WorldWideScience

Sample records for general cargo ships

  1. Hybridization of General Cargo Ships to meet the Required Energy Efficiency Design Index

    OpenAIRE

    Øverleir, Magnus Anders

    2015-01-01

    In this thesis a hybrid propulsion system is proposed for a general cargo ship with the aim to meet the required Energy Efficiency Design Index (EEDI). The study has investigated how a hybrid propulsion system will influence the ship s EEDI value and fuel economy. The central problem is the coming challenge for the general cargo segment meeting the required efficiency value. Especially small vessels (3 000-15 000 DWT) with high speed will have troubles complying with the stricter regulations....

  2. Advanced analysis of the transverse bulkhead of the a general cargo ship

    Science.gov (United States)

    Axinte, T.; Nutu, C.; Stanca, C.; Cupsa, O.; Carp, A.

    2016-08-01

    The paper presents the main strength factors stressing the transverse bulkhead of a cargo ship. The transverse bulkhead is one of the main components of the hull for a general cargo vessel. There are presented the role and the importance of the general cargo vessel's type using an original drawing made in NX 8.0 Software from Siemens. Further on, we are presented the importance of the transverse bulkhead of the general cargo ship's hull. Next there are analysed the formability of the transverse bulkhead's material and then we are determining the shear, normal and von Mises stresses in the traverse bulkhead, using the finite element method. Once the stresses are computed, there are also determined the fatigue life, strength safety factor and fatigue safety factor. The analysis of the transverse bulkhead is important for the safety of the general cargo vessel type because if this component of the ship does not resist to the various stresses and high deformations during bad storms on the sea or if the cargo is stored inappropriately, deformations or even breakage of the transverse bulkhead can occur, thus causing damages of the cargo ship, especially under heavy storm.

  3. Competitiveness of Slovenian Cargo Shipping

    Directory of Open Access Journals (Sweden)

    Milojka Počuča

    2012-10-01

    Full Text Available The paper presents Slovenian cargo shipping, its system oforganisation, ownership, age and value stntcture. It shows theimportance of shipping in the Slovenian overseas trade and itsimpact on the state's balance of payments. The analysis of thecompetitiveness of shipping was made from the viewpoint ofoperation costs and in comparison with the competitiveness ofEU shippers. The paper concludes with a proposal of possiblesystemic solutions which improve the competitiveness of Slovenianshipping.

  4. Integrated cargo routing and ship scheduling in liner shipping

    DEFF Research Database (Denmark)

    Kjeldsen, Karina Hjortshøj

    The problem consists of creating routes and schedules for a heterogeneous fleet of ships while determining the cargo routing and the speed for all relevant port pair/ship combinations. Transshipment is allowed in ports with transshipment capabilities. The service frequency is fixed at one week...

  5. Integrated cargo routing and ship scheduling in liner shipping

    DEFF Research Database (Denmark)

    Kjeldsen, Karina Hjortshøj

    The problem consists of creating routes and schedules for a heterogeneous fleet of ships while determining the cargo routing and the speed for all relevant port pair/ship combinations. Transshipment is allowed in ports with transshipment capabilities. The service frequency is fixed at one week....... Since the speed of the ships is a decision variable, the developed model is nonlinear. The model is made linear by means of variable redefinition. Using decomposition the linearized model is split into a master problem and a sub problem per ship, and solved by a column generation algorithm....

  6. The Liner Shipping Fleet Repositioning Problem with Cargo Flows

    DEFF Research Database (Denmark)

    Tierney, Kevin; Jensen, Rune Møller

    2012-01-01

    We solve an important problem for the liner shipping industry called the Liner Shipping Fleet Repositioning Problem (LSFRP). The LSFRP poses a large financial burden on liner shipping firms. During repositioning, vessels are moved between services in a liner shipping network. Shippers wish...... in the literature. We introduce a novel mathematical model of the LSFRP with cargo flows based on a carefully constructed graph and evaluate it on real world data from our industrial collaborator....

  7. Column generation approaches to ship scheduling with flexible cargo sizes

    DEFF Research Database (Denmark)

    Brønmo, Geir; Nygreen, Bjørn; Lysgaard, Jens

    2010-01-01

    We present a Dantzig-Wolfe procedure for the ship scheduling problem with flexible cargo sizes. This problem is similar to the well-known pickup and delivery problem with time windows, but the cargo sizes are defined by intervals instead of by fixed values. The flexible cargo sizes have...... consequences for the times used in the ports because both the loading and unloading times depend on the cargo sizes. We found it computationally hard to find exact solutions to the subproblems, so our method does not guarantee to find the optimum over all solutions. To be able to say something about how good...

  8. Solving the Liner Shipping Fleet Repositioning Problem with Cargo Flows

    DEFF Research Database (Denmark)

    Tierney, Kevin; Askelsdottir, Björg; Jensen, Rune Møller

    2015-01-01

    We solve a central problem in the liner shipping industry called the liner shipping fleet repositioning problem (LSFRP). The LSFRP poses a large financial burden on liner shipping firms. During repositioning, vessels are moved between routes in a liner shipping network. Liner carriers wish...... introduce a novel mathematical model and a simulated annealing algorithm for the LSFRP with cargo flows that makes use of a carefully constructed graph; we evaluate these approaches using real-world data from our industrial collaborator. Additionally, we compare the performance of our approach against...

  9. Cargo-mix optimization in Liner Shipping

    DEFF Research Database (Denmark)

    Christensen, Jonas Mark; Pacino, Dario; Fonseca, Joao Filipe Paiva

    , it is hard tomotivate companies to pay for cleaner transport since transportation is not visible to end customers,and therefore cannot justify a higher cost. Hence, optimization may be one of the few options forlimiting CO2 emission of international trade. A possible direction is to focus on vessels...... composition available in the different portsmight not be suitable for the full utilization of the vessel. The focus of our work is the analysis ofvessels’ cargo-mix, in particular finding what cargo composition is needed for a vessel to maximizeits utilization on a given service. Such a model can have various...... applications ranging from drivingrate prices, improving fleet composition and network design ((Christiansen et al., 2007; Reinhardtand Pisinger, 2012; Brouer et al., 2014))....

  10. Container shipping service selection and cargo routing with transshipment limits

    DEFF Research Database (Denmark)

    Balakrishnan, Anantaram; Karsten, Christian Vad

    2017-01-01

    We address the tactical planning problem faced by container liner shipping companies to select a set of sailing services from a given pool of candidate services and route available cargo over the chosen services so as to maximize profit. One of the distinctive features of our model is that it inc......We address the tactical planning problem faced by container liner shipping companies to select a set of sailing services from a given pool of candidate services and route available cargo over the chosen services so as to maximize profit. One of the distinctive features of our model...... solutions. We report successful computational results for realistic problem instances from a benchmark suite of liner shipping problems, solved using a standard solver applied to our reduced and strengthened model....

  11. The complex network of global cargo ship movements

    CERN Document Server

    Kaluza, Pablo; Gastner, Michael T; Blasius, Bernd

    2010-01-01

    Transportation networks play a crucial role in human mobility, the exchange of goods, and the spread of invasive species. With 90% of world trade carried by sea, the global network of merchant ships provides one of the most important modes of transportation. Here we use information about the itineraries of 16,363 cargo ships during the year 2007 to construct a network of links between ports. We show that the network has several features which set it apart from other transportation networks. In particular, most ships can be classified in three categories: bulk dry carriers, container ships and oil tankers. These three categories do not only differ in the ships' physical characteristics, but also in their mobility patterns and networks. Container ships follow regularly repeating paths whereas bulk dry carriers and oil tankers move less predictably between ports. The network of all ship movements possesses a heavy-tailed distribution for the connectivity of ports and for the loads transported on the links with s...

  12. An Optimal Capacity Planning Model for General Cargo Seaport

    Directory of Open Access Journals (Sweden)

    Čedomir Dundović

    2012-10-01

    Full Text Available In this paper the application of the queuing the01y in optimalcapacity planning for general cargo seaport is presented.The seaport as a queuing syslem is defined and tlws, on the basisof the arrival and serviced number of ships in an obsen•edtime unit, the appropriate operating indicators of a port systemare calculated. Using the model of total port costs, the munberof berths and cranes on the berth can be determined wherebythe optimal port system functioning is achieved.

  13. The Liner Shipping Fleet Repositioning Problem with Cargo Flows

    DEFF Research Database (Denmark)

    Tierney, Kevin; Jensen, Rune Møller

    2012-01-01

    We solve an important problem for the liner shipping industry called the Liner Shipping Fleet Repositioning Problem (LSFRP). The LSFRP poses a large financial burden on liner shipping firms. During repositioning, vessels are moved between services in a liner shipping network. Shippers wish...

  14. Solving the Liner Shipping Fleet Repositioning Problem with Cargo Flows

    DEFF Research Database (Denmark)

    Tierney, Kevin; Askelsdottir, Björg; Jensen, Rune Møller;

    2015-01-01

    to reposition vessels as cheaply as possible without disrupting cargo flows. The LSFRP is characterized by chains of interacting activities with a multicommodity flow over paths defined by the activities chosen. Despite its industrial importance, the LSFRP has received little attention in the literature. We...... introduce a novel mathematical model and a simulated annealing algorithm for the LSFRP with cargo flows that makes use of a carefully constructed graph; we evaluate these approaches using real-world data from our industrial collaborator. Additionally, we compare the performance of our approach against...

  15. Column generation approaches to ship scheduling with flexible cargo sizes

    DEFF Research Database (Denmark)

    Brønmo, Geir; Nygreen, Bjørn; Lysgaard, Jens

    cargo sizes to the column generation framework is not straightforward, and we handle the flexible cargo sizes heuristically when solving the subproblems. This leads to convergence issues in the branch-and-price search tree, and the optimal solution cannot be guaranteed. Hence we have introduced a method...... that generates an upper bound on the optimal objective. We have compared our method with an a priori column generation approach, and our computational experiments on real world cases show that the Dantzig-Wolfe approach is faster than the a priori generation of columns, and we are able to deal with larger...

  16. Research on characteristics of radiated noise of large cargo ship in shallow water

    Science.gov (United States)

    Liu, Yongdong; Zhang, Liang

    2017-01-01

    With the rapid development of the shipping industry, the number of the world's ship is gradually increasing. The characteristics of the radiated noise of the ship are also of concern. Since the noise source characteristics of multichannel interference, the surface wave and the sea temperature microstructure and other reasons, the sound signal received in the time-frequency domain has varying characteristics. The signal of the radiated noise of the large cargo ship JOCHOH from horizontal hydrophone array in some shallow water of China is processed and analyzed in the summer of 2015, and the results show that a large cargo ship JOCHOH has a number of noise sources in the direction of the ship's bow and stern lines, such as host, auxiliary and propellers. The radiating sound waves generated by these sources do not meet the spherical wave law at lower frequency in the ocean, and its radiated noise has inherent spatial distribution, the variation characteristics of the radiated noise the large cargo ship in time and frequency domain are given. The research method and results are of particular importance.

  17. 19 CFR 10.41a - Lift vans, cargo vans, shipping tanks, skids, pallets, and similar instruments of international...

    Science.gov (United States)

    2010-04-01

    ..., pallets, and similar instruments of international traffic; repair components. 10.41a Section 10.41a... Traffic § 10.41a Lift vans, cargo vans, shipping tanks, skids, pallets, and similar instruments of international traffic; repair components. (a)(1) Lift vans, cargo vans, shipping tanks, skids, pallets, caul...

  18. Indications of marine bioinvasion from network theory. An analysis of the global cargo ship network

    NARCIS (Netherlands)

    Kölzsch, A.; Blasius, B.

    2011-01-01

    The transport of huge amounts of small aquatic organisms in the ballast tanks and at the hull of large cargo ships leads to ever increasing rates of marine bioinvasion. In this study, we apply a network theoretic approach to examine the introduction of invasive species into new ports by global shipp

  19. Attenuation Characteristic Modeling of Power-line Channel in Cargo Ships

    Science.gov (United States)

    Tsuzuki, Shinji; Ishii, Seiichiro; Nishioka, Jun; Yamada, Yoshio

    Power-line communication (PLC) based local area network (LAN) in cargo ships is one of the promising applications of the PLC technology. In this paper, the signal attenuation characteristic when transmitting with the differential-mode (DIF) and the common-mode (COM) has been modeled respectively to design the PLC network in a cargo ship. The characteristic has been analyzed from the measured transfer function of 440V power-line channels for reefer containers in two typical ships. The measured transfer function was averaged from 2M to 30MHz (or until the measurement limit frequency) and approximated by the number of branches and the length of a signal propagating route. The mean accuracy of the obtained approximation equations was ±4dB. The area where the signal attenuation of COM transmission is less than that of DIF transmission has been studied from the equations.

  20. Cargo work for maritime operations

    Energy Technology Data Exchange (ETDEWEB)

    House, D.

    2005-07-01

    Previously published as Kemp & Young's Cargo Work, this new edition has been revised and expanded to reflect unit load containerised systems that are now used in the majority of cargo shipping, while retaining the necessary detail on transporting key classes of cargoes safely, efficiently and profitably. The book covers general principles and the latest international regulations that affect all cargo work, including cargo types and key characteristics of a wide range of cargo classes. It also details Roll On-Roll Off cargo handling, containerisation, equipment and offshore supply. Chapter 4 on bulk cargoes contains a section headed: Coal, characteristics, categories and procedures, precautions.

  1. Model of Optimal Cargo Transport Structure by Full Container Ship on Predefined Sailing Route

    Directory of Open Access Journals (Sweden)

    Serđo Kos

    2004-01-01

    Full Text Available This paper presents the mathematical model for solving theproblem of defining optimal cargo transport structure, occurringwhen, on a predefined sailing route, adequate number ofcontainers of various types, masses and sizes, possibly includingRO!RO cargo, is to be selected, i.e., a "container lot" is to beestablished in loading ports with the aim of gaining maximumship profit and, at the same time, of exploiting useful load andtransport capacity of container ship as much as possible. Theimplementation of the proposed model enables considerableincrease in the efficiency of container ship operations. Themodel was tested using a numerical example with real data.The applied post-optimal analysis examines the influence ofchange in some values of the mathematical model on the resultingoptimal program.

  2. Indications of marine bioinvasion from network theory. An analysis of the global cargo ship network

    Science.gov (United States)

    Kölzsch, A.; Blasius, B.

    2011-12-01

    The transport of huge amounts of small aquatic organisms in the ballast tanks and at the hull of large cargo ships leads to ever increasing rates of marine bioinvasion. In this study, we apply a network theoretic approach to examine the introduction of invasive species into new ports by global shipping. This is the first stage of the invasion process where it is still possible to intervene with regulating measures. We compile a selection of widely used and newly developed network properties and apply these to analyse the structure and spread characteristics of the directed and weighted global cargo ship network (GCSN). Our results reveal that the GCSN is highly efficient, shows small world characteristics and is positive assortative, indicating that quick spread of invasive organisms between ports is likely. The GCSN shows strong community structure and contains two large communities, the Atlantic and Pacific trading groups. Ports that appear as connector hubs and are of high centralities are the Suez and Panama Canal, Singapore and Shanghai. Furthermore, from robustness analyses and the network's percolation behaviour, we evaluate differences of onboard and in-port ballast water treatment, set them into context with previous studies and advise bioinvasion management strategies.

  3. 75 FR 64390 - Shipping Coordinating Committee; Notice of Committee Meeting

    Science.gov (United States)

    2010-10-19

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF STATE Shipping Coordinating Committee; Notice of Committee Meeting The Shipping Coordinating Committee (SHC) will conduct an... --Formal safety assessment --Piracy and armed robbery against ships --General cargo ship...

  4. 49 CFR 178.320 - General requirements applicable to all DOT specification cargo tank motor vehicles.

    Science.gov (United States)

    2010-10-01

    ...) Each cargo tank or cargo tank motor vehicle design type, including its required accident damage... specification cargo tank motor vehicles. 178.320 Section 178.320 Transportation Other Regulations Relating to... Transportation § 178.320 General requirements applicable to all DOT specification cargo tank motor vehicles....

  5. 46 CFR 154.534 - Cargo pumps and cargo compressors.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo pumps and cargo compressors. 154.534 Section 154.534 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES... Equipment Cargo and Process Piping Systems § 154.534 Cargo pumps and cargo compressors. Cargo pumps...

  6. Investigation of active interrogation techniques to detect special nuclear material in maritime environments: Boarded search of a cargo container ship

    Energy Technology Data Exchange (ETDEWEB)

    Grogan, Brandon R., E-mail: groganbr@ornl.gov; Henkel, James J.; Johnson, Jeffrey O.; Mihalczo, John T.; Miller, Thomas M.; Patton, Bruce W.

    2013-12-01

    The detonation of a terrorist nuclear weapon in the United States would result in the massive loss of life and grave economic damage. Even if a device was not detonated, its known or suspected presence aboard a cargo container ship in a U.S. port would have major economic and political consequences. One possible means to prevent this threat would be to board a ship at sea and search for the device before it reaches port. The scenario considered here involves a small Coast Guard team with strong intelligence boarding a container ship to search for a nuclear device. Using active interrogation, the team would nonintrusively search a block of shipping containers to locate the fissile material. Potential interrogation source and detector technologies for the team are discussed. The methodology of the scan is presented along with a technique for calculating the required interrogation source strength using computer simulations. MCNPX was used to construct a computer model of a container ship, and several search scenarios were simulated. The results of the simulations are presented in terms of the source strength required for each interrogation scenario. Validation measurements were performed in order to scale these simulation results to expected performance. Interrogations through the short (2.4 m) axis of a standardized shipping container appear to be feasible given the entire range of container loadings tested. Interrogations through several containers at once or a single container through its long (12.2 m) axis do not appear to be viable with a portable interrogation system.

  7. 46 CFR 154.1866 - Cargo hose connection: Transferring cargo.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo hose connection: Transferring cargo. 154.1866... CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Operations § 154.1866 Cargo hose connection: Transferring cargo. No person may transfer cargo through a cargo hose...

  8. 46 CFR 30.10-5b - Cargo control station-TB/ALL.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Cargo control station-TB/ALL. 30.10-5b Section 30.10-5b Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS GENERAL PROVISIONS Definitions § 30.10-5b Cargo control station—TB/ALL. The term cargo control station means a location that is manned...

  9. Working out of generalized dynamic model of cargo fixation with cargo pads jointly with flexible and thrust elements under the action spatial force system

    Directory of Open Access Journals (Sweden)

    Khabibulla TURANOV

    2011-01-01

    Full Text Available The article gives an account of the results of working out a generalized dynamic model of fixation of cargo with pads jointly with flexible and thrust elements. Working out a generalized dynamic model of cargo fixation is rather a complicated problem not in the sense of solving differential equations systems but in the sense of presenting them as a complex mechanical system “cargo – pads – flexible elements – thrust bars”. Generalized dynamic model of cargo with pads observed that this model represents technology of joint work of flexible and thrust fastening means of cargo on rolling stock. In particular, on the basis of this model there can be obtained the technology models of joint work of flexible and elastic fastening means of cargo without pads of fastening flexible elements of cargo with pads without thrust bars and also flexible fastening elements of cargo without pads and thrust bars at asymmetrical and/or symmetrical allocation of cargo in the wagon. A specific feature (novelty feature of the proposed dynamic model is inclusion into the model of both cargo pads and thrust bars which are nailed to the wagon floor close to the butt and lateral sides of cargo.

  10. 46 CFR 30.10-5 - Cargo-TB/ALL.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Cargo-TB/ALL. 30.10-5 Section 30.10-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS GENERAL PROVISIONS Definitions § 30.10-5 Cargo—TB/ALL. The term cargo means combustible liquid, flammable liquid, or liquefied flammable gas unless...

  11. Dry bulk cargo shipping - An overlooked threat to the marine environment?

    Science.gov (United States)

    Grote, Matthias; Mazurek, Nicole; Gräbsch, Carolin; Zeilinger, Jana; Le Floch, Stéphane; Wahrendorf, Dierk-Steffen; Höfer, Thomas

    2016-09-15

    Approximately 9.5billiontonnes of goods is transported over the world oceans annually with dry bulk representing the largest cargo group. This paper aims to analyse whether the transport and associated inputs of dry bulks into the sea create a risk for the marine environment. For this purpose, we analyse the international regulatory background concerning environmental protection (MARPOL), estimate quantities and identify inputs of such cargoes into the oceans (accidental and operational), and use available information for hazard assessment. Annually, more than 2.15milliontonnes of dry bulk cargoes are likely to enter the oceans, of which 100,000tonnes are potentially harmful to the marine environment according to the definition included in draft maritime regulation. The assessment of the threat to the marine environment is hampered by a lack of available information on chemical composition, bioavailability and toxicity. Perspectives for amendments of the unsatisfying pollution prevention regulations are discussed.

  12. Natural gas for ship propulsion in Denmark - Possibilities for using LNG and CNG on ferry and cargo routes

    Energy Technology Data Exchange (ETDEWEB)

    Stuer-Lauridsen, F.; Nielsen, Jesper B. (LITEHAUZ, Copenhagen (Denmark)); Odgaard, T.; Birkeland, M. (IncentivePartners, Birkeroed (Denmark)); Winter Graugaard, C.; Blikom, L.P. (DNV, Copenhagen (Denmark)); Muro-Sun, N.; Andersen, Morten; OEvlisen, F. (Ramboell Oil and Gas, Esbjerg (Denmark))

    2010-07-01

    The project's main task was to review logistical, technical and economic feasibility for using Liquefied Natural Gas (LNG) and Compressed Natural Gas (CNG) as fuel for ship propulsion and the supply of LNG or CNG to Danish ports from existing natural gas lines, trucks or by ship. The following key findings are related to the use of natural gas as fuel for ships in Denmark: Natural gas as propulsion fuel in ships: 1) Advantages: Provide solution to present air emission challenges 2) Barriers: Capital investments large 3) Synergies: Developments in Norway and Baltic Sea area 4) Economy: Positive case for operation for large consumers 5) Future: Develop bunkering options for short sea shipping LNG: 6) Propulsion technology in ships is mature and proven 7) Distribution network not yet developed for use in ships 8) Safety concerns are demanding but manageable 9) Can enter existing bunkering value chain CNG: 10) Well developed for land based transport, not yet for shipping 11) Distribution network for natural gas exists in Denmark 12) Safety concerns are demanding but manageable 13) No seaborne CNG value chains in operation An immediate focus on the ferry sector in Denmark will reap benefits on a relatively short time scale. For the short sea shipping sector away to promote the conversion to natural gas is to support the development of storage and bunkering facilities in main ports. Given the general expectations in the shipping community LNG will presumably be the de facto choice at least for the 5-10 years ahead and the demand for facilities and bunkers will be for LNG. (LN)

  13. United States Seaport Security: Protection Against a Nuclear Device Attack Delivered in a Shipping Cargo Container

    Science.gov (United States)

    2014-06-13

    phone, laptop, airline mechanic’s certificate, and security passes for airports in Egypt, Thailand , and Canada. The following year, in March 2002...major operation areas for federal crime, including drug trafficking , cargo theft, and smuggling of contraband and aliens. 3. Ports are open and...container’s latch and continuously collects and transmits data without human intervention. This procedure is concurrently utilized as part of the C-TPAT

  14. Investigations of active interrogation techniques to detect special nuclear material in maritime environments: Standoff interrogation of small- and medium-sized cargo ships

    Energy Technology Data Exchange (ETDEWEB)

    Miller, Thomas M., E-mail: millertm@ornl.gov; Patton, Bruce W.; Grogan, Brandon R.; Henkel, James J.; Murphy, Brian D.; Johnson, Jeffrey O.; Mihalczo, John T.

    2013-12-01

    In this work, several active interrogation (AI) sources are evaluated to determine their usefulness in detecting the presence of special nuclear material (SNM) in fishing trawlers, small cargo transport ships, and luxury yachts at large standoff distances from the AI source and detector. This evaluation is performed via computational analysis applying Monte Carlo methods with advanced variance reduction techniques. The goal is to determine the AI source strength required to detect the presence of SNM. The general conclusion of this study is that AI is not reliable when SNM is heavily shielded and not tightly coupled geometrically with the source and detector, to the point that AI should not be considered a via interrogation option in these scenarios. More specifically, when SNM is shielded by hydrogenous material large AI source strengths are required if detection is based on neutrons, which is not surprising. However, if the SNM is shielded by high-Z material the required AI source strengths are not significantly different if detection is based on neutrons or photons, which is somewhat surprising. Furthermore, some of the required AI source strengths that were calculated are very large. These results coupled with the realities of two ships moving independently at sea and other assumptions made during this analysis make the use of standoff AI in the maritime environment impractical.

  15. SpaceX launches cargo ship but rocket recovery test ends in crash

    Institute of Scientific and Technical Information of China (English)

    Jonathan; Amos

    2015-01-01

    The American SpaceX firm says its experiment to bring part of its Falcon rocket down to a soft landing on a floating sea platform did not work.The vehicle was launched on a mission to send a cargo capsule to the International Space Station.But once the first-stage of the rocket completed its part of this task,it tried to make a controlled return.The company CEO Elon Musk tweeted that the booster had hit the platform hard.

  16. 46 CFR 154.315 - Cargo pump and cargo compressor rooms.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo pump and cargo compressor rooms. 154.315 Section... CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Design, Construction and Equipment Ship Arrangements § 154.315 Cargo pump and cargo compressor rooms. (a) Cargo pump rooms and...

  17. Growth drivers of Finnish-Estonian general cargo transports

    Directory of Open Access Journals (Sweden)

    Olli-Pekka Hilmola

    2014-08-01

    Full Text Available Nearly the entire European trade of Finland is being executed through short sea shipping connections to Estonia, Sweden and Germany. Earlier the most important connections were to Sweden and Germany, but during Estonia’s new independence era, volumes to this alternative direction have increased considerably, and are continuously growing (time alone is good proxy for growth. This cannot be said for transport flows to Sweden, and Germany also holds high uncertainty. Based on the findings of this research, it is argued that Estonian connection growth was caused by different factors. One important factor was European Union membership in the year 2004. It should be emphasized that this was step-wise and was realized a decade ago. The main influence is that of the development of bulky trade. As measured in weight, both export and import of Finland with Estonia was found to be significant. However, in monetary terms only Finnish imports from Estonia was statistically significant. Finnish exports in turn to Estonia in value terms have contributed a negative effect (or even being insignificant. As the regression model was expanded, taking into account all three Baltic States and Poland, reliable additional findings couldn’t be drawn. Completed regression analysis shows that the explanation power of GDP based models became much lower after the years 2005‒2006.

  18. 46 CFR 151.20-1 - Piping-general.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Piping-general. 151.20-1 Section 151.20-1 Shipping COAST... LIQUID HAZARDOUS MATERIAL CARGOES Cargo Transfer § 151.20-1 Piping—general. (a) Cargo piping systems shall be arranged and fabricated in accordance with this section and Subchapter F. The class of...

  19. The Cargo

    DEFF Research Database (Denmark)

    Birch, Thomas; Charlton, Michael F.; Biggs, Lynn

    2014-01-01

    The Gresham ship was carrying a substantial cargo of different metals when she sank, representing a considerable financial loss. Reports record that some of that material recovered in 1846 included 2700 tin ingots, lead pigs and iron bars (British Archaeological Association, 1847, 361). The excav...

  20. Path tracking of underactuated ships with general form of dynamics

    Science.gov (United States)

    Li, Ji-Hong

    2016-03-01

    This article considers the path tracking problem for underactuated ships with general form of dynamics including uncertainties. By introducing certain two polar coordinate transformations, the ship's tracking kinematics and dynamics can be transformed into certain two-inputs-two-outputs nonlinear strict-feedback form. To avoid possible singularity problem in the backstepping control design, we introduce an asymptotic modification of orientation concept. Presented tracking scheme can guarantee the uniformly ultimately boundedness of closed-loop system in terms of polar coordinates. For the convenience of comparison with previous related works, where all tracking schemes were discussed in the Cartesian frame, we carry out some case studies to investigate the conditions under which the proposed tracking method can guarantee the same stability and convergence properties of tracking errors in the Cartesian frame. Numerical simulation studies are also carried out to demonstrate the effectiveness of presented tracking scheme.

  1. 46 CFR 153.970 - Cargo transfer piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo transfer piping. 153.970 Section 153.970 Shipping... § 153.970 Cargo transfer piping. The person in charge of cargo transfer shall ensure that: (a) Cargo is transferred to or from a cargo tank only through the tankship's cargo piping system; (b) Vapor not returned...

  2. Shipping

    NARCIS (Netherlands)

    Wijnolst, N.; Wergeland, T.

    1996-01-01

    Shipping is a multi-faceted industry which is rather complex to define from an academic point of view. This book attempts to grasp these complexities and provide the reader with an overview of the main topics and terminology in shipping. The book is based on material from our courses in shipping at

  3. 46 CFR 154.1826 - Opening of cargo tanks and cargo sampling.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Opening of cargo tanks and cargo sampling. 154.1826... CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Operations § 154.1826 Opening of cargo tanks and cargo sampling. (a) The master shall ensure that each cargo tank opening...

  4. 46 CFR 64.97 - Cargo hose.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Cargo hose. 64.97 Section 64.97 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING MARINE PORTABLE TANKS AND CARGO HANDLING SYSTEMS Cargo Handling System § 64.97 Cargo hose. Each hose assembly, consisting of couplings and a...

  5. 46 CFR 151.03-9 - Cargo.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo. 151.03-9 Section 151.03-9 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES BARGES CARRYING BULK LIQUID HAZARDOUS MATERIAL CARGOES Definitions § 151.03-9 Cargo. This term means any liquid, gas or solid having...

  6. 46 CFR 153.930 - Cargo antidotes.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo antidotes. 153.930 Section 153.930 Shipping COAST... Cargo antidotes. No person may operate a tankship that carries a cargo listed in Table 1 unless the tankship has on board the antidotes described for the cargo in the Medical First Aid Guide for Use...

  7. 46 CFR 45.137 - Cargo ports.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Cargo ports. 45.137 Section 45.137 Shipping COAST GUARD....137 Cargo ports. (a) Unless otherwise authorized by the Commandant, the lower edge of any opening for cargo, personnel, machinery access, or similar opening in the side of a ship must be above a line...

  8. 78 FR 17466 - Shipping Coordinating Committee; Notice of Committee Meeting

    Science.gov (United States)

    2013-03-21

    ... Watchkeeping for Fishing Vessel Personnel (STCW-F), 1995 --Development of Guidelines for wing-in-ground (WIG...) --Review of general cargo ship safety --Proposed amendment to the STCW Code's colour vision...

  9. 46 CFR 153.935a - Storage of cargo samples.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Storage of cargo samples. 153.935a Section 153.935a Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS... § 153.935a Storage of cargo samples. (a) The master shall make sure that any cargo samples are stored...

  10. 46 CFR 153.977 - Supervision of cargo transfer.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Supervision of cargo transfer. 153.977 Section 153.977 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS... Procedures § 153.977 Supervision of cargo transfer. The person in charge of cargo transfer shall:...

  11. 46 CFR 153.910 - Cargo piping plan.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo piping plan. 153.910 Section 153.910 Shipping... Information § 153.910 Cargo piping plan. No person may operate a tankship unless the tankship has a cargo piping plan that: (a) Shows all cargo piping on the tankship; (b) Shows all cargo valving, pumps,...

  12. 33 CFR 126.27 - General permit for handling dangerous cargo.

    Science.gov (United States)

    2010-07-01

    ...) in bulk, portable tanks, containers, or packagings, at designated waterfront facilities, conditioned... cargo in limited-quantity packaging. (e) Transport units and portable tanks containing dangerous cargo... in the event of an accident. Cargo not required to be segregated, when in break-bulk form, is...

  13. 46 CFR 308.551 - War risk insurance clearing agency agreement for cargo, Form MA-321.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 8 2010-10-01 2010-10-01 false War risk insurance clearing agency agreement for cargo... EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Cargo Insurance Iv-General § 308.551 War risk insurance... American War Risk Agency or MARAD. ...

  14. Photocaged Competitor Guests: A General Approach Toward Light-Activated Cargo Release From Cucurbiturils.

    Science.gov (United States)

    Romero, Miguel A; Basílio, Nuno; Moro, Artur J; Domingues, Mara; González-Delgado, José A; Arteaga, Jesús F; Pischel, Uwe

    2017-07-03

    A general approach toward the light-induced guest release from cucurbit[7]uril by means of a photoactivatable competitor was devised. An o-nitrobenzyl-caged competitor is photolyzed to generate a competitive guest that can displace cargo from the host macrocycle solely based on considerations of chemical equilibrium. With this method the release of terpene guests from inclusion complexes with cucurbit[7]uril was demonstrated. The binding of the herein investigated terpenes, all being lead fragrant components in essential oils, has been characterized for the first time. They feature binding constants of up to 10(8)  L mol(-1) and a high differential binding selectivity (spanning four orders of magnitude for the binding constants for the particular set of terpenes). By fine-tuning the photoactivatable competitor guest, selective and also sequential release of the terpenes was achieved. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. GPACC program cost work breakdown structure-dictionary. General purpose aft cargo carrier study, volume 3

    Science.gov (United States)

    1985-01-01

    The results of detailed cost estimates and economic analysis performed on the updated Model 101 configuration of the general purpose Aft Cargo Carrier (ACC) are given. The objective of this economic analysis is to provide the National Aeronautics and Space Administration (NASA) with information on the economics of using the ACC on the Space Transportation System (STS). The detailed cost estimates for the ACC are presented by a work breakdown structure (WBS) to ensure that all elements of cost are considered in the economic analysis and related subsystem trades. Costs reported by WBS provide NASA with a basis for comparing competing designs and provide detailed cost information that can be used to forecast phase C/D planning for new projects or programs derived from preliminary conceptual design studies. The scope covers all STS and STS/ACC launch vehicle cost impacts for delivering payloads to a 160 NM low Earth orbit (LEO).

  16. Modelling the impact of liner shipping network perturbations on container cargo routing: Southeast Asia to Europe application.

    Science.gov (United States)

    Achurra-Gonzalez, Pablo E; Novati, Matteo; Foulser-Piggott, Roxane; Graham, Daniel J; Bowman, Gary; Bell, Michael G H; Angeloudis, Panagiotis

    2016-06-03

    Understanding how container routing stands to be impacted by different scenarios of liner shipping network perturbations such as natural disasters or new major infrastructure developments is of key importance for decision-making in the liner shipping industry. The variety of actors and processes within modern supply chains and the complexity of their relationships have previously led to the development of simulation-based models, whose application has been largely compromised by their dependency on extensive and often confidential sets of data. This study proposes the application of optimisation techniques less dependent on complex data sets in order to develop a quantitative framework to assess the impacts of disruptive events on liner shipping networks. We provide a categorization of liner network perturbations, differentiating between systemic and external and formulate a container assignment model that minimises routing costs extending previous implementations to allow feasible solutions when routing capacity is reduced below transport demand. We develop a base case network for the Southeast Asia to Europe liner shipping trade and review of accidents related to port disruptions for two scenarios of seismic and political conflict hazards. Numerical results identify alternative routing paths and costs in the aftermath of port disruptions scenarios and suggest higher vulnerability of intra-regional connectivity.

  17. 46 CFR 153.957 - Persons in charge of transferring liquid cargo in bulk or cleaning cargo tanks.

    Science.gov (United States)

    2010-10-01

    ... safely transfer liquid cargo in bulk or to safely clean cargo tanks; (2) Each transfer of liquid cargo in... or cleaning cargo tanks. 153.957 Section 153.957 Shipping COAST GUARD, DEPARTMENT OF HOMELAND... transferring liquid cargo in bulk or cleaning cargo tanks. (a) The owner and operator of the vessel, and his...

  18. 46 CFR 153.907 - Cargo information.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo information. 153.907 Section 153.907 Shipping... Information § 153.907 Cargo information. (a) The master shall ensure that the following information for each... process for the vessel. (b) The master shall make sure that the following information for cargoes...

  19. 46 CFR 154.1858 - Cargo hose.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo hose. 154.1858 Section 154.1858 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Operations § 154.1858 Cargo hose. The person...

  20. 46 CFR 28.885 - Cargo gear.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Cargo gear. 28.885 Section 28.885 Shipping COAST GUARD... Aleutian Trade Act Vessels § 28.885 Cargo gear. (a) The safe working load (SWL) for the assembled gear shall be marked on the heel of each cargo boom, crane, or derrick. These letters and figures are to...

  1. 影响内贸煤炭船最大载货能力的因素研究%Study on Influence Factors of Domestic Coal Ship Maximum Cargo Capacity

    Institute of Scientific and Technical Information of China (English)

    王威

    2015-01-01

    Under the influence of domestic coal ship navigation area, seasonal, oil-water reserves, con-stant, ship ballast water storage and other factors, the change of large cargo capacity, the paper gives the cal-culation method of domestic coal ship maximum cargo capacity, analysis of the factors affecting the domestic coal ship maximum cargo capacity and determination method, is of guiding significance in practical work.%内贸煤炭船受航区、季节、油水储备量、船舶常数、压载水存量等因素的影响,其载货能力变化较大。文章给出了计算内贸煤炭船最大载货能力的方法,分析了影响内贸煤炭船最大载货能力的各项因素及确定方法,对实际工作有指导意义。

  2. 46 CFR 98.30-11 - Cargo pumps.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Cargo pumps. 98.30-11 Section 98.30-11 Shipping COAST..., ARRANGEMENT, AND OTHER PROVISIONS FOR CERTAIN DANGEROUS CARGOES IN BULK Portable Tanks § 98.30-11 Cargo pumps. No person may operate a cargo pump to transfer a product to or from a portable tank unless the...

  3. 46 CFR 105.20-3 - Cargo tanks.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Cargo tanks. 105.20-3 Section 105.20-3 Shipping COAST... VESSELS DISPENSING PETROLEUM PRODUCTS Specific Requirements-Cargo Tanks § 105.20-3 Cargo tanks. (a) Construction and Materials. (1) The cargo tanks must be constructed of iron, steel, copper, nickel...

  4. 46 CFR 151.45-4 - Cargo-handling.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo-handling. 151.45-4 Section 151.45-4 Shipping COAST... LIQUID HAZARDOUS MATERIAL CARGOES Operations § 151.45-4 Cargo-handling. (a) On a United States tank barge... the persons in charge of cargo handling. (h) Auxiliary steam, air, fuel, or electric current. When...

  5. 46 CFR 151.45-6 - Maximum amount of cargo.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Maximum amount of cargo. 151.45-6 Section 151.45-6 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES BARGES CARRYING BULK LIQUID HAZARDOUS MATERIAL CARGOES Operations § 151.45-6 Maximum amount of cargo. (a)...

  6. 46 CFR 154.552 - Cargo hose: Compatibility.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo hose: Compatibility. 154.552 Section 154.552 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY... Hose § 154.552 Cargo hose: Compatibility. Liquid and vapor cargo hoses must: (a) Not chemically...

  7. 46 CFR 38.05-10 - Installation of cargo tanks-general-TB/ALL.

    Science.gov (United States)

    2010-10-01

    ... including testing for the hull and integral tanks. In the application of the requirements for the hydrostatic test of the cargo tanks, the hydrostatic test shall in no case be less severe than the...

  8. 46 CFR 154.356 - Cargo emergency jettisoning piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo emergency jettisoning piping. 154.356 Section 154.356 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES... Equipment Ship Arrangements § 154.356 Cargo emergency jettisoning piping. Emergency jettisoning piping...

  9. 46 CFR 153.972 - Connecting a cargo hose.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Connecting a cargo hose. 153.972 Section 153.972 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Operations Cargo...

  10. 46 CFR 153.953 - Signals during cargo transfer.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Signals during cargo transfer. 153.953 Section 153.953 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS... Procedures § 153.953 Signals during cargo transfer. The master shall ensure that: (a) The tankship displays a...

  11. 46 CFR 153.440 - Cargo temperature sensors.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo temperature sensors. 153.440 Section 153.440 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS... Temperature Control Systems § 153.440 Cargo temperature sensors. (a) Except as prescribed in paragraph (c) of...

  12. 46 CFR 153.908 - Cargo viscosity and melting point information; measuring cargo temperature during discharge...

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo viscosity and melting point information; measuring..., LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Operations Documents and Cargo Information § 153.908 Cargo viscosity and melting point information; measuring cargo temperature during discharge:...

  13. 46 CFR 154.1834 - Cargo transfer piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo transfer piping. 154.1834 Section 154.1834... piping. The person in charge of cargo transfer shall ensure that cargo is transferred to or from a cargo tank only through the cargo piping system....

  14. 46 CFR 154.554 - Cargo hose: Bursting pressure.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo hose: Bursting pressure. 154.554 Section 154.554... Hose § 154.554 Cargo hose: Bursting pressure. Cargo hose that may be exposed to the pressure in the cargo tank, the cargo pump discharge, or the vapor compressor discharge must have a bursting pressure of...

  15. Groupage Cargo Transportation Model

    Directory of Open Access Journals (Sweden)

    Aleksejevs Ruslans

    2016-03-01

    Full Text Available In this work we consider a specific problem of optimal planning of maritime transportation of multiproduct cargo by ships of one (corporate strategy or several (partially corporate strategy companies: the core of the problem consists of the existence of the network of intermediate seaports (i.e. transitional seaports, where for every ship arrived the cargo handling is done, and which are situated between the starting and the finishing seaports. In this work, there are mathematical models built from scratch in the form of multicriteria optimization problem; then the goal attainment method of Gembicki is used for reducing the built models to a one-criterion problem of linear programming.

  16. 46 CFR 32.56-5 - General-T/ALL.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false General-T/ALL. 32.56-5 Section 32.56-5 Shipping COAST... General—T/ALL. (a) Except as provided in paragraphs (c) and (d) of this section, each category A machinery... space and each main cargo control station must be aft of: (1) The cargo area; (2) All cargo pumprooms...

  17. 46 CFR 154.310 - Cargo piping systems.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo piping systems. 154.310 Section 154.310 Shipping... Arrangements § 154.310 Cargo piping systems. Cargo liquid or vapor piping must: (a) Be separated from other piping systems, except where an interconnection to inert gas or purge piping is required by §...

  18. 46 CFR 98.25-80 - Cargo hose.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Cargo hose. 98.25-80 Section 98.25-80 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS SPECIAL CONSTRUCTION, ARRANGEMENT, AND OTHER PROVISIONS FOR CERTAIN DANGEROUS CARGOES IN BULK Anhydrous Ammonia in Bulk §...

  19. 46 CFR 151.25-2 - Cargo handling space.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo handling space. 151.25-2 Section 151.25-2 Shipping... BULK LIQUID HAZARDOUS MATERIAL CARGOES Environmental Control § 151.25-2 Cargo handling space. Pump rooms, compressor rooms, refrigeration rooms, heating rooms, instrument rooms or other closed...

  20. 46 CFR 154.500 - Cargo and process piping standards.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo and process piping standards. 154.500 Section 154... Equipment Cargo and Process Piping Systems § 154.500 Cargo and process piping standards. The cargo liquid and vapor piping and process piping systems must meet the requirements in §§ 154.503 through...

  1. 46 CFR 153.251 - Independent cargo tanks.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Independent cargo tanks. 153.251 Section 153.251... CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Design and Equipment Cargo Tanks § 153.251 Independent cargo tanks. All independent cargo tank must meet § 38.05-10 (a)(1), (b), (d),...

  2. 46 CFR 151.13-5 - Cargo segregation-tanks.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo segregation-tanks. 151.13-5 Section 151.13-5... CARRYING BULK LIQUID HAZARDOUS MATERIAL CARGOES Cargo Segregation § 151.13-5 Cargo segregation—tanks. (a... symbols used in lines 1 and 2, in order, under the tank segregation column of Table 151.05....

  3. 46 CFR 154.412 - Cargo tank corrosion allowance.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo tank corrosion allowance. 154.412 Section 154.412... Containment Systems § 154.412 Cargo tank corrosion allowance. A cargo tank must be designed with a corrosion...) carries a cargo that corrodes the tank material. Note: Corrosion allowance for independent tank type C...

  4. Hydroelastic response of 19,000 TEU class ultra large container ship with novel mobile deckhouse for maximizing cargo capacity

    Directory of Open Access Journals (Sweden)

    Hong-Il Im

    2017-05-01

    Full Text Available This paper is related to structural design evaluation of 19,000 TEU ultra large container ship, dealing with hydroelastic response, i.e. springing and whipping. It illustrates application of direct calculation tools and methodologies to both fatigue and ultimate strength assessment, simultaneously taking into account ship motions and her elastic deformations. Methodology for springing and whipping assessment within so called WhiSp notation is elaborated in details, and in order to evaluate innovative container ship design with increased loading capacity, a series of independent hydroelastic computations for container ship with mobile deckhouse and conventional one are performed with the same calculation setup. Fully coupled 3D FEM – 3D BEM model is applied, while the ultimate bending capacity of hull girder is determined by means of MARS software. Beside comparative analysis of representative quantities for considered ships, relative influence of hydroelasticity on ship response is addressed.

