WorldWideScience

Sample records for gelcasting polycrystalline alumina

  1. Gelcasting polycrystalline alumina

    Energy Technology Data Exchange (ETDEWEB)

    Janney, M.A. [Oak Ridge National Lab., TN (United States)

    1997-04-01

    This work is being done as part of a CRADA with Osram-Sylvania, Inc. (OSI) OSI is a major U.S. manufacturer of high-intensity lighting. Among its products is the Lumalux{reg_sign} line of high-pressure sodium vapor arc lamps, which are used for industrial, highway, and street lighting. The key to the performance of these lamps is the polycrystalline alumina (PCA) tube that is used to contain the plasma that is formed in the electric arc. That plasma consists of ionized sodium, mercury, and xenon vapors. The key attributes of the PCA tubes are their transparency (95% total transmittance in the visible region), their refractoriness (inner wall temperature can reach 1400{degrees}C), and their chemical resistance (sodium and mercury vapor are extremely corrosive). The current efficiency of the lamps is very high, on the order of several hundred lumens / watt. (Compare - incandescent lamps -13 lumens/watt fluorescent lamps -30 lumens/watt.) Osram-Sylvania would like to explore using gelcasting to form PCA tubes for Lumalux{reg_sign} lamps, and eventually for metal halide lamps (known as quartz-halogen lamps). Osram-Sylvania, Inc. currently manufactures PCA tubes by isostatic pressing. This process works well for the shapes that they presently use. However, there are several types of tubes that are either difficult or impossible to make by isostatic pressing. It is the desire to make these new shapes and sizes of tubes that has prompted Osram-Sylvania`s interest in gelcasting. The purpose of the CRADA is to determine the feasibility of making PCA items having sufficient optical quality that they are useful in lighting applications using gelcasting.

  2. Gelcasting Polycrystalline Alumina

    Energy Technology Data Exchange (ETDEWEB)

    Janney, M.A.; Zuk, K.J.; Wei, G.C.

    2000-01-01

    OSRAM SYLVANIA INC. is a major U.S. manufacturer of high-intensity lighting. Among its products is the Lumalux TM line of high-pressure sodium vapor arc lamps, which are used for industrial, highway, and street lighting. The key to the performance of these lamps is the polycrystalline alumina (PCA) tube that is used to contain the plasma that is formed in the electric arc. That plasma consists of ionized sodium, mercury, and xenon vapors. The key attributes of the PCA tubes are their transparency ({approximately}97% total transmittance in the visible), their refractoriness (inner wall temperature can reach l2OOC), and their chemical resistance (sodium and mercury vapor are extremely corrosive). The current efficiency of the lamps is very high, up to 100 initial lumens per watt. (Compare incandescent lamps 10-20 lumens per watt, fluorescent lamps 25-90 lumens per watt.)

  3. Produção e caracterização de espumas de alumina pelo processo gelcasting sem controle atmosférico Production and characterization of alumina foams by the gelcasting process without atmospheric contro

    Directory of Open Access Journals (Sweden)

    E. de Sousa

    2009-06-01

    Full Text Available O processo de gelcasting, associado à aeração de suspensões cerâmicas, permite a produção de espumas cerâmicas com uma ampla faixa de porosidade (50-90vol.%. Uma das etapas críticas do processo é o enrijecimento da espuma, o qual se baseia na gelificação por meio da polimerização in situ de monômeros previamente adicionados à suspensão cerâmica. Sabidamente, tal reação é inibida pela presença de oxigênio, o que tornou usual o controle atmosférico durante a produção e gelificação da espuma. Neste trabalho, estudou-se a viabilidade de produzir espumas de alumina pelo processo de gelcasting sem controle atmosférico. Para a produção das espumas, dois diferentes agentes espumantes foram testados. As propriedades físicas e mecânicas das espumas cerâmicas, bem como a microestrutura, foram avaliadas e comparadas com resultados obtidos em condições idênticas, porém com controle atmosférico. Os resultados mostraram que ambos os processos proporcionam características semelhantes e com potencial de aplicação tecnológica.The gelcasting process with the aeration of ceramic suspensions allows the production of ceramic foams with a wide range of porosity (50-90vol.%.. One of the critical steps of the process is the setting of the foam, which is based on a gelling reaction by the in-situ polymerization of monomers previously added in the ceramic suspension. This reaction is inhibited by the presence of oxygen, which requires atmospheric control for the stabilization of the foam. In this work, the feasibility of producing alumina foams by the gelcasting process without atmospheric control was studied. For the foams production, two different foaming agents were tested. The physical and mechanical properties of ceramic foams, as well the microstructure, were evaluated and compared with those produced with the same foaming agents but with atmospheric control. The results obtained using the two procedures were similar and

  4. Compositional effects on the chemorheological properties and forming behavior of aqueous alumina-poly(vinyl alcohol) gelcasting suspensions

    Science.gov (United States)

    Morissette, Sherry L.

    A new gelcasting system based on aqueous, alumina-poly(vinyl alcohol) (PVA) suspensions cross-linked by an organotitanate coupling agent has been developed. Both the chemorheological properties and forming behavior of this system exhibited a strong compositional dependence. A sol- gel phase diagram was established, which yielded the critical titanium concentration [Ti] c required for gelation at a given PVA volume fraction, as well as the minimum PVA volume fraction ( fminPVA = 0.0245) and titanium PVA concentration ([Ti]min = 9.984 x 10--4 g Ti/ml) below which gelation was not observed irrespective of solution composition. The gelation time of suspensions of constant PVA volume fraction ( fsolnPVA ) decreased with increasing cross-linking agent concentration, PVA temperature, and solids volume fraction. The steady-state viscosity and elastic modulus of polymer solutions ( fsolnPVA = 0.05) of varying [Ti] were well described by the PVA percolation model, giving scaling exponents of 0.84 and 1.79, respectively. The steady-state elastic modulus of gel casting suspensions, which provides a measure of their handling strength in the as-gelled state, increased with increasing solids volume fraction. Gelcasting suspensions were used as feedstock for solid free-form fabrication (SFF) of ceramic components. The influence of processing conditions (e.g., tip diameter, mixing rate, table speed, etc.) and suspension rheology on deposition behavior was investigated. Continuous printablity was achieved for tip diameters ranging from dt = 0.254 -- 1.370 mm for all mixing rates (Rmix 5 -- 300 rpm) and suspension compositions (i.e., fAl2O3 = 0.45, φPVA = 0.275, [Ti] 0 -- 6.30 x 10--3 g Ti/ml) probed, where the minimum tip diameter for continuous printing was 0.203 mm. Printed lines were uniform with good edge definition. Line dimensions were independent of mixing rate for the given process conditions. The as-cast alumina volume fraction ( fAl2O3 ) depended on casting conditions and

  5. Dielectric Performance of a High Purity HTCC Alumina at High Temperatures - a Comparison Study with Other Polycrystalline Alumina

    Science.gov (United States)

    Chen, Liangyu

    2014-01-01

    A very high purity (99.99+%) high temperature co-fired ceramic (HTCC) alumina has recently become commercially available. The raw material of this HTCC alumina is very different from conventional HTCC alumina, and more importantly there is no glass additive in this alumina material for co-firing processing. Previously, selected HTCC and LTCC (low temperature co-fired ceramic) alumina materials were evaluated at high temperatures as dielectric and compared to a regularly sintered 96% polycrystalline alumina (96% Al2O3), where 96% alumina was used as the benchmark. A prototype packaging system based on regular 96% alumina with Au thickfilm metallization successfully facilitated long term testing of high temperature silicon carbide (SiC) electronic devices for over 10,000 hours at 500 C. In order to evaluate this new high purity HTCC alumina for possible high temperature packaging applications, the dielectric properties of this HTCC alumina substrate were measured and compared with those of 96% alumina and a previously tested LTCC alumina from room temperature to 550 C at frequencies of 120 Hz, 1 KHz, 10 KHz, 100 KHz, and 1 MHz. A parallel-plate capacitive device with dielectric of the HTCC alumina and precious metal electrodes were used for measurements of the dielectric constant and dielectric loss of the co-fired alumina material in the temperature and frequency ranges. The capacitance and AC parallel conductance of the capacitive device were directly measured by an AC impedance meter, and the dielectric constant and parallel AC conductivity of the dielectric were calculated from the capacitance and conductance measurement results. The temperature and frequency dependent dielectric constant, AC conductivity, and dissipation factor of the HTCC alumina substrate are presented and compared to those of 96% alumina and a selected LTCC alumina. Other technical advantages of this new co-fired material for possible high packaging applications are also discussed.

  6. Dielectric Performance of High Purity HTCC Alumina at High Temperatures - A Comparison Study with Other Polycrystalline Alumina

    Science.gov (United States)

    Chen, Liang-Yu

    2012-01-01

    A very high purity (99.99+) high temperature co-fired ceramic (HTCC) alumina has recently become commercially available. The raw material of this HTCC alumina is very different from conventional HTCC alumina, and more importantly there is no glass additive in this co-fired material. Previously, selected HTCC and LTCC (low temperature co-fired ceramic) alumina materials were evaluated at high temperatures as dielectric and compared to a regularly sintered 96 polycrystalline alumina (96 Al2O3), where 96 alumina was used as the benchmark. A prototype packaging system based on regular 96 alumina with Au thick-film metallization successfully facilitated long term testing of high temperature silicon carbide (SiC) electronic devices for over 10,000 hours at 500C. In order to evaluate this new HTCC alumina for possible high temperature packaging applications, the dielectric properties of this HTCC alumina substrate were measured and compared with those of 96 alumina and a LTCC alumina from room temperature to 550C at frequencies of 120 Hz, 1 KHz, 10 KHz, 100 KHz, and 1 MHz. A parallel-plate capacitive device with dielectric of the HTCC alumina and precious metal electrodes were used for measurements of the dielectric constant and dielectric loss of the co-fired alumina material in the temperature and frequency ranges. The capacitance and AC parallel conductance of the capacitive device were directly measured by an AC impedance meter, and the dielectric constant and parallel AC conductivity of the dielectric were calculated from the capacitance and conductance measurement results. The temperature and frequency dependent dielectric constant, AC conductivity, and dissipation factor of the HTCC alumina substrate are presented and compared to those of 96 alumina. Other technical advantages of this new co-fired material for possible high packaging applications are also discussed.

  7. Positron lifetime study of vacancy-type defects in amorphous and polycrystalline nanometer-sized alumina

    Energy Technology Data Exchange (ETDEWEB)

    Shek, C.H.; Lai, J.K.L. [City Univ. of Hong Kong, Kowloon (Hong Kong). Dept. of Phys. and Mater. Sci.; Gu, T.S.; Lin, G.M. [Department of Physics, Zhongshan University, Guangzhou, 510275 (China)

    1998-04-01

    Amorphous and polycrystalline nanometer-sized alumina were prepared by direct oxidation and hydrolysis, respectively, of pure aluminum. The positron-lifetime parameters and their variations with grain growth during annealing were measured. Three lifetime components were observed in both amorphous Al{sub 2}O{sub 3} and nanocrystalline Al{sub 2}O{sub 3} specimens. The short-lifetime (170{+-}20 ps), intermediate-lifetime (410{+-}20 ps) and long-lifetime components correspond to three different kinds of defects: monovacancy-like free volumes, microvoids, and larger voids. The appearance of lifetimes in the range 1-5 ns indicates the formation of positronium. The influence of thermal annealing from 873 K to 1373 K on positron lifetime parameters was also analyzed. The components with lifetimes {tau}{sub 1}=170 ps and {tau}{sub 2}=410 ps persisted even after the grains had grown to 100 nm in size, while the long-lifetime component declined significantly when grain sizes exceeded 10 nm. The interface characteristics of polycrystalline nano-Al{sub 2}O{sub 3} prepared by the two methods were compared by analyzing the variations of the positron-lifetime parameters with grain growth. (orig.) With 6 figs., 2 tabs., 20 refs.

  8. 凝胶注模固化及真空干燥优化ZTA牙科陶瓷的性能%Optimizing of curing and vacuum drying on dental zirconia-toughened alumina ceramics formed by gel-casting

    Institute of Scientific and Technical Information of China (English)

    杨征宇; 麻健丰; 童亦萍; 金琼; 杜若茜; 王思钱

    2012-01-01

    Objective: To investigate the effects of process parameters in curing polymerization and vacuum drying process of gelcast zirconia-toughened alumina (ZTA) ceramics, and the gel-casting route was optimized for dental all-ceramic restoration applications. Methods: The ZTA composite gel system was prepared by gelcasting. ①Samples were prepared respectively under different polymerizing temperature. Change of relative surface hardness on solidifying course was measured. The strength and shrinkage of ceramic green bodies were tested before and after sintering. ②0n the basis of previous studies, all the samples were dried under different allocation of temperature and vacuum degree. Their relative moisture content at each time point was characterized, and ceramic performance was estimated by means of three-point bending strength, linear shrinkage rate while sintered. Results: ①The temperature area between 40 ℃ to 70 ℃ could improve the gel reaction rate, while ceramic performance degraded at the temperature of 80 ℃ . ②Vacuum with warming environment could shorten gel ceramic drying time vastly,however,unbalanced proportion of temperature and vacuum degree may lead to tremendous damage of ceramics. Conclusion: ZTA gel system requires only 20 min for fully curing reaction at 50~60 ℃. In condition of 70~80 ℃ heating and 0.08~0.09 MPa of vacuum degree, wet ceramic matrix were completely dried within 2.5 h. Furthermore, the specimen showed a unbroken surface, with little defect and deformation in structure. This technological process has the promising for dental all-ceramic applications and may merit further research.%目的:研究影响氧化锆增韧氧化铝(ZTA)牙科陶瓷性能的凝胶注模成型固化反应过程和真空干燥条件,探索优化可应用于全瓷牙冠制备的工艺.方法:采用凝胶注模成型制备ZTA:①在不同固化温度下分别制备样品,检测各组试样在固化过程中表面相对硬度变化;烧结各组试

  9. Segregation of anion (Cl−) impurities at transparent polycrystalline α-alumina interfaces

    OpenAIRE

    Tewari, Abhishek; Nabiei, Farhang; Cantoni, Marco; Bowen, Paul; Hébert, Cécile

    2014-01-01

    Small amounts of anion impurities (e.g. Cl), which are incorporated during the synthesis of ceramic powders, can affect the properties and microstructure of the final sintered ceramic. The effect of anion impurities is a little studied and poorly understood phenomenon. In this work a combination of STEM-EDX analysis and atomistic modeling approach was used to understand the segregation of Cl in transparent alumina ceramics. A high resolution analytical electron microscopy study showed the pre...

  10. In-situ real time monitoring of the polymerization in gel-cast ceramic processes

    Energy Technology Data Exchange (ETDEWEB)

    Ahuja, S.; Dieckman, S.L.; Bostrom, G.A.; Waterfield, L.G.; Raptis, A.C. [Argonne National Lab., IL (United States); Omatete, O.O. [Oak Ridge National Lab., TN (United States)

    1996-08-01

    Gelcasting requires making a mixture of a slurry of ceramic powder in a solution of organic monomers and casting it in a mold. Gelcasting is different from injection molding in that it separates mold filling from setting during conversion of the ceramic slurry to a formed green part. In this work, NMR spectroscopy and imaging were used for in-situ monitoring of the gelation process and gelcasting of alumina. {sup 1}H NMR spectra and images are obtained during polymerization of a mixture of soluble reactive acrylamide monomers. Polymerization was initiated by adding an initiator and an accelerator to form long- chain, crosslinked polymers. Multidimensional NMR imaging was used for in-situ monitoring of the process and for verification of homogeneous polymerization. Comparison of the modeled intensities with acquired images shows a direction extraction of T{sub 1} data from the images.

  11. Magnetic Resonance Imaging of Gel-cast Ceramic Composites

    Science.gov (United States)

    Dieckman, S. L.; Balss, K. M.; Waterfield, L. G.; Jendrzejczyk, J. A.; Raptis, A. C.

    1997-01-16

    Magnetic resonance imaging (MRI) techniques are being employed to aid in the development of advanced near-net-shape gel-cast ceramic composites. MRI is a unique nondestructive evaluation tool that provides information on both the chemical and physical properties of materials. In this effort, MRI imaging was performed to monitor the drying of porous green-state alumina - methacrylamide-N.N`-methylene bisacrylamide (MAM-MBAM) polymerized composite specimens. Studies were performed on several specimens as a function of humidity and time. The mass and shrinkage of the specimens were also monitored and correlated with the water content.

  12. Preparing UO2 kernels by gelcasting

    Institute of Scientific and Technical Information of China (English)

    GUO Wenli; LIANG Tongxiang; ZHAO Xingyu; HAO Shaochang; LI Chengliang

    2009-01-01

    A process named gel-casting has been developed for the production of dense UO2 kernels for the high-ten-temperature gas-cooled reactor. Compared with the sol-gel process, the green microspheres can be got by dispersing the U3O8 slurry in gelcasting process, which means that gelcasting is a more facilitative process with less waste in fabricating UO2 kernels. The heat treatment.

  13. Oxygen grain-boundary transport in polycrystalline alumina using wedge-geometry bilayer samples: Effect of Y-doping

    Energy Technology Data Exchange (ETDEWEB)

    Cheng, H. [Department of Chemical Engineering, Lehigh University, Bethlehem, PA 18015 (United States)] [Center for Advanced Materials and Nanotechnology, Lehigh University, Bethlehem, PA 18015 (United States); Caram, H.S.; Schiesser, W.E. [Department of Chemical Engineering, Lehigh University, Bethlehem, PA 18015 (United States); Rickman, J.M.; Chan, H.M. [Department of Materials Science and Engineering, Lehigh University, Bethlehem, PA 18015 (United States)] [Center for Advanced Materials and Nanotechnology, Lehigh University, Bethlehem, PA 18015 (United States); Harmer, M.P., E-mail: mph2@lehigh.edu [Department of Materials Science and Engineering, Lehigh University, Bethlehem, PA 18015 (United States)] [Center for Advanced Materials and Nanotechnology, Lehigh University, Bethlehem, PA 18015 (United States)

    2010-04-15

    Novel wedge-geometry, dual-layer alumina samples, both undoped and 500 ppm Y{sup 3+}-doped, were studied in the temperature regime 1250-1400 deg. C to determine the effect of Y{sup 3+} on oxygen grain-boundary transport in alumina. The samples consisted of a wedge-shaped, single-phase alumina top layer, diffusion bonded to an alumina/Ni substrate containing a fine, uniform dispersion of Ni marker particles (0.5 vol.%). The extent of the alumina spinel oxidation layer was measured as a function of the wedge thickness for a series of heat-treatment conditions. Models of the transport behavior were used to derive values for the rate constants (k) in both the alumina top layer and the alumina/Ni substrate. It was found that the presence of yttrium slows oxygen grain-boundary diffusion in alumina by a factor of {approx}5 (at 1300 deg. C), and increases the corresponding activation enthalpy for oxidation from 407 {+-} 20 to 486 {+-} 34 kJ mol{sup -1}. Microstructural observations suggested that yttrium also slows Ni outward diffusion. A comparison of the different k values revealed that, at 1300 deg. C, the presence of Ni alone enhances transport by a factor of {approx}2 relative to undoped alumina.

  14. FABRICATION OF POROUS ALUMINA CERAMICS WITH CORN STARCH IN AN EASY AND LOW-COST WAY

    OpenAIRE

    2015-01-01

    Porous alumina ceramics with different porosity were fabricated by combining the starch consolidation process with the gel-casting process using corn starch as a pore-forming agent and a binder. The bulk density, porosity, and microstructure of the obtained alumina ceramics were studied. It was found that the total porosity range of sintered samples with contents varying from 0 to 50 vol. % is 14.8 - 55.3 % and the total porosity increased with the increase of starch content. Moreove...

  15. Shape forming of ceramics via gelcasting of aqueous particulate slurries

    Indian Academy of Sciences (India)

    S Dhara; R K Kamboj; M Pradhan; P Bhargava

    2002-11-01

    Gelcasting is a promising technique for shape forming of bulk dense or porous ceramic, metal structures. The process offers a number of advantages over processes such as slip casting, injection molding in forming complex ceramic shapes. It is shown here that the optimization of slurry rheology, choice of mold material, mold design and the drying conditions have a significant role in the overall success of the process. In this process, components of simple or complex shapes can be produced to near net shape by direct casting. If required complex shapes can also be produced by machining the green gelcast bodies. The process of gelcasting also has a lot of potential in forming highly porous ceramic shapes.

  16. Copper base materials prepared by gel-casting process

    Institute of Scientific and Technical Information of China (English)

    LIU Weihua; JIA Chengchang; SHI Yantao; HAN Yuepeng

    2008-01-01

    Gel-casting process was developed as a new molding process in the field of copper base powder metallurgy to manufacture metal parts with excellent performance and complex shapes.Through changing the parameters of gel-casting process,such as dispersant and solid loading,the corresponding effects on the rheology of Cu slurries,molding and sintering behaviors were studied.The results show that the viscosity of Cu slurries was significantly reduced with an increase in dispersant.The most appropriate solid loading was found to be 61% and the sintering temperature was 910℃ in these experiments.After the optimization of parameters of gel-casting process,copper composite parts with relatively high density and better properties were obtained.

  17. Porosity and mechanical properties of porous titanium fabricated by gelcasting

    Institute of Scientific and Technical Information of China (English)

    LI Yan; GUO Zhimeng; HAO Junjie; REN Shubin

    2008-01-01

    Porous Ti compacts with large size and complex shape for biomedical applications were fabricated in the porosity range from 40.5% to 53.8% by controlling gelcasting parameters and sintering conditions. The experimental results show that the total porosity and open porosity of porous titanium compacts gelcast from the Ti slurry with 34 vol.% solid loading and sintered at 1100℃ for 1.5h are 46.5% and 40.7%, respectively, and the mechanical properties are as follows: compressive strength 158.6MPa and Young's modulus 8.5GPa, which are similar to those of human cortical bone and appropriate for implanting purpose.

  18. Photoluminescence, FTIR and X-ray diffraction studies on undoped and Al-doped ZnO thin films grown on polycrystalline {alpha}-alumina substrates by ultrasonic spray pyrolysis

    Energy Technology Data Exchange (ETDEWEB)

    Djelloul, A., E-mail: djelloulabdelkader@yahoo.f [LASPI2A Laboratoire des Structures, Proprietes et Interactions Inter Atomiques, Centre Universitaire Khenchela (Algeria); Aida, M-S. [Laboratoire des Couches minces et Interface, Universite de Constantine (Algeria); Bougdira, J. [Institut Jean Lamour, UMR 7198 CNRS, Nancy Universite, UPV-Metz, Faculte des Sciences et Techniques, B.P. 239, Bd des Aiguillettes, 54506 Vandoeuvre-les-Nancy (France)

    2010-11-15

    Undoped and aluminum-doped zinc oxide (ZnO) thin films have been grown on polycrystalline {alpha}-alumina substrates by ultrasonic spray pyrolysis (USP) technique using zinc acetate dihydrate and aluminum chloride hexahydrate (Al source) dissolved in methanol, ethanol and deionized water. A number of techniques, including X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, and photoluminescence (PL) were used to characterize the obtained ZnO thin films. It was seen that the orientation changed with increase in substrate temperature. During the ZnO deposition Zn source reacted with polycrystalline {alpha}-Al{sub 2}O{sub 3} substrate to form an intermediate ZnAl{sub 2}O{sub 4} spinel layer. It has been interestingly found that the intensity of green emission at 2.48 eV remarkably increased when the obtained ZnO:Al films were deposited at 380 {sup o}C. The FTIR absorbance intensity of spectroscopic band at 447{+-}6 cm{sup -1} is very sensitive to oxygen sublattice disorder resulting from non-stoichiometry, which is consistent with the result of PL characterization.

  19. Charge transport in polycrystalline alumina materials: application to the optimization of dielectric breakdown strength; Transport de charges dans les alumines polycristallines: application a l'optimisation de la rigidite dielectrique

    Energy Technology Data Exchange (ETDEWEB)

    Touzin, M.

    2005-12-15

    Dielectric breakdown constitutes an important limitation in the use of insulating materials under high-tension since it leads to the local fusion and the sublimation of material. The microstructure (average grain size, intergranular phase) has a great influence on the ability of material to resist this catastrophic phenomenon. Indeed, the interfaces between the various phases constitute potential sites of trapping for the charges. The optimization of the dielectric breakdown strength of a polycrystalline alumina sintered with a liquid phase passes necessarily through the control of the microstructural parameters. Thus, it is shown that by controlling the conditions of the process (rate of sintering aids, powder grain size and thermal cycle), it is possible to control the density (by the average grain size) but also the nature (by the crystallization or not of anorthite) of the grain boundaries. The study of the influence of these two parameters as well temperature on the properties of charge transport and storage was carried out by methods ICM and SEMME. The results, interpreted in light of the numerical simulation of the charge transport in bulk alumina sample during electron beam irradiation, allowed to highlight behaviors, and the corresponding microstructures, favourable to the dielectric breakdown resistance according to the considered temperature. Thus, at room temperature a high density of interfaces (low grain size and crystallized intergranular phase) makes it possible material to durably trap a great amount of charges, which leads to a high dielectric strength. On the other hand, at higher temperature, the presence of shallow traps (vitreous intergranular phase) supports the charge diffusion and makes it possible to delay breakdown. (author)

  20. Preparation and properties of biomedical porous titanium alloys by gelcasting.

    Science.gov (United States)

    Yang, Donghua; Shao, Huiping; Guo, Zhimeng; Lin, Tao; Fan, Lianpeng

    2011-08-01

    Porous titanium alloys have been prepared by gelcasting in this study. The elastic solid green body was first polymerized and then vacuum sintered to porous titanium alloys with low contamination by controlling sintering conditions. The microstructure and the total porosity of the vacuum sintered porous Ti-Co and Ti-Mo alloys were analyzed by using scanning electron microscopy and x-ray diffraction. Moreover, compression and bending tests were conducted to investigate their mechanical properties. The results show that open and closed three-dimensional pore morphologies and total porosity ranging from 38.34% to 58.32% can be achieved. In contrast to porous Ti by gelcasting, the compression and bending strengths of porous titanium alloys were significantly increased by adding Mo and Co with Young's modulus ranging between 7-25 GPa, which is close to that of human cortical bone, therefore being suited for potential application in load-bearing implants.

  1. Rapid Prototyping Bipolar Plate of PEMFC by Gelcasting

    Institute of Scientific and Technical Information of China (English)

    LUO Bing; CHEN Shang-wei; HUANG Ming-yu; WANG Lian-jun

    2006-01-01

    Bipolar plate is one key component of proton exchange membrane fuel cell (PEMFC). According to this paper, mesocarbon microbeads were used as raw materials for forming the green bodies of bipolar plates with complex flow channels by gelcasting technique. Then, the final bipolar plates would be gained after the green parts were died, burned out and sintered. Meanwhile, its properties are researched and evaluated by the test of flexible strength and electric resistivity. The resultant flexural strength of sintered sample is 67 Mpa and the electric resistivity is 52 μΩ·m.

  2. GEL CASTING OF ALUMINA CERAMICS USING AN EGG WHITE PROTEIN BINDER SYSTEM

    Directory of Open Access Journals (Sweden)

    XING HE

    2011-02-01

    Full Text Available Egg white protein (EW is a food ingredient commonly used for its gelling properties and has been applied in ceramic fabrication. In this work, EW was used as an environmentally-friendly binder for gelcasting alumina ceramics at elevated temperature (80°C. The gelling behavior was compared with the ambient temperature drying-induced gelation processing. The processing conditions and mechanical properties of the ceramics processed from two different processing variants were compared. The results indicate that the ceramics from heat-induced gelation showed improved mechanical properties and more uniform microstructure after sintering in comparison to the drying-induced ones. Dense and complex-shaped ceramic parts via computer numerical controlled (CNC green machining have been produced from the EW gelcast ceramics.

  3. Manufacture of Fine-Pored Ceramics by the Gelcasting Method

    Directory of Open Access Journals (Sweden)

    Bronisław Psiuk

    2017-01-01

    Full Text Available The fine-pored materials represent a wide range of applications and searches are being continued to develop methods of their manufacturing. In the article, based on measurements on fine-grained powders of Al2O3, TiO2, and SiO2, it has been demonstrated that gelcasting can be relatively simple method of obtaining of nanoporous materials with high values of both specific surface area and open porosity. The powders were dispersed in silica sol, and the gelling initiator was NH4Cl. The usefulness of experiment design theory for developing of fine-pored materials with high porosity and specific surface area was also shown.

  4. Polycrystalline strengthening

    DEFF Research Database (Denmark)

    Hansen, Niels

    1985-01-01

    . The strength-grain size relationships can be described in a number of empirical equations relating the yield stress and the flow stress in tension to various structural parameters. A number of such equations are reviewed and their predictive capability is discussed. Structural information of importance...... found, and this structural information is correlated with a number of strength structural equations. Finally, the flow stress of fcc and bcc polycrystalline specimens is related to the occurrence of microstructures formed by macroscopic and microscopic strain accommodation processes during plastic...... for the understanding of polycrystalline strengthening is obtained mainly from surface relief patterns and from bulk structures observed by transmission electron microscopy of thin foils. The results obtained by these methods are discussed and correlations are proposed. A number of features characterizing the deformed...

  5. Preparation and Properties of Sialon-SiC Suspension for Gelcasting

    Institute of Scientific and Technical Information of China (English)

    YU Tianlai; YANG Zhengfang; HUO Weirong

    2005-01-01

    The raw materials of Al, Si, SiO2, and SiC were used to prepare Sialon-SiC suspension for gelcasting by adjusting the pH value and content of SiC particle and controlling the milling time. The result shows that the stable suspension for gelcasting could be got by adding 40wt% SiC particle at pH= 8. Al would easily hydrolyze to deteriorate the suspension when the milling time was too long, so the optimum milling time should be and the solid loading was 54vol%.

  6. Highly refractory heat-insulating articles based on polycrystalline oxide fibers (review)

    Energy Technology Data Exchange (ETDEWEB)

    Dergaputskaya, L.A.; Degtyareva, E.V.; Dubinko, O.A.; Kalinovskaya, I.N.; Serova, L.V.

    1986-05-01

    The authors discuss the production of polycrystalline fibers from highly refractory oxides, mainly alumina and zirconium dioxide which are the most readily available and the cheapest materials, but highly refractory fibers may be obtained also from other oxides. The fibers are obtained in the monoand polycrystalline forms and the preparation methods for polycrystalline highly refractory fibers are described in some detail. The properties for the main types are given. An addition of small amounts of alumina, polycrystalline fibers to mullite-siliceous glass fiber has a significant influence on the reduction in the shrinkage.

