WorldWideScience

Sample records for general purpose metric

  1. Generalized Painleve-Gullstrand metrics

    Energy Technology Data Exchange (ETDEWEB)

    Lin Chunyu [Department of Physics, National Cheng Kung University, Tainan 70101, Taiwan (China)], E-mail: l2891112@mail.ncku.edu.tw; Soo Chopin [Department of Physics, National Cheng Kung University, Tainan 70101, Taiwan (China)], E-mail: cpsoo@mail.ncku.edu.tw

    2009-02-02

    An obstruction to the implementation of spatially flat Painleve-Gullstrand (PG) slicings is demonstrated, and explicitly discussed for Reissner-Nordstroem and Schwarzschild-anti-deSitter spacetimes. Generalizations of PG slicings which are not spatially flat but which remain regular at the horizons are introduced. These metrics can be obtained from standard spherically symmetric metrics by physical Lorentz boosts. With these generalized PG metrics, problematic contributions to the imaginary part of the action in the Parikh-Wilczek derivation of Hawking radiation due to the obstruction can be avoided.

  2. Generalization of Vaidya's radiation metric

    Energy Technology Data Exchange (ETDEWEB)

    Gleiser, R J; Kozameh, C N [Universidad Nacional de Cordoba (Argentina). Instituto de Matematica, Astronomia y Fisica

    1981-11-01

    In this paper it is shown that if Vaidya's radiation metric is considered from the point of view of kinetic theory in general relativity, the corresponding phase space distribution function can be generalized in a particular way. The new family of spherically symmetric radiation metrics obtained contains Vaidya's as a limiting situation. The Einstein field equations are solved in a ''comoving'' coordinate system. Two arbitrary functions of a single variable are introduced in the process of solving these equations. Particular examples considered are a stationary solution, a nonvacuum solution depending on a single parameter, and several limiting situations.

  3. General relativity: An erfc metric

    Science.gov (United States)

    Plamondon, Réjean

    2018-06-01

    This paper proposes an erfc potential to incorporate in a symmetric metric. One key feature of this model is that it relies on the existence of an intrinsic physical constant σ, a star-specific proper length that scales all its surroundings. Based thereon, the new metric is used to study the space-time geometry of a static symmetric massive object, as seen from its interior. The analytical solutions to the Einstein equation are presented, highlighting the absence of singularities and discontinuities in such a model. The geodesics are derived in their second- and first-order differential formats. Recalling the slight impact of the new model on the classical general relativity tests in the solar system, a number of facts and open problems are briefly revisited on the basis of a heuristic definition of σ. A special attention is given to gravitational collapses and non-singular black holes.

  4. Generalized tolerance sensitivity and DEA metric sensitivity

    OpenAIRE

    Neralić, Luka; E. Wendell, Richard

    2015-01-01

    This paper considers the relationship between Tolerance sensitivity analysis in optimization and metric sensitivity analysis in Data Envelopment Analysis (DEA). Herein, we extend the results on the generalized Tolerance framework proposed by Wendell and Chen and show how this framework includes DEA metric sensitivity as a special case. Further, we note how recent results in Tolerance sensitivity suggest some possible extensions of the results in DEA metric sensitivity.

  5. Generalized tolerance sensitivity and DEA metric sensitivity

    Directory of Open Access Journals (Sweden)

    Luka Neralić

    2015-03-01

    Full Text Available This paper considers the relationship between Tolerance sensitivity analysis in optimization and metric sensitivity analysis in Data Envelopment Analysis (DEA. Herein, we extend the results on the generalized Tolerance framework proposed by Wendell and Chen and show how this framework includes DEA metric sensitivity as a special case. Further, we note how recent results in Tolerance sensitivity suggest some possible extensions of the results in DEA metric sensitivity.

  6. General Purpose (office) Network reorganisation

    CERN Multimedia

    IT Department

    2016-01-01

    On Saturday 27 August, the IT Department’s Communication Systems group will perform a major reorganisation of CERN’s General Purpose Network.   This reorganisation will cause network interruptions on Saturday 27 August (and possibly Sunday 28 August) and will be followed by a change to the IP addresses of connected systems that will come into effect on Monday 3 October. For further details and information about the actions you may need to take, please see: https://information-technology.web.cern.ch/news/general-purpose-office-network-reorganisation.

  7. General purpose programmable accelerator board

    Science.gov (United States)

    Robertson, Perry J.; Witzke, Edward L.

    2001-01-01

    A general purpose accelerator board and acceleration method comprising use of: one or more programmable logic devices; a plurality of memory blocks; bus interface for communicating data between the memory blocks and devices external to the board; and dynamic programming capabilities for providing logic to the programmable logic device to be executed on data in the memory blocks.

  8. About the possibility of a generalized metric

    International Nuclear Information System (INIS)

    Lukacs, B.; Ladik, J.

    1991-10-01

    The metric (the structure of the space-time) may be dependent on the properties of the object measuring it. The case of size dependence of the metric was examined. For this dependence the simplest possible form of the metric tensor has been constructed which fulfils the following requirements: there be two extremal characteristic scales; the metric be unique and the usual between them; the change be sudden in the neighbourhood of these scales; the size of the human body appear as a parameter (postulated on the basis of some philosophical arguments). Estimates have been made for the two extremal length scales according to existing observations. (author) 19 refs

  9. Accelerating particles in general relativity (stationary C-metric)

    International Nuclear Information System (INIS)

    Farhoosh, H.

    1979-01-01

    The purpose of this thesis is to study the physical and geometrical properties of uniformly accelerating particles in the general theory of relativity and it consists of four main parts. In the first part the structure of the Killing horizons in the static vacuum C-metric which represents the gravitational field of a uniformly accelerating Schwarzschild like particle (non-rotating and spherically symmetric) is studied. In the second part these results are generalized to include the effects of the rotation of the source. For small acceleration and small rotation this solution reveals the existance of three Killing horizons. Two the these horizons are the Schwarzschild and the Rindler surfaces which are mainly due to the mass and the acceleration of the particle, respectively. In part three the radial geodesic and non-geodesic motions in the static vacuum C-metric (non-rotating case) are investigated. The effect of the dragging of the inertial frame is also shown in this part. In part four the radiative behavior of the stationary charged C-metric representing the electro-gravitational field of a uniformly accelerating and rotating charged particle with magnetic monopole and the NUT-parameter are investigated. The physical quantities - the news function, mass loss, mass, charge and the multipole moments - are calculated. It is also shown in this part that the magnetic monopole in the presence of rotation and acceleration affects the electric charge

  10. General Purpose Heat Source Simulator

    Science.gov (United States)

    Emrich, Bill

    2008-01-01

    The General Purpose Heat Source (GPHS) simulator project is designed to replicate through the use of electrical heaters, the form, fit, and function of actual GPHS modules which generate heat through the radioactive decay of Pu238. The use of electrically heated modules rather than modules containing Pu238 facilitates the testing of spacecraft subsystems and systems without sacrificing the quantity and quality of the test data gathered. Previous GPHS activities are centered around developing robust heater designs with sizes and weights that closely matched those of actual Pu238 fueled GPHS blocks. These efforts were successful, although their maximum temperature capabilities were limited to around 850 C. New designs are being pursued which also replicate the sizes and weights of actual Pu238 fueled GPHS blocks but will allow operation up to 1100 C.

  11. Common fixed points for generalized contractive mappings in cone metric spaces

    Directory of Open Access Journals (Sweden)

    Hassen Aydi

    2012-06-01

    Full Text Available The purpose of this paper is to establish coincidence point and common fixed point results for four maps satisfying generalized weak contractions in cone metric spaces. Also, an example is given to illustrate our results.

  12. On a Theorem of Khan in a Generalized Metric Space

    Directory of Open Access Journals (Sweden)

    Jamshaid Ahmad

    2013-01-01

    Full Text Available Existence and uniqueness of fixed points are established for a mapping satisfying a contractive condition involving a rational expression on a generalized metric space. Several particular cases and applications as well as some illustrative examples are given.

  13. Quantum anomalies for generalized Euclidean Taub-NUT metrics

    International Nuclear Information System (INIS)

    Cotaescu, Ion I; Moroianu, Sergiu; Visinescu, Mihai

    2005-01-01

    The generalized Taub-NUT metrics exhibit in general gravitational anomalies. This is in contrast with the fact that the original Taub-NUT metric does not exhibit gravitational anomalies, which is a consequence of the fact that it admits Killing-Yano tensors forming Staeckel-Killing tensors as products. We have found that for axial anomalies, interpreted as the index of the Dirac operator, the presence of Killing-Yano tensors is irrelevant. In order to evaluate the axial anomalies, we compute the index of the Dirac operator with the APS boundary condition on balls and on annular domains. The result is an explicit number-theoretic quantity depending on the radii of the domain. This quantity is 0 for metrics close to the original Taub-NUT metric but it does not vanish in general

  14. Generalized metric formulation of double field theory on group manifolds

    International Nuclear Information System (INIS)

    Blumenhagen, Ralph; Bosque, Pascal du; Hassler, Falk; Lüst, Dieter

    2015-01-01

    We rewrite the recently derived cubic action of Double Field Theory on group manifolds http://dx.doi.org/10.1007/JHEP02(2015)001 in terms of a generalized metric and extrapolate it to all orders in the fields. For the resulting action, we derive the field equations and state them in terms of a generalized curvature scalar and a generalized Ricci tensor. Compared to the generalized metric formulation of DFT derived from tori, all these quantities receive additional contributions related to the non-trivial background. It is shown that the action is invariant under its generalized diffeomorphisms and 2D-diffeomorphisms. Imposing additional constraints relating the background and fluctuations around it, the precise relation between the proposed generalized metric formulation of DFT WZW and of original DFT from tori is clarified. Furthermore, we show how to relate DFT WZW of the WZW background with the flux formulation of original DFT.

  15. Generalized metric formulation of double field theory on group manifolds

    Energy Technology Data Exchange (ETDEWEB)

    Blumenhagen, Ralph [Max-Planck-Institut für Physik,Föhringer Ring 6, 80805 München (Germany); Bosque, Pascal du [Arnold-Sommerfeld-Center für Theoretische Physik,Department für Physik, Ludwig-Maximilians-Universität München,Theresienstraße 37, 80333 München (Germany); Hassler, Falk [Max-Planck-Institut für Physik,Föhringer Ring 6, 80805 München (Germany); Lüst, Dieter [Max-Planck-Institut für Physik,Föhringer Ring 6, 80805 München (Germany); Arnold-Sommerfeld-Center für Theoretische Physik,Department für Physik, Ludwig-Maximilians-Universität München,Theresienstraße 37, 80333 München (Germany); CERN, PH-TH,1211 Geneva 23 (Switzerland)

    2015-08-13

    We rewrite the recently derived cubic action of Double Field Theory on group manifolds http://dx.doi.org/10.1007/JHEP02(2015)001 in terms of a generalized metric and extrapolate it to all orders in the fields. For the resulting action, we derive the field equations and state them in terms of a generalized curvature scalar and a generalized Ricci tensor. Compared to the generalized metric formulation of DFT derived from tori, all these quantities receive additional contributions related to the non-trivial background. It is shown that the action is invariant under its generalized diffeomorphisms and 2D-diffeomorphisms. Imposing additional constraints relating the background and fluctuations around it, the precise relation between the proposed generalized metric formulation of DFT{sub WZW} and of original DFT from tori is clarified. Furthermore, we show how to relate DFT{sub WZW} of the WZW background with the flux formulation of original DFT.

  16. 10 CFR 205.350 - General purpose.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false General purpose. 205.350 Section 205.350 Energy DEPARTMENT OF ENERGY OIL ADMINISTRATIVE PROCEDURES AND SANCTIONS Electric Power System Permits and Reports....350 General purpose. The purpose of this rule is to establish a procedure for the Office of...

  17. 12 CFR 1703.31 - General purposes.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 7 2010-01-01 2010-01-01 false General purposes. 1703.31 Section 1703.31 Banks and Banking OFFICE OF FEDERAL HOUSING ENTERPRISE OVERSIGHT, DEPARTMENT OF HOUSING AND URBAN... Legal Proceedings in Which OFHEO Is Not a Named Party § 1703.31 General purposes. The purposes of this...

  18. 7 CFR 254.1 - General purpose.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 4 2010-01-01 2010-01-01 false General purpose. 254.1 Section 254.1 Agriculture... GENERAL REGULATIONS AND POLICIES-FOOD DISTRIBUTION ADMINISTRATION OF THE FOOD DISTRIBUTION PROGRAM FOR INDIAN HOUSEHOLDS IN OKLAHOMA § 254.1 General purpose. This part sets the requirement under which...

  19. 22 CFR 309.1 - General purpose.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 2 2010-04-01 2010-04-01 true General purpose. 309.1 Section 309.1 Foreign Relations PEACE CORPS DEBT COLLECTION General Provisions § 309.1 General purpose. This part prescribes the procedures to be used by the United States Peace Corps (Peace Corps) in the collection and/or disposal of non...

  20. Recursive form of general limited memory variable metric methods

    Czech Academy of Sciences Publication Activity Database

    Lukšan, Ladislav; Vlček, Jan

    2013-01-01

    Roč. 49, č. 2 (2013), s. 224-235 ISSN 0023-5954 Institutional support: RVO:67985807 Keywords : unconstrained optimization * large scale optimization * limited memory methods * variable metric updates * recursive matrix formulation * algorithms Subject RIV: BA - General Mathematics Impact factor: 0.563, year: 2013 http://dml.cz/handle/10338.dmlcz/143365

  1. The analysis of timing metrics for synchronisation purposes in OFDM systems

    NARCIS (Netherlands)

    Hoeksema, F.W.; Slump, Cornelis H.

    2006-01-01

    In joint timing and carrier o®set estimation algorithms for Time Division Duple- xing (TDD) OFDM systems, di®erent timing metrics are proposed to determine the beginning of a burst or symbol. In this contribution we present the di®erent timing metrics. Generally speaking, analysis is done by

  2. Development of a General Purpose Gamification Framework

    OpenAIRE

    Vea, Eivind

    2016-01-01

    This report describes the design and implementation of a general purpose gamification framework developed in JavaScript on the Metor platform. Gamification is described as the use of game elements in none-game contexts. The purpose is to encourage and change user behaviour. Examples of existing gamification use cases and frameworks are described. A demo game shows how a general purpose framework can be used.

  3. General purpose code for Monte Carlo simulations

    International Nuclear Information System (INIS)

    Wilcke, W.W.

    1983-01-01

    A general-purpose computer called MONTHY has been written to perform Monte Carlo simulations of physical systems. To achieve a high degree of flexibility the code is organized like a general purpose computer, operating on a vector describing the time dependent state of the system under simulation. The instruction set of the computer is defined by the user and is therefore adaptable to the particular problem studied. The organization of MONTHY allows iterative and conditional execution of operations

  4. Restrictive metric regularity and generalized differential calculus in Banach spaces

    Directory of Open Access Journals (Sweden)

    Bingwu Wang

    2004-10-01

    Full Text Available We consider nonlinear mappings f:X→Y between Banach spaces and study the notion of restrictive metric regularity of f around some point x¯, that is, metric regularity of f from X into the metric space E=f(X. Some sufficient as well as necessary and sufficient conditions for restrictive metric regularity are obtained, which particularly include an extension of the classical Lyusternik-Graves theorem in the case when f is strictly differentiable at x¯ but its strict derivative ∇f(x¯ is not surjective. We develop applications of the results obtained and some other techniques in variational analysis to generalized differential calculus involving normal cones to nonsmooth and nonconvex sets, coderivatives of set-valued mappings, as well as first-order and second-order subdifferentials of extended real-valued functions.

  5. General-purpose radiographic and fluoroscopic table

    International Nuclear Information System (INIS)

    Ishizaki, Noritaka

    1982-01-01

    A new series of diagnostic tables, Model DT-KEL, was developed for general-purpose radiographic and fluoroscopic systems. Through several investigations, the table was so constructed that the basic techniques be general radiography and GI examination, and other techniques be optionally added. The diagnostic tables involve the full series of the type for various purposes and are systematized with the surrounding equipment. A retractable mechanism of grids was adopted first for general use. The fine grids with a density of 57 lines per cm, which was adopted in KEL-2, reduced the X-ray doses by 16 percent. (author)

  6. General purpose computers in real time

    International Nuclear Information System (INIS)

    Biel, J.R.

    1989-01-01

    I see three main trends in the use of general purpose computers in real time. The first is more processing power. The second is the use of higher speed interconnects between computers (allowing more data to be delivered to the processors). The third is the use of larger programs running in the computers. Although there is still work that needs to be done, I believe that all indications are that the online need for general purpose computers should be available for the SCC and LHC machines. 2 figs

  7. Use of social media in health promotion: purposes, key performance indicators, and evaluation metrics.

    Science.gov (United States)

    Neiger, Brad L; Thackeray, Rosemary; Van Wagenen, Sarah A; Hanson, Carl L; West, Joshua H; Barnes, Michael D; Fagen, Michael C

    2012-03-01

    Despite the expanding use of social media, little has been published about its appropriate role in health promotion, and even less has been written about evaluation. The purpose of this article is threefold: (a) outline purposes for social media in health promotion, (b) identify potential key performance indicators associated with these purposes, and (c) propose evaluation metrics for social media related to the key performance indicators. Process evaluation is presented in this article as an overarching evaluation strategy for social media.

  8. Extended DBI massive gravity with generalized fiducial metric

    Science.gov (United States)

    Chullaphan, Tossaporn; Tannukij, Lunchakorn; Wongjun, Pitayuth

    2015-06-01

    We consider an extended model of DBI massive gravity by generalizing the fiducial metric to be an induced metric on the brane corresponding to a domain wall moving in five-dimensional Schwarzschild-Anti-de Sitter spacetime. The model admits all solutions of FLRW metric including flat, closed and open geometries while the original one does not. The background solutions can be divided into two branches namely self-accelerating branch and normal branch. For the self-accelerating branch, the graviton mass plays the role of cosmological constant to drive the late-time acceleration of the universe. It is found that the number degrees of freedom of gravitational sector is not correct similar to the original DBI massive gravity. There are only two propagating degrees of freedom from tensor modes. For normal branch, we restrict our attention to a particular class of the solutions which provides an accelerated expansion of the universe. It is found that the number of degrees of freedom in the model is correct. However, at least one of them is ghost degree of freedom which always present at small scale implying that the theory is not stable.

  9. Extended DBI massive gravity with generalized fiducial metric

    International Nuclear Information System (INIS)

    Chullaphan, Tossaporn; Tannukij, Lunchakorn; Wongjun, Pitayuth

    2015-01-01

    We consider an extended model of DBI massive gravity by generalizing the fiducial metric to be an induced metric on the brane corresponding to a domain wall moving in five-dimensional Schwarzschild-Anti-de Sitter spacetime. The model admits all solutions of FLRW metric including flat, closed and open geometries while the original one does not. The background solutions can be divided into two branches namely self-accelerating branch and normal branch. For the self-accelerating branch, the graviton mass plays the role of cosmological constant to drive the late-time acceleration of the universe. It is found that the number degrees of freedom of gravitational sector is not correct similar to the original DBI massive gravity. There are only two propagating degrees of freedom from tensor modes. For normal branch, we restrict our attention to a particular class of the solutions which provides an accelerated expansion of the universe. It is found that the number of degrees of freedom in the model is correct. However, at least one of them is ghost degree of freedom which always present at small scale implying that the theory is not stable.

  10. Indefinite-metric quantum field theory of general relativity, 5

    International Nuclear Information System (INIS)

    Nakanishi, Noboru

    1979-01-01

    The indefinite-metric quantum field theory of general relativity is extended to the coupled system of the gravitational field and a Dirac field on the basis of the vierbein formalism. The six extra degrees of freedom involved in vierbein are made unobservable by introducing an extra subsidiary condition Q sub(s) + phys> = 0, where Q sub(s) denotes a new BRS charge corresponding to the local Lorentz invariance. It is shown that a manifestly covariant, unitary, canonical theory can be constructed consistently on the basis of the vierbein formalism. (author)

  11. Generalized Friedmann-Robertson-Walker metric and redundancy in the generalized Einstein equations

    International Nuclear Information System (INIS)

    Kao, W.F.; Pen, U.

    1991-01-01

    A nontrivial redundancy relation, due to the differential structure of the gravitational Bianchi identity as well as the symmetry of the Friedmann-Robertson-Walker metric, in the gravitational field equation is clarified. A generalized Friedmann-Robertson-Walker metric is introduced in order to properly define a one-dimensional reduced problem which offers an alternative approach to obtain the gravitational field equations on Friedmann-Robertson-Walker spaces

  12. Expanding perfect fluid generalizations of the C metric

    International Nuclear Information System (INIS)

    Wylleman, Lode; Beke, David

    2010-01-01

    Petrov type D gravitational fields, generated by a perfect fluid with spatially homogeneous energy density and with flow lines which form a nonshearing and nonrotating timelike congruence, are reexamined. It turns out that the anisotropic such spacetimes, which comprise the vacuum C metric as a limit case, can have nonzero expansion, contrary to the conclusion in the original investigation by Barnes [A. Barnes, Gen. Relativ. Gravit. 4, 105 (1973).]. Apart from the static members, this class consists of cosmological models with precisely one symmetry. The general line element is constructed and some important properties are discussed. It is also shown that purely electric Petrov type D vacuum spacetimes admit shear-free normal timelike congruences everywhere, even in the nonstatic regions. This result incited to deduce intrinsic, easily testable criteria regarding shear-free normality and staticity of Petrov type D spacetimes in general, which are added in an appendix.

  13. Summary of JENDL-2 general purpose file

    Energy Technology Data Exchange (ETDEWEB)

    Nakagawa, Tsuneo [ed.

    1984-06-15

    The general purpose file of the second version of Japanese Evaluated Nuclear Data Library (JENDL-2) was released in December 1982. Recently, descriptive data were added to JENDL-2 and at the same time the first revision of numerical data was performed. JENDL-2 (Rev.1) consists of the data for 89 nuclides and about 211,000 records in the ENDF/B-IV format. In this report, full listings of presently added descriptive data are given to summarize the JENDL-2 general purpose file. The 2200-m/sec and 14-MeV cross sections, resonance integrals, Maxwellian and fission spectrum averaged cross sections are given in a table. Average cross sections were also calculated in suitable energy intervals.

  14. Summary of JENDL-2 general purpose file

    International Nuclear Information System (INIS)

    Nakagawa, Tsuneo

    1984-06-01

    The general purpose file of the second version of Japanese Evaluated Nuclear Data Library (JENDL-2) was released in December 1982. Recently, descriptive data were added to JENDL-2 and at the same time the first revision of numerical data was performed. JENDL-2 (Rev1) consists of the data for 89 nuclides and about 211,000 records in the ENDF/B-IV format. In this report, full listings of presently added descriptive data are given to summarize the JENDL-2 general purpose file. The 2200-m/sec and 14-MeV cross sections, resonance integrals, Maxwellian and fission spectrum averaged cross sections are given in a table. Average cross sections were also calculated in suitable energy intervals. (author)

  15. Fixed point theorems for generalized α -β-weakly contraction mappings in metric spaces and applications.

    Science.gov (United States)

    Latif, Abdul; Mongkolkeha, Chirasak; Sintunavarat, Wutiphol

    2014-01-01

    We extend the notion of generalized weakly contraction mappings due to Choudhury et al. (2011) to generalized α-β-weakly contraction mappings. We show with examples that our new class of mappings is a real generalization of several known classes of mappings. We also establish fixed point results for such mappings in metric spaces. Applying our new results, we obtain fixed point results on ordinary metric spaces, metric spaces endowed with an arbitrary binary relation, and metric spaces endowed with graph.

  16. General-purpose RFQ design program

    International Nuclear Information System (INIS)

    Wadlinger, E.A.

    1984-01-01

    We have written a general-purpose, radio-frequency quadrupole (RFQ) design program that allows maximum flexibility in picking design algorithms. This program optimizes the RFQ on any combination of design parameters while simultaneously satisfying mutually compatible, physically required constraint equations. It can be very useful for deriving various scaling laws for RFQs. This program has a friendly user interface in addition to checking the consistency of the user-defined requirements and is written to minimize the effort needed to incorporate additional constraint equations. We describe the program and present some examples

  17. Report of the general purpose detector group

    International Nuclear Information System (INIS)

    Barbaro-Galtieri, A.; Bartel, W.; Bulos, F.; Cool, R.; Hanson, G.; Koetz, U.; Kottahaus, R.; Loken, S.; Luke, D.; Rothenberg, A.

    1975-01-01

    A general purpose detector for PEP is described. The main components of this detector are a l meter radius, 15 kilogauss superconducting solenoidal magnet with drift chambers to detect and measure the momentum of charged particles, a liquid argon neutral detector and hadron calorimeter, and a system of Cherenkov and time-of-flight counters for identification of charged hadrons. A major consideration in the design of this detector was that it be flexible: the magnet coil and drift chambers form a core around which various apparatus for specialized detection can be placed

  18. General Purpose Crate (GPC) for control applications

    International Nuclear Information System (INIS)

    Singh, Kundan; Munda, Deepak K.; Jain, Mamta; Archunan, M.; Barua, P.; Ajith Kumar, B.P.

    2011-01-01

    A General Purpose Crate (GPC) capable of handling digital and analog Inputs/Outputs signals has been developed at Inter University Accelerator Centre (IUAC), New Delhi, for accelerator control system applications. The system includes back-plane bus with on board plugged-in single board computer with PC104 and Ethernet interface, running Linux operating system. The bus control logic is designed on the back-plane pcb itself, making the system more rugged. The various types of digital and analog input/output modules can be plugged into the back plane bus randomly with standard euro connectors, which provides highly reliable and dust free contacts. Maximum eight modules can be inserted into the crate. The total power consumption for various types of modules and back-plane controller is approximately 50 watts. The multi-output DC power supply from COSEL has been used in the crate. The general purpose crate is software compatible with the CAMAC crates used in the accelerator control system. (author)

  19. Exact solutions of strong gravity in generalized metrics

    International Nuclear Information System (INIS)

    Hojman, R.; Smailagic, A.

    1981-05-01

    We consider classical solutions for the strong gravity theory of Salam and Strathdee in a wider class of metrics with positive, zero and negative curvature. It turns out that such solutions exist and their relevance for quark confinement is explored. Only metrics with positive curvature (spherical symmetry) give a confining potential in a simple picture of the scalar hadron. This supports the idea of describing the hadron as a closed microuniverse of the strong metric. (author)

  20. General-Purpose Software For Computer Graphics

    Science.gov (United States)

    Rogers, Joseph E.

    1992-01-01

    NASA Device Independent Graphics Library (NASADIG) is general-purpose computer-graphics package for computer-based engineering and management applications which gives opportunity to translate data into effective graphical displays for presentation. Features include two- and three-dimensional plotting, spline and polynomial interpolation, control of blanking of areas, multiple log and/or linear axes, control of legends and text, control of thicknesses of curves, and multiple text fonts. Included are subroutines for definition of areas and axes of plots; setup and display of text; blanking of areas; setup of style, interpolation, and plotting of lines; control of patterns and of shading of colors; control of legends, blocks of text, and characters; initialization of devices; and setting of mixed alphabets. Written in FORTRAN 77.

  1. SRAC95; general purpose neutronics code system

    International Nuclear Information System (INIS)

    Okumura, Keisuke; Tsuchihashi, Keichiro; Kaneko, Kunio.

    1996-03-01

    SRAC is a general purpose neutronics code system applicable to core analyses of various types of reactors. Since the publication of JAERI-1302 for the revised SRAC in 1986, a number of additions and modifications have been made for nuclear data libraries and programs. Thus, the new version SRAC95 has been completed. The system consists of six kinds of nuclear data libraries(ENDF/B-IV, -V, -VI, JENDL-2, -3.1, -3.2), five modular codes integrated into SRAC95; collision probability calculation module (PIJ) for 16 types of lattice geometries, Sn transport calculation modules(ANISN, TWOTRAN), diffusion calculation modules(TUD, CITATION) and two optional codes for fuel assembly and core burn-up calculations(newly developed ASMBURN, revised COREBN). In this version, many new functions and data are implemented to support nuclear design studies of advanced reactors, especially for burn-up calculations. SRAC95 is available not only on conventional IBM-compatible computers but also on scalar or vector computers with the UNIX operating system. This report is the SRAC95 users manual which contains general description, contents of revisions, input data requirements, detail information on usage, sample input data and list of available libraries. (author)

  2. SRAC95; general purpose neutronics code system

    Energy Technology Data Exchange (ETDEWEB)

    Okumura, Keisuke; Tsuchihashi, Keichiro [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Kaneko, Kunio

    1996-03-01

    SRAC is a general purpose neutronics code system applicable to core analyses of various types of reactors. Since the publication of JAERI-1302 for the revised SRAC in 1986, a number of additions and modifications have been made for nuclear data libraries and programs. Thus, the new version SRAC95 has been completed. The system consists of six kinds of nuclear data libraries(ENDF/B-IV, -V, -VI, JENDL-2, -3.1, -3.2), five modular codes integrated into SRAC95; collision probability calculation module (PIJ) for 16 types of lattice geometries, Sn transport calculation modules(ANISN, TWOTRAN), diffusion calculation modules(TUD, CITATION) and two optional codes for fuel assembly and core burn-up calculations(newly developed ASMBURN, revised COREBN). In this version, many new functions and data are implemented to support nuclear design studies of advanced reactors, especially for burn-up calculations. SRAC95 is available not only on conventional IBM-compatible computers but also on scalar or vector computers with the UNIX operating system. This report is the SRAC95 users manual which contains general description, contents of revisions, input data requirements, detail information on usage, sample input data and list of available libraries. (author).

  3. Fixed Point Theorems for Generalized α-β-Weakly Contraction Mappings in Metric Spaces and Applications

    Directory of Open Access Journals (Sweden)

    Abdul Latif

    2014-01-01

    Full Text Available We extend the notion of generalized weakly contraction mappings due to Choudhury et al. (2011 to generalized α-β-weakly contraction mappings. We show with examples that our new class of mappings is a real generalization of several known classes of mappings. We also establish fixed point results for such mappings in metric spaces. Applying our new results, we obtain fixed point results on ordinary metric spaces, metric spaces endowed with an arbitrary binary relation, and metric spaces endowed with graph.

  4. Indefinite-metric quantum field theory of general relativity, 6

    International Nuclear Information System (INIS)

    Nakanishi, Noboru

    1979-01-01

    The canonical commutation relations are analyzed in detail in the indefinite-metric quantum field theory of gravity based on the vierbein formalism. It is explicitly verified that the BRS charge, the local-Lorentz-BRS charge and the Poincare generators satisfy the expected commutation relations. (author)

  5. A generalized Web Service response time metric to support collaborative and corroborative Web Service monitoring

    CSIR Research Space (South Africa)

    Makitla, I

    2015-12-01

    Full Text Available In this paper, we describe the development of a generalized metric for computing response time of a web service. Such a generalized metric would help to develop consensus with regards to the meanings of contracted Quality of Service (QoS) parameters...

  6. Can Universities Profit from General Purpose Inventions?

    DEFF Research Database (Denmark)

    Barirani, Ahmad; Beaudry, Catherine; Agard, Bruno

    2017-01-01

    The lack of control over downstream assets can hinder universities’ ability to extract rents from their inventive activities. We explore this possibility by assessing the relationship between invention generality and renewal decisions for a sample of Canadian nanotechnology patents. Our results s...

  7. Generalized fixed point theorems for compatible mappings with some types in fuzzy metric spaces

    International Nuclear Information System (INIS)

    Cho, Yeol Je; Sedghi, Shaban; Shobe, Nabi

    2009-01-01

    In this paper, we give some new definitions of compatible mappings of types (I) and (II) in fuzzy metric spaces and prove some common fixed point theorems for four mappings under the condition of compatible mappings of types (I) and (II) in complete fuzzy metric spaces. Our results extend, generalize and improve the corresponding results given by many authors.

  8. 7 CFR 225.1 - General purpose and scope.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 4 2010-01-01 2010-01-01 false General purpose and scope. 225.1 Section 225.1... AGRICULTURE CHILD NUTRITION PROGRAMS SUMMER FOOD SERVICE PROGRAM General § 225.1 General purpose and scope... primary purpose of the Program is to provide food service to children from needy areas during periods when...

  9. 7 CFR 2902.48 - General purpose household cleaners.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false General purpose household cleaners. 2902.48 Section... PROCUREMENT Designated Items § 2902.48 General purpose household cleaners. (a) Definition. Products designed... procurement preference for qualifying biobased general purpose household cleaners. By that date, Federal...

  10. 7 CFR 2902.37 - General purpose de-icers.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false General purpose de-icers. 2902.37 Section 2902.37... Items § 2902.37 General purpose de-icers. (a) Definition. Chemical products (e.g., salt, fluids) that... preference for qualifying biobased general purpose de-icers. By that date, Federal agencies that have the...

  11. 7 CFR 285.1 - General purpose and scope.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 4 2010-01-01 2010-01-01 false General purpose and scope. 285.1 Section 285.1... COMMONWEALTH OF PUERTO RICO § 285.1 General purpose and scope. This part describes the general terms and... government of the Commonwealth of Puerto Rico for the purpose of designing and conducting a nutrition...

  12. 47 CFR 32.6124 - General purpose computers expense.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 2 2010-10-01 2010-10-01 false General purpose computers expense. 32.6124... General purpose computers expense. This account shall include the costs of personnel whose principal job is the physical operation of general purpose computers and the maintenance of operating systems. This...

  13. 7 CFR 246.1 - General purpose and scope.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 4 2010-01-01 2010-01-01 false General purpose and scope. 246.1 Section 246.1... General § 246.1 General purpose and scope. This part announces regulations under which the Secretary of... health by reason of inadequate nutrition or health care, or both. The purpose of the Program is to...

  14. 7 CFR 250.1 - General purpose and scope.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 4 2010-01-01 2010-01-01 false General purpose and scope. 250.1 Section 250.1... AGRICULTURE GENERAL REGULATIONS AND POLICIES-FOOD DISTRIBUTION DONATION OF FOODS FOR USE IN THE UNITED STATES, ITS TERRITORIES AND POSSESSIONS AND AREAS UNDER ITS JURISDICTION General § 250.1 General purpose and...

  15. 7 CFR 277.1 - General purpose and scope.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 4 2010-01-01 2010-01-01 false General purpose and scope. 277.1 Section 277.1 Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF... AGENCIES § 277.1 General purpose and scope. (a) Purpose. This part establishes uniform requirements for the...

  16. 7 CFR 253.1 - General purpose and scope.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 4 2010-01-01 2010-01-01 false General purpose and scope. 253.1 Section 253.1... AGRICULTURE GENERAL REGULATIONS AND POLICIES-FOOD DISTRIBUTION ADMINISTRATION OF THE FOOD DISTRIBUTION PROGRAM FOR HOUSEHOLDS ON INDIAN RESERVATIONS § 253.1 General purpose and scope. This part describes the terms...

  17. 7 CFR 1485.10 - General purpose and scope.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false General purpose and scope. 1485.10 Section 1485.10... FOREIGN MARKETS FOR AGRICULTURAL COMMODITIES Market Access Program § 1485.10 General purpose and scope. (a.../Market Access Program (EIP/MAP). It also establishes the general terms and conditions applicable to MAP...

  18. 7 CFR 215.1 - General purpose and scope.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 4 2010-01-01 2010-01-01 false General purpose and scope. 215.1 Section 215.1... AGRICULTURE CHILD NUTRITION PROGRAMS SPECIAL MILK PROGRAM FOR CHILDREN § 215.1 General purpose and scope. This part announces the policies and prescribes the general regulations with respect to the Special Milk...

  19. 7 CFR 248.1 - General purpose and scope.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 4 2010-01-01 2010-01-01 false General purpose and scope. 248.1 Section 248.1... AGRICULTURE CHILD NUTRITION PROGRAMS WIC FARMERS' MARKET NUTRITION PROGRAM (FMNP) General § 248.1 General purpose and scope. This part announces regulations under which the Secretary of Agriculture shall carry...

  20. 46 CFR 7.1 - General purpose of boundary lines.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false General purpose of boundary lines. 7.1 Section 7.1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY PROCEDURES APPLICABLE TO THE PUBLIC BOUNDARY LINES General § 7.1 General purpose of boundary lines. The lines in this part delineate the application of the...

  1. 7 CFR 251.1 - General purpose and scope.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 4 2010-01-01 2010-01-01 false General purpose and scope. 251.1 Section 251.1... AGRICULTURE GENERAL REGULATIONS AND POLICIES-FOOD DISTRIBUTION THE EMERGENCY FOOD ASSISTANCE PROGRAM § 251.1 General purpose and scope. This part announces the policies and prescribes the regulations necessary to...

  2. 7 CFR 226.1 - General purpose and scope.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 4 2010-01-01 2010-01-01 false General purpose and scope. 226.1 Section 226.1 Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS CHILD AND ADULT CARE FOOD PROGRAM General § 226.1 General purpose and...

  3. General Rotational Surfaces in Pseudo-Euclidean 4-Space with Neutral Metric

    OpenAIRE

    Aleksieva, Yana; Milousheva, Velichka; Turgay, Nurettin Cenk

    2016-01-01

    We define general rotational surfaces of elliptic and hyperbolic type in the pseudo-Euclidean 4-space with neutral metric which are analogous to the general rotational surfaces of C. Moore in the Euclidean 4-space. We study Lorentz general rotational surfaces with plane meridian curves and give the complete classification of minimal general rotational surfaces of elliptic and hyperbolic type, general rotational surfaces with parallel normalized mean curvature vector field, flat general rotati...

  4. Indefinite-metric quantum field theory of general relativity

    International Nuclear Information System (INIS)

    Nakanishi, Noboru

    1978-01-01

    Quantum field theory of Einstein's general relativity is formulated in the indefinitemetric Hilbert space in such a way that asymptotic fields are manifestly Lorentz covariant and the physical S-matrix is unitary. The general coordinate transformation is transcribed into a q-number transformation, called the BRS transformation. Its abstract definition is presented on the basis of the BRS transformation for the Yang-Mills theory. The BRS transformation for general relativity is then explicitly constructed. The gauge-fixing Lagrangian density and the Faddeev-Popov one are introduced in such a way that their sum behaves like a scalar density under the BRS transformation. One can then proceed in the same way as in the Kugo-Ojima formalism of the Yang-Mills theory to establish the unitarity of the physical S-matrix. (author)

  5. Indefinite-metric quantum field theory of general relativity, 2

    International Nuclear Information System (INIS)

    Nakanishi, Noboru

    1978-01-01

    The canonical commutation relations are analyzed in detail in the manifestly covariant quantum field theory of general relativity proposed previously. It is explicitly proved that the BRS charge is indeed the generator of the BRS transformation both in the Landau gauge and in the non-Landau one. The equivalence between the field equations and the Heisenberg equations is confirmed. (author)

  6. Some Remarks on Space-Time Decompositions, and Degenerate Metrics, in General Relativity

    Science.gov (United States)

    Bengtsson, Ingemar

    Space-time decomposition of the Hilbert-Palatini action, written in a form which admits degenerate metrics, is considered. Simple numerology shows why D = 3 and 4 are singled out as admitting a simple phase space. The canonical structure of the degenerate sector turns out to be awkward. However, the real degenerate metrics obtained as solutions are the same as those that occur in Ashtekar's formulation of complex general relativity. An exact solution of Ashtekar's equations, with degenerate metric, shows that the manifestly four-dimensional form of the action, and its 3 + 1 form, are not quite equivalent.

  7. 7 CFR 245.1 - General purpose and scope.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 4 2010-01-01 2010-01-01 false General purpose and scope. 245.1 Section 245.1 Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF... SCHOOLS § 245.1 General purpose and scope. (a) This part established the responsibilities of State...

  8. 7 CFR 220.1 - General purpose and scope.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 4 2010-01-01 2010-01-01 false General purpose and scope. 220.1 Section 220.1 Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS SCHOOL BREAKFAST PROGRAM § 220.1 General purpose and scope. This part...

  9. 7 CFR 281.1 - General purpose and scope.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 4 2010-01-01 2010-01-01 false General purpose and scope. 281.1 Section 281.1 Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF... RESERVATIONS § 281.1 General purpose and scope. (a) These regulations govern the operation of the Food Stamp...

  10. 7 CFR 1728.10 - General purpose and scope.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 11 2010-01-01 2010-01-01 false General purpose and scope. 1728.10 Section 1728.10 Agriculture Regulations of the Department of Agriculture (Continued) RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE ELECTRIC STANDARDS AND SPECIFICATIONS FOR MATERIALS AND CONSTRUCTION § 1728.10 General purpose and...

  11. 7 CFR 235.1 - General purpose and scope.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 4 2010-01-01 2010-01-01 false General purpose and scope. 235.1 Section 235.1 Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS STATE ADMINISTRATIVE EXPENSE FUNDS § 235.1 General purpose and scope...

  12. 21 CFR 864.4010 - General purpose reagent.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false General purpose reagent. 864.4010 Section 864.4010 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES HEMATOLOGY AND PATHOLOGY DEVICES Specimen Preparation Reagents § 864.4010 General purpose...

  13. 47 CFR 32.2124 - General purpose computers.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 2 2010-10-01 2010-10-01 false General purpose computers. 32.2124 Section 32... General purpose computers. (a) This account shall include the original cost of computers and peripheral... financial, statistical, or other business analytical reports; preparation of payroll, customer bills, and...

  14. Standalone General Purpose Data Logger Design and Implementation

    African Journals Online (AJOL)

    This paper describes the design of a general purpose data logger that is compatible with a variety of transducers, potentially permitting the measurement and recording of a wide range of phenomena. The recorded data can be retrieved to a PC via an RS-232 serial port. The standalone general purpose data logger ...

  15. Common Fixed Points of Generalized Cocyclic Mappings in Complex Valued Metric Spaces

    Directory of Open Access Journals (Sweden)

    Mujahid Abbas

    2015-01-01

    Full Text Available We present fixed point results of mappings satisfying generalized contractive conditions in complex valued metric spaces. As an application, we obtain a common fixed point of a pair of weakly compatible mappings. Some common fixed point results of generalized contractive-type mappings involved in cocyclic representation of a nonempty subset of a complex valued metric space are also obtained. Some examples are also presented to support the results proved herein. These results extend and generalize many results in the existing literature.

  16. Common Fixed Points of Generalized Rational Type Cocyclic Mappings in Multiplicative Metric Spaces

    Directory of Open Access Journals (Sweden)

    Mujahid Abbas

    2015-01-01

    Full Text Available The aim of this paper is to present fixed point result of mappings satisfying a generalized rational contractive condition in the setup of multiplicative metric spaces. As an application, we obtain a common fixed point of a pair of weakly compatible mappings. Some common fixed point results of pair of rational contractive types mappings involved in cocyclic representation of a nonempty subset of a multiplicative metric space are also obtained. Some examples are presented to support the results proved herein. Our results generalize and extend various results in the existing literature.

  17. Metric modular spaces

    CERN Document Server

    Chistyakov, Vyacheslav

    2015-01-01

    Aimed toward researchers and graduate students familiar with elements of functional analysis, linear algebra, and general topology; this book contains a general study of modulars, modular spaces, and metric modular spaces. Modulars may be thought of as generalized velocity fields and serve two important purposes: generate metric spaces in a unified manner and provide a weaker convergence, the modular convergence, whose topology is non-metrizable in general. Metric modular spaces are extensions of metric spaces, metric linear spaces, and classical modular linear spaces. The topics covered include the classification of modulars, metrizability of modular spaces, modular transforms and duality between modular spaces, metric  and modular topologies. Applications illustrated in this book include: the description of superposition operators acting in modular spaces, the existence of regular selections of set-valued mappings, new interpretations of spaces of Lipschitzian and absolutely continuous mappings, the existe...

  18. A general purpose code for Monte Carlo simulations

    International Nuclear Information System (INIS)

    Wilcke, W.W.; Rochester Univ., NY

    1984-01-01

    A general-purpose computer code MONTHY has been written to perform Monte Carlo simulations of physical systems. To achieve a high degree of flexibility the code is organized like a general purpose computer, operating on a vector describing the time dependent state of the system under simulation. The instruction set of the 'computer' is defined by the user and is therefore adaptable to the particular problem studied. The organization of MONTHY allows iterative and conditional execution of operations. (orig.)

  19. Efficient probabilistic model checking on general purpose graphic processors

    NARCIS (Netherlands)

    Bosnacki, D.; Edelkamp, S.; Sulewski, D.; Pasareanu, C.S.

    2009-01-01

    We present algorithms for parallel probabilistic model checking on general purpose graphic processing units (GPGPUs). For this purpose we exploit the fact that some of the basic algorithms for probabilistic model checking rely on matrix vector multiplication. Since this kind of linear algebraic

  20. Strategic Human Resource Metrics: A Perspective of the General Systems Theory

    Directory of Open Access Journals (Sweden)

    Chux Gervase Iwu

    2016-04-01

    Full Text Available Measuring and quantifying strategic human resource outcomes in relation to key performance criteria is essential to developing value-adding metrics. Objectives This paper posits (using a general systems lens that strategic human resource metrics should interpret the relationship between attitudinal human resource outcomes and performance criteria such as profitability, quality or customer service. Approach Using the general systems model as underpinning theory, the study assesses the variation in response to a Likert type questionnaire with twenty-four (24 items measuring the major attitudinal dispositions of HRM outcomes (employee commitment, satisfaction, engagement and embeddedness. Results A Chi-square test (Chi-square test statistic = 54.898, p=0.173 showed that variation in responses to the attitudinal statements occurred due to chance. This was interpreted to mean that attitudinal human resource outcomes influence performance as a unit of system components. The neutral response was found to be associated with the ‘reject’ response than the ‘acceptance’ response. Value The study offers suggestion on the determination of strategic HR metrics and recommends the use of systems theory in HRM related studies. Implications This study provides another dimension to human resource metrics by arguing that strategic human resource metrics should measure the relationship between attitudinal human resource outcomes and performance using a systems perspective.

  1. Generally covariant Hamilton-Jacobi equation and rotated liquid sphere metrics

    International Nuclear Information System (INIS)

    Abdil'din, M.M.; Abdulgafarov, M.K.; Abishev, M.E.

    2005-01-01

    In the work Lense-Thirring problem on corrected Fock's first approximation metrics by Hamilton-Jacobi method considered. Generally covariant Hamilton-Jacobi equation had been sold by separation of variable method. Path equation of probe particle motion in rotated liquid sphere field is obtained. (author)

  2. Fixed point results for contractions involving generalized altering distances in ordered metric spaces

    Directory of Open Access Journals (Sweden)

    Samet Bessem

    2011-01-01

    Full Text Available Abstract In this article, we establish coincidence point and common fixed point theorems for mappings satisfying a contractive inequality which involves two generalized altering distance functions in ordered complete metric spaces. As application, we study the existence of a common solution to a system of integral equations. 2000 Mathematics subject classification. Primary 47H10, Secondary 54H25

  3. On the generally invariant Lagrangians for the metric field and other tensor fields

    International Nuclear Information System (INIS)

    Novotny, J.

    1978-01-01

    The Krupka and Trautman method for the description of all generally invariant functions of the components of geometrical object fields is applied to the invariants of second degree of the metrical field and other tensor fields. The complete system of differential identities fulfilled by the invariants mentioned is found and it is proved that these invariants depend on the tensor quantities only. (author)

  4. 7 CFR 227.1 - General purpose and scope.

    Science.gov (United States)

    2010-01-01

    ... management training of school foodservice personnel, and (c) the conduct of nutrition education activities in... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS NUTRITION EDUCATION AND TRAINING PROGRAM General § 227.1 General purpose...

  5. 24 CFR 902.1 - Purpose and general description.

    Science.gov (United States)

    2010-04-01

    ... assessments. The Real Estate Assessment Center (REAC) is responsible for assessing and scoring the performance... uniform and objective protocols for the physical inspection of properties and the financial assessment of... URBAN DEVELOPMENT PUBLIC HOUSING ASSESSMENT SYSTEM General Provisions § 902.1 Purpose and general...

  6. Theory and experiments in general relativity and other metric theories of gravity

    International Nuclear Information System (INIS)

    Ciufolini, I.

    1984-01-01

    In Chapter I, after an introduction to theories of gravity alternative to general relativity, metric theories, and the post-Newtonian parameterized (PNN) formalism, a new class of metric theories of gravity is defined. As a result the post-Newtonian approximation of the new theories is not described by the PPN formalism. In fact under the weak field and slow motion hypothesis, the post-Newtonian expression of the metric tensor contains an infinite set of new terms and correspondingly an infinite set of new PPN parameters. Chapter II, III, and IV are devoted to new experiments to test general relativity and other metric theories of gravity. In particular, in chapter IV, it is shown that two general relativistics effects, the Lense-Thirring and De Sitter-Fokker precessions of the nodal lines of an Earth artificial satellite are today detectable using high altitude laser ranged artificial satellites such as Lageos. The orbit of this satellite is known with unprecedented accuracy. The author then describes a method of measuring these relativistic precessions using Lageos together with another high altitude laser ranged similar satellite with appropriately chosen orbital parameters

  7. Multidimensional coincidence point results for generalized $(\\psi ,\\theta ,\\varphi$-contraction on ordered metric spaces

    Directory of Open Access Journals (Sweden)

    Bhavana Deshpande

    2017-11-01

    Full Text Available The main objective of this research article is to establish some coincidence point theorem for $g$-non-decreasing mappings under generalized $(\\psi ,\\theta ,\\varphi $-contraction on a partially ordered metric space. Furthermore, we show how multidimensional results can be seen as a simple consequences of our unidimensional coincidence point theorem. Our results modify, improve, sharpen, enrich and generalize various known results.

  8. Development of General Purpose Data Acquisition Shell (GPDAS)

    International Nuclear Information System (INIS)

    Chung, Y.; Kim, K.

    1995-01-01

    This note is intended as an abbreviated introduction to the concept and the structure of General Purpose Data Acquisitions Shell (GPDAS) and assumes the reader has a certain level of familiarity with programming in general. The structure of the following sections consists of brief explanations of the concepts and commands of GPDAS, followed by several examples. Some of these are tabulated in the appendices at the end of this note

  9. On the System and Engineering Design of the General Purpose ...

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 13; Issue 5. On the System and Engineering Design of the General Purpose Electronic Digital Computer at TIFR. Rangaswamy Narasimhan. Classics Volume 13 Issue 5 May 2008 pp 490-501 ...

  10. Geographical parthenogenesis: General purpose genotypes and frozen niche variation

    DEFF Research Database (Denmark)

    Vrijenhoek, Robert C.; Parker, Dave

    2009-01-01

    hypotheses concerning the evolution of niche breadth in asexual species - the "general-purpose genotype" (GPG) and "frozen niche-variation" (FNV) models. The two models are often portrayed as mutually exclusive, respectively viewing clonal lineages as generalists versus specialists. Nonetheless...

  11. Sense and purpose of bilateral agreements - a general survey

    International Nuclear Information System (INIS)

    Buehler, O.

    1999-01-01

    Switzerland has concluded with its neighbouring States several bilateral agreements on nuclear information and on mutual help in case of catastrophes. The following general survey explains the sense and purpose of these agreements which complement the IAEA-Conventions referring to the same matters. (orig.) [de

  12. Weldability of general purpose heat source new-process iridium

    International Nuclear Information System (INIS)

    Kanne, W.R.

    1987-01-01

    Weldability tests on General Purpose Heat Source (GPHS) iridium capsules showed that a new iridium fabrication process reduced susceptibility to underbead cracking. Seventeen capsules were welded (a total of 255 welds) in four categories and the number of cracks in each weld was measured

  13. General-purpose heat source development. Phase I: design requirements

    International Nuclear Information System (INIS)

    Snow, E.C.; Zocher, R.W.

    1978-09-01

    Studies have been performed to determine the necessary design requirements for a 238 PuO 2 General-Purpose Heat Source (GPHS). Systems and missions applications, as well as accident conditions, were considered. The results of these studies, along with the recommended GPHS design requirements, are given in this report

  14. Design of a multi-purpose fragment screening library using molecular complexity and orthogonal diversity metrics

    Science.gov (United States)

    Lau, Wan F.; Withka, Jane M.; Hepworth, David; Magee, Thomas V.; Du, Yuhua J.; Bakken, Gregory A.; Miller, Michael D.; Hendsch, Zachary S.; Thanabal, Venkataraman; Kolodziej, Steve A.; Xing, Li; Hu, Qiyue; Narasimhan, Lakshmi S.; Love, Robert; Charlton, Maura E.; Hughes, Samantha; van Hoorn, Willem P.; Mills, James E.

    2011-07-01

    Fragment Based Drug Discovery (FBDD) continues to advance as an efficient and alternative screening paradigm for the identification and optimization of novel chemical matter. To enable FBDD across a wide range of pharmaceutical targets, a fragment screening library is required to be chemically diverse and synthetically expandable to enable critical decision making for chemical follow-up and assessing new target druggability. In this manuscript, the Pfizer fragment library design strategy which utilized multiple and orthogonal metrics to incorporate structure, pharmacophore and pharmacological space diversity is described. Appropriate measures of molecular complexity were also employed to maximize the probability of detection of fragment hits using a variety of biophysical and biochemical screening methods. In addition, structural integrity, purity, solubility, fragment and analog availability as well as cost were important considerations in the selection process. Preliminary analysis of primary screening results for 13 targets using NMR Saturation Transfer Difference (STD) indicates the identification of uM-mM hits and the uniqueness of hits at weak binding affinities for these targets.

  15. A Small Acoustic Goniometer for General Purpose Research.

    Science.gov (United States)

    Pook, Michael L; Loo, Sin Ming

    2016-04-29

    Understanding acoustic events and monitoring their occurrence is a useful aspect of many research projects. In particular, acoustic goniometry allows researchers to determine the source of an event based solely on the sound it produces. The vast majority of acoustic goniometry research projects used custom hardware targeted to the specific application under test. Unfortunately, due to the wide range of sensing applications, a flexible general purpose hardware/firmware system does not exist for this purpose. This article focuses on the development of such a system which encourages the continued exploration of general purpose hardware/firmware and lowers barriers to research in projects requiring the use of acoustic goniometry. Simulations have been employed to verify system feasibility, and a complete hardware implementation of the acoustic goniometer has been designed and field tested. The results are reported, and suggested areas for improvement and further exploration are discussed.