  5. 46 CFR 154.444 - General.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false General. 154.444 Section 154.444 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR SELF... § 154.444 General. An independent tank type B must be designed to meet §§ 154.445 through 154.449....

  6. 46 CFR 32.50-30 - Cargo hose-TB/ALL.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Cargo hose-TB/ALL. 32.50-30 Section 32.50-30 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS SPECIAL EQUIPMENT, MACHINERY, AND HULL REQUIREMENTS Pumps, Piping, and Hose for Cargo Handling § 32.50-30 Cargo hose—TB/ALL. Cargo hose carried on...

  7. Routing and Scheduling in Tramp Shipping - Integrating Bunker Optimization

    DEFF Research Database (Denmark)

    Vilhelmsen, Charlotte; Lusby, Richard Martin; Larsen, Jesper

    A tramp ship operator typically has some contracted cargoes that must be carried and seeks to maximize pro_t by carrying optional cargoes. Hence, tramp ships operate much like taxies following available cargoes and not according to a _xed route network and itinerary as liner ships. Marine fuel...

  8. Research on probability distribution of port cargo throughput

    Institute of Scientific and Technical Information of China (English)

    SUN Liang; TAN De-rong

    2008-01-01

    In order to more accurately examine developing trends in gross cargo throughput, we have modeled the probability distribution of cargo throughput. Gross cargo throughput is determined by the time spent by cargo ships in the port and the operating efficiency of handling equipment. Gross cargo throughput is the sum of all compound variables determining each aspect of cargo throughput for every cargo ship arriving at the port. Probability distribution was determined using the Wald equation. The results show that the variability of gross cargo throughput primarily depends on the different times required by different cargo ships arriving at the port. This model overcomes the shortcoming of previous models: inability to accurately determine the probability of a specific value of future gross cargo throughput. Our proposed model of cargo throughput depends on the relationship between time required by a cargo ship arriving at the port and the operational capacity of handling equipment at the port. At the same time, key factors affecting gross cargo throughput are analyzed. In order to test the efficiency of the model, the cargo volume of a port in Shandong Province was used as an example. In the case study the actual results matched our theoretical analysis.

  9. 46 CFR 308.517 - Open Cargo Policy, Form MA-300.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 8 2010-10-01 2010-10-01 false Open Cargo Policy, Form MA-300. 308.517 Section 308.517... Risk Cargo Insurance Ii-Open Policy War Risk Cargo Insurance § 308.517 Open Cargo Policy, Form MA-300. The standard form of War Risk Open Cargo, Form MA-300, may be obtained from the American War...

  10. 46 CFR 150.160 - Carrying a cargo as an exception to the compatibility chart.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Carrying a cargo as an exception to the compatibility... BULK DANGEROUS CARGOES COMPATIBILITY OF CARGOES § 150.160 Carrying a cargo as an exception to the compatibility chart. The Operator of a vessel having on board a cargo carried as an exception under §...

  11. Blind source separation of ship-radiated noise based on generalized Gaussian model

    Institute of Scientific and Technical Information of China (English)

    Kong Wei; Yang Bin

    2006-01-01

    When the distribution of the sources cannot be estimated accurately, the ICA algorithms failed to separate the mixtures blindly. The generalized Gaussian model (GGM) is presented in ICA algorithm since it can model nonGaussian statistical structure of different source signals easily. By inferring only one parameter, a wide class of statistical distributions can be characterized. By using maximum likelihood (ML) approach and natural gradient descent, the learning rules of blind source separation (BSS) based on GGM are presented. The experiment of the ship-radiated noise demonstrates that the GGM can model the distributions of the ship-radiated noise and sea noise efficiently, and the learning rules based on GGM gives more successful separation results after comparing it with several conventional methods such as high order cumulants and Gaussian mixture density function.

  12. 77 FR 64576 - Shipping Coordinating Committee; Notice of Committee Meeting

    Science.gov (United States)

    2012-10-22

    ... items to be considered include: --Adoption of the agenda; report on credentials. --Decisions of other IMO bodies. --Consideration and adoption of proposed amendments to the Convention. --General review of... Trade Recovery. --Ship/port interface. A. Facilitation of shipments of dangerous cargoes. --Technical...

  13. Optimization in liner shipping

    DEFF Research Database (Denmark)

    Brouer, Berit Dangaard; Karsten, Christian Vad; Pisinger, David

    2017-01-01

    Seaborne trade is the lynchpin in almost every international supply chain, and about 90% of non-bulk cargo worldwide is transported by container. In this survey we give an overview of data-driven optimization problems in liner shipping. Research in liner shipping is motivated by a need for handling...... research....

  14. Cargo transport by sea and road - Technical and economical environmental factors

    DEFF Research Database (Denmark)

    Kristensen, Hans Otto Holmegaard

    2006-01-01

    This paper presents the background for a method of calculating the energy demand for different ship types using only a relatively few, but important parameters. It is an empirical method, based on a statistical analysis of the main parameters of different ship types in order to establish represen......This paper presents the background for a method of calculating the energy demand for different ship types using only a relatively few, but important parameters. It is an empirical method, based on a statistical analysis of the main parameters of different ship types in order to establish......)). >> By combining the statistical analysis with a subsequent power prediction, it has been possible to develop a method which can calculate the energy consumption as a function of only 3 general parameters, namely the size of the ship (more precisely the capacity), the ship's speed and the average cargo utilization...

  15. 46 CFR 153.283 - Valving for cargo piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Valving for cargo piping. 153.283 Section 153.283... CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Design and Equipment Piping Systems and Cargo Handling Equipment § 153.283 Valving for cargo piping. (a) Except as described in...

  16. 46 CFR 154.1844 - Cargo tanks: Filling limits.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo tanks: Filling limits. 154.1844 Section 154.1844... STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Operations § 154.1844 Cargo tanks... cargo tank is not loaded: (1) More than 98 percent liquid full; or (2) In excess of the...

  17. 46 CFR 151.15-10 - Cargo gauging devices.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo gauging devices. 151.15-10 Section 151.15-10... CARRYING BULK LIQUID HAZARDOUS MATERIAL CARGOES Tanks § 151.15-10 Cargo gauging devices. This section contains definitions and requirements for types of gauging devices specified in Table 151.05. (a)...

  18. 46 CFR 151.50-5 - Cargoes having toxic properties.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargoes having toxic properties. 151.50-5 Section 151.50... BARGES CARRYING BULK LIQUID HAZARDOUS MATERIAL CARGOES Special Requirements § 151.50-5 Cargoes having... transporting liquids having a Reid vapor pressure exceeding 14 pounds per square inch absolute or vented at...

  19. 46 CFR 98.25-55 - Cargo piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Cargo piping. 98.25-55 Section 98.25-55 Shipping COAST... Cargo piping. (a) Piping shall be of seamless steel meeting the requirements of § 56.60-1 of subchapter F (Marine Engineering) of this chapter. The piping shall be of not less than Schedule 40...

  20. 46 CFR 151.20-10 - Cargo system instrumentation.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo system instrumentation. 151.20-10 Section 151.20-10 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES... instrumentation. (a) Each tank operated at other than ambient temperature shall be provided with at least...

  1. Sustaining the Single Naval Battle: Enhancing USMC Expeditionary Logistics with the Addition of the Maritime Prepositioning Force (MPF) Auxiliary Dry Cargo / Ammunition Ships (T-AKES)

    Science.gov (United States)

    2012-04-18

    Anderson, Duncan. The Falklands War 1982 ( Great Britain: Osprey Publishing, 2002), 48. 71 Steven Gorton, "Thoughts on the Falkland Island War...MLA) and Sustainment Training Package (STP)) Meals Ready to Eat (MREs) are devided between the LHD-l, LHA-l, LPD-4 and LPD-17 class ships in...War 1982. Great Britain: Osprey Publishing, 2002. Button, Robert and National Defense Research Institute. Maritime Pre positioning Force (Future

  2. 46 CFR 153.1000 - Special operating requirements for cargoes reactive with water.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Special operating requirements for cargoes reactive with water. 153.1000 Section 153.1000 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED... MATERIALS Operations Special Cargo Procedures § 153.1000 Special operating requirements for cargoes...

  3. 46 CFR 32.50-3 - Cargo discharge-TB/ALL.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Cargo discharge-TB/ALL. 32.50-3 Section 32.50-3 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS SPECIAL EQUIPMENT, MACHINERY, AND HULL REQUIREMENTS Pumps, Piping, and Hose for Cargo Handling § 32.50-3 Cargo discharge—TB/ALL. (a) Pumps or other...

  4. 46 CFR 308.521 - Application for Open Cargo Policy, Form MA-301.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 8 2010-10-01 2010-10-01 false Application for Open Cargo Policy, Form MA-301. 308.521 Section 308.521 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR... for Open Cargo Policy, Form MA-301. The standard form of application for a War Risk Open Cargo...

  5. The shipping man adventures in ship finance

    CERN Document Server

    McCleery, Matthew

    2013-01-01

    When restless New York City hedge fund manager Robert Fairchild watches the Baltic Dry Cargo Index plunge 97%, registering an all-time high and a 25-year low within the span of just six months, he decides to buy a ship. Immediately fantasizing about naming a vessel after his wife, carrying a string of worry beads and being able to introduce himself as a "shipowner" at his upcoming college reunion, Fairchild immediately embarks on an odyssey into the most exclusive, glamorous and high stakes business in the world. From pirates off the coast of Somalia and on Wall Street to Greek and Norwegian shipping magnates, the education of Robert Fairchild is an expensive one. In the end, he loses his hedge fund, but he gains a life - as a Shipping Man. Part fast paced financial thriller, part ship finance text book, The Shipping Man is 310 pages of required reading for anyone with an interest in capital formation for shipping.

  6. 46 CFR 153.436 - Heat transfer fluids: compatibility with cargo.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Heat transfer fluids: compatibility with cargo. 153.436... Equipment Cargo Temperature Control Systems § 153.436 Heat transfer fluids: compatibility with cargo. A heat transfer fluid separated from the cargo by only one wall (for example, the heat transfer fluid in a...

  7. 46 CFR 30.10-5a - Cargo area-TB/ALL.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Cargo area-TB/ALL. 30.10-5a Section 30.10-5a Shipping... Cargo area—TB/ALL. The term cargo area means that part of a vessel that includes the cargo tanks and..., all intervening space within, between, below, or outboard of these tanks or holds, and the deck area...

  8. 46 CFR 151.45-7 - Shipping papers.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Shipping papers. 151.45-7 Section 151.45-7 Shipping... BULK LIQUID HAZARDOUS MATERIAL CARGOES Operations § 151.45-7 Shipping papers. Each barge carrying... towing vessel shall either have a copy of the shipping papers for each barge in his tow or he shall...

  9. American Recovery and Reinvestment Act ( ARRA) FEMP Technical Assistance, U.S. General Services Administration - Project 194 U.S. Custom Cargo Inspection Facility, Detroit, MI

    Energy Technology Data Exchange (ETDEWEB)

    Arends, J.; Sandusky, William F.

    2010-05-31

    This report documents the findings of an on-site audit of the U.S. Customs Cargo Inspection Facility (CIF) in Detroit, Michigan. The federal landlord for this building is the General Services Administration (GSA). The focus of the audit was to identify various no-cost or low-cost energy-efficiency opportunities that, once implemented, would reduce electrical and gas consumption and increase the operational efficiency of the building. This audit also provided an opportunity to identify potential capital cost projects that should be considered in the future to acquire additional energy (electric and gas) and water savings to further increase the operational efficiency of the building.

  10. Altimetry, ship gravimetry, and the general circulation of the North Atlantic

    Science.gov (United States)

    Zlotnicki, Victor; Marsh, James G.

    1989-01-01

    Gravity accelerations estimated from satellite altimetric mean sea surfaces (Seasat and Geos-3) are compared to ship gravity measurements. Ship gravity are closer to an estimate based on least squares collocation, orbit perturbations, altimetry and terrestrial gravity than to an estimate based on Fourier transforms, orbit perturbations and altimetry only. Both altimetric estimates yield a smoothed picture of the geostrophic component of sea surface currents in the North Atlantic when gravity acceleration data from only nine cruises are subtracted from the altimetric gravity.

  11. Ship Lock as General Queuing System with Batch Arrivals and Batch Service

    Directory of Open Access Journals (Sweden)

    Zoran Radmilović

    2007-11-01

    Full Text Available The real lock operations with ships and barge convoys areconsidered dependent on the transport technologies applied, ormore precisely, the kinds of ships/convoys requiring thelockage. The fleet can be divided as follows: (1 groups of singleships, (2 pushed and pulled tows of barges and (3 differentcombinations of previous systems (1 and (2. The groups ofships and tows passing through the lock have extremely stochasticcharacteristics thus forming various arrivals and setvicetime patterns. It means that uniform navigation or strongscheduling between locks and lock operations are not possibleeven though highly sophisticated equipment is at disposal.Therefore, in this paper an analytical method was developedusing bulk queuing systems for the analysis and planning oflock requirements supporting it with numerical example. Thedeveloped methodology can be applied to determine the meanqueue length of ships - convoys at lock anchorage, withoutblocking behaviour between upstream and downstream navigationfor single-lane traffic.

  12. DACC program cost and work breakdown structure-dictionary. General purpose aft cargo carrier study, volume 2

    Science.gov (United States)

    1985-01-01

    Results of detailed cost estimates and economic analysis performed on the updated 201 configuration of the dedicated Aft Cargo Carrier (DACC) are given. The objective of this economic analysis is to provide the National Aeronautics and Space Administration (NASA) with information on the economics of using the DACC on the Space Transportation System (STS). The detailed cost estimates for the DACC are presented by a work breakdown structure (WBS) to ensure that all elements of cost are considered in the economic analysis and related subsystem trades. Costs reported by WBS provide NASA with a basis for comparing competing designs and provide detailed cost information that can be used to forecast phase C/D planning for new projects or programs derived from preliminary conceptual design studies. The scope covers all STS and STS/DACC launch vehicle cost impacts for delivering an orbital transfer vehicle to a 120 NM low Earth orbit (LEO).

  13. A Base Integer Programming Model and Benchmark Suite for Liner-Shipping Network Design

    DEFF Research Database (Denmark)

    Brouer, Berit Dangaard; Alvarez, Fernando; Plum, Christian Edinger Munk

    2014-01-01

    sources of liner shipping for OR researchers in general. We describe and analyze the liner-shipping domain applied to network design and present a rich integer programming model based on services that constitute the fixed schedule of a liner shipping company. We prove the liner-shipping network design...... problem to be strongly NP-hard. A benchmark suite of data instances to reflect the business structure of a global liner shipping network is presented. The design of the benchmark suite is discussed in relation to industry standards, business rules, and mathematical programming. The data are based on real......The liner-shipping network design problem is to create a set of nonsimple cyclic sailing routes for a designated fleet of container vessels that jointly transports multiple commodities. The objective is to maximize the revenue of cargo transport while minimizing the costs of operation...

  14. A Review of Cargo Handling Equipment

    Science.gov (United States)

    1971-10-01

    surge, and sway). If, for example, only heave compensation is employed, i.e., one constraint, then the cargo may swing in a pendulous manner and the...pendulous mass as well as lack of heave compensation . One proposed method for overcoming the heave compensation problem is to tie the helicopter to the...deck. Further, any method which does not use the ship as a reference (i.e., not mounted on the ship) must also provide for some type of heave

  15. Heterogeneous port traffic of general ships and seaplanes and its simulation

    NARCIS (Netherlands)

    Zhou, Y.; Weng, J.; Daamen, W.; Hoogendoorn, S.P.; Vellinga, T.

    2014-01-01

    Along with the development of the civil seaplane industry in China and all around the world, the number of seaplane piers in port areas will increase. As a consequence, the port traffic will not only increase, it will also become more heterogeneous, consisting of ships and seaplanes. This paper pres

  16. Design and Inspection of Liquid Cargo Piping of Chemical Tanker

    Institute of Scientific and Technical Information of China (English)

    Ying Sheng; Jiang Chengsong

    2012-01-01

    There is a great variety of liquid chemicals, and many shipowners are not clear about the cargos their ships will carry at the early stage of the design and construction of chemical tankers. In addition, because of the inclination to choose low cost construction material due to cost concern, the sources of cargos that ships can carry are greatly limited and the operation efficiency will be influenced. What should we do to avoid such situations?

  17. 46 CFR 154.195 - Aluminum cargo tank: Steel enclosure.

    Science.gov (United States)

    2010-10-01

    ... published in “Rules for Building and Classing Steel Vessels”, 1981. (c) The steel cover for the aluminum... 46 Shipping 5 2010-10-01 2010-10-01 false Aluminum cargo tank: Steel enclosure. 154.195 Section... CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Design, Construction...

  18. 46 CFR 154.548 - Cargo piping: Flow capacity.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo piping: Flow capacity. 154.548 Section 154.548... and Process Piping Systems § 154.548 Cargo piping: Flow capacity. Piping with an excess flow valve must have a vapor or liquid flow capacity that is greater than the rated closing flow under § 154.546....

  19. 46 CFR 154.1850 - Entering cargo handling spaces.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Entering cargo handling spaces. 154.1850 Section 154... cargo handling spaces. (a) The master shall ensure that the ventilation system under § 154.1200 is in... handling equipment. (b) The master shall ensure that a warning sign listing the requirement for use of the...

  20. Ciguatera fish poisoning in industrial ship crewmembers: a retrospective study in a seaport general practice in Trinidad and Tobago.

    Science.gov (United States)

    Poon-King, C M; Chen, A; Poon-King, T

    2004-09-01

    The objective of this study was to outline the epidemiology of Ciguatera fish poisoning as seen in a general practice serving two industrial seaports in Trinidad and Tobago, in order to highlight the potential public health implications. A retrospective study was undertaken of all the cases of Ciguatera fish poisoning identified between November 1, 1992 and October 31, 1998 in a seaport general practice to identify signs, symptoms and treatment. An investigation of one outbreak was undertaken. Four outbreaks affecting 42 male ship crewmembers were identified. The suspect fish were caught in northern Caribbean waters en route to Trinidad and Tobago. The most common early symptoms were diarrhoea, vomiting, abdominal cramps, pruritus and tiredness. In the third outbreak, dysaesthesia was common. Progression to muscular weakness, ataxic gait, unsteadiness and other neurotoxic signs were seen in moderate to severe disease. Hypotension was an important prognostic sign in the initial case. Treatment was symptomatic and supportive and included vitamins B12 and BCO, folic acid, prostigmine, steroids and antihistamines as indicated. In the investigation of the second outbreak, the relative risk of 'eating fish meat' was 5 (95% CI 1.45, 17.27, p ciguatera fish poisoning.' All cases were industrial ship crewmembers. It is suggested that increased clinician awareness with early and appropriate treatment, and focussed public health intervention may help limit the potential public health impact of ciguatera poisoning in industrial ship crewmembers and other fish-consuming communities in the future.

  1. 46 CFR 150.130 - Loading a cargo on vessels carrying cargoes with which it is incompatible.

    Science.gov (United States)

    2010-10-01

    ... it is incompatible. 150.130 Section 150.130 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY... carrying cargoes with which it is incompatible. Except as described in § 150.160, the person in charge of a... any cargo in table I with which it is incompatible by two barriers such as formed by a: (1)...

  2. 75 FR 63192 - Intent To Request Renewal From OMB of One Current Public Collection of Information: Air Cargo...

    Science.gov (United States)

    2010-10-14

    ... qualified to ship cargo on passenger aircraft, also referred to as ``known shippers.'' This information is primarily collected electronically via the Known Shipper Management System (KSMS). Whenever the information... Collection of Information: Air Cargo Security Requirements AGENCY: Transportation Security Administration...

  3. 46 CFR 154.650 - Cargo tank and process pressure vessel welding.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo tank and process pressure vessel welding. 154.650... Equipment Construction § 154.650 Cargo tank and process pressure vessel welding. (a) Cargo tank and process pressure vessel welding must meet Subpart 54.05 and Part 57 of this chapter. (b) Welding consumables...

  4. 46 CFR 153.935 - Opening of tanks and cargo sampling.

    Science.gov (United States)

    2010-10-01

    ..., except: (1) To clean a tank; (2) To transfer a cargo that Table 1 allows in a containment system having... 46 Shipping 5 2010-10-01 2010-10-01 false Opening of tanks and cargo sampling. 153.935 Section 153... Vessel Safety § 153.935 Opening of tanks and cargo sampling. (a) Except as provided in paragraph (b)...

  5. 46 CFR 154.706 - Cargo boil-off as fuel: Fuel lines.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo boil-off as fuel: Fuel lines. 154.706 Section 154... Equipment Cargo Pressure and Temperature Control § 154.706 Cargo boil-off as fuel: Fuel lines. (a) Gas fuel lines must not pass through accommodation, service, or control spaces. Each gas fuel line...

  6. 46 CFR 38.10-10 - Cargo piping-TB/ALL.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Cargo piping-TB/ALL. 38.10-10 Section 38.10-10 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS LIQUEFIED FLAMMABLE GASES Piping, Valves, Fittings, and Accessory Equipment § 38.10-10 Cargo piping—TB/ALL. (a) The piping shall be designed for...

  7. 46 CFR 153.602 - Special requirements for cargoes reactive with water.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Special requirements for cargoes reactive with water. 153.602 Section 153.602 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK... and Equipment Special Requirements § 153.602 Special requirements for cargoes reactive with...

  8. 46 CFR 153.981 - Leaving room in tank for cargo expansion.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Leaving room in tank for cargo expansion. 153.981 Section 153.981 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS... Transfer Procedures § 153.981 Leaving room in tank for cargo expansion. The person in charge of...

  9. 46 CFR 308.523 - Application for revision of Open Cargo Policy, Form MA-303.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 8 2010-10-01 2010-10-01 false Application for revision of Open Cargo Policy, Form MA-303. 308.523 Section 308.523 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY... Application for revision of Open Cargo Policy, Form MA-303. An application for the revision of an Open...

  10. 46 CFR 308.548 - Standard form of underwriting agency agreement for cargo, Form MA-318.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 8 2010-10-01 2010-10-01 false Standard form of underwriting agency agreement for cargo, Form MA-318. 308.548 Section 308.548 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... underwriting agency agreement for cargo, Form MA-318. This form, which may be obtained from the American...

  11. 46 CFR 308.545 - Facultative cargo policy, Form MA-316.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 8 2010-10-01 2010-10-01 false Facultative cargo policy, Form MA-316. 308.545 Section 308.545 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK... policy, Form MA-316. The standard form of War Risk Facultative Cargo Policy, Form MA-316, may be...

  12. 46 CFR 153.430 - Heat transfer systems; general.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Heat transfer systems; general. 153.430 Section 153.430... Temperature Control Systems § 153.430 Heat transfer systems; general. Each cargo cooling system required by... separated from all other cooling and heating systems; and (c) Allow manual regulation of the system's...

  13. Review of Department of the Navy, Judge Advocate General’s Surface Ship Fire Investigation Reports for the Period 1980 through 1986

    Science.gov (United States)

    1989-12-26

    Mar 79 Switchboard 2. 438-80 Shenandoah AD26 Fire in Paint Room 19 May 79 3. 626-80 Conyngham DDG 17 Four Arson Fires 12-14 Jul 78 4. 920-80 Paul...as TAFES) TECHEVAL - Technical Evaluation XO - Executive Officer XRAY - Watertight condition of a ship. Usually set at night. 96 YOKE - Watertight...condition of a ship (more than XRAY , less than ZEBRA). ZEBRA - Most watertight condition of a ship. Usually set with General Quarters. II. SPACE

  14. The National Shipbuilding Research Program. Guide to International Approval Processes for Commercial Ship Construction. Volume 1

    Science.gov (United States)

    1997-10-01

    10.1.3.1 Number and diameter of fire hoses 10.1.3.2 Specification of hoses 10.1.4 Nozzles 10.2 General requirements of fixed gas fire -extinguishing...systems 10.2.1 Closing appliances for fixed gas fire -extinguishing systems 10.3 Portable fire extinguishers 10.3.1 Types and designs 10.3.2...detection and fire alarm systems in cargo ships 10.6 Fire-extinguishing arrangements in cargo spaces 10.6.1 Fixed gas fire -extinguishing systems in

  15. Routing and Scheduling in Tramp Shipping - Integrating Bunker Optimization

    DEFF Research Database (Denmark)

    Vilhelmsen, Charlotte; Lusby, Richard Martin; Larsen, Jesper

    A tramp ship operator typically has some contracted cargoes that must be carried and seeks to maximize proFIt by carrying optional cargoes. Hence, tramp ships operate much like taxies following available cargoes and not according to a fixed route network and itinerary as liner ships. Marine fuel...... is referred to as bunker and bunker costs constitute a significant part of the daily operating costs. There can be great variations in bunker prices across bunker ports so it is important to carefully plan bunkering for each ship. As ships operate 24 hours a day, they must refuel during operations. Therefore...... of which cargoes to carry and on which ships is affected by the bunker integration and by changes in the bunker prices....

  16. Routing and Scheduling in Tramp Shipping - Integrating Bunker Optimization

    DEFF Research Database (Denmark)

    Vilhelmsen, Charlotte; Lusby, Richard Martin; Larsen, Jesper

    A tramp ship operator typically has some contracted cargoes that must be carried and seeks to maximize pro_t by carrying optional cargoes. Hence, tramp ships operate much like taxies following available cargoes and not according to a _xed route network and itinerary as liner ships. Marine fuel...... is referred to as bunker fuel or simply bunker and bunker costs constitute a signi_cant part of the daily operating costs. There can be great variations in bunker prices across bunker ports so it is important to carefully plan bunkering for each ship. As ships operate 24 hours a day, they must refuel during......?ts and that the decision of which cargoes to carry and on which ships is affected by the bunker integration and by changes in the bunker prices....

  17. A matheuristic for the liner shipping network design problem

    DEFF Research Database (Denmark)

    Brouer, Berit Dangaard; Desaulniers, Guy

    2012-01-01

    We present a matheuristic, an integer programming based heuristic, for the Liner Shipping Network Design Problem. The heuristic applies a greedy construction heuristic based on an interpretation of the liner shipping network design problem as a multiple quadratic knapsack problem. The construction...... for revenue and transshipment of cargo along with in/decrease of vessel- and operational cost for the current solution. The evaluation functions may be used by heuristics in general to evaluate changes to a network design without solving a large scale multicommodity flow problem....... heuristic is combined with an improvement heuristic with a neighborhood defined by the solution space of a mixed integer program. The mixed integer program optimizes the removal and insertion of several port calls on a liner shipping service. The objective function is based on evaluation functions...

  18. 49 CFR 173.318 - Cryogenic liquids in cargo tanks.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Cryogenic liquids in cargo tanks. 173.318 Section... REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Gases; Preparation and Packaging § 173.318 Cryogenic liquids in cargo tanks. (a) General requirements. (1) A cargo tank may not be loaded with a cryogenic liquid colder than...

  19. 46 CFR 38.05-3 - Design and construction of pressure vessel type cargo tanks-TB/ALL.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Design and construction of pressure vessel type cargo... LIQUEFIED FLAMMABLE GASES Design and Installation § 38.05-3 Design and construction of pressure vessel type cargo tanks—TB/ALL. (a) Cargo tanks of pressure vessel configuration (e.g. cylindrical, spherical,...

  20. 33 CFR 401.32 - Cargo booms-deck cargo.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Cargo booms-deck cargo. 401.32... OF TRANSPORTATION SEAWAY REGULATIONS AND RULES Regulations Seaway Navigation § 401.32 Cargo booms—deck cargo. (a) Every vessel shall have cargo booms secured in a manner that affords maximum...

  1. Full Scale Measurements of the Hydro-Elastic Response of Large Container Ships for Decision Support

    DEFF Research Database (Denmark)

    Andersen, Ingrid Marie Vincent

    and slender bow and stern sections) and their normal cargo loading condition, container ships are typically operated in a still-water hogging condition (tension in deck and compression in the bottom structure). The wave-induced bending moment is added to the still-water bending moment, which, together...... ships with focus on the assessment of the influence of the wave-induced high-frequency hull girder vibrations. In several cases, the high-frequency contribution to the fatigue damage is dominating the estimated fatigue damage. Spectral formulations for estimating fatigue damage from bi-modal processes...... with the smaller design hogging bending moment, generally makes the wave-induced hogging bending moment more critical than the sagging bending moment in the operation of container ships. As container ships of today become larger, their natural vibration frequencies become lower and approach the typical encounter...

  2. Scatter in cargo radiography.

    Science.gov (United States)

    Miller, Erin A; Caggiano, Joseph A; Runkle, Robert C; White, Timothy A; Bevill, Aaron M

    2011-03-01

    As a complement to passive detection systems, radiographic inspection of cargo is an increasingly important tool for homeland security because it has the potential to detect highly attenuating objects associated with special nuclear material or surrounding shielding, in addition to screening for items such as drugs or contraband. Radiographic detection of such threat objects relies on high image contrast between regions of different density and atomic number (Z). Threat detection is affected by scatter of the interrogating beam in the cargo, the radiographic system itself, and the surrounding environment, which degrades image contrast. Here, we estimate the extent to which scatter plays a role in radiographic imaging of cargo containers. Stochastic transport simulations were performed to determine the details of the radiography equipment and surrounding environment, which are important in reproducing measured data and to investigate scatter magnitudes for typical cargo. We find that scatter plays a stronger role in cargo radiography than in typical medical imaging scenarios, even for low-density cargo, with scatter-to-primary ratios ranging from 0.14 for very low density cargo, to between 0.20 and 0.40 for typical cargo, and higher yet for dense cargo.

  3. SEASAT economic assessment. Volume 9: Ports and harbors case study and generalization. [economic benefits of SEASAT satellites to harbors and shipping industries through improved weather forecasting

    Science.gov (United States)

    1975-01-01

    This case study and generalization quantify benefits made possible through improved weather forecasting resulting from the integration of SEASAT data into local weather forecasts. The major source of avoidable economic losses to shipping from inadequate weather forecasting data is shown to be dependent on local precipitation forecasting. The ports of Philadelphia and Boston were selected for study.

  4. Cargo recognition and cargo-mediated regulation of unconventional myosins.

    Science.gov (United States)

    Lu, Qing; Li, Jianchao; Zhang, Mingjie

    2014-10-21

    Organized motions are hallmarks of living organisms. Such motions range from collective cell movements during development and muscle contractions at the macroscopic scale all the way down to cellular cargo (e.g., various biomolecules and organelles) transportation and mechanoforce sensing at more microscopic scales. Energy required for these biological motions is almost invariably provided by cellular chemical fuels in the form of nucleotide triphosphate. Biological systems have designed a group of nanoscale engines, known as molecular motors, to convert cellular chemical fuels into mechanical energy. Molecular motors come in various forms including cytoskeleton motors (myosin, kinesin, and dynein), nucleic-acid-based motors, cellular membrane-based rotary motors, and so on. The main focus of this Account is one subfamily of actin filament-based motors called unconventional myosins (other than muscle myosin II, the remaining myosins are collectively referred to as unconventional myosins). In general, myosins can use ATP to fuel two types of mechanomotions: dynamic tethering actin filaments with various cellular compartments or structures and actin filament-based intracellular transport. In contrast to rich knowledge accumulated over many decades on ATP hydrolyzing motor heads and their interactions with actin filaments, how various myosins recognize their specific cargoes and whether and how cargoes can in return regulate functions of motors are less understood. Nonetheless, a series of biochemical and structural investigations in the past few years, including works from our own laboratory, begin to shed lights on these latter questions. Some myosins (e.g., myosin-VI) can function both as cellular transporters and as mechanical tethers. To function as a processive transporter, myosins need to form dimers or multimers. To be a mechanical tether, a monomeric myosin is sufficient. It has been shown for myosin-VI that its cellular cargo proteins can play critical roles

  5. Process Analysis in Container Shipping Network Structure Form Change

    Directory of Open Access Journals (Sweden)

    Chen Chao

    2012-03-01

    Full Text Available Being aimed at the influence of ship-size and cargo-demand changes on container shipping networks, to reveal the evolution process of container shipping networks structure form, this paper respectively designed the operation models for two major container shipping networks structure forms: Multi-port-calling network and Hub-and-spoke network, to maximizing the investment efficiency. Based on the above models, a comprehensively integrated operation model of container shipping networks is built and the evolution process of container shipping networks structure form with changing of both ship-size and cargo demands is analyzed. Finally, through a case study, results show that the comprehensive integrated operation model is very effective in the analysis of evolution process of container shipping networks structure forms.

  6. Ship Observations - VOS and Navy

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Combination of Voluntary Observing Ship (VOS) and US Navy Ship weather observations. Obs generally taken 2-4 times daily at 00, 06, 12, and 18z.

  7. Travelers' Health: Cruise Ship Travel

    Science.gov (United States)

    ... Water Disinfection Infographics for Travelers MERS Health Advisory poster Food and Water: What's Safer Health Advisory: MERS ... cruise ships can vary widely depending on ship size, itinerary, length of cruise, and passenger demographics. Generally, ...

  8. 77 FR 24506 - Extension of Agency Information Collection Activity Under OMB Review: Air Cargo Security...

    Science.gov (United States)

    2012-04-24

    ... IACs have qualified to ship cargo on passenger aircraft. This information is primarily collected electronically via the Known Shipper Management System (KSMS). Whenever the information cannot be entered into... SECURITY [Transportation Security Administration Extension of Agency Information Collection Activity Under...

  9. FIRST OF ITS KIND:THE PARA GON TERMINALIN AMSTERDAM A Terminal That Can Handle Cargo on Both Sides of a Container Ship%阿姆斯特丹港的PARAGON码头

    Institute of Scientific and Technical Information of China (English)

    刘有钟

    2001-01-01

    @@ The Paragon Terminal constructed by CERES Terminal and Stevedores Inc. of the USA will be completed in July 2001. This dock-type terminal (or to be called indented berth, or slip berth)can enable simultaneous handling of containers on both the portside and the starboard side of a huge container ship. Therefore it can suit the container transport development in this new century.

  10. 46 CFR 308.524 - Application for cancellation of Open Cargo Policy, Form MA-304.

    Science.gov (United States)

    2010-10-01

    ... MA-304. 308.524 Section 308.524 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... § 308.524 Application for cancellation of Open Cargo Policy, Form MA-304. The standard form of application for cancellation of an Open Cargo Policy Form MA-304 may be obtained from the American War...

  11. 46 CFR 154.1710 - Exclusion of air from cargo tank vapor spaces.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Exclusion of air from cargo tank vapor spaces. 154.1710... Operating Requirements § 154.1710 Exclusion of air from cargo tank vapor spaces. When a vessel is carrying acetaldehyde, butadiene, ethylene oxide, or vinyl chloride, the master shall ensure that air is: (a)...

  12. 46 CFR 154.1210 - Hold space, void space, cofferdam, and spaces containing cargo piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Hold space, void space, cofferdam, and spaces containing... Design, Construction and Equipment Cargo Area: Mechanical Ventilation System § 154.1210 Hold space, void space, cofferdam, and spaces containing cargo piping. (a) Each hold space, void space, cofferdam,...

  13. COMPARISON BETWEEN FORMULAS OF MAXIMUM SHIP SQUAT

    Directory of Open Access Journals (Sweden)

    PETRU SERGIU SERBAN

    2016-06-01

    Full Text Available Ship squat is a combined effect of ship’s draft and trim increase due to ship motion in limited navigation conditions. Over time, researchers conducted tests on models and ships to find a mathematical formula that can define squat. Various forms of calculating squat can be found in the literature. Among those most commonly used are of Barrass, Millward, Eryuzlu or ICORELS. This paper presents a comparison between the squat formulas to see the differences between them and which one provides the most satisfactory results. In this respect a cargo ship at different speeds was considered as a model for maximum squat calculations in canal navigation conditions.

  14. Multipurpose Cargo Transfer Bag

    Science.gov (United States)

    Broyan, James; Baccus, Shelley

    2014-01-01

    The Logistics Reduction (LR) project within the Advanced Exploration Systems (AES) program is tasked with reducing logistical mass and repurposing logistical items. Multipurpose Cargo Transfer Bags (MCTB) have been designed such that they can serve the same purpose as a Cargo Transfer Bag, the suitcase-shaped common logistics carrying bag for Shuttle and the International Space Station. After use as a cargo carrier, a regular CTB becomes trash, whereas the MCTB can be unzipped, unsnapped, and unfolded to be reused. Reuse ideas that have been investigated include partitions, crew quarters, solar radiation storm shelters, acoustic blankets, and forward osmosis water processing.

  15. Air Cargo Security

    Science.gov (United States)

    2007-07-30

    passenger and all-cargo aircraft. The air cargo system consists of a large, complex distribution network linking manufacturers and shippers to freight...free transportation to San Jose, California. His only luggage was a guitar case that concealed hammers, mallets, a knife, and a spear gun. At the...authorities and airplane manufacturers study methods to mitigate the effects of in-flight explosions.76 The FAA has had a active research program in blast

  16. 46 CFR 32.50-1 - Cargo pumps for tank vessels constructed on or after November 10, 1936-TB/ALL.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Cargo pumps for tank vessels constructed on or after... TANK VESSELS SPECIAL EQUIPMENT, MACHINERY, AND HULL REQUIREMENTS Pumps, Piping, and Hose for Cargo Handling § 32.50-1 Cargo pumps for tank vessels constructed on or after November 10, 1936—TB/ALL. On...

  17. 46 CFR 32.50-25 - Cargo pumps and piping on tank vessels constructed prior to November 10, 1936-TB/ALL.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Cargo pumps and piping on tank vessels constructed prior... SECURITY TANK VESSELS SPECIAL EQUIPMENT, MACHINERY, AND HULL REQUIREMENTS Pumps, Piping, and Hose for Cargo Handling § 32.50-25 Cargo pumps and piping on tank vessels constructed prior to November 10,...

  18. Measuring SO2 ship emissions with an ultraviolet imaging camera

    Science.gov (United States)

    Prata, A. J.

    2014-05-01

    Over the last few years fast-sampling ultraviolet (UV) imaging cameras have been developed for use in measuring SO2 emissions from industrial sources (e.g. power plants; typical emission rates ~ 1-10 kg s-1) and natural sources (e.g. volcanoes; typical emission rates ~ 10-100 kg s-1). Generally, measurements have been made from sources rich in SO2 with high concentrations and emission rates. In this work, for the first time, a UV camera has been used to measure the much lower concentrations and emission rates of SO2 (typical emission rates ~ 0.01-0.1 kg s-1) in the plumes from moving and stationary ships. Some innovations and trade-offs have been made so that estimates of the emission rates and path concentrations can be retrieved in real time. Field experiments were conducted at Kongsfjord in Ny Ålesund, Svalbard, where SO2 emissions from cruise ships were made, and at the port of Rotterdam, Netherlands, measuring emissions from more than 10 different container and cargo ships. In all cases SO2 path concentrations could be estimated and emission rates determined by measuring ship plume speeds simultaneously using the camera, or by using surface wind speed data from an independent source. Accuracies were compromised in some cases because of the presence of particulates in some ship emissions and the restriction of single-filter UV imagery, a requirement for fast-sampling (> 10 Hz) from a single camera. Despite the ease of use and ability to determine SO2 emission rates from the UV camera system, the limitation in accuracy and precision suggest that the system may only be used under rather ideal circumstances and that currently the technology needs further development to serve as a method to monitor ship emissions for regulatory purposes. A dual-camera system or a single, dual-filter camera is required in order to properly correct for the effects of particulates in ship plumes.

  19. Installation of the Canadian Muon Cargo Inspection System at CRL

    Science.gov (United States)

    2014-04-01

    Installation of the Canadian Muon Cargo Inspection System at CRL Prepared by: Guy Jonkmans Atomic Energy of Canada Limited Chalk River ON...INSTALLATION OF THE CANADIAN MUON CARGO INSPECTION SYSTEM AT CRL 153-30100-REPT-001 Revision 0 2013/02/19 UNRESTRICTED 2013/02/19 ILLIMITÉ 153...30100-REPT-001 2013/02/19 Report, General Installation of the Canadian Muon Cargo Inspection System at CRL Research and Development 153-30100

  20. Ageing of ships, LPG tankers

    OpenAIRE

    Ask, Martin

    2015-01-01

    During the last decades there have been several major ship accidents, and it is believed that old ships are more unsafe than newer ships. To get a better understanding of this phenomenon the thesis is investigating different issues with ship ageing. This thesis consists of a general description of the most important ageing issues, and the condition of sea water ballast tanks is identified as one of the most critical issue regarded to ageing on LPG-tankers. This investigation consists of...

  1. Holistic control of ship noise emissions

    OpenAIRE

    Borelli Davide; Gaggero Tomaso; Rizzuto Enrico; Schenone Corrado

    2016-01-01

    The sustainability of anthropogenic activities at sea is recently gaining more and more attention. As regards shipping, emissions from ships into the environment of various nature (engine exhaust gases, anti-fouling paints leaching, ballast exchange, releases at sea of oil and other noxious liquid or solid cargoes, of sewage and of garbage) have been recognized as sources of pollution and therefore controlled and limited since a long time. The subject of noise emission...

  2. ASPECTS RELATED TO THE PROPULSION HYDRAFOIL SHIPS

    Directory of Open Access Journals (Sweden)

    Levent ALI

    2016-12-01

    Full Text Available In this paper, we analyze some aspects related to the propulsion of hydrofoil ships. They are very important for the success of the mission if they are military ships and for cargo security, if they are civilian transport ships, especially when navigating at high speed on their hydrofoil wings in rough sea conditions. This paper presents an original procedure for estimating the propulsion of hydrofoil ships. This procedure has enabled the development of a computer program that can predict both those types of ship propulsion regime imposed at a quasi-stationary speed and the march regime on wings. The calculation software obtained may serve to design any type of hydrofoil ship.

  3. Vertical Ship Motion Study for Savannah, GA Entrance Channel

    Science.gov (United States)

    2011-09-01

    Theory ........................................................................................................................ 36  3.1  PIANC squat...rolling. Static equilibrium is based on the Archimedes Principle where the weight W of the ship and cargo is balanced by the weight B of the water...ship motion heave, pitch, and roll RAOs are calculated using a frequency-domain, shallow water, strip- theory program SCORES (Kaplan 1996a & b). In a

  4. Journeys on the Rivers and Oceans: Ship Transportation

    Science.gov (United States)

    Ritz, John M.; Carper, Susan

    2008-01-01

    Ship transportation includes various forms of technology. Ships have special designs to meet technological needs. They are used to transport people and cargoes and have been a major part of history throughout civilization. Products are available from around the world because they can be economically moved from producers to consumers. Not only are…

  5. MELTER: A model of the thermal response of cargos transported in the Safe-Secure Trailer subject to fire environments for risk assessment applications

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, M.E.

    1994-08-01

    MELTER is an analysis of cargo responses inside a fire-threatened Safe-Secure Trailer (SST) developed for the Defense Program Transportation Risk Assessment (DPTRA). Many simplifying assumptions are required to make the subject problem tractable. MELTER incorporates modeling which balances the competing requirements of execution speed, generality, completeness of essential physics, and robustness. Input parameters affecting the analysis include those defining the fire scenario, those defining the cargo loaded in the SST, and those defining properties of the SST. For a specified fire, SST, and cargo geometry MELTER predicts the critical fire duration that will lead to a failure. The principal features of the analysis include: (a) Geometric considerations to interpret fire-scenario descriptors in terms of a thermal radiation boundary condition, (b) a simple model of the SST`s wall combining the diffusion model for radiation through optically-thick media with an endothermic reaction front to describe the charring of dimensional, rigid foam in the SST wall, (c) a transient radiation enclosure model, (d) a one-dimensional, spherical idealization of the shipped cargos providing modularity so that cargos of interest can be inserted into the model, and (e) associated numerical methods to integrate coupled, differential equations and find roots.

  6. Probabilistic Damage Stability Calculations for Ships

    DEFF Research Database (Denmark)

    Jensen, Jørgen Juncher

    1996-01-01

    The aim of these notes is to provide background material for the present probabilistic damage stability rules fro dry cargo ships.The formulas for the damage statistics are derived and shortcomings as well as possible improvements are discussed. The advantage of the definiton of fictitious...

