dry shrublands. This drying appears to be an atmospheric response to cooling ocean temperatures, which may reflect changes in tropical ocean circulation, the intensification of Indian Monsoon winds or perhaps other changes associated with Pliocene cooling.

  9. Hot Air Drying of Green Table Olives

    Directory of Open Access Journals (Sweden)

    Sayit Sargin

    2005-01-01

    Full Text Available The characteristics of hot air-drying of green table olives (Domat variety by using a tray dryer were studied. Air temperature varied from 40 to 70 °C with an air velocity of 1 m/s. Drying rate curves were determined and quality of dried green olives was evaluated by instrumental analysis (bulk density, particle density, porosity, shrinkage, moisture content, water activity, colour value, protein content, oil content, peroxide value and acidity. Consumers’ acceptance test and microbiological analysis were also applied.

  10. 7 CFR 58.250 - Dry whole milk.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Dry whole milk. 58.250 Section 58.250 Agriculture... Products Bearing Usda Official Identification § 58.250 Dry whole milk. Dry whole milk in commercial bulk... Grades of Dry Whole Milk. Quality requirements for dry whole milk in consumer packages shall be for U.S...

  11. 46 CFR 154.1150 - Distribution of dry chemical.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Distribution of dry chemical. 154.1150 Section 154.1150... Firefighting System: Dry Chemical § 154.1150 Distribution of dry chemical. (a) All locations on the above deck... chemical hand hose lines; or (2) At least one dry chemical hand hose line and one dry chemical monitor....

  12. Mechanisms of deterioration of nutrients. [of freeze dried foods

    Science.gov (United States)

    Karel, M.; Flink, J. M.

    1976-01-01

    Methods which produce freeze dried foods of improved quality were examined with emphasis on storage stability. Specific topics discussed include: microstructure of freeze dried systems, investigation of structural changes in freeze dried systems, artificial food matrices, osmotic preconcentration to yield improved quality freeze dried fruits, and storage stability of osmotically preconcentrated freeze dried fruits.

  13. OVERVIEW OF CRITERIA FOR INTERIM WET & DRY STORAGE OF RESEARCH REACTOR SPENT NUCLEAR FUEL

    Energy Technology Data Exchange (ETDEWEB)

    Sindelar, R.; Vinson, D.; Iyer, N.; Fisher, D.

    2010-11-03

    Following discharge from research reactors, spent nuclear fuel may be stored 'wet' in water pools or basins, or it may be stored 'dry' in various configurations including non-sealed or sealed containers until retrieved for ultimate disposition. Interim safe storage practices are based on avoiding degradation to the fuel that would impact functions related to safety. Recommended practices including environmental controls with technical bases, are outlined for wet storage and dry storage of aluminum-clad, aluminum-based research reactor fuel. For wet storage, water quality must be maintained to minimize corrosion degradation of aluminum fuel. For dry storage, vented canister storage of aluminum fuel readily provides a safe storage configuration. For sealed dry storage, drying must be performed so as to minimize water that would cause additional corrosion and hydrogen generation. Consideration must also be given to the potential for radiolytically-generated hydrogen from the bound water in the attendant oxyhydroxides on aluminum fuel from reactor operation for dry storage systems.

  14. Evaluation of solar sludge drying alternatives by costs and area requirements.

    Science.gov (United States)

    Kurt, Mayıs; Aksoy, Ayşegül; Sanin, F Dilek

    2015-10-01

    Thermal drying is a common method to reach above 90% dry solids content (DS) in sludge. However, thermal drying requires high amount of energy and can be expensive. A greenhouse solar dryer (GSD) can be a cost-effective substitute if the drying performance, which is typically 70% DS, can be increased by additional heat. In this study feasibility of GSD supported with solar panels is evaluated as an alternative to thermal dryers to reach 90% DS. Evaluations are based on capital and O&M costs as well as area requirements for 37 wastewater treatment plants (WWTPs) with various sludge production rates. Costs for the supported GSD system are compared to that of conventional and co-generation thermal dryers. To calculate the optimal costs associated with the drying system, an optimization model was developed in which area limitation was a constraint. Results showed that total cost was minimum when the DS in the GSD (DS(m,i)) was equal to the maximum attainable value (70% DS). On average, 58% of the total cost and 38% of total required area were associated with the GSD. Variations in costs for 37 WWTPs were due to differences in initial DS (DS(i,i)) and sludge production rates, indicating the importance of dewatering to lower drying costs. For large plants, GSD supported with solar panels provided savings in total costs especially in long term when compared to conventional and co-generation thermal dryers.

  15. Drying Characteristics and Product Quality of Lemon Slices Dried with Hot Air Circulation Oven and Hybrid Heatpump Dryers

    Directory of Open Access Journals (Sweden)

    Yong Hong Lee

    2014-12-01

    Full Text Available In this research, drying characteristics and product quality of Coulomb-force-assisted heatpump and oven dried lemon slices were studied. Lemon slices with 3 mm thickness each, were dried using oven and Coulomb-force-assisted-heatpump dryer with and without auxiliary heater at different drying conditions. It was found that the drying rate of the lemon slices dried by all drying methods showed only falling rate states, which indicates the drying kinetics were controlled by internal moisture diffusion. Oven drying of lemon slices at 60°C showed the highest drying rate among all, followed by oven dried slices at 50°C, Coulomb-force-heater-assisted-heatpump (CF-HT-HP dried slices at 31°C, Coulomb-force-assisted-heatpump (CF-HP dried slices at 22°C, oven dried slices at 40°C and heatpump dried slices at 22°C. The average effective moisture diffusivity value for the slices dried with these drying methods was found in the range of 16.2 to 63.8´10-4 mm2min-1. In terms of quality assessment, CF-HP dried lemon slices retained the highest amount of Vitamin C as compared to the lemon slices dried by other drying methods. However, it retained relatively lower amount of total phenolic content (TPC as compared to oven dried products. Among of all, CF-HP drying method produced dried lemon slices with the highest Vitamin C (6.74 mg AA / g dry weight whereas oven dried lemon slices at 50°C preserved most of the TPC in the dried slices, which recorded as 13.76 mg GA / g dry weight.

  16. Retronasal odor of dried bonito stock induces umami taste and improves the palatability of saltiness.

    Science.gov (United States)

    Manabe, Mariko; Ishizaki, Sanae; Yamagishi, Umi; Yoshioka, Tatsuhito; Oginome, Nozomu

    2014-09-01

    A traditional Japanese umami-rich stock, dried bonito stock, was reported to improve the palatability of a low-salt diet due to its characteristic aroma. Two pathways are available for the presentation of odors: the orthonasal and retronasal pathways. Aroma is perceived through the orthonasal pathway. In contrast, retronasal application of odors is thought to evoke different sensations from the orthonasal pathway, which is typically perceived as taste and modifies taste. Therefore, the effect of retronasal odor on salt-reduction might be different from that of aroma, that is, orthonasal odor. Thus, the effects of the retronasal odor of dried bonito stock on the enhancement and improvement of palatability upon salt reduction were examined using sensory evaluation. Moreover, the contributions to flavor expression and palatability of dried bonito stock were also investigated. Although the retronasal odor of dried bonito did not enhance saltiness, it improved the palatability of saltiness. In the presence of no tastants except 0.68% NaCl, a content 15% less than that of Japanese traditional soup, the retronasal odor of dried bonito generated umami, enhanced the suitability for dried bonito stock, and increased palatability. This indicates that the retronasal odor of dried bonito stock could improve the palatability of a salt-reduced diet. These findings can be applied to the development of new seasonings for improving the palatability of salt-reduced foods.

  17. 46 CFR 169.666 - Generators and motors.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Generators and motors. 169.666 Section 169.666 Shipping... of Less Than 100 Gross Tons § 169.666 Generators and motors. (a) Each vessel of more than 65 feet in...) Each generator and motor must be in a location that is accessible, adequately ventilated, and as dry...

  18. 46 CFR 183.320 - Generators and motors.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Generators and motors. 183.320 Section 183.320 Shipping...) ELECTRICAL INSTALLATION Power Sources and Distribution Systems § 183.320 Generators and motors. (a) Each generator and motor must be: (1) In a location that is accessible, adequately ventilated, and as dry...

  19. Impingement drying for preparing dried apple pomace flour and its fortification in bakery and meat products.

    Science.gov (United States)

    Jung, Jooyeoun; Cavender, George; Zhao, Yanyun

    2015-09-01

    This study aimed to evaluate impingement drying (ID) as a rapid drying method to dry wet apple pomace (WAP) and to investigate the fortification of dried apple pomace flour (APF) or WAP in bakery and meat products. ID at ~110 °C reduced the moisture content of apple pomace from 80 % (wet basis) to 4.5 % within 3 h, compared with 24 h to 2.2 % using 40 °C forced-air drying and ~60 h to 2.3 % using freeze drying. Furthermore, ID enhanced the extractable phenolic compounds, allowing for a 58 % increase in total phenolic content (TPC) compared with wet pomace, a 110 % and 83 % higher than TPC in forced-air dried and freeze dried samples, respectively. The 15-20 % APF-fortified cookies were found to be ~44-59 % softer, ~30 % more chewy, and ~14 % moister than those of the control. WAP-fortified meat products had significantly higher dietary fiber content (0.7-1.8 % vs. 0.1-0.2 % in control) and radical scavenging activity than that of the control. These results suggest that impingement drying is a fast and effective method for preparing dried APF with highly retained bioactive compounds, and apple pomace fortified products maintained or even had improved quality.

  20. Investigation of drying kinetics of tomato slices dried by using a closed loop heat pump dryer

    Science.gov (United States)

    Coşkun, Salih; Doymaz, İbrahim; Tunçkal, Cüneyt; Erdoğan, Seçil

    2016-11-01

    In this study, tomato slices were dried at three different drying air temperatures (35, 40 and 45 °C) and at 1 m/s air velocities by using a closed loop heat pump dryer (HPD). To explain the drying characteristics of tomato slices, ten thin-layer drying models were applied. The drying of tomato slices at each temperature occurred in falling-rate period; no constant-rate period of drying was observed. The drying rate was significantly influenced by drying temperature. The effective moisture diffusivity varied between 8.28 × 10-11 and 1.41 × 10-10 m2/s, the activation energy was found to be 43.12 kJ/mol. Besides, at the end of drying process, the highest mean specific moisture extraction ratio and coefficient of performance of HPD system were obtained as 0.324 kg/kWh and 2.71, respectively, at the highest drying air temperature (45 °C).

  1. Investigation of drying kinetics of tomato slices dried by using a closed loop heat pump dryer

    Science.gov (United States)

    Coşkun, Salih; Doymaz, İbrahim; Tunçkal, Cüneyt; Erdoğan, Seçil

    2017-06-01

    In this study, tomato slices were dried at three different drying air temperatures (35, 40 and 45 °C) and at 1 m/s air velocities by using a closed loop heat pump dryer (HPD). To explain the drying characteristics of tomato slices, ten thin-layer drying models were applied. The drying of tomato slices at each temperature occurred in falling-rate period; no constant-rate period of drying was observed. The drying rate was significantly influenced by drying temperature. The effective moisture diffusivity varied between 8.28 × 10-11 and 1.41 × 10-10 m2/s, the activation energy was found to be 43.12 kJ/mol. Besides, at the end of drying process, the highest mean specific moisture extraction ratio and coefficient of performance of HPD system were obtained as 0.324 kg/kWh and 2.71, respectively, at the highest drying air temperature (45 °C).

  2. Determination of temperature dependent drying parameters for potato cylinders and slices during solar drying

    Energy Technology Data Exchange (ETDEWEB)

    Tripathy, P.P.; Kumar, Subodh [Centre for Energy Studies, Indian Institute of Technology Delhi, Hauz Khas, New Delhi 110 016 (India)

    2008-11-15

    In the present work, a methodology for the determination of temperature dependent drying parameters namely drying constant and lag factor from the experimental drying kinetic curves of food product is proposed. A laboratory scale mixed-mode solar dryer consisting of an inclined flat plate solar collector connected in series to a drying chamber glazed at the top was used to perform natural convection drying experiments with potato cylinders of length 0.05 m and diameter 0.01 m and slices of diameter 0.05 m and thickness 0.01 m. The thin-layer drying equation describing the drying behavior of food products is derived from Fick's law of diffusion. The present analysis reveals that both drying constant and lag factor increase with sample temperature, as expected. Linear and exponential correlations for these parameters are proposed to represent their variation as a function of sample temperature. Results of statistical error analysis indicate that the proposed linear correlation can better represent the experimental drying kinetic curves for both cylinders and slices. Comparison of experimental dimensionless moisture contents with those calculated with variable (temperature dependent) and constant values of drying parameters demonstrates that the predicted results from variable parameters can better simulate the experiments. (author)

  3. Degradation of LIM domain-binding protein three during processing of Spanish dry-cured ham.

    Science.gov (United States)

    Gallego, Marta; Mora, Leticia; Fraser, Paul D; Aristoy, María-Concepción; Toldrá, Fidel

    2014-04-15

    Extensive proteolysis takes place during the processing of dry-cured ham due to the action of muscle peptidases. The aim of this work was to study the degradation of LIM domain binding protein 3 (LDB3), which is located at the Z-lines of the sarcomere, at different times during the Spanish dry-cured ham processing (2, 3.5, 5, 6.5, and 9 months). A total of 107 peptides have been identified by mass spectrometry, most of them generated from the first region of the protein sequence (position 1-90) providing evidence for the complexity and variability of proteolytic reactions throughout the whole process of dry-curing. Methionine oxidation has been observed in several peptides by the end of the process. The potential of some of the identified peptides to be used as biomarkers of dry-cured ham processing has also been considered.

  4. MATHEMATICAL MODELING OF ORANGE SEED DRYING KINETICS

    Directory of Open Access Journals (Sweden)

    Daniele Penteado Rosa

    2015-06-01

    Full Text Available Drying of orange seeds representing waste products from juice processing was studied in the temperatures of 40, 50, 60 and 70 °C and drying velocities of 0.6, 1.0 and 1.4 m/s. Experimental drying kinetics of orange seeds were obtained using a convective air forced dryer. Three thin-layer models: Page model, Lewis model, and the Henderson-Pabis model and the diffusive model were used to predict the drying curves. The Henderson-Pabis and the diffusive models show the best fitting performance and statistical evaluations. Moreover, the temperature dependence on the effective diffusivity followed an Arrhenius relationship, and the activation energies ranging from 16.174 to 16.842 kJ/mol

  5. Drying characteristics and engineering properties of fermented ...

    African Journals Online (AJOL)

    Drying characteristics and engineering properties of fermented ground cassava. ... African Journal of Biotechnology. Journal Home · ABOUT ... moisture content, specific heat capacity, thermal conductivity, thermal diffusivity and bulk density.

  6. Spalling Resistance Fast-drying Refractory Castables

    Institute of Scientific and Technical Information of China (English)

    Wang Jing; Peng Xigao

    2010-01-01

    @@ 1 Scope This standard specifies the term and definition,classification, technical requirements, test methods,quality appraisal procedures, packing, marking, transportation, storage, and quality certificate of spalling resistance fast-drying refractory castables.

  7. One-Dimensional Simulation of Clay Drying

    Directory of Open Access Journals (Sweden)

    Siljan Siljan

    2002-04-01

    Full Text Available Drying of clay is simulated by a one-dimensional model. The background of the work is to form a better basis for investigation of the drying process in production of clay-based building materials. A model of one-dimensional heat and mass transfer in porous material is used and modified to simulate drying of clay particles. The convective terms are discretized by first-order upwinding, and the diffusive terms are discretized by central differencing. DASSL was used to solve the set of algebraic and differential equations. The different simulations show the effect of permeability, initial moisture content and different boundary conditions. Both drying of a flat plate and a spherical particle are modelled.

  8. Well-plate freeze-drying

    DEFF Research Database (Denmark)

    Trnka, Hjalte; Rantanen, Jukka; Grohganz, Holger

    2015-01-01

    due to increasing amount of amorphous matter in the samples was observed in both vials and well plates. Cake collapse was found to be representative in well plates and could be effectively quantified using image analysis. Reconstitution time was also found to be equal in all three platforms. Finally......Abstract Context: Freeze-drying in presence of excipients is a common practice to stabilize biomacromolecular formulations. The composition of this formulation is known to affect the quality of the final product. Objective: The aim of this study was to evaluate freeze-drying in well-plates...... as a high throughput platform for formulation screening of freeze-dried products. Methods: Model formulations consisting of mannitol, sucrose and bovine serum albumin were freeze-dried in brass well plates, plastic well plates and vials. Physical properties investigated were solid form, residual moisture...

  9. Cold vacuum drying facility design requirements

    Energy Technology Data Exchange (ETDEWEB)

    Irwin, J.J.

    1997-09-24

    This release of the Design Requirements Document is a complete restructuring and rewrite to the document previously prepared and released for project W-441 to record the design basis for the design of the Cold Vacuum Drying Facility.

  10. Water Reclamation using Spray Drying Project

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose a new spray drying technology for the recovery and recycle of water while stabilizing the solid wastes or residues as found in advanced life support...

  11. Consumer Acceptance of Dry Dog Food Variations

    National Research Council Canada - National Science Library

    Di Donfrancesco, Brizio; Koppel, Kadri; Swaney-Stueve, Marianne; Chambers, Edgar

    2014-01-01

    The objectives of this study were to compare the acceptance of different dry dog food products by consumers, determine consumer clusters for acceptance, and identify the characteristics of dog food...

  12. Extrusion processing : effects on dry canine diets

    NARCIS (Netherlands)

    Tran, Q.D.

    2008-01-01

    Keywords: Extrusion, Canine diet, Protein, Lysine, Starch gelatinization, Palatability, Drying. Extrusion cooking is a useful and economical tool for processing animal feed. This high temperature, short time processing technology causes chemical and physical changes that alter the nutritional and

  13. Water Reclamation using Spray Drying Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This purpose of this project is to develop a spray drying prototype to for the recovery and recycle of water from concentrated waste water recovery system brine....

  14. Dry Mouth: MedlinePlus Health Topic

    Science.gov (United States)

    ... I Do about Dry Mouth? (National Institute of Dental and Craniofacial Research) Clinical Trials ClinicalTrials.gov: Xerostomia (National Institutes of Health) Journal Articles References and abstracts from MEDLINE/PubMed (National ...

  15. Kinetics of microwave drying of apples

    Directory of Open Access Journals (Sweden)

    G. V. Kalashnikov

    2012-01-01

    Full Text Available The influence of main technological parameters was studied as a result of research of microwave drying of apples and the analysis of kinetic regularity of the process was performed.

  16. A drying coefficient for building materials

    DEFF Research Database (Denmark)

    Scheffler, Gregor Albrecht; Plagge, Rudolf

    2009-01-01

    The drying experiment is an important element of the hygrothermal characterisation of building materials. Contrary to other moisture transport experiments as the vapour diffusion and the water absorption test, it is until now not possible to derive a simple coefficient for the drying. However...... coefficient is defined which can be determined based on measured drying data. The correlation of this coefficient with the water absorption and the vapour diffusion coefficient is analyzed and its additional information content is critically challenged. As result, a drying coefficient has been derived...... and defined as a new and independent material parameter. It contains information about the moisture transport properties throughout the wide range of moisture contents from hygroscopic up to saturation. With this new and valuable coefficient, it is now possible to distinguish and select building materials...

  17. Nitrogen loss during solar drying of biosolids.

    Science.gov (United States)

    O'Shaughnessy, S A; Song, I; Artiola, J F; Choi, C Y

    2008-01-01

    Solar drying has been used extensively to dewater biosolids for ease of transportation and to a lesser degree to reduce pathogens prior to land application. The nitrogen in biosolids makes them a relatively inexpensive but valuable source of fertilizer. In this study, nitrogen loss from tilled and untilled biosolids was investigated during the solar drying process. Samples of aerobically and anaerobically digested biosolids during three solar drying experiments were analyzed for their nitrate (NO3-) and ammonium (NH4+) ions concentrations. Nitrogen losses varied depending on the solar drying season and tillage. Although not directly measured, the majority of nitrogen loss occurred through ammonia volatilization; organic nitrogen content (organic N) remained relatively stable for each sample, nitrate concentrations for the majority of samples remained below detectable levels and the decline of ammonium-nitrogen (NH4(+)-N) generally followed the trend of moisture loss in the biosolids.

  18. Development of Solar Biomass Drying System

    OpenAIRE

    Atnaw Samson Mekbib; Bin Che Ku Yahya Che Ku Mohammad Faizal; Jama Oumer Abduaziz

    2017-01-01

    The purpose of this paper focuses on the experimental pre-treatment of biomass in agricultural site using solar energy as power source and contribution of common use and efficiency solar dryer system for consumer. The main purpose of this design for solar cabinet dryer is to dry biomass via direct and indirect heating. Direct heating is the simplest method to dry biomass by exposing the biomass under direct sunlight. The solar cabinet dryer traps solar heat to increase the temperature of the ...

  19. Consumer Acceptance of Dry Dog Food Variations

    OpenAIRE

    Brizio Di Donfrancesco; Kadri Koppel; Marianne Swaney-Stueve; Edgar Chambers

    2014-01-01

    Simple Summary The objectives of this study were to compare the acceptance of different dry dog food products by consumers, determine consumer clusters for acceptance, and identify the characteristics of dog food that drive consumer acceptance. Pet owners evaluated dry dog food samples available in the US market. The results indicated that appearance of the sample, especially the color, influenced pet owner’s overall liking more than the aroma of the product. Abstract The objectives of this s...

  20. Methane storage in dry water gas hydrates.

    Science.gov (United States)

    Wang, Weixing; Bray, Christopher L; Adams, Dave J; Cooper, Andrew I

    2008-09-03

    Dry water stores 175 v(STP)/v methane at 2.7 MPa and 273.2 K in a hydrate form which is close to the Department of Energy volumetric target for methane storage. Dry water is a silica-stabilized free-flowing powder (95% wt water), and fast methane uptakes were observed (90% saturation uptake in 160 min with no mixing) as a result of the relatively large surface-to-volume ratio of this material.

  1. Freeze-drying of lactic acid bacteria.

    Science.gov (United States)

    Fonseca, Fernanda; Cenard, Stéphanie; Passot, Stéphanie

    2015-01-01

    Lactic acid bacteria are of great importance for the food and biotechnology industry. They are widely used as starters for manufacturing food (e.g., yogurt, cheese, fermented meats, and vegetables) and probiotic products, as well as for green chemistry applications. Freeze-drying or lyophilization is a convenient method for preservation of bacteria. By reducing water activity to values below 0.2, it allows long-term storage and low-cost distribution at suprazero temperatures, while minimizing losses in viability and functionality. Stabilization of bacteria via freeze-drying starts with the addition of a protectant solution to the bacterial suspension. Freeze-drying includes three steps, namely, (1) freezing of the concentrated and protected cell suspension, (2) primary drying to remove ice by sublimation, and (3) secondary drying to remove unfrozen water by desorption. In this chapter we describe a method for freeze-drying of lactic acid bacteria at a pilot scale, thus allowing control of the process parameters for maximal survival and functionality recovery.

  2. Drying a tuberculosis vaccine without freezing.

    Science.gov (United States)

    Wong, Yun-Ling; Sampson, Samantha; Germishuizen, Willem Andreas; Goonesekera, Sunali; Caponetti, Giovanni; Sadoff, Jerry; Bloom, Barry R; Edwards, David

    2007-02-20

    With the increasing incidence of tuberculosis and drug resistant disease in developing countries due to HIV/AIDS, there is a need for vaccines that are more effective than the present bacillus Calmette-Guérin (BCG) vaccine. We demonstrate that BCG vaccine can be dried without traditional freezing and maintained with remarkable refrigerated and room-temperature stability for months through spray drying. Studies with a model Mycobacterium (Mycobacterium smegmatis) revealed that by removing salts and cryoprotectant (e.g., glycerol) from bacterial suspensions, the significant osmotic pressures that are normally produced on bacterial membranes through droplet drying can be reduced sufficiently to minimize loss of viability on drying by up to 2 orders of magnitude. By placing the bacteria in a matrix of leucine, high-yield, free-flowing, "vial-fillable" powders of bacteria (including M. smegmatis and M. bovis BCG) can be produced. These powders show relatively minor losses of activity after maintenance at 4 degrees C and 25 degrees C up to and beyond 4 months. Comparisons with lyophilized material prepared both with the same formulation and with a commercial formulation reveal that the spray-dried BCG has better overall viability on drying.

  3. Sex hormones and the dry eye.

    Science.gov (United States)

    Truong, Susan; Cole, Nerida; Stapleton, Fiona; Golebiowski, Blanka

    2014-07-01

    The greater prevalence of dry eye in women compared to men suggests that sex hormones may have a role in this condition. This review aims to present evidence for how sex hormones may affect the ocular structures involved in the production, regulation and maintenance of the normal tear film. It is hypothesised that hormone changes alter the homeostasis of the ocular surface and contribute to dry eye. Androgens impact on the structure and function of the meibomian and lacrimal glands and therefore androgen deficiency is, at least in part, associated with the aetiology of dry eye. In contrast, reports of the effects of oestrogen and progesterone on these ocular structures and on the conjunctiva are contradictory and the mechanisms of action of these female-specific sex hormones in the eye are not well understood. The uncertainty of the effects of oestrogen and progesterone on dry eye symptoms is reflected in the controversial relationship between hormone replacement therapy and the signs and symptoms of dry eye. Current understanding of sex hormone influences on the immune system suggests that oestrogen may modulate a cascade of inflammatory events, which underlie dry eye.

