WorldWideScience

Sample records for gels

  1. Thermoresponsive Gels

    Directory of Open Access Journals (Sweden)

    M. Joan Taylor

    2017-01-01

    Full Text Available Thermoresponsive gelling materials constructed from natural and synthetic polymers can be used to provide triggered action and therefore customised products such as drug delivery and regenerative medicine types as well as for other industries. Some materials give Arrhenius-type viscosity changes based on coil to globule transitions. Others produce more counterintuitive responses to temperature change because of agglomeration induced by enthalpic or entropic drivers. Extensive covalent crosslinking superimposes complexity of response and the upper and lower critical solution temperatures can translate to critical volume temperatures for these swellable but insoluble gels. Their structure and volume response confer advantages for actuation though they lack robustness. Dynamic covalent bonding has created an intermediate category where shape moulding and self-healing variants are useful for several platforms. Developing synthesis methodology—for example, Reversible Addition Fragmentation chain Transfer (RAFT and Atomic Transfer Radical Polymerisation (ATRP—provides an almost infinite range of materials that can be used for many of these gelling systems. For those that self-assemble into micelle systems that can gel, the upper and lower critical solution temperatures (UCST and LCST are analogous to those for simpler dispersible polymers. However, the tuned hydrophobic-hydrophilic balance plus the introduction of additional pH-sensitivity and, for instance, thermochromic response, open the potential for coupled mechanisms to create complex drug targeting effects at the cellular level.

  2. Testosterone Nasal Gel

    Science.gov (United States)

    Testosterone nasal gel is used to treat symptoms of low testosterone in men who have hypogonadism (a condition in which the ... does not produce enough natural testosterone). Testosterone nasal gel is used only for men with low testosterone ...

  3. Transport Phenomena in Gel

    Directory of Open Access Journals (Sweden)

    Masayuki Tokita

    2016-05-01

    Full Text Available Gel becomes an important class of soft materials since it can be seen in a wide variety of the chemical and the biological systems. The unique properties of gel arise from the structure, namely, the three-dimensional polymer network that is swollen by a huge amount of solvent. Despite the small volume fraction of the polymer network, which is usually only a few percent or less, gel shows the typical properties that belong to solids such as the elasticity. Gel is, therefore, regarded as a dilute solid because its elasticity is much smaller than that of typical solids. Because of the diluted structure, small molecules can pass along the open space of the polymer network. In addition to the viscous resistance of gel fluid, however, the substance experiences resistance due to the polymer network of gel during the transport process. It is, therefore, of importance to study the diffusion of the small molecules in gel as well as the flow of gel fluid itself through the polymer network of gel. It may be natural to assume that the effects of the resistance due to the polymer network of gel depends strongly on the network structure. Therefore, detailed study on the transport processes in and through gel may open a new insight into the relationship between the structure and the transport properties of gel. The two typical transport processes in and through gel, that is, the diffusion of small molecules due to the thermal fluctuations and the flow of gel fluid that is caused by the mechanical pressure gradient will be reviewed.

  4. Sol-Gel Glasses

    Science.gov (United States)

    Mukherjee, S. P.

    1985-01-01

    Multicomponent homogeneous, ultrapure noncrystalline gels/gel derived glasses are promising batch materials for the containerless glass melting experiments in microgravity. Hence, ultrapure, homogeneous gel precursors could be used to: (1) investigate the effect of the container induced nucleation on the glass forming ability of marginally glass forming compositions; and (2) investigate the influence of gravity on the phase separation and coarsening behavior of gel derived glasses in the liquid-liquid immiscibility zone of the nonsilicate systems having a high density phase. The structure and crystallization behavior of gels in the SiO2-GeO2 as a function of gel chemistry and thermal treatment were investigated. As are the chemical principles involved in the distribution of a second network former in silica gel matrix being investigated. The procedures for synthesizing noncrystalline gels/gel-monoliths in the SiO2-GeO2, GeO2-PbO systems were developed. Preliminary investigations on the levitation and thermal treatment of germania silicate gel-monoliths in the Pressure Facility Acoustic Levitator were done.

  5. Pulse Field Gel Electrophoresis.

    Science.gov (United States)

    Sharma-Kuinkel, Batu K; Rude, Thomas H; Fowler, Vance G

    2016-01-01

    Pulse Field Gel Electrophoresis (PFGE) is a powerful genotyping technique used for the separation of large DNA molecules (entire genomic DNA) after digesting it with unique restriction enzymes and applying to a gel matrix under the electric field that periodically changes direction. PFGE is a variation of agarose gel electrophoresis that permits analysis of bacterial DNA fragments over an order of magnitude larger than that with conventional restriction enzyme analysis. It provides a good representation of the entire bacterial chromosome in a single gel with a highly reproducible restriction profile, providing clearly distinct and well-resolved DNA fragments.

  6. CONFORMANCE IMPROVEMENT USING GELS

    Energy Technology Data Exchange (ETDEWEB)

    Randall S. Seright

    2003-09-01

    This report describes work performed during the second year of the project, ''Conformance Improvement Using Gels.'' The project has two objectives. The first objective is to identify gel compositions and conditions that substantially reduce flow through fractures that allow direct channeling between wells, while leaving secondary fractures open so that high fluid injection and production rates can be maintained. The second objective is to optimize treatments in fractured production wells, where the gel must reduce permeability to water much more than that to oil. Pore-level images from X-ray computed microtomography were re-examined for Berea sandstone and porous polyethylene. This analysis suggests that oil penetration through gel-filled pores occurs by a gel-dehydration mechanism, rather than a gel-ripping mechanism. This finding helps to explain why aqueous gels can reduce permeability to water more than to oil. We analyzed a Cr(III)-acetate-HPAM gel treatment in a production well in the Arbuckle formation. The availability of accurate pressure data before, during, and after the treatment was critical for the analysis. After the gel treatment, water productivity was fairly constant at about 20% of the pre-treatment value. However, oil productivity was stimulated by a factor of 18 immediately after the treatment. During the six months after the treatment, oil productivity gradually decreased to approach the pre-treatment value. To explain this behavior, we proposed that the fracture area open to oil flow was increased substantially by the gel treatment, followed by a gradual closing of the fractures during subsequent production. For a conventional Cr(III)-acetate-HPAM gel, the delay between gelant preparation and injection into a fracture impacts the placement, leakoff, and permeability reduction behavior. Formulations placed as partially formed gels showed relatively low pressure gradients during placement, and yet substantially reduced the

  7. GelTouch

    DEFF Research Database (Denmark)

    Miruchna, Viktor; Walter, Robert; Lindlbauer, David

    2015-01-01

    We present GelTouch, a gel-based layer that can selectively transition between soft and stiff to provide tactile multi-touch feedback. It is flexible, transparent when not activated, and contains no mechanical, electromagnetic, or hydraulic components, resulting in a compact form factor (a 2mm thin...... touchscreen layer for our prototype). The activated areas can be morphed freely and continuously, without being limited to fixed, predefined shapes. GelTouch consists of a poly(N-isopropylacrylamide) gel layer which alters its viscoelasticity when activated by applying heat (>32 C). We present three different...... a tablet with 6x4 tactile areas, enabling a tactile numpad, slider, and thumbstick. We show that the gel is up to 25 times stiffer when activated and that users detect tactile features reliably (94.8%)....

  8. Mechanically induced gel formation

    NARCIS (Netherlands)

    van Herpt, Jochem T.; Stuart, Marc C. A.; Browne, Wesley R.; Feringa, Ben L.

    2013-01-01

    Mechanical triggering of gelation of an organic solution by a carbazole-based bisurea organogelator is described. Both the duration of the mechanical stimulation and the gelator concentration control the gelation process and the characteristics of the gel obtained.

  9. Conformance Improvement Using Gels

    Energy Technology Data Exchange (ETDEWEB)

    Seright, Randall S.; Schrader, Richard; II Hagstrom, John; Wang, Ying; Al-Dahfeeri, Abdullah; Gary, Raven; Marin; Amaury; Lindquist, Brent

    2002-09-26

    This research project had two objectives. The first objective was to identify gel compositions and conditions that substantially reduce flow through fractures that allow direct channeling between wells, while leaving secondary fractures open so that high fluid injection and production rates can be maintained. The second objective was to optimize treatments in fractured production wells, where the gel must reduce permeability to water much more than that to oil.

  10. Crystallization from Gels

    Science.gov (United States)

    Narayana Kalkura, S.; Natarajan, Subramanian

    Among the various crystallization techniques, crystallization in gels has found wide applications in the fields of biomineralization and macromolecular crystallization in addition to crystallizing materials having nonlinear optical, ferroelectric, ferromagnetic, and other properties. Furthermore, by using this method it is possible to grow single crystals with very high perfection that are difficult to grow by other techniques. The gel method of crystallization provides an ideal technique to study crystal deposition diseases, which could lead to better understanding of their etiology. This chapter focuses on crystallization in gels of compounds that are responsible for crystal deposition diseases. The introduction is followed by a description of the various gels used, the mechanism of gelling, and the fascinating phenomenon of Liesegang ring formation, along with various gel growth techniques. The importance and scope of study on crystal deposition diseases and the need for crystal growth experiments using gel media are stressed. The various crystal deposition diseases, viz. (1) urolithiasis, (2) gout or arthritis, (3) cholelithiasis and atherosclerosis, and (4) pancreatitis and details regarding the constituents of the crystal deposits responsible for the pathological mineralization are discussed. Brief accounts of the theories of the formation of urinary stones and gallstones and the role of trace elements in urinary stone formation are also given. The crystallization in gels of (1) the urinary stone constituents, viz. calcium oxalate, calcium phosphates, uric acid, cystine, etc., (2) the constituents of the gallstones, viz. cholesterol, calcium carbonate, etc., (3) the major constituent of the pancreatic calculi, viz., calcium carbonate, and (4) cholic acid, a steroidal hormone are presented. The effect of various organic and inorganic ions, trace elements, and extracts from cereals, herbs, and fruits on the crystallization of major urinary stone and gallstone

  11. Preparation of chitosan gel

    Directory of Open Access Journals (Sweden)

    Lagerge S.

    2012-06-01

    Full Text Available Aerogel conditioning of the chitosan makes it possible to prepare porous solids of significant specific surface. The increase in the chitosan concentration or the degree of acetylation decreases the specific surface of the synthesized chitosan gel. Whereas drying with supercritical CO2 more effectively makes it possible to preserve the volume of the spheres of gel and to have a more significant specific surface in comparison with evaporative drying.

  12. CONFORMANCE IMPROVEMENT USING GELS

    Energy Technology Data Exchange (ETDEWEB)

    Randall S. Seright

    2004-09-30

    This report describes work performed during the third and final year of the project, ''Conformance Improvement Using Gels.'' Corefloods revealed throughput dependencies of permeability reduction by polymers and gels that were much more prolonged during oil flow than water flow. This behavior was explained using simple mobility ratio arguments. A model was developed that quantitatively fits the results and predicts ''clean up'' times for oil productivity when production wells are returned to service after application of a polymer or gel treatment. X-ray computed microtomography studies of gels in strongly water-wet Berea sandstone and strongly oil-wet porous polyethylene suggested that oil penetration through gel-filled pores occurs by a gel-dehydration mechanism, rather than gel-ripping or gel-displacement mechanisms. In contrast, analysis of data from the University of Kansas suggests that the gel-ripping or displacement mechanisms are more important in more permeable, strongly water-wet sandpacks. These findings help to explain why aqueous gels can reduce permeability to water more than to oil under different conditions. Since cement is the most commonly used material for water shutoff, we considered when gels are preferred over cements. Our analysis and experimental results indicated that cement cannot be expected to completely fill (top to bottom) a vertical fracture of any width, except near the wellbore. For vertical fractures with apertures less than 4 mm, the cement slurry will simply not penetrate very far into the fracture. For vertical fractures with apertures greater than 4 mm, the slurry may penetrate a substantial distance into the bottom part of the fracture. However, except near the wellbore, the upper part of the fracture will remain open due to gravity segregation. We compared various approaches to plugging fractures using gels, including (1) varying polymer content, (2) varying placement (extrusion) rate

  13. Design of Autonomous Gel Actuators

    Directory of Open Access Journals (Sweden)

    Shuji Hashimoto

    2011-01-01

    Full Text Available In this paper, we introduce autonomous gel actuators driven by chemical energy. The polymer gels prepared here have cyclic chemical reaction networks. With a cyclic reaction, the polymer gels generate periodical motion. The periodic motion of the gel is produced by the chemical energy of the oscillatory Belouzov-Zhabotinsky (BZ reaction. We have succeeded in making synthetic polymer gel move autonomously like a living organism. This experimental fact represents the great possibility of the chemical robot.

  14. Gel electrolytes and electrodes

    Energy Technology Data Exchange (ETDEWEB)

    Fleischmann, Sven; Bunte, Christine; Mikhaylik, Yuriy V.; Viner, Veronika G.

    2017-09-05

    Gel electrolytes, especially gel electrolytes for electrochemical cells, are generally described. In some embodiments, the gel electrolyte layers comprise components a) to c). Component a) may be at least one layer of at least one polymer comprising polymerized units of: a1) at least one monomer containing an ethylenically unsaturated unit and an amido group and a2) at least one crosslinker. Component b) may be at least one conducting salt and component c) may be at least one solvent. Electrodes may comprise the components a), d) and e), wherein component a) may be at least one layer of at least one polymer as described herein. Component d) may be at least one electroactive layer and component e) may be at least one ceramic layer. Furthermore, electrochemical cells comprising component a) which may be at least one layer of at least one polymer as described herein, are also provided.

  15. Active Polymer Gel Actuators

    Directory of Open Access Journals (Sweden)

    Shuji Hashimoto

    2010-01-01

    Full Text Available Many kinds of stimuli-responsive polymer and gels have been developed and applied to biomimetic actuators or artificial muscles. Electroactive polymers that change shape when stimulated electrically seem to be particularly promising. In all cases, however, the mechanical motion is driven by external stimuli, for example, reversing the direction of electric field. On the other hand, many living organisms can generate an autonomous motion without external driving stimuli like self-beating of heart muscles. Here we show a novel biomimetic gel actuator that can walk spontaneously with a wormlike motion without switching of external stimuli. The self-oscillating motion is produced by dissipating chemical energy of oscillating reaction. Although the gel is completely composed of synthetic polymer, it shows autonomous motion as if it were alive.

  16. gonarthrosis; therapy; Karmolis gel.

    Directory of Open Access Journals (Sweden)

    B. V. Zavodovsky

    2014-01-01

    Full Text Available Objective: to evaluate the efficacy, tolerance, and safety of Carmolis topical gel in patients with gonarthrosis. Subjects and methods. The investigation enrolled 60 patients with knee osteoarthrosis (OA who were divided into two groups: 1 40 patients received Carmolis topical gel in addition to nonsteroidal anti-inflammatory drugs (NSAIDs; 2 20 patients took NSAIDS only (a control group. The treatment duration was 2 weeks. In both groups, therapeutic effectiveness was evaluated from changes in the WOMAC index, pain intensity at rest and during movement by the visual analog scale (VAS. The disease activity was also assessed by a physician and a patient (a Likert scale, local swelling and hyperthermia of the affected joint, the efficiency of treatment, and daily needs for NSAIDs were deter- mined. Results. The performed treatment in both patent groups showed positive clinical changes. Combination therapy involving Carmolis gel displayed greater reductions in WOMAC pain and resting and movement pain than in the con- trol group (as assessed by VAS. On completion of the investigation, considerable improvement was, in the physicians' opinion, noted in 38 (95% patients using Carmolis, which coincided with self-evaluations of the patients. During Carmolis application, the starting dose of NSAIDs could be reduced in 18 (45% patients. Adverse reactions occurred infrequently and required no therapy discontinuation. Conclusion. Carmolis topical gel is effective in relieving clinical symptoms in patients with gonarthrosis, well tolerated, and safe, which can recommend its use in the combination treatment of knee OA.

  17. Active Polymer Gel Actuators

    OpenAIRE

    Shuji Hashimoto; Ryo Yoshida; Yusuke Hara; Shingo Maeda

    2010-01-01

    Many kinds of stimuli-responsive polymer and gels have been developed and applied to biomimetic actuators or artificial muscles. Electroactive polymers that change shape when stimulated electrically seem to be particularly promising. In all cases, however, the mechanical motion is driven by external stimuli, for example, reversing the direction of electric field. On the other hand, many living organisms can generate an autonomous motion without external driving stimuli like self-beating of he...

  18. Factors influencing alginate gel biocompatibility.

    Science.gov (United States)

    Tam, Susan K; Dusseault, Julie; Bilodeau, Stéphanie; Langlois, Geneviève; Hallé, Jean-Pierre; Yahia, L'Hocine

    2011-07-01

    Alginate remains the most popular polymer used for cell encapsulation, yet its biocompatibility is inconsistent. Two commercially available alginates were compared, one with 71% guluronate (HiG), and the other with 44% (IntG). Both alginates were purified, and their purities were verified. After 2 days in the peritoneal cavity of C57BL/6J mice, barium (Ba)-gel and calcium (Ca)-gel beads of IntG alginate were clean, while host cells were adhered to beads of HiG alginate. IntG gel beads, however, showed fragmentation in vivo while HiG gel beads stayed firm. The physicochemical properties of the sodium alginates and their gels were thoroughly characterized. The intrinsic viscosity of IntG alginate was 2.5-fold higher than that of HiG alginate, suggesting a greater molecular mass. X-ray photoelectron spectroscopy indicated that both alginates were similar in elemental composition, including low levels of counterions in all gels. The wettabilities of the alginates and gels were also identical, as measured by contact angles of water on dry films. Ba-gel beads of HiG alginate resisted swelling and degradation when immersed in water, much more than the other gel beads. These results suggest that the main factors contributing to the biocompatibility of gels of purified alginate are the mannuronate/guluronate content and/or intrinsic viscosity.

  19. THE PROPERTIES OF CARRAGEENAN GELS

    Directory of Open Access Journals (Sweden)

    Grubnik I.M., Gladukh Ye.V., Chernyaev S.V.

    2012-04-01

    Full Text Available The article presents the results of studies on the functional properties of carrageenan, depending on the concentration of sodium chloride and xanthan in gels. It is established that the main factors in the syneresis of carrageenan gels are its concentration, the presence of ions and gums in solution. If using sodium chloride there is a change in the structure of mesh of the resulting gel, which leads to an increase in syneresis.

  20. Gel polymer electrolytes for batteries

    Science.gov (United States)

    Balsara, Nitash Pervez; Eitouni, Hany Basam; Gur, Ilan; Singh, Mohit; Hudson, William

    2014-11-18

    Nanostructured gel polymer electrolytes that have both high ionic conductivity and high mechanical strength are disclosed. The electrolytes have at least two domains--one domain contains an ionically-conductive gel polymer and the other domain contains a rigid polymer that provides structure for the electrolyte. The domains are formed by block copolymers. The first block provides a polymer matrix that may or may not be conductive on by itself, but that can soak up a liquid electrolyte, thereby making a gel. An exemplary nanostructured gel polymer electrolyte has an ionic conductivity of at least 1.times.10.sup.-4 S cm.sup.-1 at 25.degree. C.

  1. Rheology and structure of milk protein gels

    NARCIS (Netherlands)

    Vliet, van T.; Lakemond, C.M.M.; Visschers, R.W.

    2004-01-01

    Recent studies on gel formation and rheology of milk gels are reviewed. A distinction is made between gels formed by aggregated casein, gels of `pure` whey proteins and gels in which both casein and whey proteins contribute to their properties. For casein' whey protein mixtures, it has been shown th

  2. Rheology and structure of milk protein gels

    NARCIS (Netherlands)

    Vliet, van T.; Lakemond, C.M.M.; Visschers, R.W.

    2004-01-01

    Recent studies on gel formation and rheology of milk gels are reviewed. A distinction is made between gels formed by aggregated casein, gels of `pure` whey proteins and gels in which both casein and whey proteins contribute to their properties. For casein' whey protein mixtures, it has been shown

  3. Nanocrystal/sol-gel nanocomposites

    Science.gov (United States)

    Petruska, Melissa A.; Klimov, Victor L.

    2007-06-05

    The present invention is directed to solid composites including colloidal nanocrystals within a sol-gel host or matrix and to processes of forming such solid composites. The present invention is further directed to alcohol soluble colloidal nanocrystals useful in formation of sol-gel based solid composites.

  4. Sucrose release from polysaccharide gels.

    Science.gov (United States)

    Nishinari, Katsuyoshi; Fang, Yapeng

    2016-05-18

    Sucrose release from polysaccharide gels has been studied extensively because it is expected to be useful in understanding flavour release from solid foods and to find a new processing method which produces more palatable and healthier foods. We provide an overview of the release of sucrose and other sugars from gels of agar and related polysaccharides. The addition of sucrose to agar solutions leads to the increase in transparency of the resulting gels and the decrease in syneresis, which is attributed to the decrease in mesh size in gels. The syneresis occurring in the quiescent condition and fluid release induced by compression is discussed. The relationship between the sugar release and the structural, rheological and thermal properties of gels is also discussed. Finally, the future research direction is proposed.

  5. Electrochemical Light-Emitting Gel

    Directory of Open Access Journals (Sweden)

    Nobuyuki Itoh

    2010-06-01

    Full Text Available Light-emitting gel, a gel state electroluminescence material, is reported. It is composed of a ruthenium complex as the emitter, an ionic liquid as the electrolyte, and oxide nanoparticles as the gelation filler. Emitted light was produced via electrogenerated chemiluminescence. The light-emitting gel operated at low voltage when an alternating current was passed through it, regardless of its structure, which is quite thick. The luminescence property of the gel is strongly affected by nanoparticle materials. TiO2 nanoparticles were a better gelation filler than silica or ZnO was, with respect to luminescence stability, thus indicating a catalytic effect. It is demonstrated that the light-emitting gel device, with quite a simple fabrication process, flashes with the application of voltage.

  6. sol-gel

    Directory of Open Access Journals (Sweden)

    Humberto A. Monreal

    2005-01-01

    Full Text Available En este trabajo sintetizamos nanocilindros de dióxido de titanio de 30 a 400 nm por medio de ADN del plásmido pBR322 de 4,362 pares de bases y el uso de isopropóxido de titanio como precursor por medio del proceso sol-gel. Los geles resultantes fueron calcinados y los polvos caracterizados por medio de Microscopio Electrónico de Barrido (MEB, Espectroscopía de Energía Dispersiva, Microscopio Electrónico de Transmisión (MET y Difracción de Rayos X. Los resultados muestran que la síntesis in vitro de nanorods en presencia de ADN, puede ser activada. Muchas otras moléculas sintéticas pueden producirse por medio del uso de sistemas orgánicos, es así como reportamos la síntesis de híbridos hechos de ácidos nucleicos en materiales inorgánicos que pueden tener diversas aplicaciones en sistemas catalíticos, biomateriales y materiales nanoestructurados.

  7. Mechanical Failure in Colloidal Gels

    Science.gov (United States)

    Kodger, Thomas Edward

    When colloidal particles in a dispersion are made attractive, they aggregate into fractal clusters which grow to form a space-spanning network, or gel, even at low volume fractions. These gels are crucial to the rheological behavior of many personal care, food products and dispersion-based paints. The mechanical stability of these products relies on the stability of the colloidal gel network which acts as a scaffold to provide these products with desired mechanical properties and to prevent gravitational sedimentation of the dispersed components. Understanding the mechanical stability of such colloidal gels is thus of crucial importance to predict and control the properties of many soft solids. Once a colloidal gel forms, the heterogeneous structure bonded through weak physical interactions, is immediately subject to body forces, such as gravity, surface forces, such as adhesion to a container walls and shear forces; the interplay of these forces acting on the gel determines its stability. Even in the absence of external stresses, colloidal gels undergo internal rearrangements within the network that may cause the network structure to evolve gradually, in processes known as aging or coarsening or fail catastrophically, in a mechanical instability known as syneresis. Studying gel stability in the laboratory requires model colloidal system which may be tuned to eliminate these body or endogenous forces systematically. Using existing chemistry, I developed several systems to study delayed yielding by eliminating gravitational stresses through density matching and cyclic heating to induce attraction; and to study syneresis by eliminating adhesion to the container walls, altering the contact forces between colloids, and again, inducing gelation through heating. These results elucidate the varied yet concomitant mechanisms by which colloidal gels may locally or globally yield, but then reform due to the nature of the physical, or non-covalent, interactions which form

  8. Surface grafted chitosan gels. Part II. Gel formation and characterization

    DEFF Research Database (Denmark)

    Liu, Chao; Thormann, Esben; Claesson, Per M.

    2014-01-01

    Responsive biomaterial hydrogels attract significant attention due to their biocompatibility and degradability. In order to make chitosan based gels, we first graft one layer of chitosan to silica, and then build a chitosan/poly(acrylic acid) multilayer using the layer-by-layer approach. After...... cross-linking the chitosan present in the polyelectrolyte multilayer, poly(acrylic acid) is partly removed by exposing the multilayer structure to a concentrated carbonate buffer solution at a high pH, leaving a surface-grafted cross-linked gel. Chemical cross-linking enhances the gel stability against......-linking density. The amount of poly(acrylic acid) trapped inside the surface grafted films was found to decrease with decreasing cross-linking density, as confirmed in situ using TIRR, and ex situ by Fourier transform infrared (FTIR) measurements on dried films. The responsiveness of the chitosan-based gels...

  9. Fluoride Rinses, Gels and Foams

    DEFF Research Database (Denmark)

    Twetman, Svante; Keller, Mette K

    2016-01-01

    AIM: The aim of this conference paper was to systematically review the quality of evidence and summarize the findings of clinical trials published after 2002 using fluoride mouth rinses, fluoride gels or foams for the prevention of dental caries. METHODS: Relevant papers were selected after...... (6 on fluoride mouth rinse, 10 on fluoride gel and 3 on fluoride foam); 6 had a low risk of bias while 2 had a moderate risk. All fluoride measures appeared to be beneficial in preventing crown caries and reversing root caries, but the quality of evidence was graded as low for fluoride mouth rinse......, moderate for fluoride gel and very low for acidulated fluoride foam. No conclusions could be drawn on the cost-effectiveness. CONCLUSIONS: This review, covering the recent decade, has further substantiated the evidence for a caries-preventive effect of fluoride mouth rinse, fluoride gel and foam...

  10. Colloidal gels: Clay goes patchy

    Science.gov (United States)

    Kegel, Willem K.; Lekkerkerker, Henk N. W.

    2011-01-01

    Empty liquids and equilibrium gels have so far been only theoretical possibilities, predicted for colloids with patchy interactions. But evidence of both has now been found in Laponite, a widely studied clay.

  11. Silica reinforced triblock copolymer gels

    DEFF Research Database (Denmark)

    Theunissen, E.; Overbergh, N.; Reynaers, H.

    2004-01-01

    The effect of silica and polymer coated silica particles as reinforcing agents on the structural and mechanical properties of polystyrene-poly(ethylene/butylene)-polystyrene (PS-PEB-PS) triblock gel has been investigated. Different types of chemically modified silica have been compared in order...... a viscoclastic rubber to a plastic fluid and from a plastic fluid to a viscoelastic liquid are shifted to more elevated temperatures when silica is added to the triblock copolymer gel. (C) 2004 Elsevier Ltd. All rights reserved....

  12. Surface grafted chitosan gels. Part II. Gel formation and characterization.

    Science.gov (United States)

    Liu, Chao; Thormann, Esben; Claesson, Per M; Tyrode, Eric

    2014-07-29

    Responsive biomaterial hydrogels attract significant attention due to their biocompatibility and degradability. In order to make chitosan based gels, we first graft one layer of chitosan to silica, and then build a chitosan/poly(acrylic acid) multilayer using the layer-by-layer approach. After cross-linking the chitosan present in the polyelectrolyte multilayer, poly(acrylic acid) is partly removed by exposing the multilayer structure to a concentrated carbonate buffer solution at a high pH, leaving a surface-grafted cross-linked gel. Chemical cross-linking enhances the gel stability against detachment and decomposition. The chemical reaction between gluteraldehyde, the cross-linking agent, and chitosan was followed in situ using total internal reflection Raman (TIRR) spectroscopy, which provided a molecular insight into the complex reaction mechanism, as well as the means to quantify the cross-linking density. The amount of poly(acrylic acid) trapped inside the surface grafted films was found to decrease with decreasing cross-linking density, as confirmed in situ using TIRR, and ex situ by Fourier transform infrared (FTIR) measurements on dried films. The responsiveness of the chitosan-based gels with respect to pH changes was probed by quartz crystal microbalance with dissipation (QCM-D) and TIRR. Highly cross-linked gels show a small and fully reversible behavior when the solution pH is switched between pH 2.7 and 5.7. In contrast, low cross-linked gels are more responsive to pH changes, but the response is fully reversible only after the first exposure to the acidic solution, once an internal restructuring of the gel has taken place. Two distinct pKa's for both chitosan and poly(acrylic acid), were determined for the cross-linked structure using TIRR. They are associated with populations of chargeable groups displaying either a bulk like dissociation behavior or forming ionic complexes inside the hydrogel film.

  13. Thixotropic gel for vadose zone remediation

    Science.gov (United States)

    Riha, Brian D.

    2012-07-03

    A thixotropic gel suitable for use in subsurface bioremediation is provided along with a process of using the gel. The thixotropic gel provides a non-migrating injectable substrate that can provide below ground barrier properties. In addition, the gel components provide for a favorable environment in which certain contaminants are preferentially sequestered in the gel and subsequently remediated by either indigenous or introduced microorganisms.

  14. Thixotropic gel for vadose zone remediation

    Science.gov (United States)

    Rhia, Brian D.

    2011-03-01

    A thixotropic gel suitable for use in subsurface bioremediation is provided along with a process of using the gel. The thixotropic gel provides a non-migrating injectable substrate that can provide below ground barrier properties. In addition, the gel components provide for a favorable environment in which certain contaminants are preferentially sequestered in the gel and subsequently remediated by either indigenous or introduced microorganisms.

  15. Thixotropic gel for vadose zone remediation

    Energy Technology Data Exchange (ETDEWEB)

    Riha, Brian D.; Looney, Brian B.

    2015-10-27

    A thixotropic gel suitable for use in subsurface bioremediation is provided along with a process of using the gel. The thixotropic gel provides a non-migrating injectable substrate that can provide below ground barrier properties. In addition, the gel components provide for a favorable environment in which certain contaminants are preferentially sequestered in the gel and subsequently remediated by either indigenous or introduced microorganisms.

  16. Sol-gel derived sorbents

    Science.gov (United States)

    Sigman, Michael E.; Dindal, Amy B.

    2003-11-11

    Described is a method for producing copolymerized sol-gel derived sorbent particles for the production of copolymerized sol-gel derived sorbent material. The method for producing copolymerized sol-gel derived sorbent particles comprises adding a basic solution to an aqueous metal alkoxide mixture for a pH.ltoreq.8 to hydrolyze the metal alkoxides. Then, allowing the mixture to react at room temperature for a precalculated period of time for the mixture to undergo an increased in viscosity to obtain a desired pore size and surface area. The copolymerized mixture is then added to an immiscible, nonpolar solvent that has been heated to a sufficient temperature wherein the copolymerized mixture forms a solid upon the addition. The solid is recovered from the mixture, and is ready for use in an active sampling trap or activated for use in a passive sampling trap.

  17. Copolymers For Capillary Gel Electrophoresis

    Science.gov (United States)

    Liu, Changsheng; Li, Qingbo

    2005-08-09

    This invention relates to an electrophoresis separation medium having a gel matrix of at least one random, linear copolymer comprising a primary comonomer and at least one secondary comonomer, wherein the comonomers are randomly distributed along the copolymer chain. The primary comonomer is an acrylamide or an acrylamide derivative that provides the primary physical, chemical, and sieving properties of the gel matrix. The at least one secondary comonomer imparts an inherent physical, chemical, or sieving property to the copolymer chain. The primary and secondary comonomers are present in a ratio sufficient to induce desired properties that optimize electrophoresis performance. The invention also relates to a method of separating a mixture of biological molecules using this gel matrix, a method of preparing the novel electrophoresis separation medium, and a capillary tube filled with the electrophoresis separation medium.

  18. Screening effect on nanostructure of charged gel

    DEFF Research Database (Denmark)

    Sugiyama, M; Annaka, M; Hino, M

    2004-01-01

    Charge screening effects on nanostructures of N-isopropylacrylamide-sodium acrylate (NIPA-SA) and -acrylic acid (NIPA-AAc) gels are investigated with small-angle neutron scattering. The NIPA-SA and NIPA-AAc gels with low water content exhibit microphase separations with different dimensions....... The dehydrated NIPA-SA gel also makes the microphase separation but the dehydrated NIPA-AAc gel does not. These results indicate that ionic circumstance around charged bases strongly affects the nanostructures both of the dehydrated gel and the gel with low water content. (C) 2004 Elsevier B. V. All rights...

  19. Physicochemical behaviour of chitin gels.

    Science.gov (United States)

    Vachoud, L; Zydowicz, N; Domard, A

    2000-06-30

    Syneresis of chitin gels formed in the course of N-acetylation of chitosan in hydroalcoholic media has been studied. A critical cross-linking density related to a critical acetylation degree for which the gel undergoes weak syneresis and swells in water was shown (degree of acetylation (DA) 88%). Above this value, the weight loss during syneresis increases with DA. Conversely, syneresis decreases on increasing the polymer concentration, but disappears at a macroscopic level for a polymer concentration close to the critical concentration of entanglement in the initial solution. An increase in temperature favours the formation of hydrophobic interactions and new inter- and intramolecular hydrogen bondings. Due to the weak polyelectrolyte character of chitin, the weight of the gel depends on the pH and ionic strength of the media. Swelling-deswelling experiments show that the swelling of the gel is not fully reversible in relation with the formation of new cross-links during the depletion of the network. Our results reveals that the balance between segment-segment and segment-solvent interactions as well as the molecular mobility play the major role.

  20. Fluoride Rinses, Gels and Foams

    DEFF Research Database (Denmark)

    Twetman, Svante; Keller, Mette K

    2016-01-01

    AIM: The aim of this conference paper was to systematically review the quality of evidence and summarize the findings of clinical trials published after 2002 using fluoride mouth rinses, fluoride gels or foams for the prevention of dental caries. METHODS: Relevant papers were selected after an el...... brushing with fluoride toothpaste....

  1. Nonlinear elasticity of alginate gels

    Science.gov (United States)

    Hashemnejad, Seyed Meysam; Kundu, Santanu

    Alginate is a naturally occurring anionic polysaccharide extracted from brown algae. Because of biocompatibility, low toxicity, and simple gelation process, alginate gels are used in biomedical and food applications. Here, we report the rheological behavior of ionically crosslinked alginate gels, which are obtained by in situ gelation of alginates with calcium salts, in between two parallel plates of a rheometer. Strain stiffening behavior was captured using large amplitude oscillatory shear (LAOS) experiments. In addition, negative normal stress was observed for these gels, which has not been reported earlier for any polysaccharide networks. The magnitude of negative normal stress increases with applied strain and can exceed that of the shear stress at large strain. Rheological results fitted with a constitutive model that considers both stretching and bending of chains indicate that nonlinearity is likely related to the stretching of the chains between the crosslink junctions. The results provide an improved understanding of the deformation mechanism of ionically crosslinked alginate gel and the results will be important in developing synthetic extracellular matrix (ECM) from these materials.

  2. Yield stress determination of a physical gel

    DEFF Research Database (Denmark)

    Hvidt, Søren

    2013-01-01

    Pluronic F127 solutions form gels in water with high elastic moduli. Pluronic gels can, however, only withstand small deformations and stresses. Different steady shear and oscillatory methods traditionally used to determine yield stress values are compared. The results show that the yield stresses...... values of these gels depend on test type and measurement time, and no absolute yield stress value can be determined for these physical gels....

  3. Hybrid Materials of Polymer Gels with Surfactants

    Institute of Scientific and Technical Information of China (English)

    Hu Yan; Kaoru Tsujii

    2005-01-01

    @@ 1 Introduction Polymer gels have been extensively studied[1~17] since the discovery of volume phase-transition of a gel by Tanaka[1~5]. As a unique soft material, gels attract much attention and are tried to be applied for drug-delivery systgems[6], actuators or chemo-mechanical devices[7~9] and so on. In particular, controlled-release of small molecules from a gel is now a subject of special interest[10].

  4. Study of Fricke gel dosimeter response for different gel quality

    Science.gov (United States)

    Cavinato, C. C.; Campos, L. L.

    2010-11-01

    The Fricke xylenol gel (FXG) dosimeter has been studied for application in radiotherapy because it is capable of to measure the spatial distribution of radiation doses. The dosimetry is based on the oxidation of ferrous (Fe2+) to ferric (Fe3+) ions radiation induced, related to the radiation dose. The gel material usually employed is the 300 Bloom gelatin, which is imported and very expensive in Brazil. Aiming to analyze the viability of to use a locally produced and low cost gel material, in this work the spectrophotometric responses of FXG solutions prepared using 270 Bloom gelatin commercially available and 300 Bloom gelatin imported were compared. The absorption spectra of solutions prepared with 5% by weight 270 and 300 Bloom gelatins non-irradiated and irradiated with 60Co gamma radiation in the dose range between 0.5 and 100 Gy were analysed, the dose-response curves were evaluated and the useful dose range was established. The obtained results indicate that the FXG solution prepared with 270 Bloom gelatin presents good performance, similar to that presented by the FXG solution prepared with 300 Bloom gelatin and its use can be recommended owing to the low cost and the availability in local market.

  5. 21 CFR 520.1452 - Moxidectin gel.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Moxidectin gel. 520.1452 Section 520.1452 Food and..., FEEDS, AND RELATED PRODUCTS ORAL DOSAGE FORM NEW ANIMAL DRUGS § 520.1452 Moxidectin gel. (a) Specifications. Each milliliter of gel contains 20 milligrams (2 percent) moxidectin. (b) Sponsor. See No....

  6. 21 CFR 866.4900 - Support gel.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Support gel. 866.4900 Section 866.4900 Food and... IMMUNOLOGY AND MICROBIOLOGY DEVICES Immunology Laboratory Equipment and Reagents § 866.4900 Support gel. (a) Identification. A support gel for clinical use is a device that consists of an agar or agarose preparation...

  7. Permeability of gels is set by the impulse applied on the gel

    NARCIS (Netherlands)

    Urbonaite, V.; Jongh, de H.H.J.; Linden, van der E.; Pouvreau, L.A.M.

    2015-01-01

    To better understand sensory perception of foods, water exudation studies on protein-based gels are of a high importance. It was aimed to study the interplay of gel coarseness and gel stiffness on water holding (WH) and water flow kinetics from the gel once force is applied onto the material. Ovalbu

  8. Fluoride Rinses, Gels and Foams

    DEFF Research Database (Denmark)

    Twetman, Svante; Keller, Mette K

    2016-01-01

    AIM: The aim of this conference paper was to systematically review the quality of evidence and summarize the findings of clinical trials published after 2002 using fluoride mouth rinses, fluoride gels or foams for the prevention of dental caries. METHODS: Relevant papers were selected after...... an electronic search for literature published in English between 2003 and 2014. The included papers were assessed for their risk of bias and the results were narratively synthesized due to study heterogeneity. The quality of evidence was expressed according to GRADE. RESULTS: A total of 19 papers were included...... (6 on fluoride mouth rinse, 10 on fluoride gel and 3 on fluoride foam); 6 had a low risk of bias while 2 had a moderate risk. All fluoride measures appeared to be beneficial in preventing crown caries and reversing root caries, but the quality of evidence was graded as low for fluoride mouth rinse...

  9. Gel dosimetry for conformal radiotherapy

    Energy Technology Data Exchange (ETDEWEB)

    Gambarini, G. [Department of Physics of the University and INFN, Milan (Italy)]. e-mail: grazia.gambarini@mi.infn.it

    2005-07-01

    With the continuum development of conformal radio therapies, aimed at delivering high dose to tumor tissue and low dose to the healthy tissue around, the necessities has appeared of suitable improvement of dosimetry techniques giving the possibility of obtaining dose images to be compared with diagnostic images. Also if wide software has been developed for calculating dose distributions in the fields of various radiotherapy units, experimental verifications are necessary, in particular in the case of complex geometries in conformal radiotherapy. Gel dosimetry is a promising method for imaging the absorbed dose in tissue-equivalent phantoms, with the possibility of 3D reconstruction of the spatial dose distribution, with milli metric resolution. Optical imaging of gel dosimeters, based on visible light absorbance analysis, has shown to be a reliable technique for achieving dose distributions. (Author)

  10. Sol-gel derived ceramics

    OpenAIRE

    1990-01-01

    The synthesis of ceramic raw materials has become an important factor in ceramic technologies. The increasing demands to the performance of ceramic compounds has caused increased activities for the preparation of tailor-made raw materials. Amongst a variety of new syntheses like flame pyrolysis, reactive spray drying, plasma or laser assisted techniques, the sol-gel process plays an important and increasing role. The process describes the building up of an inorganic (in general an oxide) netw...

  11. The Sol-Gel Process

    OpenAIRE

    Khalid Suliman Aboodh

    2015-01-01

    Abstract An increasingly important application of liquid jets is the disintegration of the jet to form droplets of liquid containing nuclear fuel. These droplets are then dried and sintered to form ceramic micro spheres for use in fuel elements in nuclear reactors. The total operations required to form the droplets convert them to solids and fire them to ceramic bodies comprise what are known as Sol-Gel processes Reference 13.

  12. The gel electrophoresis markup language (GelML) from the Proteomics Standards Initiative.

    Science.gov (United States)

    Gibson, Frank; Hoogland, Christine; Martinez-Bartolomé, Salvador; Medina-Aunon, J Alberto; Albar, Juan Pablo; Babnigg, Gyorgy; Wipat, Anil; Hermjakob, Henning; Almeida, Jonas S; Stanislaus, Romesh; Paton, Norman W; Jones, Andrew R

    2010-09-01

    The Human Proteome Organisation's Proteomics Standards Initiative has developed the GelML (gel electrophoresis markup language) data exchange format for representing gel electrophoresis experiments performed in proteomics investigations. The format closely follows the reporting guidelines for gel electrophoresis, which are part of the Minimum Information About a Proteomics Experiment (MIAPE) set of modules. GelML supports the capture of metadata (such as experimental protocols) and data (such as gel images) resulting from gel electrophoresis so that laboratories can be compliant with the MIAPE Gel Electrophoresis guidelines, while allowing such data sets to be exchanged or downloaded from public repositories. The format is sufficiently flexible to capture data from a broad range of experimental processes, and complements other PSI formats for MS data and the results of protein and peptide identifications to capture entire gel-based proteome workflows. GelML has resulted from the open standardisation process of PSI consisting of both public consultation and anonymous review of the specifications.

  13. Gel fire suppressants for controlling underground heating

    Institute of Scientific and Technical Information of China (English)

    HU Sheng-gen; XUE Sheng

    2011-01-01

    One of the major safety issues in coal mining is heatings and the resultant spontaneous combustion in underground coal mines.CSIRO researchers have developed a number of polymer gels suitable for controlling heatings in coal mines.These gels were developed to meet strict selection criteria including easy preparation,no or low toxicity,controllable gelation time,adaptable to mine water chemistry,adjustable viscosity,relatively long gel life,thermally and chemically stable and low cost.The HPAM-Aluminum Citrate gel system was identified to be the most favourable gel system for fire suppression in underground coal mines.These gels can be applied to the areas undergoing coal heating or gas leakage at a controllable gelation time and impermeable gel barriers can be formed in the areas to block ingress of air.

  14. Consolidation of Inorganic Precipitated Silica Gel

    Directory of Open Access Journals (Sweden)

    Matthias Kind

    2011-08-01

    Full Text Available Colloidal gels are possible intermediates in the generation of highly porous particle systems. In the production process the gels are fragmented after their formation. These gel fragments compact to particles whose application-technological properties are determined by their size and porosity. In the case of precipitated silica gels, this consolidation process depends on temperature and pH, among other parameters. It is shown that these dependencies can be characterized by oedometer measurements. Originally, the oedometer test (one-dimensional compression test stemmed from soil mechanics. It has proven to be an interesting novel examination method for gels. Quantitative data of the time-dependent shrinkage of gel samples can be obtained. The consolidation of the gels shows a characteristic dependence on the above parameters.

  15. PEMANFAATAN LIMBAH SEKAM PADI MENJADI SILIKA GEL

    Directory of Open Access Journals (Sweden)

    Prima Astuti Handayani

    2014-12-01

    Full Text Available Sekam padi merupakan salah satu sumber penghasil silika terbesar, berpotensi sebagai bahan pembuatan silika gel. Abu sekam padi mengandung silika sebanyak 87%-97% berat kering. Sintesis silika gel dari abu sekam padi dilakukan dengan mereaksikan abu sekam padi menggunakan larutan NaOH 1N pada suhu 800C selama 1 jam dan dilanjutkan dengan penambahan larutan asam hingga pH=7. Gel yang dihasilkan selanjutnya didiamkan selama 18 jam kemudian dikeringkan pada suhu dikeringkan menggunakan oven pada suhu 800C hingga beratnya konstan. Hasil percobaan diperoleh bahwa silika gel dengan penambahan CH3COOH menghasilkan yield yang lebih besar dibandingkan penambahan HCl. Berdasarkan analisis FT-IR silika gel yang diperoleh memiliki gugus Si-O-Si dan gugus Si-OH. Silika gel dengan penambahan HCl memiliki surface area sebesar 65,558 m2/g, total pore volume 0,1935 cc/g, dan average pore size sebesar 59,0196 Å. Sedangkan silika gel dengan penambahan CH3COOH memiliki surface area sebesar 9,685 m2/g, total pore volume 0,02118 cc/g, dan average pore size sebesar 43,7357Å. Silika gel dengan penambahanCH3COOH memiliki kemampuan menyerap kelembaban udara yang lebih baik dibanding silika gel dengan penambahan HCl. Rice hull ash (RHA is one of the biggest source of silica, potential for sintesis silica gel. RHA contains silica as many as 87 % -97 %. Synthesis of silica gel from rice hull ash was done by reaction using NaOH solution at temperature 800C for 1 hour and followed by the addition of an acid solution until pH=7. The gel were rested with time aging 18 hour, and then dried using oven at temperature 800C until constant weigh. The results obtained that the silica gel with the addition of CH3COOH produce higher yields than the addition of HCl. Based on FT-IR analysis, silica gel has a group of silanol (Si-`OH and siloxan (Si-O-Si group. Silica gel with the addition of HCl has a surface area 65,558 m2/g, a total pore volume 0,1935 cc/g, and average pore size 59

  16. Metal-silica sol-gel materials

    Science.gov (United States)

    Stiegman, Albert E. (Inventor)

    2002-01-01

    The present invention relates to a single phase metal-silica sol-gel glass formed by the co-condensation of a transition metal with silicon atoms where the metal atoms are uniformly distributed within the sol-gel glass as individual metal centers. Any transition metal may be used in the sol-gel glasses. The present invention also relates to sensor materials where the sensor material is formed using the single phase metal-silica sol-gel glasses. The sensor materials may be in the form of a thin film or may be attached to an optical fiber. The present invention also relates to a method of sensing chemicals using the chemical sensors by monitoring the chromatic change of the metal-silica sol-gel glass when the chemical binds to the sensor. The present invention also relates to oxidation catalysts where a metal-silica sol-gel glass catalyzes the reaction. The present invention also relates to a method of performing oxidation reactions using the metal-silica sol-gel glasses. The present invention also relates to organopolymer metal-silica sol-gel composites where the pores of the metal-silica sol-gel glasses are filled with an organic polymer polymerized by the sol-gel glass.

  17. Sol-gel electrochromic device

    OpenAIRE

    1994-01-01

    All solid state electrochromic devices have potential applications in architectural and automotive fields to regulate the transmission and reflection of radiant energy. We present the optical and electrochemical characteristics of two solid state windows having the configuration glass/ITO/TiO2-CeO2/TiO2/TiO2-CeO2/ITO/glass and glass/ITO/WOa/TiO2/TiO2-CeO2/ITO/glass where the three internal layers have been prepared by sol gel methods. The preparation of the individual sols and some physical p...

  18. Motility initiation in active gels

    CERN Document Server

    Recho, Pierre; Truskinovsky, Lev

    2015-01-01

    Motility initiation in crawling cells requires a symmetry breaking mechanism which transforms a symmetric state into a polarized state. Experiments on keratocytes suggest that polarization is triggered by increased contractility of motor proteins. In this paper we argue that contraction can be responsible not only for the symmetry breaking transition but also for the incipient translocation of the segment of an active gel mimicking the crawling cell. Our model suggests that when the contractility increases sufficiently far beyond the motility initiation threshold, the cell can stop and re-symmetrizes. The proposed theory reproduces the motility initiation pattern in fish keratocytes and the behavior of keratocytes prior to cell division.

  19. Active Gel Model of Amoeboid Cell Motility

    CERN Document Server

    Callan-Jones, A C

    2013-01-01

    We develop a model of amoeboid cell motility based on active gel theory. Modeling the motile apparatus of a eukaryotic cell as a confined layer of finite length of poroelastic active gel permeated by a solvent, we first show that, due to active stress and gel turnover, an initially static and homogeneous layer can undergo a contractile-type instability to a polarized moving state in which the rear is enriched in gel polymer. This agrees qualitatively with motile cells containing an actomyosin-rich uropod at their rear. We find that the gel layer settles into a steadily moving, inhomogeneous state at long times, sustained by a balance between contractility and filament turnover. In addition, our model predicts an optimal value of the gel-susbstrate adhesion leading to maximum layer speed, in agreement with cell motility assays. The model may be relevant to motility of cells translocating in complex, confining environments that can be mimicked experimentally by cell migration through microchannels.

  20. Self-Pumping Active Gel

    Science.gov (United States)

    Wu, Kun-Ta; Hishamunda, Jean Bernard; Fraden, Seth; Dogic, Zvonimir

    Isotropic active gels are the network which is consist of cross-linked building blocks and the structure of which changes randomly and isotropically with time. Dogic et. al. show that pairs of anti-parallel microtubules form extensile bundles, which merge, extend, and buckle. In an unconfined system, the dynamics of these bundles causes spontaneous turbulent-like flow driven by motion of microscopic molecular motors. We found that confining these active gels in a millimeter sized toroids causes a transition into a new dynamical state characterized by circulation currents persisting for hours until ATP is depleted. We show how toroid dimensions impact the properties of self-organized circular currents, how directions of circulation can be designed by engineering ratchet-shaped boundaries, and how circulations of connected toroids can be either synchronized or antisynchronized. Furthermore, we demonstrate that the flow rate in the circulation is independent of curvature and length of flow path. The flow rate persists for centimeters without decay, disregarding conventional pipe flow resistance. Such findings pave the path to self-pumping pipe transport and performing physical work with biological system.

  1. Gel trapping of dense colloids.

    Science.gov (United States)

    Laxton, Peter B; Berg, John C

    2005-05-01

    Phase density differences in sols, foams, or emulsions often lead to sedimentation or creaming, causing problems for materials where spatial uniformity over extended periods of time is essential. The problem may be addressed through the use of rheology modifiers in the continuous phase. Weak polymer gels have found use for this purpose in the food industry where they appear to be capable of trapping dispersoid particles in a three-dimensional matrix while displaying water-like viscosities at low shear. Attempts to predict sedimentation stability in terms of particle properties (size, shape, density difference) and gel yield stress have led to qualitative success for suspensions of large particles. The effect of particle size, however, in particular the case in which colloidal dimensions are approached, has not been investigated. The present work seeks to determine useful stability criteria for colloidal dispersions in terms of readily accessible viscoelastic descriptors. Results are reported for systems consisting of 12 microm poly(methyl methacrylate) (PMMA) spheres dispersed in aqueous gellan gum. Monovalent salt concentration is varied to control rheological properties, and sedimentation/centrifugation experiments are performed to determine dispersion stability. Necessary conditions for stability consist of a minimum yield stress together with a value of tan delta less than unity.

  2. Characteristics of polyacrylamide gel with THPC and Turnbull Blue gel dosimeters evaluated using optical tomography

    Science.gov (United States)

    Pilařová (Vávrů), Kateřina; Kozubíková, Petra; Šolc, Jaroslav; Spěváček, Václav

    2014-11-01

    The purpose of this study was to compare characteristics of radiochromic gel - Turnbull Blue gel (TB gel) with polymer gel - polyacrylamide gel and tetrakis hydroxymethyl phosphonium chloride (PAGAT) using optical tomography. Both types of gels were examined in terms of dose sensitivity, dose response linearity and background value of spectrophotometric absorbance. The calibration curve was obtained for 60Co irradiation performed on Gammacell 220 at predefined gamma dose levels between 0 and 140 Gy for TBG and 0-15 Gy for PAGAT. To measure relative dose distributions from stereotactic irradiation, dosimeters were irradiated on Leksell Gamma Knife Perfexion. The cylindrical glass housings filled with gel were attached to the stereotactic frame. They were exposed with single shot and 16 mm collimator by 65 Gy to a 50% prescription isodose for TB gel and 4 Gy to a 50% prescription isodose for PAGAT. Evaluations of dosimeters were performed on an UV-vis Spectrophotometer Helios β and an optical cone beam homemade tomography scanner with a 16-bit astronomy CCD camera with a set of color filters. The advantages and potential disadvantages for both types of gel dosimeters were summarized. Dose distribution in central slice and measured profiles of 16 mm shot shows excellent correspondence with treatment planning system Leksell GammaPlan® for both PAGAT and Turnbull Blue gels. Gel dosimeters are suitable for steep dose gradient verification. An optical tomography evaluation method is successful. Dose response characteristics of TB gel and PAGAT gel are presented.

  3. Gel time of calcium acrylate grouting material

    Institute of Scientific and Technical Information of China (English)

    韩同春

    2004-01-01

    Calcium acrylate is a polymerized grout, and can polymerize in an aqueous solution. The polymerizationreaction utilizes ammonium persulfate as a catalyst and sodium thiosulfate as the activator. Based on the theory of reactionkinetics, this study on the relation between gel time and concentration of activator and catalyst showed that gel time ofcalcium acrylate is inversely proportional to activator and catalyst concentration. A formula of gel time is proposed, and anexample is provided to verify the proposed formula.

  4. Gel time of calcium acrylate grouting material

    Institute of Scientific and Technical Information of China (English)

    韩同春

    2004-01-01

    Calcium acrylate is a polymerized grout, and can polymerize in an aqueous solution. The polymerization reaction utilizes ammonium persulfate as a catalyst and sodium thiosulfate as the activator. Based on the theory of reaction kinetics, this study on the relation between gel time and concentration of activator and catalyst showed that gel time of calcium acrylate is inversely proportional to activator and catalyst concentration. A formula of gel time is proposed, and an example is provided to verify the proposed formula.

  5. Stabilized aqueous gels and uses thereof

    Energy Technology Data Exchange (ETDEWEB)

    Swanson, B.L.

    1978-08-29

    New improved aqueous gels, and methods of using same in contacting subterranean formations, are provided. The gels are prepared by gelling an aqueous brine having incorporated therein a water-soluble cellulose ether such as a carboxymethylcellulose (CMC), and are rendered more stable to decomposition by incorporating a sulfoalkylated tannin stabilizing agent, such as a sulfomethylated quebracho (SMQ), in the gel during the preparation thereof.

  6. Buckling Instability in Liquid Crystalline Physical Gels

    OpenAIRE

    Verduzco, Rafael; Meng, Guangnan; Kornfield, Julia A; Meyer, Robert B.

    2006-01-01

    In a nematic gel we observe a low-energy buckling deformation arising from soft and semisoft elastic modes. We prepare the self-assembled gel by dissolving a coil–side-group liquid-crystalline polymer–coil copolymer in a nematic liquid crystal. The gel has long network strands and a precisely tailored structure, making it ideal for studying nematic rubber elasticity. Under polarized optical microscopy we observe a striped texture that forms when gels uniformly aligned at 35 °C are cooled to r...

  7. Conducting polymer electrodes for gel electrophoresis.

    Science.gov (United States)

    Bengtsson, Katarina; Nilsson, Sara; Robinson, Nathaniel D

    2014-01-01

    In nearly all cases, electrophoresis in gels is driven via the electrolysis of water at the electrodes, where the process consumes water and produces electrochemical by-products. We have previously demonstrated that π-conjugated polymers such as poly(3,4-ethylenedioxythiophene) (PEDOT) can be placed between traditional metal electrodes and an electrolyte to mitigate electrolysis in liquid (capillary electroosmosis/electrophoresis) systems. In this report, we extend our previous result to gel electrophoresis, and show that electrodes containing PEDOT can be used with a commercial polyacrylamide gel electrophoresis system with minimal impact to the resulting gel image or the ionic transport measured during a separation.

  8. Food gels: gelling process and new applications.

    Science.gov (United States)

    Banerjee, Soumya; Bhattacharya, Suvendu

    2012-01-01

    Food gels are viscoelastic substances and several gelled products are manufactured throughout the world. The gelling agents in foods are usually polysaccharides and proteins. In food gels, the polymer molecules are not cross-linked by covalent bonds with the exception of disulphide bonds in some protein gels. Instead, the molecules are held together by a combination of weak inter-molecular forces like hydrogen bonds, electrostatic forces, Van der Waals forces, and hydrophobic interactions. Polysaccharides including hydrocolloids are strongly hydrated in aqueous medium but they tend to have less ordered structures. The mechanism of gelation depends on the nature of the gelling agent(s) and on the conditions of gel formation like the temperature, the presence of ions, the pH, and the concentration of gelling agents, etc. Characterization of gels can be performed in several ways of which rheological measurements are frequently practiced. Multi-component or mixed gel system is an important area of interest in which two or more gelling components are simultaneously used to achieve certain specific structural and functional characteristics. We here discuss about the different gels and gelling agents, the characterization of gels, and the mechanism of gelation with an emphasis on mixed or multi-component gels that would have significant commercial applications.

  9. Conducting polymer electrodes for gel electrophoresis.

    Directory of Open Access Journals (Sweden)

    Katarina Bengtsson

    Full Text Available In nearly all cases, electrophoresis in gels is driven via the electrolysis of water at the electrodes, where the process consumes water and produces electrochemical by-products. We have previously demonstrated that π-conjugated polymers such as poly(3,4-ethylenedioxythiophene (PEDOT can be placed between traditional metal electrodes and an electrolyte to mitigate electrolysis in liquid (capillary electroosmosis/electrophoresis systems. In this report, we extend our previous result to gel electrophoresis, and show that electrodes containing PEDOT can be used with a commercial polyacrylamide gel electrophoresis system with minimal impact to the resulting gel image or the ionic transport measured during a separation.

  10. Stacking gels: A method for maximising output for pulsed-field gel electrophoresis

    Directory of Open Access Journals (Sweden)

    Heng See

    2009-01-01

    Full Text Available Pulsed field gel electrophoresis (PFGE, the gold standard of molecular typing methods, has a major disadvantage of an unusually long electrophoretic time. From the original protocol of 6 days, it was modified to 3 days and subsequently to a single day. We describe the procedure of stacking five to six gels one on top of another in order to increase and maximize the output in a shorter time without compromising the resolution and reproducibility. All the variables that affect pulsed field gels during electrophoresis were taken into consideration. We firstly optimized the parameters to be used and secondly determined whether stacking of five to six gels had any effect on the molecular separation during electrophoresis in comparison with a single gel run. DNA preparation, restriction, electrophoresis, staining and gel documentation was carried out based on previously published methods. Gels were analysed using BioNumerics and dice coefficient and unweighted pair group methods were used to generate dendrograms based on 1.5% tolerance values. Identical band profiles and band resolution-separation were seen in the PFGE patterns with single gel and multiple stacking gels. Cluster analysis further strengthened the fact that results from stacking gels were reproducible and comparable with a single gel run. This method of stacking gels saves time and maximizes the output at the same time. The run time for a single gel was about 28 hours, but with six stacked gels the run time was 54 hours compared with 28 x 6 = 168 hours if they were run separately as single gels thus saving time of 67.86%. Beside the big factor of saving time, stacking gels save resources (electricity, reagents, water, chemicals and working time by increasing the sample throughput in a shorter time without compromising on quality of data. But optimization of working parameters is vital depending on the PFGE system used.

  11. High internal phase emulsion gels (HIPE-gels) created through assembly of natural oil bodies

    NARCIS (Netherlands)

    Nikiforidis, C.V.; Scholten, E.

    2015-01-01

    A natural emulsion was used to create a high internal phase emulsion (HIPE) gel with elastic properties, indicated by shear elastic moduli between 102 and 105 Pa. The elasticity of the gel network was provided from a 2D-gel network of proteins which were naturally adsorbed at the interface of an oil

  12. Categorization of rheological scaling models for particle gels applied to casein gels

    NARCIS (Netherlands)

    Mellema, M.; Opheusden, van J.H.J.; Vliet, van T.