  7. Shielding Analysis of the 5320 Shipping Cask

    Energy Technology Data Exchange (ETDEWEB)

    Blanchard, A. [Westinghouse Savannah River Company, AIKEN, SC (United States); Nathan, S. [Westinghouse Safety Management Solutions, Aiken, SC (United States)

    1998-05-01

    The purpose of this work is to demonstrate that the 5320 shipping cask meets Federal regulations for maximum radiation dose rates when loaded with the intended plutonium oxide cargo. It should be emphasized that the 5320 is an existing cask, and therefore this work represents confirmatory analysis rather than design analysis.

  8. The Human Element and Autonomous Ships

    Directory of Open Access Journals (Sweden)

    Sauli Ahvenjärvi

    2016-09-01

    Full Text Available The autonomous ship technology has become a “hot” topic in the discussion about more efficient, environmentally friendly and safer sea transportation solutions. The time is becoming mature for the introduction of commercially sensible solutions for unmanned and fully autonomous cargo and passenger ships. Safety will be the most interesting and important aspect in this development. The utilization of the autonomous ship technology will have many effects on the safety, both positive and negative. It has been announced that the goal is to make the safety of an unmanned ship better that the safety of a manned ship. However, it must be understood that the human element will still be present when fully unmanned ships are being used. The shore-based control of a ship contains new safety aspects and an interesting question will be the interaction of manned and unmanned ships in the same traffic area. The autonomous ship technology should therefore be taken into account on the training of seafarers. Also it should not be forgotten that every single control algorithm and rule of the internal decision making logic of the autonomously navigating ship has been designed and coded by a human software engineer. Thus the human element is present also in this point of the lifetime navigation system of the autonomous ship.

  9. Ship construction

    National Research Council Canada - National Science Library

    Eyres, D.J; Bruce, G.J

    2012-01-01

    .... "Acting as both a professional reference on current approaches in shipyard practice and a comprehensive introduction for students in any marine discipline, Ship Construction covers the complete...

  10. Shipping Fairways

    Data.gov (United States)

    Department of Homeland Security — Various shipping zones delineate activities and regulations for marine vessel traffic. Traffic lanes define specific traffic flow, while traffic separation zones...

  11. A matheuristic for the liner shipping network design problem

    DEFF Research Database (Denmark)

    Brouer, Berit Dangaard; Desaulniers, Guy; Pisinger, David

    We present a matheuristic, an integer programming based heuristic, for the liner shipping network design problem. This problem consists of finding a set of container shipping routes defining a capacitated network for cargo transport. The objective is to maximize the revenue of cargo transport......, while minimizing the cost of operating the network. Liner shipping companies publish a set of routes with a time schedule, and it is an industry standard to have a weekly departure at each port call on a route. A weekly frequency is achieved by deploying several vessels to a single route, respecting...

  12. Aim to International Shipping Center

    Institute of Scientific and Technical Information of China (English)

    Hu Wenxiu

    2009-01-01

    @@ Since 1990s,various countries in the world have been focusing on the construction of the key ports,leading to a fiercer competition between ports.For example,in East Asia,South Korea and Japan are rivaling for the international shipping center in Northeast Asia.Taking Busan Port and Gwangyang Port as the central ports,South Korea is boosting the ports expansion plans,to construct a"logistic center in Northeast Asia".Meanwhile.Japan is projecting the optimizmg and integration of port resources,to regain the international shipping center in Asia.The central government of China made plans for constructing Shanghai Shipping Center as early in 1996.and after 13 years'construction,now Shanghai Port has the largest cargo throughput and the second largest container throughput in the world.

  13. Liner Shipping Service Scheduling with Workshift Costs

    DEFF Research Database (Denmark)

    Reinhardt, Line Blander

    Container shipping companies are currently facing combined challenges of overcapacity and volatile fuel prices. In addition, rising concerns about greenhouse gas emissions has made it crucial for shipping companies to reduce their fuel consumption. The consumption of fuel for shipping vessel...... while ensuring that given transit time limits for the carried cargo is satisfied, and considering the layover time for containers transshipping between services. Workshift times and cost are included ensuring that changing the port visit time will not introduce an addition cost for the port operations...

  14. Multi-Criteria Optimisation of Liquid Cargo Transport According to Linguistic Approach to the Route Selection Task

    Directory of Open Access Journals (Sweden)

    Guze Sambor

    2017-04-01

    Full Text Available The main aim of the paper is to present the possibility of use of the multi-criteria optimization method Analytical Hierarchy Process (AHP to liquid cargo transportation by sea. Finding the optimal solution is not simple. There are many factors influencing the shipping process. In the case of liquid cargo, the most important thing is the safety of the crew, ship, and environment. Therefore, the Mathematical Theory of Evidence is introduced and used to determine the optimal path in terms of time and safety of transport. Moreover, the details of liquid cargo transport process are described with particular attention to ship to ship operations. Besides, the basic concept of the AHP method, steps of the algorithm are introduced. Finally, the multicriteria optimization of the transport of the liquid cargo from the Persian Gulf to Port of Gdansk is done. It is based on the experts′ opinions.

  15. Competitive Liner Shipping Network Design

    DEFF Research Database (Denmark)

    Karsten, Christian Vad

    The goal of this thesis is to develop decision support tools, which can be used to optimize container shipping networks while supporting competitive transportation services. The competitiveness of container liner shipping is to a high degree determined by transportation times and number of transs......The goal of this thesis is to develop decision support tools, which can be used to optimize container shipping networks while supporting competitive transportation services. The competitiveness of container liner shipping is to a high degree determined by transportation times and number...... shipping company earnings.The operation of the route net constitute the majority of the total costs, so it is essential to achieve a good capacity utilization in a route plan with travel times that satisfy customer requirements. Most academic articles dealing with the design of container networks neither.......The contributions of this thesis cover modeling, methodology, and applications.The developed methods address operational (cargo routing), tactical (speed optimization and service selection), and strategic (network design) planning problems faced by liner shipping companies. Ultimately, the proposed methods help...

  16. An Analysis Nomoto Gain and Norbin Parameter on Ship Turning Maneuver

    Directory of Open Access Journals (Sweden)

    Aulia Siti Aisjah

    2010-05-01

    Full Text Available First order approach of maneuvering ship model developed by Nomoto, that has commonly underpinned researchers on mathematical models of ship maneuvering, is employed by the present research in order to describe the results of Nomoto validation gain value from some type of ships. In this present study, the controls are designated using FLC, while the rules are derived from FLC; furthermore, the reference is the LQG/LTR. On the other pole, Norbin parameters are obtained under the bases of the gain and time constant output control response. Validation of Nomoto gain value is obtained through the calculation of the value of a constant gain, settling time of the first order response, and approach value toward damping ratio and natural frequency response of the system used to control the output of the second order pattern. Validation is employed on 20 types of ships with a length between 40-350 meters; as a result, it is figured out that at the Low Speed General Cargo ship, Mariner, RO/RO, and Barge Carrier have good maneuverability compared to the other 17 types of ships.

  17. Ship Hydrodynamics

    Science.gov (United States)

    Lafrance, Pierre

    1978-01-01

    Explores in a non-mathematical treatment some of the hydrodynamical phenomena and forces that affect the operation of ships, especially at high speeds. Discusses the major components of ship resistance such as the different types of drags and ways to reduce them and how to apply those principles for the hovercraft. (GA)

  18. Assessment regarding the use of the computer aided analytical models in the calculus of the general strength of a ship hull

    Science.gov (United States)

    Hreniuc, V.; Hreniuc, A.; Pescaru, A.

    2017-08-01

    Solving a general strength problem of a ship hull may be done using analytical approaches which are useful to deduce the buoyancy forces distribution, the weighting forces distribution along the hull and the geometrical characteristics of the sections. These data are used to draw the free body diagrams and to compute the stresses. The general strength problems require a large amount of calculi, therefore it is interesting how a computer may be used to solve such problems. Using computer programming an engineer may conceive software instruments based on analytical approaches. However, before developing the computer code the research topic must be thoroughly analysed, in this way being reached a meta-level of understanding of the problem. The following stage is to conceive an appropriate development strategy of the original software instruments useful for the rapid development of computer aided analytical models. The geometrical characteristics of the sections may be computed using a bool algebra that operates with ‘simple’ geometrical shapes. By ‘simple’ we mean that for the according shapes we have direct calculus relations. In the set of ‘simple’ shapes we also have geometrical entities bounded by curves approximated as spline functions or as polygons. To conclude, computer programming offers the necessary support to solve general strength ship hull problems using analytical methods.

  19. 46 CFR 154.1860 - Integral tanks: Cargo colder than −10 °C (14 °F).

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Integral tanks: Cargo colder than â10 °C (14 °F). 154.1860 Section 154.1860 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK....1860 Integral tanks: Cargo colder than −10 °C (14 °F). The master shall ensure that an integral tank...

  20. 49 CFR 180.413 - Repair, modification, stretching, rebarrelling, or mounting of specification cargo tanks.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Repair, modification, stretching, rebarrelling, or... of Cargo Tanks § 180.413 Repair, modification, stretching, rebarrelling, or mounting of specification cargo tanks. (a) General. Any repair, modification, stretching, rebarrelling, or mounting of a cargo...

  1. 14 CFR 121.287 - Carriage of cargo in cargo compartments.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Carriage of cargo in cargo compartments....287 Carriage of cargo in cargo compartments. When cargo is carried in cargo compartments that are..., the cargo must be loaded so as to allow a crewmember to effectively reach all parts of the...

  2. 14 CFR 125.185 - Carriage of cargo in cargo compartments.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Carriage of cargo in cargo compartments... Requirements § 125.185 Carriage of cargo in cargo compartments. When cargo is carried in cargo compartments... during flight, the cargo must be loaded so as to allow a crewmember to effectively reach all parts of...

  3. Test Ship

    Data.gov (United States)

    Federal Laboratory Consortium — The U. S. Navy dedicated the decommissioned Spruance Class destroyer ex-PAUL F. FOSTER (EDD 964), Test Ship, primarily for at sea demonstration of short range weapon...

  4. Arctic Shipping

    DEFF Research Database (Denmark)

    Hansen, Carsten Ørts; Grønsedt, Peter; Lindstrøm Graversen, Christian

    maritime industries (including shipping, offshore energy, ports, and maritime service and equipment suppliers) as well as addresses topics that cut across maritime industries (regulation and competitiveness). The topics and narrower research questions addressed in the initiative were developed in close...

  5. Environmental control of microtubule-based bidirectional cargo-transport

    CERN Document Server

    Klein, Sarah; Santen, Ludger

    2014-01-01

    Inside cells, various cargos are transported by teams of molecular motors. Intriguingly, the motors involved generally have opposite pulling directions, and the resulting cargo dynamics is a biased stochastic motion. It is an open question how the cell can control this bias. Here we develop a model which takes explicitly into account the elastic coupling of the cargo with each motor. We show that bias can be simply controlled or even reversed in a counterintuitive manner via a change in the external force exerted on the cargo or a variation of the ATP binding rate to motors. Furthermore, the superdiffusive behavior found at short time scales indicates the emergence of motor cooperation induced by cargo-mediated coupling.

  6. Environmental control of microtubule-based bidirectional cargo transport

    Science.gov (United States)

    Klein, Sarah; Appert-Rolland, Cécile; Santen, Ludger

    2014-07-01

    Inside cells, various cargos are transported by teams of molecular motors. Intriguingly, the motors involved generally have opposite pulling directions, and the resulting cargo dynamics is a biased stochastic motion. It is an open question how the cell can control this bias. Here we develop a model which takes explicitly into account the elastic coupling of the cargo with each motor. We show that bias can be simply controlled or even reversed in a counterintuitive manner via a change in the external force exerted on the cargo or a variation of the environmental properties. Furthermore, the superdiffusive behavior found at short time scales indicates the emergence of motor cooperation induced by cargo-mediated coupling.

  7. Boiler for ships; Hakuyo boira

    Energy Technology Data Exchange (ETDEWEB)

    Shimoda, F. [Mitsubishi Heavy Industries, Ltd., Tokyo (Japan)

    1999-07-20

    In this paper, production and technology trend of boiler for ships in 1998 are described. The actual results of main boiler are as follows. As the main boiler for LNG ships, 4 boilers produced by Mitsui Engineering and Shipbuilding for Qatar Project, 8 produced by Kawasaki Heavy Industries for South Korea and 10 produced by Mitsubishi Heavy Industries for domestic use and South Korea. 1998 was an active year for the main boiler for ships. The auxiliary boiler of steam pressure of 16k to 25k equipping for tanker ships was 115 (4,441t/h of steam quantity in total), it greatly increased in comparison with 88 (3,172t/h) produced in the proceeding year. Donkey boilers of steam pressure of 6k to 10k equipping for container ships and bulk cargo was 147 (672t/h), and it substantially decreased in comparison with 274 (693t/h) of the proceeding year, but capacity per boiler increased. The gas exhaust economizer for turbo power generation plants was 6 produced for VLCC. (NEDO)

  8. UNIVERSE IS LIKE SPACE SHIP

    Directory of Open Access Journals (Sweden)

    M.Arulmani, V.R.Hema Latha

    2013-10-01

    Full Text Available A scientific research in this article focus that the whole Cosmo Universe shall be considered as a “SPACE SHIP”. The Space Ship shall be considered as ANCHORED to the base of universe with three-in-one space elements SUN, EARTH, MOON for its stability and symmetry. Further the Anchor of Universe shall be considered fastened to the “J-Hook” through strong THREAD consists of three core or strand for its “Centre of Buoyancy”.The Space Ship shall be considered as a suspending pendulum. The base of the pendulum considered like Anchor which is fastened to J-Hook through a cable of three core and in “Standstill State”.The human populations, life organisms spread all over the EARTH shall be considered as Passengers. Other space objects such as Planets, Comets, Asteroids, Matters, Molecules having definite mass shall be considered as CARGO existing in the Upper Deck of Human Passengers and other life organisms.The “J-Hook” shall be considered as having infinity energy level and any weight added to the base of space ship during the course of expanding universe shall not affect the centre of buoyancy of ship and the ship shall be considered as highly stable for ever (Highly Anchored and become standstill.

  9. Study on Alternative Cargo Launch Options from the Lunar Surface

    Energy Technology Data Exchange (ETDEWEB)

    Cheryl A. Blomberg; Zamir A. Zulkefli; Spencer W. Rich; Steven D. Howe

    2013-07-01

    In the future, there will be a need for constant cargo launches from Earth to Mars in order to build, and then sustain, a Martian base. Currently, chemical rockets are used for space launches. These are expensive and heavy due to the amount of necessary propellant. Nuclear thermal rockets (NTRs) are the next step in rocket design. Another alternative is to create a launcher on the lunar surface that uses magnetic levitation to launch cargo to Mars in order to minimize the amount of necessary propellant per mission. This paper investigates using nuclear power for six different cargo launching alternatives, as well as the orbital mechanics involved in launching cargo to a Martian base from the moon. Each alternative is compared to the other alternative launchers, as well as compared to using an NTR instead. This comparison is done on the basis of mass that must be shipped from Earth, the amount of necessary propellant, and the number of equivalent NTR launches. Of the options, a lunar coil launcher had a ship mass that is 12.7% less than the next best option and 17 NTR equivalent launches, making it the best of the presented six options.

  10. General arrangement and alignment calculation for ship propulsion shaft%船舶推进轴系的一般布置和校中计算

    Institute of Scientific and Technical Information of China (English)

    付品森

    2014-01-01

    Sailing safety of a ship is directly concerned with the quality of the alignment of propulsion shafting, which is inlfuenced by many factors, such as process precision of ship shaft, installation bending of shafting, hull distortion, quality of operation personnel and so on. This paper introduces the principles and methods for the calculation of general arrangement and alignment of propulsion shafting, and especially presents principle, calculation procedure and algorithm of rational load method. Taking an ocean engineering vessel as an example, it describes method, program, procedure and analysis of jack-up test in detail.%船舶推进轴系校中质量的好坏直接关系到船舶的航行安全,而影响轴系校中质量的因素很多,如船轴的加工精度、轴系的安装弯曲、船体变形、操作人员素质等。文中介绍了船舶推进轴系一般布置和校中计算的一些原理和方法,重点介绍合理负荷法的原理、计算步骤和计算方法等,并以某海洋工程船为例,详述了顶举试验的方法、程序和步骤与分析。

  11. Scientific opinion on the evaluation of substances as acceptable previous cargoes for edible fats and oils

    OpenAIRE

    Petersen, Annette

    2017-01-01

    Shipping of edible fats and oils into Europe is permitted in bulk tanks, provided that the previous cargo is included in a positive list. The European Commission requested EFSA to evaluate the acceptability as previous cargoes for fats and oils the substances calcium lignosulphonate, methyl acetate, ethyl tert-butyl ether (ETBE) and ammonium sulphate. The evaluation was based on the same criteria as those used for the evaluation of the substances currently on the list in the Annex to Commissi...

  12. A matheuristic for the liner shipping network design problem

    DEFF Research Database (Denmark)

    Brouer, Berit Dangaard; Desaulniers, Guy; Pisinger, David

    We present a matheuristic, an integer programming based heuristic, for the liner shipping network design problem. This problem consists of finding a set of container shipping routes defining a capacitated network for cargo transport. The objective is to maximize the revenue of cargo transport...... the available fleet of container vessels. The cargo transports make extensive use of transshipments between routes and the number of transshipments of the cargo flow is decisive for network profitability. Computational results are reported for the benchmark suite LINER-LIB 2012 following the industry standard...... of weekly departures on every schedule. The heuristic shows overall good performance and is able to find high quality solutions within competitive execution times. The matheuristic can also be applied as a decision support tool to improve an existing network by optimizing on a designated subset...

  13. Acoustic Multipurpose Cargo Transfer Bag

    Science.gov (United States)

    Baccus, Shelley

    2015-01-01

    The Logistics Reduction (LR) project within the Advanced Exploration Systems (AES) program is tasked with reducing logistical mass and repurposing logistical items. Multipurpose Cargo Transfer Bags (MCTB) are designed to be the same external volume as a regular cargo transfer bag, the common logistics carrier for the International Space Station. After use as a cargo bag, the MCTB can be unzipped and unfolded to be reused. This Acoustic MCTBs transform into acoustic blankets after the initial logistics carrying objective is complete.

  14. Interaction between motion of free fluid surfaces and ship motions

    Science.gov (United States)

    Lamba, D.; Duse, A.; Varsami, C.; Hanzu-Pazara, R.

    2017-08-01

    This scientific research presents very important aspects of the liquefying process of bulk cargo carried on board merchant ship which may lead to loss of the intact stability of bulk carriers, with serious consequences for the safety of ships and their crew. We are going to present an analytical modelling, modal analysis and finite elements analysis applied in the hydrodynamics of the ship in the water environment, when realising a complex model 3D of the ship’s bulkheads by modelling with finite volumes with the purpose of emphasising these walls’ behaviour when on board the bulk carrier there is a sloshing effect due to free liquid surfaces in the ship’s cargo holds and we also performed a complex study regarding the structural answer of transverse bulkheads of the cargo holds due to the impact of free liquid surfaces.

  15. China's bulk shipping industry overview

    Energy Technology Data Exchange (ETDEWEB)

    Li, Z. [China National Chartering Corp., Sinochart (China)

    2002-07-01

    A set of 20 slides/overheads (file LiZhen.ppt) in Chinese and English outlines the talk under the headings: recent development in marine shipping governance; trends and characteristics of international trade of China's main bulk cargo; China's bulk cargo fleet; and the development of China National Chartering Corp, SINOCHART. Four pages of text in English reports the talk.

  16. Spectroscopic neutron radiography for a cargo scanning system

    Energy Technology Data Exchange (ETDEWEB)

    Rahon, Jill [Department of Nuclear Science and Engineering, Massachusetts Institute of Technology, 77 Massachusetts Ave, Cambridge, MA 02139 (United States); Danagoulian, Areg, E-mail: aregjan@mit.edu [Department of Nuclear Science and Engineering, Massachusetts Institute of Technology, 77 Massachusetts Ave, Cambridge, MA 02139 (United States); MacDonald, Thomas D. [Department of Nuclear Science and Engineering, Massachusetts Institute of Technology, 77 Massachusetts Ave, Cambridge, MA 02139 (United States); Hartwig, Zachary S. [Plasma Science and Fusion Center, Massachusetts Institute of Technology, 77 Massachusetts Ave, Cambridge, MA 02139 (United States); Lanza, Richard C. [Department of Nuclear Science and Engineering, Massachusetts Institute of Technology, 77 Massachusetts Ave, Cambridge, MA 02139 (United States)

    2016-06-01

    Detection of cross-border smuggling of illicit materials and contraband is a challenge that requires rapid, low-dose, and efficient radiographic technology. The work we describe here is derived from a technique which uses monoenergetic gamma rays from low energy nuclear reactions, such as {sup 11}B(d,nγ){sup 12}C, to perform radiographic analysis of shipping containers. Transmission ratios of multiple monoenergetic gamma lines resulting from several gamma producing nuclear reactions can be employed to detect materials of high atomic number (Z), the details of which will be described in a separate paper. Inherent in this particular nuclear reaction is the production of fast neutrons which could enable neutron radiography and further characterization of the effective-Z of the cargo, especially within the range of lower Z. Previous research efforts focused on the use of total neutron counts in combination with X-ray radiography to characterize the hydrogenous content of the cargo. We present a technique of performing transmitted neutron spectral analysis to reconstruct the effective Z and potentially the density of the cargo. This is made possible by the large differences in the energy dependence of neutron scattering cross-sections between hydrogenous materials and those of higher Z. These dependencies result in harder transmission spectra for hydrogenous cargoes than those of non-hydrogenous cargoes. Such observed differences can then be used to classify the cargo based on its hydrogenous content. The studies presented in this paper demonstrate that such techniques are feasible and can provide a contribution to cargo security, especially when used in concert with gamma radiography.

  17. Spectroscopic neutron radiography for a cargo scanning system

    Science.gov (United States)

    Rahon, Jill; Danagoulian, Areg; MacDonald, Thomas D.; Hartwig, Zachary S.; Lanza, Richard C.

    2016-06-01

    Detection of cross-border smuggling of illicit materials and contraband is a challenge that requires rapid, low-dose, and efficient radiographic technology. The work we describe here is derived from a technique which uses monoenergetic gamma rays from low energy nuclear reactions, such as 11B(d,nγ)12C, to perform radiographic analysis of shipping containers. Transmission ratios of multiple monoenergetic gamma lines resulting from several gamma producing nuclear reactions can be employed to detect materials of high atomic number (Z), the details of which will be described in a separate paper. Inherent in this particular nuclear reaction is the production of fast neutrons which could enable neutron radiography and further characterization of the effective-Z of the cargo, especially within the range of lower Z. Previous research efforts focused on the use of total neutron counts in combination with X-ray radiography to characterize the hydrogenous content of the cargo. We present a technique of performing transmitted neutron spectral analysis to reconstruct the effective Z and potentially the density of the cargo. This is made possible by the large differences in the energy dependence of neutron scattering cross-sections between hydrogenous materials and those of higher Z. These dependencies result in harder transmission spectra for hydrogenous cargoes than those of non-hydrogenous cargoes. Such observed differences can then be used to classify the cargo based on its hydrogenous content. The studies presented in this paper demonstrate that such techniques are feasible and can provide a contribution to cargo security, especially when used in concert with gamma radiography.

  18. Speed Optimization in Liner Shipping Network Design

    DEFF Research Database (Denmark)

    Brouer, Berit Dangaard; Karsten, Christian Vad; Pisinger, David

    In the Liner Shipping Network Design Problem (LSNDP) services sail at a given speed throughout a round trip. In reality most services operate with a speed differentiated head- and back-haul, or even individual speeds on every sailing between two ports. The speed of a service is decisive...... for the bunker consumption in the network as well as the transit time of cargo. Speed optimization has been considered for tramp shipping showing significant reductions in fuel consumption. However, variable speeds has not been considered for post optimization of the LSNDP, where speed optimization could result...... in changes to the cargo flow due to transit time restrictions as well as significant savings in fuel consumption and required vessel deployment due to a weekly frequency requirement. We present a heuristic method to calculate variable speed on a service and present computational results for improving...

  19. Time constrained liner shipping network design

    DEFF Research Database (Denmark)

    Karsten, Christian Vad; Brouer, Berit Dangaard; Desaulniers, Guy

    2016-01-01

    We present a mathematical model and a solution method for the liner shipping network design problem. The model takes into account coordination between vessels and transit time restrictions on the cargo flow. The solution method is an improvement heuristic, where an integer program is solved...... iteratively to perform moves in a large neighborhood search. Our improvement heuristic is applicable as a real-time decision support tool for a liner shipping company. It can be used to find improvements to the network when evaluating changes in operating conditions or testing different scenarios....... Computational results on the benchmark suite LINER-LIB are reported....

  20. 46 CFR 153.7 - Ships built before December 27, 1977 and non-self-propelled ships built before July 1, 1983...

    Science.gov (United States)

    2010-10-01

    ... to carry class B or C poisons under 46 CFR part 39; (ii) The cargo in question is a class B or C poison; (iii) The tankship meets the construction standards in 46 CFR part 39; and (iv) The tankship...-propelled ships built before July 1, 1983: Application. 153.7 Section 153.7 Shipping COAST GUARD,...

  1. Vibration and acoustic environments for payload/cargo integration

    Science.gov (United States)

    Hill, R. E.; Coody, M. C.

    1983-01-01

    Shuttle orbiter launch vibration and acoustic environments for cargo bay/payload interfaces are predicted. Data acquired during Shuttle flight tests are compared with the preflight estimates. Vibration response data for payload attachment locations are presented, along with acoustic data in the form of noise-level spectra measured at various locations in the cargo bay and space averages of the noise levels. It is shown that the payload-bay vibration and acoustic environments are generally less severe than predicted.

  2. 49 CFR 177.817 - Shipping papers.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Shipping papers. 177.817 Section 177.817... Information and Regulations § 177.817 Shipping papers. (a) General requirements. A person may not accept a... received a shipping paper prepared in accordance with part 172 of this subchapter or the material...

  3. Design of Crashworthy Ship Strucures

    DEFF Research Database (Denmark)

    Toernqvist, Rikard

    2003-01-01

    The main purpose of the project has been to develop a rational procedure for designing new crashworthy side structures for those ship types where it could be expected that a substantial improvement of the crashworthiness and the related safety could be achieved by careful consideration of the str......The main purpose of the project has been to develop a rational procedure for designing new crashworthy side structures for those ship types where it could be expected that a substantial improvement of the crashworthiness and the related safety could be achieved by careful consideration...... of the structural design. For a tanker vessel or other vessels carrying hazardous cargo, damage is not acceptable if it results in cargo outflow with disastrous consequences to the environment. Likewise, the foundering of a passenger vessel can be disastrous with loss of many human lives. A major challenge...... a structure is subjected to biaxial loading. The main aspect of this thesis has therefore been to study the fracture criteria available in the literature and to validate them against various experiments with varying stress and strain states....

  4. Cargo-cult training

    Science.gov (United States)

    Magueijo, João

    2009-12-01

    Richard Feynman, in one of his famous rants, evoked as a metaphor what he called "cargo-cult science". During the Second World War, the indigenous people of the South Pacific became accustomed to US Air Force planes landing on their islands, invariably bringing a profusion of desirable goods and tasty foods. When the war ended, they were distressed by the discontinuation of this popular service. So, they decided to take action. They cleared elongated patches of land to make them look like runways. They lit wood fires where they had seen electric floodlights guiding in the planes. They built a wooden shack and made a man sit inside with two halves of a coconut on each ear and bamboo bars sticking out like antennas: he was the "air controller". And they waited for the planes to return.

  5. Littoral Combat Ship Crew Scheduling

    Science.gov (United States)

    2015-03-01

    package DON Department of the Navy F&R Fix and Relax GAMS General Algebraic Modeling System LCS Littoral Combat Ship LCSRON Littoral Combat Ship...but that can be acceptable depending on the scheduler needs. F&R produces superior long-term schedules when compared to a similar-length RH schedule...LEFT BLANK 29 IV. MODEL IMPLEMENTATION LCSS is implemented with the General Algebraic Modeling System (GAMS) using the GAMS/CPLEX (GAMS, 2014

  6. 32 CFR 705.5 - Taking of photos on board naval ships, aircraft and installations by members of the general public.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 5 2010-07-01 2010-07-01 false Taking of photos on board naval ships, aircraft... Defense (Continued) DEPARTMENT OF THE NAVY UNITED STATES NAVY REGULATIONS AND OFFICIAL RECORDS PUBLIC AFFAIRS REGULATIONS § 705.5 Taking of photos on board naval ships, aircraft and installations by...

  7. Ship Design

    Science.gov (United States)

    1982-01-01

    Guided missile cruiser equipped with advanced Aegis fleet defense system which automatically tracks hundreds of attacking aircraft or missiles, then fires and guides the ship's own weapons in response. Designed by Ingalls Shipbuilding for the US Navy, the U.S.S. Ticonderoga is the first of four CG-47 cruisers to be constructed. NASTRAN program was used previously in another Navy/Ingalls project involving design and construction of four DDG-993 Kidd Class guided missile destroyers.

  8. Port Security: Container Cargo Control

    Directory of Open Access Journals (Sweden)

    Vladivoj Vlaković

    2006-05-01

    Full Text Available illicittrafficking of threat materials, especially explosives, chemicalsubstances and radioactive or nuclear material. The transportof the threat materials by using sea routes is an advantageto te"orists especially because of the possible use of ship containers.The container is the basis of world trade. It is assumed thatthe world total movement in containers is about 200 millionTEUs ("20-foot equivalent units" per year. The list of materialstransported by containers which should be subject to inspectionwith the aim of reducing the acts of te"orism includes explosives,narcotics, chemical weapons, hazardous chemicalsand radioactive materials.Of special interest is nuclear te"orism. The risk of nuclearte"orism carried out by sub-national groups should be considerednot only in the construction and/or use of nuclear device,but also in possible radioactive contamination of large urbanareas.The system of ship containers control is an essential componentof «smart border» concept. Modem personnel, parcel,vehicle and cargo inspection systems are non-invasive imagingtechniques based on the use of nuclear analytical techniques.The inspection systems use penetrating radiations: hard x-rays(300 keV or more or gamma-rays from radioactive sources(137Cs and 60Co with energies from 600 to 1300 keV that producea high resolution radiograph of the load. Unfortunately,this information is "non-specific" in that it gives no informationon the nature of objects that do not match_ the travel documentsand are not recognized by a visual analysis of the radiographicpicture. Moreover, there are regions of the containerwherex and gamma-ray systems are "blind" due to the high averageatomic number of the objects i"adiated that appear asblack spots in the radiographic image.The systems being developed are based on the use of fast, 14Me V, neutrons with detection of associated a-particle from nuclearreactionbywhichneutrons are produced (d+t>a+n.Jnsuch a way the possibility to

  9. 46 CFR 308.549 - Application for appointment of Cargo Underwriting Agent, Form MA-319.

    Science.gov (United States)

    2010-10-01

    ..., Form MA-319. 308.549 Section 308.549 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... appointment of Cargo Underwriting Agent, Form MA-319. Any domestic insurance company authorized to do a marine... by submitting to the Maritime Administrator a letter and Form MA-399, which may be obtained from...

  10. 15 CFR 30.26 - Reporting of vessels, aircraft, cargo vans, and other carriers and containers.

    Science.gov (United States)

    2010-01-01

    ... vehicles, trailers, pallets, cargo vans, lift vans, or similar shipping containers are not considered... transfer of ownership or title, in their capacity as carriers of goods or as instruments of such carriers... to sale or other transfer from ownership in the United States to ownership abroad. If a vessel,...

  11. 46 CFR Table I to Part 150 - Alphabetical List of Cargoes

    Science.gov (United States)

    2010-10-01

    ... Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES... naphthalene sulfonic acid, sodium salt solution 34 2 DNS Dimethyloctanoic acid 4 DMO Dimethyl phthalate 34 DTL... sulfonic acid, sodium salt solution DNS Sodium hydrogen sulfide, Sodium carbonate solution 0 1, 2...

  12. Methods of Calculating Ship Resistance on Limited Waterways

    Directory of Open Access Journals (Sweden)

    Skupień Emilia

    2015-01-01

    Full Text Available Nowadays predicting transportation costs is more and more important. Most significant part of inland navigation's costs are the costs of fuel. Fuel consumption is related to operating conditions of ship's propulsion system and its resistance. On inland waterways the ship resistance is strictly related to the depth of the waterway. There is a tendency to build a formula that allows its user to calculate the resistance of any inland waterway vessel, but researches claim that most of them are accurate only for particular types of ships and/or operating conditions. The paper presents selected methods of calculating ship resistance on inland waterways. These methods are examined for different types of ships and different conditions using results of model tests. The performed comparison enabled selecting the best option for pushboats and pushed barge trains, but also showed that any of the tested methods is good enough to be used for calculating the resistance of motor cargo vessels. For this reason, based on known equations and using the regression method, the authors have formulated a new method to calculate the resistance of motor cargo vessels on limited waterway. The method makes use of ship's geometry and depth of waterway in relation to ship's speed. Correlating the ship's speed with its resistance and going further with fuel consumption, enables to calculate the costs of voyage depending on the delivery time. The comparison of the methods shows that the new equation provides good accuracy in all examined speed ranges and all examined waterway depths.

  13. Proteomics Characterization of Exosome Cargo

    OpenAIRE

    Schey, Kevin L.; Luther, J. Matthew; Rose, Kristie L

    2015-01-01

    Characterization of exosomal cargo is of significant interest because this cargo can provide clues to exosome biogenesis, targeting, and cellular effects and may be a source of biomarkers for disease diagnosis, prognosis and response to treatment. With recent improvements in proteomics technologies, both qualitative and quantitative characterization of exosomal proteins is possible. Here we provide a brief review of exosome proteomics studies and provide detailed protocols for global qualitat...

  14. Relationship between container ship underwater noise levels and ship design, operational and oceanographic conditions

    Science.gov (United States)

    McKenna, Megan F.; Wiggins, Sean M.; Hildebrand, John A.

    2013-05-01

    Low-frequency ocean ambient noise is dominated by noise from commercial ships, yet understanding how individual ships contribute deserves further investigation. This study develops and evaluates statistical models of container ship noise in relation to design characteristics, operational conditions, and oceanographic settings. Five-hundred ship passages and nineteen covariates were used to build generalized additive models. Opportunistic acoustic measurements of ships transiting offshore California were collected using seafloor acoustic recorders. A 5-10 dB range in broadband source level was found for ships depending on the transit conditions. For a ship recorded multiple times traveling at different speeds, cumulative noise was lowest at 8 knots, 65% reduction in operational speed. Models with highest predictive power, in order of selection, included ship speed, size, and time of year. Uncertainty in source depth and propagation affected model fit. These results provide insight on the conditions that produce higher levels of underwater noise from container ships.

  15. Parametrical Method for Determining Optimal Ship Carrying Capacity and Performance of Handling Equipment

    Directory of Open Access Journals (Sweden)

    Michalski Jan P.

    2016-04-01

    Full Text Available The paper presents a method of evaluating the optimal value of the cargo ships deadweight and the coupled optimal value of cargo handling capacity. The method may be useful at the stage of establishing the main owners requirements concerning the ship design parameters as well as for choosing a proper second hand ship for a given transportation task. The deadweight and the capacity are determined on the basis of a selected economic measure of the transport effectiveness of ship – the Required Freight Rate. The mathematical model of the problem is of a deterministic character and the simplifying assumptions are justified for ships operating in the liner trade. The assumptions are so selected that solution of the problem is obtained in analytical closed form. The presented method can be useful for application in the preliminary ship design or in the simulation of pre-investment transportation task studies.

  16. Encoding the Shipping Crisis

    Institute of Scientific and Technical Information of China (English)

    Xue Lina; Lin Lin; Wang Siyuan

    2009-01-01

    @@ According to the statistics from Frech shipping advisory bod-ies,till December 21,2008,165 container ships were idle,leav-ing the fees,such as anchorage fees,ship maintaining fee,crev resettlement fee and repaying loans for ship-buying,an-noying the ship-owners.

  17. Shipping Industry Structure

    NARCIS (Netherlands)

    Wijnolst, N.; Waals, F.

    1999-01-01

    Understanding Shipping Management requires a thorough understanding of the Shipping Industry Structure. This book provides this knowledge base and should be seen in conjunction with two other books: Shipping and Design Innovation in Shipping. Shipping Industry Structure was intended as the first par

  18. Shipping Industry Structure

    NARCIS (Netherlands)

    Wijnolst, N.; Waals, F.

    1999-01-01

    Understanding Shipping Management requires a thorough understanding of the Shipping Industry Structure. This book provides this knowledge base and should be seen in conjunction with two other books: Shipping and Design Innovation in Shipping. Shipping Industry Structure was intended as the first par

  19. Shipping Industry Structure

    NARCIS (Netherlands)

    Wijnolst, N.; Waals, F.

    1999-01-01

    Understanding Shipping Management requires a thorough understanding of the Shipping Industry Structure. This book provides this knowledge base and should be seen in conjunction with two other books: Shipping and Design Innovation in Shipping. Shipping Industry Structure was intended as the first

  20. Outline of The probabilistic Concept of Ship Subdivision

    DEFF Research Database (Denmark)

    Pawlowski, Maciej

    1996-01-01

    An outline of the whole probabilistic concept of ship subdivision is given, comprising the latest advances in determination of pi and s1 factors - the two probabilistic factors that form the basis of the new regulations.The method for calculating the pi factor for dry cargo ships is thoroughly...... presented and compared with the original method, developed by IMO inthe late 60's for passenger ships. After that, a review is presented of the past efforts to develop an estimate for the factor si - the most difficultand controversial part of the new subdivision regulations based on the probabilistic...... conditions, assuring a high accuracy of prediction for the si factor....

  1. Measuring SO2 ship emissions with an ultra-violet imaging camera

    Science.gov (United States)

    Prata, A. J.

    2013-11-01

    Over the last few years fast-sampling ultra-violet (UV) imaging cameras have been developed for use in measuring SO2 emissions from industrial sources (e.g. power plants; typical fluxes ~1-10 kg s-1) and natural sources (e.g. volcanoes; typical fluxes ~10-100 kg s-1). Generally, measurements have been made from sources rich in SO2 with high concentrations and fluxes. In this work, for the first time, a UV camera has been used to measure the much lower concentrations and fluxes of SO2 (typical fluxes ~0.01-0.1 kg s-1) in the plumes from moving and stationary ships. Some innovations and trade-offs have been made so that estimates of the fluxes and path concentrations can be retrieved in real-time. Field experiments were conducted at Kongsfjord in Ny Ålesund, Svalbard, where emissions from cruise ships were made, and at the port of Rotterdam, Netherlands, measuring emissions from more than 10 different container and cargo ships. In all cases SO2 path concentrations could be estimated and fluxes determined by measuring ship plume speeds simultaneously using the camera, or by using surface wind speed data from an independent source. Accuracies were compromised in some cases because of the presence of particulates in some ship emissions and the restriction of single-filter UV imagery, a requirement for fast-sampling (>10 Hz) from a single camera. Typical accuracies ranged from 10-30% in path concentration and 10-40% in flux estimation. Despite the ease of use and ability to determine SO2 fluxes from the UV camera system, the limitation in accuracy and precision suggest that the system may only be used under rather ideal circumstances and that currently the technology needs further development to serve as a method to monitor ship emissions for regulatory purposes.

  2. Ship?Shore and Ship?Ship Data Transfer

    Science.gov (United States)

    Heikkilä, Martti

    During recent years there has been significant development in several technologies which can contribute to the efficiency and safety of maritime traffic. The most important of these are accurate positioning systems (DGPS), digital data transmission/transponder technology, electronic chart systems (ECDIS), control of ships using electronic passage plans, and ship path prediction. With a widespread implementation of these new techniques, combined with advanced ship-shore and ship-ship data transfer, significant improvements can be achieved in traffic situation awareness both in a VTS and onboard. This paper describes the research carried out at VTT on VTS development, and especially gives an outline of new VTS functions using shipship data transfer.

  3. Presión e intereses en torno al cargo de protector general de indios del Nuevo Reino de León: el caso de Nicolás de Villalobos, 1714-1734

    Directory of Open Access Journals (Sweden)

    Baeza Martín, Ascensión

    2010-06-01

    Full Text Available The pernicious transformation undergone by the system of use of the indigenous workpeople in the Nuevo Reino de Leon, characterized by the ravages and slavery to the Indians in the encomiendas or congregas, provoked their rebelliousness. The frequent assaults to the Spanish colonists and their properties, as well as the expeditions and punishments of these against the natives reflected the hard conditions of life in that province of the northeast of the Viceroyalty of Nueva España and the constant been military of the same one. With the substantial changes implanted from the viceregal government by means of the shipment in 1714 of the commissioner Francisco de Barbadillo Victoria and the creation by this one of the employment of General Indians Protector in that earth, one was to restrain this uncontrollable situation. The difficulty of which the figure of the protector, so necessary in the first times of the reforms, held fast, would let see the partisanship, passions and interests of the authorities and the diverse social sectors of that border region.

    La perniciosa transformación sufrida por el sistema de utilización de la mano de obra indígena en el Nuevo Reino de León, caracterizado por los estragos y esclavitud a los indios en las encomiendas o congregas, provocaban su rebeldía. Los frecuentes asaltos a los colonos españoles y sus propiedades, así como las expediciones y castigos de estos contra los aborígenes reflejaban las duras condiciones de vida en esa provincia del nordeste del Virreinato de Nueva España y el constante estado de guerra de la misma. Con los substanciales cambios implantados desde el gobierno virreinal mediante el envío en 1714 del comisionado Francisco de Barbadillo Victoria y la creación por éste del cargo de protector general de indios en esa tierra, se trató de frenar esta incontrolable situación. La dificultad de que se afianzara la figura del protector, tan necesaria en los primeros tiempos

  4. A matheuristic for the liner shipping network design problem

    DEFF Research Database (Denmark)

    Brouer, Berit Dangaard; Desaulniers, Guy; Pisinger, David

    2014-01-01

    We present an integer programming based heuristic, a matheuristic, for the liner shipping network design problem. This problem consists of finding a set of container shipping routes defining a capacitated network for cargo transport. The objective is to maximize the revenue of cargo transport....... The matheuristic can also be applied as a decision support tool to improve an existing network by optimizing on a designated subset of the routes. A case study is presented for this approach with very promising results. © 2014 Elsevier Ltd. All rights reserved......., while minimizing the cost of operating the network. Liner shipping companies publish a set of routes with a time schedule, and it is an industry standard to have a weekly departure at each port call on a route. A weekly frequency is achieved by deploying several vessels to a single route, respecting...

  5. A systematic approach to pair secretory cargo receptors with their cargo suggests a mechanism for cargo selection by Erv14.

    Science.gov (United States)

    Herzig, Yonatan; Sharpe, Hayley J; Elbaz, Yael; Munro, Sean; Schuldiner, Maya

    2012-01-01

    The endoplasmic reticulum (ER) is the site of synthesis of secreted and membrane proteins. To exit the ER, proteins are packaged into COPII vesicles through direct interaction with the COPII coat or aided by specific cargo receptors. Despite the fundamental role of such cargo receptors in protein traffic, only a few have been identified; their cargo spectrum is unknown and the signals they recognize remain poorly understood. We present here an approach we term "PAIRS" (pairing analysis of cargo receptors), which combines systematic genetic manipulations of yeast with automated microscopy screening, to map the spectrum of cargo for a known receptor or to uncover a novel receptor for a particular cargo. Using PAIRS we followed the fate of ∼150 cargos on the background of mutations in nine putative cargo receptors and identified novel cargo for most of these receptors. Deletion of the Erv14 cargo receptor affected the widest range of cargo. Erv14 substrates have a wide array of functions and structures; however, they are all membrane-spanning proteins of the late secretory pathway or plasma membrane. Proteins residing in these organelles have longer transmembrane domains (TMDs). Detailed examination of one cargo supported the hypothesis that Erv14 dependency reflects the length rather than the sequence of the TMD. The PAIRS approach allowed us to uncover new cargo for known cargo receptors and to obtain an unbiased look at specificity in cargo selection. Obtaining the spectrum of cargo for a cargo receptor allows a novel perspective on its mode of action. The rules that appear to guide Erv14 substrate recognition suggest that sorting of membrane proteins at multiple points in the secretory pathway could depend on the physical properties of TMDs. Such a mechanism would allow diverse proteins to utilize a few receptors without the constraints of evolving location-specific sorting motifs.