  7. Efeito da técnica de aeração sobre a macroestrutura e a permeabilidade de espumas cerâmicas produzidas via "gelcasting" Effect of aeration technique on the macrostructure and permeability of gelcast ceramic foams

    Directory of Open Access Journals (Sweden)

    F. S. Ortega

    2002-06-01

    Full Text Available A produção de espumas cerâmicas através da aeração de suspensões associada ao processo "gelcasting" pode proporcionar cerâmicas porosas celulares com excelentes propriedades mecânicas, em uma ampla faixa de densidades. Entretanto, o uso deste material em aplicações específicas, como filtragem, isolamento térmico e suporte para catálise, requer adequações macroestruturais que favoreçam as propriedades desejadas, tais como permeabilidade, condutividade térmica e área superficial. Tais propriedades decorrem de características como densidade, distribuição de tamanho de célula e conectividade entre células vizinhas, as quais são definidas durante a produção da espuma. Neste trabalho estudou-se a influência do processo de aeração sobre a macroestrutura da espuma cerâmica. Foram utilizados dois tipos de aerador, sendo um do tipo planetário e outro constituído de um borbulhador acoplado a um agitador mecânico. Suspensões de alumina contendo diferentes concentrações de agente espumante foram submetidas a ciclos de agitação nos dois tipos de aerador. Após a gelificação, os corpos obtidos foram sinterizados e avaliados quanto à permeabilidade ao ar e quanto à distribuição de tamanho de célula utilizando as técnicas de análise de imagem e de porosimetria de mercúrio. Os resultados mostram que o processo de aeração pode influenciar sensivelmente a densidade e o tamanho médio dos poros, com efeitos significativos sobre a permeabilidade do material. Verificou-se ainda que a caracterização da distribuição de tamanho de poro por porosimetria de mercúrio e por microscopia ótica leva a diferentes resultados, mas que ambas as técnicas podem ser úteis, dependendo do objetivo com que são usadas.The production of porous ceramics through the aeration of suspensions associated with the gelcasting process provides cellular porous ceramics with excellent properties and a wide range of densities. Nonetheless

  8. Loss tangent measurements on unirradiated alumina

    Energy Technology Data Exchange (ETDEWEB)

    Zinkle, S.J.; Goulding, R.H. [Oak Ridge National Lab., TN (United States)

    1996-04-01

    Unirradiated room temperature loss tangent for sapphire and several commercial grades of polycrystalline alumina are complied for frequencies between 10{sup 5} and 4x10{sup 11} Hz. Sapphire exhibits significantly lower values for the loss tangent at frequencies up to 10{sup 11} Hz. The loss tangents of 3 different grades of Wesgo alumina (AL300, AL995, AL998) and 2 different grades of Coors alumina (AD94, AD995) have typical values near {approx}10{sup -4} at a frequency of 10{sup 8} Hz. On the other hand, the loss tangent of Vitox alumina exhibits a large loss peak tan d{approx} 5x10{sup -3} at this frequency.

  9. Microstructurally tailored ceramics for advanced energy applications by thermoreversible gelcasting

    Science.gov (United States)

    Shanti, Noah Omar

    Thermoreversible gelcasting (TRG) is an advantageous technique for rapidly producing bulk, net-shape ceramics and laminates. In this method, ceramic powder is suspended in warm acrylate triblock copolymer/alcohol solutions that reversibly gel upon cooling by the formation of endblock aggregates, to produce slurries which are cast into molds. Gel properties can be tailored by controlling the endblock and midblock lengths of the copolymer network-former and selecting an appropriate alcohol solvent. This research focuses on expanding and improving TRG techniques, focusing specifically on advanced energy applications including the solid oxide fuel cell (SOFC). Rapid drying of filled gels can lead to warping and cracking caused by high differential capillary stresses. A new drying technique using concentrated, alcohol-based solutions as liquid desiccants (LDs) to greatly reduce warping is introduced. The optimal LD is a poly(tert-butyl acrylate)/isopropyl alcohol solution with 5 mol% tert-butyl acrylate units. Alcohol emissions during drying are completely eliminated by combining initial drying in an LD with final stage drying in a vacuum oven having an in-line solvent trap. Porous ceramics are important structures for many applications, including SOFCs. Pore network geometries are tailored by the addition of fugitive fillers to TRG slurries. Uniform spherical, bimodal spherical and uniform fibrous fillers are used. Three-dimensional pore structures are visualized by X-ray computed tomography, allowing for direct measurements of physical parameters such as concentration and morphology as well as transport properties such as tortuosity. Tortuosity values as low as 1.52 are achieved when 60 vol% of solids are uniform spherical filler. Functionally graded laminates with layers ranging from 10 mum to > 1 mm thick are produced with a new technique that combines TRG with tape casting. Gels used for bulk casting are not suitable for use with tape casting, and appropriate base

  10. Dynamical Mechanical Properties for AD90 Alumina

    Institute of Scientific and Technical Information of China (English)

    REN Hui-lan; NING Jian-guo; LI Ping

    2007-01-01

    The dynamic response of polycrystalline alumina was investigated in the pressure range of 0 -13 GPa by planar impact experiments.Velocity interferometer system for any reflector(VISAR) was used to obtain free surface velocity profile and determine the Hugoniot elastic limit,and manganin gauges were employed to obtain the stress-time histories and determine Hugoniot curve.Both the free surface particle velocity profiles and Hugoniot curves indicate the dispersion of the "plastic" wave for alumina.With the measured stress histories,the complete histories of strain,particle velocity,specific volume and specific internal energy are gained by using path line principle of Lagrange analysis.The dynamic mechanical behaviors for alumina under impact loading are analyzed,such as nonlinear characteristic,strain rate dependence,dispersion and declination of shock wave in the material.

  11. CRADA final report for CRADA number C/Y-1203-0211, gelcasting of soft ferrite parts

    Energy Technology Data Exchange (ETDEWEB)

    Omatete, O.O. [Oak Ridge National Lab., TN (United States); Van Dillen, G.L., Jr. [Ceramic Magnetics, Inc., Fairfield, NJ (United States)

    1996-03-01

    Soft ferrite parts utilized in areas such as high-energy physics have been successfully gelcast from powders supplied by the industrial partner. To achieve this, several modifications were necessary. First, the as-received ferrite powder was heated to 300, 500 or 800{degrees}C. X-ray analysis showed no changes in the crystal structure of the heat-treated powder even at 800{degrees}C, and particle size distribution and surface area analyses indicated that powders heat treated at 300 and 500{degrees} had mean size and surface area similar to those of the as-received powder. Second, to prevent the parts from shattering during the combined binder burn-off and sintering cycle, the solids loading of the gelcasting slurry was adjusted from 42 vol % to at least 50 vol % and the sintering schedule was modified slightly. These modifications resulted in the production of fired gelcast soft ferrite parts (50 mm {times} 13 mm pucks, {approximately} 125 mm OD {times} 100 mm ID {times} 25 mm rings) which sintered to {approximately}98% of the theoretical density. The partner was satisfied with the parts it received and has discussed pursuing follow-up activities in order to gelcast more complex shapes and large toroids.

  12. Electromotive force measurements on cells involving beta-alumina solid electrolyte

    Science.gov (United States)

    Choudhury, N. S.

    1973-01-01

    Open-circuit emf measurements have been made to demonstrate that a two-phase, polycrystalline mixture of beta-alumina and alpha-alumina could be used as a solid electrolyte in galvanic cells with reversible electrodes fixing oxygen or aluminum chemical potentials. These measurements indicate that such a two-phase solid electrolyte may be used to monitor oxygen chemical potentials as low as that corresponding to Al and Al2O3 coexistence (potentials of about 10 to the minus 47th power atm at 1000 K). The activity of Na2O in beta-alumina in coexistence with alpha-alumina was also determined by emf measurements.

  13. Suspension Rheology, Porosity and Mechanical Strength of Porous Hydroxyapatite Obtained by Gel-casting and Infiltration

    Science.gov (United States)

    González Ocampo, Jazmín; Escobar Jaramillo, Mateo; Escobar Sierra, Diana; Ossa Orozco, Claudia

    2016-02-01

    The gel-casting technique (GC) and infiltration of polymer foam combined with gel-casting (IG) were used to produce hydroxyapatite porous bodies. Due to the fact that the process begins with the preparation of the suspensions, it is necessary to know the rheological properties of the ceramic slurry. This is a critical factor needed to optimize the mechanical strength of the porous body obtained. Therefore, the rheological behavior of various HA slurries was assessed. 40 and 50% solids and three different monomers were evaluated. Subsequently, the compressive strength and porosity of the porous bodies obtained were evaluated. The results revealed that the chemical composition of each monomer can affect the dispersion and rheological properties of the suspension, which directly affects the mechanical properties of the porous bodies. The porous bodies obtained by the GC technique showed strengths higher than those obtained by IG compression. The control executed over the rheology of the suspension was more effective in bodies produced by GC, because IG pyrolysis of polyurethane foam also influenced the mechanical properties of the final product.

  14. Influência do tempo de indução nas propriedades de hidroxiapatita porosa obtida por gelcasting de espumas Influence of the induction time on the properties of porous hydroxyapatite obtained by gelcasting foams

    OpenAIRE

    2007-01-01

    Hidroxiapatita é uma cerâmica bioativa que permite o crescimento de tecido ósseo e revascularização da área implantada pela formação de ligação com a fase mineral dos ossos. Este estudo teve como objetivo a obtenção de blocos porosos de hidroxiapatita através do método gelcasting de espuma, sem a utilização de atmosfera controlada para a realização das polimerizações. O processo gelcasting de espumas consiste na incorporação de uma fase gasosa dispersa dentro de uma suspensão cerâmica contend...

  15. Preparation and Properties of Macroporous Silicon Nitride Ceramics by Gelcasting and Carbonthermal Reaction

    Institute of Scientific and Technical Information of China (English)

    Wen ZHANG; Hongjie WANG; Zhihao JIN

    2005-01-01

    Macroporous silicon nitride (Si3N4) ceramics with high strength, uniform structure and relatively high porosity were obtained by gelcasting and carbonthermal reaction in a two-step sintering technique. Microstructure and composition were investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction(XRD). Open porosity, pore size distribution and basic mechanical performance were measured by Archimedes method,mercury intrusion porosimetry and three-point bending methods, respectively. SEM and TEM results revealed that pores were formed by elongated β-Si3N4. SADP measurement proved the formation of SiC particles. The SiC granules were beneficial for the formation of high ratio elongated β-Si3N4, and at proper amount, they also acted as reinforcement phase. Thermodynamic analysis indicated that the mechanisms of the reactions were mainly associated with liquid-solid reaction and gas-liquid reaction.

  16. PROPERTIES OF HIGHLY POROUS CORDIERITE CERAMIC OBTAINED BY DIRECT FOAMING AND GELCASTING METHOD

    Directory of Open Access Journals (Sweden)

    Ye Li

    2016-05-01

    Full Text Available The highly porous cordierite ceramics were fabricated combining the merits of direct foaming and gelcasting method. The content of gum arabic had a great influence on the foaming capacity and the stability of the wet slurry foam. And the foaming capacity mainly affected the porosity while the stability mainly affected the pore size. The highest porosity of 90% was obtained at 0.4 wt.% gum arabic content and the smallest pore size and the most homogeneous pore distribution were arrived at 1.2 wt.% gum arabic content. As the sintering temperature increased, the porosity and pore size decreased but the uniformity of the pore distribution increased. Moreover, the thermal conductivity was mainly affected not only by the porosity, but also by the sintering degree of the cordierite substrate.

  17. Gel-cast glass-ceramic tissue scaffolds of controlled architecture produced via stereolithography of moulds.

    Science.gov (United States)

    Chopra, K; Mummery, P M; Derby, B; Gough, J E

    2012-12-01

    Two glass-ceramic scaffolds with a simple cubic structure of 500 µm square ligaments and square channels of width 400 or 600 µm have been fabricated by gel-casting into moulds produced by stereolithography, followed by mould removal, polymer burnout and sintering. The scaffolds have crushing strengths of 41 ± 14 and 17 ± 5 Mpa, respectively. Using a method of assembling discrete slices of scaffold, we are able to study cell behaviour within a scaffold by disassembly. Both scaffold structures were seeded with primary human osteoblasts and these penetrate, adhere, spread and proliferate on the scaffold structure. The larger channel diameter scaffold shows a greater cell population (despite its smaller surface area) and more pronounced production of ECM components (collagen and mineralization) with increased time in culture. Studies of sectioned scaffolds show that cell density and ECM production decrease with depth and that the difference between the two scaffold architectures is maintained.

  18. Porous Alumina Films with Width-Controllable Alumina Stripes

    Directory of Open Access Journals (Sweden)

    Huang Shi-Ming

    2010-01-01

    Full Text Available Abstract Porous alumina films had been fabricated by anodizing from aluminum films after an electropolishing procedure. Alumina stripes without pores can be distinguished on the surface of the porous alumina films. The width of the alumina stripes increases proportionally with the anodizing voltage. And the pores tend to be initiated close to the alumina stripes. These phenomena can be ascribed to the electric field distribution in the alumina barrier layer caused by the geometric structure of the aluminum surface.

  19. Porous Alumina Films with Width-Controllable Alumina Stripes.

    Science.gov (United States)

    Huang, Kai; Huang, Shi-Ming; Pu, Lin; Shi, Yi; Wu, Zhi-Ming; Ji, Li; Kang, Jun-Yong

    2010-08-21

    Porous alumina films had been fabricated by anodizing from aluminum films after an electropolishing procedure. Alumina stripes without pores can be distinguished on the surface of the porous alumina films. The width of the alumina stripes increases proportionally with the anodizing voltage. And the pores tend to be initiated close to the alumina stripes. These phenomena can be ascribed to the electric field distribution in the alumina barrier layer caused by the geometric structure of the aluminum surface.

  20. RESEARCH PROGRESS IN GELCASTING PROCESS%注凝成型工艺的研究进展

    Institute of Scientific and Technical Information of China (English)

    刘昊; 沈春英; 丘泰

    2011-01-01

    介绍了陶瓷的注凝成型工艺原理、工艺流程、浆料分散机理、凝胶固化过程和素坯干燥理论,分析了pH值、分散剂、固相含量及粉体特性对注凝成型浆料流变性能的影响,指出了陶瓷注凝成型工艺的发展趋势及存在的问题.%The principle of gel-casting process, the dispersion mechanism of slurry ,the process of gel solidify and the drying theory of green body are introduced. The influences of pH value, dispersant, solid loading, powder characteristic on the theological behavior of suspensoid are analyzed. The problems and development in gel-casting of ceramic is forcasted.

  1. Aplicação de espumas cerâmicas produzidas via "gelcasting" em biorreator para tratamento anaeróbio de águas residuárias Use of ceramic foams produced via gelcasting in bioreactor for anaerobic treatment of wastewater

    Directory of Open Access Journals (Sweden)

    F. S. Ortega

    2001-12-01

    Full Text Available O desenvolvimento da biotecnologia anaeróbia de tratamento de águas residuárias, resultou em novas configurações de biorreatores, nas quais uma importante característica é a existência de condições favoráveis à imobilização de biomassa ativa responsável pela degradação biológica de resíduos poluentes. Características como a resistência à degradação biológica e boa resistência mecânica associadas a uma estrutura celular fazem das espumas cerâmicas excelentes candidatas à fabricação de suportes para imobilização da biomassa. Neste trabalho, utilizou-se o processo "gelcasting" associado à aeração de uma suspensão para produzir suportes de espuma cerâmica. Foram utilizadas alumina e caulinita, materiais estes em que predominam cargas superficiais positiva e negativa, respectivamente, na faixa de pH 7, em que operam os reatores. Após a queima, as espumas foram caracterizadas quanto à densidade aparente e à permeabilidade, e em seguida submetidas a um ciclo de 35 dias em reator diferencial alimentado com esgoto sanitário sintético. Materiais como argila expandida e borracha de etileno-propileno (EPR foram submetidos a ciclo similar e comparados aos materiais cerâmicos. Os resultados permitem avaliar as vantagens e desvantagens das espumas cerâmicas como suporte para a imobilização de microorganismos frente a outros materiais.The development of anaerobic biotechnology for treatment of wastewater has led to new configurations of bioreactors, which have as an important feature the establishment of favorable conditions for the fixation of biomass that will degrade organic material present in wastewaters. Characteristics such as high resistance to biological degradation and high mechanical strength, coupled to cellular structure make ceramic foams an excellent option for the production of supports for biomass immobilization. In this work, the gelcasting process in association with the aeration of a ceramic

  2. Propriedades mecânicas de espumas cerâmicas produzidas via "gelcasting" Mechanical properties of ceramic foams produced by gelcasting

    Directory of Open Access Journals (Sweden)

    F. S. Ortega

    2003-03-01

    Full Text Available Cerâmicas porosas são materiais de grande interesse tecnológico, devido à associação de propriedades únicas como alta refratariedade e inércia química com alta permeabilidade, alta área superficial e baixa condutividade térmica. No entanto, o aumento da porosidade resulta, invariavelmente, na deterioração das propriedades mecânicas. Este trabalho faz uma investigação sobre as propriedades mecânicas de espumas cerâmicas obtidas pela aeração de suspensões associada à polimerização "in situ" de monômeros orgânicos previamente adicionados (processo gelcasting. A macroestrutura resultante deste processo é constituída por poros que tendem a uma geometria esférica, a qual minimiza a concentração de tensões mecânicas. Além disso, as paredes dos poros podem ser completamente densificadas, proporcionando uma microestrutura homogênea. A resistência mecânica de espumas cerâmicas com várias densidades foi avaliada por flexão em quatro pontos e por compressão. Os resultados mecânicos foram analisados através da estatística de Weilbull. O módulo elástico das amostras foi caracterizado pelo método de ressonância mecânica de barras. Os resultados obtidos possibilitam uma melhor compreensão dos fatores que determinam as propriedades mecânicas desta nova classe de material, fornecendo subsídios para futuros desenvolvimentos.Porous ceramics have great technological importance, since they combine ceramics unique properties, such as refractoriness and chemical resistance, with high surface area, high permeability and low thermal conductivity. Nevertheless, increasing porosity generally deteriorates the mechanical behavior of ceramics. In this work, the mechanical properties of ceramic foams produced by the aeration of ceramic suspensions associated to the polymerization of previously added monomers (gelcasting process is investigated. The macrostructure that results from this process is constituted of nearly

  3. Recrystallization of polycrystalline silicon

    Science.gov (United States)

    Lall, C.; Kulkarni, S. B.; Graham, C. D., Jr.; Pope, D. P.

    1981-01-01

    Optical metallography is used to investigate the recrystallization properties of polycrystalline semiconductor-grade silicon. It is found that polycrystalline silicon recrystallizes at 1380 C in relatively short times, provided that the prior deformation is greater than 30%. For a prior deformation of about 40%, the recrystallization process is essentially complete in about 30 minutes. Silicon recrystallizes at a substantially slower rate than metals at equivalent homologous temperatures. The recrystallized grain size is insensitive to the amount of prestrain for strains in the range of 10-50%.

  4. Reuse of activated alumina

    Energy Technology Data Exchange (ETDEWEB)

    Hobensack, J.E. [Martin Marietta Energy Systems, Inc., Piketon, OH (United States)

    1991-12-31

    Activated alumina is used as a trapping media to remove trace quantities of UF{sub 6} from process vent streams. The current uranium recovery method employs concentrated nitric acid which destroys the alumina pellets and forms a sludge which is a storage and disposal problem. A recently developed technique using a distilled water rinse followed by three dilute acid rinses removes on average 97% of the uranium, and leaves the pellets intact with crush strength and surface area values comparable with new material. Trapping tests confirm the effectiveness of the recycled alumina as UF{sub 6} trapping media.

  5. Fabrication of ZrO2 Toughened Al2O3 Ceramic through Gelcasting Process%注凝成型制备氧化锆增韧氧化铝陶瓷

    Institute of Scientific and Technical Information of China (English)

    张超; 丘泰; 杨建; 郭坚

    2012-01-01

    采用低毒单体N,N-二甲基丙烯酰胺(DMAA)制备了氧化锆增韧氧化铝(ZrO2/Al2 O3,ZTA)陶瓷,氧化铝与氧化锆的质量比为3∶1,浆料的固相体积分数为50 vol%.讨论了不同干燥方式对干燥速率以及坯体性能的影响,研究了不同成型温度对坯体性能的影响.通过研究发现,在湿热烘箱中干燥的坯体强度最高,成型温度应控制在65℃附近.通过对不同单体含量的坯体烧结后陶瓷性能的对比,发现单体的加入量为10wt%左右较好,通过与干压成型陶瓷性能的对比,发现注凝成型得到的陶瓷强度和韧性分别提高了42.2%和23.5%,达到640 MPa和6.3MPa.m1/2,通过扫描电镜图片分析发现,注凝成型制得的陶瓷结构更均匀.%ZTA(Zirconia toughened alumina)composite ceramics were prepared using a low-toxicity monomer N,N-dimethyl acrylamide(DMAA) ,mass ratio of Al2O3 to ZrO2 is 3:1 ,the solid loading of suspension is 50 vol%. The effect of dehydration mode on the dehydration rate and property of green body were discussed. The effect of different polymerize temperature to the strength of green bodies were investigated. The result show that the green bodies dried in moist heat oven had the highest strength and the polymerize temperature should be hold on about 65℃. The properties of ZTA ceramics sintered with green bodies of different DMAA content had been compared, and the best DMAA content was 10wt%. By contrasting the mechanical properties of sintered bodies made by gelcasting and dry pressing, the bending strength and fracture toughness of the ceramics made by gelcasting increased about 42.2% and 23.5% than dry pressing, reaching 640 Mpa and 6. 3 Mpa · M1/2, respectively. SEM images show that ceramics made by gelcasting have more uniform microstructure than dry pressing.

  6. Effect of Sintering Temperature on the Properties of Fused Silica Ceramics Prepared by Gelcasting

    Science.gov (United States)

    Wan, Wei; Huang, Chun-e.; Yang, Jian; Zeng, Jinzhen; Qiu, Tai

    2014-07-01

    Fused silica ceramics were fabricated by gelcasting, by use of a low-toxicity N' N-dimethylacrylamide gel system, and had excellent properties compared with those obtained by use of the low-toxicity 2-hydroxyethyl methacrylate and toxic acrylamide systems. The effect of sintering temperature on the microstructure, mechanical and dielectric properties, and thermal shock resistance of the fused silica ceramics was investigated. The results showed that sintering temperature has a critical effect. Use of an appropriate sintering temperature will promote densification and improve the strength, thermal shock resistance, and dielectric properties of fused silica ceramics. However, excessively high sintering temperature will greatly facilitate crystallization of amorphous silica and result in more cristobalite in the sample, which will cause deterioration of these properties. Fused silica ceramics sintered at 1275°C have the maximum flexural strength, as high as 81.32 MPa, but, simultaneously, a high coefficient of linear expansion (2.56 × 10-6/K at 800°C) and dramatically reduced residual flexural strength after thermal shock (600°C). Fused silica ceramics sintered at 1250°C have excellent properties, relatively high and similar flexural strength before (67.43 MPa) and after thermal shock (65.45 MPa), a dielectric constant of 3.34, and the lowest dielectric loss of 1.20 × 10-3 (at 1 MHz).

  7. Influência do tempo de indução nas propriedades de hidroxiapatita porosa obtida por gelcasting de espumas Influence of the induction time on the properties of porous hydroxyapatite obtained by gelcasting foams

    Directory of Open Access Journals (Sweden)

    T. M. Volkmer

    2007-12-01

    Full Text Available Hidroxiapatita é uma cerâmica bioativa que permite o crescimento de tecido ósseo e revascularização da área implantada pela formação de ligação com a fase mineral dos ossos. Este estudo teve como objetivo a obtenção de blocos porosos de hidroxiapatita através do método gelcasting de espuma, sem a utilização de atmosfera controlada para a realização das polimerizações. O processo gelcasting de espumas consiste na incorporação de uma fase gasosa dispersa dentro de uma suspensão cerâmica contendo o pó cerâmico, água, defloculantes, ligantes e agentes de gelificação. O sistema de gelificação consiste no monômero acrilamida e no co-monômero N,N’ metilenobisacrilamida difuncional (MBAM. Foi estudada a variação das quantidades de iniciador e de acelerador e verificou-se a variação do tempo de indução e seus reflexos nas propriedades da hidroxiapatita porosa. Avaliou-se a porosidade, a macroestrutura, a distribuição de tamanho de poros e a permeabilidade. Verificou-se que é possível controlar a porosidade variando-se o tempo de indução e a ausência de atmosfera controlada não impediu a obtenção das peças porosas.Hydroxyapatite (HA is a bioactive ceramic that allows bone growth and revascularization of the area of implantation trough the formation of chemical bonding with the mineral phase of the bones. The aim of this work was to obtain porous blocks of HA by the gelcasting foams method without atmosphere control. The gelcasting foams process consists in the incorporation of a dispersed gaseous phase, with the help of a surfactant, inside a ceramic suspension containing the ceramic powder, water and gelation agents. The gelation system is composed by one monomer, acrylamide, and one comonomer, methylenebisacrylamide (MBAM. The effect of the accelerator and initiator amounts on the induction time, porosity, pore size distribution and permeability was evaluated. It was possible to control the porosity

  8. Effect of magnesium addition on the wetting of alumina by aluminium

    Science.gov (United States)

    Sangghaleh, Ali; Halali, Mohammad

    2009-07-01

    In this report the wetting behaviour between polycrystalline alumina substrates and molten aluminium doped with magnesium as a wetting agent has been studied using the sessile drop technique. The time required for equilibrium attainment is investigated. To explore the formation of possible phases at the interface, electron microscopic studies along with EDX analysis have been employed. It is found that magnesium reduces the time and temperature required for equilibrium in the Al/Al 2O 3 system. The Al-7 wt% Mg and Al-10 wt% Mg alloys can wet alumina at temperatures as low as 900 °C. It is also found that molten aluminium doped with magnesium can wet polycrystalline alumina at temperatures below 1000 °C. A thin reaction layer was observed at the Al-Mg/Al 2O 3 interface in the present study.

  9. 利用光固化快速成形技术和凝胶注模工艺制备变周期电磁晶体%Fabrication of the Period-varying Electromagnetic Band-gap Structure Using Stereolithography and Gel-casting

    Institute of Scientific and Technical Information of China (English)

    袁智慧; 李涤尘; 田小永; 胡亚文; 代伟; 汪宏

    2011-01-01

    提出了一种光固化快速成形技术及凝胶注模工艺制备变周期电磁带隙晶体的工艺路线,结构材料是氧化铝陶瓷.研究了该工艺制备得到的电磁带隙晶体的微现形貌,及其在8~13 GHz微波段的带隙特性,并对比了不同比例拉伸后的变周期结构和标准结构的微波带隙特征.测试结果发现,与同等外形结构尺寸的周期性结构相比,变周期金刚石EBG结构的带隙特性呈现了规律性的变化.%A processing procedure was proposed to fabricate electromagnetic crystals using stereolithography (SL) and gelcasting system. The electromagnetic crystals were made from alumina-slurry dielectric composites. The SEM photograph of ceramic sample showed that alumina ceramic grain was homogeneous. And their microwave properties were researched in the range 8~13 GHz. The periodvarying diamond EBG structures were obtained by stretching lattices in the direction 〈 100 〉. It is found that the period-varying diamond EBG structure, compared with the same dimensional period diamond EBG structure, have some regular changes.

  10. Hierarchical structures of β-TCP/45S5 bioglass hybrid scaffolds prepared by gelcasting.

    Science.gov (United States)

    Lopes, João Henrique; Magalhães, Jéssica Aparecida; Gouveia, Rubia Figueredo; Bertran, Celso Aparecido; Motisuke, Mariana; Camargo, Samira E A; Trichês, Eliandra de Sousa

    2016-09-01

    This paper investigates the microstructure and the mechanical properties of β-tricalcium phosphate (β-TCP) three-dimensional (3D) porous materials reinforced with 45S5 bioactive glass (BG). β-TCP and β-TCP/x%-BG scaffolds with interconnected pores networks, suitable for bone regeneration, were fabricated by gel-casting method. Mechanical properties, porosity, and morphological characteristics were evaluated by compressive strength test, scanning electron microscopy (SEM) and X-ray microtomography analysis, whereas the structures were fully explored by XRD, and Raman spectroscopy. To the best of our knowledge, this is the first time where the mechanism for understanding the effect of bioglass on the mechanical properties and microstruture of β-TCP/45S5-BG scaffolds has been systematically studied. The findings showed that ionic product lixiviated from 45S5 bioactive glass, rich in silicon species and sodium ion, catalyzes a phase transition from β-TCP to Si-TCP by replacement of phosphorus for silicon and contributes to the improvement of scaffolds mechanical properties. The compressive strength of β-TCP/5%-BG and β-TCP/7.5%-BG was improved around 200% in comparison to pure β-TCP. Osteoblast-like cells (MG 63) were exposed to the materials for 24h through the use of medium conditioned by β-tricalcium phosphate/bioactive glass. Cell viability was measured by MTT assay in the cells and the data obtained were submitted to ANOVA, Tukey׳s multiple comparison (pTCP/7.5-BG promoted an increase of cell proliferation. The results suggest that compositions and processing method studied may provide appropriate materials for tissue engineering.

  11. Anelasticity of polycrystalline indium

    Energy Technology Data Exchange (ETDEWEB)

    Sapozhnikov, K., E-mail: k.sapozhnikov@mail.ioffe.ru [A.F.Ioffe Physical-Technical Institute, Politekhnicheskaya 26, 194021 St. Petersburg (Russian Federation); Golyandin, S. [A.F.Ioffe Physical-Technical Institute, Politekhnicheskaya 26, 194021 St. Petersburg (Russian Federation); Kustov, S. [Dept. de Fisica, Universitat de les Illes Balears, Cra Valldemossa km 7.5, E 07122 Palma de Mallorca (Spain)

    2009-09-15

    Mechanisms of anelasticity of polycrystalline indium have been studied over wide ranges of temperature (7-320 K) and strain amplitude (2 x 10{sup -7}-3.5 x 10{sup -4}). Measurements of the internal friction and Young's modulus have been performed by means of the piezoelectric resonant composite oscillator technique using longitudinal oscillations at frequencies of about 100 kHz. The stages of the strain amplitude dependence of the internal friction and Young's modulus defect, which can be attributed to dislocation - point defect and dislocation - dislocation interactions, have been revealed. It has been shown that thermal cycling gives rise to microplastic straining of polycrystalline indium due to the anisotropy of thermal expansion and to appearance of a 'recrystallization' internal friction maximum in the temperature spectra of amplitude-dependent anelasticity. The temperature range characterized by formation of Cottrell's atmospheres of point defects around dislocations has been determined from the acoustic data.

  12. Stability of trapped charges in sapphires and alumina ceramics: Evaluation by secondary electron emission

    Science.gov (United States)

    Zarbout, K.; Si Ahmed, A.; Moya, G.; Bernardini, J.; Goeuriot, D.; Kallel, A.

    2008-03-01

    The stability of trapped charges in sapphires and alumina ceramics is characterized via an experimental parameter expressing the variation of the secondary electron emission yield between two electron injections performed in a scanning electron microscope. Two types of sapphires and polycrystalline alumina, which differ mainly by their impurity content, are investigated in the temperature range 300-663K. The stable trapping behavior in sapphires is attributed to trapping in different defects, whose nature depends on the purity level. In alumina ceramics, the ability to trap charges in a stable way is stronger in samples of high impurity content. In the low impurity samples, stable trapping is promoted when the grain diameter decreases, whereas the reverse is observed in high impurity materials. These behaviors can stem from a gettering effect occurring during sintering. The strong dependence of the variation of the secondary electron emission yield on the grain diameter and impurities enables a scaling of the stable trapping ability of alumina materials.

  13. Bauxite and alumina

    Science.gov (United States)

    Bray, E.L.

    2010-01-01

    The article reports on the global market performance of bauxite and alumina in 2009 and presents an outlook for their 2010 performance. There were only several U.S. states that could produce bauxite and bauxitic clays including Georgia, Arkansas, and Alabama. The prices for imported refractory-grade calcined bauxite ranged between 426 U.S. dollars and 554 dollars per ton.