    2002-01-01

    Rennet-induced casein gels made from skim milk were studied rheologically. A scaling model or framework for describing the rheological behavior of gels is discussed and used for classification of the structure of casein gels. There are two main parameters in the model that describe the number of def

  13. Viscoelastic Properties of Vitreous Gel

    Science.gov (United States)

    Pirouz Kavehpour, H.; Sharif-Kashani, Pooria

    2010-11-01

    We studied the rheological properties of porcine vitreous humor using a stressed-control shear rheometer. All experiments were performed in a closed environment at body temperature to mimic in-vivo conditions. We modeled the creep deformation using a two-element retardation spectrum model. By associating each element of the model to an individual biopolymeric system in the vitreous gel, a separate response to the applied stress was obtained from each component. The short time scale was associated with the collagen structure, while the longer time scale was related to the microfibrilis and hyaluronan network. We were able to distinguish the role of each main component from the overall rheological properties. Knowledge of this correlation enables us to relate the physical properties of vitreous to its pathology, as well as optimize surgical procedures such as vitrectomy.

  14. Chitosan: Gels and Interfacial Properties

    Directory of Open Access Journals (Sweden)

    Julie Nilsen-Nygaard

    2015-03-01

    Full Text Available Chitosan is a unique biopolymer in the respect that it is abundant, cationic, low-toxic, non-immunogenic and biodegradable. The relative occurrence of the two monomeric building units (N-acetyl-glucosamine and d-glucosamine is crucial to whether chitosan is predominantly an ampholyte or predominantly a polyelectrolyte at acidic pH-values. The chemical composition is not only crucial to its surface activity properties, but also to whether and why chitosan can undergo a sol–gel transition. This review gives an overview of chitosan hydrogels and their biomedical applications, e.g., in tissue engineering and drug delivery, as well as the chitosan’s surface activity and its role in emulsion formation, stabilization and destabilization. Previously unpublished original data where chitosan acts as an emulsifier and flocculant are presented and discussed, showing that highly-acetylated chitosans can act both as an emulsifier and as a flocculant.

  15. Using Greener Gels to Explore Rheology

    Science.gov (United States)

    Garrett, Brendan; Matharu, Avtar S.; Hurst, Glenn A.

    2017-01-01

    A laboratory experiment was developed to investigate the rheological properties of a green calcium-cross-linked alginate gel as an alternative to the traditional borax-cross-linked poly(vinyl alcohol) gel. As borax is suspected of damaging fertility and the unborn child, a safe, green alternative is necessary. The rheological properties of a…

  16. Halogen-bonding-triggered supramolecular gel formation.

    Science.gov (United States)

    Meazza, Lorenzo; Foster, Jonathan A; Fucke, Katharina; Metrangolo, Pierangelo; Resnati, Giuseppe; Steed, Jonathan W

    2013-01-01

    Supramolecular gels are topical soft materials involving the reversible formation of fibrous aggregates using non-covalent interactions. There is significant interest in controlling the properties of such materials by the formation of multicomponent systems, which exhibit non-additive properties emerging from interaction of the components. The use of hydrogen bonding to assemble supramolecular gels in organic solvents is well established. In contrast, the use of halogen bonding to trigger supramolecular gel formation in a two-component gel ('co-gel') is essentially unexplored, and forms the basis for this study. Here, we show that halogen bonding between a pyridyl substituent in a bis(pyridyl urea) and 1,4-diiodotetrafluorobenzene brings about gelation, even in polar media such as aqueous methanol and aqueous dimethylsulfoxide. This demonstrates that halogen bonding is sufficiently strong to interfere with competing gel-inhibitory interactions and create a 'tipping point' in gel assembly. Using this concept, we have prepared a halogen bond donor bis(urea) gelator that forms co-gels with halogen bond acceptors.

  17. Recrystallization of amylopectin in concentrated starch gels

    NARCIS (Netherlands)

    Keetels, CJAM; Oostergetel, GT; vanVliet, T

    1996-01-01

    The relation between the recrystallization of amylopectin and the increase in stiffness of starch gels during storage was studied by various techniques. From transmission electron microscopy it was concluded that the size of the crystalline domains in retrograded 30% w/w potato starch gels was about

  18. Cd(II) Speciation in alginate gels

    NARCIS (Netherlands)

    Davis, T.A.; Kalis, E.J.J.; Pinheiro, J.P.; Town, R.M.; Leeuwen, van H.P.

    2008-01-01

    Polysaccharides, such as those occurring in cell walls and biofilms, play an important role in metal speciation in natural aqueous systems. This work describes the speciation of Cd(II) in alginate gels chosen as a model system for biogels. The gels are formed by bridging calcium ions at junction zon

  19. Serum release boosts sweetness intensity in gels

    NARCIS (Netherlands)

    Sala, G.; Stieger, M.A.; Velde, van de F.

    2010-01-01

    This paper describes the effect of serum release on sweetness intensity in mixed whey protein isolate/gellan gum gels. The impact of gellan gum and sugar concentration on microstructure, permeability, serum release and large deformation properties of the gels was determined. With increasing gellan

  20. Stiffening in gels containing whey protein isolate

    NARCIS (Netherlands)

    Purwanti, N.; Veen, van der E.; Goot, van der A.J.; Boom, R.M.

    2013-01-01

    Gels made only from whey protein isolate (WPI) stiffened over the first few days of storage, after which the textural properties remained nearly constant. However, protein gels containing WPI microparticles, at the same total protein content, stiffened over a longer period than those without micropa

  1. Responsive molecular gels. : Surface Chemistry and Colloids

    NARCIS (Netherlands)

    de Jong, Jaap J. D.; Feringa, Bernard; van Esch, Jan

    2006-01-01

    A review discusses the chemo-responsive gels and physico-responsive gels. Phys. low mol. mass responsive gelators are interesting mols. with many potential applications in areas such as catalysis, sensor and sepn. technol., drug delivery, and biomedicine. In a relatively short period, a wide variety

  2. Flow of colloidal suspensions and gels

    Science.gov (United States)

    Zia, Roseanna

    Our recent studies of yield of colloidal gels under shear show that yield in such gels occurs in distinct stages. Under fixed stress, yield follows a finite delay period of slow solid-like creep. Post yield, the gel fluidizes and may undergo long-time viscous flow or, in some cases, may re-solidify. Under imposed strain rate, the transition from equilibrium to long-time flow is characterized by one or more stress overshoots, signifying a yield process here as well. These rheological changes are accompanied by evolution in morphology and dynamics of the gel network. Similar regimes have been observed in gels subjected to gravitational forcing; the gel initially supports its own weight, or perhaps undergoes slow, weak compaction. This may be followed by a sudden transition to rapid compaction or sedimentation. Various models have been put forth to explain these behaviors based on structural evolution, but this detail is difficult to observe in experiment. Here we examine the detailed microstructural evolution and rheology of reversible colloidal gels as they deform under gravity, identifying the critical buoyant force at which yield occurs, the role played by ongoing gel coarsening, and similarities and differences compared to yield under shear. We gratefully acknowledge the support of the NSF XSEDE Computational Resource, the NSF Early CAREER Program, and the Office of Naval Research Young Investigator Program.

  3. Responsive molecular gels. : Surface Chemistry and Colloids

    NARCIS (Netherlands)

    de Jong, Jaap J. D.; Feringa, Bernard; van Esch, Jan

    2006-01-01

    A review discusses the chemo-responsive gels and physico-responsive gels. Phys. low mol. mass responsive gelators are interesting mols. with many potential applications in areas such as catalysis, sensor and sepn. technol., drug delivery, and biomedicine. In a relatively short period, a wide variety

  4. Catalytic control over supramolecular gel formation.

    Science.gov (United States)

    Boekhoven, Job; Poolman, Jos M; Maity, Chandan; Li, Feng; van der Mee, Lars; Minkenberg, Christophe B; Mendes, Eduardo; van Esch, Jan H; Eelkema, Rienk

    2013-05-01

    Low-molecular-weight gels show great potential for application in fields ranging from the petrochemical industry to healthcare and tissue engineering. These supramolecular gels are often metastable materials, which implies that their properties are, at least partially, kinetically controlled. Here we show how the mechanical properties and structure of these materials can be controlled directly by catalytic action. We show how in situ catalysis of the formation of gelator molecules can be used to accelerate the formation of supramolecular hydrogels, which drastically enhances their resulting mechanical properties. Using acid or nucleophilic aniline catalysis, it is possible to make supramolecular hydrogels with tunable gel-strength in a matter of minutes, under ambient conditions, starting from simple soluble building blocks. By changing the rate of formation of the gelator molecules using a catalyst, the overall rate of gelation and the resulting gel morphology are affected, which provides access to metastable gel states with improved mechanical strength and appearance despite an identical gelator composition.

  5. On shear rheology of gel propellants

    Energy Technology Data Exchange (ETDEWEB)

    Rahimi, Shai; Peretz, Arie [RAFAEL, MANOR Propulsion and Explosive Systems Division, Haifa (Israel); Natan, Benveniste [Faculty of Aerospace Engineering, Technion - Israel Institute of Technology, Haifa (Israel)

    2007-04-15

    Selected fuel, oxidizer and simulant gels were prepared and rheologically characterized using a rotational rheometer. For fuel gelation both organic and inorganic gellants were utilized, whereas oxidizers and simulants were gelled with addition of silica and polysaccharides, respectively. The generalized Herschel-Bulkley constitutive model was found to most adequately represent the gels studied. Hydrazine-based fuels, gelled with polysaccharides, were characterized as shear-thinning pseudoplastic fluids with low shear yield stress, whereas inhibited red-fuming nitric acid (IRFNA) and hydrogen peroxide oxidizers, gelled with silica, were characterized as yield thixotropic fluids with significant shear yield stress. Creep tests were conducted on two rheological types of gels with different gellant content and the results were fitted by Burgers-Kelvin viscoelastic constitutive model. The effect of temperature on the rheological properties of gel propellant simulants was also investigated. A general rheological classification of gel propellants and simulants is proposed. (Abstract Copyright [2007], Wiley Periodicals, Inc.)

  6. Controlling the Morphology of Carbon Gels

    Directory of Open Access Journals (Sweden)

    S. R. Mukai

    2012-12-01

    Full Text Available Carbon gels are unique porous carbons, which aretypically obtained through the carbonization ofresorcinol-formaldehyde gels. This material ispractically an aggregate of nanometer-sized carbonparticles. Nanopores, mostly in the size range ofmesopores, exist between the particles. Smallerpores, micropores being the majority, also exist withinthe particles. Therefore, this material has ahierarchical pore system in which short microporesare directly connected to mesopores.The precursor of carbon gels can be obtained throughsol-gel transition. Therefore there is a high possibilitythat the morphology of the resulting carbon can beeasily controlled using various molding methods.We have actually challenged the controlling of themorphology of carbon gels, and have succeeded inobtaining them in the form of disks, microspheresand microhoneycombs. Details of such carbon gelswill be reported.

  7. Internal structure analysis of particle-double network gels used in a gel organ replica

    Science.gov (United States)

    Abe, Mei; Arai, Masanori; Saito, Azusa; Sakai, Kazuyuki; Kawakami, Masaru; Furukawa, Hidemitsu

    2016-04-01

    In recent years, the fabrication of patient organ replicas using 3D printers has been attracting a great deal of attention in medical fields. However, the cost of these organ replicas is very high as it is necessary to employ very expensive 3D printers and printing materials. Here we present a new gel organ replica, of human kidney, fabricated with a conventional molding technique, using a particle-double network hydrogel (P-DN gel). The replica is transparent and has the feel of a real kidney. It is expected that gel organ replicas produced this way will be a useful tool for the education of trainee surgeons and clinical ultrasonography technologists. In addition to developing a gel organ replica, the internal structure of the P-DN gel used is also discussed. Because the P-DN gel has a complex structure comprised of two different types of network, it has not been possible to investigate them internally in detail. Gels have an inhomogeneous network structure. If it is able to get a more uniform structure, it is considered that this would lead to higher strength in the gel. In the present study we investigate the structure of P-DN gel, using the gel organ replica. We investigated the internal structure of P-DN gel using Scanning Microscopic Light Scattering (SMILS), a non-contacting and non-destructive.

  8. Electrophoresis of DNA in agarose gels, polyacrylamide gels and in free solution

    Science.gov (United States)

    Stellwagen, Nancy C.

    2009-01-01

    This review describes the electrophoresis of curved and normal DNA molecules in agarose gels, polyacrylamide gels and in free solution. These studies were undertaken to clarify why curved DNA molecules migrate anomalously slowly in polyacrylamide gels but not in agarose gels. Two milestone papers are cited, in which Ferguson plots were used to estimate the effective pore size of agarose and polyacrylamide gels. Subsequent studies on the effect of the electric field on agarose and polyacrylamide gel matrices, DNA interactions with the two gel matrices, and the effect of curvature on the free solution mobility of DNA are also described. The combined results suggest that the anomalously slow mobilities observed for curved DNA molecules in polyacrylamide gels are due primarily to preferential interactions of curved DNAs with the polyacrylamide gel matrix; the restrictive pore size of the matrix is of lesser importance. In free solution, DNA mobilities increase with increasing molecular mass until leveling off at a plateau value of (3.17 ± 0.01) × 10-4 cm2/Vs in 40 mM Tris-acetate-EDTA buffer at 20°C. Curved DNA molecules migrate anomalously slowly in free solution as well as in polyacrylamide gels, explaining why the Ferguson plots of curved and normal DNAs containing the same number of base pairs extrapolate to different mobilities at zero gel concentration. PMID:19517510

  9. Gelatin increases the coarseness of whey protein gels and impairs water exudation from the mixed gel at low temperatures

    NARCIS (Netherlands)

    Martin, A.H.; Bakhuizen, E.; Ersch, C.; Urbonaite, V.; Jongh, H.H.J. de; Pouvreau, L.

    2016-01-01

    To understand the origin of water holding of mixed protein gels, a study was performed on water exudation from mixed whey protein (WP)-gelatin gels upon applied pressure. Mixed gels were prepared with varying WP and gelatin concentration and gelatin type to obtain gels with a wide range of gel

  10. Sol-gel composite material characteristics caused by different dielectric constant sol-gel phases

    Science.gov (United States)

    Kimoto, Keisuke; Matsumoto, Makoto; Kaneko, Tsukasa; Kobayashi, Makiko

    2016-07-01

    Ultrasonic transducers prepared by a sol-gel composite method have been investigated in the field of nondestructive testing (NDT). Sol-gel composite materials could be ideal piezoelectric materials for ultrasonic transducer applications in the NDT field, and a new sol-gel composite with desirable characteristics has been developed. Three kinds of sol-gel composite materials composed of different dielectric constant sol-gel phases, Pb(Zr,Ti)O3 (PZT), Bi4Ti3O12 (BiT), and BaTiO3 (BT), and the same piezoelectric powder phase, PbTiO3 (PT), were fabricated and their properties were compared quantitatively. As a result, the PT/BT, sol-gel composite with the highest dielectric constant sol-gel phase showed the highest d 33 and signal strength. In addition, only PT/BT was successfully poled by room-temperature corona poling with reasonable signal strength.

  11. Electrokinetics of nanoparticle gel-electrophoresis.

    Science.gov (United States)

    Hill, Reghan J

    2016-09-28

    Gel-electrophoresis has been demonstrated in recent decades to successfully sort a great variety of nanoparticles according to their size, charge, surface chemistry, and corona architecture. However, quantitative theoretical interpetations have been limited by the number and complexity of factors that influence particle migration. Theoretical models have been fragmented and incomplete with respect to their counterparts for free-solution electrophoresis. This paper unifies electrokinetic models that address complex nanoparticle corona architectures, corona and gel charge regulation (e.g., by the local pH), multi-component electrolytes, and non-linear electrostatics and relaxation effects. By comprehensively addressing the electrokinetic aspects of the more general gel-electrophoresis problem, in which short-ranged steric interactions are significant, a stage is set to better focus on the physicochemical and steric factors. In this manner, it is envisioned that noparticle gel-electrophoresis may eventually be advanced from a nanoparticle-characterization tool to one that explicitly probes the short-ranged interactions of nanoparticles with soft networks, such as synthetic gels and biological tissues. In this paper, calculations are undertaken that identify a generalized Hückel limit for nanoparticles in low-conductivity gels, and a new Smoluchowski limit for polyelectrolyte-coated particles in high-conductivity gels that is independent of the gel permeability. Also of fundamental interest is a finite, albeit small, electrophoretic mobility for uncharged particles in charged gels. Electrophoretic mobilities and drag coefficients (with electroviscous effects) for nanoparticles bearing non-uniform coronas show that relaxation effects are typically weak for the small nanoparticles (radius ≈3-10 nm) to which gel-electrophoresis has customarily been applied, but are profound for the larger nanoparticles (radius ≳ 40 nm in low conductivity gels) to which passivated gel

  12. Sol-Gel Manufactured Energetic Materials

    Science.gov (United States)

    Simpson, Randall L.; Lee, Ronald S.; Tillotson, Thomas M.; Hrubesh, Lawrence W.; Swansiger, Rosalind W.; Fox, Glenn A.

    2005-05-17

    Sol-gel chemistry is used for the preparation of energetic materials (explosives, propellants and pyrotechnics) with improved homogeneity, and/or which can be cast to near-net shape, and/or made into precision molding powders. The sol-gel method is a synthetic chemical process where reactive monomers are mixed into a solution, polymerization occurs leading to a highly cross-linked three dimensional solid network resulting in a gel. The energetic materials can be incorporated during the formation of the solution or during the gel stage of the process. The composition, pore, and primary particle sizes, gel time, surface areas, and density may be tailored and controlled by the solution chemistry. The gel is then dried using supercritical extraction to produce a highly porous low density aerogel or by controlled slow evaporation to produce a xerogel. Applying stress during the extraction phase can result in high density materials. Thus, the sol-gel method can be used for precision detonator explosive manufacturing as well as producing precision explosives, propellants, and pyrotechnics, along with high power composite energetic materials.

  13. Crystallization of lactose from carbopol gels.

    Science.gov (United States)

    Zeng, X M; Martin, G P; Marriott, C; Pritchard, J

    2000-07-01

    To crystallize lactose under static conditions with a view to preparing crystals of well-defined morphology. et-Lactose monohydrate was crystallized from neutralized Carbopol 934 gels. When the majority of crystals had grown to maturity, the gels were acidified using diluted hydrochloric acid and the crystals were harvested by filtration or centrifugation and washed with ethanol-water mixtures. Crystals prepared from the gel had a consistently narrower size distribution than control crystals, prepared from solution under constant stirring. If crystallization was effected in the gel without sedimentation of the crystals, then the resultant crystals had smooth surfaces without visually detectable surface roughness or asperities viewed by optical microscopy. The crystals from Carbopol gels also exhibited the uniform shape of an elongated tomahawk regardless of the crystallization conditions, in contrast to crystallization under constant stirring, where the crystal shape of lactose changed with crystallization conditions especially as a function of the initial concentration of lactose. All batches of lactose crystals prepared from Carbopol gels existed as alpha-lactose monohydrate, which showed better flowability than the controls of a similar particle size. Crystallization from Carbopol gel produces lactose crystals of uniform size, regular shape, smooth surface, and improved flowability.

  14. Some Thoughts on The Definition of a Gel

    Science.gov (United States)

    Nishinari, Katsuyoshi

    To avoid the confusion of the concept of a gel frequently encountered in daily markets of food, cosmetics, and other industrial products, the definition of a gel is revisited. Recent proposals of the definition of a gel are overviewed, and classifications of various gels from different points of view are described. Discussion is mainly focused on the gel-sol transition and the difference between the structured liquid and the gel, and the classification of gels by temperature dependence of elastic modulus. Finally, the definition of a gel is proposed as a working hypothesis from rheological and structural view points.

  15. Pulsed field gel electrophoresis a practical guide

    CERN Document Server

    Birren, Bruce

    1993-01-01

    Pulsed Field Gel Electrophoresis: A Practical Guide is the first laboratory manual to describe the theory and practice of this technique. Based on the authors' experience developing pulsed field gel instruments and teaching procedures, this book provides everything a researcher or student needs to know in order to understand and carry out pulsed field gel experiments. Clear, well-tested protocols assume only that users have a basic familiarity with molecular biology. Thorough coverage of useful data, theory, and applications ensures that this book is also a lasting resource for more adv

  16. Applications of sol gel ceramic coatings

    Energy Technology Data Exchange (ETDEWEB)

    Barrow, D. [Datec Coating Corp., Kingston, Ont. (Canada)

    1996-12-31

    The sol gel method is a chemical technique in which polycrystalline ceramic films are fabricated from a solution of organometallic precursors. The technique is attractive for many industrial applications because it is a simple (films are processed in air), flexible (can be used to coat complex geometries) and cost effective (does not require expensive equipment) process. In addition, dense, high quality coatings can be achieved at much lower temperatures than is generally required for sintering bulk ceramics. In this paper the conventional sol gel method and the new datec process are reviewed and potential applications of sol gel coatings in automotive, aerospace, petrochemical, nuclear and electronic industries are discussed. (orig.)

  17. Muscular Contraction Mimiced by Magnetic Gels

    Science.gov (United States)

    Zrínyi, Miklós; Szabó, Dénes

    The ability of magnetic-field-sensitive gels to undergo a quick controllable change of shape can be used to create an artificially designed system possessing sensor- and actuator functions internally in the gel itself. The peculiar magneto-elastic properties may be used to create a wide range of motion and to control the shape change and movement, that are smooth and gentle similar to that observed in muscle. Magnetic field sensitive gels provide attractive means of actuation as artificial muscle for biomechanics and biomimetic applications.

  18. Buckling Instability in Liquid Crystalline Physical Gels

    Science.gov (United States)

    Verduzco, Rafael; Meng, Guangnan; Kornfield, Julia A.; Meyer, Robert B.

    2006-04-01

    In a nematic gel we observe a low-energy buckling deformation arising from soft and semisoft elastic modes. We prepare the self-assembled gel by dissolving a coil side-group liquid-crystalline polymer coil copolymer in a nematic liquid crystal. The gel has long network strands and a precisely tailored structure, making it ideal for studying nematic rubber elasticity. Under polarized optical microscopy we observe a striped texture that forms when gels uniformly aligned at 35 °C are cooled to room temperature. We model the instability using the molecular theory of nematic rubber elasticity, and the theory correctly captures the change in pitch length with sample thickness and polymer concentration. This buckling instability is a clear example of a low-energy deformation that arises in materials where polymer network strains are coupled to the director orientation.

  19. K-Basin gel formation studies

    Energy Technology Data Exchange (ETDEWEB)

    Beck, M.A.

    1998-07-23

    A key part of the proposed waste treatment for K Basin sludge is the elimination of reactive uranium metal by dissolution in nitric acid (Fkirnent, 1998). It has been found (Delegard, 1998a) that upon nitric acid dissolution of the sludge, a gel sometimes forms. Gels are known to sometimes impair solid/liquid separation and/or material transfer. The purpose of the work reported here is to determine the cause(s) of the gel formation and to determine operating parameters for the sludge dissolution that avoid formation of gel. This work and related work were planned in (Fkunent, 1998), (Jewett, 1998) and (Beck, 1998a). This report describes the results of the tests in (Beck, 1998a) with non-radioactive surrogates.

  20. Maize Arabinoxylan Gels as Protein Delivery Matrices

    Directory of Open Access Journals (Sweden)

    Ana Luisa Martínez-López

    2009-04-01

    Full Text Available The laccase induced gelation of maize bran arabinoxylans at 2.5% (w/v in the presence of insulin or β-lactoglobulin at 0.1% (w/v was investigated. Insulin and β-lacto-globulin did not modify either the gel elasticity (9 Pa or the cross-links content (0.03 and 0.015 mg di- and triferulic acids/mg arabinoxylan, respectively. The protein release capability of the gel was also investigated. The rate of protein release from gels was dependent on the protein molecular weight. The apparent diffusion coefficient was 0.99 × 10-7 and 0.79 × 10-7 cm2/s for insulin (5 kDa and β-lactoglobulin (18 kDa, respectively. The results suggest that maize bran arabinoxylan gels can be potential candidates for the controlled release of proteins.

  1. Evaluation of wheat by polyacrylamide gel electrophoresis

    African Journals Online (AJOL)

    PRECIOUS

    2010-01-11

    Jan 11, 2010 ... SDS-PAGE gels cluster analysis was performed to check the ... It is concluded that SDS-PAGE analysis of wheat endosperm protein is useful for evaluation of ..... Comparison of phenotypic and molecular marker-based.

  2. Porosity Governs Normal Stresses in Polymer Gels.

    Science.gov (United States)

    de Cagny, Henri C G; Vos, Bart E; Vahabi, Mahsa; Kurniawan, Nicholas A; Doi, Masao; Koenderink, Gijsje H; MacKintosh, F C; Bonn, Daniel

    2016-11-18

    When sheared, most elastic solids including metals, rubbers, and polymer gels dilate perpendicularly to the shear plane. This behavior, known as the Poynting effect, is characterized by a positive normal stress. Surprisingly, fibrous biopolymer gels exhibit a negative normal stress under shear. Here we show that this anomalous behavior originates from the open-network structure of biopolymer gels. Using fibrin networks with a controllable pore size as a model system, we show that the normal-stress response to an applied shear is positive at short times, but decreases to negative values with a characteristic time scale set by pore size. Using a two-fluid model, we develop a quantitative theory that unifies the opposite behaviors encountered in synthetic and biopolymer gels.

  3. Sol-gel deposited electrochromic coatings

    Energy Technology Data Exchange (ETDEWEB)

    Ozer, N.; Lampert, C.M.

    1995-06-01

    Electrochromic devices have increasing application in display devices, switchable mirrors and smart windows. A variety of vacuum deposition technologies have been used to make electrochromic devices. The sol- gel process offers an alternative approach to the synthesis of optical quality and low cost electrochromic device layers. This study summarizes the developments in sol-gel deposited electrochromic films. The sol-gel process involves the formation of oxide networks upon hydrolysis-condensation of alkoxide precursors. In this study we cover the sol-gel deposited oxides of WO[sub 3], V[sub 2]O[sub 5], TiO[sub 2], Nb[sub 2]O[sub 5], and NiO[sub x].

  4. Sol-gel antireflective coating on plastics

    Science.gov (United States)

    Ashley, Carol S.; Reed, Scott T.

    1990-01-01

    An antireflection film made from a reliquified sol-gel hydrolyzation, condensation polymeric reaction product of a silicon, alkoxides and/or metal alkoxides, or mixtures thereof. The film is particularly useful for coating plastics.

  5. Formation of Anisotropic Block Copolymer Gels

    Science.gov (United States)

    Liaw, Chya Yan; Shull, Kenneth; Henderson, Kevin; Joester, Derk

    2011-03-01

    Anisotropic, fibrillar gels are important in a variety of processes. Biomineralization is one example, where the mineralization process often occurs within a matrix of collagen or chitin fibers that trap the mineral precursors and direct the mineralization process. We wish to replicate this type of behavior within block copolymer gels. Particularly, we are interested in employing gels composed of cylindrical micelles, which are anisotropic and closely mimic biological fibers. Micelle geometry is controlled in our system by manipulating the ratio of molecular weights of the two blocks and by controlling the detailed thermal processing history of the copolymer solutions. Small-Angle X-ray Scattering and Dynamic Light Scattering are used to determine the temperature dependence of the gel formation process. Initial experiments are based on a thermally-reversible alcohol-soluble system, that can be subsequently converted to a water soluble system by hydrolysis of a poly(t-butyl methacrylate) block to a poly (methacrylic acid) block. MRSEC.

  6. Elastocapillary Deformations and Fracture of Soft Gels

    Science.gov (United States)

    Daniels, Karen; Grzelka, Marion; Bostwick, Joshua

    When a droplet is placed on the surface of a soft gel, the surface deforms by an amount proportional to the elastocapillary length calculated from the ratio of surface tension and elastic modulus. For sufficiently large deformations, the gel can fracture due to the forces generated under the liquid-gel contact line. We observe that a starburst of channel fractures forms at the surface of the gel, driven by fluid propagating away from the central droplet. To understand the initiation of these cracks, we model the substrate as an incompressible, linear-elastic solid and quantify the elastic response. This provides quantitative agreement with experimental measurements of the number of fracture arms as a function of material properties and geometric parameters. In addition, we find that the initiation process is thermally-activated, with delay time that decreases as a function of the elastocapillary length.

  7. Sample collection system for gel electrophoresis

    Science.gov (United States)

    Olivares, Jose A.; Stark, Peter C.; Dunbar, John M.; Hill, Karen K.; Kuske, Cheryl R.; Roybal, Gustavo

    2004-09-21

    An automatic sample collection system for use with an electrophoretic slab gel system is presented. The collection system can be used with a slab gel have one or more lanes. A detector is used to detect particle bands on the slab gel within a detection zone. Such detectors may use a laser to excite fluorescently labeled particles. The fluorescent light emitted from the excited particles is transmitted to low-level light detection electronics. Upon the detection of a particle of interest within the detection zone, a syringe pump is activated, sending a stream of buffer solution across the lane of the slab gel. The buffer solution collects the sample of interest and carries it through a collection port into a sample collection vial.

  8. Physical properties of polymeric gels; Kobunshi gel no kiso denki tokusei

    Energy Technology Data Exchange (ETDEWEB)

    Tajitsu, Y. [Yamagata University, Yamagata (Japan). Faculty of Engineering; Chiba, A. [Waseda University, Tokyo (Japan). School of Science and Engineering

    1998-03-31

    This paper explains the following matters on properties of polymeric gels: the percolation theory on sol-gel transfer (incorporating fractal geometry) has become endorsed experimentally; in addition, the large relaxation phenomenon seen in dielectric spectra of carrageenan gel at temperatures lower than the gelation point suggests that a domain of very long needle shape has grown; analysis of dielectric relaxation spectra of sodium acrylate gel (a kind of polymeric electrolyte gel) reveals a result which suggests that its dielectric relaxation mechanism is the same as that of a polymeric electrolyte interlocking system; a polymeric gel membrane (which retains aqueous electrolyte solution) made by dissolving LiBF4 into a mixed solution of propylene carbonate and dimethoxyethane is known to show ion electric conductivity value close to that of aqueous electrolyte solution (in the order of 10 {sup -3} S/cm). 27 refs., 6 figs.

  9. Rheological Characterization of Ethanolamine Gel Propellants

    Science.gov (United States)

    V. S Jyoti, Botchu; Baek, Seung Wook

    2016-07-01

    Ethanolamine is considered to be an environmentally friendly propellant system because it has low toxicity and is noncarcinogenic in nature. In this article, efforts are made to formulate and prepare ethanolamine gel systems, using pure agarose and hybrids of paired gelling agents (agarose + polyvinylpyrrolidine (PVP), agarose + SiO2, and PVP + SiO2), that exhibit a measurable yield stress, thixotropic behavior under shear rate ranges of 1-1,000 s-1 and a viscoelastic nature. To achieve these goals, multiple rheological experiments (including flow and dynamic studies) are performed. In this article, results are presented from experiments measuring the apparent viscosity, yield stress, thixotropy, dynamic strain, frequency sweep, and tan δ behaviors, as well as the effects of the test temperature, in the gel systems. The results show that the formulated ethanolamine gels are thixotropic in nature with yield stress between 30 and 60 Pa. The apparent viscosity of the gel decreases as the test temperature increases, and the apparent activation energy is the lowest for the ethanolamine-(PVP + SiO2) gel system. The dynamic rheology study shows that the type of gellant, choice of hybrid gelling materials and their concentration, applied frequencies, and strain all vitally affect the viscoelastic properties of the ethanolamine gel systems. In the frequency sweep experiment, the ethanolamine gels to which agarose, agarose + PVP, and agarose + SiO2 were added behave like linear frequency-dependent viscoelastic liquids, whereas the ethanolamine gel to which PVP + SiO2 was added behaves like a nearly frequency-independent viscoelastic solid. The variation in the tan δ of these gelled propellants as a function of frequency is also discussed.

  10. Using Greener Gels To Explore Rheology

    OpenAIRE

    Matharu, Avtar Singh; Hurst, Glenn; Garrett, Brendan

    2017-01-01

    A laboratory experiment was developed to investigate the rheological properties of a green calcium-cross-linked alginate gel as an alternative to the traditional borax-cross-linked poly(vinyl alcohol) gel. As borax is suspected of damaging fertility and the unborn child, a safe, green alternative is necessary. The rheological properties of a sodium alginate solution were examined as a function of temperature using capillary viscometry. Gelation and degelation processes were followed using rot...

  11. Gel and gel-free approaches for the quantitative characterisation of complex protein mixtures

    CSIR Research Space (South Africa)

    Buthelezi, S

    2012-10-01

    Full Text Available -dimensional gel electrophoresis (2DE gels), solution phase isoelectric focusing (IEF), offline strong cation exchange (SCX) chromatography and offline high pH reverse phase (RP) chromatography. All fractions collected from the solution-based methods were... which fractionation method between 2DE gels, solution phase IEF, SCX-RP and RP-RP results in the highest number of protein identities RESULTS When the number of protein identities in the different fractionation techniques was compared (Figure 2...

  12. Tridimensional dosimetry using MAGIC gel with formaldehyde; Dosimetria tridimensional usando gel MAGIC com formaldeido

    Energy Technology Data Exchange (ETDEWEB)

    Pavoni, Juliana F.; Baffa, Oswaldo [Universidade de Sao Paulo (USP), Ribeirao Preto, SP (Brazil). Faculdade de Filosofia, Ciencias e Letras. Dept. de Fisica e Matematica], e-mail: baffa@ffclrp.usp.br; Pike, Tina L.; Snow, Jessica; DeWerd, Larry A. [University of Wisconsin, Madison, WI (United States). Dept. of Physics. Medical Radiation Research Center

    2010-03-15

    This paper presents the application of MAGIC gel with formaldehyde (MAGIC-f) in the tri dimensional dose distribution measurement of an IMRT planning. A high similarity was found between the dose distributions measured by the gel dosimeter and the dose distributions expected by the treatment planning system (TPS) in all of the irradiated volume, this was proved by the direct overlapping of these isodoses. These results show that MAGIC-f gel is feasible for tridimensional dose distribution measurements. (author)

  13. Pengaruh Natrium Hialuronat terhadap Penetrasi Kofein Sebagai Antiselulit dalam Sediaan Hidrogel, Hidroalkoholik Gel, dan Emulsi Gel

    Directory of Open Access Journals (Sweden)

    Joshita Djajadisastra

    2014-04-01

    Full Text Available Anticellulite topical gel preparation with caffeine as an active ingredient needs a penetration enhancer to reach subcutaneous layer. Sodium hyaluronate (NaHA, the sodium salt of hyaluronic acid, is a hydrophilic polysaccharide derivative polymer. It has an ability to enhance percutaneous penetration by loosening the dense of the compact substance of stratum corneum. The aim of this research was to observe the effects of NaHA on caffeine penetration as an anticellulite active agent in three types of gel preparation: hydrogel, hydroalcoholic gel, and gel emulsion. Each gel type contained caffeine 1,5% and was varied into three formulas. Formula 1 contained HPMC 2% as gel basis; formula 2 contained HPMC 2% and NaHA 0,5% as gel basis; formula 3 contained NaHA 2% as gel basis. Caffeine penetration properties were analyzed by Franz diffusion cell in vitro test using rat skin as membrane. Percent caffeine penetration of hydrogel formula 1, 2, 3 were 9,41 ± 0,01%; 11,74 ± 0,13%; 16,32 ± 0,03%, respectively. Percent caffeine penetration of hydroalcoholic gel formula 1, 2, 3 were 19,54 ± 0,02%; 22,99 ± 0,23%; 7,42 ± 0,08%, respectively. Percent caffeine penetration of gel emulsion formula 1, 2, 3 were 10,47 ± 0,19%; 13,41 ± 0,12%; 18,42 ± 0,06%, respectively. The result showed that NaHA enhanced the caffeine percutaneous penetration properties in various gel preparations, except hidroalkoholic gel formula 3.

  14. Actuation and ion transportation of polyelectrolyte gels

    Science.gov (United States)

    Hong, Wei; Wang, Xiao

    2010-04-01

    Consisting of charged network swollen with ionic solution, polyelectrolyte gels are known for their salient characters including ion exchange and stimuli responsiveness. The active properties of polyelectrolyte gels are mostly due to the migration of solvent molecules and solute ions, and their interactions with the fixed charges on the network. In this paper, we extend the recently developed nonlinear field theory of polyelectrolyte gels by assuming that the kinetic process is limited by the rate of the transportation of mobile species. To study the coupled mechanical deformation, ion migration, and electric field, we further specialize the model to the case of a laterally constrained gel sheet. By solving the field equations in two limiting cases: the equilibrium state and the steady state, we calculate the mechanical responses of the gel to the applied electric field, and study the dependency on various parameters. The results recover the behavior observed in experiments in which polyelectrolyte gels are used as actuators, such as the ionic polymer metal composite. In addition, the model reveals the mechanism of the selectivity in ion transportation. Although by assuming specific material laws, the reduced system resembles those in most existing models in the literature, the theory can be easily generalized by using more realistic free-energy functions and kinetic laws. The adaptability of the theory makes it suitable for studying many similar material systems and phenomena.

  15. Cavitation of a Physically Associating Gel

    Science.gov (United States)

    Mishra, Satish; Kundu, Santanu

    Self-assembly of block copolymers in selective solvents form ordered structures such as micelles, vesicles, and physically crosslinked gels due to difference in their interaction with solvents. These gels have wide range of applications in tissue engineering, food science and biomedical field due to their tunable properties and responsiveness with changing environmental conditions. Pressurization of a defect inside a physically associating gel can lead to elastic instability (cavitation) leading to failure of the gel. The failure behavior involves dissociation of physical networks. A thermoreversible, physically associating gel with different volume fractions of a triblock copolymer, poly (methyl methacrylate)-poly (n-butyl acrylate)-poly (methyl methacrylate) [PMMA-PnBA-PMMA] in 2-ethyl 1-hexanol, a midblock selective solvent, is considered here. Mechanical properties were investigated using shear rheology and cavitation experiments. The experimental data is fitted with a constitutive model that captures the stiffening behavior followed by softening behavior of a physical gel. Finite element analysis has been performed on cavitation rheology geometry to capture the failure behavior and to calculate energy release rate during cavitation experiments.

  16. Study of nuclear glasses alteration gel and synthesis of some model gels; Etude du gel d`alteration des verres nucleaires et synthese de gels modeles

    Energy Technology Data Exchange (ETDEWEB)

    Ricol, S.

    1995-10-05

    This work deals with the general problem of alteration of the reference nuclear glass R7T7. Attention is paid particularly to the altered layer formed at the glass surface during alteration process. In opposition to previous works, related essentially to glass dissolution kinetics based on chemical analyses of lixiviated elements, this thesis deals with alteration problems through structural studies of the reference glass and derived gel. This approach allows the determination of mechanisms for the gel formation and a better understanding of the behaviour of glasses towards lixiviation. Both approaches appeared complementary. Based on several spectroscopic techniques, this work showed the particular role of cations such as calcium, zirconium and iron. Studies of silica-based synthetic gels showed the synergic effect of formers cation and of one highly coordinated cation. The variation of the wavenumber related to Si-O-Si asymmetric stretching vibration can be correlated to O/Si ratio for ternary systems Si/Na/Zr. On the contrary, the Si losses of the materials depend on the number of non-bridging oxygen atoms. In the perspective of long-term behaviour, the alteration gel presents better characteristics than initial glass. It is therefore a highly stable material in static conditions. In the same way, synthetic gels are materials with very low solubilities (much lower than the alteration gel) and could be used as confining matrices. (authors). refs., 71 figs., 37 tabs.

  17. Treatment of osteochondral injuries with platelet gel

    Directory of Open Access Journals (Sweden)

    Marcus Vinicius Danieli

    2014-12-01

    Full Text Available OBJECTIVES: Treatments for injured articular cartilage have not advanced to the point that efficient regeneration is possible. However, there has been an increase in the use of platelet-rich plasma for the treatment of several orthopedic disorders, including chondral injuries. Our hypothesis is that the treatment of chondral injuries with platelet gel results in higher-quality repair tissue after 180 days compared with chondral injuries not treated with gel. METHODS: A controlled experimental laboratory study was performed on 30 male rabbits to evaluate osteochondral injury repair after treatment with or without platelet gel. Osteochondral injuries were surgically induced in both knees of each rabbit at the medial femoral condyle. The left knee injury was filled with the platelet gel, and the right knee was not treated. Microscopic analysis of both knee samples was performed after 180 days using a histological grading scale. RESULTS: The only histological evaluation criterion that was not significantly different between treatments was metachromasia. The group that was treated with platelet gel exhibited superior results in all other criteria (cell morphology, surface regularity, chondral thickness and repair tissue integration and in the total score. CONCLUSION: The repair tissue was histologically superior after 180 days in the study group treated with platelet gel compared with the group of untreated injuries.

  18. Actuator device utilizing a conductive polymer gel

    Science.gov (United States)

    Chinn, Douglas A.; Irvin, David J.

    2004-02-03

    A valve actuator based on a conductive polymer gel is disclosed. A nonconductive housing is provided having two separate chambers separated by a porous frit. The conductive polymer is held in one chamber and an electrolyte solution, used as a source of charged ions, is held in the second chamber. The ends of the housing a sealed with a flexible elastomer. The polymer gel is further provide with electrodes with which to apply an electrical potential across the gel in order to initiate an oxidation reaction which in turn drives anions across the porous frit and into the polymer gel, swelling the volume of the gel and simultaneously contracting the volume of the electrolyte solution. Because the two end chambers are sealed the flexible elastomer expands or contracts with the chamber volume change. By manipulating the potential across the gel the motion of the elastomer can be controlled to act as a "gate" to open or close a fluid channel and thereby control flow through that channel.

  19. Preparation of continuous alumina gel fibres by aqueous sol–gel process

    Indian Academy of Sciences (India)

    Hongbin Tan; Xiaoling Ma; Mingxing Fu

    2013-02-01

    Continuous alumina gel fibres were prepared by sol–gel method. The spinning sol was prepared by mixing aluminum nitrate, lactic acid and polyvinylpyrrolidone with a mass ratio of 10:3:1.5. Thermogravimetry–differential scanning calorimetry (TG–DSC), Fourier transform infrared (FTIR) spectra, X-ray diffraction (XRD), and scanning electron microscopy (SEM) were used to characterize the properties of the gel and ceramic fibres. The Al2O3 fibres with a uniform diameter can be obtained by sintering gel fibres at 1200 °C.

  20. The Gel Electrophoresis Markup Language (GelML) from the Proteomics Standards Initiative

    Science.gov (United States)

    Gibson, Frank; Hoogland, Christine; Martinez-Bartolomé, Salvador; Medina-Aunon, J. Alberto; Albar, Juan Pablo; Babnigg, Gyorgy; Wipat, Anil; Hermjakob, Henning; Almeida, Jonas S; Stanislaus, Romesh; Paton, Norman W; Jones, Andrew R

    2011-01-01

    The Human Proteome Organisation’s Proteomics Standards Initiative (HUPO-PSI) has developed the GelML data exchange format for representing gel electrophoresis experiments performed in proteomics investigations. The format closely follows the reporting guidelines for gel electrophoresis, which are part of the Minimum Information About a Proteomics Experiment (MIAPE) set of modules. GelML supports the capture of metadata (such as experimental protocols) and data (such as gel images) resulting from gel electrophoresis so that laboratories can be compliant with the MIAPE Gel Electrophoresis guidelines, while allowing such data sets to be exchanged or downloaded from public repositories. The format is sufficiently flexible to capture data from a broad range of experimental processes, and complements other PSI formats for mass spectrometry data and the results of protein and peptide identifications to capture entire gel-based proteome workflows. GelML has resulted from the open standardisation process of PSI consisting of both public consultation and anonymous review of the specifications. PMID:20677327

  1. Uncertainty in 3D gel dosimetry

    Science.gov (United States)

    De Deene, Yves; Jirasek, Andrew

    2015-01-01

    Three-dimensional (3D) gel dosimetry has a unique role to play in safeguarding conformal radiotherapy treatments as the technique can cover the full treatment chain and provides the radiation oncologist with the integrated dose distribution in 3D. It can also be applied to benchmark new treatment strategies such as image guided and tracking radiotherapy techniques. A major obstacle that has hindered the wider dissemination of gel dosimetry in radiotherapy centres is a lack of confidence in the reliability of the measured dose distribution. Uncertainties in 3D dosimeters are attributed to both dosimeter properties and scanning performance. In polymer gel dosimetry with MRI readout, discrepancies in dose response of large polymer gel dosimeters versus small calibration phantoms have been reported which can lead to significant inaccuracies in the dose maps. The sources of error in polymer gel dosimetry with MRI readout are well understood and it has been demonstrated that with a carefully designed scanning protocol, the overall uncertainty in absolute dose that can currently be obtained falls within 5% on an individual voxel basis, for a minimum voxel size of 5 mm3. However, several research groups have chosen to use polymer gel dosimetry in a relative manner by normalizing the dose distribution towards an internal reference dose within the gel dosimeter phantom. 3D dosimetry with optical scanning has also been mostly applied in a relative way, although in principle absolute calibration is possible. As the optical absorption in 3D dosimeters is less dependent on temperature it can be expected that the achievable accuracy is higher with optical CT. The precision in optical scanning of 3D dosimeters depends to a large extend on the performance of the detector. 3D dosimetry with X-ray CT readout is a low contrast imaging modality for polymer gel dosimetry. Sources of error in x-ray CT polymer gel dosimetry (XCT) are currently under investigation and include inherent

  2. 21 CFR 524.660b - Dimethyl sulfoxide gel.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Dimethyl sulfoxide gel. 524.660b Section 524.660b... Dimethyl sulfoxide gel. (a) Specifications. Dimethyl sulfoxide gel, veterinary contains 90 percent dimethyl sulfoxide in an aqueous gel. (b) Sponsor. See No. 000856 in § 510.600(c) of this chapter. (c) Conditions...

  3. Separation of Pneumcoccal Capsular Polysaccharide BY Gel Extraction

    Institute of Scientific and Technical Information of China (English)

    Xu Xiaoping; Huang Xinghua; Li Zhongqin; Chen Jiebo

    2004-01-01

    Separation of pneumcoccal capsular polysaccharide by gel was investigated in this paper. The gels used here were poly(acrylamide-co-sodium methacrylate)gels and prepared by free radical polymerization in aqueous solution. The experimental results indicated that gel extraction is a potential method to separate pneumcoccal capsular polysaccharide from its dilute solution.

  4. Preparation and characterization of lidocaine rice gel for oral application.

    Science.gov (United States)

    Okonogi, Siriporn; Kaewpinta, Adchareeya; Yotsawimonwat, Songwut; Khongkhunthian, Sakornrat

    2015-12-01

    The objective of the present study was to prepare buccal anesthetic gels using rice as gelling agent. Rice grains of four rice varieties, Jasmine (JM), Saohai (SH), Homnil (HN), and Doisket (DS) were chemically modified. Buccal rice gels, containing lidocaine hydrochloride as local anesthetic drug were formulated using the respective modified rice varieties. The gels were evaluated for outer appearance, pH, color, gel strength, foaming property, adhesion, in vitro drug release and in vivo efficacy. It was found that the developed rice gels possessed good texture. Rice varieties showed influence on gel strength, color, turbidity, adhesive property, release property, and anesthetic efficacy. JM gel showed the lowest turbidity with light transmission of 86.76 ± 1.18% whereas SH gel showed the highest gel strength of 208.78 ± 10.42 g/cm(2). Lidocaine hydrochloride can cause a decrease in pH and adhesive property but an increase in turbidity of the gels. In vitro drug release profile within 60 min of lidocaine SH gel and lidocaine HN gel showed that lidocaine could be better released from SH gel. Evaluation of in vivo anesthetic efficacy in 100 normal volunteers indicates that both lidocaine rice gels have high efficacy but different levels. Lidocaine SH gel possesses faster onset of duration and longer duration of action than lidocaine HN gel.

  5. Hexagonal phase based gel-emulsion (O/H1 gel-emulsion): formation and rheology.

    Science.gov (United States)

    Alam, Mohammad Mydul; Aramaki, Kenji

    2008-11-04

    The formation, stability, and rheological behavior of a hexagonal phase based gel-emulsion (O/H1 gel-emulsion) have been studied in water/C12EO8/hydrocarbon oil systems. A partial phase behavior study indicates that the oil nature has no effect on the phase sequences in the ternary phase diagram of water/C12EO8/oil systems but the domain size of the phases or the oil solubilization capacity considerably changes with oil nature. Excess oil is in equilibrium with the hexagonal phase (H1) in the ternary phase diagram in the H1+O region. The O/H1 gel-emulsion was prepared (formation) and kept at 25 degrees C to check stability. It has been found that the formation and stability of the O/H1 gel-emulsion depends on the oil nature. After 2 min observation (formation), the results show that short chain linear hydrocarbon oils (heptane, octane) are more apt to form a O/H1 gel-emulsion compared to long chain linear hydrocarbon oils (tetradecane, hexadecane), though the stability is not good enough in either system, that is, oil separates within 24 h. Nevertheless, the formation and stability of the O/H1 gel-emulsion is appreciably increased in squalane and liquid paraffin. It is surmised that the high transition temperature of the H1+O phase and the presence of a bicontinuous cubic phase (V1) might hamper the formation of a gel-emulsion. It has been pointed out that the solubilization of oil in the H1 phase could be related to emulsion stability. On the other hand, the oil nature has little or no effect on the formation and stability of a cubic phase based gel-emulsion (O/I1 gel-emulsion). From rheological measurements, it has found that the rheogram of the O/H1 gel-emulsion indicates gel-type structure and shows shear thinning behavior similar to the case of the O/I1 gel-emulsion. Rheological data infer that the O/I1 gel-emulsion is more viscous than the O/H1 gel-emulsion at room temperature but the O/H1 gel-emulsion shows consistency at elevated temperature.

  6. Fabricating porous materials using interpenetrating inorganic-organic composite gels

    Science.gov (United States)

    Seo, Dong-Kyun; Volosin, Alex

    2016-06-14

    Porous materials are fabricated using interpenetrating inorganic-organic composite gels. A mixture or precursor solution including an inorganic gel precursor, an organic polymer gel precursor, and a solvent is treated to form an inorganic wet gel including the organic polymer gel precursor and the solvent. The inorganic wet gel is then treated to form a composite wet gel including an organic polymer network in the body of the inorganic wet gel, producing an interpenetrating inorganic-organic composite gel. The composite wet gel is dried to form a composite material including the organic polymer network and an inorganic network component. The composite material can be treated further to form a porous composite material, a porous polymer or polymer composite, a porous metal oxide, and other porous materials.

  7. Interaction between hepatocytes and collagen gel in hollow fibers

    OpenAIRE

    Dai, Jing; ZHANG Guo-liang; Meng, Qin

    2009-01-01

    Gel entrapment culture of primary mammalian cells within collagen gel is one important configuration for construction of bioartificial organ as well as in vitro model for predicting drug situation in vivo. Gel contraction in entrapment culture, resulting from cell-mediated reorganization of the extracellular matrix, was commonly used to estimate cell viability. However, the exact influence of gel contraction on cell activities has rarely been addressed. This paper investigated the gel contrac...

  8. Supramolecular Gel-Templated In Situ Synthesis and Assembly of CdS Quantum Dots Gels

    Science.gov (United States)

    Zhu, Lili; He, Jie; Wang, Xiaoliang; Li, Dawei; He, Haibing; Ren, Lianbing; Jiang, Biwang; Wang, Yong; Teng, Chao; Xue, Gi; Tao, Huchun

    2017-01-01

    Although many studies have attempted to develop strategies for spontaneously organizing nanoparticles (NPs) into three-dimensional (3D) geometries, it remains a fascinating challenge. In this study, a method for in situ synthesis and self-assembly of a CdS quantum dots (QDs) gel using a Cd supramolecular gel as a scaffold was demonstrated. During the QDs formation process, the Cd ions that constituted the Cd gels served as the precursors of the CdS QDs, and the oleic acid (OA) that ligated with the Cd in the supramolecular gels was capped on the surface of the CdS QDs in the form of carboxylate. The OA-stabilized CdS QDs were in situ synthesized in the entangled self-assembled fibrillar networks (SAFIN) of the Cd gels through reactions between the gelator and H2S. As a result, the QDs exactly replicated the framework of the SAFIN in the CdS QD gels instead of simply assembling along the SAFIN of the supramolecular gels. Moreover, the CdS QDs showed extraordinary sensitivity in the fluorescence detection of IO4 - anions. The facile one-step method developed here is a new approach to assembling nanostructured materials into 3D architectures and has general implications for the design of low molecular mass gelators to bring desired functionality to the developed supramolecular gels.

  9. Optimal processing for gel electrophoresis images: Applying Monte Carlo Tree Search in GelApp.

    Science.gov (United States)

    Nguyen, Phi-Vu; Ghezal, Ali; Hsueh, Ya-Chih; Boudier, Thomas; Gan, Samuel Ken-En; Lee, Hwee Kuan

    2016-08-01

    In biomedical research, gel band size estimation in electrophoresis analysis is a routine process. To facilitate and automate this process, numerous software have been released, notably the GelApp mobile app. However, the band detection accuracy is limited due to a band detection algorithm that cannot adapt to the variations in input images. To address this, we used the Monte Carlo Tree Search with Upper Confidence Bound (MCTS-UCB) method to efficiently search for optimal image processing pipelines for the band detection task, thereby improving the segmentation algorithm. Incorporating this into GelApp, we report a significant enhancement of gel band detection accuracy by 55.9 ± 2.0% for protein polyacrylamide gels, and 35.9 ± 2.5% for DNA SYBR green agarose gels. This implementation is a proof-of-concept in demonstrating MCTS-UCB as a strategy to optimize general image segmentation. The improved version of GelApp-GelApp 2.0-is freely available on both Google Play Store (for Android platform), and Apple App Store (for iOS platform). © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. Alkali cold gelation of whey proteins. Part I: sol-gel-sol(-gel) transitions.

    Science.gov (United States)

    Mercadé-Prieto, Ruben; Gunasekaran, Sundaram

    2009-05-19

    The cold gelation of preheated whey protein isolate (WPI) solutions at alkaline conditions (pH>10) has been studied to better understand the effect of NaOH in the formation and destruction of whey protein aggregates and gels. Oscillatory rheology has been used to follow the gelation process, resulting in novel and different gelation profiles with the gelation pH. At low alkaline pH, typical sol-gel transitions are observed, as in many other biopolymers. At pH>11.5, the system gels quickly, after approximately 300 s, followed by a slow degelation step that transforms the gel to a viscous solution. Finally, there is a second gelation step. This results in a surprising sol-gel-sol-gel transition in time at constant gelation conditions. At very high pH (>12.5), the degelation step is very severe, and the second gelation step is not observed, resulting in a sol-gel-sol transition. The first quick gelation step is related to the quick swelling of the WPI aggregates in alkali, as observed from light scattering, which enables the formation of new noncovalent interactions to form a gel network. These interactions are argued to be destroyed in the subsequent degelation step. Disulfide cross-linking is observed only in the second gelation step, not in the first step.

  11. Evolution of gel structure during thermal processing of Na-geopolymer gels.

    Science.gov (United States)

    Duxson, Peter; Lukey, Grant C; van Deventer, Jannie S J

    2006-10-10

    The present work examines how the gel structure and phase composition of Na-geopolymers derived from metakaolin with varied Si/Al ratio evolve with exposure to temperatures up to 1000 degrees C. Gels were thermally treated and characterized using quantitative XRD, DTA, and FTIR to elucidate the changes in gel structure, phase composition, and porosity at each stage of heating. It is found that the phase stability, defined by the amount and onset temperature of crystallization, is improved at higher Si/Al ratios. Two different mechanisms of densification have been isolated by FTIR, related to viscous flow and collapse of the highly distributed pore network in the gel. Gels with low Si/Al ratio only experience viscous flow that correlates with low thermal shrinkage. Gels at a higher Si/Al ratio, which have a homogeneous microstructure composed of a highly distributed porosity, undergo both densification processes corresponding to a large extent of thermal shrinkage during densification. This work elucidates the intimate relationship between gel microstructure, chemistry, and thermal evolution of Na-geopolymer gels.

  12. Calcium Impact on Milk Gels Formation

    DEFF Research Database (Denmark)

    Koutina, Glykeria

    to be formed. In addition the low amount of micellar calcium caused a more compact gel structure with many protein aggregates. The results of this study highlighted the importance of calcium for the formation of acid, calcium and rennet gels. The content and the interactions of calcium with proteins during...... salts. The perturbation of calcium equilibria by these factors will affect the final properties of acid, calcium and rennet milk gels. By decreasing the pH from 6.0 to 5.2 (acid gels), the calcium equilibrium was significantly affected by temperature (4, 20, 30, 40 oC), and different combinations...... of temperature and pH may result in different final structure properties in dairy products such as cheese. A significant amount of calcium remained in the micelles between pH 4.8 and 4.6, this can contribute to the final strength of acid milk gels, such as in yogurt or in cream cheeses. After the gelation point...

  13. DNA DAMAGE QUANTITATION BY ALKALINE GEL ELECTROPHORESIS.

    Energy Technology Data Exchange (ETDEWEB)

    SUTHERLAND,B.M.; BENNETT,P.V.; SUTHERLAND, J.C.

    2004-03-24

    Physical and chemical agents in the environment, those used in clinical applications, or encountered during recreational exposures to sunlight, induce damages in DNA. Understanding the biological impact of these agents requires quantitation of the levels of such damages in laboratory test systems as well as in field or clinical samples. Alkaline gel electrophoresis provides a sensitive (down to {approx} a few lesions/5Mb), rapid method of direct quantitation of a wide variety of DNA damages in nanogram quantities of non-radioactive DNAs from laboratory, field, or clinical specimens, including higher plants and animals. This method stems from velocity sedimentation studies of DNA populations, and from the simple methods of agarose gel electrophoresis. Our laboratories have developed quantitative agarose gel methods, analytical descriptions of DNA migration during electrophoresis on agarose gels (1-6), and electronic imaging for accurate determinations of DNA mass (7-9). Although all these components improve sensitivity and throughput of large numbers of samples (7,8,10), a simple version using only standard molecular biology equipment allows routine analysis of DNA damages at moderate frequencies. We present here a description of the methods, as well as a brief description of the underlying principles, required for a simplified approach to quantitation of DNA damages by alkaline gel electrophoresis.

  14. Comparative Two-Dimensional Fluorescence Gel Electrophoresis.

    Science.gov (United States)

    Ackermann, Doreen; König, Simone

    2018-01-01

    Two-dimensional comparative fluorescence gel electrophoresis (CoFGE) uses an internal standard to increase the reproducibility of coordinate assignment for protein spots visualized on 2D polyacrylamide gels. This is particularly important for samples, which need to be compared without the availability of replicates and thus cannot be studied using differential gel electrophoresis (DIGE). CoFGE corrects for gel-to-gel variability by co-running with the sample proteome a standardized marker grid of 80-100 nodes, which is formed by a set of purified proteins. Differentiation of reference and analyte is possible by the use of two fluorescent dyes. Variations in the y-dimension (molecular weight) are corrected by the marker grid. For the optional control of the x-dimension (pI), azo dyes can be used. Experiments are possible in both vertical and horizontal (h) electrophoresis devices, but hCoFGE is much easier to perform. For data analysis, commercial software capable of warping can be adapted.

  15. Unusual reversible elastomeric gels from Nostoc commune.

    Science.gov (United States)

    Rodriguez, Sol; Gonzales, Karen N; Romero, Eduardo G; Troncoso, Omar P; Torres, Fernando G

    2017-04-01

    Nostoc commune cyanobacteria grow in extreme conditions of desiccation and nutrient-poor soils. Their colonies form spherical gelatinous bodies are composed of a variety of polysaccharides that allow them to store water and nutrients. In this paper, we study this type of biological gel that shows characteristics of both chemical and physical gels. The structure of this gel was assessed by means of scanning electron microscopy, plate-plate rheometry, Fourier transform infrared spectroscopy and absorption/desorption tests. The storage modulus of this gel was found to be frequency independent, as is usual for chemical gels. The stress sweeps showed a reversible stress softening behaviour that was explained in terms of the physical nature of the interactions of this network. The high density of physical crosslinks probably allows this physical network to behave as a highly elastomeric chemical network, limiting the relaxation of individual chains. On the other hand, reversibility is associated with the physical nature of its bonds. Copyright © 2017 Elsevier B.V. All rights reserved.