  6. Tracking 800-year-old Shipments: An Archaeological Investigation of the Mado Shipwreck Cargo, Taean, Korea

    Science.gov (United States)

    Kim, Minkoo; Moon, Whan Suk

    2011-12-01

    This paper examines cargo from an 800-year-old shipwreck and discusses its implications in relation to the exchange networks and maritime transportation of the Goryeo period (A.D. 918-1392) in Korea. In 2007, two local fishermen fortuitously discovered porcelain vessels from a Goryeo-period shipwreck off the mid-western coast of the Korean peninsula. Underwater excavation conducted by the National Research Institute of Maritime Cultural Heritage (NRIMCH) revealed that the ship was carrying a myriad of cargoes destined for Gaegyeong, the capital of the Goryeo dynasty. Excavation indicates that the main body of the cargo was porcelain vessels produced in the southern part of the peninsula. Archaeobotanical investigation of the wreck deposits revealed that the ship was carrying crops such as rice ( Oryza sativa L.), broomcorn millet ( Panicum miliaceum L.), foxtail millet ( Setaria italica (L.) P. Beauv.), and buckwheat ( Fagopyrum esculentum Moench) bound for the capital. Among the recovered objects were 73 wooden cargo tags with Chinese letters. These tags, equivalent to the modern day air bill, contained detailed information about the senders, recipients, and shipped goods. These findings indicate that during the Goryeo period maritime transportation played an important role in the interpersonal exchange of products over long distances.

  7. Effect of Wind to the Maneuvering Ship Control in the Avoidence Collision

    Directory of Open Access Journals (Sweden)

    Aulia S. Aisjah

    2012-11-01

    Full Text Available Marine transportation as an important roles in Indonesia, it is two third of Indonesian territorial is waters. Tanjung Perak port is one busiest transportation in Indonesia. To enter the terminal ship is shipping throuh Madura strait. To enhance ship safety management, navigational device known as AIS used for navigational purpose. AIS data contain multiple ship specification, statically and dynamically. Those data can be used as inputs in maneuvering control. This research focus on creating ship maneuvering control system by utilizing AIS data. The strategic control is Fuzzy Logic (FL. The aim of research is carrying ship to the trajectory to collision avoidence to other ship. The Fuzzy Logic Control consits two units: Heading control and speed control. The case study is applying controler to the cargo ship, and disturbance is wind in various coming angle.

  8. Light absorbing carbon emissions from commercial shipping

    Science.gov (United States)

    Lack, Daniel; Lerner, Brian; Granier, Claire; Baynard, Tahllee; Lovejoy, Edward; Massoli, Paola; Ravishankara, A. R.; Williams, Eric

    2008-07-01

    Extensive measurements of the emission of light absorbing carbon aerosol (LAC) from commercial shipping are presented. Vessel emissions were sampled using a photoacoustic spectrometer in the Gulf of Mexico region. The highest emitters (per unit fuel burnt) are tug boats, thus making significant contributions to local air quality in ports. Emission of LAC from cargo and non cargo vessels in this study appears to be independent of engine load. Shipping fuel consumption data (2001) was used to calculate a global LAC contribution of 133(+/-27) Ggyr-1, or ~1.7% of global LAC. This small fraction could have disproportionate effects on both air quality near port areas and climate in the Arctic if direct emissions of LAC occur in that region due to opening Arctic sea routes. The global contribution of this LAC burden was investigated using the MOZART model. Increases of 20-50 ng m-3 LAC (relative increases up to 40%) due to shipping occur in the tropical Atlantic, Indonesia, central America and the southern regions of South America and Africa.

  9. Cargo transport by several motors

    CERN Document Server

    Zhang, Yunxin

    2010-01-01

    In cells, organelles and vesicles are usually transported by cooperation of several motor proteins, including plus-end directed motor kinesin and minus-end directed motor dynein. Many biophysical models have been constructed to understand the mechanism of this motion. However, so far, the basic principle about it remains unclosed. In this paper, based on the recent experimental results and existing theoretical models, a spider-like model is provided. In this model, each motor is regarded as a bead-spring system. The bead can bind to or unbind from the track stochastically, and step forward or backward with fixed step size L and force dependent transition rates. The spring connects the bead to cargo tightly. At any time, the position of cargo is determined by force balance condition. The obvious characteristics of our model are that, the motors interact with each other and they do not share the external load equally. Our results indicate, the stall force of cargo, under which the mean velocity of cargo vanishe...

  10. 49 CFR 172.328 - Cargo tanks.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Cargo tanks. 172.328 Section 172.328... SECURITY PLANS Marking § 172.328 Cargo tanks. (a) Providing and affixing identification numbers. Unless a cargo tank is already marked with the identification numbers required by this subpart,...

  11. 29 CFR 1917.114 - Cargo doors.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 7 2010-07-01 2010-07-01 false Cargo doors. 1917.114 Section 1917.114 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) MARINE TERMINALS Terminal Facilities § 1917.114 Cargo doors. (a) Mechanically operated. (1) Cargo...

  12. Green shipping management

    CERN Document Server

    Lun, Y H Venus; Wong, Christina W Y; Cheng, T C E

    2016-01-01

    This book presents theory-driven discussion on the link between implementing green shipping practices (GSP) and shipping firm performance. It examines the shipping industry’s challenge of supporting economic growth while enhancing environmental performance. Consisting of nine chapters, the book covers topics such as the conceptualization of green shipping practices (GSPs), measurement scales for evaluating GSP implementation, greening capability, greening and performance relativity (GPR), green management practice, green shipping network, greening capacity, and greening propensity. In view of the increasing quest for environment protection in the shipping sector, this book provides a good reference for firms to understand and evaluate their capability in carrying out green operations on their shipping activities.

  13. Cargo-shell and cargo-cargo couplings govern the mechanics of artificially loaded virus-derived cages

    Science.gov (United States)

    Llauró, Aida; Luque, Daniel; Edwards, Ethan; Trus, Benes L.; Avera, John; Reguera, David; Douglas, Trevor; Pablo, Pedro J. De; Castón, José R.

    2016-04-01

    Nucleic acids are the natural cargo of viruses and key determinants that affect viral shell stability. In some cases the genome structurally reinforces the shell, whereas in others genome packaging causes internal pressure that can induce destabilization. Although it is possible to pack heterologous cargoes inside virus-derived shells, little is known about the physical determinants of these artificial nanocontainers' stability. Atomic force and three-dimensional cryo-electron microscopy provided mechanical and structural information about the physical mechanisms of viral cage stabilization beyond the mere presence/absence of cargos. We analyzed the effects of cargo-shell and cargo-cargo interactions on shell stability after encapsulating two types of proteinaceous payloads. While bound cargo to the inner capsid surface mechanically reinforced the capsid in a structural manner, unbound cargo diffusing freely within the shell cavity pressurized the cages up to ~30 atm due to steric effects. Strong cargo-cargo coupling reduces the resilience of these nanocompartments in ~20% when bound to the shell. Understanding the stability of artificially loaded nanocages will help to design more robust and durable molecular nanocontainers.Nucleic acids are the natural cargo of viruses and key determinants that affect viral shell stability. In some cases the genome structurally reinforces the shell, whereas in others genome packaging causes internal pressure that can induce destabilization. Although it is possible to pack heterologous cargoes inside virus-derived shells, little is known about the physical determinants of these artificial nanocontainers' stability. Atomic force and three-dimensional cryo-electron microscopy provided mechanical and structural information about the physical mechanisms of viral cage stabilization beyond the mere presence/absence of cargos. We analyzed the effects of cargo-shell and cargo-cargo interactions on shell stability after encapsulating two

  14. Stokes Efficiency of Molecular Motor-Cargo Systems

    Directory of Open Access Journals (Sweden)

    Hongyun Wang

    2008-01-01

    Full Text Available A molecular motor utilizes chemical free energy to generate a unidirectional motion through the viscous fluid. In many experimental settings and biological settings, a molecular motor is elastically linked to a cargo. The stochastic motion of a molecular motor-cargo system is governed by a set of Langevin equations, each corresponding to an individual chemical occupancy state. The change of chemical occupancy state is modeled by a continuous time discrete space Markov process. The probability density of a motor-cargo system is governed by a two-dimensional Fokker-Planck equation. The operation of a molecular motor is dominated by high viscous friction and large thermal fluctuations from surrounding fluid. The instantaneous velocity of a molecular motor is highly stochastic: the past velocity is quickly damped by the viscous friction and the new velocity is quickly excited by bombardments of surrounding fluid molecules. Thus, the theory for macroscopic motors should not be applied directly to molecular motors without close examination. In particular, a molecular motor behaves differently working against a viscous drag than working against a conservative force. The Stokes efficiency was introduced to measure how efficiently a motor uses chemical free energy to drive against viscous drag. For a motor without cargo, it was proved that the Stokes efficiency is bounded by 100% [H. Wang and G. Oster, (2002]. Here, we present a proof for the general motor-cargo system.

  15. Shared Value Potential of Transporting Cargo via Hyperloop

    Directory of Open Access Journals (Sweden)

    Max Werner

    2016-08-01

    Full Text Available This research estimates the shared value created by constructing a hypothetical Hyperloop to transport cargo along 300 km in Northern Germany. Following Porter-Kramer (2011, we identified and evaluated eight factors that create shared value: travel speed, operating costs, safety, noise pollution, air pollution, climate effect/carbon footprint, separation effect/ property efficiency, and maintenance. Using official data compiled by several German institutes and organizations, we conducted comparative analysis to quantify and compare the abovementioned factors for Hyperloop and over-the-road cargo transport in Germany. Then, we monetized the individual and collective benefits of the shared value created by Hyperloop replacing a significant share of cargo transported by truck. Our findings indicate that the hypothetical Hyperloop project in Northern Germany would create €660 to €900 million of shared value annually. Our research method establishes a framework for assessing future transportation projects like Hyperloop, and our findings can be generalized to industrialized nations beyond Germany.

  16. Novel Ship Propulsion System

    Institute of Scientific and Technical Information of China (English)

    JI Yulong; SUN Yuqing; ZHANG Hongpeng; ZHANG Yindong; CHEN Haiquan

    2009-01-01

    As the development tends towards high-speed, large-scale and high-power, power of the ship main engine becomes larger and larger. This make the engine design and cabin arrangement become more and more difficult. Ship maneuverability becomes bad. A new ship propulsion system, integrated hydraulic propulsion (IHP), is put forward to meet the development of modem ship. Principle of IHP system is discussed. Working condition matching characteristic of IHP ship is studied based on its matching characteristic charts. According to their propulsion principle, dynamic mathematic models of IHP ship and direct propulsion (DP) ship are developed. These two models are verified by test sailing and test stand data. Based on the software Matlab/Simulink, comparison research between IHP ship and DP ship is conducted. The results show that cabin arrangement of IHP ship is very flexible, working condition matching characteristic of IHP ship is good, the ratio of power to weight of IHP ship is larger than DP ship, and maneuverability is excellent. IHP system is suitable for engineering ship, superpower ship and warship, etc.

  17. Contrails, contrail cirrus, and ship tracks

    OpenAIRE

    Gierens, Klaus Martin

    2007-01-01

    The following text is an enlarged version of the conference tutorial lecture on contrails, contrail cirrus, and ship tracks. I start with a general introduction into aerosol effects on clouds. Contrail formation and persistence, aviation’s share to cirrus trends and ship tracks are treated then.

  18. Proteomics characterization of exosome cargo.

    Science.gov (United States)

    Schey, Kevin L; Luther, J Matthew; Rose, Kristie L

    2015-10-01

    Characterization of exosomal cargo is of significant interest because this cargo can provide clues to exosome biogenesis, targeting, and cellular effects and may be a source of biomarkers for disease diagnosis, prognosis and response to treatment. With recent improvements in proteomics technologies, both qualitative and quantitative characterization of exosomal proteins is possible. Here we provide a brief review of exosome proteomics studies and provide detailed protocols for global qualitative, global quantitative, and targeted quantitative analysis of exosomal proteins. In addition, we provide an example application of a standard global quantitative analysis followed by validation via a targeted quantitative analysis of urine exosome samples from human patients. Advantages and limitations of each method are discussed as well as future directions for exosome proteomics analysis.

  19. United Airlines Assists Tsunami Relief Effort United donates cargo space for relief supplies going to southern Asia

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    @@ United Airlines today announced several initiatives to assist with the tsunami relief effort in Asia, including the donation of available cargo space to ship relief supplies to southern Thailand,Indonesia, Sri Lanka and other coastal areas on the Indian Ocean.

  20. United Airlines Assists Tsunami Relief Effort United donates cargo space for relief supplies going to southern Asia

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

      United Airlines today announced several initiatives to assist with the tsunami relief effort in Asia, including the donation of available cargo space to ship relief supplies to southern Thailand,Indonesia, Sri Lanka and other coastal areas on the Indian Ocean.……

  1. 46 CFR 154.532 - Valves: Cargo tank MARVS greater than 69 kPa gauge (10 psig).

    Science.gov (United States)

    2010-10-01

    ... practical, a: (1) Stop valve capable of local manual operation; and (2) A remotely controlled quick-closing... section. (c) One valve may be substituted for the manual controlled stop valve and the remotely controlled... 46 Shipping 5 2010-10-01 2010-10-01 false Valves: Cargo tank MARVS greater than 69 kPa gauge (10...

  2. A heuristic and hybrid method for the tank allocation problem in maritime bulk shipping

    DEFF Research Database (Denmark)

    Vilhelmsen, Charlotte; Larsen, Jesper; Lusby, Richard Martin

    2016-01-01

    In bulk shipping, ships often have multiple tanks and carry multiple inhomogeneous products at a time. When operating such ships it is therefore a major challenge to decide how to best allocate cargoes to available tanks while taking into account tank capacity, safety restrictions, ship stability...... and strength as well as other operational constraints. The problem of finding a feasible solution to this tank allocation problem has been shown to be NP-Complete. We approach the problem on a tactical level where requirements for computation time are strict while solution quality is less important than simply...

  3. Cargo-shell and cargo-cargo couplings govern the mechanics of artificially loaded virus-derived cages.

    Science.gov (United States)

    Llauró, Aida; Luque, Daniel; Edwards, Ethan; Trus, Benes L; Avera, John; Reguera, David; Douglas, Trevor; Pablo, Pedro J de; Castón, José R

    2016-04-28

    Nucleic acids are the natural cargo of viruses and key determinants that affect viral shell stability. In some cases the genome structurally reinforces the shell, whereas in others genome packaging causes internal pressure that can induce destabilization. Although it is possible to pack heterologous cargoes inside virus-derived shells, little is known about the physical determinants of these artificial nanocontainers' stability. Atomic force and three-dimensional cryo-electron microscopy provided mechanical and structural information about the physical mechanisms of viral cage stabilization beyond the mere presence/absence of cargos. We analyzed the effects of cargo-shell and cargo-cargo interactions on shell stability after encapsulating two types of proteinaceous payloads. While bound cargo to the inner capsid surface mechanically reinforced the capsid in a structural manner, unbound cargo diffusing freely within the shell cavity pressurized the cages up to ∼30 atm due to steric effects. Strong cargo-cargo coupling reduces the resilience of these nanocompartments in ∼20% when bound to the shell. Understanding the stability of artificially loaded nanocages will help to design more robust and durable molecular nanocontainers.

  4. Spatial partitioning of secretory cargo from Golgi resident proteins in live cells

    Directory of Open Access Journals (Sweden)

    White Jamie

    2001-10-01

    Full Text Available Abstract Background To maintain organelle integrity, resident proteins must segregate from itinerant cargo during secretory transport. However, Golgi resident enzymes must have intimate access to secretory cargo in order to carry out glycosylation reactions. The amount of cargo and associated membrane may be significant compared to the amount of Golgi membrane and resident protein, but upon Golgi exit, cargo and resident are efficiently sorted. How this occurs in live cells is not known. Results We observed partitioning of the fluorescent Golgi resident T2-CFP and fluorescent cargo proteins VSVG3-YFP or VSVG3-SP-YFP upon Golgi exit after a synchronous pulse of cargo was released from the ER. Golgi elements remained stable in overall size, shape and relative position as cargo emptied. Cargo segregated from resident rapidly by blebbing into micron-sized domains that contained little or no detectable resident protein and that appeared to be continuous with the parent Golgi element. Post-Golgi transport carriers (TCs exited repeatedly from these domains. Alternatively, entire cargo domains exited Golgi elements, forming large TCs that fused directly with the plasma membrane. However, domain formation did not appear to be an absolute prerequisite for TC exit, since TCs also exited directly from Golgi elements in the absence of large domains. Quantitative cargo-specific photobleaching experiments revealed transfer of cargo between Golgi regions, but no discrete intra-Golgi TCs were observed. Conclusions Our results establish domain formation via rapid lateral partitioning as a general cellular strategy for segregating different transmembrane proteins along the secretory pathway and provide a framework for consideration of molecular mechanisms of secretory transport.

  5. Solar-electric-propulsion cargo vehicles for split/sprint Mars mission

    Science.gov (United States)

    Callaghan, Christopher E.; Crowe, Michael D.; Swis, Matthew J.; Mickney, Marcus R.; Montgomery, C. Keith; Walters, Robert; Thoden, Scott

    1991-01-01

    In support of the proposed exploration of Mars, an unmanned cargo ferry SEMM1 (Solar Electric Mars Mission) was designed. The vehicle is based on solar electric propulsion, and required to transport a cargo of 61,000 kg. The trajectory is a combination of spirals; first, out from LEO, then around the sun, then spiral down to low Mars orbit. The spacecraft produces 3.03 MWe power using photovoltaic flexible blanket arrays. Ion thrusters using argon as a propellant were selected to drive the ship, providing about 60 Newtons of thrust in low Earth orbit. The configuration is based on two long truss beams to which the 24 individual, self-deployable, solar arrays are attached. The main body module supports the two beams and houses the computers, electrical, and control equipment. The thruster module is attached to the rear of the main body, and the cargo to the front.

  6. 补给船船位多变量系统广义预测控制方法%Research on Multivariable Generalized Predictive Control for the Position of Replenishment Ship

    Institute of Scientific and Technical Information of China (English)

    李源; 夏国清; 周莹

    2012-01-01

    Replenishment at sea is regarded as a very important part of naval logistics, and navy around the world has paid more and more attention to underway replenishment at sea. Based on the separated modeling method, a 3-d mathematical model ship of maneuvering motion which contains disturbing force model of replenishment ship motions has been established, and the mathematical model of supply instruments for highline constant tension system has also been established. Based on the maneuvering motion model of replenishment ship, the low-frequency motion model is given, and then predictive model, which is required in the generalized predictive control, is derived. A MGPC (Multivariable Generalized Predictive Control) algorithm for replenishment ship position control is presented. The results show that the MGPC control system designed in this paper is available to control both the supply and receive ship and to keep the distance between them, and can ensure the replenishment accomplished safely and smoothly.%基于分离型建模的思想,建立了含有风、浪、流以及高架索索道产生的干扰力和力矩的补给船水平面三自由度操纵运动数学模型,并推导得到补给船低频运动状态空间模型.针对补给船在补给作业过程中的特点,采用多变量系统的广义预测控制方法对补给船的船位进行控制,利用其预测模型的提前预测功能,在补给船实际船位与期望船位的偏差产生之前就进行校正,使补给船与接收船保持一定的补给距离,确保补给作业安全顺利地进行.

  7. Tramp Ship Routing and Scheduling - Incorporating Additional Complexities

    DEFF Research Database (Denmark)

    Vilhelmsen, Charlotte

    for tramp ship routing and scheduling problems. This is done in the context of Operations Research, a research field that has achieved great success within optimisation-based planning for vehicle routing problems and in many other areas. The first part of this thesis contains a comprehensive introduction...... of their demand in advance. However, the detailed requirements of these contract cargoes can be subject to ongoing changes, e.g. the destination port can be altered. For tramp operators, a main concern is therefore the efficient and continuous planning of routes and schedules for the individual ships. Due...... to tramp ship routing and scheduling. This includes modelling approaches, solution methods as well as an analysis of the current status and future direction of research within tramp ship routing and scheduling. We argue that rather than developing new solution methods for the basic routing and scheduling...

  8. Wind Forces on Container Ships

    DEFF Research Database (Denmark)

    Andersen, Ingrid Marie Vincent

    2012-01-01

    An investigation of the wind forces acting on a 9,000+ TEU container ship has been carried out through a series of wind tunnel tests. It was investigated how the wind forces depend on the container configuration on the deck using a 1:450 scale model and a series of appropriate container...... are presented as nondimensional coefficients. It is concluded, that the measured forces and moment depend on the container configuration on deck, and the results may provide a general idea of how the magnitude of the wind forces is affected by a given container stacking configuration on a similar container ship....

  9. NWA Cargo Is Granted Additional Cargo Frequencies to China Four all-cargo frequencies per week granted by U.S. Department of Transportation

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    @@ NWA Cargo, the cargo division of Northwest Airlines, will expand its all-cargo freighter service between the United States and China after being awarded four additional frequencies per week by the U.S. Department of Transportation.

  10. Recycling of merchant ships

    Directory of Open Access Journals (Sweden)

    Magdalena Klopott

    2013-12-01

    Full Text Available The article briefly outlines the issues concerning ship recycling. It highlights ships' high value as sources of steel scrap and non-ferrous metals, without omitting the fact that they also contain a range of hazardous substances. Moreover, the article also focuses on basic ship demolition methods and their environmental impact, as well as emphasizes the importance of “design for ship recycling” philosophy.

  11. Communication: Cargo towing by artificial swimmers

    Science.gov (United States)

    Debnath, Debajyoti; Ghosh, Pulak K.; Li, Yunyun; Marchesoni, Fabio; Li, Baowen

    2016-11-01

    An active swimmer can tow a passive cargo by binding it to form a self-propelling dimer. The orientation of the cargo relative to the axis of the active dimer's head is determined by the hydrodynamic interactions associated with the propulsion mechanism of the latter. We show how the tower-cargo angular configuration greatly influences the dimer's diffusivity and, therefore, the efficiency of the active swimmer as a micro-towing motor.

  12. Ship emissions and their externalities for Greece

    Science.gov (United States)

    Tzannatos, Ernestos

    2010-06-01

    The existing and emerging international and European policy framework for the reduction of ship exhaust emissions dictates the need to produce reliable national, regional and global inventories in order to monitor emission trends and consequently provide the necessary support for future policy making. Furthermore, the inventories of ship exhaust emissions constitute the basis upon which their external costs are estimated in an attempt to highlight the economic burden they impose upon the society and facilitate the cost-benefit analysis of the proposed emission abatement technologies, operational measures and market-based instruments prior to their implementation. The case of Greece is of particular interest mainly because the dense ship traffic within the Greek seas directly imposes the impact of its exhaust emission pollutants (NO x, SO 2 and PM) upon the highly populated, physically sensitive and culturally precious Greek coastline, as well as upon the land and seas of Greece in general, whereas the contribution of Greece in the global CO 2 inventory at a time of climatic change awareness cannot be ignored. In this context, this paper presents the contribution of Greece in ship exhaust emissions of CO 2, NO x, SO 2 and PM from domestic and international shipping over the last 25 years (1984-2008), utilizing the fuel-based (fuel sales) emission methodology. Furthermore, the ship exhaust emissions generated within the Greek seas and their externalities are estimated for the year 2008, through utilizing the fuel-based (fuel sales) approach for domestic shipping and the activity-based (ship traffic) approach for international shipping. On this basis, it was found that during the 1984 to 2008 period the fuel-based (fuel sales) ship emission inventory for Greece increased at an average annual rate of 2.85%. In 2008, the CO 2, NO x, SO 2 and PM emissions reached 12.9 million tons (of which 12.4 million tons of CO 2) and their externalities were found to be around 3

  13. A Matheuristic for the Liner Shipping Network Design Problem with Transit Time Restrictions

    DEFF Research Database (Denmark)

    Brouer, Berit Dangaard; Desaulniers, Guy; Karsten, Christian Vad;

    2015-01-01

    We present a mathematical model for the liner shipping network design problem with transit time restrictions on the cargo flow. We extend an existing matheuristic for the liner shipping network design problem to consider transit time restrictions. The matheuristic is an improvement heuristic, where...... on the benchmark suite LINER-LIB are reported, showing profitable networks for most instances. We provide insights on causes for rejecting demand and the average speed per vessel class in the solutions obtained....

  14. A review of modeling issues and analysis methods for the thermal response of cargoes transported in the Safe Secure Trailer subjected to fire environments

    Energy Technology Data Exchange (ETDEWEB)

    Howell, J.R. [Univ. of Texas, Austin, TX (United States). Dept. of Mechanical Engineering; Larsen, M.E. [Sandia National Labs., Albuquerque, NM (United States). High Consequence Assessment and Technology Dept.

    1998-05-01

    This paper discusses thermal analysis in support of probabilistic risk assessment (PRA) to predict the heating of cargoes shipped in vehicles like the Safe Secure Trailer. Fire environments contribute very significantly to the risk associated with ground transport of special nuclear materials. The tradeoff between thermal model complexity and the affordable number of scenarios used to represent the hazard space is discussed as it impacts PRA. The relevant heat transfer mechanisms are discussed along with the applicability of methods from the literature for analysis of these mechanisms. Many of the subject`s real problems remain too complex for affordable and rigorous analysis. Available models are generally restricted to idealizations that are quickly obviated by real effects. Approximate treatment methods, striving to produce conservative, realistic estimates are also discussed.

  15. Defining Service Quality in Tramp Shipping: Conceptual Model and Empirical Evidence

    Directory of Open Access Journals (Sweden)

    Vinh V. Thai

    2014-04-01

    Full Text Available Tramp shipping constitutes a prominent segment of the shipping market. As customers increasingly seek value from service providers for low price but yet high quality services, there is a pressing need to understand critically what construe the service quality for the tramp sector. In this respect, however, no prior research has been conducted for this market segment. This study recognises the gap in the existing maritime literature and aimed to propose and validate a service quality (SQ model to address such a gap. The study employs a triangulation approach, utilising literature review, interviews and surveys to develop, refine and verify the SQ model proposed. Interviews were conducted with various parties in the tramp sector while a survey using a sample size of 343 tramp shippers and 254 tramp service providers was also conducted with tramp shippers and tramp service providers. It was revealed that the SQ model of six dimensions of Corporate Image, Customer Focus, Management, Outcomes, Personnel and Technical, and their 18 associated attributes could be used as a reliable tool to measure service quality in tramp shipping. This research contributes to fill the gap in the existing literature by introducing and validating a new SQ model specifically for tramp shipping. Meanwhile, the model can also be used by practitioners to receive their customers’ evaluation of their service quality as well as a benchmarking tool for continuous improvement. This study is, however, confined to a small-sized data collected in Singapore and to the bulk commodity context. Further studies on the practicality of the SQ model involving larger sample size and in other regions and for the general and specialized cargoes would be required to enhance its reliability.

  16. System Dynamics Modeling for Determining Optimal Ship Sizes and Types in Coastal Liner Services

    Directory of Open Access Journals (Sweden)

    Sung-il Park

    2014-04-01

    Full Text Available The problem of determining the required ship investment for deployment is an ongoing problem faced by governments and ship operators. The nature of ship investment is capital-intensive and the return on investment is often take long time. This paper attempts to establish system dynamics modeling (SDM to simulate and solve this problem in order to help ship operators make effective strategic decisions. A case study of coastal liner services between Incheon and Baengnyeong Island in South Korea was performed. Using scenario analysis, the possible ship sizes (small: 350 tons; large: 2,500 tons and types (new or used were considered by comparing potential revenue with costs. The results indicated that putting a used large-sized ship into operation would accommodate the increasing passenger and cargo volumes, and improve customer services.

  17. Research on the Wave-Induced Ship Motions in Front of Different Types of Wharf

    Science.gov (United States)

    Li, Yan Bao; Jiang, Xue Lian

    One important function of the port is to protect ship or some other facilities from wave attack so as to stably handle cargoes. In current design codes, there are mainly two expressions of the tranquility standard of harbor basin: one is the acceptable wave height in front of wharf; the other is the tolerable amplitude of ship motion. However, ship motions are affected by some more factors simultaneously, such as wave frequency, wave height, incident wave direction, ship properties and wharf type. This paper presents some computed results of the wave-induced ship motions on the basis of a port case in China. First, the Simple Green Function method is employed to solve and compare the 2-dimension hydrodynamic coefficients in front of open or bulkhead wharf. The results show a great difference between them. Then, this paper computes and discusses the ship motions in front of open wharf at different wave frequencies and incident wave directions.

  18. Methods of Raising Funds for Purchasing of New Cruise Ships by International Corporations

    Directory of Open Access Journals (Sweden)

    Kizielewicz Joanna

    2017-06-01

    Full Text Available The world’s cruise corporations regularly purchase large, luxurious cruise ships. In accordance with the Cruise Line International Association, 33 new ocean cruise ships will be available on the market by 2020. These types of capital expenditures are associated with large financial outlays of up to $ 1 billion. The leading cruise corporations are not able to finance purchases of new units with their own resources and therefore look for different solutions. Available publications focus mainly on issues related to purchasing cargo ships, not cruise ships. The objective of the article is to identify sources of funding of new cruise ships. Our analysis identifies the average capital expenditure associated with purchasing new cruise ships and factors that influence it. The most popular methods for raising such capital are also provided. Our research methodology relies on data exploration method, a desk research method and comparative analysis.

  19. 46 CFR 154.1810 - Cargo manual.

    Science.gov (United States)

    2010-10-01

    ... vaporization system. (v) Gas main system. (vi) Cargo tank or compressor relief system and blocked liquid or gas relief system. (vii) Inerting system. (viii) Boil-off gas compressor or reliquefaction system. (ix) Gas... SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Operations § 154.1810 Cargo manual. (a) No person...

  20. Amplicon-Based Pyrosequencing Reveals High Diversity of Protistan Parasites in Ships' Ballast Water: Implications for Biogeography and Infectious Diseases.

    Science.gov (United States)

    Pagenkopp Lohan, K M; Fleischer, R C; Carney, K J; Holzer, K K; Ruiz, G M

    2016-04-01

    Ships' ballast water (BW) commonly moves macroorganisms and microorganisms across the world's oceans and along coasts; however, the majority of these microbial transfers have gone undetected. We applied high-throughput sequencing methods to identify microbial eukaryotes, specifically emphasizing the protistan parasites, in ships' BW collected from vessels calling to the Chesapeake Bay (Virginia and Maryland, USA) from European and Eastern Canadian ports. We utilized tagged-amplicon 454 pyrosequencing with two general primer sets, amplifying either the V4 or V9 domain of the small subunit (SSU) of the ribosomal RNA (rRNA) gene complex, from total DNA extracted from water samples collected from the ballast tanks of bulk cargo vessels. We detected a diverse group of protistan taxa, with some known to contain important parasites in marine systems, including Apicomplexa (unidentified apicomplexans, unidentified gregarines, Cryptosporidium spp.), Dinophyta (Blastodinium spp., Euduboscquella sp., unidentified syndinids, Karlodinium spp., Syndinium spp.), Perkinsea (Parvilucifera sp.), Opisthokonta (Ichthyosporea sp., Pseudoperkinsidae, unidentified ichthyosporeans), and Stramenopiles (Labyrinthulomycetes). Further characterization of groups with parasitic taxa, consisting of phylogenetic analyses for four taxa (Cryptosporidium spp., Parvilucifera spp., Labyrinthulomycetes, and Ichthyosporea), revealed that sequences were obtained from both known and novel lineages. This study demonstrates that high-throughput sequencing is a viable and sensitive method for detecting parasitic protists when present and transported in the ballast water of ships. These data also underscore the potential importance of human-aided dispersal in the biogeography of these microbes and emerging diseases in the world's oceans.

  1. LCA-ship. Design tool for energy efficient ships. A Life Cycle Analysis Program for Ships. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Jiven, Karl; Sjoebris, Anders [MariTerm AB, Goeteborg (Sweden); Nilsson, Maria [Lund Univ. (Sweden). Stiftelsen TEM; Ellis, Joanne; Traegaardh, Peter; Nordstroem, Malin [SSPA Sweden AB, Goeteborg (Sweden)

    2004-05-01

    In order to make it easier to include aspects during ship design that will improve environmental performance, general methods for life cycle calculations and a prototype tool for LCA calculations of ships and marine transportation have been developed. The base of the life cycle analyses is a comprehensive set of life cycle data that was collected for the materials and consumables used in ship construction and vessel operations. The computer tool developed makes it possible to quickly and simply specify (and calculate) the use of consumables over the vessel's life time cycle. Special effort has been made to allow the tool to be used for different types of vessels and sea transport. The main result from the project is the computer tool LCA ship, which incorporates collected and developed life cycle data for some of the most important materials and consumables used in ships and their operation. The computer application also contains a module for propulsion power calculations and a module for defining and optimising the energy system onboard the vessel. The tool itself is described in more detail in the Computer application manual. The input to the application should, as much as possible, be the kind of information that is normally found in a shipping company concerning vessel data and vessel movements. It all starts with defining the ship to be analysed and continues with defining how the ship is used over the lifetime. The tool contains compiled and processed background information about specific materials and processes (LCA data) connected to shipping operations. The LCA data is included in the tool in a processed form. LCA data for steel will for example include the environmental load from the steel production, the process to build the steel structure of the ship, the scrapping and the recycling phase. To be able to calculate the environmental load from the use of steel the total amount of steel used over the life cycle of the ship is also needed. The

  2. LCA-ship. Design tool for energy efficient ships. A Life Cycle Analysis Program for Ships. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Jiven, Karl; Sjoebris, Anders [MariTerm AB, Goeteborg (Sweden); Nilsson, Maria [Lund Univ. (Sweden). Stiftelsen TEM; Ellis, Joanne; Traegaardh, Peter; Nordstroem, Malin [SSPA Sweden AB, Goeteborg (Sweden)

    2004-05-01

    In order to make it easier to include aspects during ship design that will improve environmental performance, general methods for life cycle calculations and a prototype tool for LCA calculations of ships and marine transportation have been developed. The base of the life cycle analyses is a comprehensive set of life cycle data that was collected for the materials and consumables used in ship construction and vessel operations. The computer tool developed makes it possible to quickly and simply specify (and calculate) the use of consumables over the vessel's life time cycle. Special effort has been made to allow the tool to be used for different types of vessels and sea transport. The main result from the project is the computer tool LCA ship, which incorporates collected and developed life cycle data for some of the most important materials and consumables used in ships and their operation. The computer application also contains a module for propulsion power calculations and a module for defining and optimising the energy system onboard the vessel. The tool itself is described in more detail in the Computer application manual. The input to the application should, as much as possible, be the kind of information that is normally found in a shipping company concerning vessel data and vessel movements. It all starts with defining the ship to be analysed and continues with defining how the ship is used over the lifetime. The tool contains compiled and processed background information about specific materials and processes (LCA data) connected to shipping operations. The LCA data is included in the tool in a processed form. LCA data for steel will for example include the environmental load from the steel production, the process to build the steel structure of the ship, the scrapping and the recycling phase. To be able to calculate the environmental load from the use of steel the total amount of steel used over the life cycle of the ship is also needed. The

  3. Simultaneous Optimization of Container Ship Sailing Speed and Container Routing with Transit Time Restrictions

    DEFF Research Database (Denmark)

    Karsten, Christian Vad; Røpke, Stefan; Pisinger, David

    We introduce a decision support tool for liner shipping companies to optimally determine the sailing speed and needed fleet for a global network. As a novelty we incorporate cargo routing decisions with tight transit time restrictions on each container such that we get a realistic picture...

  4. Buckling of Ship Structures

    CERN Document Server

    Shama, Mohamed

    2013-01-01

    Buckling of Ship Structures presents a comprehensive analysis of the buckling problem of ship structural members. A full analysis of the various types of loadings and stresses imposed on ship plating and primary and secondary structural members is given. The main causes and consequences of the buckling mode of failure of ship structure and the methods commonly used to control buckling failure are clarified. This book contains the main equations required to determine the critical buckling stresses for both ship plating and the primary and secondary stiffening structural members. The critical buckling stresses are given for ship plating subjected to the induced various types of loadings and having the most common boundary conditions encountered in ship structures.  The text bridges the gap existing in most books covering the subject of buckling of ship structures in the classical analytical format, by putting the emphasis on the practical methods required to ensure safety against buckling of ship structur...

  5. Power feature required for PEFC powered electric propulsion ship

    Energy Technology Data Exchange (ETDEWEB)

    Yoshida, Isao [NKK Corp., Yokohama (Japan); Oka, Masaru [Mitsubishi Heavy Industries, Ltd., Nagasaki (Japan)

    1996-12-31

    This report covers part of a joint study on a PEFC system for ship propulsion, summarized in a presentation to this Seminar, entitled {open_quote}Study on a Polymer Electrolyte Fuel Cell (PEFC) Propulsion System for Surface Ships{close_quotes}, and which envisages application to a 1,500 DWT cargo vessel. The aspect treated here concerns an analysis of the load-following performance required and estimated of a PEFC system to power the envisaged ship. The analysis proved that difficulty should be expected of the fuel supply circuit in following with adequate rapidity the sharp changes of load on fuel cell under certain conditions. Further integrated experiments and simulation exercises are currently in progress to further analyze the response characteristics of the fuel supply circuit-particularly of the methanol reformer and gas reservoir-to determine the best measure to be adopted for overcoming the expected difficulty.

  6. GOALDS--goal based damage ship stability and safety standards.

    Science.gov (United States)

    Papanikolaou, Apostolos; Hamann, Rainer; Lee, Byung Suk; Mains, Christian; Olufsen, Odd; Vassalos, Dracos; Zaraphonitis, George

    2013-11-01

    The new probabilistic damaged stability regulations for dry cargo and passenger ships (SOLAS 2009), which entered into force on January 1, 2009, represent a major step forward in achieving an improved safety standard through the rationalisation and harmonization of damaged stability requirements. There are, however, serious concerns regarding the adopted formulation for the calculation of the survival probability of passenger ships, particularly for ROPAX and large cruise vessels. The present paper outlines the objectives, the methodology of work and main results of the EU-funded FP7 project GOALDS (Goal Based Damaged Stability, 2009-2012), which aims to address the above shortcomings by state-of-the-art scientific methods and by formulating a rational, goal-based regulatory framework, properly accounting for the damage stability properties of passenger ships and the risk of people onboard.

  7. CONSIDERING ANTI-PIRACY SHIP SECURITY: CITADEL DESIGN AND USE

    Directory of Open Access Journals (Sweden)

    L. Carral

    2015-09-01

    Full Text Available As piracy continues to pose a threat to the shipping industry, a number of measures for protecting ships, cargo and crew will need to be implemented. Along with other steps, such as deploying military rescue teams, securing the crew within a ship’s citadel has proved to be a highly effective form of self-protection against hostage-taking by pirates. From a design standpoint, aspects that should be considered include the location and dimensions of the citadel, the maximum time crew can stay within it and the specific requirements for various elements of the ship or citadel equipment. Exploiting data on pirate attacks recently occurring in High Risk Areas, this article analyses the design and use of the citadel as a self-protection measure against piracy. As a conclusion, various requirements for these structures are recommended.

  8. Crushing Strength of Ship Structures

    DEFF Research Database (Denmark)

    Cerup-Simonsen, Bo; Abramowicz, W.; Høstgaard-Brene, C.N.S.

    1999-01-01

    The crushing response of ship structures is of primary importance to the designers and practicing engineers concerned with accidental loading and accident reconstruction of marine vehicles. Ship to-ship collisions, ship-harbor infrastructure interaction or ship-offshore structure interaction are ...

  9. Crushing Strength of Ship Structures

    DEFF Research Database (Denmark)

    Cerup-Simonsen, Bo; Abramowicz, W.; Høstgaard-Brene, C.N.S.

    1999-01-01

    The crushing response of ship structures is of primary importance to the designers and practicing engineers concerned with accidental loading and accident reconstruction of marine vehicles. Ship to-ship collisions, ship-harbor infrastructure interaction or ship-offshore structure interaction are ...

  10. Linking Combat Systems Capabilities and Ship Design Through Modeling and Computer Simulation

    Science.gov (United States)

    2013-09-01

    constant at about 9.8 m/s2 (Nave 2013). • L Lift: This is the force that pushes as ship upward due to buoyancy; based upon Archimedes ’ Principle , the...the weight of the water that a ship replaces; more directly, Archimedes ’ principle tells us that it is the weight of the ship, itself, plus its cargo...is true that the basic principles of naval and engineering science have not changed, capturing the effects of any proposed change through the use

  11. Characterizing the composition of molecular motors on moving axonal cargo using "cargo mapping" analysis.

    Science.gov (United States)

    Neumann, Sylvia; Campbell, George E; Szpankowski, Lukasz; Goldstein, Lawrence S B; Encalada, Sandra E

    2014-10-30

    Understanding the mechanisms by which molecular motors coordinate their activities to transport vesicular cargoes within neurons requires the quantitative analysis of motor/cargo associations at the single vesicle level. The goal of this protocol is to use quantitative fluorescence microscopy to correlate ("map") the position and directionality of movement of live cargo to the composition and relative amounts of motors associated with the same cargo. "Cargo mapping" consists of live imaging of fluorescently labeled cargoes moving in axons cultured on microfluidic devices, followed by chemical fixation during recording of live movement, and subsequent immunofluorescence (IF) staining of the exact same axonal regions with antibodies against motors. Colocalization between cargoes and their associated motors is assessed by assigning sub-pixel position coordinates to motor and cargo channels, by fitting Gaussian functions to the diffraction-limited point spread functions representing individual fluorescent point sources. Fixed cargo and motor images are subsequently superimposed to plots of cargo movement, to "map" them to their tracked trajectories. The strength of this protocol is the combination of live and IF data to record both the transport of vesicular cargoes in live cells and to determine the motors associated to these exact same vesicles. This technique overcomes previous challenges that use biochemical methods to determine the average motor composition of purified heterogeneous bulk vesicle populations, as these methods do not reveal compositions on single moving cargoes. Furthermore, this protocol can be adapted for the analysis of other transport and/or trafficking pathways in other cell types to correlate the movement of individual intracellular structures with their protein composition. Limitations of this protocol are the relatively low throughput due to low transfection efficiencies of cultured primary neurons and a limited field of view available for

  12. Shipping Information Pipeline

    DEFF Research Database (Denmark)

    Jensen, Thomas; Vatrapu, Ravi

    2015-01-01

    This paper presents a design science approach to solving persistent problems in the international shipping eco system by creating the missing common information infrastructures. Specifically, this paper reports on an ongoing dialogue between stakeholders in the shipping industry and information s...... impacts on global trade and local economies....

  13. Shipping Information Pipeline

    DEFF Research Database (Denmark)

    Jensen, Thomas; Vatrapu, Ravi

    2015-01-01

    This paper presents a design science approach to solving persistent problems in the international shipping eco system by creating the missing common information infrastructures. Specifically, this paper reports on an ongoing dialogue between stakeholders in the shipping industry and information s...

  14. Effective and Safe Ships

    DEFF Research Database (Denmark)

    Pedersen, Preben Terndrup; Amdahl, Jørgen; Rutgersson, Olle

    1996-01-01

    A Joint Nordic Research project "Effecive and Safe Ships" is presented. The project is aiming to develop methods and tools for quantitative evaluation fo ship safety. This report is the report of the preliminary phase where the plan for the main project is developed. The objectives of the project...

  15. OPTIMAL GOODS STOWAGE IN AIR CARGO TERMINALS

    Directory of Open Access Journals (Sweden)

    Gennadiy Yun

    2011-03-01

    Full Text Available Abstract. Lack of system research done by domestic and foreign scientists in the field of optimal cargostraffic distribution problem in Air Cargo Terminal, proves necessity of investigation and optimization of thisprocess. Mathematical models and algorithms of optimal problem solving for air cargos distribution inwarehouses on the basis of established functional dependence between freight flow stowage in warehousesand transport vehicle loading (unloading processes are presented in the article.Keywords:algorithms, dimensions of air cargo terminal, effectiveness of loading-unloading processes,freight flow, models.

  16. Assessment of GNSS-based height data of multiple ships for measuring and forecasting great tsunamis

    Science.gov (United States)

    Inazu, Daisuke; Waseda, Takuji; Hibiya, Toshiyuki; Ohta, Yusaku

    2016-12-01

    Ship height positioning by the Global Navigation Satellite System (GNSS) was investigated for measuring and forecasting great tsunamis. We first examined GNSS height-positioning data of a navigating vessel. If we use the kinematic precise point positioning (PPP) method, tsunamis greater than 10-1 m will be detected by ship height positioning. Based on Automatic Identification System (AIS) data, we found that tens of cargo ships and tankers are usually identified to navigate over the Nankai Trough, southwest Japan. We assumed that a future Nankai Trough great earthquake tsunami will be observed by the kinematic PPP height positioning of an AIS-derived ship distribution, and examined the tsunami forecast capability of the offshore tsunami measurements based on the PPP-based ship height. A method to estimate the initial tsunami height distribution using offshore tsunami observations was used for forecasting. Tsunami forecast tests were carried out using simulated tsunami data by the PPP-based ship height of 92 cargo ships/tankers, and by currently operating deep-sea pressure and Global Positioning System (GPS) buoy observations at 71 stations over the Nankai Trough. The forecast capability using the PPP-based height of the 92 ships was shown to be comparable to or better than that using the operating offshore observatories at the 71 stations. We suppose that, immediately after the occurrence of a great earthquake, stations receiving successive ship information (AIS data) along certain areas of the coast would fail to acquire ship data due to strong ground shaking, especially near the epicenter. Such a situation would significantly deteriorate the tsunami-forecast capability using ship data. On the other hand, operational real-time analysis of seismic/geodetic data would be carried out for estimating a tsunamigenic fault model. Incorporating the seismic/geodetic fault model estimation into the tsunami forecast above possibly compensates for the deteriorated forecast

  17. Characterization of fleet emissions from ships through multi-individual determination of size-resolved particle emissions in a coastal area

    Science.gov (United States)

    Westerlund, Jonathan; Hallquist, Mattias; Hallquist, Åsa M.