  16. Partial rectangular metric spaces and fixed point theorems.

    Science.gov (United States)

    Shukla, Satish

    2014-01-01

    The purpose of this paper is to introduce the concept of partial rectangular metric spaces as a generalization of rectangular metric and partial metric spaces. Some properties of partial rectangular metric spaces and some fixed point results for quasitype contraction in partial rectangular metric spaces are proved. Some examples are given to illustrate the observed results.

  17. General-Purpose Data Containers for Science and Engineering

    International Nuclear Information System (INIS)

    2015-01-01

    In 2012 the SG38 international committee was formed to develop a modern structure to replace the ENDF-6 format for storing evaluated nuclear reaction data on a computer system. This committee divided the project into seven tasks. One of these tasks, the design of General-Purpose Data Containers (GPDCs), is described in this article. What type of data does SG38 need to store and why is the task called General-Purpose Data Containers? The most common types of data in an evaluated nuclear reaction database are representations of physical functions in tabulated forms. There is also a need to store 1-dimensional functions using truncated Legendre or polynomial (or others) expansions. The phrase General-Purpose implies that the containers are to be designed to store generic forms of tabulated data rather than one for each physical function. Also, where possible, it would be beneficial to design containers that can store data forms not currently used in evaluated nuclear database or at least be easily extended. In addition to containers for storing physical functions as tabulated data, other types of containers are needed. There exists a desire within SG38 to support the storage of documentation at various levels within an evaluated file. Containers for storing non-functional data (e.g., a list of numbers) as well as units and labels for axes are also needed. Herein, containers for storing physical functions are called functional containers. One of the goals for the general-purpose data containers task is to design containers that will be useful to other scientific and engineering applications. To meet this goal, task members should think outside of the immediate needs of evaluated nuclear data to ensure that the containers are general- purpose rather than simply repackaged versions of existing containers. While the examples in this article may be specific to nuclear reaction data, it is hoped that the end product will be useful for other applications. To this end, some

  18. Conformal changes of metrics and the initial-value problem of general relativity

    International Nuclear Information System (INIS)

    Mielke, E.W.

    1977-01-01

    Conformal techniques are reviewed with respect to applications to the initial-value problem of general relativity. Invariant transverse traceless decompositions of tensors, one of its main tools, are related to representations of the group of 'conformeomorphisms' acting on the space of all Riemannian metrics on M. Conformal vector fields, a kernel in the decomposition, are analyzed on compact manifolds with constant scalar curvature. The realization of arbitrary functions as scalar curvature of conformally equivalent metrics, a generalization of Yamabe's (Osaka Math. J.; 12:12 (1960)) conjecture, is applied to the Hamiltonian constraint and to the issue of positive energy of gravitational fields. Various approaches to the solution of the initial-value equations produced by altering the scaling behaviour of the second fundamental form are compared. (author)

  19. How General-Purpose can a GPU be?

    Directory of Open Access Journals (Sweden)

    Philip Machanick

    2015-12-01

    Full Text Available The use of graphics processing units (GPUs in general-purpose computation (GPGPU is a growing field. GPU instruction sets, while implementing a graphics pipeline, draw from a range of single instruction multiple datastream (SIMD architectures characteristic of the heyday of supercomputers. Yet only one of these SIMD instruction sets has been of application on a wide enough range of problems to survive the era when the full range of supercomputer design variants was being explored: vector instructions. This paper proposes a reconceptualization of the GPU as a multicore design with minimal exotic modes of parallelism so as to make GPGPU truly general.

  20. Kernel and wavelet density estimators on manifolds and more general metric spaces

    DEFF Research Database (Denmark)

    Cleanthous, G.; Georgiadis, Athanasios; Kerkyacharian, G.

    We consider the problem of estimating the density of observations taking values in classical or nonclassical spaces such as manifolds and more general metric spaces. Our setting is quite general but also sufficiently rich in allowing the development of smooth functional calculus with well localized...... spectral kernels, Besov regularity spaces, and wavelet type systems. Kernel and both linear and nonlinear wavelet density estimators are introduced and studied. Convergence rates for these estimators are established, which are analogous to the existing results in the classical setting of real...

  1. Speed Control of General Purpose Engine with Electronic Governor

    Science.gov (United States)

    Sawut, Umerujan; Tohti, Gheyret; Takigawa, Buso; Tsuji, Teruo

    This paper presents a general purpose engine speed control system with an electronic governor in order to improve the current system with a mechanical governor which shows unstable characteristics by change of mecanical friction or A/F ratio (Air/Fuel ratio). For the control system above, there are problems that the feedback signal is only a crank angle because of cost and the controlled object is a general purpose engine which is strongly nonlinear. In order to overcome these problems, the system model is shown for the dynamic estimation of the amount of air flow and the robust controller is designed. That is, the proposed system includes the robust sliding-mode controller by the feedback signal of only a crank angle where Genetic Algorithm is applied for the controller design. The simulation and the experiments by MATLAB/Simulink are performed to show the effectiveness of our proposal.

  2. The ATLAS Trigger Algorithms for General Purpose Graphics Processor Units

    CERN Document Server

    Tavares Delgado, Ademar; The ATLAS collaboration

    2016-01-01

    The ATLAS Trigger Algorithms for General Purpose Graphics Processor Units Type: Talk Abstract: We present the ATLAS Trigger algorithms developed to exploit General­ Purpose Graphics Processor Units. ATLAS is a particle physics experiment located on the LHC collider at CERN. The ATLAS Trigger system has two levels, hardware-­based Level 1 and the High Level Trigger implemented in software running on a farm of commodity CPU. Performing the trigger event selection within the available farm resources presents a significant challenge that will increase future LHC upgrades. are being evaluated as a potential solution for trigger algorithms acceleration. Key factors determining the potential benefit of this new technology are the relative execution speedup, the number of GPUs required and the relative financial cost of the selected GPU. We have developed a trigger demonstrator which includes algorithms for reconstructing tracks in the Inner Detector and Muon Spectrometer and clusters of energy deposited in the Cal...

  3. Space shuttle general purpose computers (GPCs) (current and future versions)

    Science.gov (United States)

    1988-01-01

    Current and future versions of general purpose computers (GPCs) for space shuttle orbiters are represented in this frame. The two boxes on the left (AP101B) represent the current GPC configuration, with the input-output processor at far left and the central processing unit (CPU) at its side. The upgraded version combines both elements in a single unit (far right, AP101S).

  4. New Generation General Purpose Computer (GPC) compact IBM unit

    Science.gov (United States)

    1991-01-01

    New Generation General Purpose Computer (GPC) compact IBM unit replaces a two-unit earlier generation computer. The new IBM unit is documented in table top views alone (S91-26867, S91-26868), with the onboard equipment it supports including the flight deck CRT screen and keypad (S91-26866), and next to the two earlier versions it replaces (S91-26869).

  5. Survey of advanced general-purpose software for robot manipulators

    International Nuclear Information System (INIS)

    Latombe, J.C.

    1983-01-01

    Computer-controlled sensor-based robots will more and more common in industry. This paper attempts to survey the main trends of the development of advanced general-purpose software for robot manipulators. It is intended to make clear that robots are not only mechanical devices. They are truly programmable machines, and their programming, which occurs in an imperfectly modelled world,is somewhat different from conventional computer programming. (orig.)

  6. General Purpose Multimedia Dataset - GarageBand 2008

    DEFF Research Database (Denmark)

    Meng, Anders

    This document describes a general purpose multimedia data-set to be used in cross-media machine learning problems. In more detail we describe the genre taxonomy applied at http://www.garageband.com, from where the data-set was collected, and how the taxonomy have been fused into a more human...... understandable taxonomy. Finally, a description of various features extracted from both the audio and text are presented....

  7. ENDF/B-4 General Purpose File 1974

    International Nuclear Information System (INIS)

    Schwerer, O.

    1980-04-01

    This document summarizes contents and documentation of the 1974 version of the General Purpose File of the ENDF/B Library maintained by the National Nuclear Data Center (NNDC) at the Brookhaven National Laboratory, USA. The Library contains numerical neutron reaction data for 90 isotopes or elements. The entire Library or selective retrievals from it can be obtained on magnetic tape from the IAEA Nuclear Data Section. (author)

  8. Extension of Loop Quantum Gravity to Metric Theories beyond General Relativity

    International Nuclear Information System (INIS)

    Ma Yongge

    2012-01-01

    The successful background-independent quantization of Loop Quantum Gravity relies on the key observation that classical General Relativity can be cast into the connection-dynamical formalism with the structure group of SU(2). Due to this particular formalism, Loop Quantum Gravity was generally considered as a quantization scheme that applies only to General Relativity. However, we will show that the nonperturbative quantization procedure of Loop Quantum Gravity can be extended to a rather general class of metric theories of gravity, which have received increased attention recently due to motivations coming form cosmology and astrophysics. In particular, we will first introduce how to reformulate the 4-dimensional metric f(R) theories of gravity, as well as Brans-Dicke theory, into connection-dynamical formalism with real SU(2) connections as configuration variables. Through these formalisms, we then outline the nonpertubative canonical quantization of the f(R) theories and Brans-Dicke theory by extending the loop quantization scheme of General Relativity.

  9. Incremental and developmental perspectives for general-purpose learning systems

    Directory of Open Access Journals (Sweden)

    Fernando Martínez-Plumed

    2017-02-01

    Full Text Available The stupefying success of Articial Intelligence (AI for specic problems, from recommender systems to self-driving cars, has not yet been matched with a similar progress in general AI systems, coping with a variety of (dierent problems. This dissertation deals with the long-standing problem of creating more general AI systems, through the analysis of their development and the evaluation of their cognitive abilities. It presents a declarative general-purpose learning system and a developmental and lifelong approach for knowledge acquisition, consolidation and forgetting. It also analyses the use of the use of more ability-oriented evaluation techniques for AI evaluation and provides further insight for the understanding of the concepts of development and incremental learning in AI systems.

  10. The architecture of Newton, a general-purpose dynamics simulator

    Science.gov (United States)

    Cremer, James F.; Stewart, A. James

    1989-01-01

    The architecture for Newton, a general-purpose system for simulating the dynamics of complex physical objects, is described. The system automatically formulates and analyzes equations of motion, and performs automatic modification of this system equations when necessitated by changes in kinematic relationships between objects. Impact and temporary contact are handled, although only using simple models. User-directed influence of simulations is achieved using Newton's module, which can be used to experiment with the control of many-degree-of-freedom articulated objects.

  11. General-purpose heat source development. Phase II: conceptual designs

    International Nuclear Information System (INIS)

    Snow, E.C.; Zocher, R.W.; Grinberg, I.M.; Hulbert, L.E.

    1978-11-01

    Basic geometric module shapes and fuel arrays were studied to determine how well they could be expected to meet the General Purpose Heat Source (GPHS) design requirements. Seven conceptual designs were selected, detailed drawings produced, and these seven concepts analyzed. Three of these design concepts were selected as GPHS Trial Designs to be reanalyzed in more detail and tested. The geometric studies leading to the selection of the seven conceptual designs, the analyses of these designs, and the selection of the three trial designs are discussed

  12. Installation of new Generation General Purpose Computer (GPC) compact unit

    Science.gov (United States)

    1991-01-01

    In the Kennedy Space Center's (KSC's) Orbiter Processing Facility (OPF) high bay 2, Spacecraft Electronics technician Ed Carter (right), wearing clean suit, prepares for (26864) and installs (26865) the new Generation General Purpose Computer (GPC) compact IBM unit in Atlantis', Orbiter Vehicle (OV) 104's, middeck avionics bay as Orbiter Systems Quality Control technician Doug Snider looks on. Both men work for NASA contractor Lockheed Space Operations Company. All three orbiters are being outfitted with the compact IBM unit, which replaces a two-unit earlier generation computer.

  13. Foam: A general purpose Monte Carlo cellular algorithm

    International Nuclear Information System (INIS)

    Jadach, S.

    2003-01-01

    A general-purpose, self-adapting Monte Carlo (MC) algorithm implemented in the program Foam is described. The high efficiency of the MC, that is small maximum weight or variance of the MC weight is achieved by means of dividing the integration domain into small cells. The cells can be n-dimensional simplices, hyperrectangles cells. The next cell to be divided and the position/direction of the division hyperplane is chosen by the algorithm which optimizes the ratio of the maximum weight to the average weight or (optionally) the total variance. The algorithm is able to deal, in principle, with an arbitrary pattern of the singularities in the distribution

  14. Using general-purpose compression algorithms for music analysis

    DEFF Research Database (Denmark)

    Louboutin, Corentin; Meredith, David

    2016-01-01

    General-purpose compression algorithms encode files as dictionaries of substrings with the positions of these strings’ occurrences. We hypothesized that such algorithms could be used for pattern discovery in music. We compared LZ77, LZ78, Burrows–Wheeler and COSIATEC on classifying folk song...... in the input data, COSIATEC outperformed LZ77 with a mean F1 score of 0.123, compared with 0.053 for LZ77. However, when the music was processed a voice at a time, the F1 score for LZ77 more than doubled to 0.124. We also discovered a significant correlation between compression factor and F1 score for all...

  15. Using the general-purpose reactivity indicator: challenging examples.

    Science.gov (United States)

    Anderson, James S M; Melin, Junia; Ayers, Paul W

    2016-03-01

    We elucidate the regioselectivity of nucleophilic attack on substituted benzenesulfonates, quinolines, and pyridines using a general-purpose reactivity indicator (GPRI) for electrophiles. We observe that the GPRI is most accurate when the incoming nucleophile resembles a point charge. We further observe that the GPRI often chooses reactive "dead ends" as the most reactive sites as well as sterically hindered reactive sites. This means that care must be taken to remove sites that are inherently unreactive. Generally, among sites where reactions actually occur, the GPRI identifies the sites in the molecule that lead to the kinetically favored product(s). Furthermore, the GPRI can discern which sites react with hard reagents and which sites react with soft reagents. Because it is currently impossible to use the mathematical framework of conceptual DFT to identify sterically inaccessible sites and reactive dead ends, the GPRI is primarily useful as an interpretative, not a predictive, tool.

  16. Applications for a general purpose optical beam propagation code

    International Nuclear Information System (INIS)

    Munroe, J.L.; Wallace, N.W.

    1987-01-01

    Real world beam propagation and diffraction problems can rarely be solved by the analytical expressions commonly found in optics and lasers textbooks. These equations are typically valid only for paraxial geometries, for specific boundary conditions (e.g., infinite apertures), or for special assumptions (e.g., at focus). Numerical techniques must be used to solve the equations for the general case. LOTS, a public domain numerical beam propagation software package developed for this purpose, is a widely used and proven tool. The graphical presentation of results combined with a well designed command language make LOTS particularly user-friendly, and the recent implementation of LOTS on the IBM PC/XT family of desktop computes will make this capability available to a much larger group of users. This paper surveys several applications demonstrating the need for such a capability

  17. High vacuum general purpose scattering chamber for nuclear reaction study

    International Nuclear Information System (INIS)

    Suresh Kumar; Ojha, S.C.

    2003-01-01

    To study the nuclear reactions induced by beam from medium energy accelerators, one of the most common facility required is a scattering chamber. In the scattering chamber, projectile collides with the target nucleus and the scattered reaction products are detected with various type of nuclear detector at different angles with respect to the beam. The experiments are performed under high vacuum to minimize the background reaction and the energy losses of the charged particles. To make the chamber general purpose various requirement of the experiments are incorporated into it. Changing of targets, changing angle of various detectors while in vacuum are the most desired features. The other features like ascertaining the beam spot size and position on the target, minimizing the background counts by proper beam dump, accurate positioning of the detector as per plan etc. are some of the important requirements

  18. General-purpose event generators for LHC physics

    CERN Document Server

    Buckley, Andy; Gieseke, Stefan; Grellscheid, David; Hoche, Stefan; Hoeth, Hendrik; Krauss, Frank; Lonnblad, Leif; Nurse, Emily; Richardson, Peter; Schumann, Steffen; Seymour, Michael H.; Sjostrand, Torbjorn; Skands, Peter; Webber, Bryan

    2011-01-01

    We review the physics basis, main features and use of general-purpose Monte Carlo event generators for the simulation of proton-proton collisions at the Large Hadron Collider. Topics included are: the generation of hard-scattering matrix elements for processes of interest, at both leading and next-to-leading QCD perturbative order; their matching to approximate treatments of higher orders based on the showering approximation; the parton and dipole shower formulations; parton distribution functions for event generators; non-perturbative aspects such as soft QCD collisions, the underlying event and diffractive processes; the string and cluster models for hadron formation; the treatment of hadron and tau decays; the inclusion of QED radiation and beyond-Standard-Model processes. We describe the principal features of the ARIADNE, Herwig++, PYTHIA 8 and SHERPA generators, together with the Rivet and Professor validation and tuning tools, and discuss the physics philosophy behind the proper use of these generators ...

  19. General purpose heat source task group. Final report

    International Nuclear Information System (INIS)

    1979-01-01

    The results of thermal analyses and impact tests on a modified design of a 238 Pu-fueled general purpose heat source (GPHS) for spacecraft power supplies are presented. This work was performed to establish the safety of a heat source with pyrolytic graphite insulator shells located either inside or outside the graphite impact shell. This safety is dependent on the degree of aerodynamic heating of the heat source during reentry and on the ability of the heat source capsule to withstand impact after reentry. Analysis of wind tunnel and impact test data result in a recommended GPHS design which should meet all temperature and safety requirements. Further wind tunnel tests, drop tests, and impact tests are recommended to verify the safety of this design

  20. General-purpose parallel simulator for quantum computing

    International Nuclear Information System (INIS)

    Niwa, Jumpei; Matsumoto, Keiji; Imai, Hiroshi

    2002-01-01

    With current technologies, it seems to be very difficult to implement quantum computers with many qubits. It is therefore of importance to simulate quantum algorithms and circuits on the existing computers. However, for a large-size problem, the simulation often requires more computational power than is available from sequential processing. Therefore, simulation methods for parallel processors are required. We have developed a general-purpose simulator for quantum algorithms/circuits on the parallel computer (Sun Enterprise4500). It can simulate algorithms/circuits with up to 30 qubits. In order to test efficiency of our proposed methods, we have simulated Shor's factorization algorithm and Grover's database search, and we have analyzed robustness of the corresponding quantum circuits in the presence of both decoherence and operational errors. The corresponding results, statistics, and analyses are presented in this paper

  1. The RHIC general purpose multiplexed analog to digital converter system

    International Nuclear Information System (INIS)

    Michnoff, R.

    1995-01-01

    A general purpose multiplexed analog to digital converter system is currently under development to support acquisition of analog signals for the Relativistic Heavy Ion Collider (RHIC) at Brookhaven National Laboratory. The system consists of a custom intelligent VME based controller module (V113) and a 14-bit 64 channel multiplexed A/D converter module (V114). The design features two independent scan groups, where one scan group is capable of acquiring 64 channels at 60 Hz, concurrently with the second scan group acquiring data at an aggregate rate of up to 80 k samples/second. An interface to the RHIC serially encoded event line is used to synchronize acquisition. Data is stored in a circular static RAM buffer on the controller module, then transferred to a commercial VMEbus CPU board and higher level workstations for plotting, report Generation, analysis and storage

  2. Using a cognitive architecture for general purpose service robot control

    Science.gov (United States)

    Puigbo, Jordi-Ysard; Pumarola, Albert; Angulo, Cecilio; Tellez, Ricardo

    2015-04-01

    A humanoid service robot equipped with a set of simple action skills including navigating, grasping, recognising objects or people, among others, is considered in this paper. By using those skills the robot should complete a voice command expressed in natural language encoding a complex task (defined as the concatenation of a number of those basic skills). As a main feature, no traditional planner has been used to decide skills to be activated, as well as in which sequence. Instead, the SOAR cognitive architecture acts as the reasoner by selecting which action the robot should complete, addressing it towards the goal. Our proposal allows to include new goals for the robot just by adding new skills (without the need to encode new plans). The proposed architecture has been tested on a human-sized humanoid robot, REEM, acting as a general purpose service robot.

  3. Foam: A general purpose Monte Carlo cellular algorithm

    International Nuclear Information System (INIS)

    Jadach, S.

    2002-01-01

    A general-purpose, self-adapting Monte Carlo (MC) algorithm implemented in the program Foam is described. The high efficiency of the MC, that is small maximum weight or variance of the MC weight is achieved by means of dividing the integration domain into small cells. The cells can be n-dimensional simplices, hyperrectangles or a Cartesian product of them. The grid of cells, called 'foam', is produced in the process of the binary split of the cells. The choice of the next cell to be divided and the position/direction of the division hyperplane is driven by the algorithm which optimizes the ratio of the maximum weight to the average weight or (optionally) the total variance. The algorithm is able to deal, in principle, with an arbitrary pattern of the singularities in the distribution. (author)

  4. Foam A General purpose Monte Carlo Cellular Algorithm

    CERN Document Server

    Jadach, Stanislaw

    2002-01-01

    A general-purpose, self-adapting Monte Carlo (MC) algorithm implemented in the program {\\tt Foam} is described. The high efficiency of the MC, that is small maximum weight or variance of the MC weight is achieved by means of dividing the integration domain into small cells. The cells can be $n$-dimensional simplices, hyperrectangles or a Cartesian product of them. The grid of cells, ``foam'', is produced in the process of the binary split of the cells. The next cell to be divided and the position/direction of the division hyperplane is chosen by the algorithm which optimizes the ratio of the maximum weight to the average weight or (optionally) the total variance. The algorithm is able to deal, in principle, with an arbitrary pattern of the singularities in the distribution.

  5. General-purpose software for science technology calculation

    International Nuclear Information System (INIS)

    Aikawa, Hiroshi

    1999-01-01

    We have developed many general-purpose softwares for parallel processing of science technology calculation. This paper reported six softwares such as STA (Seamless Thinking Aid) basic soft, parallel numerical computation library, grid formation software for parallel computer, real-time visualizing system, parallel benchmark test system and object-oriented parallel programing method. STA is a user interface software to perform a total environment for parallel programing, a network computing environment for various parallel computers and a desktop computing environment via Web. Some examples using the above softwares are explained. One of them is a simultaneous parallel calculation of both analysis of flow and structure of supersonic transport to design of them. The other is various kinds of computer parallel calculations for nuclear fusion reaction such as a molecular dynamic calculation and a calculation of reactor structure and fluid. These softs are opened to the public by the home page {http://guide.tokai.jaeri.go.jp/ccse/}. (S.Y.)

  6. The Efficiency of Linda for General Purpose Scientific Programming

    Directory of Open Access Journals (Sweden)

    Timothy G. Mattson

    1994-01-01

    Full Text Available Linda (Linda is a registered trademark of Scientific Computing Associates, Inc. is a programming language for coordinating the execution and interaction of processes. When combined with a language for computation (such as C or Fortran, the resulting hybrid language can be used to write portable programs for parallel and distributed multiple instruction multiple data (MIMD computers. The Linda programming model is based on operations that read, write, and erase a virtual shared memory. It is easy to use, and lets the programmer code in a very expressive, uncoupled programming style. These benefits, however, are of little value unless Linda programs execute efficiently. The goal of this article is to demonstrate that Linda programs are efficient making Linda an effective general purpose tool for programming MIMD parallel computers. Two arguments for Linda's efficiency are given; the first is based on Linda's implementation and the second on a range of case studies spanning a complete set of parallel algorithm classes.

  7. Selecting a general-purpose data compression algorithm

    Science.gov (United States)

    Mathews, Gary Jason

    1995-01-01

    The National Space Science Data Center's Common Data Formate (CDF) is capable of storing many types of data such as scalar data items, vectors, and multidimensional arrays of bytes, integers, or floating point values. However, regardless of the dimensionality and data type, the data break down into a sequence of bytes that can be fed into a data compression function to reduce the amount of data without losing data integrity and thus remaining fully reconstructible. Because of the diversity of data types and high performance speed requirements, a general-purpose, fast, simple data compression algorithm is required to incorporate data compression into CDF. The questions to ask are how to evaluate and compare compression algorithms, and what compression algorithm meets all requirements. The object of this paper is to address these questions and determine the most appropriate compression algorithm to use within the CDF data management package that would be applicable to other software packages with similar data compression needs.

  8. Alternative Metrics ("Altmetrics") for Assessing Article Impact in Popular General Radiology Journals.

    Science.gov (United States)

    Rosenkrantz, Andrew B; Ayoola, Abimbola; Singh, Kush; Duszak, Richard

    2017-07-01

    Emerging alternative metrics leverage social media and other online platforms to provide immediate measures of biomedical articles' reach among diverse public audiences. We aimed to compare traditional citation and alternative impact metrics for articles in popular general radiology journals. All 892 original investigations published in 2013 issues of Academic Radiology, American Journal of Roentgenology, Journal of the American College of Radiology, and Radiology were included. Each article's content was classified as imaging vs nonimaging. Traditional journal citations to articles were obtained from Web of Science. Each article's Altmetric Attention Score (Altmetric), representing weighted mentions across a variety of online platforms, was obtained from Altmetric.com. Statistical assessment included the McNemar test, the Mann-Whitney test, and the Pearson correlation. Mean and median traditional citation counts were 10.7 ± 15.4 and 5 vs 3.3 ± 13.3 and 0 for Altmetric. Among all articles, 96.4% had ≥1 traditional citation vs 41.8% for Altmetric (P nonimaging content (11.5 ± 16.2 vs 6.9 ± 9.8, P nonimaging content (5.1 ± 11.1 vs 2.8 ± 13.7, P = 0.006). Although overall online attention to radiology journal content was low, alternative metrics exhibited unique trends, particularly for nonclinical articles, and may provide a complementary measure of radiology research impact compared to traditional citation counts. Copyright © 2017 The Association of University Radiologists. Published by Elsevier Inc. All rights reserved.

  9. General Purpose Technologies and their Implications for International Trade

    Directory of Open Access Journals (Sweden)

    Petsas Iordanis

    2015-09-01

    Full Text Available This paper develops a simple model of trade and “quality-ladders” growth without scale effects to study the implications of general purpose technologies (GPTs for international trade. GPTs refer to a certain type of drastic innovations, such as electrification, the transistor, and the Internet, that are characterized by the pervasiveness in use, innovational complementarities, and technological dynamism. The model presents a two-country (Home and Foreign dynamic general equilibrium framework and incorporates GPT diffusion within Home that exhibits endogenous Schumpeterian growth. The model analyzes the long-run and transitional dynamic effects of a new GPT on the pattern of trade and relative wages. The main findings of the paper are: 1 when the GPT diffusion across industries is governed by S-curve dynamics, there are two steady-state equilibria: the initial steadystate arises before the adoption of the new GPT and the final one is reached after the GPT diffusion process has been completed, 2 when all industries at Home have adopted the new GPT, Home enjoys comparative advantage in a greater range of industries compared to Foreign, 3 during the transitional dynamics, Foreign gains back its competitiveness in some of the industries that lost its comparative advantage to Home.

  10. Use of general purpose graphics processing units with MODFLOW

    Science.gov (United States)

    Hughes, Joseph D.; White, Jeremy T.

    2013-01-01

    To evaluate the use of general-purpose graphics processing units (GPGPUs) to improve the performance of MODFLOW, an unstructured preconditioned conjugate gradient (UPCG) solver has been developed. The UPCG solver uses a compressed sparse row storage scheme and includes Jacobi, zero fill-in incomplete, and modified-incomplete lower-upper (LU) factorization, and generalized least-squares polynomial preconditioners. The UPCG solver also includes options for sequential and parallel solution on the central processing unit (CPU) using OpenMP. For simulations utilizing the GPGPU, all basic linear algebra operations are performed on the GPGPU; memory copies between the central processing unit CPU and GPCPU occur prior to the first iteration of the UPCG solver and after satisfying head and flow criteria or exceeding a maximum number of iterations. The efficiency of the UPCG solver for GPGPU and CPU solutions is benchmarked using simulations of a synthetic, heterogeneous unconfined aquifer with tens of thousands to millions of active grid cells. Testing indicates GPGPU speedups on the order of 2 to 8, relative to the standard MODFLOW preconditioned conjugate gradient (PCG) solver, can be achieved when (1) memory copies between the CPU and GPGPU are optimized, (2) the percentage of time performing memory copies between the CPU and GPGPU is small relative to the calculation time, (3) high-performance GPGPU cards are utilized, and (4) CPU-GPGPU combinations are used to execute sequential operations that are difficult to parallelize. Furthermore, UPCG solver testing indicates GPGPU speedups exceed parallel CPU speedups achieved using OpenMP on multicore CPUs for preconditioners that can be easily parallelized.

  11. The purpose of the general practice consultation from the patients perspective - theoretical aspects

    DEFF Research Database (Denmark)

    Thorsen, Hanne; Witt, Klaus; Malterud, Kirsti

    2001-01-01

    Consultation purposes, general practice, patients´expectations, patients satosfaction, patientcenteredness......Consultation purposes, general practice, patients´expectations, patients satosfaction, patientcenteredness...

  12. General-purpose event generators for LHC physics

    Energy Technology Data Exchange (ETDEWEB)

    Buckley, Andy [PPE Group, School of Physics and Astronomy, University of Edinburgh, EH25 9PN (United Kingdom); Butterworth, Jonathan [Department of Physics and Astronomy, University College London, WC1E 6BT (United Kingdom); Gieseke, Stefan [Institute for Theoretical Physics, Karlsruhe Institute of Technology, D-76128 Karlsruhe (Germany); Grellscheid, David [Institute for Particle Physics Phenomenology, Durham University, DH1 3LE (United Kingdom); Hoeche, Stefan [SLAC National Accelerator Laboratory, Menlo Park, CA 94025 (United States); Hoeth, Hendrik; Krauss, Frank [Institute for Particle Physics Phenomenology, Durham University, DH1 3LE (United Kingdom); Loennblad, Leif [Department of Astronomy and Theoretical Physics, Lund University (Sweden); PH Department, TH Unit, CERN, CH-1211 Geneva 23 (Switzerland); Nurse, Emily [Department of Physics and Astronomy, University College London, WC1E 6BT (United Kingdom); Richardson, Peter [Institute for Particle Physics Phenomenology, Durham University, DH1 3LE (United Kingdom); Schumann, Steffen [Institute for Theoretical Physics, University of Heidelberg, 69120 Heidelberg (Germany); Seymour, Michael H. [School of Physics and Astronomy, University of Manchester, M13 9PL (United Kingdom); Sjoestrand, Torbjoern [Department of Astronomy and Theoretical Physics, Lund University (Sweden); Skands, Peter [PH Department, TH Unit, CERN, CH-1211 Geneva 23 (Switzerland); Webber, Bryan, E-mail: webber@hep.phy.cam.ac.uk [Cavendish Laboratory, J.J. Thomson Avenue, Cambridge CB3 0HE (United Kingdom)

    2011-07-15

    We review the physics basis, main features and use of general-purpose Monte Carlo event generators for the simulation of proton-proton collisions at the Large Hadron Collider. Topics included are: the generation of hard scattering matrix elements for processes of interest, at both leading and next-to-leading QCD perturbative order; their matching to approximate treatments of higher orders based on the showering approximation; the parton and dipole shower formulations; parton distribution functions for event generators; non-perturbative aspects such as soft QCD collisions, the underlying event and diffractive processes; the string and cluster models for hadron formation; the treatment of hadron and tau decays; the inclusion of QED radiation and beyond Standard Model processes. We describe the principal features of the ARIADNE, Herwig++, PYTHIA 8 and SHERPA generators, together with the Rivet and Professor validation and tuning tools, and discuss the physics philosophy behind the proper use of these generators and tools. This review is aimed at phenomenologists wishing to understand better how parton-level predictions are translated into hadron-level events as well as experimentalists seeking a deeper insight into the tools available for signal and background simulation at the LHC.

  13. General-purpose event generators for LHC physics

    International Nuclear Information System (INIS)

    Buckley, Andy; Butterworth, Jonathan; Gieseke, Stefan; Grellscheid, David; Hoeche, Stefan; Hoeth, Hendrik; Krauss, Frank; Loennblad, Leif; Nurse, Emily; Richardson, Peter; Schumann, Steffen; Seymour, Michael H.; Sjoestrand, Torbjoern; Skands, Peter; Webber, Bryan

    2011-01-01

    We review the physics basis, main features and use of general-purpose Monte Carlo event generators for the simulation of proton-proton collisions at the Large Hadron Collider. Topics included are: the generation of hard scattering matrix elements for processes of interest, at both leading and next-to-leading QCD perturbative order; their matching to approximate treatments of higher orders based on the showering approximation; the parton and dipole shower formulations; parton distribution functions for event generators; non-perturbative aspects such as soft QCD collisions, the underlying event and diffractive processes; the string and cluster models for hadron formation; the treatment of hadron and tau decays; the inclusion of QED radiation and beyond Standard Model processes. We describe the principal features of the ARIADNE, Herwig++, PYTHIA 8 and SHERPA generators, together with the Rivet and Professor validation and tuning tools, and discuss the physics philosophy behind the proper use of these generators and tools. This review is aimed at phenomenologists wishing to understand better how parton-level predictions are translated into hadron-level events as well as experimentalists seeking a deeper insight into the tools available for signal and background simulation at the LHC.

  14. A VMEbus general-purpose data acquisition system

    International Nuclear Information System (INIS)

    Ninane, A.; Nemry, M.; Martou, J.L.; Somers, F.

    1992-01-01

    We present a general-purpose, VMEbus based, multiprocessor data acquisition and monitoring system. Events, handled by a master CPU, are kept at the disposal of data storage and monitoring processes which can run on distinct processors. They access either the complete set of data or a fraction of them, minimizing the acquisition dead-time. The system is built with the VxWorks 5.0 real time kernel to which we have added device drivers for data acquisition and monitoring. The acquisition is controlled and the data are displayed on a workstation. The user interface is written in C ++ and re-uses the classes of the Interviews and the NIH libraries. The communication between the control workstation and the VMEbus processors is made through SUN RPCs on an Ethernet link. The system will be used for, CAMAC based, data acquisition for nuclear physics experiments as well as for the VXI data taking with the 4π configuration (100 neutron detectors) of the Brussels-Caen-Louvian-Strasbourg DEMON collaboration. (author)

  15. High-Speed General Purpose Genetic Algorithm Processor.

    Science.gov (United States)

    Hoseini Alinodehi, Seyed Pourya; Moshfe, Sajjad; Saber Zaeimian, Masoumeh; Khoei, Abdollah; Hadidi, Khairollah

    2016-07-01

    In this paper, an ultrafast steady-state genetic algorithm processor (GAP) is presented. Due to the heavy computational load of genetic algorithms (GAs), they usually take a long time to find optimum solutions. Hardware implementation is a significant approach to overcome the problem by speeding up the GAs procedure. Hence, we designed a digital CMOS implementation of GA in [Formula: see text] process. The proposed processor is not bounded to a specific application. Indeed, it is a general-purpose processor, which is capable of performing optimization in any possible application. Utilizing speed-boosting techniques, such as pipeline scheme, parallel coarse-grained processing, parallel fitness computation, parallel selection of parents, dual-population scheme, and support for pipelined fitness computation, the proposed processor significantly reduces the processing time. Furthermore, by relying on a built-in discard operator the proposed hardware may be used in constrained problems that are very common in control applications. In the proposed design, a large search space is achievable through the bit string length extension of individuals in the genetic population by connecting the 32-bit GAPs. In addition, the proposed processor supports parallel processing, in which the GAs procedure can be run on several connected processors simultaneously.

  16. Interfacial Properties of EXXPRO(TM) and General Purpose Elastomers

    Science.gov (United States)

    Zhang, Y.; Rafailovich, M.; Sokolov, Jon; Qu, S.; Ge, S.; Ngyuen, D.; Li, Z.; Peiffer, D.; Song, L.; Dias, J. A.; McElrath, K. O.

    1998-03-01

    EXXPRO(Trademark) elastomers are used for tires and many other applications. This elastomer (denoted as BIMS) is a random copolymer of p-methylstyrene (MS) and polyisobutylene (I) with varying degrees of PMS content and bromination (B) on the p-methyl group. BIMS is impermeable to gases, and has good heat, ozone and flex resistance. Very often general purpose elastomers are blended with BIMS. The interfacial width between polybutadiene and BIMS is a sensitive function of the Br level and PMS content. By neutron reflectivity (NR), we studied the dynamics of interface formation as a function of time and temperature for BIMS with varying degrees of PMS and Br. We found that in addition to the bulk parameters, the total film thickness and the proximity of an interactive surface can affect the interfacial interaction rates. The interfacial properties can also be modified by inclusion of particles, such as carbon black (a filler component in tire rubbers). Results will be presented on the relation between the interfacial width as measured by NR and compatibilization studies via AFM and LFM.

  17. General-purpose event generators for LHC physics

    Energy Technology Data Exchange (ETDEWEB)

    Buckley, Andy; /Edinburgh U.; Butterworth, Jonathan; /University Coll. London; Gieseke, Stefan; /Karlsruhe U., ITP; Grellscheid, David; /Durham U., IPPP; Hoche, Stefan; /SLAC; Hoeth, Hendrik; Krauss, Frank; /Durham U., IPPP; Lonnblad, Leif; /Lund U., Dept. Theor. Phys. /CERN; Nurse, Emily; /University Coll. London; Richardson, Peter; /Durham U., IPPP; Schumann, Steffen; /Heidelberg U.; Seymour, Michael H.; /Manchester U.; Sjostrand, Torbjorn; /Lund U., Dept. Theor. Phys.; Skands, Peter; /CERN; Webber, Bryan; /Cambridge U.

    2011-03-03

    We review the physics basis, main features and use of general-purpose Monte Carlo event generators for the simulation of proton-proton collisions at the Large Hadron Collider. Topics included are: the generation of hard-scattering matrix elements for processes of interest, at both leading and next-to-leading QCD perturbative order; their matching to approximate treatments of higher orders based on the showering approximation; the parton and dipole shower formulations; parton distribution functions for event generators; non-perturbative aspects such as soft QCD collisions, the underlying event and diffractive processes; the string and cluster models for hadron formation; the treatment of hadron and tau decays; the inclusion of QED radiation and beyond-Standard-Model processes. We describe the principal features of the Ariadne, Herwig++, Pythia 8 and Sherpa generators, together with the Rivet and Professor validation and tuning tools, and discuss the physics philosophy behind the proper use of these generators and tools. This review is aimed at phenomenologists wishing to understand better how parton-level predictions are translated into hadron-level events as well as experimentalists wanting a deeper insight into the tools available for signal and background simulation at the LHC.

  18. Foam A General Purpose Cellular Monte Carlo Event Generator

    CERN Document Server

    Jadach, Stanislaw

    2003-01-01

    A general purpose, self-adapting, Monte Carlo (MC) event generator (simulator) is described. The high efficiency of the MC, that is small maximum weight or variance of the MC weight is achieved by means of dividing the integration domain into small cells. The cells can be $n$-dimensional simplices, hyperrectangles or Cartesian product of them. The grid of cells, called ``foam'', is produced in the process of the binary split of the cells. The choice of the next cell to be divided and the position/direction of the division hyper-plane is driven by the algorithm which optimizes the ratio of the maximum weight to the average weight or (optionally) the total variance. The algorithm is able to deal, in principle, with an arbitrary pattern of the singularities in the distribution. As any MC generator, it can also be used for the MC integration. With the typical personal computer CPU, the program is able to perform adaptive integration/simulation at relatively small number of dimensions ($\\leq 16$). With the continu...

  19. Generalized Fluid System Simulation Program (GFSSP) Version 6 - General Purpose Thermo-Fluid Network Analysis Software

    Science.gov (United States)

    Majumdar, Alok; Leclair, Andre; Moore, Ric; Schallhorn, Paul

    2011-01-01

    GFSSP stands for Generalized Fluid System Simulation Program. It is a general-purpose computer program to compute pressure, temperature and flow distribution in a flow network. GFSSP calculates pressure, temperature, and concentrations at nodes and calculates flow rates through branches. It was primarily developed to analyze Internal Flow Analysis of a Turbopump Transient Flow Analysis of a Propulsion System. GFSSP development started in 1994 with an objective to provide a generalized and easy to use flow analysis tool for thermo-fluid systems.

  20. SNAP: A General Purpose Network Analysis and Graph Mining Library.

    Science.gov (United States)

    Leskovec, Jure; Sosič, Rok

    2016-10-01

    Large networks are becoming a widely used abstraction for studying complex systems in a broad set of disciplines, ranging from social network analysis to molecular biology and neuroscience. Despite an increasing need to analyze and manipulate large networks, only a limited number of tools are available for this task. Here, we describe Stanford Network Analysis Platform (SNAP), a general-purpose, high-performance system that provides easy to use, high-level operations for analysis and manipulation of large networks. We present SNAP functionality, describe its implementational details, and give performance benchmarks. SNAP has been developed for single big-memory machines and it balances the trade-off between maximum performance, compact in-memory graph representation, and the ability to handle dynamic graphs where nodes and edges are being added or removed over time. SNAP can process massive networks with hundreds of millions of nodes and billions of edges. SNAP offers over 140 different graph algorithms that can efficiently manipulate large graphs, calculate structural properties, generate regular and random graphs, and handle attributes and meta-data on nodes and edges. Besides being able to handle large graphs, an additional strength of SNAP is that networks and their attributes are fully dynamic, they can be modified during the computation at low cost. SNAP is provided as an open source library in C++ as well as a module in Python. We also describe the Stanford Large Network Dataset, a set of social and information real-world networks and datasets, which we make publicly available. The collection is a complementary resource to our SNAP software and is widely used for development and benchmarking of graph analytics algorithms.

  1. The Hamiltonian of Einstein affine-metric formulation of general relativity

    International Nuclear Information System (INIS)

    Kiriushcheva, N.; Kuzmin, S.V.

    2010-01-01

    It is shown that the Hamiltonian of the Einstein affine-metric (first-order) formulation of General Relativity (GR) leads to a constraint structure that allows the restoration of its unique gauge invariance, four-diffeomorphism, without the need of any field dependent redefinition of gauge parameters as in the case of the second-order formulation. In the second-order formulation of ADM gravity the need for such a redefinition is the result of the non-canonical change of variables (Xiv:0809.0097). For the first-order formulation, the necessity of such a redefinition ''to correspond to diffeomorphism invariance'' (reported by Ghalati, arXiv:0901.3344) is just an artifact of using the Henneaux-Teitelboim-Zanelli ansatz (Nucl. Phys. B 332:169, 1990), which is sensitive to the choice of linear combination of tertiary constraints. This ansatz cannot be used as an algorithm for finding a gauge invariance, which is a unique property of a physical system, and it should not be affected by different choices of linear combinations of non-primary first class constraints. The algorithm of Castellani (Ann. Phys. 143:357, 1982) is free from such a deficiency and it leads directly to four-diffeomorphism invariance for first, as well as for second-order Hamiltonian formulations of GR. The distinct role of primary first class constraints, the effect of considering different linear combinations of constraints, the canonical transformations of phase-space variables, and their interplay are discussed in some detail for Hamiltonians of the second- and first-order formulations of metric GR. The first-order formulation of Einstein-Cartan theory, which is the classical background of Loop Quantum Gravity, is also discussed. (orig.)

  2. 21 CFR 880.6890 - General purpose disinfectants.

    Science.gov (United States)

    2010-04-01

    ... (CONTINUED) MEDICAL DEVICES GENERAL HOSPITAL AND PERSONAL USE DEVICES General Hospital and Personal Use... disinfectant is a germicide intended to process noncritical medical devices and equipment surfaces. A general... prior to terminal sterilization or high level disinfection. Noncritical medical devices make only...

  3. SPIDR, a general-purpose readout system for pixel ASICs

    International Nuclear Information System (INIS)

    Heijden, B. van der; Visser, J.; Beuzekom, M. van; Boterenbrood, H.; Munneke, B.; Schreuder, F.; Kulis, S.

    2017-01-01

    The SPIDR (Speedy PIxel Detector Readout) system is a flexible general-purpose readout platform that can be easily adapted to test and characterize new and existing detector readout ASICs. It is originally designed for the readout of pixel ASICs from the Medipix/Timepix family, but other types of ASICs or front-end circuits can be read out as well. The SPIDR system consists of an FPGA board with memory and various communication interfaces, FPGA firmware, CPU subsystem and an API library on the PC . The FPGA firmware can be adapted to read out other ASICs by re-using IP blocks. The available IP blocks include a UDP packet builder, 1 and 10 Gigabit Ethernet MAC's and a 'soft core' CPU . Currently the firmware is targeted at the Xilinx VC707 development board and at a custom board called Compact-SPIDR . The firmware can easily be ported to other Xilinx 7 series and ultra scale FPGAs. The gap between an ASIC and the data acquisition back-end is bridged by the SPIDR system. Using the high pin count VITA 57 FPGA Mezzanine Card (FMC) connector only a simple chip carrier PCB is required. A 1 and a 10 Gigabit Ethernet interface handle the connection to the back-end. These can be used simultaneously for high-speed data and configuration over separate channels. In addition to the FMC connector, configurable inputs and outputs are available for synchronization with other detectors. A high resolution (≈ 27 ps bin size) Time to Digital converter is provided for time stamping events in the detector. The SPIDR system is frequently used as readout for the Medipix3 and Timepix3 ASICs. Using the 10 Gigabit Ethernet interface it is possible to read out a single chip at full bandwidth or up to 12 chips at a reduced rate. Another recent application is the test-bed for the VeloPix ASIC, which is developed for the Vertex Detector of the LHCb experiment. In this case the SPIDR system processes the 20 Gbps scrambled data stream from the VeloPix and distributes it over four

  4. A damage mechanics based general purpose interface/contact element

    Science.gov (United States)

    Yan, Chengyong

    laboratory test data presented in the literature. The results demonstrate that the proposed element and the damage law perform very well. The most important scientific contribution of this dissertation is the proposed damage criterion based on second law of thermodynamic and entropy of the system. The proposed general purpose interface/contact element is another contribution of this research. Compared to the previous adhoc interface elements proposed in the literature, the new one is, much more powerful and includes creep, plastic deformations, sliding, temperature, damage, cyclic behavior and fatigue life in a unified formulation.

  5. CLOUDCLOUD : general-purpose instrument monitoring and data managing software

    Science.gov (United States)

    Dias, António; Amorim, António; Tomé, António

    2016-04-01

    An effective experiment is dependent on the ability to store and deliver data and information to all participant parties regardless of their degree of involvement in the specific parts that make the experiment a whole. Having fast, efficient and ubiquitous access to data will increase visibility and discussion, such that the outcome will have already been reviewed several times, strengthening the conclusions. The CLOUD project aims at providing users with a general purpose data acquisition, management and instrument monitoring platform that is fast, easy to use, lightweight and accessible to all participants of an experiment. This work is now implemented in the CLOUD experiment at CERN and will be fully integrated with the experiment as of 2016. Despite being used in an experiment of the scale of CLOUD, this software can also be used in any size of experiment or monitoring station, from single computers to large networks of computers to monitor any sort of instrument output without influencing the individual instrument's DAQ. Instrument data and meta data is stored and accessed via a specially designed database architecture and any type of instrument output is accepted using our continuously growing parsing application. Multiple databases can be used to separate different data taking periods or a single database can be used if for instance an experiment is continuous. A simple web-based application gives the user total control over the monitored instruments and their data, allowing data visualization and download, upload of processed data and the ability to edit existing instruments or add new instruments to the experiment. When in a network, new computers are immediately recognized and added to the system and are able to monitor instruments connected to them. Automatic computer integration is achieved by a locally running python-based parsing agent that communicates with a main server application guaranteeing that all instruments assigned to that computer are

  6. 7 CFR 249.1 - General purpose and scope.

    Science.gov (United States)

    2010-01-01

    ... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS SENIOR FARMERS' MARKET NUTRITION PROGRAM (SFMNP) General § 249.1 General.... 2011, et seq.), and to any other Federal or State food or nutrition assistance program under which...

  7. On the strong metric dimension of generalized butterfly graph, starbarbell graph, and {C}_{m}\\odot {P}_{n} graph

    Science.gov (United States)

    Yunia Mayasari, Ratih; Atmojo Kusmayadi, Tri

    2018-04-01

    Let G be a connected graph with vertex set V(G) and edge set E(G). For every pair of vertices u,v\\in V(G), the interval I[u, v] between u and v to be the collection of all vertices that belong to some shortest u ‑ v path. A vertex s\\in V(G) strongly resolves two vertices u and v if u belongs to a shortest v ‑ s path or v belongs to a shortest u ‑ s path. A vertex set S of G is a strong resolving set of G if every two distinct vertices of G are strongly resolved by some vertex of S. The strong metric basis of G is a strong resolving set with minimal cardinality. The strong metric dimension sdim(G) of a graph G is defined as the cardinality of strong metric basis. In this paper we determine the strong metric dimension of a generalized butterfly graph, starbarbell graph, and {C}mȯ {P}n graph. We obtain the strong metric dimension of generalized butterfly graph is sdim(BFn ) = 2n ‑ 2. The strong metric dimension of starbarbell graph is sdim(S{B}{m1,{m}2,\\ldots,{m}n})={\\sum }i=1n({m}i-1)-1. The strong metric dimension of {C}mȯ {P}n graph are sdim({C}mȯ {P}n)=2m-1 for m > 3 and n = 2, and sdim({C}mȯ {P}n)=2m-2 for m > 3 and n > 2.

  8. 7 CFR 210.1 - General purpose and scope.

    Science.gov (United States)

    2010-01-01

    ... general and special cash assistance and donations of foods acquired by the Department to be used to assist..., preparation and service of nutritious lunches, payment of funds, use of program funds, program monitoring, and...

  9. RoboCon: A general purpose telerobotic control center

    International Nuclear Information System (INIS)

    Draper, J.V.; Noakes, M.W.; Blair, L.M.

    1997-01-01

    This report describes human factors issues involved in the design of RoboCon, a multi-purpose control center for use in US Department of Energy remote handling applications. RoboCon is intended to be a flexible, modular control center capable of supporting a wide variety of robotic devices

  10. RoboCon: A general purpose telerobotic control center

    Energy Technology Data Exchange (ETDEWEB)

    Draper, J.V.; Noakes, M.W. [Oak Ridge National Lab., TN (United States). Robotics and Process Systems Div.; Schempf, H. [Carnegie Mellon Univ., Pittsburgh, PA (United States); Blair, L.M. [Human Machine Interfaces, Inc., Knoxville, TN (United States)

    1997-02-01

    This report describes human factors issues involved in the design of RoboCon, a multi-purpose control center for use in US Department of Energy remote handling applications. RoboCon is intended to be a flexible, modular control center capable of supporting a wide variety of robotic devices.

  11. General discussion of data quality challenges in social media metrics: Extensive comparison of four major altmetric data aggregators

    Science.gov (United States)

    2018-01-01

    The data collection and reporting approaches of four major altmetric data aggregators are studied. The main aim of this study is to understand how differences in social media tracking and data collection methodologies can have effects on the analytical use of altmetric data. For this purpose, discrepancies in the metrics across aggregators have been studied in order to understand how the methodological choices adopted by these aggregators can explain the discrepancies found. Our results show that different forms of accessing the data from diverse social media platforms, together with different approaches of collecting, processing, summarizing, and updating social media metrics cause substantial differences in the data and metrics offered by these aggregators. These results highlight the importance that methodological choices in the tracking, collecting, and reporting of altmetric data can have in the analytical value of the data. Some recommendations for altmetric users and data aggregators are proposed and discussed. PMID:29772003

  12. General Purpose Segmentation for Microorganisms in Microscopy Images

    DEFF Research Database (Denmark)

    Jensen, Sebastian H. Nesgaard; Moeslund, Thomas B.; Rankl, Christian

    2014-01-01

    In this paper, we propose an approach for achieving generalized segmentation of microorganisms in mi- croscopy images. It employs a pixel-wise classification strategy based on local features. Multilayer percep- trons are utilized for classification of the local features and is trained for each sp...

  13. A general purpose tomographic program with combined inversions

    International Nuclear Information System (INIS)

    Xu Wenbin; Dong Jiafu; Li Fanzhu

    1996-01-01

    A general tomographic program has been developed by combining the Bessel expansion with the Zernicke expansion. It is useful for studying of the magnetic island structure of the tearing mode and in reconstructing the density profiles of impurities in tokamak plasmas. This combined method have the advantages of both expansions, i.e. there will be no spurious images in the edge and it will be of high inverse precision in the center of plasma

  14. Looking beyond general metrics for model comparison - lessons from an international model intercomparison study

    Science.gov (United States)

    de Boer-Euser, Tanja; Bouaziz, Laurène; De Niel, Jan; Brauer, Claudia; Dewals, Benjamin; Drogue, Gilles; Fenicia, Fabrizio; Grelier, Benjamin; Nossent, Jiri; Pereira, Fernando; Savenije, Hubert; Thirel, Guillaume; Willems, Patrick

    2017-01-01

    International collaboration between research institutes and universities is a promising way to reach consensus on hydrological model development. Although model comparison studies are very valuable for international cooperation, they do often not lead to very clear new insights regarding the relevance of the modelled processes. We hypothesise that this is partly caused by model complexity and the comparison methods used, which focus too much on a good overall performance instead of focusing on a variety of specific events. In this study, we use an approach that focuses on the evaluation of specific events and characteristics. Eight international research groups calibrated their hourly model on the Ourthe catchment in Belgium and carried out a validation in time for the Ourthe catchment and a validation in space for nested and neighbouring catchments. The same protocol was followed for each model and an ensemble of best-performing parameter sets was selected. Although the models showed similar performances based on general metrics (i.e. the Nash-Sutcliffe efficiency), clear differences could be observed for specific events. We analysed the hydrographs of these specific events and conducted three types of statistical analyses on the entire time series: cumulative discharges, empirical extreme value distribution of the peak flows and flow duration curves for low flows. The results illustrate the relevance of including a very quick flow reservoir preceding the root zone storage to model peaks during low flows and including a slow reservoir in parallel with the fast reservoir to model the recession for the studied catchments. This intercomparison enhanced the understanding of the hydrological functioning of the catchment, in particular for low flows, and enabled to identify present knowledge gaps for other parts of the hydrograph. Above all, it helped to evaluate each model against a set of alternative models.