  16. Polymethacrylate microparticles gel for topical drug delivery.

    Science.gov (United States)

    Labouta, Hagar Ibrahim; El-Khordagui, Labiba K

    2010-10-01

    Evaluating the potentials of particulate delivery systems in topical drug delivery. Polymethacrylate microparticles (MPs) incorporating verapamil hydrochloride (VRP) as a model hydrophilic drug with potential topical clinical uses, using Eudragit RS100 and Eudragit L100 were prepared for the formulation of a composite topical gel. The effect of initial drug loading, polymer composition, particularly the proportion of Eudragit L100 as an interacting polymer component and the HLB of the dispersing agent on MPs characteristics was investigated. A test MPs formulation was incorporated in gel and evaluated for drug release and human skin permeation. MPs showed high % incorporation efficiency and % yield. Composition of the hybrid polymer matrix was a main determinant of MPs characteristics, particularly drug release. Factors known to influence drug release such as MPs size and high drug solubility were outweighed by strong VRP-Eudragit L100 interaction. The developed MPs gel showed controlled VRP release and reduced skin retention compared to a free drug gel. Topical drug delivery and skin retention could be modulated using particulate delivery systems. From a practical standpoint, the VRP gel developed may offer advantage in a range of dermatological conditions, in response to the growing off-label topical use of VRP.

  17. New polymer gel dosimeters consisting of less toxic monomers with radiation-crosslinked gel matrix

    Science.gov (United States)

    Hiroki, A.; Yamashita, S.; Sato, Y.; Nagasawa, N.; Taguchi, M.

    2013-06-01

    New polymer gel dosimeters consisting of less toxic methacrylate-type monomers such as 2-hydroxymethyl methacrylate (HEMA) and polyethylene glycol 400 dimethacrylate (9G) with hydroxypropyl cellulose (HPC) gel were prepared. The HPC gels were obtained by using a radiation-induced crosslinking technique to be applied in a matrix instead of a gelatin, which is conventionally used in earlier dosimeters, for the polymer gel dosimeters. The prepared polymer gel dosimeters showed cloudiness by exposing to 60Co γ-ray, in which the cloudiness increased with the dose up to 10 Gy. At the same dose, the increase in the cloudiness appeared with increasing concentration of 9G. As a result of the absorbance measurement, it was found that the dose response depended on the composition ratio between HEMA and 9G.

  18. Simultaneous immunoblotting analysis with activity gel electrophoresis and 2-D gel electrophoresis.

    Science.gov (United States)

    Lee, Der-Yen; Chang, Geen-Dong

    2015-01-01

    Diffusion blotting method can couple immunoblotting analysis with another biochemical technique in a single polyacrylamide gel, however, with lower transfer efficiency as compared to the conventional electroblotting method. Thus, with diffusion blotting, protein blots can be obtained from an SDS polyacrylamide gel for zymography assay, from a native polyacrylamide gel for electrophoretic mobility shift assay (EMSA) or from a 2-D polyacrylamide gel for large-scale screening and identification of a protein marker. Thereafter, a particular signal in zymography, electrophoretic mobility shift assay, and 2-dimensional gel can be confirmed or identified by simultaneous immunoblotting analysis with a corresponding antiserum. These advantages make diffusion blotting desirable when partial loss of transfer efficiency can be tolerated or be compensated by a more sensitive immunodetection reaction using enhanced chemiluminescence detection.

  19. SURFACE DYNAMIC FRICTION OF POLYMER GELS

    Institute of Scientific and Technical Information of China (English)

    J.P.Gong; G.Kagata; Y.Iwasaki; Y.Osada

    2000-01-01

    The sliding friction of various kinds of hydrogels has been studied and it was found that the frictional behaviors of the hydrogels do not conform to Amonton's law F =μW which well describes the friction of solids. The frictional force and its dependence on the load are quite different depending on the chemical structures of the gels, surface properties of the opposing substrates, and the measurement condition. The gel friction is explained in terms of interfacial interaction, either attractive or repulsive, between the polymer chain and the solid surface. According to this model, the friction is ascribed to the viscous flow of solvent at the interface in the repulsive case. In the attractive case, the force to detach the adsorbing chain from the substrate appears as friction. The surface adhesion between glass particles and gels measured by AFM showed a good correlation with the friction, which supported the repulsion-adsorption model proposed by the authors.

  20. Carbon gels derived from natural resources

    Directory of Open Access Journals (Sweden)

    A. Celzard

    2012-12-01

    Full Text Available Most carbon gels investigated so far and reportedin the literature were prepared from resorcinolcrosslinked with formaldehyde in water, and weregenerally dried with supercritical CO2 before beingpyrolysed. In the present paper, through someselected examples, we show how valuable carbongels can be derived from other phenolic resourceshaving a natural origin. Special emphasis is givento tannin and lignin, both derived from wood, aspotential precursors of carbon aero- and cryogels.However, natural compounds not obeying the usualconcepts of sol-gel chemistry may also be used forpreparing carbon gels, such as cellulose, and evenglucose. In the latter case, hydrothermal treatmentforces the phase separation to occur, and leads tomonoliths which can be advantageously convertedinto carbon aerogels by supercritical drying andsubsequent pyrolysis.

  1. On the scattering properties of polyelectrolyte gels

    Science.gov (United States)

    Barrat, Jean-Louis; Joanny, Jean-François; Pincus, Phil

    1992-08-01

    We present a simple model for scattering properties of polyelectrolyte gels at swelling equilibrium. In the weak screening limit where the Debye-Hückel screening length is larger than the mesh size of the gel, the direct electrostatic interactions are negligible and the swelling is driven by the osmotic pressure of the counterions. The tension created by this pressure is transmitted through the crosslinks to the elastic chains which behave as isolated chains with an applied force at their end points. The structure factor of the gel can be split into a frozen component due to the average concentration heterogeneities and a thermodynamic component due to concentration fluctuations. The frozen component has a peak at a wavevector of the order of the mesh size of the gel, the thermodynamic component has a peak at a higher wavevector of the order of the inverse transverse radius of the chains. At infinite times the dynamic structure factor relaxes towards the frozen component of the static structure factor. In the limit of small wavevectors the relaxation is diffusive with a diffusion constant equal to the Stokes diffusion constant of the Pincus blobs of the stretched chains. The diffusion constant shows a minimum at a wavevector of the order of the inverse transverse radius of the chains. Nous présentons un modèle simple pour étudier la diffusion de rayonnement par des gels polylectrolytes à l'équilibre de gonflement. Dans la limite d'écrantage faible où la longueur d'écran de Debye-Hückel est plus grande que la maille du gel, les interactions électrostatiques directes sont négligeables et le gonflement est dû à la pression osmotique des contreions. La tension créée par cette pression est transmise par les noeuds du gel aux chaines élastiques qui se comportent comme des chaines isolées avec une force extérieure appliquée aux extrémités. Le facteur de structure du gel est la somme d'une composante gelée due aux hétérogénéités de concentration

  2. Synthesis and Characteristics of Organic Bentonite Gel

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The bentonite was modified using Ca-bentonite as a matrix and octadecyl/ hexadecyl ammoniumsized by dispersing it into the dimethyl benzene-methyl alcohol system fully.The optimum process conditions for organic modification were that the coating agent dosage is 22g/L, reaction time is 90 minutes and the pH value of pulp is 10.X-ray diffraction ( XRD ) analysis indicates that the d (001) value of the modified bentonite is 20.532A.The influence of gel temperature on its viscosity characteristic was studied.By analyzing the transmssion electron microscopy (TEM) images and observing the dispersed gel, the nanometer effect of the organic gel was discussed.

  3. A New Standard-Based Polynomial Interpolation (SBPIn) method to address gel-to-gel variability for the comparison of multiple denaturing gradient gel electrophoresis profile matrices.

    Science.gov (United States)

    Valentín-Vargas, Alexis; Chorover, Jon; Maier, Raina M

    2013-02-15

    The Standard-Based Polynomial Interpolation (SBPIn) method is a new simple three-step protocol proposed to address common gel-to-gel variations for the comparison of sample profiles across multiple DGGE gels. The advantages of this method include no requirement for additional software or modification of the standard DGGE protocol.

  4. A New Standard-Based Polynomial Interpolation (SBPIn) Method to Address Gel-to-Gel Variability for the Comparison of Multiple Denaturing Gradient Gel Electrophoresis Profile Matrices

    Science.gov (United States)

    Valentín-Vargas, Alexis; Chorover, Jon; Maier, Raina M.

    2013-01-01

    The Standard-Based Polynomial Interpolation (SBPIn) method is a new simple three-step protocol proposed to address common gel-to-gel variations for the comparison of sample profiles across multiple DGGE gels. The advantages of this method include no requirement for additional software or modification of the standard DGGE protocol. PMID:23234884

  5. Matching Two-dimensional Gel Electrophoresis' Spots

    DEFF Research Database (Denmark)

    Dos Anjos, António; AL-Tam, Faroq; Shahbazkia, Hamid Reza

    2012-01-01

    This paper describes an approach for matching Two-Dimensional Electrophoresis (2-DE) gels' spots, involving the use of image registration. The number of false positive matches produced by the proposed approach is small, when compared to academic and commercial state-of-the-art approaches. This ar......This paper describes an approach for matching Two-Dimensional Electrophoresis (2-DE) gels' spots, involving the use of image registration. The number of false positive matches produced by the proposed approach is small, when compared to academic and commercial state-of-the-art approaches...

  6. Hybrid sol-gel optical materials

    Science.gov (United States)

    Zeigler, John M.

    1992-01-01

    Hybrid sol-gel materials comprise silicate sols cross-linked with linear polysilane, polygermane, or poly(silane-germane). The sol-gel materials are useful as optical identifiers in tagging and verification applications and, in a different aspect, as stable, visible light transparent non-linear optical materials. Methyl or phenyl silicones, polyaryl sulfides, polyaryl ethers, and rubbery polysilanes may be used in addition to the linear polysilane. The linear polymers cross-link with the sol to form a matrix having high optical transparency, resistance to thermooxidative aging, adherence to a variety of substrates, brittleness, and a resistance to cracking during thermal cycling.

  7. Sol-gel synthesis of lithium aluminate

    Energy Technology Data Exchange (ETDEWEB)

    Valenzuela, M.A. [Inst. Politecnico Nacional, Mexico City (Mexico); Jimenez-Becerril, J. [Inst. Nacional de Investigaciones Nucleares, Mexico City (Mexico). Dept. de Quimica]|[Univ. Autonoma Metropolitana, Iztapalapa (Mexico). Dept. de Quimica; Bulbulian, S. [Inst. Nacional de Investigaciones Nucleares, Mexico City (Mexico). Dept. de Quimica; Lara, V.H. [Univ. Autonoma Metropolitana, Iztapalapa (Mexico). Dept. de Quimica

    1996-02-01

    LiAlO{sub 2} was prepared by two sol-gel methods using simultaneous hydrolysis of the reagents: aluminum sec-butoxide/lithium methoxide and aluminum sec-butoxide/LiOH. The resulting ceramic powders were compared with those prepared by two conventional methods (i.e., solid-state fusion and peroxide). The sol-gel method provided powders with a very high {gamma}-LiAlO{sub 2} content after calcining at temperatures as low as 700 C when LiOH was used. The solids were characterized by AAS, DTA, TGA, XRD, and SEM.

  8. Ordering phenomena in ABA triblock copolymer gels

    DEFF Research Database (Denmark)

    Reynders, K.; Mischenko, N.; Kleppinger, R.

    1997-01-01

    Temperature and concentration dependencies of the degree of order in ABA triblock copolymer gels are discussed. Two factors can influence the ordering phenomena: the conformation of the midblocks (links of the network) and the polydispersity of the endblock domains (nodes of the network). The lat......Temperature and concentration dependencies of the degree of order in ABA triblock copolymer gels are discussed. Two factors can influence the ordering phenomena: the conformation of the midblocks (links of the network) and the polydispersity of the endblock domains (nodes of the network...

  9. Aplicações sinteticas de enzimas imobiliadas em organo-gel e gel de agar

    OpenAIRE

    Queiroz, Neide

    1997-01-01

    Dissertação (mestrado) - Universidade Federal de Santa Catarina, Centro de Ciencias Fisicas e Matematicas As microemulsões água-em-óleo (água + óleo + surfactante) podem ser utilizadas para formar géis elásticos e termoreversíveis pela adição de gelatina. Este sistema é chamado de organo-gel ou MBG (do inglês, "microemulsion-based gels"). As mudanças que ocorrem no organo-gel, quanto a sua estabilidade, foram observadas fixando a concentração do surfactante AOT (di-2-etilhexil sulfosuccina...

  10. Multiple-phase behavior and memory effect of polymer gel

    CERN Document Server

    Annaka, M; Nakahira, T; Sugiyama, M; Hara, K; Matsuura, T

    2002-01-01

    A poly(4-acrylamidosalicylic acid) gel (PASA gel) exhibits multiple phases as characterized by distinct degrees of swelling; the gel can take one of four different swelling values, but none of the intermediate values. The gel has remarkable memory: the phase behavior of the gel depends on whether the gel has experienced the most swollen phase or the most collapsed phase in the immediate past. The information is stored and reversibly erased in the form of a macroscopic phase transition behavior. The structure factors corresponding to these four phases were obtained by SANS, which indicated the presence of characteristic structures depending on pH and temperature, particularly in the shrunken state. (orig.)

  11. Rheological properties of polymer micro-gel dispersions

    Institute of Scientific and Technical Information of China (English)

    Dong Zhaoxia; Li Yahua; Lin Meiqin; Li Mingyuan

    2009-01-01

    The influence of swelling time, temperature, NaCI concentration and polymer micro-gel concentration on rheological properties of polymer micro-gel dispersions was studied by using a HAAKE rheometer. The results showed that with increasing swelling time and NaCI concentration, the polymer micro-gel dispersions changed from a shear-thickening fluid to a Newtonian fluid. The polymer micro- gel dispersion show shear-thinning in non-saline water. At higher swelling temperature, the time of the polymer micro-gel dispersion showing shear-thickening was shorter. With increasing polymer micro-gel concentration, the dispersion changed from shear-thickening to shear-thinning.

  12. The mechanism and properties of acid-coagulated milk gels

    Directory of Open Access Journals (Sweden)

    Chanokphat Phadungath

    2005-03-01

    Full Text Available Acid-coagulated milk products such as fresh acid-coagulated cheese varieties and yogurt areimportant dairy food products. However, little is known regarding the mechanisms involved in gel formation, physical properties of acid gels, and the effects of processing variables such as heat treatment and gelation temperature on the important physical properties of acid milk gels. This paper reviews the modern concepts of possible mechanisms involved in the formation of particle milk gel aggregation, along with recent developments including the use of techniques such as dynamic low amplitude oscillatory rheology to observe the gel formation process, and confocal laser scanning microscopy to monitor gel microstructure.

  13. Protein electrophoretic migration data from custom and commercial gradient gels

    Directory of Open Access Journals (Sweden)

    Andrew J. Miller

    2016-12-01

    Full Text Available This paper presents data related to the article “A method for easily customizable gradient gel electrophoresis” (A.J. Miller, B. Roman, E.M. Norstrom, 2016 [1]. Data is presented on the rate of electrophoretic migration of proteins in both hand-poured and commercially acquired acrylamide gradient gels. For each gel, migration of 9 polypeptides of various masses was measured upon completion of gel electrophoresis. Data are presented on the migration of proteins within separate lanes of the same gel as well as migration rates from multiple gels.

  14. Formation of macroporous gel morphology by phase separation in the silica sol-gel system containing nonionic surfactant

    Institute of Scientific and Technical Information of China (English)

    Junsheng Wu; Xiaogang Li; Wei Du; Hua Chen

    2005-01-01

    The phase separation and gel formation behavior in an alkoxy-derived silica sol-gel system containing Ci6EOi5 has been investigated. Various gel morphologies similar to other sol-gel systems containing organic additives were obtained by changing the preparation conditions. Micrometer-range interconnected porous gels were obtained by freezing transitional structures of phase separation in the sol-gel process. The dependence of the resulting gel morphology on several important reaction parameters such as the starting composition, reaction temperature and acid catalyst concentration was studied in detail. The experimental results indicate that the gel morphology is mainly determined by the time relation between the onset of phase separation and gel formation.

  15. Effectiveness of Gel Repellents on Feral Pigeons

    Directory of Open Access Journals (Sweden)

    Birte Stock

    2013-12-01

    Full Text Available Millions of feral pigeons (Columba livia live in close association with the human population in our cities. They pose serious health risks to humans and lead to high economic loss due to damage caused to buildings. Consequently, house owners and city authorities are not willing to allow pigeons on their buildings. While various avian repellents are regularly introduced onto the market, scientific proof of efficacy is lacking. This study aimed at testing the effectiveness of two avian gel repellents and additionally examined their application from animal welfare standpoint. The gels used an alleged tactile or visual aversion of the birds, reinforced by additional sensory cues. We mounted experimental shelves with the installed repellents in a pigeon loft and observed the behavior of free-living feral pigeons towards the systems. Both gels showed a restricted, transient repellent effect, but failed to prove the claimed complete effectiveness. Additionally, the gels’ adhesive effect remains doubtful in view of animal welfare because gluing of plumage presents a risk to feral pigeons and also to other non-target birds. This study infers that both gels lack the promised complete efficacy, conflict with animal welfare concerns and are therefore not suitable for feral pigeon management in urban areas.

  16. Gels for the conservation of cultural heritage.

    Science.gov (United States)

    Baglioni, Piero; Dei, Luigi; Carretti, Emiliano; Giorgi, Rodorico

    2009-08-04

    Gels are becoming one of the most important tools for the conservation of cultural heritage. They are very versatile systems and can be easily adapted to the cleaning and consolidation of works of art. This perspective reviews the major achievements in the field and suggests possible future developments.

  17. Sol-Gel Derived Hafnia Coatings

    Science.gov (United States)

    Feldman, Jay D.; Stackpoole, Mairead; Blum, Yigal; Sacks, Michael; Ellerby, Don; Johnson, Sylvia M.; Venkatapathy, Ethiras (Technical Monitor)

    2002-01-01

    Sol-gel derived hafnia coatings are being developed to provide an oxidation protection layer on ultra-high temperature ceramics for potential use in turbine engines (ultra-efficient engine technology being developed by NASA). Coatings using hafnia sol hafnia filler particles will be discussed along with sol synthesis and characterization.

  18. Sol-Gel Synthesis Of Aluminoborosilicate Powders

    Science.gov (United States)

    Bull, Jeffrey; Leiser, Daniel; Selvaduray, Guna

    1992-01-01

    Application of sol-gel process to synthesis of aluminoborosilicate powders shows potential for control of microstructures of materials. Development of materials having enhanced processing characteristics prove advantageous in extending high-temperature endurance of fibrous refractory composite insulation made from ceramic fibers.

  19. Drying and Rehydration of Calcium Alginate Gels

    NARCIS (Netherlands)

    Vreeker, R.; Li, L.; Fang, Y.; Appelqvist, I.; Mendes, E.

    2008-01-01

    In this paper, we study the rehydration properties of air-dried calcium alginate gel beads. Rehydration is shown to depend on alginate source (i.e. mannuronic to guluronic acid ratio) and the salt concentration in the rehydration medium. Rehydration curves are described adequately by the empirical W

  20. Non-diffusing radiochromic micelle gel

    Science.gov (United States)

    Jordan, Kevin; Sekimoto, Masaya

    2010-11-01

    The addition of Laponite, a synthetic clay nanoparticle material to radiochromic leuco Malachite Green micelle hydrogel eliminates diffusion of the cationic dye by electrostatic binding. The clay nanoparticles also increased dose sensitivity ten-fold relative to the parent gel formulation. This material is a suitable 3D water equivalent dosimeter with optical CT readout.

  1. Dynamic pressure transmission through agarose gels

    NARCIS (Netherlands)

    Berglund, LJ; An, KN; O'Driscoll, SW

    2000-01-01

    In biomedical research, agarose gel is widely used in tissue culture systems because it permits growing cells and tissues in a three-dimensional suspension. This is especially important in the application of tissue engineering concepts to cartilage repair because it supports the cartilage phenotype.

  2. Dynamic pressure transmission through agarose gels

    NARCIS (Netherlands)

    Berglund, LJ; An, KN; O'Driscoll, SW

    2000-01-01

    In biomedical research, agarose gel is widely used in tissue culture systems because it permits growing cells and tissues in a three-dimensional suspension. This is especially important in the application of tissue engineering concepts to cartilage repair because it supports the cartilage phenotype.

  3. Simple Cloud Chambers Using Gel Ice Packs

    Science.gov (United States)

    Kamata, Masahiro; Kubota, Miki

    2012-01-01

    Although cloud chambers are highly regarded as teaching aids for radiation education, school teachers have difficulty in using cloud chambers because they have to prepare dry ice or liquid nitrogen before the experiment. We developed a very simple and inexpensive cloud chamber that uses the contents of gel ice packs which can substitute for dry…

  4. Drying and Rehydration of Calcium Alginate Gels

    NARCIS (Netherlands)

    Vreeker, R.; Li, L.; Fang, Y.; Appelqvist, I.; Mendes, E.

    2008-01-01

    In this paper, we study the rehydration properties of air-dried calcium alginate gel beads. Rehydration is shown to depend on alginate source (i.e. mannuronic to guluronic acid ratio) and the salt concentration in the rehydration medium. Rehydration curves are described adequately by the empirical

  5. The charge transport in polymeric gel electrolytes

    CERN Document Server

    Reiche, A

    2001-01-01

    The aim of the present thesis consisted in the study of the charge transport in gel electrolytes, which were obtained by photopolymerization of oligo(ethylene glycol) sub n -dimethacrylates with n=3, 9, and 23, and the survey of structure and property relations for the optimization of the electrolyte composition. The pressure dependence of the electric conductivity was measured. (HSI)

  6. Screening of mucoadhesive vaginal gel formulations

    Directory of Open Access Journals (Sweden)

    Ana Ochoa Andrade

    2014-12-01

    Full Text Available Rational design of vaginal drug delivery formulations requires special attention to vehicle properties that optimize vaginal coating and retention. The aim of the present work was to perform a screening of mucoadhesive vaginal gels formulated with carbomer or carrageenan in binary combination with a second polymer (carbomer, guar or xanthan gum. The gels were characterised using in vitroadhesion, spreadability and leakage potential studies, as well as rheological measurements (stress and frequency sweep tests and the effect of dilution with simulated vaginal fluid (SVF on spreadability. Results were analysed using analysis of variance and multiple factor analysis. The combination of polymers enhanced adhesion of both primary gelling agents, carbomer and carrageenan. From the rheological point of view all formulations presented a similar behaviour, prevalently elastic and characterised by loss tangent values well below 1. No correlation between rheological and adhesion behaviour was found. Carbomer and carrageenan gels containing the highest percentage of xanthan gum displayed good in vitro mucoadhesion and spreadability, minimal leakage potential and high resistance to dilution. The positive results obtained with carrageenan-xanthan gum-based gels can encourage the use of natural biocompatible adjuvants in the composition of vaginal products, a formulation field that is currently under the synthetic domain.

  7. 3D gel printing for soft-matter systems innovation

    Science.gov (United States)

    Furukawa, Hidemitsu; Kawakami, Masaru; Gong, Jin; Makino, Masato; Kabir, M. Hasnat; Saito, Azusa

    2015-04-01

    In the past decade, several high-strength gels have been developed, especially from Japan. These gels are expected to use as a kind of new engineering materials in the fields of industry and medical as substitutes to polyester fibers, which are materials of artificial blood vessels. We consider if various gel materials including such high-strength gels are 3D-printable, many new soft and wet systems will be developed since the most intricate shape gels can be printed regardless of the quite softness and brittleness of gels. Recently we have tried to develop an optical 3D gel printer to realize the free-form formation of gel materials. We named this apparatus Easy Realizer of Soft and Wet Industrial Materials (SWIM-ER). The SWIM-ER will be applied to print bespoke artificial organs, including artificial blood vessels, which will be possibly used for both surgery trainings and actual surgery. The SWIM-ER can print one of the world strongest gels, called Double-Network (DN) gels, by using UV irradiation through an optical fiber. Now we also are developing another type of 3D gel printer for foods, named E-Chef. We believe these new 3D gel printers will broaden the applications of soft-matter gels.

  8. Synthetic and Biopolymer Gels - Similarities and Difference.

    Science.gov (United States)

    Horkay, Ferenc

    2006-03-01

    Ion exchange plays a central role in a variety of physiological processes, such as nerve excitation, muscle contraction and cell locomotion. Hydrogels can be used as model systems for identifying fundamental chemical and physical interactions that govern structure formation, phase transition, etc. in biopolymer systems. Polyelectrolyte gels are particularly well-suited to study ion-polymer interactions because their structure and physical-chemical properties (charge density, crosslink density, etc) can be carefully controlled. They are sensitive to different external stimuli such as temperature, ionic composition and pH. Surprisingly few investigations have been made on polyelectrolyte gels in salt solutions containing both monovalent and multivalent cations. We have developed an experimental approach that combines small angle neutron scattering and osmotic swelling pressure measurements. The osmotic pressure exerted on a macroscopic scale is a consequence of changes occurring at a molecular level. The intensity of the neutron scattering signal, which provides structural information as a function of spatial resolution, is directly related to the osmotic pressure. We have found a striking similarity in the scattering and osmotic behavior of polyacrylic acid gels and DNA gels swollen in nearly physiological salt solutions. Addition of calcium ions to both systems causes a sudden volume change. This volume transition, which occurs when the majority of the sodium counterions are replaced by calcium ions, is reversible. Such reversibility implies that the calcium ions are not strongly bound by the polyanion, but are free to move along the polymer chain, which allows these ions to form temporary bridges between negative charges on adjacent chains. Mechanical measurements reveal that the elastic modulus is practically unchanged in the calcium-containing gels, i.e., ion bridging is qualitatively different from covalent crosslinks.

  9. Enhanced sensitivity RNA gel loading buffer that enables efficient RNA separation on native gels.

    Science.gov (United States)

    Gregg, Keqin; Zhou, Wenli; Ji, Wan; Davis, Sara

    2004-02-01

    RNA gel analysis is essential for quality assessment of RNA preparations for subsequent analysis such as microarrays and real-time PCRs. The routinely used standard electrophoresis of RNA through formaldehyde-containing agarose gels is not only labor-intensive and time-consuming, but also involves sizeable quantities of hazardous materials. Above all, it is not sensitive, requiring more than 1 microgram of RNA for the assay. Current gene expression profiling with microarrays and real-time PCR often involves limiting amounts of RNA. It is therefore important to have a more sensitive way to analyze RNA. Here we report an improved ethidium bromide-based RNA gel analysis system with our Superload buffer that increases sensitivity to 12.5 ng of total RNA and allows RNA analysis on a regular native Tris-acetate EDTA (TAE) agarose gel.

  10. Combined rheological and ultrasonic study of alginate and pectin gels near the sol-gel transition.

    Science.gov (United States)

    Audebrand, Michel; Kolb, Max; Axelos, Monique A V

    2006-10-01

    The sol-gel transition of biopolymer mixtures has been investigated by rheological and ultrasonic measurements. A scaling analysis of the data was performed for both types of measurements. A gel time was determined from rheology for the pure pectin samples, and the data could be fitted to a universal scaling form near the transition point. Its critical exponents are in good agreement with the predictions of scalar percolation theory. In addition, the ultrasonic signal of the pectin samples close to the transition was analyzed in terms of a high-frequency scaling approach for the attenuation and the velocity. For the alginate samples and the mixtures, for which the gel point cannot be determined reliably from rheology, the ultrasonic measurements were analyzed using the same scaling form as for the pectin sample, thus providing a method for estimating the gel point, even in the absence of rheological data.

  11. Silicone Gel-Filled Breast Implants: Updated Safety Information

    Science.gov (United States)

    ... For Consumers Home For Consumers Consumer Updates Silicone Gel-Filled Breast Implants: Updated Safety Information Share Tweet ... When the Food and Drug Administration allowed silicone gel-filled breast implants back on the market in ...

  12. Preparation and swelling behavior of polyvinyl alcohol physiological saline gel

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Polyvinyl alcohol(PVA) physiological saline gel was prepared using physiological saline solution of the polymer by freezing and thawing method. The influences of the concentration of PVA, freezing and thawing cycle times and solvent swelling media on the swelling properties of PVA saline gel were investigated. The result show that the electrolytical ions have great effect on the swelling behavior of PVA saline gel. The equilibrium swelling ratio of PVA saline gel in aqueous swelling media is larger than that in saline swelling media. Also, the equilibrium swelling ratios of PVA saline gel in aqueous and in saline media decrease with the increase of gel concentration and the increase of freezing and thawing cycle times. The decreasing speed of equilibrium swelling ratio with the increase of freezing and thawing cycle times of PVA gel in distilled water is faster than that in physiological saline. The swelling kinetic equation can sufficiently describe the swelling behavior of PVA physiological saline gel.

  13. Optical Anisotropy and Molecular Orientation of Neutralized Curdlan Gels

    National Research Council Canada - National Science Library

    Yasuyuki Maki; Hideki Okamura; Toshiaki Dobashi

    2017-01-01

    Curdlan gels were prepared by dialyzing its alkaline solutions in HCl solutions, and its optical anisotropy and molecular orientation in the gel were investigated by birefringence and small-angle X-ray scattering (SAXS...

  14. ZONE ELECTROPHORESIS OF HUMAN PAROTID SALIVA IN ACRYLAMIDE GEL,

    Science.gov (United States)

    anodically with generally better resolution than is evident for the cathodically-migrating components. Salivary amylase , a troublesome factor in the starch -gel electrophoresis of saliva proteins, does not attack acrylamide gel.

  15. Intrathecal Delivery of Ketorolac Loaded In Situ Gels for Prolonged ...

    African Journals Online (AJOL)

    in situ gel near the fractured vertebra in a rat model). ... The formulated in situ gels can potentially be used as implants for the treatment of .... xanthan gum orally in an appropriate volume. ..... polyelectrolyte alginate-chitosan complex based.

  16. Establishment of gel materials with different mechanical properties by 3D gel printer SWIM-ER

    Science.gov (United States)

    Ota, Takafumi; Tase, Taishi; Okada, Koji; Saito, Azusa; Takamatsu, Kyuuichiro; Kawakami, Masaru; Furukawa, Hidemitsu

    2016-04-01

    A 3D printer is a device which can directly produce objects whose shape is the same as the original 3D digital data. Hydrogels have unique properties such as high water content, low frictional properties, biocompatibility, material permeability and high transparency, which are rare in hard and dry materials. These superior characteristics of gels promise useful medical applications. We have been working on the development of a 3D gel printer, SWIM-ER (Soft and Wet Industrial - Easy Realizer), which can make models of organs and artificial blood vessels with gel material. However, 3D printing has a problem: the mechanical properties of the printed object vary depending on printing conditions, and this matter was investigated with SWIM-ER. In the past, we found that mechanical properties of 3D gel objects depend on the deposition orientation in SWIM-ER. In this study, gels were printed with different laser scanning speeds. The mechanical properties of these gels were investigated by compression tests, water content measurements and SMILS (Scanning Microscopic Light Scattering).

  17. A multistimuli-responsive photochromic metal-organic gel.

    Science.gov (United States)

    Wei, Shi-Chao; Pan, Mei; Li, Kang; Wang, Sujuan; Zhang, Jianyong; Su, Cheng-Yong

    2014-04-02

    A photochromic metal-organic gel with thermo-, photo-, and anion-responsive behavior is obtained. Unusually, heating of the Al-ligand solution leads to gel formation and cooling to room temperature reverses the process to reform the solution. The gel is sensitive to weakly coordinating anions. Additionally, reversible photochromic transformations take place both in the solution and gel states, accompanied by reversibly switched luminescence.

  18. Gel-forming reagents and uses thereof for preparing microarrays

    Science.gov (United States)

    Golova, Julia; Chernov, Boris; Perov, Alexander

    2010-11-09

    New gel-forming reagents including monomers and cross-linkers, which can be applied to gel-drop microarray manufacturing by using co-polymerization approaches are disclosed. Compositions for the preparation of co-polymerization mixtures with new gel-forming monomers and cross-linker reagents are described herein. New co-polymerization compositions and cross-linkers with variable length linker groups between unsaturated C.dbd.C bonds that participate in the formation of gel networks are disclosed.

  19. CURRENT COLLOIDAL DISPERSION GELS ARE NOT SUPERIOR TO POLYMER FLOODING

    Institute of Scientific and Technical Information of China (English)

    Seright Randy; Han Peihui; Wang Dongmei

    2006-01-01

    The suggestion that the colloidal-dispersion-gel (CDG) process is superior to normal polymer flooding is misleading and generally incorrect. Colloidal dispersion gels, in their present state of technological development, should not be advocated as an improvement to, or substitute for, polymer flooding. Gels made from aluminum-citrate crosslinked polyacrylamides can act as conventional gels and provide effective conformance improvement in treating some types of excess water production problems if sound scientific and engineering principles are respected.

  20. Highly Elastic and Self-Healing Composite Colloidal Gels.

    Science.gov (United States)

    Diba, Mani; Wang, Huanan; Kodger, Thomas E; Parsa, Shima; Leeuwenburgh, Sander C G

    2017-03-01

    Composite colloidal gels are formed by the pH-induced electrostatic assembly of silica and gelatin nanoparticles. These injectable and moldable colloidal gels are able to withstand substantial compressive and tensile loads, and exhibit a remarkable self-healing efficiency. This study provides new, critical insight into the structural and mechanical properties of composite colloidal gels and opens up new avenues for practical application of colloidal gels.

  1. Photochromic properties of spirooxazine dyes in ormocer gels and coatings

    OpenAIRE

    Hou, Lisong; Mennig, Martin; Schmidt, Helmut K.

    1992-01-01

    The wet- and "cold"-chemical characteristic of sol-gel process makes the sol-gel derived materials offer exciting potentials as hosts for photochromic dyes. In the present work, using mixed organically modified silicon alkoxides as starting compounds a novel ORMOCER material has been prepared via the sol-gel process as a host for spirooxazines. The photochromic properties of the dyes in the ORMOCER gel and coating are compared with those in ethanol. The experimental results show that both the...

  2. 21 CFR 520.1720d - Phenylbutazone gel.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Phenylbutazone gel. 520.1720d Section 520.1720d... DRUGS, FEEDS, AND RELATED PRODUCTS ORAL DOSAGE FORM NEW ANIMAL DRUGS § 520.1720d Phenylbutazone gel. (a) Specifications. Each 30 grams of gel contains 4 grams of phenylbutazone. (b) Sponsor. See No. 061623 in §...

  3. 21 CFR 520.1453 - Moxidectin and praziquantel gel.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Moxidectin and praziquantel gel. 520.1453 Section 520.1453 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... and praziquantel gel. (a) Specifications. Each milliliter of gel contains 20 milligrams (mg)...

  4. 21 CFR 520.1242f - Levamisole hydrochloride gel.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Levamisole hydrochloride gel. 520.1242f Section 520.1242f Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... Levamisole hydrochloride gel. (a) Specifications. The drug is a gel containing 11.5 percent...

  5. Power Law Behavior of Structural Properties of Protein Gels

    NARCIS (Netherlands)

    Verheul, Marleen; Roefs, Sebastianus P.F.M.; Mellema, Jorrit; Kruif, Kees G.

    1998-01-01

    Whey proteins are globular, heat-sensitive proteins. The gel structure, the formation of this structure, and the rheological properties of particulate whey protein isolate (WPI) gels have been investigated. On increasing the NaCl concentration, the permeability of the WPI gels increased, indicating

  6. Formulation and method for preparing gels comprising hydrous hafnium oxide

    Science.gov (United States)

    Collins, Jack L; Hunt, Rodney D; Montgomery, Frederick C

    2013-08-06

    Formulations useful for preparing hydrous hafnium oxide gels contain a metal salt including hafnium, an acid, an organic base, and a complexing agent. Methods for preparing gels containing hydrous hafnium oxide include heating a formulation to a temperature sufficient to induce gel formation, where the formulation contains a metal salt including hafnium, an acid, an organic base, and a complexing agent.

  7. Formulation and method for preparing gels comprising hydrous aluminum oxide

    Science.gov (United States)

    Collins, Jack L.

    2014-06-17

    Formulations useful for preparing hydrous aluminum oxide gels contain a metal salt including aluminum, an organic base, and a complexing agent. Methods for preparing gels containing hydrous aluminum oxide include heating a formulation to a temperature sufficient to induce gel formation, where the formulation contains a metal salt including aluminum, an organic base, and a complexing agent.

  8. Formulation and method for preparing gels comprising hydrous cerium oxide

    Science.gov (United States)

    Collins, Jack L; Chi, Anthony

    2013-05-07

    Formulations useful for preparing hydrous cerium oxide gels contain a metal salt including cerium, an organic base, and a complexing agent. Methods for preparing gels containing hydrous cerium oxide include heating a formulation to a temperature sufficient to induce gel formation, where the formulation contains a metal salt including cerium, an organic base, and a complexing agent.

  9. Antimicrobial efficacy of alcohol-based hand gels.

    Science.gov (United States)

    Guilhermetti, M; Marques Wiirzler, L A; Castanheira Facio, B; da Silva Furlan, M; Campo Meschial, W; Bronharo Tognim, M C; Botelho Garcia, L; Luiz Cardoso, C

    2010-03-01

    In recent years, several commercial alcohol-based hand gels have appeared on the market to improve the hand-cleansing compliance of healthcare workers. Although the antimicrobial efficacy of these products has been reported in different countries, few studies have investigated this subject in Brazil. In this study, we assessed the antimicrobial efficacy of 12 alcohol-based hand gels produced in Brazil, containing 70% w/w or v/v ethyl alcohol as the active ingredient, according to the European Standard EN 1500 (EN 1500). The following alcohol gels were tested: Hand Gel, Voga Gel, Solumax Solugel, Doctor Clean, Rio Gel, Clear Gel, Sevengel, Hand CHC, Gel Bac, WBL-50 Gel, Sanigel and Soft Care Gel. In addition, 70% w/w ethyl alcohol and three alcohol-based hand rubs (Sterillium, Sterillium Gel, and Spitaderm), commonly used in Europe and effective according to EN 1500, were also tested. All the products tested, except for two, were approved by the EN 1500 test protocol with a 60s application. The results confirmed the antimicrobial efficacy of the majority of the alcohol gels produced in Brazil for hand hygiene of healthcare workers.

  10. Hydroxyapatite incorporated into collagen gels for mesenchymal stem cell culture.

    Science.gov (United States)

    Laydi, F; Rahouadj, R; Cauchois, G; Stoltz, J-F; de Isla, N

    2013-01-01

    Collagen gels could be used as carriers in tissue engineering to improve cell retention and distribution in the defect. In other respect hydroxyapatite could be added to gels to improve mechanical properties and regulate gel contraction. The aim of this work was to analyze the feasibility to incorporate hydroxyapatite into collagen gels and culture mesenchymal stem cells inside it. Human bone marrow mesenchymal stem cells (hMSC-BM) were used in this study. Gels were prepared by mixing rat tail type I collagen, hydroxyapatite microparticles and MSCs. After polymerization gels were kept in culture while gel contraction and mechanical properties were studied. In parallel, cell viability and morphology were analyzed. Gels became free-floating gels contracted from day 3, only in the presence of cells. A linear rapid contraction phase was observed until day 7, then a very slow contraction phase took place. The incorporation of hydroxyapatite improved gel stability and mechanical properties. Cells were randomly distributed on the gel and a few dead cells were observed all over the experiment. This study shows the feasibility and biocompatibility of hydroxyapatite supplemented collagen gels for the culture of mesenchymal stem cells that could be used as scaffolds for cell delivery in osteoarticular regenerative medicine.

  11. Internal calibration of gel dosimeters: A feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Trapp, J V; Kairn, T; Crowe, S; Fielding, A [School of Physical and Chemical Sciences Queensland University of Technology GPO Box 2434, Brisbane 4001 (Australia)], E-mail: j.trapp@qut.edu.au

    2009-05-01

    In this work we test the feasibility of a new calibration method for gel dosimetry. We examine, through Monte Carlo modelling, whether the inclusion of an organic plastic scintillator system at key points within the gel phantom would perturb the dose map. Such a system would remove the requirement for a separate calibration gel, removing many sources of uncertainty.

  12. Transaxillary endoscopic silicone gel breast augmentation.

    Science.gov (United States)

    Strock, Louis L

    2010-09-01

    Following the return of silicone gel breast implants to the US market in 2006, augmentation with these implants has become increasingly popular. Surgeons have an array of refined techniques from which to choose when performing these procedures, many of which offer the advantage of reduced or less-obvious postoperative scarring. For obvious reasons, many patients are requesting placement of the implants through incisions that are removed from the breast area (and thereby hidden). The challenge of these approaches is to provide a level of technical control that matches what is afforded with the traditional inframammary approach. The addition of endoscopic assistance has provided a level of tissue visualization and technical control not previously possible with the transaxillary approach, with results that rival those of an inframammary procedure. In this article, the author presents his current operative technique, which has allowed for the routine placement of silicone gel breast implants through a transaxillary incision using endoscopic assistance.

  13. Gel cast foam diesel particulate filters

    Energy Technology Data Exchange (ETDEWEB)

    Binner, J.G.P.; Hughes, S. [IPTME, Loughborough Univ., Loughborough (United Kingdom); Sambrook, R.M. [Dytech Corp. Ltd., Dronfield (United Kingdom)

    2004-07-01

    A new manufacturing route for foam ceramics based on gel casting has been developed and is being commercialised. Gel casting employs an organic monomer that is polymerised to cause the in-situ gelation of a foamed aqueous ceramic slurry. The primary advantage is the inherent flexibility of the process; the foams can be near net shape manufactured in a variety of shapes and sizes and after production are simply dried and fired. In addition, the porosity and pore size distribution can be varied to suit the application and a wide range of ceramics can be foamed with densities ranging from 5-40% of theoretical. Applications are diverse and include the potential to be used as diesel particulate filters (DPF). The present work examines this and concludes that filtration efficiencies of {>=}90% are achievable without generating a significant backpressure for the engine. (orig.)

  14. Structural hierarchy governs fibrin gel mechanics.

    Science.gov (United States)

    Piechocka, Izabela K; Bacabac, Rommel G; Potters, Max; Mackintosh, Fred C; Koenderink, Gijsje H

    2010-05-19

    Fibrin gels are responsible for the mechanical strength of blood clots, which are among the most resilient protein materials in nature. Here we investigate the physical origin of this mechanical behavior by performing rheology measurements on reconstituted fibrin gels. We find that increasing levels of shear strain induce a succession of distinct elastic responses that reflect stretching processes on different length scales. We present a theoretical model that explains these observations in terms of the unique hierarchical architecture of the fibers. The fibers are bundles of semiflexible protofibrils that are loosely connected by flexible linker chains. This architecture makes the fibers 100-fold more flexible to bending than anticipated based on their large diameter. Moreover, in contrast with other biopolymers, fibrin fibers intrinsically stiffen when stretched. The resulting hierarchy of elastic regimes explains the incredible resilience of fibrin clots against large deformations.

  15. Soft Gels with Ordered Iron Particles

    Science.gov (United States)

    An, Yuxian; Liu, Bo; Shaw, Montgomery T.

    For a number of years we and others have investigated electrorheological (ER) gel systems comprising low-modulus elastomers mixed with various particles. Unlike ER fluids, the particles in gels do not change relative positions, thus creating model systems that can be used to check equilibrium theories of ER response. To make such materials, a magnetic field was used to align iron particles during the cure of a liquid silicone prepolymer in a sheet mold. Particle chains were made with as little as 0.5% particles, and aligned at angles from 0 to 45° to the normal. The gap between the particles was controlled by swelling the crosslinked material with additional prepolymer. The dependence of the ER effect on particle structuring in these materials was investigated experimentally using rheometry and dielectrometry. Also investigated were the properties of these materials as transducers and actuators.

  16. Ballistic penetration of Perma-Gel

    Science.gov (United States)

    Ryckman, Raymond Albert; Powell, David Arthur; Lew, Adrian

    2012-03-01

    In this study a number of experiments were performed by taking high-speed footage of the firing spherical steel bullets at different speeds into Perma-Gel, a new synthetic thermoplastic material touted to exhibit similar properties to ordnance ballistic gelatin. We found that the gel undergoes very large and recoverable elastic deformations, which could strongly affect the dynamics of the temporary cavity formed behind the projectile. As with ordnance ballistic gelatin, the diameter of the temporary cavity can be many times the diameter of the projectile, in contrast with that of the permanent cavity which is several times smaller.We also observed that the closure of the cavity chokes the air inside, which could affect its dynamics in noticeable ways. Finally, one of the experiments suggest that the precise model of material failure may not be important to determine the dynamics of the temporary cavity.

  17. Gel Fabrication of Molybdenum “Beads”

    Energy Technology Data Exchange (ETDEWEB)

    Lowden, Richard Andrew [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Materials Science and Technology Division; Armstrong, Beth L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Materials Science and Technology Division; Cooley, Kevin M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Materials Science and Technology Division

    2016-11-01

    Spherical molybdenum particles or “beads” of various diameters are of interest as feedstock materials for the additive manufacture of targets and assemblies used in the production of 99Mo medical isotopes using accelerator technology. Small metallic beads or ball bearings are typically fabricated from wire; however, small molybdenum spheres cannot readily be produced in this manner. Sol-gel processes are often employed to produce small dense microspheres of metal oxides across a broad diameter range that in the case of molybdenum could be reduced and sintered to produce metallic spheres. These Sol-gel type processes were examined for forming molybdenum oxide beads; however, the molybdenum trioxide was chemically incompatible with commonly used gelation materials. As an alternative, an aqueous alginate process being assessed for the fabrication of oxide spheres for catalyst applications was employed to form molybdenum trioxide beads that were successfully reduced and sintered to produce small molybdenum spheres.

  18. Ring-Resonator/Sol-Gel Interferometric Immunosensor

    Science.gov (United States)

    Bearman, Gregory; Cohen, David

    2007-01-01

    A proposed biosensing system would be based on a combination of (1) a sensing volume containing antibodies immobilized in a sol-gel matrix and (2) an optical interferometer having a ring resonator configuration. The antibodies would be specific to an antigen species that one seeks to detect. In the ring resonator of the proposed system, light would make multiple passes through the sensing volume, affording greater interaction length and, hence, greater antibody- detection sensitivity.

  19. Rheology of Biopolymer Solutions and Gels

    Directory of Open Access Journals (Sweden)

    David R. Picout

    2003-01-01

    Full Text Available Rheological techniques and methods have been employed for many decades in the characterization of polymers. Originally developed and used on synthetic polymers, rheology has then found much interest in the field of natural (bio polymers. This review concentrates on introducing the fundamentals of rheology and on discussing the rheological aspects and properties of the two major classes of biopolymers: polysaccharides and proteins. An overview of both their solution properties (dilute to semi-dilute and gel properties is described.

  20. Active nematic gels as active relaxing solids

    OpenAIRE

    Turzi, Stefano S

    2017-01-01

    I put forward a continuum theory for active nematic gels, defined as fluids or suspensions of orientable rodlike objects endowed with active dynamics, that is based on symmetry arguments and compatibility with thermodynamics. The starting point is our recent theory that models (passive) nematic liquid crystals as relaxing nematic elastomers. The interplay between viscoelastic response and active dynamics of the microscopic constituents is naturally taken into account. By contrast with standar...

  1. Epoxy Sol-Gel Hybrid Thermosets

    Directory of Open Access Journals (Sweden)

    Angels Serra

    2016-02-01

    Full Text Available Sol-gel methodologies are advantageous in the preparation of hybrid materials in front of the conventional addition of nanoparticles, because of the fine dispersion of the inorganic phase that can be reached in epoxy matrices. In addition, the use of organoalkoxysilanes as coupling agents allows covalent linkage between organic and inorganic phases, which is the key point in the improvement of mechanical properties. The sol-gel process involves hydrolysis and condensation reactions under mild conditions, starting from hydrolysable metal alkoxides, generally alkoxy silanes. Using the sol-gel procedure, the viscosity of the formulation is maintained, which is an important issue in coating applications, whereas the transparency of the polymer matrix is also maintained. However, only the proper combination of the chemistries and functionalities of both organic and inorganic structures leads to thermosets with the desired characteristics. The adequate preparation of hybrid epoxy thermosets enables their improvement in characteristics such as mechanical properties (modulus, hardness, scratch resistance, thermal and flame resistance, corrosion and antimicrobial protection, and even optical performance among others.

  2. Sol-gel method for encapsulating molecules

    Science.gov (United States)

    Brinker, C. Jeffrey; Ashley, Carol S.; Bhatia, Rimple; Singh, Anup K.

    2002-01-01

    A method for encapsulating organic molecules, and in particular, biomolecules using sol-gel chemistry. A silica sol is prepared from an aqueous alkali metal silicate solution, such as a mixture of silicon dioxide and sodium or potassium oxide in water. The pH is adjusted to a suitably low value to stabilize the sol by minimizing the rate of siloxane condensation, thereby allowing storage stability of the sol prior to gelation. The organic molecules, generally in solution, is then added with the organic molecules being encapsulated in the sol matrix. After aging, either a thin film can be prepared or a gel can be formed with the encapsulated molecules. Depending upon the acid used, pH, and other processing conditions, the gelation time can be from one minute up to several days. In the method of the present invention, no alcohols are generated as by-products during the sol-gel and encapsulation steps. The organic molecules can be added at any desired pH value, where the pH value is generally chosen to achieve the desired reactivity of the organic molecules. The method of the present invention thereby presents a sufficiently mild encapsulation method to retain a significant portion of the activity of the biomolecules, compared with the activity of the biomolecules in free solution.

  3. Sol–gel processing of carbidic glasses

    Indian Academy of Sciences (India)

    L M Manocha; E Yasuda; Y Tanabe; S Manocha; D Vashistha

    2000-02-01

    Carbon incorporation into the silicate network results in the formation of rigid carbidic glasses with improved physical, mechanical and thermal properties. This generated great interest in the development of these heteroatom structured materials through different processing routes. In the present studies, sol–gel processing has been used to prepare silicon based glasses, especially oxycarbides through organic–inorganic hybrid gels by hydrolysis–condensation reactions in silicon alkoxides, 1,4-butanediol and furfuryl alcohol with an aim to introduce Si–C linkages in the precursors at sol level. The incorporation of these linkages has been studied using IR and NMR spectroscopy. These bonds, so introduced, are maintained throughout the processing, especially during pyrolysis to high temperatures. In FFA–TEOS system, copolymerization with optimized mol ratio of the two results in resinous mass. This precursor on pyrolysis to 1000°C results in Si–O–C type amorphous solid black mass. XRD studies on the materials heated to 1400°C exhibit presence of crystalline Si–C and cristobalites in amorphous Si–O–C mass. In organic–inorganic gel system, the pyrolysed mass exhibits phase stability up to much higher temperatures. The carbidic materials so produced have been found to exhibit good resistance against oxidation at 1000°C.

  4. Crack buckling in soft gels under compression

    Institute of Scientific and Technical Information of China (English)

    Rong Long; Chung-Yuen Hui

    2012-01-01

    Recent interest in designing soft gels with high fracture toughness has called for simple and robust methods to test fracture behavior.The conventional method of applying tension to a gel sample suffers from a difficulty of sample gripping.In this paper,we study a possible fracture mechanism of soft gels under uni-axial compression.We show that the surfaces of a pre-existing crack,oriented parallel to the loading axis,can buckle at a critical compressive stress.This buckling instability can open the crack surfaces and create highly concentrated stress fields near the crack tip,which can lead to crack growth.We show that the onset of crack buckling can be deduced by a dimensional argument combined with an analysis to determine the critical compression needed to induce surface instabilities of an elastic half space.The critical compression for buckling was verified for a neoHookean material model using finite element simulations.

  5. An MRI phantom using carrageenan gel

    Energy Technology Data Exchange (ETDEWEB)

    Kato, Hirokazu; Kuroda, Masahiro; Yoshimura, Koichi; Kawasaki, Shoji; Yamamoto, Naotake; Tanaka, Akio; Hiraki, Yoshio [Okayama Univ. (Japan). School of Medicine; Uchida, Nobue; Sugimura, Kazuro

    2000-12-01

    We have developed a new solid type carrageenan gel phantom. The ingredients of the new gel are carrageenan, manganese chloride, sodium chloride, sodium azide, and water. The gel phantom has sufficient strength to form a torso without the use of a reinforcing agent. A phantom of a desired shape can be created by pouring a hot solution of carrageenan into a mold. The phantom can then be cut easily with a knife and trimmed into the desired shape. The recommended concentrations of the ingredients are; 5 wt% carrageenan, 0.2 mM MnCl{sub 2}, 0.19 wt% NaCl, 0.1 wt% NaN{sub 3}, with the remainder being water. T{sub 2} and T{sub 1} of this phantom at 1.5 T are 84.9 ms and 429 ms respectively. The conductivity and relative dielectric constant at 63.8 MHz are 0.769 S/m and 81.4 respectively. (author)

  6. Gel Electrophoresis of Gold-DNA Nanoconjugates

    Directory of Open Access Journals (Sweden)

    T. Pellegrino

    2007-01-01

    Full Text Available Gold-DNA conjugates were investigated in detail by a comprehensive gel electrophoresis study based on 1200 gels. A controlled number of single-stranded DNA of different length was attached specifically via thiol-Au bonds to phosphine-stabilized colloidal gold nanoparticles. Alternatively, the surface of the gold particles was saturated with single stranded DNA of different length either specifically via thiol-Au bonds or by nonspecific adsorption. From the experimentally determined electrophoretic mobilities, estimates for the effective diameters of the gold-DNA conjugates were derived by applying two different data treatment approaches. The first method is based on making a calibration curve for the relation between effective diameters and mobilities with gold nanoparticles of known diameter. The second method is based on Ferguson analysis which uses gold nanoparticles of known diameter as reference database. Our study shows that effective diameters derived from gel electrophoresis measurements are affected with a high error bar as the determined values strongly depend on the method of evaluation, though relative changes in size upon binding of molecules can be detected with high precision. Furthermore, in this study, the specific attachment of DNA via gold-thiol bonds to Au nanoparticles is compared to nonspecific adsorption of DNA. Also, the maximum number of DNA molecules that can be bound per particle was determined.

  7. STUDY ON ACRYLAMIDE-SODIUM ACRYLATE COPOLYMER GELS

    Institute of Scientific and Technical Information of China (English)

    ZHOU Maotang; LI Qian; XU Jiping

    1990-01-01

    Acrylamide-sodium acrylate copolymer hydrogels have been obtained by radiation techniques.Two different methods have been used to introduce -COONa groups into polymer chains of the gels: (1) by partial hydrolysis of acrylamide homopolymer gel; (2) by direct copolymerization and crosslinking of acrylamide and sodium acrylate in aqueous solutions. It was found that the gels obtained in different ways had different properties, the swelling character of the gels obtained by partial hydrolysis were more sensitive to pH of swelling aqueous media. In order to explain these differences,13 C-NMR techniques were used to investigate the sequence distribution of monomer units of both gels.

  8. Sol-gel layers for ceramic microsystems application

    Science.gov (United States)

    Czok, Mateusz; Golonka, Leszek

    2016-11-01

    This paper describes research on sol-gel solutions preparation process. Utilize of a sol-gel layers in the LTCC technology for reduction of surface roughness and influence on the ceramics properties is examined and described. The influence of sol-gel layer on possible sedimentation of dyes or biological substances in channels, mixers or chambers of ceramic microfluidic structures was investigated. Moreover, properties of sol-gel coated surfaces have been precisely examined and described. Finally, positive results of conducted experiments made it possible to design and manufacture a simple microfluidic ceramic structure, with embedded protective layer of sol-gel, for fluorescence measurements.

  9. Comparative fluorescence two-dimensional gel electrophoresis using a gel strip sandwich assembly for the simultaneous on-gel generation of a reference protein spot grid.

    Science.gov (United States)

    Ackermann, Doreen; Wang, Weiqun; Streipert, Benjamin; Geib, Birgit; Grün, Lothar; König, Simone

    2012-05-01

    The comparison of proteins separated on 2DE is difficult due to gel-to-gel variability. Here, a method named comparative fluorescence gel electrophoresis (CoFGE) is presented, which allows the generation of an artificial protein grid in parallel to the separation of an analytical sample on the same gel. Different fluorescent stains are used to distinguish sample and marker on the gel. The technology combines elements of 1DE and 2DE. Special gel combs with V-shaped wells are placed in a stacking gel above the pI strip. Proteins separated on the pI strip are electrophoresed at the same time as marker proteins (commercially available purified protein of different molecular weight) placed in V-wells. In that way, grids providing approximately 100 nodes as landmarks for the determination of protein spot coordinates are generated. Data analysis is possible with commercial 2DE software capable of warping. The method improves comparability of 2DE protein gels, because they are generated in combination with regular in-gel anchor points formed by protein standards. This was shown here for two comparative experiments with three gels each using Escherichia coli lysate. For a set of 47 well-defined samples spots, the deviation of the coordinates was improved from 7% to less than 1% applying warping using the marker grid. Conclusively, as long as the same protein markers, the same size of pI-strips and the same technology are used, gel matching is reproducibly possible. This is an important advancement for projects involving comparison of 2DE-gels produced over several years and in different laboratories. © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. Ionogel Electrolytes through Sol-Gel Processing

    Science.gov (United States)

    Horowitz, Ariel I.

    Electrical energy needs have intensified due to the ubiquity of personal electronics, the decarbonization of energy services through electrification, and the use of intermittent renewable energy sources. Despite developments in mechanical and thermal methods, electrochemical technologies are the most convenient and effective means of storing electrical energy. These technologies include both electrochemical cells, commonly called batteries, and electrochemical double-layer capacitors, or "supercapacitors", which store energy electrostatically. Both device types require an ion-conducting electrolyte. Current devices use solutions of complex salts in organic solvents, leading to both toxicity and flammability concerns. These drawbacks can be avoided by replacing conventional electrolytes with room-temperature molten salts, known as ionic liquids (ILs). ILs are non-volatile, non-flammable, and offer high conductivity and good electrochemical stability. Device mass can be reduced by combining ILs with a solid scaffold material to form an "ionogel," further improving performance metrics. In this work, sol-gel chemistry is explored as a means of forming ionogel electrolytes. Sol-gel chemistry is a solution-based, industrially-relevant, well-studied technique by which solids such as silica can be formed in situ. Previous works used a simple acid-catalyzed sol-gel reaction to create brittle, glassy ionogels. Here, both the range of products that can be accomplished through sol-gel processing and the understanding of interactions between ILs and the sol-gel reaction network are greatly expanded. This work introduces novel ionogel materials, including soft and compliant silica-supported ionogels and PDMS-supported ionogels. The impacts of the reactive formulation, IL identity, and casting time are detailed. It is demonstrated that variations in formulation can lead to rapid gelation and open pore structures in the silica scaffold or slow gelation and more dense silica

  11. Modelling of the inhomogeneous interior of polymer gels

    Science.gov (United States)

    Shew, Chwen-Yang; Iwaki, Takafumi

    2006-04-01

    A simple model has been investigated to elucidate the mean squared displacement (MSD) of probe molecules in cross-linked polymer gels. In the model, we assume that numerous cavities distribute in the inhomogeneous interior of a gel, and probe molecules are confined within these cavities. The individual probe molecules trapped in a gel are treated as Brownian particles confined to a spherical harmonic potential. The harmonic potential is chosen to model the effective potential experienced by the probe particle in the cavity of a gel. Each field strength is corresponding to the characteristic of one type of effective cavity. Since the statistical distribution of different effective cavity sizes is unknown, several distribution functions are examined. Meanwhile, the calculated averaged MSDs are compared to the experimental data by Nisato et al (2000 Phys. Rev. E 61 2879). We find that the theoretical results of the MSD are sensitive to the shape of the distribution function. For low cross-linked gels, the best fit is obtained when the interior cavities of a gel follow a bimodal distribution. Such a result may be attributed to the presence of at least two distinct classes of cavity in gels. For high cross-linked gels, the cavities in the gel can be depicted by a single-modal uniform distribution function, suggesting that the range of cavity sizes becomes smaller. These results manifest the voids inside a gel, and the shape of distribution functions may provide the insight into the inhomogeneous interior of a gel.

  12. Dynamic viscoelastic properties of collagen gels with high mechanical strength.

    Science.gov (United States)

    Mori, Hideki; Shimizu, Kousuke; Hara, Masayuki

    2013-08-01

    We developed a new method for the preparation of mechanically strong collagen gels by combining successively basic gel formation, followed by 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) cross-linking and lyophilization. Gels cross-linked three times with this method showed stronger mechanical properties (G': 3730±2060 Pa, G″: 288±35 Pa) than a conventional gel that was sequentially cross-linked with EDC once (G': 226±70 Pa, G″: 21±4.4 Pa), but not as strong as the same gel with heating for 30 min at 80°C (G': 7010±830 Pa, G″: 288±35 Pa) reported in our previous paper. The conventional collagen gel was cross-linked with EDC once, heated once, and then subjected twice to a lyophilization-gel formation-cross-linking cycle to give three-cycled gel 2. This gel had the strongest mechanical properties (G': 40,200±18,000 Pa, G″: 3090±1400 Pa, Young's modulus: 0.197±0.069 MPa) of the gels tested. These promising results suggest possible applications of the gels as scaffolds in tissue engineering research.