    2015-07-01

    Shipping is becoming a major source of particulate air pollution in coastal cities. Here we describe the use of a stationary measurement site to characterize nanoparticle emissions (5.6-560 nm) from a large ship fleet (154 ships) in a harbor region of an emission control area (ECA) under real-world dilution conditions. Emission factors (EFs) are described with respect to particle number (PN), mass (PM), size and volatility. Automatic Identification System data were used to obtain information on ship class, direction, speed and acceleration. Cargo and passenger ships had similar average EFs: 2.79 ± 0.19 vs. 2.35 ± 0.20 × 1016 # (kg fuel)-1 and 2550 ± 170 vs. 2200 ± 130 mg (kg fuel)-1 respectively. The number size distributions for cargo and passenger ships were unimodal, peaking at ∼40 nm. Tug-boats and pilots emitted smaller particles with lower EFPN and EFPM. For emissions of non-volatile particles from cargo and passenger ships EFPM increased with decreasing speed and acceleration while the EFPN decreased. The size distributions of the non-volatile particles for all ships contained a large mode at ∼10 nm. This peak is believed to be formed during plume aging. A detailed understanding of size-resolved particle emissions from individual ships will be important in designing appropriate emission regulations for coastal areas.

  18. 46 CFR 31.10-21a - Periodic gauging of tank vessel midbodies more than 30 years old that carry certain oil cargoes...

    Science.gov (United States)

    2010-10-01

    ... years old that carry certain oil cargoes-TB/ALL. 31.10-21a Section 31.10-21a Shipping COAST GUARD... gauging of tank vessel midbodies more than 30 years old that carry certain oil cargoes—TB/ALL. (a) As used... years old. (2) Regaugings: (i) Midbodies of double hull tank vessels, or single hull tank vessels...

  19. 19 CFR 122.115 - Labeling of cargo.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Labeling of cargo. 122.115 Section 122.115 Customs... AIR COMMERCE REGULATIONS Transit Air Cargo Manifest (TACM) Procedures § 122.115 Labeling of cargo. A warning label, as required by § 18.4(e) of this chapter, shall be attached to all transit air cargo...

  20. 19 CFR 4.38 - Release of cargo.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Release of cargo. 4.38 Section 4.38 Customs Duties... VESSELS IN FOREIGN AND DOMESTIC TRADES Landing and Delivery of Cargo § 4.38 Release of cargo. (a) No... report which lists those shipments which have been authorized for release. This alternative cargo...

  1. 49 CFR 1548.21 - Screening of cargo.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 9 2010-10-01 2010-10-01 false Screening of cargo. 1548.21 Section 1548.21... cargo. An IAC may only screen cargo for transport on a passenger aircraft under §§ 1544.205 and 1546.205 if the IAC is a certified cargo screening facility as provided in part 1549....

  2. 19 CFR 4.33 - Diversion of cargo.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Diversion of cargo. 4.33 Section 4.33 Customs... VESSELS IN FOREIGN AND DOMESTIC TRADES Landing and Delivery of Cargo § 4.33 Diversion of cargo. (a) Unlading at other than original port of destination. A vessel may unlade cargo or baggage at an...

  3. Design of heavy lift cargo aircraft

    Data.gov (United States)

    National Aeronautics and Space Administration — This is the bird of the skies of the future. The heavy lift cargo aircraft which is currently being developed by me has twice the payload capacity of an Antonov...

  4. High-speed quantum networking by ship

    Science.gov (United States)

    Devitt, Simon J.; Greentree, Andrew D.; Stephens, Ashley M.; van Meter, Rodney

    2016-11-01

    Networked entanglement is an essential component for a plethora of quantum computation and communication protocols. Direct transmission of quantum signals over long distances is prevented by fibre attenuation and the no-cloning theorem, motivating the development of quantum repeaters, designed to purify entanglement, extending its range. Quantum repeaters have been demonstrated over short distances, but error-corrected, global repeater networks with high bandwidth require new technology. Here we show that error corrected quantum memories installed in cargo containers and carried by ship can provide a exible connection between local networks, enabling low-latency, high-fidelity quantum communication across global distances at higher bandwidths than previously proposed. With demonstrations of technology with sufficient fidelity to enable topological error-correction, implementation of the quantum memories is within reach, and bandwidth increases with improvements in fabrication. Our approach to quantum networking avoids technological restrictions of repeater deployment, providing an alternate path to a worldwide Quantum Internet.

  5. High-speed quantum networking by ship.

    Science.gov (United States)

    Devitt, Simon J; Greentree, Andrew D; Stephens, Ashley M; Van Meter, Rodney

    2016-11-02

    Networked entanglement is an essential component for a plethora of quantum computation and communication protocols. Direct transmission of quantum signals over long distances is prevented by fibre attenuation and the no-cloning theorem, motivating the development of quantum repeaters, designed to purify entanglement, extending its range. Quantum repeaters have been demonstrated over short distances, but error-corrected, global repeater networks with high bandwidth require new technology. Here we show that error corrected quantum memories installed in cargo containers and carried by ship can provide a exible connection between local networks, enabling low-latency, high-fidelity quantum communication across global distances at higher bandwidths than previously proposed. With demonstrations of technology with sufficient fidelity to enable topological error-correction, implementation of the quantum memories is within reach, and bandwidth increases with improvements in fabrication. Our approach to quantum networking avoids technological restrictions of repeater deployment, providing an alternate path to a worldwide Quantum Internet.

  6. Assessment of the risk of transporting plutonium dioxide by cargo aircraft

    Energy Technology Data Exchange (ETDEWEB)

    McSweeney, T.I.; Johnson, J.F.

    1977-06-01

    To enable easy comparison, all the plutonium shipping evaluations have used the same bases. In each, the results have been related to a future time--the early 1980s--when plutonium shipments are expected to be more frequent. The characteristics of the nuclear economy used in this analysis are: A total of 18 metric tons (MT) of plutonium is shipped annually, via the mode being evaluated. 100 kg of plutonium are transported per shipment. For air shipment, a truck and air segment are considered. The average shipping distance per shipment is 1,422 miles with 14 percent of the distance being by truck. Shipping systems and regulations are the same as in 1974. PuO/sub 2/ is shipped in 6M containers. The use of other shipping conditions could result in different risks than reported here. For the purposes of this study, plutonium dioxide was assumed to be carried exclusively in the 15-gal version of the 6M container. Unless otherwise noted, all references to 6M containers in the report refer to this particular size. Based on the shipping assumptions, the likelihood that an aircraft carrying a shipment will be involved in an accident is estimated to be about once in 450 years. For the projected shipping rate in the early 1980s, the likelihood of a release of plutonium as a result of shipment by air is one in 900 years for dioxide powder in the 6M container. The comparison of the truck and air transport modes for the same material showed truck transport to have less risk. At the same time, the air transport of plutonium dioxide was demonstrated to have a lower risk than other commonly accepted societal risks. The major contributor to the overall risk spectra for air transport was a cargo airplane, carrying plutonium dioxide, crashing at high speed into hard rock.

  7. Software For Nearly Optimal Packing Of Cargo

    Science.gov (United States)

    Fennel, Theron R.; Daughtrey, Rodney S.; Schwaab, Doug G.

    1994-01-01

    PACKMAN computer program used to find nearly optimal arrangements of cargo items in storage containers, subject to such multiple packing objectives as utilization of volumes of containers, utilization of containers up to limits on weights, and other considerations. Automatic packing algorithm employed attempts to find best positioning of cargo items in container, such that volume and weight capacity of container both utilized to maximum extent possible. Written in Common LISP.

  8. OPTIMAL GOODS STOWAGE IN AIR CARGO TERMINALS

    OpenAIRE

    Yun, Gennadiy; Gyrych, Victoria

    2011-01-01

    Abstract. Lack of system research done by domestic and foreign scientists in the field of optimal cargostraffic distribution problem in Air Cargo Terminal, proves necessity of investigation and optimization of thisprocess. Mathematical models and algorithms of optimal problem solving for air cargos distribution inwarehouses on the basis of established functional dependence between freight flow stowage in warehousesand transport vehicle loading (unloading) processes are presented in the articl...

  9. Sulina and Danube-Black Sea Channels: Competitors or Allies on Cargo Transport in South-Eastern Europe?

    Directory of Open Access Journals (Sweden)

    Ionica Soare

    2015-10-01

    Full Text Available The two river channels which connect the Black Sea to the inland Romanian area, have constituted since the beginning of their building two very important transport routes for the cargo and passenger traffic (Sulina that have connected Black Sea to the internal ports of Romania, thus representing ”transport highways” of the Romanian economy. The present study tries to present the chronological evolution of these two shipping routes, regarding their importance to the cargo traffic, as well as the financial policy imposed by the administration of these channels. We will present and analyze retrospectively the major elements regarding the administration of these channels, a comparative analysis of the role of these two channels in the river cargo transport, consequently trying to predict a future evolution of these two river communication routes.

  10. A Heuristic and Hybrid Method for the Tank Allocation Problem in Maritime Bulk Shipping

    DEFF Research Database (Denmark)

    Vilhelmsen, Charlotte; Larsen, Jesper; Lusby, Richard Martin

    Many bulk ships have multiple tanks and can thereby carry multiple inhomogeneous products at a time. A major challenge when operating such ships is how to best allocate cargoes to available tanks while taking tank capacity, safety restrictions, ship stability and strength as well as other...... above is an operational planning problem but it also arises as a subproblem in tactical planning when routing bulk ship eets. For each considered route, the TAP must be solved to assess route feasibility with respect to stowage. If the routing problem is solved in a way that requires assessment...... ship route. We have developed a randomised heuristic for eciently nding feasible allocations and computational results show that it can solve 99% of the considered instances within 0.5 seconds and all of them if allowed longer time. The heuristic is designed to work as an ecient subproblem solver...

  11. Neutrino physics with SHIP

    CERN Document Server

    van Herwijnen, Eric

    2016-01-01

    SHIP is a new general purpose fixed target facility, whose Technical Proposal has been recently reviewed by the CERN SPS Committee. It recommended that the experiment proceed further to a Comprehensive Design phase. In its initial phase, the 400 GeV proton beam extracted from the SPS will be dumped on a heavy target with the aim of integrating 2×1020 POT (Protons On Target) in 5 years. A dedicated detector, based on a long vacuum tank followed by a spectrometer and particle identification detectors, will allow probing a variety of models with light long-lived exotic particles and masses below O(10) GeV/c 2 . The main focus will be the physics of the so-called Hidden Portals. The sensitivity to Heavy Neutrinos will allow to probe for the first time the mass range between the kaon and the charm meson mass, and a range of couplings for which Baryogenesis and active neutrino masses could also be explained. Another dedicated detector will allow the study of neutrino cross-sections and angular distributions. ντ ...

  12. Diffusion-Limited Cargo Loading of an Engineered Protein Container.

    Science.gov (United States)

    Zschoche, Reinhard; Hilvert, Donald

    2015-12-30

    The engineered bacterial nanocompartment AaLS-13 is a promising artificial encapsulation system that exploits electrostatic interactions for cargo loading. In order to study its ability to take up and retain guests, a pair of fluorescent proteins was developed which allows spectroscopic determination of the extent of encapsulation by Förster resonance energy transfer (FRET). The encapsulation process is generally complete within a second, suggesting low energetic barriers for proteins to cross the capsid shell. Formation of intermediate aggregates upon mixing host and guest in vitro complicates capsid loading at low ionic strength, but can be sidestepped by increasing salt concentrations or diluting the components. Encapsulation of guests is completely reversible, and the position of the equilibrium is easily tuned by varying the ionic strength. These results, which challenge the notion that AaLS-13 is a continuous rigid shell, provide valuable information about cargo loading that will guide ongoing efforts to engineer functional host-guest complexes. Moreover, it should be possible to adapt the protein FRET pair described in this report to characterize functional capsid-cargo complexes generated by other encapsulation systems.

  13. On the possibility of the in-cell molecular motors working as cargo moorings only

    CERN Document Server

    Lisowski, Bartosz

    2012-01-01

    Although active transport is considered the most efficient way of depositing materials in the appropriate compartments within living cells, free diffusion remains the energetically cheapest and most widespread determinant of the in-cell dynamics. Here we investigate the hypothesis of cargoes - vesicles or organelles - being transported by the means of free diffusion, limited spatially by the molecular motors. Routinely navigating through ever-changing and unsteady environment, utilizing chemical energy (e.g. from hydrolyzing ATP), as the result they transport cell's crucial components, such as neurotransmitters and organelles. In our model the motor, which we identify with kinesin-1 walking along the microtubule, tethers the cargo in the same manner as a mooring rope attached to a bollard holds a ship from drifting toward the open sea. We study the model behavior in the context of optical trap single molecule experiments, mimicking their procedures in our simulations and investigate how the mechanical propert...

  14. Characterizing X-ray Attenuation of Containerized Cargo

    Energy Technology Data Exchange (ETDEWEB)

    Birrer, N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Divin, C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Glenn, S. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Martz, H. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Wang, G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-08-02

    X-ray inspection systems can be used to detect radiological and nuclear threats in imported cargo. In order to better understand performance of these systems, the attenuation characteristics of imported cargo need to be determined. This project focused on developing image processing algorithms for segmenting cargo and using x-ray attenuation to quantify equivalent steel thickness to determine cargo density. These algorithms were applied to over 450 cargo radiographs. The results are summarized in this report.

  15. Ship construction and welding

    CERN Document Server

    Mandal, Nisith R

    2017-01-01

    This book addresses various aspects of ship construction, from ship types and construction materials, to welding technologies and accuracy control. The contents of the book are logically organized and divided into twenty-one chapters. The book covers structural arrangement with longitudinal and transverse framing systems based on the service load, and explains basic structural elements like hatch side girders, hatch end beams, stringers, etc. along with structural subassemblies like floors, bulkheads, inner bottom, decks and shells. It presents in detail double bottom construction, wing tanks & duct keels, fore & aft end structures, etc., together with necessary illustrations. The midship sections of various ship types are introduced, together with structural continuity and alignment in ship structures. With regard to construction materials, the book discusses steel, aluminum alloys and fiber reinforced composites. Various methods of steel material preparation are discussed, and plate cutting and form...

  16. Plastic Pollution from Ships

    OpenAIRE

    Čulin, Jelena; Bielić, Toni

    2016-01-01

    The environmental impact of shipping on marine environment includes discharge of garbage. Plastic litter is of particular concern due to abundance, resistance to degradation and detrimental effect on marine biota. According to recently published studies, a further research is required to assess human health risk. Monitoring data indicate that despite banning plastic disposal at sea, shipping is still a source of plastic pollution. Some of the measures to combat the problem are discussed.

  17. SHIPPING REQUESTS ON EDH

    CERN Multimedia

    Logistics Group

    2001-01-01

    Users are informed that as from 1 September 2001 all Shipping Requests must be made on EDH using the appropriate electronic form. The submission of user requests directly into EDH will help rationalise the activities of the Shipping Service (Import & Export), with requests being automatically forwarded to hierarchical supervisors thereby improving the processing speed and facilitating the follow-up. Thank you for your collaboration.

  18. SHIPPING REQUESTS ON EDH

    CERN Multimedia

    Logistics Group

    2001-01-01

    Users are informed that as from 1 September 2001 all Shipping Requests must be made on EDH using the appropriate electronic form. The submission of user requests directly into EDH will help rationalise the activities of the Shipping Service (Import & Export), with requests being automatically forwarded to hierarchical supervisors thereby improving the processing speed and facilitating the follow-up. Thank you for your collaboration.

  19. Ship bow waves

    Institute of Scientific and Technical Information of China (English)

    NOBLESSE Francis; DELHOMMEAU Gerard; LIU Hua; WAN De-cheng; YANG Chi

    2013-01-01

    The bow wave generated by a ship hull that advances at constant speed in calm water is considered.The bow wave only depends on the shape of the ship bow (not on the hull geometry aft of the bow wave).This basic property makes it possible to determine the bow waves generated by a canonical family of ship bows defined in terms of relatively few parameters.Fast ships with fine bows generate overturning bow waves that consist of detached thin sheets of water,which are mostly steady until they hit the main free surface and undergo turbulent breaking up and diffusion.However,slow ships with blunt bows create highly unsteady and turbulent breaking bow waves.These two alternative flow regimes are due to a nonlinear constraint related to the Bernoulli relation at the free surface.Recent results about the overturning and breaking bow wave regimes,and the boundary that divides these two basic flow regimes,are reviewed.Questions and conjectures about the energy of breaking ship bow waves,and free-surface effects on flow circulation,are also noted.

  20. Numerical Study on the Effect of Buffer Bow Structure in Ship-to-ship Collisions

    DEFF Research Database (Denmark)

    Yamada, Yasuhira; Endo, Hisayoshi; Pedersen, Preben Terndrup

    2005-01-01

    structure in ship-ship collisions as compared with that of standard bulbous bows. This is demonstrated by conducting a series of large-scale finite element analyses. The finite element analyses are conducted with the general-purpose nonlinear structural code “LS-DYNA”. The applied scenario is one where......) and the forward velocity of the struck ship on the collapse mode of the bow of the striking vessel are investigated. Collapse modes, contact forces and energy absorption capabilities of the buffer bows are compared with those of conventional bows....

  1. Outer Dynamics of Ship Collisions

    DEFF Research Database (Denmark)

    Pedersen, Preben Terndrup

    1996-01-01

    The purpose is to present analysis procedures for the motion of ships during ship-ship collisions and for ship collisions with offshore structures. The aim is to estimate that part of the lost kinetic energy which will have to be absorbed by rupture and plastic damage of the colliding structures....

  2. Outer Dynamics of Ship Collisions

    DEFF Research Database (Denmark)

    Pedersen, Preben Terndrup

    1996-01-01

    The purpose of these notes is to present analysis procedures for the motion of ships during ship-ship collisions and for ship collisons with offshore structures. The aim is to estimate that part of the lost kinetic energy which will have to be absorbed by rupture and plastic damage of the collidi...

  3. Economic Possibilities of Shipping though Northern Sea Route1

    Directory of Open Access Journals (Sweden)

    Sung-Woo Lee

    2014-12-01

    Full Text Available Global warming and climate change haves brought a new issue in the Arctic sea. Therefore, we can now explore new shipping routes through the Arctic Ocean instead of the existing commercial route. In particular, the Northern Sea Route (NSR is one of the feasible shipping routes and, has provided tremendous shipping benefits. If the NSR becomes commercialized, we will be able to save about 5,000 nautical miles in distance and sailing time. In this study, we will emphasize some of the important results on the possibility of commercializing the shipping route in the Arctic. The NSR may bring positive economic effects in terms of shipping distance and time. For example, when utilizing the NSR, the maximum cargo traffic between Asia and Europe is expected to be around 46 million TEU. However, we also need to consider an expensive passage fee that is currently imposed by Russia. In conclusion, we maintain our efforts to protect the environment in the Arctic, in terms of logistics, and we need to explore every possible avenue to bring possible economic benefits to the North Pacific countries.

  4. SOME PROBLEMS ABOUT SHIP WAVES

    Institute of Scientific and Technical Information of China (English)

    Liu Min-jia

    2003-01-01

    Several problems about ship waves were discussed in the dissertation:(1) Transient ship waves from calmness to the generation of steady-state ship waves were described. (2) The procedure of the formation of the V-shaped steady-state ship waves were clearly shown, and the difference of ship waves on an inviscid fluid and on a viscous fluid was exmined. (3) With the Lighthill two-stage scheme, the algebraic expression for ship waves on a viscous fluid of finite depth was obtained.(4) Singularity on the two boundaries of the ship waves was treated.

  5. The influence of ship's stability on safety of navigation

    Science.gov (United States)

    Hanzu-Pazara, R.; Duse; Varsami, C.; Andrei, C.; Dumitrache, R.

    2016-08-01

    Ship's stability is one of the most important and complex concept about safety of ship and safety of navigation and it is governed by maritime law as well as maritime codes. The paper presents the importance of ship's intact stability as part of the general concept of ship's seaworthiness. There is always a correlation between ship’ stability and safety of ship and safety of navigation. Loss of ship's stability is presented as a threat to safety of navigation. We are going to present the causes that lead to ship stability failure and their impact on safety of navigation. A study of various ship stability casualties in heavy weather conditions are going to be presented, the causes are going to be analyzed and the possible ways of stability failures are assessed. Vessel's intact stability is a fundamental component of seaworthiness so it is in the interest of all owners/operators to learn about this topic and ensure that their vessel possesses a satisfactory level of stability in order to ensure its safety as well as that of the people on board the ship. Understanding ship's stability, trim, stress, and the basics of ship's construction is a key to keeping a ship seaworthy. The findings of this study can be beneficial to the maritime safety administrations to adopt decision-making on maritime safety management, but it is also important to carry out statistics and analysis of marine casualties to help to adopt proper safety management measures. Moreover, the study can be a useful guidance for masters and officers on board vessel in order to understand the factors that contribute to ship stability failure during the voyage not only in port during loading operations and to take preventive measures to avoid to put the ship in such a dangerous situations.

  6. Uncertainty Quantification for Cargo Hold Fires

    CERN Document Server

    DeGennaro, Anthony M; Martinelli, Luigi; Rowley, Clarence W

    2015-01-01

    The purpose of this study is twofold -- first, to introduce the application of high-order discontinuous Galerkin methods to buoyancy-driven cargo hold fire simulations, second, to explore statistical variation in the fluid dynamics of a cargo hold fire given parameterized uncertainty in the fire source location and temperature. Cargo hold fires represent a class of problems that require highly-accurate computational methods to simulate faithfully. Hence, we use an in-house discontinuous Galerkin code to treat these flows. Cargo hold fires also exhibit a large amount of uncertainty with respect to the boundary conditions. Thus, the second aim of this paper is to quantify the resulting uncertainty in the flow, using tools from the uncertainty quantification community to ensure that our efforts require a minimal number of simulations. We expect that the results of this study will provide statistical insight into the effects of fire location and temperature on cargo fires, and also assist in the optimization of f...

  7. Optimization of the air cargo supply chain

    Directory of Open Access Journals (Sweden)

    María Pérez Bernal

    2012-10-01

    Full Text Available Purpose: This paper aims to evaluate and optimize the various operations within the air cargo chain. It pursues to improve the efficiency of the air cargo supply chain and to provide more information to the decision-makers to optimize their fields.Design/methodology/approach: The method used is a process simulation modelling software, WITNESS, which provides information to the decision-makers about the most relevant parameters subject to optimization. The input for the simulation is obtained from a qualitative analysis of the air cargo supply chain with the involved agents and from a study of the external trade by air mode, given that their behaviour depend on the location. The case study is focused on a particular location, the Case of Zaragoza Airport (Spain.Findings: This paper demonstrates that efficiency of the air cargo supply chain can increase by leveraging several parameters such as bottlenecks, resources or warehouses.Originality/value: It explores the use of a simulation modeling software originally intended for manufacturing processes and extended to support decision making processes in the area of air cargo.

  8. Accidents in nuclear ships

    Energy Technology Data Exchange (ETDEWEB)

    Oelgaard, P.L. [Risoe National Lab., Roskilde (Denmark)]|[Technical Univ. of Denmark, Lyngby (Denmark)

    1996-12-01

    This report starts with a discussion of the types of nuclear vessels accidents, in particular accidents which involve the nuclear propulsion systems. Next available information on 61 reported nuclear ship events in considered. Of these 6 deals with U.S. ships, 54 with USSR ships and 1 with a French ship. The ships are in almost all cases nuclear submarines. Only events that involve the sinking of vessels, the nuclear propulsion plants, radiation exposures, fires/explosions, sea-water leaks into the submarines and sinking of vessels are considered. For each event a summary of available information is presented, and comments are added. In some cases the available information is not credible, and these events are neglected. This reduces the number of events to 5 U.S. events, 35 USSR/Russian events and 1 French event. A comparison is made between the reported Soviet accidents and information available on dumped and damaged Soviet naval reactors. It seems possible to obtain good correlation between the two types of events. An analysis is made of the accident and estimates are made of the accident probabilities which are found to be of the order of 10{sup -3} per ship reactor years. It if finally pointed out that the consequences of nuclear ship accidents are fairly local and does in no way not approach the magnitude of the Chernobyl accident. It is emphasized that some of the information on which this report is based, may not be correct. Consequently some of the results of the assessments made may not be correct. (au).

  9. Robot mother ship design

    Science.gov (United States)

    Budulas, Peter P.; Young, Stuart H.; Emmerman, Philip J.

    2000-07-01

    Small physical agents will be ubiquitous on the battlefield of the 21st century, principally to lower the exposure to harm of our ground forces. Teams of small collaborating physical agents conducting tasks such as Reconnaissance, Surveillance, and Target Acquisition (RSTA); chemical and biological agent detection, logistics, sentry; and communications relay will have advanced sensor and mobility characteristics. The mother ship much effectively deliver/retrieve, service, and control these robots as well as fuse the information gathered by these highly mobile robot teams. The mother ship concept presented in this paper includes the case where the mother ship is itself a robot or a manned system. The mother ship must have long-range mobility to deploy the small, highly maneuverable agents that will operate in urban environments and more localized areas, and act as a logistics base for the robot teams. The mother ship must also establish a robust communications network between the agents and is an up-link point for disseminating the intelligence gathered by the smaller agents; and, because of its global knowledge, provides the high-level information fusion, control and planning for the collaborative physical agents. Additionally, the mother ship incorporates battlefield visualization, information fusion, and multi-resolution analysis, and intelligent software agent technology, to support mission planning and execution. This paper discusses on going research at the U.S. Army Research Laboratory that supports the development of a robot mother ship. This research includes docking, battlefield visualization, intelligent software agents, adaptive communications, information fusion, and multi- modal human computer interaction.

  10. Cargo binding to Atg19 unmasks additional Atg8 binding sites to mediate membrane-cargo apposition during selective autophagy.

    Science.gov (United States)

    Sawa-Makarska, Justyna; Abert, Christine; Romanov, Julia; Zens, Bettina; Ibiricu, Iosune; Martens, Sascha

    2014-05-01

    Autophagy protects cells from harmful substances such as protein aggregates, damaged mitochondria and intracellular pathogens, and has been implicated in a variety of diseases. Selectivity of autophagic processes is mediated by cargo receptors that link cargo to Atg8 family proteins on the developing autophagosomal membrane. To avoid collateral degradation during constitutive autophagic pathways, the autophagic machinery must not only select cargo but also exclude non-cargo material. Here we show that cargo directly activates the cargo receptor Atg19 by exposing multiple Atg8 binding sites. Furthermore, Atg19 mediates tight apposition of the cargo and Atg8-coated membranes in a fully reconstituted system. These properties are essential for the function of Atg19 during selective autophagy in vivo. Our results suggest that cargo receptors contribute to tight membrane bending of the isolation membrane around the cargo.

  11. Characterizing Complexity of Containerized Cargo X-ray Images

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Guangxing [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Martz, Harry [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Glenn, Steven [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Divin, Charles [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Birrer, Nat [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-08-19

    X-ray imaging can be used to inspect cargos imported into the United States. In order to better understand the performance of X-ray inspection systems, the X-ray characteristics (density, complexity) of cargo need to be quantified. In this project, an image complexity measure called integrated power spectral density (IPSD) was studied using both DNDO engineered cargos and stream-of-commerce (SOC) cargos. A joint distribution of cargo density and complexity was obtained. A support vector machine was used to classify the SOC cargos into four categories to estimate the relative fractions.

  12. Motility states in bidirectional cargo transport

    CERN Document Server

    Klein, Sarah; Santen, Ludger

    2015-01-01

    Intracellular cargos which are transported by molecular motors move stochastically along cytoskeleton filaments. In particular for bidirectionally transported cargos it is an open question whether the characteristics of their motion can result from pure stochastic fluctuations or whether some coordination of the motors is needed. The results of a mean-field model of cargo-motors dynamics, which was proposed by M\\"uller et al.[1] suggest the existence of high motility states which would result from a stochastic tug-of-war. Here we analyze a non-mean field extension of their model, that takes explicitly the position of each motor into account. We find that high motility states then disappear. We consider also a mutual motor-motor activation, as an explicit mechanism of motor coordination. We show that the results of the mean-field model are recovered only in case of a strong motor-motor activation in the limit of a high number of motors.

  13. Fluctuation effects in bidirectional cargo transport

    CERN Document Server

    Klein, Sarah; Santen, Ludger

    2014-01-01

    We discuss a theoretical model for bidirectional cargo transport in biological cells, which is driven by teams of molecular motors and subject to thermal fluctuations. The model describes explicitly the directed motion of the molecular motors on the filament. The motor-cargo coupling is implemented via linear springs. By means of extensive Monte Carlo simulations we show that the model describes the experimentally observed regimes of anomalous diffusion, i.e. subdiffusive behavior at short times followed by superdiffusion at intermediate times. The model results indicate that subdiffuse regime is induced by thermal fluctuations while the superdiffusive motion is generated by correlations of the motors' activity. We also tested the efficiency of bidirectional cargo transport in crowded areas by measuring its ability to pass barriers with increased viscosity. Our results show a remarkable gain of efficiency for high viscosities.

  14. Crushing of ship bows in head-on collision

    DEFF Research Database (Denmark)

    Ocakli, H.; Zhang, S.; Pedersen, Preben Terndrup

    2004-01-01

    Semi-analytical methods for analysis of plate crushing and ship bow damage in head-on collisions are developed in this paper. Existing experimental and theoretical studies for crushing analysis of plated structures are summarized and compared. Simple formulae for determining the crushing force....... The approach developed can be used easily to determine the crushing resistance and damage extent of the ship bow when ship length and collision speed are known. The method can be used in probabilistic analysis of damage extents in ship collisions where a large number of calculations are generally required....

  15. Study on a PEFC propulsion system for surface ships

    Energy Technology Data Exchange (ETDEWEB)

    Ono, Ryuta [Ishikawajima-Harima Heavy Industries Co., Ltd., Tokyo (Japan); Tsuchiyama, Syozo [Shipbuilding Research Association, Tokyo (Japan)

    1996-12-31

    This Abstract summarizes a series of presentations to the present Seminar, covering various aspects of a 1,000 kW PEFC system envisaged as propulsion system to equip a 1,500 DWT Cargo vessel, reported under the following titles: (1) Performance Evaluation of 1kW PEFC (2) Performance of Catalysts for CO Removal by Methanation Reaction (3) Development of a Selective Oxidation CO Removal Reactor for Methanol Reformate Gas (4) Experimental Investigation on a Turbine Compressor for Air Supply System of a Fuel Cell (5) Dynamic Simulator for PEFC Propulsion Plant (6) Power Feature Required for PEFC Powered Electric Propulsion Ship The purpose of this study is to identify subjects requiring further development toward the realization of a practical fuel cell system to power ships.

  16. Dossier Super Ships. Special on Offshore; Dossier Superschepen. Special Offshore

    Energy Technology Data Exchange (ETDEWEB)

    Van Velzen, T.; Biesboer, F.; Akkermans, J.

    2010-02-26

    In 5 articles attention is paid to the offshore industry focusing on the use of ships (1) capacity of cargo carriers; (2) problems with regard to the Nord Stream pipeline for the transport of natural gas; (3) energy efficient ships; (4) foundations for offshore wind turbines; and (5) on the platform Perdido, the offshoreproject in the Gulf of Mexico. [Dutch] In 5 artikelen wordt aandacht besteed aan de offshore industrie met de nadruk op het gebruik van schepen: (1) capaciteit van containerschepen voor transport; (2) problemen met de aanleg van de Nord Stream aardgaspijpleiding; (3) energie efficiente vaartuigen; (4) funderingspalen voor windturbines op zee; en (5) over het platform Perdido, het offshoreproject in de Golf van Mexico.

  17. Study on a PEFC propulsion system for surface ships

    Energy Technology Data Exchange (ETDEWEB)

    Ono, Ryuta [Ishikawajima-Harima Heavy Industries Co., Ltd., Tokyo (Japan); Tsuchiyama, Syozo [Shipbuilding Research Association, Tokyo (Japan)

    1996-12-31

    This Abstract summarizes a series of presentations to the present Seminar, covering various aspects of a 1,000 kW PEFC system envisaged as propulsion system to equip a 1,500 DWT Cargo vessel, reported under the following titles: (1) Performance Evaluation of 1kW PEFC (2) Performance of Catalysts for CO Removal by Methanation Reaction (3) Development of a Selective Oxidation CO Removal Reactor for Methanol Reformate Gas (4) Experimental Investigation on a Turbine Compressor for Air Supply System of a Fuel Cell (5) Dynamic Simulator for PEFC Propulsion Plant (6) Power Feature Required for PEFC Powered Electric Propulsion Ship The purpose of this study is to identify subjects requiring further development toward the realization of a practical fuel cell system to power ships.

  18. Liner Shipping Fleet Repositioning

    DEFF Research Database (Denmark)

    Tierney, Kevin; Jensen, Rune Møller

    2011-01-01

    , can be accurately modeled. Numerous liner shipping fleet repositioning problems are solved each year by the world’s shipping firms without the assistance of any decision support, even though humans can require between two to three days to find a reasonable solution. Finding optimal repositionings...... to complex handling and timing restrictions. The objective of the problem is cost minimization, which translates nearly directly into the minimization of CO2 emissions and pollution. Additionally, it is important that all cost elements, including the ones that are only loosely coupled with activity choices...

  19. Shipping emissions in ports

    OpenAIRE

    2014-01-01

    Shipping emissions in ports are substantial, accounting for 18 million tonnes of CO2 emissions, 0.4 million tonnes of NOx, 0.2 million of SOx and 0.03 million tonnes of PM10 in 2011. Around 85% of emissions come from containerships and tankers. Containerships have short port stays, but high emissions during these stays. Most of CO2 emissions in ports from shipping are in Asia and Europe (58%), but this share is low compared to their share of port calls (70%). European ports have much less emi...

  20. Predicting Ship Fuel Consumption: Update.

    Science.gov (United States)

    1996-07-01

    ship propulsion fuel consumption as a function of ship speed for U.S. Navy combatant and auxiliary ships. Prediction is based on fitting an analytic function to published ship class speed-fuel use data using nonlinear regression. The form of the analytic function fitted is motivated by the literature on ship powering and resistance. The report discusses data sources and data issues, and the impact of ship propulsion plant configuration on fuel use. The regression coefficients of the exponential function fitted, tabular numerical comparison of

  1. Linking molecular motors to membrane cargo

    NARCIS (Netherlands)

    A.S. Akhmanova (Anna); J.A. Hammer (John)

    2010-01-01

    textabstractThree types of motors, myosins, kinesins, and cytoplasmic dynein, cooperate to transport intracellular membrane organelles. Transport of each cargo is determined by recruitment of specific sets of motors and their regulation. Targeting of motors to membranes often depends on the formatio

  2. 78 FR 68784 - Cargo Securing Manuals

    Science.gov (United States)

    2013-11-15

    ... would authorize recognized classification societies or other approval authorities to review and approve.... The commenter said the NPRM did not adequately assess the economic impact of applying cargo securing... not calculate any regulatory economic impact on them. Seagoing barges in coastwise trade would not be...

  3. Cargo Integration Products for External Release

    Science.gov (United States)

    Sills, Joel W.

    2008-01-01

    This document consists of a listing of integration products by function: Reconfiguration Engineering, Payload Interface Requirements, and Cargo Integration Analysis. The products may be accessed from, the Flight Operation and Integration Office page, i.e. http://sspweb.jsc.nasa.gov/.

  4. Stochastic Movement of Multiple Motor Transported Cargo

    Science.gov (United States)

    Ando, David; Gopinathan, Ajay; Xu, Jing

    2015-03-01

    Experimental observations of cargo position during transport by multiple motors are determined by several coupled stochastic processes. During collective transport, each motor can transition between multiple kinetic states, with the state of each motor influencing the states of the others via mechanical coupling through a common cargo. We measured the motion of a micron sized bead as it is transported by two kinesin motors along a single microtubule track, focusing on cargo displacements which are both axial and transverse to the microtubule. We model the effects of inter-motor interference and the state of each motor throughout time, and back out motor properties using a systematic comparison of experimental observations with simulated model traces over a wide parameter space. Our model captures a surface-associated mode of kinesin, which is only accessible via inter-motor interference in groups, in which kinesin diffuses along the microtubule surface and rapidly ``hops'' between protofilaments without dissociating from the microtubule. This enhances local exploration of the microtubule surface, possibly enabling cellular cargos to overcome macromolecular crowding and to navigate obstacles along micro- tubule tracks without sacrificing overall travel distance.

  5. The Bøle ship, Skien, Norway - Research history, dendrochronology and provenance

    DEFF Research Database (Denmark)

    Daly, Aoife; Nymoen, Pål

    2008-01-01

    The wreck-site at Bøle near Skien was first reported in 1950 during dredging in the river. The Bøle ship is one of the most significant medieval ship-finds in Norway, and the manner of its discovery is referred to as a tragedy in ship archaeology. New investigations at the site in 2004–2006 revea......The wreck-site at Bøle near Skien was first reported in 1950 during dredging in the river. The Bøle ship is one of the most significant medieval ship-finds in Norway, and the manner of its discovery is referred to as a tragedy in ship archaeology. New investigations at the site in 2004......–2006 revealed more fragments from the vessel and its cargo, and the ship is now the object of new studies. This article presents a description of the ship and its context, and the results of an initial dendrochronological analysis and provenance determination.© 2007 The Authors...

  6. Assembly and Mechanical Properties of the Cargo-Free and Cargo-Loaded Bacterial Nanocompartment Encapsulin.

    Science.gov (United States)

    Snijder, Joost; Kononova, Olga; Barbu, Ioana M; Uetrecht, Charlotte; Rurup, W Frederik; Burnley, Rebecca J; Koay, Melissa S T; Cornelissen, Jeroen J L M; Roos, Wouter H; Barsegov, Valeri; Wuite, Gijs J L; Heck, Albert J R

    2016-08-08

    Prokaryotes mostly lack membranous compartments that are typical of eukaryotic cells, but instead, they have various protein-based organelles. These include bacterial microcompartments like the carboxysome and the virus-like nanocompartment encapsulin. Encapsulins have an adaptable mechanism for enzyme packaging, which makes it an attractive platform to carry a foreign protein cargo. Here we investigate the assembly pathways and mechanical properties of the cargo-free and cargo-loaded nanocompartments, using a combination of native mass spectrometry, atomic force microscopy and multiscale computational molecular modeling. We show that encapsulin dimers assemble into rigid single-enzyme bacterial containers. Moreover, we demonstrate that cargo encapsulation has a mechanical impact on the shell. The structural similarity of encapsulins to virus capsids is reflected in their mechanical properties. With these robust mechanical properties encapsulins provide a suitable platform for the development of nanotechnological applications.

  7. Classification of Ship Routing and Scheduling Problems in Liner Shipping

    DEFF Research Database (Denmark)

    Kjeldsen, Karina Hjortshøj

    2011-01-01

    This article provides a classification scheme for ship routing and scheduling problems in liner shipping in line with the current and future operational conditions of the liner shipping industry. Based on the classification, the literature is divided into groups whose main characteristics...

  8. A LARGE-SCALE SIMULATION OF INTERNATIONAL MARITIME CONTAINER SHIPPING CONSIDERING OPTIMAL BEHAVIOR OF SHIPPERS AND OCEANGOING CARRIERS

    Science.gov (United States)

    Shibasaki, Ryuichi; Watanabe, Tomihiro; Ieda, Hitoshi

    This paper develops a large-scale simulation model of international maritime container shipping industry considering optimal behaviors of both shippers and oceangoing carriers, in order to measure impact of port and international logistics policies for each country including Japan. Concretely, the authors develop a short-term model (income maximization model of carriers) including shippers' choice of carrier when maritime cargo shipping demand between ports are given and a mid-term model (Nash equilibrium model of shippers and carriers) including shippers' choice of import/export port and route of hinterland transport and carriers' profit maximization behavior when cargo shipping demand between regions are given. The developed model is applied to the actual large-scale international maritime container shipping network in Eastern Asia. From a trial calculation based on the actual cargo shipping demand, the performance of the model is validated in terms of convergency and reproducibility. Also, the sensitivity of the model output taking the actual port policies into account is confirmed.

  9. Mechanics of Ship Grounding

    DEFF Research Database (Denmark)

    Pedersen, Preben Terndrup

    1996-01-01

    In these notes first a simplified mathematical model is presented for analysis of ship hull loading due to grounding on relatively hard and plane sand, clay or rock sea bottoms. In a second section a more rational calculation model is described for the sea bed soil reaction forces on the sea bottom...

  10. Moving Sustainable Shipping Forward

    NARCIS (Netherlands)

    Leeuwen, van J.; Koppen, van C.S.A.

    2016-01-01

    The International Maritime Organization (IMO) is considering adopting marketbased mechanisms (MBMs) to reduce fuel consumption by commercial shipping. This paper explores the potential effectiveness of these MBMs. How companies respond to economic stimuli generated by MBMs depends on the kind of env

  11. Littoral Combat Ship (LCS)

    Science.gov (United States)

    2015-12-01

    Defense Switched Network EMD - Engineering and Manufacturing Development EVM - Earned Value Management FOC - Full Operational Capability FMS - Foreign...responses to small boat threats, mine laying and quiet diesel submarines. LCS employment of networked sensors for Intelligence, Surveillance, and...Flight 0 ships in addition to the program development, test and evaluation, training development, and sustained engineering for both LCS and Frigate

  12. SHIPPING OF RADIOACTIVE ITEMS

    CERN Multimedia

    TIS/RP Group

    2001-01-01

    The TIS-RP group informs users that shipping of small radioactive items is normally guaranteed within 24 hours from the time the material is handed in at the TIS-RP service. This time is imposed by the necessary procedures (identification of the radionuclides, determination of dose rate and massive objects require a longer procedure and will therefore take longer.

  13. Moving Sustainable Shipping Forward

    NARCIS (Netherlands)

    Leeuwen, van J.; Koppen, van C.S.A.

    2016-01-01

    The International Maritime Organization (IMO) is considering adopting marketbased mechanisms (MBMs) to reduce fuel consumption by commercial shipping. This paper explores the potential effectiveness of these MBMs. How companies respond to economic stimuli generated by MBMs depends on the kind of

  14. Reliability analysis of the bulk cargo loading system including dependent components

    Science.gov (United States)

    Blokus-Roszkowska, Agnieszka

    2016-06-01

    In the paper an innovative approach to the reliability analysis of multistate series-parallel systems assuming their components' dependency is presented. The reliability function of a multistate series system with components dependent according to the local load sharing rule is determined. Linking these results for series systems with results for parallel systems with independent components, we obtain the reliability function of a multistate series-parallel system assuming dependence of components' departures from the reliability states subsets in series subsystem and assuming independence between these subsystems. As a particular case, the reliability function of a multistate series-parallel system composed of dependent components having exponential reliability functions is fixed. Theoretical results are applied practically to the reliability evaluation of a bulk cargo transportation system, which main area is to load bulk cargo on board the ships. The reliability function and other reliability characteristics of the loading system are determined in case its components have exponential reliability functions with interdependent departures rates from the subsets of their reliability states. Finally, the obtained results are compared with results for the bulk cargo transportation system composed of independent components.

  15. 33 CFR 157.23 - Cargo and ballast system information.

    Science.gov (United States)

    2010-07-01

    ... CARRYING OIL IN BULK Design, Equipment, and Installation § 157.23 Cargo and ballast system information. (a... automatic and manual operation of the cargo and ballast system in the vessel. (b) The format and information... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Cargo and ballast system...

  16. 49 CFR 176.39 - Inspection of cargo.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Inspection of cargo. 176.39 Section 176.39... Requirements § 176.39 Inspection of cargo. (a) Manned vessels. The carrier, its agents, and any person... thereafter, weather permitting, in order to ensure that the cargo is in a safe condition and that no...