  15. MONK - a general purpose Monte Carlo neutronics program

    International Nuclear Information System (INIS)

    Sherriffs, V.S.W.

    1978-01-01

    MONK is a Monte Carlo neutronics code written principally for criticality calculations relevant to the transport, storage, and processing of fissile material. The code exploits the ability of the Monte Carlo method to represent complex shapes with very great accuracy. The nuclear data used is derived from the UK Nuclear Data File processed to the required format by a subsidiary program POND. A general description is given of the MONK code together with the subsidiary program SCAN which produces diagrams of the system specified. Details of the data input required by MONK and SCAN are also given. (author)

  16. An embedded domain specific language for general purpose vectorization

    CERN Document Server

    Karpinski, Przemyslaw

    2017-01-01

    Portable SIMD code generation is an open problem in modern High Performance Computing systems. Performance portability can already be achieved, however it might fail when user-framework interaction is required. Of all portable vectorization techniques, explicit vectorization, using wrapper-class libraries, is proven to achieve the fastest performance, however it does not exploit optimization opportunities outside the simplest algebraic primitives. A more advanced language is therefore required, but the design of a new independent language is not feasible due to its high costs. This work describes an Embedded Domain Specific Language for solving generalized 1-D vectorization problems. The language is implemented using C++ as a host language and published as a lightweight library. By decoupling expression creation from evaluation a wider range of problems can be solved, without sacrificing runtime efficiency. In this paper we discuss design patterns necessary, but not limited, to efficient EDSL implementatio...

  17. GENERAL ASPECTS AND PURPOSE OF THE CONSUMMATION CONTRACT

    Directory of Open Access Journals (Sweden)

    Alexandru MATEESCU

    2015-07-01

    Full Text Available The current paper mainly tackles the consummation contract and the ways in which it forms, adjusts and helps the citizen, in the general frame of the consumer’s rights. The consummation contract is a legal instrument for institutionalizing the commercial operations between a professional and the consumer. This type of instrument has been especially created to help the citizen in being adequately treated both correctly and adequately in all consummation matters. In the 20th century, the need to bring the commercial relations between professionals and citizens under regulation became imperative. Taking into account the socio-humanistic development rhythm, the consummation contact became a way of guaranteeing for the citizens’ rights in consummation matters and, at the same time, it confers a legal frame to guide and direct the merchants. Since 2007, the year when Romania adhered the European Union, the consumers’ rights became even more important, as the fact that the European Union focuses on the rights of all its citizens and the way in which they are treated by the merchants from a commercial point of view, was widely recognized. Once Romania adhered to a commercial frame which embeds over 500 million inhabitants, the dimension of the rights and obligations regarding consummation became an ever stronger argument in bringing the legislation under regulation. Eventually, clarifying the principles that founded the consummation contract will determine the legal frame in which it revolves and will bring to light the utility it has for the citizens, its subsequent employments and all things that should be further added to it in order to ensure an even better protection and settlement, in legal terms, of the commercial relations between a merchant and one or more citizens.

  18. Trace anomaly of the stress-energy tensor for massless vector particles propagating in a general background metric

    International Nuclear Information System (INIS)

    Adler, S.L.; Lieberman, J.

    1978-01-01

    We reanalyze the problem of regularization of the stress-energy tensor for massless vector particles propating in a general background metric, using covariant point separation techniques applied to the Hadamard elementary solution. We correct an error, point out by Wald, in the earlier formulation of Adler, Lieberman, and Ng, and find a stress-energy tensor trace anomaly agreeing with that found by other regularization methods

  19. $\\eta$-metric structures

    OpenAIRE

    Gaba, Yaé Ulrich

    2017-01-01

    In this paper, we discuss recent results about generalized metric spaces and fixed point theory. We introduce the notion of $\\eta$-cone metric spaces, give some topological properties and prove some fixed point theorems for contractive type maps on these spaces. In particular we show that theses $\\eta$-cone metric spaces are natural generalizations of both cone metric spaces and metric type spaces.

  20. Metrics of quantum states

    International Nuclear Information System (INIS)

    Ma Zhihao; Chen Jingling

    2011-01-01

    In this work we study metrics of quantum states, which are natural generalizations of the usual trace metric and Bures metric. Some useful properties of the metrics are proved, such as the joint convexity and contractivity under quantum operations. Our result has a potential application in studying the geometry of quantum states as well as the entanglement detection.

  1. Cyber threat metrics.

    Energy Technology Data Exchange (ETDEWEB)

    Frye, Jason Neal; Veitch, Cynthia K.; Mateski, Mark Elliot; Michalski, John T.; Harris, James Mark; Trevino, Cassandra M.; Maruoka, Scott

    2012-03-01

    Threats are generally much easier to list than to describe, and much easier to describe than to measure. As a result, many organizations list threats. Fewer describe them in useful terms, and still fewer measure them in meaningful ways. This is particularly true in the dynamic and nebulous domain of cyber threats - a domain that tends to resist easy measurement and, in some cases, appears to defy any measurement. We believe the problem is tractable. In this report we describe threat metrics and models for characterizing threats consistently and unambiguously. The purpose of this report is to support the Operational Threat Assessment (OTA) phase of risk and vulnerability assessment. To this end, we focus on the task of characterizing cyber threats using consistent threat metrics and models. In particular, we address threat metrics and models for describing malicious cyber threats to US FCEB agencies and systems.

  2. Are Current Physical Match Performance Metrics in Elite Soccer Fit for Purpose or is the Adoption of an Integrated Approach Needed?

    Science.gov (United States)

    Bradley, Paul S; Ade, Jack D

    2018-01-18

    Time-motion analysis is a valuable data-collection technique used to quantify the physical match performance of elite soccer players. For over 40 years researchers have adopted a 'traditional' approach when evaluating match demands by simply reporting the distance covered or time spent along a motion continuum of walking through to sprinting. This methodology quantifies physical metrics in isolation without integrating other factors and this ultimately leads to a one-dimensional insight into match performance. Thus, this commentary proposes a novel 'integrated' approach that focuses on a sensitive physical metric such as high-intensity running but contextualizes this in relation to key tactical activities for each position and collectively for the team. In the example presented, the 'integrated' model clearly unveils the unique high-intensity profile that exists due to distinct tactical roles, rather than one-dimensional 'blind' distances produced by 'traditional' models. Intuitively this innovative concept may aid the coaches understanding of the physical performance in relation to the tactical roles and instructions given to the players. Additionally, it will enable practitioners to more effectively translate match metrics into training and testing protocols. This innovative model may well aid advances in other team sports that incorporate similar intermittent movements with tactical purpose. Evidence of the merits and application of this new concept are needed before the scientific community accepts this model as it may well add complexity to an area that conceivably needs simplicity.

  3. Lipseys Quest for the Micro-foundations of GPT-the General Purpose Engine

    NARCIS (Netherlands)

    Van der Kooij, B.J.G.

    2016-01-01

    The construct of the General Purpose Technology misses its micro-foundation (as observed by Richard Lipsey). We present a possible solution in the General Purpose Engines. These are the basic innovations and the clusters of contributing and derived innovation, that appear in a Schumpeterian 'cluster

  4. 78 FR 65300 - Notice of Availability (NOA) for General Purpose Warehouse and Information Technology Center...

    Science.gov (United States)

    2013-10-31

    ... (NOA) for General Purpose Warehouse and Information Technology Center Construction (GPW/IT)--Tracy Site... proposed action to construct a General Purpose Warehouse and Information Technology Center at Defense..., Suite 02G09, Alexandria, VA 22350- 3100. FOR FURTHER INFORMATION CONTACT: Ann Engelberger at (703) 767...

  5. An Aerodynamic Database for the Mk 82 General Purpose Low Drag Bomb

    National Research Council Canada - National Science Library

    Krishnamoorthy, L

    1997-01-01

    The drag database of the Mk 82 General Purpose Low Drag bomb, the primary gravity weapon in the RAAF inventory, has some shortcomings in the quality and traceability of data, and in the variations due...

  6. Implementation elements for conversion of general-purpose freeway lane into high-occupancy-vehicle lane

    Science.gov (United States)

    1997-01-01

    Conversion of a general-purpose freeway into a high-occupancy-vehicle (HOV) lane is an alternative to infrastructure addition for HOV system implementation. Research indicates that lane conversion is feasible technically if sufficient HOV usage and m...

  7. Low Overhead Real-Time Computing With General Purpose Operating Systems

    National Research Council Canada - National Science Library

    Raymond, Michael

    2004-01-01

    .... In larger systems and more recently, general-purpose operating systems such as SGI IRIX and Linux are used for new projects because they already have multiprocessor and device driver support as well a large user base...

  8. 24 CFR 990.310 - Purpose-General policy on financial management, monitoring and reporting.

    Science.gov (United States)

    2010-04-01

    ... Management Systems, Monitoring, and Reporting § 990.310 Purpose—General policy on financial management, monitoring and reporting. All PHA financial management systems, reporting, and monitoring of program... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Purpose-General policy on financial...

  9. [Violence for educational purpose: Representations of general practitioners in the Paris area, France. A qualitative study].

    Science.gov (United States)

    de Brie, Claire; Piet, Emmanuelle; Chariot, Patrick

    2018-03-01

    Violence for educational purpose refers to a modality of education that includes threats, verbal abuse, physical abuse and humiliations. Twenty European countries, not including France, have abolished corporal punishment through explicit laws and regulations. The position of general practitioners in the screening and care of violence for educational purpose in France is unknown. In this study, we aimed to assess the representations of this form of violence among general practitioners. We have performed semi-directed interviews of general practitioners in the Paris, France region (Île-de-France). Interviews were conducted until data saturation was achieved. Interviews were recorded, transcribed and analysed by two investigators. Interviews were conducted with 20 physicians (November 2015-January 2016). General practitioners considered that physical, verbal or psychological abuse had possible negative consequences on children. Uncertainty regarding the consequences of violence was a cause of tolerance towards violence for educational purpose, depending on the act committed and the context, as perceived by nearly all practitioners. General practitioners expressed interest in the field. They cited their own education and experience as the main obstacles to action. Most of them expressed a feeling of failure when they screened or took care of violence for educational purpose. This study suggests that doctors can participate in supporting the parents in the prevention of violence for educational purpose. Support to parents would need specific medical training as well as a societal change. Copyright © 2018 Elsevier Masson SAS. All rights reserved.

  10. Design of a general purpose (RS-232C) analog-to-digital data converter

    International Nuclear Information System (INIS)

    Ali, Q.

    1995-01-01

    The purpose of this project is to design a general purpose hardware that interfaces analog devices with any desirable computer supporting the RS-232 interface. The hardware incorporates bidirectional data transmission at 1,200 bps, 2,400 bps, 4800 bps, 9,600 bps, 19,200 pbs and 38400 bps. The communication / processing software has been written in C language that incorporates the idea of the potability of the software from one environment to the other. (author)

  11. Design of low-cost general purpose microcontroller based neuromuscular stimulator.

    Science.gov (United States)

    Koçer, S; Rahmi Canal, M; Güler, I

    2000-04-01

    In this study, a general purpose, low-cost, programmable, portable and high performance stimulator is designed and implemented. For this purpose, a microcontroller is used in the design of the stimulator. The duty cycle and amplitude of the designed system can be controlled using a keyboard. The performance test of the system has shown that the results are reliable. The overall system can be used as the neuromuscular stimulator under safe conditions.

  12. Catalog of physical protection equipment. Book 3: Volume VII. General purpose display components

    International Nuclear Information System (INIS)

    1977-06-01

    A catalog of commercially available physical protection equipment has been prepared under MITRE contract AT(49-24)-0376 for use by the U. S. Nuclear Regulatory Commission (NRC). Included is information on barrier structures and equipment, interior and exterior intrusion detection sensors, entry (access) control devices, surveillance and alarm assessment equipment, contraband detection sensors, automated response equipment, general purpose displays and general purpose communications, with one volume devoted to each of these eight areas. For each item of equipment the information included consists of performance, physical, cost and supply/logistics data. The entire catalog is contained in three notebooks for ease in its use by licensing and inspection staff at NRC

  13. Report on the operation and utilization of general purpose use computer system 2001

    Energy Technology Data Exchange (ETDEWEB)

    Watanabe, Kunihiko; Watanabe, Reiko; Tsugawa, Kazuko; Tsuda, Kenzo; Yamamoto, Takashi; Nakamura, Osamu; Kamimura, Tetsuo [National Inst. for Fusion Science, Toki, Gifu (Japan)

    2001-09-01

    The General Purpose Use Computer System of National Institute for Fusion Science was replaced in January, 2001. The System is almost fully used after the first three months operation. Reported here is the process of the introduction of the new system and the state of the operation and utilization of the System between January and March, 2001, especially the detailed utilization of March. (author)

  14. Some thermo-electromagnetic applications to fusion technology of a general purpose CAD package

    International Nuclear Information System (INIS)

    Girdinio, P.; Molfino, P.; Molinari, G.; Raia, G.; Rosatelli, F.; Viviani, A.

    1985-01-01

    A general purpose CAD package is applied to the solution of problems related to fusion technology. The problems solved are the interacting electromagnetic and thermal fields in a resistive toroidal coil and the design of the poloidal field coils in Tokamak machines. In both cases, the procedure used is reported and the results obtained are displayed and discussed

  15. Some thermo-electromagnetic applications to fusion technology of a general purpose CAD package

    International Nuclear Information System (INIS)

    Girdinio, P.; Molfino, P.; Molinari, G.; Viviani, A.; Raia, G.; Rosatelli, F.

    1984-01-01

    A general purpose CAD package is applied to the solution of problems related to fusion technology. The problems solved are the interacting electromagnetic and thermal fields in a resistive toroidal coil and the design of the poloidal field coils in Tokamak machines. In both cases, the procedure used is reported and the results obtained are displayed and discussed. (author)

  16. BALTORO a general purpose code for coupling discrete ordinates and Monte-Carlo radiation transport calculations

    International Nuclear Information System (INIS)

    Zazula, J.M.

    1983-01-01

    The general purpose code BALTORO was written for coupling the three-dimensional Monte-Carlo /MC/ with the one-dimensional Discrete Ordinates /DO/ radiation transport calculations. The quantity of a radiation-induced /neutrons or gamma-rays/ nuclear effect or the score from a radiation-yielding nuclear effect can be analysed in this way. (author)

  17. An Evaluation of Classroom Activities and Exercises in ELT Classroom for General Purposes Course

    Science.gov (United States)

    Zohrabi, Mohammad

    2011-01-01

    It is through effective implementation of activities and exercises which students can be motivated and consequently lead to language learning. However, as an insider, the experience of teaching English for General Purposes (EGP) course indicates that it has some problems which need to be modified. In order to evaluate the EGP course,…

  18. General-purpose Monte Carlo codes for neutron and photon transport calculations. MVP version 3

    International Nuclear Information System (INIS)

    Nagaya, Yasunobu

    2017-01-01

    JAEA has developed a general-purpose neutron/photon transport Monte Carlo code MVP. This paper describes the recent development of the MVP code and reviews the basic features and capabilities. In addition, capabilities implemented in Version 3 are also described. (author)

  19. Experience of application of the general-purpose pressure and pressure drop transformers on nitrogen tetroxide

    International Nuclear Information System (INIS)

    Grishchuk, M.Kh.

    1979-01-01

    An experience of application of the general-purpose pressure and pressure drop transformers at the Nuclear Power Engineering Institute of the BSSR Academy of Sciences for measurements on nitrogen tetroxide has been described. The concrete recommendations on the types of transformers and the volume of preparational work before putting them into operation have been given

  20. A general-purpose trigger processor system and its application to fast vertex trigger

    International Nuclear Information System (INIS)

    Hazumi, M.; Banas, E.; Natkaniec, Z.; Ostrowicz, W.

    1997-12-01

    A general-purpose hardware trigger system has been developed. The system comprises programmable trigger processors and pattern generator/samplers. The hardware design of the system is described. An application as a prototype of the very fast vertex trigger in an asymmetric B-factory at KEK is also explained. (author)

  1. A general purpose program system for high energy physics experiment data acquisition and analysis

    International Nuclear Information System (INIS)

    Li Shuren; Xing Yuguo; Jin Bingnian

    1985-01-01

    This paper introduced the functions, structure and system generation of a general purpose program system (Fermilab MULTI) for high energy physics experiment data acquisition and analysis. Works concerning the reconstruction of MULTI system level 0.5 which can be run on the computer PDP-11/23 are also introduced briefly

  2. Perbandingan Kemampuan Embedded Computer dengan General Purpose Computer untuk Pengolahan Citra

    Directory of Open Access Journals (Sweden)

    Herryawan Pujiharsono

    2017-08-01

    Full Text Available Perkembangan teknologi komputer membuat pengolahan citra saat ini banyak dikembangkan untuk dapat membantu manusia di berbagai bidang pekerjaan. Namun, tidak semua bidang pekerjaan dapat dikembangkan dengan pengolahan citra karena tidak mendukung penggunaan komputer sehingga mendorong pengembangan pengolahan citra dengan mikrokontroler atau mikroprosesor khusus. Perkembangan mikrokontroler dan mikroprosesor memungkinkan pengolahan citra saat ini dapat dikembangkan dengan embedded computer atau single board computer (SBC. Penelitian ini bertujuan untuk menguji kemampuan embedded computer dalam mengolah citra dan membandingkan hasilnya dengan komputer pada umumnya (general purpose computer. Pengujian dilakukan dengan mengukur waktu eksekusi dari empat operasi pengolahan citra yang diberikan pada sepuluh ukuran citra. Hasil yang diperoleh pada penelitian ini menunjukkan bahwa optimasi waktu eksekusi embedded computer lebih baik jika dibandingkan dengan general purpose computer dengan waktu eksekusi rata-rata embedded computer adalah 4-5 kali waktu eksekusi general purpose computer dan ukuran citra maksimal yang tidak membebani CPU terlalu besar untuk embedded computer adalah 256x256 piksel dan untuk general purpose computer adalah 400x300 piksel.

  3. Application of a general purpose finite element program system in pressure vessel technology

    International Nuclear Information System (INIS)

    Aamodt, B.; Sandsmark, N.; Medonos, S.

    1977-01-01

    Main advantages of using general purpose finite element program systems in structural analysis are summarized. Several illustrative applications of the program system SESAM-69 to pressure vessel problems are described. The first example is a dynamic analysis of the motor housing of the internal main circulation pump of a BWR nuclear reactor. The next example is a transient heat conduction and stress analysis of deflector of feeding nozzle of PWR nuclear reactor. Then, numerical calculations of stress intensity factors and fatigue crack growth of semi-elliptical surface cracks are discussed. And finally, an elasto-plastic analysis of a thick plate with edge-cracks is considered. It is concluded that due to the fact that general purpose finite element program systems are general and user-orientated, they will gain increasingly higher popularity in the years ahead

  4. Explanation of Rotation Curves in Galaxies and Clusters of them, by Generalization of Schwarzschild Metric and Combination with MOND, eliminating Dark Matter

    Science.gov (United States)

    Vossos, Spyridon; Vossos, Elias

    2017-12-01

    Schwarzschild Metric is the first and the most important solution of Einstein vacuum field equations. This is associated with Lorentz metric of flat spacetime and produces the relativistic potential (Φ) and the field strength (g) outside a spherically symmetric mass or a non-rotating black hole. It has many applications such as gravitational red shift, the precession of Mercury’s orbit, Shapiro time delay etc. However, it is inefficient to explain the rotation curves in large galaxies and clusters of them, causing the necessity for dark matter. On the other hand, Modified Newtonian Dynamics (MOND) has already explained these rotation curves in many cases, using suitable interpolating function (μ) in Milgrom’s Law. In this presentation, we initially produce a Generalized Schwarzschild potential and the corresponding Metric of spacetime, in order to be in accordance with any isotropic metric of flat spacetime (including Galilean Metric of spacetime which is associated with Galilean Transformation of spacetime). From this Generalized Schwarzschild potential (Φ), we calculate the corresponding field strength (g), which is associated with the interpolating function (μ). In this way, a new relativistic potential is obtained (let us call 2nd Generalized Schwarzschild potential) which describes the gravitational interaction at any distance and for any metric of flat spacetime. Thus, not only the necessity for Dark Matter is eliminated, but also MOND becomes a pure Relativistic Theory of Gravitational Interaction. Then, we pass to the case of flat spacetime with Lorentz metric (Minkowski space), because the experimental data have been extracted using the Relativistic Doppler Shift and the gravitational red shift of Classic Relativity (CR). Thus, we Explain the Rotation Curves in Galaxies (e.g. NGC 3198) and Clusters of them as well as the Solar system, eliminating Dark Matter. This relativistic potential and the corresponding metric of spacetime have been obtained

  5. Presic-Boyd-Wong Type Results in Ordered Metric Spaces

    Directory of Open Access Journals (Sweden)

    Satish Shukla

    2014-04-01

    Full Text Available The purpose of this paper is to prove some Presic-Boyd-Wong type fixed point theorems in ordered metric spaces. The results of this paper generalize the famous results of Presic and Boyd-Wong in ordered metric spaces. We also initiate the homotopy result in product spaces. Some examples are provided which illustrate the results proved herein.

  6. 21 CFR 862.2050 - General purpose laboratory equipment labeled or promoted for a specific medical use.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false General purpose laboratory equipment labeled or... TOXICOLOGY DEVICES Clinical Laboratory Instruments § 862.2050 General purpose laboratory equipment labeled or promoted for a specific medical use. (a) Identification. General purpose laboratory equipment labeled or...

  7. Real-time radar signal processing using GPGPU (general-purpose graphic processing unit)

    Science.gov (United States)

    Kong, Fanxing; Zhang, Yan Rockee; Cai, Jingxiao; Palmer, Robert D.

    2016-05-01

    This study introduces a practical approach to develop real-time signal processing chain for general phased array radar on NVIDIA GPUs(Graphical Processing Units) using CUDA (Compute Unified Device Architecture) libraries such as cuBlas and cuFFT, which are adopted from open source libraries and optimized for the NVIDIA GPUs. The processed results are rigorously verified against those from the CPUs. Performance benchmarked in computation time with various input data cube sizes are compared across GPUs and CPUs. Through the analysis, it will be demonstrated that GPGPUs (General Purpose GPU) real-time processing of the array radar data is possible with relatively low-cost commercial GPUs.

  8. Discrete-Event Execution Alternatives on General Purpose Graphical Processing Units

    International Nuclear Information System (INIS)

    Perumalla, Kalyan S.

    2006-01-01

    Graphics cards, traditionally designed as accelerators for computer graphics, have evolved to support more general-purpose computation. General Purpose Graphical Processing Units (GPGPUs) are now being used as highly efficient, cost-effective platforms for executing certain simulation applications. While most of these applications belong to the category of time-stepped simulations, little is known about the applicability of GPGPUs to discrete event simulation (DES). Here, we identify some of the issues and challenges that the GPGPU stream-based interface raises for DES, and present some possible approaches to moving DES to GPGPUs. Initial performance results on simulation of a diffusion process show that DES-style execution on GPGPU runs faster than DES on CPU and also significantly faster than time-stepped simulations on either CPU or GPGPU.

  9. Design method of general-purpose driving circuit for CCD based on CPLD

    International Nuclear Information System (INIS)

    Zhang Yong; Tang Benqi; Xiao Zhigang; Wang Zujun; Huang Shaoyan

    2005-01-01

    It is very important for studying the radiation damage effects and mechanism systematically about CCD to develop a general-purpose test platform. The paper discusses the design method of general-purpose driving circuit for CCD based on CPLD and the realization approach. A main controller has being designed to read the data file from the outer memory, setup the correlative parameter registers and produce the driving pulses according with parameter request strictly, which is based on MAX7000S by using MAX-PLUS II software. The basic driving circuit module has being finished based on this method. The output waveform of the module is the same figure as the simulation waveform. The result indicates that the design method is feasible. (authors)

  10. ABAQUS-EPGEN: a general-purpose finite-element code. Volume 1. User's manual

    International Nuclear Information System (INIS)

    Hibbitt, H.D.; Karlsson, B.I.; Sorensen, E.P.

    1982-10-01

    This document is the User's Manual for ABAQUS/EPGEN, a general purpose finite element computer program, designed specifically to serve advanced structural analysis needs. The program contains very general libraries of elements, materials and analysis procedures, and is highly modular, so that complex combinations of features can be put together to model physical problems. The program is aimed at production analysis needs, and for this purpose aspects such as ease-of-use, reliability, flexibility and efficiency have received maximum attention. The input language is designed to make it straightforward to describe complicated models; the analysis procedures are highly automated with the program choosing time or load increments based on user supplied tolerances and controls; and the program offers a wide range of post-processing options for display of the analysis results

  11. General-purpose heat source project and space nuclear safety and fuels program. Progress report

    International Nuclear Information System (INIS)

    Maraman, W.J.

    1979-12-01

    This formal monthly report covers the studies related to the use of 238 PuO 2 in radioisotopic power systems carried out for the Advanced Nuclear Systems and Projects Division of the Los Alamos Scientific Laboratory. The two programs involved are general-purpose heat source development and space nuclear safety and fuels. Most of the studies discussed hear are of a continuing nature. Results and conclusions described may change as the work continues

  12. Development of general-purpose particle and heavy ion transport monte carlo code

    International Nuclear Information System (INIS)

    Iwase, Hiroshi; Nakamura, Takashi; Niita, Koji

    2002-01-01

    The high-energy particle transport code NMTC/JAM, which has been developed at JAERI, was improved for the high-energy heavy ion transport calculation by incorporating the JQMD code, the SPAR code and the Shen formula. The new NMTC/JAM named PHITS (Particle and Heavy-Ion Transport code System) is the first general-purpose heavy ion transport Monte Carlo code over the incident energies from several MeV/nucleon to several GeV/nucleon. (author)

  13. Comparison of progressive addition lenses for general purpose and for computer vision: an office field study.

    Science.gov (United States)

    Jaschinski, Wolfgang; König, Mirjam; Mekontso, Tiofil M; Ohlendorf, Arne; Welscher, Monique

    2015-05-01

    Two types of progressive addition lenses (PALs) were compared in an office field study: 1. General purpose PALs with continuous clear vision between infinity and near reading distances and 2. Computer vision PALs with a wider zone of clear vision at the monitor and in near vision but no clear distance vision. Twenty-three presbyopic participants wore each type of lens for two weeks in a double-masked four-week quasi-experimental procedure that included an adaptation phase (Weeks 1 and 2) and a test phase (Weeks 3 and 4). Questionnaires on visual and musculoskeletal conditions as well as preferences regarding the type of lenses were administered. After eight more weeks of free use of the spectacles, the preferences were assessed again. The ergonomic conditions were analysed from photographs. Head inclination when looking at the monitor was significantly lower by 2.3 degrees with the computer vision PALs than with the general purpose PALs. Vision at the monitor was judged significantly better with computer PALs, while distance vision was judged better with general purpose PALs; however, the reported advantage of computer vision PALs differed in extent between participants. Accordingly, 61 per cent of the participants preferred the computer vision PALs, when asked without information about lens design. After full information about lens characteristics and additional eight weeks of free spectacle use, 44 per cent preferred the computer vision PALs. On average, computer vision PALs were rated significantly better with respect to vision at the monitor during the experimental part of the study. In the final forced-choice ratings, approximately half of the participants preferred either the computer vision PAL or the general purpose PAL. Individual factors seem to play a role in this preference and in the rated advantage of computer vision PALs. © 2015 The Authors. Clinical and Experimental Optometry © 2015 Optometry Australia.

  14. A new general purpose event horizon finder for 3D numerical spacetimes

    International Nuclear Information System (INIS)

    Diener, Peter

    2003-01-01

    I present a new general purpose event horizon finder for full 3D numerical spacetimes. It works by evolving a complete null surface backwards in time. The null surface is described as the zero-level set of a scalar function, which in principle is defined everywhere. This description of the surface allows the surface, trivially, to change topology, making this event horizon finder able to handle numerical spacetimes where two (or more) black holes merge into a single final black hole

  15. A prepaid case study: Ready Credit’s general-purpose & transit-fare programs

    OpenAIRE

    Philip Keitel

    2012-01-01

    Today, prepaid cards are used in dozens of payment applications. To examine the most recent developments, the Payment Cards Center of the Federal Reserve Bank of Philadelphia hosted a workshop on August 22, 2011. Leading the workshop was Tim Walsh, president and chief executive officer of Ready Credit Corporation, a firm that developed network-branded prepaid cards for use in transit-fare systems and also markets general-purpose, reloadable prepaid cards to consumers. Walsh discussed the uniq...

  16. Design of General-purpose Industrial signal acquisition system in a large scientific device

    Science.gov (United States)

    Ren, Bin; Yang, Lei

    2018-02-01

    In order to measure the industrial signal of a large scientific device experiment, a set of industrial data general-purpose acquisition system has been designed. It can collect 4~20mA current signal and 0~10V voltage signal. Through the practical experiments, it shows that the system is flexible, reliable, convenient and economical, and the system has characters of high definition and strong anti-interference ability. Thus, the system fully meets the design requirements..

  17. Child first language and adult second language are both tied to general-purpose learning systems.

    Science.gov (United States)

    Hamrick, Phillip; Lum, Jarrad A G; Ullman, Michael T

    2018-02-13

    Do the mechanisms underlying language in fact serve general-purpose functions that preexist this uniquely human capacity? To address this contentious and empirically challenging issue, we systematically tested the predictions of a well-studied neurocognitive theory of language motivated by evolutionary principles. Multiple metaanalyses were performed to examine predicted links between language and two general-purpose learning systems, declarative and procedural memory. The results tied lexical abilities to learning only in declarative memory, while grammar was linked to learning in both systems in both child first language and adult second language, in specific ways. In second language learners, grammar was associated with only declarative memory at lower language experience, but with only procedural memory at higher experience. The findings yielded large effect sizes and held consistently across languages, language families, linguistic structures, and tasks, underscoring their reliability and validity. The results, which met the predicted pattern, provide comprehensive evidence that language is tied to general-purpose systems both in children acquiring their native language and adults learning an additional language. Crucially, if language learning relies on these systems, then our extensive knowledge of the systems from animal and human studies may also apply to this domain, leading to predictions that might be unwarranted in the more circumscribed study of language. Thus, by demonstrating a role for these systems in language, the findings simultaneously lay a foundation for potentially important advances in the study of this critical domain.

  18. Tracker Performance Metric

    National Research Council Canada - National Science Library

    Olson, Teresa; Lee, Harry; Sanders, Johnnie

    2002-01-01

    .... We have developed the Tracker Performance Metric (TPM) specifically for this purpose. It was designed to measure the output performance, on a frame-by-frame basis, using its output position and quality...

  19. General-purpose readout electronics for white neutron source at China Spallation Neutron Source.

    Science.gov (United States)

    Wang, Q; Cao, P; Qi, X; Yu, T; Ji, X; Xie, L; An, Q

    2018-01-01

    The under-construction White Neutron Source (WNS) at China Spallation Neutron Source is a facility for accurate measurements of neutron-induced cross section. Seven spectrometers are planned at WNS. As the physical objectives of each spectrometer are different, the requirements for readout electronics are not the same. In order to simplify the development of the readout electronics, this paper presents a general method for detector signal readout. This method has advantages of expansibility and flexibility, which makes it adaptable to most detectors at WNS. In the WNS general-purpose readout electronics, signals from any kinds of detectors are conditioned by a dedicated signal conditioning module corresponding to this detector, and then digitized by a common waveform digitizer with high speed and high precision (1 GSPS at 12-bit) to obtain the full waveform data. The waveform digitizer uses a field programmable gate array chip to process the data stream and trigger information in real time. PXI Express platform is used to support the functionalities of data readout, clock distribution, and trigger information exchange between digitizers and trigger modules. Test results show that the performance of the WNS general-purpose readout electronics can meet the requirements of the WNS spectrometers.

  20. Literature Review: Weldability of Iridium DOP-26 Alloy for General Purpose Heat Source

    Energy Technology Data Exchange (ETDEWEB)

    Burgardt, Paul [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Pierce, Stanley W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-10-19

    The basic purpose of this paper is to provide a literature review relative to fabrication of the General Purpose Heat Source (GPHS) that is used to provide electrical power for deep space missions of NASA. The particular fabrication operation to be addressed here is arc welding of the GPHS encapsulation. A considerable effort was made to optimize the fabrication of the fuel pellets and of other elements of the encapsulation; that work will not be directly addressed in this paper. This report consists of three basic sections: 1) a brief description of the GPHS will be provided as background information for the reader; 2) mechanical properties and the optimization thereof as relevant to welding will be discussed; 3) a review of the arc welding process development and optimization will be presented. Since the welding equipment must be upgraded for future production, some discussion of the historical establishment of relevant welding variables and possible changes thereto will also be discussed.

  1. Design of tallying function for general purpose Monte Carlo particle transport code JMCT

    International Nuclear Information System (INIS)

    Shangguan Danhua; Li Gang; Deng Li; Zhang Baoyin

    2013-01-01

    A new postponed accumulation algorithm was proposed. Based on JCOGIN (J combinatorial geometry Monte Carlo transport infrastructure) framework and the postponed accumulation algorithm, the tallying function of the general purpose Monte Carlo neutron-photon transport code JMCT was improved markedly. JMCT gets a higher tallying efficiency than MCNP 4C by 28% for simple geometry model, and JMCT is faster than MCNP 4C by two orders of magnitude for complicated repeated structure model. The available ability of tallying function for JMCT makes firm foundation for reactor analysis and multi-step burnup calculation. (authors)

  2. General-purpose chemical analyzer for on-line analyses of radioactive solutions

    International Nuclear Information System (INIS)

    Spencer, W.A.; Kronberg, J.W.

    1983-01-01

    An automated analyzer is being developed to perform analytical measurements on radioactive solutions on-line in a hostile environment. This General Purpose Chemical Analyzer (GPCA) samples a process stream, adds reagents, measures solution absorbances or electrode potentials, and automatically calculates the results. The use of modular components, under microprocessor control, permits a single analyzer design to carry out many types of analyses. This paper discusses the more important design criteria for the GPCA, and describes the equipment being tested in a prototype unit

  3. Software design of a general purpose data acquisition and control executive

    International Nuclear Information System (INIS)

    Labiak, W.G.; Minor, E.G.

    1981-01-01

    The software design of an executive which performs general purpose data acquisition, monitoring, and control is presented. The executive runs on a memory-based mini or micro-computer and communicates with a disk-based computer where data analysis and display are done. The executive design stresses reliability and versatility, and has yielded software which can provide control and monitoring for widely different hardware systems. Applications of this software on two major fusion energy experiments at Lawrence Livermore National Laboratory will be described

  4. Specialized Monte Carlo codes versus general-purpose Monte Carlo codes

    International Nuclear Information System (INIS)

    Moskvin, Vadim; DesRosiers, Colleen; Papiez, Lech; Lu, Xiaoyi

    2002-01-01

    The possibilities of Monte Carlo modeling for dose calculations and optimization treatment are quite limited in radiation oncology applications. The main reason is that the Monte Carlo technique for dose calculations is time consuming while treatment planning may require hundreds of possible cases of dose simulations to be evaluated for dose optimization. The second reason is that general-purpose codes widely used in practice, require an experienced user to customize them for calculations. This paper discusses the concept of Monte Carlo code design that can avoid the main problems that are preventing wide spread use of this simulation technique in medical physics. (authors)

  5. General purpose graphics-processing-unit implementation of cosmological domain wall network evolution.

    Science.gov (United States)

    Correia, J R C C C; Martins, C J A P

    2017-10-01

    Topological defects unavoidably form at symmetry breaking phase transitions in the early universe. To probe the parameter space of theoretical models and set tighter experimental constraints (exploiting the recent advances in astrophysical observations), one requires more and more demanding simulations, and therefore more hardware resources and computation time. Improving the speed and efficiency of existing codes is essential. Here we present a general purpose graphics-processing-unit implementation of the canonical Press-Ryden-Spergel algorithm for the evolution of cosmological domain wall networks. This is ported to the Open Computing Language standard, and as a consequence significant speedups are achieved both in two-dimensional (2D) and 3D simulations.

  6. A Real-Time Programmer's Tour of General-Purpose L4 Microkernels

    OpenAIRE

    Ruocco Sergio

    2008-01-01

    Abstract L4-embedded is a microkernel successfully deployed in mobile devices with soft real-time requirements. It now faces the challenges of tightly integrated systems, in which user interface, multimedia, OS, wireless protocols, and even software-defined radios must run on a single CPU. In this paper we discuss the pros and cons of L4-embedded for real-time systems design, focusing on the issues caused by the extreme speed optimisations it inherited from its general-purpose ancestors. Sinc...

  7. A Real-Time Programmer's Tour of General-Purpose L4 Microkernels

    OpenAIRE

    Sergio Ruocco

    2008-01-01

    L4-embedded is a microkernel successfully deployed in mobile devices with soft real-time requirements. It now faces the challenges of tightly integrated systems, in which user interface, multimedia, OS, wireless protocols, and even software-defined radios must run on a single CPU. In this paper we discuss the pros and cons of L4-embedded for real-time systems design, focusing on the issues caused by the extreme speed optimisations it inherited from its general-purpose ancestors. Since these i...

  8. Development of a large-scale general purpose two-phase flow analysis code

    International Nuclear Information System (INIS)

    Terasaka, Haruo; Shimizu, Sensuke

    2001-01-01

    A general purpose three-dimensional two-phase flow analysis code has been developed for solving large-scale problems in industrial fields. The code uses a two-fluid model to describe the conservation equations for two-phase flow in order to be applicable to various phenomena. Complicated geometrical conditions are modeled by FAVOR method in structured grid systems, and the discretization equations are solved by a modified SIMPLEST scheme. To reduce computing time a matrix solver for the pressure correction equation is parallelized with OpenMP. Results of numerical examples show that the accurate solutions can be obtained efficiently and stably. (author)

  9. General purpose graphics-processing-unit implementation of cosmological domain wall network evolution

    Science.gov (United States)

    Correia, J. R. C. C. C.; Martins, C. J. A. P.

    2017-10-01

    Topological defects unavoidably form at symmetry breaking phase transitions in the early universe. To probe the parameter space of theoretical models and set tighter experimental constraints (exploiting the recent advances in astrophysical observations), one requires more and more demanding simulations, and therefore more hardware resources and computation time. Improving the speed and efficiency of existing codes is essential. Here we present a general purpose graphics-processing-unit implementation of the canonical Press-Ryden-Spergel algorithm for the evolution of cosmological domain wall networks. This is ported to the Open Computing Language standard, and as a consequence significant speedups are achieved both in two-dimensional (2D) and 3D simulations.

  10. General-purpose heat source project and space nuclear safety fuels program. Progress report, February 1980

    International Nuclear Information System (INIS)

    Maraman, W.J.

    1980-05-01

    This formal monthly report covers the studies related to the use of 238 PuO 2 in radioisotopic power systems carried out for the Advanced Nuclear Systems and Projects Division of the Los Alamos Scientific Laboratory. The two programs involved are: General-Purpose Heat Source Development and Space Nuclear Safety and Fuels. Most of the studies discussed here are of a continuing nature. Results and conclusions described may change as the work continues. Published reference to the results cited in this report should not be made without the explicit permission of the person in charge of the work

  11. Interfacing a General Purpose Fluid Network Flow Program with the SINDA/G Thermal Analysis Program

    Science.gov (United States)

    Schallhorn, Paul; Popok, Daniel

    1999-01-01

    A general purpose, one dimensional fluid flow code is currently being interfaced with the thermal analysis program Systems Improved Numerical Differencing Analyzer/Gaski (SINDA/G). The flow code, Generalized Fluid System Simulation Program (GFSSP), is capable of analyzing steady state and transient flow in a complex network. The flow code is capable of modeling several physical phenomena including compressibility effects, phase changes, body forces (such as gravity and centrifugal) and mixture thermodynamics for multiple species. The addition of GFSSP to SINDA/G provides a significant improvement in convective heat transfer modeling for SINDA/G. The interface development is conducted in multiple phases. This paper describes the first phase of the interface which allows for steady and quasi-steady (unsteady solid, steady fluid) conjugate heat transfer modeling.

  12. Implementation of the dynamic Monte Carlo method for transient analysis in the general purpose code Tripoli

    Energy Technology Data Exchange (ETDEWEB)

    Sjenitzer, Bart L.; Hoogenboom, J. Eduard, E-mail: B.L.Sjenitzer@TUDelft.nl, E-mail: J.E.Hoogenboom@TUDelft.nl [Delft University of Technology (Netherlands)

    2011-07-01

    A new Dynamic Monte Carlo method is implemented in the general purpose Monte Carlo code Tripoli 4.6.1. With this new method incorporated, a general purpose code can be used for safety transient analysis, such as the movement of a control rod or in an accident scenario. To make the Tripoli code ready for calculating on dynamic systems, the Tripoli scheme had to be altered to incorporate time steps, to include the simulation of delayed neutron precursors and to simulate prompt neutron chains. The modified Tripoli code is tested on two sample cases, a steady-state system and a subcritical system and the resulting neutron fluxes behave just as expected. The steady-state calculation has a constant neutron flux over time and this result shows the stability of the calculation. The neutron flux stays constant with acceptable variance. This also shows that the starting conditions are determined correctly. The sub-critical case shows that the code can also handle dynamic systems with a varying neutron flux. (author)

  13. Implementation of the dynamic Monte Carlo method for transient analysis in the general purpose code Tripoli

    International Nuclear Information System (INIS)

    Sjenitzer, Bart L.; Hoogenboom, J. Eduard

    2011-01-01

    A new Dynamic Monte Carlo method is implemented in the general purpose Monte Carlo code Tripoli 4.6.1. With this new method incorporated, a general purpose code can be used for safety transient analysis, such as the movement of a control rod or in an accident scenario. To make the Tripoli code ready for calculating on dynamic systems, the Tripoli scheme had to be altered to incorporate time steps, to include the simulation of delayed neutron precursors and to simulate prompt neutron chains. The modified Tripoli code is tested on two sample cases, a steady-state system and a subcritical system and the resulting neutron fluxes behave just as expected. The steady-state calculation has a constant neutron flux over time and this result shows the stability of the calculation. The neutron flux stays constant with acceptable variance. This also shows that the starting conditions are determined correctly. The sub-critical case shows that the code can also handle dynamic systems with a varying neutron flux. (author)

  14. Power performance of the general-purpose heat source radioisotope thermoelectric generator

    International Nuclear Information System (INIS)

    Bennett, G.L.; Lombardo, J.J.; Rock, B.J.

    1986-01-01

    The General-Purpose Heat Source Radioisotope Thermoelectric Generator (GRHS-RTG) has been developed under the sponsorship of the Department of Energy (DOE) to provide electrical power for the National Aeronautics and Space Administration (NASA) Galileo mission to Jupiter and the joint NASA/European Space Agency (ESA) Ulysses mission to study the polar regions of the sun. A total of five nuclear-heated generators and one electrically heated generator have been built and tested, proving out the design concept and meeting the specification requirements. The GPHS-RTG design is built upon the successful-technology used in the RTGs flown on the two NASA Voyager spacecraft and two US Air Force communications satellites. THe GPHS-RTG converts about 4400 W(t) from the nuclear heat source into at least 285 W(e) at beginning of mission (BOM). The GPHS-RTG consists of two major components: the General-Purpose Heat Source (GPHS) and the Converter. A conceptual drawing of the GPHs-RTG is presented and its design and performance are described

  15. Economic selection index development for Beefmaster cattle II: General-purpose breeding objective.

    Science.gov (United States)

    Ochsner, K P; MacNeil, M D; Lewis, R M; Spangler, M L

    2017-05-01

    An economic selection index was developed for Beefmaster cattle in a general-purpose production system in which bulls are mated to a combination of heifers and mature cows, with resulting progeny retained as replacements or sold at weaning. National average prices from 2010 to 2014 were used to establish income and expenses for the system. Genetic parameters were obtained from the literature. Economic values were estimated by simulating 100,000 animals and approximating the partial derivatives of the profit function by perturbing traits 1 at a time, by 1 unit, while holding the other traits constant at their respective means. Relative economic values for the objective traits calving difficultly direct (CDd), calving difficulty maternal (CDm), weaning weight direct (WWd), weaning weight maternal (WWm), mature cow weight (MW), and heifer pregnancy (HP) were -2.11, -1.53, 18.49, 11.28, -33.46, and 1.19, respectively. Consequently, under the scenario assumed herein, the greatest improvements in profitability could be made by decreasing maintenance energy costs associated with MW followed by improvements in weaning weight. The accuracy of the index lies between 0.218 (phenotypic-based index selection) and 0.428 (breeding values known without error). Implementation of this index would facilitate genetic improvement and increase profitability of Beefmaster cattle operations with a general-purpose breeding objective when replacement females are retained and with weaned calves as the sale end point.

  16. General Purpose Data-Driven Online System Health Monitoring with Applications to Space Operations

    Science.gov (United States)

    Iverson, David L.; Spirkovska, Lilly; Schwabacher, Mark

    2010-01-01

    Modern space transportation and ground support system designs are becoming increasingly sophisticated and complex. Determining the health state of these systems using traditional parameter limit checking, or model-based or rule-based methods is becoming more difficult as the number of sensors and component interactions grows. Data-driven monitoring techniques have been developed to address these issues by analyzing system operations data to automatically characterize normal system behavior. System health can be monitored by comparing real-time operating data with these nominal characterizations, providing detection of anomalous data signatures indicative of system faults, failures, or precursors of significant failures. The Inductive Monitoring System (IMS) is a general purpose, data-driven system health monitoring software tool that has been successfully applied to several aerospace applications and is under evaluation for anomaly detection in vehicle and ground equipment for next generation launch systems. After an introduction to IMS application development, we discuss these NASA online monitoring applications, including the integration of IMS with complementary model-based and rule-based methods. Although the examples presented in this paper are from space operations applications, IMS is a general-purpose health-monitoring tool that is also applicable to power generation and transmission system monitoring.

  17. Operation of general purpose stepping motor controllers at the National Synchrotron Light Source

    International Nuclear Information System (INIS)

    Stubblefield, F.W.

    1986-10-01

    A prototype and four copies of a general purpose subsystem for mechanical positioning of detectors, samples, and beam line optical elements which constitute experiments at the National Synchrotron Light Source facility of Brookhaven National Laboratory have been constructed and placed into operation. Construction of a sixth subsystem is nearing completion. The subsystems effect mechanical positioning by controlling a set of stepping motors and their associated position encoders. The units are general purpose in the sense that they receive commands over a standard 9600 baud asynchronous serial line compatible with the RS-232-C electrical signal standard, generate TTL-compatible streams of stepping pulses which can be used with a wide variety of stepping motors, and read back position values from a number of different types and models of position encoder. The basic structure of the motor controller subsystem will be briefly reviewed. Short descriptions of the positioning apparatus actuated at each of the test and experiment stations employing a motor control unit are given. Additions and enhancements to the subsystem made in response to problems indicated by actual operation of the four installed units are described in more detail

  18. Operation of general purpose stepping motor controllers at the National Synchrotron Light Source

    International Nuclear Information System (INIS)

    Stubblefield, F.W.

    1987-01-01

    A prototype and four copies of a general purpose subsystem for mechanical positioning of detectors, samples, and beam line optical elements which constitute experiments at the National Synchrotron Light Source facility of Brookhaven National Laboratory have been constructed and placed into operation. Construction of a sixth subsystem is nearing completion. The subsystems effect mechanical positioning by controlling a set of stepping motors and their associated position encoders. The units are general purpose in the sense that they receive commands over a standard 9600 baud asynchronous serial line compatible with the RS-232-C electrical signal standard, generate TTL-compatible streams of stepping pulses which can be used with a wide variety of stepping motors, and read back position values from a number of different types and models of position encoder. The basic structure of the motor controller subsystem is briefly reviewed. Short descriptions of the positioning apparatus actuated at each of the test and experiment stations employing a motor control unit are given. Additions and enhancements to the sub-system made in response to problems indicated by actual operation of the four installed units are described in more detail

  19. Knowledge Management Systems as an Interdisciplinary Communication and Personalized General-Purpose Technology

    Directory of Open Access Journals (Sweden)

    Ulrich Schmitt

    2015-10-01

    Full Text Available As drivers of human civilization, Knowledge Management (KM processes have co-evolved in line with General-Purpose-Technologies (GPT, such as writing, printing, and information and communication systems. As evidenced by the recent shift from information scarcity to abundance, GPTs are capable of drastically altering societies due to their game-changing impact on our spheres of work and personal development. This paper looks at the prospect of whether a novel Personal Knowledge Management (PKM concept supported by a prototype system has got what it takes to grow into a transformative General-Purpose-Technology. Following up on a series of papers, the KM scenario of a decentralizing revolution where individuals and self-organized groups yield more power and autonomy is examined according to a GPT's essential characteristics, including a wide scope for improvement and elaboration (in people's private, professional and societal life, applicability across a broad range of uses in a wide variety of products and processes (in multi-disciplinary educational and work contexts, and strong complementarities with existing or potential new technologies (like organizational KM Systems and a proposed World Heritage of Memes Repository. The result portrays the PKM concept as a strong candidate due to its personal, autonomous, bottom-up, collaborative, interdisciplinary, and creativity-supporting approach destined to advance the availability, quantity, and quality of the world extelligence and to allow for a wider sharing and faster diffusion of ideas across current disciplinary and opportunity divides.

  20. A randomised comparison between an inexpensive, general-purpose headlight and a purpose-built surgical headlight on users' visual acuity and colour vision.

    Science.gov (United States)

    Street, I; Sayles, M; Nistor, M; McRae, A R

    2014-02-01

    To determine if there are any differences in near visual acuity and colour vision between an inexpensive general-purpose light emitting diode (LED) headlight and a purpose-built surgical LED headlight. A prospective study was conducted sequentially comparing near visual acuity and colour vision, the headlights being tested in random order, in a testing room with a constant minimal amount of background light. The participants were NHS employee volunteers, with self-declared normal (or corrected) vision, working in occupations requiring full literacy. For visual acuity, outcome was measured by recording the smallest font legible when using each headlight when the subject read a near visual acuity test card. For colour vision, the outcome was passing or failing the Ishihara test. There was no statistically significant difference between the general-purpose and the purpose-built headlights in users' near visual acuity or colour vision.

  1. Semantic metrics

    OpenAIRE

    Hu, Bo; Kalfoglou, Yannis; Dupplaw, David; Alani, Harith; Lewis, Paul; Shadbolt, Nigel

    2006-01-01

    In the context of the Semantic Web, many ontology-related operations, e.g. ontology ranking, segmentation, alignment, articulation, reuse, evaluation, can be boiled down to one fundamental operation: computing the similarity and/or dissimilarity among ontological entities, and in some cases among ontologies themselves. In this paper, we review standard metrics for computing distance measures and we propose a series of semantic metrics. We give a formal account of semantic metrics drawn from a...

  2. Design of a general-purpose European compound screening library for EU-OPENSCREEN.

    Science.gov (United States)

    Horvath, Dragos; Lisurek, Michael; Rupp, Bernd; Kühne, Ronald; Specker, Edgar; von Kries, Jens; Rognan, Didier; Andersson, C David; Almqvist, Fredrik; Elofsson, Mikael; Enqvist, Per-Anders; Gustavsson, Anna-Lena; Remez, Nikita; Mestres, Jordi; Marcou, Gilles; Varnek, Alexander; Hibert, Marcel; Quintana, Jordi; Frank, Ronald

    2014-10-01

    This work describes a collaborative effort to define and apply a protocol for the rational selection of a general-purpose screening library, to be used by the screening platforms affiliated with the EU-OPENSCREEN initiative. It is designed as a standard source of compounds for primary screening against novel biological targets, at the request of research partners. Given the general nature of the potential applications of this compound collection, the focus of the selection strategy lies on ensuring chemical stability, absence of reactive compounds, screening-compliant physicochemical properties, loose compliance to drug-likeness criteria (as drug design is a major, but not exclusive application), and maximal diversity/coverage of chemical space, aimed at providing hits for a wide spectrum of drugable targets. Finally, practical availability/cost issues cannot be avoided. The main goal of this publication is to inform potential future users of this library about its conception, sources, and characteristics. The outline of the selection procedure, notably of the filtering rules designed by a large committee of European medicinal chemists and chemoinformaticians, may be of general methodological interest for the screening/medicinal chemistry community. The selection task of 200K molecules out of a pre-filtered set of 1.4M candidates was shared by five independent European research groups, each picking a subset of 40K compounds according to their own in-house methodology and expertise. An in-depth analysis of chemical space coverage of the library serves not only to characterize the collection, but also to compare the various chemoinformatics-driven selection procedures of maximal diversity sets. Compound selections contributed by various participating groups were mapped onto general-purpose self-organizing maps (SOMs) built on the basis of marketed drugs and bioactive reference molecules. In this way, the occupancy of chemical space by the EU-OPENSCREEN library could

  3. A Real-Time Programmer's Tour of General-Purpose L4 Microkernels

    Directory of Open Access Journals (Sweden)

    Ruocco Sergio

    2008-01-01

    Full Text Available Abstract L4-embedded is a microkernel successfully deployed in mobile devices with soft real-time requirements. It now faces the challenges of tightly integrated systems, in which user interface, multimedia, OS, wireless protocols, and even software-defined radios must run on a single CPU. In this paper we discuss the pros and cons of L4-embedded for real-time systems design, focusing on the issues caused by the extreme speed optimisations it inherited from its general-purpose ancestors. Since these issues can be addressed with a minimal performance loss, we conclude that, overall, the design of real-time systems based on L4-embedded is possible, and facilitated by a number of design features unique to microkernels and the L4 family.

  4. General purpose dynamic Monte Carlo with continuous energy for transient analysis

    Energy Technology Data Exchange (ETDEWEB)

    Sjenitzer, B. L.; Hoogenboom, J. E. [Delft Univ. of Technology, Dept. of Radiation, Radionuclide and Reactors, Mekelweg 15, 2629JB Delft (Netherlands)

    2012-07-01

    For safety assessments transient analysis is an important tool. It can predict maximum temperatures during regular reactor operation or during an accident scenario. Despite the fact that this kind of analysis is very important, the state of the art still uses rather crude methods, like diffusion theory and point-kinetics. For reference calculations it is preferable to use the Monte Carlo method. In this paper the dynamic Monte Carlo method is implemented in the general purpose Monte Carlo code Tripoli4. Also, the method is extended for use with continuous energy. The first results of Dynamic Tripoli demonstrate that this kind of calculation is indeed accurate and the results are achieved in a reasonable amount of time. With the method implemented in Tripoli it is now possible to do an exact transient calculation in arbitrary geometry. (authors)

  5. Generic functional requirements for a NASA general-purpose data base management system

    Science.gov (United States)

    Lohman, G. M.