  4. Cryopreservation of spin-dried mammalian cells.

    Science.gov (United States)

    Chakraborty, Nilay; Menze, Michael A; Malsam, Jason; Aksan, Alptekin; Hand, Steven C; Toner, Mehmet

    2011-01-01

    This study reports an alternative approach to achieve vitrification where cells are pre-desiccated prior to cooling to cryogenic temperatures for storage. Chinese Hamster Ovary (CHO) cells suspended in a trehalose solution were rapidly and uniformly desiccated to a low moisture content (spin-drying technique. Trehalose was also introduced into the cells using a high-capacity trehalose transporter (TRET1). Fourier Transform Infrared Spectroscopy (FTIR) was used to examine the uniformity of water concentration distribution in the spin-dried samples. 62% of the cells were shown to survive spin-drying in the presence of trehalose following immediate rehydration. The spin-dried samples were stored in liquid nitrogen (LN(2)) at a vitrified state. It was shown that following re-warming to room temperature and re-hydration with a fully complemented cell culture medium, 51% of the spin-dried and vitrified cells survived and demonstrated normal growth characteristics. Spin-drying is a novel strategy that can be used to improve cryopreservation outcome by promoting rapid vitrification.

  5. Development of Solar Biomass Drying System

    Directory of Open Access Journals (Sweden)

    Atnaw Samson Mekbib

    2017-01-01

    Full Text Available The purpose of this paper focuses on the experimental pre-treatment of biomass in agricultural site using solar energy as power source and contribution of common use and efficiency solar dryer system for consumer. The main purpose of this design for solar cabinet dryer is to dry biomass via direct and indirect heating. Direct heating is the simplest method to dry biomass by exposing the biomass under direct sunlight. The solar cabinet dryer traps solar heat to increase the temperature of the drying chamber. The biomass absorbs the heat and transforms the moisture content within the biomass into water vapour and then leaves the chamber via the exhaust air outlet. This problem however can be solved by adopting indirect solar drying system. High and controllable temperatures can be achieved as a fan is used to move the air through the solar collector. This project has successfully created a solar cabinet dryer that combines both direct and indirect solar drying systems and functions to dry biomass as well as crops effectively and efficiently with minimal maintenance. Hence, it is indeed a substitution for conventional dryers which are affordable to local farmers.

  6. Method and apparatus for in-situ drying investigation and optimization of slurry drying methodology

    Science.gov (United States)

    Armstrong, Beth L.; Daniel, Claus; Howe, Jane Y.; Kiggans, Jr, James O.; Sabau, Adrian S.; Wood, III, David L.; Kalnaus, Sergiy

    2016-05-10

    A method of drying casted slurries that includes calculating drying conditions from an experimental model for a cast slurry and forming a cast film. An infrared heating probe is positioned on one side of the casted slurry and a thermal probe is positioned on an opposing side of the casted slurry. The infrared heating probe may control the temperature of the casted slurry during drying. The casted slurry may be observed with an optical microscope, while applying the drying conditions from the experimental model. Observing the casted slurry includes detecting the incidence of micro-structural changes in the casted slurry during drying to determine if the drying conditions from the experimental model are optimal.

  7. The influence of the dried blood spot drying time on the recoveries of six immunosuppressants

    Directory of Open Access Journals (Sweden)

    Remco A. Koster

    2015-10-01

    Full Text Available Investigation of the drying time of dried blood spots (DBS is currently not included in DBS validations. The influence of the DBS drying time on the recovery of tacrolimus, ascomycin, sirolimus, everolimus, cyclosporin A and temsirolimus was evaluated by measuring DBS with a fixed blood volume at a hematocrit range between 0.1 and 0.6 L/L at 3, 24 and 48 hours of drying time. Results showed that the recovery of sirolimus, everolimus, temsirolimus and cyclosporin A was influenced by the DBS drying time, while the recovery of tacrolimus and ascomycin was not. A drying time of at least 24 hours is advised in order to stabilize hematocrit and concentration related recovery effects of sirolimus, everolimus, temsirolimus and cyclosporin A.

  8. Microwave generator

    Science.gov (United States)

    Kwan, T.J.T.; Snell, C.M.

    1987-03-31

    A microwave generator is provided for generating microwaves substantially from virtual cathode oscillation. Electrons are emitted from a cathode and accelerated to an anode which is spaced apart from the cathode. The anode has an annular slit there through effective to form the virtual cathode. The anode is at least one range thickness relative to electrons reflecting from the virtual cathode. A magnet is provided to produce an optimum magnetic field having the field strength effective to form an annular beam from the emitted electrons in substantial alignment with the annular anode slit. The magnetic field, however, does permit the reflected electrons to axially diverge from the annular beam. The reflected electrons are absorbed by the anode in returning to the real cathode, such that substantially no reflexing electrons occur. The resulting microwaves are produced with a single dominant mode and are substantially monochromatic relative to conventional virtual cathode microwave generators. 6 figs.

  9. Spray drying technique: II. Current applications in pharmaceutical technology.

    Science.gov (United States)

    Sollohub, Krzysztof; Cal, Krzysztof

    2010-02-01

    This review presents current applications of spray drying in pharmaceutical technology. The topics discussed include the obtention of excipients and cospray dried composites, methods for increasing the aqueous solubility and bioavailability of active substances, and modified release profiles from spray-dried particles. This review also describes the use of the spray drying technique in the context of biological therapies, such as the spray drying of proteins, inhalable powders, and viable organisms, and the modification of the physical properties of dry plant extracts.

  10. Solar Generator

    Science.gov (United States)

    1985-01-01

    The Vanguard I dish-Stirling module program, initiated in 1982, produced the Vanguard I module, a commercial prototype erected by the Advanco Corporation. The module, which automatically tracks the sun, combines JPL mirrored concentrator technology, an advanced Stirling Solar II engine/generator, a low cost microprocessor-controlled parabolic dish. Vanguard I has a 28% sunlight to electricity conversion efficiency. If tests continue to prove the system effective, Advanco will construct a generating plant to sell electricity to local utilities. An agreement has also been signed with McDonnell Douglas to manufacture a similar module.

  11. DRYING OF EMPTY FRUIT BUNCHES AS WASTED BIOMASS BY HYBRID SOLAR–THERMAL DRYING TECHNIQUE

    OpenAIRE

    H. H. Al-Kayiem; Y. Md Yunus

    2013-01-01

    Solar drying of EFB is highly feasible and economic, but the solar drying process is interrupted during cloudy or rainy days and also at night. In the present paper, a combined solar, as the main heat input, and biomass burner, as an auxiliary source of thermal energy, has been investigated experimentally to dry EFB. An experimental model consisting of a solar dryer integrated with a thermal backup unit was designed and fabricated. A series of experimental measurements were carried out in fou...

  12. Open sun drying of green bean: influence of pretreatments on drying kinetics, colour and rehydration capacity

    Science.gov (United States)

    İsmail, Osman; Kantürk Figen, Aysel; Pişkin, Sabriye

    2017-04-01

    Green bean ( Phaseolus Vulgaris L), classified under legume family, is a primary source of dietary protein in human diets especially in the agricultural countries. Green bean is susceptible to rapid deterioration because of their high moisture content and in order to prevent and present the green bean drying process is applied. In this study, effects of pretreatments on drying kinetics, colour and rehydration capacity of green bean were investigated. It was observed that the pretreatment affected the drying time. The shortest drying times were obtained from pretreated samples with blanched. Drying times were determined as 47, 41 and 29 h for natural, salted and blanch, respectively. The results showed that pretreatment and ambient temperature significantly ( P = 0.05) affected the drying rate and the drying time. The effective moisture diffusivity was determined by using Fick's second law and was found to be range between 3.15 × 10-10 and 1.2 × 10-10 m2/s for the pre-treated and natural green bean samples. The rehydration values were obtained 2.75, 2.71, 2.29 (g water/g dry matter) for the blanched, salted and natural samples. The effective diffusion coefficients were calculated using the data collected during the falling rate period and the experimental data are fitted to seven thin layer drying models which found in the literature. The Logarithmic model was found to best describe the drying behavior of fresh green beans under open air sun. Rehydration time and color parameters had been determined in order to improve the quality of dried green bean. Regarding with rehydration time and colour data, the best results were obtained at blanched drying conditions.

  13. Open sun drying of green bean: influence of pretreatments on drying kinetics, colour and rehydration capacity

    Science.gov (United States)

    İsmail, Osman; Kantürk Figen, Aysel; Pişkin, Sabriye

    2016-08-01

    Green bean (Phaseolus Vulgaris L), classified under legume family, is a primary source of dietary protein in human diets especially in the agricultural countries. Green bean is susceptible to rapid deterioration because of their high moisture content and in order to prevent and present the green bean drying process is applied. In this study, effects of pretreatments on drying kinetics, colour and rehydration capacity of green bean were investigated. It was observed that the pretreatment affected the drying time. The shortest drying times were obtained from pretreated samples with blanched. Drying times were determined as 47, 41 and 29 h for natural, salted and blanch, respectively. The results showed that pretreatment and ambient temperature significantly (P = 0.05) affected the drying rate and the drying time. The effective moisture diffusivity was determined by using Fick's second law and was found to be range between 3.15 × 10-10 and 1.2 × 10-10 m2/s for the pre-treated and natural green bean samples. The rehydration values were obtained 2.75, 2.71, 2.29 (g water/g dry matter) for the blanched, salted and natural samples. The effective diffusion coefficients were calculated using the data collected during the falling rate period and the experimental data are fitted to seven thin layer drying models which found in the literature. The Logarithmic model was found to best describe the drying behavior of fresh green beans under open air sun. Rehydration time and color parameters had been determined in order to improve the quality of dried green bean. Regarding with rehydration time and colour data, the best results were obtained at blanched drying conditions.

  14. Investigation of pre-drying lignite in an existing Greek power plant

    Directory of Open Access Journals (Sweden)

    Agraniotis Michalis

    2012-01-01

    Full Text Available The application of lignite pre-drying technologies in next generation of lignite power plants by utilizing low pressure steam as a drying medium instead of hot recirculated flue gas - combined with thermal utilization of the vaporized coal moisture - is expected to bring efficiency increase of 2-4 percentage points in future lignite power plants compared with today’s state of the art. The pre-drying concept is of particular importance in Greek boilers firing lignite with a high water and ash content. The combustion of Greek predried lignite has been investigated experimentally and via numerical simulations in our previous research. This study focuses on the potential integration of a lignite pre-drying system in an existing Greek power plant with dry lignite co-firing thermal share of up to 30%. The radiative and convective heat fluxes to the boiler and the overall boiler heat balance is calculated for reference and dry lignite co-firing conditions by an in-house calculation code. The overall plant’s thermal cycle is then simulated using commercial thermal cycle calculation software. The net plant efficiency is in this way determined for reference and dry coal co-firing conditions. According to the simulation results the integration of a pre-drying system and the implementation of dry lignite co-firing may bring an efficiency increase of about 1.5 percentage points in existing Greek boilers. It is therefore considered as an important measure towards improving plant efficiency and reducing specific CO2 emissions in existing plants.

  15. Actin proteolysis during ripening of dry fermented sausages at different pH values.

    Science.gov (United States)

    Berardo, A; Devreese, B; De Maere, H; Stavropoulou, D A; Van Royen, G; Leroy, F; De Smet, S

    2017-04-15

    In dry fermented sausages, myofibrillar proteins undergo intense proteolysis generating small peptides and free amino acids that play a role in flavour generation. This study aimed to identify small peptides arising from actin proteolysis, as influenced by the type of processing. Two acidification profiles were imposed, in order to mimic the pH normally obtained in southern-type and northern-type dry fermented sausages. The identification of peptides was done by liquid chromatography coupled to mass spectrometry in a data-independent positive mode of acquisition (LC-MS(E)). During manufacturing of the dry fermented sausages, actin was highly proteolysed, especially in nine regions of the sequence. After fermentation, 52 and 42 actin-derived peptides were identified at high and low pH, respectively, which further increased to 66 and 144 peptides, respectively, at the end of ripening. Most peptides were released at the cleavage sites of cathepsins B and D, which thus play an important role.

  16. Characteristics of WWTP sludge after drying in greenhouse for agricultural purposes.

    Science.gov (United States)

    Lima, Márcia Regina Pereira; Zandonade, Eliana; Sobrinho, Pedro Alem

    2012-01-01

    The sludge generated by sewage treatment which meets regulatory standards can be used in agriculture. With this understanding, the focus of this study is the evaluation of the agricultural characteristics and inorganic substances in excess activated sludge, which was subjected to drying in a greenhouse. The variables (factor) evaluated during the drying process were: type of sludge (digested or not digested), addition of lime to the sludge, and the physical layout and rotation of sludge in the greenhouse. The parameters monitored for this assessment were moisture, volatile solids and pH. The greenhouse cover and sides were made of translucent plastic to allow the penetration of solar radiation and prevent water from entering. A impermeable floor was used. The sludge was generated in sewage treatment plants located in the metropolitan region of Grande Vitória, Espírito Santo, Brazil. The solar drying of wastewater sludge in a greenhouse presented satisfactory results.

  17. [Dry eye syndrome in rheumatoid arthritis patients].

    Science.gov (United States)

    Polanská, V; Hlinomazová, Z; Fojtík, Z; Nemec, P

    2007-11-01

    The aim of this cross-sectional study was to review the incidence of the dry eye syndrome in rheumatoid arthritis (RA) patients, evaluate the association among the incidence of the dry eye syndrome, presence of positive rheumatoid factor (RF), the RA stage, and the duration of the disease. The group consisted of altogether 100 patients, 16 men and 84 women; the average age was 58.9 years (SD 14.6). The average duration of RA was 12.3 years, SD 11.0. In each patient, the Schirmer test I was performed, the presence of the LIPCOF (Lid Parallel Conjunctival Folds) on the slit lamp was assessed, the BUT (Tear Break-Up Time) was measured and vital fluorescein staining was performed. In each patient the data of the presence or absence of the RF in the serum, RA severity according to the X-ray examination, and the disease duration were recorded. The Pearson's association test for nominal variables was used for statistical evaluation of the association between the rheumatoid arthritis presence and the dry eye syndrome. In our group of 100 patients, the Schirmer test I was positive in 67% of patients. Positive BUT was marked in 84 % of patients. The conjunctival folds were present in 45 % of patients only. The pathological findings after cornea fluorescein staining appeared in 18 % of patients. The dry eye syndrome incidence was marked in 74% of patients with RA. Subjective difficulties were declared by 38.3% of patients only. The local treatment was already established in 23.0% of patients only. We did not find statistically significant correlation between the RF positive rheumatoid arthritis appearance and dry eye syndrome, nor between the stage of the rheumatoid arthritis and presence of the dry eye syndrome. We proved statistical connection between the presence of dry eye syndrome and the duration of rheumatoid arthritis longer than 10 years. Keratoconjunctivitis sicca is the most common ocular complication in rheumatoid arthritis patients. We proved the connection

  18. Microbial growth responses upon rewetting dry soil

    Science.gov (United States)

    Meisner, Annelein; Rousk, Johannes; Bååth, Erland

    2015-04-01

    Increased rainfall and drought periods are expected to occur with current climate change, leading to fluctuations in soil moisture. Changes in soil moisture are known to affect carbon cycling. A pulse of carbon dioxide release (respiration) is often observed after rewetting a dry soil and a drying threshold is observed before this pulse emerges. Increased microbial activity is often assumed to be the cause for the pulse in respiration. Yet, the microbial growth responses that underlie this pulse are often not studied. The following questions will be addressed in this presentation. 1) Do fungal and bacterial growth explain the pulse in respiration upon rewetting a dry soil? 2) How does microbial growth respond to different drying intensities before rewetting? To answer the research questions, soils from Sweden, U.K. and Greenland were put in microcosms, air-dried for four days, a prolonged period or to different moisture content before rewetting. We measured soil respiration, fungal growth rates and/or bacterial growth rates at high temporal resolution during one week after rewetting. Our results suggest that the respiration pulse upon rewetting dry soil is not due to high microbial growth rates. During the first hours after rewetting, bacterial and fungal growth rates were low whereas the respiration rates were high. As such, there was a decoupling between the pulse in respiration and microbial growth rates. Two patterns of bacterial growth were observed upon rewetting the three different soils. In "pattern 1", bacteria started growing immediately in a linear pattern up to values similar as the moist control. In "pattern 2", bacteria started growing exponentially after a lag period of no growth with a second pulse of respiration occurring at the start of bacterial growth. Manipulating the drying intensity changed the patterns. Soils with "pattern 1" were changed to "pattern 2" when subjected to more extensive drying periods whereas soils with "pattern 2" were

  19. [Effect on quality of Scrophulariae Radix with modern drying technology].

    Science.gov (United States)

    Li, Hui-wei; Liu, Pei; Qian, Da-wei; Lu, Xue-jun; Guo, Sheng; Zhu, Zhen-hua; Duan, Jin-ao

    2015-11-01

    Modern drying technology was used to explore suitable drying process to provide scientific basis for improving drying processing methods of Scrophulariae Radix. Controlled temperature and humidity drying, vacuum drying apparatus, microwave vacuum drying apparatus, short infrared drying device were used to gain samples for analyzing. The character appearance, concentration of main components and power consumption indicators were chosen for preliminary judging. Six major components, including iridoids and phenylpropanoids were analyzed by UPLC-MS/MS method. The contents of polysaccharides were determined by UV-visible spectrophotometry. The character appearance with controlled temperature and humidity drying and short infrared drying meet the pharmacopoeia standard (Ch. p, edition 2015), while samples with vacuum and microwave vacuum drying apparatus didn't. Compared to fresh sample, concentrations of harpagide, harpagoside, aucubin and catalpol were lower in the dried samples. Angoroside-C showed no significant change before and after drying. Concentration of acteoside increased after drying. Samples with controlled temperature (70 degrees C) and humidity (15% - 10%) drying had high content and short drying time. The better drying process of Scrophulariae Radix was controlled temperature and humidity drying. The method will provide the reference for the drying technology standard of roots medicine.

  20. Thermally-dried immobilized kefir on casein as starter culture in dried whey cheese production.

    Science.gov (United States)

    Dimitrellou, D; Kourkoutas, Y; Koutinas, A A; Kanellaki, M

    2009-12-01

    The aim of the present study was to evaluate the use of thermally-dried immobilized kefir on casein as a starter culture for protein-enriched dried whey cheese. For comparison reasons, dried whey cheese with thermally-dried free kefir culture and with no starter culture were also produced. The effect of the nature of the culture, the ripening temperature and the ripening process on quality characteristics of the whey cheese was studied. The association of microbial groups during cheese maturation suggested repression of spoilage and protection from pathogens due to the thermally-dried kefir, as counts of coliforms, enterobacteria and staphylococci were significantly reduced in cheeses produced using thermally-dried kefir starter cultures. The effect of the starter culture on production of volatile compounds responsible for cheese flavor was also studied using the SPME GC/MS technique. Thermally-dried immobilized kefir starter culture resulted in an improved profile of aroma-related compounds. The preliminary sensory evaluation ascertained the soft, fine taste and the overall improved quality of cheese produced with the thermally-dried immobilized kefir. The potential of protein-based thermally-dried starter cultures in dairy products is finally highlighted and assessed.

  1. Vacuum Drying of Barberry Fruit (Berberis vulgaris and Selection of a Suitable Thin Layer Drying Model

    Directory of Open Access Journals (Sweden)

    Akram Sharifi

    2013-02-01

    Full Text Available In an investigation on kinetics of seedless barberry drying at 35, 45 and 55°C in vacuum and with water vapor and citric acid pre-treatments, the value of effective moisture Diffusivity (Deff was calculated using the second Fick's diffusion equation, activation energy was determined and drying process was simulated by 10 common mathematical equations of thin layer-drying models. Results which were obtained from regression analysis of studied models showed that approximation of diffusion model had the best fitting for vacuum-drying of barberries through available data. Drying barberry took place in the falling rate drying period and pre-treated samples had higher drying rate. The effective diffusivity coefficient for vacuum-drying of barberry fruits was evaluated between 0.022810-10 and 0.253810-10m2/s, which increased along with temperature rise. An Arrhenius equation for drying of seedless barberry with activation energy values ranged from 27.618 to 92.493 kJ/mol expressed the effect of temperature on moisture diffusivity.

  2. Raman mapping of mannitol/lysozyme particles produced via spray drying and single droplet drying

    DEFF Research Database (Denmark)

    Pekka Pajander, Jari; Matero, Sanni Elina; Sloth, Jakob

    2015-01-01

    PURPOSE: This study aimed to investigate the effect of a model protein on the solid state of a commonly used bulk agent in spray-dried formulations. METHODS: A series of lysozyme/mannitol formulations were spray-dried using a lab-scale spray dryer. Further, the surface temperature of drying droplet......-ray powder diffractometry (XRPD) and Raman microscopy. Partial Least Squares Discriminant Analysis was used for analyzing the Raman microscopy data. RESULTS: XRPD results indicated that a mixture of β-mannitol and α-mannitol was produced in the spray-drying process which was supported by the Raman analysis...

  3. Martian Generation

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Independent, Internet savvy and with their own Martian language, China’s post-90s generation is rewriting the rules of behavior september 14 was the 18th birth-day of Zhang Zhaoyu from Sichuan Province. He is a new student at Peking University,

  4. Generative Contexts

    Science.gov (United States)

    Lyles, Dan Allen

    Educational research has identified how science, technology, engineering, and mathematics (STEM) practice and education have underperforming metrics in racial and gender diversity, despite decades of intervention. These disparities are part of the construction of a culture of science that is alienating to these populations. Recent studies in a social science framework described as "Generative Justice" have suggested that the context of social and scientific practice might be modified to bring about more just and equitable relations among the disenfranchised by circulating the value they and their non-human allies create back to them in unalienated forms. What is not known are the underlying principles of social and material space that makes a system more or less generative. I employ an autoethnographic method at four sites: a high school science class; a farm committed to "Black and Brown liberation"; a summer program geared towards youth environmental mapping; and a summer workshop for Harlem middle school students. My findings suggest that by identifying instances where material affinity, participatory voice, and creative solidarity are mutually reinforcing, it is possible to create educational contexts that generate unalienated value, and circulate it back to the producers themselves. This cycle of generation may help explain how to create systems of justice that strengthen and grow themselves through successive iterations. The problem of lack of diversity in STEM may be addressed not merely by recruiting the best and the brightest from underrepresented populations, but by changing the context of STEM education to provide tools for its own systematic restructuring.

  5. Synchronous generators

    CERN Document Server

    Boldea, Ion

    2005-01-01

    This work begins with an introduction to energy resources and the main electric energy conversion solutions, along with efficiency and environmental merits and demerits. The classification and principles of various electric generator topologies are covered alongside their power ratings and main applications including constant-speed synchronous gene

  6. Radiatively Generated $\

    CERN Document Server

    Joshipura, A S; Joshipura, Anjan S.; Rindani, Saurabh D.

    2003-01-01

    We study the consequences of assuming that the mass scale $\\Delta_{odot}$ corresponding to the solar neutrino oscillations and mixing angle $U_{e3}$ corresponding to the electron neutrino oscillation at CHOOZ are radiatively generated through the standard electroweak gauge interactions. All the leptonic mass matrices having zero $\\Delta_{odot}$ and $U_{e3}$ at a high scale lead to a unique low energy value for the $\\Delta_{odot}$ which is determined by the (known) size of the radiative corrections, solar and the atmospheric mixing angle and the Majorana mass of the neutrino observed in neutrinoless double beta decay. This prediction leads to the following consequences: ($i$) The MSSM radiative corrections generate only the dark side of the solar neutrino solutions. ($ii$) The inverted mass hierarchy ($m,-m,0$) at the high scale fails in generating the LMA solution but it can lead to the LOW or vacuum solutions. ($iii$) The $\\Delta_{odot}$ generated in models with maximal solar mixing at a high scale is zero t...

  7. DRUM DRYER FOR DRYING THE PARTICULATE PRODUCTS

    Directory of Open Access Journals (Sweden)

    I. S. Iurova

    2014-01-01

    Full Text Available Summary. For raise effectiveness drying process drum-type installation in which drum the mechanism of creation of various zones providing a necessary temperature and hydrodynamic regime of process of drying in process of product passage on a drum and changes in it of a relationship of various forms of communication of a moisture, and also a process intensification at last stage of drying by creation разряжения in a continuous technological stream of drying is provided is offered. The drum provides formation of a zone of separation of heat-transfer agent by means of the dissector, zones of intensive drying by disposing lobate nozzles in chessboard order with a dividing ring, zones of separation of the completed heat-transfer agent from жома as a result of separator installation in which the elliptic disk having cuts on a straight line from edge to the centre places, with formation of the triangular slot for passage dried pulp and heat-transfer agent, and also zones the final drying by performance of a section of a drum matching to a zone perforated on which length are had spring-loaded lobate nozzles representing the blades connected bow-shaped rod with metal plates, had with outer side of a drum and under the form repeating its contour, thus the bow-shaped rod from the interior of a drum which ends are supplied by springs rest against overhead and bottom persistent screw nuts, and blades and metal plates are installed with possibility of twirl concerning a fastening place on a drum and supplied by reinforcing ribs.

  8. A numerical and experimental study of stress and crack development in kiln-dried wood

    DEFF Research Database (Denmark)

    Larsen, Finn; Ormarsson, Sigurdur

    2012-01-01

    Numerical and experimental investigations were carried out on well defined log-disc samples of Norway spruce consisting of both heartwood and sapwood, with the aim of gaining more adequate knowledge of stress and fracture generation during the drying process. Use of thin discs enabled a well...

  9. A numerical and experimental study of stress and crack development in kiln-dried wood

    DEFF Research Database (Denmark)

    Larsen, Finn; Ormarsson, Sigurdur

    2012-01-01

    Numerical and experimental investigations were carried out on well defined log-disc samples of Norway spruce consisting of both heartwood and sapwood, with the aim of gaining more adequate knowledge of stress and fracture generation during the drying process. Use of thin discs of a log enabled...

  10. A Molecular Explanation of How the Fog Is Produced When Dry Ice Is Placed in Water

    Science.gov (United States)

    Kuntzleman, Thomas S.; Ford, Nathan; No, Jin-Hwan; Ott, Mark E.

    2015-01-01

    Everyone enjoys seeing the cloudy white fog generated when solid carbon dioxide (dry ice) is placed in water. Have you ever wondered what physical and chemical processes occur to produce this fog? When asked this question, many chemical educators suggest that the fog is produced when atmospheric water vapor condenses on cold carbon dioxide gas…

  11. Production of ethanol from wheat straw by pretreatment and fermentation at high dry matter concentrations

    NARCIS (Netherlands)

    Groenestijn, J.W. van; Slomp, R.S.

