WorldWideScience

Sample records for generation avaliacao tecnologica

  1. Technological evaluation of fuel cells using natural gas for distributed power generation; Avaliacao tecnologica da utilizacao de gas natural em celulas a combustivel para geracao distribuida de energia

    Energy Technology Data Exchange (ETDEWEB)

    Brandao, Mauricio O. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-Graduacao de Engenharia (COPPE). Programa de Engenharia Mecanica; Giannini, Marcio P.; Arouca, Mauricio C. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-Graduacao de Engenharia (COPPE). Programa de Planejamento Energetico

    2004-07-01

    The search for sustainable and more rational means of power generation motivates the scientific crew to search for more efficient and cleaner systems. Oil dependence becomes from the kind of development that the humanity had and cannot be dismissed. The question is how to use this source in a more intelligent way. Fuel Cells are electrochemical devices that convert into electric energy the chemical energy from oxi-reduction reactions between a fuel and an oxidant. The current fuel used in a Fuel Cell is hydrogen and oxygen is the oxidant. The great advantage of this device is its efficiency, higher than the one achieved with internal combustion engines. Also Fuel Cells are not limited by Carnot's efficiency. This paper is about the implementation of a distributed generation system using Fuel Cells. Technical aspects are approached together with economical and environmental needs. The already existence of Gas pipelines and the grown production of Natural Gas presented by Brazil turns it into a good market for the implementation of this energy source. The evaluation of this paper shows that is technically possible to use NG in Fuel Cells, mostly in South and Southeast regions, applying the distributed generation of energy concept. The most interesting in a strategic manner is that Brazil already have an indication that it's capable of developing this technology, opening a new market tuning with world's new technological developments. Many research centers develop this technology, not only from the cell composition itself, but also manufacturing techniques. (author)

  2. Power generation with technology innovation of residual biomass utilization; Geracao de energia com inovacao tecnologica de aproveitamento de biomassa residual

    Energy Technology Data Exchange (ETDEWEB)

    Moura, Johnson Pontes de; Selvam, P.V. Pannir [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil)

    2006-07-01

    In the present work, the introduction of alternative energy of biogas in agricultural communities for the sustainable development was studied through exploitation of residual biomass and also getting as by-product the biological fertilizer. A fast composting of the domestic residue with the organic was made possible where part of this residue after processing was taken together with effluent to the biodigester. The bibliographical research on the processes of generation of biogas, about composting and the equipment for processing had been carried through. The projects engineering with the use of computational tools had been developed with the software Super Pro 4,9 Design and ORC GPEC 2004 by our research group. Five case studies had been elaborated, where different scenes related with our innovation, that uses of the residue for the composting together with domestic effluent for digestion. Several economic parameters were obtained and our work proved the viability about the use of biogas for drying of the fruits banana. A economic feasibility study was carried where it was proven that the project with the innovation of the use of residues from the fruits possess more advantages than the conventional system of drying using electric energy. Considering the viability of this process and the use solar energy, it is intended to apply this technology in rural agricultural communities providing them an energy source of low cost in substitution of the conventional energy. (author)

  3. Analysis of technological options for electric energy generation from urban solid wastes; Analise de opcoes tecnologicas para geracao de energia eletrica a partir de residuos solidos urbanos

    Energy Technology Data Exchange (ETDEWEB)

    Furtado, J.G. de M.; Serra, E.T. [Centro de Pesquisas de Energia Eletrica (CEPEL), Rio de Janeiro, RJ (Brazil)], Emails: furtado@cepel.br, etserra@cepel.br

    2010-07-01

    This paper evaluates technologically of the options existents for generation of electric power from the urban solid wastes (USW), based on application of factoring method for estimation of investments based on basic description of the plant, it main equipment and technological complexity, viewing to contribute for determination of better technical and economical form, and the energy using. The results of the effectuated analyses indicates that the most technological complexity of the gasification and thermal plasma, and be encountered on non commercial in great scale as well, make the the option present the greatest index of investment and relative cost, determining the greatest costs of electric power generated through this process.

  4. Proposal of a model for evaluation of research and development projects in a public scientific and technological institution: a survey in CNEN; Proposta de modelo de avaliacao de projetos de pesquisa e desenvolvimento em uma instituicao cientifica e tecnologica publica da area nuclear: um survey na CNEN

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Eduardo de Assumpcao

    2017-11-01

    Science and technology are directly related to the development of a country. The research and development projects in CNEN are financed by the direct resources of the budget of the Union and of the Development Agencies such as FINEP and CNPq. In general, project managers believe they can succeed when they complete a project on schedule, budget, and anticipated requirements, which is commonly known as a 'triple constraint' or 'iron triangle'. However, in the review of the literature, other criteria for evaluating success in projects, such as the benefits generated by society, the development of the team's capabilities, future opportunities, new technologies, among others, were verified. In this way, in order to assist the manager in the evaluation of this type of project, the present research carried out a review in the literature aiming to find concepts about success in projects and their evaluation criteria, proposed a model based on the theoretical reference and Importance and use of these criteria with the CNEN specialists, who work directly in the R and D projects of a public ICT in the nuclear area. The results showed that the criteria proposed in the model have a high degree of importance and show a decrease in the degree of utilization, suggesting that the criteria used in the model can help managers in the evaluation of these projects. (author)

  5. Technological upgrade of static system excitation of a hydraulic generator of 700 Mwats of the Hydroelectric Power Station Guri; Actualizacion tecnologica del sistema de excitacion estatico de un generador hidraulico de 700 MVA de la Central Hidroelectrica de Guri

    Energy Technology Data Exchange (ETDEWEB)

    Contreras, Romy; Guevara, Olivia [C.V.G. Electrificacion del Caroni, C.A. (EDELCA) (Venezuela)

    2004-07-01

    The Generating Units of 700 Mwatts of the Guri Plant from EDELCA are equipped with static excitation systems of analogue technology that using the closure and field's opening switch as a mechanism for the respective processes of excitation and generator dropout. This operational pattern, although functional, has been discontinuing by existing producers because of the inconvenience involved in the management of energy stored in field generator during the dropout. Alternatively, the manufacturers employ a technique of dropout without opening the switch field, based on return to the excitation transformer the energy contained in the field generator. This paper summarizes the EDELCA initiative to upgrade technologically their Generating Units, converting the excitement and dropout switch without opening the field. The project started with a phase of preliminary tests that showed the feasibility of the change and ended with the final implementation of the new scheme in a first unit (Generator n. 15). The results were successful, covering the expectations of the company, so it was decided to continue the project, extending it to the rest of the Generating Units. (author)

  6. Energy generation for sustainable development with innovation technology and utilization of biomass residue; Geracao de energia para o desenvolvimento rural sustentavel com inovacao tecnologica de aproveitamento de biomassa residual

    Energy Technology Data Exchange (ETDEWEB)

    Fernandes, Maria Roseane de Pontes; Lopes, Carlos Eduardo Bezerra; Costa Neto, Manoel Bezerra da; Selvam, P.V. Pannir [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil)

    2004-07-01

    In the present work, the introduction of alternative energy of biogas in agricultural communities for the sustainable development was studied through exploitation of residual biomass and also getting as by-product the biological fertilizer. A fast composting of the domestic residue with the organic was made possible where part of this residue after processing was taken together with effluent to the biodigestor. The bibliographical research on the processes of generation of biogas, about composting and the equipment for processing had been carried through. The projects Engineering with the use of computational tools had been developed with the Software Super Pro 4,9 Design and ORC GPEC 2004 by our research group. Five case studies had been elaborated, where different scenes related with our innovation, that uses of the residue for the composting together with domestic effluent for digestion. Several economic parameters were obtained and our work proved the viability about the use of biogas for drying of the fruits banana. A economic feasibility study was carried where it was proven that the project with the innovation of the use of residues from the fruits possesses more advantages than the conventional system of drying using electric energy. Considering the viability of this process and the use solar energy, it is intended to apply this technology in rural agricultural communities providing them an energy source of low cost in substitution of the conventional energy. (author)

  7. Evaluation of emissions in gas powered electric generator engine with vegetable oil; Avaliacao das emissoes de gases em motor gerador eletrico alimentado com oleo vegetal

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Thalita C. de; Cunha, Joao Paulo Barreto; Cotrim, Suzane Santana; Brito, Gustavo Mendes; Delmond, Josue Gomes [Universidade Estadual de Goias (UNUCET/UEG), Anapolis, GO (Brazil). Unidade Universitaria de Ciencias Exatas e Tecnologicas], E-mail: thalitacarrijo@gmail.com

    2012-11-01

    The use of vegetable oils as fuel in diesel engines is a good alternative to reduce emissions of greenhouse gases in the atmosphere from the use of fossil fuels, either in pure form or as biodiesel. The soybean, oilseed single high-availability in Brazil, is the most viable feedstock for the production of oil and its use as a fuel because of the structure of production, distribution and grain crushing. This study aimed to evaluate the performance of a duty diesel generator fueled with blends of diesel and soybean oil at concentrations of 10%, 25%, 50% and 75%, and soybean oil pure, 100%. During the tests we evaluated the energy consumption of the generator and the emission of greenhouse gases (O{sub 2}, CO, CO{sub 2}, NO{sub x} and SO{sub 2}), according to the demand of electric charges (0, 500, 1000, 1500 and 2000 Watts) connected to the group generator. The results, using the F test, showed that the hourly consumption of fuel increased with increasing concentration in the mixture of diesel fuel and engine load demand from the generator. It follows that in the environment, increasing the oil concentration in the mixture caused a reduction in emissions, except for the emission of oxygen. The best choice for the operation for the engine generator using vegetable oil soya be provided for up to 60 % oil in the mixture and load demand up to 1000W, in which occurred lower emissions of carbon monoxide (CO) and therefore improved efficiency in the combustion process. (author)

  8. Proposal for a technical-economic and environmental evaluation projects for distributed generation; Proposta de avaliacao tecnica-economica-ambiental para projetos de geracao distribuida

    Energy Technology Data Exchange (ETDEWEB)

    Fortes, Marcio Zamboti [Universidade Severino Sombra, Vassouras, RJ (Brazil); Gouvea, Marcos Roberto [Universidade de Sao Paulo (USP), SP (Brazil)

    2008-07-01

    The multi discipline effects in engineering projects, mainly in those of infrastructure, have extended the borders of research to not only evaluate them of the conventional point of view, economic and technical, but also environmental and social. On the other hand, the investor who traditionally searched alternatives only considering the economic and financial performance currently is taken to analyze also the social and environmental aspects. The model described in this paper is a solution proposal to evaluate the merit of an enterprise of distributed generation of thermal origin, considering the economic, social and environmental aspects, using merit indexes that quantify, directly, economic aspects as capital return tax and operating income eliminates, as well as social factors like the impact in the education, health, income and employment rates and still, it verifies the attendance of the environmental restrictions. The solution presented brings a simple and clear form to attribute a merit degree of aggregate to the alternatives to embed distributed generation, considering the intensity of the subjective social responsibility of the investor. The presented model is an important contribution to stimulate a form to evaluate and to prioritize the multi discipline implementation to a distributed generation enterprise, also being able, to be used as financial index or other incentives of the sort. (author)

  9. Combined heat and power generation: encouraged insertion plan systemic appraisal; Cogeracao no setor eletrico: avaliacao sistemica de um plano de insercao incentivada

    Energy Technology Data Exchange (ETDEWEB)

    Paula, Claudio P; Sauer, Ildo L [Universidade de Sao Paulo (USP), SP (Brazil). Inst. de Eletrotecnica e Energia. Programa Interunidades de Pos-Graduacao em Energia

    2004-07-01

    The principal objective of this paper is to evaluate the potential for self-production of combined heat and power - CHP generation - in the expansion of the Brazilian electric power supply system. The potential was determined by simulating operation of CHP plants in industries which had previously used oil derivates to supply process heat, as well as of plants for service sectors, which had consumed electricity for air conditioning. The final part of the thesis describes the policy incentives which should be implemented so that CHP can make a significant contribution at the national level, permitting better use of natural resources and leverage the penetration of natural gas in the energy market, with favorable impacts on national development. (author)

  10. Evaluation of technological alternative for low emission gasoline in PETROBRAS; Avaliacao de alternativas tecnologicas para gasolina de baixa emissao na PETROPBRAS

    Energy Technology Data Exchange (ETDEWEB)

    Gilbert, William Richard [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES). Gerencia de Tecnologia de Catalisadores de FCC - TFCC

    2004-07-01

    More than 30% of the total NO and CO emitted to the atmosphere and up to 20% of the CO{sub 2} are produced by automobiles. New smart fuel injection systems and the three-way catalytic converter in the automobile tail pipes have dramatically reduced NO and CO emissions, but have also required a profound change in gasoline specifications, particularly in the case of sulfur content. In Brazil, the refining of Campos basin heavy crude oils with a high concentration of nitrogen and the gasoline production strongly dependent of the FCC process, have introduced additional challenges. In this work, classic solutions such as FCC feed hydrotreatment, cracked naphta post-treatment, and the use of FCC gasoline sulfur reduction catalyst additives applied to the PETROBRAS scenario will be discussed. Changes to the FCC process to produce future fuels with lower aromaticity and lower emissions in new HCCI motors, which have hybrid characteristics between Diesel and Otto power-trains will also be discussed. (author)

  11. Aeromicrobiology of the central archive of Universidad Pedagogica y Tecnologica de Colombia (Tunja - Boyaca)

    International Nuclear Information System (INIS)

    Toloza Moreno, Deisy Lisseth; Lizarazo Forero, Luz Marina

    2011-01-01

    Air quality of indoor environments can be influenced by different particles suspended in the atmosphere (dust, pollen, bacteria, fungi, and virus) that could cause damage to documents and induce allergic reactions in people working with these documents. in this work, we identified until genera the microorganisms present in the environment of the central archive of Universidad Pedagogica y Tecnologica de Colombia; specifically those that could cause respiratory allergies to personnel of this area. For the environment samples, we used the open petri dish sedimentation method using potato dextrose agar, and measured temperature and relative humidity during each sampling. Also, a survey was taken of the workers to record respiratory symptoms that could arise from handling documents. Samples were taken from the nostrils of some of these workers. Fourteen genera among fungi, yeasts, and bacteria, and two non-identified categories were isolated from the environment. The predominant fungal genera were Mucor spp. and Penicillium spp. with 36.6% and 27.5% of the total of isolated colonies, respectively. Yeast, mainly Rhodotorula genera, and bacteria with prevalence coccus forms were isolated in smaller proportions. There was not statistically significant correlation among the average of colony forming units and the temperature and relative humidity in the environment. In addition, nostril samples yielded only normal Microbiota of the nose, indicating that suggestive respiratory symptoms workers presented are not directly influenced by the presence of fungal spores in the environment at the central archive.

  12. Technological tendencies for the improvement of the performance of combined cycle power stations; Tendencias tecnologicas para el mejoramiento del desempeno de centrales de cilco combinado

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez P, Marino; Garduno R, Raul; Chavez T, Rafael [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2001-07-01

    In this article are dealt some the aspects that have turned the combined cycle generating power stations (CCGPS) into the dominant way for the electrical generation in the world. In the first part it is presented the plan of expansion of the national electrical generation and similar information that the U.S.A. has for the CCGPS, which will give an idea of the importance and the impact that has this technology at the moment. The basic characteristics that are necessary to specify in order to satisfy the environmental and operation requirements, and the available technologies to increase the global efficiency of the CCGPS are also exposed. Finally it describes the evolution of the technology of control for CCGPS developed in the Gerencia de Control e Instrumentacion (GCI), as well as the capacities available to support the electrical sector in this technological discipline. [Spanish] En este articulo se tratan algunos de los aspectos que han convertido a las centrales de generacion de ciclo combinado (CGCC) en el modo dominante para la generacion electrica en el mundo. En la primera parte se presenta el plan de expansion de la generacion electrica nacional e informacion similar que los EE.UU. tienen para las CGCC, lo que dara una idea de la importancia y del impacto que tiene actualmente esta tecnologia. Se exponen tambien las caracteristicas principales que es necesario especificar a fin de satisfacer los requerimientos ambientales y de operacion, y las tecnologias disponibles para incrementar la eficiencia global de las CGCC. Finalmente se describe la evolucion de la tecnologia de control para CGCC desarrollada en la Gerencia de Control e Instrumentacion (GCI), asi como las capacidades disponibles para apoyar al sector electrico en esta disciplina tecnologica.

  13. Technological tendencies and their relation with energy markets; Tendencias tecnologicas y su relacion con mercados de energia

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez Castro, Salvador [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

    1999-07-01

    In this article some associate technological tendencies with areas of interest of the Control Systems Division of the Instituto de Investigaciones Electricas (IIE) are presented. Here the relations or influence that these tendencies have and will continue having in the future with the definition and implantation of energy markets are mentioned. [Spanish] En este articulo se presentan algunas tendencias tecnologicas asociadas con areas de interes de la Division de Sistemas de Control del Instituto de Investigaciones Electricas (IIE). Aqui se mencionan las relaciones o influencia que dichas tendencias tienen y continuaran teniendo en el futuro con la definicion e implantacion de mercados de energia.

  14. Evaluation of specific consumption from the use of chicken oil biodiesel in one cylinder generator set; Avaliacao do consumo especifico a partir da utilizacao de biodiesel de oleo de frango em um grupo-gerador monocilindrico

    Energy Technology Data Exchange (ETDEWEB)

    Fiorese, Diego Augusto [Universidade Federal de Santa Maria (PGEAGRI/UFSM), RS (Brazil). Dept. de Engenharia Rural. Programa de Pos-Graduacao em Engenharia Agricola], E-mail: dafiorese@yahoo.com.br; Lima, Paulo Peruzzo de [Faculdade Assis Gurgacz (FAG), Cascavel, PR (Brazil); Souza, Abel Alves de; Souza, Samuel Nelson Melegari de [Universidade Estadual do Oeste do Parana (UNIOESTE), Cascavel, PR (Brazil). Dept. de Ciencias Exatas e Tecnologicas; Dallmeyer, Arno Udo [Universidade Federal de Santa Maria (PGEAGRI/UFSM), RS (Brazil). Programa de Pos-Graduacao em Engenharia Agricola

    2010-07-01

    Biodiesel can be produced from numerous materials, including by-products of animal chain. In this scenario, the chicken's oil, that is located and an environment not explored for biodiesel production, can be a good alternative in South and Southeast Brazilian Region, where they are slaughtered around 9.100.000 chickens per day. In order to determine the specific consumption from a generator set with single cylinder 6.6 kW of power and generation capacity of 5 kW, using chicken oil biodiesel (B-100), were performed the bench test using a auxiliary tank, precision scale and an energy analyzer. Were conducted four treatments (25%, 50%, 75% and 100% of generating capacity). The worst SC was the engine at 25% of generation capacity (1.5 kW) and better with 75% of maximum load (3.75 kW) with a mean of 479.34 g kWh{sup -1}. By Turkey's test ant 5% probability there was a significant difference only for the first treatment. (author)

  15. The marginal cost of operation: a parameter for evaluating and regulating of the generation work program; O custo marginal de operacao: um parametro para a avaliacao e ajuste do programa de obras de geracao

    Energy Technology Data Exchange (ETDEWEB)

    Lima, W M; Mendes, L N.F.; Almeida Gattass, E de [FURNAS, Rio de Janeiro, RJ (Brazil)

    1990-12-31

    The Brazilian Generator System is predominantly hydroelectric, with some reservoirs having a pluri annual regularization, providing a large storage capacity of potential power for the system. This water storage allows the reduction of the alertly effect from the natural flow over the hydraulic resources for electric power production. Due to this structural characteristic, the main operation problem of the system refers to a strategical determination of storage energy utilization and, consequently, the thermal generation level. This paper examines the theoretical concepts referring to the survey of this operation strategies and analyses the factors for improving. These concepts are also extended for the interconnected electric subsystems case, mainly the interchange effect over the operation strategies of each subsystem. Finally, the natural flow sample influence over the marginal cost is analysed, comparing the obtained values with the historical sample and synthetical series of affluence. (C.G.C.). 7 refs, 2 figs, 5 tabs.

  16. Balanced evaluation of energy systems: development of an integration model between use and energy generation; Avaliacao balanceada de sistemas energeticos: desenvolvimento de um modelo de integracao entre uso e geracao de energia

    Energy Technology Data Exchange (ETDEWEB)

    Marins, Karin Regina de Castro [Universidade do Estado de Sao Paulo, SP (Brazil). Faculdade de Arquitetura e Urbanismo]. E-mail: kmarins@gmail.com

    2006-07-01

    The present theme treats of urban and environment planning through an integrated approach. Developed as master of science dissertation, the project included the development of a balanced evaluation of energy systems, having in mind the efficient, potentialize initiatives of both sides. In the system of 'Energy use' strategies for energy efficiency in residential and commercial buildings from urban, architecture solutions were included. In {sup e}nergy generation{sup ,} urban centralized systems and distributed generation systems were included. Electricity, environmental heating and refrigeration were considered, excepting peaks in the daily consumption. The model involve quantitative evaluation modules and graphical interfaces, giving support to development of project and decision making processes, demonstrating the advantages of the integrated approach.

  17. Economic evaluation of photovoltaic electric power generation connected to the grid in deregulated electric power markets; Avaliacao economica da geracao de energia eletrica fotovoltaica conectada a rede em mercados eletricos desregulados

    Energy Technology Data Exchange (ETDEWEB)

    Zumaran, David Richard Orosco

    2000-12-01

    This work presents an analysis of economic, tariff and regulating issues related to the introduction of Grid Connected Photovoltaic Systems in a deregulated electric market context; a case study for the peruvian electric market is realized. Based on the pricing system of the electric market, it is developed an economic assessment model that can be used by institutions interested in promoting this technology for generating electricity. (author)

  18. Evaluation of capital investment in thermoelectric generation projects in the Brazilian electric sector using the real options theory; Avaliacao de investimento de capital em projetos de geracao termoeletrica no setor eletrico brasileiro usando teoria das opcoes reais

    Energy Technology Data Exchange (ETDEWEB)

    Castro, Alessandro de Lima

    2000-04-01

    In the Brazilian Electric System about 92% of the generated electricity is of hydraulic origin. Today the system is operating practically in the limit of your capacity. Solutions of short time to make possible the expansion of the offer of electricity generation go by the installation of cycle combining thermal using natural gas as fuel. In this dissertation, it was used the real options theory to evaluate generation assets in the Brazilian electricity sector. In Brazil, central operator dispatches a flexible thermal when the electricity spot price is larger than the operation costs. The operation decision is like an European call, where underlying asset is the electricity and the strike price is the operation cost. The value of the capacity is the sum of all decisions to operate the thermal unit, in the remaining life of unit. It was used Monte Carlo Simulation and Dynamic Programming to evaluate this model. The problem is divided in two parts. In the first part, the base case is fixed and evaluated and the expected NPV and project risk are calculated in function of contract level. In the second part, many sensibilities are done in relation to base case. At the end, the value of flexibility is calculated for each contract level. (author)

  19. Improvements in SISCOM II technology; Introduccion de Mejoras Tecnologicas en el SISCOM II

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    This document is the Final Report for the project Introduccion de Mejoras Tecnologicas en el SISCOM II, or Improvements in SISCOM II Technology. It consists of a brief description of the activities carried out during the project, and several Annexes that explain in a deeper way each result. SISCOM II is the main telemetry system currently in use in the Spanish underground coal mining, but it was developed ten years ago and needed a technological update, which was the objective of this project. The aims of the project were: To develop Hardware and Software for the Out stations currently used (maintenance developments) To design new hardware and software, easier to use in the current and new applications of SISCOM II Both objectives were met, although not in the way originally intended. The main results were: In the field of old Out stations update: A new set of boards for the old Out stations was developed Out station's firmware was updated for the new hardware In the field new hardware and software design: SISCOM II Supervision software was completely rewritten, and now runs under Windows 3.11/Windows 95 (Originally it ran under DOS) A new hardware configuration (the RELIA 2000), easier to assembly, install and reconfigured, together with its firmware, was developed Generally speaking the activities were carried out accordingly to the original schedule, with one exception, due to changes in the market of this type of Systems. Because of the changes, which happened by the end of the project's time span, the structure of the new hardware was somehow different to the original design, although its functionality and performance is similar or even better than those of the original one.

  20. Improvements in SISCOM II technology; Introduccion de Mejoras Tecnologicas en el SISCOM II

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    This document is the Final Report for the project Introduccion de Mejoras Tecnologicas en el SISCOM II, or Improvements in SISCOM II Technology. It consists of a brief description of the activities carried out during the project, and several Annexes that explain in a deeper way each result. SISCOM II is the main telemetry system currently in use in the Spanish underground coal mining, but it was developed ten years ago and needed a technological update, which was the objective of this project. The aims of the project were: To develop Hardware and Software for the Out stations currently used (maintenance developments) To design new hardware and software, easier to use in the current and new applications of SISCOM II Both objectives were met, although not in the way originally intended. The main results were: In the field of old Out stations update: A new set of boards for the old Out stations was developed Out station's firmware was updated for the new hardware In the field new hardware and software design: SISCOM II Supervision software was completely rewritten, and now runs under Windows 3.11/Windows 95 (Originally it ran under DOS) A new hardware configuration (the RELIA 2000), easier to assembly, install and reconfigured, together with its firmware, was developed Generally speaking the activities were carried out accordingly to the original schedule, with one exception, due to changes in the market of this type of Systems. Because of the changes, which happened by the end of the project's time span, the structure of the new hardware was somehow different to the original design, although its functionality and performance is similar or even better than those of the original one.

  1. Application of support vector machines in the evaluation of reliability generation and transmission systems; Aplicacao de maquinas de vetores suporte na avaliacao da confiabilidade de sistemas de geracao e transmissao

    Energy Technology Data Exchange (ETDEWEB)

    Dutra, Wellington Damascena; Resende, Leonidas Chaves de [Universidade Federal de Sao Joao Del-Rei (UFSJ), MG (Brazil); Manso, Luiz Antonio da Fonseca; Silva, Armando Martins Leite da [Universidade Federal de Itajuba (UNIFEI), MG (Brazil)

    2010-07-01

    This paper presents a methodology for assessing the reliability indices for composite generation and transmission systems based on Support Vector Machines (SVM). The importance of SVMs is its high generalization ability. The SVMs are used to classify data into two distinct classes. These can be named positive and negative. Thus, the basic idea is to classify the system states into success or failure. For this, a pre-classification of states is achieved by performing the proposed SVM-based neural network, where the sampled states during the beginning of the non-sequential Monte Carlo simulation (MCS) are considered as input data for training and validation sets. By adopting this procedure, a large number of states are classified by a simple evaluation of the network, providing significant reductions in computational costs. The proposed methodology is applied to the IEEE Reliability Test System and to the IEEE Modified Reliability Test System. (author)

  2. Evaluation of area monitor response for neutrons in radiation field generated by a 15 MV clinic accelerator; Avaliacao da resposta dos monitores de area para neutrons em campo de radiacao gerado por um acelerador clinico de 15 MV

    Energy Technology Data Exchange (ETDEWEB)

    Salgado, Ana Paula

    2011-07-01

    The clinical importance and usage of linear accelerators in cancer treatment increased significantly in the last years. Coupled with this growth came the concern about the use of accelerators with energies over to 10 MeV which produce therapeutic beam contaminated with neutrons generated when high-energy photons interact with high-atomic-number materials such as tungsten and lead present in the accelerator itself. At these facilities, measurements of the ambient dose equivalent for neutrons present difficulties owing to the existence of a mixed radiation field and possible electromagnetic interference near the accelerator. The Neutron Laboratory of the IRD - Brazilian Institute for Radioprotection and Dosimetry, aiming to evaluate the survey meters performance at these facilities, initiated studies of instrumentation response in the presence of different neutron spectra. Neutrons sources with average energies ranging from 0.55 to 4.2 MeV, four different survey meters and one ionization chamber to obtain the ratio between the dose due to neutrons and gamma radiation were used in this work. The evaluation of these measurements, performed in a 15 MV linear accelerator room is presented. This work presents results that demonstrate the complexity and care needed to make neutrons measurements in radiotherapy treatment rooms containing high energy clinical accelerators. (author)

  3. Evaluation of technological properties of alumina refractory systems-zirconia and zirconia-silica-alumina; Avaliacao das propriedades tecnologicas de refratarios dos sistemas alumina-zirconia e alumina-zirconia-silica

    Energy Technology Data Exchange (ETDEWEB)

    Marinho, A.R.O.; Carvalho, T.U.S.; Fagury Neto, E.; Rabelo, A.A., E-mail: adriano@unifesspa.edu.br [Universidade Federal do Sul e Sudeste do Para (UFSSPA), Maraba, PA (Brazil)

    2014-07-01

    Alumina-zirconia refractories are noted for being products of excellent cost-effective, however, zirconia may limit its use due to decreasing resistance to thermal shock. This study aims to evaluate these refractories with the addition of microsilica, which can greatly improve their properties. Were used the following starting materials: calcined alumina, zirconia (stabilized and monoclinic) in amounts of 2%, 4% and 6% by weight, plus microsilica (5%w.). The powders were milled together with binder and lubricant for conformation bodies by uniaxial pressing. The samples were dried, calcined and sintered at 1400 °C/2h were characterized using the methods of Archimedes, and scanning electron microscopy (SEM), chemical analysis using energy dispersive X-ray (EDS), and mechanical flexural strength tests at room temperature. Formulations with the presence of microsilica showed satisfactory results and optimized properties. (author)

  4. 1997 Annual report. Technological Research Direction; Informe Anual 1997. Direccion de Investigacion Tecnologica

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-01

    This document describes the results for one year of work. Here is presented the goals of the Technological Research Direction of the National Institute of Nuclear Research in Mexico, which is promoting and developing the production of high technologies in the nuclear sciences and related disciplines as well as to generate the technologies, products, quality insume for academic organizations, health, industrial and commercial that are required. (Author)

  5. Technological properties of kaolin from Para; Propriedades tecnologicas do caulin do Para

    Energy Technology Data Exchange (ETDEWEB)

    Hildebrando, E.; Martin-Cortes, G.R.; Esper, F.J.; Wiebeck, H.; Alves Junior, P.; Valenzuela-Diaz, F.R., E-mail: germac@usp.br [Universidade de Sao Paulo (PMT/EP/USP), Sao Paulo, SP (Brazil). Escola Politecnica. Departamento de Engenharia Metalurgica e de Materiais

    2011-07-01

    The NE of the State of Para, is notable for its large reserves of kaolin for paper. Kaolin is a mineral composed of hydrated aluminum silicates such as kaolinite and halloysite. The exploitation of these reserves to generate products with higher commercial value, especially in the industries of adsorbents and catalysts, is what motivates the continuous study of technological properties of the Amazon kaolin's. Thus, this paper presents a technological characterization of a sample of kaolin from Para State by X-ray diffraction, SEM - scanning electron microscopy and infrared spectroscopy. The results of preliminary tests indicate that the sample consists for the most part by kaolinite present in low concentrations of quartz and anatase. (author)

  6. Il progetto “iVincoli” del Politecnico di Torino. Aspetti di innovazione tecnologica e digitale a supporto del processo di riforma della Pubblica Amministrazione

    Directory of Open Access Journals (Sweden)

    Cristina Coscia

    2011-12-01

    Full Text Available Nello scritto si illustra l’esperienza condotta dal Politecnico di Torino nel 2007 - su istanza della Direzione Regionale per i Beni Culturali e Paesaggistici del Piemonte - denominata “Progetto iVincoli” (2007-2008: l’esito, nella sua versione prototipale, è la configurazione e realizzazione di una piattaforma tecnologica predisposta per la definizione di linee-guida destinate al monitoraggio e alla pubblicazione on line delle attività vincolistiche. Tale SIT ad accesso multiprofilo consente, tra le funzionalità previste: la consultazione pubblica delle informazioni relative agli edifici monitorati anche sottoposti a vincolo di tutela; il monitoraggio dell’iter delle pratiche di vincolo da parte della Direzione Regionale, degli Enti Locali e dei soggetti privati coinvolti, denominato “work flow delle pratiche amministrative”; la creazione di specifici percorsi tematici di tipo turistico. Tale esperienza parte da una precisa premessa: ogni architettura informativa a servizio di atti e processi della Pubblica Amministrazione viene a configurarsi quale strumento prototipale di supporto alla riforma della stessa PA e alla governance. A fronte di tali ragionamenti, le Pubbliche Amministrazioni al momento attuale si stanno confrontando, da una parte, con i processi e i dibattiti in corso sul trasferimento delle funzioni centrali; dall’altra, per l’aspetto di innovazione tecnologica con le direttive introdotte a partire dal Codice Unico della Pubblica Amministrazione Digitale. Di fatto, uno dei tasselli per la messa a punto di atti che innestino sinergie tra innovazione, efficienza amministrativa e gestione del territorio per una sua valorizzazione è costituito da processi d’implementazione di architetture informative configurate in SIT. In tale logica, il progetto “iVincoli” si incardina tra le attività dell’Osservatorio Immobiliare della Città di Torino (OICT, che rappresenta uno strumento attraverso cui innescare

  7. Projection of primary energy in electricity generation with evaluation of demand and supply of energy in the medium-term horizon (2020), long-term (2035) and very long term (2060); Projecao das energias primarias na geracao de eletricidade com avaliacao da demanda e oferta de energia, em horizonte de medio prazo (2020), longo prazo (2035) e muito longo prazo (2060)

    Energy Technology Data Exchange (ETDEWEB)

    Mafra, Olga Y.; Alvim, Carlos Feu; Eidelman, Frida [Brasil e Economia (Brazil); Guimaraes, Leonam dos Santos [Eletrobras Eletronuclear, Rio de Janeiro, RJ (Brazil)

    2013-01-15

    The Global Energy demand and the participation of electricity in scenarios of medium (2020), long (2035) and very long (2060) terms are estimated. It is also evaluated the share of different primary energies in electricity generation and their availability in the country. Three economic scenarios were considered and different hypothesis regarding the participation of nuclear energy were analyzed. (author)

  8. Oil generation potential assessment and paleoenvironmental interpretation based on bio markers and stable carbon isotopes of the Pliensbachian - lower Toarcian (Lower Jurassic) of the Peniche region (Lusitanian Basin, Portugal); Avaliacao do potencial gerador de petroleo e interpretacao paleoambiental com base em biomarcadores e isotopos estaveis de carbono da secao Pliensbaquiano - Toarciano inferior (Jurassico Inferior) da regiao de Peniche (Bacia Lusitanica, Portugal)

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Luiz Carlos Veiga de; Rodrigues, Rene; Duarte, Luis Vitor; Lemos, Valesca Brasil [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES). Gerencia de Bioestratigrafia e Paleoecologia]. E-mail: lcveiga@petrobras.com.br

    2006-05-15

    The Lusitanian Basin (Portugal) is located on the western margin of the Iberian Plate with maximum sedimentary thickness around 5 km. In spite of containing promising petroleum systems and more than a hundred wells, its hydrocarbon generation potential has not been fully evaluated yet. These sediments range from upper Triassic to upper Cretaceous, mainly from the Jurassic age. The Lower Jurassic is particularly well represented in the Lusitanian Basin, specifically in the Peniche region, where there are more than 450 m thick outcrops of carbonate rocks aged between Sinemurian and Toarcian. This study presents the evaluation of the hydrocarbon generation potential of the Pliensbachian . lower Toarcian of the Peniche section; which includes the Vale das Fontes Formation, Lemede Formation and Cabo Carvoeiro Formation (CC1 and CC2 members) based on 233 rock samples analyzed for total organic carbon (TOC), Rock-Eval pyrolysis and bio markers. Available data of oxygen and carbon stable isotopes were also used in the paleoenvironmental interpretation. Marls and limestones with the bituminous facies (Mlbf) of the Vale das Fontes Formation, present the highest TOC values, up to 14.95%, corresponding to the ibex (upper part), davoei and margaritatus ammonites zones and part of the NJ4a and NJ4b nanno fossils bio zones (Pliensbachian). In thermal immature sections (T max about 430 deg C), this member also shows high S{sub 2} values (10 to 50 mgHC/g rock) and Hydrogen index (HI: 200 to 555 mgHC/g TOC). The correlation between HI x OI shows that type II kerogen is predominant in the portion of the section where TOC values are higher. The good positive correlation between TOC values and the bio markers ratio P/nC17 and sterane (C{sub 27}/C{sub 29}) throughout the Mlbf Member suggests a gradual increase of anoxia and higher contribution of algae in relation to terrestrial organic matter. Usually {delta}{sup 18}O variations observed in the basins of the Iberian Peninsula have been

  9. 5 December 2011 - Chilean President of the Comision Nacional de Investigacion Cientifica y Tecnologica J. M. Aguilera in the ATLAS visitor centre with Adviser J. Salicio Diez and ATLAS Collaboration G. Mikenberg; signing the guest book with Head of International Relations F. Pauss; visiting the LHC superconducting magnet test hall with Department Head F. Bordry.

    CERN Multimedia

    VMO Team

    2011-01-01

    5 December 2011 - Chilean President of the Comision Nacional de Investigacion Cientifica y Tecnologica J. M. Aguilera in the ATLAS visitor centre with Adviser J. Salicio Diez and ATLAS Collaboration G. Mikenberg; signing the guest book with Head of International Relations F. Pauss; visiting the LHC superconducting magnet test hall with Department Head F. Bordry.

  10. Difficulties for innovation in energy technology development: thermoelectric generation with vegetable oils; As dificuldades para a inovacao em rotas tecnologicas de desenvolvimento energetico: geracao termeletica com oleos vegetais

    Energy Technology Data Exchange (ETDEWEB)

    Melo, Jose Antonio Sales de [Universidade de Brasilia (UNB-CDS), DF (Brazil). Centro de Desenvolvimento Sustentavel

    2008-07-01

    Analysis of the vegetable oil as energy source, observing the troubles caused by technology innovation insertion in the Brazilian Electrical Matrix by the use of renewable alternative energy sources while competing with the products and systems' market leaders that use fossil sources. (author)

  11. Technological innovation and sustainable development: The experience of Italian companies; Innovazione tecnologica e sviluppo sostenibile: le esperienze delle imprese italiane

    Energy Technology Data Exchange (ETDEWEB)

    Malaman, R. [Istituto per la Ricerca Sociale, Milan (Italy)]|[Fondazione Eni Enrico Mattei, Milan (Italy)

    1995-12-01

    Nearly 200 case studies of cleaner innovation technologies developed or adopted by Italian companies have been analysed after the building of an appropriate database. The article summarises the results of this analysis. Initially, the concept of cleaner technologies is introduced, and theoretical aspects related to generation and diffusion of cleaner technologies are discussed, including obstacles to the development, technological opportunities, market demand and appropriate conditions. Then, some features of cleaner innovative technologies are analysed from the database: localisation, size and sectorial distribution of innovative companies. evolutive stage of companies behaviour, the role of environmental policy, the capabilities of the national innovative system, the distribution of change technologies according to Pavitt`s tassonomy. The final paragraph includes some reflection on the use of innovation policy to promote cleaner innovative technologies.

  12. Technological evolution of main critical processes used in COMPERJ; Evolucao tecnologica dos principais processos criticos utilizados no COMPERJ

    Energy Technology Data Exchange (ETDEWEB)

    Pereira, Roberta A. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Escola de Quimica; Construtora Norberto Odebrecht, Rio de Janeiro, RJ (Brazil); Seidl, Peter; Guimaraes, Maria Jose O.C. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Escola de Quimica

    2008-07-01

    Considered key to the country, the Petrochemical Complex in Rio de Janeiro (COMPERJ) will provide significant benefits to the Brazilian industry, such as production, a large-scale petrochemical raw materials, due to bigger and better processing of heavy oil national, especially the field of Marlim. The deployment of this complex aggregate value to the national economy, due to replace the export of heavy oil, lower market value, the export of products of higher added value to be produced in the complex. The integration refining-petrochemistry that occur in COMPERJ facilitate critical processes, such as atmospheric distillation, vacuum distillation, Petrochemical FCC and polymerization processes. This venture will take in the same plant, a Basic Petrochemical Unit (UPB) and a number of Petrochemical Associates units (UPA's), where in the first generation, the UPB will produce ethylene and propylene and in the second generation, the UPA's will convert the basic petrochemical in resins such as polypropylene, polyethylene, styrene, among others. The technology of PETROBRAS in relation to processes cited previously, has made many progress in recent years and the result of this development can be seen by increasing of patent number in the technical area. The analysis of technological evolution of these processes is of extreme importance for the identification of innovation trends of Brazil in relation to other countries to confirm the great potential of the Research Center of PETROBRAS with regard to these processes. Thus, this work aims to make an analysis of the technological developments of the main critical processes that will occur in COMPERJ and their integration refining-petrochemistry, identifying the various innovations regarding these processes. (author)

  13. Estimation of the resource and technological prospective of biomass as renewable energy in Mexico (Annexe 2 in 'A vision of year 2030 on the use of the renewable energies in Mexico'); Estimacion del recurso y prospectiva tecnologica de la biomasa como energetico renovable en Mexico (Anexo 2 en 'Una vision al 2030 de la utilizacion de las energias renovables en Mexico')

    Energy Technology Data Exchange (ETDEWEB)

    Masera, Omar R [Centro de Investigaciones en Ecosistemas, Universidad Nacional Autonoma de Mexico, D.F.(Mexico); Agullon, Javier; Gamino, Benjamin [Instituto de Ingenieria, Universidad Nacional Autonoma de Mexico, D.F.(Mexico)

    2005-08-15

    The work that next appears is a first effort towards the estimation of the resource and technological prospective of the biomass energy as renewable energy in Mexico. It tries to give an overview considering the present situation of energy plantations, production of alcohol from biomass as well as of the production of agricultural remainders, at worldwide scale as well as in our country. The report includes very general estimations of the of biomass resource, production costs, technological analyses, costs of investment and production of energy and technological prospective to 25 years in each one of the previously mentioned headings. [Spanish] El trabajo que a continuacion se presenta es un primer esfuerzo hacia la estimacion del recurso y prospectiva tecnologica de la biomasa como energetico renovable en Mexico. Pretende dar un panorama general estimando la situacion actual de plantaciones energeticas, de produccion de alcoholes a partir de biomasa asi como de produccion de residuos agricolas, tanto a escala mundial como en nuestro pais. El informe abarca estimaciones muy generales del recurso de biomasa, costos de produccion, analisis tecnologicos, costos de inversion y de produccion de energia y prospectiva tecnologica a 25 anos en cada uno de los rubros mencionados anteriormente.

  14. Technological alternatives for the handling of high viscosity heavy crude oil and of petroleum residuals; Alternativas tecnologicas para el manejo de crudos pesados de alta viscosidad y residuales de petroleo

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez S, Ramon; Peralta M, Maria Vita; Gonzalez Santalo, Jose M; Herrera V, J Ramon; Arriola M, Alejandro M; Manzanares P, Emilio; Romo M, Cesar A; Palacios L, Elvia M [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2006-07-01

    This work presents the technological capacity that, through the years, has been developed in emulsions of heavy oil in water preparations, as well as the potential application that this technology has in the electrical sector and the problem reduction during the extraction and handling of high viscosity heavy oils. Within this technological development it first appears the process for the formation of emulsions of residual petroleum within lots, followed by the preparation of emulsions in a continuous way within a laboratory model, and finally the production in greater scale in a pilot plant, including more and more adequate tense-actives for the formation of emulsions. Also experimental systems are presented to execute static stability and dynamic tests in different conditions, pumping tests for the handling of these emulsions and burning tests for their combustion. All of this with the purpose of consolidating the technology of residual petroleum emulsions as a profitable alternative that replaces the heavy fuel oil and to solve specific problems of the oil industry, among other benefits. [Spanish] Este trabajo exhibe la capacidad tecnologica que, a traves de los anos, se ha desarrollado en la preparacion de emulsiones de aceites pesados en agua; asi como el potencial de aplicacion que tiene dicha tecnologia en el sector electrico y la reduccion de problemas durante la extraccion y manejo de aceites pesados de alta viscosidad. Dentro de este desarrollo tecnologico figura primero el proceso para la formacion de emulsiones de residuales de petroleo dentro de lotes, seguido por la preparacion de emulsiones en continuo dentro de un laboratorio modelo, y finalmente la produccion a mayor escala en una planta piloto, incluyendo cada vez mas adecuados tenso-activos para la formacion de las emulsiones. Tambien se presentan sistemas experimentales para ejecutar pruebas de estabilidad estatica y dinamica en diferentes condiciones, pruebas de bombeo para el manejo de estas

  15. Exploitation of marine renewable energies as technology option of future; El aprovechamiento de las energias renovables marinas como opcion tecnologica de futuro

    Energy Technology Data Exchange (ETDEWEB)

    Nunez Rivas, L. R.

    2012-07-01

    In this paper is shown one description of the marine renewable energetic resources mean in our days. It begins with the definition of all these energetic resources and also with their analysis, showing their characteristics and the technological capacity that now exist for their exploitation. And in the second part of the article it shows the next evolution of the technology that will be demand for the development of the new generation park that will see the light in a very short future and over structures, ships and ports. At the end, there is one paragraph with the Conclusions that was necessary to do. (Author)

  16. Research, development and technological innovation of wind turbine control systems; Investigacion, desarrollo e innovacion tecnologica de sistemas de control de aerogeneradores

    Energy Technology Data Exchange (ETDEWEB)

    Garduno Ramirez, Raul; Rodriguez Martinez, Arnulfo Antelmo; Sanchez Parra, Marino; Martinez Morales, Miguel Angel; Hernandez Cuellar, Maria Aurora; Alcaide Godinez, Indira Xochiquetzal; Re Lopez, Victor Genaro; Hernandez Gonzalez, Roberto [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2012-07-01

    Control systems constitute the brain and the nervous system of modern machines, such as wind turbine generators (TGE by its acronym in Spanish). TGEs can work efficiently, safely and almost autonomously, thanks to the control systems with which they are equipped. Conversely, any malfunctioning of the control system may cause failure or damage of a component, a subsystem or even destruction of the TGE itself. This paper introduces some basic facts about generation of electric power from wind energy in the world and Mexico, wind turbogenerators and their most relevant technologies, TGE control systems, and R and TD+I about TGE control systems performed at the Instituto de Investigaciones Electricas. [Spanish] Los sistemas de control constituyen el cerebro y el sistema nervioso de las maquinas modernas, como aerogeneradores (AG). Los AG pueden trabajar eficiente, segura y casi autonomamente, gracias a los sistemas de control con los que estan equipados. De manera inversa, cualquier mal funcionamiento del sistema de control puede provocar falla o dano de un componente, subsistema o incluso la destruccion del propio AG. Este documento introduce algunos hechos basicos en torno a la generacion de energia electrica a partir de energia eolica en el mundo y Mexico, los aerogeneradores y sus tecnologias mas importantes, sistemas de control de AG e I+DT alrededor de los sistemas de control de AG realizados en el Instituto de Investigaciones Electricas.

  17. Analysis of Technological Competitiveness for Rural Electrification in the Municipality of Ensenada, Mexico; Analisis de Competitividad Tecnologica para la Electrificacin Rural del Municipio de Ensenada, Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Corral Osuna, B. C.; Dominguez Bravo, J.; Serrano Cambronero, M.

    2013-07-01

    In this paper, we present an technological competitiveness analysis for six electricity generation systems conventional and renewable, in order to obtain a proposal for electrification to the rural locations in the municipality of Ensenada, at Northwest of Mexico. To do this, we use the software IntiGIS a Geographic Information System (GIS) that allows multi-criteria analysis using: technical, economic, geographic and socio-demographic variables. Ensenada is located in a Mexican state away from the national electric network; and its regional electrical grid is concentrated on a small land area at north having about fifteen hundred rural villages scattered without electricity in the center and south. Therefore, we perform this work in order to provide elements for decision making of subsequent initiatives aimed to solve this lack of basic services. (Author)

  18. Proceedings of the 11. Brazilian congress on energy; 1. Brazilian seminar on technological innovation in energy sector. Technological innovation and sustainable development; Anais do 11. Congresso brasileiro de energia; 1. Seminario brasileiro de inovacao tecnologica no setor energetico. Inovacao tecnologica e desenvolvimento sustentavel

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    Theoretical papers are presented in this congress, comprising the following subjects: energy supply logistic, energy distributed generation, energy and environment, renewable energy sources, petroleum and natural gas, politics and technological management, energy efficiency, norms, quality and regulation, nuclear energy.

  19. Estimation of the resource and technological prospective of biomass as renewable energy in Mexico (Annexe 2 in 'A vision of year 2030 on the use of the renewable energies in Mexico'); Estimacion del recurso y prospectiva tecnologica de la biomasa como energetico renovable en Mexico (Anexo 2 en 'Una vision al 2030 de la utilizacion de las energias renovables en Mexico')

    Energy Technology Data Exchange (ETDEWEB)

    Masera, Omar R [Centro de Investigaciones en Ecosistemas, Universidad Nacional Autonoma de Mexico, D.F.(Mexico); Agullon, Javier; Gamino, Benjamin [Instituto de Ingenieria, Universidad Nacional Autonoma de Mexico, D.F.(Mexico)

    2005-08-15

    The work that next appears is a first effort towards the estimation of the resource and technological prospective of the biomass energy as renewable energy in Mexico. It tries to give an overview considering the present situation of energy plantations, production of alcohol from biomass as well as of the production of agricultural remainders, at worldwide scale as well as in our country. The report includes very general estimations of the of biomass resource, production costs, technological analyses, costs of investment and production of energy and technological prospective to 25 years in each one of the previously mentioned headings. [Spanish] El trabajo que a continuacion se presenta es un primer esfuerzo hacia la estimacion del recurso y prospectiva tecnologica de la biomasa como energetico renovable en Mexico. Pretende dar un panorama general estimando la situacion actual de plantaciones energeticas, de produccion de alcoholes a partir de biomasa asi como de produccion de residuos agricolas, tanto a escala mundial como en nuestro pais. El informe abarca estimaciones muy generales del recurso de biomasa, costos de produccion, analisis tecnologicos, costos de inversion y de produccion de energia y prospectiva tecnologica a 25 anos en cada uno de los rubros mencionados anteriormente.

  20. Algorithms evaluation for transformers differential protection; Avaliacao de algoritmos para protecao diferencial de transformadores

    Energy Technology Data Exchange (ETDEWEB)

    Piovesan, Luis Sergio

    1997-07-01

    The appliance of two algorithms is evaluated, one based in Fourier analysis and other based in a rectangular transform technique over Fourier analysis, to be used in digital logical circuits (digital protection relays) for the purpose of differential protection of power transformers (ANSI 87T). The first chapter has a brief introduction about electrical protection. The second chapter discusses the general problems of transform protection, the development of digital technology and, with more detail, the differential protection associated to this technology. In this chapter are presented the particular aspects of transformers differential protection concerning sensibility, inrush current situations and harmonic distortions caused by transformer core saturations and the differential protection algorithms and their applications in a specific relay design. In chapter three, a method to make possible testing the protection performance is developed. This work applies digital simulations using EMTP to generate current signal of transformer operation and fault conditions. Digital simulation using Matlab is used to simulate the protection. The EMTP generated field signals are sent to the relay under test, furnishing data of normal operation, internal and external faults. The relay logic simulator at Matlab will work this data and so, it will be possible to verify and evaluate the algorithm behavior and performance. Chapter 4 shows the protection operation over simulations of several of transformer operation and fault conditions. The last chapter presents a conclusion about the protection performance, discussions about all the methods applied in this work and suggestions for further studies. (author)

  1. Microhardness evaluation alloys Hf-Si-B; Avaliacao de microdureza de ligas Hf-Si-B

    Energy Technology Data Exchange (ETDEWEB)

    Gigolotti, Joao Carlos Janio; Costa, Eliane Fernandes Brasil [Centro Universitario de Volta Redonda (UNIFOA), Volta Redonda, RJ (Brazil); Nunes, Carlos Angelo; Rocha, Elisa Gombio; Coelho, Gilberto Carvalho, E-mail: carlosjanio@uol.com.br, E-mail: eliane-costabrasi@hotmail.com, E-mail: cnunes@demar.eel.usp.br, E-mail: elisarocha@alunos.eel.usp.br, E-mail: coelho@demar.eel.usp.br [Universidade de Sao Paulo (USP), Lorena, SP (Brazil)

    2014-08-15

    The technological advance has generated increasing demand for materials that can be used under high temperature, what includes intermetallic MR-Si-B (MR = refractory metal) alloys with multiphase structures, that can also be applied in oxide environments. Thus, this work had for objective the micro hardness study of the Hf-Si-B system alloys, heat treated at 1600 deg C, in the Hf rich region. Hf-Si-B alloys had been produced with blades of Hf (min. 99.8%), Si (min. 99.998%) and B (min. 99.5%), in the voltaic arc furnace and heat treated at 1600 deg C under argon atmosphere. The relationship of the phases had been previously identified by X-ray diffraction and contrast in backscattered electron imaging mode. The alloys had their hardness analyzed by method Vickers (micro hardness) with load of 0.05 kgf and 0.2 kgf and application time of 20 s. The results, obtained from the arithmetic mean of measurements for each alloy on the heterogeneous region, showed a mean hardness of 11.08 GPA, with small coefficient of variation of 3.8%. The borides HfB2 (19.34 GPa) e HfB - 11.76 GPa, showed the hardness higher than the silicides Hf2Si (8.57 GPa), Hf5Si3 (9.63 GPa), Hf3Si2 (11.66 GPa), Hf5Si4 (10.00 GPa), HfSi (10.02 GPa) e HfSi2 (8.61 GPa). (author)

  2. L’innovazione tecnologica nella scuola: come perseguire un’innovazione tecnologica sostenibile ed efficace

    Directory of Open Access Journals (Sweden)

    Antonio Calvani

    2013-12-01

    Full Text Available Starting out from the document drawn up by OECD on the Italian “Digital School” project for the introduction of technological innovation in schools, the author discusses the criteria to which innovation policies based on the principles of sustainability and maximum pedagogical impact should be subject, in an Evidence Based Education perspective. Historically we tend to overestimate the positive effects of technology on learning, while research has already highlighted their limitations, which are restricted to specific areas, at the same time pointing to the risks related to consequent cognitive overload. Suggestions for decision makers are made, underlining the need to recover the educational relationship with easy technologies, take into account the cognitive balance between reading paper and digital reading and finalize well the use of technology for achieving specific objectives.