    1981-01-01

    Generic functional requirements for a general-purpose, multi-mission data base management system (DBMS) for application to remotely sensed scientific data bases are detailed. The motivation for utilizing DBMS technology in this environment is explained. The major requirements include: (1) a DBMS for scientific observational data; (2) a multi-mission capability; (3) user-friendly; (4) extensive and integrated information about data; (5) robust languages for defining data structures and formats; (6) scientific data types and structures; (7) flexible physical access mechanisms; (8) ways of representing spatial relationships; (9) a high level nonprocedural interactive query and data manipulation language; (10) data base maintenance utilities; (11) high rate input/output and large data volume storage; and adaptability to a distributed data base and/or data base machine configuration. Detailed functions are specified in a top-down hierarchic fashion. Implementation, performance, and support requirements are also given.

  6. A General Purpose Feature Extractor for Light Detection and Ranging Data

    Directory of Open Access Journals (Sweden)

    Edwin B. Olson

    2010-11-01

    Full Text Available Feature extraction is a central step of processing Light Detection and Ranging (LIDAR data. Existing detectors tend to exploit characteristics of specific environments: corners and lines from indoor (rectilinear environments, and trees from outdoor environments. While these detectors work well in their intended environments, their performance in different environments can be poor. We describe a general purpose feature detector for both 2D and 3D LIDAR data that is applicable to virtually any environment. Our method adapts classic feature detection methods from the image processing literature, specifically the multi-scale Kanade-Tomasi corner detector. The resulting method is capable of identifying highly stable and repeatable features at a variety of spatial scales without knowledge of environment, and produces principled uncertainty estimates and corner descriptors at same time. We present results on both software simulation and standard datasets, including the 2D Victoria Park and Intel Research Center datasets, and the 3D MIT DARPA Urban Challenge dataset.

  7. A general purpose feature extractor for light detection and ranging data.

    Science.gov (United States)

    Li, Yangming; Olson, Edwin B

    2010-01-01

    Feature extraction is a central step of processing Light Detection and Ranging (LIDAR) data. Existing detectors tend to exploit characteristics of specific environments: corners and lines from indoor (rectilinear) environments, and trees from outdoor environments. While these detectors work well in their intended environments, their performance in different environments can be poor. We describe a general purpose feature detector for both 2D and 3D LIDAR data that is applicable to virtually any environment. Our method adapts classic feature detection methods from the image processing literature, specifically the multi-scale Kanade-Tomasi corner detector. The resulting method is capable of identifying highly stable and repeatable features at a variety of spatial scales without knowledge of environment, and produces principled uncertainty estimates and corner descriptors at same time. We present results on both software simulation and standard datasets, including the 2D Victoria Park and Intel Research Center datasets, and the 3D MIT DARPA Urban Challenge dataset.

  8. Edge corrections to electromagnetic Casimir energies from general-purpose Mathieu-function routines

    Science.gov (United States)

    Blose, Elizabeth Noelle; Ghimire, Biswash; Graham, Noah; Stratton-Smith, Jeremy

    2015-01-01

    Scattering theory methods make it possible to calculate the Casimir energy of a perfectly conducting elliptic cylinder opposite a perfectly conducting plane in terms of Mathieu functions. In the limit of zero radius, the elliptic cylinder becomes a finite-width strip, which allows for the study of edge effects. However, existing packages for computing Mathieu functions are insufficient for this calculation because none can compute Mathieu functions of both the first and second kind for complex arguments. To address this shortcoming, we have written a general-purpose Mathieu-function package, based on algorithms developed by Alhargan. We use these routines to find edge corrections to the proximity force approximation for the Casimir energy of a perfectly conducting strip opposite a perfectly conducting plane.

  9. A General Purpose Connections type CTI Server Based on SIP Protocol and Its Implementation

    Science.gov (United States)

    Watanabe, Toru; Koizumi, Hisao

    In this paper, we propose a general purpose connections type CTI (Computer Telephony Integration) server that provides various CTI services such as voice logging where the CTI server communicates with IP-PBX using the SIP (Session Initiation Protocol), and accumulates voice packets of external line telephone call flowing between an IP telephone for extension and a VoIP gateway connected to outside line networks. The CTI server realizes CTI services such as voice logging, telephone conference, or IVR (interactive voice response) with accumulating and processing voice packets sampled. Furthermore, the CTI server incorporates a web server function which can provide various CTI services such as a Web telephone directory via a Web browser to PCs, cellular telephones or smart-phones in mobile environments.

  10. The General-Purpose Heat Source Radioisotope Thermoelectric Generator: Power for the Galileo and Ulysses missions

    International Nuclear Information System (INIS)

    Bennett, G.L.; Lombardo, J.J.; Hemler, R.J.; Peterson, J.R.

    1986-01-01

    Electrical power for NASA's Galileo mission to Jupiter and ESA's Ulysses mission to explore the polar regions of the Sun will be provided by General-Purpose Heat Source Radioisotope Thermo-electric Generators (GPHS-RTGs). Building upon the successful RTG technology used in the Voyager program, each GPHS-RTG will provide at least 285 W(e) at beginning-of-mission. The design concept has been proven through extensive tests of an electrically heated Engineering Unit and a nuclear-heated Qualification Unit. Four flight generators have been successfully assembled and tested for use on the Galileo and Ulysses spacecraft. All indications are that the GPHS-RTGs will meet or exceed the power requirement of the missions

  11. INGEN: a general-purpose mesh generator for finite element codes

    International Nuclear Information System (INIS)

    Cook, W.A.

    1979-05-01

    INGEN is a general-purpose mesh generator for two- and three-dimensional finite element codes. The basic parts of the code are surface and three-dimensional region generators that use linear-blending interpolation formulas. These generators are based on an i, j, k index scheme that is used to number nodal points, construct elements, and develop displacement and traction boundary conditions. This code can generate truss elements (2 modal points); plane stress, plane strain, and axisymmetry two-dimensional continuum elements (4 to 8 nodal points); plate elements (4 to 8 nodal points); and three-dimensional continuum elements (8 to 21 nodal points). The traction loads generated are consistent with the element generated. The expansion--contraction option is of special interest. This option makes it possible to change an existing mesh such that some regions are refined and others are made coarser than the original mesh. 9 figures

  12. Development of general-purpose software to analyze the static thermal characteristic of nuclear power plant

    International Nuclear Information System (INIS)

    Nakao, Yoshinobu; Koda, Eiichi; Takahashi, Toru

    2009-01-01

    We have developed the general-purpose software by which static thermal characteristic of the power generation system is analyzed easily. This software has the notable features as follows. It has the new algorithm to solve non-linear simultaneous equations to analyze the static thermal characteristics such as heat and mass balance, efficiencies, etc. of various power generation systems. It has the flexibility for setting calculation conditions. It is able to be executed on the personal computer easily and quickly. We ensured that it is able to construct heat and mass balance diagrams of main steam system of nuclear power plant and calculate the power output and efficiencies of the system. Furthermore, we evaluated various heat recovery measures of steam generator blowdown water and found that this software could be a useful operation aid for planning effective changes in support of power stretch. (author)

  13. The ICVSIE: A General Purpose Integral Equation Method for Bio-Electromagnetic Analysis.

    Science.gov (United States)

    Gomez, Luis J; Yucel, Abdulkadir C; Michielssen, Eric

    2018-03-01

    An internally combined volume surface integral equation (ICVSIE) for analyzing electromagnetic (EM) interactions with biological tissue and wide ranging diagnostic, therapeutic, and research applications, is proposed. The ICVSIE is a system of integral equations in terms of volume and surface equivalent currents in biological tissue subject to fields produced by externally or internally positioned devices. The system is created by using equivalence principles and solved numerically; the resulting current values are used to evaluate scattered and total electric fields, specific absorption rates, and related quantities. The validity, applicability, and efficiency of the ICVSIE are demonstrated by EM analysis of transcranial magnetic stimulation, magnetic resonance imaging, and neuromuscular electrical stimulation. Unlike previous integral equations, the ICVSIE is stable regardless of the electric permittivities of the tissue or frequency of operation, providing an application-agnostic computational framework for EM-biomedical analysis. Use of the general purpose and robust ICVSIE permits streamlining the development, deployment, and safety analysis of EM-biomedical technologies.

  14. Real-time traffic sign recognition based on a general purpose GPU and deep-learning.

    Science.gov (United States)

    Lim, Kwangyong; Hong, Yongwon; Choi, Yeongwoo; Byun, Hyeran

    2017-01-01

    We present a General Purpose Graphics Processing Unit (GPGPU) based real-time traffic sign detection and recognition method that is robust against illumination changes. There have been many approaches to traffic sign recognition in various research fields; however, previous approaches faced several limitations when under low illumination or wide variance of light conditions. To overcome these drawbacks and improve processing speeds, we propose a method that 1) is robust against illumination changes, 2) uses GPGPU-based real-time traffic sign detection, and 3) performs region detecting and recognition using a hierarchical model. This method produces stable results in low illumination environments. Both detection and hierarchical recognition are performed in real-time, and the proposed method achieves 0.97 F1-score on our collective dataset, which uses the Vienna convention traffic rules (Germany and South Korea).

  15. A low cost general purpose portable programmable master/slave manipulative appliance

    International Nuclear Information System (INIS)

    Cameron, W.

    1984-01-01

    The TRIUMF 100 μA 500 MeV cyclotron, located at the University of British Columbia, required a low cost, portable master/slave manipulative capability for experimental beam line servicing. A programmable capability was also required for the hot cell manipulators. A general purpose unit was developed that might also have applications in light manufacturing and medical rehabilitation. The project now in prototype testing represents a modular portable robot costing less than $5000 that is lead-through-teach programmable by either a master controller or hands-on lead-through. Task programs are stored and retrieved on any 32 k personal computer. An on-board proportional integral derivative controller (Motorola 6809 based) gives discrete positioning of the six degrees of freedom 2 kg capacity end effector

  16. Simrank: Rapid and sensitive general-purpose k-mer search tool

    Energy Technology Data Exchange (ETDEWEB)

    DeSantis, T.Z.; Keller, K.; Karaoz, U.; Alekseyenko, A.V; Singh, N.N.S.; Brodie, E.L; Pei, Z.; Andersen, G.L; Larsen, N.

    2011-04-01

    Terabyte-scale collections of string-encoded data are expected from consortia efforts such as the Human Microbiome Project (http://nihroadmap.nih.gov/hmp). Intra- and inter-project data similarity searches are enabled by rapid k-mer matching strategies. Software applications for sequence database partitioning, guide tree estimation, molecular classification and alignment acceleration have benefited from embedded k-mer searches as sub-routines. However, a rapid, general-purpose, open-source, flexible, stand-alone k-mer tool has not been available. Here we present a stand-alone utility, Simrank, which allows users to rapidly identify database strings the most similar to query strings. Performance testing of Simrank and related tools against DNA, RNA, protein and human-languages found Simrank 10X to 928X faster depending on the dataset. Simrank provides molecular ecologists with a high-throughput, open source choice for comparing large sequence sets to find similarity.

  17. A Real-Time Programmer's Tour of General-Purpose L4 Microkernels

    Directory of Open Access Journals (Sweden)

    Sergio Ruocco

    2008-02-01

    Full Text Available L4-embedded is a microkernel successfully deployed in mobile devices with soft real-time requirements. It now faces the challenges of tightly integrated systems, in which user interface, multimedia, OS, wireless protocols, and even software-defined radios must run on a single CPU. In this paper we discuss the pros and cons of L4-embedded for real-time systems design, focusing on the issues caused by the extreme speed optimisations it inherited from its general-purpose ancestors. Since these issues can be addressed with a minimal performance loss, we conclude that, overall, the design of real-time systems based on L4-embedded is possible, and facilitated by a number of design features unique to microkernels and the L4 family.

  18. General-purpose stepping motor-encoder positioning subsystem with standard asynchronous serial-line interface

    International Nuclear Information System (INIS)

    Stubblefield, F.W.; Alberi, J.L.

    1982-01-01

    A general-purpose mechanical positioning subsystem for open-loop control of experiment devices which have their positions established and read out by stepping motor-encoder combinations has been developed. The subsystem is to be used mainly for experiments to be conducted at the National Synchrotron Light Source at Brookhaven National Laboratory. The subsystem unit has been designed to be compatible with a wide variety of stepping motor and encoder types. The unit may be operated by any device capable of driving a standard RS-232-C asynchronous serial communication line. An informal survey has shown that several experiments at the Light Source will use one particular type of computer, operating system, and programming language. Accordingly, a library of subroutines compatible with this combination of computer system elements has been written to facilitate driving the positioning subsystem unit

  19. Development and application of General Purpose Data Acquisition Shell (GPDAS) at advanced photon source

    International Nuclear Information System (INIS)

    Chung, Youngjoo; Kim, Keeman.

    1991-01-01

    An operating system shell GPDAS (General Purpose Data Acquisition Shell) on MS-DOS-based microcomputers has been developed to provide flexibility in data acquisition and device control for magnet measurements at the Advanced Photon Source. GPDAS is both a command interpreter and an integrated script-based programming environment. It also incorporates the MS-DOS shell to make use of the existing utility programs for file manipulation and data analysis. Features include: alias definition, virtual memory, windows, graphics, data and procedure backup, background operation, script programming language, and script level debugging. Data acquisition system devices can be controlled through IEEE488 board, multifunction I/O board, digital I/O board and Gespac crate via Euro G-64 bus. GPDAS is now being used for diagnostics R ampersand D and accelerator physics studies as well as for magnet measurements. Their hardware configurations will also be discussed. 3 refs., 3 figs

  20. General Purpose Graphics Processing Unit Based High-Rate Rice Decompression and Reed-Solomon Decoding

    Energy Technology Data Exchange (ETDEWEB)

    Loughry, Thomas A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-02-01

    As the volume of data acquired by space-based sensors increases, mission data compression/decompression and forward error correction code processing performance must likewise scale. This competency development effort was explored using the General Purpose Graphics Processing Unit (GPGPU) to accomplish high-rate Rice Decompression and high-rate Reed-Solomon (RS) decoding at the satellite mission ground station. Each algorithm was implemented and benchmarked on a single GPGPU. Distributed processing across one to four GPGPUs was also investigated. The results show that the GPGPU has considerable potential for performing satellite communication Data Signal Processing, with three times or better performance improvements and up to ten times reduction in cost over custom hardware, at least in the case of Rice Decompression and Reed-Solomon Decoding.

  1. Developing wearable bio-feedback systems: a general-purpose platform.

    Science.gov (United States)

    Bianchi, Luigi; Babiloni, Fabio; Cincotti, Febo; Arrivas, Marco; Bollero, Patrizio; Marciani, Maria Grazia

    2003-06-01

    Microprocessors, even those in PocketPCs, have adequate power for many real-time biofeedback applications for disabled people. This power allows design of portable or wearable devices that are smaller and lighter, and that have longer battery life compared to notebook-based systems. In this paper, we discuss a general-purpose hardware/software solution based on industrial or consumer devices and a C++ framework. Its flexibility and modularity make it adaptable to a wide range of situations. Moreover, its design minimizes system requirements and programming effort, thus allowing efficient systems to be built quickly and easily. Our design has been used to build two brain computer interface systems that were easily ported from the Win32 platform.

  2. General-purpose heat source safety verification test series: SVT-11 through SVT-13

    International Nuclear Information System (INIS)

    George, T.G.; Pavone, D.

    1986-05-01

    The General-Purpose Heat Source (GPHS) is a modular component of the radioisotope thermoelectric generator that will provide power for the Galileo and Ulysses (formerly ISPM) space missions. The GPHS provides power by transmitting the heat of 238 Pu α-decay to an array of thermoelectric elements. Because the possibility of an orbital abort always exists, the heat source was designed and constructed to minimize plutonia release in any accident environment. The Safety Verification Test (SVT) series was formulated to evaluate the effectiveness of GPHS plutonia containment after atmospheric reentry and Earth impact. The first two reports (covering SVT-1 through SVT-10) described the results of flat, side-on, and angular module impacts against steel targets at 54 m/s. This report describes flat-on module impacts against concrete and granite targets, at velocities equivalent to or higher than previous SVTs

  3. ''Sheiva'' : a general purpose multi-parameter data acquisition and processing system at VECC

    International Nuclear Information System (INIS)

    Viyogi, Y.P.; Ganguly, N.K.

    1982-01-01

    A general purpose interactive software to be used with the PDP-15/76 on-line computer at VEC Centre for the acquisition and processing of data in nuclear physics experiments is described. The program can accommodate a maximum of thirty two inputs although the present hardware limits the number of inputs to eight. Particular emphasis is given to the problems of flexibility and ease of operation, memory optimisation and techniques dealing with experimenter-computer interaction. Various graphical methods for one- and two-dimensional data presentation are discussed. Specific problems of particle identification using detector telescopes have been dealt with carefully to handle experiments using several detector telescopes and those involving light particle-heavy particle coincidence studies. Steps needed to tailor this program towards utilisation for special experiments are also described. (author)

  4. A general purpose subroutine for fast fourier transform on a distributed memory parallel machine

    Science.gov (United States)

    Dubey, A.; Zubair, M.; Grosch, C. E.

    1992-01-01

    One issue which is central in developing a general purpose Fast Fourier Transform (FFT) subroutine on a distributed memory parallel machine is the data distribution. It is possible that different users would like to use the FFT routine with different data distributions. Thus, there is a need to design FFT schemes on distributed memory parallel machines which can support a variety of data distributions. An FFT implementation on a distributed memory parallel machine which works for a number of data distributions commonly encountered in scientific applications is presented. The problem of rearranging the data after computing the FFT is also addressed. The performance of the implementation on a distributed memory parallel machine Intel iPSC/860 is evaluated.

  5. General purpose graphic processing unit implementation of adaptive pulse compression algorithms

    Science.gov (United States)

    Cai, Jingxiao; Zhang, Yan

    2017-07-01

    This study introduces a practical approach to implement real-time signal processing algorithms for general surveillance radar based on NVIDIA graphical processing units (GPUs). The pulse compression algorithms are implemented using compute unified device architecture (CUDA) libraries such as CUDA basic linear algebra subroutines and CUDA fast Fourier transform library, which are adopted from open source libraries and optimized for the NVIDIA GPUs. For more advanced, adaptive processing algorithms such as adaptive pulse compression, customized kernel optimization is needed and investigated. A statistical optimization approach is developed for this purpose without needing much knowledge of the physical configurations of the kernels. It was found that the kernel optimization approach can significantly improve the performance. Benchmark performance is compared with the CPU performance in terms of processing accelerations. The proposed implementation framework can be used in various radar systems including ground-based phased array radar, airborne sense and avoid radar, and aerospace surveillance radar.

  6. A general-purpose process modelling framework for marine energy systems

    International Nuclear Information System (INIS)

    Dimopoulos, George G.; Georgopoulou, Chariklia A.; Stefanatos, Iason C.; Zymaris, Alexandros S.; Kakalis, Nikolaos M.P.

    2014-01-01

    Highlights: • Process modelling techniques applied in marine engineering. • Systems engineering approaches to manage the complexity of modern ship machinery. • General purpose modelling framework called COSSMOS. • Mathematical modelling of conservation equations and related chemical – transport phenomena. • Generic library of ship machinery component models. - Abstract: High fuel prices, environmental regulations and current shipping market conditions impose ships to operate in a more efficient and greener way. These drivers lead to the introduction of new technologies, fuels, and operations, increasing the complexity of modern ship energy systems. As a means to manage this complexity, in this paper we present the introduction of systems engineering methodologies in marine engineering via the development of a general-purpose process modelling framework for ships named as DNV COSSMOS. Shifting the focus from components – the standard approach in shipping- to systems, widens the space for optimal design and operation solutions. The associated computer implementation of COSSMOS is a platform that models, simulates and optimises integrated marine energy systems with respect to energy efficiency, emissions, safety/reliability and costs, under both steady-state and dynamic conditions. DNV COSSMOS can be used in assessment and optimisation of design and operation problems in existing vessels, new builds as well as new technologies. The main features and our modelling approach are presented and key capabilities are illustrated via two studies on the thermo-economic design and operation optimisation of a combined cycle system for large bulk carriers, and the transient operation simulation of an electric marine propulsion system

  7. Design of the SLAC RCE Platform: A General Purpose ATCA Based Data Acquisition System

    International Nuclear Information System (INIS)

    Herbst, R.; Claus, R.; Freytag, M.; Haller, G.; Huffer, M.; Maldonado, S.; Nishimura, K.; O'Grady, C.; Panetta, J.; Perazzo, A.; Reese, B.; Ruckman, L.; Thayer, J.G.; Weaver, M.

    2015-01-01

    The SLAC RCE platform is a general purpose clustered data acquisition system implemented on a custom ATCA compliant blade, called the Cluster On Board (COB). The core of the system is the Reconfigurable Cluster Element (RCE), which is a system-on-chip design based upon the Xilinx Zynq family of FPGAs, mounted on custom COB daughter-boards. The Zynq architecture couples a dual core ARM Cortex A9 based processor with a high performance 28nm FPGA. The RCE has 12 external general purpose bi-directional high speed links, each supporting serial rates of up to 12Gbps. 8 RCE nodes are included on a COB, each with a 10Gbps connection to an on-board 24-port Ethernet switch integrated circuit. The COB is designed to be used with a standard full-mesh ATCA backplane allowing multiple RCE nodes to be tightly interconnected with minimal interconnect latency. Multiple shelves can be clustered using the front panel 10-gbps connections. The COB also supports local and inter-blade timing and trigger distribution. An experiment specific Rear Transition Module adapts the 96 high speed serial links to specific experiments and allows an experiment-specific timing and busy feedback connection. This coupling of processors with a high performance FPGA fabric in a low latency, multiple node cluster allows high speed data processing that can be easily adapted to any physics experiment. RTEMS and Linux are both ported to the module. The RCE has been used or is the baseline for several current and proposed experiments (LCLS, HPS, LSST, ATLAS-CSC, LBNE, DarkSide, ILC-SiD, etc).

  8. Transforming the ASDEX Upgrade discharge control system to a general-purpose plasma control platform

    International Nuclear Information System (INIS)

    Treutterer, Wolfgang; Cole, Richard; Gräter, Alexander; Lüddecke, Klaus; Neu, Gregor; Rapson, Christopher; Raupp, Gerhard; Zasche, Dieter; Zehetbauer, Thomas

    2015-01-01

    Highlights: • Control framework split in core and custom part. • Core framework deployable in other fusion device environments. • Adaptible through customizable modules, plug-in support and generic interfaces. - Abstract: The ASDEX Upgrade Discharge Control System DCS is a modern and mature product, originally designed to regulate and supervise ASDEX Upgrade Tokamak plasma operation. In its core DCS is based on a generic, versatile real-time software framework with a plugin architecture that allows to easily combine, modify and extend control function modules in order to tailor the system to required features and let it continuously evolve with the progress of an experimental fusion device. Due to these properties other fusion experiments like the WEST project have expressed interest in adopting DCS. For this purpose, essential parts of DCS must be unpinned from the ASDEX Upgrade environment by exposure or introduction of generalised interfaces. Re-organisation of DCS modules allows distinguishing between intrinsic framework core functions and device-specific applications. In particular, DCS must be prepared for deployment in different system environments with their own realisations for user interface, pulse schedule preparation, parameter server, time and event distribution, diagnostic and actuator systems, network communication and data archiving. The article explains the principles of the revised DCS structure, derives the necessary interface definitions and describes major steps to achieve the separation between general-purpose framework and fusion device specific components.

  9. Transforming the ASDEX Upgrade discharge control system to a general-purpose plasma control platform

    Energy Technology Data Exchange (ETDEWEB)

    Treutterer, Wolfgang, E-mail: Wolfgang.Treutterer@ipp.mpg.de [Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, 85748 Garching (Germany); Cole, Richard [Unlimited Computer Systems, Seeshaupter Str. 15, 82393 Iffeldorf (Germany); Gräter, Alexander [Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, 85748 Garching (Germany); Lüddecke, Klaus [Unlimited Computer Systems, Seeshaupter Str. 15, 82393 Iffeldorf (Germany); Neu, Gregor; Rapson, Christopher; Raupp, Gerhard; Zasche, Dieter; Zehetbauer, Thomas [Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, 85748 Garching (Germany)

    2015-10-15

    Highlights: • Control framework split in core and custom part. • Core framework deployable in other fusion device environments. • Adaptible through customizable modules, plug-in support and generic interfaces. - Abstract: The ASDEX Upgrade Discharge Control System DCS is a modern and mature product, originally designed to regulate and supervise ASDEX Upgrade Tokamak plasma operation. In its core DCS is based on a generic, versatile real-time software framework with a plugin architecture that allows to easily combine, modify and extend control function modules in order to tailor the system to required features and let it continuously evolve with the progress of an experimental fusion device. Due to these properties other fusion experiments like the WEST project have expressed interest in adopting DCS. For this purpose, essential parts of DCS must be unpinned from the ASDEX Upgrade environment by exposure or introduction of generalised interfaces. Re-organisation of DCS modules allows distinguishing between intrinsic framework core functions and device-specific applications. In particular, DCS must be prepared for deployment in different system environments with their own realisations for user interface, pulse schedule preparation, parameter server, time and event distribution, diagnostic and actuator systems, network communication and data archiving. The article explains the principles of the revised DCS structure, derives the necessary interface definitions and describes major steps to achieve the separation between general-purpose framework and fusion device specific components.

  10. Optimization of a general-purpose, actively scanned proton beamline for ocular treatments: Geant4 simulations.

    Science.gov (United States)

    Piersimoni, Pierluigi; Rimoldi, Adele; Riccardi, Cristina; Pirola, Michele; Molinelli, Silvia; Ciocca, Mario

    2015-03-08

    The Italian National Center for Hadrontherapy (CNAO, Centro Nazionale di Adroterapia Oncologica), a synchrotron-based hospital facility, started the treatment of patients within selected clinical trials in late 2011 and 2012 with actively scanned proton and carbon ion beams, respectively. The activation of a new clinical protocol for the irradiation of uveal melanoma using the existing general-purpose proton beamline is foreseen for late 2014. Beam characteristics and patient treatment setup need to be tuned to meet the specific requirements for such a type of treatment technique. The aim of this study is to optimize the CNAO transport beamline by adding passive components and minimizing air gap to achieve the optimal conditions for ocular tumor irradiation. The CNAO setup with the active and passive components along the transport beamline, as well as a human eye-modeled detector also including a realistic target volume, were simulated using the Monte Carlo Geant4 toolkit. The strong reduction of the air gap between the nozzle and patient skin, as well as the insertion of a range shifter plus a patient-specific brass collimator at a short distance from the eye, were found to be effective tools to be implemented. In perspective, this simulation toolkit could also be used as a benchmark for future developments and testing purposes on commercial treatment planning systems.

  11. Generalized two-dimensional (2D) linear system analysis metrics (GMTF, GDQE) for digital radiography systems including the effect of focal spot, magnification, scatter, and detector characteristics.

    Science.gov (United States)

    Jain, Amit; Kuhls-Gilcrist, Andrew T; Gupta, Sandesh K; Bednarek, Daniel R; Rudin, Stephen

    2010-03-01

    The MTF, NNPS, and DQE are standard linear system metrics used to characterize intrinsic detector performance. To evaluate total system performance for actual clinical conditions, generalized linear system metrics (GMTF, GNNPS and GDQE) that include the effect of the focal spot distribution, scattered radiation, and geometric unsharpness are more meaningful and appropriate. In this study, a two-dimensional (2D) generalized linear system analysis was carried out for a standard flat panel detector (FPD) (194-micron pixel pitch and 600-micron thick CsI) and a newly-developed, high-resolution, micro-angiographic fluoroscope (MAF) (35-micron pixel pitch and 300-micron thick CsI). Realistic clinical parameters and x-ray spectra were used. The 2D detector MTFs were calculated using the new Noise Response method and slanted edge method and 2D focal spot distribution measurements were done using a pin-hole assembly. The scatter fraction, generated for a uniform head equivalent phantom, was measured and the scatter MTF was simulated with a theoretical model. Different magnifications and scatter fractions were used to estimate the 2D GMTF, GNNPS and GDQE for both detectors. Results show spatial non-isotropy for the 2D generalized metrics which provide a quantitative description of the performance of the complete imaging system for both detectors. This generalized analysis demonstrated that the MAF and FPD have similar capabilities at lower spatial frequencies, but that the MAF has superior performance over the FPD at higher frequencies even when considering focal spot blurring and scatter. This 2D generalized performance analysis is a valuable tool to evaluate total system capabilities and to enable optimized design for specific imaging tasks.

  12. TACO: a general-purpose tool for predicting cell-type-specific transcription factor dimers.

    Science.gov (United States)

    Jankowski, Aleksander; Prabhakar, Shyam; Tiuryn, Jerzy

    2014-03-19

    Cooperative binding of transcription factor (TF) dimers to DNA is increasingly recognized as a major contributor to binding specificity. However, it is likely that the set of known TF dimers is highly incomplete, given that they were discovered using ad hoc approaches, or through computational analyses of limited datasets. Here, we present TACO (Transcription factor Association from Complex Overrepresentation), a general-purpose standalone software tool that takes as input any genome-wide set of regulatory elements and predicts cell-type-specific TF dimers based on enrichment of motif complexes. TACO is the first tool that can accommodate motif complexes composed of overlapping motifs, a characteristic feature of many known TF dimers. Our method comprehensively outperforms existing tools when benchmarked on a reference set of 29 known dimers. We demonstrate the utility and consistency of TACO by applying it to 152 DNase-seq datasets and 94 ChIP-seq datasets. Based on these results, we uncover a general principle governing the structure of TF-TF-DNA ternary complexes, namely that the flexibility of the complex is correlated with, and most likely a consequence of, inter-motif spacing.

  13. DNA Processing and Reassembly on General Purpose FPGA-based Development Boards

    Directory of Open Access Journals (Sweden)

    SZÁSZ Csaba

    2017-05-01

    Full Text Available The great majority of researchers involved in microelectronics generally agree that many scientific challenges in life sciences have associated with them a powerful computational requirement that must be solved before scientific progress can be made. The current trend in Deoxyribonucleic Acid (DNA computing technologies is to develop special hardware platforms capable to provide the needed processing performance at lower cost. In this endeavor the FPGA-based (Field Programmable Gate Arrays configurations aimed to accelerate genome sequencing and reassembly plays a leading role. This paper emphasizes benefits and advantages using general purpose FPGA-based development boards in DNA reassembly applications beside the special hardware architecture solutions. An original approach is unfolded which outlines the versatility of high performance ready-to-use manufacturer development platforms endowed with powerful hardware resources fully optimized for high speed processing applications. The theoretical arguments are supported via an intuitive implementation example where the designer it is discharged from any hardware development effort and completely assisted in exclusive concentration only on software design issues providing greatly reduced application development cycles. The experiments prove that such boards available on the market are suitable to fulfill in all a wide range of DNA sequencing and reassembly applications.

  14. Modelling of a general purpose irradiation chamber using a Monte Carlo particle transport code

    International Nuclear Information System (INIS)

    Dhiyauddin Ahmad Fauzi; Sheik, F.O.A.; Nurul Fadzlin Hasbullah

    2013-01-01

    Full-text: The aim of this research is to stimulate the effectiveness use of a general purpose irradiation chamber to contain pure neutron particles obtained from a research reactor. The secondary neutron and gamma particles dose discharge from the chamber layers will be used as a platform to estimate the safe dimension of the chamber. The chamber, made up of layers of lead (Pb), shielding, polyethylene (PE), moderator and commercial grade aluminium (Al) cladding is proposed for the use of interacting samples with pure neutron particles in a nuclear reactor environment. The estimation was accomplished through simulation based on general Monte Carlo N-Particle transport code using Los Alamos MCNPX software. Simulations were performed on the model of the chamber subjected to high neutron flux radiation and its gamma radiation product. The model of neutron particle used is based on the neutron source found in PUSPATI TRIGA MARK II research reactor which holds a maximum flux value of 1 x 10 12 neutron/ cm 2 s. The expected outcomes of this research are zero gamma dose in the core of the chamber and neutron dose rate of less than 10 μSv/ day discharge from the chamber system. (author)

  15. Litrani: a general purpose Monte-Carlo program simulating light propagation in isotropic or anisotropic media

    International Nuclear Information System (INIS)

    Gentit, F.-X.

    2002-01-01

    Litrani is a general purpose Monte-Carlo program simulating light propagation in any type of setup describable by the shapes provided by ROOT. Each shape may be made of a different material. Dielectric constant, absorption length and diffusion length of materials may depend upon wavelength. Dielectric constant and absorption length may be anisotropic. Each face of a volume is either partially or totally in contact with a face of another volume, or covered with some wrapping having defined characteristics of absorption, reflection and diffusion. When in contact with another face of another volume, the possibility exists to have a thin slice of width d and index n between the two faces. The program has various sources of light: spontaneous photons, photons coming from an optical fibre, photons generated by the crossing of particles or photons generated by an electromagnetic shower. The time and wavelength spectra of emitted photons may reproduce any scintillation spectrum. As detectors, phototubes, APD, or any general type of surface or volume detectors may be specified. The aim is to follow each photon until it is absorbed or detected. Quantities to be delivered by the program are the proportion of photons detected, and the time distribution for the arrival of these, or the various ways photons may be lost

  16. High Precision Thermal, Structural and Optical Analysis of an External Occulter Using a Common Model and the General Purpose Multi-Physics Analysis Tool Cielo

    Science.gov (United States)

    Hoff, Claus; Cady, Eric; Chainyk, Mike; Kissil, Andrew; Levine, Marie; Moore, Greg

    2011-01-01

    The efficient simulation of multidisciplinary thermo-opto-mechanical effects in precision deployable systems has for years been limited by numerical toolsets that do not necessarily share the same finite element basis, level of mesh discretization, data formats, or compute platforms. Cielo, a general purpose integrated modeling tool funded by the Jet Propulsion Laboratory and the Exoplanet Exploration Program, addresses shortcomings in the current state of the art via features that enable the use of a single, common model for thermal, structural and optical aberration analysis, producing results of greater accuracy, without the need for results interpolation or mapping. This paper will highlight some of these advances, and will demonstrate them within the context of detailed external occulter analyses, focusing on in-plane deformations of the petal edges for both steady-state and transient conditions, with subsequent optical performance metrics including intensity distributions at the pupil and image plane.

  17. Relaxed metrics and indistinguishability operators: the relationship

    Energy Technology Data Exchange (ETDEWEB)

    Martin, J.

    2017-07-01

    In 1982, the notion of indistinguishability operator was introduced by E. Trillas in order to fuzzify the crisp notion of equivalence relation (/cite{Trillas}). In the study of such a class of operators, an outstanding property must be pointed out. Concretely, there exists a duality relationship between indistinguishability operators and metrics. The aforesaid relationship was deeply studied by several authors that introduced a few techniques to generate metrics from indistinguishability operators and vice-versa (see, for instance, /cite{BaetsMesiar,BaetsMesiar2}). In the last years a new generalization of the metric notion has been introduced in the literature with the purpose of developing mathematical tools for quantitative models in Computer Science and Artificial Intelligence (/cite{BKMatthews,Ma}). The aforementioned generalized metrics are known as relaxed metrics. The main target of this talk is to present a study of the duality relationship between indistinguishability operators and relaxed metrics in such a way that the aforementioned classical techniques to generate both concepts, one from the other, can be extended to the new framework. (Author)

  18. 15 CFR 744.17 - Restrictions on certain exports and reexports of general purpose microprocessors for “military...

    Science.gov (United States)

    2010-01-01

    ... reexports of general purpose microprocessors for âmilitary end-usesâ and to âmilitary end-users.â 744.17...: END-USER AND END-USE BASED § 744.17 Restrictions on certain exports and reexports of general purpose microprocessors for “military end-uses” and to “military end-users.” (a) General prohibition. In addition to the...

  19. Symmetries of the dual metrics

    International Nuclear Information System (INIS)

    Baleanu, D.

    1998-01-01

    The geometric duality between the metric g μν and a Killing tensor K μν is studied. The conditions were found when the symmetries of the metric g μν and the dual metric K μν are the same. Dual spinning space was constructed without introduction of torsion. The general results are applied to the case of Kerr-Newmann metric

  20. Learning Low-Dimensional Metrics

    OpenAIRE

    Jain, Lalit; Mason, Blake; Nowak, Robert

    2017-01-01

    This paper investigates the theoretical foundations of metric learning, focused on three key questions that are not fully addressed in prior work: 1) we consider learning general low-dimensional (low-rank) metrics as well as sparse metrics; 2) we develop upper and lower (minimax)bounds on the generalization error; 3) we quantify the sample complexity of metric learning in terms of the dimension of the feature space and the dimension/rank of the underlying metric;4) we also bound the accuracy ...

  1. The PennBMBI: Design of a General Purpose Wireless Brain-Machine-Brain Interface System.

    Science.gov (United States)

    Liu, Xilin; Zhang, Milin; Subei, Basheer; Richardson, Andrew G; Lucas, Timothy H; Van der Spiegel, Jan

    2015-04-01

    In this paper, a general purpose wireless Brain-Machine-Brain Interface (BMBI) system is presented. The system integrates four battery-powered wireless devices for the implementation of a closed-loop sensorimotor neural interface, including a neural signal analyzer, a neural stimulator, a body-area sensor node and a graphic user interface implemented on the PC end. The neural signal analyzer features a four channel analog front-end with configurable bandpass filter, gain stage, digitization resolution, and sampling rate. The target frequency band is configurable from EEG to single unit activity. A noise floor of 4.69 μVrms is achieved over a bandwidth from 0.05 Hz to 6 kHz. Digital filtering, neural feature extraction, spike detection, sensing-stimulating modulation, and compressed sensing measurement are realized in a central processing unit integrated in the analyzer. A flash memory card is also integrated in the analyzer. A 2-channel neural stimulator with a compliance voltage up to ± 12 V is included. The stimulator is capable of delivering unipolar or bipolar, charge-balanced current pulses with programmable pulse shape, amplitude, width, pulse train frequency and latency. A multi-functional sensor node, including an accelerometer, a temperature sensor, a flexiforce sensor and a general sensor extension port has been designed. A computer interface is designed to monitor, control and configure all aforementioned devices via a wireless link, according to a custom designed communication protocol. Wireless closed-loop operation between the sensory devices, neural stimulator, and neural signal analyzer can be configured. The proposed system was designed to link two sites in the brain, bridging the brain and external hardware, as well as creating new sensory and motor pathways for clinical practice. Bench test and in vivo experiments are performed to verify the functions and performances of the system.

  2. General-Purpose Heat Source development: Safety Verification Test Program. Bullet/fragment test series

    Energy Technology Data Exchange (ETDEWEB)

    George, T.G.; Tate, R.E.; Axler, K.M.

    1985-05-01

    The radioisotope thermoelectric generator (RTG) that will provide power for space missions contains 18 General-Purpose Heat Source (GPHS) modules. Each module contains four /sup 238/PuO/sub 2/-fueled clads and generates 250 W/sub (t)/. Because a launch-pad or post-launch explosion is always possible, we need to determine the ability of GPHS fueled clads within a module to survive fragment impact. The bullet/fragment test series, part of the Safety Verification Test Plan, was designed to provide information on clad response to impact by a compact, high-energy, aluminum-alloy fragment and to establish a threshold value of fragment energy required to breach the iridium cladding. Test results show that a velocity of 555 m/s (1820 ft/s) with an 18-g bullet is at or near the threshold value of fragment velocity that will cause a clad breach. Results also show that an exothermic Ir/Al reaction occurs if aluminum and hot iridium are in contact, a contact that is possible and most damaging to the clad within a narrow velocity range. The observed reactions between the iridium and the aluminum were studied in the laboratory and are reported in the Appendix.

  3. General-Purpose Heat Source Safety Verification Test program: Edge-on flyer plate tests

    International Nuclear Information System (INIS)

    George, T.G.

    1987-03-01

    The radioisotope thermoelectric generator (RTG) that will supply power for the Galileo and Ulysses space missions contains 18 General-Purpose Heat Source (GPHS) modules. The GPHS modules provide power by transmitting the heat of 238 Pu α-decay to an array of thermoelectric elements. Each module contains four 238 PuO 2 -fueled clads and generates 250 W(t). Because the possibility of a launch vehicle explosion always exists, and because such an explosion could generate a field of high-energy fragments, the fueled clads within each GPHS module must survive fragment impact. The edge-on flyer plate tests were included in the Safety Verification Test series to provide information on the module/clad response to the impact of high-energy plate fragments. The test results indicate that the edge-on impact of a 3.2-mm-thick, aluminum-alloy (2219-T87) plate traveling at 915 m/s causes the complete release of fuel from capsules contained within a bare GPHS module, and that the threshold velocity sufficient to cause the breach of a bare, simulant-fueled clad impacted by a 3.5-mm-thick, aluminum-alloy (5052-T0) plate is approximately 140 m/s

  4. Environmental assessment of general-purpose heat source safety verification testing

    International Nuclear Information System (INIS)

    1995-02-01

    This Environmental Assessment (EA) was prepared to identify and evaluate potential environmental, safety, and health impacts associated with the Proposed Action to test General-Purpose Heat Source (GPHS) Radioisotope Thermoelectric Generator (RTG) assemblies at the Sandia National Laboratories (SNL) 10,000-Foot Sled Track Facility, Albuquerque, New Mexico. RTGs are used to provide a reliable source of electrical power on board some spacecraft when solar power is inadequate during long duration space missions. These units are designed to convert heat from the natural decay of radioisotope fuel into electrical power. Impact test data are required to support DOE's mission to provide radioisotope power systems to NASA and other user agencies. The proposed tests will expand the available safety database regarding RTG performance under postulated accident conditions. Direct observations and measurements of GPHS/RTG performance upon impact with hard, unyielding surfaces are required to verify model predictions and to ensure the continual evolution of the RTG designs that perform safely under varied accident environments. The Proposed Action is to conduct impact testing of RTG sections containing GPHS modules with simulated fuel. End-On and Side-On impact test series are planned

  5. Evaluation and characterization of General Purpose Heat Source girth welds for the Cassini mission

    International Nuclear Information System (INIS)

    Lynch, C.M.; Moniz, P.F.; Reimus, M.A.H.

    1998-01-01

    General Purpose Heat Sources (GPHSs) are components of Radioisotopic thermoelectric Generators (RTGs) which provide electric power for deep space missions. Each GPHS consists of a 238 Pu oxide ceramic pellet encapsulated in a welded iridium alloy shell which forms a protective barrier against the release of plutonia in the unlikely event of a launch-pad failure or reentry incident. GPHS fueled clad girth weld flaw detection was paramount to ensuring this safety function, and was accomplished using both destructive and non-destructive evaluation techniques. The first girth weld produced from each welding campaign was metallographically examined for flaws such as incomplete weld penetration, cracks, or porosity which would render a GPHS unacceptable for flight applications. After an acceptable example weld was produced, the subsequently welded heat sources were evaluated non-destructively for flaws using ultrasonic immersion testing. Selected heat sources which failed ultrasonic testing would be radiographed, and/or, destructively evaluated to further characterize and document anomalous indications. Metallography was also performed on impacted heat sources to determine the condition of the welds

  6. General purpose nonlinear analysis program FINAS for elevated temperature design of FBR components

    International Nuclear Information System (INIS)

    Iwata, K.; Atsumo, H.; Kano, T.; Takeda, H.

    1982-01-01

    This paper presents currently available capabilities of a general purpose finite element nonlinear analysis program FINAS (FBR Inelastic Structural Analysis System) which has been developed at Power Reactor and Nuclear Fuel Development Corporation (PNC) since 1976 to support structural design of fast breeder reactor (FBR) components in Japan. This program is capable of treating inelastic responses of arbitrary complex structures subjected to static and dynamic load histories. Various types of finite element covering rods, beams, pipes, axisymmetric, two and three dimensional solids, plates and shells, are implemented in the program. The thermal elastic-plastic creep analysis is possible for each element type, with primary emphasis on the application to FBR components subjected to sustained or cyclic loads at elevated temperature. The program permits large deformation, buckling, fracture mechanics, and dynamic analyses for some of the element types and provides a number of options for automatic mesh generation and computer graphics. Some examples including elevated temperature effects are shown to demonstrate the accuracy and the efficiency of the program

  7. Nondestructive inspection of General Purpose Heat Source (GPHS) fueled clad girth welds

    International Nuclear Information System (INIS)

    Reimus, M. A. H.; George, T. G.; Lynch, C.; Padilla, M.; Moniz, P.; Guerrero, A.; Moyer, M. W.; Placr, A.

    1998-01-01

    The General-Purpose Heat Source (GPHS) provides power for space missions by transmitting the heat of 238 Pu decay to an array of thermoelectric elements. The GPHS is fabricated using an iridium-alloy to contain the 238 PuO 2 fuel pellet. GPHS capsules will be utilized in the upcoming Cassini mission to explore Saturn and its moons. The physical integrity of the girth weld is important to mission safety and performance. Because past experience had revealed a potential for initiation of small cracks in the girth weld overlap zone, a nondestructive inspection of each capsule weld is required. An ultrasonic method was used to inspect the welds of capsules fabricated for the Galileo mission. The instrument, transducer, and method used were state of the art at the time (early 1980s). The ultrasonic instrumentation and methods used to inspect the Cassini GPHSs was significantly upgraded from those used for the Galileo mission. GPHSs that had ultrasonic reflectors in excess of the reject specification level were subsequently inspected with radiography to provide additional engineering data used to accept/reject the heat source. This paper describes the Galileo-era ultrasonic instrumentation and methods and the subsequent upgrades made to support testing of Cassini GPHSs. Also discussed is the data obtained from radiographic examination and correlation to ultrasonic examination results

  8. Nondestructive inspection of General Purpose Heat Source (GPHS) fueled clad girth welds

    International Nuclear Information System (INIS)

    Reimus, M.A.; George, T.G.; Lynch, C.; Padilla, M.; Moniz, P.; Guerrero, A.; Moyer, M.W.; Placr, A.

    1998-01-01

    The General-Purpose Heat Source (GPHS) provides power for space missions by transmitting the heat of 238 Pu decay to an array of thermoelectric elements. The GPHS is fabricated using an iridium-alloy to contain the 238 PuO 2 fuel pellet. GPHS capsules will be utilized in the upcoming Cassini mission to explore Saturn and its moons. The physical integrity of the girth weld is important to mission safety and performance. Because past experience had revealed a potential for initiation of small cracks in the girth weld overlap zone, a nondestructive inspection of each capsule weld is required. An ultrasonic method was used to inspect the welds of capsules fabricated for the Galileo mission. The instrument, transducer, and method used were state of the art at the time (early 1980s). The ultrasonic instrumentation and methods used to inspect the Cassini GPHSs was significantly upgraded from those used for the Galileo mission. GPHSs that had ultrasonic reflectors in excess of the reject specification level were subsequently inspected with radiography to provide additional engineering data used to accept/reject the heat source. This paper describes the Galileo-era ultrasonic instrumentation and methods and the subsequent upgrades made to support testing of Cassini GPHSs. Also discussed is the data obtained from radiographic examination and correlation to ultrasonic examination results. copyright 1998 American Institute of Physics

  9. Applications of artificial intelligence to space station: General purpose intelligent sensor interface

    Science.gov (United States)

    Mckee, James W.

    1988-01-01

    This final report describes the accomplishments of the General Purpose Intelligent Sensor Interface task of the Applications of Artificial Intelligence to Space Station grant for the period from October 1, 1987 through September 30, 1988. Portions of the First Biannual Report not revised will not be included but only referenced. The goal is to develop an intelligent sensor system that will simplify the design and development of expert systems using sensors of the physical phenomena as a source of data. This research will concentrate on the integration of image processing sensors and voice processing sensors with a computer designed for expert system development. The result of this research will be the design and documentation of a system in which the user will not need to be an expert in such areas as image processing algorithms, local area networks, image processor hardware selection or interfacing, television camera selection, voice recognition hardware selection, or analog signal processing. The user will be able to access data from video or voice sensors through standard LISP statements without any need to know about the sensor hardware or software.

  10. Low-cost general purpose spectral display unit using an IBM PC

    International Nuclear Information System (INIS)

    Robinson, S.L.

    1985-10-01

    Many physics experiments require acquisition and analysis of spectral data. commercial minicomputer-based multichannel analyzers collect detected counts at various energies, create a histogram of the counts in memory, and display the resultant spectra. They acquire data and provide the user-to-display interface. The system discussed separates functions into the three modular components of data acquisition, storage, and display. This decoupling of functions allows the experimenter to use any number of detectors for data collection before forwarding up to 64 spectra to the display unit, thereby increasing data throughput over that available with commercial systems. An IBM PC was chosen for the low-cost, general purpose display unit. Up to four spectra may be displayed simultaneously in different colors. The histogram saves 1024 channels per detector, 640 of which may be distinctly displayed per spectra. The IEEE-488 standard provides the data path between the IBM PC and the data collection unit. Data is sent to the PC under interrupt control, using direct memory access. Display manipulations available via keyboard are also discussed

  11. General-Purpose Heat Source Development: Safety Test Program. Postimpact evaluation, Design Iteration Test 3

    International Nuclear Information System (INIS)

    Schonfeld, F.W.; George, T.G.

    1984-07-01

    The General-Purpose Heat Source(GPHS) provides power for space missions by transmitting the heat of 238 PuO 2 decay to thermoelectric elements. Because of the inevitable return of certain aborted missions, the heat source must be designed and constructed to survive both re-entry and Earth impact. The Design Iteration Test (DIT) series is part of an ongoing test program. In the third test (DIT-3), a full GPHS module was impacted at 58 m/s and 930 0 C. The module impacted the target at an angle of 30 0 to the pole of the large faces. The four capsules used in DIT-3 survived impact with minimal deformation; no internal cracks other than in the regions indicated by Savannah River Plant (SRP) preimpact nondestructive testing were observed in any of the capsules. The 30 0 impact orientation used in DIT-3 was considerably less severe than the flat-on impact utilized in DIT-1 and DIT-2. The four capsules used in DIT-1 survived, while two of the capsules used in DIT-2 breached; a small quantity (approx. = 50 μg) of 238 PuO 2 was released from the capsules breached in the DIT-2 impact. All of the capsules used in DIT-1 and DIT-2 were severely deformed and contained large internal cracks. Postimpact analyses of the DIT-3 test components are described, with emphasis on weld structure and the behavior of defects identified by SRP nondestructive testing

  12. ICECAP: an integrated, general-purpose, automation-assisted IC50/EC50 assay platform.

    Science.gov (United States)

    Li, Ming; Chou, Judy; King, Kristopher W; Jing, Jing; Wei, Dong; Yang, Liyu

    2015-02-01

    IC50 and EC50 values are commonly used to evaluate drug potency. Mass spectrometry (MS)-centric bioanalytical and biomarker labs are now conducting IC50/EC50 assays, which, if done manually, are tedious and error-prone. Existing bioanalytical sample preparation automation systems cannot meet IC50/EC50 assay throughput demand. A general-purpose, automation-assisted IC50/EC50 assay platform was developed to automate the calculations of spiking solutions and the matrix solutions preparation scheme, the actual spiking and matrix solutions preparations, as well as the flexible sample extraction procedures after incubation. In addition, the platform also automates the data extraction, nonlinear regression curve fitting, computation of IC50/EC50 values, graphing, and reporting. The automation-assisted IC50/EC50 assay platform can process the whole class of assays of varying assay conditions. In each run, the system can handle up to 32 compounds and up to 10 concentration levels per compound, and it greatly improves IC50/EC50 assay experimental productivity and data processing efficiency. © 2014 Society for Laboratory Automation and Screening.

  13. A Fast General-Purpose Clustering Algorithm Based on FPGAs for High-Throughput Data Processing

    CERN Document Server

    Annovi, A; The ATLAS collaboration; Castegnaro, A; Gatta, M

    2012-01-01

    We present a fast general-purpose algorithm for high-throughput clustering of data ”with a two dimensional organization”. The algorithm is designed to be implemented with FPGAs or custom electronics. The key feature is a processing time that scales linearly with the amount of data to be processed. This means that clustering can be performed in pipeline with the readout, without suffering from combinatorial delays due to looping multiple times through all the data. This feature makes this algorithm especially well suited for problems where the data has high density, e.g. in the case of tracking devices working under high-luminosity condition such as those of LHC or Super-LHC. The algorithm is organized in two steps: the first step (core) clusters the data; the second step analyzes each cluster of data to extract the desired information. The current algorithm is developed as a clustering device for modern high-energy physics pixel detectors. However, the algorithm has much broader field of applications. In ...

  14. Explosion overpressure test series: General-Purpose Heat Source development: Safety Verification Test program

    International Nuclear Information System (INIS)

    Cull, T.A.; George, T.G.; Pavone, D.

    1986-09-01

    The General-Purpose Heat Source (GPHS) is a modular, radioisotope heat source that will be used in radioisotope thermoelectric generators (RTGs) to supply electric power for space missions. The first two uses will be the NASA Galileo and the ESA Ulysses missions. The RTG for these missions will contain 18 GPHS modules, each of which contains four 238 PuO 2 -fueled clads and generates 250 W/sub (t)/. A series of Safety Verification Tests (SVTs) was conducted to assess the ability of the GPHS modules to contain the plutonia in accident environments. Because a launch pad or postlaunch explosion of the Space Transportation System vehicle (space shuttle) is a conceivable accident, the SVT plan included a series of tests that simulated the overpressure exposure the RTG and GPHS modules could experience in such an event. Results of these tests, in which we used depleted UO 2 as a fuel simulant, suggest that exposure to overpressures as high as 15.2 MPa (2200 psi), without subsequent impact, does not result in a release of fuel

  15. A low-cost general purpose spectral display unit using an IBM PC

    International Nuclear Information System (INIS)

    Robinson, S.L.