    2011-01-01

    High concentrations of substrate and product are important for the economy of second-generation bioethanol production. By a dilute acid thermal pretreatment of large pieces of relatively dry wheat straw using a novel rapid heating method, followed by fed-batch preliquefaction with hydrolytic enzymes

  12. Estimating the opportunity costs of activities that cause degradation in tropical dry forest: Implications for REDD +

    NARCIS (Netherlands)

    Borrego, Armonia; Skutsch, Margaret

    2014-01-01

    The viability of national REDD + programs will depend in part on whether funds generated from sales of carbon credits are sufficient to cover the opportunity costs (OC) of forgone uses of the forest. We present the results of a study in which OC were estimated in dry tropical forest, in western Mexi

  13. Global Warming and 21st Century Drying

    Science.gov (United States)

    Cook, Benjamin I.; Smerdun, Jason E.; Seager, Richard; Coats, Sloan

    2014-01-01

    Global warming is expected to increase the frequency and intensity of droughts in the twenty-first century, but the relative contributions from changes in moisture supply (precipitation) versus evaporative demand (potential evapotranspiration; PET) have not been comprehensively assessed. Using output from a suite of general circulation model (GCM) simulations from phase 5 of the Coupled Model Intercomparison Project, projected twentyfirst century drying and wetting trends are investigated using two offline indices of surface moisture balance: the Palmer Drought Severity Index (PDSI) and the Standardized Precipitation Evapotranspiration Index (SPEI). PDSI and SPEI projections using precipitation and Penman- Monteith based PET changes from the GCMs generally agree, showing robust cross-model drying in western North America, Central America, the Mediterranean, southern Africa, and the Amazon and robust wetting occurring in the Northern Hemisphere high latitudes and east Africa (PDSI only). The SPEI is more sensitive to PET changes than the PDSI, especially in arid regions such as the Sahara and Middle East. Regional drying and wetting patterns largely mirror the spatially heterogeneous response of precipitation in the models, although drying in the PDSI and SPEI calculations extends beyond the regions of reduced precipitation. This expansion of drying areas is attributed to globally widespread increases in PET, caused by increases in surface net radiation and the vapor pressure deficit. Increased PET not only intensifies drying in areas where precipitation is already reduced, it also drives areas into drought that would otherwise experience little drying or even wetting from precipitation trends alone. This PET amplification effect is largest in the Northern Hemisphere mid-latitudes, and is especially pronounced in western North America, Europe, and southeast China. Compared to PDSI projections using precipitation changes only, the projections incorporating both

  14. Blanching, salting and sun drying of different pumpkin fruit slices.

    Science.gov (United States)

    Workneh, T S; Zinash, A; Woldetsadik, K

    2014-11-01

    The study was aimed at assessing the quality of pumpkin (Cucuribita Spp.) slices that were subjected to pre-drying treatments and drying using two drying methods (uncontrolled sun and oven) fruit accessions. Pre-drying had significant (P ≤ 0.05) effect on the quality of dried pumpkin slices. 10 % salt solution dipped pumpkin fruit slices had good chemical quality. The two-way interaction between drying methods and pre-drying treatments had significant (P ≤ 0.05) effect on chemical qualities. Pumpkin subjected to salt solution dipping treatment and oven dried had higher chemical concentrations. Among the pumpkin fruit accessions, pumpkin accession 8007 had the superior TSS, total sugar and sugar to acid ratio after drying. Among the three pre-drying treatment, salt solution dipping treatment had significant (P ≤ 0.05) effect and the most efficient pre-drying treatment to retain the quality of dried pumpkin fruits without significant chemical quality deterioration. Salt dipping treatment combined with low temperature (60 °C) oven air circulation drying is recommended to maintain quality of dried pumpkin slices. However, since direct sun drying needs extended drying time due to fluctuation in temperature, it is recommended to develop or select best successful solar dryer for use in combination with pre-drying salt dipping or blanching treatments.

  15. Test Plan for the Boiling Water Reactor Dry Cask Simulator

    Energy Technology Data Exchange (ETDEWEB)

    Durbin, Samuel [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Lindgren, Eric R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-11-01

    The thermal performance of commercial nuclear spent fuel dry storage casks are evaluated through detailed numerical analysis . These modeling efforts are completed by the vendor to demonstrate performance and regulatory compliance. The calculations are then independently verified by the Nuclear Regulatory Commission (NRC). Carefully measured data sets generated from testing of full sized casks or smaller cask analogs are widely recognized as vital for validating these models. Recent advances in dry storage cask designs have significantly increased the maximum thermal load allowed in a cask in part by increasing the efficiency of internal conduction pathways and by increasing the internal convection through greater canister helium pressure. These same vertical, canistered cask systems rely on ventilation between the canister and the overpack to convect heat away from the canister to the environment for both above and below-ground configurations. While several testing programs have been previously conducted, these earlier validation attempts did not capture the effects of elevated helium pressures or accurately portray the external convection of above-ground and below-ground canistered dry cask systems. The purpose of the investigation described in this report is to produce a data set that can be used to test the validity of the assumptions associated with the calculations presently used to determine steady-state cladding temperatures in modern vertical, canistered dry cask systems. The BWR cask simulator (BCS) has been designed in detail for both the above-ground and below-ground venting configurations. The pressure vessel representing the canister has been designed, fabricated, and pressure tested for a maximum allowable pressure (MAWP) rating of 24 bar at 400 deg C. An existing electrically heated but otherwise prototypic BWR Incoloy-clad test assembly is being deployed inside of a representative storage basket and cylindrical pressure vessel that represents the

  16. High-intensity drying processes: Impulse drying. Progress report on furnish evaluations for impulse drying commercialization demonstration

    Energy Technology Data Exchange (ETDEWEB)

    Orloff, D.I.; Phelan, P.M.; Rudman, I.

    1995-02-01

    Laboratory and pilot scale experiments were performed to identify potential furnishes and operating parameters for upcoming high-speed pilot scale trials and commercial demonstration of impulse drying of heavy weight grades of paper. Results indicate that hydrodynamic specific surface is highly dependent on sheet formation and prehandling. Mill refined pulp and machine paper were comparable to laboratory prepared samples in regards to permeability and impulse drying. Process variables such as platen surface coating, felt type, felt moisture, and presteaming temperature profiles were investigated. Substantial improvements in sheet smoothness were achieved.

  17. DRY MIX FOR OBTAINING FOAM CONCRETE

    Directory of Open Access Journals (Sweden)

    S. N. Leonovich

    2015-01-01

    Full Text Available Composition of a dry mix has been developed for production of non-autoclaved foam concrete with natural curing. The mix has been created on the basis of Portland cement, UFAPORE foaming agent, mineral additives (RSAM sulfoaluminate additive, MK-85 micro-silica and basalt fiber, plasticizing and accelerating “Citrate-T” additive and   redispersible Vinnapas-8034 H powder. It has been established that foam concrete with  density of 400–800 kg/m3, durability of 1,1–3,4 MPa, low water absorption (40–50 %, without shrinkable cracks has been formed while adding water of Water/Solid = 0.4–0.6 in the dry mix,  subsequent mechanical swelling and curing of foam mass.Introduction of the accelerating and plasticizing “Citrate-T” additive into composition of the dry mix leads to an increase of rheological properties in expanded foam mass and  time reduction of its drying and curing. An investigation on microstructure of foam-concrete chipping surface carried out with the help of a scanning electron microscope has shown that the introduction of  basalt fiber and redispersible Vinnapas-8034 H powder into the composition of the dry mix promotes formation of more finely-divided crystalline hydrates. Such approach makes it possible to change purposefully morphology of crystalline hydrates and gives the possibility to operate foam concrete structurization process.

  18. Dried fruits quality assessment by hyperspectral imaging

    Science.gov (United States)

    Serranti, Silvia; Gargiulo, Aldo; Bonifazi, Giuseppe

    2012-05-01

    Dried fruits products present different market values according to their quality. Such a quality is usually quantified in terms of freshness of the products, as well as presence of contaminants (pieces of shell, husk, and small stones), defects, mould and decays. The combination of these parameters, in terms of relative presence, represent a fundamental set of attributes conditioning dried fruits humans-senses-detectable-attributes (visual appearance, organolectic properties, etc.) and their overall quality in terms of marketable products. Sorting-selection strategies exist but sometimes they fail when a higher degree of detection is required especially if addressed to discriminate between dried fruits of relatively small dimensions and when aiming to perform an "early detection" of pathogen agents responsible of future moulds and decays development. Surface characteristics of dried fruits can be investigated by hyperspectral imaging (HSI). In this paper, specific and "ad hoc" applications addressed to propose quality detection logics, adopting a hyperspectral imaging (HSI) based approach, are described, compared and critically evaluated. Reflectance spectra of selected dried fruits (hazelnuts) of different quality and characterized by the presence of different contaminants and defects have been acquired by a laboratory device equipped with two HSI systems working in two different spectral ranges: visible-near infrared field (400-1000 nm) and near infrared field (1000-1700 nm). The spectra have been processed and results evaluated adopting both a simple and fast wavelength band ratio approach and a more sophisticated classification logic based on principal component (PCA) analysis.

  19. SILAGE CANE SUGAR ADDED WITH DRIED BREWER

    Directory of Open Access Journals (Sweden)

    W. J. R. Castro

    2015-02-01

    Full Text Available The objective of this experiment was to evaluate the fermentative parameters and chemical composition of silage cane sugar added with residue dried brewery. The experimental design was completely randomized with four treatments and four replications: 100% cane sugar; 90% of cane sugar + 10% residue dried brewer; 80% of cane sugar + 20% residue dried brewer and 70% cane sugar + 30% dried brewer based on natural matter, composed silages. The sugar cane was chopped in a stationary machine with forage particle size of approximately 2 cm, and homogenized manually with the additives. For storage chopped fresh weight were used in experimental silos capacity of about 4 liters. The results showed that the contents of dry matter and crude protein showed positive linear (P0.05 with mean value of 3.81, while for ether extract and ash results were positive linear (P0.05 for N ammonia presented average value of 4.18. It is concluded that the addition of brewer dehydrated improves the fermentation process of silage cane sugar, in addition to improving their nutritional characteristics.

  20. Aging: A Predisposition to Dry Eyes

    Directory of Open Access Journals (Sweden)

    Anushree Sharma

    2014-01-01

    Full Text Available Dry eye syndrome is a disease of the ocular surface and tear film that is prevalent in older adults. Even though the degree of visual acuity loss in dry eye patients is commonly mild-to-moderate, in the aging population, this minimal change in visual status can lead to a significant decrease in visual function and quality of life. A healthy ocular surface is maintained by appropriate tear production and tear drainage, and deficiencies in this delicate balance can lead to dryness. In the aging eye, risk factors such as polypharmacy, androgen deficiency, decreased blink rates, and oxidative stress can predispose the patient to developing dry eye that is frequently more severe, has higher economic costs, and leads to worse consequences to the well-being of the patient. Understanding why elderly patients are at higher risk for developing dry eyes can provide insights into the diagnosis and management of the growing number of older adults struggling with dry eye and minimize the burden of disease on our aging population.

  1. Dry needling for myofascial pain: prognostic factors.

    Science.gov (United States)

    Huang, Yuan-Ting; Lin, Shun-Yuan; Neoh, Choo-Aun; Wang, Kuo-Yang; Jean, Yen-Hsuan; Shi, Hon-Yi

    2011-08-01

    The study objectives were to evaluate outcomes in patients who have received dry needling treatments and to identify predictors of pain and disability. The study was a prospective cohort follow-up design. The study was conducted at the Pain Clinic at Pingtung Christian Hospital, Taiwan. Ninety-two (92) patients sick-listed for 3 months or longer for myofascial pain syndrome. From February to October 2008, participants were treated at the pain clinic with dry needling of trigger points and muscle stretches of the involved muscles. Data were collected by self-administered questionnaires to assess changes in pain intensity and pain interference. Data collection was performed at baseline and after 2, 4, and 8 weeks. Sociodemographic variables, symptom characteristics, and baseline outcome measures were analyzed using generalized estimating equation methodology. The proposed dry-needling protocol reduced pain intensity and pain interference. Long duration of pain symptoms, high pain intensity, poor quality of sleep, and repetitive stress were associated with poor outcomes. Dry needling is an effective treatment for reducing pain and pain interference. However, long pain duration, high pain intensity, poor quality of sleep, and repetitive stress are associated with poor outcomes. Treatment outcome depends not only on the dry needling protocol, but also on disease characteristics and patient demographic profile.

  2. Magnetocumulative generator

    Science.gov (United States)

    Pettibone, J.S.; Wheeler, P.C.

    1981-06-08

    An improved magnetocumulative generator is described that is useful for producing magnetic fields of very high energy content over large spatial volumes. The polar directed pleated magnetocumulative generator has a housing providing a housing chamber with an electrically conducting surface. The chamber forms a coaxial system having a small radius portion and a large radius portion. When a magnetic field is injected into the chamber, from an external source, most of the magnetic flux associated therewith positions itself in the small radius portion. The propagation of an explosive detonation through high-explosive layers disposed adjacent to the housing causes a phased closure of the chamber which sweeps most of the magnetic flux into the large radius portion of the coaxial system. The energy content of the magnetic field is greatly increased by flux stretching as well as by flux compression. The energy enhanced magnetic field is utilized within the housing chamber itself.

  3. Idea generation

    DEFF Research Database (Denmark)

    Tollestrup, Christian H. T.; Laursen, Linda Nhu

    2015-01-01

    of an idea generation whether the outset is ill defined and questioned as opposed to straightforward ideation on a proposal for a solution? The hypothesis is that an approach to ideation where ambiguity and discrepancy deliberately is sought creates more radical innovation that an approach without this...... as having new sociocultural meaning in line with Vergantis definition of radical innovation. This paper discusses the results of an experiment with 32 students on idea generation and product concept development. The experiment was setup as and A-B comparison between two set of students with the same...... different solutions when seeking ambiguity and discrepancy. Within the very limited experiment the conclusion seems to be very clear, it leads to more innovation if the designer seeks to question the framing and scope of the task. So seeking ambiguity and discrepancy in the ideation phase aligns...

  4. Photon generator

    Science.gov (United States)

    Srinivasan-Rao, Triveni

    2002-01-01

    A photon generator includes an electron gun for emitting an electron beam, a laser for emitting a laser beam, and an interaction ring wherein the laser beam repetitively collides with the electron beam for emitting a high energy photon beam therefrom in the exemplary form of x-rays. The interaction ring is a closed loop, sized and configured for circulating the electron beam with a period substantially equal to the period of the laser beam pulses for effecting repetitive collisions.

  5. Drying kinetics, rehydration and colour characteristics of convective hot-air drying of carrot slices

    Science.gov (United States)

    Doymaz, İbrahim

    2016-03-01

    The effects of air drying temperature, slice thickness and pre-treatment application on the drying kinetics of carrot slices during convective drying in the range 50-70 °C were investigated. Results indicated that drying time, rehydration ratio and colour characteristics of carrot slices were more affected by drying air temperature, followed by pre-treatment applications. Five thin-layer drying models were applied to describe the drying kinetics. Midilli et al. model was the best model to characterize the drying kinetics of carrot slices. The moisture effective diffusivity calculated from the second Fick's law of diffusion ranged from 3.46 × 10-10 to 1.02 × 10-9 m2/s. The values of activation energy determined from the slope of the Arrhenius plot, ln(D eff ) versus 1/(T + 273.15), were 35.53, 43.42, and 37.75 kJ/mol for blanch, potas and control samples, respectively.

  6. Persistence and survival of pathogens in dry foods and dry food processing environments

    NARCIS (Netherlands)

    L. Beuchat; E. Komitopoulou; R. Betts; H. Beckers; F. Bourdichon; H. Joosten; S. Fanning; B. ter Kuile

    2011-01-01

    Low-moisture foods and food ingredients, i.e., those appearing to be dry or that have been subjected to a drying process, represent important nutritional constituents of human diets. Some of these foods are naturally low in moisture, such as cereals, honey and nuts, whereas others are produced from

  7. COMPARISON OF DRY EYES IN POST- MENOPAUSAL WOMEN WITH AND WITHOUT SYMPTOMS OF DRY EYES

    Directory of Open Access Journals (Sweden)

    Mohana

    2014-10-01

    Full Text Available : PURPOSE: This study was done to evaluate the relationship between menopause and dry eyes, to assess the severity of dry eyes in symptomatic post-menopausal women and to validate Ocular Surface Disease Index. MATERIALS AND METHODS: In our study, cross sectional group comprised of 293 postmenopausal patients attending the postmenopausal clinic in Gynecology Out Patient Department and fulfilling our selection criteria. After noting the detailed history and demography, the Allergan Ocular Surface Disease Index (OSDI score was done. Visual acuity was assessed on Snellen’s chart and anterior segment evaluation was done with slit lamp biomicroscope. Dry eye evaluation was done with Schirmer and Tear film Break-Up Time (tBUT tests. RESULTS: The important ocular findings in postmenopausal women were foreign-body sensation and grittiness, hyperaemia, mucoid discharge and fluctuating or blurry vision. The overall prevalence of dry eye in symptomatic post-menopausal women was 82.97% which was statistically significant. (p<0.00 CONCLUSION: Results from the present study reveal that dry eye symptoms are common problems in postmenopausal women. The prevalence of dry eye in post-menopausal women with symptoms has significant association. Hence, examination for dry eye should be an integral part of the postmenopausal women especially those having dry eye symptoms.

  8. Drying kinetics, rehydration and colour characteristics of convective hot-air drying of carrot slices

    Science.gov (United States)

    Doymaz, İbrahim

    2017-01-01

    The effects of air drying temperature, slice thickness and pre-treatment application on the drying kinetics of carrot slices during convective drying in the range 50-70 °C were investigated. Results indicated that drying time, rehydration ratio and colour characteristics of carrot slices were more affected by drying air temperature, followed by pre-treatment applications. Five thin-layer drying models were applied to describe the drying kinetics. Midilli et al. model was the best model to characterize the drying kinetics of carrot slices. The moisture effective diffusivity calculated from the second Fick's law of diffusion ranged from 3.46 × 10-10 to 1.02 × 10-9 m2/s. The values of activation energy determined from the slope of the Arrhenius plot, ln( D eff ) versus 1/(T + 273.15), were 35.53, 43.42, and 37.75 kJ/mol for blanch, potas and control samples, respectively.

  9. PADDY DRYING IN MIXED ADSORPTION DRYER WITH ZEOLITE: DRYING RATE AND TIME ESTIMATION

    Directory of Open Access Journals (Sweden)

    Mochammad Djaeni

    2013-11-01

    Full Text Available Recently, the main problem of the rice stock and distribution in Indonesia is the quality degradation as indicated in unpleasant odor (smelly, stained, yellowness, and high percentage of broken rice. This is due to the low of paddy quality dried by from either direct sunlight or conventional fluidized bed dryer. As a result, the paddy cracks and breaks easily during milling in which causes the storage life being shorter as the enzymatic degradation by germ or fungi occurs. Air dehumidified with zeolite at drying medium temperature is potential to improve the quality of paddy. Zeolite is a material having high affinity to water vapor. In this case, the paddy and zeolite was mixed and fluidized with the air. The air will evaporate water from paddy, and at same time, the zeolite will adsorb water from air. Hence, the humidity of dryer can be kept low in which improves the driving force for drying. This work discusses the effect of presence of zeolite in the dryer, operational drying temperature, air velocity and relative humidity on drying rate of paddy. The results showed that increasing of zeolite as well as operational temperature increased the drying rate. In addition, using the model, the air dehumidification with zeolite and increase of air velocity can speed up drying time significantly at operational temperature below 80oC. This condition is very suitable for paddy drying since the quality degradation can be avoided.

  10. Development of dry gram-negative bacteria biocontrol products and small pilot tests against dry rot

    Science.gov (United States)

    Pseudomonas fluorescens strains S11:P:12, P22:Y:05, and S22:T:04 suppress four important storage potato maladies; dry rot, late blight, pink rot, and sprouting. Studies were designed to identify methods for producing a dried, efficacious biological control product. The strains were evaluated individ...

  11. Scalable organic solvent free supercritical fluid spray drying process for producing dry protein formulations.

    Science.gov (United States)

    Nuchuchua, O; Every, H A; Hofland, G W; Jiskoot, W

    2014-11-01

    In this study, we evaluated the influence of supercritical carbon dioxide (scCO2) spray drying conditions, in the absence of organic solvent, on the ability to produce dry protein/trehalose formulations at 1:10 and 1:4 (w/w) ratios. When using a 4L drying vessel, we found that decreasing the solution flow rate and solution volume, or increasing the scCO2 flow rate resulted in a significant reduction in the residual water content in dried products (Karl Fischer titration). The best conditions were then used to evaluate the ability to scale the scCO2 spray drying process from 4L to 10L chamber. The ratio of scCO2 and solution flow rate was kept constant. The products on both scales exhibited similar residual moisture contents, particle morphologies (SEM), and glass transition temperatures (DSC). After reconstitution, the lysozyme activity (enzymatic assay) and structure (circular dichroism, HP-SEC) were fully preserved, but the sub-visible particle content was slightly increased (flow imaging microscopy, nanoparticle tracking analysis). Furthermore, the drying condition was applicable to other proteins resulting in products of similar quality as the lysozyme formulations. In conclusion, we established scCO2 spray drying processing conditions for protein formulations without an organic solvent that holds promise for the industrial production of dry protein formulations.

  12. Model-based optimization of the primary drying step during freeze-drying

    DEFF Research Database (Denmark)

    Mortier, Séverine Thérèse F.C.; Van Bockstal, Pieter-Jan; Nopens, Ingmar;

    2015-01-01

    Since large molecules are considered the key driver for growth of the pharmaceutical industry, the focus of the pharmaceutical industry is shifting from small molecules to biopharmaceuticals: around 50% of the approved biopharmaceuticals are freeze-dried products. Therefore, freeze- drying is an ...

  13. ESEM drying tests: microcracking initiation in thin cement paste due to early age drying

    NARCIS (Netherlands)

    Jankovic, D.

    2009-01-01

    Scattered and discontinues microcracking as a subsequent side-effect of deformations due to early age drying, occurs in thin (approximately 1 mm thick) cement paste samples, when stepwise dried in ESEM. Microcracking of cement paste and restrains appear to be practically unavoidable. They are relate

  14. Impact of tilling on biosolids drying and indicator microorganisms survival during solar drying process.

    Science.gov (United States)

    Song, Inhong; Dominguez, Teodulo; Choi, Christopher Y; Kang, Moon Seong

    2014-01-01

    As biosolids application to croplands becomes a common practice, potential harm from pathogenic microbes needs to be mitigated for its safe reuse. The objective of this study was to investigate the impacts of tilling treatment on biosolids drying and microbial inactivation during the solar drying process in a semi-arid and temperate region. Solar drying experiments were conducted in sand and gravel dying beds open-to-the-air and under covering structures with biosolids to 20 cm depth from 2004 to 2006. Anaerobically- and Aerobically-digested biosolids received different tilling treatments throughout the drying process, while a series of biosolids samples were collected to determine the impact on total solids and microbial concentrations (Salmonella spp and heminth ova). Tilling treatments appeared to enhance the biosolids drying and microbial inactivation. Tilling was more effective during the cold season compared with the summer season and tilling treatments were also helpful in elevating biosolids temperature by expediting biosolids drying. The combined effect of temperature increase and moisture decrease by tilling may have resulted in faster microbial inactivation, particularly for persistent helminth ova. It was concluded that incorporation of tilling into biosolids solar drying can expedite biosolids drying as well as microbial inactivation, and thus can be an effective measure for shortening the biosolids conversion to Class A biosolids in which pathogens are reduced to below detectable levels.

  15. Combined influence of growth and drying conditions on the activity of dried Lactobacillus plantarum

    NARCIS (Netherlands)

    Linders, L.J.M.; Kets, E.P.W.; Bont, J.A.M. de; Riet, K.V. van 't

    1998-01-01

    The production of active dried starter cultures can be influenced at several levels in the production process. In this paper the following process factors are discussed: osmotic stress during growth and cell density prior to drying. Contradicting results are reported in the literature on the influen

  16. Evaluation of drying methods with respect to drying kinetics, mineral content and colour characteristics of rosemary leaves

    Energy Technology Data Exchange (ETDEWEB)

    Arslan, Derya [Selcuk University, Faculty of Agriculture, Department of Food Engineering, Konya (Turkey); Musa Ozcan, M. [Selcuk University, Faculty of Agriculture, Department of Food Engineering, Konya (Turkey)], E-mail: mozcan@selcuk.edu.tr

    2008-05-15

    Rosemary leaves (Rosmarinus officinalis L., Lamiaceae) were dried by using sun, oven (50 deg. C) and microwave oven (700 W, 2450 MHz) drying methods. Microwave oven drying shortened the drying time more than 99% when compared to the sun and oven drying methods. K, Ca, Na, Mg and P were the most abundant elements in the rosemary samples. The mineral content of oven dried rosemary leaves was higher than that of the sun and microwave dried samples. The logarithmic and Midilli and Kuecuek models were shown to give a good fit to the sun and oven drying. The Page, Modified Page and Midilli and Kuecuek models have shown a better fit to the experimental microwave oven drying data of rosemary leaves. Microwave oven drying revealed optimum colour values. Oven drying resulted in a considerable decrease in the colour quality of the rosemary leaves.

  17. 干旱期dry spell

    Institute of Scientific and Technical Information of China (English)

    孟杰

    2009-01-01

    上面的报道中,dry spell就是指“干旱期”,指的是降水偏少的一段时间,也就是气候上常说的“旱季”,还可以用dry season来表示。Spell在这里表示“连续的一段时间”。比如寒流过后,我们终于可以享受到a spell of warm weather(持续的温暖天气)。除了dry spell以外,常见的类似用法还有cold spell(春寒期),

  18. Scale formation in deluged dry cooling systems

    Energy Technology Data Exchange (ETDEWEB)

    Pratt, D.R.