  13. Responsive Gel-Gel Phase Transitions in Artificially Engineered Protein Hydrogels

    Science.gov (United States)

    Olsen, B. D.

    2012-02-01

    Artificially engineered protein hydrogels provide an attractive platform for biomedical materials due to their similarity to components of the native extracellular matrix. Engineering responsive transitions between shear-thinning and tough gel phases in these materials could potentially enable gels that are both shear-thinning and tough to be produced as novel injectable biomaterials. To engineer a gel with such transitions, a triblock copolymer with thermoresponsive polymer endblocks and an artificially engineered protein gel midblock is designed. Temperature is used to trigger a transition from a single network protein hydrogel phase to a double network phase with both protein and block copolymer networks present at different length scales. The thermodynamics of network formation and resulting structural changes are established using small-angle scattering, birefringence, and dynamic scanning calorimetry. The formation of the second network is shown to produce a large, nonlinear increase in the elastic modulus as well as enhancements in creep compliance and toughness. Although the gels show yielding behavior in both the single and double network regimes, a qualitative change in the deformation mechanism is observed due to the structural changes.

  14. Agarose gel electrophoresis and polyacrylamide gel electrophoresis for visualization of simple sequence repeats.

    Science.gov (United States)

    Anderson, James; Wright, Drew; Meksem, Khalid

    2013-01-01

    In the modern age of genetic research there is a constant search for ways to improve the efficiency of plant selection. The most recent technology that can result in a highly efficient means of selection and still be done at a low cost is through plant selection directed by simple sequence repeats (SSRs or microsatellites). The molecular markers are used to select for certain desirable plant traits without relying on ambiguous phenotypic data. The best way to detect these is the use of gel electrophoresis. Gel electrophoresis is a common technique in laboratory settings which is used to separate deoxyribonucleic acid (DNA) and ribonucleic acid (RNA) by size. Loading DNA and RNA onto gels allows for visualization of the size of fragments through the separation of DNA and RNA fragments. This is achieved through the use of the charge in the particles. As the fragments separate, they form into distinct bands at set sizes. We describe the ability to visualize SSRs on slab gels of agarose and polyacrylamide gel electrophoresis.

  15. Solvent-induced lysozyme gels: rheology, fractal analysis, and sol-gel kinetics.

    Science.gov (United States)

    da Silva, Marcelo A; Arêas, Elizabeth P G

    2005-09-15

    In this work, the gelation kinetics and fractal character of lysozyme gel matrices developed in tetramethylurea (TMU)-water media were investigated. Gelation times were determined from the temporal crossover point between the storage, G', and loss, G'', moduli, as a function of the binary solvent composition and of protein concentration. The inverse dependence of the upper limit of the linear viscoelastic region (gamma0) on protein concentration indicate that the lysozyme gels belong to the "strong link" kind, a gel category where interparticle links are stronger than intraparticle ones. Lysozyme gel fractal dimensions (Df) were determined from the analysis of rheological data according to a scaling theory by Shih et al. [Phys. Rev. A 42 (1990) 4772-4779] and were found to be compatible with a diffusion-limited cluster-aggregation kinetics (DLCA) for lysozyme gels formed at the TMU mass fraction in the binary organic-aqueous solvent, wTMU=0.9, and with a reaction-limited cluster aggregation kinetics (RLCA) for wTMU in the 0.6< or =wTMU< or =0.8 range.

  16. Electrochemical performance of nonflammable polymeric gel electrolyte containing triethylphosphate

    Energy Technology Data Exchange (ETDEWEB)

    Lalia, Boor Singh; Fujita, Takayoshi; Yoshimoto, Nobuko; Egashira, Minato; Morita, Masayuki [Graduate School of Science and Engineering, Yamaguchi University, 2-16-1 Tokiwadai, Ube 755-8611 (Japan)

    2009-01-01

    Nonflammable polymeric gel electrolyte has been prepared by immobilizing 1 M LiBF{sub 4}/EC + DEC + TEP (55:25:20, v/v/v, EC: ethylene carbonate, DEC: diethyl carbonate and TEP: triethylphosphate) solution in poly(vinylidene fluoride-co-hexafluoro propylene) (PVdF-HFP) where TEP acts as a fire-retardant solvent in the gel electrolyte. The polymeric gel electrolyte has a high value of ionic conductivity of 1.76 mS cm{sup -1} at 28 C. Thermal safety calorimetry (TSC) experiments show good thermal stability of the gel electrolyte. Cyclic voltammetry and charge/discharge cycling tests were performed on LiMn{sub 2}O{sub 4}/gel electrolyte and graphite/gel electrolyte half cells. The gel electrolyte works well for graphite/LiMn{sub 2}O{sub 4} cell although some improvement in the cycleability of the graphite electrode is still needed. (author)

  17. Anion-switchable supramolecular gels for controlling pharmaceutical crystal growth

    Science.gov (United States)

    Foster, Jonathan A.; Piepenbrock, Marc-Oliver M.; Lloyd, Gareth O.; Clarke, Nigel; Howard, Judith A. K.; Steed, Jonathan W.

    2010-12-01

    We describe the use of low-molecular-weight supramolecular gels as media for the growth of molecular crystals. Growth of a range of crystals of organic compounds, including pharmaceuticals, was achieved in bis(urea) gels. Low-molecular-weight supramolecular gelators allow access to an unlimited range of solvent systems, in contrast to conventional aqueous gels such as gelatin and agarose. A detailed study of carbamazepine crystal growth in four different bis(urea) gelators, including a metallogelator, is reported. The crystallization of a range of other drug substances, namely sparfloxacin, piroxicam, theophylline, caffeine, ibuprofen, acetaminophen (paracetamol), sulindac and indomethacin, was also achieved in supramolecular gel media without co-crystal formation. In many cases, crystals can be conveniently recovered from the gels by using supramolecular anion-triggered gel dissolution; however, crystals of substances that themselves bind to anions are dissolved by them. Overall, supramolecular gel-phase crystallization offers an extremely versatile new tool in pharmaceutical polymorph screening.

  18. Antioxidant effect of green tea on polymer gel dosimeter

    Science.gov (United States)

    Samuel, E. J. J.; Sathiyaraj, P.; Deena, T.; Kumar, D. S.

    2015-01-01

    Extract from Green Tea (GTE) acts as an antioxidant in acrylamide based polymer gel dosimeter. In this work, PAGAT gel was used for investigation of antioxidant effect of GTE.PAGAT was called PAGTEG (Polyacrylamide green tea extract gel dosimeter) after adding GTE. Free radicals in water cause pre polymerization of polymer gel before irradiation. Polyphenols from GTE are highly effective to absorb the free radicals in water. THPC is used as an antioxidant in polymer gel dosimeter but here we were replaced it by GTE and investigated its effect by spectrophotometer. GTE added PAGAT samples response was lower compared to THPC added sample. To increase the sensitivity of the PAGTEG, sugar was added. This study confirmed that THPC was a good antioxidant for polymer gel dosimeter. However, GTE also can be used as an antioxidant in polymer gel if use less quantity (GTE) and add sugar as sensitivity enhancer.

  19. Stability of capillary gels for automated sequencing of DNA.

    Science.gov (United States)

    Swerdlow, H; Dew-Jager, K E; Brady, K; Grey, R; Dovichi, N J; Gesteland, R

    1992-08-01

    Recent interest in capillary gel electrophoresis has been fueled by the Human Genome Project and other large-scale sequencing projects. Advances in gel polymerization techniques and detector design have enabled sequencing of DNA directly in capillaries. Efforts to exploit this technology have been hampered by problems with the reproducibility and stability of gels. Gel instability manifests itself during electrophoresis as a decrease in the current passing through the capillary under a constant voltage. Upon subsequent microscopic examination, bubbles are often visible at or near the injection (cathodic) end of the capillary gel. Gels have been prepared with the polyacrylamide matrix covalently attached to the silica walls of the capillary. These gels, although more stable, still suffer from problems with bubbles. The use of actual DNA sequencing samples also adversely affects gel stability. We examined the mechanisms underlying these disruptive processes by employing polyacrylamide gel-filled capillaries in which the gel was not attached to the capillary wall. Three sources of gel instability were identified. Bubbles occurring in the absence of sample introduction were attributed to electroosmotic force; replacing the denaturant urea with formamide was shown to reduce the frequency of these bubbles. The slow, steady decline in current through capillary sequencing gels interferes with the ability to detect other gel problems. This phenomenon was shown to be a result of ionic depletion at the gel-liquid interface. The decline was ameliorated by adding denaturant and acrylamide monomers to the buffer reservoirs. Sample-induced problems were shown to be due to the presence of template DNA; elimination of the template allowed sample loading to occur without complications.(ABSTRACT TRUNCATED AT 250 WORDS)

  20. Sol-gel synthesis of hydroxyapatite; Sintese de hidroxiapatita via sol-gel

    Energy Technology Data Exchange (ETDEWEB)

    Zupanski, M.D.; Lucena, M.P.P.; Bergmann, C.P., E-mail: michelledunin@yahoo.com.b [Universidade Federal do Rio Grande do Sul (UFRGS), Porto Alegre, RS (Brazil)

    2010-07-01

    Hydroxyapatite (HAp) has been established as the calcium phosphate based compound with most applications in the biological field. Among the numerous techniques for synthesis of HAp, the sol-gel processing route affords great control over purity and formed phases using low processing temperatures. In addition, the sol-gel approach offers an option for homogeneous HAp coating on metal substrates, as well as the ability to generate nanocrystalline powders. In this work, the sol-gel synthesis of HAp was investigated employing triethyl phosphate and calcium nitrate tetrahydrate as phosphorous and calcium precursors, respectively. The aging effect on phase composition and powder morphology of the final product was studied in terms of temperature and aging time. The powders were studied by using X-ray diffraction, Fourier transform infrared spectroscopy, particle size distribution by laser diffraction and scanning electron microscopy. (author)

  1. Dosimetry in HDR brachytherapy with Fricke-gel layers and Fricke-gel catheters

    Energy Technology Data Exchange (ETDEWEB)

    Gambarini, G; Carrara, M; Negri, A; Invernizzi, M; Tenconi, C; Scotti, A; Pirola, L; Borroni, M; Tomatis, S; Fallai, C, E-mail: grazia.gambarini@mi.infn.i

    2010-11-01

    Fricke-gel layer dosimeters (FGLD) and Fricke gel dosimetric catheters (FGDC) have been designed and tested with the aim of enquiring their suitability for HDR {sup 192}Ir brachytherapy source control and for in-vivo dose verification during treatment. Anisotropy function measurements have been carried out with FGLDs in which a thin plastic tube has been placed in for the {sup 192}Ir source insertion. FGDCs are constituted by plastic tubes (3 mm of external diameter and 13 cm of length) filled with the dosimeter-gel. Absorbed dose images and profiles were attained by means of optical analysis. Dedicated software has been developed both for achieving anisotropy function values and for obtaining reliable results in visible light absorbance measurements across the thin cylindrical dosimeters. Preparation and analysis procedures have been optimised. The results confirm that the proposed methods are very promising for HDR brachytherapy dosimetry.

  2. Investigation of the Peroxovanadate Sol-Gel Process and Characterization of the Gels

    Energy Technology Data Exchange (ETDEWEB)

    Fontenot, Craig Joseph [Iowa State Univ., Ames, IA (United States)

    2001-01-01

    In general, the peroxovanadate solution sol-gel process can be thought of as consisting of two parts: (1) the decomposition of the peroxo species and (2) cation hydrolysis leading to gelation. By controlling the synthesis conditions, both layered and amorphous compounds can be created. However, the type of water coordination observed in these gels was found to be identical no matter what the long-range order. The current work clarified many of the discrepancies found in the literature and offered much new valuable information. Highlights include the types of vanadium environments present at various stages of hydration, the role of adsorbed water, oxygen exchange from adsorbed water into the gel sites, and the ability to create metastable VMoO solid solution phases. These results could have a variety of impacts on future catalysis research.

  3. The biophysical properties of Basal lamina gels depend on the biochemical composition of the gel.

    Science.gov (United States)

    Arends, Fabienna; Nowald, Constantin; Pflieger, Kerstin; Boettcher, Kathrin; Zahler, Stefan; Lieleg, Oliver

    2015-01-01

    The migration of cells within a three-dimensional extracellular matrix (ECM) depends sensitively on the biochemical and biophysical properties of the matrix. An example for a biological ECM is given by reconstituted basal lamina gels purified from the Engelbreth-Holm-Swarm sarcoma of mice. Here, we compare four different commercial variants of this ECM, which have all been purified according to the same protocol. Nevertheless, in those gels, we detect strong differences in the migration behavior of leukocyte cells as well as in the Brownian motion of nanoparticles. We show that these differences correlate with the mechanical properties and the microarchitecture of the gels which in turn arise from small variations in their biochemical composition.

  4. Experimental data of inorganic gel based smart window using silica sol–gel process

    Directory of Open Access Journals (Sweden)

    Dayeon Jung

    2016-12-01

    Full Text Available In this article experimental data are presented for inorganic gel based smart window fabricated using silica sol–gel process. Parallel beam transmittances were measured as functions of voltages for samples fabricated with different concentrations of nitric acid. Spectroscopic transmittance data at different driving voltages for samples fabricated with different LC concentrations are shown. Transmittance spectra of the Si–Ti based gel-based-liquid-crystal (GDLC device measured as different driving voltages were compared with those of PDLC. GDLC showed much lower operating voltages, 10–15 V, for on-state. Formation of the LC droplet in gelation process is illustrated. The methyl organic group surrounds LC droplets. Demonstration of GDLC based smart window showed the successful operation with low driving voltages. GDLC window shows clear color, even at off-state, compared with PDLC.

  5. Synthesis of Hydrophobically Modified Poly(acrylic acid) gels and Interaction of the gels with Cationic/Anionic Surfactants

    Institute of Scientific and Technical Information of China (English)

    田琴; 唐小真; 庄东青; 章云祥

    2002-01-01

    Poly(acrylic acid)(PAA) gel network with only chemical crosslinking and hydorophobically modified PAA(HM-PAA)gels with both chemical and physical crosslinking were synthesized by radical polymerization in tert-butanol,using ethylene glycol dimethacrylate (EGDMA) as crossliker,and 2-(N-ethylperfluorooctanesulfoamido)ethyl methacrylate (FMA),stearyl acrylate (SA) or lauryl acrylate (LA) as Hydrophobic comonomer respectively.The effcet of the fractions and the species of the hydrophobes on swelling properties of HM-PAA gels and the interaction of gels and surfactants were studied.The results showed that the swelling ratio of HM-PAA gels exhibited a sharp decrease with increasing hydrophobic comomomer comcentration,Which Could be sacribed to the formation of strong hydrophobic association among hydrophobic groups.It was proved that two kinds of binding mechanisms of surfactan/gel and different kinds of hydrophobic clusters existed in gels containing both physical and chemical networks.

  6. Synthesis of Hydrophobically Modified Poly(acrylic acid) Gels and Interaction of the Gels with Cationic/Anionic Surfactants

    Institute of Scientific and Technical Information of China (English)

    TIAN,Qin(田琴); TANG,Xiao-Zhen(唐小真); ZHUANG,Dong-Qing(庄东青); ZHANG,Yun-Xiang(章云祥)

    2002-01-01

    Poly( acrylic acid) (PAA) gel network with only chemical crosslinking and hydrophobically modified PAA (HM-PAA)gels with both chemical and physical crosslinking were synthesized by radical polymerization in tert-butanol, using ethylene glycol dimethacrylate (EGDMA) as crosslinker, and 2-(Nethylperfiuorooctanesulfoamido) ethyl methacrylate ( FMA ),stearyl acrylate (SA) or lauryl acrylate (LA) as hydrophobic comonomer respectively. The effect of the fractions and the species of the hydrophobes on swelling properties of HM-PAA gels and the interaction of gels and surfactants were studied.The results showed that the swelling ratio of HM-PAA gels exhibited a sharp decrease with increasing hydrophobic comonomer concentration, which could be ascribed to the formation of strong hydrophobic association among hydrophobic groups. It was proved that two kinds of binding mechanisms of surfactant/gel and different kinds of hydrophobic dusters existed in gels containing both physical and chemical networks.

  7. Analysis of variations in band positions for normalization in across-gel denaturing gradient gel electrophoresis.

    Science.gov (United States)

    Matsushita, Yuko; Yamamura, Kohji; Morimoto, Sho; Bao, Zhihua; Kurose, Daisuke; Sato, Ikuo; Yoshida, Shigenobu; Tsushima, Seiya

    2015-05-01

    Variation in band position between gels is a well-known problem in denaturing gradient gel electrophoresis (DGGE). However, few reports have evaluated the degree of variation in detail. In this study, we investigated the variation in band positions of DNA samples extracted from soil, normalized using reference positions within marker lanes for DGGE in three organismal (bacterial, fungal, and nematode) conditions. For sample lanes, marker DNA (as a control) and sample DNA were used. The test for normality of distribution showed that the position data of a large percentage of bands were normally distributed but not for certain bands. For the normally-distributed data, their variations [standard deviation of marker bands (SDM) and standard deviation of sample bands (SDS), respectively] were assessed. For all organismal conditions, the degree of within-gel variation were similar between SDMs and SDSs, while between-gel variations in SDSs were larger than those in SDMs. Due to the large effect of between-gel variations, the total variations in SDSs were more varied between sample bands, and the mean variations of all sample bands were higher than those in the markers. We found that the total variation in the fungal and nematode SDSs decreased when the intervals between marker bands were narrowed, suggesting that band interval is important for reducing total variation in normalized band positions. For the non-normally distributed data, the distribution was examined in detail. This study provided detailed information on the variation of band positions, which could help to optimize markers for reducing band position variation, and could aid in the accurate identification of bands in across-gel DGGE analyses. Copyright © 2015 Elsevier B.V. All rights reserved.

  8. Continuous alumina gel fibers by sol-gel method using glycolic acid, aluminum nitrate and polyvinylpyrrolidone

    Directory of Open Access Journals (Sweden)

    Hongbin Tan

    2011-09-01

    Full Text Available Continuous alumina fibers were prepared by sol-gel method. The spinning sol was obtained by mixing aluminum nitrate, glycolic acid and polyvinylpyrrolidone with a weight ratio of 10:3:1.5. Fourier transform infrared (FTIR spectra, X-ray diffraction (XRD, and scanning electron microscopy (SEM were used to characterize the properties of the gel and ceramic fibers. The fibers with a uniform diameter and smooth surface were obtained by sintering at 1473K, and its main phase was indentified as a-Al2O3.

  9. Utilizing ATRP to Design Self-Regenerating Polymer Gels

    Science.gov (United States)

    Yong, Xin; Averick, Saadyah; Kuksenok, Olga; Matyjaszewski, Krzysztof; Balazs, Anna

    2014-03-01

    Using newly developed computational approaches, we design a gel system capable of re-growth after a substantial section of the material was cut away. Atom transfer radical polymerization (ATRP) is utilized to form gels with preserved ``living'' chain ends and residual unreacted cross-linking groups. When this ``living'' gel is cut, these active species are exposed to a solution containing monomer, crosslinker, initiator and catalyst. A ``repairing'' polymerization occurs from both the new initiators introduced in the outer solution and the reactive chain ends present at the cut site. This new polymerization results in a covalent linkage between the initial living gel and the new gel prepared in the outer solution, and the connection is promoted by the presence of residual cross-linking groups. By measuring the diffusion of the outer solution into the cut gel and characterizing the width and strength of the interface between the initial and new gels, we identify the optimum parameters that yield a strong interface between the gel layers. Our simulations results are in good agreement with our experimental studies. This strategy not only regenerates ``injured'' gels, but also offers a novel means to engineer multi-layered composite gels.

  10. Friction and wear evaluation of high-strength gel

    Science.gov (United States)

    Kameyama, Toshiki; Wada, Masato; Makino, Masato; Kawakami, Masaru; Furukawa, Hidemitsu

    2016-04-01

    In the last decade, several innovative polymer gel materials with enhanced mechanical proper ties have been invented by Japanese researches. In 2003, a most effective but simple way was proposed to synthesize double network gels, with compression fracture stress of about 30MPa, compared to several tens of kPa for common gels. In this study, we evaluate the wear of a double network gel, both with and without water lubrication. In the un-lubricated experiment, the gel surface is worn with a stainless steel ball. In the other experiment with water lubrication, the gel surface is worn by different counter surfaces because the stainless steel ball was too smooth to wear. It was found that frictional vibration of wear gel is transitioning to steady sliding in lubricated. As conventional reduction method of the friction by the contact between general solids, there are surface processing such as the texturing, attachment of lubrication materials. In the case of gel, the minute processing to the surface such as the texturing is difficult, because the gel is soft in comparison with the hard materials such as the metal. By proceeding with this study, the surface processing of low-frictional gels will be enabled.

  11. Pharmacokinetic Studies of Gel System Containing Ibuprofen Solid Nanoparticles.

    Science.gov (United States)

    Nagai, Noriaki; Tanino, Tadatoshi; Ito, Yoshimasa

    2016-12-01

    In the therapy of rheumatoid arthritis, ibuprofen (IBU) is widely used; however, it has been limited the clinical use by its systemic side effect, such as gastrointestinal lesions. Therefore, we prepared topical gel ointment used IBU solid nanoparticles (IBUnano-gel formulation). In addition, we demonstrated their anti-inflammatory effect by using arthritis model rat (adjuvant-induced arthritis rat, AA rat). The gel formulations were prepared using additives (Carbopol 934, 2-hydroxypropyl-β-cyclodextrin and methylcellulose) and bead mill-method. The IBU particle size in the IBUnano-gel formulation was 208 nm. The increase in inflammation of the hind feet of AA rats was attenuated by the treatment with the IBUnano-gel formulation, and preventive effect was higher than that of a gel formulation containing IBUmicroparticles (IBUmicro-gel formulation, mean particle size 85.4 μm); the accumulation and permeability through the skin of IBU from the IBUnano-gel formulation were significantly larger in comparison with the IBUmicro-gel formulation. Further, no gastrointestinal lesions were observed in AA rats following the repetitive administration of the 5% IBUnano-gel formulation (0.30 g) for 42 days (once a day). These results suggest that the dermal application of IBU-nanoparticles provide effective and efficient therapy that spares patients from unwanted side effects.

  12. Platelet gel for healing cutaneous chronic wounds.

    Science.gov (United States)

    Crovetti, Giovanni; Martinelli, Giovanna; Issi, Marwan; Barone, Marilde; Guizzardi, Marco; Campanati, Barbara; Moroni, Marco; Carabelli, Angelo

    2004-04-01

    Wound healing is a specific host immune response for restoration of tissue integrity. Experimental studies demonstrated an alteration of growth factors activity due to their reduced synthesis, increased degradation and inactivation. In wound healing platelets play an essential role since they are rich of alpha-granules growth factors (platelet derived growth factor--PDGF; transforming growth factor-beta--TGF-beta; vascular endothelial growth factor--VEGF). Topical use of platelet gel (PG), hemocomponent obtained from mix of activated platelets and cryoprecipitate, gives the exogenous and in situ adding of growth factors (GF). The hemocomponents are of autologous or homologous origin. We performed a technique based on: multicomponent apheretic procedure to obtain plasma rich platelet and cryoprecipitate; manual processing in an open system, in sterile environment, for gel activation. Every step of the gel synthesis was checked by a quality control programme. The therapeutic protocol consists of the once-weekly application of PG. Progressive reduction of the wound size, granulation tissue forming, wound bed detersion, regression and absence of infective processes were considered for evaluating clinical response to hemotherapy. 24 patients were enrolled. They had single or multiple cutaneous ulcers with different ethiopathogenesis. Only 3 patients could perform autologous withdrawal; in the others homologous hemocomponent were used, always considering suitability and traceability criteria for transfusional use of blood. Complete response was observed in 9 patients, 2 were subjected to cutaneous graft, 4 stopped treatment, 9 had partial response and are still receiving the treatment. In each case granulation tissue forming increased following to the first PG applications, while complete re-epithelization was obtained later. Pain was reduced in every treated patient. Topical haemotherapy with PG may be considered as an adjuvant treatment of a multidisciplinary process

  13. Sol-gel processing to form doped sol-gel monoliths inside hollow core optical fiber and sol-gel core fiber devices made thereby

    Science.gov (United States)

    Shaw, Harry C. (Inventor); Ott, Melanie N. (Inventor); Manuel, Michele V. (Inventor)

    2002-01-01

    A process of fabricating a fiber device includes providing a hollow core fiber, and forming a sol-gel material inside the hollow core fiber. The hollow core fiber is preferably an optical fiber, and the sol-gel material is doped with a dopant. Devices made in this manner includes a wide variety of sensors.

  14. Sol-gel overganger for microsilica

    OpenAIRE

    2003-01-01

    Oppgaven er en grunnleggende undersøkelse av sol-gel overganger i vandige dispersjoner av Microsilica. Den er delt i tre deler: 1) undersøkelse av Microsilica kolloid- og overflateegenskaper 2) identifisering av parametere som er av størst betydning for gelingsforløpet i Microsilica slurryer og 3) en nærmere undersøkelse av mulige mekanismer for gelingen. Prøven av Microsilica som ble benyttet i forsøkene var en relativt ren kvalitet med et SiO2 -innhold på 97,3 vekt%. P...

  15. Soluble polymers in sol-gel silica

    Science.gov (United States)

    Beaudry, Christopher Laurent

    In the last few years, the inherent versatility of sol-gel processing has led to a significant research effort on inorganic/organic materials. One method of incorporating an organic phase into sol-gel silica is dissolving an organic polymer in a tetraethylorthosilicate (TEOS) solution, followed by in situ polymerization of silica in the presence of organic polymer. The first part of the study involved the development of a two-step (acid-base) synthesis procedure to allow systematic control of acidity in TEOS solutions. With this procedure, it was possible to increase the pH of the TEOS solution while correlating the acidity and properties. The properties were the gelation time, syneresis rate, drying behavior, and xerogel pore structure, as determined by nitrogen sorption. Furthermore, controlling the acidity was shown to control the silica xerogel pore structure. In the second part of the study, the two-step procedure was used to synthesize silica/poly(ethylene glycol) (PEG), and silica/poly(vinyl acetate) (PVAc) composite materials. The content of organic polymer and the molecular weight were varied. The gelation time, the syneresis rate, the drying behavior, and the pore structure were determined for compositions with 10% PEG (M.W. 2,000), 5, 10, and 15% PEG (M.W. 3,400), and 10 and 25% PVAc (M.W. 83,000). Other compositions and molecular weights of PEG lead to sedimentation. In the PEG compositions, the tendency to phase separate was correlated with the effects of the processing variables on the segregation strength and polymerization rate. The PVAc compositions did not show any visible phase separation during processing, giving the composite xerogels an appearance similar to pure silica. The property differences between gels with PEG and gels with PVAc show the relative strength of the interactions with silica. Both polymers exhibit hydrogen bonding between the phases. In the case of PEG, hydrogen bonding between the ether oxygens of the polymer and silanol

  16. Hybrid slab-microchannel gel electrophoresis system

    Science.gov (United States)

    Balch, Joseph W.; Carrano, Anthony V.; Davidson, James C.; Koo, Jackson C.

    1998-01-01

    A hybrid slab-microchannel gel electrophoresis system. The hybrid system permits the fabrication of isolated microchannels for biomolecule separations without imposing the constraint of a totally sealed system. The hybrid system is reusable and ultimately much simpler and less costly to manufacture than a closed channel plate system. The hybrid system incorporates a microslab portion of the separation medium above the microchannels, thus at least substantially reducing the possibility of non-uniform field distribution and breakdown due to uncontrollable leakage. A microslab of the sieving matrix is built into the system by using plastic spacer materials and is used to uniformly couple the top plate with the bottom microchannel plate.

  17. Sol-gel processing of ceramics

    OpenAIRE

    Schmidt, Helmut K.

    1991-01-01

    The sol-gel process can be considered as an interesting method for the synthesis of tailor-made ceramic raw materials. Two points of view are of special interest: powder synthesis and the processing of ultrafine raw materials. In the case of powder synthesis, high quality and multicomponent powders can be synthesized by control of surface chemistry and agglomerate-free subµm powder can be obtained. The preparation of tailor-made sols offers the possibility of powder-free processing of coating...

  18. Electrochemical Study of Conductive Gel Polymer

    Institute of Scientific and Technical Information of China (English)

    Zhaohui Li; Jing Jiang; Gangtie Lei

    2005-01-01

    @@ 1Introduction Conventional ion-conducting polymer consists of electrolyte salt and polymer matrix, so-called salt-inpolymer. It possesses lower conductivity because the migration of ions depends on the motion of polymer segmental. To increase the ionic conductivity, a kind of gel polymer film (GPF) was prepared by in situ polymerization of methyl methacrylate (MMA) monomer in room-temperature ionic liquid(RTIL), 1-butyl-3-methylimidazolium hexafluorophosphate (BMIPF6). Due to immeasurably low vapor pressure, high ionic conductivity, and greater thermal and electrochemical stability, BMIPF6 is suitable electrolyte salts for ion-conducting polymer.

  19. GEL PERMEATION CHROMATOGRAPHIC ANALYSIS OF LACQUER POLYSACCHARIDE

    Institute of Scientific and Technical Information of China (English)

    QIU Xingping; ZHANG Lina; DU Yumin; QIAN Baogong; LU Zaimin

    1992-01-01

    Ten fractionated samples of Chinese lacquer polysaccharide in aqueous 0.1M NaCl solution were studied by aqueous-phase gel permeation chromatography (GPC). The universal calibration, broad MWD calibration and corrected column dispersion were adopted to the analysis of GPC chromatograms of the polysaccharide. The molecular weights Mw, Mn and polydispersity index Mw/Mn obtained from GPC are in good agreement with the results of light scattering and membrane osmometry. It is verified that the universal calibration concept is applicable to the lacquer polysaccharide having a number of side chains.

  20. Stimuli responsive polymer gels for sensing applications

    OpenAIRE

    Kavanagh, Andrew

    2012-01-01

    This chapter (3) is based on simplifying the design template of an optical sensor through the multifunctionality imparted on it by an IL. The IL simplified polymer gel is termed an optode within this chapter as (a) it is prepared the same manner as optodes, (b) the IL performs many of the same functions as previous materials used in optode design and (c) the analyte or ion movement between the aqueous and organic phases follows the same convention for optodes. The 2-component optode membr...

  1. Role and properties of the gel formed during nuclear glass alteration: importance of gel formation conditions

    Science.gov (United States)

    Gin, S.; Ribet, I.; Couillard, M.

    2001-09-01

    A French SON 68 nuclear glass sample was experimentally altered to assess the mechanisms limiting the glass alteration kinetics, especially during the transition phase between the initial rate r0 and the final rate under silicon saturation conditions. A glass specimen was altered at the initial rate for one week to form a silicon-depleted non-protective gel; the specimen was then leached under static conditions at a glass-surface-to-solution-volume ( S/ V) ratio of 500 m-1 and the alteration kinetics were compared with those of a pristine glass specimen altered under the same conditions. Unexpectedly, after static leaching the previously leached glass was 2.7 times as altered as the pristine specimen, and the steady-state silicon concentration was twice as high for the previously leached specimen. STEM characterization of the alteration films showed that the initial non-protective gel constituted a silicon pump with respect to the glass, and that the glass alteration kinetics were limited only when a fraction of the gel became saturated with silicon, and exhibited protective properties. This work also shows that silicon recondensation was uniform at micrometer scale: the silicon hydrolyzed at the reaction interface then diffused before recondensing over a length comparable to the gel thickness. In addition to these findings, this investigation suggests a reinterpretation of the effect of the S/ V ratio on the glass alteration kinetics and on the steady-state dissolved silicon concentration.

  2. Prediction of Gel Modulus using the Gel-Tensile Blob (GTB) Model for Network Structure

    Science.gov (United States)

    Beaucage, Gregory; Sukumaran, Sathish K.

    2010-03-01

    Network structure in gels, as determined by small-angle scattering, bears little resemblance to the structure expected from the Flory-Rehner, c* or other models for gel properties. Scattering shows a universal excess in scattering intensity at moderate-q that displays a size larger than that of a chain between network crosslinks. Further, a substructural size, often associated with the chain-coil of the network mesh, deviates from linear chain scattering. In this presentation, recent developments in the understanding of branch topology (Beaucage 2004, Ramachandran 2008,2009) are applied to networks in order to predict mechanical properties, particularly the modulus of swollen networks. The approach is based on quantification of the minimum dimension and connectivity dimension for gels and coupling of these descriptions with the gel-tensile blob (GTB) model previously described by Sukumaran (2001,2005). Beaucage G, Phys. Rev. E 70 031401 (2004).; Ramachandran R, et al. Macromolecules 41 9802-9806 (2008).; Ramachandran R, et al. Macromolecules, 42 4746-4750 (2009).; Sukumaran SK & Beaucage G Europhys. Lett. 59 714-720 (2002).; Sukumaran SK & Beaucage G, et al. Eur. Phys. J. E 18 29-36 (2005).

  3. FORMULATION AND EVALUATION OF POLYHERBAL GEL FOR ANTI - INFLAMMATORY ACTIVITY

    Directory of Open Access Journals (Sweden)

    Gouri Dixit*, Ganesh Misal, Vijay Gulkari and Kanchan Upadhye

    2013-03-01

    Full Text Available ABSTRACT: In the present study, three medicinal plants Cynodon dactylon (L. Pers, Cassia tora Linn. and Cassia alata Linn having significant anti-inflammatory potential were selected to be formulated as polyherbal gels. The gels were prepared using the dried methanolic extract of Cassia tora Linn, Cassia alata Linn and Cynodon dactylon (L. Pers. Polyherbal gel formulations were evaluated for its pH, appearance and homogeneity, viscosity, spreadability and skin irritation studies. Assessment of Anti-inflammatory activity was done by carrageenan induced rat paw edema and formalin- induced rat paw edema. Individual and polyherbal gel of Cassia alata Linn,Cassia tora Linn. and Cynodon dactylon (L. Pers were found to possess anti-inflammatory effect in acute and chronic models. Polyherbal gel also showed synergistic effect as compared to individual gels which can be useful for the treatment of local inflammation.

  4. Different Applications of Rheological Techniques in Studies of Physical Gels

    DEFF Research Database (Denmark)

    Hvidt, Søren

    . Rheological techniques are used extensively in studies of physical gels and gelation. In the lecture some of the common techniques used in studies of gels will be addressed. Small amplitude oscillatory measurements are the most common type of measurement performed, and such measurements allow a determination......Physical gels are of both great scientific and practical interest. The cytoplasm of cells, which consists of a complex physical gel of protein filaments, is important for most of the cellular processes including cell division and cell motility. Nature has developed this complex system......-forming biopolymers. Physical gels are also used in the paint industry to minimize sedimentation. Delayed and controlled drug release is of importance in the pharmaceutical industry, and one way to obtain this control is to hide active components in physical gels. Two excellent reviews cover many aspects...

  5. Release characteristics of dibucaine dispersed in konjac gels.

    Science.gov (United States)

    Nakano, M; Takikawa, K; Arita, T

    1979-09-01

    A possible use of konjac gel for sustained release of drugs was examined in a monolithic system containing dibucaine. Dibucaine was dispersed in the gel which was prepared by gelation of the konjac flour in a borax solution at 60 degrees. The cumulative amount of the drug released plotted against the square root of time was linear in the monolithic system. This relationship was in agreement with that expected from the theoretical equation for planar configuration. The mechanism of the release of the drug from the gel may be considered to be leaching of the drug by the permeating fluid. The release profile from dried konjac gel was similar to that from undried gel, but that from unwarmed gel showed a deviation from linearity although sustained release was similarly obtained.

  6. Different Applications of Rheological Techniques in Studies of Physical Gels

    DEFF Research Database (Denmark)

    Hvidt, Søren

    -forming biopolymers. Physical gels are also used in the paint industry to minimize sedimentation. Delayed and controlled drug release is of importance in the pharmaceutical industry, and one way to obtain this control is to hide active components in physical gels. Two excellent reviews cover many aspects...... of the elastic storage modulus, G’, and loss modulus, G”, as a function of e.g. frequency, temperature, or time. Two other techniques, which can be very useful for studies of gels, are creep and relaxation measurements. These techniques, which allow determinations of the compliance and the relaxation modulus...... importance in many applications. When a gel is deformed with increasing strain or strain amplitudes most gels eventually rupture. The yield stress denotes the maximum stress gels can withstand. Different ways of determining yield stress will be illustrated. Oscillatory measurements only allow determinations...

  7. Explorative data analysis of two-dimensional electrophoresis gels

    DEFF Research Database (Denmark)

    Schultz, J.; Gottlieb, D.M.; Petersen, Marianne Kjerstine

    2004-01-01

    Methods for classification of two-dimensional (2-DE) electrophoresis gels based on multivariate data analysis are demonstrated. Two-dimensional gels of ten wheat varieties are analyzed and it is demonstrated how to classify the wheat varieties in two qualities and a method for initial screening...... of gels is presented. First, an approach is demonstrated in which no prior knowledge of the separated proteins is used. Alignment of the gels followed by a simple transformation of data makes it possible to analyze the gels in an automated explorative manner by principal component analysis, to determine...... if the gels should be further analyzed. A more detailed approach is done by analyzing spot volume lists by principal components analysis and partial least square regression. The use of spot volume data offers a mean to investigate the spot pattern and link the classified protein patterns to distinct spots...

  8. Sol-gel precursors and products thereof

    Science.gov (United States)

    Warren, Scott C.; DiSalvo, Jr., Francis J.; Weisner, Ulrich B.

    2017-02-14

    The present invention provides a generalizable single-source sol-gel precursor capable of introducing a wide range of functionalities to metal oxides such as silica. The sol-gel precursor facilitates a one-molecule, one-step approach to the synthesis of metal-silica hybrids with combinations of biological, catalytic, magnetic, and optical functionalities. The single-source precursor also provides a flexible route for simultaneously incorporating functional species of many different types. The ligands employed for functionalizing the metal oxides are derived from a library of amino acids, hydroxy acids, or peptides and a silicon alkoxide, allowing many biological functionalities to be built into silica hybrids. The ligands can coordinate with a wide range of metals via a carboxylic acid, thereby allowing direct incorporation of inorganic functionalities from across the periodic table. Using the single-source precursor a wide range of functionalized nanostructures such as monolith structures, mesostructures, multiple metal gradient mesostructures and Stober-type nanoparticles can be synthesized. ##STR00001##

  9. Use of papain gel in disabled patients.

    Science.gov (United States)

    Carrillo, C M; Tanaka, M H; Cesar, M F; Camargo, M A F; Juliano, Y; Novo, N F

    2008-01-01

    This study's purpose was to evaluate complete caries removal time (CCR) and patient acceptance of the chemomechanical caries removal agent and papain gel Papacárie in disabled patients. Fifty-one consecutive patients entered a prospective, controlled, randomized, open study. Patients were divided into 2 groups: (1) group 1=28 children 3 to 10 years old with or without visual or hearing impairments, motor disability on upper limbs, and inability to respond to simple orders; and (2) group 2=23 children, without visual or hearing impairments, with motor disability on the upper limbs and the ability to respond to simple orders. CCR time was measured in both groups. Patients' acceptance was assessed only in group 2 by using the visual analogy of face scale. The visual scale was presented in phase A--after the radiography with the child sitting on the dental chair before the beginning of the treatment, phase B--during the treatment, after total removal of the carious tissue and phase C--after the restoration was complete (treatment was finished). The total CCR average time was 8 minutes for each tooth when groups 1 and 2 were considered. Group 2 patients' acceptance in the first treatment was not statistically significant in all stages. Papacárie gel had a completed caries removal time of 8 minutes per tooth and is well accepted by the patients in all phases and in the first and subsequent visits.

  10. Sol-gel precursors and products thereof

    Energy Technology Data Exchange (ETDEWEB)

    Warren, Scott C.; DiSalvo, Jr., Francis J.; Weisner, Ulrich B.

    2017-02-14

    The present invention provides a generalizable single-source sol-gel precursor capable of introducing a wide range of functionalities to metal oxides such as silica. The sol-gel precursor facilitates a one-molecule, one-step approach to the synthesis of metal-silica hybrids with combinations of biological, catalytic, magnetic, and optical functionalities. The single-source precursor also provides a flexible route for simultaneously incorporating functional species of many different types. The ligands employed for functionalizing the metal oxides are derived from a library of amino acids, hydroxy acids, or peptides and a silicon alkoxide, allowing many biological functionalities to be built into silica hybrids. The ligands can coordinate with a wide range of metals via a carboxylic acid, thereby allowing direct incorporation of inorganic functionalities from across the periodic table. Using the single-source precursor a wide range of functionalized nanostructures such as monolith structures, mesostructures, multiple metal gradient mesostructures and Stober-type nanoparticles can be synthesized. ##STR00001##

  11. Il Gel Piastrinico in chirurgia orale

    Directory of Open Access Journals (Sweden)

    Sacchi M.C.

    2012-01-01

    Full Text Available Obiettivi: L’utilizzo topico di emocomponenti autologhi, il concentrato piastrinico (CP ed il plasma povero di piastrine, rappresenta una delle strategie più innovative per modulare ed amplificare i processi di guarigione e di rigenerazione tessutale. Con questo studio si è dimostrato che l’applicazione del gel piastrinico, quando viene applicato in chirurgia orale ed in particolare nell’implantologia, è in grado di migliorare ed accelerare i processi osteogenetici;Metodologia: il CP, preparato a partire da un prelievo contenuto di sangue venoso (30-60 ml, viene attivato mediante una miscela di calcio gluconato e batroxobina (un enzima similtrombinico. Nell’arco di 3-5 minuti si ottiene un bioprodotto pronto per rilasciare in situ, verosimilmente, quei GFs fondamentali per la guarigione e la rigenerazione dei tessuti circostanti.;Conclusioni: il gel piastrinico, una biotecnologia efficace, semplice e dai costi contenuti, offre ai clinici l’opportunità di poter disporre di uno strumento innovativo atto a ridurre i tempi di guarigione e le complicanze post-operative, migliorando notevolmente la qualità di vita dei pazienti;

  12. Supramolecular gel electrophoresis of large DNA fragments.

    Science.gov (United States)

    Tazawa, Shohei; Kobayashi, Kazuhiro; Oyoshi, Takanori; Yamanaka, Masamichi

    2017-07-06

    Pulsed-field gel electrophoresis is a frequent technique used to separate exceptionally large DNA fragments. In a typical continuous field electrophoresis, it is challenging to separate DNA fragments larger than 20 kbp because they migrate at a comparable rate. To overcome this challenge, it is necessary to develop a novel matrix for the electrophoresis. Here, we describe the electrophoresis of large DNA fragments up to 166 kbp using a supramolecular gel matrix and a typical continuous field electrophoresis system. C3 -symmetric tris-urea self-assembled into a supramolecular hydrogel in tris-boric acid-EDTA buffer, a typical buffer for DNA electrophoresis, and the supramolecular hydrogel was used as a matrix for electrophoresis to separate large DNA fragments. Three types of DNA marker, the λ-Hind III digest (2 to 23 kbp), Lambda DNA-Mono Cut Mix (10 to 49 kbp), and Marker 7 GT (10 to 165 kbp), were analyzed in this study. Large DNA fragments of greater than 100 kbp showed distinct mobility using a typical continuous field electrophoresis system. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  13. Semiconductor gel in shark sense organs?

    Science.gov (United States)

    Fields, R Douglas; Fields, Kyle D; Fields, Melanie C

    2007-10-22

    Sharks can sense bioelectric fields of prey and other animals in seawater using an extraordinary system of sense organs (ampullae of Lorenzini) [R.D. Fields, The shark's electric sense. Sci. Am. 297 (2007) 74-81]. A recent study reported that these sense organs also enable sharks to locate prey-rich thermal fronts using a novel mode of temperature reception without ion channels. The study reported that gel extracted from the organs operates as a thermoelectric semiconductor, generating electricity when it is heated or cooled [B.R. Brown, Neurophysiology: sensing temperature without ion channels, Nature 421 (2003) 495]. Here we report biophysical studies that call into question this mechanism of sensory transduction. Our experiments indicate that the material exhibits no unusual thermoelectric or electromechanical properties, and that the thermoelectric response is an artifact caused by temperature effects on the measurement electrodes. No response is seen when non-metallic electrodes (carbon or salt bridges) are used, and ordinary seawater produces the same effect as shark organ gel when silver wire electrodes are used. These data are consistent with the voltages arising from electrochemical electrode potentials rather generated intrinsically within the sample. This new evidence, together with the anatomy of the organs and behavioral studies in the literature, best support the conclusion that the biological function of these sense organs is to detect electric fields.

  14. Microfluidic dielectrophoretic sorter using gel vertical electrodes

    Science.gov (United States)

    Luo, Jason; Nelson, Edward L.; Li, G. P.; Bachman, Mark

    2014-01-01

    We report the development and results of a two-step method for sorting cells and small particles in a microfluidic device. This approach uses a single microfluidic channel that has (1) a microfabricated sieve which efficiently focuses particles into a thin stream, followed by (2) a dielectrophoresis (DEP) section consisting of electrodes along the channel walls for efficient continuous sorting based on dielectric properties of the particles. For our demonstration, the device was constructed of polydimethylsiloxane, bonded to a glass surface, and conductive agarose gel electrodes. Gold traces were used to make electrical connections to the conductive gel. The device had several novel features that aided performance of the sorting. These included a sieving structure that performed continuous displacement of particles into a single stream within the microfluidic channel (improving the performance of downstream DEP, and avoiding the need for additional focusing flow inlets), and DEP electrodes that were the full height of the microfluidic walls (“vertical electrodes”), allowing for improved formation and control of electric field gradients in the microfluidic device. The device was used to sort polymer particles and HeLa cells, demonstrating that this unique combination provides improved capability for continuous DEP sorting of particles in a microfluidic device. PMID:24926390

  15. Investigation of ultrasonic properties of MAGIC gels for pulse-echo gel dosimetry

    Energy Technology Data Exchange (ETDEWEB)

    Atkins, T J; Humphrey, V F; Duck, F A; Tooley, M A, E-mail: timothy.atkins@nhs.ne

    2010-11-01

    Ultrasound has been proposed as an alternative 3D method to read out dosimetric gels. The ultrasonic properties of MAGIC gel are investigated in relation to producing a dosimetry system based on a pulse-echo technique. The sound speed, attenuation coefficient, and density of MAGIC gel were measured over a range of temperatures and doses. A nonlinear relationship between ultrasonic attenuation and dose was observed, with the attenuation below 10 Gy being approximately constant. The sound speed was 1550.3 {+-} 1.5 m s{sup -1} at 25 {sup 0}C with a dose sensitivity of 0.14 {+-} 0.03 m s{sup -1} Gy{sup -1}; both properties changed with temperature and were 1535.4 {+-} 0.8 m s{sup -1} and -0.08 {+-} 0.01 m s{sup -1} Gy{sup -1} respectively at 15 {sup 0}C. The density also varied with temperature and dose, and was 1028.9 {+-} 0.3 kg m{sup -3} with a dose sensitivity of 0.178 {+-} 0.004 kg m{sup -3} Gy{sup -1} at 26 {sup 0}C. The characteristic acoustic impedance of MAGIC gel was calculated to be 1.596 x 10{sup 6} kg m{sup 2} s{sup -1} at 0 Gy and 25 {sup 0}C. The dose sensitivities measured indicate that changes to the characteristic acoustic impedance caused by irradiation are small, and therefore a reflector that has a similar characteristic acoustic impedance is required to maximise sensitivity of the pulse-echo technique. A suitable material has been developed and the reflection characteristics of the interface between MAGIC gel and the reflector are also temperature dependent. It is concluded that temperature management will be central to the development of any practical pulse-echo dosimetry system.

  16. Buckling transition of nematic gels in confined geometry

    OpenAIRE

    Meng, Guangnan; Meyer, Robert B.

    2009-01-01

    A spontaneous buckling transition in thin layers of monodomain nematic liquid crystalline gel was observed by polarized light microscopy. The coupling between the orientational ordering of liquid crystalline solvent and the translational ordering of crosslinked polymer backbones inside the nematic gel contributes to such buckling transition. As the nematic mesogens become more ordered when the gel is cooled down from a higher gelation temperature, the polymeric backbones tend to elongate alon...

  17. Collective Movement of Epithelial Cells on a Collagen Gel Substrate

    OpenAIRE

    Haga, Hisashi; Irahara, Chikako; KOBAYASHI, Ryo; Nakagaki, Toshiyuki; Kawabata, Kazushige

    2004-01-01

    Collective cell movement acts as an efficient strategy in many physiological events, including wound healing, embryonic development, and morphogenesis. We found that epithelial cells (Madin-Darby canine kidney cell) migrated collectively along one direction on a collagen gel substrate. Time-lapse images of Madin-Darby canine kidney cells cultured on type-I collagen gels and glass substrates were captured by phase contrast microscopy equipped with an incubation system. On the gel substrate, th...

  18. A zwitterionic gel electrolyte for efficient solid-state supercapacitors

    OpenAIRE

    Peng, Xu; Liu, Huili; Yin, Qin; Wu, Junchi; Chen, Pengzuo; Zhang, Guangzhao; Liu, Guangming; Wu, Changzheng; Xie, Yi

    2016-01-01

    Gel electrolytes have attracted increasing attention for solid-state supercapacitors. An ideal gel electrolyte usually requires a combination of advantages of high ion migration rate, reasonable mechanical strength and robust water retention ability at the solid state for ensuring excellent work durability. Here we report a zwitterionic gel electrolyte that successfully brings the synergic advantages of robust water retention ability and ion migration channels, manifesting in superior electro...

  19. Burns and injuries resulting from the use of gel candles.

    Science.gov (United States)

    Pickus, E J; Lionelli, G T; Parmele, J B; Lawrence, W T; Korentager, R A

    2001-01-01

    Scented gel candles are common decorative household items composed of gelled mineral oil, fragrances, and dye. Like traditional wax candles, they have an open flame. Because of defective design, there have been several burns and injuries caused by these products. Here we report our experience with a scald burn from a gel candle and describe 34 additional injuries attributed to gel candles previously unreported in the medical literature.

  20. Stimuli responsive smart-gels realized via modular protein design

    OpenAIRE

    2010-01-01

    Smart-gels have a variety of applications including tissue engineering and controlled drug delivery. Here we present a modular, bottom-up approach that permits the creation of protein-based smart-gels with encoded morphology, functionality, and responsiveness to external stimuli. The properties of these gels are encoded by the proteins from which they are synthesized. In particular, the strength and density of the network of intermolecular cross-links are specified by the interactions of the ...

  1. Effect of heat on the adsorption properties of silica gel

    OpenAIRE

    Christy, Alfred A.

    2012-01-01

    Adsorption properties of silica gel have been attributed to the surface hydroxyl groups of silica gel. Some hydroxyl groups are free standing and called free silanol groups. Some are hydrogen bonded to neighbouring silanol groups. Christy has shown that a high silanol number and a balanced concentration proportionality between these two different types of hydroxyl groups is necessary for effective adsorption of water molecules. Thermal treatment of silica gel samples alters the proportions...

  2. Progress on sol-gel sphere-pac development

    Energy Technology Data Exchange (ETDEWEB)

    Suchomel, R R

    1978-01-01

    The ORNL sol-gel program is reviewed briefly. Advantages of the sol-gel sphere-pac are listed. Three sizes of microspheres are being used; the two largest sized fractions are blended and then loaded into the fuel rod, followed by packing of the smallest microspheres into void spaces using a low-energy vibrator. Sol-gel sphere-pac also appears attractive for breeder reactor fuel fabrication. (DLC)

  3. Network confinement and heterogeneity slows nanoparticle diffusion in polymer gels

    Science.gov (United States)

    Parrish, Emmabeth; Caporizzo, Matthew A.; Composto, Russell J.

    2017-05-01

    Nanoparticle (NP) diffusion was measured in polyacrylamide gels (PAGs) with a mesh size comparable to the NP size, 21 nm. The confinement ratio (CR), NP diameter/mesh size, increased from 0.4 to 3.8 by increasing crosslinker density and from 0.4 to 2.1 by adding acetone, which collapsed the PAGs. In all gels, NPs either became localized, moving less than 200 nm, diffused microns, or exhibited a combination of these behaviors, as measured by single particle tracking. Mean squared displacements (MSDs) of mobile NPs decreased as CR increased. In collapsed gels, the localized NP population increased and MSD of mobile NPs decreased compared to crosslinked PAGs. For all CRs, van Hove distributions exhibited non-Gaussian displacements, consistent with intermittent localization of NPs. The non-Gaussian parameter increased from a maximum of 1.5 for crosslinked PAG to 5 for collapsed PAG, consistent with greater network heterogeneity in these gels. Diffusion coefficients decreased exponentially as CR increased for crosslinked gels; however, in collapsed gels, the diffusion coefficients decreased more strongly, which was attributed to network heterogeneity. Collapsing the gel resulted in an increasingly tortuous pathway for NPs, slowing diffusion at a given CR. Understanding how gel structure affects NP mobility will allow the design and enhanced performance of gels that separate and release molecules in membranes and drug delivery platforms.

  4. A HYBRID POLYMER GEL AND ITS STATIC NONERGODICIT

    Institute of Scientific and Technical Information of China (English)

    Yue Zhao; Chi Wu

    2002-01-01

    We used a thermally reversible hybrid gel made of billions of physically jam-packed swollen thermally sensitive poly(N-isopropyl-acrylamide) chemical microgels. Laser light scattering study on a series of such hybrid gels formed at different gelling rates and temperatures revealed that the position-dependence of the scattering speckle pattern (static nonergodicity) came from large voids formed during the sol-gel transition. With a proper preparation, such a nonergodicity could be completely removed, indicating that the static nonergodicity generally observed in a gel is not intrinsic, but comes from the clustering "island" structure formed during the gelation process.

  5. Nonlinear dynamics of self-oscillating polymer gels

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    Self-oscillating polymer gels driven by Belousov-Zhabotinsky (BZ) chemical reaction are a new class of functional gels that have a wide range of potential applications (e.g., autonomously functioning membranes, actuate artificial muscles). However, the precise control of these gels has been an issue due to limited investigations of the influences of key system parameters on the characteristics of BZ gels. To address this deficiency, we studied the self-oscillating behavior of BZ gels using the nonline-ar dynamics theory and an Oregonator-like model, with focus placed upon the influences of various system parameters. The analysis of the oscillation phase indicated that the dynamic response of BZ gels represents the classical limit cycle oscillation. We then investigated the characteristics of the limit cycle oscillation and quantified the influences of key parameters (i.e., ini-tial reactant concentration, oxidation and reduction rate of catalyst, and response coefficient) on the self-oscillating behavior of BZ gels. The results demonstrated that sustained limit cycle oscillation of BZ gels can be achieved only when these key pa-rameters meet certain requirements, and that the pattern, period and amplitude of the oscillation are significantly influenced by these parameters. The results obtained in this study could enable the controlled self-oscillation of BZ gels system. This has several potential applications such as controlled drug delivery, miniature peristaltic pumps and microactuators.

  6. Optimized Benzalkonium Chloride Gel: A Potential Vaginal Microbicides

    Institute of Scientific and Technical Information of China (English)

    Xun-cheng DING; Wei-hua LI; Jie-fei LI; Qiang-yi WANG

    2007-01-01

    Objective To develop an optimized BZK gel with good pharmaceutical effect and less toxicity to vaginal mucosa.Methods Four methods as below were used to research the spermicidal activity of BZK gel: 1)in vitro spermicidal test; 2) in vivo spermicidal test in rabbits; 3) anti-fertility test in rabbits; 4)contraceptive test in rabbits. Mucosal irritation test was used in rats to evaluate the safety of optimized BZK gel. Microbiological assessments were used to research anti-STI pathogens (including treponema pallidum, neisseria gonorrhoeae, trichomona vaginalis, candida albicans,ureaplama urealyticum, herpes simplex virus type-2, chlamydiae trachomatis) effect of optimized BZK gel.Results In vitro spermicidal test, EC50 of BZK gel was 0.029 mg/ml, a little higher than that of N-9 (0.019 mg/ml). The MIC of BZK gel was 0.25 mg/ml, similar to that of N-9 (0.20 mg/ml).The vaginal mucosal irritation test in rats showed that 0.429% BZK gel showed only minimal vaginal irritation, and did not damage the vaginal epithelium or cause local inflammation in rats. Microbiological assessments showed that optimized BZK gel could inhibit or inactivate common STI pathogens even after 3-fold or 5-fold dilution.Conclusion Optimized BZK gel was an effective microbicides.

  7. Creation of Functional Organic Gels Based on Oligothiophenes

    Institute of Scientific and Technical Information of China (English)

    Liu Ping; Zhao Qi-zhong; Hu Jian-hua; Zhou Xiao-ping; Deng Wen-ji; Xu Yun-hua

    2004-01-01

    Polymer gels have received a great deal of attention not only from scientific interest but also for their practical applications. Recently, low molecular-weight organic gels have also been receiving growing attention. However, their have been few studies of low molecular-weight organic gels in contrast to extensive studies of polymer gels.In order to develop a novel class of low-molecular-weight organic gels and to gain an insight into the relationship between molecular structures of gel-forming compounds and gel-forming properties, a novel family of low molecular-weight organic compounds containing oligothiophene,N,N'-distearyl-5,5"-(2,2':5',2"-terthiophe-ne)dicarboxamide(DNC183T),N,N'-dialkyl-5,5"-(3,3"-dioctyl-2,2':5',2"-terthiophene)dicarboxamide(DNCnDOc3T, n = 5, 8, 16, 18)and N,N'-distearyl-5,5'"-( 3,3'"-dioctyl- 2,2':5',2 ":5",2'"-quaterthiophene)dicarboxamide(DNC1sDOc4T), were designed and synthesized. Whereas DNC183T did not form gels with organic solvents, DNCnDOc3T(n = 8, 16, 18) and DNC18DOc4T were found to form gels with certain organic solvents. These are the first examples of low molecular-weight organic gels containing an oligothiophene moiety. It is of intest to note that while DNC8DOc3T forms opaque gels with alcohols,e.g. ethanol and isopropanol, DNC16DOc3T, DNC18DOc3T and DNC18DOc4Tform transparent gels with hydrocarbon solvents such as heptane, octane, undecane, and others. It is shown that the intermolecular hydrogen bonding and intermolecular interactions between the long alkyl chain in the N-alkylcarboxamide group as well as the incorporation of an alkyl group at the β-position of the thiophene ring play an important role for the formation of gels. The optical micrographs of gels and the SEM images of xerogels showed three-dimensional networks of fibrous bundle structures.DNC18DOc4T gels was found to exhibit a reversible clear color change on electrochemical oxidation and reduction. Thus, low molecular-weight organic gels function as a new

  8. The simulation of the swelling and deswelling dynamics of gels

    Science.gov (United States)

    Yamaue, Tatsuya; Taniguchi, Takashi; Doi, Masao

    We have formulated the dynamics and the simulation scheme for large deformation of gels using the stress-diffusion coupling model [Yamaue, T., Taniguchi, T., and Doi, M., 2000, AIP Conference Proceedings, Vol. 519 (AIP), p. 584]. Using this model, we have simulated the deswelling process of 2D slab thermo-responsive gels undergoing spinodal decomposition, in comparison with the conventional collective diffusion model of gel networks. We reproduced the 'plateau period' due to the surface skin formation and the pattern formations in the inner region of gels by the stress-diffusion coupling model.

  9. A method for easily customizable gradient gel electrophoresis.

    Science.gov (United States)

    Miller, Andrew J; Roman, Brandon; Norstrom, Eric

    2016-09-15

    Gradient polyacrylamide gel electrophoresis is a powerful tool for the resolution of polypeptides by relative mobility. Here, we present a simplified method for generating polyacrylamide gradient gels for routine analysis without the need for specialized mixing equipment. The method allows for easily customizable gradients which can be optimized for specific polypeptide resolution requirements. Moreover, the method eliminates the possibility of buffer cross contamination in mixing equipment, and the time and resources saved with this method in place of traditional gradient mixing, or the purchase of pre-cast gels, are noteworthy given the frequency with which many labs use gradient gel SDS-PAGE. Copyright © 2016 Elsevier Inc. All rights reserved.

