WorldWideScience

Sample records for gen iv nuclear

  1. Developing new nuclear curricula for GEN IV needs

    International Nuclear Information System (INIS)

    Ghitescu, P.; Pavel, G.L.

    2014-01-01

    States who wish to start and develop a nuclear program must take into consideration a strong proven strategy for developing a sustainable program. A complete nuclear research program must include: a good national strategy and support on the topic; strong research laboratories supported by good personnel; education component to provide sustainable and qualified workforce; national/international interest from stakeholders and governments and a well informed society. New demonstrators are foreseen for the next period to be built in Europe and skilled supporting personnel is strongly needed. Current situation in nuclear higher education with perspective will be analysed. EURATOM strongly supports development of multidisciplinary co-operational projects in order to built such novel initiatives. An example of such program supported by European Commission, ARCADIA, will be given. The project is based on the cooperation of a large number of participants all over Europe and the main purpose is to develop a road-map for Gen IV reactor. (authors)

  2. Structural materials for Gen-IV nuclear reactors: Challenges and opportunities

    Science.gov (United States)

    Murty, K. L.; Charit, I.

    2008-12-01

    Generation-IV reactor design concepts envisioned thus far cater toward a common goal of providing safer, longer lasting, proliferation-resistant and economically viable nuclear power plants. The foremost consideration in the successful development and deployment of Gen-IV reactor systems is the performance and reliability issues involving structural materials for both in-core and out-of-core applications. The structural materials need to endure much higher temperatures, higher neutron doses and extremely corrosive environment, which are beyond the experience of the current nuclear power plants. Materials under active consideration for use in different reactor components include various ferritic/martensitic steels, austenitic stainless steels, nickel-base superalloys, ceramics, composites, etc. This paper presents a summary of various Gen-IV reactor concepts, with emphasis on the structural materials issues depending on the specific application areas. This paper also discusses the challenges involved in using the existing materials under both service and off-normal conditions. Tasks become increasingly complex due to the operation of various fundamental phenomena like radiation-induced segregation, radiation-enhanced diffusion, precipitation, interactions between impurity elements and radiation-produced defects, swelling, helium generation and so forth. Further, high temperature capability (e.g. creep properties) of these materials is a critical, performance-limiting factor. It is demonstrated that novel alloy and microstructural design approaches coupled with new materials processing and fabrication techniques may mitigate the challenges, and the optimum system performance may be achieved under much demanding conditions.

  3. Overview of nuclear safety activities performed by JRC-IE on Gen IV fast reactor concepts

    Energy Technology Data Exchange (ETDEWEB)

    Tsige-Tamirat, H.; Ammirabile, L.; D' Agata, E.; Fuetterer, M.; Ranguelova, V. [European Commission, Joint Research Centre, Institute for Energy, Westerduinweg 3, 1755LE Petten (Netherlands)

    2010-07-01

    The European Strategic Energy Technology (SET) Plan recognizes the need to develop new energy technologies, in order to reduce greenhouse gas emissions and secure energy supply in Europe. Besides renewable energy and improved energy efficiency, a new generation of nuclear power plants and innovative nuclear power applications can play a significant role to achieve this goal. The JRC Institute for Energy 'Safety of Future Nuclear Reactors' (SFNR) Unit is engaged in experimental research, numerical simulation and modelling, scientific, feasibility and engineering studies on innovative nuclear reactor systems. This also represents a significant EURATOM contribution to the Generation IV International Forum. Its activities deal with, among others, the performance assessment of innovative fuels and materials, development of new reactor core concepts and safety solutions, and knowledge management and preservation. Special attention is given to fast reactor concepts, namely the sodium (SFR) and lead (LFR) cooled reactors. Recognizing the maturity of the SFR technology, the European Sustainable Nuclear Energy Technology Platform (SNETP) considers a prototype SFR to be built as a next-step towards the deployment of a first-of-a-kind Gen IV SFR. This paper gives an overview of current research preformed at JRC-IE with emphasis on the work performed in the Collaborative Project on European Sodium Fast Reactor (CP-ESFR) within the European Commission's Seventh Framework Program. (authors)

  4. Overview of nuclear safety activities performed by JRC-IE on Gen IV fast reactor concepts

    International Nuclear Information System (INIS)

    Tsige-Tamirat, H.; Ammirabile, L.; D'Agata, E.; Fuetterer, M.; Ranguelova, V.

    2010-01-01

    The European Strategic Energy Technology (SET) Plan recognizes the need to develop new energy technologies, in order to reduce greenhouse gas emissions and secure energy supply in Europe. Besides renewable energy and improved energy efficiency, a new generation of nuclear power plants and innovative nuclear power applications can play a significant role to achieve this goal. The JRC Institute for Energy 'Safety of Future Nuclear Reactors' (SFNR) Unit is engaged in experimental research, numerical simulation and modelling, scientific, feasibility and engineering studies on innovative nuclear reactor systems. This also represents a significant EURATOM contribution to the Generation IV International Forum. Its activities deal with, among others, the performance assessment of innovative fuels and materials, development of new reactor core concepts and safety solutions, and knowledge management and preservation. Special attention is given to fast reactor concepts, namely the sodium (SFR) and lead (LFR) cooled reactors. Recognizing the maturity of the SFR technology, the European Sustainable Nuclear Energy Technology Platform (SNETP) considers a prototype SFR to be built as a next-step towards the deployment of a first-of-a-kind Gen IV SFR. This paper gives an overview of current research preformed at JRC-IE with emphasis on the work performed in the Collaborative Project on European Sodium Fast Reactor (CP-ESFR) within the European Commission's Seventh Framework Program. (authors)

  5. The safety R and D for GEN-IV reactors in the European nuclear energy technology platform strategic research agenda

    International Nuclear Information System (INIS)

    Bruna, G.

    2009-01-01

    In the fall 2007 EC launched the Sustainable Nuclear Energy Technology Platform (SNE-TP). The SNE-TP governing board set-up three working groups (WG): 1) Strategic Research Agenda (SRA) WG, in charge of drafting road-maps to support research, development and demonstration for current and future NPPs; 2) Deployment Strategy (DS) WG, in charge of defining the research road-map implementation and 3) Education, Training and Knowledge management (ETKM) WG, which was aimed at issuing proposal to reinforce European education and attract young in the nuclear field. The SRA WG was mandated to prepare the SRA vision document based on the preliminary road-map sketched in the document published by the Commission earlier in 2007. The SRA WG was originally organized in 5 sub-groups covering specific topics (1) GEN II and III, III+, including Advanced LWR, 2) Advanced Fuel Cycle for waste minimization and resource optimization; 3) GEN IV Fast Systems (SFR, LFR, GFR, ADS); 4) GEN IV (V) HTR and non-electricity-production applications; 5) New Nuclear Large Research Infrastructures) and 5 other sub-groups dealing with more generic cross-cutting research activities applicable to many specific topics, namely: 1) Structural material research; 2) modeling, simulation and methods, including physical data and tools and means for qualification and validation; 3) Reactor Safety, including severe accidents and human factor; 4) Advanced Driver and Minor Actinide Fuels: science and properties; 5) Pre-normative Research, Codes and Standards.The present paper is mainly aimed at summarizing the content of the SRA Safety sub-chapter focusing on GEN-IV aspects

  6. Gen IV. Technical and economical aspects

    International Nuclear Information System (INIS)

    Kaluzny, Y.; Legee, F.

    2010-01-01

    In this presentation author deals with development of nuclear reactor type of Generation IV. He concluded that: - Nuclear energy is competitive with regards to the other generation sources; Its competitiveness also increases with CO 2 cost. Considering the nuclear cost breakdown of LWR reactors, it turns out that the uranium is currently not in the range of a threshold for FBR deployment; - The global balance of uranium supply and demand and also innovation required to fulfil GEN IV objectives would probably imply the emergence of fast reactor competitiveness after the turn of the mid-century; - We shall need fast reactors in the coming decade.

  7. ASN’s actions in GEN IV reactors and Sodium Fast Reactors (SFR)

    International Nuclear Information System (INIS)

    Belot, Clotilde

    2013-01-01

    The ASN is involved in 3 actions concerning GEN IV: • Overview of nuclear reactor GEN IV systems; • Specific analysis about transmutation; • Prototype reactor ASTRID (SFR). Furthermore theses actions are in the beginning (no conclusions or results available)

  8. A Review of Alloy 800H for Applications in the Gen IV Nuclear Energy Systems

    International Nuclear Information System (INIS)

    Ren, Weiju; Swindeman, Robert W.

    2010-01-01

    Alloy 800H is currently under consideration for applications in the Next Generation Nuclear Plant at operational temperatures above 750 C. To provide supporting information in this paper at the attempt to facilitate the consideration, service requirements of the nuclear system for structural materials is first described; and then an extensive review of Alloy 800H is given on its codification with respect to development and research history, mechanical behavior and design allowables, metallurgical aging resistance, environmental effect considerations, data requirements and availability, weldments, as well as many other aspects relevant to the intended nuclear application; an finally further research and development activities to support the materials qualification are suggested.

  9. The ENEN-III project: Technical Training on the Concepts and Design of GEN IV nuclear reactors

    International Nuclear Information System (INIS)

    Berkvens, T.; Renault, C.; Alonso, M.; Salomaa, R.; Schönfelder, C.

    2013-01-01

    Some conclusions: • Not enough training courses to cover the LO’s: – Especially GEN IV; – Many introductory courses, little specific courses; – Reach out to other partners for more courses. • Skills and Attitudes: – Much more difficult to train/measure; – To be treated in a separate project. • Use of Learning Outcomes must be promoted; • Involvement of human resources necessary for the successful implementation of the schemes: – End of project workshop

  10. Market share scenarios for Gen-DIII and gen-IV reactors in Europe

    International Nuclear Information System (INIS)

    Roelofs, F.; Heek, A. V.; Durpel, L. V. D.

    2008-01-01

    Nuclear energy is back on the agenda worldwide in order to meet growing energy demand and especially the growth in electricity demand. Many objectives direct to an increased use of nuclear energy, i.e. minimising energy costs, reducing climate change effects and others. In the light of the potential renewed growth of nuclear energy, the public demands a clear view on what nuclear energy may contribute towards meeting these objectives and especially how nuclear energy may address some socio-political obstructions with respect to economics, radioactive waste, safety and proliferation of fissile materials. To address these questions, the future nuclear reactor park mix in Europe has been analysed applying an integrated dynamic process modelling technique. Various market share scenarios for nuclear energy are derived including sub-variants with regard to the intra-nuclear options. In the analyses, it is assumed that different types of new reactors may be built, taking into account the introduction date of considered Gen-Ill (i.e. EPR) and Gen-IV (i.e. SCWR, HTR, FR) reactors, and the economic evaluation of the complete fuel cycle. The assessment was undertaken using the DANESS code (Dynamic Analysis of Nuclear Energy System Strategies). The analyses show that given the considered realistic nuclear energy demand and given a limited number of available Gen-III and Gen-IV reactor types, the future European nuclear park will exist of combinations of Gen-III and Gen-IV reactors. This mix will always consist of a set of reactor types each having its specific strengths. The analyses also highlight the triggers influencing the choice between different nuclear energy deployment scenarios. (authors)

  11. Gen IV Materials Handbook Implementation Plan

    International Nuclear Information System (INIS)

    Rittenhouse, P.; Ren, W.

    2005-01-01

    A Gen IV Materials Handbook is being developed to provide an authoritative single source of highly qualified structural materials information and materials properties data for use in design and analyses of all Generation IV Reactor Systems. The Handbook will be responsive to the needs expressed by all of the principal government, national laboratory, and private company stakeholders of Gen IV Reactor Systems. The Gen IV Materials Handbook Implementation Plan provided here addresses the purpose, rationale, attributes, and benefits of the Handbook and will detail its content, format, quality assurance, applicability, and access. Structural materials, both metallic and ceramic, for all Gen IV reactor types currently supported by the Department of Energy (DOE) will be included in the Gen IV Materials Handbook. However, initial emphasis will be on materials for the Very High Temperature Reactor (VHTR). Descriptive information (e.g., chemical composition and applicable technical specifications and codes) will be provided for each material along with an extensive presentation of mechanical and physical property data including consideration of temperature, irradiation, environment, etc. effects on properties. Access to the Gen IV Materials Handbook will be internet-based with appropriate levels of control. Information and data in the Handbook will be configured to allow search by material classes, specific materials, specific information or property class, specific property, data parameters, and individual data points identified with materials parameters, test conditions, and data source. Details on all of these as well as proposed applicability and consideration of data quality classes are provided in the Implementation Plan. Website development for the Handbook is divided into six phases including (1) detailed product analysis and specification, (2) simulation and design, (3) implementation and testing, (4) product release, (5) project/product evaluation, and (6) product

  12. Gen IV Materials Handbook Functionalities and Operation

    International Nuclear Information System (INIS)

    Ren, Weiju

    2009-01-01

    This document is prepared for navigation and operation of the Gen IV Materials Handbook, with architecture description and new user access initiation instructions. Development rationale and history of the Handbook is summarized. The major development aspects, architecture, and design principles of the Handbook are briefly introduced to provide an overview of its past evolution and future prospects. Detailed instructions are given with examples for navigating the constructed Handbook components and using the main functionalities. Procedures are provided in a step-by-step fashion for Data Upload Managers to upload reports and data files, as well as for new users to initiate Handbook access.

  13. Gen IV Materials Handbook Functionalities and Operation

    Energy Technology Data Exchange (ETDEWEB)

    Ren, Weiju [ORNL

    2009-12-01

    This document is prepared for navigation and operation of the Gen IV Materials Handbook, with architecture description and new user access initiation instructions. Development rationale and history of the Handbook is summarized. The major development aspects, architecture, and design principles of the Handbook are briefly introduced to provide an overview of its past evolution and future prospects. Detailed instructions are given with examples for navigating the constructed Handbook components and using the main functionalities. Procedures are provided in a step-by-step fashion for Data Upload Managers to upload reports and data files, as well as for new users to initiate Handbook access.

  14. GEN IV reactors: Where we are, where we should go

    International Nuclear Information System (INIS)

    Locatelli, G.; Mancini, M.; Todeschini, N.

    2012-01-01

    GEN IV power plants represent the mid-long term option of the nuclear sector. International literature proposes many papers and reports dealing with these reactors, but there is an evident difference of type and shape of information making impossible each kind of detailed comparison. Moreover, authors are often strongly involved in some particular design; this creates many difficulties in their super-partes position. Therefore it is necessary to put order in the most relevant information to understand strengths and weaknesses of each design and derive an overview useful for technicians and policy makers. This paper presents the state-of the art for GEN IV nuclear reactors providing a comprehensive literature review of the different designs with a relate taxonomy. It presents the more relevant references, data, advantages, disadvantages and barriers to the adoptions. In order to promote an efficient and wide adoption of GEN IV reactors the paper provides the pre-conditions that must be accomplished, enabling factors promoting the implementation and barriers limiting the extent and intensity of its implementation. It concludes outlying the state of the art of the most important R and D areas and the future achievements that must be accomplished for a wide adoption of these technologies. (authors)

  15. JRC-IE's research of safety of Gen IV systems

    International Nuclear Information System (INIS)

    Tsige-Tamirat, H.; Ranguelova, V.; Feutterer, M.; Ammirabile, L.; Carlsson, J.; D'Agata, E.; Laurie, M.; Magallon, D.

    2010-01-01

    The Institute for Energy (IE), one of the seven scientific Institutes of the Joint Research Centre (JRC) of the European Commission, has the mission to provide scientific and technical support for the conception, development, implementation and monitoring of community policies related to energy. To accomplish its mission, IE performs research in the areas of renewable energies, safety and sustainability of nuclear energy for current and future reactor systems, energy technic/economic assessment, and security of energy supply. The Generation IV International Forum (GIF) is a cooperative international endeavour organized to carry out R and D needed to establish the feasibility and performance capabilities of the next generation nuclear energy systems and support the progress towards their realization. The EU, represented by EURATOM and with the JRC as implementing agent, is working together with other GIF partners to perform pre-competitive R and D on key technologies to be implemented in future nuclear systems. IE is engaged in experimental research, simulation and modeling, scientific, feasibility and engineering studies on innovative nuclear reactor systems needed to support the EURATOM contribution to GEN IV initiative, in particular in assessment of innovative fuels and materials, development of new reactor core concepts and safety solutions and knowledge management and preservation. IE's research activities on Generation IV reactor systems are focused on the assessment of the potential of such systems to meet long term EU energy needs with respect to economical advantages, enhanced safety, sustainability, and proliferation resistance. IE participates in international collaborations and has bilateral research cooperation both with European and non-European partners. This paper gives an overview of IE's current research activities on the Gen IV reactor systems related to safety. (authors)

  16. New Materials for NGNP/Gen IV

    International Nuclear Information System (INIS)

    Swindeman, Robert W.; Marriott, Douglas L.

    2009-01-01

    The bounding conditions were briefly summarized for the Next Generation Nuclear Plant (NGNP) that is the leading candidate in the Department of Energy Generation IV reactor program. Metallic materials essential to the successful development and proof of concept for the NGNP were identified. The literature bearing on the materials technology for high-temperature gas-cooled reactors was reviewed with emphasis on the needs identified for the NGNP. Several materials were identified for a more thorough study of their databases and behavioral features relative to the requirements ASME Boiler and Pressure Vessel Code, Section III, Division 1, Subsection NH.

  17. Materials for generation-IV nuclear reactors

    International Nuclear Information System (INIS)

    Alvarez, M. G.

    2009-01-01

    Materials science and materials development are key issues for the implementation of innovative reactor systems such as those defined in the framework of the Generation IV. Six systems have been selected for Generation IV consideration: gas-cooled fast reactor, lead-cooled fast reactor, molten salt-cooled reactor, sodium-cooled fast reactor, supercritical water-cooled reactor, and very high temperature reactor. The structural materials need to resist much higher temperatures, higher neutron doses and extremely corrosive environment, which are beyond the experience of the current nuclear power plants. For this reason, the first consideration in the development of Generation-IV concepts is selection and deployment of materials that operate successfully in the aggressive operating environments expected in the Gen-IV concepts. This paper summarizes the Gen-IV operating environments and describes the various candidate materials under consideration for use in different structural applications. (author)

  18. Improvement of Steam Generator Reliability for GEN-IV SFR

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Seong O; Kim Se Yun; Kim, Seok Hoon; Eoh, Jae Hyuk; Lee, Hyeong Yeon; Choi, Byung Seon

    2005-11-15

    The R and D items performed in this study were selected from the R and D task of ' Reliability improvement of Steam Generator' of GEN-IV SFR Component Design and BOP. Since this project deals with one of the most important issues for a GEN-IV SFR system, it needs to enhance the domestic technical backgrounds associated with the corresponding R and D items even for a very short period by 2005. This study provides the R and D results for i) Development of assessment methodology for dissimilar metal weld and ii) Development of multi-dimensional simulation methodology for a SWR event in a SFR steam generator.

  19. Improvement of Steam Generator Reliability for GEN-IV SFR

    International Nuclear Information System (INIS)

    Kim, Seong O; Kim Se Yun; Kim, Seok Hoon; Eoh, Jae Hyuk; Lee, Hyeong Yeon; Choi, Byung Seon

    2005-11-01

    The R and D items performed in this study were selected from the R and D task of ' Reliability improvement of Steam Generator' of GEN-IV SFR Component Design and BOP. Since this project deals with one of the most important issues for a GEN-IV SFR system, it needs to enhance the domestic technical backgrounds associated with the corresponding R and D items even for a very short period by 2005. This study provides the R and D results for i) Development of assessment methodology for dissimilar metal weld and ii) Development of multi-dimensional simulation methodology for a SWR event in a SFR steam generator

  20. Building competencies for New Gen IV Reactors

    International Nuclear Information System (INIS)

    Pavel, G.L.; Ghitescu, P.

    2015-01-01

    The Advanced Lead Fast Reactor European Demonstrator - ALFRED is designed and sustained by several European countries. It is a 300 MWt (125 MWe) reactor, intended to be built in Romania, near the Pitesti site. Pure lead is used as primary coolant and it is foreseen to have a 40% thermal efficiency. Secondary cycle contains superheated water steam at around 450 Celsius degrees. Through ARCADIA cooperation, 26 partners from all over Europe joined their forces to provide the necessary research support for ALFRED. In Romania, several entities are providing nuclear courses but only the University Politechnica of Bucharest is offering a complete training program for nuclear industry but targeted courses for LFR technology need to be developed and implemented. Issues like physics of breeding, coolant analysis and behavior, targeted computer codes, core design and dynamics, safety still needs to be tackled

  1. Reactor physics challenges in GEN-IV reactor design

    International Nuclear Information System (INIS)

    Driscoll, Michael K.; Hejzlar, Pavel

    2005-01-01

    An overview of the reactor physics aspects of GENeration Four (GEN-IV) advanced reactors is presented, emphasizing how their special requirements for enhanced sustainability, safety and economics motivates consideration of features not thoroughly analyzed in the past. The resulting concept-specific requirements for better data and methods are surveyed, and some approaches and initiatives are suggested to meet the challenges faced by the international reactor physics community. No unresolvable impediments to successful development of any of the six major types of proposed reactors are identified, given appropriate and timely devotion of resources

  2. Reactor physics challenges in GEN-IV reactor design

    Energy Technology Data Exchange (ETDEWEB)

    Driscoll, Michael K.; Hejzlar, Pavel [Massachusetts Institute of Technology, MA (United States)

    2005-02-15

    An overview of the reactor physics aspects of GENeration Four (GEN-IV) advanced reactors is presented, emphasizing how their special requirements for enhanced sustainability, safety and economics motivates consideration of features not thoroughly analyzed in the past. The resulting concept-specific requirements for better data and methods are surveyed, and some approaches and initiatives are suggested to meet the challenges faced by the international reactor physics community. No unresolvable impediments to successful development of any of the six major types of proposed reactors are identified, given appropriate and timely devotion of resources.

  3. A Virtual Reality Framework to Optimize Design, Operation and Refueling of GEN-IV Reactors

    International Nuclear Information System (INIS)

    Rizwan-uddin; Nick Karancevic; Stefano Markidis; Joel Dixon; Cheng Luo; Jared Reynolds

    2008-01-01

    Many GEN-IV candidate designs are currently under investigation. Technical issues related to material, safety and economics are being addressed at research laboratories, industry and in academia. After safety, economic feasibility is likely to be the most important criterion in the success of GEN-IV design(s). Lessons learned from the designers and operators of GEN-II (and GEN-III) reactors must play a vital role in achieving both safety and economic feasibility goals

  4. A Virtual Reality Framework to Optimize Design, Operation and Refueling of GEN-IV Reactors.

    Energy Technology Data Exchange (ETDEWEB)

    Rizwan-uddin; Nick Karancevic; Stefano Markidis; Joel Dixon; Cheng Luo; Jared Reynolds

    2008-04-23

    many GEN-IV candidate designs are currently under investigation. Technical issues related to material, safety and economics are being addressed at research laboratories, industry and in academia. After safety, economic feasibility is likely to be the most important crterion in the success of GEN-IV design(s). Lessons learned from the designers and operators of GEN-II (and GEN-III) reactors must play a vital role in achieving both safety and economic feasibility goals.

  5. Safeguards Licensing Aspects of a Future Gen IV Test Facility - a Case Study

    International Nuclear Information System (INIS)

    Lindell, M. Aberg; Grape, S.; Hakansson, A.; Svaerd, S. Jacobsson

    2010-01-01

    The scope of this study covers safeguards licensing aspects of a possible future Gen IV demonstration facility. As a basis for the investigation, the facility was assumed to be located in Sweden, comprising a lead-cooled fast reactor and a reprocessing plant with fuel fabrication. The aim has been to identify safeguards requirements that may be set by the IAEA and the Swedish Radiation Safety Authority, and also to suggest how the safeguards system could be implemented in practice. The changed usage and handling of nuclear fuel, as compared to that of today, has been examined in order to determine how today's safeguards measures can be modified and extended to meet the needs of the demonstration facility. This work is part of GENIUS, the Swedish Gen IV research and development programme, which emphasizes lead-cooled fast reactors. (author)

  6. The status of proliferation resistance evaluation methodology development in GEN IV international forum

    International Nuclear Information System (INIS)

    Inoue, Naoko; Kawakubo, Yoko; Seya, Michio; Suzuki, Mitsutoshi; Kuno, Yusuke; Senzaki, Masao

    2010-01-01

    The Generation IV Nuclear Energy Systems International Forum (GIF) Proliferation Resistance and Physical Protection Working Group (PR and PP WG) was established in December 2002 in order to develop the PR and PP evaluation methodology for GEN IV nuclear energy systems. The methodology has been studied and established by international consensus. The PR and PP WG activities include development of the measures and metrics; establishment of the framework of PR and PP evaluation, the demonstration study using Example Sodium Fast Reactor (ESFR), which included the development of three evaluation approaches; the Case Study using ESFR and four kinds of threat scenarios; the joint study with GIF System Steering Committees (SSCs) of the six reactor design concepts; and the harmonization study with the IAEA's International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO). This paper reviews the status of GIF PR and PP studies and identifies the challenges and directions for applying the methodology to evaluate future nuclear energy systems in Japan. (author)

  7. Fuel research for subcritical and critical GEN-IV systems cooled by heavy liquid metal

    International Nuclear Information System (INIS)

    Sobolev, V.; Verwerft, M.

    2009-01-01

    The participation of the Belgian Nuclear Research Centre SCK-CEN in the worldwide GEN-IV research can be considered as an opportunity. Today's GEN-IV research at SCK-CEN is mainly driven by the interests of the project MYRRHA (Multipurpose hYbrid Research Reactor for High-tech Applications). The main goal of this project is to build at SCK-CEN in Mol a new generation fast spectrum, subcritical, research and materials testing reactor MYRRHA driven by a high-energy proton accelerator. This GEN-IV MTR is cooled by heavy liquid metal (Pb-Bi) and will be used for the ADS concept demonstration, testing and qualification of new fuels, transmutation targets and innovative materials. On the European scale, MYRRHA is integrated in the Euratom FP6 Integrated Project (IP) EUROTRANS (EUROpean research programme for TRANSmutation of high level nuclear waste in an accelerator driven system), as the small-scale experimental machine for transmutation demonstration called XT-ADS. Last but not least, this experimental facility will also demonstrate the technological feasibility of the LFR (Lead-cooled Fast Reactor) GEN-IV concept; in EU the LFR design studies are performed in the framework of the Euratom FP6 ELSY (European Lead-cooled SYstem) project, where SCK-CEN is a partner. Among the research needed to ensure a safe and reliable operation of the MYRRHA/XT ADS reactor, the development and qualification of fuel and cladding materials have been recognized as one of the main key issues to be addressed

  8. Generation IV nuclear reactors: Current status and future prospects

    International Nuclear Information System (INIS)

    Locatelli, Giorgio; Mancini, Mauro; Todeschini, Nicola

    2013-01-01

    Generation IV nuclear power plants (GEN IV NPPs) are supposed to become, in many countries, an important source of base load power in the middle–long term (2030–2050). Nowadays there are many designs of these NPPs but for political, strategic and economic reasons only few of them will be deployed. International literature proposes many papers and reports dealing with GEN IV NPPs, but there is an evident difference in the types and structures of the information and a general unbiased overview is missing. This paper fills the gap, presenting the state-of-the-art for GEN IV NPPs technologies (VHTR, SFR, SCWR, GFR, LFR and MSR) providing a comprehensive literature review of the different designs, discussing the major R and D challenges and comparing them with other advanced technologies available for the middle- and long-term energy market. The result of this research shows that the possible applications for GEN IV technologies are wider than current NPPs. The economics of some GEN IV NPPs is similar to actual NPPs but the “carbon cost” for fossil-fired power plants would increase the relative valuation. However, GEN IV NPPs still require substantial R and D effort, preventing short-term commercial adoption. - Highlights: • Generation IV reactors are the middle–long term technology for nuclear energy. • This paper provides an overview and a taxonomy for the designs under consideration. • R and D efforts are in the material, heat exchangers, power conversion unit and fuel. • The life cycle costs are competitive with other innovative technologies. • The hydrogen economy will foster the development of Generation IV reactors

  9. Development of Basic Key Technologies for Gen IV SFR

    International Nuclear Information System (INIS)

    Han, Do Hee; Kim, Young In; Won, Byung Chool

    2008-11-01

    Technical specifications such as power capacity, type of core, clad alloy, clad barrier material, number of loops, type of SG tube have been evaluated and a optimal design concept has been identified to satisfy the technology goals of Generation IV nuclear systems. The concept for breakeven design is featured by the heat capacity of 1,200 MWe, enrichment-separated core, 2-loop, double-walled SG tube, and a long-life sensor system for in-service inspection

  10. Environmental sensitivity studies for Gen-IV roadmap DUPIC scenario

    International Nuclear Information System (INIS)

    Jeong, Chang Joon

    2004-03-01

    The environmental effect of the DUPIC (Direct Use of Spent PWR Fuel in CANDU Reactors) fuel cycle, which is considered as one of the partial recycle scenario in Gen-IV roadmap, has been analyzed by using the dynamic analysis method. Through the parametric calculations for the DUPIC fuel cycle deployment time and the fraction of the DUPIC reactors, the environmental effects of the fuel cycle for important parameters such as the amount of spent fuel and the combined amounts of plutonium and minor actinides were estimated and compared to those of the once-through LWR fuel cycle. The results of the sensitivity calculations showed that an early deployment of the DUPIC fuel cycle with a high DUPIC reactor fraction can reduce the accumulation of spent fuel by up to 40%. More important is the associated reduction in the combined amount of plutonium and minor actinides, which may reduce the key repository parameter (long term decay heat). Therefore it is expected that favorable environmental effects will be the outcome of the implementation of the DUPIC fuel cycle

  11. Overall system description and safety characteristics of Prototype Gen IV Sodium Cooled Fast Reactor in Korea

    International Nuclear Information System (INIS)

    Yoo, Jae Woon; Chang, Jin Wook; Lim, Jae Yong; Cheon, Jin Sik; Lee, Tae Ho; Kim, Sung Kyun; Lee, Kwi Lim; Joo, Hyung Kook

    2016-01-01

    The Prototype Gen IV sodium cooled fast reactor (PGSFR) has been developed for the last 4 years, fulfilling the technology demonstration of the burning capability of transuranic elements included in light water reactor spent nuclear fuel. The PGSFR design has been focused on the robustness of safety systems by enhancing inherent safety characteristics of metal fuel and strengthening passive safety features using natural circulation and thermal expansion. The preliminary safety information document as a major outcome of the first design phase of PGSFR development was issued at the end of 2015. The project entered the second design phase at the beginning of 2016. This paper summarizes the overall structures, systems, and components of nuclear steam supply system and safety characteristics of the PGSFR. The research and development activities to demonstrate the safety performance are also briefly introduced in the paper

  12. Overall System Description and Safety Characteristics of Prototype Gen IV Sodium Cooled Fast Reactor in Korea

    Directory of Open Access Journals (Sweden)

    Jaewoon Yoo

    2016-10-01

    Full Text Available The Prototype Gen IV sodium cooled fast reactor (PGSFR has been developed for the last 4 years, fulfilling the technology demonstration of the burning capability of transuranic elements included in light water reactor spent nuclear fuel. The PGSFR design has been focused on the robustness of safety systems by enhancing inherent safety characteristics of metal fuel and strengthening passive safety features using natural circulation and thermal expansion. The preliminary safety information document as a major outcome of the first design phase of PGSFR development was issued at the end of 2015. The project entered the second design phase at the beginning of 2016. This paper summarizes the overall structures, systems, and components of nuclear steam supply system and safety characteristics of the PGSFR. The research and development activities to demonstrate the safety performance are also briefly introduced in the paper.

  13. Safety Design Criteria (SDC) for Gen-IV Sodium-cooled Fast Reactor

    International Nuclear Information System (INIS)

    Nakai, Ryodai

    2013-01-01

    SDC Development Background & Objectives: • Safety Design Criteria (SDC) Development for Gen-IV SFR: – Proposed at the GIF Policy Group (PG) meeting in October 2010 –SDC “harmonization” is increasingly important for: • Realization of enhanced safety designs meeting to Gen-IV safety goals and safety approach common to SFR systems; • Preparation for the forthcoming licensing in the near future; • Because Gen-IV SFR are progressing into conceptual design stage. • The SDC is the Reference criteria: – Of the designs of safety-related Structures, Systems & Components that are specific to the SFR system; – For clarifying the requisites systematically & comprehensively; – When the technology developers apply the basic safety approach and use the codes & standards for conceptual design of the Gen-IV SFR system

  14. The generation IV nuclear reactor systems - Energy of future

    International Nuclear Information System (INIS)

    Ohai, Dumitru; Jianu, Adrian

    2006-01-01

    Ten nations joined within the Generation IV International Forum (GIF), agreeing on a framework for international cooperation in research. Their goal is to develop future-generation nuclear energy systems that can be licensed, constructed, and operated in an economically competitive way while addressing the issues of safety, proliferation, and other public perception concerns. The objective is for the Gen IV systems to be available for deployment by 2030. Using more than 100 nuclear experts from its 10 member nations, the GIF has developed a Gen IV Technology Roadmap to guide the research and development of the world's most advanced, efficient and safe nuclear power systems. The Gen IV Technology Roadmap calls for extensive research and development of six different potential future reactor systems. These include water-cooled, gas-cooled, liquid metal-cooled and nonclassical systems. One or more of these reactor systems will provide the best combination of safety, reliability, efficiency and proliferation resistance at a competitive cost. The main goals for the Gen IV Nuclear Energy Systems are: - Provide sustainable energy generation that meets clean air objectives and promotes long-term availability of systems and effective fuel use for worldwide energy production; - Minimize and manage their nuclear waste and noticeably reduce the long-term stewardship burden in the future, improving the protection of public health and the environment; - Increase the assurance that these reactors are very unattractive and the least desirable route for diversion or theft of weapons-usable materials, and provide increased protection against acts of terrorism; - Have a clear life-cycle cost advantage over other energy sources; - Have a level of financial risk comparable to other energy projects; - Excel in safety and reliability; - Have a low likelihood and degree of reactor core damage. (authors)

  15. Nordic Nuclear Materials Forum for Generation IV Reactors

    International Nuclear Information System (INIS)

    Anghel, C.; Penttilae, S.

    2010-03-01

    A network for material issues for Generation IV nuclear power has been initiated within the Nordic countries. The objectives of the Generation IV Nordic Nuclear Materials Forum (NOMAGE4) are to put the basis of a sustainable forum for Gen IV issues, especially focussing on fuels, cladding, structural materials and coolant interaction. Other issues include reactor physics, dynamics and diagnostics, core and fuel design. The present report summarizes the work performed during the year 2009. The efforts made include identification of organisations involved in Gen IV issues in the Nordic countries, update of the forum website, http://www.studsvik.se/GenerationIV, and investigation of capabilities for research within the area of Gen IV. Within the NOMAGE4 project a seminar on Generation IV Nuclear Energy Systems has been organized during 15-16th of October 2009. The aim of the seminar was to provide a forum for exchange of information, discussion on future research needs and networking of experts on Generation IV reactor concepts. As an outcome of the NOMAGE4, a few collaboration project proposals have been prepared/planned in 2009. The network was welcomed by the European Commission and was mentioned as an exemplary network with representatives from industries, universities, power companies and research institutes. NOMAGE4 has been invited to participate to the 'European Energy Research Alliance, EERA, workshop for nuclear structural materials' http://www.eera-set.eu/index.php?index=41 as external observers. Future plans include a new Nordic application for continuation of NOMAGE4 network. (author)

  16. Nordic Nuclear Materials Forum for Generation IV Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Anghel, C. (Studsvik Nuclear AB, Nykoeping (Sweden)); Penttilae, S. (Technical Research Centre of Finland, VTT (Finland))

    2010-03-15

    A network for material issues for Generation IV nuclear power has been initiated within the Nordic countries. The objectives of the Generation IV Nordic Nuclear Materials Forum (NOMAGE4) are to put the basis of a sustainable forum for Gen IV issues, especially focussing on fuels, cladding, structural materials and coolant interaction. Other issues include reactor physics, dynamics and diagnostics, core and fuel design. The present report summarizes the work performed during the year 2009. The efforts made include identification of organisations involved in Gen IV issues in the Nordic countries, update of the forum website, http://www.studsvik.se/GenerationIV, and investigation of capabilities for research within the area of Gen IV. Within the NOMAGE4 project a seminar on Generation IV Nuclear Energy Systems has been organized during 15-16th of October 2009. The aim of the seminar was to provide a forum for exchange of information, discussion on future research needs and networking of experts on Generation IV reactor concepts. As an outcome of the NOMAGE4, a few collaboration project proposals have been prepared/planned in 2009. The network was welcomed by the European Commission and was mentioned as an exemplary network with representatives from industries, universities, power companies and research institutes. NOMAGE4 has been invited to participate to the 'European Energy Research Alliance, EERA, workshop for nuclear structural materials' http://www.eera-set.eu/index.php?index=41 as external observers. Future plans include a new Nordic application for continuation of NOMAGE4 network. (author)

  17. European project SARGEN IV: safety approach and assessment of GEN IV reactors

    International Nuclear Information System (INIS)

    Ammirabile, L.

    2013-01-01

    • SARGEN I V has elaborated a proposal for the harmonization of safety assessment practices for GEN IV NPP. • An overall reinforcement of DiD is expected for GEN I V NPP, including improved independence between all levels of DiD. • An inherent approach should reinforce the fulfillment of fundamental safety functions e.g. the consequences for some situations should be reduced and the grace periods should be extended. For the same reason, the use of passive systems can be envisaged. • The need of complementary and integrated deterministic and probabilistic approaches is reiterated. • Methodologies: Some of them are not yet applied. • Assessment of hazards would be a challenging aspect of next generation of NPP safety assessment and should be improved, which is confirmed by the first insights of Fukushima Daiichi TEPCO reactors accidents. • Provisions to cope with extreme events notably to improve the grace period before cliff-edge effects and thus allowing back-up measures to be implemented have to be defined and should be considered as hardened equipments

  18. Gen IV International Forum - GIF, 2010 Annual Report

    International Nuclear Information System (INIS)

    Anon.

    2011-01-01

    The Generation IV International Forum (GIF), created in 2000 to foster international collaboration at a detailed level of actual R and D, is a cooperative international endeavor, organized to develop the research necessary to test the feasibility and performance capabilities of fourth generation nuclear systems, with the goal of making such systems deployable in large numbers around 2030. Since its beginning, GIF members stated the following goals for the fourth generation of nuclear power plants when compared to previous generations: a) improve sustainability (including effective fuel utilization and minimization of waste); b) improve economics (competitiveness with respect to other energy sources); c) improve safety and reliability (e.g. no need for offsite emergency response); and d) improve proliferation resistance and physical protection. After an in-depth analysis of the different available concepts, whatever their level of development, the Forum selected six concepts as the most promising, and decided to focus R and D on these systems: - the very-high-temperature reactor (VHTR); - the sodium-cooled fast reactor (SFR); - the supercritical-water-cooled reactor (SCWR); - the gas-cooled fast reactor (GFR); - the lead-cooled fast reactor (LFR); - the molten salt reactor (MSR). Active members of the GIF are Canada, Euratom, France, Japan, People's Republic of China, Republic of Korea, Republic of South Africa, Russian Federation, Switzerland and the United States. Altogether, they represent around 90% of the world installed nuclear capacity for producing electricity, and all key technology holders. The forum is led by the policy group, where all members are represented, and currently chaired by Japan since December 2009, assisted by vice-chairs from France and United States. The year 2010 has seen some important achievements and decisions regarding these six systems. For example, two sodium-cooled fast reactors (re)started this year: Monju in Japan restarted after

  19. Level II Probabilistic Safety Analysis Methodology for the Application to GEN-IV Sodium-cooled Fast Reactor

    International Nuclear Information System (INIS)

    Park, S. Y.; Kim, T. W.; Han, S. H.; Jeong, H. Y.

    2010-03-01

    The Korea Atomic Energy Research Institute (KAERI) has been developing liquid metal reactor (LMR) design technologies under a National Nuclear R and D Program. Nevertheless, there is no experience of the probabilistic safety assessment (PSA) domestically for a fast reactor with the metal fuel. Therefore, the objective of this study is to establish the methodologies of risk assessment for the reference design of GEN-IV sodium fast reactor (SFR). An applicability of the PSA methodology of U. S. NRC and PRISM plant to the domestic GEN-IV SFR has been studied. The study contains a plant damage state analysis, a containment event tree analysis, and a source-term release category binning process

  20. GIF (Gen-IV International Forum) Symposium 2009. Proceedings

    International Nuclear Information System (INIS)

    2009-01-01

    The objective of this symposium is to give a well documented state of the art of the initiative and to report and discuss the most significant technical progress and evolution in the different areas during these last ten years. Another significant objective is to provide a forum for an open and hopefully lively discussion of the perspectives, priorities and challenges for the next few years, accounting for a rapidly evolving environment. The symposium has been organized into three sessions that have dealt with the following issues: -) Generation IV International Forum (GIF): 10 years of achievements and the path forward, -) Methodology Overviews and Focus on Applications, -) Very High Temperature Reactor (VHTR), -) Gas-cooled Fast Reactor (GFR), -) Super-Critical Water-cooled Reactor (SCWR), -) Lead-cooled Fast Reactor (LFR), -) Molten Salt Reactor (MSR), -) Sodium-cooled Fast Reactor (SFR), -) International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO) and its potential synergy with GIF, and -) GIF priority objectives for the next 5 years

  1. Development of basic key technologies for Gen IV SFR

    International Nuclear Information System (INIS)

    Kim, Yeongil; Kim, Sungoh; Choi, Sukgi

    2012-04-01

    The advanced concepts, for the breakeven reactor(1,200MWe) and TRU burner(600MWe), were defined to satisfy the technology goals of Generation IV nuclear systems. Based on the advanced design concepts, a conceptual design of the demonstration SFR has been developed using the available licensing technology. The conceptual core design has been developed for the TRU burner in which an initial core is fueled with less than 20wt% enriched U235, and finally transformed to a self-recycled TRU core. The passive decay heat removal circuit ensuring reactor safety even in case of loss of emergency power has been developed and minimization of a reactor vessel and simplification of reactor internals have been conducted in the conceptual design. For development of advanced technologies, control logics for various power levels and the optimal design concept of heat exchanger applicable to supercritical CO 2 Brayton cycle as an energy conversion system was developed. A novel under-sodium waveguide sensor and a prototype under-sodium inspection system have been developed for under-sodium viewing of in-vessel structures submerged in an opaque liquid sodium. The fabrication technology of fuel slugs using the advanced fuel slug casting system was developed, and U-Zr alloy fuel rods were fabricated and examined. And a HT 9 cladding tube was manufactured using the developed cladding tube fabrication technology. For development of basic technologies, the cross section adjustment code ATCROSS and the MATRA-LMR code with HCFs have been developed to reduce core design uncertainties. The SIE ASME-NH computer program to evaluate high temperature structural design for 60 years design life, and the safety analysis code MARS-LMR with thermal-hydraulic and reactivity feedback models have been developed and validated. In addition, the sodium impurity measurement and control technology, the sodium water reaction event propagation model to predict the sodium leak propagation in a steam generator, and

  2. Overview of Generation IV (Gen IV) Reactor Designs - Safety and Radiological Protection Considerations

    International Nuclear Information System (INIS)

    Baudrand, Olivier; Blanc, Daniel; Ivanov, Evgeny; Bonneville, Herve; Clement, Bernard; Kissane, Martin; Meignen, Renaud; Monhardt, Daniel; Nicaise, Gregory; Bourgois, Thierry; Bruna, Giovanni; Hache, Georges; Repussard, Jacques

    2012-01-01

    The purpose of this document is to provide an updated overview of specific safety and radiological protection issues for all the reactor concepts adopted by the GIF (Generation IV International Forum), independent of their advantages or disadvantages in terms of resource optimization or long-lived-waste reduction. In particular, this new document attempts to bring out the advantages and disadvantages of each concept in terms of safety, taking into account the Western European Nuclear Regulators' Association (WENRA) statement concerning safety objectives for new nuclear power plants. Using an identical framework for each reactor concept (sodium-cooled fast reactors or SFR, high / very-high temperature helium-cooled reactors of V/HTR, gas-cooled fast reactors or GFR, lead-or lead / bismuth-cooled fast reactors or LFR, molten salt reactors or MSR, and supercritical-water-cooled reactors or SCWR), this summary report provides some general conclusions regarding their safety and radiological protection issues, inspired by WENRA's safety objectives and on the basis of available information. Initial lessons drawn from the events at the Fukushima-Daiichi nuclear power plant in March 2011 have also been taken into account in IRSN's analysis of each reactor concept

  3. Generation-IV nuclear reactors, SFR concept

    International Nuclear Information System (INIS)

    Dufour, P.

    2010-01-01

    In this presentation author deals with development of sodium-cooled fast reactors and lead-cooled fast reactors. He concluded that: - SFR is a proved concept that has never achieved industrial deployment; - The GEN IV objectives need to reconsider the design of both the core and the reactor design : innovations are being analysed; Future design will benefit from considerable feedback of design, licensing, construction and operation of PX, SPX, etc.

  4. Thermal stability study for candidate stainless steels of GEN IV reactors

    International Nuclear Information System (INIS)

    Simeg Veternikova, J.; Degmova, J.; Pekarcikova, M.; Simko, F.; Petriska, M.; Skarba, M.; Mikula, P.; Pupala, M.

    2016-01-01

    Highlights: • Thermal resistance of advanced stainless steels were observed at 1000 °C. • GEN IV candidate steels were confronted to classic AISI steels. • ODS AISI 316 has weaker thermal resistance than classic AISI steel. • Ferritic ODS steels and NF 709 has better thermal resistance than AISI steels. - Abstract: Candidate stainless steels for GEN IV reactors were investigated in term of thermal and corrosion stability at high temperatures. New austenitic steel (NF 709), austenitic ODS steel (ODS 316) and two ferritic ODS steels (MA 956 and MA 957) were exposed to around 1000 °C in inert argon atmosphere at pressure of ∼8 MPa. The steels were further studied in a light of vacancy defects presence by positron annihilation spectroscopy and their thermal resistance was confronted to classic AISI steels. The thermal strain supported a creation of oxide layers observed by scanning electron microscopy (SEM).

  5. Thermal stability study for candidate stainless steels of GEN IV reactors

    Energy Technology Data Exchange (ETDEWEB)

    Simeg Veternikova, J., E-mail: jana.veternikova@stuba.sk [Institute of Nuclear and Physical Engineering, Faculty of Electrical and Information Technology, Slovak University of Technology, Ilkovicova 3, 812 19 Bratislava (Slovakia); Degmova, J. [Institute of Nuclear and Physical Engineering, Faculty of Electrical and Information Technology, Slovak University of Technology, Ilkovicova 3, 812 19 Bratislava (Slovakia); Pekarcikova, M. [Institute of Materials Science, Faculty of Materials Science and Technology, Slovak University of Technology, Paulinska 16, 917 24 Trnava (Slovakia); Simko, F. [Department of Molten Salts, Institute of Inorganic Chemistry, Slovak Academy of Sciences, Dubravska cesta 9, 845 36 Bratislava (Slovakia); Petriska, M. [Institute of Nuclear and Physical Engineering, Faculty of Electrical and Information Technology, Slovak University of Technology, Ilkovicova 3, 812 19 Bratislava (Slovakia); Skarba, M. [Slovak University of Technology, Vazovova 5, 812 43 Bratislava (Slovakia); Mikula, P. [Institute of Nuclear and Physical Engineering, Faculty of Electrical and Information Technology, Slovak University of Technology, Ilkovicova 3, 812 19 Bratislava (Slovakia); Pupala, M. [Department of Molten Salts, Institute of Inorganic Chemistry, Slovak Academy of Sciences, Dubravska cesta 9, 845 36 Bratislava (Slovakia)

    2016-11-30

    Highlights: • Thermal resistance of advanced stainless steels were observed at 1000 °C. • GEN IV candidate steels were confronted to classic AISI steels. • ODS AISI 316 has weaker thermal resistance than classic AISI steel. • Ferritic ODS steels and NF 709 has better thermal resistance than AISI steels. - Abstract: Candidate stainless steels for GEN IV reactors were investigated in term of thermal and corrosion stability at high temperatures. New austenitic steel (NF 709), austenitic ODS steel (ODS 316) and two ferritic ODS steels (MA 956 and MA 957) were exposed to around 1000 °C in inert argon atmosphere at pressure of ∼8 MPa. The steels were further studied in a light of vacancy defects presence by positron annihilation spectroscopy and their thermal resistance was confronted to classic AISI steels. The thermal strain supported a creation of oxide layers observed by scanning electron microscopy (SEM).

  6. The Atalante facility at CEA/Marcoule: towards Gen IV systems fuel cycle

    Energy Technology Data Exchange (ETDEWEB)

    Bordier, Gilles; Warin, Dominique; Masson, Michel [CEA/Marcoule Direction, BP 17171 - 30207 - Bagnols-sur-Ceze Cedex (France)

    2008-07-01

    The Atalante facility is a complete set of 18 hot labs and 9 shielded cells devoted to the research and development on fuel cycle. The activities correspond to 4 major sectors of nuclear research: -) to support the operation of actual reprocessing plants with the aim of adapting the head of the process to the increase of the spend fuel burn-up and to different types of new burnt fuels to be reprocessed (including MOX, USi or UMo fuels); -) to develop the COEX{sup TM} process that jointly manages uranium and plutonium from the dissolution of spent fuel to the production of UPuO{sub 2} powder and the fabrication of MOX fuel pellets; -) to prepare the recycling of minor actinides (MA) by partitioning or by grouped actinide extraction, and by MA bearing fuel fabrication; -) to study the long term behavior of high level waste conditioning matrices and especially self irradiation and leaching of vitrified waste. The first hot lab of Atalante was operated in 1992, the process shielded cell (CBP) in 2003 and the last LN1 lab in 2005, while at the same time a large scale demonstration test on the DIAMEX-SANEX MA partitioning process was performed. Now some new challenges involve further necessary evolutions of the facility. Some are related to safety assessment and operating flexibility; the major evolutions will come from new scientific goals and research programs. Furthermore, minor actinides materials irradiation tests in fast reactors will be prepared in the framework of a large international cooperation (GACID program) and need the production of significant amounts of MA bearing mixed U-Pu oxide compounds in new hot labs and shielded cells equipment. The major new research tools are presented and we highlight how Atalante is a unique facility which brings a real opportunity to reinforce the European and international scientific cooperation in order to prepare the next Gen IV fuel cycle. (authors)

  7. The Atalante facility at CEA/Marcoule: towards Gen IV systems fuel cycle

    International Nuclear Information System (INIS)

    Bordier, Gilles; Warin, Dominique; Masson, Michel

    2008-01-01

    The Atalante facility is a complete set of 18 hot labs and 9 shielded cells devoted to the research and development on fuel cycle. The activities correspond to 4 major sectors of nuclear research: -) to support the operation of actual reprocessing plants with the aim of adapting the head of the process to the increase of the spend fuel burn-up and to different types of new burnt fuels to be reprocessed (including MOX, USi or UMo fuels); -) to develop the COEX TM process that jointly manages uranium and plutonium from the dissolution of spent fuel to the production of UPuO 2 powder and the fabrication of MOX fuel pellets; -) to prepare the recycling of minor actinides (MA) by partitioning or by grouped actinide extraction, and by MA bearing fuel fabrication; -) to study the long term behavior of high level waste conditioning matrices and especially self irradiation and leaching of vitrified waste. The first hot lab of Atalante was operated in 1992, the process shielded cell (CBP) in 2003 and the last LN1 lab in 2005, while at the same time a large scale demonstration test on the DIAMEX-SANEX MA partitioning process was performed. Now some new challenges involve further necessary evolutions of the facility. Some are related to safety assessment and operating flexibility; the major evolutions will come from new scientific goals and research programs. Furthermore, minor actinides materials irradiation tests in fast reactors will be prepared in the framework of a large international cooperation (GACID program) and need the production of significant amounts of MA bearing mixed U-Pu oxide compounds in new hot labs and shielded cells equipment. The major new research tools are presented and we highlight how Atalante is a unique facility which brings a real opportunity to reinforce the European and international scientific cooperation in order to prepare the next Gen IV fuel cycle. (authors)

  8. Gen IV Materials Handbook Functionalities and Operation (2B) Handbook Version 2.0

    International Nuclear Information System (INIS)

    Ren, Weiju

    2011-01-01

    This document is prepared for navigation and operation of the Gen IV Materials Handbook, with architecture description and new user access initiation instructions. Development rationale and history of the Handbook is summarized. The major development aspects, architecture, and design principles of the Handbook are briefly introduced to provide an overview of its past evolution and future prospects. Detailed instructions are given with examples for navigating the constructed Handbook components and using the main functionalities. Procedures are provided in a step-by-step fashion for Data Upload Managers to upload reports and data files, as well as for new users to initiate Handbook access.

  9. Gen IV Materials Handbook Functionalities and Operation (4A) Handbook Version 4.0

    Energy Technology Data Exchange (ETDEWEB)

    Ren, Weiju [ORNL

    2013-09-01

    This document is prepared for navigation and operation of the Gen IV Materials Handbook, with architecture description and new user access initiation instructions. Development rationale and history of the Handbook is summarized. The major development aspects, architecture, and design principles of the Handbook are briefly introduced to provide an overview of its past evolution and future prospects. Detailed instructions are given with examples for navigating the constructed Handbook components and using the main functionalities. Procedures are provided in a step-by-step fashion for Data Upload Managers to upload reports and data files, as well as for new users to initiate Handbook access.

  10. Gen IV Materials Handbook Functionalities and Operation (2B) Handbook Version 2.0

    Energy Technology Data Exchange (ETDEWEB)

    Ren, Weiju [ORNL

    2011-08-01

    This document is prepared for navigation and operation of the Gen IV Materials Handbook, with architecture description and new user access initiation instructions. Development rationale and history of the Handbook is summarized. The major development aspects, architecture, and design principles of the Handbook are briefly introduced to provide an overview of its past evolution and future prospects. Detailed instructions are given with examples for navigating the constructed Handbook components and using the main functionalities. Procedures are provided in a step-by-step fashion for Data Upload Managers to upload reports and data files, as well as for new users to initiate Handbook access.

  11. Study on high temperature design methodology of heat-resistant materials for GEN-IV systems

    Energy Technology Data Exchange (ETDEWEB)

    Ryu, Woo Seog; Kim, D. W.; Kim, S. H.; Kim, W. G.; Kim, J. H.; Park, D. G.; Yoon, J. H.; Lee, H. Y.; Hing, J. H

    2005-08-15

    Analysis of the existing high temperature design and assessment codes such as US(ASME-NH,Draft Code Case for Alloy 617), France(RCC-MR), UK(R5), Japan(BDS/DDS/FDS) for Gen IV reactor structure has been carried out. In addition the scope and fields for research and development is needed in the future have been defined. For assessing the high temperature creep cracks, time dependent fracture mechanics (TDFM) parameters of the C and Ct were analyzed. The creep propagation data were obtained from the creep crack growth tests for type 316LN stainless steels, and creep crack growth testing machine for Gen-IV system up to 950 .deg. C was set up. Damage mechanism and causes for creep-fatigue were investigated. The difference between prediction creep-fatigue life and experimental life were investigated. Material properties for analysis creep-fatigue damage were recommended. The assessment procedure (Draft) on creep-fatigue crack initiation has been developed based on the technical appendix A16 of French RCC-MR code. Ultrasonic wave signal against creep ruptured specimens of type 316LN stainless steel was obtained. It was identified that creep damage can be evaluated by ultrasonic method. The NDT techniques evaluated include Barkhausen noise, magnetic hysteresis parameters, positron annihilation, X-ray diffraction and small angle neutron scattering. Experimental procedure and evaluation method of material integrity were developed through the fracture toughness test of Cr-Mo steel.

  12. Generation IV nuclear plant design strategies

    International Nuclear Information System (INIS)

    Altin, V.

    2007-01-01

    In this presentation Generation IV nuclear reactor design criteria are examined under the light of known nuclear properties of fissile and fertile nuclei. Their conflicting nature is elucidated along with the resulting inevitability of a multitude of designs. The designs selected as candidates for further development are evaluated with respect to their potential to serve the different design criteria, thereby revealing their more difficult aspects of realization and the strong research challenges lying ahead

  13. Safety assessment for Generation IV nuclear systems

    International Nuclear Information System (INIS)

    Leahy, T.J.

    2012-01-01

    The Generation IV International Forum (GIF) Risk and Safety Working Group (RSWG) was created to develop an effective approach for the safety of Generation IV advanced nuclear energy systems. Recent RSWG work has focused on the definition of an integrated safety assessment methodology (ISAM) for evaluating the safety of Generation IV systems. ISAM is an integrated 'tool-kit' consisting of 5 analytical techniques that are available and matched to appropriate stages of Generation IV system concept development: 1) qualitative safety features review - QSR, 2) phenomena identification and ranking table - PIRT, 3) objective provision tree - OPT, 4) deterministic and phenomenological analyses - DPA, and 5) probabilistic safety analysis - PSA. The integrated methodology is intended to yield safety-related insights that help actively drive the evolving design throughout the technology development cycle, potentially resulting in enhanced safety, reduced costs, and shortened development time

  14. A Study on planning of promotion for international collaborative development of Generation IV Nuclear Energy Systems

    International Nuclear Information System (INIS)

    Hee, Chang Moon; Yang, M. S.; Ha, J. J.

    2006-06-01

    Korea has participated in the international collaboration programs for the development of future nuclear energy systems driven by the countries holding advanced nuclear technology and Korea and U. S. have cooperated in the INERI. This study is mainly at developing the plan for participation in the collaborative development of the Gen IV, searching the participation strategy for INERI and the INPRO, and the international cooperation in these programs. Contents and scope of the study for successful achievement are as follows; - Investigation and analysis of international and domestic trends related to advanced nuclear technologies - Development of the plan for collaborative development of the Gen IV and conducting the international cooperation activities - Support for the activities related to I-NERI between Korea and U. S. and conducting the international cooperation - International cooperation activities for the INPRO This study can be useful for planning the research plan and setting up of the strategy of integrating the results of the international collaboration and the domestic R and D results by combining the Gen IV and the domestic R and D in the field of future nuclear technology. Furthermore, this study can contribute to establishing the effective foundation and broadening the cooperation activities not only with the advanced countries for acquisition of the advanced technologies but also with the developing countries for the export of the domestic nuclear energy systems

  15. A Qualitative Assessment of Diversion Scenarios for a GEN IV Example Sodium Fast Reactor Using the GEN IV PR and PP Methodology

    Energy Technology Data Exchange (ETDEWEB)

    Zentner, M.D.; Coles, G.A. [PNNL, P.O. Box 999, 902 Battelle Boulvard, Richland, WA 99336 (United States); Therios, I.U. [Argonne National Lab. - ANL (United States)

    2009-06-15

    An experts working group was created in 2002 by The Generation IV International Forum for the purpose of developing an internationally accepted methodology for assessing the proliferation resistance of a nuclear energy system (NES) and its individual elements. A two year case study was performed by the working group using this methodology to assess the proliferation resistance of a hypothetical NES called the Example Sodium Fast Reactor (ESFR). This work demonstrates how the PR and PP methodology can be used to provide important information to designers at various levels of details, including pre-conceptual design stage. The study analyzes the response of the ESFR entire nuclear energy system to different proliferation and theft strategies. The challenges considered comprise concealed diversion, concealed misuse and abrogation strategies. This paper describes the work done in performing a qualitative assessment of potential concealed diversion scenarios from the ESFR, and includes an evaluation of the potential effect of changes in the conversion ratio on diversion strategies. (authors)

  16. Cycle for innovative nuclear Gen 4. systems=

    International Nuclear Information System (INIS)

    2004-01-01

    In the framework of the development of nuclear systems of the 4. generation, the preliminary and schematic reprocessing goals are a cleaning of fission products without a priori separation of the different actinides. The objective of the workshop is to exchange information about the potential efficiency of innovative fuel processing treatments in order to evaluate the impact of impurities on the design of the fuel during its re-fabrication and re-introduction inside the reactor, and on the materials and systems. This document gathers the slides of the 18 presentations given at this workshop: 1 - from the PWR fuel to the closed cycle fast spectrum concepts of generation 4 systems (P. Anzieu, F. Carre, Ph. Brossard, M. Delpech); 2 - the double strata scenarios: objectives and characteristics (S. David and F. Varaine); 3 - why a molten salts thorium file (D. Heuer); 4 - the common 'molten salts' research program of the CNRS (D. Heuer, S. Sanchez); 5 - the hydro-metallurgical reprocessing, the knowledge gained and the statuses of the 5. PCRD, synthesis of the OECD works (C. Madic); 6 - pyro-chemistry: Pyropep status (H. Boussier); 7 - technological bolts identified during the Most project of the 5. PCRD (C. Renault, Ch. Le Brun, M. Delpech and C. Garzenne); 8 - the molten salt reactor concept and its reprocessing options, expected efficiencies (L. Mathieu); 9 - methodology of evaluation of pyro-chemical fuel reprocessing schemes (H. Boussier); 10 - molten salt reactor, design-aided tools for the reactor and the reprocessing plant (O. Gastaldi, E. Walle, O. Koberl, D. Lecarpentier); 11 - status of CEA's prospective studies for the front-end of the fuel reprocessing process/dry ways (S. Bourg); 12 - results of activity coefficient measurements in liquid metals (J. Finne, E. Walle, G. Picard, S. Sanchez and O. Conocar); 13 - potentialities of electrolytic separation and liquid-liquid extraction processes (molten salts/molten metal) for the multi-recycling of actinides (J

  17. Decay Heat Removal in GEN IV Gas-Cooled Fast Reactors

    International Nuclear Information System (INIS)

    Lap-Yan, C.; Wie, T. Y. C.

    2009-01-01

    The safety goal of the current designs of advanced high-temperature thermal gas-cooled reactors (HTRs) is that no core meltdown would occur in a depressurization event with a combination of concurrent safety system failures. This study focused on the analysis of passive decay heat removal (DHR) in a GEN IV direct-cycle gas-cooled fast reactor (GFR) which is based on the technology developments of the HTRs. Given the different criteria and design characteristics of the GFR, an approach different from that taken for the HTRs for passive DHR would have to be explored. Different design options based on maintaining core flow were evaluated by performing transient analysis of a depressurization accident using the system code RELAP5-3D. The study also reviewed the conceptual design of autonomous systems for shutdown decay heat removal and recommends that future work in this area should be focused on the potential for Brayton cycle DHRs.

  18. Environmental sensitivity studies for Gen-IV roadmap fast reactor scenario

    International Nuclear Information System (INIS)

    Jeong, Chang Joon

    2004-03-01

    The environmental effect of the self-sufficient fast reactor scenario, which is considered as one of the full fissile plutonium and transuranic recycle scenario in Gen-IV roadmap, has been analyzed by using the dynamic analysis method. Through the parametric calculations for the fast reactor deployment time and capacity, the environmental effects of the fuel cycle for important parameters such as the amount of spent fuel and the combined amounts of plutonium and minor actinides were estimated and compared to those of the once-through LWR fuel cycle. The results of the sensitivity calculations showed that an early deployment of the fast reactor with a high capacity can reduce the accumulation of spent fuel by up to 37%. Furthermore, the recycling of plutonium and minor actinides can reduce the key repository parameter (long term decay heat). Therefore the favorable environmental effects can be expected with the implementation of the symbiotic fast reactor scenario

  19. A preliminary safety analysis for the prototype Gen IV Sodium-Cooled Fast Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Kwi Lim; Ha, Kwi Seok; Jeong, Jae Ho; Choi, Chi Woong; Jeong, Tae Kyeong; Ahn, Sang June; Lee, Seung Won; Chang, Won Pyo; Kang, Seok Hun; Yoo, Jae Woon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2016-10-15

    Korea Atomic Energy Research Institute has been developing a pool-type sodium-cooled fast reactor of the Prototype Gen-IV Sodium-cooled Fast Reactor (PGSFR). To assess the effectiveness of the inherent safety features of the PGSFR, the system transients during design basis accidents and design extended conditions are analyzed with MARS-LMR and the subchannel blockage events are analyzed with MATRA-LMR-FB. In addition, the in-vessel source term is calculated based on the super-safe, small, and simple reactor methodology. The results show that the PGSFR meets safety acceptance criteria with a sufficient margin during the events and keeps accidents from deteriorating into more severe accidents.

  20. Development of generation IV nuclear energy systems

    International Nuclear Information System (INIS)

    Matsui, Kazuaki; Oka, Yoshiaki; Ogawa, Masuro; Ichimiya, Masakazu; Noda, Hiroshi

    2003-01-01

    The fifth 'Generation IV International Forum (GIF), Policy Group Meetings' was held at the Zen-Nikku Hotel in Tokyo, on September 19-20, 2002, under participations of Abraham, Secretary of DOE in U.S.A., Columbani, Secretary of CEA in France, Fujiie, Chairman of CAE in Japan, Kano, Parliamental Minister of MIS in Japan, and so on. Ten nations entering GIF (Argentina, Brazil, Canada, France, Japan, Korea, South Africa, Switzerland, U.K., and U.S.A.) selected six next generation nuclear energy concepts for objects of international cooperative research and development aiming at its practice by 2030. These concepts applicable to not only power generation, but also hydrogen production, sea water purification, and so on, are sodium liquid metal cooled reactor (Japan), high temperature gas cooled reactor (France), Super-critical pressure water cooled reactor (SCWR: Canada), Lead metal cooled reactor (Switzerland), Gas cooled fast reactor (U.S.A.), and molten salts reactor. On the generation IV nuclear reactor systems aiming to further upgrade their sustainability, safety, economical efficiency, and nuclear non proliferation, the 'Plans on Technical Development' (Road-map) to decide priority of their R and Ds has been cooperatively discussed under frameworks of international research cooperation by the GIF members nations. Here were shared descriptions on nuclear fuel cycle as a remise of technical evaluation and adopted concepts by Japanese participants contributing to making up the Road-map. (G.K.)

  1. Summary of Structural Concept Development and High Temperature Structural Integrity Evaluation Technology for a Gen-IV SFR

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jae Han; Joo, Young Sang; Lee, Hyeong Yeon (and others)

    2008-04-15

    The economic improvement is a hot issue as one of Gen IV nuclear plant goals. It requires many researches and development works to meet the goal by securing the same level of plant safety. One of the key research items is the increase of the plant capacity with the minimum number of components and loops. Through the successful conceptual design experience for the KALIMER-600, the structural design study for a 1200MWe large capacity of sodium-cooled fast reactor has been performed to achieve the above plant size effects. The component number and reactor structural sizing were determined based on the core and fluid system design information. Several researches were performed to reduce the construction cost of NSSS in structural point of view, for example, a simplified component arrangement, concept proposals of integrated components, a high temperature LBB application technology, and an innovative in-service inspection (ISI) tool, and a computer program development of the ASME-NH design procedure of the class 1 structure and component under high temperature over 500 .deg. C. The IHTS piping arrangement was also proposed to minimize the length through the properly locating the SG and pump by 126m. Further studies of these concepts are required to confirm on the fabricability and the structural integrity for the operating and design loads. The proposed concepts will be optimized to a unified conceptual design through several trade-off studies.

  2. Overview of Generation IV (Gen IV) Reactor Designs - Safety and Radiological Protection Considerations. Published on September 24, 2012

    International Nuclear Information System (INIS)

    Couturier, Jean; Bruna, Giovanni; Baudrand, Olivier; Blanc, Daniel; Ivanov, Evgeny; Bonneville, Herve; Clement, Bernard; Kissane, Martin; Meignen, Renaud; Monhardt, Daniel; Nicaise, Gregory; Bourgois, Thierry; Hache, Georges

    2012-01-01

    The purpose of this document is to provide an updated overview of specific safety and radiological protection issues for all the reactor concepts adopted by the GIF (Generation IV International Forum), independent of their advantages or disadvantages in terms of resource optimization or long-lived-waste reduction. In particular, this new document attempts to bring out the advantages and disadvantages of each concept in terms of safety, taking into account the Western European Nuclear Regulators' Association (WENRA) statement concerning safety objectives for new nuclear power plants. Using an identical framework for each reactor concept (sodium-cooled fast reactors or SFR, high / very-high temperature helium-cooled reactors of V/HTR, gas-cooled fast reactors or GFR, lead-or lead / bismuth-cooled fast reactors or LFR, molten salt reactors or MSR, and supercritical-water-cooled reactors or SCWR), this summary report provides some general conclusions regarding their safety and radiological protection issues, inspired by WENRA's safety objectives and on the basis of available information. Initial lessons drawn from the events at the Fukushima-Daiichi nuclear power plant in March 2011 have also been taken into account in IRSN's analysis of each reactor concept

  3. US Nuclear Regulatory Commission region IV

    International Nuclear Information System (INIS)

    Vanderburch, C.

    1996-01-01

    The NRC has established a policy to provide for the timely through and systematic inspection of significant operational events at nuclear power plants. This includes the use of an Augmented Inspection Team to determine the causes, conditions, and circumstances relevant to an event and to communicate its findings and conclusions to NRC management. In accordance with NRC Inspection Manual Chapter 0325. The Region IV Regional Administrator dispatched an Augmented Inspection Team to the Wolf Creek Nuclear Generating Station to review the circumstances surrounding a manual reactor trip on January 30, 1996, with the failure of five control rods to fully insert into the core, a failure of the turbine-driven auxiliary feedwater pump, and the subsequent loss of one train of the essential service water system

  4. A Study on the Planning of Technology Development and Research for Generation IV Nuclear Energy Systems

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Moon Hee; Kim, H. R.; Kim, H. J. and others

    2005-08-15

    This study aimed at the planning the domestic technology development of the Gen IV and the formulating the international collaborative project contents and executive plan for 'A Validity Assessment and Policies of the R and D of Generation IV Nuclear Energy Systems'. The results of the study include follows; - Survey of the technology state in the fields of the Gen IV system specific technologies and the common technologies, and the plans of the international collaborative research - Drawing up the executive research and development plan by the experts of the relevant technology field for the systems which Korean will participate in. - Formulating the effective conduction plan of the program reflecting the view of the experts from the industry, the university and the research institute. - Establishing the plan for estimation of the research fund and the manpower for the efficient utilization of the domestic available resources. This study can be useful material for evaluating the appropriateness of the Korea's participation in the international collaborative development of the Gen IV, and can be valuably utilized to establish the strategy for the effective conduction of the program. The executive plan of the research and development which was produced in this study will be used to the basic materials for the establishing the guiding direction and the strategic conduction of the program when the research and development is launched in the future.

  5. Mechanical Design Concept of Fuel Assembly for Prototype GEN-IV Sodium-cooled Fast Reactor

    International Nuclear Information System (INIS)

    Yoon, K. H.; Lee, C. B.