    1976-05-01

    Deluging of air-cooled heat exchangers with water during warm periods holds the promise of increasing heat rejection capability and reducing the cost of dry cooling. One of the principal uncertainties in the use of the deluge concept is the tendency toward deposition of solids from the delugate. Small amounts of calcium carbonate scale may significantly reduce the cooling efficiency of a deluged system by reducing the heat transfer coefficient and interfering with delugate flow. Thus the question of delugate water quality is of major importance in evaluating scale formation and its effect on heat transfer in the deluged dry cooling system. The paper discusses, in relation to the deluged dry cooling system, the importance of scale prevention, the theory of scale formation and application of this theory to the deluged system, the problems of delugate evaporation, and delugate treatment required to prevent scaling.

  19. Diagnostic Procedures and Management of Dry Eye

    Science.gov (United States)

    Kaštelan, Snježana; Tomić, Martina; Salopek-Rabatić, Jasminka; Novak, Branko

    2013-01-01

    Dry eye disease or dysfunctional tear syndrome is among the most frequent diagnoses in ophthalmology. It is a multifactorial disease of the ocular surface and tear film which results in ocular discomfort, visual disturbances, and tear instability with potential damage to the cornea and conjunctiva. Risk factors for dry eye syndrome include age, sex (female gender), race, contact lens wear, environment with low humidity, systemic medications, and autoimmune disorders. The aim of this paper is to present the systematic classification, epidemiology, diagnostic procedures, and advances in the management of dry eye disease. The recent improvements in comprehending the underlying etiologic factors will inevitably improve future classifications and diagnostic abilities leading to more effective therapeutic options. Treatment of this highly prevalent condition can drastically improve the quality of life of individuals and prevent damage to the ocular surface. PMID:24024186

  20. Diagnostic Procedures and Management of Dry Eye

    Directory of Open Access Journals (Sweden)

    Snježana Kaštelan

    2013-01-01

    Full Text Available Dry eye disease or dysfunctional tear syndrome is among the most frequent diagnoses in ophthalmology. It is a multifactorial disease of the ocular surface and tear film which results in ocular discomfort, visual disturbances, and tear instability with potential damage to the cornea and conjunctiva. Risk factors for dry eye syndrome include age, sex (female gender, race, contact lens wear, environment with low humidity, systemic medications, and autoimmune disorders. The aim of this paper is to present the systematic classification, epidemiology, diagnostic procedures, and advances in the management of dry eye disease. The recent improvements in comprehending the underlying etiologic factors will inevitably improve future classifications and diagnostic abilities leading to more effective therapeutic options. Treatment of this highly prevalent condition can drastically improve the quality of life of individuals and prevent damage to the ocular surface.

  1. PERFORMANCE ASSESSMENT IN OPERATING DRY PORTS

    Directory of Open Access Journals (Sweden)

    Ciortescu Cezar-Gabriel

    2010-12-01

    Full Text Available In this paper, an approach for recognizing and defining correct and operable performance will be presented with the purpose of evaluating the effectiveness and efficiency of processes in dry ports (inland intermodal hubs. The challenge in evaluating the possible improvements of the underlying processes lies in the special nature and the complex structure of dry ports. It is important to consider that all the processes are highly interconnected and that changes in parameters in one process also have an impact on parameters in other processes. Furthermore, the performance of dry ports, seen as the backbone of the system, has a significant impact on the overall performance of the whole transportation network.

  2. Crust formation in drying colloidal suspensions

    KAUST Repository

    Style, R. W.

    2010-06-30

    During the drying of colloidal suspensions, the desiccation process causes the suspension near the air interface to consolidate into a connected porous matrix or crust. Fluid transport in the porous medium is governed by Darcy\\'s law and the equations of poroelasticity, while the equations of colloid physics govern processes in the suspension. We derive new equations describing this process, including unique boundary conditions coupling the two regions, yielding a moving-boundary model of the concentration and stress profiles during drying. A solution is found for the steady-state growth of a nedimensional crust during constant evaporation rate from the surface. The solution is used to demonstrate the importance of the system boundary conditions on stress profiles and diffusivity in a drying crust. © 2011 The Royal Society.

  3. The influence of lysozyme on mannitol polymorphism in freeze-dried and spray-dried formulations depends on the selection of the drying process

    DEFF Research Database (Denmark)

    Grohganz, Holger; Lee, Yan-Ying; Rantanen, Jukka

    2013-01-01

    -infrared spectroscopy in combination with multivariate analysis and further, results were verified with X-ray powder diffraction. It was seen that the prevalence of the mannitol polymorphic form shifted from ß-mannitol to d-mannitol with increasing protein concentration in freeze-dried formulations. In spray......-dried formulations an increase in protein concentration resulted in a shift from ß-mannitol to a-mannitol. An increase in final drying temperature of the freeze-drying process towards the temperature of the spray-drying process did not lead to significant changes. It can thus be concluded that it is the drying...

  4. Spray drying of lipid-based systems loaded with Camellia sinensis polyphenols.

    Science.gov (United States)

    Secolin, Vanessa A; Souza, Claudia R F; Oliveira, Wanderley P

    2017-03-01

    In this work, spray-dried lipid systems based on soy phosphatidylcholine, cholesterol and lauroyl polyoxylglycerides for entrapping Green tea polyphenols were produced. The aim was to study the effects of the encapsulating composition and spray drying conditions on the system performance and physicochemical product properties. The spray dryer powder production yield falls around 50.7 ± 2.8%, which is typical for lab scale spray dryers. Wrinkled and rounded particles, with low surface porosities were generated, independent of the drying carriers (trehalose or lactose) used. The product showed high encapsulation efficiency of Green tea polyphenols, which was promptly redispersible in water. It presented low density, and good compressive and flow properties. The results herein reported confirm the feasibility of the entrapment of Green tea polyphenols in lipid-based compositions by spray drying in presence of the drying carriers evaluated. The spray-dried microparticles show high potential to be used as additive in food, nutraceutical and pharmaceutical products.

  5. Development of a Microwave System for Highly-Efficient Drying of Fish

    Directory of Open Access Journals (Sweden)

    Yuttapong PIANROJ

    2006-06-01

    Full Text Available Dried fish is an important product of Nakhon Si Thammarat province, located in southern Thailand. Fish are conventionally dried using heat from the sun or heat from burning wood as energy sources. These drying methods have problems such as low efficiency and environmental problems. Exploiting the strong electric dipole of the water molecules in the fish, which allows the fish to absorb microwave energy effectively, we have developed a novel microwave heating system for the efficient drying of fish. The system utilizes a high-voltage power supply so that the magnetron can generate a microwave field continuously, and its output power can be adjusted from 0 - 200 W making it very different to commercial microwave oven. The waveguide is designed for effective transmission of microwave fields into the multi-mode heating cavity. The experimental results reveal that heat produced by the microwave system causes evaporation of moisture from the fish making it possible to produce high quality dried fish. The drying process also shows a dependence of fish surface temperature and moisture content on the radiation time and microwave power.

  6. Evaluation of dry solid waste recycling from municipal solid waste: case of Mashhad city, Iran.

    Science.gov (United States)

    Farzadkia, Mahdi; Jorfi, Sahand; Akbari, Hamideh; Ghasemi, Mehdi

    2012-01-01

    The recycling for recovery and reuse of material and energy resources undoubtedly provides a substantial alternative supply of raw materials and reduces the dependence on virgin feedstock. The main objective of this study was to assess the potential of dry municipal solid waste recycling in Mashhad city, Iran. Several questionnaires were prepared and distributed among various branches of the municipality, related organizations and people. The total amount of solid waste generated in Mashhad in 2008 was 594, 800  tons with per capita solid waste generation rate of 0.609  kg  person(-1) day(-1). Environmental educational programmes via mass media and direct education of civilians were implemented to publicize the advantages and necessity of recycling. The amount of recycled dry solid waste was increased from 2.42% of total dry solid waste (2588.36  ton  year(-1)) in 1999 to 7.22% (10, 165  ton  year(-1)) in 2008. The most important fractions of recycled dry solid waste in Mashhad included paper and board (51.33%), stale bread (14.59%), glass (9.73%), ferrous metals (9.73%), plastic (9.73%), polyethylene terephthalate (2.62%) and non-ferrous metals (0.97%). It can be concluded that unfortunately the potential of dry solid waste recycling in Mashhad has not been considered properly and there is a great effort to be made in order to achieve the desired conditions of recycling.

  7. Designing CAF-adjuvanted dry powder vaccines: Spray drying preserves the adjuvant activity of CAF01

    DEFF Research Database (Denmark)

    Ingvarsson, Pall Thor; Schmidt, Signe Tandrup; Christensen, Dennis

    2013-01-01

    spray drying. The optimal excipient to stabilize CAF01 during spray drying and for the design of nanocomposite microparticles was identified among mannitol, lactose and trehalose. Trehalose and lactose were promising stabilizers with respect to preserving liposome size, as compared to mannitol......Dry powder vaccine formulations are highly attractive due to improved storage stability and the possibility for particle engineering, as compared to liquid formulations. However, a prerequisite for formulating vaccines into dry formulations is that their physicochemical and adjuvant properties...... remain unchanged upon rehydration. Thus, we have identified and optimized the parameters of importance for the design of a spray dried powder formulation of the cationic liposomal adjuvant formulation 01 (CAF01) composed of dimethyldioctadecylammonium (DDA) bromide and trehalose 6,6′-dibehenate (TDB) via...

  8. The effect of slicing type on drying kinetics and quality of dried carrot

    Directory of Open Access Journals (Sweden)

    M Naghipour zadeh mahani

    2016-04-01

    Full Text Available Introduction: Carrot is one of the most common vegetables used for human nutrition because of its high vitamin and fiber contents. Drying improves the product shelf life without addition of any chemical preservative and reduces both the size of package and the transport cost. Drying also aidsto reduce postharvest losses of fruits and vegetables especially, which can be as high as 70%. Dried carrots are used in dehydrated soups and in the form of powder in pastries and sauces. The main aim of drying agricultural products is decrease the moisture content to a level which allows safe storage over an extended period. Many fruits and vegetables can be sliced before drying.because of different tissue of a fruit or vegetable, cutting them in different direction and shape created different tissue slices. Due to drying is the exiting process of the moisture from internal tissue so different tissue slices caused different drying kinetics. Therefore, the study on effect of cutting parameters on drying is necessary. Materials and Methods: Carrots (Daucus carota L. were purchased from the local market (Kerman, Iran and stored in a refrigerator at 5°C. The initial moisture contents of the Carrot samples were determined by the oven drying method. The sample was dried in an oven at 105±2°C about 24 hours. The carrots cut by 3 models blade at 3 directions. The samples were dried in an oven at 70°C. Moisture content of the carrot slices were determined by weighting of samples during drying. Volume changes because of sample shrinkage were measured by a water displacement method. Rehydration experiment was performed by immersing a weighted amount of dried samples into hot water 50 °C for 30 min. In this study the effect of some cutting parameters was considered on carrot drying and the quality of final drying product. The tests were performed as a completely random design. The effects of carrot thickness at two levels (3 and 6 mm, blade in 3 models (flat blade

  9. The effect of slicing type on drying kinetics and quality of dried carrot

    Directory of Open Access Journals (Sweden)

    M Naghipour zadeh mahani

    2016-04-01

    Full Text Available Introduction: Carrot is one of the most common vegetables used for human nutrition because of its high vitamin and fiber contents. Drying improves the product shelf life without addition of any chemical preservative and reduces both the size of package and the transport cost. Drying also aidsto reduce postharvest losses of fruits and vegetables especially, which can be as high as 70%. Dried carrots are used in dehydrated soups and in the form of powder in pastries and sauces. The main aim of drying agricultural products is decrease the moisture content to a level which allows safe storage over an extended period. Many fruits and vegetables can be sliced before drying.because of different tissue of a fruit or vegetable, cutting them in different direction and shape created different tissue slices. Due to drying is the exiting process of the moisture from internal tissue so different tissue slices caused different drying kinetics. Therefore, the study on effect of cutting parameters on drying is necessary. Materials and Methods: Carrots (Daucus carota L. were purchased from the local market (Kerman, Iran and stored in a refrigerator at 5°C. The initial moisture contents of the Carrot samples were determined by the oven drying method. The sample was dried in an oven at 105±2°C about 24 hours. The carrots cut by 3 models blade at 3 directions. The samples were dried in an oven at 70°C. Moisture content of the carrot slices were determined by weighting of samples during drying. Volume changes because of sample shrinkage were measured by a water displacement method. Rehydration experiment was performed by immersing a weighted amount of dried samples into hot water 50 °C for 30 min. In this study the effect of some cutting parameters was considered on carrot drying and the quality of final drying product. The tests were performed as a completely random design. The effects of carrot thickness at two levels (3 and 6 mm, blade in 3 models (flat blade

  10. Designing CAF-adjuvanted dry powder vaccines: spray drying preserves the adjuvant activity of CAF01.

    Science.gov (United States)

    Ingvarsson, Pall Thor; Schmidt, Signe Tandrup; Christensen, Dennis; Larsen, Niels Bent; Hinrichs, Wouter Leonardus Joseph; Andersen, Peter; Rantanen, Jukka; Nielsen, Hanne Mørck; Yang, Mingshi; Foged, Camilla

    2013-05-10

    Dry powder vaccine formulations are highly attractive due to improved storage stability and the possibility for particle engineering, as compared to liquid formulations. However, a prerequisite for formulating vaccines into dry formulations is that their physicochemical and adjuvant properties remain unchanged upon rehydration. Thus, we have identified and optimized the parameters of importance for the design of a spray dried powder formulation of the cationic liposomal adjuvant formulation 01 (CAF01) composed of dimethyldioctadecylammonium (DDA) bromide and trehalose 6,6'-dibehenate (TDB) via spray drying. The optimal excipient to stabilize CAF01 during spray drying and for the design of nanocomposite microparticles was identified among mannitol, lactose and trehalose. Trehalose and lactose were promising stabilizers with respect to preserving liposome size, as compared to mannitol. Trehalose and lactose were in the glassy state upon co-spray drying with the liposomes, whereas mannitol appeared crystalline, suggesting that the ability of the stabilizer to form a glassy matrix around the liposomes is one of the prerequisites for stabilization. Systematic studies on the effect of process parameters suggested that a fast drying rate is essential to avoid phase separation and lipid accumulation at the surface of the microparticles during spray drying. Finally, immunization studies in mice with CAF01 in combination with the tuberculosis antigen Ag85B-ESAT6-Rv2660c (H56) demonstrated that spray drying of CAF01 with trehalose under optimal processing conditions resulted in the preservation of the adjuvant activity in vivo. These data demonstrate the importance of liposome stabilization via optimization of formulation and processing conditions in the engineering of dry powder liposome formulations.

  11. Improved shelf life of dried Beauveria bassiana blastospores using convective drying and active packaging processes.

    Science.gov (United States)

    Mascarin, Gabriel Moura; Jackson, Mark A; Behle, Robert W; Kobori, Nilce N; Júnior, Ítalo Delalibera

    2016-10-01

    The yeast form (blastospore) of the dimorphic insect-pathogenic fungus Beauveria bassiana can be rapidly produced using liquid fermentation methods but is generally unable to survive rapid dehydration processes or storage under non-refrigerated conditions. In this study, we evaluated the influence of two convective drying methods, various modified atmosphere packaging systems, and storage temperatures on the desiccation tolerance, storage stability, and virulence of blastospores of B. bassiana ESALQ 1432. All blastospore formulations were dried to <5 % water content equivalent to aw < 0.3. The viability of B. bassiana blastospores after air drying and spray drying was greater than 80 %. Vacuum-packaged blastospores remained viable longer when stored at 4 °C compared with 28 °C with virtually no loss in viability over 9 months regardless the drying method. When both oxygen and moisture scavengers were added to sealed packages of dried blastospore formulations stored at 28 °C, viability was significantly prolonged for both air- and spray-dried blastospores. The addition of ascorbic acid during spray drying did not improve desiccation tolerance but enhanced cell stability (∼twofold higher half-life) when stored at 28 °C. After storage for 4 months at 28 °C, air-dried blastospores produced a lower LC80 and resulted in higher mortality to whitefly nymphs (Bemisia tabaci) when compared with spray-dried blastospores. These studies identified key storage conditions (low aw and oxygen availability) that improved blastospore storage stability at 28 °C and will facilitate the commercial development of blastospores-based bioinsecticides.

  12. Annotated Bibliography for Drying Nuclear Fuel

    Energy Technology Data Exchange (ETDEWEB)

    Rebecca E. Smith

    2011-09-01

    Internationally, the nuclear industry is represented by both commercial utilities and research institutions. Over the past two decades many of these entities have had to relocate inventories of spent nuclear fuel from underwater storage to dry storage. These efforts were primarily prompted by two factors: insufficient storage capacity (potentially precipitated by an open-ended nuclear fuel cycle) or deteriorating quality of existing underwater facilities. The intent of developing this bibliography is to assess what issues associated with fuel drying have been identified, to consider where concerns have been satisfactorily addressed, and to recommend where additional research would offer the most value to the commercial industry and the U. S. Department of Energy.

  13. Drying and rehydration of oyster mushroom

    OpenAIRE

    Giannini Pasiznick Apati; Sandra Aparecida Furlan; João Borges Laurindo

    2010-01-01

    Dehydration and rehydration processes of Pleurotus ostreatus fruiting bodies were investigated in this work. Mushroom samples were dehydrated at 40, 50 and 60 ºC, using drying air with relative humidity of 75 %. The rehydration was investigated at different temperatures of immersion water (25, 55 and 85 ºC) and different immersion times (30, 75 and 120 minutes). The best rehydration occurred for the samples dried at 40 ºC. The rehydration could be done in water at room temperature, during 30 ...

  14. Dry mouth: aging and oral health.

    Science.gov (United States)

    Navazesh, Mahvash

    2002-10-01

    Dry mouth is a common complaint among older adults, and the aging process is erroneously considered by many to be the primary cause. The subjective complaint of dry mouth (xerostomia) is not always associated with objective evidence of a reduced saliva flow rate (salivary gland hypofunction). Moreover, there are patients who have reduced saliva flow rates and are asymptomatic. Xerostomia and salivary gland hypofunction are associated with sundry oral and systemic complications and affect the quality of an individual's life. This article includes the common causes of xerostomia and salivary gland hypofunction and addresses the common complications of and routine therapeutic modalities available for these conditions in the elderly.

  15. 7 CFR 58.248 - Nonfat dry milk.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Nonfat dry milk. 58.248 Section 58.248 Agriculture... Products Bearing Usda Official Identification § 58.248 Nonfat dry milk. (a) Nonfat dry milk in commercial....S. Standard Grade. (b) Regular nonfat dry milk in consumer size packages which bears an official...

  16. Drying characteristics and quality of bananas under infrared radiation heating

    Science.gov (United States)

    Hot air (HA) drying of banana has low drying efficiency and results in undesirable product quality. The objectives of this research were to investigate the feasibility of infrared (IR) heating to improve banana drying rate, evaluate quality of the dried product, and establish models for predicting d...

  17. Thermal drying of the solid fraction from biogas digestate

    DEFF Research Database (Denmark)

    Pantelopoulos, Athanasios; Magid, Jakob; Jensen, Lars Stoumann

    2016-01-01

    Drying of solids produced from digestate is prone to N losses through NH3 volatilisation. The applicability of acidification as an NH3 emission mitigation technique during the drying of solids from digestate was assessed in a drying experiment. Operating conditions comprised four drying temperatu...

  18. Protein stabilisation and controlled particulate production by supercritical fluid drying

    NARCIS (Netherlands)

    Bouchard, A.M.J.L.

    2007-01-01

    Carbon dioxide was used as a drying medium for the preparation of micro-size powders from aqueous solutions in a high-pressure spray-drying process. This technology was shown to be an alternative to traditional drying processes that could be successfully used for the dry formulation of therapeutic

  19. Mathematical and computational modeling simulation of solar drying Systems

    Science.gov (United States)

    Mathematical modeling of solar drying systems has the primary aim of predicting the required drying time for a given commodity, dryer type, and environment. Both fundamental (Fickian diffusion) and semi-empirical drying models have been applied to the solar drying of a variety of agricultural commo...

  20. The influence of lysozyme on mannitol polymorphism in freeze-dried and spray-dried formulations depends on the selection of the drying process.

    Science.gov (United States)

    Grohganz, Holger; Lee, Yan-Ying; Rantanen, Jukka; Yang, Mingshi

    2013-04-15

    Freeze-drying and spray-drying are often applied drying techniques for biopharmaceutical formulations. The formation of different solid forms upon drying is often dependent on the complex interplay between excipient selection and process parameters. The purpose of this study was to investigate the influence of the chosen drying method on the solid state form. Mannitol-lysozyme solutions of 20mg/mL, with the amount of lysozyme varying between 2.5% and 50% (w/w) of total solid content, were freeze-dried and spray-dried, respectively. The resulting solid state of mannitol was analysed by near-infrared spectroscopy in combination with multivariate analysis and further, results were verified with X-ray powder diffraction. It was seen that the prevalence of the mannitol polymorphic form shifted from β-mannitol to δ-mannitol with increasing protein concentration in freeze-dried formulations. In spray-dried formulations an increase in protein concentration resulted in a shift from β-mannitol to α-mannitol. An increase in final drying temperature of the freeze-drying process towards the temperature of the spray-drying process did not lead to significant changes. It can thus be concluded that it is the drying process in itself, rather than the temperature, that leads to the observed solid state changes.

  1. Blanching, salting and sun drying of different pumpkin fruit slices

    OpenAIRE

    Workneh, T. S.; Zinash, A.; Woldetsadik, K.

    2012-01-01

    The study was aimed at assessing the quality of pumpkin (Cucuribita Spp.) slices that were subjected to pre-drying treatments and drying using two drying methods (uncontrolled sun and oven) fruit accessions. Pre-drying had significant (P ≤ 0.05) effect on the quality of dried pumpkin slices. 10 % salt solution dipped pumpkin fruit slices had good chemical quality. The two-way interaction between drying methods and pre-drying treatments had significant (P ≤ 0.05) effect on chemical qualities. ...

  2. Thin layer modelling of Gelidium sesquipedale solar drying process

    Energy Technology Data Exchange (ETDEWEB)

    Ait Mohamed, L. [Laboratoire d' Energie Solaire et des Plantes Aromatiques et Medicinales, Ecole Normale Superieure, BP 2400, Marrakech (Morocco); Faculte des Sciences Semlalia, BP 2390, Marrakech (Morocco); Ethmane Kane, C.S. [Faculte des Sciences de Tetouan, BP 2121, Tetouan (Morocco); Kouhila, M.; Jamali, A. [Laboratoire d' Energie Solaire et des Plantes Aromatiques et Medicinales, Ecole Normale Superieure, BP 2400, Marrakech (Morocco); Mahrouz, M. [Faculte des Sciences Semlalia, BP 2390, Marrakech (Morocco); Kechaou, N. [Ecole Nationale d' Ingenieurs de Sfax, BPW 3038 (Tunisia)

    2008-05-15

    The effect of air temperature and air flow rate on the drying kinetics of Gelidium sesquipedale was investigated in convective solar drying. Drying was conducted at 40, 50 and 60 C. The relative humidity was varied from 50% to 57%, and the drying air flow rate was varied from 0.0277 to 0.0833 m{sup 3}/s. The expression for the drying rate equation is determined empirically from the characteristic drying curve. Thirteen mathematical models of thin layer drying are selected in order to estimate the suitable model for describing the drying curves. The two term model gives the best prediction of the drying curves and satisfactorily describes the drying characteristics of G. sesquipedale with a correlation coefficient R of 0.9999 and chi-square ({chi}{sup 2}) of 3.381 x 10{sup -6}. (author)

  3. Drying effects on the antioxidant properties of tomatoes and ginger.

    Science.gov (United States)

    Gümüşay, Özlem Aktürk; Borazan, Alev Akpınar; Ercal, Nuran; Demirkol, Omca

    2015-04-15

    In this study, the effects of four different drying processes, sun drying (SD), oven drying (OD), vacuum oven drying (VOD) and freeze drying (FD) for tomatoes (Solanum lycopersicum) and ginger (Zingiber officinale) in terms of thiolic and phenolic contents have been studied. Thiol content, total phenolic content (TPC), ascorbic acid (AA) content, and cupric ion reducing antioxidant capacity (CUPRAC) were determined in fresh and dried samples. Glutathione (GSH) and cysteine (Cys) were determined as the thiol contents of tomatoes and ginger. Significant losses were observed in the contents of TPC, AA, GSH and Cys and CUPRAC values in all samples that were dried using the thermal method. There was a statistically significant difference in the losses of the TPC, AA, and thiol contents between the use of thermal drying and freeze drying (except Cys in tomatoes) methods. Freeze dried tomato and ginger samples have been found to have better antioxidant properties.

  4. Drying of peat and wood biomass. Literature review

    Energy Technology Data Exchange (ETDEWEB)

    Tapanainen, J. (Valtion Teknillinen Tutkimuskeskus, Espoo (Finland). Poltto- ja Voiteluainelaboratorio)

    1982-06-01

    Peat drying agrees with the typical drying curve of capillary porous materials, where a constant rate zone and a zone of decreasing rate of drying are distinguished. It depends on the way of water binding, how easily the moisure of pea can be removed. Wood is a hygroscopic porous material, and its drying can be described with the aid of diffusion theory. Milled peat is usually dried artificially in flash driers. Drum driers are also used for peat to some extent. The best known indirectly heated equipment is Peco-drier, where saturated steam and hot water are used as heat transfer media. A back-pressure drier developed in Sweden is also suitable for peat drying. In this equipment, indirect drying with back-pressure steam from the turbine is applied. Wood biomass (chips, bark) can be dried for example by hot-grinding, vibrating conveyor or drum drying methods. Cascade and pneumatic driers are also used for drying bark.