  14. Prediction of alumina penetration

    Energy Technology Data Exchange (ETDEWEB)

    Mandell, D A

    1993-02-01

    The MESA hydrocode was used to predict two-dimensional tests of L/D 10 and L/D 15 tungsten rods impacting AD 90 alumina with a steel backing. The residual penetration into the steel is the measured quantity in these experiments conducted at the Southwest Research Institute (SWR). The interface velocity as a function of time between an alumina target and a lithium fluoride window, impacted by an alumina disk at velocities between 544 m/s and 2329 m/s, was also predicted. These one-dimensional flyer plate experiments were conducted at Sandia National Laboratories using Coors AD 995 alumina. The material strength and fracture models are important in the prediction of ceramic experiments. The models used in these predictions are discussed. The penetrations in the two-dimensional tests were predicted to 11.4 percent or better. In five of the six experiments, the predicted penetration depth was deeper than the measured value. This trend is expected since the calculation is based on ideal conditions. The results show that good agreement between the 1-D flyer plate data and the MESA predictions exists at the lower impact velocities, but the maximum velocity is overpredicted as the flyer plate velocity increases. At a flyer plate velocity of 2329 m/s the code overpredicted the data by 12.3 percent.

  15. Alumina Technology Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2002-02-01

    The Alumina Technology Roadmap outlines a comprehensive long-term research and development plan that defines the industry's collective future and establishes a clear pathway forward. It emphasizes twelve high-priority R&D areas deemed most significant in addressing the strategic goals.

  16. Factors contributing to the breakdown of sodium beta-alumina

    Energy Technology Data Exchange (ETDEWEB)

    Buechele, A.C.

    1982-05-01

    Clarification of the breakdown process occurring during charge transfer in sodium beta alumina solid electrolytes was derived from: (1) studying the effects of molten sodium contact at 350/sup 0/C on single crystal sodium beta alumina and polycrystalline sodium beta alumina; (2) determination of critical current density by monitoring acoustic emissions accompanying crack growth in sodium/sodium beta alumina/sodium cells subjected to linear current ramping at 1 mA cm/sup -2/ sec/sup -1/; (3) failure analysis conducted on cycled electrolytes, some from commercial sodium/sulfur cells, which had been subjected to up to 703 Ahr cm/sup -2/ of charge transfer. Gray coloration developing in beta aluminas in contact with molten sodium was found to be a consequence of formation, through reduction by sodium, of oxygen vacancies charge compensated by electrons. Electronic conductivity of the electrolyte increases as a result. No second phase formation was detected. Colored electrolytes from sodium/sulfur cells show evidence of a newly recognized degradation mechanism in which fracture occurs when sodium is reduced and deposited internally under pressure as metal in regions where an electronic conductivity gradient exists. Heating colored beta aluminas in air produces reoxidation and bleaching. Kinetics and other properties of the coloration and bleaching processes were determined. Critical current density was found to bear an inverse relation to average electrolyte grain size. Evidence was found in the cycled electrolytes for a slow crack growth mechanism and a progressive mode of degradation advancing from the sulfur electrode interface. Implications of the findings for the construction and operation of sodium/sulfur battery systems are discussed.

  17. Electrical characteristics of polycrystalline Si layers embedded into high- k Al 2O 3 gate layers

    Science.gov (United States)

    Park, Byoungjun; Cho, Kyoungah; Kim, Sangsig

    2008-09-01

    The electrical characteristics of polycrystalline Si (poly Si) layers embedded into high- k Al 2O 3 (alumina) gate layers are investigated in this work. The capacitance versus voltage ( C- V) curves obtained from the metal-alumina-polysilicon-alumina-silicon (MASAS) capacitors exhibit significant threshold voltage shifts, and the width of their hysteresis window is dependent on the range of the voltage sweep. The counterclockwise hysteresis observed in the C- V curves indicates that electrons originating from the p-type Si substrate in the inversion condition are trapped in the floating gate layer consisting of the poly Si layer present between the top and bottom Al 2O 3 layers in the MASAS capacitor. Also, current versus voltage ( I- V) measurements are performed to examine the electrical characteristics of the fabricated capacitors. The I- V measurements reveal that our MASAS capacitors show a very low leakage current density, compared to the previously reported results.

  18. Seebeck effect in polycrystalline semiconductors

    Energy Technology Data Exchange (ETDEWEB)

    Jerhot, J.; Vlcek, J.

    1982-06-18

    The paper deals with the interpretation of the Seebeck coefficient measured for a polycrystalline semiconductor. Polycrystalline semiconductors are considered to be composed of grains separated from one another by intergrain domains. An isotype heterojunction with a certain density of interface states is assumed to exist at the grain-intergrain domain interface. The general formula for the Seebeck coefficient under these conditions is derived. The relations valid for systems of practical interest are shown as limiting cases of the formula presented.

  19. Influência do tempo de indução nas propriedades de hidroxiapatita porosa obtida por gelcasting de espumas

    OpenAIRE

    2007-01-01

    Hidroxiapatita é uma cerâmica bioativa que permite o crescimento de tecido ósseo e revascularização da área implantada pela formação de ligação com a fase mineral dos ossos. Este estudo teve como objetivo a obtenção de blocos porosos de hidroxiapatita através do método gelcasting de espuma, sem a utilização de atmosfera controlada para a realização das polimerizações. O processo gelcasting de espumas consiste na incorporação de uma fase gasosa dispersa dentro de uma suspensão cerâmica contend...

  20. Calcium aluminate in alumina

    Science.gov (United States)

    Altay, Arzu

    The properties of ceramic materials are determined not only by the composition and structure of the phases present, but also by the distribution of impurities, intergranular films and second phases. The phase distribution and microstructure both depend on the fabrication techniques, the raw materials used, the phase-equilibrium relations, grain growth and sintering processes. In this dissertation research, various approaches have been employed to understand fundamental phenomena such as grain growth, impurity segregation, second-phase formation and crystallization. The materials system chosen was alumina intentionally doped with calcium. Atomic-scale structural analyses of grain boundaries in alumina were carried on the processed samples. It was found that above certain calcium concentrations, CA6 precipitated as a second phase at all sintering temperatures. The results also showed that abnormal grain growth can occur after precipitation and it is not only related to the calcium level, but it is also temperature dependent. In order to understand the formation mechanism of CA6 precipitates in calcium doped alumina samples, several studies have been carried out using either bulk materials or thin films The crystallization of CA2 and CA6 powders has been studied. Chemical processing techniques were used to synthesize the powders. It was observed that CA2 powders crystallized directly, however CA6 powders crystallized through gamma-Al 2O3 solid solution. The results of energy-loss near-edge spectrometry confirmed that gamma-Al2O3 can dissolve calcium. Calcium aluminate/alumina reaction couples have also been investigated. All reaction couples were heat treated following deposition. It was found that gamma-Al2O3 was formed at the interface as a result of the interfacial reaction between the film and the substrate. gamma-Al 2O3 at the interface was stable at much higher temperatures compared to the bulk gamma-Al2O3 formed prior to the CA6 crystallization. In order to

  1. Bauxite Mining and Alumina Refining

    Science.gov (United States)

    Frisch, Neale; Olney, David

    2014-01-01

    Objective: To describe bauxite mining and alumina refining processes and to outline the relevant physical, chemical, biological, ergonomic, and psychosocial health risks. Methods: Review article. Results: The most important risks relate to noise, ergonomics, trauma, and caustic soda splashes of the skin/eyes. Other risks of note relate to fatigue, heat, and solar ultraviolet and for some operations tropical diseases, venomous/dangerous animals, and remote locations. Exposures to bauxite dust, alumina dust, and caustic mist in contemporary best-practice bauxite mining and alumina refining operations have not been demonstrated to be associated with clinically significant decrements in lung function. Exposures to bauxite dust and alumina dust at such operations are also not associated with the incidence of cancer. Conclusions: A range of occupational health risks in bauxite mining and alumina refining require the maintenance of effective control measures. PMID:24806720

  2. Alumina Matrix Composites with Non-Oxide Nanoparticle Addition and Enhanced Functionalities

    Directory of Open Access Journals (Sweden)

    Dušan Galusek

    2015-01-01

    Full Text Available The addition of SiC or TiC nanoparticles to polycrystalline alumina matrix has long been known as an efficient way of improving the mechanical properties of alumina-based ceramics, especially strength, creep, and wear resistance. Recently, new types of nano-additives, such as carbon nanotubes (CNT, carbon nanofibers (CNF, and graphene sheets have been studied in order not only to improve the mechanical properties, but also to prepare materials with added functionalities, such as thermal and electrical conductivity. This paper provides a concise review of several types of alumina-based nanocomposites, evaluating the efficiency of various preparation methods and additives in terms of their influence on the properties of composites.

  3. Anisotropic thermal conductivity of thin polycrystalline oxide samples

    Directory of Open Access Journals (Sweden)

    A. Tiwari

    2013-11-01

    Full Text Available This paper reports about the development of a modified laser-flash technique and relation to measure the in-plane thermal diffusivity of thin polycrystalline oxide samples. Thermal conductivity is then calculated with the product of diffusivity, specific heat and density. Design and operating features for evaluating in-plane thermal conductivities are described. The technique is advantageous as thin samples are not glued together to measure in-plane thermal conductivities like earlier methods reported in literature. The approach was employed to study anisotropic thermal conductivity in alumina sheet, textured kaolin ceramics and montmorillonite. Since it is rare to find in-plane thermal conductivity values for such anisotropic thin samples in literature, this technique offers a useful variant to existing techniques.

  4. Anisotropic thermal conductivity of thin polycrystalline oxide samples

    Energy Technology Data Exchange (ETDEWEB)

    Tiwari, A., E-mail: abhishektiwariiitr@gmail.com [Groupe d’Etudes des Matériaux Hétérogènes (GEMH, EA 3178), Ecole Nationale Supérieure de Céramique Industrielle, 12, Rue Atlantis, 87068 Limoges Cedex (France); Department of Mechanical and Aerospace Engineering, Monash University, Melbourne, VIC 3800 (Australia); Boussois, K.; Nait-Ali, B.; Smith, D. S.; Blanchart, P. [Groupe d’Etudes des Matériaux Hétérogènes (GEMH, EA 3178), Ecole Nationale Supérieure de Céramique Industrielle, 12, Rue Atlantis, 87068 Limoges Cedex (France)

    2013-11-15

    This paper reports about the development of a modified laser-flash technique and relation to measure the in-plane thermal diffusivity of thin polycrystalline oxide samples. Thermal conductivity is then calculated with the product of diffusivity, specific heat and density. Design and operating features for evaluating in-plane thermal conductivities are described. The technique is advantageous as thin samples are not glued together to measure in-plane thermal conductivities like earlier methods reported in literature. The approach was employed to study anisotropic thermal conductivity in alumina sheet, textured kaolin ceramics and montmorillonite. Since it is rare to find in-plane thermal conductivity values for such anisotropic thin samples in literature, this technique offers a useful variant to existing techniques.

  5. Preparation of Zirconia Fiber/Mullite Light-weighted Composites Derived Through Gel-casting and Its Toughening Mechanism%ZrO2纤维/莫来石轻质复合材料的凝胶注模制备及其增韧机理研究

    Institute of Scientific and Technical Information of China (English)

    何江荣; 徐广平; 宋一华

    2013-01-01

    采用凝胶注模成型工艺制备了ZrO2纤维增韧莫来石复合陶瓷材料.借助透射电子显微镜(TEM)、扫描电子显微镜(SEM)、平板导热仪、单边切口梁法(SENB)等测试手段对样品微观形貌、导热系数、断裂韧性等进行研究;研究了分散剂对凝胶注模浆料团聚体的影响;讨论了ZrO2纤维增韧莫来石复合材料的增韧机理;概述了同时获得高韧性和高强度材料的途径.结果表明:添加ZrO2纤维能够明显提高莫来石的断裂韧性;当ZrO2纤维添加量(体积分数)为25%左右时可使莫来石轻质耐火复合材料兼具较低的热导率(λ=0.35 W·m-1·K-1,298 K)和优异的综合力学性能(KIC=7.6 MPa·m1/2,σb=270 MPa).%Zirconia fiber/mullite light-weighted composites were prepared by gel-casting technique.The microstructure,thermal conductivity and fracture toughness were characterized by means of transmission electron microscope (TEM),scanning electron microscope(SEM),plane table thermo-conductivity meter and single edge notched beam (SENB),etc.Effect of dispersing agent on agglomeration in gel-casting slurry was studied.The toughening mechanism of mullite light-weighted composites toughened by zirconia fiber was discussed.And the balance of high fracture toughness and high tensile strength were summarized.The results show that adding alumina fiber can advance the fracture toughness of mullite light-weighted composites significantly.The low thermal conductivity(λ=0.35W ·m-1 · K-1,298K) and high fracture toughness (KIC =7.6 MPa · m1/2,σb=270 MPa) were obtained simultaneously when the adding quantity of zirconia fiber was controlled around 25 vol%.

  6. Positron lifetime in polycrystalline gadolinium

    Energy Technology Data Exchange (ETDEWEB)

    Gomez, A.M.; Serna, J. (Universidad Complutense de Madrid (Spain). Dept. de Fisica del Estado Solido)

    1984-06-16

    Positron lifetimes are measured on polycrystalline gadolinium between 15 and 25 /sup 0/C taking into account the microstructure of the specimens, especially the grain sizes of untreated or annealed sheets. Results show the existence of a trapping effect of positrons in Gd due to different trapping centers such as point defects, dislocations, grain boundaries, and other defects.

  7. Alumina-magnesia Refractory Castables

    Institute of Scientific and Technical Information of China (English)

    Wang Jing

    2010-01-01

    @@ 1 Scope This standard specifies the classification,technical requirements,test methods,quality appraisal procedures,packing,marking,transportation,storage,and quality certificate of alumina-magnesia refractory castables.

  8. Porous bodies of hydroxyapatite produced by a combination of the gel-casting and polymer sponge methods.

    Science.gov (United States)

    González Ocampo, Jazmín I; Escobar Sierra, Diana M; Ossa Orozco, Claudia P

    2016-03-01

    A combination of gel-casting and polymeric foam infiltration methods is used in this study to prepare porous bodies of hydroxyapatite (HA), to provide a better control over the microstructures of samples. These scaffolds were prepared by impregnating a body of porous polyurethane foam with slurry containing HA powder, and using a percentage of solids between 40% and 50% w/v, and three different types of monomers to provide a better performance. X-Ray Diffraction (XRD), and Fourier Transformed Infrared (FTIR) and Scanning Electron Microscopy (SEM) were employed to evaluate both the powder hydroxyapatite and the scaffolds obtained. In addition, porosity and interconnectivity measurements were taken in accordance with the international norm. Bioactivity was checked using immersion tests in Simulated Body Fluids (SBF). After the sintering process of the porous bodies, the XRD results showed peaks characteristic of a pure and crystalline HA (JCPDS 9-432) as a single phase. SEM images indicate open and interconnected pores inside the material, with pore sizes between 50 and 600 μm. Also, SEM images demonstrate the relatively good bioactivity of the HA scaffolds after immersion in SBF. All results for the porous HA bodies suggest that these materials have great potential for use in tissue engineering.

  9. Effect of organic additives on mechanical properties of SiC ceramics prepared by a modified gelcasting method

    Directory of Open Access Journals (Sweden)

    Feng Wang

    2016-12-01

    Full Text Available A novel and simple gel system of isobutylene and maleic anhydride (PIBM was used to prepare SiC ceramics. The rheological behaviour of the SiC slurries was investigated as function of organic additives. The SiC slurries with 0.2 wt.% PIBM and 0.2 wt.% tetramethylammonium hydroxide (TMAH showed low viscosity, which was favourable for casting SiC green bodies. In order to obtain homogeneous green bodies, polyvinyl alcohol (PVA was used to assist the dispersion of carbon black in the slurries, and polyethylene glycol (PEG was added to inhibit the surface exfoliation of green bodies. The content of PVA was controlled carefully to avoid the warpage of green bodies during the drying process. Finally, homogeneous defect-free SiC green bodies were successfully fabricated via aqueous gelcasting. The SiC ceramics sintered at 2100 °C (prepared from slurries with solid content of 60 wt.% showed an average flexural strength of 305.7 MPa with porosity of 19.92%.

  10. Polycrystalline thin films : A review

    Energy Technology Data Exchange (ETDEWEB)

    Valvoda, V. [Charles Univ., Prague (Czech Republic). Faculty of Mathematics and Physics

    1996-09-01

    Polycrystalline thin films can be described in terms of grain morphology and in terms of their packing by the Thornton`s zone model as a function of temperature of deposition and as a function of energy of deposited atoms. Grain size and preferred grain orientation (texture) can be determined by X-ray diffraction (XRD) methods. A review of XRD analytical methods of texture analysis is given with main attention paid to simple empirical functions used for texture description and for structure analysis by joint texture refinement. To illustrate the methods of detailed structure analysis of thin polycrystalline films, examples of multilayers are used with the aim to show experiments and data evaluation to determine layer thickness, periodicity, interface roughness, lattice spacing, strain and the size of diffraction coherent volumes. The methods of low angle and high angle XRD are described and discussed with respect to their complementary information content.

  11. Transparent polycrystalline cubic silicon nitride

    Science.gov (United States)

    Nishiyama, Norimasa; Ishikawa, Ryo; Ohfuji, Hiroaki; Marquardt, Hauke; Kurnosov, Alexander; Taniguchi, Takashi; Kim, Byung-Nam; Yoshida, Hidehiro; Masuno, Atsunobu; Bednarcik, Jozef; Kulik, Eleonora; Ikuhara, Yuichi; Wakai, Fumihiro; Irifune, Tetsuo

    2017-01-01

    Glasses and single crystals have traditionally been used as optical windows. Recently, there has been a high demand for harder and tougher optical windows that are able to endure severe conditions. Transparent polycrystalline ceramics can fulfill this demand because of their superior mechanical properties. It is known that polycrystalline ceramics with a spinel structure in compositions of MgAl2O4 and aluminum oxynitride (γ-AlON) show high optical transparency. Here we report the synthesis of the hardest transparent spinel ceramic, i.e. polycrystalline cubic silicon nitride (c-Si3N4). This material shows an intrinsic optical transparency over a wide range of wavelengths below its band-gap energy (258 nm) and is categorized as one of the third hardest materials next to diamond and cubic boron nitride (cBN). Since the high temperature metastability of c-Si3N4 in air is superior to those of diamond and cBN, the transparent c-Si3N4 ceramic can potentially be used as a window under extremely severe conditions. PMID:28303948

  12. Transport properties of alumina nanofluids

    Energy Technology Data Exchange (ETDEWEB)

    Wong, Kau-Fui Vincent; Kurma, Tarun [Department of Mechanical and Aerospace Engineering, University of Miami, Coral Gables, FL 33124 (United States)], E-mail: kwong@miami.edu

    2008-08-27

    Recent studies have showed that nanofluids have significantly greater thermal conductivity compared to their base fluids. Large surface area to volume ratio and certain effects of Brownian motion of nanoparticles are believed to be the main factors for the significant increase in the thermal conductivity of nanofluids. In this paper all three transport properties, namely thermal conductivity, electrical conductivity and viscosity, were studied for alumina nanofluid (aluminum oxide nanoparticles in water). Experiments were performed both as a function of volumetric concentration (3-8%) and temperature (2-50 deg. C). Alumina nanoparticles with a mean diameter of 36 nm were dispersed in water. The effect of particle size was not studied. The transient hot wire method as described by Nagaska and Nagashima for electrically conducting fluids was used to test the thermal conductivity. In this work, an insulated platinum wire of 0.003 inch diameter was used. Initial calibration was performed using de-ionized water and the resulting data was within 2.5% of standard thermal conductivity values for water. The thermal conductivity of alumina nanofluid increased with both increase in temperature and concentration. A maximum thermal conductivity of 0.7351 W m{sup -1} K{sup -1} was recorded for an 8.47% volume concentration of alumina nanoparticles at 46.6 deg. C. The effective thermal conductivity at this concentration and temperature was observed to be 1.1501, which translates to an increase in thermal conductivity by 22% when compared to water at room temperature. Alumina being a good conductor of electricity, alumina nanofluid displays an increasing trend in electrical conductivity as volumetric concentration increases. A microprocessor-based conductivity/TDS meter was used to perform the electrical conductivity experiments. After carefully calibrating the conductivity meter's glass probe with platinum tip, using a standard potassium chloride solution, readings were

  13. Transport properties of alumina nanofluids.

    Science.gov (United States)

    Wong, Kau-Fui Vincent; Kurma, Tarun

    2008-08-27

    Recent studies have showed that nanofluids have significantly greater thermal conductivity compared to their base fluids. Large surface area to volume ratio and certain effects of Brownian motion of nanoparticles are believed to be the main factors for the significant increase in the thermal conductivity of nanofluids. In this paper all three transport properties, namely thermal conductivity, electrical conductivity and viscosity, were studied for alumina nanofluid (aluminum oxide nanoparticles in water). Experiments were performed both as a function of volumetric concentration (3-8%) and temperature (2-50 °C). Alumina nanoparticles with a mean diameter of 36 nm were dispersed in water. The effect of particle size was not studied. The transient hot wire method as described by Nagaska and Nagashima for electrically conducting fluids was used to test the thermal conductivity. In this work, an insulated platinum wire of 0.003 inch diameter was used. Initial calibration was performed using de-ionized water and the resulting data was within 2.5% of standard thermal conductivity values for water. The thermal conductivity of alumina nanofluid increased with both increase in temperature and concentration. A maximum thermal conductivity of 0.7351 W m(-1) K(-1) was recorded for an 8.47% volume concentration of alumina nanoparticles at 46.6 °C. The effective thermal conductivity at this concentration and temperature was observed to be 1.1501, which translates to an increase in thermal conductivity by 22% when compared to water at room temperature. Alumina being a good conductor of electricity, alumina nanofluid displays an increasing trend in electrical conductivity as volumetric concentration increases. A microprocessor-based conductivity/TDS meter was used to perform the electrical conductivity experiments. After carefully calibrating the conductivity meter's glass probe with platinum tip, using a standard potassium chloride solution, readings were taken at

  14. Casting larger polycrystalline silicon ingots

    Energy Technology Data Exchange (ETDEWEB)

    Wohlgemuth, J.; Tomlinson, T.; Cliber, J.; Shea, S.; Narayanan, M.

    1995-08-01

    Solarex has developed and patented a directional solidification casting process specifically designed for photovoltaics. In this process, silicon feedstock is melted in a ceramic crucible and solidified into a large grained semicrystalline silicon ingot. In-house manufacture of low cost, high purity ceramics is a key to the low cost fabrication of Solarex polycrystalline wafers. The casting process is performed in Solarex designed casting stations. The casting operation is computer controlled. There are no moving parts (except for the loading and unloading) so the growth process proceeds with virtually no operator intervention Today Solarex casting stations are used to produce ingots from which 4 bricks, each 11.4 cm by 11.4 cm in cross section, are cut. The stations themselves are physically capable of holding larger ingots, that would yield either: 4 bricks, 15 cm by 15 an; or 9 bricks, 11.4 cm by 11.4 an in cross-section. One of the tasks in the Solarex Cast Polycrystalline Silicon PVMaT Program is to design and modify one of the castings stations to cast these larger ingots. If successful, this effort will increase the production capacity of Solarex`s casting stations by 73% and reduce the labor content for casting by an equivalent percentage.

  15. Fracture behaviour of polycrystalline tungsten

    Science.gov (United States)

    Gaganidze, Ermile; Rupp, Daniel; Aktaa, Jarir

    2014-03-01

    Fracture behaviour of round blank polycrystalline tungsten was studied by means of three point bending Fracture-Mechanical (FM) tests at temperatures between RT and 1000 °C and under high vacuum. To study the influence of the anisotropic microstructure on the fracture toughness (FT) and ductile-to-brittle transition (DBT) the specimens were extracted in three different, i.e. longitudinal, radial and circumferential orientations. The FM tests yielded distinctive fracture behaviour for each specimen orientation. The crack propagation was predominantly intergranular for longitudinal orientation up to 600 °C, whereas transgranular cleavage was observed at low test temperatures for radial and circumferentially oriented specimens. At intermediate test temperatures the change of the fracture mode took place for radial and circumferential orientations. Above 800 °C all three specimen types showed large ductile deformation without noticeable crack advancement. For longitudinal specimens the influence of the loading rate on the FT and DBT was studied in the loading rate range between 0.06 and 18 MPa m1/2/s. Though an increase of the FT was observed for the lowest loading rate, no resolvable dependence of the DBT on the loading rate was found partly due to loss of FT validity. A Master Curve approach is proposed to describe FT vs. test temperature data on polycrystalline tungsten. Fracture safe design space was identified by analysis compiled FT data.

  16. Ion guiding in alumina capillaries

    DEFF Research Database (Denmark)

    Juhász, Z.; Sulik, B.; Biri, S.

    2009-01-01

    Transmission of a few keV impact energy Ne ions through capillaries in anodic alumina membranes has been studied with different ion counting methods using an energy dispersive electrostatic spectrometer, a multichannel plate (MCP) array and sensitive current-measurement. In the present work, we...

  17. Alumina Coating on Carbon Fibers by Sol-Gel Method

    OpenAIRE

    2006-01-01

    Alumina precursor film was coated on carbon fibers by a sol-gel method using aluminum alkoxide solution. The optimum coating condition for the concentration of alumina alkoxide and silane coupling agent was determined to uniformly coat alumina precursor on carbon fibers. Alumina precursor converted to alumina ceramics by heating at 750℃. SEM and EPMA showed that alumina ceramics was uniformly coated on carbon fibers. The thickness of alumina layer increased with increasing coating times. The ...

  18. Properties of Ni and Ni–Fe nanowires electrochemically deposited into a porous alumina template

    Directory of Open Access Journals (Sweden)

    Alla I. Vorobjova

    2016-11-01

    Full Text Available The comparative analysis of the electrochemical deposition of Ni and Ni–Fe nanowires (NWs into ordered porous alumina templates is presented. The method developed allows for obtaining NWs of 50 ± 5 nm in diameter and 25 μm in length, i.e., with an aspect ratio of 500. XRD data demonstrate the polycrystalline nature of Ni and Ni–Fe in a face-centered cubic close-packed lattice. Both fabricated materials, Ni and Ni–Fe, have shown ferromagnetic properties. The specific magnetization value of Ni–Fe NWs in the alumina template is higher than that of the Ni sample and bulk Ni, also the Curie temperature of the Ni–Fe sample (790 K is higher than that of the Ni sample one or bulk Ni.

  19. Quantitative assessments of residual stress fields at the surface of alumina hip joints.

    Science.gov (United States)

    Pezzotti, Giuseppe; Munisso, Maria Chiara; Lessnau, Kristina; Zhu, Wenliang

    2010-11-01

    In-depth and in-plane response functions of photo- and electro-stimulated probes have been modeled and quantitatively evaluated in order to assess their suitability to detect the highly graded residual stress fields generated at the surface of alumina hip joints. Optical calibrations revealed large differences in probe size, which strongly affected the detected magnitude of residual stress. A comparison between the responses of Raman and fluorescence probes in polycrystalline alumina showed that the depth of those probes spread to an extent in the order of the tens of microns even with using a confocal probe configuration. On the other hand, the electro-stimulated luminescence emitted by oxygen vacancy sites (F(+) center) in the alumina lattice represented the most suitable choice for confining to a shallow volume the stress probe. This latter probe enabled us to reduce the measurement depth to the order of the tens of nanometers. We show maps of surface residual stress as collected on both main-wear and nonwear zones of an alumina femoral head. A comparison among stress maps taken at exactly the same location, but employing different probes, revealed averaging effects on the stress magnitude detected with photo-stimulated probes, while proving the superior spatial resolution of the electron probe.

  20. Shock waves in polycrystalline iron.

    Science.gov (United States)

    Kadau, Kai; Germann, Timothy C; Lomdahl, Peter S; Albers, Robert C; Wark, Justin S; Higginbotham, Andrew; Holian, Brad Lee

    2007-03-30

    The propagation of shock waves through polycrystalline iron is explored by large-scale atomistic simulations. For large enough shock strengths the passage of the wave causes the body-centered-cubic phase to transform into a close-packed phase with most structure being isotropic hexagonal-close-packed (hcp) and, depending on shock strength and grain orientation, some fraction of face-centered-cubic (fcc) structure. The simulated shock Hugoniot is compared to experiments. By calculating the extended x-ray absorption fine structure (EXAFS) directly from the atomic configurations, a comparison to experimental EXAFS measurements of nanosecond-laser shocks shows that the experimental data is consistent with such a phase transformation. However, the atomistically simulated EXAFS spectra also show that an experimental distinction between the hcp or fcc phase is not possible based on the spectra alone.

  1. Processing and Performance of Alumina Fiber Reinforced Alumina Composites

    Institute of Scientific and Technical Information of China (English)

    P.Y.Lee; T.Uchijima; T.Yano

    2003-01-01

    Processing of alumina fiber-reinforced alumina matrix composites by hot-pressing was described. The mechanical properties of the composites fabricated by different sintering conditions including temperature and pressure have been investigated. The results indicated that the higher sintering temperature and pressure corresponded to the higher bulk density and higher maximum strength of the composite, whereas the pseudo-ductility of the composite was lower. The preliminary results of the composite with monazite-coated fibers showed that maximum strength could be improved up to 35% compared with the noncoated fiber composite in the same sintering condition. Moreover, the fracture behavior of the composite changed from completely brittle fracture to non-brittle fracture under the suitable sintering conditions. SEM observation of the fracture surface indicated that the coating worked as a protective barrier and avoided sintering of the fibers together even at high temperature and pressure during densification process.

  2. Sintering behaviour of spinel–alumina composites

    Indian Academy of Sciences (India)

    Soumen Pal; A K Bandyopadhyay; P G Pal; S Mukherjee; B N Samaddar

    2009-04-01

    Study of alumina–magnesia binary phase diagram reveals that around 40–50 wt% alumina dissolves in spinel (MgAl2O4) at 1600°C. Solid solubility of alumina in spinel decreases rapidly with decreasing temperature, which causes exsolution of alumina from spinel phase. Previous work of one of the authors revealed that the exsolution of alumina makes some interlocking structures in between alumina and spinel phases. In the present investigation, refractory grade calcined alumina and spinel powder were used to make different batch compositions. Green pellets, formed at a pressure of 1550 kg cm-2 were fired at different temperatures of 1500°, 1550° and 1600°C for 2 h soaking time. Bulk density, percent apparent porosity, firing shrinkage etc were measured at each temperature. Sintering results were analysed to understand the mechanism of spinel–alumina interactions. SEM study of present samples does not reveal the distinct precipitation of needle shaped -alumina from spinel, but has some effect on densification process of spinel–alumina composites. Microstructural differences between present and previous work suggest an ample scope of further work in spinel–alumina composites.

  3. FABRICATION OF POROUS ALUMINA CERAMICS WITH HIGH POROSITY AND HIGH STRENGTH%高气孔率及高强度多孔氧化铝陶瓷的制备

    Institute of Scientific and Technical Information of China (English)

    刘伟渊; 汪长安; 周立忠; 黄勇

    2008-01-01

    In an ultra low solid loading slurry system constituted of tert-butyl alcohol,acrylamide and alumina powder,the influences of different dispersants and pH values on the slurry theology were investigated.When the dispersant is citric acid with a pH value of around 6,alumina slurry with 1 0%(in volume)solid loading exhibits the lowest viscosity.Since tert-butyl alcohol is extremely easy to volatilize,porous alumina ceramics with high porosity and high strength Were successfully fabricated by the gel-casting method.The effects of solid loading and sintering temperature on the porosity and compressive strength were also researched.The eompressive strength of sintered alumina ceramics with 74%porosity can over 8MPa.%在叔丁醇、丙烯酰胺、氧化铝组成的超低固相含量的浆料体系中,研究了分散剂、pH值等参数对浆料流变学性能的影响规律.采用柠檬酸作为分散剂、pH值约为6时,体积分数为10%的Al2O3浆料具有最低的黏度.利用叔丁醇极易挥发的特点,采用凝胶注模的工艺,制备了高气孔率及高强度的多孔氧化铝陶瓷,研究了固相含量和烧结温度对气孔率和压缩强度的影响规律,当气孔率为74%时,多孔氧化铝陶瓷的压缩强度在8MPa以上.