    2014-01-01

    The prototype GEN-IV sodium-cooled fast reactor (PGSFR) is an advanced fast reactor plant design that utilizes compact modular pool-type reactors sized to enable factory fabrication and an affordable prototype test for design certification at minimum cost and risk. The design concepts of the fuel assembly (FA) were introduced for a PGSFR. Unlike that for the pressurized water reactor, there is a neutron shielding concept in the FA and recycling metal fuel. The PGSFR core is a heterogeneous, uranium-10% zirconium (U-10Zr) metal alloy fuel design with 112 assemblies: 52 inner core fuel assemblies, 60 outer core fuel assemblies, 6 primary control assemblies, 3 secondary control assemblies, 90 reflector assemblies and 102 B4C shield assemblies. This configuration is shown in Fig. 1. The core is designed to produce 150 MWe with an average temperature rise of 155 .deg. C. The inlet temperature is 390 .deg. C and the bulk outlet temperature is 545 .deg. C. The core height is 900 mm and the gas plenum length is 1,250 mm. A mechanical design of a fuel assembly for a PGSFR was established. The mechanical design concepts are well realized in the design. In addition to this, the analytical and experimental works will be carries out for verifying the design soundness

  6. Mechanical Design Concept of Fuel Assembly for Prototype GEN-IV Sodium-cooled Fast Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, K. H.; Lee, C. B. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2014-10-15

    The prototype GEN-IV sodium-cooled fast reactor (PGSFR) is an advanced fast reactor plant design that utilizes compact modular pool-type reactors sized to enable factory fabrication and an affordable prototype test for design certification at minimum cost and risk. The design concepts of the fuel assembly (FA) were introduced for a PGSFR. Unlike that for the pressurized water reactor, there is a neutron shielding concept in the FA and recycling metal fuel. The PGSFR core is a heterogeneous, uranium-10% zirconium (U-10Zr) metal alloy fuel design with 112 assemblies: 52 inner core fuel assemblies, 60 outer core fuel assemblies, 6 primary control assemblies, 3 secondary control assemblies, 90 reflector assemblies and 102 B4C shield assemblies. This configuration is shown in Fig. 1. The core is designed to produce 150 MWe with an average temperature rise of 155 .deg. C. The inlet temperature is 390 .deg. C and the bulk outlet temperature is 545 .deg. C. The core height is 900 mm and the gas plenum length is 1,250 mm. A mechanical design of a fuel assembly for a PGSFR was established. The mechanical design concepts are well realized in the design. In addition to this, the analytical and experimental works will be carries out for verifying the design soundness.

  7. Analysis of a Spanish energy scenario with Generation IV nuclear reactors

    International Nuclear Information System (INIS)

    Ochoa, Raquel; Jimenez, Gonzalo; Perez-Martin, Sara

    2013-01-01

    Highlights: • Spanish energy scenario for the hypothetical deployment of Gen-IV SFR reactors. • Availability of national resources is assessed, considering SFR’s breeding. • An assessment of the impact of transmuting MA on the final repository. • SERPENT code with own pre- and post-processing tools were employed. • The employed SFR core design is based on the specifications of the CP-ESFR. - Abstract: The advantages of fast-spectrum reactors consist not only of an efficient use of fuel through the breeding of fissile material and the use of natural or depleted uranium, but also of the potential reduction of the amount of actinides such as americium and neptunium contained in the irradiated fuel. The first aspect means a guaranteed future nuclear fuel supply. The second fact is key for high-level radioactive waste management, because these elements are the main responsible for the radioactivity of the irradiated fuel in the long term. The present study aims to analyze the hypothetical deployment of a Gen-IV Sodium Fast Reactor (SFR) fleet in Spain. A nuclear fleet of fast reactors would enable a fuel cycle strategy different than the open cycle, currently adopted by most of the countries with nuclear power. A transition from the current Gen-II to Gen-IV fleet is envisaged through an intermediate deployment of Gen-III reactors. Fuel reprocessing from the Gen-II and Gen-III Light Water Reactors (LWR) has been considered. In the so-called advanced fuel cycle, the reprocessed fuel used to produce energy will breed new fissile fuel and transmute minor actinides at the same time. A reference case scenario has been postulated and further sensitivity studies have been performed to analyze the impact of the different parameters on the required reactor fleet. The potential capability of Spain to supply the required fleet for the reference scenario using national resources has been verified. Finally, some consequences on irradiated final fuel inventory are assessed

  8. Generation IV Nuclear Energy Systems Construction Cost Reductions through the Use of Virtual Environments - Task 5 Report: Generation IV Reactor Virtual Mockup Proof-of-Principle Study

    International Nuclear Information System (INIS)

    Timothy Shaw; Anthony Baratta; Vaughn Whisker

    2005-01-01

    Task 5 report is part of a 3 year DOE NERI-sponsored effort evaluating immersive virtual reality (CAVE) technology for design review, construction planning, and maintenance planning and training for next generation nuclear power plants. Program covers development of full-scale virtual mockups generated from 3D CAD data presented in a CAVE visualization facility. Created a virtual mockup of PBMR reactor cavity and discussed applications of virtual mockup technology to improve Gen IV design review, construction planning, and maintenance planning

  9. Generation IV Nuclear Energy Systems Construction Cost Reductions through the Use of Virtual Environments - Task 5 Report: Generation IV Reactor Virtual Mockup Proof-of-Principle Study

    Energy Technology Data Exchange (ETDEWEB)

    Timothy Shaw; Anthony Baratta; Vaughn Whisker

    2005-02-28

    Task 5 report is part of a 3 year DOE NERI-sponsored effort evaluating immersive virtual reality (CAVE) technology for design review, construction planning, and maintenance planning and training for next generation nuclear power plants. Program covers development of full-scale virtual mockups generated from 3D CAD data presented in a CAVE visualization facility. Created a virtual mockup of PBMR reactor cavity and discussed applications of virtual mockup technology to improve Gen IV design review, construction planning, and maintenance planning.

  10. Computations of nuclear response functions with MACK-IV

    International Nuclear Information System (INIS)

    Abdou, M.A.; Gohar, Y.

    1978-01-01

    The MACK computer program calculates energy pointwise and multigroup nuclear response functions from basic nuclear data in ENDF/B format. The new version of the program, MACK-IV, incorporates major developments and improvements aimed at maximizing the utilization of available nuclear data and ensuring energy conservation in nuclear heating calculations. A new library, MACKLIB-IV, of nuclear response functions was generated in the CTR energy group structure of 171 neutron groups and 36 gamma groups. The library was prepared using MACK-IV and ENDF/B-IV and is suitable for fusion, fusion-fission hybrids, and fission applications

  11. Computations of nuclear response functions with MACK-IV

    Energy Technology Data Exchange (ETDEWEB)

    Abdou, M A; Gohar, Y

    1978-01-01

    The MACK computer program calculates energy pointwise and multigroup nuclear response functions from basic nuclear data in ENDF/B format. The new version of the program, MACK-IV, incorporates major developments and improvements aimed at maximizing the utilization of available nuclear data and ensuring energy conservation in nuclear heating calculations. A new library, MACKLIB-IV, of nuclear response functions was generated in the CTR energy group structure of 171 neutron groups and 36 gamma groups. The library was prepared using MACK-IV and ENDF/B-IV and is suitable for fusion, fusion-fission hybrids, and fission applications.

  12. Innovative materials for GEN IV systems and transmutation facilities (cross-cutting research project GETMAT)

    International Nuclear Information System (INIS)

    Fazio, Concetta; Rieth, Michael; Gomez Briceno, Dolores; Gessi, Alessandro; Henry, Jean; Malerba, Lorenzo

    2010-01-01

    The objectives of the 'Generation IV and Transmutation Materials' (GETMAT) project is to contribute to the development, qualification and ranking of different types of ODS steels and to qualify Ferritic/Martensitic steels in a wide irradiation condition range. The experimental approach is complemented by the development of physical models with the aim to understand and improve the predictability of the materials performance. The GETMAT consortium is composed of fourteen Research centres, nine Universities and one Utility, from eleven European countries. The R and D tasks address (i) the materials availability, fabricability, weldability and their fundamental mechanical properties, (ii) their compatibility with aggressive coolants and development of corrosion protection methods; (iii) their performance under neutron irradiation, and (iv) starting from model alloys relevant for the two classes of alloys, the development and validation of physical models. The exploitation of results to potential end-users will occur through the 'GETMAT User Group', where exchange of information with the nuclear and steel industries, international (outside Europe) Research Organisations and engineers involved in the design of the new reactors, will occur. The exploitation of results to potential end-users will occur through the G ETMAT User Group , where exchange of information with the nuclear and steel industries, international (outside Europe) Research Organisations and engineers involved in the design of the new reactors, will occur

  13. Development of Basic Key Technologies for Gen IV SFR Safety Evaluation

    International Nuclear Information System (INIS)

    Jeong, Hae Yong; Kwon, Young Min; Kim, Tae Woon; Park, Soo Yong; Suk, Soo Dong; Lee, Kwi Lim; Lee, Yong Bum; Chang, Won Pyo; Ha, Kwi Seok; Hahn, Sang Hoon

    2010-07-01

    Safety issues and design requirements on control rod worth were identified through the evaluation of safety design characteristics and the preliminary safety evaluation. This results will be taken into account for the conceptual design studies of the demonstration reactor in the next stage. The Level-1 Pasa has been performed and a quantitative Cdf value was produced for the selected design from the several candidates. The inherent safety characteristics of the selected design were evaluated through the DBE and ATWS analyses. A surrogate material for Tru has been selected which is applicable to the study of liquidus/solidus temperature test for the metallic fuel containing Tru. A methodology for the regression analysis with surrogate material has been developed and valuable data on metal fuel liquidus/solidus temperature have been measured. A simple mechanistic model describing a bending of subassemblies has been formulated based on the foreign test data and existing models. Its applicability has been evaluated for the Phenix design. New criteria of the core damage for the SFR PSA were identified. The list of initiating events, system response event tree, and core response event tree, which constitute a PSA methodology for an SFR, have been introduced. By developing the SFR PIRT, phenomenological model features, which have to be satisfied in a safety code, were defined and the PIRT results were applied to the design of the PDRC test facility. Bases for a safety evaluation methodology for the SFR DBEs have been also prepared. A draft version of the topical report on the code for local fault analysis has been completed. Since 2007, the MARS-LMR code has been developed and assessments for model validation with the test data from EBR-II and Phenix reactor have been continued. The code has been applied to the evaluation of passive safety of a conceptual design of Gen IV SFR

  14. Safety design approach for JSFR toward the realization of GEN IV SFR

    International Nuclear Information System (INIS)

    Kubo, S.; Yamano, H.; Chikazawa, Y.; Shimakawa, Y.

    2013-01-01

    Conclusion: Safety Design Approach for JSFR: • Based on the safety design criteria for Generation-IV SFR • DECs, Situations practically eliminated and related design measures are identified and selected with due consideration of the safety features of SFR and the lessons learned from the TEPCO’s Fukushima Dai-ichi nuclear power plants accident Safety Design Concept of JSFR: • For failure to shutdown: Passive shutdown capability, Mitigation of core damage (Prevention of severe mechanical energy release, In-Vessel Retention) • For failure to remove heat: Prevention of significant core damage (Natural circulation DHR, Alternative cooling measures) • Containment: Prevention of sever dynamic loads by design measures (IVR, double boundary concept, inertization)

  15. Conceptual Design on Primary Control Rod Drive Mechanism of a Prototype Gen-IV SFR

    International Nuclear Information System (INIS)

    Lee, Jae Han; Koo, Gyeong Hoi

    2013-01-01

    This paper describes the key concept of the drive mechanism, and suggests a required motor power and reducer gears to meet the functional design requirements, and a seismic response analysis of CRDM housing is performed to check its structural integrity. An AC servo motor is selected as a CRA driving power because it uses permanent magnets and is brushless type while DC motor needs a brush and a coil rotates. The control shim motor size is constrained by a housing diameter of 250mm. The driving system has several design requirements. To calculate the motor power, the drive shaft torque is needed. One part of the drive shaft has a lead screw, driving by a ball-nut. The ball screw driver torque (Tr) is calculated by some equations as follow; A servo motor with a nominal power of 100W, a nominal torque of 0.32 N-m (max. 0.48N-m) is selected considering a safety margin. Its diameter is about 50mm. The fast drive-in motor needs a strong power to insert enforcedly the stuck CRA into core within a required time. The motor sizes are calculated by the same procedure. The diameters are in the range of 80mm to 110mm by the insertion time (10 ∼ 24 seconds). The prototype Gen-IV SFR (sodium-cooled Fast Reactor) is of 150MWe capacity. The reactor has six primary control rod assemblies(CRAs). The primary control rod is used for power control, burn-up compensation and reactor shutdown in response to demands from the plant control or protection systems. The control rod drive mechanism (CRDM) consists of the drive motor assembly, the driveline, and its housing. The driveline consists of three concentric members of a drive shaft, a tension tube, and a position indicator rod, and it connects the drive motor assembly to the CRA. Main issue is that these many driving parts shall be enclosed within a limited housing diameter because the available pitch of CRDMs is limited by 300mm

  16. Conceptual Design on Primary Control Rod Drive Mechanism of a Prototype Gen-IV SFR

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jae Han; Koo, Gyeong Hoi [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2013-10-15

    This paper describes the key concept of the drive mechanism, and suggests a required motor power and reducer gears to meet the functional design requirements, and a seismic response analysis of CRDM housing is performed to check its structural integrity. An AC servo motor is selected as a CRA driving power because it uses permanent magnets and is brushless type while DC motor needs a brush and a coil rotates. The control shim motor size is constrained by a housing diameter of 250mm. The driving system has several design requirements. To calculate the motor power, the drive shaft torque is needed. One part of the drive shaft has a lead screw, driving by a ball-nut. The ball screw driver torque (Tr) is calculated by some equations as follow; A servo motor with a nominal power of 100W, a nominal torque of 0.32 N-m (max. 0.48N-m) is selected considering a safety margin. Its diameter is about 50mm. The fast drive-in motor needs a strong power to insert enforcedly the stuck CRA into core within a required time. The motor sizes are calculated by the same procedure. The diameters are in the range of 80mm to 110mm by the insertion time (10 ∼ 24 seconds). The prototype Gen-IV SFR (sodium-cooled Fast Reactor) is of 150MWe capacity. The reactor has six primary control rod assemblies(CRAs). The primary control rod is used for power control, burn-up compensation and reactor shutdown in response to demands from the plant control or protection systems. The control rod drive mechanism (CRDM) consists of the drive motor assembly, the driveline, and its housing. The driveline consists of three concentric members of a drive shaft, a tension tube, and a position indicator rod, and it connects the drive motor assembly to the CRA. Main issue is that these many driving parts shall be enclosed within a limited housing diameter because the available pitch of CRDMs is limited by 300mm.

  17. Generation IV Nuclear Energy Systems Construction Cost Reductions through the Use of Virtual Environments - Final Report

    International Nuclear Information System (INIS)

    Timothy Shaw; Anthony Baratta; Vaughn Whisker

    2005-01-01

    Final report of 3 year DOE NERI-sponsored effort evaluating immersive virtual reality (CAVE) technology for design review, construction planning, and maintenance planning and training for next generation nuclear power plants. Program covers development of full-scale virtual mockups generated from 3D CAD data presented in a CAVE visualization facility. Mockups applied to design review of AP600/1000, Construction planning for AP 600, and AP 1000 maintenance evaluation. Proof of concept study also performed for GenIV PBMR models

  18. Generation IV Nuclear Energy Systems Construction Cost Reductions through the Use of Virtual Environments - Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Timothy Shaw; Anthony Baratta; Vaughn Whisker

    2005-02-28

    Final report of 3 year DOE NERI-sponsored effort evaluating immersive virtual reality (CAVE) technology for design review, construction planning, and maintenance planning and training for next generation nuclear power plants. Program covers development of full-scale virtual mockups generated from 3D CAD data presented in a CAVE visualization facility. Mockups applied to design review of AP600/1000, Construction planning for AP 600, and AP 1000 maintenance evaluation. Proof of concept study also performed for GenIV PBMR models.

  19. Mechanisms Governing the Creep Behavior of High Temperature Alloys for Generation IV Nuclear Energy Systems

    International Nuclear Information System (INIS)

    Vasudevan, Vijay; Carroll, Laura; Sham, Sam

    2015-01-01

    This research project, which includes collaborators from INL and ORNL, focuses on the study of alloy 617 and alloy 800H that are candidates for applications as intermediate heat exchangers in GEN IV nuclear reactors, with an emphasis on the effects of grain size, grain boundaries and second phases on the creep properties; the mechanisms of dislocation creep, diffusional creep and cavitation; the onset of tertiary creep; and theoretical modeling for long-term predictions of materials behavior and for high temperature alloy design.

  20. Mechanisms Governing the Creep Behavior of High Temperature Alloys for Generation IV Nuclear Energy Systems

    Energy Technology Data Exchange (ETDEWEB)

    Vasudevan, Vijay [Univ. of Cincinnati, OH (United States); Carroll, Laura [Idaho National Lab. (INL), Idaho Falls, ID (United States); Sham, Sam [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-04-06

    This research project, which includes collaborators from INL and ORNL, focuses on the study of alloy 617 and alloy 800H that are candidates for applications as intermediate heat exchangers in GEN IV nuclear reactors, with an emphasis on the effects of grain size, grain boundaries and second phases on the creep properties; the mechanisms of dislocation creep, diffusional creep and cavitation; the onset of tertiary creep; and theoretical modeling for long-term predictions of materials behavior and for high temperature alloy design.

  1. The 1st reveal of Gen-V nuclear energy. Prospecting investigation of nuclear power 2050 (A2050) for energy innovation in the nuclear industry

    International Nuclear Information System (INIS)

    Woo, Tae Ho; Lee, Soon Ho

    2012-01-01

    The proposed strategy for the future nuclear energy is analyzed. The conventional nuclear power plants (NPPs) are investigated by the 21 st style interdisciplinary research as the information technology (IT), nanotechnology (NT), and biological technology (BT). New kinds of energy production methods as spherical isotropic power reactor (SIPR) and nano lattice power (NLP) are introduced. In addition, the problems of Gen-IV technologies are challenged to be solved, which is the matters of the mechanical and thermal controls of several coolants cases. The simulation result shows the increasing for the usefulness of the business. The core and vessel are very tractable due to moving core vessel (SIPR). The concept of safety system is changed to be submerged into coolant instead of injection concept (SIPR). The commercial fusion energy is realized for mass energy productions (NLP). Eventually, the safety as well as economical status is increased comparing to previous NPPs. (orig.)

  2. The 1{sup st} reveal of Gen-V nuclear energy. Prospecting investigation of nuclear power 2050 (A2050) for energy innovation in the nuclear industry

    Energy Technology Data Exchange (ETDEWEB)

    Woo, Tae Ho [Seoul National Univ. (Korea, Republic of). Dept. of Nuclear Engineering; Lee, Seok Jong [POSCO Engineering and Construction Co., Ltd., Incheon (Korea, Republic of); Lee, Soon Ho [SK Engineering and Construction Co., Ltd., Seoul (Korea, Republic of)

    2012-11-15

    The proposed strategy for the future nuclear energy is analyzed. The conventional nuclear power plants (NPPs) are investigated by the 21{sup st} style interdisciplinary research as the information technology (IT), nanotechnology (NT), and biological technology (BT). New kinds of energy production methods as spherical isotropic power reactor (SIPR) and nano lattice power (NLP) are introduced. In addition, the problems of Gen-IV technologies are challenged to be solved, which is the matters of the mechanical and thermal controls of several coolants cases. The simulation result shows the increasing for the usefulness of the business. The core and vessel are very tractable due to moving core vessel (SIPR). The concept of safety system is changed to be submerged into coolant instead of injection concept (SIPR). The commercial fusion energy is realized for mass energy productions (NLP). Eventually, the safety as well as economical status is increased comparing to previous NPPs. (orig.)

  3. Status of the Gen-IV Proliferation Resistance and Physical Protection (PRPP) Evaluation Methodology

    International Nuclear Information System (INIS)

    Whitlock, J.; Bari, R.; Peterson, P.; Padoani, F.; Cojazzi, G.G.M.; Renda, G.; ); Cazalet, J.; Haas, E.; Hori, K.; Kawakubo, Y.; Chang, S.; Kim, H.; Kwon, E.-H.; Yoo, H.; Chebeskov, A.; Pshakin, G.; Pilat, J.F.; Therios, I.; Bertel, E.

    2015-01-01

    Methodologies have been developed within the Generation IV International Forum (GIF) to support the assessment and improvement of system performance in the areas safeguards, security, economics and safety. Of these four areas, safeguards and security are the subjects of the GIF working group on Proliferation Resistance and Physical Protection (PRPP). Since the PRPP methodology (now at Revision 6) represents a mature, generic, and comprehensive evaluation approach, and is freely available on the GIF public website, several non-GIF technical groups have chosen to utilize the PRPP methodology for their own goals. Indeed, the results of the evaluations performed with the methodology are intended for three types of generic users: system designers, programme policy makers, and external stakeholders. The PRPP Working Group developed the methodology through a series of demonstration and case studies. In addition, over the past few years various national and international groups have applied the methodology to inform nuclear energy system designs, as well as to support the development of approaches to advanced safeguards. A number of international workshops have also been held which have introduced the methodology to design groups and other stakeholders. In this paper we summarize the technical progress and accomplishments of the PRPP evaluation methodology, including applications outside GIF, and we outline the PRPP methodology's relationship with the IAEA's INPRO methodology. Current challenges with the efficient implementation of the methodology are outlined, along with our path forward for increasing its accessibility to a broader stakeholder audience - including supporting the next generation of skilled professionals in the nuclear non-proliferation field. (author)

  4. Progress reports for Gen IV sodium fast reactor activities FY 2007

    International Nuclear Information System (INIS)

    Cahalan, J. E.; Tentner, A. M.

    2007-01-01

    for prevention of progression into severe accident conditions (prevention of core melting) or for mitigation of severe accident consequences (mitigation of the impact of core melting to protect public health and safety). Because design measures for severe accident prevention and mitigation are beyond the normal design basis, established regulatory guidelines and codes do not provide explicit identification of the design performance requirements for severe accident accommodation. The treatment of severe accidents is one of the key issues of R and D plans for the Gen IV systems in general, and for the Sodium Fast Reactor (SFR) in particular. Despite the lack of an unambiguous definition of safety approach applicable for severe accidents, there is an emerging consensus on the need for their consideration for the design. The US SFR program and Argonne National Laboratory (ANL) in particular have actively studied the potential scenarios and consequences of Hypothetical Core Disruptive Accidents (HCDA) for SFRs with oxide fuel during the Fast Flux Test Facility (FFTF) and Clinch River Breeder Reactor Plant (CRBRP) programs in the 70s and 80s. Later, the focus of the US SFR safety R and D activities shifted to the prevention of all HCDAs through passive safety features of the SFRs with metal fuel in the Integral Fast Reactor (IFR) program, and the study of severe accident consequences was de-emphasized. The goal of this paper is to provide an overview of the current SFR safety approach and the role of severe accidents in Japan and France, in preparation for an expected and more active collaboration in this area between the US, Japan, and France

  5. Design and Selection of Innovative Primary Circulation Pumps for GEN-IV Lead Fast Reactors

    Directory of Open Access Journals (Sweden)

    Walter Borreani

    2017-12-01

    Full Text Available Although Lead-cooled Fast Reactor (LFR is not a new concept, it continues to be an example of innovation in the nuclear field. Recently, there has been strong interest in liquid lead (Pb or liquid lead–bismuth eutectic (LBE both critical and subcritical systems in a relevant number of Countries, including studies performed in the frame of GENERATION-IV initiative. In this paper, the theoretical and computational findings for three different designs of Primary Circulation Pump (PCP evolving liquid lead (namely the jet pump, the Archimedean pump and the blade pump are presented with reference to the ALFRED (Advanced Lead Fast Reactor European Demonstrator design. The pumps are first analyzed from the theoretical point of view and then modeled with a 3D CFD code. Required design performance of the pumps are approximatively around an effective head of 2 bar with a mass flow rate of 5000 kg/s. Taking into account the geometrical constraints of the reactor and the fluid dynamics characteristics of the molten lead, the maximum design velocity for molten lead fluid flow of 2 m/s may be exceeded giving rise to unacceptable erosion phenomena of the blade or rotating component of the primary pumping system. For this reason a deep investigation of non-conventional axial pumps has been performed. The results presented shows that the design of the jet pump looks like beyond the current technological feasibility while, once the mechanical challenges of the Archimedean (screw pump and the fluid-dynamic issues of the blade pump will be addressed, both could represent viable solutions as PCP for ALFRED. Particularly, the blade pump shows the best performance in terms of pressure head generated in normal operation conditions as well as pressure drop in locked rotor conditions. Further optimizations (mainly for what the geometrical configuration is concerned are still necessary.

  6. An Integrated Safety Assessment Methodology for Generation IV Nuclear Systems

    International Nuclear Information System (INIS)

    Leahy, Timothy J.

    2010-01-01

    The Generation IV International Forum (GIF) Risk and Safety Working Group (RSWG) was created to develop an effective approach for the safety of Generation IV advanced nuclear energy systems. Early work of the RSWG focused on defining a safety philosophy founded on lessons learned from current and prior generations of nuclear technologies, and on identifying technology characteristics that may help achieve Generation IV safety goals. More recent RSWG work has focused on the definition of an integrated safety assessment methodology for evaluating the safety of Generation IV systems. The methodology, tentatively called ISAM, is an integrated 'toolkit' consisting of analytical techniques that are available and matched to appropriate stages of Generation IV system concept development. The integrated methodology is intended to yield safety-related insights that help actively drive the evolving design throughout the technology development cycle, potentially resulting in enhanced safety, reduced costs, and shortened development time.

  7. Conversion of actinide solutions for the production of MA bearing fuels for Gen IV fast reactor systems

    International Nuclear Information System (INIS)

    Fernandez, A.; McGinley, J.; Somers, J.

    2008-01-01

    The conversion of the solution to solid for fuels containing minor actinides for accelerator driven systems or Gen IV fast reactors cannot be made by conventional ammonia or oxalate precipitation as is the case in today's reprocessing plant. The small particle size and concomitant dust that is produced in subsequent processing steps will not permit use of these processes on industrial scale. Innovation is needed to avoid dust generating powders, and indeed to simplify the processes themselves. Two such processing routes have been developed at the JRC-ITU. The sol gel route has been used to produce fuel containing Am and Np for the SUPERFACT, TRABANT and other irradiation experiments. The infiltration process has also been established and fuels have been produced for the FUTURIX and HELIOS experiments. (authors)

  8. Conversion of actinide solutions for the production of MA bearing fuels for Gen IV fast reactor systems

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez, A.; McGinley, J.; Somers, J. [European Commission, Joint Research Centre, Institute for Transuranium Elements P.O.Box 2340, Karlsruhe, D-76125 (Germany)

    2008-07-01

    The conversion of the solution to solid for fuels containing minor actinides for accelerator driven systems or Gen IV fast reactors cannot be made by conventional ammonia or oxalate precipitation as is the case in today's reprocessing plant. The small particle size and concomitant dust that is produced in subsequent processing steps will not permit use of these processes on industrial scale. Innovation is needed to avoid dust generating powders, and indeed to simplify the processes themselves. Two such processing routes have been developed at the JRC-ITU. The sol gel route has been used to produce fuel containing Am and Np for the SUPERFACT, TRABANT and other irradiation experiments. The infiltration process has also been established and fuels have been produced for the FUTURIX and HELIOS experiments. (authors)

  9. Basis for the safety approach for design and assessment of Generation IV nuclear systems

    International Nuclear Information System (INIS)

    Fiorini, G.L.; Leahy, T.

    2009-01-01

    The primary objective of the RSWG is the implementation of a harmonized approach on long-term safety, and to address risk and regulatory issues in development of the next generation of nuclear systems. To this end, the group is proposing safety goals and evaluation methodology applicable for the design and assessment of future systems. The paper resumes the content of the first RSWG report which provides insights for the safety approach and assists the GIF Systems Steering Committee as well as the GIF Experts Group and the GIF Policy Group for the definition of the most adequate safety related Gen IV R and D. The document is also an essential contributor to help identifying the needed supportive crosscut R and D effort (i.e. applicable to all the innovative nuclear technologies). Although the report presents a number of thoughts and recommendations, it really represents only the start of the efforts for the RSWG. (author)

  10. Bolivian Rhinotragini IV: Paraeclipta gen. nov. (Coleoptera, Cerambycidae, new species and new combinations

    Directory of Open Access Journals (Sweden)

    Robin O. S. Clarke

    2011-01-01

    Full Text Available Paraeclipta gen. nov. is described to allocate five new species, and ten transferred from Eclipta Bates, 1873: P. cabrujai sp. nov.; P. clementecruzi sp. nov.; P. melgarae sp. nov.; P. tomhacketti sp. nov.; P. moscosoi sp. nov.; P. bicoloripes (Zajciw, 1965, comb. nov.; P. croceicornis (Gounelle, 1911, comb. nov.; P. flavipes (Melzer, 1922, comb. nov.; P. jejuna (Gounelle, 1911, comb. nov.; P. kawensis (Peñaherrera-Leiva & Tavakilian, 2004, comb. nov.; P. longipennis (Fisher, 1947, comb. nov.; P. rectipennis (Zajciw, 1965, comb. nov.; P. soumourouensis (Tavakilian & Peñaherrera-Leiva, 2003, comb. nov.; P. tenuis (Burmeister, 1865, comb. nov.; and P. unicoloripes (Zajciw, 1965, comb. nov. The Bolivian species are illustrated. A key to their identification and host flower records are provided.

  11. Progress in the development of the neutron flux monitoring system of the French GEN-IV SFR: simulations and experimental validations [ANIMMA--2015-IO-98

    Energy Technology Data Exchange (ETDEWEB)

    Jammes, C.; Filliatre, P.; De Izarra, G. [CEA, DEN, DER, Instrumentation, Sensors and Dosimetry Laboratory, Cadarache, F-13108 Saint-Paul-lez-Durance, (France); Elter, Zs.; Pazsit, I. [Chalmers University of Technology, Department of Applied Physics, Division of Nuclear Engineering, SE-412 96 Goteborg, (Sweden); Verma, V.; Hellesen, C.; Jacobsson, S. [Division of Applied Nuclear Physics, Uppsala University, Box 516, SE-75120 Uppsala, (Sweden); Hamrita, H.; Bakkali, M. [CEA, DRT, LIST, Sensors and Electronic Architecture Laboratory, Saclay, F-91191 Gif Sur Yvette, (France); Chapoutier, N.; Scholer, A-C.; Verrier, D. [AREVA NP, 10 rue Juliette Recamier F-69456 Lyon, (France); Cantonnet, B.; Nappe, J-C. [PHONIS France S.A.S, Nuclear Instrumentation, Avenue Roger Roncier, B.P. 520, F-19106 Brive Cedex, (France); Molinie, P.; Dessante, P.; Hanna, R.; Kirkpatrick, M.; Odic, E. [Supelec, Department of Power and Energy System, F-91192 Gif Sur Yvette, (France); Jadot, F. [CEA, DEN, DER, ASTRID Project Group, Cadarache, F-13108 Saint-Paul-lez-Durance, (France)

    2015-07-01

    The neutron flux monitoring system of the French GEN-IV sodium-cooled fast reactor will rely on high temperature fission chambers installed in the reactor vessel and capable of operating over a wide-range neutron flux. The definition of such a system is presented and the technological solutions are justified with the use of simulation and experimental results. (authors)

  12. Multi-criteria methodology to design a sodium-cooled carbide-fueled Gen-IV reactor

    International Nuclear Information System (INIS)

    Stauff, N.

    2011-01-01

    Compared with earlier plant designs (Phenix, Super-Phenix, EFR), Gen IV Sodium-cooled Fast Reactor requires improved economics while meeting safety and non-proliferation criteria. Mixed Oxide (U-Pu)O 2 fuels are considered as the reference fuels due to their important and satisfactory feedback experience. However, innovative carbide (U-Pu)C fuels can be considered as serious competitors for a prospective SFR fleet since carbide-fueled SFRs can offer another type of optimization which might overtake on some aspects the oxide fuel technology. The goal of this thesis is to reveal the potentials of carbide by designing an optimum carbide-fueled SFR with competitive features and a naturally safe behavior during transients. For a French nuclear fleet, a 1500 MW(e) break-even core is considered. To do so, a multi-physic approach was developed taking into account neutronics, fuel thermo-mechanics and thermal-hydraulic at a pre-design stage. Simplified modeling with the calculation of global neutronic feedback coefficients and a quasi-static evaluation was developed to estimate the behavior of a core during overpower transients, loss of flow and/or loss of heat removal transients. The breakthrough of this approach is to provide the designer with an overall view of the iterative process, emphasizing the well-suited innovations and the most efficient directions that can improve the SFR design project.This methodology was used to design a core that benefits from the favorable features of carbide fuels. The core developed is a large carbide-fueled SFR with high power density, low fissile inventory, break-even capability and forgiving behaviors during the un-scrammed transients studied that should prevent using expensive mitigate systems. However, the core-peak burnup is unlikely to significantly exceed 100 MWd/kg because of the large swelling of the carbide fuel leading to quick pellet-clad mechanical interaction and the low creep capacity of carbide. Moderate linear power fuel

  13. Unprotected Accident Analyses of the 1200MWe GEN-IV Sodium-Cooled Fast Reactor Using the SSC-K Code

    International Nuclear Information System (INIS)

    Kwon, Young Min; Lee, Kwi Lim; Ha, Kwi Seok; Jeong, Hae Yong; Chang, Won Pyo; Seok, Su Dong; Lee, Yong Bum

    2010-02-01

    A conceptual design of an advanced breakeven sodium-cooled fast reactor (G4SFR) has recently been developed by KAERI under the national nuclear R and D plan. The G4SFR is a 1,200MWe metal-fueled pool-type sodium-cooled fast reactor adopting advanced safety design features. The G4SFR development plan focuses on particular technology development efforts to effectively meet the goals of the Generation-IV (GEN-IV) nuclear system such as efficient utilization of resources, economic competitiveness, a high standard of safety, and enhanced proliferation resistance. To enhance the safety of G4SFR, advanced design features of metal-fueled core, simple and large sodium-inventory primary heat transport system, and passive safety decay heat removal system are included in the reactor design. To evaluate potential safety characteristics of such advanced design features, the plant responses and safety margins were investigated using the system transient code SSC-K for three unprotected accidents of UTOP, ULOF, and ULOHS. It was shown that the G4SFR design has inherent and passive safety characteristics and is accommodating the selected ATWS events. The inherent safety mechanism of the reactor design makes the core shutdown with sufficient margin and passive removal of decay heat with matching the core power to heat sink by passive self-regulation. The self-regulation of power without scram is mainly due to the inherent negative reactivity feedback in conjunction with the large thermal inertia of the primary heat transport system and the passive decay heat removal. Such favorable inherent and passive safety behaviors of G4SFR are expected to virtually exclude the probability of severe accidents with potential for core damage

  14. A Qualitative Assessment of Diversion Scenarios for an Example Sodium Fast Reactor Using the GEN IV PR and PP Methodology

    International Nuclear Information System (INIS)

    Zentner, Michael D.; Coles, Garill A.; Therios, Ike

    2012-01-01

    FAST REACTORS;NUCLEAR ENERGY;NUCLEAR MATERIALS MANAGEMENT;PROLIFERATION;SAFEGUARDS;THEFT; A working group was created in 2002 by the Generation IV International Forum (GIF) for the purpose of developing an internationally accepted methodology for assessing the Proliferation Resistance of a nuclear energy system (NES) and its individual elements. A two year case study is being performed by the experts group using this methodology to assess the proliferation resistance of a hypothetical NES called the Example Sodium Fast Reactor (ESFR). This work demonstrates how the PR and PP methodology can be used to provide important information at various levels of details to NES designers, safeguard administrators and decision makers. The study analyzes the response of the complete ESFR nuclear energy system to different proliferation and theft strategies. The challenges considered include concealed diversion, concealed misuse and 'break out' strategies. This paper describes the work done in performing a qualitative assessment of concealed diversion scenarios from the ESFR.

  15. Training Courses in Support of GEN-IV Development – The Case of SVBR Technology

    International Nuclear Information System (INIS)

    Kondaurov, A.; Zaitseva, N.; Yunikova, A.; Artisiuk, V.

    2014-01-01

    Conclusions: For prototype nuclear power reactor the development of training materials requires high level expertise from the R&D side. The First International Course focusing the SVBR technology was developed and piloted in ROSATOM Central Institute for Continuing Education&Training to support HRD for Open Joint-Stock Company «AKME-engineering» - owner and operator of SVBR-100. The Course is available for international participants

  16. A Stochastic Proof of the Resonant Scattering Kernel and its Applications for Gen IV Reactors Type

    International Nuclear Information System (INIS)

    Becker, B.; Dagan, R.; Broeders, C.H.M.; Lohnert, G.

    2008-01-01

    Monte Carlo codes such as MCNP are widely accepted as almost-reference for reactor analysis. The Monte Carlo Code should therefore use as few as possible approximations in order to produce 'experimental-level' calculations. In this study we deal with one of the most problematic approximations done in MCNP in which the resonances are ignored for the secondary neutron energy distribution, namely the change of the energy and angular direction of the neutron after interaction with a heavy isotope with pronounced resonances. The endeavour of exploiting the influence of the resonances on the scattering kernel goes back to 1944 where E. Wigner and J. Wilkins developed the first temperature dependent scattering kernel. However only in 1998, the full analytical solution for the double differential resonant dependent scattering kernel was suggested by W. Rothenstein and R. Dagan. An independent stochastic approach is presented for the first time to confirm the above analytical kernel with a complete different methodology. Moreover, by manipulating in a subtle manner the scattering subroutine COLIDN of MCNP, it is proven that this very subroutine is, to some extent, inappropriate as well as the relevant explanation in the MCNP manual. The impact of this improved resonance dependent scattering kernel on diverse types of reactors, in particular for the Generation IV innovative core design HTR, is shown to be significant. (authors)

  17. Status of the French R/D program on the severe accident issue to develop Gen IV SFRs - 15373

    International Nuclear Information System (INIS)

    Serre, F.; Bertrand, F.; Journeau, C.; Suteau, C.; Verwaede, D.; Schmitt, D.; Farges, B.

    2015-01-01

    The ASTRID reactor (Advanced Sodium Technological Reactor for Industrial Demonstration) is a technological demonstrator designed by the CEA with its industrial partners, with very high levels of requirements. In the ASTRID project, the safety objectives are to prevent core melting, in particular by the development of an innovative core with complementary safety prevention devices, and to enhance the reactor resistance to severe accident by design. To mitigate the consequences of hypothetical core melting situations, specific dispositions or mitigation devices will be added to the core and to the reactor. It is also required to provide a robust safety demonstration (with high level of confidence). Therefore a new approach for severe accident issue has been defined: to the well-known 'lines of defense' method, a 'lines of mitigation' method is added. To meet these ASTRID, or future SFR, requirements, a large R/D program was launched in the Severe Accident domain, with a large number of partners. This paper will present the status of the CEA R/D related to the SFR Severe Accident issue, the collaboration framework (with industrial partners and R/D foreign organizations), and the future R/D plans to support the ASTRID project and possible developments for future Gen IV commercial SFR. (authors)

  18. Uranium enrichment reduction in the Prototype Gen-IV sodium-cooled fast reactor (PGSFR) with PBO reflector

    Energy Technology Data Exchange (ETDEWEB)

    Hartanto, Donny; Kim, Chi Hyung; Kim, Yong Hee [Dept. of Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology (KAIST), Daejeon (Korea, Republic of)

    2016-04-15

    The Korean Prototype Gen-IV sodium-cooled fast reactor (PGSFR) is supposed to be loaded with a relatively-costly low-enriched U fuel, while its envisaged transuranic fuels are not available for transmutation. In this work, the U-enrichment reduction by improving the neutron economy is pursued to save the fuel cost. To improve the neutron economy of the core, a new reflector material, PbO, has been introduced to replace the conventional HT9 reflector in the current PGSFR core. Two types of PbO reflectors are considered: one is the conventional pin-type and the other one is an inverted configuration. The inverted PbO reflector design is intended to maximize the PbO volume fraction in the reflector assembly. In addition, the core radial configuration is also modified to maximize the performance of the PbO reflector. For the baseline PGSFR core with several reflector options, the U enrichment requirement has been analyzed and the fuel depletion analysis is performed to derive the equilibrium cycle parameters. The linear reactivity model is used to determine the equilibrium cycle performances of the core. Impacts of the new PbO reflectors are characterized in terms of the cycle length, neutron leakage, radial power distribution, and operational fuel cost.

  19. Enhanced radiation resistance through interface modification of nano-structured steels for Gen IV in-core applications

    International Nuclear Information System (INIS)

    Jang, Jinsung; Kang, Suk Hoon; Kim, Min Chul

    2013-06-01

    This project is to increase radiation tolerance of candidate alloys for Gen IV core component through the optimization of grain size and grain boundary characteristics. The focus is on nanocrystalline metal alloys with a fcc crystal structure. The long-term goal is to design and develop bulk nanostructured austenitic steels with enhanced void swelling resistance and substantial ductility, and to enhance their creep resistance at elevated temperatures via grain boundary engineering. An austenitic stainless steel, HT-UPS (high temperature ultra-fine precipitates strengthened) was developed at ORNL, and is expected to show enhanced void swelling resistance through the trapping of point defects at nanometer-sized carbides. Reducing the grain size and increasing the fraction-induced point defects (due to the increased sink area of the grain boundaries), to make bubble nucleation at the boundaries less likely (by reducing the fraction of high-energy boundaries), and to improve the strength and ductility under radiation by producing a higher density of nanometer sized carbides on the boundaries

  20. Preliminary Comparative Evaluation Study on Reference Design of GEN-IV SFR

    Energy Technology Data Exchange (ETDEWEB)

    Sim, Yoon Sub; Kim, Yeong Il; Hong, Ser Gi (and others)

    2005-11-15

    A fast reactor has a good transmutation capability and it enables breeding of fuel and use of a closed fuel cycle. By these characteristics of a fast reactor, the limited uranium resources of the world can be much more effectively utilized and the nuclear wastes of a high level of radioactivity and toxicity from the current nuclear power reactors of LWRs and HWRs can be drastically reduced in its volume and the management of the wastes can be easily treated. Also electricity can be generated more effectively since a fast reactor has the feature of high operation temperature. These features of a fast reactor makes it inevitable on a long term basis to construct fast reactors in Korea. The domestic fast reactor technology level, however, is at the level of coming out of a beginning stage and needs utilization of international expertise. Recently an international cooperation program called GIF has been formulated and our KALIMER was selected as one of the two reference designs for the international joint R and D works with JSFR of Japan. In the current frame of the GIF program, the two selected reference designs are supposed to be evaluated against each other in future and one design is to be finally selected. To make the international cooperation program directed more useful to our fast reactor technology development, it is required to strengthen the competitiveness of KALIMER so that it can be selected. To meet the necessity, a study was made in this research for pre-evaluation of the GIF reference designs and setting up plans for development of designs and technology that will enhance the competitiveness of KALIMER.

  1. Project planning of Gen-IV sodium cooled fast reactor technology

    International Nuclear Information System (INIS)

    Yoo, Jaewoon; Joo, H. K.; Cho, C. H.; Kim, Y. G.; Lee, D. U.; Jin, M. W.

    2013-05-01

    The project program will be established to shorten the design schedule by sharing the design man power and experimental facility, and by introducing the proven technology through international collaboration and the project plan including preliminary specific design, technology validation and fuel design validation plan will be more detail by reviewing the plan at the International Technical Review Meeting (ITRM). Periodic project progress review meeting will be held to find the technical issues and to resolve them. The results of the progress review meeting will be reflected into the final assessment of research project. The project progress review meeting will be held every quarter and external expert will also participate in the meeting. In parallel with the PGSFR development, innovative small modular SFR will be developed aiming to the international nuclear market. The system and component technologies of both system can be shared but innovative concept will be implemented into the design. Ultra long life core design concept and supercritical CO 2 Brayton cycle will be considered as the innovative concept for enhancing the plant economy and safety

  2. Millimeter-Wave Thermal Analysis Development and Application to GEN IV Reactor Materials

    Energy Technology Data Exchange (ETDEWEB)

    Wosko, Paul; Sundram, S. K.

    2012-10-16

    New millimeter-wave thermal analysis instrumentation has been developed and studied for characterization of materials required for diverse fuel and structural needs in high temperature reactor environments such as the Next Generation Nuclear Plant (NGNP). A two-receiver 137 GHz system with orthogonal polarizations for anisotropic resolution of material properties has been implemented at MIT. The system was tested with graphite and silicon carbide specimens at temperatures up to 1300 ºC inside an electric furnace. The analytic and hardware basis for active millimeter-wave radiometry of reactor materials at high temperature has been established. Real-time, non contact measurement sensitivity to anisotropic surface emissivity and submillimeter surface displacement was demonstrated. The 137 GHz emissivity of reactor grade graphite (NBG17) from SGL Group was found to be low, ~ 5 %, in the 500 – 1200 °C range and increases by a factor of 2 to 4 with small linear grooves simulating fracturing. The low graphite emissivity would make millimeter-wave active radiometry a sensitive diagnostic of graphite changes due to environmentally induced stress fracturing, swelling, or corrosion. The silicon carbide tested from Ortek, Inc. was found to have a much higher emissivity at 137 GHz of ~90% Thin coatings of silicon carbide on reactor grade graphite supplied by SGL Group were found to be mostly transparent to millimeter-waves, increasing the 137 GHz emissivity of the coated reactor grade graphite to about ~14% at 1250 ºC.

  3. Project planning of Gen-IV sodium cooled fast reactor technology

    Energy Technology Data Exchange (ETDEWEB)

    Yoo, Jaewoon; Joo, H. K.; Cho, C. H.; Kim, Y. G.; Lee, D. U.; Jin, M. W.

    2013-05-15

    The project program will be established to shorten the design schedule by sharing the design man power and experimental facility, and by introducing the proven technology through international collaboration and the project plan including preliminary specific design, technology validation and fuel design validation plan will be more detail by reviewing the plan at the International Technical Review Meeting (ITRM). Periodic project progress review meeting will be held to find the technical issues and to resolve them. The results of the progress review meeting will be reflected into the final assessment of research project. The project progress review meeting will be held every quarter and external expert will also participate in the meeting. In parallel with the PGSFR development, innovative small modular SFR will be developed aiming to the international nuclear market. The system and component technologies of both system can be shared but innovative concept will be implemented into the design. Ultra long life core design concept and supercritical CO{sub 2} Brayton cycle will be considered as the innovative concept for enhancing the plant economy and safety.

  4. Minor actinides transmutation potential: state of art for GEN IV sodium cooled fast reactors

    International Nuclear Information System (INIS)

    Buiron, Laurent

    2015-01-01

    In the frame of the R and D program relative to the 1991 French act on nuclear waste management, fast neutron systems have shown relevant characteristics that meet both requirements on sustainable resources management and waste minimization. They also offer flexibility by mean of burner or breeder configurations allowing mastering plutonium inventory without significant impact on core safety. From the technological point of view, sodium cooled fast reactor are considered in order to achieve mean term industrial deployment. The present document summaries the main results of R and D program on minor actinides transmutation in sodium fast reactor since 2006 following recommendation of the first part of the 1991 French act. Both homogeneous and heterogeneous management achievable performances are presented for 'evolutionary' SFR V2B core as well as low void worth CFV core for industrial scale configurations (1500 MWe). Minor actinides transmutation could be demonstrated in the ASTRID reactor with the following configurations: - a 2%vol Americium content for the homogeneous mode, - a 10%vol Americium content for the heterogeneous mode, without any substantial modification of the main core safety parameters and only limited impacts on the associated fuel cycle (manufacturing issues are not considered here). In order to achieve such goal, a wide range of experimental irradiations driven by transmutation scenarios have to be performed for both homogeneous and heterogeneous minor actinides management. (author) [fr

  5. A Qualitative Assessment Of Diversion Scenarios For A Example Sodium Fast Reactor Using The Gen IV PR And PP Methodology

    International Nuclear Information System (INIS)

    Zentner, Michael D.

    2008-01-01

    A working group was created in 2002 by the Generation IV International Forum (GIF) for the purpose of developing an internationally accepted methodology for assessing the Proliferation Resistance of a nuclear energy system (NES) and its individual elements. A two year case study is being performed by the experts group using this methodology to assess the proliferation resistance of a hypothetical NES called the Example Sodium Fast Reactor (ESFR). This work demonstrates how the PR and PP methodology can be used to provide important information at various levels of details to NES designers, safeguard administrators and decision makers. The study analyzes the response of the complete ESFR nuclear energy system to different proliferation and theft strategies. The challenges considered include concealed diversion, concealed misuse and 'break out' strategies. This paper describes the work done in performing a qualitative assessment of concealed diversion scenarios from the ESFR.

  6. NOMAGE4 activities 2011. Part I, Nordic Nuclear Materials Forum for Generation IV Reactors: Status and activities in 2011

    International Nuclear Information System (INIS)

    Van Nieuwenhove, R.

    2012-01-01

    A network for materials issues has been initiated in 2009 within the Nordic countries. The original objectives of the Generation IV Nordic Nuclear Materials Forum (NOMAGE4) were to form the basis of a sustainable forum for Gen-IV issues, especially focusing on fuels, cladding, structural materials and coolant interaction. Over the last years, other issues such as reactor physics, thermal hydraulics, safety and waste have gained in importance (within the network) and therefore the scope of the forum has been enlarged and a more appropriate and more general name, NORDIC-GEN4, has been chosen for the forum. Further, the interaction with non-Nordic countries (such as The Netherlands (JRC, NRG) and Czech Republic (CVR)) will be increased. Within the NOMAGE4 project, a seminar was organized by IFE-Halden during 31 October - 1 November 2011. The seminar attracted 65 participants from 12 countries. The seminar provided a forum for exchange of information, discussion on future research reactor needs and networking of experts on Generation IV reactor concepts. The participants could also visit the Halden reactor site and the workshop. (Author)

  7. NOMAGE4 activities 2011. Part I, Nordic Nuclear Materials Forum for Generation IV Reactors: Status and activities in 2011

    Energy Technology Data Exchange (ETDEWEB)

    Van Nieuwenhove, R. (Institutt for Energiteknikk, OECD Halden Reactor Project (Norway))

    2012-01-15

    A network for materials issues has been initiated in 2009 within the Nordic countries. The original objectives of the Generation IV Nordic Nuclear Materials Forum (NOMAGE4) were to form the basis of a sustainable forum for Gen-IV issues, especially focusing on fuels, cladding, structural materials and coolant interaction. Over the last years, other issues such as reactor physics, thermal hydraulics, safety and waste have gained in importance (within the network) and therefore the scope of the forum has been enlarged and a more appropriate and more general name, NORDIC-GEN4, has been chosen for the forum. Further, the interaction with non-Nordic countries (such as The Netherlands (JRC, NRG) and Czech Republic (CVR)) will be increased. Within the NOMAGE4 project, a seminar was organized by IFE-Halden during 31 October - 1 November 2011. The seminar attracted 65 participants from 12 countries. The seminar provided a forum for exchange of information, discussion on future research reactor needs and networking of experts on Generation IV reactor concepts. The participants could also visit the Halden reactor site and the workshop. (Author)

  8. Theoretical analysis of nuclear reactors (Phase I), I-V, Part IV, Nuclear fuel depletion

    International Nuclear Information System (INIS)

    Pop-Jordanov, J.

    1962-07-01

    Nuclear fuel depletion is analyzed in order to estimate the qualitative and quantitative fuel property changes during irradiation and the influence of changes on the reactivity during long-term reactor operation. The changes of fuel properties are described by changes of neutron absorption and fission cross sections. Part one of this report covers the economic significance of fuel burnup and the review of fuel isotopic changes during depletion. Pat two contains the analysis of the U 235 chain, analytical expressions for the concentrations of U 235 , U 236 and Np 237 as a function of burnup. Part three contains the analysis of neutron spectrum influence on the Westcott method for calculating the cross sections. Part four contains the calculation method applied on Calder Hall type reactor. The results were obtained by applying ZUSE-22 R digital computer

  9. Fluidized bed nuclear reactor as a IV generation reactor

    International Nuclear Information System (INIS)

    Sefidvash, Farhang

    2002-01-01

    The object of this paper is to analyze the characteristics of the Fluidized Bed Nuclear Reactor (FBNR) concept under the light of the requirements set for the IV generation nuclear reactors. It is seen that FBNR generally meets the goals of providing sustainable energy generation that meets clean air objectives and promotes long-term availability of systems and effective fuel utilization for worldwide energy production; minimize and manage their nuclear waste and notably reduce the long term stewardship burden in the future, thereby improving protection for the public health and the environment; increase the assurance that it is a very unattractive and least desirable route for diversion or theft of weapons-usable materials; excel in safety and reliability; have a very low likelihood and degree of reactor core damage; eliminate the need for offsite emergency response; have a clear life-cycle cost advantage over other energy sources; have a level of financial risk comparable to other energy projects. The other advantages of the proposed design are being modular, low environmental impact, exclusion of severe accidents, short construction period, flexible adaptation to demand, excellent load following characteristics, and competitive economics. (author)

  10. The web-enabled database of JRC-EC, a useful tool for managing European Gen IV materials data

    International Nuclear Information System (INIS)

    Over, H.H.; Dietz, W.

    2008-01-01

    Materials and document databases are important tools to conserve knowledge and experimental materials data of European R and D projects. A web-enabled application guarantees a fast access to these data. In combination with analysis tools the experimental data are used for e.g. mechanical design, construction and lifetime predictions of complex components. The effective and efficient handling of large amounts of generic and detailed materials data with regard to properties related to e.g. fabrication processes, joining techniques, irradiation or aging is one of the basic elements of data management within ongoing nuclear safety and design related European research projects and networks. The paper describes the structure and functionality of Mat-DB and gives examples how these tools can be used for the management and evaluation of materials data of European (national or multi-national) R and D activities or future reactor types such as the EURATOM FP7 Generation IV reactor types or the heavy liquid metals cooled reactor

  11. Divergencia genética en poblaciones peruanas detectada a partir de las frecuencias haplotípicas del mtDNA y del gen nuclear MBL

    Directory of Open Access Journals (Sweden)

    Jesús H. Córdova

    2011-01-01

    Full Text Available Objetivos: Avanzar en el conocimiento del origen de las poblaciones peruanas estudiadas en un contexto filogeográfico. Diseño: Estudio genético poblacional. Instituciones: Laboratorio de Genética Humana, Facultad de Ciencias Biológicas, Universidad Nacional Mayor de San Marcos, e Instituto de Genética y Biología Molecular, Facultad de Medicina, Universidad San Martín de Porras, Lima, Perú. Participantes: Siete poblaciones peruanas. Metodología: Análisis comparativo de los resultados a partir del estudio del mtDNA y el gen nuclear MBL de siete poblaciones peruanas, procesados de manera separada y luego combinados, utilizando el programa PHYLYP 3.65, para obtener valores FST de diferenciación genética y la construcción de árboles de distancias por aplicación del algorritmo UPGMA y el análisis subsecuente de los agrupamientos (clusters generados. Principales medidas de resultados: Árboles genéticos generados. Resultados: De manera separada, los árboles generados para cada marcador genético tuvieron topologías propias y diferentes entre sí. Procesados de manera combinada, el árbol resultante demostró que los mayores valores de diferenciación genética se hallaron en las Islas del Lago Titicaca (Puno, Perú conocidas -Taquile, Amantani y Anapia-, que fue calificada como muy alta, porque mostró valores de FST de 0.3113, 0.2949 y 0.3348 respecto de las poblaciones estudiadas, tanto fuera del Departamento de Puno -como Chachapoyas, Pucallpa y Chiclayo, respectivamente-, así como a la de los Uro del mismo Puno y del mismo Lago Titicaca (0.2837. Fuera de Puno, el par de poblaciones Chachapoyas-Pucallpa fue el menos divergente, al alcanzar entre ellas un valor de FST de 0.0108, calificándosele de pequeña. Conclusiones: El árbol obtenido del procesamiento de los marcadores vía una matriz combinada demostró que las poblaciones que habitan las islas de Taquile, Amantani y Anapia, divergen notablemente de las restantes cuatro

  12. Irradiation of Parts of the X-Gen Nuclear Fuel Assembly made by KNF in HANARO

    International Nuclear Information System (INIS)

    Choo, K. N.; Cho, M. S.; Shin, Y. T.; Kim, B. G.; Lee, S. H.; Eom, K. B.

    2008-01-01

    An instrumented capsule has been developed at HANARO (High flux Advanced Neutron Application ReactOr) for the neutron irradiation tests of materials. The capsule system has been actively utilized for the various material irradiation tests requested by users from research institutes, universities, and the industries. As a preliminary test, some specimens made of the parts of a nuclear fuel assembly were inserted in the 05M-07U instrumented capsule and successfully irradiated at HANARO. Based on the results and experience, a new irradiation capsule of 07M-13N was designed, fabricated, and irradiated at HANARO for the evaluation of the neutron irradiation properties of the parts of the X-Gen nuclear fuel assembly made by KNF (Korea Nuclear Fuel). Specimens such as bucking and spring test specimens of spacer grid, microstructure and tensile test specimens of welded parts, tensile, irradiation growth and spring test specimens made of HANA tube, Zirlo, Zircaloy-4 and Inconel-718 were placed in the capsule. The capsule was loaded into the CT test hole of HANARO of a 30MW thermal output and the specimens were irradiated at 295 - 460 .deg. C up to a fast neutron fluence of 1.2x10 21 (n/cm 2 ) (E>1.0MeV)

  13. Generation IV nuclear energy systems: road map and concepts. 2. Generation II Measurement Systems for Generation IV Nuclear Power Plants

    International Nuclear Information System (INIS)

    Miller, Don W.

    2001-01-01

    need for substantial research. As we consider I and C systems in Generation IV reactors, we have the opportunity to take a much less 'timid' design philosophy than was taken in the design of I and C systems in the ALWRs. We need to make use of advanced technology to design an I and C system for the Generation IV multi-unit plant designs currently being considered. Such a design should accomplish the following: 1. provides for multi-unit control; 2. contributes to a plant design objective of a very low core damage frequency; 3. maximizes plant thermal efficiency (>50%); 4. maximizes plant capacity factor (>90%); 5. optimizes operability; 6. maximizes maintainability; 7. provides for on-line monitoring, calibration, and diagnostics; 8. provides optimum response to disturbances; 9. provides excellent load-following capability. When we consider the current situation in operating Generation I and II nuclear power plants and even Generation III ALWR design, we conclude that Generation IV reactors should employ at least Generation II measurement systems. Let us first consider data transmission, which is a form of communication, and ask the question: Do new communication-transferring methods by electrons flow in copper wires? The obvious answer is no. Virtually all new communication systems are using some electromagnetic method, such as light, microwaves, HF or VHF radio signals, and virtually no copper wires. When we envision Generation IV nuclear power plants, we should minimize the use of copper wires for data transmission. We should transmit data primarily by fiber optics and various wireless methods, some of which can penetrate thick barriers. Now let us consider sensors. If we use light for data transmission, then we should also use optical-based sensors. We should also take advantage of microprocessors, which provide opportunities to embed 'intelligence' in the sensor that can be used to increase accuracy, stability, and tolerance to external stressors (i.e., radiation

  14. Progress in the development of the neutron flux monitoring system of the French GEN-IV SFR: simulations and experimental validations [ANIMMA--2015-IO-392

    Energy Technology Data Exchange (ETDEWEB)

    Jammes, C.; Filliatre, P.; Izarra, G. de [CEA, DEN, Cadarache, Reactor Studies Department, 13108 Saint-Paul-lez-Durance (France); Elter, Zs. [CEA, DEN, Cadarache, Reactor Studies Department, 13108 Saint-Paul-lez-Durance (France); Chalmers University of Technology, Department of Applied Physics, Division of Nuclear Engineering, SE-412 96 Goeteborg (Sweden); Verma, V. [CEA, DEN, Cadarache, Reactor Studies Department, 13108 Saint-Paul-lez-Durance (France); Uppsala University, Division of Applied Nuclear Physics, Box 516, SE-75120 Uppsala (Sweden); Hamrita, H.; Bakkali, M. [CEA, DRT, LIST, Metrology, Instrumentation and Information Department, Saclay, 91191 Gif-sur-Yvette (France); Chapoutier, N.; Scholer, A.C.; Verrier, D. [AREVA NP, 10 rue Juliette Recamier F-69456 Lyon (France); Hellesen, C.; Jacobsson, S. [Uppsala University, Division of Applied Nuclear Physics, Box 516, SE-75120 Uppsala (Sweden); Pazsit, I. [Chalmers University of Technology, Department of Applied Physics, Division of Nuclear Engineering, SE-412 96 Goeteborg (Sweden); Cantonnet, B.; Nappe, J.C. [PHOTONIS France, Nuclear Instrumentation, 19100 Brive-la-Gaillarde (France); Molinie, P.; Dessante, P.; Hanna, R.; Kirkpatrick, M.; Odic, E. [Supelec, Energy Department, 3 rue Joliot-Curie, 91191 Gif-sur-Yvette (France)

    2015-07-01

    France has a long experience of about 50 years in designing, building and operating sodium-cooled fast reactors (SFR) such as RAPSODIE, PHENIX and SUPER PHENIX. Fast reactors feature the double capability of reducing nuclear waste and saving nuclear energy resources by burning actinides. Since this reactor type is one of those selected by the Generation IV International Forum, the French government asked, in the year 2006, CEA, namely the French Alternative Energies and Atomic Energy Commission, to lead the development of an innovative GEN-IV nuclear- fission power demonstrator. The major objective is to improve the safety and availability of an SFR. The neutron flux monitoring (NFM) system of any reactor must, in any situation, permit both reactivity control and power level monitoring from startup to full power. It also has to monitor possible changes in neutron flux distribution within the core region in order to prevent any local melting accident. The neutron detectors will have to be installed inside the reactor vessel because locations outside the vessel will suffer from severe disadvantages; radially the neutron shield that is also contained in the reactor vessel will cause unacceptable losses in neutron flux; below the core the presence of a core-catcher prevents from inserting neutron guides; and above the core the distance is too large to obtain decent neutron signals outside the vessel. Another important point is to limit the number of detectors placed in the vessel in order to alleviate their installation into the vessel. In this paper, we show that the architecture of the NFM system will rely on high-temperature fission chambers (HTFC) featuring wide-range flux monitoring capability. The definition of such a system is presented and the justifications of technological options are brought with the use of simulation and experimental results. Firstly, neutron-transport calculations allow us to propose two in-vessel regions, namely the above-core and under

  15. Irradiation Test in HANARO of the Parts of an X-Gen Nuclear Fuel Assembly

    Energy Technology Data Exchange (ETDEWEB)

    Choo, K. N.; Kim, B. G.; Kang, Y. H. (and others)

    2008-08-15

    An instrumented capsule of 07M-13N was designed, fabricated and irradiated for an evaluation of the neutron irradiation properties of the parts of an X-Gen nuclear fuel assembly for PWR requested by KNF. Some specimens requested by Westinghouse Co. and Hanyang university were also inserted. 389 KNF specimens such as bucking and spring test specimens of 1x1 cell spacer grid, tensile, microstructure and tensile of welded parts, irradiation growth, spring test specimens made of HANA tube, Zirlo, Zircaloy-4, Inconel-718 were placed in the capsule. The capsule was composed of 5 stages having many kinds of specimens and an independent electric heater at each stage. During the irradiation test, the temperature of the specimens and the thermal/fast neutron fluences were measured by 14 thermocouples and 7 sets of Ni-Ti-Fe (2 sets contain additional Nb-Ag) neutron fluence monitors installed in the capsule. The capsule was irradiated for 59.19days (4 cycles) in the CT test hole of HANARO of a 30MW thermal output at 300 {approx} 420 .deg. C(for KNF specimens) up to a fast neutron fluence of 1.27x10{sup 21}(n/cm{sup 2}) (E>1MeV). After an irradiation test, the main body of the capsule was cut off at the bottom of the protection tube with a cutting system and it was transported to the IMEF (Irradiated Materials Examination Facility). The irradiated specimens were tested to evaluate the irradiation performance of the parts of an X-Gen fuel assembly in the IMEF hot cell.

  16. Gens Fera. The Wild men in the system of border decoration of the Bible of Wenceslas IV

    Czech Academy of Sciences Publication Activity Database

    Studničková, Milada

    2014-01-01

    Roč. 62, č. 3 (2014), s. 214-239 ISSN 0049-5123 R&D Projects: GA ČR GA13-39192S Institutional support: RVO:68378033 Keywords : book illumination * Bible of Wenceslas IV Subject RIV: AL - Art, Architecture, Cultural Heritage http://www.umeni-art.cz/admin/fileGet.aspx?v=issue-issue-2267-category-2268-paragraph-2269-pdf&l=cz

  17. Generation of multigroup cross sections from ENDF/B-IV nuclear data library

    International Nuclear Information System (INIS)

    Chapot, J.L.C.; Thome Filho, Z.D.

    1980-04-01

    The generation of nuclear data compacted in energy groups is made. The nuclear data library ENDF/B-IV, Evaluated Nuclear Data File, and the new version of the codes ETOG-3 and ETOT-3 are utilized. The data obtained are compared with data from other sources. (L.F.) [pt

  18. Some consideration on nuclear power development. Topics aroused by U.S. proposed 'Generation IV Nuclear Power System

    International Nuclear Information System (INIS)

    Wang Chuanying; Chen Shiqi

    2001-01-01

    U.S. proposed 'Generation IV Nuclear Power System' concept. Its origin and proposed goals for it are analyzed; goals are compared with requirements of URD. In particular, discussed issues on nuclear fuel cycle and Non-proliferation. A well-considered nuclear power development plan, paying close attention to international trend and considering comprehensively domestic situation, is expected

  19. Thermodynamic Data to Model the Interaction Between Coolant and Fuel in Gen IV Sodium Cooled Fast Reactors

    International Nuclear Information System (INIS)

    Dinsdale, Alan; Gisby, John; Davies, Hugh; Konings, Rudy; Benes, Ondrej

    2013-06-01

    Understanding the behaviour of nuclear fuels in various environments is vital to the design and safe operation of nuclear reactors. While this is true if the reactor is operating within its design specification, it is even more so if accidents occur and the fuel is exposed to unexpected temperatures, pressures or chemical environments. It is clearly hazardous and costly to explore all such scenarios experimentally and therefore it is necessary to undertake modelling where possible using well-grounded theoretical approaches. This paper will show examples of where calculations of chemical and phase equilibria have been applied successfully to the long term storage of nuclear waste, phase formation during core meltdown and prediction of fission product release into the atmosphere. It will also highlight the development of thermodynamic data carried out during the European Metrology Research Project Metrofission required to model the potential interaction between the coolant, nuclear fuel, containment materials and atmosphere of a sodium cooled fast reactor. (authors)

  20. Key Factors for the Linkage Strategy between R and D and Commercialization for Gen-ΙV

    International Nuclear Information System (INIS)

    Lee, Kyoungmi; Hong, Jung Suk

    2013-01-01

    The Fukushima nuclear disaster has leaded to enhance the safety and the cost-effectiveness of technology for the future so that advanced countries such as United Sates and France have concerned about a next generation nuclear power plant, Gen-IV(Generation-IV Reactor). Considering various characteristics of nuclear R and D, it is necessary to have more elaborated strategies for the effective development of the next generation of nuclear technology. In this study, we suggest 5 key factors for the successful commercialization of Gen-IV by analyzing the distinct characteristics of nuclear R and D with Gen-IV and CSF(Critical Success Factor)s of several cases in these field and conducting the FGI(Focus Group Interview). Considering these results, we could find and suggest some important points for further strategy for Gen-IV. That is, following five key factors for the linkage improvement between R and D and commercialization of Gen-IV should be considered: the participation of nuclear power plant operators from the beginning, the establishment of consistent and comprehensive plan/roadmap/detailed strategy, the technology development based on global energy issues and international cooperation, the stable and clear funding plans for long-term projects, the cooperation of relative ministries. Gen-IV system is getting a positive response in that it accompanies long-term R and D plans in Korea. We think that the standard of Gen-IV would lead the next generation of nuclear industry if the proper strategy for the cooperation between the private sector and the regulation from the beginning. Moreover, we expect that this study will facilitate its development process from R and D to commercialization

  1. Key Factors for the Linkage Strategy between R and D and Commercialization for Gen-ΙV

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Kyoungmi; Hong, Jung Suk [Korean Institute of S and T Evaluation and Planning, Seoul (Korea, Republic of)

    2013-05-15

    The Fukushima nuclear disaster has leaded to enhance the safety and the cost-effectiveness of technology for the future so that advanced countries such as United Sates and France have concerned about a next generation nuclear power plant, Gen-IV(Generation-IV Reactor). Considering various characteristics of nuclear R and D, it is necessary to have more elaborated strategies for the effective development of the next generation of nuclear technology. In this study, we suggest 5 key factors for the successful commercialization of Gen-IV by analyzing the distinct characteristics of nuclear R and D with Gen-IV and CSF(Critical Success Factor)s of several cases in these field and conducting the FGI(Focus Group Interview). Considering these results, we could find and suggest some important points for further strategy for Gen-IV. That is, following five key factors for the linkage improvement between R and D and commercialization of Gen-IV should be considered: the participation of nuclear power plant operators from the beginning, the establishment of consistent and comprehensive plan/roadmap/detailed strategy, the technology development based on global energy issues and international cooperation, the stable and clear funding plans for long-term projects, the cooperation of relative ministries. Gen-IV system is getting a positive response in that it accompanies long-term R and D plans in Korea. We think that the standard of Gen-IV would lead the next generation of nuclear industry if the proper strategy for the cooperation between the private sector and the regulation from the beginning. Moreover, we expect that this study will facilitate its development process from R and D to commercialization.

  2. ASAMPSA2 best-practices guidelines for L2 PSA development and applications. Volume 3 - Extension to Gen IV reactors

    International Nuclear Information System (INIS)

    Bassi, C.; Bonneville, H.; Brinkman, H.; Burgazzi, L.; Polidoro, F.; Vincon, L.; Jouve, S.

    2010-01-01

    The main objective assigned to the Work Package 4 (WP4) of the 'ASAMPSA2' project (EC 7. FPRD) consist in the verification of the potential compliance of L2PSA guidelines based on PWR/BWR reactors (which are specific tasks of WP2 and WP3) with Generation IV representative concepts. Therefore, in order to exhibit potential discrepancies between LWRs and new reactor types, the following work was based on the up-to-date designs of: - The European Fast Reactor (EFR) which will be considered as prototypical of a pool-type Sodium-cooled Fast Reactor (SFR); - The ELSY design for the Lead-cooled Fast Reactor (LFR) technology; - The ANTARES project which could be representative of a Very-High Temperature Reactor (VHTR); - The CEA 2400 MWth Gas-cooled Fast Reactor (GFR). (authors)

  3. Economic, energy and GHG emissions performance evaluation of a WhisperGen Mk IV Stirling engine μ-CHP unit in a domestic dwelling

    International Nuclear Information System (INIS)

    Conroy, G.; Duffy, A.; Ayompe, L.M.