  3. The electric power generation in Mexico and its environmental impacts: Past, present and future; La generacion electrica en Mexico y sus impactos ambientales: Pasado, presente y futuro

    Energy Technology Data Exchange (ETDEWEB)

    Quintanilla Martinez, Juan [Programa Universitario de Energia (PUE), Universidad Nacional Autonoma de Mexico (UNAM), Mexico, D. F. (Mexico)

    1997-12-31

    The purpose of this paper is to analyze the historical evolution, past and present of the installed capacity and of the electric power generation, as well as the fuel consumption and the associated green-house gases emission. Also, under the technique of economic scenarios and future towns (in short and mediate terms) the potential needs of installed capacity, generation, mix and fuel consumption and associated green gases emissions is analyzed. Later on a comment is made on the energy implications of the substitution of fuels policies and the environmental Standards. Finally, a series of comments is established on the possible technological directions for the sector, from the stand point of generation efficiency and its effects in the reduction of emissions [Espanol] El proposito del presente trabajo es analizar la evolucion historica, pasada y presente, de la capacidad instalada y de la generacion electrica, asi como el consumo de combustibles y las emisiones de gases de invernadero asociadas. Tambien se analiza bajo la tecnica de escenarios economicos y poblaciones a futuro (en el corto y mediano plazo) las posibles necesidades de capacidad instalada, generacion, mezcla y consumo de combustibles y emisiones de gases de invernadero asociadas. Posteriormente se comenta sobre las implicaciones energeticas de las politicas de sustitucion de combustibles y estandares ambientales. Por ultimo se establecen una serie de comentarios sobre las posibles direcciones tecnologicas para el sector, desde el punto de vista de la eficiencia de generacion y sus efectos en la reduccion de las emisiones

  4. Life-cycle optimization model for distributed generation in buildings

    Science.gov (United States)

    Safaei, Amir

    O setor da construcao e responsavel por uma grande parte do consumo de energia e emissoes na Uniao Europeia. A Geracao Distribuida (GD) de energia, nomeadamente atraves de sistemas de cogeracao e tecnologias solares, representa um papel importante no futuro energetico deste setor. A otimizacao do funcionamento dos sistemas de cogeracao e uma tarefa complexa, devido as diversas variaveis em jogo, designadamente: os diferentes tipos de necessidades energeticas (eletricidade, aquecimento e arrefecimento), os precos dinamicos dos combustiveis (gas natural) e da eletricidade, e os custos fixos e variaveis dos diferentes sistemas de GD. Tal torna-se mais complexo considerando a natureza flutuante das tecnologias solares termicas e fotovoltaicas. Ao mesmo tempo, a liberalizacao do mercado da eletricidade permite exportar para a rede, a electricidade gerada localmente. Adicionalmente, a operacao estrategica de um sistema de GD deve atender aos quadros politicos nacionais, se tiver como objetivo beneficiar de tais regimes. Alem disso, considerando os elevados impactes ambientais do setor da construcao, qualquer avaliacao energetica de edificios rigorosa deve tambem integrar aspetos ambientais, utilizando uma abordagem de Ciclo de Vida (CV). Uma avaliacao de Ciclo de Vida (ACV) completa de um sistema de GD deve incluir as fases relativas a operacao e construcao do sistema, bem como os impactes associados a producao dos combustiveis. Foram analisadas as emissoes da producao de GN, as quais variam de acordo com a origem, tipo (convencional ou nao-convencional), e estado (na forma de GN Liquefeito (GNL) ou gas). Do mesmo modo, o impacte dos sistemas solares e afetado pela meteorologia e radiacao solar, de acordo com a sua localizacao geografica. Sendo assim, uma avaliacao adequada dos sistemas de GD exige um modelo de ACV adequado a localizacao geografica (Portugal), integrando tambem a producao de combustivel (GN), tendo em conta as suas diferentes fontes de abastecimento. O

  5. ESTUDIO COMPARATIVO SOBRE COMPETENCIAS GENERICAS EN MODALIDAD PRESENCIAL Y VIRTUAL EN UN CURSO DE PREGRADO DE LA UNIVERSIDAD TECNOLÓGICA DE PANAMÁ (COMPARATIVE STUDY ABOUT COMPETENCES IN CLASSROOM AND ON LINE EDUCATION IN AN UNDERGRADUATE COURSE AT UNIVERSIDAD TECNOLOGICA DE PANAMA

    Directory of Open Access Journals (Sweden)

    Durán Rodríguez, Rodrigo

    2012-05-01

    Full Text Available Resumen: El presente artículo describe el estudio comparativo entre modalidades presencial y virtual de dieciocho competencias genéricas del modelo de competencias Alfa Tuning de Latinoamérica. El estudio se realizó con estudiantes de Licenciatura en Redes y Comunicaciones de la Universidad Tecnológica de Panamá, quienes participaron en un proceso de investigación que los involucraba a prácticas presenciales y a prácticas virtuales. Los resultados revelaron las diferencias existentes al momento de implementar un mecanismo que introduce competencias a través de medios presenciales versus medios virtuales. Se observó que la mayoría de las competencias genéricas mantienen el mismo nivel de desarrollo en ambas modalidades y que además un 44% de las competencias genéricas obtienen un mejor nivel de consecución en la modalidad virtual y un 6% de las competencias genéricas lograron una mejor evaluación en la modalidad presencial. El estudio concluye que las competencias genéricas según Alfa Tuning se pueden desarrollar tanto en los entornos virtuales de aprendizaje como en el tradicional salón de clases, lo que apunta a que ambas opciones pueden ser empleadas por las universidades cuando se diseñan este tipo de curriculum.Abstract: This paper describes a comparative study of eighteen generic skills from Latin America Alfa Tuning project applied in a case using classroom and virtual education. The study was conducted with students of Bachelor of Communications Networks registered at Universidad Tecnologica de Panama, whom participated in a research process that were subjected to virtual and classroom practices. The results revealed differences when implementing a mechanism to introduce competences through means-face versus virtual means. It was observed that most of the generic competences maintain the same level of development in both types of education and also 44% of generic competences get better level of achievement in virtual

  6. Generating Units

    Data.gov (United States)

    Department of Homeland Security — Generating Units are any combination of physically connected generators, reactors, boilers, combustion turbines, and other prime movers operated together to produce...

  7. Technological tendencies for the development and implementation of fault tolerant active controls in combined cycle power plants; Tendencias tecnologicas para el desarrollo e implantacion de controles activos tolerantes a fallas en centrales de ciclo combinado

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez P, Marino; Verde R, Cristina [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2006-07-01

    This document proposes a methodology that reunites support tools for the operator of a Combined Cycle Generating Power Station allowing him to identify and to classify gas turbine faults, it also reunites some tools for the generation of action advices in the decision making on the operation maneuvers necessary to counteract the effects caused by faults. We are talking about a system implemented in a power station with the reconfiguration of processes and fault arrangement capacities. For this purpose, the line of exhibition delimits first the existing knowledge on automatic control and operations supervision systems in a CCPP and immediately emphasizes the cracks of the system to let pass to the fault tolerant active control system that will detect faults of the gas and steam turbo-generators of a Combined Cycle Generating Power Plant. [Spanish] El presente documento propone una metodologia que reuna herramientas de ayuda al operador de una Central Generadora de Electricidad de Ciclo Combinado para permitirle la identificacion y clasificacion de fallas en las turbinas de gas, asi como herramientas para la generacion de consejos de accion en la toma de decisiones sobre las maniobras de operacion necesarias para contrarrestar los efectos provocados por fallas. Se trata principalmente de un sistema implantado en una central con las capacidades de re-configuracion de procesos y acomodo de fallas. Para esto, la linea de exposicion delimita primero el conocimiento existente sobre sistemas automaticos de control y supervision de operacion en una CGCC y resalta enseguida las grietas del sistema para darle paso al sistema de control activo tolerante a fallas que detectara fallas de los turbogeneradores de gas y vapor de una Central Generadora de Electricidad de Ciclo Combinado.

  8. Tetra-combined cogeneration system. Exergy and thermo economic evaluation; Sistema tetra combinado de cogeracao. Avaliacao exergetica e termoeconomica

    Energy Technology Data Exchange (ETDEWEB)

    Arriola, Domingo Wilson Garagatti [Sao Paulo Univ., SP (Brazil). Escola Politecnica. Dept. de Engenharia Mecanica]. E-mail: wgarriol@usp.br; Oliveira Junior, Silvio de [Instituto de Pesquisas Tecnologicas (IPT), Sao Paulo, SP (Brazil)]. E-mail: olivsilj@ipt.br

    2000-07-01

    This paper presents the description and the exergy and thermo economic evaluation of a new cogeneration system, called tetra-combined cogeneration system, that generates electricity and chilled water (for air conditioning purposes) and eventually steam. This system is composed of a gas turbine, a heat recovery steam generator, a condensation/extraction steam turbine and a hybrid absorption/steam ejection chiller. The exergy and thermo economic performance (exergy based costs of electricity, steam and chilled water production) of this system is compared with the performances of conventional cogeneration systems, pointing out the advantages and disadvantages of this new system. (author)

  9. Tetra-combined cogeneration system. Exergy and thermoeconomic evaluation; Sistema tetra combinado de cogeracao. Avaliacao exergetica e termoeconomica

    Energy Technology Data Exchange (ETDEWEB)

    Arriola, Domingo Wilson Garagatti [Sao Paulo Univ., SP (Brazil). Escola Politecnica. Dept. de Engenharia Mecanica]. E-mail: wgarriol@usp.br; Oliveira Junior, Silvio de [Instituto de Pesquisas Tecnologicas (IPT), Sao Paulo, SP (Brazil)]. E-mail: olivsilj@ipt.br

    2000-07-01

    The description and the exergy and thermo economic evaluation of a new cogeneration system, called tetra-combined cogeneration system, that generates electricity and chilled water (for air conditioning purposes) and eventually steam is presented. This system is composed of a gas turbine, a heat recovery steam generator, a condensation/extraction steam turbine and a hybrid absorption/steam ejection chiller.The exergy and thermo economic performance (exergy based costs of electricity, steam and chilled water production) of this system is compared with the performances of conventional cogeneration systems, pointing out the advantages and disadvantages of this new system. (author)

  10. Generational diversity.

    Science.gov (United States)

    Kramer, Linda W

    2010-01-01

    Generational diversity has proven challenges for nurse leaders, and generational values may influence ideas about work and career planning. This article discusses generational gaps, influencing factors and support, and the various generational groups present in today's workplace as well as the consequences of need addressing these issues. The article ends with a discussion of possible solutions.

  11. Control and reduction of NOx emissions on light hydrocarbons combustion in fluidized bed combustors: a technological prospection surveys; Controle e reducao de emissoes de NOx durante queima de hidrocarbonetos leves em combustores a leito fluidizado: um estudo de prospeccao tecnologica

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Douglas Alves; Winter, Eduardo [Instituto Nacional da Propriedade Industrial (INPI), Rio de Janeiro, RJ (Brazil)

    2008-07-01

    The present paper aims a technological prospecting study of the main technological agents involved in industrial light hydrocarbons combustion process. More specifically, the work approaches technologies applied to nitrogen oxides emissions control and reduction. Nitrogen oxides are typically known as 'NOx' (NO, N{sub 2}O, NO{sub 2}). 'NOx' are byproducts from fuel burning in combustion systems, including also in fluidized bed combustion systems. The technological prospecting study employed 'technology foresight' as tool for evaluating the technological perspectives of the thermal generation, basis on environment protection. Such technological perspectives of the thermal generation were evaluated through invention patent documents. The query methodology for obtaining of patent documents employed a free patent base, known as ESPACENET. Additionally, the documents obtained were evaluated, considering beyond the countries and the publication dates, technological perspectives employed to 'NOx' emissions control and reduction. It is very important to highlight around 70% of the industrial technological information are just found in invention patent documents. (author)

  12. Power generation from biomass estimation for projects of the clean development mechanism program; Estimacion de la generacion de energia a partir de biomasa para proyectos del programa de mecanismo de desarrollo limpio

    Energy Technology Data Exchange (ETDEWEB)

    Flores Velazquez, Roberto; Munoz Ledo Carranza, Ramon; Flores Brito, Brenda Berenice; Cano Ruiz, Karla Itzel [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2009-07-01

    In the present work, it is calculated the amount of energy and the reductions of greenhouse gases emissions that may be obtained taking advantage of organic wastes, such as, sugarcane bagasse and urban wastes. The appropriate use of these waster could generate up to 28% of the power requirements reported for the state of Morelos in 2005. Likewise, the Clean Development Mechanism could be employed to negotiate carbon certificates in such as way that the industrialized countries could meet with the goals implemented in the Kyoto Protocol and the state of Morelos could get the financial resource to be in the front technologic line with respect to the utilization of organic waster to generate power and to reduce greenhouse gases emissions. [Spanish] En el presente trabajo se estima la cantidad de energia y reduccion de emisiones de gases de efecto invernadero que podria obtenerse mediante el aprovechamiento de desechos industriales y municipales en el estado de Morelos, Mexico, tales como el bagazo de cana y la basura municipal. El uso adecuado de estos desechos podria generar hasta un 28% de los requerimientos energeticos de Morelos reportados en 2005. Asimismo, a traves del programa de Mecanismo de Desarrollo Limpio se podrian negociar certificados de carbono para que los paises industrializados cumplan las metas estipuladas en el Protocolo de Kyoto, y el estado de Morelos obtenga la inversion necesaria para estar a la vanguardia tecnologica en la utilizacion de desechos organicos para la generacion de energia y la reduccion de gases de efecto invernadero.

  13. Isotope generator

    International Nuclear Information System (INIS)

    1979-01-01

    The patent describes an isotope generator incorporating the possibility of stopping elution before the elution vessel is completely full. Sterile ventilation of the whole system can then occur, including of both generator reservoir and elution vessel. A sterile, and therefore pharmaceutically acceptable, elution fluid is thus obtained and the interior of the generator is not polluted with non-sterile air. (T.P.)

  14. Instant Generation

    Science.gov (United States)

    Loveland, Elaina

    2017-01-01

    Generation Z students (born between 1995-2010) have replaced millennials on college campuses. Generation Z students are entrepreneurial, desire practical skills with their education, and are concerned about the cost of college. This article presents what need to be known about this new generation of students.

  15. Optimising generators

    Energy Technology Data Exchange (ETDEWEB)

    Guerra, E.J.; Garcia, A.O.; Graffigna, F.M.; Verdu, C.A. (IMPSA (Argentina). Generators Div.)

    1994-11-01

    A new computer tool, the ARGEN program, has been developed for dimensioning large hydroelectric generators. This results in better designs, and reduces calculation time for engineers. ARGEN performs dimensional tailoring of salient pole synchronous machines in generators, synchronous condensers, and generator-motors. The operation and uses of ARGEN are explained and its advantages are listed in this article. (UK)

  16. Oil geopolitics and its implications to the production and technological strategies for the usage of brazilian oil resources; Geopolitica do petroleo e suas implicacoes sobre as estrategias produtivas e tecnologicas para o aproveitamento dos recursos petroliferos nacionais

    Energy Technology Data Exchange (ETDEWEB)

    Machado, Giovani [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE). Programa de Planejamento Energetico. Programa de Recursos Humanos da ANP, PRH-21

    2004-07-01

    This study evaluates the implications of different geopolitics scenarios over the productive and technological strategies for exploiting national oil resources. Initially, it discusses the international oil market fundamentals, focusing the dynamics of the light-heavy prices differential. Then, it analysis the effects three possible scenarios over such market fundamentals: Strong OPEC due to 'reinforcement of the price band mechanism discipline'; Weak OPEC due to 'market contestation' (productive empowerment of non-OPEC countries or quitting of OPEC member-countries interested in getting more productive autonomy - such as Algeria, Nigeria and, eventually, Iraq); and, Weak OPEC due to 'strategies to reduce geopolitics vulnerability' (minimization of supply disruption risks). Afterwards, it evaluates the impacts of those scenarios over the productive and technological strategies for exploiting national oil resources. Finally, it concludes that the scenarios of Strong OPEC and Weak OPEC due to 'strategies to reduce geopolitics vulnerability' are the most favorable for the exploitation of national oil resources, whilst the scenario Weak OPEC due to 'market contestation' would challenge the oil companies operating in the country to generate productive and technology strategies which strongly promotes E and P cost reduction in Brazil in order to maintain the competitiveness of the national oil. (author)

  17. Angra 3 - economic and financial evaluation of the enterprise; Angra 3 - avaliacao economico-financeira do empreendimento

    Energy Technology Data Exchange (ETDEWEB)

    Andrade, Ronaldo Barata de [ELETROBRAS Termonuclear S.A. (ELETRONUCLEAR), Rio de Janeiro, RJ (Brazil)]. E-mail: rbarata@eletronuclear.gov.br

    2006-07-01

    This paper presents an updated economic-financial evaluation of Angra 3 Nuclear Power Plant project and estimates the lowest power tariff value at which power potentially made available may be commercialized and yet ensures the project a profitability level agreeable to the interests of economic agents and shareholders. According to the project evaluation practice, Angra 3 power generation was considered separately from ELETRONUCLEAR operating plants (Angra 1 and Angra 2), thus preventing result distortions bound to occur if the economic-financial variables of the new project were analyzed associated with financial commitments and commercialization conditions resulting from the project implementation process and the generated power commercialization conditions, respectively. For this evaluation different technical and economic scenarios were devised, and the theory of Capital Asset Pricing Model (CAPM) for Own Capital cost and that of Weighted Average Cost of Capital (WACC) were used in addition to the forecast of the Statement of Results and Free Cash flow of Shareholders throughout the power plant life, which is the estimate basis for the lowest power tariff value and the Internal Return Rate (IRR) of the project. (author)

  18. Comparative exergoeconomic analysis of prime movers of cogeneration plants; Avaliacao exergoeconomica comparativa de acionadores primarios de plantas de cogeracao

    Energy Technology Data Exchange (ETDEWEB)

    Donatelli, Joao L.M. [Espirito Santo Univ., Vitoria, ES (Brazil). Dept. de Engenharia Mecanica]. E-mail: donatelli@lttc.com.ufrj.br; Vieira, Leonardo S.R. [Centro de Pesquisas de Energia Eletrica, Rio de Janeiro, RJ (Brazil). Area de Conhecimento de Materiais e Mecanica]. E-mail: lsrv@cepel.br; Cruz, Manuel E.C. [Universidade Federal, Rio de Janeiro, RJ (Brazil). Dept. de Engenharia Mecanica]. E-mail: manuel@serv.com.ufrj.br

    2000-07-01

    In this paper we apply exergoeconomic principles to perform a comparative analysis of the use of internal combustion engines or gas turbines as prime movers of cogeneration plants. A preliminary comparison of these movers can be obtained by analysing them individually, considering the complete utilization of the generated products rated on a common exergetic basis. However, when these movers are integrated in a cogeneration plant, it is necessary to perform a global system analysis, which will consider the coupling between generation capacity and demand, under the design conditions. The design of a cogeneration plant should, ideally, consider all the aspects that affect its performance. In this paper we take into account several aspects which are not normally collectively considered in similar analyses encountered in the literature. Specifically, the comparative procedure considers the electrical tariff on an hourly basis, the electrical and thermal load profiles, the influence of the environmental conditions on the performance of the prime movers, sizing and operation mode options to meet plant loads, part-load efficiency, different criteria for cost partitioning, and, finally, the effect of size on plant cost. Once the operating conditions of the cogeneration plant are defined, the procedure attributes costs to all the fluxes, allowing for the identification of the ranges of capacity where each mover is economically advantageous. We apply the procedure to the energetic supply analysis of a typical process of Brazilian shopping centers. (author)

  19. Rural electrification based on photovoltaic systems: systemic evaluation and analysis; Eletrificacao rural com sistemas fotovoltaicos: avaliacao e analise sistemicas

    Energy Technology Data Exchange (ETDEWEB)

    Orellana Lafuente, Renan Jorge

    1995-07-01

    In spite of all advances made by modern technology, there are still regions which remoteness has made electrification of poor rural localities very difficult or impossible. The only practical solution for these localities is a local, decentralized form of electrical generation, such as solar energy. Based on its availability and potential, together with the scientific and technical advances made in photovoltaic conversion, solar energy is an alternative which is viable for many rural areas in developing countries. The technology has matured sufficiently, but in its application there is still a need for systematization for experiences, especially in the areas of planning and management. The present work deals with a project carried in the community of Chimboata, Chimboata department, Bolivia. The implementation aspects are analysed and the implementation methodology described. Finally, the forms of managing and funding this type of systems are analysed. (author)

  20. Wind Generators

    Science.gov (United States)

    1989-01-01

    When Enerpro, Inc. president, Frank J. Bourbeau, attempted to file a patent on a system for synchronizing a wind generator to the electric utility grid, he discovered Marshall Space Flight Center's Frank Nola's power factor controller. Bourbeau advanced the technology and received a NASA license and a patent for his Auto Synchronous Controller (ASC). The ASC reduces generator "inrush current," which occurs when large generators are abruptly brought on line. It controls voltage so the generator is smoothly connected to the utility grid when it reaches its synchronous speed, protecting the components from inrush current damage. Generator efficiency is also increased in light winds by applying lower than rated voltage. Wind energy is utilized to drive turbines to generate electricity for utility companies.

  1. Evaluation of radioiodinetherapy protocol for patients with Plummer disease; Avaliacao do protocolo da radioiodoterapia para pacientes com doenca de Plummer

    Energy Technology Data Exchange (ETDEWEB)

    Mendonca, Keyla Mary Cavalheiro; Antonio Filho, Joao; Brandao, Simone Cristina Soares, E-mail: keylamcm@yahoo.com.br, E-mail: jaf@ufpe.br, E-mail: simonecordis@yahoo.com.br [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil); Santos, Marcus Aurelio P. dos, E-mail: masantos@cnen.gov.br [Centro Regional de Ciencias Nucleares do Nordeste (CRCN-NE/CNEN-PE), Recife, PE (Brazil)

    2014-07-01

    The disease Plummer (DP) is generated by the thyroid cells that function autonomously, independent the rest of the organ parenchyma. The DP presents a prevalence of 1% to 9%, higher in regions with iodine deficiency, affecting six women for every man. The study was conducted at the Department of Nuclear Medicine of Universidade Federal de Pernambuco (UFPE) from {sup 99m}Tc data capture and mass existing in the thyroid records of 54 patients with PD who underwent radioiodine therapy with fixed activities 1110 megabecquerels (MBq) from 2004 to 2008. For capitation of {sup 99m}Tc from a group of 22 patients were used 5 ml syringes, measured by a Capintec CRC-7 model activimeter, having scintigraphy after 20 minutes and results in a region of interest. Mass evaluation was based on method of palpation of the thyroid, considering the mass standard. It is observed that 68.2% of patients received more activity than needed, 31.8% were less active, and none received activity in accordance with your needs. There was a statistically significant difference (p <0.05) between the fixed activities and activities computed for all patients, according to Chi-square test for independence with 21 degrees of freedom. The cure rate of a group of 32 patients was 75% after one year of follow-up. It is suggested that the RIT is preceded by an assessment of the maximum percentage of uptake and thyroid mass.

  2. Evaluation of the dispersion of oil refinery liquid effluent; Avaliacao da dispersao de efluente liquido de refinaria de petroleo

    Energy Technology Data Exchange (ETDEWEB)

    Mariano, Adriano Pinto; Silva, Ariovaldo Jose da; Oliveira, Valdenilson Jose Alves de; Angelis, Dejanira de Franceschi de [Universidade Estadual Paulista (UNESP), Rio Claro, SP (Brazil). Dept. de Bioquimica e Microbiologia. Inst. de Biociencias], e-mail: adrianomariano@yahoo.com.br

    2010-07-15

    In this paper, two techniques to evaluate the dispersion of the effluent of an oil refinery are presented. Thus, the dispersion plume was characterized by field measurements of electrical conductivity and by computational simulation (Cormix simulator). An oil refinery whose effluent is discharged on the Atibaia river (Paulinia/SP) is taken as study case. The behavior of the effluent was evaluated until 1000 m after the discharge. The results show that the measurement of electrical conductivity is a suitable technique to evaluate the dispersion of oil refinery wastewaters, since they have high conductivity and for this reason there is a strong contrast between the values of the wastewater and the ambient background. Furthermore, other water quality parameters had a dispersion behavior similar to that shown by the conductivity. The dispersion plume generated by the computational simulator showed high concordance with the field data. In this manner, computational simulation can be a useful tool to evaluate the dispersion of discharges considering hypothetical scenarios, as well as to design the discharge channel. (author)

  3. Generative Semantics.

    Science.gov (United States)

    King, Margaret

    The first section of this paper deals with the attempts within the framework of transformational grammar to make semantics a systematic part of linguistic description, and outlines the characteristics of the generative semantics position. The second section takes a critical look at generative semantics in its later manifestations, and makes a case…

  4. Generative Semantics

    Science.gov (United States)

    Bagha, Karim Nazari

    2011-01-01

    Generative semantics is (or perhaps was) a research program within linguistics, initiated by the work of George Lakoff, John R. Ross, Paul Postal and later McCawley. The approach developed out of transformational generative grammar in the mid 1960s, but stood largely in opposition to work by Noam Chomsky and his students. The nature and genesis of…

  5. Sound generator

    NARCIS (Netherlands)

    Berkhoff, Arthur P.

    2008-01-01

    A sound generator, particularly a loudspeaker, configured to emit sound, comprising a rigid element (2) enclosing a plurality of air compartments (3), wherein the rigid element (2) has a back side (B) comprising apertures (4), and a front side (F) that is closed, wherein the generator is provided

  6. Sound generator

    NARCIS (Netherlands)

    Berkhoff, Arthur P.

    2010-01-01

    A sound generator, particularly a loudspeaker, configured to emit sound, comprising a rigid element (2) enclosing a plurality of air compartments (3), wherein the rigid element (2) has a back side (B) comprising apertures (4), and a front side (F) that is closed, wherein the generator is provided

  7. Pulse Generator

    Science.gov (United States)

    Greer, Lawrence (Inventor)

    2017-01-01

    An apparatus and a computer-implemented method for generating pulses synchronized to a rising edge of a tachometer signal from rotating machinery are disclosed. For example, in one embodiment, a pulse state machine may be configured to generate a plurality of pulses, and a period state machine may be configured to determine a period for each of the plurality of pulses.

  8. Sound generator

    NARCIS (Netherlands)

    Berkhoff, Arthur P.

    2007-01-01

    A sound generator, particularly a loudspeaker, configured to emit sound, comprising a rigid element (2) enclosing a plurality of air compartments (3), wherein the rigid element (2) has a back side (B) comprising apertures (4), and a front side (F) that is closed, wherein the generator is provided

  9. Steam generator

    International Nuclear Information System (INIS)

    Fenet, J.-C.

    1980-01-01

    Steam generator particularly intended for use in the coolant system of a pressurized water reactor for vaporizing a secondary liquid, generally water, by the primary cooling liquid of the reactor and comprising special arrangements for drying the steam before it leaves the generator [fr

  10. Gas geochemistry: a new technology to evaluate petroleum systems; Geoquimica de gases: uma nova tecnologia em avaliacao de sistemas petroliferos

    Energy Technology Data Exchange (ETDEWEB)

    Santos Neto, Eugenio Vaz dos [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas. Gerencia de Geoquimica]. E-mail: eugenioneto@petrobras.com.br

    2004-11-01

    In the last decade hydrocarbon gas geochemistry has significantly evolved especially regarding to the widespread use of GC-C-IRMS (Gas chromatography-combustion-ion ratio monitoring system) techniques that allowed accurate measurements of {delta}{sup 13} C in the C{sub 1}-C{sub 4} fraction. Also, due to the improvement of the sampling procedures, sample collection - relatively small amounts of gas samples at low pressure - has become easier, sample transportation has become safer - the risk of accidents has been reduced - and analysis has become faster. The 'state-of-the-art' of the use of gas geochemistry to study processes within petroleum systems is discussed in this paper. The discussion is mainly focused on the identification of the hydrocarbon gas origin (biogenesis versus thermo genesis, mixing) and hydrocarbon gas generation (primary versus secondary cracking), including the inference of the relative thermal evolution and possible secondary alterations caused by biodegradation, secondary migration and eventually leakage from petroleum accumulations. Brief comments were also made about the new technologies involving noble gases and their potential use as tracers of processes in petroleum systems. Additionally, the origin of non-hydrocarbon gases in petroleum accumulations is succinctly discussed, as well as their possible economic impacts. The use of gas geochemistry techniques has brought a significant improvement in the understanding of petroleum systems under exploration in Brazil and in other parts of the world. Besides, on-going research projects suggest that there is a great potential for technological advances, e.g., adding the hydrogen isotopic composition of hydrocarbons to the interpretations, and also integrating the available results to the isotopic variations of noble gases. (author)

  11. Energy generation

    CSIR Research Space (South Africa)

    Osburn, L

    2009-02-01

    Full Text Available Current perceptions conjure images of photovoltaic panels and wind turbines when green building or sustainable development is discussed. How energy is used and how it is generated are core components of both green building and sustainable...

  12. Radionuclide generators

    International Nuclear Information System (INIS)

    Lambrecht, R.M.; Wollongong Univ.; Tomiyoshi, K.; Sekine, T.

    1997-01-01

    The present status and future directions of research and development on radionuclide generator technology are reported. The recent interest to develop double-neutron capture reactions for production of in vivo generators; neutron rich nuclides for radio-immunotherapeutic pharmaceuticals: and advances with ultra-short lived generators is highlighted. Emphasis is focused on: production of the parent radionuclide; the selection and the evaluation of support materials and eluents with respect to the resultant radiochemical yield of the daughter, and the breakthrough of the radionuclide parent: and, the uses of radionuclide generators in radiopharmaceutical chemistry, biomedical and industrial applications. The 62 Zn → 62 Cu, 66 Ni → 66 Cu, 103m Rh → 103 Rh, 188 W → 188 Re and the 225 Ac → 221 Fr → 213 Bi generators are predicted to be emphasized for future development. Coverage of the 99 Mo → 99m Tc generator was excluded, as it the subject of another review. The literature search ended June, 1996. (orig.)

  13. Nationalism and technological learning; Nacionalismo e aprendizagem tecnologica

    Energy Technology Data Exchange (ETDEWEB)

    Furtado, Andre Tosi; Freitas, Adriana Gomes [Universidade Estadual de Campinas, SP (Brazil). Inst. de Geociencias. Dept. de Politica Cientifica e Tecnologica]. E-mail: furtado@ige.unicamp.br; adriana@ige.unicamp.br

    2002-07-01

    This work evaluates the economic impacts resulting from the different forms of learning resulting from the execution of national technological projects. As an example, the work mentions the technological capability in deep water production systems promote by the PETROBRAS, in the period of the years 1986-2000. Based on a prior study, seven projects have been selected by a common characteristic of non successful commercial results. The main argument shows that nevertheless the commercial throwback, these projects were in the origin of important learning processes in the company, resulting in significant indirect economic impacts. Each of the project and the economic impact are described. The data of the research referring to the project samples are presented, revealing that the economic impacts are greater than seven times the project costs.

  14. PROSPECÇÃO TECNOLOGICA: SESQUITERPENO E ATIVIDADE ANTICONVULSIVANTE

    Directory of Open Access Journals (Sweden)

    RUSBENE BRUNO FONSECA CARVALHO

    2013-06-01

    Full Text Available O presente estudo teve como objetivo realizar uma prospecção tecnológica da atividade anticonvulsivante de sesquiterpenos com busca de patentes em bases de dados nacionais e internacionais. Nessa perspectiva a pesquisa foi realizada através de buscas nas bases de patentes INPI, WIPO, EPO e USPTO. Foram utilizadas como palavras chaves os termos sesquiterpeno ou anticonvulsivante, sesquiterpeno e anticonvulsivante e, sesquiterpene and anticonvulsant sendo validos os que apresentassem os termos descritos nos campos de pesquisa: titulo e resumo. Nos resultados analisados foi verificado um número pequeno de patentes relacionadas as palavras-chave. A classificação internacional mais abundante nesse estudo foi A61K. Os Estados Unidos é o maior detentor de patentes relacionadas a sesquiterpeno e atividade anticonvulsivante.

  15. Efficienza tecnologica e produttiva delle strutture trasfusionali in Italia

    Directory of Open Access Journals (Sweden)

    Dante Cornago

    2002-03-01

    Full Text Available In all the developed countries the methods of blood collection and production are relevant subjects for the pharmacoeconomics studies, because of their health and economic implications related to the health policies in this area. The “blood market” rappresents an area where the sanitary items, the economic items and also the ethic items must be broached at the same time; therefore it can be considered emblematic. By this situation arises Progetto CO.R.SA. (COsti Raccolta SAngue, a project for estimating productivity and cost for a representive sample of italian trasfusional structure (ST. The study is supported by Società Italiana di Medicina Trasfusionale e Immunoematologia (SIMTI. In Italy there are about 380 ST, but only 30 ST resulted suitable for the study. The analysis investigates six rates concerning: a wastes; b technological efficiency; c personnel productivity. The present work describes only the informations on ST organization and production, delaying the results about costs to a specific further report.

  16. NEOFLAVONOIDS WITH IMPLICATIONS IN NEGLECTED DISEASES: AN TECNOLOGICA FORECASTING

    Directory of Open Access Journals (Sweden)

    George Laylson Da Silva Oliveira

    2014-09-01

    Full Text Available The present work aimed to make a technological forecasting about the neoflavonoids and its implications in treatment of neglected diseases (NDs. Thus, this research was carried out through a comprehensive and systematic bibliographic search in articles and patents. The articles were searched in the database of the Periodical of CAPES, Science Direct, Scopus, Pub Med, Web of Science and ACS Publications. The patent research was performed in bases of the INPI, EPO, WIPO, USPTO and SIPO. According to the results obtained, it was possible to observe that the neoflavonoids may be a new source of medications for the treatment of NDs, since were found studies that attributed activity for the treatment of malaria, trypanosomiasis and leishmaniasis. Large part of published documents was in the form of scientific articles and a small part in the form of deposit of record of patent applications. In this way, this work can serve as an incentive of technological innovation for the development of new research involving neoflavonoids, seen that the record number of deposits of patent applications is still relatively insufficient to meet the current demand for technological and scientific innovation with relation to NDs.

  17. EL FACTOR HUMANO: RESISTENCIA A LA INNOVACIÓN TECNOLOGICA

    Directory of Open Access Journals (Sweden)

    MARELYS NÚÑEZ DE SARMIENTO

    2005-07-01

    Full Text Available El propósito del presente artículo es establecer el impacto que tienen las innovaciones tecnológicas en las personas que forman parte de las organizaciones. Las reacciones involucradas en la adopción de una determinada tecnología, los cambios de paradigmas que involucran y la necesidad de la participación general de los miembros de la misma. Así como también la importancia de las tecnologías de información para la creación de ventajas competitivas en un mercado cada día más globalizado. Obteniéndose como reflexión final que los cambios tecnológicos deben ser adoptados en conjunto con el personal y en concordancia con los intereses de la empresa.

  18. Innovazione tecnologica e sinergie tra soluzioni geospaziali Lo "scenario Intergraph"

    Directory of Open Access Journals (Sweden)

    Andrea Fiduccia

    2012-04-01

    Full Text Available Negli ultimi anni abbiamo potuto assistere all’espansione delle tecnologie per l’Informazione Geografica dall’originale ambito della cartografia numerica per la conoscenza del territorio (automated mapping o per la gestione delle infrastrutture e delle reti tecnologiche (facility management verso un dominio più ampio denominato "geospatial".Technological innovation and synergies between geospatial solutions. The "Intergraph's scenario".Geospatial  is  much  more  than  GIS.  We  can  understand  the evolution  of  Geographic  Information  considering  some  new working groups and OWS demonstrations of Open Geospa-tial Consortium: Sensor Web Enablement, Sensor Fusion Ena-blement, Feature & Decision Fusion, Aviation, Emergency and Disaster Management, etc. Another point of observation is to analyze some brand new products of a multinational enterprise committed to the innovation like Intergraph Corporation. Part of Hexagon AB, Intergraph, Leica Geosystems and ERDAS are working together to leverage joint strengths in geospatial in-novation.Intergraph’s Motion Video Exploitation solution leverages full motion video, giving analysts the ability to collect, analyze, and maximize the value of video assets.GeoMedia  3D  is  a  GeoMedia  add-on  product  that  extends the functionality of Intergraph’s geospatial solutions through an integrated 3D visualization and analysis environment. You can visualize, navigate, analyze, and interact with 3D data na-tively in GeoMedia.GeoMedia Smart Client delivers an enterprise geospatial plat-form engineered to support large numbers of users who are unable to operate full desktop products, but whose workflows need  advanced  geospatial  functionality  that  cannot  be  sup-ported by Web mapping tools.G/Technology Fiber Optic Works 1.0 streamlines the management  of  fiber  optic  infrastructure  for  utilities,  municipalities, agencies and communications companies who are implement-ing a public or private fiber network. Fiber Optic Works is a complete, enterprise-scalable design and asset management system that allows users to efficiently manage the circuit com-plexity of a geospatially dispersed fiber optic communications network infrastructure, all in one integrated system.

  19. Innovazione tecnologica e sinergie tra soluzioni geospaziali Lo "scenario Intergraph"

    Directory of Open Access Journals (Sweden)

    Andrea Fiduccia

    2012-04-01

    Full Text Available Negli ultimi anni abbiamo potuto assistere all’espansione delle tecnologie per l’Informazione Geografica dall’originale ambito della cartografia numerica per la conoscenza del territorio (automated mapping o per la gestione delle infrastrutture e delle reti tecnologiche (facility management verso un dominio più ampio denominato "geospatial". Technological innovation and synergies between geospatial solutions. The "Intergraph's scenario".Geospatial  is  much  more  than  GIS.  We  can  understand  the evolution  of  Geographic  Information  considering  some  new working groups and OWS demonstrations of Open Geospa-tial Consortium: Sensor Web Enablement, Sensor Fusion Ena-blement, Feature & Decision Fusion, Aviation, Emergency and Disaster Management, etc. Another point of observation is to analyze some brand new products of a multinational enterprise committed to the innovation like Intergraph Corporation. Part of Hexagon AB, Intergraph, Leica Geosystems and ERDAS are working together to leverage joint strengths in geospatial in-novation.Intergraph’s Motion Video Exploitation solution leverages full motion video, giving analysts the ability to collect, analyze, and maximize the value of video assets.GeoMedia  3D  is  a  GeoMedia  add-on  product  that  extends the functionality of Intergraph’s geospatial solutions through an integrated 3D visualization and analysis environment. You can visualize, navigate, analyze, and interact with 3D data na-tively in GeoMedia.GeoMedia Smart Client delivers an enterprise geospatial plat-form engineered to support large numbers of users who are unable to operate full desktop products, but whose workflows need  advanced  geospatial  functionality  that  cannot  be  sup-ported by Web mapping tools.G/Technology Fiber Optic Works 1.0 streamlines the management  of  fiber  optic  infrastructure  for  utilities,  municipalities, agencies and communications companies who are implement-ing a public or private fiber network. Fiber Optic Works is a complete, enterprise-scalable design and asset management system that allows users to efficiently manage the circuit com-plexity of a geospatially dispersed fiber optic communications network infrastructure, all in one integrated system.

  20. Radionuclide generators

    International Nuclear Information System (INIS)

    Lambrecht, R.M.

    1983-01-01

    The status of radionuclide generators for chemical research and applications related to the life sciences and biomedical research are reviewed. Emphasis is placed upon convenient, efficient and rapid separation of short-lived daughter radionuclides in a chemical form suitable for use without further chemical manipulation. The focus is on the production of the parent, the radiochemistry associated with processing the parent and daughter, the selection and the characteristic separation methods, and yields. Quality control considerations are briefly noted. The scope of this review includes selected references to applications of radionuclide generators in radiopharmaceutical chemistry, and the life sciences, particularly in diagnostic and therapeutic medicine. The 99 Mo-sup(99m)Tc generator was excluded. 202 references are cited. (orig.)

  1. Generation Next

    Science.gov (United States)

    Hawkins, B. Denise

    2010-01-01

    There is a shortage of accounting professors with Ph.D.s who can prepare the next generation. To help reverse the faculty deficit, the American Institute of Certified Public Accountants (CPAs) has created the new Accounting Doctoral Scholars program by pooling more than $17 million and soliciting commitments from more than 70 of the nation's…

  2. Generative Contexts

    Science.gov (United States)

    Lyles, Dan Allen

    Educational research has identified how science, technology, engineering, and mathematics (STEM) practice and education have underperforming metrics in racial and gender diversity, despite decades of intervention. These disparities are part of the construction of a culture of science that is alienating to these populations. Recent studies in a social science framework described as "Generative Justice" have suggested that the context of social and scientific practice might be modified to bring about more just and equitable relations among the disenfranchised by circulating the value they and their non-human allies create back to them in unalienated forms. What is not known are the underlying principles of social and material space that makes a system more or less generative. I employ an autoethnographic method at four sites: a high school science class; a farm committed to "Black and Brown liberation"; a summer program geared towards youth environmental mapping; and a summer workshop for Harlem middle school students. My findings suggest that by identifying instances where material affinity, participatory voice, and creative solidarity are mutually reinforcing, it is possible to create educational contexts that generate unalienated value, and circulate it back to the producers themselves. This cycle of generation may help explain how to create systems of justice that strengthen and grow themselves through successive iterations. The problem of lack of diversity in STEM may be addressed not merely by recruiting the best and the brightest from underrepresented populations, but by changing the context of STEM education to provide tools for its own systematic restructuring.

  3. Steam generators

    International Nuclear Information System (INIS)

    Hayden, R.L.J.

    1979-01-01

    Steam generators for nuclear reactors are designed so that deposition of solids on the surface of the inlet side of the tubesheet or the inlet header with the consequent danger of corrosion and eventual tube failure is obviated or substantially reduced. (U.K.)

  4. Analysis of the processes of R and D in generating innovation of new technology-based firms in science and technology parks; Analisis de los procesos de I+D en la generacion de innovacion de las nuevas empresas de base tecnologica en parques cientificos y tecnologicos

    Energy Technology Data Exchange (ETDEWEB)

    Bueno Campos, E.; Acosta Prado, J. C.; Longo Somoza, M.

    2010-07-01

    This paper identifies the R and D processes and technological capabilities of the New Technology-Based Firms (NTBFs) created at Madrid Science Park and Leganes Technologic Science Park located in Madrid (Spain). The empirical study is carried out through an inductive deductive methodology. The results have allowed us to describe the processes and capabilities and also the relationships between them. A relevant set of managerial implications are finally derived from the research. (Author) 64 refs.

  5. Thermoelectric generator

    International Nuclear Information System (INIS)

    Purdy, D.L.

    1978-01-01

    The main components of a thermoelectric generator are housed in an evacuated cylindrical vessel. In the middle of it there is the radioactive heat source, e.g. 90 Sr or 238 Pu, enclosed by a gamma radiation shield. This one is surrounded by a heat-insulating screen from getter material or indicidual sheets of titanium. In the bottom of the screen there are arranged several thermocouples on a circle. The thermocouples themselves are contained within casings sealed gas-tight and filled with an inert gas, e.g. argon. By separating the internal space of the generator vessel from the thermocouple casings, made of e.g. n- respectively p-doped lead telluride cylinders, for both the optimal gas state may be obtained. (DG) [de

  6. Cluster generator

    Science.gov (United States)

    Donchev, Todor I [Urbana, IL; Petrov, Ivan G [Champaign, IL

    2011-05-31

    Described herein is an apparatus and a method for producing atom clusters based on a gas discharge within a hollow cathode. The hollow cathode includes one or more walls. The one or more walls define a sputtering chamber within the hollow cathode and include a material to be sputtered. A hollow anode is positioned at an end of the sputtering chamber, and atom clusters are formed when a gas discharge is generated between the hollow anode and the hollow cathode.

  7. Photon generator

    Science.gov (United States)

    Srinivasan-Rao, Triveni

    2002-01-01

    A photon generator includes an electron gun for emitting an electron beam, a laser for emitting a laser beam, and an interaction ring wherein the laser beam repetitively collides with the electron beam for emitting a high energy photon beam therefrom in the exemplary form of x-rays. The interaction ring is a closed loop, sized and configured for circulating the electron beam with a period substantially equal to the period of the laser beam pulses for effecting repetitive collisions.

  8. Event generators

    International Nuclear Information System (INIS)

    Durand, D.; Gulminelli, F.; Lopez, O.; Vient, E.

    1998-01-01

    The results concerning the heavy ion collision simulations at Fermi energies by means of phenomenological models obtained in the last two years ar presented. The event generators are essentially following the phase of elaboration of analysis methods of data obtained by INDRA or NAUTILUS 4 π multidetectors. To identify and correctly quantify a phenomenon or a physical quantity it is necessary to verify by simulation the feasibility and validity of the analysis and also to estimate the bias introduced by the experimental filter. Many studies have shown this, for instance: the determination of the collision reaction plan for flow studies, determination of kinematical characteristics of the quasi-projectiles, and the excitation energy measurement stored in the hot nuclei. To Eugene, the currently utilised generator, several improvements were added: introduction of space-time correlations between the different products emitted in the decay of excited nuclei by calculating the trajectories of the particles in the final phase of the reaction; taking into account in the decay cascade of the discrete levels of the lighter fragments; the possibility of the schematically description of the explosion of the nucleus by simultaneous emission of multi-fragments. Thus, by comparing the calculations with the data relative to heavy systems studied with the NAUTILUS assembly it was possible to extract the time scales in the nuclear fragmentation. The utilisation of these event generators was extended to the analysis of INDRA data concerning the determination of the vaporization threshold in the collisions Ar + Ni and also the research of the expansion effects in the collisions Xe + Sn at 50 MeV/u

  9. GENERATIVE LEADERSHIP

    Directory of Open Access Journals (Sweden)

    Janina León

    2010-07-01

    Full Text Available This article presents the results of a research project that studied leadership from the standpoint of the personal conceptions that influence the behavior of local government leaders, as well as those conceptions desired to generate the social transformation processes required in communities. Qualitative methodology was used. Categories of analysis were created based on Pearson’s (1992 model of psychological archetypes. A relevant finding was the limited advance shown by interviewees regarding self-knowledge and a fragmented vision between the observer and the observee, which hinders their ability to take on the challenges that current reality demands from them.

  10. Power generation

    International Nuclear Information System (INIS)

    Nunez, Anibal D.

    2001-01-01

    In the second half of twentieth century, nuclear power became an industrial reality. Now the operating 433 power plants, the 37 plants under construction, near 9000 years/reactor with only one serious accident with emission of radioactive material to the environment (Chernobyl) show the maturity of this technology. Today nuclear power contribute a 17% to the global generation and an increase of 75 % of the demand of electricity is estimated for 2020 while this demand is expected to triplicate by 2050. How this requirement can be satisfied? All the indicators seems to demonstrate that nuclear power will be the solution because of the shortage of other sources, the increase of the prices of the non renewable fuels and the scarce contribution of the renewable ones. In addition, the climatic changes produced by the greenhouse effect make even more attractive nuclear power. The situation of Argentina is analyzed and compared with other countries. The convenience of an increase of nuclear power contribution to the total national generation seems clear and the conclusion of the construction of the Atucha II nuclear power plant is recommended

  11. Plasma generator

    International Nuclear Information System (INIS)

    Omichi, Takeo; Yamanaka, Toshiyuki.

    1976-01-01

    Object: To recycle a coolant in a sealed hollow portion formed interiorly of a plasma limiter itself to thereby to cause direct contact between the coolant and the plasma limiter and increase of contact area therebetween to cool the plasma limiter. Structure: The heat resulting from plasma generated during operation and applied to the body of the plasma limiter is transmitted to the coolant, which recycles through an inlet and outlet pipe, an inlet and outlet nozzle and a hollow portion to hold the plasma limiter at a level less than a predetermined temperature. On the other hand, the heater wire is, at the time of emergency operation, energized to heat the plasma limiter, but this heat is transmitted to the limiter body to increase the temperature thereof. However, the coolant recycling the hollow portion comes into direct contact with the limiter body, and since the plasma limiter surround the hollow portion, the heat amount transmitted from the limiter body to the coolant increases to sufficiently cool the plasma limiter. (Yoshihara, H.)

  12. Electrical generator

    International Nuclear Information System (INIS)

    Purdy, D.L.

    1976-01-01

    A nuclear heart pacer having a heat-to-electricity converter including a solid-state thermoelectric unit embedded in rubber which is compressed to impress hydrostatic precompression on the unit is described. The converter and the radioactive heat source are enclosed in a container which includes the electrical circuit components for producing and controlling the pulses; the converter and components being embedded in rubber. The portions of the rubber in the converter and in the container through which heat flows between the radioactive primary source and the hot junction and between the cold junction and the wall of the container are of thermally conducting silicone rubber. The 238 Pu primary radioactive source material is encapsuled in a refractory casing of WC-222 (T-222) which in turn is encapsuled in a corrosion-resistant casing of platinum rhodium, a diffusion barrier separating the WC-222 and the Pt--Rh casings. The Pt--Rh casing is in a closed basket of tantalum. The tantalum protects the Pt--Rh from reacting with other materials during cremation of the host, if any. The casings and basket suppress the transmission of hard x rays generated by the alpha particles from the 238 Pu. The outside casing of the pacer is typically of titanium but its surface is covered by an electrically insulating coating, typically epoxy resin, except over a relatively limited area for effective electrical grounding to the body of the host. It is contemplated that the pacer will be inserted in the host with the exposed titanium engaging a non-muscular region of the body

  13. Magnet Free Generators - 3rd Generation Wind Turbine Generators

    DEFF Research Database (Denmark)

    Jensen, Bogi Bech; Mijatovic, Nenad; Henriksen, Matthew Lee

    2013-01-01

    This paper presents an introduction to superconducting wind turbine generators, which are often referred to as 3rd generation wind turbine generators. Advantages and challenges of superconducting generators are presented with particular focus on possible weight and efficiency improvements. A comp...

  14. Dosimetric evaluation in mammary glands radiotherapy using expansive prosthesis with magnetic valve; Avaliacao dosimetrica de tratamentos de radioterapia de mama usando proteses expansivas com valvula magnetica

    Energy Technology Data Exchange (ETDEWEB)

    Lizar, J.C.; Pavoni, J.F.; Baffa, O. [Universidade de Sao Paulo (USP), Ribeirao Preto (Brazil); Krutman, Y. [Rabin Medical Center (RMC), (Israel)

    2016-07-01

    This work aims to verify the influence on dose distribution that the expansive prosthesis (SILIMED/470), containing a magnetic valve, generates in radiotherapy postoperative treatment of patients who have undergone mastectomy. (author)

  15. Trip generation characteristics of special generators

    Science.gov (United States)

    2010-03-01

    Special generators are introduced in the sequential four-step modeling procedure to represent certain types of facilities whose trip generation characteristics are not fully captured by the standard trip generation module. They are also used in the t...

  16. Evaluation of the price volatility of short-term in Brazil and its relation with the thermal generation; Avaliacao da volatilidade do preco de curto prazo no Brasil e sua relacao com a geracao termica

    Energy Technology Data Exchange (ETDEWEB)

    Heideier, R.B.; Prado, F.A.A.; Saidel, M.A.; Ueocka, M.Z. [Universidade de Sao Paulo (EPUSP), SP (Brazil). Escola Politecnica. Dept. de Energia e Automacao Eletricas], E-mails: fernando@sinerconsult.com.br, saidel@pea.usp.br, marcos.ueocka@poli.usp.br

    2009-07-01

    This article evaluate the intensity of volatility of the electric power prices in the short term market in selected countries. It were analyzed historical series of monthly prices of major energy markets worldwide, with assessment of the energy matrix of each region. The study, by analysis of data entry program for optimizing the operation of the SIN (NEWAVE and DECOM), concludes that the price volatility in short-term in Brazil is marked by the large variation of thermal power available, especially the lack of natural gas.

  17. Evaluation of the maximum energy achieved through generation of hydro and wind power in the Northeast subsystem; Avaliacao da maxima energia assegurada atraves de geracao hidro-eolica no subsistema do Nordeste

    Energy Technology Data Exchange (ETDEWEB)

    Campos, Pedro T.; Teixeira, Marcos A.; Kissel, Johannes [Gesellschaft Fuer Technische Zusammenarbeit (GTZ) (Germany)

    2010-07-01

    In the current context to encourage sustainable development, wind energy plays an important role in the spread of renewable energy sources. In this paper, the possibilities and difficulties of wind power integration in large-scale are evaluated, specifically in the northeastern region of Brazil. From the seasonal complementarity with the water source, scenarios are set out where the maximum participation of only these two sources in the energy supply of the region is sought. Aiming to evaluate the possibilities of a completely sustainable regional energy supply, the northeast subsystem is isolated, excluding, in principle, imports and exports. Therefore, the energy storage capacity of reservoirs in the region is used as a key factor, combined with the seasonal availability of data sources and the annual energy consumption of the region. (author)

  18. Energetic evaluation of low potential biomass gasifier coupled with a burner of the produced gas for generation of heat; Avaliacao energetica de um gaseificador de biomassa de baixa potencia, associado a um combustor do gas produzido, para geracao de calor

    Energy Technology Data Exchange (ETDEWEB)

    Martin, Samuel [Universidade de Brasilia (FAV/UNB), DF (Brazil). Fac. de Agronomia e Medicina Veterinaria], email: samuelmartin@unb.nr; Silva, Jadir Nogueira [Universidade Federal de Vicosa (UFV), MG (Brazil). Dept. de Engenharia Agricola; Machado, Cassio Silva; Zanatta, Fabio Luis; Galvarro, Svetlana F.S. [Universidade Federal de Vicosa (UFV), MG (Brazil)

    2011-07-01

    In the search of alternatives for sustainable socio-economic development, this study had the objective of evaluating the energetic performance of a concurrent flow biomass gasifier associated with a burner for the gas produced which was of low potential for air heating using a renewable energy source (substituting non-renewable). In this system 4 tests were performed using eucalyptus chips (tests 1 and 2) and logs (tests 3 and 4) as fuel, for the two fan motor frequencies of 60 and 50 hertz. Temperature in the combustion chamber was monitored, along with fuel consumption and other variables. In the tests, the average exhaust air temperature was maintained between 92.7 and 100.4 deg C, and the reduction in the motor frequency from 60 to 50 Hz caused an increase in the duration of the tests. The system presented the best energetic performance when utilizing a frequency of 60 Hz for both fuel types. However, the results of energy efficiency varied very little when comparing tests performed at the same fan frequency. Thus, the gasification process was little affected by variation in the physical characteristics of the tested fuels, and it was recommended that the equipment operate with a frequency of 60 Hz. (author)

  19. Self generation, small generation, and embedded generation issues

    International Nuclear Information System (INIS)

    2001-01-01

    The New Brunswick Market Design Committee for electric power restructuring has been directed to examine issues regarding cogeneration and small-scale, on-site generation and how they will fit within the framework of the bilateral contract market. The Committee will also have to deal with issues of generation embedded in a distribution system. The Committee has defined cogeneration as the simultaneous production of electricity and useful thermal energy. Self-generation has been defined as small-scale power generation by an end-user, while embedded generation has been defined as a generation facility that is located within a distribution utility but is not directly connected to the transmission system. The Committee has postponed its decision on whether embedded generation will be eligible to participate under the bilateral contract market for electricity. This report discusses general issues such as the physical support of generation, market support of generation, transition issues and policy issues. It also discusses generation support issues such as operating reserves, transmission tariff issues, and distribution tariffs. Market support issues such as transmission access for generation sales were also considered, along with market access for generation sales, and net metering for behind the meter generation. 7 refs., 1 tab

  20. Leading Generation Y

    National Research Council Canada - National Science Library

    Newman, Jill M

    2008-01-01

    .... Whether referred to as the Millennial Generation, Generation Y or the Next Generation, the Army needs to consider the gap between Boomers, Generation X and the Soldiers that fill our junior ranks...