  10. Aging and nonlinear rheology of thermoreversible colloidal gels

    Science.gov (United States)

    Wagner, Norman; Gordon, Melissa; Kloxin, Christopher

    Colloidal dispersions are found in a wide variety of consumer products such as paint, food and pharmaceuticals. We investigate gel formation and aging in a thermoreverible gel consisting of octadecyl-coated silica nanoparticles suspended in n-tetradecane. In this system, the octadecyl brush can undergo a phase change allowing the attractions between particles to be tuned by temperature (1,2). By probing the system with steady shear and large amplitude oscillatory shear, we have studied the effect of thermal history and shear history on gel formation and gel mechanical properties during aging. Gels were formed by approaching a common temperature from above and below to determine a reference state from which creep tests were conducted. Creep ringing was observed as expected for the viscoelastic gel. The rheological aging is interpreted in terms of the gel microstructure formed with differing thermal and shear histories to determine how processing affects structure. Recently proposed scaling laws for the rheology and structure under flow are explored within the context of gel aging (3). Through rheological and microstructural measurements, we will further the understanding of gel formation and aging in this model system which may be applied to processing conditions in an industrial setting.

  11. Large electrorheological phenomena in graphene nano-gels

    Science.gov (United States)

    Dhar, Purbarun; Katiyar, Ajay; Pattamatta, Arvind; Das, Sarit K.

    2017-01-01

    Large-scale electrorheology (ER) response has been reported for dilute graphene nanoflake-based ER fluids that have been engineered as novel, readily synthesizable polymeric gels. Polyethylene glycol (PEG 400) based graphene gels have been synthesized and a very high ER response (∼125 000% enhancement in viscosity under influence of an electric field) has been observed for low concentration systems (∼2 wt.%). The gels overcome several drawbacks innate to ER fluids. The gels exhibit long term stability, a high graphene packing ratio which ensures very high ER response, and the microstructure of the gels ensures that fibrillation of the graphene nanoflakes under an electric field is undisturbed by thermal fluctuations, further leading to mega ER. The gels exhibit a large yield stress handling caliber with a yield stress observed as high as ∼13 kPa at 2 wt.% for graphene. Detailed investigations on the effects of graphene concentration, electric field strength, imposed shear resistance, transients of electric field actuation on the ER response and ER hysteresis of the gels have been performed. In-depth analyses with explanations have been provided for the observations and effects, such as inter flake lubrication/slip induced augmented ER response. The present gels show great promise as potential ER gels for various smart applications.

  12. High Impulse Nanoparticulate-Based Gel Propellants Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This proposed Small Business Innovative Research (SBIR) Phase I addresses the development of advanced gel propellants and determination of their suitability for...

  13. Coupling of gelation and glass transition in a biphasic colloidal mixture--from gel-to-defective gel-toglass

    Science.gov (United States)

    Cheng, He; Jia, Di; Han, Charles

    The state transition from gel to glass is studied in a biphasic mixture of polystyrene core/poly (N-isopropylacrylamide) shell (CS) microgels and sulfonated polystyrene (PSS) particles. At 35 °C, the interaction between CS is due to short-range Van der Waals attraction while that between PSS is from long-range electrostatic repulsion. During variation of the relative ratio of the two species at a fixed apparent total volume fraction, the mixture exhibits a gel-to-defective gel-to-glass transition. When small amounts of PSS are introduced into the CS gel network, some of them are kinetically trapped, causing a change in its fractal structure, and act as defects to weaken the macroscopic gel strength. An increase of PSS content in the mixture promotes the switch from gel to defective gel, e . g . , the typical two-step yielding gel merges into one-step yielding. This phenomenon is an indication that inter-cluster bond breakage coincides with intra-cluster bond fracture. As the relative volume fraction of PSS exceeds a critical threshold, the gel network can no longer be formed; hence, the mixture exhibits characteristics of glass. A state diagram of the biphasic mixture is constructed, and the landscape of the different transitions will be described in future studies The financial support from the National Basic Research Program of China (973 Program, 2012CB821500) is gratefully acknowledged.

  14. Gel-eletroforese no diagnóstico da varíola Gel-electrophoresis in the smallpox diagnosis

    Directory of Open Access Journals (Sweden)

    Julio A. Mesquita

    1972-01-01

    Full Text Available O emprego de gel-eletroforese no diagnóstico da varíola, demonstrou ser ao menos trinta vezes (30X mais sensível que o teste de agar-gel, nas condições descritas (tabela I. Doze (12 espécimes, cujos testes convencionais de inoculação em ovos embrionados e de agar-gel resultaram positivos, foram testados em suas diluições originais congeladas por mais de um ano, sendo seis deles revelados por gel-eletroforese enquanto nenhum o foi por agar-gel (tabela II. Trinta e três (33 amostras isoladas no laboratório, foram testadas com material colhido de membrana cório-alantóica da primeira inoculação para o diagnóstico, conservado em glicerina 50%, resultando 15 positivas em gel-eletroforese e apenas 3 em agar-gel (tabela II. Os últimos 60 espécimes recebidos para diagnóstico, através a Campanha de Erradicação da Varíola, também resultaram negativos em gel-eletroforese, que não mostrou falsos-positivos nas condições descritas.The test of gel-electrophoresis applied to the pox virus group showed to be at least thirth times (30X more sensitive than agar-gel test on the described conditions (Table I. Twelve specimens, which were positives form Smallpox in the conventional tests of egg inoculation and agar-gel difusion test, have been screened in their original dilutions frozen for more than 1 year and six of them were still detectable by gel-eletrophoresis, while by agar-gel test any of them was positive (Table II. Thirty three Smallpox isolates have been tested with material from first egg inoculation (chorioallantoic membranes which have been stored in glycerin 50%, at - 15ºC. Fifteen of them were still positive by gel-electrophoresis and only 3 by agar-gel (Table II. The last 60 specimens received for diagnosis from Smallpox Erradication Campaign (CEV, were negatives by both tests. The gel-electrophoresis, did not show false-positives on described conditions.

  15. Rheological, mucoadhesive and release properties of pluronic F-127 gel and pluronic F-127/polycarbophil mixed gel systems.

    Science.gov (United States)

    Tirnaksiz, F; Robinson, J R

    2005-07-01

    This study was designed to combine the mucoadhesive property of Noveon and the thermosensitive property of Pluronic F-127 into one gel system. A rheological study of Pluronic aqueous sols (10-35%), Noveon gels (0.5-2%) and of mixed gels containing Pluronic (10-17.5%) and polycarbophil (0.5-2.5%) was conducted at different temperatures (15-35 degrees C). The viscosity of Pluronic sols increased with an increase in temperature and the mixed gels had thermoreversible property. The viscosity of mixed gels was higher than that of the Pluronic sols containing only Pluronic because of the increase in total polymer concentration. No interaction was found between -COOH groups of Noveon and Pluronic molecules at the studied concentrations of polymers; the viscosity of mixed gels containing un-neutralized Noveon was lower than that of the neutralized mixed gels. The effect of Pluronic F-127 on the mucoadhesive property of Noveon was investigated. The mucoadhesive properties of Pluronic and Noveon gels were compared by a force of detachment test. It was found that Pluronic and Noveon gels showed approximately the same mucoadhesive strength. However, there were significant differences in the viscosity of Noveon and Pluronic gels. The adhesive force of the mixed gel was almost same as that of the Noveon gel. The Pluronic did not affect the adhesive power of Noveon and the increased viscosity did not affect the bioadhesive force of the mixed gels. In spite of increasing viscosity of the gel, the percentage of released model material (mannitol) increased with increasing temperature. This is based on the previously reported observation that the interaction between the Pluronic molecules squeezed mannitol molecules out of the polymer chains. The mannitol release obeyed zero-order kinetics and the flux values of mixed gels at 15 and 35 degrees C were very similar. The Noveon chains among Pluronic chains probably hindered the diffusion of mannitol molecules and the release was thus

  16. Treatment of cutaneous leishmaniasis: cassia fistula fruit gel- intralesional glucantime Vs. placebo gel- intralesional glucantime combination

    Directory of Open Access Journals (Sweden)

    Jaffary F

    2010-01-01

    Full Text Available "n Normal 0 false false false EN-US X-NONE AR-SA MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:Arial; mso-bidi-theme-font:minor-bidi;} Background: Cutaneous leishmaniasis is a major health problem in Iran and especially Isfahan province is considered as an endemic area for this disease. Regarding the previous report of positive effects of Cassia fistula boiled extract in the treatment of cutaneous leishmaniasis, this study was designed to evaluate the effect of combination therapy with intralesional meglumine antimoniate and Cassia fistula fruit gel compared to placebo in this disease."n"nMethods: 140 patients with cutaneous leishmaniasis referring to Skin Disease and Leishmaniasis Research Center of Isfahan (SDLRC were randomly allocated in two groups. One group received intralesional meglumine antimoniate injection and Cassia fistula fruit gel and the second group were treated with intralesional meglumine antimoniate and placebo gel. Improvement was defined as complete cure, partial cure and treatment failure. "n"nResults: At 12 week, 47 patients treated with intralesional meglumine antimoniate and topical Cassia fistula fruit gel achieved complete cure (67.1% compared to 29(41.4% patients in placebo treated group. There was significant difference in cure rate between two treatment groups of this study (p<0.001. Nine patients (19% in each group

  17. Radiological properties of MAGIC normoxic polymer gel dosimetry

    Science.gov (United States)

    Aljamal, M.; Zakaria, A.; Shamsuddin, S.

    2013-04-01

    For a polymer gel dosimeter to be of use in radiation dosimetry, it should display water-equivalent radiological properties. In this study, the radiological properties of the MAGIC (Methacrylic and Ascorbic acid in Gelatin Initiated by Copper) normoxic polymer gels were investigated. The mass density (ρ) was determined based on Archimedes' principle. The weight fraction of elemental composition and the effective atomic number (Zeff) were calculated. The electron density was also measured with 90° scattering angle at room temperature. The linear attenuation coefficient (μ) of unirradiated gel, irradiated gel, and water were determined using Am-241 based on narrow beam geometry. Monte Carlo simulation was used to calculate the depth doses response of MAGIC gel and water for 6MV photon beam. The weight fractions of elements composition of MAGIC gel were close to that for water. The mass density was found to be 1027 ± 2 kg m-3, which is also very close to mass density of muscle tissue (1030 kg m-3) and 2.7% higher than that of water. The electron density (ρe) and atomic number (Zeff) were found to be 3.43 × 1029 e m-3 and 7.105, respectively. The electron density measured was 2.6% greater than that for water. The atomic number was very close to that for water. The prepared MAGIC gel was found to be water equivalent based on the study of element composition, mass density, electron density and atomic number. The linear attenuation coefficient of unirradiated gel was very close to that of water. The μ of irradiated gel was found to be linear with dose 2-40 Gy. The depth dose response for MAGIC gel from a 6 MV photon beam had a percentage dose difference to water of less than 1%. Therefore it satisfies the criteria to be a good polymer gel dosimeter for radiotherapy.

  18. Kinetics of swelling of polyelectrolyte gels: Fixed degree of ionization

    Science.gov (United States)

    Sen, Swati; Kundagrami, Arindam

    2015-12-01

    The swelling kinetics of uncharged and charged polymer (polyelectrolyte) gels in salt-free conditions is studied in one dimension by solving the constitutive equation of motion (Newton's law for the elementary gel volume) of the displacement variable by two theoretical methods: one in which the classical definition of stress is used with the bulk modulus taken as a parameter, and the other in which a phenomenological expression of the osmotic stress as a function of polymer density and degree of ionization is taken as an input to the dynamics. The time-evolution profiles for spatially varying polymer density and stress, along with the location of the gel-solvent interface, are obtained from the two methods. We show that both the polymer density (volume fraction) and stress inside the gel follow expected behaviours of being maximum for the uniformly shrunken gel, and relaxing slowly to the lowest values as the gel approaches equilibrium. We further show that, by comparing the temporal profiles of the gel-solvent interface and other variables between the two methods, one may attempt to assign an effective bulk modulus to the polyelectrolyte gel as a function of the degree of ionization and other parameters of the gel such as hydrophobicity, cross-link density, and the temperature. The major result we get is that the effective bulk modulus of a polyelectrolyte gel increases monotonically with its degree of ionization. In the process of identifying the parameters for a monotonic swelling, we calculated using a well-known expression of the free energy the equilibrium results of two-phase co-existence and the critical point of a polyelectrolyte gel with a fixed degree of ionization.

  19. Kinetics of swelling of polyelectrolyte gels: Fixed degree of ionization

    Energy Technology Data Exchange (ETDEWEB)

    Sen, Swati; Kundagrami, Arindam, E-mail: arindam@iiserkol.ac.in [Department of Physical Sciences, Indian Institute of Science Education and Research, Kolkata, Mohanpur 741246, West Bengal (India)

    2015-12-14

    The swelling kinetics of uncharged and charged polymer (polyelectrolyte) gels in salt-free conditions is studied in one dimension by solving the constitutive equation of motion (Newton’s law for the elementary gel volume) of the displacement variable by two theoretical methods: one in which the classical definition of stress is used with the bulk modulus taken as a parameter, and the other in which a phenomenological expression of the osmotic stress as a function of polymer density and degree of ionization is taken as an input to the dynamics. The time-evolution profiles for spatially varying polymer density and stress, along with the location of the gel-solvent interface, are obtained from the two methods. We show that both the polymer density (volume fraction) and stress inside the gel follow expected behaviours of being maximum for the uniformly shrunken gel, and relaxing slowly to the lowest values as the gel approaches equilibrium. We further show that, by comparing the temporal profiles of the gel-solvent interface and other variables between the two methods, one may attempt to assign an effective bulk modulus to the polyelectrolyte gel as a function of the degree of ionization and other parameters of the gel such as hydrophobicity, cross-link density, and the temperature. The major result we get is that the effective bulk modulus of a polyelectrolyte gel increases monotonically with its degree of ionization. In the process of identifying the parameters for a monotonic swelling, we calculated using a well-known expression of the free energy the equilibrium results of two-phase co-existence and the critical point of a polyelectrolyte gel with a fixed degree of ionization.

  20. Enhanced local anesthetic action of mepivacaine from the bioadhesive gels.

    Science.gov (United States)

    Cho, Cheong-Weon; Choi, Jun-Shik; Shin, Sang-Chul

    2011-01-01

    Mepivacaine, an amide-type local anesthetic, has been used to relieve local pain. Among the many drug delivery systems, transdermal drug delivery has some advantages, as it provides controlled drug delivery for an extended period of time. To develop new gel formulations that have suitable bioadhesion, the bioadhesive force of hydroxypropyl methylcellulose (HPMC) was assessed using an auto-peeling tester. The effect of drug concentration on drug release from 2% HPMC gel was studied using synthetic cellulose membrane at 37±0.5°C. The drug concentrations tested were 0.5, 1, 1.5, 2, and 2.5%. The effect of temperature on drug release from the 2% drug gel was evaluated at 27, 32, 37 and 42°C. To increase the skin permeation of mepivacaine from HPMC gel, enhancers such as saturated and unsaturated fatty acids, pyrrolidones, propylene glycol derivatives, glycerides, and non-ionic surfactants were incorporated into the mepivacaine-HPMC gels. The enhancing effect of the enhancer on drug permeation was then examined in the modified Keshary-Chien cell. For the efficacy study, the anesthetic action of the formulated mepivacaine gel containing enhancer and vasoconstrictor was evaluated with the tail-flick analgesimeter. Among the various kinds of HPMC, HPMC-K100M gel showed the highest viscosity and bioadhesive force. As the viscosity of the HPMC gels increased, the bioadhesive forces increased. Increasing the drug concentration or temperature increased the drug release rate. Among the enhancers used, polyoxyethylene 2-oleyl ether showed the greatest enhancement of permeation. Based on the area under the efficacy curve of the rat tail flick test curve, mepivacaine gel containing polyoxyethylene 2-oleyl ether and tetrahydrozoline showed prolonged and increased local anesthetic action compared to the control. For bioadhesive mepivacaine gels with enhanced local anesthetic action, mepivacaine gels containing penetration enhancer and vasoconstrictor could be developed with the

  1. Antibiotic-containing hyaluronic acid gel as an antibacterial carrier: Usefulness of sponge and film-formed HA gel in deep infection.

    Science.gov (United States)

    Matsuno, Hiroaki; Yudoh, Kazuo; Hashimoto, Masamichi; Himeda, Yasukazu; Miyoshi, Teruzo; Yoshida, Kaoru; Kano, Syogo

    2006-03-01

    We have developed a novel bioabsorbable antibacterial carrier using hyaluronic acid (HA) gel for prevention and treatment of orthopedic infections. In this study, we investigated the in vivo antibacterial effects of two forms of this new material, an HA gel sponge and an HA gel film. A titanium cylinder was inserted into the intramedullary cavity of each rabbit femur, along with an HA gel sponge or HA gel film containing antibiotics. The HA gel sponge contained gentamycin, vancomycin, tobramycin, or minomycin. The HA gel film contained gentamycin or vancomycin. After 0, 7, and 14 days, the rabbit bone marrow was collected, and the antibacterial activity of the HA gel was determined by agar diffusion test. As a control, we used Septocoll, a commercially available antibacterial carrier. Both the HA gel sponge and HA gel film exhibited antibacterial activity. The present results indicate that HA gel containing antibiotics is a clinically useful bioabsorbable antibacterial carrier.

  2. Novel macroporous amphoteric gels: Preparation and characterization

    Directory of Open Access Journals (Sweden)

    S. Kudaibergenov

    2012-05-01

    Full Text Available Macroporous amphoteric gels based on allylamine, methacrylic acid and acrylamide crosslinked by N,N'-methylenebisacrylamide were synthesized by radical copolymerization of monomers in cryoconditions. The composition of cryogels was determined by combination of potentiometric and conductimetric titrations. The morphology of cryogels was evaluated by scanning electron microscope (SEM. Cryogels exhibited sponge-like porous structure with pore size ranging from 50 to 200 μm. The values of the isoelectric points (IEPs determined from the swelling experiments arranged between 3.5 and 4.3. The high adsorption-desorption capacity of amphoteric cryogels with respect to mM and trace concentrations of copper, nickel, and cobalt ions was demonstrated. It was shown that the macroporous amphoteric cryogels are able to adsorb up to 99.9% of copper, nickel, and cobalt ions from 10–3 mol•L–1 aqueous solution.

  3. Water-gel for gating graphene transistors.

    Science.gov (United States)

    Kim, Beom Joon; Um, Soong Ho; Song, Woo Chul; Kim, Yong Ho; Kang, Moon Sung; Cho, Jeong Ho

    2014-05-14

    Water, the primary electrolyte in biology, attracts significant interest as an electrolyte-type dielectric material for transistors compatible with biological systems. Unfortunately, the fluidic nature and low ionic conductivity of water prevents its practical usage in such applications. Here, we describe the development of a solid state, megahertz-operating, water-based gate dielectric system for operating graphene transistors. The new electrolyte systems were prepared by dissolving metal-substituted DNA polyelectrolytes into water. The addition of these biocompatible polyelectrolytes induced hydrogelation to provide solid-state integrity to the system. They also enhanced the ionic conductivities of the electrolytes, which in turn led to the quick formation of an electric double layer at the graphene/electrolyte interface that is beneficial for modulating currents in graphene transistors at high frequencies. At the optimized conditions, the Na-DNA water-gel-gated flexible transistors and inverters were operated at frequencies above 1 MHz and 100 kHz, respectively.

  4. Electrochemistry of polyamidoamine dendrimers ester gel electrolytes

    Institute of Scientific and Technical Information of China (English)

    CHEN Hong; MO Zunli

    2004-01-01

    This paper described the first example of polyamidoamine dendrimers ester (PAMAM) used as a gel electrolyte with a short-chain polyethylene glycol (MPEG-400) as a plasticizer. The polymer films are solid and sticky. Background cyclic voltammetry (CV) shows a potential window between +0.7 and -0.7 V vs. Ag/AgCl. The voltammetry of ferrocene and 7,7,8,8-tetracyanoquinodimethane (TCNQ) indicates that diffusion coefficients are in the range of 10-a-10-9 cm2/s.Ionic conductivities are approximately 10-6 S/cm. Similar films using dimethyl sulfoxide (DMSO) as a plasticizer instead of MPEG-400 have demonstrated ionic conductivities of 10-4 S/cra and reversible voltammetry. However, UV spectrophotometry shows that 70% of the DMSO is lost under vacuum, indicating the difficulty in quantifying the DMSO content when exposed to vacuum.

  5. Clotrimazole nanoparticle gel for mucosal administration

    Energy Technology Data Exchange (ETDEWEB)

    Esposito, Elisabetta, E-mail: ese@unife.it [Department of Pharmaceutical Sciences, University of Ferrara, I-44121 Ferrara (Italy); Ravani, Laura [Department of Pharmaceutical Sciences, University of Ferrara, I-44121 Ferrara (Italy); Contado, Catia [Department of Chemistry, University of Ferrara, Ferrara (Italy); Costenaro, Andrea [Department of Pharmaceutical Sciences, University of Ferrara, I-44121 Ferrara (Italy); Drechsler, Markus [Macromolecular Chemistry II, University of Bayreuth (Germany); Rossi, Damiano [Department of Biology and Evolution, LT Terra and Acqua Tech UR7, University of Ferrara, Ferrara (Italy); Menegatti, Enea [Department of Pharmaceutical Sciences, University of Ferrara, I-44121 Ferrara (Italy); Grandini, Alessandro [Department of Biology and Evolution, LT Terra and Acqua Tech UR7, University of Ferrara, Ferrara (Italy); Cortesi, Rita [Department of Pharmaceutical Sciences, University of Ferrara, I-44121 Ferrara (Italy)

    2013-01-01

    In this study a formulation suitable to be applied on oral and/or vaginal mucosa has been developed for the treatment of fungal infections. The aim of the research is a comparison between clotrimazole (CLO) containing semisolid formulations based on monoolein aqueous dispersion (MAD) or nanostructured lipid carrier (NLC). MAD and NLC have been characterized in terms of morphology and dimensional distribution by cryogenic Transmission Electron Microscopy (cryo-TEM) and Photon Correlation Spectroscopy (PCS). CLO was encapsulated with high entrapment efficiency both in MAD and in NLC, according to Sedimentation Field Flow Fractionation (SdFFF) combined with HPLC. CLO recovery in MAD and NLC has been investigated by time. In order to obtain formulations with suitable viscosity for mucosal application, MAD was diluted with a carbomer gel, while NLC was directly viscosized by the addition of poloxamer 407 in the dispersion. The rheological properties of MAD and NLC after viscosizing have been investigated. Franz cell has been employed to study CLO diffusion from the different vehicles, evidencing diffusion rates from MAD and NLC superimposable to that obtained using Canesten{sup Registered-Sign }. An anticandidal activity study demonstrated that both CLO-MAD and CLO-NLC were more active against Candida albicans with respect to the pure drug. Highlights: Black-Right-Pointing-Pointer Comparison between monoolein aqueous dispersion (MAD) and nanostructured lipid carrier (NLC). Black-Right-Pointing-Pointer Clotrimazole (CLO) encapsulated with high entrapment efficiency both in MAD and in NLC. Black-Right-Pointing-Pointer The solid matrix of NLC controls CLO degradation better than MAD. Black-Right-Pointing-Pointer CLO containing MAD and NLC exhibits a higher anticandidal activity than the free drug. Black-Right-Pointing-Pointer Simple production of CLO-NLC based poloxamer gel, suitable for industry scaling up.

  6. Nanocrystalline Pentaerythritoltetranitrate using Sol-Gel Process

    Directory of Open Access Journals (Sweden)

    Sanjay Vishwasrao Ingale

    2011-10-01

    Full Text Available The secondary explosives developed with reduced particle size tend to be more insensitive for mechanical stimuli and may release energy with faster rate and gaining more importance nowadays. Therefore, aiming to reduce the particle size of one of the popular explosives, viz., pentaerythritoltetranitrate (PETN to the nanometer range, a method for preparation of nanocrystalline PETN in the silica (SiO2 gel matrix using sol-gel process has been demonstrated. The PETN-SiO2 xerogels were prepared containing PETN content ranging from 50 per cent to 90 per cent (w/w and the xerogels were characterised using different techniques. An exothermic peak at around 185 oC preceded by an endotherm in thermal analysis accompanied with weight loss in the temperature range from 150 oC to 200 oC   for the xerogel confirmed the presence of PETN in xerogel. Infrared spectra of xerogels showed peaks at around 1285 cm-1 and 1700 cm-1 assigned to O-NO2 and C-O bond representing PETN. Small angle x-ray scattering measurements on xerogels indicated that PETN entered in the pores of silica matrix. Transmission electron microscopy revealed that cystalline PETN    with particle size of around 15 nm dispersed in silica xerogel. The specific surface area for the PETN-SiO2 (90:10 xerogels was found to be 75 m2/g.Defence Science Journal, 2011, 61(6, pp.534-539, DOI:http://dx.doi.org/10.14429/dsj.61.594

  7. Phyllosilicates and Amorphous Gel in the Nakhlites

    Science.gov (United States)

    Hicks, L. J.; Bridges, J. C.; Gurman, S. J.

    2013-09-01

    Previous studies of the nakhlite martian meteorites have revealed hydrothermal minerals present within the fractures of the olivine minerals and the mesostasis. The olivine fractures of the Lafayette nakhlite reveal variations with initial deposits of siderite on the fracture walls, followed by crystalline phyllosilicates (smectite), and finishing with a rapidly cooled amorphous silicate gel within the central regions of the fractures. The mesostasis fractures of Lafayette also contain a crystalline phyllosilicate (serpentine). The amorphous gel is the most abundant secondary phase within the fractures of the other nakhlites [1, 2]. By studying nine nakhlite samples, including Lafayette, Governador Valadares, Nakhla, Y-000593, Y-000749, Miller-Range 03346, NWA 817, NWA 998, and NWA 5790, our aim is to constrain the identity of the phyllosilicate secondary phase minerals found throughout the nakhlite martian meteorites. This is achieved using methods including Electron Probe Micro-analysis (EPMA); X-ray Absorption Near-Edge Structure (Fe-K XANES) spectroscopy measured using Beamline I-18 at the Diamond Light Source synchrotron; and the use of Transmission Electron Microscopy (TEM) at the University of Leicester for High-Resolution (HR) imaging and Selected Area Electron Diffraction (SAED). BF studying nine nakhlite samples, including Lafayette, Governador Valadares, Nakhla, Y-000593, Y-000749, Miller-Range 03346, NWA 817, NWA 998, and NWA 5790, our aim is to constrain the identity of the phyllosilicate secondary phase minerals found throughout the nakhlite martian meteorites. This is achieved using methods including Electron Probe Micro-analysis (EPMA); X-ray Absorption Near-Edge Structure (Fe-K XANES) spectroscopy measured using Beamline I-18 at the Diamond Light Source synchrotron; and the use of Transmission Electron Microscopy (TEM) at the University of Leicester for High-Resolution (HR) imaging and Selected Area Electron Diffraction (SAED).

  8. Modelling of erosion of bentonite gel by gel/sol flow

    Energy Technology Data Exchange (ETDEWEB)

    Moreno, Luis; Neretnieks, Ivars; Longcheng Liu (Chemical Engineering and Technology, School of Chemical Science and Engineering, Royal Institute of Technology, Stockholm (Sweden))

    2010-11-15

    Bentonite intrusion into a fracture intersecting the canister deposition hole is modelled. The model describes the expansion of the bentonite within the fracture. It accounts for the repulsive electrostatic double-layer forces, the attractive van der Waals forces and friction forces between the particles and the water. The model also takes into account the diffusion of the colloid particles in the smectite sol. Diffusion of a counterion, sodium, is accounted for as this strongly influences the double layer force and the viscosity of the gel/sol. The gel/sol is considered to be a fluid with a varying viscosity that is strongly dependent on the bentonite volume fraction in the gel and the sodium concentration in the water. Two different geometries were modelled; a rectangular and a cylindrical. The rectangular geometry was used to gain experience with the processes and mechanisms and how they interact since the cylindrical geometry was somewhat less stable numerically and more time consuming. In the rectangular geometry a fracture 1 metre long in the flow direction was modelled. In both geometries the fracture size was selected sufficiently large to ensure that the water velocity, near the distant border was nearly the same as the approaching water velocity and that the smectite concentration there was vanishingly small. It was found that the velocity of the fluid drops considerably where the bentonite volume fraction is larger than 1-2%. This is due to the strong increase in viscosity with increasing bentonite volume fraction. The loss of smectite by the slowly flowing fluid was found to be proportional to the square root of the seeping water velocity for the rectangular geometry. For the cylindrical geometry, the dependence is somewhat lower (exponent about 0.4) since the length of the gel/water interface decreases with increasing water flow rate. The penetration depth of the gel/water interface decreases with increasing water flow rate. For water velocity of the

  9. One step antiglare sol-gel coating for screens by sol-gel techniques

    OpenAIRE

    Schelle, Christian; Mennig, Martin; Krug, Herbert; Jonschker, Gerhard; Schmidt, Helmut K.

    1997-01-01

    Anti-reflection coatings on glass substrates were prepared by the application of sol-gel coatings of silica containing crystalline tin oxide particles. The sol was coated on commercially available float glass by dip-coating and spin-coating techniques. Increasing the surface roughness of the float glass (factor of 50) by a particulate coating material resulted in anti-reflection effects comparable to frosted glass. Haze and clarity, which are a measure for the contrast and definition of an op...

  10. Low pH induces an interdigitated gel to bilayer gel phase transition in dihexadecylphosphatidylcholine membrane.

    Science.gov (United States)

    Furuike, S; Levadny, V G; Li, S J; Yamazaki, M

    1999-10-01

    We have investigated the influence of pH on the structures and phase behaviors of multilamellar vesicles of the ether-linked dihexadecylphosphatidylcholine (DHPC-MLV). This phospholipid is known to be in the interdigitated gel (L(beta)I) phase in excess water at 20 degrees C at neutral pH. The results of X-ray diffraction experiments indicate that a phase transition from L(beta)I phase to the bilayer gel phase occurred in DHPC-MLV in 0.5 M KCl around pH 3.9 with a decrease in pH, and that at low pH values, less than pH 2.2, DHPC-MLVs were in L(beta') phase. The results of fluorescence and light scattering method indicate that the gel to liquid-crystalline phase transition temperature (T(m)) of DHPC-MLV increased with a decrease in pH. On the basis of a thermodynamic analysis, we conclude that the main mechanism of the low-pH induced L(beta)I to bilayer gel phase transition in DHPC-MLV and the increase in its T(m) is connected with the decrease in the repulsive interaction between the headgroups of these phospholipids. As pH decreases, the phosphate groups of the headgroups begin to be protonated, and as a result, the apparent positive surface charges appear. However, surface dipoles decrease and the interaction free energy of the hydrophilic segments with water increases. The latter effect dominates the pure electrostatic repulsion between the charged headgroups, and thereby, the total repulsive interaction in the interface decreases.

  11. Quantitative characterization of developing collagen gels using optical coherence tomography

    Science.gov (United States)

    Levitz, David; Hinds, Monica T.; Choudhury, Niloy; Tran, Noi T.; Hanson, Stephen R.; Jacques, Steven L.

    2010-03-01

    Nondestructive optical imaging methods such as optical coherence tomography (OCT) have been proposed for characterizing engineered tissues such as collagen gels. In our study, OCT was used to image collagen gels with different seeding densities of smooth muscle cells (SMCs), including acellular gels, over a five-day period during which the gels contracted and became turbid with increased optical scattering. The gels were characterized quantitatively by their optical properties, specified by analysis of OCT data using a theoretical model. At 6 h, seeded cell density and scattering coefficient (μs) were correlated, with μs equal to 10.8 cm-1/(106 cells/mL). Seeded cell density and the scattering anisotropy (g) were uncorrelated. Over five days, the reflectivity in SMC gels gradually doubled with little change in optical attenuation, which indicated a decrease in g that increased backscatter, but only a small drop in μs. At five days, a subpopulation of sites on the gel showed substantially higher reflectivity (approximately a tenfold increase from the first 24 h). In summary, the increased turbidity of SMC gels that develops over time is due to a change in the structure of collagen, which affects g, and not simply due to a change in number density of collagen fibers due to contraction.

  12. Transfer printing of thermoreversible ion gels for flexible electronics.

    Science.gov (United States)

    Lee, Keun Hyung; Zhang, Sipei; Gu, Yuanyan; Lodge, Timothy P; Frisbie, C Daniel

    2013-10-09

    Thermally assisted transfer printing was employed to pattern thin films of high capacitance ion gels on polyimide, poly(ethylene terephthalate), and SiO2 substrates. The ion gels consisted of 20 wt % block copolymer poly(styrene-b-ethylene oxide-b-styrene and 80 wt % ionic liquid 1-ethyl-3-methylimidazolium bis(trifluoromethyl sulfonyl)amide. Patterning resolution was on the order of 10 μm. Importantly, ion gels containing the block polymer with short PS end blocks (3.4 kg/mol) could be transfer-printed because of thermoreversible gelation that enabled intimate gel-substrate contact at 100 °C, while gels with long PS blocks (11 kg/mol) were not printable at the same temperature due to poor wetting contact between the gel and substrates. By using printed ion gels as high-capacitance gate insulators, electrolyte-gated thin-film transistors were fabricated that operated at low voltages (<1 V) with high on/off current ratios (∼10(5)). Statistical analysis of carrier mobility, turn-on voltage, and on/off ratio for an array of printed transistors demonstrated the excellent reproducibility of the printing technique. The results show that transfer printing is an attractive route to pattern high-capacitance ion gels for flexible thin-film devices.

  13. Fibril Formation from Pea Protein and Sesequent Gel Formation

    NARCIS (Netherlands)

    Munialo, C.D.; Martin, A.H.; Linden, van der E.; Jongh, de H.H.J.

    2014-01-01

    The objective of this study was to characterize fibrillar aggregates made using pea proteins, to assemble formed fibrils into protein-based gels, and to study the rheological behavior of these gels. Micrometer-long fibrillar aggregates were observed after pea protein solutions had been heated for 20

  14. Gadolinium-loaded gel scintillators for neutron and antineutrino detection

    Science.gov (United States)

    Riddle, Catherine Lynn; Akers, Douglas William; Demmer, Ricky Lynn; Paviet, Patricia Denise; Drigert, Mark William

    2016-11-29

    A gadolinium (Gd) loaded scintillation gel (Gd-ScintGel) compound allows for neutron and gamma-ray detection. The unique gel scintillator encompasses some of the best features of both liquid and solid scintillators, yet without many of the disadvantages associated therewith. Preferably, the gel scintillator is a water soluble Gd-DTPA compound and water soluble fluorophores such as: CdSe/ZnS (or ZnS) quantum dot (Q-dot) nanoparticles, coumarin derivatives 7-hydroxy-4-methylcoumarin, 7-hydroxy-4-methylcoumarin-3-acetic acid, 7-hydroxycoumarin-3-carboxylic acid, and Alexa Fluor 350 as well as a carbostyril compound, carbostyril 124 in a stable water-based gel, such as methylcellulose or polyacrylamide polymers. The Gd-loaded ScintGel allows for a homogenious distribution of the Gd-DTPA and the fluorophores, and yields clean fluorescent emission peaks. A moderator, such as deuterium or a water-based clear polymer, can be incorporated in the Gd-ScintGel. The gel scintillators can be used in compact detectors, including neutron and antineutrino detectors.

  15. Gel Electrophoresis--The Easy Way for Students

    Science.gov (United States)

    VanRooy, Wilhelmina; Sultana, Khalida

    2010-01-01

    This article describes a simple, inexpensive, easy to conduct gel-electrophoresis activity using food dyes. It is an alternative to the more expensive counterparts which require agarose gel, DNA samples, purchased chamber and Tris-borate-EDTA buffer. We suggest some learning activities for senior biology students along with comments on several…

  16. Fibril Formation from Pea Protein and Subsequent Gel Formation

    NARCIS (Netherlands)

    Munialo, XC.D.; Martin, A.H.; Linden, E. van der; Jongh, H.H.J de

    2014-01-01

    The objective of this study was to characterize fibrillar aggregates made using pea proteins, to assemble formed fibrils into protein-based gels, and to study the rheological behavior of these gels. Micrometer-long fibrillar aggregates were observed after pea protein solutions had been heated for 20

  17. Deformation and fracture behavior of simulated particle gels

    NARCIS (Netherlands)

    Rzepiela, A.A.

    2003-01-01

    In this PhD project rheological properties of model particle gels are investigated using Brownian Dynamics (BD) simulations. Particle gels are systems of colloidal particles that form weakly bonded percolating networks interpenetrated by a suspending fluid. They are characterized as s

  18. Rheological properties of rennet-induced skim milk gels.

    NARCIS (Netherlands)

    Zoon, P.

    1988-01-01

    The rheological properties of rennet-induced skim milk gels, which are viscoelastic materials, were studied under various conditions.Dynamic and stress relaxation experiments were performed at small deformations of the gel network, whereas constant stress (creep) experiments were performed at large

  19. Self-Healing Corrosion Protective Sol-Gel Coatings

    NARCIS (Netherlands)

    Abdolah Zadeh, M.

    2016-01-01

    Inspired by the state of the art and the recent advances in the field of self-healing corrosion protective coatings, the thesis entitled “Self-healing corrosion protective sol-gel coatings” addresses novel routes to self-healing corrosion protective sol-gel coatings via extrinsic and intrinsic

  20. Self-Healing Corrosion Protective Sol-Gel Coatings

    NARCIS (Netherlands)

    Abdolah Zadeh, M.

    2016-01-01

    Inspired by the state of the art and the recent advances in the field of self-healing corrosion protective coatings, the thesis entitled “Self-healing corrosion protective sol-gel coatings” addresses novel routes to self-healing corrosion protective sol-gel coatings via extrinsic and intrinsic heali

  1. Biocatalysis with Sol-Gel Encapsulated Acid Phosphatase

    Science.gov (United States)

    Kulkarni, Suhasini; Tran, Vu; Ho, Maggie K.-M.; Phan, Chieu; Chin, Elizabeth; Wemmer, Zeke; Sommerhalter, Monika

    2010-01-01

    This experiment was performed in an upper-level undergraduate biochemistry laboratory course. Students learned how to immobilize an enzyme in a sol-gel matrix and how to perform and evaluate enzyme-activity measurements. The enzyme acid phosphatase (APase) from wheat germ was encapsulated in sol-gel beads that were prepared from the precursor…

  2. SYNTHESIS OF HIGH THERMOSTABLE SILICONE GELS CONSTRUCTED WITH LADDERLIKE POLYSILSESQUIOXANES

    Institute of Scientific and Technical Information of China (English)

    Huai-zhong Pan; Ming Cao; Jian-hua Luo; Ping Xie; Rong-ben Zhang; Yu-hui Lin; Neal Tai-sheng Chung

    2000-01-01

    Heat-resistant silicone gels were synthesized by replacing the single main chain polymethylhydrosiloxane with reactive ladderlike polyhydrosilsesquioxane copolymers. Because of the interaction between polydimethylsiloxane chains and the ladderlike polysilsesquioxanes chains, the cyclization of the polydimethylsiloxane chains is hindered. The high thermal stability of the ladderlike polymers can improve the thermal stability of the silicone gels without sacrificing their good comprehensive properties.

  3. How it all began: a personal history of gel electrophoresis.

    Science.gov (United States)

    Smithies, Oliver

    2012-01-01

    Arne Tiselius' moving boundary electrophoresis method was still in general use in 1951 when this personal history begins, although zonal electrophoresis with a variety of supporting media (e.g., filter paper or starch grains) was beginning to replace it. This chapter is an account of 10 years of experiments carried out by the author during which molecular sieving gel electrophoresis was developed and common genetic variants of two proteins, haptoglobin and transferrin, were discovered in normal individuals. Most of the figures are images of pages from the author's laboratory notebooks, which are still available, so that some of the excitement of the time and the humorous moments are perhaps apparent. Alkaline gels, acidic gels with and without denaturants, vertical gels, two-dimensional gels, and gels with differences in starch concentration are presented. The subtle details that can be discerned in these various gels played an indispensable role in determining the nature of the change in the haptoglobin gene (Hp) that leads to the polymeric series characteristic of Hp ( 2 ) /Hp ( 2 ) homozygotes. Where possible, the names of scientific friends who made this saga of gel electrophoresis so memorable and enjoyable are gratefully included.

  4. Inexpensive and Safe DNA Gel Electrophoresis Using Household Materials

    Science.gov (United States)

    Ens, S.; Olson, A. B.; Dudley, C.; Ross, N. D., III; Siddiqi, A. A.; Umoh, K. M.; Schneegurt, M. A.

    2012-01-01

    Gel electrophoresis is the single most important molecular biology technique and it is central to life sciences research, but it is often too expensive for the secondary science classroom or homeschoolers. A simple safe low-cost procedure is described here that uses household materials to construct and run DNA gel electrophoresis. Plastic…

  5. Gel Electrophoresis--The Easy Way for Students

    Science.gov (United States)

    VanRooy, Wilhelmina; Sultana, Khalida

    2010-01-01

    This article describes a simple, inexpensive, easy to conduct gel-electrophoresis activity using food dyes. It is an alternative to the more expensive counterparts which require agarose gel, DNA samples, purchased chamber and Tris-borate-EDTA buffer. We suggest some learning activities for senior biology students along with comments on several…

  6. Physical Properties of Substituted Imidazolium Based Ionic Liquids Gel Electrolytes

    Science.gov (United States)

    Sutto, Thomas E.; De Long, Hugh C.; Trulove, Paul C.

    2002-11-01

    The physical properties of solid gel electrolytes of either polyvinylidene diflurohexafluoropropylene or a combination of polyvinylidene hexafluoropropylene and polyacrylic acid, and the molten salts 1-ethyl-3-methylimidazolium tetrafluoroborate, 1,2-dimethyl-3-n-propylimidazolium tetrafluoroborate, and the new molten salts 1,2-dimethyl-3-n-butylimidazolium tetrafluoroborate, and 1,2-dimethyl-3-n-butylimidazolium hexafluorophosphate were characterized by temperature dependent ionic conductivity measurements for both the pure molten salt and of the molten salt with 0.5 M Li+ present. Ionic conductivity data indicate that for each of the molten salts, the highest concentration of molten salt allowable in a single component polymer gel was 85%, while gels composed of 90%molten salt were possible when using both polyvinylidene hexafluorophosphate and polyacrylic acid. For polymer gel composites prepared using lithium containing ionic liquids, the optimum polymer gel composite consisted of 85% of the 0.5 M Li+/ionic liquid, 12.75% polyvinylidene hexafluoropropylene, and 2.25% poly (1-carboxyethylene). The highest ionic conductivity observed was for the gel containing 90%1-ethyl-3-methyl-imidazolium tetrafluoroborate, 9.08 mS/cm. For the lithium containing ionic liquid gels, their ionic conductivity ranged from 1.45 to 0.05 mS/cm, which is comparable to the value of 0.91 mS/cm, observed for polymer composite gels containing 0.5 M LiBF4 in propylene carbonate.

  7. Regioselective immobilization of short oligonucleotides to acrylic copolymer gels.

    Science.gov (United States)

    Timofeev, E; Kochetkova, S V; Mirzabekov, A D; Florentiev, V L

    1996-01-01

    Four types of polyacrylamide or polydimethyl-acrylamide gels for regioselective (by immobilization at the 3' end) of short oligonucleotides have been designed for use in manufacturing oligonucleotide microchips. Two of these supports contain amino or aldehyde groups in the gel, allowing coupling with oligonucleotides bearing aldehyde or amino groups, respectively, in the presence of a reducing agent. The aldehyde gel support showed a higher immobilization efficiency relative to the amino gel. Of all reducing agents tested, the best results were obtained with a pyridine-borane complex. The other supports are based on an acrylamide gel activated with glutaraldehyde or a hydroxyalkyl-functionalized gel treated with mesyl chloride. The use of dimethylacrylamide instead of acrylamide allows subsequent gel modifications in organic solvents. All the immobilization methods are easy and simple to perform, give high and reproducible yields, allow long durations of storage of the activated support, and provide high stability of attachment and low non-specific binding. Although these gel supports have been developed for preparing oligonucleotide microchips, they may be used for other purposes as well. PMID:8774893

  8. Spectroscopic studies of triethoxysilane sol-gel and coating process.

    Science.gov (United States)

    Li, Ying-Sing; Ba, Abdul

    2008-10-01

    Silica sol-gels have been prepared under different conditions using triethoxysilane (TES) as precursor. The prepared sol-gels have been used to coat aluminum for corrosion protection. Vibrational assignments have been made for most vibration bands of TES, TES sol-gel, TES sol-gel-coated aluminum and xerogel. It has been noticed that air moisture may have helped the hydrolysis of the thin coating films. Xerogels have been obtained from the sol-gel under different temperature conditions and the resulting samples have been characterized by using infrared and Raman spectroscopic methods. IR data indicate that the sol-gel process is incomplete under the ambient conditions although an aqueous condition can have slightly improved the process. Two nonequivalent silicon atoms have been identified from the collected 29Si NMR spectra for the sol-gel, supporting the result derived from the IR data. The frequency of Si-H bending vibration has been found to be more sensitive to the skeletal structure than that of the Si-H stretching vibration. A higher temperature condition could favor the progression of hydrolysis and condensation. A temperature higher than 300 degrees C would cause sample decomposition without seriously damaging the silica network. From infrared intensity measurements and thermo-gravimetric analyses, the fractions of incomplete hydrolysis and condensation species have been estimated to be 4% and 3%, respectively. Electrochemical data have shown that the sol-gel coating significantly improves the corrosion protection properties of aluminum.

  9. Silica gel stimulates the hydrolysis of lecithin by phospholipase A

    NARCIS (Netherlands)

    Goerke, J.; Gier, J. de; Bonsen, P.P.M.

    1971-01-01

    1. 1. Silica gel stimulates the hydrolysis of aqueous lecithin suspensions by phospholipase A. The activation is slightly greater than that caused by ether and takes place equally well in bulk suspensions of silica gel or on thin-layer Chromatographic plates prepared with silica. 2. 2. The hydrolys

  10. Inexpensive and Safe DNA Gel Electrophoresis Using Household Materials

    Science.gov (United States)

    Ens, S.; Olson, A. B.; Dudley, C.; Ross, N. D., III; Siddiqi, A. A.; Umoh, K. M.; Schneegurt, M. A.

    2012-01-01

    Gel electrophoresis is the single most important molecular biology technique and it is central to life sciences research, but it is often too expensive for the secondary science classroom or homeschoolers. A simple safe low-cost procedure is described here that uses household materials to construct and run DNA gel electrophoresis. Plastic…

  11. Explorative data analysis of two-dimensional electrophoresis gels

    DEFF Research Database (Denmark)

    Schultz, J.; Gottlieb, D.M.; Petersen, Marianne Kjerstine;

    2004-01-01

    Methods for classification of two-dimensional (2-DE) electrophoresis gels based on multivariate data analysis are demonstrated. Two-dimensional gels of ten wheat varieties are analyzed and it is demonstrated how to classify the wheat varieties in two qualities and a method for initial screening...

  12. Highly Elastic and Self-Healing Composite Colloidal Gels.

    NARCIS (Netherlands)

    Diba, M.; Wang, H.; Kodger, T.E.; Parsa, S.; Leeuwenburgh, S.C.G.

    2017-01-01

    Composite colloidal gels are formed by the pH-induced electrostatic assembly of silica and gelatin nanoparticles. These injectable and moldable colloidal gels are able to withstand substantial compressive and tensile loads, and exhibit a remarkable self-healing efficiency. This study provides new,

  13. Comparison of Two Types of Gels in Improving Burn Wound

    Directory of Open Access Journals (Sweden)

    Rahimzadeh Golnar

    2014-01-01

    Full Text Available Objective: Kefir are natural probiotic compounds with anti-inflammatory properties, which were tested in experimental burn injury. Kefir gels were prepared from an extract of continuously cultured kefir in Man, Rogosa and Sharpe Broth medium for 48 and 96 h. Their extracts were used for evaluation of antibacterial effect against Pseudomonas aeruginosa in standard sample (ATCC 27853 and samples taken from patients with burns. The antibacterial effect of different kefir extract was assessment of minimum inhibitory concentration and minimum bactericidal concentration. The density of bacteria and percentage of organic acids (lactic and acetic acids were also determined. Materials and Methods: Similar burn injuries were made on dorsal skin surface of 40 rats. The rats were divided into 5 groups of 8 rats each. The base gel, silver sulfadiazine ointment, kefir 48 h gel, kefir 96 h gel were applied twice daily. Burn wound area was measured at baseline, 1 and 2 weeks. Results: Results indicated that by increasing the time of fermentation, concentration of lactic and acetic acid increased in orders of: Kefir 48 h < kefir 96 h, the end of the 2nd week the percentage of wound size were lowest in order of kefir 96 h gel < kefir grains 48 h gel < silver sulfadiazine 1% < untreated and based gel groups. Conclusion: In conclusion, the kefir gel therapy was an effective therapeutic approach to improve outcomes after severe burn when compared with conventional silver sulfadiazine treatment.

  14. Gadolinium-loaded gel scintillators for neutron and antineutrino detection

    Energy Technology Data Exchange (ETDEWEB)

    Riddle, Catherine Lynn; Akers, Douglas William; Demmer, Ricky Lynn; Paviet, Patricia Denise; Drigert, Mark William

    2016-11-29

    A gadolinium (Gd) loaded scintillation gel (Gd-ScintGel) compound allows for neutron and gamma-ray detection. The unique gel scintillator encompasses some of the best features of both liquid and solid scintillators, yet without many of the disadvantages associated therewith. Preferably, the gel scintillator is a water soluble Gd-DTPA compound and water soluble fluorophores such as: CdSe/ZnS (or ZnS) quantum dot (Q-dot) nanoparticles, coumarin derivatives 7-hydroxy-4-methylcoumarin, 7-hydroxy-4-methylcoumarin-3-acetic acid, 7-hydroxycoumarin-3-carboxylic acid, and Alexa Fluor 350 as well as a carbostyril compound, carbostyril 124 in a stable water-based gel, such as methylcellulose or polyacrylamide polymers. The Gd-loaded ScintGel allows for a homogenious distribution of the Gd-DTPA and the fluorophores, and yields clean fluorescent emission peaks. A moderator, such as deuterium or a water-based clear polymer, can be incorporated in the Gd-ScintGel. The gel scintillators can be used in compact detectors, including neutron and antineutrino detectors.

  15. Rheological properties of soybean protein isolate gels containing emulsion droplets

    NARCIS (Netherlands)

    Kim, K.H.; Renkema, J.M.S.; Vliet, van T.

    2001-01-01

    Rheological properties of soybean protein gels containing various volume fractions oil droplets have been studied at small and large deformations. Dynamic viscoelastic properties of soybean protein isolate gels were determined as a function of the volume fraction of oil droplets stabilised by the sa

  16. Method of making ionic liquid mediated sol-gel sorbents

    Energy Technology Data Exchange (ETDEWEB)

    Malik, Abdul; Shearrow, Anne M.

    2017-01-31

    Ionic liquid (IL)-mediated sol-gel hybrid organic-inorganic materials present enormous potential for effective use in analytical microextraction. One obstacle to materializing this prospect arises from high viscosity of ILs significantly slowing down sol-gel reactions. A method was developed which provides phosphonium-based, pyridinium-based, and imidazolium-based IL-mediated advanced sol-gel organic-inorganic hybrid materials for capillary microextraction. Scanning electron microscopy results demonstrate that ILs can serve as porogenic agents in sol-gel reactions. IL-mediated sol-gel coatings prepared with silanol-terminated polymers provided up to 28 times higher extractions compared to analogous sol-gel coatings prepared without any IL in the sol solution. This study shows that IL-generated porous morphology alone is not enough to provide effective extraction media: careful choice of the organic polymer and the precursor with close sol-gel reactivity must be made to ensure effective chemical bonding of the organic polymer to the created sol-gel material to be able to provide the desired sorbent characteristics.

  17. Formulation of niosomal gel for enhanced transdermal lopinavir delivery and its comparative evaluation with ethosomal gel.

    Science.gov (United States)

    Patel, Ketul K; Kumar, Praveen; Thakkar, Hetal P

    2012-12-01

    The aim was to develop niosomal gel as a transdermal nanocarrier for improved systemic availability of lopinavir. Niosomes were prepared using thin-film hydration method and optimized for molar quantities of Span 40 and cholesterol to impart desirable characteristics. Comparative evaluation with ethosomes was performed using ex vivo skin permeation, fluorescence microscopy, and histopathology studies. Clinical utility via transdermal route was acknowledged using in vivo bioavailability study in male Wistar rats. The niosomal formulation containing lopinavir, Span 40, and cholesterol in a molar ratio of 1:0.9:0.6 possessed optimally high percentage of drug entrapment with minimum mean vesicular diameter. Ex vivo skin permeation studies of lopinavir as well as fluorescent probe coumarin revealed a better deposition of ethosomal carriers but a better release with niosomal carriers. Histopathological studies indicated the better safety profile of niosomes over ethosomes. In vivo bioavailability study in male Wistar rats showed a significantly higher extent of absorption (AUC(0→∞), 72.87 h × μg/ml) of lopinavir via transdermally applied niosomal gel as compared with its oral suspension. Taken together, these findings suggested that niosomal gel holds a great potential of being utilized as novel, nanosized drug delivery vehicle for transdermal lopinavir delivery.

  18. Oscillatory and electrohydrodynamic instabilities in flow over a viscoelastic gel

    Indian Academy of Sciences (India)

    R M Thaokar

    2015-05-01

    The stability of oscillatory flows over compliant surfaces is studied analytically and numerically. The type of compliant surfaces studied is the incompressible viscoelastic gel model. The stability is determined using the Floquet analysis, where amplitude of perturbations at time intervals separated by one time period is examined to determine whether perturbations grow or decay. Oscillatory flows pas viscoelastic gels exhibit an instability in the limit of zero Reynolds number, and the transition amplitude of the oscillatory velocity increases with the frequency of oscillations. The transition amplitude has a minimum at a finite wavenumber for the viscoelastic gel model. The instability is found to depend strongly on the gel viscosity $\\eta_{g}$, and the effect of oscillations on the continuation of viscous modes at intermediate Reynolds number shows a complicated dependence on the oscillation frequency. Experimental studies are carried out on the stability of an oscillatory flow past a viscoelastic gel at zero Reynolds number, and these confirm the theoretical predictions.

  19. Nonflammable gel electrolyte containing alkyl phosphate for rechargeable lithium batteries

    Science.gov (United States)

    Yoshimoto, Nobuko; Niida, Yoshihiro; Egashira, Minato; Morita, Masayuki

    A nonflammable polymeric gel electrolyte has been developed for rechargeable lithium battery systems. The gel film consists of poly(vinylidenefluoride- co-hexafluoropropylene) (PVdF-HFP) swollen with lithium hexafluorophosphate (LiPF 6) solution in ternary solvent containing trimethyl phosphate (TMP). High ionic conductivity of 6.2 mS cm -1 at 20 °C was obtained for the gel electrolyte consisting of 0.8 M LiPF 6/EC + DEC + TMP (55:25:20) with PVdF-HFP, which is comparable to that of the liquid electrolyte containing the same electrolytic salt. Addition of a small amount of vinylene carbonate (VC) in the gel electrolyte improved the rechargeability of a graphite electrode. The rechargeable capacity of the graphite in the gel containing VC was ca. 300 mAh g -1, which is almost the same as that in a conventional liquid electrolyte system.

  20. Volume phase transitions of cholesteric liquid crystalline gels

    Energy Technology Data Exchange (ETDEWEB)

    Matsuyama, Akihiko, E-mail: matuyama@bio.kyutech.ac.jp [Department of Bioscience and Bioinformatics, Faculty of Computer Science and Systems Engineering, Kyushu Institute of Technology, Kawazu 680-4, Iizuka, Fukuoka 820-8502 (Japan)

    2015-05-07

    We present a mean field theory to describe anisotropic deformations of a cholesteric elastomer without solvent molecules and a cholesteric liquid crystalline gel immersed in isotropic solvents at a thermal equilibrium state. Based on the neoclassical rubber theory of nematic elastomers, we derive an elastic energy and a twist distortion energy, which are important to determine the shape of a cholesteric elastomer (or gel). We demonstrate that when the elastic energy dominates in the free energy, the cholesteric elastomer causes a spontaneous compression in the pitch axis and elongates along the director on the plane perpendicular to the pitch axis. Our theory can qualitatively describe the experimental results of a cholesteric elastomer. We also predict the first-order volume phase transitions and anisotropic deformations of a gel at the cholesteric-isotropic phase transition temperature. Depending on a chirality of a gel, we find a prolate or oblate shape of cholesteric gels.

  1. Optical and electrochemical sol-gel sensors for inorganic species

    Institute of Scientific and Technical Information of China (English)

    Royce; N.DANSBY-SPARKS

    2009-01-01

    The use of sol-gels as a sensing matrix for the development of unique sensing strategies is discussed.Sol-gels offer almost limitless possibilities for sensing substrates due to the variety of physical properties that can be obtained by altering a number of discussed fabrication conditions and techniques.By careful consideration of the sensing requirements,novel detection methods have been developed for a variety of analytes and applications.Here,sol-gels have been used to monitor pH at the extreme ends of the scale([H+] = 1―11 M and [OH-] = 1―10 M) and in mixed solvent/solute systems using dual sensing approaches.The use of ligand-grafted sol-gel monoliths for optical determination of metal ion species is also discussed.The electrochemical determination of Cr(Ⅵ) by electrodeposited sol-gel modified electrodes is also presented.

  2. Fullerenol-containing Materials Derived by Sol-gel Processing

    Institute of Scientific and Technical Information of China (English)

    Haiping XIA; Zhaoyang JIANG; Jianli ZHANG; Jinhao WANG; Yuepin ZHANG; Qiuhua NIE

    2004-01-01

    Water soluble fullerenols were synthesized and incorporated in SiO2, SiO2-TiO2, GPTMS-SiO2, GPTMS-ATPS inorganic and organic-inorganic materials by sol-gel processes. The maximum concentrations of C60(OH)n and C7o(OH)n in the obtained SiO2 gels were estimated to be about 0.6% and 1.5% in weight, respectively. The characteristics of the UV/visible spectra of fullerenols in H2O and various gels were measured and compared. The thermal stability of fullerenols in gels was investigated with differential thermal analysis (DTA). The results indicate that the absorption features of fullerenols in solid gels are similar to those in H2O and the fullerenols in SiO2 are stable at 400℃. The optical limiting effect of the fullerenols was investigated preliminarily.

  3. Sol-gel materials for optofluidics - process and applications

    DEFF Research Database (Denmark)

    Mikkelsen, Morten Bo Lindholm

    2011-01-01

    This Ph.D. thesis is concerned with the use of sol-gel materials in optofluidic applications and the physics of DNA molecules in nanoconfinement. The bottom-up formation of solid material, which is provided by the sol-gel process, enables control of the chemical composition and porosity...... of the material. At early stages of gelation, thin gel coatings can be structured by nanoimprint lithography, and purely inorganic silica materials can be obtained by subsequent thermal annealing. The sol-gel process thus constitutes a unique method for nanofabrication of silica materials of special properties....... In this work, sol-gel silica is introduced as a new material class for the fabrication of lab-on-a-chip devices for DNA analysis. An imprint process with a rigid, non-permeable stamp was developed, which enabled fabrication of micro- and nanofluidic silica channels in a single process step without use of any...

  4. Molecular Gels Materials with Self-Assembled Fibrillar Networks

    CERN Document Server

    Weiss, Richard G

    2006-01-01

    Molecular gels and fibrillar networks – a comprehensive guide to experiment and theory Molecular Gels: Materials with Self-Assembled Fibrillar Networks provides a comprehensive treatise on gelators, especially low molecular-mass gelators (LMOGs), and the properties of their gels. The structures and modes of formation of the self-assembled fibrillar networks (SAFINs) that immobilize the liquid components of the gels are discussed experimentally and theoretically. The spectroscopic, rheological, and structural features of the different classes of LMOGs are also presented. Many examples of the application of the principal analytical techniques for investigation of molecular gels (including SANS, SAXS, WAXS, UV-vis absorption, fluorescence and CD spectroscopies, scanning electron, transmission electron and optical microscopies, and molecular modeling) are presented didactically and in-depth, as are several of the theories of the stages of aggregation of individual LMOG molecules leading to SAFINs. Several actua...

  5. Optical and electrochemical sol-gel sensors for inorganic species

    Institute of Scientific and Technical Information of China (English)

    Royce N.DANSBY-SPARKS; OUYANG RuiZhuo; XUE ZiLing

    2009-01-01

    The use of sol-gels as a sensing matrix for the development of unique sensing strategies is discussed.Sol-gels offer almost limitless possibilities for sensing substrates due to the variety of physical properties that can be obtained by altering a number of discussed fabrication conditions and techniques.By careful consideration of the sensing requirements,novel detection methods have been developed for a variety of analytes and applications.Here,sol-gels have been used to monitor pH at the extreme ends of the scale ([H~+]=1-11 M and[OH~-]=1-10 M) and in mixed solvent/solute systems using dual sensing approaches.The use of ligand-grafted sol-gel monoliths for optical determination of metal ion species is also discussed.The electrochemical determination of Cr(Ⅵ) by electrodeposited sol-gel modified electrodes is also presented.