    2014-01-01

    Highlights: • The performance of a Stirling engine MK IV micro-CHP unit was evaluated in a domestic dwelling in Ireland. • The performance of the micro-CHP was compare to that of a condensing gas boiler. • The micro-CHP unit resulted in an annual cost saving of €180 compared to the condensing gas boiler. • Electricity imported from the grid decreased by 20.8% while CO 2 emissions decreased by 16.1%. • The micro-CHP unit used 2889 kW h of gas more than the condensing gas boiler during one year of operation. - Abstract: This paper presents an assessment of the energy, economic and greenhouse gas emissions performances of a WhisperGen Mk IV Stirling engine μ-CHP unit for use in a conventional house in the Republic of Ireland. The energy performance data used in this study was obtained from a field trial carried out in Belfast, Northern Ireland during the period June 2004–July 2005 by Northern Ireland Electricity and Phoenix Gas working in collaboration with Whispertech UK. A comparative performance analysis between the μ-CHP unit and a condensing gas boiler revealed that the μ-CHP unit resulted in an annual cost saving of €180 with an incremental simple payback period of 13.8 years when compared to a condensing gas boiler. Electricity imported from the grid decreased by 20.8% while CO 2 emissions decreased by 16.1%. The μ-CHP unit used 2889 kW h of gas more than the condensing gas boiler

  4. On the safety and performance demonstration tests of Prototype Gen-IV Sodium-Cooled Fast Reactor and validation and verification of computational codes

    International Nuclear Information System (INIS)

    Kim, Jong Bum; Jeong, Ji Young; Lee, Tae Ho; Kim, Sung Kyun; Euh, Dong Jin; Joo, Hyung Kook

    2016-01-01

    The design of Prototype Gen-IV Sodium-Cooled Fast Reactor (PGSFR) has been developed and the validation and verification (V and V) activities to demonstrate the system performance and safety are in progress. In this paper, the current status of test activities is described briefly and significant results are discussed. The large-scale sodium thermal-hydraulic test program, Sodium Test Loop for Safety Simulation and Assessment-1 (STELLA-1), produced satisfactory results, which were used for the computer codes V and V, and the performance test results of the model pump in sodium showed good agreement with those in water. The second phase of the STELLA program with the integral effect tests facility, STELLA-2, is in the detailed design stage of the design process. The sodium thermal-hydraulic experiment loop for finned-tube sodium-to-air heat exchanger performance test, the intermediate heat exchanger test facility, and the test facility for the reactor flow distribution are underway. Flow characteristics test in subchannels of a wire-wrapped rod bundle has been carried out for safety analysis in the core and the dynamic characteristic test of upper internal structure has been performed for the seismic analysis model for the PGSFR. The performance tests for control rod assemblies (CRAs) have been conducted for control rod drive mechanism driving parts and drop tests of the CRA under scram condition were performed. Finally, three types of inspection sensors under development for the safe operation of the PGSFR were explained with significant results

  5. On the safety and performance demonstration tests of Prototype Gen-IV Sodium-Cooled Fast Reactor and validation and verification of computational codes

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jong Bum; Jeong, Ji Young; Lee, Tae Ho; Kim, Sung Kyun; Euh, Dong Jin; Joo, Hyung Kook [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2016-10-15

    The design of Prototype Gen-IV Sodium-Cooled Fast Reactor (PGSFR) has been developed and the validation and verification (V and V) activities to demonstrate the system performance and safety are in progress. In this paper, the current status of test activities is described briefly and significant results are discussed. The large-scale sodium thermal-hydraulic test program, Sodium Test Loop for Safety Simulation and Assessment-1 (STELLA-1), produced satisfactory results, which were used for the computer codes V and V, and the performance test results of the model pump in sodium showed good agreement with those in water. The second phase of the STELLA program with the integral effect tests facility, STELLA-2, is in the detailed design stage of the design process. The sodium thermal-hydraulic experiment loop for finned-tube sodium-to-air heat exchanger performance test, the intermediate heat exchanger test facility, and the test facility for the reactor flow distribution are underway. Flow characteristics test in subchannels of a wire-wrapped rod bundle has been carried out for safety analysis in the core and the dynamic characteristic test of upper internal structure has been performed for the seismic analysis model for the PGSFR. The performance tests for control rod assemblies (CRAs) have been conducted for control rod drive mechanism driving parts and drop tests of the CRA under scram condition were performed. Finally, three types of inspection sensors under development for the safe operation of the PGSFR were explained with significant results.

  6. Small angle neutron scattering study of nano sized microstructure in Fe-Cr ODS steels for gen IV in-core applications.

    Science.gov (United States)

    Han, Young-Soo; Mao, Xiadong; Jang, Jinsung

    2013-11-01

    The nano-sized microstructures in Fe-Cr oxide dispersion strengthened steel for Gen IV in-core applications were studied using small angle neutron scattering. The oxide dispersion strengthened steel was manufactured through hot isostatic pressing with various chemical compositions and fabrication conditions. Small angle neutron scattering experiments were performed using a 40 m small angle neutron scattering instrument at HANARO. Nano sized microstructures, namely, yttrium oxides and Cr-oxides were quantitatively analyzed by small angle neutron scattering. The yttrium oxides and Cr-oxides were also observed by transmission electron microscopy. The microstructural analysis results from small angle neutron scattering were compared with those obtained by transmission electron microscopy. The effects of the chemical compositions and fabrication conditions on the microstructure were investigated in relation to the quantitative microstructural analysis results obtained by small angle neutron scattering. The volume fraction of Y-oxide increases after fabrication, and this result is considered to be due to the formation of non-stochiometric Y-Ti-oxides.

  7. MACKLIB-IV: a library of nuclear response functions generated with the MACK-IV computer program from ENDF/B-IV

    International Nuclear Information System (INIS)

    Gohar, Y.; Abdou, M.A.

    1978-03-01

    MACKLIB-IV employs the CTR energy group structure of 171 neutron groups and 36 gamma groups. A retrieval computer program is included with the library to permit collapsing into any other energy group structure. The library is in the new format of the ''MACK-Activity Table'' which uses a fixed position for each specific response function. This permits the user when employing the library with present transport codes to obtain directly the nuclear responses (e.g. the total nuclear heating) summed for all isotopes and integrated over any geometrical volume. The response functions included in the library are neutron kerma factor, gamma kerma factor, gas production and tritium-breeding functions, and all important reaction cross sections. Pertinent information about the library and a graphical display of six response functions for all materials in the library are given

  8. Innovative designs and technologies of nuclear power. IV International scientific and technical conference. Book of abstracts

    International Nuclear Information System (INIS)

    2016-01-01

    IV International scientific and technical conference “Innovative designs and technologies of nuclear power” has been organized and is conducted by JSC NIKIET with support from Rosatom State Corporation, the International Atomic Energy Agency, the Russian Academy of Sciences and the Nuclear Society of Russia. The conference topics include: innovative designs of nuclear facilities for various applications, nuclear fuel and new materials, closed fuel cycle technologies, SNF and RW management, technological answers to nonproliferation problems, small power reactors (stationary, transportable, floatable, propulsion, space), integrated codes of a new generation for safety analysis of nuclear power plants and fuel cycles, controlled fusion [ru

  9. Nuclear fission today and tomorrow: from renaissance to technological breakthrough (Generation IV)

    International Nuclear Information System (INIS)

    Van Goethem, G.

    2010-01-01

    This paper describes briefly the major scientific and technological challenges related to the very innovative nuclear fission reactor systems to be deployed at the horizon 2040 (called Generation IV). The paper focuses on the benefits of the Generation IV systems, according to criteria or technology goals established at the international level (Generation IV International Forum (GIF)). This goals are drastic improvements on four areas: sustainable development, industrial competitiveness, safety and reliability and proliferation resistance. The focus is on the design objectives and associated research issues that have been agreed upon internationally to meet these four ambitious goals. (author)

  10. On the Safety and Performance Demonstration Tests of Prototype Gen-IV Sodium-Cooled Fast Reactor and Validation and Verification of Computational Codes

    Directory of Open Access Journals (Sweden)

    Jong-Bum Kim

    2016-10-01

    Full Text Available The design of Prototype Gen-IV Sodium-Cooled Fast Reactor (PGSFR has been developed and the validation and verification (V&V activities to demonstrate the system performance and safety are in progress. In this paper, the current status of test activities is described briefly and significant results are discussed. The large-scale sodium thermal-hydraulic test program, Sodium Test Loop for Safety Simulation and Assessment-1 (STELLA-1, produced satisfactory results, which were used for the computer codes V&V, and the performance test results of the model pump in sodium showed good agreement with those in water. The second phase of the STELLA program with the integral effect tests facility, STELLA-2, is in the detailed design stage of the design process. The sodium thermal-hydraulic experiment loop for finned-tube sodium-to-air heat exchanger performance test, the intermediate heat exchanger test facility, and the test facility for the reactor flow distribution are underway. Flow characteristics test in subchannels of a wire-wrapped rod bundle has been carried out for safety analysis in the core and the dynamic characteristic test of upper internal structure has been performed for the seismic analysis model for the PGSFR. The performance tests for control rod assemblies (CRAs have been conducted for control rod drive mechanism driving parts and drop tests of the CRA under scram condition were performed. Finally, three types of inspection sensors under development for the safe operation of the PGSFR were explained with significant results.

  11. Multi-scale approach to the modeling of fission gas discharge during hypothetical loss-of-flow accident in gen-IV sodium fast reactor

    Energy Technology Data Exchange (ETDEWEB)

    Behafarid, F.; Shaver, D. R. [Rensselaer Polytechnic Inst., Troy, NY (United States); Bolotnov, I. A. [North Carolina State Univ., Raleigh, NC (United States); Jansen, K. E. [Univ. of Colorado, Boulder, CO (United States); Antal, S. P.; Podowski, M. Z. [Rensselaer Polytechnic Inst., Troy, NY (United States)

    2012-07-01

    The required technological and safety standards for future Gen IV Reactors can only be achieved if advanced simulation capabilities become available, which combine high performance computing with the necessary level of modeling detail and high accuracy of predictions. The purpose of this paper is to present new results of multi-scale three-dimensional (3D) simulations of the inter-related phenomena, which occur as a result of fuel element heat-up and cladding failure, including the injection of a jet of gaseous fission products into a partially blocked Sodium Fast Reactor (SFR) coolant channel, and gas/molten sodium transport along the coolant channels. The computational approach to the analysis of the overall accident scenario is based on using two different inter-communicating computational multiphase fluid dynamics (CMFD) codes: a CFD code, PHASTA, and a RANS code, NPHASE-CMFD. Using the geometry and time history of cladding failure and the gas injection rate, direct numerical simulations (DNS), combined with the Level Set method, of two-phase turbulent flow have been performed by the PHASTA code. The model allows one to track the evolution of gas/liquid interfaces at a centimeter scale. The simulated phenomena include the formation and breakup of the jet of fission products injected into the liquid sodium coolant. The PHASTA outflow has been averaged over time to obtain mean phasic velocities and volumetric concentrations, as well as the liquid turbulent kinetic energy and turbulence dissipation rate, all of which have served as the input to the core-scale simulations using the NPHASE-CMFD code. A sliding window time averaging has been used to capture mean flow parameters for transient cases. The results presented in the paper include testing and validation of the proposed models, as well the predictions of fission-gas/liquid-sodium transport along a multi-rod fuel assembly of SFR during a partial loss-of-flow accident. (authors)

  12. Exergy analysis for Generation IV nuclear plant optimization

    International Nuclear Information System (INIS)

    Gomez, A.; Azzaro-Pantel, C.; Domenech, S.; Pibouleau, L.; Latge, Ch.; Haubensack, D.; Dumaz, P.

    2010-01-01

    This paper deals with the application of the exergy concept to an energy production system involving a very high temperature reactor coupled with an innovative electricity-generating cycle. The objective is to propose a general approach to quantify exergy destruction of the involved process components, modelled by a thermodynamic simulator (Proceedings of the Conference on High Temperature Reactors, Beijing, China, 22-24 September 2004, International Atomic Agency, Vienna (Austria), HTR-2004; 1-11). The minimization of exergy destruction is then identified as the optimization criterion used in an optimization framework based on a genetic algorithm, in which the model is embedded. Finally, the approach is applied to electrical production by a Brayton-Rankine combined cycle connected to a nuclear reactor. Some typical results are presented. The perspectives of this work including the cogeneration of hydrogen and electricity are highlighted. (authors)

  13. Exergy analysis for Generation IV nuclear plant optimization

    Energy Technology Data Exchange (ETDEWEB)

    Gomez, A.; Azzaro-Pantel, C.; Domenech, S.; Pibouleau, L. [Univ Toulouse, Lab Genie Chim, CNRS, UMR 5503, F-31700 Toulouse 1 (France); Latge, Ch. [CEA Cadarache DEN DTN DIR, St Paul Les Durance, (France); Haubensack, D.; Dumaz, P. [CEA Cadarache DEN DER SESI LCSI, St Paul Les Durance (France)

    2010-07-01

    This paper deals with the application of the exergy concept to an energy production system involving a very high temperature reactor coupled with an innovative electricity-generating cycle. The objective is to propose a general approach to quantify exergy destruction of the involved process components, modelled by a thermodynamic simulator (Proceedings of the Conference on High Temperature Reactors, Beijing, China, 22-24 September 2004, International Atomic Agency, Vienna (Austria), HTR-2004; 1-11). The minimization of exergy destruction is then identified as the optimization criterion used in an optimization framework based on a genetic algorithm, in which the model is embedded. Finally, the approach is applied to electrical production by a Brayton-Rankine combined cycle connected to a nuclear reactor. Some typical results are presented. The perspectives of this work including the cogeneration of hydrogen and electricity are highlighted. (authors)

  14. Technological studies for obtaining lead oxide compacts used in generation IV nuclear reactors

    International Nuclear Information System (INIS)

    Paraschiv, I.; Benga, D.

    2016-01-01

    One of the main concerns of the nuclear research at this moment is the development of the necessary technologies for Generation IV reactors. The main candidate as coolant agent in these reactors is molten lead but this material involves ensuring the oxygen control, due to potential contamination of coolant through the formation of solid oxides and the influence on the corrosion rate of structural parts and for this reason, the oxygen concentration must be kept in a well specified domain. One of the proposed methods for oxygen monitoring and control in the technology of Generation IV reactors, is the use of PbO compacts. For this paper technological tests were performed for developing and setting the optimal parameters in order to attain lead oxide compacts necessary for the oxygen control technology in Generation IV nuclear reactors. (authors)

  15. Technology Road-map Update for Generation IV Nuclear Energy Systems

    International Nuclear Information System (INIS)

    2014-01-01

    This Technology Road-map Update provides an assessment of progress made by the Generation IV International Forum (GIF) in the development of the six systems selected when the original Technology Road-map was published in 2002. More importantly, it provides an overview of the major R and D objectives and milestones for the coming decade, aiming to achieve the Generation IV goals of sustainability, safety and reliability, economic competitiveness, proliferation resistance and physical protection. Lessons learnt from the Fukushima Daiichi nuclear power plant accident are taken into account to ensure that Generation IV systems attain the highest levels of safety, with the development of specific safety design criteria that are applicable across the six systems. Accomplishing the ten-year R and D objectives set out in this new Road-map should allow the more advanced Generation IV systems to move towards the demonstration phase. (authors)

  16. Generation IV Nuclear Energy Systems Ten-Year Program Plan Fiscal Year 2005, Volume 1

    International Nuclear Information System (INIS)

    None

    2005-01-01

    As reflected in the U.S. ''National Energy Policy'', nuclear energy has a strong role to play in satisfying our nation's future energy security and environmental quality needs. The desirable environmental, economic, and sustainability attributes of nuclear energy give it a cornerstone position, not only in the U.S. energy portfolio, but also in the world's future energy portfolio. Accordingly, on September 20, 2002, U.S. Energy Secretary Spencer Abraham announced that, ''The United States and nine other countries have agreed to develop six Generation IV nuclear energy concepts''. The Secretary also noted that the systems are expected to ''represent significant advances in economics, safety, reliability, proliferation resistance, and waste minimization''. The six systems and their broad, worldwide research and development (R and D) needs are described in ''A Technology Roadmap for Generation IV Nuclear Energy Systems'' (hereafter referred to as the Generation IV Roadmap). The first 10 years of required U.S. R and D contributions to achieve the goals described in the Generation IV Roadmap are outlined in this Program Plan

  17. Modeling of Pu(IV) extraction and HNO3 speciation in nuclear fuel reprocessing

    International Nuclear Information System (INIS)

    De-Sio, S.

    2012-01-01

    The PUREX process is a solvent extraction method dedicated to the reprocessing of irradiated nuclear fuel in order to recover pure uranium and plutonium from aqueous solutions of concentrated nitric acid. The tri-n-butylphosphate (TBP) is used as the extractant in the organic phase. The aim of this thesis work was to improve the modeling of liquid-liquid extraction media in nuclear fuel reprocessing. First, Raman and 14 N NMR measurements, coupled with theoretical calculations based on simple solutions theory and BIMSA modeling, were performed in order to get a better understanding of nitric acid dissociation in binary and ternary solutions. Then, Pu(IV) speciation in TBP after extraction from low nitric acid concentrations was investigated by EXAFS and vis-NIR spectroscopies. We were able to show evidence of the extraction of Pu(IV) hydrolyzed species into the organic phase. A new structural study was conducted on An(VI)/TBP and An(IV)/TBP complexes by coupling EXAFS measurements with DFT calculations. Finally, extraction isotherms modeling was performed on the Pu(IV)/HNO 3 /H 2 O/TBP 30%/dodecane system (with Pu at tracer scale) by taking into account deviation from ideal behaviour in both organic and aqueous phases. The best modeling was obtained when considering three plutonium (IV) complexes in the organic phase: Pu(OH) 2 (NO 3 ) 2 (TBP) 2 , Pu(NO 3 ) 4 (TBP) 2 and Pu(NO 3 ) 4 (TBP) 3 . (author) [fr

  18. A spectrophotometric study of cerium IV and chromium VI species in nuclear fuel reprocessing process streams

    International Nuclear Information System (INIS)

    Nickson, I D; Boxall, C; Jackson, A; Whillock, G O H

    2010-01-01

    Nuclear fuel reprocessing schemes such as PUREX and UREX utilise HNO 3 media. An understanding of the corrosion of process engineering materials such as stainless steel in such media is a major concern for the nuclear industry. Two key species are cerium and chromium which, as Ce(IV), Cr(VI), may act as corrosion accelerants. An on-line analytical technique for these quantities would be useful for determining the relationship between corrosion rate and [Ce(IV)] and [Cr(VI)]. Consequently, a strategy for simultaneous quantification of Ce(IV), Cr(VI) and Cr(III) in the presence of other ions found in average burn-up Magnox / PWR fuel reprocessing stream (Fe, Mg, Nd, Al) is being developed. This involves simultaneous UV-vis absorbance measurement at 620, 540, 450 nm, wavelengths where Ce and Cr absorb but other ions do not. Mixed solutions of Cr(VI) and Ce(IV) are found to present higher absorbance values at 540 nm than those predicted from absorbances recorded from single component solutions of those ions. This is attributed to the formation of a 3:1 Cr(VI)-Ce(IV) complex and we report on the complexation and UV-visible spectrophotometric characteristics of this species. To the best of our knowledge this is the first experimental study of this complex in aqueous nitric acid solution systems.

  19. Generation IV SFR Nuclear Reactors: Under Sodium Robotics for ASTRID

    International Nuclear Information System (INIS)

    Jouan-de-Kervenoael, T.; Rey, F.; Baque, F.

    2013-06-01

    For non-removable components of the future ASTRID prototype, repair operations will be performed in a gas environment. If the faulty area is located under the sodium free level, the gas-tight system will have to contain the inspection and repair tools and to protect them from the surrounding liquid sodium. Concerning repair tools, the unique laser tool has been selected for future SFRs: the repair scenario for in-sodium structures will first involve removing the sodium (after bulk draining), then machining and finally welding. Concerning conventional tools (brush or gas blower for sodium removal, milling machine for machining and TIG for welding for which its feasibility was demonstrated in the 1990's) are still considered as a back-up solution. The maintenance of future ASTRID nuclear reactor prototype (inspection, repair) will be performed during shut down periods with some robotic carriers which have to be introduced within the main vessel, in primary 200 deg. C sodium coolant with argon gas cover. Inspection campaigns will be 20 days long. These robots (or carriers) will allow bringing inspection and repairing tools up to concerned components and structures. The needed degrees of freedom associated to these operations will be assumed either directly by the carrier itself or by specifics lower end carrier device for accurate local positioning. Several carriers will be designed, well adapted to specific needs: type of maintenance operation and location of inspection and repair sites. Feedback experience was gained during Superphenix SFR operation with the MIR robot which allowed to successfully make the Non Destructive Examination of main vessel welding joints, the carrier being outside bulk sodium. Operating conditions for the ASTRID robots will be harder from those of the MIR robot: temperature ranging from 180 deg. C to 200 deg. C, radiation dose ranging from 105 to 106 Gy, but mainly direct immersion within liquid sodium coolant. At the design phase of

  20. Mitigation of severe accidents in AREVA's Gen 3+ nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, M., E-mail: manfred.fischer@areva.com; Henning, A.; Surmann, R.

    2014-04-01

    The current AREVA Gen 3+ PWR designs (EPR™ and ATMEA1) are based on the proven defense-in-depth safety concepts inherited from their predecessors, the French “N4” and the German “Konvoi” reactors. Complemented by specific enhancements, including higher redundancy and diversity as well as the use of passive systems, this leads to very low values of the core damage frequency (CDF). Notwithstanding this very low probability, dedicated design measures have been implemented to improve the response of the plant in case of a postulated severe accident (SA) with core melting. This way not only the frequency of large-early-releases (LERF) but also the related radiological consequences are drastically reduced. Situations that potentially lead to high loads that can challenge the short-term integrity of the containment, like RPV melt-through under high pressure, energetic hydrogen/steam explosions, as well as long-term containment failure caused by internal over-pressure are avoided by a combination of preventive measures and dedicated systems. At the example of the EPR{sup TM}, the paper gives an overview of the severe accident mitigation strategy and the related measures and systems of AREVAs current Gen 3+ reactors, with special focus on the function of the core melt stabilization system.

  1. DEVELOPMENT OF RISK-BASED AND TECHNOLOGY-INDEPENDENT SAFETY CRITERIA FOR GENERATION IV SYSTEMS

    Energy Technology Data Exchange (ETDEWEB)

    William E. Kastenberg; Edward Blandford; Lance Kim

    2009-03-31

    This project has developed quantitative safety goals for Generation IV (Gen IV) nuclear energy systems. These safety goals are risk based and technology independent. The foundations for a new approach to risk analysis has been developed, along with a new operational definition of risk. This project has furthered the current state-of-the-art by developing quantitative safety goals for both Gen IV reactors and for the overall Gen IV nuclear fuel cycle. The risk analysis approach developed will quantify performance measures, characterize uncertainty, and address a more comprehensive view of safety as it relates to the overall system. Appropriate safety criteria are necessary to manage risk in a prudent and cost-effective manner. This study is also important for government agencies responsible for managing, reviewing, and for approving advanced reactor systems because they are charged with assuring the health and safety of the public.

  2. DEVELOPMENT OF RISK-BASED AND TECHNOLOGY-INDEPENDENT SAFETY CRITERIA FOR GENERATION IV SYSTEMS

    International Nuclear Information System (INIS)

    Kastenberg, William E.; Blandford, Edward; Kim, Lance

    2009-01-01

    This project has developed quantitative safety goals for Generation IV (Gen IV) nuclear energy systems. These safety goals are risk based and technology independent. The foundations for a new approach to risk analysis has been developed, along with a new operational definition of risk. This project has furthered the current state-of-the-art by developing quantitative safety goals for both Gen IV reactors and for the overall Gen IV nuclear fuel cycle. The risk analysis approach developed will quantify performance measures, characterize uncertainty, and address a more comprehensive view of safety as it relates to the overall system. Appropriate safety criteria are necessary to manage risk in a prudent and cost-effective manner. This study is also important for government agencies responsible for managing, reviewing, and for approving advanced reactor systems because they are charged with assuring the health and safety of the public

  3. Nuclear Energy Center Site Survey, 1975. Part IV. Practical issues of implementation

    International Nuclear Information System (INIS)

    1976-01-01

    The objective of Part IV is to assemble, organize, and present facts, analyses, and responsible viewpoints with respect to issues going beyond technical and technical-economic tradeoff considerations that bear on NECs; to identify options; and to analyze and comment on merits of alternative options. Five broad groups of issues addressed include jurisdictional and institutional; economic; social and political; accident risk; national security; and nuclear material safeguards

  4. Nuclear proliferation and civilian nuclear power: report of the Nonproliferation Alternative Systems Assessment Program. Volume IV. Commercial potential

    International Nuclear Information System (INIS)

    1979-12-01

    Volume IV provides time and cost estimates for positioning new nuclear power systems for commercial deployment. The assessment also estimates the rates at which the new systems might penetrate the domestic market, assuming the continuing viability of the massive light-water reactor network that now exists worldwide. This assessment does not recommend specific, detailed program plans and budgets for individual systems; however, it is clear from this analysis that any of the systems investigated could be deployed if dictated by national interest

  5. Condensation and homogenization of cross sections for the deterministic transport codes with Monte Carlo method: Application to the GEN IV fast neutron reactors

    International Nuclear Information System (INIS)

    Cai, Li

    2014-01-01

    In the framework of the Generation IV reactors neutronic research, new core calculation tools are implemented in the code system APOLLO3 for the deterministic part. These calculation methods are based on the discretization concept of nuclear energy data (named multi-group and are generally produced by deterministic codes) and should be validated and qualified with respect to some Monte-Carlo reference calculations. This thesis aims to develop an alternative technique of producing multi-group nuclear properties by a Monte-Carlo code (TRIPOLI-4). At first, after having tested the existing homogenization and condensation functionalities with better precision obtained nowadays, some inconsistencies are revealed. Several new multi-group parameters estimators are developed and validated for TRIPOLI-4 code with the aid of itself, since it has the possibility to use the multi-group constants in a core calculation. Secondly, the scattering anisotropy effect which is necessary for handling neutron leakage case is studied. A correction technique concerning the diagonal line of the first order moment of the scattering matrix is proposed. This is named the IGSC technique and is based on the usage of an approximate current which is introduced by Todorova. An improvement of this IGSC technique is then presented for the geometries which hold an important heterogeneity property. This improvement uses a more accurate current quantity which is the projection on the abscissa X. The later current can represent the real situation better but is limited to 1D geometries. Finally, a B1 leakage model is implemented in the TRIPOLI-4 code for generating multi-group cross sections with a fundamental mode based critical spectrum. This leakage model is analyzed and validated rigorously by the comparison with other codes: Serpent and ECCO, as well as an analytical case.The whole development work introduced in TRIPOLI-4 code allows producing multi-group constants which can then be used in the core

  6. Modeling by GASP-IV simulation of high-level nuclear waste disposal

    International Nuclear Information System (INIS)

    Kurstedt, H.A. Jr.; DePorter, E.L.; Turek, J.L.; Funk, S.K.; Rasbach, C.E.

    1981-01-01

    High-level nuclear waste generated by defense-oriented and commercial nuclear energy activities are to be stored ultimately in underground repositories. Research continues on the waste-form and waste-form processing. DOE managers must coordinate the results of this research, the capacities and availability times of the permanent geologic storage repositories, and the capacities and availability times of interim storage facilities (pending availability of permanent repositories). Comprehensive and active DOE program-management information systems contain predicted generation of nuclear wastes from defense and commercial activities; milestones on research on waste-forms; and milestones on research and development, design, acquisition, and construction of facilities and repositories. A GASP IV simulation model is presented which interfaces all of these data. The model accepts alternate management decisions; relates all critical milestones, all research and development data, and the generation of waste nuclear materials; simulates the passage of time; then, predicts the impact of those alternate decisions on the availability of storage capacity for waste nuclear materials. 3 references, 3 figures

  7. The SGR Multipurpose - Generation IV - Transportable Cogeneration Nuclear Reactor with Innovative Shielding

    International Nuclear Information System (INIS)

    Pahladsingh, R.R.

    2002-01-01

    Deregulation and liberalization are changing the global energy-markets. At the same time innovative technologies are introduced in the electricity industry; often as a requirement from the upcoming Digital Society. Energy solutions for the future are more seen as a mix of energy-sources for generation-, transmission- and distribution energy-services. The Internet Energy-web based 'Virtual' enterprises are coming up and will gradually change our society. It the fast changing world we have to realize that there will be less time to look for the adequate solutions to anticipate on global developments and the way they will influence our own societies. Global population may reach 9 billion people by 2030; this will put tremendous pressure on energy-, water- and food supply in the global economy. It is time to think about some major issues as described below and come up with the right answers. These are needed on very short term to secure a humane global economic growth and the sustainable global environment. The DOE (Department of Energy - USA) has started the Generation IV initiative for the new generation of nuclear reactors that must lead to much better safety, economics and public acceptance the new reactors. The SGR (Simplified Gas-cooled Reactor) is being proposed as a Generation IV modular nuclear reactor, using graphite pebbles as fuel, whereby an attempt has been made to meet all the DOE requirements, to be used for future nuclear reactors. The focus in this paper is on the changing and emerging global energy-markets and shows some relevant criteria to the nuclear industry and how we can anticipate with improved and new designs towards the coming Digital Society. (author)

  8. Current status of NPP generation IV

    International Nuclear Information System (INIS)

    Yohanes Dwi Anggoro; Dharu Dewi; Nurlaila; Arief Tris Yuliyanto

    2013-01-01

    Today development of nuclear technology has reached the stage of research and development of Generation IV nuclear power plants (advanced reactor systems) which is an innovative development from the previous generation of nuclear power plants. There are six types of power generation IV reactors, namely: Very High Temperature Reactor (VHTR), Sodium-cooled Fast Reactor (SFR), Gas-cooled Fast Reactor (GFR), Lead-cooled Fast Reactor (LFR), Molten Salt Reactor (MSR), and Super Critical Water-cooled Reactor (SCWR). The purpose of this study is to know the development of Generation IV nuclear power plants that have been done by the thirteen countries that are members of the Gen IV International Forum (GIF). The method used is review study and refers to various studies related to the current status of research and development of generation IV nuclear power. The result of this study showed that the systems and technology on Generation IV nuclear power plants offer significant advances in sustainability, safety and reliability, economics, and proliferation resistance and physical protection. In addition, based on the research and development experience is estimated that: SFR can be used optimally in 2015, VHTR in 2020, while NPP types GFR, LFR, MSR, and SCWR in 2025. Utilization of NPP generation IV said to be optimal if fulfill the goal of NPP generation IV, such as: capable to generate energy sustainability and promote long-term availability of nuclear fuel, minimize nuclear waste and reduce the long term stewardship burden, has an advantage in the field of safety and reliability compared to the previous generation of NPP and VHTR technology have a good prospects in Indonesia. (author)

  9. Post-Irradiation Examination Test of the Parts of X-Gen Nuclear Fuel Assembly

    International Nuclear Information System (INIS)

    Ahn, S. B.; Ryu, W. S.; Choo, Y. S.

    2008-08-01

    The mechanical properties of the parts of a nuclear fuel assembly are degraded during the operation of the reactor, through the mechanism of irradiation damage. The properties changes of the parts of the fuel assembly should be quantitatively estimated to ensure the safety of the fuel assembly and rod during the operation. The test techniques developed in this report are used to produce the irradiation data of the grid 1x1 cell spring, the grid 1x1 cell, the spring on one face of the 1x1 cell, the inner/outer strip of the grid and the welded part. The specimens were irradiated in the CT test hole of HANARO of a 30 MW thermal output at 300 deg. C during about 100 days From the spring test of mid grid 1x1 cell and grid plate, the irradiation effects can be examined. The irradiation effects on the irradiation growth also were occurred. The buckling load of mid grid 1x1 cell does not change with a neutron irradiation. From the tensile tests, the strengths increased but the elongations decreased due to an irradiation. The tensile test and microstructure examination of the spot and fillet welded parts are performed for the evaluation of an irradiation effects. Through these tests of components, the essential data on the fuel assembly design could be obtained. These results will be used to update the irradiation behavior databases, to improve the performance of fuel assembly, and to predict the service life of the fuel assembly in a reactor

  10. Improvement of Sodium Neutronic Nuclear Data for the Computation of Generation IV Reactors

    International Nuclear Information System (INIS)

    Archier, P.

    2011-01-01

    The safety criteria to be met for Generation IV sodium fast reactors (SFR) require reduced and mastered uncertainties on neutronic quantities of interest. Part of these uncertainties come from nuclear data and, in the particular case of SFR, from sodium nuclear data, which show significant differences between available international libraries (JEFF-3.1.1, ENDF/B-VII.0, JENDL-4.0). The objective of this work is to improve the knowledge on sodium nuclear data for a better calculation of SFR neutronic parameters and reliable associated uncertainties. After an overview of existing 23 Na data, the impact of the differences is quantified, particularly on sodium void reactivity effects, with both deterministic and stochastic neutronic codes. Results show that it is necessary to completely re-evaluate sodium nuclear data. Several developments have been made in the evaluation code Conrad, to integrate new nuclear reactions models and their associated parameters and to perform adjustments with integral measurements. Following these developments, the analysis of differential data and the experimental uncertainties propagation have been performed with Conrad. The resolved resonances range has been extended up to 2 MeV and the continuum range begins directly beyond this energy. A new 23 Na evaluation and the associated multigroup covariances matrices were generated for future uncertainties calculations. The last part of this work focuses on the sodium void integral data feedback, using methods of integral data assimilation to reduce the uncertainties on sodium cross sections. This work ends with uncertainty calculations for industrial-like SFR, which show an improved prediction of their neutronic parameters with the new evaluation. (author) [fr

  11. Investigation of a Novel NDE Method for Monitoring Thermomechanical Damage and Microstructure Evolution in Ferritic-Martensitic Steels for Generation IV Nuclear Energy Systems

    Energy Technology Data Exchange (ETDEWEB)

    Nagy, Peter

    2013-09-30

    The main goal of the proposed project is the development of validated nondestructive evaluation (NDE) techniques for in situ monitoring of ferritic-martensitic steels like Grade 91 9Cr-1Mo, which are candidate materials for Generation IV nuclear energy structural components operating at temperatures up to ~650{degree}C and for steam-generator tubing for sodium-cooled fast reactors. Full assessment of thermomechanical damage requires a clear separation between thermally activated microstructural evolution and creep damage caused by simultaneous mechanical stress. Creep damage can be classified as "negligible" creep without significant plastic strain and "ordinary" creep of the primary, secondary, and tertiary kind that is accompanied by significant plastic deformation and/or cavity nucleation and growth. Under negligible creep conditions of interest in this project, minimal or no plastic strain occurs, and the accumulation of creep damage does not significantly reduce the fatigue life of a structural component so that low-temperature design rules, such as the ASME Section III, Subsection NB, can be applied with confidence. The proposed research project will utilize a multifaceted approach in which the feasibility of electrical conductivity and thermo-electric monitoring methods is researched and coupled with detailed post-thermal/creep exposure characterization of microstructural changes and damage processes using state-of-the-art electron microscopy techniques, with the aim of establishing the most effective nondestructive materials evaluation technique for particular degradation modes in high-temperature alloys that are candidates for use in the Next Generation Nuclear Plant (NGNP) as well as providing the necessary mechanism-based underpinnings for relating the two. Only techniques suitable for practical application in situ will be considered. As the project evolves and results accumulate, we will also study the use of this technique for monitoring other GEN IV

  12. Cycle for innovative nuclear Gen 4. systems=; Cycle des systemes du futur

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    In the framework of the development of nuclear systems of the 4. generation, the preliminary and schematic reprocessing goals are a cleaning of fission products without a priori separation of the different actinides. The objective of the workshop is to exchange information about the potential efficiency of innovative fuel processing treatments in order to evaluate the impact of impurities on the design of the fuel during its re-fabrication and re-introduction inside the reactor, and on the materials and systems. This document gathers the slides of the 18 presentations given at this workshop: 1 - from the PWR fuel to the closed cycle fast spectrum concepts of generation 4 systems (P. Anzieu, F. Carre, Ph. Brossard, M. Delpech); 2 - the double strata scenarios: objectives and characteristics (S. David and F. Varaine); 3 - why a molten salts thorium file (D. Heuer); 4 - the common 'molten salts' research program of the CNRS (D. Heuer, S. Sanchez); 5 - the hydro-metallurgical reprocessing, the knowledge gained and the statuses of the 5. PCRD, synthesis of the OECD works (C. Madic); 6 - pyro-chemistry: Pyropep status (H. Boussier); 7 - technological bolts identified during the Most project of the 5. PCRD (C. Renault, Ch. Le Brun, M. Delpech and C. Garzenne); 8 - the molten salt reactor concept and its reprocessing options, expected efficiencies (L. Mathieu); 9 - methodology of evaluation of pyro-chemical fuel reprocessing schemes (H. Boussier); 10 - molten salt reactor, design-aided tools for the reactor and the reprocessing plant (O. Gastaldi, E. Walle, O. Koberl, D. Lecarpentier); 11 - status of CEA's prospective studies for the front-end of the fuel reprocessing process/dry ways (S. Bourg); 12 - results of activity coefficient measurements in liquid metals (J. Finne, E. Walle, G. Picard, S. Sanchez and O. Conocar); 13 - potentialities of electrolytic separation and liquid-liquid extraction processes (molten salts/molten metal) for the multi

  13. Methodology for proliferation resistance and physical protection of Generation IV nuclear energy systems

    International Nuclear Information System (INIS)

    Bari, R.; Peterson, P.; Nishimura, R.; Roglans-Ribas, J.

    2005-01-01

    Enhanced proliferation resistance and physical protection (PR and PP) is one of the technology goals for advanced nuclear concepts. Under the auspices of the Generation IV International Forum an international experts group has been chartered to develop an evaluation methodology for PR and PP. This methodology will permit an objective PR and PP comparison between alternative nuclear systems and support design optimization to enhance robustness against proliferation, theft and sabotage. The assessment framework consists of identifying the threats to be considered, defining the PR and PP measures required to evaluate the resistance of a nuclear system to proliferation, theft or sabotage, and establishing quantitative methods to evaluate the proposed measures. The defined PR and PP measures are based on the design of the system (e.g., materials, processes, facilities), and institutional measures (e.g., safeguards, access control). The assessment methodology uses analysis of pathways' with respect to specific threats to determine the PR and PP measures. Analysis requires definition of the threats (i.e. objective, capability, strategy), decomposition of the system into its relevant elements (e.g., reactor core, fuel recycle facility, fuel storage), and identification of targets. (author)

  14. Overview of the CEA R and D support to generation IV nuclear energy systems

    International Nuclear Information System (INIS)

    Carre, Frank; Anzieu, Pascal; Billot, Philippe; Brossard, Philippe; Fiorini, Gian-Luigi

    2004-01-01

    As a result of an early technology road-map performed at the end of 2000, the CEA selected a sequenced development of advanced gas cooled high temperature nuclear systems as main focus for its R and D programme on future nuclear energy systems. The selection of this research objectives originates both from the significance of fast neutrons and high temperature for nuclear energy to meet the needs anticipated beyond 2020/2030, and from the significant common R and D pathway that supports both medium term industrial projects and more advanced versions of gas cooled reactors. The first step of the 'Gas Technology Path' aims to support the development of a modular HTR likely to meet international market needs around 2020. The second step is a Very High Temperature Reactor (> 950 deg. C) to efficiently produce, among others, hydrogen though thermo-chemical water splitting or to generate electricity with an efficiency above 50%. The third step of the Path is a Gas Fast Reactor that features a fast-spectrum helium-cooled reactor and closed fuel cycle, with a direct-cycle helium turbine for electricity production and full recycle of actinides. The paper succinctly presents the R and D program launched in 2001 by the CEA with industrial partners on the 'Gas Technology Path', which is destined to become the contribution of France to the development of the VHTR and the GFR within the next phase of the Generation IV Forum

  15. Overview of the CEA R and D support to generation IV nuclear energy systems

    Energy Technology Data Exchange (ETDEWEB)

    Carre, Frank; Anzieu, Pascal; Billot, Philippe; Brossard, Philippe; Fiorini, Gian-Luigi

    2004-07-01

    As a result of an early technology road-map performed at the end of 2000, the CEA selected a sequenced development of advanced gas cooled high temperature nuclear systems as main focus for its R and D programme on future nuclear energy systems. The selection of this research objectives originates both from the significance of fast neutrons and high temperature for nuclear energy to meet the needs anticipated beyond 2020/2030, and from the significant common R and D pathway that supports both medium term industrial projects and more advanced versions of gas cooled reactors. The first step of the 'Gas Technology Path' aims to support the development of a modular HTR likely to meet international market needs around 2020. The second step is a Very High Temperature Reactor (> 950 deg. C) to efficiently produce, among others, hydrogen though thermo-chemical water splitting or to generate electricity with an efficiency above 50%. The third step of the Path is a Gas Fast Reactor that features a fast-spectrum helium-cooled reactor and closed fuel cycle, with a direct-cycle helium turbine for electricity production and full recycle of actinides. The paper succinctly presents the R and D program launched in 2001 by the CEA with industrial partners on the 'Gas Technology Path', which is destined to become the contribution of France to the development of the VHTR and the GFR within the next phase of the Generation IV Forum.

  16. Green technology into nuclear industry Eligibility of Ambidexter nuclear complex for a generation IV nuclear power system

    International Nuclear Information System (INIS)

    Park, Kwangheon; Koh, Moosung; Ryu, Jeongdong; Kim, Yangeun; Lee, Bumsik; Park, Hyuntack

    2000-01-01

    Green power is being developed up to a point that is feasible not only in an environmental sense, but also in an economical viewpoint. This paper introduces two case studies that applied green technology into nuclear industry. 1) Nuclear laundry: A laundry machine that uses liquid and supercritical Co 2 as a solvent for decontamination of contaminated working dresses in nuclear power plants was developed. The machine consists of a 16 liter reactor, a recovery system with compressors, and storage tanks. All CO 2 used in cleaning is fully recovered and reused in next cleaning, resulting in no production

  17. Overview of materials R and D for fusion and Gen-4

    Energy Technology Data Exchange (ETDEWEB)

    Kohyama, A. [Kyoto Univ., lnstitute of Advanced Energy (Japan); Tavassoli, F.; Carre, F.; Billot, P. [CEA Saclay, 91 - Gif sur Yvette (France); Zinide, S. [Oak Ridge National Laboratory, Materials Science and Technology Div., AK TN (United States)

    2007-07-01

    Full text of publication follows: In view of the growing need for energy, the risk of exhaustion of fossil fuel and the problem of global warming, the nuclear energy is receiving added attention as a realistic and viable advanced solution. International collaborations on Generation IV (Gen-IV) fission reactors and on ITER and DEMO fusion reactors are developing. This is particularly the case in the sector of materials, where they hold the key to success of these systems. The international community has recognized and planned its materials R and D work for Fusion and Gen-IV reactors with the following considerations: 1- The time allotted to materials R and D is short and may not allow development of totally new materials. 2- Activities required, to cover existing materials variations and service conditions necessary for reactor design, are very time consuming. 3- The work to be done must build upon the existing knowledge of materials and avoid duplications. Although ITER for fusion and Generation four International Forum (GIF) for Gen-IV are important international collaborative programs, they are insufficient to meet all the national energy policies of the participating countries. This paper provides an overview of the materials R and D carried out for fusion and Gen-IV reactors at international and national levels. Materials programs discussed include both cross-cutting and reactor specific actions, where major tasks can be defined as: + Cross-cutting materials tasks: - materials for high temperature service; - materials with neutron damage tolerance; - materials behavior analysis and modeling; - high temperature design methodology. + Reactor specific materials tasks: - very high temperature alloys; - carbon, high temperature ceramics and their composites; - materials compatibilities. Starting with a brief introduction of materials R and D strategies, ITER and Broader Approach (BA), overall activities for fusion and GIF for Gen-IV will be reviewed. Domestic

  18. Validation of Nuclear Criticality Safety Software and 27 energy group ENDF/B-IV cross sections

    International Nuclear Information System (INIS)

    Lee, B.L. Jr.

    1994-08-01

    The validation documented in this report is based on calculations that were executed during June through August 1992, and was completed in June 1993. The statistical analyses in Appendix C and Appendix D were completed in October 1993. This validation gives Portsmouth NCS personnel a basis for performing computerized KENO V.a calculations using the Martin Marietta Nuclear Criticality Safety Software. The first portion of the document outlines basic information in regard to validation of NCSS using ENDF/B-IV 27-group cross sections on the IBM 3090 at ORNL. A basic discussion of the NCSS system is provided, some discussion on the validation database and validation in general. Then follows a detailed description of the statistical analysis which was applied. The results of this validation indicate that the NCSS software may be used with confidence for criticality calculations at the Portsmouth Gaseous Diffusion Plant. When the validation results are treated as a single group, there is 95% confidence that 99.9% of future calculations of similar critical systems will have a calculated K eff > 0.9616. Based on this result the Portsmouth Nuclear Criticality Safety Department has adopted the calculational acceptance criteria that a k eff + 2σ ≤ 0.95 is safety subcritical. The validation of NCSS on the IBM 3090 at ORNL was extended to include NCSS on the IBM 3090 at K-25

  19. Theoretical analysis of nuclear reactors (Phase I), I-V, Part IV, Nuclear fuel depletion; Razrada metoda teorijske analize nuklearnih reaktora (I faza) I-V, IV Deo, Promena izotopnog sastava goriva

    Energy Technology Data Exchange (ETDEWEB)

    Pop-Jordanov, J [Institute of Nuclear Sciences Boris Kidric, Vinca, Beograd (Serbia and Montenegro)

    1962-07-15

    Nuclear fuel depletion is analyzed in order to estimate the qualitative and quantitative fuel property changes during irradiation and the influence of changes on the reactivity during long-term reactor operation. The changes of fuel properties are described by changes of neutron absorption and fission cross sections. Part one of this report covers the economic significance of fuel burnup and the review of fuel isotopic changes during depletion. Pat two contains the analysis of the U{sup 235} chain, analytical expressions for the concentrations of U{sup 235}, U{sup 236} and Np{sup 237} as a function of burnup. Part three contains the analysis of neutron spectrum influence on the Westcott method for calculating the cross sections. Part four contains the calculation method applied on Calder Hall type reactor. The results were obtained by applying ZUSE-22 R digital computer.

  20. Nuclear data uncertainty analysis for the generation IV gas-cooled fast reactor

    International Nuclear Information System (INIS)

    Pelloni, S.; Mikityuk, K.

    2012-01-01

    For the European 2400 MW Gas-cooled Fast Reactor (GoFastR), this paper summarizes a priori uncertainties, i.e. without any integral experiment assessment, of the main neutronic parameters which were obtained on the basis of the deterministic code system ERANOS (Edition 2.2-N). JEFF-3.1 cross-sections were used in conjunction with the newest ENDF/B-VII.0 based covariance library (COMMARA-2.0) resulting from a recent cooperation of the Brookhaven and Los Alamos National Laboratories within the Advanced Fuel Cycle Initiative. The basis for the analysis is the original GoFastR concept with carbide fuel pins and silicon-carbide ceramic cladding, which was developed and proposed in the first quarter of 2009 by the 'French alternative energies and Atomic Energy Commission', CEA. The main conclusions from the current study are that nuclear data uncertainties of neutronic parameters may still be too large for this Generation IV reactor, especially concerning the multiplication factor, despite the fact that the new covariance library is quite complete; These uncertainties, in relative terms, do not show the a priori expected increase with bum-up as a result of the minor actinide and fission product build-up. Indeed, they are found almost independent of the fuel depletion, since the uncertainty associated with 238 U inelastic scattering results largely dominating. This finding clearly supports the activities of Subgroup 33 of the Working Party on International Nuclear Data Evaluation Cooperation (WPEC), i.e. Methods and issues for the combined use of integral experiments and covariance data, attempting to reduce the present unbiased uncertainties on nuclear data through adjustments based on available experimental data. (authors)

  1. Regulatory Safety Issues in the Structural Design Criteria of ASME Section III Subsection NH and for Very High Temperatures for VHTR and GEN IV

    International Nuclear Information System (INIS)

    O'Donnell, William J.; Griffin, Donald S.

    2007-01-01

    The objective of this task is to identify issues relevant to ASME Section III, Subsection NH [1], and related Code Cases that must be resolved for licensing purposes for VHTGRs (Very High Temperature Gas Reactor concepts such as those of PBMR, Areva, and GA); and to identify the material models, design criteria, and analysis methods that need to be added to the ASME Code to cover the unresolved safety issues. Subsection NH was originally developed to provide structural design criteria and limits for elevated-temperature design of Liquid Metal Fast Breeder Reactor (LMFBR) systems and some gas-cooled systems. The U.S. Nuclear Regulatory Commission (NRC) and its Advisory Committee for Reactor Safeguards (ACRS) reviewed the design limits and procedures in the process of reviewing the Clinch River Breeder Reactor (CRBR) for a construction permit in the late 1970s and early 1980s, and identified issues that needed resolution. In the years since then, the NRC and various contractors have evaluated the applicability of the ASME Code and Code Cases to high-temperature reactor designs such as the VHTGRs, and identified issues that need to be resolved to provide a regulatory basis for licensing. This Report describes: (1) NRC and ACRS safety concerns raised during the licensing process of CRBR , (2) how some of these issues are addressed by the current Subsection NH of the ASME Code; and (3) the material models, design criteria, and analysis methods that need to be added to the ASME Code and Code Cases to cover unresolved regulatory issues for very high temperature service.

  2. Regulatory Safety Issues in the Structural Design Criteria of ASME Section III Subsection NH and for Very High Temperatures for VHTR & GEN IV

    Energy Technology Data Exchange (ETDEWEB)

    William J. O’Donnell; Donald S. Griffin

    2007-05-07

    The objective of this task is to identify issues relevant to ASME Section III, Subsection NH [1], and related Code Cases that must be resolved for licensing purposes for VHTGRs (Very High Temperature Gas Reactor concepts such as those of PBMR, Areva, and GA); and to identify the material models, design criteria, and analysis methods that need to be added to the ASME Code to cover the unresolved safety issues. Subsection NH was originally developed to provide structural design criteria and limits for elevated-temperature design of Liquid Metal Fast Breeder Reactor (LMFBR) systems and some gas-cooled systems. The U.S. Nuclear Regulatory Commission (NRC) and its Advisory Committee for Reactor Safeguards (ACRS) reviewed the design limits and procedures in the process of reviewing the Clinch River Breeder Reactor (CRBR) for a construction permit in the late 1970s and early 1980s, and identified issues that needed resolution. In the years since then, the NRC and various contractors have evaluated the applicability of the ASME Code and Code Cases to high-temperature reactor designs such as the VHTGRs, and identified issues that need to be resolved to provide a regulatory basis for licensing. This Report describes: (1) NRC and ACRS safety concerns raised during the licensing process of CRBR , (2) how some of these issues are addressed by the current Subsection NH of the ASME Code; and (3) the material models, design criteria, and analysis methods that need to be added to the ASME Code and Code Cases to cover unresolved regulatory issues for very high temperature service.

  3. Probing Nuclear Spin Effects on Electronic Spin Coherence via EPR Measurements of Vanadium(IV) Complexes.

    Science.gov (United States)

    Graham, Michael J; Krzyaniak, Matthew D; Wasielewski, Michael R; Freedman, Danna E

    2017-07-17

    Quantum information processing (QIP) has the potential to transform numerous fields from cryptography, to finance, to the simulation of quantum systems. A promising implementation of QIP employs unpaired electronic spins as qubits, the fundamental units of information. Though molecular electronic spins offer many advantages, including chemical tunability and facile addressability, the development of design principles for the synthesis of complexes that exhibit long qubit superposition lifetimes (also known as coherence times, or T 2 ) remains a challenge. As nuclear spins in the local qubit environment are a primary cause of shortened superposition lifetimes, we recently conducted a study which employed a modular spin-free ligand scaffold to place a spin-laden propyl moiety at a series of fixed distances from an S = 1 / 2 vanadium(IV) ion in a series of vanadyl complexes. We found that, within a radius of 4.0(4)-6.6(6) Å from the metal center, nuclei did not contribute to decoherence. To assess the generality of this important design principle and test its efficacy in a different coordination geometry, we synthesized and investigated three vanadium tris(dithiolene) complexes with the same ligand set employed in our previous study: K 2 [V(C 5 H 6 S 4 ) 3 ] (1), K 2 [V(C 7 H 6 S 6 ) 3 ] (2), and K 2 [V(C 9 H 6 S 8 ) 3 ] (3). We specifically interrogated solutions of these complexes in DMF-d 7 /toluene-d 8 with pulsed electron paramagnetic resonance spectroscopy and electron nuclear double resonance spectroscopy and found that the distance dependence present in the previously synthesized vanadyl complexes holds true in this series. We further examined the coherence properties of the series in a different solvent, MeCN-d 3 /toluene-d 8 , and found that an additional property, the charge density of the complex, also affects decoherence across the series. These results highlight a previously unknown design principle for augmenting T 2 and open new pathways for the

  4. Fatores genéticos na agregação familiar da pressão arterial de famílias nucleares portuguesas Factores genéticos en la agregación familiar de la presión arterial de familias nucleares portuguesas Genetic factors in familial aggregation of blood pressure of portuguese nuclear families

    Directory of Open Access Journals (Sweden)

    Rogério César Fermino

    2009-03-01

    Full Text Available FUNDAMENTO: Apesar da elevada prevalência de hipertensão arterial em Portugal, a importância relativa que os genes possam exercer na manifestação final dos valores da pressão arterial (PA parece pouco estudada. OBJETIVOS: Verificar a presença, indireta, de transmissão vertical de fatores genéticos entre progenitores e descendentes nos valores da PA, e estimar a contribuição dos fatores genéticos responsáveis pela variação dos valores de PA em termos populacionais. MÉTODOS: A amostra foi constituída por 367 indivíduos (164 progenitores e 203 descendentes pertencentes a 107 famílias nucleares provenientes de diferentes regiões do norte de Portugal, participantes do projeto "Famílias Activas". A PA foi medida com um aparelho digital da marca Omron®, modelo M6 (HEM-7001-E. Foram utilizados os softwares estatísticos SPSS 15.0 para a análise exploratória de dados e o cálculo das estatísticas descritivas, e o PEDSTATS para analisar o comportamento genérico das variáveis entre os diferentes membros da família. O cálculo das correlações entre familiares e as estimativas de heritabilidade foram realizados nos módulos FCOR e ASSOC do software de epidemiologia genética S.A.G.E., versão 5.3. RESULTADOS: Para a PA sistólica (PAS, os valores das correlações entre os graus de parentesco foram de baixos a moderados (0,21FUNDAMENTO: A pesar de la elevada prevalencia de hipertensión arterial en Portugal, la importancia relativa que los genes pueden ejercer en la manifestación final de los valores de la presión arterial (PA nos parece poco estudiada. OBJETIVOS:Verificar la presencia, indirecta, de transmisión vertical de factores genéticos entre progenitores y descendientes en los valores de la PA, y estimar el aporte de los factores genéticos responsables de la variación de los valores de PA en términos poblacionales. MÉTODOS: La muestra estaba conformada por 367 individuos (164 progenitores y 203 descendientes

  5. Future nuclear energy scenarios for Europe

    International Nuclear Information System (INIS)

    Roelofs, F.; Van Heek, A.

    2010-01-01

    Nuclear energy is back on the agenda worldwide. In order to prepare for the next decades and to set priorities in nuclear R and D and investment, market share scenarios are evaluated. This allows to identify the triggers which influence the market penetration of future nuclear reactor technologies. To this purpose, scenarios for a future nuclear reactor park in Europe have been analysed applying an integrated dynamic process modelling technique. Various market share scenarios for nuclear energy are derived including sub-variants with regard to the intra-nuclear options taken, e.g. introduction date of Gen-III (i.e. EPR) and Gen-IV (i.e. SCWR, HTR, FR) reactors, level of reprocessing, and so forth. The assessment was undertaken using the DANESS code which allows to provide a complete picture of mass-flow and economics of the various nuclear energy system scenarios. The analyses show that the future European nuclear park will exist of combinations of Gen-III and Gen-IV reactors. This mix will always consist of a set of reactor types each having its specific strengths. Furthermore, the analyses highlight the triggers influencing the choice between different nuclear energy deployment scenarios. In addition, a dynamic assessment is made with regard to manpower requirements for the construction of a future nuclear fleet in the different scenarios. (authors)

  6. R and D programme on generation IV nuclear energy systems: the high temperatures gas-cooled reactors

    International Nuclear Information System (INIS)

    Carre, F.; Fiorini, G.L.; Billot, P.; Anzieu, P.; Brossard, P.

    2005-01-01

    The Generation IV Technology Roadmap selected, among others, a sequenced development of advanced high temperature gas cooled reactors as one of the main focus for R and D on future nuclear energy systems. The selection of this research objective originates both from the significance of high temperature and fast neutrons for nuclear energy to meet the needs for a sustainable development for the medium-long term (2020/2030 and beyond), and from the significant common R and D pathway that supports both medium term industrial projects and more advanced versions of gas cooled reactors. The first step of the 'Gas Technology Path' aims to support the development of a modular HTR to meet specific international market needs around 2020. The second step is a Very High Temperature Reactor - VHTR (>950 C) - to efficiently produce hydrogen through thermo-chemical or electro-chemical water splitting or to generate electricity with an efficiency above 50%, among other applications of high temperature nuclear heat. The third step of the Path is a Gas Fast Reactor - GFR - that features a fast-spectrum helium-cooled reactor and closed fuel cycle, with a direct or indirect thermodynamic cycle for electricity production and full recycle of actinides. Hydrogen production is also considered for the GFR. The paper succinctly presents the R and D program currently under definition and partially launched within the Generation IV International Forum on this consistent set of advanced gas cooled nuclear systems. (orig.)

  7. POWER-GEN '90 conference papers: Volume 7 (Fossil plant performance availability and improvement) and Volume 8 (Nuclear power issues)

    International Nuclear Information System (INIS)

    Anon.

    1990-01-01

    This is book 4 of papers presented at the Third International Exhibition and Conference for the Power Generation Industries, December 4-6, 1990. This book contains Volume 7, Fossil Plant Performance Availability and Improvement, and Volume 8, Nuclear Power Issues. The topics of the papers include computer applications in plant operations and maintenance, managing aging plants, plant improvements, plant operations and maintenance, the future of nuclear power, achieving cost effective plant operation, managing nuclear plant aging and license renewal, and the factors affecting a decision to build a new nuclear plant

  8. NJOY nuclear data processing system. Volume IV. The ERRORR and COVR modules

    International Nuclear Information System (INIS)

    Muir, D.W.; MacFarlane, R.E.

    1985-12-01

    The NJOY nuclear data processing system is a comprehensive computer code package for producing cross sections and related nuclear parameters from ENDF/B evaluated nuclear data. This volume provides detailed descriptions of the NJOY modules ERRORR and COVR, which are concerned with the covariances (uncertainties and correlations) of multigroup cross sections and fission neutron yield (anti nu) values. 17 refs

  9. Study of aqueous complexes of uranium (IV) in an acid medium by nuclear magnetic resonance

    International Nuclear Information System (INIS)

    Kiener, C.; Folcher, G.; Rigny, P.; Virlet, J.

    1976-01-01

    The hydration of tetravalent uranium in acid solutions has been studied by proton magnetic resonance. Longitudinal and transversal relaxation rates of water are reported as a function of temperature, acidity, and added ions. The relaxation rates observed in perchloric solutions at high temperature are governed by the exchange process of water molecules between the inner coordination sphere of uranium(IV) and the bulk water. The bound proton's lifetime lies between 10 ms and 1 s. At pH > 0, the exchange rate depends upon acidity according to a simple expression. At high concentrations of diamagnetic ions the exchange rate depends linearly upon water activity. At low temperature, the proton relaxation rates are dominated by an outer sphere effect and the electronic relaxation time of uranium(IV) is found to be about 10 -13 s. No signal is observed from protons of the water molecules in the first sphere, firmly bound to uranium(IV), which undergo rapid relaxation. The chemical shift of the proton absorption signal in hydrochloric solutions arise from tightly bound water molecules in paramagnetic interaction with uranium(IV) in a second sphere, and in fast exchange with the bulk water. Above a chlorine concentration of 6 M, the monochloro complex of uranium(IV) contributes to the chemical shift. (author)

  10. Design of Radiation-Tolerant Structural Alloys for Generation IV Nuclear Energy Systems

    Energy Technology Data Exchange (ETDEWEB)

    Allen, T.R.; Was, G.S.; Bruemmer, S.M.; Gan, J.; Ukai, S.

    2005-12-28

    The objective of this program is to improve the radiation tolerance of both austenitic and ferritic-martensitic (F-M) alloys projected for use in Generation IV systems. The expected materials limitations of Generation IV components include: creep strength, dimensional stability, and corrosion/stress corrosion compatibility. The material design strategies to be tested fall into three main categories: (1) engineering grain boundaries; (2) alloying, by adding oversized elements to the matrix; and (3) microstructural/nanostructural design, such as adding matrix precipitates. These three design strategies were tested across both austenitic and ferritic-martensitic alloy classes

  11. Thermochemical investigation of molten fluoride salts for Generation IV nuclear applications - an equilibrium exercise

    NARCIS (Netherlands)

    van der Meer, J.P.M.

    2006-01-01

    The concept of the Molten Salt Reactor, one of the so-called Generation IV future reactors, is that the fuel, a fissile material, which is dissolved in a molten fluoride salt, circulates through a closed circuit. The heat of fission is transferred to a second molten salt coolant loop, the heat of

  12. Nuclear grade and DNA ploidy in stage IV breast cancer with only visceral metastases at initial diagnosis.

    Science.gov (United States)

    De Lena, M; Barletta, A; Marzullo, F; Rabinovich, M; Leone, B; Vallejo, C; Machiavelli, M; Romero, A; Perez, J; Lacava, J; Cuevas, M A; Rodriguez, R; Schittulli, F; Paradisco, A

    1996-01-01

    The presence of early metastases to distant sites in breast cancer patients is an infrequent event whose mechanisms are still not clear. The aim of this study was to evaluate the biologic and clinical role of DNA ploidy and cell nuclear grade of primary tumors in the metastatic process of a series of stage IV previously untreated breast cancer patients with only visceral metastases. DNA flow cytometry analysis on paraffin-embedded material and cell nuclear grading of primary tumors was performed on a series of 50 breast cancer patients with only visceral metastases at the time of initial diagnosis. Aneuploidy was found in 28/46 (61%) of evaluable cases and was independent of site of involvement, clinical response, time of progression and overall survival of patients. Of the 46 cases evaluable for nuclear grade, 5 (11%), 16 (35%) and 25 (54%) were classified as G1 (well-differentiated) G2 and G3, respectively. Nuclear grade also was unrelated to response to therapy and overall survival, whereas time to progression was significantly longer in G1-2 than G3 tumors with the logrank test (P < 0.03) and multivariate analysis. Our results seem to stress the difficulty to individualize different prognostic subsets from a series of breast cancer patients with only visceral metastases at initial diagnosis according to DNA flow cytometry and nuclear grade.

  13. Development of methods for measuring materials nuclear characteristics, Phases, I, II, II and IV

    International Nuclear Information System (INIS)

    Maglic, R.

    1963-04-01

    This report contains the following phases of the project 'measurement of nuclear characteristics of reactor materials': nuclear performances of the neutron chopper; method for measuring total effective cross sections by transmission method on the chopper; review of methods for measuring activation cross sections; measurement of neutron spectra of the RA reactor and measurement of total effective cross section of gold by using the chopper

  14. International Intercomparison Exercise for Nuclear Accident Dosimetry at the DAF Using GODIVA-IV

    Energy Technology Data Exchange (ETDEWEB)

    Hickman, David [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Hudson, Becka [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-12-15

    The Nuclear Criticality Safety Program operated under the direction of Dr. Jerry McKamy completed the first NNSA Nuclear Accident Dosimetry exercise on May 27, 2016. Participants in the exercise were from Lawrence Livermore National Laboratory (LLNL), Los Alamos National Laboratory (LANL), Sandia National Laboratory (SNL), Savanah River Site (SRS), Pacific Northwest National Laboratory (PNNL), US Navy, the Atomic Weapons Establishment (United Kingdom) under the auspices of JOWOG 30, and the Institute for Radiological Protection and Nuclear Safety (France) by special invitation and NCSP memorandum of understanding. This exercise was the culmination of a series of Integral Experiment Requests (IER) that included the establishment of the Nuclear Criticality Experimental Research Center, (NCERC) the startup of the Godiva Reactor (IER-194), the establishment of a the Nuclear Accident Dosimetry Laboratory (NAD LAB) in Mercury, NV, and the determination of reference dosimetry values for the mixed neutron and photon radiation field of Godiva within NCERC.

  15. Tau-Induced Ca2+/Calmodulin-Dependent Protein Kinase-IV Activation Aggravates Nuclear Tau Hyperphosphorylation.

    Science.gov (United States)

    Wei, Yu-Ping; Ye, Jin-Wang; Wang, Xiong; Zhu, Li-Ping; Hu, Qing-Hua; Wang, Qun; Ke, Dan; Tian, Qing; Wang, Jian-Zhi

    2018-04-01

    Hyperphosphorylated tau is the major protein component of neurofibrillary tangles in the brains of patients with Alzheimer's disease (AD). However, the mechanism underlying tau hyperphosphorylation is not fully understood. Here, we demonstrated that exogenously expressed wild-type human tau40 was detectable in the phosphorylated form at multiple AD-associated sites in cytoplasmic and nuclear fractions from HEK293 cells. Among these sites, tau phosphorylated at Thr205 and Ser214 was almost exclusively found in the nuclear fraction at the conditions used in the present study. With the intracellular tau accumulation, the Ca 2+ concentration was significantly increased in both cytoplasmic and nuclear fractions. Further studies using site-specific mutagenesis and pharmacological treatment demonstrated that phosphorylation of tau at Thr205 increased nuclear Ca 2+ concentration with a simultaneous increase in the phosphorylation of Ca 2+ /calmodulin-dependent protein kinase IV (CaMKIV) at Ser196. On the other hand, phosphorylation of tau at Ser214 did not significantly change the nuclear Ca 2+ /CaMKIV signaling. Finally, expressing calmodulin-binding protein-4 that disrupts formation of the Ca 2+ /calmodulin complex abolished the okadaic acid-induced tau hyperphosphorylation in the nuclear fraction. We conclude that the intracellular accumulation of phosphorylated tau, as detected in the brains of AD patients, can trigger nuclear Ca 2+ /CaMKIV signaling, which in turn aggravates tau hyperphosphorylation. Our findings provide new insights for tauopathies: hyperphosphorylation of intracellular tau and an increased Ca 2+ concentration may induce a self-perpetuating harmful loop to promote neurodegeneration.

  16. Paul Scherrer Institute Scientific Report 1999. Volume IV: Nuclear Energy and Safety

    International Nuclear Information System (INIS)

    Smith, Brian; Gschwend, Beatrice

    2000-01-01

    Nuclear energy related research in Switzerland is concentrated at PSI's Nuclear Energy and Safety Research Department (NES). The total effort invested in nuclear energy research in 1999 amounted to about 185 py/a and 4.7 MCHF of investment and maintenance costs. Approximately half of the salary, investment and maintenance costs are externally funded, primarily by the Swiss Utilities, the national co-operative for the disposal of nuclear waste (NAGRA), the Federal Office of Energy (BFE) through the nuclear safety inspectorate (HSK) and the Federal Office for Science and Education (BBW) in connection with the EU Framework Programmes; an increasing part of external funding is coming from domestic and foreign industry (nuclear component and fuel suppliers). The activities of the department are concentrated on three main domains of: Safety and related problems of operating plants; safety features of future reactor and fuel cycles; waste management. 4 % of the total resources are invested in addressing more global aspects of energy. Many of the programs are part of collaborations with universities, industry, or international organisations. Progress in 1999 in these topical areas is described in this report. A list of scientific publications in 1999 is also provided

  17. Paul Scherrer Institute Scientific Report 1998. Volume IV: Nuclear Energy and Safety

    International Nuclear Information System (INIS)

    Birchley, Jon; Ringele, Ruth

    1999-01-01

    Nuclear energy related research in Switzerland is concentrated at PSI's Nuclear Energy and Safety Research Department (NES). The total effort invested in nuclear energy research in 1998 amounted to about 195 py/a and 4.5 millions CHF of investment and maintenance costs. Approximately half of the salary, investment and maintenance costs are externally funded, primarily by the Swiss Utilities, the national co-operative for the disposal of nuclear waste (NAGRA), the Federal Office of Energy (BFE) through the nuclear safety inspectorate (HSK) and the Federal Office for Science and Education (BBW) in connection with the EC Framework Programmes; an increasing part of external funding is coming from domestic and foreign industry (nuclear component and fuel suppliers). The activities of the department are concentrated on three main domains of: Safety and related problems of operating plants; safety features of future reactor and fuel cycles; waste management. 4 % of the total resources are invested in addressing more global aspects of energy. Many of the programs are part of collaborations with universities, industry, or international organisations. A list of scientific publications in 1998 is included. (author)

  18. Paul Scherrer Institute Scientific Report 1998. Volume IV: Nuclear Energy and Safety

    Energy Technology Data Exchange (ETDEWEB)

    Birchley, Jon; Ringele, Ruth [eds.

    1999-09-01

    Nuclear energy related research in Switzerland is concentrated at PSI`s Nuclear Energy and Safety Research Department (NES). The total effort invested in nuclear energy research in 1998 amounted to about 195 py/a and 4.5 millions CHF of investment and maintenance costs. Approximately half of the salary, investment and maintenance costs are externally funded, primarily by the Swiss Utilities, the national co-operative for the disposal of nuclear waste (NAGRA), the Federal Office of Energy (BFE) through the nuclear safety inspectorate (HSK) and the Federal Office for Science and Education (BBW) in connection with the EC Framework Programmes; an increasing part of external funding is coming from domestic and foreign industry (nuclear component and fuel suppliers). The activities of the department are concentrated on three main domains of: Safety and related problems of operating plants; safety features of future reactor and fuel cycles; waste management. 4 % of the total resources are invested in addressing more global aspects of energy. Many of the programs are part of collaborations with universities, industry, or international organisations. A list of scientific publications in 1998 is included. (author) figs., tabs., refs.

  19. Paul Scherrer Institute Scientific Report 1999. Volume IV: Nuclear Energy and Safety

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Brian; Gschwend, Beatrice [eds.