  5. Effect of drying method to antioxidants capacity of Limnophila aromatica

    Science.gov (United States)

    Yen, Tran Thi Ngoc; Vu, Nguyen Hoang

    2017-09-01

    Limnophila aromatica is widely used in South East Asian countries to make spices in food and medicine in traditional medicine. The use value of vegetables is known because some of the lesser constituents in plants are called antioxidants. These active ingredients have not been fully researched and their pharmacological effects are underestimated. In this study, the drying temperature at 40 °C was showed that the antioxidant activity decreased the most. The drying temperature of 50 °C is suitable for convection drying method and drying temperature of 60 °C suitable for vacuum drying, as it retains the most antioxidant properties. Regarding the drying method, freeze drying proved to be effective when retaining high antioxidant capacity. Using The convection drying at 50 °C and the vacuum drying at 60 °C, the antioxidant activity of Limnophila aromatica was not different. Over 6 weeks of preservation, the dried product has deterioration in antioxidant properties.

  6. Encapsulation of Alcohol Dehydrogenase in Mannitol by Spray Drying

    OpenAIRE

    Hirokazu Shiga; Hiromi Joreau; Tze Loon Neoh; Takeshi Furuta; Hidefumi Yoshii

    2014-01-01

    The retention of the enzyme activity of alcohol dehydrogenase (ADH) has been studied in various drying processes such as spray drying. The aim of this study is to encapsulate ADH in mannitol, either with or without additive in order to limit the thermal denaturation of the enzyme during the drying process. The retention of ADH activity was investigated at different drying temperatures. When mannitol was used, the encapsulated ADH was found inactive in all the dried powders. This is presumably...

  7. Impact of Drying Methods on Wettability of Populus tomentosa

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Plantation poplar is one of the most important resources for wood industry, its utilization field is vast. The wettability of Populus tomentosa with different drying methods was judged by measurement of contact angle using distilled water in this paper. The results showed that the specimens from conventional drying have the biggest contact angle, and the air dried have the smallest contact angle, air dried lumbers have a better wettability than the kiln dried. The changes of contact angle in a period of tim...

  8. Use of neural image analysis methods in the process to determine the dry matter content in the compost

    Science.gov (United States)

    Wojcieszak, D.; Przybył, J.; Lewicki, A.; Ludwiczak, A.; Przybylak, A.; Boniecki, P.; Koszela, K.; Zaborowicz, M.; Przybył, K.; Witaszek, K.

    2015-07-01

    The aim of this research was investigate the possibility of using methods of computer image analysis and artificial neural networks for to assess the amount of dry matter in the tested compost samples. The research lead to the conclusion that the neural image analysis may be a useful tool in determining the quantity of dry matter in the compost. Generated neural model may be the beginning of research into the use of neural image analysis assess the content of dry matter and other constituents of compost. The presented model RBF 19:19-2-1:1 characterized by test error 0.092189 may be more efficient.

  9. Drying Characteristics and Physical and Nutritional Properties of Shrimp Meat as Affected by Different Traditional Drying Techniques

    Science.gov (United States)

    Ofori, H.; Dziedzoave, N. T.; Kortei, N. K.

    2016-01-01

    The influence of different drying methods on physical and nutritional properties of shrimp meat was investigated in this study. Peeled shrimps were dried separately using an air-oven dryer and a tunnel solar dryer. The drying profile of shrimp meat was determined in the two drying systems by monitoring moisture loss over the drying period. Changes in color, proximate composition, and rehydration capacity were assessed. The rate of moisture removal during solar drying was faster than the air-oven drying. The development of red color during drying was comparable among the two methods, but solar-dried shrimps appeared darker (L⁎ = 47.4) than the air-oven-dried (L⁎ = 49.0). Chemical analysis indicated that protein and fat made up nearly 20% and 2% (wb) of the shrimp meat, respectively. Protein and ash content of shrimp meat dried under the two dryer types were comparable but fat was significantly (p < 0.05) higher in oven-dried meat (2.1%), compared to solar-dried meat (1.5%). Although rehydration behavior of shrimp from the two drying systems followed a similar pattern, solar-dried shrimp absorbed moisture more rapidly. The results have demonstrated that different approaches to drying may affect the physical and nutritional quality of shrimp meat differently. PMID:27034924

  10. Infrared pre-drying and dry-dehulling of walnuts for improved processing efficiency and product quality

    Science.gov (United States)

    The walnut industry is faced with an urgent need to improve post-harvest processing efficiency, particularly drying and dehulling operations. This research investigated the feasibility of dry-dehulling and infrared (IR) pre-drying of walnuts for improved processing efficiency and dried product quali...

  11. Drying Characteristics and Physical and Nutritional Properties of Shrimp Meat as Affected by Different Traditional Drying Techniques

    Directory of Open Access Journals (Sweden)

    P. T. Akonor

    2016-01-01

    Full Text Available The influence of different drying methods on physical and nutritional properties of shrimp meat was investigated in this study. Peeled shrimps were dried separately using an air-oven dryer and a tunnel solar dryer. The drying profile of shrimp meat was determined in the two drying systems by monitoring moisture loss over the drying period. Changes in color, proximate composition, and rehydration capacity were assessed. The rate of moisture removal during solar drying was faster than the air-oven drying. The development of red color during drying was comparable among the two methods, but solar-dried shrimps appeared darker (L⁎=47.4 than the air-oven-dried (L⁎=49.0. Chemical analysis indicated that protein and fat made up nearly 20% and 2% (wb of the shrimp meat, respectively. Protein and ash content of shrimp meat dried under the two dryer types were comparable but fat was significantly (p<0.05 higher in oven-dried meat (2.1%, compared to solar-dried meat (1.5%. Although rehydration behavior of shrimp from the two drying systems followed a similar pattern, solar-dried shrimp absorbed moisture more rapidly. The results have demonstrated that different approaches to drying may affect the physical and nutritional quality of shrimp meat differently.

  12. Drying Characteristics and Physical and Nutritional Properties of Shrimp Meat as Affected by Different Traditional Drying Techniques.

    Science.gov (United States)

    Akonor, P T; Ofori, H; Dziedzoave, N T; Kortei, N K

    2016-01-01

    The influence of different drying methods on physical and nutritional properties of shrimp meat was investigated in this study. Peeled shrimps were dried separately using an air-oven dryer and a tunnel solar dryer. The drying profile of shrimp meat was determined in the two drying systems by monitoring moisture loss over the drying period. Changes in color, proximate composition, and rehydration capacity were assessed. The rate of moisture removal during solar drying was faster than the air-oven drying. The development of red color during drying was comparable among the two methods, but solar-dried shrimps appeared darker (L (⁎) = 47.4) than the air-oven-dried (L (⁎) = 49.0). Chemical analysis indicated that protein and fat made up nearly 20% and 2% (wb) of the shrimp meat, respectively. Protein and ash content of shrimp meat dried under the two dryer types were comparable but fat was significantly (p dried meat (2.1%), compared to solar-dried meat (1.5%). Although rehydration behavior of shrimp from the two drying systems followed a similar pattern, solar-dried shrimp absorbed moisture more rapidly. The results have demonstrated that different approaches to drying may affect the physical and nutritional quality of shrimp meat differently.

  13. Microprestress-Solidification Theory for Concrete Creep. I: Aging and Drying Effects

    DEFF Research Database (Denmark)

    Bazant, Z.P.; Hauggaard-Nielsen, Anders Boe; Baweja, S.

    1997-01-01

    model is caused by relaxation of the tensile microprestress transverse to the slip plane. The Pickett effect (drying effect) is caused by changes of the microprestress balancing the changes in the disjoining pressure, which in turn are engendered by changes of the relative humidity in the capillary...... microprestress carried by the bonds and bridges crossing the micropores (gel pores) in the hardened cement gel. The microprestress is generated by the disjoining pressure of the hindered adsorbed water in the micropores and by very large and highly localized volume changes caused by hydration or drying. The long...

  14. Effect of heat source on the growth of dendritic drying patterns

    Indian Academy of Sciences (India)

    Kiran M Kolwankar; Pulkit Prakash; Shruthi Radhakrishnan; Swadhini Sahu; Aditya K Dharmadhikari; Jayashree A Dharmadhikari; Deepak Mathur

    2015-03-01

    Shining a tightly-focussed but low-powered laser beam on an absorber dispersed in a biological fluid gives rise to spectacular growth of dendritic patterns. These result from localized drying of the fluid because of efficient absorption and conduction of optical energy by the absorber. We have carried out experiments in several biologically relevant fluids and have analysed patterns generated by different types of absorbers. We observe that the growth velocity of branches in the dendritic patterns can decrease below the value expected for natural drying.

  15. Degradation of LIM domain-binding protein three during processing of Spanish dry-cured ham

    OpenAIRE

    2014-01-01

    Extensive proteolysis takes place during the processing of dry-cured ham due to the action of muscle peptidases. The aim of this work was to study the degradation of LIM domain binding protein 3 (LDB3), which is located at the Z-lines of the sarcomere, at different times during the Spanish dry-cured ham processing (2, 3.5, 5, 6.5, and 9 months). A total of 107 peptides have been identified by mass spectrometry, most of them generated from the first region of the protein sequence (position 1-9...

  16. Study on vitamin D₂ stability in dried mushrooms during drying and storage.

    Science.gov (United States)

    Sławińska, Aneta; Fornal, Emilia; Radzki, Wojciech; Skrzypczak, Katarzyna; Zalewska-Korona, Marta; Michalak-Majewska, Monika; Parfieniuk, Ewa; Stachniuk, Anna

    2016-05-15

    The main objective of this work was to determine the stability of vitamin D2 in dried mushrooms Agaricus bisporus, Pleurotus ostreatus and Lentinula edodes during storage, as well as to examine the possibility of inducing vitamin D2 production in dried mushrooms by UVB irradiation. After 1.5 year storage of dried mushrooms, the level of vitamin D2 in button mushrooms was found to be 6.90 μg/g dw, which is a 48.32% of initial level of vitamin D2. In the case of dried oyster and shiitake mushrooms there was a decrease to the level of 66.90% and 68.40%, respectively. It was determined that dried mushrooms can produce ergocalciferol under UVB irradiation. The highest content of vitamin D2 was observed in A. bisporus. Freeze-dried A. bisporus contained from 42.08 to 119.21 μg/g dw and hot-air dried mushrooms contained from 21.51 to 81.17 μg/g dw vitamin D2.

  17. Drying Mechanisms in Plasticized Latex Films: Role of Horizontal Drying Fronts.

    Science.gov (United States)

    Divry, V; Gromer, A; Nassar, M; Lambour, C; Collin, D; Holl, Y

    2016-07-14

    This article presents studies on the drying kinetics of latexes with particles made progressively softer by adding increasing amounts of a plasticizer, in relation to speeds of horizontal drying fronts and particle deformation mechanisms. Global drying rates were measured by gravimetry, and speeds of the horizontal fronts were recorded using a video camera and image processing. Particle deformation mechanisms were inferred using the deformation map established by Routh and Russel (RR). This required precise measurements of the rheological properties of the polymers using a piezorheometer. The results show that latexes with softer particles dry slowly, but in our systems, this is not due to skin formation. A correlation between global drying rates and speeds of horizontal fronts could be established and interpreted in terms of the evolution of mass transfer coefficients of water in different areas of the drying system. The speeds of the horizontal drying fronts were compared with the RR model. A remarkable qualitative agreement of the curve shapes was observed; however, the fit could not be considered good. These results call for further research efforts in modeling and simulation.

  18. Experimental study on drying kinetic of cassava starch in a pneumatic drying system

    Science.gov (United States)

    Suherman, Kumoro, Andri Cahyo; Kusworo, Tutuk Djoko

    2015-12-01

    The aims of this study are to present the experimental research on the drying of cassava starch in a pneumatic dryer, to describe its drying curves, as well as to calculate its thermal efficiency. The effects of operating conditions, namely the inlet air temperature (60-100 °C) and solid-gas flow rate ratio (Ms/Mg 0.1-0.3) were studied. Heat transfer is accomplished through convection mechanism in a drying chamber based on the principle of direct contact between the heated air and the moist material. During the drying process, intensive heat and mass transfer between the drying air and the cassava starch take place. In order to meet the SNI standards on solid water content, the drying process was done in two cycles. The higher the temperature of the drying air, the lower the water content of the solids exiting the dryer. Thermal efficiency of the 2nd cycle was found to be lower than the 1st cycle.

  19. 49 CFR 230.62 - Dry pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Dry pipe. 230.62 Section 230.62 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS Boilers and Appurtenances Steam Pipes §...

  20. Dry period length of dairy cows :

    NARCIS (Netherlands)

    Vries, de Ruben

    2017-01-01

    A dry period of dairy cows is historically seen as a period during which the cow can restore its body condition and regenerate its mammary epithelium in order to be high yielding in the successive lactation. Recent work has indicated that high yielding cows generally experience a severe negative ene

  1. RECLAIMING FIBER FROM NEWSPRINT BY DRY METHODS

    Science.gov (United States)

    Economical and environmental considerations suggest the desirability of recycling old newspapers to newsprint in urban areas, using methods with reduced demand for process water. In bench-scale experiments, we successfully dry-fiberized old newspapers at moisture contents from 2...

  2. Improved Food Drying and Storage Training Manual.

    Science.gov (United States)

    Zweig, Peter R.; And Others

    This manual is intended to serve as a guide for those who are helping future Peace Corps volunteers to acquire basic food drying and storage skills. Included in the guide are lesson outlines and handouts for use in each of the 30 sessions of the course. Representative topics discussed in the individual sessions are scheduling, solar dryers,…

  3. Consumer Acceptance of Dry Dog Food Variations

    Science.gov (United States)

    Donfrancesco, Brizio Di; Koppel, Kadri; Swaney-Stueve, Marianne; Chambers, Edgar

    2014-01-01

    Simple Summary The objectives of this study were to compare the acceptance of different dry dog food products by consumers, determine consumer clusters for acceptance, and identify the characteristics of dog food that drive consumer acceptance. Pet owners evaluated dry dog food samples available in the US market. The results indicated that appearance of the sample, especially the color, influenced pet owner’s overall liking more than the aroma of the product. Abstract The objectives of this study were to compare the acceptance of different dry dog food products by consumers, determine consumer clusters for acceptance, and identify the characteristics of dog food that drive consumer acceptance. Eight dry dog food samples available in the US market were evaluated by pet owners. In this study, consumers evaluated overall liking, aroma, and appearance liking of the products. Consumers were also asked to predict their purchase intent, their dog’s liking, and cost of the samples. The results indicated that appearance of the sample, especially the color, influenced pet owner’s overall liking more than the aroma of the product. Overall liking clusters were not related to income, age, gender, or education, indicating that general consumer demographics do not appear to play a main role in individual consumer acceptance of dog food products. PMID:26480043

  4. Bioethanol production from dried sweet sorghum stalk

    Energy Technology Data Exchange (ETDEWEB)

    Almodares, A.; Etemadifar, Z.; Ghoreishi, F.; Yosefi, F. [Biology Dept. Univ. of Isfahan, Isfahan (Iran, Islamic Republic of)], e-mail: aalmodares@yahoo.com

    2012-11-01

    Bioethanol as a renewable transportation fuel has a great potential for energy and clean environment. Among crops sweet sorghum is one of the best feedstock for ethanol production under hot and dry climatic conditions. Because it has higher tolerance to salt and drought comparing to sugarcane and corn that are currently used for bio-fuel production in the world. Generally mills are used to extract the juice from sweet sorghum stalks. Three roller mills extract around nearly 50 percent of the juice and more mills is needed to extract higher percentage of the juice. More over under cold weather the stalks become dry and juice is not extracted from the stalk, therefore reduce harvesting period. In this study stalks were harvested, leaves were stripped from the stalks and the stalks were chopped to nearly 4 mm length and sun dried. The dry stalks were grounded to 60 mesh powder by a mill. Fermentation medium consists of 15-35% (w/w) sweet sorghum powder, micronutrients and active yeast inoculum from 0.5-1% (w/w) by submerge fermentation method. The fermentation time and temperature were 48-72 hours and 30 deg, respectively. The results showed the highest amount of ethanol (14.5 % w/w sorghum) was produced with 10% sweet sorghum powder and 1% of yeast inoculum, three day fermentation at 30 deg.

  5. New atomization nozzle for spray drying

    NARCIS (Netherlands)

    Deventer, H.C. van; Houben, R.J.; Koldeweij, R.B.J.

    2013-01-01

    A new atomization nozzle based on ink jet technology is introduced for spray drying. Application areas are the food and dairy industry, in the first instance, because in these industries the quality demands on the final powders are high with respect to heat load, powder shape, and size distribution.

  6. Drying and Rehydration of Calcium Alginate Gels

    NARCIS (Netherlands)

    Vreeker, R.; Li, L.; Fang, Y.; Appelqvist, I.; Mendes, E.

    2008-01-01

    In this paper, we study the rehydration properties of air-dried calcium alginate gel beads. Rehydration is shown to depend on alginate source (i.e. mannuronic to guluronic acid ratio) and the salt concentration in the rehydration medium. Rehydration curves are described adequately by the empirical W

  7. Drier for air-drying coatings

    NARCIS (Netherlands)

    Micciche, F.; Oostveen, E.A.; Linde, van der R.; Haveren, van J.

    2003-01-01

    The invention pertains to a drier composition for air-drying alkyd-based coatings, inks, or floor coverings, comprising a combination of the following components: a) a transition metal salt with the formula: (Me )( X )m in which Me is the transition metal; X represents a coordinating ligand; and k-

  8. Dry Well Storage Facility conceptual design study

    Energy Technology Data Exchange (ETDEWEB)

    1979-02-01

    The Dry Well Storage Facility described is assumed to be located adjacent to or near a Spent Fuel Receiving and Packaging Facility and/or a Packaged Fuel Transfer Facility. Performance requirements, quality levels and codes and standards, schedule and methods of performance, special requirements, quality assurance program, and cost estimate are discussed. Appendices on major mechanical equipment and electric power requirements are included.

  9. [Dry eye syndrome and the PC screen].

    Science.gov (United States)

    Moldovan, Iulia; Stan, Cristina; Marc, Alexandra

    2013-01-01

    To study the correlation between PC screen exposure of over 8 hours and Dry Eye Syndrome in 18-25 years-old students. This is a cross-sectional, cohort clinical study, carried out in March 2012 - February 2013. All subjects completed a questionnaire, underwent a slit lamp examination and measurement of visual acuity. Among the 59 participants of this study, 26 were EXPOSED (> 8 hours of PC screen exposure = EXPOSED) and 33 were NONEXPOSED. The 18-25 - year old participants who were exposed over 8 hours to the PC screen had a relative risk of 5,5 to develop Dry Eye Syndrome, compared to NONEXPOSED participants. Results indicate that Dry Eye Syndrome incidence and intensity of symptoms had increased proportionally with the hours of exposure. Tear Film Breakup Time, the Ocular Protection Index and the PC Ocular Protection Index decreased with the hours of PC screen exposure, suggesting a behavioral change in the EXPOSED participants. Exposure of over 8 hours to the PC screen caused Dry Eye Syndrome in 18-25 - year old students, with a relative risk of 5,5.

  10. Dry calibration of ultrasonic gas flow meters

    Energy Technology Data Exchange (ETDEWEB)

    De Boer, G.; Lansing, J.

    1997-07-01

    At present in most European countries it is customary that turbine meters, or the newer ultrasonic gas flow meters, when used in fiscal metering or custody transfer metering applications, are calibrated in a test facility by comparison to standards or reference devices. For reason of practical and operational drawbacks, costs involved and availability of only a limited number of calibration facilities, another way of meter verification is advantageous. For orifice metering the practice of dry calibration is well established; that is, meter verification is based upon examination of the geometry and installation of the orifice plate and a function check of the read out devices. Although for turbine meters a flow (wet) calibration may be a necessity, it will be shown that ultrasonic gas flow meters can be dry calibrated in the same way as orifice meters. As a basis for the acceptance of a dry calibration procedure for ultrasonic gas flow meters, a sensitivity analysis of the relevant variables with respect to the meter's accuracy is presented. Further test results are presented that demonstrate the feasibility of the concept of dry calibration applied to ultrasonic gas flow meters. (author)

  11. Dry Electrodes Facilitate Remote Health Monitoring

    Science.gov (United States)

    2013-01-01

    Johnson Space Center collaborated with Blacksburg, Virginia-based NanoSonic Inc. through the SBIR program to devise a sensor to replace the traditional electrodes used for an electrocardiogram in space. In 2011, NanoSonic started marketing the dry electrodes as well as an EKGear Sensor Shirt, which is being considered for use in hospital garments, athletic apparel, and dive suits.

  12. Photoresponsive liquid marbles and dry water.

    Science.gov (United States)

    Tan, Tristan Tsai Yuan; Ahsan, Aniq; Reithofer, Michael R; Tay, Siok Wei; Tan, Sze Yu; Hor, Tzi Sum Andy; Chin, Jia Min; Chew, Benny Kia Jia; Wang, Xiaobai

    2014-04-01

    Stimuli-responsive liquid marbles for controlled release typically rely on organic moieties that require lengthy syntheses. We report herein a facile, one-step synthesis of hydrophobic and oleophobic TiO2 nanoparticles that display photoresponsive wettability. Water liquid marbles stabilized by these photoresponsive TiO2 particles were found to be stable when shielded from ultraviolet (UV) radiation; however, they quickly collapsed after being irradiated with 302 nm UV light. Oil- and organic-solvent-based liquid marbles could also be fabricated using oleophobic TiO2 nanoparticles and show similar UV-induced collapse. Finally, we demonstrated the formation of the micronized form of water liquid marbles, also known as dry water, by homogenization of the TiO2 nanoparticles with water. The TiO2 dry water displayed a similar photoresponse, whereby the micronized liquid marbles collapsed after irradiation and the dry water turned from a free-flowing powder to a paste. Hence, by exploiting the photoresponsive wettability of TiO2, we fabricated liquid marbles and dry water that display photoresponse and studied the conditions required for their collapse.

  13. Hot-dry-rock geothermal resource 1980

    Energy Technology Data Exchange (ETDEWEB)

    Heiken, G.; Goff, F.; Cremer, G. (ed.)

    1982-04-01

    The work performed on hot dry rock (HDR) geothermal resource evaluation, site characterization, and geophysical exploration techniques is summarized. The work was done by region (Far West, Pacific Northwest, Southwest, Rocky Mountain States, Midcontinent, and Eastern) and limited to the conterminous US.

  14. Hot-dry-rock geothermal resource 1980

    Energy Technology Data Exchange (ETDEWEB)

    Heiken, G.; Goff, F.; Cremer, G. (ed.)

    1982-04-01

    The work performed on hot dry rock (HDR) geothermal resource evaluation, site characterization, and geophysical exploration techniques is summarized. The work was done by region (Far West, Pacific Northwest, Southwest, Rocky Mountain States, Midcontinent, and Eastern) and limited to the conterminous US.

  15. DRY DEPOSITION OF POLLUTANTS TO FORESTS

    Science.gov (United States)

    We report on the results of an extensive field campaign to measure dry deposition of ozone and sulfur dioxide to a sample of forest types in the United States. Measurements were made for full growing seasons over a deciduous forest in Pennsylvania and a mixed deciduous-conifer...

  16. Sperm Preservation using Freeze-Drying Method

    Directory of Open Access Journals (Sweden)

    TAKDIR SAILI

    2005-03-01

    Full Text Available Since the discovery of cryopreservation method for bull semen, cryopreservation become an alternative method for maintaining gamet resources of certain animal which is threatened or near extinction. This technology was then applied to the preservation of embryo, oocyte, ovary and testis. The application of intracytoplasmic sperm injection (ICSI for which sperm motility is unnecessary had supported the effort to create simplified method such as freeze-drying for sperm preservation. Due to the benefit of ICSI over the conventional in vitro fertilization (IVF the spermatozoon could be mechanically driven to pass through the zona pellucida and entering the cytoplasm of oocytes prior to fertilization. The freeze-drying method is an alternative method in sperm preservation which ignored the motility of sperm. The sperm resulted from this technique is in drying state, therefore, it might be stored in room temperature or in refrigerator. Many reports have claimed that freeze-dried sperm which is not motile but has an intact DNA was able to fertilize oocytes, even produced offspring in mouse.

  17. New atomization nozzle for spray drying

    NARCIS (Netherlands)

    Deventer, H.C. van; Houben, R.J.; Koldeweij, R.B.J.

    2013-01-01

    A new atomization nozzle based on ink jet technology is introduced for spray drying. Application areas are the food and dairy industry, in the first instance, because in these industries the quality demands on the final powders are high with respect to heat load, powder shape, and size distribution.

  18. Drying and shrinkage of polymer gels

    Directory of Open Access Journals (Sweden)

    S. S. Waje

    2005-06-01

    Full Text Available The polymer hydrogel was synthesized by photo-polymerization process (UV light, 60 ºC in presence of Photo-initiator (IrgacureR and Cross-linker (NN'-methylene bisacrylamide; MBAM. In the present work, the drying of polymer hydrogel was carried out to study the effect of temperature, gel-sheet thickness, monomer ratio of acryl acid to acrylamide (AA/AM, concentration of MBAM and quantity of monomers. A correlation has been developed for modified sheet thickness as a function of contraction coefficient and degree of drying. Effective diffusivity was estimated from Fickian-diffusive model considering modified sheet thickness and was found to be in the range of 1.1 ´ 10-10-5.93 ´ 10-10 m²/s. The activation energy obtained using Arrhenius type equation was found to be in the range of 2979-10737 kJ/kmol H2O. The drying behavior shows an initial shoot-up in drying rate followed by constant rate and two falling rate periods.

  19. Dry period length of dairy cows

    NARCIS (Netherlands)

    Vries, de Ruben

    2017-01-01

    A dry period of dairy cows is historically seen as a period during which the cow can restore its body condition and regenerate its mammary epithelium in order to be high yielding in the successive lactation. Recent work has indicated that high yielding cows generally experience a severe negative

  20. Biogeochemical stoichiometry of Antarctic Dry Valley ecosystems

    Science.gov (United States)

    Barrett, J. E.; Virginia, R. A.; Lyons, W. B.; McKnight, D. M.; Priscu, J. C.; Doran, P. T.; Fountain, A. G.; Wall, D. H.; Moorhead, D. L.