  6. Conductivity behaviour of polymer gel electrolytes: Role of polymer

    Indian Academy of Sciences (India)

    S S Sekhon

    2003-04-01

    Polymer is an important constituent of polymer gel electrolytes along with salt and solvent. The salt provides ions for conduction and the solvent helps in the dissolution of the salt and also provides the medium for ion conduction. Although the polymer added provides mechanical stability to the electrolytes yet its effect on the conductivity behaviour of gel electrolytes as well as the interaction of polymer with salt and solvent has not been conclusively established. The conductivity of lithium ion conducting polymer gel electrolytes decreases with the addition of polymer whereas in the case of proton conducting polymer gel electrolytes an increase in conductivity has been observed with polymer addition. This has been explained to be due to the role of polymer in increasing viscosity and carrier concentration in these gel electrolytes.

  7. Swelling properties of cross-linked DNA gels.

    Science.gov (United States)

    Costa, Diana; Miguel, M Graça; Lindman, Björn

    2010-07-12

    This work represents our contribution to the field of physical chemistry of DNA gels, and concerns the synthesis and study of novel chemically cross-linked DNA gels. The use of covalent DNA gels is a very promising way to study DNA-cosolute interactions, as well as the dynamic behaviour of DNA and cationic compacting agents, like lipids, surfactants and polycations. Manipulating DNA in new ways, like DNA networks, allows a better understanding and characterization of DNA-cosolute complexes at the molecular level, and also allows us to follow the assembly structures of these complexes. The use of responsive polymer gels for targeted delivery of toxic and/or labile drugs has, during the past few years, shown to be a promising concept. The features found in the proposed system would find applications in a broader field of gel/drug interaction, for the development of controlled release and targeted delivery devices.

  8. The Chemistry and Applications of π-Gels

    Science.gov (United States)

    Ghosh, Samrat; Praveen, Vakayil K.; Ajayaghosh, Ayyappanpillai

    2016-07-01

    π-Gels are a promising class of functional soft materials formed out of short π-conjugated molecules. By utilizing the chemistry of noncovalent interactions, researchers have created a wide range of π-gels that are composed of supramolecular polymers. During the last two decades, supramolecular gel chemistry has been pursued with the hope of developing new materials for applications in, for example, organic electronics, energy harvesting, sensing, and imaging. The high expectations for π-gels were centered mainly around their electronic properties, such as tunable emission, energy transfer, electron transfer, charge transport, and electrical conductivity; such properties are amenable to modulation through size and shape control of molecular assemblies. Although a large number of exciting publications have appeared, a major technological breakthrough is yet to be realized. In this review, we analyze the recent advancements in the area of functional π-gels and their scope in future applications.

  9. Method for preparing hydrous zirconium oxide gels and spherules

    Science.gov (United States)

    Collins, Jack L.

    2003-08-05

    Methods for preparing hydrous zirconium oxide spherules, hydrous zirconium oxide gels such as gel slabs, films, capillary and electrophoresis gels, zirconium monohydrogen phosphate spherules, hydrous zirconium oxide spherules having suspendable particles homogeneously embedded within to form a composite sorbent, zirconium monohydrogen phosphate spherules having suspendable particles of at least one different sorbent homogeneously embedded within to form a composite sorbent having a desired crystallinity, zirconium oxide spherules having suspendable particles homogeneously embedded within to form a composite, hydrous zirconium oxide fiber materials, zirconium oxide fiber materials, hydrous zirconium oxide fiber materials having suspendable particles homogeneously embedded within to form a composite, zirconium oxide fiber materials having suspendable particles homogeneously embedded within to form a composite and spherules of barium zirconate. The hydrous zirconium oxide spherules and gel forms prepared by the gel-sphere, internal gelation process are useful as inorganic ion exchangers, catalysts, getters and ceramics.

  10. Comparison of dosimetry gels prepared by agar and bovine gelatine

    Science.gov (United States)

    Sağsöz, M. E.; Korkut, Ö.; Alemdar, N.; Aktaş, S.; Çalı, E. B.; Kantarcı, M.

    2016-04-01

    Gel dosimeters are unique materials capable of showing three dimensional (3D) dose distributions of therapeutic or diagnostic exposures. Fricke gel dosimeters can be considered as chemical dosimeters that rely on a radiation-induced chemical reaction. Dose distribution of Fricke solutions containing Fe+2 ions determines the transformation of acidic, oxygen saturated Fe+2 ions to Fe+3 ions by the ionizing radiation in aqueous solutions. In this study we produced two different types of gel dosimeters using agar and bovine gelatin with similar fabrication methods. We compared the magnetic resonance (MR) T1 imaging responses of these two gel dosimeters to acquire a dose dependency of MR intensities. In conclusion agar gel dosimeters found to be produced easily and more consistent.

  11. Viscoelastic nature of Au nanoparticle–PDMS nanocomposite gels

    Indian Academy of Sciences (India)

    Ritu Gupta; Hima K Nagamanasa; Rajesh Ganapathy; Giridhar U Kulkarni

    2015-08-01

    A stable gel of Au nanoparticles in polydimethylsiloxane (PDMS) nanocomposite is prepared by employing the curing agent of PDMS elastomer as a reducing agent for the formation of Au nanoparticles by an in-situ process. The viscoelastic nature of these gels is very sensitive to the Au nanoparticle loading and the synthetic temperature conditions. Even a very low Au content of 0.09 wt% is sufficient enough to bring in the transition from sponge state to gel state at room temperature. Higher synthetic temperature also forms sponge formation. Infrared and ultraviolet–visible spectroscopy measurements have provided insight into PDMS crosslinking and nanoparticle formation, respectively. The optimization of the gel properties can have direct influence on the processability of Au nanoparticle–PDMS nanocomposite gels, with interesting implications in electronic, optical and microfluidic devices.

  12. Elasto-hydrodynamic network analysis of colloidal gels

    Science.gov (United States)

    Swan, James; Varga, Zsigmond

    Colloidal gels formed at low particle volume fractions result from a competition between two rate processes: aggregation of colloids and compaction of pre-gel aggregates. Recent work has shown that the former process is highly sensitive to the nature of the hydrodynamic interactions between suspended colloids. This same sensitivity to hydrodynamic flows within the gel leads to pronounced differences in the spectrum of relaxation times and response to deformation of the gel. This talk explores those differences and their consequences through computational simulations and the framework of elasto-hydrodynamic network analysis. We demonstrate a significant impact of hydrodynamic interactions between gelled colloids on macroscopic gel dynamics and rheology as well as the effect of hydrodynamic screening in gelled materials.

  13. Tetracaine gel vs EMLA cream for percutaneous anaesthesia in children

    DEFF Research Database (Denmark)

    Rømsing, Janne; Henneberg, S W; Walther-Larsen, S

    1999-01-01

    We have evaluated the anaesthetic effect of tetracaine gel 1 g, applied for 45 min, compared with EMLA cream 2 g, applied for 60 min, in a randomized, double-blind study in 60 children aged 3-15 yr. Venous cannulation was performed 15 min after removal of the EMLA cream (n = 20) and tetracaine gel...... no pain compared with only 10% in the EMLA group. Only minor adverse effects were observed. We conclude that tetracaine gel provided effective, rapid, long-lasting and safe local anaesthesia, and was significantly better than EMLA cream in reducing pain during venous cannulation in children using...... (n = 20). Cannulation was performed up to 215 min after removal of the tetracaine gel in another 20 patients. Significantly lower pain scores were recorded by the children treated with tetracaine gel compared with EMLA cream (P

  14. Tetracaine gel vs EMLA cream for percutaneous anaesthesia in children

    DEFF Research Database (Denmark)

    Rømsing, Janne; Henneberg, S W; Walther-Larsen, S

    1999-01-01

    We have evaluated the anaesthetic effect of tetracaine gel 1 g, applied for 45 min, compared with EMLA cream 2 g, applied for 60 min, in a randomized, double-blind study in 60 children aged 3-15 yr. Venous cannulation was performed 15 min after removal of the EMLA cream (n = 20) and tetracaine gel...... (n = 20). Cannulation was performed up to 215 min after removal of the tetracaine gel in another 20 patients. Significantly lower pain scores were recorded by the children treated with tetracaine gel compared with EMLA cream (P ... no pain compared with only 10% in the EMLA group. Only minor adverse effects were observed. We conclude that tetracaine gel provided effective, rapid, long-lasting and safe local anaesthesia, and was significantly better than EMLA cream in reducing pain during venous cannulation in children using...

  15. Effect of chemical treatment of silicon gel on tissue compatibility

    Institute of Scientific and Technical Information of China (English)

    吴欣怡; 阎颖; 杜立群

    2004-01-01

    Background Silicon gel is unfavourable for cell attachment and growth. This study was to study if pretreating the surface of silicon gel with chemical agents affects the proliferation of epithelial cells. Methods Silicon gel was made and treated with either mixed acid solution (containing 232 g/dm3 of H2SO4 and 8 g/dm3 of K2Cr2O7) or 300 cm3/dm3 peroxide for 5, 10, and 15 minutes or 10, 15, and 20 minutes, respectively. The cultured corneal epithelial cells were seeded onto those silicon gels and kept for 13 days. Immunohistochemical investigations were then carried out for integrin (alpha 6 or beta 4) and actin. Results Growth of the epithelial cells in silicon gels treated with mixed acid solution for 10 minutes and 15 minutes was much significant than that in the untreated gels. After a 12-hour culture, a small number of corneal epithelial cells were proliferated on the surface of the silicon gels that had been treated with peroxide for 15 minutes. After a 3-day culture, those cells were further proliferated and fused together. The corneal epithelial cells did not grow well in the silicon gels treated with peroxide for 10 or 20 minutes. Immunostaining revealed the expression of actin and integrin alpha 6 or beta 4 on the silicon gels that were treated with mixed acid solution for 10 minutes or peroxide for 15 minutes. Conclusion Silicon gels treated either with mixed acid solution for 10 or 15 minutes or with peroxide for 15 minutes improves cell proliferation.

  16. Primary hepatocyte culture in collagen gel mixture and collagen sandwich

    Institute of Scientific and Technical Information of China (English)

    Ying-Jie Wang; Hong-Ling Liu; Hai-Tao Guo; Hong-Wei Wen; Jun Liu

    2004-01-01

    AIM: To explore the methods of hepatocytes culture in a collagen gel mixture or between double layers of collagen sandwich configuration and to examine the functional and cytomorphological characteristics of cultured hepatocytes.METHODS: A two-step collagenase perfusion technique was used to isolate the hepatocytes from Wistar rats or newborn Chinese experimental piglets. The isolated hepatocytes were cultured in a collagen gel mixture or between double layers of collagen sandwich configuration respectively. The former was that rat hepatocytes were mixed with type I rat tail collagen solution till gelled, and the medium was added onto the gel. The latter was that swine hepatocytes were seeded on a plate precoated with collagen gel for 24 h, then another layer of collagen gel was overlaid, resulting in a sandwich configuration. The cytomorphological characteristics, albumin secretion, and LDH-release of the hepatocytes cultured in these two models were examined.RESULTS: Freshly isolated rat hepatocytes were successfully mixed and fixed in collagen gel, and cultured in the gel condition. During the culture period, the urea synthesized and secreted by rat hepatocytes was detected throughout the period. Likewise, newborn experimental piglet hepatocytes were successfully fixed between the double layers of collagen gel, forming a sandwich configuration.Within a week of culture, the albumin secreted by swine hepatocytes was detected by SDS/PAGE analysis. The typical cytomorphological characteristics of the hepatocytes cultured by the above two culture models were found under a phasecontrast microscope. There was little LDH-release during the culture period.CONCLUSION: Both collagen gel mixture and double layers of collagen sandwich configuration can provide cultural conditions much closer to in vivoenvironment, and are helpful for maintaining specific hepatic fiJnctions and cytomorphological characteristics. A collagen gel mixture culture may be more eligible for the

  17. Crystallinity and stoichiometry of nano-structured sol-gel-derived BaTiO{sub 3} monolithic gels

    Energy Technology Data Exchange (ETDEWEB)

    Shimooka, Hirokazu [Kyushu Inst. of Tech., Kitakyushu, Fukuoka (Japan). Dept. of Applied Chemistry; Kuwabara, Makoto [Univ. of Tokyo (Japan). Dept. of Materials Science

    1996-11-01

    The crystallization behavior and stoichiometric changes of barium titanium alkoxide-derived monolithic gels prepared by the sol-gel process using a high-concentration Ba,Ti precursor solution (0.8 mol/L) were investigated during aging at room temperature. Crystallization of the gels (which were amorphous, per X-ray diffraction analysis immediately after gelation) into the BaTiO{sub 3} perovskite phase increased during aging and was associated with significant shrinkage of the gels. Crystallization reached a value of {approximately}82% by the final stage of shrinkage, assuming the degree of crystallization of a gel treated at 600 C to be 100%. The stoichiometry of the gels (Ba/Ti molar ratio) also changed considerably during aging, as estimated by the concentrations of Ba and Ti that remained in the expelled liquid resulting from syneresis at any time during the aging process. Deviation in the Ba/Ti ratio of the precursor solution ranged from 0.015 at the initial stage of shrinkage to 0.003 at the final stage, a value determined by inductively coupled plasma atomic emission spectroscopy. The present study demonstrates the great advantage of using high-concentration precursor solutions of barium titanium alkoxides, rather than low-concentration solutions, to obtain BaTiO{sub 3} gel monoliths with high density and crystallinity and little stoichiometric deviation, by sol-gel processing at room temperature.

  18. Influence of pre-cooking protein paste gelation conditions and post-cooking gel storage conditions on gel texture.

    Science.gov (United States)

    Paker, Ilgin; Matak, Kristen E

    2016-01-15

    Gelation conditions affect the setting of myofibrillar fish protein gels. Therefore the impact of widely applied pre-cooking gelation time/temperature strategies and post-cooking period on the texture and color of final protein gels was determined. Four pre-cooking gelation strategies (no setting time, 30 min at 25 °C, 1 h at 40 °C or 24 h at 4 °C) were applied to protein pastes (fish protein concentrate and standard functional additives). After cooking, texture and color were analyzed either directly or after 24 h at 4 °C on gels adjusted to 25 °C. No-set gels were harder, gummier and chewier (P gelation strategy. Pre-cooking gelation conditions will affect final protein gel texture and color, with gel stability benefiting from a gel-setting period. However, post-cooking storage may have a greater impact on final gels, with textural attributes becoming more consistent between all samples. © 2015 Society of Chemical Industry.

  19. The interactions between oil droplets and gel matrix affect the lubrication properties of sheared emulsion-filled gels

    NARCIS (Netherlands)

    Chojnicka, A.; Sala, G.; Kruif, de C.G.; Velde, van de F.

    2009-01-01

    In this work the lubrication behaviour of emulsions, gels, and emulsion-filled gels was studied in relation to their composition and structure. It was found that emulsions had much lower friction coefficients than their continuous phases. Emulsions with 40 wt% oil had the same friction coefficient a

  20. [THE USE OF THE COMMERCIAL APPARATUS DUAL GEL MODULE FOR THE TWO-DIMENSIONAL POLYACRYLAMIDE GEL ELECTROPHORESIS].

    Science.gov (United States)

    Evteeva, I N; Starkova, T Yu; Artemov, A V; Barlev, N A

    2015-01-01

    Two-dimensional gel electrophoresis, continues to be one of the fundamental methods to study the biological protein diversity. This method described by O'Farrell in 1975 includes two following steps: isoelectric focusing in the first dimension and polyacrylamide gel electrophoretic fractionation of proteins according to their molecular weight in the second dimension. In this manuscript we described several technical parameters of the commercial apparatus Dual Gel Module for the gel electrophoresis by means of which it is possible to accomplish the electrophoretic protein fractionation in both dimensions. The distribution of the highly purified commercial proteins used as molecular standards in the detection system of the apparatus Dual Gel Module was identical to the commercial strips of the device GE Healthcare, USA.

  1. ANALISIS KEKUATAN GEL (GEL STRENGTH PRODUK PERMEN JELLY DARI GELATIN KULIT IKAN CUCUT DENGAN PENAMBAHAN KARAGINAN DAN RUMPUT LAUT

    Directory of Open Access Journals (Sweden)

    pipih - suptijah

    2014-06-01

    Full Text Available AbstrakPermen jelly merupakan permen bertekstur kenyal dengan penambahan komponen hidrokoloid,misalnya agar, gum, pektin, pati, karaginan, gelatin, dan lain-lain yang digunakan untuk modifi kasitekstur sehingga menghasilkan produk yang kenyal. Penelitian ini bertujuan menentukan kekuatan gel (gelstrength dan formulasi terbaik dari permen jelly yang berasal dari gelatin kulit ikan cucut dan karaginan.Metode analisis yang digunakan, meliputi analisis proksimat, pH, rendemen, viskositas, analisis sensori,dan kekuatan gel. Konsentrasi asam asetat terbaik dalam pembuatan gelatin adalah 0,1 N dan formulasipermen jelly terbaik terdapat pada permen jelly yang dibuat dari gelatin 1,75% dan karaginan 3,50% denganmenghasilkan kekuatan gel 169,35 N/cm2.Kata kunci: gelatin, ikan cucut, kekuatan gel (gel strength, permen jelly

  2. Agarose gel electrophoresis for the separation of DNA fragments.

    Science.gov (United States)

    Lee, Pei Yun; Costumbrado, John; Hsu, Chih-Yuan; Kim, Yong Hoon

    2012-04-20

    Agarose gel electrophoresis is the most effective way of separating DNA fragments of varying sizes ranging from 100 bp to 25 kb(1). Agarose is isolated from the seaweed genera Gelidium and Gracilaria, and consists of repeated agarobiose (L- and D-galactose) subunits(2). During gelation, agarose polymers associate non-covalently and form a network of bundles whose pore sizes determine a gel's molecular sieving properties. The use of agarose gel electrophoresis revolutionized the separation of DNA. Prior to the adoption of agarose gels, DNA was primarily separated using sucrose density gradient centrifugation, which only provided an approximation of size. To separate DNA using agarose gel electrophoresis, the DNA is loaded into pre-cast wells in the gel and a current applied. The phosphate backbone of the DNA (and RNA) molecule is negatively charged, therefore when placed in an electric field, DNA fragments will migrate to the positively charged anode. Because DNA has a uniform mass/charge ratio, DNA molecules are separated by size within an agarose gel in a pattern such that the distance traveled is inversely proportional to the log of its molecular weight(3). The leading model for DNA movement through an agarose gel is "biased reptation", whereby the leading edge moves forward and pulls the rest of the molecule along(4). The rate of migration of a DNA molecule through a gel is determined by the following: 1) size of DNA molecule; 2) agarose concentration; 3) DNA conformation(5); 4) voltage applied, 5) presence of ethidium bromide, 6) type of agarose and 7) electrophoresis buffer. After separation, the DNA molecules can be visualized under uv light after staining with an appropriate dye. By following this protocol, students should be able to: Understand the mechanism by which DNA fragments are separated within a gel matrix Understand how conformation of the DNA molecule will determine its mobility through a gel matrix Identify an agarose solution of appropriate

  3. 78 FR 19271 - Draft Guidance for Industry on Bioequivalence Recommendations for Metronidazole Vaginal Gel...

    Science.gov (United States)

    2013-03-29

    ... Recommendations for Metronidazole Vaginal Gel; Availability AGENCY: Food and Drug Administration, HHS. ACTION... guidance for industry entitled ``Bioequivalence Recommendations for Metronidazole Vaginal Gel.'' The... abbreviated new drug applications (ANDAs) for metronidazole vaginal gel. DATES: Although you can comment...

  4. Tuning viscoelastic properties of supramolecular peptide gels via dynamic covalent crosslinking.

    Science.gov (United States)

    Khalily, Mohammad Aref; Goktas, Melis; Guler, Mustafa O

    2015-02-21

    A dynamic covalent crosslinking approach is used to crosslink supramolecular peptide gels. This novel approach facilitates tuning viscoelastic properties of the gel and enhances mechanical stability (storage modulus exceeding 10(5) Pa) of the peptide gels.

  5. 76 FR 58462 - Information Collection; Qualified Products List for Water Enhancers (Gels) for Wildland Firefighting

    Science.gov (United States)

    2011-09-21

    ... Forest Service Information Collection; Qualified Products List for Water Enhancers (Gels) for Wildland... Products List for Water Enhancers (Gels) for Wildland Firefighting. DATES: Comments must be received in.... SUPPLEMENTARY INFORMATION: Title: Qualified Products List for Water Enhancers (Gels) for Wildland...

  6. Western Blot of Stained Proteins from Dried Polyacrylamide Gels

    Science.gov (United States)

    Gruber, Claudia; Stan-Lotter, Helga

    1996-01-01

    Western blotting of proteins is customarily performed following their separation on polyacrylamide gels, either prior to staining (1) or, as recently reported, following staining (2). We describe here Western blotting with stained gels, which had been dried and some of which had been stored for years. This procedure permits immunological analysis of proteins, to which antisera may have become available only later, or where the application of newly developed sensitive detection methods is desired. Once rehydration of the gels is achieved, proteins can be-transferred to blotting membranes by any appropriate protocol. Proteins stained with Coomassie Blue have to be detected with a non-chromogenic method, such as the film-based enhanced chemiluminescence (ECL)2) procedure (3). Silver stained proteins, which transfer in the colorless form, may be visualized by any detection method, although, because of the usually very low amounts of proteins, detection by ECL is preferable. Blotting of stained proteins from rehydrated gels is as rapid and as quantitative as from freshly prepared gels, in contrast to blotting from wet stained gels, which requires extensive washing and results in low transfer efficiency (2). Together with a photographic record of the gel pattern, unambiguous identification of immunoreactive proteins from complex mixtures is possible. Some further applications of this work are discussed.

  7. Etodolac Containing Topical Niosomal Gel: Formulation Development and Evaluation

    Directory of Open Access Journals (Sweden)

    Gyati Shilakari Asthana

    2016-01-01

    Full Text Available The present study aimed to investigate the delivery potential of Etodolac (ETD containing topical niosomal gel. Niosomal formulations were prepared by thin film hydration method at various ratios of cholesterol and Span 60 and were evaluated with respect to particle size, shape, entrapment efficiency, and in vitro characteristics. Dicetyl phosphate (DCP was also added in the niosomal formulation. Mean particle size of niosomal formulation was found to be in the range of 2 μm to 4 μm. Niosomal formulation N2 (1 : 1 ratio of cholesterol and surfactant displayed good entrapment efficiency (96.72%. TEM analyses showed that niosomal formulation was spherical in shape. Niosomal formulation (N2 displayed high percentage of drug release after 24 h (94.91 at (1 : 1 ratio of cholesterol : surfactant. Further selected niosomal formulation was used to formulate topical gel and was characterized with respect to its various parameters such as pH, viscosity, spreadability, ex vivo study, and in vivo potential permeation. Ex vivo study showed that niosomal gel possessed better skin permeation study than the plain topical gel. Further in vivo study revealed good inhibition of inflammation in case of topical niosomal gel than plain gel and niosomal formulation. The present study suggested that topical niosomal gel formulations provide sustained and prolonged delivery of drug.

  8. Nonlinear viscoelasticity and generalized failure criterion for biopolymer gels

    Science.gov (United States)

    Divoux, Thibaut; Keshavarz, Bavand; Manneville, Sébastien; McKinley, Gareth

    2016-11-01

    Biopolymer gels display a multiscale microstructure that is responsible for their solid-like properties. Upon external deformation, these soft viscoelastic solids exhibit a generic nonlinear mechanical response characterized by pronounced stress- or strain-stiffening prior to irreversible damage and failure, most often through macroscopic fractures. Here we show on a model acid-induced protein gel that the nonlinear viscoelastic properties of the gel can be described in terms of a 'damping function' which predicts the gel mechanical response quantitatively up to the onset of macroscopic failure. Using a nonlinear integral constitutive equation built upon the experimentally-measured damping function in conjunction with power-law linear viscoelastic response, we derive the form of the stress growth in the gel following the start up of steady shear. We also couple the shear stress response with Bailey's durability criteria for brittle solids in order to predict the critical values of the stress σc and strain γc for failure of the gel, and how they scale with the applied shear rate. This provides a generalized failure criterion for biopolymer gels in a range of different deformation histories. This work was funded by the MIT-France seed fund and by the CNRS PICS-USA scheme (#36939). BK acknowledges financial support from Axalta Coating Systems.

  9. Rubber-like poly(vinyl alcohol) gel

    Energy Technology Data Exchange (ETDEWEB)

    Nambu, Masao (Nippon Oil Co. Ltd., Yokohama (Japan). Central Technical Research Lab.)

    1990-09-01

    Anomalous poly (vinyl alcohol) gel has been found in our laboratory since 1980. The gel is prepared by repeated freezing (or freeze-dehydration) of aqueous poly (vinyl alcohol). Experiments establish the fact that anomalous gel is never produced in the course of freezing, but during sustained thawing the gelation does occur. Moreover, it was found that the softening point of the gel increases at 37degC. It is assumed that crystal nuclei are generated on freezing, then on thawing, some of them grow to very fine crystals which act as polymer network-knots (cross-linking). Additional freezing provide other seeds, which grow similarly, and these are accumulated until rubber-like gel is produced. The gel was always water-resistant at 37degC, and the potassium permanganate consumption of the extracted water layer remained far below the official restricted value for medical materials. The gel can be sterilized with gamma-rays or chlorhexidine. Moreover, it satisfies the official standards of acute toxicity, pyrogen, intracutaneous reaction, hemolyzation, and intracorporeal implantation, respectively. Applications to adhesion-preventing membrane (for joint or pericardium), tamponade (for jaw defects), electrode (for electroretinogram or artificial inner ear), artificial denture base and phantoms for magnetic resonance imaging were examined. (author) 54 refs.

  10. Thermally reversible xyloglucan gels as vehicles for nasal drug delivery.

    Science.gov (United States)

    Mahajan, Hitendra S; Tyagi, Vinod; Lohiya, Gopal; Nerkar, Pankaj

    2012-01-01

    The aim of this study was to investigate the potential application of thermosensitive gels formed by a xyloglucan polysaccharide derived from tamarind seed for nasal drug delivery. Xyloglucan that had been partially degraded by β-galactosidase to eliminate 45% of galactose residues formed gels at concentrations of 2.5% w/w at gelation temperatures decreasing over the range 27-28°C. The in vitro release of ondansetron hydrochloride from the enzyme-degraded xyloglucan gels followed higuchi kinetics over a period of 5 h at 34°C by anomalous transport mechanism. The ex vivo permeation of ondansetron hydrochloride from the gels was sustained. Histological examination of nasal mucosa following a single administration of the gels showed no evidence of mucosal damage. Finally, the bioavailability study in rabbits revealed that the absolute bioavailability of ondansetron hydrochloride was significantly increased from 28.64% in the case of the oral drug solution to 52.79% in the case of the nasal in situ gel. The results of this study suggest the potential of the enzyme-degraded xyloglucan gels as vehicles for nasal delivery of drugs.

  11. Etodolac Containing Topical Niosomal Gel: Formulation Development and Evaluation

    Science.gov (United States)

    Asthana, Abhay; Singh, Davinder; Sharma, Parveen Kumar

    2016-01-01

    The present study aimed to investigate the delivery potential of Etodolac (ETD) containing topical niosomal gel. Niosomal formulations were prepared by thin film hydration method at various ratios of cholesterol and Span 60 and were evaluated with respect to particle size, shape, entrapment efficiency, and in vitro characteristics. Dicetyl phosphate (DCP) was also added in the niosomal formulation. Mean particle size of niosomal formulation was found to be in the range of 2 μm to 4 μm. Niosomal formulation N2 (1 : 1) ratio of cholesterol and surfactant displayed good entrapment efficiency (96.72%). TEM analyses showed that niosomal formulation was spherical in shape. Niosomal formulation (N2) displayed high percentage of drug release after 24 h (94.91) at (1 : 1) ratio of cholesterol : surfactant. Further selected niosomal formulation was used to formulate topical gel and was characterized with respect to its various parameters such as pH, viscosity, spreadability, ex vivo study, and in vivo potential permeation. Ex vivo study showed that niosomal gel possessed better skin permeation study than the plain topical gel. Further in vivo study revealed good inhibition of inflammation in case of topical niosomal gel than plain gel and niosomal formulation. The present study suggested that topical niosomal gel formulations provide sustained and prolonged delivery of drug. PMID:27478643

  12. Fibril formation from pea protein and subsequent gel formation.

    Science.gov (United States)

    Munialo, Claire Darizu; Martin, Anneke H; van der Linden, Erik; de Jongh, Harmen H J

    2014-03-19

    The objective of this study was to characterize fibrillar aggregates made using pea proteins, to assemble formed fibrils into protein-based gels, and to study the rheological behavior of these gels. Micrometer-long fibrillar aggregates were observed after pea protein solutions had been heated for 20 h at pH 2.0. Following heating of pea proteins, it was observed that all of the proteins were hydrolyzed into peptides and that 50% of these peptides were assembled into fibrils. Changes on a structural level in pea proteins were studied using circular dichroism, transmission electron microscopy, and particle size analysis. During the fibril assembly process, an increase in aggregate size was observed, which coincided with an increase in thioflavin T binding, indicating the presence of β-sheet aggregates. Fibrils made using pea proteins were more branched and curly. Gel formation of preformed fibrils was induced by slow acidification from pH 7.0 to a final pH of around pH 5.0. The ability of pea protein-based fibrillar gels to fracture during an amplitude sweep was comparable to those of soy protein and whey protein-based fibrillar gels, although gels prepared from fibrils made using pea protein and soy protein were weaker than those of whey protein. The findings show that fibrils can be prepared from pea protein, which can be incorporated into protein-based fibrillar gels.

  13. The entropically favored osmotic "compression" of sickle cell hemoglobin gels.

    Science.gov (United States)

    Chik, J K; Parsegian, V A

    2001-08-01

    Contrary to the accurate, hard-sphere depiction of monomeric hemoglobin in solution, sickle cell hemoglobin (HbS) polymerization/gelation requires attention to molecular interactions. From the temperature dependence of the osmotic compressibility of HbS gels, we were able to extract the entropy increase for concentrating HbS in this phase. Normalized per mole of water removed, the entropy increase from gel compression DeltaS(gel) is four times the previously measured DeltaS(trans), for the transition from monomeric HbS solution to HbS gel. The positive entropy change cannot emerge from the assembly of hard spheres but can indicate remodeling of HbS fibers driven by release of ordered water. The fourfold difference in DeltaS(gel) and DeltaS(trans) suggests that the act of initial fiber/gel formation from monomeric solution differs from the process of further polymerization due to tighter packing within the gel phase. Copyright 2001 John Wiley & Sons, Inc. Biopolymers 59: 120-124, 2001

  14. Time and frequency dependent rheology of reactive silica gels.

    Science.gov (United States)

    Wang, Miao; Winter, H Henning; Auernhammer, Günter K

    2014-01-01

    In a mixture of sodium silicate and low concentrated sulfuric acid, nano-sized silica particles grow and may aggregate to a system spanning gel network. We studied the influence of the finite solubility of silica at high pH on the mechanical properties of the gel with classical and piezo-rheometers. Direct preparation of the gel sample in the rheometer cell avoided any pre-shear of the gel structure during the filling of the rheometer. The storage modulus of the gel grew logarithmically with time with two distinct growth laws. The system passes the gel point very quickly but still shows relaxation at low frequency, typically below 6 rad/s. We attribute this as a sign of structural rearrangements due to the finite solubility of silica at high pH. The reaction equilibrium between bond formation and dissolution maintains a relatively large bond dissolution rate, which leads to a finite life time of the bonds and behavior similar to physical gels. This interpretation is also compatible with the logarithmic time dependence of the storage modulus. The frequency dependence was more pronounced for lower water concentrations, higher temperatures and shorter reaction times. With two relaxation models (the modified Cole-Cole model and the empirical Baumgaertel-Schausberger-Winter model) we deduced characteristic times from the experimental data. Both models approximately described the data and resulted in similar relaxation times.

  15. Development of mucoadhesive sprayable gellan gum fluid gels.

    Science.gov (United States)

    Mahdi, Mohammed H; Conway, Barbara R; Smith, Alan M

    2015-07-05

    The nasal mucosa provides a potentially good route for local and systemic drug delivery. However, the protective feature of the nasal cavity make intranasal delivery challenging. The application of mucoadhesive polymers in nasal drug delivery systems enhances the retention of the dosage form in the nasal cavity. Several groups have investigated using low acyl gellan as a drug delivery vehicle but only limited research however, has been performed on high acyl gellan for this purpose, despite its properties being more conducive to mucoadhesion. High acyl gellan produces highly elastic gels below 60°C which make it difficult to spray using a mechanical spray device. Therefore, in this study we have tried to address this problem by making fluid gels by introducing a shear force during gelation of the gellan polymer. These fluid gel systems contain gelled micro-particles suspended in a solution of un-gelled polymer. These systems can therefore behave as pourable viscoelastic fluids. In this study we have investigated the rheological behavior and mucoadhesion of fluid gels of two different types of gellan (high and low acyl) and fluid gels prepared from blends of high and low acyl gellan at a 50:50 ratio. The results demonstrated that by preparing fluid gels of high acyl gellan, the rheological properties were sufficient to spray through a standard nasal spray device. Moreover fluid gels also significantly enhance both high acyl and low acyl gellan mucoadhesion properties.

  16. Gellan gum fluid gels for topical administration of diclofenac.

    Science.gov (United States)

    Mahdi, Mohammed H; Conway, Barbara R; Mills, Thomas; Smith, Alan M

    2016-12-30

    Diclofenac topical formulations are often preferred for drug administration to patients who experience serious GIT problems. Absorption of the drug through the skin, however, can be challenging due to the natural protective feature of the stratum corneum (SC). In this article, fluid gels prepared from gellan gum were explored as a topical drug delivery vehicle. Rheological analysis of the formulations showed that it was possible to produce a topical gel with a viscosity and the mechanical strength similar to that of the commercially available Voltaren(®) gel using 1% w/w of a 50:50 low acyl/high acyl (LA/HA) gellan blend. Soft-tribology was used to assess the lubrication properties of gellan fluid gels. The lubrication of the gellan gum fluid gel formulations at high rubbing speeds was similar to the lubrication of the Voltaren(®) gel. The use of gellan gum dramatically increased skin permeation of diclofenac when compared with the commercially available formulation and could be controlled by changing the gellan gum concentration and/or sodium ion concentration in the formulation. This study highlights the potential use of fluid gels that can be easily tuned to have physical properties suitable for topical formulations with the added advantage of increasing drug permeation.

  17. Alcohol hand gel--a potential fire hazard.

    Science.gov (United States)

    O'Leary, Fionnuala M; Price, Gareth J

    2011-01-01

    Alcohol hand gel and wipes are the common method of disinfecting the hands of healthcare workers and working surfaces in clinical settings. We present a case of a 40-year-old health care support worker who was referred acutely to our burns unit following flame burns in association with alcohol gel use. Fortunately she was able to extinguish the flames without sustaining a significant thermal injury however this case highlights the potential danger associated with alcohol gel use, especially with smokers. With the ever increasing use of alcohol hand gel, not only in healthcare settings but also in the general population there needs to be clearer warnings regarding the potential for ignition after use. Alcohol hand gel and wipes are the common method of disinfecting the hands of healthcare workers and working surfaces in clinical settings. Most trusts have strict policies regarding mandatory sanitisation of hands before and after patient contact. This is most easily achieved by the use of alcohol gel due to its ease of use and quick drying properties. As a result alcohol hand disinfectant is available is a variety of formats including foam, gel and wipes. It is also now widely available for use to the general public.

  18. Mechanism of Concentration Dependence of Water Diffusivity in Polyacrylate Gels

    Science.gov (United States)

    Mani, Sriramvignesh; Khabaz, Fardin; Khare, Rajesh

    Membrane based separation processes offer an energy efficient alternative to traditional distillation based separation processes. In this work, we focus on the molecular mechanisms underlying the process of separation of dilute ethanol-water mixture using polyacrylate gels as pervaporation membranes. The diffusivities of the components in swollen gels exhibit concentration dependence. We have used molecular dynamics (MD) simulations to study the correlation between the dynamics of solvent (water and ethanol) molecules, polymer dynamics and solvent structure in the swollen gel systems as a function of solvent concentration. Three different polyacrylate gels were studied: (1) poly n-butyl acrylate (PBA), (2) copolymer of butyl acrylate and 2-hydroxyethyl acrylate P(BA50-HEA50), and (3) poly 2-hydroxyethyl acrylate (PHEA). Simulation results show that solvent concentration has a significant effect on local structure of the solvent molecules and chain dynamics; these factors (local structure and chain dynamics), in turn, affect the diffusivity of these molecules. At low concentration, solvent molecules are well dispersed in the gel matrix and form hydrogen bonds with the polymer. Solvent mobility is correlated with polymer mobility in this configuration and consequently water and ethanol molecules exhibit slower dynamics, this effect is especially significant in PHEA gel. At high solvent concentration, water molecules form large clusters in the system accompanied by enhancement in mobility of both the gel network and the solvent molecules.

  19. The Use of Topical Lidocaine Gel During Intermaxillary Fixation Procedure.

    Science.gov (United States)

    Jeong, Yeon Jin; Kim, Ho Jun; Kwon, Ho; Shim, Hyung-Sup; Seo, Bommie Florence; Jung, Sung-No

    2016-07-01

    This study aimed to validate the usefulness of lidocaine gel during intermaxillary fixation using arch bars in patients with mandible fracture by comparing 2 patient groups: one group using lidocaine gel in intermaxillary fixation and the other group undergoing traditional local infiltration.Subjects were patients with mandible fracture undergoing intermaxillary fixation using arch bars from March 2003 to February 2007. Twenty-three patients were anesthetized in the upper and lower gingiva by 2% local lidocaine solution injection; another 23 underwent topical anesthesia with 2% lidocaine hydrochloride gel applied to the upper and lower gingiva. The convenience of fixation was measured in terms of operation time and degree of pain according to the visual analog scale; arch bar loosening rate was assessed postoperatively.The mean operation times were 63 and 47 minutes in the groups undergoing local infiltration and using topical lidocaine gel, respectively. For pain degree according to the visual analog scale, the mean scores were 6.4 and 3.2 in the groups using local infiltration and topical lidocaine gel, respectively. When the arch bar loosening rate was measured postoperatively, the 2 groups differed significantly, with a rate of 26% in the group using local infiltration and 13% in the group using topical lidocaine gel.Application of topical lidocaine gel during intermaxillary fixation using arch bars in patients with mandible fracture relieves pain and offers convenience in performing the procedure. It can be a useful alternative method for patients who are sensitive to pain or have needle phobia.

  20. Nanostructure of gel-derived aluminosilicate materials.

    Science.gov (United States)

    Sinkó, Katalin; Hüsing, Nicola; Goerigk, Günter; Peterlik, Herwig

    2008-02-01

    In the present work, aluminosilicate aerogels prepared under various conditions were compared with respect to their nanostructures and porosity. The purpose of this investigation was to find a suitable way to predict the final product structure and to tailor a required texture. Several Al and Si precursors (Al nitrate, Al isopropoxide, Al acetate, tetraethoxysilane (TEOS), and sodium silicate) were used in our examinations; the solvent content (water and alcohols), surfactants, as well as the catalysts were varied. In addition, the aerogels were subjected to various heat treatments. Hybrid aerogels were synthesized by the addition of different polymers (poly(acrylic acid), polyvinyl acetate, and polydimethylsiloxane). Aluminosilicate and hybrid aerogel structures were investigated by 27Al MAS NMR, SAXS, SEM, and porosity measurements. Loose fractal structures with a good porosity and high Al incorporation can be achieved from TEOS and Al nitrate or isopropoxide via a sol-gel preparation route. The use of Al acetate led to compact aerogel structures independently of the Si precursor, the pH, and the catalyst.

  1. Oil Gels Based on Styrene Butadiene Rubber

    Institute of Scientific and Technical Information of China (English)

    ZHOU Mei-hua (周美华); XU Jing-bo(徐静波); Won-jei CHO

    2004-01-01

    Four oil absorbents based on styrene butadiene (SBR),i. e., pure SBR (PS), 4- tert-butylstyrene-SBR (PBS),EPDM-SBR network (PES) and 4-tert-butylstyrene-EPDMSBR ( PBES ), were produced from crosslinking polymerization of uncured styrene butadiene rubber (SBR),4- tert-butylstyrene ( tBS ) and ethylene-propylene-diene terpolymer (EPDM). The reaction took place in toluene using benzoyl peroxide (BPO) as an initiator. Uncured SBR was used as both a pre-polymer and a crosslink agent in this work, and the crosslinked polymer was identified by IR spectroscopy. The oil absorbency of the crosslinked polymer was evaluated with the method ASTM (F726 - 81). The order of maximum oil absorbency was PBES > PBS >PES > PS. The maximum values of oil absorbency of PBES and PBS were 74.0g/g and 69.5g/g, respectively. Gel fractions and swelling kinetic constants, however, had the opposite sequences. The swelling kinetic constant of PS evaluated by an experimental equation was 49. 97 ×10-2h-1.

  2. Drying and shrinkage of polymer gels

    Directory of Open Access Journals (Sweden)

    S. S. Waje

    2005-06-01

    Full Text Available The polymer hydrogel was synthesized by photo-polymerization process (UV light, 60 ºC in presence of Photo-initiator (IrgacureR and Cross-linker (NN'-methylene bisacrylamide; MBAM. In the present work, the drying of polymer hydrogel was carried out to study the effect of temperature, gel-sheet thickness, monomer ratio of acryl acid to acrylamide (AA/AM, concentration of MBAM and quantity of monomers. A correlation has been developed for modified sheet thickness as a function of contraction coefficient and degree of drying. Effective diffusivity was estimated from Fickian-diffusive model considering modified sheet thickness and was found to be in the range of 1.1 ´ 10-10-5.93 ´ 10-10 m²/s. The activation energy obtained using Arrhenius type equation was found to be in the range of 2979-10737 kJ/kmol H2O. The drying behavior shows an initial shoot-up in drying rate followed by constant rate and two falling rate periods.

  3. Characterizing matrix remodeling in collagen gels using optical coherence tomography

    Science.gov (United States)

    Levitz, David; Hinds, Monica T.; Hanson, Stephen R.; Jacques, Steven L.

    2010-02-01

    Optical coherence tomography (OCT) has shown promise at non-destructively characterizing engineered tissues such as collagen gels. However, as the collagen gels develop, the OCT images lose contrast of structures as the gels develop, making visual assessment difficult. Our group proposed quantitatively characterizing these gels by fitting the optical properties from the OCT signals. In this paper, we imaged collagen gels seeded with smooth muscle cells (SMCs) over a 5-day period and used the data to measure their optical properties. Our results showed that over time, the reflectivity of the samples increased 10-fold, corresponding to a decrease in anisotropy factor g, without much change in the scattering coefficient μs. Overall, the optical properties appeared to be dominated by scattering from the collagen matrix, not the cells. However, SMCs remodeled the collagen matrix, and this collagen remodeling by the cells is what causes the observed changes in optical properties. Moreover, the data showed that the optical properties were sensitive to the activity of matrix metalloproteinases (MMPs), enzymes that break down local collagen fibrils into smaller fragments. Blocking MMPs in the SMC gels greatly impeded both the remodeling process and change in optical properties at day 5. Treating day 1 acellular gels with MMP-8 for 3 hr managed to partially reproduce the remodeling observed in SMC gels at day 5. Altogether, we conclude that matrix remodeling in general, and MMPs specifically, greatly affect the local optical properties of the sample, and OCT is a unique tool that can assess MMP activity in collagen gels both non-destructively and label free.

  4. SPI Conformance Gel Applications in Geothermal Zonal Isolation

    Energy Technology Data Exchange (ETDEWEB)

    Burns, Lyle [Clean Tech Innovations, Bartlesville, OK (United States)

    2017-08-08

    Zonal isolation in geothermal injection and producing wells is important while drilling the wells when highly fractured geothermal zones are encountered and there is a need to keep the fluids from interfering with the drilling operation. Department of Energy’s (DOE) Energy Efficiency and Renewable Energy (EERE) objectives are to advance technologies to make it more cost effective to develop, produce, and monitor geothermal reservoirs and produce geothermal energy. Thus, zonal isolation is critical to well cost, reservoir evaluation and operations. Traditional cementing off of the lost circulation or thief zones during drilling is often done to stem the drilling mud losses. This is an expensive and generally unsuccessful technique losing the potential of the remaining fracture system. Selective placement of strong SPI gels into only the offending fractures can maintain and even improve operational efficiency and resource life. The SPI gel system is a unique silicate based gel system that offers a promising solution to thief zones and conformance problems with water and CO2 floods and potentially geothermal operations. This gel system remains a low viscosity fluid until an initiator (either internal such as an additive or external such as CO2) triggers gelation. This is a clear improvement over current mechanical methods of using packers, plugs, liners and cementing technologies that often severely damage the highly fractured area that is isolated. In the SPI gels, the initiator sets up the fluid into a water-like (not a precipitate) gel and when the isolated zone needs to be reopened, the SPI gel may be removed with an alkaline solution without formation damage occurring. In addition, the SPI gel in commercial quantities is expected to be less expensive than competing mechanical systems and has unique deep placement possibilities. This project seeks to improve upon the SPI gel integrity by modifying the various components to impart temperature stability for use in

  5. A gel electrophoresis loading system to prevent laboratory contamination by amplification products.

    Science.gov (United States)

    Adey, Nils B; Emery, Dale B; Bosh, Derek D; Parry, Robert J

    2014-10-01

    Pipet tip loading of polymerase chain reaction (PCR) and other amplification products into an electrophoresis gel represents a potential source of laboratory contamination. We have developed a prototype of the gel contamination control system (GelCCS) that enables gel loading by bottom puncture of PCR tubes. Puncture occurs within a sealed gel casing, preventing contamination of the surrounding environment. The system was designed for inexpensive manufacture so that after the results are visualized, the gel casing and PCR tubes are discarded intact with the amplification products sealed inside. We demonstrate that gel loading is reliable and that the resulting bands are equivalent in appearance to manually loaded gels.

  6. Orientation of the agarose gel matrix in pulsed electric fields.

    OpenAIRE

    Stellwagen, J; Stellwagen, N C

    1989-01-01

    The technique of transient electric birefringence was used to investigate the effect of pulsed electric fields on the orientation of the agarose gel matrix. Orientation of the gel was observed at all electric field strengths. Very slow, time-dependent effects were observed when pulses of 10-100 V/cm were applied to 1% gels for 0.5-2 seconds, indicating that domains of the matrix were being oriented by the electric field. The sign of the birefringence reversed when the direction of the applied...

  7. PMMA-based Gel Polymer Electrolytes with Crosslinking Network

    Institute of Scientific and Technical Information of China (English)

    H.P. Zhang; Y. P. Wu; H. Q. Wu; M. Sun

    2005-01-01

    @@ 1Introduction The lithium-ion battery has a good rate capability and low-temperature performance, but its safety is relatively low due to the possibility of leakage of liquid electrolyte. The use of a solid or gel type electrolyte can lower the probability of leakage liquid electrolyte, and the electrochemical performance of gel electrolyte doesn't decrease so markedly as the solid electrolyte. Now, new types of advanced lithium-ion battery with gel polymer electrolytes are under developing which can be used in the future.

  8. Gel phase formation in dilute triblock copolyelectrolyte complexes

    Science.gov (United States)

    Srivastava, Samanvaya; Andreev, Marat; Levi, Adam E.; Goldfeld, David J.; Mao, Jun; Heller, William T.; Prabhu, Vivek M.; de Pablo, Juan J.; Tirrell, Matthew V.

    2017-02-01

    Assembly of oppositely charged triblock copolyelectrolytes into phase-separated gels at low polymer concentrations (formation of a dilute phase of individual micelles is prevented in polyelectrolyte complexation-driven assembly of triblock copolyelectrolytes. Gel phases form and phase separate almost instantaneously on solvation of the copolymers. Furthermore, molecular models of self-assembly demonstrate the presence of oligo-chain aggregates in early stages of copolyelectrolyte assembly, at experimentally unobservable polymer concentrations. Our discoveries contribute to the fundamental understanding of the structure and pathways of complexation-driven assemblies, and raise intriguing prospects for gel formation at extraordinarily low concentrations, with applications in tissue engineering, agriculture, water purification and theranostics.

  9. Actin purification from a gel of rat brain extracts.

    Science.gov (United States)

    Levilliers, N; Peron-Renner, M; Coffe, G; Pudles, J

    1984-01-01

    Actin, 99% pure, has been recovered from rat brain with a high yield (greater than 15 mg/100 g brain). We have shown that: 1. a low ionic strength extract from rat brain tissue is capable of giving rise to a gel; 2. actin is the main gel component and its proportion is one order of magnitude higher than in the original extract; 3. actin can be isolated from this extract by a three-step procedure involving gelation, dissociation of the gel in 0.6 M KCl, followed by one or two depolymerization-polymerization cycles.

  10. COMPARATIVE STUDIES ON POVIDONE-IODINE OINTMENT AND GEL

    Directory of Open Access Journals (Sweden)

    T. Mangilal*, K. S. K. Rao Patnaik , R. Sivakumar , Y. Sudhakar and S. K. Basu

    2012-11-01

    Full Text Available Povidone-Iodine Ointment was prepared using polyethylene glycol base by fusion method and the gel was prepared using Poloxamer 407 as a gelling agent by cold process. The different characteristics of povidone-iodine ointment and gel were compared from the results obtained for assay and total, available and complex iodine contents. These values were comparable with marketed formulations. The formulations were tested for wound healing and antimicrobial activity. Wound healing studies show that the time taken for complete wound healing was slightly less for prepared povidone-iodine ointment and gel than the marketed preparations. Antimicrobial activity also found to be almost equal for the different formulations.

  11. Sol-gel processing with inorganic metal salt precursors

    Science.gov (United States)

    Hu, Zhong-Cheng

    2004-10-19

    Methods for sol-gel processing that generally involve mixing together an inorganic metal salt, water, and a water miscible alcohol or other organic solvent, at room temperature with a macromolecular dispersant material, such as hydroxypropyl cellulose (HPC) added. The resulting homogenous solution is incubated at a desired temperature and time to result in a desired product. The methods enable production of high quality sols and gels at lower temperatures than standard methods. The methods enable production of nanosize sols from inorganic metal salts. The methods offer sol-gel processing from inorganic metal salts.

  12. Strain identification in Rhizobium by starch gel electrophoresis of isoenzymes

    DEFF Research Database (Denmark)

    Engvild, Kjeld Christensen; Nielsen, G.

    1985-01-01

    Sonieated extracts of rhizobia, especiaUy Rhizobium leguminosarum from pea and vetch, were run in horizontal starch gel electrophoresis in the cold. The rhizobia were grown on agar on a slime suppressing substrate of tryptone-yeast extract-CaCl2 with small amounts of mannitol, sorbitol...... and arabinose and other sugars as enzyme inducers. After electrophoresis the gels were separated into several slabs by a gel cutter. Each slab was stained for a particular enzyme. Among numerous enzyme systems tested we found useful variation in esterases (EC 3.1.1.1, EC 3.1.1.2), 3-hydroxybutyrate...

  13. Tensile Properties of Poly (N-vinyl caprolactam) Gels

    Science.gov (United States)

    Morgret, Leslie D.; Hinkley, Jeffrey A.

    2004-01-01

    N-vinyl caprolactam was copolymerized with ethylene glycol dimethacrylate using a free-radical initiator in alcohol/water solution. The resulting gels were thermally-responsive in water, undergoing an approximate fivefold reversible volume shrinkage between room temperature and ca. 50 C. Tensile testing showed that the stress-strain behavior was qualitatively different in the collapsed state above the temperature-induced transition. At the higher temperature, gels were stiffer, more ductile, and showed greater time dependence. Implications for the design of gel actuators are briefly discussed.

  14. Hierarchically Structured Monolithic ZSM-5 through Macroporous Silica Gel Zeolitization

    Institute of Scientific and Technical Information of China (English)

    Lei Qian; Zhao Tianbo; Li Fengyan; Zong Baoning; Tong Yangchuan

    2006-01-01

    The hierarchically structured ZSM-5 monolith was prepared through transforming the skeletons of the macroporous silica gel into ZSM-5 by the steam-assisted conversion method. The morphology and monolithic shapes of macroporous silica gel were well preserved. The hierarchically structured ZSM-5 monolith exhibited the hierarchical porosity, with mesopores and macropores existing inside the macroporous silica gel, and micropores formed by the ZSM-5. The products have been characterized properly by using the XRD, SEM and N2 adsorption-desorption methods.

  15. Integration of gel-based and gel-free proteomic data for functional analysis of proteins through Soybean Proteome Database

    KAUST Repository

    Komatsu, Setsuko

    2017-05-10

    The Soybean Proteome Database (SPD) stores data on soybean proteins obtained with gel-based and gel-free proteomic techniques. The database was constructed to provide information on proteins for functional analyses. The majority of the data is focused on soybean (Glycine max ‘Enrei’). The growth and yield of soybean are strongly affected by environmental stresses such as flooding. The database was originally constructed using data on soybean proteins separated by two-dimensional polyacrylamide gel electrophoresis, which is a gel-based proteomic technique. Since 2015, the database has been expanded to incorporate data obtained by label-free mass spectrometry-based quantitative proteomics, which is a gel-free proteomic technique. Here, the portions of the database consisting of gel-free proteomic data are described. The gel-free proteomic database contains 39,212 proteins identified in 63 sample sets, such as temporal and organ-specific samples of soybean plants grown under flooding stress or non-stressed conditions. In addition, data on organellar proteins identified in mitochondria, nuclei, and endoplasmic reticulum are stored. Furthermore, the database integrates multiple omics data such as genomics, transcriptomics, metabolomics, and proteomics. The SPD database is accessible at http://proteome.dc.affrc.go.jp/Soybean/. Biological significanceThe Soybean Proteome Database stores data obtained from both gel-based and gel-free proteomic techniques. The gel-free proteomic database comprises 39,212 proteins identified in 63 sample sets, such as different organs of soybean plants grown under flooding stress or non-stressed conditions in a time-dependent manner. In addition, organellar proteins identified in mitochondria, nuclei, and endoplasmic reticulum are stored in the gel-free proteomics database. A total of 44,704 proteins, including 5490 proteins identified using a gel-based proteomic technique, are stored in the SPD. It accounts for approximately 80% of all

  16. Gamma/neutron dose evaluation using Fricke gel and alanine gel dosimeters to be applied in boron neutron capture therapy.

    Science.gov (United States)

    Mangueira, T F; Silva, C F; Coelho, P R P; Campos, L L

    2010-01-01

    Gel dosimetry has been studied mainly for medical applications. The radiation induced ferric ions concentration can be measured by different techniques to be related with the absorbed dose. Aiming to assess gamma/thermal neutrons dose from research reactors, Fricke gel and alanine gel solutions produced at IPEN using 300 bloom gelatin were mixed with Na(2)B(4)O(7) salt, and the mixtures were irradiated at the beam hole #3 of the IEA-R1 research reactor, (BH#3) adapted to BNCT studies, and the dose-response was evaluated using spectrophotometry technique.

  17. Integration of gel-based and gel-free proteomic data for functional analysis of proteins through Soybean Proteome Database.

    Science.gov (United States)

    Komatsu, Setsuko; Wang, Xin; Yin, Xiaojian; Nanjo, Yohei; Ohyanagi, Hajime; Sakata, Katsumi

    2017-06-23

    The Soybean Proteome Database (SPD) stores data on soybean proteins obtained with gel-based and gel-free proteomic techniques. The database was constructed to provide information on proteins for functional analyses. The majority of the data is focused on soybean (Glycine max 'Enrei'). The growth and yield of soybean are strongly affected by environmental stresses such as flooding. The database was originally constructed using data on soybean proteins separated by two-dimensional polyacrylamide gel electrophoresis, which is a gel-based proteomic technique. Since 2015, the database has been expanded to incorporate data obtained by label-free mass spectrometry-based quantitative proteomics, which is a gel-free proteomic technique. Here, the portions of the database consisting of gel-free proteomic data are described. The gel-free proteomic database contains 39,212 proteins identified in 63 sample sets, such as temporal and organ-specific samples of soybean plants grown under flooding stress or non-stressed conditions. In addition, data on organellar proteins identified in mitochondria, nuclei, and endoplasmic reticulum are stored. Furthermore, the database integrates multiple omics data such as genomics, transcriptomics, metabolomics, and proteomics. The SPD database is accessible at http://proteome.dc.affrc.go.jp/Soybean/. The Soybean Proteome Database stores data obtained from both gel-based and gel-free proteomic techniques. The gel-free proteomic database comprises 39,212 proteins identified in 63 sample sets, such as different organs of soybean plants grown under flooding stress or non-stressed conditions in a time-dependent manner. In addition, organellar proteins identified in mitochondria, nuclei, and endoplasmic reticulum are stored in the gel-free proteomics database. A total of 44,704 proteins, including 5490 proteins identified using a gel-based proteomic technique, are stored in the SPD. It accounts for approximately 80% of all predicted proteins from

  18. Use of vaginal prostaglandin gel before induction of labour.

    Science.gov (United States)

    Murphy, A J; Jalland, M; Pepperell, R J; Quinn, M A

    1980-05-01

    Tylose gel containing either 1.5 mg, 3.0 mg or 10.0 mg of prostaglandin F2 alpha was inserted into the posterior vaginal fornix of 165 patients on the evening before induction of labour. A control group of 100 patients received the gel alone. There was a significant reduction in the induction-delivery interval in nulliparae receiving at least 3.0 mg of prostaglandin, whereas, in multiparae all doses achieved this effect. There was also a significant reduction in the incidence of forceps delivery in nulliparae who received 3.0 mg or more of the prostaglandin gel; however, there was no difference in the incidence of spontneous labour, epidural anaesthesia or Caesarean section between the patients who received prostaglandin or those receiving gel alone.

  19. Superabsorbing gel for actinide, lanthanide, and fission product decontamination

    Science.gov (United States)

    Kaminski, Michael D.; Mertz, Carol J.

    2016-06-07

    The present invention provides an aqueous gel composition for removing actinide ions, lanthanide ions, fission product ions, or a combination thereof from a porous surface contaminated therewith. The composition comprises a polymer mixture comprising a gel forming cross-linked polymer and a linear polymer. The linear polymer is present at a concentration that is less than the concentration of the cross-linked polymer. The polymer mixture is at least about 95% hydrated with an aqueous solution comprising about 0.1 to about 3 percent by weight (wt %) of a multi-dentate organic acid chelating agent, and about 0.02 to about 0.6 molar (M) carbonate salt, to form a gel. When applied to a porous surface contaminated with actinide ions, lanthanide ions, and/or other fission product ions, the aqueous gel absorbs contaminating ions from the surface.

  20. Complement monitoring of Pluronic 127 gel and micelles

    DEFF Research Database (Denmark)

    Hamad, Islam; Hunter, A Christy; Moghimi, Seyed Moien

    2013-01-01

    Poloxamer 407 is a non-ionic polyethylene oxide (PEO)/polypropylene oxide (PPO) block copolymer, which exhibits reversible thermogelation properties. Poloxamer gel has attracted many applications for controlled release of therapeutic agents as well as in surgical interventions such as controlled...... vascular occlusion. We show that poloxamer gel can trigger the complement system, which is an integral part of innate immunity and its inadvertent activation can induce clinically significant anaphylaxis. Complement activation by the poloxamer gel is through the alternative pathway, but material...... transformations from gel to the solution state further incite complement through calcium-sensitive pathways, where a role for C1q and antibodies has been eliminated. Poloxamer addition to plasma/serum (at levels above its critical micelle concentration, cmc) induced formation of large and diffused structures...

  1. Strain identification in Rhizobium by starch gel electrophoresis of isoenzymes

    DEFF Research Database (Denmark)

    Engvild, Kjeld Christensen; Nielsen, G.

    1985-01-01

    Sonieated extracts of rhizobia, especiaUy Rhizobium leguminosarum from pea and vetch, were run in horizontal starch gel electrophoresis in the cold. The rhizobia were grown on agar on a slime suppressing substrate of tryptone-yeast extract-CaCl2 with small amounts of mannitol, sorbitol and arabin......Sonieated extracts of rhizobia, especiaUy Rhizobium leguminosarum from pea and vetch, were run in horizontal starch gel electrophoresis in the cold. The rhizobia were grown on agar on a slime suppressing substrate of tryptone-yeast extract-CaCl2 with small amounts of mannitol, sorbitol...... and arabinose and other sugars as enzyme inducers. After electrophoresis the gels were separated into several slabs by a gel cutter. Each slab was stained for a particular enzyme. Among numerous enzyme systems tested we found useful variation in esterases (EC 3.1.1.1, EC 3.1.1.2), 3-hydroxybutyrate...

