WorldWideScience

Sample records for general assembly individual

  1. General Assembly

    CERN Multimedia

    Staff Association

    2016-01-01

    5th April, 2016 – Ordinary General Assembly of the Staff Association! In the first semester of each year, the Staff Association (SA) invites its members to attend and participate in the Ordinary General Assembly (OGA). This year the OGA will be held on Tuesday, April 5th 2016 from 11:00 to 12:00 in BE Auditorium, Meyrin (6-2-024). During the Ordinary General Assembly, the activity and financial reports of the SA are presented and submitted for approval to the members. This is the occasion to get a global view on the activities of the SA, its financial management, and an opportunity to express one’s opinion, including taking part in the votes. Other points are listed on the agenda, as proposed by the Staff Council. Who can vote? Only “ordinary” members (MPE) of the SA can vote. Associated members (MPA) of the SA and/or affiliated pensioners have a right to vote on those topics that are of direct interest to them. Who can give his/her opinion? The Ordinary General Asse...

  2. General Assembly

    CERN Multimedia

    Staff Association

    2015-01-01

    Mardi 5 mai à 11 h 00 Salle 13-2-005 Conformément aux statuts de l’Association du personnel, une Assemblée générale ordinaire est organisée une fois par année (article IV.2.1). Projet d’ordre du jour : 1- Adoption de l’ordre du jour. 2- Approbation du procès-verbal de l’Assemblée générale ordinaire du 22 mai 2014. 3- Présentation et approbation du rapport d’activités 2014. 4- Présentation et approbation du rapport financier 2014. 5- Présentation et approbation du rapport des vérificateurs aux comptes pour 2014. 6- Programme 2015. 7- Présentation et approbation du projet de budget 2015 et taux de cotisation pour 2015. 8- Pas de modifications aux Statuts de l'Association du personnel proposée. 9- Élections des membres de la Commission é...

  3. General Assembly

    CERN Multimedia

    Staff Association

    2017-01-01

    Conformément aux statuts de l’Association du personnel, une Assemblée générale ordinaire est organisée une fois par année (article IV.2.1). Projet d’ordre du jour : Adoption de l’ordre du jour. Approbation du procès-verbal de l’Assemblée générale ordinaire du 5 avril 2016. Présentation et approbation du rapport d’activités 2016. Présentation et approbation du rapport financier 2016. Présentation et approbation du rapport des vérificateurs aux comptes pour 2016. Programme de travail 2017. Présentation et approbation du projet de budget 2017 Approbation du taux de cotisation pour 2018. Modifications aux Statuts de l'Association du personnel proposées. Élections des membres de la Commission électorale. Élections des vérifica...

  4. General Assembly

    CERN Multimedia

    Staff Association

    2016-01-01

    Mardi 5 avril à 11 h 00 BE Auditorium Meyrin (6-2-024) Conformément aux statuts de l’Association du personnel, une Assemblée générale ordinaire est organisée une fois par année (article IV.2.1). Projet d’ordre du jour : Adoption de l’ordre du jour. Approbation du procès-verbal de l’Assemblée générale ordinaire du 5 mai 2015. Présentation et approbation du rapport d’activités 2015. Présentation et approbation du rapport financier 2015. Présentation et approbation du rapport des vérificateurs aux comptes pour 2015. Programme de travail 2016. Présentation et approbation du projet de budget 2016 Approbation du taux de cotisation pour 2017. Modifications aux Statuts de l'Association du personnel proposée. Élections des membres de la Commissio...

  5. General assembly

    CERN Multimedia

    Staff Association

    2015-01-01

    Mardi 5 mai à 11 h 00 Salle 13-2-005 Conformément aux statuts de l’Association du personnel, une Assemblée générale ordinaire est organisée une fois par année (article IV.2.1). Projet d’ordre du jour : Adoption de l’ordre du jour. Approbation du procès-verbal de l’Assemblée générale ordinaire du 22 mai 2014. Présentation et approbation du rapport d’activités 2014. Présentation et approbation du rapport financier 2014. Présentation et approbation du rapport des vérificateurs aux comptes pour 2014. Programme 2015. Présentation et approbation du projet de budget 2015 et taux de cotisation pour 2015. Pas de modifications aux Statuts de l'Association du personnel proposée. Élections des membres de la Commission électorale. &am...

  6. Ordinary General Assembly

    CERN Multimedia

    Staff Association

    2011-01-01

    Tuesday 12 April at 14.00 Council Chamber, Bldg 503 In conformity with the Statutes of the Staff Association, an ordinary General Assembly is organized once a year (article IV.2.1). Agenda   Adoption of the Agenda Approval of the Draft Minutes of the Ordinary General Assembly of 20 April 2010 Presentation and approval of the Activity Report 2010 Presentation and approval of the Financial Report 2010 Presentation and approval of the Auditors Report 2010 Programme for 2011 Presentation et and approval of the draft budget and subscription rate 2012 Election of the Election Committee Election of the Board of Auditors Miscellaneous We remind members of article IV.3.4 in the Statutes of the Association which reads: “After having dealt with all the items on the agenda, the members may, with the consent of the Assembly, have other matters discussed, but decisions may be taken only on the items listed on the agenda. Nevertheless, the Assembly ma...

  7. Ordinary General Assembly

    CERN Multimedia

    Staff Association

    2011-01-01

    Tuesday 12 April at 14.00 Council Chamber, Bldg 503 In conformity with the Statutes of the Staff Association, an ordinary General Assembly is organized once a year (article IV.2.1). Agenda   Adoption of the Agenda Approval of the Draft Minutes of the Ordinary General Assembly of 20 April 2010 Presentation and approval of the Activity Report 2010 Presentation and approval of the Financial Report 2010 Presentation and approval of the Auditors Report 2010 Programme for 2011 Presentation and approval of the draft budget and subscription rate 2012 Election of the Election Committee Election of the Board of Auditors Miscellaneous We remind members of article IV.3.4 in the Statutes of the Association which reads: “After having dealt with all the items on the agenda, the members may, with the consent of the Assembly, have other matters discussed, but decisions may be taken only on the items listed on the agenda. Nevertheless, the Assembly may r...

  8. Ordinary General Assembly

    CERN Multimedia

    Staff Association

    2010-01-01

    Tuesday 20 April at 10.00 Council Chamber, Bldg 503 In conformity with the Statutes of the Staff Association, an ordinary General Assembly is organized once a year (article IV.2.1). Agenda   Adoption of the Agenda Approval of the Draft Minutes of the Ordinary General Assembly of 12 May 2009 Presentation and approval of the Activity Report 2009 Presentation and approval of the Financial Report 2009 Presentation and approval of the Auditors Report 2009 Programme for 2010 Presentation et and approval of the draft budget and subscription rate 2010 Election of the Election Committee Election of the Board of Auditors Miscellaneous We remind members of article IV.3.4 in the Statutes of the Association which reads: “After having dealt with all the items on the agenda, the members may, with the consent of the Assembly, have other matters discussed, but decisions may be taken only on the items listed on the agenda. Nevertheless, the Assembly may require t...

  9. Ordinary General Assembly

    CERN Multimedia

    Association du personnel

    2010-01-01

    Tuesday 20 April at 10.00 Council Chamber, Bldg 503 In conformity with the Statutes of the Staff Association, an ordinary General Assembly is organized once a year (article IV.2.1). Agenda Adoption of the Agenda Approval of the Draft Minutes of the Ordinary General Assembly of 12 May 2009 Presentation and approval of the Activity Report 2009 Presentation and approval of the Financial Report 2009 Presentation and approval of the Auditors Report 2009 Programme for 2010 Presentation et and approval of the draft budget and subscription rate 2010 Modifications to the statutes of the association Election of the Election Committee Election of the Board of Auditors Miscellaneous We remind members of article IV.3.4 in the Statutes of the Association which reads: “After having dealt with all the items on the agenda, the members may, with the consent of the Assembly, have other matters discussed, but decisions may be taken only on the items listed on the agenda...

  10. ANNUAL GENERAL ASSEMBLY

    CERN Multimedia

    2001-01-01

    All members and beneficiaries of the Pension Fund are invited to attend the Annual General Asssembly to be held in the CERN Auditorium on Wednesday 3 October 2001 at 14.30 hrs The Agenda comprises:   Opening Remarks (P. Levaux) Some aspects of risk in a pension fund (C. Cuénoud) Annual Report 2000: Presentation and results (C. Cuénoud) Copies of the Report are available from divisional secretariats. Results of the actuarial reviews (G. Maurin) Questions from members and beneficiaries Persons wishing to ask questions are encouraged to submit them, where possible, in writing in advance, addressed to Mr C. Cuénoud, Administrator of the Fund. Conclusions (P. Levaux) As usual, participants are invited to drinks after the assembly. NB The minutes of the 2000 General Assembly are available from the Administration of the Fund (tel. + 41 22 767 91 94; e-mail Graziella.Praire@cern.ch) The English version will be published next week.

  11. General Assembly debate on IAEA

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1960-01-15

    On 3 November 1959, the General Assembly of the United Nations considered the annual report of the International Atomic Energy Agency, the first report to cover a full operational year of the Agency - 1 July 1959 to 30 June 1959, more recent developments having been summarized in a preface. At the end of the debate the Assembly adopted a resolution, submitted jointly by Czechoslovakia, the Union of South Africa and the United Arab Republic, taking note of the report

  12. A generalized macro-assembler

    International Nuclear Information System (INIS)

    Kaul, Mohan Lai

    1970-01-01

    The objective of this research is to study existing macro assemblers, and to create a generalized macro assembler, MAG-I, which is a system independent of a source language, and provides the following possibilities: development of any existing language, translation from a language to another, and creation of a new language. The user can choose his own notations to define macros. The system is implemented on an IBM 360/91 computer. Programs are written in symbolic language and the input/output software is written in Fortran [fr

  13. Approach to Dynamic Assembling of Individualized Learning Paths

    Science.gov (United States)

    Lubchak, Vladimir; Kupenko, Olena; Kuzikov, Borys

    2012-01-01

    E-learning students are generally heterogeneous and have different capabilities knowledge base and needs. The aim of the Sumy State University (SSU) e-learning system project is to cater to these individual needs by assembling individual learning path. This paper shows current situation with e-learning in Ukraine, state-of-art of development of…

  14. 2007 General Assembly: Work, decisions, appeal…

    CERN Document Server

    Association du personnel

    2008-01-01

    The Staff Association General Assembly was held on 11 April in the main auditorium. According to tradition, a report of the activities of the past year was made and everyone was able to assess the extent of the work accomplished.

  15. General Assembly discusses progress report from IAEA

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1959-01-15

    According to its Statute and the Relationship Agreement with the United Nations, the International Atomic Energy Agency reports annually to the General Assembly of the United Nations on its activities during the past year. The Report is prepared for the approval of the General Conference by the Board of Governors. The second of these reports was presented by the Director General, Mr. Sterling Cole, on behalf of the Agency on October 30th 1958; delegates from thirteen countries took part in the ensuing debate. The Report covers the period 1 November 1957 to the end of June 1958 with some more recent developments mentioned briefly in the Preface. (author)

  16. Generalized superradiant assembly for nanophotonic thermal emitters

    Science.gov (United States)

    Mallawaarachchi, Sudaraka; Gunapala, Sarath D.; Stockman, Mark I.; Premaratne, Malin

    2018-03-01

    Superradiance explains the collective enhancement of emission, observed when nanophotonic emitters are arranged within subwavelength proximity and perfect symmetry. Thermal superradiant emitter assemblies with variable photon far-field coupling rates are known to be capable of outperforming their conventional, nonsuperradiant counterparts. However, due to the inability to account for assemblies comprising emitters with various materials and dimensional configurations, existing thermal superradiant models are inadequate and incongruent. In this paper, a generalized thermal superradiant assembly for nanophotonic emitters is developed from first principles. Spectral analysis shows that not only does the proposed model outperform existing models in power delivery, but also portrays unforeseen and startling characteristics during emission. These electromagnetically induced transparency like (EIT-like) and superscattering-like characteristics are reported here for a superradiant assembly, and the effects escalate as the emitters become increasingly disparate. The fact that the EIT-like characteristics are in close agreement with a recent experimental observation involving the superradiant decay of qubits strongly bolsters the validity of the proposed model.

  17. Proceedings of the Twenty-Eighth General Assembly Beijing 2012

    Science.gov (United States)

    Montmerle, Thierry

    2015-09-01

    Preface; 1. Inaugural ceremony; 2. Twenty-eighth General Assembly business sessions; 3. Closing ceremony; 4. Resolutions; 5. Report of Executive Committee, 2009-2012; 6. Reports on Division, Commission, and Working Group meetings; 7. Statutes, bye-laws, and working rules; 8. New members admitted at the General Assembly; 9. Divisions and their Commissions.

  18. Chapter II: Twenty Eighth General Assembly Business Sessions

    Science.gov (United States)

    Williams, Robert

    2015-08-01

    The President of the IAU, Prof. Robert Williams, welcomed the delegates and members to this first business session of the General Assembly. The President invited the General Secretary, Dr. Ian Corbett, to start the business session.

  19. 75 FR 67770 - General Motors Company, Formerly Known as General Motors Corporation, Orion Assembly Plant...

    Science.gov (United States)

    2010-11-03

    ..., Formerly Known as General Motors Corporation, Orion Assembly Plant, Including On-Site Leased Workers From Aerotek Automotive, Ryder and Premier Manufacturing Support Services, Lake Orion, MI; Amended... of General Motors Company, formerly known as General Motors Corporation, Orion Assembly Plant, Lake...

  20. Report from UNSCEAR to the United Nations General Assembly

    International Nuclear Information System (INIS)

    2001-01-01

    Over the past few years, the United Nations Scientific Committee on the Effects of Atomic Radiation (UNSCEAR) has undertaken a broad review of the sources and effects of ionizing radiation. The result of this work has presented for the general reader in the 2000 Report to the General Assembly. This report with the supporting scientific annexes, which are aimed at the general scientific community, was published as 'Sources and Effects of Ionizing Radiation, United Nations Scientific Committee on the Effects of Atomic Radiation 2000 report to the General Assembly, with scientific annexes'

  1. Generalized Modeling of the Human Lower Limb Assembly

    Science.gov (United States)

    Cofaru, Ioana; Huzu, Iulia

    2014-11-01

    The main reason for creating a generalized assembly of the main bones of the lower human member is to create the premises of realizing a biomechanic assisted study which could be used for the study of the high range of varieties of pathologies that exist at this level. Starting from 3D CAD models of the main bones of the lower human member, which were realized in previous researches, in this study a generalized assembly system was developed, system in which are highlighted both the situation of an healthy subject and the situation of the situation of a subject affected by axial deviations. In order to achieve these purpose reference systems were created, systems that are in accordance with the mechanical axes and the anatomic axes of the lower member, which were later generally assembled in a manner that provides an easy customization option

  2. 75 FR 54388 - General Motors Company Formerly Known as General Motors Corporation, Orion Assembly Plant...

    Science.gov (United States)

    2010-09-07

    ... Formerly Known as General Motors Corporation, Orion Assembly Plant Including On-Site Leased Workers From Aerotek Automotive Lake Orion, MI; Amended Certification Regarding Eligibility To Apply for Worker... Motors Corporation, Orion Assembly Plant, Lake Orion, Michigan. The notice was published in the Federal...

  3. Building superlattices from individual nanoparticles via template-confined DNA-mediated assembly

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Qing-Yuan; Mason, Jarad A.; Li, Zhongyang; Zhou, Wenjie; O’Brien, Matthew N.; Brown, Keith A.; Jones, Matthew R.; Butun, Serkan; Lee, Byeongdu; Dravid, Vinayak P.; Aydin, Koray; Mirkin, Chad A.

    2018-01-18

    DNA programmable assembly has been combined with top-down lithography to construct superlattices of discrete, reconfigurable nanoparticle architectures on a gold surface over large areas. Specifically, individual colloidal plasmonic nanoparticles with different shapes and sizes are assembled with ‘locked” nucleic acids in polymer pores into oriented architectures that feature tunable arrangements and independently controllable distances at both nanometer and micrometer length scales. These structures, which would be difficult to construct via other common assembly methods, provide a platform to systematically study and control light-matter interactions in nanoparticle-based optical materials. The generality and potential of this approach is explored by identifying a broadband absorber with a solvent polarity response that allows dynamic tuning of the wavelength response and amplitude of visible light absorption.

  4. Building superlattices from individual nanoparticles via template-confined DNA-mediated assembly

    Science.gov (United States)

    Lin, Qing-Yuan; Mason, Jarad A.; Li, Zhongyang; Zhou, Wenjie; O’Brien, Matthew N.; Brown, Keith A.; Jones, Matthew R.; Butun, Serkan; Lee, Byeongdu; Dravid, Vinayak P.; Aydin, Koray; Mirkin, Chad A.

    2018-02-01

    DNA programmable assembly has been combined with top-down lithography to construct superlattices of discrete, reconfigurable nanoparticle architectures on a gold surface over large areas. Specifically, the assembly of individual colloidal plasmonic nanoparticles with different shapes and sizes is controlled by oligonucleotides containing “locked” nucleic acids and confined environments provided by polymer pores to yield oriented architectures that feature tunable arrangements and independently controllable distances at both nanometer- and micrometer-length scales. These structures, which would be difficult to construct by other common assembly methods, provide a platform to systematically study and control light-matter interactions in nanoparticle-based optical materials. The generality and potential of this approach are explored by identifying a broadband absorber with a solvent polarity response that allows dynamic tuning of visible light absorption.

  5. 24 April 2018: Ordinary General Assembly of the Staff Association!

    CERN Multimedia

    Staff Association

    2018-01-01

    In the first semester of each year, the Staff Association (SA) invites its members to attend and participate in the Ordinary General Assembly (OGA). This year the OGA will be held on Tuesday, 24 April 2018 from 14.00 to 16.00, Main Auditorium, Meyrin (500-1-001). During the Ordinary General Assembly, the activity and financial reports of the SA are presented and submitted for approval to the members. This is the occasion to get a global view on the activities of the SA, its management, and an opportunity to express your opinion, particularly by taking part in votes. Other items are listed on the agenda, as proposed by the Staff Council. Who can vote? Ordinary members (MPE) of the SA can take part in all votes. Associated members (MPA) of the SA and/or affiliated pensioners have a right to vote on those topics that are of direct interest to them. Who can give their opinion, and how? The Ordinary General Assembly is also the opportunity for members of the SA to express themselves through the addition of discus...

  6. 24 April 2018: Ordinary General Assembly of the Staff Association!

    CERN Multimedia

    Staff Association

    2018-01-01

    In the first semester of each year, the Staff Association (SA) invites its members to attend and participate in the Ordinary General Assembly (OGA). This year the OGA will be held on Thursday, 24 April 2018 from 14.00 to 16.00, Main Auditorium, Meyrin (500-1-001). During the Ordinary General Assembly, the activity and financial reports of the SA are presented and submitted for approval to the members. This is the occasion to get a global view on the activities of the SA, its management, and an opportunity to express your opinion, particularly by taking part in votes. Other items are listed on the agenda, as proposed by the Staff Council. Who can vote? Ordinary members (MPE) of the SA can take part in all votes. Associated members (MPA) of the SA and/or affiliated pensioners have a right to vote on those topics that are of direct interest to them. Who can give their opinion, and how? The Ordinary General Assembly is also the opportunity for members of the SA to express themselves through the addition of disc...

  7. Food Web Assembly Rules for Generalized Lotka-Volterra Equations.

    Directory of Open Access Journals (Sweden)

    Jan O Haerter

    2016-02-01

    Full Text Available In food webs, many interacting species coexist despite the restrictions imposed by the competitive exclusion principle and apparent competition. For the generalized Lotka-Volterra equations, sustainable coexistence necessitates nonzero determinant of the interaction matrix. Here we show that this requirement is equivalent to demanding that each species be part of a non-overlapping pairing, which substantially constrains the food web structure. We demonstrate that a stable food web can always be obtained if a non-overlapping pairing exists. If it does not, the matrix rank can be used to quantify the lack of niches, corresponding to unpaired species. For the species richness at each trophic level, we derive the food web assembly rules, which specify sustainable combinations. In neighboring levels, these rules allow the higher level to avert competitive exclusion at the lower, thereby incorporating apparent competition. In agreement with data, the assembly rules predict high species numbers at intermediate levels and thinning at the top and bottom. Using comprehensive food web data, we demonstrate how omnivores or parasites with hosts at multiple trophic levels can loosen the constraints and help obtain coexistence in food webs. Hence, omnivory may be the glue that keeps communities intact even under extinction or ecological release of species.

  8. Food Web Assembly Rules for Generalized Lotka-Volterra Equations.

    Science.gov (United States)

    Haerter, Jan O; Mitarai, Namiko; Sneppen, Kim

    2016-02-01

    In food webs, many interacting species coexist despite the restrictions imposed by the competitive exclusion principle and apparent competition. For the generalized Lotka-Volterra equations, sustainable coexistence necessitates nonzero determinant of the interaction matrix. Here we show that this requirement is equivalent to demanding that each species be part of a non-overlapping pairing, which substantially constrains the food web structure. We demonstrate that a stable food web can always be obtained if a non-overlapping pairing exists. If it does not, the matrix rank can be used to quantify the lack of niches, corresponding to unpaired species. For the species richness at each trophic level, we derive the food web assembly rules, which specify sustainable combinations. In neighboring levels, these rules allow the higher level to avert competitive exclusion at the lower, thereby incorporating apparent competition. In agreement with data, the assembly rules predict high species numbers at intermediate levels and thinning at the top and bottom. Using comprehensive food web data, we demonstrate how omnivores or parasites with hosts at multiple trophic levels can loosen the constraints and help obtain coexistence in food webs. Hence, omnivory may be the glue that keeps communities intact even under extinction or ecological release of species.

  9. Physical characteristics of GE [General Electric] BWR [boiling-water reactor] fuel assemblies

    International Nuclear Information System (INIS)

    Moore, R.S.; Notz, K.J.

    1989-06-01

    The physical characteristics of fuel assemblies manufactured by the General Electric Company for boiling-water reactors are classified and described. The classification into assembly types is based on the GE reactor product line, the Characteristics Data Base (CDB) assembly class, and the GE fuel design. Thirty production assembly types are identified. Detailed physical data are presented for each assembly type in an appendix. Descriptions of special (nonstandard) fuels are also reported. 52 refs., 1 fig., 6 tabs

  10. The United Nations General Assembly and Disarmament 1987

    International Nuclear Information System (INIS)

    1988-01-01

    The report offers a summary of the proposals made and action taken on disarmament issues by the Assembly at its forty-second regular session. It is published in the framework of the World Disarmament Campaign, which was launched by a unanimous decision of the Assembly in 1982 to inform, to educate and to generate public understanding and support for the objectives of the United Nations in the field of disarmament

  11. Food Web Assembly Rules for Generalized Lotka-Volterra Equations

    DEFF Research Database (Denmark)

    Härter, Jan Olaf Mirko; Mitarai, Namiko; Sneppen, Kim

    2016-01-01

    the lack of niches, corresponding to unpaired species. For the species richness at each trophic level, we derive the food web assembly rules, which specify sustainable combinations. In neighboring levels, these rules allow the higher level to avert competitive exclusion at the lower, thereby incorporating...

  12. Detection of Alzheimer's amyloid beta aggregation by capturing molecular trails of individual assemblies

    International Nuclear Information System (INIS)

    Vestergaard, Mun'delanji; Hamada, Tsutomu; Saito, Masato; Yajima, Yoshifumi; Kudou, Monotori; Tamiya, Eiichi; Takagi, Masahiro

    2008-01-01

    Assembly of Amyloid beta (Aβ) peptides, in particular Aβ-42 is central to the formation of the amyloid plaques associated with neuro-pathologies such as Alzheimer's disease (AD). Molecular assembly of individual Aβ-42 species was observed using a simple fluorescence microscope. From the molecular movements (aka Brownian motion) of the individual peptide assemblies, we calculated a temporal evolution of the hydrodynamic radius (R H ) of the peptide at physiological temperature and pH. The results clearly show a direct relationship between R H of Aβ-42 and incubation period, corresponding to the previously reported peptide's aggregation kinetics. The data correlates highly with in solution-based label-free electrochemical detection of the peptide's aggregation, and Aβ-42 deposited on a solid surface and analysed using atomic force microscopy (AFM). To the best of our knowledge, this is the first analysis and characterisation of Aβ aggregation based on capturing molecular trails of individual assemblies. The technique enables both real-time observation and a semi-quantitative distribution profile of the various stages of Aβ assembly, at microM peptide concentration. Our method is a promising candidate for real-time observation and analysis of the effect of other pathologically-relevant molecules such as metal ions on pathways to Aβ oligomerisation and aggregation. The method is also a promising screening tool for AD therapeutics that target Aβ assembly.

  13. Evaluation and comparison of predictive individual-level general surrogates.

    Science.gov (United States)

    Gabriel, Erin E; Sachs, Michael C; Halloran, M Elizabeth

    2018-07-01

    An intermediate response measure that accurately predicts efficacy in a new setting at the individual level could be used both for prediction and personalized medical decisions. In this article, we define a predictive individual-level general surrogate (PIGS), which is an individual-level intermediate response that can be used to accurately predict individual efficacy in a new setting. While methods for evaluating trial-level general surrogates, which are predictors of trial-level efficacy, have been developed previously, few, if any, methods have been developed to evaluate individual-level general surrogates, and no methods have formalized the use of cross-validation to quantify the expected prediction error. Our proposed method uses existing methods of individual-level surrogate evaluation within a given clinical trial setting in combination with cross-validation over a set of clinical trials to evaluate surrogate quality and to estimate the absolute prediction error that is expected in a new trial setting when using a PIGS. Simulations show that our method performs well across a variety of scenarios. We use our method to evaluate and to compare candidate individual-level general surrogates over a set of multi-national trials of a pentavalent rotavirus vaccine.

  14. 24 April 2018: Ordinary General Assembly of the Staff Association!

    CERN Multimedia

    Staff Association

    2018-01-01

    Conformément aux statuts de l’Association du personnel, une Assemblée générale ordinaire est organisée une fois par année (article IV.2.1). Projet d’ordre du jour : Adoption de l’ordre du jour; Approbation du procès-verbal de l’Assemblée générale du 29 juin 2017; Présentation et approbation du rapport d’activité 2017; Présentation et approbation du rapport financier 2017; Présentation et approbation du rapport des vérification aux comptes; Programme de travail 2018; Présentation et approbation du budget 2018; Approbation du taux de cotisation 2019; Election des membres de la commission électorale; Election des vérificateurs aux comptes; Présentation et approbation du principe de création d’une fondation pour reprendre les activit&am...

  15. Individual and organizational predictors of depression in general practitioners.

    OpenAIRE

    Firth-Cozens, J

    1998-01-01

    BACKGROUND: High levels of stress and depression are seen in both general practitioners (GPs) and hospital doctors, and this has implications for patient care. It is therefore important to discover the individual and organizational causes of elevated symptoms so they can be tackled. AIM: To discover the relative importance of individual characteristics measured 10 years earlier compared with current organizational stressors in predicting depression in GPs. METHOD: Longitudinal questionnaire s...

  16. Iowa House of Representatives District Boundaries for 2013 - 2022_85th - 89th General Assemblies

    Data.gov (United States)

    Iowa State University GIS Support and Research Facility — Iowa Legislative House district boundaries, enacted April 19, 2011, effective beginning with the elections in 2012 for the 85th General Assembly. The districts will...

  17. Individual species affect plant traits structure in their surroundings: evidence of functional mechanisms of assembly.

    Science.gov (United States)

    Chacón-Labella, Julia; de la Cruz, Marcelino; Pescador, David S; Escudero, Adrián

    2016-04-01

    Evaluating community assembly through the use of functional traits is a promising tool for testing predictions arising from Niche and Coexistence theories. Although interactions among neighboring species and their inter-specific differences are known drivers of coexistence with a strong spatial signal, assessing the role of individual species on the functional structure of the community at different spatial scales remains a challenge. Here, we ask whether individual species exert a measurable effect on the spatial organization of different functional traits in local assemblages. We first propose and compute two functions that describe different aspects of functional trait organization around individual species at multiple scales: individual weighted mean area relationship and individual functional diversity area relationship. Secondly, we develop a conceptual model on the relationship and simultaneous variation of these two metrics, providing five alternative scenarios in response to the ability of some target species to modify its neighbor environment and the possible assembly mechanisms involved. Our results show that some species influence the spatial structure of specific functional traits, but their effects were always restricted to the finest spatial scales. In the basis of our conceptual model, the observed patterns point to two main mechanisms driving the functional structure of the community at the fine scale, "biotic" filtering meditated by individual species and resource partitioning driven by indirect facilitation rather than by competitive mechanisms.

  18. Technical products for radiation shielding. Shield assembled from lead blocks for radiation protection. General technical requirements

    International Nuclear Information System (INIS)

    1981-01-01

    The object of this standard description is the general technological requirements of 50 and 100 mm thick radiation protection shields assembled from lead blocks. The standard contains the definitions, types, parameters and dimensions of shields, their technical and acceptance criteria with testing methods, tagging, packaging, transportation and storage requirements, producer's liability. Some illustrated assembling examples, preferred parameters and dosimetry methods for shield inspection are given. (R.P.)

  19. Proceedings of the General Assembly 2016 on solar heat

    International Nuclear Information System (INIS)

    Gibert, Francois; Porcheyre, Edwige; Mouvet, Celine; Humbert, Adrien; SEGUIS, Anne-Sophie; Manteau, Olivier; Roland, Joel; LAPLAGNE, Valerie; Chavagnac, Jean-Francois; Godin, Olivier; Long, Guy; Tamri, Laila; Parrens, Gael; Neveux, Guillaume; Fourmessol, Thomas; Cholin, Xavier; Mugnier, Daniel; Berthomieu, Nadine; Loyen, Richard; Benabdelkarim, Mohamed; Daclin, Julien; Dejonghe, Joseph; Bealu, Christophe; Alsafar, Thaer; Crozier, Benoit; Ramonet, Corinne; Meriau, Jean-Paul

    2016-10-01

    After an opening speech, a first set of contributions addressed the impact of the evolutions of building energetic regulations on the solar heat market for new buildings: towards positive energy and low carbon buildings with the Energy-Carbon experimentation; results of the RT2012 study on technical and economic solutions of solar hot water; opportunities and constraints of the integration of solar energy into projects. The second set addressed new opportunities in terms of technical innovations and services for connected thermal solar: a harmonised framework proposed by industries for individual equipment; returns on experience from industrials; impact of connected solar on the operator's profession. The third session discussed perspectives for the French sector: synthesis of a prospective study on the economic and social potential of the solar sector in France; a new MOOC on energy labelling of solar heating and water heaters. The fourth session presented some recent advances dealing with SOCOL for a collective, performing and sustainable production of solar heat: new SOCOL tools; a new design and sizing software; integration of the SOCOL quality approach in the 2017 Heat Fund. The fifth set of contributions addressed the issue of self-consumption and its possible dynamic impact on the production of solar electrons and calories: approach to burden management and reduction of CO_2 emissions; innovation at the service of photovoltaic performance by using phase-change materials; the example of the future House of the Ile-de-France in Paris. The last session addressed local dynamics noticed in relationship with the use of solar heat: the SOLTHERM plan in Wallonia; local initiatives in the farming sector; a large project by Lyon Habitat within the frame of an ADEME program (large installations). A closing speech proposes a synthesis on how to find growth again and reach the national ambitious objective for solar heat by 2023

  20. General Assembly

    Science.gov (United States)

    Tribunal Children Civil Society Corruption Cyber-crime Democracy Disabilities Drugs Education and Culture session Cochabamba, Bolivia, June 2012 Forty First regular session San Salvador, El Salvador, June 2011 States of America - November 1980 Ninth regular session - La Paz, Bolivia - October 1979 Eighth regular

  1. Self-Assembled Student Interactions in Undergraduate General Chemistry Clicker Classrooms

    Science.gov (United States)

    MacArthur, James R.; Jones, Loretta

    2013-01-01

    Student interviews, focus groups, and classroom observations were used in an exploratory study of the nature of student interactions in a large (300+ students) general chemistry course taught with clickers. These data suggest that students are self-assembling their learning environment: choosing ways in which to interact with one another during…

  2. Statement to the fifty-fifth session of the United Nations General Assembly

    International Nuclear Information System (INIS)

    ElBaradei, M.

    2000-01-01

    In his statement to the fifty-fifth session of the United Nations General Assembly, the Director General of the IAEA briefly presented the three fundamental functions of the IAEA, namely: its role as a catalyst for the development and transfer of peaceful nuclear technologies, the efforts to prevent the proliferation of nuclear weapons and move towards nuclear disarmament, and the work to build and maintain a global nuclear safety regime

  3. Individual and organizational predictors of depression in general practitioners.

    Science.gov (United States)

    Firth-Cozens, J

    1998-10-01

    High levels of stress and depression are seen in both general practitioners (GPs) and hospital doctors, and this has implications for patient care. It is therefore important to discover the individual and organizational causes of elevated symptoms so they can be tackled. To discover the relative importance of individual characteristics measured 10 years earlier compared with current organizational stressors in predicting depression in GPs. Longitudinal questionnaire study, using data from those of the original cohort of 318 medical students who are now GPs (n = 131), considering perceptions of current stressors and comparing through regression analyses the relative strength of early personality and mood with current organizational factors of sleep, hours worked, and practice size in predicting current depression levels. There were 22 (17%) stressors scoring above threshold for depression. Relationships with senior doctors and patients are the main reported stressors, followed by making mistakes and conflict of career with personal life. The predictors of symptom levels varied for men and women. In men, depression and self-criticism as students, and current sleep levels; and in women, sibling rivalry and current alcohol use, were the main predictors: in men, 27% of the variance was accounted for by early dispositional factors alone compared with 14% in women. A model is suggested linking sleep loss with workplace stressors, self-critical cognitions, and depression. Interventions can be made throughout training, targeting self-criticism and recognizing early depression, while later addressing the organizational stressors, particularly work relationships and sleep patterns.

  4. 29th June 2017 – Ordinary General Assembly of the Staff Association!

    CERN Document Server

    Staff Association

    2017-01-01

    In the first semester of each year, the Staff Association (SA) invites its members to attend and participate in the Ordinary General Assembly (OGA). This year the OGA will be held on Thursday, 29 June 2017 from 15.30 to 17.30, Main Auditorium, Meyrin (500-1-001). During the Ordinary General Assembly, the activity and financial reports of the SA are presented and submitted for approval to the members. This is the occasion to get a global view on the activities of the SA, its management, and an opportunity to express your opinion, particularly by taking part in votes. Other items are listed on the agenda, as proposed by the Staff Council. Who can vote? Ordinary members (MPE) of the SA can take part in all votes. Associated members (MPA) of the SA and/or affiliated pensioners have a right to vote on those topics that are of direct interest to them. Who can give their opinion, and how? The Ordinary General Assembly is also the opportunity for members of the SA to express themselves through the addition of disc...

  5. The precise self-assembly of individual carbon nanotubes using magnetic capturing and fluidic alignment

    Energy Technology Data Exchange (ETDEWEB)

    Shim, Joon S; Rust, Michael J; Do, Jaephil; Ahn, Chong H [Department of Electrical and Computer Engineering, Microsystems and BioMEMS Laboratory, University of Cincinnati, Cincinnati, OH 45221 (United States); Yun, Yeo-Heung; Schulz, Mark J [Department of Mechanical Engineering, University of Cincinnati, 45221 (United States); Shanov, Vesselin, E-mail: chong.ahn@uc.ed [Department of Chemical and Materials Engineering, University of Cincinnati, 45221 (United States)

    2009-08-12

    A new method for the self-assembly of a carbon nanotube (CNT) using magnetic capturing and fluidic alignment has been developed and characterized in this work. In this new method, the residual iron (Fe) catalyst positioned at one end of the CNT was utilized as a self-assembly driver to attract and position the CNT, while the assembled CNT was aligned by the shear force induced from the fluid flow through the assembly channel. The self-assembly procedures were successfully developed and the electrical properties of the assembled multi-walled carbon nanotube (MWNT) and single-walled carbon nanotube (SWNT) were fully characterized. The new assembly method developed in this work shows its feasibility for the precise self-assembly of parallel CNTs for electronic devices and nanobiosensors.

  6. IAEA Director General addresses efforts to protect against nuclear terrorism before UN General Assembly

    International Nuclear Information System (INIS)

    2001-01-01

    The Director General of the IAEA, Dr. Mohamed ElBaradei, said October 22 in New York that the September 11 attacks on the United States had been a 'wake-up call' to everyone that more can and must be done to bolster security as an integral part of the management of national nuclear programmes. In support of that effort, he had already initiated a thorough review of all IAEA activities and programmes relevant to preventing acts of terrorism involving nuclear and other radioactive materials. 'The Agency is engaged in a variety of activities relevant to combating nuclear terrorism -- including programmes to ensure physical security, to help prevent and respond to illicit trafficking of nuclear material and other radioactive sources, to promote the safety of nuclear facilities, to safeguard nuclear material against non-peaceful uses, and to respond to emergencies', he said. Each of these programmes was being reviewed in-depth to identify additional measures that need to be taken in the light of recent events. In particular, expanding the scope and reach of many of the Agency's security and safety services was being considered. Also, existing conventions and guidelines, including the Convention on the Physical Protection of Nuclear Material, would be examined to ensure that they were comprehensive and effective, and efforts would be redoubled to ensure their universal application. The full text of the Director General's speech is available on the IAEA Web site www.iaea.org/worldatom/Press/Statements

  7. ALL MEMBERS AND BENEFICIARIES OF THE PENSION FUND ARE INVITED TO ATTEND THE ANNUAL GENERAL ASSEMBLY

    CERN Multimedia

    2000-01-01

    Annual General Assembly to be held in the CERN Auditorium on Wednesday 4 October 2000 at 14.30 hrs The Agenda comprises: 1. Opening Remarks: - P. Levaux 2. The Swiss provident system: - C. Cuénoud recent trends 3. Annual Report 1999: - C. Cuénoud Presentation and results Copies of the Report are available from divisional secretariats. 4. Pension Fund’s investment policy and performance: - G. Maurin 5. Questions from members and beneficiaries Persons wishing to ask questions are encouraged to submit them, where possible, in writing in advance, addressed to Mr C. Cuénoud, Administrator of the Fund. 5. Conclusions P. Levaux As usual, participants are invited to drinks after the assembly. NB The minutes of the 1999 General Assembly are available from the Administration of the Fund (tel.(+4122)767 9194; e-mail Graziella.Praire@cern.ch) SOME ASPECTS OF THE FUND’S ACTIVITIES IN 1999 The Governing Board (at 31 December 1999) Members Appointed by C. Bovet (Alternate: E. Chiaveri...

  8. Confined electron assemblies in intense electric and magnetic fields and a generalization of Emden's equation

    International Nuclear Information System (INIS)

    March, N.H.

    2003-09-01

    The Feynman propagator, and its parallel in statistical mechanics, namely the canonical density matrix, are first used to treat both homogeneous and confined electron assemblies in the presence of a static electric field of arbitrary strength. The models are relevant to plasmas having variable electron density and degeneracy. The second topic concerns atomic ions in intense magnetic fields. Semiclassical theory is here applied, non-relativistic and relativistic approximations being invoked. Both treatments are shown to be embraced by a generalization of Emden's equation. (author)

  9. Lathe Operator. Coordinator's Guide. Individualized Study Guide. General Metal Trades.

    Science.gov (United States)

    East Texas State Univ., Commerce. Occupational Curriculum Lab.

    This guide provides information to enable coordinators to direct learning activities for students using an individualized study guide on operating a lathe. The study material is designed for students enrolled in cooperative part-time training and employed, or desiring to be employed, as lathe operators. Contents include a sample progress chart,…

  10. Generalization of Individual Differences in Second Language Learning

    Science.gov (United States)

    Anjum, Amber Nasreen; Al-Othmany, Dheya Shujaa; Hussain, Ahmad

    2015-01-01

    This commentary is based on the analyses of the participants' responses provided in written form while filling the questionnaires. The purpose of the study was to identify and analyze factors in individuals' experiences about second language acquisition. The study was conducted through a research questionnaire. The questions were designed for…

  11. Structure Assembly by a Heterogeneous Team of Robots Using State Estimation, Generalized Joints, and Mobile Parallel Manipulators

    Science.gov (United States)

    Komendera, Erik E.; Adhikari, Shaurav; Glassner, Samantha; Kishen, Ashwin; Quartaro, Amy

    2017-01-01

    Autonomous robotic assembly by mobile field robots has seen significant advances in recent decades, yet practicality remains elusive. Identified challenges include better use of state estimation to and reasoning with uncertainty, spreading out tasks to specialized robots, and implementing representative joining methods. This paper proposes replacing 1) self-correcting mechanical linkages with generalized joints for improved applicability, 2) assembly serial manipulators with parallel manipulators for higher precision and stability, and 3) all-in-one robots with a heterogeneous team of specialized robots for agent simplicity. This paper then describes a general assembly algorithm utilizing state estimation. Finally, these concepts are tested in the context of solar array assembly, requiring a team of robots to assemble, bond, and deploy a set of solar panel mockups to a backbone truss to an accuracy not built into the parts. This paper presents the results of these tests.

  12. Statement to the 47th session of the United Nations General Assembly

    International Nuclear Information System (INIS)

    Blix, H.

    1993-01-01

    IAEA Director General, Hans Blix, in his statement to the 47th session of the United Nations General Assembly on 21 October 1992, reminded that 1992 marks the fiftieth anniversary of controlled nuclear fission and the thirty-fifth anniversary of the IAEA. He specially commented on the various measures taken during the past year to strengthen the IAEA's safeguards system as a part of the challenge to reduce the risk of a further spread of nuclear weapons. He also discussed the role of the IAEA in the fields of nuclear safety, nuclear waste, transfer of technology and assistance to developing countries and the financing and management of the Agency within the UN system

  13. ABOUT SOME DYNAMIC CHARACTERISTICS OF INDIVIDUAL METEOREACTIONS: GENERAL ASPECTS

    Directory of Open Access Journals (Sweden)

    E. G. Zhuravishkina

    2015-01-01

    Full Text Available The interaction of organism and environment is essential for human existence, and in the natural impact the main are solar-terrestrial relations. Influence of solar activity is carried out directly through the electro-magnetic field, and indirectly, through the effects of meteorological factors. All people are meteo-sensitive. The degree of sensitivity depends of health, age and type of the estimated impact factor, and environmental features of human location. The basic laws of individual meteo-helio-reactions of human psychophysiological indicators at an early and mature age stages are determined. These researches were carried out with a single cycle of observation, but the same patterns and features of meteo-helio-influence with repeated observation are poorly understood. Article is devoted to dynamic characteristics of individual meteo-reactions of healthy people and patients with cardiovascular disease in adulthood. The study involved shift workers Siberia. Studied the effect of changes in air temperature and atmospheric pressure on the dynamics of blood pressure and heart rate in a two cycles of observation, the dynamics of adaptation levels in cycles is examined. The study revealed the existence of both conserved and different parameters for dynamic monitoring of human meteo-reactions. That allows to put forward a hypothesis that meteo-adaptation it is not a reaction to the current external impact, but the result of the realization of adaptation program, already existing in the body, in specific conditions.

  14. De novo transcriptome assembly and positive selection analysis of an individual deep-sea fish.

    Science.gov (United States)

    Lan, Yi; Sun, Jin; Xu, Ting; Chen, Chong; Tian, Renmao; Qiu, Jian-Wen; Qian, Pei-Yuan

    2018-05-24

    High hydrostatic pressure and low temperatures make the deep sea a harsh environment for life forms. Actin organization and microtubules assembly, which are essential for intracellular transport and cell motility, can be disrupted by high hydrostatic pressure. High hydrostatic pressure can also damage DNA. Nucleic acids exposed to low temperatures can form secondary structures that hinder genetic information processing. To study how deep-sea creatures adapt to such a hostile environment, one of the most straightforward ways is to sequence and compare their genes with those of their shallow-water relatives. We captured an individual of the fish species Aldrovandia affinis, which is a typical deep-sea inhabitant, from the Okinawa Trough at a depth of 1550 m using a remotely operated vehicle (ROV). We sequenced its transcriptome and analyzed its molecular adaptation. We obtained 27,633 protein coding sequences using an Illumina platform and compared them with those of several shallow-water fish species. Analysis of 4918 single-copy orthologs identified 138 positively selected genes in A. affinis, including genes involved in microtubule regulation. Particularly, functional domains related to cold shock as well as DNA repair are exposed to positive selection pressure in both deep-sea fish and hadal amphipod. Overall, we have identified a set of positively selected genes related to cytoskeleton structures, DNA repair and genetic information processing, which shed light on molecular adaptation to the deep sea. These results suggest that amino acid substitutions of these positively selected genes may contribute crucially to the adaptation of deep-sea animals. Additionally, we provide a high-quality transcriptome of a deep-sea fish for future deep-sea studies.

  15. Geoscience Information for Teachers (GIFT) Workshops at the European Geoscience Union General Assembly

    Science.gov (United States)

    Macko, S. A.; Arnold, E. M.; Laj, C. E.; Barnikel, F.; Berenguer, J. L.; Schwarz, A.; Cifelli, F.; Smith, P.; Funiciello, F.; Summesberger, H.

    2017-12-01

    GIFT workshops are teacher enhancement workshops organized by the EGU Committee on Education and held in conjunction with the EGU annual General Assembly. The program focuses on a different general theme each year. Past themes have included, for example, "Energy and Sustainable Development", "The Carbon Cycle", "Mineral Resources", "The Solar System And Beyond" and "The Mediterranean". These workshops combine scientific presentations on current research in Earth and Space Sciences, given by prominent scientists attending EGU General Assemblies, with hands-on, inquiry-based activities that can be used by the teachers in their classrooms to explain related scientific principles or topics. Participating teachers are also invited to present their own classroom activities to their colleagues, regardless of the scientific topic. The main objective of these workshops is to communicate first-hand scientific information to teachers in primary and secondary schools, significantly shortening the time between discovery and textbook. The GIFT workshop provides the teachers with materials that can be directly incorporated into their classroom, as well as those of their colleagues at home institutions. In addition, the full immersion of science teachers in a truly scientific context (EGU General Assemblies) and the direct contact with leading geoscientists stimulates curiosity towards research that the teachers can transmit to their pupils. In addition to their scientific content, the GIFT workshops are of high societal value. The value of bringing teachers from many nations together includes the potential for networking and collaborations, the sharing of experiences and an awareness of science education as it is presented in other countries. Since 2003, the EGU GIFT workshops have brought together more than 700 teachers from more than 25 nations. At all previous EGU GIFT workshops teachers mingled with others from outside their own country and informally interacted with the

  16. Geoscience Information for Teachers (GIFT) Workshops at the European Geoscience Union General Assembly

    Science.gov (United States)

    Arnold, Eve; Barnikel, Friedrich; Berenguer, Jean-Luc; Cifelli, Francesca; Funiciello, Francesca; Laj, Carlo; Macko, Stephen; Schwarz, Annegret; Smith, Phil; Summesberger, Herbert

    2016-04-01

    GIFT workshops are a two-and-a-half-day teacher enhancement workshops organized by the EGU Committee on Education and held in conjunction with the EGU annual General Assembly. The program of each workshop focuses on a different general theme each year. Past themes have included, for example, "Mineral Resources", "Our changing Planet", "Natural Hazards", "Water", "Evolution and Biodiversity" and "Energy and Sustainable Development". These workshops combine scientific presentations on current research in the Earth and Space Sciences, given by prominent scientists attending EGU General Assemblies, with hands-on, inquiry-based activities that can be used by the teachers in their classrooms to explain related scientific principles or topics. Participating teachers are also invited to present their own classroom activities to their colleagues, even when not directly related to the current program. The main objective of these workshops is to communicate first-hand scientific information to teachers in primary and secondary schools, significantly shortening the time between discovery and textbook. The GIFT workshop provides the teachers with materials that can be directly incorporated into their classroom, as well as those of their colleagues at home institutions. In addition, the full immersion of science teachers in a truly scientific context (EGU General Assemblies) and the direct contact with leading geoscientists stimulates curiosity towards research that the teachers can transmit to their pupils. In addition to their scientific content, the GIFT workshops are of high societal value. The value of bringing teachers from many nations together includes the potential for networking and collaborations, the sharing of experiences and an awareness of science education as it is presented in other countries. Since 2003, the EGU GIFT workshops have brought together more than 700 teachers from more than 25 nations. At all previous EGU GIFT workshops teachers mingled with others

  17. Protein dynamics during presynaptic complex assembly on individual ssDNA molecules

    OpenAIRE

    Gibb, Bryan; Ye, Ling F.; Kwon, YoungHo; Niu, Hengyao; Sung, Patrick; Greene, Eric C.

    2014-01-01

    Homologous recombination is a conserved pathway for repairing double?stranded breaks, which are processed to yield single?stranded DNA overhangs that serve as platforms for presynaptic complex assembly. Here we use single?molecule imaging to reveal the interplay between Saccharomyce cerevisiae RPA, Rad52, and Rad51 during presynaptic complex assembly. We show that Rad52 binds RPA?ssDNA and suppresses RPA turnover, highlighting an unanticipated regulatory influence on protein dynamics. Rad51 b...

  18. Coding of auditory temporal and pitch information by hippocampal individual cells and cell assemblies in the rat.

    Science.gov (United States)

    Sakurai, Y

    2002-01-01

    This study reports how hippocampal individual cells and cell assemblies cooperate for neural coding of pitch and temporal information in memory processes for auditory stimuli. Each rat performed two tasks, one requiring discrimination of auditory pitch (high or low) and the other requiring discrimination of their duration (long or short). Some CA1 and CA3 complex-spike neurons showed task-related differential activity between the high and low tones in only the pitch-discrimination task. However, without exception, neurons which showed task-related differential activity between the long and short tones in the duration-discrimination task were always task-related neurons in the pitch-discrimination task. These results suggest that temporal information (long or short), in contrast to pitch information (high or low), cannot be coded independently by specific neurons. The results also indicate that the two different behavioral tasks cannot be fully differentiated by the task-related single neurons alone and suggest a model of cell-assembly coding of the tasks. Cross-correlation analysis among activities of simultaneously recorded multiple neurons supported the suggested cell-assembly model.Considering those results, this study concludes that dual coding by hippocampal single neurons and cell assemblies is working in memory processing of pitch and temporal information of auditory stimuli. The single neurons encode both auditory pitches and their temporal lengths and the cell assemblies encode types of tasks (contexts or situations) in which the pitch and the temporal information are processed.

  19. Statement to the 54th session of the United Nations General Assembly. United Nations, New York, 4 November 1999

    International Nuclear Information System (INIS)

    ElBaradei, M.

    1999-01-01

    In his Statement to the 54th Session of the United Nations General Assembly (New York, 4 November 1999), the Director General of the IAEA presented some of the major Agency's achievements in fulfilling its mandate as described in the Annual Report of the IAEA for 1998, and also some of the challenges and opportunities that lie ahead

  20. The First Committee of the UN General Assembly and nuclear disarmament: what's new?

    International Nuclear Information System (INIS)

    Sitt, Bernard

    2012-11-01

    The First Committee of the 67. General Assembly of the United Nations closed its discussion on 7 November. It included its traditional dose of disarmament resolutions: fifty-nine were adopted in all, twenty-nine of which required a vote, with the others being passed by consensus. Fifteen of them were specifically about the multiple facets of nuclear disarmament, but contained nothing new on the subject. However, one of these resolutions is particularly worthy of note given its subject and its novelty. This year the Committee adopted a resolution (A/C.1/67/L.19) that decides to convene, on 26 September 2013, a high-level meeting of all States, organised by the president of the General Assembly with the aim of furthering nuclear disarmament. The resolution, sponsored by Indonesia with the support of the Non-Aligned Movement, was passed with 165 votes in favour, none against and 5 abstentions (USA, France, Israel, the UK, and Ukraine). Such a decision is not just a formal exercise, and translates in concrete terms the mounting pressure on the nuclear powers. It establishes a more restrictive diplomatic timetable, whose legitimacy directly derives from the recommendation inscribed in the Millennium Summit Declaration, following the three-day Millennium Summit in September 2000 that brought together heads of State and government. In addition, the resolution is based on another First Committee resolution (A/C.1/67/L.9), which itself is not new, and which deals with the follow-up to the advisory opinion of the International Court of Justice of July 1996 on the legality of the threat or use of nuclear weapons, or, more simply put, on deterrence. Even whilst admitting that the threat or use of nuclear weapons could be legal 'in an extreme circumstance of self-defence, in which the very survival of a State would be at stake', the Court unanimously acknowledged the existence of 'a general obligation of States to pursue in good faith, and bring to a conclusion, negotiations

  1. Geoscience Information for Teachers (GIFT) Workshops of the European Geoscience Union General Assembly

    Science.gov (United States)

    Arnold, Eve; Barnikel, Friedrich; Berenguer, Jean-Luc; Cifelli, Francesca; Funiciello, Francesca; King, Chris; Laj, Carlo; Macko, Stephen; Schwarz, Annegret; Smith, Phil; Summesberger, Herbert

    2017-04-01

    GIFT workshops are a two-and-a-half-day teacher enhancement workshops organized by the EGU Committee on Education and held in conjunction with the EGU annual General Assembly in Vienna, and also elsewhere in the world usually associated with large geoscience conferences. The program of each workshop focuses on a different general theme each year. Past themes have included, for example, "The solar system and beyond", "Mineral Resources", "Our changing Planet", "Natural Hazards", "Water" and "Evolution and Biodiversity". These workshops combine scientific presentations on current research in the Earth and Space Sciences, given by prominent scientists, with hands-on, inquiry-based activities that can be used by the teachers in their classrooms to explain related scientific principles or topics. Participating teachers are also invited to present their own classroom activities to their colleagues, even when not directly related to the current program. The main objective of these workshops is to communicate first-hand scientific information to teachers in primary and secondary schools, significantly shortening the time between discovery and textbook. The GIFT workshop provides the teachers with materials that can be directly incorporated into their classroom, as well as those of their colleagues at home institutions. In addition, the full immersion of science teachers in a truly scientific context (EGU General Assemblies) and the direct contact with leading geoscientists stimulates curiosity towards research that the teachers can transmit to their pupils. In addition to their scientific content, the GIFT workshops are of high societal value. The value of bringing teachers from many nations together includes the potential for networking and collaborations, the sharing of experiences and an awareness of science education as it is presented in other countries. Since 2003, the EGU GIFT workshops have brought together more than 800 teachers from more than 25 nations. At all

  2. The Agency's Annual Report to the General Assembly of the United Nations for the Year 1969-70. Explanatory Note

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1970-11-13

    By Resolution GC(XIV)/RES/268 the General Conference requested the Board of Governors to arrange for the preparation of a supplement to the Board's annual report to the General Conference for 1969-70 which, together with that report, constitutes the Agency's report to the General Assembly of the United Nations for that year. The present document contains the supplement, which deals briefly with some developments in the Agency's work during the period 1 July to 1 October 1970.

  3. The Agency's Annual Report to the General Assembly of the United Nations for the Year 1968-69. Explanatory Note

    International Nuclear Information System (INIS)

    1969-01-01

    By Resolution GC(XIII)/RES/251 the General Conference requested the Board of Governors to arrange for the preparation of a supplement to the Board's annual report to the General Conference for 1968-69 which, together with that report, shall constitute the Agency's report to the General Assembly of the United Nations for that year. The present document contains the supplement, which deals briefly with some developments in the Agency's work during the period 1 July to 1 October 1969.

  4. The Agency's Annual Report to the General Assembly of the United Nations for the Year 1969-70. Explanatory Note

    International Nuclear Information System (INIS)

    1970-01-01

    By Resolution GC(XIV)/RES/268 the General Conference requested the Board of Governors to arrange for the preparation of a supplement to the Board's annual report to the General Conference for 1969-70 which, together with that report, constitutes the Agency's report to the General Assembly of the United Nations for that year. The present document contains the supplement, which deals briefly with some developments in the Agency's work during the period 1 July to 1 October 1970.

  5. Assembly and diploid architecture of an individual human genome via single-molecule technologies.

    Science.gov (United States)

    Pendleton, Matthew; Sebra, Robert; Pang, Andy Wing Chun; Ummat, Ajay; Franzen, Oscar; Rausch, Tobias; Stütz, Adrian M; Stedman, William; Anantharaman, Thomas; Hastie, Alex; Dai, Heng; Fritz, Markus Hsi-Yang; Cao, Han; Cohain, Ariella; Deikus, Gintaras; Durrett, Russell E; Blanchard, Scott C; Altman, Roger; Chin, Chen-Shan; Guo, Yan; Paxinos, Ellen E; Korbel, Jan O; Darnell, Robert B; McCombie, W Richard; Kwok, Pui-Yan; Mason, Christopher E; Schadt, Eric E; Bashir, Ali

    2015-08-01

    We present the first comprehensive analysis of a diploid human genome that combines single-molecule sequencing with single-molecule genome maps. Our hybrid assembly markedly improves upon the contiguity observed from traditional shotgun sequencing approaches, with scaffold N50 values approaching 30 Mb, and we identified complex structural variants (SVs) missed by other high-throughput approaches. Furthermore, by combining Illumina short-read data with long reads, we phased both single-nucleotide variants and SVs, generating haplotypes with over 99% consistency with previous trio-based studies. Our work shows that it is now possible to integrate single-molecule and high-throughput sequence data to generate de novo assembled genomes that approach reference quality.

  6. Tuesday, 24 April 2018: Ordinary General Assembly of the CERN Staff Association!

    CERN Multimedia

    Staff Association

    2018-01-01

    The Ordinary General Assembly is an opportunity for members of the Staff Association, and also non-members, to get an overview of: the Staff Association’s activities over the last year; the financial report and the estimated budget of the Staff Association; the work programme of the current year. This is very interesting for anyone wishing to learn about the work carried out by the CERN Staff Association. 2017 Activities Report Isabelle Mardirossian, Vice-President of the Staff Association, presented the 2017 Activities Report. The main aspects of the report were: a follow-up on the 2015 Five-yearly review: the decisions taken by the Council in December 2015, their implementation, and work that remains to be done; definition and implementation of the Promotion Guide and the 2018 MERIT Guidelines; work carried out within the CERN working groups, the subgroups of the Standing Concertation Committee (SCC) and the Pension Fund, on diverse themes such as religious practice in the workplace, mobility o...

  7. In Situ Hot-Spot Assembly as a General Strategy for Probing Single Biomolecules.

    Science.gov (United States)

    Liu, Huiqiao; Li, Qiang; Li, Mingmin; Ma, Sisi; Liu, Dingbin

    2017-05-02

    Single-molecule detection using surface-enhanced Raman spectroscopy (SERS) has attracted increasing attention in chemical and biomedical analysis. However, it remains a major challenge to probe single biomolecules by means of SERS hot spots owing to the small volume of hot spots and their random distribution on substrates. We here report an in situ hot-spot assembly method as a general strategy for probing single biomolecules. As a proof-of-concept, this proposed strategy was successfully used for the detection of single microRNA-21 (miRNA-21, a potential cancer biomarker) at the single-cell level, showing great capability in differentiating the expression of miRNA-21 in single cancer cells from normal cells. This approach was further extended to single-protein detection. The versatility of the strategy opens an exciting avenue for single-molecule detection of biomarkers of interest and thus holds great promise in a variety of biological and biomedical applications.