    2007-03-01

    Among aquatic and terrestrial landscapes of the McMurdo Dry Valleys, Antarctica, ecosystem stoichiometry ranges from values near the Redfield ratios for C:N:P to nutrient concentrations in proportions far above or below ratios necessary to support balanced microbial growth. This polar desert provides an opportunity to evaluate stoichiometric approaches to understand nutrient cycling in an ecosystem where biological diversity and activity are low, and controls over the movement and mass balances of nutrients operate over 10-106 years. The simple organisms (microbial and metazoan) comprising dry valley foodwebs adhere to strict biochemical requirements in the composition of their biomass, and when activated by availability of liquid water, they influence the chemical composition of their environment according to these ratios. Nitrogen and phosphorus varied significantly in terrestrial and aquatic ecosystems occurring on landscape surfaces across a wide range of exposure ages, indicating strong influences of landscape development and geochemistry on nutrient availability. Biota control the elemental ratio of stream waters, while geochemical stoichiometry (e.g., weathering, atmospheric deposition) evidently limits the distribution of soil invertebrates. We present a conceptual model describing transformations across dry valley landscapes facilitated by exchanges of liquid water and biotic processing of dissolved nutrients. We conclude that contemporary ecosystem stoichiometry of Antarctic Dry Valley soils, glaciers, streams, and lakes results from a combination of extant biological processes superimposed on a legacy of landscape processes and previous climates.

  1. "Dry-column" chromatography of plant pigments

    Science.gov (United States)

    Woeller, F. H.; Lehwalt, M. F.; Oyama, V. I.

    1973-01-01

    Separation of plant pigments which can be accomplished on thin-layer silica plates with mixture of petroleum ether, halocarbon, acetone, and polar solvent can be readily translated into dry-column technique that yields reproducible chromatograms after elution in fashion of liquid chromatography with fluorimeter as detector. Best solvent system was found to be mixture of petroleum ether, dichloromethane, acetone, and ethyl acetate.

  2. Catalytic gasification of dry and wet biomass

    NARCIS (Netherlands)

    van Rossum, G.; Potic, B.; Kersten, Sascha R.A.; van Swaaij, Willibrordus Petrus Maria

    2009-01-01

    Catalytic gasification of dry biomass and of wet biomass streams in hot compressed water are reviewed and discussed as potential technologies for the production of synthesis gas, hydrogen- and methane-rich gas. Next to literature data also new experimental results from our laboratory on catalytic

  3. Dry powder inhalers for pulmonary drug delivery

    NARCIS (Netherlands)

    Frijlink, H.W.; De Boer, A.H.

    2004-01-01

    The pulmonary route is an interesting route for drug administration, both for effective local therapy (asthma, chronic obstructive pulmonary disease or cystic fibrosis) and for the systemic administration of drugs (e.g., peptides and proteins). Well-designed dry powder inhalers are highly efficient

  4. Methods for dry etching semiconductor devices

    Energy Technology Data Exchange (ETDEWEB)

    Bauer, Todd; Gross, Andrew John; Clews, Peggy J.; Olsson, Roy H.

    2016-11-01

    The present invention provides methods for etching semiconductor devices, such aluminum nitride resonators. The methods herein allow for devices having improved etch profiles, such that nearly vertical sidewalls can be obtained. In some examples, the method employs a dry etch step with a primary etchant gas that omits BCl.sub.3, a common additive.

  5. Drying and Rehydration of Calcium Alginate Gels

    NARCIS (Netherlands)

    Vreeker, R.; Li, L.; Fang, Y.; Appelqvist, I.; Mendes, E.

    2008-01-01

    In this paper, we study the rehydration properties of air-dried calcium alginate gel beads. Rehydration is shown to depend on alginate source (i.e. mannuronic to guluronic acid ratio) and the salt concentration in the rehydration medium. Rehydration curves are described adequately by the empirical

  6. ‘Liberty’ Dry-Fleshed Sweetpotato

    Science.gov (United States)

    The sweetpotato [Ipomoea batatas (L.) Lam.] cultivar, ‘Liberty’ was jointly developed by the U.S. Department of Agriculture (USDA), Agricultural Research Service (ARS), and Clemson University, South Carolina Agriculture and Forestry Research System. This cultivar is a dry-fleshed type with attracti...

  7. A dry electrode for EEG recording.

    Science.gov (United States)

    Taheri, B A; Knight, R T; Smith, R L

    1994-05-01

    This paper describes the design, fabrication and testing of a prototype dry surface electrode for EEG signal recording. The new dry electrode has the advantages of no need for skin preparation or conductive paste, potential for reduced sensitivity to motion artifacts and an enhanced signal-to-noise ratio. The electrode's sensing element is a 3 mm stainless steel disk which has a 2000 A (200 nm) thick nitride coating deposited onto one side. The back side of the disk is attached to an impedance converting amplifier. The prototype electrode was mounted on a copper plate attached to the scalp by a Velcro strap. The performance of this prototype dry electrode was compared to commercially available wet electrodes in 3 areas of electroencephalogram (EEG) recording: (1) spontaneous EEG, (2) sensory evoked potentials, and (3) cognitive evoked potentials. In addition to the raw EEG, the power spectra of the signals from both types of electrodes were also recorded. The results suggest that the dry electrode performs comparably to conventional electrodes for all types of EEG signal analysis. This new electrode may be useful for the production of high resolution surface maps of brain activity where a large number of electrodes or prolonged recording times are required.

  8. Dry eye syndrome among computer users

    Science.gov (United States)

    Gajta, Aurora; Turkoanje, Daniela; Malaescu, Iosif; Marin, Catalin-Nicolae; Koos, Marie-Jeanne; Jelicic, Biljana; Milutinovic, Vuk

    2015-12-01

    Dry eye syndrome is characterized by eye irritation due to changes of the tear film. Symptoms include itching, foreign body sensations, mucous discharge and transitory vision blurring. Less occurring symptoms include photophobia and eye tiredness. Aim of the work was to determine the quality of the tear film and ocular dryness potential risk in persons who spend more than 8 hours using computers and possible correlations between severity of symptoms (dry eyes symptoms anamnesis) and clinical signs assessed by: Schirmer test I, TBUT (Tears break-up time), TFT (Tear ferning test). The results show that subjects using computer have significantly shorter TBUT (less than 5 s for 56 % of subjects and less than 10 s for 37 % of subjects), TFT type II/III in 50 % of subjects and type III 31% of subjects was found when compared to computer non users (TFT type I and II was present in 85,71% of subjects). Visual display terminal use, more than 8 hours daily, has been identified as a significant risk factor for dry eye. It's been advised to all persons who spend substantial time using computers to use artificial tears drops in order to minimize the symptoms of dry eyes syndrome and prevents serious complications.

  9. Determination of the most economical drying schedule and air velocity in softwood drying

    Energy Technology Data Exchange (ETDEWEB)

    Salin, J.G.

    2001-12-01

    Simulation models for conventional softwood drying have been available and have also been used by kiln operators for many years. For instance models for Scots pine and Norway spruce, dried at temperatures below about 80 deg C, are in use in Sweden, Finland and Norway. These models predict drying rates as a function of climate (schedule) and air velocity. The models thus give a direct basis for calculation of instantaneous energy demand for moisture evaporation and ventilation. There is further a direct relationship between the air velocity in the space between the board layers in the kiln stack and the electrical power demand by the circulation fans. Finally, the smaller energy consumption associated with heat losses through kiln walls and the accumulated heat in timber etc. can be estimated with sufficient accuracy. Instantaneous energy costs can thus be calculated for each part of a drying schedule. Capital costs associated with kiln investment and maintenance, personnel, insurance etc can be accounted for as an hourly cost, which is basically independent of whether timber is dried fast or slowly. A slow drying process thus accumulates more capital costs per m 3 timber. In this way it is possible to calculate the total instantaneous drying cost (Euro/m{sup 3}/h or Euro/m3/MC%) and the overall total cost (Euro or Euro/m{sup 3}). Some results obtained with a simulation model equipped with such a cost calculation are presented in the paper. A rapidly increasing drying cost is seen when the final MC is lowered. By minimising the instantaneous cost, an optimal drying schedule can be determined for a given fixed air velocity. Finally an optimal air velocity - constant or varying - can be found in the same way.

  10. Drying kinetics and mathematical modeling of hot air drying of coconut coir pith.

    Science.gov (United States)

    Fernando, J A K M; Amarasinghe, A D U S

    2016-01-01

    Drying kinetics of coir pith was studied and the properties of compressed coir pith discs were analyzed. Coir pith particles were oven dried in the range of temperatures from 100 to 240 °C and the rehydration ability of compressed coir pith was evaluated by finding the volume expansion. The optimum drying temperature was found to be 140 °C. Hot air drying was carried out to examine the drying kinetics by allowing the coir pith particles to fluidize and circulate inside the drying chamber. Particle motion within the drying chamber closely resembled the particle motion in a flash dryer. The effective moisture diffusivity was found to increase from 1.18 × 10(-8) to 1.37 × 10(-8) m(2)/s with the increase of air velocity from 1.4 to 2.5 m/s respectively. Correlation analysis and residual plots were used to determine the adequacy of existing mathematical models for describing the drying behavior of coir pith. The empirical models, Wang and Singh model and Linear model, were found to be adequate for accurate prediction of drying behavior of coir pith. A new model was proposed by modifying the Wang and Singh model and considering the effect of air velocity. It gave the best correlation between observed and predicted moisture ratio with high value of coefficient of determination (R(2)) and lower values of root mean square error, reduced Chi square (χ(2)) and mean relative deviation (E%).

  11. Evaluation of drying methods with respect to drying parameters, some nutritional and colour characteristics of peppermint (Mentha x piperita L.)

    Energy Technology Data Exchange (ETDEWEB)

    Arslan, Derya; Oezcan, M. Musa [Selcuk University, Faculty of Agriculture, Department of Food Engineering, Konya (Turkey); Menges, Hakan Okyay [Selcuk University, Faculty of Agriculture, Department of Farm Machinery, Konya (Turkey)

    2010-12-15

    Peppermint leaves (Mentha x piperita L.) were dried by using sun, oven (50 C) and microwave oven (700 W) drying methods. Page, Modified page, Midilli and Kuecuek models adequately described the oven, sun and microwave oven drying behaviours of peppermint leaves. The drying process was explicated through the diffusional model in order to obtain effective diffusivity values, which were determined as 3.10 x 10{sup -12}, 2.68 x 10{sup -12} and 4.09 x 10{sup -10} for the sun, oven and microwave oven drying process, respectively. Fresh and dried herbs had high amounts of K, Ca, P, Mg, Fe and Al minerals. Microwave oven drying method leaded to the lowest increase in Ag, Al, B, Na, Mn, Mg and Zn values than the other drying methods. Microwave oven drying shortened the drying time, revealed the highest phenolic content and optimum colour values. (author)

  12. The Effects of Drying Methods, Packaging Atmosphere and Storage Time on Dried Pomegranate Aril Quality

    OpenAIRE

    GÖLÜKCÜ, Muharrem

    2015-01-01

    The aim of this work was to evaluate the effects of drying methods, packaging atmosphere, and storage time in preserving the quality of dried pomegranate aril on total phenolic matter, total anthocyanin, antioxidant activity, and CIE L, a*, b*, C, h colour values. The highest contents of phenolic matter (5580 mg kg-1), anthocyanin (679.76 mg kg-1), antioxidant capacity (IC50, 26.16 mg g-1) and CIE a* colour value (10.73) were observed in freeze dried sample, followed by vacuum, convective, an...

  13. Devices and methods for generating an aerosol

    KAUST Repository

    Bisetti, Fabrizio

    2016-03-03

    Aerosol generators and methods of generating aerosols are provided. The aerosol can be generated at a stagnation interface between a hot, wet stream and a cold, dry stream. The aerosol has the benefit that the properties of the aerosol can be precisely controlled. The stagnation interface can be generated, for example, by the opposed flow of the hot stream and the cold stream. The aerosol generator and the aerosol generation methods are capable of producing aerosols with precise particle sizes and a narrow size distribution. The properties of the aerosol can be controlled by controlling one or more of the stream temperatures, the saturation level of the hot stream, and the flow times of the streams.

  14. Dry deposition of large, airborne particles onto a surrogate surface

    Science.gov (United States)

    Kim, Eugene; Kalman, David; Larson, Timothy

    Simultaneous measurements of particle dry deposition flux and airborne number concentration in the open atmosphere were made using three different types of artificially generated particles in the size range 10-100 μm - perlite, diatomaceous earth and glass beads. A combination of gravimetric analysis, automated microscopy and sonic anemometry provided size-resolved estimates of both the inertial and gravitational components of the quasi-laminar layer particle deposition velocity, ( Vd) b, as a function of size. Eddy inertial deposition efficiency ( ηdI) was determined as a function of dimensionless eddy Stokes number (Stk e). In the range 3PNL-SA-6721, Pacific Northwest Laboratories, Richland, WA), used in several regulatory models, significantly under-predicted (up to seven times) ( Vd) b for large particles ( da>10 μm).

  15. Design and evaluation of a new dry powder inhaler

    Directory of Open Access Journals (Sweden)

    "Rouholamini Najafabadi AH

    2001-08-01

    Full Text Available Three versions of a new dry powder inhaler (DPI, RG-haler, were designed using two kinds of grid inserts. Salbutamol sulfate/lactose blend (Ventolin Rotacaps® was selected as a model formulation to analyze the performance of all inhalers and compare their efficiency with three marketed devices (Rotahaler®, Spinhaler® and ISF inhalator® using the twin impinger (TI. Deposition of the drug in device was significantly (P<0.05 lower for ISF inhalator® and all kinds of RG-halers in comparison with those of Rotahaler® and Spinhaler®. The amount of drug deposited in the stage 2 and the respirable dose for RG-halers were similar to those of ISF inhalator® and significantly (P<0.05 higher than those of Rotahaler® and Spinhaler®. The results suggest efficient aerosol generating capability of the RG-haler.

  16. Peak inspiratory flow generated through different analogue dry powder inhalers in Shenzhen healthy preschool children%深圳地区正常学龄前儿童常用吸入器阻力状态下的最高吸气流量分析

    Institute of Scientific and Technical Information of China (English)

    张清玲; 郑劲平; 潘卫华; 何桦; 陈桂莲; 安嘉颖; 袁丽芬; 罗锭芬

    2008-01-01

    Objective Dry powder inhalers(DPIs)are increasingly being used to deliver drugs for the treatment of asthma.It is known that DPIs require a crueial minimal inspiratory flow.Previous studies have demonstrated that the peak inspiratory flow(PIF,L/min)through a DPI is dependent on the type of device,the age of the patient,and the level of bronchial obstruction.However,the peak inspiratory flow of healtlly preschool children in China remains scant in the literature.The present study aimed to analyze the ability of inspifing flow through the resistance state of ordinary use inhaler in Shenzhen healthy preschool children by measuring the peak inspiratory flow through the different analogue dry powder inhalers and go further into the relationship between it and the age,weight and forced expiratory volume of the children.Method A survey in 370 healthy preschool children aged 3 to 6 years(75 children aged 3 years,104 children aged 4 years,100 children aged 5 years and 91 children aged 6 years)was carried out in Shenzhen.Peak inspiratory flow(PIF)was measured without and with resistances,which mimicked the internal resistances of several inhalers,Diskus,Turbuhaler,Autohaler,Surehaler by PIF meter(In-check DIAL)and then data PIF-N,PIF-D,PIF-T,PIF-A and PIF-S were obtained.Peak expiratory flow(PEF) was measured by PEF meter(MicroPeak,USA).These two measurements were made in a well-controlled setting,and at least three attempts were recorded to establish maximum achievement.Six spirometry parameters forced vital capacity(FVC),forced expiratory volume at 0.5 second(FEV 0.5),forced expiratory volume at 0.75 second(FEV 0.75),forced expiratory volume at one second(FEV1),maximal mid expiratory flow rate(FEF 25-75,PEF were measured by using COSMED spirometry of Italy and the FVC measurements should be around the quality control for spirometry in preschool children which we suggested and published in 2005.All data were expressed as mean±SD and analyzed with the statistical software

  17. Interferometric measurements of dry mass content in nuclei and cytoplasm in the life cycle of antheridial filaments cells of Chara vulgaris L. in their successive developmental stages

    Directory of Open Access Journals (Sweden)

    Hanna Kuran

    2015-01-01

    Full Text Available Interferometric measurements of the nucleus and cytoplasm dry mass during interphase in the successive stages of development of antheridial filaments of Chara vulgaris demonstrated that the dry mass and surface area of cell nuclei double in size in each of the successive generations of the filaments, whereas neither the surface nor the dry mass of the cytoplasm increase in such proportion in the same period. In the successive stages of development of the antheridial filaments the dry mass and surface area of the nuclei and cytoplasm gradually diminish.

  18. Numerical study on hygroscopic material drying in packed bed

    Directory of Open Access Journals (Sweden)

    M. Stakić

    2011-06-01

    Full Text Available The paper addresses numerical simulation for the case of convective drying of hygroscopic material in a packed bed, analyzing agreement between the simulated and the corresponding experimental results. In the simulation model of unsteady simultaneous one-dimensional heat and mass transfer between gas phase and dried material, it is assumed that the gas-solid interface is at thermodynamic equilibrium, while the drying rate of the specific product is calculated by applying the concept of a "drying coefficient". Model validation was done on the basis of the experimental data obtained with potato cubes. The obtained drying kinetics, both experimental and numerical, show that higher gas (drying agent velocities (flow-rates, as well as lower equivalent grain diameters, induce faster drying. This effect is more pronounced for deeper beds, because of the larger amount of wet material to be dried using the same drying agent capacity.

  19. Thin-Layer Drying Characteristics and Modeling of Chinese Jujubes

    Directory of Open Access Journals (Sweden)

    Xiao-Kang Yi

    2012-01-01

    Full Text Available A mathematical modeling of thin-layer drying of jujubes in a convective dryer was established under controlled conditions of temperature and velocity. The drying process took place both in the accelerating rate and falling rate period. We observed that higher temperature reduced the drying time, indicating higher drying rates of jujubes. The experimental drying data of jujubes were used to fit ten different thin-layer models, then drying rate constants and coefficients of models tested were determined by nonlinear regression analysis using the Statistical Computer Program. As for all the drying models, the Weibull distribution model was superior and best predicted the experimental values. Therefore, this model can be used to facilitate dryer design and promote efficient dryer operation by simulation and optimization of the drying processes. The volumetric shrinkable coefficient of jujubes decreased as the drying air temperature increased.

  20. Microwave vacuum drying characteristics of Pinus massoniana wood

    Institute of Scientific and Technical Information of China (English)

    Li Xian-jun; Li Wen-jun; Zhang Bi-guang

    2007-01-01

    Microwave-vacuum (MV) drying characteristics of plantation Masson pine (Pinus massoniana) were studied experimentally for various levels of microwave radiation time, initial moisture content (MC), vacuum level and wood thickness. The results show that the process of MV drying for wood can be significantly divided into a short accelerating rate drying period, a long constant rate drying period and falling rate drying period, and the second drying period can extend to levels of mean MC below the fiber saturation point. With the increase of initial MC and microwave radiation time, the drying rate of wood increases significantly. The vacuum level affects the drying rate in a slightly positive way. Within the range of 2 to 6 cm, the effects of sample thickness on the drying rate can be negligible.

  1. A nontransferring dry adhesive with hierarchical polymer nanohairs

    KAUST Repository

    Jeong, H. E.

    2009-03-20

    We present a simple yet robust method for fabricating angled, hierarchically patterned high-aspect-ratio polymer nanohairs to generate directionally sensitive dry adhesives. The slanted polymeric nanostructures were molded from an etched polySi substrate containing slanted nanoholes. An angled etching technique was developed to fabricate slanted nanoholes with flat tips by inserting an etch-stop layer of silicon dioxide. This unique etching method was equipped with a Faraday cage system to control the ion-incident angles in the conventional plasma etching system. The polymeric nanohairs were fabricated with tailored leaning angles, sizes, tip shapes, and hierarchical structures. As a result of controlled leaning angle and bulged flat top of the nanohairs, the replicated, slanted nanohairs showed excellent directional adhesion, exhibiting strong shear attachment (approximately 26 N/cm(2) in maximum) in the angled direction and easy detachment (approximately 2.2 N/cm(2)) in the opposite direction, with a hysteresis value of approximately 10. In addition to single scale nanohairs, monolithic, micro-nanoscale combined hierarchical hairs were also fabricated by using a 2-step UV-assisted molding technique. These hierarchical nanoscale patterns maintained their adhesive force even on a rough surface (roughness <20 microm) because of an increase in the contact area by the enhanced height of hierarchy, whereas simple nanohairs lost their adhesion strength. To demonstrate the potential applications of the adhesive patch, the dry adhesive was used to transport a large-area glass (47.5 x 37.5 cm(2), second-generation TFT-LCD glass), which could replace the current electrostatic transport/holding system with further optimization.

  2. A Dynamic Design Space for Primary Drying During Batch Freeze-Drying

    DEFF Research Database (Denmark)

    Mortier, Séverine Thérèse F C; Van Bockstal, Pieter Jan; Nopens, Ingmar;

    2016-01-01

    model is used to determine the optimal values for the adaptable variables, hereby accounting for the uncertainty in all involved model parameters. A dynamic Design Space was constructed with a risk of failure acceptance level of 0.01%, i.e. a 'zero-failure' situation. Even for a risk of failure of 0......Biopharmaceutical products are emerging within the pharmaceutical industry. However, biopharmaceuticals are often unstable in aqueous solution. Freeze-drying (lyophilisation) is the preferred method to achieve a stable product with an increased shelf-life. During batch freeze-drying, there are only...... two adaptable process variables, i.e. the shelf temperature and the pressure in the drying chamber. The value of both should be optimized, preferably in a dynamic way, to minimise the primary drying time while respecting process and equipment constraints and ensuring end product quality. A mechanistic...

  3. Emission and drying kinetics of paper mill sludge during contact drying process

    Institute of Scientific and Technical Information of China (English)

    Wen-yi DENG; Xiao-dong LI; Jian-hua YAN; Fei WANG; Sheng-yong LU; Yong CHI; Ke-fa CEN

    2009-01-01

    The emission and contact drying kinetics of the paper mill sludge (PMS) were studied through experiments carried out in a paddle dryer. To get a better understanding of its drying mechanism, a penetration model developed by Tsotsas and Schlunder (1986) was used to simulate the drying kinetics of the PMS. The result indicated that this kinetics could be divided into three phases: pasty, lumpy and granular phases, and could be successfully simulated by the penetration model as the related sludge parameters were integrated into the model. The emission rate curves of the volatile compounds (VCs) were interrelated to the drying rate curve of the PMS, especially for volatile fatty acids (VFAs) and ammonia in this study.

  4. Characterisation of spray dried soy sauce powders made by adding crystalline carbohydrates to drying carrier.

    Science.gov (United States)

    Wang, Wei; Zhou, Weibiao

    2015-02-01

    This study aimed to reduce stickiness and caking of spray dried soy sauce powders by introducing a new crystalline structure into powder particles. To perform this task, soy sauce powders were formulated by using mixtures of cellulose and maltodextrin or mixtures of waxy starch and maltodextrin as drying carriers, with a fixed carrier addition rate of 30% (w/v) in the feed solution. The microstructure, crystallinity, solubility as well as stickiness and caking strength of all the different powders were analysed and compared. Incorporating crystalline carbohydrates in the drying carrier could significantly reduce the stickiness and caking strength of the powders when the ratio of crystalline carbohydrates to maltodextrin was above 1:5 and 1:2, respectively. X-ray Diffraction (XRD) results showed that adding cellulose or waxy starch could induce the crystallinity of powders. Differential Scanning Calorimetry (DSC) results demonstrated that the native starch added to the soy sauce powders did not fully gelatinize during spray drying.

  5. Use of spray-dried zirconia microspheres in the separation of immunoglobulins from cell culture supernatant.

    Science.gov (United States)

    Subramanian, A; Carr, P W; McNeff, C V

    2000-08-18

    A method suitable for the isolation of monoclonal antibodies (MAbs) on novel zirconia microspheres (20-30 microm) is described. Zirconia microspheres were generated by spray drying colloidal zirconia. Spray-dried zirconia microspheres were further classified and characterized by X-ray diffraction, BET porosimetry and scanning electron microscopy. Spray-dried zirconia microspheres were modified with ethylenediamine-N,N'-tetra(methylenephosphonic) acid (EDTPA) to create a cation-exchange chromatographic support. The chromatographic behavior of a semi-preparative column packed with EDTPA-modified zirconia microspheres was evaluated and implications for scale-up are provided. EDTPA-modified zirconia microspheres were further used to purify MAbs from cell culture supernatant. Analysis by enzyme linked immunosorbent assay and gel electrophoresis demonstrate that MAbs can be recovered from a cell culture supernatant at high yield (92-98%) and high purity (>95%) in a single chromatographic step.

  6. Management Tools and Potential of Dry Miombo Woodland in Carbon Cycling

    DEFF Research Database (Denmark)

    Mwakalukwa, Ezekiel Edward

    Abstract Tools to support sustainable management of dry Miombo woodlands and precise assessment of carbon storage and sequestration potential are in most cases lacking in Tanzania. Accordingly, using Gangalamtumba Village Land Forest Reserve as a case study area located in Iringa region......, this thesis aims to develop management tools and generate information that will enhance our understanding of the actual and potential contribution of dry Miombo woodlands in carbon cycling. This is done through a detailed assessment of floristic composition, structure, species associations and through...... development of models for wood basic density, volume, biomass and growth. The overall research objective was thus to enhance the basis for good woodland management planning including exploring the extent to which dry Miombo woodlands in Tanzania store and sequester C from the atmosphere. Correct...