    1986-01-01

    Many physics experiments require acquisition and analysis of spectral data. Commercial minicomputer-based multichannel analyzers collect detected counts at various energies, create a histogram of the counts in memory, and display the resultant spectra. They acquire data and provide the user-to-display interface. The system discussed separates functions into the three modular components of data acquisition, storage, and display. This decoupling of functions allows the experimenter to use any number of detectors for data collection before forwarding up to 64 spectra to the display unit, thereby increasing data throughput over that available with commercial systems. An IBM PC was chosen for the low-cost, general purpose display unit. Up to four spectra may be displayed simultaneously in different colors. The histogram saves 1024 channels per detector, 640 of which may be distinctly displayed per spectra. The IEEE-488 standard provides the data path between the IBM PC and the data collection unit. Data is sent to the PC under interrupt control, using direct memory access. Display manipulations available via keyboard are also discussed

  16. General-purpose heat source project and space nuclear safety and fuels program. Progress report

    International Nuclear Information System (INIS)

    Maraman, W.J.

    1980-02-01

    Studies related to the use of 238 PuO 2 in radioisotopic power systems carried out for the Advanced Nuclear Systems and Projects Division of LASL are presented. The three programs involved are: general-purpose heat source development; space nuclear safety; and fuels program. Three impact tests were conducted to evaluate the effects of a high temperature reentry pulse and the use of CBCF on impact performance. Additionally, two 238 PuO 2 pellets were encapsulated in Ir-0.3% W for impact testing. Results of the clad development test and vent testing are noted. Results of the environmental tests are summarized. Progress on the Stirling isotope power systems test and the status of the improved MHW tests are indicated. The examination of the impact failure of the iridium shell of MHFT-65 at a fuel pass-through continued. A test plan was written for vibration testing of the assembled light-weight radioisotopic heater unit. Progress on fuel processing is reported

  17. Computing OpenSURF on OpenCL and General Purpose GPU

    Directory of Open Access Journals (Sweden)

    Wanglong Yan

    2013-10-01

    Full Text Available Speeded-Up Robust Feature (SURF algorithm is widely used for image feature detecting and matching in computer vision area. Open Computing Language (OpenCL is a framework for writing programs that execute across heterogeneous platforms consisting of CPUs, GPUs, and other processors. This paper introduces how to implement an open-sourced SURF program, namely OpenSURF, on general purpose GPU by OpenCL, and discusses the optimizations in terms of the thread architectures and memory models in detail. Our final OpenCL implementation of OpenSURF is on average 37% and 64% faster than the OpenCV SURF v2.4.5 CUDA implementation on NVidia's GTX660 and GTX460SE GPUs, repectively. Our OpenCL program achieved real-time performance (>25 Frames Per Second for almost all the input images with different sizes from 320*240 to 1024*768 on NVidia's GTX660 GPU, NVidia's GTX460SE GPU and AMD's Radeon HD 6850 GPU. Our OpenCL approach on NVidia's GTX660 GPU is more than 22.8 times faster than its original CPU version on Intel's Dual-Core E5400 2.7G on average.

  18. Geometric correction of radiographic images using general purpose image processing program

    International Nuclear Information System (INIS)

    Kim, Eun Kyung; Cheong, Ji Seong; Lee, Sang Hoon

    1994-01-01

    The present study was undertaken to compare geometric corrected image by general-purpose image processing program for the Apple Macintosh II computer (NIH Image, Adobe Photoshop) with standardized image by individualized custom fabricated alignment instrument. Two non-standardized periapical films with XCP film holder only were taken at the lower molar portion of 19 volunteers. Two standardized periapical films with customized XCP film holder with impression material on the bite-block were taken for each person. Geometric correction was performed with Adobe Photoshop and NIH Image program. Specially, arbitrary image rotation function of 'Adobe Photoshop' and subtraction with transparency function of 'NIH Image' were utilized. The standard deviations of grey values of subtracted images were used to measure image similarity. Average standard deviation of grey values of subtracted images if standardized group was slightly lower than that of corrected group. However, the difference was found to be statistically insignificant (p>0.05). It is considered that we can use 'NIH Image' and 'Adobe Photoshop' program for correction of nonstandardized film, taken with XCP film holder at lower molar portion.

  19. Design evolution and verification of the general-purpose heat source

    International Nuclear Information System (INIS)

    Schock, A.

    The General-Purpose Heat Source (GPHS) is a radioisotope heat source for use in space power systems. It employs a modular design, to make it adaptable to a wide range of energy conversion systems and power levels. Each 250 W module is completely autonomous, with its own passive safety provisions to prevent fuel release under all abort modes, including atmospheric reentry and earth impact. Prior development tests had demonstrated good impact survival as long as the iridium fuel capsules retained their ductility. This requires high impact temperatures, typically above 900 0 C and reasonably fine grain size, which in turn requires avoidance of excessive operating temperatures and reentry temperatures. These three requirements - on operating, reentry, and impact temperatures - are in mutual conflict, since thermal design changes to improve any one of these temperatures tend to worsen one or both of the others. This conflict creates a difficult design problem, which for a time threatened the success of the program. The present paper describes how this problem was overcome by successive design revisions, supplemented by thermal analyses and confirmatory vibration and impact tests; and how this may be achieved while raising the specific power of the GPHS to 83 W/lb, a 50% improvement over previously flown radioisotope heat sources

  20. 21 CFR 1240.80 - General requirements for water for drinking and culinary purposes.

    Science.gov (United States)

    2010-04-01

    ... culinary purposes. 1240.80 Section 1240.80 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF... requirements for water for drinking and culinary purposes. Only potable water shall be provided for drinking and culinary purposes by any operator of a conveyance engaged in interstate traffic, except as...

  1. Upscaling from research watersheds: an essential stage of trustworthy general-purpose hydrologic model building

    Science.gov (United States)

    McNamara, J. P.; Semenova, O.; Restrepo, P. J.

    2011-12-01

    Highly instrumented research watersheds provide excellent opportunities for investigating hydrologic processes. A danger, however, is that the processes observed at a particular research watershed are too specific to the watershed and not representative even of the larger scale watershed that contains that particular research watershed. Thus, models developed based on those partial observations may not be suitable for general hydrologic use. Therefore demonstrating the upscaling of hydrologic process from research watersheds to larger watersheds is essential to validate concepts and test model structure. The Hydrograph model has been developed as a general-purpose process-based hydrologic distributed system. In its applications and further development we evaluate the scaling of model concepts and parameters in a wide range of hydrologic landscapes. All models, either lumped or distributed, are based on a discretization concept. It is common practice that watersheds are discretized into so called hydrologic units or hydrologic landscapes possessing assumed homogeneous hydrologic functioning. If a model structure is fixed, the difference in hydrologic functioning (difference in hydrologic landscapes) should be reflected by a specific set of model parameters. Research watersheds provide the possibility for reasonable detailed combining of processes into some typical hydrologic concept such as hydrologic units, hydrologic forms, and runoff formation complexes in the Hydrograph model. And here by upscaling we imply not the upscaling of a single process but upscaling of such unified hydrologic functioning. The simulation of runoff processes for the Dry Creek research watershed, Idaho, USA (27 km2) was undertaken using the Hydrograph model. The information on the watershed was provided by Boise State University and included a GIS database of watershed characteristics and a detailed hydrometeorological observational dataset. The model provided good simulation results in

  2. A general-purpose development environment for intelligent computer-aided training systems

    Science.gov (United States)

    Savely, Robert T.

    1990-01-01

    Space station training will be a major task, requiring the creation of large numbers of simulation-based training systems for crew, flight controllers, and ground-based support personnel. Given the long duration of space station missions and the large number of activities supported by the space station, the extension of space shuttle training methods to space station training may prove to be impractical. The application of artificial intelligence technology to simulation training can provide the ability to deliver individualized training to large numbers of personnel in a distributed workstation environment. The principal objective of this project is the creation of a software development environment which can be used to build intelligent training systems for procedural tasks associated with the operation of the space station. Current NASA Johnson Space Center projects and joint projects with other NASA operational centers will result in specific training systems for existing space shuttle crew, ground support personnel, and flight controller tasks. Concurrently with the creation of these systems, a general-purpose development environment for intelligent computer-aided training systems will be built. Such an environment would permit the rapid production, delivery, and evolution of training systems for space station crew, flight controllers, and other support personnel. The widespread use of such systems will serve to preserve task and training expertise, support the training of many personnel in a distributed manner, and ensure the uniformity and verifiability of training experiences. As a result, significant reductions in training costs can be realized while safety and the probability of mission success can be enhanced.

  3. An auxiliary frequency tracking system for general purpose lock-in amplifiers

    Science.gov (United States)

    Xie, Kai; Chen, Liuhao; Huang, Anfeng; Zhao, Kai; Zhang, Hanlu

    2018-04-01

    Lock-in amplifiers (LIAs) are designed to measure weak signals submerged by noise. This is achieved with a signal modulator to avoid low-frequency noise and a narrow-band filter to suppress out-of-band noise. In asynchronous measurement, even a slight frequency deviation between the modulator and the reference may lead to measurement error because the filter’s passband is not flat. Because many commercial LIAs are unable to track frequency deviations, in this paper we propose an auxiliary frequency tracking system. We analyze the measurement error caused by the frequency deviation and propose both a tracking method and an auto-tracking system. This approach requires only three basic parameters, which can be obtained from any general purpose LIA via its communications interface, to calculate the frequency deviation from the phase difference. The proposed auxiliary tracking system is designed as a peripheral connected to the LIA’s serial port, removing the need for an additional power supply. The test results verified the effectiveness of the proposed system; the modified commercial LIA (model SR-850) was able to track the frequency deviation and continuous drift. For step frequency deviations, a steady tracking error of less than 0.001% was achieved within three adjustments, and the worst tracking accuracy was still better than 0.1% for a continuous frequency drift. The tracking system can be used to expand the application scope of commercial LIAs, especially for remote measurements in which the modulation clock and the local reference are separated.

  4. Use of a general-purpose heat-transfer code for casting simulation

    International Nuclear Information System (INIS)

    Erickson, W.C.

    1975-07-01

    The practical use of numerical techniques in simulating casting solidification dictate that a general purpose heat transfer code be used and that results be obtained in an easy-to-analyze format. Color film plotting routines were developed for use with NASA's CINDA-3G heat transfer code; the combination of which meet the above criteria. The subroutine LQSLTR written for SINDA, the successor to CINDA-3G, was verified by comparing calculated results obtained using LQSLTR with those obtained using the specific heat method for handling the heat of fusion. Excellent agreement existed when similar data was used. When the more restrictive requirement of a 1 0 F melting range was used, comparable results were obtained. Uranium and lead rod castings were cast in instrumented graphite molds and the solidification sequence simulated using CINDA-3G. Discrepancies attributed to initial assumptions of instantaneous mold filling, uniform melt temperature, and intimate metal/mold contact were encountered. Further calculations using a model incorporating a gap between the mold and casting showed that the intimate contact assumption could not be used; a three-dimensional model also showed that the thermocouple assemblies used with the platinum--platinum-10 percent rhodium were a significant perturbation to the system. An L-shaped steel casting was simulated and the results compared to those reported in the literature. The experimental data for this casting were reproduced within the accuracy permitted by the thermal conductivity of the sand, thus demonstrating that agreement can be obtained when the mold material does not act as a chill. (U.S.)

  5. VHS-tape system for general purpose computer. For next generation mass storage system

    International Nuclear Information System (INIS)

    Ukai, K.; Takano, M.; Shinohara, M.; Niki, K.; Suzuki, Y.; Hamada, T.; Ogawa, M.

    1994-07-01

    Mass storage is one of the key technology of next generation computer system. A huge amount of data is produced on a field of particle and nuclear physics. These data are raw data of experiments, analysis data, Monte Carlo simulations data, etc. We search a storage device for these data at the point of view of capacity, price, size, transfer speed, etc. We have selected a VHS-tape (12.7 mm-tape, helical scan) from many storage devices. Characteristics of the VHS-tape are as follows; capacity of 14.5 GB, size of 460 cm 3 , price of 1,000 yen (S-VHS tape for video use), and 1.996 MB/sec transfer speed at a sustained mode. Last year, we succeeded to operate the VHS-tape system on a workstation as a I/O device with read/write speed of 1.5 MB/sec. We have tested a VHS-tape system by connecting to the channel of the general purpose computer (Fujitsu M-780/10S) in our institute. We obtained a read and write speeds of 1.07 MB/sec and 1.72 MB/sec by FORTRAN test programs, respectively. Read speeds of an open reel tape and a 3480 type cassete tape by the same test programs are 1.13 MB/sec and 2.54 MB/sec, respectively. Speeds of write operation are 1.09 MB/sec and 2.54 MB/sec for the open reel and 3480 cassete tape, respectively. A start motion of the VHS-tape for read/write operations needs about 60 seconds. (author)

  6. Utilizing General Purpose Graphics Processing Units to Improve Performance of Computer Modelling and Visualization

    Science.gov (United States)

    Monk, J.; Zhu, Y.; Koons, P. O.; Segee, B. E.

    2009-12-01

    With the introduction of the G8X series of cards by nVidia an architecture called CUDA was released, virtually all subsequent video cards have had CUDA support. With this new architecture nVidia provided extensions for C/C++ that create an Application Programming Interface (API) allowing code to be executed on the GPU. Since then the concept of GPGPU (general purpose graphics processing unit) has been growing, this is the concept that the GPU is very good a algebra and running things in parallel so we should take use of that power for other applications. This is highly appealing in the area of geodynamic modeling, as multiple parallel solutions of the same differential equations at different points in space leads to a large speedup in simulation speed. Another benefit of CUDA is a programmatic method of transferring large amounts of data between the computer's main memory and the dedicated GPU memory located on the video card. In addition to being able to compute and render on the video card, the CUDA framework allows for a large speedup in the situation, such as with a tiled display wall, where the rendered pixels are to be displayed in a different location than where they are rendered. A CUDA extension for VirtualGL was developed allowing for faster read back at high resolutions. This paper examines several aspects of rendering OpenGL graphics on large displays using VirtualGL and VNC. It demonstrates how performance can be significantly improved in rendering on a tiled monitor wall. We present a CUDA enhanced version of VirtualGL as well as the advantages to having multiple VNC servers. It will discuss restrictions caused by read back and blitting rates and how they are affected by different sizes of virtual displays being rendered.

  7. Holographic Spherically Symmetric Metrics

    Science.gov (United States)

    Petri, Michael

    The holographic principle (HP) conjectures, that the maximum number of degrees of freedom of any realistic physical system is proportional to the system's boundary area. The HP has its roots in the study of black holes. It has recently been applied to cosmological solutions. In this article we apply the HP to spherically symmetric static space-times. We find that any regular spherically symmetric object saturating the HP is subject to tight constraints on the (interior) metric, energy-density, temperature and entropy-density. Whenever gravity can be described by a metric theory, gravity is macroscopically scale invariant and the laws of thermodynamics hold locally and globally, the (interior) metric of a regular holographic object is uniquely determined up to a constant factor and the interior matter-state must follow well defined scaling relations. When the metric theory of gravity is general relativity, the interior matter has an overall string equation of state (EOS) and a unique total energy-density. Thus the holographic metric derived in this article can serve as simple interior 4D realization of Mathur's string fuzzball proposal. Some properties of the holographic metric and its possible experimental verification are discussed. The geodesics of the holographic metric describe an isotropically expanding (or contracting) universe with a nearly homogeneous matter-distribution within the local Hubble volume. Due to the overall string EOS the active gravitational mass-density is zero, resulting in a coasting expansion with Ht = 1, which is compatible with the recent GRB-data.

  8. Remarks on G-Metric Spaces

    Directory of Open Access Journals (Sweden)

    Bessem Samet

    2013-01-01

    Full Text Available In 2005, Mustafa and Sims (2006 introduced and studied a new class of generalized metric spaces, which are called G-metric spaces, as a generalization of metric spaces. We establish some useful propositions to show that many fixed point theorems on (nonsymmetric G-metric spaces given recently by many authors follow directly from well-known theorems on metric spaces. Our technique can be easily extended to other results as shown in application.

  9. Apple-CORE: Microgrids of SVP cores: flexible, general-purpose, fine-grained hardware concurrency management

    NARCIS (Netherlands)

    Poss, R.; Lankamp, M.; Yang, Q.; Fu, J.; van Tol, M.W.; Jesshope, C.; Nair, S.

    2012-01-01

    To harness the potential of CMPs for scalable, energy-efficient performance in general-purpose computers, the Apple-CORE project has co-designed a general machine model and concurrency control interface with dedicated hardware support for concurrency control across multiple cores. Its SVP interface

  10. Variable Conductance Heat Pipe Cooling of Stirling Convertor and General Purpose Heat Source

    Science.gov (United States)

    Tarau, Calin; Schwendeman, Carl; Anderson, William G.; Cornell, Peggy A.; Schifer, Nicholas A.

    2013-01-01

    In a Stirling Radioisotope Power System (RPS), heat must be continuously removed from the General Purpose Heat Source (GPHS) modules to maintain the modules and surrounding insulation at acceptable temperatures. The Stirling convertor normally provides this cooling. If the Stirling convertor stops in the current system, the insulation is designed to spoil, preventing damage to the GPHS at the cost of an early termination of the mission. An alkali-metal Variable Conductance Heat Pipe (VCHP) can be used to passively allow multiple stops and restarts of the Stirling convertor. In a previous NASA SBIR Program, Advanced Cooling Technologies, Inc. (ACT) developed a series of sodium VCHPs as backup cooling systems for Stirling RPS. The operation of these VCHPs was demonstrated using Stirling heater head simulators and GPHS simulators. In the most recent effort, a sodium VCHP with a stainless steel envelope was designed, fabricated and tested at NASA Glenn Research Center (GRC) with a Stirling convertor for two concepts; one for the Advanced Stirling Radioisotope Generator (ASRG) back up cooling system and one for the Long-lived Venus Lander thermal management system. The VCHP is designed to activate and remove heat from the stopped convertor at a 19 degC temperature increase from the nominal vapor temperature. The 19 degC temperature increase from nominal is low enough to avoid risking standard ASRG operation and spoiling of the Multi-Layer Insulation (MLI). In addition, the same backup cooling system can be applied to the Stirling convertor used for the refrigeration system of the Long-lived Venus Lander. The VCHP will allow the refrigeration system to: 1) rest during transit at a lower temperature than nominal; 2) pre-cool the modules to an even lower temperature before the entry in Venus atmosphere; 3) work at nominal temperature on Venus surface; 4) briefly stop multiple times on the Venus surface to allow scientific measurements. This paper presents the experimental

  11. The Chronic Kidney Disease Model: A General Purpose Model of Disease Progression and Treatment

    Directory of Open Access Journals (Sweden)

    Patel Uptal D

    2011-06-01

    Full Text Available Abstract Background Chronic kidney disease (CKD is the focus of recent national policy efforts; however, decision makers must account for multiple therapeutic options, comorbidities and complications. The objective of the Chronic Kidney Disease model is to provide guidance to decision makers. We describe this model and give an example of how it can inform clinical and policy decisions. Methods Monte Carlo simulation of CKD natural history and treatment. Health states include myocardial infarction, stroke with and without disability, congestive heart failure, CKD stages 1-5, bone disease, dialysis, transplant and death. Each cycle is 1 month. Projections account for race, age, gender, diabetes, proteinuria, hypertension, cardiac disease, and CKD stage. Treatment strategies include hypertension control, diabetes control, use of HMG-CoA reductase inhibitors, use of angiotensin converting enzyme inhibitors, nephrology specialty care, CKD screening, and a combination of these. The model architecture is flexible permitting updates as new data become available. The primary outcome is quality adjusted life years (QALYs. Secondary outcomes include health state events and CKD progression rate. Results The model was validated for GFR change/year -3.0 ± 1.9 vs. -1.7 ± 3.4 (in the AASK trial, and annual myocardial infarction and mortality rates 3.6 ± 0.9% and 1.6 ± 0.5% vs. 4.4% and 1.6% in the Go study. To illustrate the model's utility we estimated lifetime impact of a hypothetical treatment for primary prevention of vascular disease. As vascular risk declined, QALY improved but risk of dialysis increased. At baseline, 20% and 60% reduction: QALYs = 17.6, 18.2, and 19.0 and dialysis = 7.7%, 8.1%, and 10.4%, respectively. Conclusions The CKD Model is a valid, general purpose model intended as a resource to inform clinical and policy decisions improving CKD care. Its value as a tool is illustrated in our example which projects a relationship between

  12. Quantitative comparison using Generalized Relative Object Detectability (G-ROD) metrics of an amorphous selenium detector with high resolution Microangiographic Fluoroscopes (MAF) and standard flat panel detectors (FPD).

    Science.gov (United States)

    Russ, M; Shankar, A; Jain, A; Setlur Nagesh, S V; Ionita, C N; Scott, C; Karim, K S; Bednarek, D R; Rudin, S

    2016-02-27

    A novel amorphous selenium (a-Se) direct detector with CMOS readout has been designed, and relative detector performance investigated. The detector features include a 25 μ m pixel pitch, and 1000 μ m thick a-Se layer operating at 10V/ μ m bias field. A simulated detector DQE was determined, and used in comparative calculations of the Relative Object Detectability (ROD) family of prewhitening matched-filter (PWMF) observer and non-prewhitening matched filter (NPWMF) observer model metrics to gauge a-Se detector performance against existing high resolution micro-angiographic fluoroscopic (MAF) detectors and a standard flat panel detector (FPD). The PWMF-ROD or ROD metric compares two x-ray imaging detectors in their relative abilities in imaging a given object by taking the integral over spatial frequencies of the Fourier transform of the detector DQE weighted by an object function, divided by the comparable integral for a different detector. The generalized-ROD (G-ROD) metric incorporates clinically relevant parameters (focal-spot size, magnification, and scatter) to show the degradation in imaging performance for detectors that are part of an imaging chain. Preliminary ROD calculations using simulated spheres as the object predicted superior imaging performance by the a-Se detector as compared to existing detectors. New PWMF-G-ROD and NPWMF-G-ROD results still indicate better performance by the a-Se detector in an imaging chain over all sphere sizes for various focal spot sizes and magnifications, although a-Se performance advantages were degraded by focal spot blurring. Nevertheless, the a-Se technology has great potential to provide breakthrough abilities such as visualization of fine details including of neuro-vascular perforator vessels and of small vascular devices.

  13. Metric learning

    CERN Document Server

    Bellet, Aurelien; Sebban, Marc

    2015-01-01

    Similarity between objects plays an important role in both human cognitive processes and artificial systems for recognition and categorization. How to appropriately measure such similarities for a given task is crucial to the performance of many machine learning, pattern recognition and data mining methods. This book is devoted to metric learning, a set of techniques to automatically learn similarity and distance functions from data that has attracted a lot of interest in machine learning and related fields in the past ten years. In this book, we provide a thorough review of the metric learnin

  14. Usefulness of the Population Health Metrics Research Consortium gold standard verbal autopsy data for general verbal autopsy methods

    Science.gov (United States)

    2014-01-01

    Background Verbal Autopsy (VA) is widely viewed as the only immediate strategy for registering cause of death in much of Africa and Asia, where routine physician certification of deaths is not widely practiced. VA involves a lay interview with family or friends after a death, to record essential details of the circumstances. These data can then be processed automatically to arrive at standardized cause of death information. Methods The Population Health Metrics Research Consortium (PHMRC) undertook a study at six tertiary hospitals in low- and middle-income countries which documented over 12,000 deaths clinically and subsequently undertook VA interviews. This dataset, now in the public domain, was compared with the WHO 2012 VA standard and the InterVA-4 interpretative model. Results The PHMRC data covered 70% of the WHO 2012 VA input indicators, and categorized cause of death according to PHMRC definitions. After eliminating some problematic or incomplete records, 11,984 VAs were compared. Some of the PHMRC cause definitions, such as ‘preterm delivery’, differed substantially from the International Classification of Diseases, version 10 equivalent. There were some appreciable inconsistencies between the hospital and VA data, including 20% of the hospital maternal deaths being described as non-pregnant in the VA data. A high proportion of VA cases (66%) reported respiratory symptoms, but only 18% of assigned hospital causes were respiratory-related. Despite these issues, the concordance correlation coefficient between hospital and InterVA-4 cause of death categories was 0.61. Conclusions The PHMRC dataset is a valuable reference source for VA methods, but has to be interpreted with care. Inherently inconsistent cases should not be included when using these data to build other VA models. Conversely, models built from these data should be independently evaluated. It is important to distinguish between the internal and external validity of VA models. The effects of

  15. The geometry of generalized force matching and related information metrics in coarse-graining of molecular systems

    International Nuclear Information System (INIS)

    Kalligiannaki, Evangelia; Harmandaris, Vagelis; Katsoulakis, Markos A.; Plecháč, Petr

    2015-01-01

    Using the probabilistic language of conditional expectations, we reformulate the force matching method for coarse-graining of molecular systems as a projection onto spaces of coarse observables. A practical outcome of this probabilistic description is the link of the force matching method with thermodynamic integration. This connection provides a way to systematically construct a local mean force and to optimally approximate the potential of mean force through force matching. We introduce a generalized force matching condition for the local mean force in the sense that allows the approximation of the potential of mean force under both linear and non-linear coarse graining mappings (e.g., reaction coordinates, end-to-end length of chains). Furthermore, we study the equivalence of force matching with relative entropy minimization which we derive for general non-linear coarse graining maps. We present in detail the generalized force matching condition through applications to specific examples in molecular systems

  16. The geometry of generalized force matching and related information metrics in coarse-graining of molecular systems

    Energy Technology Data Exchange (ETDEWEB)

    Kalligiannaki, Evangelia, E-mail: ekalligian@tem.uoc.gr [Department of Mathematics and Applied Mathematics, University of Crete, 70013 Heraklion (Greece); Harmandaris, Vagelis, E-mail: harman@uoc.gr [Department of Mathematics and Applied Mathematics, University of Crete, 70013 Heraklion (Greece); Institute of Applied and Computational Mathematics (IACM), Foundation for Research and Technology Hellas (FORTH), IACM/FORTH, GR-71110 Heraklion (Greece); Katsoulakis, Markos A., E-mail: markos@math.umass.edu [Department of Mathematics and Statistics, University of Massachusetts, Amherst, Massachusetts 01003 (United States); Plecháč, Petr, E-mail: plechac@math.udel.edu [Department of Mathematical Sciences, University of Delaware, Newark, Delaware 19716 (United States)

    2015-08-28

    Using the probabilistic language of conditional expectations, we reformulate the force matching method for coarse-graining of molecular systems as a projection onto spaces of coarse observables. A practical outcome of this probabilistic description is the link of the force matching method with thermodynamic integration. This connection provides a way to systematically construct a local mean force and to optimally approximate the potential of mean force through force matching. We introduce a generalized force matching condition for the local mean force in the sense that allows the approximation of the potential of mean force under both linear and non-linear coarse graining mappings (e.g., reaction coordinates, end-to-end length of chains). Furthermore, we study the equivalence of force matching with relative entropy minimization which we derive for general non-linear coarse graining maps. We present in detail the generalized force matching condition through applications to specific examples in molecular systems.

  17. Metrics with vanishing quantum corrections

    International Nuclear Information System (INIS)

    Coley, A A; Hervik, S; Gibbons, G W; Pope, C N

    2008-01-01

    We investigate solutions of the classical Einstein or supergravity equations that solve any set of quantum corrected Einstein equations in which the Einstein tensor plus a multiple of the metric is equated to a symmetric conserved tensor T μν (g αβ , ∂ τ g αβ , ∂ τ ∂ σ g αβ , ...,) constructed from sums of terms, the involving contractions of the metric and powers of arbitrary covariant derivatives of the curvature tensor. A classical solution, such as an Einstein metric, is called universal if, when evaluated on that Einstein metric, T μν is a multiple of the metric. A Ricci flat classical solution is called strongly universal if, when evaluated on that Ricci flat metric, T μν vanishes. It is well known that pp-waves in four spacetime dimensions are strongly universal. We focus attention on a natural generalization; Einstein metrics with holonomy Sim(n - 2) in which all scalar invariants are zero or constant. In four dimensions we demonstrate that the generalized Ghanam-Thompson metric is weakly universal and that the Goldberg-Kerr metric is strongly universal; indeed, we show that universality extends to all four-dimensional Sim(2) Einstein metrics. We also discuss generalizations to higher dimensions

  18. Teacher's and Students' Beliefs on English for General Academic Purposes: The Case of Iranian University Students

    Science.gov (United States)

    Kojour, Masoud Kermani; Heirati, Javad Kia

    2015-01-01

    This study was framed in the sociocultural theory to look into the evolution of L2 learners' beliefs about the general English course during a term. One hundred ninety-eight male and female university students and their general English course teacher were randomly selected as the participants of the study. Data were gathered through the…

  19. Parallelized computation for computer simulation of electrocardiograms using personal computers with multi-core CPU and general-purpose GPU.

    Science.gov (United States)

    Shen, Wenfeng; Wei, Daming; Xu, Weimin; Zhu, Xin; Yuan, Shizhong

    2010-10-01

    Biological computations like electrocardiological modelling and simulation usually require high-performance computing environments. This paper introduces an implementation of parallel computation for computer simulation of electrocardiograms (ECGs) in a personal computer environment with an Intel CPU of Core (TM) 2 Quad Q6600 and a GPU of Geforce 8800GT, with software support by OpenMP and CUDA. It was tested in three parallelization device setups: (a) a four-core CPU without a general-purpose GPU, (b) a general-purpose GPU plus 1 core of CPU, and (c) a four-core CPU plus a general-purpose GPU. To effectively take advantage of a multi-core CPU and a general-purpose GPU, an algorithm based on load-prediction dynamic scheduling was developed and applied to setting (c). In the simulation with 1600 time steps, the speedup of the parallel computation as compared to the serial computation was 3.9 in setting (a), 16.8 in setting (b), and 20.0 in setting (c). This study demonstrates that a current PC with a multi-core CPU and a general-purpose GPU provides a good environment for parallel computations in biological modelling and simulation studies. Copyright 2010 Elsevier Ireland Ltd. All rights reserved.

  20. Metric-adjusted skew information

    DEFF Research Database (Denmark)

    Liang, Cai; Hansen, Frank

    2010-01-01

    on a bipartite system and proved superadditivity of the Wigner-Yanase-Dyson skew informations for such states. We extend this result to the general metric-adjusted skew information. We finally show that a recently introduced extension to parameter values 1 ...We give a truly elementary proof of the convexity of metric-adjusted skew information following an idea of Effros. We extend earlier results of weak forms of superadditivity to general metric-adjusted skew information. Recently, Luo and Zhang introduced the notion of semi-quantum states...... of (unbounded) metric-adjusted skew information....

  1. Beyond the "Ivory Tower": Restoring the Balance of Private and Public Purposes of General Education

    Science.gov (United States)

    Cantor, Nancy; Englot, Peter

    2013-01-01

    We in higher education have allowed the balance of the private and public purposes of liberal education to become skewed in our angst over fully embracing a central role in restoring prosperity and preparing our increasingly diverse population for the evolving responsibility of mending our fraying democracy. As we consider how best to reshape…

  2. Factors Affecting Preservice Teachers' Computer Use for General Purposes: Implications for Computer Training Courses

    Science.gov (United States)

    Zogheib, Salah

    2014-01-01

    As the majority of educational research has focused on preservice teachers' computer use for "educational purposes," the question remains: Do preservice teachers use computer technology for daily life activities and encounters? And do preservice teachers' personality traits and motivational beliefs related to computer training provided…

  3. APL/JHU free flight tests of the General Purpose Heat Source module. Testing: 5-7 March 1984

    International Nuclear Information System (INIS)

    Baker, W.M. II.

    1984-01-01

    Purpose of the test was to obtain statistical information on the dynamics of the General Purpose Heat Source (GPHS) module at terminal speeds. Models were designed to aerodynamically and dynamically represent the GPHS module. Normal and high speed photographic coverage documented the motion of the models. This report documents test parameters and techniques for the free-spin tests. It does not include data analysis

  4. Detectability of T1a lung cancer on digital chest radiographs: an observer-performance comparison among 2-megapixel general-purpose, 2-megapixel medical-purpose, and 3-megapixel medical-purpose liquid-crystal display (LCD) monitors.

    Science.gov (United States)

    Yabuuchi, Hidetake; Matsuo, Yoshio; Kamitani, Takeshi; Jinnnouchi, Mikako; Yonezawa, Masato; Yamasaki, Yuzo; Nagao, Michinobu; Kawanami, Satoshi; Okamoto, Tatsuro; Sasaki, Masayuki; Honda, Hiroshi

    2015-08-01

    There has been no comparison of detectability of small lung cancer between general and medical LCD monitors or no comparison of detectability of small lung cancer between solid and part-solid nodules. To compare the detectabilities of T1a lung cancer on chest radiographs on three LCD monitor types: 2-megapixel (MP) for general purpose (General), 2-MP for medical purpose (Medical), and 3-MP-Medical. Radiographs from forty patients with T1aN0M0 primary lung cancer (27 solid nodules, 13 part-solid nodules) and 60 patients with no abnormalities on both chest X-ray and computed tomography (CT) were consecutively collected. Five readers assessed 100 cases for each monitor. The observations were analyzed using receiver operating characteristic (ROC) analysis. A jackknife method was used for statistical analysis. A P value of General, 2-MP-Medical, and 3-MP-Medical LCD monitors were 0.86, 0.89, and 0.89, respectively; there were no significant differences among them. The average AUC for part-solid nodule detection using a 2-MP-General, 2-MP-Medical, and 3-MP-Medical LCD monitors were 0.77, 0.86, and 0.89, respectively. There were significant differences between the 2-MP-General and 2-MP-Medical LCD monitors (P = 0.043) and between the 2-MP-General and 3-MP-Medical LCD monitors (P = 0.027). There was no significant difference between the 2-MP-Medical and 3-MP-Medical LCD monitors. The average AUC for solid nodule detection using a 2-MP-General, 2-MP-Medical, and 3-MP-Medical LCD monitors were 0.90, 0.90, and 0.88, respectively; there were no significant differences among them. The mean AUC values for all and part-solid nodules of the low-experienced readers were significantly lower than those of the high-experienced readers with the 2 M-GP color LCD monitor (P general-purpose LCD monitor was significantly lower than those using medical-purpose LCD monitors. © The Foundation Acta Radiologica 2014.

  5. Metrication manual

    International Nuclear Information System (INIS)

    Harper, A.F.A.; Digby, R.B.; Thong, S.P.; Lacey, F.

    1978-04-01

    In April 1978 a meeting of senior metrication officers convened by the Commonwealth Science Council of the Commonwealth Secretariat, was held in London. The participants were drawn from Australia, Bangladesh, Britain, Canada, Ghana, Guyana, India, Jamaica, Papua New Guinea, Solomon Islands and Trinidad and Tobago. Among other things, the meeting resolved to develop a set of guidelines to assist countries to change to SI and to compile such guidelines in the form of a working manual

  6. The Dynamics of a General Purpose Technology in a Research and Assimilation Model

    NARCIS (Netherlands)

    Nahuis, R.

    1998-01-01

    Where is the productivity growth from the IT revolution? Why did the skill premium rise sharply in the early eighties? Were these phenomena related? This paper examines these questions in a general equilibrium model of growth. Technological progress in firms is driven by research aimed at improving

  7. Accuracy of Surface Plate Measurements - General Purpose Software for Flatness Measurement

    NARCIS (Netherlands)

    Meijer, J.; Heuvelman, C.J.

    1990-01-01

    Flatness departures of surface plates are generally obtained from straightness measurements of lines on the surface. A computer program has been developed for on-line measurement and evaluation, based on the simultaneous coupling of measurements in all grid points. Statistical methods are used to

  8. 41 CFR 60-2.10 - General purpose and contents of affirmative action programs.

    Science.gov (United States)

    2010-07-01

    ... central premise underlying affirmative action is that, absent discrimination, over time a contractor's workforce, generally, will reflect the gender, racial and ethnic profile of the labor pools from which the... include action-oriented programs. If women and minorities are not being employed at a rate to be expected...

  9. A Framework for a General Purpose Intelligent Control System for Particle Accelerators. Phase II Final Report

    International Nuclear Information System (INIS)

    Westervelt, Robert; Klein, William; Kroupa, Michael; Olsson, Eric; Rothrock, Rick

    1999-01-01

    Vista Control Systems, Inc. has developed a portable system for intelligent accelerator control. The design is general in scope and is thus configurable to a wide range of accelerator facilities and control problems. The control system employs a multi-layer organization in which knowledge-based decision making is used to dynamically configure lower level optimization and control algorithms

  10. Sharp metric obstructions for quasi-Einstein metrics

    Science.gov (United States)

    Case, Jeffrey S.

    2013-02-01

    Using the tractor calculus to study smooth metric measure spaces, we adapt results of Gover and Nurowski to give sharp metric obstructions to the existence of quasi-Einstein metrics on suitably generic manifolds. We do this by introducing an analogue of the Weyl tractor W to the setting of smooth metric measure spaces. The obstructions we obtain can be realized as tensorial invariants which are polynomial in the Riemann curvature tensor and its divergence. By taking suitable limits of their tensorial forms, we then find obstructions to the existence of static potentials, generalizing to higher dimensions a result of Bartnik and Tod, and to the existence of potentials for gradient Ricci solitons.

  11. General-Purpose Computation with Neural Networks: A Survey of Complexity Theoretic Results

    Czech Academy of Sciences Publication Activity Database

    Šíma, Jiří; Orponen, P.

    2003-01-01

    Roč. 15, č. 12 (2003), s. 2727-2778 ISSN 0899-7667 R&D Projects: GA AV ČR IAB2030007; GA ČR GA201/02/1456 Institutional research plan: AV0Z1030915 Keywords : computational power * computational complexity * perceptrons * radial basis functions * spiking neurons * feedforward networks * reccurent networks * probabilistic computation * analog computation Subject RIV: BA - General Mathematics Impact factor: 2.747, year: 2003

  12. A Comprehensive Toolset for General-Purpose Private Computing and Outsourcing

    Science.gov (United States)

    2016-12-08

    contexts businesses are also hesitant to make their proprietary available to the cloud [1]. While in general sensitive data can be protected by the...data sources, gathering and maintaining the data needed , and completing and reviewing the collection of information. Send comments regarding this...project and scientific advances made towards each of the research thrusts throughout the project duration. 1 Project Objectives Cloud computing enables

  13. Preparing General Purpose Forces in the United States and British Armies for Counterinsurgent Operations

    Science.gov (United States)

    2010-12-10

    Operations In Iraq: Planning, Combat, And Occupation,” Thomas Ricks’ Fiasco, and reports by Army historian Major Isaiah Wilson, and former CENCTOM J-4...established Multi-National Forces-Iraq, and Lieutenant General Thomas Metz, commander of the Army’s III Corps, assumed the mantle of Multi-National Corps...Donald P. Wright and Colonel Timothy R. Reese or Thomas Ricks’ Fiasco among other books. 18Dr. Carter Malkasian, “Counterinsurgency in Iraq: May 2003

  14. How did the General Purpose Technology ’Electricity’ contribute to the Second Industrial Revolution (I): The Power Engines.

    NARCIS (Netherlands)

    van der Kooij, B.J.G.

    2016-01-01

    The concept of the General Purpose Technology (GPT) of the late 1990s is a culmination of many evolutionairy views in innovation-thinking. By definition the GPT considers the technical, social, and economic effects of meta-technologies like steam-technology and electric technology. This paper uses

  15. [Application of the grayscale standard display function to general purpose liquid-crystal display monitors for clinical use].

    Science.gov (United States)

    Tanaka, Nobukazu; Naka, Kentaro; Sueoka, Masaki; Higashida, Yoshiharu; Morishita, Junji

    2010-01-20

    Interpretations of medical images have been shifting to soft-copy readings with liquid-crystal display (LCD) monitors. The display function of the medical-grade LCD monitor for soft-copy readings is recommended to calibrate the grayscale standard display function (GSDF) in accordance with the guidelines of Japan and other countries. In this study, the luminance and display function of five models of eight general purpose LCD monitors were measured to gain an understanding of their characteristics. Moreover, the display function (gamma 2.2 or gamma 1.8) of general purpose LCD monitors was converted to GSDF through the use of a look-up table, and the detectability of a simulated lung nodule in the chest x-ray image was examined. As a result, the maximum luminance, contrast ratio, and luminance uniformity of general purpose LCD monitors, except for one model of two LCD monitors, met the management grade 1 standard in the guideline JESRA X-0093-2005. In addition, the detectability of simulated lung nodule in the mediastinal space was obviously improved by converting the display function of a general purpose LCD monitor into GSDF.

  16. RUMD: A general purpose molecular dynamics package optimized to utilize GPU hardware down to a few thousand particles

    DEFF Research Database (Denmark)

    Bailey, Nicholas; Ingebrigtsen, Trond; Hansen, Jesper Schmidt

    2017-01-01

    RUMD is a general purpose, high-performance molecular dynamics (MD) simulation package running on graphical processing units (GPU’s). RUMD addresses the challenge of utilizing the many-core nature of modern GPU hardware when simulating small to medium system sizes (roughly from a few thousand up...

  17. How did the General Purpose Technology Electricity contribute to the Second Industrial Revolution (II): The Communication Engines

    NARCIS (Netherlands)

    van der Kooij, B.J.G.

    2017-01-01

    The concept of the General Purpose Technology (GPT) of the late 1990s is a culmination of many evolutionairy views in innovation-thinking. By definition the GPT considers the technical, social, and economic effects of meta-technologies like steam-technology and electric technology. This paper uses

  18. rFerns: An Implementation of the Random Ferns Method for General-Purpose Machine Learning

    Directory of Open Access Journals (Sweden)

    Miron B. Kursa

    2014-11-01

    Full Text Available Random ferns is a very simple yet powerful classification method originally introduced for specific computer vision tasks. In this paper, I show that this algorithm may be considered as a constrained decision tree ensemble and use this interpretation to introduce a series of modifications which enable the use of random ferns in general machine learning problems. Moreover, I extend the method with an internal error approximation and an attribute importance measure based on corresponding features of the random forest algorithm. I also present the R package rFerns containing an efficient implementation of this modified version of random ferns.

  19. ABAQUS/EPGEN - a general purpose finite element code with emphasis on nonlinear applications

    International Nuclear Information System (INIS)

    Hibbitt, H.D.

    1984-01-01

    The article contains a summary description of ABAQUS, a finite element program designed for general use in nonlinear as well as linear structural problems, in the context of its application to nuclear structural integrity analysis. The article begins with a discussion of the design criteria and methods upon which the code development has been based. The engineering modelling capabilities, currently implemented in the program - elements, constitutive models and analysis procedures - are then described. Finally, a few demonstration examples are presented, to illustrate some of the program's features that are of interest in structural integrity analysis associated with nuclear power plants. (orig.)

  20. Working memory training mostly engages general-purpose large-scale networks for learning.

    Science.gov (United States)

    Salmi, Juha; Nyberg, Lars; Laine, Matti

    2018-03-21

    The present meta-analytic study examined brain activation changes following working memory (WM) training, a form of cognitive training that has attracted considerable interest. Comparisons with perceptual-motor (PM) learning revealed that WM training engages domain-general large-scale networks for learning encompassing the dorsal attention and salience networks, sensory areas, and striatum. Also the dynamics of the training-induced brain activation changes within these networks showed a high overlap between WM and PM training. The distinguishing feature for WM training was the consistent modulation of the dorso- and ventrolateral prefrontal cortex (DLPFC/VLPFC) activity. The strongest candidate for mediating transfer to similar untrained WM tasks was the frontostriatal system, showing higher striatal and VLPFC activations, and lower DLPFC activations after training. Modulation of transfer-related areas occurred mostly with longer training periods. Overall, our findings place WM training effects into a general perception-action cycle, where some modulations may depend on the specific cognitive demands of a training task. Copyright © 2018 Elsevier Ltd. All rights reserved.

  1. Reassessment of Resuspension Factor Following Radionuclide Dispersal: Toward a General-purpose Rate Constant

    Energy Technology Data Exchange (ETDEWEB)

    Marshall, Shaun [Worcester Polytechnic Inst., Worcester, MA (United States). Dept. of Physics; Potter, Charles [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Medich, David [Worcester Polytechnic Inst., Worcester, MA (United States). Dept. of Physics

    2018-05-01

    A recent analysis of historical radionuclide resuspension datasets con rmed the general applicability of the Anspaugh and modified Anspaugh models of resuspension factors following both controlled and disastrous releases. The observations appear to increase in variance earlier in time, however all points were equally weighted in statistical fit calculations, inducing a positive skewing of resuspension coeffcients. Such data are extracted from the available deposition experiments spanning 2900 days. Measurements within a 3-day window are grouped into singular sample sets to construct standard deviations. A refitting is performed using a relative instrumental weighting of the observations. The resulting best-fit equations produces tamer exponentials which give decreased integrated resuspension factor values relative to those reported by Anspaugh. As expected, the fits attenuate greater error amongst the data at earlier time. The reevaluation provides a sharper contrast between the empirical models, and reafirms their deficiencies in the short-lived timeframe wherein the dynamics of particulate dispersion dominate the resuspension process.

  2. Reassessment of Resuspension Factor Following Radionuclide Dispersal: Toward a General-purpose Rate Constant.

    Science.gov (United States)

    Marshall, Shaun; Potter, Charles; Medich, David

    2018-05-01

    A recent analysis of historical radionuclide resuspension datasets confirmed the general applicability of the Anspaugh and modified Anspaugh models of resuspension factors following both controlled and disastrous releases. While observations appear to have larger variance earlier in time, previous studies equally weighted the data for statistical fit calculations; this could induce a positive skewing of resuspension coefficients in the early time-period. A refitting is performed using a relative instrumental weighting of the observations. Measurements within a 3-d window are grouped into singular sample sets to construct standard deviations. The resulting best-fit equations produce tamer exponentials, which give decreased integrated resuspension factor values relative to those reported by Anspaugh. As expected, the fits attenuate greater error among the data at earlier time. The reevaluation provides a sharper contrast between the empirical models and reaffirms their deficiencies in the short-lived timeframe wherein the dynamics of particulate dispersion dominate the resuspension process.

  3. Minus 3: a general purpose data acquisition system at LBL's 88''-cyclotron and superhilac

    International Nuclear Information System (INIS)

    Maples, C.; Sivak, J.

    1979-05-01

    MINUS 3 is a general, multi-tasked data acquisition package operating on the ModComp IV/25 computers at both the 88''-Cyclotron and SuperHILAC. It currently can acquire data via three different channels: interrupt; serial DMA link; and remote slave units for histogram type data. Two additional acquisition paths, CAMAC (with programmable differential branch drivers) and MODACS (for multiple CPU linkages and control) are scheduled to be added in the near future. The package operates in a prioritized, time-available mode which permits it to dynamically adapt to microscopic data rate structures due to beam characteristics at different accelerators. Special hardware has been added to the graphics system to provide enhanced high-speed interactive capability. The program framework is also designed as a parasitic environment in which users may, in parallel, attach their own specialized and independent code

  4. The Spiral Discovery Network as an Automated General-Purpose Optimization Tool

    Directory of Open Access Journals (Sweden)

    Adam B. Csapo

    2018-01-01

    Full Text Available The Spiral Discovery Method (SDM was originally proposed as a cognitive artifact for dealing with black-box models that are dependent on multiple inputs with nonlinear and/or multiplicative interaction effects. Besides directly helping to identify functional patterns in such systems, SDM also simplifies their control through its characteristic spiral structure. In this paper, a neural network-based formulation of SDM is proposed together with a set of automatic update rules that makes it suitable for both semiautomated and automated forms of optimization. The behavior of the generalized SDM model, referred to as the Spiral Discovery Network (SDN, and its applicability to nondifferentiable nonconvex optimization problems are elucidated through simulation. Based on the simulation, the case is made that its applicability would be worth investigating in all areas where the default approach of gradient-based backpropagation is used today.

  5. Implementation of Finite Volume based Navier Stokes Algorithm Within General Purpose Flow Network Code

    Science.gov (United States)

    Schallhorn, Paul; Majumdar, Alok

    2012-01-01

    This paper describes a finite volume based numerical algorithm that allows multi-dimensional computation of fluid flow within a system level network flow analysis. There are several thermo-fluid engineering problems where higher fidelity solutions are needed that are not within the capacity of system level codes. The proposed algorithm will allow NASA's Generalized Fluid System Simulation Program (GFSSP) to perform multi-dimensional flow calculation within the framework of GFSSP s typical system level flow network consisting of fluid nodes and branches. The paper presents several classical two-dimensional fluid dynamics problems that have been solved by GFSSP's multi-dimensional flow solver. The numerical solutions are compared with the analytical and benchmark solution of Poiseulle, Couette and flow in a driven cavity.

  6. Signal processing and general purpose data acquisition system for on-line tomographic measurements

    Science.gov (United States)

    Murari, A.; Martin, P.; Hemming, O.; Manduchi, G.; Marrelli, L.; Taliercio, C.; Hoffmann, A.

    1997-01-01

    New analog signal conditioning electronics and data acquisition systems have been developed for the soft x-ray and bolometric tomography diagnostic in the reverse field pinch experiment (RFX). For the soft x-ray detectors the analog signal processing includes a fully differential current to voltage conversion, with up to a 200 kHz bandwidth. For the bolometers, a 50 kHz carrier frequency amplifier allows a maximum bandwidth of 10 kHz. In both cases the analog signals are digitized with a 1 MHz sampling rate close to the diagnostic and are transmitted via a transparent asynchronous xmitter/receiver interface (TAXI) link to purpose built Versa Module Europa (VME) modules which perform data acquisition. A software library has been developed for data preprocessing and tomographic reconstruction. It has been written in C language and is self-contained, i.e., no additional mathematical library is required. The package is therefore platform-free: in particular it can perform online analysis in a real-time application, such as continuous display and feedback, and is portable for long duration fusion or other physical experiments. Due to the modular organization of the library, new preprocessing and analysis modules can be easily integrated in the environment. This software is implemented in RFX over three different platforms: open VMS, digital Unix, and VME 68040 CPU.

  7. Interactive general-purpose function minimization for the analysis of neutron scattering data

    International Nuclear Information System (INIS)

    Abel, W.

    1981-12-01

    An on-line graphic display facility has been employed mainly for the peak analysis of time-of-flight spectra measured by inelastic scattering of thermal neutrons. But it is useful also for the analysis of spectra measured with triple axis spectrometers and of diffraction patterns. The spectral lines may be fitted by the following analytical shape functions: (i) a Gaussian, (ii) a Lorentzian, or (iii) a convolution of a Lorentzian with a Gaussian, plus a background continuum. Data reduction or correction may be invoked optionally. For more general applications in analysing of numerical data there is also the possibility to define the analytical shape functions by the user. Three different minimization methods are available which may be used alone or in combination. The parameters of the shape functions may be kept fixed or variable during the minimization steps. The width of variation may be restricted. Global correlation coefficients, parameter errors and the chi 2 are displayed to inform the user about the quality of the fit. A detailed description of the program operations is given. The programs are written in FORTRAN IV and use an IBM/2250-1 graphic display unit. (orig.) [de

  8. TOUGH2: A general-purpose numerical simulator for multiphase nonisothermal flows

    Energy Technology Data Exchange (ETDEWEB)

    Pruess, K. [Lawrence Berkeley Lab., CA (United States)

    1991-06-01

    Numerical simulators for multiphase fluid and heat flows in permeable media have been under development at Lawrence Berkeley Laboratory for more than 10 yr. Real geofluids contain noncondensible gases and dissolved solids in addition to water, and the desire to model such `compositional` systems led to the development of a flexible multicomponent, multiphase simulation architecture known as MULKOM. The design of MULKOM was based on the recognition that the mass-and energy-balance equations for multiphase fluid and heat flows in multicomponent systems have the same mathematical form, regardless of the number and nature of fluid components and phases present. Application of MULKOM to different fluid mixtures, such as water and air, or water, oil, and gas, is possible by means of appropriate `equation-of-state` (EOS) modules, which provide all thermophysical and transport parameters of the fluid mixture and the permeable medium as a function of a suitable set of primary thermodynamic variables. Investigations of thermal and hydrologic effects from emplacement of heat-generating nuclear wastes into partially water-saturated formations prompted the development and release of a specialized version of MULKOM for nonisothermal flow of water and air, named TOUGH. TOUGH is an acronym for `transport of unsaturated groundwater and heat` and is also an allusion to the tuff formations at Yucca Mountain, Nevada. The TOUGH2 code is intended to supersede TOUGH. It offers all the capabilities of TOUGH and includes a considerably more general subset of MULKOM modules with added capabilities. The paper briefly describes the simulation methodology and user features.

  9. Design and validation of a general purpose robotic testing system for musculoskeletal applications.

    Science.gov (United States)

    Noble, Lawrence D; Colbrunn, Robb W; Lee, Dong-Gil; van den Bogert, Antonie J; Davis, Brian L

    2010-02-01

    Orthopaedic research on in vitro forces applied to bones, tendons, and ligaments during joint loading has been difficult to perform because of limitations with existing robotic simulators in applying full-physiological loading to the joint under investigation in real time. The objectives of the current work are as follows: (1) describe the design of a musculoskeletal simulator developed to support in vitro testing of cadaveric joint systems, (2) provide component and system-level validation results, and (3) demonstrate the simulator's usefulness for specific applications of the foot-ankle complex and knee. The musculoskeletal simulator allows researchers to simulate a variety of loading conditions on cadaver joints via motorized actuators that simulate muscle forces while simultaneously contacting the joint with an external load applied by a specialized robot. Multiple foot and knee studies have been completed at the Cleveland Clinic to demonstrate the simulator's capabilities. Using a variety of general-use components, experiments can be designed to test other musculoskeletal joints as well (e.g., hip, shoulder, facet joints of the spine). The accuracy of the tendon actuators to generate a target force profile during simulated walking was found to be highly variable and dependent on stance position. Repeatability (the ability of the system to generate the same tendon forces when the same experimental conditions are repeated) results showed that repeat forces were within the measurement accuracy of the system. It was determined that synchronization system accuracy was 6.7+/-2.0 ms and was based on timing measurements from the robot and tendon actuators. The positioning error of the robot ranged from 10 microm to 359 microm, depending on measurement condition (e.g., loaded or unloaded, quasistatic or dynamic motion, centralized movements or extremes of travel, maximum value, or root-mean-square, and x-, y- or z-axis motion). Algorithms and methods for controlling

  10. Operation of a general purpose stepping motor-encoder positioning subsystem at the National Synchrotron Light Source

    International Nuclear Information System (INIS)

    Stubblefield, F.W.