  4. Wettability of Aluminum on Alumina

    Science.gov (United States)

    Bao, Sarina; Tang, Kai; Kvithyld, Anne; Tangstad, Merete; Engh, Thorvald Abel

    2011-12-01

    The wettability of molten aluminum on solid alumina substrate has been investigated by the sessile drop technique in a 10-8 bar vacuum or under argon atmosphere in the temperature range from 1273 K to 1673 K (1000 °C to 1400 °C). It is shown that the reduction of oxide skin on molten aluminum is slow under normal pressures even with ultralow oxygen potential, but it is enhanced in high vacuum. To describe the wetting behavior of the Al-Al2O3 system at lower temperatures, a semiempirical calculation was employed. The calculated contact angle at 973 K (700 °C) is approximately 97 deg, which indicates that aluminum does not wet alumina at aluminum casting temperatures. Thus, a priming height is required for aluminum to infiltrate a filter. Wetting in the Al-Al2O3 system increases with temperature.

  5. Acetic acid mediated interactions between alumina surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Sato, Kimiyasu, E-mail: sato.kimiyasu@aist.go.jp [National Institute of Advanced Industrial Science and Technology (AIST), Anagahora 2266-98, Shimoshidami, Moriyama-ku, Nagoya 463-8560 (Japan); Y Latin-Small-Letter-Dotless-I lmaz, Hueseyin [National Institute of Advanced Industrial Science and Technology (AIST), Anagahora 2266-98, Shimoshidami, Moriyama-ku, Nagoya 463-8560 (Japan); Gebze Institute of Technology, Materials Science and Engineering Department, 41400, Gebze-Kocaeli (Turkey); Ijuin, Atsuko; Hotta, Yuji; Watari, Koji [National Institute of Advanced Industrial Science and Technology (AIST), Anagahora 2266-98, Shimoshidami, Moriyama-ku, Nagoya 463-8560 (Japan)

    2012-02-01

    Low-molecular-weight organic acids have been known to modify colloidal stability of alumina-based suspensions. We investigated interaction forces between alumina surfaces mediated by acetic acid which is one of the simplest organic acids. Forces between alumina surfaces were measured using the colloid-probe method of atomic force microscope (AFM). Repulsive forces attributed to steric repulsion due to adsorbed molecules and electrostatic repulsion dominated the interaction. Results of rheological characterization of the alumina slurry containing acetic acid supported the finding.

  6. Structural Effects of Lanthanide Dopants on Alumina

    Science.gov (United States)

    Patel, Ketan; Blair, Victoria; Douglas, Justin; Dai, Qilin; Liu, Yaohua; Ren, Shenqiang; Brennan, Raymond

    2017-01-01

    Lanthanide (Ln3+) doping in alumina has shown great promise for stabilizing and promoting desirable phase formation to achieve optimized physical and chemical properties. However, doping alumina with Ln elements is generally accompanied by formation of new phases (i.e. LnAlO3, Ln2O3), and therefore inclusion of Ln-doping mechanisms for phase stabilization of the alumina lattice is indispensable. In this study, Ln-doping (400 ppm) of the alumina lattice crucially delays the onset of phase transformation and enables phase population control, which is achieved without the formation of new phases. The delay in phase transition (θ → α), and alteration of powder morphology, particle dimensions, and composition ratios between α- and θ-alumina phases are studied using a combination of solid state nuclear magnetic resonance, electron microscopy, digital scanning calorimetry, and high resolution X-ray diffraction with refinement fitting. Loading alumina with a sparse concentration of Ln-dopants suggests that the dopants reside in the vacant octahedral locations within the alumina lattice, where complete conversion into the thermodynamically stable α-domain is shown in dysprosium (Dy)- and lutetium (Lu)-doped alumina. This study opens up the potential to control the structure and phase composition of Ln-doped alumina for emerging applications.

  7. Structural Effects of Lanthanide Dopants on Alumina

    Energy Technology Data Exchange (ETDEWEB)

    Patel, Ketan; Blair, Victoria; Douglas, Justin; Dai, Qilin; Liu, Yaohua; Ren, Shenqiang; Brennan, Raymond

    2017-01-06

    Lanthanide (Ln3+) doping in alumina has shown great promise for stabilizing and promoting desirable phase formation to achieve optimized physical and chemical properties. However, doping alumina with Ln elements is generally accompanied by formation of new phases (i.e. LnAlO3, Ln2O3), and therefore inclusion of Ln-doping mechanisms for phase stabilization of the alumina lattice is indispensable. In this study, Ln-doping (400 ppm) of the alumina lattice crucially delays the onset of phase transformation and enables phase population control, which is achieved without the formation of new phases. The delay in phase transition (θ → α), and alteration of powder morphology, particle dimensions, and composition ratios between α- and θ-alumina phases are studied using a combination of solid state nuclear magnetic resonance, electron microscopy, digital scanning calorimetry, and high resolution X-ray diffraction with refinement fitting. Loading alumina with a sparse concentration of Ln-dopants suggests that the dopants reside in the vacant octahedral locations within the alumina lattice, where complete conversion into the thermodynamically stable α-domain is shown in dysprosium (Dy)- and lutetium (Lu)-doped alumina. This study opens up the potential to control the structure and phase composition of Ln-doped alumina for emerging applications.

  8. Extremal Overall Elastic Response of Polycrystalline Materials

    DEFF Research Database (Denmark)

    Bendsøe, Martin P; Lipton, Robert

    1996-01-01

    Polycrystalline materials comprised of grains obtained froma single anisotropic material are considered in the frameworkof linear elasticity. No assumptions on the symmetry of thepolycrystal are made. We subject the material to independentexternal strain and stress fields with prescribed mean...

  9. Severe wear behaviour of alumina balls sliding against diamond ceramic coatings

    Indian Academy of Sciences (India)

    ANURADHA JANA; NANDADULAL DANDAPAT; MITUN DAS; VAMSI KRISHNA BALLA; SHIRSHENDU CHAKRABORTY; RAJNARAYAN SAHA; AWADESH KUMAR MALLIK

    2016-04-01

    At present alumina is themost widely used bio-ceramic material for implants.However, diamond surface offers very good solid lubricant for different machinery, equipment including biomedical implants (hip implants, knee implants, etc.), since the coefficient of friction (COF) of diamond is lower than alumina. In this tribological study, alumina ball was chosen as the counter body material to show better performance of the polycrystalline diamond (PCD) coatings in biomedical load-bearing applications.Wear and friction data were recorded for microwave plasma chemical vapour deposition (MWCVD) grown PCD coatings of four different types, out of which two sampleswere as-deposited coatings, one was chemo-mechanically polished and the other diamond sample was made free standing by wet-chemical etching of the silicon wafer. The coefficient of friction of the MWCVD grown PCD against Al$_2$O$_3$ ball under dry ambient condition was found in the range of 0.29–0.7, but in the presence of simulated body fluid, the COF reduces significantly, in the range of 0.03–0.36. The samples were then characterized by Raman spectroscopy for their quality, by coherence scanning profilometer for surface roughness and by electron microscopy for their microstructural properties. Alumina balls worn out ($14.2 \\times 10^{−1}$ mm$^3$) very rapidly with zero wear for diamond ceramic coatings. Since the generation of wear particle is the main problem for load-bearing prosthetic joints, it was concluded that the PCD material can potentially replace existing alumina bio-ceramic for their bettertribological properties.

  10. Influence of Alumina Addition on the Optical Property of Zirconia/Alumina Composite Dental Ceramics

    Institute of Scientific and Technical Information of China (English)

    JIANG Li; LIAO Yunmao; LI Wei; WAN Qianbing; ZHAO Yongqi

    2011-01-01

    The influence of various alumina additions on the optical property of zirconia/alumina composite ceramics was investigated.The relative sintered densities,transmittances,color and the microstructure of the composite ceramics were studied.The experimental results showed that the relative sintered densities and transmittances decreased with alumina addition.The lightness increased obviously but the chroma change was small.Pure zirconia nanopowders sintered densely could obtain the relatively high transmittance,while the transmittance and the lightness of slight addition changed significantly.The zirconia/alumina composite ceramics with alumina addition less than 7.5wt% could achieve the relatively stable and reliable optical properties.

  11. Preparation and thermal stability of porous alumina membranes with nano-pore arrays

    Science.gov (United States)

    Wang, Xue Hua; Li, Cheng Yong; Chen, Gui; He, Lei; Cao, Hong

    2010-03-01

    Porous alumina membranes (PAMs) were fabricated using a two-step oxidization method in oxalic acid. Polycrystalline PAMs have been prepared after annealing at different temperatures. The high-temperature properties of the PAMs were investigated using scanning electron microscopy, thermal analysis, X-ray diffraction and infrared spectrometer. At 870°C the amorphous alumina crystallizes to γ-Al2O3. Finally at 1228°C the alumina converts into the thermodynamically preferred phase, α-Al2O3. Differential thermal analysis showed that there was a gradual weight loss at about 900°C due to decomposed of oxalate. A mass of carboxylate ions and carboxylic groups were found in the infrared spectrum of PAMs, and reduced with the increasing of annealing temperature. Characteristic analysis with scanning electron microscopy shows that the pore structure of the PAMs was very stable and there was no detectable structural modification below 900°C, and microstructures of the pores changed slightly during the transformation from α-Al2O3 to γ-Al2O3 while increasing the annealing temperature.

  12. Sheet resistance of alumina ceramic after high energy implantation of tantalum ions

    Energy Technology Data Exchange (ETDEWEB)

    Savkin, Konstantin P., E-mail: savkinkp@mail2000.ru [Institute of High Current Electronics SB RAS, 2/3 Akademichesky Avenue, 634055 Tomsk (Russian Federation); Bugaev, Alexey S., E-mail: bugaev@opee.hcei.tsc.ru [Institute of High Current Electronics SB RAS, 2/3 Akademichesky Avenue, 634055 Tomsk (Russian Federation); Nikolaev, Alexey G., E-mail: nik@opee.hcei.tsc.ru [Institute of High Current Electronics SB RAS, 2/3 Akademichesky Avenue, 634055 Tomsk (Russian Federation); Oks, Efim M., E-mail: oks@opee.hcei.tsc.ru [Institute of High Current Electronics SB RAS, 2/3 Akademichesky Avenue, 634055 Tomsk (Russian Federation); Shandrikov, Maxim V., E-mail: shandrikov@opee.hcei.tsc.ru [Institute of High Current Electronics SB RAS, 2/3 Akademichesky Avenue, 634055 Tomsk (Russian Federation); Yushkov, Georgy Yu., E-mail: gyushkov@mail.ru [Institute of High Current Electronics SB RAS, 2/3 Akademichesky Avenue, 634055 Tomsk (Russian Federation); Tyunkov, Andrey V., E-mail: tyunkov@opee.hcei.tsc.ru [Tomsk State University of Control Systems and Radioelectronics, 40 Lenin Avenue, 634050 Tomsk (Russian Federation); Savruk, Elena V., E-mail: savruk@mail.ru [Tomsk State University of Control Systems and Radioelectronics, 40 Lenin Avenue, 634050 Tomsk (Russian Federation)

    2014-08-15

    Highlights: • Tantalum ions with the average energy about 145 keV were implanted in the surfaces of flat polycrystalline alumina samples. • The sheet resistance of implanted ceramic reduced after implantation with increasing of the implanted dose. • Normalized surface conductivity of treated alumina ceramic reduced only on 1% during 200 days after finishing the implantation process. • Creation of weak conducting layer on the surface of the ceramic insulator electric field strength of the flashover increases more than 25%. - Abstract: The results of investigation of the sheet resistance of alumina ceramic as a function of the fluence of implanted metal ions are presented. Tantalum ions with the average energy about 145 keV were used in experiments. Estimation of the sheet resistance was performed from analysis of volt–ampere characteristics by measuring the leakage current at a voltage between 100 V and several kilovolts, which was applied at a small area of the implanted surface. Energy dispersive X-ray analysis was used to determine composition of elements in the surface of the implanted ceramics. As a practical application of research results, it was shown that, after the creation of a weak conducting layer on the surface of the ceramic insulator, the electric field strength of the flashover increases by more than 25%.

  13. 高Nb-TiAl合金凝胶注模成形的制备研究%Preparation of high Nb-TiAl alloy by gelcasting method

    Institute of Scientific and Technical Information of China (English)

    林涛; 刘小婷; 邵慧萍; 王志

    2013-01-01

    以球形的预合金粉末 Ti-45Al-8.5Nb-0.2B-0.2W-0.1Y和元素混合粉 Ti+45%Al+10%Nb(%,原子分数)作为原料,研究了凝胶注模成形和氩气烧结制备高Nb-TiAl 合金的工艺。研究结果表明球形的预合金粉悬浮液浆料流变性良好,其悬浮液固相含量最高达70%(体积分数),经过凝胶注模体系成形干燥后的坯体在1480℃氩气气氛下烧结2h 后,烧结体相对密度达到99.1%,而元素混合粉的固相含量只有50%(体积分数),烧结体的相对密度为85.5%。通过X射线衍射分析和扫描电镜观察表明,以预合金粉为原料得到的样品主要成分是γ-TiAl 和β-Ti2 Al,以元素粉为原料得到的样品主要成分是γ-TiAl,并含有少量的α和β相,其组织是近片层。高 Nb-TiAl 合金的预合金粉末经凝胶注模成形和烧结后,可获得组织均匀的高致密度合金,其抗压强度为1715MPa,相对压缩率为1.85%。%High Nb-TiAl alloys were prepared by gelcasting method and sintering in argon atmosphere from Ti-45Al-8.5Nb-0.2B-0.2W-0.1Y spherical prealloyed powder and mixed element powders Ti+45%Al+10%Nb (at%).The results show that the slurry of spherical prealloyed powder has better rheological properties,and the solid loading of former slurry was up to 70 vol%.The dried bodies using the non-aqueous system gelcasting were sintered at 1480℃ for 2 hours in argon atmosphere.The relative density of sample with solid loading at 70 vol% from prealloyed powder reaches to 99.1%,much higher than relative density 85.5% of the mixed element powder (solid loading at 50 vol%).The microstructure of the sintered high Nb containing TiAl was analyzed by using electronic microscopy (SEM)and X-ray diffraction (XRD).The results show the sample from prealloyed power consists mainly ofγ-TiAl andβ-Ti2 Al;the element power was mainly composed ofγ-TiAl and a small a-mount ofαandβwith fine lamellar microstructure.After the prealloyed powders were gelcasting and sintered at 1480

  14. 注凝成型制备莫来石-钛酸铝复相陶瓷%PREPARATION OF MULLITE-ALUMINIUM TITANATE CERAMIC COMPOSITES VIA GELCASTING

    Institute of Scientific and Technical Information of China (English)

    陆洪彬; 陈建华; 冯春霞; 焦宝祥; 孟祥康

    2009-01-01

    The mullite-aluminium titanate (MAT) ceramic composites were prepared via the gelcasting or dry pressing processes us- ing industrial mullite and aluminium titanate (Al2TiO5) powders with different mass ratios, that titanate was synthesized by doping the bi-component additive of 10% (in mole, the same below) MgO and 15% SiO2 relative to Al2O3. Effects of the bi-component additive on the phase composition and thermal stabilization of aluminium titanate powder were analyzed by X-ray diffraction and the micro- structures of MAT ceramic composites were characterized by scanning electron microscopy. The effects of aluminium titanate content on the bending strength and average thermal expansion coefficient (room temperature-1000 ℃) of the MAT ceramic composites pre- pared by dry pressing or gelcasting shaping processes were also investigated. The results show that the bi-component additive of MgO and SiO2 can promote the formation of Al2TiO5 and enhance its thermal stabilization. The MAT ceramic composites prepared by gel- casting process obtain more homogenous structure and higher bending strength than that prepared by dry pressing process. The MAT ceramic composite prepared by gelcasting process and containing 10% (mass fraction) Al2TiO5 has the maximum bending strength of 110.05 MPa.%引入10%(摩尔分数,相对于A12O3,下同)MgO和15%SiO2双组分添加剂合成了钛酸铝粉体.采用不同质量比的钛酸铝粉体和工业莫来石,用干压和注凝成型工艺制备了莫来石-钛酸铝(mullite-aluminium titanate,MAT)复相陶瓷.用X射线衍射分析了双组分添加剂对钛酸铝相组成和热稳定性的影响.通过扫描电镜表征了MAT复相陶瓷的微结构.研究了钛酸铝含量对采用于压、注凝2种成型工艺制备的MAT复相陶瓷的弯曲强度和平均热膨胀系数(室温~1 000℃)的影响.结果表明:MgO和SiO2双组分添加剂促进了钛酸铝的形成,增强了钛酸铝的热稳定性.通过注凝成型制备

  15. ISOTROPIC TEXTURING OF POLYCRYSTALLINE SILICON WAFERS

    Institute of Scientific and Technical Information of China (English)

    L. Wang; H. Shen; Y.F. Hu

    2005-01-01

    An isotropic etching technique of texturing silicon solar cells has been applied to polycrystalline silicon wafers with different acid concentrations. Optimal etching conditions have been determined by etching rate calculation, scanning electron microscope (SEM) image and reflectance measurement. The surface morphology of the textured wafers varies in accordance with the different etchant concentration which in turn leads to the dissimilarity of etching speed. Textured polycrystalline silicon wafer surfaces display randomly located etched pits which can reduce the surface reflection and enhance the light absorption. The special relationship between reflectivity and etching rate was studied. Reflectance measurements show that isotropic texturing is one of the suitable techniques for texturing polycrystalline silicon wafers and benefits solar cells performances.

  16. Scaling properties of polycrystalline graphene: a review

    Science.gov (United States)

    Isacsson, Andreas; Cummings, Aron W.; Colombo, Luciano; Colombo, Luigi; Kinaret, Jari M.; Roche, Stephan

    2017-03-01

    We present an overview of the electrical, mechanical, and thermal properties of polycrystalline graphene. Most global properties of this material, such as the charge mobility, thermal conductivity, or Young’s modulus, are sensitive to its microstructure, for instance the grain size and the presence of line or point defects. Both the local and global features of polycrystalline graphene have been investigated by a variety of simulations and experimental measurements. In this review, we summarize the properties of polycrystalline graphene, and by establishing a perspective on how the microstructure impacts its large-scale physical properties, we aim to provide guidance for further optimization and improvement of applications based on this material, such as flexible and wearable electronics, and high-frequency or spintronic devices.

  17. Obtenção e caracterização de espumas de cimento de fosfato de cálcio: avaliação dos métodos de emulsão e gelcasting Fabrication and characterization of calcium phosphate cement foams: evaluation of emulsion and gelcasting methods

    Directory of Open Access Journals (Sweden)

    E. de Sousa

    2012-12-01

    Full Text Available Em Engenharia Tecidual, a fabricação de scaffolds capazes de guiar o crescimento, a organização e a diferenciação de células no processo de formação de novos tecidos apresenta grande relevância. Várias são as técnicas de processamento para a fabricação desta classe de material: réplica de esponjas poliméricas, incorporação de material orgânico ao pó cerâmico, gelcasting, emulsão, entre outras. Na fabricação de scaffolds focados na terapia de tecidos ósseos, os cimentos de fosfato de cálcio (CFC apresentam grande destaque, pois além de reabsorvíveis, apresentam morfologia e composição química semelhante à fase mineral óssea. Este trabalho tem como objetivo a obtenção de espumas de CFC por meio de duas rotas de processamento, emulsão e gelcasting. As espumas foram caracterizadas quanto suas propriedades físicas e mecânicas e as fases cristalinas formadas após a cura do cimento foram determinadas por difração de raios X. As amostras obtidas por ambos os métodos apresentaram porosidade entre 58-62% e microestrutura constituída de poros aproximadamente esféricos (d50=50-100 µm. A resistência mecânica das amostras variou entre 5,5-1,5 MPa. As fases cristalinas encontradas foram monetita (CaHPO4 e brushita (CaHPO4 2H2O.In Tissue Engineering, the need for scaffolds which are capable of guiding the organization, differentiation and growth of cells leading to the formation of new tissues is highly relevant. For the development of new scaffolds focused on bone tissue therapy, calcium phosphate cements (CPC have great potential, because besides their resorbability, they present morphology and chemical composition similar to the bone mineral phase. Moreover, there are several processing techniques to produce ceramic scaffolds: polymeric sponge replication, incorporation of organic material into the ceramic powder, gelcasting, emulsion, among others. The aim of this work was to obtain CPCs foams by using two

  18. Alumina forming iron base superalloy

    Energy Technology Data Exchange (ETDEWEB)

    Yamamoto, Yukinori; Muralidharan, Govindarajan; Brady, Michael P.

    2014-08-26

    An austenitic stainless steel alloy, consists essentially of, in weight percent 2.5 to 4 Al; 25 to 35 Ni; 12 to 19 Cr; at least 1, up to 4 total of at least one element selected from the group consisting of Nb and Ta; 0.5 to 3 Ti; less than 0.5 V; 0.1 to 1 of at least on element selected from the group consisting of Zr and Hf; 0.03 to 0.2 C; 0.005 to 0.1 B; and base Fe. The weight percent Fe is greater than the weight percent Ni. The alloy forms an external continuous scale including alumina, and contains coherent precipitates of .gamma.'-Ni.sub.3Al, and a stable essentially single phase FCC austenitic matrix microstructure. The austenitic matrix is essentially delta-ferrite-free and essentially BCC-phase-free.

  19. Dissolution Kinetics of Alumina Calcine

    Energy Technology Data Exchange (ETDEWEB)

    Batcheller, Thomas Aquinas

    2001-09-01

    Dissolution kinetics of alumina type non-radioactive calcine was investigated as part of ongoing research that addresses permanent disposal of Idaho High Level Waste (HLW). Calcine waste was produced from the processing of nuclear fuel at the Idaho Nuclear Technology and Engineering Center (INTEC). Acidic radioactive raffinates were solidified at ~500°C in a fluidized bed reactor to form the dry granular calcine material. Several Waste Management alternatives for the calcine are presented in the Idaho High Level Waste Draft EIS. The Separations Alternative addresses the processing of the calcine so that the HLW is ready for removal to a national geological repository by the year 2035. Calcine dissolution is the key front-end unit operation for the separations alternative.

  20. Espumas vítreas do sistema Li2O-ZrO2-SiO2-Al2O 3 produzidas pelo processo gelcasting Li2O-ZrO2-SiO2 -Al2O3 glass-ceramic foams produced by the gelcasting process

    Directory of Open Access Journals (Sweden)

    E. de Sousa

    2009-06-01

    Full Text Available Espumas vítreas do sistema Li2O-ZrO2-SiO2-Al2O 3 (LZSA foram produzidas pelo processo gelcasting, associado à aeração de suspensões cerâmicas, sem controle atmosférico. Por meio da adição de diferentes concentrações de agente espumante (Fongraminox foi possível obter espumas vítreas com densidade relativa variando entre uma estreita faixa (0,10-0,15. As espumas vítreas apresentaram resistência à compressão de 2,5-3,7 MPa, que correspondem a porosidade entre 85 e 89% e macroestrutra com poros aproximadamente esféricos e interconectados. Tais características tornam esses materiais atraentes para as seguintes aplicações tecnológicas: filtros para metais fundidos e gases quentes e, suportes catalíticos.Vitreous foams in the Li2O-ZrO2-SiO2-Al2O 3 (LZSA system were produced by the gelcasting process with aeration of ceramic suspensions and without atmospheric control. By the addition of different concentrations of foaming agent (Fongraminox it was possible to attain glass-ceramic foams in a narrow range of relative density (0.10-0.15. The glass-ceramic foams showed compressive strength of 2.5-3.7 MPa, which corresponds to porosity between 85-89%, and macrostructure with pores nearly spherical and interconnected, these characteristics make these materials attractive for the following applications technology: filters of molten metals and hot gas, and catalytic support.

  1. Recent Development of High Alumina Refractories in China

    Institute of Scientific and Technical Information of China (English)

    WANGJin-xiang; LIUJie-hua

    1994-01-01

    The paper reviews the achievements which have been attained recently in China in high alumina refractories raw materials and their products,including 1) homogenization ,urification and electric fusion of high alumina raw materials and synthesizing of spinel from natural raw materials;2) processing principle and characteristics and microstructural features of creep-resistance high alu-mina brick ,alumina-magnesia-carbon brick and thermal shock resistanced high alumina brikc and their application in practice.

  2. Fracture toughness of advanced alumina ceramics and alumina matrix composites used for cutting tool edges

    Directory of Open Access Journals (Sweden)

    M. Szutkowska

    2012-10-01

    Full Text Available Purpose: Specific characteristics in fracture toughness measurements of advanced alumina ceramics and alumina matrix composites with particular reference to α-Al2O3, Al2O3-ZrO2, Al2O3-ZrO2-TiC and Al2O3-Ti(C,N has been presented.Design/methodology/approach: The present study reports fracture toughness obtained by means of the conventional method and direct measurements of the Vickers crack length (DCM method of selected tool ceramics based on alumina: pure alumina, alumina-zirconia composite with unstabilized and stabilized zirconia, alumina–zirconia composite with addition of TiC and alumina–nitride-carbide titanium composite with 2wt% of zirconia. Specimens were prepared from submicro-scale trade powders. Vicker’s hardness (HV1, fracture toughness (KIC at room temperature, the indentation fracture toughness, Young’s modulus and apparent density were also evaluated. The microstructure was observed by means of scanning electron microscopy (SEM.Findings: The lowest value of KIC is revealed by pure alumina ceramics. The addition of (10 wt% unstabilized zirconia to alumina or a small amount (5 wt% of TiC to alumina–zirconia composite improve fracture toughness of these ceramics in comparison to alumina ceramics. Alumina ceramics and alumina-zirconia ceramics reveal the pronounced character of R-curve because of an increasing dependence on crack growth resistance with crack extension as opposed to the titanium carbide-nitride reinforced composite based on alumina. R-curve has not been observed for this composite.Practical implications: The results show the method of fracture toughness improvement of alumina tool ceramics.Originality/value: Taking into account the values of fracture toughness a rational use of existing ceramic tools should be expected.

  3. A broad chemical and structural characterization of the damaged region of carbon implanted alumina

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez, M. [CIEMAT. FNL (edificio 2), Avda. Complutense, 22, 28040 Madrid (Spain)], E-mail: maria.gonzalez@ciemat.es; Roman, R.; Maffiotte, C. [CIEMAT. FNL (edificio 2), Avda. Complutense, 22, 28040 Madrid (Spain); Gonzalez-Casablanca, J. [CAI-URJC, c/Tulipan s/n, 28933 Mostoles (Spain); Perez, R. [PNT-PCB, Edifici Modular, C/Baldiri Reixac 10, 08028 Barcelona (Spain); Hole, D. [Ion Implantation Laboratory, Pevensey 2 Bdlg., University of Sussex, Brighton BN1 9QH (United Kingdom)

    2009-05-01

    As candidate materials for future thermonuclear fusion reactors, isolating ceramics will be submitted to high energy gamma and neutron radiation fluxes together with an intense particle flux. Amorphization cannot be tolerated in ceramics for fusion applications, due to the associated volume change and the deterioration of mechanical properties. Therefore, a comprehensive study was carried out to examine the effects of carbon beam irradiation on polycrystalline aluminium oxide (Al{sub 2}O{sub 3}), a ceramic component of some diagnostic and plasma heating systems. Complementary techniques have allowed a complete chemical and structural surface analysis of the implanted alumina. Implantation with 75 keV, mono-energetic carbon ions at doses of 1 x 10{sup 17} and 5 x 10{sup 17} ions/cm{sup 2} was performed on polished and thermally treated ceramic discs. The alumina targets were kept below 120 deg. C. The structural modifications induced during ion irradiation were studied by the GXRD and TEM techniques. Under these conditions, alumina is readily amorphized by carbon ions, the thickness of the ion-beam induced disordered area increasing with the ion dose. Matrix elements and ion implanted profiles were followed as a function of depth by using ToF-SIMS, indicating the maximum concentration of implanted ions to be in the deeper half of the amorphous region. Ion distribution and chemical modifications caused in the Al{sub 2}O{sub 3} substrate by carbon irradiation were corroborated with XPS. The amount of oxygen in the vicinity of the implanted alumina surface was reduced, suggesting that this element was selectively sputtered during carbon irradiation. The intensity of those peaks referring to Al-O bonds diminishes, while contributions of reduced aluminium and metal carbides are found at the maximum of the carbon distribution. TEM observations on low temperature thermally annealed specimens indicate partial recovery of the initial crystalline structure.

  4. Burned Microporous Alumina-Graphite Brick

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    @@ 1 Scope This standard specifies the definition,classifica-tion,technical requirements,test methods,inspection rules,marking,packing,transportation and quality certificate of burned microporous alumina-graphite brick.

  5. Alumina Carbon Refractory Products for Continuous Casting

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    @@ 1 Scope This standard specifies the classification.techni-cal requirements,test methods,inspection rules,packing,marking,transportation,storage and quality certificate of alumina carbon refractory products for continuous casting.

  6. Stochastic Multiscale Modeling of Polycrystalline Materials

    Science.gov (United States)

    2013-01-01

    Thrun, and K. Ober- mayer , editors, Advances in Neural Information Processing Systems 15, pages 705–712, Cambridge, MA, 2003. MIT Press. [19] E Van der...modeling of polycrystalline IN 100. International Journal of Plasticity, 24(10):1694–1730, 2008. Special Issue in Honor of Jean - Louis Chaboche. [111] V. B

  7. Extremal Overall Elastic Response of Polycrystalline Materials

    DEFF Research Database (Denmark)

    Bendsøe, Martin P; Lipton, Robert

    1997-01-01

    Polycrystalline materials comprised of grains obtained from a single anisotropic material are considered in the framework of linear elasticity. No assumptions on the symmetry of the polycrystal are made. We subject the material to independent external strain and stress fields with prescribed mean...

  8. PREPARATION AND CHARACTERIZATION OF POLY-CRYSTALLINE SILICON THIN FILM

    Institute of Scientific and Technical Information of China (English)

    Y.F. Hu; H. Shen; Z.Y. Liu; L.S. Wen

    2003-01-01

    Poly-crystalline silicon thin film has big potential of reducing the cost of solar cells.In this paper the preparation of thin film is introduced, and then the morphology of poly-crystalline thin film is discussed. On the film we developed poly-crystalline silicon thin film solar cells with efficiency up to 6. 05% without anti-reflection coating.