  2. Analysis of Two-Dimensional Electrophoresis Gel Images

    DEFF Research Database (Denmark)

    Pedersen, Lars

    2002-01-01

    This thesis describes and proposes solutions to some of the currently most important problems in pattern recognition and image analysis of two-dimensional gel electrophoresis (2DGE) images. 2DGE is the leading technique to separate individual proteins in biological samples with many biological...... the methods developed in the literature specifically for matching protein spot patterns, the focus is on a method based on neighbourhood relations. These methods are applied to a range of 2DGE protein spot data in a comparative study. The point pattern matching requires segmentation of the gel images...... and since the correct image segmentation can be difficult, a new alternative approach, exploiting prior knowledge from a reference gel about the protein locations to segment an incoming gel image, is proposed....

  3. Optical detection of parasitic protozoa in sol-gel matrices

    Science.gov (United States)

    Livage, Jacques; Barreau, J. Y.; Da Costa, J. M.; Desportes, I.

    1994-10-01

    Whole cell parasitic protozoa have been entrapped within sol-gel porous silica matrices. Stationary phase promastigote cells of Leishmania donovani infantum are mixed with a silica sol before gelation occurs. They remain trapped within the growing oxide network and their cellular organization appears to be well preserved. Moreover protozoa retain their antigenic properties in the porous gel. They are still able to detect parasite specific antibodies in serum samples from infected patients via an enzyme linked immunosorbent assay (ELISA). Antigen- antibody associations occurring in the gel are optically detected via the reactions of a peroxidase conjugate with ortho-phenylenediamine leading to the formation of a yellow coloration. A clear-cut difference in optical density is measured between positive and negative sera. Such an entrapment of antigenic species into porous sol-gel matrices avoids the main problems due to non specific binding and could be advantageously used in diagnostic kits.

  4. Magneto-dependent stress relaxation of magnetorheological gels

    KAUST Repository

    Xu, Yangguang

    2017-09-01

    The stress relaxation behaviors of magnetorheological (MR) gels under stepwise shear loading are systematically investigated. The particle-enhanced effect, the magneto-induced effect, and the temperature-enhanced effect on the stress relaxation of MR gels are discussed. For further analysis of the magneto-induced stress relaxation mechanism in MR gels, a phenomenological model is established to describe the stress relaxation behavior of the matrix and the magnetic particle chains. All characteristic parameters introduced in the model, i.e. relaxation time, instantaneous modulus, and stable modulus, have well-defined physical meanings and are fitted based on the experimental results. The influence of each parameter on the macroscopic response is discussed and it is found that the relaxation stress induced by the magneto-mechanical coupling effect plays an important role in the stress relaxation process of MR gels.

  5. Morphology of Low Density Foams from Crystalline Gels.

    Science.gov (United States)

    Beaucage, G.; Schaefer, D. W.; Lagasse, R. R.; Aubert, J. A.; Ehrlich, P.; Stein, R. S.; Whaley, P.; Kulkarni, S.

    1996-03-01

    Low-density polymer foams are often derived via supercritical extraction of crystalline gels. The nano-structural basis of these foams and gels, in a wide variety of systems, is distorted lamellae. We present an uncorrelated lamellar model which describes the small-angle scattering over 5 orders of size in these systems. Our approach is based on the unified approach to small-angle scattering and scattering data from 4 instruments. This approach is equally applicable to olefin foams from gelation in supercritical propane (Whaley, Kulkarni, Stein, Ehrlich), polyacrylonitrile foams and gels from DMF/ethylene glycol followed by supercritical extraction in CO2 (Lagasse) and isotactic PS foams and gels from decalin and extracted in supercritical CO2 (Aubert). Distortion of conventional crystalline morphologies can be rationalized in terms of the extent of entanglement of the polymer chains during crystallization and the deformability of lamellar platelets during supercritical drying. Correlations between melt and dilute solution morphologies are given.

  6. Developmental Studies on Metallised UDMH and Kerosene Gels

    National Research Council Canada - National Science Library

    T. L. Varghese; S. C. Gaindhar; John David; Josekutty Jose; R. M. Muthiah; S. S. Rao; K. N. Ninan; V. N. Krishnamurthy

    1995-01-01

    ...) and kerosene containing 30 per cent 15 micron Aluminium was studied. Metallised UDMH and kerosene gels were characterised with respect to pseudoplasticity, thixotropy, consistency and yield stress using Contrave's rheometer...

  7. Sol-Gel/Hydrothermal Synthesis of Mixed Metal Oxide

    African Journals Online (AJOL)

    Mixed metal oxides of titanium and zinc nanocomposites were prepared through sol-gel method under hydrothermal ... the production of TiO -ZnO nanoparticles use. 2 either titanium ... involved using titanium sulphate and thioacetamide for ...

  8. Properties of nucleic acid staining dyes used in gel electrophoresis.

    Science.gov (United States)

    Haines, Alicia M; Tobe, Shanan S; Kobus, Hilton J; Linacre, Adrian

    2015-03-01

    Nucleic acid staining dyes are used for detecting nucleic acids in electrophoresis gels. Historically, the most common dye used for gel staining is ethidium bromide, however due to its toxicity and mutagenicity other dyes that are safer to the user and the environment are preferred. This Short Communication details the properties of dyes now available and their sensitivity for detection of DNA and their ability to permeate the cell membrane. It was found that GelRed™ was the most sensitive and safest dye to use with UV light excitation, and both GelGreen™ and Diamond™ Nucleic Acid Dye were sensitive and the safer dyes using blue light excitation. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  9. Using Gel Electrophoresis To Illustrate Protein Diversity and Isoelectric Point.

    Science.gov (United States)

    Browning, Mark; Vanable, Joseph

    2002-01-01

    Demonstrates the differences in protein structures by focusing on isoelectric point with an experiment that is observable under certain pH levels in gel electrophoresis. Explains the electrophoresis procedure and reports results of the experiments. (YDS)

  10. DNA gel electrophoresis: the reptation model(s).

    Science.gov (United States)

    Slater, Gary W

    2009-06-01

    DNA gel electrophoresis has been the most important experimental tool to separate DNA fragments for several decades. The introduction of PFGE in the 1980s and capillary gel electrophoresis in the 1990s made it possible to study, map and sequence entire genomes. Explaining how very large DNA molecules move in a gel and why PFGE is needed to separate them has been an active field of research ever since the launch of the journal Electrophoresis. This article presents a personal and historical overview of the development of the theory of gel electrophoresis, focusing on the reptation model, the band broadening mechanisms, and finally the factors that limit the read length and the resolution of electrophoresis-based sequencing systems. I conclude with a short discussion of some of the questions that remain unanswered.

  11. 2D gels still have a niche in proteomics

    DEFF Research Database (Denmark)

    Rogowska-Wrzesinska, Adelina; Le Bihan, Marie-Catherine; Thaysen-Andersen, Morten;

    2013-01-01

    ) alternative detection methods for modification specific proteomics; 3) identification of protein isoforms and modified proteins. With an example of the glycoprotein TIMP-1 protein we illustrate the unique properties of 2D gels for the separation and characterisation of multiply modified proteins. We also show......With the rapid advance of MS-based proteomics one might think that 2D gel-based proteomics is dead. This is far from the truth. Current research has shown that there are still a number of places in the field of protein and molecular biology where 2D gels still play a leading role. The aim...... of this review is to highlight some of these applications. Examples from our own research as well as from other published works are used to illustrate the 2D gel driven research in the areas of: 1) de novo sequencing and protein identification from organisms with no or incomplete genome sequences available; 2...

  12. Stiffness control of magnetorheological gels for adaptive tunable vibration absorber

    Science.gov (United States)

    Kim, Hyun Kee; Kim, Hye Shin; Kim, Young-Keun

    2017-01-01

    In this study, a stiffness feedback control system for magnetorheological (MR) gel—a smart material of variable stiffness—is proposed, toward the design of a tunable vibration absorber that can adaptively tune to a time varying disturbance in real time. A PID controller was designed to track the required stiffness of the MR gel by controlling the magnitude of the target external magnetic field pervading the MR gel. This paper proposes a novel magnetic field generator that could produce a variable magnetic field with low energy consumption. The performance of the MR gel stiffness control was validated through experiments that showed the MR gel absorber system could be automatically tuned from 56 Hz to 67 Hz under a field of 100 mT to minimize the vibration of the primary system.

  13. Investigations of rheological properties of diclofenac sodium gel preparation

    Directory of Open Access Journals (Sweden)

    Firuza Maksudova

    2013-04-01

    Full Text Available It is well-known that the majority of non-steroidal anti-inflammatory drugs (NSAIDs are ulcerogenic. Gel or ointment preparations of NSAIDs are free from this side-effect, which is a prerequisite for the increase of aforementioned forms of NSAIDs. A major quality indicator of gels and ointments are rheological properties. Along with determining the quality of preparation, they influence manufacturing, expiration date and terms of storage. This article demonstrates the results of investigation of rheological indices of 3% gel preparation of diclofenac sodium such as plasticity, structural viscosity, and thixotropy. Obtained results confirm that the developed gel preparation has thixotropy, plasticity and is classified as a Bingham system.

  14. Synchrotron radiation for direct analysis of metalloproteins on electrophoresis gels.

    Science.gov (United States)

    Ortega, Richard

    2009-03-01

    Metalloproteomics requires analytical techniques able to assess and quantify the inorganic species in metalloproteins. The most widely used methods are hyphenated techniques, based on the coupling of a high resolution chromatographic method with a high sensitivity method for metal analysis in solution. An alternative approach is the use of methods for solid sample analysis, combining metalloprotein separation by gel electrophoresis and direct analysis of the gels. Direct methods are based on beam analysis, such as lasers, ion beams or synchrotron radiation beams. The aim of this review article is to present the main features of synchrotron radiation based methods and their applications for metalloprotein analysis directly on electrophoresis gels. Synchrotron radiation X-ray fluorescence has been successfully employed for sensitive metal identification, and X-ray absorption spectroscopy for metal local structure speciation in proteins. Synchrotron based methods will be compared to ion beam and mass spectrometry for direct analysis of metalloproteins in electrophoresis gels.

  15. How to Use Eye Ointments and Gels Properly

    Science.gov (United States)

    ... be cloudy after using the ointment or gel Store medications out of reach of children Copyright 2013, American Society of Health-System Pharmacists. All rights reserved. This material may not be reproduced, displayed, modified, or distributed ...

  16. Rheological properties of magneto-responsive copolymer gels

    NARCIS (Netherlands)

    An, H.

    2012-01-01

    New magneto rheological systems that respond mechanically to external homogeneous magnetic fields, namely, physically cross-linked magneto rheological (MR) gels, were synthesized and investigated. Various aspects of the rheological behavior were considered such as linear viscoelastic response for va

  17. Observation of a microcrystalline gel in colloids with competing interactions.

    Science.gov (United States)

    Zhang, Tian Hui; Groenewold, Jan; Kegel, Willem K

    2009-12-14

    A stable short-range crystalline structure is observed in colloidal systems with competing short-range attractions and long-range repulsions. We term these structures "microcrystalline gels" as the microcrystals are embedded in a dense disordered network.

  18. SUPER TOUGH GELS WITH A DOUBLE NETWORK STRUCTURE

    Institute of Scientific and Technical Information of China (English)

    Tasuku Nakajima; Takayuki Kurokawa; Hidemitsu Furukawa; Qiu Ming Yu; Yoshimi Tanaka; Yoshihito Osada; Jian Ping Gong

    2009-01-01

    Living tissues work with fantastic functions in soft and wet gel-like state. Thus,hydrogels have attracted much attention as excellent soft and wet materials,suitable for making artificial organs for medical treatments. However,conventional hydrogels are mechanically too weak for practical uses. We have created double network (DN) hydrogels with extremely high mechanical strength in order to overcome this problem. DN gels are interpenetrating network (IPN) hydrogels consisting of rigid polyelectrolyte and soft neutral polymer. Their excellent mechanical properties cannot be explained by the standard fracture theories. In this paper,we discuss about the toughening mechanism of DN gels in accordance with their characteristic behavior,such as large hysteresis and necking phenomenon. We also describe the results on tissue engineering application of DN gels.

  19. Stronger multilayer acrylic dielectric elastomer actuators with silicone gel coatings

    Science.gov (United States)

    Lau, Gih-Keong; La, Thanh-Giang; Sheng-Wei Foong, Ervin; Shrestha, Milan

    2016-12-01

    Multilayer dielectric elastomer actuators (DEA) perform worst off than single-layer DEAs due to higher susceptibility to electro-thermal breakdown. This paper presents a hot-spot model to predict the electro-thermal breakdown field of DEAs and its dependence on thermal insulation. To inhibit the electrothermal breakdown, silicone gel coating was applied as barrier coating to multilayer acrylic DEA. The gel coating helps suppress the electro-thermally induced puncturing of DEA membrane at the hot spot. As a result, the gel-coated DEAs, in either a single layer or a multilayer stack, can produce 30% more isometric stress change as compared to those none-coated. These gel-coated acrylic DEAs show great potential to make stronger artificial muscles.

  20. Production of continuous mullite fiber via sol-gel processing

    Science.gov (United States)

    Tucker, Dennis S.; Sparks, J. Scott; Esker, David C.

    1990-01-01

    The development of a continuous ceramic fiber which could be used in rocket engine and rocket boosters applications was investigated at the Marshall Space Flight Center. Methods of ceramic fiber production such as melt spinning, chemical vapor deposition, and precursor polymeric fiber decomposition are discussed and compared with sol-gel processing. The production of ceramics via the sol-gel method consists of two steps, hydrolysis and polycondensation, to form the preceramic, followed by consolidation into the glass or ceramic structure. The advantages of the sol-gel method include better homogeneity and purity, lower preparation temperature, and the ability to form unique compositions. The disadvantages are the high cost of raw materials, large shrinkage during drying and firing which can lead to cracks, and long processing times. Preparation procedures for aluminosilicate sol-gel and for continuous mullite fibers are described.

  1. Preparation and evaluation of soft gellan gum gel containing paracetamol

    Directory of Open Access Journals (Sweden)

    Gohel M

    2009-01-01

    Full Text Available The objective of this study was to develop soft paracetamol gel using gellan gum as a gelling agent and sodium citrate as a source of cation. Different batches were prepared using three different concentrations of gellan gum (0.1, 0.3, and 0.5%, each with two different sodium citrate concentrations (0.3 and 0.5%. The consistency of the paracetamol gel was dependent on the concentration of gellan gum, sodium citrate and co-solute. The results of dissolution study of soft gel containing 0.3% gellan gum and 0.3% sodium citrate revealed that paracetamol was completely released in 30 min. Polyethylene glycol 400 worked as a solubilizer for paracetamol. All the gels possessed acceptable sensory characteristics when evaluated by human volunteers. Short term stability study carried out for four weeks at different temperatures revealed no considerable changes in performance characteristics of developed optimized formulation.

  2. Creep and Fracture of a Protein Gel under Stress

    Science.gov (United States)

    Leocmach, Mathieu; Perge, Christophe; Divoux, Thibaut; Manneville, Sébastien

    2014-07-01

    Biomaterials such as protein or polysaccharide gels are known to behave qualitatively as soft solids and to rupture under an external load. Combining optical and ultrasonic imaging to shear rheology we show that the failure scenario of a protein gel is reminiscent of brittle solids: after a primary creep regime characterized by a power-law behavior whose exponent is fully accounted for by linear viscoelasticity, fractures nucleate and grow logarithmically perpendicularly to shear, up to the sudden rupture of the gel. A single equation accounting for those two successive processes nicely captures the full rheological response. The failure time follows a decreasing power law with the applied shear stress, similar to the Basquin law of fatigue for solids. These results are in excellent agreement with recent fiber-bundle models that include damage accumulation on elastic fibers and exemplify protein gels as model, brittlelike soft solids.

  3. Congruence between starch gel and polyacrylamide gel electrophoresis in detecting allozyme variation in pulmonate land slugs.

    Science.gov (United States)

    Geenen, Sofie; Jordaens, Kurt; Castilho, Rita; Backeljau, Thierry

    2003-02-01

    The predominantly selfing slug species Arion (Carinarion) fasciatus, A. (C.) silvaticus and A. (C.) circumscriptus are native in Europe and have been introduced into North America, where each species consists of a single, homozygous multilocus genotype (strain), as defined by starch gel electrophoresis (SGE) of allozymes. In Europe, the "one strain per species" hypothesis does not hold since polyacrylamide gel electrophoresis (PAGE) of allozymes uncovered 46 strains divided over the three species. However, electrophoretic techniques may differ in their ability to detect allozyme variation. Therefore, several Carinarion populations from both continents were screened by applying the two techniques simultaneously on the same individual slugs and enzyme loci. SGE and PAGE yielded exactly the same results, so that the different degree of variation in North American and European populations cannot be attributed to differences in resolving power between SGE and PAGE. We found four A. (C.) silvaticus strains in North America indicating that in this region the "one strain per species" hypothesis also cannot be maintained. Hence, the discrepancies between previous electrophoretic studies on Carinarion are most likely due to sampling artefacts and possible founder effects.

  4. Blotting protein complexes from native gels to electron microscopy grids.

    Science.gov (United States)

    Knispel, Roland Wilhelm; Kofler, Christine; Boicu, Marius; Baumeister, Wolfgang; Nickell, Stephan

    2012-01-08

    We report a simple and generic method for the direct transfer of protein complexes separated by native gel electrophoresis to electron microscopy grids. After transfer, sufficient material remains in the gel for identification and characterization by mass spectrometry. The method should facilitate higher-throughput single-particle analysis by substantially reducing the time needed for protein purification, as demonstrated for three complexes from Thermoplasma acidophilum.

  5. Steady-state leaching of tritiated water from silica gel

    DEFF Research Database (Denmark)

    Das, H.A.; Hou, Xiaolin

    2009-01-01

    Aqueous leaching of tritium from silica gel, loaded by absorption of water vapor, makes part of reactor de-commissioning. It is found to follow the formulation of steady-state diffusion.......Aqueous leaching of tritium from silica gel, loaded by absorption of water vapor, makes part of reactor de-commissioning. It is found to follow the formulation of steady-state diffusion....

  6. Self-Healing Corrosion Protective Sol-Gel Coatings

    OpenAIRE

    Abdolah Zadeh, M.

    2016-01-01

    Inspired by the state of the art and the recent advances in the field of self-healing corrosion protective coatings, the thesis entitled “Self-healing corrosion protective sol-gel coatings” addresses novel routes to self-healing corrosion protective sol-gel coatings via extrinsic and intrinsic healing approaches. The employed approaches aim at extending the service life of the coating and the underlying substrate by multiple damage closure/sealing and metal surface protection through incorpor...

  7. А new factor effecting gel strength of pectin polysaccharides

    Directory of Open Access Journals (Sweden)

    S. E. Kholov

    2016-01-01

    Full Text Available Pectin polysaccharides obtained from various raw materials have a different component composition and form gels with water, sugar and acid or calcium. In this study, an experimental approach the gelation properties of different pectin samples, varied from different sources, using new methods of hydrolysis and purification. Samples were obtained by hydrolysis of accelerated extraction of pectin and purified by diaultrfiltration, have a high gel strength. The highest gel strength have been found in series of high methoxyl (HM- pectin samples of apple, peach, orange and low methoxyl (LM- pectin samples of commercial citrus pectin and apple pectin obtained by new method. It is shown that in addition to the basic parameters (the content of galacturonic acid, degree of esterification, molecular weight and hidrodinamic radius macromolecule to affect gel strength pectins aggregation of macromolecules, which is determined by the z-average molecular weight. There were observed a clear pattern of the influence of the molecular weight on hydrodynamic parameters for both HM- and LM- pectin samples on the gel strength. It were shown that a high values of molecular weight, intrinsic viscosity, and radius of gyration of pectin samples can significantly increase gel strength, while the value of Mz oppositely influenced the gel strength. As a result, a systematic analysis of this parameter and its relationship to the average molecular weight found that indeed the ratio Mz/Mw for pectin’s is an crucial to assess the quality of pectin at the study of gel strength for pectin polysaccharides.

  8. Steady-state leaching of tritiated water from silica gel

    DEFF Research Database (Denmark)

    Das, H.A.; Hou, Xiaolin

    2009-01-01

    Aqueous leaching of tritium from silica gel, loaded by absorption of water vapor, makes part of reactor de-commissioning. It is found to follow the formulation of steady-state diffusion.......Aqueous leaching of tritium from silica gel, loaded by absorption of water vapor, makes part of reactor de-commissioning. It is found to follow the formulation of steady-state diffusion....

  9. Chemical Sensors Based on Molecularly Imprinted Sol-Gel Materials

    OpenAIRE

    Dickert, Franz L.; Lieberzeit, Peter A.; Adnan Mujahid

    2010-01-01

    The sol-gel technique is earning the worldwide attention of researchers in the field of material science, due to its versatility in synthesizing inorganic ceramic materials at mild conditions. High purity, homogeneity, controlled porosity, stable temperature and nanoscale structuring are the most remarkable features offered by this method for generating highly sensitive and selective matrices to incorporate analyte molecules. The crafting of sol-gel sensors through molecular imprinting has pu...

  10. Pulsed field gel electrophoresis on frozen tumour tissue sections.

    OpenAIRE

    Boultwood, J; Kaklamanis, L.; Gatter, K C; Wainscoat, J S

    1992-01-01

    The application of pulsed field gel electrophoresis (PFGE) to the molecular genetic analysis of solid tumours has been restricted by the requirement for whole single cells as a DNA source. A simple technique which allows for the direct analysis of histologically characterised solid tumour material by pulsed field gel electrophoresis was developed. Single frozen tissue sections obtained from colonic carcinoma specimens were embedded without further manipulation in molten, low melting temperatu...

  11. Stochastic qualifier of gel and glass transitions in laponite suspensions

    Science.gov (United States)

    Shayeganfar, F.; Jabbari-Farouji, S.; Movahed, M. Sadegh; Jafari, G. R.; Tabar, M. Reza Rahimi

    2010-06-01

    The existence of the important similarities between gelation and glass transition makes it hard to distinguish between the two types of nonergodic states experimentally. Here, we report on a stochastic analysis of the scattered light intensity through a colloidal particles suspension during the gel and glass formation. In this analysis, we exploit the methods developed for complex hierarchical systems, such as turbulence. Using the multiplicative log-normal cascade models, we provide a criterion to distinguish gels from glasses.

  12. Development of Radiation Curable polymeric Gel Electrolyte Formulation

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Jin Hoo; Kim, Hyun Kyung; Shin, Choon Hee; Han, Chang Ho; Kim, Ki Ho [Chosun University, Gwangju (Korea, Republic of)

    2010-06-15

    The result of this study, the free lithium ions of polymer gel electrolyte containing hydroxyproply Cellulose 1% is the most excellent due to irradiate of strong energy over quick time, although curing reaction of EB system is a very fast, polymer gel electrolyte containing hydroxypropyl Cellulose Fabricated by UV system is excellent curing reaction and ionic conductivity and mechanical properties and thermal stability than EB system

  13. Electrochemical and spectroscopic characterization of surface sol-gel processes.

    Science.gov (United States)

    Chen, Xiaohong; Wilson, George S

    2004-09-28

    (3-Mercaptopropyl)trimethoxysilane (MTS) forms a unique film on a platinum substrate by self-assembly and sol-gel cross-linking. The gelating and drying states of the self-assembled MTS sol-gel films were probed by use of electrochemical and spectroscopic methods. The thiol moiety was the only active group within the sol-gel network. Gold nanoparticles were employed to detect the availability of the thiol group and their interaction further indicated the physicochemical states of the sol-gel inner structure. It was found that the thiol groups in the open porous MTS aerogel matrix were accessible to the gold nanoparticles while thiol groups in the compact MTS xerogel network were not accessible to the gold nanoparticles. The characteristics of the sol-gel matrix change with time because of its own irreversible gelating and drying process. The present work provides direct evidence of gold nanoparticle binding with thiol groups within the sol-gel structures and explains the different permeability of "aerogel" and "xerogel" films of MTS on the basis of electrochemical and spectroscopic results. Two endogenous species, hydrogen peroxide and ascorbic acid, were used to test the permeability of the self-assembled sol-gel film in different states. The MTS xerogel film on the platinum electrode was extremely selective against ascorbic acid while maintaining high sensitivity to hydrogen peroxide in contrast to the relatively high permeability of ascorbic acid in the MTS aerogel film. This study showed the potential of the MTS sol-gel film as a nanoporous material in biosensor development.

  14. FORMULATION AND EVALUATION OF HERBAL GEL OF MAGNIFERA INDICA LINN

    Directory of Open Access Journals (Sweden)

    Gaikwad D.D

    2012-11-01

    Full Text Available To formulate Magnifera indica Linn bark extract in to a gel. Ethanolic extract of dried bark of Magnifera indica Linn were subjected to priliminery phytochemical evaluation studies. Different gel formulations of ethanolic extract of Magnifera indica linn (2% w/v were prepared using polymers carbopol 934 & HPMC by varying their concentration. These formulation were evaluated for physical parameters, drug contains, Ph, viscosity, Extrudability, Spread ability, primary skin irritation, study.Keywords:

  15. A Biophysical Analysis of the Ocr Protein Gel

    OpenAIRE

    Higham, Richard G

    2007-01-01

    Ocr is unusual among proteins in its ability to form a transparent gel at high ammonium sulphate concentrations. This transition was investigated using a combination of spectroscopic, microscopic and rheological techniques. It occurs sharply at a concentration of 3.2M ammonium sulphate and is not observed with other types of salt. Rheological measurements showed that rather than precipitating under such conditions, ocr forms a weak viscoelastic gel. Far UV circular dichroism sp...

  16. Giant Volume Change of Active Gels under Continuous Flow

    Science.gov (United States)

    2014-04-21

    communication17 of BZ droplets and chemical self-organiza- tion,18 the properties and potential of self-oscillating gels in a microfluidic system have yet to be...active gels driven by the Belousov−Zhabotinsky reaction. These results demon- strate that microfluidics offers a useful and facile experimental...soft materials and microfluidic systems. ■ INTRODUCTION This paper reports the use of a continuous reactant flow in a microfluidic system to achieve

  17. Composite sol-gel coatings on steel for tribological applications

    OpenAIRE

    Hermange, Kurt

    2016-01-01

    This thesis focuses on the elaboration and the characterization of composite sol-gel coatings “CSG” on austenitic stainless steelAISI 304. The aim of the thesis is to develop the process and to study the mechanical properties and tribological behavior of thecoatings. The first experimental part presents the optimization of the synthesis conditions of a stable alumina sol and the influence of the thermal treatment of the gel on the physic-chemical and thermostructural properties. The studied p...

  18. Diced electrophoresis gel assay for screening enzymes with specified activities.

    Science.gov (United States)

    Komatsu, Toru; Hanaoka, Kenjiro; Adibekian, Alexander; Yoshioka, Kentaro; Terai, Takuya; Ueno, Tasuku; Kawaguchi, Mitsuyasu; Cravatt, Benjamin F; Nagano, Tetsuo

    2013-04-24

    We have established the diced electrophoresis gel (DEG) assay as a proteome-wide screening tool to identify enzymes with activities of interest using turnover-based fluorescent substrates. The method utilizes the combination of native polyacrylamide gel electrophoresis (PAGE) with a multiwell-plate-based fluorometric assay to find protein spots with the specified activity. By developing fluorescent substrates that mimic the structure of neutrophil chemoattractants, we could identify enzymes involved in metabolic inactivation of the chemoattractants.

  19. [Microchips based on three dimensional gel cells: history and perspective].

    Science.gov (United States)

    Kolchinskiĭ, A M; Griadunov, D A; Lysov, Iu P; Mikhaĭlovich, V M; Nasedkina, T V; Turygin, A Iu; Rubina, A Iu; Barskiĭ, V E; Zasedatelev, A S

    2004-01-01

    The review describes the history of creation and development of the microchip technology and its role in the human genome project in Russia. The emphasis is placed on the three-dimensional gel-based microchips developed at the Center of Biological Microchips headed by A.D. Mirzabekov since 1988. The gel-based chips of the last generation, IMAGE chips (Immobilized Micro Array of Gel Elements), have a number of advantages over the previous versions. The microchips are manufactured by photo-initiated copolymerization of gel components and immobilized molecules (DNA, proteins, and ligands). This ensures an even distribution of the immobilized probe throughout the microchip gel element with a high yield (about 50% for oligonucleotides). The use of methacrylamide as a main component of the polymerization mixture resulted in a substantial increase of gel porosity without affecting its mechanical strength and stability, which allowed one to work with the DNA fragments of up to 500 nt in length, as well as with rather large protein molecules. At present, the gel-based microchips are widely applied to address different problems. The generic microchips containing a complete set of possible hexanucleotides are used to reveal the DNA motifs binding with different proteins and to study the DNA-protein interactions. The oligonucleotide microchips are a cheap and reliable tool of diagnostics designed for mass application. Biochips have been developed for identification of the tuberculosis pathogen and its antibiotic-resistant forms; for diagnostics of orthopoxviruses, including the smallpox virus; for diagnostics of the anthrax pathogen; and for identification of chromosomal rearrangements in leukemia patients. The protein microchips can be adapted for further use in proteomics. Bacterial and yeast cells were also immobilized in the gel, maintaining their viability, which open a wide potential for creation biosensors on the basis of microchips.

  20. Biomimetic Crawling Motion of Soft and Slender Gel-worm

    Institute of Scientific and Technical Information of China (English)

    Song Miao LIANG; Jian XU; Li Na ZHANG

    2006-01-01

    Inspired by the locomotion of terrestrial limbless animals, the present work attempt to study the motion of biomimetic system based on poly(vinyl alcohol)/dimethylsulfoxide gel. The system was operated in air by employing a non-contacted DC electric field. The results showed that the gel exhibited a long-range snail-like motion and had a very fast response rate.

  1. Differentiation of black gel inks using optical and chemical techniques.

    Science.gov (United States)

    Wilson, Jeffrey D; LaPorte, Gerald M; Cantu, Antonio A

    2004-03-01

    Gel ink pens have become a common writing instrument in the United States. Questioned document examiners often attempt to optically differentiate gel inks from each other and from other non-ballpoint ink writings (e.g., those from roller-ball pens). Since early formulations were primarily pigment-based, they do not elute when analyzed by thin-layer chromatography. However, recent gel ink formulations (i.e., within the past five years) include dye-based inks that can be easily separated. This study differentiates black gel inks using optical and chemical techniques. The techniques include: microscopy, visible and near infrared reflectance, near infrared luminescence, thin-layer chromatography (TLC), spot tests, and gas chromatography/mass spectrometry (GC/MS). As a result of this study a flow chart has been developed allowing for a systematic determination of a questioned ink. In addition, an analysis of volatile compounds found in gel inks revealed that there are some unique ingredients that may be found in gel inks that are not typically found in other non-ballpoint inks.

  2. Comparative Skeletal Muscle Proteomics Using Two-Dimensional Gel Electrophoresis.

    Science.gov (United States)

    Murphy, Sandra; Dowling, Paul; Ohlendieck, Kay

    2016-09-09

    The pioneering work by Patrick H. O'Farrell established two-dimensional gel electrophoresis as one of the most important high-resolution protein separation techniques of modern biochemistry (Journal of Biological Chemistry1975, 250, 4007-4021). The application of two-dimensional gel electrophoresis has played a key role in the systematic identification and detailed characterization of the protein constituents of skeletal muscles. Protein changes during myogenesis, muscle maturation, fibre type specification, physiological muscle adaptations and natural muscle aging were studied in depth by the original O'Farrell method or slightly modified gel electrophoretic techniques. Over the last 40 years, the combined usage of isoelectric focusing in the first dimension and sodium dodecyl sulfate polyacrylamide slab gel electrophoresis in the second dimension has been successfully employed in several hundred published studies on gel-based skeletal muscle biochemistry. This review focuses on normal and physiologically challenged skeletal muscle tissues and outlines key findings from mass spectrometry-based muscle proteomics, which was instrumental in the identification of several thousand individual protein isoforms following gel electrophoretic separation. These muscle-associated protein species belong to the diverse group of regulatory and contractile proteins of the acto-myosin apparatus that forms the sarcomere, cytoskeletal proteins, metabolic enzymes and transporters, signaling proteins, ion-handling proteins, molecular chaperones and extracellular matrix proteins.

  3. The Influence of Microgravity on Silica Sol-Gel Formation

    Science.gov (United States)

    Sibille, L.; Smith, D. D.; Cronise, R.; Hunt, A. J.; Wolfe, D. B.; Snow, L. A.; Oldenberg, S.; Halas, N.; Rose, M. Franklin (Technical Monitor)

    2000-01-01

    We discuss space-flight experiments involving the growth of silica particles and gels. The effect of microgravity on the growth of silica particles via the sol-gel route is profound. In four different recipes spanning a large range of the parameter space that typically produces silica nanoparticles in unit-gravity, low-density gel structures were instead formed in microgravity. The particles that did form were generally smaller and more polydisperse than those grown on the ground. These observations suggest that microgravity reduces the particle growth rate, allowing unincorporated species to form aggregates and ultimately gel. Hence microgravity favors the formation of more rarefied structures, providing a bias towards diffusion-limited cluster-cluster aggregation. These results further suggest that in unit gravity, fluid flows and sedimentation can significantly perturb sol-gel substructures prior to gelation and these deleterious perturbations may be "frozen" into the resulting microstructure. Hence, sol-gel pores may be expected to be smaller, more uniform, and less rough when formed in microgravity.

  4. A zwitterionic gel electrolyte for efficient solid-state supercapacitors.

    Science.gov (United States)

    Peng, Xu; Liu, Huili; Yin, Qin; Wu, Junchi; Chen, Pengzuo; Zhang, Guangzhao; Liu, Guangming; Wu, Changzheng; Xie, Yi

    2016-05-26

    Gel electrolytes have attracted increasing attention for solid-state supercapacitors. An ideal gel electrolyte usually requires a combination of advantages of high ion migration rate, reasonable mechanical strength and robust water retention ability at the solid state for ensuring excellent work durability. Here we report a zwitterionic gel electrolyte that successfully brings the synergic advantages of robust water retention ability and ion migration channels, manifesting in superior electrochemical performance. When applying the zwitterionic gel electrolyte, our graphene-based solid-state supercapacitor reaches a volume capacitance of 300.8 F cm(-3) at 0.8 A cm(-3) with a rate capacity of only 14.9% capacitance loss as the current density increases from 0.8 to 20 A cm(-3), representing the best value among the previously reported graphene-based solid-state supercapacitors, to the best of our knowledge. We anticipate that zwitterionic gel electrolyte may be developed as a gel electrolyte in solid-state supercapacitors.

  5. The Synthesis of a Novel Cellulose Physical Gel

    Directory of Open Access Journals (Sweden)

    Jiufang Duan

    2014-01-01

    Full Text Available Cellulose possessing β-cyclodextrin (β-CD was used as a host molecule and cellulose possessing ferrocene (Fc as a guest polymer. Infrared spectra, differential scanning calorimetry (DSC, ultraviolet spectroscopy (UV, and contact angle analysis were used to characterise the material structure and the inclusion behaviour. The results showed that the β-CD-cellulose and the Fc-cellulose can form inclusion complexes. Moreover, ferrocene oxidation, and reduction of state can be adjusted by sodium hypochlorite (NaClO as an oxidant and glutathione (GSH as a reductant. In this study, a physical gel based on β-CD-cellulose/Fc-cellulose was formed under mild conditions in which autonomous healing between cut surfaces occurred after 24 hours. The physical gel can be controlled in the sol-gel transition. The compressive strength of the Fc-cellulose/β-CD-cellulose gel increased with increased cellulose concentration. The host-guest interaction between the side chains of cellulose could strengthen the gel. The cellulose physical gel may eventually be used as a stimulus-responsive, healing material in biomedical applications.

  6. Triol Based Polyurethane Gel Electrolytes for Electrochemical Devices

    Science.gov (United States)

    Kulkarni, A. R.

    2006-06-01

    Polyurethane gel electrolytes with various solvents such as propylene carbonate (PC), propylene carbonate - ethylene carbonate (PC-EC) and γ-butyrolactone - ethylene carbonate (GBL-EC) were synthesized and studied by different characterization tools. Impedance spectroscopy and nuclear magnetic resonance spectroscopy (NMR) provides the insight on ionic mobility in the gel electrolyte. The syneresis effect was studied by observing the weight loss as a function of time. Morphology of the gel electrolyte was investigated by ESEM. Among the various compositions, the maximum conductivity was observed for 35%PU-60%EC/GBL-5%LiClO4. The maximum conductivity of gel electrolytes was found to be 3.98 × 10-3 S/cm at the room temperature, which is higher than that reported in the domain of published literature for the thermoplastic polyurethane family. Moreover, merely 3.5% weight loss was observed for the period of 30 days. The 3.5% wt solvent loss has negligible effect on the conductivity of the gel electrolyte. Test cell was fabricated using polyurethane gel electrolyte and discharge characteristic was studied.

  7. A zwitterionic gel electrolyte for efficient solid-state supercapacitors

    Science.gov (United States)

    Peng, Xu; Liu, Huili; Yin, Qin; Wu, Junchi; Chen, Pengzuo; Zhang, Guangzhao; Liu, Guangming; Wu, Changzheng; Xie, Yi

    2016-05-01

    Gel electrolytes have attracted increasing attention for solid-state supercapacitors. An ideal gel electrolyte usually requires a combination of advantages of high ion migration rate, reasonable mechanical strength and robust water retention ability at the solid state for ensuring excellent work durability. Here we report a zwitterionic gel electrolyte that successfully brings the synergic advantages of robust water retention ability and ion migration channels, manifesting in superior electrochemical performance. When applying the zwitterionic gel electrolyte, our graphene-based solid-state supercapacitor reaches a volume capacitance of 300.8 F cm-3 at 0.8 A cm-3 with a rate capacity of only 14.9% capacitance loss as the current density increases from 0.8 to 20 A cm-3, representing the best value among the previously reported graphene-based solid-state supercapacitors, to the best of our knowledge. We anticipate that zwitterionic gel electrolyte may be developed as a gel electrolyte in solid-state supercapacitors.

  8. Sol-gel Technology and Advanced Electrochemical Energy Storage Materials

    Science.gov (United States)

    Chu, Chung-tse; Zheng, Haixing

    1996-01-01

    Advanced materials play an important role in the development of electrochemical energy devices such as batteries, fuel cells, and electrochemical capacitors. The sol-gel process is a versatile solution for use in the fabrication of ceramic materials with tailored stoichiometry, microstructure, and properties. This processing technique is particularly useful in producing porous materials with high surface area and low density, two of the most desirable characteristics for electrode materials. In addition,the porous surface of gels can be modified chemically to create tailored surface properties, and inorganic/organic micro-composites can be prepared for improved material performance device fabrication. Applications of several sol-gel derived electrode materials in different energy storage devices are illustrated in this paper. V2O5 gels are shown to be a promising cathode material for solid state lithium batteries. Carbon aerogels, amorphous RuO2 gels and sol-gel derived hafnium compounds have been studied as electrode materials for high energy density and high power density electrochemical capacitors.

  9. Sol-gel-based biosensing applied to medicinal science.

    Science.gov (United States)

    Moreira, Felismina T C; Moreira-Tavares, Ana P; Sales, M Goreti F

    2015-01-01

    Biosensors have opened new horizons in biomedical analysis, by ensuring increased assay speed and flexibility, and allowing point-of-care applications, multi-target analyses, automation and reduced costs of testing. This has been a result of many studies merging nanotechnology with biochemistry over the years, thereby enabling the creation of more suitable environments to biological receptors and their substitution by synthetic analogue materials. Sol-gel chemistry, among other materials, is deeply involved in this process. Sol-gel processing allows the immobilization of organic molecules, biomacromolecules and cells maintaining their properties and activities, permitting their integration into different transduction devices, of electrochemical or optical nature, for single or multiple analyses. Sol-gel also allows to the production of synthetic materials mimicking the activity of natural receptors, while bringing advantages, mostly in terms of cost and stability. Moreover, the biocompatibility of sol-gel materials structures of biological nature allowed the use of these materials in emerging in vivo applications. In this chapter, biosensors for biomedical applications based on sol-gel derived composites are presented, compared and described, along with current emerging applications in vivo, concerning drug delivery or biomaterials. Sol-gel materials are shown as a promising tool for current, emerging and future medical applications.

  10. Nanoparticle gel electrophoresis: bare charged spheres in polyelectrolyte hydrogels.

    Science.gov (United States)

    Li, Fei; Hill, Reghan J

    2013-03-15

    Nanoparticle gel electrophoresis has recently emerged as an attractive means of separating and characterizing nanoparticles. Consequently, a theory that accounts for electroosmotic flow in the gel, and coupling of the nanoparticle and hydrogel electrostatics and hydrodynamics, is required, particularly for gels in which the mesh size is comparable to or smaller than the particle radii. Here, we present an electrokinetic model for charged, spherical colloidal particles undergoing electrophoresis in charged (polyelectrolyte) hydrogels: the gel-electrophoresis analogue of Henry's theory for electrophoresis in Newtonian electrolytes. We compare numerically exact solutions of the model with several independent asymptotic approximations, identifying regions in the parameter space where these approximations are accurate or break down. As previously assumed in the literature, Henry's formula, modified by the addition of a constant electroosmotic flow mobility, is accurate only for nanoparticles that are small compared to the hydrogel mesh size. We derived an exact analytical solution of the full model by judiciously modifying the theory of Allison et al. for uncharged gels, drawing on the superposition methodology of Doane et al. to account for hydrogel charge. This furnishes accurate and economical mobility predictions for the entire parameter space. The present model suggests that nanoparticle size separations (with diameters ≲40 nm) are optimal at low ionic strength, with a gel mesh size that is selected according to the particle charging mechanism. For weakly charged particles, optimal size separation is achieved when the Brinkman screening length is matched to the mean particle size. Copyright © 2012 Elsevier Inc. All rights reserved.

  11. Formation and properties of gels based on lipo-plexes.

    Science.gov (United States)

    Pucci, Carlotta; Tardani, Franco; La Mesa, Camillo

    2014-06-12

    Aqueous systems containing sodium taurodeoxycholate and, eventually, soybean lecithin were investigated. Depending on the relative amounts of two such species, molecular, micellar, vesicular, liquid crystalline, and solid phases were formed. In the presence of bovine serum albumin, micellar and vesicular systems form lipo-plexes. The latter self-organize into gels, depending on composition and thermal treatments. According to scanning electron microscopy, vesicle-based gels obtained from lipo-plexes form sponge-like entities, whereas micelle-based ones self-arrange in fibrous organizations. Gels are characterized by a significant viscoelasticity in a wide temperature and frequency range. Rheological data were interpreted by assuming strict relations between the system response and the self-organization of the lipo-plexes into gels. It was inferred that differences in the gel properties depend on the different self-assembly modes of the aggregates formed by the mentioned lipo-plexes. Use of the above systems in biomedical applications, mostly in the preparation of matrices requiring the use of smart and biocompatible gels, is suggested.

  12. Comparative Skeletal Muscle Proteomics Using Two-Dimensional Gel Electrophoresis

    Directory of Open Access Journals (Sweden)

    Sandra Murphy

    2016-09-01

    Full Text Available The pioneering work by Patrick H. O’Farrell established two-dimensional gel electrophoresis as one of the most important high-resolution protein separation techniques of modern biochemistry (Journal of Biological Chemistry 1975, 250, 4007–4021. The application of two-dimensional gel electrophoresis has played a key role in the systematic identification and detailed characterization of the protein constituents of skeletal muscles. Protein changes during myogenesis, muscle maturation, fibre type specification, physiological muscle adaptations and natural muscle aging were studied in depth by the original O’Farrell method or slightly modified gel electrophoretic techniques. Over the last 40 years, the combined usage of isoelectric focusing in the first dimension and sodium dodecyl sulfate polyacrylamide slab gel electrophoresis in the second dimension has been successfully employed in several hundred published studies on gel-based skeletal muscle biochemistry. This review focuses on normal and physiologically challenged skeletal muscle tissues and outlines key findings from mass spectrometry-based muscle proteomics, which was instrumental in the identification of several thousand individual protein isoforms following gel electrophoretic separation. These muscle-associated protein species belong to the diverse group of regulatory and contractile proteins of the acto-myosin apparatus that forms the sarcomere, cytoskeletal proteins, metabolic enzymes and transporters, signaling proteins, ion-handling proteins, molecular chaperones and extracellular matrix proteins.

  13. Crystal growth of proteins, nucleic acids, and viruses in gels.

    Science.gov (United States)

    Lorber, Bernard; Sauter, Claude; Théobald-Dietrich, Anne; Moreno, Abel; Schellenberger, Pascale; Robert, Marie-Claire; Capelle, Bernard; Sanglier, Sarah; Potier, Noëlle; Giegé, Richard

    2009-11-01

    Medium-sized single crystals with perfect habits and no defect producing intense and well-resolved diffraction patterns are the dream of every protein crystallographer. Crystals of biological macromolecules possessing these characteristics can be prepared within a medium in which mass transport is restricted to diffusion. Chemical gels (like polysiloxane) and physical gels (such as agarose) provide such an environment and are therefore suitable for the crystallisation of biological macromolecules. Instructions for the preparation of each type of gel are given to urge crystal growers to apply diffusive media for enhancing crystallographic quality of their crystals. Examples of quality enhancement achieved with silica and agarose gels are given. Results obtained with other substances forming gel-like media (such as lipidic phases and cellulose derivatives) are presented. Finally, the use of gels in combination with capillary tubes for counter-diffusion experiments is discussed. Methods and techniques implemented with proteins can also be applied to nucleic acids and nucleoprotein assemblies such as viruses.

  14. Serratiopeptidase Niosomal Gel with Potential in Topical Delivery

    Directory of Open Access Journals (Sweden)

    Ujwala A. Shinde

    2014-01-01

    Full Text Available The objective of present study was to develop nonionic surfactant vesicles of proteolytic enzyme serratiopeptidase (SRP by adapting reverse phase evaporation (REV technique and to evaluate the viability of SRP niosomal gel in treating the topical inflammation. The feasibility of SRP niosomes by REV method using Span 40 and cholesterol has been successfully demonstrated in this investigation. The entrapment efficiency was found to be influenced by the molar ratio of Span 40 : cholesterol and concentration of SRP in noisome. The developed niosomes were characterized for morphology, particle size, and in vitro release. Niosomal gel was prepared by dispersing xanthan gum into optimized batch of SRP niosomes. Ex vivo permeation and in vivo anti-inflammatory efficacy of gel formulation were evaluated topically. SRP niosomes obtained were round in nanosize range. At Span 40 : cholesterol molar ratio 1 : 1 entrapment efficiency was maximum, that is, 54.82% ± 2.08, and showed consistent release pattern. Furthermore ex vivo skin permeation revealed that there was fourfold increase in a steady state flux when SRP was formulated in niosomes and a significant increase in the permeation of SRP, from SRP niosomal gel containing permeation enhancer. In vivo efficacy studies indicated that SRP niosomal gel had a comparable topical anti-inflammatory activity to that of dicolfenac gel.

  15. Low-cost two-dimensional gel densitometry.

    Science.gov (United States)

    Levenson, R M; Maytin, E V; Young, D A

    1986-11-01

    A major obstacle to full utilization of the powerful technique of two-dimensional (2-D) gel electrophoresis is the expense and complexity of quantifying the results. Using an analog-to-digital converter already present in the widely available Commodore 64 or Commodore 128 microcomputer, we have developed a 2-D gel densitometer (GELSCAN) which adds only $20.00 to the cost of the Commodore system (currently around $700.00). The system is designed to work with autoradiograms of 2-D gels. Spots of interest are identified visually and then positioned manually over a light source. A pinhole photoelectric sensor mounted in a hand-held, Plexiglas holder, or "mouse," is briefly rubbed over each spot. Maximum density of the spot is determined and its value is converted to counts per minute via an internal calibration curve which corrects for the nonlinear response of film to radiation. Local spot backgrounds can be subtracted and values can be normalized between gels to adjust for variation in amount of radioactivity applied or in exposure time. Reproducibility is excellent and the technique has some practical as well as theoretical advantages over other more complicated approaches to 2-D gel densitometry. In addition, the GELSCAN system can also be used for scanning individual bands in 1-D gels, quantitation of "dot-blot" autoradiograms and other tasks involving transmission densitometry.

  16. Formation and rupture of Ca2+induced pectin biopolymer gels

    Science.gov (United States)

    Basak, Rajib; Bandyopadhyay, Ranjini

    When calcium salts are added to an aqueous solution of polysaccharide pectin, ionic cross-links form between pectin chains, giving rise to a gel network in dilute solution. In this work, dynamic light scattering (DLS) is employed to study the microscopic dynamics of the fractal aggregates (flocs) that constitute the gels, while rheological measurements are performed to study the process of gel rupture. As calcium salt concentration is increased, DLS experiments reveal that the polydispersities of the flocs increase simultaneously with the characteristic relaxation times of the gel network. Above a critical salt concentration, the flocs become interlinked to form a reaction-limited fractal gel network. Rheological studies demonstrate that the limits of the linear rheological response and the critical stresses required to rupture these networks both decrease with increase in salt concentration. These features indicate that the ion-mediated pectin gels studied here lie in a `strong link' regime that is characterised by inter-floc links that are stronger than intra-floc links. A scaling analysis of the experimental data presented here demonstrates that the elasticities of the individual fractal flocs exhibit power-law dependences on the added salt concentration. We conclude that when pectin and salt concentrations are both increased, the number of fractal flocs of pectin increases simultaneously with the density of crosslinks, giving rise to very large values of the bulk elastic modulus.

  17. 关于 AGM-GEL 混用的讨论%Discussion about AGM/GEL hybrid battery

    Institute of Scientific and Technical Information of China (English)

    赵剑曦; 岳斌; 孙小祥

    2015-01-01

    The results in references about AGM/GEL hybrid battery were analyzed and the hybridization mechanism was concluded. No overlapping effect of their superiorities but the effect of gel was found when AGM and GEL technology was hybridized. The importance of the special separator using in GEL battery was emphasized and the further improvement for this separator was suggested.%本文分析了 AGM和 GEL混用的文献结果,总结了二者混用的机理观点,认为它们并不能出现优势叠加的效果,可能仅是 GEL的表现.强调了在引入 GEL后专用隔板的重要性,并提出这种隔板研发的方向.

  18. The effects of brushing on human enamel surface roughness after NaF gel and theobromine gel exposure

    Science.gov (United States)

    Mahardhika, A.; Noerdin, A.; Eriwati, Y. K.

    2017-08-01

    This study aimed to determine the effects of brushing on human enamel surface roughness after different exposure times of 200 mg/L theobromine gel (8, 16, and 32 minutes) and 2% NaF gel (16 minutes). Twenty-four human upper premolars were used and divided into four groups. Group 1 was exposed to 2% NaF gel for 16 minutes. In contrast, groups 2, 3, and 4 were exposed to 200 mg/L theobromine gel for 8 minutes, 16 minutes, and 32 minutes, and each group was then brushed for 9 minutes and 20 seconds. After the treatment, samples were tested using a surface roughness tester (Mitutoyo SJ 301, Japan). The Wilcoxon test showed significant changes (p enamel surface and then increase roughness after brushing.

  19. Fabrication and Optimization of a PAGATA Gel Dosimeter: Increasing the Melting Point of the PAGAT Gel Dosimeter with Agarose Additive

    Directory of Open Access Journals (Sweden)

    Bakhtiar Azadbakht

    2010-12-01

    Full Text Available Introduction: The PAGAT polymer gel dosimeter melts at 30 ˚C and even at room temperature during the summer, so it needs to be kept in a cool place such as a refrigerator. To increase the stability of the PAGAT gel, different amounts of agarose were added to the PAGAT gel composition and the PAGATA gel was manufactured. Material and Methods: The PAGATA gel vials were irradiated using a Co-60 machine. Then, the samples were evaluated using a 1.5 T Siemens MRI scanner. The ingredients of the PAGATA normoxic gel dosimeter were 4.5% N-N' methylen-bis-acrylamide, 4.5% acrylamide, 4.5% gelatine, 5 mM tetrakis (THPC, 0.01 mM hydroquinone (HQ, 0.5% agarose and 86% de-ionized water (HPLC. Results: Melting point and sensitivity of the PAGAT gel dosimeter with addition of 0.0, 0.3, 0.5, 1.0, 1.5 and 2.0% of agarose were measured, in which the melting points were increased to 30, 82, 86, 88, 89 and 90°C and their sensitivities found to be 0.113, 0.1059, 0.125, 0.122, 0.115 and 0.2  respectively. Discussion and Conclusions: Adding agarose increased the sensitivity and background R2 of the evaluated samples. The optimum amount of agarose was found to be 0.5% regarding these parameters and also the melting point of the gel dosimeter. A value of 0.5% agarose was found to be an optimum value considering the increase of sensitivity to 0.125 and melting point to 86°C but at the expense of increasing the background R2 to 4.530.

  20. Quantifying platelet gel coagulation using Sonoclot and Thrombelastograph hemostasis analyzer.

    Science.gov (United States)

    Cassidy, Lynsay K; Finney, Angela S; Ellis, William Cory; Spiwak, Allison J; Riley, Jeffrey B

    2005-03-01

    Little in vitro research exists discussing platelet gel composition and the resulting strength and degradation characteristics using point-of-care technologies. There must be a quantifiable way of determining the structural integrity of the resulting formed platelet gel thrombus. The Thrombelastograph Hemostasis Analyzer (TEG) and Sonoclot measure the elasticity of a clot as it forms and subsequently degrades naturally. The objective of this study was to determine the application of TEG and Sonoclot technologies as point-of-care devices for technicians using platelet gel therapy. The collected bovine blood was anticoagulated with CPD and processed using a previously published plasma sequestration protocol, using normal saline as a wash solution. The resulting platelet-rich plasma was stored in a sequestration bag in a water bath to maintain the blood temperature at 37 degrees C. Sequestered bovine platelet-rich plasma was made into platelet gel using three different thrombin concentrations. A total of 30 experiments were performed on the platelet gel product using both the TEG and the Sonoclot. We discovered that 6 of the Sonoclot tests and 15 of the TEG tests were valid. None of the TEG clot signatures and nine of the Sonoclot signatures were discovered to be invalid. A chi2 test was performed on the resultant data. The value of the chi2 test was calculated to be 12.86, which translated into a p value of less than 0.001. Despite the vast use and growing popularity of platelet gels, a method in which to quantify platelet gels has yet to be reported. There remains a possibility that gels formed with different concentrations of components may prove useful in different areas of surgery or their uses may expand to a broader spectrum of medicine. However, technology to quantify platelet gels must first be standardized. On the basis of the data collected in this study, it was determined that the TEG and the Sonoclot are not equally capable of analyzing platelet gel clots

  1. Modification of gel architecture and TBE/TAE buffer composition to minimize heating during agarose gel electrophoresis.

    Science.gov (United States)

    Sanderson, Brian A; Araki, Naoko; Lilley, Jennifer L; Guerrero, Gilberto; Lewis, L Kevin

    2014-06-01

    Agarose gel electrophoresis of DNA and RNA is routinely performed using buffers containing either Tris, acetate, and EDTA (TAE) or Tris, borate, and EDTA (TBE). Gels are run at a low, constant voltage (∼10 V/cm) to minimize current and asymmetric heating effects, which can induce band artifacts and poor resolution. In this study, alterations of gel structure and conductive media composition were analyzed to identify factors causing higher electrical currents during horizontal slab gel electrophoresis. Current was reduced when thinner gels and smaller chamber buffer volumes were used, but was not influenced by agarose concentration or the presence of ethidium bromide. Current was strongly dependent on the amount and type of EDTA used and on the concentrations of the major acid-base components of each buffer. Interestingly, resolution and the mobilities of circular versus linear plasmid DNAs were also affected by the chemical form and amount of EDTA. With appropriate modifications to gel structure and buffer constituents, electrophoresis could be performed at high voltages (20-25 V/cm), reducing run times by up to 3-fold. The most striking improvements were observed with small DNAs and RNAs (10-100 bp): high voltages and short run times produced sharper bands and higher resolution. Copyright © 2014 Elsevier Inc. All rights reserved.

  2. Electrically induced gel-sol transition of polyvinyl alcohol/ polyacrylamide semi-interpenetrated hydrogels

    Institute of Scientific and Technical Information of China (English)

    Xia Chao Jin; Yong Min Huang; Hong Lai Liu

    2009-01-01

    Polyvinyl alcohol/polyacrylamide semi-interpenetrated hydrogels were prepared via freeze-thaw process. When a 20 V of DC was applied across the gels, the gels with lower polyacrylamide content underwent a contraction or partly turned into solution, while for the gels with higher polyacrylamide concentration, a complete gel-sol transition was observed in a short time.

  3. Analyzing genetic diversity in conifers...isozyme resolution by starch gel electrophoresis

    Science.gov (United States)

    M. Thompson Conkle

    1972-01-01

    Enzymes in forest tree materials can be resolved by starch gel electrophoresis. A gel slab is prepared in a mold assembled from glass and plastic. Wicks containing an aqueous extract of macerated plant material are inserted in the gel and processed. The gel is sliced, stained, examined, and photographed. Isozyme bands produced by differential migration of enzymes...

  4. Oil droplet release from emulsion-filled gels in relation to sensory perception

    NARCIS (Netherlands)

    Sala, G.; Velde, van de F.; Cohen Stuart, M.A.; Aken, van G.A.

    2007-01-01

    Oil droplet release upon shearing was studied in emulsion-filled gels containing oil droplets either bound or unbound to the gel matrix. At 20 °C no release was observed for gels containing droplets bound to the matrix, whereas the release measured for gels with unbound droplets related to the fat c

  5. Food gels filled with emulsion droplets : linking large deformation properties to sensory perception

    NARCIS (Netherlands)

    Sala, G.

    2007-01-01

    Key words: polymer gels, particle gels, emulsion, large deformation, friction, sensory

      This thesis reports studies on the large deformation and lubrication properties of emulsion-filled gels and the way these properties are related to the sensory perception of the gels. The des

  6. Dynamic Behavior and Mass Transport in Polyacrylic Acid Gel by Dynamic Light Scattering

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Dynamic behaviors on polyacrylic acid (PAA) gels and mass (small molecules) transports in the gels have been studied mainly by dynamic light scattering (DLS). The cross-linking degree (fc), monomer concentration (Cm) and temperature of the gels have significant influences on its dynamic behavior and mass transport in the gels. The increase of fc leads to decrease of the mesh sizes of the gels, thus the obstacle of the gels for mass transport is increased. As a result, small molecular diffusion Dk in the gels is decreased. So even if for small molecules, the Dk also is influenced.

  7. To gel or not to gel: correlating molecular gelation with solvent parameters.

    Science.gov (United States)

    Lan, Y; Corradini, M G; Weiss, R G; Raghavan, S R; Rogers, M A

    2015-10-07

    Rational design of small molecular gelators is an elusive and herculean task, despite the rapidly growing body of literature devoted to such gels over the past decade. The process of self-assembly, in molecular gels, is intricate and must balance parameters influencing solubility and those contrasting forces that govern epitaxial growth into axially symmetric elongated aggregates. Although the gelator-gelator interactions are of paramount importance in understanding gelation, the solvent-gelator specific (i.e., H-bonding) and nonspecific (dipole-dipole, dipole-induced and instantaneous dipole induced forces) intermolecular interactions are equally important. Solvent properties mediate the self-assembly of molecular gelators into their self-assembled fibrillar networks. Herein, solubility parameters of solvents, ranging from partition coefficients (log P), to Henry's law constants (HLC), to solvatochromic parameters (ET(30)), and Kamlet-Taft parameters (β, α and π), and to Hansen solubility parameters (δp, δd, δh), are correlated with the gelation ability of numerous classes of molecular gelators. Advanced solvent clustering techniques have led to the development of a priori tools that can identify the solvents that will be gelled and not gelled by molecular gelators. These tools will greatly aid in the development of novel gelators without solely relying on serendipitous discoveries. These tools illustrate that the quest for the universal gelator should be left in the hands of Don Quixote and as researchers we must focus on identifying gelators capable of gelling classes of solvents as there is likely no one gelator capable of gelling all solvents.