    1985-11-01

    Four copies of a general purpose subsystem for mechanical positioning of detectors, samples, and beam line optical elements which constitute experiments at the National Synchrotron Light Source facility of Brookhaven National Laboratory have been constructed and placed into operation. Construction of a fifth subsystem unit is nearing completion. The subsystems affect mechanical positioning by controlling a set of stepping motor-encoder pairs. The units are general purpose in the sense that they receive commands over a 9600 baud asynchronous serial line compatible with the RS-232-C electrical signal standard, generate TTL-compatible streams of stepping pulses which can be used with a wide variety of stepping motors, and read back position values from a number of different types and models of position encoder. The basic structure of the motor controller subsystem is briefly reviewed. Additions to the subsystem made in response to problems indicated by actual operation of the four installed units are described in more detail

  11. Recent advances toward a general purpose linear-scaling quantum force field.

    Science.gov (United States)

    Giese, Timothy J; Huang, Ming; Chen, Haoyuan; York, Darrin M

    2014-09-16

    Conspectus There is need in the molecular simulation community to develop new quantum mechanical (QM) methods that can be routinely applied to the simulation of large molecular systems in complex, heterogeneous condensed phase environments. Although conventional methods, such as the hybrid quantum mechanical/molecular mechanical (QM/MM) method, are adequate for many problems, there remain other applications that demand a fully quantum mechanical approach. QM methods are generally required in applications that involve changes in electronic structure, such as when chemical bond formation or cleavage occurs, when molecules respond to one another through polarization or charge transfer, or when matter interacts with electromagnetic fields. A full QM treatment, rather than QM/MM, is necessary when these features present themselves over a wide spatial range that, in some cases, may span the entire system. Specific examples include the study of catalytic events that involve delocalized changes in chemical bonds, charge transfer, or extensive polarization of the macromolecular environment; drug discovery applications, where the wide range of nonstandard residues and protonation states are challenging to model with purely empirical MM force fields; and the interpretation of spectroscopic observables. Unfortunately, the enormous computational cost of conventional QM methods limit their practical application to small systems. Linear-scaling electronic structure methods (LSQMs) make possible the calculation of large systems but are still too computationally intensive to be applied with the degree of configurational sampling often required to make meaningful comparison with experiment. In this work, we present advances in the development of a quantum mechanical force field (QMFF) suitable for application to biological macromolecules and condensed phase simulations. QMFFs leverage the benefits provided by the LSQM and QM/MM approaches to produce a fully QM method that is able to

  12. TU-FG-209-05: Demonstration of the Line Focus Principle Using the Generalized Measured-Relative Object Detectability (GM-ROD) Metric

    Energy Technology Data Exchange (ETDEWEB)

    Russ, M; Shankar, A; Lau, A; Bednarek, D; Rudin, S [University at Buffalo (SUNY), Buffalo, NY (United States)

    2016-06-15

    Purpose: Demonstrate and quantify the augmented resolution due to focalspot size decrease in images acquired on the anode side of the field, for both small and medium (0.3 and 0.6mm) focal-spot sizes using the experimental task-based GM-ROD metric. Theoretical calculations have shown that a medium focal-spot can achieve the resolution of a small focal-spot if acquired with a tilted anode, effectively providing a higher-output small focal-spot. Methods: The MAF-CMOS (micro-angiographic fluoroscopic complementary-metal-oxide semiconductor) detector (75µm pixel pitch) imaged two copper wire segments of different diameter and a pipeline stent at the central axis and on the anode side of the beam, achieved by tilting the x-ray C-arm (Toshiba Infinix) to 6° and realigning the detector with the perpendicular ray to correct for x-ray obliquity. The relative gain in resolution was determined using the GM-ROD metric, which compares images on the basis of the Fourier transform of the image and the measured NNPS. To emphasize the geometric unsharpness, images were acquired at a magnification of two. Results: Images acquired on the anode side were compared to those acquired on the central axis with the same target-area focal-spot to consider the effect of an angled tube, and for all three objects the advantage of the smaller effective focal-spot was clear, showing a maximum improvement of 36% in GM-ROD. The images obtained with the small focal-spot at the central axis were compared to those of the medium focal-spot at the anode side and, for all objects, the relative performance was comparable. Conclusion: For three objects, the GM-ROD demonstrated the advantage of the anode side focal-spot. The comparable performance of the medium focal-spot on the anode side will allow for a high-output small focal-spot; a necessity in endovascular image-guided interventions. Partial support from an NIH grant R01EB002873 and an equipment grant from Toshiba Medical Systems Corp.

  13. TU-FG-209-05: Demonstration of the Line Focus Principle Using the Generalized Measured-Relative Object Detectability (GM-ROD) Metric

    International Nuclear Information System (INIS)

    Russ, M; Shankar, A; Lau, A; Bednarek, D; Rudin, S

    2016-01-01

    Purpose: Demonstrate and quantify the augmented resolution due to focalspot size decrease in images acquired on the anode side of the field, for both small and medium (0.3 and 0.6mm) focal-spot sizes using the experimental task-based GM-ROD metric. Theoretical calculations have shown that a medium focal-spot can achieve the resolution of a small focal-spot if acquired with a tilted anode, effectively providing a higher-output small focal-spot. Methods: The MAF-CMOS (micro-angiographic fluoroscopic complementary-metal-oxide semiconductor) detector (75µm pixel pitch) imaged two copper wire segments of different diameter and a pipeline stent at the central axis and on the anode side of the beam, achieved by tilting the x-ray C-arm (Toshiba Infinix) to 6° and realigning the detector with the perpendicular ray to correct for x-ray obliquity. The relative gain in resolution was determined using the GM-ROD metric, which compares images on the basis of the Fourier transform of the image and the measured NNPS. To emphasize the geometric unsharpness, images were acquired at a magnification of two. Results: Images acquired on the anode side were compared to those acquired on the central axis with the same target-area focal-spot to consider the effect of an angled tube, and for all three objects the advantage of the smaller effective focal-spot was clear, showing a maximum improvement of 36% in GM-ROD. The images obtained with the small focal-spot at the central axis were compared to those of the medium focal-spot at the anode side and, for all objects, the relative performance was comparable. Conclusion: For three objects, the GM-ROD demonstrated the advantage of the anode side focal-spot. The comparable performance of the medium focal-spot on the anode side will allow for a high-output small focal-spot; a necessity in endovascular image-guided interventions. Partial support from an NIH grant R01EB002873 and an equipment grant from Toshiba Medical Systems Corp.

  14. Crowdsourcing metrics of digital collections

    Directory of Open Access Journals (Sweden)

    Tuula Pääkkönen

    2015-12-01

    Full Text Available In the National Library of Finland (NLF there are millions of digitized newspaper and journal pages, which are openly available via the public website  http://digi.kansalliskirjasto.fi. To serve users better, last year the front end was completely overhauled with its main aim in crowdsourcing features, e.g., by giving end-users the opportunity to create digital clippings and a personal scrapbook from the digital collections. But how can you know whether crowdsourcing has had an impact? How much crowdsourcing functionalities have been used so far? Did crowdsourcing work? In this paper the statistics and metrics of a recent crowdsourcing effort are analysed across the different digitized material types (newspapers, journals, ephemera. The subjects, categories and keywords given by the users are analysed to see which topics are the most appealing. Some notable public uses of the crowdsourced article clippings are highlighted. These metrics give us indications on how the end-users, based on their own interests, are investigating and using the digital collections. Therefore, the suggested metrics illustrate the versatility of the information needs of the users, varying from citizen science to research purposes. By analysing the user patterns, we can respond to the new needs of the users by making minor changes to accommodate the most active participants, while still making the service more approachable for those who are trying out the functionalities for the first time. Participation in the clippings and annotations can enrich the materials in unexpected ways and can possibly pave the way for opportunities of using crowdsourcing more also in research contexts. This creates more opportunities for the goals of open science since source data becomes ­available, making it possible for researchers to reach out to the general public for help. In the long term, utilizing, for example, text mining methods can allow these different end-user segments to

  15. Common fixed point theorems for finite number of mappings without continuity and compatibility on intuitionistic fuzzy metric spaces

    International Nuclear Information System (INIS)

    Sharma, Sushil; Deshpande, Bhavana

    2009-01-01

    The purpose of this paper is to prove some common fixed point theorems for finite number of discontinuous, noncompatible mappings on noncomplete intuitionistic fuzzy metric spaces. Our results extend, generalize and intuitionistic fuzzify several known results in fuzzy metric spaces. We give an example and also give formulas for total number of commutativity conditions for finite number of mappings.

  16. A general-purpose framework to simulate musculoskeletal system of human body: using a motion tracking approach.

    Science.gov (United States)

    Ehsani, Hossein; Rostami, Mostafa; Gudarzi, Mohammad

    2016-02-01

    Computation of muscle force patterns that produce specified movements of muscle-actuated dynamic models is an important and challenging problem. This problem is an undetermined one, and then a proper optimization is required to calculate muscle forces. The purpose of this paper is to develop a general model for calculating all muscle activation and force patterns in an arbitrary human body movement. For this aim, the equations of a multibody system forward dynamics, which is considered for skeletal system of the human body model, is derived using Lagrange-Euler formulation. Next, muscle contraction dynamics is added to this model and forward dynamics of an arbitrary musculoskeletal system is obtained. For optimization purpose, the obtained model is used in computed muscle control algorithm, and a closed-loop system for tracking desired motions is derived. Finally, a popular sport exercise, biceps curl, is simulated by using this algorithm and the validity of the obtained results is evaluated via EMG signals.

  17. Assessment of general public perceptions toward traditional medicines used for aphrodisiac purpose in state of Penang, Malaysia.

    Science.gov (United States)

    Hassali, Mohamed Azmi; Saleem, Fahad; Shafie, Asrul Akmal; Al-Qazaz, Harith Khalid; Farooqui, Maryam; Aljadhey, Hisham; Atif, Muhammad; Masood, Imran

    2012-11-01

    The study aims to evaluate general public perceptions regarding the use of Traditional and Complementary Medicines (TCM) for aphrodisiac purposes. A questionnaire based, cross-sectional study was undertaken. Respondents were selected in the state of Penang, Malaysia. A total of 392 respondents were included in the study. Descriptive statistics were used for data analysis. Chi Square/Fischer Exact tests were used where appropriate. Out of 392 respondents, 150 (38.26%) reported using specific Traditional medicines for aphrodisiac purposes. Most respondents (46.94%) agreed that aphrodisiac medicines were easily available t. Moreover, 40.31% of the respondents reported that traditional aphrodisiac medicines were cheaper than modern (prescription) medicines. This study highlights limited public knowledge regarding the use of traditional aphrodisiac medicine. Healthcare professionals should be aware of informal TCM usage when prescribing allopathic medicines. Copyright © 2012 Elsevier Ltd. All rights reserved.

  18. SU-D-204-05: Quantitative Comparison of a High Resolution Micro-Angiographic Fluoroscopic (MAF) Detector with a Standard Flat Panel Detector (FPD) Using the New Metric of Generalized Measured Relative Object Detectability (GM-ROD)

    Energy Technology Data Exchange (ETDEWEB)

    Russ, M; Ionita, C; Bednarek, D; Rudin, S [Toshiba Stroke and Vascular Research Center, University at Buffalo (SUNY), Buffalo, NY (United States)

    2015-06-15

    Purpose: In endovascular image-guided neuro-interventions, visualization of fine detail is paramount. For example, the ability of the interventionist to visualize the stent struts depends heavily on the x-ray imaging detector performance. Methods: A study to examine the relative performance of the high resolution MAF-CMOS (pixel size 75µm, Nyquist frequency 6.6 cycles/mm) and a standard Flat Panel Detector (pixel size 194µm, Nyquist frequency 2.5 cycles/mm) detectors in imaging a neuro stent was done using the Generalized Measured Relative Object Detectability (GM-ROD) metric. Low quantum noise images of a deployed stent were obtained by averaging 95 frames obtained by both detectors without changing other exposure or geometric parameters. The square of the Fourier transform of each image is taken and divided by the generalized normalized noise power spectrum to give an effective measured task-specific signal-to-noise ratio. This expression is then integrated from 0 to each of the detector’s Nyquist frequencies, and the GM-ROD value is determined by taking a ratio of the integrals for the MAF-CMOS to that of the FPD. The lower bound of integration can be varied to emphasize high frequencies in the detector comparisons. Results: The MAF-CMOS detector exhibits vastly superior performance over the FPD when integrating over all frequencies, yielding a GM-ROD value of 63.1. The lower bound of integration was stepped up in increments of 0.5 cycles/mm for higher frequency comparisons. As the lower bound increased, the GM-ROD value was augmented, reflecting the superior performance of the MAF-CMOS in the high frequency regime. Conclusion: GM-ROD is a versatile metric that can provide quantitative detector and task dependent comparisons that can be used as a basis for detector selection. Supported by NIH Grant: 2R01EB002873 and an equipment grant from Toshiba Medical Systems Corporation.

  19. Effects of detector-source distance and detector bias voltage variations on time resolution of general purpose plastic scintillation detectors.

    Science.gov (United States)

    Ermis, E E; Celiktas, C

    2012-12-01

    Effects of source-detector distance and the detector bias voltage variations on time resolution of a general purpose plastic scintillation detector such as BC400 were investigated. (133)Ba and (207)Bi calibration sources with and without collimator were used in the present work. Optimum source-detector distance and bias voltage values were determined for the best time resolution by using leading edge timing method. Effect of the collimator usage on time resolution was also investigated. Copyright © 2012 Elsevier Ltd. All rights reserved.

  20. Application of a general-purpose scintigraphic scanner to transverse-section (tomographic) gamma-ray imaging

    International Nuclear Information System (INIS)

    Bradstock, P.A.; Milward, R.C.

    1976-01-01

    The paper describes the recent application of a general-purpose commercial scintigraphic scanner to transverse-section radioisotope tomography. The principle of the method is to obtain the distribution of radioactive material in a thin transverse slice of the body or brain, from a mathematical reconstruction using the measured transverse projections of the activity within that slice. The usefulness of the radioisotope section-scanning technique for clinical diagnosis, as evidenced from one year's use of the machine at the Midland Centre for Neurology and Neurosurgery, Birmingham, U.K., is briefly discussed. (orig.) [de

  1. General-purpose heat source project and space nuclear safety and fuels program. Progress reportt, January 1980

    International Nuclear Information System (INIS)

    Maraman, W.J.

    1980-04-01

    This formal monthly report covers the studies related to the use of 238 PuO 2 in radioisotopic power systems carried out for the Advanced Nuclear Systems and Projects Division of the Los Alamos Scientific Laboratory. The two programs involved are the general-purpose heat source development and space nuclear safety and fuels. Most of the studies discussed here are of a continuing nature. Results and conclusions described may change as the work continues. Published reference to the results cited in this report should not be made without the explicit permission of the person in charge of the work

  2. A parallelization study of the general purpose Monte Carlo code MCNP4 on a distributed memory highly parallel computer

    International Nuclear Information System (INIS)

    Yamazaki, Takao; Fujisaki, Masahide; Okuda, Motoi; Takano, Makoto; Masukawa, Fumihiro; Naito, Yoshitaka

    1993-01-01

    The general purpose Monte Carlo code MCNP4 has been implemented on the Fujitsu AP1000 distributed memory highly parallel computer. Parallelization techniques developed and studied are reported. A shielding analysis function of the MCNP4 code is parallelized in this study. A technique to map a history to each processor dynamically and to map control process to a certain processor was applied. The efficiency of parallelized code is up to 80% for a typical practical problem with 512 processors. These results demonstrate the advantages of a highly parallel computer to the conventional computers in the field of shielding analysis by Monte Carlo method. (orig.)

  3. Application of a general purpose user's version of the EGS4 code system to a photon skyshine benchmarking calculation

    International Nuclear Information System (INIS)

    Nojiri, I.; Fukasaku, Y.; Narita, O.

    1994-01-01

    A general purpose user's version of the EGS4 code system has been developed to make EGS4 easily applicable to the safety analysis of nuclear fuel cycle facilities. One such application involves the determination of skyshine dose for a variety of photon sources. To verify the accuracy of the code, it was benchmarked with Kansas State University (KSU) photon skyshine experiment of 1977. The results of the simulation showed that this version of EGS4 would be appicable to the skyshine calculation. (author)

  4. Multi­-Threaded Algorithms for General purpose Graphics Processor Units in the ATLAS High Level Trigger

    CERN Document Server

    Conde Mui\\~no, Patricia; The ATLAS collaboration

    2016-01-01

    General purpose Graphics Processor Units (GPGPU) are being evaluated for possible future inclusion in an upgraded ATLAS High Level Trigger farm. We have developed a demonstrator including GPGPU implementations of Inner Detector and Muon tracking and Calorimeter clustering within the ATLAS software framework. ATLAS is a general purpose particle physics experiment located on the LHC collider at CERN. The ATLAS Trigger system consists of two levels, with level 1 implemented in hardware and the High Level Trigger implemented in software running on a farm of commodity CPU. The High Level Trigger reduces the trigger rate from the 100 kHz level 1 acceptance rate to 1 kHz for recording, requiring an average per­-event processing time of ~250 ms for this task. The selection in the high level trigger is based on reconstructing tracks in the Inner Detector and Muon Spectrometer and clusters of energy deposited in the Calorimeter. Performing this reconstruction within the available farm resources presents a significant ...

  5. Languages for Specific Academic Purposes or Languages for General Academic Purposes? A Critical Reappraisal of a Key Issue for Language Provision in Higher Education

    Science.gov (United States)

    Krekeler, Christian

    2013-01-01

    The debate about the subject specificity of university language tuition has been going on for decades; it has mostly been discussed in the context of English for Academic Purposes. This paper considers the case for disciplinary specificity with regard to languages other than English. Few, if any, developed curricula, syllabuses, suitable textbooks…

  6. Screening tests in toxicity or drug effect studies with use of centrifichem general-purpose spectrophotometeric analyzer

    International Nuclear Information System (INIS)

    Nagy, B.; Bercz, J.P.

    1986-01-01

    CentrifiChem System 400 general-purpose spectrophotometric analyzer which can process simultaneously 30 samples and reads the reactions within milliseconds was used for toxicity studies. Organic and inorganic chemicals were screened for inhibitory action of the hydrolytic activity of sarcoplasmic reticulum (SR) Ca,Mg-ATPase and that of the sacrolemmal (SL) Na,K-ATPase, or mitochondrial ATPase (M). SR and SL were prepared from rabbit muscles, Na,K-ATPase from pig kidneys, M from pig hearts. Pseudosubstrates of paranitrophenyl phosphate and 2,4-dinitrophenyl phosphate, both proven high energy phosphate substitutes for ATPase coupled ion transfer were used. The reaction rates were followed spectrophotometrically at 405 nm measuring the accumulation of yellow nitrophenolate ions. The reported calcium transfer coupling ratio to hydrolysis of 2:1 was ascertained with use of 45 Ca in case of SR. Inhibition constants (pI) on SR, SL, and M for the pseudosubstrate hydrolysis will be given for over 20 chemicals tested. The applicability of the system to general toxicity testing and to general cardio-effective drug screening will be presented

  7. General-purpose heat source: Research and development program, radioisotope thermoelectric generator/thin fragment impact test

    International Nuclear Information System (INIS)

    Reimus, M.A.H.; Hinckley, J.E.

    1996-11-01

    The general-purpose heat source provides power for space missions by transmitting the heat of 238 Pu decay to an array of thermoelectric elements in a radioisotope thermoelectric generator (RTG). Because the potential for a launch abort or return from orbit exists for any space mission, the heat source response to credible accident scenarios is being evaluated. This test was designed to provide information on the response of a loaded RTG to impact by a fragment similar to the type of fragment produced by breakup of the spacecraft propulsion module system. The results of this test indicated that impact by a thin aluminum fragment traveling at 306 m/s may result in significant damage to the converter housing, failure of one fueled clad, and release of a small quantity of fuel

  8. RUMD: A general purpose molecular dynamics package optimized to utilize GPU hardware down to a few thousand particles

    Directory of Open Access Journals (Sweden)

    Nicholas P. Bailey, Trond S. Ingebrigtsen, Jesper Schmidt Hansen, Arno A. Veldhorst, Lasse Bøhling, Claire A. Lemarchand, Andreas E. Olsen, Andreas K. Bacher, Lorenzo Costigliola, Ulf R. Pedersen, Heine Larsen, Jeppe C. Dyre, Thomas B. Schrøder

    2017-12-01

    Full Text Available RUMD is a general purpose, high-performance molecular dynamics (MD simulation package running on graphical processing units (GPU's. RUMD addresses the challenge of utilizing the many-core nature of modern GPU hardware when simulating small to medium system sizes (roughly from a few thousand up to hundred thousand particles. It has a performance that is comparable to other GPU-MD codes at large system sizes and substantially better at smaller sizes.RUMD is open-source and consists of a library written in C++ and the CUDA extension to C, an easy-to-use Python interface, and a set of tools for set-up and post-simulation data analysis. The paper describes RUMD's main features, optimizations and performance benchmarks.

  9. VoxelMages: a general-purpose graphical interface for designing geometries and processing DICOM images for PENELOPE.

    Science.gov (United States)

    Giménez-Alventosa, V; Ballester, F; Vijande, J

    2016-12-01

    The design and construction of geometries for Monte Carlo calculations is an error-prone, time-consuming, and complex step in simulations describing particle interactions and transport in the field of medical physics. The software VoxelMages has been developed to help the user in this task. It allows to design complex geometries and to process DICOM image files for simulations with the general-purpose Monte Carlo code PENELOPE in an easy and straightforward way. VoxelMages also allows to import DICOM-RT structure contour information as delivered by a treatment planning system. Its main characteristics, usage and performance benchmarking are described in detail. Copyright © 2016 Elsevier Ltd. All rights reserved.

  10. Effects of detector–source distance and detector bias voltage variations on time resolution of general purpose plastic scintillation detectors

    International Nuclear Information System (INIS)

    Ermis, E.E.; Celiktas, C.

    2012-01-01

    Effects of source-detector distance and the detector bias voltage variations on time resolution of a general purpose plastic scintillation detector such as BC400 were investigated. 133 Ba and 207 Bi calibration sources with and without collimator were used in the present work. Optimum source-detector distance and bias voltage values were determined for the best time resolution by using leading edge timing method. Effect of the collimator usage on time resolution was also investigated. - Highlights: ► Effect of the source-detector distance on time spectra was investigated. ► Effect of the detector bias voltage variations on time spectra was examined. ► Optimum detector–source distance was determined for the best time resolution. ► Optimum detector bias voltage was determined for the best time resolution. ► 133 Ba and 207 Bi radioisotopes were used.

  11. Human factors in equipment development for the Space Shuttle - A study of the general purpose work station

    Science.gov (United States)

    Junge, M. K.; Giacomi, M. J.

    1981-01-01

    The results of a human factors test to assay the suitability of a prototype general purpose work station (GPWS) for biosciences experiments on the fourth Spacelab mission are reported. The evaluation was performed to verify that users of the GPWS would optimally interact with the GPWS configuration and instrumentation. Six male subjects sat on stools positioned to allow assimilation of the zero-g body posture. Trials were run concerning the operator viewing angles facing the console, the console color, procedures for injecting rates with dye, a rat blood cell count, mouse dissection, squirrel monkey transfer, and plant fixation. The trials were run for several days in order to gage improvement or poor performance conditions. Better access to the work surface was found necessary, together with more distinct and better located LEDs, better access window latches, clearer sequences on control buttons, color-coded sequential buttons, and provisions made for an intercom system when operators of the GPWS work in tandem.

  12. Evaluation of Aqueous and Powder Processing Techniques for Production of Pu-238-Fueled General Purpose Heat Sources

    Energy Technology Data Exchange (ETDEWEB)

    2008-06-01

    This report evaluates alternative processes that could be used to produce Pu-238 fueled General Purpose Heat Sources (GPHS) for radioisotope thermoelectric generators (RTG). Fabricating GPHSs with the current process has remained essentially unchanged since its development in the 1970s. Meanwhile, 30 years of technological advancements have been made in the fields of chemistry, manufacturing, ceramics, and control systems. At the Department of Energy’s request, alternate manufacturing methods were compared to current methods to determine if alternative fabrication processes could reduce the hazards, especially the production of respirable fines, while producing an equivalent GPHS product. An expert committee performed the evaluation with input from four national laboratories experienced in Pu-238 handling.

  13. Duplication of complete dentures using general-purpose handheld optical scanner and 3-dimensional printer: Introduction and clinical considerations.

    Science.gov (United States)

    Kurahashi, Kosuke; Matsuda, Takashi; Goto, Takaharu; Ishida, Yuichi; Ito, Teruaki; Ichikawa, Tetsuo

    2017-01-01

    To introduce a new clinical procedure for fabricating duplicates of complete dentures by bite pressure impression using digital technology, and to discuss its clinical significance. The denture is placed on a rotary table and the 3-dimensional form of the denture is digitized using a general-purpose handheld optical scanner. The duplicate denture is made of polylactic acid by a 3-dimensional printer using the 3-dimensional data. This procedure has the advantages of wasting less material, employing less human power, decreasing treatment time at the chair side, lowering the rates of contamination, and being readily fabricated at the time of the treatment visit. Copyright © 2016 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

  14. A Metric for Heterotic Moduli

    Science.gov (United States)

    Candelas, Philip; de la Ossa, Xenia; McOrist, Jock

    2017-12-01

    Heterotic vacua of string theory are realised, at large radius, by a compact threefold with vanishing first Chern class together with a choice of stable holomorphic vector bundle. These form a wide class of potentially realistic four-dimensional vacua of string theory. Despite all their phenomenological promise, there is little understanding of the metric on the moduli space of these. What is sought is the analogue of special geometry for these vacua. The metric on the moduli space is important in phenomenology as it normalises D-terms and Yukawa couplings. It is also of interest in mathematics, since it generalises the metric, first found by Kobayashi, on the space of gauge field connections, to a more general context. Here we construct this metric, correct to first order in {α^{\\backprime}}, in two ways: first by postulating a metric that is invariant under background gauge transformations of the gauge field, and also by dimensionally reducing heterotic supergravity. These methods agree and the resulting metric is Kähler, as is required by supersymmetry. Checking the metric is Kähler is intricate and the anomaly cancellation equation for the H field plays an essential role. The Kähler potential nevertheless takes a remarkably simple form: it is the Kähler potential of special geometry with the Kähler form replaced by the {α^{\\backprime}}-corrected hermitian form.

  15. Active Metric Learning for Supervised Classification

    OpenAIRE

    Kumaran, Krishnan; Papageorgiou, Dimitri; Chang, Yutong; Li, Minhan; Takáč, Martin

    2018-01-01

    Clustering and classification critically rely on distance metrics that provide meaningful comparisons between data points. We present mixed-integer optimization approaches to find optimal distance metrics that generalize the Mahalanobis metric extensively studied in the literature. Additionally, we generalize and improve upon leading methods by removing reliance on pre-designated "target neighbors," "triplets," and "similarity pairs." Another salient feature of our method is its ability to en...

  16. On characterizations of quasi-metric completeness

    Energy Technology Data Exchange (ETDEWEB)

    Dag, H.; Romaguera, S.; Tirado, P.

    2017-07-01

    Hu proved in [4] that a metric space (X, d) is complete if and only if for any closed subspace C of (X, d), every Banach contraction on C has fixed point. Since then several authors have investigated the problem of characterizing the metric completeness by means of fixed point theorems. Recently this problem has been studied in the more general context of quasi-metric spaces for different notions of completeness. Here we present a characterization of a kind of completeness for quasi-metric spaces by means of a quasi-metric versions of Hu’s theorem. (Author)

  17. Heuristic simulation of nuclear systems on a supercomputer using the HAL-1987 general-purpose production-rule analysis system

    International Nuclear Information System (INIS)

    Ragheb, M.; Gvillo, D.; Makowitz, H.

    1987-01-01

    HAL-1987 is a general-purpose tool for the construction of production-rule analysis systems. It uses the rule-based paradigm from the part of artificial intelligence concerned with knowledge engineering. It uses backward-chaining and forward-chaining in an antecedent-consequent logic, and is programmed in Portable Standard Lisp (PSL). The inference engine is flexible and accommodates general additions and modifications to the knowledge base. The system is used in coupled symbolic-procedural programming adaptive methodologies for stochastic simulations. In Monte Carlo simulations of particle transport, the system considers the pre-processing of the input data to the simulation and adaptively controls the variance reduction process as the simulation progresses. This is accomplished through the use of a knowledge base of rules which encompass the user's expertise in the variance reduction process. It is also applied to the construction of model-based systems for monitoring, fault-diagnosis and crisis-alert in engineering devices, particularly in the field of nuclear reactor safety analysis

  18. [Clinical trial data management and quality metrics system].

    Science.gov (United States)

    Chen, Zhao-hua; Huang, Qin; Deng, Ya-zhong; Zhang, Yue; Xu, Yu; Yu, Hao; Liu, Zong-fan

    2015-11-01

    Data quality management system is essential to ensure accurate, complete, consistent, and reliable data collection in clinical research. This paper is devoted to various choices of data quality metrics. They are categorized by study status, e.g. study start up, conduct, and close-out. In each category, metrics for different purposes are listed according to ALCOA+ principles such us completeness, accuracy, timeliness, traceability, etc. Some general quality metrics frequently used are also introduced. This paper contains detail information as much as possible to each metric by providing definition, purpose, evaluation, referenced benchmark, and recommended targets in favor of real practice. It is important that sponsors and data management service providers establish a robust integrated clinical trial data quality management system to ensure sustainable high quality of clinical trial deliverables. It will also support enterprise level of data evaluation and bench marking the quality of data across projects, sponsors, data management service providers by using objective metrics from the real clinical trials. We hope this will be a significant input to accelerate the improvement of clinical trial data quality in the industry.

  19. g-Weak Contraction in Ordered Cone Rectangular Metric Spaces

    Directory of Open Access Journals (Sweden)

    S. K. Malhotra

    2013-01-01

    Full Text Available We prove some common fixed-point theorems for the ordered g-weak contractions in cone rectangular metric spaces without assuming the normality of cone. Our results generalize some recent results from cone metric and cone rectangular metric spaces into ordered cone rectangular metric spaces. Examples are provided which illustrate the results.

  20. In vivo dosimetry in intraoperative electron radiotherapy: microMOSFETs, radiochromic films and a general-purpose linac.

    Science.gov (United States)

    López-Tarjuelo, Juan; Bouché-Babiloni, Ana; Morillo-Macías, Virginia; de Marco-Blancas, Noelia; Santos-Serra, Agustín; Quirós-Higueras, Juan David; Ferrer-Albiach, Carlos

    2014-10-01

    In vivo dosimetry is desirable for the verification, recording, and eventual correction of treatment in intraoperative electron radiotherapy (IOERT). Our aim is to share our experience of metal oxide semiconductor field-effect transistors (MOSFETs) and radiochromic films with patients undergoing IOERT using a general-purpose linac. We used MOSFETs inserted into sterile bronchus catheters and radiochromic films that were cut, digitized, and sterilized by means of gas plasma. In all, 59 measurements were taken from 27 patients involving 15 primary tumors (seven breast and eight non-breast tumors) and 12 relapses. Data were subjected to an outliers' analysis and classified according to their compatibility with the relevant doses. Associations were sought regarding the type of detector, breast and non-breast irradiation, and the radiation oncologist's assessment of the difficulty of detector placement. At the same time, 19 measurements were carried out at the tumor bed with both detectors. MOSFET measurements ([Formula: see text]  = 93.5 %, sD  =  6.5 %) were not significantly shifted from film measurements ([Formula: see text]  =  96.0 %, sD  =  5.5 %; p  =  0.109), and no associations were found (p = 0.526, p = 0.295,  and p = 0.501, respectively). As regards measurements performed at the tumor bed with both detectors, MOSFET measurements ([Formula: see text]  =  95.0 %, sD  =  5.4 % were not significantly shifted from film measurements ([Formula: see text]  =  96.4 %, sD  =  5.0 %; p  =  0.363). In vivo dosimetry can produce satisfactory results at every studied location with a general-purpose linac. Detector choice should depend on user factors, not on the detector performance itself. Surgical team collaboration is crucial to success.

  1. SafeNet: a methodology for integrating general-purpose unsafe devices in safe-robot rehabilitation systems.

    Science.gov (United States)

    Vicentini, Federico; Pedrocchi, Nicola; Malosio, Matteo; Molinari Tosatti, Lorenzo

    2014-09-01

    Robot-assisted neurorehabilitation often involves networked systems of sensors ("sensory rooms") and powerful devices in physical interaction with weak users. Safety is unquestionably a primary concern. Some lightweight robot platforms and devices designed on purpose include safety properties using redundant sensors or intrinsic safety design (e.g. compliance and backdrivability, limited exchange of energy). Nonetheless, the entire "sensory room" shall be required to be fail-safe and safely monitored as a system at large. Yet, sensor capabilities and control algorithms used in functional therapies require, in general, frequent updates or re-configurations, making a safety-grade release of such devices hardly sustainable in cost-effectiveness and development time. As such, promising integrated platforms for human-in-the-loop therapies could not find clinical application and manufacturing support because of lacking in the maintenance of global fail-safe properties. Under the general context of cross-machinery safety standards, the paper presents a methodology called SafeNet for helping in extending the safety rate of Human Robot Interaction (HRI) systems using unsafe components, including sensors and controllers. SafeNet considers, in fact, the robotic system as a device at large and applies the principles of functional safety (as in ISO 13489-1) through a set of architectural procedures and implementation rules. The enabled capability of monitoring a network of unsafe devices through redundant computational nodes, allows the usage of any custom sensors and algorithms, usually planned and assembled at therapy planning-time rather than at platform design-time. A case study is presented with an actual implementation of the proposed methodology. A specific architectural solution is applied to an example of robot-assisted upper-limb rehabilitation with online motion tracking. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  2. Deposition, characterization, and in vivo performance of parylene coating on general-purpose silicone for examining potential biocompatible surface modifications

    International Nuclear Information System (INIS)

    Chou, Chia-Man; Shiao, Chiao-Ju; Chung, Chi-Jen; He, Ju-Liang

    2013-01-01

    In this study, a thorough investigation of parylene coatings was conducted, as follows: microstructure (i.e., X-ray diffractometer (XRD) and cold field emission scanning electron microscope (FESEM)), mechanical property (i.e., pencil hardness and cross-cut adhesion test), surface property (i.e., water contact angle measurement, IR, and X-ray photoelectron spectroscopy (XPS)), and biocompatibility tests (i.e., fibroblast cell culture, platelet adhesion, and animal studies). The results revealed that parylene, a crystalline and brittle coating, exhibited satisfactory film adhesion and relative hydrophobicity, thereby contributing to its effective barrier properties. Fibroblast cell culturing on the parylene-deposited specimen demonstrated improved cell proliferation and equivalent to or superior blood compatibility than that of the medical-grade silicone (currently used clinically). In the animal study, parylene coatings exhibited similar subcutaneous inflammatory reactions compared with the medical-grade silicone. Both in vitro and in vivo tests demonstrated the satisfactory biocompatibility of parylene coatings. - Highlights: • A complete investigation to identify the characteristics of parylene coatings on general-purpose silicones. • Microstructures, surface properties and mechanical properties of parylene coatings were examined. • In vitro (Cell culture, platelet adhesion) tests and animal studies revealed satisfactory biocompatibility. • An alternative of medical-grade silicones is expected to be obtained

  3. General-purpose computer networks and resource sharing in ERDA. Volume 3. Remote resource-sharing experience and findings

    Energy Technology Data Exchange (ETDEWEB)

    1977-07-15

    The investigation focused on heterogeneous networks in which a variety of dissimilar computers and operating systems were interconnected nationwide. Homogeneous networks, such as MFE net and SACNET, were not considered since they could not be used for general purpose resource sharing. Issues of privacy and security are of concern in any network activity. However, consideration of privacy and security of sensitive data arise to a much lesser degree in unclassified scientific research than in areas involving personal or proprietary information. Therefore, the existing mechanisms at individual sites for protecting sensitive data were relied on, and no new protection mechanisms to prevent infringement of privacy and security were attempted. Further development of ERDA networking will need to incorporate additional mechanisms to prevent infringement of privacy. The investigation itself furnishes an excellent example of computational resource sharing through a heterogeneous network. More than twenty persons, representing seven ERDA computing sites, made extensive use of both ERDA and non-ERDA computers in coordinating, compiling, and formatting the data which constitute the bulk of this report. Volume 3 analyzes the benefits and barriers encountered in actual resource sharing experience, and provides case histories of typical applications.

  4. Architecture of a general purpose embedded Slow-Control Adapter ASIC for future high-energy physics experiments

    Science.gov (United States)

    Gabrielli, Alessandro; Loddo, Flavio; Ranieri, Antonio; De Robertis, Giuseppe

    2008-10-01

    This work is aimed at defining the architecture of a new digital ASIC, namely Slow-Control Adapter (SCA), which will be designed in a commercial 130-nm CMOS technology. This chip will be embedded within a high-speed data acquisition optical link (GBT) to control and monitor the front-end electronics in future high-energy physics experiments. The GBT link provides a transparent transport layer between the SCA and control electronics in the counting room. The proposed SCA supports a variety of common bus protocols to interface with end-user general-purpose electronics. Between the GBT and the SCA a standard 100 Mb/s IEEE-802.3 compatible protocol will be implemented. This standard protocol allows off-line tests of the prototypes using commercial components that support the same standard. The project is justified because embedded applications in modern large HEP experiments require particular care to assure the lowest possible power consumption, still offering the highest reliability demanded by very large particle detectors.

  5. Deposition, characterization, and in vivo performance of parylene coating on general-purpose silicone for examining potential biocompatible surface modifications

    Energy Technology Data Exchange (ETDEWEB)

    Chou, Chia-Man [Division of Pediatric Surgery, Department of Surgery, Taichung Veterans General Hospital, 160, Sec. 3, Taichung Port Rd., Taichung 40705, Taiwan, ROC (China); Department of Medicine, National Yang-Ming University, 155, Sec. 2, Linong Street, Taipei 11221, Taiwan, ROC (China); Shiao, Chiao-Ju [Department of Materials Science and Engineering, Feng Chia University, 100, Wen-Hwa Rd., Taichung 40724, Taiwan, ROC (China); Chung, Chi-Jen, E-mail: cjchung@seed.net.tw [Department of Dental Technology and Materials Science, Central Taiwan University of Science and Technology, 666 Buzih Rd., Beitun District, Taichung 40601, Taiwan, ROC (China); He, Ju-Liang [Department of Materials Science and Engineering, Feng Chia University, 100, Wen-Hwa Rd., Taichung 40724, Taiwan, ROC (China)

    2013-12-31

    In this study, a thorough investigation of parylene coatings was conducted, as follows: microstructure (i.e., X-ray diffractometer (XRD) and cold field emission scanning electron microscope (FESEM)), mechanical property (i.e., pencil hardness and cross-cut adhesion test), surface property (i.e., water contact angle measurement, IR, and X-ray photoelectron spectroscopy (XPS)), and biocompatibility tests (i.e., fibroblast cell culture, platelet adhesion, and animal studies). The results revealed that parylene, a crystalline and brittle coating, exhibited satisfactory film adhesion and relative hydrophobicity, thereby contributing to its effective barrier properties. Fibroblast cell culturing on the parylene-deposited specimen demonstrated improved cell proliferation and equivalent to or superior blood compatibility than that of the medical-grade silicone (currently used clinically). In the animal study, parylene coatings exhibited similar subcutaneous inflammatory reactions compared with the medical-grade silicone. Both in vitro and in vivo tests demonstrated the satisfactory biocompatibility of parylene coatings. - Highlights: • A complete investigation to identify the characteristics of parylene coatings on general-purpose silicones. • Microstructures, surface properties and mechanical properties of parylene coatings were examined. • In vitro (Cell culture, platelet adhesion) tests and animal studies revealed satisfactory biocompatibility. • An alternative of medical-grade silicones is expected to be obtained.

  6. Development of a general-purpose method for cell purification using Cre/loxP-mediated recombination.

    Science.gov (United States)

    Kuroki, Shunsuke; Akiyoshi, Mika; Ideguchi, Ko; Kitano, Satsuki; Miyachi, Hitoshi; Hirose, Michiko; Mise, Nathan; Abe, Kuniya; Ogura, Atsuo; Tachibana, Makoto

    2015-06-01

    A mammalian body is composed of more than 200 different types of cells. The purification of a certain cell type from tissues/organs enables a wide variety of studies. One popular cell purification method is immunological isolation, using antibodies against specific cell surface antigens. However, this is not a general-purpose method, since suitable antigens have not been found in certain cell types, including embryonic gonadal somatic cells and Sertoli cells. To address this issue, we established a knock-in mouse line, named R26 KI, designed to express the human cell surface antigen hCD271 through Cre/loxP-mediated recombination. First, we used the R26 Kl mouse line to purify embryonic gonadal somatic cells. Gonadal somatic cells were purified from the R26 KI; Nr5a1-Cre-transgenic (tg) embryos almost equally as efficiently as from Nr5a1-hCD271-tg embryos. Second, we used the R26 KI mouse line to purify Sertoli cells successfully from R26 KI; Amh-Cre-tg testes. In summary, we propose that the R26 KI mouse line is a powerful tool for the purification of various cell types. © 2015 Wiley Periodicals, Inc.

  7. STICK: Spike Time Interval Computational Kernel, a Framework for General Purpose Computation Using Neurons, Precise Timing, Delays, and Synchrony.

    Science.gov (United States)

    Lagorce, Xavier; Benosman, Ryad

    2015-11-01

    There has been significant research over the past two decades in developing new platforms for spiking neural computation. Current neural computers are primarily developed to mimic biology. They use neural networks, which can be trained to perform specific tasks to mainly solve pattern recognition problems. These machines can do more than simulate biology; they allow us to rethink our current paradigm of computation. The ultimate goal is to develop brain-inspired general purpose computation architectures that can breach the current bottleneck introduced by the von Neumann architecture. This work proposes a new framework for such a machine. We show that the use of neuron-like units with precise timing representation, synaptic diversity, and temporal delays allows us to set a complete, scalable compact computation framework. The framework provides both linear and nonlinear operations, allowing us to represent and solve any function. We show usability in solving real use cases from simple differential equations to sets of nonlinear differential equations leading to chaotic attractors.

  8. Architecture of a general purpose embedded Slow-Control Adapter ASIC for future high-energy physics experiments

    International Nuclear Information System (INIS)

    Gabrielli, Alessandro; Loddo, Flavio; Ranieri, Antonio; De Robertis, Giuseppe

    2008-01-01

    This work is aimed at defining the architecture of a new digital ASIC, namely Slow-Control Adapter (SCA), which will be designed in a commercial 130-nm CMOS technology. This chip will be embedded within a high-speed data acquisition optical link (GBT) to control and monitor the front-end electronics in future high-energy physics experiments. The GBT link provides a transparent transport layer between the SCA and control electronics in the counting room. The proposed SCA supports a variety of common bus protocols to interface with end-user general-purpose electronics. Between the GBT and the SCA a standard 100 Mb/s IEEE-802.3 compatible protocol will be implemented. This standard protocol allows off-line tests of the prototypes using commercial components that support the same standard. The project is justified because embedded applications in modern large HEP experiments require particular care to assure the lowest possible power consumption, still offering the highest reliability demanded by very large particle detectors.

  9. Computer-assisted analyses of (/sup 14/C)2-DG autoradiographs employing a general purpose image processing system

    Energy Technology Data Exchange (ETDEWEB)

    Porro, C; Biral, G P [Modena Univ. (Italy). Ist. di Fisiologia Umana; Fonda, S; Baraldi, P [Modena Univ. (Italy). Lab. di Bioingegneria della Clinica Oculistica; Cavazzuti, M [Modena Univ. (Italy). Clinica Neurologica

    1984-09-01

    A general purpose image processing system is described including B/W TV camera, high resolution image processor and display system (TESAK VDC 501), computer (DEC PDP 11/23) and monochrome and color monitors. Images may be acquired from a microscope equipped with a TV camera or using the TV in direct viewing; the A/D converter and the image processor provides fast (40 ms) and precise (512x512 data points) digitization of TV signal with a 256 gray levels maximum resolution. Computer programs have been developed in order to perform qualitative and quantitative analyses of autoradiographs obtained with the 2-DG method, which are written in FORTRAN and MACRO 11 Assembly Language. They include: (1) procedures designed to recognize errors in acquisition due to possible image shading and correct them via software; (2) routines suitable for qualitative analyses of the whole image or selected regions of it, providing the opportunity for pseudocolor coding, statistics, graphic overlays; (3) programs permitting the conversion of gray levels into metabolic rates of glucose utilization and the display of gray- or color-coded metabolic maps.

  10. Design and Deployment of a General Purpose, Open Source LoRa to Wi-Fi Hub and Data Logger

    Science.gov (United States)

    DeBell, T. C.; Udell, C.; Kwon, M.; Selker, J. S.; Lopez Alcala, J. M.

    2017-12-01

    Methods and technologies facilitating internet connectivity and near-real-time status updates for in site environmental sensor data are of increasing interest in Earth Science. However, Open Source, Do-It-Yourself technologies that enable plug and play functionality for web-connected sensors and devices remain largely inaccessible for typical researchers in our community. The Openly Published Environmental Sensing Lab at Oregon State University (OPEnS Lab) constructed an Open Source 900 MHz Long Range Radio (LoRa) receiver hub with SD card data logger, Ethernet and Wi-Fi shield, and 3D printed enclosure that dynamically uploads transmissions from multiple wirelessly-connected environmental sensing devices. Data transmissions may be received from devices up to 20km away. The hub time-stamps, saves to SD card, and uploads all transmissions to a Google Drive spreadsheet to be accessed in near-real-time by researchers and GeoVisualization applications (such as Arc GIS) for access, visualization, and analysis. This research expands the possibilities of scientific observation of our Earth, transforming the technology, methods, and culture by combining open-source development and cutting edge technology. This poster details our methods and evaluates the application of using 3D printing, Arduino Integrated Development Environment (IDE), Adafruit's Open-Hardware Feather development boards, and the WIZNET5500 Ethernet shield for designing this open-source, general purpose LoRa to Wi-Fi data logger.

  11. Cafe Variome: general-purpose software for making genotype-phenotype data discoverable in restricted or open access contexts.

    Science.gov (United States)

    Lancaster, Owen; Beck, Tim; Atlan, David; Swertz, Morris; Thangavelu, Dhiwagaran; Veal, Colin; Dalgleish, Raymond; Brookes, Anthony J

    2015-10-01

    Biomedical data sharing is desirable, but problematic. Data "discovery" approaches-which establish the existence rather than the substance of data-precisely connect data owners with data seekers, and thereby promote data sharing. Cafe Variome (http://www.cafevariome.org) was therefore designed to provide a general-purpose, Web-based, data discovery tool that can be quickly installed by any genotype-phenotype data owner, or network of data owners, to make safe or sensitive content appropriately discoverable. Data fields or content of any type can be accommodated, from simple ID and label fields through to extensive genotype and phenotype details based on ontologies. The system provides a "shop window" in front of data, with main interfaces being a simple search box and a powerful "query-builder" that enable very elaborate queries to be formulated. After a successful search, counts of records are reported grouped by "openAccess" (data may be directly accessed), "linkedAccess" (a source link is provided), and "restrictedAccess" (facilitated data requests and subsequent provision of approved records). An administrator interface provides a wide range of options for system configuration, enabling highly customized single-site or federated networks to be established. Current uses include rare disease data discovery, patient matchmaking, and a Beacon Web service. © 2015 WILEY PERIODICALS, INC.

  12. The uniqueness of the Fisher metric as information metric

    Czech Academy of Sciences Publication Activity Database

    Le, Hong-Van

    2017-01-01

    Roč. 69, č. 4 (2017), s. 879-896 ISSN 0020-3157 Institutional support: RVO:67985840 Keywords : Chentsov’s theorem * mixed topology * monotonicity of the Fisher metric Subject RIV: BA - General Mathematics OBOR OECD: Pure mathematics Impact factor: 1.049, year: 2016 https://link.springer.com/article/10.1007%2Fs10463-016-0562-0

  13. The ESPAT tool: a general-purpose DSS shell for solving stochastic optimization problems in complex river-aquifer systems

    Science.gov (United States)

    Macian-Sorribes, Hector; Pulido-Velazquez, Manuel; Tilmant, Amaury

    2015-04-01

    Stochastic programming methods are better suited to deal with the inherent uncertainty of inflow time series in water resource management. However, one of the most important hurdles in their use in practical implementations is the lack of generalized Decision Support System (DSS) shells, usually based on a deterministic approach. The purpose of this contribution is to present a general-purpose DSS shell, named Explicit Stochastic Programming Advanced Tool (ESPAT), able to build and solve stochastic programming problems for most water resource systems. It implements a hydro-economic approach, optimizing the total system benefits as the sum of the benefits obtained by each user. It has been coded using GAMS, and implements a Microsoft Excel interface with a GAMS-Excel link that allows the user to introduce the required data and recover the results. Therefore, no GAMS skills are required to run the program. The tool is divided into four modules according to its capabilities: 1) the ESPATR module, which performs stochastic optimization procedures in surface water systems using a Stochastic Dual Dynamic Programming (SDDP) approach; 2) the ESPAT_RA module, which optimizes coupled surface-groundwater systems using a modified SDDP approach; 3) the ESPAT_SDP module, capable of performing stochastic optimization procedures in small-size surface systems using a standard SDP approach; and 4) the ESPAT_DET module, which implements a deterministic programming procedure using non-linear programming, able to solve deterministic optimization problems in complex surface-groundwater river basins. The case study of the Mijares river basin (Spain) is used to illustrate the method. It consists in two reservoirs in series, one aquifer and four agricultural demand sites currently managed using historical (XIV century) rights, which give priority to the most traditional irrigation district over the XX century agricultural developments. Its size makes it possible to use either the SDP or

  14. In vivo dosimetry in intraoperative electron radiotherapy. microMOSFETs, radiochromic films and a general-purpose linac

    Energy Technology Data Exchange (ETDEWEB)

    Lopez-Tarjuelo, Juan; Marco-Blancas, Noelia de; Santos-Serra, Agustin; Quiros-Higueras, Juan David [Consorcio Hospitalario Provincial de Castellon, Servicio de Radiofisica y Proteccion Radiologica, Castellon de la Plana (Spain); Bouche-Babiloni, Ana; Morillo-Macias, Virginia; Ferrer-Albiach, Carlos [Consorcio Hospitalario Provincial de Castellon, Servicio de Oncologia Radioterapica, Castellon de la Plana (Spain)

    2014-11-15

    In vivo dosimetry is desirable for the verification, recording, and eventual correction of treatment in intraoperative electron radiotherapy (IOERT). Our aim is to share our experience of metal oxide semiconductor field-effect transistors (MOSFETs) and radiochromic films with patients undergoing IOERT using a general-purpose linac. We used MOSFETs inserted into sterile bronchus catheters and radiochromic films that were cut, digitized, and sterilized by means of gas plasma. In all, 59 measurements were taken from 27 patients involving 15 primary tumors (seven breast and eight non-breast tumors) and 12 relapses. Data were subjected to an outliers' analysis and classified according to their compatibility with the relevant doses. Associations were sought regarding the type of detector, breast and non-breast irradiation, and the radiation oncologist's assessment of the difficulty of detector placement. At the same time, 19 measurements were carried out at the tumor bed with both detectors. MOSFET measurements (D = 93.5 %, s{sub D} = 6.5 %) were not significantly shifted from film measurements (D = 96.0 %, s{sub D} = 5.5 %; p = 0.109), and no associations were found (p = 0.526, p = 0.295, and p = 0.501, respectively). As regards measurements performed at the tumor bed with both detectors, MOSFET measurements (D = 95.0 %, s{sub D} = 5.4 %) were not significantly shifted from film measurements (D = 96.4 %, s{sub D} = 5.0 %; p = 0.363). In vivo dosimetry can produce satisfactory results at every studied location with a general-purpose linac. Detector choice should depend on user factors, not on the detector performance itself. Surgical team collaboration is crucial to success. (orig.) [German] Die In-vivo-Dosimetrie ist wuenschenswert fuer die Ueberpruefung, Registrierung und die eventuelle Korrektur der Behandlungen in der IOERT (''Intraoperative Electron Radiation Therapy''). Unser Ziel ist die Veroeffentlichung unserer Erfahrungen beim

  15. On Nakhleh's metric for reduced phylogenetic networks

    OpenAIRE

    Cardona, Gabriel; Llabrés, Mercè; Rosselló, Francesc; Valiente Feruglio, Gabriel Alejandro

    2009-01-01

    We prove that Nakhleh’s metric for reduced phylogenetic networks is also a metric on the classes of tree-child phylogenetic networks, semibinary tree-sibling time consistent phylogenetic networks, and multilabeled phylogenetic trees. We also prove that it separates distinguishable phylogenetic networks. In this way, it becomes the strongest dissimilarity measure for phylogenetic networks available so far. Furthermore, we propose a generalization of that metric that separates arbitrary phyl...

  16. Gravitational lensing in metric theories of gravity

    International Nuclear Information System (INIS)

    Sereno, Mauro

    2003-01-01

    Gravitational lensing in metric theories of gravity is discussed. I introduce a generalized approximate metric element, inclusive of both post-post-Newtonian contributions and a gravitomagnetic field. Following Fermat's principle and standard hypotheses, I derive the time delay function and deflection angle caused by an isolated mass distribution. Several astrophysical systems are considered. In most of the cases, the gravitomagnetic correction offers the best perspectives for an observational detection. Actual measurements distinguish only marginally different metric theories from each other

  17. Creep properties of forged 2219 T6 aluminum alloy shell of general-purpose heat source-radioisotope thermoelectric generator

    International Nuclear Information System (INIS)

    Hammond, J.P.