  9. Stochastic multiscale modeling of polycrystalline materials

    Science.gov (United States)

    Wen, Bin

    Mechanical properties of engineering materials are sensitive to the underlying random microstructure. Quantification of mechanical property variability induced by microstructure variation is essential for the prediction of extreme properties and microstructure-sensitive design of materials. Recent advances in high throughput characterization of polycrystalline microstructures have resulted in huge data sets of microstructural descriptors and image snapshots. To utilize these large scale experimental data for computing the resulting variability of macroscopic properties, appropriate mathematical representation of microstructures is needed. By exploring the space containing all admissible microstructures that are statistically similar to the available data, one can estimate the distribution/envelope of possible properties by employing efficient stochastic simulation methodologies along with robust physics-based deterministic simulators. The focus of this thesis is on the construction of low-dimensional representations of random microstructures and the development of efficient physics-based simulators for polycrystalline materials. By adopting appropriate stochastic methods, such as Monte Carlo and Adaptive Sparse Grid Collocation methods, the variability of microstructure-sensitive properties of polycrystalline materials is investigated. The primary outcomes of this thesis include: (1) Development of data-driven reduced-order representations of microstructure variations to construct the admissible space of random polycrystalline microstructures. (2) Development of accurate and efficient physics-based simulators for the estimation of material properties based on mesoscale microstructures. (3) Investigating property variability of polycrystalline materials using efficient stochastic simulation methods in combination with the above two developments. The uncertainty quantification framework developed in this work integrates information science and materials science, and

  10. Research on Gelcasting Formation of SiC-Al2O3-Y2O3-La2O3 Systems

    Institute of Scientific and Technical Information of China (English)

    郭文利; 徐廷献; 靳正国

    2003-01-01

    The rheological behavior and gelcasting of composite suspensions of SiC and synthesized Al2O3-Y2O3-La2O3 powder as sintering aid were investigated. It was found that the rheological behavior of SiC particles could be modified with a slightly oxidized surface that was similar to silica in colloidal behavior. The smaller the particles were, the more similar to silica the SiC powder was. The pH value of Al2O3-Y2O3-La2O3 synthesized powder slurry at isoelectric points (IEP) is higher than that of SiC powder. The dispersant PAA-NH4 changes the IEP of both SiC and Al2O3-Y2O3-La2O3 powder slurry to higher pH values. The experimental results indicate that the composite suspension could possess satisfactory stability and lower viscosity at pH =10.1 and PAA-NH4 as dispersant. The optimum solid loading was 5500 in volume. Machinable green bodies with uniform complex shape are gained after molding.

  11. Application of NMR spectroscopy and multidimensional imaging to the gelcasting process and in-situ real-time monitoring of cross-linking polyacrylamide gels

    Energy Technology Data Exchange (ETDEWEB)

    Ahuja, S.; Dieckman, S.L.; Gopalsami, N. [and others

    1995-04-01

    In the gelcasting process, a slurry of ceramic powder in a solution of organic monomers is cast in a mold. The process is different from injection molding in that it separates mold-filling from setting during conversion of the ceramic slurry to a formed green part. In this work, NMR spectroscopy and imaging have been conducted for in-situ monitoring of the gelation process and for mapping the polymerization. {sup 1}H nuclear magnetic resonance spectra have been obtained during polymerization of a premix of soluble reactive methacrylamide (monomer) and N, N`-methylene bisacrylamide (cross-linking molecules). The premix was polymerized by adding ammonium persulfate (initiator) and tetramethyl-ethylene-diamine (accelerator) to form long-chain, cross-linked polymers. The time-varying spin-lattice relaxation times T{sub 1} during polymerization have been studied at 25 and 35{degrees}C, and the variation of spectra and T{sub 1} with respect to extent of polymerization has been determined. To verify homogeneous polymerization, multidimensional NMR imaging was utilized for in-situ monitoring of the process. The intensities from the images are modeled and the correspondence shows a direct extraction of T{sub 1} data from the images.

  12. Direct foaming porous alumina ceramics

    Energy Technology Data Exchange (ETDEWEB)

    Salvini, V.R.; Sandurkov, B.A.; Klein-Gunnewiek, R.F.; Pandolfelli, V.C. [Federal Univ. of Sao Carlos, Materials Engineering Dept., FIRE Associate Lab., Sao Carlos, SP (Brazil)

    2007-07-01

    This paper presents the work carried out in order to improve the properties of these porous alumina ceramics, concerning their application as thermal insulating. Changes in solid content of ceramic suspension, variations of pore forming agents and other additives were carried out and their effects on the green and the sintered mechanical strength are also shown. According to the literature, several starch types seem to be attractive pore forming agents as well as binders for porous ceramics. Most of them consist of a mixture of two polysaccharide types, amylose (linear) and amylopectin (highly branched). Corn, potato and rice starches were used in the present study because of their difference in size and shape. In order to increase the mechanical strength of the sintered porous ceramics a part of the Al{sub 2}O{sub 3} in the composition was replaced by Al(OH){sub 3}. Due to the changes of the composition and additives, porosities up to 81% and a mechanical strength of 15 MPa were obtained. (orig.)

  13. Equilibrium shapes of polycrystalline silicon nanodots

    Energy Technology Data Exchange (ETDEWEB)

    Korzec, M. D., E-mail: korzec@math.tu-berlin.de; Wagner, B., E-mail: bwagner@math.tu-berlin.de [Department of Mathematics, Technische Universität Berlin, Straße des 17. Juni 136, 10623 Berlin (Germany); Roczen, M., E-mail: maurizio.roczen@physik.hu-berlin.de [Department of Physics, Humboldt-Universität zu Berlin, Newtonstraße 15, 12489 Berlin (Germany); Schade, M., E-mail: martin.schade@physik.uni-halle.de [Zentrum für Innovationskompetenz SiLi-nano, Martin-Luther-Universität Halle-Wittenberg, Karl-Freiherr-von-Fritsch-Straße 3, 06120 Halle (Germany); Rech, B., E-mail: bernd.rech@helmholtz-berlin.de [Helmholtz-Zentrum Berlin, Institute for Silicon Photovoltaics, Kekuléstraße 5, 12489 Berlin (Germany)

    2014-02-21

    This study is concerned with the topography of nanostructures consisting of arrays of polycrystalline nanodots. Guided by transmission electron microscopy (TEM) measurements of crystalline Si (c-Si) nanodots that evolved from a “dewetting” process of an amorphous Si (a-Si) layer from a SiO{sub 2} coated substrate, we investigate appropriate formulations for the surface energy density and transitions of energy density states at grain boundaries. We introduce a new numerical minimization formulation that allows to account for adhesion energy from an underlying substrate. We demonstrate our approach first for the free standing case, where the solutions can be compared to well-known Wulff constructions, before we treat the general case for interfacial energy settings that support “partial wetting” and grain boundaries for the polycrystalline case. We then use our method to predict the morphologies of silicon nanodots.

  14. Polycrystalline thin films FY 1992 project report

    Energy Technology Data Exchange (ETDEWEB)

    Zweibel, K. [ed.

    1993-01-01

    This report summarizes the activities and results of the Polycrystalline Thin Film Project during FY 1992. The purpose of the DOE/NREL PV (photovoltaic) Program is to facilitate the development of PV that can be used on a large enough scale to produce a significant amount of energy in the US and worldwide. The PV technologies under the Polycrystalline Thin Film project are among the most exciting ``next-generation`` options for achieving this goal. Over the last 15 years, cell-level progress has been steady, with laboratory cell efficiencies reaching levels of 15 to 16%. This progress, combined with potentially inexpensive manufacturing methods, has attracted significant commercial interest from US and international companies. The NREL/DOE program is designed to support the efforts of US companies through cost-shared subcontracts (called ``government/industry partnerships``) that we manage and fund and through collaborative technology development work among industry, universities, and our laboratory.

  15. Polycrystalline thin films FY 1992 project report

    Energy Technology Data Exchange (ETDEWEB)

    Zweibel, K. (ed.)

    1993-01-01

    This report summarizes the activities and results of the Polycrystalline Thin Film Project during FY 1992. The purpose of the DOE/NREL PV (photovoltaic) Program is to facilitate the development of PV that can be used on a large enough scale to produce a significant amount of energy in the US and worldwide. The PV technologies under the Polycrystalline Thin Film project are among the most exciting next-generation'' options for achieving this goal. Over the last 15 years, cell-level progress has been steady, with laboratory cell efficiencies reaching levels of 15 to 16%. This progress, combined with potentially inexpensive manufacturing methods, has attracted significant commercial interest from US and international companies. The NREL/DOE program is designed to support the efforts of US companies through cost-shared subcontracts (called government/industry partnerships'') that we manage and fund and through collaborative technology development work among industry, universities, and our laboratory.

  16. CHEMICAL AND ELECTRICAL CHARACTERIZATION OF POLYCRYSTALLINE SEMICONDUCTORS

    OpenAIRE

    1982-01-01

    The chemistry and composition of inter- and intragrain regions in polycrystalline semiconductors can be related to, as well as dominate, the electrical characteristics of the materials, and devices fabricated from them. In this paper, high-resolution, complementary surface analysis techniques, including Auger electron spectroscopy (AES), secondary ion mass spectroscopy (SIMS), X-ray photoelectron spectroscopy (XPS) and low-energy electron loss spectroscopy (EELS), are used to investigate the ...

  17. Conductivity size effect of polycrystalline metal nanowires

    Directory of Open Access Journals (Sweden)

    Weihuang Xue

    2016-11-01

    Full Text Available It is well known that the conductivity of metal nanowires decreases with the wire diameter. This size effect was first studied for metal thin films when the film thickness approaches the electron mean free path. Fuchs & Sondheimer (FS pointed out that the external surface scattering of the electrons contributes to the conductivity decrease. Mayadas and Shatzkes (MS pointed out that the grain boundary scattering plays a major role for polycrystalline thin films. As is clear that nanowires are 2-d constrained instead of 1-d for thin film, so the size effect would be more eminent. However, today the mostly used physical model for the conductivity of metal nanowires is still the MS theory. This paper proposes a more complete model suitable for circular cross-section polycrystalline metal nanowires, which takes into account of background scattering, external surface scattering, as well as grain boundary scattering. Comparison with experiment data showed that our model can well explain the conductivity size effect of polycrystalline metal nanowires.

  18. Characterization of electrochemically modified polycrystalline platinum surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Krebs, L.C.; Ishida, Takanobu.

    1991-12-01

    The characterization of electrochemically modified polycrystalline platinum surfaces has been accomplished through the use of four major electrochemical techniques. These were chronoamperometry, chronopotentiommetry, cyclic voltammetry, and linear sweep voltammetry. A systematic study on the under-potential deposition of several transition metals has been performed. The most interesting of these were: Ag, Cu, Cd, and Pb. It was determined, by subjecting the platinum electrode surface to a single potential scan between {minus}0.24 and +1.25 V{sub SCE} while stirring the solution, that the electrocatalytic activity would be regenerated. As a consequence of this study, a much simpler method for producing ultra high purity water from acidic permanganate has been developed. This method results in water that surpasses the water produced by pyrocatalytic distillation. It has also been seen that the wettability of polycrystalline platinum surfaces is greatly dependent on the quantity of oxide present. Oxide-free platinum is hydrophobic and gives a contact angle in the range of 55 to 62 degrees. We have also modified polycrystalline platinum surface with the electrically conducting polymer poly-{rho}-phenylene. This polymer is very stable in dilute sulfuric acid solutions, even under applied oxidative potentials. It is also highly resistant to electrochemical hydrogenation. The wettability of the polymer modified platinum surface is severely dependent on the choice of supporting electrolyte chosen for the electrochemical polymerization. Tetraethylammonium tetrafluoroborate produces a film that is as hydrophobic as Teflon, whereas tetraethylammonium perchlorate produces a film that is more hydrophilic than oxide-free platinum.

  19. Bioactive glass-ceramics coatings on alumina

    Energy Technology Data Exchange (ETDEWEB)

    Vitale Brovarone, C.; Verne, E.; Lupo, F. [Politecnico di Torino (Italy). Materials Science and Chemical Eng. Dept.; Moisescu, C. [Jena Univ. (Germany). Otto-Schott-Inst. fuer Glaschemie; Zanardi, L.; Bosetti, M.; Cannas, M. [Eastern Piemont Univ., Novara (Italy). Medical Science Dept.

    2001-07-01

    In this work, aiming to combine the mechanical performances of alumina with the surface properties of a bioactive material, we coated full density alumina substrates by a bioactive glass-ceramic GC. This latter was specially tailored, in term of costituents and specific quantity to have a thermal expansion coefficient close to that of alumina (8.5-9{sup *}10{sup -6}/ C) which is lower than most of the bioactive glasses and glass-ceramics already in use. In this way, we sought to avoid, as much as possible, the crack formation and propagation due to residual stresses generated by the thermal expansion coefficients mismatch. Furthermore, the high reactivity of alumina toward the glass-ceramic was carefully controlled to avoid deep compositional modification of the GC that will negatively affect its bioactivity. At this purpose, an intermediate layer of an appropriate glass G was coated prior to coat the bioactive glass-ceramic. On the materials obtained, preliminary biological tests have been done to evaluate glass-ceramic biocompatibility respect to alumina. (orig.)

  20. Monitoring Transport Across Modified Nanoporous Alumina Membranes

    Directory of Open Access Journals (Sweden)

    Erich D. Steinle

    2007-11-01

    Full Text Available This paper describes the use of several characterization methods to examinealumina nanotubule membranes that have been modified with specific silanes. The functionof these silanes is to alter the transport properties through the membrane by changing thelocal environment inside the alumina nanotube. The presence of alkyl groups, either long(C18 or short and branched (isopropyl hydrocarbon chains, on these silanes significantlydecreases the rate of transport of permeant molecules through membranes containingalumina nanotubes as monitored via absorbance spectroscopy. The presence of an ionicsurfactant can alter the polarity of these modified nanotubes, which correlates to anincreased transport of ions. Fluorescent spectroscopy is also utilized to enhance thesensitivity of detecting these permeant molecules. Confirmation of the alkylsilaneattachment to the alumina membrane is achieved with traditional infrared spectroscopy,which can also examine the lifetime of the modified membrane. The physical parameters ofthese silane-modified porous alumina membranes are studied via scanning electronmicroscopy. The alumina nanotubes are not physically closed off or capped by the silanesthat are attached to the alumina surfaces.

  1. High contrast laser marking of alumina

    Energy Technology Data Exchange (ETDEWEB)

    Penide, J. [Applied Physics Department, University of Vigo, EEI, Lagoas-Marcosende, 9, Vigo 36310 (Spain); Quintero, F., E-mail: fquintero@uvigo.es [Applied Physics Department, University of Vigo, EEI, Lagoas-Marcosende, 9, Vigo 36310 (Spain); Riveiro, A. [Applied Physics Department, University of Vigo, EEI, Lagoas-Marcosende, 9, Vigo 36310 (Spain); Fernández, A. [Department of Engineering Design, University of Vigo, Escuela de Ingeniería Industrial, Campus Universitario, Vigo E-36310 (Spain); Val, J. del [Applied Physics Department, University of Vigo, EEI, Lagoas-Marcosende, 9, Vigo 36310 (Spain); Comesaña, R. [Materials Engineering, Applied Mechanics and Construction Department, University of Vigo, EEI, Lagoas-Marcosende, Vigo E-36310 (Spain); Lusquiños, F.; Pou, J. [Applied Physics Department, University of Vigo, EEI, Lagoas-Marcosende, 9, Vigo 36310 (Spain)

    2015-05-01

    Highlights: • Laser marking of alumina using near infrared (NIR) lasers was experimentally analyzed. • Color change produced by NIR lasers is due to thermally induced oxygen vacancies. • Laser marking results obtained using NIR lasers and green laser are compared. • High contrast marks on alumina were achieved. - Abstract: Alumina serves as raw material for a broad range of advanced ceramic products. These elements should usually be identified by some characters or symbols printed directly on them. In this sense, laser marking is an efficient, reliable and widely implemented process in industry. However, laser marking of alumina still leads to poor results since the process is not able to produce a dark mark, yielding bad contrast. In this paper, we present an experimental study on the process of marking alumina by three different lasers working in two wavelengths: 1064 nm (Near-infrared) and 532 nm (visible, green radiation). A colorimetric analysis has been carried out in order to compare the resulting marks and its contrast. The most suitable laser operating conditions were also defined and are reported here. Moreover, the physical process of marking by NIR lasers is discussed in detail. Field Emission Scanning Electron Microscopy, High Resolution Transmission Electron Microscopy and X-ray Photoelectron Spectroscopy were also employed to analyze the results. Finally, we propose an explanation for the differences of the coloration induced under different atmospheres and laser parameters. We concluded that the atmosphere is the key parameter, being the inert one the best choice to produce the darkest marks.

  2. Photocurrent Property of GaN on the Si Photodetector with a Nearly Polycrystalline α-Al2O3 Buffer Layer

    Institute of Scientific and Technical Information of China (English)

    江若琏; 王军转; 陈鹏; 赵作明; 梅永丰; 沈波; 张荣; 吴兴龙; 郑有料

    2002-01-01

    Using nearly polycrystalline α-Al2O3 as the buffer layer, GaN epilayers were grown on Si(111) substrates by low-pressure metal-oragnic chemical vapour deposition. The nearly polycrystalline α-Al2O3 was formed by anodicporous alumina annealed at high temperature. Prototype photoconductive detectors were fabricated with thesematerials. The spectral response of these detectors exhibits a relatively sharp cut-off near the wavelength of360nm and a peak at 340nm with a shoulder near 360nm. Under 5 V bias, the responsivities at 340nm and360nm were measured to be 3.3 A/W and 2.4A/W, respectively. The relationship between the responsivity andthe bias voltage shows that the responsivity is saturated when the bias voltage reaches 5 V.

  3. Challenges and Strategies in the Synthesis of Mesoporous Alumina Powders and Hierarchical Alumina Monoliths

    Directory of Open Access Journals (Sweden)

    Anne Galarneau

    2012-02-01

    Full Text Available A new rapid, very simple and one-step sol-gel strategy for the large-scale preparation of highly porous γ-Al2O3 is presented. The resulting mesoporous alumina materials feature high surface areas (400 m2 g−1, large pore volumes (0.8 mL g−1 and the ��-Al2O3 phase is obtained at low temperature (500 °C. The main advantages and drawbacks of different preparations of mesoporous alumina materials exhibiting high specific surface areas and large pore volumes such as surfactant-nanostructured alumina, sol-gel methods and hierarchically macro-/mesoporous alumina monoliths have been analyzed and compared. The most reproducible synthesis of mesoporous alumina are given. Evaporation-Induced Self-Assembly (EISA is the sole method to lead to nanostructured mesoporous alumina by direct templating, but it is a difficult method to scale-up. Alumina featuring macro- and mesoporosity in monolithic shape is a very promising material for in flow applications; an optimized synthesis is described.

  4. Synthesis and characterization of alumina precursor and alumina to be used as nano composite; Sintese e caracterizacao de precursores de alumina e alumina para uso em nanocompositos

    Energy Technology Data Exchange (ETDEWEB)

    Antunes, M.L.P., E-mail: malu@sorocaba.unesp.b [Universidade Estadual Paulista Julio de Mesquita Filho (UNESP), Sorocaba, SP (Brazil); Santos, H. Souza [Universidade de Sao Paulo (IF/USP), SP (Brazil). Inst. de Fisica; Santos, P. Souza [Universidade de Sao Paulo (EP/USP), SP (Brazil). Escola Politecnica

    2009-07-01

    With the evolution of nanomaterials technology, mainly in the 90s, it was possible to observe produced composites with alumina matrix and nanomaterial as reinforcing materials. It results in a significant improvement of mechanical proprieties of these composites. Thenceforth the study of synthesis and characterization of nanostructured materials has attracted great scientific interest. In this perspective, the aim of this work is to present an experimental procedure to obtain nordstrandite (aluminum hydroxide) with nanometric dimensions. Nordstrandite synthesis, obtained by the reaction of slightly amalgamated aluminum foil with aqueous ethylene glycol, which allows the control of the size of crystal produced. This control could be confirmed by X-Ray Diffraction and Electron Microscopy. Thermal transformation study is also presented. This study allowed the identification of transition aluminas that have potential to produce nanometric aluminas. (author)

  5. Iron films deposited on porous alumina substrates

    Science.gov (United States)

    Yamada, Yasuhiro; Tanabe, Kenichi; Nishida, Naoki; Kobayashi, Yoshio

    2016-12-01

    Iron films were deposited on porous alumina substrates using an arc plasma gun. The pore sizes (120 - 250 nm) of the substrates were controlled by changing the temperature during the anodic oxidation of aluminum plates. Iron atoms penetrated into pores with diameters of less than 160 nm, and were stabilized by forming γ-Fe, whereas α-Fe was produced as a flat plane covering the pores. For porous alumina substrates with pore sizes larger than 200 nm, the deposited iron films contained many defects and the resulting α-Fe had smaller hyperfine magnetic fields. In addition, only a very small amount of γ-Fe was obtained. It was demonstrated that the composition and structure of an iron film can be affected by the surface morphology of the porous alumina substrate on which the film is grown.

  6. A Novel Processing Route for Ni-doped Alumina Composites

    Institute of Scientific and Technical Information of China (English)

    JING Mao-xiang; SHEN Xiang-qian; ZHOU Jian-xin; LI Dong-hong; LI Wang-xing

    2006-01-01

    Alumina-based composites containing 0-15wt% Ni metallic phase were produced by hot press-sintering Ni-coated alumina powders. The Ni-coated alumina powders were prepared by the aqueous heterogeneous precipitation of alumina micro-powders and nickel sulfate salt followed by reduction process. The microstructural features and dispersion of Ni phase in Ni-coated alumina powders and the subsequent alumina-Ni cermets were investigated using scanning electron microscope (SEM), X-ray diffractometer (XRD), and transmission electron microscope (TEM). The relative density of the hot press-sintered composites was measured with the Archimedes' method while the fracture strength and the fracture toughness were defined with the three-point bending method and the micro-indentation fracture method. In the formation of alumina-Ni cermets from sintered Ni-coated alumina powders, Ni phase to some extent limits the densification rate and stifles the coarsening and growing process of alumina grains. The Ni phase is found to be located at the interfaces and the triple-joint junctions of alumina grains which results into alteration of the fracture mode of alumina and its increased fracture strength and fracture toughness if compared with monolithic alumina.

  7. Tribological properties of nanoscale alumina-zirconia composites

    NARCIS (Netherlands)

    Kerkwijk, B.; Winnubst, A.J.A.; Verweij, H.; Mulder, E.J.; Metselaar, H.S.C.; Schipper, D.J.

    1999-01-01

    The tribological properties of zirconia (Y-TZP), alumina and their composites, alumina dispersed in zirconia (ADZ) and zirconia-toughened alumina (ZTA), were investigated. These ceramics are made by colloidal processing methods such that well-defined, homogeneous microstructures with submicron grain

  8. Nanomechanical humidity detection through porous alumina cantilevers

    Directory of Open Access Journals (Sweden)

    Olga Boytsova

    2015-06-01

    Full Text Available We present here the behavior of the resonance frequency of porous anodic alumina cantilever arrays during water vapor adsorption and emphasize their possible use in the micromechanical sensing of humidity levels at least in the range of 10–22%. The sensitivity of porous anodic aluminium oxide cantilevers (Δf/Δm and the humidity sensitivity equal about 56 Hz/pg and about 100 Hz/%, respectively. The approach presented here for the design of anodic alumina cantilever arrays by the combination of anodic oxidation and photolithography enables easy control over porosity, surface area, geometric and mechanical characteristics of the cantilever arrays for micromechanical sensing.

  9. Microwave fast sintering of submicrometer alumina

    Directory of Open Access Journals (Sweden)

    Romualdo Rodrigues Menezes

    2010-09-01

    Full Text Available Commercially available alumina powder with high-purity submicrometer particle size and narrow particle size distribution was fully densified by a microwave hybrid fast firing technique. The alumina compacts were surrounded by susceptor material, which helped the heating of the samples, and sintered in a microwave oven at a frequency of 2.45 GHz and a power level of 1.8 kW. The sintered samples reached densities of 99% in sintering cycles of 30 to 40 minutes, a much shorter time than conventional sintering processes. The sintered samples showed uniform microstructures with powder particle size/average grain size rations higher than 1:2.

  10. Study of the molybdenum retention in alumina; Estudio de la retencion de molibdeno en alumina

    Energy Technology Data Exchange (ETDEWEB)

    Wilkinson, Maria V.; Mondino, Angel V.; Manzini, Alberto [Comision Nacional de Energia Atomica, Buenos Aires (Argentina). Centro Atomico Ezeiza. Radioquimica y Quimica de las Radiaciones

    2002-07-01

    The Argentine National Atomic Energy Commission routinely produces {sup 99} Mo by fission of highly enriched uranium contained in targets irradiated in RA-3 reactor. The current process begins with the dissolution of the irradiated target in a basic media, considering the possibility of changing the targets, it could be convenient to dissolve them in acid media. The use of alumina as a first separation step in acid dissolution processes is already known although it is necessary to determine both the type of alumina to be used and the separation conditions. The study of molybdenum retention in alumina was performed at laboratory scale, using Mo-99 as radiotracer. Different kinds of alumina were tried, varying charge solution acidity. Influence of uranium concentration in the loading solution on molybdenum retention was also studied. (author)

  11. Abnormality in fracture strength of polycrystalline silicene

    Science.gov (United States)

    Liu, Ning; Hong, Jiawang; Pidaparti, Ramana; Wang, Xianqiao

    2016-09-01

    Silicene, a silicon-based homologue of graphene, arouses great interest in nano-electronic devices due to its outstanding electronic properties. However, its promising electronic applications are greatly hindered by lack of understanding in the mechanical strength of silicene. Therefore, in order to design mechanically reliable devices with silicene, it is necessary to thoroughly explore the mechanical properties of silicene. Due to current fabrication methods, graphene is commonly produced in a polycrystalline form; the same may hold for silicene. Here we perform molecular dynamics simulations to investigate the mechanical properties of polycrystalline silicene. First, an annealing process is employed to construct a more realistic modeling structure of polycrystalline silicene. Results indicate that a more stable structure is formed due to the breaking and reformation of bonds between atoms on the grain boundaries. Moreover, as the grain size decreases, the efficiency of the annealing process, which is quantified by the energy change, increases. Subsequently, biaxial tensile tests are performed on the annealed samples in order to explore the relation between grain size and mechanical properties, namely in-plane stiffness, fracture strength and fracture strain etc. Results indicate that as the grain size decreases, the fracture strain increases while the fracture strength shows an inverse trend. The decreasing fracture strength may be partly attributed to the weakening effect from the increasing area density of defects which acts as the reservoir of stress-concentrated sites on the grain boundary. The observed crack localization and propagation and fracture strength are well-explained by a defect-pileup model.

  12. Third-generation alumina-on-alumina ceramic bearings in cementless total hip arthroplasty.

    Science.gov (United States)

    Lusty, P J; Tai, C C; Sew-Hoy, R P; Walter, W L; Walter, W K; Zicat, B A

    2007-12-01

    Wear debris has been implicated in the pathogenesis of osteolysis. Alumina-on-alumina ceramic bearings have a low wear rate, which may reduce the prevalence of osteolysis. The purpose of this study was to determine the rates of wear and osteolysis associated with modern cementless hip arthroplasty with alumina-on-alumina bearings at five years. We analyzed a series of 301 third-generation alumina-on-alumina cementless primary total hip replacements in 283 patients. The average age of the patients at the time of the arthroplasty was fifty-eight years. All procedures were performed with use of the same surgical technique and the same implant at a single center. At a minimum of five years postoperatively, ten patients had died and twenty-two patients were lost to follow-up. We assessed patients clinically and radiographically, and all retrieved bearings were analyzed for wear. At the time of the latest follow-up, the mean Harris hip score was 95 points. All surviving implants had radiographic evidence of stable bone ingrowth. There were nine revisions of one or both components. Four stems were revised following periprosthetic fracture, one stem was revised because of aseptic loosening at two months, and one stem was revised to facilitate a femoral shortening osteotomy. Two cups were revised because of psoas tendinitis, and both components of one arthroplasty were revised because of impingement and osteolysis. The rate of survival of both components, with revision because of aseptic loosening or osteolysis as the end point, was 99% at seven years. The retrieved femoral heads showed an early median wear rate of 0.2 mm(3) per year. Cementless primary total hip prostheses with a third-generation alumina-on-alumina bearing showed very low wear and were associated with minimal osteolysis at the time of follow-up, at a minimum of five years.

  13. Interstellar extinction by fractal polycrystalline graphite clusters?

    CERN Document Server

    Andersen, A C; Pustovit, V N; Niklasson, G A

    2001-01-01

    Certain dust particles in space are expected to appear as clusters of individual grains. The morphology of these clusters could be fractal or compact. To determine how these structural features would affect the interpretation of the observed interstellar extinction peak at $\\sim 4.6~\\mu$m, we have calculated the extinction by compact and fractal polycrystalline graphite clusters consisting of touching identical spheres. We compare three general methods for computing the extinction of the clusters, namely, a rigorous solution and two different discrete-dipole approximation methods.

  14. High vacuum tribology of polycrystalline diamond coatings

    Indian Academy of Sciences (India)

    Awadesh K Mallik; S A Shivashankar; S K Biswas

    2009-10-01

    Polycrystalline diamond coatings have been grown on unpolished side of Si(100) wafers by hot filament chemical vapour deposition process. The morphology of the grown coatings has been varied from cauliflower morphology to faceted morphology by manipulation of the growth temperature from 700°C to 900°C and methane gas concentration from 3% to 1·5%. It is found that the coefficient of friction of the coatings under high vacuum of 133·32 × 10-7 Pa (10-7 torr) with nanocrystalline grains can be manipulated to 0·35 to enhance tribological behaviour of bare Si substrates.

  15. Novel mercuric iodide polycrystalline nuclear particles counters

    Energy Technology Data Exchange (ETDEWEB)

    Schieber, M. [Hebrew Univ. of Jerusalem (Israel)]|[Sandia National Lab., Livermore, CA (United States); Zuck, A.; Braiman, M.; Nissenbaum, J. [Hebrew Univ. of Jerusalem (Israel)] [and others

    1996-12-31

    Polycrystalline mercuric iodide nuclear radiation detectors having areas between 0.01 to 100 cm{sup 2} and thicknesses 30 to 600 microns, have been fabricated with single, linear strip and square pixel contact. The large area detectors 10 to 600 cm{sup 2} were produced by industrial ceramic equipment while the smaller ones, about 1 cm{sup 2} area, were produced in the laboratory. The large detectors still had large leakage currents and the production process is being revised. The smaller detectors were tested and their response to lower and higher gamma energy, beta and even 100 GeV muons at CERN will be reported.

  16. Superelastic effect in polycrystalline ferrous alloys.

    Science.gov (United States)

    Omori, T; Ando, K; Okano, M; Xu, X; Tanaka, Y; Ohnuma, I; Kainuma, R; Ishida, K

    2011-07-01

    In superelastic alloys, large deformation can revert to a memorized shape after removing the stress. However, the stress increases with increasing temperature, which limits the practical use over a wide temperature range. Polycrystalline Fe-Mn-Al-Ni shape memory alloys show a small temperature dependence of the superelastic stress because of a small transformation entropy change brought about by a magnetic contribution to the Gibbs energies. For one alloy composition, the superelastic stress varies by 0.53 megapascal/°C over a temperature range from -196 to 240°C.

  17. Anomalous Hall effect in polycrystalline Ni films

    KAUST Repository

    Guo, Zaibing

    2012-02-01

    We systematically studied the anomalous Hall effect in a series of polycrystalline Ni films with thickness ranging from 4 to 200 nm. It is found that both the longitudinal and anomalous Hall resistivity increased greatly as film thickness decreased. This enhancement should be related to the surface scattering. In the ultrathin films (46 nm thick), weak localization corrections to anomalous Hall conductivity were studied. The granular model, taking into account the dominated intergranular tunneling, has been employed to explain this phenomenon, which can explain the weak dependence of anomalous Hall resistivity on longitudinal resistivity as well. © 2011 Elsevier Ltd. All rights reserved.

  18. LOW TEMPERATURE SINTERING OF ALUMINA BIOCERAMIC UNDER NORMAL PRESSURE

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Superfine alumina powder with high purity (mean particle size is less than 0. 35μm) were used as main starting material for sintering alumina ceramic. A multiple additive MgO-ZrO2 (Y2O3) was homogeneously added into the batch by the chemical coprecipitation method. Sintering of alumina bioceramic at low tempera ture (<1600C) was achieved resulting in a dense and high strength alumina ceramic with the bending strength up to 382 MPa and an improved fracture toughness. Mechanism that the multiple additives promote the sintering of alumina ceramic is discussed on the base of XRD and SEM analysis.