    2000-07-01

    Nuclear energy related research in Switzerland is concentrated at PSI's Nuclear Energy and Safety Research Department (NES). The total effort invested in nuclear energy research in 1999 amounted to about 185 py/a and 4.7 MCHF of investment and maintenance costs. Approximately half of the salary, investment and maintenance costs are externally funded, primarily by the Swiss Utilities, the national co-operative for the disposal of nuclear waste (NAGRA), the Federal Office of Energy (BFE) through the nuclear safety inspectorate (HSK) and the Federal Office for Science and Education (BBW) in connection with the EU Framework Programmes; an increasing part of external funding is coming from domestic and foreign industry (nuclear component and fuel suppliers). The activities of the department are concentrated on three main domains of: Safety and related problems of operating plants; safety features of future reactor and fuel cycles; waste management. 4 % of the total resources are invested in addressing more global aspects of energy. Many of the programs are part of collaborations with universities, industry, or international organisations. Progress in 1999 in these topical areas is described in this report. A list of scientific publications in 1999 is also provided.

  20. GenBank

    Data.gov (United States)

    U.S. Department of Health & Human Services — GenBank is the NIH genetic sequence database, an annotated collection of all publicly available DNA sequences. GenBank is designed to provide and encourage access...

  1. Energy Research Advisory Board, Civilian Nuclear Power Panel: Subpanel 3 report, Institutional challenges: Volume IV

    International Nuclear Information System (INIS)

    1986-10-01

    The Institutional Challenges Subpanel of the Energy Research Advisory Board's Civilian Nuclear Power Panel was charged with the task of addressing the institutional issues that affect the future of nuclear power in the United States. Barriers created by non-technical issues are generally considered to be primary obstacles to revitalizing the nuclear fission option as part of a robust supply for future electrical generation. The Subpanel examined the following categories of institutional issues: (1) Administration Policy and Leadership, (2) Licensing Reform, (3) Standardized Designs, (4) Shared Financial Risk, (5) State and Economic Regulation, (6) Waste Disposal, and (7) Public Perception. The Subpanel concluded that the Administration and Congress have the opportunity and responsibility to provide leadership in resolving these difficulties. The main report provides information on the background and current situation for each institutional issue and concludes with the set of recommendations for action

  2. Paul Scherrer Institut annual report 1995. Annex IV: PSI nuclear energy and safety

    Energy Technology Data Exchange (ETDEWEB)

    Birchley, J.; Roesel, R.; Doesburg, R. van [eds.] [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

    1996-09-01

    Nuclear energy research in Switzerland is concentrated at PSI`s Department F4. It is explicitly mentioned in the Institute`s official charter and commands about one fifth of the Institute`s federal resources. Presently, PSI invests approx. 200 py/a in nuclear energy research, one third of this being externally funded; the share of external funding in investment costs totals approx. 50%. This funding is provided by the Swiss utilities and the NAGRA, the Safety Authority (HSK) and the former National Fund for Energy Research (NEFF). PSI`s activities in nuclear research concentrate on three main areas: safety of operating plants, safety features of future reactor concepts and waste management. 7% of personnel are invested in addressing global aspects of energy. (author) figs., tabs., refs.

  3. Paul Scherrer Institut annual report 1995. Annex IV: PSI nuclear energy and safety

    International Nuclear Information System (INIS)

    Birchley, J.; Roesel, R.; Doesburg, R. van

    1996-01-01

    Nuclear energy research in Switzerland is concentrated at PSI's Department F4. It is explicitly mentioned in the Institute's official charter and commands about one fifth of the Institute's federal resources. Presently, PSI invests approx. 200 py/a in nuclear energy research, one third of this being externally funded; the share of external funding in investment costs totals approx. 50%. This funding is provided by the Swiss utilities and the NAGRA, the Safety Authority (HSK) and the former National Fund for Energy Research (NEFF). PSI's activities in nuclear research concentrate on three main areas: safety of operating plants, safety features of future reactor concepts and waste management. 7% of personnel are invested in addressing global aspects of energy. (author) figs., tabs., refs

  4. Paul Scherrer Institute Scientific Report 2000. Volume IV: Nuclear Energy and Safety

    International Nuclear Information System (INIS)

    Smith, Brian; Gschwend, Beatrice

    2001-03-01

    Nuclear energy related research in Switzerland is concentrated at PSI's Nuclear Energy and Safety Research Department (NES). The activities of the department are concentrated on three main domains of: Safety and related problems of operating plants; safety features of future reactor and fuel cycles; waste management. Comprehensive assessments of energy systems are carried out in cooperation with PSI's General Energy Research Department. Many of the programs are part of collaborations with universities, industry, or international organisations. Progress in 2000 in these topical areas is described in this report. A list of scientific publications in 2000 is also provided

  5. Generation IV Nuclear Energy Systems Construction Cost Reductions Through the Use of Virtual Environments

    Energy Technology Data Exchange (ETDEWEB)

    Timothy Shaw; Vaugh Whisker

    2004-02-28

    The objective of this multi-phase project is to demonstrate the feasibility and effectiveness of using full-scale virtual reality simulation in the design, construction, and maintenance of future nuclear power plants. The project will test the suitability of immersive virtual reality technology to aid engineers in the design of the next generation nuclear power plant and to evaluate potential cost reductions that can be realized by optimization of installation and construction sequences. The intent is to see if this type of information technology can be used in capacities similar to those currently filled by full-scale physical mockups. This report presents the results of the completed project.

  6. Generation IV Nuclear Energy Systems Construction Cost Reductions Through the Use of Virtual Environments

    International Nuclear Information System (INIS)

    Timothy Shaw; Vaugh Whisker

    2004-01-01

    The objective of this multi-phase project is to demonstrate the feasibility and effectiveness of using full-scale virtual reality simulation in the design, construction, and maintenance of future nuclear power plants. The project will test the suitability of immersive virtual reality technology to aid engineers in the design of the next generation nuclear power plant and to evaluate potential cost reductions that can be realized by optimization of installation and construction sequences. The intent is to see if this type of information technology can be used in capacities similar to those currently filled by full-scale physical mockups. This report presents the results of the completed project

  7. Paul Scherrer Institute Scientific Report 2000. Volume IV: Nuclear Energy and Safety

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Brian; Gschwend, Beatrice [eds.

    2001-03-01

    Nuclear energy related research in Switzerland is concentrated at PSI's Nuclear Energy and Safety Research Department (NES). The activities of the department are concentrated on three main domains of: Safety and related problems of operating plants; safety features of future reactor and fuel cycles; waste management. Comprehensive assessments of energy systems are carried out in cooperation with PSI's General Energy Research Department. Many of the programs are part of collaborations with universities, industry, or international organisations. Progress in 2000 in these topical areas is described in this report. A list of scientific publications in 2000 is also provided.

  8. Book of Abstracts of IV. All-Polish Conference on Radiochemistry and Nuclear Chemistry

    International Nuclear Information System (INIS)

    2005-01-01

    The different aspects of radiochemistry have been presented and discussed. Especially application of radiochemical methods for preparation of biologically active compounds usable in nuclear medicine and biology as well as for isotope separation and purification have been presented in details. The application of radiochemical methods convenient for environmental monitoring and contamination control have been extensively represented as well

  9. Experimental observations to the electrical field for electrorefining of spent nuclear fuel in the Mark-IV electrorefiner

    International Nuclear Information System (INIS)

    Li, S. X.

    1998-01-01

    Experimental results from the pilot scale electrorefiner (Mark-IV ER) treating spent nuclear fuel are reported in this article. The electrorefining processes were carried out in a LiCl-KCl-UCl 3 electrolyte. It has been noted that spool of molten cadmium below the electrolyte plays an important role in the electrorefining operations. In addition, formations of electrical shorting path between anode baskets and the electrorefiner vessel were observed, which lessened the uranium dissolution process from anode baskets, however appeared to improve the morphology of cathode deposit. The FIDAP simulation code was used to calculate the electrical potential field distributions and the potential gradient near the cathode. The effect of the electrical shorting between anode baskets and electrorefiner vessel on the morphology of cathode products is discussed

  10. Paul Scherrer Institut annual report 1996. Annex IV: PSI nuclear energy and safety research

    International Nuclear Information System (INIS)

    Birchley, J.; Roesel, R.; Wellner, A.

    1997-01-01

    The department 'Nuclear Energy and Safety Research' (F4) at PSI carries the responsibility of performing the essential nuclear energy research in Switzerland. This research is part of the remit of PSI and follows government directive; about one-fifth of the Institute's Federal budget is allocated to this task. Currently about 190 persons are working in this field. Approximately 45% of the salary and investment costs (5.5 million CHF in the budget period 1996/97) are externally funded. This funding is provided primarily by the Swiss Utilities, the NAGRA and the safety authority HSK. The activities in nuclear research concentrate on three main domains: safety and safety related problems of operating plants, safety features of future reactor and fuel cycle concepts and waste management; another 4% of staff are addressing broader aspects of energy. At the end of 1996, a policy evaluation with the laboratory heads took place in order to redefine the direction of F4 activities. (author) figs., tabs., refs

  11. Instruction by virtual reality to operation and security of a nuclear power plant of IV generation

    International Nuclear Information System (INIS)

    Neri O, J. C.; Baltasar M, J.; Valle H, J.

    2009-10-01

    The purpose of LaNuVi project which is developing in the Engineering Faculty of National Autonomous University of Mexico, to have a virtual laboratory of nuclear reactors as tool of multidisciplinary education at basic and advanced levels in nuclear engineering area, involves training resources in audio visual and interactive form that allow to form a comprehension more realistic of operation of different systems and components. In this work is proposed to use educational resources, as the employees in the U.S. Army and in some centers of advanced education of medicine, where have been come proving concepts like projected reality, increased reality, tele transparency and others that present big benefits to learning-education process. The proposal here is to include the resource knew as serious game based learning. The focal point of stage that is presented is of a nuclear reactor PBMR like desalination and generator of controlled alternating energy and efficient that should put on in operation to allow the subsistence of a community in a desolated region of beginning second quarter of X XI century. For this purpose the designs are initiated and programmed several subsystems that allow the three-dimensional modeling of main components of a PBMR as well as of surrounding facilities. The obtained results and reaches of this design are presented. The product is in tests for a first version and it is hope to achieve a free and integral resource of national distribution for different cultural groups, interested in this type of advanced technology. (Author)

  12. Nuclear fuel cycle and sustainable development: strategies for the future

    International Nuclear Information System (INIS)

    Bouchard, J.

    2004-01-01

    In this presentation, the author aims to define the major role of the nuclear energy in the future, according a sustainable development scenario. The today aging park and the new Generation IV technologies are presented. The transition scenario from Pu mono-recycling in PWRs to actinide global recycling in fast neutron Gen IV systems is also developed. Closed cycles and fast reactors appear as the appropriate answer to sustainable objectives in a vision of a large expansion. (A.L.B.)

  13. Generation IV concepts - Presentation at ACRS workshop 'Regulatory challenges for future nuclear power plants'

    International Nuclear Information System (INIS)

    Versluis, Rob M.

    2001-01-01

    The concept of the Near-Term Deployment Working Group was to define a technical approach for Generation IV system with enough detail to allow evaluation against the goal, bur broad enough to allow for optional features and trade. The following concepts were taken into account: water coolant (water or heavy water), gas coolant, liquid metal coolants. Concepts were grouped according to concept sets of technology base share and design approach. Water coolant concepts were grouped as follows: PWR loop reactors, integral primary system PWRs, Integral BWRs, pressure tube reactors, high conversion cores, supercritical water reactors, advanced fuel cycle concepts. Gas coolant concepts were grouped as follows: pebble bed modular reactors; prismatic modular reactors, very high temperature reactors, fast spectrum reactors, others (fluidized bed, moving ignition zone concept). Liquid metal concepts were grouped in four major categories: Medium-to-large oxide-fueled systems; Medium-sized metal-fueled systems; Medium-sized Pb/Pb-Bi systems; Small-sized Pb/Pb-Bi systems. The three supporting technology areas were examined: Fuels (oxide, metal, nitride); Coolants (Na, Pb/Pb-Bi); Fuel Cycle (advanced aqueous, pyroprocess). Non-classical concepts were also grouped as follows: Eutectic metallic fuel; Molten salt fuel; Gas core reactor; Molten salt cooled/solid fuel; Organic cooled reactor; Solid conduction/heat pipe; Fission product direct energy conversion. The Technical working Groups are analyzing the candidate concepts for performance potential relative to the goals; and technology gaps

  14. Paul Scherrer Institut Scientific Report 2001. Volume IV: Nuclear Energy and Safety

    International Nuclear Information System (INIS)

    Smith, B. L.

    2002-03-01

    The year 2001 was marked by the extensive audit of energy research at PSI. The audit took place on 21/22 June, and nuclear energy research was evaluated by five international experts. It was possible to present the quality and relevance of our research in a convincing way. This, together with optimal use of the available resources in our department Nuclear Energy and Safety (NES), prompted the highly welcome result that the auditors attested a high degree of scientific quality to the NES projects in general, with some of them judged to be of world-class standard. They recommended all audited projects be maintained, adequate resources to be allocated accordingly and, if necessary, an increase of public funding in nuclear energy research to be granted to achieve this. Finally, it was recommended that energy research should be explicitly mentioned in the statement of the ultimate mission of PSI. At the level of 'daily work', efforts in several directions related to the future of the Hotlab were one of the main focuses during the past year. On the one hand, the safety-related backfitting of the facility (particularly in regard to fire protection) has been continued, and was coupled with intensive planning studies, and with a thorough radiological cleaning of the labs; this invariably led to some impediment to the current research activities. Despite external burdens, which have led to some delays and additional costs, three of the four refurbishment phases have been completed, and the corresponding laboratories were brought back into operation after inspection and approval by the regulatory authority HSK. Given the size and complexity of the project, progress must be considered very satisfactory. A list of scientific publications in 2000 is also provided

  15. Paul Scherrer Institut Scientific Report 2001. Volume IV: Nuclear Energy and Safety

    Energy Technology Data Exchange (ETDEWEB)

    Smith, B.L. (ed.)

    2002-03-01

    The year 2001 was marked by the extensive audit of energy research at PSI. The audit took place on 21/22 June, and nuclear energy research was evaluated by five international experts. It was possible to present the quality and relevance of our research in a convincing way. This, together with optimal use of the available resources in our department Nuclear Energy and Safety (NES), prompted the highly welcome result that the auditors attested a high degree of scientific quality to the NES projects in general, with some of them judged to be of world-class standard. They recommended all audited projects be maintained, adequate resources to be allocated accordingly and, if necessary, an increase of public funding in nuclear energy research to be granted to achieve this. Finally, it was recommended that energy research should be explicitly mentioned in the statement of the ultimate mission of PSI. At the level of 'daily work', efforts in several directions related to the future of the Hotlab were one of the main focuses during the past year. On the one hand, the safety-related backfitting of the facility (particularly in regard to fire protection) has been continued, and was coupled with intensive planning studies, and with a thorough radiological cleaning of the labs; this invariably led to some impediment to the current research activities. Despite external burdens, which have led to some delays and additional costs, three of the four refurbishment phases have been completed, and the corresponding laboratories were brought back into operation after inspection and approval by the regulatory authority HSK. Given the size and complexity of the project, progress must be considered very satisfactory. A list of scientific publications in 2000 is also provided.

  16. Nuclear proliferation and civilian nuclear power. Report of the Nonproliferation Alternative Systems Assessment Program. Volume IV. Commercial potential

    Energy Technology Data Exchange (ETDEWEB)

    1980-06-01

    This volume of the Nonproliferation Alternative Systems Assessment Program (NASAP) report provides time and cost estimates for positioning new nuclear power systems for commercial deployment. The assessment also estimates the rates at which the new systems might penetrate the domestic market, assuming the continuing viability of the massive light-water reactor network that now exists worldwide. This assessment does not recommend specific, detailed program plans and budgets for individual systems; however, it is clear from this analysis that any of the systems investigated could be deployed if dictated by national interest.

  17. Nuclear proliferation and civilian nuclear power. Report of the Nonproliferation Alternative Systems Assessment Program. Volume IV. Commercial potential

    International Nuclear Information System (INIS)

    1980-06-01

    This volume of the Nonproliferation Alternative Systems Assessment Program (NASAP) report provides time and cost estimates for positioning new nuclear power systems for commercial deployment. The assessment also estimates the rates at which the new systems might penetrate the domestic market, assuming the continuing viability of the massive light-water reactor network that now exists worldwide. This assessment does not recommend specific, detailed program plans and budgets for individual systems; however, it is clear from this analysis that any of the systems investigated could be deployed if dictated by national interest

  18. Validation of nuclear criticality safety software and 27 energy group ENDF/B-IV cross sections. Revision 1

    International Nuclear Information System (INIS)

    Lee, B.L. Jr.; D'Aquila, D.M.

    1996-01-01

    The original validation report, POEF-T-3636, was documented in August 1994. The document was based on calculations that were executed during June through August 1992. The statistical analyses in Appendix C and Appendix D were completed in October 1993. This revision is written to clarify the margin of safety being used at Portsmouth for nuclear criticality safety calculations. This validation gives Portsmouth NCS personnel a basis for performing computerized KENO V.a calculations using the Lockheed Martin Nuclear Criticality Safety Software. The first portion of the document outlines basic information in regard to validation of NCSS using ENDF/B-IV 27-group cross sections on the IBM3090 at ORNL. A basic discussion of the NCSS system is provided, some discussion on the validation database and validation in general. Then follows a detailed description of the statistical analysis which was applied. The results of this validation indicate that the NCSS software may be used with confidence for criticality calculations at the Portsmouth Gaseous Diffusion Plant. For calculations of Portsmouth systems using the specified codes and systems covered by this validation, a maximum k eff including 2σ of 0.9605 or lower shall be considered as subcritical to ensure a calculational margin of safety of 0.02. The validation of NCSS on the IBM 3090 at ORNL was extended to include NCSS on the IBM 3090 at K-25

  19. Paul Scherrer Institut Scientific Report 2002. Volume IV: Nuclear Energy and Safety

    Energy Technology Data Exchange (ETDEWEB)

    Smith, B; Gschwend, B [eds.

    2003-03-01

    the FIT Board. The planning document is currently in circulation for comment. PSI has updated its 'Guiding Principles' to include its own research capabilities, in particular in regard to sustainable energy technologies. At the end of an intensive 'bottom-up approach', an R+D planning document for the year 2003 has been issued for the first time by NES; this exercise should be formalised in a more compact form in the future. Backfitting of the Hot Lab has been completed in 4 years, at a cost of 14 MCHF (compared with the initial estimates of 3 years and 9.8 MCHF); the NPP operators have agreed to contribute to the Hot Lab infrastructure costs to the extent of 3 MCHF per annum. With regard to education and training, in view of the necessity to maintain a continuous education programme in nuclear technology at university level, the Swiss utilities have conditionally agreed, following the retirement of Prof. Yadigaroglu, to fund an ETHZ Chair in Nuclear (Systems) Engineering. The appointee will become a central part of the new Master of Nuclear Engineering programme, to be offered by ETHZ and EPFL, and will be given the opportunity by NES to perform large-scale research at PSI. The new Masters programme will become an integral part of the emerging European Network on Nuclear Energy (ENEN). At the technical teaching level, PSI's own Technical School for reactor operators has, after some years of reduced participation, again registered an increase in the number of students: in 2002, courses had to be offered on an annual basis, instead of every 2 years, in response to the increased demand. A publication list for 2002 is also provided. (author)

  20. Paul Scherrer Institut Scientific Report 2002. Volume IV: Nuclear Energy and Safety

    Energy Technology Data Exchange (ETDEWEB)

    Smith, B.; Gschwend, B. (eds.)

    2003-03-01

    contributions have been accepted by the FIT Board. The planning document is currently in circulation for comment. PSI has updated its 'Guiding Principles' to include its own research capabilities, in particular in regard to sustainable energy technologies. At the end of an intensive 'bottom-up approach', an R+D planning document for the year 2003 has been issued for the first time by NES; this exercise should be formalised in a more compact form in the future. Backfitting of the Hot Lab has been completed in 4 years, at a cost of 14 MCHF (compared with the initial estimates of 3 years and 9.8 MCHF); the NPP operators have agreed to contribute to the Hot Lab infrastructure costs to the extent of 3 MCHF per annum. With regard to education and training, in view of the necessity to maintain a continuous education programme in nuclear technology at university level, the Swiss utilities have conditionally agreed, following the retirement of Prof. Yadigaroglu, to fund an ETHZ Chair in Nuclear (Systems) Engineering. The appointee will become a central part of the new Master of Nuclear Engineering programme, to be offered by ETHZ and EPFL, and will be given the opportunity by NES to perform large-scale research at PSI. The new Masters programme will become an integral part of the emerging European Network on Nuclear Energy (ENEN). At the technical teaching level, PSI's own Technical School for reactor operators has, after some years of reduced participation, again registered an increase in the number of students: in 2002, courses had to be offered on an annual basis, instead of every 2 years, in response to the increased demand. A publication list for 2002 is also provided. (author)

  1. GenBank

    OpenAIRE

    Benson, Dennis A.; Karsch-Mizrachi, Ilene; Lipman, David J.; Ostell, James; Rapp, Barbara A.; Wheeler, David L.

    2002-01-01

    The GenBank sequence database incorporates publicly available DNA sequences of more than 105 000 different organisms, primarily through direct submission of sequence data from individual laboratories and large-scale sequencing projects. Most submissions are made using the BankIt (web) or Sequin programs and accession numbers are assigned by GenBank staff upon receipt. Data exchange with the EMBL Data Library and the DNA Data Bank of Japan helps ensure comprehensive worldwide coverage. GenBank...

  2. Study of a fuel assembly for the nuclear reactor of IV generation cooled with supercritical water

    International Nuclear Information System (INIS)

    Barragan M, A.; Martin del Campo M, C.; Francois L, J. L.; Espinosa P, G.

    2011-11-01

    In this work a neutron study is presented about a square assembly design of double line of fuel rods, with moderator box to the center of the arrangement, for a nuclear reactor cooled with supercritical water (SCWR). The SCWR reactor was chosen by the characteristics of its design, mainly because is based in light water reactors (PWR and BWR), and the operational experience that has of them allow to use models and similar programs to simulate the fuel and the nucleus of this type of reactors. To develop the necessary models and to carry out the design and analysis of the SCWR reactor, the neutron codes MCNPX and Helios were used. The reason of using both codes, is because the code MCNPX used thoroughly in the neutron simulation of these reactors, it has been our reference code to analyze the results obtained with the Helios code which results are more efficient because its calculation times are minors. In the nucleus design the same parameters for both codes were considered. The results show that the design with Helios is a viable option to simulate these reactors since their values of the neutrons multiplication factor are very similar to those obtained with MCNPX. On the other hand, it could be corroborated that the CASMO-4 code is inadequate to simulate the fuel to the temperature conditions and water pressure in the SCWR. (Author)

  3. Fault diagnosis of generation IV nuclear HTGR components – Part II: The area error enthalpy–entropy graph approach

    International Nuclear Information System (INIS)

    Rand, C.P. du; Schoor, G. van

    2012-01-01

    Highlights: ► Different uncorrelated fault signatures are derived for HTGR component faults. ► A multiple classifier ensemble increases confidence in classification accuracy. ► Detailed simulation model of system is not required for fault diagnosis. - Abstract: The second paper in a two part series presents the area error method for generation of representative enthalpy–entropy (h–s) fault signatures to classify malfunctions in generation IV nuclear high temperature gas-cooled reactor (HTGR) components. The second classifier is devised to ultimately address the fault diagnosis (FD) problem via the proposed methods in a multiple classifier (MC) ensemble. FD is realized by way of different input feature sets to the classification algorithm based on the area and trajectory of the residual shift between the fault-free and the actual operating h–s graph models. The application of the proposed technique is specifically demonstrated for 24 single fault transients considered in the main power system (MPS) of the Pebble Bed Modular Reactor (PBMR). The results show that the area error technique produces different fault signatures with low correlation for all the examined component faults. A brief evaluation of the two fault signature generation techniques is presented and the performance of the area error method is documented using the fault classification index (FCI) presented in Part I of the series. The final part of this work reports the application of the proposed approach for classification of an emulated fault transient in data from the prototype Pebble Bed Micro Model (PBMM) plant. Reference data values are calculated for the plant via a thermo-hydraulic simulation model of the MPS. The results show that the correspondence between the fault signatures, generated via experimental plant data and simulated reference values, are generally good. The work presented in the two part series, related to the classification of component faults in the MPS of different

  4. From a LWR monoculture to a synergistic use of nuclear systems. Introducing a new way of looking at GEN-IV economics

    International Nuclear Information System (INIS)

    Laeuferts, U.; Heek, A. van; Anderluh, J.

    2009-01-01

    The authors discuss the value that fast reactor technologies add to the current LWR design by hedging against uncertainties in the front-end and back-end of the fuel cycle. Using Monte Carlo simulation for these underlying uncertainties in fuel cycle costs the authors found in a first explorative attempt an approximation for the real option value. The model oversimplifies the demand/supply site of the fuel cycle services and is not exhaustive concerning all fuel cycle options, but gives first impression over the benefits of introducing real option thinking.Future work could give a good indication about the thresholds of fuel cycle services and transaction costs, including the development and timing of additional reprocessing and fuel fabrication plants.

  5. Multiaxial Creep-Fatigue and Creep-Ratcheting Failures of Grade 91 and Haynes 230 Alloys Toward Addressing Design Issues of Gen IV Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Hassan, Tasnim [North Carolina State Univ., Raleigh, NC (United States); Lissenden, Cliff [Penn State Univ., University Park, PA (United States); Carroll, Laura [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-04-01

    The proposed research will develop systematic sets of uniaxial and multiaxial experimental data at a very high temperature (850-950°C) for Alloy 617. The loading histories to be prescribed in the experiments will induce creep-fatigue and creep-ratcheting failure mechanisms. These experimental responses will be scrutinized in order to quantify the influences of temperature and creep on fatigue and ratcheting failures. A unified constitutive model (UCM) will be developed and validated against these experimental responses. The improved UCM will be incorporated into the widely used finite element commercial software packages ANSYS. The modified ANSYS will be validated so that it can be used for evaluating the very high temperature ASME-NH design-by-analysis methodology for Alloy 617 and thereby addressing the ASME-NH design code issues.

  6. Multiaxial Creep-Fatigue and Creep-Ratcheting Failures of Grade 91 and Haynes 230 Alloys Toward Addressing Design Issues of Gen IV Nuclear Power Plants

    International Nuclear Information System (INIS)

    Hassan, Tasnim; Lissenden, Cliff; Carroll, Laura

    2015-01-01

    The proposed research will develop systematic sets of uniaxial and multiaxial experimental data at a very high temperature (850-950°C) for Alloy 617. The loading histories to be prescribed in the experiments will induce creep-fatigue and creep-ratcheting failure mechanisms. These experimental responses will be scrutinized in order to quantify the influences of temperature and creep on fatigue and ratcheting failures. A unified constitutive model (UCM) will be developed and validated against these experimental responses. The improved UCM will be incorporated into the widely used finite element commercial software packages ANSYS. The modified ANSYS will be validated so that it can be used for evaluating the very high temperature ASME-NH design-by-analysis methodology for Alloy 617 and thereby addressing the ASME-NH design code issues.

  7. Policy-induced market introduction of Generation IV reactor systems

    International Nuclear Information System (INIS)

    Heek, Aliki Irina van; Roelofs, Ferry

    2011-01-01

    Almost 10 years ago the U.S. Department of Energy (DOE) started the Generation IV Initiative (GenIV) with 9 other national governments with a positive ground attitude towards nuclear energy. Some of these Generation IV systems, like the fast reactors, are nearing the demonstration stage. The question on how their market introduction will be implemented becomes increasingly urgent. One main topic for future reactor technologies is the treatment of radioactive waste products. Technological solutions to this issue are being developed. One possible process is the transformation of long-living radioactive nuclides into short living ones; a process known as transmutation, which can be done in a nuclear reactor only. Various Generation IV reactor concepts are suitable for this process, and of these systems most experience has been gained with the sodium-cooled fast reactor (SFR). However, both these first generation SFR plants and their Generation IV successors are designed as electricity generating plants, and therefore supposed to be commercially viable in the electricity markets. Various studies indicate that the generation costs of a combined LWR-(S)FR nuclear generating park (LWR: light water reactor) will be higher than that of an LWR-only park. To investigate the effects of the deployment of the different reactors and fuel cycles on the waste produced, resources used and costs incurred as a function of time, a dynamic fuel cycle assessment is performed. This study will focus on the waste impact of the introduction of a fraction of fast reactors in the European nuclear reactor park with a cost increase as described in the previous paragraph. The nuclear fuel cycle scenario code DANESS is used for this, as well as the nuclear park model of the EU-27 used for the previous study. (orig.)

  8. Nuclear technology options

    International Nuclear Information System (INIS)

    Salvatores, Massimo

    2013-01-01

    Different strategies and motivations in different countries have led to diverse options. In Europe the SNETP (Sustainable Nuclear Energy Technology Platform) has the objective of developing R&D supporting GEN-II (present) and GEN-III nuclear systems under development; allowing sustainability and minimisation of waste burden, promoting advanced Gen-IV Fast Reactors; and accounting for a Nuclear Cogeneration Industrial Initiative. A remarkable initiative in the USA has been the promotion of small modular reactors (SMRs) – at less than 300 MWe in capacity, much smaller than typical reactors – which can be an ideal choice for (remote) areas which cannot support a larger reactor. Compact scalable design offers a host of potential safety, construction and economic benefits. More “upbeat” strategies are expected in other areas of the world where significant increase in nuclear energy demand is predicted in the next decades. If this growth materialises, future fuel cycles characteristics, feasibility and acceptability will be crucial. This paper will discuss different scenarios for future fuel cycles, resources optimisation and/or waste minimization, the range from full fast reactor deployment to phase-out, management of spent nuclear fuel and the significant potential benefits of advanced cycles. The next 45 years will be dominated by deployment of standard large or medium size plants operating for 60 years. Available resources do allow it. However, fuel cycle will be a growing and most challenging issue and early assessments will be needed for public acceptance and policy decisions.

  9. Proceedings of NUCLEAR 2016 the 9th annual international conference on sustainable development through nuclear research and education. Part 1/3

    International Nuclear Information System (INIS)

    Paraschiv, Irina Maria

    2016-01-01

    The Proceedings of the NUCLEAR 2016 international conference on sustainable development through nuclear research and education held at INR-Pitesti on May, 18-20, contain 81 communications presented in two plenary sessions and three sections addressing the themes of Nuclear energy, Environmental protection and Sustainable development. This section (Part 1/3) are addressing the following items: Section 1.1 Nuclear safety and severe accidents (6 papers); Section 1.2 Nuclear reactors and gen. IV (7 papers); Section 1.3 Nuclear technology and materials (29 papers); These papers are presented as abstracts in 'Nuclear 2016 - Book of Abstracts', separately processed

  10. Generation IV nuclear energy systems and hydrogen economy. New progress in the energy field in the 21st century

    International Nuclear Information System (INIS)

    Zang Mingchang

    2004-01-01

    The concept of hydrogen economy was initiated by the United States and other developed countries in the turn of the century to mitigate anxiety of national security due to growing dependence on foreign sources of energy and impacts on air quality and the potential effects of greenhouse gas emissions. Hydrogen economy integrates the primary energy used to produce hydrogen as a future energy carrier, hydrogen technologies including production, delivery and storage, and various fuel cells for transportation and stationary applications. A new hydrogen-based energy system would created as an important solution in the 21st century, flexible, affordable, safe, domestically produced, used in all sectors of the economy and in all regions of the country, if all the R and D plans and the demonstration come to be successful in 20-30 years. Among options of primary energy. Generation IV nuclear energy under development is particularly well suited to hydrogen production, offering the competitive position of large-scale hydrogen production with near-zero emissions. (author)

  11. Final Design for an International Intercomparison Exercise for Nuclear Accident Dosimetry at the DAF Using Godiva-IV: IER-148 CED-2 Report

    Energy Technology Data Exchange (ETDEWEB)

    Heinrichs, Dave [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Beller, Tim [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Burch, Jennifer [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Cummings, Rick [National Security Technologies, LLC. (NSTec), Mercury, NV (United States) Nevada National Security Site; Duluc, Matthieu [Inst. de Radioprotection et de Sûrete Nucleaire (ISRN), Fontenay-aux-Roses (France); Gadd, Milan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Goda, Joetta [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Hickman, David [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); McAvoy, Doug [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Rathbone, Bruce [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sullivan, Randy [Savannah River Site (SRS), Aiken, SC (United States); Trompier, Francois [Inst. de Radioprotection et de Sûrete Nucleaire (ISRN), Fontenay-aux-Roses (France); Veinot, Ken [Y-12 National Security Complex, Oak Ridge, TN (United States); Ward, Dann [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Will, Rashelle [National Security Technologies, LLC. (NSTec), Mercury, NV (United States) Nevada National Security Site; Wilson, Chris [Atomic Weapons Establishment (AWE), Berkshire (United Kingdom); Zieziulewicz, Thomas [Knolls Atomic Power Lab. (KAPL), Niskayuna, NY (United States)

    2014-09-30

    This document is the Final Design (CED-2) Report for IER-148, “International Inter-comparison Exercise for Nuclear Accident Dosimetry at the DAF Using Godiva-IV.” The report describes the structure of the exercise consisting of three irradiations; identifies the participating laboratories and their points of contact; provides the details of all dosimetry elements and their placement in proximity to Godiva-IV on support stands or phantoms ; and lists the counting and spectroscopy equipment each laboratory will utilize in the Mercury NAD Lab. The exercise is tentatively scheduled for one week in August 2015.

  12. A Study on intensifying efficiency for international collaborative development of Advanced Nuclear Energy Technology

    Energy Technology Data Exchange (ETDEWEB)

    Hahn, Dohee; Park, Seongwon; Chang, Moonhee

    2013-08-15

    All the countries of the world are promoting the use of atomic energy to provide against high oil prices, climatic changes, and energy security initiative. A domestic and foreign environment for nuclear energy is changing rapidly and 13 leading countries including Korea are trying to develop advanced technologies on Gen IV nuclear energy system through Gen IV International Forum (GIF). To enhance the effectiveness of the future nuclear energy system development plan, a strategic approach is necessary for GIF program and the connection process with the 4th Nuclear Energy Promotion Program and Nuclear Energy R and D Medium and Long Term 5 year Plan for 2012 ∼ 2016 needs to be prepared. This study was to analyze the global nuclear trends of 2012 and the status of GIF program which is international cooperation activities. Also we examined the domestic R and D status of future nuclear energy systems for developing core technology and commercialization of Gen-IV nuclear energy system. A successful performance of this project enables the effective national cooperation with GIF and promotes the public acceptance by suggesting the technical alternatives for the nuclear safety and the spent fuel management.

  13. Review on Korea Participation of Generation IV International Forum (GIF)

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jewhan; Jeong, Ji-Young; Hahn, Dohee [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2015-05-15

    Generation IV International Forum (GIF) originates from US proposal of an initiative in 2000. The vision was to leapfrog LWR technology and collaborate with international partners to share R and D on advanced nuclear systems. Nine countries and EU joined the initiative and Gen IV concept was defined via technology goals and legal framework. Two years study with more than 100 experts worldwide has evaluated nearly 100 reactor designs and down selected six most promising concepts. In 2005, the first signatures on Framework Agreement were collected and the first research projects were defined in 2006. Korea is one of the founding members of GIF and actively participating in various areas. In 2013, TD was assigned to Korean expert and Korea is endeavoring to enhance the benefit of participation since this turning point. In this paper, pros and cons of engaging with GIF were briefly introduced and items to maximize the benefit were suggested.

  14. Review on Korea Participation of Generation IV International Forum (GIF)

    International Nuclear Information System (INIS)

    Lee, Jewhan; Jeong, Ji-Young; Hahn, Dohee

    2015-01-01

    Generation IV International Forum (GIF) originates from US proposal of an initiative in 2000. The vision was to leapfrog LWR technology and collaborate with international partners to share R and D on advanced nuclear systems. Nine countries and EU joined the initiative and Gen IV concept was defined via technology goals and legal framework. Two years study with more than 100 experts worldwide has evaluated nearly 100 reactor designs and down selected six most promising concepts. In 2005, the first signatures on Framework Agreement were collected and the first research projects were defined in 2006. Korea is one of the founding members of GIF and actively participating in various areas. In 2013, TD was assigned to Korean expert and Korea is endeavoring to enhance the benefit of participation since this turning point. In this paper, pros and cons of engaging with GIF were briefly introduced and items to maximize the benefit were suggested

  15. RETRACTED: Nuclear Materials IV

    International Nuclear Information System (INIS)

    Degueldre, C.

    2011-01-01

    This article has been retracted: please see Elsevier Policy on Article Withdrawal ( (http://www.elsevier.com/locate/withdrawalpolicy)). This article has been retracted at the request of the Publisher. This document was mistakenly published instead of the editorial of this special issue. The correct editorial is published in J. Nucl. Mater., 419 (2011) 398, (http://dx.doi.org/10.1016/j.jnucmat.2011.11.033). Apologies are offered to the guest editors and to readers of the Journal that this error was not detected during the production process.

  16. GenBank

    OpenAIRE

    Benson, Dennis A.; Karsch-Mizrachi, Ilene; Lipman, David J.; Ostell, James; Wheeler, David L.

    2006-01-01

    GenBank (R) is a comprehensive database that contains publicly available nucleotide sequences for more than 240 000 named organisms, obtained primarily through submissions from individual laboratories and batch submissions from large-scale sequencing projects. Most submissions are made using the web-based BankIt or standalone Sequin programs and accession numbers are assigned by GenBank staff upon receipt. Daily data exchange with the EMBL Data Library in Europe and the DNA Data Bank of Japan...

  17. GenBank

    OpenAIRE

    Benson, Dennis A.; Karsch-Mizrachi, Ilene; Lipman, David J.; Ostell, James; Sayers, Eric W.

    2008-01-01

    GenBank? is a comprehensive database that contains publicly available nucleotide sequences for more than 300 000 organisms named at the genus level or lower, obtained primarily through submissions from individual laboratories and batch submissions from large-scale sequencing projects. Most submissions are made using the web-based BankIt or standalone Sequin programs, and accession numbers are assigned by GenBank? staff upon receipt. Daily data exchange with the European Molecular Biology Labo...

  18. GenBank

    OpenAIRE

    Benson, Dennis A.; Cavanaugh, Mark; Clark, Karen; Karsch-Mizrachi, Ilene; Lipman, David J.; Ostell, James; Sayers, Eric W.

    2012-01-01

    GenBank? (http://www.ncbi.nlm.nih.gov) is a comprehensive database that contains publicly available nucleotide sequences for almost 260 000 formally described species. These sequences are obtained primarily through submissions from individual laboratories and batch submissions from large-scale sequencing projects, including whole-genome shotgun (WGS) and environmental sampling projects. Most submissions are made using the web-based BankIt or standalone Sequin programs, and GenBank staff assig...

  19. FISA-2009 Conference on Euratom Research and Training Activities: Nuclear Fission - Past, Present and Future (Generation-II, -III and -IV + Partitioning and Transmutation)

    International Nuclear Information System (INIS)

    Bhatnagar, V.; Deffrennes, M.; Hugon, M.; Manolatos, P.; Ptackova, K.; Van Goethem, G.; Webster, S.

    2011-01-01

    This paper is an introduction to the research and training activities carried out under the Euratom 7th Framework Programme (FP7, 2007-2011) in the field of nuclear fission science and technology, covering in particular nuclear systems and safety, and including innovative reactor systems and partitioning and transmutation. It is based on the more than 40 invited lectures that were delivered by Euratom project coordinators and keynote speakers at the FISA-2009 Conference (), organised by the European Commission DG Research, 22-24 June 2009, Prague, Czech Republic. The Euratom programme must be considered in the context of current and future nuclear technology and the respective research effort: ·Generation-II (i.e. yesterday, NPP construction 1970-2000): safety and reliability of nuclear facilities and energy independence in order to ensure security of supply worldwide; ·Generation-III (i.e. today, construction 2000-2040+): continuous improvement of safety and reliability, and increased industrial competitiveness in a growing energy market; ·Generation-IV (i.e. tomorrow, construction from 2040) for increased sustainability though optimal utilisation of natural resources and waste minimisation, and increased proliferation resistance. Consequently, the focus of the lectures devoted to Generation-II and -III is on the major scientific challenges and technological developments needed to guarantee safety and reliability, in particular issues associated with plant lifetime extension and operation. The focus of the lectures devoted to Generation-IV is on the design objectives and associated research issues that have been agreed upon internationally, in particular the ambitious criteria and technology goals established at the international level by the Generation-IV International Forum (GIF). In the future, electricity must continue to be produced competitively, and in addition high temperature process heat may also be required, while exploiting a maximum of fissile and

  20. Nuclear Research Institute Rez view

    International Nuclear Information System (INIS)

    Biza, K.; Pazdera, F.; Vasa, I.; Zdarek, J.

    2004-01-01

    In this presentation author deals with the present state and perspectives of nuclear energy in the Czech Republic and in the Slovak Republic. It is concluded that lifetime extension and finalization of Mochovce NPP Units 3 and 4 is the cheapest solution for base load production of electricity and is in line with the European union energy challenges: - decrease of carbon dioxide emissions; dependence on energy sources from politically unstable regions; decrease import dependence on energy sources. Nuclear energy is one of important sources for long term sustainability in energy. GEN IV is successful with meet the new requirements after 2025. We should participate on this long term development effort

  1. Nuclear fuel technology - Determination of uranium in solutions, uranium hexafluoride and solids - Part 2: Iron(II) reduction/cerium(IV) oxidation titrimetric method

    International Nuclear Information System (INIS)

    2004-01-01

    This first edition of ISO 7097-1 together with ISO 7097-2:2004 cancels and replaces ISO 7097:1983, which has been technically revised, and ISO 9989:1996. ISO 7097 consists of the following parts, under the general title Nuclear fuel technology - Determination of uranium in solutions, uranium hexafluoride and solids: Part 1: Iron(II) reduction/potassium dichromate oxidation titrimetric method; Part 2: Iron(II) reduction/cerium(IV) oxidation titrimetric method. This part 2. of ISO 7097 describes procedures for determination of uranium in solutions, uranium hexafluoride and solids. The procedures described in the two independent parts of this International Standard are similar: this part uses a titration with cerium(IV) and ISO 7097-1 uses a titration with potassium dichromate

  2. Fast reactor development and worldwide cooperation in Generation-IV International Forum

    International Nuclear Information System (INIS)

    Sagayama, Yutaka

    2013-01-01

    Objectives of Gen-IV systems development: Goals: Four challenging technology goals have been defined to be applied to innovative nuclear reactor concepts in the 21st century: 1) Safety and Reliability (safe and reliable operation, no offsite emergency response); 2) Sustainability (effective fuel utilization, minimization of nuclear waste); 3) Proliferation Resistance & Physical Protection (to assure unattractive and the least desirable route for diversion or theft of weapons-usable materials, and provide increased physical protection against acts of terrorism); 4) Economic Competitiveness (life-cycle cost advantage over other energy resources). Phase: Each Generation-IV reactor system is one of three stages. 1) Viability Phase; 2) Performance Phase; 3) Demonstration Phase. Target: Commercial Deployment is expected around 2030s or beyond

  3. Biologically relevant mono- and di-nuclear manganese II/III/IV complexes of mononegative pentadentate ligands

    DEFF Research Database (Denmark)

    Baffert, Carole; Collomb, Marie-Nöelle; Deronzier, Alain

    2003-01-01

    were characterised by UV-visible spectroscopy, ESI mass spectrometry and cyclic voltammetry. In addition, III-IV and II-III species were electrochemically generated. Thus the new mononegative pentadentate ligand systems display significant flexibility in the range of Mn oxidation states and species...

  4. The mammalian homologue of yeast Afg1 ATPase (lactation elevated 1) mediates degradation of nuclear-encoded complex IV subunits

    Czech Academy of Sciences Publication Activity Database

    Česneková, J.; Rodinová, M.; Hansíková, H.; Houštěk, Josef; Zeman, J.; Stibůrek, L.

    2016-01-01

    Roč. 473, č. 6 (2016), s. 797-804 ISSN 0264-6021 R&D Projects: GA ČR(CZ) GA13-07223S Institutional support: RVO:67985823 Keywords : complex IV * LACE1 * mitochondria * oxidative phosphorylation * YME1L Subject RIV: EB - Genetics ; Molecular Biology Impact factor: 3.797, year: 2016

  5. Nuclear Fuel Cycle System Analysis (I)

    Energy Technology Data Exchange (ETDEWEB)

    Ko, Won Il; Kwon, Eun Ha; Kim, Ho Dong; Yoon, Ji Sup; Park, Seong Won

    2006-12-15

    As a nation develops strategies that provide nuclear energy while meeting its various objectives, it must begin with identification of a fuel cycle option that can be best suitable for the country. For such a purpose, this paper takes four different fuel cycle options - Once-through Cycle, DUPIC Recycle, Thermal Reactor Recycle and GEN-IV Recycle, and evaluates each option in terms of sustainability, environment-friendliness, proliferation-resistance and economics. The analysis shows that the GEN-IV Recycle appears to have an advantage in terms of sustainability, environment-friendliness and long-term proliferation-resistance, while it is expected to be more economically competitive, if uranium ore prices increase or costs of pyroprocessing and fuel fabrication decrease.

  6. MACK-IV, a new version of MACK: a program to calculate nuclear response functions from data in ENDF/B format

    International Nuclear Information System (INIS)

    Abdou, M.A.; Gohar, Y.; Wright, R.Q.

    1978-07-01

    MACK-IV calculates nuclear response functions important to the neutronics analysis of nuclear and fusion systems. A central part of the code deals with the calculation of the nuclear response function for nuclear heating more commonly known as the kerma factor. Pointwise and multigroup neutron kerma factors, individual reactions, helium, hydrogen, and tritium production response functions are calculated from any basic nuclear data library in ENDF/B format. The program processes all reactions in the energy range of 0 to 20 MeV for fissionable and nonfissionable materials. The program also calculates the gamma production cross sections and the gamma production energy matrix. A built-in computational capability permits the code to calculate the cross sections in the resolved and unresolved resonance regions from resonance parameters in ENDF/B with an option for Doppler broadening. All energy pointwise and multigroup data calculated by the code can be punched, printed and/or written on tape files. Multigroup response functions (e.g., kerma factors, reaction cross sections, gas production, atomic displacements, etc.) can be outputted in the format of MACK-ACTIVITY-Table suitable for direct use with current neutron (and photon) transport codes

  7. DETEKSI GEN-GEN PENYANDI FAKTOR VIRULENSI PADA BAKTERI VIBRIO

    Directory of Open Access Journals (Sweden)

    Ince Ayu Khairani Kadriah

    2011-04-01

    menggunakan isolat bakteri yang diisolasi dari budidaya udang windu di berbagai daerah di Sulawesi Selatan dan Jawa. Pada penelitian ini digunakan primer spesifik untuk mendeteksi gen-gen virulen toxR gene, hemolysin (vvh gene, dan GyrB gene dengan metode PCR. Dari 35 isolat yang diisolasi, 20 isolat terdeteksi memiliki gen virulensi dan 8 di antaranya memiliki dua gen virulen. Spesies bakteri yang memiliki gen virulen adalah: V.harveyi, V. parahaemolyticus, V. mimicus, dan V. campbelli

  8. ETRAN 2002: Society for Electronics,Telecommunications, Computers, Automation and Nuclear Engineering. Section for Nuclear Techniques and Technology. Proceedings of the XLVI Conference. Vol IV

    International Nuclear Information System (INIS)

    Milosevic, M.; Jaksic, Z.; Bozic, D.; Potkonjak, V.

    2002-01-01

    The XLVI ETRAN Conference of the Society for Electronic, Telecommunications, Computers, Automation and Nuclear Engineering was held on 4-7 June, 2002. In the Proceedings of the Conference The Commission of the Nuclear Technique and Technology has 14 papers presented in three following sessions: 1. Actual problems in nuclear technologies; 2. Accelerator and reactor systems; and 3. Radiation protection and ionizing radiation uses

  9. Final Report on Design, Fabrication and Test of HANARO Instrumented Capsule (07M-13N) for the Researches of Irradiation Performance of Parts of X-Gen Nuclear Fuel Assembly

    Energy Technology Data Exchange (ETDEWEB)

    Choo, K. N.; Kim, B. G.; Kang, Y. H. (and others)

    2008-08-15

    An instrumented capsule of 07M-13N was designed, fabricated and irradiated for an evaluation of the neutron irradiation properties of the parts of a X-Gen nuclear fuel assembly for PWR requested by KNF. Some specimens of control rod materials of AP1000 reactor requested by Westinghouse Co. were inserted in this capsule as a preliminary irradiation test and Polyimide specimens requested by Hanyang university were also inserted. 463 specimens such as buckling and spring test specimens of cell spacer grid, tensile, microstructure and tensile of welded parts, irradiation growth, spring test specimens made of HANA tube, Zirlo, Zircaloy-4, Inconel-718, Polyimide, Ag and Ag-In-Cd alloys were placed in the capsule. During the irradiation test, the temperature of the specimens and the thermal/fast neutron fluences were measured by 14 thermocouples and 7 sets of neutron fluence monitors installed in the capsule. A new friction welded tube between STS304 and Al1050 alloys was introduced in the capsule to prevent a coolant leakage into a capsule during a capsule cutting process in HANARO. The capsule was irradiated for 95.19 days (4 cycles) in the CT test hole of HANARO of a 30MW thermal output at 230 {approx} 420 .deg. C. The specimens were irradiated up to a maximum fast neutron fluence of 1.27x10{sup 21}(n/cm{sup 2}) (E>1.0MeV) and the dpa of the irradiated specimens were evaluated as 1.21 {approx} 1.97. The irradiated specimens were tested to evaluate the irradiation performance of the parts of an X-Gen fuel assembly in the IMEF hot cell and the obtained results will be very valuable for the related researches of the users.

  10. Design data and safety features of commercial nuclear power plants. Vol. IV. Dockets 50-452 through 50-503

    International Nuclear Information System (INIS)

    Heddleson, F.A.

    1975-03-01

    Design data, safety features, and site characteristics are summarized for 36 nuclear power units in 18 power stations in the United States. Six pages of data are presented for each plant consisting of thermal-hydraulic and nuclear factors, containment features, emergency-core-cooling systems, site features, circulating water system data, and miscellaneous factors. An aerial perspective is also presented for each plant. The volume covers reactors with dockets 50-452 through 50-503. (U.S.)

  11. Nuclear data processing for cross-sections generation for fusion-fission, ADS, and IV generation reactors utilization

    Energy Technology Data Exchange (ETDEWEB)

    Velasquez, Carlos E.; Fernandes, Lorena C.; Pereira, Claubia; Veloso, Maria Auxiliadora F.; Costa, Antonella L. [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Departamento de Engenharia Nuclear

    2017-11-01

    One of the mains topics about nuclear reactors is the microscopic cross section for incident neutrons. Therefore, in this work, it is evaluated the microscopic and macroscopic cross section for a nuclide and a material. One of the nuclides microscopic cross-section studied is the {sup 56}Fe which is the highest compound from the material macroscopic cross section studied SS316. On the other hand, it was studied the microscopic cross section of the {sup 242}Pu which is one of the nuclides that composes the nuclear fuel. The nuclear fuel chosen is a spent fuel reprocessed by UREX+ technique and spiked with thorium with 20% of fissile material. Therefore it was studied the macroscopic cross section from this nuclear fuel. Both of them were compared by using three different ways to reprocess the nuclides, one for LWR, another for ADS and the last one for Fusion reactors. The library used was JEFF-3.2 recommend for the reactors studied. The comparison was made at 1200 K for the nuclear fuel and 700K for the SS316.The results present differences due to the energy discretization, the number of groups chosen for each reactor and some nuclear reactions taken into consideration according to the neutron spectrum for each reactor. The nuclides were processed by NJOY99.364 and plotted with MCNP-Vised. (author)

  12. Nuclear data processing for cross-sections generation for fusion-fission, ADS, and IV generation reactors utilization

    International Nuclear Information System (INIS)

    Velasquez, Carlos E.; Fernandes, Lorena C.; Pereira, Claubia; Veloso, Maria Auxiliadora F.; Costa, Antonella L.

    2017-01-01

    One of the mains topics about nuclear reactors is the microscopic cross section for incident neutrons. Therefore, in this work, it is evaluated the microscopic and macroscopic cross section for a nuclide and a material. One of the nuclides microscopic cross-section studied is the 56 Fe which is the highest compound from the material macroscopic cross section studied SS316. On the other hand, it was studied the microscopic cross section of the 242 Pu which is one of the nuclides that composes the nuclear fuel. The nuclear fuel chosen is a spent fuel reprocessed by UREX+ technique and spiked with thorium with 20% of fissile material. Therefore it was studied the macroscopic cross section from this nuclear fuel. Both of them were compared by using three different ways to reprocess the nuclides, one for LWR, another for ADS and the last one for Fusion reactors. The library used was JEFF-3.2 recommend for the reactors studied. The comparison was made at 1200 K for the nuclear fuel and 700K for the SS316.The results present differences due to the energy discretization, the number of groups chosen for each reactor and some nuclear reactions taken into consideration according to the neutron spectrum for each reactor. The nuclides were processed by NJOY99.364 and plotted with MCNP-Vised. (author)

  13. A Study on planning of the international collaboration foundation for the Advanced Nuclear Technology Development Project

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Moon Hee; Kim, H. R.; Kim, H. J. and others

    2005-03-15

    Korea has participated in the international collaboration programs for the development of future nuclear energy systems driven by the countries holding advanced nuclear technology and Korea and U.S. have cooperated in the INERI. This study aimed mainly at developing the plan for participation in the collaborative development of the Gen IV, searching the participation strategy for INERI and the INPRO, and the international cooperation in these programs. Contents and scope of the study for successful achievement are as follows; Investigation and analysis of international and domestic trends related to advanced nuclear technologies, Development of the plan for collaborative development of the Gen IV and conducting the international cooperation activities, Support for the activities related to I-NERI between Korea and U.S. and conducting the international cooperation, International cooperation activities for the INPRO. This study can be useful for planning the research plan and setting up of the strategy of integrating the results of the international collaboration and the domestic R and D results by combining the Gen IV and the domestic R and D in the field of future nuclear technology. Futhermore, this study can contribute to establishing the effective foundation and broadening the cooperation activities not only with the advanced countries for acquisition of the advanced technologies but also with the developing countries for the export of the domestic nuclear energy systems.

  14. A Study on planning of the international collaboration foundation for the Advanced Nuclear Technology Development Project

    International Nuclear Information System (INIS)

    Chang, Moon Hee; Kim, H. R.; Kim, H. J. and others

    2005-03-01

    Korea has participated in the international collaboration programs for the development of future nuclear energy systems driven by the countries holding advanced nuclear technology and Korea and U.S. have cooperated in the INERI. This study aimed mainly at developing the plan for participation in the collaborative development of the Gen IV, searching the participation strategy for INERI and the INPRO, and the international cooperation in these programs. Contents and scope of the study for successful achievement are as follows; Investigation and analysis of international and domestic trends related to advanced nuclear technologies, Development of the plan for collaborative development of the Gen IV and conducting the international cooperation activities, Support for the activities related to I-NERI between Korea and U.S. and conducting the international cooperation, International cooperation activities for the INPRO. This study can be useful for planning the research plan and setting up of the strategy of integrating the results of the international collaboration and the domestic R and D results by combining the Gen IV and the domestic R and D in the field of future nuclear technology. Futhermore, this study can contribute to establishing the effective foundation and broadening the cooperation activities not only with the advanced countries for acquisition of the advanced technologies but also with the developing countries for the export of the domestic nuclear energy systems

  15. Theoretical analysis of nuclear reactors (Phase III), I-V, Part IV, Influence of isotopic composition of nuclear fuel on the reactivity with constant flux; Razrada metoda teorijske analize nuklearnih reaktora (III faza) I-IV, IV Deo, Uticaj promene izotopnog sastava goriva na reaktivnost uz konstantan fluks

    Energy Technology Data Exchange (ETDEWEB)

    Pop-Jordanov, J [Institute of Nuclear Sciences Boris Kidric, Vinca, Beograd (Serbia and Montenegro)

    1963-01-15

    Part one of this report presents a series of differential equations describing the nuclear fuel depletion during reactor operation. This series of differential equations is extended to describe the fission products. This part includes equations for effective multiplication factor k{sub eff} and reactivity {rho} as a function of irradiation {tau}. Part two includes results obtained on the analog computer PACE 231 R, and related to Calder Hall type reactor. Part three covers detailed preparation of the series of equations for solution by using the analog computer. Part four includes the list of references related to this task.

  16. GenBank.

    OpenAIRE

    Benson, D; Lipman, D J; Ostell, J

    1993-01-01

    The GenBank sequence database has undergone an expansion in data coverage, annotation content and the development of new services for the scientific community. In addition to nucleotide sequences, data from the major protein sequence and structural databases, and from U.S. and European patents is now included in an integrated system. MEDLINE abstracts from published articles describing the sequences provide an important new source of biological annotation for sequence entries. In addition to ...

  17. Lysine 271 but not lysine 210 of XRCC4 is required for the nuclear localization of XRCC4 and DNA ligase IV

    Energy Technology Data Exchange (ETDEWEB)

    Fukuchi, Mikoto; Wanotayan, Rujira; Liu, Sicheng; Imamichi, Shoji; Sharma, Mukesh Kumar; Matsumoto, Yoshihisa, E-mail: yoshim@nr.titech.ac.jp

    2015-06-12

    XRCC4 and DNA Ligase IV (LIG4) cooperate to join two DNA ends at the final step of DNA double-strand break (DSB) repair through non-homologous end-joining (NHEJ). However, it is not fully understood how these proteins are localized to the nucleus. Here we created XRCC4{sup K271R} mutant, as Lys271 lies within the putative nuclear localization signal (NLS), and XRCC4{sup K210R} mutant, as Lys210 was reported to undergo SUMOylation, implicated in the nuclear localization of XRCC4. Wild-type and mutated XRCC4 with EGFP tag were introduced into HeLa cell, in which endogenous XRCC4 had been knocked down using siRNA directed to 3′-untranslated region, and tested for the nuclear localization function by fluorescence microscopy. XRCC4{sup K271R} was defective in the nuclear localization of itself and LIG4, whereas XRCC4{sup K210R} was competent for the nuclear localization with LIG4. To examine DSB repair function, wild-type and mutated XRCC4 were introduced into XRCC4-deficient M10. M10-XRCC4{sup K271R}, but not M10-XRCC4{sup K210R}, showed significantly reduced surviving fraction after 2 Gy γ-ray irradiation as compared to M10-XRCC4{sup WT}. The number of γ-H2AX foci remaining 2 h after 2 Gy γ-ray irradiation was significantly greater in M10-XRCC4{sup K271R} than in M10-XRCC4{sup WT}, whereas it was only marginally increased in M10-XRCC4{sup K210R} as compared to M10-XRCC4{sup WT}. The present results collectively indicated that Lys271, but not Lys210, of XRCC4 is required for the nuclear localization of XRCC4 and LIG4 and that the nuclear localizing ability is essential for DSB repair function of XRCC4. - Highlights: • XRCC4{sup K271R} is defective in the nuclear localization of itself and LIG4. • XRCC4{sup K210R} is competent for the nuclear localization of itself and LIG4. • XRCC4{sup K271R} is deficient in DSB repair function. • XRCC4{sup K210R} is mostly normal in DSB repair function.

  18. Paul Scherrer Institut annual report 1994. Annex IV: PSI nuclear energy and safety research progress report 1994

    Energy Technology Data Exchange (ETDEWEB)

    Williams, T; Kallfelz, J M; Mathews, D [eds.; Paul Scherrer Inst. (PSI), Villigen (Switzerland)

    1995-10-01

    Nuclear energy research in Switzerland is concentrated at PSI. It is explicitly mentioned in the Institute`s official charter and commands about one fifth of the Institute`s federal resources. Presently, PSI invests approx. 200 py/a in nuclear energy research, one third of this being externally funded; the share of external funding in investment costs totals approx. 50%. This funding is provided by the Swiss utilities and the NAGRA, the Safety Authority (HSK) and the former National Fund for Energy Research (NEFF). PSI`s activities in nuclear research concentrate on three main areas: safety of operating plants, safety features of future reactor concepts and waste management. 7% of personnel are invested in addressing global aspects of energy. (author) figs., tabs., refs.

  19. Paul Scherrer Institut annual report 1994. Annex IV: PSI nuclear energy and safety research progress report 1994

    International Nuclear Information System (INIS)

    Williams, T.; Kallfelz, J.M.; Mathews, D.

    1995-01-01

    Nuclear energy research in Switzerland is concentrated at PSI. It is explicitly mentioned in the Institute's official charter and commands about one fifth of the Institute's federal resources. Presently, PSI invests approx. 200 py/a in nuclear energy research, one third of this being externally funded; the share of external funding in investment costs totals approx. 50%. This funding is provided by the Swiss utilities and the NAGRA, the Safety Authority (HSK) and the former National Fund for Energy Research (NEFF). PSI's activities in nuclear research concentrate on three main areas: safety of operating plants, safety features of future reactor concepts and waste management. 7% of personnel are invested in addressing global aspects of energy. (author) figs., tabs., refs

  20. ETRAN 1999: Society for Electronics,Telecommunications, Computers, Automation and Nuclear Engineering. Section for Nuclear Techniques and Technology. Proceedings of the XLIII Conference. Vol IV

    International Nuclear Information System (INIS)

    Spasojevic, D.; Smiljanic, M.; Bozic, D.; Stankovic, D.

    1999-01-01

    The XLIII ETRAN Conference of the Society for Electronic, Telecommunications, Computers, Automation and Nuclear Engineering was held on 20-22 Sep, 1999. In the Proceedings of the Conference The Commission of the Nuclear Technique and Technology has 19 papers presented in three sessions.

  1. Generation IV Nuclear Energy Systems Construction Cost Reductions through the use of Virtual Environments: Task 1 Completion Report

    International Nuclear Information System (INIS)

    Whisker, V.E.; Baratta, A.J.; Shaw, T.S.; Winters, J.W.; Trikouros, N.; Hess, C.

    2002-01-01

    OAK B204 The objective of this project is to demonstrate the feasibility and effectiveness of using full-scale virtual reality simulation in the design, construction, and maintenance of future nuclear power plants. Specifically, this project will test the suitability of Immersive Projection Display (IPD) technology to aid engineers in the design of the next generation nuclear power plant and to evaluate potential cost reductions that can be realized by optimization of installation and construction sequences. The intent is to see if this type of information technology can be used in capacities similar to those currently filled by full-scale physical mockups

  2. Generation IV Nuclear Energy Systems Construction Cost Reductions through the use of Virtual Environments: Task 1 Completion Report

    Energy Technology Data Exchange (ETDEWEB)

    Whisker, V.E.; Baratta, A.J.; Shaw, T.S.; Winters, J.W.; Trikouros, N.; Hess, C.

    2002-11-26

    OAK B204 The objective of this project is to demonstrate the feasibility and effectiveness of using full-scale virtual reality simulation in the design, construction, and maintenance of future nuclear power plants. Specifically, this project will test the suitability of Immersive Projection Display (IPD) technology to aid engineers in the design of the next generation nuclear power plant and to evaluate potential cost reductions that can be realized by optimization of installation and construction sequences. The intent is to see if this type of information technology can be used in capacities similar to those currently filled by full-scale physical mockups.

  3. Instruction by virtual reality to operation and security of a nuclear power plant of IV generation; Instruccion por realidad virtual a la operacion y seguridad de una central nuclear de generacion IV

    Energy Technology Data Exchange (ETDEWEB)

    Neri O, J. C.; Baltasar M, J.; Valle H, J. [Facultad de Ingenieria, Division de Estudios de Posgrado, Campus Morelos, UNAM, Paseo Cuauhnahuac 8532, Col. Progreso, 62550 Jiutepec, Morelos (Mexico)], e-mail: neriunam@ieee.org

    2009-10-15

    The purpose of LaNuVi project which is developing in the Engineering Faculty of National Autonomous University of Mexico, to have a virtual laboratory of nuclear reactors as tool of multidisciplinary education at basic and advanced levels in nuclear engineering area, involves training resources in audio visual and interactive form that allow to form a comprehension more realistic of operation of different systems and components. In this work is proposed to use educational resources, as the employees in the U.S. Army and in some centers of advanced education of medicine, where have been come proving concepts like projected reality, increased reality, tele transparency and others that present big benefits to learning-education process. The proposal here is to include the resource knew as serious game based learning. The focal point of stage that is presented is of a nuclear reactor PBMR like desalination and generator of controlled alternating energy and efficient that should put on in operation to allow the subsistence of a community in a desolated region of beginning second quarter of X XI century. For this purpose the designs are initiated and programmed several subsystems that allow the three-dimensional modeling of main components of a PBMR as well as of surrounding facilities. The obtained results and reaches of this design are presented. The product is in tests for a first version and it is hope to achieve a free and integral resource of national distribution for different cultural groups, interested in this type of advanced technology. (Author)

  4. Functional performance of the helical coil steam generator, Consolidated Nuclear Steam Generator (CNSG) IV system. Executive summary report

    International Nuclear Information System (INIS)

    Watson, G.B.

    1975-10-01

    The objective of this project was to study the functional performance of the CNSG - IV helical steam generator to demonstrate that the generator meets steady-state and transient thermal-hydraulic performance specifications and that secondary flow instability will not be a problem. Economic success of the CNSG concepts depends to a great extent on minimizing the size of the steam generator and the reactor vessel for ship installation. Also, for marine application the system must meet stringent specifications for operating stability, transient response, and control. The full-size two-tube experimental unit differed from the CNSG only in the number of tubes and the mode of primary flow. In general, the functional performance test demonstrated that the helical steam generator concept will exceed the specified superheat of 35F at 100% load. The experimental measured superheat at comparable operating conditions was 95F. Testing also revealed that available computer codes accurately predict trends and overall performance characteristics

  5. Status of the design and safety project for the sodium-cooled fast reactor as a generation IV nuclear energy system

    International Nuclear Information System (INIS)

    Niwa, Hajime; Fiorini, Gian-Luigi; Sim, Yoon-Sub; Lennox, Tom; Cahalan, James E.

    2005-01-01

    The Design and Safety Project Management Board (DSPMB) was established under the Sodium Cooled Fast Reactor (SFR) System Steering Committee (SSC) in the Generation IV international Forum. The DSPMB will promote collaborative R and D activities on reactor core design, and safety assessment for candidate systems, and also integrate these results together with those from other PMBs such as advanced fuel and component to a whole fast reactor system in order to develop high performance systems that will satisfy the goals of Generation IV nuclear energy systems. The DSPMB has formulated the present R and D schedules for this purpose. Two SFR concepts were proposed: a loop-type system with primarily a MOX fuel core and a pool-type system with a metal fuel core. Study of innovative systems and their evaluation will also be included. The safety project will cover both the safety assessment of the design and the preparation of the methods/tools to be used for the assessment. After a rather short viability phase, the project will move to the performance phase for development of performance data and design optimization of conceptual designs. This paper describes the schedules, work packages and tasks for the collaborative studies of the member countries. (author)

  6. GEN IV: Carbide Fuel Elaboration for the 'Futurix Concepts' experiment

    International Nuclear Information System (INIS)

    Vaudez, Stephane; Riglet-Martial, Chantal; Paret, Laurent; Abonneau, Eric

    2008-01-01

    In order to collect information on the behaviour of the future GFR (Gas Fast Reactor) fuel under fast neutron irradiation, an experimental irradiation program, called 'Futurix-concepts' has been launched at the CEA. The considered concept is a composite material made of a fissile fuel embedded in an inert ceramic matrix. Fissile fuel pellets are made of UPuN or UPuC while ceramics are SiC for the carbide fuel and TiN for the nitride fuel. This paper focuses on the description of the carbide composite fabrication. The UPuC pellets are manufactured using a metallurgical powder process. Fabrication and handling of the fuels are carried out in glove boxes under a nitrogen atmosphere. Carbide fuel is synthesized by carbo-thermic reduction under vacuum of a mixture of actinide oxide and graphitic carbon up to 1550 deg. C. After ball milling, the UPuC powder is pressed to create hexagonal or spherical compacts. They are then sintered up to 1750 deg. C in order to obtain a density of 85 % of the theoretical one. The sintered pellets are inserted into an inert and tight capsule of SiC. In order to control the gap between the fuel and the matrix precisely, the pellets are abraded. The inert matrix is then filled with the pellets and the whole system is sealed by a BRASiC R process at high temperature under a helium atmosphere. Fabrication of the sample to be irradiated was done in 2006 and the irradiation began in May 2007 in the Phenix reactor. This presentation will detail and discuss the results obtained during this fabrication phase. (authors)

  7. ETRAN '98: Society for Electronics,Telecommunications, Computers, Automation and Nuclear Engineering. Section for Nuclear Techniques and Technology. Proceedings of the XLII Conference. Vol IV

    International Nuclear Information System (INIS)

    Matausek, M.

    1998-01-01

    This volume 4, includes 29 papers presented at the Sessions on Nuclear science and technology of the ETRAN '98 conference. The topics covered were related to solving the problems of the spent fuels storage at the RA reactor, fuel management calculations, computation of neutron and photon spectra at the RA and RB reactors, applications of radiation sources in medicine and industry, radiation protection issues

  8. Study of a fuel assembly for the nuclear reactor of IV generation cooled with supercritical water; Estudio de un ensamble de combustible para el reactor nuclear de generacion IV enfriado con agua supercritica

    Energy Technology Data Exchange (ETDEWEB)

    Barragan M, A.; Martin del Campo M, C.; Francois L, J. L. [UNAM, Facultad de Ingenieria, Departamento de Sistemas Energeticos, Ciudad Universitaria, 04510 Mexico D. F. (Mexico); Espinosa P, G., E-mail: albrm29@yahoo.com [Universidad Autonoma Metropolitana, Unidad Iztapalapa, Area de Ingenieria en Recursos Energeticos, Av. San Rafael Atlixco 186, Col. Vicentina, 09340 Mexico D. F. (MX)

    2011-11-15

    In this work a neutron study is presented about a square assembly design of double line of fuel rods, with moderator box to the center of the arrangement, for a nuclear reactor cooled with supercritical water (SCWR). The SCWR reactor was chosen by the characteristics of its design, mainly because is based in light water reactors (PWR and BWR), and the operational experience that has of them allow to use models and similar programs to simulate the fuel and the nucleus of this type of reactors. To develop the necessary models and to carry out the design and analysis of the SCWR reactor, the neutron codes MCNPX and Helios were used. The reason of using both codes, is because the code MCNPX used thoroughly in the neutron simulation of these reactors, it has been our reference code to analyze the results obtained with the Helios code which results are more efficient because its calculation times are minors. In the nucleus design the same parameters for both codes were considered. The results show that the design with Helios is a viable option to simulate these reactors since their values of the neutrons multiplication factor are very similar to those obtained with MCNPX. On the other hand, it could be corroborated that the CASMO-4 code is inadequate to simulate the fuel to the temperature conditions and water pressure in the SCWR. (Author)

  9. Advanced Non-Destructive Assessment Technology to Determine the Aging of Silicon Containing Materials for Generation IV Nuclear Reactors

    Science.gov (United States)

    Koenig, T. W.; Olson, D. L.; Mishra, B.; King, J. C.; Fletcher, J.; Gerstenberger, L.; Lawrence, S.; Martin, A.; Mejia, C.; Meyer, M. K.; Kennedy, R.; Hu, L.; Kohse, G.; Terry, J.