  7. Management Tools and Potential of Dry Miombo Woodland in Carbon Cycling

    DEFF Research Database (Denmark)

    Mwakalukwa, Ezekiel Edward

    , this thesis aims to develop management tools and generate information that will enhance our understanding of the actual and potential contribution of dry Miombo woodlands in carbon cycling. This is done through a detailed assessment of floristic composition, structure, species associations and through......Abstract Tools to support sustainable management of dry Miombo woodlands and precise assessment of carbon storage and sequestration potential are in most cases lacking in Tanzania. Accordingly, using Gangalamtumba Village Land Forest Reserve as a case study area located in Iringa region...... in above- and below-ground soil carbon pools. Assuming that other species’ production are equal to B. spiciformis, which is the most dominant species in the study area, the estimated C sequestration potential of the dry Miombo woodlands was found to vary from 0.42 ± 0.03 Mg C ha-1year-1 to 1.39 ± 0.08 Mg C...

  8. Computational analysis of heat and mass transfer during microwave drying of timber

    Directory of Open Access Journals (Sweden)

    Kadem S.

    2016-01-01

    Full Text Available The need for improvement in engineering design and process optimization for microwave drying of wood has stimulated the development of computer simulation techniques to predict temperature and moisture history and distribution wood sample. A three-dimensional comprehensive heat and mass transfer model was developed to simulate the free liquid, vapor, and bound water movement including consideration of internal heat generation in microwave drying of yellow poplar specimens. The model was solved using the finite element analysis with FEMLsoftware. The model predictions compared favorably with predicted and experimental solutions. The effect of changes of the most important parameters on the predictions of the model is also presented. The results showed that the variations of irradiation time, microwave power level and sample thickness played an important role in overall drying kinetics.

  9. Comparative effects of dried plum and dried apple on bone in postmenopausal women.

    Science.gov (United States)

    Hooshmand, Shirin; Chai, Sheau C; Saadat, Raz L; Payton, Mark E; Brummel-Smith, Kenneth; Arjmandi, Bahram H

    2011-09-01

    Aside from existing drug therapies, certain lifestyle and nutritional factors are known to reduce the risk of osteoporosis. Among the nutritional factors, dried plum or prunes (Prunus domestica L.) is the most effective fruit in both preventing and reversing bone loss. The objective of the present study was to examine the extent to which dried plum reverses bone loss in osteopenic postmenopausal women. We recruited 236 women, 1-10 years postmenopausal, not on hormone replacement therapy or any other prescribed medication known to influence bone metabolism. Qualified participants (n 160) were randomly assigned to one of the two treatment groups: dried plum (100 g/d) or dried apple (comparative control). Participants received 500 mg Ca plus 400 IU (10 μg) vitamin D daily. Bone mineral density (BMD) of lumbar spine, forearm, hip and whole body was assessed at baseline and at the end of the study using dual-energy X-ray absorptiometry. Blood samples were collected at baseline, 3, 6 and 12 months to assess bone biomarkers. Physical activity recall and 1-week FFQ were obtained at baseline, 3, 6 and 12 months to examine physical activity and dietary confounders as potential covariates. Dried plum significantly increased BMD of ulna and spine in comparison with dried apple. In comparison with corresponding baseline values, only dried plum significantly decreased serum levels of bone turnover markers including bone-specific alkaline phosphatase and tartrate-resistant acid phosphatase-5b. The findings of the present study confirmed the ability of dried plum in improving BMD in postmenopausal women in part due to suppressing the rate of bone turnover.

  10. Dry needling versus cervical spine manipulation combined with dry needling of infraspinatus muscle myofascial trigger points

    OpenAIRE

    2013-01-01

    M.Tech. (Chiropractic) Objective: The purpose of this study was to compare dry needling with cervical spine manipulation combined with dry needling, in the treatment of infraspinatus muscle myofascial trigger points. Study Design: This was a randomized experimental study Setting: The participants were treated at the University of Johannesburg chiropractic day clinic Subjects: 30 participants volunteered for the study. The participants were divided into groups by randomly drawing thirty num...

  11. Steam generators

    Energy Technology Data Exchange (ETDEWEB)

    Beckmann, G.; Gilli, P.V.; Fritz, K.; Lippitsch, J.

    1975-12-02

    A steam generator is disclosed which is particularly adapted to be used in nuclear power plants. A casing is provided with an inlet and outlet to receive and discharge a primary heating fluid from which heat is to be extracted. A pair of tube plates extend across the interior of the casing at the region of the inlet and outlet thereof, and a plurality of tubes extend along the interior of the casing and are connected in parallel between the tube plates with all of the tubes having open ends communicating with the inlet and outlet of the casing so that the primary heating fluid will flow through the interior of the tubes while a fluid in the casing at the exterior of the tubes will extract heat from the primary fluid. The casing has between the tubes at the region of the inlet a superheating chamber and at the region of the outlet a preheating chamber and between the latter chambers an evaporating chamber, the casing receiving water through an inlet at the preheating chamber and discharging superheated steam through an outlet at the superheating chamber. A separator communicates with the evaporating chamber to receive a mixture of steam and water therefrom for separating the steam from the water and for delivering the separated steam to the superheating chamber.

  12. Turmeric (Curcuma longa L.) drying: an optimization approach using microwave-vacuum drying.

    Science.gov (United States)

    Hirun, Sathira; Utama-Ang, Niramon; Roach, Paul D

    2014-09-01

    This study investigated the effect of microwave power (2,400-4,000 W) and drying times (10-30 min) on the quality of dried turmeric in terms of colour (L, a*, b*), moisture content, water activity (aw), ash, antioxidant activity (2,2-dipheneyl-1-picrylhydrazyl; DPPH), total phenolic and curcuminoids content. In addition, Response Surface Methodology (RSM) was implemented to optimize the drying conditions for turmeric. A range of quality parameters, microwave power (W) and time (min) were fitted to quadratic models using a central composite design. The Analysis of Variance (ANOVA) statistic results suggested that the optimal qualities (i.e., aw, value, moisture content, phenolic content, curcuminoid content and EC50 and L value) of dried turmeric were achieved at high vacuum-microwave power (3,500-4,000 W) and long duration (27-30 min). The improvement in the quality of dried turmeric microwave-vacuum drying in these conditions was illustrated through the enzymatic browning reaction via inhibition of polyphenol oxidase which suppressed the formation of the brown pigments and increased the phenol substrates.

  13. Anthocyanin content in dried berry skins and wine produced from dried grapes

    Directory of Open Access Journals (Sweden)

    PEÇULI ANISA

    2014-06-01

    Full Text Available Anthocyanin, are the substances which are biosynthesized in the grape skin, extracted during the maceration and vinification and which contribute in wine color. During the aging of wines these substances are converted in their derivates, contributing in wine quality. For this reasons in nowadays there is a big attention of studies in these components. Wines from two grapes variety, a French variety, Cabernet Sauvignon and the other an autochthonous variety of Albania Kallmet were observed. The role of drying in concentration of anthocyanin in skins berry and if this technique is reflected in wine produced from this dried grape, was studied. The results shown that the quantity of anthocyanins from dried skins varied from 136 mg/100gr fresh product to 468 mg/100gr. The dried skins had the higher quantity, but this result was more significant for Cabernet Sauvignon wine than Kallmet wine. Measurement of phenolic content showed no significant changes between wines from dried and non-dried grapes.

  14. Crystallization and X-ray diffraction of spray-dried and freeze-dried amorphous lactose.

    Science.gov (United States)

    Haque, Md Kamrul; Roos, Yrjö H

    2005-02-07

    Crystallization of spray-dried and freeze-dried amorphous lactose over different relative vapor pressures (RVP) and storage times was studied. Crystallization was observed from increasing peak intensities in X-ray diffraction patterns. Lactose was crystallized in the samples stored at RVP of 44.1% and above in both types of dehydrated powders. The rate of crystallization increased with increasing RVP and storage time. Similar crystallization behavior of both spray-dried and freeze-dried lactose was observed. Lactose crystallized as alpha-lactose monohydrate, anhydrous beta-lactose, and the anhydrous form of alpha- and beta-lactose in a molar ratio of 5:3 and 4:1 in both spray-dried and freeze-dried forms. Peak intensities of X-ray diffraction patterns for anhydrous beta-lactose were decreased, and for alpha-lactose monohydrate increased with increasing storage RVP and time. The crystallization data were successfully modeled using Avrami equation at RVP of 54.5% and above. The crystallization data obtained is helpful in understanding and predicting storage stability of lactose-containing food and pharmaceutical products.

  15. Viability of Bifidobacterium Pseudocatenulatum G4 after Spray-Drying and Freeze-Drying

    Directory of Open Access Journals (Sweden)

    Stephenie Wong

    2010-04-01

    Full Text Available Viability of Bifidobacterium pseudocatenulatum G4 following spray-drying and freeze-drying in skim milk was evaluated. After spray-drying, the strain experienced over 99% loss in viability regardless of the air outlet temperature (75 and 85 °C and the heat-adaptation temperature (45 and 65 °C, 30 min. The use of heat-adaptation treatment to improve the thermotolerance of this strain was ineffective. On the other hand, the strain showed a superior survival at 71.65%–82.07% after freeze-drying. Viable populations of 9.319–9.487 log10 cfu/g were obtained when different combinations of skim milk and sugar were used as cryoprotectant. However, the addition of sugars did not result in increased survival during the freeze-drying process. Hence, 10% (w/v skim milk alone is recommended as a suitable protectant and drying medium for this strain. The residual moisture content obtained was 4.41% ± 0.44%.

  16. Drying kinetics and characteristics of combined infrared-vacuum drying of button mushroom slices

    Science.gov (United States)

    Salehi, Fakhreddin; Kashaninejad, Mahdi; Jafarianlari, Ali

    2016-10-01

    Infrared-vacuum drying characteristics of button mushroom (Agaricus bisporus) were evaluated in a combined dryer system. The effects of drying parameters, including infrared radiation power (150-375 W), system pressure (5-15 kPa) and time (0-160 min) on the drying kinetics and characteristics of button mushroom slices were investigated. Both the infrared lamp power and vacuum pressure influenced the drying time of button mushroom slices. The rate constants of the nine different kinetic's models for thin layer drying were established by nonlinear regression analysis of the experimental data which were found to be affected mainly by the infrared power level while system pressure had a little effect on the moisture ratios. The regression results showed that the Page model satisfactorily described the drying behavior of button mushroom slices with highest R value and lowest SE values. The effective moisture diffusivity increases as power increases and range between 0.83 and 2.33 × 10-9 m2/s. The rise in infrared power has a negative effect on the ΔE and with increasing in infrared radiation power it was increased.

  17. Modeling of convective drying kinetics of Pistachio kernels in a fixed bed drying system

    Directory of Open Access Journals (Sweden)

    Balbay Asım

    2013-01-01

    Full Text Available Drying kinetics of Pistachio kernels (PKs with initial moisture content of 32.4% (w.b was investigated as a function of drying conditions in a fixed bed drying system. The drying experiments were carried out at different temperatures of drying air (40, 60 and 80°C and air velocities (0.05, 0.075 and 0.1 m/s. Several experiments were performed in terms of mass of PKs (15g and 30g using a constant air velocity of 0.075 m/s. The fit quality of models was evaluated using the determination coefficient (R2, sum square error (SSE and root mean square error (RMSE. Among the selected models, the Midilli et al model was found to be the best models for describing the drying behavior of PKs. The activation energies were calculated as 29.2 kJ/mol and effective diffusivity values were calculated between 1.38 and 4.94x10-10 m2/s depending on air temperatures.

  18. Drying kinetics and characteristics of combined infrared-vacuum drying of button mushroom slices

    Science.gov (United States)

    Salehi, Fakhreddin; Kashaninejad, Mahdi; Jafarianlari, Ali

    2017-05-01

    Infrared-vacuum drying characteristics of button mushroom ( Agaricus bisporus) were evaluated in a combined dryer system. The effects of drying parameters, including infrared radiation power (150-375 W), system pressure (5-15 kPa) and time (0-160 min) on the drying kinetics and characteristics of button mushroom slices were investigated. Both the infrared lamp power and vacuum pressure influenced the drying time of button mushroom slices. The rate constants of the nine different kinetic's models for thin layer drying were established by nonlinear regression analysis of the experimental data which were found to be affected mainly by the infrared power level while system pressure had a little effect on the moisture ratios. The regression results showed that the Page model satisfactorily described the drying behavior of button mushroom slices with highest R value and lowest SE values. The effective moisture diffusivity increases as power increases and range between 0.83 and 2.33 × 10-9 m2/s. The rise in infrared power has a negative effect on the ΔE and with increasing in infrared radiation power it was increased.

  19. Infrared Drying as a Potential Alternative to Convective Drying for Biltong Production.

    Science.gov (United States)

    Cherono, Kipchumba; Mwithiga, Gikuru; Schmidt, Stefan

    2016-06-03

    Two infrared systems set at an intensity of 4777 W/m(2) with peak emission wavelengths of 2.5 and 3.5 µm were used to produce biltong by drying differently pre-treated meat. In addition to meat texture and colour, the microbial quality of the biltong produced was assessed by quantifying viable heterotrophic microorganisms using a most probable number (MPN) method and by verifying the presence of presumptive Escherichia coli in samples produced using infrared and conventional convective drying. The two infrared drying systems reduced the heterotrophic microbial burden from 5.11 log10 MPN/g to 2.89 log10 MPN/g (2.5 µm) and 3.42 log10 MPN/g (3.5 µm), respectively. The infrared systems achieved an up to one log higher MPN/g reduction than the convective system. In biltong samples produced by short wavelength (2.5 µm) infrared drying, E. coli was not detectable. This study demonstrates that the use of short wavelength infrared drying is a potential alternative to conventional convective drying by improving the microbiological quality of biltong products while at the same time delivering products of satisfactory quality.

  20. The nutritive value of selected commercial dry dog foods

    OpenAIRE

    Michal Rolinec; Daniel Bíro; Branislav Gálik; Milan Šimko; Miroslav Juráček; Kristína Tvarožková; Andrea Ištoková

    2016-01-01

    The goal of this study was to analysed and compared the nutrients content of dry dog foods with nutrient content, which is declared by the manufacturer of the dry dog foods. 15 dry dog foods bought in the Slovak republic were analysed for dry matter, crude protein, crude fat, crude fiber, nitrogen free extract and ash concentration. Nutrients analysis of dry dog foods were realised in Laboratory of Quality and Nutritional Value of Feeds. We found, that only 6 from 15 dry dog food samples were...

  1. Studies on Microwave Heated Drying-rate Equations of Foods

    OpenAIRE

    1990-01-01

    In order to design various microwave heated drying apparatuses, we must take drying-rate equations which are based on simple drying-rate models. In a previous paper (KUBOTA, et al., 1990), we have studied a convenient microwave heated drying instrument, and studied the simple drying-rate equations of potato and so on by using the simple empirical rate equations that have been reported in previous papers (KUBOTA, 1979-1, 1979-2). In this paper, we studied the microwave drying rate of the const...

  2. Microwave-assisted drying of blueberry (Vaccinium corymbosum L.) fruits: Drying kinetics, polyphenols, anthocyanins, antioxidant capacity, colour and texture.

    Science.gov (United States)

    Zielinska, Magdalena; Michalska, Anna

    2016-12-01

    The aim of the study was to evaluate the effect of hot air convective drying (HACD), microwave vacuum drying (MWVD) and their combination (HACD+MWVD) on the drying kinetics, colour, total polyphenols, anthocyanins antioxidant capacity and texture of frozen/thawed blueberries. Drying resulted in reduction of total polyphenols content and antioxidant capacity (69 and 77%, respectively). The highest content of total polyphenols was noted after HACD at 90°C. Lower air temperature and prolonged exposure to oxygen resulted in greater degradation of polyphenols and antioxidant capacity. Drying processes caused a significant decrease (from 70 to 95%) in the content of anthocyanins. The highest content of anthocyanins and the strongest antioxidant capacity was found in blueberries dried using HACD at 90°C+MWVD. Among drying methods, HACD at 90°C+MWVD satisfied significant requirements for dried fruits i.e. short drying time and improved product quality.

  3. Drying kinetics and physico-chemical characteristics of Osmo- dehydrated Mango, Guava and Aonla under different drying conditions.

    Science.gov (United States)

    Kumar, P Suresh; Sagar, V R

    2014-08-01

    Mango (Mangiferra indica L), guava (Psiduim guajava L.) slices and aonla (Emblica officinalis L) segments were osmo-dried under four different dying conditions viz., cabinet drier (CD), vacuum oven drier (VOD), low temperature drier (LTD) and solar drier (SD) to evaluate the best drying condition for the fruits. It was found that vacuum oven drying was superior to other mode of drying as it holds maximum nutrients like acidity, ascorbic acid, sugar and water removal and moisture ratio of products. It was found through regression analysis that drying ratio and rehydration ratio was also superior in vacuum drying followed by cabinet drying. In addition, descriptive analysis on sensory score was also found best with vacuum drying while the Non-enzymatic browning (NEB), which is undesirable character on dried product, was more with solar drier.

  4. Critical Wave Forms in Dry Type Transformers

    DEFF Research Database (Denmark)

    Pedersen, Kenneth; Holbøll, Joachim; Henriksen, Mogens

    2005-01-01

    This paper concerns critical wave forms in dry type transformers under transient voltage application. A very general approach has been applied, meaning that many of the results will be applicable to various types of power transformers. The results can be very useful if they are combined with know......This paper concerns critical wave forms in dry type transformers under transient voltage application. A very general approach has been applied, meaning that many of the results will be applicable to various types of power transformers. The results can be very useful if they are combined...... with knowledge of the ageing effects of the insulation. Especially fast transients are likely to become a major issue due to fast breakers and power electronics. In order to perform relevant research in transformer insulation with respect to this subject, fundamental knowledge about the transmission...

  5. Dry-Mass Sensing for Microfluidics

    CERN Document Server

    Müller, T; Knowles, T P J

    2014-01-01

    We present an approach for interfacing an electromechanical sensor with a microfluidic device for the accurate quantification of the dry mass of analytes within microchannels. We show that depositing solutes onto the active surface of a quartz crystal microbalance by means of an on-chip microfluidic spray nozzle and subsequent solvent removal provides the basis for the real-time determination of dry solute mass. Moreover, this detection scheme does not suffer from the decrease in the sensor quality factor and the viscous drag present if the measurement is performed in a liquid environment, yet allows solutions to be analysed. We demonstrate the sensitivity and reliability of our approach by controlled deposition of nanogram levels of salt and protein from a micrometer-sized channel.

  6. Radioactive Dry Process Material Treatment Technology Development

    Energy Technology Data Exchange (ETDEWEB)

    Park, J. J.; Hung, I. H.; Kim, K. K. (and others)

    2007-06-15

    The project 'Radioactive Dry Process Material Treatment Technology Development' aims to be normal operation for the experiments at DUPIC fuel development facility (DFDF) and safe operation of the facility through the technology developments such as remote operation, maintenance and pair of the facility, treatment of various high level process wastes and trapping of volatile process gases. DUPIC Fuel Development Facility (DFDF) can accommodate highly active nuclear materials, and now it is for fabrication of the oxide fuel by dry process characterizing the proliferation resistance. During the second stage from march 2005 to February 2007, we carried out technology development of the remote maintenance and the DFDF's safe operation, development of treatment technology for process off-gas, and development of treatment technology for PWR cladding hull and the results was described in this report.

  7. Dynamics of Drying in Phenolically Tanned Materials

    Institute of Scientific and Technical Information of China (English)

    Julian F. V. Vincent

    2004-01-01

    The cuticle of a maggot goes through a mechanical transition when it dries, increasing in stiffness by about an order of magnitude (e. g. from 0.5 GPa to 5 GPa) as the water content drops from about 1 g/g (weight of water per unit dry weight) to 0.4 g/g. Thus stiffness represents the loss of freezable water and is more or less diagnostic of a material stabilized by hydrogen bonds. Further loss in water results in a smaller increase in stiffness. In natural systems the water content is controlled by the addition of phenolic residues, resulting in tanning or sclerotisation, which drives the matrix components towards co-operative interaction and makes the material permanently waterproof.

  8. Latex migration in battery slurries during drying.

    Science.gov (United States)

    Lim, Sanghyuk; Ahn, Kyung Hyun; Yamamura, Masato

    2013-07-02

    We used real-time fluorescence microscopy to investigate the migration of latex particles in drying battery slurries. The time evolution of the fluorescence signals revealed that the migration of the latex particles was suppressed above the entanglement concentration of carboxymethyl cellulose (CMC), while it was significantly enhanced when CMC fully covered the surfaces of the graphite particles. In particular, a two-step migration was observed when the graphite particles flocculated by depletion attraction at high CMC/graphite mass ratios. The transient states of the nonadsorbing CMC and graphite particles in a medium were discussed, and the uses of this novel measurement technique to monitor the complex drying processes of films were demonstrated.

  9. Dry release of all-polymer structures

    DEFF Research Database (Denmark)

    Haefliger, D.; Nordstrøm, M.; Rasmussen, Peter Andreas

    2005-01-01

    We present a simple dry release technique which uses a thin fluorocarbon film for efficient removal of plastic microdevices from a mould or a handling substrate by reducing the adhesion between the two. This fluorocarbon film is deposited on the substrate in an advanced Si dry etch device utilising...... the C4F8 passivation plasma. Micromachined polymer chips made of SU-8 are removed from the handling substrate by lifting them off using mechanical tweezers. Effective release of chips of several mm(2) size within a few seconds and the lift-off of fragile, 5.5-mu m-thin cantilevers at a yield of almost...... 100% were demonstrated on wafer-scale. The fluorocarbon film showed excellent compatibility with metal etch processes and polymer baking and curing steps. It further facilitates demoulding of polydimethylsiloxane stamps suitable for soft-lithography....

  10. Dry face milling of titanium alloys

    Institute of Scientific and Technical Information of China (English)

    Ahmed Hassan; Zhenqiang Yao

    2004-01-01

    In machining titanium alloys, cutting tools generally wear out very rapidly because of the high cutting temperature resulted from the low thermal conductivity and density of the work material. In order to increase the tool life, it is necessary to suppress the cutting heat as much as possible by applying an abundant amount of coolant, but this will entail serious techno-environmental and biological problems. To study the performance and avoid these limitations, a PVD-coated insert was used to the dry face mill of (α +β) titanium alloys. As a result it was found that the inserts exhibit an excellent cutting performance at low cutting speeds and feed rates, and there is no significant difference in the dominant insert failure mode between the wet and dry cutting in discontinuous cutting.

  11. Spray Drying of Mosambi Juice in Lab

    Science.gov (United States)

    Singh, S. V.; Verma, A.

    2014-01-01

    The studies on spray drying of mosambi juice were carried out with Laboratory spray dryer set-up (LSD-48 MINI SPRAY DRYER-JISL). Inlet and outlet air temperature and maltodextrin (drying agent) concentration was taken as variable parameters. Experiments were conducted by using 110 °C to 140 °C inlet air temperature, 60 °C to 70 °C outlet air temperature and 5-7 % maltodextrin concentration. The free flow powder of mosambi juice was obtained with 7 % maltodextrin at 140 °C inlet air temperature and 60 °C outlet air temperature. Fresh and reconstituted juices were evaluated for vitamin C, titrable acidity and sensory characteristics. The reconstituted juice was found slightly acceptable by taste panel.

  12. Consumer Acceptance of Dry Dog Food Variations

    Directory of Open Access Journals (Sweden)

    Brizio Di Donfrancesco

    2014-06-01

    Full Text Available The objectives of this study were to compare the acceptance of different dry dog food products by consumers, determine consumer clusters for acceptance, and identify the characteristics of dog food that drive consumer acceptance. Eight dry dog food samples available in the US market were evaluated by pet owners. In this study, consumers evaluated overall liking, aroma, and appearance liking of the products. Consumers were also asked to predict their purchase intent, their dog’s liking, and cost of the samples. The results indicated that appearance of the sample, especially the color, influenced pet owner’s overall liking more than the aroma of the product. Overall liking clusters were not related to income, age, gender, or education, indicating that general consumer demographics do not appear to play a main role in individual consumer acceptance of dog food products.

  13. Evolution of spent fuel dry storage

    Energy Technology Data Exchange (ETDEWEB)

    Standring, Paul Nicholas [International Atomic Energy Agency, Vienna (Austria). Div. of Nuclear Fuel Cycle and Waste Technology; Takats, Ferenc [TS ENERCON KFT, Budapest (Hungary)

    2016-11-15

    Around 10,000 tHM of spent fuel is discharged per year from the nuclear power plants in operation. Whilst the bulk of spent fuel is still held in at reactor pools, 24 countries have developed storage facilities; either on the reactor site or away from the reactor site. Of the 146 operational AFR storage facilities about 80 % employ dry storage; the majority being deployed over the last 20 years. This reflects both the development of dry storage technology as well as changes in politics and trading relationships that have affected spent fuel management policies. The paper describes the various approaches to the back-end of the nuclear fuel cycle for power reactor fuels and provides data on deployed storage technologies.

  14. [Oral medicine 2. Treatment of dry mouth].

    Science.gov (United States)

    Vissink, A; Visser, A; Spijkervet, F K L

    2012-11-01

    Treatment of dry mouth starts with determining the salivary gland function by measuring the unstimulated and stimulated flow rate.Treatment depends on these measurements. Iffunctioning salivary gland tissues with saliva producing potential are present, stimulation of the salivary glands by gum chewing or sucking sugar-free sweets is recommended. Salivary gland stimulation may also be achieved using medications, acupuncture and electrostimulation. If stimulation is insufficient, moistening the oral mucosa with a sip ofwater regularly during the day is one of the easiest and most effective methods of easing dry mouth. In addition, the use of saliva replacement therapy might be beneficial, but only with proper instruction. With regard to the caries risk in dentate patients, a fluoride rinse or gel should be prescribed.

  15. A batch fabricated biomimetic dry adhesive

    Science.gov (United States)

    Northen, Michael T.; Turner, Kimberly L.