  1. Assessment pozzolanicity waste red ceramics produced in Valley Assu / RN; Avaliacao da atividade pozolanica dos residuos de ceramica vermelha produzidos no Vale do Assu / RN

    Energy Technology Data Exchange (ETDEWEB)

    Palhares, Rodolfo de Azevedo; Pereira, Arthur Ruan da Silva; Cabral, Kleber Cavalcanti; Nobrega, Andreza Kelly Costa, E-mail: rodolfo.palhares@hotmail.com, E-mail: arthurruan_rn@hotmail.com, E-mail: kleber.cabral@ufersa.edu.br, E-mail: akcn123@hotmail.com [Universidade Federal Rural do Semi-Arido (UFERSA), Mossoro, RN (Brazil). Departamento de Ciencias Exatas

    2016-07-01

    It is known that both the cement industry as a ceramist contribute much to the generation of environmental impacts. Be the Co2 in the atmosphere, as well as the generation of excessive waste, reaching 20%. The objective of this study is to analyze the potential pozollanic of waste from the red ceramic industries Valley Assu / RN, in order that this material can be incorporated as alternative raw material in the manufacture of ecological and similar brick, replacing partially in its composition Portland cement. Thus contributing to reducing the environmental impact produced by both the ceramics industry, such as cement. To evaluate the efficiency of pozollanic material, it was made sample preparation and then the physico-chemical characterization. After performing tests, it was noticed that the material has the minimum requirements established in standard to be considered as pozollanic material. (author)

  2. Characterization and evaluation of residue 'grits' of the cellulose industry; Caracterizacao e avaliacao do resisduo 'grits' da industria de celulose

    Energy Technology Data Exchange (ETDEWEB)

    Destefani, A.Z.; Santos, M.M.; Holanda, J.N.F. [Universidade Estadual do Norte Fluminense Darcy Ribeiro (LAMAV/CCT/UENF), Campos dos Goytacazes, RJ (Brazil). Lab. de Materiais Avancados

    2010-07-01

    The cellulose industry generates huge amounts of solid waste residue called 'grits'. These wastes have been willing over time in landfills near the mills. However, this type of disposal is not environmentally friendly and can cause degradation and environmental pollution. In addition, environmental legislation increasingly severe and the high costs of landfill have led the search for new alternatives for final disposition of this abundant waste. In this context, this study is to characterize waste grits, generated by the cellulose industry in the region of Aracruz-ES. The residue samples were characterized in terms of chemical composition, X-ray diffraction, particle size distribution and thermal analysis (DTA and TGA). The characterization of the residual 'grits' demonstrated its potential as a feedstock for production of soil-cement bricks. (author)

  3. Performance evaluation of an automatic positioning system for photovoltaic panels; Avaliacao de desempenho de um sistema de posicionamento automatico para paineis fotovoltaicos

    Energy Technology Data Exchange (ETDEWEB)

    Alves, Alceu Ferreira; Cagnon, Jose Angelo [Universidade Estadual Paulista (FEB/UNESP), Bauru, SP (Brazil). Fac. de Engenharia], Emails: alceu@feb.unesp.br, jacagnon@feb.unesp.br

    2009-07-01

    The need of using electric energy in localities not attended by the utilities has motivated the development of this research, whose main approach was photovoltaic systems and the search for better performance of these systems with the solar panels positioning toward the sun. This work presents the performance evaluation of an automatic positioning system for photovoltaic panels taking in account the increase in generation of electric energy and its costs of implantation. It was designed a simplified electromechanical device, which is able to support and to move a photovoltaic panel along the day and along the year, keeping its surface aimed to the sun rays, without using sensors and with optimization of movements, due the adjustment of panel's inclination take place only once a day. The obtained results indicated that the proposal is viable, showing a compatible cost compared to the increase in the generation of electricity. (author)

  4. Economic and financial evaluation of the wind power project in Northeast region, Brazil; Avaliacao economico-financeira de projeto de central eolica na regiao nordeste

    Energy Technology Data Exchange (ETDEWEB)

    Rocha, Paulo Glicio da; Lima, Maria Angela de Queiroz; Melo Junior, Adalberto de Bastos [Companhia Hidro Eletrica do Sao Francisco (DFPL/CHESF), Recife, PE (Brazil). Div. de Planejamento Economico-Financeiro], Emails: paulogr@chesf.gov.br, angelq@chesf.gov.br, adalbert@chesf.gov.br; Bezerra, Pedro; Bittencourt, Rogerio [Companhia Hidro Eletrica do Sao Francisco (DEFA/CHESF), Recife, PE (Brazil). Div. de Projetos de Fontes Alternativas], E-mails: pbezerra@chesf.gov.br, rogeriob@chesf.gov.br

    2000-07-01

    This work deals with the analysis of economic and financial feasibility of using wind power in the Northeast region for electric power production, considering the new electricity sector model. The case study presented here refers to the design of a 50 MW Wind Farm in the region, based on preliminary data from wind collected in the period from 1993 to 1995. Some programs were used to evaluate this project: ALWIN, which estimates the potential for wind energy production; NEWAVE for determination operating marginal costs and generation plants values and ANAFIN, for economic and financial evaluation of the project, using scenarios, through the deterministic and probabilistic analysis.

  5. Distributed generation induction and permanent magnet generators

    CERN Document Server

    Lai, L

    2007-01-01

    Distributed power generation is a technology that could help to enable efficient, renewable energy production both in the developed and developing world. It includes all use of small electric power generators, whether located on the utility system, at the site of a utility customer, or at an isolated site not connected to the power grid. Induction generators (IGs) are the cheapest and most commonly used technology, compatible with renewable energy resources. Permanent magnet (PM) generators have traditionally been avoided due to high fabrication costs; however, compared with IGs they are more reliable and productive. Distributed Generation thoroughly examines the principles, possibilities and limitations of creating energy with both IGs and PM generators. It takes an electrical engineering approach in the analysis and testing of these generators, and includes diagrams and extensive case study examples o better demonstrate how the integration of energy sources can be accomplished. The book also provides the ...

  6. Assessment of activity of nitrate-reducing bacterial souring control; Avaliacao da atividade de bacterias redutoras de nitrato no controle de acidificacao de reservatorios de petroleo

    Energy Technology Data Exchange (ETDEWEB)

    Sousa, Kally A. de; Cammarota, Magali C.; Servulo, Eliana F.C. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Escola de Quimica

    2008-07-01

    The effect of nitrate addition in relation to NRB concentration was evaluated on biogenic H{sub 2}S generation in anaerobic microcosms with produced water. A 2{sup k} factorial experimental design was performed by using as response variables nitrate (NO{sub 3}{sup -}) and sulfate (SO{sub 4}{sup =}) consumption and nitrite (NO{sub 2}{sup -}) and sulfide (H{sub 2}S) production and as independent variables the SRB and NRB (10{sup 1} - 10{sup 7} MPN/mL) and NO{sub 3}{sup -} (127.5 - 727.5 mg/L) initial concentrations. Each condition was carried out under incubation at 30 deg C during 7, 14 and 28 days. The lowest sulfide production (0.4 - 0.8 mg/L) was achieved for 10{sup 4} MPN/mL of SRB and NRB and 427.5 mg/L nitrate. Also, a reduction of sulfide generation was obtained by nitrate addition when low SRB and NRB concentrations were established. In such condition, the produced sulfide is rather dependent of nitrate concentration. The increase of the NRB concentration has not resulted in the reduction of sulfide production, even when higher nitrate concentrations were used. (author)

  7. Geographic information systems as a tool for environmental evaluation of hydropower potential; Sistemas de informacoes geograficas como ferramenta para avaliacao ambiental de potenciais hidreletricos

    Energy Technology Data Exchange (ETDEWEB)

    Dzedzej, Maira; Correa, Fabio; Malta, Joao [IX Consultoria e Representacoes Ltda, Itajuba, MG (Brazil); Flauzino, Barbara Karoline [IX Consultoria e Representacoes Ltda, Itajuba, MG (Brazil); Universidade Federal de Itajuba (UNIFEI), MG (Brazil); Santos, Afonso Henriques Moreira [MS Consultoria Ltda, Itajuba, MG (Brazil); Universidade Federal de Itajuba (UNIFEI), MG (Brazil)

    2010-07-01

    The hydropower plants are responsible for much of the energy generated in the country, there is also a large hydro potential in Brazilian rivers. This form of power generation is considered renewable and fits into the concept of sustainable development, however, social and environmental impacts from the implementation of hydropower projects are known and widely discussed, especially when it comes to large plants. In this context, study the environmental analysis of potential hydropower was incorporated at various stages of the studies implementation, in order to, identify environmental factors and that will restrict or impede construction, to obtain the best option for the environment, evaluate the role and of social and environmental impacts, contribute to improving the design and functionality of the enterprises in order to reduce overall costs, minimize conflicts and assist in preserving the environment. To fulfill these functions to a satisfactory and reliable level, it the study has increasingly used the techniques, tools and applications of Geographic Information Systems in the process of environmental assessment, since they provide procurement, integration, visualization and data analysis of natural resources, its uses and protection, offering greater security and speed in decision making. This paper presents some applications of GIS in environmental assessment processes, developed mainly in the steps of estimating hydropower potential, hydropower inventory, basic design and environmental licensing. (author)

  8. Comparative evaluation of hybrid systems of natural gas cogeneration and sugar cane bagasse; Avaliacao comparativa de sistemas hibridos de cogeracao a gas natutral e bagaco de cana

    Energy Technology Data Exchange (ETDEWEB)

    Zamboni, Leonardo Moneci; Tribess, Arlindo [Sao Paulo Univ., SP (Brazil). Escola Politecnica. Dept. de Engenharia Mecanica]. E-mail: leonardo.zamboni@poli.usp.br; atribess@usp.br

    2006-07-01

    The consumption of electricity in Brazil and mainly in the State of Sao Paulo is increasing gradually. On the other hand, the hydraulic potential is practically exhausted and the government has no resources for such new investments. One solution is the construction of thermo electrical plants with the use of the natural gas and sugar cane bagasse. The natural gas has the advantage of being available in great amount and less pollutant. And the sugar cane bagasse, besides being a by-product of low value, does not cause a global pollution. The work consists of the determination of the best option considering criterion of minimum cost for kWh of energy produced. For such, thermo economic analysis with electricity and steam production costs evaluation in exergetic basis, was accomplished. In the evaluations the consumption of natural gas and the costs of the sugar cane bagasse were varied. The results show that the cogeneration plant with combined cycle using natural gas and burning sugar cane bagasse in the recovery boiler presents the smallest cost of electricity and steam generation (even not being the cycle with larger exergetic efficiency). On the other hand, for a natural gas cost of 140 US$/t and a cost of sugar cane bagasse superior to 10,50 US$/t the cogeneration plant with combined cycle using only natural gas (and, therefore not burning or gasifying sugar cane bagasse) presented the smallest cost of electricity and steam generation. (author)

  9. Random pulse generator

    International Nuclear Information System (INIS)

    Guo Ya'nan; Jin Dapeng; Zhao Dixin; Liu Zhen'an; Qiao Qiao; Chinese Academy of Sciences, Beijing

    2007-01-01

    Due to the randomness of radioactive decay and nuclear reaction, the signals from detectors are random in time. But normal pulse generator generates periodical pulses. To measure the performances of nuclear electronic devices under random inputs, a random generator is necessary. Types of random pulse generator are reviewed, 2 digital random pulse generators are introduced. (authors)

  10. Evaluation of radon measuring technique using passive detector activated carbon; Avaliacao da tecnica de medicao do radonio utilizando detector passivo com carvao ativado

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, Paulo Roberto Rocha; Lessa, Edmilson de Lima; Oliveira, Evaldo Paulo de, E-mail: epoliveira@aluno.ird.gov.br [Instituto de Radioprotecao e Dosimetria, (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil). Div. de Radioprotecao Ambiental e Ocupacional

    2014-07-01

    This study aims to evaluate the efficiency of measuring the radioactive gas Radon ({sup 222} Rn) with passive detector activated carbon. Alpha Guard, exposure chamber, air sampler, default font Radio, calibrator flow, flow adjuster, ducts drivers: For this, various equipment to make the measurement system as were used. An assembly of such equipment, with specific sequence was used allowing for more efficient exposure of passive detectors Radon gas. Twenty samples were heated to remove moisture and then stored in desiccator until the experiment were made. The exhibition was held passive dosimeters being removed from the chamber, and one hour after, subjected to analysis by gamma spectrometry in germanium (HPGe) for an hour. Subsequently, other measurements were made at scheduled times and sequential for one hour. The results were presented in report form and spectra, measures and graphs generated by Alpha Guard were also extracted. Finally we calculated the efficiency of the passive meter activated carbon. (author)

  11. Probabilistic distributions of wind velocity for the evaluation of the wind power potential; Distribuicoes probabilisticas de velocidades do vento para avaliacao do potencial energetico eolico

    Energy Technology Data Exchange (ETDEWEB)

    Vendramini, Elisa Zanuncio

    1986-10-01

    The theoretical model of wind speed distributions allow valuable information about the probability of events relative to the variable in study eliminating the necessity of a new experiment. The most used distributions has been the Weibull and the Rayleigh. These distributions are examined in the present investigation, as well as the exponential, gamma, chi square and lognormal distributions. Three years of hourly averages wind data recorded from a anemometer setting at the city of Ataliba Leonel, Sao Paulo State, Brazil, were used. Using wind speed distribution the theoretical relative frequency was calculated from the distributions which have been examined. Results from the Kolmogorov - Smirnov test allow to conclude that the lognormal distribution fit better the wind speed data, followed by the gamma and Rayleigh distributions. Using the lognormal probability density function the yearly energy output from a wind generator installed in the side was calculated. 30 refs, 4 figs, 14 tabs

  12. Evaluation of ethanol aged PVDF: diffusion, crystallinity and dynamic mechanical thermal properties; Avaliacao do PVDF envelhecido em etanol combustivel: difusao, cristalinidade e propriedades termicas dinamico-mecanicas

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Agmar J.J.; Costa, Marysilvia F., E-mail: agmar@metalmat.ufrj.br [Coordenacao dos Programas de Pos-Graduacao em Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil)

    2015-07-01

    This work discuss firstly the effect of the ethanol fuel absorption by PVDF at 60°C through mass variation tests. A Fickian character was observed for the ethanol absorption kinetics of the aged PVDF at 60°C. In the second step, the dynamic mechanical thermal properties (E’, E’, E” and tan δ) of the PVDF were evaluated through dynamic mechanical thermal analysis (DMTA). The chemical structure of the materials was analyzed by X-ray diffraction analysis (XRD), and significant changes in the degree of crystallinity were verified after the aging. However, DMTA results showed a reduction in the storage modulus (E') of the aged PVDF, which was associated to diffusion of ethanol and swelling of the PVDF, which generated a prevailing plasticizing effect and led to reduction of its structural stiffness. (author)

  13. Quality assessment of radiopharmaceuticals in nuclear medicine services at Northeast states, Brazil; Avaliacao da qualidade de radiofarmacos em servicos de medicina nuclear de estados da regiao nordeste

    Energy Technology Data Exchange (ETDEWEB)

    Andrade, Wellington Gomes de

    2012-07-01

    The radiopharmaceuticals are used in the field nuclear medicine services (NMS) as tracer in the diagnoses and treatment of many diseases. Radiopharmaceuticals used in nuclear medicine and usually have a minimum of pharmacological effect. The procedures for labelling Radiopharmaceuticals should be observed in order to minimize risks to patients, employees and individuals from the public, and to be administered in humans, must be sterile and free of pyrogens and possess elements all measures of quality controls required a conventional drug. The 'Agencia Nacional de Vigilancia Sanitaria (ANVISA)' in its 'Resolucao de Diretoria Colegiada' (RDC) No. 38 of June 4{sup th} 2008, decided that the NMS must perform quality control in the generators eluate and radiopharmaceuticals according to recommendations of manufacturers and scientific evidence accepted by ANVISA. Thus, this study proposes to evaluate the quality of the generator {sup 99M}o-{sup 99m}Tc eluate and radiopharmaceuticals labeled with {sup 99m}Tc used in most NMS of some states in the Northeast, in relation to radionuclide, chemical, radiochemical purity and pH and promote the inclusion of procedure for quality control of radiopharmaceuticals in routine NMS. The results show that 90% radionuclidic purity, 98.2% purity chemical and radiochemical purity of 46% and 100% of the eluates are in agreement with international pharmacopoeias; already radiopharmaceuticals showed 82.6% purity and all radiochemical pH values are also in accordance with international pharmacopoeias. Even with so many positive results, staff the majority of MNS was not able to perform the quality control of the eluates and radiopharmaceuticals. Showing the importance of implementing of quality control programs of the eluates and radiopharmaceuticals in nuclear medicine. (author)

  14. Quality assessment of radiopharmaceuticals in nuclear medicine services at Northeast states, Brazil; Avaliacao da qualidade de radiofarmacos em servicos de medicina nuclear de estados da regiao nordeste

    Energy Technology Data Exchange (ETDEWEB)

    Andrade, Wellington Gomes de

    2012-07-01

    The radiopharmaceuticals are used in the field nuclear medicine services (NMS) as tracer in the diagnoses and treatment of many diseases. Radiopharmaceuticals used in nuclear medicine and usually have a minimum of pharmacological effect. The procedures for labelling Radiopharmaceuticals should be observed in order to minimize risks to patients, employees and individuals from the public, and to be administered in humans, must be sterile and free of pyrogens and possess elements all measures of quality controls required a conventional drug. The 'Agencia Nacional de Vigilancia Sanitaria (ANVISA)' in its 'Resolucao de Diretoria Colegiada' (RDC) No. 38 of June 4{sup th} 2008, decided that the NMS must perform quality control in the generators eluate and radiopharmaceuticals according to recommendations of manufacturers and scientific evidence accepted by ANVISA. Thus, this study proposes to evaluate the quality of the generator {sup 99M}o-{sup 99m}Tc eluate and radiopharmaceuticals labeled with {sup 99m}Tc used in most NMS of some states in the Northeast, in relation to radionuclide, chemical, radiochemical purity and pH and promote the inclusion of procedure for quality control of radiopharmaceuticals in routine NMS. The results show that 90% radionuclidic purity, 98.2% purity chemical and radiochemical purity of 46% and 100% of the eluates are in agreement with international pharmacopoeias; already radiopharmaceuticals showed 82.6% purity and all radiochemical pH values are also in accordance with international pharmacopoeias. Even with so many positive results, staff the majority of MNS was not able to perform the quality control of the eluates and radiopharmaceuticals. Showing the importance of implementing of quality control programs of the eluates and radiopharmaceuticals in nuclear medicine. (author)

  15. Power Generation for River and Tidal Generators

    Energy Technology Data Exchange (ETDEWEB)

    Muljadi, Eduard [National Renewable Energy Lab. (NREL), Golden, CO (United States); Wright, Alan [National Renewable Energy Lab. (NREL), Golden, CO (United States); Gevorgian, Vahan [National Renewable Energy Lab. (NREL), Golden, CO (United States); Donegan, James [Ocean Renewable Power Company (ORPC), Portland, ME (United States); Marnagh, Cian [Ocean Renewable Power Company (ORPC), Portland, ME (United States); McEntee, Jarlath [Ocean Renewable Power Company (ORPC), Portland, ME (United States)

    2016-06-01

    Renewable energy sources are the second largest contributor to global electricity production, after fossil fuels. The integration of renewable energy continued to grow in 2014 against a backdrop of increasing global energy consumption and a dramatic decline in oil prices during the second half of the year. As renewable generation has become less expensive during recent decades, and it becomes more accepted by the global population, the focus on renewable generation has expanded from primarily wind and solar to include new types with promising future applications, such as hydropower generation, including river and tidal generation. Today, hydropower is considered one of the most important renewable energy sources. In river and tidal generation, the input resource flow is slower but also steadier than it is in wind or solar generation, yet the level of water turbulent flow may vary from one place to another. This report focuses on hydrokinetic power conversion.

  16. The Main Technological Characteristics of Apparatus for Industrial Radiochemical Processes, in Particular Ethylene Polymerization; Caracteristique techniques fondamentals des appareils pour l'application industrielle de reactions chimiques sous rayonnement (notamment la polymerisation de l'ethylene ); Osnovnye tekhnologicheskie kharakteristiki apparatov dlya provedeniya radiatsionno-khimi-cheskikh protsessov (v chastnosti, dlya polimerizatsii ehtilena) v promyshlennom masshtabe; Principales caracteristicas tecnologicas de los aparatos para la aplicacion industrial de reacciones radioquimicas

    Energy Technology Data Exchange (ETDEWEB)

    Syrkus, N P; Breger, A K; Weinstein, B I [Karpov Physicochemical Institute, Moscow, USSR (Russian Federation)

    1960-07-15

    , Q {approx} W{sub 0}{sup 0'5}. (author) [Spanish] Se propone un metodo de evaluacion de la efectividad de los aparatos, cualquiera que sea su construccion, comparandola con la productividad de un aparato infinitamente grande que tenga la misma fuente de radiaciones. Se indican las caracteristicas tecnologicas de un aparato destinado a la polimerizacion del etileno mediante radiaciones (a presion de 200 atmosferas y temperatura de 25{sup o} C{sup 4} empleando como fuente principal radiaciones gamma de cobalto-60 a distintas actividades. Se pueden calcular los datos tecnicos de tal aparato segun el valor medio de la intensidad de las dosis, fijado segun la magnitud del coeficiente de rendimiento energetico del aparato. Se indica en el trabajo que, siendo las demas condiciones iguales, la productividad (Q) del aparato es funcion exponencial de la intensidad (W{sub 0}) de las radiaciones gamma del mismo. Para el aparato que se estudia en el trabajo la formula es: Q{approx}W{sub 0}{sup 0'5}. (author) [Russian] V doklade rassmotreny v obshchem vide otdel'nye naibolee vazhnye tekhnologicheskie kharakteristiki apparatov (na primere sfericheskogo apparata) dlya provedeniya radiatsionno-khimicheskikh protsessov v promyshlennom masshtabe. Predlozhen metod otsenki ehffektivnosti apparata lyuboj konstruktsii putem sravneniya s proizvoditel'nost' yu beskonechno bol'shogo apparata, imeyushchego tot zhe istochnik izlucheniya. Priveden raschet tekhnologicheskoj kharakteristiki apparata dlya radiatsionnoj polimerizatsii ehtilena (davlenie 200 atm, temperatura 25{sup o} C{sup 3} so sterzhnevym istochnikom gamma-izlucheni ya Co{sup 60} razlichnoj aktivnosti. Takoj apparat mozhno rasschityvat' po srednim znacheniyam moshchnostej doz, opredelyaemym po velichine ehnergeticheskogo KPD apparata. Pokazano, chto proizvoditel'nost'apparata (Q), pri prochikh ravnykh usloviyakh, yavlyaetsya stepennoj funktsiej moshchnosti (W{sub 0}) gamma-izlucheniya apparata. Dlya rassmotrennogo apparata : Q

  17. Evaluation of the potential of waste fondant glass in formulations of ceramic pasta; Avaliacao do potencial fundente do residuo de vidro em formulacoes de massas ceramicas

    Energy Technology Data Exchange (ETDEWEB)

    Soares Filho, J.E.; Santos, L.L. dos; Nascimento, R.M. do, E-mail: elsinhofilho@gmail.com [Universidade Federal do Rio Grande do Norte (PPGCEM/UFRN), RN (Brazil). Programa de Pos-Graduacao em Ciencia e Engenharia de Materiais; Feitosa, A.O.; Dutra, R.P.S. [Universidade Federal da Paraiba (PPCEM/UFPB), PB (Brazil). Programa de Pos-Graduacao em Ciencia e Engenharia de Materiais

    2014-07-01

    An increasing amount of waste generated and deposited on the environment, many unspecified decomposition with time, as is the case of the glass. Thinking about it, the purpose of this study is to evaluate the power of the flux residue on glass formulations porcelains, as a flux to feldspar replacement. This study was performed in comparison with a standard formulation. The raw materials were characterized in the diffraction X-ray fluorescence and X-ray thermal differential analysis, and determination of the technological properties of water absorption, linear contraction, ignition loss, apparent porosity and apparent specific gravity in the formulation standard and replacement of feldspar in different percentages of waste and processing conditions. Specimens of the formulations were subjected to assay of three points. Results indicate that the residue glass has the potential of being used as a flux material in the composition of the ceramic body reduces the apparent porosity and according to the technology of water absorption property. The ceramic mass standard was classified as semi-stoneware, the BIIa group, and after the addition of the residue in any of the three percentages evaluated was classified as sandstone, belonging to the group BIb.(author)

  18. Appreciation of environmental risks analysis methodologies in the offshore well drilling activities; Analise de metodologias na avaliacao de riscos ambientais relacionados as atividades de perfuracao de pocos maritimos

    Energy Technology Data Exchange (ETDEWEB)

    Zampolli, Daniella M. [Universidade Estadual de Campinas (UNICAMP), Campinas, SP (Brazil); Morooka, Celso K. [Universidade Estadual de Campinas (UNICAMP), Campinas, SP (Brazil). Faculdade de Engenharia Mecanica. Dept. de Engenharia de Petroleo

    2004-07-01

    Nowadays, the projects of products and processes are supposed to integrate environmental risks criteria, in addition to their inherent operation impacts. Industrial activities, in general, generate risks to the environment, and, in case of incidents occurrence, many of the possible consequences can be translated into serious impacts. The Risk Analysis is destined to act as a decision tool in the environmental area, and therefore, the use of one of these during the project phase of an enterprise becomes important, aiming the guarantee of the system reliability. The present article has the purpose of analyzing methodologies that are being employed for the environmental risk analysis, as well as usual procedures applied in the oil industry, specially for the offshore wells drilling, evaluating and discussing their peculiarities and possible improvement. It was intended to obtain a general overview of risk analysis methodologies, with the objective of verifying the existence of some characteristics that would positively contribute for the knowledge of the inherent risks in the activities of petroleum installations, where this kind of learning is something extremely technically necessary and legally mandatory. (author)

  19. Economic evaluation of organic deposition inhibition treatment: case study; Avaliacao economica de tratamentos de inibicao de deposicao organica: estudo de casos

    Energy Technology Data Exchange (ETDEWEB)

    Lechuga, Fernanda Curty; Seidl, Peter Rudolf; Guimaraes, Maria Jose de Oliveira [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Escola de Quimica; Lucas, Elizabete Fernandes [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Inst. de Macromoleculas

    2008-07-01

    During the production process the temperature and pressure decrease along the well, that generate an increase in viscosity, changes in the composition of the oil and chemical changes in the balance of oil. These changes in the balance may lead to precipitation and deposition of organic components of heavy oil. These occurrences cause serious economic consequences. To solve problems related to organic deposition, it is proposed some actions to prevent the formation of these deposits. Chemical additives interfere in precipitation of paraffins and aggregation of asphaltenes, increasing stability. This paper aims to examine, in economic terms, treatments prevention in different wells by the mechanism of inhibition of organic deposition by the action of chemical additives. The methodology applied for the economic analysis was the return on investment (ROI - Return-on-investments) that could estimate when there was an economic gain in problems of organic deposition treated with chemical additives. The results showed that if these wells use prevention methods it could get a return of more than $ 100.00 per dollar invested in treatment, which would be beneficial, since these treatments increase the production of oil and reduce the idle time in wells. (author)

  20. A model for economic evaluation of the use of Adsorbed Natural Gas (ANG); Modelo de avaliacao economica do uso do Gas Natural Adsorvido (GNA)

    Energy Technology Data Exchange (ETDEWEB)

    Azevedo, Diana C.S.; Cavalcante Junior, Celio L.; Torres, A. Eurico B.; Oliveira Junior, Jose A.; Medeiros, Vanildo M. de [Universidade Federal do Ceara (UFC), Fortaleza, CE (Brazil); Campos, Flavio B.; Moura, Newton R. de [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES). Gerencia de Gas e Energia; Campos, Michel F. [PETROBRAS, Rio de Janeiro, RJ (Brazil). Gerencia de Tecnologia de Gas e Energia; Alexandre, Francisco de Assis Souza

    2004-07-01

    Natural gas is currently transported by two main ways: through pipelines and stored in reservoirs, under compressed (CNG) or liquefied (LNG) forms. Adsorbed natural gas (ANG) is a third alternative to vessel storage, which has been intensively reported in the scientific and technical literature. Working pressures are considerably lower for ANG (3,5 MPa as compared to 25 MPa for CNG), which results in lower costs with vessel construction and compression and safer handling. The project ADSPOR, sponsored by PETROBRAS and part of the R and D portfolio of RedeGasEnergia, aims to assess the technical and economical feasibility of storing and transporting natural gas confined in carbon adsorbents. The objectives of this project are the production of high-capacity active carbons, the collection of adsorption data for NG storage and the economic evaluation of ANG. The present work presents a model for cost estimation of the ANG business, which comprises from the compression into ANG vessels until the distribution to the final costumer, taking into account several shipping modes. The variables involved in the model were: compression costs, equipment and materials technical data, costs with product handling and shipping costs for motor ways, railways and inland waterways. These variables were linked so as to generate a cost matrix that may be used to assess investment and calculate the final cost for GNA transport. The model may be used to carry out parameter sensitivity analysis, for decision-making and management purposes. (author)

  1. Magnetohydrodynamic (MHD) power generation

    International Nuclear Information System (INIS)

    Chandra, Avinash

    1980-01-01

    The concept of MHD power generation, principles of operation of the MHD generator, its design, types, MHD generator cycles, technological problems to be overcome, the current state of the art in USA and USSR are described. Progress of India's experimental 5 Mw water-gas fired open cycle MHD power generator project is reported in brief. (M.G.B.)

  2. Talkin' 'bout My Generation

    Science.gov (United States)

    Rickes, Persis C.

    2010-01-01

    The monikers are many: (1) "Generation Y"; (2) "Echo Boomers"; (3) "GenMe"; (4) the "Net Generation"; (5) "RenGen"; and (6) "Generation Next". One name that appears to be gaining currency is "Millennials," perhaps as a way to better differentiate the current generation from its…

  3. Work Values across Generations

    Science.gov (United States)

    Hansen, Jo-Ida C.; Leuty, Melanie E.

    2012-01-01

    Mainstream publication discussions of differences in generational cohorts in the workplace suggest that individuals of more recent generations, such as Generation X and Y, have different work values than do individuals of the Silent and Baby Boom generations. Although extant research suggests that age may influence work values, few of the…

  4. Minding the Generation Gap

    Science.gov (United States)

    Field, John

    2011-01-01

    Generational conflict is back. After years of relative silence, and mutual ignorance, the young and old are once more at war. With youth unemployment high on the political agenda, the fortunes of the "jobless generation" are being contrasted with those of the "golden generation" of baby boomers, but is one generation really…

  5. Prospective of the solar thermal technologies through concentration for the generation of electrical energy (Annexe 4 in 'A vision of year 2030 on the use of the renewable energies in Mexico'); Prospectiva de las tecnologias termosolares a concentracion para la generacion de potencia electrica (Anexo 4 en 'Una vision al 2030 de la utilizacion de las energias renovables en Mexico')

    Energy Technology Data Exchange (ETDEWEB)

    Ramos Berumen, Carlos [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2005-08-15

    In this document are presented the technical-economical the present state of the technologies with electricity generation purposes at worldwide level and the technological prospective for the next years. At present it is estimated that in most of the power scenarios at worldwide level the situation will continue with a strong dependency in fossil fuels. The future dynamics of the energy procurement will depend on diverse factors such as energy efficiency, the international norms and regulations derived of the environmental impact and prices of the primary energy sources. The countries of the first world are developing new technologies of compatible character with the environment, with self-consumption intentions and with the vision of establishing new markets of export towards developing countries. In this context, several countries have established R y D programs for the generation of electricity through solar systems using the thermodynamic conversion. [Spanish] En este documento se presenta el estado actual tecnico-economico de las tecnologias con propositos de generacion de electricidad a nivel mundial y la prospectiva tecnologica para los proximos anos. En la actualidad se estima que en la mayoria de los escenarios energeticos a nivel mundial la situacion continuara con una fuerte dependencia de los combustibles fosiles. La dinamica futura del suministro de energia dependera de diversos factores como la eficiencia energetica, las normas y regulaciones derivadas del impacto ambiental y los precios internacionales de los energeticos. Los paises del primer mundo estan desarrollando nuevas tecnologias de caracter compatible con el medio ambiente, con propositos de autoconsumo y con la vision de establecer nuevos mercados de exportacion hacia paises en desarrollo. En este contexto, varios paises han establecido programas de Investigacion y Desarrollo para la generacion de electricidad a traves de sistemas solares utilizando la conversion termodinamica.

  6. The distributed generation in Mexico: Which are the new perspectives associated to the institutional reforms of the electrical sector?; La generacion distribuida en Mexico: Cuales son las nuevas perspectivas asociadas a las reformas institucionales del sector electrico?

    Energy Technology Data Exchange (ETDEWEB)

    Islas Samperio, Jorge [Centro de Investigacion en Energia, Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico); Menanteau, Philippe [Departamento de Economia y Politica de la Energia, Universidad Pierre Mendes France (France)

    2004-06-15

    Historically, the electrical systems were constituted from local networks of small scale that were added together progressively to benefit from the effects of a more abundant demand and of the economies of scale in generation, that authorize the large interconnected systems. This logic at the moment seems to show certain limits, the factors that influence these technologies can vary greatly from one country to another, but nevertheless it is found in different degrees certain constants such as the search for a greater reliability in the electrical supply, the putting into work prevention policies of climatic change or the reforms of the electrical sector. In this work the influence of these factors was examined insisting particularly on the consequences of the opening of the electrical sector, departing from an analysis of the international experience in a first time and later examining the case of Mexico in the context of the present energy situation and the debate of the energy reform. The distributed generation: a new vector of technological opportunities in the electrical sector, the barriers for the diffusion of the distributed generation: the lessons of the international experience, the institutional problematic of the distributed generation within the effective legal framework of Mexico. [Spanish] Historicamente, los sistemas electricos se constituyeron a partir de redes locales de pequena escala que se fueron agregando progresivamente para beneficiarse de los efectos de una demanda mas abundante y de las economias de escala en generacion que autorizan los grandes sistemas interconectados. Esta logica parece actualmente mostrar ciertos limites, los factores que influyen sobre estas tecnologias pueden variar grandemente de un pais al otro, pero se encuentra, sin embargo, a grados diferentes ciertas constantes tales como la busqueda de una confiabilidad mas grande en el aprovisionamiento electrico, la puesta en obra de politicas de prevencion de cambio

  7. A phantom for assessing the personal dose equivalent, H{sub P}(10); Um fantoma para a avaliacao do equivalente de dose pessoal, H{sub P}(10).

    Energy Technology Data Exchange (ETDEWEB)

    Santoro, C.; Filho, J.A [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil). Departamento de Energia Nuclear; Santos, M.A.P.; Filho, L.C.G., E-mail: chsantoro@gmail.com, E-mail: masantos@cnen.gov.br, E-mail: l.filho@cnen.gov.br, E-mail: jaf@ufpe.br [Centro Regional de Ciencias Nucleares do Nordeste (CRCN-NE/CNEN-PE), Recife, PE (Brazil)

    2013-10-15

    Characteristics of a phantom designed to evaluate the personal dose equivalent, H{sub P}(10), and appropriate for photographic dosimetry are presented. It is called HP(10) phantom due to cavities constructed to insert dosimetric films at a depth of 10 mm. The H{sub P}(10) phantom is irradiated with ionizing radiation energy, E, from 45 to 1250 keV, with doses ranging from 0.2 to 50 mSv. It is positioned in the direction α = 0 °, and the radiation field focusing perpendicular to its front surface. So, are established calibration curves of dosimeters in the position conventionally true and quantities H{sub P}(10). It made a comparison between the responses obtained with the H{sub P}(10) phantom and responses obtained when using the calibration procedure recommended by ISO dosimeters. The ISO recommends getting the air kerma, Ka, for photons at test point of the radiation field by an ionization chamber. And through conversion coefficients, h{sub pK} (10; E, α), becomes the air kerma for H{sub P}(10). The ISO 4037-3 recommendation has been studied by researchers to ensure that the low energy spectral differences occur in radiation fields which are generated by various X-ray equipment, and induce changes in the percentages of conversion coefficients on the order of 10% to 90% . On the basis of the recommendations ISO, this article develops phantom able to assess the dose to the influence of scattering and absorption of radiation, its implications with respect to dosimetry, providing improvement in the assessment of doses. (author)

  8. Pipeline integrity evaluation: 10 years experience at Campos basin; Avaliacao de integridade de dutos submarinos de transferencia: 10 anos de atividades na Bacia de Campos

    Energy Technology Data Exchange (ETDEWEB)

    Bueno, Sergio Ibaje Oliveira; Franzoi, Aldo Renato [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil)

    2005-07-01

    PETROBRAS E and P department (up-stream segment) had assigned first contract for pipeline inspection using smart pigs in 1995. Up to this time only TRANSPETRO (down-stream segment) had an experience with those inspections mainly focused on first generation tools. On this contract, it was first time required high resolution tools, which had bigger defect detection capability and sizing accuracy as advantages but with higher cost. It was regarded necessary due to high costs involved on a virtual sub sea survey or repair. The investment was regarded fair as there is no way to establish correlation digs as well as normally done after on shore pipelines surveys. Actually the first internal inspection was carried out in 1997. From this period it has been realized the enormous importance on verifying all platforms installations and all procedures involving cleaning runs. We have taken many lessons from these inspections. Commissioning using all kinds of cleaning pigs (some was invented) that could be specially contracted on scaling removing jobs; diesel batch to make easy US pigs inspection, cleaning steps that should be gradual to allow receiving of debris without disturbing platforms process efficiency; special tools designed in-house to meet some specific installations requirements as limited pigability; were some issues that demanded efforts on this period. PETROBRAS/E and P through its Campos Basin Production Unit has been strongly involved on looking for solutions to keep its sub sea pipeline net integrity; a strategic asset that will guarantee the Brazilian development on oil and gas production. (author)

  9. Gamma ray generator

    Science.gov (United States)

    Firestone, Richard B; Reijonen, Jani

    2014-05-27

    An embodiment of a gamma ray generator includes a neutron generator and a moderator. The moderator is coupled to the neutron generator. The moderator includes a neutron capture material. In operation, the neutron generator produces neutrons and the neutron capture material captures at least some of the neutrons to produces gamma rays. An application of the gamma ray generator is as a source of gamma rays for calibration of gamma ray detectors.

  10. HTGR steam generator development

    International Nuclear Information System (INIS)

    Schuetzenduebel, W.G.; Hunt, P.S.; Weber, M.

    1976-01-01

    More than 40 gas-cooled reactor plants have produced in excess of 400 reactor years of operating experience which have proved a reasonably high rate of gas-cooled reactor steam generator availability. The steam generators used in these reactors include single U-tube and straight-tube steam generators as well as meander type and helically wound or involute tube steam generators. It appears that modern reactors are being equipped with helically wound steam generators of the once-through type as the end product of steam generator evolution in gas-cooled reactor plants. This paper provides a general overview of gas-cooled reactor steam generator evolution and operating experience and shows how design criteria and constraints, research and development, and experience data are factored into the design/development of modern helically wound tube steam generators for the present generation of gas-cooled reactors

  11. Cylindrical neutron generator

    Science.gov (United States)

    Leung, Ka-Ngo [Hercules, CA

    2008-04-22

    A cylindrical neutron generator is formed with a coaxial RF-driven plasma ion source and target. A deuterium (or deuterium and tritium) plasma is produced by RF excitation in a cylindrical plasma ion generator using an RF antenna. A cylindrical neutron generating target is coaxial with the ion generator, separated by plasma and extraction electrodes which contain many slots. The plasma generator emanates ions radially over 360.degree. and the cylindrical target is thus irradiated by ions over its entire circumference. The plasma generator and target may be as long as desired. The plasma generator may be in the center and the neutron target on the outside, or the plasma generator may be on the outside and the target on the inside. In a nested configuration, several concentric targets and plasma generating regions are nested to increase the neutron flux.

  12. Second harmonic generation and sum frequency generation

    International Nuclear Information System (INIS)

    Pellin, M.J.; Biwer, B.M.; Schauer, M.W.; Frye, J.M.; Gruen, D.M.

    1990-01-01

    Second harmonic generation and sum frequency generation are increasingly being used as in situ surface probes. These techniques are coherent and inherently surface sensitive by the nature of the mediums response to intense laser light. Here we will review these two techniques using aqueous corrosion as an example problem. Aqueous corrosion of technologically important materials such as Fe, Ni and Cr proceeds from a reduced metal surface with layer by layer growth of oxide films mitigated by compositional changes in the chemical makeup of the growing film. Passivation of the metal surface is achieved after growth of only a few tens of atomic layers of metal oxide. Surface Second Harmonic Generation and a related nonlinear laser technique, Sum Frequency Generation have demonstrated an ability to probe the surface composition of growing films even in the presence of aqueous solutions. 96 refs., 4 figs

  13. Refrigeration generation using expander-generator units

    Science.gov (United States)

    Klimenko, A. V.; Agababov, V. S.; Koryagin, A. V.; Baidakova, Yu. O.

    2016-05-01

    The problems of using the expander-generator unit (EGU) to generate refrigeration, along with electricity were considered. It is shown that, on the level of the temperatures of refrigeration flows using the EGU, one can provide the refrigeration supply of the different consumers: ventilation and air conditioning plants and industrial refrigerators and freezers. The analysis of influence of process parameters on the cooling power of the EGU, which depends on the parameters of the gas expansion process in the expander and temperatures of cooled environment, was carried out. The schematic diagram of refrigeration generation plant based on EGU is presented. The features and advantages of EGU to generate refrigeration compared with thermotransformer of steam compressive and absorption types were shown, namely: there is no need to use the energy generated by burning fuel to operate the EGU; beneficial use of the heat delivered to gas from the flow being cooled in equipment operating on gas; energy production along with refrigeration generation, which makes it possible to create, using EGU, the trigeneration plants without using the energy power equipment. It is shown that the level of the temperatures of refrigeration flows, which can be obtained by using the EGU on existing technological decompression stations of the transported gas, allows providing the refrigeration supply of various consumers. The information that the refrigeration capacity of an expander-generator unit not only depends on the parameters of the process of expansion of gas flowing in the expander (flow rate, temperatures and pressures at the inlet and outlet) but it is also determined by the temperature needed for a consumer and the initial temperature of the flow of the refrigeration-carrier being cooled. The conclusion was made that the expander-generator units can be used to create trigeneration plants both at major power plants and at small energy.

  14. Critical evaluation of the external occupational exposure in nuclear medicine services in Brazil; Avaliacao critica da exposicao ocupacional externa nos servicos de medicina nuclear no Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Kubo, Ana Luiza Silva Lima

    2016-07-01

    Currently in Brazil (2016), there are 421 Nuclear Medicine Services (NMS). In nuclear medicine, the possibility of occupational internal contamination and external exposure is unavoidable. The chest individual monitoring, to estimate the effective dose, is mandatory, but the extremity monitoring is not always made. The aim of this study was to conduct a survey of data for external exposure of NMS professionals in Brazil from 1987 to 2010, analysing them in terms of trends and comparing them with measurements carried out in this work and in other countries. Although most of the NMS is still located in large urban centres (54% in the Southeast region), there is no state without any NMS. The increasing number of NMS has generated the need for more professionals. In the year 1987, they were 755 workers and, in 2010, 4134, with the following distribution of specialties: 29% of Nuclear Medicine Technicians (NMT), 23% of Nursing professionals, 29% of Physicians and 3% of Physicists. The average annual effective dose reached more than 3.0 mSv in some regions of the country, from 1987 to 2010, but tends to 1.0 mSv in 2010. The highest doses, as expected, are received by NMT and Nursing. The professionals who handle radiopharmaceuticals have their hands much more exposed than the chest. During 2010, only 31% of NMT and 16% of Nursing used extremity dosimeters as compared to chest dosimeters. The data from the measurements indicate that not all individual dosimeters are used properly. Generally, both in the measurements as in national registries, the hand doses were higher for professionals who prepared the radiopharmaceutical (NMT) than those who injected (Nursing). The value measured by chest dosimeters can be used to estimate the equivalent dose to the eye lenses, except for NMT at preparation practices at conventional NMS, where the equivalent dose of the lens is about 2 times higher than the dose at the chest. The most exposed areas of the hands are the tips of the index

  15. Properties of altered soils by alkaline solution: contribution in the performance evaluation of repositories; Propriedades de solos alterados por solucao alcalina: contribuicao na avaliacao de desempenho de repositorios

    Energy Technology Data Exchange (ETDEWEB)

    Calabria, Jaqueline Alves de Almeida

    2015-07-01

    very low for all evaluated samples (less than 20% after 10 days of equilibrium), being the best performance one, the nitosoil sample whose K{sub d} values varied from 11.78 to 63.05 mL.g{sup -1}. In a subsequent step, the clay soil, was submitted to the alkaline solution interaction, in order to investigate possible alterations on the sorption properties and hydraulic conductivity of this soil. Using the sorption parameters, obtained from data fitted isotherms, the retardation factor, R, was estimated for the samples before and after the interaction. It was demonstrated that the alkaline alteration promotes damages to sorption properties of Cs, once the R became significantly smaller (about 1000 times) after the interaction. The hydraulic conductivity in turn increased slightly (3,91x10{sup -8} cm.s{sup -1} to 5,08 x 10{sup -8} cm.s{sup -1}). It was concluded that these changes were due, mainly, to the dissolution of minerals present in the clay soil (kaolinite and quartz), associated with the incorporation of K and Ca from the alkaline solution, resulting, probably, in the formation of hydrated calcium silicate phases. Additionally, the effects of alkaline solution on the properties of a commercial bentonite were studied. Contrary to the clay soil, it was observed a gain in the sorption characteristics, with K{sub d} (Cs) increasing from 760.05 mL.g{sup -1}to 1311.80 mL.g{sup -1}and Q{sub max} from 36.32 mg.g{sup -1}to 52.13 mg.g{sup -1}, with the corresponding increase in the retardation coefficient, R. The dissolution of the clay minerals from the initial sample and the incorporation of Mg, K e Ca coming from the alkaline solution, generating smectite of different kinds, were considered as the main mineralogical changes responsible for the modifications in sorption parameters. The different behavior between the two evaluated samples, soil and bentonite, confirms that the nature and extension of changes observed, when mineral samples interact with alkaline solution

  16. Quantum random number generator

    Science.gov (United States)

    Pooser, Raphael C.

    2016-05-10

    A quantum random number generator (QRNG) and a photon generator for a QRNG are provided. The photon generator may be operated in a spontaneous mode below a lasing threshold to emit photons. Photons emitted from the photon generator may have at least one random characteristic, which may be monitored by the QRNG to generate a random number. In one embodiment, the photon generator may include a photon emitter and an amplifier coupled to the photon emitter. The amplifier may enable the photon generator to be used in the QRNG without introducing significant bias in the random number and may enable multiplexing of multiple random numbers. The amplifier may also desensitize the photon generator to fluctuations in power supplied thereto while operating in the spontaneous mode. In one embodiment, the photon emitter and amplifier may be a tapered diode amplifier.

  17. Steam generator tube extraction

    International Nuclear Information System (INIS)

    Delorme, H.

    1985-05-01

    To enable tube examination on steam generators in service, Framatome has now developed a process for removing sections of steam generator tubes. Tube sections can be removed without being damaged for treating the tube section expanded in the tube sheet

  18. Microwatt thermoelectric generator

    International Nuclear Information System (INIS)

    Goslee, D.E.; Bustard, T.S.

    1976-01-01

    A microwatt thermoelectric generator suitable for implanting in the body is described. The generator utilizes a nuclear energy source. Provision is made for temporary electrical connection to the generator for testing purposes, and for ensuring that the heat generated by the nuclear source does not bypass the pile. Also disclosed is a getter which is resistant to shrinkage during sintering, and a foil configuration for controlling the radiation of heat from the nuclear source to the hot plate of the pile

  19. Microwatt thermoelectric generator

    International Nuclear Information System (INIS)

    Goslee, D.E.

    1976-01-01

    A microwatt thermoelectric generator suitable for implanting in the body is described. The disclosed generator utilizes a nuclear energy source. Provision is made for temporary electrical connection to the generator for testing purposes, and for ensuring that the heat generated by the nuclear source does not bypass the pile. Also disclosed is a getter which is resistant to shrinkage during sintering, and a foil configuration for controlling the radiation of heat from the nuclear source to the hot plate of the pile

  20. Uniform random number generators

    Science.gov (United States)

    Farr, W. R.

    1971-01-01

    Methods are presented for the generation of random numbers with uniform and normal distributions. Subprogram listings of Fortran generators for the Univac 1108, SDS 930, and CDC 3200 digital computers are also included. The generators are of the mixed multiplicative type, and the mathematical method employed is that of Marsaglia and Bray.

  1. Generational Pension Plan Designs

    NARCIS (Netherlands)

    Huang, Xiaohong; Mahieu, Ronald

    2010-01-01

    We propose a generational plan for the occupational pension provision in which people from the same generation are pooled in a generational fund. Each fund can set its own policies independently. This plan provides the benefits of differentiation missing in the prevailing collective plan and the

  2. Consolidated nuclear steam generator

    International Nuclear Information System (INIS)

    Jabsen, F.S.; Schluderberg, D.C.; Paulson, A.E.

    1978-01-01

    An improved system of providing power has a unique generating means for nuclear reactors with a number of steam generators in the form of replaceable modular units of the expendable type to attain the optimum in effective and efficient vaporization of fluid during the generating power. The system is most adaptable to undrground power plants and marine usage

  3. Logarithmic-function generator

    Science.gov (United States)

    Caron, P. R.

    1975-01-01

    Solid-state logarithmic-function generator is compact and provides improved accuracy. Generator includes a stable multivibrator feeding into RC circuit. Resulting exponentially decaying voltage is compared with input signal. Generator output is proportional to time required for exponential voltage to decay from preset reference level to level of input signal.

  4. Generation and Context Memory

    Science.gov (United States)

    Mulligan, Neil W.; Lozito, Jeffrey P.; Rosner, Zachary A.

    2006-01-01

    Generation enhances memory for occurrence but may not enhance other aspects of memory. The present study further delineates the negative generation effect in context memory reported in N. W. Mulligan (2004). First, the negative generation effect occurred for perceptual attributes of the target item (its color and font) but not for extratarget…

  5. Radio-isotope generator

    International Nuclear Information System (INIS)

    Benjamins, H.M.

    1983-01-01

    A device is claimed for interrupting an elution process in a radioisotope generator before an elution vial is entirely filled. The generator is simultaneously exposed to sterile air both in the direction of the generator column and of the elution vial

  6. Motor/generator

    Science.gov (United States)

    Hickam, Christopher Dale [Glasford, IL

    2008-05-13

    A motor/generator is provided for connecting between a transmission input shaft and an output shaft of a prime mover. The motor/generator may include a motor/generator housing, a stator mounted to the motor/generator housing, a rotor mounted at least partially within the motor/generator housing and rotatable about a rotor rotation axis, and a transmission-shaft coupler drivingly coupled to the rotor. The transmission-shaft coupler may include a clamp, which may include a base attached to the rotor and a plurality of adjustable jaws.

  7. Generator for radionuclide

    International Nuclear Information System (INIS)

    Weisner, P.S.; Forrest, T.R.F.

    1985-01-01

    This invention provides a radionuclide generator of the kind in which a parent radionuclide, adsorbed on a column of particulate material, generates a daughter radionuclide which is periodically removed from the column. This invention is particularly concerned with technetium generators using single collection vials. The generator comprises a column, a first reservoir for the eluent, a second reservoir to contain the volume of eluent required for a single elution, and means connecting the first reservoir to the second reservoir and the second reservoir to the column. Such a generator is particularly suitable for operation by vacuum elution

  8. Estimation of the resource and technological prospective of geothermal energy in Mexico (Annexe 3 in 'A vision of year 2030 on the use of the renewable energies in Mexico'); Estimacion del recurso y prospectiva tecnologica de la geotermia en Mexico (Anexo 3 en 'Una vision al 2030 de la utilizacion de las energias renovables en Mexico')

    Energy Technology Data Exchange (ETDEWEB)

    Iglesias R, Eduardo; Arellano G, Victor; Torres R, Rodolfo Joaquin [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2005-08-15

    Due to its individual geologic-structural characteristics, Mexico counts on abundant geothermal resources. At the moment we count on a database that includes 2,332 geothermal manifestations distributed in 27 of the 32 Mexican states, the geothermal resources are classified as high temperature and intermediate or low temperature resources. Those of high temperature can be used for the generation of electrical energy. Those of intermediate to low temperature are more appropriate for direct applications of the geothermal heat. As of today, in Mexico exist four geothermal fields of high temperature that are being exploded for the electrical generation. [Spanish] Debido a sus particulares caracteristicas geologico-estructurales, Mexico cuenta con abundantes recursos geotermicos. Actualmente contamos con una base de datos que incluye 2,332 manifestaciones geotermicas distribuidas en 27 de los 32 estados mexicanos, los recursos geotermicos se clasifican en de alta temperatura y recursos de temperatura intermedia a baja. Los de alta temperatura pueden utilizarse para la generacion de energia electrica. Los de temperatura intermedia a baja son mas apropiados para aplicaciones directas del calor geotermico. Actualmente en Mexico existen cuatro campos geotermicos de alta temperatura que estan siendo explotados para la generacion electrica.

  9. Solar thermoelectric generator

    Science.gov (United States)

    Toberer, Eric S.; Baranowski, Lauryn L.; Warren, Emily L.

    2016-05-03

    Solar thermoelectric generators (STEGs) are solid state heat engines that generate electricity from concentrated sunlight. A novel detailed balance model for STEGs is provided and applied to both state-of-the-art and idealized materials. STEGs can produce electricity by using sunlight to heat one side of a thermoelectric generator. While concentrated sunlight can be used to achieve extremely high temperatures (and thus improved generator efficiency), the solar absorber also emits a significant amount of black body radiation. This emitted light is the dominant loss mechanism in these generators. In this invention, we propose a solution to this problem that eliminates virtually all of the emitted black body radiation. This enables solar thermoelectric generators to operate at higher efficiency and achieve said efficient with lower levels of optical concentration. The solution is suitable for both single and dual axis solar thermoelectric generators.

  10. Designing the next generation (fifth generation computers)

    International Nuclear Information System (INIS)

    Wallich, P.

    1983-01-01

    A description is given of the designs necessary to develop fifth generation computers. An analysis is offered of problems and developments in parallelism, VLSI, artificial intelligence, knowledge engineering and natural language processing. Software developments are outlined including logic programming, object-oriented programming and exploratory programming. Computer architecture is detailed including concurrent computer architecture

  11. Technological Prospective (Chapter 3 in 'A vision of year 2030 on the use of the renewable energies in Mexico'); Prospectiva tecnologica (Capitulo 3 en 'Una vision al 2030 de la utilizacion de las energias renovables en Mexico')

    Energy Technology Data Exchange (ETDEWEB)

    Mulas del Pozo, Pablo [Universidad Autonoma Metropolitana, Mexico, D.F. (Mexico)

    2005-08-15

    In this chapter it is described how the prospective analysis is carried on in: the trash and its transformation into energy that is made through thermal or biological processes; geothermal, where the relation with low and intermediate temperature resources will be differentiated from those of high temperature for electrical power generation; thermo-solar, that is a high temperature system for electrical power generation and low temperature systems for space heating or process heat; photovoltaic, that is the direct conversion of solar radiation into electricity; the wind energy is the advantage of the kinetic energy of the wind; the use of the biomass or its derivatives requires of transformations on the basis of processes of direct combustion; the gasification or pyrolysis to produce, either in direct form or through the production of a synthetic gas, process heat or electricity in facilities and, mini-hydro energy. [Spanish] En este capitulo se describe como es llevado el analisis prospectivo en: la basura y su transformacion en energia que se realiza a traves de procesos termicos o de procesos biologicos; la geotermia donde se distinguira la relacion con los recursos de temperatura baja e intermedia y los de alta temperatura para generacion electrica; la termosolar que es un sistema de alta temperatura para generacion electrica y sistema de baja temperatura para acondicionamiento de espacios o calor de proceso; fotovoltaico que es la conversion directa de la radiacion solar a electricidad; la energia eolica es el aprovechamiento de la energia cinetica del viento; la utilizacion de la biomasa o sus derivados requiere de transformaciones en base a procesos de combustion directa; la gasificacion o pirolisis para producir, o bien en forma directa o a traves de la produccion de un gas sintetico, calor de proceso o electricidad en instalaciones y, la minihidroenergia.

  12. Generational Accounting in Iran

    Directory of Open Access Journals (Sweden)

    Mahdi Salehi

    2013-09-01

    Full Text Available The aim of this paper is to study of the generation accounts for Iranian’s generation. We applied the method of Auerbach, Gokhale and Kotlihoff (1991 on the period 1967-2008 in Iran. Our calculation shows with compare to industrial countries, fiscal burden for Iranian’s population is very chip and that depend on fiscal system in Iran. Except the recent years the rate of tax in Iran has been very low. The generation account for the old people (40 olds is 2117 $ but the future generation (t+1 is 36985 $. The share of male and female, during the years, in this burden is similar. Fiscal burden for Iranian’s generation is low but this population should support other burden that calls inflation. Because when the government do not receive the tax income, a low generation account transfer to price general level.

  13. Sacroiliitis: imaging evaluation; Sacroiliite: avaliacao por imagem

    Energy Technology Data Exchange (ETDEWEB)

    Montandon, Cristiano; Teixeira, Kim-Ir-Sen Santos [Clinicas da Imagem e Multimagem, Goiania, GO (Brazil); Costa, Marlos Augusto Bitencourt; Carvalho, Tarcisio Nunes; Montandon Junior, Marcelo Eustaquio [Universidade Federal de Goias, Goiania, GO (Brazil). Faculdade de Medicina. Dept. de Diagnostico por Imagem]. E-mail: cmontandon@terra.com.br

    2007-01-15

    Sacroiliitis is a non-infectious inflammatory process involving the sacroiliac joint, and is a diagnostic criterion for seronegative spondyloarthropathies. Imaging methods are of great value for confirming the diagnosis of this condition. The present study is a review of cases included in didactic files and in the literature to illustrate the anatomy, techniques, and main imaging findings in x-ray, computed tomography and magnetic resonance imaging for determining the diagnosis of sacroiliitis, also approaching main differential diagnoses. (author)

  14. Distributed generation hits market

    International Nuclear Information System (INIS)

    Anon.