    2011-06-01

    To create an in-situ, real-time method of monitoring neutron damage within a nuclear reactor core, irradiated silicon carbide samples are examined to correlate measurable variations in the material properties with neutron fluence levels experienced by the silicon carbide (SiC) during the irradiation process. The reaction by which phosphorus doping via thermal neutrons occurs in the silicon carbide samples is known to increase electron carrier density. A number of techniques are used to probe the properties of the SiC, including ultrasonic and Hall coefficient measurements, as well as high frequency impedance analysis. Gamma spectroscopy is also used to examine residual radioactivity resulting from irradiation activation of elements in the samples. Hall coefficient measurements produce the expected trend of increasing carrier concentration with higher fluence levels, while high frequency impedance analysis shows an increase in sample impedance with increasing fluence.

  10. FINESSE: study of the issues, experiments and facilities for fusion nuclear technology research and development. Interim report. Volume IV

    International Nuclear Information System (INIS)

    Abdou, M.

    1984-10-01

    This volume contains the following chapters (1) neutronics tests, (2) fluence considerations, (3) instrumentation and test matrix, (4) non-neutron test stands, (5) accelerator-based point neutron sources, (6) utilization of fission reactors, (7) tandem mirror test facilities, (8) tokamak fusion test facilities, (9) reliability development testing impacts on fusion reactor availability, and (10) fusion development scenarios. In addition, the following appendices are included: (1) evaluation of experience from fast breeder reactors, (2) observations of experts from the fission field, (3) evaluation of experience from the aerospace industry, (4) characterization of fusion nuclear systems operating environment, (5) modelling of MFTF-α+T high gamma mode performance, and (6) small-scale, multiple effects testing at US/DOE breeder reactor in-pile facilities

  11. A novel phylogeny of the Gelidiales (Rhodophyta) based on five genes including the nuclear CesA, with descriptions of Orthogonacladia gen. nov. and Orthogonacladiaceae fam. nov.

    Science.gov (United States)

    Boo, Ga Hun; Le Gall, Line; Miller, Kathy Ann; Freshwater, D Wilson; Wernberg, Thomas; Terada, Ryuta; Yoon, Kyung Ju; Boo, Sung Min

    2016-08-01

    Although the Gelidiales are economically important marine red algae producing agar and agarose, the phylogeny of this order remains poorly resolved. The present study provides a molecular phylogeny based on a novel marker, nuclear-encoded CesA, plus plastid-encoded psaA, psbA, rbcL, and mitochondria-encoded cox1 from subsets of 107 species from all ten genera within the Gelidiales. Analyses of individual and combined datasets support the monophyly of three currently recognized families, and reveal a new clade. On the basis of these results, the new family Orthogonacladiaceae is described to accommodate Aphanta and a new genus Orthogonacladia that includes species previously classified as Gelidium madagascariense and Pterocladia rectangularis. Acanthopeltis is merged with Gelidium, which has nomenclatural priority. Nuclear-encoded CesA was found to be useful for improving the resolution of phylogenetic relationships within the Gelidiales and is likely to be valuable for the inference of phylogenetic relationship among other red algal taxa. Copyright © 2016 Elsevier Inc. All rights reserved.

  12. Hepatic imaging in stage IV-S neuroblastoma

    International Nuclear Information System (INIS)

    Franken, E.A. Jr.; Smith, W.L.; Iowa Univ., Iowa City; Cohen, M.D.; Kisker, C.T.; Platz, C.E.

    1986-01-01

    Stage IV-S neuroblastoma describes a group of infants with tumor spread limited to liver, skin, or bone marrow. Such patients, who constitute about 25% of affected infants with neuroblastoma, may expect spontaneous tumor remission. We report 18 infants with Stage IV-S neuroblastoma, 83% of whom had liver involvement. Imaging investigations included Technetium 99m sulfur colloid scan, ultrasound, and CT. Two patterns of liver metastasis were noted: ill-defined nodules or diffuse tumor throughout the liver. Distinction of normal and abnormal liver with diffuse type metastasis could be quite difficult, particularly with liver scans. We conclude that patients with Stage IV-S neuroblastoma have ultrasound or CT examination as an initial workup, with nuclear medicine scans reserved for followup studies. (orig.)

  13. Advanced Computational Materials Science: Application to Fusion and Generation IV Fission Reactors (Workshop Report)

    Energy Technology Data Exchange (ETDEWEB)

    Stoller, RE

    2004-07-15

    The ''Workshop on Advanced Computational Materials Science: Application to Fusion and Generation IV Fission Reactors'' was convened to determine the degree to which an increased effort in modeling and simulation could help bridge the gap between the data that is needed to support the implementation of these advanced nuclear technologies and the data that can be obtained in available experimental facilities. The need to develop materials capable of performing in the severe operating environments expected in fusion and fission (Generation IV) reactors represents a significant challenge in materials science. There is a range of potential Gen-IV fission reactor design concepts and each concept has its own unique demands. Improved economic performance is a major goal of the Gen-IV designs. As a result, most designs call for significantly higher operating temperatures than the current generation of LWRs to obtain higher thermal efficiency. In many cases, the desired operating temperatures rule out the use of the structural alloys employed today. The very high operating temperature (up to 1000 C) associated with the NGNP is a prime example of an attractive new system that will require the development of new structural materials. Fusion power plants represent an even greater challenge to structural materials development and application. The operating temperatures, neutron exposure levels and thermo-mechanical stresses are comparable to or greater than those for proposed Gen-IV fission reactors. In addition, the transmutation products created in the structural materials by the high energy neutrons produced in the DT plasma can profoundly influence the microstructural evolution and mechanical behavior of these materials. Although the workshop addressed issues relevant to both Gen-IV and fusion reactor materials, much of the discussion focused on fusion; the same focus is reflected in this report. Most of the physical models and computational methods

  14. Updated Generation IV Reactors Integrated Materials Technology Program Plan, Revision 2

    Energy Technology Data Exchange (ETDEWEB)

    Corwin, William R [ORNL; Burchell, Timothy D [ORNL; Halsey, William [Lawrence Livermore National Laboratory (LLNL); Hayner, George [Idaho National Laboratory (INL); Katoh, Yutai [ORNL; Klett, James William [ORNL; McGreevy, Timothy E [ORNL; Nanstad, Randy K [ORNL; Ren, Weiju [ORNL; Snead, Lance Lewis [ORNL; Stoller, Roger E [ORNL; Wilson, Dane F [ORNL

    2005-12-01

    The Department of Energy's (DOE's) Generation IV Nuclear Energy Systems Program will address the research and development (R&D) necessary to support next-generation nuclear energy systems. Such R&D will be guided by the technology roadmap developed for the Generation IV International Forum (GIF) over two years with the participation of over 100 experts from the GIF countries. The roadmap evaluated over 100 future systems proposed by researchers around the world. The scope of the R&D described in the roadmap covers the six most promising Generation IV systems. The effort ended in December 2002 with the issue of the final Generation IV Technology Roadmap [1.1]. The six most promising systems identified for next generation nuclear energy are described within the roadmap. Two employ a thermal neutron spectrum with coolants and temperatures that enable hydrogen or electricity production with high efficiency (the Supercritical Water Reactor - SCWR and the Very High Temperature Reactor - VHTR). Three employ a fast neutron spectrum to enable more effective management of actinides through recycling of most components in the discharged fuel (the Gas-cooled Fast Reactor - GFR, the Lead-cooled Fast Reactor - LFR, and the Sodium-cooled Fast Reactor - SFR). The Molten Salt Reactor (MSR) employs a circulating liquid fuel mixture that offers considerable flexibility for recycling actinides, and may provide an alternative to accelerator-driven systems. A few major technologies have been recognized by DOE as necessary to enable the deployment of the next generation of advanced nuclear reactors, including the development and qualification of the structural materials needed to ensure their safe and reliable operation. Accordingly, DOE has identified materials as one of the focus areas for Gen IV technology development.

  15. Electron and nuclear dynamics of molecular clusters in ultraintense laser fields. IV. Coulomb explosion of molecular heteroclusters.

    Science.gov (United States)

    Last, Isidore; Jortner, Joshua

    2004-11-01

    In this paper we present a theoretical and computational study of the temporal dynamics and energetics of Coulomb explosion of (CD4)(n) and (CH4)(n) (n=55-4213) molecular heteroclusters in ultraintense (I=10(16)-10(19) W cm(-2)) laser fields, addressing the manifestation of electron dynamics, together with nuclear energetic and kinematic effects on the heterocluster Coulomb instability. The manifestations of the coupling between electron and nuclear dynamics were explored by molecular dynamics simulations for these heteroclusters coupled to Gaussian laser fields (pulse width tau=25 fs), elucidating outer ionization dynamics, nanoplasma screening effects (being significant for Icharges and masses. Nonuniform heterocluster Coulomb explosion (eta >1) manifests an overrun effect of the light ions relative to the heavy ions, exhibiting the expansion of two spatially separated subclusters, with the light ions forming the outer subcluster at the outer edge of the spatial distribution. Important features of the energetics of heterocluster Coulomb explosion originate from energetic triggering effects of the driving of the light ions by the heavy ions (C(4+) for I=10(17)-10(18) W cm(-2) and C(6+) for I=10(19) W cm(-2)), as well as for kinematic effects. Based on the CVI assumption, scaling laws for the cluster size (radius R(0)) dependence of the energetics of uniform Coulomb explosion of heteroclusters (eta=1) were derived, with the size dependence of the average (E(j,av)) and maximal (E(j,M)) ion energies being E(j,av)=aR(0) (2) and E(j,M)=(5a/3)R(0) (2), as well as for the ion energy distributions P(E(j)) proportional to E(j) (1/2); E(j)1) result in an isotope effect, predicting the enhancement (by 9%-11%) of E(H,av) for Coulomb explosion of (C(4+)H(4) (+))(eta) (eta=3) relative to E(D,av) for Coulomb explosion of (C(4+)D(4) (+))(eta) (eta=1.5), with the isotope effect being determined by the ratio of the kinematic parameters for the pair of Coulomb exploding clusters

  16. Multi-objective technico-economic optimization of energy conversion systems: hydrogen and electricity cogeneration from Generation IV nuclear reactor

    International Nuclear Information System (INIS)

    Gomez, A.

    2008-01-01

    With the increase in environmental considerations, such as the control of greenhouse emissions, and with the decrease in the fossil energy resources, hydrogen is currently considered as a promising energy vector. One of the main technological challenges of a future hydrogen economy is its large scale production without fossil fuel emissions. Under this context, nuclear energy is particularly adapted for hydrogen massive production by thermochemical cycles or high temperature electrolysis. One of the selected nuclear systems is the Very High Temperature Reactor (950 C/1200 C), cooled with helium, and dedicated to hydrogen production or to hydrogen electricity cogeneration. The main objective of this investigation, within the framework of a collaboration between CEA, French Atomic Agency (Cadarache) and LGC (Toulouse), consists in defining a technico-economic optimization methodology of electricity-hydrogen cogeneration systems, in order to identify and propose promising development strategies. Among the massive production processes of hydrogen, the thermochemical cycle Iodine-Sulphur has been considered. Taking into account the diversity of the used energies (i.e., heat and electricity) on the one hand and of the produced energies (hydrogen and electricity) on the other hand of the studied cogeneration system, an exergetic approach has been developed due to its ability to consider various energy forms on the same thermodynamical basis. The CYCLOP software tool (CEA) is used for the thermodynamic modelling of these systems. The economic criterion, calculated using the SEMER software tool (CEA), is based on the minimization of the total production site cost over its lifespan i.e., investment, operating costs and nuclear fuel cost. Capital investment involves the development of cost functions adapted to specific technologies and their specific operating conditions. The resulting optimization problems consist in maximizing the energy production, while minimizing the

  17. Communication received from the Resident Representatives of Germany, the Netherlands and the United Kingdom to the Agency concerning multilateral cooperation on energy security in support of Article IV of the Treaty on the Non-Proliferation of Nuclear Weapons

    International Nuclear Information System (INIS)

    2007-01-01

    The Director General has received a letter dated 13 September 2007 from the Resident Representatives of Germany, the Netherlands and the United Kingdom, attaching a declaration concerning multilateral cooperation on energy security in support of Article IV of the Treaty on the Non-Proliferation of Nuclear Weapons. The letter and, as requested therein, the declaration, are herewith circulated for information

  18. Nuclear Fuel Cycle System Analysis (II)

    Energy Technology Data Exchange (ETDEWEB)

    Ko, Won Il; Kwon, Eun Ha; Yoon, Ji Sup; Park, Seong Won

    2007-04-15

    As a nation develops strategies that provide nuclear energy while meeting its various objectives, it must begin with identification of a fuel cycle option that can be best suitable for the country. For such a purpose, this paper takes four different fuel cycle options that are likely adopted by the Korean government, considering the current status of nuclear power generation and the 2nd Comprehensive Nuclear Energy Promotion Plan (CNEPP) - Once-through Cycle, DUPIC Recycle, Thermal Reactor Recycle and GEN-IV Recycle. The paper then evaluates each option in terms of sustainability, environment-friendliness, proliferation-resistance, economics and technologies. Like all the policy decision, however, a nuclear fuel cycle option can not be superior in all aspects of sustainability, environment-friendliness, proliferation-resistance, economics, technologies and so on, which makes the comparison of the options extremely complicated. Taking this into consideration, the paper analyzes all the four fuel cycle options using the Multi-Attribute Utility Theory (MAUT) and the Analytic Hierarchy Process (AHP), methods of Multi-Attribute Decision Making (MADM), that support systematical evaluation of the cases with multi- goals or criteria and that such goals are incompatible with each other. The analysis shows that the GEN-IV Recycle appears to be most competitive.

  19. The Next Generation Fornax Survey (NGFS). IV. Mass and Age Bimodality of Nuclear Clusters in the Fornax Core Region

    Science.gov (United States)

    Ordenes-Briceño, Yasna; Puzia, Thomas H.; Eigenthaler, Paul; Taylor, Matthew A.; Muñoz, Roberto P.; Zhang, Hongxin; Alamo-Martínez, Karla; Ribbeck, Karen X.; Grebel, Eva K.; Ángel, Simón; Côté, Patrick; Ferrarese, Laura; Hilker, Michael; Lançon, Ariane; Mieske, Steffen; Miller, Bryan W.; Rong, Yu; Sánchez-Janssen, Ruben

    2018-06-01

    We present the analysis of 61 nucleated dwarf galaxies in the central regions (≲R vir/4) of the Fornax galaxy cluster. The galaxies and their nuclei are studied as part of the Next Generation Fornax Survey using optical imaging obtained with the Dark Energy Camera mounted at Blanco/Cerro Tololo Inter-American Observatory and near-infrared data obtained with VIRCam at VISTA/ESO. We decompose the nucleated dwarfs in nucleus and spheroid, after subtracting the surface brightness profile of the spheroid component and studying the nucleus using point source photometry. In general, nuclei are consistent with colors of confirmed metal-poor globular clusters, but with significantly smaller dispersion than other confirmed compact stellar systems in Fornax. We find a bimodal nucleus mass distribution with peaks located at {log}({{ \\mathcal M }}* /{M}ȯ )≃ 5.4 and ∼6.3. These two nucleus subpopulations have different stellar population properties: the more massive nuclei are older than ∼2 Gyr and have metal-poor stellar populations (Z ≤ 0.02 Z ⊙), while the less massive nuclei are younger than ∼2 Gyr with metallicities in the range 0.02 < Z/Z ⊙ ≤ 1. We find that the nucleus mass ({{ \\mathcal M }}nuc}) versus galaxy mass ({{ \\mathcal M }}gal}) relation becomes shallower for less massive galaxies starting around 108 M ⊙, and the mass ratio {η }n={{ \\mathcal M }}nuc}/{{ \\mathcal M }}gal} shows a clear anticorrelation with {{ \\mathcal M }}gal} for the lowest masses, reaching 10%. We test current theoretical models of nuclear cluster formation and find that they cannot fully reproduce the observed trends. A likely mixture of in situ star formation and star cluster mergers seems to be acting during nucleus growth over cosmic time.

  20. Comparison between dispersed nuclear power plants and a nuclear energy center at a hypothetical site on Kentucky Lake, Tennessee. Vol. IV. A site selection methodology

    International Nuclear Information System (INIS)

    Rosemarin, C.S.; Yaffee, S.L.

    1976-09-01

    A methodology has been developed for selecting suitable sites for development as nuclear energy centers. First, the forty-eight contiguous states were screened on the basis of four variables: (1) seismic stability; (2) distance from projected population centers; (3) adequate water supply; and (4) noninterference with scenic and reserved lands. After location of a surrogate area in north central Tennessee, further screening was performed using 22 variables to find a suitable 75-sq-mile surrogate site within this 1500-sq-mile area. A computer method for screening the surrogate area is presented, and the use of the data for the 22 variables is illustrated

  1. IVS Organization

    Science.gov (United States)

    2004-01-01

    International VLBI Service (IVS) is an international collaboration of organizations which operate or support Very Long Baseline Interferometry (VLBI) components. The goals are: To provide a service to support geodetic, geophysical and astrometric research and operational activities. To promote research and development activities in all aspects of the geodetic and astrometric VLBI technique. To interact with the community of users of VLBI products and to integrate VLBI into a global Earth observing system.

  2. Best-practices guidelines for L2PSA development and applications. Volume 2 - Best practices for the Gen II PWR, Gen II BWR L2PSAs. Extension to Gen III reactors

    International Nuclear Information System (INIS)

    Raimond, E.; Durin, T.; Rahni, N.; Meignen, R.; Cranga, M.; Pichereau, F.; Bentaib, A.; Guigueno, Y.; Loeffler, H.; Mildenberger, O.; Lajtha, G.; Santamaria, C.S.; Dienstbier, J.; Rydl, A.; Holmberg, J.E.; Lindholm, I.; Maennistoe, I.; Pauli, E.M.; Dirksen, G.; Grindon, L.; Peers, K.; Hulqvist, G.; Parozzi, F.; Polidoro, F.; Cazzoli, E.; Vitazkova, J.; Burgazzi, L.; Oury, L.; Ngatchou, C.; Siltanen, S.; Niemela, I.; Routamo, T.; Helstroem, P.; Bassi, C.; Brinkman, H.; Seidel, A.; Schubert, B.; Wohlstein, R.; Guentay, S.; Vincon, L.

    2010-01-01

    The objective of this coordinated action was to develop best practice guidelines for the performance of Level 2 PSA methodologies with a view of harmonisation at EU level and to allow meaningful and practical uncertainty evaluations in a Level 2 PSA. Specific relationships with community in charge of nuclear reactor safety (utilities, safety authorities, vendors, and research or services companies) have been established in order to define the current needs in terms of guidelines for level 2 PSA development and applications. An international workshop was organised in Hamburg, with the support of VATTENFALL, in November 2008. The level 2 PSA experts from the ASAMPSA2 project partners have proposed some guidelines for the development and application of L2PSA based on their experience and on information available from international cooperation (EC Severe Accident network of Excellence - SARNET, IAEA standards, OECD-NEA publications and workshop) or open literature. The number of technical issues addressed in the guideline is very large and all are not covered with the same relevancy in the first version of the guideline. This version is submitted for external review in November 2010 by severe accident experts and PSA, especially, from SARNET and OECD-NEA members. The feedback of the external review will be dis cussed during an international open works hop planned in March 2011 and all outcomes will be taken into consideration in the final version of this guideline (June 2011). The guideline includes 3 volumes: - Volume 1 - General considerations on L2PSA. - Volume 2 - Technical recommendations for Gen II and III reactors. - Volume 3 - Specific considerations for future reactor (Gen IV). The recommendations formulated in the guideline should not be considered as 'mandatory' but should help the L2PSA developers to achieve high quality studies with limited time and resources. It may also help the L2PSA reviewers by positioning one specific study in comparison with some

  3. Corrosion of structural materials for Generation IV systems

    International Nuclear Information System (INIS)

    Balbaud-Celerier, F.; Cabet, C.; Courouau, J.L.; Martinelli, L.; Arnoux, P.

    2009-01-01

    The Generation IV International Forum aims at developing future generation nuclear energy systems. Six systems have been selected for further consideration: sodium-cooled fast reactor (SFR), gas-cooled fast reactor (GFR), lead-cooled fast reactor (LFR), molten salt reactor (MSR), supercritical water-cooled reactor (SCWR) and very high temperature reactor (VHTR). CEA, in the frame of a national program, of EC projects and of the GIF, contributes to the structural materials developments and research programs. Particularly, corrosion studies are being performed in the complex environments of the GEN IV systems. As a matter of fact, structural materials encounter very severe conditions regarding corrosion concerns: high temperatures and possibly aggressive chemical environments. Therefore, the multiple environments considered require also a large diversity of materials. On the other hand, the similar levels of working temperatures as well as neutron spectrum imply also similar families of materials for the various systems. In this paper, status of the research performed in CEA on the corrosion behavior of the structural material in the different environments is presented. The materials studied are either metallic materials as austenitic (or Y, La, Ce doped) and ferrito-martensitic steels, Ni base alloys, ODS steels, or ceramics and composites. In all the environments studied, the scientific approach is identical, the objective being in all cases the understanding of the corrosion processes to establish recommendations on the chemistry control of the coolant and to predict the long term behavior of the materials by the development of corrosion models. (author)

  4. Nordic forum for generation IV reactors, status and activities in 2012

    International Nuclear Information System (INIS)

    Van Nieuwenhove, R.; Lauritzen, B.; Nonboel, E.

    2012-12-01

    The Nordic-Gen4 (continuation from NOMAGE4) seminar was this year hosted by DTU Nutech at Risoe, Denmark. The seminar was well attended (49 participants from 12 countries). The presentations covered many aspects in Gen-IV reactor research and gave a good overview of the activities within this field at the various institutes and universities. The present report contains book of abstracts. The individual Power Point presentations are indexed in INIS and may be found at http://nordic-gen4.org/seminars/nordic-gen4-riso-2012-2/ (LN)

  5. Nordic forum for generation IV reactors, status and activities in 2012

    Energy Technology Data Exchange (ETDEWEB)

    Van Nieuwenhove, R. [Institutt for Energiteknikk, OECD Halden Reactor Project, Kjeller (Norway); Lauritzen, B.; Nonboel, E. [Technical Univ. of Denmark. DTU Nutech, Roskilde (Denmark)

    2012-12-15

    The Nordic-Gen4 (continuation from NOMAGE4) seminar was this year hosted by DTU Nutech at Risoe, Denmark. The seminar was well attended (49 participants from 12 countries). The presentations covered many aspects in Gen-IV reactor research and gave a good overview of the activities within this field at the various institutes and universities. The present report contains book of abstracts. The individual Power Point presentations are indexed in INIS and may be found at http://nordic-gen4.org/seminars/nordic-gen4-riso-2012-2/ (LN)

  6. The G4-ECONS Economic Evaluation Tool for Generation IV Reactor Systems and its Proposed Application to Deliberately Small Reactor Systems and Proposed New Nuclear Fuel Cycle Facilities. Annex IX

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-12-15

    At the outset of the international Generation IV programme, it was decided that the six candidate reactor systems will ultimately be evaluated on the basis of safety, sustainability, non-proliferation attributes, technical readiness and projected economics. It is likely that the same factors will influence the evaluation of deliberately small reactor systems1 and new fuel cycle facilities, such as reprocessing plants that are being considered under the more recent Global Nuclear Energy Partnership (GNEP). This annex describes how the development of an economic modelling system has evolved to address the issue of economic competitiveness for both the Generation IV and GNEP programmes. In 2004, the Generation IV Economic Modelling Working Group (EMWG) commissioned the development of a Microsoft Excel based model capable of calculating the levelized unit electricity cost (LUEC) in mills/kW.h (1 mill = $10{sup -3}) or $/MW.h for multiple types of reactor system being developed under the Generation IV programme. This overall modelling system is now called the Generation IV spreadsheet calculation of nuclear systems (G4-ECONS), and is being expanded to calculate costs of energy products in addition to electricity, such as hydrogen and desalinated water. A version has also been developed to evaluate the costs of products or services from fuel cycle facilities. The cost estimating methodology and algorithms are explained in detail in the Generation IV Cost Estimating Guidelines and in the G4-ECONS User's Manual. The model was constructed with relatively simple economic algorithms such that it could be used by almost any nation without regard to country specific taxation, cost accounting, depreciation or capital cost recovery methodologies. It was also designed with transparency to the user in mind (i.e. all algorithms and cell contents are visible to the user). A short description of version 1.0 G4-ECONS-R (reactor economics model) has also been published in the

  7. The G4-ECONS Economic Evaluation Tool for Generation IV Reactor Systems and its Proposed Application to Deliberately Small Reactor Systems and Proposed New Nuclear Fuel Cycle Facilities. Annex IX

    International Nuclear Information System (INIS)

    2013-01-01

    At the outset of the international Generation IV programme, it was decided that the six candidate reactor systems will ultimately be evaluated on the basis of safety, sustainability, non-proliferation attributes, technical readiness and projected economics. It is likely that the same factors will influence the evaluation of deliberately small reactor systems1 and new fuel cycle facilities, such as reprocessing plants that are being considered under the more recent Global Nuclear Energy Partnership (GNEP). This annex describes how the development of an economic modelling system has evolved to address the issue of economic competitiveness for both the Generation IV and GNEP programmes. In 2004, the Generation IV Economic Modelling Working Group (EMWG) commissioned the development of a Microsoft Excel based model capable of calculating the levelized unit electricity cost (LUEC) in mills/kW.h (1 mill = $10 -3 ) or $/MW.h for multiple types of reactor system being developed under the Generation IV programme. This overall modelling system is now called the Generation IV spreadsheet calculation of nuclear systems (G4-ECONS), and is being expanded to calculate costs of energy products in addition to electricity, such as hydrogen and desalinated water. A version has also been developed to evaluate the costs of products or services from fuel cycle facilities. The cost estimating methodology and algorithms are explained in detail in the Generation IV Cost Estimating Guidelines and in the G4-ECONS User's Manual. The model was constructed with relatively simple economic algorithms such that it could be used by almost any nation without regard to country specific taxation, cost accounting, depreciation or capital cost recovery methodologies. It was also designed with transparency to the user in mind (i.e. all algorithms and cell contents are visible to the user). A short description of version 1.0 G4-ECONS-R (reactor economics model) has also been published in the Proceedings of

  8. Asteroids IV

    Science.gov (United States)

    Michel, Patrick; DeMeo, Francesca E.; Bottke, William F.

    . Asteroids, like planets, are driven by a great variety of both dynamical and physical mechanisms. In fact, images sent back by space missions show a collection of small worlds whose characteristics seem designed to overthrow our preconceived notions. Given their wide range of sizes and surface compositions, it is clear that many formed in very different places and at different times within the solar nebula. These characteristics make them an exciting challenge for researchers who crave complex problems. The return of samples from these bodies may ultimately be needed to provide us with solutions. In the book Asteroids IV, the editors and authors have taken major strides in the long journey toward a much deeper understanding of our fascinating planetary ancestors. This book reviews major advances in 43 chapters that have been written and reviewed by a team of more than 200 international authorities in asteroids. It is aimed to be as comprehensive as possible while also remaining accessible to students and researchers who are interested in learning about these small but nonetheless important worlds. We hope this volume will serve as a leading reference on the topic of asteroids for the decade to come. We are deeply indebted to the many authors and referees for their tremendous efforts in helping us create Asteroids IV. We also thank the members of the Asteroids IV scientific organizing committee for helping us shape the structure and content of the book. The conference associated with the book, "Asteroids Comets Meteors 2014" held June 30-July 4, 2014, in Helsinki, Finland, did an outstanding job of demonstrating how much progress we have made in the field over the last decade. We are extremely grateful to our host Karri Muinonnen and his team. The editors are also grateful to the Asteroids IV production staff, namely Renée Dotson and her colleagues at the Lunar and Planetary Institute, for their efforts, their invaluable assistance, and their enthusiasm; they made life as

  9. Simulators IV

    International Nuclear Information System (INIS)

    Fairchild, B.T.

    1987-01-01

    These proceedings contain papers on simulators with artificial intelligence, and the human decision making process; visuals for simulators: human factors, training, and psycho-physical impacts; the role of institutional structure on simulation projects; maintenance trainers for economic value and safety; biomedical simulators for understanding nature, for medical benefits, and the physiological effects of simulators; the mathematical models and numerical techniques that drive today's simulators; and the demography of simulators, with census papers identifying the population of real-time simulator training devices; nuclear reactors

  10. Expert judgments about RD&D and the future of nuclear energy.

    Science.gov (United States)

    Anadón, Laura D; Bosetti, Valentina; Bunn, Matthew; Catenacci, Michela; Lee, Audrey

    2012-11-06

    Probabilistic estimates of the cost and performance of future nuclear energy systems under different scenarios of government research, development, and demonstration (RD&D) spending were obtained from 30 U.S. and 30 European nuclear technology experts. We used a novel elicitation approach which combined individual and group elicitation. With no change from current RD&D funding levels, experts on average expected current (Gen. III/III+) designs to be somewhat more expensive in 2030 than they were in 2010, and they expected the next generation of designs (Gen. IV) to be more expensive still as of 2030. Projected costs of proposed small modular reactors (SMRs) were similar to those of Gen. IV systems. The experts almost unanimously recommended large increases in government support for nuclear RD&D (generally 2-3 times current spending). The majority expected that such RD&D would have only a modest effect on cost, but would improve performance in other areas, such as safety, waste management, and uranium resource utilization. The U.S. and E.U. experts were in relative agreement regarding how government RD&D funds should be allocated, placing particular focus on very high temperature reactors, sodium-cooled fast reactors, fuels and materials, and fuel cycle technologies.

  11. Meeting the near-term demand for hydrogen using nuclear energy in competitive power markets

    International Nuclear Information System (INIS)

    Miller, A.I.; Duffey, R.B.

    2004-01-01

    Hydrogen is becoming the reference fuel for future transportation and the timetable for its adoption is shortening. However, to deploy its full potential, hydrogen production either directly or indirectly needs to satisfy three criteria: no associated emissions, including CO 2 ; wide availability; and affordability. This creates a window of great opportunity within the next 15 years for nuclear energy to provide the backbone of hydrogen-based energy systems. But nuclear must establish its hydrogen generating role long before the widespread deployment of Gen IV high-temperature reactors, with their possibility of producing hydrogen directly by heat rather than electricity. For Gen IV the major factors will be efficiency and economic cost, particularly if centralized storage is needed and/or credits for avoided emissions and/or oxygen sales. In the interim, despite its apparently lower overall efficiency, water electrolysis is the only available technology today able to meet the first and second criteria. The third criterion includes costs of electrolysis and electricity. The primary requirements for affordable electrolysis are low capital cost and high utilisation. Consequently, the electricity supply must enable high utilisation as well as being itself low-cost and emissions-free. Evolved Gen III+ nuclear technologies can produce electricity on large scales and at rates competitive with today's CO 2 -emitting, fossil-fuelled technologies. As an example of electrolytic hydrogen's potential, we show competitive deployment in a typical competitive power market. Among the attractions of this approach are reactors supplying a base-loaded market - though permitting occasional, opportunistic diversion of electricity during price spikes on the power grid - and easy delivery of hydrogen to widely distributed users. Gen IV systems with multiple product streams and higher efficiency (e.g., the SCWR) can also be envisaged which can use competitive energy markets to advantage

  12. FutureGen Project Report

    Energy Technology Data Exchange (ETDEWEB)

    Cabe, Jim; Elliott, Mike

    2010-09-30

    This report summarizes the comprehensive siting, permitting, engineering, design, and costing activities completed by the FutureGen Industrial Alliance, the Department of Energy, and associated supporting subcontractors to develop a first of a kind near zero emissions integrated gasification combined cycle power plant and carbon capture and storage project (IGCC-CCS). With the goal to design, build, and reliably operate the first IGCC-CCS facility, FutureGen would have been the lowest emitting pulverized coal power plant in the world, while providing a timely and relevant basis for coal combustion power plants deploying carbon capture in the future. The content of this report summarizes key findings and results of applicable project evaluations; modeling, design, and engineering assessments; cost estimate reports; and schedule and risk mitigation from initiation of the FutureGen project through final flow sheet analyses including capital and operating reports completed under DOE award DE-FE0000587. This project report necessarily builds upon previously completed siting, design, and development work executed under DOE award DE-FC26- 06NT4207 which included the siting process; environmental permitting, compliance, and mitigation under the National Environmental Policy Act; and development of conceptual and design basis documentation for the FutureGen plant. For completeness, the report includes as attachments the siting and design basis documents, as well as the source documentation for the following: • Site evaluation and selection process and environmental characterization • Underground Injection Control (UIC) Permit Application including well design and subsurface modeling • FutureGen IGCC-CCS Design Basis Document • Process evaluations and technology selection via Illinois Clean Coal Review Board Technical Report • Process flow diagrams and heat/material balance for slurry-fed gasifier configuration • Process flow diagrams and heat/material balance

  13. Localización extra nuclear de receptores esteroides y activación de mecanismos no genómicos Extra nuclear localization of steroid receptors and non genomic activation mechanisms

    Directory of Open Access Journals (Sweden)

    María Cecilia Bottino

    2010-04-01

    Full Text Available Los receptores de hormonas esteroides han sido considerados históricamente como factores de transcripción nucleares. Sin embargo, en los últimos años surgieron evidencias que indican que su activación desencadena eventos rápidos, independientes de la transcripción y que involucran a diferentes segundos mensajeros; muchos de estos receptores han sido localizados en la membrana celular. Por otra parte, se han caracterizado varios receptores de hormonas esteroides noveles, de estructura molecular diferente al receptor clásico, localizados principalmente en la membrana celular. Esta revisión enfoca los diferentes efectos iniciados por los glucocorticoides, mineralocorticoides, andrógenos, estrógenos y progesterona, y los posibles receptores involucrados en los mismos.Steroid hormone receptors have been historically considered as nuclear transcription factors. Nevertheless, in the last years, many of them have been detected in the cellular membrane. It has been postulated that their activation can induce transcription independent rapid events involving different second messengers. In addition, several novel steroid hormone receptors, showing a different molecular structure than the classical ones, have also been characterized and most of them are also located in the plasmatic membrane. This review focuses on the variety of effects initiated by glucocorticoids, mineralocorticoids, androgens, estrogens and progesterone, and the possible receptors involved mediating these effects.

  14. Algoritmos genéticos locales

    OpenAIRE

    García-Martínez, Carlos; Lozano, Manuel

    2007-01-01

    Los Algoritmos Genéticos Locales son procedimientos que iterativamente re nan soluciones dadas. Su diferencia con procedimientos de mejora iterativa clásicos reside en el uso de operadores genéticos para realizar el re namiento. En este estudio presentamos un nuevo Algoritmo Genético Local Binario basado en un Algoritmo Genético Estacionario. Hemos comparado el Algoritmo Genético Local Binario con otros procedimientos de mejora iterativa de la literatura. Los res...

  15. GenLab, Laboratorio Virtual de Genética

    Directory of Open Access Journals (Sweden)

    Fidel Ramírez

    2000-07-01

    Full Text Available GenLab es el nombre que tiene el software diseñado por nosotros, en el cual se modela el proceso meiótico y la fecundación en organismos diploides. El objetivo de esta aplicación es ilustrar el resultado de un cruce determinado, tratando de ser lo más ajustados a la realidad. La modelación de la reproducción sexual se realiza internamente y el GenLab se limita a presentar los resultados según el número de descendencia seleccionado para un cruce específico, esto significa que se puede escoger una gran cantidad de características para los parentales y se puede estudiar la frecuencia de estos en la descendencia. El modelo cuenta con base de datos donde están almacenados algunos de los locus de Drosophila melanogaster junto con su ubicación en centimorgans 1. EI propósito de este modelo es servir como herramienta pedagógica  y didáctica tanto en universidades como en colegios, facilitando el aprendizaje de algunos principios básicos de la genética, por lo cual puede ser usado si se cuenta con una conexión a Internet y un navegador visitando http://biologia.unal.edu.co/fidel.

  16. Taxonomic dissection of the genus Micrococcus: Kocuria gen. nov., Nesterenkonia gen. nov., Kytococcus gen. nov., Dermacoccus gen. nov., and Micrococcus Cohn 1872 gen. emend.

    Science.gov (United States)

    Stackebrandt, E; Koch, C; Gvozdiak, O; Schumann, P

    1995-10-01

    The results of a phylogenetic and chemotaxonomic analysis of the genus Micrococcus indicated that it is significantly heterogeneous. Except for Micrococcus lylae, no species groups phylogenetically with the type species of the genus, Micrococcus luteus. The other members of the genus form three separate phylogenetic lines which on the basis of chemotaxonomic properties can be assigned to four genera. These genera are the genus Kocuria gen. nov. for Micrococcus roseus, Micrococcus varians, and Micrococcus kristinae, described as Kocuria rosea comb. nov., Kocuria varians comb. nov., and Kocuria kristinae comb. nov., respectively; the genus Nesterenkonia gen. nov. for Micrococcus halobius, described as Nesterenkonia halobia comb. nov.; the genus Nesterenkonia gen. nov. for Micrococcus halobius, described as Nesterenkonia halobia comb. nov.; the genus Dermacoccus gen. nov. for Micrococcus nishinomiyaensis, described as Dermacoccus nishinomiyaensis comb. nov.; and the genus Kytocossus gen. nov. for Micrococcus sedentarius, described as Kytococcus sedentarius comb. nov. M. luteus and M. lylae, which are closely related phylogenetically but differ in some chemotaxonomic properties, are the only species that remain in the genus Micrococcus Cohn 1872. An emended description of the genus Micrococcus is given [corrected].

  17. COBRA-IV-I: an interim version of COBRA for thermal-hydraulic analysis of rod bundle nuclear fuel elements and cores

    Energy Technology Data Exchange (ETDEWEB)

    Wheeler, C.L.; Stewart, C.W.; Cena, R.J.; Rowe, D.S.; Sutey, A.M.

    1976-03-01

    The COBRA-IV-I computer code uses the subchannel analysis approach to determine the enthalpy and flow distribution in rod bundles for both steady-state and transient conditions. The steady-state and transient solution schemes used in COBRA-IIIC are still available in COBRA-IV-I as the implicit solution scheme option. In addition to these techniques, a new explicit solution scheme is now available which allows the calculation of severe transients involving flow reversals, recirculations, expulsion and reentry flows, with a pressure or flow boundary condition specified. Significant storage compaction and reduced running times have been achieved to allow the calculation of problems involving hundreds of subchannels.

  18. Coordination Nature of 4-Mercaptoaniline to Sn(II Ion: Formation of a One Dimensional Coordination Polymer and Its Decomposition to a Mono Nuclear Sn(IV Complex

    Directory of Open Access Journals (Sweden)

    Eon S. Burkett

    2014-12-01

    Full Text Available The coordination of the bifunctional ligand 4-mercaptoaniline with aqueo us tin(II metal ion was studied. A coordination polymer was synthesized when an aqueous solution of SnCl2 was treated with 4-MA. The crystalline material is stable under atmospheric conditions retaining its oxidation state. However, when submerged in a solution saturated with oxygen, the compound oxidizes to a mononuclear tin(IV complex. Both the compounds were characterized by single crystal X-ray diffraction studies. Although the structure of the tin(IV complex was previously reported, crystal structure of this compound was redetermined.

  19. Fundamental Technology Development for Radiation Damage in Nuclear Materials

    International Nuclear Information System (INIS)

    Kwon, Sang Chul; Kwon, J. H.; Kim, E. S. and others

    2005-04-01

    This project was performed to achieve technologies for the evaluation of radiation effects at materials irradiated at HANARO and nuclear power plants, to establish measurement equipment and software for the analysis of radiation defects and to set up facilities for the measurements of radiation damage with non-destructive methods. Major targets were 1) establishment of hot laboratories and remote handling facilities/ technologies for the radioactive material tests, 2) irradiation test for the simulation of nuclear power plant environment and measurement/calculation of physical radiation damage, 3) evaluation and analysis of nano-scale radiation damage, 4) evaluation of radiation embrittlement with ultrasonic resonance spectrum measurement and electromagnetic measurement and 5) basic research of radiation embrittlement and radiation damage mechanism. Through the performance of 3 years, preliminary basics were established for the application research to evaluation of irradiated materials of present nuclear power plants and GEN-IV systems. Particularly the results of SANS, PAS and TEM analyses were the first output in Korea. And computer simulations of radiation damage were tried for the first time in Korea. The technologies will be developed for the design of GEN-IV material

  20. NUCLEAR ENERGY RESEARCH INITIATIVE (NERI) PROGRAM GRANT NUMBER DE-FG03-00SF22168 TECHNICAL PROGRESS REPORT (Aug 15, 2002 to Nov. 15, 2002) - DESIGN AND LAYOUT CONCEPTS FOR COMPACT, FACTORY-PRODUCED, TRANSPORTABLE GENERATION IV REACTOR SYSTEMS

    International Nuclear Information System (INIS)

    Fred R. Mynatt; Andy Kadak; Marc Berte; Larry Miller; Lawrence Townsend; Martin Williamson; Rupy Sawhney; Jacob Fife

    2002-01-01

    The objectives of this project are to develop and evaluate nuclear power plant designs and layout concepts to maximize the benefits of compact modular Generation IV reactor concepts including factory fabrication and packaging for optimal transportation and siting. This report covers the ninth quarter of the project. The three reactor concept teams have completed initial plant concept development, evaluation and layout. A significant design effort has proceeded with substantial change and evolution from original ideas. The concepts have been reviewed by the industry participants and improvements have been implemented. The third phase, industrial engineering simulation of reactor fabrication has begun

  1. Data formats and procedures for the evaluated nuclear data format. ENDF-IV. Reprint of the report BNL-NCS-50496 (ENDF-102), revised

    Energy Technology Data Exchange (ETDEWEB)

    Garber, D; Dunford, C; Pearlstein, S

    1984-05-01

    These revisions to Data Formats and Procedures for the ENDF Neutron Cross Section Library, ENDF-102, pertain to the latest version of ENDF/B-IV.The descriptions of the formats have been brought up to date and important procedural matters have been explained. Three new appendices have been added

  2. Data formats and procedures for the evaluated nuclear data format. ENDF-IV. Reprint of the report BNL-NCS-50496 (ENDF-102), revised

    International Nuclear Information System (INIS)

    Garber, D.; Dunford, C.; Pearlstein, S.

    1984-01-01

    These revisions to Data Formats and Procedures for the ENDF Neutron Cross Section Library, ENDF-102, pertain to the latest version of ENDF/B-IV.The descriptions of the formats have been brought up to date and important procedural matters have been explained. Three new appendices have been added

  3. Radiation and physical protection challenges at advanced nuclear fuel cycle facilities

    International Nuclear Information System (INIS)

    Pickett, Susan E.

    2008-01-01

    Full text: The purpose of this study is to examine challenges and opportunities for radiation protection in advanced nuclear reactors and fuel facilities proposed under the Generation IV (GEN IV) initiative which is examining and pursuing the exploration and development of advanced nuclear science and technology; and the Global Nuclear Energy Partnership (GNEP), which seeks to develop worldwide consensus on enabling expanded use of economical, carbon-free nuclear energy to meet growing energy demand. The International Energy Agency projects nuclear power to increase at a rate of 1.3 to 1.5 percent a year over the next 20 years, depending on economic growth. Much of this growth will be in Asia, which, as a whole, currently has plans for 40 new nuclear power plants. Given this increase in demand for new nuclear power facilities, ranging from light water reactors to advanced fuel processing and fabrication facilities, it is necessary for radiation protection and physical protection technologies to keep pace to ensure both worker and public health. This paper is based on a review of current initiatives and the proposed reactors and facilities, primarily the nuclear fuel cycle facilities proposed under the GEN IV and GNEP initiatives. Drawing on the Technology Road map developed under GEN IV, this work examines the potential radiation detection and protection challenges and issues at advanced reactors, including thermal neutron spectrum systems, fast neutron spectrum systems and nuclear fuel recycle facilities. The thermal neutron systems look to improve the efficiency of production of hydrogen or electricity, while the fast neutron systems aim to enable more effective management of actinides through recycling of most components in the discharged fuel. While there are components of these advanced systems that can draw on the current and well-developed radiation protection practices, there will inevitably be opportunities to improve the overall quality of radiation

  4. Identificación de biotipos de Spodoptera frugiperda (Lepidoptera: Noctuidae) en los departamentos de Córdoba, Meta, Tolima y Valle del Cauca mediante el gen mitocondrial Citocromo Oxidasa I (COI) y la región nuclear FR

    OpenAIRE

    Cano Calle, Daniela

    2015-01-01

    Resumen: Spodoptera frugiperda (J. E. Smith, 1797) es un insecto plaga del maíz, arroz, algodón, sorgo y pastizales. Presenta dos formas biológicas (biotipos o razas) (maíz y arroz) que son idénticas morfológicamente, pero que difieren en varios aspectos tales como su composición genética, su aislamiento reproductivo y su tolerancia a insecticidas y controladores biológicos. En este trabajo se realizó la identificación molecular de estos biotipos a partir de larvas recolectadas en cultivos de...

  5. Diversidade genÃtica da abelha sem ferrÃo melipona quinquefasciata baseada no sequÃnciamento das regiÃes its1 e 18s do dna ribossÃmico nuclear

    OpenAIRE

    JÃlio OtÃvio Portela Pereira

    2006-01-01

    A pesquisa foi desenvolvida no perÃodo de janeiro de 2003 a marÃo de 2006, nos Departamentos de Zootecnia, e Biologia da Universidade Federal do CearÃ, localizada no municÃpio de Fortaleza, estado do CearÃ. As amostras de abelhas foram coletadas nos estados do CearÃ, Piauà e GoiÃs. O objetivo desta tese foi estudar a diversidade genÃtica de populaÃÃes da abelha sem ferrÃo Melipona quinquefasciata, ocorrendo naturalmente na Chapada do Araripe (Sul do CearÃ), na Chapada da Ibiapaba (Oeste do Ce...

  6. 1L Mark-IV Target Design Review

    Energy Technology Data Exchange (ETDEWEB)

    Koehler, Paul E. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-11-16

    This presentation includes General Design Considerations; Current (Mark-III) Lower Tier; Mark-III Upper Tier; Performance Metrics; General Improvements for Material Science; General Improvements for Nuclear Science; Improving FOM for Nuclear Science; General Design Considerations Summary; Design Optimization Studies; Expected Mark-IV Performance: Material Science; Expected Mark-IV Performance: Nuclear Science (Disk); Mark IV Enables Much Wider Range of Nuclear-Science FOM Gains than Mark III; Mark-IV Performance Summary; Rod or Disk? Center or Real FOV?; and Project Cost and Schedule.

  7. Generation IV Reactors Integrated Materials Technology Program Plan: Focus on Very High Temperature Reactor Materials

    Energy Technology Data Exchange (ETDEWEB)

    Corwin, William R [ORNL; Burchell, Timothy D [ORNL; Katoh, Yutai [ORNL; McGreevy, Timothy E [ORNL; Nanstad, Randy K [ORNL; Ren, Weiju [ORNL; Snead, Lance Lewis [ORNL; Wilson, Dane F [ORNL

    2008-08-01

    Since 2002, the Department of Energy's (DOE's) Generation IV Nuclear Energy Systems (Gen IV) Program has addressed the research and development (R&D) necessary to support next-generation nuclear energy systems. The six most promising systems identified for next-generation nuclear energy are described within this roadmap. Two employ a thermal neutron spectrum with coolants and temperatures that enable hydrogen or electricity production with high efficiency (the Supercritical Water Reactor-SCWR and the Very High Temperature Reactor-VHTR). Three employ a fast neutron spectrum to enable more effective management of actinides through recycling of most components in the discharged fuel (the Gas-cooled Fast Reactor-GFR, the Lead-cooled Fast Reactor-LFR, and the Sodium-cooled Fast Reactor-SFR). The Molten Salt Reactor (MSR) employs a circulating liquid fuel mixture that offers considerable flexibility for recycling actinides and may provide an alternative to accelerator-driven systems. At the inception of DOE's Gen IV program, it was decided to significantly pursue five of the six concepts identified in the Gen IV roadmap to determine which of them was most appropriate to meet the needs of future U.S. nuclear power generation. In particular, evaluation of the highly efficient thermal SCWR and VHTR reactors was initiated primarily for energy production, and evaluation of the three fast reactor concepts, SFR, LFR, and GFR, was begun to assess viability for both energy production and their potential contribution to closing the fuel cycle. Within the Gen IV Program itself, only the VHTR class of reactors was selected for continued development. Hence, this document will address the multiple activities under the Gen IV program that contribute to the development of the VHTR. A few major technologies have been recognized by DOE as necessary to enable the deployment of the next generation of advanced nuclear reactors, including the development and qualification of

  8. Development of methods for measuring materials nuclear characteristics, Phases, I, II, II and IV; Razvijanje metoda merenja nuklearnih karakteristika materijala, I, II, II i VI faza

    Energy Technology Data Exchange (ETDEWEB)

    Maglic, R [Boris Kidric Institute of Nuclear Sciences Vinca, Belgrade (Yugoslavia)

    1963-04-15

    This report contains the following phases of the project 'measurement of nuclear characteristics of reactor materials': nuclear performances of the neutron chopper; method for measuring total effective cross sections by transmission method on the chopper; review of methods for measuring activation cross sections; measurement of neutron spectra of the RA reactor and measurement of total effective cross section of gold by using the chopper.

  9. Thermal fluid dynamics study of nuclear advanced reactors of high temperature using RELAP5-3D; Estudo termofluidodinâmico de reatores nucleares avançados de alta temperatura utilizando o RELAP5-3D

    Energy Technology Data Exchange (ETDEWEB)

    Scari, Maria Elizabeth

    2017-07-01

    Fourth Generation nuclear reactors (GEN-IV) are being designed with special features such as intrinsic safety, reduction of isotopic inventory and use of fuel in proliferation-resistant cycles. Therefore, the investigation and evaluation of operational and safety aspects of the GEN-IV reactors have been the subject of numerous studies by the international community and also in Brazil. In 2008, in Brazil, was created the National Institute of Science and Technology of Innovative Nuclear Reactors, focusing on studies of projects and systems of new generation reactors, which included GEN-IV reactors as well as advanced PWR (Pressurized Water Reactor) concepts. The Department of Nuclear Engineering of the Federal University of Minas Gerais (DEN-UFMG) is a partner of this Institute, having started studies on the GEN-IV reactors in the year 2007. Therefore, in order to add knowledge to these studies, in this work, three projects of advanced reactors were considered to verify the simulation capability of the thermo-hydraulic RELAP5-3D code for these systems, either in stationary operation or in transient situations. The addition of new working fluids such as ammonia, carbon dioxide, helium, hydrogen, various types of liquid salts, among them Flibe, lead, lithium-bismuth, lithium-lead, was a major breakthrough in this version of the code, allowing also the simulation of GEN-IV reactors. The modeling of the respective core of an HTTR (High Temperature Engineering Test Reactor), HTR-10 (High Temperature Test Module Reactor) and LS-VHTR (Liquid-Salt-Cooled Very-High-Temperature Reactor) were developed and verified in steady state comparing the values found through the calculations with reference data from other simulations, when it is possible. The first two reactors use helium gas as coolant and the LS-VHTR uses a mixture of 66% LiF and 34% of BeF{sub 2}, the LiF-BeF{sub 2}, also know as Flibe. All the studied reactors use enriched uranium as fuel, in form of TRISO

  10. From AWE-GEN to AWE-GEN-2d: a high spatial and temporal resolution weather generator

    Science.gov (United States)

    Peleg, Nadav; Fatichi, Simone; Paschalis, Athanasios; Molnar, Peter; Burlando, Paolo

    2016-04-01

    A new weather generator, AWE-GEN-2d (Advanced WEather GENerator for 2-Dimension grid) is developed following the philosophy of combining physical and stochastic approaches to simulate meteorological variables at high spatial and temporal resolution (e.g. 2 km x 2 km and 5 min for precipitation and cloud cover and 100 m x 100 m and 1 h for other variables variable (temperature, solar radiation, vapor pressure, atmospheric pressure and near-surface wind). The model is suitable to investigate the impacts of climate variability, temporal and spatial resolutions of forcing on hydrological, ecological, agricultural and geomorphological impacts studies. Using appropriate parameterization the model can be used in the context of climate change. Here we present the model technical structure of AWE-GEN-2d, which is a substantial evolution of four preceding models (i) the hourly-point scale Advanced WEather GENerator (AWE-GEN) presented by Fatichi et al. (2011, Adv. Water Resour.) (ii) the Space-Time Realizations of Areal Precipitation (STREAP) model introduced by Paschalis et al. (2013, Water Resour. Res.), (iii) the High-Resolution Synoptically conditioned Weather Generator developed by Peleg and Morin (2014, Water Resour. Res.), and (iv) the Wind-field Interpolation by Non Divergent Schemes presented by Burlando et al. (2007, Boundary-Layer Meteorol.). The AWE-GEN-2d is relatively parsimonious in terms of computational demand and allows generating many stochastic realizations of current and projected climates in an efficient way. An example of model application and testing is presented with reference to a case study in the Wallis region, a complex orography terrain in the Swiss Alps.

  11. Nuclear fuel deformation phenomena

    International Nuclear Information System (INIS)

    Van Brutzel, L.; Dingreville, R.; Bartel, T.J.

    2015-01-01

    Nuclear fuel encounters severe thermomechanical environments. Its mechanical response is profoundly influenced by an underlying heterogeneous microstructure but also inherently dependent on the temperature and stress level histories. The ability to adequately simulate the response of such microstructures, to elucidate the associated macroscopic response in such extreme environments is crucial for predicting both performance and transient fuel mechanical responses. This chapter discusses key physical phenomena and the status of current modelling techniques to evaluate and predict fuel deformations: creep, swelling, cracking and pellet-clad interaction. This chapter only deals with nuclear fuel; deformations of cladding materials are discussed elsewhere. An obvious need for a multi-physics and multi-scale approach to develop a fundamental understanding of properties of complex nuclear fuel materials is presented. The development of such advanced multi-scale mechanistic frameworks should include either an explicit (domain decomposition, homogenisation, etc.) or implicit (scaling laws, hand-shaking,...) linkage between the different time and length scales involved, in order to accurately predict the fuel thermomechanical response for a wide range of operating conditions and fuel types (including Gen-IV and TRU). (authors)

  12. Thermal fluid dynamics study of nuclear advanced reactors of high temperature using RELAP5-3D

    International Nuclear Information System (INIS)

    Scari, Maria Elizabeth

    2017-01-01

    Fourth Generation nuclear reactors (GEN-IV) are being designed with special features such as intrinsic safety, reduction of isotopic inventory and use of fuel in proliferation-resistant cycles. Therefore, the investigation and evaluation of operational and safety aspects of the GEN-IV reactors have been the subject of numerous studies by the international community and also in Brazil. In 2008, in Brazil, was created the National Institute of Science and Technology of Innovative Nuclear Reactors, focusing on studies of projects and systems of new generation reactors, which included GEN-IV reactors as well as advanced PWR (Pressurized Water Reactor) concepts. The Department of Nuclear Engineering of the Federal University of Minas Gerais (DEN-UFMG) is a partner of this Institute, having started studies on the GEN-IV reactors in the year 2007. Therefore, in order to add knowledge to these studies, in this work, three projects of advanced reactors were considered to verify the simulation capability of the thermo-hydraulic RELAP5-3D code for these systems, either in stationary operation or in transient situations. The addition of new working fluids such as ammonia, carbon dioxide, helium, hydrogen, various types of liquid salts, among them Flibe, lead, lithium-bismuth, lithium-lead, was a major breakthrough in this version of the code, allowing also the simulation of GEN-IV reactors. The modeling of the respective core of an HTTR (High Temperature Engineering Test Reactor), HTR-10 (High Temperature Test Module Reactor) and LS-VHTR (Liquid-Salt-Cooled Very-High-Temperature Reactor) were developed and verified in steady state comparing the values found through the calculations with reference data from other simulations, when it is possible. The first two reactors use helium gas as coolant and the LS-VHTR uses a mixture of 66% LiF and 34% of BeF 2 , the LiF-BeF 2 , also know as Flibe. All the studied reactors use enriched uranium as fuel, in form of TRISO (Tristructural

  13. In vitro quantitative ((1))H and ((19))F nuclear magnetic resonance spectroscopy and imaging studies of fluvastatin™ in Lescol® XL tablets in a USP-IV dissolution cell.

    Science.gov (United States)

    Zhang, Qilei; Gladden, Lynn; Avalle, Paolo; Mantle, Michael

    2011-12-20

    Swellable polymeric matrices are key systems in the controlled drug release area. Currently, the vast majority of research is still focused on polymer swelling dynamics. This study represents the first quantitative multi-nuclear (((1))H and ((19))F) fast magnetic resonance imaging study of the complete dissolution process of a commercial (Lescol® XL) tablet, whose formulation is based on the hydroxypropyl methylcellulose (HPMC) polymer under in vitro conditions in a standard USP-IV (United States Pharmacopeia apparatus IV) flow-through cell that is incorporated into high field superconducting magnetic resonance spectrometer. Quantitative RARE ((1))H magnetic resonance imaging (MRI) and ((19))F nuclear magnetic resonance (NMR) spectroscopy and imaging methods have been used to give information on: (i) dissolution media uptake and hydrodynamics; (ii) active pharmaceutical ingredient (API) mobilisation and dissolution; (iii) matrix swelling and dissolution and (iv) media activity within the swelling matrix. In order to better reflect the in vivo conditions, the bio-relevant media Simulated Gastric Fluid (SGF) and Fasted State Simulated Intestinal Fluid (FaSSIF) were used. A newly developed quantitative ultra-fast MRI technique was applied and the results clearly show the transport dynamics of media penetration and hydrodynamics along with the polymer swelling processes. The drug dissolution and mobility inside the gel matrix was characterised, in parallel to the ((1))H measurements, by ((19))F NMR spectroscopy and MRI, and the drug release profile in the bulk solution was recorded offline by UV spectrometer. We found that NMR spectroscopy and 1D-MRI can be uniquely used to monitor the drug dissolution/mobilisation process within the gel layer, and the results from ((19))F NMR spectra indicate that in the gel layer, the physical mobility of the drug changes from "dissolved immobilised drug" to "dissolved mobilised drug". Copyright © 2011 Elsevier B.V. All rights

  14. Validation of iron nuclear data for the neutron calculation of nuclear reactors

    International Nuclear Information System (INIS)

    Vaglio-Gaudard, C.

    2010-01-01

    The GEN-III and GEN-IV reactors will be equipped with heavy reflectors. However, the existing integral validation of the iron nuclear data in the latest JEFF3 European library in the frame of the neutron calculation of the heavy reflector is very partial: some results exist concerning fast reactors but there is no result corresponding to the LWR heavy reflector. No clear trend on the JEFF3 iron cross sections was brought into evidence up to now for fission reactor calculations. Iron nuclear data were completely re-evaluated in the JEFF3 library. Despite the fact that iron is widely used in the nuclear industry, large uncertainties are still associated with its nuclear data, particularly its inelastic cross section which is very important in the neutron slowing down. A validation of 56 Fe nuclear data was performed on the basis of the analysis of integral experiments. Two major critical experiments, the PERLE experiment and the Gas Benchmark, were interpreted with 3D reference Monte-Carlo calculations and the JEFF3.1.1 library. The PERLE experiment was recently performed in the EOLE zero-power facility (CEA Cadarache). This experiment is dedicated to heavy reflector physics in GEN-III light water reactors. It was especially conceived for the validation of iron nuclear data. The Gas Benchmark is representative of a Gas Fast Reactor with a stainless steel reflector (with no fertile blanket) in the MASURCA facility (CEA Cadarache). Radial traverses of reaction rates were measured to characterize flux attenuation at various energies in the reflector. The results of the analysis of both experiments show good agreement between the calculations and the measurements, which is confirmed by the analysis of complementary experiments (ZR-6M, MISTRAL4, CIRANO-ZONA2B). A process of re-estimating the 56 Fe nuclear data was implemented on the basis of feedback from these two experiments and the RDN code. This code relies on a non-linear regression method using an iterative

  15. Generation IV Nuclear Energy Systems Construction Cost Reductions through the Use of Virtual Environments - Task 4 Report: Virtual Mockup Maintenance Task Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Timothy Shaw; Anthony Baratta; Vaughn Whisker

    2005-02-28

    Task 4 report of 3 year DOE NERI-sponsored effort evaluating immersive virtual reality (CAVE) technology for design review, construction planning, and maintenance planning and training for next generation nuclear power plants. Program covers development of full-scale virtual mockups generated from 3D CAD data presented in a CAVE visualization facility. This report focuses on using Full-scale virtual mockups for nuclear power plant training applications.

  16. Generation IV Nuclear Energy Systems Construction Cost Reductions through the Use of Virtual Environments - Task 4 Report: Virtual Mockup Maintenance Task Evaluation

    International Nuclear Information System (INIS)

    Timothy Shaw; Anthony Baratta; Vaughn Whisker

    2005-01-01

    Task 4 report of 3 year DOE NERI-sponsored effort evaluating immersive virtual reality (CAVE) technology for design review, construction planning, and maintenance planning and training for next generation nuclear power plants. Program covers development of full-scale virtual mockups generated from 3D CAD data presented in a CAVE visualization facility. This report focuses on using Full-scale virtual mockups for nuclear power plant training applications

  17. A study on intensifying efficiency for international collaborative development of advanced nuclear energy technology

    Energy Technology Data Exchange (ETDEWEB)

    Lee, J. H.; Hahn, D. H.; Song, K. C.; Chang, J. H.; Kim, H. J.; Kim, H. J.; Lim, C. Y.; Lee, D. S.; Lee, Y. J. [KAERI, Daejeon (Korea, Republic of)

    2011-03-15

    The objective of the study was to participate the GIF for the efficient propulsion of future nuclear system development. For achieving the objective of this study, the followings were carried out. {Omicron} Analyze the international/domestic trends in the future nuclear energy system {Omicron} Analyze the domestic long-term R and D program for the future nuclear system and assist its implementation - Review the agenda of the executive committee, the technical committee, and sub-technical committee - Assist the committee meetings and workshops related to the future nuclear energy system {Omicron} Develop the participation strategy for the collaborative development of Gen-IV technology and conducting the international cooperation activities - Support the delegation by reviewing the agenda of GIF meetings in the technical and legal perspective - Research the system R and D arrangement and report its progress - Participate in the SFR SIA PA negotiation meeting and report its progress {Omicron} Support the activities related to I-NERI between Korea and U.S. - Support a delegation by reviewing the agenda in the technical/legal point of view - Participate in the BINERIC meetings and Support the related activities The result of this study may be used for 1) contribution to establishing the effective foundation and broadening the cooperation activities between the advanced countries and Korea and 2) contribution effective management of Gen IV international collaboration by technical/legal supporting

  18. A study on intensifying efficiency for international collaborative development of advanced nuclear energy technology

    International Nuclear Information System (INIS)

    Lee, J. H.; Hahn, D. H.; Song, K. C.; Chang, J. H.; Kim, H. J.; Kim, H. J.; Lim, C. Y.; Lee, D. S.; Lee, Y. J.

    2011-03-01

    The objective of the study was to participate the GIF for the efficient propulsion of future nuclear system development. For achieving the objective of this study, the followings were carried out. Ο Analyze the international/domestic trends in the future nuclear energy system Ο Analyze the domestic long-term R and D program for the future nuclear system and assist its implementation - Review the agenda of the executive committee, the technical committee, and sub-technical committee - Assist the committee meetings and workshops related to the future nuclear energy system Ο Develop the participation strategy for the collaborative development of Gen-IV technology and conducting the international cooperation activities - Support the delegation by reviewing the agenda of GIF meetings in the technical and legal perspective - Research the system R and D arrangement and report its progress - Participate in the SFR SIA PA negotiation meeting and report its progress Ο Support the activities related to I-NERI between Korea and U.S. - Support a delegation by reviewing the agenda in the technical/legal point of view - Participate in the BINERIC meetings and Support the related activities The result of this study may be used for 1) contribution to establishing the effective foundation and broadening the cooperation activities between the advanced countries and Korea and 2) contribution effective management of Gen IV international collaboration by technical/legal supporting

  19. Algoritmos genéticos

    Directory of Open Access Journals (Sweden)

    José Jesús Martínez Páez

    1998-10-01

    Full Text Available Esta técnica se basa en el concepto de evolución a través de selección de los mejores individuos, y de los operadores genéticos de selección, reproducción y mutación. Se trata entonces, de definir un espacio de soluciones para el problema que se quiere solucionar, en una cadena de bits. A esto se le conoce como la codificación del cromosoma, donde cada bit, denominado gen  tiene cierto significado especial. Inicialmente el algoritmo genera al azar muchas de estas cadenas o seres, es decir, una población, que luego confronta can un ambiente, que es el problema solucionar o función que se quiere optimizar. De esta confrontación  o evaluación a que se somete cada ser. Se obtiene información sobre cómo se comporto cada uno. A través de métodos aleatorios, pero con probabilidad de selección proporcional a su comportamiento, es decir, a mejor comportamiento mayor probabilidad, se selecciona una nueva población de seres supuestamente mejores que la generación anterior.

  20. Study of molybdenum (VI) complexation and precipitation by zirconium (IV) in strongly acid medium. Application to nuclear spent fuel dissolution; Etude de la complexation et de la precipitation du molybdene (VI) par le zirconium (IV) en milieu tres acide. Application a la dissolution du combustible nucleaire irradie

    Energy Technology Data Exchange (ETDEWEB)

    Esbelin, E

    1999-07-01

    These last years the formation of solid deposits has been observed in the dissolution workshops of the La Hague plant. A sample of the solid was withdrawn for expertise: molybdenum and zirconium are the two major components of the solid, identified as zirconium molybdate. This thesis consisted in the approach of the mechanisms in solution liable to induce precipitate formation. After a bibliographical overview on the chemistry of Mo(VI) in highly acidic solution, this system was studied by absorption spectrophotometry in perchloric medium. The implication of two major forms of Mo(VI) in a dimerization equilibrium was confirmed by this way and by {sup 95}Mo NMR. The principal parameters governing this equilibrium were identified. It is thus shown that the molybdenum dimerization reaction is exothermic. Disturbance of the Mo(VI) system in highly acidic solution by Zr(IV) was also studied. In a restricted experimental field, for which 'conventional' exploitation methodologies had to be adapted to the system, a main complex of stoichiometry 1:1 between Mo(VI) and Zr(IV) was found. The precipitation study of Mo(VI) by Zr(IV) under conditions close to those of the dissolution medium of nuclear spent fuel was undertaken. The main parameters which control precipitation kinetics were identified. The results obtained reveal that precipitation is controlled by a single macroscopic process and therefore can be described by a single equation. The solid obtained is composed of only one phase presenting a Mo:Zr non-stoichiometry when compared to the theoretical formula ZrMo{sub 2}O{sub 7}(OH){sub 2},2H{sub 2}O. At last, on the basis of the research results, a descriptive mechanism of the system is proposed in which intervenes a 1:1 intermediate complex, much more soluble than a probable 2:1 precipitation precursor. (author)

  1. IV treatment at home

    Science.gov (United States)

    ... Other IV treatments you may receive after you leave the hospital include: Treatment for hormone deficiencies Medicines for severe nausea that cancer chemotherapy or pregnancy may cause Patient-controlled analgesia (PCA) for pain (this is IV ...

  2. Genève Reconnaissante

    CERN Multimedia

    2001-01-01

    Robert Cailliau (centre), with Geneva's Mayor Alain Vaissade (left) and Jean Erhardt, Secretary General of the Administrative Council of Geneva (right). Geneva recognised the contribution of two CERN people to the reputation of the city last Tuesday when Mayor Alain Vaissade presented the Genève Reconaissante Medal to Tim Berners-Lee and Robert Cailliau. Berners-Lee, who was not able to be present in person, invented the World Wide Web at CERN just over a decade ago, while Cailliau was his first collaborator. Quoting Cailliau, Vaissade said that whilst there is no doubt that something like the Web would have appeared sooner or later, the fact that it happened at CERN, in Geneva, was no accident. Both the Laboratory and the city are places where people from around the world meet and work in harmony.

  3. Assessment of Proliferation Resistance of Closed Nuclear Fuel Cycle System with Sodium Cooled Fast Reactors Using INPRO Evaluation Methodology

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young In; Hahn, Do Hee; Won, Byung Chool; Lee, Dong Uk

    2007-11-15

    Using the INPRO methodology, the proliferation resistance of an innovative nuclear energy system(INS) defined as a closed nuclear fuel cycle system consisting of KALIMER and pyroprocessing, has been assessed. Considering a very early development stage of the INS concept, the PR assessment is carried out based on intrinsic features, if required information and data are not available. The PR assessment of KALIMER and JSFR using the INPRO methodology affirmed that an adequate proliferation resistance has been achieved in both INSs CNFC-SFR, considering the assessor's progress and maturity of design development. KALIMER and JSFR are developed or being developed conforming to the targets and criteria defined for developing Gen IV nuclear reactor system. Based on these assessment results, proliferation resistance and physical protection(PR and PP) of KALIMER and JSFR are evaluated from the viewpoint of requirements for future nuclear fuel cycle system. The envisioned INSs CNFC-SFR rely on active plutonium management based on a closed fuel cycle, in which a fissile material is recycled in an integrated fuel cycle facility within proper safeguards. There is no isolated plutonium in the closed fuel cycle. The material remains continuously in a sequence of highly radioactive matrices within inaccessible facilities. The proliferation resistance assessment should be an ongoing analysis that keeps up with the progress and maturity of the design of Gen IV SFR.