  8. Protein dynamics during presynaptic complex assembly on individual ssDNA molecules

    Science.gov (United States)

    Gibb, Bryan; Ye, Ling F.; Kwon, YoungHo; Niu, Hengyao; Sung, Patrick; Greene, Eric C.

    2014-01-01

    Homologous recombination is a conserved pathway for repairing double–stranded breaks, which are processed to yield single–stranded DNA overhangs that serve as platforms for presynaptic complex assembly. Here we use single–molecule imaging to reveal the interplay between Saccharomyce cerevisiae RPA, Rad52, and Rad51 during presynaptic complex assembly. We show that Rad52 binds RPA–ssDNA and suppresses RPA turnover, highlighting an unanticipated regulatory influence on protein dynamics. Rad51 binding extends the ssDNA, and Rad52–RPA clusters remain interspersed along the presynaptic complex. These clusters promote additional binding of RPA and Rad52. Together, our work illustrates the spatial and temporal progression of RPA and Rad52 association with the presynaptic complex, and reveals a novel RPA–Rad52–Rad51–ssDNA intermediate, which has implications for understanding how the activities of Rad52 and RPA are coordinated with Rad51 during the later stages recombination. PMID:25195049

  9. Annual Report to the General Assembly of the United Nations for the year 1964-65. Explanatory Note

    International Nuclear Information System (INIS)

    1965-01-01

    By Resolution GC(IX)/RES/l87 the General Conference decided that the Agency's Annual Report to the General Assembly of the United Nations for 1964-65 would consist of the annual report of the Board of Governors to the General Conference for 1964-65, together with a supplement. The annual report has been issued as document GC(IX)/299. The present document contains the supplement which deals with developments in the Agency's work during the period 1 July to 1 October 1965, including action taken by the General Conference at its ninth regular session which took place in Tokyo from 21 to 28 September 1965

  10. Annual Report to the General Assembly of the United Nations for the Year 1959-60. Explanatory Note

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1960-10-21

    By resolution GC(IV)/RES/62 the General Conference decided that the Agency's annual report to the General Assembly of the United Nations for 1959-60 would consist of the annual report of the Board of Governors to the General Conference for 1959-60, together with a supplement. The annual report of the Board has been issued as document GC(IV)/ 114. The present document contains the supplement which deals with developments in the Agency's work during the period 1 July to 30 September 1960, including action taken by the General Conference at its fourth regular session.

  11. Annual Report to the General Assembly of the United Nations for the year 1964-65. Explanatory Note

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1965-10-29

    By Resolution GC(IX)/RES/l87 the General Conference decided that the Agency's Annual Report to the General Assembly of the United Nations for 1964-65 would consist of the annual report of the Board of Governors to the General Conference for 1964-65, together with a supplement. The annual report has been issued as document GC(IX)/299. The present document contains the supplement which deals with developments in the Agency's work during the period 1 July to 1 October 1965, including action taken by the General Conference at its ninth regular session which took place in Tokyo from 21 to 28 September 1965.

  12. Annual Report to the General Assembly of the United Nations for the Year 1960-61. Explanatory Note

    International Nuclear Information System (INIS)

    1961-01-01

    By resolution GC(V)/RES/89 the General Conference decided that the Agency's annual report to the General Assembly of the United Nations for 1960-61 would consist of the annual report of the Board of Governors to the General Conference for 1960-61, together with a supplement. The annual report of the Board has been issued as document GC(V)/154. The present document contains the supplement which deals with developments in the Agency's work during the period 1 July to 6 October 1961, including action taken by the General Conference at its fifth regular session

  13. Annual Report to the General Assembly of the United Nations for the Year 1961-62. Explanatory Note

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1962-10-12

    By Resolution GC(VI)/RES/114 the General Conference decided that the Agency's annual report to the General Assembly of the United Nations for 1961-62 would consist of the annual report of the Board of Governors to the General Conference for 1961-62, together with a supplement. The annual report of the Board has been issued as document GC(VI)/195. The present document contains the supplement which deals with developments in the Agency's work during the period 1 July to 1 October 1962, including action taken by the General Conference at its sixth regular session.

  14. Annual Report to the General Assembly of the United Nations for the Year 1960-61. Explanatory Note

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1961-10-26

    By resolution GC(V)/RES/89 the General Conference decided that the Agency's annual report to the General Assembly of the United Nations for 1960-61 would consist of the annual report of the Board of Governors to the General Conference for 1960-61, together with a supplement. The annual report of the Board has been issued as document GC(V)/154. The present document contains the supplement which deals with developments in the Agency's work during the period 1 July to 6 October 1961, including action taken by the General Conference at its fifth regular session.

  15. Annual Report to the General Assembly of the United Nations for the Year 1959-60. Explanatory Note

    International Nuclear Information System (INIS)

    1960-01-01

    By resolution GC(IV)/RES/62 the General Conference decided that the Agency's annual report to the General Assembly of the United Nations for 1959-60 would consist of the annual report of the Board of Governors to the General Conference for 1959-60, together with a supplement. The annual report of the Board has been issued as document GC(IV)/ 114. The present document contains the supplement which deals with developments in the Agency's work during the period 1 July to 30 September 1960, including action taken by the General Conference at its fourth regular session

  16. Annual Report to the General Assembly of the United Nations for the Year 1961-62. Explanatory Note

    International Nuclear Information System (INIS)

    1962-01-01

    By Resolution GC(VI)/RES/114 the General Conference decided that the Agency's annual report to the General Assembly of the United Nations for 1961-62 would consist of the annual report of the Board of Governors to the General Conference for 1961-62, together with a supplement. The annual report of the Board has been issued as document GC(VI)/195. The present document contains the supplement which deals with developments in the Agency's work during the period 1 July to 1 October 1962, including action taken by the General Conference at its sixth regular session

  17. Treatment Needs and Adverse Events Related to Dental Treatment under General Anesthesia for Individuals with Autism

    Science.gov (United States)

    Rada, Robert E.

    2013-01-01

    Individuals with autism can be quite challenging to treat in a routine dental-office setting, especially when extensive dental treatment and disruptive behavioral issues exist. Individuals with autism may also be at higher risk for oral disease. Frequently, general anesthesia is the only method to facilitate completion of the needed dental…

  18. Assembly of individual TiO2-C60/porphyrin hybrid nanoparticles for enhancement of photoconversion efficiency

    International Nuclear Information System (INIS)

    Jang, Jae Kwon; Park, Se Ho; Song, Hyunjoon; Park, Joon T; Kim, Chulwoo; Ko, Jaejung; Seo, Won Seok

    2011-01-01

    Rational organization of porphyrin and C 60 on the electrode surface in photovoltaic structures is essential to yield high quantum efficiency. In the present work, individual TiO 2 nanoparticles were modified by introducing C 60 and porphyrin units on the surface, and then electrophoretically deposited on an ITO/SnO 2 electrode. The morphology of the photoactive layer on the electrode was significantly different from that of the layer produced as a result of separate deposition of C 60 and porphyrin. The maximum incident photon to current efficiency of the resulting electrode approached 88% at 410 nm, which is the highest value among molecule-based photovoltaic cells reported to date. This indicates that molecular assembly of the C 60 and porphyrin units on the individual nanoparticles through strong chemical attachment is a key factor in improving effective electron transfer between the photoactive units and the electrodes.

  19. Population genetic analysis of shotgun assemblies of genomic sequences from multiple individuals

    DEFF Research Database (Denmark)

    Hellmann, Ines; Mang, Yuan; Gu, Zhiping

    2008-01-01

    We introduce a simple, broadly applicable method for obtaining estimates of nucleotide diversity from genomic shotgun sequencing data. The method takes into account the special nature of these data: random sampling of genomic segments from one or more individuals and a relatively high error rate...... for individual reads. Applying this method to data from the Celera human genome sequencing and SNP discovery project, we obtain estimates of nucleotide diversity in windows spanning the human genome and show that the diversity to divergence ratio is reduced in regions of low recombination. Furthermore, we show...

  20. Generalization of positive and negative attitudes towards individuals to outgroup attitudes

    NARCIS (Netherlands)

    Stark, Tobias; Flache, Andreas; Veenstra, René

    The generalization of attitudes toward individual outgroup members into attitudes toward the outgroup as a whole can affect intergroup relations. However, little is known about the relative strengths of the generalization of negative and positive interpersonal attitudes into attitudes about the

  1. “Her place among the nations of the earth”: Irish votes at the UN General Assembly, 1955-2005

    Directory of Open Access Journals (Sweden)

    Christophe Gillissen

    2007-03-01

    Full Text Available Since joining the United Nations in 1955, Ireland has enjoyed a good reputation within the organization because of its commitment to multilateral diplomacy and its progressive position on human rights, self-determination and disarmament. However, when voting on resolutions in the General Assembly, the Irish delegation must take into account its effectiveness and impact on the UN, as well as the position of other countries. The USA has exerted particular pressure from the beginning, and since 1973 Ireland has also had to comply with the requirements of European solidarity. Nonetheless, various studies of Irish votes at the General Assembly show that on the whole Ireland has maintained a distinctive profile, faithful to its traditional values. Despite some changes over time, continuity seems to be the hallmark of Ireland’s UN policy, which is characterised by a moderate, constructive approach within the framework of a progressive grouping of states

  2. One voice or different choice?: Vote defection of European Union member states in the United Nations General Assembly

    DEFF Research Database (Denmark)

    Burmester, Nicolas; Jankowski, Michael

    2018-01-01

    Existing research suggests that European Union member states are increasingly able to act in concert in the United Nations General Assembly. Based on several hundred co-ordination meetings per year, the European Union ‘speaks with one voice’ on most of the resolutions voted upon in the United...... Nations General Assembly. However, little is known about instances where the European Union member states do not vote coherently. Three questions remain unanswered. First, which aspects affect deviating voting behaviour of European Union member states? Second, who are the most frequent defectors from...... the European Union’s majority position? Third, which voting blocs within the European Union can be identified? The article answers these questions in a quantitative design by controlling for domestic factors, issues of resolutions and the position of the United States. The results suggest that domestic aspects...

  3. Statement to Sixty-Seventh Regular Session of United Nations General Assembly, 5 Nov 2012, New York, United States

    International Nuclear Information System (INIS)

    Amano, Y.

    2012-01-01

    When I addressed the General Assembly a year ago, I spoke at some length about the accident at the Fukushima Daiichi nuclear power plant in Japan in March 2011. The aftermath of the devastating earthquake and tsunami dominated the work of the IAEA for much of that year. We are now well into the post-accident phase. The focus is on implementing the IAEA Action Plan on Nuclear Safety which was adopted by our Member States last year. Progress has been made in many areas. Measures have been taken to improve protection against extreme hazards such as earthquakes and tsunamis. Countries are upgrading their emergency preparedness and response capabilities. IAEA safety standards are being reviewed. Our programme of expert peer review services is being expanded. A key priority for all nuclear power plant operators has been establishing reliable back-up electricity supply in the event of a prolonged blackout. Already, it is fair to say that nuclear power is safer than it was before the Fukushima Daiichi accident. But the process of ensuring that the right lessons are learned will continue for many years. It is essential that the Action Plan is implemented in full. Next month, the IAEA and the Government of Japan will hold a Ministerial Conference on Nuclear Safety in Fukushima Prefecture. At this Conference, we will present the conclusions of international expert meetings on issues such as reactor and spent fuel safety, responding to tsunamis and earthquakes, and transparency and communication. We will also prepare a comprehensive report on the Fukushima Daiichi accident, to be finalized in 2014. The lasting legacy of the accident will be a much more intense focus on safety. Nuclear safety remains the responsibility of individual countries. However, governments have recognized that effective international cooperation is vitally important and that the IAEA has a unique role to play. (IAEA)

  4. Statement to the Sixtieth Regular Session of the United Nations General Assembly, 31 October 2005, New York, USA

    International Nuclear Information System (INIS)

    ElBaradei, M.

    2005-01-01

    In his statement to the Sixtieth Regular Session of the United Nations General Assembly the Director General of the IAEA highlighted developments related to each part of the Agency's mission - technology, safety and verification - and outlined a few objectives for the future. In the area of nuclear technology it was reported that a considerable change in attitudes towards nuclear energy is taking place. Fast growing global energy demands, an increased emphasis on the security of energy supply, and the risk of climate change are driving a renewed consideration of nuclear power. A group of senior expert was established who explored options for multilateral control of fuel cycle facilities to address challenges posed by proliferation sensitive operations, such as those related to uranium enrichment and plutonium separation. Much attention was given to the first step - to provide the assurance of supply of nuclear fuel and technology at competitive market prices. These multilateral approaches could offer additional advantages in terms of safety, security and economics. IAEA activities in the fields of food and agriculture, environmental applications and human health were reviewed including the Agency's Programme of Action for Cancer Therapy (PACT). Concerning nuclear safety and security the IAEA has made progress on multiple fronts. The Convention on Nuclear Safety has evolved into a forum for more substantive discussion on safety issues, incorporating feedback and lessons learned from the results of IAEA peer reviews. IAEA safety standards are receiving increasingly broad acceptance as the global reference for protecting people and the environment against nuclear accidents and harmful radiation exposure. A report on 'Chernobyl's Legacy' was issued. The International Convention on the Suppression of Acts of Nuclear Terrorism, adopted by the General Assembly in April, requires States Parties to criminalize the unlawful possession and use of radioactive material and the

  5. Phenotypes of individuals affected by airborne chemicals in the general population

    DEFF Research Database (Denmark)

    Berg, Nikolaj Drimer; Linneberg, A.; Dirksen, Asger

    2009-01-01

    to symptoms than less severely affected individuals, and the number of symptoms was more predictive for severity than the number of exposures. Most predictive for the severity of reported symptoms were CNS-symptoms other than headache (OR = 3.2, P ... (OR = 2.0, P = 0.001). CONCLUSION: CNS-symptoms except from headache were a main characteristic of individuals severely affected by common chemical exposures in a general population-based sample...

  6. NEW DEVELOPMENTS IN LOW TEMPERATURE PHYSICS : Part of the Activity Report to the IUPAP General Assembly

    Science.gov (United States)

    Hallock, Bob; Paalanen, Mikko

    2009-03-01

    Below you find part of the Activity Report to the IUPAP General Assembly, October 2008, by the present and previous Chairmen of C5. It provides an overview of the most important and recent developments in low temperature physics, much in line with the program of LT25. For the field of experimental low temperature physics, the ability to conduct research has been damaged by the dramatic increase in the price of liquid helium. In the United States for example, the price of liquid helium has approximately doubled over the past two years. This has led to a reduction in activity in many laboratories as the funding agencies have not quickly increased support in proportion. The increase in price of liquid helium has accelerated interest in the development and use of alternative cooling systems. In particular, pulse tube coolers are now available that will allow cryostats with modest cooling needs to operate dilution refrigerators without the need for repeated refills of liquid helium from external supply sources. Solid helium research has seen a dramatic resurgence. Torsional oscillator experiments have been interpreted to show that solid helium may undergo a transition to a state in which some of the atoms in the container do not follow the motion of the container, e.g. may be 'supersolid'. The observation is robust, but the interpretation is controversial. The shear modulus of solid helium undergoes a similar signature with respect to temperature. Experiments that should be expected to cause helium to flow give conflicting results. Theory predicts that a perfect solid cannot show supersolid behavior, but novel superfluid-like behavior should be seen in various defects that can exist in the solid, and vorticity may play a significant role. And, recently there have been reports of unusual mass decoupling in films of pure 4He on graphite surfaces as well as 3He-4He mixture films on solid hydrogen surfaces. These may be other examples of unusual superfluid-like behavior

  7. Thin silica shell coated Ag assembled nanostructures for expanding generality of SERS analytes.

    Directory of Open Access Journals (Sweden)

    Myeong Geun Cha

    Full Text Available Surface-enhanced Raman scattering (SERS provides a unique non-destructive spectroscopic fingerprint for chemical detection. However, intrinsic differences in affinity of analyte molecules to metal surface hinder SERS as a universal quantitative detection tool for various analyte molecules simultaneously. This must be overcome while keeping close proximity of analyte molecules to the metal surface. Moreover, assembled metal nanoparticles (NPs structures might be beneficial for sensitive and reliable detection of chemicals than single NP structures. For this purpose, here we introduce thin silica-coated and assembled Ag NPs (SiO2@Ag@SiO2 NPs for simultaneous and quantitative detection of chemicals that have different intrinsic affinities to silver metal. These SiO2@Ag@SiO2 NPs could detect each SERS peak of aniline or 4-aminothiophenol (4-ATP from the mixture with limits of detection (LOD of 93 ppm and 54 ppb, respectively. E-field distribution based on interparticle distance was simulated using discrete dipole approximation (DDA calculation to gain insight into enhanced scattering of these thin silica coated Ag NP assemblies. These NPs were successfully applied to detect aniline in river water and tap water. Results suggest that SiO2@Ag@SiO2 NP-based SERS detection systems can be used as a simple and universal detection tool for environment pollutants and food safety.

  8. Attention Training in Individuals with Generalized Social Phobia: A Randomized Controlled Trial

    Science.gov (United States)

    Amir, Nader; Beard, Courtney; Taylor, Charles T.; Klumpp, Heide; Elias, Jason; Burns, Michelle; Chen, Xi

    2009-01-01

    The authors conducted a randomized, double-blind placebo-controlled trial to examine the efficacy of an attention training procedure in reducing symptoms of social anxiety in 44 individuals diagnosed with generalized social phobia (GSP). Attention training comprised a probe detection task in which pictures of faces with either a threatening or…

  9. 49 CFR 213.305 - Designation of qualified individuals; general qualifications.

    Science.gov (United States)

    2010-10-01

    ... college level engineering program, supplemented by special on the job training emphasizing the techniques... engineering program, supplemented by special on the job training emphasizing the techniques to be employed in... 49 Transportation 4 2010-10-01 2010-10-01 false Designation of qualified individuals; general...

  10. Association between Speech-Language, General Cognitive Functioning and Behaviour Problems in Individuals with Williams Syndrome

    Science.gov (United States)

    Rossi, N. F.; Giacheti, C. M.

    2017-01-01

    Background: Williams syndrome (WS) phenotype is described as unique and intriguing. The aim of this study was to investigate the associations between speech-language abilities, general cognitive functioning and behavioural problems in individuals with WS, considering age effects and speech-language characteristics of WS sub-groups. Methods: The…

  11. Statement to the fifty-third session of the United Nations General Assembly, New York, 2 November 1998

    International Nuclear Information System (INIS)

    ElBaradei, M.

    1998-01-01

    The document reproduces the statement of the Director General of the IAEA at the fifty-third session of the United Nations General Assembly in New York, USA, on 2 November 1998. The statement focuses on the priority work of the Agency under the following main headings: contribution to peace and security (including the IAEA's strengthened safeguards system, inspections in Iraq, safeguards verifications in the Democratic People's Republic of Korea, future prospects of verification, illicit trafficking in nuclear material), co-operation for development (the Agency's technical co-operation programme), and meeting global challenges in the field of energy, the environment and nuclear safety. The statement concludes with a description of the process of management review and reform initiated by the Director General to ensure that the Agency is responding efficiently and effectively to the needs of its Member States

  12. Statement to the 64. Regular Session of the United Nations General Assembly, 2 November 2009, New York, USA

    International Nuclear Information System (INIS)

    ElBaradei, M.

    2009-01-01

    This is the last speech of Dr. Mohamed ElBaradei to the General Assembly as Director General of the International Atomic Energy Agency. He is reviewing the achievements of the IAEA during the last 12 years of his service to the Agency as Director General. He summarizes the activities of nuclear power, nuclear safety, technical cooperation, the Programme of Action for Cancer Therapy (PACT), the technical cooperation programme, the global non-proliferation landscape (in particular Iraq and the DPRK), uranium enrichment and plutonium reprocessing, as well as nuclear disarmament. Ultimately, a new global system of collective security is needed that entails an overhaul of the United Nations system and, above all, of the Security Council. A new system in which no country feels the need to rely on nuclear weapons for its security. A new system with effective global mechanisms for conflict prevention, peacekeeping and peacemaking. An equitable and inclusive system in which security is not perceived as a zero sum game, or based on domination, or on a balance of power. A system that places human security and human solidarity at its core, that grasps our shared destiny as one human family and that enables all of us to live together free from fear and free from want. In concluding, he takes this opportunity to express his deep gratitude to the Republic of Austria for being a most gracious and supportive host country of the IAEA. He congratulates his successor, Director General-elect Yukiya Amano, and wishes him every success. He thanks the General Assembly for its support during his 12 years as Director General

  13. Self-assembly of the general membrane-remodeling protein PVAP into sevenfold virus-associated pyramids.

    Science.gov (United States)

    Daum, Bertram; Quax, Tessa E F; Sachse, Martin; Mills, Deryck J; Reimann, Julia; Yildiz, Özkan; Häder, Sabine; Saveanu, Cosmin; Forterre, Patrick; Albers, Sonja-Verena; Kühlbrandt, Werner; Prangishvili, David

    2014-03-11

    Viruses have developed a wide range of strategies to escape from the host cells in which they replicate. For egress some archaeal viruses use a pyramidal structure with sevenfold rotational symmetry. Virus-associated pyramids (VAPs) assemble in the host cell membrane from the virus-encoded protein PVAP and open at the end of the infection cycle. We characterize this unusual supramolecular assembly using a combination of genetic, biochemical, and electron microscopic techniques. By whole-cell electron cryotomography, we monitored morphological changes in virus-infected host cells. Subtomogram averaging reveals the VAP structure. By heterologous expression of PVAP in cells from all three domains of life, we demonstrate that the protein integrates indiscriminately into virtually any biological membrane, where it forms sevenfold pyramids. We identify the protein domains essential for VAP formation in PVAP truncation mutants by their ability to remodel the cell membrane. Self-assembly of PVAP into pyramids requires at least two different, in-plane and out-of-plane, protein interactions. Our findings allow us to propose a model describing how PVAP arranges to form sevenfold pyramids and suggest how this small, robust protein may be used as a general membrane-remodeling system.

  14. Low-energy coupling of individual and collective degrees of freedom: a general microscopic approach

    International Nuclear Information System (INIS)

    Quentin, P.; Meyer, M.

    1988-01-01

    A general microscopic approach of low energy coupling of individual and collective degrees of freedom is presented. The ingredients of a Bohr-Mottelson unified model description are determined consistently from the Skyrme SIII effective interaction, through the adiabatic limit of the time-dependent Hartree-Fock-Bogoliubov approximation. Three specific aspects will be mostly developed: i) the effect of pairing correlations on adiabatic mass parameters and collective dynamics; ii) a consistent coupling of collective and individual degrees of freedom to describe odd nuclei; iii) a study of spectroscopic data in odd-odd nuclei as a test of effective nucleon-nucleon interactions. (author)

  15. Fireworks Assembler (Fireworks) 737.887 -- Technical Report on Standardization of the General Aptitude Test Battery.

    Science.gov (United States)

    Manpower Administration (DOL), Washington, DC. U.S. Training and Employment Service.

    The United States Training and Employment Service General Aptitude Test Battery (GATB), first published in 1947, has been included in a continuing program of research to validate the tests against success in many different occupations. The GATB consists of 12 tests which measure nine aptitudes: General Learning Ability; Verbal Aptitude; Numerical…

  16. Bacteriophage Assembly

    Directory of Open Access Journals (Sweden)

    Anastasia A. Aksyuk

    2011-02-01

    Full Text Available Bacteriophages have been a model system to study assembly processes for over half a century. Formation of infectious phage particles involves specific protein-protein and protein-nucleic acid interactions, as well as large conformational changes of assembly precursors. The sequence and molecular mechanisms of phage assembly have been elucidated by a variety of methods. Differences and similarities of assembly processes in several different groups of bacteriophages are discussed in this review. The general principles of phage assembly are applicable to many macromolecular complexes.

  17. Trait contributions to fish community assembly emerge from trophicinteractions in an individual-based model

    Science.gov (United States)

    Giacomini, Henrique C.; DeAngelis, Donald; Trexler, Joel C.; Petrere, Miguel

    2013-01-01

    Community ecology seeks to understand and predict the characteristics of communities that can develop under different environmental conditions, but most theory has been built on analytical models that are limited in the diversity of species traits that can be considered simultaneously. We address that limitation with an individual-based model to simulate assembly of fish communities characterized by life history and trophic interactions with multiple physiological tradeoffs as constraints on species performance. Simulation experiments were carried out to evaluate the distribution of 6 life history and 4 feeding traits along gradients of resource productivity and prey accessibility. These experiments revealed that traits differ greatly in importance for species sorting along the gradients. Body growth rate emerged as a key factor distinguishing community types and defining patterns of community stability and coexistence, followed by egg size and maximum body size. Dominance by fast-growing, relatively large, and fecund species occurred more frequently in cases where functional responses were saturated (i.e. high productivity and/or prey accessibility). Such dominance was associated with large biomass fluctuations and priority effects, which prevented richness from increasing with productivity and may have limited selection on secondary traits, such as spawning strategies and relative size at maturation. Our results illustrate that the distribution of species traits and the consequences for community dynamics are intimately linked and strictly dependent on how the benefits and costs of these traits are balanced across different conditions.

  18. Associations Between General and Abdominal Adiposity and Mortality in Individuals With Diabetes Mellitus

    DEFF Research Database (Denmark)

    Sluik, Diewertje; Boeing, Heiner; Montonen, Jukka

    2011-01-01

    Individuals with diabetes mellitus are advised to achieve a healthy weight to prevent complications. However, fat mass distribution has hardly been investigated as a risk factor for diabetes complications. The authors studied associations between body mass index, waist circumference, waist....../hip ratio, and waist/height ratio and mortality among individuals with diabetes mellitus. Within the European Prospective Investigation into Cancer and Nutrition, a subcohort was defined as 5,435 individuals with a confirmed self-report of diabetes mellitus at baseline in 1992-2000. Participants were aged...... 57.3 (standard deviation, 6.3) years, 54% were men, the median diabetes duration was 4.6 (interquartile range, 2.0-9.8) years, and 22% of the participants used insulin. Body mass index, as indicator of general obesity, was not associated with higher mortality, whereas all measurements of abdominal...

  19. General Syntheses of Nanotubes Induced by Block Copolymer Self-Assembly

    DEFF Research Database (Denmark)

    Zhao, Jianming; Huang, Wei; Si, Pengchao

    2018-01-01

    Amphiphilic block copolymer templating strategies are extensively used for syntheses of mesoporous materials. However, monodisperse tubular nanostructures are limited. Here, a general method is developed to synthesize monodisperse nanotubes with narrow diameter distribution induced by self...

  20. Statement to the 65. Regular Session of the United Nations General Assembly, 8 November 2010, New York, USA

    International Nuclear Information System (INIS)

    Amano, Y.

    2010-01-01

    This is my first report to the General Assembly as Director General of the International Atomic Energy Agency. A constant theme of my first year in office has been to pursue objectives in regard to the non-proliferation of nuclear weapons and the promotion of the peaceful uses of nuclear energy in a balanced manner. I am trying to change the widespread perception of the Agency as simply the world's 'nuclear watchdog' because it does not do justice to our extensive activities in other areas, especially in nuclear energy, nuclear science and applications, and technical cooperation. Today, I will review the highlights of the Agency's work in the past year and share some thoughts on current issues

  1. Distrust As a Disease Avoidance Strategy: Individual Differences in Disgust Sensitivity Regulate Generalized Social Trust.

    Science.gov (United States)

    Aarøe, Lene; Osmundsen, Mathias; Petersen, Michael Bang

    2016-01-01

    Throughout human evolutionary history, cooperative contact with others has been fundamental for human survival. At the same time, social contact has been a source of threats. In this article, we focus on one particular viable threat, communicable disease, and investigate how motivations to avoid pathogens influence people's propensity to interact and cooperate with others, as measured by individual differences in generalized social trust. While extant studies on pathogen avoidance have argued that such motivations should prompt people to avoid interactions with outgroups specifically, we argue that these motivations should prompt people to avoid others more broadly. Empirically, we utilize two convenience samples and a large nationally representative sample of US citizens to demonstrate the existence of a robust and replicable effect of individual differences in pathogen disgust sensitivity on generalized social trust. We furthermore compare the effects of pathogen disgust sensitivity on generalized social trust and outgroup prejudice and explore whether generalized social trust to some extent constitutes a pathway between pathogen avoidance motivations and prejudice.

  2. Distrust As a Disease Avoidance Strategy: Individual Differences in Disgust Sensitivity Regulate Generalized Social Trust

    DEFF Research Database (Denmark)

    Aarøe, Lene; Osmundsen, Mathias; Petersen, Michael Bang

    2016-01-01

    pathogens influence people's propensity to interact and cooperate with others, as measured by individual differences in generalized social trust. While extant studies on pathogen avoidance have argued that such motivations should prompt people to avoid interactions with outgroups specifically, we argue...... social trust. We furthermore compare the effects of pathogen disgust sensitivity on generalized social trust and outgroup prejudice and explore whether generalized social trust to some extent constitutes a pathway between pathogen avoidance motivations and prejudice.......Throughout human evolutionary history, cooperative contact with others has been fundamental for human survival. At the same time, social contact has been a source of threats. In this article, we focus on one particular viable threat, communicable disease, and investigate how motivations to avoid...

  3. 76 FR 10403 - General Motors Company, Pontiac Assembly; Pontiac, MI; Notice of Negative Determination on...

    Science.gov (United States)

    2011-02-24

    ... Agricultural Implement Workers of America (UAW) stated that production of standard cab and extended cab GMC... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-72,554] General Motors Company... October 25, 2010 (75 FR 65513). Workers at GM-Pontiac are engaged in employment related to the production...

  4. Statement to the 34th session of the general conference of the International Atomic Energy Agency, 17 September 1990. Statement to the 45th session of the United Nations general assembly, 23 October 1990

    International Nuclear Information System (INIS)

    Blix, H.

    1991-01-01

    The document contains the following two statements of Hans Blix, Director General of the IAEA: Statement to the 34th Session of the General Conference of the International Atomic Energy Agency, 17 September 1990; Statement to the 45th Session of the United Nations General Assembly, 23 October 1990. A separate abstract was prepared for each of these statements

  5. Statement to the 35th session of the General Conference of the International Atomic Energy Agency 16 September 1991; Statement to the 46th session of the United Nations General Assembly 21 October 1991

    International Nuclear Information System (INIS)

    Blix, H.

    1991-01-01

    The document contains the following two statements of Hans Blix, Director General of the IAEA: Statement to the 35th session of the General Conference of the International Atomic Energy Agency, 16 September 1991; Statement to the 46th session of the United Nations General Assembly, 21 October 1991. A separate abstract was prepared for each of these statements

  6. Statement to the 38th session of the General Conference of the International Atomic Energy Agency 19 September 1994; Statement to the 49th session of the United Nations General Assemblies 17 October 1994

    International Nuclear Information System (INIS)

    Blix, H.

    1994-10-01

    The document reproduces the two statements of the IAEA Director General to the 38th Session of the General conference of the IAEA from 19 September 1994 and to the 49th Session of the United Nations General Assembly from 17 October 1994. A separate abstract was prepared for each statement

  7. General individual attack on the ping-pong protocol with completely entangled pairs of qutrits

    OpenAIRE

    Vasiliu, E. V.

    2009-01-01

    The general individual (non-coherent) attack on the ping-pong protocol with completely entangled pairs of three-dimensional quantum systems (qutrits) is analyzed. The expression for amount of the eavesdropper's information as functions from probability of attack detection is derived. It is shown, that the security of the ping-pong protocol with pairs of qutrits is higher the security of the protocol with pairs of qubits. It is also shown, that with the use by legitimate users in a control mod...

  8. Predictive validity of the Work Ability Index and its individual items in the general population.

    Science.gov (United States)

    Lundin, Andreas; Leijon, Ola; Vaez, Marjan; Hallgren, Mats; Torgén, Margareta

    2017-06-01

    This study assesses the predictive ability of the full Work Ability Index (WAI) as well as its individual items in the general population. The Work, Health and Retirement Study (WHRS) is a stratified random national sample of 25-75-year-olds living in Sweden in 2000 that received a postal questionnaire ( n = 6637, response rate = 53%). Current and subsequent sickness absence was obtained from registers. The ability of the WAI to predict long-term sickness absence (LTSA; ⩾ 90 consecutive days) during a period of four years was analysed by logistic regression, from which the Area Under the Receiver Operating Characteristic curve (AUC) was computed. There were 313 incident LTSA cases among 1786 employed individuals. The full WAI had acceptable ability to predict LTSA during the 4-year follow-up (AUC = 0.79; 95% CI 0.76 to 0.82). Individual items were less stable in their predictive ability. However, three of the individual items: current work ability compared with lifetime best, estimated work impairment due to diseases, and number of diagnosed current diseases, exceeded AUC > 0.70. Excluding the WAI item on number of days on sickness absence did not result in an inferior predictive ability of the WAI. The full WAI has acceptable predictive validity, and is superior to its individual items. For public health surveys, three items may be suitable proxies of the full WAI; current work ability compared with lifetime best, estimated work impairment due to diseases, and number of current diseases diagnosed by a physician.

  9. Observational and genetic plasma YKL-40 and cancer in 96,099 individuals from the general population

    DEFF Research Database (Denmark)

    Kjaergaard, Alisa D; Nordestgaard, Børge G; Johansen, Julia S

    2015-01-01

    . For this purpose, we performed cohort and Mendelian randomization studies in 96,099 individuals from the Danish general population. Plasma levels of YKL-40 were measured in 21,643 and CHI3L1 rs4950928 was genotyped in 94,568 individuals. From 1943 through 2011, 2,291 individuals developed gastrointestinal cancer...

  10. Statement to the 41st session of the General Conference of the International Atomic Energy Agency 29 September 1997; Statement to the 52nd session of the United Nations General Assembly 12 November 1997

    International Nuclear Information System (INIS)

    Blix, H.

    1997-12-01

    The document presents Statement to the 41st Session of the General Conference of the International Atomic Energy Agency and Statement to the 52nd Session of the United Nations General Assembly made at the 40th anniversary of the IAEA

  11. Statement to the 39th session of the General Conference of the International Atomic Energy Agency 18 September 1995. Statement to the 50th session of the United Nations General Assembly 1 November 1995

    International Nuclear Information System (INIS)

    Blix, H.

    1995-11-01

    In the Statement to the 39th Session of the General Conference of the IAEA main directions of IAEA activities for 1994 and plans for the future are outlined. In the Statement to the 50th Session of the United Nations General Assembly main achievements and challenges facing the international community in the field of IAEA competence are discussed

  12. Statement to the 39th session of the General Conference of the International Atomic Energy Agency 18 September 1995. Statement to the 50th session of the United Nations General Assembly 1 November 1995

    Energy Technology Data Exchange (ETDEWEB)

    Blix, H

    1995-11-01

    In the Statement to the 39th Session of the General Conference of the IAEA main directions of IAEA activities for 1994 and plans for the future are outlined. In the Statement to the 50th Session of the United Nations General Assembly main achievements and challenges facing the international community in the field of IAEA competence are discussed.

  13. Statement to the 40th session of the General Conference of the International Atomic Energy Agency 16 September 1996; Statement to the 51st session of the United Nations General Assembly 28 October 1996

    International Nuclear Information System (INIS)

    Blix, H.

    1996-11-01

    In the Statement to the 40th Session of the General Conference of the International Atomic Energy Agency main directions of the IAEA activities and plans for the future are outlined. In the Statement to the 51th Session of the United Nations General Assembly main achievements and challenge facing the international community in the field of IAEA competence are discussed

  14. Social phobia in Finnish general adolescent population: prevalence, comorbidity, individual and family correlates, and service use.

    Science.gov (United States)

    Ranta, Klaus; Kaltiala-Heino, Riittakerttu; Rantanen, Päivi; Marttunen, Mauri

    2009-01-01

    Few studies have investigated the epidemiology of social phobia (SP) among early to middle adolescents, at the time of suggested mean onset of the disorder. The objective of this study was to investigate the prevalence, comorbidity, individual and familial correlates, and service use associated with SP among Finnish 12-17-year-old adolescents in general population. A sample of 784 adolescents was screened with the Social Phobia Inventory, and a sub-sample (n=350) was interviewed with a semi-structured clinical interview to identify SP, sub-clinical SP (SSP), and a range of other axis I DSM-IV disorders. Individual and familial correlates, and service use associated with SP were also inquired. We found a 12-month prevalence of 3.2% for SP, and 4.6% for SSP. The prevalence rose and the gender ratio shifted to female preponderance as age increased. SP was frequently comorbid with other anxiety disorders (41%) and depressive disorders (41%). Adolescents with SP/SSP were impaired in their academic and global functioning, and reported more parental psychiatric treatment contacts. Two thirds (68%) of adolescents with SP reported having been bullied by peers. Only one fifth of adolescents with non-comorbid SP had been in contact with a mental health professional. We conclude that adolescent SP is a relatively frequent, undertreated and highly comorbid condition, associated with educational impairment, depression and anxiety in parents, and peer victimization. (c) 2009 Wiley-Liss, Inc.

  15. The role of international institutions in the formation of international bioethical law: UNESCO and the United Nations General Assembly attempt to govern human cloning.

    Science.gov (United States)

    Kuppuswamy, Chamundeeswari

    2007-01-01

    This article analyses the international governance of human reproductive cloning. Noting that bioethics is a new field of engagement for international lawyers, it recounts some of the institutional developments in bioethical law making. The role of UNESCO and the United Nations General Assembly is scrutinized and the author discusses the relative merits of the institutions' governance of human reproductive cloning. The author suggests that some international institutions and mechanisms are better suited than others for bioethical law making. The 2005 General Assembly resolution on human cloning is analysed in this context.

  16. BioNano genome mapping of individual chromosomes supports physical mapping and sequence assembly in complex plant genomes.

    Science.gov (United States)

    Staňková, Helena; Hastie, Alex R; Chan, Saki; Vrána, Jan; Tulpová, Zuzana; Kubaláková, Marie; Visendi, Paul; Hayashi, Satomi; Luo, Mingcheng; Batley, Jacqueline; Edwards, David; Doležel, Jaroslav; Šimková, Hana

    2016-07-01

    The assembly of a reference genome sequence of bread wheat is challenging due to its specific features such as the genome size of 17 Gbp, polyploid nature and prevalence of repetitive sequences. BAC-by-BAC sequencing based on chromosomal physical maps, adopted by the International Wheat Genome Sequencing Consortium as the key strategy, reduces problems caused by the genome complexity and polyploidy, but the repeat content still hampers the sequence assembly. Availability of a high-resolution genomic map to guide sequence scaffolding and validate physical map and sequence assemblies would be highly beneficial to obtaining an accurate and complete genome sequence. Here, we chose the short arm of chromosome 7D (7DS) as a model to demonstrate for the first time that it is possible to couple chromosome flow sorting with genome mapping in nanochannel arrays and create a de novo genome map of a wheat chromosome. We constructed a high-resolution chromosome map composed of 371 contigs with an N50 of 1.3 Mb. Long DNA molecules achieved by our approach facilitated chromosome-scale analysis of repetitive sequences and revealed a ~800-kb array of tandem repeats intractable to current DNA sequencing technologies. Anchoring 7DS sequence assemblies obtained by clone-by-clone sequencing to the 7DS genome map provided a valuable tool to improve the BAC-contig physical map and validate sequence assembly on a chromosome-arm scale. Our results indicate that creating genome maps for the whole wheat genome in a chromosome-by-chromosome manner is feasible and that they will be an affordable tool to support the production of improved pseudomolecules. © 2016 The Authors. Plant Biotechnology Journal published by Society for Experimental Biology and The Association of Applied Biologists and John Wiley & Sons Ltd.

  17. Individual and social learning processes involved in the acquisition and generalization of tool use in macaques

    Science.gov (United States)

    Macellini, S.; Maranesi, M.; Bonini, L.; Simone, L.; Rozzi, S.; Ferrari, P. F.; Fogassi, L.

    2012-01-01

    Macaques can efficiently use several tools, but their capacity to discriminate the relevant physical features of a tool and the social factors contributing to their acquisition are still poorly explored. In a series of studies, we investigated macaques' ability to generalize the use of a stick as a tool to new objects having different physical features (study 1), or to new contexts, requiring them to adapt the previously learned motor strategy (study 2). We then assessed whether the observation of a skilled model might facilitate tool-use learning by naive observer monkeys (study 3). Results of study 1 and study 2 showed that monkeys trained to use a tool generalize this ability to tools of different shape and length, and learn to adapt their motor strategy to a new task. Study 3 demonstrated that observing a skilled model increases the observers' manipulations of a stick, thus facilitating the individual discovery of the relevant properties of this object as a tool. These findings support the view that in macaques, the motor system can be modified through tool use and that it has a limited capacity to adjust the learnt motor skills to a new context. Social factors, although important to facilitate the interaction with tools, are not crucial for tool-use learning. PMID:22106424

  18. IgE and risk of cancer in 37 747 individuals from the general population

    DEFF Research Database (Denmark)

    Helby, J; Bojesen, S E; Nielsen, S F

    2015-01-01

    E are associated with overall risk of cancer and with risk of specific cancers. MATERIALS AND METHODS: Plasma total IgE was measured in 37 747 individuals from the general population, and the participants were followed prospectively for up to 30 years. All statistical tests were two-sided. RESULTS: During a mean...... follow-up of 7 years, a first cancer was diagnosed in 3454 participants. The multivariable adjusted hazard ratio for a 10-fold higher level of IgE was 1.05 [95% confidence interval (CI) 1.00-1.11; P = 0.04] for any cancer, 0.44 (0.30-0.64; P = 0.00002) for chronic lymphocytic leukemia (CLL), 0.53 (0.......33-0.84; P = 0.007) for multiple myeloma, 1.54 (1.04-2.29; P = 0.03) for other non-Hodgkin lymphoma, 1.38 (1.04-1.84; P = 0.03) for cancer of the oral cavity and pharynx, and 1.12 (1.00-1.25; P = 0.05) for lung cancer. The findings for CLL and multiple myeloma were generally robust; however, after correcting...

  19. IAU General Assembly

    CERN Document Server

    Corbelli, Edvige; Zinnecker, Hans; THE INITIAL MASS FUNCTION 50 YEARS LATER

    2005-01-01

    The Book contains the proceedings of a Conference intended to celebrate the 50th anniversary of the introduction of the IMF concept by Ed Salpeter along with Ed Salpeter's 80th birthday. It summarizes a vast amounts of information, and updates the Herstmonceux book on the IMF,(eds. Howell and Gilmore, 1998 - ASP publ). The book collects many long reviews on IMF determinations in the Galaxy, in galaxies, and in the Early Universe as well as deep implications of the IMF on star formation theories and on the physical conditions of the gas before and after star formation. It provides basic information needed for the coverage of these important quantities in graduate courses of Stellar Evolution, Star Formation, Interstellar Medium, Galactic Dynamics, Formation and Evolution of Galaxies. The book covers all aspects of the current researches in this field, as testified by the large number of contributing scientists.

  20. OAS :: General Assembly

    Science.gov (United States)

    subscriptions Videos Photos Live Webcast Social Media Facebook @oasofficial Facebook Twitter @oas_official Scholarships School of Governance Science and Technology Social Development Summits of the Americas Sustainable Development T Telecommunications Terrorism Tourism Trade Treaties and Agreements W Women Y Youth Strategic

  1. Leaders or Loners? How Do the BRICS Countries and their Regions Vote in the UN General Assembly

    Directory of Open Access Journals (Sweden)

    Renan Holanda Montenegro

    2017-08-01

    Full Text Available The so-called emerging powers, including the BRICS nations (Brazil, Russia, India, China and South Africa, typically present themselves as natural leaders of their regions. Although physical size confers them the status of regional powers, their role as leaders depends on the consensual acceptance of their would-be followers. Can it be affirmed then that the countries under the influence of the BRICS show convergent positions? Can the five BRICS be considered de facto leaders of their regions? This article sets out to answer these questions by analysing the behaviour of the BRICS and their regional partners in the United Nations General Assembly (UNGA. The research design replicates the data from Voeten (2013 in order to compare the average affinity between each of the BRICS countries and their regions in the votes of the UNGA from 1992 to 2014. The data indicate a high level of regional cohesion for Brazil, China and South Africa when compared to Russia and India. The findings corroborate the literature in relation to Brazil and South Africa but conflict with what has been produced on the regional leadership of Russia, India and China.

  2. Direct Aggression and Generalized Anxiety in Adolescence: Heterogeneity in Development and Intra-Individual Change.

    Science.gov (United States)

    Meeus, Wim; Van de Schoot, Rens; Hawk, Skyler T; Hale, William W; Branje, Susan

    2016-02-01

    Co-occurrence of aggression and anxiety might change during adolescence, or stay stable. We studied change and stability of four types of co-occurrence regarding direct aggression and anxiety in adolescence: an anxious and non-aggressive type, an aggressive and non-anxious type, a comorbid aggressive-anxious type and a no problems type. We applied a person-centered approach to assess increases and decreases of these types, and tested various models of intra-individual change of the types: the stability, acting out and failure models. We used data from a five-wave study of 923 early-to-middle and 390 middle-to-late adolescents (48.5 % male), thereby covering the ages of 12-20. We observed accelerated development in the older cohort: adolescents tended to grow faster out of the aggressive types in middle-to-late adolescence than in early-to-middle adolescence. We observed one other group-dependent pattern of heterogeneity in development, namely "gender differentiation": gender differences in aggression and generalized anxiety became stronger over time. We found support for two perspectives on intra-individual change of the four types, namely the stability and the acting out perspective. The no problems--and to a lesser extent the anxious--type proved to be stable across time. Acting out was found in early-to-middle adolescents, males, and adolescents with poorer-quality friendships. In all three groups, there were substantial transitions from the anxious type to the aggressive type during 4 years (between 20 and 41 %). Remarkably, acting out was most prevalent in subgroups that, generally speaking, are more vulnerable for aggressive behavior, namely early-to-middle adolescents and males. We interpret acting out as the attempt of adolescents to switch from anxiety to instrumental aggression, in order to become more visible and obtain an autonomous position in the adolescent world. Acting out contributed to the explanation of accelerated development and gender

  3. Avoidant personality disorder in individuals with generalized social anxiety disorder: what does it add?

    Science.gov (United States)

    Marques, Luana; Porter, Eliora; Keshaviah, Aparna; Pollack, Mark H; Van Ameringen, Michael; Stein, Murray B; Simon, Naomi M

    2012-08-01

    Avoidant personality disorder (AvPD) has a high level of symptom overlap and comorbidity with generalized social anxiety disorder (GSAD). We examined whether the presence of comorbid AvPD adds significant clinically relevant information for individuals seeking treatment for GSAD. Results suggested that AvPD was significantly associated with poorer quality of life and greater disability in univariate, but not multivariate analyses. Endorsement of more AvPD symptoms was associated with increased disability, increased risk of intimacy, and lower social support, even after covariate adjustment. Specifically, AvPD item 3, hard to be "open" even with people you are close to, was most strongly correlated with quality of life and disability. A binary diagnosis of AvPD alone adds little beyond a marker of greater GSAD severity and depression among patients with GSAD, while a specific feature of AvPD not captured by the GSAD diagnosis, namely emotional guardedness, may be associated with greater impairment. Published by Elsevier Ltd.

  4. Systematic review and meta-analysis of dropout rates in individual psychotherapy for generalized anxiety disorder.

    Science.gov (United States)

    Gersh, Elon; Hallford, David J; Rice, Simon M; Kazantzis, Nikolaos; Gersh, Hannah; Gersh, Benji; McCarty, Carolyn A

    2017-12-01

    Despite being a relatively prevalent and debilitating disorder, Generalized Anxiety Disorder (GAD) is the second least studied anxiety disorder and among the most difficult to treat. Dropout from psychotherapy is concerning as it is associated with poorer outcomes, leads to service inefficiencies and can disproportionately affect disadvantaged populations. No study to date has calculated a weighted mean dropout rate for GAD and explored associated correlates. A systematic review was conducted using PsycINFO, Medline and Embase databases, identifying studies investigating individual psychotherapies for adults with GAD. Forty-five studies, involving 2224 participants, were identified for meta-analysis. The weighted mean dropout rate was 16.99% (95% confidence interval 14.42%-19.91%). The Q-statistic indicated significant heterogeneity among studies. Moderator analysis and meta-regressions indicated no statistically significant effect of client age, sex, symptom severity, comorbidity, treatment type, study type (randomized trial or not), study quality, number of sessions or therapist experience. In research investigating psychotherapy for GAD, approximately one in six clients can be expected to drop out of treatment. Dropout rate was not significantly moderated by the client, therapist or treatment variables investigated. Future research should specify the definition of dropout, reasons for dropout and associated correlates to assist the field's progression. Copyright © 2017 Elsevier Ltd. All rights reserved.

  5. Statement to the sixty-third regular session of the United Nations General Assembly, 28 October 2008, New York, USA

    International Nuclear Information System (INIS)

    ElBaradei, M.

    2008-01-01

    In his statement to the Sixty-Third Regular Session of the United Nations General Assembly the IAEA's Director General Dr. Mohamed ElBaradei reported on the work of the Agency in the last year and highlighted some of the challenges which need to be addressed. He stressed the importance of the Agency's work in technical cooperation to boost food supplies and combat pests and animal diseases and stated that in some areas the IAEA's role is unique as in mapping water resources by applying nuclear techniques. Concerning nuclear power the IAEA advises countries considering its introduction and assists them to identify their options and the best energy mix. To ensure that newcomers use nuclear energy efficiently, safely, securely and with minimal proliferation risk, the IAEA impresses upon them the need to plan properly, to build the human resources and infrastructure, to establish independent and effective regulators and to adhere to international safety, security and non-proliferation instruments. The Agency offers advice in drafting national nuclear legislation and trains regulators and operators. One implication of a nuclear renaissance is the spread of nuclear material to many more countries. This naturally increases the risk that nuclear material could be diverted to make nuclear weapons. That is why the IAEA needs to think seriously about some form of multinational control over the fuel cycle. According to Dr. Mohamed ElBaradei the ideal scenario would be to start with a nuclear fuel bank under IAEA auspices. Then all new enrichment and reprocessing activities should be placed exclusively under multilateral control. Ultimately, all existing facilities should also be converted from national to multilateral control. The Agency helps countries improve their border controls, strengthen physical protection of nuclear material and radioactive sources and enhance nuclear security at major public events, such as the Beijing Olympic Games this summer. Effective nuclear

  6. A comparative evaluation of genome assembly reconciliation tools.

    Science.gov (United States)

    Alhakami, Hind; Mirebrahim, Hamid; Lonardi, Stefano

    2017-05-18

    The majority of eukaryotic genomes are unfinished due to the algorithmic challenges of assembling them. A variety of assembly and scaffolding tools are available, but it is not always obvious which tool or parameters to use for a specific genome size and complexity. It is, therefore, common practice to produce multiple assemblies using different assemblers and parameters, then select the best one for public release. A more compelling approach would allow one to merge multiple assemblies with the intent of producing a higher quality consensus assembly, which is the objective of assembly reconciliation. Several assembly reconciliation tools have been proposed in the literature, but their strengths and weaknesses have never been compared on a common dataset. We fill this need with this work, in which we report on an extensive comparative evaluation of several tools. Specifically, we evaluate contiguity, correctness, coverage, and the duplication ratio of the merged assembly compared to the individual assemblies provided as input. None of the tools we tested consistently improved the quality of the input GAGE and synthetic assemblies. Our experiments show an increase in contiguity in the consensus assembly when the original assemblies already have high quality. In terms of correctness, the quality of the results depends on the specific tool, as well as on the quality and the ranking of the input assemblies. In general, the number of misassemblies ranges from being comparable to the best of the input assembly to being comparable to the worst of the input assembly.

  7. Evaporative Optical Marangoni Assembly: Tailoring the Three-Dimensional Morphology of Individual Deposits of Nanoparticles from Sessile Drops.

    Science.gov (United States)

    Anyfantakis, Manos; Varanakkottu, Subramanyan Namboodiri; Rudiuk, Sergii; Morel, Mathieu; Baigl, Damien

    2017-10-25

    We have recently devised the evaporative optical Marangoni assembly (eOMA), a novel and versatile interfacial flow-based method for directing the deposition of colloidal nanoparticles (NPs) on solid substrates from evaporating sessile drops along desired patterns using shaped UV light. Here, we focus on a fixed UV spot irradiation resulting in a cylinder-like deposit of assembled particles and show how the geometrical features of the single deposit can be tailored in three dimensions by simply adjusting the optical conditions or the sample composition, in a quantitative and reproducible manner. Sessile drops containing cationic NPs and a photosensitive surfactant at various concentrations are allowed to evaporate under a single UV beam with a diameter much smaller than that of the drop. After complete evaporation, the geometrical characteristics of the NP deposits are precisely assessed using optical profilometry. We show that both the volume and the radial size of the light-directed NP deposit can be adjusted by varying the diameter or the intensity of the UV beam or alternatively by changing the concentration of the photosensitive surfactant. Notably, in all these cases, the deposits display an almost constant median height corresponding to a few layers of particles. Moreover, both the radial and the axial extent of the patterns are tuned by changing the NP concentration. These results are explained by the correlation among the strength of Marangoni flow, the particle trapping efficiency, and the volume of the deposit, and by the role of evaporation-driven flow in strongly controlling the deposit height. Finally, we extend the versatility of eOMA by demonstrating that NPs down to 30 nm in diameter can be effectively patterned on glass or polymeric substrates.

  8. A generalized public goods game with coupling of individual ability and project benefit

    Science.gov (United States)

    Zhong, Li-Xin; Xu, Wen-Juan; He, Yun-Xin; Zhong, Chen-Yang; Chen, Rong-Da; Qiu, Tian; Shi, Yong-Dong; Ren, Fei

    2017-08-01

    Facing a heavy task, any single person can only make a limited contribution and team cooperation is needed. As one enjoys the benefit of the public goods, the potential benefits of the project are not always maximized and may be partly wasted. By incorporating individual ability and project benefit into the original public goods game, we study the coupling effect of the four parameters, the upper limit of individual contribution, the upper limit of individual benefit, the needed project cost and the upper limit of project benefit on the evolution of cooperation. Coevolving with the individual-level group size preferences, an increase in the upper limit of individual benefit promotes cooperation while an increase in the upper limit of individual contribution inhibits cooperation. The coupling of the upper limit of individual contribution and the needed project cost determines the critical point of the upper limit of project benefit, where the equilibrium frequency of cooperators reaches its highest level. Above the critical point, an increase in the upper limit of project benefit inhibits cooperation. The evolution of cooperation is closely related to the preferred group-size distribution. A functional relation between the frequency of cooperators and the dominant group size is found.

  9. Designing & Evaluating General Individual Preconception Care : - The Ready for a Baby program -

    NARCIS (Netherlands)

    S. Temel (Sevilay)

    2016-01-01

    markdownabstractPreconception Care (PCC) entails risk assessment, health promotion, counselling, and intervention. The Dutch Health Council categorized PCC into general PCC targeted at couples planning a pregnancy within the general population, and specialist PCC for couples with a known or

  10. Academic Advising in Individualized Major Programs: Promoting the Three I's of General Education

    Science.gov (United States)

    Egan, Kevin

    2015-01-01

    Academic advisers play an important role in making general education relevant and meaningful to student learning by helping to facilitate the three I's of general education: inter-disciplinarity, integration, and intentionality. This essay argues that the "advising as learning" model of academic advising embodies the kinds of advising…

  11. A general design strategy for block copolymer directed self-assembly patterning of integrated circuits contact holes using an alphabet approach.

    Science.gov (United States)

    Yi, He; Bao, Xin-Yu; Tiberio, Richard; Wong, H-S Philip

    2015-02-11

    Directed self-assembly (DSA) is a promising lithography candidate for technology nodes beyond 14 nm. Researchers have shown contact hole patterning for random logic circuits using DSA with small physical templates. This paper introduces an alphabet approach that uses a minimal set of small physical templates to pattern all contacts configurations on integrated circuits. We illustrate, through experiments, a general and scalable template design strategy that links the DSA material properties to the technology node requirements.

  12. Design and assembly of ternary Pt/Re/SnO2 NPs by controlling the zeta potential of individual Pt, Re, and SnO2 NPs

    Science.gov (United States)

    Drzymała, Elżbieta; Gruzeł, Grzegorz; Pajor-Świerzy, Anna; Depciuch, Joanna; Socha, Robert; Kowal, Andrzej; Warszyński, Piotr; Parlinska-Wojtan, Magdalena

    2018-05-01

    In this study Pt, Re, and SnO2 nanoparticles (NPs) were combined in a controlled manner into binary and ternary combinations for a possible application for ethanol oxidation. For this purpose, zeta potentials as a function of the pH of the individual NPs solutions were measured. In order to successfully combine the NPs into Pt/SnO2 and Re/SnO2 NPs, the solutions were mixed together at a pH guaranteeing opposite zeta potentials of the metal and oxide NPs. The individually synthesized NPs and their binary/ternary combinations were characterized by Fourier transform infrared spectroscopy (FTIR) and scanning transmission electron microscopy (STEM) combined with energy dispersive X-ray spectroscopy (EDS) analysis. FTIR and XPS spectroscopy showed that the individually synthesized Pt and Re NPs are metallic and the Sn component was oxidized to SnO2. STEM showed that all NPs are well crystallized and the sizes of the Pt, Re, and SnO2 NPs were 2.2, 1.0, and 3.4 nm, respectively. Moreover, EDS analysis confirmed the successful formation of binary Pt/SnO2 and Re/SnO2 NP, as well as ternary Pt/Re/SnO2 NP combinations. This study shows that by controlling the zeta potential of individual metal and oxide NPs, it is possible to assemble them into binary and ternary combinations. [Figure not available: see fulltext.

  13. Cost-effectiveness analysis of HPV vaccination: comparing the general population with socially vulnerable individuals.

    Science.gov (United States)

    Han, Kyu-Tae; Kim, Sun Jung; Lee, Seo Yoon; Park, Eun-Cheol

    2014-01-01

    After the WHO recommended HPV vaccination of the general population in 2009, government support of HPV vaccination programs was increased in many countries. However, this policy was not implemented in Korea due to perceived low cost-effectiveness. Thus, the aim of this study was to analyze the cost-utility of HPV vaccination programs targeted to high risk populations as compared to vaccination programs for the general population. Each study population was set to 100,000 people in a simulation study to determine the incremental cost-utility ratio (ICUR), then standard prevalence rates, cost, vaccination rates, vaccine efficacy, and the Quality-Adjusted Life-Years (QALYs) were applied to the analysis. In addition, sensitivity analysis was performed by assuming discounted vaccination cost. In the socially vulnerable population, QALYs gained through HPV vaccination were higher than that of the general population (General population: 1,019, Socially vulnerable population: 5,582). The results of ICUR showed that the cost of HPV vaccination was higher for the general population than the socially vulnerable population. (General population: 52,279,255 KRW, Socially vulnerable population: 9,547,347 KRW). Compared with 24 million KRW/QALYs as the social threshold, vaccination of the general population was not cost-effective. In contrast, vaccination of the socially vulnerable population was strongly cost-effective. The results suggest the importance and necessity of government support of HPV vaccination programs targeted to socially vulnerable populations because a targeted approach is much more cost-effective. The implementation of government support for such vaccination programs is a critical strategy for decreasing the burden of HPV infection in Korea.