  17. 19 CFR 4.36 - Delayed discharge of cargo.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Delayed discharge of cargo. 4.36 Section 4.36... TREASURY VESSELS IN FOREIGN AND DOMESTIC TRADES Landing and Delivery of Cargo § 4.36 Delayed discharge of cargo. (a) When pursuant to section 457, Tariff Act of 1930, customs officers are placed on a...

  18. The Northern Sea Routes and Korea's Trade with Europe: Implications for Korea's Shipping Industry

    Directory of Open Access Journals (Sweden)

    Yeong-Seok Ha

    2014-12-01

    Full Text Available Melting Arctic waters have brought about global opportunities and challenges. One distinctive opportunity presented by the increasingly ice-free Arctic Ocean is its availability for shipping cargos between Europe and Asia. In adopting highly simplified assumptions of the Northern Sea Route (NSR being navigable and economical enough for shipping and NSR completely substituting for the incumbent Suez Canal route, this paper analyzes the maximum number of voyages possible for the transshipment of container cargo throughput for Korea's trade with Europe, particularly with Europe-17 and Europe-7. Our analysis shows the number of voyages range from over 2,900 to as little as 237 for Europe-17, depending on vessel sizes, when NSR is available for the whole year. With NSR opening for three months, the corresponding figures vary between 727 and 60 for Europe-17, and the figures for Europe-7 are between 2,725 and 222 and 682 and 56 voyages, respectively.

  19. Hedging the financial risk from water scarcity for Great Lakes shipping

    Science.gov (United States)

    Meyer, Eliot S.; Characklis, Gregory W.; Brown, Casey; Moody, Paul

    2016-01-01

    Low water levels in the Great Lakes have recently had significant financial impacts on the region's commercial shipping, which transports hundreds of millions of dollars' worth of bulk goods each year. Cargo capacity is a function of a ship's draft, the distance between water level and the ship's bottom, and lower water levels force ships to reduce cargo loads to prevent running aground in shallow harbors and locks. Financial risk transfer instruments, such as index-based insurance contracts, may provide an adaptable method for managing these financial risks. In this work, a relationship between water levels and shipping revenues is developed and used in an actuarial analysis of the frequency and magnitude of revenue losses. This analysis is used to develop a standardized suite of binary financial contracts, which are indexed to water levels and priced according to predefined thresholds. These contracts are then combined to form hedging portfolios with different objectives for the shippers. Results suggest that binary contracts could substantially reduce the risk of financial losses during low lake level periods and at a relatively low cost of only one to three percent of total revenues, depending on coverage level.

  20. Ship Infrared Detection/Vulnerability

    NARCIS (Netherlands)

    Jong, A.N. de

    1993-01-01

    The IR contrast of ships at sea is of importance for those who want to detect or identify the ship and for those who worry about this. This IR contrast is determined by a large number of parameters. Of course temperatures of the ship's structure and those of the ambient sea and air are important, bu

  1. The US Cruise Ship Industry.

    Science.gov (United States)

    Miller, Willis H.

    1985-01-01

    The cruise ship industry relates directly to many features of the natural and cultural environments. The U.S. cruise ship industry is analyzed. Discusses the size of the industry, precruise passenger liners, current cruise ships, cruise regions and routes, ports of call, major ports, passengers, and future prospects. (RM)

  2. 8 CFR 252.5 - Special procedures for deserters from Spanish or Greek ships of war.

    Science.gov (United States)

    2010-01-01

    ... Spanish or Greek ships of war. 252.5 Section 252.5 Aliens and Nationality DEPARTMENT OF HOMELAND SECURITY... Greek ships of war. (a) General. Under E.O. 11267 of January 19, 1966 (31 FR 807) and 28 CFR 0.109, and... a ship of war of that government, while in any port of the United States, and on proof by...

  3. Feasibility and Design Implications of Fuel Cell Power for Sealift Ships

    Science.gov (United States)

    2010-01-01

    fuel cell ( SOFC ) module is proposed and the implications of the technology on fuel savings and...implementing fuel cells as the primary power source on a large military cargo ship. A notional solid oxide fuel cell ( SOFC ) module is proposed and...suitability. 4 3. Proposed Notional Fuel Cell Power Plants for LMSR In this section, a notional hybrid SOFC – gas turbine (GT) power plant

  4. Towards Real Time Simulation of Ship-Ship Interaction

    DEFF Research Database (Denmark)

    Lindberg, Ole; Bingham, Harry B.; Engsig-Karup, Allan Peter

    2012-01-01

    We present recent and preliminary work directed towards the development of a simplified, physics-based model for improved simulation of ship-ship interaction that can be used for both analysis and real-time computing (i.e. with real-time constraints due to visualization). The goal is to implement...... the model into a large maritime simulator for training of naval officers, in particular tug boat helmsmen. Tug boat simulators are used for training of communication and situation awareness during manoeuvre involved with towing of large vessels. A main objective of the work is to improve and enable more...... accurate (realistic) and much faster ship-wave and ship-ship simulations than are currently possible. The coupling of simulation with visualization should improve the visual experience such that it can be perceived as more realistic in training. Today the state-of-art in real-time ship-ship interaction...

  5. Update on emissions and environmental impacts from the international fleet of ships. The contribution from major ship types and ports

    Science.gov (United States)

    Dalsøren, S. B.; Eide, M. S.; Endresen, Ø.; Mjelde, A.; Gravir, G.; Isaksen, I. S. A.

    2008-10-01

    globally. In certain coastal regions the contributions may be in the range 15 50%. In general we find that ship emissions have a large impact on acidic deposition and surface ozone in western North America, Scandinavia, western Europe, western North Africa and Malaysia/Indonesia. For most of these regions container traffic, the largest emitter by ship type, has the largest impact. This is the case especially for the Pacific and the related container trade routes between Asia and North America. However, the contributions from bulk ships and tank vessels are also significant in the above mentioned impact regions. Though the total ship impact at low latitudes is lower, the tank vessels have a quite large contribution at low latitudes and near the Gulf of Mexico and Middle East. The bulk ships are characterized by large impact in Oceania compared to other ship types. In Scandinavia and north-western Europe, one of the major ship impact regions, the three largest ship types have rather small relative contributions. The impact in this region is probably dominated by smaller ships operating closer to the coast. For emissions in ports impacts on NO2 and SO2 seem to be of significance. For most ports the contribution to the two components is in the range 0.5 5%, for a few ports it exceeds 10%. The approach presented provides an improvement in characterizing fleet operational patterns, and thereby ship emissions and impacts. Furthermore, the study shows where emission reductions can be applied to most effectively minimize the impacts by different ship types.

  6. Update on emissions and environmental impacts from the international fleet of ships: the contribution from major ship types and ports

    Science.gov (United States)

    Dalsøren, S. B.; Eide, M. S.; Endresen, Ø.; Mjelde, A.; Gravir, G.; Isaksen, I. S. A.

    2009-03-01

    globally. In certain coastal regions the contributions may be in the range 15-50%. In general we find that ship emissions have a large impact on acidic deposition and surface ozone in Western North America, Scandinavia, Western Europe, western North Africa and Malaysia/Indonesia. For most of these regions container traffic, the largest emitter by ship type, has the largest impact. This is the case especially for the Pacific and the related container trade routes between Asia and North America. However, the contributions from bulk ships and tank vessels are also significant in the above mentioned impact regions. Though the total ship impact at low latitudes is lower, the tank vessels have a quite large contribution at low latitudes and near the Gulf of Mexico and Middle East. The bulk ships are characterized by large impact in Oceania compared to other ship types. In Scandinavia and north-Western Europe, one of the major ship impact regions, the three largest ship types have rather small relative contributions. The impact in this region is probably dominated by smaller ships operating closer to the coast. For emissions in ports impacts on NO2 and SO2 seem to be of significance. For most ports the contribution to the two components is in the range 0.5-5%, for a few ports it exceeds 10%. The approach presented provides an improvement in characterizing fleet operational patterns, and thereby ship emissions and impacts. Furthermore, the study shows where emission reductions can be applied to most effectively minimize the impacts by different ship types.

  7. Update on emissions and environmental impacts from the international fleet of ships: the contribution from major ship types and ports

    Directory of Open Access Journals (Sweden)

    S. B. Dalsøren

    2009-03-01

    regard to acidification we find that ships contribute 11% to nitrate wet deposition and 4.5% to sulphur wet deposition globally. In certain coastal regions the contributions may be in the range 15–50%.

    In general we find that ship emissions have a large impact on acidic deposition and surface ozone in Western North America, Scandinavia, Western Europe, western North Africa and Malaysia/Indonesia. For most of these regions container traffic, the largest emitter by ship type, has the largest impact. This is the case especially for the Pacific and the related container trade routes between Asia and North America. However, the contributions from bulk ships and tank vessels are also significant in the above mentioned impact regions. Though the total ship impact at low latitudes is lower, the tank vessels have a quite large contribution at low latitudes and near the Gulf of Mexico and Middle East. The bulk ships are characterized by large impact in Oceania compared to other ship types. In Scandinavia and north-Western Europe, one of the major ship impact regions, the three largest ship types have rather small relative contributions. The impact in this region is probably dominated by smaller ships operating closer to the coast. For emissions in ports impacts on NO2 and SO2 seem to be of significance. For most ports the contribution to the two components is in the range 0.5–5%, for a few ports it exceeds 10%.

    The approach presented provides an improvement in characterizing fleet operational patterns, and thereby ship emissions and impacts. Furthermore, the study shows where emission reductions can be applied to most effectively minimize the impacts by different ship types.

  8. Update on emissions and environmental impacts from the international fleet of ships. The contribution from major ship types and ports

    Directory of Open Access Journals (Sweden)

    S. B. Dalsøren

    2008-10-01

    regard to acidification we find that ships contribute 11% to nitrate wet deposition and 4.5% to sulphur wet deposition globally. In certain coastal regions the contributions may be in the range 15–50%.

    In general we find that ship emissions have a large impact on acidic deposition and surface ozone in western North America, Scandinavia, western Europe, western North Africa and Malaysia/Indonesia. For most of these regions container traffic, the largest emitter by ship type, has the largest impact. This is the case especially for the Pacific and the related container trade routes between Asia and North America. However, the contributions from bulk ships and tank vessels are also significant in the above mentioned impact regions. Though the total ship impact at low latitudes is lower, the tank vessels have a quite large contribution at low latitudes and near the Gulf of Mexico and Middle East. The bulk ships are characterized by large impact in Oceania compared to other ship types. In Scandinavia and north-western Europe, one of the major ship impact regions, the three largest ship types have rather small relative contributions. The impact in this region is probably dominated by smaller ships operating closer to the coast. For emissions in ports impacts on NO2 and SO2 seem to be of significance. For most ports the contribution to the two components is in the range 0.5–5%, for a few ports it exceeds 10%.

    The approach presented provides an improvement in characterizing fleet operational patterns, and thereby ship emissions and impacts. Furthermore, the study shows where emission reductions can be applied to most effectively minimize the impacts by different ship types.

  9. Discharging Part of LNG Liquid Cargo Handling Simulator

    Directory of Open Access Journals (Sweden)

    Zhen-Zhou Yang

    2013-09-01

    Full Text Available With the development of the national economy, it is important to develop LNG (Liquefied Natural Gas liquid cargo handling simulator. In this paper, the discharging part of Liquid Cargo Handling Simulator of LNG Carriers is developed by Visual Basic. The system includes 5 major forms and 3 mathematical models such as cargo pump model, the pressure and temperature model of the LNG vapour in the cargo tank and the liquid level model. The system can complete the unloading task. The system has become a preliminary model of LNG liquid cargo handlings simulator training.

  10. Aviation System Analysis Capability Air Carrier Investment Model-Cargo

    Science.gov (United States)

    Johnson, Jesse; Santmire, Tara

    1999-01-01

    The purpose of the Aviation System Analysis Capability (ASAC) Air Cargo Investment Model-Cargo (ACIMC), is to examine the economic effects of technology investment on the air cargo market, particularly the market for new cargo aircraft. To do so, we have built an econometrically based model designed to operate like the ACIM. Two main drivers account for virtually all of the demand: the growth rate of the Gross Domestic Product (GDP) and changes in the fare yield (which is a proxy of the price charged or fare). These differences arise from a combination of the nature of air cargo demand and the peculiarities of the air cargo market. The net effect of these two factors are that sales of new cargo aircraft are much less sensitive to either increases in GDP or changes in the costs of labor, capital, fuel, materials, and energy associated with the production of new cargo aircraft than the sales of new passenger aircraft. This in conjunction with the relatively small size of the cargo aircraft market means technology improvements to the cargo aircraft will do relatively very little to spur increased sales of new cargo aircraft.

  11. 舰船总布置方案的直觉模糊多属性群决策模型%Intuitionistic fuzzy multiple attribute group decision making model for general arrangement of a ship

    Institute of Scientific and Technical Information of China (English)

    胡玉龙; 黄胜; 侯远杭; 王文全; 郭春雨

    2012-01-01

    In order to attain consistency during the decision-making process of a general arrangement scheme of a naval ship, repetitive negotiation and compromise among experts is always needed. An evaluation system of general arrange-, ment was presented from the perspective of facilitating for combat and use of warships. To overcome the massive amount of negotiation and compromise among experts in the decision-making process, an intuitionistic fuzzy multiple attribute group decision making model based on an adaptive consensus algorithm was proposed to repeatedly update the decision-making information of experts based on group decision making information, achieving an acceptable consensus between experts. The algorithm avoided repeatedly collecting the decision-making array by each expert, allowing it to boost the efficiency of the decision-making process. It can also be applied to areas in complex industrial design.%在舰船总布置方案决策问题中,为了得到总体一致的结论,往往需要专家经过反复的协商和妥协来实现,从有利于舰船作战使用的角度,提出了总布置方案评价的指标体系.为了克服决策过程中需要通过来自不同专业领域的专家反复协商来使专家决策信息达到可接受的一致性不仅耗时且可操作性差的问题,引入了基于自适应一致性算法的直觉模糊多属性群决策模型对设计方案进行优选评价.算法在参考群决策信息的基础上,对专家决策信息进行反复修正,使专家之间的决策信息达到可接受的一致性.算法较好地模拟了专家之间真实的谈判和妥协的决策过程,不需要专家对决策矩阵进行反复的修正,提高了决策的效率,为复杂工业设计方案决策提供了参考.

  12. Cargo adaptors: structures illuminate mechanisms regulating vesicle biogenesis.

    Science.gov (United States)

    Paczkowski, Jon E; Richardson, Brian C; Fromme, J Christopher

    2015-07-01

    Cargo adaptors sort transmembrane protein cargos into nascent vesicles by binding directly to their cytosolic domains. Recent studies have revealed previously unappreciated roles for cargo adaptors and regulatory mechanisms governing their function. The adaptor protein (AP)-1 and AP-2 clathrin adaptors switch between open and closed conformations that ensure they function at the right place at the right time. The exomer cargo adaptor has a direct role in remodeling the membrane for vesicle fission. Several different cargo adaptors functioning in distinct trafficking pathways at the Golgi are similarly regulated through bivalent binding to the ADP-ribosylation factor 1 (Arf1) GTPase, potentially enabling regulation by a threshold concentration of Arf1. Taken together, these studies highlight that cargo adaptors do more than just adapt cargos.

  13. EMP coupling to ships

    Energy Technology Data Exchange (ETDEWEB)

    Deadrick, F.J.; Cabayan, H.S.; Kunz, K.F.; Bevensee, R.M.; Martin, L.C.; Egbert, R.W.

    1980-01-01

    Scale-model tests were conducted to establish the adequacy and limitations of model measurements as tools for predicting electromagnetic pulse (EMP) coupling voltages and currents to the critical antennas, cables, and metallic structures on ships. The scale-model predictions are compared with the results of the full-scale EMP simulation test of the Canadian ASW ship, HMCS Huron. (The EMP coupling predictions in this report were made without prior knowledge of the results of the data from the HMCS Huron tests.) This report establishes that the scale-model tests in conjunction with the data base from EMP coupling modules provides the necessary information for source model development and permits effective, low-cost study of particular system configurations. 184 figures, 9 tables.

  14. Hydrodynamics of Ship Propellers

    DEFF Research Database (Denmark)

    Breslin, John P.; Andersen, Poul

    This book deals with flows over propellers operating behind ships, and the hydrodynamic forces and moments which the propeller generates on the shaft and on the ship hull.The first part of the text is devoted to fundamentals of the flow about hydrofoil sections (with and without cavitation......) and about wings. It then treats propellers in uniform flow, first via advanced actuator disc modelling, and then using lifting-line theory. Pragmatic guidance is given for design and evaluation of performance, including the use of computer modelling.The second part covers the development of unsteady forces...... arising from operation in non-uniform hull wakes. First, by a number of simplifications, various aspects of the problem are dealt with separately until the full problem of a non-cavitating, wide-bladed propeller in a wake is treated by a new and completely developed theory. Next, the complicated problem...

  15. Mechanics of Ship Grounding

    DEFF Research Database (Denmark)

    Pedersen, Preben Terndrup

    1996-01-01

    In these notes first a simplified mathematical model is presented for analysis of ship hull loading due to grounding on relatively hard and plane sand, clay or rock sea bottoms. In a second section a more rational calculation model is described for the sea bed soil reaction forces on the sea bottom....... Finally, overall hull failure is considered first applying a quasistatic analysis model and thereafter a full dynamic model....

  16. Shipping lines and logistics

    OpenAIRE

    FREMONT, A

    2006-01-01

    For some time it has been acknowledged that logistics is a driving force that shapes the integration of the transport chain. This paper argues that while the liner shipping industry exhibits increased horizontal integration, its vertical integration remains limited. A clear distinction is drawn between freight logistics, container logistics and vessel logistics. Freight logistics is defined as part of the supply chain process, the focus of which are the goods being transported. The purpose of...

  17. Global Shipping Game

    Science.gov (United States)

    2011-01-28

    CDR Ed Suraci, and Mr. Leif Bergey . Cell Support: Each cell had an assigned data collection support assistant. These personnel assisted the players...Mr. Leif Bergey (Control Cell). Ethnographers (Environmental Recorders): Employed a variety of quasi-anthropological, ethnographic techniques to...for this project was Mr. Leif Bergey . Global Shipping Game Report 20 7 / 14 7 / 5 19 / 8 3 / 10 III. ANALYSIS

  18. SHIPPING OF RADIOACTIVE ITEMS

    CERN Multimedia

    TIS/RP Group

    2001-01-01

    The TIS-RP group informs users that shipping of small radioactive items is normally guaranteed within 24 hours from the time the material is handed in at the TIS-RP service. This time is imposed by the necessary procedures (identification of the radionuclides, determination of dose rate, preparation of the package and related paperwork). Large and massive objects require a longer procedure and will therefore take longer.

  19. Transformable Heavy Lift Ship

    Science.gov (United States)

    2007-08-01

    the 500 group include climate control, freshwater/seawater systems, mechanical handling, and special purpose systems. Due to the large troop...compliment carried on the JHSS, large amounts of climate control and ventilation were required. The transformable heavy lift ship has only a single... Treeline Connector Innovation Cell Naval Research Enterprise Intern Program Final Report, NSWCCD-20-TR-2005/05 August 2005 "Saturn." Nijhuis

  20. The right whale mandatory ship reporting system: a retrospective.

    Science.gov (United States)

    Silber, Gregory K; Adams, Jeffrey D; Asaro, Michael J; Cole, Timothy V N; Moore, Katie S; Ward-Geiger, Leslie I; Zoodsma, Barbara J

    2015-01-01

    In 1998, the United States sought and received International Maritime Organization-endorsement of two Mandatory Ship Reporting (MSR) systems designed to improve mariner awareness about averting ship collisions with the endangered North Atlantic right whale (Eubalaena glacialis). Vessel collisions are a serious threat to the right whale and the program was among the first formal attempts to reduce this threat. Under the provisions of the MSR, all ships >300 gross tons are required to report their location, speed, and destination to a shore-based station when entering two key right whale habitats: one in waters off New England and one off coastal Georgia and Florida. In return, reporting ships receive an automatically-generated message, delivered directly to the ship's bridge, that provides information about right whale vulnerability to vessel collisions and actions mariners can take to avoid collisions. The MSR has been in operation continuously from July 1999 to the present. Archived incoming reports provided a 15-plus year history of ship operations in these two locations. We analyzed a total of 26,772 incoming MSR messages logged between July 1999 and December 2013. Most ships that were required to report did so, and compliance rates were generally constant throughout the study period. Self-reported vessel speeds when entering the systems indicated that most ships travelled between 10 and 16 (range = 5-20 +) knots. Ship speeds generally decreased in 2009 to 2013 following implementation of vessel speed restrictions. The number of reports into the southern system remained relatively constant following a steady increase through 2007, but numbers in the northern system decreased annually beginning in 2008. If reporting is indicative of long-term patterns in shipping operations, it reflects noteworthy changes in marine transportation. Observed declines in ship traffic are likely attributable to the 2008-2009 economic recession, the containerized shipping industry

  1. RELATIONS OF DISTRIBUTION OF THE LOW SULPHUR SHIPPING FUELS IN REGION OF THE BALTIC SEA IN THE BUNKERING BOAT-SHIP SUPPLY

    Directory of Open Access Journals (Sweden)

    Mariusz Matejski

    2012-12-01

    Full Text Available The article presents relations of distribution of the low sulphur marine fuels as result of being in force the International Convention for the Prevention of Pollution from Ships (MARPOL 73/78, especially the record establishing the region of the Baltic Sea and the North See as sulphur emission control areas (SECA. There are presented obligatory regulations and their influence on sale of the particular kinds of fuels in this region. There are also presented chosen procedures of care about cargo in relation bunker boat – harbour – ship, the delivery fuel procedures in relation bunker boat–ship and the quantitative analysis of distributed fuels on an example of chosen bunker boat.

  2. Cargo transportation by two species of motor protein.

    Science.gov (United States)

    Zhang, Yunxin

    2013-05-01

    The cargo motion in living cells transported by two species of motor protein with different intrinsic directionalities is discussed in this study. Similarly to single motor movement, the cargo steps forward and backward along a microtubule stochastically. Recent experiments found that cargo transportation by two motor species has a memory; it does not change its direction as frequently as expected, which means that its forward and backward step rates depend on its previous motion trajectory. By assuming that the cargo has only the least possible memory, i.e., its step direction depends only on the direction of its last step, two cases of cargo motion are analyzed in detail in this study: (I) cargo motion under constant external load, and (II) cargo motion in one fixed optical trap. Due to the existence of memory, in the first case, the cargo can keep moving in the same direction for a long distance. In the second case, the cargo will oscillate in the trap. The oscillation period decreases and the oscillation amplitude increases with increasing forward step rate of the motor, but both of them decrease with increasing trap stiffness. The most likely location of the cargo, where the probability of finding the oscillating cargo is maximum, may be the same as or may be different from the trap center, which depends on the step rates of the two motor species. Meanwhile, if the motors are robust, i.e., their forward to backward step rate ratios are high, there may be two such most likely locations, located one on each side of the trap center. The probability of finding the cargo in a given location, the probability of the cargo being in forward or backward motion, and various mean first passage times of the cargo to a given location or a given state are also analyzed.

  3. Exergy Analysis of Complex Ship Energy Systems

    Directory of Open Access Journals (Sweden)

    Pierre Marty

    2016-04-01

    Full Text Available With multiple primary and secondary energy converters (diesel engines, steam turbines, waste heat recovery (WHR and oil-fired boilers, etc. and extensive energy networks (steam, cooling water, exhaust gases, etc., ships may be considered as complex energy systems. Understanding and optimizing such systems requires advanced holistic energy modeling. This modeling can be done in two ways: The simpler approach focuses on energy flows, and has already been tested, approved and presented; a new, more complicated approach, focusing on energy quality, i.e., exergy, is presented in this paper. Exergy analysis has rarely been applied to ships, and, as a general rule, the shipping industry is not familiar with this tool. This paper tries to fill this gap. We start by giving a short reminder of what exergy is and describe the principles of exergy modeling to explain what kind of results should be expected from such an analysis. We then apply these principles to the analysis of a large two-stroke diesel engine with its cooling and exhaust systems. Simulation results are then presented along with the exergy analysis. Finally, we propose solutions for energy and exergy saving which could be applied to marine engines and ships in general.

  4. Sloshing Simulation of Three Types Tank Ship on Pitching and Heaving Motion

    Directory of Open Access Journals (Sweden)

    Edi Djatmiko

    2017-06-01

    Full Text Available As an important part of a ship, tanker / cargo hold specifically designed to distribute the load to be maintained safely. In a related IMO classification of LNG carrier, there are a wide variety of types of LNG tanks on ships. Are generally divided into two types, namely tank (Independent Self Supporting Tank and (Non Self Supporting Tanks. The tank-type variation will affect the characteristics of fluid motion that is inside the tank. Need for simulation of sloshing and analysis of the structure of the tank due to the force created by the load when the heaving and pitching. Sloshing the effect of the free movement of the fluid in the tank with the striking motion wall tank walls that can damage the walls of the tank. Type 1 tank is a tank octagonal (octogonal for membrane-type LNG carrier with dimensions of length 38 m width 39.17 m 14.5 m high side of the tank. Type 2 tank is a tank-shaped capsule with the long dimension of 26.6 m and a diameter of 10.5 m. Type 3 tank is rectangular tank (rectanguler with dimensions of length of 49.68 m, width 46.92 and 32.23 m high. Simulations conducted using Computational Fluid Dynamic (CFD using ANSYS FLUENT software. From the simulation results concluded that the tank 1 to form (octogonal have a total pressure of 3013.99 Pa on the front wall with a height of 13.65 m from the base of the tank

  5. Evaluation difference between mass of received cargo and mass of handed over the cargo in the determination of the masses by draft survey

    Directory of Open Access Journals (Sweden)

    Yakuta I. V.

    2016-12-01

    Full Text Available The paper provides the analysis of problems associated with the evaluation of difference between the mass of received and handed over cargo in determining the masses by draft survey and due to the difference in the measurement conditions at the loading and unloading ports (due to the change errors in various stages of the measurement procedures. The errors that may arise in determining the mass of the cargo due to roughness when measuring draft, due to using the inclinometer to determine the draft from one of boards, due to instrumental errors in the determination of the density of seawater, due to other possible errors have been investigated and evaluated. To estimate the errors of draft due to heaving and errors of inclinometer some formula are to be applied, their derivation has been done in this paper. It has been recommended to use the traditional formula of high-speed drawdown with the replacement of vessel speed on current rate to calculate the error of precipitation arising from the drawdowns ship on a current. The value per unit displacement draft from loading scale has been used to evaluate the error of the displacement appearing in the presence of draft errors. As a result two similar criteria (rigorous and statistical of allowable discrepancies calculated by draft survey mass of cargo in the port of loading and port of discharge have been substantiated. These criteria require the calculation and accumulation in a table of all the errors and calculate the total error of displacement. Criteria will allow the consignee and the carrier come to a reasonable and agreed decision about the significance of differences of the masses taking into account the indifference of conditions and measuring instruments.

  6. Numerical and experimental investigation of the resistance performance of an icebreaking cargo vessel in pack ice conditions

    Directory of Open Access Journals (Sweden)

    Moon-Chan Kim

    2013-03-01

    Full Text Available The resistance performance of an icebreaking cargo vessel in pack ice conditions was investigated numerically and experimentally using a recently developed finite element (FE model and model tests. A comparison between numerical analysis and experimental results with synthetic ice in a standard towing tank was carried out. The comparison extended to results with refrigerated ice to examine the feasibility of using synthetic ice. Two experiments using two different ice materials gave a reasonable agreement. Ship-ice interaction loads are numerically calculated based on the fluid structure interaction (FSI method using the commercial FE package LS-DYNA. Test results from model testing with synthetic ice at the Pusan National University towing tank, and with refrigerated ice at the National Research Council's (NRC ice tank, are used to validate and benchmark the numerical simulations. The designed ice-going cargo vessel is used as a target ship for three concentrations (90%, 80%, and 60% of pack ice conditions. Ice was modeled as a rigid body but the ice density was the same as that in the experiments. The numerical challenge is to evaluate hydrodynamic loads on the ship's hull; this is difficult because LS-DYNA is an explicit FE solver and the FSI value is calculated using a penalty method. Comparisons between numerical and experimental results are shown, and our main conclusions are given.

  7. Intentional cargo disruption by nefarious means: Examining threats, systemic vulnerabilities and securitisation measures in complex global supply chains.

    Science.gov (United States)

    McGreevy, Conor; Harrop, Wayne

    2015-01-01

    Global trade and commerce requires products to be securely contained and transferred in a timely way across great distances and between national boundaries. Throughout the process, cargo and containers are stored, handled and checked by a range of authorities and authorised agents. Intermodal transportation involves the use of container ships, planes, railway systems, land bridges, road networks and barges. This paper examines the the nefarious nature of intentional disruption and nefarious risks associated with the movement of cargo and container freight. The paper explores main threats, vulnerabilities and security measures relevant to significant intermodal transit risk issues such as theft, piracy, terrorism, contamination, counterfeiting and product tampering. Three risk and vulnerability models are examined and basic standards and regulations that are relevant to safe and secure transit of container goods across international supply networks are outlined.

  8. Basic mechanisms for recognition and transport of synaptic cargos

    Directory of Open Access Journals (Sweden)

    Schlager Max A

    2009-08-01

    Full Text Available Abstract Synaptic cargo trafficking is essential for synapse formation, function and plasticity. In order to transport synaptic cargo, such as synaptic vesicle precursors, mitochondria, neurotransmitter receptors and signaling proteins to their site of action, neurons make use of molecular motor proteins. These motors operate on the microtubule and actin cytoskeleton and are highly regulated so that different cargos can be transported to distinct synaptic specializations at both pre- and post-synaptic sites. How synaptic cargos achieve specificity, directionality and timing of transport is a developing area of investigation. Recent studies demonstrate that the docking of motors to their cargos is a key control point. Moreover, precise spatial and temporal regulation of motor-cargo interactions is important for transport specificity and cargo recruitment. Local signaling pathways – Ca2+ influx, CaMKII signaling and Rab GTPase activity – regulate motor activity and cargo release at synaptic locations. We discuss here how different motors recognize their synaptic cargo and how motor-cargo interactions are regulated by neuronal activity.

  9. A Model of Ship Auxiliary System for Reliable Ship Propulsion

    OpenAIRE

    Dragan Martinović; Mato Tudor; Dean Bernečić

    2012-01-01

    The main purpose of a vessel is to transport goods and passengers at minimum cost. Out of the analysis of relevant global databases on ship machinery failures, it is obvious that the most frequent failures occur precisely on the generator-running diesel engines. Any failure in the electrical system can leave the ship without propulsion, even if the main engine is working properly. In that case, the consequences could be devastating: higher running expenses, damage to the ship, oil spill or su...

  10. The right whale mandatory ship reporting system: a retrospective

    Directory of Open Access Journals (Sweden)

    Gregory K. Silber

    2015-03-01

    Full Text Available In 1998, the United States sought and received International Maritime Organization-endorsement of two Mandatory Ship Reporting (MSR systems designed to improve mariner awareness about averting ship collisions with the endangered North Atlantic right whale (Eubalaena glacialis. Vessel collisions are a serious threat to the right whale and the program was among the first formal attempts to reduce this threat. Under the provisions of the MSR, all ships >300 gross tons are required to report their location, speed, and destination to a shore-based station when entering two key right whale habitats: one in waters off New England and one off coastal Georgia and Florida. In return, reporting ships receive an automatically-generated message, delivered directly to the ship’s bridge, that provides information about right whale vulnerability to vessel collisions and actions mariners can take to avoid collisions. The MSR has been in operation continuously from July 1999 to the present. Archived incoming reports provided a 15-plus year history of ship operations in these two locations. We analyzed a total of 26,772 incoming MSR messages logged between July 1999 and December 2013. Most ships that were required to report did so, and compliance rates were generally constant throughout the study period. Self-reported vessel speeds when entering the systems indicated that most ships travelled between 10 and 16 (range = 5–20 + knots. Ship speeds generally decreased in 2009 to 2013 following implementation of vessel speed restrictions. The number of reports into the southern system remained relatively constant following a steady increase through 2007, but numbers in the northern system decreased annually beginning in 2008. If reporting is indicative of long-term patterns in shipping operations, it reflects noteworthy changes in marine transportation. Observed declines in ship traffic are likely attributable to the 2008–2009 economic recession, the

  11. Ship Roll Motion Control

    DEFF Research Database (Denmark)

    Perez, Tristan; Blanke, Mogens

    2010-01-01

    The technical feasibility of roll motion control devices has been amply demonstrated for over 100 years. Performance, however, can still fall short of expectations because of deciencies in control system designs, which have proven to be far from trivial due to fundamental performance limitations....... This tutorial paper presents an account of the development of various ship roll motion control systems and the challenges associated with their design. The paper discusses how to assess performance, the applicability of dierent models, and control methods that have been applied in the past....

  12. Operational Options for Green Ships

    Institute of Scientific and Technical Information of China (English)

    Salma Sherbaz; Wenyang Duan

    2012-01-01

    Environmental issues and rising fuel prices necessitate better energy-efficiency in all sectors.The shipping industry is one of the major stakeholders,responsible for 3% of global CO2 emissions,14%-15% of global NOx emissions,and 16% of global SOx emissions.In addition,continuously rising fuel prices are also an incentive to focus on new ways for better energy-effectiveness.The green ship concept requires exploring and implementing technology on ships to increase energy-efficiency and reduce emissions.Ship operation is an important topic with large potential to increase cost-and-energy-effectiveness.This paper provided a comprehensive review of basic concepts,principles,and potential of operational options for green ships.The key challenges pertaining to ship crew i.e.academic qualifications prior to induction,in-service training and motivation were discussed.The author also deliberated on remedies to these challenges.

  13. Operational options for green ships

    Science.gov (United States)

    Sherbaz, Salma; Duan, Wenyang

    2012-09-01

    Environmental issues and rising fuel prices necessitate better energy-efficiency in all sectors. The shipping industry is one of the major stakeholders, responsible for 3% of global CO2 emissions, 14%-15% of global NO X emissions, and 16% of global SO X emissions. In addition, continuously rising fuel prices are also an incentive to focus on new ways for better energy-effectiveness. The green ship concept requires exploring and implementing technology on ships to increase energy-efficiency and reduce emissions. Ship operation is an important topic with large potential to increase cost-and-energy-effectiveness. This paper provided a comprehensive review of basic concepts, principles, and potential of operational options for green ships. The key challenges pertaining to ship crew i.e. academic qualifications prior to induction, in-service training and motivation were discussed. The author also deliberated on remedies to these challenges.

  14. A New Propulsion System for Ships.

    Science.gov (United States)

    1980-01-31

    complex relationships involving ship propulsion , ship control and a host of independent problems related to hydrodynamics, structural mechanics, efficiency...namely ship configuration and ship con- trol in addition to ship propulsion . The transmission pump can 1be used for boundary layer control on the...possibly overcome the limitation and performance shortcomings of existing ship propulsion systems. Light weight propulsion systems for naval ship

  15. Burn Care on Cruise Ships-Epidemiology, international regulations, risk situation, disaster management and qualification of the ship's doctor.

    Science.gov (United States)

    Ottomann, C; Hartmann, B; Antonic, V

    2016-09-01

    With the increasing numbers of passengers and crew on board vessels that are becoming larger and larger, the demand for ship's doctors who can adequately treat burns on board has also increased. In the cruise ship industry it is usually those doctor's with internal and general medical training who are recruited from an epidemiological point of view. Training content or recommendations for the treatment of thermal lesions with the limited options available in ship's hospitals and where doctors with no surgical training operate do not yet exist. The guidelines recommended by the Cruise Lines International Association (CLIA) regarding medical staff have only included physicians with minor surgical skills until now. With the introduction of the ATLS(®) course developed by the American College of Surgeons, the requirements for the qualification of the ship's doctor on board cruise ships shall change from January 2017. The article discusses the question of whether having completed the ATLS(®) course, the ship's doctor is trained to adequately treat thermal lesions or severe burns persons on-board, and presents the current discussion on the training content for ship's doctors within the International Maritime Health Association (IMHA). It also provides an overview of existing international regulatory frameworks, the risks presented by a fire on board, the problem of treating burns victims out of reach of coastal rescue services, and alternative training concepts for ship's doctors regarding the therapy of thermal lesions on-board.

  16. A new method for ship inner shell optimization based on parametric technique

    Directory of Open Access Journals (Sweden)

    Yu Yan-Yun

    2015-01-01

    Full Text Available A new method for ship Inner Shell optimization, which is called Parametric Inner Shell Optimization Method (PISOM, is presented in this paper in order to improve both hull performance and design efficiency of transport ship. The foundation of PISOM is the parametric Inner Shell Plate (ISP model, which is a fully-associative model driven by dimensions. A method to create parametric ISP model is proposed, including geometric primitives, geometric constraints, geometric constraint solving etc. The standard optimization procedure of ship ISP optimization based on parametric ISP model is put forward, and an efficient optimization approach for typical transport ship is developed based on this procedure. This approach takes the section area of ISP and the other dominant parameters as variables, while all the design requirements such as propeller immersion, fore bottom wave slap, bridge visibility, longitudinal strength etc, are made constraints. The optimization objective is maximum volume of cargo oil tanker/cargo hold, and the genetic algorithm is used to solve this optimization model. This method is applied to the optimization of a product oil tanker and a bulk carrier, and it is proved to be effective, highly efficient, and engineering practical.

  17. Future of Magnetohydrodynamic Ship Propulsion,

    Science.gov (United States)

    1983-08-16

    83 FOREIGN TECHNOLOGY DIVISION FUTURE OF MAGNETOHYDRODYNAMIC SHIP PROPULSION by A.P. Baranov DTIQ ~E tJ Approved for public release; 0.. distribution...MAGNETOHYDRODYNAMIC SHIP PROPULSION By: A.P. Baranov -,English pages: 10 Source: Sudostroyeniye, Nr. 12, December 1966, pp. 3-6 . Country of origin: USSR X...equations, etc. merged into this translation were extracted from the best quality copy available. FUTURE OF MAGNETOHYDRODYNAMIC SHIP PROPULSION A. P

  18. A mechanism for retromer endosomal coat complex assembly with cargo.

    Science.gov (United States)

    Harrison, Megan S; Hung, Chia-Sui; Liu, Ting-ting; Christiano, Romain; Walther, Tobias C; Burd, Christopher G

    2014-01-07

    Retromer is an evolutionarily conserved protein complex composed of the VPS26, VPS29, and VPS35 proteins that selects and packages cargo proteins into transport carriers that export cargo from the endosome. The mechanisms by which retromer is recruited to the endosome and captures cargo are unknown. We show that membrane recruitment of retromer is mediated by bivalent recognition of an effector of PI3K, SNX3, and the RAB7A GTPase, by the VPS35 retromer subunit. These bivalent interactions prime retromer to capture integral membrane cargo, which enhances membrane association of retromer and initiates cargo sorting. The role of RAB7A is severely impaired by a mutation, K157N, that causes Charcot-Marie-Tooth neuropathy 2B. The results elucidate minimal requirements for retromer assembly on the endosome membrane and reveal how PI3K and RAB signaling are coupled to initiate retromer-mediated cargo export.

  19. Trends in Integrated Ship Control Networking

    DEFF Research Database (Denmark)

    Jørgensen, N.; Nielsen, Jens Frederik Dalsgaard

    1997-01-01

    Integrated Ship Control systems can be designed as robust, distributed, autonomous control systems. The EU funded ATOMOS and ATOMOS II projects involves both technical and non technical aspects of this process. A reference modelling concept giving an outline of a generic ISC system covering...... the network and the equipment connected to it, a framework for verification of network functionality and performance by simulation and a general distribution platform for ISC systems, The ATOMOS Network, are results of this work....

  20. Trends in Integrated Ship Control Networking

    OpenAIRE

    Jørgensen, N.; Nielsen, Jens Frederik Dalsgaard

    1997-01-01

    Integrated Ship Control systems can be designed as robust, distributed, autonomous control systems. The EU funded ATOMOS and ATOMOS II projects involves both technical and non technical aspects of this process. A reference modelling concept giving an outline of a generic ISC system covering the network and the equipment connected to it, a framework for verification of network functionality and performance by simulation and a general distribution platform for ISC systems, The ATOMOS Network, a...

  1. ERDC Ship/Tow Simulator

    Data.gov (United States)

    Federal Laboratory Consortium — Performing Advanced Hydrodynamic ModelingEngineers and ship pilots can now overcome the challenges of evaluating navigation channel designs, modifications and safety...

  2. Application of Ship Motion Simulation in Reliability Assessment of Ship Entrance into the Port

    Directory of Open Access Journals (Sweden)

    Teresa Abramowicz-Gerigk

    2016-12-01

    Full Text Available The growing number of large container vessels is the reason of port infrastructure modernization necessity and changes of local bylaws in ports. The accessibility studies based on ship motion simulation allow for the assessment of manoeuvring operations safety for the new port designs and reconstructions of the existed infrastructure. Several factors can be used to determine safety of manoeuvring operations. The paper presents an approach to determine the operational reliability which can be included in an accessibility study to determine the best of the possible solutions with respect to the ship entrance into the harbour. The general reliability model has been proposed and an example of reliability of ship entrance into the Port of Gdynia is presented.

  3. Ship Creek bioassessment investigations

    Energy Technology Data Exchange (ETDEWEB)

    Cushing, C.E.; Mueller, R.P.; Murphy, M.T.

    1995-06-01

    Pacific Northwest Laboratory (PNL) was asked by Elmendorf Air Force Base (EAFB) personnel to conduct a series of collections of macroinvertebrates and sediments from Ship Creek to (1) establish baseline data on these populations for reference in evaluating possible impacts from Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) activities at two operable units, (2) compare current population indices with those found by previous investigations in Ship Creek, and (3) determine baseline levels of concentrations of any contaminants in the sediments associated with the macroinvertebrates. A specific suite of indices established by the US Environmental Protection Agency (EPA) was requested for the macroinvertebrate analyses; these follow the Rapid Bioassessment Protocol developed by Plafkin et al. (1989) and will be described. Sediment sample analyses included a Microtox bioassay and chemical analysis for contaminants of concern. These analyses included, volatile organic compounds, total gasoline and diesel hydrocarbons (EPA method 8015, CA modified), total organic carbon, and an inductive-coupled plasma/mass spectrometry (ICP/MS) metals scan. Appendix A reports on the sediment analyses. The Work Plan is attached as Appendix B.

  4. Defining freight rates as a contribution to the successful operation of container shipping companies

    Directory of Open Access Journals (Sweden)

    Renato Oblak

    2016-12-01

    Full Text Available The globalization of the world market and the flexibility of containerization to adjust to the constant changes in supply and demand of the international goods market, has led to a continuous increase in the portion of the container transport within the international maritime cargo transport. By the increase of the container transport level, the impact and importance of container freight rates have been growing, the variability of which directly reflects on the world economy. The aim of this paper is to analyze the efficiency of actual methods in establishing the container freight rates according to the problems which appear in the container shipping operation and refer to large differences in the weights of the actual transported cargo and the declared cargo in containers. The consequence of is lower freight rates and higher costs of the vessels exploitation, concerning the increase of the bunker oil consumption. The conducted research is based on actual data that have been collected and analyzed from particular container vessel liner services within period of 90 days and casting off from 16 container ports. The proposed measures could increase the level of usability of the transporting ships capacities and enable a more accurate and correct account of sea freight rates. The results of the research have shown that by increasing the control of accuracy of the cargo weight in containers and by improving the model of accounting, the freight rates can increase the incomes of shipping companies maintaining the same level of container traffic, which can have a direct influence on the efficiency of their successful operation.

  5. STRATEGIC MANAGEMENT OF TRANSPORT CARGO COMPLEX

    Directory of Open Access Journals (Sweden)

    A. M. Okorokov

    2014-06-01

    Full Text Available Purpose. Making the qualitative administrative decisions defining strategy and tactics of transport cargo complexes development, and also its subsystems, is possible only in the presence of flexible optimization model. This model has to consider multiparametricity and multicriteriality of the given task, uncertainty and vagueness of input information, and also to provide process automation of searching the best parameters of the given production facility. The purpose of the research is to develop procedures for the strategic management of complex with view of the most important factors and their stochastic nature, which will execute the improvement of technical equipment of TCC. Methodology. The problem of strategic management is based on solving the complex of issues of the optimal number of shunting locomotives, optimal processing capability of handling the front and rational capacity of warehouses. The problem is solved on the basis of the proposed optimality criterion – the specific set of profit per unit of capital assets of freight industry. The listed problems are solved using simulation modeling of the freight industry. Findings. The use of developed procedure allows one to improve the technical equipment of the freight stations and complexes. Originality. For the first time it was developed the procedure of strategic management of development. This procedure allows taking into account the probabilistic nature of demand for services of transport freight complexes and technological processes of client services on the complex stations. The proposed procedure can be applied during when planning the investments in the creation of transport freight complexes. Practical value. Use as a basic tool of simulation models of complex cargo operation allows estimating the effectiveness of the capital investments, the level of operating costs, as well as the quality of meeting the demands of potential customers in transportations at the stage of

  6. Application of H infinite control to ship steering system

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Because the general object of ship steering control system is singular, the state of rudder force and the state of disturbance are separated, and the generalized yaw output disturbance is obtained. Furthermore, singular system control problem of ship yaw and sway coupled system is transferred into nonsingular standard control problem. Then according to the linear fractional denoting algorithm of the rational function parameter perturbation system, the Linear Fractional Transform (LFT) model of yaw and sway coupled motion is solved, which is used to design the ship steering robust control system. For the ship steering system with the uncertain parameters, the robust control law is designed based on H∞μ-synthesis. And the robust performance of the system is analyzed and the simulation validation is made. Simulation results show that the designed control system has excellent control effect and robustness.