  19. Thermal Conductivity of Alumina-Toughened Zirconia Composites

    Science.gov (United States)

    Bansal, Narottam P.; Zhu, Dong-Ming

    2003-01-01

    10-mol% yttria-stabilized zirconia (10YSZ)-alumina composites containing 0 to 30 mol% alumina were fabricated by hot pressing at 1500 C in vacuum. Thermal conductivity of the composites, determined at various temperatures using a steady-state laser heat flux technique, increased with increase in alumina content. Composites containing 0, 5, and 10-mol% alumina did not show any change in thermal conductivity with temperature. However, those containing 20 and 30-mol% alumina showed a decrease in thermal conductivity with increase in temperature. The measured values of thermal conductivity were in good agreement with those calculated from simple rule of mixtures.

  20. Effect of Citric Acid on the Gel-casting of Alumina%柠檬酸对凝胶浇注成形工艺中氧化铝浆料固化的影响

    Institute of Scientific and Technical Information of China (English)

    董满江; 张兆泉; 刘茜; 江东亮

    2006-01-01

    本文研究了pH=4.5时柠檬酸对氧化铝浆料固化的影响.用流变仪测试过硫酸铵(APS)和四甲基乙二胺(TEMED)氧化还原体系作为引发体系引发丙烯酰胺(AM)自由基聚合过程,交联剂为N,N'-亚甲基双丙烯酰胺(MBAM).通过体系聚合过程的复数模量G*和温度的变化曲线,讨论了柠檬酸对丙烯酰胺自由基聚合的阻聚作用,并用乙酸加以验证,说明有机酸使氧化铝浆料不能固化的原因.

  1. Stabilization of Self-Assembled Alumina Mesophases

    NARCIS (Netherlands)

    Perez, Lidia Lopez; Perdriau, Sebastien; ten Brink, Gert; Kooi, Bart J.; Heeres, Hero Jan; Melian-Cabrera, Ignacio

    2013-01-01

    An efficient route to stabilize alumina mesophases derived from evaporation-induced self-assembly is reported after investigating various aspects in-depth: influence of the solvent (EtOH, s-BuOH, and t-BuOH) on the textural and structural properties of the mesophases based on aluminum

  2. Selective metallization of alumina by laser

    NARCIS (Netherlands)

    Shrivastva, P.B.; Boose, C.A.; Kolster, B.H.; Harteveld, C.; Meinders, B.

    1991-01-01

    Nickel has been selectively deposited on an alumina substrate without any pretreatment from a flow of a nickel acetate solution using the focused beam of an excimer laser. Nickel spots as well as nickel lines were drawn and subsequently plated with an electroless Ni-B coating. Excellent adhesion of

  3. Stabilization of Self-Assembled Alumina Mesophases

    NARCIS (Netherlands)

    Perez, Lidia Lopez; Perdriau, Sebastien; ten Brink, Gert; Kooi, Bart J.; Heeres, Hero Jan; Melian-Cabrera, Ignacio

    2013-01-01

    An efficient route to stabilize alumina mesophases derived from evaporation-induced self-assembly is reported after investigating various aspects in-depth: influence of the solvent (EtOH, s-BuOH, and t-BuOH) on the textural and structural properties of the mesophases based on aluminum tri-sec-butoxi

  4. alumina phase transformation from thermal decomposition of ...

    African Journals Online (AJOL)

    HOD

    INTRODUCTION. Alumina is one of the major components used as catalyst support ... used for processing petroleum, gas, petrochemicals and for other ... The extent and total conversion to the corundum ... purification, vegetable glues, porcelain cements, natural deodorant ..... Catalyst in Steam Reforming of Dimethyl ether:.

  5. MECHANICAL BEHAVIOUR OF ALUMINA-ZIRCONIA COMPOSITE BY SLURRY METHOD

    Directory of Open Access Journals (Sweden)

    JYOTI PRAKASH

    2011-02-01

    Full Text Available Alumina has got some excellent properties like chemical inertness, thermal and mechanical strength against hazardous environment. Alumina is a good ceramic material which is being used for structuralapplications. To enhance the toughness and strength of the body some Zirconia is also used with it. The use of Zirconia in alumina is known as toughening of alumina. One difficulty arises, when alumina and alumina toughened composite are sintered , because the low sinterability of Alumina-Zirconia forced the compact to give very low density body. To overcome this problem alumina and alumina composites are made from slurry method which gives nearly theoretical density. The combined effect of alumina and Zirconia on the phase transformation and microstructure development of heat-treated Alumina-Zirconia composites has been studied. Slurry is prepared by adding water, dispersant, binder and anti-foaming agent. In the present study, Sintering schedule is optimized and kept constant for all samples. After sintering, mechanical behaviour of the composite has been studied.

  6. Surface modification of alumina nanoparticles with silane coupling agents

    Energy Technology Data Exchange (ETDEWEB)

    Prado, Luis A.S.A.; Sriyai, Montira; Ghislandi, Marcos; Schulte, Karl [Technische Universitaet Hamburg-Harburg, Hamburg (Germany). Inst. fuer Kunststoffe und Verbundwerkstoffe (M-11); Barros-Timmons, Ana [University of Aveiro (Portugal). Dept. of Chemistry. Centro de Investigacao em Materiais Ceramicos e Compositos (CICECO)

    2010-07-01

    In the present paper we describe the surface modification of alumina nanoparticles using epoxy-containing alkoxysilanes (silane coupling agents, SCA). The materials were characterized using infrared spectroscopy and solid-state nuclear magnetic resonance. Whereas, neat alumina nanoparticles could be expectedly modified with the afore mentioned SCA, as evidenced by {sup 13}C CPMAS NMR, the presence of arylsulphonates at the surface of alumina caused the ringopening polymerization of the epoxide. This polymerization reaction facilitated the surface modification of alumina by the SCA. X-ray powder diffraction and {sup 27}Al MAS NMR clearly demonstrated that in spite of the SCA polymerization, there were neither structural changes nor phase transitions in the alumina after the surface modification. The surface modification decreased the thermal stability of alumina, in comparison to pristine alumina nanoparticles. (author)

  7. Synthesis of alumina-α using aluminium acetate; Sintese de alumina-α utilizando acetato de aluminio

    Energy Technology Data Exchange (ETDEWEB)

    Cartaxo, J.M.; Galdino, M.N.; Neves, G.A., E-mail: lulianamelo25@gmail.com [Universidade Federal de Campina Grande (UFCG), PB (Brazil). Unidade Academica de Engenharia de Materiais; Menezes, R.R.; Ferreira, H.S. [Universidade Federal da Paraiba (UFPB), Joao Pessoa, PB (Brazil). Departamento de Engenharia de Materiais

    2011-07-01

    In the face of great technological importance of alumina, this paper aims to synthesize the α-alumina using chemical activation from aluminum acetate. The synthesized powders were characterized by X-ray diffraction and thermal analysis. The results obtained proved the thermal decomposition of the precursor, as well as possible metastable phases of alumina before the phase transformation in α. There was also difficult to obtain α-alumina from aluminum acetate, on the other hand there was, comparatively, that the chemical activation accelerated the synthesis of α-alumina. (author)

  8. Degradation of alumina and zirconia toughened alumina (ZTA) hip prostheses tested under microseparation conditions in a shock device

    CERN Document Server

    Uribe, Juliana; Gremillard, Laurent; Reynard, Bruno

    2013-01-01

    This paper considers the degradation of alumina and zirconia toughened alumina vs. alumina for hip implants. The materials are as assumed to be load bearing surfaces subjected to shocks in wet conditions. The load is a peak of force; 9 kN was applied over 15 ms at 2 Hz for 800,000 cycles. The volumetric wear and roughness are lower for ZTA than for alumina. The long ZTA ageing did not seem to have a direct influence on the roughness. The ageing increased the wear volumes of ZTA and it was found to have a higher wear resistance compared to alumina.

  9. Transparent alumina: A light scattering model

    NARCIS (Netherlands)

    Apetz, R.; Van Bruggen, P.B.

    2003-01-01

    A model based on Rayleigh-Gans-Debye light scattering theory has been developed to describe the light transmission properties of fine-grained, fully dense polycrystalline ceramics consisting of birefringent crystals. This model extends light transmission models based on geometrical optics, which are

  10. Polycrystalline thin film materials and devices

    Energy Technology Data Exchange (ETDEWEB)

    Baron, B.N.; Birkmire, R.W.; Phillips, J.E.; Shafarman, W.N.; Hegedus, S.S.; McCandless, B.E. (Delaware Univ., Newark, DE (United States). Inst. of Energy Conversion)

    1992-10-01

    Results of Phase II of a research program on polycrystalline thin film heterojunction solar cells are presented. Relations between processing, materials properties and device performance were studied. The analysis of these solar cells explains how minority carrier recombination at the interface and at grain boundaries can be reduced by doping of windows and absorber layers, such as in high efficiency CdTe and CuInSe{sub 2} based solar cells. The additional geometric dimension introduced by the polycrystallinity must be taken into consideration. The solar cells are limited by the diode current, caused by recombination in the space charge region. J-V characteristics of CuInSe{sub 2}/(CdZn)S cells were analyzed. Current-voltage and spectral response measurements were also made on high efficiency CdTe/CdS thin film solar cells prepared by vacuum evaporation. Cu-In bilayers were reacted with Se and H{sub 2}Se gas to form CuInSe{sub 2} films; the reaction pathways and the precursor were studied. Several approaches to fabrication of these thin film solar cells in a superstrate configuration were explored. A self-consistent picture of the effects of processing on the evolution of CdTe cells was developed.

  11. Graphene coated with alumina and its utilization as a thermal conductivity enhancer for alumina sphere/thermoplastic polyurethane composite

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ki Tae; Dao, Trung Dung [Department of Chemistry, Energy Harvest-Storage Research Center, University of Ulsan, Ulsan 680-749 (Korea, Republic of); Jeong, Han Mo, E-mail: hmjeong@mail.ulsan.ac.kr [Department of Chemistry, Energy Harvest-Storage Research Center, University of Ulsan, Ulsan 680-749 (Korea, Republic of); Anjanapura, Raghu V. [Center for Emerging Technologies, Jain Global Campus, Jain University, Jakkasandra, Ramanagara 562-112 (India); Aminabhavi, Tejraj M. [Soniya College of Pharmacy, S. R. Nagar, Dharwad 580-002 (India)

    2015-03-01

    Graphene was oxidized with H{sub 2}O{sub 2} to introduce additional anchoring sites for effective alumina coating on graphene by the sol–gel method. The X-ray photoelectron spectroscopy studies showed that the oxygen-containing groups such as hydroxyl group useful for coating were introduced by the oxidation. The transmission electron microscopy images and thermogravimetric analysis data demonstrated that the additional anchoring sites enhanced the efficiency of the alumina coating. A small amount of alumina-coated graphene synergistically improved the thermal conductivity of the alumina sphere/thermoplastic polyurethane (TPU) composite without any increase in the electrical conductivity, because the electrical conductivity of graphene effectively decreased by the alumina coating. Moreover, the synergistic effect of a small amount of graphene was enhanced by the alumina coating, and the stiffening of the alumina sphere/TPU composite due to the added graphene was alleviated by the alumina coating. - Highlights: • Oxidation of graphene with H{sub 2}O{sub 2} introduced anchoring sites for alumina coating. • The anchoring sites improved the efficiency of alumina coating on graphene. • The alumina-coated graphene synergistically enhanced the thermal conductivity.

  12. Rheological Properties of Aqueous Nanometric Alumina Suspensions

    Energy Technology Data Exchange (ETDEWEB)

    Li, Chuanping [Iowa State Univ., Ames, IA (United States)

    2004-01-01

    Colloidal processing is an effective and reliable approach in the fabrication of the advanced ceramic products. Successful colloidal processing of fine ceramic powders requires accurate control of the rheological properties. The accurate control relies on the understanding the influences of various colloidal parameters on the rheological properties. Almost all research done on the rheology paid less attention to the interactions of particle and solvent. However, the interactions of the particles are usually built up through the media in which the particles are suspended. Therefore, interactions of the particle with the media, the adsorbed layers on the particle surface, and chemical and physical properties of media themselves must influence the rheology of the suspension, especially for the dense suspensions containing nanosized particles. Relatively little research work has been reported in this area. This thesis addresses the rheological properties of nanometric alumina aqueous suspensions, and paying more attention to the interactions between particle and solvent, which in turn influence the particle-particle interactions. Dense nanometric alumina aqueous suspensions with low viscosity were achieved by environmentally-benign fructose additives. The rheology of nanometric alumina aqueous suspensions and its variation with the particle volume fraction and concentration of fructose were explored by rheometry. The adsorptions of solute (fructose) and solvent (water) on the nanometric alumina particle surfaces were measured and analyzed by TG/DSC, TOC, and NMR techniques. The mobility of water molecules in the suspensions and its variation with particle volume fractions and fructose additive were determined by the 17O NMR relaxation method. The interactions between the nanometric alumina particles in water and fructose solutions were investigated by AFM. The results indicated that a large number of water layers were physically bound on the particles

  13. Rheological Properties of Aqueous Nanometric Alumina Suspensions

    Energy Technology Data Exchange (ETDEWEB)

    Chuanping Li

    2004-12-19

    Colloidal processing is an effective and reliable approach in the fabrication of the advanced ceramic products. Successful colloidal processing of fine ceramic powders requires accurate control of the rheological properties. The accurate control relies on the understanding the influences of various colloidal parameters on the rheological properties. Almost all research done on the rheology paid less attention to the interactions of particle and solvent. However, the interactions of the particles are usually built up through the media in which the particles are suspended. Therefore, interactions of the particle with the media, the adsorbed layers on the particle surface, and chemical and physical properties of media themselves must influence the rheology of the suspension, especially for the dense suspensions containing nanosized particles. Relatively little research work has been reported in this area. This thesis addresses the rheological properties of nanometric alumina aqueous suspensions, and paying more attention to the interactions between particle and solvent, which in turn influence the particle-particle interactions. Dense nanometric alumina aqueous suspensions with low viscosity were achieved by environmentally-benign fructose additives. The rheology of nanometric alumina aqueous suspensions and its variation with the particle volume fraction and concentration of fructose were explored by rheometry. The adsorptions of solute (fructose) and solvent (water) on the nanometric alumina particle surfaces were measured and analyzed by TG/DSC, TOC, and NMR techniques. The mobility of water molecules in the suspensions and its variation with particle volume fractions and fructose additive were determined by the {sup 17}O NMR relaxation method. The interactions between the nanometric alumina particles in water and fructose solutions were investigated by AFM. The results indicated that a large number of water layers were physically bound on the particles

  14. Lateral boron distribution in polycrystalline SiC source materials

    DEFF Research Database (Denmark)

    Linnarsson, M. K.; Kaiser, M.; Liljedahl, R.

    2013-01-01

    Polycrystalline SiC containing boron and nitrogen are used in growth of fluorescent SiC for white LEDs. Two types of doped polycrystalline SiC have been studied in detail with secondary ion mass spectrometry: sintered SiC and poly-SiC prepared by sublimation in a physical vapor transport setup...

  15. Multiscale modeling of thermal conductivity of polycrystalline graphene sheets.

    Science.gov (United States)

    Mortazavi, Bohayra; Pötschke, Markus; Cuniberti, Gianaurelio

    2014-03-21

    We developed a multiscale approach to explore the effective thermal conductivity of polycrystalline graphene sheets. By performing equilibrium molecular dynamics (EMD) simulations, the grain size effect on the thermal conductivity of ultra-fine grained polycrystalline graphene sheets is investigated. Our results reveal that the ultra-fine grained graphene structures have thermal conductivity one order of magnitude smaller than that of pristine graphene. Based on the information provided by the EMD simulations, we constructed finite element models of polycrystalline graphene sheets to probe the thermal conductivity of samples with larger grain sizes. Using the developed multiscale approach, we also investigated the effects of grain size distribution and thermal conductivity of grains on the effective thermal conductivity of polycrystalline graphene. The proposed multiscale approach on the basis of molecular dynamics and finite element methods could be used to evaluate the effective thermal conductivity of polycrystalline graphene and other 2D structures.

  16. Control of the γ-alumina to α-alumina phase transformation for an optimized alumina densification

    Energy Technology Data Exchange (ETDEWEB)

    Lamouri, S.; Hamidouche, M.; Bouaouadja, N.; Belhouchet, H.; Garnier, V.; Fantozzi, G.; Trelkat, J.F.

    2017-07-01

    In this work, we studied the aptitude to sintering green bodies using γ-Al2O3 transition alumina as raw powder. We focused on the influence of the heating rate on densification and microstructural evolution. Phase transformations from transition alumina γ→δ→θ→α-Al2O3 were studied by in situ X-rays diffraction from the ambient to 1200°C. XRD patterns revealed coexistence of various phase transformations during the heating cycle. DTA and dilatometry results showed that low heating rate leads to a significant reduction of the temperature of the α-Al2O3 alumina formation. Around 1190, 1217 and 1240°C were found when using 5, 10 and 20°C/min of heating rate, respectively. The activation energy for θ-Al2O3→α-Al2O3 transformation calculated by Kissinger and JMA equations using dilatometry method were 464.29 and 488.79kJ/mol, respectively and by DTA method were 450.72 and 475.49kJ/mol, respectively. In addition, the sintering of the green bodies with low heating rate promotes the rearrangement of the grains during θ-Al2O3→α-Al2O3 transformation, enhancing the relative density to 95% and preventing the development of a vermicular structure. (Author)

  17. Control of the γ-alumina to α-alumina phase transformation for an optimized alumina densification

    Directory of Open Access Journals (Sweden)

    Samir Lamouri

    2017-03-01

    Full Text Available In this work, we studied the aptitude to sintering green bodies using γ-Al2O3 transition alumina as raw powder. We focused on the influence of the heating rate on densification and microstructural evolution. Phase transformations from transition alumina γ → δ → θ → α-Al2O3 were studied by in situ X-rays diffraction from the ambient to 1200 °C. XRD patterns revealed coexistence of various phase transformations during the heating cycle. DTA and dilatometry results showed that low heating rate leads to a significant reduction of the temperature of the α-Al2O3 alumina formation. Around 1190, 1217 and 1240 °C were found when using 5, 10 and 20 °C/min of heating rate, respectively. The activation energy for θ-Al2O3 → α-Al2O3 transformation calculated by Kissinger and JMA equations using dilatometry method were 464.29 and 488.79 kJ/mol, respectively and by DTA method were 450.72 and 475.49 kJ/mol, respectively. In addition, the sintering of the green bodies with low heating rate promotes the rearrangement of the grains during θ-Al2O3 → α-Al2O3 transformation, enhancing the relative density to 95% and preventing the development of a vermicular structure.

  18. Modeling of Irradiation Hardening of Polycrystalline Materials

    Energy Technology Data Exchange (ETDEWEB)

    Li, Dongsheng; Zbib, Hussein M.; Garmestani, Hamid; Sun, Xin; Khaleel, Mohammad A.

    2011-09-14

    High energy particle irradiation of structural polycrystalline materials usually produces irradiation hardening and embrittlement. The development of predict capability for the influence of irradiation on mechanical behavior is very important in materials design for next generation reactors. In this work a multiscale approach was implemented to predict irradiation hardening of body centered cubic (bcc) alpha-iron. The effect of defect density, texture and grain boundary was investigated. In the microscale, dislocation dynamics models were used to predict the critical resolved shear stress from the evolution of local dislocation and defects. In the macroscale, a viscoplastic self-consistent model was applied to predict the irradiation hardening in samples with changes in texture and grain boundary. This multiscale modeling can guide performance evaluation of structural materials used in next generation nuclear reactors.

  19. Polycrystalline silicon ion sensitive field effect transistors

    Science.gov (United States)

    Yan, F.; Estrela, P.; Mo, Y.; Migliorato, P.; Maeda, H.; Inoue, S.; Shimoda, T.

    2005-01-01

    We report the operation of polycrystalline silicon ion sensitive field effect transistors. These devices can be fabricated on inexpensive disposable substrates such as glass or plastics and are, therefore, promising candidates for low cost single-use intelligent multisensors. In this work we have developed an extended gate structure with a Si3N4 sensing layer. Nearly ideal pH sensitivity (54mV /pH) and stable operation have been achieved. Temperature effects have been characterized. A penicillin sensor has been fabricated by functionalizing the sensing area with penicillinase. The sensitivity to penicillin G is about 10mV/mM, in solutions with concentration lower than the saturation value, which is about 7 mM.

  20. Polycrystalline-thin-film thermophotovoltaic cells

    Science.gov (United States)

    Dhere, Neelkanth G.

    1996-02-01

    Thermophotovoltaic (TPV) cells convert thermal energy to electricity. Modularity, portability, silent operation, absence of moving parts, reduced air pollution, rapid start-up, high power densities, potentially high conversion efficiencies, choice of a wide range of heat sources employing fossil fuels, biomass, and even solar radiation are key advantages of TPV cells in comparison with fuel cells, thermionic and thermoelectric convertors, and heat engines. The potential applications of TPV systems include: remote electricity supplies, transportation, co-generation, electric-grid independent appliances, and space, aerospace, and military power applications. The range of bandgaps for achieving high conversion efficiencies using low temperature (1000-2000 K) black-body or selective radiators is in the 0.5-0.75 eV range. Present high efficiency convertors are based on single crystalline materials such as In1-xGaxAs, GaSb, and Ga1-xInxSb. Several polycrystalline thin films such as Hg1-xCdxTe, Sn1-xCd2xTe2, and Pb1-xCdxTe, etc., have great potential for economic large-scale applications. A small fraction of the high concentration of charge carriers generated at high fluences effectively saturates the large density of defects in polycrystalline thin films. Photovoltaic conversion efficiencies of polycrystalline thin films and PV solar cells are comparable to single crystalline Si solar cells, e.g., 17.1% for CuIn1-xGaxSe2 and 15.8% for CdTe. The best recombination-state density Nt is in the range of 10-15-10-16 cm-3 acceptable for TPV applications. Higher efficiencies may be achieved because of the higher fluences, possibility of bandgap tailoring, and use of selective emitters such as rare earth oxides (erbia, holmia, yttria) and rare earth-yttrium aluminium garnets. As compared to higher bandgap semiconductors such as CdTe, it is easier to dope the lower bandgap semiconductors. TPV cell development can benefit from the more mature PV solar cell and opto

  1. Multifunctional Polycrystalline Ferroelectric Materials Processing and Properties

    CERN Document Server

    Pardo, Lorena

    2011-01-01

    This book presents selected topics on processing and properties of ferroelectric materials that are currently the focus of attention in scientific and technical research. Ferro-piezoelectric ceramics are key materials in devices for many applications, such as automotive, healthcare and non-destructive testing. As they are polycrystalline, non-centrosymmetric materials, their piezoelectricity is induced by the so-called poling process. This is based on the principle of polarization reversal by the action of an electric field that characterizes the ferroelectric materials. This book was born with the aim of increasing the awareness of the multifunctionality of ferroelectric materials among different communities, such as researchers, electronic engineers, end-users and manufacturers, working on and with ferro-piezoelectric ceramic materials and devices which are based on them. The initiative to write this book comes from a well-established group of researchers at the Laboratories of Ferroelectric Materials, Mate...

  2. Novel mercuric iodide polycrystalline nuclear particle counters

    Energy Technology Data Exchange (ETDEWEB)

    Schieber, M. [Hebrew Univ. of Jerusalem (Israel)]|[Sandia National Labs., Livermore, CA (United States); Zuck, A.; Braiman, M.; Nissenbaum, J. [Hebrew Univ. of Jerusalem (Israel); Turchetta, R.; Dulinski, W.; Husson, D.; Riester, J.L. [LEPSI, Strasbourg (France)

    1997-12-01

    Polycrystalline mercuric iodide nuclear radiation detectors have been produced in a novel technology. Unlike the normal single-crystal technology, there is no intrinsic limit to the surface on which these detectors can be produced. Detectors with areas up to about 1.5 cm{sup 2}, thicknesses from 30 to 600 {micro}m, and with single electrodes as well as microstrip and pixel contacts have been fabricated and successfully tested with photons in the range of 40--660 keV, {beta} particle`s emitted from a Sr-Y source, and high energy (100 GeV) muons. Results on both charge collection and counting efficiency are reported as well as some very preliminary imaging results. The experimental results on charge collection have been compared with simulation, and a combined {mu}{tau} product 10{sup {minus}7} cm{sup 2}/V for electrons has been estimated.

  3. Influence of alumina characteristics on glaze properties

    Directory of Open Access Journals (Sweden)

    Arrufat, S.

    2010-10-01

    Full Text Available Aluminium oxide is a synthetic raw material manufactured from bauxite by the Bayer process, whose Al2O3 content typically exceeds 99%. Four main types of alumina can be defined, depending on the processing used: hydrargillite Al(OH3, boehmite AlOOH, transition aluminas (calcined at low temperatures, 1000 °C, with an intermediary crystallographic structure between hydrates and alpha alumina, and α-Al2O3 (calcined at high temperatures, >1100 °C. In glaze manufacturing, α-Al2O3 is the main type of alumina used. This raw material acts as a matting agent: the matt effect depends on alumina particle size and content in the glaze. This study examines the effect of the degree of alumina calcination on glaze technical and aesthetic properties. For this purpose, aluminas with different degrees of calcination were added to a glaze formulated with a transparent frit and kaolin, in order to simplify the system to be studied. The results show that, depending on the degree of calcination, alumina particles can react with the glaze components (SiO2, CaO, and ZnO to form new crystalline phases (anorthite and gahnite. Both crystallisations extract CaO and ZnO from the glassy phase, increasing glassy phase viscosity. The variation in crystalline phases and glassy phase viscosity yields glazes with different technical and aesthetic properties.

    El óxido de aluminio es una materia prima sintética fabricada a partir de la bauxita por medio del proceso Bayer, cuyo contenido de Al2O3 supera, por regla general, el 99%. Se pueden definir cuatro tipos de alúmina, en función del tipo de proceso usado: hidrargilita Al(OH3, boehmita AlOOH, alúminas de transición (calcinadas a bajas temperaturas, 1000 °C, con una estructura cristalográfica intermedia entre los hidratos y la alfa alúmina, y la α-Al2O3 (calcinada a

  4. Impact of AD995 alumina rods

    Energy Technology Data Exchange (ETDEWEB)

    Chhabildas, L.C.; Furnish, M.D.; Reinhart, W.D. [Sandia National Labs., Albuquerque, NM (United States); Grady, D.E. [Applied Research Associates, Inc., Albuquerque, NM (United States)

    1997-10-01

    Gas guns and velocity interferometric techniques have been used to determine the loading behavior of an AD995 alumina rod 19 mm in diameter by 75 mm and 150 mm long, respectively. Graded-density materials were used to impact both bare and sleeved alumina rods while the velocity interferometer was used to monitor the axial-velocity of the free end of the rods. Results of these experiments demonstrate that (1) a time-dependent stress pulse generated during impact allows an efficient transition from the initial uniaxial strain loading to a uniaxial stress state as the stress pulse propagates through the rod, and (2) the intermediate loading rates obtained in this configuration lie between split Hopkinson bar and shock-loading techniques.

  5. Nanoparticles in alumina: Microscopy and Theory

    Science.gov (United States)

    Idrobo, Juan C.; Halabica, Andrej; Rashkeev, Sergey; Glazoff, Michael V.; Boatner, Lynn A.; Haglund, Richard F.; Pennycook, Stephen. J.; Pantelides, Sokrates T.

    2007-03-01

    Transition-metal nanoparticles formed by ion implantation in alumina can be used to modify the optical properties of naturally oxidized and anodized aluminum. Here, we report atomic-resolution Z-contrast images using a scanning transmission electron microscope (STEM) of CoFe and other metal nanoparticles in alumina. We also report electron energy loss spectra (EELS) and relate them to visual appearance and optical properties. Finally, we report first-principles density- functional calculations of nucleation mechanisms for these nanoparticles. This research was sponsored by the Office of Basic Energy Sciences, Division of Materials Sciences and Engineering, U.S. Department of Energy, under contract DE-AC05- 00OR22725 with Oak Ridge National Laboratory, managed and operated by UT-Battelle, by NSF grant No. DMR-0513048, and by Alcoa Inc.

  6. Silica containing highly porous alumina ceramic

    Science.gov (United States)

    Svinka, R.; Svinka, V.; Zake, I.

    2011-04-01

    Porous alumina ceramic were produced by slip casting of aqueous alumina slurry with added small amount of metallic aluminium powder. Pores form in result of chemical reaction of aluminum with water by hydrogen gas evolution reaction and solidification of suspension. Porosity of such materials sintered at a temperature of 1600 - 1750°C varies from 60 to 90%. Pore size distribution and mechanical strength of these materials depend largely on the grain size of used raw materials. The major part of pores in the materials produced without additive of silica are larger than 10 ±m, but with 5 - 10 wt.% additive of silica in the raw mix pore size decreases considerably. The sintering shrinkage decreases to 2.5%. Coefficient of thermal expansion equally decreases from 8.9-10-6 K-1 to 7.1 10-6 K-1 and classification temperature increases to 1600°C, while deformation at high temperature decreases considerably.

  7. Improvement in nanoscale contact resistance of alumina

    Energy Technology Data Exchange (ETDEWEB)

    Bhattacharya, Manjima; Chakraborty, Riya; Mandal, Ashok Kumar [CSIR - Central Glass and Ceramic Research Institute, Kolkata (India); Dey, Arjun [CSIR - Central Glass and Ceramic Research Institute, Kolkata (India); ISRO Satellite Centre, Thermal Systems Group, Bangalore (India); Mukhopadhyay, Anoop Kumar [CSIR - Central Glass and Ceramic Research Institute, Kolkata (India); Central Glass and Ceramic Research Institute, Kolkata 32 (India)

    2012-06-15

    In all contact-related applications such as the wear-resistant inserts, biomedical implants, high strain rate impact-resistant plates, etc., nanohardness, i.e. the intrinsic contact resistance at the nano scale, plays a major role. In spite of the wealth of literature, the studies on nanohardness of dense, coarse-grain alumina ceramics which represent many commercial varieties; have reasonably good hardness at the macro scale and characteristically exhibit R-curve behaviour, are far from significant. Here, to the best of our knowledge, we report for the first time the experimental observations of the increase in intrinsic contact resistance at the nano scale with the loading rate applied to a high-density ({proportional_to}95 % of theoretical) coarse-grain ({proportional_to}20 {mu}m) alumina ceramics. These observations were explained in terms of the initiation of nanoscale plasticity and maximum shear stress generated just underneath the nanoindenter. (orig.)

  8. IMPEDANCE SPECTROSCOPY OF POLYCRYSTALLINE TIN DIOXIDE FILMS

    Directory of Open Access Journals (Sweden)

    D. V. Adamchuck

    2016-01-01

    Full Text Available The aim of this work is the analysis of the influence of annealing in an inert atmosphere on the electrical properties and structure of non-stoichiometric tin dioxide films by means of impedance spectroscopy method. Non-stoichiometric tin dioxide films were fabricated by two-step oxidation of metallic tin deposited on the polycrystalline Al2O3 substrates by DC magnetron sputtering. In order to modify the structure and stoichiometric composition, the films were subjected to the high temperature annealing in argon atmosphere in temperature range 300–800 °С. AC-conductivity measurements of the films in the frequency range 20 Hz – 2 MHz were carried out. Variation in the frequency dependencies of the real and imaginary parts of the impedance of tin dioxide films was found to occur as a result of high-temperature annealing. Equivalent circuits for describing the properties of films with various structure and stoichiometric composition were proposed. Possibility of conductivity variation of the polycrystalline tin dioxide films as a result of аnnealing in an inert atmosphere was demonstrated by utilizing impedance spectroscopy. Annealing induces the recrystallization of the films, changing in their stoichiometry as well as increase of the sizes of SnO2 crystallites. Variation of electrical conductivity and structure of tin dioxide films as a result of annealing in inert atmosphere was confirmed by X-ray diffraction analysis. Analysis of the impedance diagrams of tin dioxide films was found to be a powerful tool to study their electrical properties. 