  14. The impact of generalized and institutional trust on donating to activist, leisure, and interest organizations: individual and contextual effects

    NARCIS (Netherlands)

    Evers, A.B.; Gesthuizen, M.J.W.

    2011-01-01

    In this paper, we answer the question as to what extent donating to activist, interest, and leisure organizations is affected by both individual and national levels of generalized and institutional trust. We use the European Social Survey 2002 to estimate multilevel random intercept models, based on

  15. Elevated C-reactive protein and late-onset bipolar disorder in 78 809 individuals from the general population

    DEFF Research Database (Denmark)

    Wium-Andersen, Marie Kim; Ørsted, David Dynnes; Nordestgaard, Børge Grønne

    2016-01-01

    is causal. METHOD: We performed cross-sectional and prospective analyses with a median follow-up time of 5.9 years (interquartile range: 4.4-7.6) in 78 809 individuals from the general population, and used genetic variants influencing CRP levels to perform a Mendelian randomisation study. RESULTS: Elevated...

  16. 47 CFR 90.615 - Individual channels available in the General Category in 806-824/851-869 MHz band.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Individual channels available in the General Category in 806-824/851-869 MHz band. 90.615 Section 90.615 Telecommunication FEDERAL COMMUNICATIONS... Critical Infrastructure Industry Categories from three to five years after the release of a public notice...

  17. Vitamin D, Hypertension, and Ischemic Stroke in 116 655 Individuals From the General Population

    DEFF Research Database (Denmark)

    Afzal, Shoaib; Nordestgaard, Børge G

    2017-01-01

    Observational studies indicate that low concentrations of plasma 25-hydroxyvitamin D (25(OH)D) are associated with high blood pressure, hypertension, and ischemic stroke. However, whether these associations are causal remain unknown. A total of 116 655 white individuals of Danish descent from...

  18. Peripheral blood leukocyte telomere length and mortality among 64,637 individuals from the general population

    DEFF Research Database (Denmark)

    Rode, Line; Nordestgaard, Børge G; Bojesen, Stig E

    2015-01-01

    BACKGROUND: Short telomeres in peripheral blood leukocytes are associated with older age and age-related diseases. We tested the hypotheses that short telomeres are associated with both increased cancer mortality and all-cause mortality. METHODS: Individuals (n = 64637) were recruited from 1991...

  19. Individuals with Mental Retardation and the Criminal Justice System: The View from States' Attorneys General.

    Science.gov (United States)

    McAfee, James K.; Gural, Michele

    1988-01-01

    Results of a survey of state attorneys general (N=46) found that, with few exceptions, identification of persons with mental retardation in criminal justice is neither systematic nor probable. Protections lie in statutes pertaining to mental illness rather than to mental retardation. (Author/DB)

  20. Five Elements of Normative Ethics - A General Theory of Normative Individualism

    OpenAIRE

    Pfordten, Dietmar

    2012-01-01

    The article tries to inquire a third way in normative ethics between consequentialism or utilitarianism and deontology or Kantianism. To find such a third way in normative ethics, one has to analyze the elements of these classical theories and to look if they are justified. In this article it is argued that an adequate normative ethics has to contain the following five elements: (1) normative individualism, i. e., the view that in the last instance moral norms and values can only be justified...

  1. Statement to Sixty-Eighth Regular Session of United Nations General Assembly, 5 November 2013, New York, USA

    International Nuclear Information System (INIS)

    Amano, Y.

    2013-01-01

    IAEA is working closely with the African Union to help create tsetse- free zones, using the Sterile Insect Technique and other methods. The Sterile Insect Technique is essentially a form of contraception for tsetse flies. Male flies which are mass- produced in special facilities are sterilised using radiation. The sterile males are then released into affected areas, where they mate with wild females. These do not produce offspring. This technique can eventually eradicate entire populations of tsetse flies, as happened in Zanzibar in 1999. In recent years, significant progress has been made suppressing tsetse flies in Ethiopia and Senegal by using the Sterile Insect Technique and conventional methods. Together with 13 countries in the Sahel region of Africa, the IAEA is working to alleviate severe water shortages which have caused a humanitarian crisis. Underground aquifers that store fresh water span national borders in the region. The IAEA helps countries to measure and monitor these shared fresh water supplies suing nuclear isotopic techniques. This provides the data to enable policy-makers to develop a strategic plan for managing these vital resources. Responding to concerns among Member States about climate change, the new Ocean Acidification International Coordination Centre started work this year at the IAEA Environmental Laboratories in Monaco. This enhances our efforts to promote a comprehensive approach to the study, monitoring and protection of marine, coastal and terrestrial ecosystems. The annual IAEA Scientific Forum in September was entitled The Blue Planet: Nuclear Applications for a Sustainable Marine Environment. I informed the General Assembly a year ago about my plans to modernize the eight IAEA nuclear applications laboratories near Vienna. These do essential work in assisting with the transfer of nuclear science and technology to developing countries in areas such as human and animal health, food security and safety, agriculture, and environmental

  2. What the general practitioner (MD) should know about medical handling of overexposed individuals

    International Nuclear Information System (INIS)

    1986-02-01

    This publication is aimed at doctors, paramedics and nursing personnel who, especially in small communities and in developing countries, but also in highly industrialized countries can be faced with overexposures and have the task of taking the first decisions about the victims. It provides basic information about radioactivity, radiation and radiation accidents, radiation burns, external and internal contamination by radioactive materials, acute radiation syndrome and the late effects of radiation. In addition, a list of recommended equipment and medications sufficient to allow first aid treatment of acute radiation exposed or contaminated individuals is given

  3. What the general practitioner (MD) should know about medical handling of overexposed individuals

    International Nuclear Information System (INIS)

    1989-01-01

    This publication is aimed at doctors, paramedics and nursing personnel who especially in small communities and in developing countries, but also in highly industrialized countries can be faced with overexposures and have the task of taking the first decisions about the victims. It provides basic information about radioactivity, radiation and radiation accidents, radiation burns, external and internal contamination by radioactive materials, acute radiation syndrome and the late effects of radiation. In addition, a list of recommended equipment and medications sufficient to allow first aid treatment of acute radiation exposed or contaminated individuals is given. 7 tabs

  4. Long telomeres and cancer risk among 95 568 individuals from the general population

    DEFF Research Database (Denmark)

    Rode, Line; Nordestgaard, Børge G; Bojesen, Stig E

    2016-01-01

    BACKGROUND: Results regarding telomere length and cancer risk are conflicting. We tested the hypothesis that long telomeres are associated with increased risk of any cancer and specific cancer types in genetic and observational analyses. METHODS: Individuals (N = 95 568) from the Copenhagen City...... specific cancer types. We conducted Cox regression analyses and logistic regression analyses. The three genotypes were combined as an allele sum. RESULTS: Telomere length increased 67 base-pairs [95% confidence interval (CI) 61-74] per allele. In logistic regression models, the per-allele odds ratio (OR...

  5. General intelligence in another primate: individual differences across cognitive task performance in a New World monkey (Saguinus oedipus.

    Directory of Open Access Journals (Sweden)

    Konika Banerjee

    Full Text Available BACKGROUND: Individual differences in human cognitive abilities show consistently positive correlations across diverse domains, providing the basis for the trait of "general intelligence" (g. At present, little is known about the evolution of g, in part because most comparative studies focus on rodents or on differences across higher-level taxa. What is needed, therefore, are experiments targeting nonhuman primates, focusing on individual differences within a single species, using a broad battery of tasks. To this end, we administered a large battery of tasks, representing a broad range of cognitive domains, to a population of captive cotton-top tamarin monkeys (Saguinus oedipus. METHODOLOGY AND RESULTS: Using a Bayesian latent variable model, we show that the pattern of correlations among tasks is consistent with the existence of a general factor accounting for a small but significant proportion of the variance in each task (the lower bounds of 95% Bayesian credibility intervals for correlations between g and task performance all exceed 0.12. CONCLUSION: Individual differences in cognitive abilities within at least one other primate species can be characterized by a general intelligence factor, supporting the hypothesis that important aspects of human cognitive function most likely evolved from ancient neural substrates.

  6. Measuring the individual benefit of a medical or behavioral treatment using generalized linear mixed-effects models.

    Science.gov (United States)

    Diaz, Francisco J

    2016-10-15

    We propose statistical definitions of the individual benefit of a medical or behavioral treatment and of the severity of a chronic illness. These definitions are used to develop a graphical method that can be used by statisticians and clinicians in the data analysis of clinical trials from the perspective of personalized medicine. The method focuses on assessing and comparing individual effects of treatments rather than average effects and can be used with continuous and discrete responses, including dichotomous and count responses. The method is based on new developments in generalized linear mixed-effects models, which are introduced in this article. To illustrate, analyses of data from the Sequenced Treatment Alternatives to Relieve Depression clinical trial of sequences of treatments for depression and data from a clinical trial of respiratory treatments are presented. The estimation of individual benefits is also explained. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

  7. Risk Factors for Chronic Cough Among 14,669 Individuals From the General Population

    DEFF Research Database (Denmark)

    Çolak, Yunus; Nordestgaard, Børge G; Laursen, Lars C

    2017-01-01

    population was 4% overall and 3% in never smokers, 4% in former smokers, and 8% in current smokers. Median score of the LCQ was 5.8 (25th-75th percentile, 5.0-6.3) for physical domain, 5.6 (25th-75th percentile, 4.6-6.3) for psychologic domain, 6.3 (25th-75th percentile, 5.5-6.8) for social domain, and 17.......3 (25th- 75th percentile, 15.4-18.9) in total. At the level of the individual, age-adjusted ORs for the three top-ranked risk factors were 5.0 (95% CI, 1.4-18) for bronchiectasis, 2.6 (95% CI, 1.7-3.9) for asthma and 2.3 (95% CI, 1.5-3.4) for gastroesophageal reflux disease in never smokers, 7.1 (95% CI......, 19%), asthma (PAR, 10%), and gastroesophageal reflux disease (PAR, 8%) in never smokers; abdominal obesity (PAR, 20%), low income (PAR, 20%), and asthma (PAR, 13%) in former smokers; and airflow limitation (PAR, 23%) in current smokers. CONCLUSIONS: Risk factors for chronic cough differ at the level...

  8. General Mechanism of Morphology Transition and Spreading Area-dependent Phase Diagram of Block Copolymer Self-assembly at the Air/Water Interface

    Science.gov (United States)

    Kim, Dong Hyup; Kim, So Youn

    Block copolymers (BCPs) can be self-assembled forming periodic nanostructures, which have been employed in many applications. While general agreements exist for the phase diagrams of BCP self-assembly in bulk or thin films, a fundamental understanding of BCP structures at the air/water interface still remain elusive. The current study explains morphology transition of BCPs with relative fraction of each block at the air/water interface: block fraction is the only parameter to control the morphology. In this study, we show morphology transitions from spherical to cylindrical and planar structures with neat polystyrene-b-poly(2-vinylpyridine) (PS-b-P2VP) via reducing the spreading area of BCP solution at the air/water interface. For example, PS-b-P2VP in a fixed block fraction known to form only spheres can experience sphere to cylinder or lamellar transitions depending on the spreading area at the air/water interface. Suggesting a new parameter to control the interfacial assembly of BCPs, a complete phase diagram is drawn with two paramters: relative block fraction and spreading area. We also explain the morphology transition with the combinational description of dewetting mechanism and spring effect of hydrophilic block.

  9. Combined use of FRN and CSSI techniques: SWMCN Laboratory PICO experience during the European Geosciences Union (EGU) General Assembly 2015, Vienna, Austria

    International Nuclear Information System (INIS)

    Mabit, L.; Toloza, A.; Resch, C.

    2016-01-01

    The European Geosciences Union (EGU) General Assembly 2015 that took place at the Austria Center of Vienna, from 12-17 April 2015, was a big success with 4870 oral, 8489 poster, and 705 PICO (Presenting Interactive COntent™) presentations as well as 11837 scientists attending from 108 different countries. This year again, the activities of the SWMCN Laboratory were well represented with 3 PICO presentations during the SSS12.10 session (i.e. Soil and sediment tracing techniques for understanding environmental processes)

  10. Forty Years of the United Nations General Assembly Resolution 3379 (XXX) on Zionism and Racism: the Brazilian Vote as an instance of United States - Brazil Relations

    OpenAIRE

    SANTOS, NORMA BREDA DOS; UZIEL, EDUARDO

    2015-01-01

    Abstract In 1975, Brazil voted in favor of the United Nations General Assembly resolution 3379 (XXX), equating Zionism with a form of racism. Focusing on the decision-making process of president Ernesto Geisel's (1974-1979) foreign policy, "responsible pragmatism", this article discusses how the ultimate decision to vote in favor of resolution was taken taking into account mainly US-Brazil relationship. Resumo Em 1975, o Brasil votou a favor da resolução da Assembleia Geral das Nações Unid...

  11. General Linker Diversification Approach to Bivalent Ligand Assembly: Generation of an Array of Ligands for the Cation-Independent Mannose 6-Phosphate Receptor.

    Science.gov (United States)

    Fei, Xiang; Zavorka, Megan E; Malik, Guillaume; Connelly, Christopher M; MacDonald, Richard G; Berkowitz, David B

    2017-08-18

    A generalized strategy is presented for the rapid assembly of a set of bivalent ligands with a variety of linking functionalities from a common monomer. Herein, an array of phosphatase-inert mannose-6-phosphonate-presenting ligands for the cation-independent-mannose 6-phosphate receptor (CI-MPR) is constructed. Receptor binding affinity varies with linking functionality-the simple amide and 1,5-triazole(tetrazole) being preferred over the 1,4-triazole. This approach is expected to find application across chemical biology, particularly in glycoscience, wherein multivalency often governs molecular recognition.

  12. Protecting the privacy of individual general practice patient electronic records for geospatial epidemiology research.

    Science.gov (United States)

    Mazumdar, Soumya; Konings, Paul; Hewett, Michael; Bagheri, Nasser; McRae, Ian; Del Fante, Peter

    2014-12-01

    General practitioner (GP) practices in Australia are increasingly storing patient information in electronic databases. These practice databases can be accessed by clinical audit software to generate reports that inform clinical or population health decision making and public health surveillance. Many audit software applications also have the capacity to generate de-identified patient unit record data. However, the de-identified nature of the extracted data means that these records often lack geographic information. Without spatial references, it is impossible to build maps reflecting the spatial distribution of patients with particular conditions and needs. Links to socioeconomic, demographic, environmental or other geographically based information are also not possible. In some cases, relatively coarse geographies such as postcode are available, but these are of limited use and researchers cannot undertake precision spatial analyses such as calculating travel times. We describe a method that allows researchers to implement meaningful mapping and spatial epidemiological analyses of practice level patient data while preserving privacy. This solution has been piloted in a diabetes risk research project in the patient population of a practice in Adelaide. The method offers researchers a powerful means of analysing geographic clinic data in a privacy-protected manner. © 2014 Public Health Association of Australia.

  13. Power Lawn Mower Assembler (agric. equip.) 6-94.352--Technical Report on Standardization of the General Aptitude Test Battery.

    Science.gov (United States)

    Manpower Administration (DOL), Washington, DC. U.S. Training and Employment Service.

    The United States Training and Employment Service General Aptitude Test Battery (GATB), first published in 1947, has been included in a continuing program of research to validate the tests against success in many different occupations. The GATB consists of 12 tests which measure nine aptitudes: General Learning Ability; Verbal Aptitude; Numerical…

  14. Statement to the 36th session of the General Conference of the International Atomic Energy Agency 21 September 1992; Statement to the 47th session of the United Nations General Assembly 21 October 1992

    International Nuclear Information System (INIS)

    Blix, H.

    1993-01-01

    IAEA Director General, Hans Blix, in his statements to the 47th session of the United Nations General Assembly and to the 36th session of the General Conference of the IAEA, reminded that 1992 marks the fiftieth anniversary of controlled nuclear fission and the thirty-fifth anniversary of the IAEA. He specially commented on the various measures taken during the past year to strengthen the IAEA's safeguards system as a part of the challenge to reduce the risk of a further spread of nuclear weapons. He also discussed the role of the IAEA in the fields of nuclear safety, nuclear waste, transfer of technology and assistance to developing countries and the financing and management of the Agency within the UN system

  15. Dynamic behaviour of diagnostic assemblies

    International Nuclear Information System (INIS)

    Pecinka, L.

    1980-01-01

    The methodology is shown of calculating the frequency spectrum of a diagnostic assembly. The oscillations of the assembly as a whole, of a fuel rod bundle, the assembly jacket and of the individual rods in the bundle were considered. The manufacture is suggested of a model assembly which would be used for testing forced vibrations using an experimental water loop. (M.S.)

  16. Examining Individual Differences in Interpersonal Influence: On the Psychometric Properties of the Generalized Opinion Leadership Scale (GOLS).

    Science.gov (United States)

    Batinic, Bernad; Appel, Markus; Gnambs, Timo

    2016-01-01

    Opinion leadership describes an individual's tendency to informally influence others' attitudes and overt behaviors. In contrast to contemporary views of opinion leadership as a highly domain-specific trait, this paper introduces a multi-faceted personality trait, generalized opinion leadership (GOL) that characterizes exceptionally influential individuals independent of a specific subject area. Two studies report on the psychometric properties of a scale to assess GOL. Study 1 is based on three independent samples (N = 1,575, N = 1,275, and N = 231) and demonstrates the factorial structure of the instrument and its measurement invariance across sex, age, and educational levels. Study 2 (N = 310) analyzes multitrait-multiinformant data to highlight the scale's discriminant validity with regard to innovativeness and trendsetting.

  17. Nupec thermal hydraulic test to evaluate post-DNB characteristics for PWR fuel assemblies (1. general test plan and results)

    International Nuclear Information System (INIS)

    Norio, Kono; Kenji, Murai; Kaichiro, Misima; Takayuki, Suemura; Yoshiei, Akiyama; Keiichi, Hori

    2001-01-01

    In the present thermal hydraulic design of Pressurized Water Reactor (PWR), a departure from nucleate boiling (DNB) under anticipated transient conditions is not allowed. However, it is recognized that the DNB dose not cause a fuel rod failure immediately, and a suitable reactor trip can prevent the core from severe damages. If the fuel rod temperature under the post-DNB conditions can be accurately evaluated, the potentially existing margin in the present design method will be quantitatively assessed. To establish the heat transfer evaluation method on post-DNB event for PWR thermal hydraulic design, Nuclear Power Engineering Corporation (NUPEC) started a program, NUPEC Thermal Hydraulic Test to Evaluate Post-DNB Characteristics for PWR Fuel Assemblies (NUPEC-TH-P), in 1995 (hereinafter the year means fiscal year) under the sponsorship of Ministry of Economy, Trade and industry (METI). This program is now under going until 2001. This paper is to show the overall plan and the status of NUPEC-TH-P. (authors)

  18. Letter dated 18 October 1999 from the Permanent Representative of China to the United Nations addressed to the Secretary-General. Uphold the ABM Treaty, push forward nuclear disarmament process and promote international peace and security. General Assembly. 54. session. First Committee. Agenda item 76. General and complete disarmament

    International Nuclear Information System (INIS)

    1999-01-01

    The document reproduces the text of the letter dated 18 October 1999 sent to the Secretary-General by the Permanent Representative of China to the United Nations in connection with the agenda item 76 (General and complete disarmament) of the 54th session of the General Assembly, First Committee. The letter expresses the position of the Chinese delegation concerning the proposed amendment of the Anti-Ballistic Missile Treaty (ABM Treaty)

  19. Statement to Sixty-Sixth Regular Session of United Nations General Assembly, 1 November 2011, New York, USA

    International Nuclear Information System (INIS)

    Amano, Y.

    2011-01-01

    Since March 11 this year, the IAEA has been working on the very serious accident at the Fukushima Daiichi nuclear power plant in Japan. I will therefore begin by reflecting on that accident and its aftermath, before talking about other aspects of our work. As you know, the accident at Fukushima Daiichi was caused by an earthquake and tsunami of unprecedented severity, which struck eastern Japan on 11 March. The IAEA has been doing everything it can to help Japan bring the situation at the site under control and to mitigate the consequences of the accident. The Japanese authorities and the operator have been working steadily to stabilise the reactors and are now confident that so-called ''cold shutdown'' will be achieved by the end of the year. The IAEA will continue to assist Japan as it tackles the challenging work of decontamination and remediation in the affected areas. In September, our 151 Member States endorsed a 12-point IAEA Action Plan on Nuclear Safety. Key elements of the Action Plan include an agreement that all countries with nuclear power programmes will promptly undertake what have become known as ''stress tests'' of their nuclear power plants. The framework for expert peer reviews by the IAEA of operational safety at nuclear power plants is being strengthened. The effectiveness of national and international emergency preparedness and response arrangements, IAEA safety standards and relevant international conventions will also be reviewed. The Action Plan represents a significant step forward. It is vital that it is fully implemented in all countries with nuclear power and that the right lessons are learned from the Fukushima Daiichi accident. I would like to express my gratitude to Secretary-General Ban Ki-Moon for convening a High-Level Meeting on Nuclear Safety and Security in September and bringing UN-system organizations together to collaborate on this issue. Nuclear safety is the responsibility of individual countries, but the IAEA - the only

  20. Distrust as a Disease-Avoidance Strategy:Individual Differences in Disgust Sensitivity Regulate Generalized Social Trust

    Directory of Open Access Journals (Sweden)

    Lene Aarøe

    2016-07-01

    Full Text Available Throughout human evolutionary history, cooperative contact with others has been fundamental for human survival. At the same time, social contact has been a source of threats. In this article, we focus on one particular viable threat, communicable disease, and investigate how motivations to avoid pathogens influence people's propensity to interact and cooperate with others, as measured by individual differences in generalized social trust. While extant studies on pathogen avoidance have argued that such motivations should prompt people to avoid interactions with outgroups specifically, we argue that these motivations should prompt people to avoid others more broadly. Empirically, we utilise two convenience samples and a large nationally representative sample of US citizens to demonstrate the existence of a robust and replicable effect of individual differences in pathogen disgust sensitivity on generalized social trust. We furthermore compare the effects of pathogen disgust sensitivity on generalised social trust and outgroup prejudice and explore whether generalised social trust to some extent constitutes a pathway between pathogen avoidance motivations and prejudice.

  1. Remnant Cholesterol and Myocardial Infarction in Normal Weight, Overweight, and Obese Individuals from the Copenhagen General Population Study

    DEFF Research Database (Denmark)

    Varbo, Anette; Freiberg, Jacob J; Nordestgaard, Børge G

    2018-01-01

    BACKGROUND: We tested whether high remnant cholesterol is associated with high myocardial infarction risk, independent of whether an individual is normal weight, overweight, or obese. METHODS: A total of 106216 individuals from the Copenhagen General Population Study were followed for up to 11......) of obese). RESULTS: Median calculated remnant cholesterol was 0.40 mmol/L [interquartile range (IQR), 0.30-0.55 mmol/L] [15 mg/dL (12-21 mg/dL)] for underweight, 0.50 mmol/L (IQR, 0.37-0.71 mmol....../L) [19 mg/dL (14-27 mg/dL)] for normal weight, 0.70 mmol/L (IQR, 0.49-1.00 mmol/L) [27 mg/dL (19-39 mg/dL)] for overweight, and 0.85 mmol/L (IQR, 0.61-1.20 mmol/L) [(33 mg/dL (24-46 mg/dL)] for obese individuals. On continuous scales, remnant cholesterol was positively correlated with BMI until reaching...

  2. The data submitted by the United Kingdom to the United Nations Scientific Committee on the Effects of Atomic Radiation for the 1977 report to the General Assembly

    CERN Document Server

    Taylor, F E; Webb, G A M

    1976-01-01

    The United Nations Scientific Committee on the Effects of Atomic Radiation (UNSCEAR) was established by the General Assembly in 1955 to report on the exposure of man to ionising radiation. In the subsequent twenty years the Committee has covered most aspects of the subject with repeated reviews of the levels of exposure from fallout due to weapons testing. The Committee is currently preparing a further report on doses from all sources and an evaluation of their biological effects. This is expected to be published in 1977. To aid it in compiling this report the Committee requested Member States of the UN to submit national data on a wide range of sources of exposure. The Board was asked by the Foreign and Commonwealth Office to collate the information requested from the United Kingdom. Data were available in the scientific literature on some topics, such as medical irradiation and environmental radioactivity. On some other topics, particularly occupational exposure, data have been collected but seldom publishe...

  3. Immediate tasks in realization of 52-53 Sessions of United Nations Organization General Assembly resolution on Semipalatinsk nuclear test site

    International Nuclear Information System (INIS)

    Ibraev, S.

    2000-01-01

    The author points out, that ecological heritage of Semipalatinsk test site is not studied, scattered investigations does not give objective assessment about radiation situation in the region. Only operations of close down of wells on the base of inter-state agreement between Republic of Kazakhstan and the United States of America were carried out. There are following main rehabilitation measures on liquidation of nuclear tests consequences in the region: study, deactivation and re-cultivation of populated territories; study of radioactive contamination level in underground waters and definition radionuclides migration by biological chain for taking preventative measures. It is noted, that citizens of the region with gratitude took solution of 52-53 Sessions of United Nations Organization General Assembly 'On liquidation of nuclear tests consequences on Semipalatinsk nuclear test site

  4. Easy and General Synthesis of Large-Sized Mesoporous Rare-Earth Oxide Thin Films by 'Micelle Assembly'.

    Science.gov (United States)

    Li, Yunqi; Bastakoti, Bishnu Prasad; Imura, Masataka; Dai, Pengcheng; Yamauchi, Yusuke

    2015-12-01

    Large-sized (ca. 40 nm) mesoporous Er2O3 thin films are synthesized by using a triblock copolymer poly(styrene-b-2-vinyl pyridine-b-ethylene oxide) (PS-b-P2VP-b-PEO) as a pore directing agent. Each block makes different contributions and the molar ratio of PVP/Er(3+) is crucial to guide the resultant mesoporous structure. An easy and general method is proposed and used to prepare a series of mesoporous rare-earth oxide (Sm2O3, Dy2O3, Tb2O3, Ho2O3, Yb2O3, and Lu2O3) thin films with potential uses in electronics and optical devices. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. YKL-40 and Alcoholic Liver and Pancreas Damage and Disease in 86258 Individuals from the General Population

    DEFF Research Database (Denmark)

    Kjaergaard, Alisa D; Bojesen, Stig E; Nordestgaard, Børge G

    2014-01-01

    BACKGROUND: We tested the hypothesis that observationally and genetically increased YKL-40 concentrations are associated with alcoholic liver and pancreas damage and disease. METHODS: We performed cohort and mendelian randomization in 86,258 individuals from the Danish general population......, with measured concentrations of plasma YKL-40 (n = 21 646) and CHI3L1 rs4950928 genotype (n = 84 738). RESULTS: Increased YKL-40 was associated with increased alanine aminotransferase, bilirubin, alkaline phosphatase, γ-glutamyl transferase, erythrocyte mean corpuscular volume, C-reactive protein...... alcoholic liver disease, 4.1 (1.7-10) for alcoholic pancreatitis, and 3.4 (1.9-6.1) for any pancreatitis. CHI3L1 rs4950928 genotype explained 14% of the variation in plasma YKL-40 concentrations but was not associated with alcoholic liver and pancreas damage or disease. A doubling in YKL-40 concentrations...

  6. Socio-demographic Characteristics of Individuals with History of Crack Cocaine Use in the US General Population.

    Science.gov (United States)

    Yur'yev, Andriy; Akerele, Evaristo

    2016-11-01

    This study explores socio-demographic characteristics of individuals with history of crack cocaine use. Data from the 29th Round of General Social Survey was used. Respondents with history of crack cocaine use were compared to respondents without such history. T test was applied to identify differences between groups. Approximately 6 % of respondents reported lifetime history of crack cocaine use. Groups with and without history of crack cocaine use differed significantly in gender, marital status, education, income distribution, employment, health perception, family and financial satisfaction, criminal history, happiness, sexual history, history of injection drug use, and HIV testing. There were no significant differences for race. The study provides insights that could improve identification and prevention of substance use disorders.

  7. The Tangible Economic benefits of the 20th Session of the United Nations World Tourism Organisation General Assembly to Victoria Falls, Zimbabwe

    Directory of Open Access Journals (Sweden)

    Cleopas Njerekai

    2014-01-01

    Full Text Available This paper is a documentation of the tangible economic benefits that accrued to the town of Victoria Falls, Zimbabwe, by co-hosting with Zambia, the 20th session of the United Nations World Tourism Organisation (UNWTO General Assembly (GA in 2013. The paper intends to offset speculations, half-truths and exaggerations on the tangible economic benefits of the event to the town and to contribute significantly to the scanty existing literature on the impact of these events to developing countries. A single case study research design focusing on the town was adopted for this study. The study participants to the research included tourism and hospitality organizations, the Victoria Falls municipality authorities, service providers and Victoria Falls town residents. Researcher administered questionnaires, semi-structured interviews and observation check lists were used to collect the data. In general, although the GA brought some significant transformative effects to the town of Victoria Falls in terms of employment creation, infrastructural development, revenue generation and the country's image, future host cities and countries to this event should mobilize adequate funds for the event, time it appropriately, ensure a fair spread of the benefits to various sectors and put up structures that do not turn into white elephants soon after the event.

  8. A comparison of individual and social time trade-off values for health states in the general population

    DEFF Research Database (Denmark)

    Burström, Kristina; Johannesson, Magnus; Diderichsen, Finn

    2005-01-01

    and a rating scale (RS) question were included (n=2549 for all three questions). The mean TTO (EQ-5D) value was 0.943 (0.890) in the youngest age-group and 0.699 (0.733) in the oldest age-group. The difference between TTO and EQ-5D values was greater in more severe health status groups was. The same equation......This study aimed to compare directly elicited individual time trade-off (TTO) values in a general population sample with the social values derived using the UK EQ-5D index tariff. In the Stockholm County 1998 postal Public Health Survey (n=4950, 20-88 years), the EQ-5D self-classifier, a TTO...... for the EQ-5D dimensions (pdiffer systematically and that the difference is greater the more severe the health status is. The social EQ-5D index tariff may also underestimate the severity in health status at older ages; age appears...

  9. Self-reported prevalence and severity of xerostomia and its related conditions in individuals attending hospital for general health examinations.

    Science.gov (United States)

    Lee, E; Lee, Y-H; Kim, W; Kho, H-S

    2014-04-01

    The aim of this study was to investigate the prevalence, severity, and relationships between xerostomia and its related symptoms in individuals who attended hospital for general health examinations. Participants included 883 men and 618 women aged between 30 and 60 years. History of symptoms during the previous 6 months, current symptoms, and severity of current symptoms were evaluated using a questionnaire that included questions about xerostomia, burning mouth, taste disturbance, and oral malodor. The prevalence of xerostomia and its related symptoms was 60.2%; the prevalence of oral malodor was 52.3%, xerostomia 33.0%, burning mouth 13.6%, and taste disturbance 12.5%. Men in their 30s and women in their 60s showed significantly higher prevalence and greater severity of xerostomia, burning mouth, and taste disturbance compared with their counterparts. The prevalence of xerostomia, burning mouth, and taste disturbance, and the severity of xerostomia increased significantly with age in women. The prevalence and severity of these four symptoms were significantly related and the association was the highest between burning mouth and taste disturbance. In conclusion, xerostomia and its related symptoms were highly prevalent at all ages. The prevalence and severity of these symptoms were closely related. Copyright © 2013 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

  10. Interpretive style and intolerance of uncertainty in individuals with anxiety disorders: a focus on generalized anxiety disorder.

    Science.gov (United States)

    Anderson, Kristin G; Dugas, Michel J; Koerner, Naomi; Radomsky, Adam S; Savard, Pierre; Turcotte, Julie

    2012-12-01

    Interpretations of negative, positive, and ambiguous situations were examined in individuals with generalized anxiety disorder (GAD), other anxiety disorders (ANX), and no psychiatric condition (CTRL). Additionally, relationships between specific beliefs about uncertainty (Uncertainty Has Negative Behavioral and Self-Referent Implications [IUS-NI], and Uncertainty Is Unfair and Spoils Everything [IUS-US]) and interpretations were explored. The first hypothesis (that the clinical groups would report more concern for negative, positive, and ambiguous situations than would the CTRL group) was supported. The second hypothesis (that the GAD group would report more concern for ambiguous situations than would the ANX group) was not supported; both groups reported similar levels of concern for ambiguous situations. Exploratory analyses revealed no differences between the GAD and ANX groups in their interpretations of positive and negative situations. Finally, the IUS-US predicted interpretations of negative and ambiguous situations in the full sample, whereas the IUS-NI did not. Clinical implications are discussed. Copyright © 2012 Elsevier Ltd. All rights reserved.

  11. Comparison of the fecal microflora of Seventh-Day Adventists with individuals consuming a general diet. Implications concerning colonic carcinoma.

    Science.gov (United States)

    Goldberg, M J; Smith, J W; Nichols, R L

    1977-07-01

    Qualitative and quantitative fecal microflora was studied in a double blind fashion in 28 subjects. Fourteen were Seventh-Day Adventists, who were strict vegetarians, while the remaining 14 subjects were individuals consuming a general western diet. No statistically significant differences were identified in the fecal microflora of the two groups. The bacteriologic analysis included total aerobes and total anaerobes as well as each of the major fecal aerobes and anaerobes. This study seems to indicate that the dietary intake of animal fat and protein does not significantly alter the fecal microflora, a possibility which has previously been suggested as being part of the explanation for the higher incidence of colonic carcinoma in those who consume meat compared with vegetarians. It does not, however, invalidate the concept that dietary animal fat does increase bile acid degradation within the gastrointestinal tract, a factor which has been related to colon cancer. Future studies should be directed at identifying the factors that may be present in the gastrointestinal tracts of vegetarians which modify the ability of their colonic microflora to degrade bile acids, an essential step in the production of intraluminal carcinogens or co-carcinogens.

  12. The data submitted by the United Kingdom to the United Nations Scientific Committee on the Effects of Atomic Radiation for the 1977 report to the General Assembly

    International Nuclear Information System (INIS)

    Taylor, F.E.; Webb, G.A.M.; Simmonds, J.R.

    1976-10-01

    The United Nations Scientific Committee on the Effects of Atomic Radiation (UNSCEAR) was established by the General Assembly in 1955 to report on the exposure of man to ionising radiation. In the subsequent twenty years the Committee has covered most aspects of the subject with repeated reviews of the levels of exposure from fallout due to weapons testing. The Committee is currently preparing a further report on doses from all sources and an evaluation of their biological effects. This is expected to be published in 1977. To aid it in compiling this report the Committee requested Member States of the UN to submit national data on a wide range of sources of exposure. The Board was asked by the Foreign and Commonwealth Office to collate the information requested from the United Kingdom. Data were available in the scientific literature on some topics, such as medical irradiation and environmental radioactivity. On some other topics, particularly occupational exposure, data have been collected but seldom published systematically

  13. Materials from seminar session of the 3.general assembly of Polish Nuclear Society; 3.Walny Zjazd Polskiego Towarzystwa Nukleonicznego. Materialy sesji seminaryjnej

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-31

    This publication edited as a scientific report of the Institute of Atomic Energy contains papers presented on the seminar session accompanying the 3rd General Assembly of Polish Nuclear Society. Five of these are dealing with the present situation in Poland in the framework of the following subjects: foreseeing electricity demand as a significant factor of development of electricity generation sector and nuclear option choice; present state and development trends of nuclear technique applications in industry, agriculture, health and environment protection; radioactive waste management especially related to the storage of spent fuel from EWA and MARIA research reactors; present educational problems in nuclear science and technology. The problems of nuclear power could not be excluded from the session, although it does not exist in Poland and no plans foresee it currently. The paper on nuclear power contains an extensive summary of nuclear power development worldwide, its safety problems, economic competitiveness and public acceptance. The so called ``Sellafield phenomenon`` considering the growth of leukaemia deaths of children living near that reprocessing plant in England has been commented in mass media criticizing nuclear energy application. The paper on this problem present the results of investigations and hypotheses on reasons having caused this phenomenon. The declaration of the International Council of Nuclear Societies on the role of nuclear science and technology in supporting the development is also included in the report.

  14. Dgp71WD is required for the assembly of the acentrosomal Meiosis I spindle, and is not a general targeting factor for the γ-TuRC

    Directory of Open Access Journals (Sweden)

    Richard F. Reschen

    2012-03-01

    Dgp71WD/Nedd1 proteins are essential for mitotic spindle formation. In human cells, Nedd1 targets γ-tubulin to both centrosomes and spindles, but in other organisms the function of Dgp71WD/Nedd1 is less clear. In Drosophila cells, Dgp71WD plays a major part in targeting γ-tubulin to spindles, but not centrosomes, while in Xenopus egg extracts, Nedd1 acts as a more general microtubule (MT organiser that can function independently of γ-tubulin. The interpretation of these studies, however, is complicated by the fact that some residual Dgp71WD/Nedd1 is likely present in the cells/extracts analysed. Here we generate a Dgp71WD null mutant lacking all but the last 12 nucleotides of coding sequence. The complete loss of Dgp71WD has no quantifiable effect on γ-tubulin or Centrosomin recruitment to the centrosome in larval brain cells. The recruitment of γ-tubulin to spindle MTs, however, is severely impaired, and spindle MT density is reduced in a manner that is indistinguishable from cells lacking Augmin or γ-TuRC function. In contrast, the absence of Dgp71WD leads to defects in the assembly of the acentrosomal female Meiosis I spindle that are more severe than those seen in Augmin or γ-TuRC mutants, indicating that Dgp71WD has additional functions that are independent of these complexes in oocytes. Moreover, the localisation of bicoid RNA during oogenesis, which requires γ-TuRC function, is unperturbed in Dgp71WD120 mutants. Thus, Dgp71WD is not simply a general cofactor required for γ-TuRC and/or Augmin targeting, and it appears to have a crucial role independent of these complexes in the acentrosomal Meiosis I spindle.

  15. Perceptions of the uses of routine general practice data beyond individual care in England: a qualitative study.

    Science.gov (United States)

    Wyatt, David; Cook, Jenny; McKevitt, Christopher

    2018-01-08

    To investigate how different lay and professional groups perceive and understand the use of routinely collected general practice patient data for research, public health, service evaluation and commissioning. We conducted a multimethod, qualitative study. This entailed participant observation of the design and delivery of a series of deliberative engagement events about a local patient database made of routine primary care data. We also completed semistructured interviews with key professionals involved in the database. Qualitative data were thematically analysed. The research took place in an inner city borough in England. Of the community groups who participated in the six engagement events (111 individual citizens), five were health focused. It was difficult to recruit other types of organisations. Participants supported the uses of the database, but it was unclear how well they understood its scope and purpose. They had concerns about transparency, security and the potential misuse of data. Overall, they were more focused on the need for immediate investment in primary care capacity than data infrastructures to improve future health. The 10 interviewed professionals identified the purpose of the database in different ways, according to their interests. They emphasised the promise of the database as a resource in health research in its own right and in linking it to other datasets. Findings demonstrate positivity to the uses of this local database, but a disconnect between the long-term purposes of the database and participants' short-term priorities for healthcare quality. Varying understandings of the database and the potential for it to be used in multiple different ways in the future cement a need for systematic and routine public engagement to develop and maintain public awareness. Problems recruiting community groups signal a need to consider how we engage wider audiences more effectively. © Article author(s) (or their employer(s) unless otherwise stated

  16. Differences in diagnostic activity in general practice and findings for individuals invited to the danish screening programme for colorectal cancer: a population-based cohort study.

    Science.gov (United States)

    Juul, Jakob Søgaard; Andersen, Berit; Laurberg, Søren; Carlsen, Anders Helles; Olesen, Frede; Vedsted, Peter

    2018-06-22

    To investigate the diagnostic activity in general practice and the cumulative incidence of colorectal cancer (CRC) in individuals invited to the Danish national screening programme for CRC. A historical population-based cohort study. The Danish CRC screening programme and general practice. The 376,198 individuals invited to the Danish CRC screening programme from 1 March to 31 December 2014. The diagnostic activity (consultations and haemoglobin measures) in general practice in the year preceding the screening invitation and the cumulated incidence of CRC in the year following the screening invitation. Screening participants had significantly higher diagnostic activity than non-participants. Individuals with a positive faecal immunochemical test (FIT) had higher diagnostic activity compared to individuals with a negative FIT, and a small increase in the months leading up to the invitation. Individuals with a screen-detected CRC had lower diagnostic activity than individuals with no CRC. In total, 308 (25.3%) of CRCs diagnosed in the invited population were diagnosed outside the screening programme. Non-participants with CRC more often had low socio-economic status, high comorbidity and stage IV CRC than participants with CRC. There was a tendency that participants and those with a positive FIT had a higher diagnostic activity the year before the screening. This was not seen for those with CRC detected through screening. CRC must still be diagnosed in general practice in the invited population and non-participants are of special interest as they have higher risk of late stage CRC. Key Points Current awareness:Individuals with colorectal cancer (CRC) in screening may be symptomatic and CRC may still occur outside screening in the invited population. Most important points:The majority of individuals with CRC in screening cannot be expected to be diagnosed on symptomatic presentation in general practice GPs have to be aware that CRC still occurs outside screening in

  17. Fuel assemblies

    International Nuclear Information System (INIS)

    Nakatsuka, Masafumi.

    1979-01-01

    Purpose: To prevent scattering of gaseous fission products released from fuel assemblies stored in an fbr type reactor. Constitution; A cap provided with means capable of storing gas is adapted to amount to the assembly handling head, for example, by way of threading in a storage rack of spent fuel assemblies consisting of a bottom plate, a top plate and an assembly support mechanism. By previously eliminating the gas inside of the assembly and the cap in the storage rack, gaseous fission products upon loading, if released from fuel rods during storage, are stored in the cap and do not scatter in the storage rack. (Horiuchi, T.)

  18. Sequence assembly

    DEFF Research Database (Denmark)

    Scheibye-Alsing, Karsten; Hoffmann, S.; Frankel, Annett Maria

    2009-01-01

    Despite the rapidly increasing number of sequenced and re-sequenced genomes, many issues regarding the computational assembly of large-scale sequencing data have remain unresolved. Computational assembly is crucial in large genome projects as well for the evolving high-throughput technologies and...... in genomic DNA, highly expressed genes and alternative transcripts in EST sequences. We summarize existing comparisons of different assemblers and provide a detailed descriptions and directions for download of assembly programs at: http://genome.ku.dk/resources/assembly/methods.html....

  19. Total and cause-specific mortality by elevated transferrin saturation and hemochromatosis genotype in individuals with diabetes - two general population studies

    DEFF Research Database (Denmark)

    Ellervik, Christina; Mandrup-Poulsen, Thomas; Tybjærg-Hansen, Anne

    2013-01-01

    ObjectiveMortality is increased in patients with hereditary hemochromatosis, in individuals from the general population with increased transferrin saturation(TS), and also in patients with diabetes type 1 and increased TS from a highly specialised diabetes clinic. Thus, we have recommended targeted...... and hemochromatosis genotype(HFE) C282Y/C282Y in individuals with diabetes(type 1,N=118;type 2,N=3228;total,N=3346).ResultsThe cumulative survival was reduced in individuals with diabetes with TS≥50% vs....

  20. New insights into the correlation structure of DSM-IV depression symptoms in the general population v. subsamples of depressed individuals.

    Science.gov (United States)

    Foster, S; Mohler-Kuo, M

    2018-06-01

    Previous research failed to uncover a replicable dimensional structure underlying the symptoms of depression. We aimed to examine two neglected methodological issues in this research: (a) adjusting symptom correlations for overall depression severity; and (b) analysing general population samples v. subsamples of currently depressed individuals. Using population-based cross-sectional and longitudinal data from two nations (Switzerland, 5883 young men; USA, 2174 young men and 2244 young women) we assessed the dimensions of the nine DSM-IV depression symptoms in young adults. In each general-population sample and each subsample of currently depressed participants, we conducted a standardised process of three analytical steps, based on exploratory and confirmatory factor and bifactor analysis, to reveal any replicable dimensional structure underlying symptom correlations while controlling for overall depression severity. We found no evidence of a replicable dimensional structure across samples when adjusting symptom correlations for overall depression severity. In the general-population samples, symptoms correlated strongly and a single dimension of depression severity was revealed. Among depressed participants, symptom correlations were surprisingly weak and no replicable dimensions were identified, regardless of severity-adjustment. First, caution is warranted when considering studies assessing dimensions of depression because general population-based studies and studies of depressed individuals generate different data that can lead to different conclusions. This problem likely generalises to other models based on the symptoms' inter-relationships such as network models. Second, whereas the overall severity aligns individuals on a continuum of disorder intensity that allows non-affected individuals to be distinguished from affected individuals, the clinical evaluation and treatment of depressed individuals should focus directly on each individual's symptom profile.

  1. Psychometric properties of a Dutch version of the Maslach Burnout Inventory General Survey (UBOS) in individuals with work-related problems

    NARCIS (Netherlands)

    Roelofs, J.; Verbraak, M.J.P.M.; Keijsers, G.P.J.; Bruin, M.B.N. de; Schmidt, A.J.M.

    2005-01-01

    Psychometric properties of the Dutch version of the Maslach Burnout Inventory General Survey, the MBI-DV, were examined in individuals with and without clinical burnout. The factor structure, the utility of the MBI-DV as a screening instrument in addition to a clinical interview for diagnosing

  2. General intellectual functioning as a buffer against theory-of-mind deficits in individuals at ultra-high risk for psychosis.

    Science.gov (United States)

    Hur, Ji-Won; Byun, Min Soo; Shin, Na Young; Shin, Ye Seul; Kim, Sung Nyun; Jang, Joon Hwan; Kwon, Jun Soo

    2013-09-01

    The influence of neurocognition, including general intelligence, on theory of mind (ToM) among patients with schizophrenia spectrum disorder is controversial. The purpose of the present study was to identify the influences of the non-ToM cognition and general intelligence on ToM performance in individuals at ultra-high risk (UHR) for psychosis. Fifty-five UHR subjects and 58 healthy controls (HCs) completed neurocognitive, verbal, and nonverbal ToM tasks. UHR individuals showed poorer performance in the two verbal ToM tasks, the false-belief task and the strange-story tasks. Moreover, the UHR subjects displayed poorer recall on the interference list of the verbal learning test. Linear regression analysis revealed that neurocognitive functioning, including executive functioning, working memory, and general intelligence, accounted for significant amounts of the variance in the results for UHR individuals: 20.4% in the false-belief task, 44.0% in the strange-story task, and 49.0% in the nonverbal cartoon task. Neurocognition, including general intelligence, was not a significant contributor to performance on ToM tasks in HCs. ToM deficits were not noted in UHR individuals with above-average IQ scores (≥ 110) compared with UHR subjects with IQ scores less than 110, who displayed significant differences on all ToM tasks compared with HCs. The present results suggest that ToM deficits in UHR individuals are complex and may be influenced by non-ToM cognition. Our findings are discussed in relation to the role of neurocognitive abilities in ToM-related impairments in UHR individuals. Copyright © 2013 Elsevier B.V. All rights reserved.

  3. Predicting Homophobic Behavior among Heterosexual Youth: Domain General and Sexual Orientation-Specific Factors at the Individual and Contextual Level

    Science.gov (United States)

    Poteat, V. Paul; DiGiovanni, Craig D.; Scheer, Jillian R.

    2013-01-01

    As a form of bias-based harassment, homophobic behavior remains prominent in schools. Yet, little attention has been given to factors that underlie it, aside from bullying and sexual prejudice. Thus, we examined multiple domain general (empathy, perspective-taking, classroom respect norms) and sexual orientation-specific factors (sexual…

  4. Distribution of month of birth of individuals with autism spectrum disorder differs from the general population in the Netherlands

    NARCIS (Netherlands)

    Ciéslińska, Anna; Simmelink, Jannicke; Teodorowicz, M.; Verhoef, J.C.M.; Tobi, H.; Savelkoul, H.F.J.

    2017-01-01

    The prevalence of autism spectrum disorders (ASDs) is causally dependent on genetic and environmental influences. We investigated whether autism spectrum disorders are associated with month of birth compared to the general population using a retrospective study, comparing ASD cases (n = 3478) with

  5. NOD2/CARD15 genotype, cardiovascular disease and cancer in 43 600 individuals from the general population

    DEFF Research Database (Denmark)

    Yazdanyar, S.; Nordestgaard, B.G.

    2010-01-01

    from two large Danish general population cohorts followed for 31 years: the Copenhagen City Heart Study (n = 10 597) and the Copenhagen General Population Study (n = 32 999). We examined the risk of cardiovascular disease (2743 and 3890, respectively, in the two studies) and cancer (2144 and 3241......, respectively) by NOD2/CARD15 genotype using Cox and logistic regressions in both studies. To maximize statistical power, the three NOD2/CARD15 genetic variants were analysed together as follows: noncarriers for all three variants, heterozygotes for one of the three variants and homozygotes for one of the three...... variants pooled with compound heterozygotes for two variants. Results. Multifactorially adjusted hazard ratios for cardiovascular disease and cancer in NOD2/CARD15 heterozygotes or homozygotes/compound heterozygotes versus noncarries did not differ from 1.0 in the Copenhagen City Heart Study...

  6. MODELING OF THE PROCESS OF FORMATION OF INDIVIDUAL MARKETING DEMAND: A COMPARATIVE ANALYSIS AND GENERALIZATION OF THE PRECEDING CORRESPONDING RESULTS

    Directory of Open Access Journals (Sweden)

    Anatoly V. Korotkov

    2015-01-01

    Full Text Available The article focuses on the modeling of series-STI formation of individual market demand. The analysis, and then sum-of three well-known inmarketing models, which exhaust the currentlyknown approaches is revised. The article shows that all three models have a signifi cant difference in the number of stages and terminology. The obtained results are the basis for the developmentof the author’s model of gradual development of demand - «need - desire - requirement -demand» or abbreviated as «model NDRD» and can be considered as a contribution to the methodology of study a demand.

  7. Barriers and Opportunities in Consent and Access Procedures in Low- and Middle-Income Country Biobanks: Meeting Notes from the BCNet Training and General Assembly.

    Science.gov (United States)

    Zawati, Ma'n H; Tassé, Anne Marie; Mendy, Maimuna; Caboux, Elodie; Lang, Michael

    2018-04-18

    As biobanking research in low- and middle-income countries (LMICs) continues to grow, novel legal and policy considerations have arisen. Also, while an expansive literature has developed around these issues, the views and concerns of individual researchers in these contexts have been less actively studied. These meeting notes aim to contribute to the growing literature on biobanking in LMICs by communicating a number of challenges and opportunities identified by biobank researchers themselves. Specifically, we describe concerns that emerge in consent and access policy domains. First, we present a review of the literature on distinct policy and legal concerns faced in LMICs, giving special attention to the general absence of practitioner perspectives. From there, we outline and discuss considerations that were raised by meeting participants at a Biobank and Cohort Building Network (BCNet) Ethical, Legal, and Social Issues training program. We conclude by proposing that the unique perspectives of biobank researchers in LMICs should be given serious attention and further research on these perspectives should be conducted.

  8. Nuclear fuel assembly

    International Nuclear Information System (INIS)

    Betten, P.R.

    1976-01-01

    Under the invention the fuel assembly is particularly suitable for liquid metal cooled fast neutron breeder reactors. Hence, according to the invention a fuel assembly cladding includes inward corrugations with respect to the remainder of the cladding according to a recurring pattern determined by the pitch of the metal wire helically wound round the fuel rods of the assembly. The parts of the cladding pressed inwards correspond to the areas in which the wire encircling the peripheral fuel rods is generally located apart from the cladding, thereby reducing the play between the cladding and the peripheral fuel rods situated in these areas. The reduction in the play in turn improves the coolant flow in the internal secondary channels of the fuel assembly to the detriment of the flow in the peripheral secondary channels and thereby establishes a better coolant fluid temperature profile [fr

  9. Predicting homophobic behavior among heterosexual youth: domain general and sexual orientation-specific factors at the individual and contextual level.

    Science.gov (United States)

    Poteat, V Paul; DiGiovanni, Craig D; Scheer, Jillian R

    2013-03-01

    As a form of bias-based harassment, homophobic behavior remains prominent in schools. Yet, little attention has been given to factors that underlie it, aside from bullying and sexual prejudice. Thus, we examined multiple domain general (empathy, perspective-taking, classroom respect norms) and sexual orientation-specific factors (sexual orientation identity importance, number of sexual minority friends, parents' sexual minority attitudes, media messages). We documented support for a model in which these sets of factors converged to predict homophobic behavior, mediated through bullying and prejudice, among 581 students in grades 9-12 (55 % female). The structural equation model indicated that, with the exception of media messages, these additional factors predicted levels of prejudice and bullying, which in turn predicted the likelihood of students to engage in homophobic behavior. These findings highlight the importance of addressing multiple interrelated factors in efforts to reduce bullying, prejudice, and discrimination among youth.

  10. Generalized indices of a typical individual water-heating solar plant in the climatic conditions of Russia different regions

    International Nuclear Information System (INIS)

    Popel', O.S.; Frid, S.E.; Shpil'rajn, Eh.Eh.

    2003-01-01

    By the example of the typical solar water-heating plant (SWP), designed for daily consumption of 100 l of heated water the calculation of the number of days in the year is accomplished, during which such a plant could provide for heating the water not below the assigned control level of 37, 45 and 55 deg C for various ratios between the solar collector square and tank-accumulator volume. The generalized dependences are obtained on the basis of processing the results of the SWP dynamic modeling with application of the typical meteoyears, generated for the climatic conditions of more than 40 populated localities in Russia both in its European and Asian part. The efficiency of the SWP operation in different regions of the country may be determined through their application [ru

  11. Bilingual Language Control and General Purpose Cognitive Control among Individuals with Bilingual Aphasia: Evidence Based on Negative Priming and Flanker Tasks

    Science.gov (United States)

    Dash, Tanya; Kar, Bhoomika R.

    2014-01-01

    Background. Bilingualism results in an added advantage with respect to cognitive control. The interaction between bilingual language control and general purpose cognitive control systems can also be understood by studying executive control among individuals with bilingual aphasia. Objectives. The current study examined the subcomponents of cognitive control in bilingual aphasia. A case study approach was used to investigate whether cognitive control and language control are two separate systems and how factors related to bilingualism interact with control processes. Methods. Four individuals with bilingual aphasia performed a language background questionnaire, picture description task, and two experimental tasks (nonlinguistic negative priming task and linguistic and nonlinguistic versions of flanker task). Results. A descriptive approach was used to analyse the data using reaction time and accuracy measures. The cumulative distribution function plots were used to visualize the variations in performance across conditions. The results highlight the distinction between general purpose cognitive control and bilingual language control mechanisms. Conclusion. All participants showed predominant use of the reactive control mechanism to compensate for the limited resources system. Independent yet interactive systems for bilingual language control and general purpose cognitive control were postulated based on the experimental data derived from individuals with bilingual aphasia. PMID:24982591

  12. Bilingual language control and general purpose cognitive control among individuals with bilingual aphasia: evidence based on negative priming and flanker tasks.

    Science.gov (United States)

    Dash, Tanya; Kar, Bhoomika R

    2014-01-01

    Bilingualism results in an added advantage with respect to cognitive control. The interaction between bilingual language control and general purpose cognitive control systems can also be understood by studying executive control among individuals with bilingual aphasia. objectives: The current study examined the subcomponents of cognitive control in bilingual aphasia. A case study approach was used to investigate whether cognitive control and language control are two separate systems and how factors related to bilingualism interact with control processes. Four individuals with bilingual aphasia performed a language background questionnaire, picture description task, and two experimental tasks (nonlinguistic negative priming task and linguistic and nonlinguistic versions of flanker task). A descriptive approach was used to analyse the data using reaction time and accuracy measures. The cumulative distribution function plots were used to visualize the variations in performance across conditions. The results highlight the distinction between general purpose cognitive control and bilingual language control mechanisms. All participants showed predominant use of the reactive control mechanism to compensate for the limited resources system. Independent yet interactive systems for bilingual language control and general purpose cognitive control were postulated based on the experimental data derived from individuals with bilingual aphasia.

  13. Survival in individuals with severe alpha 1-antitrypsin deficiency (PiZZ) in comparison to a general population with known smoking habits.

    Science.gov (United States)

    Tanash, Hanan A; Ekström, Magnus; Rönmark, Eva; Lindberg, Anne; Piitulainen, Eeva

    2017-09-01

    Knowledge about the natural history of severe alpha 1-antitrypsin (AAT) deficiency (PiZZ) is limited. Our aim was to compare the survival of PiZZ individuals with randomly selected controls from the Swedish general population.The PiZZ subjects (n=1585) were selected from the Swedish National AATD Register. The controls (n=5999) were randomly selected from the Swedish population register. Smoking habits were known for all subjects.Median follow-up times for the PiZZ subjects (731 never-smokers) and controls (3179 never-smokers) were 12 and 17 years, respectively (psmoking habits and presence of respiratory symptoms, the risk of death was still significantly higher for the PiZZ individuals than for the controls, hazard ratio (HR) 3.2 (95% CI 2.8-3.6; psmoking PiZZ individuals identified by screening, compared to never-smoking controls, HR 1.2 (95% CI 0.6-2.2).The never-smoking PiZZ individuals identified by screening had a similar life expectancy to the never-smokers in the Swedish general population. Early diagnosis of AAT deficiency is of utmost importance. Copyright ©ERS 2017.

  14. Person-centred positive emotions, object-centred negative emotions: 2-year-olds generalize negative but not positive emotions across individuals.

    Science.gov (United States)

    Vaish, Amrisha; Grossmann, Tobias; Woodward, Amanda

    2015-09-01

    Prior work suggests that young children do not generalize others' preferences to new individuals. We hypothesized (following Vaish et al., 2008, Psychol. Bull., 134, 383-403) that this may only hold for positive emotions, which inform the child about the person's attitude towards the object but not about the positivity of the object itself. It may not hold for negative emotions, which additionally inform the child about the negativity of the object itself. Two-year-old children saw one individual (the emoter) emoting positively or negatively towards one and neutrally towards a second novel object. When a second individual then requested an object, children generalized the emoter's negative but not her positive emotion to the second individual. Children thus draw different inferences from others' positive versus negative emotions: Whereas they view others' positive emotions as person centred, they may view others' negative emotions as object centred and thus generalizable across people. The results are discussed with relation to the functions and implications of the negativity bias. © 2015 The British Psychological Society.