    1997-01-01

    The pace at which vendors are developing and marketing gas turbines and reciprocating engines for small-scale applications may signal the widespread growth of distributed generation. Loosely defined to refer to applications in which power generation equipment is located close to end users who have near-term power capacity needs, distributed generation encompasses a broad range of technologies and load requirements. Disagreement is inevitable, but many industry observers associate distributed generation with applications anywhere from 25 kW to 25 MW. Ten years ago, distributed generation users only represented about 2% of the world market. Today, that figure has increased to about 4 or 5%, and probably could settle in the 20% range within a 3-to-5-year period, according to Michael Jones, San Diego, Calif.-based Solar Turbines Inc. power generation marketing manager. The US Energy Information Administration predicts about 175 GW of generation capacity will be added domestically by 2010. If 20% comes from smaller plants, distributed generation could account for about 35 GW. Even with more competition, it's highly unlikely distributed generation will totally replace current market structures and central stations. Distributed generation may be best suited for making market inroads when and where central systems need upgrading, and should prove its worth when the system can't handle peak demands. Typical applications include small reciprocating engine generators at remote customer sites or larger gas turbines to boost the grid. Additional market opportunities include standby capacity, peak shaving, power quality, cogeneration and capacity rental for immediate demand requirements. Integration of distributed generation systems--using gas-fueled engines, gas-fired combustion engines and fuel cells--can upgrade power quality for customers and reduce operating costs for electric utilities

  15. Third generation nuclear plants

    Science.gov (United States)

    Barré, Bertrand

    2012-05-01

    After the Chernobyl accident, a new generation of Light Water Reactors has been designed and is being built. Third generation nuclear plants are equipped with dedicated systems to insure that if the worst accident were to occur, i.e. total core meltdown, no matter how low the probability of such occurrence, radioactive releases in the environment would be minimal. This article describes the EPR, representative of this "Generation III" and a few of its competitors on the world market.

  16. Modular Stirling Radioisotope Generator

    Science.gov (United States)

    Schmitz, Paul C.; Mason, Lee S.; Schifer, Nicholas A.

    2016-01-01

    High-efficiency radioisotope power generators will play an important role in future NASA space exploration missions. Stirling Radioisotope Generators (SRGs) have been identified as a candidate generator technology capable of providing mission designers with an efficient, high-specific-power electrical generator. SRGs high conversion efficiency has the potential to extend the limited Pu-238 supply when compared with current Radioisotope Thermoelectric Generators (RTGs). Due to budgetary constraints, the Advanced Stirling Radioisotope Generator (ASRG) was canceled in the fall of 2013. Over the past year a joint study by NASA and the Department of Energy (DOE) called the Nuclear Power Assessment Study (NPAS) recommended that Stirling technologies continue to be explored. During the mission studies of the NPAS, spare SRGs were sometimes required to meet mission power system reliability requirements. This led to an additional mass penalty and increased isotope consumption levied on certain SRG-based missions. In an attempt to remove the spare power system, a new generator architecture is considered, which could increase the reliability of a Stirling generator and provide a more fault-tolerant power system. This new generator called the Modular Stirling Radioisotope Generator (MSRG) employs multiple parallel Stirling convertor/controller strings, all of which share the heat from the General Purpose Heat Source (GPHS) modules. For this design, generators utilizing one to eight GPHS modules were analyzed, which provided about 50 to 450 W of direct current (DC) to the spacecraft, respectively. Four Stirling convertors are arranged around each GPHS module resulting in from 4 to 32 Stirling/controller strings. The convertors are balanced either individually or in pairs, and are radiatively coupled to the GPHS modules. Heat is rejected through the housing/radiator, which is similar in construction to the ASRG. Mass and power analysis for these systems indicate that specific

  17. TFTR generator load assessment

    International Nuclear Information System (INIS)

    Heck, F.M.

    1975-10-01

    Typical experimental load demands on the TFTR generators are illustrated based on the electrical characteristics of the field coils, the coil leads, the main bus work, the various auxiliary bus work, the rectifiers, and transformers. The generator MW capacities are shown to be adequate for the proposed experimental operations with allowances made for variations in the final designs. The generator MVA capacities are shown to be adequate provided portions of the TF and EF rectifiers are freewheeled at selected times

  18. Solar fuels generator

    Science.gov (United States)

    Lewis, Nathan S.; Spurgeon, Joshua M.

    2016-10-25

    The solar fuels generator includes an ionically conductive separator between a gaseous first phase and a second phase. A photoanode uses one or more components of the first phase to generate cations during operation of the solar fuels generator. A cation conduit is positioned provides a pathway along which the cations travel from the photoanode to the separator. The separator conducts the cations. A second solid cation conduit conducts the cations from the separator to a photocathode.

  19. Microwatt thermoelectric generator

    International Nuclear Information System (INIS)

    Hittman, F.; Bustard, T.S.

    1976-01-01

    A microwatt thermoelectric generator suitable for implanting in the body is described. The generator utilizes a nuclear energy source. Provision is made for temporary electrical connection to the generator for testing purposes, and for ensuring that the heat generated by the nuclear source does not bypass the pile. Also disclosed is a getter which is resistant to shrinkage during sintering, and a foil configuration for controlling the radiation of heat from the nuclear source to the hot plate of the pile. 2 claims, 4 drawing figures

  20. Microwatt thermoelectric generator

    International Nuclear Information System (INIS)

    Barr, H.N.

    1978-01-01

    A microwatt thermoelectric generator suitable for implanting in the body is described. The disclosed generator utilizes a nuclear energy source. Provision is made for temporary electrical connection to the generator for testing purposes, and for ensuring that the heat generated by the nuclear source does not bypass the pile. Also disclosed is a getter which is resistant to shrinkage during sintering, and a foil configuration for controlling the radiation of heat from the nuclear source to the hot plate of the pile. 4 claims, 4 figures

  1. SMUG: Scientific Music Generator

    DEFF Research Database (Denmark)

    Scirea, Marco; A B Barros, Gabriella; Togelius, Julian

    2015-01-01

    Music is based on the real world. Composers use their day-to-day lives as inspiration to create rhythm and lyrics. Procedural music generators are capable of creating good quality pieces, and while some already use the world as inspiration, there is still much to be explored in this. We describe...... a system to generate lyrics and melodies from real-world data, in particular from academic papers. Through this we want to create a playful experience and establish a novel way of generating content (textual and musical) that could be applied to other domains, in particular to games. For melody generation...

  2. NEGATIVE GATE GENERATOR

    Science.gov (United States)

    Jones, C.S.; Eaton, T.E.

    1958-02-01

    This patent relates to pulse generating circuits and more particularly to rectangular pulse generators. The pulse generator of the present invention incorporates thyratrons as switching elements to discharge a first capacitor through a load resistor to initiate and provide the body of a Pulse, and subsequently dlscharge a second capacitor to impress the potential of its charge, with opposite potential polarity across the load resistor to terminate the pulse. Accurate rectangular pulses in the millimicrosecond range are produced across a low impedance by this generator.

  3. Third generation coaching

    DEFF Research Database (Denmark)

    Stelter, Reinhard

    2014-01-01

    Third generation coaching unfolds a new universe for coaching and coaching psychology in the framework of current social research, new learning theories and discourses about personal leadership. Third generation coaching views coaching in a societal perspective. Coaching has become important...... transformation. Coaching thus facilitates new reflections and perspectives, as well as empowerment and support for self-Bildung processes. Third generation coaching focuses on the coach and the coachee in their narrative collaborative partnership. Unlike first generation coaching, where the goal is to help...

  4. Gearless wind power generator

    Energy Technology Data Exchange (ETDEWEB)

    Soederlund, L.; Ridanpaeae, P.; Vihriaelae, H.; Peraelae, R. [Tampere Univ. of Technology (Finland). Lab. of Electricity and Magnetism

    1998-12-31

    During the wind power generator project a design algorithm for a gearless permanent magnet generator with an axially orientated magnetic flux was developed and a 10 kW model machine was constructed. Utilising the test results a variable wind speed system of 100 kW was designed that incorporates a permanent magnet generator, a frequency converter and a fuzzy controller. This system produces about 5-15% more energy than existing types and stresses to the blades are minimised. The type of generator designed in the project represents in general a gearless solution for slow-speed electrical drives. (orig.)

  5. EPRI steam generator programs

    International Nuclear Information System (INIS)

    Martel, L.J.; Passell, T.O.; Bryant, P.E.C.; Rentler, R.M.

    1977-01-01

    The paper describes the current overall EPRI steam generator program plan and some of the ongoing projects. Because of the recent occurrence of a corrosion phenomenon called ''denting,'' which has affected a number of operating utilities, an expanded program plan is being developed which addresses the broad and urgent needs required to achieve improved steam generator reliability. The goal of improved steam generator reliability will require advances in various technologies and also a management philosophy that encourages conscientious efforts to apply the improved technologies to the design, procurement, and operation of plant systems and components that affect the full life reliability of steam generators

  6. Commanding Generation Y: How Generation X Military Leaders Can Better Utilize Generational Tendencies

    Science.gov (United States)

    2013-03-21

    generation ( Baby Boomers ). Although the profession of arms is a time-honored tradition steeped in discipline...senior leadership generational tendencies. Command; Leadership; Generation ; Baby Boomer ; Generation X; Generation Y Unclass Unclass Unclass UU 32 USMC...enable commanders to better lead Generation Y within the U.S. military. Discussion: Baby Boomers , Generation X, and Generation Y are

  7. Pulsed Corona Discharge Generated By Marx Generator

    Science.gov (United States)

    Sretenovic, G. B.; Obradovic, B. M.; Kovacevic, V. V.; Kuraica, M. M.; Puric J.

    2010-07-01

    The pulsed plasma has a significant role in new environmental protection technologies. As a part of a pulsed corona system for pollution control applications, Marx type repetitive pulse generator was constructed and tested in arrangement with wire-plate corona reactor. We performed electrical measurements, and obtained voltage and current signals, and also power and energy delivered per pulse. Ozone formation by streamer plasma in air was chosen to monitor chemical activity of the pulsed corona discharge.

  8. Wroclaw neutrino event generator

    International Nuclear Information System (INIS)

    Nowak, J A

    2006-01-01

    A neutrino event generator developed by the Wroclaw Neutrino Group is described. The physical models included in the generator are discussed and illustrated with the results of simulations. The considered processes are quasi-elastic scattering and pion production modelled by combining the Δ resonance excitation and deep inelastic scattering

  9. When Generations Collide

    Science.gov (United States)

    Fogg, Piper

    2008-01-01

    When four generations converge in the academic workplace, it can create serious culture clashes. It is happening across college campuses--in offices as diverse as admissions, student affairs, legal affairs, and technology. It is especially striking in the faculty ranks, where generational challenges have extra significance amid recruiting efforts,…

  10. Photovoltaic Bias Generator

    Science.gov (United States)

    2018-02-01

    Department of the Army position unless so designated by other authorized documents. Citation of manufacturer’s or trade names does not constitute an... Interior view of the photovoltaic bias generator showing wrapped-wire side of circuit board...3 Fig. 4 Interior view of the photovoltaic bias generator showing component side of circuit board

  11. Third Generation Coaching

    DEFF Research Database (Denmark)

    Stelter, Reinhard

    2016-01-01

    , Gruppen oder Teams neue Orientierung auf einer tieferen Sinnebene ermöglicht. Im Gegensatz zum Coaching der ersten Generation, bei dem das Erreichen bestimmter, festgeschriebener Ziele im Vordergrund steht, und im Gegensatz zum Coaching der zweiten Generation, in dem wünschenswerte zukünftige...

  12. Hospitality services generate revenue.

    Science.gov (United States)

    Bizouati, S

    1993-01-01

    An increasing number of hospitals are undertaking external revenue-generating activities to supplement their shrinking budgets. Written at the request of Leadership, this article outlines an example of a successful catering service -- a money-generating business that more Canadian hospitals could profitably consider.

  13. Aerodynamically shaped vortex generators

    DEFF Research Database (Denmark)

    Hansen, Martin Otto Laver; Velte, Clara Marika; Øye, Stig

    2016-01-01

    An aerodynamically shaped vortex generator has been proposed, manufactured and tested in a wind tunnel. The effect on the overall performance when applied on a thick airfoil is an increased lift to drag ratio compared with standard vortex generators. Copyright © 2015 John Wiley & Sons, Ltd....

  14. Understanding portable generators

    Energy Technology Data Exchange (ETDEWEB)

    Hills, A.; Hawkins, B. [Guelph Univ., ON (Canada); Clarke, S. [Ontario Ministry of Agriculture, Food and Rural Affairs, Toronto, ON (Canada)

    2000-06-01

    This factsheet is intended to help consumers select a small portable generator for emergency electrical needs. Interest in standby generators has been heightened ever since the prolonged power outage in Eastern Ontario and Southwestern Quebec during the 1998 ice storm and the concern over Y2K related outages. Farmers, in particular, have been reassessing their need for emergency electrical power supply. This document presents some of the factors that should be considered when purchasing and operating a portable generator in the 3 to 12 kW size. It provides a detailed review of power quality and describes the use of tractor-driven power-take-off generators of 15 kW and larger. Several manufacturers make portable generators in many sizes with a whole range of features. This document includes a table depicting generator Feature/Benefit analysis to help consumers understand the differences between features and benefits. A second table provides a check list for generator feature/benefits. Specific details for the operations of various generators are available from manufacturers, distributors and electrical contractors. 2 tabs., 1 fig.

  15. Generative Processes: Thick Drawing

    Science.gov (United States)

    Wallick, Karl

    2012-01-01

    This article presents techniques and theories of generative drawing as a means for developing complex content in architecture design studios. Appending the word "generative" to drawing adds specificity to the most common representation tool and clarifies that such drawings are not singularly about communication or documentation but are…

  16. Generation Y Perspectives

    Science.gov (United States)

    Skytland, Nicholas; Painting, Kristen; Barrera, Aaron; Fitzpatrick, Garret

    2008-01-01

    This viewgraph presentation reviews the perception of NASA and the importance of engaging those people born between 1977 and 2000, also known as Generation Y. It examines some of the differences in attitudes and experiences, and how it reflects on how they view NASA. It also discusses use of the internet in connecting to the people from that generation.

  17. Neutron generator control system

    International Nuclear Information System (INIS)

    Peelman, H.E.; Bridges, J.R.

    1981-01-01

    A method is described of controlling the neutron output of a neutron generator tube used in neutron well logging. The system operates by monitoring the target beam current and comparing a function of this current with a reference voltage level to develop a control signal used in a series regulator to control the replenisher current of the neutron generator tube. (U.K.)

  18. Generation IV national program

    International Nuclear Information System (INIS)

    Preville, M.; Sadhankar, R.; Brady, D.

    2007-01-01

    This paper outlines the Generation IV National Program. This program involves evolutionary and innovative design with significantly higher efficiencies (∼50% compared to present ∼30%) - sustainable, economical, safe, reliable and proliferation resistant - for future energy security. The Generation IV Forum (GIF) effectively leverages the resources of the participants to meet these goals. Ten countries signed the GIF Charter in 2001

  19. Solar Fuel Generator

    Science.gov (United States)

    Lewis, Nathan S. (Inventor); West, William C. (Inventor)

    2017-01-01

    The disclosure provides conductive membranes for water splitting and solar fuel generation. The membranes comprise an embedded semiconductive/photoactive material and an oxygen or hydrogen evolution catalyst. Also provided are chassis and cassettes containing the membranes for use in fuel generation.

  20. The Next Great Generation?

    Science.gov (United States)

    Brownstein, Andrew

    2000-01-01

    Discusses ideas from a new book, "Millennials Rising: The Next Great Generation," (by Neil Howe and William Strauss) suggesting that youth culture is on the cusp of a radical shift with the generation beginning with this year's college freshmen who are typically team oriented, optimistic, and poised for greatness on a global scale. Includes a…

  1. OMG: Open molecule generator

    NARCIS (Netherlands)

    Peironcely, J.E.; Rojas-Chertó, M.; Fichera, D.; Reijmers, T.; Coulier, L.; Faulon, J.-L.; Hankemeier, T.

    2012-01-01

    Computer Assisted Structure Elucidation has been used for decades to discover the chemical structure of unknown compounds. In this work we introduce the first open source structure generator, Open Molecule Generator (OMG), which for a given elemental composition produces all non-isomorphic chemical

  2. Experience and Its Generation

    Science.gov (United States)

    Youqing, Chen

    2006-01-01

    Experience is an activity that arouses emotions and generates meanings based on vivid sensation and profound comprehension. It is emotional, meaningful, and personal, playing a key role in the course of forming and developing one's qualities. The psychological process of experience generation consists of such links as sensing things, arousing…

  3. Experience and Its Generation

    Institute of Scientific and Technical Information of China (English)

    Chen Youqing

    2006-01-01

    Experience iS an activity that arouses emotions and generates meanings based on vivid sensation and profound compreh ension.It iS emotional,meaningful,and personal,playing a key role in the course of forming and developing one'S qualities.The psychological process of experience generation consists of such links as sensing things,arousing emotions,promoting comprehension and association,generating insights and meanings,and deepening emotional responses.Undergoing things personally by means of direct sensation,taking part in activities,and living life are the most important preconditions of experience generation.Emotional influence,situational edification,and arts edification ale extemal factors that induce experience generation.

  4. Impacts on power generation

    International Nuclear Information System (INIS)

    Myers, J.; Sidebotton, P.

    1998-01-01

    The future impact of the arrival of natural gas in the Maritime provinces on electricity generation in the region was discussed. Currently, electrical generation sources in Nova Scotia include hydro generation (9 per cent), coal generation (80 per cent), heavy fuel oil generation (8 per cent), and light oil, wood chips and purchased power (3 per cent). It is expected that with the introduction of natural gas electric utilities will take advantage of new gas combustion turbines which have high efficiency rates. An overview of Westcoast Power's operations across Canada was also presented. The Company has three projects in the Maritimes - the Courtney Bay project in New Brunswick, the Bayside Power project, the Irving Paper project - in addition to the McMahon cogeneration plant in Taylor, B.C. figs

  5. Quantum random number generator

    Science.gov (United States)

    Soubusta, Jan; Haderka, Ondrej; Hendrych, Martin

    2001-03-01

    Since reflection or transmission of a quantum particle on a beamsplitter is inherently random quantum process, a device built on this principle does not suffer from drawbacks of neither pseudo-random computer generators or classical noise sources. Nevertheless, a number of physical conditions necessary for high quality random numbers generation must be satisfied. Luckily, in quantum optics realization they can be well controlled. We present an easy random number generator based on the division of weak light pulses on a beamsplitter. The randomness of the generated bit stream is supported by passing the data through series of 15 statistical test. The device generates at a rate of 109.7 kbit/s.

  6. Procedure generation and verification

    International Nuclear Information System (INIS)

    Sheely, W.F.

    1986-01-01

    The Department of Energy has used Artificial Intelligence of ''AI'' concepts to develop two powerful new computer-based techniques to enhance safety in nuclear applications. The Procedure Generation System, and the Procedure Verification System, can be adapted to other commercial applications, such as a manufacturing plant. The Procedure Generation System can create a procedure to deal with the off-normal condition. The operator can then take correct actions on the system in minimal time. The Verification System evaluates the logic of the Procedure Generator's conclusions. This evaluation uses logic techniques totally independent of the Procedure Generator. The rapid, accurate generation and verification of corrective procedures can greatly reduce the human error, possible in a complex (stressful/high stress) situation

  7. EGG: Empirical Galaxy Generator

    Science.gov (United States)

    Schreiber, C.; Elbaz, D.; Pannella, M.; Merlin, E.; Castellano, M.; Fontana, A.; Bourne, N.; Boutsia, K.; Cullen, F.; Dunlop, J.; Ferguson, H. C.; Michałowski, M. J.; Okumura, K.; Santini, P.; Shu, X. W.; Wang, T.; White, C.

    2018-04-01

    The Empirical Galaxy Generator (EGG) generates fake galaxy catalogs and images with realistic positions, morphologies and fluxes from the far-ultraviolet to the far-infrared. The catalogs are generated by egg-gencat and stored in binary FITS tables (column oriented). Another program, egg-2skymaker, is used to convert the generated catalog into ASCII tables suitable for ingestion by SkyMaker (ascl:1010.066) to produce realistic high resolution images (e.g., Hubble-like), while egg-gennoise and egg-genmap can be used to generate the low resolution images (e.g., Herschel-like). These tools can be used to test source extraction codes, or to evaluate the reliability of any map-based science (stacking, dropout identification, etc.).

  8. TFTR Motor Generator

    International Nuclear Information System (INIS)

    Murray, J.G.; Bronner, G.; Horton, M.

    1977-01-01

    A general description is given of 475 MVA pulsed motor generators for TFTR at Princeton Plasma Physics Laboratory. Two identical generators operating in parallel are capable of supplying 950 MVA for an equivalent square pulse of 6.77 seconds and 4,500 MJ at 0.7 power factor to provide the energy for the pulsed electrical coils and heating system for TFTR. The description includes the operational features of the 15,000 HP wound rotor motors driving each generator with its starting equipment and cycloconverter for controlling speed, power factor, and regulating line voltage during load pulsing where the generator speed changes from 87.5 to 60 Hz frequency variation to provide the 4,500 MJ or energy. The special design characteristics such as fatigue stress calculations for 10 6 cycles of operation, forcing factor on exciter to provide regulation, and low generator impedance are reviewed

  9. Steam generator life management

    International Nuclear Information System (INIS)

    Tapping, R.L.; Nickerson, J.; Spekkens, P.; Maruska, C.

    1998-01-01

    Steam generators are a critical component of a nuclear power reactor, and can contribute significantly to station unavailability, as has been amply demonstrated in Pressurized Water Reactors (PWRs). CANDU steam generators are not immune to steam generator degradation, and the variety of CANDU steam generator designs and tube materials has led to some unexpected challenges. However, aggressive remedial actions, and careful proactive maintenance activities, have led to a decrease in steam generator-related station unavailability of Canadian CANDUs. AECL and the CANDU utilities have defined programs that will enable existing or new steam generators to operate effectively for 40 years. Research and development work covers corrosion and mechanical degradation of tube bundles and internals, chemistry, thermal hydraulics, fouling, inspection and cleaning, as well as provision for specially tool development for specific problem solving. A major driving force is development of CANDU-specific fitness-for-service guidelines, including appropriate inspection and monitoring technology to measure steam generator condition. Longer-range work focuses on development of intelligent on-line monitoring for the feedwater system and steam generator. New designs have reduced risk of corrosion and fouling, are more easily inspected and cleaned, and are less susceptible to mechanical damage. The Canadian CANDU utilities have developed programs for remedial actions to combat degradation of performance (Gentilly-2, Point Lepreau, Bruce A/B, Pickering A/B), and have developed strategic plans to ensure that good future operation is ensured. This report shows how recent advances in cleaning technology are integrated into a life management strategy, discusses downcomer flow measurement as a means of monitoring steam generator condition, and describes recent advances in hideout return as a life management tool. The research and development program, as well as operating experience, has identified

  10. Compact neutron generator

    Science.gov (United States)

    Leung, Ka-Ngo; Lou, Tak Pui

    2005-03-22

    A compact neutron generator has at its outer circumference a toroidal shaped plasma chamber in which a tritium (or other) plasma is generated. A RF antenna is wrapped around the plasma chamber. A plurality of tritium ion beamlets are extracted through spaced extraction apertures of a plasma electrode on the inner surface of the toroidal plasma chamber and directed inwardly toward the center of neutron generator. The beamlets pass through spaced acceleration and focusing electrodes to a neutron generating target at the center of neutron generator. The target is typically made of titanium tubing. Water is flowed through the tubing for cooling. The beam can be pulsed rapidly to achieve ultrashort neutron bursts. The target may be moved rapidly up and down so that the average power deposited on the surface of the target may be kept at a reasonable level. The neutron generator can produce fast neutrons from a T-T reaction which can be used for luggage and cargo interrogation applications. A luggage or cargo inspection system has a pulsed T-T neutron generator or source at the center, surrounded by associated gamma detectors and other components for identifying explosives or other contraband.

  11. OMG: Open Molecule Generator.

    Science.gov (United States)

    Peironcely, Julio E; Rojas-Chertó, Miguel; Fichera, Davide; Reijmers, Theo; Coulier, Leon; Faulon, Jean-Loup; Hankemeier, Thomas

    2012-09-17

    Computer Assisted Structure Elucidation has been used for decades to discover the chemical structure of unknown compounds. In this work we introduce the first open source structure generator, Open Molecule Generator (OMG), which for a given elemental composition produces all non-isomorphic chemical structures that match that elemental composition. Furthermore, this structure generator can accept as additional input one or multiple non-overlapping prescribed substructures to drastically reduce the number of possible chemical structures. Being open source allows for customization and future extension of its functionality. OMG relies on a modified version of the Canonical Augmentation Path, which grows intermediate chemical structures by adding bonds and checks that at each step only unique molecules are produced. In order to benchmark the tool, we generated chemical structures for the elemental formulas and substructures of different metabolites and compared the results with a commercially available structure generator. The results obtained, i.e. the number of molecules generated, were identical for elemental compositions having only C, O and H. For elemental compositions containing C, O, H, N, P and S, OMG produces all the chemically valid molecules while the other generator produces more, yet chemically impossible, molecules. The chemical completeness of the OMG results comes at the expense of being slower than the commercial generator. In addition to being open source, OMG clearly showed the added value of constraining the solution space by using multiple prescribed substructures as input. We expect this structure generator to be useful in many fields, but to be especially of great importance for metabolomics, where identifying unknown metabolites is still a major bottleneck.

  12. OMG: Open Molecule Generator

    Directory of Open Access Journals (Sweden)

    Peironcely Julio E

    2012-09-01

    Full Text Available Abstract Computer Assisted Structure Elucidation has been used for decades to discover the chemical structure of unknown compounds. In this work we introduce the first open source structure generator, Open Molecule Generator (OMG, which for a given elemental composition produces all non-isomorphic chemical structures that match that elemental composition. Furthermore, this structure generator can accept as additional input one or multiple non-overlapping prescribed substructures to drastically reduce the number of possible chemical structures. Being open source allows for customization and future extension of its functionality. OMG relies on a modified version of the Canonical Augmentation Path, which grows intermediate chemical structures by adding bonds and checks that at each step only unique molecules are produced. In order to benchmark the tool, we generated chemical structures for the elemental formulas and substructures of different metabolites and compared the results with a commercially available structure generator. The results obtained, i.e. the number of molecules generated, were identical for elemental compositions having only C, O and H. For elemental compositions containing C, O, H, N, P and S, OMG produces all the chemically valid molecules while the other generator produces more, yet chemically impossible, molecules. The chemical completeness of the OMG results comes at the expense of being slower than the commercial generator. In addition to being open source, OMG clearly showed the added value of constraining the solution space by using multiple prescribed substructures as input. We expect this structure generator to be useful in many fields, but to be especially of great importance for metabolomics, where identifying unknown metabolites is still a major bottleneck.

  13. Superconducting current generators

    International Nuclear Information System (INIS)

    Genevey, P.

    1970-01-01

    After a brief summary of the principle of energy storage and liberation with superconducting coils,two current generators are described that create currents in the range 600 to 1400 A, used for two storage experiments of 25 kJ and 50 kJ respectively. The two current generators are: a) a flux pump and b) a superconducting transformer. Both could be developed into more powerful units. The study shows the advantage of the transformer over the flux pump in order to create large currents. The efficiencies of the two generators are 95 per cent and 40 to 60 per cent respectively. (author) [fr

  14. Random number generation

    International Nuclear Information System (INIS)

    Coveyou, R.R.

    1974-01-01

    The subject of random number generation is currently controversial. Differing opinions on this subject seem to stem from implicit or explicit differences in philosophy; in particular, from differing ideas concerning the role of probability in the real world of physical processes, electronic computers, and Monte Carlo calculations. An attempt is made here to reconcile these views. The role of stochastic ideas in mathematical models is discussed. In illustration of these ideas, a mathematical model of the use of random number generators in Monte Carlo calculations is constructed. This model is used to set up criteria for the comparison and evaluation of random number generators. (U.S.)

  15. PULSE SYNTHESIZING GENERATOR

    Science.gov (United States)

    Kerns, Q.A.

    1963-08-01

    >An electronlc circuit for synthesizing electrical current pulses having very fast rise times includes several sinewave generators tuned to progressively higher harmonic frequencies with signal amplitudes and phases selectable according to the Fourier series of the waveform that is to be synthesized. Phase control is provided by periodically triggering the generators at precisely controlled times. The outputs of the generators are combined in a coaxial transmission line. Any frequency-dependent delays that occur in the transmission line can be readily compensated for so that the desired signal wave shape is obtained at the output of the line. (AEC)

  16. Coal-fired generation

    CERN Document Server

    Breeze, Paul

    2015-01-01

    Coal-Fired Generation is a concise, up-to-date and readable guide providing an introduction to this traditional power generation technology. It includes detailed descriptions of coal fired generation systems, demystifies the coal fired technology functions in practice as well as exploring the economic and environmental risk factors. Engineers, managers, policymakers and those involved in planning and delivering energy resources will find this reference a valuable guide, to help establish a reliable power supply address social and economic objectives. Focuses on the evolution of the traditio

  17. Graph Generator Survey

    Energy Technology Data Exchange (ETDEWEB)

    Lothian, Joshua [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Powers, Sarah S. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Sullivan, Blair D. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Baker, Matthew B. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Schrock, Jonathan [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Poole, Stephen W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2013-10-01

    The benchmarking effort within the Extreme Scale Systems Center at Oak Ridge National Laboratory seeks to provide High Performance Computing benchmarks and test suites of interest to the DoD sponsor. The work described in this report is a part of the effort focusing on graph generation. A previously developed benchmark, SystemBurn, allowed the emulation of different application behavior profiles within a single framework. To complement this effort, similar capabilities are desired for graph-centric problems. This report examines existing synthetic graph generator implementations in preparation for further study on the properties of their generated synthetic graphs.

  18. Power generation technologies

    CERN Document Server

    Breeze, Paul

    2014-01-01

    The new edition of Power Generation Technologies is a concise and readable guide that provides an introduction to the full spectrum of currently available power generation options, from traditional fossil fuels and the better established alternatives such as wind and solar power, to emerging renewables such as biomass and geothermal energy. Technology solutions such as combined heat and power and distributed generation are also explored. However, this book is more than just an account of the technologies - for each method the author explores the economic and environmental costs and risk factor

  19. Harmonic arbitrary waveform generator

    Science.gov (United States)

    Roberts, Brock Franklin

    2017-11-28

    High frequency arbitrary waveforms have applications in radar, communications, medical imaging, therapy, electronic warfare, and charged particle acceleration and control. State of the art arbitrary waveform generators are limited in the frequency they can operate by the speed of the Digital to Analog converters that directly create their arbitrary waveforms. The architecture of the Harmonic Arbitrary Waveform Generator allows the phase and amplitude of the high frequency content of waveforms to be controlled without taxing the Digital to Analog converters that control them. The Harmonic Arbitrary Waveform Generator converts a high frequency input, into a precision, adjustable, high frequency arbitrary waveform.

  20. Nanosecond neutron generator

    International Nuclear Information System (INIS)

    Lobov, S.I.; Pavlovskaya, N.G.; Pukhov, S.P.

    1991-01-01

    High-voltage nanosecond neutron generator for obtaining neutrons in D-T reaction is described. Yield of 6x10 6 neutron/pulse was generated in a sealed gas-filled diode with a target on the cathode by accelerating pulse voltage of approximately 0.5 MV and length at half-height of 0.5 ns and deuterium pressure of 6x10 -2 Torr. Ways of increasing neutron yield and possibilities of creating generators of nanosecond neutron pulses with great service life are considered

  1. PC Scene Generation

    Science.gov (United States)

    Buford, James A., Jr.; Cosby, David; Bunfield, Dennis H.; Mayhall, Anthony J.; Trimble, Darian E.

    2007-04-01

    AMRDEC has successfully tested hardware and software for Real-Time Scene Generation for IR and SAL Sensors on COTS PC based hardware and video cards. AMRDEC personnel worked with nVidia and Concurrent Computer Corporation to develop a Scene Generation system capable of frame rates of at least 120Hz while frame locked to an external source (such as a missile seeker) with no dropped frames. Latency measurements and image validation were performed using COTS and in-house developed hardware and software. Software for the Scene Generation system was developed using OpenSceneGraph.

  2. Philosophy of power generation

    International Nuclear Information System (INIS)

    Amein, H.; Joyia, Y.; Qureshi, M.N.; Asif, M.

    1995-01-01

    In view of the huge power demand in future, the capital investment requirements for the development of power projects to meet the future energy requirements are so alarming that public sector alone cannot manage to raise funds and participation of the private sector in power generation development has become imperative. This paper discusses a power generation philosophy based on preference to the exploitation of indigenous resources and participation of private sector. In order to have diversification in generation resources, due consideration has been given to the development of nuclear power and even non-conventional but promising technologies of solar, wind, biomass and geothermal etc. (author)

  3. French steam generator

    International Nuclear Information System (INIS)

    Remond, A.

    1986-01-01

    After recalling the potential damage mode of tubes of steam generator, the author recalls the safety criteria used in France. The improvements and the process of damage prejudice and reparation for tubular bundle are presented [fr

  4. Auxiliary Deep Generative Models

    DEFF Research Database (Denmark)

    Maaløe, Lars; Sønderby, Casper Kaae; Sønderby, Søren Kaae

    2016-01-01

    Deep generative models parameterized by neural networks have recently achieved state-of-the-art performance in unsupervised and semi-supervised learning. We extend deep generative models with auxiliary variables which improves the variational approximation. The auxiliary variables leave...... the generative model unchanged but make the variational distribution more expressive. Inspired by the structure of the auxiliary variable we also propose a model with two stochastic layers and skip connections. Our findings suggest that more expressive and properly specified deep generative models converge...... faster with better results. We show state-of-the-art performance within semi-supervised learning on MNIST (0.96%), SVHN (16.61%) and NORB (9.40%) datasets....

  5. Airburst-Generated Tsunamis

    Science.gov (United States)

    Berger, Marsha; Goodman, Jonathan

    2018-04-01

    This paper examines the questions of whether smaller asteroids that burst in the air over water can generate tsunamis that could pose a threat to distant locations. Such airburst-generated tsunamis are qualitatively different than the more frequently studied earthquake-generated tsunamis, and differ as well from tsunamis generated by asteroids that strike the ocean. Numerical simulations are presented using the shallow water equations in several settings, demonstrating very little tsunami threat from this scenario. A model problem with an explicit solution that demonstrates and explains the same phenomena found in the computations is analyzed. We discuss the question of whether compressibility and dispersion are important effects that should be included, and show results from a more sophisticated model problem using the linearized Euler equations that begins to addresses this.

  6. The nuclear power generation

    International Nuclear Information System (INIS)

    Serres, R.

    1999-01-01

    The French nuclear generating industry is highly competitive. The installations have an average age of fifteen years and are half way through their expected life. Nuclear power accounts for 70% of the profits of the French generating company, EDF. Nuclear generation has a minimal effect on the atmosphere and France has a level of CO 2 emissions, thought to be the main cause of the greenhouse effect, half that of Europe as a whole. The air in France is purer than in neighbouring countries, mainly because 75% of all electrical power is generated in nuclear plants and 15% in hydroelectric stations. The operations and maintenance of French nuclear power plants in the service and distribution companies out of a total of 100 000 employees in all, 90 % of whom are based in mainland France. (authors)

  7. Rhodium-103m generator

    International Nuclear Information System (INIS)

    Mamadaliev, N.; Levin, V.I.; Malinin, A.B.

    1978-01-01

    103 Pd separated from metal rhodium irradiated with deuterons has been used without a carrier for sup( 03m)Rh generator The generator of sup(103m)Rh is a column 6mm in diameter filled with an anionite in Cl - form (Dowex-2,8,200-400 mesh) with an adsorbed parent isotope of 103 Pd. As a result of its decay, a 103 Rh daughter isotope is accumulated, which can be washed out from the generator from time to time with a corresponding solution. To prepare the generator, 0.5g of the resin with an adsorbed 103 Pd is charged into the column containing 1g of the same resin. Washing out with 2N HCl yields more than 90% of sup(103m)Rh with a radionuclide purity of more than 99.99%

  8. Rechargeable radioactive isotope generator

    International Nuclear Information System (INIS)

    Thornton, A.K.; Cerone, F.E.

    1978-01-01

    The description is given of a rechargeable radioactive isotope generator having the following features: a box containing a transport shield, a shielded generator including elements for the absorption and holding of the parent isotope, an eluant tank, a first pipe causing this tank to communicate with the transport shield, a second pipe causing this transport shield to communicate with the shielded generator and a third pipe placing the shielded generator in communication with the outside of the unit. It also includes a shelf across the external front part of the unit a part of which is shielded by external components, a shielded elution flask in which the eluate is poured and a filter set at a point between the flask and the third pipe [fr

  9. Standard Firebrand Generator

    Data.gov (United States)

    Federal Laboratory Consortium — This apparatus, developed at EL, has been constructed to generate a controlled and repeatable size and mass distribution of glowing firebrands. The purpose of NIST...

  10. Generators for Miranda

    Energy Technology Data Exchange (ETDEWEB)

    Angiolini, G.; Borgna, H.; Garcia, A.; Fernandez, M.; Piriz, H.; Verdu, C. [IMPSA Hydrogenerators (Argentina)

    2000-10-01

    The three generators at the Miranda hydroelectric power plant on the Araguari river northwest of Belo Horizonte in the state of Minas Gerais began operation in 1998. All the electromechanical equipment for the project was supplied by IMPSA. The generators, which are driven by Francis turbines, are vertical shaft, three-phase, salient-pole synchronous machines with an output of 137 MVA. The generators successfully completed a series of studies and trials before commercial operation began and Companhia Energetica de Minas Gerais (CEMIG) is considering increasing the operation power to 150 MVA. The specification and design of the electrical aspects, stator winding, rotor, bearings, shaft line, generator cooling system, excitation system and monitoring systems are described. Electromagnetic requirements and acceptance testing results are given in two summary tables.

  11. Financing Distributed Generation

    Energy Technology Data Exchange (ETDEWEB)

    Walker, A.

    2001-06-29

    This paper introduces the engineer who is undertaking distributed generation projects to a wide range of financing options. Distributed generation systems (such as internal combustion engines, small gas turbines, fuel cells and photovoltaics) all require an initial investment, which is recovered over time through revenues or savings. An understanding of the cost of capital and financing structures helps the engineer develop realistic expectations and not be offended by the common requirements of financing organizations. This paper discusses several mechanisms for financing distributed generation projects: appropriations; debt (commercial bank loan); mortgage; home equity loan; limited partnership; vendor financing; general obligation bond; revenue bond; lease; Energy Savings Performance Contract; utility programs; chauffage (end-use purchase); and grants. The paper also discusses financial strategies for businesses focusing on distributed generation: venture capital; informal investors (''business angels''); bank and debt financing; and the stock market.

  12. Steam generator water lancing

    International Nuclear Information System (INIS)

    Kamler, F.; Schneider, W.

    1992-01-01

    The tubesheet and tube support plate deposits in CANDU steam generators are notable for their hardness. Also notable is the wide variety of steam generator access situations. Because of the sludge hardness and the difficulty of the access, traditional water lancing processes which directed jets from the central tube free lane or from the periphery of the bundle have proven unsuitable. This has led to the need for some very unique inter tube water lancing devices which could direct powerful water jets directly onto the deposits. This type of process was applied to the upper broached plates of the Bruce A steam generators, which had become severely blocked. It has since been applied to various other steam generator situations. This paper describes the flexlance equipment development, qualification, and performance in the various CANDU applications. 4 refs., 2 tabs., 7 figs

  13. Financing Distributed Generation

    International Nuclear Information System (INIS)

    Walker, A.

    2001-01-01

    This paper introduces the engineer who is undertaking distributed generation projects to a wide range of financing options. Distributed generation systems (such as internal combustion engines, small gas turbines, fuel cells and photovoltaics) all require an initial investment, which is recovered over time through revenues or savings. An understanding of the cost of capital and financing structures helps the engineer develop realistic expectations and not be offended by the common requirements of financing organizations. This paper discusses several mechanisms for financing distributed generation projects: appropriations; debt (commercial bank loan); mortgage; home equity loan; limited partnership; vendor financing; general obligation bond; revenue bond; lease; Energy Savings Performance Contract; utility programs; chauffage (end-use purchase); and grants. The paper also discusses financial strategies for businesses focusing on distributed generation: venture capital; informal investors (''business angels''); bank and debt financing; and the stock market

  14. Voltage regulator for generator

    Energy Technology Data Exchange (ETDEWEB)

    Naoi, K

    1989-01-17

    It is an object of this invention to provide a voltage regulator for a generator charging a battery, wherein even if the ambient temperature at the voltage regulator rises abnormally high, possible thermal breakage of the semiconductor elements constituting the voltage regulator can be avoided. A feature of this invention is that the semiconductor elements can be protected from thermal breakage, even at an abnormal ambient temperature rise at the voltage regulator for the battery charging generator, by controlling a maximum conduction ratio of a power transistor in the voltage regulator in accordance with the temperature at the voltage regulator. This is achieved through a switching device connected in series to the field coil of the generator and adapted to be controlled in accordance with an output voltage of the generator and the ambient temperature at the voltage regulator. 6 figs.

  15. Wind electric power generation

    International Nuclear Information System (INIS)

    Koch, M.K.; Wind, L.; Canter, B.; Moeller, T.

    2001-01-01

    The monthly statistics of wind electric power generation in Denmark are compiled from information given by the owners of the private wind turbines. For each wind turbine the name of the site and of the type of turbine is given, and the power generation data are given for the month in question together with the total production in 1999 and 2000. Also the data of operation start are given. On the map of Denmark the sites of the wind turbines are marked. (CLS)

  16. Wind electric power generation

    International Nuclear Information System (INIS)

    Koch, M. K.; Wind, L.; Canter, B.; Moeller, T.

    2002-01-01

    The monthly statistics of wind electric power generation in Denmark are compiled from information given by the owners of the private wind turbines. For each wind turbine the name of the site and of the type of turbine is given, and the power generation data are given for the month in question together with the total production in 2000 and 2001. Also the data of operation start are given. On the map of Denmark the sites of the wind turbines are marked. (SM)

  17. Automated lattice data generation

    Directory of Open Access Journals (Sweden)

    Ayyar Venkitesh

    2018-01-01

    Full Text Available The process of generating ensembles of gauge configurations (and measuring various observables over them can be tedious and error-prone when done “by hand”. In practice, most of this procedure can be automated with the use of a workflow manager. We discuss how this automation can be accomplished using Taxi, a minimal Python-based workflow manager built for generating lattice data. We present a case study demonstrating this technology.

  18. The Aeolian Asynchronous Generator

    Directory of Open Access Journals (Sweden)

    Ionel Dragomirescu

    2008-10-01

    Full Text Available The production of the electric energy with lower costs could be realized with the help of the aeolian electric central. In these centrals we can use the squirrel cage asynchronous generators, because these machines are the most safety in function and easy exploited. This work show the function analyzing of the asynchronous generator having on involving torque depending on the square wind speed, the air-density and on the construction of the wing spiral.

  19. Automated lattice data generation

    Science.gov (United States)

    Ayyar, Venkitesh; Hackett, Daniel C.; Jay, William I.; Neil, Ethan T.

    2018-03-01

    The process of generating ensembles of gauge configurations (and measuring various observables over them) can be tedious and error-prone when done "by hand". In practice, most of this procedure can be automated with the use of a workflow manager. We discuss how this automation can be accomplished using Taxi, a minimal Python-based workflow manager built for generating lattice data. We present a case study demonstrating this technology.

  20. Quad precision delay generator

    International Nuclear Information System (INIS)

    Krishnan, Shanti; Gopalakrishnan, K.R.; Marballi, K.R.

    1997-01-01

    A Quad Precision Delay Generator delays a digital edge by a programmed amount of time, varying from nanoseconds to microseconds. The output of this generator has an amplitude of the order of tens of volts and rise time of the order of nanoseconds. This was specifically designed and developed to meet the stringent requirements of the plasma focus experiments. Plasma focus is a laboratory device for producing and studying nuclear fusion reactions in hot deuterium plasma. 3 figs

  1. Steam generator tube failures

    International Nuclear Information System (INIS)

    MacDonald, P.E.; Shah, V.N.; Ward, L.W.; Ellison, P.G.

    1996-04-01

    A review and summary of the available information on steam generator tubing failures and the impact of these failures on plant safety is presented. The following topics are covered: pressurized water reactor (PWR), Canadian deuterium uranium (CANDU) reactor, and Russian water moderated, water cooled energy reactor (VVER) steam generator degradation, PWR steam generator tube ruptures, the thermal-hydraulic response of a PWR plant with a faulted steam generator, the risk significance of steam generator tube rupture accidents, tubing inspection requirements and fitness-for-service criteria in various countries, and defect detection reliability and sizing accuracy. A significant number of steam generator tubes are defective and are removed from service or repaired each year. This wide spread damage has been caused by many diverse degradation mechanisms, some of which are difficult to detect and predict. In addition, spontaneous tube ruptures have occurred at the rate of about one every 2 years over the last 20 years, and incipient tube ruptures (tube failures usually identified with leak detection monitors just before rupture) have been occurring at the rate of about one per year. These ruptures have caused complex plant transients which have not always been easy for the reactor operators to control. Our analysis shows that if more than 15 tubes rupture during a main steam line break, the system response could lead to core melting. Although spontaneous and induced steam generator tube ruptures are small contributors to the total core damage frequency calculated in probabilistic risk assessments, they are risk significant because the radionuclides are likely to bypass the reactor containment building. The frequency of steam generator tube ruptures can be significantly reduced through appropriate and timely inspections and repairs or removal from service

  2. Dust devil generation

    International Nuclear Information System (INIS)

    G Onishchenko, O; A Pokhotelov, O; Horton, W; Stenflo, L

    2014-01-01

    The equations describing axi-symmetric nonlinear internal gravity waves in an unstable atmosphere are derived. A hydrodynamic model of a dust devil generation mechanism in such an atmosphere is investigated. It is shown that in an unstably stratified atmosphere the convective plumes with poloidal motion can grow exponentially. Furthermore, it is demonstrated that these convective plumes in an atmosphere with weak large scale toroidal motion are unstable with respect to three-dimensional dust devil generation. (papers)

  3. Wave Generation Theory

    DEFF Research Database (Denmark)

    Frigaard, Peter; Høgedal, Michael; Christensen, Morten

    The intention of this manual is to provide some formulas and techniques which can be used for generating waves in hydraulic laboratories. Both long crested waves (2-D waves) and short crested waves (3-D waves) are considered.......The intention of this manual is to provide some formulas and techniques which can be used for generating waves in hydraulic laboratories. Both long crested waves (2-D waves) and short crested waves (3-D waves) are considered....

  4. Next generation initiation techniques

    Science.gov (United States)

    Warner, Tom; Derber, John; Zupanski, Milija; Cohn, Steve; Verlinde, Hans

    1993-01-01

    Four-dimensional data assimilation strategies can generally be classified as either current or next generation, depending upon whether they are used operationally or not. Current-generation data-assimilation techniques are those that are presently used routinely in operational-forecasting or research applications. They can be classified into the following categories: intermittent assimilation, Newtonian relaxation, and physical initialization. It should be noted that these techniques are the subject of continued research, and their improvement will parallel the development of next generation techniques described by the other speakers. Next generation assimilation techniques are those that are under development but are not yet used operationally. Most of these procedures are derived from control theory or variational methods and primarily represent continuous assimilation approaches, in which the data and model dynamics are 'fitted' to each other in an optimal way. Another 'next generation' category is the initialization of convective-scale models. Intermittent assimilation systems use an objective analysis to combine all observations within a time window that is centered on the analysis time. Continuous first-generation assimilation systems are usually based on the Newtonian-relaxation or 'nudging' techniques. Physical initialization procedures generally involve the use of standard or nonstandard data to force some physical process in the model during an assimilation period. Under the topic of next-generation assimilation techniques, variational approaches are currently being actively developed. Variational approaches seek to minimize a cost or penalty function which measures a model's fit to observations, background fields and other imposed constraints. Alternatively, the Kalman filter technique, which is also under investigation as a data assimilation procedure for numerical weather prediction, can yield acceptable initial conditions for mesoscale models. The

  5. Magnetohydrodynamic generation method

    International Nuclear Information System (INIS)

    Masai, Tadahisa; Ishibashi, Eiichi; Kojima, Akihiro.

    1967-01-01

    The present invention relates to a magneto-hydrodynamic generation method which increases the conductivity of active gas and the generated energy. In the conventional method of open-cycle magnetohydrodynamic generation, the working fluid does not possess a favorable electric conductivity since the collision cross section is large when the combustion is carried out in a condition of excess oxygen. Furthermore, combustion under a condition of oxygen shortage is uncapable of completely converting the generated energy. The air preheater or boiler is not sufficient to collect the waste gas resulting in damage and other economic disadvantages. In the present invention, the combustion gas caused by excess fuel in the combuster is supplied to the generator as the working gas, to which air or fully oxidized air is added to be reheated. While incomplete gas used for heat collection is not adequate, the unburned damage may be eliminated by combusting again and increasing the gas temperature and heat collection rate. Furthermore, a diffuser is mounted at the rear side of the generator to decrease the gas combustion rate. Thus, even when directly absorbing the preheated fully oxidized air or the ordinary air, the boiler is free from damage caused by combustion delay or impulsive force. (M. Ishida)

  6. Next generation PWR

    International Nuclear Information System (INIS)

    Tanaka, Toshihiko; Fukuda, Toshihiko; Usui, Shuji

    2001-01-01

    Development of LWR for power generation in Japan has been intended to upgrade its reliability, safety, operability, maintenance and economy as well as to increase its capacity in order, since nuclear power generation for commercial use was begun on 1970, to steadily increase its generation power. And, in Japan, ABWR (advanced BWR) of the most promising LWR in the world, was already used actually and APWR (advanced PWR) with the largest output in the world is also at a step of its actual use. And, development of the APWR in Japan was begun on 1980s, and is at a step of plan on construction of its first machine at early of this century. However, by large change of social affairs, economy of nuclear power generation is extremely required, to be positioned at an APWR improved development reactor promoted by collaboration of five PWR generation companies and the Mitsubishi Electric Co., Ltd. Therefore, on its development, investigation on effect of change in social affairs on nuclear power stations was at first carried out, to establish a design requirement for the next generation PWR. Here were described on outline, reactor core design, safety concept, and safety evaluation of APWR+ and development of an innovative PWR. (G.K.)

  7. The Gel Generator option

    International Nuclear Information System (INIS)

    Boyd, R.E.

    1999-01-01

    The development of a national policy for guaranteeing an ample supply of 99m Tc to nuclear medicine, involves issues which go beyond the means by which radioactivation is achieved. Indeed, in such an exercise the pragmatic dictates of business and the sensitivities of politics must also be taken into account. Furthermore where a preference towards the nuclear reactor or the potential of cyclotrons is being questioned, the debate is incomplete if the only options that are considered are the fission-based 99 Mo generator versus the direct cyclotron production of 99m Tc. There is a third option (also neutron γ-based), an alternative to the fission 99 Mo generator, which ought not be overlooked. The application of low specific activity (n,γ) 99 Mo to a new type of generator, the Gel Generator, has been the focus of much research, particularly in Australia and more recently in China. After the initial concept had been established in the laboratory, the Australian researchers then undertook a comprehensive program of tests on the Gel Generator to assess its potential, either in the clinical laboratory or the centralised radiopharmacy, for supplying 99m Tc suitable for nuclear medicine. The outcome of this program was a clear indication that the Gel Generator innovation had the capability to provide both technical and economic advantages to the nuclear medicine industry. These advantages are described. Since that time the Gel Generator has been selected for routine use in China where it now satisfies more than 30% of the 99m Tc demand. (author)

  8. Generation IV reactors: economics

    International Nuclear Information System (INIS)

    Dupraz, B.; Bertel, E.

    2003-01-01

    The operating nuclear reactors were built over a short period: no more than 10 years and today their average age rounds 18 years. EDF (French electricity company) plans to renew its reactor park over a far longer period : 30 years from 2020 to 2050. According to EDF this objective implies 3 constraints: 1) a service life of 50 to 60 years for a significant part of the present operating reactors, 2) to be ready to built a generation 3+ unit in 2020 which infers the third constraint: 3) to launch the construction of an EPR (European pressurized reactor) prototype as soon as possible in order to have it operating in 2010. In this scheme, generation 4 reactor will benefit the feedback experience of generation 3 and will take over in 2030. Economic analysis is an important tool that has been used by the generation 4 international forum to select the likely future reactor systems. This analysis is based on 4 independent criteria: the basic construction cost, the construction time, the operation and maintenance costs and the fuel cycle cost. This analysis leads to the evaluation of the global cost of electricity generation and of the total investment required for each of the reactor system. The former defines the economic competitiveness in a de-regulated energy market while the latter is linked to the financial risk taken by the investor. It appears, within the limits of the assumptions and models used, that generation 4 reactors will be characterized by a better competitiveness and an equivalent financial risk when compared with the previous generation. (A.C.)

  9. Fourth Generation Reactor Concepts

    International Nuclear Information System (INIS)

    Furtek, A.

    2008-01-01

    Concerns over energy resources availability, climate changes and energy supply security suggest an important role for nuclear energy in future energy supplies. So far nuclear energy evolved through three generations and is still evolving into new generation that is now being extensively studied. Nuclear Power Plants are producing 16% of the world's electricity. Today the world is moving towards hydrogen economy. Nuclear technologies can provide energy to dissociate water into oxygen and hydrogen and to production of synthetic fuel from coal gasification. The introduction of breeder reactors would turn nuclear energy from depletable energy supply into an unlimited supply. From the early beginnings of nuclear energy in the 1940s to the present, three generations of nuclear power reactors have been developed: First generation reactors: introduced during the period 1950-1970. Second generation: includes commercial power reactors built during 1970-1990 (PWR, BWR, Candu, Russian RBMK and VVER). Third generation: started being deployed in the 1990s and is composed of Advanced LWR (ALWR), Advanced BWR (ABWR) and Passive AP600 to be deployed in 2010-2030. Future advances of the nuclear technology designs can broaden opportunities for use of nuclear energy. The fourth generation reactors are expected to be deployed by 2030 in time to replace ageing reactors built in the 1970s and 1980s. The new reactors are to be designed with a view of the following objectives: economic competitiveness, enhanced safety, minimal radioactive waste production, proliferation resistance. The Generation IV International Forum (GIF) was established in January 2000 to investigate innovative nuclear energy system concepts. GIF members include Argentina, Brazil, Canada, Euratom, France Japan, South Africa, South Korea, Switzerland, United Kingdom and United States with the IAEA and OECD's NEA as permanent observers. China and Russia are expected to join the GIF initiative. The following six systems

  10. New Generator Technology

    Energy Technology Data Exchange (ETDEWEB)

    Nielsen, Roy S. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-02-17

    New generator technology project is driven by the need to be able to remotely deploy generator technology where it is needed, when it is needed. Both the military and aid programs that provide assistance after disasters could use the ability to deploy energy generation that fits the needs of the situation. Currently, pre-specified generators are deployed, sometime more than half way around the world to provide electricity. Through our Phase-I to Phase III DARPA grant, we will provide a mechanism where a 3d print station and raw materials could be shipped to a deployment site and remotely deployed personnel. These remote personnel can collaborate with engineers at a home location where 3d print plans can be optimized for the remote purpose. The plans can then be sent electronically to the remote location for printing, much like NASA sent the plans for a socket wrench to the International Space Station for printing in . If multiple generators need to be deployed at different remote locations, within miles of each other the printer rig can be moved to print the generators where they are needed. 3d printing is growing in the field of manufacturing. 3d printing has matured to the point where many types of materials are now available for many types of manufacturing. Both magnetic and electrically conductive material materials have recently been developed which can now lead to 3d printing of engines and generators. Our project will provide a successful printer rig that can be remotely deployed, to print a generator design in the field as well as provide a process for deploying the printed generator as well. This Systems Engineering Management Plan(SEMP) will provide the planning required for a Phase I DARPA grant that may also include goals for Phase II and Phase II grants. The SEMP provides a proposed project schedule, references, system engineering processes, specialty engineering system deployment and product support sections. Each section will state how our company

  11. Next-generation phylogenomics

    Directory of Open Access Journals (Sweden)

    Chan Cheong Xin

    2013-01-01

    Full Text Available Abstract Thanks to advances in next-generation technologies, genome sequences are now being generated at breadth (e.g. across environments and depth (thousands of closely related strains, individuals or samples unimaginable only a few years ago. Phylogenomics – the study of evolutionary relationships based on comparative analysis of genome-scale data – has so far been developed as industrial-scale molecular phylogenetics, proceeding in the two classical steps: multiple alignment of homologous sequences, followed by inference of a tree (or multiple trees. However, the algorithms typically employed for these steps scale poorly with number of sequences, such that for an increasing number of problems, high-quality phylogenomic analysis is (or soon will be computationally infeasible. Moreover, next-generation data are often incomplete and error-prone, and analysis may be further complicated by genome rearrangement, gene fusion and deletion, lateral genetic transfer, and transcript variation. Here we argue that next-generation data require next-generation phylogenomics, including so-called alignment-free approaches. Reviewers Reviewed by Mr Alexander Panchin (nominated by Dr Mikhail Gelfand, Dr Eugene Koonin and Prof Peter Gogarten. For the full reviews, please go to the Reviewers’ comments section.