  9. Tribology of alumina-graphite composites

    Science.gov (United States)

    Yu, Chih-Yuan

    Alumina-graphite composites, which combine high wear resistance and self-lubricity, are a potential and promising candidate for advanced tribological applications. The processing, mechanical properties and tribology of alumina-graphite composites are discussed. Full density is difficult to achieve by a pressureless sintering route. Porosity of the composites increases with graphite content which causes the strength, modulus of elasticity, and hardness of the composites to decrease. The increased porosity does cause the fracture toughness to slightly increases. Tribology of alumina-graphite composites was studied with a pin-on-disk tribometer with emphasis on the following aspects: the graphite content in both pin and disk, the graphite flake size and the orientation of the graphite flakes. Scan electronic microscopy (SEM) and X-ray diffraction are utilized to examine and characterize the wear debris and the worn surface. Results confirmed that it is necessary to optimize the structure and the supply of lubricant to improve the tribological behavior and that the arrangements of sliding couples also affect the tribology of self-lubricated ceramic composites. Continuous measurements of the friction coefficients were collected at high frequency in an attempt to correlate the tribology of alumina-graphite composites to vibrations introduced by friction. While these measurements indicate that the time frequency behavior of tribology is an important area of study, conclusions regarding the frequency response of different sliding couples could not be definitively stated. Finally, a new concept connecting instantaneous wear coefficient and instantaneous contact stress is proposed for prediction of wear behavior of brittle materials.

  10. Ultraviolet photoluminescence of porous anodic alumina films

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    Photoluminescence (PL) properties of porous anodic alumina (PAA) films prepared by using electrochemical anodization technique in a mixed solution of oxalic and sulfuric acid have been investigated. The PAA films have an intensive ultraviolet PL emission around 350 nm, of which a possible PL mechanism has been proposed. It was found that the incorporated oxalic ions, which could transform into PL centers and exist in the PAA films, are responsible for this ultraviolet PL emission.

  11. Synthesis and characterization of single-crystalline alumina nanowires

    Institute of Scientific and Technical Information of China (English)

    ZHAO Qing; XU Xiang-yu; ZHANG Hong-zhou; CHEN Yao-feng; XU Jun; YU Da-peng

    2005-01-01

    Alumina nanowires were synthesized on large-area silicon substrate via simple thermal evaporation method of heating a mixture of aluminum and alumina powders without using any catalyst or template. The phase structure and the surface morphology of the as-grown sample were analyzed by X-ray diffractometry(XRD) and scanning electron microscopy (SEM), respectively. The chemical composition and the microstructure of the as-grown alumina nanowires were characterized using transmission electron microscope(TEM). The nanowires are usually straight and the single crystalline has average diameter of 40 nm and length of 3 - 5 μm. The growth direction is along the [002] direction. Well aligned alumina nanowire arrays were observed on the surface of many large particles. The catalyst-free growth of the alumina nanowires was explained under the framework of a vapor-solid(VS)growth mechanism. This as-synthesized alumina nanowires could find potential applications in the fabrication of nanodevices.

  12. Porous Aluminas: The bio template method for the synthesis of stable high surface area aluminas; Aluminas porosas: El metodo de bio-replica para la sintesis de aluminas estables de alta superficie especifica

    Energy Technology Data Exchange (ETDEWEB)

    Benitez Guerrero, M.; Perez Maqueda, L.; Pena Castro, P.; Pascual Cosp, J.

    2013-07-01

    Development of porous alumina has been the objective of numerous studies in recent decades, due to the intrinsic properties of aluminium oxide, such as high melting point, low thermal conductivity, chemical inertness and corrosion resistance which, in addition to a high surface area and permeability, make aluminas being used for many different industrial and technical applications. The crystallographic and textural stability of alumina acquires significant importance in those processes involving high temperatures; however, most of the synthesis methods yield metastable oxides of little interest in high-temperature processes due to the transformation to alpha phase, with the consequent reduction in surface area. The present article reviews diverse procedures for obtaining porous alumina with high specific surface area, including methods and strategies for preparing high surface alpha-alumina. Within this framework, the paper analyzes the results obtained through bio replica of lignocellulose materials. This technology allows preparing aluminas with the complex structural hierarchy of the lignocellulose templates. (Author)

  13. Reologia, cinética de polimerização e resistência mecânica de sistemas para a produção de espumas cerâmicas via "Gelcasting" Rheology, kinetics of polymerization and strength of gelcasting systems for the production of ceramic foams

    Directory of Open Access Journals (Sweden)

    F. S. Ortega

    2001-06-01

    Full Text Available A associação da aeração de suspensões cerâmicas contendo um agente espumante ao processo "gelcasting" possibilitou o desenvolvimento de uma nova classe de cerâmicas porosas com propriedades sem precedentes. Um dos pontos mais importantes deste processo é a polimerização de precursores orgânicos dissolvidos na fase líquida, resultando na formação in situ de um gel, o qual enrijece a suspensão imediatamente após a formação da espuma, impedindo o colapso desta. Recentemente, alguns sistemas de monômeros tais como acrilato de amônio, hidroximetilacrilamida, ácido metacrílico, metacrilamida e metileno-bisacrilamida foram descritos como agentes gelificantes adequados para a produção de corpos densos. Entretanto, estudos sobre sistemas gelificantes visando a produção de espumas cerâmicas não são conhecidos, apesar da enorme importância desta etapa no processo, e do maior número de restrições existentes na produção de corpos porosos. Neste trabalho, os sistemas supracitados foram avaliados considerando critérios exigidos no processamento de espumas cerâmicas, tais como tempo de reação para a solidificação da espuma, interferência sobre a dispersão e comportamento reológico da suspensão, resistência mecânica a verde antes e após a secagem. Combinações de diferentes tipos de monômeros foram também investigadas com relação aos parâmetros acima citados. Os resultados obtidos permitem uma maior compreensão dos fenômenos observados no processo, além de fornecer subsídios para a seleção de sistemas gelificantes adequados à produção de cerâmicas porosas através desta nova técnica.The association of the gelcasting process with the aeration of ceramic suspensions containing a surfactant allowed the development of a new category of ceramic foams, which shows unprecedented properties. One of the key points of this process is the gelling reaction of organic monomers dissolved in the liquid phase

  14. Free-standing alumina nanobottles and nanotubes pre-integrated into nanoporous alumina membranes

    Science.gov (United States)

    Fang, Jinghua; Levchenko, Igor; (Ken Ostrikov, Kostya

    2014-08-01

    A novel interfacial structure consisting of long (up to 5 μm), thin (about 300 nm), highly-ordered, free-standing, highly-reproducible aluminum oxide nanobottles and long tubular nanocapsules attached to a rigid, thin (less than 1 μm) nanoporous anodic alumina membrane is fabricated by simple, fast, catalyst-free, environmentally friendly voltage-pulse anodization. A growth mechanism is proposed based on the formation of straight channels in alumina membrane by anodization, followed by neck formation due to a sophisticated voltage control during the process. This process can be used for the fabrication of alumina nanocontainers with highly controllable geometrical size and volume, vitally important for various applications such as material and energy storage, targeted drug and diagnostic agent delivery, controlled drug and active agent release, gene and biomolecule reservoirs, micro-biologically protected platforms, nano-bioreactors, tissue engineering and hydrogen storage.

  15. Avaliação de sistemas gelificantes para a produção de cerâmicas porosas através da técnica "gelcasting" de espumas

    Directory of Open Access Journals (Sweden)

    Ortega F. S.

    2000-01-01

    Full Text Available A associação da técnica "gelcasting" com o processo de aeração de suspensões cerâmicas permitiu o desenvolvimento de uma nova classe de espumas cerâmicas com propriedades sem precedentes entre as cerâmicas porosas. Um dos pontos mais importantes deste processo é a reação de gelificação, a qual enrijece a suspensão após a produção de espuma. Recentemente, alguns sistemas de monômeros tais como acrilato de amônio, hidroximetil-acrilamida, ácido metacrílico, metacrilamida e metileno-bisacrilamida foram descritos na literatura como agentes capazes de gelificar suspensões cerâmicas. Neste trabalho, estes sistemas foram estudados considerando critérios exigidos no processamento de espumas cerâmicas, como tempo de reação, interferência sobre o mecanismo de dispersão e comportamento reológico da suspensão, influência sobre o volume de espuma produzido, e resistência mecânica a verde dos corpos obtidos. Estudou-se também um sistema alternativo, baseado na formação de ligações cruzadas entre moléculas de álcool polivinílico (PVAl, o qual, ao contrário dos demais sistemas, não é inibido pela presença de oxigênio. Os resultados permitem uma maior clareza na seleção de sistemas gelificantes visando a produção de espumas cerâmicas através de gelcasting.

  16. Influence of TAC on Dispersion of Aqueous Nano Alumina Suspension

    Institute of Scientific and Technical Information of China (English)

    ZHAO Wei; YANG De-an; SONG Jian-jing; YANG Zi; LIANG Chong; XU Ming-xia; XU Ting-xian

    2004-01-01

    The stability of aqueous nano alumina powder suspensions with and without dispersant tri-ammonium citrate (TAC) was investigated by measuring zeta potential at different pH values. The isoelectric point (IEP) of alumina powder shifts towards more acidic pH range by adding TAC dispersant. The results illustrate that adsorption of TAC on alumina powder surface existed in the aqueous suspension, which leads to a high stability of the suspension.

  17. Novel self assembly behavior for γ-alumina nanoparticles

    Institute of Scientific and Technical Information of China (English)

    Osama Saber

    2012-01-01

    In this study,self assembly behavior was induced for γ-alumina nanoparticles by adsorption of dimethyl disulfide.Following this trend,we have developed a chemical process to obtain γ-alumina in the nano scale.Scanning electron microscopy images of the prepared γ-alumina showed big and strong agglomeration of the nanoparticles indicating that these nanoparticles have strong surface forces.Transmission electron microscopy images confirmed that the γ-alumina nanoparticles 3-7 nm in size were converted to uniform spherical shape in the size range of 1-2 mm after shaking with dimethyl disulfide in the presence of n-hexane at room temperature.This phenomenon did not appear in the case of alumina in the micro scale.The surface properties of the prepared γ-alumina in the nano scale were characterized and compared with the γ-alumina in the micro scale by using low temperature nitrogen adsorption-desorption system,indicating that the specific surface area of the prepared γ-alumina nanoparticles is larger than that of the γ-alumina in the micro scale.Furthermore,micro-and meso-pores were observed for the γ-alumina nanoparticles while only mesoporous structure was detected for the γ-alumina in the micro scale.These experimental results suggested that the self assembly behavior of the γ-alumina nanoparticles may be due to the selective adsorption of dimethyl disulfide in the micropores of these nanoparticles to act as bridge linking the nanoparticles.

  18. Electrical characteristics of polycrystalline Si layers embedded into high-k Al{sub 2}O{sub 3} gate layers

    Energy Technology Data Exchange (ETDEWEB)

    Park, Byoungjun; Cho, Kyoungah [Department of Electrical Engineering and Institute of Nano Science, Korea University, Seoul 136-701 (Korea, Republic of); Kim, Sangsig [Department of Electrical Engineering and Institute of Nano Science, Korea University, Seoul 136-701 (Korea, Republic of)], E-mail: sangsig@korea.ac.kr

    2008-09-30

    The electrical characteristics of polycrystalline Si (poly Si) layers embedded into high-k Al{sub 2}O{sub 3} (alumina) gate layers are investigated in this work. The capacitance versus voltage (C-V) curves obtained from the metal-alumina-polysilicon-alumina-silicon (MASAS) capacitors exhibit significant threshold voltage shifts, and the width of their hysteresis window is dependent on the range of the voltage sweep. The counterclockwise hysteresis observed in the C-V curves indicates that electrons originating from the p-type Si substrate in the inversion condition are trapped in the floating gate layer consisting of the poly Si layer present between the top and bottom Al{sub 2}O{sub 3} layers in the MASAS capacitor. Also, current versus voltage (I-V) measurements are performed to examine the electrical characteristics of the fabricated capacitors. The I-V measurements reveal that our MASAS capacitors show a very low leakage current density, compared to the previously reported results.

  19. Corrosion of Refractory Alumina-Graphite and Alumina-Graphite-Zirconia in Slag Containing Titania

    Institute of Scientific and Technical Information of China (English)

    XU Yuan; LIU Qing-cai; BAI Chen-guang; CHEN Deng-fu; Joseph W Newkirk

    2004-01-01

    The corrosion of refractory alumina-graphite and alumina-graphite-zirconia in the slag containing titania was studied by immersion tests (quasi-static and dynamic tests). Combining direct observation with microscopic investigations, a mechanism for corrosion was proposed based on the oxidation of graphite and the dissolution of refractory components. During the corrosion process, there are some special phenomena and laws that can be explained by the relation between the corrosion rate and the TiO2 mass percent, the rotational refractory velocity and the morphology of the deteriorated layer.

  20. Modelling the initial stage of porous alumina growth during anodization

    Science.gov (United States)

    Aryslanova, E. M.; Alfimov, A. V.; Chivilikhin, S. A.

    2013-05-01

    Artificially on the surface of aluminum there may be build a thick layer of Al2O3, which has a porous structure. In this paper we present a model of growth of porous alumina in the initial stage of anodizing, identifying dependencies anodizing parameters on the rate of growth of the film and the distance between the pores and as a result of the created model equations were found for changes in the disturbance of alumina for the initial stage of anodizing aluminum oxide porous border aluminum-alumina and alumina-electrolyte, with the influence of surface diffusion of aluminum oxide.

  1. Aqueous combustion synthesis and characterization of zirconia-alumina nanocomposites

    Energy Technology Data Exchange (ETDEWEB)

    Kishan, J.; Mangam, Venu; Reddy, B.S.B.; Das, Siddhartha [Department of Metallurgical and Materials Engineering, Indian Institute of Technology, Kharagpur, West Bengal 721302 (India); Das, Karabi, E-mail: karabi@metal.iitkgp.ernet.i [Department of Metallurgical and Materials Engineering, Indian Institute of Technology, Kharagpur, West Bengal 721302 (India)

    2010-02-04

    The zirconia-alumina nanocomposite powders with 3-48 mol% of alumina are prepared by aqueous combustion synthesis technique using stoichiometric amounts of aluminium nitrate, zirconyl nitrate and glycine. The nanopowders are compacted uniaxially and sintered at 1000 {sup o}C temperature in a muffle furnace. Thermodynamic modeling of the combustion reaction shows that, as the alumina content increases, the amount of gases produced increases with a decrease in the adiabatic flame temperature. The green and sintered densities of cold press composite powders decrease with an increase in the mol% of alumina.

  2. Rheology of Alumina-Based Graphite-Containing Castables

    Institute of Scientific and Technical Information of China (English)

    YE Fangbao; M. Rigaud; LIU Xinhong; ZHONG Xiangchong

    2005-01-01

    In this work, the rheological behavior of ultra-low cement alumina-based castables with addition of flake graphite and extruded graphite pellets has been investigated by using IBB rheometer. Emphasis has been laid on the influence of the type and amount of carbon addition on rheological properties of the alumina-based castables and the results are compared with corresponding alumina castable samples without any carbon addition. It is found that alumina-based castables with extruded graphite pellets have good rheological behavior and flowability with lower water demand ( < 6. 3% )and no segregation during the shearing of castable.

  3. Cooperative nucleation modes in polycrystalline CoxPd1-x nanowires

    Science.gov (United States)

    Viqueira, M. S.; Pozo-López, G.; Urreta, S. E.; Condó, A. M.; Cornejo, D. R.; Fabietti, L. M.

    2015-05-01

    Polycrystalline CoxPd1-x (x = 1, 0.60, 0.45, 0.23, and 0.11) cylindrical nanowires (ø = 18-35 nm, about 1 μm length) are produced by AC electrodeposition into hexagonally ordered alumina pores. Single-phase nanowires of an fcc Co-Pd solid solution, with randomly oriented equiaxed grains (7-12 nm) are obtained; in all the cases, the grain size is smaller than the wire diameter. The coercive field and the reduced remanence of Co-rich nanowire arrays are hardly sensitive to temperature within the range varying from 4 K to 300 K. On the other hand, in Pd-rich nanowires both magnitudes are smaller and they largely increase when cooling below 100 K. This behavior also depends on the mean grain size. These facts are systematized considering two main aspects: the non-trivial temperature and composition dependence of the crystalline anisotropy and the saturation magnetostriction in Co-Pd alloys; and a random anisotropy effect, which defines a nucleation localization length that may involve more than a single grain, and thus promotes more cooperative nucleation modes.

  4. Polycrystalline Thin-Film Research: Cadmium Telluride (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2013-06-01

    This National Center for Photovoltaics sheet describes the capabilities of its polycrystalline thin-film research in the area of cadmium telluride. The scope and core competencies and capabilities are discussed.

  5. Polycrystalline Thin-Film Research: Cadmium Telluride (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2011-06-01

    Capabilities fact sheet that includes scope, core competencies and capabilities, and contact/web information for Polycrystalline Thin-Film Research: Cadmium Telluride at the National Center for Photovoltaics.

  6. Polycrystalline silicon semiconducting material by nuclear transmutation doping

    Science.gov (United States)

    Cleland, John W.; Westbrook, Russell D.; Wood, Richard F.; Young, Rosa T.

    1978-01-01

    A NTD semiconductor material comprising polycrystalline silicon having a mean grain size less than 1000 microns and containing phosphorus dispersed uniformly throughout the silicon rather than at the grain boundaries.

  7. Features of the Real Structure of Lanthanum Hexaboride Polycrystalline

    Institute of Scientific and Technical Information of China (English)

    郑树起; 闵光辉; 邹增大; 于普涟; 韩建德; Y. B. Paderno

    2001-01-01

    The microstructure of lanthanum hexaboride (LaB6) polycrystalline has been studied by using transmission electron microscopy. This shows that the ideal LaB6 polycrystalline can be obtained by sintering ingots at the temperature of 2273 K for a holding time of 120min in Ar pressure of 800Torr, where the ingots are formed by pressing LaB6 powder at room temperature at a pressure of 0.4-0.5 GPa. The particles in LaB6 polycrystalline hardly bind; there are only a few pores at the joint parts of three particles and a few impurities exist in some pores. The sintering process for fabricating LaB6 polycrystalline is analysed and the formation of the pore and the impurities are studied from the point of surface tension.

  8. Abnormal hopping conduction in semiconducting polycrystalline graphene

    Science.gov (United States)

    Park, Jeongho; Mitchel, William C.; Elhamri, Said; Grazulis, Larry; Altfeder, Igor

    2013-07-01

    We report the observation of an abnormal carrier transport phenomenon in polycrystalline semiconducting graphene grown by solid carbon source molecular beam epitaxy. At the lowest temperatures in samples with small grain size, the conduction does not obey the two-dimensional Mott-type variable-range hopping (VRH) conduction often reported in semiconducting graphene. The hopping exponent p is found to deviate from the 1/3 value expected for Mott VRH with several samples exhibiting a p=2/5 dependence. We also show that the maximum energy difference between hopping sites is larger than the activation energy for nearest-neighbor hopping, violating the assumptions of the Mott model. The 2/5 dependence more closely agrees with the quasi-one-dimensional VRH model proposed by Fogler, Teber, and Shklovskii (FTS). In the FTS model, conduction occurs by tunneling between neighboring metallic wires. We suggest that metallic edge states and conductive grain boundaries play the role of the metallic wires in the FTS model.

  9. Junction like behavior in polycrystalline diamond films

    Energy Technology Data Exchange (ETDEWEB)

    Bhaskaran, Shivakumar, E-mail: sbhaskar@mail.uh.edu [Department of Electrical and Computer Engineering, Cullen College of Engineering, University of Houston, TX 77004 (United States); Charlson, Earl Joe; Litvinov, Dmitri [Department of Electrical and Computer Engineering, Cullen College of Engineering, University of Houston, TX 77004 (United States); Makarenko, Boris [Department of Chemistry, University of Houston, TX 77004 (United States)

    2012-01-25

    Highlights: Black-Right-Pointing-Pointer The result that we obtained are compared with single crystalline diamond devices. Black-Right-Pointing-Pointer The barrier height of 4.4 eV matches the ideal pn-junction barrier height of diamond thin film. - Abstract: We have successfully fabricated polycrystalline diamond rectifying junction devices on n-type (1 0 0) silicon substrates by Hot Filament Chemical Vapor Deposition (HFCVD) using methane/hydrogen process gas and trimethyl borate and trimethyl phosphite dissolved in acetone as p- and n-type dopants, respectively. Impedance spectroscopy and current-voltage analysis indicates that the conduction is vertical down the grains and facets and not due to surface effects. Electrical characteristics were analyzed with In and Ti/Au top metal contacts with Al as the substrate contact. Current-voltage characteristics as a function of temperature showed barrier potentials of 1.1 eV and 0.77 eV for the In and Ti/Au contacts, respectively. Barrier heights of 4.8 eV (In) and 4.4 eV (Ti/Au) were obtained from capacitance-voltage measurements.

  10. Polishing of dental porcelain by polycrystalline diamond.

    Science.gov (United States)

    Nakamura, Yoshiharu; Sato, Hideaki; Ohtsuka, Masaki; Hojo, Satoru

    2010-01-01

    Polycrystalline diamond (PCD) exhibits excellent abrasive characteristics and is commonly used as loose grains for precision machining of hard ceramics and other materials that are difficult to grind and polish. In the present study, we investigated using bonded PCD for polishing dental porcelain, for which a lustrous surface is difficult to obtain by polishing. We compared the surface texture and characteristics of dental porcelain after polishing with bonded PCD with that obtained using bonded monocrystalline diamond (MCD), which is commonly used for this purpose. Polishing was performed at various pressures and rotational speeds on a custom-built polishing apparatus using bonded PCD or MCD with grain sizes of 3.92 μm on specimens consisting of VITA Omega 900 dentin porcelain after firing and then glazing to a specified surface roughness. The surface roughness of the polished porcelain and the abrasion quantity in terms of its polishing depth were measured, and its surface texture and characteristics were investigated. At low polishing pressures, PCD yielded a finer polished surface than MCD. The polishing depth after polishing for 20-30 min was approximately 2-3 μm with PCD and 1-2 μm with MCD. The polished surface was more uniform and smooth with PCD than with MCD.

  11. Water vapor interactions with polycrystalline titanium surfaces

    Science.gov (United States)

    Azoulay, A.; Shamir, N.; Volterra, V.; Mintz, M. H.

    1999-02-01

    The initial interactions of water vapor with polycrystalline titanium surfaces were studied at room temperature. Measurements of water vapor surface accumulation were performed in a combined surface analysis system incorporating direct recoils spectrometry (DRS), Auger electron spectroscopy and X-ray photoelectron spectroscopy. The kinetics of accommodation of the water dissociation fragments (H, O and OH) displayed a complex behavior depending not only on the exposure dose but also on the exposure pressure. For a given exposure dose the efficiency of chemisorption increased with increasing exposure pressure. DRS measurements indicated the occurrence of clustered hydroxyl moieties with tilted O-H bonds formed even at very low surface coverage. A model which assumes two parallel routes of chemisorption, by direct collisions (Langmuir type) and by a precursor state is proposed to account for the observed behavior. The oxidation efficiency of water seemed to be much lower than that of oxygen. No Ti 4+ states were detected even at high water exposure values. It is likely that hydroxyl species play an important role in the reduced oxidation efficiency of water.

  12. Deformation localization and cyclic strength in polycrystalline molybdenum

    Energy Technology Data Exchange (ETDEWEB)

    Sidorov, O.T.; Rakshin, A.F.; Fenyuk, M.I.

    1983-06-01

    Conditions of deformation localization and its interrelation with cyclic strength in polycrystalline molybdenum were investigated. A fatigue failure of polycrystalline molybdenum after rolling and in an embrittled state reached by recrystallization annealing under cyclic bending at room temperature takes place under nonuniform distribution of microplastic strain resulting in a temperature rise in separate sections of more than 314 K. More intensive structural changes take place in molybdenum after rolling than in recrystallized state.

  13. NMR Revealed Activated Alumina-Water Interaction

    Institute of Scientific and Technical Information of China (English)

    ZHOU Rui; ZHOU Yan; HU Kai; JI Zhen-ping; CHENG Gong-zhen

    2005-01-01

    Three different spin-lattice relaxation times (T1) of water were obtained in activated alumina-water slurry system, which indicate that there exist three states of water: bound water, pore water and bulk water. The chemical shift (δH) decreases as the amount of water added to the system increases due to the differences in contribution of these three states of water in the samples. The δH value for adsorbed water decreases nearly linearly and T1 increases with elevating temperature, which result from the decrease in the content of bound water by the increase in thermal motion.

  14. Anisotropic shrinkage characteristics of tape cast alumina

    Science.gov (United States)

    Patwardhan, Jaideep Suresh

    Dimensional control during sintering is a major issue in ceramics processing to avoid high post-sintering costs associated with machining of the fired ceramic part to desired tolerances and dimensions. Ceramic forming processes such as tape casting, injection molding, and extrusion involve shear of anisotropic particles resulting in preferential alignment of the particles in the green body. This preferential alignment causes directionality in mechanical, electrical, optical, and magnetic properties and most importantly warpage or distortion during sintering. A large effort has been devoted to synthesizing ceramic green bodies with minimal density gradients and uniform packing and modeling the sintering behavior evolution but little effort has been devoted to characterizing orientation of particles and the effect of preferential alignment on sintering shrinkage anisotropy. A systematic study was initiated to study the effect of processing variables such as shear rate, solids loading, temperature, and binder content on aqueous tape cast alumina. Three different alumina systems: A16-SG, Baikowski RC-UFX DBM and RC-LS DBM were investigated. Aqueous tapes of high solids loading alumina (56 vol. %) were tape cast at various speeds and thicknesses and assuming plane Couette flow a shear rate regime of 21--270 s-1 was investigated. Higher shear rates and high solids loading resulted in higher in-plane anisotropy whereas the anisotropy in the thickness direction was higher for low solids loading systems. The anisotropy was found to be fairly constant above a certain critical shear rate (˜100 s-1) irrespective of the temperature and the solids loading and this correlated with the viscosity-shear rate relationship of the cast slips. The higher shrinkage anisotropy in the thickness direction for the low solids loading systems (35 and 45 vol. %) was attributed to the higher amount of organics in the slip required to sustain the suitable viscosity for tape casting and

  15. Nanotube Arrays in Porous Anodic Alumina Membranes

    Institute of Scientific and Technical Information of China (English)

    Liang LI; Naoto KOSHIZAKI; Guanghai LI

    2008-01-01

    This review summarizes the various techniques developed for fabricating nanotube arrays in porous anodic alumina membranes (AAMs). After a brief introduction to the fabrication process of AAMs, taking carbons, metals, semiconductors, organics, biomoleculars, and heterojunctions as typical examples, attention will be focused on the recently established methods to fabricate nanotubes in AAM, including electrochemical deposition, surface sol-gel, modified chemical vapor deposition, atomic layer deposition, and layer-by-layer growth. Every method is demonstrated by one or two reported results. Finally, this review is concluded with some perspectives on the research directions and focuses on the AAM-based nanotubes fields.

  16. Intercalation of water into lithium. beta. -alumina

    Energy Technology Data Exchange (ETDEWEB)

    Dudney, N J; Bates, J B; Wang, J C; Brown, G M; Larson, B C; Engstrom, H

    1981-01-01

    Infrared absorption, neutron diffraction and weight loss techniques have been used to investigate the hydration of single crystals of Li ..beta..-alumina. The hydration is a reversible intercalation reaction. Up to approximately two water molecules per formula unit can penetrate the conduction plane. Other protonated species are formed from the dissociation of the molecular water. The rate of hydration is controlled by the diffusion of water in the conduction plane. A likely diffusion mechanism requires dissociation of the water and an interstitialcy motion of the oxygen.

  17. Oxygen Permeability and Grain-Boundary Diffusion Applied to Alumina Scales

    Science.gov (United States)

    Smialek, James L.; Jacobson, Nathan S.; Gleeson, Brian; Hovis, David B.; Heuer, Arthur H.

    2013-01-01

    High-temperature oxygen permeability measurements had determined grain-boundary diffusivities (deltaD(sub gb)) in bulk polycrystalline alumina (Wada, Matsudaira, and Kitaoka). They predict that oxygen deltaD(sub gb,O) varies with oxygen pressure as P(O2)(sup -1/6) at low pressure whereas aluminum deltaD(sub gb),Al varies with P(O2)(sup +3/16) at high pressure. These relations were used to evaluate alumina scale growth in terms of diffusivity and grain size. A modified Wagner treatment for dominant inward oxygen growth produces the concise solution: ?(sub i) = k(sub p,i)×G(sub i) = 12 deltaD(sub gb,O,int), where ?(sub i) is a constant and k(sub p,i) and G(sub i) refer to instantaneous values of the scale parabolic growth constant and grain size, respectively. A commercial FeCrAl(Zr) alloy was oxidized at 1100 to 1400 degC to determine k(sub p,i), interfacial grain size, ?, and thus deltaD(sub gb,O,int). The deltaD(sub gb,O,int) values predicted from oxidation at (375 kJ/mole) were about 20 times less than those obtained above (at 298 kJ/mole), but closer than extrapolations from high-temperature bulk measurements. The experimental oxidation results agree with similar FeCrAl(X) studies, especially where both k(sub p,i) and G(sub i) were characterized. This complete approach accounts for temperature-sensitive oxidation effects of grain enlargement, equilibrium interface pressure variation, and grain-boundary diffusivity.

  18. 21 CFR 73.1010 - Alumina (dried aluminum hydroxide).

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Alumina (dried aluminum hydroxide). 73.1010 Section 73.1010 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL LISTING OF COLOR ADDITIVES EXEMPT FROM CERTIFICATION Drugs § 73.1010 Alumina (dried...

  19. Textural stability of titania–alumina composite membranes

    NARCIS (Netherlands)

    Kumar, Krishnankutty-Nair P.; Keizer, Klaas; Burggraaf, Anthonie J.

    1993-01-01

    Textural evolution (porosity reduction, pore and crystallite growth) in titania–alumina composite membranes has been studied using thermal analysis, X-ray diffraction, field emission scanning electron microscopy and N2 physisorption techniques. The presence of alumina in the membranes improved the t

  20. Chemical modification/grafting of mesoporous alumina with polydimethylsiloxane (PDMS)

    NARCIS (Netherlands)

    Pinheiro de Melo, A.F.; Nijmeijer, A.; Sripathi, V.G.P.; Winnubst, A.J.A.

    2015-01-01

    A method for polydimethylsiloxane grafting of alumina powders is described which involves chemical modification of the surface of mesoporous (5 nm) γ-alumina flakes with a linker (3-aminopropyltriethoxysilane: APTES), either by a solution phase (SPD) or a vapour phase (VPD) reaction, followed by PDM

  1. Chemical modification/grafting of mesoporous alumina with polydimethylsiloxane (PDMS)

    NARCIS (Netherlands)

    Pinheiro de Melo, A.F.; Nijmeijer, Arian; Sripathi, V.G.P.; Winnubst, Aloysius J.A.