  15. Experience with construction and assembly of V-1 nuclear power plant

    International Nuclear Information System (INIS)

    Prochazka, J.; Stepanek, S.; Drahy, J.

    1981-01-01

    The model is discussed of the constructions of the V-1 nuclear power plant at Jaslovske Bohunice with SKODA Trust fulfilling the role of the general supplier of the secondary part technology and the chief and special assembly contractor. The SKODA Trust mediated the Soviet supplies of technology, Soviet assembly and special assembly, and the mounting of the primary part according to Soviet projects. Plant start-up was safeguarded by the investor through Bohunice power plant staff and Soviet experts. The assembly of the primary circuit and the test assembly of reactor parts are described and the experience gained is discussed. The technological requirements are illustrated by the most important characteristics of the individual parts of the primary circuit. Also described are the design specifications of the 220 MW saturated steam turbine and the experience with its assembly and start-up. (B.S.)

  16. X-ray computed tomography comparison of individual and parallel assembled commercial lithium iron phosphate batteries at end of life after high rate cycling

    Science.gov (United States)

    Carter, Rachel; Huhman, Brett; Love, Corey T.; Zenyuk, Iryna V.

    2018-03-01

    X-ray computed tomography (X-ray CT) across multiple length scales is utilized for the first time to investigate the physical abuse of high C-rate pulsed discharge on cells wired individually and in parallel.. Manufactured lithium iron phosphate cells boasting high rate capability were pulse power tested in both wiring conditions with high discharge currents of 10C for a high number of cycles (up to 1200) until end of life (health (SOH) monitoring methods, is diagnosed using CT by rendering the interior current collector without harm or alteration to the active materials. Correlation of CT observations to the electrochemical pulse data from the parallel-wired cells reveals the risk of parallel wiring during high C-rate pulse discharge.

  17. Codon cassette mutagenesis: a general method to insert or replace individual codons by using universal mutagenic cassettes.

    Science.gov (United States)

    Kegler-Ebo, D M; Docktor, C M; DiMaio, D

    1994-05-11

    We describe codon cassette mutagenesis, a simple method of mutagenesis that uses universal mutagenic cassettes to deposit single codons at specific sites in double-stranded DNA. A target molecule is first constructed that contains a blunt, double-strand break at the site targeted for mutagenesis. A double-stranded mutagenic codon cassette is then inserted at the target site. Each mutagenic codon cassette contains a three base pair direct terminal repeat and two head-to-head recognition sequences for the restriction endonuclease Sapl, an enzyme that cleaves outside of its recognition sequence. The intermediate molecule containing the mutagenic cassette is then digested with Sapl, thereby removing most of the mutagenic cassette, leaving only a three base cohesive overhang that is ligated to generate the final insertion or substitution mutation. A general method for constructing blunt-end target molecules suitable for this approach is also described. Because the mutagenic cassette is excised during this procedure and alters the target only by introducing the desired mutation, the same cassette can be used to introduce a particular codon at all target sites. Each cassette can deposit two different codons, depending on the orientation in which it is inserted into the target molecule. Therefore, a series of eleven cassettes is sufficient to insert all possible amino acids at any constructed target site. Thus codon cassettes are 'off-the-shelf' reagents, and this methodology should be a particularly useful and inexpensive approach for subjecting multiple different positions in a protein sequence to saturation mutagenesis.

  18. Who has the worst attitudes toward sexual minorities? Comparison of transphobia and homophobia levels in gender dysphoric individuals, the general population and health care providers.

    Science.gov (United States)

    Fisher, A D; Castellini, G; Ristori, J; Casale, H; Giovanardi, G; Carone, N; Fanni, E; Mosconi, M; Ciocca, G; Jannini, E A; Ricca, V; Lingiardi, V; Maggi, M

    2017-03-01

    To date, few studies have addressed attitudes toward transgender individuals. In addition, little is known about health care providers' (HCP) attitudes toward sexual minorities. The aim of the present study is to compare attitudes toward homosexual and transgender individuals between gender dysphoric individuals (GDs), general population controls (C) and HCP. A total of 310 subjects were considered, including 122 GDs (63 transwomen and 59 transmen), 53 heterosexual HCP (26 males and 27 females) and 135 C. Participants completed the Modern Homophobia Scale (MHS) and the Attitudes Toward Transgendered Individuals Scale (ATTI) in order to assess attitudes toward gay men and lesbian women and toward transgender individuals, respectively. In addition, GDs completed the Gender Identity/Gender Dysphoria Questionnaire (GIDYQ-AA) and ATTI to measure, respectively, gender dysphoria levels and internalized transphobia. Religious attitudes were evaluated by means of the Religious Fundamentalism Scale (RFS), and Discrimination and Stigma Scale (DISC-12) was used to measure perceived discrimination. (1) Men showed significantly higher levels of homophobia and transphobia when compared to women (p attitudes, which are strongly dependent on religious precepts and dogma.

  19. General Exercise Does Not Improve Long-Term Pain and Disability in Individuals With Whiplash-Associated Disorders: A Systematic Review.

    Science.gov (United States)

    Griffin, Alexandra; Leaver, Andrew; Moloney, Niamh

    2017-07-01

    Study Design Systematic review of randomized controlled trials. Background General exercise, defined as purposeful physical activity involving repetitive exercises and incorporating multiple muscle groups, is frequently used in the management of whiplash-associated disorders (WADs). Evidence supporting its efficacy is not well established. Objectives To determine whether general exercise is effective in reducing pain and disability in people with WAD. Methods Studies published in English in peer-reviewed journals between January 1990 and May 2015 were eligible if they evaluated a general exercise intervention compared with a different intervention or control. Studies were required to evaluate pain and disability at medium-term (6-14 weeks) and long-term (52 weeks) follow-ups. The mean ± SD and sample size were recorded for follow-up scores and for change scores from baseline to follow-up. Results Of the 3 high-quality studies that were eligible for inclusion, none investigated general exercise alone. There were no clinically meaningful differences between comprehensive exercise programs, which included general exercise, and minimal intervention controls in the medium and long term. No studies directly compared general exercise with a no-treatment control. All included studies used different control interventions, preventing meta-analysis. Conclusion A lack of significant long-term improvements from general exercise interventions in individuals with WAD was identified. This finding differs from the positive benefits of general exercise for other musculoskeletal conditions. This may, in part, relate to the complexity of whiplash conditions. This may also reflect the challenge of exercise prescription in this population, where the need for sufficient intensity is balanced against the impact that exercise has on pain. Level of Evidence Therapy, level 1a. J Orthop Sports Phys Ther 2017;47(7):472-480. Epub 16 Jun 2017. doi:10.2519/jospt.2017.7081.

  20. Materials damaging and rupture - Volumes 1-2. General remarks, metallic materials. Non-metallic materials and biomaterials, assemblies and industrial problems

    International Nuclear Information System (INIS)

    Clavel, M.; Bompard, P.

    2009-01-01

    The rupture and damaging of materials and structures is almost always and unwanted events which may have catastrophic consequences. Even if the mechanical failure causes can often be analyzed using a thorough knowledge of materials behaviour, the forecasting and prevention of failures remain difficult. While the macroscopic mechanical behaviour is often the result of average effects at the structure or microstructure scale, the damage is very often the result of the combination of load peaks, of localization effects and of microstructure defects. This book, presented in two volumes, takes stock of the state-of-the-art of the knowledge gained in the understanding and modelling of rupture and damaging phenomena of materials and structure, mostly of metallic type. It gives an outline of the available knowledge for other classes of materials (ceramics, biomaterials, geo-materials..) and for different types of applications (aeronautics, nuclear industry). Finally, it examines the delicate problem, but very important in practice, of the behaviour of assemblies. Content: Vol.1 - physical mechanisms of materials damaging and rupture; rupture mechanics; cyclic plasticity and fatigue crack growth; fatigue crack propagation; environment-induced cracking; contacts and surfaces. Vol.2 - glasses and ceramics; natural environments: soils and rocks; mechanical behaviour of biological solid materials: the human bone; contribution of simulation to the understanding of rupture mechanisms; assemblies damaging and rupture; industrial cases (behaviour of PWR pressure vessel steels, and thermal and mechanical stresses in turbojet engines). (J.S.)

  1. Fuel assembly

    International Nuclear Information System (INIS)

    Abe, Hideaki; Sakai, Takao; Ishida, Tomio; Yokota, Norikatsu.

    1992-01-01

    The lower ends of a plurality of plate-like shape memory alloys are secured at the periphery of the upper inside of the handling head of a fuel assembly. As the shape memory alloy, a Cu-Zn alloy, a Ti-Pd alloy or a Fe-Ni alloy is used. When high temperature coolants flow out to the handling head, the shape memory alloy deforms by warping to the outer side more greatly toward the upper portion thereof with the temperature increase of the coolants. As the result, the shape of the flow channel of the coolants is changed so as to enlarge at the exit of the upper end of the fuel assembly. Then, the pressure loss of the coolants in the fuel assembly is decreased by the enlargement. Accordingly, the flow rate of the coolants in the fuel assembly is increased to lower the temperature of the coolants. Further, high temperature coolants and low temperature coolants are mixed sufficiently just above the fuel assembly. This can suppress the temperature fluctuation of the mixed coolants in the upper portion of the reactor core, thereby enabling to decrease a fatigue and failures of the structural components in the upper portion of the reactor core. (I.N.)

  2. Drive piston assembly for a valve actuator assembly

    Science.gov (United States)

    Sun, Zongxuan

    2010-02-23

    A drive piston assembly is provided that is operable to selectively open a poppet valve. The drive piston assembly includes a cartridge defining a generally stepped bore. A drive piston is movable within the generally stepped bore and a boost sleeve is coaxially disposed with respect to the drive piston. A main fluid chamber is at least partially defined by the generally stepped bore, drive piston, and boost sleeve. First and second feedback chambers are at least partially defined by the drive piston and each are disposed at opposite ends of the drive piston. At least one of the drive piston and the boost sleeve is sufficiently configured to move within the generally stepped bore in response to fluid pressure within the main fluid chamber to selectively open the poppet valve. A valve actuator assembly and engine are also provided incorporating the disclosed drive piston assembly.

  3. Seismic behaviour of fuel assembly

    Energy Technology Data Exchange (ETDEWEB)

    Song, Heuy Gap; Jhung, Myung Jo [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1993-11-01

    A general approach for the dynamic time-history analysis of the reactor core is presented in this paper as a part of the fuel assembly qualification program. Several detailed core models are set up to reflect the placement of the fuel assemblies within the core shroud. Peak horizontal responses are obtained for each model for the motions induced from earthquake. The dynamic responses such as fuel assembly shear force, bending moment and displacement, and spacer grid impact loads are carefully investigated. Also, the sensitivity responses are obtained for the earthquake motions and the fuel assembly non-linear response characteristics are discussed. (Author) 9 refs., 24 figs., 1 tab.

  4. Assembling of (βLPH) beta-lypothrophine radioimmunoassay. Plasma levels standardization in normal individuals and patients with hypophysis and adrenals diseases

    International Nuclear Information System (INIS)

    Castro, Margaret de.

    1988-01-01

    The present study investigates the extraction and radioimmunoassay (RIA) conditions of plasma βLPH. It was extracted by the activated silicic acid method, with a mean extraction efficiency of 31.6% and a mean intra-extraction variation coefficient of 8.1%. Radioiodination was performed by the chloramine-T method and βLPH 125 I was purified by gel chromatography on Sephadex G100. Estimated specific activity ranged from 100 to 192.8 μCi/μg, with a mean incorporation percentage of 66.6%. The titer of the first antibody was 1:50.000/100 μl. The assay was performed under non-equilibrium conditions, with a pre-incubation period of 24 hours and incubation of 4 hours. Mean immunoreactivity (Bo/Total) was 21.1%, with a mean Blank/Total ratio of 2.3%. Sensitivity, expressed as the mean minimum detectable dose, was 40 pg/tube, equivalent to 56 pg/ml plasma. Intra-assay variation coefficients were 6.5%, 3.8% and 6.8%, respectively, at B/Bo levels of 0.8, 0.6 and 0.4 of the standard curve. At B/Bo equal to 0.5, the intra-assay variation coefficient was 20.9%. Replicates of 14 plasma samples showed a correlation coefficient of r 0.99, (p< 0.05). Parallelism between the curve obtained with different volumes of an extract with a high βLPH value and the standard curve was found. The method was controlled biologically by the presence of correlation between the plasma βLPH levels and determined pathological states and with clinical functional studies. Twenty seven normal individuals, 10 patients with Cushing's disease to a tumor of the hypophysis, 4 patients with Cushing syndrome due to an adrenal tumor, 10 patients Addison disease, and 8 patients with hypopituitarism were studied. (author). 119 refs., 28 figs., 2 tabs

  5. Legal content of the International Convention on the Protection of the Rights of All Migrant Workers and Members of Their Families, adopted by the united nations general assembly by resolution 45/158 of 18 December 1990.

    Directory of Open Access Journals (Sweden)

    Aurelia Álvarez Rodríguez

    2016-10-01

    Full Text Available The author makes a detailed analysis of the legal contents of the International Convention on the Protection of the Rights of all Migrant workers and their Families, adopted by the General Assembly of the United Nations in the Resolution 45/158 of December 1990. The objectives of the Convention, the personal spehere of application, the Human Rights of all migrant workers and their families wether they be regular of iregular are presented throughout the article. Finally, the practical effectiveness of the Convention is analyzed concluding with the importance of its ratification by the largest number of States possible.

  6. Fuel assembly

    International Nuclear Information System (INIS)

    Nakatsuka, Masafumi; Matsuzuka, Ryuji.

    1976-01-01

    Object: To provide a fuel assembly which can decrease pressure loss of coolant to uniform temperature. Structure: A sectional area of a flow passage in the vicinity of an inner peripheral surface of a wrapper tube is limited over the entire length to prevent the temperature of a fuel element in the outermost peripheral portion from being excessively decreased to thereby flatten temperature distribution. To this end, a plurality of pincture-frame-like sheet metals constituting a spacer for supporting a fuel assembly, which has a plurality of fuel elements planted lengthwise and in given spaced relation within the wrapper tube, is disposed in longitudinal grooves and in stacked fashion to form a substantially honeycomb-like space in cross section. The fuel elements are inserted and supported in the space to form a fuel assembly. (Kamimura, M.)

  7. Fuel assemblies

    International Nuclear Information System (INIS)

    Nagano, Mamoru; Yoshioka, Ritsuo

    1983-01-01

    Purpose: To effectively utilize nuclear fuels by increasing the reactivity of a fuel assembly and reduce the concentration at the central region thereof upon completion of the burning. Constitution: A fuel assembly is bisected into a central region and a peripheral region by disposing an inner channel box within a channel box. The flow rate of coolants passing through the central region is made greater than that in the peripheral region. The concentration of uranium 235 of the fuel rods in the central region is made higher. In such a structure, since the moderating effect in the central region is improved, the reactivity of the fuel assembly is increased and the uranium concentration in the central region upon completion of the burning can be reduced, fuel economy and effective utilization of uranium can be attained. (Kamimura, M.)

  8. WHO: World Health Assembly.

    Science.gov (United States)

    McGregor, A

    1992-05-23

    1200 delegates from 175 member countries attended the 45th World Health Assembly in Geneva. Everyone at the Assembly ratified measures to prevent and control AIDS. 12 countries intended to do long term planning for community based care for AIDS patients. Further the Assembly denounced instances where countries and individuals denied the gravity of the AIDS pandemic. In fact, it expressed the importance for urgent and intensive action against HIV/AIDS. The assembly backed proposals to prevent and control sexually transmitted diseases that affect AIDS patients, especially hepatitis B. For example, in countries with hepatitis B prevalence 8% (many countries in Sub-Sahara Africa, Asia, the Pacific region, and South America), health officials should introduce hepatitis B vaccine into their existing immunization programs by 1995. By 1997, this vaccine should be part of all immunization programs. The Assembly was aware of the obstacles of establishing reliable cold chains for nationwide distribution, however. Delegates in Committee A objected to the fact that 50% of the populations of developing countries continued to have limited access to essential drugs. They also expressed disapproval in implementation of WHO's 1988 ethical criteria for promotion of drugs which WHO entrusted to the Council for International Organisations of Medical Sciences (CIOMS). CIOMS lacked WHO's status and thus could not effectively monitor drug advertising. In fact, the pharmaceutical industry as well as WHO provided the funds for a meeting of 25 experts to discuss principles included in the ethical criteria. At least 4 countries insisted that WHO have the ultimate authority in monitoring drug advertising. Delegates did adopt a compromise resolution on this topic which required that industry promotion methods be reported to the 1994 Assembly via the Executive Board. The Assembly requested WHO to establish an international advisory committee on nursing and midwifery and to improve the network of

  9. Human Assisted Assembly Processes

    Energy Technology Data Exchange (ETDEWEB)

    CALTON,TERRI L.; PETERS,RALPH R.

    2000-01-01

    Automatic assembly sequencing and visualization tools are valuable in determining the best assembly sequences, but without Human Factors and Figure Models (HFFMs) it is difficult to evaluate or visualize human interaction. In industry, accelerating technological advances and shorter market windows have forced companies to turn to an agile manufacturing paradigm. This trend has promoted computerized automation of product design and manufacturing processes, such as automated assembly planning. However, all automated assembly planning software tools assume that the individual components fly into their assembled configuration and generate what appear to be a perfectly valid operations, but in reality the operations cannot physically be carried out by a human. Similarly, human figure modeling algorithms may indicate that assembly operations are not feasible and consequently force design modifications; however, if they had the capability to quickly generate alternative assembly sequences, they might have identified a feasible solution. To solve this problem HFFMs must be integrated with automated assembly planning to allow engineers to verify that assembly operations are possible and to see ways to make the designs even better. Factories will very likely put humans and robots together in cooperative environments to meet the demands for customized products, for purposes including robotic and automated assembly. For robots to work harmoniously within an integrated environment with humans the robots must have cooperative operational skills. For example, in a human only environment, humans may tolerate collisions with one another if they did not cause much pain. This level of tolerance may or may not apply to robot-human environments. Humans expect that robots will be able to operate and navigate in their environments without collisions or interference. The ability to accomplish this is linked to the sensing capabilities available. Current work in the field of cooperative

  10. Individual Differences in the Speed of Facial Emotion Recognition Show Little Specificity but Are Strongly Related with General Mental Speed: Psychometric, Neural and Genetic Evidence

    Directory of Open Access Journals (Sweden)

    Xinyang Liu

    2017-08-01

    Full Text Available Facial identity and facial expression processing are crucial socio-emotional abilities but seem to show only limited psychometric uniqueness when the processing speed is considered in easy tasks. We applied a comprehensive measurement of processing speed and contrasted performance specificity in socio-emotional, social and non-social stimuli from an individual differences perspective. Performance in a multivariate task battery could be best modeled by a general speed factor and a first-order factor capturing some specific variance due to processing emotional facial expressions. We further tested equivalence of the relationships between speed factors and polymorphisms of dopamine and serotonin transporter genes. Results show that the speed factors are not only psychometrically equivalent but invariant in their relation with the Catechol-O-Methyl-Transferase (COMT Val158Met polymorphism. However, the 5-HTTLPR/rs25531 serotonin polymorphism was related with the first-order factor of emotion perception speed, suggesting a specific genetic correlate of processing emotions. We further investigated the relationship between several components of event-related brain potentials with psychometric abilities, and tested emotion specific individual differences at the neurophysiological level. Results revealed swifter emotion perception abilities to go along with larger amplitudes of the P100 and the Early Posterior Negativity (EPN, when emotion processing was modeled on its own. However, after partialling out the shared variance of emotion perception speed with general processing speed-related abilities, brain-behavior relationships did not remain specific for emotion. Together, the present results suggest that speed abilities are strongly interrelated but show some specificity for emotion processing speed at the psychometric level. At both genetic and neurophysiological levels, emotion specificity depended on whether general cognition is taken into account

  11. Individual Differences in the Speed of Facial Emotion Recognition Show Little Specificity but Are Strongly Related with General Mental Speed: Psychometric, Neural and Genetic Evidence

    Science.gov (United States)

    Liu, Xinyang; Hildebrandt, Andrea; Recio, Guillermo; Sommer, Werner; Cai, Xinxia; Wilhelm, Oliver

    2017-01-01

    Facial identity and facial expression processing are crucial socio-emotional abilities but seem to show only limited psychometric uniqueness when the processing speed is considered in easy tasks. We applied a comprehensive measurement of processing speed and contrasted performance specificity in socio-emotional, social and non-social stimuli from an individual differences perspective. Performance in a multivariate task battery could be best modeled by a general speed factor and a first-order factor capturing some specific variance due to processing emotional facial expressions. We further tested equivalence of the relationships between speed factors and polymorphisms of dopamine and serotonin transporter genes. Results show that the speed factors are not only psychometrically equivalent but invariant in their relation with the Catechol-O-Methyl-Transferase (COMT) Val158Met polymorphism. However, the 5-HTTLPR/rs25531 serotonin polymorphism was related with the first-order factor of emotion perception speed, suggesting a specific genetic correlate of processing emotions. We further investigated the relationship between several components of event-related brain potentials with psychometric abilities, and tested emotion specific individual differences at the neurophysiological level. Results revealed swifter emotion perception abilities to go along with larger amplitudes of the P100 and the Early Posterior Negativity (EPN), when emotion processing was modeled on its own. However, after partialling out the shared variance of emotion perception speed with general processing speed-related abilities, brain-behavior relationships did not remain specific for emotion. Together, the present results suggest that speed abilities are strongly interrelated but show some specificity for emotion processing speed at the psychometric level. At both genetic and neurophysiological levels, emotion specificity depended on whether general cognition is taken into account or not. These

  12. Valve assembly

    International Nuclear Information System (INIS)

    Sandling, M.

    1981-01-01

    An improved valve assembly, used for controlling the flow of radioactive slurry, is described. Radioactive contamination of the air during removal or replacement of the valve is prevented by sucking air from the atmosphere through a portion of the structure above the valve housing. (U.K.)

  13. Fuel assembly

    International Nuclear Information System (INIS)

    Gjertsen, R.K.; Bassler, E.A.; Huckestein, E.A.; Salton, R.B.; Tower, S.N.

    1988-01-01

    A fuel assembly adapted for use with a pressurized water nuclear reactor having capabilities for fluid moderator spectral shift control is described comprising: parallel arranged elongated nuclear fuel elements; means for providing for axial support of the fuel elements and for arranging the fuel elements in a spaced array; thimbles interspersed among the fuel elements adapted for insertion of a rod control cluster therewithin; means for structurally joining the fuel elements and the guide thimbles; fluid moderator control means for providing a volume of low neutron absorbing fluid within the fuel assembly and for removing a substantially equivalent volume of reactor coolant water therefrom, a first flow manifold at one end of the fuel assembly sealingly connected to a first end of the moderator control tubes whereby the first ends are commonly flow connected; and a second flow manifold, having an inlet passage and an outlet passage therein, sealingly connected to a second end of the moderator control tubes at a second end of the fuel assembly

  14. A divide-and-conquer algorithm for large-scale de novo transcriptome assembly through combining small assemblies from existing algorithms.

    Science.gov (United States)

    Sze, Sing-Hoi; Parrott, Jonathan J; Tarone, Aaron M

    2017-12-06

    While the continued development of high-throughput sequencing has facilitated studies of entire transcriptomes in non-model organisms, the incorporation of an increasing amount of RNA-Seq libraries has made de novo transcriptome assembly difficult. Although algorithms that can assemble a large amount of RNA-Seq data are available, they are generally very memory-intensive and can only be used to construct small assemblies. We develop a divide-and-conquer strategy that allows these algorithms to be utilized, by subdividing a large RNA-Seq data set into small libraries. Each individual library is assembled independently by an existing algorithm, and a merging algorithm is developed to combine these assemblies by picking a subset of high quality transcripts to form a large transcriptome. When compared to existing algorithms that return a single assembly directly, this strategy achieves comparable or increased accuracy as memory-efficient algorithms that can be used to process a large amount of RNA-Seq data, and comparable or decreased accuracy as memory-intensive algorithms that can only be used to construct small assemblies. Our divide-and-conquer strategy allows memory-intensive de novo transcriptome assembly algorithms to be utilized to construct large assemblies.

  15. The fading affect bias shows positive outcomes at the general but not the individual level of analysis in the context of social media.

    Science.gov (United States)

    Gibbons, Jeffrey A; Horowitz, Kyle A; Dunlap, Spencer M

    2017-08-01

    Unpleasant affect fades faster than pleasant affect (e.g., Walker, Vogl, & Thompson, 1997); this effect is referred to as the Fading Affect Bias (FAB; Walker, Skowronski, Gibbons, Vogl, & Thompson, 2003a). Research shows that the FAB is consistently related to positive/healthy outcomes at a general but not at a specific level of analysis based on event types and individual differences (e.g., Gibbons et al., 2013). Based on the positive outcomes for FAB and negative outcomes for social media (Bolton et al., 2013; Huang, 2010), the current study examined FAB in the context of social media events along with related individual differences. General positive outcomes were shown in the form of robust FAB effects across social media and non-social media events, a larger FAB for non-social media events than for social media events, negative correlations of FAB with depression, anxiety, and stress as well as a positive correlation of FAB with self-esteem. However, the lack of a negative correlation between FAB and anxiety for social media events in a 3-way interaction did not show positive outcomes at a specific level of analysis. Rehearsal ratings mediated the 3-way interaction. Implications are discussed. Copyright © 2017 Elsevier Inc. All rights reserved.

  16. Costs and expected gain in lifetime health from intensive care versus general ward care of 30,712 individual patients: a distribution-weighted cost-effectiveness analysis.

    Science.gov (United States)

    Lindemark, Frode; Haaland, Øystein A; Kvåle, Reidar; Flaatten, Hans; Norheim, Ole F; Johansson, Kjell A

    2017-08-21

    Clinicians, hospital managers, policy makers, and researchers are concerned about high costs, increased demand, and variation in priorities in the intensive care unit (ICU). The objectives of this modelling study are to describe the extra costs and expected health gains associated with admission to the ICU versus the general ward for 30,712 patients and the variation in cost-effectiveness estimates among subgroups and individuals, and to perform a distribution-weighted economic evaluation incorporating extra weighting to patients with high severity of disease. We used a decision-analytic model that estimates the incremental cost per quality-adjusted life year (QALY) gained (ICER) from ICU admission compared with general ward care using Norwegian registry data from 2008 to 2010. We assigned increasing weights to health gains for those with higher severity of disease, defined as less expected lifetime health if not admitted. The study has inherent uncertainty of findings because a randomized clinical trial comparing patients admitted or rejected to the ICU has never been performed. Uncertainty is explored in probabilistic sensitivity analysis. The mean cost-effectiveness of ICU admission versus ward care was €11,600/QALY, with 1.6 QALYs gained and an incremental cost of €18,700 per patient. The probability (p) of cost-effectiveness was 95% at a threshold of €22,000/QALY. The mean ICER for medical admissions was €10,700/QALY (p = 97%), €12,300/QALY (p = 93%) for admissions after acute surgery, and €14,700/QALY (p = 84%) after planned surgery. For individualized ICERs, there was a 50% probability that ICU admission was cost-effective for 85% of the patients at a threshold of €64,000/QALY, leaving 15% of the admissions not cost-effective. In the distributional evaluation, 8% of all patients had distribution-weighted ICERs (higher weights to gains for more severe conditions) above €64,000/QALY. High-severity admissions gained the most, and were more

  17. Plutonium demonstration assemblies in the CNA core

    International Nuclear Information System (INIS)

    Romain, J.L.

    1975-01-01

    The SENA (Societe d'Exploitation Nucleaire des Ardennes) has decided to load two plutonium assemblies at the beginning of the 6th cycle of the CNA (Centrale Nucleaire des Ardennes). These assemblies will be loaded in September 1975 and will undergo three irradiation cycles. A general description of these two assemblies and nuclear design calculations that have been performed are presented [fr

  18. Multi-Robot Assembly Strategies and Metrics

    Science.gov (United States)

    MARVEL, JEREMY A.; BOSTELMAN, ROGER; FALCO, JOE

    2018-01-01

    We present a survey of multi-robot assembly applications and methods and describe trends and general insights into the multi-robot assembly problem for industrial applications. We focus on fixtureless assembly strategies featuring two or more robotic systems. Such robotic systems include industrial robot arms, dexterous robotic hands, and autonomous mobile platforms, such as automated guided vehicles. In this survey, we identify the types of assemblies that are enabled by utilizing multiple robots, the algorithms that synchronize the motions of the robots to complete the assembly operations, and the metrics used to assess the quality and performance of the assemblies. PMID:29497234

  19. Multi-Robot Assembly Strategies and Metrics.

    Science.gov (United States)

    Marvel, Jeremy A; Bostelman, Roger; Falco, Joe

    2018-02-01

    We present a survey of multi-robot assembly applications and methods and describe trends and general insights into the multi-robot assembly problem for industrial applications. We focus on fixtureless assembly strategies featuring two or more robotic systems. Such robotic systems include industrial robot arms, dexterous robotic hands, and autonomous mobile platforms, such as automated guided vehicles. In this survey, we identify the types of assemblies that are enabled by utilizing multiple robots, the algorithms that synchronize the motions of the robots to complete the assembly operations, and the metrics used to assess the quality and performance of the assemblies.

  20. Fuel assembly

    International Nuclear Information System (INIS)

    Yokota, Tokunobu.

    1990-01-01

    A fuel assembly used in a FBR type nuclear reactor comprises a plurality of fuel rods and a moderator guide member (water rod). A moderator exit opening/closing mechanism is formed at the upper portion of the moderator guide member for opening and closing a moderator exit. In the initial fuel charging operation cycle to the reactor, the moderator exit is closed by the moderator exit opening/closing mechanism. Then, voids are accumulated at the inner upper portion of the moderator guide member to harden spectrum and a great amount of plutonium is generated and accumulated in the fuel assembly. Further, in the fuel re-charging operation cycle, the moderator guide member is used having the moderator exit opened. In this case, voids are discharged from the moderator guide member to decrease the ratio, and the plutonium accumulated in the initial charging operation cycle is burnt. In this way, the fuel economy can be improved. (I.N.)

  1. Fuel assemblies

    International Nuclear Information System (INIS)

    Echigoya, Hironori; Nomata, Terumitsu.

    1983-01-01

    Purpose: To render the axial distribution relatively flat. Constitution: First nuclear element comprises a fuel can made of zircalloy i.e., the metal with less neutron absorption, which is filled with a plurality of UO 2 pellets and sealed by using a lower end plug, a plenum spring and an upper end plug by means of welding. Second fuel element is formed by substituting a part of the UO 2 pellets with a water tube which is sealed with water and has a space for allowing the heat expansion. The nuclear fuel assembly is constituted by using the first and second fuel elements together. In such a structure, since water reflects neutrons and decrease their leakage to increase the temperature, reactivity is added at the upper portion of the fuel assembly to thereby flatten the axial power distribution. Accordingly, stable operation is possible only by means of deep control rods while requiring no shallow control rods. (Sekiya, K.)

  2. Fuel assembly

    International Nuclear Information System (INIS)

    Kawai, Mitsuo.

    1988-01-01

    Purpose: To reduce the corrosion rate and suppress the increase of radioactive corrosion products in reactor water of nuclear fuel assemblies for use in BWR type reactors having spacer springs made of nickel based deposition reinforced type alloys. Constitution: Spacer rings made of nickel based deposition reinforced type alloy are incorporated and used as fuel assemblies after applying treatment of dipping and maintaining at high temperature water followed by heating in steams. Since this can remove the nickel leaching into reactor water at the initial stage, Co-58 as the radioactive corrosion products in the reactor water can be reduced, and the operation at in-service inspection or repairement can be facilitated to improve the working efficiency of the nuclear power plant. The dipping time is desirably more than 10 hours and more desirably more than 30 hours. (Horiuchi, T. )

  3. Fuel assembly

    International Nuclear Information System (INIS)

    Watanabe, Shoichi; Hirano, Yasushi.

    1998-01-01

    A one-half or more of entire fuel rods in a fuel assembly comprises MOX fuel rods containing less than 1wt% of burnable poisons, and at least a portion of the burnable poisons comprises gadolinium. Then, surplus reactivity at an initial stage of operation cycle is controlled to eliminate burnable poisons remained unburnt at a final stage, as well as increase thermal reactivity. In addition, the content of fission plutonium is determined to greater than the content of uranium 235, and fuel rods at corner portions are made not to incorporate burnable poisons. Fuel rods not containing burnable poisons are disposed at positions in adjacent with fuel rods facing to a water rod at one or two directions. Local power at radial center of the fuel assembly is increased to flatten the distortion of radial power distribution. (N.H.)

  4. Fuel assembly

    International Nuclear Information System (INIS)

    Ueda, Sei; Ando, Ryohei; Mitsutake, Toru.

    1995-01-01

    The present invention concerns a fuel assembly suitable to a BWR-type reactor and improved especially with the nuclear characteristic, heat performance, hydraulic performance, dismantling or assembling performance and economical property. A part of poison rods are formed as a large-diameter/multi-region poison rods having a larger diameter than a fuel rod. A large number of fuel rods are disposed surrounding a large diameter water rod and a group of the large-diameter/multi-region poison rods in adjacent with the water rod. The large-diameter water rod has a burnable poison at the tube wall portion. At least a portion of the large-diameter poison rods has a coolant circulation portion allowing coolants to circulate therethrough. Since the large-diameter poison rods are disposed at a position of high neutron fluxes, a large neutron multiplication factor suppression effect can be provided, thereby enabling to reduce the number of burnable poison rods relative to fuels. As a result, power peaking in the fuel assembly is moderated and a greater amount of plutonium can be loaded. In addition the flow of cooling water which tends to gather around the large diameter water rod can be controlled to improve cooling performance of fuels. (N.H.)

  5. Magnetic scanning of LWR fuel assemblies

    International Nuclear Information System (INIS)

    Fiarman, S.; Moodenbaugh, A.

    1980-01-01

    Nondestructive assay (NDA) techniques are available both for fresh and spent fuel, but generally are too time consuming and do not uniquely identify an assembly. A new method is reported to obtain a signature from a magnetic scan of each assembly. This scan is an NDA technique that detects magnetic inclusions. It is potentially fast (5 min/assembly), and may provide a unique signature from the magnetic properties of each fuel assembly

  6. Report of the United Nations Scientific Committee on the Effects of Atomic Radiation. General Assembly 56. session (10-18 July 2008). Official Records: 63. session, suppl. no. 46(A/63/46)

    International Nuclear Information System (INIS)

    2008-01-01

    Exposure to radiation has origins such as medical diagnostic and therapeutic procedures; nuclear weapons production and testing; natural background radiation; nuclear electricity generation; accidents such as the one at Chernobyl in 1986; and occupations that entail increased exposure to artificial or naturally occurring sources of radiation. Since the establishment of the United Nations Scientific Committee on the Effects of Atomic Radiation by General Assembly resolution 913 (X) of 3 December 1955, the mandate of the Committee has been to undertake broad reviews of the sources of ionizing radiation and of the effects of that radiation on human health and the environment. In pursuit of its mandate, the Committee thoroughly reviews and evaluates global and regional exposures to radiation; and it evaluates evidence of radiation-induced health effects in exposed groups, including survivors of the atomic bombings in Japan. The Committee also reviews advances in the understanding of the biological mechanisms by which radiation-induced effects on health or on the environment can occur. Those assessments provide the scientific foundation used, inter alia, by the relevant agencies of the United Nations system in formulating international standards for protection of the public and of workers against ionizing radiation, those standards, in turn, are linked to important legal and regulatory instruments. The Committee held its fifty-sixth session in Vienna from 10 to 18 July 2008. Norman Gentner (Canada), Wolfgang Weiss (Germany) and Mohamed A. Gomaa (Egypt) served as Chairman, Vice-Chairman and Rapporteur, respectively. The Committee scrutinized and approved for publication five scientific annexes that had last been considered at its fifty-fifth session (21-25 May 2007), as reported to the General Assembly in the report of the Committee on that session.3 As previously reported,4 the Committee had originally planned that those documents would be published by 2005. With regard

  7. N-Acetyl-4-aminophenol (paracetamol), N-acetyl-2-aminophenol and acetanilide in urine samples from the general population, individuals exposed to aniline and paracetamol users.

    Science.gov (United States)

    Dierkes, Georg; Weiss, Tobias; Modick, Hendrik; Käfferlein, Heiko Udo; Brüning, Thomas; Koch, Holger M

    2014-01-01

    Epidemiological studies suggest associations between the use of N-acetyl-4-aminophenol (paracetamol) during pregnancy and increased risks of reproductive disorders in the male offspring. Previously we have reported a ubiquitous urinary excretion of N-acetyl-4-aminophenol in the general population. Possible sources are (1) direct intake of paracetamol through medication, (2) paracetamol residues in the food chain and (3) environmental exposure to aniline or related substances that are metabolized into N-acetyl-4-aminophenol. In order to elucidate the origins of the excretion of N-acetyl-4-aminophenol in urine and to contribute to the understanding of paracetamol and aniline metabolism in humans we developed a rapid, turbulent-flow HPLC-MS/MS method with isotope dilution for the simultaneous quantification of N-acetyl-4-aminophenol and two other aniline related metabolites, N-acetyl-2-aminophenol and acetanilide. We applied this method to three sets of urine samples: (1) individuals with no known exposure to aniline and also no recent paracetamol medication; (2) individuals after occupational exposure to aniline but no paracetamol medication and (3) paracetamol users. We confirmed the omnipresent excretion of N-acetyl-4-aminophenol. Additionally we revealed an omnipresent excretion of N-acetyl-2-aminophenol. In contrast, acetanilide was only found after occupational exposure to aniline, not in the general population or after paracetamol use. The results lead to four preliminary conclusions: (1) other sources than aniline seem to be responsible for the major part of urinary N-acetyl-4-aminophenol in the general population; (2) acetanilide is a metabolite of aniline in man and a valuable biomarker for aniline in occupational settings; (3) aniline baseline levels in the general population measured after chemical hydrolysis do not seem to originate from acetanilide and hence not from a direct exposure to aniline itself and (4) N-acetyl-2-aminophenol does not seem to be

  8. Light-Controlled Swarming and Assembly of Colloidal Particles

    Directory of Open Access Journals (Sweden)

    Jianhua Zhang

    2018-02-01

    Full Text Available Swarms and assemblies are ubiquitous in nature and they can perform complex collective behaviors and cooperative functions that they cannot accomplish individually. In response to light, some colloidal particles (CPs, including light active and passive CPs, can mimic their counterparts in nature and organize into complex structures that exhibit collective functions with remote controllability and high temporospatial precision. In this review, we firstly analyze the structural characteristics of swarms and assemblies of CPs and point out that light-controlled swarming and assembly of CPs are generally achieved by constructing light-responsive interactions between CPs. Then, we summarize in detail the recent advances in light-controlled swarming and assembly of CPs based on the interactions arisen from optical forces, photochemical reactions, photothermal effects, and photoisomerizations, as well as their potential applications. In the end, we also envision some challenges and future prospects of light-controlled swarming and assembly of CPs. With the increasing innovations in mechanisms and control strategies with easy operation, low cost, and arbitrary applicability, light-controlled swarming and assembly of CPs may be employed to manufacture programmable materials and reconfigurable robots for cooperative grasping, collective cargo transportation, and micro- and nanoengineering.

  9. Extreme nonfasting remnant cholesterol vs extreme LDL cholesterol as contributors to cardiovascular disease and all-cause mortality in 90000 individuals from the general population

    DEFF Research Database (Denmark)

    Varbo, Anette; Freiberg, Jacob J; Nordestgaard, Børge G

    2015-01-01

    BACKGROUND: Increased nonfasting remnant cholesterol, like increased LDL cholesterol, is causally associated with increased risk for ischemic heart disease (IHD). We tested the hypothesis that extreme concentrations of nonfasting remnant and LDL cholesterol are equal contributors to the risk of IHD......, myocardial infarction (MI), and all-cause mortality. METHODS: We compared stepwise increasing concentrations of nonfasting remnant and LDL cholesterol for association with risk of IHD, MI, and all-cause mortality in approximately 90 000 individuals from the Danish general population. During up to 22 years...... of complete follow-up, 4435 participants developed IHD, 1722 developed MI, and 8121 died. RESULTS: Compared with participants with nonfasting remnant cholesterol cholesterol of 0.5-0.99 mmol/L (19.3-38.2 mg/dL) to 2...

  10. High tobacco consumption is causally associated with increased all-cause mortality in a general population sample of 55 568 individuals, but not with short telomeres

    DEFF Research Database (Denmark)

    Rode, Line; Bojesen, Stig E; Weischer, Maren

    2014-01-01

    ,568 individuals including 32,823 ever smokers from the Danish general population, of whom 3430 died during 10 years of follow-up. All had telomere length measured, detailed information on smoking history, and CHRNA3 rs1051730 genotype, which is associated with tobacco consumption, determined. In a Mendelian...... randomization study, we conducted observational, genetic, and mediation analyses. RESULTS: First, tobacco consumption was 21.1 pack-years in non-carriers, 22.8 in heterozygotes and 24.8 in homozygotes (P-trend....12 [95% confidence interval (CI): 1.09, 1.15] per doubling in tobacco consumption. In Mendelian randomization analysis, the hazard ratio was 1.08 (1.02, 1.14) per minor CHRNA3 allele in ever smokers. Third, in observational analysis telomeres shortened with -13 base pairs (-18, -8) per doubling...

  11. Illustrating how mechanical assemblies work

    KAUST Repository

    Mitra, Niloy J.; Yang, Yongliang; Yan, Dongming; Li, Wilmot; Agrawala, Maneesh

    2010-01-01

    How things work visualizations use a variety of visual techniques to depict the operation of complex mechanical assemblies. We present an automated approach for generating such visualizations. Starting with a 3D CAD model of an assembly, we first infer the motions of individual parts and the interactions between parts based on their geometry and a few user specified constraints. We then use this information to generate visualizations that incorporate motion arrows, frame sequences and animation to convey the causal chain of motions and mechanical interactions between parts. We present results for a wide variety of assemblies. © 2010 ACM.

  12. Illustrating how mechanical assemblies work

    KAUST Repository

    Mitra, Niloy J.; Yang, Yongliang; Yan, Dongming; Li, Wilmot; Agrawala, Maneesh

    2013-01-01

    How-things-work visualizations use a variety of visual techniques to depict the operation of complex mechanical assemblies. We present an automated approach for generating such visualizations. Starting with a 3D CAD model of an assembly, we first infer the motions of the individual parts and the interactions across the parts based on their geometry and a few user-specified constraints. We then use this information to generate visualizations that incorporate motion arrows, frame sequences, and animation to convey the causal chain of motions and mechanical interactions across parts. We demonstrate our system on a wide variety of assemblies. © 2013 ACM 0001-0782/13/01.

  13. Illustrating how mechanical assemblies work

    KAUST Repository

    Mitra, Niloy J.

    2010-07-26

    How things work visualizations use a variety of visual techniques to depict the operation of complex mechanical assemblies. We present an automated approach for generating such visualizations. Starting with a 3D CAD model of an assembly, we first infer the motions of individual parts and the interactions between parts based on their geometry and a few user specified constraints. We then use this information to generate visualizations that incorporate motion arrows, frame sequences and animation to convey the causal chain of motions and mechanical interactions between parts. We present results for a wide variety of assemblies. © 2010 ACM.

  14. Frequency of CCR5 Delta-32 Mutation in Human Immunodeficiency Virus (HIV-seropositive and HIV-exposed Seronegative Individuals and in General Population of Medellin, Colombia

    Directory of Open Access Journals (Sweden)

    Francisco J Díaz

    2000-04-01

    Full Text Available Repeated exposure to human immunodeficiency virus (HIV does not always result in seroconversion. Modifications in coreceptors for HIV entrance to target cells are one of the factors that block the infection. We studied the frequency of Delta-32 mutation in ccr5 gene in Medellin, Colombia. Two hundred and eighteen individuals distributed in three different groups were analyzed for Delta-32 mutation in ccr5 gene by polymerase chain reaction (PCR: 29 HIV seropositive (SP, 39 exposed seronegative (ESN and 150 individuals as a general population sample (GPS. The frequency of the Delta-32 mutant allele was 3.8% for ESN, 2.7% for GPS and 1.7% for SP. Only one homozygous mutant genotype (Delta-32/Delta-32 was found among the ESN (2.6%. The heterozygous genotype (ccr5/Delta-32 was found in eight GPS (5.3%, in one SP (3.4% and in one ESN (2.6%. The differences in the allelic and genotypic frequencies among the three groups were not statistically significant. A comparison between the expected and the observed genotypic frequencies showed that these frequencies were significantly different for the ESN group, which indirectly suggests a protective effect of the mutant genotype (Delta-32/Delta-32. Since this mutant genotype explained the resistance of infection in only one of our ESN persons, different mechanisms of protection must be playing a more important role in this population.

  15. Fuel assembly

    International Nuclear Information System (INIS)

    Fujibayashi, Toru.

    1970-01-01

    Herein disclosed is a fuel assembly in which a fuel rod bundle is easily detachable by rotating a fuel rod fastener rotatably mounted to the upper surface of an upper tie-plate supporting a fuel bundle therebelow. A locking portion at the leading end of each fuel rod protrudes through the upper tie-plate and is engaged with or separated from the tie-plate by the rotation of the fastener. The removal of a desired fuel rod can therefore be remotely accomplished without the necessity of handling pawls, locking washers and nuts. (Owens, K.J.)

  16. Assembling consumption

    DEFF Research Database (Denmark)

    Assembling Consumption marks a definitive step in the institutionalisation of qualitative business research. By gathering leading scholars and educators who study markets, marketing and consumption through the lenses of philosophy, sociology and anthropology, this book clarifies and applies...... the investigative tools offered by assemblage theory, actor-network theory and non-representational theory. Clear theoretical explanation and methodological innovation, alongside empirical applications of these emerging frameworks will offer readers new and refreshing perspectives on consumer culture and market...... societies. This is an essential reading for both seasoned scholars and advanced students of markets, economies and social forms of consumption....

  17. Preface Results of the open session on "Documentation and monitoring of landslides and debris flows" for mathematical modelling and design of mitigation measures, held at the EGU General Assembly 2009

    Directory of Open Access Journals (Sweden)

    L. Franzi

    2011-05-01

    Full Text Available The papers that are here presented and summarised represent the recent scientific contributions of some authors coming from different countries and working in the fields of monitoring, modelling, mapping and design of mitigation measures against mass movements. The authors had the opportunity to present their recent advancements, discuss each other needs and set forth future research requirements during the 2009 EGU General Assembly, so that their scientific contributions can be considered the result of the debates and exchanges that were set among scientists and researchers, either personally or during the review phase since that date. In this resume, the scientific papers of the special issue are divided according to different thematic areas and summarised. The most innovative scientific approaches proposed in the special issue, regarding the monitoring methodologies, simulation techniques and laboratory equipment are described and summarised. The obtained results are very promising to keep on future research at a very satisfactory level.

  18. Low attendance at structured education for people with newly diagnosed type 2 diabetes: General practice characteristics and individual patient factors predict uptake.

    Science.gov (United States)

    Winkley, Kirsty; Stahl, Daniel; Chamley, Mark; Stopford, Rosanna; Boughdady, Monica; Thomas, Stephen; Amiel, Stephanie A; Forbes, Angus; Ismail, Khalida

    2016-01-01

    The aims were to determine the association between individual and neighbourhood factors and attendance at structured education amongst people with newly diagnosed type 2 diabetes (T2DM). Multi-level analysis of questionnaire data from a prospective cohort of adults newly diagnosed T2DM. Setting was primary care, London, UK. Main outcome was attendance at structured education within 2 years. Of 1790 people recruited, attendance data were available for 1626 (91%). Only 22.4% (n=365/1626) attended education. Attendance was independently associated with female gender (OR 1.28, 95% CI 1.05-1.46), lower HbA1c (OR 0.98 mmol/mol 95% CI 0.97-0.99) and non-smoker status (OR 1.36, 95% CI 1.07-1.55). General practice covariates, achievement of primary care targets for glycaemic control (OR 1.05, 95% C.I. 1.01-1.08) and recording of retinal screening (OR 0.96, 95% C.I. 0.93-0.99) were independently associated with attendance but unexplained general practice clustering accounted for 17% of the variance. Education uptake is low amongst people with new onset T2DM. Attenders are more likely to be female, non-smokers with better HbA1c. General practices achieving glycaemic targets are more likely to have patients who attend education. Strategies are needed to improve attendance at structured diabetes education particularly amongst hard to reach groups. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  19. Telomere shortening unrelated to smoking, body weight, physical activity, and alcohol intake: 4,576 general population individuals with repeat measurements 10 years apart.

    Directory of Open Access Journals (Sweden)

    Maren Weischer

    2014-03-01

    Full Text Available Cross-sectional studies have associated short telomere length with smoking, body weight, physical activity, and possibly alcohol intake; however, whether these associations are due to confounding is unknown. We tested these hypotheses in 4,576 individuals from the general population cross-sectionally, and with repeat measurement of relative telomere length 10 years apart. We also tested whether change in telomere length is associated with mortality and morbidity in the general population. Relative telomere length was measured with quantitative polymerase chain reaction. Cross-sectionally at the first examination, short telomere length was associated with increased age (P for trend across quartiles = 3 × 10(-77, current smoking (P = 8 × 10(-3, increased body mass index (P = 7 × 10(-14, physical inactivity (P = 4 × 10(-17, but not with increased alcohol intake (P = 0.10. At the second examination 10 years later, 56% of participants had lost and 44% gained telomere length with a mean loss of 193 basepairs. Change in leukocyte telomere length during 10 years was associated inversely with baseline telomere length (P<1 × 10(-300 and age at baseline (P = 1 × 10(-27, but not with baseline or 10-year inter-observational tobacco consumption, body weight, physical activity, or alcohol intake. Prospectively during a further 10 years follow-up after the second examination, quartiles of telomere length change did not associate with risk of all-cause mortality, cancer, chronic obstructive pulmonary disease, diabetes mellitus, ischemic cerebrovascular disease, or ischemic heart disease. In conclusion, smoking, increased body weight, and physical inactivity were associated with short telomere length cross-sectionally, but not with telomere length change during 10 years observation, and alcohol intake was associated with neither. Also, change in telomere length did not associate prospectively with mortality or morbidity in the general population.

  20. Fuel assembly

    International Nuclear Information System (INIS)

    Kurihara, Kunitoshi; Azekura, Kazuo.

    1992-01-01

    In a reactor core of a heavy water moderated light water cooled pressure tube type reactor, no sufficient effects have been obtained for the transfer width to a negative side of void reactivity change in a region of a great void coefficient. Then, a moderation region divided into upper and lower two regions is disposed at the central portion of a fuel assembly. Coolants flown into the lower region can be discharged to the cooling region from an opening disposed at the upper end portion of the lower region. Light water flows from the lower region of the moderator region to the cooling region of the reactor core upper portion, to lower the void coefficient. As a result, the reactivity performance at low void coefficient, i.e., a void reaction rate is transferred to the negative side. Thus, this flattens the power distribution in the fuel assembly, increases the thermal margin and enables rapid operaiton and control of the reactor core, as well as contributes to the increase of fuel burnup ratio and reduction of the fuel cycle cost. (N.H.)

  1. Fuel assembly

    International Nuclear Information System (INIS)

    Chaki, Masao; Nishida, Koji; Karasawa, Hidetoshi; Kanazawa, Toru; Orii, Akihito; Nagayoshi, Takuji; Kashiwai, Shin-ichi; Masuhara, Yasuhiro

    1998-01-01

    The present invention concerns a fuel assembly, for a BWR type nuclear reactor, comprising fuel rods in 9 x 9 matrix. The inner width of the channel box is about 132mm and the length of the fuel rods which are not short fuel rods is about 4m. Two water rods having a circular cross section are arranged on a diagonal line in a portion of 3 x 3 matrix at the center of the fuel assembly, and two fuel rods are disposed at vacant spaces, and the number of fuel rods is 74. Eight fuel rods are determined as short fuel rods among 74 fuel rods. Assuming the fuel inventory in the short fuel rod as X(kg), and the fuel inventory in the fuel rods other than the short fuel rods as Y(kg), X and Y satisfy the relation: X + Y ≥ 173m, Y ≤ - 9.7X + 292, Y ≤ - 0.3X + 203 and X > 0. Then, even when the short fuel rods are used, the fuel inventory is increased and fuel economy can be improved. (I.N.)

  2. Fuel assembly

    International Nuclear Information System (INIS)

    Fushimi, Atsushi; Shimada, Hidemitsu; Aoyama, Motoo; Nakajima, Junjiro

    1998-01-01

    In a fuel assembly for an n x n lattice-like BWR type reactor, n is determined to 9 or greater, and the enrichment degree of plutonium is determined to 4.4% by weight or less. Alternatively, n is determined to 10 or greater, and the enrichment degree of plutonium is determined to 5.2% by weight or less. An average take-out burnup degree is determined to 39GWd/t or less, and the matrix is determined to 9 x 9 or more, or the average take-out burnup degree is determined to 51GWd/t, and the matrix is determined to 10 x 10 or more and the increase of the margin of the maximum power density obtained thereby is utilized for the compensation of the increase of distortion of power distribution due to decrease of the kinds of plutonium enrichment degree, thereby enabling to reduce the kind of the enrichment degree of MOX fuel rods to one. As a result, the manufacturing step for fuel pellets can be simplified to reduce the manufacturing cost for MOX fuel assemblies. (N.H.)

  3. Fuel assembly

    International Nuclear Information System (INIS)

    Nomata, Terumitsu.

    1993-01-01

    Among fuel pellets to be loaded to fuel cans of a fuel assembly, fuel pellets having a small thermal power are charged in a region from the end of each of spacers up to about 50mm on the upstream of coolants that flow vertically at the periphery of fuel rods. Coolants at the periphery of fuel rods are heated by the heat generation, to result in voids. However, since cooling effect on the upstream of the spacers is low due to influences of the spacers. Further, since the fuel pellets disposed in the upstream region have small thermal power, a void coefficient is not increased. Even if a thermal power exceeding cooling performance should be generated, there is no worry of causing burnout in the upstream region. Even if burnout should be caused, safety margin and reliability relative to burnout are improved, to increase an allowable thermal power, thereby enabling to improve integrity and reliability of fuel rods and fuel assemblies. (N.H.)

  4. Differential effects of common variants in SCN2A on general cognitive ability, brain physiology, and messenger RNA expression in schizophrenia cases and control individuals.

    Science.gov (United States)

    Dickinson, Dwight; Straub, Richard E; Trampush, Joey W; Gao, Yuan; Feng, Ningping; Xie, Bin; Shin, Joo Heon; Lim, Hun Ki; Ursini, Gianluca; Bigos, Kristin L; Kolachana, Bhaskar; Hashimoto, Ryota; Takeda, Masatoshi; Baum, Graham L; Rujescu, Dan; Callicott, Joseph H; Hyde, Thomas M; Berman, Karen F; Kleinman, Joel E; Weinberger, Daniel R

    2014-06-01

    One approach to understanding the genetic complexity of schizophrenia is to study associated behavioral and biological phenotypes that may be more directly linked to genetic variation. To identify single-nucleotide polymorphisms associated with general cognitive ability (g) in people with schizophrenia and control individuals. Genomewide association study, followed by analyses in unaffected siblings and independent schizophrenia samples, functional magnetic resonance imaging studies of brain physiology in vivo, and RNA sequencing in postmortem brain samples. The discovery cohort and unaffected siblings were participants in the National Institute of Mental Health Clinical Brain Disorders Branch schizophrenia genetics studies. Additional schizophrenia cohorts were from psychiatric treatment settings in the United States, Japan, and Germany. The discovery cohort comprised 339 with schizophrenia and 363 community control participants. Follow-up analyses studied 147 unaffected siblings of the schizophrenia cases and independent schizophrenia samples including a total of an additional 668 participants. Imaging analyses included 87 schizophrenia cases and 397 control individuals. Brain tissue samples were available for 64 cases and 61 control individuals. We studied genomewide association with g, by group, in the discovery cohort. We used selected genotypes to test specific associations in unaffected siblings and independent schizophrenia samples. Imaging analyses focused on activation in the prefrontal cortex during working memory. Brain tissue studies yielded messenger RNA expression levels for RefSeq transcripts. The schizophrenia discovery cohort showed genomewide-significant association of g with polymorphisms in sodium channel gene SCN2A, accounting for 10.4% of g variance (rs10174400, P = 9.27 × 10(-10)). Control individuals showed a trend for g/genotype association with reversed allelic directionality. The genotype-by-group interaction was also genomewide

  5. Molecular recognition and self-assembly special feature: A general protocol for creating high-throughput screening assays for reaction yield and enantiomeric excess applied to hydrobenzoin.

    Science.gov (United States)

    Shabbir, Shagufta H; Regan, Clinton J; Anslyn, Eric V

    2009-06-30

    A general approach to high-throughput screening of enantiomeric excess (ee) and concentration was developed by using indicator displacement assays (IDAs), and the protocol was then applied to the vicinal diol hydrobenzoin. The method involves the sequential utilization of what we define herein as screening, training, and analysis plates. Several enantioselective boronic acid-based receptors were screened by using 96-well plates, both for their ability to discriminate the enantiomers of hydrobenzoin and to find their optimal pairing with indicators resulting in the largest optical responses. The best receptor/indicator combination was then used to train an artificial neural network to determine concentration and ee. To prove the practicality of the developed protocol, analysis plates were created containing true unknown samples of hydrobenzoin generated by established Sharpless asymmetric dihydroxylation reactions, and the best ligand was correctly identified.

  6. Challenges, Solutions, and Quality Metrics of Personal Genome Assembly in Advancing Precision Medicine

    Directory of Open Access Journals (Sweden)

    Wenming Xiao

    2016-04-01

    Full Text Available Even though each of us shares more than 99% of the DNA sequences in our genome, there are millions of sequence codes or structure in small regions that differ between individuals, giving us different characteristics of appearance or responsiveness to medical treatments. Currently, genetic variants in diseased tissues, such as tumors, are uncovered by exploring the differences between the reference genome and the sequences detected in the diseased tissue. However, the public reference genome was derived with the DNA from multiple individuals. As a result of this, the reference genome is incomplete and may misrepresent the sequence variants of the general population. The more reliable solution is to compare sequences of diseased tissue with its own genome sequence derived from tissue in a normal state. As the price to sequence the human genome has dropped dramatically to around $1000, it shows a promising future of documenting the personal genome for every individual. However, de novo assembly of individual genomes at an affordable cost is still challenging. Thus, till now, only a few human genomes have been fully assembled. In this review, we introduce the history of human genome sequencing and the evolution of sequencing platforms, from Sanger sequencing to emerging “third generation sequencing” technologies. We present the currently available de novo assembly and post-assembly software packages for human genome assembly and their requirements for computational infrastructures. We recommend that a combined hybrid assembly with long and short reads would be a promising way to generate good quality human genome assemblies and specify parameters for the quality assessment of assembly outcomes. We provide a perspective view of the benefit of using personal genomes as references and suggestions for obtaining a quality personal genome. Finally, we discuss the usage of the personal genome in aiding vaccine design and development, monitoring host

  7. DNA controlled assembly of liposomes

    DEFF Research Database (Denmark)

    Vogel, Stefan; Jakobsen, Ulla; Simonsen, Adam Cohen

    2009-01-01

    DNA-encoding of solid nanoparticles requires surfacechemistry, which is often tedious and not generally applicable. In the present study non-covalently attached DNA are used to assemble soft nanoparticles (liposomes) in solution. This process displays remarkably sharp thermal transitions from...... assembled to disassembled state for which reason this method allows easy and fast detection of polynucleotides (e.g. DNA or RNA), including single nucleotide polymorphisms as well as insertions and deletions....