  12. Magnetohydrodynamic power generation

    International Nuclear Information System (INIS)

    Sheindlin, A.E.; Jackson, W.D.; Brzozowski, W.S.; Rietjens, L.H.Th.

    1979-01-01

    The paper describes research and development in the field of magnetohydrodynamic power generation technology, based on discussions held in the Joint IAEA/UNESCO International Liaison Group on MHD electrical power generation. Research and development programmes on open cycle, closed cycle plasma and liquid-metal MHD are described. Open cycle MHD has now entered the engineering development stage. The paper reviews the results of cycle analyses and economic and environmental evaluations: substantial agreement has been reached on the expected overall performance and necessary component specifications. The achievement in the Soviet Union on the U-25 MHD pilot plant in obtaining full rated electrical power of 20.4 MW is described, as well as long duration testing of the integrated operation of MHD components. Work in the United States on coal-fired MHD generators has shown that, with slagging of the walls, a run time of about one hundred hours at the current density and electric field of a commercial MHD generator has been achieved. Progress obtained in closed cycle plasma and liquid metal MHD is reviewed. Electrical power densities of up to 140 MWe/m 3 and an enthalpy extraction as high as 24 per cent have been achieved in noble gas MHD generator experiments. (Auth.)

  13. MHD Generating system

    Science.gov (United States)

    Petrick, Michael; Pierson, Edward S.; Schreiner, Felix

    1980-01-01

    According to the present invention, coal combustion gas is the primary working fluid and copper or a copper alloy is the electrodynamic fluid in the MHD generator, thereby eliminating the heat exchangers between the combustor and the liquid-metal MHD working fluids, allowing the use of a conventional coalfired steam bottoming plant, and making the plant simpler, more efficient and cheaper. In operation, the gas and liquid are combined in a mixer and the resulting two-phase mixture enters the MHD generator. The MHD generator acts as a turbine and electric generator in one unit wherein the gas expands, drives the liquid across the magnetic field and thus generates electrical power. The gas and liquid are separated, and the available energy in the gas is recovered before the gas is exhausted to the atmosphere. Where the combustion gas contains sulfur, oxygen is bubbled through a side loop to remove sulfur therefrom as a concentrated stream of sulfur dioxide. The combustor is operated substoichiometrically to control the oxide level in the copper.

  14. Power generating device

    Energy Technology Data Exchange (ETDEWEB)

    Onodera, Toshihiro

    1989-05-02

    The existing power generating device consisting of static components only lacks effective measures to utilize solar energy and maintain power generation, hence it is inevitable to make the device much larger and more complicated in order to utilize it as the primary power source for artificial satellites. In view of the above, in order to offer a power generating device useful for the primary power source for satellites which is simple and can keep power generation by solar energy, this invention proposes a power generating device composed of the following elements: (1) a rectangular parallelopiped No. II superconductor plate; (2) a measure to apply a magnetic field to one face of the above superconductor plate; (3) a measure to provide a temperature difference within the range between the starting temperature and the critical temperature of superconductivity to a pair of faces meeting at right angles with the face to which the magnetic field was applied by the above measure; (4) a measure to provide an electrode on each of the other pair of faces meeting at right angles with the face to which the magnetic field was applied by the above measure and form a closed circuit by connecting the each electrode above to each of a pair of electrodes of the load respectively; and (5) a switching measure which is installed in the closed circuit prepared by the above measure and shuts off the closed circuit when the direction of the electric current running the above closed circuit is reversed. 6 figs.

  15. The Atlin Hydro Project : generation for generations

    Energy Technology Data Exchange (ETDEWEB)

    Simpson, S. [Atlin Tlingit Development Corp., Atlin, BC (Canada)

    2010-07-01

    This presentation documented the step-by-step process by which the Atlin Hydro Project was developed. The Taku River Tlingit First Nation undertook the Atlin project as part of its vision for responsible resource management, sustainable economic development, and cultural revival. The Atlin Community Energy Plan involved an assessment of electricity demand, a 20-year demand projection, energy efficiency recommendations, and an assessment of power supply options such as wind towers, connection to the Yukon power grid, and hydro. The potential impact on fisheries, hydrology, wildlife habitat, roads and bridges, navigable waters and forests, existing rights, and First Nation archaeology were assessed, along with other factors such as hazards and flood control. A hydrology assessment of the Surprise-Pine Drainage Basin was undertaken, and stream-flow measurements were taken near the intake location on Pine Creek. The project comprises a discharge control structure and a fish ladder; an intake and weir on Pine Creek; a penstock pipeline from intake to powerhouse; a powerhouse with a 2.1 MW Pelton turbine generator and a switch yard; and a power line from the powerhouse to the interconnection with the existing grid. The impacts on fisheries, wildlife, and human movement are expected to be minimal. 28 figs., 3 tabs.

  16. Third Generation Coaching

    DEFF Research Database (Denmark)

    Stelter, Reinhard

    2016-01-01

    German abstract: Auf der Grundlage aktueller Sozialforschung, neuer Lerntheorien und Diskurse der Personalführung entfaltet sich ein neues Verständnis von Coaching und Coaching-Psychologie. In der dritten Generation wird Coaching aus gesellschaftlicher Perspektive betrachtet. Wenn sich die...... Gesellschaft verändert, muss sich auch Coaching als spezifische Form der Interaktion weiterentwickeln: Die Mission des Third Generation Coaching ist die Entwicklung von Nachhaltigkeit in der Anwendung, indem sich der Dialog stärker auf Werte und Sinn-Schaffen ausrichtet, weg vom einengenden Zielfokus hin zur...... Betonung von Aspirationen, Leidenschaften und Werten. In diesem Sinne trägt Third Generation Coaching zur Entfaltung und Weiterentwicklung persönlicher Identität bei – ein entscheidender Faktor für die menschliche Entwicklung in unserer Zeit. Auf der Basis kollaborativer Zusammenarbeit dieses Ansatzes...

  17. Protocol Implementation Generator

    DEFF Research Database (Denmark)

    Carvalho Quaresma, Jose Nuno; Probst, Christian W.

    2010-01-01

    Users expect communication systems to guarantee, amongst others, privacy and integrity of their data. These can be ensured by using well-established protocols; the best protocol, however, is useless if not all parties involved in a communication have a correct implementation of the protocol and a...... Generator framework based on the LySatool and a translator from the LySa language into C or Java....... necessary tools. In this paper, we present the Protocol Implementation Generator (PiG), a framework that can be used to add protocol generation to protocol negotiation, or to easily share and implement new protocols throughout a network. PiG enables the sharing, verification, and translation...

  18. The Compton generator revisited

    Science.gov (United States)

    Siboni, S.

    2014-09-01

    The Compton generator, introduced in 1913 by the US physicist A H Compton as a relatively simple device to detect the Earth's rotation with respect to the distant stars, is analyzed and discussed in a general perspective. The paper introduces a generalized definition of the generator, emphasizing the special features of the original apparatus, and provides a suggestive interpretation of the way the device works. To this end, an intriguing electromagnetic analogy is developed, which turns out to be particularly useful in simplifying the calculations. Besides the more extensive description of the Compton generator in itself, the combined use of concepts and methods coming from different fields of physics, such as particle dynamics in moving references frames, continuum mechanics and electromagnetism, may be of interest to both teachers and graduate students.

  19. Liquid metal steam generator

    International Nuclear Information System (INIS)

    Wolowodiuk, W.

    1975-01-01

    A liquid metal heated steam generator is described which in the event of a tube failure quickly exhausts out of the steam generator the products of the reaction between the water and the liquid metal. The steam is generated in a plurality of bayonet tubes which are heated by liquid metal flowing over them between an inner cylinder and an outer cylinder. The inner cylinder extends above the level of liquid metal but below the main tube sheet. A central pipe extends down into the inner cylinder with a centrifugal separator between it and the inner cylinder at its lower end and an involute deflector plate above the separator so that the products of a reaction between the liquid metal and the water will be deflected downwardly by the deflector plate and through the separator so that the liquid metal will flow outwardly and away from the central pipe through which the steam and gaseous reaction products are exhausted. (U.S.)

  20. Grid generation methods

    CERN Document Server

    Liseikin, Vladimir D

    2010-01-01

    This book is an introduction to structured and unstructured grid methods in scientific computing, addressing graduate students, scientists as well as practitioners. Basic local and integral grid quality measures are formulated and new approaches to mesh generation are reviewed. In addition to the content of the successful first edition, a more detailed and practice oriented description of monitor metrics in Beltrami and diffusion equations is given for generating adaptive numerical grids. Also, new techniques developed by the author are presented, in particular a technique based on the inverted form of Beltrami’s partial differential equations with respect to control metrics. This technique allows the generation of adaptive grids for a wide variety of computational physics problems, including grid clustering to given function values and gradients, grid alignment with given vector fields, and combinations thereof. Applications of geometric methods to the analysis of numerical grid behavior as well as grid ge...

  1. The generation problem

    International Nuclear Information System (INIS)

    Ecker, G.

    1983-01-01

    Evidence for the generation structure of quarks and leptons is reviewed. The two main aspects of the generation problem are emphasized. The concept and possible problems of horizontal symmetries are discussed. Two different mechanisms for horizontal symmetries are considered leading to a generalized permutation symmetry in SU(2)sub(L) x u(1) in one case. The second mechanism uses the discrete unbroken subgroup of an axial U(1) with hypercolour anomalies in composite models. A concrete realization in the rishon model is investigated. The two different approaches produce almost identical quark mass matrices for three generations. In addition to a correct prediction for the Cabibbo angle the models yield a very small Kobayashi-Maskawa mixing angle Theta 3 and thus provide for a natural explanation of the smallness of CP violation. (Author)

  2. Automated drawing generation system

    International Nuclear Information System (INIS)

    Yoshinaga, Toshiaki; Kawahata, Junichi; Yoshida, Naoto; Ono, Satoru

    1991-01-01

    Since automated CAD drawing generation systems still require human intervention, improvements were focussed on an interactive processing section (data input and correcting operation) which necessitates a vast amount of work. As a result, human intervention was eliminated, the original objective of a computerized system. This is the first step taken towards complete automation. The effects of development and commercialization of the system are as described below. (1) The interactive processing time required for generating drawings was improved. It was determined that introduction of the CAD system has reduced the time required for generating drawings. (2) The difference in skills between workers preparing drawings has been eliminated and the quality of drawings has been made uniform. (3) The extent of knowledge and experience demanded of workers has been reduced. (author)

  3. Grid generation methods

    CERN Document Server

    Liseikin, Vladimir D

    2017-01-01

    This new edition provides a description of current developments relating to grid methods, grid codes, and their applications to actual problems. Grid generation methods are indispensable for the numerical solution of differential equations. Adaptive grid-mapping techniques, in particular, are the main focus and represent a promising tool to deal with systems with singularities. This 3rd edition includes three new chapters on numerical implementations (10), control of grid properties (11), and applications to mechanical, fluid, and plasma related problems (13). Also the other chapters have been updated including new topics, such as curvatures of discrete surfaces (3). Concise descriptions of hybrid mesh generation, drag and sweeping methods, parallel algorithms for mesh generation have been included too. This new edition addresses a broad range of readers: students, researchers, and practitioners in applied mathematics, mechanics, engineering, physics and other areas of applications.

  4. Generating ethnographic research questions

    DEFF Research Database (Denmark)

    Friberg, Torbjörn

    2015-01-01

    ? By drawing on the conceptual history of anthropology, the aim of this article is to generate ethnographic-oriented research questions concerned with higher education. The first part of the article provides an ethnographic background, while the second part focuses on Paul Willis's reasoning on ethnographic......As part of recent complex transformations, it seems that higher educational organisations are being forced to reorganise, standardise and streamline in order to survive in the new political and economic context. How are ethnographers in general going to approach these contemporary phenomena...... imagination, as a prerequisite for generating alternative research questions. The third part makes explicit anthropologist Maurice Godelier's theoretical imagination, carving out some specific theoretical parts which may be used in the generating process. The conclusion then suggests a number of questions...

  5. House of Generations

    DEFF Research Database (Denmark)

    Geert Jensen, Birgitte

    2017-01-01

    only the benefits of living close to the family. The Aarhus Municipality project "House of Generations" is a vision for creating a framework for relationships across all generations, for meaningful encounters and for rewarding neighbourliness. Three of Aarhus Municipality's magistrate departments...... participate in the project: Health and Care, Children and Youth, and Social Conditions and Employment. A public housing association that provides student dorms also participates in the project. The physical framework will be a building with a total area of approx. 25,000 m², located at Pier 4, at Aarhus......' harbour areas. The building will be a multi-generational house comprising a mixture of flexible public housing units for students, the elderly and residents who require care (elderly disabled people and people with acquired brain injuries). The building will be connected with common areas located in close...

  6. Spherical neutron generator

    Science.gov (United States)

    Leung, Ka-Ngo

    2006-11-21

    A spherical neutron generator is formed with a small spherical target and a spherical shell RF-driven plasma ion source surrounding the target. A deuterium (or deuterium and tritium) ion plasma is produced by RF excitation in the plasma ion source using an RF antenna. The plasma generation region is a spherical shell between an outer chamber and an inner extraction electrode. A spherical neutron generating target is at the center of the chamber and is biased negatively with respect to the extraction electrode which contains many holes. Ions passing through the holes in the extraction electrode are focused onto the target which produces neutrons by D-D or D-T reactions.

  7. Review of Micro Magnetic Generator

    OpenAIRE

    Lin DU; Gengchen SHI; Jingjing ZHAO

    2014-01-01

    This paper discusses the research progress of micro magnetic generator systems. Micro magnetic generator systems convert energy from the environment to electric energy with advantages as high reliability, high power density, long life time and can be applied to extreme environment. This paper summarizes methods for improving generator performance of micro magnetic generator, including rotational magnetic generator, vibrational magnetic generator and hybrid magnetic generator, analyzes and com...

  8. Programmable pulse generator

    International Nuclear Information System (INIS)

    Xue Zhihua; Lou Binqiao; Duan Xiaohui

    2002-01-01

    The author introduces the design of programmable pulse generator that is based on a micro-controller and controlled by RS232 interface of personal computer. The whole system has good stability. The pulse generator can produce TTL pulse and analog pulse. The pulse frequency can be selected by EPLD. The voltage amplitude and pulse width of analog pulse can be adjusted by analog switches and digitally-controlled potentiometers. The software development tools of computer is National Instruments LabView5.1. The front panel of this virtual instrumentation is intuitive and easy-to-use. Parameters can be selected and changed conveniently by knob and slide

  9. Hacking the next generation

    CERN Document Server

    Dhanjani, Nitesh; Hardin, Brett

    2009-01-01

    With the advent of rich Internet applications, the explosion of social media, and the increased use of powerful cloud computing infrastructures, a new generation of attackers has added cunning new techniques to its arsenal. For anyone involved in defending an application or a network of systems, Hacking: The Next Generation is one of the few books to identify a variety of emerging attack vectors. You'll not only find valuable information on new hacks that attempt to exploit technical flaws, you'll also learn how attackers take advantage of individuals via social networking sites, and abuse

  10. Seismic wave generator

    International Nuclear Information System (INIS)

    Devaure, Bernard.

    1982-01-01

    This invention concerns a device for simulating earth tremors. This device includes a seismic wave generator formed of a cylinder, one end of which is closed by one of the walls of a cell containing a soil, the other end being closed by a wall on which are fixed pyrotechnic devices generating shock waves inside the cylinder. These waves are transmitted from the cylinder to the cell through openings made in the cell wall. This device also includes a mechanical device acting as low-pass filter, located inside the cylinder and close to the cell wall [fr

  11. Intracavity vortex beam generation

    Science.gov (United States)

    Naidoo, Darryl; Aït-Ameur, Kamel; Forbes, Andrew

    2011-10-01

    In this paper we explore vortex beams and in particular the generation of single LG0l modes and superpositions thereof. Vortex beams carry orbital angular momentum (OAM) and this intrinsic property makes them prevalent in transferring this OAM to matter and to be used in quantum information processing. We explore an extra-cavity and intra-cavity approach in LG0l mode generation respectively. The outputs of a Porro-prism resonator are represented by "petals" and we show that through a full modal decomposition, the "petal" fields are a superposition of two LG0l modes.

  12. Electricity Generation Baseline Report

    Energy Technology Data Exchange (ETDEWEB)

    Logan, Jeffrey [National Renewable Energy Lab. (NREL), Golden, CO (United States); Marcy, Cara [National Renewable Energy Lab. (NREL), Golden, CO (United States); McCall, James [National Renewable Energy Lab. (NREL), Golden, CO (United States); Flores-Espino, Francisco [National Renewable Energy Lab. (NREL), Golden, CO (United States); Bloom, Aaron [National Renewable Energy Lab. (NREL), Golden, CO (United States); Aabakken, Jorn [National Renewable Energy Lab. (NREL), Golden, CO (United States); Cole, Wesley [National Renewable Energy Lab. (NREL), Golden, CO (United States); Jenkin, Thomas [National Renewable Energy Lab. (NREL), Golden, CO (United States); Porro, Gian [National Renewable Energy Lab. (NREL), Golden, CO (United States); Liu, Chang [National Renewable Energy Lab. (NREL), Golden, CO (United States); Ganda, Francesco [Argonne National Lab. (ANL), Argonne, IL (United States); Boardman, Richard [Idaho National Lab. (INL), Idaho Falls, ID (United States); Tarka, Thomas [National Energy Technology Lab. (NETL), Albany, OR (United States); Brewer, John [National Energy Technology Lab. (NETL), Albany, OR (United States); Schultz, Travis [National Energy Technology Lab. (NETL), Albany, OR (United States)

    2017-01-01

    This report was developed by a team of national laboratory analysts over the period October 2015 to May 2016 and is part of a series of studies that provide background material to inform development of the second installment of the Quadrennial Energy Review (QER 1.2). The report focuses specifically on U.S. power sector generation. The report limits itself to the generation sector and does not address in detail parallel issues in electricity end use, transmission and distribution, markets and policy design, and other important segments. The report lists 15 key findings about energy system needs of the future.

  13. Electric power generator

    International Nuclear Information System (INIS)

    Carney, H.C.

    1977-01-01

    An electric power generator of the type employing a nuclear heat source and a thermoelectric converter is described wherein a transparent thermal insulating medium is provided inside an encapsulating enclosure to thermally insulate the heat source and thermoelectric generator. The heat source, the thermoelectric converter, and the enclosure are provided with facing surfaces which are heat-reflective to a substantial degree to inhibit radiation of heat through the medium of the encapsulating enclosure. Multiple reflective foils may be spaced within the medium as necessary to inhibit natural convection of heat and/or further inhibit radiation

  14. Wind electric power generation

    International Nuclear Information System (INIS)

    Groening, B.; Koch, M.; Canter, B.; Moeller, T.

    1995-01-01

    The monthly statistics of wind electric power generation in Denmark are compiled from information given by the owners of private wind turbines. For each wind turbine the name of the site and of the type of turbine is given, and the power generation data are given for the month in question together with the total production in 1988 and 1989. Also the data of operation start are given. On the map of Denmark the sites of the wind turbines are marked. The statistics for December 1994 comprise 2328 wind turbines

  15. Radioactive material generator

    International Nuclear Information System (INIS)

    Czaplinski, T.V.; Bolter, B.J.; Heyer, R.E.; Bruno, G.A.

    1975-01-01

    A radioactive material generator includes radioactive material in a column, which column is connected to inlet and outlet conduits, the generator being embedded in a lead casing. The inlet and outlet conduits extend through the casing and are topped by pierceable closure caps. A fitting, containing means to connect an eluent supply and an eluate container, is adapted to pierce the closure caps. The lead casing and the fitting are compatibly contoured such that they will fit only if properly aligned with respect to each other

  16. The generation game

    OpenAIRE

    Chatrakul Na Ayudhya, Uracha

    2015-01-01

    Purpose – Explores the limited value of concepts such as Baby-Boomer, Generation X and Generation Y and advances the view that life course is more valuable.\\ud \\ud Design/methodology/approach – Examines how young adults in Britain, born between 1975 and 1982, conceptualized the notion of work-life balance as they were about to leave university and enter full-time paid employment. \\ud \\ud Findings – Reveals that the notion of individual choice strongly underpins young adults’ conceptualization...

  17. ColloInputGenerator

    DEFF Research Database (Denmark)

    2013-01-01

    This is a very simple program to help you put together input files for use in Gries' (2007) R-based collostruction analysis program. It basically puts together a text file with a frequency list of lexemes in the construction and inserts a column where you can add the corpus frequencies. It requires...... it as input for basic collexeme collostructional analysis (Stefanowitsch & Gries 2003) in Gries' (2007) program. ColloInputGenerator is, in its current state, based on programming commands introduced in Gries (2009). Projected updates: Generation of complete work-ready frequency lists....

  18. Generator for ionizing radiation

    International Nuclear Information System (INIS)

    Romanovskij, V.F.; Panasjuk, V.S.; Stepanov, B.M.; Ovtscharov, A.M.; Akimov, J.A.

    1979-01-01

    The X-ray, electron, or neutron generator contains a radiation source with an accelerating tube, whose shell encloses a resonance transformer, a subdivided tube insulator and a high-tension electrode for the accelerating tube. The accelerating tube can be evacuated. The high-tension winding of the resonance transformer lies within the tube insulator of the accelerating tube and the evacuated space between resonance transformer and tube insulator. The generator may be applied in medicine, in geophysical research or for activation analysis of materials. (DG) 891 HP/DG 892 BRE [de

  19. Hera presentation generator (Poster)

    NARCIS (Netherlands)

    Frasincar, F.; Houben, G.J.P.M.; Barna, P.; Ellis, A.; Hagino, T.

    2005-01-01

    Semantic Web Information Systems (SWIS) are Web Information Systems that use Semantic Web technologies. Hera is a model-driven design methodology for SWIS. In Hera, models are represented in RDFS and model instances in RDF. The Hera Presentation Generator (HPG) is an integrated development

  20. Tredje generations coaching

    DEFF Research Database (Denmark)

    Stelter, Reinhard

    2012-01-01

    ”Tredje generations coaching” udfolder et nyt univers for coaching og coachingpsykologi gennem en bearbejdelse af aktuel samfundsforskning, nye læringsteorier og diskurser om det personlige lederskab. ”Tredje generations coaching” er funderet på en samfundsmæssig forståelse af coaching. Coaching er...... blevet så betydningsfuld, fordi samfundet opleves som uoverskueligt og hyperkomplekst. Viden skal nu udformes og anvendes i specifikke kontekster og situationer, og både i privatliv og i det offentlige rum skal vi lære at forhandle os til rette. Coaching kan hjælpe os til at skabe ny viden og mestre...... sociale forhandlinger. Coaching er dermed en slags fødselshjælp til nye refleksioner og perspektiver, en hjælp til selvhjælp og en støtte til ens egen selvdannelsesproces. ”Tredje generations coaching” fremhæver coach og coachee i deres narrativ-samskabende partnerskab. Til forskel fra første generations...

  1. CONFIGURATION GENERATOR MODEL

    International Nuclear Information System (INIS)

    Alsaed, A.

    2004-01-01

    ''The Disposal Criticality Analysis Methodology Topical Report'' prescribes an approach to the methodology for performing postclosure criticality analyses within the monitored geologic repository at Yucca Mountain, Nevada. An essential component of the methodology is the ''Configuration Generator Model for In-Package Criticality'' that provides a tool to evaluate the probabilities of degraded configurations achieving a critical state. The configuration generator model is a risk-informed, performance-based process for evaluating the criticality potential of degraded configurations in the monitored geologic repository. The method uses event tree methods to define configuration classes derived from criticality scenarios and to identify configuration class characteristics (parameters, ranges, etc.). The probabilities of achieving the various configuration classes are derived in part from probability density functions for degradation parameters. The NRC has issued ''Safety Evaluation Report for Disposal Criticality Analysis Methodology Topical Report, Revision 0''. That report contained 28 open items that required resolution through additional documentation. Of the 28 open items, numbers 5, 6, 9, 10, 18, and 19 were concerned with a previously proposed software approach to the configuration generator methodology and, in particular, the k eff regression analysis associated with the methodology. However, the use of a k eff regression analysis is not part of the current configuration generator methodology and, thus, the referenced open items are no longer considered applicable and will not be further addressed

  2. Nuclear power generation

    International Nuclear Information System (INIS)

    Hirao, Katumi; Sato, Akira; Kaimori, Kimihiro; Kumano, Tetsuji

    2001-01-01

    Nuclear power generation for commercial use in Japan has passed 35 years since beginning of operation in the Tokai Nuclear Power Station in 1966, and has 51 machines of reactor and about 44.92 MW of total output of equipment scale in the 21st century. However, an environment around nuclear energy becomes severer at present, and then so many subjects to be overcome are remained such as increased unreliability of the public on nuclear energy at a chance of critical accident of the JCO uranium processing facility, delay of pull-thermal plan, requirement for power generation cost down against liberalization of electric power, highly aging countermeasure of power plant begun its operation as its Genesis, and so on. Under such conditions, in order that nuclear power generation in Japan survives as one of basic electric source in future, it is necessary not only to pursue safety and reliability of the plant reliable to the public, but also to intend to upgrade its operation and maintenance by positively adopting good examples on operational management method on abroad and to endeavor further upgrading of application ratio of equipments and reduction of generation cost. Here were outlined on operation conditions of nuclear power stations in Japan, and introduced on upgrading of their operational management and maintenance management. (G.K.)

  3. Large hydropower generating units

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-07-01

    This document presents the Brazilian experience with the design, fabrication, construction, commissioning and operation of large scale and generation capacity unities. The experience had been acquired with the implementation of Itumbiara, Paulo Afonso IV, Tucurui, Itaipu and Xingo power plants, which are among the largest world unities.

  4. Generating a scalar logic

    DEFF Research Database (Denmark)

    Ramsgaard Thomsen, Mette; Tamke, Martin

    2011-01-01

    This paper presents the design project "it's a SMALL world", an exhibition design developed for the Danish Design Centre in 2009. The project investigates the making of a generative design environment by which multiple design parameters as from program, site or the subsequent digital fabrication ...

  5. Dynamical generation of flavour

    Indian Academy of Sciences (India)

    Introduction of family symmetry and generation of flavour structure by Yukawa couplings arising as vacuum expectation values (VEVs) of 'spurion' fields offers an attractive alternative prospect for understanding flavour structure [1]. Model builders have considered various. Pramana – J. Phys., Vol. 86, No. 2, February 2016.

  6. Next Generation Inverter

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Zilai [General Motors LLC, Detroit, MI (United States); Gough, Charles [General Motors LLC, Detroit, MI (United States)

    2016-04-22

    The goal of this Cooperative Agreement was the development of a Next Generation Inverter for General Motors’ electrified vehicles, including battery electric vehicles, range extended electric vehicles, plug-in hybrid electric vehicles and hybrid electric vehicles. The inverter is a critical electronics component that converts battery power (DC) to and from the electric power for the motor (AC).

  7. Risks of power generation

    International Nuclear Information System (INIS)

    Mostert, P.

    1981-01-01

    A comparison is made between the various ways of power generation in the Netherlands and the hazards attached to them. Tables are presented of fuels used, the quantities used per annum and in the course of the last 20 years, accidents and pollution types and percentages, as well as the toxicity and waste disposal risks. (Auth.)

  8. Next generation of accelerators

    International Nuclear Information System (INIS)

    Richter, B.

    1979-01-01

    Existing high-energy accelerators are reviewed, along with those under construction or being designed. Finally, some of the physics issues which go into setting machine parameters, and some of the features of the design of next generation electron and proton machines are discussed

  9. Leading Generation Y

    Science.gov (United States)

    Coley, David C.

    2009-01-01

    School administrators are facing the perfect storm: a growing number of baby boomers retiring each year, an absence of experienced teachers to take their place, and high turnover among young teachers. The need to hire and retain a new generation of teachers is one of the biggest challenges facing school administrators. To fill these vacancies,…

  10. Loser Generated Content

    DEFF Research Database (Denmark)

    Petersen, Søren Mørk

    2008-01-01

    In this article [ 1 ] some of the critical aspects of Web 2.0 are mapped in relation to labor and the production of user generated content. For many years the Internet was considered an apt technology for subversion of capitalism by the Italian post–Marxists. What we have witnessed, however...

  11. Dynalight Next Generation

    DEFF Research Database (Denmark)

    Jørgensen, Bo Nørregaard; Ottosen, Carl-Otto; Dam-Hansen, Carsten

    2016-01-01

    The project aims to develop the next generation of energy cost-efficient artificial lighting control that enables greenhouse growers to adapt their use of artificial lighting dynamically to fluctuations in the price of electricity. This is a necessity as fluctuations in the price of electricity c...

  12. Next Generation Social Networks

    DEFF Research Database (Denmark)

    Sørensen, Lene Tolstrup; Skouby, Knud Erik

    2008-01-01

    different online networks for communities of people who share interests or individuals who presents themselves through user produced content is what makes up the social networking of today. The purpose of this paper is to discuss perceived user requirements to the next generation social networks. The paper...

  13. Point Lepreau generating station

    International Nuclear Information System (INIS)

    Ganong, G.H.D.; Strang, A.E.; Gunter, G.E.; Thompson, T.S.

    Point Lepreau-1 reactor is a 600 MWe generating station expected to be in service by October 1979. New Brunswick is suffering a 'catch up' phenomenon in load growth and needs to decrease dependence on foreign oil. The site is on salt water and extensive study has gone into corrosion control. Project management, financing and scheduling have unique aspects. (E.C.B.)

  14. Aircraft Oxygen Generation

    Science.gov (United States)

    2012-02-01

    An Oxygen Enriched Air System for the AV-8A Harrier (NADC-81198-60).” 70 Horch , T., et. al. “The F-16 Onboard Oxygen Generating System: Performance...Only and Safety Privileged). Horch , T., Miller, R., Bomar, J., Tedor, J., Holden, R., Ikels, K., & Lozano, P. (1983). The F-16 Onboard Oxygen

  15. Variable speed generators

    CERN Document Server

    Boldea, Ion

    2005-01-01

    With the deregulation of electrical energy production and distribution, says Boldea (Polytechnical Institute, Timisoara, Romania) producers are looking for ways to tailor their electricity for different markets. Variable-speed electric generators are serving that purpose, up to the 400 megavolt ampere unit size, in Japan since 1996 and Germany sinc

  16. Image scaling curve generation

    NARCIS (Netherlands)

    2012-01-01

    The present invention relates to a method of generating an image scaling curve, where local saliency is detected in a received image. The detected local saliency is then accumulated in the first direction. A final scaling curve is derived from the detected local saliency and the image is then

  17. Image scaling curve generation.

    NARCIS (Netherlands)

    2011-01-01

    The present invention relates to a method of generating an image scaling curve, where local saliency is detected in a received image. The detected local saliency is then accumulated in the first direction. A final scaling curve is derived from the detected local saliency and the image is then

  18. MEMS Solar Generators

    OpenAIRE

    Grbovic, Dragoslav; Osswald, Sebastian

    2011-01-01

    Approved for public release; distribution is unlimited Using MEMS bimaterial structures to build highly efficient solar energy generators. This is a novel approach that utilizes developments in the area of bimaterial sensors and applies them in the field of solar energy harvesting.

  19. Pulsed neutron generator

    International Nuclear Information System (INIS)

    Bespalov, D.F.; Bykovskii, Yu.A.; Vergun, I.I.; Kozlovskii, K.I.; Kozyrev, Yu.P.; Leonov, R.K.; Simagin, B.I.; Tsybin, A.S.; Shikanov, A.Ie.

    1986-03-01

    The paper describes a new device for generating pulsed neutron fields, utilized in nuclear geophysics for carrying out pulsed neutron logging and activation analysis under field conditions. The invention employs a sealed-off neutron tube with a laser ion source which increases neutron yield to the level of 10 neutrons per second or higher. 2 refs., 1 fig

  20. Steam generators and furnaces

    Energy Technology Data Exchange (ETDEWEB)

    Swoboda, E

    1978-04-01

    The documents published in 1977 in the field of steam generators for conventional thermal power plants are classified according to the following subjects: power industry and number of power plants, planning and operation, design and construction, furnaces, environmental effects, dirt accumulation and corrosion, conservation and scouring, control and automation, fundamental research, and materials.

  1. Future generations in democracy

    DEFF Research Database (Denmark)

    Jensen, Karsten Klint

    2015-01-01

    of future generations. The analysis reveals that they tend to overlook the democratic costs of such representation (violation of political equality, risk of distortion of the deliberation and undermining of autonomy), while they seem to ignore the alternative of giving consideration to the interests...

  2. Energy generation device

    International Nuclear Information System (INIS)

    Araki, Takashi; Tatsumi, Masami; Tada, Koji.

    1990-01-01

    In a reaction estimated as nuclear fusion, a portion near of electrode is heated locally to a high temperature by the heat of the reaction generated on the electrode, by which the electrode is melted or heavy water is boiled. Then, Continuous reaction is difficult and not practical. In view of the above, a cathode made of deuterium absorbing materials is put into heavy water and electric current is supplied, to continuously take place the reaction and an anode is disposed in a cylindrical cathode to cause reaction of energy generation therein in order to continuously take out the generated energy to the outside safely. Further, heavy water is circulated inside the cylindrical cathode to externally take out heavy water the temperature of which is elevated by the generated energy, and fresh heavy water is supplied to the inside of the cylindrical cathode. Thus, heavy water does not boil on the electrode, temperature elevation can be suppressed and melting of the electrode itself can be prevented. (N.H.)

  3. Mentorship: A Generational Perspective

    Science.gov (United States)

    Shadle, Eric

    2016-01-01

    Three major generations are represented in today's workforce: Baby Boomers, Gen X, and Millennials. Each of these groups has a wide range of definitions, but here they are defined according to their most common definitions: Baby boomers include those born in the decade following the end of World War II and are between the ages of 50 and 70 years.…

  4. High Voltage Seismic Generator

    Science.gov (United States)

    Bogacz, Adrian; Pala, Damian; Knafel, Marcin

    2015-04-01

    This contribution describes the preliminary result of annual cooperation of three student research groups from AGH UST in Krakow, Poland. The aim of this cooperation was to develop and construct a high voltage seismic wave generator. Constructed device uses a high-energy electrical discharge to generate seismic wave in ground. This type of device can be applied in several different methods of seismic measurement, but because of its limited power it is mainly dedicated for engineering geophysics. The source operates on a basic physical principles. The energy is stored in capacitor bank, which is charged by two stage low to high voltage converter. Stored energy is then released in very short time through high voltage thyristor in spark gap. The whole appliance is powered from li-ion battery and controlled by ATmega microcontroller. It is possible to construct larger and more powerful device. In this contribution the structure of device with technical specifications is resented. As a part of the investigation the prototype was built and series of experiments conducted. System parameter was measured, on this basis specification of elements for the final device were chosen. First stage of the project was successful. It was possible to efficiently generate seismic waves with constructed device. Then the field test was conducted. Spark gap wasplaced in shallowborehole(0.5 m) filled with salt water. Geophones were placed on the ground in straight line. The comparison of signal registered with hammer source and sparker source was made. The results of the test measurements are presented and discussed. Analysis of the collected data shows that characteristic of generated seismic signal is very promising, thus confirms possibility of practical application of the new high voltage generator. The biggest advantage of presented device after signal characteristics is its size which is 0.5 x 0.25 x 0.2 m and weight approximately 7 kg. This features with small li-ion battery makes

  5. Improvements in SISCOM II Technology; Introduccion de Mejoras Tecnologicas en el SISCOM II

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-31

    This document is the Final Report for the project. Improvements in SISCOM II Technology. It consists of a brief description of the activities carried out during the project, and several Annexes that explain in a deeper way each result. SISCOM II is the main telemetry system currently in use in the Spanish underground coal mining, but it was developed ten years ago and needed a technological update, which was the objective of this project. The aims of the project were: - To develop Hardware and Software for the Outstations currently used (maintenance developments) - To design new hardware and software, easier to use in the current and new applications of SISCOM II Both objectives were met, although not in the way originally intended. The main results were: In the field of old Outstations update: - A new set of boards for the old Outstations was developed - Outstations`s firmware was updated for the new hardware In the field new hardware and software design: - SISCOM II Supervision software was completely rewritten, and now runs under Windows 3.11/Windows 95 (Originally it ran under DOS) - A new hardware configuration (the RELIA 2000), easier to assembly, install and re configure, together with its firmware, was developed Generally speaking the activities were carried out accordingly to the original schedule, with one exception, due to changes in the market of this type of Systems. Because of the changes, which happened by the end of the project`s time span, the structure of the new hardware was somehow different to the original design, although its functionality and performance is similar or even better than those of the original one. (Author)

  6. Trajectorias tecnologicas existentes y emergentes hacia 2020 : Una panoramica de la industria automotriz global

    NARCIS (Netherlands)

    Vallejo, B.; Martinez Martinez, Adriana; Jorge, Carrillo Viveros

    2017-01-01

    En este libro, coordinado por Adriana Martínez y Jorge Carrillo, se presentan nueve capítulos en los que diversos especialistas analizan las transformaciones recientes de la industria automotriz desde una perspectiva regional, pero que obedece a los cambios y tendencias internacionales. Dichas

  7. Progress report on scientific and technological activities: 1995; Informe de actividades cientificas y tecnologicas: 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    An overview of research and development activities of the Constituyentes Atomic Center, National Atomic Energy Commission (Argentine), during the period January-December 1995 is presented. The research and development activities are reported under the following headings: Fuel Elements; Non Destructive and Structural Test; Physics; Materials; Chemistry; Radiobiology Nuclear Reactors; Institute of Technology; Quality Management; Technical Assistance to Industry (SATI); Computer and Communication Services Center; Nuclear Power Stations Support Group. List of publications by the scientific staff of the Atomic Center is provided. The list includes paper published in journals, papers presented in conferences, symposia, etc., and technical reports.

  8. Progress report on scientific and technological activities: 1996; Informe de actividades cientificas y tecnologicas: 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-01

    An overview of research and development activities of the Constituyentes Atomic Center, National Atomic Energy Commission (Argentine), during the period January-December 1996 is presented. The research and development activities are reported under the following headings: Fuel Elements; Non Destructive and Structural Test; Physics; Materials; Chemistry; Radiobiology Nuclear Reactors; Institute of Technology; Quality Management; Technical Assistance to Industry (SATI); Computer and Communication Services Center; Nuclear Power Stations Support Group. List of publications by the scientific staff of the Atomic Center is provided. The list includes paper published in journals, papers presented in conferences, symposia, etc., and technical reports.

  9. The develop of technology production in Spain; El impulso de la produccion tecnologica en Espana

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez Labastida, J. M.

    2007-07-01

    Spanish Science and Technology system has been very effective in scientific production but not in technology transfer to economic activities. A cultural change is needed to improve the knowledge transfer mechanisms. Some specific actions are proposed in order to develop useful instruments to achieve a better technology transfer system. (Author)

  10. INNOVACION TECNOLOGICA Y COMERCIAL DE PRODUCTOS FORESTALES NO MADEREROS (PFNM) EN CHILE.

    OpenAIRE

    VALDEBENITO R., GERARDO

    2013-01-01

    Los Productos Forestales No Madereros (PFNM) son definidos por FAO como "bienes de origen biológico distinto de la madera, procedentes de los bosques, de otros terrenos arbolados y de árboles situados fuera de los bosques". Chile posee una gran cantidad de PFNM, los cuales han sido utilizados históricamente por nuestra población, destacando las especies que poseen propiedades medicinales, frutos silvestres y alimentos, entre otros bienes. Este rubro económico, a pesar de presentar bajos ni...

  11. Technological research in coal mining. La investigacion tecnologica en la mineria del carbon

    Energy Technology Data Exchange (ETDEWEB)

    Caride Linan, C. (OCICARBON, Madrid (Spain))

    1990-09-01

    Ocicarbon was formed in 1985 as a consequence of the resolutions, adopted by Congress when the then current National Energy Plan was approved. The aim of this non-profit making private organisation which is made up of national coal producers is to manage, promote and finance technological research and development of interest to both coal producers and customers. 2 figs.

  12. New technologies on eggs manufacturing; Innovazione tecnologica nell`industria di lavorazione delle uova

    Energy Technology Data Exchange (ETDEWEB)

    Pizzichini, M.; Serse, A. [ENEA, Centro Ricerche Casaccia, Rome (Italy). Dip. Innovazione; Marcolini, P.; Erbisti, P. [Soc. Coop. Avicola Lessinia, Pigozzo, Verona (Italy)

    1996-10-01

    Objective of this paper is innovate the industrial manufacturing process, up grading the white egg commercial value according the following points: - improve the albumen rheological properties (whippability); - concentrate the white eggs without damaging the protein functional properties; - fractionate eggs white proteins to improve the useful application range in the pharmaceutical industry. The albumen chemical-physical properties and the protein separation technologies, based mainly on membrane techniques, are discussed. This paper represents a first technical overview on eggs manufacturing, carried out by ENEA (Italian Agency for New Technologies, Energy and the Environment) and the Avicola Lessinia, with the objective to develop a new production process.

  13. Innovazione tecnologica e sinergie tra soluzioni geospaziali Lo "scenario Intergraph" (Parte Seconda

    Directory of Open Access Journals (Sweden)

    Andrea Fiduccia

    2012-09-01

    Full Text Available Continua in quest'articolo la descrizione delle soluzioni geospatial del nuovo scenario Intergraph che si sta delineando a seguito della fusione di molti player del settore della geomatica al'interno del gruppo Hexagon AB. La prima parte di questo articolo è stata pubblicata su GEOmedia 4/2011.Technological  innovation  and  synergies  between  geospatial solutions. The "Intergraph's scenario". 2nd Part.In  October  2010,  Intergraph  was  acquired  by  and  is  now  a wholly owned subsidiary of Hexagon AB. Hexagon is a lead-ing global provider of precision measurement technology sys-tems. Intergraph Security, Government & Infrastructure (SG&I provides geospatially powered solutions to the public safety and  security,  defense  and  intelligence,  government,  trans-portation, utilities, and communications industries. Now since ERDAS is part of Intergraph,  Intergraph provides integrated products for remote sensing, photogrammetry, and geospatial data management and delivery. Using Leica sensors and tech-nologies enhanced by Intergraph-ERDAS software technolo-gies, IMoSS (another company of HEXAGON AB is a reliable partner  when  it  is  needed  to  monitor,  analyse  and  visualise movements  at  millimetre  level  accuracy  and  to  trasform  the monitoring data into actionable intelligence.

  14. Innovazione tecnologica e sinergie tra soluzioni geospaziali Lo "scenario Intergraph" (Parte Seconda

    Directory of Open Access Journals (Sweden)

    Andrea Fiduccia

    2012-09-01

    Full Text Available Continua in quest'articolo la descrizione delle soluzioni geospatial del nuovo scenario Intergraph che si sta delineando a seguito della fusione di molti player del settore della geomatica al'interno del gruppo Hexagon AB. La prima parte di questo articolo è stata pubblicata su GEOmedia 4/2011. Technological  innovation  and  synergies  between  geospatial solutions. The "Intergraph's scenario". 2nd Part. In  October  2010,  Intergraph  was  acquired  by  and  is  now  a wholly owned subsidiary of Hexagon AB. Hexagon is a lead-ing global provider of precision measurement technology sys-tems. Intergraph Security, Government & Infrastructure (SG&I provides geospatially powered solutions to the public safety and  security,  defense  and  intelligence,  government,  trans-portation, utilities, and communications industries. Now since ERDAS is part of Intergraph,  Intergraph provides integrated products for remote sensing, photogrammetry, and geospatial data management and delivery. Using Leica sensors and tech-nologies enhanced by Intergraph-ERDAS software technolo-gies, IMoSS (another company of HEXAGON AB is a reliable partner  when  it  is  needed  to  monitor,  analyse  and  visualise movements  at  millimetre  level  accuracy  and  to  trasform  the monitoring data into actionable intelligence.

  15. Geoplat-Spanish Geothermal technology platform-; Geoplat-Plataforma Tecnologica Espanola de Geotermia-

    Energy Technology Data Exchange (ETDEWEB)

    Gregorio, M. de

    2009-07-01

    It was recently created the Spanish Geothermal Technology Platform-GEOPLAT- to provide a framework within, all sectors involved in the development of geothermal energy, leading the industry, work together in a coordinated way to ensure the commercial settlement of this renewable energy and its continuous growth, in a competitive and sustainable form. Its main objectives and structure are briefly described in the paper. (Author)

  16. Improvements in SISCOM II Technology; Introduccion de Mejoras Tecnologicas en el SISCOM II

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-12-31

    This document is the Final Report for the project. Improvements in SISCOM II Technology. It consists of a brief description of the activities carried out during the project, and several Annexes that explain in a deeper way each result. SISCOM II is the main telemetry system currently in use in the Spanish underground coal mining, but it was developed ten years ago and needed a technological update, which was the objective of this project. The aims of the project were: - To develop Hardware and Software for the Outstations currently used (maintenance developments) - To design new hardware and software, easier to use in the current and new applications of SISCOM II Both objectives were met, although not in the way originally intended. The main results were: In the field of old Outstations update: - A new set of boards for the old Outstations was developed - Outstations`s firmware was updated for the new hardware In the field new hardware and software design: - SISCOM II Supervision software was completely rewritten, and now runs under Windows 3.11/Windows 95 (Originally it ran under DOS) - A new hardware configuration (the RELIA 2000), easier to assembly, install and re configure, together with its firmware, was developed Generally speaking the activities were carried out accordingly to the original schedule, with one exception, due to changes in the market of this type of Systems. Because of the changes, which happened by the end of the project`s time span, the structure of the new hardware was somehow different to the original design, although its functionality and performance is similar or even better than those of the original one. (Author)

  17. Technology monitoring in the CIEMAT; La vigilancia tecnologica en el CIEMAT

    Energy Technology Data Exchange (ETDEWEB)

    Perez-Martinez, M.; Cuesta, M. J.; Crespi, S. N.; Cabrera, J. A.

    2008-07-01

    The CIEMAT Foresight and Technology Monitoring Unit focuses its activities on obtaining strategic information on future developments in the area of energy and environment that can be used for decision making by the centers management. In addition, it provides services to CIEMAT researchers and other external customers. In May 2007, the Asociacion Espanola de Normalizacion y Certificacion AENOR delivered to the CIEMAT the first Technology Monitoring System certificate granted in Spain as per standard UNE 166006:2006. This article describes the Units experience in the implementation process of the Technology Monitoring System and provides several examples of the way in which the Unit graphically represents the information analyzed in its Technology Monitoring Reports. (Author)

  18. GASIFICATION FOR DISTRIBUTED GENERATION

    Energy Technology Data Exchange (ETDEWEB)

    Ronald C. Timpe; Michael D. Mann; Darren D. Schmidt

    2000-05-01

    A recent emphasis in gasification technology development has been directed toward reduced-scale gasifier systems for distributed generation at remote sites. The domestic distributed power generation market over the next decade is expected to be 5-6 gigawatts per year. The global increase is expected at 20 gigawatts over the next decade. The economics of gasification for distributed power generation are significantly improved when fuel transport is minimized. Until recently, gasification technology has been synonymous with coal conversion. Presently, however, interest centers on providing clean-burning fuel to remote sites that are not necessarily near coal supplies but have sufficient alternative carbonaceous material to feed a small gasifier. Gasifiers up to 50 MW are of current interest, with emphasis on those of 5-MW generating capacity. Internal combustion engines offer a more robust system for utilizing the fuel gas, while fuel cells and microturbines offer higher electric conversion efficiencies. The initial focus of this multiyear effort was on internal combustion engines and microturbines as more realistic near-term options for distributed generation. In this project, we studied emerging gasification technologies that can provide gas from regionally available feedstock as fuel to power generators under 30 MW in a distributed generation setting. Larger-scale gasification, primarily coal-fed, has been used commercially for more than 50 years to produce clean synthesis gas for the refining, chemical, and power industries. Commercial-scale gasification activities are under way at 113 sites in 22 countries in North and South America, Europe, Asia, Africa, and Australia, according to the Gasification Technologies Council. Gasification studies were carried out on alfalfa, black liquor (a high-sodium waste from the pulp industry), cow manure, and willow on the laboratory scale and on alfalfa, black liquor, and willow on the bench scale. Initial parametric tests

  19. Time evaluation of discharges of suspension solids in the treated acid waters from the Osamu Utsumi - INB - Brazil; Avaliacao temporal das descargas de solidos em suspensao nas aguas acidas tratadas da mina Osamu Utsumi/INB

    Energy Technology Data Exchange (ETDEWEB)

    Maculan, Gabriella Giarola [Universidade Federal de Alfenas (UNIFAL), Pocos de caldas, MG (Brazil); Alberti, Heber Luiz Caponi, E-mail: heber@cnen.gov.br [Comissao Nacional de Energia Nuclear (LAPOC/CNEN), Pocos de Caldas, MG (Brazil). Laboratorio de Pocos de Caldas

    2011-07-01

    The present work presents only the flow and mass variations of particles on the the treated water at the points of interface with the environment. The region presents two very well established stations (dry and rainy), and the generated flows also presented oscillations as function of the hydrological year. The full knowledge of the hydrological fluxes involved in the Mine Acid Draining generation is essential for the elaboration of solutions aiming to minimize the environmental and costs impacts associated to the environmental passive generated by uranium mining

  20. Pulsed current generator

    International Nuclear Information System (INIS)

    Semenov, V.D.; Furman, Eh.G.

    1974-01-01

    The paper describes a current pulse generator with an auxiliary network consisting of a choke and diode in series designed to enlarge the range of pulse frequency control. One output of the network is connected to an adjustable valve cathode and via antoher auxiliary condenser to the point where the cathode of the main key unit is joined to the start of the magnetizing coil. A second output is connected to the anode of another adjustable valve and via another auxiliary condenser to the point where the anode of the other main key unit is joined to the end of the magnetizing coil. The generator can be used to excite the electromagnets of charged particle accelerators or in devices designed to produce magnetic fields. (author)

  1. Why three generations?

    Directory of Open Access Journals (Sweden)

    Masahiro Ibe

    2016-07-01

    Full Text Available We discuss an anthropic explanation of why there exist three generations of fermions. If one assumes that the right-handed neutrino sector is responsible for both the matter–antimatter asymmetry and the dark matter, then anthropic selection favors three or more families of fermions. For successful leptogenesis, at least two right-handed neutrinos are needed, while the third right-handed neutrino is invoked to play the role of dark matter. The number of the right-handed neutrinos is tied to the number of generations by the anomaly constraints of the U(1B−L gauge symmetry. Combining anthropic arguments with observational constraints, we obtain predictions for the X-ray observations, as well as for neutrinoless double-beta decay.

  2. Second harmonic generation imaging

    CERN Document Server

    2013-01-01

    Second-harmonic generation (SHG) microscopy has shown great promise for imaging live cells and tissues, with applications in basic science, medical research, and tissue engineering. Second Harmonic Generation Imaging offers a complete guide to this optical modality, from basic principles, instrumentation, methods, and image analysis to biomedical applications. The book features contributions by experts in second-harmonic imaging, including many pioneering researchers in the field. Written for researchers at all levels, it takes an in-depth look at the current state of the art and possibilities of SHG microscopy. Organized into three sections, the book: Provides an introduction to the physics of the process, step-by-step instructions on how to build an SHG microscope, and comparisons with related imaging techniques Gives an overview of the capabilities of SHG microscopy for imaging tissues and cells—including cell membranes, muscle, collagen in tissues, and microtubules in live cells—by summarizing experi...

  3. Choice probability generating functions

    DEFF Research Database (Denmark)

    Fosgerau, Mogens; McFadden, Daniel; Bierlaire, Michel

    2010-01-01

    This paper establishes that every random utility discrete choice model (RUM) has a representation that can be characterized by a choice-probability generating function (CPGF) with specific properties, and that every function with these specific properties is consistent with a RUM. The choice...... probabilities from the RUM are obtained from the gradient of the CPGF. Mixtures of RUM are characterized by logarithmic mixtures of their associated CPGF. The paper relates CPGF to multivariate extreme value distributions, and reviews and extends methods for constructing generating functions for applications....... The choice probabilities of any ARUM may be approximated by a cross-nested logit model. The results for ARUM are extended to competing risk survival models....

  4. High energy neutron generator

    International Nuclear Information System (INIS)

    Barjon, R.; Breynat, G.

    1987-01-01

    This patent describes a generator of fast neutrons only slightly contaminated by neutrons of energy less than 15 MeV, comprising a source of charged particles of energy equal to at least 15 MeV, a target made of lithium deuteride, and means for cooling the target. The target comprises at least two elements placed in series in the path of the charged particles and separated from each other, the thickness of each of the elements being selected as a function of the average energy of the charged particles emitted from the source and the energy of the fast neutrons to be generated such that neutrons of energy equal to at least 15 MeV are emitted in the forward direction in response to the bombardment of the target from behind by the charged particles. The target cooling means comprises means for circulating between and around the elements a gas which does not chemically react with lithium deuteride

  5. The intense neutron generator

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, W B

    1966-07-01

    The presentation discusses both the economic and research contexts that would be served by producing neutrons in gram quantities at high intensities by electrical means without uranium-235. The revenue from producing radioisotopes is attractive. The array of techniques introduced by the multipurpose 65 megawatt Intense Neutron Generator project includes liquid metal cooling, superconducting magnets for beam bending and focussing, super-conductors for low-loss high-power radiofrequency systems, efficient devices for producing radiofrequency power, plasma physics developments for producing and accelerating hydrogen, ions at high intensity that are still far out from established practice, a multimegawatt high voltage D.C. generating machine that could have several applications. The research fields served relate principally to materials science through neutron-phonon and other quantum interactions as well as through neutron diffraction. Nuclear physics is served through {mu}-, {pi}- and K-meson production. Isotope production enters many fields of applied research. (author)

  6. Electric power generation

    International Nuclear Information System (INIS)

    Pinske, J.D.

    1981-01-01

    Apart from discussing some principles of power industry the present text deals with the different ways of electric power generation. Both the conventional methods of energy conversion in heating and water power stations and the facilities for utilizing regenerative energy sources (sun, wind, ground heat, tidal power) are considered. The script represents the essentials of the lecture of the same name which is offered to the students of the special subject 'electric power engineering' at the Fachhochschule Hamburg. It does not require any special preliminary knowledge except for the general principles of electrical engineering. It is addressing students of electrical engineering who have passed their preliminary examination at technical colleges and universities. Moreover, it shall also be of use for engineers who want to obtain a quick survey of the structure and the operating characteristics of the extremely different technical methods of power generation. (orig.) [de

  7. Inflow Turbulence Generation Methods

    Science.gov (United States)

    Wu, Xiaohua

    2017-01-01

    Research activities on inflow turbulence generation methods have been vigorous over the past quarter century, accompanying advances in eddy-resolving computations of spatially developing turbulent flows with direct numerical simulation, large-eddy simulation (LES), and hybrid Reynolds-averaged Navier-Stokes-LES. The weak recycling method, rooted in scaling arguments on the canonical incompressible boundary layer, has been applied to supersonic boundary layer, rough surface boundary layer, and microscale urban canopy LES coupled with mesoscale numerical weather forecasting. Synthetic methods, originating from analytical approximation to homogeneous isotropic turbulence, have branched out into several robust methods, including the synthetic random Fourier method, synthetic digital filtering method, synthetic coherent eddy method, and synthetic volume forcing method. This article reviews major progress in inflow turbulence generation methods with an emphasis on fundamental ideas, key milestones, representative applications, and critical issues. Directions for future research in the field are also highlighted.