    1981-12-01

    The shell (2219 T6 aluminum forging) of the General Purpose Heat Source-Radioisotope Thermoelectric Generator was designed to retain the generator under sufficient elastic stress to secure it during space flight. A major concern was the extent to which the elastic stress would relax by creep. To determine acceptability of the shell construction material, the following proof tests simulating service were performed: 600 h of testing at 270 0 C under 24.1 MPa stress followed by 10,000 h of storage at 177 0 C under 55.1 MPa, both on the ground; and 10,000 h of flight in space at 270 0 C under 34.4 MPa stress. Additionally, systematic creep testing was performed at 177 and 260 0 C to establish creep design curves. The creep tests performed at 177 0 C revealed comparatively large amounts of primary creep followed by small amounts of secondary creep. The early creep is believed to be abetted by unstable substructures that are annealed out during testing at this temperature. The creep tests performed at 270 0 C showed normal primary creep followed by large amounts of secondary creep. Duplicate proof tests simulating the ground exposure conditions gave results that were in good agreement. The proof test simulating space flight at 270 0 C gave 0.11% primary creep followed by 0.59% secondary creep. About 10% of the second-stage creep was caused by four or five instantaneous strains, which began at the 4500-h mark. One or two of these strain bursts, occurred in each of several other tests at 177 and 260 0 C but were assessed as very moderate in magnitude. The effect is attributable to a slightly microsegregated condition remaining from the original cast structure

  18. Development and validation of a general-purpose ASIC chip for the control of switched reluctance machines

    International Nuclear Information System (INIS)

    Chen Haijin; Lu Shengli; Shi Longxing

    2009-01-01

    A general-purpose application specific integrated circuit (ASIC) chip for the control of switched reluctance machines (SRMs) was designed and validated to fill the gap between the microcontroller capability and the controller requirements of high performance switched reluctance drive (SRD) systems. It can be used for the control of SRM running either in low speed or in high-speed, i.e., either in chopped current control (CCC) mode or in angular position control (APC) mode. Main functions of the chip include filtering and cycle calculation of rotor angular position signals, commutation logic according to rotor cycle and turn-on/turn-off angles (θ on /θ off ), controllable pulse width modulation (PWM) waveforms generation, chopping control with adjustable delay time, and commutation control with adjustable delay time. All the control parameters of the chip are set online by the microcontroller through a serial peripheral interface (SPI). The chip has been designed with the standard cell based design methodology, and implemented in the central semiconductor manufacturing corporation (CSMC) 0.5 μm complementary metal-oxide-semiconductor (CMOS) process technology. After a successful automatic test equipment (ATE) test using the Nextest's Maverick test system, the chip was further validated through an experimental three-phase 6/2-pole SRD system. Both the ATE test and experimental validation results show that the chip can meet the control requirements of high performance SRD systems, and simplify the controller construction. For a resolution of 0.36 deg. (electrical degree), the chip's maximum processable frequency of the rotor angular position signals is 10 kHz, which is 300,000 rev/min when a three-phase 6/2-pole SRM is concerned

  19. The EB factory project. I. A fast, neural-net-based, general purpose light curve classifier optimized for eclipsing binaries

    International Nuclear Information System (INIS)

    Paegert, Martin; Stassun, Keivan G.; Burger, Dan M.

    2014-01-01

    We describe a new neural-net-based light curve classifier and provide it with documentation as a ready-to-use tool for the community. While optimized for identification and classification of eclipsing binary stars, the classifier is general purpose, and has been developed for speed in the context of upcoming massive surveys such as the Large Synoptic Survey Telescope. A challenge for classifiers in the context of neural-net training and massive data sets is to minimize the number of parameters required to describe each light curve. We show that a simple and fast geometric representation that encodes the overall light curve shape, together with a chi-square parameter to capture higher-order morphology information results in efficient yet robust light curve classification, especially for eclipsing binaries. Testing the classifier on the ASAS light curve database, we achieve a retrieval rate of 98% and a false-positive rate of 2% for eclipsing binaries. We achieve similarly high retrieval rates for most other periodic variable-star classes, including RR Lyrae, Mira, and delta Scuti. However, the classifier currently has difficulty discriminating between different sub-classes of eclipsing binaries, and suffers a relatively low (∼60%) retrieval rate for multi-mode delta Cepheid stars. We find that it is imperative to train the classifier's neural network with exemplars that include the full range of light curve quality to which the classifier will be expected to perform; the classifier performs well on noisy light curves only when trained with noisy exemplars. The classifier source code, ancillary programs, a trained neural net, and a guide for use, are provided.

  20. Kerr metric in the deSitter background

    International Nuclear Information System (INIS)

    Vaidya, P.C.

    1984-01-01

    In addition to the Kerr metric with cosmological constant Λ several other metrics are presented giving a Kerr-like solution of Einstein's equations in the background of deSitter universe. A new metric of what may be termed as rotating deSitter space-time devoid of matter but containing null fluid with twisting null rays, has been presented. This metric reduces to the standard deSitter metric when the twist in the rays vanishes. Kerr metric in this background is the immediate generalization of Schwarzschild's exterior metric with cosmological constant. (author)

  1. General Purpose Ground Forces: What Purpose?

    National Research Council Canada - National Science Library

    Challis, Dan

    1993-01-01

    "New World Order," a phrase uttered frequently by former President George Bush during and after the Persian Gulf War, no longer connotes the optimism of America's global view at the end of Desert Storm...

  2. "Why Do I Have to Take This Course?": How Academic Advisers Can Help Students Find Personal Meaning and Purpose in General Education

    Science.gov (United States)

    Kirk-Kuwaye, Michael; Sano-Franchini, Dominic

    2015-01-01

    For a variety of reasons, student engagement in general education continues to be a challenge. Perhaps one way to increase engagement is to connect general education with a deep student need: finding meaning and purpose in their lives or exploring what some have called "big questions." Recent scholarship has defined these clusters of…

  3. The Treatment of Polysemy and Homonymy in Monolingual General-purpose Dictionaries with Special Reference to Isichazamazwi SesiNdebele

    Directory of Open Access Journals (Sweden)

    Eventhough Ndlovu

    2011-10-01

    Full Text Available

    ABSTRACT: This article focuses on the treatment of polysemy and homonymy in general-purpose monolingual dictionaries with special reference to Isichazamazwi SesiNdebele. It was found that there are some inconsistencies in the treatment of polysemous and homonymous entries in this dictionary. The article shows that an overreliance on one criterion, particularly etymology, to distinguish polysemy and homonymy is often misleading and unreliable. Polysemy itself has its own inherent complexities, among these being the problem of determining the exact number of meanings of a polysemous lemma. When the meanings of a polysemous lemma are listed, the central or primary meaning, which is not always easily ascertainable, should come first. A holistic approach is proposed to distinguish polysemy and homonymy, which entails the use of the following criteria: etymology, relatedness vs unrelatedness of meaning, componential analysis, the identification of the central or core meaning and the test of ambiguity. Whatever results are obtained from a particular criterion, these findings must be compared with those of other criteria, and verified against native speakers' intuitive knowledge and introspective judgements.

    OPSOMMING: Die behandeling van polisemie en homonimie in eentalige algemene woordeboeke met spesiale verwysing na Isichazamazwi SesiNdebele. Hierdie artikel fokus op die behandeling van polisemie en homonimie in algemene eentalige woordeboeke met spesiale verwysing na Isichazamazwi SesiNdebele. Daar is vasgestel dat daar 'n aantal inkonsekwensies in die behandeling van poliseme en homonieme inskrywings in hierdie woordeboek is. Die artikel toon dat 'n te groot steun op een kriterium, veral etimologie, om polisemie en homonimie te onderskei, dikwels misleidend en onbetroubaar is. Polisemie self het sy eie inherente gekompliseerdhede waarvan sommige die probleem is om die presiese aantal betekenisse van 'n poliseme lemma te bepaal. Wanneer

  4. Regge calculus from discontinuous metrics

    International Nuclear Information System (INIS)

    Khatsymovsky, V.M.

    2003-01-01

    Regge calculus is considered as a particular case of the more general system where the linklengths of any two neighbouring 4-tetrahedra do not necessarily coincide on their common face. This system is treated as that one described by metric discontinuous on the faces. In the superspace of all discontinuous metrics the Regge calculus metrics form some hypersurface defined by continuity conditions. Quantum theory of the discontinuous metric system is assumed to be fixed somehow in the form of quantum measure on (the space of functionals on) the superspace. The problem of reducing this measure to the Regge hypersurface is addressed. The quantum Regge calculus measure is defined from a discontinuous metric measure by inserting the δ-function-like phase factor. The requirement that continuity conditions be imposed in a 'face-independent' way fixes this factor uniquely. The term 'face-independent' means that this factor depends only on the (hyper)plane spanned by the face, not on it's form and size. This requirement seems to be natural from the viewpoint of existence of the well-defined continuum limit maximally free of lattice artefacts

  5. METRIC context unit architecture

    Energy Technology Data Exchange (ETDEWEB)

    Simpson, R.O.

    1988-01-01

    METRIC is an architecture for a simple but powerful Reduced Instruction Set Computer (RISC). Its speed comes from the simultaneous processing of several instruction streams, with instructions from the various streams being dispatched into METRIC's execution pipeline as they become available for execution. The pipeline is thus kept full, with a mix of instructions for several contexts in execution at the same time. True parallel programming is supported within a single execution unit, the METRIC Context Unit. METRIC's architecture provides for expansion through the addition of multiple Context Units and of specialized Functional Units. The architecture thus spans a range of size and performance from a single-chip microcomputer up through large and powerful multiprocessors. This research concentrates on the specification of the METRIC Context Unit at the architectural level. Performance tradeoffs made during METRIC's design are discussed, and projections of METRIC's performance are made based on simulation studies.

  6. Group covariance and metrical theory

    International Nuclear Information System (INIS)

    Halpern, L.

    1983-01-01

    The a priori introduction of a Lie group of transformations into a physical theory has often proved to be useful; it usually serves to describe special simplified conditions before a general theory can be worked out. Newton's assumptions of absolute space and time are examples where the Euclidian group and translation group have been introduced. These groups were extended to the Galilei group and modified in the special theory of relativity to the Poincare group to describe physics under the given conditions covariantly in the simplest way. The criticism of the a priori character leads to the formulation of the general theory of relativity. The general metric theory does not really give preference to a particular invariance group - even the principle of equivalence can be adapted to a whole family of groups. The physical laws covariantly inserted into the metric space are however adapted to the Poincare group. 8 references

  7. Metric diffusion along foliations

    CERN Document Server

    Walczak, Szymon M

    2017-01-01

    Up-to-date research in metric diffusion along compact foliations is presented in this book. Beginning with fundamentals from the optimal transportation theory and the theory of foliations; this book moves on to cover Wasserstein distance, Kantorovich Duality Theorem, and the metrization of the weak topology by the Wasserstein distance. Metric diffusion is defined, the topology of the metric space is studied and the limits of diffused metrics along compact foliations are discussed. Essentials on foliations, holonomy, heat diffusion, and compact foliations are detailed and vital technical lemmas are proved to aide understanding. Graduate students and researchers in geometry, topology and dynamics of foliations and laminations will find this supplement useful as it presents facts about the metric diffusion along non-compact foliation and provides a full description of the limit for metrics diffused along foliation with at least one compact leaf on the two dimensions.

  8. App Usage Factor: A Simple Metric to Compare the Population Impact of Mobile Medical Apps.

    Science.gov (United States)

    Lewis, Thomas Lorchan; Wyatt, Jeremy C

    2015-08-19

    One factor when assessing the quality of mobile apps is quantifying the impact of a given app on a population. There is currently no metric which can be used to compare the population impact of a mobile app across different health care disciplines. The objective of this study is to create a novel metric to characterize the impact of a mobile app on a population. We developed the simple novel metric, app usage factor (AUF), defined as the logarithm of the product of the number of active users of a mobile app with the median number of daily uses of the app. The behavior of this metric was modeled using simulated modeling in Python, a general-purpose programming language. Three simulations were conducted to explore the temporal and numerical stability of our metric and a simulated app ecosystem model using a simulated dataset of 20,000 apps. Simulations confirmed the metric was stable between predicted usage limits and remained stable at extremes of these limits. Analysis of a simulated dataset of 20,000 apps calculated an average value for the app usage factor of 4.90 (SD 0.78). A temporal simulation showed that the metric remained stable over time and suitable limits for its use were identified. A key component when assessing app risk and potential harm is understanding the potential population impact of each mobile app. Our metric has many potential uses for a wide range of stakeholders in the app ecosystem, including users, regulators, developers, and health care professionals. Furthermore, this metric forms part of the overall estimate of risk and potential for harm or benefit posed by a mobile medical app. We identify the merits and limitations of this metric, as well as potential avenues for future validation and research.

  9. Prognostic Performance Metrics

    Data.gov (United States)

    National Aeronautics and Space Administration — This chapter presents several performance metrics for offline evaluation of prognostics algorithms. A brief overview of different methods employed for performance...

  10. Overview of journal metrics

    Directory of Open Access Journals (Sweden)

    Kihong Kim

    2018-02-01

    Full Text Available Various kinds of metrics used for the quantitative evaluation of scholarly journals are reviewed. The impact factor and related metrics including the immediacy index and the aggregate impact factor, which are provided by the Journal Citation Reports, are explained in detail. The Eigenfactor score and the article influence score are also reviewed. In addition, journal metrics such as CiteScore, Source Normalized Impact per Paper, SCImago Journal Rank, h-index, and g-index are discussed. Limitations and problems that these metrics have are pointed out. We should be cautious to rely on those quantitative measures too much when we evaluate journals or researchers.

  11. Fixed point theory in metric type spaces

    CERN Document Server

    Agarwal, Ravi P; O’Regan, Donal; Roldán-López-de-Hierro, Antonio Francisco

    2015-01-01

    Written by a team of leading experts in the field, this volume presents a self-contained account of the theory, techniques and results in metric type spaces (in particular in G-metric spaces); that is, the text approaches this important area of fixed point analysis beginning from the basic ideas of metric space topology. The text is structured so that it leads the reader from preliminaries and historical notes on metric spaces (in particular G-metric spaces) and on mappings, to Banach type contraction theorems in metric type spaces, fixed point theory in partially ordered G-metric spaces, fixed point theory for expansive mappings in metric type spaces, generalizations, present results and techniques in a very general abstract setting and framework. Fixed point theory is one of the major research areas in nonlinear analysis. This is partly due to the fact that in many real world problems fixed point theory is the basic mathematical tool used to establish the existence of solutions to problems which arise natur...

  12. 77 FR 18899 - To Modify Duty-Free Treatment Under the Generalized System of Preferences and For Other Purposes

    Science.gov (United States)

    2012-03-29

    ... Generalized System of Preferences (GSP) if such country fails to act in good faith in recognizing as binding or in enforcing arbitral awards in favor of United States citizens or a corporation, partnership, or... faith in enforcing arbitral awards in favor of United States citizens or a corporation, partnership, or...

  13. Text messaging among residents and faculty in a university general surgery residency program: prevalence, purpose, and patient care.

    Science.gov (United States)

    Shah, Dhruvil R; Galante, Joseph M; Bold, Richard J; Canter, Robert J; Martinez, Steve R

    2013-01-01

    There is little information about the use of text messaging (texting) devices among resident and faculty physicians for patient-related care (PRC). To determine the prevalence, frequency, purpose, and concerns regarding texting among resident and attending surgeons and to identify factors associated with PRC texting. E-mail survey. University medical center and its affiliated hospitals. Surgery resident and attending staff. Prevalence, frequency, purpose, and concerns regarding patient-related care text messaging. Overall, 73 (65%) surveyed physicians responded, including 45 resident (66%) and 28 attending surgeons (62%). All respondents owned a texting device. Majority of surgery residents (88%) and attendings (71%) texted residents, whereas only 59% of residents and 65% of attendings texted other faculty. Most resident to resident text occurred at a frequency of 3-5 times/d (43%) compared with most attending to resident texts, which occurred 1-2 times/d (33%). Most resident to attending (25%) and attending to attending (30%) texts occurred 1-2 times/d. Among those that texted, PRC was the most frequently reported purpose for resident to resident (46%), resident to attending (64%), attending to resident (82%), and attending to other attending staff (60%) texting. Texting was the most preferred method to communicate about routine PRC (47% of residents vs 44% of attendings). Age (OR: 0.86, 95% CI: 0.79-0.95; p = 0.003), but not sex, specialty/clinical rotation, academic rank, or postgraduate year (PGY) level predicted PRC texting. Most resident and attending staff surveyed utilize texting, mostly for PRC. Texting was preferred for communicating routine PRC information. Our data may facilitate the development of guidelines for the appropriate use of PRC texting. Copyright © 2013 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

  14. General Purpose Force Capability; the Challenge of Versatility and Achieving Balance Along the Widest Possible Spectrum of Conflict

    Science.gov (United States)

    2010-04-01

    STRATEGY 16 Ir 16 Balance 17 The Imbalance between Traditional and Irregul 17 Finding the Proper Balance 18 CHAPTER 3 - DEFINING 20 Introduction 20...wider struggle for control and support of the contested c ir warfare as well as W 41      4. IRREGULAR WARFARE – HISTORICAL CONTEXT AND CURRENT...Congressional Research Service, Washington, D.C., July 20, 2009. R 1984. homas E. The Gamble: General David Petraeus and the American Military

  15. "I Love Knowing That What I'm Doing Has Purpose": Male Instrumentalists Who Choose to Teach Elementary General Music

    Science.gov (United States)

    Shouldice, Heather Nelson

    2017-01-01

    Few entering music education students plan to teach in an elementary general music (EGM) setting, and the majority of those who teach EGM are female and have vocalist backgrounds. The purpose of this collective case study was to examine six male instrumentalists' decisions to pursue a career in EGM teaching rather than secondary instrumental…

  16. Brand metrics that matter

    NARCIS (Netherlands)

    Muntinga, D.; Bernritter, S.

    2017-01-01

    Het merk staat steeds meer centraal in de organisatie. Het is daarom essentieel om de gezondheid, prestaties en ontwikkelingen van het merk te meten. Het is echter een uitdaging om de juiste brand metrics te selecteren. Een enorme hoeveelheid metrics vraagt de aandacht van merkbeheerders. Maar welke

  17. Privacy Metrics and Boundaries

    NARCIS (Netherlands)

    L-F. Pau (Louis-François)

    2005-01-01

    textabstractThis paper aims at defining a set of privacy metrics (quantitative and qualitative) in the case of the relation between a privacy protector ,and an information gatherer .The aims with such metrics are: -to allow to assess and compare different user scenarios and their differences; for

  18. CRSEC: a general purpose Hauser--Feshbach code for the calculation of nuclear cross-sections and thermonuclear reaction rates

    International Nuclear Information System (INIS)

    Woosley, S.; Fowler, W.A.

    1977-09-01

    CRSEC is a FORTRAN IV computer code designed for the efficient calculation of average nuclear cross sections in situations where a statistical theory of nuclear reactions is applicable and where compound nuclear formation is the dominant reaction mechanism. This code generates cross sections of roughly factor of 2 accuracy for incident particle energies in the range of 10 keV to 10 MeV for most target nuclei from magnesium to bismuth. Exceptions usually involve reactions that enter the compound nucleus at such a low energy that fewer than 10 levels are present in the ''energy window of interest.'' The incident particle must be a neutron, proton, or alpha particle, and only binary reactions resulting in the emission of a single n, p, α, or γ (cascade) are calculated. CRSEC is quite fast, a complete calculation of 12 different reactions over a grid of roughly 150 energy points and the generation of Maxwellian averaged rates taking about 30 seconds of CDC7600 time. Also the semi-empirical parameterization of nuclear properties contained in CRSEC is very general. Greater accuracy may be obtained, however, by furnishing specific low-lying excited states, level density parameterization, and nuclear strength functions. A more general version of CRSEC, called CRSECI, is available that conserves isospin properly in all reactions and allows the user to specify a given degree of isospin mixing in the highly excited states of the compound nucleus. Besides the cross section as a function of center-of-mass energy, CRSEC also generates the Maxwell--Boltzmann averaged thermonuclear reaction rate and temperature dependent nuclear partition function for a grid of temperatures from 10 8 to 10 10 0 K. Sections of this report describe in greater detail the physics employed in CRSEC and how to use the code. 2 tables

  19. Comparison of General Purpose Heat Source testing with the ANSI N43.6-1977 (R 1989) sealed source standard

    International Nuclear Information System (INIS)

    Grigsby, C.O.

    1998-01-01

    This analysis provides a comparison of the testing of Radioisotope Thermoelectric Generators (RTGs) and RTG components with the testing requirements of ANSI N43.6-1977 (R1989) ''Sealed Radioactive Sources, Categorization''. The purpose of this comparison is to demonstrate that the RTGs meet or exceed the requirements of the ANSI standard, and thus can be excluded from the radioactive inventory of the Chemistry and Metallurgy Research (CMR) building in Los Alamos per Attachment 1 of DOE STD 1027-92. The approach used in this analysis is as follows: (1) describe the ANSI sealed source classification methodology; (2) develop sealed source performance requirements for the RTG and/or RTG components based on criteria from the accident analysis for CMR; (3) compare the existing RTG or RTG component test data to the CMR requirements; and (4) determine the appropriate ANSI classification for the RTG and/or RTG components based on CMR performance requirements. The CMR requirements for treating RTGs as sealed sources are derived from the radiotoxicity of the isotope ( 238 P7) and amount (13 kg) of radioactive material contained in the RTG. The accident analysis for the CMR BIO identifies the bounding accidents as wing-wide fire, explosion and earthquake. These accident scenarios set the requirements for RTGs or RTG components stored within the CMR

  20. Common fixed point theorems in intuitionistic fuzzy metric spaces and L-fuzzy metric spaces with nonlinear contractive condition

    International Nuclear Information System (INIS)

    Jesic, Sinisa N.; Babacev, Natasa A.

    2008-01-01

    The purpose of this paper is to prove some common fixed point theorems for a pair of R-weakly commuting mappings defined on intuitionistic fuzzy metric spaces [Park JH. Intuitionistic fuzzy metric spaces. Chaos, Solitons and Fractals 2004;22:1039-46] and L-fuzzy metric spaces [Saadati R, Razani A, Adibi H. A common fixed point theorem in L-fuzzy metric spaces. Chaos, Solitons and Fractals, doi:10.1016/j.chaos.2006.01.023], with nonlinear contractive condition, defined with function, first observed by Boyd and Wong [Boyd DW, Wong JSW. On nonlinear contractions. Proc Am Math Soc 1969;20:458-64]. Following Pant [Pant RP. Common fixed points of noncommuting mappings. J Math Anal Appl 1994;188:436-40] we define R-weak commutativity for a pair of mappings and then prove the main results. These results generalize some known results due to Saadati et al., and Jungck [Jungck G. Commuting maps and fixed points. Am Math Mon 1976;83:261-3]. Some examples and comments according to the preceding results are given

  1. Massless and massive quanta resulting from a mediumlike metric tensor

    International Nuclear Information System (INIS)

    Soln, J.

    1985-01-01

    A simple model of the ''primordial'' scalar field theory is presented in which the metric tensor is a generalization of the metric tensor from electrodynamics in a medium. The radiation signal corresponding to the scalar field propagates with a velocity that is generally less than c. This signal can be associated simultaneously with imaginary and real effective (momentum-dependent) masses. The requirement that the imaginary effective mass vanishes, which we take to be the prerequisite for the vacuumlike signal propagation, leads to the ''spontaneous'' splitting of the metric tensor into two distinct metric tensors: one metric tensor gives rise to masslesslike radiation and the other to a massive particle. (author)

  2. Area-based cell colony surviving fraction evaluation: A novel fully automatic approach using general-purpose acquisition hardware.

    Science.gov (United States)

    Militello, Carmelo; Rundo, Leonardo; Conti, Vincenzo; Minafra, Luigi; Cammarata, Francesco Paolo; Mauri, Giancarlo; Gilardi, Maria Carla; Porcino, Nunziatina

    2017-10-01

    The current methodology for the Surviving Fraction (SF) measurement in clonogenic assay, which is a technique to study the anti-proliferative effect of treatments on cell cultures, involves manual counting of cell colony forming units. This procedure is operator-dependent and error-prone. Moreover, the identification of the exact colony number is often not feasible due to the high growth rate leading to the adjacent colony merging. As a matter of fact, conventional assessment does not deal with the colony size, which is generally correlated with the delivered radiation dose or the administered cytotoxic agent. Considering that the Area Covered by Colony (ACC) is proportional to the colony number and size as well as to the growth rate, we propose a novel fully automatic approach exploiting Circle Hough Transform, to automatically detect the wells in the plate, and local adaptive thresholding, which calculates the percentage of ACC for the SF quantification. This measurement relies just on this covering percentage and does not consider the colony number, preventing inconsistencies due to intra- and inter-operator variability. To evaluate the accuracy of the proposed approach, we compared the SFs obtained by our automatic ACC-based method against the conventional counting procedure. The achieved results (r = 0.9791 and r = 0.9682 on MCF7 and MCF10A cells, respectively) showed values highly correlated with the measurements using the traditional approach based on colony number alone. The proposed computer-assisted methodology could be integrated in laboratory practice as an expert system for the SF evaluation in clonogenic assays. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. Author Impact Metrics in Communication Sciences and Disorder Research

    Science.gov (United States)

    Stuart, Andrew; Faucette, Sarah P.; Thomas, William Joseph

    2017-01-01

    Purpose: The purpose was to examine author-level impact metrics for faculty in the communication sciences and disorder research field across a variety of databases. Method: Author-level impact metrics were collected for faculty from 257 accredited universities in the United States and Canada. Three databases (i.e., Google Scholar, ResearchGate,…

  4. Probabilistic metric spaces

    CERN Document Server

    Schweizer, B

    2005-01-01

    Topics include special classes of probabilistic metric spaces, topologies, and several related structures, such as probabilistic normed and inner-product spaces. 1983 edition, updated with 3 new appendixes. Includes 17 illustrations.

  5. Classroom reconstruction of the Schwarzschild metric

    OpenAIRE

    Kassner, Klaus

    2015-01-01

    A promising way to introduce general relativity in the classroom is to study the physical implications of certain given metrics, such as the Schwarzschild one. This involves lower mathematical expenditure than an approach focusing on differential geometry in its full glory and permits to emphasize physical aspects before attacking the field equations. Even so, in terms of motivation, lacking justification of the metric employed may pose an obstacle. The paper discusses how to establish the we...

  6. Bilingual Language Control and General Purpose Cognitive Control among Individuals with Bilingual Aphasia: Evidence Based on Negative Priming and Flanker Tasks

    Science.gov (United States)

    Dash, Tanya; Kar, Bhoomika R.

    2014-01-01

    Background. Bilingualism results in an added advantage with respect to cognitive control. The interaction between bilingual language control and general purpose cognitive control systems can also be understood by studying executive control among individuals with bilingual aphasia. Objectives. The current study examined the subcomponents of cognitive control in bilingual aphasia. A case study approach was used to investigate whether cognitive control and language control are two separate systems and how factors related to bilingualism interact with control processes. Methods. Four individuals with bilingual aphasia performed a language background questionnaire, picture description task, and two experimental tasks (nonlinguistic negative priming task and linguistic and nonlinguistic versions of flanker task). Results. A descriptive approach was used to analyse the data using reaction time and accuracy measures. The cumulative distribution function plots were used to visualize the variations in performance across conditions. The results highlight the distinction between general purpose cognitive control and bilingual language control mechanisms. Conclusion. All participants showed predominant use of the reactive control mechanism to compensate for the limited resources system. Independent yet interactive systems for bilingual language control and general purpose cognitive control were postulated based on the experimental data derived from individuals with bilingual aphasia. PMID:24982591

  7. Bilingual language control and general purpose cognitive control among individuals with bilingual aphasia: evidence based on negative priming and flanker tasks.

    Science.gov (United States)

    Dash, Tanya; Kar, Bhoomika R

    2014-01-01

    Bilingualism results in an added advantage with respect to cognitive control. The interaction between bilingual language control and general purpose cognitive control systems can also be understood by studying executive control among individuals with bilingual aphasia. objectives: The current study examined the subcomponents of cognitive control in bilingual aphasia. A case study approach was used to investigate whether cognitive control and language control are two separate systems and how factors related to bilingualism interact with control processes. Four individuals with bilingual aphasia performed a language background questionnaire, picture description task, and two experimental tasks (nonlinguistic negative priming task and linguistic and nonlinguistic versions of flanker task). A descriptive approach was used to analyse the data using reaction time and accuracy measures. The cumulative distribution function plots were used to visualize the variations in performance across conditions. The results highlight the distinction between general purpose cognitive control and bilingual language control mechanisms. All participants showed predominant use of the reactive control mechanism to compensate for the limited resources system. Independent yet interactive systems for bilingual language control and general purpose cognitive control were postulated based on the experimental data derived from individuals with bilingual aphasia.

  8. IT Project Management Metrics

    Directory of Open Access Journals (Sweden)

    2007-01-01

    Full Text Available Many software and IT projects fail in completing theirs objectives because different causes of which the management of the projects has a high weight. In order to have successfully projects, lessons learned have to be used, historical data to be collected and metrics and indicators have to be computed and used to compare them with past projects and avoid failure to happen. This paper presents some metrics that can be used for the IT project management.

  9. Mass Customization Measurements Metrics

    DEFF Research Database (Denmark)

    Nielsen, Kjeld; Brunø, Thomas Ditlev; Jørgensen, Kaj Asbjørn

    2014-01-01

    A recent survey has indicated that 17 % of companies have ceased mass customizing less than 1 year after initiating the effort. This paper presents measurement for a company’s mass customization performance, utilizing metrics within the three fundamental capabilities: robust process design, choice...... navigation, and solution space development. A mass customizer when assessing performance with these metrics can identify within which areas improvement would increase competitiveness the most and enable more efficient transition to mass customization....

  10. Hybrid metric-Palatini stars

    Science.gov (United States)

    Danilǎ, Bogdan; Harko, Tiberiu; Lobo, Francisco S. N.; Mak, M. K.

    2017-02-01

    We consider the internal structure and the physical properties of specific classes of neutron, quark and Bose-Einstein condensate stars in the recently proposed hybrid metric-Palatini gravity theory, which is a combination of the metric and Palatini f (R ) formalisms. It turns out that the theory is very successful in accounting for the observed phenomenology, since it unifies local constraints at the Solar System level and the late-time cosmic acceleration, even if the scalar field is very light. In this paper, we derive the equilibrium equations for a spherically symmetric configuration (mass continuity and Tolman-Oppenheimer-Volkoff) in the framework of the scalar-tensor representation of the hybrid metric-Palatini theory, and we investigate their solutions numerically for different equations of state of neutron and quark matter, by adopting for the scalar field potential a Higgs-type form. It turns out that the scalar-tensor definition of the potential can be represented as an Clairaut differential equation, and provides an explicit form for f (R ) given by f (R )˜R +Λeff, where Λeff is an effective cosmological constant. Furthermore, stellar models, described by the stiff fluid, radiation-like, bag model and the Bose-Einstein condensate equations of state are explicitly constructed in both general relativity and hybrid metric-Palatini gravity, thus allowing an in-depth comparison between the predictions of these two gravitational theories. As a general result it turns out that for all the considered equations of state, hybrid gravity stars are more massive than their general relativistic counterparts. Furthermore, two classes of stellar models corresponding to two particular choices of the functional form of the scalar field (constant value, and logarithmic form, respectively) are also investigated. Interestingly enough, in the case of a constant scalar field the equation of state of the matter takes the form of the bag model equation of state describing

  11. Pelletron general purpose scattering chamber

    International Nuclear Information System (INIS)

    Chatterjee, A.; Kailas, S.; Kerekette, S.S.; Navin, A.; Kumar, Suresh

    1993-01-01

    A medium sized stainless steel scattering chamber has been constructed for nuclear scattering and reaction experiments at the 14UD pelletron accelerator facility. It has been so designed that several types of detectors, varying from small sized silicon surface barrier detectors to medium sized gas detectors and NaI detectors can be conveniently positioned inside the chamber for detection of charged particles. The chamber has been planned to perform the following types of experiments : angular distributions of elastically scattered particles, fission fragments and other charged particles, angular correlations for charged particles e.g. protons, alphas and fission fragments. (author). 2 figs

  12. General purpose nuclear irradiation chamber

    International Nuclear Information System (INIS)

    Nurul Fadzlin Hasbullah; Nuurul Iffah Che Omar; Nahrul Khair Alang Md Rashid; Jaafar Abdullah

    2013-01-01

    Nuclear technology has found a great need for use in medicine, industry, and research. Smoke detectors in our homes, medical treatments and new varieties of plants by irradiating its seeds are just a few examples of the benefits of nuclear technology. Portable neutron source such as Californium-252, available at Industrial Technology Division (BTI/ PAT), Malaysian Nuclear Agency, has a 2.645 year half-life. However, 252 Cf is known to emit gamma radiation from the source. Thus, this chamber aims to provide a proper gamma shielding for samples to distinguish the use of mixed neutron with gamma-rays or pure neutron radiation. The chamber is compatible to be used with other portable neutron sources such as 241 Am-Be as well as the reactor TRIGA PUSPATI for higher neutron dose. This chamber was designed through a collaborative effort of Kulliyyah Engineering, IIUM with the Industrial Technology Division (BTI) team, Malaysian Nuclear Agency. (Author)

  13. Principle of space existence and De Sitter metric

    International Nuclear Information System (INIS)

    Mal'tsev, V.K.

    1990-01-01

    The selection principle for the solutions of the Einstein equations suggested in a series of papers implies the existence of space (g ik ≠ 0) only in the presence of matter (T ik ≠0). This selection principle (principle of space existence, in the Markov terminology) implies, in the general case, the absence of the cosmological solution with the De Sitter metric. On the other hand, the De Sitter metric is necessary for describing both inflation and deflation periods of the Universe. It is shown that the De Sitter metric is also allowed by the selection principle under discussion if the metric experiences the evolution into the Friedmann metric

  14. Validity of silhouette showcards as a measure of body size and obesity in a population in the African region: A practical research tool for general-purpose surveys.

    Science.gov (United States)

    Yepes, Maryam; Viswanathan, Barathi; Bovet, Pascal; Maurer, Jürgen

    2015-01-01

    The purpose of this study is to validate the Pulvers silhouette showcard as a measure of weight status in a population in the African region. This tool is particularly beneficial when scarce resources do not allow for direct anthropometric measurements due to limited survey time or lack of measurement technology in face-to-face general-purpose surveys or in mailed, online, or mobile device-based surveys. A cross-sectional study was conducted in the Republic of Seychelles with a sample of 1240 adults. We compared self-reported body sizes measured by Pulvers' silhouette showcards to four measurements of body size and adiposity: body mass index (BMI), body fat percent measured, waist circumference, and waist to height ratio. The accuracy of silhouettes as an obesity indicator was examined using sex-specific receiver operator curve (ROC) analysis and the reliability of this tool to detect socioeconomic gradients in obesity was compared to BMI-based measurements. Our study supports silhouette body size showcards as a valid and reliable survey tool to measure self-reported body size and adiposity in an African population. The mean correlation coefficients of self-reported silhouettes with measured BMI were 0.80 in men and 0.81 in women (P general-purpose surveys of obesity in social sciences, where limited resources do not allow for direct anthropometric measurements.

  15. Sensory Metrics of Neuromechanical Trust.

    Science.gov (United States)

    Softky, William; Benford, Criscillia

    2017-09-01

    Today digital sources supply a historically unprecedented component of human sensorimotor data, the consumption of which is correlated with poorly understood maladies such as Internet addiction disorder and Internet gaming disorder. Because both natural and digital sensorimotor data share common mathematical descriptions, one can quantify our informational sensorimotor needs using the signal processing metrics of entropy, noise, dimensionality, continuity, latency, and bandwidth. Such metrics describe in neutral terms the informational diet human brains require to self-calibrate, allowing individuals to maintain trusting relationships. With these metrics, we define the trust humans experience using the mathematical language of computational models, that is, as a primitive statistical algorithm processing finely grained sensorimotor data from neuromechanical interaction. This definition of neuromechanical trust implies that artificial sensorimotor inputs and interactions that attract low-level attention through frequent discontinuities and enhanced coherence will decalibrate a brain's representation of its world over the long term by violating the implicit statistical contract for which self-calibration evolved. Our hypersimplified mathematical understanding of human sensorimotor processing as multiscale, continuous-time vibratory interaction allows equally broad-brush descriptions of failure modes and solutions. For example, we model addiction in general as the result of homeostatic regulation gone awry in novel environments (sign reversal) and digital dependency as a sub-case in which the decalibration caused by digital sensorimotor data spurs yet more consumption of them. We predict that institutions can use these sensorimotor metrics to quantify media richness to improve employee well-being; that dyads and family-size groups will bond and heal best through low-latency, high-resolution multisensory interaction such as shared meals and reciprocated touch; and

  16. Metric reconstruction from Weyl scalars

    Energy Technology Data Exchange (ETDEWEB)

    Whiting, Bernard F; Price, Larry R [Department of Physics, PO Box 118440, University of Florida, Gainesville, FL 32611 (United States)

    2005-08-07

    The Kerr geometry has remained an elusive world in which to explore physics and delve into the more esoteric implications of general relativity. Following the discovery, by Kerr in 1963, of the metric for a rotating black hole, the most major advance has been an understanding of its Weyl curvature perturbations based on Teukolsky's discovery of separable wave equations some ten years later. In the current research climate, where experiments across the globe are preparing for the first detection of gravitational waves, a more complete understanding than concerns just the Weyl curvature is now called for. To understand precisely how comparatively small masses move in response to the gravitational waves they emit, a formalism has been developed based on a description of the whole spacetime metric perturbation in the neighbourhood of the emission region. Presently, such a description is not available for the Kerr geometry. While there does exist a prescription for obtaining metric perturbations once curvature perturbations are known, it has become apparent that there are gaps in that formalism which are still waiting to be filled. The most serious gaps include gauge inflexibility, the inability to include sources-which are essential when the emitting masses are considered-and the failure to describe the l = 0 and 1 perturbation properties. Among these latter properties of the perturbed spacetime, arising from a point mass in orbit, are the perturbed mass and axial component of angular momentum, as well as the very elusive Carter constant for non-axial angular momentum. A status report is given on recent work which begins to repair these deficiencies in our current incomplete description of Kerr metric perturbations.

  17. Metric reconstruction from Weyl scalars

    International Nuclear Information System (INIS)

    Whiting, Bernard F; Price, Larry R

    2005-01-01

    The Kerr geometry has remained an elusive world in which to explore physics and delve into the more esoteric implications of general relativity. Following the discovery, by Kerr in 1963, of the metric for a rotating black hole, the most major advance has been an understanding of its Weyl curvature perturbations based on Teukolsky's discovery of separable wave equations some ten years later. In the current research climate, where experiments across the globe are preparing for the first detection of gravitational waves, a more complete understanding than concerns just the Weyl curvature is now called for. To understand precisely how comparatively small masses move in response to the gravitational waves they emit, a formalism has been developed based on a description of the whole spacetime metric perturbation in the neighbourhood of the emission region. Presently, such a description is not available for the Kerr geometry. While there does exist a prescription for obtaining metric perturbations once curvature perturbations are known, it has become apparent that there are gaps in that formalism which are still waiting to be filled. The most serious gaps include gauge inflexibility, the inability to include sources-which are essential when the emitting masses are considered-and the failure to describe the l = 0 and 1 perturbation properties. Among these latter properties of the perturbed spacetime, arising from a point mass in orbit, are the perturbed mass and axial component of angular momentum, as well as the very elusive Carter constant for non-axial angular momentum. A status report is given on recent work which begins to repair these deficiencies in our current incomplete description of Kerr metric perturbations

  18. Fault Management Metrics

    Science.gov (United States)

    Johnson, Stephen B.; Ghoshal, Sudipto; Haste, Deepak; Moore, Craig

    2017-01-01

    This paper describes the theory and considerations in the application of metrics to measure the effectiveness of fault management. Fault management refers here to the operational aspect of system health management, and as such is considered as a meta-control loop that operates to preserve or maximize the system's ability to achieve its goals in the face of current or prospective failure. As a suite of control loops, the metrics to estimate and measure the effectiveness of fault management are similar to those of classical control loops in being divided into two major classes: state estimation, and state control. State estimation metrics can be classified into lower-level subdivisions for detection coverage, detection effectiveness, fault isolation and fault identification (diagnostics), and failure prognosis. State control metrics can be classified into response determination effectiveness and response effectiveness. These metrics are applied to each and every fault management control loop in the system, for each failure to which they apply, and probabilistically summed to determine the effectiveness of these fault management control loops to preserve the relevant system goals that they are intended to protect.

  19. Deep Transfer Metric Learning.

    Science.gov (United States)

    Junlin Hu; Jiwen Lu; Yap-Peng Tan; Jie Zhou

    2016-12-01

    Conventional metric learning methods usually assume that the training and test samples are captured in similar scenarios so that their distributions are assumed to be the same. This assumption does not hold in many real visual recognition applications, especially when samples are captured across different data sets. In this paper, we propose a new deep transfer metric learning (DTML) method to learn a set of hierarchical nonlinear transformations for cross-domain visual recognition by transferring discriminative knowledge from the labeled source domain to the unlabeled target domain. Specifically, our DTML learns a deep metric network by maximizing the inter-class variations and minimizing the intra-class variations, and minimizing the distribution divergence between the source domain and the target domain at the top layer of the network. To better exploit the discriminative information from the source domain, we further develop a deeply supervised transfer metric learning (DSTML) method by including an additional objective on DTML, where the output of both the hidden layers and the top layer are optimized jointly. To preserve the local manifold of input data points in the metric space, we present two new methods, DTML with autoencoder regularization and DSTML with autoencoder regularization. Experimental results on face verification, person re-identification, and handwritten digit recognition validate the effectiveness of the proposed methods.

  20. Supplier selection using different metric functions

    Directory of Open Access Journals (Sweden)

    Omosigho S.E.

    2015-01-01

    Full Text Available Supplier selection is an important component of supply chain management in today’s global competitive environment. Hence, the evaluation and selection of suppliers have received considerable attention in the literature. Many attributes of suppliers, other than cost, are considered in the evaluation and selection process. Therefore, the process of evaluation and selection of suppliers is a multi-criteria decision making process. The methodology adopted to solve the supplier selection problem is intuitionistic fuzzy TOPSIS (Technique for Order Preference by Similarity to the Ideal Solution. Generally, TOPSIS is based on the concept of minimum distance from the positive ideal solution and maximum distance from the negative ideal solution. We examine the deficiencies of using only one metric function in TOPSIS and propose the use of spherical metric function in addition to the commonly used metric functions. For empirical supplier selection problems, more than one metric function should be used.

  1. Decision Analysis for Metric Selection on a Clinical Quality Scorecard.

    Science.gov (United States)

    Guth, Rebecca M; Storey, Patricia E; Vitale, Michael; Markan-Aurora, Sumita; Gordon, Randolph; Prevost, Traci Q; Dunagan, Wm Claiborne; Woeltje, Keith F

    2016-09-01

    Clinical quality scorecards are used by health care institutions to monitor clinical performance and drive quality improvement. Because of the rapid proliferation of quality metrics in health care, BJC HealthCare found it increasingly difficult to select the most impactful scorecard metrics while still monitoring metrics for regulatory purposes. A 7-step measure selection process was implemented incorporating Kepner-Tregoe Decision Analysis, which is a systematic process that considers key criteria that must be satisfied in order to make the best decision. The decision analysis process evaluates what metrics will most appropriately fulfill these criteria, as well as identifies potential risks associated with a particular metric in order to identify threats to its implementation. Using this process, a list of 750 potential metrics was narrowed to 25 that were selected for scorecard inclusion. This decision analysis process created a more transparent, reproducible approach for selecting quality metrics for clinical quality scorecards. © The Author(s) 2015.

  2. Development of a General-Purpose Analysis System Based on a Programmable Fluid Processor Final Report CRADA No. TC-2027-01

    Energy Technology Data Exchange (ETDEWEB)

    McConaghy, C. F. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Gascoyne, P. R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-09-28

    The purpose ofthis project was to develop a general-purpose analysis system based on a programmable fluid processor (PFP). The PFP is an array of electrodes surrounded by fluid reservoirs and injectors. Injected droplets of various reagents are manjpulated and combined on the array by Dielectrophoretic (DEP) forces. The goal was to create a small handheld device that could accomplish the tasks currently undertaken by much larger, time consuming, manual manipulation in the lab. The entire effo1t was funded by DARPA under the Bio-Flips program. MD Anderson Cancer Center was the PI for the DARPA effort. The Bio-Flips program was a 3- year program that ran from September 2000 to September 2003. The CRADA was somewhat behind the Bi-Flips program running from June 2001 to June 2004 with a no cost extension to September 2004.

  3. METRICS DEVELOPMENT FOR PATENTS.

    Science.gov (United States)

    Veiga, Daniela Francescato; Ferreira, Lydia Masako

    2015-01-01

    To develop a proposal for metrics for patents to be applied in assessing the postgraduate programs of Medicine III - Capes. From the reading and analysis of the 2013 area documents of all the 48 areas of Capes, a proposal for metrics for patents was developed to be applied in Medicine III programs. Except for the areas Biotechnology, Food Science, Biological Sciences III, Physical Education, Engineering I, III and IV and Interdisciplinary, most areas do not adopt a scoring system for patents. The proposal developed was based on the criteria of Biotechnology, with adaptations. In general, it will be valued, in ascending order, the deposit, the granting and licensing/production. It will also be assigned higher scores to patents registered abroad and whenever there is a participation of students. This proposal can be applied to the item Intellectual Production of the evaluation form, in subsection Technical Production/Patents. The percentage of 10% for academic programs and 40% for Masters Professionals should be maintained. The program will be scored as Very Good when it reaches 400 points or over; Good, between 200 and 399 points; Regular, between 71 and 199 points; Weak up to 70 points; Insufficient, no punctuation. Desenvolver uma proposta de métricas para patentes a serem aplicadas na avaliação dos Programas de Pós-Graduação da Área Medicina III - Capes. A partir da leitura e análise dos documentos de área de 2013 de todas as 48 Áreas da Capes, desenvolveu-se uma proposta de métricas para patentes, a ser aplicada na avaliação dos programas da área. Constatou-se que, com exceção das áreas Biotecnologia, Ciência de Alimentos, Ciências Biológicas III, Educação Física, Engenharias I, III e IV e Interdisciplinar, a maioria não adota sistema de pontuação para patentes. A proposta desenvolvida baseou-se nos critérios da Biotecnologia, com adaptações. De uma forma geral, foi valorizado, em ordem crescente, o depósito, a concessão e o

  4. The dynamics of metric-affine gravity

    International Nuclear Information System (INIS)

    Vitagliano, Vincenzo; Sotiriou, Thomas P.; Liberati, Stefano

    2011-01-01

    Highlights: → The role and the dynamics of the connection in metric-affine theories is explored. → The most general second order action does not lead to a dynamical connection. → Including higher order invariants excites new degrees of freedom in the connection. → f(R) actions are also discussed and shown to be a non- representative class. - Abstract: Metric-affine theories of gravity provide an interesting alternative to general relativity: in such an approach, the metric and the affine (not necessarily symmetric) connection are independent quantities. Furthermore, the action should include covariant derivatives of the matter fields, with the covariant derivative naturally defined using the independent connection. As a result, in metric-affine theories a direct coupling involving matter and connection is also present. The role and the dynamics of the connection in such theories is explored. We employ power counting in order to construct the action and search for the minimal requirements it should satisfy for the connection to be dynamical. We find that for the most general action containing lower order invariants of the curvature and the torsion the independent connection does not carry any dynamics. It actually reduces to the role of an auxiliary field and can be completely eliminated algebraically in favour of the metric and the matter field, introducing extra interactions with respect to general relativity. However, we also show that including higher order terms in the action radically changes this picture and excites new degrees of freedom in the connection, making it (or parts of it) dynamical. Constructing actions that constitute exceptions to this rule requires significant fine tuned and/or extra a priori constraints on the connection. We also consider f(R) actions as a particular example in order to show that they constitute a distinct class of metric-affine theories with special properties, and as such they cannot be used as representative toy

  5. Performance of the Research Animal Holding Facility (RAHF) and General Purpose Work Station (GPWS) and other hardware in the microgravity environment

    Science.gov (United States)

    Hogan, Robert P.; Dalton, Bonnie P.

    1991-01-01

    This paper discusses the performance of the Research Animal Holding Facility (RAHF) and General Purpose Work Station (GPWS) plus other associated hardware during the recent flight of Spacelab Life Sciences 1 (SLS-1). The RAHF was developed to provide proper housing (food, water, temperature control, lighting and waste management) for up to 24 rodents during flights on the Spacelab. The GPWS was designed to contain particulates and toxic chemicals generated during plant and animal handling and dissection/fixation activities during space flights. A history of the hardware development involves as well as the redesign activities prior to the actual flight are discussed.

  6. Adaptive metric kernel regression

    DEFF Research Database (Denmark)

    Goutte, Cyril; Larsen, Jan

    2000-01-01

    Kernel smoothing is a widely used non-parametric pattern recognition technique. By nature, it suffers from the curse of dimensionality and is usually difficult to apply to high input dimensions. In this contribution, we propose an algorithm that adapts the input metric used in multivariate...... regression by minimising a cross-validation estimate of the generalisation error. This allows to automatically adjust the importance of different dimensions. The improvement in terms of modelling performance is illustrated on a variable selection task where the adaptive metric kernel clearly outperforms...

  7. Adaptive Metric Kernel Regression

    DEFF Research Database (Denmark)

    Goutte, Cyril; Larsen, Jan

    1998-01-01

    Kernel smoothing is a widely used nonparametric pattern recognition technique. By nature, it suffers from the curse of dimensionality and is usually difficult to apply to high input dimensions. In this paper, we propose an algorithm that adapts the input metric used in multivariate regression...... by minimising a cross-validation estimate of the generalisation error. This allows one to automatically adjust the importance of different dimensions. The improvement in terms of modelling performance is illustrated on a variable selection task where the adaptive metric kernel clearly outperforms the standard...

  8. Probabilistic G-Metric space and some fixed point results

    Directory of Open Access Journals (Sweden)

    A. R. Janfada

    2013-01-01

    Full Text Available In this note we introduce the notions of generalized probabilistic metric spaces and generalized Menger probabilistic metric spaces. After making our elementary observations and proving some basic properties of these spaces, we are going to prove some fixed point result in these spaces.

  9. Social Media Metrics Importance and Usage Frequency in Latvia

    Directory of Open Access Journals (Sweden)

    Ronalds Skulme

    2017-12-01

    Full Text Available Purpose of the article: The purpose of this paper was to explore which social media marketing metrics are most often used and are most important for marketing experts in Latvia and can be used to evaluate marketing campaign effectiveness. Methodology/methods: In order to achieve the aim of this paper several theoretical and practical research methods were used, such as theoretical literature analysis, surveying and grouping. First of all, theoretical research about social media metrics was conducted. Authors collected information about social media metric grouping methods and the most frequently mentioned social media metrics in the literature. The collected information was used as the foundation for the expert surveys. The expert surveys were used to collect information from Latvian marketing professionals to determine which social media metrics are used most often and which social media metrics are most important in Latvia. Scientific aim: The scientific aim of this paper was to identify if social media metrics importance varies depending on the consumer purchase decision stage. Findings: Information about the most important and most often used social media marketing metrics in Latvia was collected. A new social media grouping framework is proposed. Conclusions: The main conclusion is that the importance and the usage frequency of the social media metrics is changing depending of consumer purchase decisions stage the metric is used to evaluate.

  10. A family of metric gravities

    Science.gov (United States)

    Shuler, Robert

    2018-04-01

    The goal of this paper is to take a completely fresh approach to metric gravity, in which the metric principle is strictly adhered to but its properties in local space-time are derived from conservation principles, not inferred from a global field equation. The global field strength variation then gains some flexibility, but only in the regime of very strong fields (2nd-order terms) whose measurement is now being contemplated. So doing provides a family of similar gravities, differing only in strong fields, which could be developed into meaningful verification targets for strong fields after the manner in which far-field variations were used in the 20th century. General Relativity (GR) is shown to be a member of the family and this is demonstrated by deriving the Schwarzschild metric exactly from a suitable field strength assumption. The method of doing so is interesting in itself because it involves only one differential equation rather than the usual four. Exact static symmetric field solutions are also given for one pedagogical alternative based on potential, and one theoretical alternative based on inertia, and the prospects of experimentally differentiating these are analyzed. Whether the method overturns the conventional wisdom that GR is the only metric theory of gravity and that alternatives must introduce additional interactions and fields is somewhat semantical, depending on whether one views the field strength assumption as a field and whether the assumption that produces GR is considered unique in some way. It is of course possible to have other fields, and the local space-time principle can be applied to field gravities which usually are weak-field approximations having only time dilation, giving them the spatial factor and promoting them to full metric theories. Though usually pedagogical, some of them are interesting from a quantum gravity perspective. Cases are noted where mass measurement errors, or distributions of dark matter, can cause one

  11. The time-resolved and extreme conditions XAS (TEXAS) facility at the European Synchrotron Radiation Facility: the general-purpose EXAFS bending-magnet beamline BM23

    Energy Technology Data Exchange (ETDEWEB)

    Mathon, O., E-mail: mathon@esrf.fr; Beteva, A.; Borrel, J.; Bugnazet, D.; Gatla, S.; Hino, R.; Kantor, I.; Mairs, T. [European Synchrotron Radiation Facility, CS 40220, 38043 Grenoble Cedex 9 (France); Munoz, M. [European Synchrotron Radiation Facility, CS 40220, 38043 Grenoble Cedex 9 (France); Université Joseph Fourier, 1381 rue de la Piscine, BP 53, 38041 Grenoble Cedex 9 (France); Pasternak, S.; Perrin, F.; Pascarelli, S. [European Synchrotron Radiation Facility, CS 40220, 38043 Grenoble Cedex 9 (France)

    2015-10-17

    BM23 is the general-purpose EXAFS bending-magnet beamline at the ESRF, replacing the former BM29 beamline in the framework of the ESRF upgrade. Its mission is to serve the whole XAS user community by providing access to a basic service in addition to the many specialized instruments available at the ESRF. BM23 offers high-signal-to-noise ratio EXAFS in a large energy range (5–75 keV), continuous energy scanning for quick-EXAFS on the second timescale and a micro-XAS station delivering a spot size of 4 µm × 4 µm FWHM. BM23 is the general-purpose EXAFS bending-magnet beamline at the ESRF, replacing the former BM29 beamline in the framework of the ESRF upgrade. Its mission is to serve the whole XAS user community by providing access to a basic service in addition to the many specialized instruments available at the ESRF. BM23 offers high signal-to-noise ratio EXAFS in a large energy range (5–75 keV), continuous energy scanning for quick-EXAFS on the second timescale and a micro-XAS station delivering a spot size of 4 µm × 4 µm FWHM. It is a user-friendly facility featuring a high degree of automation, online EXAFS data reduction and a flexible sample environment.