  8. Another successful Doctoral Student Assembly

    CERN Multimedia

    Katarina Anthony

    2014-01-01

    On Wednesday 2 April, CERN hosted its third Doctoral Student Assembly in the Council Chamber.   CERN PhD students show off their posters in CERN's Main Building. Speaking to a packed house, Director-General Rolf Heuer gave the assembly's opening speech and introduced the poster session that followed. Seventeen CERN PhD students presented posters on their work, and were greeted by their CERN and University supervisors. It was a very successful event!

  9. Statement to the 33rd session of the General Conference of the International Atomic Energy Agency 25 September 1989. Statement to the 44th session of the United Nations General Assembly 25 October 1989

    International Nuclear Information System (INIS)

    Blix, H.

    1989-11-01

    The report briefly describes the environmental problem and the energy needs which form an essential background against which the nuclear power option must be considered. It also reviews the Agency's recent work in the fields of operational safety, waste disposal and the problem of radiation protection and the generally poor public understanding of this problem

  10. Assessing the general safety and tolerability of vildagliptin: value of pooled analyses from a large safety database versus evaluation of individual studies

    Science.gov (United States)

    Schweizer, Anja; Dejager, Sylvie; Foley, James E; Kothny, Wolfgang

    2011-01-01

    Aim: Analyzing safety aspects of a drug from individual studies can lead to difficult-to-interpret results. The aim of this paper is therefore to assess the general safety and tolerability, including incidences of the most common adverse events (AEs), of vildagliptin based on a large pooled database of Phase II and III clinical trials. Methods: Safety data were pooled from 38 studies of ≥12 to ≥104 weeks’ duration. AE profiles of vildagliptin (50 mg bid; N = 6116) were evaluated relative to a pool of comparators (placebo and active comparators; N = 6210). Absolute incidence rates were calculated for all AEs, serious AEs (SAEs), discontinuations due to AEs, and deaths. Results: Overall AEs, SAEs, discontinuations due to AEs, and deaths were all reported with a similar frequency in patients receiving vildagliptin (69.1%, 8.9%, 5.7%, and 0.4%, respectively) and patients receiving comparators (69.0%, 9.0%, 6.4%, and 0.4%, respectively), whereas drug-related AEs were seen with a lower frequency in vildagliptin-treated patients (15.7% vs 21.7% with comparators). The incidences of the most commonly reported specific AEs were also similar between vildagliptin and comparators, except for increased incidences of hypoglycemia, tremor, and hyperhidrosis in the comparator group related to the use of sulfonylureas. Conclusions: The present pooled analysis shows that vildagliptin was overall well tolerated in clinical trials of up to >2 years in duration. The data further emphasize the value of a pooled analysis from a large safety database versus assessing safety and tolerability from individual studies. PMID:21415917

  11. Assessing the general safety and tolerability of vildagliptin: value of pooled analyses from a large safety database versus evaluation of individual studies

    Directory of Open Access Journals (Sweden)

    Schweizer A

    2011-02-01

    Full Text Available Anja Schweizer1, Sylvie Dejager2, James E Foley3, Wolfgang Kothny31Novartis Pharma AG, Basel, Switzerland; 2Novartis Pharma SAS, Rueil-Malmaison, France; 3Novartis Pharmaceuticals Corporation, East Hanover, NJ, USAAim: Analyzing safety aspects of a drug from individual studies can lead to difficult-to-interpret results. The aim of this paper is therefore to assess the general safety and tolerability, including incidences of the most common adverse events (AEs, of vildagliptin based on a large pooled database of Phase II and III clinical trials.Methods: Safety data were pooled from 38 studies of ≥12 to ≥104 weeks' duration. AE profiles of vildagliptin (50 mg bid; N = 6116 were evaluated relative to a pool of comparators (placebo and active comparators; N = 6210. Absolute incidence rates were calculated for all AEs, serious AEs (SAEs, discontinuations due to AEs, and deaths.Results: Overall AEs, SAEs, discontinuations due to AEs, and deaths were all reported with a similar frequency in patients receiving vildagliptin (69.1%, 8.9%, 5.7%, and 0.4%, respectively and patients receiving comparators (69.0%, 9.0%, 6.4%, and 0.4%, respectively, whereas drug-related AEs were seen with a lower frequency in vildagliptin-treated patients (15.7% vs 21.7% with comparators. The incidences of the most commonly reported specific AEs were also similar between vildagliptin and comparators, except for increased incidences of hypoglycemia, tremor, and hyperhidrosis in the comparator group related to the use of sulfonylureas.Conclusions: The present pooled analysis shows that vildagliptin was overall well tolerated in clinical trials of up to >2 years in duration. The data further emphasize the value of a pooled analysis from a large safety database versus assessing safety and tolerability from individual studies.Keywords: type 2 diabetes, dipeptidyl peptidase-4, edema, safety, vildagliptin

  12. Fuel assembly

    International Nuclear Information System (INIS)

    Ueda, Makoto; Ogiya, Shunsuke.

    1989-01-01

    For improving the economy of a BWR type reactor by making the operation cycle longer, the fuel enrichment degree has to be increased further. However, this makes the subcriticality shallower in the upper portion of the reactor core, to bring about a possibility that the reactor shutdown becomes impossible. In the present invention, a portion of fuel rod is constituted as partial length fuel rods (P-fuel rods) in which the entire stack length in the effective portion is made shorter by reducing the concentration of fissionable materials in the axial portion. A plurality of moderator rods are disposed at least on one diagonal line of a fuel assembly and P-fuel rods are arranged at a position put between the moderator rods. This makes it possible to reactor shutdown and makes the axial power distribution satisfactory even if the fuel enrichment degree is increased. (T.M.)

  13. Fuel assembly

    International Nuclear Information System (INIS)

    Bando, Masaru.

    1993-01-01

    As neutron irradiation progresses on a fuel assembly of an FBR type reactor, a strong force is exerted to cause ruptures if the arrangement of fuel elements is not displaced, whereas the fuel elements may be brought into direct contact with each other not by way of spacers to cause burning damages if the arrangement is displaced. In the present invention, the circumference of fuel elements arranged in a normal triangle lattice is surrounded by a wrapper tube having a hexagonal cross section, wire spacers are wound therearound, and deformable spacers are distributed to optional positions for fuel elements in the wrapper tube. Interaction between the fuel elements caused by irradiation is effectively absorbed, thereby enabling to delay the occurrence of the rupture and burning damages of the elements. (N.H.)

  14. Fuel assembly

    International Nuclear Information System (INIS)

    Ueda, Makoto.

    1991-01-01

    In a fuel assembly in which spectral shift type moderator guide members are arranged, the moderator guide member has a flow channel resistance member, that provides flow resistance against the moderators, in the upstream of a moderator flowing channel, by which the ratio of removing coolants is set greater at the upstream than downstream. With such a constitution, the void distribution increasing upward in the channel box except for the portion of the moderator guide member is moderated by the increase of the area of the void region that expands downward in the guide member. Accordingly, the axial power distribution is flattened throughout the operation cycle and excess distortion is eliminated to improve the fuel integrity. (T.M.)

  15. Fuel assembly

    International Nuclear Information System (INIS)

    Wataumi, Kazutoshi; Tajiri, Hiroshi.

    1992-01-01

    In a fuel assembly of a BWR type reactor, a pellet to be loaded comprises an external layer of fissile materials containing burnable poisons and an internal layer of fissile materials not containing burnable poison. For example, there is provided a dual type pellet comprising an external layer made of UO 2 incorporated with Gd 2 O 3 at a predetermined concentration as the burnable poisons and an internal layer made of UO 2 not containing Gd 2 O 3 . The amount of the burnable poisons required for predetermined places is controlled by the thickness of the ring of the external layer. This can dissipate an unnecessary poisoning effect at the final stage of the combustion cycle. Further, since only one or a few kinds of powder mixture of the burnable poisons and the fissile materials is necessary, production and product control can be facilitated. (I.N.)

  16. Fuel assembly

    International Nuclear Information System (INIS)

    Ishibashi, Yoko; Aoyama, Motoo; Oyama, Jun-ichi.

    1995-01-01

    Burnable poison-incorporating fuel rods of a first group are disposed in a region in adjacent with a water rod having a large diameter (neutron moderator rod) disposed to the central portion of a fuel assembly. Burnable poison-incorporating fuel rods of a second group are disposed to a region other than peripheral zone in adjacent with a channel box and corners positioned at an inner zone, in adjacent with the channel box. The average concentration of burnable poisons of the burnable poison-incorporating fuel rods of the first group is made greater than that of the second group. With such a constitution, when the burnable poisons of the first group are burnt out, the burnable poisons of the second group are also burnt out at the same time. Accordingly, an amount of burnable poisons left unburnt at the final stage of the operation cycle is reduced, to improve the reactivity. This can improve the economical property. (I.N.)

  17. Fuel assemblies

    International Nuclear Information System (INIS)

    Yoshioka, Ritsuo.

    1983-01-01

    Purpose: To improve the operation performance of a BWR type reactor by improving the distribution of the uranium enrichment and the incorporation amount of burnable poisons in fuel assemblies. Constitution: The average enrichment of uranium 235 is increased in the upper portion as compared with that in the lower portion, while the incorporation amount of burnable poisons is increased in an upper portion as compared with that in the lower portion. The difference in the incorporation amount of the burnable poisons between the upper and lower portions is attained by charging two kinds of fuel rods; the ones incorporated with the burnable poisons over the entire length and the others incorporated with the burnable poisons only in the upper portions. (Seki, T.)

  18. Stoichiometric control of multiple different tectons in coordination-driven self-assembly: preparation of fused metallacyclic polygons.

    Science.gov (United States)

    Lee, Junseong; Ghosh, Koushik; Stang, Peter J

    2009-09-02

    We present a general strategy for the synthesis of stable, multicomponent fused polygon complexes in which coordination-driven self-assembly allows for single supramolecular species to be formed from multicomponent self-assembly and the shape of the obtained polygons can be controlled simply by changing the ratio of individual components. The compounds have been characterized by multinuclear NMR spectroscopy and electrospray ionization mass spectrometry.

  19. Mechanical seal assembly

    Science.gov (United States)

    Kotlyar, Oleg M.

    2001-01-01

    An improved mechanical seal assembly is provided for sealing rotating shafts with respect to their shaft housings, wherein the rotating shafts are subject to substantial axial vibrations. The mechanical seal assembly generally includes a rotating sealing ring fixed to the shaft, a non-rotating sealing ring adjacent to and in close contact with the rotating sealing ring for forming an annular seal about the shaft, and a mechanical diode element that applies a biasing force to the non-rotating sealing ring by means of hemispherical joint. The alignment of the mechanical diode with respect to the sealing rings is maintained by a series of linear bearings positioned axially along a desired length of the mechanical diode. Alternative embodiments include mechanical or hydraulic amplification components for amplifying axial displacement of the non-rotating sealing ring and transferring it to the mechanical diode.

  20. Mechanical Seal Assembly

    Energy Technology Data Exchange (ETDEWEB)

    Kotlyar, Oleg M.

    1999-06-18

    An improved mechanical seal assembly is provided for sealing rotating shafts with respect to their shaft housings, wherein the rotating shafts are subject to substantial axial vibrations. The mechanical seal assembly generally includes a rotating sealing ring fixed to the shaft, a non-rotating sealing ring adjacent to and in close contact with the rotating sealing ring for forming an annular seal about the shaft, and a mechanical diode element that applies a biasing force to the non-rotating sealing ring by means of hemispherical joint. The alignment of the mechanical diode with respect to the sealing rings is maintained by a series of linear bearings positioned axially along a desired length of the mechanical diode. Alternative embodiments include mechanical or hydraulic amplification components for amplifying axial displacement of the non-rotating sealing ring and transferring it to the mechanical diode.

  1. [Changes in the EEG spectral power during perception of neutral and emotionally salient words in schizophrenic patients, their relatives and healthy individuals from the general population].

    Science.gov (United States)

    Alfimova, M V; Uvarova, L G

    2007-01-01

    To search for EEG-correlates of emotional processing that might be indicators of genetic predisposition to schizophrenia, changes in EEG spectral power during perception of neutral and emotionally salient words were examined in 36 schizophrenic patients, 50 of their unaffected first-degree relatives, and 47 healthy individuals without any family history of psychoses. In healthy persons, passive listening to neutral words induced minimum changes in cortical rhythmical activity, predominantly in the form of synchronization of slow and fast waves, whereas perception of emotional words was followed by a generalized depression of the alpha and beta1 activity and a locally specific decrease in the power of theta and beta2 frequency bands. The patients and their relatives showed a decrease in the alpha and beta1 activity simultaneously with an increase in the power of delta activity in response to both groups of words. Thus, in the patients and their relatives, reactions to neutral and emotional words were ulterior as a result of augmented reactions to the neutral words. These findings suggest that the EEG changes reflect familial and possibly hereditable abnormal involuntary attention. No prominent decrease in reactivity to emotional stimuli was revealed in schizophrenic families.

  2. General recognition theory with individual differences: a new method for examining perceptual and decisional interactions with an application to face perception.

    Science.gov (United States)

    Soto, Fabian A; Vucovich, Lauren; Musgrave, Robert; Ashby, F Gregory

    2015-02-01

    A common question in perceptual science is to what extent different stimulus dimensions are processed independently. General recognition theory (GRT) offers a formal framework via which different notions of independence can be defined and tested rigorously, while also dissociating perceptual from decisional factors. This article presents a new GRT model that overcomes several shortcomings with previous approaches, including a clearer separation between perceptual and decisional processes and a more complete description of such processes. The model assumes that different individuals share similar perceptual representations, but vary in their attention to dimensions and in the decisional strategies they use. We apply the model to the analysis of interactions between identity and emotional expression during face recognition. The results of previous research aimed at this problem have been disparate. Participants identified four faces, which resulted from the combination of two identities and two expressions. An analysis using the new GRT model showed a complex pattern of dimensional interactions. The perception of emotional expression was not affected by changes in identity, but the perception of identity was affected by changes in emotional expression. There were violations of decisional separability of expression from identity and of identity from expression, with the former being more consistent across participants than the latter. One explanation for the disparate results in the literature is that decisional strategies may have varied across studies and influenced the results of tests of perceptual interactions, as previous studies lacked the ability to dissociate between perceptual and decisional interactions.

  3. Analysis of assembly serial number usage in domestic light-water reactors

    International Nuclear Information System (INIS)

    Reich, W.J.; Moore, R.S.

    1991-05-01

    Domestic light-water reactor (LWR) fuel assemblies are identified by a serial number that is placed on each assembly. These serial numbers are used as identifiers throughout the life of the fuel. The uniqueness of assembly serial numbers is important in determining their effectiveness as unambiguous identifiers. The purpose of this study is to determine what serial numbering schemes are used, the effectiveness of these schemes, and to quantify how many duplicate serial numbers occur on domestic LWR fuel assemblies. The serial numbering scheme adopted by the American National Standards Institute (ANSI) ensures uniqueness of assembly serial numbers. The latest numbering scheme adopted by General Electric (GE), was also found to be unique. Analysis of 70,971 fuel assembly serial numbers from permanently discharged fuel identified 11,948 serial number duplicates. Three duplicate serial numbers were found when analysis focused on duplication within the individual fuel inventory at each reactor site, but these were traced back to data entry errors and will be corrected by the Energy Information Administration (EIA). There were also three instances where the serial numbers used to identify assemblies used for hot cell studies differed from the serial numbers reported to the EIA. It is recommended that fuel fabricators and utilities adhere to the ANSI serial numbering scheme to ensure serial number uniqueness. In addition, organizations collecting serial number information, should request that all known serial numbers physically attached or associated with each assembly be reported and identified by the corresponding number scheme. 10 refs., 5 tabs

  4. [The Aut-idem Rule and the Importance of Patient-Individual Selection of Inhalers for the Therapy of Airway Diseases in Practices of Pneumologists and General Practitioners - Assessment and Implementation by Pneumologists and General Practitioners].

    Science.gov (United States)

    Hering, T; Andres, J; Mohrlang, C; Redeker, M; Schwarz, E

    2018-03-01

    Drug therapy of obstructive airway diseases mainly relies on inhaled medication. The success of this therapy depends primarily on the selection of the appropriate inhaler considering patient's choice and the correct application. The aut-idem-rule, an active exclusion of the optional substitution by the pharmacist, allows prescribing physicians to ensure the delivery of a particular inhaler, which was selected for that patient, who was trained to use specifically that inhaler. This survey shows that pneumologists and, to a greater extent general practitioners, do not consistently make use of this option, although they unanimously agree on the importance of targeted inhaler selection. As a result, patients may receive different inhalers in the pharmacy, where the inhaler is chosen under consideration of market-driven aspects such as rebate contracts or stock. This causes that patients get confused by the exchange of their inhaler. Thus the exchange of the inhaler by the pharmacist leads to uncertainty and application problems in patients. Hence, the success of the comparatively complex inhaled therapy is endangered. This could be prevented, if prescribing physicians were informed and supported consistently regarding the use of aut-idem exclusion to ensure an optimal therapy for each individual patient. © Georg Thieme Verlag KG Stuttgart · New York.

  5. Fuel assembly

    International Nuclear Information System (INIS)

    Hirukawa, Koji; Sakurada, Koichi.

    1992-01-01

    In a fuel assembly for a BWR type reactor, water rods or water crosses are disposed between fuel rods, and a value with a spring is disposed at the top of the coolant flow channel thereof, which opens a discharge port when pressure is increased to greater than a predetermined value. Further, a control element for the amount of coolant flow rate is inserted retractable to a control element guide tube formed at the lower portion of the water rod or the water cross. When the amount of control elements inserted to the control element guide tube is small and the inflown coolant flow rate is great, the void coefficient at the inside of the water rod is less than 5%. On the other hand, when the control elements are inserted, the flow resistance is increased, so that the void coefficient in the water rod is greater than 80%. When the pressure in the water rod is increased, the valve with the spring is raised to escape water or steams. Then, since the variation range of the change of the void coefficient can be controlled reliably by the amount of the control elements inserted, and nuclear fuel materials can be utilized effectively. (N.H.)

  6. Fuel assembly

    International Nuclear Information System (INIS)

    Hiraiwa, Koji; Ueda, Makoto

    1989-01-01

    In a fuel assembly used for a light water cooled reactor such as a BWR type reactor, a water rod is divided axially into an upper outer tube and a lower outer tube by means of a plug disposed from the lower end of a water rod to a position 1/4 - 1/2 of the entire length for the water rod. Inlet apertures and exit apertures for moderators are respectively perforated for the divided outer tube and upper and lower portions. Further, an upper inner tube with less neutron irradiation growing amount than the outer tube is perforated on the plug in the outer tube, while a lower inner tube with greater neutron irradiation growing amount than the outer tube is suspended from the lower surface of the plug in the outer tube. Then, the opening area for the exit apertures disposed to the upper outer tube and the lower outer tube is controlled depending on the difference of the neutron irradiation growing amount between the upper inner tube and the upper outer tube, and the difference of the neutron irradiation growing amount between the lower inner tube and the lower outer tube. This enables effective spectral shift operation and improve the fuel economy. (T.M.)

  7. Fuel assembly

    International Nuclear Information System (INIS)

    Yamazaki, Hajime.

    1995-01-01

    In a fuel assembly having fuel rods of different length, fuel pellets of mixed oxides of uranium and plutonium are loaded to a short fuel rod. The volume ratio of a pellet-loaded portion to a plenum portion of the short fuel rod is made greater than the volume ratio of a fuel rod to which uranium fuel pellets are loaded. In addition, the volume of the plenum portion of the short fuel rod is set greater depending on the plutonium content in the loaded fuel pellets. MOX fuel pellets are loaded on the short fuel rods having a greater degree of freedom relevant to the setting for the volume of the plenum portion compared with that of a long rod fuel, and the volume of the plenum portion is ensured greater depending on the plutonium content. Even if a large amount of FP gas and He gas are discharged from the MOX fuels compared with that from the uranium fuels, the internal pressure of the MOX fuel rod during operation is maintained substantially identical with that of the uranium fuel rod, so that a risk of generating excess stresses applied to the fuel cladding tubes and rupture of fuels are greatly reduced. (N.H.)

  8. Fuel assembly

    International Nuclear Information System (INIS)

    Nakajima, Akiyoshi; Bessho, Yasunori; Aoyama, Motoo; Koyama, Jun-ichi; Hirakawa, Hiromasa; Yamashita, Jun-ichi; Hayashi, Tatsuo

    1998-01-01

    In a fuel assembly of a BWR type reactor in which a water rod of a large diameter is disposed at the central portion, the cross sectional area perpendicular to the axial direction comprises a region a of a fuel rod group facing to a wide gap water region to which a control rod is inserted, a region b of a fuel rod group disposed on the side of the wide gap water region other than the region a, a region d of a fuel rod group facing to a narrow gap water region and a region c of a fuel rod group disposed on the side of the narrow gap water region other than the region d. When comparing an amount of fission products contained in the four regions relative to that in the entire regions and average enrichment degrees of fuel rods for the four regions, the relative amount and the average enrichment degree of the fuel rod group of the region a is minimized, and the relative amount and the average enrichment degree of the fuel rod group in the region b is maximized. Then, reactor shut down margin during cold operation can be improved while flattening the power in the cross section perpendicular to the axial direction. (N.H.)

  9. Fourth Doctoral Student Assembly

    CERN Multimedia

    Ingrid Haug

    2016-01-01

    On 10 May, over 130 PhD students and their supervisors, from both CERN and partner universities, gathered for the 4th Doctoral Student Assembly in the Council Chamber.   The assembly was followed by a poster session, at which eighteen doctoral students presented the outcome of their scientific work. The CERN Doctoral Student Programme currently hosts just over 200 students in applied physics, engineering, computing and science communication/education. The programme has been in place since 1985. It enables students to do their research at CERN for a maximum of three years and to work on a PhD thesis, which they defend at their University. The programme is steered by the TSC committee, which holds two selection committees per year, in June and December. The Doctoral Student Assembly was opened by the Director-General, Fabiola Gianotti, who stressed the importance of the programme in the scientific environment at CERN, emphasising that there is no more rewarding activity than lear...

  10. Individualizing Services, Individualizing Responsibility

    DEFF Research Database (Denmark)

    Garsten, Christina; Hollertz, Katarina; Jacobsson, Kerstin

    possibilities for individual voice, autonomy and self-determination in the local delivery of activation policy? What barriers do specific organisational models and practices imply for clients to choose, determine and access tailor-made programmes and services? What policy technologies are at work in governing......-oriented, and the normative demands placed on individuals appear increasingly totalizing, concerning the whole individual rather than the job-related aspects only. The paper is based on 23 in-depth interviews with individual clients as well as individual caseworkers and other professionals engaged in client-related work...

  11. Protocol for the 'e-Nudge trial': a randomised controlled trial of electronic feedback to reduce the cardiovascular risk of individuals in general practice [ISRCTN64828380

    Science.gov (United States)

    Holt, Tim A; Thorogood, Margaret; Griffiths, Frances; Munday, Stephen

    2006-01-01

    Background Cardiovascular disease (including coronary heart disease and stroke) is a major cause of death and disability in the United Kingdom, and is to a large extent preventable, by lifestyle modification and drug therapy. The recent standardisation of electronic codes for cardiovascular risk variables through the United Kingdom's new General Practice contract provides an opportunity for the application of risk algorithms to identify high risk individuals. This randomised controlled trial will test the benefits of an automated system of alert messages and practice searches to identify those at highest risk of cardiovascular disease in primary care databases. Design Patients over 50 years old in practice databases will be randomised to the intervention group that will receive the alert messages and searches, and a control group who will continue to receive usual care. In addition to those at high estimated risk, potentially high risk patients will be identified who have insufficient data to allow a risk estimate to be made. Further groups identified will be those with possible undiagnosed diabetes, based either on elevated past recorded blood glucose measurements, or an absence of recent blood glucose measurement in those with established cardiovascular disease. Outcome measures The intervention will be applied for two years, and outcome data will be collected for a further year. The primary outcome measure will be the annual rate of cardiovascular events in the intervention and control arms of the study. Secondary measures include the proportion of patients at high estimated cardiovascular risk, the proportion of patients with missing data for a risk estimate, and the proportion with undefined diabetes status at the end of the trial. PMID:16646967

  12. Protocol for the 'e-Nudge trial': a randomised controlled trial of electronic feedback to reduce the cardiovascular risk of individuals in general practice [ISRCTN64828380

    Directory of Open Access Journals (Sweden)

    Griffiths Frances

    2006-04-01

    Full Text Available Abstract Background Cardiovascular disease (including coronary heart disease and stroke is a major cause of death and disability in the United Kingdom, and is to a large extent preventable, by lifestyle modification and drug therapy. The recent standardisation of electronic codes for cardiovascular risk variables through the United Kingdom's new General Practice contract provides an opportunity for the application of risk algorithms to identify high risk individuals. This randomised controlled trial will test the benefits of an automated system of alert messages and practice searches to identify those at highest risk of cardiovascular disease in primary care databases. Design Patients over 50 years old in practice databases will be randomised to the intervention group that will receive the alert messages and searches, and a control group who will continue to receive usual care. In addition to those at high estimated risk, potentially high risk patients will be identified who have insufficient data to allow a risk estimate to be made. Further groups identified will be those with possible undiagnosed diabetes, based either on elevated past recorded blood glucose measurements, or an absence of recent blood glucose measurement in those with established cardiovascular disease. Outcome measures The intervention will be applied for two years, and outcome data will be collected for a further year. The primary outcome measure will be the annual rate of cardiovascular events in the intervention and control arms of the study. Secondary measures include the proportion of patients at high estimated cardiovascular risk, the proportion of patients with missing data for a risk estimate, and the proportion with undefined diabetes status at the end of the trial.

  13. Association between driving pressure and development of postoperative pulmonary complications in patients undergoing mechanical ventilation for general anaesthesia: a meta-analysis of individual patient data.

    Science.gov (United States)

    Neto, Ary Serpa; Hemmes, Sabrine N T; Barbas, Carmen S V; Beiderlinden, Martin; Fernandez-Bustamante, Ana; Futier, Emmanuel; Gajic, Ognjen; El-Tahan, Mohamed R; Ghamdi, Abdulmohsin A Al; Günay, Ersin; Jaber, Samir; Kokulu, Serdar; Kozian, Alf; Licker, Marc; Lin, Wen-Qian; Maslow, Andrew D; Memtsoudis, Stavros G; Reis Miranda, Dinis; Moine, Pierre; Ng, Thomas; Paparella, Domenico; Ranieri, V Marco; Scavonetto, Federica; Schilling, Thomas; Selmo, Gabriele; Severgnini, Paolo; Sprung, Juraj; Sundar, Sugantha; Talmor, Daniel; Treschan, Tanja; Unzueta, Carmen; Weingarten, Toby N; Wolthuis, Esther K; Wrigge, Hermann; Amato, Marcelo B P; Costa, Eduardo L V; de Abreu, Marcelo Gama; Pelosi, Paolo; Schultz, Marcus J

    2016-04-01

    Protective mechanical ventilation strategies using low tidal volume or high levels of positive end-expiratory pressure (PEEP) improve outcomes for patients who have had surgery. The role of the driving pressure, which is the difference between the plateau pressure and the level of positive end-expiratory pressure is not known. We investigated the association of tidal volume, the level of PEEP, and driving pressure during intraoperative ventilation with the development of postoperative pulmonary complications. We did a meta-analysis of individual patient data from randomised controlled trials of protective ventilation during general anesthaesia for surgery published up to July 30, 2015. The main outcome was development of postoperative pulmonary complications (postoperative lung injury, pulmonary infection, or barotrauma). We included data from 17 randomised controlled trials, including 2250 patients. Multivariate analysis suggested that driving pressure was associated with the development of postoperative pulmonary complications (odds ratio [OR] for one unit increase of driving pressure 1·16, 95% CI 1·13-1·19; pprotective ventilation on development of pulmonary complications (p=0·027). In two studies that compared low with high PEEP during low tidal volume ventilation, an increase in the level of PEEP that resulted in an increase in driving pressure was associated with more postoperative pulmonary complications (OR 3·11, 95% CI 1·39-6·96; p=0·006). In patients having surgery, intraoperative high driving pressure and changes in the level of PEEP that result in an increase of driving pressure are associated with more postoperative pulmonary complications. However, a randomised controlled trial comparing ventilation based on driving pressure with usual care is needed to confirm these findings. None. Copyright © 2016 Elsevier Ltd. All rights reserved.

  14. Extreme nonfasting remnant cholesterol vs extreme LDL cholesterol as contributors to cardiovascular disease and all-cause mortality in 90000 individuals from the general population.

    Science.gov (United States)

    Varbo, Anette; Freiberg, Jacob J; Nordestgaard, Børge G

    2015-03-01

    Increased nonfasting remnant cholesterol, like increased LDL cholesterol, is causally associated with increased risk for ischemic heart disease (IHD). We tested the hypothesis that extreme concentrations of nonfasting remnant and LDL cholesterol are equal contributors to the risk of IHD, myocardial infarction (MI), and all-cause mortality. We compared stepwise increasing concentrations of nonfasting remnant and LDL cholesterol for association with risk of IHD, MI, and all-cause mortality in approximately 90 000 individuals from the Danish general population. During up to 22 years of complete follow-up, 4435 participants developed IHD, 1722 developed MI, and 8121 died. Compared with participants with nonfasting remnant cholesterol cholesterol of 0.5-0.99 mmol/L (19.3-38.2 mg/dL) to 2.4 (1.9-2.9) for remnant cholesterol of ≥1.5 mmol/L (58 mg/dL) (P for trend LDL cholesterol LDL cholesterol of 3-3.99 mmol/L (115.8-154 mg/dL) to 2.3 (1.9-2.8) for LDL cholesterol of ≥5 mmol/L (193 mg/dL) (P cholesterol (P LDL cholesterol (P cholesterol concentrations were associated stepwise with all-cause mortality ranging from hazard ratio 1.0 (0.9-1.1) to 1.6 (1.4-1.9) (P LDL cholesterol concentrations were associated with decreased all-cause mortality risk in a U-shaped pattern, with hazard ratios from 0.8 (0.7-0.8) to 0.9 (0.8-1.0) (P = 0.002). After mutual adjustment, LDL cholesterol best predicted MI, and remnant cholesterol best predicted all-cause mortality. Both lipoproteins were associated equally with risk of IHD and MI; however, only nonfasting remnant cholesterol concentrations were associated stepwise with increased all-cause mortality risk. © 2015 American Association for Clinical Chemistry.

  15. Boundary curves of individual items in the distribution of total depressive symptom scores approximate an exponential pattern in a general population.

    Science.gov (United States)

    Tomitaka, Shinichiro; Kawasaki, Yohei; Ide, Kazuki; Akutagawa, Maiko; Yamada, Hiroshi; Furukawa, Toshiaki A; Ono, Yutaka

    2016-01-01

    Previously, we proposed a model for ordinal scale scoring in which individual thresholds for each item constitute a distribution by each item. This lead us to hypothesize that the boundary curves of each depressive symptom score in the distribution of total depressive symptom scores follow a common mathematical model, which is expressed as the product of the frequency of the total depressive symptom scores and the probability of the cumulative distribution function of each item threshold. To verify this hypothesis, we investigated the boundary curves of the distribution of total depressive symptom scores in a general population. Data collected from 21,040 subjects who had completed the Center for Epidemiologic Studies Depression Scale (CES-D) questionnaire as part of a national Japanese survey were analyzed. The CES-D consists of 20 items (16 negative items and four positive items). The boundary curves of adjacent item scores in the distribution of total depressive symptom scores for the 16 negative items were analyzed using log-normal scales and curve fitting. The boundary curves of adjacent item scores for a given symptom approximated a common linear pattern on a log normal scale. Curve fitting showed that an exponential fit had a markedly higher coefficient of determination than either linear or quadratic fits. With negative affect items, the gap between the total score curve and boundary curve continuously increased with increasing total depressive symptom scores on a log-normal scale, whereas the boundary curves of positive affect items, which are not considered manifest variables of the latent trait, did not exhibit such increases in this gap. The results of the present study support the hypothesis that the boundary curves of each depressive symptom score in the distribution of total depressive symptom scores commonly follow the predicted mathematical model, which was verified to approximate an exponential mathematical pattern.

  16. Boundary curves of individual items in the distribution of total depressive symptom scores approximate an exponential pattern in a general population

    Directory of Open Access Journals (Sweden)

    Shinichiro Tomitaka

    2016-10-01

    Full Text Available Background Previously, we proposed a model for ordinal scale scoring in which individual thresholds for each item constitute a distribution by each item. This lead us to hypothesize that the boundary curves of each depressive symptom score in the distribution of total depressive symptom scores follow a common mathematical model, which is expressed as the product of the frequency of the total depressive symptom scores and the probability of the cumulative distribution function of each item threshold. To verify this hypothesis, we investigated the boundary curves of the distribution of total depressive symptom scores in a general population. Methods Data collected from 21,040 subjects who had completed the Center for Epidemiologic Studies Depression Scale (CES-D questionnaire as part of a national Japanese survey were analyzed. The CES-D consists of 20 items (16 negative items and four positive items. The boundary curves of adjacent item scores in the distribution of total depressive symptom scores for the 16 negative items were analyzed using log-normal scales and curve fitting. Results The boundary curves of adjacent item scores for a given symptom approximated a common linear pattern on a log normal scale. Curve fitting showed that an exponential fit had a markedly higher coefficient of determination than either linear or quadratic fits. With negative affect items, the gap between the total score curve and boundary curve continuously increased with increasing total depressive symptom scores on a log-normal scale, whereas the boundary curves of positive affect items, which are not considered manifest variables of the latent trait, did not exhibit such increases in this gap. Discussion The results of the present study support the hypothesis that the boundary curves of each depressive symptom score in the distribution of total depressive symptom scores commonly follow the predicted mathematical model, which was verified to approximate an

  17. Fuel assembly for a nuclear reactor

    International Nuclear Information System (INIS)

    Gjertsen, R.K.; Tower, S.N.; Huckestein, E.A.

    1982-01-01

    A fuel assembly for a nuclear reactor comprises a 5x5 array of guide tubes in a generally 20x20 array of fuel elements, the guide tubes being arranged to accommodate either control rods or water displacer rods. The fuel assembly has top and bottom Inconel (Registered Trade Mark) grids and intermediate Zircaloy grids in engagement with the guide tubes and supporting the fuel elements and guide tubes while allowing flow of reactor coolant through the assembly. (author)

  18. ORCODE.77: a computer routine to control a nuclear physics experiment by a PDP-15 + CAMAC system, written in assembler language and including many new routines of general interest

    International Nuclear Information System (INIS)

    Dickens, J.K.; McConnell, J.W.

    1977-01-01

    ORCODE.77 is a versatile data-handling computer routine written in MACRO (assembler) language for a PDP-15 computer with EAE (extended arithmetic capability) connected to a CAMAC interface. The Interrupt feature of the computer is utilized. Although the code is oriented for a specific experimental problem, there are many routines of general interest, including a CAMAC Scaler handler, an executive routine to interpret and act upon three-character teletype commands, concise routines to type out double-precision integers (both octal and decimal) and floating-point numbers and to read in integers and floating-point numbers, a routine to convert to and from PDP-15 FORTRAN-IV floating-point format, a routine to handle clock interrupts, and our own DECTAPE handling routine. Routines having specific applications which are applicable to other very similar applications include a display routine using CAMAC instructions, control of external mechanical equipment using CAMAC instructions, storage of data from an Analog-to-digital Converter, analysis of stored data into time-dependent pulse-height spectra, and a routine to read the contents of a Nuclear Data 5050 Analyzer and to prepare DECTAPE output of these data for subsequent analysis by a code written in PDP-15-compiled FORTRAN-IV

  19. Flow resistance in rod assemblies

    International Nuclear Information System (INIS)

    Korsun, A.S.; Sokolova, M.S.

    2000-01-01

    The general form of relation between the resistance force and the velocity vector, resistance tensor structure and possible types of anisotropy in the flow thorough such structures as rod or tube assemblies are under discussion. Some questions of experimental determination of volumetric resistance force tensor are also under consideration. (author)

  20. Comparing Memory-Efficient Genome Assemblers on Stand-Alone and Cloud Infrastructures

    KAUST Repository

    Kleftogiannis, Dimitrios A.; Kalnis, Panos; Bajic, Vladimir B.

    2013-01-01

    methodologies, we propose two general assembly strategies that can improve short-read assembly approaches and result in reduction of the memory footprint. Finally, we discuss the possibility of utilizing cloud infrastructures for genome assembly and we comment

  1. An Introduction to Generalized Estimating Equations and an Application to Assess Selectivity Effects in a Longitudinal Study on Very Old Individuals

    Science.gov (United States)

    Ghisletta, Paolo; Spini, Dario

    2004-01-01

    Correlated data are very common in the social sciences. Most common applications include longitudinal and hierarchically organized (or clustered) data. Generalized estimating equations (GEE) are a convenient and general approach to the analysis of several kinds of correlated data. The main advantage of GEE resides in the unbiased estimation of…

  2. Newnes electronics assembly handbook

    CERN Document Server

    Brindley, Keith

    2013-01-01

    Newnes Electronics Assembly Handbook: Techniques, Standards and Quality Assurance focuses on the aspects of electronic assembling. The handbook first looks at the printed circuit board (PCB). Base materials, basic mechanical properties, cleaning of assemblies, design, and PCB manufacturing processes are then explained. The text also discusses surface mounted assemblies and packaging of electromechanical assemblies, as well as the soldering process. Requirements for the soldering process; solderability and protective coatings; cleaning of PCBs; and mass solder/component reflow soldering are des

  3. Alcohol dependence and physical comorbidity: Increased prevalence but reduced relevance of individual comorbidities for hospital-based mortality during a 12.5-year observation period in general hospital admissions in urban North-West England.

    Science.gov (United States)

    Schoepf, D; Heun, R

    2015-06-01

    Alcohol dependence (AD) is associated with an increase in physical comorbidities. The effects of these diseases on general hospital-based mortality are unclear. Consequently, we conducted a mortality study in which we investigated if the burden of physical comorbidities and their relevance on general hospital-based mortality differs between individuals with and without AD during a 12.5-year observation period in general hospital admissions. During 1 January 2000 and 30 June 2012, 23,371 individuals with AD were admitted at least once to seven General Manchester Hospitals. Their physical comorbidities with a prevalence≥1% were compared to those of 233,710 randomly selected hospital controls, group-matched for age and gender (regardless of primary admission diagnosis or specialized treatments). Physical comorbidities that increased the risk of hospital-based mortality (but not outside of the hospital) during the observation period were identified using multiple logistic regression analyses. Hospital-based mortality rates were 20.4% in the AD sample and 8.3% in the control sample. Individuals with AD compared to controls had a higher burden of physical comorbidities, i.e. alcoholic liver and pancreatic diseases, diseases of the conducting airways, neurological and circulatory diseases, diseases of the upper gastrointestinal tract, renal diseases, cellulitis, iron deficiency anemia, fracture neck of femur, and peripheral vascular disease. In contrast, coronary heart related diseases, risk factors of cardiovascular disease, diverticular disease and cataracts were less frequent in individuals with AD than in controls. Thirty-two individual physical comorbidities contributed to the prediction of hospital-based mortality in univariate analyses in the AD sample; alcoholic liver disease (33.7%), hypertension (16.9%), chronic obstructive pulmonary disease (14.1%), and pneumonia (13.3%) were the most frequent diagnoses in deceased individuals with AD. Multiple forward

  4. Discrimination of individuals in a general population at high-risk for alcoholic and non-alcoholic fatty liver disease based on liver stiffness: a cross section study

    Directory of Open Access Journals (Sweden)

    Kasai Kenji

    2011-06-01

    Full Text Available Abstract Background Factors associated with liver stiffness (LS are unknown and normal reference values for LS have not been established. Individuals at high risk for alcoholic (ALD and non-alcoholic fatty (NAFLD liver disease need to be non-invasively discriminated during routine health checks. Factors related to LS measured using a FibroScan and normal reference values for LS are presented in this report. Methods We measured LS using a FibroScan in 416 consecutive individuals who presented for routine medical checks. We also investigated the relationship between LS and age, body mass index (BMI, liver function (LF, alcohol consumption, and fatty liver determined by ultrasonography. We identified individuals at high-risk for ALD and NAFLD as having a higher LS value than the normal upper limit detected in 171 healthy controls. Results The LS value for all individuals was 4.7 +/- 1.5 kPa (mean +/- SD and LS significantly and positively correlated with BMI and LF test results. The LS was significantly higher among individuals with, than without fatty liver. Liver stiffness in the 171 healthy controls was 4.3 +/- 0.81 kPa and the upper limit of LS in the normal controls was 5.9 kPa. We found that 60 (14.3% of 416 study participants had abnormal LS. The proportion of individuals whose LS values exceeded the normal upper limit was over five-fold higher among those with, than without fatty liver accompanied by abnormal LF test results. Conclusions Liver stiffness could be used to non-invasively monitor the progression of chronic liver diseases and to discriminate individuals at high risk for ALD and NAFLD during routine health assessments.

  5. Effect of general anaesthesia on functional outcome in patients with anterior circulation ischaemic stroke having endovascular thrombectomy versus standard care: a meta-analysis of individual patient data

    NARCIS (Netherlands)

    Campbell, Bruce C. V.; van Zwam, Wim H.; Goyal, Mayank; Menon, Bijoy K.; Dippel, Diederik W. J.; Demchuk, Andrew M.; Bracard, Serge; White, Philip; Dávalos, Antoni; Majoie, Charles B. L. M.; van der Lugt, Aad; Ford, Gary A.; de la Ossa, Natalia Pérez; Kelly, Michael; Bourcier, Romain; Donnan, Geoffrey A.; Roos, Yvo B. W. E. M.; Bang, Oh Young; Nogueira, Raul G.; Devlin, Thomas G.; van den Berg, Lucie A.; Clarençon, Frédéric; Burns, Paul; Carpenter, Jeffrey; Berkhemer, Olvert A.; Yavagal, Dileep R.; Pereira, Vitor Mendes; Ducrocq, Xavier; Dixit, Anand; Quesada, Helena; Epstein, Jonathan; Davis, Stephen M.; Jansen, Olav; Rubiera, Marta; Urra, Xabier; Nederkoorn, Paul J.; Emmer, Bart J.; Bot, Joseph C. J.; Marquering, Henk A.; Sprengers, Marieke E. S.; Beenen, Ludo F. M.; van den Berg, René; Fleitour, Nadine; Santos, Emilie; Borst, Jordi; Jansen, Ivo; Kappelhof, Manon; Lucas, Marit; Barros, Renan Sales; Koch, S.

    2018-01-01

    Background General anaesthesia (GA) during endovascular thrombectomy has been associated with worse patient outcomes in observational studies compared with patients treated without GA. We assessed functional outcome in ischaemic stroke patients with large vessel anterior circulation occlusion

  6. Comparing de novo assemblers for 454 transcriptome data.

    Science.gov (United States)

    Kumar, Sujai; Blaxter, Mark L

    2010-10-16

    Roche 454 pyrosequencing has become a method of choice for generating transcriptome data from non-model organisms. Once the tens to hundreds of thousands of short (250-450 base) reads have been produced, it is important to correctly assemble these to estimate the sequence of all the transcripts. Most transcriptome assembly projects use only one program for assembling 454 pyrosequencing reads, but there is no evidence that the programs used to date are optimal. We have carried out a systematic comparison of five assemblers (CAP3, MIRA, Newbler, SeqMan and CLC) to establish best practices for transcriptome assemblies, using a new dataset from the parasitic nematode Litomosoides sigmodontis. Although no single assembler performed best on all our criteria, Newbler 2.5 gave longer contigs, better alignments to some reference sequences, and was fast and easy to use. SeqMan assemblies performed best on the criterion of recapitulating known transcripts, and had more novel sequence than the other assemblers, but generated an excess of small, redundant contigs. The remaining assemblers all performed almost as well, with the exception of Newbler 2.3 (the version currently used by most assembly projects), which generated assemblies that had significantly lower total length. As different assemblers use different underlying algorithms to generate contigs, we also explored merging of assemblies and found that the merged datasets not only aligned better to reference sequences than individual assemblies, but were also more consistent in the number and size of contigs. Transcriptome assemblies are smaller than genome assemblies and thus should be more computationally tractable, but are often harder because individual contigs can have highly variable read coverage. Comparing single assemblers, Newbler 2.5 performed best on our trial data set, but other assemblers were closely comparable. Combining differently optimal assemblies from different programs however gave a more credible

  7. Comparing de novo assemblers for 454 transcriptome data

    Directory of Open Access Journals (Sweden)

    Blaxter Mark L

    2010-10-01

    Full Text Available Abstract Background Roche 454 pyrosequencing has become a method of choice for generating transcriptome data from non-model organisms. Once the tens to hundreds of thousands of short (250-450 base reads have been produced, it is important to correctly assemble these to estimate the sequence of all the transcripts. Most transcriptome assembly projects use only one program for assembling 454 pyrosequencing reads, but there is no evidence that the programs used to date are optimal. We have carried out a systematic comparison of five assemblers (CAP3, MIRA, Newbler, SeqMan and CLC to establish best practices for transcriptome assemblies, using a new dataset from the parasitic nematode Litomosoides sigmodontis. Results Although no single assembler performed best on all our criteria, Newbler 2.5 gave longer contigs, better alignments to some reference sequences, and was fast and easy to use. SeqMan assemblies performed best on the criterion of recapitulating known transcripts, and had more novel sequence than the other assemblers, but generated an excess of small, redundant contigs. The remaining assemblers all performed almost as well, with the exception of Newbler 2.3 (the version currently used by most assembly projects, which generated assemblies that had significantly lower total length. As different assemblers use different underlying algorithms to generate contigs, we also explored merging of assemblies and found that the merged datasets not only aligned better to reference sequences than individual assemblies, but were also more consistent in the number and size of contigs. Conclusions Transcriptome assemblies are smaller than genome assemblies and thus should be more computationally tractable, but are often harder because individual contigs can have highly variable read coverage. Comparing single assemblers, Newbler 2.5 performed best on our trial data set, but other assemblers were closely comparable. Combining differently optimal assemblies

  8. Insulation assembly for electric machine

    Science.gov (United States)

    Rhoads, Frederick W.; Titmuss, David F.; Parish, Harold; Campbell, John D.

    2013-10-15

    An insulation assembly is provided that includes a generally annularly-shaped main body and at least two spaced-apart fingers extending radially inwards from the main body. The spaced-apart fingers define a gap between the fingers. A slot liner may be inserted within the gap. The main body may include a plurality of circumferentially distributed segments. Each one of the plurality of segments may be operatively connected to another of the plurality of segments to form the continuous main body. The slot liner may be formed as a single extruded piece defining a plurality of cavities. A plurality of conductors (extendable from the stator assembly) may be axially inserted within a respective one of the plurality of cavities. The insulation assembly electrically isolates the conductors in the electric motor from the stator stack and from other conductors.

  9. Assembly and control of large microtubule complexes

    Science.gov (United States)

    Korolev, Kirill; Ishihara, Keisuke; Mitchison, Timothy

    Motility, division, and other cellular processes require rapid assembly and disassembly of microtubule structures. We report a new mechanism for the formation of asters, radial microtubule complexes found in very large cells. The standard model of aster growth assumes elongation of a fixed number of microtubules originating from the centrosomes. However, aster morphology in this model does not scale with cell size, and we found evidence for microtubule nucleation away from centrosomes. By combining polymerization dynamics and auto-catalytic nucleation of microtubules, we developed a new biophysical model of aster growth. The model predicts an explosive transition from an aster with a steady-state radius to one that expands as a travelling wave. At the transition, microtubule density increases continuously, but aster growth rate discontinuously jumps to a nonzero value. We tested our model with biochemical perturbations in egg extract and confirmed main theoretical predictions including the jump in the growth rate. Our results show that asters can grow even though individual microtubules are short and unstable. The dynamic balance between microtubule collapse and nucleation could be a general framework for the assembly and control of large microtubule complexes. NIH GM39565; Simons Foundation 409704; Honjo International 486 Scholarship Foundation.

  10. Ultrasonic calibration assembly

    International Nuclear Information System (INIS)

    1981-01-01

    Ultrasonic transducers for in-service inspection of nuclear reactor vessels have several problems associated with them which this invention seeks to overcome. The first is that of calibration or referencing a zero start point for the vertical axis of transducer movement to locate a weld defect. The second is that of verifying the positioning (vertically or at a predetermined angle). Thirdly there is the problem of ascertaining the speed per unit distance in the operating medium of the transducer beam prior to the actual inspection. The apparatus described is a calibration assembly which includes a fixed, generally spherical body having a surface for reflecting an ultrasonic beam from one of the transducers which can be moved until the reflection from the spherical body is the highest amplitude return signal indicating radial alignment from the body. (U.K.)

  11. Haplotype assembly in polyploid genomes and identical by descent shared tracts.

    Science.gov (United States)

    Aguiar, Derek; Istrail, Sorin

    2013-07-01

    Genome-wide haplotype reconstruction from sequence data, or haplotype assembly, is at the center of major challenges in molecular biology and life sciences. For complex eukaryotic organisms like humans, the genome is vast and the population samples are growing so rapidly that algorithms processing high-throughput sequencing data must scale favorably in terms of both accuracy and computational efficiency. Furthermore, current models and methodologies for haplotype assembly (i) do not consider individuals sharing haplotypes jointly, which reduces the size and accuracy of assembled haplotypes, and (ii) are unable to model genomes having more than two sets of homologous chromosomes (polyploidy). Polyploid organisms are increasingly becoming the target of many research groups interested in the genomics of disease, phylogenetics, botany and evolution but there is an absence of theory and methods for polyploid haplotype reconstruction. In this work, we present a number of results, extensions and generalizations of compass graphs and our HapCompass framework. We prove the theoretical complexity of two haplotype assembly optimizations, thereby motivating the use of heuristics. Furthermore, we present graph theory-based algorithms for the problem of haplotype assembly using our previously developed HapCompass framework for (i) novel implementations of haplotype assembly optimizations (minimum error correction), (ii) assembly of a pair of individuals sharing a haplotype tract identical by descent and (iii) assembly of polyploid genomes. We evaluate our methods on 1000 Genomes Project, Pacific Biosciences and simulated sequence data. HapCompass is available for download at http://www.brown.edu/Research/Istrail_Lab/. Supplementary data are available at Bioinformatics online.

  12. 19 CFR 10.18 - Valuation of assembled articles.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Valuation of assembled articles. 10.18 Section 10... THE TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. General Provisions Articles Assembled Abroad with United States Components § 10.18 Valuation of assembled articles. As in the case of...

  13. Does Variation in the Extent of Generalized Trust, Individual Education and Extensiveness of Social Security Policies Matter for Maximization of Subjective Well-Being?

    Science.gov (United States)

    Valeeva, Rania F.

    2016-01-01

    In this paper, I examine whether generalized trust and education, as well as social security policies of welfare state institutions matter for cross-national differences in subjective well-being (SWB), because knowledge on this issue is still lacking. For this purpose I integrated the insights of two sociological theories: Social Function…

  14. Theory of Connectivity: Nature and Nurture of Cell Assemblies and Cognitive Computation.

    Science.gov (United States)

    Li, Meng; Liu, Jun; Tsien, Joe Z

    2016-01-01

    Richard Semon and Donald Hebb are among the firsts to put forth the notion of cell assembly-a group of coherently or sequentially-activated neurons-to represent percept, memory, or concept. Despite the rekindled interest in this century-old idea, the concept of cell assembly still remains ill-defined and its operational principle is poorly understood. What is the size of a cell assembly? How should a cell assembly be organized? What is the computational logic underlying Hebbian cell assemblies? How might Nature vs. Nurture interact at the level of a cell assembly? In contrast to the widely assumed randomness within the mature but naïve cell assembly, the Theory of Connectivity postulates that the brain consists of the developmentally pre-programmed cell assemblies known as the functional connectivity motif (FCM). Principal cells within such FCM is organized by the power-of-two-based mathematical principle that guides the construction of specific-to-general combinatorial connectivity patterns in neuronal circuits, giving rise to a full range of specific features, various relational patterns, and generalized knowledge. This pre-configured canonical computation is predicted to be evolutionarily conserved across many circuits, ranging from these encoding memory engrams and imagination to decision-making and motor control. Although the power-of-two-based wiring and computational logic places a mathematical boundary on an individual's cognitive capacity, the fullest intellectual potential can be brought about by optimized nature and nurture. This theory may also open up a new avenue to examining how genetic mutations and various drugs might impair or improve the computational logic of brain circuits.

  15. Fuel assembly guide tube

    International Nuclear Information System (INIS)

    Jabsen, F.S.

    1979-01-01

    This invention is directed toward a nuclear fuel assembly guide tube arrangement which restrains spacer grid movement due to coolant flow and which offers secondary means for supporting a fuel assembly during handling and transfer operations

  16. Boundary curves of individual items in the distribution of total depressive symptom scores approximate an exponential pattern in a general population

    OpenAIRE

    Tomitaka, Shinichiro; Kawasaki, Yohei; Ide, Kazuki; Akutagawa, Maiko; Yamada, Hiroshi; Furukawa, Toshiaki A.; Ono, Yutaka

    2016-01-01

    [Background]Previously, we proposed a model for ordinal scale scoring in which individual thresholds for each item constitute a distribution by each item. This lead us to hypothesize that the boundary curves of each depressive symptom score in the distribution of total depressive symptom scores follow a common mathematical model, which is expressed as the product of the frequency of the total depressive symptom scores and the probability of the cumulative distribution function of each item th...

  17. Polymer Directed Protein Assemblies

    NARCIS (Netherlands)

    van Rijn, Patrick

    2013-01-01

    Protein aggregation and protein self-assembly is an important occurrence in natural systems, and is in some form or other dictated by biopolymers. Very obvious influences of biopolymers on protein assemblies are, e. g., virus particles. Viruses are a multi-protein assembly of which the morphology is

  18. Nuclear reactor fuel assembly

    International Nuclear Information System (INIS)

    Sasaki, Y.; Tashima, J.

    1975-01-01

    A description is given of nuclear reactor fuel assemblies arranged in the form of a lattice wherein there is attached to the interface of one of two adjacent fuel assemblies a plate spring having a concave portion curved toward said interface and to the interface of the other fuel assembly a plate spring having a convex portion curved away from said interface

  19. Diet, exercise, obesity, smoking and alcohol consumption in cancer survivors and the general population: a comparative study of 16 282 individuals.

    Science.gov (United States)

    Wang, Z; McLoone, P; Morrison, D S

    2015-02-03

    Cancer survivors may be particularly motivated to improve their health behaviours. We compared health behaviours and obesity in cancer survivors with the general population, using household survey and cancer registry data. Cancer survivors were more likely than those with no history of cancer to eat fruit and vegetables (ORadj 1.41, 95% CI 1.19-1.66), less likely to engage in physical activity (ORadj 0.79, 95% CI 0.67-0.93) and more likely to have stopped smoking (ORadj 1.25, 95% CI 1.09-1.44). Most health-related behaviours were better in cancer survivors than the general population, but low physical activity levels may be amenable to health promotion interventions.

  20. Sensor mount assemblies and sensor assemblies

    Science.gov (United States)

    Miller, David H [Redondo Beach, CA

    2012-04-10

    Sensor mount assemblies and sensor assemblies are provided. In an embodiment, by way of example only, a sensor mount assembly includes a busbar, a main body, a backing surface, and a first finger. The busbar has a first end and a second end. The main body is overmolded onto the busbar. The backing surface extends radially outwardly relative to the main body. The first finger extends axially from the backing surface, and the first finger has a first end, a second end, and a tooth. The first end of the first finger is disposed on the backing surface, and the tooth is formed on the second end of the first finger.

  1. Safety for fuel assembly handling in the nuclear ship Mutsu

    International Nuclear Information System (INIS)

    Ando, Yoshio

    1978-01-01

    The safety for fuel assembly handling in the nuclear ship Mutsu is deliberated by the committee of general inspection and repair technique examination for Mutsu. The result of deliberation for both cases of removing fuel assemblies and keeping them in the reactor is outlined. The specification of fuel assemblies, and the nuclides and designed radioactivity of fission products of fuel are described. The possibility of shielding repair work and general safety inspection keeping the fuel assemblies in the reactor, the safety consideration when the fuel assemblies are removed at a quay, in a dry dock and on the ocean, the safety of fuel transport in special casks and fuel storage are explained. It is concluded finally that the safety of shielding repair work and general inspection work is secured when the fuel assemblies are kept in the reactor and also when the fuel assemblies are removed from the reactor by cautious working. (Nakai, Y.)

  2. Hapsembler: An Assembler for Highly Polymorphic Genomes

    Science.gov (United States)

    Donmez, Nilgun; Brudno, Michael

    As whole genome sequencing has become a routine biological experiment, algorithms for assembly of whole genome shotgun data has become a topic of extensive research, with a plethora of off-the-shelf methods that can reconstruct the genomes of many organisms. Simultaneously, several recently sequenced genomes exhibit very high polymorphism rates. For these organisms genome assembly remains a challenge as most assemblers are unable to handle highly divergent haplotypes in a single individual. In this paper we describe Hapsembler, an assembler for highly polymorphic genomes, which makes use of paired reads. Our experiments show that Hapsembler produces accurate and contiguous assemblies of highly polymorphic genomes, while performing on par with the leading tools on haploid genomes. Hapsembler is available for download at http://compbio.cs.toronto.edu/hapsembler.

  3. [Individual parameters of general low-frequency magnetic therapy as a possibility for improving the clinical efficacy of the combined treatment of patients with essential arterial hypertension].

    Science.gov (United States)

    Fedotov, V D; Maslov, A G; Lobkaeva, E P; Krylov, V N; Obukhova, E O

    2012-01-01

    A new approach is proposed for the choice of low-frequency magnetic therapy on an individual basis using the results of analysis of heart rhythm variability. The clinical efficiency of low-frequency magnetic therapy incorporated in the combined treatment of 65 patients aged between 25 and 45 years with essential arterial hypertension was estimated. The statistically significant positive effects of the treatment included normalization of blood pressure and characteristics of heart rhythm variability as well as resolution of clinical symptoms of vegetative dysregulation.