    2005-08-01

    The fine hair adhesive system found in nature is capable of reversibly adhering to just about any surface. This dry adhesive, best demonstrated in the pad of the gecko, makes use of a multilevel conformal structure to greatly increase inelastic surface contact, enhancing short range interactions and producing significant amounts of attractive forces. Recent work has attempted to reproduce and test the terminal submicrometre 'hairs' of the system. Here we report the first batch fabricated multi-scale conformal system to mimic nature's dry adhesive. The approach makes use of massively parallel MEMS processing technology to produce 20-150 µm platforms, supported by single slender pillars, and coated with ~2 µm long, ~200 nm diameter, organic looking polymer nanorods, or 'organorods'. To characterize the structures a new mesoscale nanoindenter adhesion test technique has been developed. Experiments indicate significantly improved adhesion with the multiscale system. Additional processing caused a hydrophilic to hydrophobic transformation of the surface and testing indicated further improvement in adhesion.

  16. Dry Eye as a Mucosal Autoimmune Disease

    Science.gov (United States)

    Stern, Michael E.; Schaumburg, Chris S.; Pflugfelder, Stephen C.

    2013-01-01

    Dry eye is a common ocular surface inflammatory disease that significantly affects quality of life. Dysfunction of the lacrimal function unit (LFU) alters tear composition and breaks ocular surface homeostasis, facilitating chronic inflammation and tissue damage. Accordingly, the most effective treatments to date are geared towards reducing inflammation and restoring normal tear film. The pathogenic role of CD4+ T cells is well known, and the field is rapidly realizing the complexity of other innate and adaptive immune factors involved in the development and progression of disease. The data support the hypothesis that dry eye is a localized autoimmune disease originating from an imbalance in the protective immunoregulatory and proinflammatory pathways of the ocular surface. PMID:23360156

  17. Dry electrode bio-potential recordings.

    Science.gov (United States)

    Gargiulo, Gaetano; Bifulco, Paolo; McEwan, Alistair; Nasehi Tehrani, Joubin; Calvo, Rafael A; Romano, Maria; Ruffo, Mariano; Shephard, Richard; Cesarelli, Mario; Jin, Craig; Mohamed, Armin; van Schaik, André

    2010-01-01

    As wireless bio-medical long term monitoring moves towards personal monitoring it demands very high input impedance systems capable to extend the reading of bio-signal during the daily activities offering a kind of "stress free", convenient connection, with no need for skin preparation. In particular we highlight the development and broad applications of our own circuits for wearable bio-potential sensor systems enabled by the use of an FET based amplifier circuit with sufficiently high impedance to allow the use of passive dry electrodes which overcome the significant barrier of gel based contacts. In this paper we present the ability of dry electrodes in long term monitoring of ECG, EEG and fetal ECG.

  18. Land application uses for dry flue gas desulfurization by-products. Executive summary

    Energy Technology Data Exchange (ETDEWEB)

    Dick, W.; Bigham, J.; Forster, R.; Hitzhusen, F.; Lal, R.; Stehouwer, R.; Traina, S.; Wolfe, W.; Haefner, R.; Rowe, G.

    1999-01-31

    Flue gas desulfurization (FGD) scrubbing technologies create several types of by-products. This project focused primarily on by-product materials obtained from what are commonly called ''dry scrubbers'' which produce a dry, solid material consisting of excess sorbent, reaction product that contains sulfate and sulfite, and coal fly ash. Prior to this project, dry FGD by-products were generally treated as solid wastes and disposed in landfills. However, landfill sites are becoming scarce and tipping fees are constantly increasing; The major objective of this project was to develop beneficial uses, via recycling, capable of providing economic benefits to both the producer and the end user of the FGD by-product. It is equally important, however, that the environmental impacts be carefully assessed so that the new uses developed are not only technically feasible but socially acceptable. Specific objectives developed for this project were derived over an 18-month period during extensive discussions with personnel from industry, regulatory agencies and research institutions. These were stated as follows: Objective 1: To characterize the material generated by dry FGD processes. Objective 2: To demonstrate the utilization of dry FGD by-product as a soil amendment on agricultural lands and on abandoned and active surface coal mines in Ohio. Objective 3: To demonstrate the use of dry FGD by-product as an engineering material for soil stabilization. Objective 4: To determine the quantities of dry FGD by-product that can be utilized in each of these applications. Objective 5. To determine the environmental and economic impacts of utilizing the material. Objective 6. To calibrate environmental, engineering, and economic models that can be used to determine the applicability and costs of utilizing these processes at other sites.

  19. Convection in Drying and Freezing Ground

    CERN Document Server

    Faizal, Mir

    2012-01-01

    In this paper we analyse the drying of a soil composed of particles, water and solute impurities, and study the occurrence of convective instabilities during evaporation. We find that the main driving force for instability is the formation of a concentration gradient at the soil surface due to the evaporation of water. A similar phenomenon may occur during the thawing of frozen ground in Arctic regions.

  20. Cold Vacuum Drying Facility hazard analysis report

    Energy Technology Data Exchange (ETDEWEB)

    Krahn, D.E.

    1998-02-23

    This report describes the methodology used in conducting the Cold Vacuum Drying Facility (CVDF) hazard analysis to support the CVDF phase 2 safety analysis report (SAR), and documents the results. The hazard analysis was performed in accordance with DOE-STD-3009-94, Preparation Guide for US Department of Energy Nonreactor Nuclear Facility Safety Analysis Reports, and implements the requirements of US Department of Energy (DOE) Order 5480.23, Nuclear Safety Analysis Reports.

  1. PULSE DRYING EXPERIMENT AND BURNER CONSTRUCTION

    Energy Technology Data Exchange (ETDEWEB)

    Robert States

    2006-07-15

    Non steady impingement heat transfer is measured. Impingement heating consumes 130 T-BTU/Yr in paper drying, but is only 25% thermally efficient. Pulse impingement is experimentally shown to enhance heat transfer by 2.8, and may deliver thermal efficiencies near 85%. Experimental results uncovered heat transfer deviations from steady theory and from previous investigators, indicating the need for further study and a better theoretical framework. The pulse burner is described, and its roll in pulse impingement is analyzed.

  2. Market strategies for Central American dry beans.

    OpenAIRE

    Mertínez, Lourdes; Bernsten, Richard; Zamora, Miguel

    2004-01-01

    In the past few years, the dry bean sub-sector in CentralAmerica has witnessed many dynamic changes. Unless wefind ways to increase the competitiveness of the regionalbean sub-sector, Central American countries will likelyexperience significant negative social and economic impacts,especially since these countries are facing the challenge ofadjusting to new open markets, such as the Central AmericanFree Trade Agreement (CAFTA). Bean traders, retailers, andknowledgeable government official in C...

  3. Experimental investigations on dry stone masonry walls

    OpenAIRE

    2006-01-01

    Brick unreinforced masonry walls have been widely studied both from experimental and numerical point of view, but scarce experimental information is available for dry stone masonry walls that constitute the material more frequently used in the construction of ancient historical constructions. Therefore, the present work aims at increasing the insight about the behavior of typical ancient masonry walls under cyclic loading. To attain such goal, different experimental approaches are consi...

  4. Macstor dry spent fuel storage system

    Energy Technology Data Exchange (ETDEWEB)

    Pare, F. E. [Atomic Energy of Canada Limited, Montreal (Canada)

    1996-04-15

    AECL, a Canadian Grown Corporation established since 1952, is unique among the world's nuclear organizations. It is both supplier of research reactors and heavy water moderated CANDU power reactors as well as operator of extensive nuclear research facilities. As part of its mandate, AECL has developed products and conceptual designs for the short, intermediate and long term storage and disposal of spent nuclear fuel. AECL has also assumed leadership in the area of dry storage of spent fuel. This Canadian Crown Corporation first started to look into dry storage for the management of its spent nuclear fuel in the early 1970's. After developing silo-like structures called concrete canisters for the storage of its research reactor enriched uranium fuel, AECL went on to perfect that technology for spent CANDU natural uranium fuel. In 1989 AECL teamed up with Trans nuclear, Inc.,(TN), a US based member of the international Trans nuclear Group, to extend its dry storage technology to LWR spent fuel. This association combines AECL's expertise and many years experience in the design of spent fuel storage facilities with TN's proven capabilities of processing, transportation, storage and handling of LWR spent fuel. From the early AECL-designed unventilated concrete canisters to the advanced MACSTOR concept - Modular Air-Cooled Canister Storage - now available also for LWR fuel - dry storage is proving to be safe, economical, practical and, most of all, well accepted by the general public. AECL's experience with different fuels and circumstances has been conclusive.

  5. Dry tilt network at Mount Rainier, Washington

    Science.gov (United States)

    Dzurisin, Daniel; Johnson, Daniel J.; Symonds, R.B.

    1984-01-01

    In addition to its primary responsibility of monitoring active Mount St. Helens, the David A. Johnston Cascades Volcano Observatory (CVO) has been charged with obtaining baseline geodetic and geochemical information at each of the other potentially active Cascade volcanoes. Dry tilt and/or trilateration networks were established during 1975-82 at Mount Baker, Mount St. Helens, Mount Hood, Mount Shasta, Lassen Peak, Crater Lake, and Long Valley caldera; coverage was extended during September 1982 to include Mount Rainier.

  6. Hot Dry Rock Geothermal Energy Development Program

    Energy Technology Data Exchange (ETDEWEB)

    Smith, M.C.; Hendron, R.H.; Murphy, H.D.; Wilson, M.G.

    1989-12-01

    During Fiscal Year 1987, emphasis in the Hot Dry Rock Geothermal Energy Development Program was on preparations for a Long-Term Flow Test'' of the Phase II'' or Engineering'' hot dry rock energy system at Fenton Hill, New Mexico. A successful 30-day flow test of the system during FY86 indicated that such a system would produce heat at a temperature and rate that could support operation of a commercial electrical power plant. However, it did not answer certain questions basic to the economics of long-term operation, including the rate of depletion of the thermal reservoir, the rate of water loss from the system, and the possibility of operating problems during extended continuous operation. Preparations for a one-year flow test of the system to answer these and more fundamental questions concerning hot dry rock systems were made in FY87: design of the required surface facilities; procurement and installation of some of their components; development and testing of slimline logging tools for use through small-diameter production tubing; research on temperature-sensitive reactive chemical tracers to monitor thermal depletion of the reservoir; and computer simulations of the 30-day test, extended to modeling the planned Long-Term Flow Test. 45 refs., 34 figs., 5 tabs.

  7. Spray freeze drying of YSZ nanopowder

    Science.gov (United States)

    Raghupathy, Bala P. C.; Binner, J. G. P.

    2012-07-01

    Spray freeze drying of yttria stabilised zirconia nanopowders with a primary particle size of 16 nm has been undertaken using different solids content starting suspensions, with the effect of the latter on the flowability and crushability of the granules being investigated. The flowability and fill density of the granules increased with an increase in the solid content of the starting suspension, whilst the crushability decreased. The powder flowability, measured using a Hall flowmeter and model shoe-die filling tests, showed that the flowability of otherwise poorly flowable nanopowders can be improved to match that of the commercial spray dried submicron powder. The 5.5 vol.% solid content based suspension yielded soft agglomerates whilst a 28 vol.% solid content suspension formed hard agglomerates on spray freeze drying; the granule relics were visible in the fracture surface of the die pressed green compact in the latter case. The increase in granule strength is explained by the reduction in inter-particle distance based on the theories developed by Rumpf and Kendall. The flaw sizes computed using the Kendall model are comparable with those seen in the micrographs of the granule. With an optimum solid content, it is possible to have a granulated nanopowder with reasonable flowability and compactability resulting in homogeneous green bodies with 54 % of theoretical density.

  8. European dry cooling tower operating experience

    Energy Technology Data Exchange (ETDEWEB)

    DeSteese, J.G.; Simhan, K.

    1976-03-01

    Interviews were held with representatives of major plants and equipment manufacturers to obtain current information on operating experience with dry cooling towers in Europe. The report documents the objectives, background, and organizational details of the study, and presents an itemized account of contacts made to obtain information. Plant selection was based on a merit index involving thermal capacity and length of service. A questionnaire was used to organize operational data, when available, into nine major categories of experience. Information was also solicited concerning the use of codes and standards to ensure the achievement of cooling tower performance. Several plant operators provided finned-tube samples for metallographic analysis. Additionally, information on both operating experience and developing technology was supplied by European technical societies and research establishments. Information obtained from these contacts provides an updated and representative sample of European experience with dry cooling towers, which supplements some of the detailed reviews already available in the literature. In addition, the study presents categorized operating experience with installations which have not been reviewed so extensively, but nevertheless, have significant operational histories when ranked by the merit index. The contacts and interviews reported in the survey occurred between late March and October 1975. The study was motivated by the expressed interest of U.S. utility industry representatives who expect European experience to provide a basis of confidence that dry cooling is a reliable technology, applicable when necessary, to U.S. operating requirements.

  9. Assessment of requirements for dry towers

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, D E; Sonnichsen, J C

    1976-09-01

    The regional limitations of surface water supplies in the U.S. were assessed with respect to the consumptive use requirements of wet cooling towers. The study simulated unit consumptive use factors by region, assessed regional water supplies, and examined electric load projections through 2000 A.D. to ascertain where and when water limitations may occur and, therefore, where dry cooling may be required. It was concluded that the cooling water supply situation in the United States through the year 2000 is adequate in most areas, but is uncertain over much of the Southwest. The uncertainty is related to increasing competition for the available supplies and to potential Federal and/or State policy decisions that may have a significant effect on power plant cooling. Limitations on coastal siting, seismic zone constraints, and state constraints on the purchase and transfer of water rights from other uses to cooling supply have the potential of bringing wet/dry or dry cooling into relatively common use in the 1990's. (LCL)

  10. Summary Report for Capsule Dry Storage Project

    Energy Technology Data Exchange (ETDEWEB)

    JOSEPHSON, W S

    2003-09-04

    There are 1.936 cesium (Cs) and strontium (Sr) capsules stored in pools at the Waste Encapsulation and Storage Facility (WESF). These capsules will be moved to dry storage on the Hanford Site as an interim measure to reduce risk. The Cs/Sr Capsule Dry Storage Project (CDSP) is conducted under the assumption the capsules will eventually be moved to the repository at Yucca Mountain, and the design criteria include requirements that will facilitate acceptance at the repository. The storage system must also permit retrieval of capsules in the event vitrification of the capsule contents is pursued. A cut away drawing of a typical cesium chloride (CsCI) capsule and the capsule property and geometry information are provided in Figure 1.1. Strontium fluoride (SrF{sub 2}) capsules are similar in design to CsCl capsules. Further details of capsule design, current state, and reference information are given later in this report and its references. Capsule production and life history is covered in WMP-16938, Capsule Characterization Report for Capsule Dry Storage Project, and is briefly summarized in Section 5.2 of this report.

  11. STUDYING CONFORMATIONAL REARRANGEMENTS OF PROTEIN WHEN DRYING

    Directory of Open Access Journals (Sweden)

    Danilchenko A. S.

    2016-09-01

    Full Text Available The article gives a review and the experimental data on the nutritional value of eggs protein comprising protein, carbohydrates, minerals and amino acids. Metabolism, the structure and function of each cell, as well as external and internal protective functions are defined by proteins. We consider the study of functions of trace elements found in significant numbers in the eggs, which contribute to health: vitamin D, vitamin B12, choline, folic acid, selenium, lutein and zeaxanthin. The high content of egg protein contributes to greater satiety, weight loss and eye health. We present experimental data on the amino acid composition of the protein and experiments of drying a cooked egg white, placed in a Petri dish. After 10 minutes of drying, the weight of the protein did not change and amounted to 0.1 g, which is 16% of the weight of the original white protein. The photo shows that the protein is lost during drying white and became transparent, and protein grains look like "melted" and partially connected with each other. The data obtained can be used for understanding the operation of the biological process of protein in vivo

  12. On the dry deposition of submicron particles

    Energy Technology Data Exchange (ETDEWEB)

    Wesely, M. L.

    1999-10-08

    The air-surface exchange of particles can have a strong role in determining the amount, size, and chemical composition of particles in the troposphere. Here the authors consider only dry processes (deposition processes not directly aided by precipitation) and mostly address particles less than about 2 {micro}m in diameter (often referred to as submicron particles because most of such particles are less than 1 {micro}m in diameter). The processes that control the dry exchange of particulate material between the atmosphere and the surface of the Earth are numerous, highly varied, and sometimes poorly understood. As a result, determining which of the surface processes to parameterize or simulate in modeling the tropospheric mass budget of a particulate substance can be a significant challenge. Dry deposition, for example, can be controlled by a combination of Brownian diffusion, impaction, interception, and gravitational settling, depending on the size of the particles, the roughness of the surface on both micrometeorological and microscopic scales, the geometrical structure of vegetative canopies, and other surface characteristics such as wetness. Particles can be added to the lower atmosphere by resuspension from land surfaces and sea spray. The roles of rapid gas-to-particle conversion and growth or shrinkage of particles as a result of water condensation or evaporation in the lower few meters of the atmosphere can also have a significant impact on particle concentrations in the lower atmosphere. Here, a few micrometeorological observations and inferences on particle air-surface exchange are briefly addressed.

  13. Solar-assisted smokehouse for the drying of natural rubber on small-scale Indonesian farms

    Energy Technology Data Exchange (ETDEWEB)

    Breymayer, M.; Pass, T.; Muehlbauer, W. (Hohenheim Univ., Stuttgart (Germany). Inst. for Agricultural Engineering in the Tropics and Subtropics); Amir, E.J.; Mulato, S. (Bogor Research Inst. for Estate Crops, Bogor (Indonesia))

    1993-11-01

    Natural rubber in Indonesia is mainly produced by smallholder farmers and-being the highest foreign currency generating agricultural commodity-is of great importance for the Indonesian economy. Nevertheless, due to the lack of appropriate dryers, more than 80% of the total production has to be sold as low-grade Standard Indonesian Rubber (SIR) for a relatively low price. In order to improve the product quality, a solar-heated rubber sheet dryer was developed. It consists of a flat-plate solar air heater connected to a drying chamber. Part-recirculation of the exhaust air leads to the desired drying air temperature of 45-60[sup o]C and results in a significant reduction of the drying time. To enable drying independent of weather conditions, a biomass furnace was incorporated underneath the drying chamber. The simple design of the solar-assisted smokehouse allows local production and after further improvements seems to be an economical alternative for farmer groups or nucleus estates. (Author)

  14. Performance and Analysis of Floating dome Anaerobic Digester with Wet and Dry Feedstock

    Science.gov (United States)

    Sathish, S.; Parthiban, A.; Venugopal, S.; Jothi Prakash, V. M.

    2017-03-01

    The objective of this study is to evaluate the feasibility of anaerobic digestion to generate biogas yield and it’s performed using wet and dry feed stock. The laboratory experiment is conducted in a floating dome type anaerobic digester with 1m3 capacity. It is made up of fibre material at continues process. The starter cowdung used as an inoculum of the anaerobic digester. Then raw materials feeded as a wet type wheat straw and dry type wheat straw is the ratio of 1:1 waste/water in both the experiments wet and dry wheat straw. In this experiments are fermented at 30ºC to 35ºC temperature is maintained. The daily biogas yield, cumulative biogas yield, pH, CH4, and hydro retention time these parameters is studied and analysed. The maximum daily biogas is 25liters and 42% of methane is achieved in dry wheat straw at 15th day of digestion. The highest gas yield obtained in dry condition compare to wet condition and acid level also decreased in wet digestion.

  15. Porcelain tiles by the dry route

    Directory of Open Access Journals (Sweden)

    Boschi, A. O.

    2010-10-01

    Full Text Available In Brazil, the second largest tile producer of the world, at present, 70% of the tiles are produced by the dry route. One of the main reasons that lead to this development is the fact that the dry route uses approximately 30% less thermal energy them the traditional wet route. The increasing world concern with the environment and the recognition of the central role played by the water also has pointed towards privileging dry processes. In this context the objective of the present work is to study the feasibility of producing high quality porcelain tiles by the dry route. A brief comparison of the dry and wet route, in standard conditions industrially used today to produce tiles that are not porcelain tiles, shows that there are two major differences: the particle sizes obtained by the wet route are usually considerably finer and the capability of mixing the different minerals, the intimacy of the mixture, is also usually better in the wet route. The present work studied the relative importance of these differences and looked for raw materials and operational conditions that would result in better performance and glazed porcelain tiles of good quality.

    En Brasil, en este momento segundo productor mundial, el 70% de los pavimentos cerámicos se obtiene por vía seca. Una de las razones fundamentales se debe a que esta vía supone un consumo energético inferior, en un 30%, a la via húmeda tradicional. La creciente preocupación mundial sobre los problemas medioambientales y el reconocimiento del papel central que juega el agua en este proceso han favorecido el desarrollo de la vía seca. En este contexto, el objetivo del presente trabajo es estudiar la viabilidad de la producción de pavimentos porcelánicos de alta calidad por vía seca. Una breve comparación entre ambas vías, en las condiciones standard de producción vigentes para producciones que no son de porcelánico, indican que existen dos diferencias substanciales; el tamaño de

  16. Demonstration of the vacuum drying technique on sludge from the paper and pulp industry; Demonstration av vakuumtorktekniken paa skogsindustriellt slam

    Energy Technology Data Exchange (ETDEWEB)

    Eklund, Anders [AaF-Energikonsult AB, Stockholm (Sweden)

    2003-10-01

    Previous studies have indicated that a cost effective drying of sludge from the paper and pulp mills can be done by the use of vacuum at a lower water temperature. The purpose was to erect a pilot plant and test different types of sludge. Therefore, advantages and problems with this method could be determined. This work has planned and erected a complete pilot plant for continuous drying of sludge and the pilot plant occupies a hard surface of 10x10 meters. A drum type dryer is in the centre of the pilot plant and it has been modified for lower pressures. Other vital components are: handling of vapours, vacuum pump, hot water generation and materials handling of the sludge, both in wet and dry condition. First, tests where carried out to verify theories and previous laboratory studies. These test successfully confirmed that difficult sludge types could effectively be dried at lower temperatures by the use of vacuum. Then, tests where carried out on 9 different sludges from 7 different mills. Average sample weight was about 170 kg or 250 litres. All sludge samples could successfully be dried but with different levels of complexity. For an easier comprehension of the handling and drying, the different sludges were organised into three classes: sludge with a clear resemblance of clay, sludge with a resemblance of mud or earth and finally, sludge with a majority of fibres. Fibre type sludges were easy to dry to a high degree of dryness. However, they also dusted easily and thus, fibres easily carried over into the condensate. Earth type sludge was in wet condition difficult to handle. The drying was more time consuming and the sludge formed small round balls during the drying. These balls slowed the drying process but they were eventually gradually reduced and a higher degree of drying could continue. Clay type sludges formed already in the handling round balls and during drying these balls formed a hard dry outer layer, which contained moisture inside the balls. By

  17. Optimization of the secondary drying step in freeze drying using TDLAS technology.

    Science.gov (United States)

    Schneid, Stefan C; Gieseler, Henning; Kessler, William J; Luthra, Suman A; Pikal, Michael J

    2011-03-01

    The secondary drying phase in freeze drying is mostly developed on a trial-and-error basis due to the lack of appropriate noninvasive process analyzers. This study describes for the first time the application of Tunable Diode Laser Absorption Spectroscopy, a spectroscopic and noninvasive sensor for monitoring secondary drying in laboratory-scale freeze drying with the overall purpose of targeting intermediate moisture contents in the product. Bovine serum albumin/sucrose mixtures were used as a model system to imitate high concentrated antibody formulations. First, the rate of water desorption during secondary drying at constant product temperatures (-22 °C, -10 °C, and 0 °C) was investigated for three different shelf temperatures. Residual moisture contents of sampled vials were determined by Karl Fischer titration. An equilibration step was implemented to ensure homogeneous distribution of moisture (within 1%) in all vials. The residual moisture revealed a linear relationship to the water desorption rate for different temperatures, allowing the evaluation of an anchor point from noninvasive flow rate measurements without removal of samples from the freeze dryer. The accuracy of mass flow integration from this anchor point was found to be about 0.5%. In a second step, the concept was successfully tested in a confirmation experiment. Here, good agreement was found for the initial moisture content (anchor point) and the subsequent monitoring and targeting of intermediate moisture contents. The present approach for monitoring secondary drying indicated great potential to find wider application in sterile operations on production scale in pharmaceutical freeze drying. © 2011 American Association of Pharmaceutical Scientists

  18. experimental investigation of the effect of microwave drying and ...

    African Journals Online (AJOL)

    Alayande Ibraheem

    Effect of microwave oven drying and reactor temperature has been investigated in this study. Cassava ... sample was water washed to remove excess alkali metal present through hydrolysis, sun dried and ground to obtain a ... and 2050 [1, 2].

  19. Spray drying of fenofibrate loaded nanostructured lipid carriers

    DEFF Research Database (Denmark)

    Xia, Dengning; Shrestha, Neha; van de Streek, Jacco

    2016-01-01

    content of dry powder decreased with an increase in the ratio of mannitol to trehalose. Lipid nanoparticles were able to retain the drug incorporation and the prolonged drug release profile after spray drying. The experimental model was robust, and suggested that spray drying is a viable technique......The conversion of aqueous dispersion of nanostructured lipid carriers (NLCs) into dry powder by spray drying could be a useful approach to render NLCs with better physical chemical stability than the aqueous dispersion. In this study, aqueous NLC dispersion containing fenofibrate was converted...... into dry, easily reconstitutable powder using spray drying. A central composite face centered design (CCFD) was used to investigate the influence of the ratio of lipid to protectant (mannitol and trehalose) and crystallinity of spray-dried powder on the particle size, yield and residual moisture content...

  20. 29 CFR 1910.161 - Fixed extinguishing systems, dry chemical.

    Science.gov (United States)

    2010-07-01

    ... they are used. (2) The employer may not mix together dry chemical extinguishing agents of different... assure that the dry chemical supply is free of moisture which may cause the supply to cake or form...