  12. Metrical Phonology and SLA.

    Science.gov (United States)

    Tice, Bradley S.

    Metrical phonology, a linguistic process of phonological stress assessment and diagrammatic simplification of sentence and word stress, is discussed as it is found in the English language with the intention that it may be used in second language instruction. Stress is defined by its physical and acoustical correlates, and the principles of…

  13. Engineering performance metrics

    Science.gov (United States)

    Delozier, R.; Snyder, N.

    1993-03-01

    Implementation of a Total Quality Management (TQM) approach to engineering work required the development of a system of metrics which would serve as a meaningful management tool for evaluating effectiveness in accomplishing project objectives and in achieving improved customer satisfaction. A team effort was chartered with the goal of developing a system of engineering performance metrics which would measure customer satisfaction, quality, cost effectiveness, and timeliness. The approach to developing this system involved normal systems design phases including, conceptual design, detailed design, implementation, and integration. The lessons teamed from this effort will be explored in this paper. These lessons learned may provide a starting point for other large engineering organizations seeking to institute a performance measurement system accomplishing project objectives and in achieving improved customer satisfaction. To facilitate this effort, a team was chartered to assist in the development of the metrics system. This team, consisting of customers and Engineering staff members, was utilized to ensure that the needs and views of the customers were considered in the development of performance measurements. The development of a system of metrics is no different than the development of any type of system. It includes the steps of defining performance measurement requirements, measurement process conceptual design, performance measurement and reporting system detailed design, and system implementation and integration.

  14. Metrics for Probabilistic Geometries

    DEFF Research Database (Denmark)

    Tosi, Alessandra; Hauberg, Søren; Vellido, Alfredo

    2014-01-01

    the distribution over mappings is given by a Gaussian process. We treat the corresponding latent variable model as a Riemannian manifold and we use the expectation of the metric under the Gaussian process prior to define interpolating paths and measure distance between latent points. We show how distances...

  15. DIDACTIC PRINCIPLES AND PSYCHOLOGICAL CHARACTERISTICS IN DEFINITION OF QUALITY OF SOFTWARE TOOLS FOR EDUCATIONAL PURPOSE IN THE GENERAL EDUCATIONAL ENVIRONMENT OF UKRAINE

    Directory of Open Access Journals (Sweden)

    Maryna V. Pirko

    2011-02-01

    Full Text Available The fundamental feature of economy of postindustrial society is the knowledge that represents the basic source of competitive advantage. In the article the circle of didactic, psychological indicators in researches of problems of achievement of a high degree of quality of education and educational services is considered and described. The attention is paid to pedagogical requirements of the given period which are a standard substantiation in orientations for quality estimation of software tools for educational purpose of the general educational environment in Ukraine. The scheme of internal model of maintenance of quality of software tools for educational purpose is considered, the aspects integrated by internal model of quality of software for educational purpose are listed. The article describes the directions of researches in the conditions of formation of the global international educational environment and uniform information space of  education system taking into account the growth of availability of educational services. It is specified the main principles in the organization of pedagogical software tools.

  16. Metrics for energy resilience

    International Nuclear Information System (INIS)

    Roege, Paul E.; Collier, Zachary A.; Mancillas, James; McDonagh, John A.; Linkov, Igor

    2014-01-01

    Energy lies at the backbone of any advanced society and constitutes an essential prerequisite for economic growth, social order and national defense. However there is an Achilles heel to today's energy and technology relationship; namely a precarious intimacy between energy and the fiscal, social, and technical systems it supports. Recently, widespread and persistent disruptions in energy systems have highlighted the extent of this dependence and the vulnerability of increasingly optimized systems to changing conditions. Resilience is an emerging concept that offers to reconcile considerations of performance under dynamic environments and across multiple time frames by supplementing traditionally static system performance measures to consider behaviors under changing conditions and complex interactions among physical, information and human domains. This paper identifies metrics useful to implement guidance for energy-related planning, design, investment, and operation. Recommendations are presented using a matrix format to provide a structured and comprehensive framework of metrics relevant to a system's energy resilience. The study synthesizes previously proposed metrics and emergent resilience literature to provide a multi-dimensional model intended for use by leaders and practitioners as they transform our energy posture from one of stasis and reaction to one that is proactive and which fosters sustainable growth. - Highlights: • Resilience is the ability of a system to recover from adversity. • There is a need for methods to quantify and measure system resilience. • We developed a matrix-based approach to generate energy resilience metrics. • These metrics can be used in energy planning, system design, and operations

  17. Software Quality Assurance Metrics

    Science.gov (United States)

    McRae, Kalindra A.

    2004-01-01

    Software Quality Assurance (SQA) is a planned and systematic set of activities that ensures conformance of software life cycle processes and products conform to requirements, standards and procedures. In software development, software quality means meeting requirements and a degree of excellence and refinement of a project or product. Software Quality is a set of attributes of a software product by which its quality is described and evaluated. The set of attributes includes functionality, reliability, usability, efficiency, maintainability, and portability. Software Metrics help us understand the technical process that is used to develop a product. The process is measured to improve it and the product is measured to increase quality throughout the life cycle of software. Software Metrics are measurements of the quality of software. Software is measured to indicate the quality of the product, to assess the productivity of the people who produce the product, to assess the benefits derived from new software engineering methods and tools, to form a baseline for estimation, and to help justify requests for new tools or additional training. Any part of the software development can be measured. If Software Metrics are implemented in software development, it can save time, money, and allow the organization to identify the caused of defects which have the greatest effect on software development. The summer of 2004, I worked with Cynthia Calhoun and Frank Robinson in the Software Assurance/Risk Management department. My task was to research and collect, compile, and analyze SQA Metrics that have been used in other projects that are not currently being used by the SA team and report them to the Software Assurance team to see if any metrics can be implemented in their software assurance life cycle process.

  18. Using Publication Metrics to Highlight Academic Productivity and Research Impact

    Science.gov (United States)

    Carpenter, Christopher R.; Cone, David C.; Sarli, Cathy C.

    2016-01-01

    This article provides a broad overview of widely available measures of academic productivity and impact using publication data and highlights uses of these metrics for various purposes. Metrics based on publication data include measures such as number of publications, number of citations, the journal impact factor score, and the h-index, as well as emerging metrics based on document-level metrics. Publication metrics can be used for a variety of purposes for tenure and promotion, grant applications and renewal reports, benchmarking, recruiting efforts, and administrative purposes for departmental or university performance reports. The authors also highlight practical applications of measuring and reporting academic productivity and impact to emphasize and promote individual investigators, grant applications, or department output. PMID:25308141

  19. A bi-metric theory of gravitation

    International Nuclear Information System (INIS)

    Rosen, N.

    1975-01-01

    The bi-metric theory of gravitation proposed previously is simplified in that the auxiliary conditions are discarded, the two metric tensors being tied together only by means of the boundary conditions. Some of the properties of the field of a particle are investigated; there is no black hole, and it appears that no gravitational collapse can take place. Although the proposed theory and general relativity are at present observationally indistinguishable, some differences are pointed out which may some day be susceptible of observation. An alternative bi-metric theory is considered which gives for the precession of the perihelion 5/6 of the value given by general relativity; it seems less satisfactory than the present theory from the aesthetic point of view. (author)

  20. Conformal and related changes of metric on the product of two almost contact metric manifolds.

    OpenAIRE

    Blair, D. E.

    1990-01-01

    This paper studies conformal and related changes of the product metric on the product of two almost contact metric manifolds. It is shown that if one factor is Sasakian, the other is not, but that locally the second factor is of the type studied by Kenmotsu. The results are more general and given in terms of trans-Sasakian, α-Sasakian and β-Kenmotsu structures.

  1. Metrics for Business Process Models

    Science.gov (United States)

    Mendling, Jan

    Up until now, there has been little research on why people introduce errors in real-world business process models. In a more general context, Simon [404] points to the limitations of cognitive capabilities and concludes that humans act rationally only to a certain extent. Concerning modeling errors, this argument would imply that human modelers lose track of the interrelations of large and complex models due to their limited cognitive capabilities and introduce errors that they would not insert in a small model. A recent study by Mendling et al. [275] explores in how far certain complexity metrics of business process models have the potential to serve as error determinants. The authors conclude that complexity indeed appears to have an impact on error probability. Before we can test such a hypothesis in a more general setting, we have to establish an understanding of how we can define determinants that drive error probability and how we can measure them.

  2. Two-dimensional manifolds with metrics of revolution

    International Nuclear Information System (INIS)

    Sabitov, I Kh

    2000-01-01

    This is a study of the topological and metric structure of two-dimensional manifolds with a metric that is locally a metric of revolution. In the case of compact manifolds this problem can be thoroughly investigated, and in particular it is explained why there are no closed analytic surfaces of revolution in R 3 other than a sphere and a torus (moreover, in the smoothness class C ∞ such surfaces, understood in a certain generalized sense, exist in any topological class)

  3. Chaos of discrete dynamical systems in complete metric spaces

    International Nuclear Information System (INIS)

    Shi Yuming; Chen Guanrong

    2004-01-01

    This paper is concerned with chaos of discrete dynamical systems in complete metric spaces. Discrete dynamical systems governed by continuous maps in general complete metric spaces are first discussed, and two criteria of chaos are then established. As a special case, two corresponding criteria of chaos for discrete dynamical systems in compact subsets of metric spaces are obtained. These results have extended and improved the existing relevant results of chaos in finite-dimensional Euclidean spaces

  4. The time-resolved and extreme conditions XAS (TEXAS) facility at the European Synchrotron Radiation Facility: the general-purpose EXAFS bending-magnet beamline BM23.

    Science.gov (United States)

    Mathon, O; Beteva, A; Borrel, J; Bugnazet, D; Gatla, S; Hino, R; Kantor, I; Mairs, T; Munoz, M; Pasternak, S; Perrin, F; Pascarelli, S

    2015-11-01

    BM23 is the general-purpose EXAFS bending-magnet beamline at the ESRF, replacing the former BM29 beamline in the framework of the ESRF upgrade. Its mission is to serve the whole XAS user community by providing access to a basic service in addition to the many specialized instruments available at the ESRF. BM23 offers high signal-to-noise ratio EXAFS in a large energy range (5-75 keV), continuous energy scanning for quick-EXAFS on the second timescale and a micro-XAS station delivering a spot size of 4 µm × 4 µm FWHM. It is a user-friendly facility featuring a high degree of automation, online EXAFS data reduction and a flexible sample environment.

  5. The new versatile general purpose surface-muon instrument (GPS) based on silicon photomultipliers for μSR measurements on a continuous-wave beam.

    Science.gov (United States)

    Amato, A; Luetkens, H; Sedlak, K; Stoykov, A; Scheuermann, R; Elender, M; Raselli, A; Graf, D

    2017-09-01

    We report on the design and commissioning of a new spectrometer for muon-spin relaxation/rotation studies installed at the Swiss Muon Source (SμS) of the Paul Scherrer Institute (PSI, Switzerland). This new instrument is essentially a new design and replaces the old general-purpose surface-muon (GPS) instrument that has been for long the workhorse of the μSR user facility at PSI. By making use of muon and positron detectors made of plastic scintillators read out by silicon photomultipliers, a time resolution of the complete instrument of about 160 ps (standard deviation) could be achieved. In addition, the absence of light guides, which are needed in traditionally built μSR instrument to deliver the scintillation light to photomultiplier tubes located outside magnetic fields applied, allowed us to design a compact instrument with a detector set covering an increased solid angle compared with the old GPS.

  6. Enterprise Sustainment Metrics

    Science.gov (United States)

    2015-06-19

    are negatively impacting KPIs” (Parmenter, 2010: 31). In the current state, the Air Force’s AA and PBL metrics are once again split . AA does...must have the authority to “take immediate action to rectify situations that are negatively impacting KPIs” (Parmenter, 2010: 31). 3. Measuring...highest profitability and shareholder value for each company” (2014: 273). By systematically diagraming a process, either through a swim lane flowchart

  7. Optimization of GATE and PHITS Monte Carlo code parameters for uniform scanning proton beam based on simulation with FLUKA general-purpose code

    Energy Technology Data Exchange (ETDEWEB)

    Kurosu, Keita [Department of Medical Physics and Engineering, Osaka University Graduate School of Medicine, Suita, Osaka 565-0871 (Japan); Department of Radiation Oncology, Osaka University Graduate School of Medicine, Suita, Osaka 565-0871 (Japan); Takashina, Masaaki; Koizumi, Masahiko [Department of Medical Physics and Engineering, Osaka University Graduate School of Medicine, Suita, Osaka 565-0871 (Japan); Das, Indra J. [Department of Radiation Oncology, Indiana University School of Medicine, Indianapolis, IN 46202 (United States); Moskvin, Vadim P., E-mail: vadim.p.moskvin@gmail.com [Department of Radiation Oncology, Indiana University School of Medicine, Indianapolis, IN 46202 (United States)

    2014-10-01

    Although three general-purpose Monte Carlo (MC) simulation tools: Geant4, FLUKA and PHITS have been used extensively, differences in calculation results have been reported. The major causes are the implementation of the physical model, preset value of the ionization potential or definition of the maximum step size. In order to achieve artifact free MC simulation, an optimized parameters list for each simulation system is required. Several authors have already proposed the optimized lists, but those studies were performed with a simple system such as only a water phantom. Since particle beams have a transport, interaction and electromagnetic processes during beam delivery, establishment of an optimized parameters-list for whole beam delivery system is therefore of major importance. The purpose of this study was to determine the optimized parameters list for GATE and PHITS using proton treatment nozzle computational model. The simulation was performed with the broad scanning proton beam. The influences of the customizing parameters on the percentage depth dose (PDD) profile and the proton range were investigated by comparison with the result of FLUKA, and then the optimal parameters were determined. The PDD profile and the proton range obtained from our optimized parameters list showed different characteristics from the results obtained with simple system. This led to the conclusion that the physical model, particle transport mechanics and different geometry-based descriptions need accurate customization in planning computational experiments for artifact-free MC simulation.

  8. Optimization of GATE and PHITS Monte Carlo code parameters for uniform scanning proton beam based on simulation with FLUKA general-purpose code

    International Nuclear Information System (INIS)

    Kurosu, Keita; Takashina, Masaaki; Koizumi, Masahiko; Das, Indra J.; Moskvin, Vadim P.

    2014-01-01

    Although three general-purpose Monte Carlo (MC) simulation tools: Geant4, FLUKA and PHITS have been used extensively, differences in calculation results have been reported. The major causes are the implementation of the physical model, preset value of the ionization potential or definition of the maximum step size. In order to achieve artifact free MC simulation, an optimized parameters list for each simulation system is required. Several authors have already proposed the optimized lists, but those studies were performed with a simple system such as only a water phantom. Since particle beams have a transport, interaction and electromagnetic processes during beam delivery, establishment of an optimized parameters-list for whole beam delivery system is therefore of major importance. The purpose of this study was to determine the optimized parameters list for GATE and PHITS using proton treatment nozzle computational model. The simulation was performed with the broad scanning proton beam. The influences of the customizing parameters on the percentage depth dose (PDD) profile and the proton range were investigated by comparison with the result of FLUKA, and then the optimal parameters were determined. The PDD profile and the proton range obtained from our optimized parameters list showed different characteristics from the results obtained with simple system. This led to the conclusion that the physical model, particle transport mechanics and different geometry-based descriptions need accurate customization in planning computational experiments for artifact-free MC simulation

  9. Quantitative properties of the Schwarzschild metric

    Czech Academy of Sciences Publication Activity Database

    Křížek, Michal; Křížek, Filip

    2018-01-01

    Roč. 2018, č. 1 (2018), s. 1-10 Institutional support: RVO:67985840 Keywords : exterior and interior Schwarzschild metric * proper radius * coordinate radius Subject RIV: BA - General Mathematics OBOR OECD: Applied mathematics http://astro.shu-bg.net/pasb/index_files/Papers/2018/SCHWARZ8.pdf

  10. A Lagrangian-dependent metric space

    International Nuclear Information System (INIS)

    El-Tahir, A.

    1989-08-01

    A generalized Lagrangian-dependent metric of the static isotropic spacetime is derived. Its behaviour should be governed by imposing physical constraints allowing to avert the pathological features of gravity at the strong field domain. This would restrict the choice of the Lagrangian form. (author). 10 refs

  11. Invariance group of the Finster metric function

    International Nuclear Information System (INIS)

    Asanov, G.S.

    1985-01-01

    An invariance group of the Finsler metric function is introduced and studied that directly generalized the respective concept (a group of Euclidean rolations) of the Rieman geometry. A sequential description of the isotopic invariance of physical fields on the base of the Finsler geometry is possible in terms of this group

  12. Kerr metric in cosmological background

    Energy Technology Data Exchange (ETDEWEB)

    Vaidya, P C [Gujarat Univ., Ahmedabad (India). Dept. of Mathematics

    1977-06-01

    A metric satisfying Einstein's equation is given which in the vicinity of the source reduces to the well-known Kerr metric and which at large distances reduces to the Robertson-Walker metric of a nomogeneous cosmological model. The radius of the event horizon of the Kerr black hole in the cosmological background is found out.

  13. 10 CFR 600.306 - Metric system of measurement.

    Science.gov (United States)

    2010-01-01

    ... cause significant inefficiencies or loss of markets to United States firms. (b) Recipients are... Requirements for Grants and Cooperative Agreements With For-Profit Organizations General § 600.306 Metric... Competitiveness Act of 1988 (15 U.S.C. 205) and implemented by Executive Order 12770, states that: (1) The metric...

  14. On the L2-metric of vortex moduli spaces

    NARCIS (Netherlands)

    Baptista, J.M.

    2011-01-01

    We derive general expressions for the Kähler form of the L2-metric in terms of standard 2-forms on vortex moduli spaces. In the case of abelian vortices in gauged linear sigma-models, this allows us to compute explicitly the Kähler class of the L2-metric. As an application we compute the total

  15. Radiating c metric: an example of a proper Ricci Collineation

    International Nuclear Information System (INIS)

    Aulestia, L.; Nunez, L.; Patino, A.; Rago, H.; Herrera, L.

    1984-01-01

    A generalization of the charged c metric to the nonstationary case is given. The possibility of associating the energy-momentum tensor with the electromagnetic or neutrino field is discussed. It is shown that, for a specific choice of the time-dependent parameters, the metric admits at least a two-parameter group of proper Ricci collineations

  16. Social Media Metrics Importance and Usage Frequency in Latvia

    OpenAIRE

    Ronalds Skulme

    2017-01-01

    Purpose of the article: The purpose of this paper was to explore which social media marketing metrics are most often used and are most important for marketing experts in Latvia and can be used to evaluate marketing campaign effectiveness. Methodology/methods: In order to achieve the aim of this paper several theoretical and practical research methods were used, such as theoretical literature analysis, surveying and grouping. First of all, theoretical research about social media metrics was...

  17. SOCIAL METRICS APPLIED TO SMART TOURISM

    Directory of Open Access Journals (Sweden)

    O. Cervantes

    2016-09-01

    Full Text Available We present a strategy to make productive use of semantically-related social data, from a user-centered semantic network, in order to help users (tourists and citizens in general to discover cultural heritage, points of interest and available services in a smart city. This data can be used to personalize recommendations in a smart tourism application. Our approach is based on flow centrality metrics typically used in social network analysis: flow betweenness, flow closeness and eccentricity. These metrics are useful to discover relevant nodes within the network yielding nodes that can be interpreted as suggestions (venues or services to users. We describe the semantic network built on graph model, as well as social metrics algorithms used to produce recommendations. We also present challenges and results from a prototypical implementation applied to the case study of the City of Puebla, Mexico.

  18. Social Metrics Applied to Smart Tourism

    Science.gov (United States)

    Cervantes, O.; Gutiérrez, E.; Gutiérrez, F.; Sánchez, J. A.

    2016-09-01

    We present a strategy to make productive use of semantically-related social data, from a user-centered semantic network, in order to help users (tourists and citizens in general) to discover cultural heritage, points of interest and available services in a smart city. This data can be used to personalize recommendations in a smart tourism application. Our approach is based on flow centrality metrics typically used in social network analysis: flow betweenness, flow closeness and eccentricity. These metrics are useful to discover relevant nodes within the network yielding nodes that can be interpreted as suggestions (venues or services) to users. We describe the semantic network built on graph model, as well as social metrics algorithms used to produce recommendations. We also present challenges and results from a prototypical implementation applied to the case study of the City of Puebla, Mexico.

  19. Metric Learning for Hyperspectral Image Segmentation

    Science.gov (United States)

    Bue, Brian D.; Thompson, David R.; Gilmore, Martha S.; Castano, Rebecca

    2011-01-01

    We present a metric learning approach to improve the performance of unsupervised hyperspectral image segmentation. Unsupervised spatial segmentation can assist both user visualization and automatic recognition of surface features. Analysts can use spatially-continuous segments to decrease noise levels and/or localize feature boundaries. However, existing segmentation methods use tasks-agnostic measures of similarity. Here we learn task-specific similarity measures from training data, improving segment fidelity to classes of interest. Multiclass Linear Discriminate Analysis produces a linear transform that optimally separates a labeled set of training classes. The defines a distance metric that generalized to a new scenes, enabling graph-based segmentation that emphasizes key spectral features. We describe tests based on data from the Compact Reconnaissance Imaging Spectrometer (CRISM) in which learned metrics improve segment homogeneity with respect to mineralogical classes.

  20. Performance metrics for the assessment of satellite data products: an ocean color case study

    Science.gov (United States)

    Performance assessment of ocean color satellite data has generally relied on statistical metrics chosen for their common usage and the rationale for selecting certain metrics is infrequently explained. Commonly reported statistics based on mean squared errors, such as the coeffic...

  1. Evaluation of general-purpose collimators against high-resolution collimators with resolution recovery with a view to reducing radiation dose in myocardial perfusion SPECT: A preliminary phantom study.

    Science.gov (United States)

    Armstrong, Ian S; Saint, Kimberley J; Tonge, Christine M; Arumugam, Parthiban

    2017-04-01

    There is a growing focus on reducing radiation dose to patients undergoing myocardial perfusion imaging. This preliminary phantom study aims to evaluate the use of general-purpose collimators with resolution recovery (RR) to allow a reduction in patient radiation dose. Images of a cardiac torso phantom with inferior and anterior wall defects were acquired on a GE Infinia and Siemens Symbia T6 using both high-resolution and general-purpose collimators. Imaging time, a surrogate for administered activity, was reduced between 35% and 40% with general-purpose collimators to match the counts acquired with high-resolution collimators. Images were reconstructed with RR with and without attenuation correction. Two pixel sizes were also investigated. Defect contrast was measured. Defect contrast on general-purpose images was superior or comparable to the high-resolution collimators on both systems despite the reduced imaging time. Infinia general-purpose images required a smaller pixel size to be used to maintain defect contrast, while Symbia T6 general-purpose images did not require a change in pixel size to that used for standard myocardial perfusion SPECT. This study suggests that general-purpose collimators with RR offer a potential for substantial dose reductions while providing similar or better image quality to images acquired using high-resolution collimators.

  2. Adapting machine learning techniques to censored time-to-event health record data: A general-purpose approach using inverse probability of censoring weighting.

    Science.gov (United States)

    Vock, David M; Wolfson, Julian; Bandyopadhyay, Sunayan; Adomavicius, Gediminas; Johnson, Paul E; Vazquez-Benitez, Gabriela; O'Connor, Patrick J

    2016-06-01

    Models for predicting the probability of experiencing various health outcomes or adverse events over a certain time frame (e.g., having a heart attack in the next 5years) based on individual patient characteristics are important tools for managing patient care. Electronic health data (EHD) are appealing sources of training data because they provide access to large amounts of rich individual-level data from present-day patient populations. However, because EHD are derived by extracting information from administrative and clinical databases, some fraction of subjects will not be under observation for the entire time frame over which one wants to make predictions; this loss to follow-up is often due to disenrollment from the health system. For subjects without complete follow-up, whether or not they experienced the adverse event is unknown, and in statistical terms the event time is said to be right-censored. Most machine learning approaches to the problem have been relatively ad hoc; for example, common approaches for handling observations in which the event status is unknown include (1) discarding those observations, (2) treating them as non-events, (3) splitting those observations into two observations: one where the event occurs and one where the event does not. In this paper, we present a general-purpose approach to account for right-censored outcomes using inverse probability of censoring weighting (IPCW). We illustrate how IPCW can easily be incorporated into a number of existing machine learning algorithms used to mine big health care data including Bayesian networks, k-nearest neighbors, decision trees, and generalized additive models. We then show that our approach leads to better calibrated predictions than the three ad hoc approaches when applied to predicting the 5-year risk of experiencing a cardiovascular adverse event, using EHD from a large U.S. Midwestern healthcare system. Copyright © 2016 Elsevier Inc. All rights reserved.

  3. ProtDCal: A program to compute general-purpose-numerical descriptors for sequences and 3D-structures of proteins.

    Science.gov (United States)

    Ruiz-Blanco, Yasser B; Paz, Waldo; Green, James; Marrero-Ponce, Yovani

    2015-05-16

    software is intended to provide a useful tool for general-purpose encoding of protein sequences and structures for applications is protein classification, similarity analyses and function prediction.

  4. Real-Time and Real-Fast Performance of General-Purpose and Real-Time Operating Systems in Multithreaded Physical Simulation of Complex Mechanical Systems

    Directory of Open Access Journals (Sweden)

    Carlos Garre

    2014-01-01

    Full Text Available Physical simulation is a valuable tool in many fields of engineering for the tasks of design, prototyping, and testing. General-purpose operating systems (GPOS are designed for real-fast tasks, such as offline simulation of complex physical models that should finish as soon as possible. Interfacing hardware at a given rate (as in a hardware-in-the-loop test requires instead maximizing time determinism, for which real-time operating systems (RTOS are designed. In this paper, real-fast and real-time performance of RTOS and GPOS are compared when simulating models of high complexity with large time steps. This type of applications is usually present in the automotive industry and requires a good trade-off between real-fast and real-time performance. The performance of an RTOS and a GPOS is compared by running a tire model scalable on the number of degrees-of-freedom and parallel threads. The benchmark shows that the GPOS present better performance in real-fast runs but worse in real-time due to nonexplicit task switches and to the latency associated with interprocess communication (IPC and task switch.

  5. Towards anatomic scale agent-based modeling with a massively parallel spatially explicit general-purpose model of enteric tissue (SEGMEnT_HPC).

    Science.gov (United States)

    Cockrell, Robert Chase; Christley, Scott; Chang, Eugene; An, Gary

    2015-01-01

    Perhaps the greatest challenge currently facing the biomedical research community is the ability to integrate highly detailed cellular and molecular mechanisms to represent clinical disease states as a pathway to engineer effective therapeutics. This is particularly evident in the representation of organ-level pathophysiology in terms of abnormal tissue structure, which, through histology, remains a mainstay in disease diagnosis and staging. As such, being able to generate anatomic scale simulations is a highly desirable goal. While computational limitations have previously constrained the size and scope of multi-scale computational models, advances in the capacity and availability of high-performance computing (HPC) resources have greatly expanded the ability of computational models of biological systems to achieve anatomic, clinically relevant scale. Diseases of the intestinal tract are exemplary examples of pathophysiological processes that manifest at multiple scales of spatial resolution, with structural abnormalities present at the microscopic, macroscopic and organ-levels. In this paper, we describe a novel, massively parallel computational model of the gut, the Spatially Explicitly General-purpose Model of Enteric Tissue_HPC (SEGMEnT_HPC), which extends an existing model of the gut epithelium, SEGMEnT, in order to create cell-for-cell anatomic scale simulations. We present an example implementation of SEGMEnT_HPC that simulates the pathogenesis of ileal pouchitis, and important clinical entity that affects patients following remedial surgery for ulcerative colitis.

  6. Improved detection of sentinel lymph nodes in SPECT/CT images acquired using a low- to medium-energy general-purpose collimator.

    Science.gov (United States)

    Yoneyama, Hiroto; Tsushima, Hiroyuki; Kobayashi, Masato; Onoguchi, Masahisa; Nakajima, Kenichi; Kinuya, Seigo

    2014-01-01

    The use of the low-energy high-resolution (LEHR) collimator for lymphoscintigraphy causes the appearance of star-shaped artifacts at injection sites. The aim of this study was to confirm whether the lower resolution of the low- to medium-energy general-purpose (LMEGP) collimator is compensated by decrease in the degree of septal penetration and the reduction in star-shaped artifacts. A total of 106 female patients with breast cancer, diagnosed by biopsy, were enrolled in this study. Tc phytate (37 MBq, 1 mCi) was injected around the tumor, and planar and SPECT/CT images were obtained after 3 to 4 hours. When sentinel lymph nodes (SLNs) could not be identified from planar and SPECT/CT images by using the LEHR collimator, we repeated the study with the LMEGP collimator. Planar imaging performed using the LEHR and LEHR + LMEGP collimators positively identified SLNs in 96.2% (102/106) and 99.1% (105/106) of the patients, respectively. Using combination of planar and SPECT/CT imaging with the LEHR and LEHR + LMEGP collimators, SLNs were positively identified in 97.2% (103/106) and 100% (106/106) of the patients, respectively. The LMEGP collimator provided better results than the LEHR collimator because of the lower degree of septal penetration. The use of the LMEGP collimator improved SLN detection.

  7. On the (1,1)-tensor bundle with Cheeger–Gromoll type metric

    Indian Academy of Sciences (India)

    The main purpose of the present paper is to construct Riemannian almost product structures on the (1, 1)-tensor bundle equipped with Cheeger–Gromoll type metric over a Riemannian manifold and present some results concerning these structures. Keywords. Almost product structure; Cheeger–Gromoll type metric; metric ...

  8. Completion of a Dislocated Metric Space

    Directory of Open Access Journals (Sweden)

    P. Sumati Kumari

    2015-01-01

    Full Text Available We provide a construction for the completion of a dislocated metric space (abbreviated d-metric space; we also prove that the completion of the metric associated with a d-metric coincides with the metric associated with the completion of the d-metric.

  9. Metric adjusted skew information

    DEFF Research Database (Denmark)

    Hansen, Frank

    2008-01-01

    ) that vanishes for observables commuting with the state. We show that the skew information is a convex function on the manifold of states. It also satisfies other requirements, proposed by Wigner and Yanase, for an effective measure-of-information content of a state relative to a conserved observable. We...... establish a connection between the geometrical formulation of quantum statistics as proposed by Chentsov and Morozova and measures of quantum information as introduced by Wigner and Yanase and extended in this article. We show that the set of normalized Morozova-Chentsov functions describing the possible......We extend the concept of Wigner-Yanase-Dyson skew information to something we call "metric adjusted skew information" (of a state with respect to a conserved observable). This "skew information" is intended to be a non-negative quantity bounded by the variance (of an observable in a state...

  10. New fixed and periodic point results on cone metric spaces

    Directory of Open Access Journals (Sweden)

    Ghasem Soleimani Rad

    2014-05-01

    Full Text Available In this paper, several xed point theorems for T-contraction of two maps on cone metric spaces under normality condition are proved. Obtained results extend and generalize well-known comparable results in the literature.

  11. An inheritance complexity metric for object-oriented code: A ...

    Indian Academy of Sciences (India)

    Department of Computer Engineering, Atilim University, 06836, Ankara, Turkey ... applied our metric on a real project for empirical validation and compared it with ... being insufficiently generalized or too implementation technology dependent.

  12. IBM Demonstrates a General-Purpose, High-Performance, High-Availability Cloud-Hosted Data Distribution System With Live GOES-16 Weather Satellite Data

    Science.gov (United States)

    Snyder, P. L.; Brown, V. W.

    2017-12-01

    IBM has created a general purpose, data-agnostic solution that provides high performance, low data latency, high availability, scalability, and persistent access to the captured data, regardless of source or type. This capability is hosted on commercially available cloud environments and uses much faster, more efficient, reliable, and secure data transfer protocols than the more typically used FTP. The design incorporates completely redundant data paths at every level, including at the cloud data center level, in order to provide the highest assurance of data availability to the data consumers. IBM has been successful in building and testing a Proof of Concept instance on our IBM Cloud platform to receive and disseminate actual GOES-16 data as it is being downlinked. This solution leverages the inherent benefits of a cloud infrastructure configured and tuned for continuous, stable, high-speed data dissemination to data consumers worldwide at the downlink rate. It also is designed to ingest data from multiple simultaneous sources and disseminate data to multiple consumers. Nearly linear scalability is achieved by adding servers and storage.The IBM Proof of Concept system has been tested with our partners to achieve in excess of 5 Gigabits/second over public internet infrastructure. In tests with live GOES-16 data, the system routinely achieved 2.5 Gigabits/second pass-through to The Weather Company from the University of Wisconsin-Madison SSEC. Simulated data was also transferred from the Cooperative Institute for Climate and Satellites — North Carolina to The Weather Company, as well. The storage node allocated to our Proof of Concept system as tested was sized at 480 Terabytes of RAID protected disk as a worst case sizing to accommodate the data from four GOES-16 class satellites for 30 days in a circular buffer. This shows that an abundance of performance and capacity headroom exists in the IBM design that can be applied to additional missions.

  13. Assessing Software Quality Through Visualised Cohesion Metrics

    Directory of Open Access Journals (Sweden)

    Timothy Shih

    2001-05-01

    Full Text Available Cohesion is one of the most important factors for software quality as well as maintainability, reliability and reusability. Module cohesion is defined as a quality attribute that seeks for measuring the singleness of the purpose of a module. The module of poor quality can be a serious obstacle to the system quality. In order to design a good software quality, software managers and engineers need to introduce cohesion metrics to measure and produce desirable software. A highly cohesion software is thought to be a desirable constructing. In this paper, we propose a function-oriented cohesion metrics based on the analysis of live variables, live span and the visualization of processing element dependency graph. We give six typical cohesion examples to be measured as our experiments and justification. Therefore, a well-defined, well-normalized, well-visualized and well-experimented cohesion metrics is proposed to indicate and thus enhance software cohesion strength. Furthermore, this cohesion metrics can be easily incorporated with software CASE tool to help software engineers to improve software quality.

  14. GPScheDVS: A New Paradigm of the Autonomous CPU Speed Control for Commodity-OS-based General-Purpose Mobile Computers with a DVS-friendly Task Scheduling

    OpenAIRE

    Kim, Sookyoung

    2008-01-01

    This dissertation studies the problem of increasing battery life-time and reducing CPU heat dissipation without degrading system performance in commodity-OS-based general-purpose (GP) mobile computers using the dynamic voltage scaling (DVS) function of modern CPUs. The dissertation especially focuses on the impact of task scheduling on the effectiveness of DVS in achieving this goal. The task scheduling mechanism used in most contemporary general-purpose operating systems (GPOS) prioritizes t...

  15. The metric system: An introduction

    Energy Technology Data Exchange (ETDEWEB)

    Lumley, S.M.

    1995-05-01

    On July 13, 1992, Deputy Director Duane Sewell restated the Laboratory`s policy on conversion to the metric system which was established in 1974. Sewell`s memo announced the Laboratory`s intention to continue metric conversion on a reasonable and cost effective basis. Copies of the 1974 and 1992 Administrative Memos are contained in the Appendix. There are three primary reasons behind the Laboratory`s conversion to the metric system. First, Public Law 100-418, passed in 1988, states that by the end of fiscal year 1992 the Federal Government must begin using metric units in grants, procurements, and other business transactions. Second, on July 25, 1991, President George Bush signed Executive Order 12770 which urged Federal agencies to expedite conversion to metric units. Third, the contract between the University of California and the Department of Energy calls for the Laboratory to convert to the metric system. Thus, conversion to the metric system is a legal requirement and a contractual mandate with the University of California. Public Law 100-418 and Executive Order 12770 are discussed in more detail later in this section, but first they examine the reasons behind the nation`s conversion to the metric system. The second part of this report is on applying the metric system.

  16. Attack-Resistant Trust Metrics

    Science.gov (United States)

    Levien, Raph

    The Internet is an amazingly powerful tool for connecting people together, unmatched in human history. Yet, with that power comes great potential for spam and abuse. Trust metrics are an attempt to compute the set of which people are trustworthy and which are likely attackers. This chapter presents two specific trust metrics developed and deployed on the Advogato Website, which is a community blog for free software developers. This real-world experience demonstrates that the trust metrics fulfilled their goals, but that for good results, it is important to match the assumptions of the abstract trust metric computation to the real-world implementation.

  17. The metric system: An introduction

    Science.gov (United States)

    Lumley, Susan M.

    On 13 Jul. 1992, Deputy Director Duane Sewell restated the Laboratory's policy on conversion to the metric system which was established in 1974. Sewell's memo announced the Laboratory's intention to continue metric conversion on a reasonable and cost effective basis. Copies of the 1974 and 1992 Administrative Memos are contained in the Appendix. There are three primary reasons behind the Laboratory's conversion to the metric system. First, Public Law 100-418, passed in 1988, states that by the end of fiscal year 1992 the Federal Government must begin using metric units in grants, procurements, and other business transactions. Second, on 25 Jul. 1991, President George Bush signed Executive Order 12770 which urged Federal agencies to expedite conversion to metric units. Third, the contract between the University of California and the Department of Energy calls for the Laboratory to convert to the metric system. Thus, conversion to the metric system is a legal requirement and a contractual mandate with the University of California. Public Law 100-418 and Executive Order 12770 are discussed in more detail later in this section, but first they examine the reasons behind the nation's conversion to the metric system. The second part of this report is on applying the metric system.

  18. Two classes of metric spaces

    Directory of Open Access Journals (Sweden)

    Isabel Garrido

    2016-04-01

    Full Text Available The class of metric spaces (X,d known as small-determined spaces, introduced by Garrido and Jaramillo, are properly defined by means of some type of real-valued Lipschitz functions on X. On the other hand, B-simple metric spaces introduced by Hejcman are defined in terms of some kind of bornologies of bounded subsets of X. In this note we present a common framework where both classes of metric spaces can be studied which allows us to see not only the relationships between them but also to obtain new internal characterizations of these metric properties.

  19. Metrical results on systems of small linear forms

    DEFF Research Database (Denmark)

    Hussain, M.; Kristensen, Simon

    In this paper the metric theory of Diophantine approximation associated with the small linear forms is investigated. Khintchine--Groshev theorems are established along with Hausdorff measure generalization without the monotonic assumption on the approximating function.......In this paper the metric theory of Diophantine approximation associated with the small linear forms is investigated. Khintchine--Groshev theorems are established along with Hausdorff measure generalization without the monotonic assumption on the approximating function....

  20. Second order elastic metrics on the shape space of curves

    DEFF Research Database (Denmark)

    Bauer, Martin; Bruveris, Martins; Harms, Philipp

    2015-01-01

    Second order Sobolev metrics on the space of regular unparametrized planar curves have several desirable completeness properties not present in lower order metrics, but numerics are still largely missing. In this paper, we present algorithms to numerically solve the initial and boundary value......, due to its generality, it could be applied to more general spaces of mapping. We demonstrate the effectiveness of our approach by analyzing a collection of shapes representing physical objects....

  1. Software metrics: Software quality metrics for distributed systems. [reliability engineering

    Science.gov (United States)

    Post, J. V.

    1981-01-01

    Software quality metrics was extended to cover distributed computer systems. Emphasis is placed on studying embedded computer systems and on viewing them within a system life cycle. The hierarchy of quality factors, criteria, and metrics was maintained. New software quality factors were added, including survivability, expandability, and evolvability.

  2. Interiors of Vaidya's radiating metric: Gravitational collapse

    International Nuclear Information System (INIS)

    Fayos, F.; Jaen, X.; Llanta, E.; Senovilla, J.M.M.

    1992-01-01

    Using the Darmois junction conditions, we give the necessary and sufficient conditions for the matching of a general spherically symmetric metric to a Vaidya radiating solution. We present also these conditions in terms of the physical quantities of the corresponding energy-momentum tensors. The physical interpretation of the results and their possible applications are studied, and we also perform a detailed analysis of previous work on the subject by other authors

  3. Comparative Study of Trace Metrics between Bibliometrics and Patentometrics

    Directory of Open Access Journals (Sweden)

    Fred Y. Ye

    2016-06-01

    Full Text Available Purpose: To comprehensively evaluate the overall performance of a group or an individual in both bibliometrics and patentometrics. Design/methodology/approach: Trace metrics were applied to the top 30 universities in the 2014 Academic Ranking of World Universities (ARWU — computer sciences, the top 30 ESI highly cited papers in the computer sciences field in 2014, as well as the top 30 assignees and the top 30 most cited patents in the National Bureau of Economic Research (NBER computer hardware and software category. Findings: We found that, by applying trace metrics, the research or marketing impact efficiency, at both group and individual levels, was clearly observed. Furthermore, trace metrics were more sensitive to the different publication-citation distributions than the average citation and h-index were. Research limitations: Trace metrics considered publications with zero citations as negative contributions. One should clarify how he/she evaluates a zero-citation paper or patent before applying trace metrics. Practical implications: Decision makers could regularly examinine the performance of their university/company by applying trace metrics and adjust their policies accordingly. Originality/value: Trace metrics could be applied both in bibliometrics and patentometrics and provide a comprehensive view. Moreover, the high sensitivity and unique impact efficiency view provided by trace metrics can facilitate decision makers in examining and adjusting their policies.

  4. SU-E-T-254: Optimization of GATE and PHITS Monte Carlo Code Parameters for Uniform Scanning Proton Beam Based On Simulation with FLUKA General-Purpose Code

    Energy Technology Data Exchange (ETDEWEB)

    Kurosu, K [Department of Radiation Oncology, Osaka University Graduate School of Medicine, Osaka (Japan); Department of Medical Physics ' Engineering, Osaka University Graduate School of Medicine, Osaka (Japan); Takashina, M; Koizumi, M [Department of Medical Physics ' Engineering, Osaka University Graduate School of Medicine, Osaka (Japan); Das, I; Moskvin, V [Department of Radiation Oncology, Indiana University School of Medicine, Indianapolis, IN (United States)

    2014-06-01

    Purpose: Monte Carlo codes are becoming important tools for proton beam dosimetry. However, the relationships between the customizing parameters and percentage depth dose (PDD) of GATE and PHITS codes have not been reported which are studied for PDD and proton range compared to the FLUKA code and the experimental data. Methods: The beam delivery system of the Indiana University Health Proton Therapy Center was modeled for the uniform scanning beam in FLUKA and transferred identically into GATE and PHITS. This computational model was built from the blue print and validated with the commissioning data. Three parameters evaluated are the maximum step size, cut off energy and physical and transport model. The dependence of the PDDs on the customizing parameters was compared with the published results of previous studies. Results: The optimal parameters for the simulation of the whole beam delivery system were defined by referring to the calculation results obtained with each parameter. Although the PDDs from FLUKA and the experimental data show a good agreement, those of GATE and PHITS obtained with our optimal parameters show a minor discrepancy. The measured proton range R90 was 269.37 mm, compared to the calculated range of 269.63 mm, 268.96 mm, and 270.85 mm with FLUKA, GATE and PHITS, respectively. Conclusion: We evaluated the dependence of the results for PDDs obtained with GATE and PHITS Monte Carlo generalpurpose codes on the customizing parameters by using the whole computational model of the treatment nozzle. The optimal parameters for the simulation were then defined by referring to the calculation results. The physical model, particle transport mechanics and the different geometrybased descriptions need accurate customization in three simulation codes to agree with experimental data for artifact-free Monte Carlo simulation. This study was supported by Grants-in Aid for Cancer Research (H22-3rd Term Cancer Control-General-043) from the Ministry of Health

  5. Some Extensions of Banach's Contraction Principle in Complete Cone Metric Spaces

    Directory of Open Access Journals (Sweden)

    Raja P

    2008-01-01

    Full Text Available Abstract In this paper we consider complete cone metric spaces. We generalize some definitions such as -nonexpansive and -uniformly locally contractive functions -closure, -isometric in cone metric spaces, and certain fixed point theorems will be proved in those spaces. Among other results, we prove some interesting applications for the fixed point theorems in cone metric spaces.

  6. Fixed Points of α-Admissible Mappings in Cone Metric Spaces with Banach Algebra

    Directory of Open Access Journals (Sweden)

    S.K. Malhotra

    2015-11-01

    Full Text Available In this paper, we introduce the $\\alpha$-admissible mappings in the setting of cone metric spaces equipped with Banach algebra and solid cones. Our results generalize and extend several known results of metric and cone metric spaces. An example is presented which illustrates and shows the significance of results proved herein.

  7. Multimetric indices: How many metrics?

    Science.gov (United States)

    Multimetric indices (MMI’s) often include 5 to 15 metrics, each representing a different attribute of assemblage condition, such as species diversity, tolerant taxa, and nonnative taxa. Is there an optimal number of metrics for MMIs? To explore this question, I created 1000 9-met...

  8. Metrical Phonology: German Sound System.

    Science.gov (United States)

    Tice, Bradley S.

    Metrical phonology, a linguistic process of phonological stress assessment and diagrammatic simplification of sentence and word stress, is discussed as it is found in the English and German languages. The objective is to promote use of metrical phonology as a tool for enhancing instruction in stress patterns in words and sentences, particularly in…

  9. Extending cosmology: the metric approach

    OpenAIRE

    Mendoza, S.

    2012-01-01

    Comment: 2012, Extending Cosmology: The Metric Approach, Open Questions in Cosmology; Review article for an Intech "Open questions in cosmology" book chapter (19 pages, 3 figures). Available from: http://www.intechopen.com/books/open-questions-in-cosmology/extending-cosmology-the-metric-approach

  10. Numerical Calabi-Yau metrics

    International Nuclear Information System (INIS)

    Douglas, Michael R.; Karp, Robert L.; Lukic, Sergio; Reinbacher, Rene

    2008-01-01

    We develop numerical methods for approximating Ricci flat metrics on Calabi-Yau hypersurfaces in projective spaces. Our approach is based on finding balanced metrics and builds on recent theoretical work by Donaldson. We illustrate our methods in detail for a one parameter family of quintics. We also suggest several ways to extend our results

  11. High resolution metric imaging payload

    Science.gov (United States)

    Delclaud, Y.

    2017-11-01

    Alcatel Space Industries has become Europe's leader in the field of high and very high resolution optical payloads, in the frame work of earth observation system able to provide military government with metric images from space. This leadership allowed ALCATEL to propose for the export market, within a French collaboration frame, a complete space based system for metric observation.

  12. Weyl metrics and wormholes

    Energy Technology Data Exchange (ETDEWEB)

    Gibbons, Gary W. [DAMTP, University of Cambridge, Wilberforce Road, Cambridge, CB3 0WA U.K. (United Kingdom); Volkov, Mikhail S., E-mail: gwg1@cam.ac.uk, E-mail: volkov@lmpt.univ-tours.fr [Laboratoire de Mathématiques et Physique Théorique, LMPT CNRS—UMR 7350, Université de Tours, Parc de Grandmont, Tours, 37200 France (France)

    2017-05-01

    We study solutions obtained via applying dualities and complexifications to the vacuum Weyl metrics generated by massive rods and by point masses. Rescaling them and extending to complex parameter values yields axially symmetric vacuum solutions containing singularities along circles that can be viewed as singular matter sources. These solutions have wormhole topology with several asymptotic regions interconnected by throats and their sources can be viewed as thin rings of negative tension encircling the throats. For a particular value of the ring tension the geometry becomes exactly flat although the topology remains non-trivial, so that the rings literally produce holes in flat space. To create a single ring wormhole of one metre radius one needs a negative energy equivalent to the mass of Jupiter. Further duality transformations dress the rings with the scalar field, either conventional or phantom. This gives rise to large classes of static, axially symmetric solutions, presumably including all previously known solutions for a gravity-coupled massless scalar field, as for example the spherically symmetric Bronnikov-Ellis wormholes with phantom scalar. The multi-wormholes contain infinite struts everywhere at the symmetry axes, apart from solutions with locally flat geometry.

  13. Metrics for image segmentation

    Science.gov (United States)

    Rees, Gareth; Greenway, Phil; Morray, Denise

    1998-07-01

    An important challenge in mapping image-processing techniques onto applications is the lack of quantitative performance measures. From a systems engineering perspective these are essential if system level requirements are to be decomposed into sub-system requirements which can be understood in terms of algorithm selection and performance optimization. Nowhere in computer vision is this more evident than in the area of image segmentation. This is a vigorous and innovative research activity, but even after nearly two decades of progress, it remains almost impossible to answer the question 'what would the performance of this segmentation algorithm be under these new conditions?' To begin to address this shortcoming, we have devised a well-principled metric for assessing the relative performance of two segmentation algorithms. This allows meaningful objective comparisons to be made between their outputs. It also estimates the absolute performance of an algorithm given ground truth. Our approach is an information theoretic one. In this paper, we describe the theory and motivation of our method, and present practical results obtained from a range of state of the art segmentation methods. We demonstrate that it is possible to measure the objective performance of these algorithms, and to use the information so gained to provide clues about how their performance might be improved.

  14. Developing a Security Metrics Scorecard for Healthcare Organizations.

    Science.gov (United States)

    Elrefaey, Heba; Borycki, Elizabeth; Kushniruk, Andrea

    2015-01-01

    In healthcare, information security is a key aspect of protecting a patient's privacy and ensuring systems availability to support patient care. Security managers need to measure the performance of security systems and this can be achieved by using evidence-based metrics. In this paper, we describe the development of an evidence-based security metrics scorecard specific to healthcare organizations. Study participants were asked to comment on the usability and usefulness of a prototype of a security metrics scorecard that was developed based on current research in the area of general security metrics. Study findings revealed that scorecards need to be customized for the healthcare setting in order for the security information to be useful and usable in healthcare organizations. The study findings resulted in the development of a security metrics scorecard that matches the healthcare security experts' information requirements.

  15. Fisher information metrics for binary classifier evaluation and training

    CERN Multimedia

    CERN. Geneva

    2018-01-01

    Different evaluation metrics for binary classifiers are appropriate to different scientific domains and even to different problems within the same domain. This presentation focuses on the optimisation of event selection to minimise statistical errors in HEP parameter estimation, a problem that is best analysed in terms of the maximisation of Fisher information about the measured parameters. After describing a general formalism to derive evaluation metrics based on Fisher information, three more specific metrics are introduced for the measurements of signal cross sections in counting experiments (FIP1) or distribution fits (FIP2) and for the measurements of other parameters from distribution fits (FIP3). The FIP2 metric is particularly interesting because it can be derived from any ROC curve, provided that prevalence is also known. In addition to its relation to measurement errors when used as an evaluation criterion (which makes it more interesting that the ROC AUC), a further advantage of the FIP2 metric is ...

  16. Metric regularity and subdifferential calculus

    International Nuclear Information System (INIS)

    Ioffe, A D

    2000-01-01

    The theory of metric regularity is an extension of two classical results: the Lyusternik tangent space theorem and the Graves surjection theorem. Developments in non-smooth analysis in the 1980s and 1990s paved the way for a number of far-reaching extensions of these results. It was also well understood that the phenomena behind the results are of metric origin, not connected with any linear structure. At the same time it became clear that some basic hypotheses of the subdifferential calculus are closely connected with the metric regularity of certain set-valued maps. The survey is devoted to the metric theory of metric regularity and its connection with subdifferential calculus in Banach spaces

  17. Narrowing the Gap Between QoS Metrics and Web QoE Using Above-the-fold Metrics

    OpenAIRE

    da Hora, Diego Neves; Asrese, Alemnew; Christophides, Vassilis; Teixeira, Renata; Rossi, Dario

    2018-01-01

    International audience; Page load time (PLT) is still the most common application Quality of Service (QoS) metric to estimate the Quality of Experience (QoE) of Web users. Yet, recent literature abounds with proposals for alternative metrics (e.g., Above The Fold, SpeedIndex and variants) that aim at better estimating user QoE. The main purpose of this work is thus to thoroughly investigate a mapping between established and recently proposed objective metrics and user QoE. We obtain ground tr...

  18. Metrics for border management systems.

    Energy Technology Data Exchange (ETDEWEB)

    Duggan, Ruth Ann

    2009-07-01

    There are as many unique and disparate manifestations of border systems as there are borders to protect. Border Security is a highly complex system analysis problem with global, regional, national, sector, and border element dimensions for land, water, and air domains. The complexity increases with the multiple, and sometimes conflicting, missions for regulating the flow of people and goods across borders, while securing them for national security. These systems include frontier border surveillance, immigration management and customs functions that must operate in a variety of weather, terrain, operational conditions, cultural constraints, and geopolitical contexts. As part of a Laboratory Directed Research and Development Project 08-684 (Year 1), the team developed a reference framework to decompose this complex system into international/regional, national, and border elements levels covering customs, immigration, and border policing functions. This generalized architecture is relevant to both domestic and international borders. As part of year two of this project (09-1204), the team determined relevant relative measures to better understand border management performance. This paper describes those relative metrics and how they can be used to improve border management systems.

  19. Implications of Metric Choice for Common Applications of Readmission Metrics

    OpenAIRE

    Davies, Sheryl; Saynina, Olga; Schultz, Ellen; McDonald, Kathryn M; Baker, Laurence C

    2013-01-01

    Objective. To quantify the differential impact on hospital performance of three readmission metrics: all-cause readmission (ACR), 3M Potential Preventable Readmission (PPR), and Centers for Medicare and Medicaid 30-day readmission (CMS).

  20. Issues in Benchmark Metric Selection

    Science.gov (United States)

    Crolotte, Alain

    It is true that a metric can influence a benchmark but will esoteric metrics create more problems than they will solve? We answer this question affirmatively by examining the case of the TPC-D metric which used the much debated geometric mean for the single-stream test. We will show how a simple choice influenced the benchmark and its conduct and, to some extent, DBMS development. After examining other alternatives our conclusion is that the “real” measure for a decision-support benchmark is the arithmetic mean.