  4. Soldering in electronics assembly

    CERN Document Server

    Judd, Mike

    2013-01-01

    Soldering in Electronics Assembly discusses several concerns in soldering of electronic assemblies. The book is comprised of nine chapters that tackle different areas in electronic assembly soldering. Chapter 1 discusses the soldering process itself, while Chapter 2 covers the electronic assemblies. Chapter 3 talks about solders and Chapter 4 deals with flux. The text also tackles the CS and SC soldering process. The cleaning of soldered assemblies, solder quality, and standards and specifications are also discussed. The book will be of great use to professionals who deal with electronic assem

  5. Nuclear fuel string assembly

    International Nuclear Information System (INIS)

    Ip, A.K.; Koyanagi, K.; Tarasuk, W.R.

    1976-01-01

    A method of fabricating rodded fuels suitable for use in pressure tube type reactors and in pressure vessel type reactors is described. Fuel rods are secured as an inner and an outer sub-assembly, each rod attached between mounting rings secured to the rod ends. The two sub-assemblies are telescoped together and positioned by spaced thimbles located between them to provide precise positioning while permittng differential axial movement between the sub-assemblies. Such sub-assemblies are particularly suited for mounting as bundle strings. The method provides particular advantages in the assembly of annular-section fuel pins, which includes booster fuel containing enriched fuel material. (LL)

  6. Nuclear reactor fuel assembly

    International Nuclear Information System (INIS)

    Marmonier, Pierre; Mesnage, Bernard; Nervi, J.C.

    1975-01-01

    This invention refers to fuel assemblies for a liquid metal cooled fast neutron reactor. Each assembly is composed of a hollow vertical casing, of regular polygonal section, containing a bundle of clad pins filled with a fissile or fertile substance. The casing is open at its upper end and has a cylindrical foot at its lower end for positioning the assembly in a housing provided in the horizontal diagrid, on which the core assembly rests. A set of flat bars located on the external surface of the casing enables it to be correctly orientated in its housing among the other core assemblies [fr

  7. Prevalence and impact of fibromyalgia on function and quality of life in individuals from the general population: results from a nationwide study in Spain.

    Science.gov (United States)

    Mas, A J; Carmona, L; Valverde, M; Ribas, B

    2008-01-01

    To estimate the prevalence of fibromyalgia (FM) and to compare some descriptive epidemiological and quality of life data between persons with and without FM criteria in a representative sample of the general Spanish population. Cross sectional study of 2,192 Spaniards aged 20 or above, selected by cluster sampling. Subjects were invited to a structured interview carried out by trained rheumatologists to ascertain various musculoskeletal disorders. The visit included screening and examination, validated instruments for measuring function (HAQ) and quality of life (SF-12) and questions about socio-demographic characteristics and musculoskeletal, mental, and other general symptoms. FM was suspected in subjects with widespread pain for more than three months. FM was defined by theAmerican College of Rheumatology classification criteria. All estimates are adjusted to sampling scheme. The prevalence of FM in Spain is 2.4% (95% CI: 1.5-3.2). FM is significantly more frequent in women (4.2%) than in men (0.2%), with an OR for women of 22.5 (95%CI: 7.2- 69.9), mainly in the 40-49 years age interval. It is more frequent in rural (4.1%) than in urban settings (1.7%), with an OR for rural settings of 2.5 (95%CI: 1.03-5.9). FM is associated with a low educational level, to a low social class, and to self-reported depression. The scores in the HAQ and in the SF-12 were significantly lower in FM subjects, despite adjustment by covariates. FM has a high prevalence in the general population. FM is associated to female gender, comorbidities, age between 40 and 59 years, and a rural setting. Persons fulfilling FM criteria show impaired functioning and quality of life.

  8. Poverty and health-related quality of life of people living in Hong Kong: comparison of individuals from low-income families and the general population.

    Science.gov (United States)

    Lam, Cindy Lo Kuen; Guo, Vivian Yawei; Wong, Carlos King Ho; Yu, Esther Yee Tak; Fung, Colman Siu Cheung

    2017-06-01

    To assess health-related quality of life (HRQOL) among Chinese adults from low-income households in Hong Kong, and to explore any threshold of household income that impaired HRQOL. A cross-sectional analysis was conducted on 298 adults from low-income families when they enrolled into a cohort study between 2012 and 2014. HRQOL was measured by the 12-item Short-Form Health Survey-version 2 (SF-12v2). Their mean SF-12v2 subscale and summary scores were compared with those of 596 age-sex-matched subjects randomly selected from a database of 2763 adults from the Hong Kong general population (ratio = 1:2). Multiple linear regressions were conducted to determine any association between monthly household income and HRQOL. Subjects from low-income households had significantly lower SF-12v2 bodily pain, general health, vitality and physical component summary (PCS) scores than the age-sex matched subjects from the general population. Subgroup analysis showed that a household income income in Hong Kong (HK$10 000 ≈ US$1290, i.e. poverty line in Hong Kong) was independently associated with poorer PCS and mental component summary (MCS) scores after adjustment for socio-demographics and co-morbidities. Chinese adults from low-income households had poorer HRQOL, and income seems to be the threshold for impairment of both physical and mental HRQOL. The findings support the current definition of the poverty line. © The Author 2016. Published by Oxford University Press on behalf of Faculty of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  9. Assembly, alignment and test of the Transiting Exoplanet Survey Satellite (TESS) optical assemblies

    Science.gov (United States)

    Balonek, Gregory; Brown, Joshua J.; Andre, James E.; Chesbrough, Christian D.; Chrisp, Michael P.; Dalpiaz, Michael; Lennon, Joseph; Richards, B. C.; Clark, Kristin E.

    2017-08-01

    The Transiting Exoplanet Survey Satellite (TESS) will carry four visible waveband, seven-element, refractive F/1.4 lenses, each with a 34 degree diagonal field of view. This paper describes the methods used for the assembly, alignment and test of the four flight optical assemblies. Prior to commencing the build of the four flight optical assemblies, a Risk Reduction Unit (RRU) was successfully assembled and tested [1]. The lessons learned from the RRU were applied to the build of the flight assemblies. The main modifications to the flight assemblies include the inking of the third lens element stray light mitigation, tighter alignment tolerances, and diamond turning for critical mechanical surfaces. Each of the optical assemblies was tested interferometrically and measured with a low coherence distance measuring interferometer (DMI) to predict the optimal shim thickness between the lens assembly and detector before -75°C environmental testing. In addition to individual test data, environmental test results from prior assemblies allow for the exploration of marginal performance differences between each of the optical assemblies.

  10. Liquid-liquid interfacial nanoparticle assemblies

    Science.gov (United States)

    Emrick, Todd S [South Deerfield, MA; Russell, Thomas P [Amherst, MA; Dinsmore, Anthony [Amherst, MA; Skaff, Habib [Amherst, MA; Lin, Yao [Amherst, MA

    2008-12-30

    Self-assembly of nanoparticles at the interface between two fluids, and methods to control such self-assembly process, e.g., the surface density of particles assembling at the interface; to utilize the assembled nanoparticles and their ligands in fabrication of capsules, where the elastic properties of the capsules can be varied from soft to tough; to develop capsules with well-defined porosities for ultimate use as delivery systems; and to develop chemistries whereby multiple ligands or ligands with multiple functionalities can be attached to the nanoparticles to promote the interfacial segregation and assembly of the nanoparticles. Certain embodiments use cadmium selenide (CdSe) nanoparticles, since the photoluminescence of the particles provides a convenient means by which the spatial location and organization of the particles can be probed. However, the systems and methodologies presented here are general and can, with suitable modification of the chemistries, be adapted to any type of nanoparticle.

  11. DSM-IV antisocial personality disorder and conduct disorder: evidence for taxonic structures among individuals with and without substance use disorders in the general population.

    Science.gov (United States)

    Kerridge, Bradley T; Saha, Tulshi D; Hasin, Deborah S

    2014-05-01

    The categorical-dimensional status of DSM-IV (Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition) conduct disorder (CD) and antisocial personality disorder (ASPD) is a source of controversy. This study examined whether the underlying structure of DSM-IV CD and ASPD was dimensional or categorical (taxonic) among individuals with and without substance use disorders. Using a national large representative survey of U.S. adults (n = 43,093), taxometric analyses of DSM-IV CD and ASPD diagnostic criteria were conducted on the total sample and among those with and without substance use disorders. Results of three taxometric procedures were consistent in showing that the structures underlying DSM-IV CD and ASPD were clearly taxonic in the total sample and among individuals with and without substance use disorders. Comparison curve fit indices exceeded 0.57 for each model. Taxonic findings of the present study were in contrast to the dimensional results of prior taxometric research among incarcerated samples with substantial comorbidity of antisocial syndromes and substance use disorders. Results supported the categorical representation and diagnostic thresholds of ASPD and CD as defined in DSM-IV and DSM-5. That the structure of ASPD and CD may be taxonic suggests that further research on these disorders use group comparative designs in which samples with and without these disorders are compared in terms of sociodemographic and clinical correlates, comorbidity, and treatment utilization. The taxonic structure of ASPD and CD may contribute to future research on causal processes through which these antisocial syndromes develop.

  12. DSM-IV Antisocial Personality Disorder and Conduct Disorder: Evidence for Taxonic Structures Among Individuals With and Without Substance Use Disorders in the General Population

    Science.gov (United States)

    Kerridge, Bradley T; Saha, Tulshi D; Hasin, Deborah S

    2014-01-01

    Objective: The categorical-dimensional status of DSM-IV (Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition) conduct disorder (CD) and antisocial personality disorder (ASPD) is a source of controversy. This study examined whether the underlying structure of DSM-IV CD and ASPD was dimensional or categorical (taxonic) among individuals with and without substance use disorders. Method: Using a national large representative survey of U.S. adults (n = 43,093), taxometric analyses of DSM-IV CD and ASPD diagnostic criteria were conducted on the total sample and among those with and without substance use disorders. Results: Results of three taxometric procedures were consistent in showing that the structures underlying DSM-IV CD and ASPD were clearly taxonic in the total sample and among individuals with and without substance use disorders. Comparison curve fit indices exceeded 0.57 for each model. Conclusions: Taxonic findings of the present study were in contrast to the dimensional results of prior taxometric research among incarcerated samples with substantial comorbidity of antisocial syndromes and substance use disorders. Results supported the categorical representation and diagnostic thresholds of ASPD and CD as defined in DSM-IV and DSM-5. That the structure of ASPD and CD may be taxonic suggests that further research on these disorders use group comparative designs in which samples with and without these disorders are compared in terms of sociodemographic and clinical correlates, comorbidity, and treatment utilization. The taxonic structure of ASPD and CD may contribute to future research on causal processes through which these antisocial syndromes develop. PMID:24766762

  13. Nuclear fuel assembly seismic amplitude limiter

    International Nuclear Information System (INIS)

    Anthony, A.J.

    1977-01-01

    The ability of a nuclear reactor to withstand high seismic loading is enhanced by including, on each fuel assembly, at least one seismic grid which reduces the magnitude of the possible lateral deflection of the individual fuel elements and the entire fuel assembly. The reduction in possible deflection minimizes the possibility of impact of the spacer grids of one fuel assembly on those of an adjacent fuel assembly and reduces the magnitude of forces associated with any such impact thereby minimizing the possibility of fuel assembly damage as a result of high seismic loading. The seismic grid is mounted from the fuel assembly guide tubes, has greater external dimensions when compared to the fuel assembly spacer grids and normally does not support or otherwise contact the fuel elements. The reduction in possible deflection is achieved through reduction of the clearance between adjacent fuel assemblies made possible by the use in the seismic grid of a high strength material characterized by favorable thermal expansion characteristics and minimal irradiation induced expansion

  14. Individual uncertainty and the uncertainty of science: The impact of perceived conflict and general self-efficacy on the perception of tentativeness and credibility of scientific information

    Directory of Open Access Journals (Sweden)

    Danny eFlemming

    2015-12-01

    Full Text Available We examined in two empirical studies how situational and personal aspects of uncertainty influence laypeople’s understanding of the uncertainty of scientific information, with focus on the detection of tentativeness and perception of scientific credibility. In the first study (N = 48, we investigated the impact of a perceived conflict due to contradicting information as a situational, text-inherent aspect of uncertainty. The aim of the second study (N = 61 was to explore the role of general self-efficacy as an intra-personal uncertainty factor. In Study 1, participants read one of two versions of an introductory text in a between-group design. This text provided them with an overview about the neurosurgical procedure of deep brain stimulation (DBS. The text expressed a positive attitude toward DBS in one experimental condition or focused on the negative aspects of this method in the other condition. Then participants in both conditions read the same text that dealt with a study about DBS as experimental treatment in a small sample of patients with major depression. Perceived conflict between the two texts was found to increase the perception of tentativeness and to decrease the perception of scientific credibility, implicating that text-inherent aspects have significant effects on critical appraisal. The results of Study 2 demonstrated that participants with higher general self-efficacy detected the tentativeness to a lesser degree and assumed a higher level of scientific credibility, indicating a more naïve understanding of scientific information. This appears to be contradictory to large parts of previous findings that showed positive effects of high self-efficacy on learning. Both studies showed that perceived tentativeness and perceived scientific credibility of medical information contradicted each other. We conclude that there is a need for supporting laypeople in understanding the uncertainty of scientific information and that

  15. Tenofovir use and renal insufficiency among pregnant and general adult population of HIV-infected, ART-naive individuals in Lilongwe, Malawi.

    Directory of Open Access Journals (Sweden)

    Derek C Johnson

    Full Text Available BACKGROUND: The Malawian government recently changed its prevention of mother-to-child transmission (PMTCT regimen and plans to change its first-line antiretroviral therapy (ART regimen to Tenofovir(TDF/Lamivudine/Efavirenz as a fixed-dose combination tablet. Implementation could be challenging if baseline creatinine clearance (CrCl screening were required to assess renal function prior to TDF therapy. Our goal is to determine predictors of CrCl<50 ml/min among HIV-infected, ART-naïve individuals. METHODOLOGY: Data on HIV-infected, ART-naïve adults screened for enrollment into 5 HIV clinical trials in Lilongwe, Malawi were combined for a pooled analysis of predictors for CrCl<50 ml/min. CrCl was derived from the Cockroft-Gault equation. Multivariable logistic regression modeled the association of age, body mass index (BMI, hemoglobin, CD4 cell count <350 cells/mm(3, gender, and pregnancy with CrCl<50 ml/min. RESULTS: The analysis included 3508 patients with values for creatinine clearance. Most subjects were female (90.6% with a median age of 26 years (IQR 22-29. The median CD4 cell count was 444 (IQR 298.0-561.0, and 85.2% percent of women in our study were pregnant. Few patients had CrCl<50 ml/min (n = 38, 1.1%. A BMI less than 18.5 in non-pregnant females (OR = 8.87, 95% CI = 2.45-32.09 was associated with CrCl<50 ml/min. Hemoglobin level higher than 10 g/dL in males (OR = 0.69, 95% CI = 0.56-0.86 and non-pregnant females (OR = 0.21, 95% CI = 0.04-0.97 was protective against CrCl<50 ml/min. DISCUSSION: Our findings indicate few patients would be excluded from a TDF-based antiretroviral regimen, suggesting baseline creatinine clearance assessment may not be necessary for implementation. However, in ART settings individuals with low BMI or anemia could potentially be at increased risk for lower CrCl.

  16. Simulated nuclear reactor fuel assembly

    International Nuclear Information System (INIS)

    Berta, V.T.

    1993-01-01

    An apparatus for electrically simulating a nuclear reactor fuel assembly. It includes a heater assembly having a top end and a bottom end and a plurality of concentric heater tubes having electrical circuitry connected to a power source, and radially spaced from each other. An outer target tube and an inner target tube is concentric with the heater tubes and with each other, and the outer target tube surrounds and is radially spaced from the heater tubes. The inner target tube is surrounded by and radially spaced from the heater tubes and outer target tube. The top of the assembly is generally open to allow for the electrical power connection to the heater tubes, and the bottom of the assembly includes means for completing the electrical circuitry in the heater tubes to provide electrical resistance heating to simulate the power profile in a nuclear reactor. The embedded conductor elements in each heater tube is split into two halves for a substantial portion of its length and provided with electrical isolation such that each half of the conductor is joined at one end and is not joined at the other end

  17. Self-Assembly of Microscale Parts through Magnetic and Capillary Interactions

    Directory of Open Access Journals (Sweden)

    Madan Dubey

    2011-03-01

    Full Text Available Self-assembly is a promising technique to overcome fundamental limitations with integrating, packaging, and general handling of individual electronic-related components with characteristic lengths significantly smaller than 1 mm. Here we describe the use of magnetic and capillary forces to self-assemble 280 µm sized silicon building blocks into interconnected structures which approach a three-dimensional crystalline configuration. Integrated permanent magnet microstructures provided magnetic forces, while a low-melting-point solder alloy provided capillary forces. A finite element model of forces between the magnetic features demonstrated the utility of magnetic forces at this size scale. Despite a slight departure from designed dimensions in the actual fabricated parts, the combination of magnetic and capillary forces improved the assembly yield to 8%, over approximately 0.1% achieved previously with capillary forces alone.

  18. Automated ensemble assembly and validation of microbial genomes

    Science.gov (United States)

    2014-01-01

    Background The continued democratization of DNA sequencing has sparked a new wave of development of genome assembly and assembly validation methods. As individual research labs, rather than centralized centers, begin to sequence the majority of new genomes, it is important to establish best practices for genome assembly. However, recent evaluations such as GAGE and the Assemblathon have concluded that there is no single best approach to genome assembly. Instead, it is preferable to generate multiple assemblies and validate them to determine which is most useful for the desired analysis; this is a labor-intensive process that is often impossible or unfeasible. Results To encourage best practices supported by the community, we present iMetAMOS, an automated ensemble assembly pipeline; iMetAMOS encapsulates the process of running, validating, and selecting a single assembly from multiple assemblies. iMetAMOS packages several leading open-source tools into a single binary that automates parameter selection and execution of multiple assemblers, scores the resulting assemblies based on multiple validation metrics, and annotates the assemblies for genes and contaminants. We demonstrate the utility of the ensemble process on 225 previously unassembled Mycobacterium tuberculosis genomes as well as a Rhodobacter sphaeroides benchmark dataset. On these real data, iMetAMOS reliably produces validated assemblies and identifies potential contamination without user intervention. In addition, intelligent parameter selection produces assemblies of R. sphaeroides comparable to or exceeding the quality of those from the GAGE-B evaluation, affecting the relative ranking of some assemblers. Conclusions Ensemble assembly with iMetAMOS provides users with multiple, validated assemblies for each genome. Although computationally limited to small or mid-sized genomes, this approach is the most effective and reproducible means for generating high-quality assemblies and enables users to

  19. Self-assembly kinetics of microscale components: A parametric evaluation

    Science.gov (United States)

    Carballo, Jose M.

    The goal of the present work is to develop, and evaluate a parametric model of a basic microscale Self-Assembly (SA) interaction that provides scaling predictions of process rates as a function of key process variables. At the microscale, assembly by "grasp and release" is generally challenging. Recent research efforts have proposed adapting nanoscale self-assembly (SA) processes to the microscale. SA offers the potential for reduced equipment cost and increased throughput by harnessing attractive forces (most commonly, capillary) to spontaneously assemble components. However, there are challenges for implementing microscale SA as a commercial process. The existing lack of design tools prevents simple process optimization. Previous efforts have characterized a specific aspect of the SA process. However, the existing microscale SA models do not characterize the inter-component interactions. All existing models have simplified the outcome of SA interactions as an experimentally-derived value specific to a particular configuration, instead of evaluating it outcome as a function of component level parameters (such as speed, geometry, bonding energy and direction). The present study parameterizes the outcome of interactions, and evaluates the effect of key parameters. The present work closes the gap between existing microscale SA models to add a key piece towards a complete design tool for general microscale SA process modeling. First, this work proposes a simple model for defining the probability of assembly of basic SA interactions. A basic SA interaction is defined as the event where a single part arrives on an assembly site. The model describes the probability of assembly as a function of kinetic energy, binding energy, orientation and incidence angle for the component and the assembly site. Secondly, an experimental SA system was designed, and implemented to create individual SA interactions while controlling process parameters independently. SA experiments

  20. Racial/ethnic disparities in service utilization for individuals with co-occurring mental health and substance use disorders in the general population: results from the national epidemiologic survey on alcohol and related conditions.

    Science.gov (United States)

    Hatzenbuehler, Mark L; Keyes, Katherine M; Narrow, William E; Grant, Bridget F; Hasin, Deborah S

    2008-07-01

    This study sought to determine whether black/white disparities in service utilization for mental health and substance use disorders persist or are diminished among individuals with psychiatric comorbidity in the general population. The 2001-2002 National Epidemiologic Survey on Alcohol and Related Conditions was used to identify individuals with lifetime co-occurring substance use disorders and mood/anxiety disorders (N = 4250; whites, N = 3597; blacks, N = 653). Lifetime service utilization for problems with mood, anxiety, alcohol, and drugs was assessed. Compared to whites, blacks with co-occurring mood or anxiety and substance use disorders were significantly less likely to receive services for mood or anxiety disorders, equally likely to receive services for alcohol use disorders, and more likely to receive some types of services for drug use disorders. Regardless of race/ethnicity, individuals with these co-occurring disorders were almost twice as likely to use services for mood/anxiety disorders than for substance use disorders. Despite the fact that comorbidity generally increases the likelihood of service use, black/white disparities in service utilization among an all-comorbid sample were found, although these disparities differed by type of disorder. Further research is warranted to understand the factors underlying these differences. Prevention and intervention strategies are needed to address the specific mental health needs of blacks with co-occurring disorders, as well as the overall lack of service use for substance use disorders among individuals with co-occurring psychiatric conditions.

  1. Individual differences in the perception of melodic contours and pitch-accent timing in speech: Support for domain-generality of pitch processing.

    Science.gov (United States)

    Morrill, Tuuli H; McAuley, J Devin; Dilley, Laura C; Hambrick, David Z

    2015-08-01

    Do the same mechanisms underlie processing of music and language? Recent investigations of this question have yielded inconsistent results. Likely factors contributing to discrepant findings are use of small samples and failure to control for individual differences in cognitive ability. We investigated the relationship between music and speech prosody processing, while controlling for cognitive ability. Participants (n = 179) completed a battery of cognitive ability tests, the Montreal Battery of Evaluation of Amusia (MBEA) to assess music perception, and a prosody test of pitch peak timing discrimination (early, as in insight vs. late, incite). Structural equation modeling revealed that only music perception was a significant predictor of prosody test performance. Music perception accounted for 34.5% of variance on prosody test performance; cognitive abilities and music training added only about 8%. These results indicate musical pitch and temporal processing are highly predictive of pitch discrimination in speech processing, even after controlling for other possible predictors of this aspect of language processing. (c) 2015 APA, all rights reserved).

  2. Magnetic self-assembly of small parts

    Science.gov (United States)

    Shetye, Sheetal B.

    Modern society's propensity for miniaturized end-user products is compelling electronic manufacturers to assemble and package different micro-scale, multi-technology components in more efficient and cost-effective manners. As the size of the components gets smaller, issues such as part sticking and alignment precision create challenges that slow the throughput of conventional robotic pick-n-place systems. As an alternative, various self-assembly approaches have been proposed to manipulate micro to millimeter scale components in a parallel fashion without human or robotic intervention. In this dissertation, magnetic self-assembly (MSA) is demonstrated as a highly efficient, completely parallel process for assembly of millimeter scale components. MSA is achieved by integrating permanent micromagnets onto component bonding surfaces using wafer-level microfabrication processes. Embedded bonded powder methods are used for fabrication of the magnets. The magnets are then magnetized using pulse magnetization methods, and the wafers are then singulated to form individual components. When the components are randomly mixed together, self-assembly occurs when the intermagnetic forces overcome the mixing forces. Analytical and finite element methods (FEM) are used to study the force interactions between the micromagnets. The multifunctional aspects of MSA are presented through demonstration of part-to-part and part-to-substrate assembly of 1 mm x 1mm x 0.5 mm silicon components. Part-to-part assembly is demonstrated by batch assembly of free-floating parts in a liquid environment with the assembly yield of different magnetic patterns varying from 88% to 90% in 20 s. Part-to-substrate assembly is demonstrated by assembling an ordered array onto a fixed substrate in a dry environment with the assembly yield varying from 86% to 99%. In both cases, diverse magnetic shapes/patterns are used to control the alignment and angular orientation of the components. A mathematical model is

  3. A classification scheme for LWR fuel assemblies

    Energy Technology Data Exchange (ETDEWEB)

    Moore, R.S.; Williamson, D.A.; Notz, K.J.

    1988-11-01

    With over 100 light water nuclear reactors operating nationwide, representing designs by four primary vendors, and with reload fuel manufactured by these vendors and additional suppliers, a wide variety of fuel assembly types are in existence. At Oak Ridge National Laboratory, both the Systems Integration Program and the Characteristics Data Base project required a classification scheme for these fuels. This scheme can be applied to other areas and is expected to be of value to many Office of Civilian Radioactive Waste Management programs. To develop the classification scheme, extensive information on the fuel assemblies that have been and are being manufactured by the various nuclear fuel vendors was compiled, reviewed, and evaluated. It was determined that it is possible to characterize assemblies in a systematic manner, using a combination of physical factors. A two-stage scheme was developed consisting of 79 assembly types, which are grouped into 22 assembly classes. The assembly classes are determined by the general design of the reactor cores in which the assemblies are, or were, used. The general BWR and PWR classes are divided differently but both are based on reactor core configuration. 2 refs., 15 tabs.

  4. A classification scheme for LWR fuel assemblies

    International Nuclear Information System (INIS)

    Moore, R.S.; Williamson, D.A.; Notz, K.J.

    1988-11-01

    With over 100 light water nuclear reactors operating nationwide, representing designs by four primary vendors, and with reload fuel manufactured by these vendors and additional suppliers, a wide variety of fuel assembly types are in existence. At Oak Ridge National Laboratory, both the Systems Integration Program and the Characteristics Data Base project required a classification scheme for these fuels. This scheme can be applied to other areas and is expected to be of value to many Office of Civilian Radioactive Waste Management programs. To develop the classification scheme, extensive information on the fuel assemblies that have been and are being manufactured by the various nuclear fuel vendors was compiled, reviewed, and evaluated. It was determined that it is possible to characterize assemblies in a systematic manner, using a combination of physical factors. A two-stage scheme was developed consisting of 79 assembly types, which are grouped into 22 assembly classes. The assembly classes are determined by the general design of the reactor cores in which the assemblies are, or were, used. The general BWR and PWR classes are divided differently but both are based on reactor core configuration. 2 refs., 15 tabs

  5. The impact of feedback valence and communication style on intrinsic motivation in middle childhood: Experimental evidence and generalization across individual differences.

    Science.gov (United States)

    Mabbe, Elien; Soenens, Bart; De Muynck, Gert-Jan; Vansteenkiste, Maarten

    2018-06-01

    Prior research among adolescents and emerging adults has provided evidence for the beneficial effects of positive (relative to negative) feedback and an autonomy-supportive (relative to a controlling) communication style on students' intrinsic motivation. Unfortunately, similar experimental research in middle childhood is lacking. Moreover, little attention has been paid to the question of whether individual differences in personality and perceived parenting play a role in these effects. In the current experimental study (N = 110; M age  = 10.71 years), children completed puzzles at school under one of four experimental conditions, thereby crossing normative feedback valence (i.e., positive vs. negative) with communication style (i.e., autonomy supportive vs. controlling). Prior to the experiment, children filled out questionnaires tapping into the Big Five personality traits and into perceived maternal autonomy support and psychological control. After the experimental induction, children rated several motivational constructs (i.e., intrinsic motivation and need-based experiences). In addition, their voluntary behavioral persistence in a subsequent challenging puzzle task was recorded objectively. Providing positive normative feedback in an autonomy-supportive way yielded the most favorable motivational outcomes. Both feedback valence and communication style yielded an independent impact on children's experiences of competence and autonomy during task engagement, which in turn helped to explain children's elevated intrinsic motivation, as reflected by their perceived interest and behavioral persistence. A few effects were moderated by children's perceived parenting and personality traits, but the number of interactions was limited. The discussion focuses on the motivating role of positive normative feedback and an autonomy-supportive communication style for children. Copyright © 2018 Elsevier Inc. All rights reserved.

  6. The prognosis for individuals on disability retirement An 18-year mortality follow-up study of 6887 men and women sampled from the general population

    Directory of Open Access Journals (Sweden)

    Eriksson Henry

    2006-04-01

    Full Text Available Abstract Background Several studies have shown a markedly higher mortality rate among disability pensioners than among non-retired. Since most disability pensions are granted because of non-fatal diseases the reason for the increased mortality therefore remains largely unknown. The aim of this study was to evaluate potential explanatory factors. Methods Data from five longitudinal cohort studies in Sweden, including 6,887 men and women less than 65 years old at baseline were linked to disability pension data, hospital admission data, and mortality data from 1971 until 2001. Mortality odds ratios were analyzed with Poisson regression and Cox's proportional hazards regression models. Results 1,683 (24.4% subjects had a disability pension at baseline or received one during follow up. 525 (7.6% subjects died during follow up. The subjects on disability pension had a higher mortality rate than the non-retired, the hazards ratio (HR being 2.78 (95%CI 2.08–3.71 among women and 3.43 (95%CI 2.61–4.51 among men. HR was highest among individuals granted a disability pension at young ages (HR >7, and declined parallel to age at which the disability pension was granted. The higher mortality rate among the retired subjects was not explained by disability pension cause or underlying disease or differences in age, marital status, educational level, smoking habits or drug abuse. There was no significant association between reason for disability pension and cause of death. Conclusion Subjects with a disability pension had increased mortality rates as compared with non-retired subjects, only modestly affected by adjustments for psycho-socio-economic factors, underlying disease, etcetera. It is unlikely that these factors were the causes of the unfavorable outcome. Other factors must be at work.

  7. Some Properties of the Assembly Neural Networks

    Czech Academy of Sciences Publication Activity Database

    Húsek, Dušan; Goltsev, A.

    2002-01-01

    Roč. 12, č. 1 (2002), s. 15-32 ISSN 1210-0552 R&D Projects: GA MŠk LN00B096 Keywords : neuron * neural assembly * neuural column subnetwork * generalization * recognition * perceptron * the nearest-neighbor method Subject RIV: BA - General Mathematics

  8. Assembly tool design

    International Nuclear Information System (INIS)

    Kanamori, Naokazu; Nakahira, Masataka; Ohkawa, Yoshinao; Tada, Eisuke; Seki, Masahiro

    1996-06-01

    The reactor core of the International Thermonuclear Experimental Reactor (ITER) is assembled with a number of large and asymmetric components within a tight tolerance in order to assure the structural integrity for various loads and to provide the tritium confinement. In addition, the assembly procedure should be compatible with remote operation since the core structures will be activated by 14-MeV neutrons once it starts operation and thus personal access will be prohibited. Accordingly, the assembly procedure and tool design are quite essential and should be designed from the beginning to facilitate remote operation. According to the ITER Design Task Agreement, the Japan Atomic Energy Research Institute (JAERI) has performed design study to develop the assembly procedures and associated tool design for the ITER tokamak assembly. This report describes outlines of the assembly tools and the remaining issues obtained in this design study. (author)

  9. Heart rate and autonomic response to stress after experimental induction of worry versus relaxation in healthy, high-worry, and generalized anxiety disorder individuals.

    Science.gov (United States)

    Fisher, Aaron J; Newman, Michelle G

    2013-04-01

    Generalized anxiety disorder (GAD) is the most commonly occurring anxiety disorder and has been related to cardiovascular morbidity such as cardiac ischemia, sudden cardiac death, and myocardial infarction. Both GAD and its cardinal symptom - worry - have been shown to promote muted physiological reactivity in response to laboratory and ecological stressors. Importantly, no study to date has examined the concurrent and relative contributions of trait and state worry within healthy controls, (non-clinical) high trait-worry controls, and GAD participants. The present study examined heart rate (HR), respiratory sinus arrhythmia (RSA), and salivary alpha-amylase (sAA) responses to laboratory stress during and following the experimental induction of worry versus relaxation in healthy controls (n=42), high trait worriers (n=33) and participants with GAD (n=76). All groups exhibited increased HR and decreased RSA in response to the stressor, with no differences by condition. Baseline sAA significantly moderated HR and RSA reactivity, such that higher sAA predicted greater increases in HR and decreases in RSA. There was a significant group by baseline sAA interaction such that in GAD, higher baseline sAA predicted decreased change in sAA during stress, whereas higher baseline sAA predicted greater sAA change in healthy controls. High-worry controls fell non-significantly between these groups. The present study provides additional evidence for the effect of worry on diminished HR stress response and points to possible suppression of adrenergic sympathetic stress responses in GAD. Copyright © 2013 Elsevier B.V. All rights reserved.

  10. Fuel assembly storage pool

    International Nuclear Information System (INIS)

    Hiranuma, Hiroshi.

    1976-01-01

    Object: To remove limitation of the number of storage of fuel assemblies to increase the number of storage thereof so as to relatively reduce the water depth required for shielding radioactive rays. Structure: Fuel assembly storage rack containers for receiving a plurality of spent fuel assembly racks are stacked in multi-layer fashion within a storage pool filled with water for shielding radioactive rays and removing heat. (Furukawa, Y.)

  11. Target Assembly Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Target Assembly Facility integrates new armor concepts into actual armored vehicles. Featuring the capability ofmachining and cutting radioactive materials, it...

  12. Composite turbine bucket assembly

    Science.gov (United States)

    Liotta, Gary Charles; Garcia-Crespo, Andres

    2014-05-20

    A composite turbine blade assembly includes a ceramic blade including an airfoil portion, a shank portion and an attachment portion; and a transition assembly adapted to attach the ceramic blade to a turbine disk or rotor, the transition assembly including first and second transition components clamped together, trapping said ceramic airfoil therebetween. Interior surfaces of the first and second transition portions are formed to mate with the shank portion and the attachment portion of the ceramic blade, and exterior surfaces of said first and second transition components are formed to include an attachment feature enabling the transition assembly to be attached to the turbine rotor or disk.

  13. Effect of general anaesthesia on functional outcome in patients with anterior circulation ischaemic stroke having endovascular thrombectomy versus standard care: a meta-analysis of individual patient data.

    Science.gov (United States)

    Campbell, Bruce C V; van Zwam, Wim H; Goyal, Mayank; Menon, Bijoy K; Dippel, Diederik W J; Demchuk, Andrew M; Bracard, Serge; White, Philip; Dávalos, Antoni; Majoie, Charles B L M; van der Lugt, Aad; Ford, Gary A; de la Ossa, Natalia Pérez; Kelly, Michael; Bourcier, Romain; Donnan, Geoffrey A; Roos, Yvo B W E M; Bang, Oh Young; Nogueira, Raul G; Devlin, Thomas G; van den Berg, Lucie A; Clarençon, Frédéric; Burns, Paul; Carpenter, Jeffrey; Berkhemer, Olvert A; Yavagal, Dileep R; Pereira, Vitor Mendes; Ducrocq, Xavier; Dixit, Anand; Quesada, Helena; Epstein, Jonathan; Davis, Stephen M; Jansen, Olav; Rubiera, Marta; Urra, Xabier; Micard, Emilien; Lingsma, Hester F; Naggara, Olivier; Brown, Scott; Guillemin, Francis; Muir, Keith W; van Oostenbrugge, Robert J; Saver, Jeffrey L; Jovin, Tudor G; Hill, Michael D; Mitchell, Peter J

    2018-01-01

    General anaesthesia (GA) during endovascular thrombectomy has been associated with worse patient outcomes in observational studies compared with patients treated without GA. We assessed functional outcome in ischaemic stroke patients with large vessel anterior circulation occlusion undergoing endovascular thrombectomy under GA, versus thrombectomy not under GA (with or without sedation) versus standard care (ie, no thrombectomy), stratified by the use of GA versus standard care. For this meta-analysis, patient-level data were pooled from all patients included in randomised trials in PuMed published between Jan 1, 2010, and May 31, 2017, that compared endovascular thrombectomy predominantly done with stent retrievers with standard care in anterior circulation ischaemic stroke patients (HERMES Collaboration). The primary outcome was functional outcome assessed by ordinal analysis of the modified Rankin scale (mRS) at 90 days in the GA and non-GA subgroups of patients treated with endovascular therapy versus those patients treated with standard care, adjusted for baseline prognostic variables. To account for between-trial variance we used mixed-effects modelling with a random effect for trials incorporated in all models. Bias was assessed using the Cochrane method. The meta-analysis was prospectively designed, but not registered. Seven trials were identified by our search; of 1764 patients included in these trials, 871 were allocated to endovascular thrombectomy and 893 were assigned standard care. After exclusion of 74 patients (72 did not undergo the procedure and two had missing data on anaesthetic strategy), 236 (30%) of 797 patients who had endovascular procedures were treated under GA. At baseline, patients receiving GA were younger and had a shorter delay between stroke onset and randomisation but they had similar pre-treatment clinical severity compared with patients who did not have GA. Endovascular thrombectomy improved functional outcome at 3 months both in

  14. DNA origami as a nanoscale template for protein assembly

    Energy Technology Data Exchange (ETDEWEB)

    Kuzyk, Anton; Laitinen, Kimmo T [Nanoscience Center, Department of Physics, University of Jyvaeskylae, PO Box 35, FIN-40014 (Finland); Toermae, Paeivi [Department of Applied Physics, Helsinki University of Technology, PO Box 5100, FIN-02015 (Finland)], E-mail: paivi.torma@hut.fi

    2009-06-10

    We describe two general approaches to the utilization of DNA origami structures for the assembly of materials. In one approach, DNA origami is used as a prefabricated template for subsequent assembly of materials. In the other, materials are assembled simultaneously with the DNA origami, i.e. the DNA origami technique is used to drive the assembly of materials. Fabrication of complex protein structures is demonstrated by these two approaches. The latter approach has the potential to be extended to the assembly of multiple materials with single attachment chemistry.

  15. DNA origami as a nanoscale template for protein assembly

    International Nuclear Information System (INIS)

    Kuzyk, Anton; Laitinen, Kimmo T; Toermae, Paeivi

    2009-01-01

    We describe two general approaches to the utilization of DNA origami structures for the assembly of materials. In one approach, DNA origami is used as a prefabricated template for subsequent assembly of materials. In the other, materials are assembled simultaneously with the DNA origami, i.e. the DNA origami technique is used to drive the assembly of materials. Fabrication of complex protein structures is demonstrated by these two approaches. The latter approach has the potential to be extended to the assembly of multiple materials with single attachment chemistry.

  16. ITER assembly and maintenance

    International Nuclear Information System (INIS)

    Honda, T.; Davis, F.; Lousteau, D.

    1991-01-01

    This document is intended to describe the work conducted by the ITER Assembly and Maintenance (A and M) Design Unit and the supporting home teams during the ITER Conceptual Design Activities, carried out from 1988 through 1990. Its content consists of two main sections, i.e., Chapter III, which describes the identified tasks to be performed by the A and M system and a general description of the required equipment; and Chapter IV, which provides a more detailed description of the equipment proposed to perform the assigned tasks. A two-stage R and D program is now planned, i.e., (1) a prototype equipment functional tests using full scale mock-ups and (2) a full scale integration demonstration test facility with real components (vacuum vessel with ports, blanket modules, divertor modules, armor tiles, etc.). Crucial in-vessel and ex-vessel operations and the associated remote handling equipment, including handling of divertor plates and blanket modules will be demonstrated in the first phase, whereby the database needed to proceed with the engineering phase will be acquired. The second phase will demonstrate the ability of the overall system to execute the required maintenance procedures and evaluate the performance of the prototype equipment

  17. Natural convection heat transfer within horizontal spent nuclear fuel assemblies

    International Nuclear Information System (INIS)

    Canaan, R.E.

    1995-12-01

    Natural convection heat transfer is experimentally investigated in an enclosed horizontal rod bundle, which characterizes a spent nuclear fuel assembly during dry storage and/or transport conditions. The basic test section consists of a square array of sixty-four stainless steel tubular heaters enclosed within a water-cooled rectangular copper heat exchanger. The heaters are supplied with a uniform power generation per unit length while the surrounding enclosure is maintained at a uniform temperature. The test section resides within a vacuum/pressure chamber in order to subject the assembly to a range of pressure statepoints and various backfill gases. The objective of this experimental study is to obtain convection correlations which can be used in order to easily incorporate convective effects into analytical models of horizontal spent fuel systems, and also to investigate the physical nature of natural convection in enclosed horizontal rod bundles in general. The resulting data consist of: (1) measured temperatures within the assembly as a function of power, pressure, and backfill gas; (2) the relative radiative contribution for the range of observed temperatures; (3) correlations of convective Nusselt number and Rayleigh number for the rod bundle as a whole; and (4) correlations of convective Nusselt number as a function of Rayleigh number for individual rods within the array

  18. Nuclear fuel assembly

    International Nuclear Information System (INIS)

    Delafosse, Jacques.

    1977-01-01

    This invention relates to a nuclear fuel assembly for a light or heavy water reactor, or for a fast reactor of the kind with a bundle of cladded pins, maintained parallel to each other in a regular network by an assembly of separate supporting grids, fitted with elastic bearing surfaces on these pins [fr

  19. Assembling Transgender Moments

    Science.gov (United States)

    Greteman, Adam J.

    2017-01-01

    In this article, the author seeks to assemble moments--scholarly, popular, and aesthetic--in order to explore the possibilities that emerge as moments collect in education's encounters with the needs, struggles, and possibilities of transgender lives and practices. Assembling moments, the author argues, illustrates the value of "moments"…

  20. Vertical pump assembly

    International Nuclear Information System (INIS)

    Dohnal, M.; Rosel, J.; Skarka, V.

    1988-01-01

    The mounting is described of the drive assembly of a vertical pump for nuclear power plants in areas with seismic risk. The assembly is attached to the building floor using flexible and damping elements. The design allows producing seismically resistant pumps without major design changes in the existing types of vertical pumps. (E.S.). 1 fig

  1. Rack assembly for mounting solar modules

    Science.gov (United States)

    Plaisted, Joshua Reed; West, Brian

    2010-12-28

    A rack assembly is provided for mounting solar modules over an underlying body. The rack assembly may include a plurality of rail structures that are arrangeable over the underlying body to form an overall perimeter for the rack assembly. One or more retention structures may be provided with the plurality of rail structures, where each retention structure is configured to support one or more solar modules at a given height above the underlying body. At least some of the plurality of rail structures are adapted to enable individual rail structures o be sealed over the underlying body so as to constrain air flow underneath the solar modules. Additionally, at least one of (i) one or more of the rail structures, or (ii) the one or more retention structures are adjustable so as to adapt the rack assembly to accommodate solar modules of varying forms or dimensions.

  2. Fuel assembly identification by magnetic scanning

    International Nuclear Information System (INIS)

    Badurek, G.

    1986-09-01

    In order to identify individual fuel assemblies by a magnetic fingerprint, investigations were made on iron inclusions in fuel elements and a method was developed to measure these by magnetically scanning the element. The fuel assembly is drawn with constant speed through a homogeneous magnetic field to magnetize iron inclusions. Resulting inhomogeneous magnetic dipole fields induce a voltage difference in pick up coils which is proportional to the mass of the inclusion. Using lock-in technique 3 mg pieces of steel wire on the surface of the fuel element were detected while the lower limit for the center of an assembly for ferromagnetic spheres was 50 mg. In single rods ferromagnetic samples of 1 mg were detected regardless of geometric form or location. With minor modifications of the measuring procedure the sensitivity limit can be improved to about 10 mg at the center of an assembly. In the KWU-fuel at Zwentendorf no iron inclusions were found

  3. Fuel Assembly Damping Summary

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Kanghee; Kang, Heungseok; Oh, Dongseok; Yoon, Kyungho; Kim, Hyungkyu; Kim, Jaeyong [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2013-10-15

    This paper summary the fuel assembly damping data in air/in still water/under flow, released from foreign fuel vendors, compared our data with the published data. Some technical issues in fuel assembly damping measurement testing are also briefly discussed. Understanding of each fuel assembly damping mechanisms according to the surrounding medium and flow velocity can support the fuel design improvement in fuel assembly dynamics and structural integrity aspect. Because the upgraded requirements of the newly-developed advanced reactor system will demands to minimize fuel design margin in integrity evaluation, reduction in conservatism of fuel assembly damping can contribute to alleviate the fuel design margin for sure. Damping is an energy dissipation mechanism in a vibrating mechanical structure and prevents a resonant structure from having infinite vibration amplitudes. The sources of fuel assembly damping are various from support friction to flow contribution, and it can be increased by the viscosity or drag of surrounding fluid medium or the average velocity of water flowing. Fuel licensing requires fuel design evaluation in transient or accidental condition. Dynamic response analysis of fuel assembly is to show fuel integrity and requires information on assembly-wise damping in dry condition and under wet or water flowing condition. However, damping measurement test for the full-scale fuel assembly prototype is not easy to carry out because of the scale (fuel prototype, test facility), unsteadiness of test data (scattering, random sampling and processing), instrumentation under water flowing (water-proof response measurement), and noise. LWR fuel technology division in KAERI is preparing the infra structure for damping measurement test of full-scale fuel assembly, to support fuel industries and related research activities. Here is a preliminary summary of fuel assembly damping, published in the literature. Some technical issues in fuel assembly damping

  4. Self-assembled nanostructures

    CERN Document Server

    Zhang, Jin Z; Liu, Jun; Chen, Shaowei; Liu, Gang-yu

    2003-01-01

    Nanostructures refer to materials that have relevant dimensions on the nanometer length scales and reside in the mesoscopic regime between isolated atoms and molecules in bulk matter. These materials have unique physical properties that are distinctly different from bulk materials. Self-Assembled Nanostructures provides systematic coverage of basic nanomaterials science including materials assembly and synthesis, characterization, and application. Suitable for both beginners and experts, it balances the chemistry aspects of nanomaterials with physical principles. It also highlights nanomaterial-based architectures including assembled or self-assembled systems. Filled with in-depth discussion of important applications of nano-architectures as well as potential applications ranging from physical to chemical and biological systems, Self-Assembled Nanostructures is the essential reference or text for scientists involved with nanostructures.

  5. Does training of general practitioners for intensive treatment of people with screen-detected diabetes have a spillover effect on mortality and cardiovascular morbidity in 'at risk' individuals with normoglycaemia?

    DEFF Research Database (Denmark)

    Simmons, Rebecca Kate; Bruun, Niels H; Witte, Daniel R

    2017-01-01

    the two treatment groups (HR 1.02 [95% CI 0.92, 1.14]). Conclusions/interpretation: Training of general practitioners to provide target-driven intensive management of blood glucose levels and other cardiovascular risk factors showed some evidence of a spillover effect on the risk of CVD over a 9 year......Aims/hypothesis: Within a trial of intensive treatment of people with screen-detected diabetes, we aimed to assess a potential spillover effect of the trial intervention on incident cardiovascular disease (CVD) and all-cause mortality among people who screened positive on a diabetes risk......-detected diabetes (control group); or (2) screening plus training and support in intensive multifactorial treatment of individuals with screen-detected diabetes (intervention group). We identified all individuals who screened positive on a diabetes risk questionnaire in ADDITION-Denmark but were normoglycaemic...

  6. SAGE: String-overlap Assembly of GEnomes.

    Science.gov (United States)

    Ilie, Lucian; Haider, Bahlul; Molnar, Michael; Solis-Oba, Roberto

    2014-09-15

    De novo genome assembly of next-generation sequencing data is one of the most important current problems in bioinformatics, essential in many biological applications. In spite of significant amount of work in this area, better solutions are still very much needed. We present a new program, SAGE, for de novo genome assembly. As opposed to most assemblers, which are de Bruijn graph based, SAGE uses the string-overlap graph. SAGE builds upon great existing work on string-overlap graph and maximum likelihood assembly, bringing an important number of new ideas, such as the efficient computation of the transitive reduction of the string overlap graph, the use of (generalized) edge multiplicity statistics for more accurate estimation of read copy counts, and the improved use of mate pairs and min-cost flow for supporting edge merging. The assemblies produced by SAGE for several short and medium-size genomes compared favourably with those of existing leading assemblers. SAGE benefits from innovations in almost every aspect of the assembly process: error correction of input reads, string-overlap graph construction, read copy counts estimation, overlap graph analysis and reduction, contig extraction, and scaffolding. We hope that these new ideas will help advance the current state-of-the-art in an essential area of research in genomics.

  7. Supporting Self-Assembly : the IKEA Effect on Mobile Health Persuasive Technology

    OpenAIRE

    Wang, Yunlong; Pfeil, Ulrike; Reiterer, Harald

    2016-01-01

    In this paper, we propose the idea of examining the effect of self-assembly on the success of mobile health persuasive technology. The IKEA effect shows that individuals evaluate products assembled by themselves more positively than pre-assembled products. The IKEA effect has been proven in several domains, e.g., in human robot interaction, where participants who assembled the robot evaluated the robot and the interaction with the robot more favorably than participants who did not assemble th...

  8. Integrating succession and community assembly perspectives.

    Science.gov (United States)

    Chang, Cynthia; HilleRisLambers, Janneke

    2016-01-01

    Succession and community assembly research overlap in many respects, such as through their focus on how ecological processes like dispersal, environmental filters, and biotic interactions influence community structure. Indeed, many recent advances have been made by successional studies that draw on modern analytical techniques introduced by contemporary community assembly studies. However, community assembly studies generally lack a temporal perspective, both on how the forces structuring communities might change over time and on how historical contingency (e.g. priority effects and legacy effects) and complex transitions (e.g. threshold effects) might alter community trajectories. We believe a full understanding of the complex interacting processes that shape community dynamics across large temporal scales can best be achieved by combining concepts, tools, and study systems into an integrated conceptual framework that draws upon both succession and community assembly theory.

  9. Structure of a Venezuelan equine encephalitis virus assembly intermediate isolated from infected cells

    International Nuclear Information System (INIS)

    Lamb, Kristen; Lokesh, G.L.; Sherman, Michael; Watowich, Stanley

    2010-01-01

    Venezuelan equine encephalitis virus (VEEV) is a prototypical enveloped ssRNA virus of the family Togaviridae. To better understand alphavirus assembly, we analyzed newly formed nucleocapsid particles (termed pre-viral nucleocapsids) isolated from infected cells. These particles were intermediates along the virus assembly pathway, and ultimately bind membrane-associated viral glycoproteins to bud as mature infectious virus. Purified pre-viral nucleocapsids were spherical with a unimodal diameter distribution. The structure of one class of pre-viral nucleocapsids was determined with single particle reconstruction of cryo-electron microscopy images. These studies showed that pre-viral nucleocapsids assembled into an icosahedral structure with a capsid stoichiometry similar to the mature nucleocapsid. However, the individual capsomers were organized significantly differently within the pre-viral and mature nucleocapsids. The pre-viral nucleocapsid structure implies that nucleocapsids are highly plastic and undergo glycoprotein and/or lipid-driven rearrangements during virus self-assembly. This mechanism of self-assembly may be general for other enveloped viruses.

  10. General recommendations for decontamination procedures to individuals

    International Nuclear Information System (INIS)

    Ohlenschlaeger, L.; Messerschmidt, J.P.

    1989-04-01

    The fundamental criteria in handling radioactive contaminated persons are discussed and methods of monitoring, including monitoring of contaminated wounds, as well as decontamination measures with reference to particularly exposed regions of the body are described. Each decontamination procedure has to be carried out cautiously and has to be stopped as soon as skin lesion would be ensured from too strong mechanical cleansing, in order to avoid any additional incorporation by an injured skin. As a rule, any residual radioactivity still adherent to the skin surface can be neglected as soon as avoidance of spreading of the contamination to surrounding areas is assured. Experience showed that contaminations with radioactive dust can be removed from the skin surface quite easily by such simple means like water and soap. Radioisotopes, however, as used in nuclear medicine, usually are having a higher adhesive effect to the skin surface, thus making conditions for decontamination more difficult. Measures related to the decontamination procedure such as monitoring, mode of sampling for bioassay in case of incidents, handling of waste resulting from decontamination, as well as self-protective aspects are discussed in the annex. (orig.) [de

  11. TPX assembly plan

    International Nuclear Information System (INIS)

    Knutson, D.

    1993-01-01

    The TPX machine will be assembled in the TFTR Test Cell at the Plasma Physics Laboratory, utilizing the existing TFTR machine foundation. Preparation of the area for assembly will begin after completion of the decontamination and decommissioning phase on TFTR and certification that the radiation levels remaining, if any, are consistent with the types of operations planned. Assembly operations begin with the arrival of the first components, and conclude, approximately 24 months later, with the successful completion of the integrated systems tests and the achievement of a first plasma

  12. Nuclear reactor control assembly

    International Nuclear Information System (INIS)

    Negron, S.B.

    1991-01-01

    This patent describes an assembly for providing global power control in a nuclear reactor having the core split into two halves. It comprises a disk assembly formed from at least two disks each machined with an identical surface hole pattern such that rotation of one disk relative to the other causes the hole pattern to open or close, the disk assembly being positioned substantially at the longitudinal center of and coaxial with the core halves; and means for rotating at least one of the disks relative to the other

  13. Atom-by-atom assembly

    International Nuclear Information System (INIS)

    Hla, Saw Wai

    2014-01-01

    Atomic manipulation using a scanning tunneling microscope (STM) tip enables the construction of quantum structures on an atom-by-atom basis, as well as the investigation of the electronic and dynamical properties of individual atoms on a one-atom-at-a-time basis. An STM is not only an instrument that is used to ‘see’ individual atoms by means of imaging, but is also a tool that is used to ‘touch’ and ‘take’ the atoms, or to ‘hear’ their movements. Therefore, the STM can be considered as the ‘eyes’, ‘hands’ and ‘ears’ of the scientists, connecting our macroscopic world to the exciting atomic world. In this article, various STM atom manipulation schemes and their example applications are described. The future directions of atomic level assembly on surfaces using scanning probe tips are also discussed. (review article)

  14. Gravity Probe B Assembled

    Science.gov (United States)

    2000-01-01

    In this photo, the Gravity Probe B (GP-B) space vehicle is being assembled at the Sunnyvale, California location of the Lockheed Martin Corporation. The GP-B is the relativity experiment developed at Stanford University to test two extraordinary predictions of Albert Einstein's general theory of relativity. The experiment will measure, very precisely, the expected tiny changes in the direction of the spin axes of four gyroscopes contained in an Earth-orbiting satellite at a 400-mile altitude. So free are the gyroscopes from disturbance that they will provide an almost perfect space-time reference system. They will measure how space and time are very slightly warped by the presence of the Earth, and, more profoundly, how the Earth's rotation very slightly drags space-time around with it. These effects, though small for the Earth, have far-reaching implications for the nature of matter and the structure of the Universe. GP-B is among the most thoroughly researched programs ever undertaken by NASA. This is the story of a scientific quest in which physicists and engineers have collaborated closely over many years. Inspired by their quest, they have invented a whole range of technologies that are already enlivening other branches of science and engineering. Launched April 20, 2004 , the GP-B program was managed for NASA by the Marshall Space Flight Center. Development of the GP-B is the responsibility of Stanford University along with major subcontractor Lockheed Martin Corporation. (Image credit to Russ Underwood, Lockheed Martin Corporation).

  15. Conjugated material self-assembly : towards supramolecular electronics

    NARCIS (Netherlands)

    Leclère, P.E.L.G.; Surin, M.; Cavallini, M.; Jonkheijm, P.; Henze, O.; Schenning, A.P.H.J.; Biscarini, F.; Grimsdale, A.C.; Feast, W.J.; Meijer, E.W.; Müllen, K.; Brédas, J.L.; Lazzaroni, R.

    2004-01-01

    Properties of organic electronic materials in solid-state are determined as individual molecules and molecular assembly. It is essential to optimize conjugated materials to control performance of molecular assembly that constitute electronic devices such as light-emitting diodes and solar cells, and

  16. Physical principles for DNA tile self-assembly.

    Science.gov (United States)

    Evans, Constantine G; Winfree, Erik

    2017-06-19

    DNA tiles provide a promising technique for assembling structures with nanoscale resolution through self-assembly by basic interactions rather than top-down assembly of individual structures. Tile systems can be programmed to grow based on logical rules, allowing for a small number of tile types to assemble large, complex assemblies that can retain nanoscale resolution. Such algorithmic systems can even assemble different structures using the same tiles, based on inputs that seed the growth. While programming and theoretical analysis of tile self-assembly often makes use of abstract logical models of growth, experimentally implemented systems are governed by nanoscale physical processes that can lead to very different behavior, more accurately modeled by taking into account the thermodynamics and kinetics of tile attachment and detachment in solution. This review discusses the relationships between more abstract and more physically realistic tile assembly models. A central concern is how consideration of model differences enables the design of tile systems that robustly exhibit the desired abstract behavior in realistic physical models and in experimental implementations. Conversely, we identify situations where self-assembly in abstract models can not be well-approximated by physically realistic models, putting constraints on physical relevance of the abstract models. To facilitate the discussion, we introduce a unified model of tile self-assembly that clarifies the relationships between several well-studied models in the literature. Throughout, we highlight open questions regarding the physical principles for DNA tile self-assembly.

  17. Nuclear fuel assembly

    International Nuclear Information System (INIS)

    Anthony, A.J.

    1980-01-01

    A bimetallic spacer means is cooperatively associated with a nuclear fuel assembly and operative to resist the occurrence of in-reactor bowing of the nuclear fuel assembly. The bimetallic spacer means in one embodiment of the invention includes a space grid formed, at least principally, of zircaloy to the external surface of which are attached a plurality of stainless steel strips. In another embodiment the strips are attached to fuel pins. In each of the embodiments, the stainless steel strips during power production expand outwardly to a greater extent than do the members to which the stainless steel strips are attached, thereby forming stiff springs which abut against like bimetallic spacer means with which the other nuclear fuel assemblies are provided in a given nuclear reactor core to thus prevent the occurrence of in-reactor bowing of the nuclear fuel assemblies. (author)

  18. Fuel assembly spacer

    International Nuclear Information System (INIS)

    Shirakawa, Ken-etsu.

    1988-01-01

    Purpose: To reduce the pressure loss of coolants by fuel assembly spacers. Constitution: Spacers for supporting a fuel assembly are attached by means of a plurality of wires to an outer frame. The outer frame is made of shape memory alloy such that the wires are caused to slacken at normal temperature and the slacking of the wires is eliminated in excess of the transition temperature. Since the wires slacken at the normal temperature, fuel rods can be inserted easily. After the insertion of the fuel rods, when the entire portion or the outer frame is heated by water or gas at a predetermined temperature, the outer frame resumes its previously memorized shape to tighten the wires and, accordingly, the fuel rods can be supported firmly. In this way, since the fuel rods are inserted in the slacken state of the wires and, after the assembling, the outer frame resumes its memorized shape, the assembling work can be conducted efficiently. (Kamimura, M.)