  8. Thermoacoustic magnetohydrodynamic electrical generator

    International Nuclear Information System (INIS)

    Wheatley, J.C.; Swift, G.W.; Migliori, A.

    1986-01-01

    A thermoacoustic magnetohydrodynamic electrical generator is described comprising a magnet having a magnetic field, an elongate hollow housing containing an electrically conductive liquid and a thermoacoustic structure positioned in the liquid, heat exchange means thermally connected to the thermoacoustic structure for inducing the liquid to oscillate at an acoustic resonant frequency within the housing. The housing is positioned in the magnetic field and oriented such that the direction of the magnetic field and the direction of oscillatory motion of the liquid are substantially orthogonal to one another, first and second electrical conductor means connected to the liquid on opposite sides of the housing along an axis which is substantially orthogonal to both the direction of the magnetic field and the direction of oscillatory motion of the liquid, an alternating current output signal is generated in the conductor means at a frequency corresponding to the frequency of the oscillatory motion of the liquid

  9. Short pulse neutron generator

    Science.gov (United States)

    Elizondo-Decanini, Juan M.

    2016-08-02

    Short pulse neutron generators are described herein. In a general embodiment, the short pulse neutron generator includes a Blumlein structure. The Blumlein structure includes a first conductive plate, a second conductive plate, a third conductive plate, at least one of an inductor or a resistor, a switch, and a dielectric material. The first conductive plate is positioned relative to the second conductive plate such that a gap separates these plates. A vacuum chamber is positioned in the gap, and an ion source is positioned to emit ions in the vacuum chamber. The third conductive plate is electrically grounded, and the switch is operable to electrically connect and disconnect the second conductive plate and the third conductive plate. The at least one of the resistor or the inductor is coupled to the first conductive plate and the second conductive plate.

  10. JET flywheel generators

    International Nuclear Information System (INIS)

    Huart, M.; Sonnerup, L.

    1986-01-01

    Two large vertical shaft flywheel generators each provides the JET device with peak power up to 400 MW and energy up to 2600 MJ per pulse to induce and confine the multi-mega-ampere plasma current. The integrated rotor flywheel consists of a 650 tonne/10 m diameter rim carrying the poles of the machine. The energy is stored kinetically during a 9 min interval of acceleration from half-speed to full-speed and then released during a 20 s long deceleration. A design life of 100 000 cycles at full energy rating was specified. The mechanical design and construction of the generators is reviewed. Particular attention is paid to the assessment of the stresses and fatigue life of the rotor system, its dynamic behaviour (rim movement, critical speed and balancing) and on the performance in operation of the large thrust bearing. (author)

  11. Parallel Polarization State Generation.

    Science.gov (United States)

    She, Alan; Capasso, Federico

    2016-05-17

    The control of polarization, an essential property of light, is of wide scientific and technological interest. The general problem of generating arbitrary time-varying states of polarization (SOP) has always been mathematically formulated by a series of linear transformations, i.e. a product of matrices, imposing a serial architecture. Here we show a parallel architecture described by a sum of matrices. The theory is experimentally demonstrated by modulating spatially-separated polarization components of a laser using a digital micromirror device that are subsequently beam combined. This method greatly expands the parameter space for engineering devices that control polarization. Consequently, performance characteristics, such as speed, stability, and spectral range, are entirely dictated by the technologies of optical intensity modulation, including absorption, reflection, emission, and scattering. This opens up important prospects for polarization state generation (PSG) with unique performance characteristics with applications in spectroscopic ellipsometry, spectropolarimetry, communications, imaging, and security.

  12. Vertical steam generator

    International Nuclear Information System (INIS)

    Cuda, F.; Kondr, M.; Kresta, M.; Kusak, V.; Manek, O.; Turon, S.

    1982-01-01

    A vertical steam generator for nuclear power plants and dual purpose power plants consists of a cylindrical vessel in which are placed heating tubes in the form upside-down U. The heating tubes lead to the jacket of the cylindrical collector placed in the lower part of the steam generator perpendicularly to its vertical axis. The cylindrical collector is divided by a longitudinal partition into the inlet and outlet primary water sections of the heating tubes. One ends of the heating tube leads to the jacket of the collector for primary water feeding and the second ends of the heating tubes into the jacket of the collector which feeds and offtakes primary water from the heating tubes. (B.S.)

  13. Power generation statistics

    International Nuclear Information System (INIS)

    Kangas, H.

    2001-01-01

    The frost in February increased the power demand in Finland significantly. The total power consumption in Finland during January-February 2001 was about 4% higher than a year before. In January 2001 the average temperature in Finland was only about - 4 deg C, which is nearly 2 degrees higher than in 2000 and about 6 degrees higher than long term average. Power demand in January was slightly less than 7.9 TWh, being about 0.5% less than in 2000. The power consumption in Finland during the past 12 months exceeded 79.3 TWh, which is less than 2% higher than during the previous 12 months. In February 2001 the average temperature was - 10 deg C, which was about 5 degrees lower than in February 2000. Because of this the power consumption in February 2001 increased by 5%. Power consumption in February was 7.5 TWh. The maximum hourly output of power plants in Finland was 13310 MW. Power consumption of Finnish households in February 2001 was about 10% higher than in February 2000, and in industry the increase was nearly zero. The utilization rate in forest industry in February 2001 decreased from the value of February 2000 by 5%, being only about 89%. The power consumption of the past 12 months (Feb. 2000 - Feb. 2001) was 79.6 TWh. Generation of hydroelectric power in Finland during January - February 2001 was 10% higher than a year before. The generation of hydroelectric power in Jan. - Feb. 2001 was nearly 2.7 TWh, corresponding to 17% of the power demand in Finland. The output of hydroelectric power in Finland during the past 12 months was 14.7 TWh. The increase from the previous 12 months was 17% corresponding to over 18% of the power demand in Finland. Wind power generation in Jan. - Feb. 2001 was exceeded slightly 10 GWh, while in 2000 the corresponding output was 20 GWh. The degree of utilization of Finnish nuclear power plants in Jan. - Feb. 2001 was high. The output of these plants was 3.8 TWh, being about 1% less than in Jan. - Feb. 2000. The main cause for the

  14. Next generation vaccines.

    Science.gov (United States)

    Riedmann, Eva M

    2011-07-01

    In February this year, about 100 delegates gathered for three days in Vienna (Austria) for the Next Generation Vaccines conference. The meeting held in the Vienna Hilton Hotel from 23rd-25th February 2011 had a strong focus on biotech and industry. The conference organizer Jacob Fleming managed to put together a versatile program ranging from the future generation of vaccines to manufacturing, vaccine distribution and delivery, to regulatory and public health issues. Carefully selected top industry experts presented first-hand experience and shared solutions for overcoming the latest challenges in the field of vaccinology. The program also included several case study presentations on novel vaccine candidates in different stages of development. An interactive pre-conference workshop as well as interactive panel discussions during the meeting allowed all delegates to gain new knowledge and become involved in lively discussions on timely, interesting and sometimes controversial topics related to vaccines.

  15. The intense neutron generator

    International Nuclear Information System (INIS)

    Lewis, W.B.

    1966-01-01

    The presentation discusses both the economic and research contexts that would be served by producing neutrons in gram quantities at high intensities by electrical means without uranium-235. The revenue from producing radioisotopes is attractive. The array of techniques introduced by the multipurpose 65 megawatt Intense Neutron Generator project includes liquid metal cooling, superconducting magnets for beam bending and focussing, super-conductors for low-loss high-power radiofrequency systems, efficient devices for producing radiofrequency power, plasma physics developments for producing and accelerating hydrogen, ions at high intensity that are still far out from established practice, a multimegawatt high voltage D.C. generating machine that could have several applications. The research fields served relate principally to materials science through neutron-phonon and other quantum interactions as well as through neutron diffraction. Nuclear physics is served through μ-, π- and K-meson production. Isotope production enters many fields of applied research. (author)

  16. Electrochemical energy generation

    International Nuclear Information System (INIS)

    Kreysa, G.; Juettner, K.

    1993-01-01

    The proceedings encompass 40 conference papers belonging to the following subject areas: Baseline and review papers; electrochemical fuel cells; batteries: Primary and secondary cells; electrochemical, regenerative systems for energy conversion; electrochemical hydrogen generation; electrochemistry for nuclear power plant; electrochemistry for spent nuclear fuel reprocessing; energy efficiency in electrochemical processes. There is an annex listing the authors and titles of the poster session, and compacts of the posters can be obtained from the office of the Gesellschaft Deutscher Chemiker, Abteilung Tagungen. (MM) [de

  17. Second generation registry framework.

    Science.gov (United States)

    Bellgard, Matthew I; Render, Lee; Radochonski, Maciej; Hunter, Adam

    2014-01-01

    Information management systems are essential to capture data be it for public health and human disease, sustainable agriculture, or plant and animal biosecurity. In public health, the term patient registry is often used to describe information management systems that are used to record and track phenotypic data of patients. Appropriate design, implementation and deployment of patient registries enables rapid decision making and ongoing data mining ultimately leading to improved patient outcomes. A major bottleneck encountered is the static nature of these registries. That is, software developers are required to work with stakeholders to determine requirements, design the system, implement the required data fields and functionality for each patient registry. Additionally, software developer time is required for ongoing maintenance and customisation. It is desirable to deploy a sophisticated registry framework that can allow scientists and registry curators possessing standard computing skills to dynamically construct a complete patient registry from scratch and customise it for their specific needs with little or no need to engage a software developer at any stage. This paper introduces our second generation open source registry framework which builds on our previous rare disease registry framework (RDRF). This second generation RDRF is a new approach as it empowers registry administrators to construct one or more patient registries without software developer effort. New data elements for a diverse range of phenotypic and genotypic measurements can be defined at any time. Defined data elements can then be utilised in any of the created registries. Fine grained, multi-level user and workgroup access can be applied to each data element to ensure appropriate access and data privacy. We introduce the concept of derived data elements to assist the data element standards communities on how they might be best categorised. We introduce the second generation RDRF that

  18. Wind power generation

    International Nuclear Information System (INIS)

    Anon.

    1999-01-01

    The monthly statistics of wind electric power generation in Denmark are compiled from information given by the owners of private wind turbines. The data are arranged according to the size of the turbines. For each wind turbine the name of the site and type of turbine is given as well as the production during the last 3 months in 1998, and the total production in 1997 and 1998. Data on the operation is given

  19. Wind power. [electricity generation

    Science.gov (United States)

    Savino, J. M.

    1975-01-01

    A historical background on windmill use, the nature of wind, wind conversion system technology and requirements, the economics of wind power and comparisons with alternative systems, data needs, technology development needs, and an implementation plan for wind energy are presented. Considerable progress took place during the 1950's. Most of the modern windmills feature a wind turbine electricity generator located directly at the top of their rotor towers.

  20. Generation of monoenergetic positrons

    International Nuclear Information System (INIS)

    Hulett, L.D. Jr.; Dale, J.M.; Miller, P.D. Jr.; Moak, C.D.; Pendyala, S.; Triftshaeuser, W.; Howell, R.H.; Alvarez, R.A.

    1983-01-01

    Many experiments have been performed in the generation and application of monoenergetic positron beams using annealed tungsten moderators and fast sources of 58 Co, 22 Na, 11 C, and LINAC bremstrahlung. This paper will compare the degrees of success from our various approaches. Moderators made from both single crystal and polycrystal tungsten have been tried. Efforts to grow thin films of tungsten to be used as transmission moderators and brightness enhancement devices are in progress

  1. Equilibrium and generators

    International Nuclear Information System (INIS)

    Balter, H.S.

    1994-01-01

    This work studies the behaviour of radionuclides when it produce a desintegration activity,decay and the isotopes stable creation. It gives definitions about the equilibrium between activity of parent and activity of the daughter, radioactive decay,isotope stable and transient equilibrium and maxim activity time. Some considerations had been given to generators that permit a disgregation of two radioisotopes in equilibrium and its good performance. Tabs

  2. "Asset Ownership Across Generations"

    OpenAIRE

    Ngina S. Chiteji; Frank P. Stafford

    2000-01-01

    This paper examines cross-generational connections in asset ownership. It begins by presenting a theoretical framework that develops the distinction between the intergenerational transfer of knowledge about financial assets and the direct transfer of dollars from parents to children. Its analysis of data from the Panel Study of Income Dynamics (PSID) reveals intergenerational correlations in asset ownership, and we find evidence to suggest that parental asset ownership or family-based exposur...

  3. Choice Probability Generating Functions

    DEFF Research Database (Denmark)

    Fosgerau, Mogens; McFadden, Daniel L; Bierlaire, Michel

    This paper considers discrete choice, with choice probabilities coming from maximization of preferences from a random utility field perturbed by additive location shifters (ARUM). Any ARUM can be characterized by a choice-probability generating function (CPGF) whose gradient gives the choice...... probabilities, and every CPGF is consistent with an ARUM. We relate CPGF to multivariate extreme value distributions, and review and extend methods for constructing CPGF for applications....

  4. Mechanisms for generating froissaron

    International Nuclear Information System (INIS)

    Glushko, N.I.; Kobylinski, N.A.; Martynov, E.S.; Shelest, V.P.

    1982-01-01

    From a common point of view, we consider the mechanisms for generating froissaron which arise due to the quasieikonal approximation, the U-matrix approach and the method of continued unitarity. A realistic model for the input pomeron is suggested and the data on high-energy pp-scattering are described. Likeness and difference of asymptotic and preasymptotic regimes for three variants of froissaron are discussed

  5. 350 KVA motor generators

    CERN Multimedia

    CERN PhotoLab

    1974-01-01

    Each logic circuit in the central computers consumes only a fraction of a watt: however, the final load constituted by many such circuits plus peripheral equipment is nearly half a million watts. Shown here are two 350 KVA motor generators used to convert 50 Hz mains to 60 Hz (US standard). Flywheels on the M.G. shafts remove power dropouts of up to 0.5 s.

  6. Micro watt thermocurrent generator

    International Nuclear Information System (INIS)

    Bustard, T.; Goslee, D.; Barr, H.

    1976-01-01

    This nuclear thermocurrent generator to feed a cardic pacemaker should have higher life expectancy and reliability than was previously achieved. For this purpose a gettering arrangement is connected to be heat conducting immediately adjacent to the nuclear fuel arrangement in an evacuated casing. The gettering arrangement can be operated to activate at as high a temperature as possible, from 121 0 C to preferably about 204 0 C, so that a high vacuum is maintained. The current generating thermal column works at a temperature difference of 55.6 0 C. As the cold end of the column is connected to the outer casing, and should be held to a mean body temperature of 37.8 0 C, the hot side of the thermal column may only be heated to 93.4 0 C. The temperature jump from 121 0 or 204 0 to 93.4 0 is produced by a thermal resistance inserted between the hot side of the thermal column and the fuel arrangement. It may consist of a spacer made of stainless steel or by a gap, while in this first arrangement the nuclear heat generator is situated between the gettering arrangement and the thermal column, another arrangement shows the gettering arrangement enclosed in the fuel arrangement and thermal column. Here the heat flows in one direction only, the required temperature gradient is produced by suitable construction of the heat contacts between the 3 elements. Detailed constructional and manufacturing data are given for both models. Plutonium oxide is welded into a double casing as heat generator, in example the casing is made of nickel alloy. 1/10 gram of plutonium supplies a thermal energy of 50m watts, which produces a thermal current of 300 to 400 micro watts at 0.3V. (RW) [de

  7. Four Generations in Phenomenology

    Energy Technology Data Exchange (ETDEWEB)

    Kribs, Graham D. [Department of Physics, University of Oregon, Eugene, OR 97403 (United States); Plehn, Tilman [SUPA, School of Physics, University of Edinburgh, Edinburgh EH9 3JZ, Scotland (HCP speaker) (United Kingdom); Spannowsky, Michael [ASC, Department fuer Physik, Ludwig-Maximilians-Universitaet Muenchen, 80333 Muenchen (Germany); Tait, Tim M.P. [HEP Division, Argonne National Laboratory, 9700 Cass Ave., Argonne, IL 60439 (United States)

    2008-03-15

    In four-generation models Higgs masses of 115-315 GeV are perfectly allowed by electroweak precision data. In this mass range we find dramatic effects on Higgs phenomenology at hadron colliders: production rates are enhanced, weak-boson-fusion channels are suppressed, angular distributions are modified, Higgs pairs can be observed, and Higgs decays to Majorana neutrinos can lead to exotic signals.

  8. Automated Test Case Generation

    CERN Multimedia

    CERN. Geneva

    2015-01-01

    I would like to present the concept of automated test case generation. I work on it as part of my PhD and I think it would be interesting also for other people. It is also the topic of a workshop paper that I am introducing in Paris. (abstract below) Please note that the talk itself would be more general and not about the specifics of my PhD, but about the broad field of Automated Test Case Generation. I would introduce the main approaches (combinatorial testing, symbolic execution, adaptive random testing) and their advantages and problems. (oracle problem, combinatorial explosion, ...) Abstract of the paper: Over the last decade code-based test case generation techniques such as combinatorial testing or dynamic symbolic execution have seen growing research popularity. Most algorithms and tool implementations are based on finding assignments for input parameter values in order to maximise the execution branch coverage. Only few of them consider dependencies from outside the Code Under Test’s scope such...

  9. Electricity generation cost

    International Nuclear Information System (INIS)

    Bald, M.

    1984-01-01

    Also questions of efficiency play a part in the energy discussion. In this context, the economic evaluation of different energy supply variants is of importance. Especially with regard to the generation of electric power there have been discussions again and again during the last years on the advantage of the one or the other kind of electric power generation. In the meantime, a large number of scientific studies has been published on this topic which mainly deal with comparisons of the costs of electric power generated by hard coal or nuclear energy, i.e. of those energy forms which still have the possibilities of expansion. The following part shows a way for the evaluation of efficiency comparisons which starts from simplified assumptions and which works with arithmetical aids, which don't leave the area of the fundamental operations. The general comprehensibility is paid for with cuts on ultimate analytical and arithmetical precision. It will, however, turn out that the results achieved by this method don't differ very much from those which have been won by scientific targets. (orig./UA) [de

  10. Linear wind generator

    International Nuclear Information System (INIS)

    Kozarov, A.; Petrov, O.; Antonov, J.; Sotirova, S.; Petrova, B.

    2006-01-01

    The purpose of the linear wind-power generator described in this article is to decrease the following disadvantages of the common wind-powered turbine: 1) large bending and twisting moments to the blades and the shaft, especially when strong winds and turbulence exist; 2) significant values of the natural oscillation period of the construction result in the possibility of occurrence of destroying resonance oscillations; 3) high velocity of the peripheral parts of the rotor creating a danger for birds; 4) difficulties, connected with the installation and the operation on the mountain ridges and passages where the wind energy potential is the largest. The working surfaces of the generator in questions driven by the wind are not connected with a joint shaft but each moves along a railway track with few oscillations. So the sizes of each component are small and their number can be rather large. The mechanical trajectory is not a circle but a closed outline in a vertical plain, which consists of two rectilinear sectors, one above the other, connected in their ends by semi-circumferences. The mechanical energy of each component turns into electrical on the principle of the linear electrical generator. A regulation is provided when the direction of the wind is perpendicular to the route. A possibility of effectiveness is shown through aiming of additional quantities of air to the movable components by static barriers

  11. The event generator SIMON

    International Nuclear Information System (INIS)

    Durand, D.; Lopez, O.; Nguyen, A.D.

    1997-01-01

    The utilization and development of SIMON generator work was conducted at LPC.This generator was conceived for simple and versatile simulations of different processes occurring in the nuclear collisions at Fermi Energies. At present it is utilized in a large number of French foreign laboratories. Particularly, certain analyses of INDRA data have been done by use of this generator: estimation of collective energy in the Xe + Sn and Gd + U central collisions; shape and space-time correlation analysis in fragment-fragment and particle-fragment output of the same system; calorimetric study of the Xe + Sn and Ar + Ni system; study of the vaporization for the Ar + Ni system. Recently a number of items were improved or modified, among which: the initial configuration was allowed to be non-spherical what permits the analysis of the semi-central collisions; a so-called pre-fragmentation emission may be included to estimate different time constants implied in the fragmentation process

  12. Steam generator life management

    International Nuclear Information System (INIS)

    King, P.; McGillivray, R.; Reinhardt, W.; Millman, J.; King, B.; Schneider, W.

    2003-01-01

    'Full-Text:' Steam Generator Life Management responsibility embodies doing whatever is necessary to maintain the steam generation equipment of a nuclear plant in effective, reliable service. All comes together in that most critical deliverable, namely the submission of the documentation which wins approval for return to service after an outage program. Life management must address all aspects of SG reliability over the life of the plant. Nevertheless, the life management activities leading up to return to service approval is where all of it converges. Steam Generator Life Management activities entail four types of work, all equally important in supporting the objective of successful operation. These activities are i) engineering functions; including identification of inspection and maintenance requirements, outage planning and scope definition plus engineering assessment, design and analysis as necessary to support equipment operation, ii) fitness of service work; including the expert evaluation of degradation mechanisms, disposition of defects for return to service or not, and the fitness for service analysis as required to justify ongoing operation with acceptable defects, iii) inspection work; including large scale eddy current inspection of tubing, the definition of defect size and character, code inspections of pressure vessel integrity and visual inspections for integrity and iv) maintenance work; including repairs, retrofits, cleaning and modifications, all as necessary to implement the measures defined during activities i) through iii). The paper discusses the approach and execution of the program for the achievement of the above objectives and particularly of items i) and ii). (author)

  13. Generation Z: Educating and Engaging the Next Generation of Students

    Science.gov (United States)

    Seemiller, Corey; Grace, Meghan

    2017-01-01

    In 1995, the Internet was born. So, too, was Generation Z. The oldest of this post-Millennial generation arrived to college in 2013, and more than four years later, Generation Z students fill the nation's classrooms, campus programs, and residence halls. In order to recruit, educate, and graduate this new generational cohort effectively, educators…

  14. Superconducting wind turbine generators

    International Nuclear Information System (INIS)

    Abrahamsen, A B; Seiler, E; Zirngibl, T; Andersen, N H; Mijatovic, N; Traeholt, C; Pedersen, N F; Oestergaard, J; Noergaard, P B

    2010-01-01

    We have examined the potential of 10 MW superconducting direct drive generators to enter the European offshore wind power market and estimated that the production of about 1200 superconducting turbines until 2030 would correspond to 10% of the EU offshore market. The expected properties of future offshore turbines of 8 and 10 MW have been determined from an up-scaling of an existing 5 MW turbine and the necessary properties of the superconducting drive train are discussed. We have found that the absence of the gear box is the main benefit and the reduced weight and size is secondary. However, the main challenge of the superconducting direct drive technology is to prove that the reliability is superior to the alternative drive trains based on gearboxes or permanent magnets. A strategy of successive testing of superconducting direct drive trains in real wind turbines of 10 kW, 100 kW, 1 MW and 10 MW is suggested to secure the accumulation of reliability experience. Finally, the quantities of high temperature superconducting tape needed for a 10 kW and an extreme high field 10 MW generator are found to be 7.5 km and 1500 km, respectively. A more realistic estimate is 200-300 km of tape per 10 MW generator and it is concluded that the present production capacity of coated conductors must be increased by a factor of 36 by 2020, resulting in a ten times lower price of the tape in order to reach a realistic price level for the superconducting drive train.

  15. Closing the generation gap

    International Nuclear Information System (INIS)

    Silverstein, E.

    1997-09-01

    The author has explained how the naive obstructions to unifying vacua with different net generation numbers can be overcome, and she gave a class of examples of chirality-changing phase transitions in four dimensions. The phenomenon exhibited here presumably occurs quite generally; it would be very interesting to understand whether in fact one can connect all vacua with N ≤ 1 supersymmetry at low energies. For this an F-theory analysis could be quite instructive, once that approach is developed more fully for four-folds. Perhaps the next in principle question to ask along these lines is whether there could be any physical process which changes the number of supersymmetries

  16. Improvements to vapor generators

    International Nuclear Information System (INIS)

    Keller, Arthur; Monroe, Neil.

    1976-01-01

    A supporting system is proposed for vapor generators of the 'supported' type. Said supporting system is intended to compensate the disparities of thermal expansion due to the differences in the vertical dimensions of the tubes in the walls of the combustion chamber and their collectors compared to that of the balloon tanks and the connecting tube clusters of vaporization, the first one being longer than the second ones. Said system makes it possible to build said combustion chamber higher than the balloon tanks and the tube clusters of vaporization. The capacity of steam production is thus enhanced [fr

  17. Nuclear power generating costs

    International Nuclear Information System (INIS)

    Srinivasan, M.R.; Kati, S.L.; Raman, R.; Nanjundeswaran, K.; Nadkarny, G.V.; Verma, R.S.; Mahadeva Rao, K.V.

    1983-01-01

    Indian experience pertaining to investment and generation costs of nuclear power stations is reviewed. The causes of investment cost increases are analysed and the increases are apportioned to escalation, design improvements and safety related adders. The paper brings out the fact that PHWR investment costs in India compare favourably with those experienced in developed countries in spite of the fact that the programme and the unit size are relatively much smaller in India. It brings out that in India at current prices a nuclear power station located over 800 km from coal reserves and operating at 75% capacity factor is competitive with thermal power at 60% capacity factor. (author)

  18. Next generation data harmonization

    Science.gov (United States)

    Armstrong, Chandler; Brown, Ryan M.; Chaves, Jillian; Czerniejewski, Adam; Del Vecchio, Justin; Perkins, Timothy K.; Rudnicki, Ron; Tauer, Greg

    2015-05-01

    Analysts are presented with a never ending stream of data sources. Often, subsets of data sources to solve problems are easily identified but the process to align data sets is time consuming. However, many semantic technologies do allow for fast harmonization of data to overcome these problems. These include ontologies that serve as alignment targets, visual tools and natural language processing that generate semantic graphs in terms of the ontologies, and analytics that leverage these graphs. This research reviews a developed prototype that employs all these approaches to perform analysis across disparate data sources documenting violent, extremist events.

  19. Steam generator tube performance

    International Nuclear Information System (INIS)

    Tatone, O.S.; Pathania, R.S.

    1984-10-01

    A review of the performance of steam generator tubes in 116 water-cooled nuclear power reactors showed that tubes were plugged at 54 (46 percent) of the reactors. The number of tubes removed from service decreased from 4 692 (0.30 percent) in 1981 to 3 222 (0.20 percent) in 1982. The leading causes of tube failures were stress corrosion cracking from the primary side, stress corrosion cracking (or intergranular attack) from the secondary side and pitting corrosion. The lowest incidence of corrosion-induced defects from the secondary side occurred in reactors that have used only volatile treatment, with or without condensate demineralization

  20. Steam generator tube performance

    International Nuclear Information System (INIS)

    Tatone, O.S.; Tapping, R.L.; Stipan, L.

    1992-03-01

    A survey of steam generator operating experience for 1986 has been carried out for 184 pressurized water and pressurized heavy-water reactors, and 1 water-cooled, graphite-moderated reactor. Tubes were plugged at 75 of the reactors (40.5%). In 1986, 3737 tubes were plugged (0.14% of those in service) and 3148 tubes were repaired by sleeving. A small number of reactors accounted for the bulk of the plugged tubes, a phenomenon consistent with previous years. For 1986, the available tubesheet sludge data for 38 reactors has been compiled into tabular form, and sludge/deposit data will be incorporated into all future surveys

  1. Semiconductor thermoelectric generators

    CERN Document Server

    Fahrner, Wolfgang R

    2009-01-01

    It is well-known that fossil fuels are being rapidly depleted, and that atomic power is rejected by many people. As a consequence, there is a strong trend towards alternative sources such as wind, photovoltaics, solar heat and biomass. Strangely enough, quite another power source is generally neglected: namely, the thermoelectric generator (a device which converts heat, i.e. thermal energy, directly into electrical energy). The reason for this neglect is probably the low conversion efficiency, which is of the order of a few percent at most. However, there are two arguments in favor of the ther

  2. PLEXOS Input Data Generator

    Energy Technology Data Exchange (ETDEWEB)

    2017-02-01

    The PLEXOS Input Data Generator (PIDG) is a tool that enables PLEXOS users to better version their data, automate data processing, collaborate in developing inputs, and transfer data between different production cost modeling and other power systems analysis software. PIDG can process data that is in a generalized format from multiple input sources, including CSV files, PostgreSQL databases, and PSS/E .raw files and write it to an Excel file that can be imported into PLEXOS with only limited manual intervention.

  3. Choice probability generating functions

    DEFF Research Database (Denmark)

    Fosgerau, Mogens; McFadden, Daniel; Bierlaire, Michel

    2013-01-01

    This paper considers discrete choice, with choice probabilities coming from maximization of preferences from a random utility field perturbed by additive location shifters (ARUM). Any ARUM can be characterized by a choice-probability generating function (CPGF) whose gradient gives the choice...... probabilities, and every CPGF is consistent with an ARUM. We relate CPGF to multivariate extreme value distributions, and review and extend methods for constructing CPGF for applications. The choice probabilities of any ARUM may be approximated by a cross-nested logit model. The results for ARUM are extended...

  4. Radioisotope and radiopharmaceutical generators

    International Nuclear Information System (INIS)

    Barak, M.; Winchell, H.W.

    1975-01-01

    A chromatographic column for generating technetium-99m isotopes and technetium-99m labeled pharmaceuticals in a simple two-step process is described. Technetium-99m pertechnetate in a first step is isolated by adsorption upon an adsorbent packing. Then the technetium-99m in a second step is eluted from the packing, either with an immediately labeled biological compound to form a radiopharmaceutical, or by a controlled volume of eluant to produce a 99m-technetium-bearing eluate of a desired specific concentration. (Official Gazette)

  5. Computer generated holographic microtags

    International Nuclear Information System (INIS)

    Sweatt, W.C.

    1998-01-01

    A microlithographic tag comprising an array of individual computer generated holographic patches having feature sizes between 250 and 75 nanometers is disclosed. The tag is a composite hologram made up of the individual holographic patches and contains identifying information when read out with a laser of the proper wavelength and at the proper angles of probing and reading. The patches are fabricated in a steep angle Littrow readout geometry to maximize returns in the -1 diffracted order. The tags are useful as anti-counterfeiting markers because of the extreme difficulty in reproducing them. 5 figs

  6. Biomass Energy Generation Project

    Energy Technology Data Exchange (ETDEWEB)

    Olthoff, Edward [Cedar Falls Utilities, Cedar Falls, IA (United States)

    2017-05-15

    The Municipal Electric Utility of the City of Cedar Falls (dba Cedar Fals Utilities or CFU) received a congressionally directed grant funded through DOE-EERE to run three short (4 hour) duration test burns and one long (10 days) duration test burn to test the viability of renewable fuels in Streeter Station Boiler #6, a stoker coal fired electric generation unit. The long test burn was intended to test supply chain assumptions, optimize boiler combustion and assess the effects of a longer duration burn of biomass on the boiler.

  7. Steam generator arrangement

    International Nuclear Information System (INIS)

    Ssinegurski, E.

    1981-01-01

    A steam flow path arrangement for covering the walls of the rear gas pass of a steam generator is disclosed. The entire flow passes down the sidewalls with a minor portion then passing up through the rear wall to a superheater inlet header at an intermediate elevation. The major portion of the flow passes up the front wall and through hanger tubes to a roof header. From there the major portion passes across the roof and down the rear wall to the superheater inlet header at the intermediate elevation

  8. Generation of earthquake signals

    International Nuclear Information System (INIS)

    Kjell, G.

    1994-01-01

    Seismic verification can be performed either as a full scale test on a shaker table or as numerical calculations. In both cases it is necessary to have an earthquake acceleration time history. This report describes generation of such time histories by filtering white noise. Analogue and digital filtering methods are compared. Different methods of predicting the response spectrum of a white noise signal filtered by a band-pass filter are discussed. Prediction of both the average response level and the statistical variation around this level are considered. Examples with both the IEEE 301 standard response spectrum and a ground spectrum suggested for Swedish nuclear power stations are included in the report

  9. Isotopic Thermionic Generator

    International Nuclear Information System (INIS)

    Clemot, M.; Devin, B.; Durand, J.P.

    1967-01-01

    This report describes the general design of a thermionic direct conversion space generator. The power source used is a radioisotope. Two radioisotopes are considered: Pu 238 and Cm 244. The system is made up of a heat pipe concentrating the thermal flux from the isotope to the emitter, and of a second heat pipe evacuating the waste heat from the collector to the outer wall used as radiating panel. Calculations are given in the particular case of a 100 electrical watts output power. (authors) [fr

  10. Code Generation with Templates

    CERN Document Server

    Arnoldus, Jeroen; Serebrenik, A

    2012-01-01

    Templates are used to generate all kinds of text, including computer code. The last decade, the use of templates gained a lot of popularity due to the increase of dynamic web applications. Templates are a tool for programmers, and implementations of template engines are most times based on practical experience rather than based on a theoretical background. This book reveals the mathematical background of templates and shows interesting findings for improving the practical use of templates. First, a framework to determine the necessary computational power for the template metalanguage is presen

  11. Review of Micro Magnetic Generator

    Directory of Open Access Journals (Sweden)

    Lin DU

    2014-08-01

    Full Text Available This paper discusses the research progress of micro magnetic generator systems. Micro magnetic generator systems convert energy from the environment to electric energy with advantages as high reliability, high power density, long life time and can be applied to extreme environment. This paper summarizes methods for improving generator performance of micro magnetic generator, including rotational magnetic generator, vibrational magnetic generator and hybrid magnetic generator, analyzes and compares their design and performance, and concludes key technologies and ongoing challenges for further progress. The paper is instructive and meaningful to for research work of related field.

  12. Simple and Realistic Data Generation

    DEFF Research Database (Denmark)

    Pedersen, Kenneth Houkjær; Torp, Kristian; Wind, Rico

    2006-01-01

    This paper presents a generic, DBMS independent, and highly extensible relational data generation tool. The tool can efficiently generate realistic test data for OLTP, OLAP, and data streaming applications. The tool uses a graph model to direct the data generation. This model makes it very simple...... to generate data even for large database schemas with complex inter- and intra table relationships. The model also makes it possible to generate data with very accurate characteristics....

  13. Emotion-driven level generation

    OpenAIRE

    Togelius, Julian; Yannakakis, Georgios N.

    2016-01-01

    This chapter examines the relationship between emotions and level generation. Grounded in the experience-driven procedural content generation framework we focus on levels and introduce a taxonomy of approaches for emotion-driven level generation. We then review four characteristic level generators of our earlier work that exemplify each one of the approaches introduced. We conclude the chapter with our vision on the future of emotion-driven level generation.

  14. A molecular noise generator

    International Nuclear Information System (INIS)

    Lu Ting; Ferry, Michael; Hasty, Jeff; Weiss, Ron

    2008-01-01

    Recent studies have demonstrated that intracellular variations in the rate of gene expression are of fundamental importance to cellular function and development. While such 'noise' is often considered detrimental in the context of perturbing genetic systems, it can be beneficial in processes such as species diversification and facilitation of evolution. A major difficulty in exploring such effects is that the magnitude and spectral properties of the induced variations arise from some intrinsic cellular process that is difficult to manipulate. Here, we present two designs of a molecular noise generator that allow for the flexible modulation of the noise profile of a target gene. The first design uses a dual-signal mechanism that enables independent tuning of the mean and variability of an output protein. This is achieved through the combinatorial control of two signals that regulate transcription and translation separately. We then extend the design to allow for DNA copy-number regulation, which leads to a wider tuning spectrum for the output molecule. To gain a deeper understanding of the circuit's functionality in a realistic environment, we introduce variability in the input signals in order to ascertain the degree of noise induced by the control process itself. We conclude by illustrating potential applications of the noise generator, demonstrating how it could be used to ascertain the robust or fragile properties of a genetic circuit

  15. Next generation CANDU plants

    International Nuclear Information System (INIS)

    Hedges, K.R.; Yu, S.K.W.

    1998-01-01

    Future CANDU designs will continue to meet the emerging design and performance requirements expected by the operating utilities. The next generation CANDU products will integrate new technologies into both the product features as well as into the engineering and construction work processes associated with delivering the products. The timely incorporation of advanced design features is the approach adopted for the development of the next generation of CANDU. AECL's current products consist of 700MW Class CANDU 6 and 900 MW Class CANDU 9. Evolutionary improvements are continuing with our CANDU products to enhance their adaptability to meet customers ever increasing need for higher output. Our key product drivers are for improved safety, environmental protection and improved cost effectiveness. Towards these goals we have made excellent progress in Research and Development and our investments are continuing in areas such as fuel channels and passive safety. Our long term focus is utilizing the fuel cycle flexibility of CANDU reactors as part of the long term energy mix

  16. Next generation toroidal devices

    International Nuclear Information System (INIS)

    Yoshikawa, Shoichi

    1998-10-01

    A general survey of the possible approach for the next generation toroidal devices was made. Either surprisingly or obviously (depending on one's view), the technical constraints along with the scientific considerations lead to a fairly limited set of systems for the most favorable approach for the next generation devices. Specifically if the magnetic field strength of 5 T or above is to be created by superconducting coils, it imposes minimum in the aspect ratio for the tokamak which is slightly higher than contemplated now for ITER design. The similar technical constraints make the minimum linear size of a stellarator large. Scientifically, it is indicated that a tokamak of 1.5 times in the linear dimension should be able to produce economically, especially if a hybrid reactor is allowed. For the next stellarator, it is strongly suggested that some kind of helical axis is necessary both for the (almost) absolute confinement of high energy particles and high stability and equilibrium beta limits. The author still favors a heliac most. Although it may not have been clearly stated in the main text, the stability afforded by the shearless layer may be exploited fully in a stellarator. (author)

  17. Next generation toroidal devices

    Energy Technology Data Exchange (ETDEWEB)

    Yoshikawa, Shoichi [Princeton Plasma Physics Lab., Princeton Univ., NJ (United States)

    1998-10-01

    A general survey of the possible approach for the next generation toroidal devices was made. Either surprisingly or obviously (depending on one`s view), the technical constraints along with the scientific considerations lead to a fairly limited set of systems for the most favorable approach for the next generation devices. Specifically if the magnetic field strength of 5 T or above is to be created by superconducting coils, it imposes minimum in the aspect ratio for the tokamak which is slightly higher than contemplated now for ITER design. The similar technical constraints make the minimum linear size of a stellarator large. Scientifically, it is indicated that a tokamak of 1.5 times in the linear dimension should be able to produce economically, especially if a hybrid reactor is allowed. For the next stellarator, it is strongly suggested that some kind of helical axis is necessary both for the (almost) absolute confinement of high energy particles and high stability and equilibrium beta limits. The author still favors a heliac most. Although it may not have been clearly stated in the main text, the stability afforded by the shearless layer may be exploited fully in a stellarator. (author)

  18. Stretchable piezoelectric nanocomposite generator.

    Science.gov (United States)

    Park, Kwi-Il; Jeong, Chang Kyu; Kim, Na Kyung; Lee, Keon Jae

    2016-01-01

    Piezoelectric energy conversion that generate electric energy from ambient mechanical and vibrational movements is promising energy harvesting technology because it can use more accessible energy resources than other renewable natural energy. In particular, flexible and stretchable piezoelectric energy harvesters which can harvest the tiny biomechanical motions inside human body into electricity properly facilitate not only the self-powered energy system for flexible and wearable electronics but also sensitive piezoelectric sensors for motion detectors and in vivo diagnosis kits. Since the piezoelectric ZnO nanowires (NWs)-based energy harvesters (nanogenerators) were proposed in 2006, many researchers have attempted the nanogenerator by using the various fabrication process such as nanowire growth, electrospinning, and transfer techniques with piezoelectric materials including polyvinylidene fluoride (PVDF) polymer and perovskite ceramics. In 2012, the composite-based nanogenerators were developed using simple, low-cost, and scalable methods to overcome the significant issues with previously-reported energy harvester, such as insufficient output performance and size limitation. This review paper provides a brief overview of flexible and stretchable piezoelectric nanocomposite generator for realizing the self-powered energy system with development history, power performance, and applications.

  19. Future nuclear power generation

    International Nuclear Information System (INIS)

    Mosbah, D.S.; Nasreddine, M.

    2006-01-01

    The book includes an introduction then it speaks about the options to secure sources of energy, nuclear power option, nuclear plants to generate energy including light-water reactors (LWR), heavy-water reactors (HWR), advanced gas-cooled reactors (AGR), fast breeder reactors (FBR), development in the manufacture of reactors, fuel, uranium in the world, current status of nuclear power generation, economics of nuclear power, nuclear power and the environment and nuclear power in the Arab world. A conclusion at the end of the book suggests the increasing demand for energy in the industrialized countries and in a number of countries that enjoy special and economic growth such as China and India pushes the world to search for different energy sources to insure the urgent need for current and anticipated demand in the near and long-term future in light of pessimistic and optimistic outlook for energy in the future. This means that states do a scientific and objective analysis of the currently available data for the springboard to future plans to secure the energy required to support economy and welfare insurance.

  20. ULSGEN (Uplink Summary Generator)

    Science.gov (United States)

    Wang, Y.-F.; Schrock, M.; Reeve, T.; Nguyen, K.; Smith, B.

    2014-01-01

    Uplink is an important part of spacecraft operations. Ensuring the accuracy of uplink content is essential to mission success. Before commands are radiated to the spacecraft, the command and sequence must be reviewed and verified by various teams. In most cases, this process requires collecting the command data, reviewing the data during a command conference meeting, and providing physical signatures by designated members of various teams to signify approval of the data. If commands or sequences are disapproved for some reason, the whole process must be restarted. Recording data and decision history is important for traceability reasons. Given that many steps and people are involved in this process, an easily accessible software tool for managing the process is vital to reducing human error which could result in uplinking incorrect data to the spacecraft. An uplink summary generator called ULSGEN was developed to assist this uplink content approval process. ULSGEN generates a web-based summary of uplink file content and provides an online review process. Spacecraft operations personnel view this summary as a final check before actual radiation of the uplink data. .

  1. Steam generator materials

    International Nuclear Information System (INIS)

    Kim, Joung Soo; Han, J. H.; Kim, H. P.; Lim, Y. S.; Lee, D. H.; Suh, J. H.; Hwang, S. S.; Hur, D. H.; Kim, D. J.; Kim, Y. H.

    2002-05-01

    In order to keep the nuclear power plant(NPP)s safe and increase their operating efficiency, axial stress corrosion cracking(SCC)(IGA/IGSCC, PWSCC, PbSCC) test techniques were developed and SCC property data of the archive steam generator tubing materials having been used in nuclear power plants operating in Korea were produced. The data obtained in this study were data-based, which will be used to clarify the damage mechanisms, to operate the plants safely, and to increase the lifetime of the tubing. In addition, the basic technologies for the improvement of the SCC property of the tubing materials, for new SCC inhibition, for damaged tube repair, and for manufacturing processes of the tubing were developed. In the 1 phase of this long term research, basic SCC test data obtained from the archive steam generator tubing materials used in NPPs operating in Korea were established. These basic technologies developed in the 1 phase will be used in developing process optimization during the 2 phase in order to develop application technologies to the field nuclear power plants

  2. Technical evaluation of biomass gasification technology integrated with combined cycle using bagasse as fuel; Avaliacao tecnica da tecnologia de gaseificacao de biomassa integrada a ciclos combinados utilizando bagaco como combustivel

    Energy Technology Data Exchange (ETDEWEB)

    Ortiz, Pablo Silva; Venturini, Osvaldo Jose; Lora, Electo Silva [Universidade Federal de Itajuba (NEST/UNIFEI), MG (Brazil). Nucleo de Excelencia em Geracao Termeletrica e Distribuida], email: pablo.silvaortiz@gmail.com; Campo, Andres Perez [Universidade Automona de Bucaramanga (UNAB) (Colombia). Fac. de Engenharia Fisico- Mecanica, Engenharia em Energia

    2010-07-01

    Biomass Integrated Gasification Combined Cycle (BIGCC) was identified as an advanced technology with potential to be competitive for electricity generation. The BIGCC technology uses biomass and the sub products of some industrial sectors processing, like sugar cane, as feedstock. The current Brazilian energy matrix is mainly based on renewable generation sources, making it important to assess these gasification technologies in the production of sugar, ethanol and electricity. In this work, a technical evaluation of the technologies incorporated in BIGCC power plants is done: the gasification process and the combined cycle power plant. On the other hand, the generated costs of these systems are analyzed, and the potential for implementation in Brazil plants from sugar cane bagasse is studied, in which a 10% increase in efficiency is obtained. (author)

  3. Teaching Millennials and Generation Z: Bridging the Generational Divide.

    Science.gov (United States)

    Shatto, Bobbi; Erwin, Kelly

    2017-02-01

    Most undergraduate students today are part of the millennial generation. However, the next wave of students-Generation Z-are just beginning to enter universities. Although these groups share many similarities, they each have unique characteristics that create challenges in the classroom. Incorporating technology, engaging students with adaptive learning activities, and understanding basic generational differences are ways to limit the effects of generational conflict while keeping both millennials and Generation Z students engaged in learning. It is important to understand basic differences and distinctions across generations for developing pedagogy that reaches these unique student populations.

  4. Experimental evaluation of the performance and emissions of diesel engines using blends of crude castor oil and diesel; Avaliacao experimental do desempenho e emissoes de motores diesel usando misturas de oleo de mamona e oleo diesel

    Energy Technology Data Exchange (ETDEWEB)

    Pimentel, Valeria Said de Barros; Pereira, Pedro Paulo [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Dept. de Engenharia Mecanica; Belchior, Carlos Rodrigues Pereira [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Dept. de Engenharia Oceanica

    2004-07-01

    This work refers to the experimental evaluation of diesel generators operating with blend of crude castor oil and diesel. Performance and emissions tests were accomplished in a diesel engine of direct injection. Because of the high viscosity of the blend a device was installed on the engine in order to lower the blend viscosity. A comprehensive analysis of the results obtained in these tests indicates the possibility of use of the blend of castor oil and diesel as fuel for diesel-generators, with modifications introduced in the engines. (author)

  5. Manual for the ELL (2) - parser generator and tree generator generator

    OpenAIRE

    Heckmann, Reinhold

    1986-01-01

    Regular right part grammars extended by tree generator specifications are interpreted by a combined parser generator and tree generator that produces an ELL(2) parser. This parser is able to translate programs of the specified language into abstract syntax trees according to the tree specifications in the generator input.

  6. Tri-generation nation

    International Nuclear Information System (INIS)

    Pichon, Max

    2010-01-01

    Full text: Sydney and Melbourne councils are looking to outperform each other with ambitious greenhouse and energy efficiency initiatives. Sydney wants to cut CO_2 by 70 per cent by 2030, while Melbourne's 1200 Buildings retrofit project speaks for itself. One key technology both councils are tapping is trigeneration, which generates electricity, heating and cooling from local gas-fired power units. From a physics perspective, a combustion process cannot be more than 30 per cent efficient, so capturing and using the waste heat can lead to great savings. Sydney Lord Mayor Clover Moore said a third of the council's carbon reduction goal of 3.9Mt a year by 2030 will come from tri-gen. Melbourne is aiming to achieve zero net emissions by 2020, which means eliminating 5.8Mt of CO_2, a lot of it through tri-gen. It has already seen a surge among landlords. GPT, Stockland and Mirvac have all stuck tri-gen units in Sydney office developments, while newly carbon- neutral NAB has installed the technology on its data centre in Melbourne and expects to save 20,000 tonnes of CO_2 a year. But one expert, while welcoming the spike in popularity, says there are traps for the unwary. Johnson Controls' Peter Moser sees two core drivers for its uptake. “First is the prominence of GreenStar and NABERS. Many companies will move to tri-gen as they will want the extra points or stars,” he told WME. “Secondly, there is the continuous increase in the price of energy. At the same time there may be an [emissions trading scheme] or a carbon price introduced, and that puts pressure on the consumer. Combining those two scenarios will see more people adopt tri-gen because it will become more economically viable and the payback periods of tri-gen will come down considerably.” But he points to the importance of pre-planning when considering tri-gen, warning. “To put tri-gen into a building, let alone retrofit a whole city and make it work, you need highly complex teams working together

  7. Wind Generators and Market Power

    DEFF Research Database (Denmark)

    Misir, Nihat

    price thresholds are significantly higher when the monopolist at the peakload level owns both types of generators. Furthermore, when producing electricity with the peakload generator, the monopolist can avoid facing prices below marginal cost by owning a certain share of the wind generators.......Electricity production from wind generators holds significant importance in European Union’s 20% renewable energy target by 2020. In this paper, I show that ownership of wind generators affects market outcomes by using both a Cournot oligopoly model and a real options model. In the Cournot...... oligopoly model, ownership of the wind generators by owners of fossil-fueled (peakload) generators decreases total peakload production and increases the market price. These effects increase with total wind generation and aggregate wind generator ownership. In the real options model, start up and shut down...

  8. Generative Moire Structures

    Directory of Open Access Journals (Sweden)

    Adrian – Mihail Marian

    2006-01-01

    Full Text Available “GRAPHIC ON COMPUTER” – the work of the Czech Petar Milojevic, published in Titus Mocanu’s book “THE MODERN ART’S MORPHOLOGY”, in 1973, had great influence on me. I tried to discover the algorithm that generated this work. It was not so difficult to do and in a short time I was able to draw 12 such structures. In time, with interruptions, I have returned to this kind of works. In my personal exhibition “CYBERNETIC DESIGN” that took place at “M4-1-13-etopa” gallery of Pitesti, in March 1981, I have presented 8 such structures. To my joy, they had an impact on art lovers.

  9. Touchable Online Braille Generator

    Directory of Open Access Journals (Sweden)

    Wooseob Jeong

    2008-03-01

    Full Text Available A prototype of a touchable online Braille generator has been developed for the visually impaired or blind using force feedback technology, which has been used in video games for years. Without expensive devices, this prototype allows blind people to access information on the Web by touching output Braille displays with a force feedback mouse. The data collected from user studies conducted with blind participants has provided valuable information about the optimal conditions for the use of the prototype. The end product of this research will enable visually impaired people to enjoy information on the Web more freely.

  10. Second harmonic generation microscopy

    DEFF Research Database (Denmark)

    Brüggemann, Dagmar Adeline; Brewer, Jonathan R.; Risbo, Jens

    2010-01-01

    Myofibers and collagen show non-linear optical properties enabling imaging using second harmonic generation (SHG) microscopy. The technique is evaluated for use as a tool for real-time studies of thermally induced changes in thin samples of unfixed and unstained pork. The forward and the backward...... scattered SHG light reveal complementary features of the structures of myofibers and collagen fibers. Upon heating the myofibers show no structural changes before reaching a temperature of 53 °C. At this temperature the SHG signal becomes extinct. The extinction of the SHG at 53 °C coincides with a low......-temperature endotherm peak observable in the differential scanning calorimetry (DSC) thermograms. DSC analysis of epimysium, the connective tissue layer that enfold skeletal muscles, produces one large endotherm starting at 57 °C and peaking at 59.5 °C. SHG microscopy of collagen fibers reveals a variability of thermal...

  11. Generator for ionising radiation

    International Nuclear Information System (INIS)

    Romanovsky, V.F.; Panasjuk, V.S.; Stepanov, B.M.; Ovcharov, A.M.; Akimov, J.A.

    1979-01-01

    The generator for ionising radiation wherein a transmitter for ionising radiation contains a resonance transformer wherein the field coil is composed of a low voltage outside portion and a transformer coil, electrically connected with an electrically conducting housing of the resonance transformer, and an acclerating tube wherein the high voltage electrode is coupled with the high voltage end of the transformer coil of the resonance transformer and fixed to one of the ends of the tubular insulator of the accelerator tube, wherein the low voltage electrode is electrically connected with the housing of the resonance transformer and a source of charged particles is introduced into the evacuated inner space of the acceleration tube and electrically connected with one of the electrodes thereof, is described. (G.C.)

  12. Mood Dependent Music Generator

    DEFF Research Database (Denmark)

    Scirea, Marco

    2013-01-01

    Music is one of the most expressive media to show and manipulate emotions, but there have been few studies on how to generate music connected to emotions. Such studies have always been shunned upon by musicians affirming that a machine cannot create expressive music, as it's the composer......'s and player's experiences and emotions that get poured into the piece. At the same time another problem is that music is highly complicated (and subjective) and finding out which elements transmit certain emotions is not an easy task. This demo wants to show how the manipulation of a set of features can...... actually change the mood the music transmits, hopefully awakening an interest in this area of research....

  13. Light Beam Generation

    DEFF Research Database (Denmark)

    2007-01-01

    The invention relates to a method and a system for synthesizing a set of controllable light beams by provision of a system for synthesizing a set of light beams, comprising a spatially modulated light source for generation of electromagnetic radiation with a set of replicas of a predetermined......(x-xs, y-ys), a Fourier transforming lens for Fourier transforming the electromagnetic radiation, a first spatial light modulator for phase shifting the Fourier transformed electromagnetic radiation with the phase -F(u, v) of S*, S* is the complex conjugate of the Fourier transformed symbol s, a Fourier...... transforming lens for Inverse Fourier transforming the spatially modulated radiation, whereby a set of light beams are formed propagating through the inverse Fourier plane (x', y') at desired positions (x's, y's), and a controller for controlling the position of a replica of the symbol, s, for movement...

  14. Generation in Europe

    International Nuclear Information System (INIS)

    Aveline, Michelle; Mason, Laura.

    1994-01-01

    Information for this document has been collected from a range of primary sources which include annual reports, strategy statements and company information leaflets. The first part consists of profiles for each of the countries of Western Europe and selected countries in Eastern Europe. In each case an overview of the organization of the electricity industry is given and information where available on interconnections, new projects, ongoing work at existing plant, environmental issues and details of plant and closures. In the second part, details are given of some of the largest power generating companies in Europe listed in alphabetical order. The most up-to-date figures available have been used in all cases and the companies have been invited to comment on the text. (UK)

  15. Generation of electrical power

    International Nuclear Information System (INIS)

    Hursen, T.F.; Kolenik, S.A.; Purdy, D.L.

    1976-01-01

    A heat-to-electricity converter is disclosed which includes a radioactive heat source and a thermoelectric element of relatively short overall length capable of delivering a low voltage of the order of a few tenths of a volt. Such a thermoelectric element operates at a higher efficiency than longer higher-voltage elements; for example, elements producing 6 volts. In the generation of required power, the thermoelectric element drives a solid-state converter which is controlled by input current rather than input voltage and operates efficiently for a high signal-plus-noise to signal ratio of current. The solid-state converter has the voltage gain necessary to deliver the required voltage at the low input of the thermoelectric element

  16. Generator for radiological diagnostics

    Energy Technology Data Exchange (ETDEWEB)

    Seissl, J; Broenner, K; Krause, H

    1978-10-02

    A generator is described for X-ray diagnostics, with a high-voltage transformer with a primary coil connected or with the grid and a secondary coil feeding the X-ray tube and with a rectifier bridge situated in the primary circuit of the high-voltage transformer. The direct current branch of the rectifier bridge contains a filter capacitor and a thyristor which is opened and closed by means of a pulse duty factor determining the capacitor voltage and thus the voltage of the X-ray tube. An LC-tuned circuit is connected to the thyristor whose capacity is discharged to the conductive thyristor so that the thyristor is quenched via a free-wheel diode arranged in parallel to the thyristor. In this way, a high switching frequency of the thyristor and, consequently, a low ripple of the X-ray tube voltage is obtained.

  17. Peak power ratio generator

    Science.gov (United States)

    Moyer, R.D.

    A peak power ratio generator is described for measuring, in combination with a conventional power meter, the peak power level of extremely narrow pulses in the gigahertz radio frequency bands. The present invention in a preferred embodiment utilizes a tunnel diode and a back diode combination in a detector circuit as the only high speed elements. The high speed tunnel diode provides a bistable signal and serves as a memory device of the input pulses for the remaining, slower components. A hybrid digital and analog loop maintains the peak power level of a reference channel at a known amount. Thus, by measuring the average power levels of the reference signal and the source signal, the peak power level of the source signal can be determined.