  8. Cryopreservation and gel collagen culture of porcine hepatocytes

    Institute of Scientific and Technical Information of China (English)

    Hong-Ling Liu; Ying-Jie Wang; Hai-Tao Guo; Yu-Ming Wang; Jun Liu; Yue-Cheng Yu

    2004-01-01

    AIM: To study the method of cryopreserving porcine hepatocytes and gel collagen culture measure after its cryopreservation.METHODS: Hepatocytes, isolated from Chinese experimental suckling mini-pigs by two-step perfusion with collagenase using an extra corporeal perfusion apparatus, were cryopreserved with 50 mL/L to 200 mL/L DMSO in liquid nitrogen for 4 mo, then thawed and seeded in 1 or between 2 layers of gel collagen. The expression of porcine albumin message RNA, cellular morphology and content of aspartate aminotransferase (AST) and urea nitrogen (UN) were examined during culture in gel.RESULTS: Viability of 150 mL/L DMSO group thawed hepatocytes was (83±4)%, but after purification, its viability was (90±5)%, attachment efficiency was (86±7)%, the viability of thawed hepatocytes was near to fresh cells. When the thawed hepatocytes were cultivated in gel collagen with culture medium adding epidermal growth factor, the hepatocytes grew in various administrative levels in mixed collagen gel, and bunchy in the sandwich configuration cultures. For up to 10 days' culture, the typical cellular morphological characteristics of cultivated hepatocytes could be observed. The leakage of AST was lower during culture in gel than that in common culture. At the same time, the UN synthesized by cells cultivated in mixed gel collagen was higher than that in other groups.CONCLUSION: Storage in liquid nitrogen can long keep hepatocytes' activities, the concentration of 150 mL/L DMSO is fit for porcine hepatocytes' cryopreservation. Thawed hepatocytes can be cultivated with coliagenous matrix, which provides an environment that more closely resembles that in vivo and maintain the expression of certain liver-specific function of hepatocytes.

  9. Slow Release of Plant Volatiles Using Sol-Gel Dispensers.

    Science.gov (United States)

    Bian, L; Sun, X L; Cai, X M; Chen, Z M

    2014-12-01

    The black citrus aphid, also known as the tea aphid, (Toxoptera aurantii Boyer) attacks economically important crops, including tea (Camellia sinensis (L.) O. Kuntze). In the current study, silica sol-gel formulations were screened to find one that could carry and release C. sinensis plant volatiles to lure black citrus aphids in a greenhouse. The common plant volatile trans-2-hexen-1-al was used as a model molecule to screen for suitable sol-gel formulations. A zNose (Electronic Sensor Technology, Newbury Park, CA) transportable gas chromatograph was used to continuously monitor the volatile emissions. A sol-gel formulation containing tetramethyl orthosilicate and methyltrimethoxysilane in an 8:2 (vol:vol) ratio was selected to develop a slow-release dispenser. The half-life of trans-2-hexen-1-al in the sol-gel dispenser increased slightly with the volume of this compound in the dispenser. Ten different volatiles were tested in the sol-gel dispenser. Alcohols of 6-10 carbons had the longest half-lives (3.01-3.77 d), while esters of 6-12 carbons had the shortest (1.53-2.28 d). Release of these volatiles from the dispensers could not be detected by the zNose after 16 d (cis-3-hexenyl acetate) to 26 d (3,7-dimethylocta-1,6-dien-3-ol). In greenhouse experiments, trans-2-hexen-1-al and cis-3-hexen-1-ol released from the sol-gel dispensers attracted aphids for ≍17 d, and release of these volatiles could not be detected by the zNose after ≍24 d. The sol-gel dispensers performed adequately for the slow release of plant volatiles to trap aphids in the greenhouse.

  10. Gel Scramble: An E-Tool for Teaching Molecular Neuroscience

    Science.gov (United States)

    Grisham, William; Keller, Lani; Schottler, Natalie

    2015-01-01

    In this completely digital teaching module, students interpret the results of two separate procedures: a restriction endonuclease digestion, and a polymerase chain reaction (PCR). The first consists of matching restriction endonuclease digest protocols with images obtained from stained agarose gels. Students are given the sequence of six plasmid cDNAs, characteristics of the plasmid vector, and the endonuclease digest protocols, which specify the enzyme(s) used. Students calculate the expected lengths of digestion products using this information and free tools available on the web. Students learn how to read gels and then match their predicted fragment lengths to the digital images obtained from the gel electrophoresis of the cDNA digest. In the PCR experiment, students are given six cDNA sequences and six sets of primers. By querying NCBI BLAST, students can match the PCR fragments to the lengths of the predicted in silico PCR products. The ruse posed to students is that the gels were inadvertently mislabeled during processing. Although students know the experimental details, they do not know which gel goes with a given restriction endonuclease digest or PCR—they must deduce the answers. Because the gel images are from actual students’ experiments, the data sometimes result from mishandling/mislabeling or faulty protocol execution. The most challenging part of the exercise is to explain these errors. This latter aspect requires students to use critical thinking skills to explain aberrant outcomes. This entire exercise is available in a digital format and downloadable for free at http://mdcune.psych.ucla.edu/modules/gel. PMID:26240527

  11. Alginate gel particles-A review of production techniques and physical properties.

    Science.gov (United States)

    Ching, Su Hung; Bansal, Nidhi; Bhandari, Bhesh

    2017-04-13

    The application of hydrocolloid gel particles is potentially useful in food, chemical, and pharmaceutical industries. Alginate gel particles are one of the more commonly used hydrocolloid gel particles due to them being biocompatible, nontoxic, biodegradable, cheap, and simple to produce. They are particularly valued for their application in encapsulation. Encapsulation in alginate gel particles confers protective benefits to cells, DNA, nutrients, and microbes. Slow release of flavors, minerals, and drugs can also be achieved by encapsulation in gel particles. The particle size and shape of the gel particles are crucial for specific applications. In this review, current methods of producing alginate gel particles will be discussed, taking into account their advantages, disadvantages, scalability, and impact on particle size. The physical properties of alginate gel particles will determine the effectiveness in different application conditions. This review will cover the current understanding of the alginate biopolymer, gelation mechanisms and factors affecting release properties, gel strength, and rheology of the alginate gel particle systems.

  12. Physicochemical and structural properties of composite gels prepared with myofibrillar protein and lard diacylglycerols.

    Science.gov (United States)

    Diao, Xiaoqin; Guan, Haining; Zhao, Xinxin; Diao, Xinping; Kong, Baohua

    2016-11-01

    The objective of this study was to investigate the physicochemical and structural properties of composite gels prepared with porcine myofibrillar protein (MP) and lard, glycerolized lard (GL) or purified glycerolized lard (PGL). The gels prepared with MP and GL or PGL had significantly higher penetration force and water-holding capacity (WHC) than the gel with lard (Pgel, T21 and T22 of the gels that were prepared with GL or PGL moved in the direction of slower relaxation time, which suggests that the water mobility in the gel system was restricted. The presence of lard, GL and PGL did not affect the participating proteins in composite gels. The presence of GL and PGL altered the secondary and tertiary structures of MP in composite gels, which changed the gel properties. In general, the composite gels that were prepared with MP and GL or PGL showed improved gel quality.

  13. THE PHARMACOLOGICAL EFFICACY OF THE EXTEMPORANEOUS GEL DIAVENOL

    Directory of Open Access Journals (Sweden)

    Martynov AV

    2017-03-01

    Full Text Available Introduction. Diavenol - new extemporaneous gel for the treatment of venous ulcers. The gel contains a synergistic combination C. majus quinolizidine alkaloids and riboflavin. Activate tissue regeneration shown previously for riboflavin, and сheleretrin / sanguirythrine. The combination of the alkaloids and riboflavin pharmacologically fully justified. The research aim was to check the mechanism action of the Diavenol gel - through stimulation of the pluripotent cells growth and determination the effectiveness of the gel for wound healing at experimental model in rats. Materials and methods. In a study 128 rats were used, of which 38 - in the pharmacological experiment with a stencil wound healing, and 90 in the experiment to study the influence of gel on CD34 cells amount in the blood in rats with chemically induced immunodeficiency. High immunodeficiency caused a five-fold administration of cyclophosphamide, prednisone and rubomycin. CD34 expression level was determined using flow cytometry FACS Calibur. Results and discussion. Topical skin application the Diavenol gel samples in rats helped to accelerate the regeneration process is about 2 times, as evidenced by the excess of blood parameters in experimental group animals to the 30th day, more than 2 times, while the indicators in the control group animals came to normal values only on the 60th day. Increasing the number of pluripotent cells as well as acceleration of wound regeneration indicates preferential stimulation of stem cell growth in the periphery, rather than an enhancement of bone marrow function. The maximum effect of the Diavenol observed on the 60th day and the restoration of the pluripotent cells physiological level have been observed on the 10th day after the start of Diavenol application. Due to the fact, that the gel was applied to intact skin, we can say that Diavenol had resorptive properties. Treatment of wounds in rats Diavenol gel resulted in a more rapid removal of

  14. Dynamics of Fractal Cluster Gels with Embedded Active Colloids

    Science.gov (United States)

    Szakasits, Megan E.; Zhang, Wenxuan; Solomon, Michael J.

    2017-08-01

    We find that embedded active colloids increase the ensemble-averaged mean squared displacement of particles in otherwise passively fluctuating fractal cluster gels. The enhancement in dynamics occurs by a mechanism in which the active colloids contribute to the average dynamics both directly through their own active motion and indirectly through their excitation of neighboring passive colloids in the fractal network. Fractal cluster gels are synthesized by addition of magnesium chloride to an initially stable suspension of 1.0 μ m polystyrene colloids in which a dilute concentration of platinum coated Janus colloids has been dispersed. The Janus colloids are thereby incorporated into the fractal network. We measure the ensemble-averaged mean squared displacement of all colloids in the gel before and after the addition of hydrogen peroxide, a fuel that drives diffusiophoretic motion of the Janus particles. The gel mean squared displacement increases by up to a factor of 3 for an active to passive particle ratio of 1 ∶20 and inputted active energy—defined based on the hydrogen peroxide's effect on colloid swim speed and run length—that is up to 9.5 times thermal energy, on a per particle basis. We model the enhancement in gel particle dynamics as the sum of a direct contribution from the displacement of the Janus particles themselves and an indirect contribution from the strain field that the active colloids induce in the surrounding passive particles.

  15. Dapsone 7.5% Gel: A Review in Acne Vulgaris.

    Science.gov (United States)

    Al-Salama, Zaina T; Deeks, Emma D

    2017-02-01

    Dapsone 7.5% gel (Aczone(®)) is indicated for the once-daily topical treatment of acne vulgaris in patients aged ≥12 years. Dapsone is a sulfone antibacterial with anti-inflammatory actions, which are thought to be largely responsible for its efficacy in treating acne vulgaris. In two phase III trials of 12 weeks' duration in patients aged ≥12 years with moderate acne vulgaris, once-daily dapsone 7.5% gel reduced acne severity (as per the Global Acne Assessment Score) and lesion counts versus vehicle. The benefits of dapsone 7.5% gel over vehicle were seen as early as week 2 for inflammatory lesion counts, and from week 4 or 8 for other outcomes. Dapsone 7.5% gel was well tolerated, with a low incidence of treatment-related adverse events, with the majority of adverse events being administration-site related and mild or moderate in severity. Thus, dapsone 7.5% gel is an effective and well tolerated option for the topical treatment of acne vulgaris in patients aged ≥12 years, with the convenience of once-daily application.

  16. Comparative gel-based phosphoproteomics in response to signaling molecules

    KAUST Repository

    Marondedze, Claudius

    2013-09-03

    The gel-based proteomics approach is a valuable technique for studying the characteristics of proteins. This technique has diverse applications ranging from analysis of a single protein to the study of the total cellular proteins. Further, protein quality and to some extent distribution can be first assessed by means of one-dimensional gel electrophoresis and then more informatively, for comparative analysis, using the two-dimensional gel electrophoresis technique. Here, we describe how to take advantage of the availability of fluorescent dyes to stain for a selective class of proteins on the same gel for the detection of both phospho- and total proteomes. This enables the co-detection of phosphoproteins as well as total proteins from the same gel and is accomplished by utilizing two different fluorescent stains, the ProQ-Diamond, which stains only phosphorylated proteins, and Sypro Ruby, which stains the entire subset of proteins. This workflow can be applied to gain insights into the regulatory mechanisms induced by signaling molecules such as cyclic nucleotides through the quantification and subsequent identification of responsive phospho- and total proteins. © Springer Science+Business Media New York 2013.

  17. Ferrocene Derivative Mediator Bonded Sol-gel Membrane Glucose Biosensor

    Institute of Scientific and Technical Information of China (English)

    XUAN, Guang-Shan; KIM, Moon-Chang; HER, Dae-Sung; LEE, Heung-Lark

    2006-01-01

    The sol-gel derived glucose biosensor was developed, and the sol-gel membrane was organically modified by N-(3-triethoxysilylpropyl)-ferrocenylmethylamine (FcSi) as sol-gel precursor to make electrochemical biosensor.The structure of biosensor was sol-gel/FcSi+Gox/GC type (glucose oxidase, Gox). The ferrocene mediator was chemically immobilized to the silane network, and Gox was entrapped to the sol-gel glass network. Therefore,these structures prevented mediator leakage and retained the enzyme activity. Additionally, pH of electrolyte, temperature effects, and interference of positive substances with biosensor were investigated. And the electrochemical performance of biosensor was studied by amperometry. The results indicated that the linear range, detection limit,and response slope of biosensor was 2.00× 10-4-1.57× 10-3 mol·L-1, 2.0× 10-4 mol·L-1 and 5.06× 105 nA·mol-1 · L, respectively.

  18. Thermal relaxation and mechanical relaxation of rice gel

    Institute of Scientific and Technical Information of China (English)

    丁玉琴; 赵思明; 熊善柏

    2008-01-01

    Rice gel was prepared by simulating the production processes of Chinese local rice noodles,and the properties of thermal relaxation and mechanical relaxation during gelatinization were studied by differential scanning calorimetry(DSC) measurement and dynamic rheometer.The results show that during gelatinization,the molecular chains of rice starch undergo the thermal relaxation and mechanical relaxation.During the first heating and high temperature holding processes,the starch crystallites in the rice slurry melt,and the polymer chains stretch and interact,then viscoelastic gel forms.The cooling and low temperatures holding processes result in reinforced networks and decrease the viscoelasticity of the gel.During the second heating,the remaining starch crystallites further melt,the network is reinforced,and the viscoelasticity increases.The viscoelasticity,the molecular conformation and texture of the gel are adjusted by changing the temperature,and finally construct the gel with the textural characteristics of Chinese local rice noodle.

  19. Development of the ambroxol gels for enhanced transdermal delivery.

    Science.gov (United States)

    Cho, Cheong-Weon; Choi, Jun-Shik; Shin, Sang-Chul

    2008-03-01

    Ambroxol is an expectoration improver and mucolytic agent that has been used to treat acute and chronic disorders. However, ambroxol needs to be administered percutaneously in order to avoid systemic adverse effects, such as headache, drowsiness, dizziness, and insomnia, which can occur after oral administration. The aim of this study was to develop a gel preparation containing a permeation enhancer to enhance the delivery of ambroxol. The ambroxol gels were prepared using hydroxypropyl methylcellulose (HPMC) and poloxamer 407. The release characteristics of the drug from the gels were examined according to the receptor medium, drug concentration, and temperature. The rate of drug permeation into the skin was enhanced by incorporating various enhancers such as the ethylene glycols, the propylene glycols, the glycerides, the non-ionic surfactants, and the fatty acids into the gels. The permeation study through mouse skin was examined at 37 C. The rate of drug release increased with increasing drug concentration and temperature. Among the enhancers used, propylene glycol mono caprylate showed the best enhancing effects. The estimated activation energy of release (Ea), which was calculated from the slope of a log P versus 1000/T plot, was 14.80, 14.22, 13.91, and 12.46 kcal/mol for ambroxol loading doses of 2, 3, 4, and 5%, respectively. The results of this study show that the gel preparation of ambroxol containing a permeation enhancer could be developed for the enhanced transdermal delivery of ambroxol.

  20. Preparation of silica by sol-gel method using formamide

    Directory of Open Access Journals (Sweden)

    R.F.S. Lenza

    2001-07-01

    Full Text Available In this work we obtained microporous and mesoporous silica gels by sol-gel processing. Tetraethylortosilicate (TEOS was used as precursor. Nitric acid and hydrofluoric acid were used as catalysts. In order to study the affect of formamide as drying additive, we used a molar ratio alkoxide/formamide of 1/1. The performance of formamide in obtaining crack-free gels was evaluated through monolithicity measurements. The structural evolution occurring in the interconnected network of the gels during thermal treatment was monitored by Fourier transform infrared spectroscopy (FTIR, shrinkage and density measurements and nitrogen gas sorption. We noted that in the presence of formamide, the Si-O-Si bonds are stronger and belong to a more cross-linked structure. The samples obtained in the presence of formamide have larger pore volume and its pore structure is in the range of mesoporosity. The samples obtained without additive are microporous. Formamide allowed the preparation of crack-free silica gels stabilized at high temperatures.

  1. The effects of autologous platelet gel on wound healing.

    Science.gov (United States)

    Henderson, Jenifer L; Cupp, Craig L; Ross, E Victor; Shick, Paul C; Keefe, Michael A; Wester, Derin C; Hannon, Timothy; McConnell, Devin

    2003-08-01

    Laser resurfacing techniques have become a popular means of achieving rejuvenation of damaged skin. Interest is great in attempting to speed re-epithelialization and healing so that patients can return to their normal activities as quickly as possible. Previous studies have demonstrated that wounds heal more quickly when they are covered and kept moist than when they are left open to the air. Until now, no study has been conducted to investigate whether the healing process of a superficial skin burn might be accelerated by the use of an autologous platelet gel as a biologic dressing. Our study of five pigs showed that autologous platelet gel can influence wound healing by stimulating an intense inflammatory process that leads to highly significant increases in the production of extracellular matrices and granulation tissue. The platelet gel accelerated vascular ingrowth, increased fibroblastic proliferation, and accelerated collagen production. However, the gel did not appear to accelerate re-epithelialization. The aggressive production of granulation tissue and the acceleration of collagen production might mean that autologous platelet gel will have a future role in the treatment of burns because the highly vascularized bed it helps create should promote the success of skin grafting in patients with deep partial-thickness and full-thickness burns.

  2. Performance Evaluation and Experimental Studies on Metallised Gel Propellants

    Directory of Open Access Journals (Sweden)

    T. L. Varghese

    1999-01-01

    Full Text Available Metallised gel propellants offer higher specific impulse and volumetric loading, reduced vaporisation loss, spillage and slosh problems and easy storage in comparison to the conventional liquid propellants. Theoretical performance analysis of gel propellant containing Al in unsymmetrical dimethyl hydrazine-dinitrogen tetroxide (UDMH-N/sub 2/O/sub 4} system shows peak Isp (vacuum condition of 316.7 s and 318.3 s at oxidiser/fuel (O/f ratios of 1.5 and 1.0, respectively for 30 per cent and 40 per cent UDMH-Al gel propellants, under standard conditions. The effect of other parameters like area ratio and chamber pressure on performance has been brought out in view of mission oriented applications. Aluminium has been found to be a better choice over magnesium in metallised gel propellants. Experimental studies on UDMH gellation using propellant grade (15 micrometerand pyrotechnic grade (1.5 micrometerAl in 500g batch level show that gellant(methyl cellulose concentration could be reduced by 50 percent using pyrotechnic grade Al. The pseudoplastic-thixotropic behaviour, flow rate through die holes, burst pressure tests and bulk density are studied. UDMH -25 to 30 per cent Al gels with both grades of Al are found to be stable, pseudoplastic (shear thinning and thixotropic (time-dependent shear thinning, but their flow pattern through die holes differ in nature.

  3. Posing for a picture: vesicle immobilization in agarose gel

    Science.gov (United States)

    Lira, Rafael B.; Steinkühler, Jan; Knorr, Roland L.; Dimova, Rumiana; Riske, Karin A.

    2016-05-01

    Taking a photo typically requires the object of interest to stand still. In science, imaging is potentiated by optical and electron microscopy. However, living and soft matter are not still. Thus, biological preparations for microscopy usually include a fixation step. Similarly, immobilization strategies are required for or substantially facilitate imaging of cells or lipid vesicles, and even more so for acquiring high-quality data via fluorescence-based techniques. Here, we describe a simple yet efficient method to immobilize objects such as lipid vesicles with sizes between 0.1 and 100 μm using agarose gel. We show that while large and giant unilamellar vesicles (LUVs and GUVs) can be caged in the pockets of the gel meshwork, small molecules, proteins and micelles remain free to diffuse through the gel and interact with membranes as in agarose-free solutions, and complex biochemical reactions involving several proteins can proceed in the gel. At the same time, immobilization in agarose has no adverse effect on the GUV size and stability. By applying techniques such as FRAP and FCS, we show that the lateral diffusion of lipids is not affected by the gel. Finally, our immobilization strategy allows capturing high-resolution 3D images of GUVs.

  4. Rheology of the gel formed in the California Mastitis Test.

    Science.gov (United States)

    Verbeek, C Johan R; Xia, Stephen S; Whyte, David

    2008-11-01

    The California Mastitis Test has previously been adapted for use in an inline, cow-side sensor and relies on the fact that the viscosity of the gel formed during the test is proportional to the somatic cell concentration. In this paper, the use of capillary and rotational viscometry was compared in light of the expected rheology of the gel formed during the test. It was found that the gel is non-Newtonian, but the initial phase of viscosity increase was not due to shear dependence, but rather due to the gelation reaction. The maximum apparent viscosity of the gel was shear dependent while the time it took to reach the maximum was not truly shear dependent, but was rather dependent on the degree of mixing during gelation. This was confirmed by introducing a delay time prior to viscosity measurement, in both capillary and rotational viscometry. It was found that by mixing the reagent and infected milk, then delaying viscosity measurement for 30 s, shortened the time it took to reach maximum viscosity by more than 60 s. The maximum apparent viscosity, however, was unaffected. It was found that capillary viscometry worked well to correlate relative viscosity with somatic cell count, but that it was sensitive to the reagent concentration. It can therefore be deduced that the rheology of the gel is complicated not only by it being non-Newtonian, but also by the strong dependence on test conditions. These make designing a successful sensor much more challenging.

  5. Transient, nonlinear rheology of reversible colloidal gels by dynamic simulation

    Science.gov (United States)

    Landrum, Benjamin; Russel, William; Zia, Roseanna

    2014-11-01

    We study the nonlinear rheology of reversible colloidal gels via dynamic simulation as they undergo age- and flow-induced structural evolution, with a view toward understanding and predicting transient behaviors such as multi-step and delayed yield. The gel is formed from 750,000 Brownian spheres interacting via hard-sphere repulsion and O(kT) short-range attraction, where thermal fluctuations are strong enough to allow continued structural rearrangement in the absence of flow. During startup of imposed strain rate, the transition to steady state is characterized by one or more ``overshoots'' in the stress which suggest initial yield, formation of a stronger gel, and subsequent yield of the new gel. When subjected to step-shear stress, the microstructure undergoes limited creep, followed by viscous flow. This macroscopic ``delayed flow'' is consistent with previously proposed models of competition between breakage and formation of particle bonds among static load-bearing structures. Our findings suggest, however, that the load-bearing structures evolve, and that the gel's resistance to delayed failure depends upon this structural evolution and reinforcement. We put forth a micro-mechanical model of stress gradient-driven particle transport that captures this macroscopic behavior.

  6. Pulsed-field gel electrophoresis of bacterial chromosomes.

    Science.gov (United States)

    Mawer, Julia S P; Leach, David R F

    2013-01-01

    The separation of fragments of DNA by agarose gel electrophoresis is integral to laboratory life. Nevertheless, standard agarose gel electrophoresis cannot resolve fragments bigger than 50 kb. Pulsed-field gel electrophoresis is a technique that has been developed to overcome the limitations of standard agarose gel electrophoresis. Entire linear eukaryotic chromosomes, or large fragments of a chromosome that have been generated by the action of rare-cutting restriction endonucleases, can be separated using this technique. As a result, pulsed-field gel electrophoresis has many applications, from karyotype analysis of microbial genomes, to the analysis of chromosomal strand breaks and their repair intermediates, to the study of DNA replication and the identification of origins of replication. This chapter presents a detailed protocol for the preparation of Escherichia coli chromosomal DNA that has been embedded in agarose plugs, digested with the rare-cutting endonuclease NotI, and separated by contour-clamped homogeneous field electrophoresis. The principles in this protocol can be applied to the separation of all fragments of DNA whose size range is between 40 kb and 1 Mb.

  7. Nanoparticle solutions as adhesives for gels and biological tissues.

    Science.gov (United States)

    Rose, Séverine; Prevoteau, Alexandre; Elzière, Paul; Hourdet, Dominique; Marcellan, Alba; Leibler, Ludwik

    2014-01-16

    Adhesives are made of polymers because, unlike other materials, polymers ensure good contact between surfaces by covering asperities, and retard the fracture of adhesive joints by dissipating energy under stress. But using polymers to 'glue' together polymer gels is difficult, requiring chemical reactions, heating, pH changes, ultraviolet irradiation or an electric field. Here we show that strong, rapid adhesion between two hydrogels can be achieved at room temperature by spreading a droplet of a nanoparticle solution on one gel's surface and then bringing the other gel into contact with it. The method relies on the nanoparticles' ability to adsorb onto polymer gels and to act as connectors between polymer chains, and on the ability of polymer chains to reorganize and dissipate energy under stress when adsorbed onto nanoparticles. We demonstrate this approach by pressing together pieces of hydrogels, for approximately 30 seconds, that have the same or different chemical properties or rigidities, using various solutions of silica nanoparticles, to achieve a strong bond. Furthermore, we show that carbon nanotubes and cellulose nanocrystals that do not bond hydrogels together become adhesive when their surface chemistry is modified. To illustrate the promise of the method for biological tissues, we also glued together two cut pieces of calf's liver using a solution of silica nanoparticles. As a rapid, simple and efficient way to assemble gels or tissues, this method is desirable for many emerging technological and medical applications such as microfluidics, actuation, tissue engineering and surgery.

  8. Method for preparing hydrous iron oxide gels and spherules

    Science.gov (United States)

    Collins, Jack L.; Lauf, Robert J.; Anderson, Kimberly K.

    2003-07-29

    The present invention is directed to methods for preparing hydrous iron oxide spherules, hydrous iron oxide gels such as gel slabs, films, capillary and electrophoresis gels, iron monohydrogen phosphate spherules, hydrous iron oxide spherules having suspendable particles homogeneously embedded within to form composite sorbents and catalysts, iron monohydrogen phosphate spherules having suspendable particles of at least one different sorbent homogeneously embedded within to form a composite sorbent, iron oxide spherules having suspendable particles homogeneously embedded within to form a composite of hydrous iron oxide fiber materials, iron oxide fiber materials, hydrous iron oxide fiber materials having suspendable particles homogeneously embedded within to form a composite, iron oxide fiber materials having suspendable particles homogeneously embedded within to form a composite, dielectric spherules of barium, strontium, and lead ferrites and mixtures thereof, and composite catalytic spherules of barium or strontium ferrite embedded with oxides of Mg, Zn, Pb, Ce and mixtures thereof. These variations of hydrous iron oxide spherules and gel forms prepared by the gel-sphere, internal gelation process offer more useful forms of inorganic ion exchangers, catalysts, getters, dielectrics, and ceramics.

  9. Formulation and Evaluation of Ethosomal Topical Gels of Etoricoxib

    Directory of Open Access Journals (Sweden)

    S. Indira

    2015-11-01

    Full Text Available The aim of the current investigation was to develop an Etoricoxib loaded ethosomal gel for better anti-inflammatory activity by sustaining the drug release and reduces adverse effects. Ethosomes are lipid vesicular carriers containing ethanol which provides better penetration of drug into the skin. Etoricoxib is a non steroidal anti-inflammatory drug which has shown many side effects when used orally. Etoricoxib ethosomes were prepared by hot method using soya lecithin, ethanol, cholesterol and drug in different ratios. They were evaluated for particle size, entrapment efficiency and in vitro drug release. Optimized ethosomal formulation showed an entrapment efficiency of 88.09% and drug release of 90.4% in 8hrs. The optimized formulation was incorporated into gel using carbopol 934, HPMC K4M; HPMC K100.Optimized ethosomal gel (EG3 showed the drug content of 93.36% and drug release of 75.5% in 8hrs.Ex Vivo studies were performed for the optimized gel and the drug release was found to be 73.5%in 8hrs respectively. Stability studies indicated that optimized formulations were stable for a period of 3months under refrigerated conditions. It was concluded that Etoricoxib loaded ethosomal gels were successfully formulated to increase the efficacy and reduce its side effects.

  10. Hierarchical tubular structures grown from the gel/liquid interface.

    Science.gov (United States)

    Steenbjerg Ibsen, Casper Jon; Mikladal, Bjørn Fridur; Bjørnholt Jensen, Uffe; Birkedal, Henrik

    2014-12-01

    Three dimensional hierarchical materials are widespread in nature but are difficult to synthesize by using self-assembly/organization. Here, we employ a gel-liquid interface to obtain centimeter-long ∼100 μm diameter tubes with complex mineral wall structures that grow from the interface into solution. The gel, made from gelatin, is loaded with metal chloride salt, whereas the solution is a high pH anion source. Tubes were obtained with a range of cations (Ca(2+) , Sr(2+) , Ba(2+) , Cu(2+) , and Zn(2+) ) and anions (CO3 (2-) and PO4 (3-) ). The crystalline phases found in the tube walls corresponded to expectations from solution chemistries and phase solubilities. The growth mechanism is found to be akin to that of chemical gardens. The divalent cations modify the strength of the gelatin gel in a manner that involves not only simple electrostatic screening, but also ion-specific effects. Thus, tubes were not obtained for those ions and/or concentrations that significantly changed the gel's mechanical structure. At high Cu(2+) loading, for example, vertical convection bands, not Liesegang bands, were observed in the gels.

  11. Sol-gel derived contamination resistant antireflective coatings

    Science.gov (United States)

    Shen, Jun; Liu, Yuan; Wu, Guangming; Zhou, Bin; Zhang, Zhihua; Zhu, Yumei

    2011-02-01

    Silica-based sol-gel antireflective (AR) optical coatings are critical components for high peak power laser systems. It is well known that water vapor and volatile organic compounds in both the laser bay and target bay environments will reduce the antireflective efficiency and laser-damage resistance of the sol-gel AR coating. In this study, alkylation with organosilanes in the vapor state was investigated. Sol-gel AR coatings were vapor-phase treated with hexamethyldisilazane (HMDS) and trimethylchlorosilane (TMCS) at room temperature, and the resulting post-treated sol-gel AR coatings were tested for their resistance to contamination by a series of volatile organic compounds. Contact angle measurements were taken to discern the degree of silanization. After the vapor treatment of sol-gel AR coatings with organosilanes, the spectral performance of the coatings were analyzed by spectrophotometer, both before and after the exposure to volatile organic compounds. It is found that the coatings treated with ammonia and HMDS show a better contamination resistant capability. After being contaminated 70 hours with hexane, the transmittance of the coatings presents no obvious decrease. And the vapor treatment produces an increase in their damage threshold at 1064 nm (10ns pulse width) as compared to untreated control samples.

  12. Uptake and Recovery of Lead by Agarose Gel Polymers

    Directory of Open Access Journals (Sweden)

    Anurag Pandey

    2009-01-01

    Full Text Available Problem statement: The uptake and recovery of lead ions were investigated by using agarose gel polymers. Approach: The experimental results showed that the agarose gel were effective in removing Pb (II from solution. Biosorption equilibrium was approached within 4 h. Pseudo second-order was applicable to all the sorption data over the entire time range. Results: The sorption data conformed well to both the Langmuir and the Freundlich isotherm model. The maximum adsorption capacity (qmax onto agarose gel was 115 mg g-1 for Pb (II. The maximum uptake of metal ions was obtained at pH 2.0. At temperature 35°C, the biosorption of metal ions was found to be highest, with increase or decrease in temperature resulted in a decrease in the metal ions uptake capacity. Conclusion: Elution experiments were carried out to remove Pb (II ions from loaded agarose gel and the bound metal ions could be eluted successfully using 0.1 M EDTA solution. The results suggest that agarose gel can be used as a biosorbent for an efficient removal of Pb(II ions from aqueous solution.

  13. Absorbability of bulk sol-gel bioactive glasses

    Energy Technology Data Exchange (ETDEWEB)

    Hamadouche, M.; Meunier, A.; Blanchat, C.; Sedel, L. [Paris-7 Univ. (France). Lab. de Recherches Orthopediques; Greenspan, D.C.; Zhong, J.P.; Torre, G.P. la [US Biomaterials Corp., Alachua, FL (United States)

    2001-07-01

    Melt-derived bioactive glasses have been used with success in various clinical applications for over 10 years. Recently, particles of sol-gel derived bioactive glasses with an initial high specific area have exhibited high osteoconductive properties, but also a significant degradability. In this work, we explored the in-vivo bioactivity and degradability of bulk sol-gel derived glasses. Two sol-gel compositions (58S and 77S Bioglass) were used. Bulk 45S5 were used as a control. Both sol-gel derived demonstrated similar osteoconductive properties to 45S% Bioglass. In addition, absorbability was observed for sol-gel derived glasses after 12 weeks of implantation. Total absorption reached 40% after 52 weeks. No degradation could be measured in the case of 45S5 melt derived Bioglass. The degradation process was highly time dependent as demonstrated by regression analysis. New bone formation was found to fill in areas that had been resorbed similar to bone remodeling. New bone was found to fill in areas that had been absorbed, similar to natural bone remodeling. This absorbability can be assumed to be at least partially related to an osteoclastic resorption, as viable osteoclasts-like cells were found directly in contact with the glass surfaces. (orig.)

  14. Kefiran-alginate gel microspheres for oral delivery of ciprofloxacin.

    Science.gov (United States)

    Blandón, Lina M; Islan, German A; Castro, Guillermo R; Noseda, Miguel D; Thomaz-Soccol, Vanete; Soccol, Carlos R

    2016-09-01

    Ciprofloxacin is a broad-spectrum antibiotic associated with gastric and intestinal side effects after extended oral administration. Alginate is a biopolymer commonly employed in gel synthesis by ionotropic gelation, but unstable in the presence of biological metal-chelating compounds and/or under dried conditions. Kefiran is a microbial biopolymer able to form gels with the advantage of displaying antimicrobial activity. In the present study, kefiran-alginate gel microspheres were developed to encapsulate ciprofloxacin for antimicrobial controlled release and enhanced bactericidal effect against common pathogens. Scanning electron microscopy (SEM) analysis of the hybrid gel microspheres showed a spherical structure with a smoother surface compared to alginate gel matrices. In vitro release of ciprofloxacin from kefiran-alginate microspheres was less than 3.0% and 5.0% at pH 1.2 (stomach), and 5.0% and 25.0% at pH 7.4 (intestine) in 3 and 21h, respectively. Fourier transform infrared spectroscopy (FTIR) of ciprofloxacin-kefiran showed the displacement of typical bands of ciprofloxacin and kefiran, suggesting a cooperative interaction by hydrogen bridges between both molecules. Additionally, the thermal analysis of ciprofloxacin-kefiran showed a protective effect of the biopolymer against ciprofloxacin degradation at high temperatures. Finally, antimicrobial assays of Escherichia coli, Klebsiella pneumoniae, Pseudomonas aeruginosa, Salmonella typhymurium, and Staphylococcus aureus demonstrated the synergic effect between ciprofloxacin and kefiran against the tested microorganisms. Copyright © 2016 Elsevier B.V. All rights reserved.

  15. Nanoparticles laden in situ gel for sustained ocular drug delivery

    Directory of Open Access Journals (Sweden)

    Himanshu Gupta

    2013-01-01

    Full Text Available Proper availability of drug on to corneal surface is a challenging task. However, due to ocular physiological barriers, conventional eye drops display poor ocular bioavailability of drugs (< 1%. To improve precorneal residence time and ocular penetration, earlier our group developed and evaluated in situ gel and nanoparticles for ocular delivery. In interest to evaluate the combined effect of in situ gel and nanoparticles on ocular retention, we combined them. We are the first to term this combination as "nanoparticle laden in situ gel", that is, poly lactic co glycolic acid nanoparticle incorporated in chitosan in situ gel for sparfloxacin ophthalmic delivery. The formulation was tested for various physicochemical properties. It showed gelation pH near pH 7.2. The observation of acquired gamma camera images showed good retention over the entire precorneal area for sparfloxacin nanoparticle laden in situ gel (SNG as compared to marketed formulation. SNG formulation cleared at a very slow rate and remained at corneal surface for longer duration as no radioactivity was observed in systemic circulation. The developed formulation was found to be better in combination and can go up to the clinical evaluation and application.

  16. Structural evolution and stability of sol-gel biocatalysts

    Energy Technology Data Exchange (ETDEWEB)

    Rodgers, L.E. [School of Biotechnology and Biomolecular Sciences, University of New South Wales, NSW 2052 (Australia)]. E-mail: ler@ansto.gov.au; Knott, R.B. [Australian Nuclear Science and Technology Organisation, PMB 1, Menai, NSW 2234 (Australia); Holden, P.J. [Australian Nuclear Science and Technology Organisation, PMB 1, Menai, NSW 2234 (Australia); Pike, K.J. [Australian Nuclear Science and Technology Organisation, PMB 1, Menai, NSW 2234 (Australia); Hanna, J.V. [Australian Nuclear Science and Technology Organisation, PMB 1, Menai, NSW 2234 (Australia); Foster, L.J.R. [School of Biotechnology and Biomolecular Sciences, University of New South Wales, NSW 2052 (Australia); Bartlett, J.R. [Australian Nuclear Science and Technology Organisation, PMB 1, Menai, NSW 2234 (Australia)

    2006-11-15

    Immobilisation strategies for catalytic enzymes are important as they allow recovery and reuse of the biocatalysts. In this work, sol-gel matrices have been used to immobilise Candida antarctica lipase B (CALB), a commonly used industrial enzyme. The sol-gel bioencapsulate is produced through fluoride-catalysed hydrolysis of mixtures of tetramethylorthosilicate (TMOS) and methyltrimethoxysilane (MTMS) in the presence of CALB, yielding materials with controlled pore sizes and surface chemistries. Sol-gel matrices prolong the catalytic life and enhance the activity of CALB, although the molecular basis for this effect has yet to be elucidated due to the limitations of analytical techniques applied to date. Small angle neutron scattering (SANS) allows such multi-component systems to be characterised through contrast matching. In the sol-gel bioencapsulate system at the contrast match point for silica, residual scattering intensity is due to the CALB and density fluctuations in the matrix. A SANS contrast variation series found the match point for the silica matrix, both with and without enzyme present, to be around 35%. The model presented here proposes a mechanism for the interaction between CALB and the surrounding sol-gel matrix, and the observed improvement in enzyme activity and matrix strength. Essentially, the inclusion of CALB modulates silicate speciation during evolution of the inorganic network, leading to associated variations in SANS contrast. The SANS protocol developed here may be applied more generally to other encapsulated enzyme sys0010te.

  17. Gel-gel phase separation within milk sphingomyelin domains revealed at the nanoscale using atomic force microscopy.

    Science.gov (United States)

    Guyomarc'h, Fanny; Chen, Maohui; Et-Thakafy, Oumaima; Zou, Shan; Lopez, Christelle

    2017-05-01

    The milk sphingomyelin (MSM) is involved in the formation of ordered lipid domains in the biological milk fat globule membrane (MFGM), where it accounts for about 30%wt of the polar lipids. Moreover, MSM exhibits a large variety in saturated acyl chain lengths (from C16:0 to C24:0-SM) compared to other natural sphingomyelins, which may impact the packing of MSM molecular species in the gel phase domains and the topography of the MFGM. To investigate this, supported lipid bilayers of synthetic sphingomyelins or of MSM-containing mixtures, including a MFGM polar lipid extract, were imaged at temperatures below the Tm of MSM (i.e. gel phase) in hydrated conditions using atomic force microscopy. In all compositions containing MSM, the MSM-rich gel phase domains exhibited lower and upper height levels H, interpreted as two distinct gel phases with ∆H~0.5-1.1nm. Two (lower and upper) gel phases were also found for pure C24:0-SM bilayers or for bilayers of a C16:0-SM/C24:0-SM equimolar mixture, while C16:0-SM bilayers were uniformly flat and less thick than C24:0-SM bilayers. The upper gel phase of MSM-containing bilayers was interpreted as mixed interdigitated C24:0-SM molecules, while the lower gel phase was attributed both to fully interdigitated C24:0-SM molecules and non-interdigitated C16:0-SM molecules. These results show that the composition of natural sphingomyelins, inducing a mismatch between the d18:1 sphingosine and the acyl chains, is important in both the internal organization and the topography of biological membranes, especially that of the MFGM. This organization could be involved in specific biological functions, e.g. the insertion of proteins.

  18. The effect of 1% chlorhexidine gel and 0.12% dentifrice gel on plaque accumulation: a 3-day non-brushing model

    NARCIS (Netherlands)

    D.E. Slot; N.A.M. Rosema; N.L. Hennequin-Hoenderdos; P.A. Versteeg; U. van der Velden; G.A. van der Weijden

    2010-01-01

    Aim:  The purpose of the study was to compare the effects of four treatments on ‘de novo’ plaque accumulation. Treatments included tray application of 1% chlorhexidine gel (CHX-Gel), 0.12% chlorhexidine dentifrice-gel (CHX-DFG), a regular dentifrice (RDF) tray application, or 0.2% chlorhexidine mout

  19. [Tranexamic acid gel in patients treated with oral anticoagulants].

    Science.gov (United States)

    Ripollés-de Ramón, Jorge; Muñoz-Corcuera, Marta; Bravo-Llatas, Carmen; Bascones-Martínez, Antonio

    2014-12-09

    Patients treated with oral anticoagulants have increased susceptibility to bleeding, and therefore any surgical medical procedure and especially oral surgery requires a therapeutic approach that minimizes bleeding effects in these patients. The working hypothesis was based on studies of local application of tranexamic acid after maxillofacial interventions as effective therapeutic alternative for the prevention and control of bleeding. The aim was to assess the effectiveness of the application of a gel solution tranexamic acid after tooth extraction in anticoagulated patients in terms of healing time and degree of healing. The results indicate that application of tranexamic acid gel is very effective for consistency and maintenance in the place of action and shows its efficacy as a procoagulant material. The application of a gel solution of tranexamic acid in oral anticoagulants patients ameliorates healing time and the bleeding time within the first 48-72 h. Copyright © 2013 Elsevier España, S.L.U. All rights reserved.

  20. Ionic conductivity through thermoresponsive polymer gel: ordering matters.

    Science.gov (United States)

    Soni, Saurabh S; Fadadu, Kishan B; Gibaud, Alain

    2012-01-10

    Thermoreversible polymer gel has been prepared using PEO-PPO-PEO block copolymer (Pluronic F77) which self-assembles into different microcrystalline phases like cubic, 2D-hexagonal, and lamellar. Addition of electrolyte (LiI/I(2)) converts the gel into a polymer gel electrolyte (PGE) which exhibits microphase-dependent ionic conductivity. The crystalline phases have been identified by SAXS as a function of the polymer concentration. It is found that the optimum value for the ionic conductivity (≈1 × 10(-3) S x cm(-1)) is achieved in the Im3m phase due to faster diffusion of ions through the 3D-interconnected micellar nanochannels. This fact is further supported by FTIR study, ionic transference number, and diffusion coefficient measurements.

  1. Gel phase formation in dilute triblock copolyelectrolyte complexes

    Energy Technology Data Exchange (ETDEWEB)

    Srivastava, Samanvaya; Andreev, Marat; Levi, Adam E.; Goldfeld, David J.; Mao, Jun; Heller, William T.; Prabhu, Vivek M.; de Pablo, Juan J.; Tirrell, Matthew V.

    2017-02-23

    Assembly of oppositely charged triblock copolyelectrolytes into phase-separated gels at low polymer concentrations (<1% by mass) has been observed in scattering experiments and molecular dynamics simulations. Here we show that in contrast to uncharged, amphiphilic block copolymers that form discrete micelles at low concentrations and enter a phase of strongly interacting micelles in a gradual manner with increasing concentration, the formation of a dilute phase of individual micelles is prevented in polyelectrolyte complexation-driven assembly of triblock copolyelectrolytes. Gel phases form and phase separate almost instantaneously on solvation of the copolymers. Furthermore, molecular models of self-assembly demonstrate the presence of oligo-chain aggregates in early stages of copolyelectrolyte assembly, at experimentally unobservable polymer concentrations. Our discoveries contribute to the fundamental understanding of the structure and pathways of complexation-driven assemblies, and raise intriguing prospects for gel formation at extraordinarily low concentrations, with applications in tissue engineering, agriculture, water purification and theranostics.

  2. Liquid jet rebound upon impact on a soft gel

    CERN Document Server

    Daniel, Dan; Brenner, Michael; Aizenberg, Joanna

    2016-01-01

    A liquid jet can stably bounce off a sufficiently soft gel, by following the contour of the dimple created due to pressure upon impact. This phenomenon is relatively insensitive to the wetting properties of the liquid and was observed for different liquids over a wide range of surface tensions, $\\gamma$ = 24-72 mN/m. In contrast, other jet rebound phenomena are typically sensitive to $\\gamma$: jet rebound off a hard solid (e.g. superhydrophobic surface) or another liquid is possible only for high and low $\\gamma$ liquids respectively. This is because an air layer must exist between the two interfaces. For a soft gel, no air layer is necessary and jet rebound remains stable even when there is direct liquid-gel contact.

  3. Stabilization of polymer gels against divalent ion-induced syneresis

    Energy Technology Data Exchange (ETDEWEB)

    Albonico, Paola; Lockhart, Thomas P. [Eniricerche SpA, San Donato, Milan (Italy)

    1997-07-15

    Polymer solutions and polymer gels are unstable to extended ageing in divalent cation-rich brines at elevated temperature. This paper shows that low-molecular-weight compounds that complex strongly with Ca{sup 2+} and Mg{sup 2+} are capable of neutralizing their destabilizing influence on polymer solubility and of inhibiting the syneresis of crosslinked acrylamide polymer gels in hard brines. The solubility of the inhibitor-divalent ion complexes formed in hard brine at elevated temperature have also been examined. The results obtained offer the possibility to extend significantly the upper temperature limit for the use of polyacrylamides and acrylamide copolymers in brines in both polymer flooding and polymer gel treatments

  4. Antimicrobial efficacy of an indigenously prepared caries removing gel.

    Science.gov (United States)

    Subramaniam, Priya; Gilhotra, K

    2011-01-01

    The aim of this study was to assess the anti-microbial efficacy of an indigenously prepared caries removing gel, in primary molars. Twenty teeth with broad occlusal cavitated lesions that fulfilled the clinical and radiographic criteria formed the study group. These teeth were subjected to chemomechanical method of caries removal, using an indigenously prepared caries removing gel. Prior to and following caries removal, the dentin samples were analyzed for total viable count and lactobacilli count. The percentage of reduction in the total viable count was 92.4% and in the lactobacilli count it was 94.1%, which was statistically highly significant. Removal of carious tissue with a caries removing gel, a natural plant extract, proved to be efficient, easy to perform, and comfortable for the patient.

  5. Manufacture of Regularly Shaped Sol-Gel Pellets

    Science.gov (United States)

    Leventis, Nicholas; Johnston, James C.; Kinder, James D.

    2006-01-01

    An extrusion batch process for manufacturing regularly shaped sol-gel pellets has been devised as an improved alternative to a spray process that yields irregularly shaped pellets. The aspect ratio of regularly shaped pellets can be controlled more easily, while regularly shaped pellets pack more efficiently. In the extrusion process, a wet gel is pushed out of a mold and chopped repetitively into short, cylindrical pieces as it emerges from the mold. The pieces are collected and can be either (1) dried at ambient pressure to xerogel, (2) solvent exchanged and dried under ambient pressure to ambigels, or (3) supercritically dried to aerogel. Advantageously, the extruded pellets can be dropped directly in a cross-linking bath, where they develop a conformal polymer coating around the skeletal framework of the wet gel via reaction with the cross linker. These pellets can be dried to mechanically robust X-Aerogel.

  6. Turnbull Blue Gel (TBG) evaluation as optical dosimeter

    Science.gov (United States)

    Borguezan Neto, E.; Batistuti, M. R.; Pavoni, J. F.; Bachmann, L.

    2017-05-01

    The radiochromic Turnbull Blue Gel (TBG) is sensitive to X- and γ-rays. When exposed to high-energy radiation, TBG can simulate biological tissues, so this gel has potential use in ionizing radiation dosimetry. After irradiation, the yellow TBG changes to the blue Turnbull Blue dye. This work aims to evaluate how TBG responds to exposure to ultraviolet, visible, and infrared radiation from the sun. The gel was irradiated with a solar simulator, which sensitized TBG and transformed it into the Turnbull Blue dye; a change in the optical absorption ensued. The fluence values delivered by the source did not provide a linear response, but it was still possible to use TBG as an optical dosimeter. In conclusion, TBG can be applied to detect solar radiation because it is sensitive enough to measure sun exposure values at time intervals of few minutes.

  7. Preparation and fluorescence properties of crystalline gel rare earth phosphates.

    Science.gov (United States)

    Onoda, Hiroaki; Funamoto, Takehiro

    2015-03-01

    An aqueous solution of sodium dihydrogen phosphate was mixed with a aqueous solution of lanthanum nitrate and stirred for 24 h, and the pH was adjusted to 11 using ammonia. The obtained phosphates were analyzed using X-ray diffraction, Fourier transform infrared spectroscopy, thermogravimetry-differential thermal analysis, and scanning electron microscopy. The lanthanum phosphate gel was obtained with a large amount of water. The fluorescence of the gels was investigated by substituting a part of the lanthanum cations with cerium, terbium, and europium cations. UV-vis reflectance and fluorescence spectra of these substituted materials were obtained and analyzed. Rrare-earth phosphate gels with large amounts of water exhibited bluish purple, green, and red fluorescence when cation ratios of La/Ce = 70/30, La/Ce/Tb = 55/30/15, and La/Eu = 95/5 were used, respectively.

  8. Rapid DNA sequencing by horizontal ultrathin gel electrophoresis.

    Science.gov (United States)

    Brumley, R L; Smith, L M

    1991-01-01

    A horizontal polyacrylamide gel electrophoresis apparatus has been developed that decreases the time required to separate the DNA fragments produced in enzymatic sequencing reactions. The configuration of this apparatus and the use of circulating coolant directly under the glass plates result in heat exchange that is approximately nine times more efficient than passive thermal transfer methods commonly used. Bubble-free gels as thin as 25 microns can be routinely cast on this device. The application to these ultrathin gels of electric fields up to 250 volts/cm permits the rapid separation of multiple DNA sequencing reactions in parallel. When used in conjunction with 32P-based autoradiography, the DNA bands appear substantially sharper than those obtained in conventional electrophoresis. This increased sharpness permits shorter autoradiographic exposure times and longer sequence reads. Images PMID:1870968

  9. Neutron Scattering on Impurity Nanoclusters in Gel Samples

    Directory of Open Access Journals (Sweden)

    V. B. Efimov

    2015-01-01

    Full Text Available Results of recent SANS experiments with impurity-helium gel (IHG samples in He-II are presented. We estimate the mean size of the impurity nanoparticles that form the frame of the IHG samples and discuss the possibility to use IHG samples for the production of ultracold neutrons (UCNs in He-II cooled to the temperature of a few mK, as well as the reflection of UCNs at any temperature. Our results indicate that the most promising materials for these purposes might be the heavy water gel samples with the mean sizes of D2O clusters of d~8 nm and the heavy alcohol gel samples with the mean sizes of clusters of d~15 nm.

  10. Chemical Sensors Based on Molecularly Imprinted Sol-Gel Materials

    Directory of Open Access Journals (Sweden)

    Franz L. Dickert

    2010-03-01

    Full Text Available The sol-gel technique is earning the worldwide attention of researchers in the field of material science, due to its versatility in synthesizing inorganic ceramic materials at mild conditions. High purity, homogeneity, controlled porosity, stable temperature and nanoscale structuring are the most remarkable features offered by this method for generating highly sensitive and selective matrices to incorporate analyte molecules. The crafting of sol-gel sensors through molecular imprinting has put great influence on the development of innovative chemical sensors, which can be seen from the growing number of publications in this field. The review provides a brief overview of sol-gel sensor applications, and discusses the contribution of molecular imprinting in exploring the new world of sensors.

  11. Growth of strontium oxalate crystals in agar–agar gel

    Indian Academy of Sciences (India)

    P V Dalal; K B Saraf

    2011-04-01

    Single crystals of strontium oxalate have been grown by using strontium chloride and oxalic acid in agar–agar gel media at ambient temperature. Different methods for growing crystals were adopted. The optimum conditions were employed in each method by varying concentration of gel and reactants, and gel setting time etc. Transparent prismatic bi-pyramidal platy-shaped and spherulite crystals were obtained in various methods. The grown crystals were characterized with the help of FT–IR studies and monoclinic system of crystals were supported with lattice parameters = 9.67628 Å, = 6.7175 Å, = 8.6812 Å, = 113.566°, and = 521.84 Å3 calculated from X-ray diffractogram.

  12. Copper base materials prepared by gel-casting process

    Institute of Scientific and Technical Information of China (English)

    LIU Weihua; JIA Chengchang; SHI Yantao; HAN Yuepeng

    2008-01-01

    Gel-casting process was developed as a new molding process in the field of copper base powder metallurgy to manufacture metal parts with excellent performance and complex shapes.Through changing the parameters of gel-casting process,such as dispersant and solid loading,the corresponding effects on the rheology of Cu slurries,molding and sintering behaviors were studied.The results show that the viscosity of Cu slurries was significantly reduced with an increase in dispersant.The most appropriate solid loading was found to be 61% and the sintering temperature was 910℃ in these experiments.After the optimization of parameters of gel-casting process,copper composite parts with relatively high density and better properties were obtained.

  13. Non-diffusing photochromic gel for optical computed tomography phantoms

    Science.gov (United States)

    Jordan, K.

    2013-06-01

    This study examines photochromic response in radiation sensitive hydrogels. Genipin, crosslinked, gelatin gel can support high resolution images because the chromophores do not diffuse. A low power, 633 nm He-Ne laser was used to write lines into the gels by a photobleaching reaction. Optical cone-beam computed tomography (CBCT) scans mapped the high resolution images in 3D with 0.25 mm voxel resolution. A straight line was written into a deformed gel and then readout in its relaxed, initial shape. The curved, photo-bleached line demonstrated deformable 3D dosimetry is possible with this system to the balloon edge. High resolution, photochromic images provide key information for characterizing optical CT scanners and 3D dosimeters. Many, ionizing radiation, dosimeter materials demonstrate either a photochromic or photothermal response, allowing this approach to be widely used in quantitative 3D scanning.

  14. Graphitic carbon nitride embedded hydrogels for enhanced gel electrophoresis.

    Science.gov (United States)

    Zarei, Mohammad; Ahmadzadeh, Hossein; Goharshadi, Elaheh K; Farzaneh, Ali

    2015-08-05

    Here, we show, for the first time, the use of graphitic carbon nitride (g-C3N4) nanosheets to improve the resolution and efficiency of protein separation in gel electrophoresis. By loading 0.04% (m/v) g-C3N4 nanosheets into the polyacrylamide gel at 25 °C, the thermal conductivity increased approximately 80% which resulted in 20% reduction in Joule heating and overall increase of separation efficiency. Also, polymerization of acrylamide occurred in the absence of tetramethylethylenediamine (TEMED) when the polyacrylamide gel contained g-C3N4 nanosheets. Hence, the g-C3N4 act simultaneously as a polymerization catalyst as well as heat sinks to lower Joule heating effect on band broadening.

  15. Sol-Gel Synthesized Adsorbents for Metal Separation

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    A series of organo-ceramic adsorbents have been synthesized by a sol-gel processing technique for metal ion extraction. These adsorbents generally have significantly high metal uptake capacities, good physical-chemical stabilities, and well-designed pore geometries compared to other pre-existing metalchelating ceramic-based adsorbents. This work describes the synthesis and evaluation of pyrazole and calix[4]arene crown adsorbents for selective separation of platinum, palladium, and gold and cesium ions,respectively, from solutions. These materials exhibit mesoporous properties with high surface areas and pore volumes. The sol-gel synthesis starting with precursor silanes and titania results in gel particles of desired pore characteristics and high capacity and stability. Characterization studies, such as adsorption isotherms, breakthrough curves for fixed bed operation, and material stability, show promising results for applications to metal sepation.

  16. Characterization of aluminum/RP-1 gel propellant properties

    Science.gov (United States)

    Rapp, Douglas C.; Zurawski, Robert L.

    1988-01-01

    Research efforts are being conducted by the NASA Lewis Research Center to formulate and characterize the properties of Al/RP-1 and RP-1 gelled propellants for rocket propulsion systems. Twenty four different compositions of gelled fuels were formualted with 5 and 16 micron, atomized aluminum powder in RP-1. The total solids concentration in the propellant varied from 5 to 60 wt percent. Tests were conducted to evaluate the stability and rheological characteristics of the fuels. Physical separation of the solids occurred in fuels with less than 50 wt percent solids concentration. The rheological characteristics of the Al/RP-1 fuels varied with solids concentration. Both thixotropic and rheopectic gel behavior were observed. The unmetallized RP-1 gels, which were formulated by a different technique than the Al/RP-1 gels, were highly viscoelastic. A history of research efforts which were conducted to formulate and characterize the properties of metallized propellants for various applications is also given.

  17. Densification and crystallization behaviour of colloidal cordierite-type gels

    Directory of Open Access Journals (Sweden)

    LJILJANA KOSTIC-GVOZDENOVIC

    2001-05-01

    Full Text Available Three cordierite-type gels were prepared from an aqueous solution of Mg(NO32, a boehmite sol and silica sols of very small particle sizes. The effect of varying the silica particle size on the crystallization and densification behaviour was studied. Phase development was examined by thermal analysis and X-ray diffraction, while the densification behaviour was characterized by measuring the linear shrinkage of pellets. The activation energy of densification by viscous flow was determined using the Franckel model for non-isothermal conditions and a constant heating rate. The results show that spinel crystallizes from the colloidal gels prior to cristobalite, and their reaction gives a-cordierite, which is specific for three-phase gels. Decreasing the silica particles size lowers the cristobalite crystallization temperature and the a-cordierite formation temperature. The activation energy of densification by viscous flow is lower and the densification more efficient, the smaller the silica particles are.

  18. Behaviour of a solvent trapped in a physical molecular gel

    Science.gov (United States)

    Morfin, I.; Spagnoli, S.; Rambaud, C.; Longeville, S.; Plazanet, M.

    2016-03-01

    Physical gels formed by amphiphilic molecules, namely in this study Methyl-4,6-O-benzylidene-? -D-mannopyranoside, can be form either in polar and protic liquid-like water or in organic apolar solvent such as toluene. The solvent, that influences the supramolecular organization of the gelators, plays an important role in the stability and formation of the gel phase. Gelator-solvent interactions govern not only the assembly but also the solvent diffusion in the material. We present here measurements of neutron scattering (Time of Flight and Neutron Spin Echo) characterizing this microscopic behaviour. In addition, we show that transient grating spectroscopy provides valuable information through the characterization of the longitudinal acoustic wave propagating in the system. Opposite effects on the speed of sound in the gels are observed for the two solvents investigated, being relevant of the interactions between the gelators and the surrounding liquid.

  19. Rheology and Relaxation Timescales of ABA Triblock Polymer Gels

    Science.gov (United States)

    Peters, Andrew; Lodge, Timothy

    When dissolved in a midblock selective solvent, ABA polymers form gels composed of aggregated end block micelles bridged by the midblocks. While much effort has been devoted to the study of the structure of these systems, the dynamics of these systems has received less attention. We examine the underlying mechanism of shear relaxation of ABA triblock polymer gels, especially as a function of chain length, composition, and concentration. Recent work using time-resolved small-angle neutron scattering of polystyrene (PS)-block-poly(ethylene-alt-propylene) (PEP) in squalane has elucidated many aspects of the dynamics of diblock chain exchange. By using rheology to study bulk relaxation phenomena of the triblock equivalent, PS-PEP-PS, we apply the knowledge gained from the chain exchange studies to bridge the gap between the molecular and macroscopic relaxation phenomena in PS-PEP-PS triblock gels.

  20. Surface structure of polymer Gels and emerging functions

    CERN Document Server

    Kobiki, Y

    1999-01-01

    We report the surface structure of polymer gels on a submicrometer scale during the volume phase transition. Sponge-like domains with a mesoscopic scale were directly observed in water by using at atomic force microscope (AFM). The surface structure characterized by the domains is discussed in terms of the root-mean-square roughness and the auto-correlation function, which were calculated from the AFM images. In order to demonstrate the role of surface structure in determining the macroscopic properties of film-like poly (N-isopropylacrylamide: NIPA) gels. It was found that the temperature dependence, as well as the absolute values of the static contact angle, were strongly dependent on the bulk network inhomogeneities. The relation between the mesoscopic structure and the macroscopic properties is qualitatively discussed in terms of not only the changes in the chemical, but also in the physical, surface properties of the NIPA gels in response to a temperature change.