  19. Nuclear reactor spacer assembly

    International Nuclear Information System (INIS)

    Anthony, A.J.; Groves, M.D.

    1979-01-01

    A fuel assembly for a nuclear reactor is disclosed wherein the fuel element receiving and supporting grid is comprised of a first metal, the guide tubes which pass through the grid assembly are comprised of a second metal and the grid is supported on the guide tubes by means of expanded sleeves located intermediate the grid and guide tubes. The fuel assembly is fabricated by inserting the sleeves, of initial outer diameter commensurate with the guide tube outer diameters, through the holes in the grid assembly provided for the guide tubes and thereafter expanding the sleeves radially outwardly along their entire length such that the guide tubes can subsequently be passed through the sleeves. The step of radial expansion, as a result of windows provided in the sleeves having dimensions commensurate with the geometry of the grid, mechanically captures the grid and simultaneously preloads the sleeve against the grid whereby relative motion between the grid and guide tube will be precluded

  20. Nuclear reactor fuel assembly

    International Nuclear Information System (INIS)

    Vikhorev, Yu.V.; Biryukov, G.I.; Kirilyuk, N.A.; Lobanov, V.N.

    1977-01-01

    A fuel assembly is proposed for nuclear reactors allowing remote replacement of control rod bundles or their shifting from one assembly to another, i.e., their multipurpose use. This leads to a significant increase in fuel assembly usability. In the fuel assembly the control rod bundle is placed in guide tube channels to which baffles are attached for fuel element spacing. The remote handling of control rods is provided by a hollow cylinder with openings in its lower bottom through which the control rods pass. All control rods in a bundle are mounted to a cross beam which in turn is mounted in the cylinder and is designed for grasping the whole rod bundle by a remotely controlled telescopic mechanism in bundle replacement or shifting. (Z.M.)

  1. Nuclear reactor fuel assembly

    International Nuclear Information System (INIS)

    Sakurai, Shungo; Ogiya, Shunsuke.

    1990-01-01

    In a fuel assembly, if the entire fuels comprise mixed oxide fuels, reactivity change in cold temperature-power operation is increased to worsen the reactor shutdown margin. The reactor shutdown margin has been improved by increasing the burnable poison concentration thereby reducing the reactivity of the fuel assembly. However, since unburnt poisons are present at the completion of the reactor operation, the reactivity can not be utilized effectively to bring about economical disadvantage. In view of the above, the reactivity change between lower temperature-power operations is reduced by providing a non-boiling range with more than 9.1% of cross sectional area at the inside of a channel at the central portion of the fuel assembly. As a result, the amount of the unburnt burnable poisons is decreased, the economy of fuel assembly is improved and the reactor shutdown margin can be increase. (N.H.)

  2. Blockages in LMFBR fuel assemblies: a review

    International Nuclear Information System (INIS)

    Han, J.T.; Fontana, M.H.

    1977-01-01

    Experimental and analytical investigations performed in the United States, Germany, Great Britain, and Japan on the effects of partial flow blockages in liquid-metal fast breeder reactor fuel assemblies are reviewed and the results presented. Generalized models are developed from experimental data obtained for blockages of various sizes, shapes, and porosity, with and without pins, utilizing water and sodium as the coolant. Generally, the recirculating flow in the wake behind a blockage is a relatively effective heat transfer mechanism. Experiments where sodium boiling was made to occur behind the blockages indicate that boiling is stable for the configurations tested; these results are predicted by analytical models. Blockages at the inlet of fuel assemblies tend to have insignificant effects in the fuel assembly unless flow is reduced grossly and therefore would be detectable. Blockages in the heat generating zone have to be quite large to cause sodium boiling under normal reactor operating conditions

  3. Blockages in LMFBR fuel assemblies: a review

    Energy Technology Data Exchange (ETDEWEB)

    Han, J T; Fontana, M H

    1977-01-01

    Experimental and analytical investigations performed in the United States, Germany, Great Britain, and Japan on the effects of partial flow blockages in liquid-metal fast breeder reactor fuel assemblies are reviewed and the results presented. Generalized models are developed from experimental data obtained for blockages of various sizes, shapes, and porosity, with and without pins, utilizing water and sodium as the coolant. Generally, the recirculating flow in the wake behind a blockage is a relatively effective heat transfer mechanism. Experiments where sodium boiling was made to occur behind the blockages indicate that boiling is stable for the configurations tested; these results are predicted by analytical models. Blockages at the inlet of fuel assemblies tend to have insignificant effects in the fuel assembly unless flow is reduced grossly and therefore would be detectable. Blockages in the heat generating zone have to be quite large to cause sodium boiling under normal reactor operating conditions.

  4. Metrology Techniques for the Assembly of NCSX

    International Nuclear Information System (INIS)

    Priniski, C.; Dodson, T.; Duco, M.; Raftopoulos, S.; Ellis, R.; Brooks, A.

    2009-01-01

    In support of the National Compact Stellerator Experiment (NCSX), stellerator assembly activities continued this past year at the Princeton Plasma Physics Laboratory (PPPL) in partnership with the Oak Ridge National Laboratory (ORNL). The construction program saw the completion of the first two Half Field-Period Assemblies (HPA), each consisting of three modular coils. The full machine includes six such sub-assemblies. A single HPA consists of three of the NCSX modular coils wound and assembled at PPPL. These geometrically-complex three dimensional coils were wound using computer-aided metrology and CAD models to tolerances within +/- 0.5mm. The assembly of these coils required similar accuracy on a larger scale with the added complexity of more individual parts and fewer degrees of freedom for correction. Several new potential positioning issues developed for which measurement and control techniques were developed. To accomplish this, CAD coordinate-based computer metrology equipment and software similar to the solutions employed for winding the modular coils was used. Given the size of the assemblies, the primary tools were both interferometer aided and Absolute Distance Measurement (ADM)-only based laser trackers. In addition, portable Coordinate Measurement Machine (CMM) arms and some novel indirect measurement techniques were employed. This paper will detail both the use of CAD coordinate-based metrology technology and the techniques developed and employed for dimensional control of NSCX subassemblies. The results achieved and possible improvements to techniques will be discussed.

  5. Reusable fuel test assembly for the FFTF

    International Nuclear Information System (INIS)

    Pitner, A.L.; Dittmer, J.O.

    1992-01-01

    A fuel test assembly that provides re-irradiation capability after interim discharge and reconstitution of the test pin bundle has been developed for use in the Fast Flux Test Facility (FFTF). This test vehicle permits irradiation test data to be obtained at multiple exposures on a few select test pins without the substantial expense of fabricating individual test assemblies as would otherwise be required. A variety of test pin types can be loaded in the reusable test assembly. A reusable test vehicle for irradiation testing in the FFTF has long been desired, but a number of obstacles previously prevented the implementation of such an experimental rig. The MFF-8A test assembly employs a 169-pin bundle using HT-9 alloy for duct and cladding material. The standard driver pins in the fuel bundle are sodium-bonded metal fuel (U-10 wt% Zr). Thirty-seven positions in the bundle are replaceable pin positions. Standard MFF-8A driver pins can be loaded in any test pin location to fill the bundle if necessary. Application of the MFF-8A reusable test assembly in the FFTF constitutes a considerable cost-saving measure with regard to irradiation testing. Only a few well-characterized test pins need be fabricated to conduct a test program rather than constructing entire test assemblies

  6. Fuel assembly reconstitution

    International Nuclear Information System (INIS)

    Morgado, Mario M.; Oliveira, Monica G.N.; Ferreira Junior, Decio B.M.; Santos, Barbara O. dos; Santos, Jorge E. dos

    2009-01-01

    Fuel failures have been happened in Nuclear Power Plants worldwide, without lost of integrity and safety, mainly for the public, environment and power plants workers. The most common causes of these events are corrosion (CRUD), fretting and pellet cladding interaction. These failures are identified by increasing the activity of fission products, verified by chemical analyses of reactor coolant. Through these analyses, during the fourth operation cycle of Angra 2 Nuclear Power Plant, was possible to observe fuel failure indication. This indication was confirmed in the end of the cycle during the unloading of reactor core through leakage tests of fuel assembly, using the equipment called 'In Mast Sipping' and 'Box Sipping'. After confirmed, the fuel assembly reconstitution was scheduled, and happened in April, 2007, where was identified the cause and the fuel rod failure, which was substitute by dummy rods (zircaloy). The cause was fretting by 'debris'. The actions to avoid and prevent fuel assemblies failures are important. The goals of this work are to describe the methodology of fuel assembly reconstitution using the FARE (Fuel Assembly Reconstitution Equipment) system, to describe the results of this task in economic and security factors of the company and show how the fuel assembly failures are identified during operation and during the outage. (author)

  7. Polymer Directed Protein Assemblies

    Directory of Open Access Journals (Sweden)

    Patrick van Rijn

    2013-05-01

    Full Text Available Protein aggregation and protein self-assembly is an important occurrence in natural systems, and is in some form or other dictated by biopolymers. Very obvious influences of biopolymers on protein assemblies are, e.g., virus particles. Viruses are a multi-protein assembly of which the morphology is dictated by poly-nucleotides namely RNA or DNA. This “biopolymer” directs the proteins and imposes limitations on the structure like the length or diameter of the particle. Not only do these bionanoparticles use polymer-directed self-assembly, also processes like amyloid formation are in a way a result of directed protein assembly by partial unfolded/misfolded biopolymers namely, polypeptides. The combination of proteins and synthetic polymers, inspired by the natural processes, are therefore regarded as a highly promising area of research. Directed protein assembly is versatile with respect to the possible interactions which brings together the protein and polymer, e.g., electrostatic, v.d. Waals forces or covalent conjugation, and possible combinations are numerous due to the large amounts of different polymers and proteins available. The protein-polymer interacting behavior and overall morphology is envisioned to aid in clarifying protein-protein interactions and are thought to entail some interesting new functions and properties which will ultimately lead to novel bio-hybrid materials.

  8. Terminating DNA Tile Assembly with Nanostructured Caps.

    Science.gov (United States)

    Agrawal, Deepak K; Jiang, Ruoyu; Reinhart, Seth; Mohammed, Abdul M; Jorgenson, Tyler D; Schulman, Rebecca

    2017-10-24

    Precise control over the nucleation, growth, and termination of self-assembly processes is a fundamental tool for controlling product yield and assembly dynamics. Mechanisms for altering these processes programmatically could allow the use of simple components to self-assemble complex final products or to design processes allowing for dynamic assembly or reconfiguration. Here we use DNA tile self-assembly to develop general design principles for building complexes that can bind to a growing biomolecular assembly and terminate its growth by systematically characterizing how different DNA origami nanostructures interact with the growing ends of DNA tile nanotubes. We find that nanostructures that present binding interfaces for all of the binding sites on a growing facet can bind selectively to growing ends and stop growth when these interfaces are presented on either a rigid or floppy scaffold. In contrast, nucleation of nanotubes requires the presentation of binding sites in an arrangement that matches the shape of the structure's facet. As a result, it is possible to build nanostructures that can terminate the growth of existing nanotubes but cannot nucleate a new structure. The resulting design principles for constructing structures that direct nucleation and termination of the growth of one-dimensional nanostructures can also serve as a starting point for programmatically directing two- and three-dimensional crystallization processes using nanostructure design.

  9. Apparatus for integrated fuel assembly inspection system

    International Nuclear Information System (INIS)

    Ahmed, H.J.; Burchill, S.R.

    1988-01-01

    In a fuel assembly inspection apparatus, the combination is described comprising: (a) an elongated fixture mounted in a stationary upright position; (b) upper means mounted to an upper portion of the fixture and lower means mounted adjacent to a lower portion of the fixture, the upper and lower means being disposed outwardly from a side of the fixture for supporting a nuclear fuel assembly therebetween and extending along the side of the fixture; (c) a bottom carriage having a central opening adapted to receive the fuel assembly therethrough when supported between the upper and lower means such that the bottom carriage being connected only to, and extending in cantilever fashion outwardly from, the side of the fixture for generally vertical movement along the side of the fixture and along the fuel assembly extending along the side of the fixture; (d) drive means for selectively moving the bottom carriage; and (e) means disposed on the bottom carriage for measuring the envelop, of the fuel assembly when the bottom carriage is moved to and stationed at selected axial positions along the fuel assembly

  10. Inverse Problem in Self-assembly

    Science.gov (United States)

    Tkachenko, Alexei

    2012-02-01

    By decorating colloids and nanoparticles with DNA, one can introduce highly selective key-lock interactions between them. This leads to a new class of systems and problems in soft condensed matter physics. In particular, this opens a possibility to solve inverse problem in self-assembly: how to build an arbitrary desired structure with the bottom-up approach? I will present a theoretical and computational analysis of the hierarchical strategy in attacking this problem. It involves self-assembly of particular building blocks (``octopus particles''), that in turn would assemble into the target structure. On a conceptual level, our approach combines elements of three different brands of programmable self assembly: DNA nanotechnology, nanoparticle-DNA assemblies and patchy colloids. I will discuss the general design principles, theoretical and practical limitations of this approach, and illustrate them with our simulation results. Our crucial result is that not only it is possible to design a system that has a given nanostructure as a ground state, but one can also program and optimize the kinetic pathway for its self-assembly.

  11. A common platform: guidelines for European Union preparation for the United Nations General Assembly Special Session to be held in New York in June 1997 to review Agenda 21 and related outcomes of the United Nations Conference on Environment and Development held in Rio de Janeiro in June 1992

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-11-12

    The UN General Assembly will hold a Special Session (`UNGASS`) in June 1997, at the highest possible level, to review the implementation of Agenda 21 and the related outcomes of the UN Conference on Environment and Development held in June 1992. This document sets out recommendations for EU aims on the nature of UNGASS and on UN coordination and for EU aims for the political declaration. Environmental priorities of the EU include: the importance of adopting a legal instrument to limit emissions of greenhouse gases, the need for greater attention to renewable energy conservation and self-sustaining energy conservation; the importance of forests; and the need for UNGASS to consider the future role of UNEP and institutional aspects of environment policy more generally.

  12. Self-assembly behaviour of conjugated terthiophene surfactants in water

    NARCIS (Netherlands)

    van Rijn, Patrick; Janeliunas, Dainius; Brizard, Aurelie M.; Stuart, Marc C. A.; Koper, Ger J. M.; Eelkema, Rienk; van Esch, Jan H.

    2011-01-01

    Conjugated self-assembled systems in water are of great interest because of their potential application in biocompatible supramolecular electronics, but so far their supramolecular chemistry remains almost unexplored. Here we present amphiphilic terthiophenes as a general self-assembling platform

  13. Fuel assembly inspection device

    International Nuclear Information System (INIS)

    Yaginuma, Yoshitaka

    1998-01-01

    The present invention provides a device suitable to inspect appearance of fuel assemblies by photographing the appearance of fuel assemblies. Namely, the inspection device of the present invention measures bowing of fuel assembly or each of fuel rods or both of them based on the partially photographed images of fuel assembly. In this case, there is disposed a means which flashily projects images in the form of horizontal line from a direction intersecting obliquely relative to a horizontal cross section of the fuel assembly. A first image processing means separates the projected image pictures including projected images and calculates bowing. A second image processing means replaces the projected image pictures of the projected images based on projected images just before and after the photographing. Then, images for the measurement of bowing and images for inspection can be obtained simultaneously. As a result, the time required for the photographing can be shortened, the time for inspection can be shortened and an effect of preventing deterioration of photographing means by radiation rays can be provided. (I.S.)

  14. Calculation of Permeability inside the Basket including one Fuel Assembly

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Seung Hwan; Bang, Kyung Sik; Lee, Ju an; Choi, Woo Seok [KAERI, Daejeon (Korea, Republic of)

    2016-05-15

    In general, the porous media model and the effective thermal conductivity were used to simply the fuel assembly. The methods of calculating permeability were compared considering the flow inside a basket which includes a nuclear fuel. Detailed fuel assembly was a computational modeling and the flow characteristics were investigated. The flow inside the basket which included a fuel assembly is analyzed by CFD. As the height of the fuel assembly increases, the pressure drop linearly increased. The inertia resistance could be neglected. Three methods to calculate the permeability were compared. The permeability by the friction factor is 50% less than the permeability by wall shear stress and pressure drop.

  15. Individual Education.

    Science.gov (United States)

    Corsini, Raymond

    1981-01-01

    Paper presented at the 66th Convention of the International Association of Pupil Personnel Workers, October 20, 1980, Baltimore, Maryland, describes individual education based on the principles of Alfred Adler. Defines six advantages of individual education, emphasizing student responsibility, mutual respect, and allowing students to progress at…

  16. Blade attachment assembly

    Science.gov (United States)

    Garcia-Crespo, Andres Jose; Delvaux, John McConnell; Miller, Diane Patricia

    2016-05-03

    An assembly and method for affixing a turbomachine rotor blade to a rotor wheel are disclosed. In an embodiment, an adaptor member is provided disposed between the blade and the rotor wheel, the adaptor member including an adaptor attachment slot that is complementary to the blade attachment member, and an adaptor attachment member that is complementary to the rotor wheel attachment slot. A coverplate is provided, having a coverplate attachment member that is complementary to the rotor wheel attachment slot, and a hook for engaging the adaptor member. When assembled, the coverplate member matingly engages with the adaptor member, and retains the blade in the adaptor member, and the assembly in the rotor wheel.

  17. Reactor and fuel assembly

    International Nuclear Information System (INIS)

    Ishii, Yoshihiko; Bessho, Yasunori; Sano, Hiroki; Yokomizo, Osamu; Yamashita, Jun-ichi.

    1990-01-01

    The present invention realizes an effective spectral operation by applying an optimum pressure loss coefficient while taking the characteristics of a lower tie plate into consideration. That is, the pressure loss coefficient of the lower tie plate is optimized by varying the cross sectional area of a fuel assembly flow channel in the lower tie plate or varying the surface roughness of a coolant flow channel in the lower tie plate. Since there is a pressure loss coefficient to optimize the moderator density over a flow rate change region, the effect of spectral shift rods can be improved by setting the optimum pressure loss coefficient of the lower tie plate. According to the present invention, existent fuel assemblies can easily be changed successively to fuel assemblies having spectral shift rods of a great spectral shift effect by using existent reactor facilities as they are. (I.S.)

  18. Power module assembly

    Science.gov (United States)

    Campbell, Jeremy B [Torrance, CA; Newson, Steve [Redondo Beach, CA

    2011-11-15

    A power module assembly of the type suitable for deployment in a vehicular power inverter, wherein the power inverter has a grounded chassis, is provided. The power module assembly comprises a conductive base layer electrically coupled to the chassis, an insulating layer disposed on the conductive base layer, a first conductive node disposed on the insulating layer, a second conductive node disposed on the insulating layer, wherein the first and second conductive nodes are electrically isolated from each other. The power module assembly also comprises a first capacitor having a first electrode electrically connected to the conductive base layer, and a second electrode electrically connected to the first conductive node, and further comprises a second capacitor having a first electrode electrically connected to the conductive base layer, and a second electrode electrically connected to the second conductive node.

  19. Magnetic nanoparticle assemblies

    CERN Document Server

    Trohidou, Kalliopi N

    2014-01-01

    Magnetic nanoparticles with diameters in the range of a few nanometers are today at the cutting edge of modern technology and innovation because of their use in numerous applications ranging from engineering to biomedicine. A great deal of scientific interest has been focused on the functionalization of magnetic nanoparticle assemblies. The understanding of interparticle interactions is necessary to clarify the physics of these assemblies and their use in the development of high-performance magnetic materials. This book reviews prominent research studies on the static and dynamic magnetic properties of nanoparticle assemblies, gathering together experimental and computational techniques in an effort to reveal their optimized magnetic properties for biomedical use and as ultra-high magnetic recording media.

  20. Reactor fuel assembly

    International Nuclear Information System (INIS)

    Anthony, A.J.; Groves, M.D.

    1980-01-01

    A nuclear reactor fuel assembly having a lower end fitting and actuating means interacting therewith for holding the assembly down on the core support stand against the upward flow of coolant. Locking means for interacting with projections on the support stand are carried by the lower end fitting and are actuated by the movement of an actuating rod operated from above the top of the assembly. In one embodiment of the invention the downward movement of the actuating rod forces a latched spring to move outward into locking engagement with a shoulder on the support stand projections. In another embodiment, the actuating rod is rotated to effect the locking between the end fitting and the projection. (author)

  1. Nuclear fuel assembly

    International Nuclear Information System (INIS)

    Hayashi, Hiroshi; Watari, Yoshio; Hizahara, Hiroshi; Masuoka, Ryuzo.

    1970-01-01

    When exchanging nuclear fuel assemblies during the operation of a nuclear reactor, melting of fuel bodies, and severence of tubular claddings is halted at the time of insertion by furnishing a neutron absorbing material such as B 10 , Cd, Gd or the like at the forward end of the fuel assembly to thereby lower the power peak at the forward ends of the fuel elements to within tolerable levels and thus prevent both fuel liquification and excessive expansion. The neutron absorbing material may be attached in the form of a plate to the fuel assembly forward tie plate, or may be inserted as a pellet into the front end of the tubular cladding. (Owens, K.J.)

  2. Liaison based assembly design

    Energy Technology Data Exchange (ETDEWEB)

    Ames, A.; Kholwadwala, D.; Wilson, R.H.

    1996-12-01

    Liaison Based Assembly Design extends the current information infrastructure to support design in terms of kinematic relationships between parts, or liaisons. These liaisons capture information regarding contact, degrees-of-freedom constraints and containment relationships between parts in an assembly. The project involved defining a useful collection of liaison representations, investigating their properties, and providing for maximum use of the data in downstream applications. We tested our ideas by implementing a prototype system involving extensions to Pro/Engineer and the Archimedes assembly planner. With an expanded product model, the design system is more able to capture design intent. When a product update is attempted, increased knowledge availability improves our ability to understand the effect of design changes. Manufacturing and analysis disciplines benefit from having liaison information available, so less time is wasted arguing over incomplete design specifications and our enterprise can be more completely integrated.

  3. Integrated magnetic transformer assembly

    DEFF Research Database (Denmark)

    2014-01-01

    The present invention relates to an integrated magnetics transformer assembly comprising a first magnetically permeable core forming a first substantially closed magnetic flux path and a second magnetically permeable core forming a second substantially closed magnetic flux path. A first input...... inductor winding is wound around a first predetermined segment of the first magnetically permeable core and a second input inductor winding is wound around a first predetermined segment of the second magnetically permeable core. The integrated magnetics transformer assembly further comprises a first output......-winding of the first output inductor winding and the first half-winding of the second output inductor winding are configured to produce aligned, i.e. in the same direction, magnetic fluxes through the first substantially closed magnetic flux path. The integrated magnetics transformer assembly is well- suited for use...

  4. Sub-assembly accident protection instrumentation systems

    International Nuclear Information System (INIS)

    Vaughan, G.J.; Lunt, A.R.W.; Evans, N.J.; Lawrence, L.A.J.

    1982-01-01

    The possibility of an incident in a sub-assembly progressing to the stage at which the whole core may be at hazard has to be guarded against. It is proposed that for CDFR specific instrumentation will be provided to protect against this incident. Three such systems are described, these are: Acoustic Boiling Noise Detection, Burst Pin Detection and Individual Sub-Assembly Thermocouple (ISAT) monitoring. In the ISAT case, multiplexers and microprocessors are employed, using novel techniques to ensure failure-to-safety. The role of these systems and the implementation of them in the reactor design are also considered. It is concluded that sufficient protection can be provided for both core and breeder sub-assemblies

  5. Transfer of fuel assemblies

    International Nuclear Information System (INIS)

    Vuckovich, M.; Burkett, J. P.; Sallustio, J.

    1984-01-01

    Fuel assemblies of a nuclear reactor are transferred during fueling or refueling or the like by a crane. The work-engaging fixture of the crane picks up an assembly, removes it from this slot, transfers it to the deposit site and deposits it in its slot at the deposit site. The control for the crane includes a strain gauge connected to the crane line which raises and lowers the load. The strain gauge senses the load on the crane. The signal from the strain gauge is compared with setpoints; a high-level setpoint, a low-level setpoint and a slack-line setpoint. If the strain gauge signal exceeds the high-level setpoint, the line drive is disabled. This event may occur during raising of a fuel assembly which encounters resistance. The high-level setpoint may be overridden under proper precautions. The line drive is also disabled if the strain gauge signal is less than the low-level setpoint. This event occurs when a fuel assembly being deposited contacts the bottom of its slot or an obstruction in, or at the entry to the slot. To preclude lateral movement and possible damage to a fuel assembly suspended from the crane line, the traverse drive of the crane is disabled once the strain-gauge exceets the lov-level setpoint. The traverse drive can only be enabled after the strain-gauge signal is less than the slack-line set-point. This occurs when the lines has been set in slack-line setting. When the line is tensioned after slack-li ne setting, the traverse drive remains enabled only if the line has been disconnected from the fuel assembly

  6. Generalized Superconductivity. Generalized Levitation

    International Nuclear Information System (INIS)

    Ciobanu, B.; Agop, M.

    2004-01-01

    In the recent papers, the gravitational superconductivity is described. We introduce the concept of generalized superconductivity observing that any nongeodesic motion and, in particular, the motion in an electromagnetic field, can be transformed in a geodesic motion by a suitable choice of the connection. In the present paper, the gravitoelectromagnetic London equations have been obtained from the generalized Helmholtz vortex theorem using the generalized local equivalence principle. In this context, the gravitoelectromagnetic Meissner effect and, implicitly, the gravitoelectromagnetic levitation are given. (authors)

  7. Neutron detector assembly

    International Nuclear Information System (INIS)

    Hanai, Koi; Shirayama, Shinpei.

    1978-01-01

    Purpose: To prevent gamma-ray from leaking externally passing through the inside of a neutron detector assembly. Constitution: In a neutron detector assembly having a protection pipe formed with an enlarged diameter portion which serves also as a spacer, partition plates with predetermined width are disposed at the upper and the lower portions in this expanded portion. A lot of metal particles are filled into spaces formed by the partition plates. In such a structure, the metal particles well-absorb the gamma-rays from above and convert them into heat to provide shielding for the gamma-rays. (Horiuchi, T.)

  8. Assembling RNA Nanoparticles.

    Science.gov (United States)

    Xiao, Shou-Jun

    2017-01-01

    RNA nanoparticles are designed and self-assembled according to noncanonical interactions of naturally conserved RNA motifs and/or canonical Watson-Crick base-pairing interactions, which have potential applications in gene therapy and nanomedicine. These artificially engineered nanoparticles are mainly synthesized from in vitro transcribed RNAs, purified by denaturing and native polyacrylamide gel electrophoresis (PAGE), and characterized with native PAGE, AFM, and TEM technologies. The protocols of in vitro transcription, denaturing and native PAGE, and RNA nanoparticle self-assembly are described in detail.

  9. Assembling an aesthetic.

    Science.gov (United States)

    Candela, Emily

    2012-12-01

    Recent research informing and related to the study of three-dimensional scientific models is assembled here in a way that explores an aesthetic, specifically, of touch. I concentrate on the materiality of models, drawing on insights from the history and philosophy of science, design and metaphysics. This article chronicles the ways in which touch, or material interactions, operate in the world of 3D models, and its role in what models mean and do. I end with a call for greater attention to scientific process, described as assembly of and within science, which is revealed by this focus on touch. Copyright © 2012 Elsevier Ltd. All rights reserved.

  10. Nuclear fuel assembly

    International Nuclear Information System (INIS)

    1975-01-01

    The nuclear fuel assembly described includes a cluster of fuel elements supported at a distance from each other so that their axes are parallel in order to establish secondary channels between them reserved for the coolant. Several ducts for an auxiliary cooling fluid are arranged in the cluster. The wall of each duct is pierced with coolant ejection holes which are placed circumferentially to a pre-determined pattern established according to the position of the duct in the cluster and by the axial distance of the ejection hole along the duct. This assembly is intended for reactors cooled by light or heavy water [fr

  11. A Novel Assembly Line Balancing Method Based on PSO Algorithm

    Directory of Open Access Journals (Sweden)

    Xiaomei Hu

    2014-01-01

    Full Text Available Assembly line is widely used in manufacturing system. Assembly line balancing problem is a crucial question during design and management of assembly lines since it directly affects the productivity of the whole manufacturing system. The model of assembly line balancing problem is put forward and a general optimization method is proposed. The key data on assembly line balancing problem is confirmed, and the precedence relations diagram is described. A double objective optimization model based on takt time and smoothness index is built, and balance optimization scheme based on PSO algorithm is proposed. Through the simulation experiments of examples, the feasibility and validity of the assembly line balancing method based on PSO algorithm is proved.

  12. Fire resistant PV shingle assembly

    Science.gov (United States)

    Lenox, Carl J.

    2012-10-02

    A fire resistant PV shingle assembly includes a PV assembly, including PV body, a fire shield and a connection member connecting the fire shield below the PV body, and a support and inter-engagement assembly. The support and inter-engagement assembly is mounted to the PV assembly and comprises a vertical support element, supporting the PV assembly above a support surface, an upper interlock element, positioned towards the upper PV edge, and a lower interlock element, positioned towards the lower PV edge. The upper interlock element of one PV shingle assembly is inter-engageable with the lower interlock element of an adjacent PV shingle assembly. In some embodiments the PV shingle assembly may comprise a ventilation path below the PV body. The PV body may be slidably mounted to the connection member to facilitate removal of the PV body.

  13. Equations of macrotransport in reactor fuel assemblies

    International Nuclear Information System (INIS)

    Sorokin, A.P.; Zhukov, A.V.; Kornienko, Yu.N.; Ushakov, P.A.

    1986-01-01

    The rigorous statement of equations of macrotransport is obtained. These equations are bases for channel-by-channel methods of thermohydraulic calculations of reactor fuel assemblies within the scope of the model of discontinuous multiphase coolant flow (including chemical reactions); they also describe a wide range of problems on thermo-physical reactor fuel assembly justification. It has been carried out by smoothing equations of mass, momentum and enthalpy transfer in cross section of each phase of the elementary fuel assembly subchannel. The equation for cross section flows is obtaind by smoothing the equation of momentum transfer on the interphase. Interaction of phases on the channel boundary is described using the Stanton number. The conclusion is performed using the generalized equation of substance transfer. The statement of channel-by-channel method without the scope of homogeneous flow model is given

  14. Finishing of the cold mass assembly

    CERN Multimedia

    Maximilien Brice

    2001-01-01

    Photo 1 Zoom of the lyre-side end of the active part assembly. The extremity of the shrinking cylinder has been bevelled in view of welding the end cover. Photo 2 General view of the finishing station showing the special supporting structures (blue and yellow structures) needed for the geometric measurements and for the alignment operations. Photo 3 Zoom of the lyre-side end of the active part assembly. One can also see the auxiliary bus bars needed to power the corrector magnets that are installed in the dipole cold mass assembly. Photo 4 Technicians are putting in order the instrumentation wires. The prototype magnets were equipped with numerous sensors to monitor key parameters during the performance tests at cold conditions.

  15. Finishing of the cold mass assembly

    CERN Multimedia

    Maximilien Brice

    2001-01-01

    Photo 1 The connection-side end of the active part assembly. This view shows the electrical connections between the poles and the curved bus ended with flanges for the connection with the protection diode. Photo 2 The connection-side end of the active part assembly. This view shows the electrical connections between the poles, the auxiliary bus bars and the instrumentation wires. Photo 3 Lyre-side end of the active part assembly. One can see the mechanical support of the corretor magnets that are to be installed around the cold bore tubes. Photo 4 General view of the finishing station showing the special supporting structures (blue and yellow structures) needed for the geometric measurements and for the alignment operations. Around the magnet, there are datum points (on the tripodes) needed to build up the coordinates system for the measurements.

  16. Particulate morphology mathematics applied to particle assemblies

    CERN Document Server

    Gotoh, Keishi

    2012-01-01

    Encompassing over fifty years of research, Professor Gotoh addresses the correlation function of spatial structures and the statistical geometry of random particle assemblies. In this book morphological study is formed into random particle assemblies to which various mathematics are applied such as correlation function, radial distribution function and statistical geometry. This leads to the general comparison between the thermodynamic state such as gases and liquids and the random particle assemblies. Although structures of molecular configurations change at every moment due to thermal vibration, liquids can be regarded as random packing of particles. Similarly, gaseous states correspond to particle dispersion. If physical and chemical properties are taken away from the subject, the remainder is the structure itself. Hence, the structural study is ubiquitous and of fundamental importance. This book will prove useful to chemical engineers working on powder technology as well as mathematicians interested in le...

  17. ATLAS facility fabrication and assembly

    CERN Document Server

    Ballard, E O; Davis, H A; Nielsen, K E; Parker, G V; Parsons, W M

    2001-01-01

    Summary form only given. Atlas is a pulsed-power facility recently completed at Los Alamos National Laboratory to drive hydrodynamic experiments. This new generation pulsed-power machine consists of a radial array of 24, 240-kV Marx modules and transmission lines supplying current to the load region at the machine center. The transmission lines, powered by the Marx modules, consist of cable headers, load protection switches and tri-plates interfacing to the center transition section through detachable current joints. A conical power-flow-channel attaches to the transition section providing an elevated interface to attach the experimental loads for diagnostic access. Fabrication and assembly of all components for the Atlas machine was completed in August 2000. The machine has also progressed through a test phase where the Marx module/transmission line units were fired, individually, into a test load. Progression continued with eight and sixteen lines being fired. Subsequently, an overall machine test was condu...

  18. Sequencing and de novo assembly of 150 genomes from Denmark as a population reference

    DEFF Research Database (Denmark)

    Maretty, Lasse; Jensen, Jacob Malte; Petersen, Bent

    2017-01-01

    or by performing local assembly. However, these approaches are biased against discovery of structural variants and variation in the more complex parts of the genome. Hence, large-scale de novo assembly is needed. Here we show that it is possible to construct excellent de novo assemblies from high......-coverage sequencing with mate-pair libraries extending up to 20 kilobases. We report de novo assemblies of 150 individuals (50 trios) from the GenomeDenmark project. The quality of these assemblies is similar to those obtained using the more expensive long-read technology. We use the assemblies to identify a rich set...

  19. Turbomachine blade assembly

    Science.gov (United States)

    Garcia Crespo, Andres Jose

    2016-11-01

    Embodiments of the present disclosure include a system comprising a turbomachine blade assembly having a blade portion, a shank portion, and a mounting portion, wherein the blade portion, the shank portion, and the mounting portion comprise a first plurality of plies extending from a tip of the airfoil to a base of the dovetail.

  20. Fuel sub-assembly

    International Nuclear Information System (INIS)

    Jolly, R.

    1982-01-01

    A fuel sub-assembly for a liquid metal cooled nuclear reactor is described in which the bundle of fuel pins are braced apart by a series of spaced grids. The grids at the lower end are capable of yielding, thus allowing pins swollen by irradiation to be withdrawn with a reduced risk of damage. (U.K.)

  1. Nanoparticle assemblies and superstructures

    National Research Council Canada - National Science Library

    Kotov, Nicholas A

    2006-01-01

    ... building blocks of larger and more complex systems. Therefore, the present challenge of nanoscale science is to shift from making certain building blocks to organizing them in one-, two-, and three-dimensional structures. Such assemblies and superstructures are the next logical step in the development of nanoscience and nanotechnology. In this re...

  2. Spool assembly support analysis

    International Nuclear Information System (INIS)

    Norman, B.F.

    1994-01-01

    This document provides the wind/seismic analysis and evaluation for the pump pit spool assemblies. Hand calculations were used for the analysis. UBC, AISC, and load factors were used in this evaluation. The results show that the actual loads are under the allowable loads and all requirements are met

  3. Nanotechnology: A molecular assembler

    Science.gov (United States)

    Kelly, T. Ross; Snapper, Marc L.

    2017-09-01

    The idea of nanometre-scale machines that can assemble molecules has long been thought of as the stuff of science fiction. Such a machine has now been built -- and might herald a new model for organic synthesis. See Letter p.374

  4. Macroscopic magnetic Self assembly

    NARCIS (Netherlands)

    Löthman, Per Arvid

    2018-01-01

    Exploring the macroscopic scale's similarities to the microscale is part and parcel of this thesis as reflected in the research question: what can we learn about the microscopic scale by studying the macroscale? Investigations of the environment in which the self-assembly takes place, and the

  5. Assembling Sustainable Territories

    DEFF Research Database (Denmark)

    Vandergeest, Peter; Ponte, Stefano; Bush, Simon

    2015-01-01

    that territorialisation is accomplished not just through (re)defining bounded space, but more broadly through the assembling of four elements: space, subjects, objects, and expertise. Four case studies of sustainability certification in seafood are analyzed to show that ‘green gabbing’ is not necessarily the central...

  6. Assembling sustainable territories

    NARCIS (Netherlands)

    Vandergeest, Peter; Ponte, Stefano; Bush, Simon

    2015-01-01

    The authors show how certification assembles ‘sustainable’ territories through a complex layering of regulatory authority in which both government and nongovernment entities claim rule-making authority, sometimes working together, sometimes in parallel, sometimes competitively. It is argued that

  7. Turneri preemia 2015: Assemble

    Index Scriptorium Estoniae

    2015-01-01

    Turneri 2015. aasta preemia pälvis radikaalne noorte arhitektide kollektiiv Assemble. Rühmitus on 18-liikmeline ja baseerub Ida-Londonis ning selle tegevust võib üldistatult nimetada hüljatud ruumide taaselustamiseks kogukondlike aktsioonide kaudu

  8. Industrial Assembly Cases

    DEFF Research Database (Denmark)

    Ellekilde, Lars-Peter; Buch, Jacob Pørksen; Iversen, Thorbjørn Mosekjær

    This technical report presents 13 different industrial assembly tasks, which are composed of 70 different operations. The report is written to provide an overview and do as such not contain product specific information such as object weights, dimensions etc. The operations are classified into a set...

  9. Biosynthesis: Reprogramming assembly lines

    Science.gov (United States)

    Menon, Binuraj R. K.; Jenner, Matthew

    2018-03-01

    Rational engineering of biosynthetic assembly lines for production of new compounds is an attractive prospect, yet it presents many challenges. Learning from biology, some of the rules for expanding the chemical diversity of non-ribosomal peptides have been uncovered in two recent studies.

  10. Lageos assembly operation plan

    Science.gov (United States)

    Brueger, J.

    1975-01-01

    Guidelines and constraints procedures for LAGEOS assembly, operation, and design performance are given. Special attention was given to thermal, optical, and dynamic analysis and testing. The operation procedures illustrate the interrelation and sequence of tasks in a flow diagram. The diagram also includes quality assurance functions for verification of operation tasks.

  11. Assembly of primary cilia

    DEFF Research Database (Denmark)

    Pedersen, Lotte B; Veland, Iben R; Schrøder, Jacob M

    2008-01-01

    knowledge about IFT is based on studies performed in Chlamydomonas and Caenorhabditis elegans. Therefore, our review of the IFT literature includes studies performed in these two model organisms. The role of several non-IFT proteins (e.g., centrosomal proteins) in the ciliary assembly process is also...... discussed. Developmental Dynamics, 2008. (c) 2008 Wiley-Liss, Inc....

  12. 10 December 2015 - Director-General for Research, Italian Ministry of Education, Research and University V. Di Felice visiting LHC superconducting magnet assembly hall and CERN Control centre with Director for Research and Scientific Computing S. Bertolucci.

    CERN Multimedia

    Gadmer, Jean-Claude Robert

    2015-01-01

    Dr Vincenzo Di Felice Director-General for Research Ministry of Education, Research and University Italian Republic were also present: A. Di Donato, MIUR; M. Gargano, MIUR - INFN Auditor; F. Ciardiello, MIUR - INFN Auditor; A. Mondera, Court of Auditors - INFN Auditor; S. Odorizzi, AD Tassullo S.p.A.; M. Dalpiaz, Tassullo S.p.A.; F. Conforti, Tassullo S.p.A; A. Sartor, Tassullo S.p.A.; D. Bonn, Tassullo S.p.A.; M. Allegri, INFN; F. Ferroni, INFN President; S. Falciano, INFN Vice President; A. Zoccoli, INFN Executive Member; U. Dosselli, Scientific Attaché, Permanent Mission to the UNOG.

  13. The APOLLO assembly spectrum code

    International Nuclear Information System (INIS)

    Kavenoky, A.; Sanchez, R.

    1987-04-01

    The APOLLO code was originally developed as a design tool for HTR's, later it was aimed at the calculation of PWR lattices. APOLLO is a general purpose assembly spectrum code based on the multigroup integral transport equation; refined collision probability modules allow the computation of 1D geometries with linearly anisotropic scattering and two term flux expansion. In 2D geometries modules based on the substructure method provide fast and accurate design calculations and a module based on a direct discretization is devoted to reference calculations. The SPH homogenization technique provides corrected cross sections performing an equivalence between coarse and refined calculations. The post processing module of APOLLO generate either APOLLIB to be used by APOLLO or NEPLIB for reactor diffusion calculation. The cross section library of APOLLO contains data and self-shielding data for more than 400 isotopes. APOLLO is able to compute the depletion of any medium accounting for any heavy isotope or fission product chain. 21 refs

  14. General general game AI

    OpenAIRE

    Togelius, Julian; Yannakakis, Georgios N.; 2016 IEEE Conference on Computational Intelligence and Games (CIG)

    2016-01-01

    Arguably the grand goal of artificial intelligence research is to produce machines with general intelligence: the capacity to solve multiple problems, not just one. Artificial intelligence (AI) has investigated the general intelligence capacity of machines within the domain of games more than any other domain given the ideal properties of games for that purpose: controlled yet interesting and computationally hard problems. This line of research, however, has so far focuse...

  15. Cell-assembly coding in several memory processes.

    Science.gov (United States)

    Sakurai, Y

    1998-01-01

    The present paper discusses why the cell assembly, i.e., an ensemble population of neurons with flexible functional connections, is a tenable view of the basic code for information processes in the brain. The main properties indicating the reality of cell-assembly coding are neurons overlaps among different assemblies and connection dynamics within and among the assemblies. The former can be detected as multiple functions of individual neurons in processing different kinds of information. Individual neurons appear to be involved in multiple information processes. The latter can be detected as changes of functional synaptic connections in processing different kinds of information. Correlations of activity among some of the recorded neurons appear to change in multiple information processes. Recent experiments have compared several different memory processes (tasks) and detected these two main properties, indicating cell-assembly coding of memory in the working brain. The first experiment compared different types of processing of identical stimuli, i.e., working memory and reference memory of auditory stimuli. The second experiment compared identical processes of different types of stimuli, i.e., discriminations of simple auditory, simple visual, and configural auditory-visual stimuli. The third experiment compared identical processes of different types of stimuli with or without temporal processing of stimuli, i.e., discriminations of elemental auditory, configural auditory-visual, and sequential auditory-visual stimuli. Some possible features of the cell-assembly coding, especially "dual coding" by individual neurons and cell assemblies, are discussed for future experimental approaches. Copyright 1998 Academic Press.

  16. Individualizing Medicare.

    Science.gov (United States)

    Chollet, D J

    1999-05-01

    Despite the enactment of significant changes to the Medicare program in 1997, Medicare's Hospital Insurance trust fund is projected to be exhausted just as the baby boom enters retirement. To address Medicare's financial difficulties, a number of reform proposals have been offered, including several to individualize Medicare financing and benefits. These proposals would attempt to increase Medicare revenues and reduce Medicare expenditures by having individuals bear risk--investment market risk before retirement and insurance market risk after retirement. Many fundamental aspects of these proposals have yet to be worked out, including how to guarantee a baseline level of saving for health insurance after retirement, how retirees might finance unanticipated health insurance price increases after retirement, the potential implications for Medicaid of inadequate individual saving, and whether the administrative cost of making the system fair and adequate ultimately would eliminate any rate-of-return advantages from allowing workers to invest their Medicare contributions in corporate stocks and bonds.

  17. [The effects of social networks on health check-up service use among pre-frail older adults (candidate so-called "specified elderly individuals") compared with older people in general].

    Science.gov (United States)

    Sugisawa, Hidehiro; Sugihara, Yoko

    2011-09-01

    Nursing care prevention programs cannot accomplish their goals without effective screening of pre-frail older people. Health check-up services provide a very opportunity for this purpose. In the present study we examined not only the direct and indirect effects of social networks on check-up service use among candidate pre-frail older people, but also whether these effects differ from those among older people in general. Subjects for this study were respondents of a survey for probability sampled aged 65 and over living in a city, Tokyo. Individuals who gave effective responses to items used in our analysis made up 55.8 percent of the sample. 734 candidate pre-frail older people were selected using the screening criteria provided by the ministry of Heath, Labor and Welfare. The general category of older people numbered 2,057, excluding the candidates and elderly certified for long-term care. Social networks were measured from five aspects: family size; contact with children or relatives living separately; contact with neighbors or friends; involvement in community activities; and seeing a doctor. Our model of indirect effects of social networks on check-up use included awareness of nursing care prevention programs as a mediating factor. Information about whether the subjects used the health check-up service was provided.by the regional government. Magnitude of the effects was evaluated from two aspects; using statistical tests and focusing on marginal effects. Although none of the social network indicators had direct significant impacts on check-up use, contact with children or relatives living separately, contact with neighbors or friends, or involvement with community activities demonstrated significant indirect influence. Contact with neighbors or friends, involvement with community activities, or seeing a doctor had direct significant effects on use among the general category of older people, but none of the social network indicators demonstrated significant

  18. School Assemblies: The Lost Art.

    Science.gov (United States)

    Beach, Daniel R.

    1979-01-01

    Guidelines and suggestions are offered for successful school assemblies. The school assembly should be a positive event; an occasion for developing unity, group loyalty, and desirable audience habits. (Author/MLF)

  19. Assembling large, complex environmental metagenomes

    Energy Technology Data Exchange (ETDEWEB)

    Howe, A. C. [Michigan State Univ., East Lansing, MI (United States). Microbiology and Molecular Genetics, Plant Soil and Microbial Sciences; Jansson, J. [USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States); Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Earth Sciences Division; Malfatti, S. A. [USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States); Tringe, S. G. [USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States); Tiedje, J. M. [Michigan State Univ., East Lansing, MI (United States). Microbiology and Molecular Genetics, Plant Soil and Microbial Sciences; Brown, C. T. [Michigan State Univ., East Lansing, MI (United States). Microbiology and Molecular Genetics, Computer Science and Engineering

    2012-12-28

    The large volumes of sequencing data required to sample complex environments deeply pose new challenges to sequence analysis approaches. De novo metagenomic assembly effectively reduces the total amount of data to be analyzed but requires significant computational resources. We apply two pre-assembly filtering approaches, digital normalization and partitioning, to make large metagenome assemblies more computationaly tractable. Using a human gut mock community dataset, we demonstrate that these methods result in assemblies nearly identical to assemblies from unprocessed data. We then assemble two large soil metagenomes from matched Iowa corn and native prairie soils. The predicted functional content and phylogenetic origin of the assembled contigs indicate significant taxonomic differences despite similar function. The assembly strategies presented are generic and can be extended to any metagenome; full source code is freely available under a BSD license.

  20. X-Ray Assembler Data

    Data.gov (United States)

    U.S. Department of Health & Human Services — Federal regulations require that an assembler who installs one or more certified components of a diagnostic x-ray system submit a report of assembly. This database...

  1. An investigation of Hebbian phase sequences as assembly graphs

    Directory of Open Access Journals (Sweden)

    Daniel Gomes Almeida Filho

    2014-04-01

    Full Text Available Hebb proposed that synapses between neurons that fire synchronously are strengthened, forming cell assemblies and phase sequences. The former, on a shorter scale, are ensembles of synchronized cells that function transiently as a closed processing system; the latter, on a larger scale, correspond to the sequential activation of cell assemblies able to represent percepts and behaviors. Nowadays, the recording of large neuronal populations allows for the detection of multiple cell assemblies. Within Hebb’s theory, the next logical step is the analysis of phase sequences. Here we detected phase sequences as consecutive assembly activation patterns, and then analyzed their graph attributes in relation to behavior. We investigated action potentials recorded from the adult rat hippocampus and neocortex before, during and after novel object exploration (experimental periods. Within assembly graphs, each assembly corresponded to a node, and each edge corresponded to the temporal sequence of consecutive node activations. The sum of all assembly activations was proportional to firing rates, but the activity of individual assemblies was not. Assembly repertoire was stable across experimental periods, suggesting that novel experience does not create new assemblies in the adult rat. Assembly graph attributes, on the other hand, varied significantly across behavioral states and experimental periods, and were separable enough to correctly classify experimental periods (Naïve Bayes classifier; maximum AUROCs ranging from 0.55 to 0.99 and behavioral states (waking, slow wave sleep, and rapid eye movement sleep; maximum AUROCs s ranging from 0.64 to 0.98. Our findings agree with Hebb’s view that assemblies correspond to primitive building blocks of representation, nearly unchanged in the adult, while phase sequences are labile across behavioral states and change after novel experience. The results are compatible with a role for phase sequences in behavior

  2. Welding facilities for NPP assembling

    International Nuclear Information System (INIS)

    Rojtenberg, S.S.

    1987-01-01

    Recommendations concerning the choice of equipment for welding in pre-assembling work shops, in the enlarging assembling shops and at the assembling site, are given. Advanced production automatic welders and semiautomatic machines, applied during the NPP equipment assembling as well as automatic machines specially produced for welding the main reactor components and pipelines are described. Automatic and semiautomatic machine and manual welding post supply sources are considered

  3. Reflector-moderated critical assemblies

    International Nuclear Information System (INIS)

    Paxton, H.C.; Jarvis, G.A.; Byers, C.C.

    1975-07-01

    Experiments with reflector-moderated critical assemblies were part of the Rover Program at the Los Alamos Scientific Laboratory (LASL). These assemblies were characterized by thick D 2 O or beryllium reflectors surrounding large cavities that contained highly enriched uranium at low average densities. Because interest in this type of system has been revived by LASL Plasma Cavity Assembly studies, more detailed descriptions of the early assemblies than had been available in the unclassified literature are provided. (U.S.)

  4. Collective individualism

    DEFF Research Database (Denmark)

    Baarts, Charlotte

    2009-01-01

    at a construction site. An ethnographic fieldwork, in which the researcher worked as an apprentice, will provide detailed and experiencenear insights into the complexity of these processes. Findings show that individualist and collectivist preferences influence the amount of risk the individual worker will assume...

  5. Nuclear fuel assembly

    International Nuclear Information System (INIS)

    Takeda, Tadashi; Sato, Kenji; Goto, Masakazu.

    1984-01-01

    Purpose: To facilitate identification of a fuel assembly upon fuel exchange in BWR type reactors. Constitution: Fluorescent material is coated or metal plating is applied to the impressed portion of a upper tie plate handle of a fuel assembly, and the fluorescent material or the metal plating surface is covered with a protective membrane made of transparent material. This enables to distinguish the impressed surface from a distant place and chemical reaction between the impressed surface and the reactor water can be prevented. Furthermore, since the protective membrane is formed such that it protrudes toward the upper side relative to the impressed surface, there is no risk of depositions of claddings thereover. (Moriyama, K.)

  6. Fuel nozzle assembly

    Science.gov (United States)

    Johnson, Thomas Edward [Greer, SC; Ziminsky, Willy Steve [Simpsonville, SC; Lacey, Benjamin Paul [Greer, SC; York, William David [Greer, SC; Stevenson, Christian Xavier [Inman, SC

    2011-08-30

    A fuel nozzle assembly is provided. The assembly includes an outer nozzle body having a first end and a second end and at least one inner nozzle tube having a first end and a second end. One of the nozzle body or nozzle tube includes a fuel plenum and a fuel passage extending therefrom, while the other of the nozzle body or nozzle tube includes a fuel injection hole slidably aligned with the fuel passage to form a fuel flow path therebetween at an interface between the body and the tube. The nozzle body and the nozzle tube are fixed against relative movement at the first ends of the nozzle body and nozzle tube, enabling the fuel flow path to close at the interface due to thermal growth after a flame enters the nozzle tube.

  7. Nuclear fuel assembly

    International Nuclear Information System (INIS)

    Ito, Arata; Wakamatsu, Mitsuo.

    1976-01-01

    Object: To permit the coolant in an FBR type reactor to enter from the entrance nozzle into a nuclear fuel assembly without causing cavitation. Structure: In a nuclear fuel assembly, which comprises a number of thin fuel pines bundled together at a uniform spacing and enclosed within an outer cylinder, with a handling head connected to an upper portion of the outer cylinder and an entrance nozzle connected to a lower portion of the cylinder, the inner surface of the entrance nozzle is provided with a buffer member and an orifice successively in the direction of flow of the coolant. The coolant entering from a low pressure coolant chamber into the entrance nozzle strikes the buffer member and is attenuated, and thereafter flows through an orifice into the outer cylinder. (Horiuchi, T.)

  8. Molten core retention assembly

    International Nuclear Information System (INIS)

    Lampe, R.F.

    1976-01-01

    Molten fuel produced in a core overheating accident is caught by a molten core retention assembly consisting of a horizontal baffle plate having a plurality of openings therein, heat exchange tubes having flow holes near the top thereof mounted in the openings, and a cylindrical imperforate baffle attached to the plate and surrounding the tubes. The baffle assembly is supported from the core support plate of the reactor by a plurality of hanger rods which are welded to radial beams passing under the baffle plate and intermittently welded thereto. Preferably the upper end of the cylindrical baffle terminates in an outwardly facing lip to which are welded a plurality of bearings having slots therein adapted to accept the hanger rods

  9. Nuclear fuel assemblies

    International Nuclear Information System (INIS)

    Butterfield, R.S.; Garner, D.L.M.

    1977-01-01

    Reference is made to nuclear fuel assemblies designed for cooling on the 'tube-in-shell' principle in which the fuel is contained by a shell and is cooled by coolant passed through tubes extending through the shell. It has been proposed to employ coated particle fuel as a porous bed on the tube side and the bleed coolant from the tubes into direct contact with the fuel particles. In this way heat is extracted both by direct contact with the fuel and by heat transfer through the coolant tube walls. The system described aims to provide an improved structure of tube and shell for a fuel assembly of this kind and is particularly suitable for use in a gas cooled fast reactor, being able to withstand the neutron flux and high temperature conditions in these reactors. Constructional details are given. (U.K.)

  10. Nuclear reactor fuel assembly

    International Nuclear Information System (INIS)

    1975-01-01

    A description is given of a nuclear reactor fuel assembly comprising a cluster of fuel elements supported by transversal grids so that their axes are parallel to and at a distance from each other, in order to establish interstices for the axial flow of a coolant. At least one of the interstices is occupied by an axial duct reserved for an auxiliary cooling fluid and is fitted with side holes through which the auxiliary cooling fluid is sprayed into the cluster. Deflectors extend as from a transversal grid in a position opposite the holes to deflect the cooling fluid jet towards those parts of the fuel elements that are not accessible to the auxiliary coolant. This assembly is intended for reactors cooled by light or heavy water [fr

  11. Gamma counter shutter assembly

    International Nuclear Information System (INIS)

    Aday, R.W. Jr.; Barber, D.G.

    1976-01-01

    A shutter assembly for a radioactivity measuring apparatus is described having a sample counting chamber, the assembly having a bulky solid lead cylinder with a sample access port extending therethrough for alignment with the sample chamber. The cylinder is rotated by a Geneva wheel arrangement having a drive wheel with a plurality of equi-angularly disposed pins perpendicular to the surface thereof engaging radially extending open-ended slots in a driven wheel secured to the lead cylinder for concurrent rotation therewith. The drive wheel is rotated at a constant speed with the driven wheel accelerating as a pin traverses the slot from the open end toward the driven wheel center and then decelerating as the pin traverses the reverse direction to provide precise positioning with adjacent pins engaging the open ends of adjacent slots in the stop position of the cylinder. 8 Claims, 3 Drawing Figures

  12. Nuclear fuel assemblies

    International Nuclear Information System (INIS)

    Natori, Hisahide; Kurihara, Kunitoshi.

    1982-01-01

    Purpose: To increase the fuel safety by decreasing the gap conductance between fuels and cladding tubes, as well as improve the reactor core controllability by rendering the void coefficient negative. Constitution: Fuel assemblies in a pressure tube comprise a tie-rod, fuel rods in a central region, and fuel rods with burnable poison in the outer circumference region. Here, B 4 C is used as the burnable poison by 1.17 % by weight ratio. The degrees of enrichment for the fissile plutonium as PuO 2 -UO 2 fuel used in the assemblies are 2.7 %, 2.7 % and 1.5 % respectively in the innermost layer, the intermediate layer and the outermost layer. This increases the burn-up degree to improve the plant utilizability, whereby the void coefficient is rendered negative to improve the reactor core controllability. (Horiuchi, T.)

  13. Nuclear fuel assembly

    International Nuclear Information System (INIS)

    Ueda, Tomihiro.

    1970-01-01

    The present invention relates to fuel assemblies employing wire wrap spacers for retaining uniform spatial distribution between fuel elements. Clad fuel elements are helically wound in the oxial direction with a wave-formed wire strand. The strand is therefore provided with spring action which permits the fuel elements to expand freely in the axial and radial directions so as to retain proper spacing and reduce stresses due to thermal deformation. (Ownes, K.J.)

  14. Assembling Toyota in Portugal

    OpenAIRE

    Machado, Tiago; Moniz, António

    2003-01-01

    A lot has been written over the last decade with regard to Toyota and the productive model associated to it (toyota-ism). And more specifically concerning the "(…) best-seller that changed the... sociological world" (Castillo, 1998: 31). But the case of Salvador Caetano’s Ovar Industrial Division (OID), that assembles Toyota light commercial vehicles in Portugal, allows us to put forward a sub-hypothesis that fits into the analysis schema proposed in the First GERPISA International Program – ...

  15. Fuel assembly manufacturing device

    International Nuclear Information System (INIS)

    Picard, P.; Villaeys, R.

    1995-01-01

    The device comprises a central support on which the frame is mounted, a magazine which supports the fuel rods in passages aligned with those in the frame and a traction assembly on the opposite side of the magazine and including an array of pull rods designed to be advanced through the passages in the frame, to grip respective fuel rods in magazine and to pull those rods into the passages on the return stroke. 13 figs

  16. Composite airfoil assembly

    Science.gov (United States)

    Garcia-Crespo, Andres Jose

    2015-03-03

    A composite blade assembly for mounting on a turbine wheel includes a ceramic airfoil and an airfoil platform. The ceramic airfoil is formed with an airfoil portion, a blade shank portion and a blade dovetail tang. The metal platform includes a platform shank and a radially inner platform dovetail. The ceramic airfoil is captured within the metal platform, such that in use, the ceramic airfoil is held within the turbine wheel independent of the metal platform.

  17. Metrology for ITER Assembly

    International Nuclear Information System (INIS)

    Bogusch, E.