  7. On steering a sailing ship in a wearing maneuver

    DEFF Research Database (Denmark)

    Jouffroy, Jerome

    Compared to more conventional ships, little attention was given to nonlinear control design for ships sailing by the wind. Following our previous work, this paper addresses the issue of trajectory and reference input generation for a model that imitates the general behavior of sailing vessels. Sp....... Specifically, we consider the generation of paths to perform a wearing maneuver. A feedforward controller scheme is then introduced to steer the modeled vehicle along this maneuver, and simulation results are presented as an illustration.......Compared to more conventional ships, little attention was given to nonlinear control design for ships sailing by the wind. Following our previous work, this paper addresses the issue of trajectory and reference input generation for a model that imitates the general behavior of sailing vessels...

  8. Ship Systems Staging Diagrams for DDG-37 Class Ships.

    Science.gov (United States)

    1977-12-01

    Naval Air Systems Command ( NA VELEX - Naval Electronics Systems CommandNAVSEA - Naval Sea Systems Command NA VSEC - Naval Ships Engineering Center...Configuration Accounting System (SECAS) 93.2 . 3 Technical Systems Commands (NAVSEA, NA VELEX ) . 9 3. 2. 4 Type Commanders (TYCOMs~ 9I 3. 2. 5 Nava l Ships

  9. Cargo transportation by two species of motor protein

    CERN Document Server

    Zhang, Yunxin

    2012-01-01

    The cargo motion in living cells transported by two species of motor protein with different intrinsic directionality is discussed in this study. Similar to single motor movement, cargo steps forward and backward along microtubule stochastically. Recent experiments found that, cargo transportation by two motor species has a memory, it does not change its direction as frequently as expected, which means that its forward and backward step rates depends on its previous motion trajectory. By assuming cargo has only the least memory, i.e. its step direction depends only on the direction of its last step, two cases of cargo motion are detailed analyzed in this study: {\\bf (I)} cargo motion under constant external load; and {\\bf (II)} cargo motion in one fixed optical trap. Due to the existence of memory, for the first case, cargo can keep moving in the same direction for a long distance. For the second case, the cargo will oscillate in the trap. The oscillation period decreases and the oscillation amplitude increase...

  10. On the Global Ship Hull Bending Energy in Ship Collisions

    DEFF Research Database (Denmark)

    Pedersen, Preben Terndrup; Li, Y.

    2004-01-01

    During ship collisions part of the kinetic energy of the involved vessels prior to contact is absorbed as energy dissipated by crushing of the hull structures, by friction and by elastic energy. The purpose of this report is to present an estimate of the elastic energy that can be stored in elastic...... absorbed by the struck ship normally is small and varies from 1 to 6 % of the energy released for crushing. The energy stored as elastic global hull girder vibrations depends on the ship mass, the local stiffness of the side structure, and of the position of contact. The results also show that for highly...... hull vibrations during a ship collision. When a ship side is strengthened in order to improve the crashworthiness it has been argued in the scientific literature that a non trivial part of the energy released for structural deformation during the collision can be absorbed as elastic energy in global...

  11. On the global ship hull bending energy in ship collisions

    DEFF Research Database (Denmark)

    Pedersen, Preben Terndrup; Li, Yujie

    2009-01-01

    be stored in elastic hull vibrations during a ship collision. When a ship side is strengthened in order to improve the crashworthiness it has been argued in the scientific literature that a non-trivial part of the energy released for structural deformation during the collision can be absorbed as elastic...... energy absorbed by the struck ship normally is small and varies from 1 to 6% of the energy released for crushing. The energy stored as elastic global hull girder vibrations depends on the ship mass, the local stiffness of the side structure, and of the position of contact. The results also show......During ship collisions part of the kinetic energy of the involved vessels immediately prior to contact is absorbed as energy dissipated by crushing of the hull structures, by friction and by elastic energy. The purpose of this report is to present an estimate of the elastic energy that can...

  12. On Impact Mechanics in Ship Collisions

    DEFF Research Database (Denmark)

    Pedersen, Preben Terndrup; Zhang, Shengming

    1998-01-01

    The purpose of this paper is to present analytical, closed-form expressions for the energy released for crushing and the impact impulse during ship collisions. Ship-ship collisions, ship collisions with rigid walls and ship collisions with flexible offshore structures are considered. The derived ...

  13. Assembly and Transport of Microscopic Cargos via Reconfigurable Photoactivated Magnetic Microdockers.

    Science.gov (United States)

    Martinez-Pedrero, Fernando; Massana-Cid, Helena; Tierno, Pietro

    2017-05-01

    The realization of micromotors able to dock and transport microscopic objects in a fluid medium has direct applications toward the delivery of drugs and chemicals in small channels and pores, and the realization of functional wireless microrobots in lab-on-a-chip technology. A simple and general method to tow microscopic particles in water by using remotely controllable light-activated hematite microdockers is demonstrated. These anisotropic ferromagnetic particles can be synthesized in bulk and present the remarkable ability to be activated by light while independently manipulated via external fields. The photoactivation process induces a phoretic flow capable to attract cargos toward the surface of the propellers, while a rotating magnetic field is used to transport the composite particles to any location of the experimental platform. The method allows the assembling of small colloidal clusters of various sizes, composed by a skeleton of mobile magnetic dockers, which cooperatively keep, transport, and release the microscopic cargos. The possibility to easily reconfigure in situ the location of the docker above the cargo is demonstrated, which enables optimize transport and cargo release operations. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  14. Estimating ship emissions based on AIS data for port of Tianjin, China

    Science.gov (United States)

    Chen, Dongsheng; Zhao, Yuehua; Nelson, Peter; Li, Yue; Wang, Xiaotong; Zhou, Ying; Lang, Jianlei; Guo, Xiurui

    2016-11-01

    A detailed exhaust emission inventory of ships by using Automatic Identification System (AIS) data was developed for Tianjin Port, one of the top 10 world container ports and the largest port in North China. It was found that in 2014, ship emissions are 2.93 × 104, 4.13 × 104, 4.03 × 103, 3.72 × 103, 1.72 × 103 and 3.57 × 103 tonnes of SO2, NOx, PM10, PM2.5, NMVOC and CO respectively, which are equivalent to 11.07%, 9.40%, 2.43%, 3.10%, 0.43% and 0.16% respectively of the non-ship anthropogenic totals in Tianjin. The total CO2 emissions is approximately 1.97 × 106 tonnes. The container ships and dry bulk cargo ships contributed about 70% of the total ship emissions of NOx, SO2 and PM10. Pollutants were mainly emitted during cruise and hotelling modes, and the highest intensities of emissions located in the vicinity of fairways, berth and anchorage areas in Tianjin Port. Distinctive difference between the lowest (February) and the highest (September) monthly emissions is due to the adjustment of freight volume during the Chinese New Year and the months before and after it.

  15. Precautionay Seizure of Civil Ship

    Directory of Open Access Journals (Sweden)

    Ciprian Alexandrescu

    2011-05-01

    Full Text Available Noting that many pending cases in the maritime and river sections of the courts concern the seizureof commercial ships, we intend to study in detail this institution of maritime law. This approach is due to thefact that the few Romanian law-writers, and especially the practitioners, who have approached the subject,have referred in particular to comment and interpretation of existing rules in the Commercial Code and theCivil Procedure Code, not considering the relationship between other institutions of maritime law and seizingthe ship. In our opinion the mentioned institution of law can not be examined thoroughly without priorinvestigation of what is the ship which is subject to seizure. Moreover, the ship is at the heart of all legalresearch on shipping. The concept of ship has been controversial since the seventeenth century, with the firstregulations that led to the development and adoption of commercial codes, and it is still controversial today.We can say that the diversity of opinions, expressed both in the legal literature and legal practice, on theconcept of ship, is largely due to the technical progress of shipping in modern times, this transport meanbenefiting from exceptional facilities to ensure a safely water transport of goods and people.

  16. Ship exhaust gas plume cooling

    NARCIS (Netherlands)

    Schleijpen, H.M.A.; Neele, P.P.

    2004-01-01

    The exhaust gas plume is an important and sometimes dominating contributor to the infrared signature of ships. Suppression of the infrared ship signatures has been studied by TNO for the Royal Netherlands Navy over considerable time. This study deals with the suppression effects, which can be achiev

  17. NATO Standards for Virtual Ships

    NARCIS (Netherlands)

    Kraker, J.K. de; Duncan, J.; Budde, E.W.; Reading, R.

    2005-01-01

    The NATO Naval Armaments Group Sub-Group 61 on Virtual Ships has been chartered to establish NATO standards for modeling and simulation applied to ship acquisition. Its objective is to enable multi-national simulation re-use and interoperability, as well as simulation composability. Technical activi

  18. Hydroelastic Vibrations of Ships

    DEFF Research Database (Denmark)

    Jensen, Jørgen Juncher; Folsø, Rasmus

    2002-01-01

    A formula for the necessary hull girder bending stiffness required to avoid serious springing vibrations is derived. The expression takes into account the zero crossing period of the waves, the ship speed and main dimensions. For whipping vibrations the probability of exceedance for the combined...... wave- and whipping induced bending moment is derived under the assumption that the maximum peak value in a whipping sequence occurs simultaneously with a peak in sagging wave-induced bending moment, but that the magnitudes of these two peaks are statistically independent. The expression can be written...... as the usual Rayleigh distribution for the wave response multiplied by a factor independent of the significant wave height. Finally, the springing and whipping predictions are compared with model test results....

  19. Ship Roll Damping Control

    DEFF Research Database (Denmark)

    Perez, Tristan; Blanke, Mogens

    2012-01-01

    The technical feasibility of roll motion control devices has been amply demonstrated for over 100 years. Performance, however, can still fall short of expectations because of difficulties associated with control system designs, which have proven to be far from trivial due to fundamental performance...... limitations and large variations of the spectral characteristics of wave-induced roll motion. This tutorial paper presents an account of the development of various ship roll motion control systems together with the challenges associated with their design. It discusses the assessment of performance...... and the applicability of different mathematical models, and it surveys the control methods that have been implemented and validated with full scale experiments. The paper also presents an outlook on what are believed to be potential areas of research within this topic....

  20. Ship of Fools

    OpenAIRE

    Boullet, Vanessa

    2012-01-01

    Ship of Fools est un essai polémique sur les différents éléments qui, selon Fintan O’Toole, ont contribué à la chute du Tigre Celtique : hommes politiques incompétents, souvent corrompus et pourtant réélus par les Irlandais, banquiers et promoteurs cupides, et enfin régulations inexistantes dans la gestion des affaires du pays. La thèse principale que développe O’Toole, journaliste et intellectuel de gauche, est que l’Irlande a d’une certaine manière importé sa modernité économique (passant r...

  1. ATHLETE: A Cargo-Handling Vehicle for Solar System Exploration

    Science.gov (United States)

    Wilcox, Brian H.

    2011-01-01

    As part of the NASA Exploration Technology Development Program, the Jet Propulsion Laboratory is developing a vehicle called ATHLETE: the All-Terrain Hex-Limbed Extra-Terrestrial Explorer. Each vehicle is based on six wheels at the ends of six multi-degree-of-freedom limbs. Because each limb has enough degrees of freedom for use as a general-purpose leg, the wheels can be locked and used as feet to walk out of excessively soft or other extreme terrain. Since the vehicle has this alternative mode of traversing through or at least out of extreme terrain, the wheels and wheel actuators can be sized for nominal terrain. There are substantial mass savings in the wheel and wheel actuators associated with designing for nominal instead of extreme terrain. These mass savings are comparable-to or larger-than the extra mass associated with the articulated limbs. As a result, the entire mobility system, including wheels and limbs, can be about 25% lighter than a conventional mobility chassis. A side benefit of this approach is that each limb has sufficient degrees-of-freedom to use as a general-purpose manipulator (hence the name "limb" instead of "leg"). Our prototype ATHLETE vehicles have quick-disconnect tool adapters on the limbs that allow tools to be drawn out of a "tool belt" and maneuvered by the limb. A power-take-off from the wheel actuates the tools, so that they can take advantage of the 1+ horsepower motor in each wheel to enable drilling, gripping or other power-tool functions. Architectural studies have indicated that one useful role for ATHLETE in planetary (moon or Mars) exploration is to "walk" cargo off the payload deck of a lander and transport it across the surface. Recent architectural approaches are focused on the concept that the lander descent stage will use liquid hydrogen as a propellant. This is the highest performance chemical fuel, but it requires very large tanks. A natural geometry for the lander is to have a single throttleable rocket engine on

  2. A task analysis of pier side ship-handling for virtual environment ship-handling simulator scenario development

    OpenAIRE

    Grassi, Charles R.

    2000-01-01

    Approved for public release: distribution is unlimited Researchers at the Naval Air Warfare Center Training Systems Divisions (NAWCTSD) in Orlando, FL have developed a testbed for the Conning Officer Virtual Environment (COVE) Ship-handling simulator. The purpose of this task analysis was to provide a workable document that they could use in the development of pier side ship-handling scenarios for their simulator. The task analysis not only identified the general procedures and methodologi...

  3. Occupational accidents aboard merchant ships

    DEFF Research Database (Denmark)

    Hansen, H.L.; Nielsen, D.; Frydenberg, Morten

    2002-01-01

    Objectives: To investigate the frequency, circumstances, and causes of occupational accidents aboard merchant ships in international trade, and to identify risk factors for the occurrence of occupational accidents as well as dangerous working situations where possible preventive measures may...... be initiated. Methods: The study is a historical follow up on occupational accidents among crew aboard Danish merchant ships in the period 1993–7. Data were extracted from the Danish Maritime Authority and insurance data. Exact data on time at risk were available. Results: A total of 1993 accidents were...... rate of accidents than Danish citizens. Age was a major risk factor for accidents causing permanent disability. Change of ship and the first period aboard a particular ship were identified as risk factors. Walking from one place to another aboard the ship caused serious accidents. The most serious...

  4. Identification of Dynamically Positioned Ships

    Directory of Open Access Journals (Sweden)

    Thor I. Fossen

    1996-04-01

    Full Text Available Todays model-based dynamic positioning (DP systems require that the ship and thruster dynamics are known with some accuracy in order to use linear quadratic optical control theory. However, it is difficult to identify the mathematical model of a dynamically posititmed (DP ship since the ship is not persistently excited under DP. In addition the ship parameter estimation problem is nonlinear and multivariable with only position and thruster state measurements available for parameter estimation. The process and measurement noise must also be modeled in order to avoid parameter drift due to environmental disturbances and sensor failure. This article discusses an off-line parallel extended Kalman filter (EKF algorithm utilizing two measurement series in parallel to estimate the parameters in the DP ship model. Full-scale experiments with a supply vessel are used to demonstrate the convergence and robustness of the proposed parameter estimator.

  5. High SHIP2 Expression Indicates Poor Survival in Colorectal Cancer

    Directory of Open Access Journals (Sweden)

    Ju Yang

    2014-01-01

    Full Text Available SH2-containing inositol 5′-phosphatase 2 (SHIP2, which generally regulates insulin signaling, cytoskeleton remodeling, and receptor endocytosis, has been suggested to play a significant role in tumor development and progression. However, the associations between SHIP2 expression and the clinical features to evaluate its clinicopathologic significance in colorectal cancer (CRC have not been determined yet. In the present study, one-step quantitative real-time polymerase chain reaction (qPCR test and immunohistochemistry (IHC analysis with CRC tissue microarrays (TMA were employed to evaluate the mRNA and protein expression of SHIP2 in CRC. The results showed that SHIP2 expression in the mRNA and protein levels was significantly higher in CRC tissues than that in corresponding noncancerous tissues (both P<0.05. The expression of SHIP2 protein in CRC was related to lymph node metastasis (P=0.036, distant metastasis (P=0.001, and overall survival (P=0.009. Kaplan-Meier method and Cox multifactor analysis suggested that high SHIP2 protein level (P=0.040 and positive distant metastasis (P=0.048 were critically associated with the unfavorable survival of CRC patients. The findings suggested that SHIP2 may be identified as a useful prognostic marker in CRC and targeting CRC may provide novel strategy for CRC treatment.

  6. A Model of Ship Auxiliary System for Reliable Ship Propulsion

    Directory of Open Access Journals (Sweden)

    Dragan Martinović

    2012-03-01

    Full Text Available The main purpose of a vessel is to transport goods and passengers at minimum cost. Out of the analysis of relevant global databases on ship machinery failures, it is obvious that the most frequent failures occur precisely on the generator-running diesel engines. Any failure in the electrical system can leave the ship without propulsion, even if the main engine is working properly. In that case, the consequences could be devastating: higher running expenses, damage to the ship, oil spill or substantial marine pollution. These are the reasons why solutions that will prevent the ship being unable to manoeuvre during her exploitation should be implemented. Therefore, it is necessary to define a propulsion restoration model which would not depend on the primary electrical energy. The paper provides a model of the marine auxiliary system for more reliable propulsion. This includes starting, reversing and stopping of the propulsion engine. The proposed solution of reliable propulsion model based on the use of a shaft generator and an excitation engine enables the restoration of propulsion following total failure of the electrical energy primary production system, and the self-propelled ship navigation. A ship is an important factor in the Technology of Transport, and the implementation of this model increases safety, reduces downtime, and significantly decreases hazards of pollution damage.KEYWORDSreliable propulsion, failure, ship auxiliary system, control, propulsion restoration

  7. Numerical Simulation on Ship Bubbly Wake

    Institute of Scientific and Technical Information of China (English)

    Huiping Fu; Pengcheng Wan

    2011-01-01

    Based on a volume of fluid two-phase model imbedded in the general computational fluid dynamics code FLUENT6.3.26,the viscous flow with free surface around a model-scaled KRISO container ship(KCS)was first numerically simulated.Then with a rigid-lid-free-surface method,the underwater flow field was computed based on the mixture multiphase model to simulate the bubbly wake around the KCS hull.The realizable k-ε two-equation turbulence model and Reynolds stress model were used to analyze the effects of turbulence model on the ship bubbly wake.The air entrainment model,which is relative to the normal velocity gradient of the free surface,and the solving method were verified by the qualitatively reasonable computed results.

  8. The time constrained multi-commodity network flow problem and its application to liner shipping network design

    DEFF Research Database (Denmark)

    Karsten, Christian Vad; Pisinger, David; Røpke, Stefan

    2015-01-01

    The multi-commodity network flow problem is an important sub-problem in several heuristics and exact methods for designing route networks for container ships. The sub-problem decides how cargoes should be transported through the network provided by shipping routes. This paper studies the multi......-commodity network flow problem with transit time constraints which puts limits on the duration of the transit of the commodities through the network. It is shown that for the particular application it does not increase the solution time to include the transit time constraints and that including the transit time...

  9. 29 CFR 1917.14 - Stacking of cargo and pallets.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 7 2010-07-01 2010-07-01 false Stacking of cargo and pallets. 1917.14 Section 1917.14 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION... pallets. Cargo, pallets and other material stored in tiers shall be stacked in such a manner as to provide...

  10. 49 CFR 180.405 - Qualification of cargo tanks.

    Science.gov (United States)

    2010-10-01

    ... protection or other appropriate accident damage protection device. (v) A cargo tank may be constructed of.... (l) MC 300, MC 301, MC 302, MC 303, MC 305, MC 306 cargo tank—Rear accident damage protection. (1... accident damage protection device to protect the tank and piping in the event of a rear-end collision...

  11. 75 FR 35318 - Cargo Insurance for Property Loss or Damage

    Science.gov (United States)

    2010-06-22

    ... cargo insurance with FMCSA is essential to prevent fraud. The commenter stated that many instances of insurance fraud have been thwarted by having an independent government source for checking carrier insurance... Federal Motor Carrier Safety Administration 49 CFR Parts 365 and 387 RIN 2126-AB21 Cargo Insurance for...

  12. 76 FR 41278 - Cargo Security Risk Reduction; Public Listening Sessions

    Science.gov (United States)

    2011-07-13

    ... SECURITY Coast Guard Cargo Security Risk Reduction; Public Listening Sessions AGENCY: Coast Guard, DHS..., transfer, and storage of Certain Dangerous Cargo (CDC) in bulk within the U.S. Marine Transportation System....Bergan@uscg.mil . SUPPLEMENTARY INFORMATION: Background In September 2009, the Coast Guard held a...

  13. Information tecnology and its impact on port cargo distribution businness

    OpenAIRE

    Trampus, Francesca

    2002-01-01

    The IT revolution has dynamised the port cargo business: up-to-date software is needed to optimize operations such as vessel loading, yard planning, equipment flow, gate handling, administration and invoicing and it is also essential for vessel tracking, electronic declaration of cargo and passengers and as a communication platform to all port users.

  14. 49 CFR 175.78 - Stowage compatibility of cargo.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Stowage compatibility of cargo. 175.78 Section 175... Loading, Unloading and Handling § 175.78 Stowage compatibility of cargo. (a) For stowage on an aircraft..., Compatibility Group S, explosives are permitted to be transported aboard a passenger aircraft. Only...

  15. 46 CFR 35.30-40 - Flammable liquid and gas fuels as ship's stores-TB/ALL.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Flammable liquid and gas fuels as ship's stores-TB/ALL... OPERATIONS General Safety Rules § 35.30-40 Flammable liquid and gas fuels as ship's stores—TB/ALL. Flammable liquids and gases other than diesel fuel, to be used as fuel for approved equipment must satisfy...

  16. The applicability of Aes commercial and naval ships

    Energy Technology Data Exchange (ETDEWEB)

    Nienhuis, U. [Netheerlands Institute for Maritime Research (Netherlands); Dingemanse, R.P. [Imtech Marine and Industry (Netherlands); Van Vugt, J. [TNO-Bouw/CMC (Netherlands); Cock, J. de [HMA Power Systems (Netherlands); Boonstra, H. [Delf Univ. of Technology (Netherlands); Van der Ploeg, B. [Royal Netherlands Navy (Netherlands)

    2000-07-01

    The paper presents the main findings of the recently completed Dutch national study on All Electric Ships. The study aimed to identify and quantify the pros and cons of AES for commercial and naval ships. In the course of the study a general model, called GES, was developed to assess the (financial) consequences of AES. The model allows for the definition of arbitrary power plant concepts, irrespective of their nature. An estimate of future developments was included to gauge the evolution of the cost-benefit balance of AES. With the help of this model, a number of ships were investigated relative to their suitability for AFS. The paper presents the employed evaluation tool in some detail. Further the main findings for some of the ships are presented. The general applicability of the all-electric concept for ships is dealt with, and the most promising candidates are singled out. The authors also review the main development work remaining for AES to take off for a wide range of ships. (authors)

  17. Vacuolar transport in tobacco leaf epidermis cells involves a single route for soluble cargo and multiple routes for membrane cargo.

    Science.gov (United States)

    Bottanelli, Francesca; Foresti, Ombretta; Hanton, Sally; Denecke, Jürgen

    2011-08-01

    We tested if different classes of vacuolar cargo reach the vacuole via distinct mechanisms by interference at multiple steps along the transport route. We show that nucleotide-free mutants of low molecular weight GTPases, including Rab11, the Rab5 members Rha1 and Ara6, and the tonoplast-resident Rab7, caused induced secretion of both lytic and storage vacuolar cargo. In situ analysis in leaf epidermis cells indicates a sequential action of Rab11, Rab5, and Rab7 GTPases. Compared with Rab5 members, mutant Rab11 mediates an early transport defect interfering with the arrival of cargo at prevacuoles, while mutant Rab7 inhibits the final delivery to the vacuole and increases cargo levels in prevacuoles. In contrast with soluble cargo, membrane cargo may follow different routes. Tonoplast targeting of an α-TIP chimera was impaired by nucleotide-free Rha1, Ara6, and Rab7 similar to soluble cargo. By contrast, the tail-anchored tonoplast SNARE Vam3 shares only the Rab7-mediated vacuolar deposition step. The most marked difference was observed for the calcineurin binding protein CBL6, which was insensitive to all Rab mutants tested. Unlike soluble cargo, α-TIP and Vam3, CBL6 transport to the vacuole was COPII independent. The results indicate that soluble vacuolar proteins follow a single route to vacuoles, while membrane spanning proteins may use at least three different transport mechanisms.

  18. Transporting "exceptional cargo" on the CERN sites

    CERN Multimedia

    EN Department

    2012-01-01

    When the Transport Service is managing "exceptional cargo", the driver and the escort are often in charge of an operation involving equipment worth many hundred thousand francs. Equipment that may well be irreplaceable for a facility or an experiment.   The members of the Transport Service who carry out these tasks are very professional and are – needless to say – highly concentrated on the job. They count on your understanding and support in the traffic on site. Their convoys are – for good reasons – moving slowly. Kindly do not overtake, do not cut in in front of them and do not drive too closely. Respect the escort and do not position yourself between the truck and the escort vehicles. The EN department counts on your courtesy on the road.  

  19. Production Balance of Ship Erection

    Institute of Scientific and Technical Information of China (English)

    JIANG Ru-hong; TAN Jia-hua; LIU Cun-gen

    2008-01-01

    A network plan model of ship erection was established based on the network planning technologyand the work-package breakdown system. The load-oriented production control method was introduced to buildup a throughput diagram model thus it is possible to describe the ship erection process numerically. Based onthe digitaiized models some cases of production balance of ship erection were studied and three balance indexeswere put forward, they are the load balance rate, the input manpower balance rate and the maximum gantrycrane operating times. Such an analytic method based on the balance evaluation is the important foundationfor digitization and intelligentization of shipyard production management.

  20. 基于自适应输出反馈的船舶航向控制%Control of Ship Course Based on NN-Adaptive Output Feedback

    Institute of Scientific and Technical Information of China (English)

    王志文; 彭秀艳

    2011-01-01

    针对复杂海情下的航向跟踪问题,提出基于神经网络的自适应输出反馈控制方法.利用Lyapunov稳定性理论,证明了该控制设计方法的稳定性.为克服航向角速度难以测量的问题,应用线性观测器进行状态估计,并结合神经网络拟合了复杂海况下的水动力不确定参数.为增强控制器的鲁棒性,对所设计的控制器进行了重新修正,使其具有更好的抗干扰能力.以一艘货船为例,进行了航向在10°和-10°间连续改变的仿真实验,结果表明设计的控制器具有船舶操纵的良好动态性能,且具有无超调、鲁棒性强的优点.%This paper proposes the NN-adaptive output feedback control method for ship course tracking problem. The stability of the controller is proved by Lyapunov stability theory. The proposed controller only needs the measurable information of course angle, and the unknown disturbances in the complicated sea environment are estimated by neural network. To enhance the robustness of the controller, the structure of controller was designed again by adjusting some parameters and an example with a general cargo ship was shown to verify the effectiveness of the proposed controller. Simulations, with ship course continues changing between 10° and —10°,illustrate that the design controller has strong robustness and good dynamic performance without overshooting.

  1. Analysis of International Commodity Shipping Data and the Shipment of NORM to the United States

    Energy Technology Data Exchange (ETDEWEB)

    Baciak, James E.; Ely, James H.; Schweppe, John E.; Sandness, Gerald A.; Robinson, Sean M.

    2011-10-01

    As part of the Spreader Bar Radiation Detector project, PNNL analyzed US import data shipped through US ports collected over the 12 months of 2006 (over 4.5 million containers). Using these data, we extracted a variety of distributions that are of interest to modelers and developers of active and passive detection systems used to 'scan' IMCCs for potential contraband. This report expands on some of the analysis presented in an earlier report from LLNL, by investigation the foreign port distribution of commodities shipped to the US. The majority of containers shipped to the United States are 40 ft containers ({approx}70%); about 25% are 20 ft; and about 3.6% are 45 ft containers. A small fraction (<1%) of containers are of other more specialized sizes, and very few ports actually ship these unique size containers (a full distribution for all foreign ports is shown in Appendix A below). The primary foreign ports that ship the largest fraction of each container are shown in the table below. Given that 45 ft containers comprise 1 of out every 27 containers shipped to the US, and given the foreign ports from which they are shipped, they should not be ignored in screening; further testing and analysis of radiation measurements for national security with this size container is warranted. While a large amount of NORM is shipped in IMCCs, only a few specific commodities are shipped with enough frequency to present potential issues in screening IMCCs at ports. The majority of containers with NORM will contain fertilizers (5,700 containers), granite (59,000 containers), or ceramic (225,000 containers) materials. Fertilizers were generally shipping in either 20- or 40 ft containers with equal frequency. While granite is mostly shipped in 20 ft containers, ceramic materials can be shipped in either 20- or 40 ft containers. The size of container depended on the specific use of the ceramic or porcelain material. General construction ceramics (such as floor and roofing

  2. WMO Selected, Supplemenatary, Auxiliary Ships

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — World Meteorological Organization International List of Selected, Supplementary and Auxiliary Ships, recognized as Publication 47. 1973-1998 editions, gathered from...

  3. Anomalous transport of subdiffusing cargos by single kinesin motors: the role of mechanochemical coupling and anharmonicity of tether

    CERN Document Server

    Goychuk, Igor

    2014-01-01

    Here we generalize our previous model of molecular motors trafficking subdiffusing cargos in viscoelastic cytosol by (i) including mechanochemical coupling between cyclic conformational fluctuations of the motor protein driven by the reaction of ATP hydrolysis and its translational motion within the simplest two-state model of hand-over-hand motion of kinesin, and also (ii) by taking into account the anharmonicity of the tether between the motor and cargo (its maximally possible extension length). It is shown that the major earlier results such as occurrence of normal versus anomalous transport depending on the amplitude of binding potential, cargo size and the motor turnover frequency not only survive in this more realistic model, but the results also look very similar for the correspondingly adjusted parameters. However, this more realistic model displays a substantially larger thermodynamic efficiency due to a bidirectional mechanochemical coupling. For realistic parameters, the maximal thermodynamic effic...

  4. Black carbon emissions from in-use ships: a California regional assessment

    Directory of Open Access Journals (Sweden)

    G. M. Buffaloe

    2013-09-01

    Full Text Available Black carbon (BC mass emission factors (EFBC; g-BC (kg-fuel−1 from a variety of ocean going vessels have been determined from measurements of BC and carbon dioxide (CO2 concentrations in ship plumes intercepted by the R/V Atlantis during the 2010 California Nexus (CalNex campaign. The ships encountered were all operating within 24 nautical miles of the California coast and were utilizing relatively low sulphur fuels. Black carbon concentrations within the plumes, from which EFBC values are determined, were measured using four independent instruments: a photoacoustic spectrometer and a particle soot absorption photometer, which measure light absorption, and a single particle soot photometer and soot particle aerosol mass spectrometer, which measure the mass concentration of refractory BC directly. The measured EFBC have been divided into vessel type categories and engine type categories, from which averages have been determined. The geometric average EFBC, determined from over 71 vessels and 135 plumes encountered, was 0.31 g-BC (kg-fuel−1. The most frequent engine type encountered was the slow speed diesel (SSD, and the most frequent SSD vessel type was the cargo ship sub-category. Average and median EFBC values from the SSD category are compared with previous observations from the Texas Air Quality Study (TexAQS in 2006, during which the ships encountered were predominately operating on high sulphur fuels. There is a statistically significant difference between the EFBC values from CalNex and TexAQS for SSD vessels and for the cargo and tanker ship types within this engine category. The CalNex EFBC values are lower than those from TexAQS, suggesting that operation on lower sulphur fuels is associated with smaller EFBC values.

  5. Modeling of the electric ship

    OpenAIRE

    2010-01-01

    Approved for public release; distribution is unlimited As the United States Navy continues to refine its designs for future ships, one approach that it is currently being explored is to use a unified electrical grid to power every system aboard a ship, including propulsion and weapons. Some concerns with this design are estimating the power demands placed upon the grid by various systems and anticipating transients induced on the grid by high power pulsed loads. The first part of this thes...

  6. Lifecycle Readiness and Ship Deployment

    Science.gov (United States)

    2013-06-01

    The physical fatigue associated with ship motions has significant consequences for today’s minimally manned ships. “Because of minimally sized...a deployment. The inefficiencies in performance may develop from lack of training, different personal aptitude, and individual’s mental or physical ...exacerbation of symptoms known as the avalanche phenomenon follows which includes: increased salivation, bodily warmth , and light- headedness” (Stevens

  7. Technical-Economic Analysis of Photovoltaik Reverse Osmosis Planning for Fulfillment of Fresh Water System on Ro-Pax Ship

    Directory of Open Access Journals (Sweden)

    Edi Jadmiko

    2017-09-01

    Full Text Available The need for fresh water in the world of industry is increasing with the rapid development of the global industry. The shipping industry is having a significant impact as part of a global industry concerning the sector of freshwater demand on ships. Freshwater supplies on ro-pax vessels are very important because they are the source of crew and passenger life when ships sail. Fulfillment of freshwater needs on a ro-pax vessel is made in a conventional system by filling clean water into a freshwater tank from the port. In this final project will be analyzed technical and economical on designing fresh water system using reverse osmosis system with solar panel as power supply and compare it with conventional system on ship KM. SABUK NUSANTARA 56. This Final Project includes installation design, size of fresh water tank, amount of cargo, investment cost and operational cost. The conclusion obtained in this final project is a reverse osmosis (RO system with solar panels as a very efficient power supply when applied to ro-pax ships such as ships KM SABUK NUSANTARA 56 because with this system the ship is able to produce their own fresh water, the size of the freshwater tank is smaller, for new shiploads can be increased. For the percentage of total cost of fresh water needs is dearer about 52 percent compared to conventional system and payload value increased 29.2 percent compared to conventional system.

  8. Time-domain Hydroelasticity Theory of Ships Responding to Waves

    DEFF Research Database (Denmark)

    Xia, Jinzhu; Wang, Zhaohui

    1997-01-01

    is represented by a non-uniform beam, while the generalized hydrodynamic coefficients can be obtained from two-dimensional potential flow theory. The linear slender body theory is generalized to treat the non-linear loading effects of rigid motion and structural response of ships travelling in rough seas....... The non-linear hydrostatic restoring force and hydrodynamic momentum action are considered. A numerical solution is presented for the slender body theory. Numerical examples are given for two ship cases with different geometry features, a warship hull and the S175 containership with two different bow...

  9. Neutron and Photon Transport in Sea-Going Cargo Containers

    Energy Technology Data Exchange (ETDEWEB)

    Pruet, J; Descalle, M; Hall, J; Pohl, B; Prussin, S G

    2005-02-09

    Factors affecting sensing of small quantities of fissionable material in large sea-going cargo containers by neutron interrogation and detection of {beta}-delayed photons are explored. The propagation of variable-energy neutrons in cargos, subsequent fission of hidden nuclear material and production of the {beta}-delayed photons, and the propagation of these photons to an external detector are considered explicitly. Detailed results of Monte Carlo simulations of these stages in representative cargos are presented. Analytical models are developed both as a basis for a quantitative understanding of the interrogation process and as a tool to allow ready extrapolation of the results to cases not specifically considered here.

  10. CALCULATION ON THE UPRIGHTING PROCESS OF A CAPSIZED SHIP

    Directory of Open Access Journals (Sweden)

    De-wei Pan

    2016-09-01

    Full Text Available The processes of marine salvage require firstly the uprighting of the capsized ship, essentially bringing the deck to point up. Analysis and computation are the keys for the success in the application of the design schemes. Up to date, there are few researches on calculation methods for uprighting process of capsized ships at China and abroad. Researches about the effect of flooding quantity and the variation of the longitudinal strength during the uprighting process of capsized and damaged ships are even rarer. In this paper, hydromechanical equations to describe the effect of flooding are established and a calculation method for the longitudinal strength is introduced with reference to the hydrostatic theory for ships. Three typical uprighting processes are summarized according to the methods of treatment of damaged compartment. The stability of the inverted ship is calculated and analyzed using the General Hydrostatics software(GHS. Reserve buoyancy, shear forces, bending moments and torques are calculated in nine positions along the ship.

  11. Examination of SR101 shipping packages

    Energy Technology Data Exchange (ETDEWEB)

    Daugherty, W. L. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-03-01

    Four SR101 shipping packages were removed from service and provided for disassembly and examination of the internal fiberboard assemblies. These packages were 20 years old, and had experienced varying levels of degradation. Two of the packages were successfully disassembled and fiberboard samples were removed from these packages and tested. Mechanical and thermal property values are generally comparable to or higher than baseline values measured on fiberboard from 9975 packages, which differs primarily in the specified density range. While baseline data for the SR101 material is not available, this comparison with 9975 material suggests that the material properties of the SR101 fiberboard have not significantly degraded.

  12. On impact mechanics in ship collisions

    DEFF Research Database (Denmark)

    Pedersen, Preben Terndrup; Zhang, Shengming

    1998-01-01

    The purpose of this paper is to present analytical, closed-form expressions for the energy released for crushing and the impact impulse during ship collisions. Ship–ship collisions, ship collisions with rigid walls and ship collisions with flexible offshore structures are considered. The derived ...... of illustrative examples are presented. The procedure presented in the paper is well suited for inclusion in a probabilistic calculation model for damage of ship structures due to collisions....

  13. Determinan Pilihan Pelanggan Terhadap Layanan Cargo Pada PT. Garuda Indonesia Cabang Makassar

    OpenAIRE

    RESPATI., TRIADHI

    2012-01-01

    2012 Penelitian ini bertujuan untuk menganalisis perbedaan pilihan pelanggan terhadap layanan cargo dan memperoleh faktor perbedaan dalam keputusan pilihan pelanggan terhadap layanan cargo. Sedangkan metode analisis yang digunakan adalah analisis deskriptif, analisis kuantitatif dan uji hipotesis. Berdasarkan hasil analisis perbedaan pilihan pelanggan layanan cargo dari masing-masing perusahaan cargo (GIA, Lion Air, Sriwijaya Air dan PT. Wings Air) ternyata ada perbedaan yang signifikan...

  14. 19 CFR 122.117 - Requirements for transit air cargo transport.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Requirements for transit air cargo transport. 122... Requirements for transit air cargo transport. (a) Transportation—(1) Port to port. Transit air cargo may be... cargo, a receipt shall be given. The receipt shall be made by the airline responsible for transport...

  15. Aggregating Secondary Source Data for Air Cargo Prescreening Project

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose to improve the effectiveness of air cargo prescreening by enabling background knowledge about companies and products to be used for threat assessment. The...

  16. Cargo/Weapons Elevator Land Based Engineering Site

    Data.gov (United States)

    Federal Laboratory Consortium — The Cargo and Weapons Facility consists of a suite of full scale and component test facilities contiguously located in building 77H. The site was constructed in 1987...

  17. Stochastic modeling of cargo transport by teams of molecular motors

    CERN Document Server

    Klein, Sarah; Santen, Ludger

    2014-01-01

    Many different types of cellular cargos are transported bidirectionally along microtubules by teams of molecular motors. The motion of this cargo-motors system has been experimentally characterized in vivo as processive with rather persistent directionality. Different theoretical approaches have been suggested in order to explore the origin of this kind of motion. An effective theoretical approach, introduced by M\\"uller et al., describes the cargo dynamics as a tug-of-war between different kinds of motors. An alternative approach has been suggested recently by Kunwar et al., who considered the coupling between motor and cargo in more detail. Based on this framework we introduce a model considering single motor positions which we propagate in continuous time. Furthermore, we analyze the possible influence of the discrete time update schemes used in previous publications on the system's dynamic.

  18. Cargo Loading Facilities, Published in unknown, Arizona Department of Transportation.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Cargo Loading Facilities dataset as of unknown. Data by this publisher are often provided in State Plane coordinate system; in a Transverse Mercator projection;...

  19. Bidirectionality From Cargo Thermal Fluctuations in Motor-Mediated Transport

    CERN Document Server

    Miles, Christopher E

    2016-01-01

    Molecular motor proteins serve as an essential component of intracellular transport by generating forces to haul cargoes along cytoskeletal filaments. In some circumstances, two species of motors that are directed oppositely (e.g. kinesin, dynein) can be attached to the same cargo. The resulting net motion is known to be bidirectional, but the mechanism of switching remains unclear. In this work, we propose a mean-field mathematical model of the mechanical interactions of two populations of molecular motors with diffusion of the cargo (thermal fluctuations) as the fundamental noise source. By studying a simplified model, the delayed response of motors to rapid fluctuations in the cargo is quantified, allowing for the reduction of the full model to two "characteristic positions" of each of the motor populations. The system is then found to be "metastable", switching between two distinct directional transport states, or bidirectional motion. The time to switch between these states is then investigated using WKB...

  20. ATV Cargo Integration Safety Certification Process

    Science.gov (United States)

    Garbellini, L.; Heimann, T. J.

    2005-12-01

    A large number of manned modules are being progressively launched to the International Space Station (ISS) and integrated on-orbit, required to be operated and maintained over long on-orbit stay time, supported by periodical servicing and supply.The European Space Agency (ESA), together with its several industrial aerospace contractors such as Alcatel Alenia Space, is deeply involved in development of space systems hardware, in planning and execution of mission operations, logistics and supply to ISS of consumables, payloads, scientific experiments, orbital replacement units up to station modules and infrastructures, as needed by the ISS utilization cycles. In this frame safety plays a significant role to assure that the safety of the systems is preserved throughout the ISS exploitation phase. This paper summarizes methods and requirements for the safety certification process being implemented to dry cargo integration and accommodation in Jules Verne, the 1st flight of the Automated Transfer Vehicle (ATV), one of the major ESA contributions to the utilization of ISS.

  1. Air Cargo Transportation Route Choice Analysis

    Science.gov (United States)

    Obashi, Hiroshi; Kim, Tae-Seung; Oum, Tae Hoon

    2003-01-01

    Using a unique feature of air cargo transshipment data in the Northeast Asian region, this paper identifies the critical factors that determine the transshipment route choice. Taking advantage of the variations in the transport characteristics in each origin-destination airports pair, the paper uses a discrete choice model to describe the transshipping route choice decision made by an agent (i.e., freight forwarder, consolidator, and large shipper). The analysis incorporates two major factors, monetary cost (such as line-haul cost and landing fee) and time cost (i.e., aircraft turnaround time, including loading and unloading time, custom clearance time, and expected scheduled delay), along with other controls. The estimation method considers the presence of unobserved attributes, and corrects for resulting endogeneity by use of appropriate instrumental variables. Estimation results find that transshipment volumes are more sensitive to time cost, and that the reduction in aircraft turnaround time by 1 hour would be worth the increase in airport charges by more than $1000. Simulation exercises measures the impacts of alternative policy scenarios for a Korean airport, which has recently declared their intention to be a future regional hub in the Northeast Asian region. The results suggest that reducing aircraft turnaround time at the airport be an effective strategy, rather than subsidizing to reduce airport charges.

  2. A multiple ship routing and speed optimization problem under time, cost and environmental objectives

    DEFF Research Database (Denmark)

    Wen, M.; Pacino, Dario; Kontovas, C.A.

    2017-01-01

    The purpose of this paper is to investigate a multiple ship routing and speed optimization problem under time, cost and environmental objectives. A branch and price algorithm as well as a constraint programming model are developed that consider (a) fuel consumption as a function of payload, (b......) fuel price as an explicit input, (c) freight rate as an input, and (d) in-transit cargo inventory costs. The alternative objective functions are minimum total trip duration, minimum total cost and minimum emissions. Computational experience with the algorithm is reported on a variety of scenarios....

  3. SIMULATIONS FOR ACTIVE INTERROGATION OF HEU IN CARGO CONTAINERS

    Energy Technology Data Exchange (ETDEWEB)

    LEE, SANG Y. [Los Alamos National Laboratory; BEDDINGFIELD, DAVID H. [Los Alamos National Laboratory; PARK, JAEYOUNG [Los Alamos National Laboratory

    2007-01-22

    We describe the results of a Monte Carlo simulation 10 investigate the feasibility of using a pulsed deuterium-tritium (D-T) neutron technique for active interrogation of special nuclear material in cargo containers. Time distributions of fission neutrons from highly enriched uranium induced by a pulsed D-T neutron source were calculated for cargo containers with different hydrogen contents. A simple detector system with polyethylene and cadmium was modeled to calculate the two-group neutron flux at the detector.