  18. X-ray generator

    Energy Technology Data Exchange (ETDEWEB)

    Zucarias, A; Shepherd, J W

    1982-09-08

    An X-ray tube has a tubular envelope with a cathode for directing an electron beam onto a focal spot area of a spaced anode target to generate X-rays. The target is mounted for axial rotation on one end of a rotor disposed in an end portion of the envelope and encircled by a stator of an alternating current induction motor. An annular shield of high permeability magnetic material extends transversely between the electron beam and the stator of the induction motor for shunting stray or fringe electromagnetic fields established by the stator away from the electron beam to avoid consequent lateral deflections of the electron and corresponding lateral movements of the focal spot area.

  19. Superconducting wind turbine generators

    DEFF Research Database (Denmark)

    Abrahamsen, Asger Bech; Mijatovic, Nenad; Seiler, Eugen

    2010-01-01

    , the main challenge of the superconducting direct drive technology is to prove that the reliability is superior to the alternative drive trains based on gearboxes or permanent magnets. A strategy of successive testing of superconducting direct drive trains in real wind turbines of 10 kW, 100 kW, 1 MW and 10......We have examined the potential of 10 MW superconducting direct drive generators to enter the European offshore wind power market and estimated that the production of about 1200 superconducting turbines until 2030 would correspond to 10% of the EU offshore market. The expected properties of future...... offshore turbines of 8 and 10 MW have been determined from an up-scaling of an existing 5 MW turbine and the necessary properties of the superconducting drive train are discussed. We have found that the absence of the gear box is the main benefit and the reduced weight and size is secondary. However...

  20. Steam generator tube performance

    International Nuclear Information System (INIS)

    Tatone, O.S.; Pathania, R.S.

    1982-04-01

    The performance of steam generator tubes in water-cooled nuclear power reactors has been reviewed for 1980. Tube defects occurred at 38% of the 97 reactors surveyed. This is a marginal improvement over 1979 when defects occurred at 41% of the reactors. The number of failed tubes was also lower, 0.14% of the tubes in service in 1980 compared with 0.20% of those in service in 1979. Analysis of the causes of these failures indicates that stress corrosion cracking was the leading failure mechanism. Reactors that used all-volatile treatment of secondary water, with or without full-flow condensate demineralization since start-up showed the lowest incidence of corrosion-related defects

  1. Reloadable radioactive generator system

    International Nuclear Information System (INIS)

    Colombetti, L.G.

    1977-01-01

    A generator system that can be reloaded with an elutable radioactive material, such as 99 molybdenum, a multiple number of times is described. The system basically comprises a column filled with alumina, a loading vial containing a predetermined amount of the elutable radioactive material, and a rinsing vial containing a sterile solution. The two vials are connected by a conduit so that when communication is achieved between the column and loading vial and an evacuated vial is placed in communication with the bottom of the column, the predetermined amount of the radioactive material in the loading vial will be transferred to the column. The procedure can be repeated as the elutable material in the column is dissipated

  2. Steam generator tube performance

    International Nuclear Information System (INIS)

    Tatone, O.S.; Pathania, R.S.

    1983-08-01

    A review of the performance of steam generator tubes in 110 water-cooled nuclear power reactors showed that tubes were plugged at 46 (42 percent) of the reactors. The number of tubes removed from service increased from 1900 (0.14 percent) in 1980 to 4692 (0.30 percent) in 1981. The leading causes of tube failures were stress corrosion cracking from the primary side, stress corrosion cracking (or intergranular attack) from the secondary side and pitting corrosion. The lowest incidence of corrosion-induced defects from the secondary side occurred in reactors that used all-volatile treatment since start-up. At one reactor a large number of degraded tubes were repaired by sleeving which is expected to become an important method of tube repair in the future

  3. Turbulence generation by waves

    Energy Technology Data Exchange (ETDEWEB)

    Kaftori, D.; Nan, X.S.; Banerjee, S. [Univ. of California, Santa Barbara, CA (United States)

    1995-12-31

    The interaction between two-dimensional mechanically generated waves, and a turbulent stream was investigated experimentally in a horizontal channel, using a 3-D LDA synchronized with a surface position measuring device and a micro-bubble tracers flow visualization with high speed video. Results show that although the wave induced orbital motion reached all the way to the wall, the characteristics of the turbulence wall structures and the turbulence intensity close to the wall were not altered. Nor was the streaky nature of the wall layer. On the other hand, the mean velocity profile became more uniform and the mean friction velocity was increased. Close to the free surface, the turbulence intensity was substantially increased as well. Even in predominantly laminar flows, the introduction of 2-D waves causes three dimensional turbulence. The turbulence enhancement is found to be proportional to the wave strength.

  4. Photovoltaic Solar Energy Generation

    CERN Document Server

    Lotsch, H.K.V; U.Hoffmann, Volker; Rhodes, William T; Asakura, Toshimitsu; Brenner, Karl-Heinz; Hänsch, Theodor W; Kamiya, Takeshi; Krausz, Ferenc; Monemar, Bo; Venghaus, Herbert; Weber, Horst; Weinfurter, Harald

    2005-01-01

    This comprehensive description and discussion of photovoltaics (PV) is presented at a level that makes it accessible to the interested academic. Starting with an historical overview, the text outlines the relevance of photovoltaics today and in the future. Then follows an introduction to the physical background of solar cells and the most important materials and technologies, with particular emphasis placed on future developments and prospects. The book goes beyond technology by also describing the path from the cell to the module to the system, proceeding to important applications, such as grid-connected and stand-alone systems. The composition and development of the markets and the role of PV in future energy systems are also considered. Finally, the discussion turns to the future structure of energy supplies, expected to comprise more distributed generation, and addresses synergies and competition from other carbon-free energy sources.

  5. Steam generators in PWR's

    International Nuclear Information System (INIS)

    Michel, R.

    1974-01-01

    The steam generator of the PWR operates according to the principle of natural circulation. It consists of a U-shaped tube bundle whose free ends are welded to a bottom plate. The tube bundle is surrounded by a cylinder jacket which has slots closely above the bottom or tube plate. The feed water mixed with boiling water enters the tube bundle through these slots. Because of its buoyancy, the steam-water mixture flows upwards. Below the tube plate there are chambers for distributing and collecting pressurized water separated by means of a partition wall. By omitting some tubes, a free alloy is created so that the tubes in the center get sufficient water, too. By asymmetrical arrangement of the partition wall it is further possible to limit the tube alloy only to the inlet side for pressurized water. The flow over the tube plate is thus improved on the inlet side. (DG) [de

  6. Next generation breeding.

    Science.gov (United States)

    Barabaschi, Delfina; Tondelli, Alessandro; Desiderio, Francesca; Volante, Andrea; Vaccino, Patrizia; Valè, Giampiero; Cattivelli, Luigi

    2016-01-01

    The genomic revolution of the past decade has greatly improved our understanding of the genetic make-up of living organisms. The sequencing of crop genomes has completely changed our vision and interpretation of genome organization and evolution. Re-sequencing allows the identification of an unlimited number of markers as well as the analysis of germplasm allelic diversity based on allele mining approaches. High throughput marker technologies coupled with advanced phenotyping platforms provide new opportunities for discovering marker-trait associations which can sustain genomic-assisted breeding. The availability of genome sequencing information is enabling genome editing (site-specific mutagenesis), to obtain gene sequences desired by breeders. This review illustrates how next generation sequencing-derived information can be used to tailor genomic tools for different breeders' needs to revolutionize crop improvement. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  7. Generation of radioisotopes

    International Nuclear Information System (INIS)

    Panek-Finda, H.

    1984-01-01

    A method of producing radioisotopes for radiopharmaceutical applications is claimed. A physiological solution is used to elute a radioactive daughter isotope from a fission-produced parent isotope adsorbed on an adsorbent. The eluate containing the daughter isotope is purified with a cation-exchange material. In separate claims: the parent isotope is molybdenum-99; aluminium oxide which contains fully or partly hydrated manganese dioxide is used as the adsorbent for the parent isotope; a resin is used as the cation-exchange material; a strongly acid cation-exchange resin which has been neutralized is used as a resin; and a strongly acid cation-exchange resin which has been converted into the Na + , K + or NH 4 + form is used as a resin; an isotope generator system is also claimed

  8. Superconducting Wind Turbine Generators

    Directory of Open Access Journals (Sweden)

    Yunying Pan

    2016-08-01

    Full Text Available Wind energy is well known as a renewable energy because its clean and less polluted characteristic, which is the foundation of development modern wind electricity. To find more efficient wind turbine is the focus of scientists around the world. Compared from conventional wind turbines, superconducting wind turbine generators have advantages at zero resistance, smaller size and lighter weight. Superconducting wind turbine will inevitably become the main trends in this area. This paper intends to introduce the basic concept and principle of superconductivity, and compare form traditional wind turbine to obtain superiority, then to summary three proposed machine concept.While superconductivity have difficulty  in modern technology and we also have proposed some challenges in achieving superconducting wind turbine finally.

  9. A Clustering Graph Generator

    Energy Technology Data Exchange (ETDEWEB)

    Winlaw, Manda [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); De Sterck, Hans [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Sanders, Geoffrey [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-10-26

    In very simple terms a network can be de ned as a collection of points joined together by lines. Thus, networks can be used to represent connections between entities in a wide variety of elds including engi- neering, science, medicine, and sociology. Many large real-world networks share a surprising number of properties, leading to a strong interest in model development research and techniques for building synthetic networks have been developed, that capture these similarities and replicate real-world graphs. Modeling these real-world networks serves two purposes. First, building models that mimic the patterns and prop- erties of real networks helps to understand the implications of these patterns and helps determine which patterns are important. If we develop a generative process to synthesize real networks we can also examine which growth processes are plausible and which are not. Secondly, high-quality, large-scale network data is often not available, because of economic, legal, technological, or other obstacles [7]. Thus, there are many instances where the systems of interest cannot be represented by a single exemplar network. As one example, consider the eld of cybersecurity, where systems require testing across diverse threat scenarios and validation across diverse network structures. In these cases, where there is no single exemplar network, the systems must instead be modeled as a collection of networks in which the variation among them may be just as important as their common features. By developing processes to build synthetic models, so-called graph generators, we can build synthetic networks that capture both the essential features of a system and realistic variability. Then we can use such synthetic graphs to perform tasks such as simulations, analysis, and decision making. We can also use synthetic graphs to performance test graph analysis algorithms, including clustering algorithms and anomaly detection algorithms.

  10. A large capacity turbine generator for nuclear power generation

    International Nuclear Information System (INIS)

    Maeda, Susumu; Miki, Takahiro; Suzuki, Kazuichi

    2000-01-01

    In future large capacity nuclear power plant, capacity of a generator to be applied will be 1800 MVA of the largest class in the world. In response to this, the Mitsubishi Electric Co., Ltd. began to carry out element technology verification of a four-pole large capacity turbine generator mainly using upgrading technique of large capacity, since 1994 fiscal year. And, aiming at reliability verification of the 1800 MVA class generator, a model generator with same cross-section as that of an actual one was manufactured, to carry out some verifications on its electrified tests, and so on. Every performance evaluation result of tests on the model generator were good, and high reliability to design and manufacturing technique of the 1800 MVA class generator could be verified. In future, on the base of these technologies, further upgrading of reliability on the large capacity turbine generator for nuclear power generation is intended to be carried out. (G.K.)

  11. Steam-Generator Integrity Program/Steam-Generator Group Project

    International Nuclear Information System (INIS)

    1982-10-01

    The Steam Generator Integrity Program (SGIP) is a comprehensive effort addressing issues of nondestructive test (NDT) reliability, inservice inspection (ISI) requirements, and tube plugging criteria for PWR steam generators. In addition, the program has interactive research tasks relating primary side decontamination, secondary side cleaning, and proposed repair techniques to nondestructive inspectability and primary system integrity. The program has acquired a service degraded PWR steam generator for research purposes. This past year a research facility, the Steam Generator Examination Facility (SGEF), specifically designed for nondestructive and destructive examination tasks of the SGIP was completed. The Surry generator previously transported to the Hanford Reservation was then inserted into the SGEF. Nondestructive characterization of the generator from both primary and secondary sides has been initiated. Decontamination of the channelhead cold leg side was conducted. Radioactive field maps were established in the steam generator, at the generator surface and in the SGEF

  12. Cheaper power generation from surplus steam generating capacities

    International Nuclear Information System (INIS)

    Gupta, K.

    1996-01-01

    Prior to independence most industries had their own captive power generation. Steam was generated in own medium/low pressure boilers and passed through extraction condensing turbines for power generation. Extraction steam was used for process. With cheaper power made available in Nehru era by undertaking large hydro power schemes, captive power generation in industries was almost abandoned except in sugar and large paper factories, which were high consumers of steam. (author)

  13. A viable technology to generate third-generation biofuel

    DEFF Research Database (Denmark)

    Singh, Anoop; Olsen, Stig Irving; Nigam, Poonam Singh

    2011-01-01

    First generation biofuels are commercialized at large as the production technologies are well developed. However, to grow the raw materials, there is a great need to compromise with food security, which made first generation biofuels not so much promising. The second generation of biofuels does...

  14. Comparing Generative and Inter-generative Subjectivity in Post-Revolutionary Academic Generations in Iran

    Directory of Open Access Journals (Sweden)

    mehran Sohrabzadeh

    2010-01-01

    Full Text Available Comparative study of different post-revolutionary generation has been broadly applied by social scientists; among them some believe there is a gulf between generations, while some others endorsing some small differences among generations, emphasis that this variety is natural. Avoiding being loyal to any of these two views, the present study attempts to compare three different post-revolutionary academic generations using theory of “generative objects” which explores generations’ view about their behaviors, Beliefs, and historical monuments. Sampling was carried among 3 generations; firstly ones who were student in 60s and now are experienced faculties in the university, secondly ones who are recently employed as faculty members, and finally who are now students in universities. Results show that in all 3 generations there are essential in-generation similarities, while comparatively there are some differentiations in inter-generative analysis.

  15. Catalysis for alternative energy generation

    CERN Document Server

    2012-01-01

    Summarizes recent problems in using catalysts in alternative energy generation and proposes novel solutions  Reconsiders the role of catalysis in alternative energy generation  Contributors include catalysis and alternative energy experts from across the globe

  16. Canonical transformations and generating functionals

    NARCIS (Netherlands)

    Broer, L.J.F.; Kobussen, J.A.

    1972-01-01

    It is shown that canonical transformations for field variables in hamiltonian partial differential equations can be obtained from generating functionals in the same way as classical canonical transformations from generating functions. A simple proof of the relation between infinitesimal invariant

  17. Generators of Modern Wind Turbines

    DEFF Research Database (Denmark)

    Chen, Zhe

    2008-01-01

    In this paper, various types of wind generator configurations, including power electronic grid interfaces, drive trains, are described The performance in power systems is briefed. Then the optimization of generator system is presented. Some investigation results are presented and discussed....

  18. Steam generator sludge removal apparatus

    International Nuclear Information System (INIS)

    Schafer, B.W.; Werner, C.E.; Klahn, F.C.

    1992-01-01

    The present invention relates to equipment for cleaning steam generators and in particular to a high pressure fluid lance for cleaning sludge off the steam generator tubes away from an open tube lane. 6 figs

  19. Navy Advertising: Targeting Generation Z

    Science.gov (United States)

    2015-12-01

    NAVAL POSTGRADUATE SCHOOL MONTEREY, CALIFORNIA MBA PROFESSIONAL REPORT NAVY ADVERTISING : TARGETING GENERATION Z December......study recommends improvements for Navy advertising efficiency by examining characteristics of recruits defined as Generation Z. Data gathered from five

  20. Power generation and the environment

    International Nuclear Information System (INIS)

    Robert, L.E.J.; Liss, P.S.; Saunders, P.A.H.

    1990-01-01

    This book reviews environmental aspects of large-scale power generation. It includes historic background of present-generation patterns and a discussion of fossil fuel, nuclear energy, and renewable technologies

  1. Steam generators - problems and prognosis

    International Nuclear Information System (INIS)

    Tapping, R.L.

    1997-05-01

    Steam-generator problems, largely a consequence of corrosion and fouling, have resulted in increased inspection requirements and more regulatory attention to steam-generator integrity. In addition, utilities have had to develop steam-generator life-management strategies, including cleaning and replacement, to achieve design life. This paper summarizes the pertinent data to 1993/1994, and presents an overview of current steam-generator management practices. (author)

  2. Digital random-number generator

    Science.gov (United States)

    Brocker, D. H.

    1973-01-01

    For binary digit array of N bits, use N noise sources to feed N nonlinear operators; each flip-flop in digit array is set by nonlinear operator to reflect whether amplitude of generator which feeds it is above or below mean value of generated noise. Fixed-point uniform distribution random number generation method can also be used to generate random numbers with other than uniform distribution.

  3. Electromechanical x-ray generator

    Science.gov (United States)

    Watson, Scott A; Platts, David; Sorensen, Eric B

    2016-05-03

    An electro-mechanical x-ray generator configured to obtain high-energy operation with favorable energy-weight scaling. The electro-mechanical x-ray generator may include a pair of capacitor plates. The capacitor plates may be charged to a predefined voltage and may be separated to generate higher voltages on the order of hundreds of kV in the AK gap. The high voltage may be generated in a vacuum tube.

  4. Online branding to generation Z

    OpenAIRE

    Wirokarto, Dewi Alismah

    2013-01-01

    Mestrado em Marketing/ JEL Classification System: M31, I21, D71 Generation Z is the first generation growing up in a digitalized world, where Internet has become a primary need. Growing up with touch screens, smartphones and tablets impacts the development of this generation. They are born between mid 1990s and 2010. This research will attempt to demonstrate and support the assumption that Generation Z exhibits more Early adopters than the other adopter levels. Analyses...

  5. Self-assembling software generator

    Science.gov (United States)

    Bouchard, Ann M [Albuquerque, NM; Osbourn, Gordon C [Albuquerque, NM

    2011-11-25

    A technique to generate an executable task includes inspecting a task specification data structure to determine what software entities are to be generated to create the executable task, inspecting the task specification data structure to determine how the software entities will be linked after generating the software entities, inspecting the task specification data structure to determine logic to be executed by the software entities, and generating the software entities to create the executable task.

  6. Tredje generations coaching

    DEFF Research Database (Denmark)

    Stelter, Reinhard

    , vi dagligt skal forholde os til. Forfatterens forestilling om coaching tager udgangspunkt i en analyse af vort samfund – et samfund, der er kendetegnet af diversificering, identitetsudfordringer, ophævelse af vidensmonopolet, livslang uddannelse, nødvendighed til selvrefleksion mm. Bogen skal har...... dermed et særligt profil. Den skal markere (og skubbe til) en ny trend i coaching, som afgrænser sig fra pop coaching og GROW model o.l.. Coaching kan aldrig være ”the quick fix”. Vores tid tillader det bage ikke. Disse samfundsmæssige forandringer er grundlaget for coachingens eksistens og udbredelse......, men de skal også være fundament for den måde vi bedriver coaching. Derfor plæderer bogens forfatter for en 3. generations coaching i en form, hvor coachen og fokuspersonen mindre er fokuseret på løsninger, men i højere grad optaget af at skabe et rum til (selv)refleksion gennem en samskabende praksis....

  7. Inspiring a generation

    CERN Multimedia

    2012-01-01

    The motto of the 2012 Olympic and Paralympic Games is ‘Inspire a generation’ so it was particularly pleasing to see science, the LHC and Higgs bosons featuring so strongly in the opening ceremony of the Paralympics last week.   It’s a sign of just how far our field has come that such a high-profile event featured particle physics so strongly, and we can certainly add our support to that motto. If the legacy of London 2012 is a generation inspired by science as well as sport, then the games will have more than fulfilled their mission. Particle physics has truly inspiring stories to tell, going well beyond Higgs and the LHC, and the entire community has played its part in bringing the excitement of frontier research in particle physics to a wide audience. Nevertheless, we cannot rest on our laurels: maintaining the kind of enthusiasm for science we witnessed at the Paralympic opening ceremony will require constant vigilance, and creative thinking about ways to rea...

  8. Next Generation Science Partnerships

    Science.gov (United States)

    Magnusson, J.

    2016-02-01

    I will provide an overview of the Next Generation Science Standards (NGSS) and demonstrate how scientists and educators can use these standards to strengthen and enhance their collaborations. The NGSS are rich in content and practice and provide all students with an internationally-benchmarked science education. Using these state-led standards to guide outreach efforts can help develop and sustain effective and mutually beneficial teacher-researcher partnerships. Aligning outreach with the three dimensions of the standards can help make research relevant for target audiences by intentionally addressing the science practices, cross-cutting concepts, and disciplinary core ideas of the K-12 science curriculum that drives instruction and assessment. Collaborations between researchers and educators that are based on this science framework are more sustainable because they address the needs of both scientists and educators. Educators are better able to utilize science content that aligns with their curriculum. Scientists who learn about the NGSS can better understand the frameworks under which educators work, which can lead to more extensive and focused outreach with teachers as partners. Based on this model, the International Ocean Discovery Program (IODP) develops its education materials in conjunction with scientists and educators to produce accurate, standards-aligned activities and curriculum-based interactions with researchers. I will highlight examples of IODP's current, successful teacher-researcher collaborations that are intentionally aligned with the NGSS.

  9. Dynamical Mass Generation.

    Science.gov (United States)

    Mendel Horwitz, Roberto Ruben

    1982-03-01

    In the framework of the Glashow-Weinberg-Salem model without elementary scalar particles, we show that masses for fermions and intermediate vector bosons can be generated dynamically. The mechanism is the formation of fermion-antifermion pseudoscalar bound states of zero total four momentum, which form a condensate in the physical vacuum. The force responsible for the binding is the short distance part of the net Coulomb force due to photon and Z exchange. Fermions and bosons acquire masses through their interaction with this condensate. The neutrinos remain massless because their righthanded components have no interactions. Also the charge -1/3 quarks remain massless because the repulsive force from the Z exchange dominates over the Coulomb force. To correct this, we propose two possible modifications to the theory. One is to cut off the Z exchange at very small distances, so that all fermions except the neutrinos acquire masses, which are then, purely electromagnetic in origin. The other is to introduce an additional gauge boson that couples to all quarks with a pure vector coupling. To make this vector boson unobservable at usual energies, at least two new fermions must couple to it. The vector boson squared masses receive additive contributions from all the fermion squared masses. The photon remains massless and the masses of the Z and W('(+OR -)) bosons are shown to be related through the Weinberg angle in the conventional way. Assuming only three families of fermions, we obtain estimates for the top quark mass.

  10. Gearless wind power generator

    Energy Technology Data Exchange (ETDEWEB)

    Soederlund, L.; Ridanpaeae, P.; Vihriaelae, H.; Peraelae, R. [Tampere Univ. of Technology (Finland). Lab. of Electricity and Magnetism

    1998-10-01

    In the project a 100 kW axial flux permanent magnet wind power generator has been designed. The toroidal stator with air gap winding is placed between two rotating discs with permanent magnets. The magnet material is NdBFe due to its excellent magnetic properties compared to other materials. This type of topology enables a very large number of poles compared to conventional machine of the same size. A large number of poles is required to achieve a low rotational speed and consequently a direct driven system. The stator winding is formed by rectangular coils. The end winding is very short leading to small resistive losses. On the other hand, the absence of iron teeth causes eddy current losses in the conductors. These can be restricted to an acceptable level by keeping the wire diameter and flux density small. This means that the number of phases should be large. Several independent three phase systems may be used. The toothless stator also means that the iron losses are small and there exists no cogging torque

  11. Super power generators

    International Nuclear Information System (INIS)

    Martin, T.H.; Johnson, D.L.; McDaniel, D.H.

    1977-01-01

    PROTO II, a super power generator, is presently undergoing testing at Sandia Laboratories. It has operated with an 80 ns, 50 ns, 35 ns, and 20 ns positive output pulse high voltage mode and achieved total current rates of rise of 4 x 10 14 A/s. The two sided disk accelerator concept using two diodes has achieved voltages of 1.5 MV and currents of 4.5 MA providing a power exceeding 6 TW in the electron beam and 8 TW in the transmission lines. A new test bed named MITE (Magnetically Insulated Transmission Experiment) was designed and is now being tested. The pulse forming lines are back to back short pulse Blumleins which use untriggered water switching. Output data showing a ten ns half width power pulse peaking above one terrawatt were obtained. MITE is a module being investigated for use in the Electron Beam Fusion Accelerator and will be used to test the effects of short pulses propagating down vacuum transmission lines

  12. Gas turbine electric generator

    International Nuclear Information System (INIS)

    Nemoto, Masaaki; Yuhara, Tetsuo.

    1993-01-01

    When troubles are caused to a boundary of a gas turbine electric generator, there is a danger that water as an operation medium for secondary circuits leaks to primary circuits, to stop a plant and the plant itself can not resume. Then in the present invention, helium gases are used as the operation medium not only for the primary circuits but also for the secondary circuits, to provide so-called a direct cycle gas turbine system. Further, the operation media of the primary and secondary circuits are recycled by a compressor driven by a primary circuit gas turbine, and the turbine/compressor is supported by helium gas bearings. Then, problems of leakage of oil and water from the bearings or the secondary circuits can be solved, further, the cooling device in the secondary circuit is constituted as a triple-walled tube structure by way of helium gas, to prevent direct leakage of coolants into the reactor core even if cracks are formed to pipes. (N.H.)

  13. Generation III+ Reactor Portfolio

    International Nuclear Information System (INIS)

    2010-03-01

    While the power generation needs of utilities are unique and diverse, they are all faced with the double challenge of meeting growing electricity needs while curbing CO 2 emissions. To answer these diverse needs and help tackle this challenge, AREVA has developed several reactor models which are briefly described in this document: The EPR TM Reactor: designed on the basis of the Konvoi (Germany) and N4 (France) reactors, the EPRTM reactor is an evolutionary model designed to achieve best-in-class safety and operational performance levels. The ATMEA1 TM reactor: jointly designed by Mitsubishi Heavy Industries and AREVA through ATMEA, their common company. This reactor design benefits from the competencies and expertise of the two mother companies, which have commissioned close to 130 reactor units. The KERENA TM reactor: Designed on the basis of the most recent German BWR reactors (Gundremmingen) the KERENA TM reactor relies on proven technology while also including innovative, yet thoroughly tested, features. The optimal combination of active and passive safety systems for a boiling water reactor achieves a very low probability of severe accident

  14. Generating cancelable fingerprint templates.

    Science.gov (United States)

    Ratha, Nalini K; Chikkerur, Sharat; Connell, Jonathan H; Bolle, Ruud M

    2007-04-01

    Biometrics-based authentication systems offer obvious usability advantages over traditional password and token-based authentication schemes. However, biometrics raises several privacy concerns. A biometric is permanently associated with a user and cannot be changed. Hence, if a biometric identifier is compromised, it is lost forever and possibly for every application where the biometric is used. Moreover, if the same biometric is used in multiple applications, a user can potentially be tracked from one application to the next by cross-matching biometric databases. In this paper, we demonstrate several methods to generate multiple cancelable identifiers from fingerprint images to overcome these problems. In essence, a user can be given as many biometric identifiers as needed by issuing a new transformation "key." The identifiers can be cancelled and replaced when compromised. We empirically compare the performance of several algorithms such as Cartesian, polar, and surface folding transformations of the minutiae positions. It is demonstrated through multiple experiments that we can achieve revocability and prevent cross-matching of biometric databases. It is also shown that the transforms are noninvertible by demonstrating that it is computationally as hard to recover the original biometric identifier from a transformed version as by randomly guessing. Based on these empirical results and a theoretical analysis we conclude that feature-level cancelable biometric construction is practicable in large biometric deployments.

  15. Digitally programmable signal generator

    International Nuclear Information System (INIS)

    Priatko, G.J.; Kaskey, J.A.

    1988-01-01

    A digitally programmable signal generator (DPSG) includes a first memory from which data is written into a second memory formed of n banks. Each bank includes four memories and a multiplexer, the banks being read once during each time frame, the read-out bits being multiplexed and fed out serially in synchronism with a plurality of clock pulses occuring during a time frame. The resulting serial bit streams may be fed in parallel to a digital-to-analog converter. The DPSG can be used in applications such as Atomic Vapor Laser Isotope Separation (AVLIS) to create an optimal match between the process laser's spectral profile and that of the vaporized material, optical telecommunications, non-optical telecommunication in the microwave and radio spectrum, radar, electronic countermeasures, high speed computer interconnects, local area networks, high definition video transport and the multiplexing of large quantities of slow digital memory into high speed data streams. This invention extends the operation of DPSGs into the GHz range. (author)

  16. Geothermal Power Generation Plant

    Energy Technology Data Exchange (ETDEWEB)

    Boyd, Tonya [Oregon Inst. of Technology, Klamath Falls, OR (United States). Geo-Heat Center

    2013-12-01

    Oregon Institute of Technology (OIT) drilled a deep geothermal well on campus (to 5,300 feet deep) which produced 196°F resource as part of the 2008 OIT Congressionally Directed Project. OIT will construct a geothermal power plant (estimated at 1.75 MWe gross output). The plant would provide 50 to 75 percent of the electricity demand on campus. Technical support for construction and operations will be provided by OIT’s Geo-Heat Center. The power plant will be housed adjacent to the existing heat exchange building on the south east corner of campus near the existing geothermal production wells used for heating campus. Cooling water will be supplied from the nearby cold water wells to a cooling tower or air cooling may be used, depending upon the type of plant selected. Using the flow obtained from the deep well, not only can energy be generated from the power plant, but the “waste” water will also be used to supplement space heating on campus. A pipeline will be construction from the well to the heat exchanger building, and then a discharge line will be construction around the east and north side of campus for anticipated use of the “waste” water by facilities in an adjacent sustainable energy park. An injection well will need to be drilled to handle the flow, as the campus existing injection wells are limited in capacity.

  17. Next-Generation Pathology.

    Science.gov (United States)

    Caie, Peter D; Harrison, David J

    2016-01-01

    The field of pathology is rapidly transforming from a semiquantitative and empirical science toward a big data discipline. Large data sets from across multiple omics fields may now be extracted from a patient's tissue sample. Tissue is, however, complex, heterogeneous, and prone to artifact. A reductionist view of tissue and disease progression, which does not take this complexity into account, may lead to single biomarkers failing in clinical trials. The integration of standardized multi-omics big data and the retention of valuable information on spatial heterogeneity are imperative to model complex disease mechanisms. Mathematical modeling through systems pathology approaches is the ideal medium to distill the significant information from these large, multi-parametric, and hierarchical data sets. Systems pathology may also predict the dynamical response of disease progression or response to therapy regimens from a static tissue sample. Next-generation pathology will incorporate big data with systems medicine in order to personalize clinical practice for both prognostic and predictive patient care.

  18. Cracked gas generator

    Energy Technology Data Exchange (ETDEWEB)

    Abthoff, J; Schuster, H D; Gabler, R

    1976-11-17

    A small cracked-gas generator in a vehicle driven, in particular, by an air combustion engine has been proposed for the economic production of the gases necessary for low toxicity combustion from diesel fuel. This proceeds via catalytic crack-gasification and exploitation of residual heat from exhaust gases. This patent application foresees the insertion of one of the catalysts supporting the cracked-gas reaction in a container through which the reacting mixture for cracked-gas production flows in longitudinal direction. Further, air ducts are embedded in the catalyst through which exhaust gases and fresh air flow in counter direction to the cracked gas flow in the catalyst. The air vents are connected through heat conduction to the catalyst. A cracked gas constituting H/sub 2//CO/CO/sub 2//CH/sub 4/ and H/sub 2/O can be produced from the air-fuel mixture using appropriate catalysts. By the addition of 5 to 25% of cracked gas to the volume of air drawn in by the combustion engine, a more favourable combustion can be achieved compared to that obtained under normal combustion conditions.

  19. Methodology for evaluation of the stability of electric systems of offshore oil platforms in interconnected operations; Metodologia para a avaliacao dos sistemas eletricos das plataformas de petroleo offshore em operacao interligada

    Energy Technology Data Exchange (ETDEWEB)

    Ribeiro, Dalmo Junior; Mendes, Pedro Paulo de Carvalho [Universidade Federal de Itajuba (UNIFEI), MG (Brazil)

    2004-07-01

    The electric system of the platforms usually operates in an isolated way, requesting therefore a redundancy in the generating units so that a can have a reliable and uninterrupted system of their loads. A way to improve the quality in operation in terms of safety, reliability and economy can be the connection of the platforms of petroleum that are close, since it is viable. The objective of this work is to show the methodology for the stability study of the electric system in interlinked operation in way to detail the data of the equipment that are necessary, as: One line Diagram; Transmission lines; Transformers; Power system compensator; Generating; Speed regulators; Voltage regulators; Turbines and other. Another focus of the work is to show some control models and regulation of the electric system to maintain it stable and to show models for the interconnection of two or more platforms. (author)

  20. Effects of JPEG data compression on magnetic resonance imaging evaluation of small vessels ischemic lesions of the brain; Efeitos da compressao de dados JPEG na avaliacao de lesoes vasculares cerebrais isquemicas de pequenos vasos em ressonancia magnetica

    Energy Technology Data Exchange (ETDEWEB)

    Kuriki, Paulo Eduardo de Aguiar; Abdala, Nitamar; Nogueira, Roberto Gomes; Carrete Junior, Henrique; Szejnfeld, Jacob [Universidade Federal de Sao Paulo (UNIFESP/EPM), SP (Brazil). Dept. de Diagnostico por Imagem]. E-mail: paulokuriki@gmail.com

    2006-01-15

    Objective: to establish the maximum achievable JPEG compression ratio without affecting quantitative and qualitative magnetic resonance imaging analysis of ischemic lesion in small vessels of the brain. Material and method: fifteen DICOM images were converted to JPEG with a compression ratio of 1:10 to 1:60 and were assessed together with the original images by three neuro radiologists. The number, morphology and signal intensity of the lesions were analyzed. Results: lesions were properly identified up to a 1:30 ratio. More lesions were identified with a 1:10 ratio then in the original images. Morphology and edges were properly evaluated up toa 1:40 ratio. Compression did not affect signal. Conclusion: small lesions were identified ( < 2 mm ) and in all compression ratios the JPEG algorithm generated image noise that misled observers to identify more lesions in JPEG images then in DICOM images, thus generating false-positive results.(author)

  1. Engineering Education for Generation Z

    Science.gov (United States)

    Moore, Kevin; Jones, Carol; Frazier, Robert Scott

    2017-01-01

    Generation Z is gaining popularity as the name used to refer to those born beginning in the mid to late 1990s. This is the generation that follows the Millennials, and they are just starting to arrive on college campuses. Much attention has been paid to Millennials and their impact on society, and because of this Generation Z members are often…

  2. A new generation in computing

    International Nuclear Information System (INIS)

    Kahn, R.E.

    1983-01-01

    Fifth generation of computers is described. The three disciplines involved in bringing such a new generation to reality are: microelectronics; artificial intelligence and, computer systems and architecture. Applications in industry, offices, aerospace, education, health care and retailing are outlined. An analysis is given of research efforts in the US, Japan, U.K., and Europe. Fifth generation programming languages are detailed

  3. Laboratory generation of gravitational waves

    International Nuclear Information System (INIS)

    Pinto, I.M.; Rotoli, G.

    1988-01-01

    The authors have performed calculations on the basic type of gravitational wave electromagnetic laboratory generators. Their results show that laboratory generations of gravitational wave is at limit of state-of-the-art of present-day giant electromagnetic field generation

  4. Next Generation Summer School

    Science.gov (United States)

    Eugenia, Marcu

    2013-04-01

    On 21.06.2010 the "Next Generation" Summer School has opened the doors for its first students. They were introduced in the astronomy world by astronomical observations, astronomy and radio-astronomy lectures, laboratory projects meant to initiate them into modern radio astronomy and radio communications. The didactic programme was structure as fallowing: 1) Astronomical elements from the visible spectrum (lectures + practical projects) 2) Radio astronomy elements (lectures + practical projects) 3) Radio communication base (didactic- recreative games) The students and professors accommodation was at the Agroturistic Pension "Popasul Iancului" situated at 800m from the Marisel Observatory. First day (summer solstice day) began with a practical activity: determination of the meridian by measurements of the shadow (the direction of one vertical alignment, when it has the smallest length). The experiment is very instructive and interesting because combines notions of physics, spatial geometry and basic astronomy elements. Next day the activities took place in four stages: the students processed the experimental data obtained on first day (on sheets of millimetre paper they represented the length of the shadow alignments according the time), each team realised its own sun quadrant, point were given considering the design and functionality of these quadrant, the four teams had to mimic important constellations on carton boards with phosphorescent sticky stars and the students, accompanied by the professors took a hiking trip to the surroundings, marking the interest point coordinates, using a GPS to establish the geographical coronations and at the end of the day the students realised a small map of central Marisel area based on the GPS data. On the third day, the students were introduced to basic notions of radio astronomy, the principal categories of artificial Earth satellites: low orbit satellites (LEO), Medium orbit satellites (MEO) and geostationary satellites (GEO

  5. [Generation continuity and integration].

    Science.gov (United States)

    Zakhvatkin, Iu A

    2008-01-01

    Transformation of the cyclic morphoprocesses in Protista toward the terminal-cyclic morphoprocesses in Metazoa had lead to integration of the fomer's life circles into the latter's ontogenesis and began to supply the newly emerging ecosystems with the regular income of mortomasses. According to the palintomic hypothesis of A.A. Zakhvatkin, it was the egg that became a means of the metazoan generation continuity, and not the half set of organells acquired by descendants of a divided maternal cell in Protozoa. Origin of Metazoa and of their ontogenesis was accomplished by hypetrophic distomy and subsequent palintomic division of the protist parental cell, these processes being comparable to the ovogenesis and ovocyte division in the Metazoa. Division process in the most primitive metazoans, Leptolida and Calcarea, retained certains features of its palintomic nature that are clear in the Ctenophora, the latter though specific being most similar in this respect to the spongs and not to the Coelenterata whith whom they were united in the same phylum formerly. The ovogenesis perfection controlled by the maternal organism and leading to an increment of the nuclear-plasmic tension due to enrichment of egg with the yolk, promoted the embrionization of development and formation of the egg morphogenetic environment providing for the earlier formation processes without participation of the parental recombined genotypes. With all this, far earlier appearence of symmetry elements of definitive forms is embriogenesis along the ascending trend from the lower Metazoa to the most advanced insects. The unordered correspondence of the polarity axis of egg and the oral-aboral axis of blastula-like larva (1) is replaced by protaxony (2) in which these axes coincide, all formation processes reaching their perfection in the homoquadrant spiral division of annelids, which became a means of ovoplasma segregation. Afterward, a herequadrant division and plagioxony are developed in the course

  6. NEXT GENERATION TURBINE PROGRAM

    Energy Technology Data Exchange (ETDEWEB)

    William H. Day

    2002-05-03

    The Next Generation Turbine (NGT) Program's technological development focused on a study of the feasibility of turbine systems greater than 30 MW that offer improvement over the 1999 state-of-the-art systems. This program targeted goals of 50 percent turndown ratios, 15 percent reduction in generation cost/kW hour, improved service life, reduced emissions, 400 starts/year with 10 minutes to full load, and multiple fuel usage. Improvement in reliability, availability, and maintainability (RAM), while reducing operations, maintenance, and capital costs by 15 percent, was pursued. This program builds on the extensive low emissions stationary gas turbine work being carried out by Pratt & Whitney (P&W) for P&W Power Systems (PWPS), which is a company under the auspices of the United Technologies Corporation (UTC). This study was part of the overall Department of Energy (DOE) NGT Program that extends out to the year 2008. A follow-on plan for further full-scale component hardware testing is conceptualized for years 2002 through 2008 to insure a smooth and efficient transition to the marketplace for advanced turbine design and cycle technology. This program teamed the National Energy Technology Laboratory (NETL), P&W, United Technologies Research Center (UTRC), kraftWork Systems Inc., a subcontractor on-site at UTRC, and Multiphase Power and Processing Technologies (MPPT), an off-site subcontractor. Under the auspices of the NGT Program, a series of analyses were performed to identify the NGT engine system's ability to serve multiple uses. The majority were in conjunction with a coal-fired plant, or used coal as the system fuel. Identified also was the ability of the NGT system to serve as the basis of an advanced performance cycle: the humid air turbine (HAT) cycle. The HAT cycle is also used with coal gasification in an integrated cycle HAT (IGHAT). The NGT systems identified were: (1) Feedwater heating retrofit to an existing coal-fired steam plant, which

  7. Next Generation Wind Turbine

    Energy Technology Data Exchange (ETDEWEB)

    Cheraghi, S. Hossein [Western New England Univ., Springfield, MA (United States); Madden, Frank [FloDesign Wind Turbine Corp., Waltham, MA (United States)

    2012-09-01

    The goal of this collaborative effort between Western New England University's College of Engineering and FloDesign Wind Turbine (FDWT) Corporation to wok on a novel areodynamic concept that could potentially lead to the next generation of wind turbines. Analytical studies and early scale model tests of FDWT's Mixer/Ejector Wind Turbine (MEWT) concept, which exploits jet-age advanced fluid dynamics, indicate that the concept has the potential to significantly reduce the cost of electricity over conventional Horizontal Axis Wind Turbines while reducing land usage. This project involved the design, fabrication, and wind tunnel testing of components of MEWT to provide the research and engineering data necessary to validate the design iterations and optimize system performance. Based on these tests, a scale model prototype called Briza was designed, fabricated, installed and tested on a portable tower to investigate and improve the design system in real world conditions. The results of these scale prototype efforts were very promising and have contributed significantly to FDWT's ongoing development of a product scale wind turbine for deployment in multiple locations around the U.S. This research was mutually beneficial to Western New England University, FDWT, and the DOE by utilizing over 30 student interns and a number of faculty in all efforts. It brought real-world wind turbine experience into the classroom to further enhance the Green Engineering Program at WNEU. It also provided on-the-job training to many students, improving their future employment opportunities, while also providing valuable information to further advance FDWT's mixer-ejector wind turbine technology, creating opportunities for future project innovation and job creation.

  8. Next generation information systems

    Energy Technology Data Exchange (ETDEWEB)

    Limback, Nathan P [Los Alamos National Laboratory; Medina, Melanie A [Los Alamos National Laboratory; Silva, Michelle E [Los Alamos National Laboratory

    2010-01-01

    The Information Systems Analysis and Development (ISAD) Team of the Safeguards Systems Group at Los Alamos National Laboratory (LANL) has been developing web based information and knowledge management systems for sixteen years. Our vision is to rapidly and cost effectively provide knowledge management solutions in the form of interactive information systems that help customers organize, archive, post and retrieve nonproliferation and safeguards knowledge and information vital to their success. The team has developed several comprehensive information systems that assist users in the betterment and growth of their organizations and programs. Through our information systems, users are able to streamline operations, increase productivity, and share and access information from diverse geographic locations. The ISAD team is also producing interactive visual models. Interactive visual models provide many benefits to customers beyond the scope of traditional full-scale modeling. We have the ability to simulate a vision that a customer may propose, without the time constraints of traditional engineering modeling tools. Our interactive visual models can be used to access specialized training areas, controlled areas, and highly radioactive areas, as well as review site-specific training for complex facilities, and asset management. Like the information systems that the ISAD team develops, these models can be shared and accessed from any location with access to the internet. The purpose of this paper is to elaborate on the capabilities of information systems and interactive visual models as well as consider the possibility of combining the two capabilities to provide the next generation of infonnation systems. The collection, processing, and integration of data in new ways can contribute to the security of the nation by providing indicators and information for timely action to decrease the traditional and new nuclear threats. Modeling and simulation tied to comprehensive

  9. The different generation of nuclear reactors from Generation-1 to Generation-4

    International Nuclear Information System (INIS)

    Cognet, G.

    2010-01-01

    In this work author deals with the history of the development of nuclear reactors from Generation-1 to Generation-4. The fuel cycle and radioactive waste management as well as major accidents are presented, too.

  10. Generation 4 and the Nea

    International Nuclear Information System (INIS)

    Dujardin, T.

    2002-01-01

    In the previous edition of NEA News, W. D. Magwood of the US Department of Energy (DOE) outlined the future of nuclear energy in the context of the new US national energy policy. He cited the Generation IV initiative as a mechanism to implement a longer-term aspect of this policy. Although initiated in the US, the Generation IV initiative has quickly become an international effort and today ten countries are participating in the Generation IV International Forum (GIF). This article briefly reviews the context of Generation IV and describes NEA involvement in the Generation IV process. (author)

  11. Generative Contexts: Generating value between community and educational settings

    Directory of Open Access Journals (Sweden)

    Dan Lyles

    2016-12-01

    Full Text Available As educators and researchers, the authors of this paper participated, at different points in time, in a National Science Foundation funded research program to place culturally responsive education into generative justice frameworks. We discovered that the mechanisms to create generative contexts—contexts where value can possibly be returned to the community where the people generating that value live and work—in-school, after-school, and not-school were not uniform and required individual attention and care. One can think of generative contexts as the educational preconditions for generative justice. We aim to show how generative contexts are crucial to understanding a larger theory of generative justice. To do this we provide three examples of generative contexts. First is a generative context in-school, where a technology teacher brought a community hairstylist into her classroom to help teach computer programming through cornrow braiding; a skill relevant to her African American students. Next is a generative context after-school where a student demonstrates soldering skills that she learned from family members. The third is a not-school “E-Waste to Makerspace” workshop where students created garden-technology designs for low-income communities. 

  12. New generation "nanohybrid supercapacitor".

    Science.gov (United States)

    Naoi, Katsuhiko; Naoi, Wako; Aoyagi, Shintaro; Miyamoto, Jun-Ichi; Kamino, Takeo

    2013-05-21

    80 mAh g(-1) at an extremely high rate of 1200 C. Using this ultrafast material, we assembled a hybrid device called a "nanohybrid capacitor" that consists of a Faradaic Li-intercalating LTO electrode and a non-Faradaic AC electrode employing an anion (typically BF4(-)) adsorption-desorption process. The "nanohybrid capacitor" cell has demonstrated remarkable energy, power, and cycleability performance as an electrochemical capacitor electrode. It also exhibits the same ion adsorption-desorption process rates as those of standard activated carbon electrodes in electrochemical capacitors. The new-generation "nanohybrid capacitor" technology produced more than triple the energy density of a conventional electrochemical capacitor. Moreover, the synthetic simplicity of the high-performance nanostructures makes it possible to scale them up for large-volume material production and further applications in many other electrochemical energy storage devices.

  13. Solar thermal electricity generation

    Science.gov (United States)

    Gasemagha, Khairy Ramadan

    1993-01-01

    This report presents the results of modeling the thermal performance and economic feasibility of large (utility scale) and small solar thermal power plants for electricity generation. A number of solar concepts for power systems applications have been investigated. Each concept has been analyzed over a range of plant power ratings from 1 MW(sub e) to 300 MW(sub e) and over a range of capacity factors from a no-storage case (capacity factor of about 0.25 to 0.30) up to intermediate load capacity factors in the range of 0.46 to 0.60. The solar plant's economic viability is investigated by examining the effect of various parameters on the plant costs (both capital and O & M) and the levelized energy costs (LEC). The cost components are reported in six categories: collectors, energy transport, energy storage, energy conversion, balance of plant, and indirect/contingency costs. Concentrator and receiver costs are included in the collector category. Thermal and electric energy transport costs are included in the energy transport category. Costs for the thermal or electric storage are included in the energy storage category; energy conversion costs are included in the energy conversion category. The balance of plant cost category comprises the structures, land, service facilities, power conditioning, instrumentation and controls, and spare part costs. The indirect/contingency category consists of the indirect construction and the contingency costs. The concepts included in the study are (1) molten salt cavity central receiver with salt storage (PFCR/R-C-Salt); (2) molten salt external central receiver with salt storage (PFCR/R-E-Salt); (3) sodium external central receiver with sodium storage (PFCR/RE-Na); (4) sodium external central receiver with salt storage (PFCR/R-E-Na/Salt); (5) water/steam external central receiver with oil/rock storage (PFCR/R-E-W/S); (6) parabolic dish with stirling engine conversion and lead acid battery storage (PFDR/SLAB); (7) parabolic dish

  14. Development of a control system for evaluation of renewable power plants in the water pumping; Desenvolvimento de um sistema de controle para avaliacao de fontes de energias renovaveis no bombeamento de agua

    Energy Technology Data Exchange (ETDEWEB)

    Presenco, Jose Fernando [Universidade Estadual Paulista (FCA/UNESP), Botucatu, SP (Brazil). Fac. de Ciencias Agronomicas. Pos-graduacao em Agronomia; Seraphim, Odivaldo Jose [Universidade Estadual Paulista (FCA/UNESP), Botucatu, SP (Brazil). Fac. de Ciencias Agronomicas. Dept. de Engenharia Rural

    2010-07-01

    The use of alternative energy systems in the current days is an urgent necessity due to the problems that the planet is facing as the heating and loss of ozone layer. The scarcity of conventional energy is another problem that must be solved for the future of humanity. It must be considered that the people are inhabiting places moved away not always with available energy. The application of technologies as automation and control can help us to solve this problem. Therefore, this work aimed at apply an equipment of industrial usage, the Programmable Logical Controller, PLC, in alternative energies systems, as eolic generation and photovoltaic generation used for water pumping, aiming the automatic control and the efficiency in the places where it has simultaneous availability of these sources, based in criterion of priority that previously established itself between them. It was made a hydraulic and energetic evaluation of the energy system, eolic and photovoltaic, used in the automatic control system of pumping, in the place of accomplishment of the experiment, according to previously established physical conditions. The results have shown that the control system using the PLC is practicable and has trustworthiness. The program developed can be adapted for the use with several power plants in a specific application place. The photovoltaic system of pumping, using a polycrystalline of 70 Watts connected to a pump Shurflo 8000, showed to be efficient with significant flows in almost all the months. The eolic system of pumping, using an eolic generator of 400 Watts assembled in place of experiment, did not demonstrate energetic capacity for use in this specific type of application. (author)

  15. Evaluation of multiple scan average dose (MSAD) levels in computerized tomography in Minas Gerais state, Brazil; Avaliacao dos niveis de dose media em cortes multiplos (MSAD) em tomografia computadorizada no estado de Minas Gerais

    Energy Technology Data Exchange (ETDEWEB)

    Alonso, Thessa C., E-mail: alonso@cdtn.br [Centro de Desenvolvimento de Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil); Vieira, Leandro de A.; Barbosa, Nayra V.; Oliveira, Jeyselaine R. de; Cesar, Adriana C.Z. [Secretaria de Vigilancia Sanitaria de Minas Gerais, Belo Horizonte, MG (Brazil); Silva, Teogenes A. da [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Departamento de Engenharia Nuclear. Programa de Ciencias e Tecnicas Nucleares

    2014-07-01

    Computed Tomography (CT) grows every year and is a diagnostic method that has revolutionized radiology with advances in procedures for obtaining image. However, the indiscriminate use of this method generates relatively high doses in patients. The diagnostic reference levels (DRLs) is a practical tool to promote the evaluation of existing protocols. The optimization and the periodic review of the protocols are important to balance the risk of radiation. The present study aims to conduct a survey of levels of MSAD of Minas Gerais following the procedures recommended by current Brazilian law. (author)

  16. Evaluation of the social and economical impacts related to the large scale production of bioethanol in Brazil; Avaliacao dos impactos socioeconomicos relacionados a producao em larga escala do bioetanol no Brasil

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-10-15

    The social and economical impacts related to the large scale bio ethanol production have been evaluated considering the replacement of 10% of gasoline equivalent consumption in the world forecasting for the year 2025, evaluating the impacts not only in the sectors directly involved (bio ethanol and sugar cane production), but also taking into account the effects on all production chain of the economy (direct, indirect and induced effects). For this analysis, an income-product model was developed allowing to simulate production gains during the agricultural phase, and to combine different technologies for the production of bio ethanol, for quantification the impacts of the forwarding the second generation technology.

  17. Alternative energy and distributed generation: thinking generations ahead

    International Nuclear Information System (INIS)

    Hunt, P.D.

    2001-01-01

    Alternative Energy will be discussed in the context of Distributed Generation, which is defined as a delivery platform for micro-power generation, close to the end-users, that can also supplement regional electricity grids. Many references in the paper pertain to Alberta. This is for two reasons: First, familiarity by the author, and more importantly, Alberta is the first region in Canada that has de-regulated it's electricity sector. De-regulation allows independent and smaller power generators to enter the market. Focussing on Alberta, with some references to other Canadian provinces and USA, electricity consumption trends will be reviewed and the pressures to decentralize electricity generation discussed. Re-structuring of the electricity sector, convergence of power generation and natural gas industries, advances in technologies, and environmental concerns are collectively contributing to the creation of a new business called 'Distributed Generation'. Efficiency benefits of combined heat and power associated with the more prominent emerging distributed generation technologies like micro-turbines and fuel cells, will be highlighted. Areas of research, development and demonstration that will enable the successful deployment of Distributed Generation will be suggested with respect to Generation Technologies, Systems Controls, Supporting Infrastructure, and Socio-Political Barriers. Estimates of investments in the various alternative energy technologies will be presented. Using current trends and emerging technologies the Paper will conclude with some predictions of future scenarios. (author)

  18. Electricity cogeneration evaluation from cane bagasse in gasifier systems/gas turbine; Avaliacao da cogeracao de eletricidade a partir de bagaco de cana em sistemas de gaseificador/turbina a gas

    Energy Technology Data Exchange (ETDEWEB)

    Coelho, Suani Teixeira

    1992-07-01

    Before the beginning of PROALCOOL in 1975, the first effective program in the world using biomass in large scale as an automotive fuel, sugar/alcohol industries already used sugar cane bagasse - a by-product of sugar/alcohol production - to generate energy for sugar production. Currently, besides the fact that they are self-sufficient in thermal/electrical energy, sugar/alcohol industries produce small electricity excess which is exported to local utilities. Gasifier/gas turbine systems are more advanced technologies which are being developed and shall be commercialized in eight to ten years approximately, presenting much higher efficiency, at low cost and inducing more exportable electricity. In this study, possibilities of gasifier/gas turbine systems are evaluated and projections of bagasse based electricity production are presented, until year 2010, for Sao Paulo state and Brazil. Generation costs of gasified bagasse based electricity are calculated: they shall be lower than electricity cost from fossil origin. Influence of electricity sale on the reduction of alcohol production cost are also evaluated for several opportunity costs of bagasse. Environmental and social impacts are analyzed, including evaluation of the cost of avoided carbon, related to the substitution of fossil fuel by sugar cane bagasse in thermoelectric power plants. (author)

  19. Model for energy planning of degraded river basins based on hydrological evaluation of hydroelectric reservoirs in operation; Modelo de planejamento energetico de bacias hidrograficas degradadas baseado na avaliacao hidrica de reservatorios hidreletricos em operacao

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Afonso Henriques Moreira [Universidade Federal de Itajuba (UNIFEI), MG (Brazil); Ferreira, Aloisio Caetano; Ottoni, Arthur Benedicto; Nogueira Neto, Claudio; Silva, Denis de Souza

    2008-07-01

    The human occupation of the hydrographic basin, made in the past without plans, generated alteration of the hydrology characteristics, presenting as direct consequence modifications of its hydric availabilities. Or either, the floods in the rainy periods and the droughts in the ones of dryness currently tend to be more frequent and with bigger intensity. These conditions have affected the operation as well as the planning of the hydroelectric reservoirs, that have generated energy in conditions of different hydric availabilities (worse) of those foreseeing at the time of the project. These situations result in uncertainties and energy losses for the investor as well as in the system. Under such premises, the present article analyzes the energy-economic influences of the deterioration of the hydric regimen of some on exploitations in operation to the system, located in basins degrades in the South, Southeastern and Northeast regions; enhancing the importance of the studies of hydric economy of these units of management (degraded basins) as subsidy of taking of decision for gradual recovery of its hydric availabilities; taking in account the energy optimization of the hydroelectric reservoirs in located operation as well as the minimization of inherent the financial losses to the uncertainties of its hydric resources. (author)

  20. Hydrogen Generation From Electrolysis

    Energy Technology Data Exchange (ETDEWEB)

    Steven Cohen; Stephen Porter; Oscar Chow; David Henderson

    2009-03-06

    today that perform in a range of efficiencies, >95%, that are suitable for the overall operational goals. The balance of plant scales well both operationally and in terms of cost becoming a smaller portion of the overall cost equation as the systems get larger. Capital cost reduction of the cell stack power supplies is achievable by modifying the system configuration to have the cell stacks in electrical series driving up the DC bus voltage, thereby allowing the use of large-scale DC power supply technologies. The single power supply approach reduces cost. Elements of the cell stack cost reduction and efficiency improvement work performed in the early stage of the program is being continued in subsequent DOE sponsored programs and through internal investment by Proton. The results of the trade study of the 100 kg H2/day system have established a conceptual platform for design and development of a next generation electrolyzer for Proton. The advancements started by this program have the possibility of being realized in systems for the developing fueling markets in 2010 period.