  4. Assessment of Proliferation Resistance of Closed Nuclear Fuel Cycle System with Sodium Cooled Fast Reactors Using INPRO Evaluation Methodology

    International Nuclear Information System (INIS)

    Kim, Young In; Hahn, Do Hee; Won, Byung Chool; Lee, Dong Uk

    2007-11-01

    Using the INPRO methodology, the proliferation resistance of an innovative nuclear energy system(INS) defined as a closed nuclear fuel cycle system consisting of KALIMER and pyroprocessing, has been assessed. Considering a very early development stage of the INS concept, the PR assessment is carried out based on intrinsic features, if required information and data are not available. The PR assessment of KALIMER and JSFR using the INPRO methodology affirmed that an adequate proliferation resistance has been achieved in both INSs CNFC-SFR, considering the assessor's progress and maturity of design development. KALIMER and JSFR are developed or being developed conforming to the targets and criteria defined for developing Gen IV nuclear reactor system. Based on these assessment results, proliferation resistance and physical protection(PR and PP) of KALIMER and JSFR are evaluated from the viewpoint of requirements for future nuclear fuel cycle system. The envisioned INSs CNFC-SFR rely on active plutonium management based on a closed fuel cycle, in which a fissile material is recycled in an integrated fuel cycle facility within proper safeguards. There is no isolated plutonium in the closed fuel cycle. The material remains continuously in a sequence of highly radioactive matrices within inaccessible facilities. The proliferation resistance assessment should be an ongoing analysis that keeps up with the progress and maturity of the design of Gen IV SFR

  5. Measurement of the neutron capture cross section of U234 in n-TOF at CERN for Generation IV nuclear reactors

    International Nuclear Information System (INIS)

    Dridi, W.

    2006-11-01

    Accurate and reliable neutron capture cross sections are needed in many research areas, including stellar nucleosynthesis, advanced nuclear fuel cycles, waste transmutation, and other applied programs. In particular, the accurate knowledge of U 234 (n,γ) reaction cross section is required for the design and realization of nuclear power plants based on the thorium fuel cycle. We have measured the neutron capture cross section of U 234 , with a 4π BaF 2 Total Absorption Calorimeter, at the recently constructed neutron time-of-flight facility n-TOF at CERN in the energy range from 0.03 eV to 1 MeV. Monte-Carlo simulations with GEANT4 and MCNPX of the detector response have been performed. After the background subtraction and correction with dead time and pile-up, the capture yield from 0.03 eV up to 1.5 keV was derived. The analysis of the capture yield in terms of R-matrix resonance parameters is discussed. We have identified 123 resonances and measured the resonance parameters in the energy range from 0.03 eV to 1.5 keV. The mean radiative width γ > is found to be (38.2 ± 1.5) meV and the mean spacing parameter 0 > is (11.0 ± 0.2) eV, both values agree well with recommended values

  6. Assimetria cerebral e lateralização da linguagem: déficits nucleares na esquizofrenia como indicadores da predisposição genética Asimetría cerebral y lateralización del lenguaje: déficits nucleares en la esquizofrenia como indicadores de predisposición genética Cerebral asymmetry and the lateralization of language: core deficits in schizophrenia as pointers to the genetic predisposition

    Directory of Open Access Journals (Sweden)

    Timothy J. Crow

    2004-08-01

    Full Text Available OBJETIVO: Assimetria cerebral (o torque do frontal direito em relação ao occipital esquerdo é a característica definidora do cérebro humano e, conforme proposto por Broca, o correlato neural putativo da linguagem. Se, conforme sugerido, a esquizofrenia é o preço que Homo sapiens precisa pagar pela linguagem, o torque, juntamente com seus correlatos funcionais, é de fundamental importância. São revisadas recentes evidências obtidas a partir de estudos anatômicos, funcionais e genéticos. ACHADOS RECENTES: Estudos de imagem, post mortem e anatômicos demonstram evidências de uma redução ou reversão de aspectos de assimetria, particularmente no córtex de associação occipitotemporoparietal. Em alguns estudos, há interação com o sexo. Há evidências de que uma alteração no lobo temporal esquerdo é, às vezes, progressiva. Estudos funcionais acrescentam credibilidade ao conceito de que a lateralização da linguagem é reduzida e, em alguns casos, revertida. RESUMO: A dimensão da assimetria se destaca como a variável que pode dar significância às observações entre campos de investigação e que proporciona uma solução para a base genética da psicose. Estudos de gêmeos monozigóticos discordantes têm apresentado fortes indicações de que a variação relevante é epigenética; isso é consistente com a possibilidade de que a variação seja relacionada a alterações estruturais recentes (a transposição duplicativa Xq21.3/Yp dos cromossomos sexuais.OBJETIVO: Asimetría cerebral (el torque del frontal derecho al occipital izquierdo es la característica definidora del cerebro humano y, conforme al propuesto por Broca, el correlato neuronal putativo del lenguaje. Si, conforme a lo sugerido, la esquizofrenia es el precio que el Homo sapiens debe pagar por el lenguaje, el torque, juntamente con sus correlatos funcionales, es de importancia fundamental. Se revisan recientes evidencias obtenidas a partir de estudios

  7. A Study on intensifying efficiency for international collaborative development of Advanced Nuclear Energy Technology

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Moon Hee; Kim, H. R.; Kim, H. J.; Chang, J. H.; Hahn, D. H.; Bae, Y. Y.; Kim, W. W.; Jeong, I.; Lee, D. S.; Lee, J. H. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2008-06-15

    Generation IV International Forum(GIF), where 13 countries including Korea collaborate to develop future nuclear energy systems, put into force 'Generation IV International Forum Project Arrangement' in 2007 for the international research and development of Gen IV Systems, following the entry into force of Framework Agreement in 2005. The International Nuclear Research Initiative(I-NERI) between Korea and United States and the International Project on Innovative Nuclear Energy Systems and Fuel Cycles(INPRO) of IAEA are continued in this year, produced lots of visible outcomes. These international activities have a common goal of the collaborative development of advanced nuclear system technologies but differ in the main focusing areas and aspects, so Korea needs to establish the integrated strategy based on the distinguished and complementary approach for the participation of each international programs, as examples the GIF for the advanced system technology development, INPRO for the set-up of institution and infra-structure, and I-NERI for the access of the core technologies and acquisition of the transparency of nuclear R and D.

  8. A Study on intensifying efficiency for international collaborative development of Advanced Nuclear Energy Technology

    International Nuclear Information System (INIS)

    Chang, Moon Hee; Kim, H. R.; Kim, H. J.; Chang, J. H.; Hahn, D. H.; Bae, Y. Y.; Kim, W. W.; Jeong, I.; Lee, D. S.; Lee, J. H.

    2008-06-01

    Generation IV International Forum(GIF), where 13 countries including Korea collaborate to develop future nuclear energy systems, put into force 'Generation IV International Forum Project Arrangement' in 2007 for the international research and development of Gen IV Systems, following the entry into force of Framework Agreement in 2005. The International Nuclear Research Initiative(I-NERI) between Korea and United States and the International Project on Innovative Nuclear Energy Systems and Fuel Cycles(INPRO) of IAEA are continued in this year, produced lots of visible outcomes. These international activities have a common goal of the collaborative development of advanced nuclear system technologies but differ in the main focusing areas and aspects, so Korea needs to establish the integrated strategy based on the distinguished and complementary approach for the participation of each international programs, as examples the GIF for the advanced system technology development, INPRO for the set-up of institution and infra-structure, and I-NERI for the access of the core technologies and acquisition of the transparency of nuclear R and D

  9. Improved methods for prediction of creep-fatigue in next generation conventional and nuclear plant

    International Nuclear Information System (INIS)

    Payten, Warwick

    2012-01-01

    Materials technology poses a major challenge in the design and construction of next generation super critical/ultra super critical power plant (SC/USC) and Generation IV (GenIV) nuclear plant. New plant is expected to have in the order of a 60 year life-time, imposing complex design difficulties in areas of creep rupture and creep fatigue damage. For SC/USC plant, the main goal is the enhancement of performance by raising the steam pressure and temperatures. In order to achieve these goals materials with acceptable creep rupture strength at design temperatures and pressures must be used. In GenIV designs, the issue is more complex, with both low and high tempera-ture designs. A key requirement in the majority of the designs, however, will be acceptable resistance to creep rupture, fatigue cracking, creep fatigue interactions, with the additional effects of void swelling and irradiation creep. The accumulation of creep fatigue damage over time in both SC/USC and GenIV plant will be one of the principal damage mechanisms. This will eventually lead to crack initiation in critical high temperature equipment. Hence, improved knowledge of creep and fatigue interactions is a necessary development as components in power-generating plants move to operate at high temperature under cyclic conditions. The key to safe, reliable operation of these high-energy plants will depend on understanding the factors that affect damage initiation and propagation, as well as developing and validating technologies to predict the accumulation of damage in systems and components.

  10. Report on generation IV technical working group 3 : liquid metal reactors

    International Nuclear Information System (INIS)

    Lineberry, M. J.; Rosen, S. L.; Sagayama, Y.

    2002-01-01

    This paper reports on the first round of R and D roadmap activities of the Generation IV (Gen IV) Technical Working Group (TWG) 3, on liquid metal-cooled reactors. Liquid metal coolants give rise to fast spectrum systems, and thus the reactor systems considered in this TWG are all fast reactors. Gas-cooled fast reactors are considered in the context of TWG 2. As is noted in other Gen IV papers, this first round activity is termed ''screening for potential'', and includes collecting the most complete set of liquid metal reactor/fuel cycle system concepts possible and evaluating the concepts against the Gen IV principles and goals. Those concepts or concept groups that meet the Gen IV principles and which are deemed to have reasonable potential to meet the Gen IV goals will pass to the next round of evaluation. Although we sometimes use the terms ''reactor'' or ''reactor system'' by themselves, the scope of the investigation by TWG 3 includes not only the reactor systems, but very importantly the closed fuel recycle system inevitably required by fast reactors. The response to the DOE Request for Information (RFI) on liquid metal reactor/fuel cycle systems from principal investigators, laboratories, corporations, and other institutions, was robust and gratifying. Thirty three liquid metal concept descriptions, from eight different countries, were ultimately received. The variation in the scope, depth, and completeness of the responses created a significant challenge for the group, but the TWG made a very significant effort not to screen out concepts early in the process

  11. ISOLA II: a FORTRAN IV program for the calculation of long-term dose distribution in the vicinity of nuclear installations

    International Nuclear Information System (INIS)

    Huebschmann, W.; Nagel, D.

    The computer code ISOLA serves for the annual calculation of the radiation burden of the environment of the Nuclear Research Center at Karlsruhe resulting from the release of alpha-active and beta-active off-gases. In the improved version ISOLA II the model of a double Gaussian Distribution function is strictly-maintained, so that the influence due to neighboring sectors is included. The emissions are assumed to be constant in time during a given time period. The user may select either the print-out of an isodose map for a desired area (for example a map square 20 km on each edge) or he may obtain a list of doses for up to 2000 filed points (for example in the surrounding communities). The input and output forms will be shown by the use of an example

  12. Reactor safety study. An assessment of accident risks in U. S. commercial nuclear power plants. Appendices III and IV. [PWR and BWR

    Energy Technology Data Exchange (ETDEWEB)

    1975-10-01

    The items listed below summarize the detail sections which follow: a listing of definitions and a discussion of the general treatment of data within the random variable approach as utilized by the study; a tabulation of the assessed data base containing failure classifications, final assessed ranges utilized in quantification and reference source values considered in determining the ranges; a discussion of nuclear power plant experience that was used to validate the data assessment by testing its applicability as well as to check on the adequacy of the model to incorporate typical real incidents; an expanded presentation of the data assessment giving information on applicability considerations; a discussion of test and maintenance data including comparisons of models with experience data; and special topics, including assessments required for the initiating event probabilities and human error data and modeling.

  13. ISOLA II - A FORTRAN IV code for the calculation of the long-term α- and β-dose distributions in the vicinity of nuclear installations

    International Nuclear Information System (INIS)

    Huebschmann, W.; Nagel, D.

    1975-12-01

    The computer code ISOLA is used to calculate the annual radiation doses caused by α- and β-active off-gases in the environment of the Karlsruhe Nuclear Research Center. In the revised version ISOLA II the double Gaussian distribution model is strictly observed. As a consequence, the contribution of activity from neighbour sectors is taken into account. Up to 15 emitters may be coped with simultaneously. The emission rates are considered to be constant during the given time interval. Optionally either the isodoses chart of a specified area (for instance a square 20 by 20 km) or a list of doses calculated at up to 2,000 locations (for instance the living areas) in the environment may be set up. Input and output are shown for a specific case. (orig.) [de

  14. Recruiting Program for the Future R and D Leader in Nuclear Science and Technology

    International Nuclear Information System (INIS)

    Song, Keechan; Im, Ohsoo; Cho, Changyun; Min, Hwanki; Lee, Jungkong; Jung, Sunghyun; Kim, Jungbae; Joo, Hoyoung

    2013-05-01

    Nuclear technology export, which is represented by a nuclear research reactor, Gen-IV nuclear system development and nuclear safety research are the current key issues in the nuclear field. In order to achieve these missions in the nuclear industry, nuclear HRD(human resource development). However, recruiting of young scientists and researchers in the nuclear field has not been sufficient for last 10 years. Moreover, many experienced persons have been retired during this period. Under these circumstances, the structure of the nuclear experts wind up with vary distorted one. As one of comprehensive countermeasures, the recruiting program for the future R and D leaders come to issues. The human network to lead future R and Ds in the nuclear science and technology is set up, and this network is persistantly maintained and expanded to recruit potential leaders in the nuclear R and D and industry. As one of these strategy and plans for recruiting competent young scientists, who are studying in the U. S., the 2 times briefing meeting were held, and human networking and expertise DB for more than 300 participants were established

  15. Development of Nuclear Fuel Remote Fabrication Technology

    International Nuclear Information System (INIS)

    Lee, Jung Won; Yang, M. S.; Kim, S. S. and others

    2005-04-01

    The aim of this study is to develop the essential technology of dry refabrication using spent fuel materials in a laboratory scale on the basis of proliferation resistance policy. The emphasis is placed on the assessment and the development of the essential technology of dry refabrication using spent fuel materials. In this study, the remote fuel fabrication technology to make a dry refabricated fuel with an enhanced quality was established. And the instrumented fuel pellets and mini-elements were manufactured for the irradiation testing in HANARO. The design and development technology of the remote fabrication equipment and the remote operating and maintenance technology of the equipment in hot cell were also achieved. These achievements will be used in and applied to the future back-end fuel cycle and GEN-IV fuel cycle and be a milestone for Korea to be an advanced nuclear country in the world

  16. Regenerative Heater Optimization for Steam Turbo-Generation Cycles of Generation IV Nuclear Power Plants with a Comparison of Two Concepts for the Westinghouse International Reactor Innovative and Secure (IRIS)

    International Nuclear Information System (INIS)

    Williams, W.C.

    2002-01-01

    The intent of this study is to discuss some of the many factors involved in the development of the design and layout of a steam turbo-generation unit as part of a modular Generation IV nuclear power plant. Of the many factors involved in the design and layout, this research will cover feed water system layout and optimization issues. The research is arranged in hopes that it can be generalized to any Generation IV system which uses a steam powered turbo-generation unit. The research is done using the ORCENT-II heat balance codes and the Salisbury methodology to be reviewed herein. The Salisbury methodology is used on an original cycle design by Famiani for the Westinghouse IRIS and the effects due to parameter variation are studied. The vital parameters of the Salisbury methodology are the incremental heater surface capital cost (S) in $/ft 2 , the value of incremental power (I) in $/kW, and the overall heat transfer coefficient (U) in Btu/ft 2 -degrees Fahrenheit-hr. Each is varied in order to determine the effects on the cycles overall heat rate, output, as well as, the heater surface areas. The effects of each are shown. Then the methodology is then used to compare the optimized original Famiani design consisting of seven regenerative feedwater heaters with an optimized new cycle concept, INRC8, containing four regenerative heaters. The results are shown. It can be seen that a trade between the complexity of the seven stage regenerative Famiani cycle and the simplicity of the INRC8 cycle can be made. It is desired that this methodology can be used to show the ability to evaluate modularity through the value of size a complexity of the system as well as the performance. It also shows the effectiveness of the Salisbury methodology in the optimization of regenerative cycles for such an evaluation

  17. Generation IV national program

    International Nuclear Information System (INIS)

    Preville, M.; Sadhankar, R.; Brady, D.

    2007-01-01

    This paper outlines the Generation IV National Program. This program involves evolutionary and innovative design with significantly higher efficiencies (∼50% compared to present ∼30%) - sustainable, economical, safe, reliable and proliferation resistant - for future energy security. The Generation IV Forum (GIF) effectively leverages the resources of the participants to meet these goals. Ten countries signed the GIF Charter in 2001

  18. Unleashing Gen Y: Marketing Mars to Millennials

    Science.gov (United States)

    Leahy, Bart D.; Hidalgo, Loretta; Kloberdanz, Cassie

    2007-01-01

    Space advocates need to engage Generation Y (born 1977-1999).This outreach is necessary to recruit the next generation of scientists and engineers to explore Mars. Space advocates in the non-profit, private, and government sectors need to use a combination of technical communication, marketing, and politics, to develop messages that resonate with Gen Y. Until now, space messages have been generated by and for college-educated white males; Gen Y is much more diverse, including as much as one third minorities. Young women, too, need to be reached. My research has shown that messages emphasizing technology, fun, humor, and opportunity are the best means of reaching the Gen Y audience of 60 million (US population is 300 million). The important things space advocates must avoid are talking down to this generation, making false promises, or expecting them to "wait their turn" before they can participate. This is the MTV generation! We need to find ways of engaging Gen Y now to build a future where human beings can live and work on the planet Mars. In addition to the messages themselves, advocates need to keep up with Gen Y' s social networking and use of iPods, cell phones, and the Internet. NASA and space advocacy groups can use these tools for "viral marketing," where young people share targeted space-related information via cell phones or the Internet because they like it. Overall, Gen Y is a socially dynamic and media-savvy group; advocates' space messages need to be sincere, creative, and placed in locations where Gen Y lives. Mars messages must be memorable!

  19. Generation IV nuclear energy systems: road map and concepts. 3. Measurement and Analysis of Conducted Noise at Main Control Room in Uljin NPP

    International Nuclear Information System (INIS)

    Goo, Cheol-Soo; Kim, Bok-Ryul; Cho, Won-Seo

    2001-01-01

    The utility has implemented digital technology into the design of the plant protection system in new nuclear power plants (NPPs) and also replaced existing analog instrumentation and control (I and C) systems with computer-based digital I and C systems as the analog systems become obsolete. Digital I and C systems, which provide more operating capabilities than analog systems, operate at conditions that are more vulnerable to EMI/RFI than existing analog systems. The purpose of the site survey is to get the actual electromagnetic measurement (EM) level in NPPs and to eliminate the need for plant-specific EM at the point of installation to demonstrate the sufficiency of equipment test levels. Actual electromagnetic environments in NPPs are major elements to decide the limit for the susceptibility of the installed equipment. The data obtained with standard methods are indispensable to make guidelines for an electromagnetic qualification test for the equipment to be installed in the NPP. We performed EM at the power ports of the Plant Control System (PCS) and the Core Protection Calculator (CPC) in Uljin to obtain the conducted noise level, which can be utilized to determine the electromagnetic environment test limit for the equipment qualification test. The continuous conducted noise and discontinuous transient or surge at the power ports of the PCS and the CPC installed at the no.3 main control room in the Uljin NPP were measured and analyzed. The measurements were continuously conducted for 2 weeks of the power-escalated phase with reactor power from 0% to full power. The measurements selected for the power leaders were the current and voltage of the power cables using a current and voltage (passive) probe, EMI test receiver, and notebook computer. The data were recorded in accordance with standard industry practices and procedures. The conducted noise current was measured over the frequency range of 30 Hz to 50 kHz, and the voltage was captured over the frequency

  20. Nuclear

    International Nuclear Information System (INIS)

    2014-01-01

    This document proposes a presentation and discussion of the main notions, issues, principles, or characteristics related to nuclear energy: radioactivity (presence in the environment, explanation, measurement, periods and activities, low doses, applications), fuel cycle (front end, mining and ore concentration, refining and conversion, fuel fabrication, in the reactor, back end with reprocessing and recycling, transport), the future of the thorium-based fuel cycle (motivations, benefits and drawbacks), nuclear reactors (principles of fission reactors, reactor types, PWR reactors, BWR, heavy-water reactor, high temperature reactor of HTR, future reactors), nuclear wastes (classification, packaging and storage, legal aspects, vitrification, choice of a deep storage option, quantities and costs, foreign practices), radioactive releases of nuclear installations (main released radio-elements, radioactive releases by nuclear reactors and by La Hague plant, gaseous and liquid effluents, impact of releases, regulation), the OSPAR Convention, management and safety of nuclear activities (from control to quality insurance, to quality management and to sustainable development), national safety bodies (mission, means, organisation and activities of ASN, IRSN, HCTISN), international bodies, nuclear and medicine (applications of radioactivity, medical imagery, radiotherapy, doses in nuclear medicine, implementation, the accident in Epinal), nuclear and R and D (past R and D programmes and expenses, main actors in France and present funding, main R and D axis, international cooperation)

  1. Neptunium (IV) oxalate solubility

    International Nuclear Information System (INIS)

    Luerkens, D.W.

    1983-07-01

    The equilibrium solubility of neptunium (IV) oxalate in nitric/oxalic acid solutions was determined at 22 0 C, 45 0 C, and 60 0 C. The concentrations of nitric/oxalic acid solutions represented a wide range of free oxalate ion concentration. A mathematical solubility model was developed which is based on the formation of the known complexes of neptunium (IV) oxalate. the solubility model uses a simplified concentration parameter which is proportional to the free oxalate ion concentration. The solubility model can be used to estimate the equilibrium solubility of neptunium (IV) oxalate over a wide range of oxalic and nitric acid concentrations at each temperature

  2. Estatus de parámetros oxidativos y del gen p53 en sangre de niños en edad escolar de zonas afectadas por el accidente nuclear de Chernobyl.

    OpenAIRE

    García Mora, Mª Carmen

    2004-01-01

    RESUMEN Tras el accidente nuclear de Chernobyl producido el 26 de abril de 1986 se liberaron muchos radioisótopos, produciendo la contaminación del medio ambiente, con la consiguiente implicación sobre la salud de las personas afectadas. La irradiación produce su efecto sobre el material biológico de manera directa, como consecuencia inmediata de la ionización inducida por la irradiación y de manera indirecta, que al interaccionar sobre cualquier estructura celular, esencialmente el agua t...

  3. Technology Roadmap Instrumentation, Control, and Human-Machine Interface to Support DOE Advanced Nuclear Energy Programs

    Energy Technology Data Exchange (ETDEWEB)

    Donald D Dudenhoeffer; Burce P Hallbert

    2007-03-01

    Instrumentation, Controls, and Human-Machine Interface (ICHMI) technologies are essential to ensuring delivery and effective operation of optimized advanced Generation IV (Gen IV) nuclear energy systems. In 1996, the Watts Bar I nuclear power plant in Tennessee was the last U.S. nuclear power plant to go on line. It was, in fact, built based on pre-1990 technology. Since this last U.S. nuclear power plant was designed, there have been major advances in the field of ICHMI systems. Computer technology employed in other industries has advanced dramatically, and computing systems are now replaced every few years as they become functionally obsolete. Functional obsolescence occurs when newer, more functional technology replaces or supersedes an existing technology, even though an existing technology may well be in working order.Although ICHMI architectures are comprised of much of the same technology, they have not been updated nearly as often in the nuclear power industry. For example, some newer Personal Digital Assistants (PDAs) or handheld computers may, in fact, have more functionality than the 1996 computer control system at the Watts Bar I plant. This illustrates the need to transition and upgrade current nuclear power plant ICHMI technologies.

  4. NNDSS - Table IV. Tuberculosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table IV. Tuberculosis - 2016.This Table includes total number of cases reported in the United States, by region and by states, in accordance with the...

  5. NNDSS - Table IV. Tuberculosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table IV. Tuberculosis - 2014.This Table includes total number of cases reported in the United States, by region and by states, in accordance with the...

  6. NNDSS - Table IV. Tuberculosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table IV. Tuberculosis - 2015.This Table includes total number of cases reported in the United States, by region and by states, in accordance with the...

  7. SAGE IV Pathfinder

    Data.gov (United States)

    National Aeronautics and Space Administration — Utilizing a unique, new occultation technique involving imaging, the SAGE IV concept will meet or exceed the quality of previous SAGE measurements at a small...

  8. Description of Guyruita gen. nov. and two new species (Ischnocolinae, Theraphosidae Descrição de Guyruita gen. nov. e duas novas espécies (Ischnocolinae, Theraphosidae

    Directory of Open Access Journals (Sweden)

    José P.L. Guadanucci

    2007-12-01

    Full Text Available The genus Guyruita gen. nov. and two new species from Brazil are described. Holothele waikoshiemi (Bertani & Araújo, 2005 from Venezuela is transferred here to the new genus. Guyruita gen. nov. differs from the remaining Ischnocolinae by the following features: labium densely occupied by a lot of cuspules (more than 100, intercheliceral intumescence absent, posterior sternal sigilla remote from margin, tarsal claws without teeth, tarsal scopula I-II undivided (tarsus II with a line of sparse setae, which does not divide the scopula, III-IV divided.É descrito o gênero Guyruita gen. nov. e duas espécies novas do Brasil. Holothele waikoshiemi (Bertani & Araújo, 2005 da Venezuela é transferido para o novo gênero. Guyruita gen. nov. difere dos outros Ischnocolinae pelas seguintes caracterísicas: lábio densamente ocupado por muitas cúspides (mais de 100, tumescência interqueliceral ausente, sigilla esternal posterior distante da margem, unhas tarsais sem dentes, escópula tarsal I e II inteiras (tarso II com uma fileira de cerdas esparsas, as quais não dividem a escópula, III e IV divididas.

  9. Algoritmos para genómica comparativa

    OpenAIRE

    Figueiras, Vasco da Rocha

    2010-01-01

    Com o surgimento da Genómica e da Proteómica, a Bioinformática conduziu a alguns dos avanços científicos mais relevantes do século XX. A Unidade de Investigação e Desenvolvimento do Biocant, parque biotecnológico de Cantanhede, assume actualmente o papel de motor no desenvolvimento da Genómica. O Biocant possui um importante sequenciador de larga escala que permite armazenar um elevado número de genomas, nomeadamente, genomas de bactérias. O estudo proposto reflecte a necessidade do Bio...

  10. Basic research in support of innovative fuels design for the Generation IV systems (F-BRIDGE project)

    International Nuclear Information System (INIS)

    Valot, Carole; Bertolus, Marjorie; Konings, Rudy; Somers, Joe; Groot, Sander de

    2010-01-01

    F-BRIDGE (Basic Research in support of Innovative Fuels Design for the GEN IV systems) is a 4-year project which started in 2008. It seeks to bridge the gap between basic research and technological applications for generation IV nuclear reactor systems. One of the challenges for the next generation of reactors is to significantly increase the efficiency in designing innovative fuels. The object of the F-BRIDGE project is to complement the empirical approach by a physically-based description of fuel and cladding materials to enable a rationalization of the design process and a better selection of promising fuel systems. Advanced modelling and separate effects experiments are carried out in order to obtain more exact physical descriptions of ceramic fuels and cladding, at relevant scales from the atomic to the macroscopic scale. Research is also focused on assessing and improving 'sphere-pac' fuel, a composite-ceramics concept which has shown promise. The project activities can be broken down into four main areas: (i) Basic research investigations using a multi-scale approach in both experimentation and modelling to enable the generation of missing basic data, the identification of relevant mechanisms and the development of appropriate models; (ii) Transfer between technological issues and basic research by bringing together within the same project materials scientists, engineers and end-users; (iii) Assessment of the drawbacks and benefits of the sphere-pac fuel application to various Generation IV systems; (iv) Education and training to promote research in the field of fuel materials, to ensure the exchange of results and ideas among the participants and to link the project with other related European or international initiatives. The project relies on the complementary expertise of 19 partners: nuclear and non nuclear research organisations, universities, a nuclear engineering company, as well as technology and project management consultancy small and medium

  11. Complexation of the An(IV) by NTA; Complexation des An(IV) par le NTA

    Energy Technology Data Exchange (ETDEWEB)

    Bonin, L. [Paris-11 Univ., 91 - Orsay (France)]|[CEA Valrho, Lab. de Chimie des Actinides (LCA), 30 - Marcoule (France)

    2006-07-01

    In the framework of the Nuclear and Environmental Toxicology program, developed in France, it has been decided to take again the studies concerning the actinides decorporation. A similar study of the neptunium complexation by the citrate ions has been carried out on the complexation of Np(IV) with the nitrilotriacetic acid (NTA). The NTA can be considered as a model molecule of the de-corporating molecules (amino-carboxy- ligand). The results of the spectrophotometric measurements being encouraging, the behaviour of several actinides at the same oxidation state (+IV) (Th(IV), U(IV), Np(IV), and Pu(IV)) has been determined. The experimental results are presented. In order to determine the structure of the complexes of stoichiometry 1:2 An(IV)-(NTA){sub 2} in solution, quantic chemistry calculations and EXAFS measurements have been carried out in parallel. These studies confirm the presence of An(IV)-nitrogen bonds whose length decreases from thorium to plutonium and indicate the presence of a water molecule bound to the thorium and the uranium (coordination number 8 for Np/Pu, 9 for Th/U). The evolution of the complexation constants determined in this study in terms of 1/r (r ionic radius of the cation taking into account its coordination number 8 or 9) confirms the change of the coordination number between Th/U and Np/Pu. (O.M.)

  12. The carbonate complexation of plutonium(IV)

    International Nuclear Information System (INIS)

    Hobart, D.E.; Palmer, P.D.; Newton, T.W.

    1985-01-01

    Plutonium(IV) carbonate complexes are expected to be of particular importance in typical groundwaters at the Yucca Mountain site of the candidate nuclear waste repository being studied by the Nevada Nuclear Waste Storage Investigations Project. The chemistry of these complexes is also important in the areas of nuclear fuel reprocessing and purification, actinide separations, and environmental studies. This report describes initial experiments performed to determine the identity and equilibrium quotients of plutonium(IV) carbonate complexes. These experiments were performed at pH values between 7.2 and 9.6 using a spectrophotometric method. In addition, a brief review of the published literature on Pu(IV) carbonate complexes is presented. Since Pu(IV) exhibits low solubility in the near-neutral pH range, a complex-competition reaction where citrate ligands compete with carbonate ions for the plutonium will be employed. This will permit us to study the pure carbonate system; study the mixed carbonate/citrate system, and confirm and extend the literature work on the pure citrate system. The current experiments have demonstrated the existence of at least three distinct species in the pH region studied. This work will continue in the extended study of the pure citrate system, followed by the investigation of the citrate/carbonate complex/competition reaction. 9 refs., 4 figs., 2 tabs

  13. Proceedings of NUCLEAR 2013 the 6th annual international conference on sustainable development through nuclear research and education. Part 1/3

    International Nuclear Information System (INIS)

    Constantin, Marin; Turcu, Ilie

    2013-01-01

    The proceedings of the NUCLEAR 2013 international conference on sustainable development through nuclear research and education held at INR-Pitesti on May, 2-24 2013 contain 79 communications presented in two plenary sessions (6 and 8 talks, respectively) and three sections addressing the themes of Nuclear energy, Environmental protection, and Sustainable development . In turn these sections are addressing the following items: Section 1.1 - Nuclear Technology and Materials (33 papers); Section 1.2 Nuclear Safety and Sever Accidents (16 papers); 1.3 Nuclear Reactors and Gen IV (20 papers); 2.1 Radioactive Waste Management (13 papers); 2.2 Radioprotection and 2.3 Air, Water, Soil Protection (17 papers); 3.1 Polices and Strategies in Nuclear Research (0 papers); 3.2 International Partnership for a Sustainable Development (2 papers); 3.3 Education, Continuous Formation and Knowledge Transfer (1 papers). These papers are presented as abstracts in 'Nuclear 2013 - Book of Abstracts', separately processed

  14. Proceedings of NUCLEAR 2015 the 8th annual international conference on sustainable development through nuclear research and education. Part 1/3

    International Nuclear Information System (INIS)

    Constantin, Marin; Turcu, Ilie

    2015-01-01

    The proceedings of the NUCLEAR 2015 the 8"t"h annual international conference on sustainable development through nuclear research and education. Part 1/3 held at INR-Pitesti on May, 27-29 contain 62 communications presented in two plenary sessions and three sections addressing the themes of Nuclear energy, Environmental protection and Sustainable development. In turn these sections are addressing the following items: Section 1.1 Nuclear safety and severe accidents (7 papers); Section 1.2 Nuclear reactors and gen. IV (5 papers); Section 1.3 Nuclear technology and materials (19 papers); Section 2.1 Radioprotection & air, water and soil protection (1 paper); Section 2.2 Radioactive waste management (9 papers); Section 3.1 policies and strategies in nuclear research (1 paper); Section 3.2 Education, training and knowledge management (16 papers); Section 3.3 International partnership for a sustainable development (4 papers). These papers are presented as abstracts in 'Nuclear 2015 - Book of Abstracts', separately processed

  15. Preserving Accuracy in GenBank

    DEFF Research Database (Denmark)

    Bidartondo, M.I.; Bruns, T. D.; Blackwell, M.

    2008-01-01

    GenBank, the public repository for nucleotide and protein sequences, is a critical resource for molecular biology, evolutionary biology, and ecology. While some attention has been drawn to sequence errors (1), common annotation errors also reduce the value of this database. In fact, for organisms...

  16. Teleport Generation 3 (Teleport Gen 3)

    Science.gov (United States)

    2016-03-01

    for high- throughput multi-band and multimedia connectivity from deployed locations to DISN and DoD Information Network (DoDIN) information sources and...2016 Major Automated Information System Annual Report Teleport Generation 3 (Teleport Gen 3) Defense Acquisition Management Information Retrieval...Program Information 4 Responsible Office 4 References 4 Program Description 5 Business Case 6 Program Status 8 Schedule 9

  17. Divergência genética entre genótipos de frangos tipo caipira

    Directory of Open Access Journals (Sweden)

    R. C. Veloso

    2015-10-01

    Full Text Available RESUMOObjetivou-se com este trabalho verificar a divergência genética entre sete genótipos de frangos tipo caipira da linhagem Redbro utilizando as características de desempenho por meio de técnicas de análise multivariada. Foram utilizados 840 pintos de um dia, machos, distribuídos em delineamento inteiramente ao acaso, dos seguintes genótipos: Caboclo, Carijó, Colorpak, Gigante Negro, Pesadão Vermelho, Pescoço Pelado e Tricolor. Após a consistência dos dados, foram avaliadas as seguintes variáveis: ganho em peso médio diário, consumo de ração médio diário e conversão alimentar, para os períodos: 1 a 28, 1 a 56, 1 a 70 e 1 a 84 dias de idade; peso corporal ao nascimento, aos 28, 56, 70 e aos 84 dias de idade. O desempenho dos genótipos foi avaliado por meio da análise de variância multivariada e da função discriminante linear de Fisher, usando os testes do maior autovalor de Roy e da união-interseção de Roy para as comparações múltiplas. O estudo da divergência genética foi feito por meio da análise por variáveis canônicas e pelo método de otimização de Tocher. Os genótipos Caboclo e Gigante Negro apresentaram médias canônicas diferentes dos demais genótipos. As duas primeiras variáveis canônicas explicaram 97,41% da variação entre os genótipos. A divergência genética entre os genótipos avaliados permitiu a formação de quatro grupos com os seguintes genótipos: grupo 1 - Colorpak; grupo 2 - Pesadão Vermelho e Pescoço Pelado; grupo 3 - Carijó e Tricolor; e grupo 4 - Caboclo e Gigante Negro.

  18. Next Gen One Portal Usability Evaluation

    Science.gov (United States)

    Cross, E. V., III; Perera, J. S.; Hanson, A. M.; English, K.; Vu, L.; Amonette, W.

    2018-01-01

    Each exercise device on the International Space Station (ISS) has a unique, customized software system interface with unique layouts / hierarchy, and operational principles that require significant crew training. Furthermore, the software programs are not adaptable and provide no real-time feedback or motivation to enhance the exercise experience and/or prevent injuries. Additionally, the graphical user interfaces (GUI) of these systems present information through multiple layers resulting in difficulty navigating to the desired screens and functions. These limitations of current exercise device GUI's lead to increased crew time spent on initiating, loading, performing exercises, logging data and exiting the system. To address these limitations a Next Generation One Portal (NextGen One Portal) Crew Countermeasure System (CMS) was developed, which utilizes the latest industry guidelines in GUI designs to provide an intuitive ease of use approach (i.e., 80% of the functionality gained within 5-10 minutes of initial use without/limited formal training required). This is accomplished by providing a consistent interface using common software to reduce crew training, increase efficiency & user satisfaction while also reducing development & maintenance costs. Results from the usability evaluations showed the NextGen One Portal UI having greater efficiency, learnability, memorability, usability and overall user experience than the current Advanced Resistive Exercise Device (ARED) UI used by astronauts on ISS. Specifically, the design of the One-Portal UI as an app interface similar to those found on the Apple and Google's App Store, assisted many of the participants in grasping the concepts of the interface with minimum training. Although the NextGen One-Portal UI was shown to be an overall better interface, observations by the test facilitators noted specific exercise tasks appeared to have a significant impact on the NextGen One-Portal UI efficiency. Future updates to

  19. Nuclear Data Measurements for 21st Century Reactor Physics Applications

    Energy Technology Data Exchange (ETDEWEB)

    Rahmat Aryaeinejad; Jerald D. Cole; Mark W. Drigert; James K. Jewell; Christopher A. McGrath; David W. Nigg; Edward L. Reber

    2003-03-01

    The United States Department of Energy (DOE), Office of Nuclear Energy (NE) has embarked on a long-term program to significantly advance the science and technology of nuclear energy. This is in response to the overall national plan for accelerated development of domestic energy resources on several fronts, punctuated by recent dramatic events that have emphasized the need for the US to reduce its dependence on foreign petroleum supplies. Key aspects of the DOE-NE agenda are embodied in the Generation-IV (Gen-IV) advanced nuclear energy systems development program and in the Advanced Fuel Cycle (AFC) program. The planned efforts involve near-term and intermediate-term improvements in fuel utilization and recycling in current nuclear power reactor systems as well as the longer-term development of new nuclear energy systems that offer much improved fuel utilization and proliferation resistance, along with continued advances in operational safety. The success of the overall NE effort will depend not only on sophisticated system development and engineering, but also on the advances in the supporting sciences and technologies. Of these, one of the most important is the improvement of the relevant fundamental nuclear science data bases, especially the evaluated neutron interaction cross section files that serve as the foundation of all reactor system designs, operating strategies, and fuel cycle engineering activities. The new concepts for reactors and fuel cycles involve the use of transuranic nuclides that were previously of little interest, and where experimentally measured information is lacking. The current state of the cross section database for some of these nuclides is such that design computations for advanced fast-spectrum reactor systems and fuel cycles that incorporate such materials in significant quantities are meaningful only for approximate conceptual applications. No actual system could reliably be designed according to currently accepted standards, nor

  20. Nuclear Data Measurements for 21st Century Reactor Physics Applications

    International Nuclear Information System (INIS)

    Rahmat Aryaeinejad; Jerald D. Cole; Mark W. Drigert; James K. Jewell; Christopher A. McGrath; David W. Nigg; Edward L. Reber

    2003-01-01

    The United States Department of Energy (DOE), Office of Nuclear Energy (NE) has embarked on a long-term program to significantly advance the science and technology of nuclear energy. This is in response to the overall national plan for accelerated development of domestic energy resources on several fronts, punctuated by recent dramatic events that have emphasized the need for the US to reduce its dependence on foreign petroleum supplies. Key aspects of the DOE-NE agenda are embodied in the Generation-IV (Gen-IV) advanced nuclear energy systems development program and in the Advanced Fuel Cycle (AFC) program. The planned efforts involve near-term and intermediate-term improvements in fuel utilization and recycling in current nuclear power reactor systems as well as the longer-term development of new nuclear energy systems that offer much improved fuel utilization and proliferation resistance, along with continued advances in operational safety. The success of the overall NE effort will depend not only on sophisticated system development and engineering, but also on the advances in the supporting sciences and technologies. Of these, one of the most important is the improvement of the relevant fundamental nuclear science data bases, especially the evaluated neutron interaction cross section files that serve as the foundation of all reactor system designs, operating strategies, and fuel cycle engineering activities. The new concepts for reactors and fuel cycles involve the use of transuranic nuclides that were previously of little interest, and where experimentally measured information is lacking. The current state of the cross section database for some of these nuclides is such that design computations for advanced fast-spectrum reactor systems and fuel cycles that incorporate such materials in significant quantities are meaningful only for approximate conceptual applications. No actual system could reliably be designed according to currently accepted standards, nor

  1. The European gen-set market: growth and consolidation mean joy and pain

    International Nuclear Information System (INIS)

    French, Ian

    2000-01-01

    The changes in the European gen-set market are discussed. In recent years the market has undergone a period of increasing consolidation: prices fell and some companies folded. However, the market is not dead and continued growth is expected over the next five years although the compound rate is forecast to be only 1.5%. The article is presented under the sub-headings of (i) current market situation; (ii) product lifecycle; (iii) shipments by technology; (iv) market deregulation; (v) technology overview (spark ignition, compression ignition and gas turbines) (vi) European market: national overview and (vii) key market challenges (competition, emissions and over capacity)

  2. Generation IV reactors: international projects

    International Nuclear Information System (INIS)

    Carre, F.; Fiorini, G.L.; Kupitz, J.; Depisch, F.; Hittner, D.

    2003-01-01

    Generation IV international forum (GIF) was initiated in 2000 by DOE (American department of energy) in order to promote nuclear energy in a long term view (2030). GIF has selected 6 concepts of reactors: 1) VHTR (very high temperature reactor system, 2) GHR (gas-cooled fast reactor system), 3) SFR (sodium-cooled fast reactor system, 4) SCWR (super-critical water-cooled reactor system), 5) LFR (lead-cooled fast reactor system), and 6) MFR (molten-salt reactor system). All these 6 reactor systems have been selected on criteria based on: - a better contribution to sustainable development (through their aptitude to produce hydrogen or other clean fuels, or to have a high energy conversion ratio...) - economic profitability, - safety and reliability, and - proliferation resistance. The 6 concepts of reactors are examined in the first article, the second article presents an overview of the results of the international project on innovative nuclear reactors and fuel cycles (INPRO) within IAEA. The project finished its first phase, called phase-IA. It has produced an outlook into the future role of nuclear energy and defined the need for innovation. The third article is dedicated to 2 international cooperations: MICANET and HTR-TN. The purpose of MICANET is to propose to the European Commission a research and development strategy in order to develop the assets of nuclear energy for the future. Future reactors are expected to be more multiple-purposes, more adaptable, safer than today, all these developments require funded and coordinated research programs. The aim of HTR-TN cooperation is to promote high temperature reactor systems, to develop them in a long term perspective and to define their limits in terms of burn-up and operating temperature. (A.C.)

  3. IV access in dental practice.

    LENUS (Irish Health Repository)

    Fitzpatrick, J J

    2009-04-01

    Intravenous (IV) access is a valuable skill for dental practitioners in emergency situations and in IV sedation. However, many people feel some apprehension about performing this procedure. This article explains the basic principles behind IV access, and the relevant anatomy and physiology, as well as giving a step-by-step guide to placing an IV cannula.

  4. Technology Roadmap on Instrumentation, Control, and Human-Machine Interface to Support DOE Advanced Nuclear Energy Programs

    International Nuclear Information System (INIS)

    Donald D Dudenhoeffer; Burce P Hallbert

    2007-01-01

    Instrumentation, Controls, and Human-Machine Interface (ICHMI) technologies are essential to ensuring delivery and effective operation of optimized advanced Generation IV (Gen IV) nuclear energy systems. In 1996, the Watts Bar I nuclear power plant in Tennessee was the last U.S. nuclear power plant to go on line. It was, in fact, built based on pre-1990 technology. Since this last U.S. nuclear power plant was designed, there have been major advances in the field of ICHMI systems. Computer technology employed in other industries has advanced dramatically, and computing systems are now replaced every few years as they become functionally obsolete. Functional obsolescence occurs when newer, more functional technology replaces or supersedes an existing technology, even though an existing technology may well be in working order. Although ICHMI architectures are comprised of much of the same technology, they have not been updated nearly as often in the nuclear power industry. For example, some newer Personal Digital Assistants (PDAs) or handheld computers may, in fact, have more functionality than the 1996 computer control system at the Watts Bar I plant. This illustrates the need to transition and upgrade current nuclear power plant ICHMI technologies

  5. The great US nuclear gamble

    International Nuclear Information System (INIS)

    McCaughey, John.

    1997-01-01

    An unlikely combination of PECO, United States Energy company, and British Energy, with its nuclear plant operation expertise, are combining their interests as the AmerGen Energy Company. AmerGen is seeking to take over ailing US nuclear plants and boost their performance, to the benefit of consumers, and shareholders alike. Considerable financial and public face risks are at stake for the two companies, but despite its public unpopularity, nuclear power generates more than 20% of US electric power, and so the payback is also potentially, correspondingly high. This paper explores this history and likely success of this surprising cooperative venture. (UK)

  6. Internet Economics IV

    Science.gov (United States)

    2004-08-01

    edts.): Internet Economics IV Technical Report No. 2004-04, August 2004 Information Systems Laboratory IIS, Departement of Computer Science University of...level agreements (SLA), Information technology (IT), Internet address, Internet service provider 16. PRICE CODE 17. SECURITY CLASSIFICATION 18... technology and its economic impacts in the Internet world today. The second talk addresses the area of AAA protocol, summarizing authentication

  7. Uranium (IV) carboxylates - I

    Energy Technology Data Exchange (ETDEWEB)

    Satpathy, K C; Patnaik, A K [Sambalpur Univ. (India). Dept. of Chemistry

    1975-11-01

    A few uranium(IV) carboxylates with monochloro and trichloro acetic acid, glycine, malic, citric, adipic, o-toluic, anthranilic and salicylic acids have been prepared by photolytic methods. The I.R. spectra of these compounds are recorded and basing on the spectral data, structure of the compounds have been suggested.

  8. PLATO IV Accountancy Index.

    Science.gov (United States)

    Pondy, Dorothy, Comp.

    The catalog was compiled to assist instructors in planning community college and university curricula using the 48 computer-assisted accountancy lessons available on PLATO IV (Programmed Logic for Automatic Teaching Operation) for first semester accounting courses. It contains information on lesson access, lists of acceptable abbreviations for…

  9. A Post Closure Safety Assessment for Radioactive Wastes from Advanced nuclear fuel Cycle

    International Nuclear Information System (INIS)

    Kang, Chul Hyung; Hwang, Yong Soo

    2010-01-01

    KAERI has developed the KIEP-21 (Korean, Innovative, Environmentally Friendly, and Proliferation Resistant System for the 21st Century). It is an advanced nuclear fuel cycle option with a pyro-process and a GEN-IV SFR. A pyro-process consists of two distinctive processes, an electrolytic reduction process and an electro-refining and winning process. When the pyro-process is applied, it generates five streams of wastes. To compare pyro-process advantage over the direct disposal of Spent Nuclear Fuel (SNF), the PWR SNF of the 45,000 MWD burn-up has been assumed. A safety assessment model for pyro-process wastes and representative results are presented in this report

  10. Diffusion, Thermal Properties and Chemical Compatibilities of Select MAX Phases with Materials For Advanced Nuclear Systems

    Energy Technology Data Exchange (ETDEWEB)

    Barsoum, Michel [Drexel Univ., Philadelphia, PA (United States); Bentzel, Grady [Drexel Univ., Philadelphia, PA (United States); Tallman, Darin J. [Drexel Univ., Philadelphia, PA (United States); Sindelar, Robert [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Garcia-Diaz, Brenda [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Hoffman, Elizabeth [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-04-04

    The demands of Gen IV nuclear power plants for long service life under neutron irradiation at high temperature are severe. Advanced materials that would withstand high temperatures (up to 1000+ ºC) to high doses in a neutron field would be ideal for reactor internal structures and would add to the long service life and reliability of the reactors. The objective of this work is to investigate the chemical compatibility of select MAX with potential materials that are important for nuclear energy, as well as to measure the thermal transport properties as a function of neutron irradiation. The chemical counterparts chosen for this work are: pyrolytic carbon, SiC, U, Pd, FLiBe, Pb-Bi and Na, the latter 3 in the molten state. The thermal conductivities and heat capacities of non-irradiated MAX phases will be measured.

  11. Technical Integration of Nuclear Hydrogen Production Technology

    International Nuclear Information System (INIS)

    Lee, Ki Young; Chang, J. H.; Park, J. K.

    2007-06-01

    These works focus on the development of attainment indices for nuclear hydrogen key technologies, the analysis of the hydrogen production process and the performance estimation for hydrogen production system, and the assessment of the nuclear hydrogen production economy. To estimate the attainments of the key technologies in progress with the performance goals of GIF, itemized are the attainment indices based on SRP published in VHTR R and D steering committee of Gen-IV. For assessing the degree of attainments in comparison with the final goals of VHTR technologies in progress of researches, subdivided are the prerequisite items conformed to the NHDD concepts established in a preconceptual design in 2005. The codes for analyzing the hydrogen production economy are developed for calculating the unit production cost of nuclear hydrogen. We developed basic R and D quality management methodology to meet design technology of VHTR's needs. By putting it in practice, we derived some problems and solutions. We distributed R and D QAP and Q and D QAM to each teams and these are in operation. Computer simulations are performed for estimating the thermal efficiency for the electrodialysis component likely to adapting as one of the hydrogen production system in Korea and EED-SI process known as the key components of the hydrogen production systems. Using the commercial codes, the process diagrams and the spread-sheets were produced for the Bunsen reaction process, Sulphuric Acid dissolution process and HI dissolution process, respectively, which are the key components composing of the SI process

  12. Plutonium(IV) hydrous polymer chemistry

    International Nuclear Information System (INIS)

    Toth, L.M.; Dodson, K.E.

    1985-01-01

    The hydrous polymer chemistry of Pu(IV) in aqueous nitric acid solutions has been a subject of considerable interest for several years. This interest stems mainly from the fact that most nuclear fuel reprocessing schemes based on the Purex process can be hampered by the occurrence of polymer. As a result, an understanding and control of the parameters that affect polymer formation during reprocessing are studied. 2 refs

  13. Genética humana e sociedade

    OpenAIRE

    Rosa, Vivian Leyser da

    2000-01-01

    Tese (doutorado) - Universidade Federal de Santa Catarina, Centro de Ciências da Educação. Análise do campo de estudos sobre o entendimento público da ciência, distinguindo os modelos de deficit cognitivo e interativo, bem como suas implicações na esfera educacional. Estudo do panorama dos avanços atuais da genética humana, do ponto de vista científico, ético e social. Análise de aspectos relativos ao ensino de genética humana nos cursos de graduação da área da saúde, em nove Universidades...

  14. Database of thermophysical properties of liquid metal coolants for GEN-IV

    International Nuclear Information System (INIS)

    Sobolev, V.

    2011-01-01

    The report presents an Fe-Cr interatomic potential to model high-Cr ferritic alloys. The potential is fitted to thermodynamic and point-defect properties obtained from density functional theory (DFT) calculations and experiments. The developed potential is also benchmarked against other potentials available in literature. It shows particularly good agreement with the DFT obtained mixing enthalpy of the random alloy, the formation energy of intermetallics and experimental excess vibrational entropy and phase diagram. In addition, DFT calculated point-defect properties, both interstitial and substitutional, are well reproduced, as is the screw dislocation core structure. As a first validation of the potential, we study the precipitation hardening of Fe-Cr alloys via static simulations of the interaction between Cr precipitates and screw dislocations. It is concluded that the description of the dislocation core modification near a precipitate might have a significant influence on the interaction mechanisms observed in dynamic simulations.

  15. GEN IV: Carbide Fuel Elaboration for the 'Futurix Concepts' experiment

    Energy Technology Data Exchange (ETDEWEB)

    Vaudez, Stephane; Riglet-Martial, Chantal; Paret, Laurent; Abonneau, Eric [Commissariat a l' Energie Atomique (C.E.A.), Direction de l' Energie Nucleaire, Centre d' Etudes de Cadarache, 13108 Saint Paul lez Durance Cedex (France)

    2008-07-01

    In order to collect information on the behaviour of the future GFR (Gas Fast Reactor) fuel under fast neutron irradiation, an experimental irradiation program, called 'Futurix-concepts' has been launched at the CEA. The considered concept is a composite material made of a fissile fuel embedded in an inert ceramic matrix. Fissile fuel pellets are made of UPuN or UPuC while ceramics are SiC for the carbide fuel and TiN for the nitride fuel. This paper focuses on the description of the carbide composite fabrication. The UPuC pellets are manufactured using a metallurgical powder process. Fabrication and handling of the fuels are carried out in glove boxes under a nitrogen atmosphere. Carbide fuel is synthesized by carbo-thermic reduction under vacuum of a mixture of actinide oxide and graphitic carbon up to 1550 deg. C. After ball milling, the UPuC powder is pressed to create hexagonal or spherical compacts. They are then sintered up to 1750 deg. C in order to obtain a density of 85 % of the theoretical one. The sintered pellets are inserted into an inert and tight capsule of SiC. In order to control the gap between the fuel and the matrix precisely, the pellets are abraded. The inert matrix is then filled with the pellets and the whole system is sealed by a BRASiC{sup R} process at high temperature under a helium atmosphere. Fabrication of the sample to be irradiated was done in 2006 and the irradiation began in May 2007 in the Phenix reactor. This presentation will detail and discuss the results obtained during this fabrication phase. (authors)

  16. Control Rod Withdrawal Events Analyses for the Prototype Gen-IV SFR

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Chiwoong; Ha, Kwiseo; Jeong, Taekyeong; Jeong, Jaeho; Chang, Wonpyo; Lee, Seungwon; An, Sangjun; Lee, Kwilim [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2016-10-15

    To confirm the limiting condition, based on the maximum allowable reactivity insertion of 0.3 $, three cases from the end of cycle (EOC) are selected. In addition, assuming the failure of CRSS by earthquake, additional cases is defined at beginning of cycle (BOC). When the CRW occurs, the reactor can be protected by plant protection system (PPS). In this study, PPS mechanism is sequentially studied for all initiating events. For design basis accidents (DBA), the reactor can be scrammed by reactor protection system (RPS). The first and seconds RPS signals are checked during transients. When RPS is failed, so called as anticipated transient without scram (ATWS), the reactor will be protected by diverse protection system (DPS). In this study, in order to analyze various initiating events related control rod withdrawal, four kinds of operating condition is defined. TOP events are analyzed using MARS-LMR. The influence of various plant protection system such as RPS and DPS are investigated.

  17. Electromagnet Response Time Tests on Primary CRDM of a Prototype Gen-IV SFR

    International Nuclear Information System (INIS)

    Lee, Jae-Han; Koo, Gyeong-Hoi

    2015-01-01

    This paper identifies the electromagnetic response characteristics of the electromagnet of a primary control rod drive mechanism (CRDM) used for the reactor scram function. The test measures the electromagnet response time required to release an armature from a stator controlled by a loss of an electromagnetic force on an armature after shorting a power supply to an electromagnet coil. These tests are carried out while changing the electromagnet core material, an assist spring, and an armature holding current. The main factors influencing the test parameters on the response are found to be the armature holding current for holding the armature loads, and the material type of the electromagnet cores. The minimum response time is 0.13 seconds in the case of using SS410 material as an armature, while the S10C material as an armature has a response time of 0.21 seconds. Electromagnet response time characteristics from the test results will be evaluated by comparing the precise moving data of an electromagnet armature through the use of a high-speed camera and a potentiometer in the future

  18. Tritium Sequestration in Gen IV NGNP Gas Stream via Proton Conducting Ceramic Pumps

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Fanglin Frank [Univ. of South Carolina, Columbia, SC (United States); Adams, Thad M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Brinkman, Kyle [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Reifsnider, Kenneth [Univ. of South Carolina, Columbia, SC (United States)

    2011-09-30

    Several types of high-temperature proton conductors based on SrCeO3 and BaCeO3 have been systematically investigated in this project for tritium separation in NGNP applications. One obstacle for the field application is the chemical stability issues in the presence of steam and CO2 for these proton conductors. Several strategies to overcome such issues have been evaluated, including A site doping and B site co-doping method for perovskite-structured proton conductors. Novel zirconium-free proton conductors have also been developed with improved electrical conductivity and enhanced chemical stability. Novel catalytic materials for the proton-conducting separation membranes have been investigated. A tubular geometry proton-conducting membrane has been developed for the proton separation membranes. Total dose rate estimated from tritium decay (beta emission) under realistic membrane operating conditions, combined with electron irradiation experiments, indicates that proton ceramic materials possess the appropriate radiation stability for this application.

  19. Studies on woloszynskioid dinoflagellates IV: the genus Biecheleria gen. nov

    DEFF Research Database (Denmark)

    Moestrup, Øjvind; Lindberg, Karin; Daugbjerg, Niels

    2009-01-01

    in the dinoflagellates. Biecheleria also comprises the brackish water species Biecheleria baltica sp. nov. (presently identified as Woloszynskia halophila) and the marine species Biecheleria natalensis (syn. Gymnodinium natalense). Gymnodinium halophilum described in 1952 by B. Biecheler but apparently not subsequently...... refound, is transferred to Biecheleria. The Suessiaceae further includes the marine species Protodinium simplex, described by Lohmann in 1908 but shortly afterwards (1921) transferred to Gymnodinium by Kofoid and Swezy and subsequently known as Gymnodinium simplex. It only distantly related to Gymnodinium...

  20. Analyses of Design Extended Condition Events for the Prototype Gen-IV SFR

    International Nuclear Information System (INIS)

    Choi, Chiwoong; Jeong, Taekyung; Lee, Kwilim; Jeong, Jaeho; Ha, Kwiseok

    2015-01-01

    In this study, the sensitivity tests are conducted. In the case of the UTOP event, a sensitivity test for the reactivity insertion amount and rate were conducted. This analysis can give a requirement for margin of control rod stop system (CRSS). For example, the CRSS in the PRISM designed based on the 0.4 $ reactivity insertion, which is analyzed with safety analysis of UTOP event. Moreover, the sensitivity tests for weighting factor in the core radial expansion reactivity feedback model were also carried out for all ATWS events. Currently, the reactivity feedback model for the PGSFR is not validated yet. However, the reactivity feedback models in the MARS-LMR are validating with various plant-based data including EBR-II SHRT. The ATWS events for the PGSFR classified in the design extended condition including UTOP, ULOF, and ULOHS are analyzed with MARS-LMR. In this study, the sensitivity tests for reactivity insertion amount and rate in the UTOP event are conducted. The reactivity insertion amount is obviously an influential parameter. The reactivity insertion amount can give a requirement for design of the CRSS, therefore, this sensitivity result is very important to the CRSS. In addition, sensitivity tests for the weighting factor in the radial expansion reactivity model are carried out. The weighting factor for a grid plate, W GP , which means contribution of feedback in the grid plate is changed for all unprotected events. The grid plate expansion is governed by a core inlet temperature. As the W GP is increased, the power in the UTOP and the ULOF is increased, however, the power in the ULOHS is decreased. The higher power during transient means lower reactivity feedback and smaller expansion. Thus, the core outlet temperature rise is dominant in the UTOP and ULOF events, however, the core inlet temperature rise is dominant in the ULOHS. Therefore, the grid plate expansion in the ULOHS is predominant

  1. Optimized, Competitive Supercritical-CO2 Cycle GFR for Gen IV Service

    International Nuclear Information System (INIS)

    M.J. Driscoll; P. Hejzlar; G. Apostolakis

    2008-01-01

    An overall plant design was developed for a gas-cooled fast reactor employing a direct supercritical Brayton power conversion system. The most important findings were that (1) the concept could be capital-cost competitive, but startup fuel cycle costs are penalized by the low core power density, specified in large part to satisfy the goal of significant post-accident passive natural convection cooling; (2) active decay heat removal is preferable as the first line of defense, with passive performance in a backup role; (3) an innovative tube-in-duct fuel assembly, vented to the primary coolant, appears to be practicable; and (4) use of the S-Co2 GFR to support hydrogen production is a synergistic application, since sufficient energy can be recuperated from the product H2 and 02 to allow the electrolysis cell to run 250 C hotter than the reactor coolant, and the water boilers can be used for reactor decay heat removal. Increasing core power density is identified as the top priority for future work on GFRs of this type

  2. Tritium Sequestration in Gen IV NGNP Gas Stream via Proton Conducting Ceramic Pumps

    International Nuclear Information System (INIS)

    Chen, Franglin Frank; Adams, Thad M.; Brinkman, Kyle; Reifsnider, Kenneth

    2011-01-01

    Several perovskite structured proton conductors based on SrCeO 3 and BaCeO 3 have been investigated in the project. The solid solutions for SrCeO 3 and BaCeO 3 were first investigated. The morphological and electrical properties of Ba 1-x Sr x Ce 0.8 Y 0.2 O 3-δ with x varying from 0 to 1 prepared by a modified Pechini method were investigated as potential high temperature proton conductors. Dense microstructures were achieved for all the samples upon sintering at 1500ees)C for 5 h. The phase structure analysis indicated that perovskite phase was formed for 0≤x≤0.2, while for x larger than 0.5, impurity phases of Sr 2 CeO 4 and Y 2 O 3 appeared. The stability tests indicated that the resistance to boiling water for Ba 1-x Sr x Ce 0.8 Y 0.2 O 3-δ was between that of BaCe 0.8 Y 0.2 O 3-δ and SrCe 0.8 Y 0.2 O 3-δ Due to the tendency of the reaction with CO 2 for both BaCe 0.8 Y 0.2 O 3-δ and SrCe 0.8 Y 0.2 O 3-δ , it was not surprising that Ba 1-x Sr x Ce 0.8 Y 0.2 O 3-δ was also not stable in CO 2 containing atmospheres. The conductivity tests indicated that Ba 1-x Sr x Ce 0.8 Y 0.2 O 3-δ possessed the electrical conductivity between BaCe 0.8 Y 0.2 O 3-δ and SrCe 0.8 Y 0.2 O 3-δ . The conductivity decreased and the activation energy increased with the increase in Sr content in Ba 1-x Sr x Ce 0.8 Y 0.2 O 3-δ .

  3. Sensitivity Tests for the Unprotected Events of the Prototype Gen-IV SFR

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Chiwoong; Lee, Kwilim; Jeong, Jaeho; Yu, Jin; An, Sangjun; Lee, Seung Won; Chang, Wonpyo; Ha, Kwiseok [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2014-10-15

    Unprotected Transient Over Power, (UTOP), Unprotected Loss Of Flow (ULOF), and Unprotected Loss Of Heat Sink (ULOHS) are selected as ATWS events. Among these accidents, the ULOF event shows the lowest clad temperature. However, the ULOHS event showed the highest peak clad temperature, due to the positive CRDL/RV expansion reactivity feedback and insufficient DHRS capacity. In this study, the sensitivity tests are conducted. In the case of the UTOP event, a sensitivity test for the reactivity insertion amount and rate were conducted. This analysis can give a requirement for margin of control rod stop system (CRSS). Currently, the reactivity feedback model for the PGSFR is not validated yet. However, the reactivity feedback models in the MARS-LMR are validating with various plant-based data including EBR-II SHRT. The ATWS events for the PGSFR classified in the design extended condition including UTOP, ULOF, and ULOHS are analyzed with MARS-LMR. In this study, the sensitivity tests for reactivity insertion amount and rate in the UTOP event are conducted. The reactivity insertion amount is obviously an influential parameter. The reactivity insertion amount can give a requirement for design of the CRSS, therefore, this sensitivity result is very important to the CRSS. In addition, sensitivity tests for the weighting factor in the radial expansion reactivity model are carried out. The weighting factor for a grid plate, W{sub GP}, which means contribution of feedback in the grid plate is changed for all unprotected events. The grid plate expansion is governed by a core inlet temperature. As the W{sub GP} is increased, the power in the UTOP and the ULOF is increased, however, the power in the ULOHS is decreased. The higher power during transient means lower reactivity feedback and smaller expansion. Thus, the core outlet temperature rise is dominant in the UTOP and ULOF events, however, the core inlet temperature rise is dominant in the ULOHS. Therefore, the grid plate expansion in the ULOHS is predominant. These analysis results will give better understanding for the unprotected events and provide feedback to design for the PGSFR. In addition, the safety analyses for unprotected events: UTOP, ULOF, and ULOHS will be recalculated with CDF, which is a safety criteria in the near future.

  4. Enhanced Design Alternative IV

    International Nuclear Information System (INIS)

    Kramer, N.E.

    1999-01-01

    This report evaluates Enhanced Design Alternative (EDA) IV as part of the second phase of the License Application Design Selection (LADS) effort. The EDA IV concept was compared to the VA reference design using criteria from the Design Input Request for LADS Phase II EDA Evaluations (CRWMS M and O 1999b) and (CRWMS M and O 1999f). Briefly, the EDA IV concept arranges the waste packages close together in an emplacement configuration known as line load. Continuous pre-closure ventilation keeps the waste packages from exceeding their 350 C cladding and 200 C (4.3.6) drift wall temperature limits. This EDA concept keeps relatively high, uniform emplacement drift temperatures (post-closure) to drive water away from the repository and thus dry out the pillars between emplacement drifts. The waste package is shielded to permit human access to emplacement drifts and includes an integral filler inside the package to reduce the amount of water that can contact the waste form. Closure of the repository is desired 50 years after first waste is emplaced. Both backfill and drip shields will be emplaced at closure to improve post-closure performance. The EDA IV concept includes more defense-in-depth layers than the VA reference design because of its backfill, drip shield, waste package shielding, and integral filler features. These features contribute to the low dose-rate to the public achieved during the first 10,000 years of repository life as shown in Figure 3. Investigation of the EDA IV concept has led to the following general conclusions: (1) The total life cycle cost for EDA IV is about $21.7 billion which equates to a $11.3 billion net present value (both figures rounded up). (2) The incidence of design basis events for EDA IV is similar to the VA reference design. (3) The emplacement of the waste packages in drifts will be similar to the VA reference design. However, heavier equipment may be required because the shielded waste package will be heavier. (4) The heavier

  5. Targeted NextGen Capabilities for 2025

    Science.gov (United States)

    2011-11-01

    increased arrival capacity to single runways by reducing longitudinal wake separation standards for Instrument Flight Rules ( IFR ) operations under certain...b. ABSTRACT unclassified c. THIS PAGE unclassified Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std Z39-18 Targeted NextGen Capabilities...The examples cited are not intended to cover every aircraft and every flight. In some instances, the available capabilities for 2025 will not be

  6. Nuclear

    International Nuclear Information System (INIS)

    Anon.

    2000-01-01

    The first text deals with a new circular concerning the collect of the medicine radioactive wastes, containing radium. This campaign wants to incite people to let go their radioactive wastes (needles, tubes) in order to suppress any danger. The second text presents a decree of the 31 december 1999, relative to the limitations of noise and external risks resulting from the nuclear facilities exploitation: noise, atmospheric pollution, water pollution, wastes management and fire prevention. (A.L.B.)

  7. Technology readiness level (TRL) assessment of cladding alloys for advanced nuclear fuels

    International Nuclear Information System (INIS)

    Shepherd, Daniel

    2015-01-01

    Reliable fuel claddings are essential for the safe, sustainable and economic operation of nuclear stations. This paper presents a worldwide TRL assessment of advanced claddings for Gen III and IV reactors following an extensive literature review. Claddings include austenitic, ferritic/martensitic (F/M), reduced activation (RA) and oxide dispersion strengthened (ODS) steels as well as advanced iron-based alloys (Kanthal alloys). Also assessed are alloys of zirconium, nickel (including Hastelloy R ), titanium, chromium, vanadium and refractory metals (Nb, Mo, Ta and W). Comparison is made with Cf/C and SiCf/SiC composites, MAX phase ceramics, cermets and TRISO fuel particle coatings. The results show in general that the higher the maximum operating temperature of the cladding, the lower the TRL. Advanced claddings were found to have lower TRLs than the corresponding fuel materials, and therefore may be the limiting factor in the deployment of advanced fuels and even possibly the entire reactor in the case of Gen IV. (authors)

  8. A sputnik IV saga

    Science.gov (United States)

    Lundquist, Charles A.

    2009-12-01

    The Sputnik IV launch occurred on May 15, 1960. On May 19, an attempt to deorbit a 'space cabin' failed and the cabin went into a higher orbit. The orbit of the cabin was monitored and Moonwatch volunteer satellite tracking teams were alerted to watch for the vehicle demise. On September 5, 1962, several team members from Milwaukee, Wisconsin made observations starting at 4:49 a.m. of a fireball following the predicted orbit of Sputnik IV. Requests went out to report any objects found under the fireball path. An early morning police patrol in Manitowoc had noticed a metal object on a street and had moved it to the curb. Later the officers recovered the object and had it dropped off at the Milwaukee Journal. The Moonwarch team got the object and reported the situation to Moonwatch Headquarters at the Smithsonian Astrophysical Observatory. A team member flew to Cambridge with the object. It was a solid, 9.49 kg piece of steel with a slag-like layer attached to it. Subsequent analyses showed that it contained radioactive nuclei produced by cosmic ray exposure in space. The scientists at the Observatory quickly recognized that measurements of its induced radioactivity could serve as a calibration for similar measurements of recently fallen nickel-iron meteorites. Concurrently, the Observatory directorate informed government agencies that a fragment from Sputnik IV had been recovered. Coincidently, a debate in the UN Committee on Peaceful Uses of Outer Space involved the issue of liability for damage caused by falling satellite fragments. On September 12, the Observatory delivered the bulk of the fragment to the US Delegation to the UN. Two days later, the fragment was used by US Ambassador Francis Plimpton as an exhibit that the time had come to agree on liability for damage from satellite debris. He offered the Sputnik IV fragment to USSR Ambassador P.D. Morozov, who refused the offer. On October 23, Drs. Alla Massevitch and E.K. Federov of the USSR visited the

  9. Solubility study of Tc(IV) oxides

    International Nuclear Information System (INIS)

    Liu, D.J.; Fan, X.H.

    2005-01-01

    The deep geological disposal of the high level radioactive wastes is expected to be a safer disposal method in most countries. The long-lived fission product 99 Tc is present in large quantities in nuclear wastes and its chemical behavior in aqueous solution is of considerable interest. Under oxidizing conditions technetium exists as the anionic species TcO 4 - whereas under the reducing conditions, expected to exist in a deep geological repository, it is generally predicted that technetium will be present as TcO 2 ·nH 2 O. Hence, the mobility of Tc(IV) in reducing groundwater may be limited by the solubility of TcO 2 ·nH 2 O under these conditions. Due to this fact it is important to investigate the solubility of TcO 2 ·nH 2 O. The solubility determines the release of radionuclides from waste form and is used as a source term in radionuclide migration analysis in performance assessment of radioactive waste repository. Technetium oxide was prepared by reduction of a technetate solution with Sn 2 + . The solubility of Tc(IV) oxide has been determined in simulated groundwater and redistilled water under aerobic and anaerobic conditions. The effects of pH and CO 3 2- concentration of solution on solubility of Tc(IV) oxide were studied. The concentration of total technetium and Tc(IV) species in the solutions were periodically determined by separating the oxidized and reduced technetium species using a solvent extraction procedure and counting the beta activity of the 99 Tc with a liquid scintillation counter. The experimental results show that the rate of oxidation of Tc(IV) in simulated groundwater and redistilled water is about (1.49-1.86) x 10 -9 mol/(L·d) under aerobic conditions, but Tc(IV) in simulated groundwater and redistilled water is not oxidized under anaerobic conditions. Under aerobic or anaerobic conditions the solubility of Tc(IV) oxide in simulated groundwater and redistilled water is equal on the whole after centrifugation or ultrafiltration. The

  10. Solubility of Tc(IV) oxides

    International Nuclear Information System (INIS)

    Liu, D.J.; Fan, X.H.