  4. Reducing Aerodynamic Drag on Empty Open Cargo Vehicles

    Science.gov (United States)

    Ross, James C.; Storms, Bruce L.; Dzoan, Dan

    2009-01-01

    Some simple structural modifications have been demonstrated to be effective in reducing aerodynamic drag on vehicles that have empty open cargo bays. The basic idea is to break up the airflow in a large open cargo bay by inserting panels to divide the bay into a series of smaller bays. In the case of a coal car, this involves inserting a small number (typically between two and four) of vertical full-depth or partial-depth panels.

  5. Modern approaches to cargo protection of rail transportation

    Directory of Open Access Journals (Sweden)

    Денис Викторович Ломотько

    2014-12-01

    Full Text Available On the basis of the study we have proposed a number of measures to improve the cargo protection during rail transportation. The economic impact of some of them is estimated. The legal relations of railways and cargo owners in terms of liability for failure to preserve are considered and proposed the management model of insurance risks of failure to preserve in transportation.

  6. Effect of Buffer Bow Structure in Ship-Ship Collision

    DEFF Research Database (Denmark)

    Yamada, Yasuhira; Endo, Hisayoshi; Pedersen, Preben Terndrup

    2008-01-01

    tankers, the introduction of buffer bulbous bows has been proposed. Relatively soft buffer bows absorb part of the kinetic energy of the striking ship before penetrating the inner hull of the struck vessel. The purpose of the present paper is to verify the effectiveness of a prototype buffer bulbous bow......) and the forward velocity of the struck ship on the collapse mode of the bow of the striking vessel are investigated. Collapse modes, contact forces and energy absorption capabilities of the buffer bows are compared with those of conventional bows....

  7. EX1001 Ship Shakedown (EX1001, EM302) on NOAA Ship Okeanos Explorer in Hawaiian Islands

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The ship has been alongside for repairs and leave since November, 2009. The ship shakedown cruise is scheduled to provide an opportunity for the ship to get underway...

  8. Phototriggered cargo release from virus-like assemblies.

    Science.gov (United States)

    Brasch, Melanie; Voets, Ilja K; Koay, Melissa S T; Cornelissen, Jeroen J L M

    2013-01-01

    There has been tremendous progress towards the development of responsive polymers that are programmed to respond to an external stimulus such as light, pH and temperature. The unique combination of molecular packaging followed by slow, controlled release of molecular cargo is of particular importance for self-healing materials and the controlled release of drugs. While much focus and progress remains centred around synthetic carriers, viruses and virus-like particles can be considered ideal cargo carriers as they are intrinsically designed to package, protect and deliver nucleic acid cargo to host cells. Here, we report the encapsulation of a stimuli-responsive self-immolative polymer within virus-like assemblies of Cowpea Chlorotic Mottle Virus. Upon photo-irradiation, the self-immolative polymer undergoes a head-to-tail depolymerization into its monomeric subunits, resulting in the slow release of the molecular cargo. We propose that the liberated monomers are small enough to diffuse through the pores of the virus capsid shell and offer an alternative strategy for the controlled loading and unloading of the molecular cargo using viruses as cargo carriers.

  9. Orienting Ocean Bottom Seismic Sensors from Ship Noise Polarization Analysis

    Science.gov (United States)

    Barruol, Guilhem; Dreo, Richard; Fontaine, Fabrice R.; Scholz, John R.; Sigloch, Karin; Geay, Bruno; Bouillon, Alexandre

    2017-04-01

    For the RHUM-RUM project (Réunion Hotspot and Upper Mantle - Réunions Unterer Mantel, www.rhum-rum.net), a network of 57 ocean-bottom seismometers (OBS) was installed on the ocean floor around La Réunion Island in the SW Indian Ocean. Part of the network happened to be located beneath a route of heavy ship traffic connecting SE-Asia and the South-Atlantic region. We analysed the ship noise recorded on the OBS and show that it can be used for determining the horizontal orientations of the seismic instruments as they were recording on the ocean floor. The OBS, provided by the German DEPAS and the French INSU OBS national pools, were equipped with wide-band or broad-band three-components seismic and hydro-acoustic sensors. They were deployed in Nov. 2012 by R/V Marion Dufresne and recovered by R/V Meteor one year later. Depending on the configuration, the OBS recorded for 8 to 13 months. By combining the trajectories of passing ships - provided by AIS (Automatic Identification system) GPS data - with our geophysical data recorded on the ocean floor, we show that both hydro-acoustic and seismic spectral analyses exhibit clear signals associated with vessels between 1 and 50 Hz, in the high-frequency range of our instruments. Large cargo vessels are detected several hours before and after their closest point of approach (CPA) and show clear Doppler effects which put quantitative constraints on their distances and speeds. By analysing the continuous noise polarization on the three seismic components, we show that the polarization of the noise emitted by ships passing in the neighbourhood of an ocean-bottom seismometer can be used for retrieving the orientation of the OBS horizontal components on the ocean floor with respect to the geographic reference frame. We find good agreement between OBS orientations thus calculated from ship noise and the OBS orientations determined independently from teleseismic body and surface wave polarization methods (Scholz et al., GJI

  10. Traditional Sailing Ships as Indigenous Dalmatian Nautical Product

    Directory of Open Access Journals (Sweden)

    Srećko Favro

    2015-10-01

    Full Text Available Modern tourist movements of the development of selective tourism forms have offered an opportunity to implement the valorisation of Croatian littoral area through the development of nautical tourism in all its forms, cruising included. As opposed to international cruise market, where the main word have cruisers with few hundred to several thousand passengers, a special type of multi-day cruising or excursion cruising along Croatian coast on traditional Croatian sailing ships has significantly developed in the last few years. Wooden sailing ships have a magical power to attract. They won’t pass unnoticed regardless a huge competition of new trends in constructing technologically perfect modern mega-yachts and the most sophisticated mega-cruisers. In this paper, several traditional sailing ships will be described. They were primary intended to transport cargo, and today they’re renovated with saloons, kitchens, toilets, bathrooms, air-conditioners and satellite TV receivers. Modern usage of this, for Croatian culture, important indigenous product promotes specificities of Croatian maritime and shipbuilding tradition, creates recognition and authenticity of nautical tourism in Croatia and creates also numerous other positive effects such as promotion of middle and small shipbuilding and employment of local inhabitants on islands that at the same time prevents their depopulation. In order to achieve full potential of this form of Croatian nautical offer it is necessary to invest and to motivate main carriers of activities – small ship owners. Besides the need for economic incentives, it is also very important a joint defining of maritime routes for touristic cruising in the way to select ports that, with the state support, would be renovated to accept cruisers. It is also necessary to set a system of planned cruises and berth reservations by a careful selection of favourable locations. This would enable organisation stages and coordination

  11. 26 CFR 509.107 - Income from operation of ships or aircraft.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 19 2010-04-01 2010-04-01 false Income from operation of ships or aircraft. 509.107 Section 509.107 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) REGULATIONS UNDER TAX CONVENTIONS SWITZERLAND General Income Tax § 509.107 Income from operation of ships or aircraft. Under Article V of...

  12. 26 CFR 521.107 - Income from operation of ships or aircraft.

    Science.gov (United States)

    2010-04-01

    ...) REGULATIONS UNDER TAX CONVENTIONS DENMARK General Income Tax Taxation of Nonresident Aliens Who Are Residents of Denmark and of Danish Corporations § 521.107 Income from operation of ships or aircraft. The income derived from the operation of ships or aircraft registered in Denmark by a nonresident alien...

  13. Seakeeping Behaviour of High Speed Ships: An Experimental and Numerical Study

    NARCIS (Netherlands)

    De Jong, P.

    2011-01-01

    In recent years, great progress has been made in both the optimisation of the seakeeping behaviour of fast ships and the development of efficient numerical methods for computation of the seakeeping behaviour of ships in general. The study presented in the thesis aims to integrate both developments.

  14. Reliability Based Ship Structural Design

    DEFF Research Database (Denmark)

    Dogliani, M.; Østergaard, C.; Parmentier, G.;

    1996-01-01

    with developments of models of load effects and of structural collapse adopted in reliability formulations which aim at calibrating partial safety factors for ship structural design. New probabilistic models of still-water load effects are developed both for tankers and for containerships. New results are presented......This paper deals with the development of different methods that allow the reliability-based design of ship structures to be transferred from the area of research to the systematic application in current design. It summarises the achievements of a three-year collaborative research project dealing...... structure of several tankers and containerships. The results of the reliability analysis were the basis for the definition of a target safety level which was used to asses the partial safety factors suitable for in a new design rules format to be adopted in modern ship structural design. Finally...

  15. A Matheuristic for the Liner Shipping Network Design Problem with Transit Time Restrictions

    DEFF Research Database (Denmark)

    Brouer, Berit Dangaard; Desaulniers, Guy; Karsten, Christian Vad

    2015-01-01

    We present a mathematical model for the liner shipping network design problem with transit time restrictions on the cargo flow. We extend an existing matheuristic for the liner shipping network design problem to consider transit time restrictions. The matheuristic is an improvement heuristic, where...... an integer program is solved iteratively as a move operator in a large-scale neighborhood search. To assess the effects of insertions/removals of port calls, flow and revenue changes are estimated for relevant commodities along with an estimation of the change in the vessel cost. Computational results...... on the benchmark suite LINER-LIB are reported, showing profitable networks for most instances. We provide insights on causes for rejecting demand and the average speed per vessel class in the solutions obtained....

  16. Effect of the Northern Sea Route Opening to the Shipping Activities at Malacca Straits

    Directory of Open Access Journals (Sweden)

    N.S.F. Abdul Rahman

    2014-12-01

    Full Text Available The opening of the Northern Sea Route as an alternative route for transporting cargoes between the Far East and Europe seems highly acceptable by shipping companies due to the great saving in fuel consumption, bunker cost, operating cost, emissions and journey time. This situation will not only affect the maritime business activity in the Straits of Malacca but also, the Malaysian economy in different perspectives when the vessels sail via the Suez Canal and the Indian Ocean are expected to decrease. The objective of this study is to analyse the implication in the opening of the Northern Sea Route on Maritime Sector of the Malaysian economy by using PESTEL analysis. The main scope is focusing more on the Malacca Straits shipping activity by using a number of parameters that have been obtained from Port Klang and Port Klang Authority through a set of questionnaires and interview sessions with industrial experts.

  17. Comparative International Air Cargo Solutions: The Pathway to a Resilient, Adaptable, Balanced and Sustainable Secure Global Air Cargo Supply Chain

    Science.gov (United States)

    2013-12-01

    systems. Dr. Gerald L. Dillinham, the Director of Physical Infrastructure Issues, GAO noted during his testimony that securing the nation’s aviation...9697. Karp , Aaron. “Air Cargo Flattens Out.” Air Transport World 46, no. 1 (2009): 37–39. 74 Kersey, J. W. “The Economics of Air Cargo (Analysis of...Transportation, U.S. Senate. Aviation Security: Progress since September 11, 2001, and the Challenges Ahead. Statement of Gerald L. Dillingham

  18. Ship Emission Inventories in Estuary of the Yangtze River Using Terrestrial AIS Data

    Directory of Open Access Journals (Sweden)

    Xin Yao

    2016-12-01

    Full Text Available Estuary forms a transition zone between inland river and open sea. In China, the estuary of the Yangtze River plays a vital role in connecting the inland and oversea shipping, and witnesses heavy vessel traffic in the recent decades. Nowadays, more attentions have been directed to the issue of ship pollution in busy waterways. In order to investigate the ship emission inventory, this paper presents an Automatic Identification System(AIS based method. AIS data is the realistic data of vessel traffic including dynamic information (position, speed, course, etc. and static information (ship type, dimensions, name, etc.. According to ship dimensions, the power of engines is estimated for different ship types. By using AIS based bottom-up approach, ship emission inventories and shares of air pollutants and GHGs (Greenhouse gases are developed. Spatial distribution of ship emissions is illustrated in the form of heat map. As a case study, the emission inventories are analyzed using AIS data of 2010 in the estuary, and following results are made:(1 shares of the emission are cruise ships 6.59%, bulk carriers 5.16%, container ships 52.96%, tankers 15.16%, fishing ships 9.16%, other ships 10.97%; (2 CO2 is the dominant part of the emission. (3 Areas of highest emission intensity are generally clustered around the South Channel, the North Channel and ports in the vicinity. The proposed method is promising because it is derived from the AIS data which contains not only real data of individual ship but also vessel traffic situation in the study area. It can server as a reference for other researchers and policy makers working in this field.

  19. Legal risk management in shipping

    DEFF Research Database (Denmark)

    Siig, Kristina

    The book discusses the most typical legal challenges met in the chartering, broker, agent or port management part of the shipping industry. It discusses these issues in both English and Scandinavian law and gives indications on how to best ensure your legal risk management in these parts of the i......The book discusses the most typical legal challenges met in the chartering, broker, agent or port management part of the shipping industry. It discusses these issues in both English and Scandinavian law and gives indications on how to best ensure your legal risk management in these parts...

  20. Competitive Liner Shipping Network Design

    DEFF Research Database (Denmark)

    Karsten, Christian Vad; Brouer, Berit Dangaard; Pisinger, David

    2017-01-01

    We present a solution method for the liner shipping network design problem which is a core strategic planning problem faced by container carriers. We propose the first practical algorithm which explicitly handles transshipment time limits for all demands. Individual sailing speeds at each service...... are presented showing very promising results for realistic global liner shipping networks. Due to a number of algorithmic enhancements, the obtained solutions can be found within the same time frame as used by previous algorithms not handling time constraints. Furthermore, we present a sensitivity analysis...

  1. Visualization of Ship Risk Profiles for the Shipping Industry

    NARCIS (Netherlands)

    S. Knapp (Sabine); M. van de Velden (Michel)

    2010-01-01

    textabstractThis article uses correspondence analysis to visualize risk profiles and their changes over the time period 1977 to 2008. It is based on a unique dataset which combines incident data and ship particular data. The risk profiles can help stakeholders better understand the relationship of

  2. Failure of cargo aileron’s actuator

    Directory of Open Access Journals (Sweden)

    G. Zucca

    2014-10-01

    Full Text Available During a ferry flight, in a standard operation condition and at cruising level, a military cargo experienced a double hydraulic system failure due to a structural damage of the dual booster actuator. The booster actuator is the main component in mechanism of aileron’s deflection. The crew was able to arrange an emergency landing thanks to the spare oil onboard: load specialists refilled the hydraulic reservoirs. Due to safety concerns and in order to prevent the possibility of other similar incidents, a technical investigation took place. The study aimed to carry out the analysis of root causes of the actuator failure. The Booster actuator is composed mainly by the piston rod and its aluminum external case (AA7049. The assembly has two bronze caps on both ends. These are fixed in position by means of two retainers. At one end of the actuator case is placed a trunnion: a cylindrical protrusion used as a pivoting point on the aircraft. The fracture was located at one end of the case, on the trunnion side, in correspondence to the cap and over the retainer. One of the two fracture surfaces was found separated to the case and with the cap entangled inside. The fracture surfaces of the external case indicated fatigue crack growth followed by ductile separation. The failure analysis was performed by means of optical, metallographic, digital and electronic microscopy. The collected evidences showed a multiple initiation fracture mechanism. Moreover, 3D scanner reconstruction and numerical simulation demonstrated that dimensional non conformances and thermal loads caused an abnormal stress concentration. Stress concentration was located along the case assy outer surface where the fatigue crack originated. The progressive rupture mechanism grew under cyclical axial load due to the normal operations. Recommendations were issued in order to improve dimensional controls and assembly procedures during production and overhaul activities.

  3. Possibilities in ship design. Trends and techniques

    Energy Technology Data Exchange (ETDEWEB)

    Levander, K. [Kvaerner Masa-Yards Technology (Finland)

    1994-12-31

    The paper relates to ship design by new technologies. The base for ship design will be modules and modulated systems. Modulated products form the base for mechanized production and only mechanized production processes can be automated. Ships will still be tailor-made for each trade and customer. Modulation and standardization will be based on common features found in the hull, machinery and equipment of all ships. Only the payload related outfitting will vary for different ship types. Even new, advanced ship concepts can be developed following this concept. Trends in this development are discussed. 24 figs.

  4. Logistics worldwide for the whole nuclear cycle. Nuclear Cargo + Service GmbH; Weltweite Logistik im gesamten Nuklear-Kreislauf. Nuclear Cargo + Service GmbH

    Energy Technology Data Exchange (ETDEWEB)

    Geiger, Horst; Schymke, Klaus [Nuclear Cargo + Service GmbH, Hanau (Germany)

    2011-03-15

    Nuclear Cargo + Service GmbH (NCS) offers logistics worldwide for the whole nuclear cycle to fuel manufacturers, reactor operators, and waste management companies. Transport equipment and interim stores are part of the company's facilities. The firm's Front End unit conducts transnational transports of yellow cake, uranium hexafluoride, and enriched uranium and uranium from reprocessing. In the Back End unit, the company performs worldwide transports of spent fuel elements of research reactors. Another key area of activity is shipment of radioactive waste ranging from low-level waste to HAW (highly active waste generating heat). In its Component Disposal area, NCS offers a variety of transport services up to and including large components, e.g. reactor pressure vessels, both on the road and by rail and ship. NCS operates storage halls of its own for storing radioactive materials including radioactive waste. The technical equipment of NCS comprises a large pool of road and rail transport vehicles as well as a great number of vessels for radioactive materials. (orig.)

  5. Ship Navigation Simulator Study Upper Mobile Bay Channel.

    Science.gov (United States)

    1985-10-01

    Garner III of the Mathematical Modeling Group, under the general supervision of Messrs. Henry B. Simmons and Frank A. Herrmann , Jr., former and successive...CHANNEL. SHIP AT COAL TERMINAL tee - .. . . . . ,STARO,.o--. ,, ;,’,: . . 0- NED ARIGO CHANEL SHI -AT: ,.. CA- TERMINA -e is* * %o*p -. I- a 4 a 6 10 18 14

  6. Ship Design Manager (SDM) and Systems Integration Manager (SIM) Manual

    Science.gov (United States)

    2012-02-13

    ISO 9001 Quality Management Systems - Requirements NAVSEAINST 4855.33, Application of the International Organization for Standardization ( ISO ) 9000...Standardization ( ISO ) industry standards ( ISO 10303 STEP) in place specifying content and format for exchanging ship product model data. Prototype...translators have been built for several CAD systems, but they are not generally commercially available at present. The ISO standards are applicable to

  7. The Arsenal Ship Measures up to Joint Vision 2010.

    Science.gov (United States)

    1997-02-07

    Multiwarfare 8 ibid., 1-4. Analytical Game ( JMAG ), and approved by a senior review board of .-retired general and flag officers from all four...operat ions . ൛ The arsenal ship could reduce the logistics requirements during a regional contingency conflict. As detailed in the JMAG report

  8. An assessment of air emissions from liquefied natural gas ships using different power systems and different fuels.

    Science.gov (United States)

    Afon, Yinka; Ervin, David

    2008-03-01

    The shipping industry has been an unrecognized source of criteria pollutants: nitrogen oxides (NOx), volatile organic compounds, coarse particulate matter (PM10), fine particulate matter (PM2.5), sulfur dioxide (SO2), and carbon monoxide (CO). Liquefied natural gas (LNG) has traditionally been transported via steam turbine (ST) ships. Recently, LNG shippers have begun using dual-fuel diesel engines (DFDEs) to propel and offload their cargoes. Both the conventional ST boilers and DFDE are capable of burning a range of fuels, from heavy fuel oil to boil-off-gas (BOG) from the LNG load. In this paper a method for estimating the emissions from ST boilers and DFDEs during LNG offloading operations at berth is presented, along with typical emissions from LNG ships during offloading operations under different scenarios ranging from worst-case fuel oil combustion to the use of shore power. The impact on air quality in nonattainment areas where LNG ships call is discussed. Current and future air pollution control regulations for ocean-going vessels (OGVs) such as LNG ships are also discussed. The objective of this study was to estimate and compare emissions of criteria pollutants from conventional ST and DFDE ships using different fuels. The results of this study suggest that newer DFDE ships have lower SO2 and PM2.5/PM10 emissions, conventional ST ships have lower NOx, volatile organic compound, and CO emissions; and DFDE ships utilizing shore power at berth produce no localized emissions because they draw their required power from the local electric grid.

  9. An Algorithm for Interpolating Ship Motion Vectors

    Directory of Open Access Journals (Sweden)

    Qinyou Hu

    2014-03-01

    Full Text Available Interpolation of ship motion vectors is able to be used for estimating the lost ship AIS dynamic information, which is important for replaying marine accidents and for analysing marine traffic data. The previous methods can only interpolate ship's position, while not including ship's course and speed. In this paper, vector function is used to express the relationship between the ship's time and space coordinates, and the tangent of the vector function and its change rate are able to express physical characteristics of ship's course, speed and acceleration. The given AIS dynamic information can be applied to calculate the parameters of ship's vector function and then the interpolation model for ship motion vectors is developed to estimate the lost ship dynamic information at any given moment. Experiment results show that the ship motion vector function is able to depict the characteristics of ship motions accurately and the model can estimate not only the ship's position but also ship's course and speed at any given moment with limited differences.

  10. Cargo binding activates myosin VIIA motor function in cells.

    Science.gov (United States)

    Sakai, Tsuyoshi; Umeki, Nobuhisa; Ikebe, Reiko; Ikebe, Mitsuo

    2011-04-26

    Myosin VIIA, thought to be involved in human auditory function, is a gene responsible for human Usher syndrome type 1B, which causes hearing and visual loss. Recent studies have suggested that it can move processively if it forms a dimer. Nevertheless, it exists as a monomer in vitro, unlike the well-known two-headed processive myosin Va. Here we studied the molecular mechanism, which is currently unknown, of activating myosin VIIA as a cargo-transporting motor. Human myosin VIIA was present throughout cytosol, but it moved to the tip of filopodia upon the formation of dimer induced by dimer-inducing reagent. The forced dimer of myosin VIIA translocated its cargo molecule, MyRip, to the tip of filopodia, whereas myosin VIIA without the forced dimer-forming module does not translocate to the filopodial tips. These results suggest that dimer formation of myosin VIIA is important for its cargo-transporting activity. On the other hand, myosin VIIA without the forced dimerization module became translocated to the filopodial tips in the presence of cargo complex, i.e., MyRip/Rab27a, and transported its cargo complex to the tip. Coexpression of MyRip promoted the association of myosin VIIA to vesicles and the dimer formation. These results suggest that association of myosin VIIA monomers with membrane via the MyRip/Rab27a complex facilitates the cargo-transporting activity of myosin VIIA, which is achieved by cluster formation on the membrane, where it possibly forms a dimer. Present findings support that MyRip, a cargo molecule, functions as an activator of myosin VIIA transporter function.

  11. Designing Indonesian Liner Shipping Network

    Directory of Open Access Journals (Sweden)

    Armand Omar Moeis

    2017-06-01

    Full Text Available As the largest archipelago nation in the world, Indonesia’s logistics system has not shown excellence according to the parameters of logistics performance index and based on logistics costs percentages from overall GDP. This is due to the imbalances of trading on the western and eastern regions in Indonesia, which impacts the transportation systems costs to and from the eastern regions. Therefore, it is imperative to improve the competitiveness of Indonesian maritime logistics through maritime logistics network design. This research will focus on three levels of decision making in logistics network design, which include type of ships in the strategic level, shipping routes in the tactical level, and container allocation in the operational level with implementing butterfly routes in Indonesia’s logistics networking problems. Furthermore, this research will analyze the impact of Pendulum Nusantara and Sea Toll routes against the company profits and percentages of containers shipped. This research will also foresee how demand uncertainties and multi-period planning should affect decision making in designing the Indonesian Liner Shipping Network.

  12. Single liner shipping service design

    DEFF Research Database (Denmark)

    Plum, Christian Edinger Munk; Pisinger, David; Salazar-González, Juan-José

    2014-01-01

    demand under commercially driven constraints. This paper introduces the Single Liner Shipping Service Design Problem. Arc-flow and path-flow models are presented using state-of-the-art elements from the wide literature on pickup and delivery problems. A Branch-and-Cut-and-Price algorithm is proposed...

  13. Legal risk management in shipping

    DEFF Research Database (Denmark)

    Siig, Kristina

    The book discusses the most typical legal challenges met in the chartering, broker, agent or port management part of the shipping industry. It discusses these issues in both English and Scandinavian law and gives indications on how to best ensure your legal risk management in these parts...

  14. Modeling of Ship Propulsion Performance

    DEFF Research Database (Denmark)

    Pedersen, Benjamin Pjedsted; Larsen, Jan

    2009-01-01

    Full scale measurements of the propulsion power, ship speed, wind speed and direction, sea and air temperature, from four different loading conditions has been used to train a neural network for prediction of propulsion power. The network was able to predict the propulsion power with accuracy bet...

  15. Rudder roll stabilization for ships

    NARCIS (Netherlands)

    Amerongen, van J.; Klugt, van der P.G.M.; Nauta Lemke, van H.R.

    1990-01-01

    This paper describes the design of an autopilot for rudder roll stabilization for ships. This autopilot uses the rudder not only for course keeping but also for reduction of the roll. The system has a series of properties which make the controller design far from straightforward: the process has onl

  16. Norovirus transmission on cruise ship.

    Science.gov (United States)

    Isakbaeva, Elmira T; Widdowson, Marc-Alain; Beard, R Suzanne; Bulens, Sandra N; Mullins, James; Monroe, Stephan S; Bresee, Joseph; Sassano, Patricia; Cramer, Elaine H; Glass, Roger I

    2005-01-01

    An outbreak of norovirus gastroenteritis affected passengers on two consecutive cruises of ship X and continued on 4 subsequent cruises despite a 1-week sanitization. We documented transmission by food and person-to-person contact; persistence of virus despite sanitization onboard, including introductions of new strains; and seeding of an outbreak on land.

  17. SHIP CLASSIFICATION FROM MULTISPECTRAL VIDEOS

    Directory of Open Access Journals (Sweden)

    Frederique Robert-Inacio

    2012-05-01

    Full Text Available Surveillance of a seaport can be achieved by different means: radar, sonar, cameras, radio communications and so on. Such a surveillance aims, on the one hand, to manage cargo and tanker traffic, and, on the other hand, to prevent terrorist attacks in sensitive areas. In this paper an application to video-surveillance of a seaport entrance is presented, and more particularly, the different steps enabling to classify mobile shapes. This classification is based on a parameter measuring the similarity degree between the shape under study and a set of reference shapes. The classification result describes the considered mobile in terms of shape and speed.

  18. Project CarGO tram at Dresden; Projekt CarGo Tram in Dresden

    Energy Technology Data Exchange (ETDEWEB)

    Mueller-Eberstein, F.; Franke, M. [Dresdner Verkehrsbetriebe AG, Dresden (Germany)

    2000-05-01

    Next year, the Glassen Volkswagen Factory, which is currently under construction, will commence the production of luxury class automobiles. Already buying a car is meant to be a special event; thus the factory is set in a baroque environment, near the famous Semper Opera and Picture Gallery. This arrangement, hitherto without example, will be accompanied by another, equally remarkable project. The factory, which is situated in a central city area being very sensitive in terms of urban development and traffic installations, will be delivered raw materials and parts using a CarGo Tram. Two bi-directionally operated, 60 metres long five-car trains will transport the parts from the railway cargo hub at Dresden Friedrichstadt to the factory in cycles of 40 minutes. There and at the Glassen Factory in Grosser Garten, separate track terminals will be built. In addition to the historic past and the charming scenery of the Elbe metropolis Dresden and its environs, soon also the CarGo Tram and the Glassen Factory will attract guests from all over the world to visit this innovative and culturally important city in the centre of Europe. (orig.) [German] Im Jahr 2001 beginnt die Produktion von Automobilen der Oberklasse in der derzeit noch im Bau befindlichen Glaesernen Manufaktur der Volkswagen Automobil-Manufaktur Dresden GmbH. In einem barocken Umfeld, mit raeumlicher Naehe zur Semperoper und Gemaeldegalerie, soll bereits der Verkauf dieser Fahrzeuge zu einem Erlebnis werden. Dieses bisher einmalige Vorhaben wird von einem zweiten, ebenso einzigartigen Vorhaben begleitet. Die Belieferung der in einem staedtebaulich und verkehrlich sensiblen Innenstadtbereich gelegenen Manufaktur erfolgt mit einer Gueterstrassenbahn. Zwei 60 Meter lange, fuenfteilige Zweirichtungsfahrzeuge werden ab Maerz 2001 etwa im 40-Minutentakt die Anlieferung der Zulieferteile aus dem Gueterverkehrszentrum Dresden-Friedrichstadt uebernehmen. Hier und an der Glaesernen Manufaktur im Grossen Garten werden

  19. Carcass or Tissue Packaging and Shipping

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — SOP on proper shipping of wildlife tissues to labs. Provides stepwise instructions and guidance on how to collect and ship wildlife carcasses, carcass parts, or...

  20. Application of Support Vector Machine to Ship Steering

    Institute of Scientific and Technical Information of China (English)

    LUO Wei-lin; ZOU Zao-jian; LI Tie-shan

    2009-01-01

    System identification is an effective way for modeling ship manoeuvring motion and ship manoeuvrability prediction. Support vector machine is proposed to identify the manoeuvring indices in four different response models of ship steering motion, including the first order linear, the first order nonlinear, the second order linear and the second order nonlinear models. Predictions of manoeuvres including trained samples by using the identified parameters are compared with the results of free-running model tests. It is discussed that the different four categories are consistent with each other both analytically and numerically. The generalization of the identified model is verified by predicting different untrained manoeuvres. The simulations and comparisons demonstrate the validity of the proposed method.

  1. Environmental Impacts of Shipping to and from Citronen Fjord

    DEFF Research Database (Denmark)

    Boertmann, D.

    A large zinc mineralisation has been discovered in the Citronen Fjord area of Peary Land, North Greenland (Fig. 1), and exploration is presently being undertaken. If it is decided that the ore will be exploited, there is only one way of transporting the zinc concentrate from the area: by ship......, and icebreaking impacts the environment in different ways. In general, it seems that noise from shipping sometimes causes short-term behavioural response and temporarily displacement of various marine mammals. Marine mammals in icecovered waters may be particularly sensitive to noise. However, the effects...... from the ships sailing to and from Citronen Fjord poses the most serious threats to the wildlife in the area covered by this report....

  2. The design of double-line five-step ship-lock of Three Gorges Project%The design of double-line five-step ship-lock of Three Gorges Project

    Institute of Scientific and Technical Information of China (English)

    Niu Xinqiang; Tong Di; Song Weibang

    2011-01-01

    The general design and layout of the double-line five-step ship-lock, the water delivery technique for high head ship-lock, the key technical problems of fully lined ship-lock and the monitoring techniques for large-scale miter gates and hoisting equipment under complicated operation conditions of Three Gorges Project (TGP) are introduced. Since the operation of ship-lock in 2003, the operation practice has proved that the design techniques are advanced, rational and reliable. The design and construction of the fully lined ship-lock promotes the development of design theory and practice of ship-lock projects, which makes the construction technology of ship-lock in the world reach a new level.

  3. Refuses and delays in the transportation by ship of radioactive material; Recusas e demoras no transporte maritimo de material radioativo

    Energy Technology Data Exchange (ETDEWEB)

    Xavier, Clarice; Sobreira, Ana Celia [REM Industria e Comercio Ltda., Sao Paulo, SP (Brazil)

    2011-10-26

    Some Class 7 materials can only be transported by ship, making that load and unload activities can be done in a port. In the Brazil, the port of Santos posses the most volume of cargo manipulation, and cargoes which contain radioactive material are always present with all manipulation requisites according to applicable regulations. The transport and manipulation operations of radioactive material are performed in accordance with national and international requisites but, some individuals posses yet a high risk perception according to our experience, involving members of Brazilian port authorities, the Navy and cargoes handlers at the ports. So, exist yet a high quantity of refuses and delays during the transport by ship. Therefore, a communication strategy was developed and applied, to inform the risk perception, supplying information on the very principles of ionizing radiation, legislation and uses of radiation, and so, diminishing the quantity of refuses and delays. From that initial communication strategy on, it becomes evident the necessity of training and conscience making a movement for the problem of refuses and delays be diminished

  4. Note from the radioprotection group's shipping service

    CERN Multimedia

    2006-01-01

    The service for the import/export of radioactive materials reminds you that shipping requests for potentially radioactive materials must be made via the EDH request form by ticking the box 'radioactive material'. All the necessary information is given on the web site: http://cern.ch/service-rp-shipping Requests not complying with the above procedure will not be taken into account. Radioactive Shipping Service http://cern.ch/service-rp-shipping Tel. 73171 Fax: 69200

  5. Optimisation of key performance measures in air cargo demand management

    Directory of Open Access Journals (Sweden)

    Alexander May

    2014-03-01

    Full Text Available This article sought to facilitate the optimisation of key performance measures utilised for demand management in air cargo operations. The focus was on the Revenue Management team at Virgin Atlantic Cargo and a fuzzy group decision-making method was used. Utilising intelligent fuzzy multi-criteria methods, the authors generated a ranking order of ten key outcome-based performance indicators for Virgin Atlantic air cargo Revenue Management. The result of this industry-driven study showed that for Air Cargo Revenue Management, ‘Network Optimisation’ represents a critical outcome-based performance indicator. This collaborative study contributes to existing logistics management literature, especially in the area of Revenue Management, and it seeks to enhance Revenue Management practice. It also provides a platform for Air Cargo operators seeking to improve reliability values for their key performance indicators as a means of enhancing operational monitoring power.

  6. Cooperative behavior of molecular motors: Cargo transport and traffic phenomena

    Science.gov (United States)

    Lipowsky, Reinhard; Beeg, Janina; Dimova, Rumiana; Klumpp, Stefan; Müller, Melanie J. I.

    2010-01-01

    All eukaryotic cells including those of our own body contain complex transport systems based on molecular motors which walk along cytoskeletal filaments. These motors are rather small and make discrete mechanical steps with a step size of the order of 10 nm but are able to pull cargo particles over much larger distances, from micrometers up to meters. In vivo, the intracellular cargos include large membrane-bounded organelles, smaller vesicles, a subset of mRNAs, cytoskeletal filaments, and various protein building blocks, which are transported between different cell compartments. This cargo transport is usually performed by teams of motors. If all motors belong to the same molecular species, the cooperative action of the motors leads to uni-directional transport with a strongly increased run length and with a characteristic force dependence of the velocity distributions. If two antagonistic teams of motors pull on the same cargo particle, they perform a stochastic tug-of-war, which is characterized by a subtle force balance between the two motor teams and leads to several distinct patterns of bi-directional transport. So far, all experimental observations on bi-directional transport are consistent with such a tug-of-war. If many motors and/or cargo particles are transported along the filaments, one encounters various traffic phenomena. Depending on their mutual interactions and the compartment geometry, the motors form various spatio-temporal patterns such as traffic jams, and undergo nonequilibrium phase transitions between different patterns of transport.

  7. Anomalous motor mediated cargo transport in microtubule networks

    Science.gov (United States)

    Vandal, Steven; Macveigh-Fierro, Daniel; Shen, Zhiyuan; Lemoi, Kyle; Vidali, Luis; Ross, Jennifer; Tuzel, Erkan

    Cargo transport is an important biological mechanism by which cells locomote, self-organize, and actively transport organelles. This transport is mediated by the cytoskeletal network and molecular motors; however, it is not known how network self-organization and dynamics affect these transport processes. In order to develop a mechanistic understanding of cargo transport, we use a coarse-grained Brownian dynamics model that incorporates the dynamics of these networks, as well as experimentally determined motor properties. We will test these models with two experimental systems: (1) in vitro microtubule networks with kinesin-1 motors, and quantum dot cargos on recreated microtubule networks, and (2) an excellent model organism, the moss Physcomitrella patens, in which chloroplasts are transported via the microtubule network by means of kinesin-like proteins. Phenomenological network characterizations are made, both in vivo and in vitro, and cargo motility is characterized using Mean Squared Displacement (MSD) measurements. Our simulations shed light on the role of network density and motor properties on the observed transport behavior, and improve our understanding of cargo transport in cells.

  8. 49 CFR 174.24 - Shipping papers.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Shipping papers. 174.24 Section 174.24... Requirements § 174.24 Shipping papers. (a) A person may not accept a hazardous material for transportation or transport a hazardous material by rail unless that person receives a shipping paper prepared in...

  9. 49 CFR 176.24 - Shipping papers.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Shipping papers. 176.24 Section 176.24... Requirements § 176.24 Shipping papers. (a) A person may not accept a hazardous material for transportation or transport a hazardous material by vessel unless that person has received a shipping paper prepared...

  10. Underwater radiated noise from modern commercial ships.

    Science.gov (United States)

    McKenna, Megan F; Ross, Donald; Wiggins, Sean M; Hildebrand, John A

    2012-01-01

    Underwater radiated noise measurements for seven types of modern commercial ships during normal operating conditions are presented. Calibrated acoustic data (autonomous seafloor-mounted acoustic recorder were combined with ship passage information from the Automatic Identification System. This approach allowed for detailed measurements (i.e., source level, sound exposure level, and transmission range) on ships of opportunity. A key result was different acoustic levels and spectral shapes observed from different ship-types. A 54 kGT container ship had the highest broadband source level at 188 dB re 1 μPa@1m; a 26 kGT chemical tanker had the lowest at 177 dB re 1 μPa@1m. Bulk carriers had higher source levels near 100 Hz, while container ship and tanker noise was predominantly below 40 Hz. Simple models to predict source levels of modern merchant ships as a group from particular ship characteristics (e.g., length, gross tonnage, and speed) were not possible given individual ship-type differences. Furthermore, ship noise was observed to radiate asymmetrically. Stern aspect noise levels are 5 to 10 dB higher than bow aspect noise levels. Collectively, these results emphasize the importance of including modern ship-types in quantifying shipping noise for predictive models of global, regional, and local marine environments.

  11. Automated Planning for Liner Shipping Fleet Repositioning

    DEFF Research Database (Denmark)

    Tierney, Kevin; Jensen, Rune Møller; Kroer, Christian

    2012-01-01

    The Liner Shipping Fleet Repositioning Problem (LSFRP) poses a large financial burden on liner shipping firms. During repositioning, vessels are moved between services in a liner shipping network. The LSFRP is characterized by chains of interacting activities, many of which have costs...

  12. Stopping of Ships Equipped with Azipods

    Directory of Open Access Journals (Sweden)

    Jacek Nowicki

    2014-09-01

    Full Text Available The paper contains a description of different possibilities of stopping a large ship equipped with azipods. The model tests were carried out to compare the effectiveness of stopping the ship using the different methods. The ship model used in stopping tests reproduces a large LNG carrier of capacity ~150 000 m3

  13. Nuclear Power and Merchant Shipping (Rev.)

    Energy Technology Data Exchange (ETDEWEB)

    Donnelly, Warren H. [Library of Congress

    1965-01-01

    This booklet tells about the use of nuclear energy for merchant ships. It explores its advantages and disadvantages, describes a nuclear merchant ship, speculates about the effect of nuclear power upon seaborne trade, and discusses some of the differences between conventional and nuclear merchant ships.

  14. 19 CFR 4.69 - Shipping articles.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Shipping articles. 4.69 Section 4.69 Customs... VESSELS IN FOREIGN AND DOMESTIC TRADES Foreign Clearances § 4.69 Shipping articles. No vessel of the U.S... officer, of the shipping articles agreements, including any seaman's allotment agreement, required by 46...

  15. Cruise ship seakeeping and passenger comfort

    NARCIS (Netherlands)

    Dallinga, R.P.; Bos, J.E.

    2010-01-01

    In the last decade the design and construction of a substantial volume of large cruise ships has stimulated the evolution of cruise ship design. The MARIN and TNO involvement in these developments, and in particular the increase in size, have lead to new insights in how the ship design governs passe

  16. Real-Time Simulation of Ship-Structure and Ship-Ship Interaction

    DEFF Research Database (Denmark)

    Lindberg, Ole; Glimberg, Stefan Lemvig; Bingham, Harry B.;

    2013-01-01

    , because it is simple, easy to implement and computationally efficient. Multiple many-core graphical processing units (GPUs) are used for parallel execution and the model is implemented using a combination of C/C++, CUDA and MPI. Two ship hydrodynamic cases are presented: Kriso Container Carrier at steady...

  17. Accidents on ships in the Danish International Ship register

    DEFF Research Database (Denmark)

    Ádám, Balázs; Rasmussen, Hanna Barbara

    Safety has been in the focus of seafaring during the past decade that observed a gradual reduction of reported work injuries in Danish ships. The injuries are, however, unevenly distributed in the maritime workforce, depending on various factors, the nationality of seafarer among them. The aim of...... the occurrence as well as the reporting of accidents is crucial to construct effective preventive measures for risk management....... to report accidents causing at least one day off work beyond the day of accident but the first source contains several accidents not fulfilling this criterion, too. Radio Medical is an independent service where all Danish ships may seek medical advice. The data sets were merged by identification number...... Western European seafarers compared to South East Asian (mostly Filipino) employees. The results highlight a favourable level of reported injuries in the Danish maritime sector but also point out detectable differences between groups of employees. The identification of factors that determine...

  18. 76 FR 30229 - Shipping Coordinating Committee; Notice of Committee Meeting

    Science.gov (United States)

    2011-05-24

    ...-committees. --Work of other bodies. --Status of conventions. --Harmful anti-fouling systems for ships... ballast water. --Recycling of ships. --Prevention of air pollution from ships. --Reduction of GHG emissions from ships. --Consideration and adoption of amendments to mandatory instruments....

  19. Ship emitted NO2 in the Indian Ocean: comparison of model results with satellite data

    Directory of Open Access Journals (Sweden)

    V. Eyring

    2008-08-01

    Full Text Available An inventory of NOx emission from international shipping has been evaluated by comparing NO2 tropospheric columns derived from the satellite instruments SCIAMACHY (January 2003 to February 2008, GOME (January 1996 to June 2003, and GOME-2 (March 2007 to February 2008 to NO2 columns calculated with the atmospheric chemistry general circulation model ECHAM5/MESSy1 (January 2000 to October 2005. The data set from SCIAMACHY yields the first monthly analysis of ship induced NO2 enhancements in the Indian Ocean. For both data and model consistently the tropospheric excess method was used to obtain mean NO2 columns over the shipping lane from India to Indonesia, and over two ship free regions, the Bay of Bengal and the central Indian Ocean. In general, the model simulates the differences between the regions affected by ship pollution and ship free regions reasonably well. Minor discrepancies between model results and satellite data were identified during biomass burning seasons in March to May over India and the Indochinese Peninsula and August to October over Indonesia. We conclude that the NOx ship emission inventory used in this study is a good approximation of NOx ship emissions in the Indian Ocean for the years 2002 to 2007. It assumes that around 6 Tg(N yr−1 are emitted by international shipping globally, resulting in 90 Gg(N yr−1 in the region of interest when using Automated Mutual Assistance Vessel Rescue System (AMVER or 72 Gg(N yr−1 when using the International Comprehensive Ocean-Atmosphere Data Set (ICOADS as spatial proxy. The results do not support some previously published lower ship emissions estimates of 3–4 Tg(N yr−1 globally, making this study the first that evaluates atmospheric response to NOx ship emission estimates from space.

  20. Reducing Mission Logistics with Multipurpose Cargo Transfer Bags

    Science.gov (United States)

    Baccus, Shelley; Broyan, James Lee, Jr.; Borrego, Melissa

    2016-01-01

    The Logistics Reduction (LR) project within Advanced Exploration Systems (AES) is tasked with reducing logistical mass and repurposing logistical items. Multipurpose Cargo Transfer Bags (MCTB) have been designed such that they can serve the same purpose as a Cargo Transfer Bag (CTB), the common logistics carrying bag for the International Space Station (ISS). After use as a cargo carrier, a regular CTB becomes trash, whereas the MCTB can be unfolded into a flat panel for reuse. Concepts and potential benefits for various MCTB applications will be discussed including partitions, crew quarters, solar radiation storm shelters, acoustic blankets, and forward osmosis water processing. Acoustic MCTBs are currently in use on ISS to reduce the noise generated by the T2 treadmill, which reaches the hazard limit at high speeds. The development of the AMCTB included identification of keep-out zones, acoustic properties, deployment considerations, and structural testing. Features developed for these considerations are applicable to MCTBs for all crew outfitting applications.