  1. The Next Generation Photoinjector

    Energy Technology Data Exchange (ETDEWEB)

    Palmer, Dennis Thomas; /Stanford U., Appl. Phys. Dept.

    2005-09-12

    This dissertation will elucidate the design, construction, theory, and operation of the Next Generation Photoinjector (NGP). This photoinjector is comprised of the BNL/SLAC/UCLA 1.6 cell symmetrized S-band photocathode radio frequency (rf) electron gun and a single emittance-compensation solenoidal magnet. This photoinjector is a prototype for the Linear Coherent Light Source X-ray Free Electron Laser operating in the 1.5 {angstrom} range. Simulations indicate that this photoinjector is capable of producing a 1nC electron bunch with transverse normalized emittance less than 1 {pi} mm mrad were the cathode is illuminated with a 10 psec longitudinal flat top pulse. Using a Gaussian longitudinal laser profile with a full width half maximum (FWHM) of 10 psec, simulation indicates that the NGP is capable of producing a normalized rms emittance of 2.50 {pi} mm mrad at 1 nC. Using the removable cathode plate we have studied the quantum efficiency (QE) of both copper and magnesium photo-cathodes. The Cu QE was found to be 4.5 x 10{sup -5} with a 25% variation in the QE across the emitting surface of the cathode, while supporting a field gradient of 125 MV/m. At low charge, the transverse normalized rms emittance, {epsilon}{sub n,rms}, produced by the NGP is {epsilon}{sub n,rms} = 1.2 {pi} mm mrad for Q{sub T} = 0.3 nC. The 95% electron beam bunch length was measured to 10.9 psec. The emittance due to the finite magnetic field at the cathode has been studied. The scaling of this magnetic emittance term as a function of cathode magnetic field was found to be 0.01 {pi} mm mrad per Gauss. The 1.6 cell rf gun has been designed to reduce the dipole field asymmetry of the longitudinal accelerating field. Low level rf measurements show that this has in fact been accomplished, with an order of magnitude decrease in the dipole field. High power beam studies also show that the dipole field has been decreased. An upper limit of the intrinsic non-reducible thermal emittance of a

  2. Evaluation of '9{sup 9}Mo presence in eluates of {sup 99}mTc used in nuclear medicine; Avaliacao da presenca de {sup 99}Mo em eluatos de {sup 99m}Tc utilizados em medicina nuclear

    Energy Technology Data Exchange (ETDEWEB)

    Ribeiro, Bianca da Silva

    2010-07-01

    Tc-99m is used for diagnostic imaging in nuclear medicine through SPECT technique. It is obtained by the elution of {sup 99}Mo/{sup 99m}Tc generators. During the elution process {sup 99}Mo can be extracted becoming a radionuclidic impurity. One of the quality parameters of the eluate is the radionuclidic purity, MBT (molybdenum break through), defined as the ratio between {sup 99}Mo and {sup 99m}Tc activities in the eluate. The North-American and European pharmacopoeias restrict the {sup 99}Mo content, respectively, in 0.015 e 0.1% and, according to the International Atomic Energy Agency (IAEA), the activity ratio at the moment of administration of the radiopharmaceutical to the patient, should not exceed 0.015%. In Brazil, the control of such parameter is not obliged in official regulations. Thus, the objective of this work is to evaluate the occurrence of {sup 99}Mo in {sup 99m}Tc eluates. It was initially optimized a methodology to determine the activity of {sup 99}Mo in eluate samples. Efficiency curves were obtained for a NaI (Tl) 8'' x 4'' scintillation detector installed at the In Vivo Monitoring Laboratory (LABMIV-IRD). The methodology has been validated through the measurement of a {sup 99}Mo standard liquid source calibrated at the National Metrology Laboratory for Ionizing Radiation (LNMRI-IRD). The samples analyzed in this work were gently supplied by 5 Nuclear Medicine Clinics located in the city of Rio de Janeiro. The activities of {sup 99}mTc and {sup 99}Mo in those samples have been measured respectively at the clinics and at the LABMIV. By applying a standardized methodology, the ration between the activities were calculated. The results show that 147 out of 174 samples presented {sup 99}Mo activities above the minimum detectable activity of the technique. On the other hand, only 2 out of 147 samples surpassed the MBT limit suggested by the IAEA and have been detected in samples eluted from generators of 750 mCi. In one of the

  3. Micro thrust and heat generator

    Science.gov (United States)

    Garcia, E.J.

    1998-11-17

    A micro thrust and heat generator have a means for providing a combustion fuel source to an ignition chamber of the micro thrust and heat generator. The fuel is ignited by a ignition means within the micro thrust and heat generator`s ignition chamber where it burns and creates a pressure. A nozzle formed from the combustion chamber extends outward from the combustion chamber and tappers down to a narrow diameter and then opens into a wider diameter where the nozzle then terminates outside of said combustion chamber. The pressure created within the combustion chamber accelerates as it leaves the chamber through the nozzle resulting in pressure and heat escaping from the nozzle to the atmosphere outside the micro thrust and heat generator. The micro thrust and heat generator can be microfabricated from a variety of materials, e.g., of polysilicon, on one wafer using surface micromachining batch fabrication techniques or high aspect ratio micromachining techniques (LIGA). 30 figs.

  4. Highly Reconfigurable Beamformer Stimulus Generator

    Directory of Open Access Journals (Sweden)

    Vaviļina E.

    2018-02-01

    Full Text Available The present paper proposes a highly reconfigurable beamformer stimulus generator of radar antenna array, which includes three main blocks: settings of antenna array, settings of objects (signal sources and a beamforming simulator. Following from the configuration of antenna array and object settings, different stimulus can be generated as the input signal for a beamformer. This stimulus generator is developed under a greater concept with two utterly independent paths where one is the stimulus generator and the other is the hardware beamformer. Both paths can be complemented in final and in intermediate steps as well to check and improve system performance. This way the technology development process is promoted by making each of the future hardware steps more substantive. Stimulus generator configuration capabilities and test results are presented proving the application of the stimulus generator for FPGA based beamforming unit development and tuning as an alternative to an actual antenna system.

  5. Highly Reconfigurable Beamformer Stimulus Generator

    Science.gov (United States)

    Vaviļina, E.; Gaigals, G.

    2018-02-01

    The present paper proposes a highly reconfigurable beamformer stimulus generator of radar antenna array, which includes three main blocks: settings of antenna array, settings of objects (signal sources) and a beamforming simulator. Following from the configuration of antenna array and object settings, different stimulus can be generated as the input signal for a beamformer. This stimulus generator is developed under a greater concept with two utterly independent paths where one is the stimulus generator and the other is the hardware beamformer. Both paths can be complemented in final and in intermediate steps as well to check and improve system performance. This way the technology development process is promoted by making each of the future hardware steps more substantive. Stimulus generator configuration capabilities and test results are presented proving the application of the stimulus generator for FPGA based beamforming unit development and tuning as an alternative to an actual antenna system.

  6. Thermoelectric coolers as power generators

    International Nuclear Information System (INIS)

    Burke, E.J.; Buist, R.J.

    1984-01-01

    There are many applications where thermoelectric (TE) coolers can be used effectively as power generators. The literature available on this subject is scarce and very limited in scope. This paper describes the configuration, capability, limitations and performance of TE coolers to be used as power generators. Also presented are performance curves enabling the user to design the optimum TE module for any given power generation application

  7. High-voltage pulse generator

    International Nuclear Information System (INIS)

    Roche, M.

    1991-01-01

    This generator is composed of elementary impulsion generators connected in series. Each of them have -storage capacities, and switchs. The closure of switch causes an accumulator discharge. -control means of these switches are electrically independent and forecast to switch on by pulses in the same time -loading means of storage means have a very low enough electric dependence not to induce a loss of power at the exit of the generator. Applications to particle accelerators [fr

  8. Heat and electricity generating methods

    International Nuclear Information System (INIS)

    Buter, J.

    1977-01-01

    A short synopsis on the actual methods of heating of lodgings and of industrial heat generation is given. Electricity can be generated in steam cycles heated by burning of fossil fuels or by nuclear energy. A valuable contribution to the electricity economy is produced in the hydroelectric power plants. Besides these classical methods, also the different procedures of direct electricity generation are treated: thermoelectric, thermionic, magnetohydrodynamic power sources, solar and fuel cells. (orig.) [de

  9. Event generators in particle physics

    International Nuclear Information System (INIS)

    Sjostrand, Torbjorn

    1994-01-01

    This presentation gives an introduction to the topic of event generators in particle physics . The emphasis is on the physics aspects that have to be considered in the construction of a generator, and what lessons we have learned from comparisons with data. A brief survey of existing generators is also included. As illustration, a few topics of current interest are covered in a bit more detail: QCD uncertainties in W mass determinations and γp/γγ physics. (author)

  10. Algorithm for programming function generators

    International Nuclear Information System (INIS)

    Bozoki, E.

    1981-01-01

    The present paper deals with a mathematical problem, encountered when driving a fully programmable μ-processor controlled function generator. An algorithm is presented to approximate a desired function by a set of straight segments in such a way that additional restrictions (hardware imposed) are also satisfied. A computer program which incorporates this algorithm and automatically generates the necessary input for the function generator for a broad class of desired functions is also described

  11. Power generation, operation and control

    CERN Document Server

    Wood, Allen J; Sheblé, Gerald B

    2013-01-01

    Since publication of the second edition, there have been extensive changes in the algorithms, methods, and assumptions in energy management systems that analyze and control power generation. This edition is updated to acquaint electrical engineering students and professionals with current power generation systems. Algorithms and methods for solving integrated economic, network, and generating system analysis are provided. Also included are the state-of-the-art topics undergoing evolutionary change, including market simulation, multiple market analysis, multiple interchange contract analysis, c

  12. [Intel random number generator-based true random number generator].

    Science.gov (United States)

    Huang, Feng; Shen, Hong

    2004-09-01

    To establish a true random number generator on the basis of certain Intel chips. The random numbers were acquired by programming using Microsoft Visual C++ 6.0 via register reading from the random number generator (RNG) unit of an Intel 815 chipset-based computer with Intel Security Driver (ISD). We tested the generator with 500 random numbers in NIST FIPS 140-1 and X(2) R-Squared test, and the result showed that the random number it generated satisfied the demand of independence and uniform distribution. We also compared the random numbers generated by Intel RNG-based true random number generator and those from the random number table statistically, by using the same amount of 7500 random numbers in the same value domain, which showed that the SD, SE and CV of Intel RNG-based random number generator were less than those of the random number table. The result of u test of two CVs revealed no significant difference between the two methods. Intel RNG-based random number generator can produce high-quality random numbers with good independence and uniform distribution, and solves some problems with random number table in acquisition of the random numbers.

  13. A high-voltage pulse generator for corona plasma generation

    NARCIS (Netherlands)

    Yan, K.; Heesch, van E.J.M.; Pemen, A.J.M.; Huijbrechts, P.A.H.J.; Gompel, van F.M.; Leuken, van H.E.M.; Matyas, Z.

    2002-01-01

    This paper discusses a high-voltage pulse generator for producing corona plasma. The generator consists of three resonant charging circuits, a transmission line transformer, and a triggered spark-gap switch. Voltage pulses in the order of 30-100 kV with a rise time of 10-20 ns, a pulse duration of

  14. Fast generation of computer-generated holograms using wavelet shrinkage.

    Science.gov (United States)

    Shimobaba, Tomoyoshi; Ito, Tomoyoshi

    2017-01-09

    Computer-generated holograms (CGHs) are generated by superimposing complex amplitudes emitted from a number of object points. However, this superposition process remains very time-consuming even when using the latest computers. We propose a fast calculation algorithm for CGHs that uses a wavelet shrinkage method, eliminating small wavelet coefficient values to express approximated complex amplitudes using only a few representative wavelet coefficients.

  15. Generation by Generation Correlation and Path Analysis for Yield ...

    African Journals Online (AJOL)

    Six advanced generations (F7 - F12) of tomato hybrids were evaluated in the Department of Crop Science Research Farm, University of Nigeria, Nsukka from 2004 to 2008 to estimate the magnitude of character association of yield and yield related attributes in each filial generation. Traits under focus were days to flowering, ...

  16. Young generation actions in Finland

    International Nuclear Information System (INIS)

    Tanskanen, A.

    2000-01-01

    The Finnish Young Generation was established in 1998 as a working group of the Finnish Nuclear Society to tackle the declining of the nuclear expertise. The objectives of the Young Generation are to attract more young students to the nuclear field, motivate and train young employees, enhance the transfer of knowledge between the generations, and to enable the young students and employees in nuclear field to build a personal network of contacts. This paper summarizes the results of the Finnish Young Generation program. (orig.)

  17. Generative electronic background music system

    Energy Technology Data Exchange (ETDEWEB)

    Mazurowski, Lukasz [Faculty of Computer Science, West Pomeranian University of Technology in Szczecin, Zolnierska Street 49, Szczecin, PL (Poland)

    2015-03-10

    In this short paper-extended abstract the new approach to generation of electronic background music has been presented. The Generative Electronic Background Music System (GEBMS) has been located between other related approaches within the musical algorithm positioning framework proposed by Woller et al. The music composition process is performed by a number of mini-models parameterized by further described properties. The mini-models generate fragments of musical patterns used in output composition. Musical pattern and output generation are controlled by container for the mini-models - a host-model. General mechanism has been presented including the example of the synthesized output compositions.

  18. Alternative solutions for electricity generation

    International Nuclear Information System (INIS)

    Kuenstle, K.

    1976-01-01

    Ten illustrations - mainly comparitive ones - dealing with the possibilities of an economical energy conversion, in particular electricity generation, in the FRG are explained and commented upon. (UA) [de

  19. Submersible Generator for Marine Hydrokinetics

    Energy Technology Data Exchange (ETDEWEB)

    Cinq-Mars, Robert S; Burke, Timothy; Irish, James; Gustafson, Brian; Kirtley, James; Alawa, Aiman

    2011-09-01

    A submersible generator was designed as a distinct and critical subassembly of marine hydrokinetics systems, specifically tidal and stream energy conversion. The generator is designed to work with both vertical and horizontal axis turbines. The final product is a high-pole-count, radial-flux, permanent magnet, rim mounted generator, initially rated at twenty kilowatts in a two-meter-per-second flow, and designed to leverage established and simple manufacturing processes. The generator was designed to work with a 3 meter by 7 meter Gorlov Helical Turbine or a marine hydrokinetic version of the FloDesign wind turbine. The team consisted of experienced motor/generator design engineers with cooperation from major US component suppliers (magnetics, coil winding and electrical steel laminations). Support for this effort was provided by Lucid Energy Technologies and FloDesign, Inc. The following tasks were completed: Identified the conditions and requirements for MHK generators. Defined a methodology for sizing and rating MHK systems. Selected an MHK generator topology and form factor. Completed electromechanical design of submersible generator capable of coupling to multiple turbine styles. Investigated MHK generator manufacturing requirements. Reviewed cost implications and financial viability. Completed final reporting and deliverables

  20. Advanced technologies on steam generators

    Energy Technology Data Exchange (ETDEWEB)

    Sakata, Kaoru; Nakamura, Yuuki [Mitsubishi Heavy Industry Co., Takasago (Japan); Nakamori, Nobuo; Mizutani, Toshiyuki; Uwagawa, Seiichi; Saito, Itaru [Mitsubishi Heavy Industry Co., Kobe (Japan); Matsuoka, Tsuyoshi [Mitsubishi Heavy Industry Co., Yokohama (Japan)

    1997-12-31

    The thermal-hydraulic tests for a horizontal steam generator of a next-generation PWR (New PWR-21) were performed. The purpose of these tests is to understand the thermal-hydraulic behavior in the secondary side of horizontal steam generator during the plant normal operation. A test was carried out with cross section slice model simulated the straight tube region. In this paper, the results of the test is reported, and the effect of the horizontal steam generator internals on the thermalhydraulic behavior of the secondary side and the circulation characteristics of the secondary side are discussed. (orig.). 3 refs.

  1. Semantic attributes based texture generation

    Science.gov (United States)

    Chi, Huifang; Gan, Yanhai; Qi, Lin; Dong, Junyu; Madessa, Amanuel Hirpa

    2018-04-01

    Semantic attributes are commonly used for texture description. They can be used to describe the information of a texture, such as patterns, textons, distributions, brightness, and so on. Generally speaking, semantic attributes are more concrete descriptors than perceptual features. Therefore, it is practical to generate texture images from semantic attributes. In this paper, we propose to generate high-quality texture images from semantic attributes. Over the last two decades, several works have been done on texture synthesis and generation. Most of them focusing on example-based texture synthesis and procedural texture generation. Semantic attributes based texture generation still deserves more devotion. Gan et al. proposed a useful joint model for perception driven texture generation. However, perceptual features are nonobjective spatial statistics used by humans to distinguish different textures in pre-attentive situations. To give more describing information about texture appearance, semantic attributes which are more in line with human description habits are desired. In this paper, we use sigmoid cross entropy loss in an auxiliary model to provide enough information for a generator. Consequently, the discriminator is released from the relatively intractable mission of figuring out the joint distribution of condition vectors and samples. To demonstrate the validity of our method, we compare our method to Gan et al.'s method on generating textures by designing experiments on PTD and DTD. All experimental results show that our model can generate textures from semantic attributes.

  2. Steam 80 steam generator instrumentation

    International Nuclear Information System (INIS)

    Carson, W.H.; Harris, H.H.

    1980-01-01

    This paper describes two special instrumentation packages in an integral economizer (preheater) steam generator of one of the first System 80 plants scheduled to go into commercial operation. The purpose of the instrumentation is to obtain accurate operating information from regions of the secondary side of the steam generator inaccessible to normal plant instrumentation. In addition to verification of the System 80 steam generator design predictions, the data obtained will assist in verification of steam generator thermal/hydraulic computer codes developed for generic use in the industry

  3. Pulse-voltage fast generator

    International Nuclear Information System (INIS)

    Valeev, R.I.; Nikiforov, M.G.; Kharchenko, A.F.

    1988-01-01

    The design is described and the test results of a four-channel pulse-voltage generator with maximum output voltage 200 kV are presented. The measurement results of generator triggering time depending on the value and polarity of the triggering voltage pulse for different triggering circuits are presented. The tests have shown stable triggering of all four channels of the generator in the range up to 40 % from selfbreakdown voltage. The generator triggering delay in the given range is <25 ns, asynchronism in channel triggering is <±1 ns

  4. Advanced technologies on steam generators

    Energy Technology Data Exchange (ETDEWEB)

    Sakata, Kaoru; Nakamura, Yuuki [Mitsubishi Heavy Industry Co., Takasago (Japan); Nakamori, Nobuo; Mizutani, Toshiyuki; Uwagawa, Seiichi; Saito, Itaru [Mitsubishi Heavy Industry Co., Kobe (Japan); Matsuoka, Tsuyoshi [Mitsubishi Heavy Industry Co., Yokohama (Japan)

    1998-12-31

    The thermal-hydraulic tests for a horizontal steam generator of a next-generation PWR (New PWR-21) were performed. The purpose of these tests is to understand the thermal-hydraulic behavior in the secondary side of horizontal steam generator during the plant normal operation. A test was carried out with cross section slice model simulated the straight tube region. In this paper, the results of the test is reported, and the effect of the horizontal steam generator internals on the thermalhydraulic behavior of the secondary side and the circulation characteristics of the secondary side are discussed. (orig.). 3 refs.

  5. Large superconducting wind turbine generators

    DEFF Research Database (Denmark)

    Abrahamsen, Asger Bech; Magnusson, Niklas; Jensen, Bogi Bech

    2012-01-01

    and the rotation speed is lowered in order to limit the tip speed of the blades. The ability of superconducting materials to carry high current densities with very small losses might facilitate a new class of generators operating with an air gap flux density considerably higher than conventional generators...... and thereby having a smaller size and weight [1, 2]. A 5 MW superconducting wind turbine generator forms the basics for the feasibility considerations, particularly for the YBCO and MgB2 superconductors entering the commercial market. Initial results indicate that a 5 MW generator with an active weight of 34...

  6. Generative electronic background music system

    International Nuclear Information System (INIS)

    Mazurowski, Lukasz

    2015-01-01

    In this short paper-extended abstract the new approach to generation of electronic background music has been presented. The Generative Electronic Background Music System (GEBMS) has been located between other related approaches within the musical algorithm positioning framework proposed by Woller et al. The music composition process is performed by a number of mini-models parameterized by further described properties. The mini-models generate fragments of musical patterns used in output composition. Musical pattern and output generation are controlled by container for the mini-models - a host-model. General mechanism has been presented including the example of the synthesized output compositions

  7. Evaluation of the potentiality of the use of high-carbon microsilica as a pozzolanic material; Avaliacao da potencialidade da utilizacao de microssilica de alto teor de carbono como material pozolanico

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, R.L.S.; Pederneiras, C.M.; Costa, T.C.S.; Silva, C.H.R.B., E-mail: ruan_landolfo@hotmail.com [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil); Anjos, M.A.S. [Instituto Federal da Paraiba (IFPB), PB (Brazil); Nobrega, A.K. [Universidade Federal Rural do Semi-Arido (UFERSA), Mossoro, RN (Brazil)

    2016-07-01

    Supplementary Cementitious Materials reduce the production of clinker, which minimizes the environmental impact of cement production and the generation of industrial waste, also improve mechanical behavior and durability. Thus, this article aims to evaluate the potential use of microsilica with high content of carbon as pozzolanic material, based on the requirements of ISO 12653 (ABNT, 2015). The techniques of X-ray fluorescence (XRF), X-ray diffraction (XRD) and compressive strength of mortar of lime and cement (at 7 and 28 days, respectively) were used to evaluate the pozzolanic of the microsilica as a mineral addition. The results indicated that the microsilica has a high amorphous silicon dioxide percentage structure. In the DRX could be possible to analyze the formation of CSH, justifying the good results of mechanical strength, especially with cement. Thus, the mineral admixture used in this research can be considered as a pozzolanic material. (author)

  8. Evaluation of ensemble atmospheric simulations in oil dispersion models at Itaguai Port region; Avaliacao do uso de resultados numericos de previsao atmosferica por conjunto na modelagem da dispersao de oleo na regiao do Porto de Itaguai

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Renato Goncalves dos; Silva, Mariana P.R.; Silva, Ricardo Marcelo da; Torres Junior, Audalio R. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Lab. de Modelagem de Processos Marinhos e Atmosfericos (LAMMA); Landau, Luiz [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Lab. de Metodos Computacinais em Engenharia (LAMCE); Sa, Reginaldo Ventura de; Hochleitner, Fabio; Correa, Eduardo Barbosa [AQUAMET Meteorologia e Projeto de Sistemas, Rio de Janeiro, RJ (Brazil)

    2008-07-01

    This work discusses the use of numerical prediction using ensemble as boundary condition in pollutants dispersion models, applied in a hypothetical case of an oil spill occurrence in Itaguai Port. The Princeton Ocean Model (POM) has been used to simulate hydrodynamics and NICOIL Eulerian model to forecast oil spill dispersion, and ensemble wind forecast from Global Forecast System (GFS), aiming to assess the importance of this parameter variability in oil dispersion at sea. The wind scenarios using ensemble members has showed significant dispersion when compared to control simulation, demonstrating that the uncertainty in the atmospheric modeling can generate considerable variations in the placement of the final spot of oil. The region of interest was the Sepetiba Bay, located on the southern coast of the Rio de Janeiro state; because of port operations carried out around the Port of Itaguai where they can, eventually, oil leaks occur. (author)

  9. Study of the heterogeneity effects of lung in the evaluation of absorbed dose in radiotherapy; Estudo dos efeitos da heterogeneidade de pulmao na avaliacao da dose absorvida em radioterapia

    Energy Technology Data Exchange (ETDEWEB)

    Campos, Luciana Tourinho

    2006-02-15

    The main objective of radiotherapy is to deliver the highest possible dose to the tumour, in order to destroy it, reducing as much as possible the doses to healthy tissues adjacent to the target volume. Therefore, it is necessary to do a planning of the treatment. The more complex is the treatment, the more difficult the planning will be, demanding computation sophisticated methods in its execution, in order to consider the heterogeneities present in the human body. Additionally, with the appearing of new radiotherapeutic techniques, that used irradiation fields of small area, for instance, the intensity modulated radiotherapy, the difficulties for the execution of a reliable treatment planning, became still larger. In this work it was studied the influence of the lung heterogeneity in the planning of the curves of percentage depth dose, PDP, obtained with the Eclipse{sup R} planning system for different sizes of irradiation fields, using the correction algorithms for heterogeneities available in the planning system: modified Batho, general Batho and equivalent tissue-air ratio. A thorax phantom, manufactured in acrylic, containing a region made of cork to simulate the lung tissue, was used. The PDP curves generated by the planning system were compared to those obtained by Monte Carlo simulation and with the use of thermoluminescent, TL, dosimetry. It was verified that the algorithms used by the Eclipse{sup R} system for the correction of heterogeneity effects are not able to generate correct results for PDP curves in the case of small fields, occurring differences of up to 100%, when the 1x1 cm{sup 2} treatment field is considered. These differences can cause a considerable subdosage in the lung tissue, reducing the possibility of the patient cure. (author)

  10. Next generation of weather generators on web service framework

    Science.gov (United States)

    Chinnachodteeranun, R.; Hung, N. D.; Honda, K.; Ines, A. V. M.

    2016-12-01

    Weather generator is a statistical model that synthesizes possible realization of long-term historical weather in future. It generates several tens to hundreds of realizations stochastically based on statistical analysis. Realization is essential information as a crop modeling's input for simulating crop growth and yield. Moreover, they can be contributed to analyzing uncertainty of weather to crop development stage and to decision support system on e.g. water management and fertilizer management. Performing crop modeling requires multidisciplinary skills which limit the usage of weather generator only in a research group who developed it as well as a barrier for newcomers. To improve the procedures of performing weather generators as well as the methodology to acquire the realization in a standard way, we implemented a framework for providing weather generators as web services, which support service interoperability. Legacy weather generator programs were wrapped in the web service framework. The service interfaces were implemented based on an international standard that was Sensor Observation Service (SOS) defined by Open Geospatial Consortium (OGC). Clients can request realizations generated by the model through SOS Web service. Hierarchical data preparation processes required for weather generator are also implemented as web services and seamlessly wired. Analysts and applications can invoke services over a network easily. The services facilitate the development of agricultural applications and also reduce the workload of analysts on iterative data preparation and handle legacy weather generator program. This architectural design and implementation can be a prototype for constructing further services on top of interoperable sensor network system. This framework opens an opportunity for other sectors such as application developers and scientists in other fields to utilize weather generators.

  11. Solar thermal aided power generation

    International Nuclear Information System (INIS)

    Hu, Eric; Yang, YongPing; Nishimura, Akira; Yilmaz, Ferdi; Kouzani, Abbas

    2010-01-01

    Fossil fuel based power generation is and will still be the back bone of our world economy, albeit such form of power generation significantly contributes to global CO 2 emissions. Solar energy is a clean, environmental friendly energy source for power generation, however solar photovoltaic electricity generation is not practical for large commercial scales due to its cost and high-tech nature. Solar thermal is another way to use solar energy to generate power. Many attempts to establish solar (solo) thermal power stations have been practiced all over the world. Although there are some advantages in solo solar thermal power systems, the efficiencies and costs of these systems are not so attractive. Alternately by modifying, if possible, the existing coal-fired power stations to generate green sustainable power, a much more efficient means of power generation can be reached. This paper presents the concept of solar aided power generation in conventional coal-fired power stations, i.e., integrating solar (thermal) energy into conventional fossil fuelled power generation cycles (termed as solar aided thermal power). The solar aided power generation (SAPG) concept has technically been derived to use the strong points of the two technologies (traditional regenerative Rankine cycle with relatively higher efficiency and solar heating at relatively low temperature range). The SAPG does not only contribute to increase the efficiencies of the conventional power station and reduce its emission of the greenhouse gases, but also provides a better way to use solar heat to generate the power. This paper presents the advantages of the SAPG at conceptual level.

  12. Future generations and business ethics

    NARCIS (Netherlands)

    Keijzers, G.; Jeurissen, R.J.M.

    2004-01-01

    Companies have a share in our common responsibility to future generations. Hitherto, this responsibility has been all but neglected in the business ethics literature. This paper intends to make up for that omission. A strong case for our moral responsibility to future generations can be established

  13. The Always-Connected Generation

    Science.gov (United States)

    Bull, Glen

    2010-01-01

    The Pew Internet and American Life project characterizes the millennials--the first generation to come of age in the new millennium--as the first "always-connected" generation. Significant aspects of culture are changing as a result. A changing world where all students are connected all the time has substantial educational implications. Despite…

  14. Distributed power generation using microturbines

    CSIR Research Space (South Africa)

    Szewczuk, S

    2008-11-01

    Full Text Available At present, the bulk of the world is electricity is generated in central power stations. This approach, one of `economy of size generates electricity in large power stations and delivers it to load centres via an extensive network of transmission...

  15. Improving Precision of Generated ASTs

    DEFF Research Database (Denmark)

    Winther, Johnni

    The parser-generator is an essential tool in grammarware and its output, the parse tree in form of the concrete or abstract syntax tree, often forms the basis for the whole structure of the grammarware application. Several tools for Java encode the parse tree in a class hierarchy generated to model...

  16. Pulsed neutron generator for logging

    International Nuclear Information System (INIS)

    Thibideau, F.D.

    1977-01-01

    A pulsed neutron generator for uranium logging is described. This generator is one component of a prototype uranium logging probe which is being developed by SLA to detect, and assay, uranium by borehole logging. The logging method is based on the measurement of epithermal neutrons resulting from the prompt fissioning of uranium from a pulsed source of 17.6 MeV neutrons. An objective of the prototype probe was that its diameter not exceed 2.75 inches, which would allow its use in conventional rotary drill holes of 4.75-inch diameter. This restriction limited the generator to a maximum 2.375-inch diameter. The performance requirements for the neutron generator specified that it operate with a nominal output of 5 x 10 6 neutrons/pulse at up to 100 pulses/second for a one-hour period. The development of a neutron generator meeting the preliminary design goals was completed and two prototype models were delivered to SLA. These two generators have been used by SLA to log a number of boreholes in field evaluation of the probe. The results of the field evaluations have led to the recommendation of several changes to improve the probe's operation. Some of these changes will require additional development effort on the neutron generator. It is expected that this work will be performed during 1977. The design and operation of the first prototype neutron generators is described

  17. Wave Generation in Physical Models

    DEFF Research Database (Denmark)

    Andersen, Thomas Lykke; Frigaard, Peter

    The present book describes the most important aspects of wave generation techniques in physical models. Moreover, the book serves as technical documentation for the wave generation software AwaSys 6, cf. Aalborg University (2012). In addition to the two main authors also Tue Hald and Michael...

  18. Neutron generation in lightning bolts

    International Nuclear Information System (INIS)

    Shah, G.N.; Razdan, H.; Bhat, C.L.; Ali, Q.M.

    1985-01-01

    To ascertain neutron generation in lightning bolts, the authors have searched for neutrons from individual lightning strokes, for a time-interval comparable with the duration of the lightning stroke. 10 7 -10 10 neutrons per stroke were found, thus providing the first experimental evidence that neutrons are generated in lightning discharges. (U.K.)

  19. Object grammars and random generation

    Directory of Open Access Journals (Sweden)

    I. Dutour

    1998-12-01

    Full Text Available This paper presents a new systematic approach for the uniform random generation of combinatorial objects. The method is based on the notion of object grammars which give recursive descriptions of objects and generalize context-freegrammars. The application of particular valuations to these grammars leads to enumeration and random generation of objects according to non algebraic parameters.

  20. Web Tools: The Second Generation

    Science.gov (United States)

    Pascopella, Angela

    2008-01-01

    Web 2.0 tools and technologies, or second generation tools, help districts to save time and money, and eliminate the need to transfer or move files back and forth across computers. Many Web 2.0 tools help students think critically and solve problems, which falls under the 21st-century skills. The second-generation tools are growing in popularity…

  1. Communicating with the Net Generation

    Science.gov (United States)

    2011-03-11

    resource investment is necessary to sustain a high quality all-volunteer force. 9 Leadership Technique for the Net Generation Army Regulation 600...Generations at Work, Millenials at Work, http://www.generationsatwork. com /articles_millennials_at_work.php (accessed November 21, 2010). 31 Thomas

  2. Guiding New Product Idea Generation

    Science.gov (United States)

    Park, Y.

    2003-01-01

    The creation of innovative ideas is the initial step in entrepreneurial practice and venture management. As the management of technology is now on the priority agenda of higher education institutions, there is a need to develop pedagogic schemes for idea generation. Despite its importance, the idea generation process is hard to systematize or to…

  3. Steam generator life cycle management: Ontario Power Generation (OPG) experience

    International Nuclear Information System (INIS)

    Maruska, C.C.

    2002-01-01

    A systematic managed process for steam generators has been implemented at Ontario Power Generation (OPG) nuclear stations for the past several years. One of the key requirements of this managed process is to have in place long range Steam Generator Life Cycle Management (SG LCM) plans for each unit. The primary goal of these plans is to maximize the value of the nuclear facility through safe and reliable steam generator operation over the expected life of the units. The SG LCM plans integrate and schedule all steam generator actions such as inspection, operation, maintenance, modifications, repairs, assessments, R and D, performance monitoring and feedback. This paper discusses OPG steam generator life cycle management experience to date, including successes, failures and how lessons learned have been re-applied. The discussion includes relevant examples from each of the operating stations: Pickering B and Darlington. It also includes some of the experience and lessons learned from the activities carried out to refurbish the steam generators at Pickering A after several years in long term lay-up. The paper is structured along the various degradation modes that have been observed to date at these sites, including monitoring and mitigating actions taken and future plans. (author)

  4. Knowing Generation Y: a new generation of nurses in practice.

    Science.gov (United States)

    Chung, Stephanie M

    Generation Y is commonly defined as those people born between 1980 and 2000, now aged in their 20s and 30s. Their grandparents experienced post-World War II reconstruction, their parents the economic boom of the 1980s. There are currently 81 million individuals in the Generation Y cohort in the USA, making it the second-largest, and possibly most influential, cohort since World War II (Manion, 2009). Members of Generation Y are diverse, technologically advanced and vocal about their opinions. They tend to resist traditional hierarchy, want recognition/reward for achievements and distrust institutions. Knowing these characteristics is useful for nurse managers, preceptors and team members working with members of Generation Y. Studies have proven that Generation Y is challenging the nursing workforce through rapid turnover (Cogin, 2012). This article explores a theoretical model that predicts retention and/or turnover of nurses in light of Generation Y behaviours and motivators-for example, moving from agency to agency rather than devoting many years to a single practice. Further research is needed to find out whether these behaviours and motivators are unique to Generation Y alone.

  5. Generation Y Online Buying Patterns

    Directory of Open Access Journals (Sweden)

    Katija Vojvodić

    2015-12-01

    Full Text Available The advantages of electronic retailing can, among other things, result in uncontrolled buying by online consumers, i.e. in extreme buying behavior. The main purpose of this paper is to analyze and determine the buying patterns of Generation Y online consumers in order to explore the existence of different types of behavior based on the characteristics of online buying. The paper also aims at exploring the relationship between extracted factors and Generation Y consumers’ buying intentions. Empirical research was conducted on a sample of 515 consumers in the Dubrovnik-Neretva County. Based on the factor analysis, research results indicate that Generation Y online consumers are influenced by three factors: compulsivity, impulsivity, and functionality. The analysis of variance reveals that significant differences exist between the extracted factors and Generation Y’s online buying characteristics. In addition, correlation analysis shows a statistically significant correlation between the extracted factors and Generation Y’s buying intentions.

  6. A compact mobile neutron generator

    International Nuclear Information System (INIS)

    Zhou Changgeng; Li Yan; Hu Yonghong; Lou Benchao; Wu Chunlei

    2007-06-01

    Through fitting the high voltage terminal from introducing overseas and pulse system et al. from oneself developing together, a compact mobile neutron generator is established. The length and weight of this neutron generator are 2 500 mm and less than 1 t, respectively. It can be expediently moved to the location which is required by experimental people. It is consisted of RF ion source, acceleration tube, high voltage generator, focus device, microsecond pulse system, gas leak system, control system, vacuum system and experimental target. It can produce 150 μA continuous deuterium ion beam current, also can produce the pulse deuterium ion beam current. The pulse widths are 10-100 μs and frequencies 10 Hz, 1 000 Hz, 10 000 Hz. The D-T neutron yields of the neutron generator may arrive 1.5 x 10 10 s -1 . The working principle and the structure of the main parts of this neutron generator are described. (authors)

  7. Steam generator reliability improvement project

    International Nuclear Information System (INIS)

    Blomgren, J.C.; Green, S.J.

    1987-01-01

    Upon successful completion of its research and development technology transfer program, the Electric Power Research Institute's Steam Generator Owners Group (SGOG II) will disband in December 1986 and be replaced in January 1987 by a successor project, the Steam Generator Reliability Project (SGRP). The new project, funded in the EPRI base program, will continue the emphasis on reliability and life extension that was carried forward by SGOG II. The objectives of SGOG II have been met. Causes and remedies have been identified for tubing corrosion problems, such as stress corrosion cracking and pitting, and steam generator technology has been improved in areas such as tube wear prediction and nondestructive evaluation (NDE). These actions have led to improved reliability of steam generators. Now the owners want to continue with a centrally managed program that builds on what has been learned. The goal is to continue to improve steam generator reliability and solve small problems before they become large problems

  8. Steam generator reliability improvement project

    International Nuclear Information System (INIS)

    Blomgren, J.C.; Green, S.J.

    1987-01-01

    Upon successful completion of its research and development technology transfer program, the Electric Power Research Institute's (EPRI's) Steam Generator Owners Group (SGOG II) will disband in December 1986, and be replaced in January 1987, by a successor project, the Steam Generator Reliability Project (SGRP). The new project, funded in the EPRI base program, will continue to emphasize reliability and life extension, which were carried forward by SGOG II. The objectives of SGOG II have been met. Causes and remedies have been identified for tubing corrosion problems such as stress corrosion cracking and pitting, and steam generator technology has been improved in areas such as tube wear prediction and nondestructive evaluation. These actions have led to improved reliability of steam generators. Now the owners want to continue with a centrally managed program that builds on what has been learned. The goal is to continue to improve steam generator reliability and to solve small problems before they become large problems

  9. Steam generator tube integrity program

    International Nuclear Information System (INIS)

    Dierks, D.R.; Shack, W.J.; Muscara, J.

    1996-01-01

    A new research program on steam generator tubing degradation is being sponsored by the U.S. Nuclear Regulatory Commission (NRC) at Argonne National Laboratory. This program is intended to support a performance-based steam generator tube integrity rule. Critical areas addressed by the program include evaluation of the processes used for the in-service inspection of steam generator tubes and recommendations for improving the reliability and accuracy of inspections; validation and improvement of correlations for evaluating integrity and leakage of degraded steam generator tubes, and validation and improvement of correlations and models for predicting degradation in steam generator tubes as aging occurs. The studies will focus on mill-annealed Alloy 600 tubing, however, tests will also be performed on replacement materials such as thermally-treated Alloy 600 or 690. An overview of the technical work planned for the program is given

  10. Renewable energies for power generation

    International Nuclear Information System (INIS)

    Freris, L.; Infield, D.

    2009-01-01

    Power generation from renewable energy sources is different from power generation from classical energies (nuclear, thermal..). Therefore, the integration into the grid of the electricity supplied by renewable sources requires a deep thinking. The reason is that these power sources are controlled by variable elements, like wind, water and sun, which condition production. This book deals with the following aspects in detail: characteristics of classical and intermittent generators; grid balancing between supply and demand; conversion methods of renewable energies into electricity; power systems; privatizing of power generation and birth of new markets, in particular the 'green' power market; development of renewable energies thanks to technical advances. It gives a comprehensive overview of the present day available renewable energy sources for power generation. (J.S.)

  11. Performance evaluation of small scale internal combustion engine with mixtures for diesel oil-palm oil; Avaliacao do desempenho do motor de combustao interna de pequeno porte com misturas oleo diesel - oleo de dende

    Energy Technology Data Exchange (ETDEWEB)

    Seye, Omar; Souza, Rubem Cesar Rodrigues [Universidade Federal do Amazonas (CDEAM/UFAM), Manaus, AM (Brazil). Centro de Desenvolvimento Energetico Amazonico], Emails: Seye62omar@yahoo.com, rcsouza@internext.com.br

    2006-07-01

    This work aims at the performance evaluation of the Cummins 4B -3.9, an internal combustion engine of maximum power 75 hp (56.6 kW) for small scale power generation, burning different mixtures of diesel fuel and palm oil. The palm oil in nature is mixed manually, what unfortunately will influence the engine performance as it hinders the combustion. The test protocol will include the biodiesel, later on. The emissions were assessed for several proportions of mixture diesel/palm oil covering the strip from 0 to 20% and the results were compared to the engine performance when it operates with diesel only. The motor is coupled to a dynamometer, whose operation consists of the acceleration and deceleration of water in order to simulate the effect of a load being applied to the motor. The system is controlled by the software LT commander that allows the start up and the shutdown of the engine from the screen of the computer that also monitors the following parameters as speed of rotation of the motor (RPM), applied torque (N-m), potency (hp), temperature of the lubricating oil, temperature of the water in the entrance and exit of the motor, and temperature of the environment (deg C), pressures of the lubricating oil and of opening of the injector (mBar). While a flow meter coupled to the piping measures the consumption of fuel, the gas analyzer ECHO Line 6000 it monitors the concentration and temperature of carbon monoxide (CO) (ppm), nitric oxide (NO) (ppm), nitrogen dioxide (NO{sub 2}), (ppm), sulfur dioxide (SO{sub 2}) (ppm) and Oxygen (O{sub 2}) (%) in the exhaust gases. This equipment also determines the combustion parameters as excess of air and the efficiency. The technical results present the efficiency variation, the pressure of the fuel, monoxide carbon, NOx emissions, Oxygen content in the exhaust gases, for the different mixture proportions. Furthermore, the results of economic viability show generation cost values of US$ 135,66/MWh for the motor operating

  12. Distributed generation - customer owned generation - Duke Energy case study

    Energy Technology Data Exchange (ETDEWEB)

    Iung, Anderson M. [Duke Energy International, Geracao Paranapanema S.A., SP (Brazil). Market Analysis Dept.; Ribeiro, Paulo F. [Calvin College, Grand Rapids, MI (United States); Oliveira, A.R. [Centro Federal de Educacao Tecnologica de Minas Gerais (CEFET-MG), Belo Horizonte, MG (Brazil)

    2009-07-01

    Distributed generation (DG) is getting more attractive. Although unit costs show strong economies of scale for all generation technology types, there is a potential niche market for DG technology to drive growth in addition to environmental concern issues. Duke Energy encourages the installation of cost effective small scale costumer owned generation. The objective of this article is to evaluate some aspects of DG connection in the Duke's distribution system regarding power quality, voltage stability, system protection, power balance control policy and the economical viability. (author)

  13. Evaluation of the efficiency of a tubular digester in the reduction of organic load of biogas from swine wastes; Avaliacao da eficiencia de um biodigestor tubular na reducao da carga organica de biogas a partir de dejetos de suinos

    Energy Technology Data Exchange (ETDEWEB)

    Angonese, Andre Ricardo [Universidade Estadual do Oeste do Parana (UNIOESTE), PR (Brazil)], Email: aangonese@yahoo.com.br; Campos, Alessandro Torres [Universidade Federal dos Vales do Jequitinhonha e Mucuri (UFVJM), Diamantina, MG (Brazil)], Email: atcampos3@yahoo.com.br; Moreno Palacio, Soraya [Universidade Estadual de Maringa (UEM), PR (Brazil); Szymanski, Nayara [Universidade Estadual do Oeste do Parana (UNIOESTE), PR (Brazil). Curso de Quimica

    2006-07-01

    The purpose of this study was to assess the efficiency of the anaerobic biological treatment systems in the reduction and stabilization of biodegradable organic matter of swine waste. The experiment was carried out at Vale dos Ipes Farm, located in the city of Ouro Verde do Oeste, in the Western of Parana State. One finishing phase swine unity containing 600 animals was monitored from January to June 2005. The system is composed by one steel digester with capacity for 50 m{sup 3}. The swine barn cleaning is performed by dry scratching on a daily basis. The generated residues flow by gravitation through ducts towards the digester. The duration of the hydraulic retention period was 12 days. The residues analysis was performed by means of sampling at the entrance and way out of the digester. The following parameters were analyzed: pH, DBO{sub 5}, DQO, total solids, total volatile solids, total fixed solids, total nitrogen e ammonia, potassium, total phosphate, average of biogas production. The results suggested that the anaerobic biological treatment system was efficient for reducing and stabilizing the organic matter resulted from the swine wastes. Expressive reductions of DBO, DQO, ST and SVT of 76, 77, 43 and 59% respectively, were obtained for the effluent originated by the digester. The average daily production of biogas during the analyzed period was 31, 5 m{sup 3}. (author)

  14. Evaluation of toxicity and removal of color in textile effluent treated with electron beam; Avaliacao da toxicidade e remocao da cor de um efluente textil tratado com feixe de eletrons

    Energy Technology Data Exchange (ETDEWEB)

    Morais, Aline Viana de

    2015-07-01

    The textile industry is among the main activities Brazil, being relevant in number of jobs, quantity and diversity of products and mainly by the volume of water used in industrial processes and effluent generation. These effluents are complex mixtures which are characterized by the presence of dyes, surfactants, metal sequestering agents, salts and other potentially toxic chemicals for the aquatic biota. Considering the lack of adequate waste management to these treatments, new technologies are essential in highlighting the advanced oxidation processes such as ionizing radiation electron beam. This study includes the preparation of a standard textile effluent chemical laboratory and its treatment by electron beam from electron accelerator in order to reduce the toxicity and intense staining resulting from Cl. Blue 222 dye. The treatment caused a reduction in toxicity to exposed organisms with 34.55% efficiency for the Daphnia similis micro crustacean and 47.83% for Brachionus plicatilis rotifer at a dose of 2.5 kGy. The Vibrio fischeri bacteria obtained better results after treatment with a dose of 5 kGy showing 57.29% efficiency. Color reduction was greater than 90% at a dose of 2.5 kGy. This experiment has also carried out some preliminary tests on the sensitivity of the D. similis and V. fischeri organisms to exposure of some of the products used in this bleaching and dyeing and two water reuse simulations in new textile processing after the treating the effluent with electron beam. (author)

  15. Assessment of environmental impact models in natural occurring radionuclides solid wastes disposal from the mineral industry; Avaliacao de modelos de impacto ambiental para deposicao de residuos solidos com radionuclideos naturais em instalacoes minero-industriais

    Energy Technology Data Exchange (ETDEWEB)

    Pontedeiro, Elizabeth May Braga Dulley

    2006-07-15

    This work evaluates the behavior of wastes with naturally occurring radionuclides as generated by the mineral industry and their final disposal in landfills. An integrated methodology is used to predict the performance of an industrial landfill for disposal of wastes containing NORM/TENORM, and to define acceptable amounts that can be disposed at the landfill using long-term environmental assessment. The governing equations for radionuclide transport are solved analytically using the generalized integral transform technique. Results obtained for each compartment of the biogeosphere are validated with experimental results or compared to other classes of solutions. An impact analysis is performed in order to define the potential consequences of a landfill to the environment, considering not only the engineering characteristics of the waste deposit but also the exposure pathways and plausible scenarios in which the contaminants could migrate and reach the environment and the human population. The present work permits the development of a safety approach that can be used to derive quantitative waste acceptance criteria for the disposal of NORM/TENORM waste in landfills. (author)

  16. The use of dynamic computation systems in the evaluation of the damages caused by oil spill; O uso de sistemas computacionais dinamicos na avaliacao dos danos causados por derrames de petroleo

    Energy Technology Data Exchange (ETDEWEB)

    Barbosa, Luiz H.C.; Laurino, Luiz S.; Muelbert, Jose H. [Fundacao Universidade Federal do Rio Grande (FURG), RS (Brazil)

    2004-07-01

    Estuarine areas are zones of great environmental risk characterized as great sensitivity to oil and oil products spills. Traditionally, Geographic Information Systems (GIS) are used to evaluate these possible impacts. However, for some groups of organisms, like plankton, the spatial limitations of GIS become inadequate because their distributions exhibits temporal variability and are associated with dynamic environmental factors. Having this in mind, the development of a specific tool is necessary to supply this need. For the development of this tool, data of fish larvae and eggs (ichthyoplankton) from the Lagoa dos Patos Estuary (RS) were chosen as an initial group for the development of a Plankton Diagnostic System (SIDIPLA). These groups have an accentuated sensitivity to oil spills. This impact could directly affect the environment quality and indirectly the local fishing resource. SIDIPLA is elaborated from data reports covering every estuarine area and graphs are generated containing abundance of the species of fish larvae and eggs from the geographical position, season, temperature and salinity; selected by the user from an Internet page (http://corvina.lei.furg.br/sidipla). Several simulations demonstrated the strength of the system and its easy use. Furthermore this tool can be implemented in different places of the Brazilian coast and different groups of organisms. (author)

  17. Evaluation of different X ray equipment and incubators for pediatric radiographic images implementation;Avaliacao de diferentes equipamentos de raios-X e incubadoras para implementacao de imagens radiograficas pediatricas

    Energy Technology Data Exchange (ETDEWEB)

    Carbi, E.D.O.; Souza, R.T.F.; Pina, D.R. [UNESP, Botucatu, SP (Brazil). Faculdade de Medicina. Dept. de Doencas Tropicais e Diagnostico por Imagem

    2009-07-01

    The children frequent/y are exposed to the ionizing radiation and other emotional and physical risks in the attempts repeated to get radiographic images of quality. This study it has as objective to evaluate X ray beam about quality and intensity at three different equipment with single-phase generator of voltage and the absorption factors to 5 different incubators and 3 different cradles in the neonatal UTI of the Clinics Hospital on the Medicine College in Botucatu. The methodology consisted of carrying through measured of half Layer Value and Radiation output for the different X ray equipment with voltage with in between 45 and 100 kVp, applied at the X ray tube. The measures of the absorption factors had been carried through varying the thicknesses of attenuating material (phantom) for the different voltage value with in between 50 and 100kVp. The results had shown the same energy effective for the different X ray equipment and the same absorption factors for the different incubators and evaluated cradles, taking into account, the same thickness of attenuating material and same voltage. (author)

  18. Evaluation of the biogas potential using in the equipment utilized in milk production systems; Avaliacao do potencial do emprego do biogas nos equipamentos utilizados em sistemas de producao de leite

    Energy Technology Data Exchange (ETDEWEB)

    Hardoim, Paulo Cesar; Goncalves, Adriano Dicesar M.A. [Lavras Univ. Federal, MG (Brazil). Dept. de Engenharia

    2000-07-01

    The technology of the anaerobic digestion has been checked as one of the most efficient in the treatment of the dejection of bovine, however, the employment of the biogas as source of energy for the operation of the equipment still finds limitations of technological order. The present work evaluated, the great potential of the treatment anaerobic of the residues of bovine destined the production of milk as source energy renewably , inside of a concept of maintainable development and production rationalization without aggression to the Middle-Atmosphere. It also verified that technology is adapted as conservation strategy and efficient energy use. The employment of the anaerobic digestion in the treatment of the dejection is possible and desirable, once it contributes to preservation of the environment, it makes possible the modern confinement systems and it reduces the production cost. The residues of milk cows produced, can be used as resources of supplies, so much of energy as of fertilizer. In a confinement of 100 cows, a biodigester can produce a volume of 118 m{sup 3} of biogas. Volume this enough one to work a generating group of 15 kVa and this to assist with electric energy the demand of the milk installation and bomb of water. The total demand of biogas can working with these equipment is esteemed in 85,3m{sup 3} of biogas, what can be supplied with rest by the biodigester. (author)

  19. Performance evaluation of a fuel cell with NiO-YSV anode operating with natural gas; Avaliacao do desempenho de uma celula a combustivel com anodo de NiO YSZ operando com gas natural

    Energy Technology Data Exchange (ETDEWEB)

    Nobrega, Shayenne Diniz da; Vasconcelos, Carmel Suzarte Ayres; Lima, Luiz Rogerio Pinho de Andrade [Universidade Federal da Bahia (UFBa), Salvador, BA (Brazil). Escola Politecnica. Dept. de Ciencia e Tecnologia dos Materiais]. E-mail: shayennedn@yahoo.com.br

    2008-07-01

    Fuel cell is an electrochemical device that converts the chemical energy into electric energy. The natural gas, for its proven improvement in the income of the equipment in relation to other energy ones, has been very used to feed the solid oxide fuel cell (SOFC) in the generation of electric power. Ceramics of Yttria-stabilized zirconia had been used as electrolyte and when supported with nickel oxide they act as anode in the solid oxide fuel cell, due to raised ionic conductivity that these materials present in high temperatures, while lanthanum with strontium and manganite are used as cathode. In the composition of the anode, the concentration of Ni O, acting as catalytic in the YSZ confers high electric conductivity and high electrochemical activity of the reactions, providing the internal reform in the SOFC. In this work, the solid oxide fuel cell, formed by Yttria- stabilized zirconia, nickel oxide, and lanthanum with strontium and manganite were tested in the reform had been prepared samples of electrode/electrolyte for use in SOFC of the natural gas in the presence of low water text, similar condition to the operation of the SOFC, operating in temperatures range from 700 to 800 deg C. This cell also was characterized using the impedance spectroscopy technique. These results allowed the development of components of the current versus voltage. (author)

  20. Evaluation of Portland cement from X-ray diffraction associated with cluster analysis; Avaliacao de cimento Portland a partir da difracao de raios X associada a analise por agrupamento

    Energy Technology Data Exchange (ETDEWEB)

    Gobbo, Luciano de Andrade, E-mail: luciano.gobbo@panalytical.com [Panalytical Brasil, Sao Paulo, SP (Brazil); Montanheiro, Tarcisio Jose, E-mail: tarcisio.montanheiro@gmail.com [Instituto Geologico, Secretaria de Estado do Meio Ambiente, Sao Paulo, SP (Brazil); Montanheiro, Filipe, E-mail: flpmontanheiro@gmail.com [Universidade Estadual Paulista (LEBAC/UNESP), Rio Claro, SP (Brazil). Departamento de Geologia Aplicada. Lab. de Estudos de Bacias; Sant' Agostino, Lilia Mascarenhas, E-mail: agostino@usp.br [Universidade de Sao Paulo (USP), SP (Brazil). Instituto de Geociencias. Departamento de Geologia Sedimentar e Ambiental

    2013-12-15

    The Brazilian cement industry produced 64 million tons of cement in 2012, with noteworthy contribution of CP-II (slag), CP-III (blast furnace) and CP-IV (pozzolanic) cements. The industrial pole comprises about 80 factories that utilize raw materials of different origins and chemical compositions that require enhanced analytical technologies to optimize production in order to gain space in the growing consumer market in Brazil. This paper assesses the sensitivity of mineralogical analysis by X-ray diffraction associated with cluster analysis to distinguish different kinds of cements with different additions. This technique can be applied, for example, in the prospection of different types of limestone (calcitic, dolomitic and siliceous) as well as in the qualification of different clinkers. The cluster analysis does not require any specific knowledge of the mineralogical composition of the diffractograms to be clustered; rather, it is based on their similarity. The materials tested for addition have different origins: fly ashes from different power stations from South Brazil and slag from different steel plants in the Southeast. Cement with different additions of limestone and white Portland cement were also used. The Rietveld method of qualitative and quantitative analysis was used for measuring the results generated by the cluster analysis technique. (author)