    2006-01-01

    The overall dimensions of the ITER Tokamak and the particular assembly sequence preclude the use of conventional optical metrology, mechanical jigs and traditional dimensional control equipment, as used for the assembly of smaller, previous generation, fusion devices. This paper describes the state of the art of the capabilities of available metrology systems, with reference to the previous experience in Fusion engineering and in other industries. Two complementary procedures of transferring datum from the primary datum network on the bioshield to the secondary datum s inside the VV with the desired accuracy of about 0.1 mm is described, one method using the access directly through the ports and the other using transfer techniques, developed during the co-operation with ITER/EFDA. Another important task described is the development of a method for the rapid and easy measurement of the gaps between sectors, required for the production of the customised splice plates between them. The scope of the paper includes the evaluation of the composition and cost of the systems and team of technical staff required to meet the requirements of the assembly procedure. The results from a practical, full-scale demonstration of the methodologies used, using the proposed equipment, is described. This work has demonstrated the feasibility of achieving the necessary accuracies for the successful building of ITER. (author)

  18. SCT Barrel Assembly Complete

    CERN Multimedia

    L. Batchelor

    As reported in the April 2005 issue of the ATLAS eNews, the first of the four Semiconductor Tracker (SCT) barrels, complete with modules and services, arrived safely at CERN in January of 2005. In the months since January, the other three completed barrels arrived as well, and integration of the four barrels into the entire barrel assembly commenced at CERN, in the SR1 building on the ATLAS experimental site, in July. Assembly was completed on schedule in September, with the addition of the innermost layer to the 4-barrel assembly. Work is now underway to seal the barrel thermal enclosure. This is necessary in order to enclose the silicon tracker in a nitrogen atmosphere and provide it with faraday-cage protection, and is a delicate and complicated task: 352 silicon module powertapes, 352 readout-fibre bundles, and over 400 Detector Control System sensors must be carefully sealed into the thermal enclosure bulkhead. The team is currently verifying the integrity of the low mass cooling system, which must be d...

  19. Annual General Asssembly

    CERN Document Server

    Pension Fund

    2005-01-01

    All members and beneficiaries of the Pension Fund are invited to attend the Annual General Asssembly to be held in the CERN Council Chamber on Thursday 13 October 2005 at 14:30 The Agenda comprises: Opening Remarks (J. Bezemer) Results and presentation of the Annual Report 2004 - Role of asset classes in pension funds (C. Cuénoud). Copies of the 2004 Report are available from departmental secretariats. Package of measures aiming at equilibrating the Fund - Proposals by the Governing Board (J.-P. Matheys). Questions from members and beneficiaries. Persons wishing to ask questions are encouraged to submit them, where possible, in writing in advance, addressed to Mr C. Cuénoud, Administrator of the Fund. Conclusions (J. Bezemer). As usual, participants are invited to drinks after the assembly. NB The minutes of the 2004 General Assembly are available from the Administration of the Fund (tel.(+4122)767 27 42; e-mail Sophia.Revol@cern.ch)

  20. Annual General Asssembly

    CERN Multimedia

    2005-01-01

    All members and beneficiaries of the Pension Fund are invited to attend the Annual General Asssembly to be held in the CERN Council Chamber on Thursday 13 October 2005 at 14:30 The Agenda comprises: Opening Remarks (J. Bezemer) Results and presentation of the Annual Report 2004 - Role of asset classes in pension funds (C. Cuénoud) Copies of the 2004 Report are available from departmental secretariats. Package of measures aiming at equilibrating the Fund - Proposals by the Governing Board (J.-P. Matheys) Questions from members and beneficiaries Persons wishing to ask questions are encouraged to submit them, where possible, in writing in advance, addressed to Mr C. Cuénoud, Administrator of the Fund. Conclusions (J. Bezemer) As usual, participants are invited to drinks after the assembly. NB The minutes of the 2004 General Assembly are available from the Administration of the Fund (tel.(+4122)767 27 42; e-mail Sophia.Revol@cern.ch)

  1. Individual monitoring

    International Nuclear Information System (INIS)

    2004-01-01

    This Practical Radiation Technical Manual is one of a series which has been designed to provide guidance on radiological protection for employers, Radiation Protection Officers, managers and other technically competent persons who have a responsibility to ensure the safety of employees working with ionizing radiation. The Manual may be used together with the appropriate IAEA Practical Radiation Safety Manual to provide adequate training, instruction or information on individual monitoring for all employees engaged in work with ionizing radiations. Sources of ionizing radiation have a large number of applications in the workplace. The exposures of the individual workers involved may need to be routinely monitored and records kept of their cumulative radiation doses. There are also occasions when it is necessary to retrospectively determine a dose which may have been received by a worker. This Manual explains the basic terminology associated with individual monitoring and describes the principal types of dosimeters and other related techniques and their application in the workplace. The Manual will be of most benefit if it forms part of more comprehensive training or is supplemented by the advice of a qualified expert in radiation protection. Most of the dosimeters and techniques described in this Manual can only be provided by qualified experts

  2. Fuel assembly insertion system

    International Nuclear Information System (INIS)

    Barkhurst, D.J.

    1987-01-01

    This patent describes a nuclear reactor facility having fuel bundles: a system for the insertion of a fuel bundle into a position where vertically arranged fuel bundles surround and are adjacent the system comprising, in combination, separate and individual centering devices secured to and disposed on top of each fuel bundle adjacent the position. Each such centering device has a generally box-like cap configuration on the upper end of each fuel bundle and includes: a top wall; first and second side walls, each secured along and upper edge to the top wall; a rear plate attached along opposite vertical edges to the first and second side walls; a front inclined wall joined along an upper edge to the top to the wall and attached along opposite vertical edges first and second side walls; pad means secured to the lower edge of the first and second side walls, the front inclined wall and the rear plate for mounting each centering device on top of an associated fuel bundle; pin means carried by at least two of the pad means engageable with an associated aperature for locating and laterally fixing each centering device on top of its respective fuel bundle. Each front inclined wall of each of the centering devices is orientated on top of its respective fuel bundle to slope upwardly and away from the position where upon downward insertion of a fuel bundle any contact between the lower end of the fuel bundle inserted with a front inclined wall of a centering device will laterally deflect the fuel bundle. Each centering device further includes a central socket means secured to the top wall, and an elongated handling pole pivotally attached to the socket

  3. De novo assembly of a haplotype-resolved human genome.

    Science.gov (United States)

    Cao, Hongzhi; Wu, Honglong; Luo, Ruibang; Huang, Shujia; Sun, Yuhui; Tong, Xin; Xie, Yinlong; Liu, Binghang; Yang, Hailong; Zheng, Hancheng; Li, Jian; Li, Bo; Wang, Yu; Yang, Fang; Sun, Peng; Liu, Siyang; Gao, Peng; Huang, Haodong; Sun, Jing; Chen, Dan; He, Guangzhu; Huang, Weihua; Huang, Zheng; Li, Yue; Tellier, Laurent C A M; Liu, Xiao; Feng, Qiang; Xu, Xun; Zhang, Xiuqing; Bolund, Lars; Krogh, Anders; Kristiansen, Karsten; Drmanac, Radoje; Drmanac, Snezana; Nielsen, Rasmus; Li, Songgang; Wang, Jian; Yang, Huanming; Li, Yingrui; Wong, Gane Ka-Shu; Wang, Jun

    2015-06-01

    The human genome is diploid, and knowledge of the variants on each chromosome is important for the interpretation of genomic information. Here we report the assembly of a haplotype-resolved diploid genome without using a reference genome. Our pipeline relies on fosmid pooling together with whole-genome shotgun strategies, based solely on next-generation sequencing and hierarchical assembly methods. We applied our sequencing method to the genome of an Asian individual and generated a 5.15-Gb assembled genome with a haplotype N50 of 484 kb. Our analysis identified previously undetected indels and 7.49 Mb of novel coding sequences that could not be aligned to the human reference genome, which include at least six predicted genes. This haplotype-resolved genome represents the most complete de novo human genome assembly to date. Application of our approach to identify individual haplotype differences should aid in translating genotypes to phenotypes for the development of personalized medicine.

  4. Quantitative self-assembly prediction yields targeted nanomedicines

    Science.gov (United States)

    Shamay, Yosi; Shah, Janki; Işık, Mehtap; Mizrachi, Aviram; Leibold, Josef; Tschaharganeh, Darjus F.; Roxbury, Daniel; Budhathoki-Uprety, Januka; Nawaly, Karla; Sugarman, James L.; Baut, Emily; Neiman, Michelle R.; Dacek, Megan; Ganesh, Kripa S.; Johnson, Darren C.; Sridharan, Ramya; Chu, Karen L.; Rajasekhar, Vinagolu K.; Lowe, Scott W.; Chodera, John D.; Heller, Daniel A.

    2018-02-01

    Development of targeted nanoparticle drug carriers often requires complex synthetic schemes involving both supramolecular self-assembly and chemical modification. These processes are generally difficult to predict, execute, and control. We describe herein a targeted drug delivery system that is accurately and quantitatively predicted to self-assemble into nanoparticles based on the molecular structures of precursor molecules, which are the drugs themselves. The drugs assemble with the aid of sulfated indocyanines into particles with ultrahigh drug loadings of up to 90%. We devised quantitative structure-nanoparticle assembly prediction (QSNAP) models to identify and validate electrotopological molecular descriptors as highly predictive indicators of nano-assembly and nanoparticle size. The resulting nanoparticles selectively targeted kinase inhibitors to caveolin-1-expressing human colon cancer and autochthonous liver cancer models to yield striking therapeutic effects while avoiding pERK inhibition in healthy skin. This finding enables the computational design of nanomedicines based on quantitative models for drug payload selection.

  5. FAMREC, PWR Lateral Mechanical Fuel Rod Assembly Response

    International Nuclear Information System (INIS)

    Guenzler, R.C.

    1995-01-01

    1 - Description of program or function: The Fuel Assembly Mechanical Response Code (FAMREC) calculates the lateral mechanical response of a row of fuel assemblies while allowing for two types of nonlinearities. The first type is a geometric nonlinearity in the form of gaps between individual assemblies and between peripheral assemblies and a boundary wall. Impacting is monitored across the gaps. The second nonlinearity is the permanent deformation of the fuel assembly spacer grid to compressive loading. 2 - Method of solution: The response is calculated in the modal plane. The coupled differential equations are solved in closed form using Laplace transformations. The discrete displacements and velocities are then calculated and the gaps in the system monitored at each axial elevation for impacting. These impact forces are then applied statistically at a given time-step, and equilibrium is found using a Gaussian elimination technique. Three impact force calculation methods are available: 1- a linear impact force and crushing load audit calculation, 2- a more detailed linear impact force and crushing load calculation, and 3- a non-linear grid calculation which allows for plastic deformation of the fuel assembly spacer grids. 3 - Restrictions on the complexity of the problem: Maxima of: 3601 time-steps and forces; 80 modes; 30 applied forces; 15 fuel assemblies; and 5 impact grids per assembly

  6. Mechanics of a crushable pebble assembly using discrete element method

    International Nuclear Information System (INIS)

    Annabattula, R.K.; Gan, Y.; Zhao, S.; Kamlah, M.

    2012-01-01

    The influence of crushing of individual pebbles on the overall strength of a pebble assembly is investigated using discrete element method. An assembly comprising of 5000 spherical pebbles is assigned with random critical failure energies with a Weibull distribution in accordance with the experimental observation. Then, the pebble assembly is subjected to uni-axial compression (ε 33 =1.5%) with periodic boundary conditions. The crushable pebble assembly shows a significant difference in stress–strain response in comparison to a non-crushable pebble assembly. The analysis shows that a ideal plasticity like behaviour (constant stress with increase in strain) is the characteristic of a crushable pebble assembly with sudden damage. The damage accumulation law plays a critical role in determining the critical stress while the critical number of completely failed pebbles at the onset of critical stress is independent of such a damage law. Furthermore, a loosely packed pebble assembly shows a higher crush resistance while the critical stress is insensitive to the packing factor (η) of the assembly.

  7. Liner mounting assembly

    Science.gov (United States)

    Halila, Ely E. (Inventor)

    1994-01-01

    A mounting assembly includes an annular supporting flange disposed coaxially about a centerline axis which has a plurality of circumferentially spaced apart supporting holes therethrough. An annular liner is disposed coaxially with the supporting flange and includes a plurality of circumferentially spaced apart mounting holes aligned with respective ones of the supporting holes. Each of a plurality of mounting pins includes a proximal end fixedly joined to the supporting flange through a respective one of the supporting holes, and a distal end disposed through a respective one of the liner mounting holes for supporting the liner to the supporting flange while unrestrained differential thermal movement of the liner relative to the supporting flange.

  8. Modelling Polar Self Assembly

    Science.gov (United States)

    Olvera de La Cruz, Monica; Sayar, Mehmet; Solis, Francisco J.; Stupp, Samuel I.

    2001-03-01

    Recent experimental studies in our group have shown that self assembled thin films of noncentrosymmetric supramolecular objects composed of triblock rodcoil molecules exhibit finite polar order. These aggregates have both long range dipolar and short range Ising-like interactions. We study the ground state of a simple model with these competing interactions. We find that the competition between Ising-like and dipolar forces yield a periodic domain structure, which can be controlled by adjusting the force constants and film thickness. When the surface forces are included in the potential, the system exhibits a finite macroscopic polar order.

  9. Nuclear reactor core assembly

    International Nuclear Information System (INIS)

    Baxi, C.B.

    1978-01-01

    The object of the present invention is to provide a fast reactor core assembly design for use with a fluid coolant such as liquid sodium or carbon monoxide incorporating a method of increasing the percentage of coolant flow though the blanket elements relative to the total coolant flow through the blanket and fuel elements during shutdown conditions without using moving parts. It is claimed that deterioration due to reactor radiation or temperature conditions is avoided and ready modification or replacement is possible. (U.K.)

  10. Routing of individual polymers in designed patterns

    DEFF Research Database (Denmark)

    Knudsen, Jakob Bach; Liu, Lei; Kodal, Anne Louise Bank

    2015-01-01

    Synthetic polymers are ubiquitous in the modern world, but our ability to exert control over the molecular conformation of individual polymers is very limited. In particular, although the programmable self-assembly of oligonucleotides and proteins into artificial nanostructures has been...... demonstrated, we currently lack the tools to handle other types of synthetic polymers individually and thus the ability to utilize and study their single-molecule properties. Here we show that synthetic polymer wires containing short oligonucleotides that extend from each repeat can be made to assemble...... into arbitrary routings. The wires, which can be more than 200 nm in length, are soft and bendable, and the DNA strands allow individual polymers to self-assemble into predesigned routings on both two- and three-dimensional DNA origami templates. The polymers are conjugated and potentially conducting, and could...

  11. Routing of individual polymers in designed patterns

    Science.gov (United States)

    Knudsen, Jakob Bach; Liu, Lei; Bank Kodal, Anne Louise; Madsen, Mikael; Li, Qiang; Song, Jie; Woehrstein, Johannes B.; Wickham, Shelley F. J.; Strauss, Maximilian T.; Schueder, Florian; Vinther, Jesper; Krissanaprasit, Abhichart; Gudnason, Daniel; Smith, Anton Allen Abbotsford; Ogaki, Ryosuke; Zelikin, Alexander N.; Besenbacher, Flemming; Birkedal, Victoria; Yin, Peng; Shih, William M.; Jungmann, Ralf; Dong, Mingdong; Gothelf, Kurt V.

    2015-10-01

    Synthetic polymers are ubiquitous in the modern world, but our ability to exert control over the molecular conformation of individual polymers is very limited. In particular, although the programmable self-assembly of oligonucleotides and proteins into artificial nanostructures has been demonstrated, we currently lack the tools to handle other types of synthetic polymers individually and thus the ability to utilize and study their single-molecule properties. Here we show that synthetic polymer wires containing short oligonucleotides that extend from each repeat can be made to assemble into arbitrary routings. The wires, which can be more than 200 nm in length, are soft and bendable, and the DNA strands allow individual polymers to self-assemble into predesigned routings on both two- and three-dimensional DNA origami templates. The polymers are conjugated and potentially conducting, and could therefore be used to create molecular-scale electronic or optical wires in arbitrary geometries.

  12. Equilibrium polymerization models of re-entrant self-assembly

    Science.gov (United States)

    Dudowicz, Jacek; Douglas, Jack F.; Freed, Karl F.

    2009-04-01

    As is well known, liquid-liquid phase separation can occur either upon heating or cooling, corresponding to lower and upper critical solution phase boundaries, respectively. Likewise, self-assembly transitions from a monomeric state to an organized polymeric state can proceed either upon increasing or decreasing temperature, and the concentration dependent ordering temperature is correspondingly called the "floor" or "ceiling" temperature. Motivated by the fact that some phase separating systems exhibit closed loop phase boundaries with two critical points, the present paper analyzes self-assembly analogs of re-entrant phase separation, i.e., re-entrant self-assembly. In particular, re-entrant self-assembly transitions are demonstrated to arise in thermally activated equilibrium self-assembling systems, when thermal activation is more favorable than chain propagation, and in equilibrium self-assembly near an adsorbing boundary where strong competition exists between adsorption and self-assembly. Apparently, the competition between interactions or equilibria generally underlies re-entrant behavior in both liquid-liquid phase separation and self-assembly transitions.

  13. Progress of EMBarrel assembly

    CERN Multimedia

    Chalifour, M

    2002-01-01

    The assembly of the sixteen "M" modules into a vertical axis cylinder has been achieved last Friday, completing the first wheel of the Electromagnetic Barrel Calorimeter (see picture). With this, an important milestone in the construction of the ATLAS detector has been reached. Future steps are the rotation of the cylinder axis into horizontal position, in order to integrate the presamplers and heat exchangers by the end of October. The transportation of the wheel and its insertion into the cryostat is the next major milestone, and is planned for the beginning of 2003. The construction of the modules (the so-called "P" modules) of the second wheel is ongoing at Saclay, Annecy and CERN, and will be completed in the coming months. The assembly of the second wheel should start at CERN in February, and its insertion in the cryostat is scheduled for June 2003. This achievement is the result of a successful collaboration of all institutes involved in the construction of the EM Barrel, namely Annecy, Saclay and CE...

  14. Fuel assembly supporting structure

    International Nuclear Information System (INIS)

    Aisch, F.W.; Fuchs, H.P.; Knoedler, D.; Steinke, A.; Steven, J.

    1976-01-01

    For use in forming the core of a pressurized-water reactor, a fuel assembly supporting structure for holding a bundle of interspaced fuel rods, is formed by interspaced end pieces having holes in which the end portions of control rod guide tubes are inserted, fuel rod spacer grids being positioned by these guide tubes between the end pieces. The end pieces are fastened to the end portions of the guide tubes, to integrate the supporting structure, and in the case of at least one of the end pieces, this is done by means which releases that end piece from the guide tubes when the end pieces receive an abnormal thrust force directed towards each other and which would otherwise place the guide tubes under a compressive stress that would cause them to buckle. The spacer grids normally hold the fuel rods interspaced by distances determined by nuclear physics, and buckling of the control rod guide tubes can distort the fuel rod spacer grids with consequent dearrangement of the fuel rod interspacing. A sudden loss of pressure in a pressurized-water reactor pressure vessel can result in the pressurized coolant in the vessel discharging from the vessel at such high velocity as to result in the abnormal thrust force on the end pieces of each fuel assembly, which could cause buckling of the control rod guide tubes when the end pieces are fixed to them in the normal rigid and unyielding manner

  15. Bottom head assembly

    International Nuclear Information System (INIS)

    Fife, A.B.

    1998-01-01

    A bottom head dome assembly is described which includes, in one embodiment, a bottom head dome and a liner configured to be positioned proximate the bottom head dome. The bottom head dome has a plurality of openings extending there through. The liner also has a plurality of openings extending there through, and each liner opening aligns with a respective bottom head dome opening. A seal is formed, such as by welding, between the liner and the bottom head dome to resist entry of water between the liner and the bottom head dome at the edge of the liner. In the one embodiment, a plurality of stub tubes are secured to the liner. Each stub tube has a bore extending there through, and each stub tube bore is coaxially aligned with a respective liner opening. A seat portion is formed by each liner opening for receiving a portion of the respective stub tube. The assembly also includes a plurality of support shims positioned between the bottom head dome and the liner for supporting the liner. In one embodiment, each support shim includes a support stub having a bore there through, and each support stub bore aligns with a respective bottom head dome opening. 2 figs

  16. ULTRASONIC ASSEMBLY [REVIEW

    Directory of Open Access Journals (Sweden)

    PORAV Viorica

    2015-05-01

    Full Text Available The paper exposes the possibility of machine producesers to optimize the costs of clothes assembling. Ultrasonic systems being frequently utilized have many advantages on semi products of synthetic textile and technical textile. First of all, sewing – cutting process can be accomplished under high speeds and rate of losses can be minimized. Cutting seal applications are frequently used for underwear and sportswear. Slicing and unit cutting machines, as well as portable sealing machines are available for labeling sector. Products such as bag, pocket and cover can be sewed in a seamless manner for promotion purposes. All objects in terms of accessories are obtained in same standard. Our quilting machines are preferred in worldwide due to its threadless, high quality sealing. An alternative to the classic sewing assembly, with thread and needles is ultrasonic seaming. In ultrasonic welding, there are no connective bolts, nails, soldering materials, or adhesives necessary to bind the materials together. Ultrasonic is defined as acoustic frequencies above the range audible to the human ear. Ultrasonic frequencies are administered to the fabric from the sonotrode of bonding machine. The high frequency and powerful energy produced, when is release in one special environment, the ultrasound heating this environment. The ability to ultrasonic weld textiles and films depend on their thermoplastic contents and the desired end results. The paper defines the weld ability of more common textiles and films. The welding refers to all types of bonding and sealing, as in point bonding of fabric, or continuous sealing of film.

  17. PWR fuel assembly

    International Nuclear Information System (INIS)

    Yamada, Yuji.

    1995-01-01

    A lower end plug is secured to a lower end of a thimble tube. A bolt-like thimble screw is screw-coupled and fastened to a female screw disposed to the end plug by way of a bushing screw-coupled to a lower nozzle. Then, the thimble screw and the lower nozzle are welded to secure the thimble tube and the lower nozzle. The lower portion of the bushing extends near the lower surface of the lower nozzle. The extended portion is provided with a recess to which a bolt head of the thimble screw is tightly inserted and a seating-face portion against which a seating-face of the bolt head abuts. Then, the extended portion of the bushing and the lower nozzle are spot-welded on the side of the lower surface of the nozzle, to prevent rotation of the bushing. This can easily prevent the rotation of the bushing after adjustment, to simplify the assembling of the fuel assembly. (I.N.)

  18. In-Space Assembly Capability Assessment for Potential Human Exploration and Science Applications

    Science.gov (United States)

    Jefferies, Sharon A.; Jones, Christopher A.; Arney, Dale C.; Stillwagen, Frederic H.; Chai, Patrick R.; Hutchinson, Craig D.; Stafford, Matthew A.; Moses, Robert W.; Dempsey, James A.; Rodgers, Erica M.; hide

    2017-01-01

    Human missions to Mars present several major challenges that must be overcome, including delivering multiple large mass and volume elements, keeping the crew safe and productive, meeting cost constraints, and ensuring a sustainable campaign. Traditional methods for executing human Mars missions minimize or eliminate in-space assembly, which provides a narrow range of options for addressing these challenges and limits the types of missions that can be performed. This paper discusses recent work to evaluate how the inclusion of in-space assembly in space mission architectural concepts could provide novel solutions to address these challenges by increasing operational flexibility, robustness, risk reduction, crew health and safety, and sustainability. A hierarchical framework is presented to characterize assembly strategies, assembly tasks, and the required capabilities to assemble mission systems in space. The framework is used to identify general mission system design considerations and assembly system characteristics by assembly strategy. These general approaches are then applied to identify potential in-space assembly applications to address each challenge. Through this process, several focus areas were identified where applications of in-space assembly could affect multiple challenges. Each focus area was developed to identify functions, potential assembly solutions and operations, key architectural trades, and potential considerations and implications of implementation. This paper helps to identify key areas to investigate were potentially significant gains in addressing the challenges with human missions to Mars may be realized, and creates a foundation on which to further develop and analyze in-space assembly concepts and assembly-based architectures.

  19. Variation simulation for compliant sheet metal assemblies with applications

    Science.gov (United States)

    Long, Yufeng

    architectures, and some useful guidelines for selection of assembly architectures are summarized. In addition, to enhance the fault diagnosis, a systematic methodology is proposed for selection of measurement configurations. Specifically, principles involved in selecting measurements are generalized first; then, the corresponding quantitative indices are developed to evaluate the measurement configurations, and finally, examples are present.

  20. Selecting Operations for Assembler Encoding

    Directory of Open Access Journals (Sweden)

    Tomasz Praczyk

    2010-04-01

    Full Text Available Assembler Encoding is a neuro-evolutionary method in which a neural network is represented in the form of a simple program called Assembler Encoding Program. The task of the program is to create the so-called Network Definition Matrix which maintains all the information necessary to construct the network. To generate Assembler Encoding Programs and the subsequent neural networks evolutionary techniques are used.
    The performance of Assembler Encoding strongly depends on operations used in Assembler Encoding Programs. To select the most effective operations, experiments in the optimization and the predator-prey problem were carried out. In the experiments, Assembler Encoding Programs equipped with different types of operations were tested. The results of the tests are presented at the end of the paper.

  1. Gas separation membrane module assembly

    Science.gov (United States)

    Wynn, Nicholas P [Palo Alto, CA; Fulton, Donald A [Fairfield, CA

    2009-03-31

    A gas-separation membrane module assembly and a gas-separation process using the assembly. The assembly includes a set of tubes, each containing gas-separation membranes, arranged within a housing. The housing contains a tube sheet that divides the space within the housing into two gas-tight spaces. A permeate collection system within the housing gathers permeate gas from the tubes for discharge from the housing.

  2. Integral nuclear fuel element assembly

    International Nuclear Information System (INIS)

    Schluderberg, D. C.

    1985-01-01

    An integral nuclear fuel element assembly utilizes longitudinally finned fuel pins. The continuous or interrupted fins of the fuel pins are brazed to fins of juxtaposed fuel pins or directly to the juxtaposed fuel pins or both. The integrally brazed fuel assembly is designed to satisfy the thermal and hydraulic requirements of a fuel assembly lattice having moderator to fuel atom ratios required to achieve high conversion and breeding ratios

  3. Fuel assembly and reactor core

    International Nuclear Information System (INIS)

    Aoyama, Motoo; Koyama, Jun-ichi; Uchikawa, Sadao; Bessho, Yasunori; Nakajima, Akiyoshi; Maruyama, Hiromi; Ozawa, Michihiro; Nakamura, Mitsuya.

    1990-01-01

    The present invention concerns fuel assemblies charged in a BWR type reactor and the reactor core. The fuel assembly comprises fuel rods containing burnable poisons and fuel rods not containing burnable poisons. Both of the highest and the lowest gadolinia concentrations of the fuel rods containing gadolinia as burnable poisons are present in the lower region of the fuel assembly. This can increase the spectral shift effect without increasing the maximum linear power density. (I.N.)

  4. Rocket Assembly and Checkout Facility

    Data.gov (United States)

    Federal Laboratory Consortium — FUNCTION: Integrates, tests, and calibrates scientific instruments flown on sounding rocket payloads. The scientific instruments are assembled on an optical bench;...

  5. Assembly of the PLT device

    International Nuclear Information System (INIS)

    Marino, R.

    1975-11-01

    The assembly of the PLT device began in June 1974 with a preassembly of the mechanical structure at a remote site. The preassembly sequence incorporated final fabrication procedures with an initial staging operation. This successful staging/fabrication procedure proved to be an invaluable asset when the final assembly was started in August 1974. The assembly continued with the initial reassembly of the previously tested structural components at the final machine site. Construction was interrupted at several points to allow for toroidal field coil, vacuum vessel, and poloidal coil installation. Two phases of toroidal field coil power tests were included in the assembly sequence prior to, and just after the vacuum vessel insertion

  6. Next-generation transcriptome assembly

    Energy Technology Data Exchange (ETDEWEB)

    Martin, Jeffrey A.; Wang, Zhong

    2011-09-01

    Transcriptomics studies often rely on partial reference transcriptomes that fail to capture the full catalog of transcripts and their variations. Recent advances in sequencing technologies and assembly algorithms have facilitated the reconstruction of the entire transcriptome by deep RNA sequencing (RNA-seq), even without a reference genome. However, transcriptome assembly from billions of RNA-seq reads, which are often very short, poses a significant informatics challenge. This Review summarizes the recent developments in transcriptome assembly approaches - reference-based, de novo and combined strategies-along with some perspectives on transcriptome assembly in the near future.

  7. Airfoil nozzle and shroud assembly

    Science.gov (United States)

    Shaffer, J.E.; Norton, P.F.

    1997-06-03

    An airfoil and nozzle assembly are disclosed including an outer shroud having a plurality of vane members attached to an inner surface and having a cantilevered end. The assembly further includes a inner shroud being formed by a plurality of segments. Each of the segments having a first end and a second end and having a recess positioned in each of the ends. The cantilevered end of the vane member being positioned in the recess. The airfoil and nozzle assembly being made from a material having a lower rate of thermal expansion than that of the components to which the airfoil and nozzle assembly is attached. 5 figs.

  8. RHIC beam position monitor assemblies

    International Nuclear Information System (INIS)

    Cameron, P.R.; Grau, M.C.; Ryan, W.A.; Shea, T.J.; Sikora, R.E.

    1993-01-01

    Design calculations, design details, and fabrication techniques for the RHIC BPM Assemblies are discussed. The 69 mm aperture single plane detectors are 23 cm long short-circuited 50 ohm strip transmission lines subtending 80 degrees. They are mounted on the sextupole end of the Corrector-Quadrupole-Sextupole package and operate at liquid helium temperature. The 69 cm aperture was selected to be the same as that of the beampipe in the CQS package, the 23 cm length is a compromise between mechanical stability and electrical sensitivity to the long low-intensity proton and heavy ion bunches to be found in RHIC during commissioning, and the 80 degree subtended angle maximizes linear aperture. The striplines are aligned after brazing to maintain electrical-to-mechanical centers within 0.1 mm radius, eliminating the need for individual calibration. Because the cryogenic feedthrus isolate the UHV beam vacuum only from the HV insulating vacuum, and do not see liquid helium, a replaceable mini-ConFlat design was chosen to simplify fabrication, calibration, and maintenance

  9. RHIC Beam Position Monitor Assemblies

    International Nuclear Information System (INIS)

    Cameron, P.R.; Grau, M.C.; Ryan, W.A.; Shea, T.J.; Sikora, R.E.

    1993-01-01

    Design calculations, design details, and fabrication techniques for the RHIC BPM Assemblies are discussed. The 69 mm aperture single plane detectors are 23 cm long short-circuited 50 ohm strip transmission lines subtending 80 degrees. They are mounted on the sextupole end of the Corrector-Quadrupole-Sextupole package and operate at liquid helium temperature. The 69 cm aperture was selected to be the same as that of the beampipe in the CQS package, dc 23 cm length is a compromise between mechanical stability and electrical sensitivity to the long low-intensity proton and heavy ion bunches to be found in RHIC during commissioning, and the 80 degree subtended angle maximizes linear aperture. The striplines are aligned after brazing to maintain electrical-to-mechanical centers within 0.1 mm radius, eliminating the need for individual calibration. Because the cryogenic feedthrus isolate the UHV beam vacuum only from the HV insulating vacuum, and do not see liquid helium, a replaceable mini-ConFlat design was chosen to simplify fabrication, calibration, and maintenance

  10. General Assembly pledges support for war against AIDS.

    Science.gov (United States)

    1988-03-01

    At a special meeting held in October 1987, the World Health Organization called for a concerted, international response to acquired immunodeficiency syndrome (AIDS). Announced was the creation of a WHO Global Commission on AIDS comprised of experts in health, social, economic, legal, ethical, and biomedical fields who will advise WHO officials of developments in various aspects of the disease. Member States were united in terms of the need for open communication and support of WHO efforts to combat AIDS. By December 1987, 129 countries had reported 73,747 AIDS cases to WHO and another 3 million new cases are likely to develop by 1982. The WHO strategy is based on several concepts: 1) even in the absence of a vaccine, AIDS is controllable through widespread education; 2) longterm commitment to eradication is necessary; 3) AIDS prevention and control must be integrated into national health systems; and 4) international cooperation, coordination, and leadership is vital. National AIDS committees have been established in over 100 countries.

  11. XXVI UIA Congress and General Assembly in Seoul

    Directory of Open Access Journals (Sweden)

    Elena Grigoryeva

    2017-12-01

    Full Text Available The article presents the results of the UIA World Congress and several fragments of the manifesto. It also touches on the participation of the Russian delegation in the previous Congresses. The important role of the Congresses in the dynamics of the current urbanization processes is pointed out.

  12. Will Mount Etna erupt before EGU General Assembly 2017?

    Science.gov (United States)

    Aloisi, Marco; Cannavo', Flavio; Palano, Mimmo

    2017-04-01

    Mount Etna has historically recorded a long and very various series of eruptions. The eruptions have mostly shown an episodic character, despite a near continuous supply of magma. In the last years, activity at Mount Etna seems to follow a recurrent pattern characterized by very similar "inflation/paroxysmal events/deflation" dynamic. The paroxysms occurred in December 2015 and May 2016, which involved the "Voragine" crater, can be considered among the most violent observed during the last two decades. These events showed high lava fountains, in the order of hundreds of meters in height, and eruption columns, several kilometres high. A new cycle, characterized by a clear similar inflation of the whole volcano edifice is currently underway. Here, we analyse these recent volcanic cycles and discuss about a) a possible upper bound for the inflation dynamic, above which a paroxysmal event occurs, b) the comparison of the models generating the considered lava fountains and c) a possible time-predictable model of the expected paroxysmal event.

  13. Automated optical assembly

    Science.gov (United States)

    Bala, John L.

    1995-08-01

    Automation and polymer science represent fundamental new technologies which can be directed toward realizing the goal of establishing a domestic, world-class, commercial optics business. Use of innovative optical designs using precision polymer optics will enable the US to play a vital role in the next generation of commercial optical products. The increased cost savings inherent in the utilization of optical-grade polymers outweighs almost every advantage of using glass for high volume situations. Optical designers must gain experience with combined refractive/diffractive designs and broaden their knowledge base regarding polymer technology beyond a cursory intellectual exercise. Implementation of a fully automated assembly system, combined with utilization of polymer optics, constitutes the type of integrated manufacturing process which will enable the US to successfully compete with the low-cost labor employed in the Far East, as well as to produce an equivalent product.

  14. Fuel sub-assembly

    International Nuclear Information System (INIS)

    Jolly, R.

    1988-01-01

    A nuclear fuel sub-assembly includes a hexagonal bundle of parallel, spaced apart fuel pins coupled at one end to an end-holding grid comprising a number of transverse spaced apart rails to each of which is connected a series of pin-receiving cells which render the pins axially captive with the rails. The series of cells are defined by a pair of metal strips each of which has a series of pocket formations such that when the pocket formations are in registry they define cylindrical shaped cells provided with internal projections which engage annular recesses in the end caps of the fuel pins to effect axial constraint of the pins. (author)

  15. Rotatable seal assembly

    International Nuclear Information System (INIS)

    Garibaldi, J.L.; Logan, C.M.

    1982-01-01

    An assembly is provided for rotatably supporting a rotor on a stator so that vacuum chambers in the rotor and stator remain in communication while the chambers are sealed from ambient air, which enables the use of a ball bearing or the like to support most of the weight of the rotor. The apparatus includes a seal device mounted on the rotor to rotate therewith, but shiftable in position on the rotor while being sealed to the rotor as by an oring. The seal device has a flat face that is biased towards a flat face on the stator, and pressurized air is pumped between the faces to prevent contact between them while spacing them a small distance apart to avoid the inflow of large amounts of air between the faces and into the vacuum chambers

  16. Reactor fuel assembly fastening

    International Nuclear Information System (INIS)

    Formanek, F.J.; Schukei, G.E.

    1980-01-01

    A nuclear fuel assembly is described, adapted to be locked into first mating surfaces on a core support stand, comprising a lower end fitting having posts for resting on the stand; elongated hook members pivotally connected at one end to the lower end fitting and having a second mating surface at the other end to engage the first mating surfaces; actuating means located between the posts on the lower end fitting and being vertically movable relative to the end fitting; and rigid links pivotally attached at one end to the hook members intermediate the connection of the hook members to the end fitting and the second mating surface and pivotally attached at the other end to the actuating means, the link having a length between the pivoted connections such that the second mating surface on the hook members locks into engagement with the first mating surfaces on the stand as the links approach the horizontal. (author)

  17. Nuclear fuel assembly

    International Nuclear Information System (INIS)

    Borrman, B.; Nylund, O.

    1984-01-01

    A fuel assembly with a fuel channel which surrounds a plurality of fuel rods and which is divided, by means of a stiffening device of cruciform cross-section and four wings, into four sub-channels each of which comprises a bundle of fuel rods. Each fuel channel side has a plurality of stamped, inwardly-directed projections, arranged vertically one after the other, aid projections being welded to one and the same stiffening wing. Each one of the wall portions located between the projections defines, together with two adjacently positioned projections and a portion of the stiffening wing, a communiation opening between two bundles located on on one side each of the stiffening wing. (Author)

  18. Nuclear fuel assembly

    International Nuclear Information System (INIS)

    Wakamatsu, Mitsuo.

    1974-01-01

    Object: To improve a circulating flow passage of coolant so as to be able to accurately detect the temperature of coolant, rare gases contained, and the like. Structure: A fuel assembly comprising a flow regulating lattice provided with a plurality of communication holes in an axial direction, said lattice being positioned at the upper end of an outer tube in which nuclear fuel elements are received, and a neutron shielding body having a plurality of spiral coolant flow passages disposed between the lattice and the nuclear fuel elements, whereby a coolant comprised of liquid sodium or the like, which moves up passing through the coolant flow passages and the flow regulating passage, is regulated and passed through a detector mounted at the upper part of the flow regulating lattice to detect coolant temperature, flow rate, and rare gases or the like as the origin of nuclear fission contained in the coolant due to breakage of fuel elements. (Kamimura, M.)

  19. Nuclear reactor assembly

    International Nuclear Information System (INIS)

    Dorner, H.; Scholz, M.; Jungmann, A.

    1975-01-01

    A nuclear reactor assembly includes a reactor pressure tank having a substantially cylindrical side wall surrounded by the wall of a cylindrical cavity formed by a biological shield. A rotative cylindrical wall is interposed between the walls and has means for rotating it from outside of the shield, and a probe is carried by the rotative wall for monitoring the pressure tank's wall. The probe is vertically movable relative to the rotative cylindrical wall, so that by the probe's vertical movement and rotation of the rotative cylinder, the reactor's wall can be very extensively monitored. If the reactor pressure tank's wall fails, it is contained by the rotative wall which is backed-up by the shield cavity wall. (Official Gazette)

  20. Subcritical nuclear assembly

    International Nuclear Information System (INIS)

    Vega C, H. R.

    2014-08-01

    A Subcritical Nuclear Assembly is a device where the nuclear-fission chain reaction is initiated and maintained using an external neutron source. It is a valuable educational and research tool where in a safe way many reactor parameters can be measured. Here, we have used the Wigner-Seitz method in the six-factor formula to calculate the effective multiplication factor of a subcritical nuclear reactor Nuclear Chicago model 9000. This reactor has approximately 2500 kg of natural uranium heterogeneously distributed in slugs. The reactor uses a 239 PuBe neutron source that is located in the center of an hexagonal array. Using Monte Carlo methods, with the MCNP5 code, a three-dimensional model of the subcritical reactor was designed to estimate the effective multiplication factor, the neutron spectra, the total and thermal neutron fluences along the radial and axial axis. With the neutron spectra in two locations outside the reactor the ambient dose equivalent were estimated. (Author)

  1. Nuclear fuel assembly

    International Nuclear Information System (INIS)

    Domoto, Noboru; Masuda, Hiroyuki

    1989-01-01

    In a nuclear fuel assembly loaded with a plurality of fuel rods, the inside of a fuel rod disposed at a high neutron flux region is divided into an inner region and an outer region, and more burnable poisons are mixed in the inner region than in the outer region. Alternatively, the central portion of a pellet disposed in a high neutron flux region is made hollow, in which burnable poisons are charged. This can prevent neutron infinite multiplication factor from decreasing extremely at the initial burning stage. Further, the burnable poisons are not rapidly burnt completely and local peaking coefficient can be controlled. Accordingly, in a case of suppressing a predetermined excess reactivity by using a fuel rod incorporated with the burnable poison, the fuel economy can be improved more and the reactor core controllability can also be improved as compared with the usual case. (T.M.)

  2. Reconfigurable assembly work station

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Yhu-Tin; Abell, Jeffrey A.; Spicer, John Patrick

    2017-11-14

    A reconfigurable autonomous workstation includes a multi-faced superstructure including a horizontally-arranged frame section supported on a plurality of posts. The posts form a plurality of vertical faces arranged between adjacent pairs of the posts, the faces including first and second faces and a power distribution and position reference face. A controllable robotic arm suspends from the rectangular frame section, and a work table fixedly couples to the power distribution and position reference face. A plurality of conveyor tables are fixedly coupled to the work table including a first conveyor table through the first face and a second conveyor table through the second face. A vision system monitors the work table and each of the conveyor tables. A programmable controller monitors signal inputs from the vision system to identify and determine orientation of the component on the first conveyor table and control the robotic arm to execute an assembly task.

  3. Multivalent protein assembly using monovalent self-assembling building blocks

    NARCIS (Netherlands)

    Petkau - Milroy, K.; Sonntag, M.H.; Colditz, A.; Brunsveld, L.

    2013-01-01

    Discotic molecules, which self-assemble in water into columnar supramolecular polymers, emerged as an alternative platform for the organization of proteins. Here, a monovalent discotic decorated with one single biotin was synthesized to study the self-assembling multivalency of this system in regard

  4. Method and apparatus for assembling a permanent magnet pole assembly

    Science.gov (United States)

    Carl, Jr., Ralph James; Bagepalli, Bharat Sampathkumaran [Niskayuna, NY; Jansen, Patrick Lee [Scotia, NY; Dawson, Richard Nils [Voorheesville, NY; Qu, Ronghai [Clifton Park, NY; Avanesov, Mikhail Avramovich [Moscow, RU

    2009-08-11

    A pole assembly for a rotor, the pole assembly includes a permanent magnet pole including at least one permanent magnet block, a plurality of laminations including a pole cap mechanically coupled to the pole, and a plurality of laminations including a base plate mechanically coupled to the pole.

  5. Self-assembly of self-assembled molecular triangles

    Indian Academy of Sciences (India)

    While the solution state structure of 1 can be best described as a trinuclear complex, in the solidstate well-fashioned intermolecular - and CH- interactions are observed. Thus, in the solid-state further self-assembly of already self-assembled molecular triangle is witnessed. The triangular panels are arranged in a linear ...

  6. Finishing of the cold mass assembly

    CERN Multimedia

    Patrice Loïez

    2001-01-01

    Photo 1 Technicians are putting in order the instrumentation wires. The prototype magnets were equipped with numerous sensors to monitor key parameters during the performance tests at cold conditions. Photo 2 The cold mass assembly is resting on special supports in order to allow the finishing operations. Technicians are putting in order the instrumentation wires. The prototype magnets were equipped with numerous sensors to monitor key parameters during the performance tests at cold conditions. Photo 3 View of the lyre-side end of the active part assembly. The extremity of the shrinking cylinder has been bevelled in view of welding the end cover. Photo 4 General view of the finishing station showing the special supporting structures (blue and yellow structures) needed for the geometric measurements and for the alignment operations. One can also see the light building surrounding the finishing station, which purpose is to isolate the laser measuring machines from disturbances. Photo 5 The extremity of the shri...

  7. ZPR-3 Assembly 6F : A spherical assembly of highly enriched uranium, depleted uranium, aluminum and steel with an average {sup 235}U enrichment of 47 atom %.

    Energy Technology Data Exchange (ETDEWEB)

    Lell, R. M.; McKnight, R. D; Schaefer, R. W.; Nuclear Engineering Division

    2010-09-30

    Assembly 6F (ZPR-3/6F), the final phase of the Assembly 6 program, simulated a spherical core with a thick depleted uranium reflector. ZPR-3/6F was designed as a fast reactor physics benchmark experiment with an average core {sup 235}U enrichment of approximately 47 at.%. Approximately 81.4% of the total fissions in this assembly occur above 100 keV, approximately 18.6% occur below 100 keV, and essentially none below 0.625 eV - thus the classification as a 'fast' assembly. This assembly is Fast Reactor Benchmark No. 7 in the Cross Section Evaluation Working Group (CSEWG) Benchmark Specifications and has historically been used as a data validation benchmark assembly. Loading of ZPR-3/6F began in late December 1956, and the experimental measurements were performed in January 1957. The core consisted of highly enriched uranium (HEU) plates, depleted uranium plates, perforated aluminum plates and stainless steel plates loaded into aluminum drawers, which were inserted into the central square stainless steel tubes of a 31 x 31 matrix on a split table machine. The core unit cell consisted of three columns of 0.125 in.-wide (3.175 mm) HEU plates, three columns of 0.125 in.-wide depleted uranium plates, nine columns of 0.125 in.-wide perforated aluminum plates and one column of stainless steel plates. The maximum length of each column of core material in a drawer was 9 in. (228.6 mm). Because of the goal to produce an approximately spherical core, core fuel and diluent column lengths generally varied between adjacent drawers and frequently within an individual drawer. The axial reflector consisted of depleted uranium plates and blocks loaded in the available space in the front (core) drawers, with the remainder loaded into back drawers behind the front drawers. The radial reflector consisted of blocks of depleted uranium loaded directly into the matrix tubes. The assembly geometry approximated a reflected sphere as closely as the square matrix tubes, the drawers and the

  8. INDIVIDUAL EDUCATION PROGRAMS

    Directory of Open Access Journals (Sweden)

    Snezhana NIKOLIKJ

    2006-06-01

    Full Text Available Inclusion, as a process of enrolling of children with disability in regular schools, demands obligation for adequate preparing regular schools, teachers, pupils and their parents for accepting those children. It, also, means that special services must be prepared to help teachers and children with disability too, in an adequate way. The first and most important step is developing of Individualized education programs (IEP.The purpose of IEP is to provide a disabled child with specialized or individualized assistance in school. In order an IEP to be developed for a child, it is necessary to evaluate a child, and than to determine goals of individual achievements for every pupil with disability.The aim of this paper is to show one of many ways for construction IEP. The paper will give some examples of IEP recommendation (general and special, goals and steps to determine programs and types of services.

  9. Solving a meiotic LEGO puzzle: transverse filaments and the assembly of the synaptonemal complex in Caenorhabditis elegans.

    Science.gov (United States)

    Hawley, R Scott

    2011-10-01

    The structure of the meiosis-specific synaptonemal complex, which is perhaps the central visible characteristic of meiotic prophase, has been a matter of intense interest for decades. Although a general picture of the interactions between the transverse filament proteins that create this structure has emerged from studies in a variety of organisms, a recent analysis of synaptonemal complex structure in Caenorhabditis elegans by Schild-Prüfert et al. (2011) has provided the clearest picture of the structure of the architecture of a synaptonemal complex to date. Although the transverse filaments of the worm synaptonemal complex are assembled differently then those observed in yeast, mammalian, and Drosophila synaptonemal complexes, a comparison of the four assemblies shows that achieving the overall basic structure of the synaptonemal complex is far more crucial than conserving the structures of the individual transverse filaments.

  10. Moisture Research - Optimizing Wall Assemblies

    Energy Technology Data Exchange (ETDEWEB)

    Arena, L.; Mantha, P.

    2013-05-01

    The Consortium for Advanced Residential Buildings (CARB) evaluated several different configurations of wall assemblies to determine the accuracy of moisture modeling and make recommendations to ensure durable, efficient assemblies. WUFI and THERM were used to model the hygrothermal and heat transfer characteristics of these walls.

  11. Fuel cell sub-assembly

    Science.gov (United States)

    Chi, Chang V.

    1983-01-01

    A fuel cell sub-assembly comprising a plurality of fuel cells, a first section of a cooling means disposed at an end of the assembly and means for connecting the fuel cells and first section together to form a unitary structure.

  12. Newnes electronics assembly pocket book

    CERN Document Server

    Brindley, Keith

    2013-01-01

    Produced in association with the Engineering Training Authority with contributions from dozens of people in the electronics industry. The material covers common skills in electrical and electronic engineering and concentrates mainly on wiring and assembly. 'Newnes Electronics Assembly Pocket Book' is for electronics technicians, students and apprentices.

  13. INTEGRATION OF SHIP HULL ASSEMBLY SEQUENCE PLANNING, SCHEDULING AND BUDGETING

    Directory of Open Access Journals (Sweden)

    Remigiusz Romuald Iwańkowicz

    2015-02-01

    Full Text Available The specificity of the yard work requires the particularly careful treatment of the issues of scheduling and budgeting in the production planning processes. The article presents the method of analysis of the assembly sequence taking into account the duration of individual activities and the demand for resources. A method of the critical path and resource budgeting were used. Modelling of the assembly was performed using the acyclic graphs. It has been shown that the assembly sequences can have very different feasible budget regions. The proposed model is applied to the assembly processes of large-scale welded structures, including the hulls of ships. The presented computational examples have a simulation character. They show the usefulness of the model and the possibility to use it in a variety of analyses.

  14. A Framework for Geometric Reasoning About Human Figures and Factors in Assembly Processes

    Energy Technology Data Exchange (ETDEWEB)

    Calton, Terri L.

    1999-07-20

    Automatic assembly sequencing and visualization tools are valuable in determining the best assembly sequences, but without Human Factors and Figure Models (HFFMs) it is difficult to evaluate or visualize human interaction. In industry, accelerating technological advances and shorter market windows have forced companies to turn to an agile manufacturing paradigm. This trend has promoted computerized automation of product design and manufacturing processes, such as automated assembly planning. However, all automated assembly planning software tools assume that the individual components fly into their assembled configuration and generate what appear to be perfectly valid operations, but in reality some operations cannot physically be carried out by a human. For example, the use of a ratchet may be reasoned feasible for an assembly operation; however, when a hand is placed on the tool the operation is no longer feasible, perhaps because of inaccessibility, insufficient strength or human interference with assembly components. Similarly, human figure modeling algorithms may indicate that assembly operations are not feasible and consequently force design modifications, however, if they had the capability to quickly generate alternative assembly sequences, they might have identified a feasible solution. To solve this problem, HFFMs must be integrated with automated assembly planning which allows engineers to quickly verify that assembly operations are possible and to see ways to make the designs even better. This paper presents a framework for integrating geometry-based assembly planning algorithms with commercially available human figure modeling software packages. Experimental results to selected applications along with lessons learned are presented.

  15. Advanced gray rod control assembly

    Science.gov (United States)

    Drudy, Keith J; Carlson, William R; Conner, Michael E; Goldenfield, Mark; Hone, Michael J; Long, Jr., Carroll J; Parkinson, Jerod; Pomirleanu, Radu O

    2013-09-17

    An advanced gray rod control assembly (GRCA) for a nuclear reactor. The GRCA provides controlled insertion of gray rod assemblies into the reactor, thereby controlling the rate of power produced by the reactor and providing reactivity control at full power. Each gray rod assembly includes an elongated tubular member, a primary neutron-absorber disposed within the tubular member said neutron-absorber comprising an absorber material, preferably tungsten, having a 2200 m/s neutron absorption microscopic capture cross-section of from 10 to 30 barns. An internal support tube can be positioned between the primary absorber and the tubular member as a secondary absorber to enhance neutron absorption, absorber depletion, assembly weight, and assembly heat transfer characteristics.

  16. Method of transporting fuel assemblies

    International Nuclear Information System (INIS)

    Okada, Katsutoshi.

    1979-01-01

    Purpose: To enable safety transportation of fuel assemblies for FBR type reactors by surrounding each of fuel elements in a wrapper tube by a rubbery, hollow cylindrical container and by sealing medium such as air to the inside of the container. Method: A fuel element is contained in a hollow cylindrical rubber-like tube. The fuel element has an upper end plug, a lower end plug and a wire spirally wound around the outer periphery. Upon transportation of the fuel assemblies, each of the fuel elements is covered with the container and arranged in the wrapper tube and then the fuel assemblies are assembled. Then, medium such as air is sealed for each of the fuel elements by way of an opening and then the opening is tightly closed. Before loading the transported fuel assemblies in the reactor, the medium is discharged through the opening and the container is completely extracted and removed from the inside of the wrapper tube. (Seki, T.)

  17. General report

    International Nuclear Information System (INIS)

    Nicklisch, F.

    1984-01-01

    Growing complexity of technical matter has meant that technical expertise is called upon in more and more legal proceedings. The technical expert is, in general terms, the mediator between technology and the law, he is also entrusted with the task of pointing up the differences in approach and in the nature of authority in these two areas and thus paving the way for mutual understanding. The evaluation of the technical expert's opinion is one of the cardinal problems bound up with the role of the expert in legal procedure. After the presentation of the expert's opinion, the judge is supposed to possess so much specialised knowledge that he can assess the opinion itself in scientific and technical respects and put his finger on any errors the expert may have made. This problem can only be solved via an assessment opinion. First of all, the opinion can be assessed indirectly via evaluation of the credentials and the neutrality and independence of the expert. In direct terms, the opinion can be subjected to a certain - albeit restricted - scrutiny, whether it is generally convincing, as far as the layman is competent to judge. This interpretation alone makes it possible to classify and integrate legally the technical standards and regulations represent expert statements on the scientific and technical theorems based on the knowledge and experience gained in a given area. They are designed to reflect prevailing opinion among leading representatives of the profession and can thus themselves be regarded as expert opinions. As a rule, these opinions will have such weight that - other than in exceptional cases - they will not be invalidated in procedure by deviating opinions from individual experts. (orig./HSCH) [de

  18. The immitigable nature of assembly bias: the impact of halo definition on assembly bias

    Science.gov (United States)

    Villarreal, Antonio S.; Zentner, Andrew R.; Mao, Yao-Yuan; Purcell, Chris W.; van den Bosch, Frank C.; Diemer, Benedikt; Lange, Johannes U.; Wang, Kuan; Campbell, Duncan

    2017-11-01

    Dark matter halo clustering depends not only on halo mass, but also on other properties such as concentration and shape. This phenomenon is known broadly as assembly bias. We explore the dependence of assembly bias on halo definition, parametrized by spherical overdensity parameter, Δ. We summarize the strength of concentration-, shape-, and spin-dependent halo clustering as a function of halo mass and halo definition. Concentration-dependent clustering depends strongly on mass at all Δ. For conventional halo definitions (Δ ∼ 200 - 600 m), concentration-dependent clustering at low mass is driven by a population of haloes that is altered through interactions with neighbouring haloes. Concentration-dependent clustering can be greatly reduced through a mass-dependent halo definition with Δ ∼ 20 - 40 m for haloes with M200 m ≲ 1012 h-1M⊙. Smaller Δ implies larger radii and mitigates assembly bias at low mass by subsuming altered, so-called backsplash haloes into now larger host haloes. At higher masses (M200 m ≳ 1013 h-1M⊙) larger overdensities, Δ ≳ 600 m, are necessary. Shape- and spin-dependent clustering are significant for all halo definitions that we explore and exhibit a relatively weaker mass dependence. Generally, both the strength and the sense of assembly bias depend on halo definition, varying significantly even among common definitions. We identify no halo definition that mitigates all manifestations of assembly bias. A halo definition that mitigates assembly bias based on one halo property (e.g. concentration) must be mass dependent. The halo definitions that best mitigate concentration-dependent halo clustering do not coincide with the expected average splashback radii at fixed halo mass.

  19. Community assembly of the worm gut microbiome

    Science.gov (United States)

    Gore, Jeff

    It has become increasingly clear that human health is strongly influenced by the bacteria that live within the gut, known collectively as the gut microbiome. This complex community varies tremendously between individuals, but understanding the sources that lead to this heterogeneity is challenging. To address this challenge, we are using a bottom-up approach to develop a predictive understanding of how the microbiome assembles and functions within a simple and experimentally tractable gut, the gut of the worm C. elegans. We have found that stochastic community assembly in the C. elegansintestine is sufficient to produce strong inter-worm heterogeneity in community composition. When worms are fed with two neutrally-competing fluorescently labeled bacterial strains, we observe stochastically-driven bimodality in community composition, where approximately half of the worms are dominated by each bacterial strain. A simple model incorporating stochastic colonization suggests that heterogeneity between worms is driven by the low rate at which bacteria successfully establish new intestinal colonies. We can increase this rate experimentally by feeding worms at high bacterial density; in these conditions the bimodality disappears. We have also characterized all pairwise interspecies competitions among a set of eleven bacterial species, illuminating the rules governing interspecies community assembly. These results demonstrate the potential importance of stochastic processes in bacterial community formation and suggest a role for C. elegans as a model system for ecology of host-associated communities.

  20. Surface mediated assembly of small, metastable gold nanoclusters

    Science.gov (United States)

    Pettibone, John M.; Osborn, William A.; Rykaczewski, Konrad; Talin, A. Alec; Bonevich, John E.; Hudgens, Jeffrey W.; Allendorf, Mark D.

    2013-06-01

    The unique properties of metallic nanoclusters are attractive for numerous commercial and industrial applications but are generally less stable than nanocrystals. Thus, developing methodologies for stabilizing nanoclusters and retaining their enhanced functionality is of great interest. We report the assembly of PPh3-protected Au9 clusters from a heterogeneous mixture into films consisting of sub 3 nm nanocluster assemblies. The depositing nanoclusters are metastable in solution, but the resulting nanocluster assemblies are stabilized indefinitely in air or fresh solvent. The films exhibit distinct structure from Au nanoparticles observed by X-ray diffraction, and film dissolution data support the preservation of small nanoclusters. UV-Vis spectroscopy, electrospray ionization mass spectrometry, X-ray photoelectron spectroscopy and electron microscopy are used to elucidate information regarding the nanocluster formation and assembly mechanism. Preferential deposition of nanocluster assemblies can be achieved on multiple substrates, including polymer, Cr, Si, SiO2, SiNx, and metal-organic frameworks (MOFs). Unlike other vapor phase coating processes, nanocluster assembly on the MIL-68(In) MOF crystal is capable of preferentially coating the external surface and stabilizing the crystal structure in hydrothermal conditions, which should enhance their storage, separation and delivery capabilities.The unique properties of metallic nanoclusters are attractive for numerous commercial and industrial applications but are generally less stable than nanocrystals. Thus, developing methodologies for stabilizing nanoclusters and retaining their enhanced functionality is of great interest. We report the assembly of PPh3-protected Au9 clusters from a heterogeneous mixture into films consisting of sub 3 nm nanocluster assemblies. The depositing nanoclusters are metastable in solution, but the resulting nanocluster assemblies are stabilized indefinitely in air or fresh solvent. The