    2005-01-01

    Full text of publication follows: The deep geological disposal of the high level radioactive wastes is expected to be a safer disposal method in most countries. The long-lived fission product 99 Tc is present in large quantities in nuclear wastes and its chemical behavior in aqueous solution is of considerable interest. Under the reducing conditions, expected to exist in a deep geological repository, it is generally predicted that technetium will be present as TcO 2 .nH 2 O. The solubility of Tc(IV) is used as a source term in performance assessment of radioactive waste repository. Technetium oxide was prepared by reduction of a technetate solution with Sn 2+ . The solubility of Tc(IV) oxide has been determined in simulated groundwater and re-distilled water under aerobic and anaerobic conditions. The effects of pH and CO 3 2- concentration of solution on solubility of Tc(IV) oxide were studied. The concentration of total technetium and Tc(IV) species in the solutions were periodically determined by separating the oxidized and reduced technetium species using a solvent extraction procedure and counting the beta activity of the 99 Tc with a liquid scintillation counter. The experimental results show that the rate of oxidation of Tc(IV) in simulated groundwater and re-distilled water is about (1.49∼1.86) x 10 -9 mol/(L.d) under aerobic conditions, but Tc(IV) in simulated groundwater and re-distilled water is not oxidized under anaerobic conditions. Under aerobic or anaerobic conditions the solubility of Tc(IV) oxide in simulated groundwater and re-distilled water is equal on the whole after centrifugation or ultrafiltration. The solubility of Tc(IV) oxide decreases with the increase of pH at pH 10 and is pH independent in the range 2 -8 to 10 -9 mol/L at 2 3 2- concentration. These data could be used to estimate the Tc(IV) solubility for cases where solubility limits transport of technetium in reducing environments of high-level waste repositories. (authors)

  11. Recommendations and Requirements for GenCade Simluations

    Science.gov (United States)

    2014-08-01

    will report whether or not GenCade is enabled. If GenCade is disabled , the user will need a new license that includes GenCade...any depth but usually are not deeper than the seaward edge of the surf - zone. In the same way that some shorelines are less desirable for use in...Conference, 1919–1937. ASCE. Wang, P., N. C. Kraus, and R. A. Davis. 1998. Total rate of longshore sediment transport in the surf zone: Field

  12. O impacto da genética na asma infantil

    OpenAIRE

    Pinto,Leonardo A.; Stein,Renato T.; Kabesch,Michael

    2008-01-01

    OBJETIVO: Apresentar os resultados dos estudos mais importantes e recentes sobre a genética da asma. Estes dados devem auxiliar os clínicos gerais a compreender o impacto da genética sobre este distúrbio complexo e como os genes e polimorfismos influenciam a asma e a atopia. FONTES DOS DADOS: Os dados foram coletados do banco de dados MEDLINE. Os estudos de associação genética foram selecionados do Genetic Association Database, um repositório de estudos de associação genética de doenças e dis...

  13. Aconselhamento genético Genetic counseling

    Directory of Open Access Journals (Sweden)

    João Monteiro de Pina-Neto

    2008-08-01

    Full Text Available OBJETIVO: Esta revisão sobre aconselhamento genético (AG teve o objetivo de mostrar os conceitos atuais e os princípios filosóficos e éticos aceitos na grande maioria dos países e recomendados pela Organização Mundial da Saúde, as fases do processo, seus resultados e o impacto psicológico de uma doença genética em uma família. FONTES DOS DADOS: Os conceitos apresentados são baseados em uma síntese histórica da literatura sobre AG desde a década de 1930 até o momento atual, sendo que os artigos citados representam os principais trabalhos publicados e que hoje fundamentam a teoria e a prática do AG. SÍNTESE DOS DADOS: O AG modernamente é definido como um processo de comunicação que trata dos problemas humanos relacionados à ocorrência de uma doença genética em uma família. É fundamental que os profissionais da saúde conheçam os aspectos psicológicos desencadeados pela doença genética e como estes aspectos podem ser manejados. Vivemos ainda na genética humana e médica uma fase de predomínio dos aspectos técnicos e científicos e de pouca ênfase no estudo das reações emocionais e dos processos de adaptação das pessoas a estas doenças, o que leva ao baixo entendimento dos clientes sobre os fatos ocorridos, com conseqüências negativas sobre a vida familiar e para a sociedade. CONCLUSÕES: Conclui-se pela necessidade de que as famílias com doenças genéticas sejam encaminhadas para AG e que os profissionais desta área invistam mais na humanização do atendimento, desenvolvendo mais as técnicas do AG psicológico não-diretivo.OBJECTIVE: The objective of this review of genetic counseling (GC is to describe the current concepts and philosophical and ethical principles accepted by the great majority of countries and recommended by the World Health Organization, the stages of the process, its results and the psychological impact that a genetic disease has on a family. SOURCES: The concepts presented are

  14. No one can play snooker that fast. SCK•CEN performs computer simulations of nuclear fuel behaviour

    International Nuclear Information System (INIS)

    2014-01-01

    The article discusses the project F-Bridge, which is funded under the seventh European framework programme. The objective of F-Bridge apply knowledge gained from fundamental science to to the development of Gen-IV fuels. The ultimate goal is to set up an international exchange platform for the integration and the coordination of nuclear fuel research. As part of the F-Bridge project, the Belgian Nuclear Research Center SCK-CEN collaborates with other institutes in Europe in a work package on multi-scale modelling. The main contribution of SCK-CEN focuses on atomic-scale computer simulations. The employed techniques are based on empirical force fields and describe atomic interactions using simple parameters and analytical formulas. Based on Newton’s theory, the evolution of a series of atoms and their interaction over a given time period can be predicted.

  15. TidGen Power System Commercialization Project

    Energy Technology Data Exchange (ETDEWEB)

    Sauer, Christopher R. [President & CEO; McEntee, Jarlath [VP Engineering & CTO

    2013-12-30

    ORPC Maine, LLC, a wholly-owned subsidiary of Ocean Renewable Power Company, LLC (collectively ORPC), submits this Final Technical Report for the TidGen® Power System Commercialization Project (Project), partially funded by the U.S. Department of Energy (DE-EE0003647). The Project was built and operated in compliance with the Federal Energy Regulatory Commission (FERC) pilot project license (P-12711) and other permits and approvals needed for the Project. This report documents the methodologies, activities and results of the various phases of the Project, including design, engineering, procurement, assembly, installation, operation, licensing, environmental monitoring, retrieval, maintenance and repair. The Project represents a significant achievement for the renewable energy portfolio of the U.S. in general, and for the U.S. marine hydrokinetic (MHK) industry in particular. The stated Project goal was to advance, demonstrate and accelerate deployment and commercialization of ORPC’s tidal-current based hydrokinetic power generation system, including the energy extraction and conversion technology, associated power electronics, and interconnection equipment capable of reliably delivering electricity to the domestic power grid. ORPC achieved this goal by designing, building and operating the TidGen® Power System in 2012 and becoming the first federally licensed hydrokinetic tidal energy project to deliver electricity to a power grid under a power purchase agreement in North America. Located in Cobscook Bay between Eastport and Lubec, Maine, the TidGen® Power System was connected to the Bangor Hydro Electric utility grid at an on-shore station in North Lubec on September 13, 2012. ORPC obtained a FERC pilot project license for the Project on February 12, 2012 and the first Maine Department of Environmental Protection General Permit issued for a tidal energy project on January 31, 2012. In addition, ORPC entered into a 20-year agreement with Bangor Hydro Electric

  16. Model for nuclear proliferation resistance analysis using decision making tools

    International Nuclear Information System (INIS)

    Ko, Won Il; Kim, Ho Dong; Yang, Myung Seung

    2003-06-01

    The nuclear proliferation risks of nuclear fuel cycles is being considered as one of the most important factors in assessing advanced and innovative nuclear systems in GEN IV and INPRO program. They have been trying to find out an appropriate and reasonable method to evaluate quantitatively several nuclear energy system alternatives. Any reasonable methodology for integrated analysis of the proliferation resistance, however, has not yet been come out at this time. In this study, several decision making methods, which have been used in the situation of multiple objectives, are described in order to see if those can be appropriately used for proliferation resistance evaluation. Especially, the AHP model for quantitatively evaluating proliferation resistance is dealt with in more detail. The theoretical principle of the method and some examples for the proliferation resistance problem are described. For more efficient applications, a simple computer program for the AHP model is developed, and the usage of the program is introduced here in detail. We hope that the program developed in this study could be useful for quantitative analysis of the proliferation resistance involving multiple conflict criteria

  17. Model for nuclear proliferation resistance analysis using decision making tools

    Energy Technology Data Exchange (ETDEWEB)

    Ko, Won Il; Kim, Ho Dong; Yang, Myung Seung

    2003-06-01

    The nuclear proliferation risks of nuclear fuel cycles is being considered as one of the most important factors in assessing advanced and innovative nuclear systems in GEN IV and INPRO program. They have been trying to find out an appropriate and reasonable method to evaluate quantitatively several nuclear energy system alternatives. Any reasonable methodology for integrated analysis of the proliferation resistance, however, has not yet been come out at this time. In this study, several decision making methods, which have been used in the situation of multiple objectives, are described in order to see if those can be appropriately used for proliferation resistance evaluation. Especially, the AHP model for quantitatively evaluating proliferation resistance is dealt with in more detail. The theoretical principle of the method and some examples for the proliferation resistance problem are described. For more efficient applications, a simple computer program for the AHP model is developed, and the usage of the program is introduced here in detail. We hope that the program developed in this study could be useful for quantitative analysis of the proliferation resistance involving multiple conflict criteria.

  18. Lessons learned from Gen II NPP staffing approaches applicable to new reactors - 15003

    International Nuclear Information System (INIS)

    Goodnight, C.

    2015-01-01

    This paper discusses lessons learned from the operation of the Gen II fleet of existing nuclear power plants (NPPs), in terms of staffing, that can be applied to the final design, deployment, and operation of new reactor designs. The most significant of these lessons is the need to appropriately staff the facility, having the right number of people with the required skills and experience. This begs the question of how to identify those personnel requirements. For NPPs, there are five key factors that ultimately will determine the effectiveness and costs of operating nuclear power plants (NPPs): 1) The Nuclear Steam Supply System (NSSS) and the layout of the plant site; 2) The processes which the operating organization applies; 3) The organizational structure of the operating organization; 4) The organizational culture of the operating organization, and 5) The regulatory framework under which the licensee must operate. In summary, this paper identifies opportunities to minimize staffing and costs learned from Gen II NPPs that may be applicable for new nuclear plants. (author)

  19. Statements on Energy from Nuclear Fusion

    International Nuclear Information System (INIS)

    The Energy Committee of the Royal Swedish Academy of Sciences

    2006-07-01

    The Royal Swedish Academy of Sciences (KVA) is an independent non-governmental organization, with expertise in most of the sciences as well as in the economical, social and humanistic fields. The KVA has appointed an Energy Committee that will summarize scientific knowledge on supply and use of energy over the coming fifty years. The Energy Committee has selected a number of subjects to be studied in some depth, one of these being nuclear energy from the fission process. The Energy Committee's key issues concerning nuclear energy: We have identified six key issues which require very careful analysis during the coming years. Safety remains a key issue. It is one of the major activities of OECD's Nuclear Energy Agency. 40 years of multilateral cooperation has led to improvements in the analysis and management of accidents and in the assessment of safety margins in the fuel cycle. In particular, attention is focused on ageing and structural integrity as the lifetime of reactors is extended to up to 60 years. The new Gen III reactors have improved safety features such as double containment, better separation of critical safety systems and improved possibilities to handle steam explosions and core meltdown. The Gen IV reactors will be designed with a goal to further improve safety features. Handling of the nuclear waste: Today, in most light water reactors, the fuel is used once only ('once through') and then sent directly to repositories. After some cooling time, the waste will be buried in underground repositories. Another important aspect is that a final decision for waste disposal is of great importance to the public's acceptance of any new nuclear ventures. The waste handling in future reactors is an important item for research and its solution will also influence how the waste from current reactors is managed. Non-proliferation: With increased use of nuclear energy, more countries may build up facilities for the whole fuel cycle, thus also, at least theoretically

  20. Nuclear reactor development in Korea: It's history and status

    International Nuclear Information System (INIS)

    Cheong, J.; Kim, I.; Kim, D. S.

    2007-01-01

    Currently in Korea, 20 nuclear plants are in operation, generating some 18,000 MWe of electricity which is about 30% of the national electricity supply. Further 8 reactors, including innovative light water reactors developed with 30 years' experience in construction and operation with continuous technology development, are either under construction or being planned. Executing an energetic program of nuclear development, Korea is now the world's sixth-ranked nuclear nation. In this paper, at first, history of the nuclear reactor development in Korea will be discussed including technology self-reliance efforts of the nuclear industry, and future plan and prospects will also be presented. Secondly, the OPR1000 which is a Korean standard plant will be introduced in detail including its characteristics, design approach and features. Six OPR1000's are being operated with outstanding performance and 4 more units are under construction. The APR1400, an upgraded reactor of the OPR1000 in capacity and design, has been developed as a next generation reactor, and the contracts were signed for the first 2 units' construction in August 2006. Its development process and design features will be described. Finally, Korea's efforts for future nuclear power generation will be introduced. For future reliable energy supply, Korea has been actively participating in international cooperation such as Gen IV International Forum. In summary, this paper will introduce the history and status of the Korean nuclear reactor development with its past, present and future, which might be helpful to understand the Korean nuclear industry and find a way for international cooperation especially with European countries

  1. Generation IV international forum 2002 - remarks

    International Nuclear Information System (INIS)

    Abraham, S.

    2002-01-01

    Analyses and forecasts underscore the important role of nuclear power in energy supply in the 21st century. Important aspects in this respect are the conservation of fossil resources, the protection of the world's climate, and the continuity of supply. Present 1st and 2nd generation nuclear power plants ensure an economical and technically mature electricity supply. Advanced systems offering, e.g., higher efficiency of fuel utilization, simplified systems technology, and advanced safety characteristics, can make available additional benefits in using nuclear power. Upon an initiative of the U.S. Department of Energy (DOE), ten countries combine their efforts in developing such reactor concepts in the Generation IV International Forum (GIF). Argentina, Brazil, Canada, France, Japan, South Africa, South Korea, Switzerland, the United Kingdom, and the United States pursue the common objective in GIF to identify suitable nuclear power systems and promote their development up to the envisaged readiness for construction in 2030. Besides technical and economic questions of nuclear power generation, also other aspects must be considered with a view to the future use of nuclear power. The particularly relevant issues, such as the management of radioactive waste, the intensification of research and development, and international cooperation, have been taken up by the Bush administration at an early point in time and have been, or will be, incorporated in practical solutions, as in the case of the Yucca Mountain repository project. (orig.)

  2. Diaquatetrabromidotin(IV trihydrate

    Directory of Open Access Journals (Sweden)

    Fei Ye

    2012-09-01

    Full Text Available The title compound, [SnBr4(H2O2]·3H2O, forms large colourless crystals in originally sealed samples of tin tetrabromide. It constitutes the first structurally characterized hydrate of SnBr4 and is isostructural with the corresponding hydrate of SnCl4. It is composed of SnIV atoms octahedrally coordinated by four Br atoms and two cis-related water molecules. The octahedra exhibit site symmetry 2. They are arranged into columns along [001] via medium–strong O—H...O hydrogen bonds involving the two lattice water molecules (one situated on a twofold rotation axis while the chains are interconnected via longer O—H...Br hydrogen bonds, forming a three-dimensional network.

  3. Cyclopentadienyluranium(IV) acetylacetonates

    International Nuclear Information System (INIS)

    Bagnall, K.W.; Edwards, J.; Rickard, C.E.F.; Tempest, A.C.

    1979-01-01

    Cyclopentadienyluranium(IV) acetylacetonate complexes, (eta 5 C 5 H 5 )UClsub(3-x)(acac)sub(x), where x = 1 or 2, and the corresponding bis triphenylphosphine oxide (tppo) complexes have been prepared. The bis cyclopentadienyl complexes, (eta 5 C 5 H 5 ) 2 U(acac) 2 and (eta 5 C 5 H 5 ) 2 UCl(acac)(tppo) 2 have also been prepared and are stable with respect to disproportionation, whereas (eta 5 C 5 H 5 ) 2 UCl(acac) is not. The IR and UV/visible spectra of the complexes are reported, together with some additional information on the UCl 2 (acac) 2 thf and -tppo systems. (author)

  4. Towards an International Culture: Gen Y Students and SNS?

    Science.gov (United States)

    Lichy, Jessica

    2012-01-01

    This article reports the findings of a small-scale investigation into the Internet user behaviour of generation Y (Gen Y) students, with particular reference to social networking sites. The study adds to the literature on cross-cultural Internet user behaviour with specific reference to Gen Y and social networking. It compares how a cohort of…

  5. Fretting wear characteristic tests of X2-GEN midgrid for SMART under a FIV rod trace

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Young Ho; Lee, Kang Hee; Kim, Jae Yong; Kim, Hyung Kyu [KAERI, Daejeon (Korea, Republic of)

    2011-12-15

    The KEPCO Nuclear Fuel Co. requested the fretting wear characteristic tests of a X2-GEN midgrid under a FIV rod trace at room temperature air. The following results were obtained for the fretting wear test. {center_dot} Fretting wear tests under a FIV rod trace Based on the result of the fretting wear tests of the X2-GEN and 17ACE7 1x1 mid-grid under a FIV rod trace, X2-GEN mid-grid showed a slightly severe wear volume rather than 17ACE7 spring. But, maximum wear depth shows an opposite behavior. This is due to spring shape effect. The fretting wear mechanisms at each mid-grid were influenced by each spring shape, that are depended on the different impacting behavior under a FIV rod motion. Up to 5x105 cycles, wear characteristics of each mid-grid shows a relatively similar wear rate. Consequently, it is necessary to further study for examining exact fretting wear behavior under a FIV rod tra

  6. Caracterização genético-clínica de pacientes com fenilcetonúria no Estado de Alagoas = Genetic and clinical characterization of patients with phenylketonuria in Alagoas state, Brazil

    Directory of Open Access Journals (Sweden)

    Santos, Emerson Santana

    2012-01-01

    Conclusões: O genótipo V388M/IVS10nt11G>A foi o mais prevalente. Trinta por cento dos pacientes foram sintomáticos, provavelmente pela natureza das mutações, não adesão ao tratamento, tratamento inadequado e/ou diagnóstico tardio

  7. Variabilidad genética de Plasmodium falciparum en pacientes con malaria grave y malaria no complicada en Iquitos - Perú

    Directory of Open Access Journals (Sweden)

    Gisely Hijar G

    2002-07-01

    Full Text Available Objetivo: Determinar la diversidad genética del gen que codifica la proteína rica en glutamato (GLURP de Plasmodium falciparum en pacientes con malaria complicada y no complicada circulante en un área del departamento de Loreto, distrito de Maynas. Materiales y métodos: La diversidad genética fue analizada usando reacción en cadena de la polimerasa (PCR en 30 muestras sanguíneas de pacientes con malaria no complicada (MNC y 46 con malaria grave complicada (MGC. Resultados: Ocho genotipos fueron detectados en pacientes con MNC (Genotipo I,II,III, IV,V, VI,VII y VIII y cuatro genotipos en los pacientes con MGC (Genotipo V,VI,VII,VIII. Asimismo, en 50% de las muestras con MNC fueron detectadas infecciones múltiples, a diferencia de las muestras de MGC en donde no se detectó infecciones múltiples. Conclusión: Existe una diversidad genética en esta región del gen GLURP de P. falciparum, para esa época (marzo 1998 - abril 1999 y esa área del país. En tal sentido, nuestros resultados podrían servir de base para llevar a cabo estudios epidemiológicos posteriores, ya que permitiría conocer la distribución de las cepas circulantes en nuestro país.

  8. Factors Influencing Retention of Gen Y and Non-Gen Y Teachers Working at International Schools in Asia

    Science.gov (United States)

    Fong, Hoi Wah Benny

    2018-01-01

    Quantitative studies on international-school teacher retention are few, especially studies that differentiate between Gen Y and non-Gen Y teachers. This article reports on the findings of a study that examined the relationship of job satisfaction factors to the likelihood of contract renewal by international-school teachers. Results from the study…

  9. Heat and power from MicroGen

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1999-10-01

    This paper reports on the design of a domestic gas-fired cogeneration system developed to replace the central heating boiler. Technical details of the MicroGen demonstration unit are given, and the use of a Linear Free Piston Stirling Engine as the prime mover, and the results of modelling studies of energy demand indicating cost savings compared to conventional boilers are discussed. The enhancement of the benefits of micro-cogeneration through use of thermal and power storage and energy demand management, and the impact of micro-cogeneration on energy use in the home are considered. The UK and European Commission's targets for increased cogeneration capacity are noted.

  10. NextGen Future Safety Assessment Game

    Science.gov (United States)

    Ancel, Ersin; Gheorghe, Adrian; Jones, Sharon Monica

    2011-01-01

    The successful implementation of the next generation infrastructure systems requires solid understanding of their technical, social, political and economic aspects along with their interactions. The lack of historical data that relate to the long-term planning of complex systems introduces unique challenges for decision makers and involved stakeholders which in turn result in unsustainable systems. Also, the need to understand the infrastructure at the societal level and capture the interaction between multiple stakeholders becomes important. This paper proposes a methodology in order to develop a holistic approach aiming to provide an alternative subject-matter expert (SME) elicitation and data collection method for future sociotechnical systems. The methodology is adapted to Next Generation Air Transportation System (NextGen) decision making environment in order to demonstrate the benefits of this holistic approach.

  11. Congenital bilateral neuroblastoma (stage IV-S): case report

    International Nuclear Information System (INIS)

    Lee, Jeong Hee; Lee, Hee Jung; Woo, Seong Ku; Lee, Sang Rak; Kim, Heung Sik

    2002-01-01

    Congenital neonatal neuroblastoma is not uncommon but bilateral adrenal neuroblastoma is rare, accounting for about ten percent of neuroblastomas in children. We report the US the MR findings of a stage IV-S congenital bilateral neuroblastoma occurring in a one-day-old neonate

  12. The GenDev Curriculum Development Workshop.

    Science.gov (United States)

    D'cunha, J

    1997-01-01

    This article describes the second Curriculum Development Workshop held in May 1997 at the Asian Institute of Technology (AIT) in Bangkok, Thailand. The workshop aimed to review critically and restructure the Gender and Development Studies (GenDev) curriculum and to assess AIT's role in training gender experts for the region. Participants included 22 people from 16 countries in Asia, Europe, and the US who were teaching graduate students about gender issues and who were activists with nongovernmental organizations working on gender issues. It was determined that the following were required courses: Culture, Knowledge and Gender Relations; Gender, Technology, and Development; Principles of Gender Research and Methodology in Science and Technology; and Gender Analysis and Field Methods. Other suggested core courses included: Gender and Natural Resource Management; Enterprise Management, Technology, and Gender; Gender and Agrarian Reform; Urbanization: A Gender Perspective; Gender-Responsive Development Planning; and Gender and Economic Change: Past and Present Concerns. Participants distinguished between GenDev courses offered to anyone attending AIT and training courses designed to produce gender experts in the region. The aim of training courses for AIT graduate students was to sensitize potential managers, technologists, and others on gender issues and to create awareness of the importance of including gender perspectives within decision-making, policy formation, and implementation. Training courses to produce gender experts should be directed to those with a prior background in gender studies and include gender analysis in field methods. Participants agreed that there should be an independent and autonomous field of gender and development studies. Participants made six recommendations for such a field of study.

  13. GEN-27, a Newly Synthetic Isoflavonoid, Inhibits the Proliferation of Colon Cancer Cells in Inflammation Microenvironment by Suppressing NF-κB Pathway

    Directory of Open Access Journals (Sweden)

    Yajing Wang

    2016-01-01

    Full Text Available Nonresolving inflammation is one of the consistent features of the tumor microenvironment in the intestine and plays a critical role in the initiation and development of colon cancer. Here we reported the inhibitory effects of GEN-27, a new derivative of genistein, on the inflammation-related colon cancer cell proliferation and delineated the mechanism of its action. The results indicated that GEN-27 inhibited the proliferation of human colon tumor HCT116 cells stimulated by culture supernatants of LPS-induced human monocytes THP-1 cells and significantly decreased LPS-induced secretion of proinflammatory cytokines interleukin-6 and interleukin-1β in THP-1 cells. The HCT116 cell proliferation elicited by THP-1-conditioned medium could be blocked by the interleukin-1 receptor antagonist (IL-1RA. Further mechanistic study revealed that GEN-27 remarkably inhibited the nuclear translocation of NF-κB and phosphorylation of IκB and IKKα/β in both HCT116 and THP-1 cells. In addition, GEN-27 markedly suppressed the HCT116 cell proliferation stimulated by IL-1β treatment, which was dependent on the inhibition of NF-κB/p65 nuclear localization, as verified by p65 overexpression and BAY 11-7082, an NF-κB inhibitor. Taken together, our findings established that GEN-27 modulated NF-κB signaling pathway involved in inflammation-induced cancer cells proliferation and therefore could be a potential chemopreventive agent against inflammation-associated colon cancer.

  14. GEN-27, a Newly Synthetic Isoflavonoid, Inhibits the Proliferation of Colon Cancer Cells in Inflammation Microenvironment by Suppressing NF-κB Pathway.

    Science.gov (United States)

    Wang, Yajing; Lu, Ping; Zhang, Weifeng; Du, Qianming; Tang, Jingjing; Wang, Hong; Lu, Jinrong; Hu, Rong

    2016-01-01

    Nonresolving inflammation is one of the consistent features of the tumor microenvironment in the intestine and plays a critical role in the initiation and development of colon cancer. Here we reported the inhibitory effects of GEN-27, a new derivative of genistein, on the inflammation-related colon cancer cell proliferation and delineated the mechanism of its action. The results indicated that GEN-27 inhibited the proliferation of human colon tumor HCT116 cells stimulated by culture supernatants of LPS-induced human monocytes THP-1 cells and significantly decreased LPS-induced secretion of proinflammatory cytokines interleukin-6 and interleukin-1β in THP-1 cells. The HCT116 cell proliferation elicited by THP-1-conditioned medium could be blocked by the interleukin-1 receptor antagonist (IL-1RA). Further mechanistic study revealed that GEN-27 remarkably inhibited the nuclear translocation of NF-κB and phosphorylation of IκB and IKKα/β in both HCT116 and THP-1 cells. In addition, GEN-27 markedly suppressed the HCT116 cell proliferation stimulated by IL-1β treatment, which was dependent on the inhibition of NF-κB/p65 nuclear localization, as verified by p65 overexpression and BAY 11-7082, an NF-κB inhibitor. Taken together, our findings established that GEN-27 modulated NF-κB signaling pathway involved in inflammation-induced cancer cells proliferation and therefore could be a potential chemopreventive agent against inflammation-associated colon cancer.

  15. Review Paper: Review of Instrumentation for Irradiation Testing of Nuclear Fuels and Materials

    International Nuclear Information System (INIS)

    Kim, Bong Goo; Rempe, Joy L.; Villard, Jean-Francois; Solstadd, Steinar

    2011-01-01

    Over 50 years of nuclear fuels and materials irradiation testing has led to many countries developing significant improvements in instrumentation to monitor physical parameters and to control the test conditions in material test reactors (MTRs). Recently, there is increased interest to irradiate new materials and reactor fuels for advanced pressurized water reactors and Gen-IV reactor systems, such as sodium-cooled fast reactors, very high temperature reactors, supercritical water-cooled reactors, and gas-cooled fast reactors. This review paper documents the current state of instrumentation technologies in MTRs in the world and summarizes ongoing research efforts to deploy new sensors. As described in this paper, a wide range of sensors is available to measure key parameters of interest during fuels and materials irradiations in MTRs. Ongoing development efforts focus on providing MTR users a wider range of parameter measurements with smaller, higher accuracy sensors.

  16. Metode Transfer Asam Nukleat sebagai Dasar Terapi Gen

    Directory of Open Access Journals (Sweden)

    Novi Silvia Hardiany

    2017-01-01

    Full Text Available Kemajuan ilmu biologi molekuler memberikan manfaat dalam bidang kedokteran untuk mengembangkanterapi gen. Tujuan terapi gen adalah untuk memperbaiki kerusakan gen atau mengganti gen yang rusakdengan gen yang normal. Pemindahan gen dilakukan dengan teknik transfeksi. Transfeksi merupakanproses pemindahan asam nukleat baik menggunakan vektor virus (transduksi atau menggunakan metodenonviral yaitu zat kimia, lipid dan metode fisik. Vektor virus yang digunakan pada transduksi adalahretrovirus, adenovirus, adeno-associated virus (AAV dan herpes simplex virus (HSV. Keberhasilantransfeksi ditentukan oleh berbagai faktor yang dapat dapat dinilai dengan menggunakan reporter sepertigreen fluorescence protein (GFP. Kata Kunci: terapi gen, transfeksi non viral, transduksi, vektor virus   Methods of Nucleic Acid Transfer as Basic Gene Therapy Abstract The advancement of molecular biology provides benefit in the field of medicine to develop genetherapy. The aim of gene therapy is to repair the genetic damage or to replace damaged gene with thenormal gene. Delivery of gene is carried out by transfection technique, a technique to transfer nucleic acidinto eukaryote cells either using viral vectors (known as transduction, and also using non viral methodsuch as chemical substance, lipid and physical method. Some of the viral vectors used in the transductionare retrovirus, adenovirus, Adeno-associated virus (AAV and Herpes Simplex Virus (HSV. The success oftransfection is determined by various factors which can be assessed using several reporters such as GreenFluorescence Protein (GFP. Key words: gene therapy, non viral transfection, transduction, viral vector. Normal 0 false false false IN X-NONE X-NONE

  17. IAEA Activities in Nuclear High Temperature Heat for Industrial Processes

    International Nuclear Information System (INIS)

    Reitsma, Frederik

    2017-01-01

    IAEA activities to support Member States: Information Exchange; Modelling and Simulations; Development of Methodologies; Safety; Technology Support; Education and Training; Knowledge Preservation. Assist MSs with national nuclear programmes; Support innovations in nuclear power deployment; Facilitate and assist international R&D collaborations. Interest in HTGR technology • The IAEA activities in the area of HTGR are guided by the recommendations of the TWG-GCRs – Currently 14 members: China, France, Germany, Indonesia, Japan, Korea (Rep. of), Netherlands, Russian Federation, South Africa, Switzerland, Turkey, Ukraine, United Kingdom, United States of America – 3 International Organizations: OECD/NEA, European Commission, Gen-IV Forum. – 2 new members in 2017: Poland and Singapore. Meetings • Meet every 24 months • Next meeting: 30 October – 1 November 2017 • Other Member states with some activities on HTGRs – Kazakhstan – history of close cooperation with Japan – Saudi Arabia – feasibility study for HTGRs to provide heat for the petro-chemical industry – Canada – three HTR designs under consideration in the nuclear regulator pre-licensing vendor design reviews

  18. Evaluation Indicators for Analysis of Nuclear Fuel Cycle Sustainability

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Chang Joon; Ko, Won Il; Chang, Hong Lae

    2008-01-15

    In this report, an attempt was made to derive indicators for the evaluation of the sustainability of the nuclear fuel cycle, using the methodologies developed by the INPRO, OECD/NEA and Gen-IV. In deriving the indicators, the three main elements of the sustainability, i.e., economics, environmental impact, and social aspect, as well as the technological aspect of the nuclear fuel cycle, considering the importance of the safety, were selected as the main criteria. An evaluation indicator for each criterion was determined, and the contents and evaluation method of each indicator were proposed. In addition, a questionnaire survey was carried out for the objectivity of the selection of the indicators in which participated some experts of the Korea Energy Technology and Emergency Management Institute (KETEMI) . Although the proposed indicators do not satisfy the characteristics and requirements of general indicators, it is presumed that they can be used in the analysis of the sustainability of the nuclear fuel cycle because those indicators incorporate various expert judgment and public opinions. On the other hand, the weighting factor of each indicator should be complemented in the future, using the AHP method and expert advice/consultations.

  19. Titanium(IV), zirconium, hafnium and thorium

    International Nuclear Information System (INIS)

    Brown, Paul L.; Ekberg, Christian

    2016-01-01

    Titanium can exist in solution in a number of oxidation states. The titanium(IV) exists in acidic solutions as the oxo-cation, TiO 2+ , rather than Ti 4+ . Zirconium is used in the ceramics industry and in nuclear industry as a cladding material in reactors where its reactivity towards hydrolysis reactions and precipitation of oxides may result in degradation of the cladding. In nature, hafnium is found together with zirconium and as a consequence of the contraction in ionic radii that occurs due to the 4f -electron shell, the ionic radius of hafnium is almost identical to that of zirconium. All isotopes of thorium are radioactive and, as a consequence of it being fertile, thorium is important in the nuclear fuel cycle. The polymeric hydrolysis species that have been reported for thorium are somewhat different to those identified for zirconium and hafnium, although thorium does form the Th 4 (OH) 8 8+ species.

  20. Glycogen Storage Disease Type IV

    DEFF Research Database (Denmark)

    Bendroth-Asmussen, Lisa; Aksglaede, Lise; Gernow, Anne B

    2016-01-01

    molecular genetic analyses confirmed glycogen storage disease Type IV with the finding of compound heterozygosity for 2 mutations (c.691+2T>C and c.1570C>T, p.R524X) in the GBE1 gene. We conclude that glycogen storage disease Type IV can cause early miscarriage and that diagnosis can initially be made...

  1. Modelo poblacional con algoritmos genéticos

    OpenAIRE

    Veliz Quintero, Eduardo; Rodriguez Ojeda, Luis

    2009-01-01

    Para el desarrollo de este trabajo, “MODELO POBLACIONAL CON ALGORITMOS GENÉTICOS”, he investigado la rama de la inteligencia artificial, como son los algoritmos genéticos. Primero presento en forma general los aspectos que envuelven los algoritmos genéticos, parto de la necesidad de optimizar, así como su historia y posibles aplicaciones y luego he cubierto detalladamente todo lo que pude investigar sobre la teoría de los algoritmos genéticos, sus fundamentos matemáticos, tipos de algoritmos ...

  2. Sobre el significado del descubrimiento del gen FOXP2

    OpenAIRE

    Longa Martínez, Víctor Manuel

    2006-01-01

    El reciente descubrimiento del gen FOXP2 ha ofrecido la primera evidencia clara de la base genética del lenguaje, mostrando una correlación inequívoca desde la perspectiva genética entre una versión mutada de F0XP2 y los trastornos lingüísticos de diferente tipo sufridos por una familia inglesa, conocida como KE. El objetivo central del presente trabajo es discutir diferentes aspectos relacionados con tal descubrimiento; especialmente, la discusión del significado de FOXP2 con ...

  3. About the structure and stability of complex carbonates of thorium (IV), cerium (IV), zirconium (IV), hafnium (IV)

    International Nuclear Information System (INIS)

    Dervin, Jacqueline

    1972-01-01

    This research thesis addressed the study of complex carbonates of cations of metals belonging to the IV A column, i.e. thorium (IV), zirconium (IV), hafnium (IV), and also cerium (IV) and uranium (VI), and more particularly focused on ionic compounds formed in solution, and also on the influence of concentration and nature of cations on stability and nature of the formed solid. The author first presents methods used in this study, discusses their precision and scope of validity. She reports the study of the formation of different complex ions which have been highlighted in solution, and the determination of their formation constants. She reports the preparation and study of the stability domain of solid complexes. The next part reports the use of thermogravimetric analysis, IR spectrometry, and crystallography for the structural study of these compounds

  4. A combined XAFS, ESI TOF-MS and LIBD study on the formation of polynuclear Zr(IV), Th(IV) and Pu(IV) species

    Science.gov (United States)

    Rothe, J.; Walther, C.; Brendebach, B.; Büchner, S.; Fuss, M.; Denecke, M. A.; Geckeis, H.

    2009-11-01

    The long term radiotoxicity of spent nuclear fuel disposed of in deep underground repositories after discharge from nuclear power reactors is determined by actinide elements, mainly plutonium. Water intrusion into the repository might cause container corrosion and leaching of the waste matrices, leading to the release of Pu and other actinides into the geological environment. Performance assessment for a future nuclear waste repository requires detailed knowledge on actinide aqueous chemistry in the aquifer surrounding the disposal site. Tetravalent actinides exhibit a strong tendency towards hydrolysis and subsequent polymerization and/or colloid formation. These species provide a potential pathway for migration of actinides away from the repository. Therefore, it is of fundamental interest to study their generation and properties in-situ. To this end, X-ray Absorption Fine Structure Spectroscopy (XAFS) at the INE-Beamline for actinide research at ANKA, Electrospray Mass-Spectrometry (ESI TOF-MS) and Laser Induced Breakdown Detection (LIBD) are combined at FZK-INE in a comprehensive attempt to characterize Zr(IV) (An(IV) analogue), Th(IV) and Pu(IV) polymerization and colloid formation.

  5. TrayGen: Arranging objects for exhibition and packaging

    KAUST Repository

    Yang, Yongliang; Huang, Qixing

    2013-01-01

    We present a framework, called TrayGen, to generate tray designs for the exhibition and packaging of a collection of objects. Based on principles from shape perception and visual merchandising, we abstract a number of design guidelines on how

  6. EPCGen2 Pseudorandom Number Generators: Analysis of J3Gen

    Directory of Open Access Journals (Sweden)

    Alberto Peinado

    2014-04-01

    Full Text Available This paper analyzes the cryptographic security of J3Gen, a promising pseudo random number generator for low-cost passive Radio Frequency Identification (RFID tags. Although J3Gen has been shown to fulfill the randomness criteria set by the EPCglobal Gen2 standard and is intended for security applications, we describe here two cryptanalytic attacks that question its security claims: (i a probabilistic attack based on solving linear equation systems; and (ii a deterministic attack based on the decimation of the output sequence. Numerical results, supported by simulations, show that for the specific recommended values of the configurable parameters, a low number of intercepted output bits are enough to break J3Gen. We then make some recommendations that address these issues.

  7. Structural Materials for Innovative Nuclear Systems (SMINS-3) - Workshop Proceedings, Idaho National Laboratory, Idaho Falls, United States, 7-10 October 2013

    International Nuclear Information System (INIS)

    2015-01-01

    The development of innovative nuclear systems such as Gen IV reactors or critical and subcritical transmutation systems requires a good knowledge of the properties of the materials used for designing these reactors. A common feature in developing nuclear systems is the widely recognised need for experimental programmes to select and characterise structural materials. Structural materials research, both at national and international level, can significantly contribute to the future deployment of new systems. Since 2007, the OECD Nuclear Energy Agency Nuclear Science Committee organises a series of workshop on Structural Materials for Innovative Nuclear Systems (SMINS) to stimulate an exchange of information on current materials research programmes for innovative nuclear systems with a view to identifying and developing potential synergies. The third workshop was held on 7-10 October 2013 in Idaho Falls (United States) and organised through the collaboration of the Working Party on Scientific Issues of the Fuel Cycle (WPFC) and the Working Party on Multi-Scale Modelling of Fuels and Structural Materials for Nuclear Systems (WPMM) in co-operation with the European Community (EC) and the International Atomic Energy Agency (IAEA). A total of 74 abstracts were received for either an oral and poster presentation. These proceedings include the papers presented at the workshop

  8. Next Generation Nuclear Plant Phenomena Identification and Ranking Tables (PIRTs) Volume 5: Graphite PIRTs

    International Nuclear Information System (INIS)

    Burchell, Timothy D.; Bratton, Rob; Marsden, Barry; Srinivasan, Makuteswara; Penfield, Scott; Mitchell, Mark; Windes, Will

    2008-01-01

    Here we report the outcome of the application of the Nuclear Regulatory Commission (NRC) Phenomena Identification and Ranking Table (PIRT) process to the issue of nuclear-grade graphite for the moderator and structural components of a next generation nuclear plant (NGNP), considering both routine (normal operation) and postulated accident conditions for the NGNP. The NGNP is assumed to be a modular high-temperature gas-cooled reactor (HTGR), either a gas-turbine modular helium reactor (GTMHR) version (a prismatic-core modular reactor (PMR)] or a pebble-bed modular reactor (PBMR) version (a pebble bed reactor (PBR)] design, with either a direct- or indirect-cycle gas turbine (Brayton cycle) system for electric power production, and an indirect-cycle component for hydrogen production. NGNP design options with a high-pressure steam generator (Rankine cycle) in the primary loop are not considered in this PIRT. This graphite PIRT was conducted in parallel with four other NRC PIRT activities, taking advantage of the relationships and overlaps in subject matter. The graphite PIRT panel identified numerous phenomena, five of which were ranked high importance-low knowledge. A further nine were ranked with high importance and medium knowledge rank. Two phenomena were ranked with medium importance and low knowledge, and a further 14 were ranked medium importance and medium knowledge rank. The last 12 phenomena were ranked with low importance and high knowledge rank (or similar combinations suggesting they have low priority). The ranking/scoring rationale for the reported graphite phenomena is discussed. Much has been learned about the behavior of graphite in reactor environments in the 60-plus years since the first graphite rectors went into service. The extensive list of references in the Bibliography is plainly testament to this fact. Our current knowledge base is well developed. Although data are lacking for the specific grades being considered for Generation IV (Gen IV

  9. Introducing AstroGen: The Astronomy Genealogy Project

    OpenAIRE

    Tenn, Joseph S.

    2016-01-01

    The Astronomy Genealogy Project ("AstroGen"), a project of the Historical Astronomy Division of the American Astronomical Society (AAS), will soon appear on the AAS website. Ultimately, it will list the world's astronomers with their highest degrees, theses for those who wrote them, academic advisors (supervisors), universities, and links to the astronomers or their obituaries, their theses when on-line, and more. At present the AstroGen team is working on those who earned doctorates with ast...

  10. Parapedobacter koreensis gen. nov., sp. nov.

    Science.gov (United States)

    Kim, Myung Kyum; Na, Ju-Ryun; Cho, Dong Ha; Soung, Nak-Kyun; Yang, Deok-Chun

    2007-06-01

    Strain Jip14(T), a Gram-negative, non-spore-forming, rod-shaped, non-motile bacterium, was isolated from dried rice straw and characterized in order to determine its taxonomic position. 16S rRNA gene sequence analysis revealed that strain Jip14(T) belongs to the family Sphingobacteriaceae, and the highest degree of sequence similarity was determined to be to Pedobacter saltans DSM 12145(T) (88.5 %), Pedobacter africanus DSM 12126(T) (87.6 %), Pedobacter heparinus DSM 2366(T) (87.1 %) and Pedobacter caeni LMG 22862(T) (86.9 %). Chemotaxonomic data revealed that strain Jip14(T) possesses menaquinone MK-7 and the predominant fatty acids C(15 : 0) iso, C(16 : 0), C(16 : 0) 10-methyl, C(17 : 0) iso 3-OH and summed feature 3 (C(15 : 0) iso 2-OH/C(16 : 1)omega7c). The results of physiological and biochemical tests clearly demonstrated that strain Jip14(T) represents a distinct species. Based on these data, Jip14(T) should be classified within a novel genus and species, for which the name Parapedobacter koreensis gen. nov., sp. nov. is proposed. The type strain of Parapedobacter koreensis is Jip14(T) (=KCTC 12643(T)=LMG 23493(T)).

  11. Banque Cantonale de Genève

    CERN Multimedia

    Banque Cantonale de Genève

    2011-01-01

    7e Salon Immobilier BCGE le samedi 3 septembre 2011, de 8 h 30 à 13 h 00, au Centre de formation de Conches À cette occasion, les meilleurs spécialistes professionnels genevois de l’immobilier seront réunis en un seul et même lieu. Si vous le souhaitez, un conseiller spécialisé dans les financements hypothécaires évaluera vos possibilités d’investissement immobilier adaptées à votre situation personnelle. En parallèle, les plus importantes régies immobilières de Genève seront à votre disposition pour vous présenter leurs offres actuelles, ainsi que les projets immobiliers futurs et discuter avec vous de la meilleure stratégie à adopter pour trouver l’objet de vos rêves. De plus, vous aurez la possibilité...

  12. Generation IV reactors: economics

    International Nuclear Information System (INIS)

    Dupraz, B.; Bertel, E.

    2003-01-01

    The operating nuclear reactors were built over a short period: no more than 10 years and today their average age rounds 18 years. EDF (French electricity company) plans to renew its reactor park over a far longer period : 30 years from 2020 to 2050. According to EDF this objective implies 3 constraints: 1) a service life of 50 to 60 years for a significant part of the present operating reactors, 2) to be ready to built a generation 3+ unit in 2020 which infers the third constraint: 3) to launch the construction of an EPR (European pressurized reactor) prototype as soon as possible in order to have it operating in 2010. In this scheme, generation 4 reactor will benefit the feedback experience of generation 3 and will take over in 2030. Economic analysis is an important tool that has been used by the generation 4 international forum to select the likely future reactor systems. This analysis is based on 4 independent criteria: the basic construction cost, the construction time, the operation and maintenance costs and the fuel cycle cost. This analysis leads to the evaluation of the global cost of electricity generation and of the total investment required for each of the reactor system. The former defines the economic competitiveness in a de-regulated energy market while the latter is linked to the financial risk taken by the investor. It appears, within the limits of the assumptions and models used, that generation 4 reactors will be characterized by a better competitiveness and an equivalent financial risk when compared with the previous generation. (A.C.)

  13. JHR. A high performance MTR under construction for a sustainable nuclear energy

    International Nuclear Information System (INIS)

    Iracane, Daniel; Cordier, Pierre-Yves

    2009-01-01

    The Access to an up-to-date Material Testing Reactor (MTR) is essential to support a sustainable nuclear energy, meeting industry and public needs, and keeping a high level of scientific expertise. This includes services to existing and coming reactor technologies for major stakes such as safety and competitiveness, lifetime management, operation optimization, development of innovative structural material and fuel required for future systems (innovative Gen III, Gen IV, fusion...), etc. The JHR copes with this context. Design phase has been completed by the end of 2005 and JHR is now under construction. Start of operation is scheduled in 2014. As a new MTR taking benefit of a large available worldwide experience, JHR offers new major experimental capability that will be presented. JHR will be operated within an international users' consortium that will guarantee effective and cost-effective operation. This innovative way to operate a MTR, as a user-facility for the benefit of industry and public bodies, will be presented. (author)

  14. Direct Bandgap Group IV Materials

    Science.gov (United States)

    2016-01-21

    AFRL-AFOSR-JP-TR-2017-0049 Direct Bandgap group IV Materials Hung Hsiang Cheng NATIONAL TAIWAN UNIVERSITY Final Report 01/21/2016 DISTRIBUTION A...NAME(S) AND ADDRESS(ES) NATIONAL TAIWAN UNIVERSITY 1 ROOSEVELT RD. SEC. 4 TAIPEI CITY, 10617 TW 8. PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING...14. ABSTRACT Direct bandgap group IV materials have been long sought for in both academia and industry for the implementation of photonic devices

  15. Estimación de parámetros genéticos para características productivas y reproductivas en los sistemas doble propósito del trópico bajo colombiano

    Directory of Open Access Journals (Sweden)

    A. P. Galeano

    2010-01-01

    Full Text Available Con el objetivo de estimar los componentes de varianza, las heredabilidades, repetibilidades y correlaciones genéticas y fenotípicas para la producción de leche por lactancia (PL, el peso al destete (PD, el intervalo entre partos (IEP y el Índice de Vaca (IV, de las hembras bovinas manejadas en los sistemas de producción de doble propósito del trópico bajo colombiano, se analizaron los registros productivos y reproductivos de 1.687 vacas registradas en la Asociación Colombiana de Criadores de Ganado en Doble Propósito (Asodoble, durante el periodo comprendido entre 1998 y 2007. Se empleó un modelo animal mixto que incluyó los efectos fijos del grupo contemporáneo (finca-sexo-época-año, la composición racial, y la duración de la lactancia como covariable; así como los efectos genéticos aleatorios del animal, el medio ambiente permanente y el residual. Las heredabilidades estimadas para IEP (0,04 y PD (0,11 fueron bajas, y moderadas para PL (0,35 e IV (0,24, respectivamente. La repetibilidad estimada para IEP fue baja (0,08, y para PL (0,41 e IV (0,31 moderada; en el caso de PD este valor fue igual a la heredabilidad (0,11. Las correlaciones genéticas y fenotípicas obtenidas entre PL y PD con respecto a IEP fueron positivas, y se determinó una asociación genética negativa entre PL y PD. Los resultados demostraron que el IV es un buen indicador, desde el punto de vista genético, de la eficiencia productiva y reproductiva de los animales manejados en estos sistemas productivos.

  16. Spacer for enhancing selectivity of functionalized polymer towards Pu(IV)

    International Nuclear Information System (INIS)

    Chavan, Vivek; Pandey, A.K.; Goswami, A.

    2012-01-01

    To address problems in selective and fast preconcentration of Pu(IV) at ultratrace concentration from the multicomponents aqueous media and low level nuclear waste, a new functionalized polymer sorbent was developed

  17. A Study on intensifying efficiency for international collaborative development of Advanced Nuclear Energy Technology

    International Nuclear Information System (INIS)

    Chang, Moon Hee; Kim, H. R.; Kim, H. J.

    2009-08-01

    The objective of the study was to participate the GIF for the efficient propulsion of future nuclear system development. For achieving the objective of this study, the followings were carried out. · Investigation and analysis of the international and domestic trends related to future nuclear system · To maximize the national interests by the strategic participation of GIF meeting - To participate of GIF meeting and to support of relative work - To investigate the System R and D Arrangement and to inform its progress situation · To maximize the propulsion results of Korea/U.S nuclear energy joint research(I-NERI) - To support a delegation by the review of agenda in aspect of the technical/legal point - To participate of BINERIC meeting and to support of relative work · Streamline the nuclear energy R and D due to the effective connection between domestic R and D and international collaboration The result of this study may be used for 1) contribution to establishing the effective foundation and broadening the cooperation activities between the advanced countries and Korea and 2) contribution effective management of Gen IV international collaboration by technical/legal supporting

  18. Measurement of the power trasient and valve closing time, for the zone control system, during a programmed shutdown in August 1989 and its relation with the class IV partial loss event occurred on 27/12/88 in CNE (Embalse nuclear power plant)

    International Nuclear Information System (INIS)

    Paz, A.O. de; Moreno, C.A.; Vinez, J.C.

    1990-01-01

    A description is made of a number of measurements performed during the programmed shutdown on Embalse nuclear power plant (CNE) (August 1989) to validate the existance of a reactivity insertion owing to the emptying of the liquid zone control system. In the event occurred on 27/12/88 when there was a partial loss Cl IV. Once the existance of this contribution was confirmed, the pertinent corrective measures were taken and the test was repeated to verify the effectiveness of the latter. The temporal evolution of a number of neutronic variables and process variables of the liquid zone system were stored in an IBM-PC XT equipped with analog-to-digital converters, for later analysis. (Author) [es

  19. Tziminema unachi n. gen., n. sp. (Nematoda: Strongylidae: Strongylinae) parasite of Baird's tapir Tapirus bairdii from Mexico.

    Science.gov (United States)

    Güiris-Andrade, D M; Oceguera-Figueroa, A; Osorio-Sarabia, D; Pérez-Escobar, M E; Nieto-López, M G; Rojas-Hernández, N M; García-Prieto, L

    2017-11-20

    A new genus and species of nematode, Tziminema unachi n. gen., n. sp. is described from the caecum and colon of Baird's tapir Tapirus bairdii (Gill, 1865), found dead in the Reserva de la Biósfera El Triunfo, Chiapas State, in the Neotropical realm of Mexico. Tziminema n. gen. differs from the other nine genera included in the Strongylinae by two main characteristics: having 7-9 posteriorly directed tooth-like structures at the anterior end of the buccal capsule, and the external surface of the buccal capsule being heavily striated. Phylogenetic analyses of the DNA sequences of the mitochondrial cytochrome c oxidase and nuclear DNA, including a partial sequence of the internal transcribed spacer 1, 5.8S and a partial sequence of the internal transcribed spacer 2 of the new taxon, confirmed its inclusion in Strongylinae and its rank as a new genus.

  20. International conference on innovative technologies for nuclear fuel cycles and nuclear power. Unedited proceedings

    International Nuclear Information System (INIS)

    2004-01-01

    technology is considered to have matured as an industry, innovation is foreseen for further improvement of safety, economy, sustainability, non-proliferation, etc. On the other hand, the general public, politicians and environmental Non Governmental Organizations (NGO's) in many countries view nuclear specialists with distrust. In their view nuclear energy is not needed in the short and medium term and likely not also in the long term. Innovative fuel cycles and nuclear power technologies have to achieve inherent safety, proliferation resistance, foolproof measures against terrorist acts and sabotage, etc., even for being considered as an option. Thus there is a gap to be bridged if the potential benefits of nuclear energy are to be realized for peace and prosperity of humanity. Technical measures such as well-defined user requirements, improved design concepts and applications in addition to electricity generation, have to be developed. Communication has to be substantially improved both within the nuclear community and with the public and society at large. Apart from achieving acceptable economic targets in terms of cost per installed kilowatt and investment cost, it would be necessary to seek appropriate solutions for improving the investment attractiveness of nuclear plants in developing countries. The conference succeeded in bringing together top managers, policy makers and specialists from developed and developing countries as well as representatives of R and D activities in Member States and international projects. There was a broad agreement amongst the participants that international collaboration in general and the collaboration especially between Gen IV and INPRO initiatives should be improved and substantially expanded. The IAEA is expected by all to play a key role in coordinating international efforts to develop innovative technologies

  1. Nuclear fuel technology - Determination of milligram amounts of plutonium in nitric acid solutions - Potentiometric titration with potassium dichromate after oxidation by Ce(IV) and reduction by Fe(II)

    International Nuclear Information System (INIS)

    2000-01-01

    This International Standard describes a precise and accurate analytical method for determining 1 mg to 5 mg of plutonium per millilitre in nitric acid solutions. The method is very selective for plutonium. It is suitable for the direct determination of plutonium in materials ranging from pure product solutions, to solutions of mixed nuclear materials with a uranium/plutonium ratio up to 20:1. However, potential application to the assay of plutonium in solutions of irradiated nuclear fuels and solutions of mixed nuclear materials with uranium/plutonium ratios of 20:1 to 33:1 has not yet been documented. The method recommends that the aliquot be weighed and that the titration burettes be calibrated gravimetrically in order to obtain adequate precision and accuracy. This does not preclude using any alternative technique which can be shown to give an equivalent accuracy. As the reproducibility of the reaction conditions is important to maintain good performance, extensive automatization of the procedure is beneficial

  2. Seleção preliminar de genótipos de pinheira em Bom Jesus-PI Preliminary selection of sugar apple genotypes in Bom Jesus county, Piauí state, Brazil

    Directory of Open Access Journals (Sweden)

    Ítalo Herbert Lucena Cavalcante

    2011-01-01

    Full Text Available A pinheira (Annona squamosa L. ocorre espontaneamente no Nordeste Brasileiro, onde é explorada de forma extrativista, caracterizando-se pela falta de manejo adequado e material genético selecionado. Nesse sentido, foi realizado um experimento com objetivo de avaliar a produtividade, as características físicas e químicas de frutos de dez genótipos de pinheira no município de Bom Jesus, PI. Adotou-se delineamento inteiramente casualizado, com tratamentos representados por dez genótipos de pinheira e três repetições. Foram avaliadas as seguintes variáveis: vitamina C, acidez titulável, sólidos solúveis, relação SS/AT "ratio", diâmetros longitudinal e transversal, relação DL/DT, número se sementes por fruto, massa dos frutos e produção por planta. Os genótipos apresentam diferenças quanto às características químicas, físicas e produtivas dos frutos. Os genótipos foram agrupados em sete grupos, com destaque para o grupo III (Gen-02 e grupo IV (Gen-05, fato que explicitou as diferenças entre os genótipos de pinheira quanto às características produtivas e químicas e físicas dos frutos. Genótipos Gen-01 e Gen-02 apresentam potencial para instalação em plantios comerciais, pela produtividade, formato do fruto ou por caracterizarem fontes naturais de vitamina C.The sugar apple (Annona squamosa L. is native to tropical America, occurring spontaneously in Northeastern Brazil, where it is exploited mainly as subsistence without adequate management and without genetic material selection. An experiment was developed aiming to evaluate yield, physical and chemical characteristics of the fruits of ten sugar apple genotypes in Bom Jesus, Piauí State, Brazil. A completely randomized design with treatments represented by ten genotypes and three replications was adopted. The following variables were evaluated: vitamin C, titratable acidity, soluble solids, SS/TA ratio, longitudinal diameter and transverse, LD/TD, number of

  3. 2nd Gen FeCrAl ODS Alloy Development For Accident-Tolerant Fuel Cladding

    Energy Technology Data Exchange (ETDEWEB)

    Dryepondt, Sebastien N. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Massey, Caleb P. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Edmondson, Philip D. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-08-01

    Extensive research at ORNL aims at developing advanced low-Cr high strength FeCrAl alloys for accident tolerant fuel cladding. One task focuses on the fabrication of new low Cr oxide dispersion strengthened (ODS) FeCrAl alloys. The first Fe-12Cr-5Al+Y2O3 (+ ZrO2 or TiO2) ODS alloys exhibited excellent tensile strength up to 800 C and good oxidation resistance in steam up to 1400 C, but very limited plastic deformation at temperature ranging from room to 800 C. To improve alloy ductility, several fabrication parameters were considered. New Fe-10-12Cr-6Al gas-atomized powders containing 0.15 to 0.5wt% Zr were procured and ball milled for 10h, 20h or 40h with Y2O3. The resulting powder was then extruded at temperature ranging from 900 to 1050 C. Decreasing the ball milling time or increasing the extrusion temperature changed the alloy grain size leading to lower strength but enhanced ductility. Small variations of the Cr, Zr, O and N content did not seem to significantly impact the alloy tensile properties, and, overall, the 2nd gen ODS FeCrAl alloys showed significantly better ductility than the 1st gen alloys. Tube fabrication needed for fuel cladding will require cold or warm working associated with softening heat treatments, work was therefore initiated to assess the effect of these fabrications steps on the alloy microstructure and properties. This report has been submitted as fulfillment of milestone M3FT 16OR020202091 titled, Report on 2nd Gen FeCrAl ODS Alloy Development for the Department of Energy Office of Nuclear Energy, Advanced Fuel Campaign of the Fuel Cycle R&D program.

  4. Annual report 1990 annex IV

    International Nuclear Information System (INIS)

    Smith, B.; Foskolos, K.

    1991-01-01

    The Nuclear Energy Research Department consists of three Laboratories: Reactor Physics and Systems Engineering (LRS), Thermal Hydraulics (LTH), and Materials and Nuclear Processes (LWV). There are additionally two Research Programmes: 'Waste Disposal' (PES) and LWR-Safety (PLS). The Department's activities focus on three main areas: safety and safety-related operational problems of the Swiss nuclear power plants (NPPs), contributions to the issues involved in radioactive waste disposal, future reactors. In addition, scientific-technical services are provided in the nuclear and non-nuclear sectors and for the operation of the relevant site facilities. (author) figs., tabs., refs

  5. Possibilidade de seleção recorrente para aumento do teor de óleo em soja com a utilização da macho-esterilidade genética e da espectroscopia de ressonância nuclear magnética The possibility of recurrent selection to increase the oil content in soybeans using genetic male sterility and NMR spectroscopy

    Directory of Open Access Journals (Sweden)

    Manoel Albino Coelho de Miranda

    1989-01-01

    Full Text Available Com a finalidade de estudar a possibilidade de realizar seleção recorrente, analisaram-se sementes de soja de plantas macho-estéreis e de sua progênies quanto ao teor de óleo no espectroscópio de ressonância nuclear magnética (NMR, no Instituto de Física da Universidade de Campinas de 1984 a 1988. Tais sementes provinham do composto IAC-1, com macho-esterilidade genética e ampla variabilidade quanto à percentagem de óleo (13,5-22,5%. Determinaram-se os coeficientes de repetibilidade, tomando-se o teor de óleo de cada semente da planta macho-estéril como uma medida fenotípica, obtendo-se o valor médio de r = 0,65. Concluiu-se que com a análise de quatro a cinco sementes, é possível representar a planta-mãe, passo importante para viabilizar a seleção recorrente nessa população, visto o pequeno número de sementes produzidas por planta macho-estéril. Utilizando-se a covariância entre a média das sementes da planta macho-estéril e a média de suas progênies, obteve-se h² = 0,73. Essa herdabilidade é alta, e como o caráter teor de óleo tem como principal componente de sua variância genética a variância aditiva, pode-se recomendar a seleção fenotípica. Calculou-se também o coeficiente de herdabilidade no nível da média de progênies, obtendo-se valores desde 0,66, para a média de duas plantas por progênie, até 0,85, para a de sete plantas por progênie. Esses resultados demonstram a possibilidade de seleção recorrente no composto IAC-1, tanto no campo, ao nível de planta macho-estéril, como em casa de vegetação, em seleção baseada na média da progênie.The seed oil content of male sterile plants and their progenies was analised by a NMR spectroscope to study the possibility of recurrent selection to improve the oil content. The seeds derived from a composite named "IAC-1" with genetic male sterility and large variability with respect to oil content. The repeatability coefficient (r for oil content

  6. Gen-III/III+ reactors. Solving the future energy supply shortfall. The SWR-1000 option

    International Nuclear Information System (INIS)

    Stosic, Z.V.

    2006-01-01

    Deficiency of non-renewable energy sources, growing demand for electricity and primary energy, increase in population, raised concentration of greenhouse gases in the atmosphere and global warming are the facts which make nuclear energy currently the most realistic option to replace fossil fuels and satisfy global demand. The nuclear power industry has been developing and improving reactor technology for almost five decades and is now ready for the next generation of reactors which should solve the future energy supply shortfall. The advanced Gen-III/III+ (Generation III and/or III+) reactor designs incorporate passive or inherent safety features which require no active controls or operational intervention to manage accidents in the event of system malfunction. The passive safety equipment functions according to basic laws of physics such as gravity and natural convection and is automatically initiated. By combining these passive systems with proven active safety systems, the advanced reactors can be considered to be amongst the safest equipment ever made. Since the beginning of the 90's AREVA NP has been intensively engaged in the design of two advanced Gen-III+ reactors: (i) PWR (Pressurized Water Reactor) EPR (Evolutionary Power Reactor) and (ii) BWR (Boiling Water Reactor) SWR-1000. The SWR-1000 reactor design marks a new era in the successful tradition of BWR technology. It meets the highest safety standards, including control of a core melt accident. This is achieved by supplementing active safety systems with passive safety equipment of diverse design for accident detection and control and by simplifying systems needed for normal plant operation. A short construction period, flexible fuel cycle lengths and a high fuel discharge burn-up contribute towards meeting economic goals. The SWR-1000 completely fulfils international nuclear regulatory requirements. (author)

  7. ANALISIS GEN HAEMAGGLUTININ PADA VIRUS CAMPAK LIAR

    Directory of Open Access Journals (Sweden)

    Subangkit Subangkit

    2015-05-01

    Full Text Available AbstrakPenyakit Campak disebabkan oleh virus campak yang termasuk genus Morbilivirus dan Family Paramyxoviridae. Penyakit campak masih menjadi masalah kesehatan karena masih ditemukan Kejadian Luar Biasa (KLB di Indonesia. Salah satu penyebab terjadinya KLB tersebut diduga sebagaiakibat perbedaan antigenesitas antara strain vaksin yang digunakan dengan strain virus campak liar yang beredar di Indonesia. Penelitian ini bertujuan mendapatkan gambaran tentang karakteristik genetik gen Haemagglutinin virus campak liar yang ada di Indonesia. Spesimen yang digunakan sebanyak 27 isolat virus penyebab KLB dari 17 propinsi selama periode tahun 2003-2010. Isolat virus dilakukan pemeriksaan secara RT-PCR dan sekuensing dengan metode Sanger. Hasil sekuensing dianalisis dengan menggunakan perangkat lunak Bioedit 7.0 dan MEGA 4.0. Hasil penelitian didapatkan perbedaan 10 asam amino antara virus campak strain vaksin CAM-70 dan virus campak liar pada posisi D416N; K424T; V451M; N455T; V466I; I473T; F476L; Y481S atau Y481N; H495N; G505D. Kesimpulan penelitian ini adalah terdapat perbedaan karakteristik genetik antara virus campak liar di Indonesia berbeda dengan strain virus vaksin CAM-70.Kata kunci : Campak, Analisis Molekuler, Hemagglutinin, CD46AbstractMeasles is caused by virus belonging to the genus Morbilivirus and Family Paramyxoviridae. Measles is still a public health problem because outbreak of measles still found in Indonesia. Outbreak is suspected as a result of differences in antigenicity between vaccine strains used with wild-type measles virus strains circulating in Indonesia. This study aims to get genetic characteristics of wild-type measles virus haemagglutinin gene in Indonesia. The specimens were used 27 viral isolates from 17 provinces period 2003-2010. Viral isolates examined by RT-PCR and sequencing with Sanger method. Sequencing analysis were conducted using Bioedit 7.0 and MEGA 4.0 software. The results showed 10 amino acid differences

  8. Free-format RPG IV

    CERN Document Server

    Martin, Jim

    2013-01-01

    This how-to guide offers a concise and thorough introduction to the increased productivity, better readability, and easier program maintenance that comes with the free-format style of programming in RPG IV. Although free-format information is available in IBM manuals, it is not separated from everything else, thereby requiring hours of tedious research to track down the information needed. This book provides everything one needs to know to write RPG IV in the free-format style, and author Jim Martin not only teaches rules and syntax but also explains how this new style of coding has the pot

  9. Applications of nuclear energy in future

    International Nuclear Information System (INIS)

    Sitek, J.; Necas, V.

    2012-01-01

    Concepts and international frames of generation IV nuclear reactors. A review of use of nuclear energy for non electric applications especially in areas such as seawater desalination, hydrogen production, district heating and other industrial applications. (Author)

  10. Challenges in Human Resources Management for Sustainable Nuclear Power Generation: U.S. Perspectives

    International Nuclear Information System (INIS)

    Goodnight, Charles T.

    2017-01-01

    In the US, average 2-unit staffing is ~1,200 personnel; average 1-unit staffing is ~860 personnel. Staff per megawatt, electric (MWe) are much lower for 2-Unit plants due to economies of scale achieved in most work functions (maintenance, engineering, licensing/regulatory affairs, quality assurance, etc.) when a second reactor unit is present. Staffing models show GEN III/III+ and GEN IV reactors will have fewer personnel than GEN II plants. Staffing requirements have multiple drivers that must be taken into consideration

  11. Proceeding of the Fourth Scientific Presentation on Nuclear Fuel Cycle: Technology of Nuclear Fuel Cycle facing the Challenge of Energy Need on the 21-st Century; Prosiding presentasi ilmiah daur bahan bakar nuklir IV. Tema: teknologi daur bahan bakar nuklir menghadapi tantangan kebutuhan ketenagaan pada abad-21

    Energy Technology Data Exchange (ETDEWEB)

    Suripto, A [National Atomic Energy Agency, Serpong (Indonesia); Sajuti, D [Research and Development Center for Calibration Instrumentation and Metrology, Indonesian Institute of Sciences, Serpong (Indonesia); Aiman, S [Research and Development Center for Applied Chemistry, Indonesian Institute of Sciences, Serpong (Indonesia); Yuwono, I [National Atomic Energy Agency, Serpong (Indonesia); Fathurrachman, [National Atomic Energy Agency, Serpong (Indonesia); Suwarno, H [National Atomic Energy Agency, Serpong (Indonesia); Suwardi, [National Atomic Energy Agency, Serpong (Indonesia); Amini, S [National Atomic Energy Agency, Serpong (Indonesia); Widjaksana, [National Atomic Energy Agency, Serpong (Indonesia)

    1999-03-01

    The proceeding contains papers presented in the Fourth Scientific Presentation on Nuclear Fuel Element Cycle with theme of Technology of Nuclear Fuel Cycle facing the Challenge of Energy Need on the 21{sup s}t Century, held on 1-2 December in Jakarta, Indonesia. These papers were divided by three groups that are technology of exploration, processing, purification and analysis of nuclear materials; technology of nuclear fuel elements and structures; and technology of waste management, safety and management of nuclear fuel cycle. There are 36 papers indexed individually. (ID)

  12. Genética e hanseníase

    Directory of Open Access Journals (Sweden)

    Bernardo Beiguelman

    Full Text Available As diferentes linhas de pesquisa utilizadas para investigar a importância dos fatores hereditários humanos na determinação da resistência/suscetibilidade à infecção pelo Mycobacterium leprae foram discutidas no presente trabalho. Uma síntese dessas abordagens permitiu analisar os resultados das investigações sobre associação da hanseníase com polimorfismos genéticos, distribuição familial da hanseníase, prevalência da hanseníase e distância genética, concordância da hanseníase em gêmeos e estudos genéticos sobre a reação de Mitsuda.

  13. Estudios sobre plantas andinas,- IV

    Directory of Open Access Journals (Sweden)

    Cuatrecasas José

    1943-04-01

    Full Text Available Caracteres genéricos:-Capitulo radiado, con flores dimorfas, las externas apenas más largas que las interiores. Invólucro cónico, de brácteas pluriseriadas pero poco numerosas, flojas, lineal-lanceoladas, agudas, de consistencia herbácea incluso en la fructificación, más largas que el resto del capitulo. Receptáculo alveolado ,con el margen de las fositas ,escamoso-lacerado. Corolas exteriores femeninas, liguladas, con tubo muy corto y casi rectas, ,con 4 líneas longitudinales y 3 dientes gruesos y callosos, en 2-3 filas, con frecuencia provistas de un apéndice lineal en la garganta, rudimento de labio superior.

  14. Mechanical characterization tests of the X2-Gen fuel assembly and skeleton

    International Nuclear Information System (INIS)

    Kim, Hyung Kyu; Yoon, Kyung Ho; Lee, Kang Hee; Kim, Jae Yong; Lee, Young Ho; Kang, Heung Seok

    2011-01-01

    The KNF (KEPCO Nuclear Fuel) requested mechanical characterization tests of a fuel assembly and a skeleton of the X2-Gen fuel. The tests consisted of the lateral vibration and lateral/axial stiffness, lateral/axial impact and combined deflection tests carried out by using the FAMeCT (Fuel Assembly Mechanical Characterization Tester) in KAERI. The upper and lower core plate simulators were newly designed and manufactured because the fuel geometry of the X2-Gen was different from the KSNP type fuel assembly. In addition to this, the upper carriage was also revised with the LM guide system from the previous two guide rods system. Therefore, the axial and combined deflection tests were soundly executed. Each test was repeated twice to confirm the repeatability. The discrepancy from the repetition was small enough to be neglected. The mechanical characterization tests were accredited with the KOLAS (Korea Laboratory Accreditation Scheme) standard, and the certified test reports (lateral vibration, lateral/axial bending and lateral/axial impact) and the uncertified test report (combined deflection) were issued together with the current test result report

  15. Cytomorphologic features distinguishing Bethesda category IV thyroid lesions from parathyroid

    Directory of Open Access Journals (Sweden)

    Simon Sung

    2017-01-01

    Full Text Available Background: Thyroid follicular cells share similar cytomorphological features with parathyroid. Without a clinical suspicion, the distinction between a thyroid neoplasm and an intrathyroidal parathyroid can be challenging. The aim of this study was to assess the distinguishing cytomorphological features of parathyroid (including intrathyroidal and Bethesda category IV (Beth-IV thyroid follicular lesions, which carry a 15%–30% risk of malignancy and are often followed up with surgical resection. Methods: A search was performed to identify “parathyroid” diagnoses in parathyroid/thyroid-designated fine-needle aspirations (FNAs and Beth-IV thyroid FNAs (follicular and Hurthle cell, all with diagnostic confirmation through surgical pathology, immunocytochemical stains, Afirma® analysis, and/or clinical correlation. Unique cytomorphologic features were scored (0-3 or noted as present versus absent. Statistical analysis was performed using R 3.3.1 software. Results: We identified five FNA cases with clinical suspicion of parathyroid neoplasm, hyperthyroidism, or thyroid lesion that had an eventual final diagnosis of the parathyroid lesion (all female; age 20–69 years and 12 Beth-IV diagnoses (11 female, 1 male; age 13–64 years. The following cytomorphologic features are useful distinguishing features (P value: overall pattern (0.001, single cells (0.001, cell size compared to red blood cell (0.01, nuclear irregularity (0.001, presence of nucleoli (0.001, nuclear-to-cytoplasmic ratio (0.007, and nuclear chromatin quality (0.028. Conclusions: There are cytomorphologic features that distinguish Beth-IV thyroid lesions and (intrathyroidal parathyroid. These features can aid in rendering correct diagnoses and appropriate management.

  16. Craniostenose em gêmeos: estudo genético

    Directory of Open Access Journals (Sweden)

    Walter Carlos Pereira

    1968-09-01

    Full Text Available É relatada a ocorrência de formas clínicas diversas de craniostenose em gêmeos de sexo diferente. A menina apresentava obliteração completa da sutura coronaria e dos dois terços anteriores da sutura sagital; no menino a sutura sagital era a única afetada. O estudo genético mostrou que a craniostenose independe de aberrações cromossômicas, indicando ser transmitida por gens recessivos raros de natureza autossômica.

  17. Introducing AstroGen: the Astronomy Genealogy Project

    Science.gov (United States)

    Tenn, Joseph S.

    2016-12-01

    The Astronomy Genealogy Project (AstroGen), a project of the Historical Astronomy Division of the American Astronomical Society (AAS), will soon appear on the AAS website. Ultimately, it will list the world's astronomers with their highest degrees, theses for those who wrote them, academic advisors (supervisors), universities, and links to the astronomers or their obituaries, their theses when online, and more. At present the AstroGen team is working on those who earned doctorates with astronomy-related theses. We show what can be learned already, with just ten countries essentially completed.

  18. La genética de las poblaciones centroamericanas

    OpenAIRE

    Barrantes, Ramiro

    2005-01-01

    Las poblaciones centroamericanas no han sido objeto de muchos estudios genéticos con la excepción de análisis esporádicos de la variación entre y dentro de los grupos amerindios y de origen africano ubicados en el área. No obstante, en los últimos 15 años se efectuaron investigaciones sistemáticas en este sentido incluyendo poblaciones mestizas, particularmente las de Costa Rica y Panamá. En los amerindios se efectuaron estudios detallados de su estructura genética y las relaciones filogenéti...

  19. Genes and proteins of Escherichia coli (GenProtEc).

    Science.gov (United States)

    Riley, M; Space, D B

    1996-01-01

    GenProtEc is a database of Escherichia coli genes and their gene products, classified by type of function and physiological role and with citations to the literature for each. Also present are data on sequence similarities among E.coli proteins with PAM values, percent identity of amino acids, length of alignment and percent aligned. The database is available as a PKZip file by ftp from mbl.edu/pub/ecoli.exe. The program runs under MS-DOS on IMB-compatible machines. GenProtEc can also be accessed through the World Wide Web at URL http://mbl.edu/html/ecoli.html.

  20. 11. IV avati Draakoni galeriis...

    Index Scriptorium Estoniae

    2005-01-01

    Tanel Saare (sünd. 1979) näitus "Gott und huhn episode IV: seed shower". Eksponeeritakse väljavõtteid aktsioonidest aastatel 2000-2004 Turus, Nürnbergis, Berliinis, Lohusalus ja Soulis. Osa aktsioone toimus koos rühmitusega Non Grata

  1. Estimación de parámetros genéticos para características productivas y reproductivas en los sistemas doble propósito del trópico bajo colombiano

    Directory of Open Access Journals (Sweden)

    A. P. Galeano

    2010-06-01

    Full Text Available Con el objetivo de estimar los componentes de varianza, las heredabilidades, repetibilidadesy correlaciones genéticas y fenotípicas para la producción de leche por lactancia(PL, el peso al destete (PD, el intervalo entre partos (IEP y el Índice de Vaca (IV,de las hembras bovinas manejadas en los sistemas de producción de doble propósitodel trópico bajo colombiano, se analizaron los registros productivos y reproductivosde 1.687 vacas registradas en la Asociación Colombiana de Criadores de Ganado enDoble Propósito (Asodoble, durante el periodo comprendido entre 1998 y 2007. Seempleó un modelo animal mixto que incluyó los efectos fijos del grupo contemporáneo(finca-sexo-época-año, la composición racial, y la duración de la lactancia comocovariable; así como los efectos genéticos aleatorios del animal, el medio ambientepermanente y el residual. Las heredabilidades estimadas para IEP (0,04 y PD (0,11fueron bajas, y moderadas para PL (0,35 e IV (0,24, respectivamente. La repetibilidadestimada para IEP fue baja (0,08, y para PL (0,41 e IV (0,31 moderada; en el casode PD este valor fue igual a la heredabilidad (0,11. Las correlaciones genéticas y fenotípicasobtenidas entre PL y PD con respecto a IEP fueron positivas, y se determinóuna asociación genética negativa entre PL y PD. Los resultados demostraron que el IVes un buen indicador, desde el punto de vista genético, de la eficiencia productiva yreproductiva de los animales manejados en estos sistemas productivos.

  2. Transient Analysis Needs for Generation IV Reactor Concepts

    International Nuclear Information System (INIS)

    Siefken, L.J.; Harvego, E.A.; Coryell, E.W.; Davis, C.B.

    2002-01-01

    The importance of nuclear energy as a vital and strategic resource in the U. S. and world's energy supply mix has led to an initiative, termed Generation IV by the U.S. Department of Energy (DOE), to develop and demonstrate new and improved reactor technologies. These new Generation IV reactor concepts are expected to be substantially improved over the current generation of reactors with respect to economics, safety, proliferation resistance and waste characteristics. Although a number of light water reactor concepts have been proposed as Generation IV candidates, the majority of proposed designs have fundamentally different characteristics than the current generation of commercial LWRs operating in the U.S. and other countries. This paper presents the results of a review of these new reactor technologies and defines the transient analyses required to support the evaluation and future development of the Generation IV concepts. The ultimate objective of this work is to identify and develop new capabilities needed by INEEL to support DOE's Generation IV initiative. In particular, the focus of this study is on needed extensions or enhancements to SCDAP/RELAP5/3D code. This code and the RELAP5-3D code from which it evolved are the primary analysis tools used by the INEEL and others for the analysis of design-basis and beyond-design-basis accidents in current generation light water reactors. (authors)

  3. Analisis Mutasi Gen Protein X Virus Hbv Pada Penderita Hepatitis B Akut Di Manado

    OpenAIRE

    Fatimawali; Kepel, Billy

    2014-01-01

    Faktor-faktor yang mempengaruhi perkembangan hepatitis B kronis menjadi kanker hati antara lain mutasi pada gen x. Penelitian ini bertujuan untuk mengidentifikasi gen protein x virus HBV dan menganalisis apakah terjadi mutasi gen yang terkait dengan munculnya tumor ganas sirosis hati (HCC). Penelitian ini menggunakan primer untuk proses nested PCR yang telah dirancang sebelumnya. Proses nested PCR terhadap 10 sampel DNA HBV pasien dilakukan untuk mengamplifikasi fragmen DNA gen x dilanjutkan ...

  4. Development of a nuclear fuel cycle transparency framework

    International Nuclear Information System (INIS)

    Love, Tracia L.

    2005-01-01

    Nuclear fuel cycle transparency can be defined as a confidence building approach among political entities to ensure civilian nuclear facilities are not being used for the development of nuclear weapons. Transparency concepts facilitate the transfer of nuclear technology, as the current international political climate indicates a need for increased methods of assuring non-proliferation. This research develops a system which will augment current non-proliferation assessment activities undertaken by U.S. and international regulatory agencies. It will support the export of nuclear technologies, as well as the design and construction of Gen. IV energy systems. Additionally, the framework developed by this research will provide feedback to cooperating parties, thus ensuring full transparency of a nuclear fuel cycle. As fuel handling activities become increasingly automated, proliferation or diversion potential of nuclear material still needs to be assessed. However, with increased automation, there exists a vast amount of process data to be monitored. By designing a system that monitors process data continuously, and compares this data to declared process information and plant designs, a faster and more efficient assessment of proliferation risk can be made. Figure 1 provides an illustration of the transparency framework that has been developed. As shown in the figure, real-time process data is collected at the fuel cycle facility; a reactor, a fabrication plant, or a recycle facility, etc. Data is sent to the monitoring organization and is assessed for proliferation risk. Analysis and recommendations are made to cooperating parties, and feedback is provided to the facility. The analysis of proliferation risk is based on the following factors: (1) Material attractiveness: the quantification of factors relevant to the proliferation risk of a certain material (e.g., highly enriched Pu-239 is more attractive than that of lower enrichment) (2) The static (baseline) risk: the

  5. MACK/MACKLIB system for nuclear response functions

    International Nuclear Information System (INIS)

    Abdou, M.A.; Gohar, Y.

    1978-01-01

    The MACK computer program calculates energy pointwise and multigroup nuclear response functions from basic nuclear data in ENDF/B format. The new version of the program, MACK-IV, incorporates major developments and improvements aimed at maximizing the utilization of available nuclear data and ensuring energy conservation in nuclear heating calculations. A new library, MACKLIB-IV, of nuclear response functions was generated in the CTR energy group structure of 171 neutron groups and 36 gamma groups. The library was prepared using MACK-IV, and ENDF/B-IV, and is suitable for fusion, fusion--fission hybrids, and fission applications. 3 figures, 4 tables

  6. MACK/MACKLIB system for nuclear response functions

    International Nuclear Information System (INIS)

    Abdou, M.A.; Gohar, Y.M.

    1978-01-01

    The MACK computer program calculates energy pointwise and multigroup nuclear response functions from basic nuclear data in ENDF/B format. The new version of the program MACK-IV, incorporates major developments and improvements aimed at maximizing the utilization of available nuclear data and ensuring energy conservation in nuclear heating calculations. A new library, MACKLIB-IV, of nuclear response functions was generated in the CTR energy group structure of 171 neutron groups and 36 gamma groups. The library was prepared using MACK-IV and ENDF/B-IV and is suitable for fusion, fusion-fission hydrids, and fission applications

  7. MACK/MACKLIB system for nuclear response functions

    Energy Technology Data Exchange (ETDEWEB)

    Abdou, M.A.; Gohar, Y.M.

    1978-03-15

    The MACK computer program calculates energy pointwise and multigroup nuclear response functions from basic nuclear data in ENDF/B format. The new version of the program MACK-IV, incorporates major developments and improvements aimed at maximizing the utilization of available nuclear data and ensuring energy conservation in nuclear heating calculations. A new library, MACKLIB-IV, of nuclear response functions was generated in the CTR energy group structure of 171 neutron groups and 36 gamma groups. The library was prepared using MACK-IV and ENDF/B-IV and is suitable for fusion, fusion-fission hydrids, and fission applications.

  8. Základy fúzní energetiky IV. – Jaderné komponenty

    Czech Academy of Sciences Publication Activity Database

    Entler, Slavomír; Mlynář, Jan; Dostál, V.

    Září (2016), č. článku 14669. ISSN 1801-4399 Institutional support: RVO:61389021 Keywords : Fusion Energy * Nuclear technology * plasma * ITER Subject RIV: JF - Nuclear Energetics http://energetika.tzb-info.cz/elektroenergetika/14669-zaklady-fuzni-energetiky-iv-jaderne-komponenty

  9. Amine extraction of lead(II) and zirconium(IV) with succinate media

    International Nuclear Information System (INIS)

    Mahamuni, S.V.; Mane, C.P.; Sargar, B.M.; Rajmane, M.M.; Anuse, M.A.

    2004-01-01

    Lead is an important constituent of various alloys, which are in increasing demand in manufacture of batteries and nuclear shielding while the use of zirconium in nuclear power plants as entirely cladding uranium fuel is most important. This study was carried out to optimize the extraction conditions for Pb(II) and zirconium(IV)

  10. Epidemiologia genética: epidemiologia, genética ou nenhuma das anteriores?

    Directory of Open Access Journals (Sweden)

    Aguinaldo Gonçalves

    1990-12-01

    Full Text Available No esforço de contribuir para melhor entendimento da identidade da Epidemiologia Genética, são revistas sua concepção, campo de atuação, métodos e técnicas pertinentes e algumas instâncias de aplicação. Entendendo-a como a área de interesse dos fatores genéticos das doenças e suas interações ambientais, apresenta-se seu campo de atuação como constituído por dois segmentos: um descritivo, que lida com conhecimento da distribuição de tais afecções em famílias e populações, seu impacto a nível do coletivo e sua vigilância epidemiológica, bem como o estudo de seus determinantes; o segundo, caracterizado pela intervenção, refere-se às respectivas medidas preventivas. Em que pese possível limitação pela não-consideração de todas as situações existentes, particular atenção é destinada à revisão de métodos e técnicas que possam ser convergentemente aplicados, a partir de procedimentos genéticos e epidemiológicos. Entre eles, destacam-se como estudos de casos tanto metodologias laboratoriais (como os dermatóglifos quanto quantitativos, como cálculo de herdabilidade e análise multivariada. Alguns objetos de estudo são tomados como instância de aplicação, por contarem com investigações específicas em nosso meio: a hanseníase, o hidrargirismo e a esquizofrenia.In an attempt to contribute to a better undestanding of the identity of Genetic Epidemiology, we review its conception, its field of influence, its appropriate methods and techniques and, at last, some of its applications. Genetic Epidemiology involves the study of genetic factors acting on diseases and on their environmental interactions. These includes two major areas: a descriptive one, related to the distribution of such conditions in families and populations, to the epidemiologic surveillance and to the study of determinants; and another characterized by intervention, which is related to preventive measures. Because of the dificulty in

  11. Modification of the Japanese first nuclear ship reactor for a regional energy supply system

    International Nuclear Information System (INIS)

    Sato, K.; Shimazu, Y.; Narabayashi, T.; Tsuji, M.

    2008-01-01

    Nuclear Ship Mutsu was developed as the first experimental nuclear ship of Japan. It has several advantages as a prototype for regional energy supply system. Considering the attractive advantages of the Mutsu reactor, we investigated the feasibility of development of a small regional energy system by adopting the Mutsu reactor as a starting model. The system could supply with not only electricity but also heat. Heat could be used for hot-water supply, a heating system of a house, melting snow and so on, especially for those in northern part of Japan. The system should satisfy the requirements for GEN IV systems and the current regulations. From this point of view, the modification of the reactor was initiated by taking into improvements and technology of the state of arts to fulfill the requirements such as (1) Longer core life without refueling, (2) Reactivity adjustment for load change without control rods or soluble boron, (3) Simpler operations for load changes and (4) Ultimate safety with sufficient passive capability. Currently it is assumed to use basic standard 17x17 fuel assembly design for WH type PWRs. Nuclear design calculations are carried out by 'SRAC 2002 ', which has been developed in Japan Atomic Energy Agency. Several problems have not been solved yet, but we confirmed the proposed core has about 10 years life time. So the proposed core has a possibility to be used for a small regional energy system. (authors)

  12. Université de Genève | Séminaire de physique corpusculaire | 15 May

    CERN Multimedia

    2013-01-01

    Thorium or Uranium fuel cycle for advanced nuclear reactors ? Fuel recycling, multi-recycling, breeding and burning, Dr Jiri Krepel, Paul Scherrer Institut (PSI).   Wednesday 15 May, 11:15 a.m. Science III, Auditoire 1S081 30, quai Ernest-Ansermet, 1211 Genève 4 Abstract: The Thorium fuel cycle provides several advantages, which make it very attractive; e.g. lower waste production and possibly improved reactor safety. However, there are also some drawbacks if compared with the Uranium cycle. The seminar will provide an overview of the basic physical features of both the Thorium and the Uranium fuel cycles and comparison of their performance (criticality, breeding gain) and safety-related parameters (Doppler effect, coolant density effect), with respect to fuel recycling, multi-recycling, breeding and burning. Organised by Prof. Teresa.Montaruli@unige.ch and Prof. Giuseppe.Iacobucci@unige.ch. More information here.

  13. Solubility study of Tc(IV) in a granitic water

    International Nuclear Information System (INIS)

    Liu, D.J.; Yao, J.; Wang, B.; Bruggeman, C.; Maes, N.

    2007-01-01

    The deep geological disposal of the high level radioactive wastes is expected to be a safe disposal method in most countries. The long-lived fission product 99 Tc is present in large quantities in nuclear wastes and its chemical behavior in aqueous solution is of considerable interest. Under oxidizing conditions technetium exists as the anionic species TcO 4 - whereas under the reducing conditions, expected to exist in a deep geological repository, it is generally predicted that technetium will be present as TcO 2 .nH 2 O. Hence, the mobility of Tc(IV) in reducing groundwater may be limited by the solubility of TcO 2 .nH 2 O under these conditions. Due to this fact it is important to investigate the solubility of TcO 2 .nH 2 O. The solubility determines the release of radionuclides from waste form and is used as a source term in radionuclide migration analysis in performance assessment of radioactive waste repository. Technetium(IV) was prepared by reduction of a technetate solution with Sn 2+ . The solubility of Tc(IV) has been determined in simulated groundwater and redistilled water under aerobic and anaerobic conditions. The effects of pH and CO 3 2- concentration of solution on solubility of Tc(IV) were studied. The concentration of total technetium and Tc(IV) species in the solutions were periodically determined by separating the oxidized and reduced technetium species using a solvent extraction procedure and counting the beta activity of the 99 Tc with a liquid scintillation counter. The experimental results show that the rate of oxidation of Tc(IV) in simulated groundwater and redistilled water is about (1.49 ∝ 1.86) x 10 -9 mol L -1 d -1 under aerobic conditions, while no Tc(IV) oxidation was detected in simulated groundwater and redistilled water under anaerobic conditions. Under aerobic or anaerobic conditions the solubility of Tc(IV) in simulated groundwater and redistilled water is equal on the whole after centrifugation or ultrafiltration. The

  14. Description of a New Planktonic Mixotrophic Dinoflagellate Paragymnodinium shiwhaense n. gen., n. sp from the Coastal Waters off Western Korea: Morphology, Pigments, and Ribosomal DNA Gene Sequence

    DEFF Research Database (Denmark)

    Kang, Nam Seon; Jeong, Hae Jin; Moestrup, Øjvind

    2010-01-01

    The mixotrophic dinoflagellate Paragymnodinium shiwhaense n. gen., n. sp. is described from living cells and from cells prepared by light, scanning electron, and transmission electron microscopy. In addition, sequences of the small subunit (SSU) and large subunit (LSU) rDNA and photosynthetic...... extension-like furrow. The cingulum is as wide as 0.2-0.3 x cell length and displaced by 0.2-0.3 x cell length. Cell length and width of live cells fed Amphidinium carterae were 8.4-19.3 and 6.1-16.0 mu m, respectively. Paragymnodinium shiwhaense does not have a nuclear envelope chamber nor a nuclear...... fibrous connective (NFC). Cells contain chloroplasts, nematocysts, trichocysts, and peduncle, though eyespots, pyrenoids, and pusules are absent. The main accessory pigment is peridinin. The sequence of the SSU rDNA of this dinoflagellate (GenBank AM408889) is 4% different from that of Gymnodinium...

  15. Revision of Corallinaceae (Corallinales, Rhodophyta): recognizing Dawsoniolithon gen. nov., Parvicellularium gen. nov. and Chamberlainoideae subfam. nov. containing Chamberlainium gen. nov. and Pneophyllum.

    Science.gov (United States)

    Caragnano, Annalisa; Foetisch, Alexandra; Maneveldt, Gavin W; Millet, Laurent; Liu, Li-Chia; Lin, Showe-Mei; Rodondi, Graziella; Payri, Claude E

    2018-03-25

    A multi-gene (SSU, LSU, psbA and COI) molecular phylogeny of the family Corallinaceae (excluding the subfamilies Lithophylloideae and Corallinoideae) showed a paraphyletic grouping of six monophyletic clades. Pneophyllum and Spongites were reassessed and recircumscribed using DNA sequence data integrated with morpho-anatomical comparisons of type material and recently collected specimens. We propose Chamberlainoideae subfam. nov., including the type genus Chamberlainium gen. nov., with C. tumidum comb. nov. as the generitype, and Pneophyllum. Chamberlainium is established to include several taxa previously ascribed to Spongites, the generitype of which currently resides in Neogoniolithoideae. Additionally we propose two new genera, Dawsoniolithon gen. nov. (Metagoniolithoideae), with D. conicum comb. nov. as the generitype and Parvicellularium gen. nov. (subfamily incertae sedis), with P. leonardi sp. nov. as the generitype. Chamberlainoideae has no diagnostic morpho-anatomical features that enable one to assign specimens to it without DNA sequence data, and it is the first subfamily to possess both Type 1 (Chamberlainium) and Type 2 (Pneophyllum) tetra/bisporangial conceptacle roof development. Two characters distinguish Chamberlainium from Spongites: tetra/biasporangial conceptacle chamber diameter (300 μm in Spongites) and tetra/bisporangial conceptacle roof thickness (8 cells in Spongites). Two characters also distinguish Pneophyllum from Dawsoniolithon: tetra/bisporangial conceptacle roof thickness (8 cells in Dawsoniolithon) and thallus construction (dimerous in Pneophyllum vs. monomerous in Dawsoniolithon). This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

  16. A Novel Role of Human Holliday Junction Resolvase GEN1 in the Maintenance of Centrosome Integrity

    DEFF Research Database (Denmark)

    Gao, M.; Danielsen, Jannie Michaela Rendtlew; Wei, L.-Z.

    2012-01-01

    but not catalytic activity of GEN1 is required for preventing centrosome hyper-amplification, formation of multiple mitotic spindles, and multi-nucleation. Our findings provide novel insight into the biological functions of GEN1 by uncovering an important role of GEN1 in the regulation of centrosome integrity....

  17. Optimal trading strategy for GenCo in LMP-based and bilateral ...

    African Journals Online (AJOL)

    cboonchu

    GenCo) ... In Li and Shahidehpour (2005), a game-based bidding strategy for GenCos with ..... With the different demands, dispatched levels of GenCos vary as shown in Table 6. .... optimisation, AI applications to power systems, and power system ...

  18. GenBank blastn search result: AK064582 [KOME

    Lifescience Database Archive (English)

    Full Text Available AK064582 002-112-F03 AY007820.1 Daucus carota ATPase8 (ATP8) gene, ATP8-Sp1b allele, complete cds; chimeric... ATPase9 (ATP9) gene, ATP9-Sp3 allele, complete cds; and chimeric ATPase6 (ATP6) gen

  19. Safer Systems: A NextGen Aviation Safety Strategic Goal

    Science.gov (United States)

    Darr, Stephen T.; Ricks, Wendell R.; Lemos, Katherine A.

    2008-01-01

    The Joint Planning and Development Office (JPDO), is charged by Congress with developing the concepts and plans for the Next Generation Air Transportation System (NextGen). The National Aviation Safety Strategic Plan (NASSP), developed by the Safety Working Group of the JPDO, focuses on establishing the goals, objectives, and strategies needed to realize the safety objectives of the NextGen Integrated Plan. The three goal areas of the NASSP are Safer Practices, Safer Systems, and Safer Worldwide. Safer Practices emphasizes an integrated, systematic approach to safety risk management through implementation of formalized Safety Management Systems (SMS) that incorporate safety data analysis processes, and the enhancement of methods for ensuring safety is an inherent characteristic of NextGen. Safer Systems emphasizes implementation of safety-enhancing technologies, which will improve safety for human-centered interfaces and enhance the safety of airborne and ground-based systems. Safer Worldwide encourages coordinating the adoption of the safer practices and safer systems technologies, policies and procedures worldwide, such that the maximum level of safety is achieved across air transportation system boundaries. This paper introduces the NASSP and its development, and focuses on the Safer Systems elements of the NASSP, which incorporates three objectives for NextGen systems: 1) provide risk reducing system interfaces, 2) provide safety enhancements for airborne systems, and 3) provide safety enhancements for ground-based systems. The goal of this paper is to expose avionics and air traffic management system developers to NASSP objectives and Safer Systems strategies.

  20. An electronic flight bag for NextGen avionics

    Science.gov (United States)

    Zelazo, D. Eyton

    2012-06-01

    The introduction of the Next Generation Air Transportation System (NextGen) initiative by the Federal Aviation Administration (FAA) will impose new requirements for cockpit avionics. A similar program is also taking place in Europe by the European Organisation for the Safety of Air Navigation (Eurocontrol) called the Single European Sky Air Traffic Management Research (SESAR) initiative. NextGen will require aircraft to utilize Automatic Dependent Surveillance-Broadcast (ADS-B) in/out technology, requiring substantial changes to existing cockpit display systems. There are two ways that aircraft operators can upgrade their aircraft in order to utilize ADS-B technology. The first is to replace existing primary flight displays with new displays that are ADS-B compatible. The second, less costly approach is to install an advanced Class 3 Electronic Flight Bag (EFB) system. The installation of Class 3 EFBs in the cockpit will allow aircraft operators to utilize ADS-B technology in a lesser amount of time with a decreased cost of implementation and will provide additional benefits to the operator. This paper describes a Class 3 EFB, the NexisTM Flight-Intelligence System, which has been designed to allow users a direct interface with NextGen avionics sensors while additionally providing the pilot with all the necessary information to meet NextGen requirements.

  1. Justicia y genética: compensando las diferencias

    Directory of Open Access Journals (Sweden)

    Alejandra Zúñiga-Fajuri

    2013-01-01

    Full Text Available Se analizan los dilemas morales asociados a los avances científicos que en la actualidad nos exigen repensar el concepto de igualdad equitativa de oportunidades. Asimismo, se pasa revista a la discusión filosófica en torno al origen de las desventajas sociales y genéticas que permiten las desigualdades sociales.

  2. Distributed Generation Market Demand Model (dGen): Documentation

    Energy Technology Data Exchange (ETDEWEB)

    Sigrin, Benjamin [National Renewable Energy Lab. (NREL), Golden, CO (United States); Gleason, Michael [National Renewable Energy Lab. (NREL), Golden, CO (United States); Preus, Robert [National Renewable Energy Lab. (NREL), Golden, CO (United States); Baring-Gould, Ian [National Renewable Energy Lab. (NREL), Golden, CO (United States); Margolis, Robert [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-02-01

    The Distributed Generation Market Demand model (dGen) is a geospatially rich, bottom-up, market-penetration model that simulates the potential adoption of distributed energy resources (DERs) for residential, commercial, and industrial entities in the continental United States through 2050. The National Renewable Energy Laboratory (NREL) developed dGen to analyze the key factors that will affect future market demand for distributed solar, wind, storage, and other DER technologies in the United States. The new model builds off, extends, and replaces NREL's SolarDS model (Denholm et al. 2009a), which simulates the market penetration of distributed PV only. Unlike the SolarDS model, dGen can model various DER technologies under one platform--it currently can simulate the adoption of distributed solar (the dSolar module) and distributed wind (the dWind module) and link with the ReEDS capacity expansion model (Appendix C). The underlying algorithms and datasets in dGen, which improve the representation of customer decision making as well as the spatial resolution of analyses (Figure ES-1), also are improvements over SolarDS.

  3. Meet Mr. and Mrs. Gen X: A New Parent Generation

    Science.gov (United States)

    Howe, Neil

    2010-01-01

    Slowly but surely, Generation Xers have been taking over from Baby Boomers as the majority of parents in elementary and secondary education. In the early 1990s, Gen Xers began joining parent-teacher associations in the nation's elementary schools. Around 2005, they became the majority of middle school parents. By the fall of 2008, they took over…

  4. PowerGen plc report and accounts 1994

    International Nuclear Information System (INIS)

    1994-01-01

    The annual report and accounts of PowerGen plc for the year 1994 are presented. Financial highlights are quoted, followed by the Chairman's statement, reviews by the Chief Executive and Financial Directors, reports by the Auditors and Directors, balance sheets and details of the consolidated profit and loss account and principal accounting policies. A four year summary and shareholder information are included. (UK)

  5. Measuring Gen-Y Customer Experience in the Banking Sector

    Directory of Open Access Journals (Sweden)

    Kyguolienė Asta

    2017-12-01

    Full Text Available The article analyses customer experience as the subject of marketing research and presents methods for assessing customer experience. The results of empirical research revealing the Gen-Y customer experience in using the Lithuanian commercial banks’ services are presented.

  6. A New Parent Generation: Meet Mr. and Mrs. Gen X

    Science.gov (United States)

    Howe, Neil

    2010-01-01

    Slowly but surely, Generation Xers have been taking over from Baby Boomers as the majority of parents in elementary and secondary education. Gen-X parents and Boomer parents belong to two neighboring generations, each possessing its own location in history and its own peer personality. They are similar in some respects, but clearly different in…

  7. GenSVM: a generalized multiclass support vector machine

    NARCIS (Netherlands)

    G.J.J. van den Burg (Gertjan); P.J.F. Groenen (Patrick)

    2016-01-01

    textabstractTraditional extensions of the binary support vector machine (SVM) to multiclass problems are either heuristics or require solving a large dual optimization problem. Here, a generalized multiclass SVM is proposed called GenSVM. In this method classification boundaries for a K-class

  8. Gymnoxanthella radiolariae gen. et sp. nov. (Dinophyceae), a dinoflagellate symbiont from solitary polycystine radiolarians.

    Science.gov (United States)

    Yuasa, Tomoko; Horiguchi, Takeo; Mayama, Shigeki; Takahashi, Osamu

    2016-02-01

    The symbiotic dinoflagellate Gymnoxanthella radiolariae T. Yuasa et T. Horiguchi gen. et sp. nov. isolated from polycystine radiolarians is described herein based on light, scanning and transmission electron microscopy as well as molecular phylogenetic analyses of SSU and LSU rDNA sequences. Motile cells of G. radiolariae were obtained in culture, and appeared to be unarmored. The cells were 9.1-11.4 μm long and 5.7-9.4 μm wide, and oval to elongate oval in the ventral view. They possessed an counterclockwise horseshoe-shaped apical groove, a nuclear envelope with vesicular chambers, cingulum displacement with one cingulum width, and the nuclear fibrous connective; all of these are characteristics of Gymnodinium sensu stricto (Gymnodinium s.s.). Molecular phylogenetic analyses also indicated that G. radiolariae belongs to the clade of Gymnodinium s.s. However, in our molecular phylogenetic trees, G. radiolariae was distantly related to Gymnodinium fuscum, the type species of Gymnodinium. Based on the consistent morphological, genetic, and ecological divergence of our species with the other genera and species of Gymnodinium s.s., we considered it justified to erect a new, separate genus and species G. radiolariae gen. et sp. nov. As for the peridinioid symbiont of radiolarians, Brandtodinium has been erected as a new genus instead of Zooxanthella, but the name Zooxanthella is still valid. Brandtodinium is a junior synonym of Zooxanthella. Our results suggest that at least two dinoflagellate symbiont species, peridinioid Zooxanthella nutricula and gymnodinioid G. radiolariae, exist in radiolarians, and that they may have been mixed and reported as "Z. nutricula" since the 19th century. © 2016 Phycological Society of America.

  9. Next generation of human resources for GEN (Generation) III+ new build projects

    International Nuclear Information System (INIS)

    Baltin, Goerge; Glaubrecht, Stefan; Schoenfelder, Christian

    2014-01-01

    requires a wide spread approach, involving important stakeholders in this field, such as nuclear operators, nuclear suppliers, academic institutions and political institutions. The specific approach will vary from one country to another and will depend on various factors, e.g. the objectives of the national nuclear program, the existing nuclear infrastructure (if any, e.g. legal framework, educational institutions), the existence (and possibly maturity) of a nuclear industry, the selected GEN III+ technology and the related local supply chain, as well as the integration of national institutions into international networks. The paper provides a systematic overview of the dimensions to be considered as well as the various options and development paths available, and the factors determining the selection process for a specific national approach fusing the efforts of authorities, utilities, education providers and industry. The commitment of industry is illustrated by presenting some examples from recent activities in which AREVA is involved, such as partnerships with academic institutions in Germany, Poland, or Slovakia. Furthermore, as international networks will play an increasingly important role for human resources development, AREVA's participation in international educational associations like ENEN (European Nuclear Education Network), or in international projects, e.g. those funded by the European Commission, is covered. This is assisted by AREVA's involvement in implementing a new methodology for training and job taxonomy (ECVET), supporting life-long learning and international mobility. Finally the paper draws some conclusions on different approaches, and provides some recommendations for future human resources development activities. (authors)

  10. Uruguay; 2011 Article IV Consultation

    OpenAIRE

    International Monetary Fund

    2011-01-01

    This 2011 Article IV Consultation highlights that the growth momentum in Uruguay has continued into 2011 but a slowdown is under way, led by weaker exports and slower public investment. Uruguay’s economic and financial vulnerabilities are modest, and the government has reduced debt vulnerabilities significantly and built important financial buffers. Executive Directors have commended authorities’ skillful macroeconomic management that has underpinned Uruguay’s excellent economic performance, ...

  11. Austria; 2013 Article IV Consultation

    OpenAIRE

    International Monetary Fund

    2013-01-01

    This paper presents details of Austria’s 2013 Article IV Consultation. Austria has been growing economically but is facing challenges in the financial sector. Full implementation of medium-term fiscal adjustment plans require specifying several measures and plans that need gradual strengthening to take expected further bank restructuring cost into account. It suggests that strong early bank intervention and resolution tools, a better designed deposit insurance system, and a bank-financed reso...

  12. Pemotongan dan Menyambung DNA dalam Kloning Gen, Studi pada Kloning Gen Prolidase dari Bakteri Asam Laktat

    Directory of Open Access Journals (Sweden)

    Ketut Suriasih

    2015-03-01

    Full Text Available Gene cloning in lactic acid bacteria (LAB is crucial in term to increase their ability to hydrolyze milk protein such as proline. This proline could be hydrolyzed when the LAB undergone cloning on their genome coding the enzyme. The cloning process need technology to separate/isolate the gene capable of proline hydrolyze. Isolation of DNA containing prolidase gene, need DNA genome cutting. After isolation of DNA gene coding prolidase, it is then recombined with other bacterial DNA to obtained recombinant gene. The process need ligase. In gene cloning, knowledge of cutting and joining the DNA should be understood. The enzyme take the role in cutting and joining the DNA were restriction endonuclease and ligase. The restriction enzyme function (1 in inserting a gen into plasmid contained in a vector during gene cloning, and gene expression experiment, and (2 to identify the gene. It is important that the researcher already have standardized  sequenced gene as control. The DNA contained target gene was cut using some restriction enzyme, then the gene was arrayed in electrophoresis gel using southern blot technique. DNA sequence was elucidated by addition of ethydium bromide. To identify/characterize the isolated gene, this DNA sequence was encountered the control DNA.

  13. Nuclear measurements

    International Nuclear Information System (INIS)

    Schenkel, R.

    2005-01-01

    Nuclear measurements play a fundamental role in the development of nuclear technology and the assurance of its peaceful use. They are also required in many non-power nuclear applications such as in nuclear medicine, agriculture, environmental protection, etc. This presentation will show examples of most recent advances in measurement methodology or technology in the areas described below. The Generation IV International Forum has selected six innovative reactor systems as candidates for a next generation of sustainable, economic and safe nuclear energy systems. The choice of the best options relies heavily on the availability of accurate nuclear data that can only be obtained, in an international effort, using highly specialised facilities. Significant efforts are being directed towards the partitioning and transmutation of highly active nuclear waste. Different concepts involving fast reactors or accelerator-driven systems are being studied in view of their transmutation capabilities. State of the art equipment has been developed to assess basic properties of nuclear fuel at very high burn-up; some fine examples of this work will be shown. Physical and chemical methods play a crucial role in the detection and identification of radioisotopes used in various stages of the nuclear fuel cycle. Radiation measurement techniques are used, for example, to monitor the quantities of uranium, plutonium and other actinide elements in fuel enrichment and reprocessing facilities. Another field of application of physical and chemical methods is the characterisation of nuclear material seized from illicit trafficking. Seized material has to be analysed in order to obtain clues on its origin and intended use and to prevent diversion of nuclear material from the same source in the future. A recent highlight in basic physics relates to nuclear fission and transmutation with high intensity lasers. Ultra-fast high intensity lasers can produce high energy (tens of MeV) photons through

  14. Construction of Research Reactors for Gen 3 and Gen 4 Reactors Development

    International Nuclear Information System (INIS)

    Behar, Christophe

    2014-01-01

    Christophe Behar, Director of the Nuclear Energy Division at CEA, detailed the different kind of research reactors and the issues in term of investment, use, side application such as the medical isotopes production

  15. ASTRID, the SFR Gen IV technology demonstrator project: where are we, where do we stand for? - 15439

    International Nuclear Information System (INIS)

    Rouault, J.; Abonneau, E.; Settimo, D.; Hamy, J.M.; Hayafune, H.; Gefflot, R.; Benard, R.P.; Mandement, O.; Chauveau, T.; Lambert, G.; Audouin, P.; Mochida, H.; Iitsuka, T.; Fukuie, M; Molyneux, J.; Mazel, J.L.

    2015-01-01

    The Preconceptual Design phase (AVP1) of the ASTRID Project ended late 2012, the main goal was to evaluate innovative options. It is now followed by the AVP2 phase planned until the end of 2015 whose objectives are both to focus the design in order to finalize a coherent reactor outline and to finalize by December 2015 the Safety Option Report. The CEA acts as the industrial architect of the project. In 2014, twelve industrial partners were involved in the project. Japan which participates now in the design studies and also in Research/Development in support of the ASTRID Project and VELAN of the French 'Pole Nucleaire de Bourgogne', are the latest partners to join the Project. The Option Selection Process (RCO) is continuing during the AVP2 phase although structuring decisions remain to be made (the choice of the Energy Conversion System between Rankine cycle and Gas Brayton cycle). Other important option selections, which could nevertheless be reconsidered before starting the core of the Basic Design phase are: the choice of an internal fuel storage and a gas fuel handling chain, a rectangular reactor building with a single wall containment, the steam generator size the vertical handling of components. In addition, BOP studies considering the Marcoule site as a possible one are going on. The next important milestone is at the end of 2015 with the release by the Project team of a convincing and coherent Conceptual Design file. (authors)

  16. New RELAP5-3D Lead and LBE Thermophysical Properties Implementation for Safety Analysis of Gen IV Reactors

    Directory of Open Access Journals (Sweden)

    P. Balestra

    2016-01-01

    Full Text Available The latest versions of RELAP5-3D© code allow the simulation of thermodynamic system, using different type of working fluids, that is, liquid metals, molten salt, diathermic oil, and so forth, thanks to the ATHENA code integration. The RELAP5-3D© water thermophysical properties are largely verified and validated; however there are not so many experiments to generate the liquid metals ones in particular for the Lead and the Lead Bismuth Eutectic. Recently, new and more accurate experimental data are available for liquid metals. The comparison between these state-of-the-art data and the RELAP5-3D© default thermophysical properties shows some discrepancy; therefore a tool for the generation of new properties binary files has been developed. All the available data came from experiments performed at atmospheric pressure. Therefore, to extend the pressure domain below and above this pressure, the tool fits a semiempirical model (soft sphere model with inverse-power-law potential, specific for the liquid metals. New binary files of thermophysical properties, with a detailed mesh grid of point to reduce the code mass error (especially for the Lead, were generated with this tool. Finally, calculations using a simple natural circulation loop were performed to understand the differences between the default and the new properties.

  17. Identificación de mutaciones puntuales del gen de la 21-hidroxilasa en pacientes afectados con hiperplasia suprarrenal congénita.

    Directory of Open Access Journals (Sweden)

    Dora Fonseca

    2005-06-01

    Full Text Available lntroducción. La hiperplasia suprarrenal congénita es un trastorno autosómico recesivo debido a la inadecuada secreción de cortisol. Mas del 95% de los casos de hiperplasia suprarrenal congénita son causados por defectos del gen de la 21 hidroxilasa, CYP21A2 . Las manifestaciones clínicas incluyen la forma clásica y la forma no clásica. Objetivos. Determinar la frecuencia de las mutaciones puntuales P30L, IVS2-12AIC-G, Del 8pb, I172N, cluster Ex 6, V281L, Q318X, R356W y P453S en pacientes con hiperplasia suprarrenal congénita. Materiales y métodos. Se estudiaron 58 pacientes, de los cuales, 48 fueron clásicos y 10 no clásicos. Mediante PCR alelo-especifica y ACRS (Amplified Creation Restriction Sites, se analizaron 9 mutaciones puntuales del gen CYP21A2 y se determinó la frecuencia en la población analizada. Resultados. Los alelos afectados se identificaron en el 82,8% de los cromosomas. Las mutaciones mas frecuentes fueron: IVS2-12AIC-G (26,7%, Q318X (21,5%, V281L (12,1% e I172N (12,1%. Conclusiones. Las mutaciones mas frecuentes en Colombia son similares a las de otros países del mundo, excepto para Q318X que presentó una mayor frecuencia, pero similar a la de otros países latinoamericanos. Este hallazgo y la existencia de 17,2% de alelos no identificados puede indicar diferencia entre el acervo genético de las poblaciones. En la forma clásica perdedora de sal predominaron las mutaciones Q318X e IVS2-12AIC-G; en la virilizante simple, IVS2-12AIC-G e I172N y en la no clásica , V281L, lo cual esta relacionado con el grado de actividad enzimática. En la forma no clásica, se encontraron alelos severos en el 66,7% de los casos, lo que determina el riesgo de tener hijos afectados con la forma grave virilizante simple o perdedora de sal. Los resultados reportados permiten ofrecer asesoramiento genético y diagnóstico prenatal.

  18. Justicia en salud y genética

    Directory of Open Access Journals (Sweden)

    Maria Graciela De Ortuzar

    2014-06-01

    Full Text Available Las expectativas puestas en el conocimiento genético exceden el ámbito de la medicina tradiciona, debido a que la intervención directa en la lotería natural demandaría el replanteamiento de conceptos centrales de justicia en salud: necesidades médicas, enfermedad, normalidad, e igualdad de oportunidades en el acceso a la salud. El punto en debate es sí el replanteo de dichos conceptos conlleva un cambio radical en las teorías de justicia (libertariana y/o liberal, mostrando su obsolescencia, o sí simplemente se requiere ampliar dichos conceptos claves por fallas estructurales en las mismas teorías. Como hipótesis general considero que los supuestos cuestionamientos, lejos de socavar las bases de las teorías de justicia, sólo ponen en evidencia sus viejos problemas estructurales. Por razones expositivas, dividiré la presentación tres partes. En la Primera parte, analizo la teoría libertariana, estudiando las contradicciones del modelo a través del impacto de la información genética en el seguro privado de salud. En la Segunda Parte, desarrollo la propuesta alternativa liberal rawlsianadanielsiana del modelo de seguro público, evaluando las implicaciones de la genética a partir de la crítica de su concepto biológico de enfermedad y su restricción al acceso a la salud por necesidades naturales. En la Tercera parte presento un modelo integral de necesidades y capacidades básicas, comprendiendo la prevención, el tratamiento y el mejoramiento moralmente permisible (genético y no genético.Mi aporte principal consiste en la elaboración de este modelo normativo integral de necesidades y capacidades para la regulación conjunta de la información y terapia genética con los restantes problemas de salud.

  19. Perda auditiva genética Genetic hearing loss

    Directory of Open Access Journals (Sweden)

    Ricardo Godinho

    2003-01-01

    Full Text Available O progresso das pesquisas relacionadas à perda auditiva genética tem provocado um importante avanço do entendimento dos mecanismos moleculares que governam o desenvolvimento, a função, a resposta ao trauma e o envelhecimento do ouvido interno. Em países desenvolvidos, mais de 50% dos casos de surdez na infância é causada por alterações genéticas e as perdas auditivas relacionadas à idade têm sido associadas com mecanismos genéticos. OBJETIVO: O objetivo desta revisão é relatar as informações mais recentes relacionadas às perdas audtivas de origem genética. FORAMA DE ESTUDO: Revisão sistemática. MATERIAL E MÉTODO: A revisão da literatura inclui artigos indexados à MEDLINE (Biblioteca Nacional de Saúde, NIH-USA e publicados nos últimos 3 anos, além das informações disponíveis na Hereditary Hearing Loss Home Page. CONCLUSÃO: Os recentes avanços no entendimento das perdas auditivas de origem genética têm favorecido a nossa compreensão da função auditiva e tornado o diagnóstico mais apurado. Possivelmente, no futuro, este conhecimento também proporcionará o desenvolvimento de novas terapias para o tratamento das causas genéticas das perdas auditivas.The progress in the research of genetic hearing loss has advanced our understanding of the molecular mechanisms that govern inner ear development, function and response to injury and aging. In the developed world, over 50% of childhood deafness is attributable to genetic causes and even age-related hearing loss has been associated with genetic mechanisms. AIM: The objective of this review is to summarize recent knowledge in genetic hearing loss. STUDY DESIGN: Sistematic review. MATERIAL AND METHODS: The literature review included articles indexed at MEDLINE (The National Library of Medicine, The National Institute of Health - USA focusing on publications from the past 3 years plus the information available at the Hereditary Hearing Loss Home Page. CONCLUSION

  20. Crystalline cerium(IV) phosphates

    International Nuclear Information System (INIS)

    Herman, R.G.; Clearfield, A.

    1976-01-01

    The ion exchange behaviour of seven crystalline cerium(IV) phosphates towards some of the alkali metal cations is described. Only two of the compounds (A and C) possess ion exchange properties in acidic solutions. Four others show some ion exchange characteristics in basic media with some of the alkali cations. Compound G does not behave as an ion exchanger in solutions of pH + , but show very little Na + uptake. Compound E undergoes ion exchange with Na + and Cs + , but not with Li+. Both Li + and Na + are sorbed by compounds A and C. The results are indicative of structures which show steric exclusion phenomena. (author)

  1. PREPARATION OF OXOPORPHINATOMANGANESE (IV) COMPLEX

    Energy Technology Data Exchange (ETDEWEB)

    Willner, I.; Otvos, J.; Calvin, M.

    1980-07-01

    Oxo-manganese-tetraphenylporphyrin (O=Mn{sup IV}-TPP) has been prepared by an oxygen-transfer reaction from iodosylbenzene to MnIITPP and characterized by its i.r. and field desorption mass spectra, which are identical to those of the product obtained by direct oxidation of Mn{sup III}(TPP) in an aqueous medium; it transfers oxygen to triphenylphosphine to produce triphenylphosphine oxide, and it is suggested that similar intermediates are important in oxygen activation by cytochrome P-450 as well as in the photosynthetic evolution of oxygen.

  2. Canada's largest co-gen project

    International Nuclear Information System (INIS)

    Salaff, S.

    2000-01-01

    In November 2000, the TransAlta Energy Corp. began construction on its $400 million natural gas fuelled cogeneration project in Sarnia Ontario. The Sarnia Regional Cogeneration Project (SRCP) is designed to integrate a new 440 MW cogeneration facility to be built at the Sarnia Division of Dow Chemicals Canada Inc. with nearby existing generators totaling 210 MW at Dow and Bayer Inc. At 650 MW, the new facility will rank as Canada's largest cogeneration installation. Commercial operation is scheduled for October 2002. TransAlta owns three natural gas fuelled cogeneration facilities in Ontario (in Ottawa, Mississauga and Windsor) totaling 250 MW. The cost of electric power in Ontario is currently controlled by rising natural gas prices and the supply demand imbalance. This balance will be significantly affected by the possible return to service of 2000 MW of nuclear generating capacity. The SRCP project was announced just prior to the Ontario Energy Competition Act of October 1998 which committed the province to introduce competition to the electricity sector and which created major uncertainties in the electricity market. Some of the small, 25 MW projects which survived the market uncertainty included the Toronto-based Toromont Energy Ltd. project involving gas fuelled cogeneration and methane gas generation from landfill projects in Sudbury and Waterloo. It was emphasized that cogeneration and combined heat and power projects have significant environmental advantages over large combined cycle facilities. The Ontario Energy Board is currently considering an application from TransAlta to link the SRCP facility to Ontario's Hydro One Network Inc.'s transmission grid. 1 fig

  3. Mutation in mitochondrial complex IV subunit COX5A causes pulmonary arterial hypertension, lactic acidemia, and failure to thrive.

    Science.gov (United States)

    Baertling, Fabian; Al-Murshedi, Fathiya; Sánchez-Caballero, Laura; Al-Senaidi, Khalfan; Joshi, Niranjan P; Venselaar, Hanka; van den Brand, Mariël Am; Nijtmans, Leo Gj; Rodenburg, Richard Jt

    2017-06-01

    COX5A is a nuclear-encoded subunit of mitochondrial respiratory chain complex IV (cytochrome c oxidase). We present patients with a homozygous pathogenic variant in the COX5A gene. Clinical details of two affected siblings suffering from early-onset pulmonary arterial hypertension, lactic acidemia, failure to thrive, and isolated complex IV deficiency are presented. We show that the variant lies within the evolutionarily conserved COX5A/COX4 interface domain, suggesting that it alters the interaction between these two subunits during complex IV biogenesis. In patient skin fibroblasts, the enzymatic activity and protein levels of complex IV and several of its subunits are reduced. Lentiviral complementation rescues complex IV deficiency. The monomeric COX1 assembly intermediate accumulates demonstrating a function of COX5A in complex IV biogenesis. A potential therapeutic lead is demonstrated by showing that copper supplementation leads to partial rescue of complex IV deficiency in patient fibroblasts. © 2017 Wiley Periodicals, Inc.

  4. Formation, characterization, and stability of plutonium (IV) colloid

    International Nuclear Information System (INIS)

    Hobart, D.E.; Morris, D.E.; Palmer, P.D.; Newton, T.W.

    1989-01-01

    Plutonium is expected to be a major component of the waste element package in any high-level nuclear waste repository. Plutonium(IV) is known to form colloids under chemical conditions similar to those found in typical groundwaters. In the event of a breach of a repository, these colloids represent a source of radionuclide transport to the far-field environment, in parallel with the transport of dissolved waste element species. In addition, the colloids may decompose or disaggregate into soluble ionic species. Thus, colloids represent an additional term in determining waste element solubility limits. A thorough characterization of the physical and chemical properties of these colloids under relevant conditions is essential to assess the concentration limits and transport mechanisms for the waste elements at the proposed Yucca Mountain Repository site. This report is concerned primarily with recent results obtained by the Yucca Mountain Project (YMP) Solubility Determination Task pertaining to the characterization of the structural and chemical properties of Pu(IV) colloid. Important results will be presented which provides further evidence that colloidal plutonium(IV) is structurally similar to plutonium dioxide and that colloidal plutonium(IV) is electrochemically reactive. 13 refs., 7 figs

  5. Genética e hanseníase

    OpenAIRE

    Beiguelman Bernardo

    2002-01-01

    As diferentes linhas de pesquisa utilizadas para investigar a importância dos fatores hereditários humanos na determinação da resistência/suscetibilidade à infecção pelo Mycobacterium leprae foram discutidas no presente trabalho. Uma síntese dessas abordagens permitiu analisar os resultados das investigações sobre associação da hanseníase com polimorfismos genéticos, distribuição familial da hanseníase, prevalência da hanseníase e distância genética, concordância da hanseníase em gêmeos e est...

  6. Análise de distância genética entre acessos do gênero Psidium via marcadores ISSR

    Directory of Open Access Journals (Sweden)

    Názila Nayara Silva de Oliveira

    2014-12-01

    Full Text Available O objetivo deste trabalho foi avaliar a distância genética entre 37 acessos da espécie cultivada Psidium guajava, L. (goiaba e de araçás do gênero Psidium do banco de germoplasma da Universidade Estadual do Norte Fluminense (UENF, via marcadores moleculares ISSR. Nos 17 marcadores selecionados, foram obtidas 216 bandas polimórficas. Pelo método de agrupamento UPGMA, houve a formação de cinco principais grupos. Os acessos de araçá da espécie P. cattleyanum Sabine , ficaram alocados nos grupos I e II. No grupo II, foi observada, dentro da espécie P cattleyanum, maior proximidade com a goiabeira. No grupo III, ficou alocado o acesso da espécie P. guineense Sw (araçá-do-campo e dentre os araçás, foi o que ficou mais próximo da goiaba. Os genótipos de goiabeira ficaram alocados do grupo IV e V, confirmando sua alta divergência. Os marcadores moleculares foram eficientes em estimar a distância genética intra e interespecífica.

  7. Estructura y diversidad genética en vacas Holstein de Antioquia usando un polimorfismo del gen bGH

    Directory of Open Access Journals (Sweden)

    Juan Rincon F.

    2013-03-01

    Full Text Available Objetivo. Determinar las frecuencias alélicas y genotípicas del polimorfismo del intrón 3 del gen bGH y estimar algunos parámetros de estructura poblacional en ganado Holstein. Materiales y métodos. El estudio se realizó con 1366 vacas Holstein en 120 hatos de 11 municipios del departamento de Antioquia. Se extrajo DNA por el método de Salting out y la genotipificación se realizó usando la técnica de PCR-RFLPs. La diversidad genética se determinó mediante la comparación de las heterocigosidades, El equilibrio de Hardy-Weinberg (HW y la diferenciación genética entre las poblaciones se realizó usando el software Arlequín 2.0 Las frecuencias alélicas y genotípicas se evaluaron mediante el paquete estadístico SAS®. Resultados. Las frecuencias genotípicas encontradas fueron 0.764 (+/+, 0.223 (+/- y 0.013 (-/- y las frecuencias alélicas 0.876 (+ y 0.124 (-. No se encontraron desviaciones del Equilibrio de Hardy Weinberg en ninguna de las subpoblaciones. La diversidad genética determinada mediante la comparación de las heterocigosidades fue relativamente baja entre poblaciones pero al interior de estas no. El valor de FST de toda la población fue de 0.0068 y significativo (p<0.05, algunos FST pareados también lo fueron, tomando valores desde 0.0 a 0.13. Los estadísticos FIT y FIS no fueron significativos. Conclusiones. El gen bGH es un candidato interesante para evaluar características de importancia económica ya que no parece haber sido sometido a selección directa, presenta una variabilidad media en las poblaciones, observándose diferenciación genética significativa entre distintos municipios, producto de los diferentes sistemas de producción y acceso a las biotecnologías.

  8. Test Review: Advanced Clinical Solutions for WAIS-IV and WMS-IV

    Science.gov (United States)

    Chu, Yiting; Lai, Mark H. C.; Xu, Yining; Zhou, Yuanyuan

    2012-01-01

    The authors review the "Advanced Clinical Solutions for WAIS-IV and WMS-IV". The "Advanced Clinical Solutions (ACS) for the Wechsler Adult Intelligence Scale-Fourth Edition" (WAIS-IV; Wechsler, 2008) and the "Wechsler Memory Scale-Fourth Edition" (WMS-IV; Wechsler, 2009) was published by Pearson in 2009. It is a…

  9. Crusticorallina gen. nov., a nongeniculate genus in the subfamily Corallinoideae (Corallinales, Rhodophyta).

    Science.gov (United States)

    Hind, Katharine R; Gabrielson, Paul W; P Jensen, Cassandra; Martone, Patrick T

    2016-12-01

    Molecular phylogenetic analyses of 18S rDNA (SSU) gene sequences confirm the placement of Crusticorallina gen. nov. in Corallinoideae, the first nongeniculate genus in an otherwise geniculate subfamily. Crusticorallina is distinguished from all other coralline genera by the following suite of morpho-anatomical characters: (i) sunken, uniporate gametangial and bi/tetrasporangial conceptacles, (ii) cells linked by cell fusions, not secondary pit connections, (iii) an epithallus of 1 or 2 cell layers, (iv) a hypothallus that occupies 50% or more of the total thallus thickness, (v) elongate meristematic cells, and (vi) trichocytes absent. Four species are recognized based on rbcL, psbA and COI-5P sequences, C. painei sp. nov., the generitype, C. adhaerens sp. nov., C. nootkana sp. nov. and C. muricata comb. nov., previously known as Pseudolithophyllum muricatum. Type material of Lithophyllum muricatum, basionym of C. muricata, in TRH comprises at least two taxa, and therefore we accept the previously designated lectotype specimen in UC that we sequenced to confirm its identity. Crusticorallina species are very difficult to distinguish using morpho-anatomical and/or habitat characters, although at specific sites, some species may be distinguished by a combination of morpho-anatomy, habitat and biogeography. The Northeast Pacific now boasts six coralline endemic genera, far more than any other region of the world. © 2016 Phycological Society of America.

  10. NextGen Avionics Roadmap Version 2.0

    Science.gov (United States)

    2011-09-30

    Systems Analysis ( IPSA ) Division has defined multiple NextGen Operational (NGOps) Levels, projecting relative performance and risk based on differing...degrees of capability improvements, as shown in Figure 4. IPSA forecasts include the most likely performance NGOps level (i.e., NGOps 3-4), as well...in the near-term. Figures 5 through 9 de- pict the various programs and capabilities aligned with the various NGOps levels. Factors from the IPSA

  11. EVALUATION DE LA SENSIBILITE A Bemisia tabaci (GEN) DE 13 ...

    African Journals Online (AJOL)

    AISA

    champ, le comportement de 13 variétés de tomate contre la pression de Bemisia tabaci (Gen), une mouche vecteur du virus de la jaunisse en cuillère des ... en saison sèche il y a une vingtaine d'années atteignaient 100 % et les pertes de production ... semaines. Le semis s'est effectué sur une planche de 9 m2 (9 x 1 m2).

  12. PREFACE: International Symposium on Vacuum Science & Technology and its Application for Accelerators (IVS 2012)

    Science.gov (United States)

    Pandit, V. S.; Pal, Gautam

    2012-11-01

    including many from Industry and R&D Institutions spread over the country. The society has an active chapter at Kolkata. The society was formed with the main aim to promote, encourage and develop the growth of Vacuum Science, Techniques and Applications in the country. In order to achieve this aim it has been conducting a number of short term courses at graduate and technician levels on vacuum science and technology on topics ranging from low vacuum to ultrahigh vacuum. So far it has conducted 47 such courses in different parts of the country and imparted training to more than 1500 people in the field. Some of these courses were in-plant training courses conducted on the premises of the establishment and designed to take care of the special needs of the establishment. Recently such a course was conducted at the Nuclear Fuel Complex, Hyderabad and Fundamentals of Vacuum Technology in general and Large Vacuum Furnaces, Vacuum Metallurgy in particular were the themes of the workshop. IVS also regularly conducts national and international seminars and symposia on vacuum science and technology with special emphasis on themes related to applications of vacuum. A large number of delegates from all over India take part in the deliberations of such seminars and symposia and present their work. IVS also arranges technical visits to different industries and research institutes. The society also helped in the UNESCO sponsored post-graduate level courses in vacuum science, technology and applications conducted by Mumbai University. IVS extended its support in standardizing many of the vacuum instruments and played a vital role in helping to set up a Regional Testing Centre along with BARC. As part of the development of vacuum education, the society arranges the participation of expert members on the subject to deliver lectures and take part in devising courses in the universities. IVS has published the 'Bulletin of Indian Vacuum Society' quarterly since its inception, in which articles

  13. Low Drift Type N Thermocouples for Nuclear Applications

    International Nuclear Information System (INIS)

    Scervini, M.; Rae, C.

    2013-06-01

    Thermocouples are the most commonly used sensors for temperature measurement in nuclear reactors. They are crucial for the control of current nuclear reactors and for the development of GEN IV reactors. In nuclear applications thermocouples are strongly affected by intense neutron fluxes. As a result of the interaction with neutrons, the thermoelements of the thermocouples undergo transmutation, which produces a time dependent change in composition and, as a consequence, a time dependent drift of the thermocouple signal. Thermocouple drift can be very significant for in-pile temperature measurements and may render the temperature sensors unreliable after exposure to nuclear radiation for relatively short times compared to the life required for temperature sensors in nuclear applications. Previous experiences with type K thermocouples in nuclear reactors have shown that they are affected by neutron irradiation only to a limited extent. Similarly type N thermocouples are expected to be only slightly affected by neutron fluxes. Currently the use of Nickel based thermocouples is limited to temperatures lower than 1000 deg. C due to drift related to phenomena other than nuclear irradiation. In this work, undertaken as part of the European project METROFISSION, the drift of type N thermocouples has been investigated in the temperature range 600-1300 deg. C. The approach of this study is based on the attempt to separate the contributions of each thermo-element to drift. In order to identify the dominant thermo-element for drift, the contributions of both positive (NP) and negative (NN) thermo-elements to the total drift of 3.2 mm diameter MIMS thermocouples have been measured in each drift test using a pure Pt thermo-element as a reference. Conventional Inconel-600 sheathed type N thermocouples have been compared with type N thermocouples sheathed in a new alloy. At temperatures higher than 1000 deg. C conventional Inconel600 sheathed type N thermocouples can experience a

  14. SALOME PLATFORM and TetGen for Polyhedral Mesh Generation

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Sang Yong; Park, Chan Eok; Kim, Shin Whan [KEPCO E and C Company, Inc., Daejeon (Korea, Republic of)

    2014-05-15

    SPACE and CUPID use the unstructured mesh and they also require reliable mesh generation system. The combination of CAD system and mesh generation system is necessary to cope with a large number of cells and the complex fluid system with structural materials inside. In the past, a CAD system Pro/Engineer and mesh generator Pointwise were evaluated for this application. But, the cost of those commercial CAD and mesh generator is sometimes a great burden. Therefore, efforts have been made to set up a mesh generation system with open source programs. The evaluation of the TetGen has been made in focusing the application for the polyhedral mesh generation. In this paper, SALOME will be evaluated for the efforts in conjunction with TetGen. In section 2, review will be made on the CAD and mesh generation capability of SALOME. SALOME and TetGen codes are being integrated to construct robust polyhedral mesh generator. Edge removal on the flat surface and vertex reattachment to the solid are two challenging tasks. It is worthwhile to point out that the Python script capability of the SALOME should be fully utilized for the future investigation.

  15. The GenABEL Project for statistical genomics.

    Science.gov (United States)

    Karssen, Lennart C; van Duijn, Cornelia M; Aulchenko, Yurii S

    2016-01-01

    Development of free/libre open source software is usually done by a community of people with an interest in the tool. For scientific software, however, this is less often the case. Most scientific software is written by only a few authors, often a student working on a thesis. Once the paper describing the tool has been published, the tool is no longer developed further and is left to its own device. Here we describe the broad, multidisciplinary community we formed around a set of tools for statistical genomics. The GenABEL project for statistical omics actively promotes open interdisciplinary development of statistical methodology and its implementation in efficient and user-friendly software under an open source licence. The software tools developed withing the project collectively make up the GenABEL suite, which currently consists of eleven tools. The open framework of the project actively encourages involvement of the community in all stages, from formulation of methodological ideas to application of software to specific data sets. A web forum is used to channel user questions and discussions, further promoting the use of the GenABEL suite. Developer discussions take place on a dedicated mailing list, and development is further supported by robust development practices including use of public version control, code review and continuous integration. Use of this open science model attracts contributions from users and developers outside the "core team", facilitating agile statistical omics methodology development and fast dissemination.

  16. Variabilidad genética en Prosopis ferox (Mimosaceae

    Directory of Open Access Journals (Sweden)

    Alicia D. Burghardt

    2004-01-01

    Full Text Available Prosopis ferox (Mimosaceae es una especie arbustiva o arbórea espinosa que se distribuye desde el Sur de Bolivia hasta el noroeste de la Argentina. En la provincia de Jujuy se encuentra a grandes alturas (entre los 2400 y los 3700 m s.m.. Existe una gran variabilidad morfológica, especialmente en cuanto a las dimensiones del fruto y la cantidad de semillas por fruto, ambas características importantes debido al uso de esta planta como forraje. Con el objeto de verificar si existe además variabilidad genética, se realizó un estudio electroforético de proteínas seminales de árboles procedentes de distintas localidades de la provincia de Jujuy. Los patrones polipeptídicos obtenidos por SDS-PAGE presentaron en total 26 bandas. Cada población se caracterizó por sus patrones de presencia-ausencia de bandas, habiéndose encontrado variabilidad intrapoblacional (polimorfismo en algunas de ellas, siendo otras genéticamente homogéneas. Los índices polimórficos en poblaciones de P. ferox son comparables a los obtenidos previamente en P. ruscifolia. La variabilidad genética interpoblacional hallada por medio del estudio electroforético de las proteínas seminales hace suponer la existencia de ecotipos

  17. Mechanical characterization tests of a candidate skeleton for X-Gen fuel assembly

    International Nuclear Information System (INIS)

    Kim, Hyung Kyu; Yoon, Kyung Ho; Lee, Kang Hee; Kim, Jae Yong; Lee, Young Ho

    2007-09-01

    Since the KNFC (KEPCO Nuclear Fuel Co.) requested a mechanical characterization tests of a candidate skeleton for X-Gen fuel assembly (some welding locations of a center guide tube are free of welding compared with the PLUS7 case) were requested, transverse vibration and stiffness tests were carried out by using the FAMeCT. The major results are as follows. - Transverse vibration test There was no distinguishable discrepancy in the free vibration characteristics between the skeleton without welding at some locations of a center guide tube and that of original assembly (PLUS7; welded at every spacer grid locations). The natural frequencies were measured as 6.8 - 6.9 for the 1st mode; 17.7 - 18.3 for the 2nd mode; 30.2 - 31.2 for the 3rd mode; 50.4 - 52.1 Hz for the 4th mode. As a result, the difference in the vibration characteristics was extremely small regardless of the number of welding of a center guide tube. - Transverse bending test. The transverse bending test results of the X-Gen no. 2 were similar to those of the PLUS7 skeleton. The relationship between the force and displacement was found linear. 521 N was observed at the deflection of 30 mm, and the stiffness at the 6th grid location (load exerting location) was 17.4, 16.3 N/mm in the two consecutive tests. The displacements at the grid locations lower than the 6th grid were at bit smaller than those upper than that due to a comparatively higher rigidity

  18. Workshop 97. Part IV. Proceedings

    International Nuclear Information System (INIS)

    1996-12-01

    This volume of the Proceedings cover the following branches of science and technology: preservation and creation of the environment, architecture, town planning and visual arts, reliability, production systems and technology, nuclear engineering, transport engineering, and economics and business activities. Out of the contributions, 19 have been input to INIS. (P.A.)

  19. Divergência, variabilidade genética e desempenho agronômico em genótipos de couve.

    OpenAIRE

    Azevedo, Alcinei Mistico

    2012-01-01

    Embora haja grande variabilidade genética para a couve, são poucos trabalhos no Brasil que visão obter informações para programas de melhoramento genético nesta cultura. Assim, objetivou-se neste trabalho caracterizar 30 genótipos de couve a partir de caracteres morfo-agronômicos para estimar a divergência genética, a importância dos caracteres para a divergência, o desempenho agronômico, os parâmetros genéticos e a correlação entre as características avaliadas. O experimento foi conduzido na...

  20. Crescimento de genótipos de frangos tipo caipira

    Directory of Open Access Journals (Sweden)

    R. C. Veloso

    2015-10-01

    Full Text Available RESUMOObjetivou-se com este trabalho comparar o padrão de crescimento, mediante ajustes das respectivas curvas de crescimento por modelos não lineares, bem como estudar o desenvolvimento de cortes de carcaça em relação ao peso da carcaça em diferentes genótipos de frangos tipo caipira. Foram utilizados 840 pintos de um dia, machos, distribuídos em delineamento inteiramente ao acaso, dos seguintes genótipos da linhagem Redbro: Caboclo, Carijó, Colorpak, Gigante Negro, Pesadão Vermelho, Pescoço Pelado e Tricolor. As aves foram alojadas em 28 boxes, sendo 30 aves/boxe, em galpão de alvenaria com acesso a um piquete de 45m², com quatro repetições. O peso corporal individual dos frangos foi medido ao nascer, aos 14, 28, 42, 56, 70 e 84 dias de idade. Para a determinação das curvas de crescimento do peso corporal das aves, os dados coletados foram avaliados por meio dos modelos não lineares: Brody, Gompertz, Logístico, Richards e von Bertalanffy. Foi empregado o PROC NLIN do SAS, utilizando-se o método interativo de Gauss-Newton. Os critérios usados para escolha do modelo de melhor ajuste da curva de crescimento foram o coeficiente de determinação, o desvio padrão assintótico, o desvio médio absoluto dos resíduos e o índice assintótico. As análises para obtenção dos coeficientes alométricos foram realizadas por meio do PROC GLM do SAS para os genótipos Carijó, Colorpak, Pesadão Vermelho, Pescoço Pelado e Tricolor. Foram avaliados os pesos da carcaça, do peito, das coxas, das sobrecoxas, das pernas e das asas das aves abatidas aos 85 dias de idade. Apenas as equações propostas por Gompertz, von Bertalanffy e Logístico atingiram a convergência, e o modelo proposto por von Bertalanffy foi o mais adequado para descrever o crescimento dos genótipos de frangos caipiras. Todos os cortes avaliados apresentaram crescimento tardio em relação ao peso da carcaça em genótipos de frangos tipo caipira.