    2015-01-01

    A method for polydimethylsiloxane grafting of alumina powders is described which involves chemical modification of the surface of mesoporous (5 nm) γ-alumina flakes with a linker (3-aminopropyltriethoxysilane: APTES), either by a solution phase (SPD) or a vapour phase (VPD) reaction, followed by

  2. Development of Reproducing Alumina-Magnesia-Carbon Bricks

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The reproducing alumina-magnesia-carbon bricks were prepared with the dumped bricks as starting materials. The bulk density, apparent porosity, crushing strength, modolus of rupture and slag resistance of the specimen were analyzed. The results show that the used refractories can be reused and recycled by the right method. The reproducing alumina-magnesia-carbon bricks with better abilities were prepared.

  3. 40 CFR 721.10120 - Siloxane modified alumina nanoparticles (generic).

    Science.gov (United States)

    2010-07-01

    ... nanoparticles (generic). 721.10120 Section 721.10120 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.10120 Siloxane modified alumina nanoparticles (generic). (a) Chemical... as siloxane modified alumina nanoparticles (PMN P-05-687) is subject to reporting under this...

  4. Dynamic compressive and tensile strengths of spark plasma sintered alumina

    Science.gov (United States)

    Girlitsky, I.; Zaretsky, E.; Kalabukhov, S.; Dariel, M. P.; Frage, N.

    2014-06-01

    Fully dense submicron grain size alumina samples were manufactured from alumina nano-powder using Spark Plasma Sintering and tested in two kinds of VISAR-instrumented planar impact tests. In the first kind, samples were loaded by 1-mm tungsten impactors, accelerated to a velocity of about 1 km/s. These tests were aimed at studying the Hugoniot elastic limit (HEL) of Spark Plasma Sintering (SPS)-processed alumina and the decay, with propagation distance, of the elastic precursor wave. In the tests of the second kind, alumina samples of 3-mm thickness were loaded by 1-mm copper impactors accelerated to 100-1000 m/s. These tests were aimed at studying the dynamic tensile (spall) strength of the alumina specimens. The tensile fracture of the un-alloyed alumina shows a monotonic decline of the spall strength with the amplitude of the loading stress pulse. Analysis of the decay of the elastic precursor wave allowed determining the rate of the irreversible (inelastic) strains in the SPS-processed alumina at the initial stages of the shock-induced inelastic deformation and to clarify the mechanisms responsible for the deformation. The 1-% addition of Cr2O3 decreases the HEL of the SPS-processed alumina by 5-% and its spall strength by 50% but barely affects its static properties.

  5. Thermal Conductivity of Alumina-reinforced Zirconia Composites

    Science.gov (United States)

    Bansal, Narottam P.

    2005-01-01

    10-mol% yttria-stabilized zirconia (10SZ) - alumina composites containing 0-30 mol% alumina were fabricated by hot pressing at 1500 C in vacuum. Thermal conductivity was determined at various temperatures using a steady-state laser heat flux technique. Thermal conductivity of the composites increased with increase in alumina content. Composites containing 0, 5, and 10-mol% alumina did not show any change in thermal conductivity with temperature. However, those containing 20 and 30-mol% alumina showed a decrease in thermal conductivity with increase in temperature. The measured values of thermal conductivity were in good agreement with those calculated from the Maxwell-Eucken model where one phase is uniformly dispersed within a second major continuous phase.

  6. Thermal shock behavior of rare earth modified alumina ceramic composites

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Junlong; Liu, Changxia [Ludong Univ., Yantai (China). School of Transportation

    2017-05-15

    Alumina matrix ceramic composites toughened by AlTiC master alloys, diopside and rare earths were fabricated by hot-pressing and their thermal shock behavior was investigated and compared with that of monolithic alumina. Results showed that the critical thermal shock temperature (ΔT) of monolithic alumina was 400 C. However, it decreased to 300 C for alumina incorporating only AlTiC master alloys, and increased with further addition of diopside and rare earths. Improvement of thermal shock resistance was obtained for alumina ceramic composites containing 9.5 wt.% AlTiC master alloys and 0.5 wt.% rare earth additions, which was mainly attributed to the formation of elongated grains in the composites.

  7. Comparison of deep desulfurization methods in alumina production process

    Institute of Scientific and Technical Information of China (English)

    刘战伟; 李旺兴; 马文会; 尹中林; 武国宝

    2015-01-01

    Several methods of deep desulfurization in alumina production process were studied, and the costs of these methods were compared. It is found that most of the S2− in sodium aluminate solution can be removed by adding sodium nitrate or hydrogen peroxide in digestion process, and in this way the effect of S2− on alumina product quality is eliminated. However, the removal efficiency of2-23SOin sodium aluminate solution is very low by this method. Both S2− and2-23SO in sodium aluminate solution can be removed completely by wet oxidation method in digestion process. The cost of desulfurization by wet oxidation is lower than by adding sodium nitrate or hydrogen peroxide. The results of this research reveal that wet oxidation is an economical and feasible method for the removal of sulfur in alumina production process to improve alumina quality, and provide valuable guidelines for alumina production by high-sulfur bauxite.

  8. Morphology and transmittance of porous alumina on glass substrate

    Energy Technology Data Exchange (ETDEWEB)

    Guo Peitao, E-mail: guopeitao@hotmail.com [Wuhan University of Technology. Wuhan (China); Xia Zhilin [Wuhan University of Technology. Wuhan (China); Key Laboratory of Low Dimensional Materials and Application Technology, Xiangtan University, Ministry of Education, Xiangtan (China); Xue Yiyu [Wuhan University of Technology. Wuhan (China); Huang Caihua [China Three Gorges University, Yichang (China); Zhao Lixin [Wuhan University of Technology. Wuhan (China)

    2011-02-01

    The porous optical film has higher threshold of laser-induced damage than densified films, for the study of mechanism of laser-induced damage of porous optical film with ordered pore structure. Porous anodic alumina (PAA) film with high transmittance on glass substrate has been prepared. Aluminum film was deposited on glass substrate by means of resistance and electron beam heat (EBH) evaporation. Porous alumina was prepared in oxalic acid solution under different anodizing conditions. At normal incidence, the optical transmittance spectrum over 300-1000 nm spectra region was obtained by spectrophotometer. SEM was introduced to analysis the morphology of the porous alumina film. The pore aperture increased with the increase of anodizing voltage, which resulted in a rapid decrease of the pore concentration and the optical thickness of porous alumina film. Damage morphology of porous alumina film is found to be typically defects initiated, and the defect is the pore presented on the film.

  9. Thermal Shock Behaviour of Alumina-Iron Composites

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Thermal shock behaviour was investigated for two morphologically different composites comprising an alumina matrix and 20 vol. pct Fe particles for a wide range of quenching temperature differences (△T=100~800°C) and compared to a monolithic alumina. The retained strength and critical quenching temperature difference, △Tc, of the two composites were a significant improvement over the values for the respective monolithic alumina. Crack lengths and densities were shown to be greater for the alumina than for the two composites at all quenching temperature differences. The thermal shock resistance parameters for monolithic alumina and the two composites were calculated according to their mechanical and physical properties. The calculated results agree well with the experimental one and indicate possible explanations for the differences in thermal shock behaviour.

  10. Catalytic cleavage of lignin β-O-4 link mimics using copper on alumina and magnesia-alumina

    NARCIS (Netherlands)

    Strassberger, Z.; Alberts, A.H.; Louwerse, M.J.; Tanase, S.; Rothenberg, G.

    2013-01-01

    Copper on γ-alumina and on mixed magnesia-alumina, Cu/MgO-Al2O3, catalyse the hydrodeoxygenation (HDO) of β-O-4 lignin-type dimers, giving valuable aromatics. The typical selectivity to phenol is as high as 20%. By changing the support's acidity we can modify the dispersion of copper. Interestingly,

  11. Properties of Transition Metal Doped Alumina

    Science.gov (United States)

    Nykwest, Erik; Limmer, Krista; Brennan, Ray; Blair, Victoria; Ramprasad, Rampi

    Crystallographic texture can have profound effects on the properties of a material. One method of texturing is through the application of an external magnetic field during processing. While this method works with highly magnetic systems, doping is required to couple non-magnetic systems with the external field. Experiments have shown that low concentrations of rare earth (RE) dopants in alumina powders have enabled this kind of texturing. The magnetic properties of RE elements are directly related to their f orbital, which can have as many as 7 unpaired electrons. Since d-block elements can have as many as 5 unpaired electrons the effects of substitutional doping of 3d transition metals (TM) for Al in alpha (stable) and theta (metastable) alumina on the local structure and magnetic properties, in addition to the energetic cost, have been calculated by performing first-principles calculations based on density functional theory. This study has led to the development of general guidelines for the magnetic moment distribution at and around the dopant atom, and the dependence of this distribution on the dopant atom type and its coordination environment. It is anticipated that these findings can aid in the selection of suitable dopants help to guide parallel experimental efforts. This project was supported in part by an internship at the Army Research Laboratory, administered by the Oak Ridge Institute for Science and Education, along with a grant of computer time from the DoD High Performance Computing Modernization Program.

  12. Modified-starch Consolidation of Alumina Ceramics

    Institute of Scientific and Technical Information of China (English)

    JU Chenhui; WANG Yanmin; YE Jiandong; HUANG Yun

    2008-01-01

    The alumina ceramics with the homogeneous microstructure and the higher density were fabricated via the modified-starch consolidation process by 1.0 wt%of a modified starch as a consolidator/binder.The swelling behavior of the modified oxidized tapioca starch was analyzed by optical microscope,and two other corn starches(common corn starch and high amylose COrn starch)were also analyzed for comparison.The modified starch used as a binder for the consolidation swelled at about 55℃.began to gelatinize at 65℃ and then was completely gelatinized at 75℃.But the corn starches could not be completely gelatinized even at 80℃for 1 h.The high-strength green bodies(10.6 MPa)with the complex shapes were produced.The green bodies were sintered without any binder burnout procedure at 1700℃and a relative density of 95.3% was obtained for the sintered bodies,which is similar to that of the sintered sample formed by conventional slip casting.In addition,the effect of temperature on the apparent viscosity of the starch/alumina slurry in the process was investigated,and the corresponding mechanism for the starch consolidation was discussed.

  13. Vacuum arc on the polycrystalline silica cathode

    Directory of Open Access Journals (Sweden)

    D. V. Duhopel'nikov

    2014-01-01

    Full Text Available Thin films of silica and its compounds are used in modern technology to produce Li-ion batteries, wear-resistant and protective coatings, thin-films insulators, etc. This coating is produced with CVD methods, with magnetron sputtering systems or with electron-beam evaporation. The vacuum arc evaporation method, presently, is not used.The paper demonstrates a possibility for a long-term operation of vacuum arc evaporator with polycrystalline silica-aluminum alloy (90% of silica cathode and with magnetic system to create a variable form of arch-like magnetic field on the cathode surface. It was shown that archlike configuration of magnetic field provides a stable discharge and uniform cathode spots moving with the velocities up to 5 m/s with magnetic fields induction about 10 mT. Thus, there is no local melting of the cathode, and this provides its long-term work without chips, cracks and destruction. Cathodes spots move over the cathode surface leaving t big craters with melted edges on its surface. The craters size was 150-450μm. The cathode spot movement character and the craters on the cathode surface were like the spots movement, when working on the copper or aluminum cathodes. With the magnetic field induction less than 1 mT, the cathode spots movement was the same as that of on the silica mono-crystal without magnetic field. Thus, the discharge volt-ampere characteristics for different values of magnetic fields were obtained. Voltampere characteristics were increasing and were shifted to the higher voltage with increasing magnetic field. The voltage was 18.7-26.5 V for the arc current 30-140 A.So, it was confirmed that vacuum arc evaporation method could be used for effective evaporation of silica and silica-based alloys and for thin films deposition of this materials.

  14. A New Polycrystalline Co-Ni Superalloy

    Science.gov (United States)

    Knop, M.; Mulvey, P.; Ismail, F.; Radecka, A.; Rahman, K. M.; Lindley, T. C.; Shollock, B. A.; Hardy, M. C.; Moody, M. P.; Martin, T. L.; Bagot, P. A. J.; Dye, D.

    2014-12-01

    In 2006, a new-ordered L12 phase, Co3(Al,W), was discovered that can form coherently in a face-centered cubic (fcc) A1 Co matrix. Since then, a community has developed that is attempting to take these alloys forward into practical applications in gas turbines. A new candidate polycrystalline Co-Ni γ/ γ' superalloy, V208C, is presented that has the nominal composition 36Co-35Ni-15Cr-10Al-3W-1Ta (at.%). The alloy was produced by conventional powder metallurgy superalloy methods. After forging, a γ' fraction of ~56% and a secondary γ' size of 88 nm were obtained, with a grain size of 2.5 μm. The solvus temperature was 1000°C. The density was found to be 8.52 g cm-3, which is similar to existing Ni alloys with this level of γ'. The alloy showed the flow stress anomaly and a yield strength of 920 MPa at room temperature and 820 MPa at 800°C, similar to that of Mar-M247. These values are significantly higher than those found for either conventional solution and carbide-strengthened Co alloys or the γ/ γ' Co superalloys presented in the literature thus far. The oxidation resistance, with a mass gain of 0.08 mg cm-2 in 100 h at 800°C, is also comparable with that of existing high-temperature Ni superalloys. These results suggest that Co-based and Co-Ni superalloys may hold some promise for the future in gas turbine applications.

  15. Cyclic Deformation of Copper and Copper-Alumina Polycrystals

    DEFF Research Database (Denmark)

    Brøndsted, Povl; Bilde-Sørensen, Jørgen; Pedersen, Ole Bøcker

    1983-01-01

    Preliminary results are described of a study of the combined effects of polycrystallinity and non-shearable Al//2O//3 particles on the fatigue of Cu at constant plastic strain amplitudes. The rapid hardening stage was found to be strongly affected both by polycrystallinity and by the particles. E...

  16. Parsing abnormal grain growth in specialty aluminas

    Science.gov (United States)

    Lawrence, Abigail Kremer

    Grain growth in alumina is strongly affected by the impurities present in the material. Certain impurity elements are known to have characteristic effects on abnormal grain growth in alumina. Specialty alumina powders contain multiple impurity species including MgO, CaO, SiO2, and Na 2O. In this work, sintered samples made from alumina powders containing various amounts of the impurities in question were characterized by their grain size and aspect ratio distributions. Multiple quantitative methods were used to characterize and classify samples with varying microstructures. The grain size distributions were used to partition the grain size population into subpopulations depending on the observed deviation from normal behavior. Using both grain size and aspect ratio a new visual representation for a microstructure was introduced called a morphology frequency map that gives a fingerprint for the material. The number of subpopulations within a sample and the shape of the distribution on the morphology map provided the basis for a classification scheme for different types of microstructures. Also using the two parameters a series of five metrics were calculated that describe the character of the abnormal grains in the sample, these were called abnormal character values. The abnormal character values describe the fraction of grains that are considered abnormal, the average magnitude of abnormality (including both grain size and aspect ratio), the average size, and variance in size. The final metric is the correlation between grain size and aspect ratio for the entire population of grains. The abnormal character values give a sense of how different from "normal" the sample is, given the assumption that a normal sample has a lognormal distribution of grain size and a Gaussian distribution of aspect ratios. In the second part of the work the quantified measures of abnormality were correlated with processing parameters such as composition and heat treatment conditions. A

  17. Fabrication of Alumina Nanowires from Porous Alumina Membranes by Etching in Phosphoric Acid Solution

    Science.gov (United States)

    Wang, Xuehua; Li, Chengyong; Ma, Lianjiao; Cao, Hong; Zhang, Baohua

    Alumina nanowires (ANWs) with high aspect ratios were synthesized by the chemical etching of porous alumina membranes (PAMs) in phosphoric acid solution. The morphology and structure of ANWs were analyzed by SEM and XRD, respectively. The results showed that the typical features of ANWs are around 35 nm in diameter and around 20 μm in length, the crystalline structure of the ANWs was amorphous, which was in accordance with that of the PAMs. Furthermore, the morphology of the PAMs was characterized by AFM and SEM in detail. On the basis of AFM and SEM observations, a possible formation mechanism of ANWs was discussed, and the inhomogeneous of the dissolution between the triple points and the side walls was considered to be the essential factor deciding the formation of ANWs.

  18. Terbium luminescence in alumina xerogel fabricated in porous anodic alumina matrix under various excitation conditions

    Energy Technology Data Exchange (ETDEWEB)

    Gaponenko, N. V., E-mail: nik@nano.bsuir.edu.by [Belarusian State University of Informatics and Radioelectronics (Belarus); Kortov, V. S. [Yeltsin Ural Federal University (Russian Federation); Orekhovskaya, T. I.; Nikolaenko, I. A. [Belarusian State University of Informatics and Radioelectronics (Belarus); Pustovarov, V. A.; Zvonarev, S. V.; Slesarev, A. I. [Yeltsin Ural Federal University (Russian Federation); Prislopski, S. Ya. [National Academy of Sciences of Belarus, Stepanov Institute of Physics (Belarus)

    2011-07-15

    Terbium-doped alumina xerogel layers are synthesized by the sol-gel method in pores of a porous anodic alumina film 1 {mu}m thick with a pore diameter of 150-180 nm; the film is grown on a silicon substrate. The fabricated structures exhibit terbium photoluminescence with bands typical of trivalent terbium terms. Terbium X-ray luminescence with the most intense band at 542 nm is observed for the first time for such a structure. Morphological analysis of the structure by scanning electron microscopy shows the presence of xerogel clusters in pore channels, while the main pore volume remains unfilled and pore mouths remain open. The data obtained confirm the promising applications of fabricated structures for developing matrix converters of X-rays and other ionizing radiations into visible light. The possibilities of increasing luminescence intensity in the matrix converter are discussed.

  19. Microstructural evolution of alumina-zirconia nanocomposites; Evolucao microestrutural de nanocompositos alumina-zirconia

    Energy Technology Data Exchange (ETDEWEB)

    Ojaimi, C.L.; Chinelatto, A.S.A.; Chinelatto, A.L. [Universidade Estadual de Ponta Grossa (UEPG), PR (Brazil); Pallone, E.M.J.A., E-mail: christianelago@yahoo.com.br [Universidade de Sao Paulo (USP), Pirassununga, Sao Paulo, SP (Brazil). Faculdade de Zootecnia e Engenharia de Alimentos

    2012-07-01

    Ceramic materials have limited use due to their brittleness. The inclusion of nanosized particles in a ceramic matrix, which are called nanocomposites, and ceramic processing control by controlling the grain size and densification can aid in obtaining ceramic products of greater strength and toughness. Studies showed that the zirconia nano inclusions in the matrix of alumina favors an increase in mechanical properties by inhibiting the grain growth of the matrix and not by the mechanism of the transformation toughening phase of zirconia. In this work, the microstructural evolution of alumina nanocomposites containing 15% by volume of nanometric zirconia was studied. From the results it was possible to understand the sintering process of these nanocomposites. (author)

  20. Deformation Behaviour of Coarse Grain Alumina under Shock Loading

    Science.gov (United States)

    Gupta, Satish

    2013-06-01

    To develop better understanding of the shock wave induced deformation behavior of coarse grain alumina ceramics, and for measurement of its Hugoniot Elastic Limit (HEL), in-situ and recovery gas gun experiments have been carried out on coarse grain alumina (grain size ~ 10 μm), prepared in the form of discs (>99.9% TMD) by pressure-less sintering of alpha alumina powder at 1583 K. The HEL value of 1.9 GPa has been determined from the kink in the pressure history recorded using piezoresistance gauge and also from the free surface velocity history of the sample shocked to 9 GPa. The nano-indentation measurements on the alumina samples shocked to 6.5 GPa showed hardness value 15% lower than 21.3 GPa for unshocked alumina, and strong Indentation Size Effect (ISE); the hardness value was still lower and the ISE was stronger for the sample shocked to 12 GPa. The XRD measurements showed reduced particle size and increased microstrains in the shocked alumina fragments. SEM, FESEM and TEM measurements on shock treated samples showed presence of grain localized micro- and nano-scale deformations, micro-cleavages, grain-boundary microcracks, extensive shear induced deformations, and localized micro-fractures, etc. These observations led to the development of a qualitative model for the damage initiation and its subsequent growth mechanisms in shocked alumina. The work performed in collaboration with K.D. Joshi of BARC and A.K. Mukhopadhyay of CGCRI.

  1. Dissolution kinetics for alumina in cryolite melts. Distribution of alumina in the electrolyte of industrial aluminium cells

    Energy Technology Data Exchange (ETDEWEB)

    Kobbeltvedt, Ove

    1997-12-31

    This thesis contributes to the understanding of which factors determine the rate of dissolution of alumina added to the bath in alumina reduction cells. Knowing this may help reduce the occurrences of operation interruptions and thus make it possible to produce aluminium using less energy. When alumina powder was added to a stirred cryolite melt, the alumina dissolved in two distinct main stages. In the first stage, the dissolution rate was very high, which reflects dissolution of single alumina grains that are being dispersed in the bath upon addition. In the second stage, lumps of alumina infiltrated with bath dissolved at a rate considerably slower than that of the first stage. The formation of these alumina agglomerates is the most important contributor to slow dissolution. The parameters varied in the experiments were convection, batch size, and temperature of the bath and of the added alumina. Increased gas stirring of the bath speeded up dissolution in both stages but the size of the batch was of little significance. Increasing the bath temperature had no effect in the first stage but speeded up dissolution considerably in the second stage. Compared to adding alumina at room temperature, preheating it to a high temperature (600 {sup o}C) increased the dissolution rate in the first stage while preheating to lower temperatures (100-300 {sup o}C) decreased the dissolution rate. In the second stage, preheating slowed the dissolution. The two latter phenomena of reduced dissolution rates are ascribed to the removal of moisture from the alumina upon preheating. The bath flow and the distribution of alumina in the bath were measured in four different types of cells. It was found that if a certain asymmetry of the magnetic field traverse to the cell was present, due to the presence of risers, then loops of high velocity bath flow occurred near the short ends of the cell. Thus, alumina added near the short ends is effectively transferred away from the feeding

  2. The electrical conductivity of polycrystalline metallic films

    Science.gov (United States)

    Moraga, Luis; Arenas, Claudio; Henriquez, Ricardo; Bravo, Sergio; Solis, Basilio

    2016-10-01

    We calculate the electrical conductivity of polycrystalline metallic films by means of a semi-numerical procedure that provides solutions of the Boltzmann transport equation, that are essentially exact, by summing over classical trajectories according to Chambers' method. Following Mayadas and Shatzkes (MS), grain boundaries are modeled as an array of parallel plane barriers situated perpendicularly to the direction of the current. Alternatively, according to Szczyrbowski and Schmalzbauer (SS), the model consists in a triple array of these barriers in mutual perpendicular directions. The effects of surface roughness are described by means of Fuchs' specularity parameters. Following SS, the scattering properties of grain boundaries are taken into account by means of another specularity parameter and a probability of coherent passage. The difference between the sum of these and one is the probability of diffuse scattering. When this formalism is compared with the approximate formula of Mayadas and Shatzkes (Phys. Rev. B 1, 103 (1986)) it is shown that the latter greatly overestimates the film resistivity over most values of the reflectivity of the grain boundaries. The dependence of the conductivity of thin films on the probability of coherent passage and grain diameters is examined. In accordance with MS we find that the effects of disorder in the distribution of grain diameters is quite small. Moreover, we find that it is not safe to neglect the effects of the scattering by the additional interfaces created by stacked grains. However, when compared with recent resitivity-thickness data, it is shown that all three formalisms can provide accurate fits to experiment. In addition, it is shown that, depending on the respective reflectivities and distance from a surface, some of these interfaces may increase or diminish considerably the conductivity of the sample. As an illustration of this effect, we show a tentative fit of resistivity data of gold films measured by

  3. Ballistic Performance of Alumina and Zirconia-toughened Alumina Against 7.62 Armour Piercing Projectile

    Directory of Open Access Journals (Sweden)

    S G. Savio

    2014-09-01

    Full Text Available A study was carried out to compare the ballistic performance of high purity alumina and zirconia-toughened alumina (ZTA using depth of penetration (DoP test configuration against 7.62 mm armour piercing (AP ammunition. The effect of tile thickness on the differential efficiency factor (DEF was studied for tile thickness in the range of 3 mm to 6 mm for alumina tiles and 3 mm to 5 mm for ZTA tiles. The DEF is found to increase as tile thickness increases. An analysis on the failed shots showed that the residual shot weight does not follow a single linear relationship with ceramic tile thickness unlike the residual DoP for all thicknesses of tiles. Post-ballistic analysis on ceramic powder for particle size distribution was carried out and the results are presented.Defence Science Journal, Vol. 64, No. 5, September 2014, pp.477-483, DOI:http://dx.doi.org/10.14429/dsj.64.6745

  4. ISEC-3: Results from the third in-situ electrical conductivity test on polycrystaline alumina

    Energy Technology Data Exchange (ETDEWEB)

    Snead, L.L.; White, D.P.; Eatherly, W.S.; Zinkle, S.J. [Oak Ridge National Lab., TN (United States)

    1996-04-01

    An experimental investigation of radiation induced electrical degradation (RIED) has been performed at the High Flux Beam Reactor (HFBR) at Brookhaven National Laboratory. In this study (the third in a series of experiments at the HFBR) the effects of neutron irradiation on the electrical conductivity of Wesgo AL995 polycrystalline alumina has been investigated at approximately 450{degrees}C. The capsule design used in this study is very similiar to a design used in the first two experiments in this series with some improvements made to a design used in the first two experiments in this series with some improvements made in the cable terminations. A guard ring configuration was used on the disk shaped sample. Triaxial mineral insulated cable was used as the data lead from the sputter deposited guard ring and central electrode of the sample, and coaxial mineral insulated cable was used as the sample power lead. No evidence for REID was observed in this series of experiments to a dose level of {approx}1.8 dpa. The effect of neutron irradiation on the electrical properties of two mineral insulated (MgO) cables was also investigated.

  5. Design and fabrication of alumina micro reciprocating engine

    Institute of Scientific and Technical Information of China (English)

    JIN Peng; GAO Yu-long; LIU Nan; JIANG Kylie

    2008-01-01

    Microengines are regarded as the potential replacements for batteries. Aimed at the unsatisfactory thermal property of silicon used in the combustion chambers, ceramics are chosen as the construction material in this paper. The fabrication process where alumina has been chosen as the microengine material is discussed. Vigorous FEA has been carried out, and it is found that the material satisfies the stress and deformation require-ments of the design. Then the alumina fabrication process is described. Soft reusable polydimethylsiloxane (PDMS) moulds are produced from SU-8 resist masters, and alumina microengine parts are produced using the PDMS moulds. Images of the ceramic components show that the fabrication satisfies the design requirements.

  6. Processing of silicon nitride and alumina nanosize powders

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez, E.J.; Piermarini, G.; Hockey, B.; Malghan, S.G. [National Inst. of Standard and Technology, Gaithersburg, MD (United States)

    1995-08-01

    The effects of pressure on the compaction and subsequent processing of nanosize {gamma} alumina powders were studied. A 3 mm diameter piston/cylinder die was used to compact the nanosize powders to pressures of 1 and 2.5 GPa. The green bodies were sintered at temperatures up to 1600{degrees}C. Results show that green body density can be increased by higher compaction pressures. It appears that as a result of the {gamma}-to-{alpha} transformation in alumina, higher green density does not necessarily produce a higher density sintered alumina body. The microstructures of the sintered bodies are described in terms of porosity and phase content.

  7. Alumina Paste Sublimation Suppression Barrier for Thermoelectric Device

    Science.gov (United States)

    Paik, Jong-Ah (Inventor); Caillat, Thierry (Inventor)

    2014-01-01

    Alumina as a sublimation suppression barrier for a Zintl thermoelectric material in a thermoelectric power generation device operating at high temperature, e.g. at or above 1000K, is disclosed. The Zintl thermoelectric material may comprise Yb.sub.14MnSb.sub.11. The alumina may be applied as an adhesive paste dried and cured on a substantially oxide free surface of the Zintl thermoelectric material and polished to a final thickness. The sublimation suppression barrier may be finalized by baking out the alumina layer on the Zintl thermoelectric material until it becomes substantially clogged with ytterbia.

  8. Special requirements for alumina ceramic of ESG electrode bowl

    Institute of Scientific and Technical Information of China (English)

    ZHANG Jun-an; XUE Kai; ZHANG Jia-tai; ZHANG Qiang

    2004-01-01

    At present ESG (Electrostatic Suspended Gyro) is the most precise inertia element in the world. The electrode bowl, which has direct effect on the precision of ESG, is a key part to ESG. Through the analysis of the function and characteristic of the electrode bowl in hollow rotor ESG and the present situation of new material development in the world, the alumina ceramic is regarded as the best material for the electrode bowl of hollow rotor ESG. By analyzing the present situation of alumina ceramic in the world, main technique requirements have been put forward for the alumina ceramic of ESG electrode bowl which is also fit for solid rotor ESG.

  9. Wenshan’s 800,000-ton Alumina Project Completed

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    <正>On September 26,2012,the completion ceremony of the 800,000-ton alumina project was held at the alumina factory in Matang Industrial Park, Wenshan city,Yunnan.Wenshan’s 800,000-ton alumina project and its supporting mining construction projects have been listed as one of 20 major industrial construction projects of Yunnan. The project covers an area of approximately 5,500 mu,with an estimated total investment of RMB 4,987 million. It is invested and built

  10. Porous Alumina Based Capacitive MEMS RH Sensor

    CERN Document Server

    Juhasz, L; Timar-Horvath, Veronika; Desmulliez, Marc; Dhariwal, Resh

    2008-01-01

    The aim of a joint research and development project at the BME and HWU is to produce a cheap, reliable, low-power and CMOS-MEMS process compatible capacitive type relative humidity (RH) sensor that can be incorporated into a state-of-the-art, wireless sensor network. In this paper we discuss the preparation of our new capacitive structure based on post-CMOS MEMS processes and the methods which were used to characterize the thin film porous alumina sensing layer. The average sensitivity is approx. 15 pF/RH% which is more than a magnitude higher than the values found in the literature. The sensor is equipped with integrated resistive heating, which can be used for maintenance to reduce drift, or for keeping the sensing layer at elevated temperature, as an alternative method for temperature-dependence cancellation.

  11. Aluminum matrix composites reinforced with alumina nanoparticles

    CERN Document Server

    Casati, Riccardo

    2016-01-01

    This book describes the latest efforts to develop aluminum nanocomposites with enhanced damping and mechanical properties and good workability. The nanocomposites exhibited high strength, improved damping behavior and good ductility, making them suitable for use as wires. Since the production of metal matrix nanocomposites by conventional melting processes is considered extremely problematic (because of the poor wettability of the nanoparticles), different powder metallurgy routes were investigated, including high-energy ball milling and unconventional compaction methods. Special attention was paid to the structural characterization at the micro- and nanoscale, as uniform nanoparticle dispersion in metal matrix is of prime importance. The aluminum nanocomposites displayed an ultrafine microstructure reinforced with alumina nanoparticles produced in situ or added ex situ. The physical, mechanical and functional characteristics of the materials produced were evaluated using different mechanical tests and micros...

  12. Electrochemical modification process of anodic alumina membrane

    Institute of Scientific and Technical Information of China (English)

    YU Mei; LIU Jian-hua; LI Song-mei

    2006-01-01

    The modification procedure of anodic alumina membrane(AAM) was studied. The AAM structure after modification was characterized by nickel nanowires prepared in AAM. Scanning electron microscopy was used to characterize the topography and structure properties of the AAM and nickel nanowires. The transformation of the current during the voltage reduction was studied. The mechanism of current and structure change during modification was discussed. The results show that a root structure produces after the AAM modification. The length of the root structure depends on the velocity of the voltage reduction. Slow voltage reduction leads to a large length of the root structure,otherwise,a short length of the root structure. At the end of the modification,the barrier layer is thin enough to be passed by electrons. Hence,the direct electrodeposition of one-dimensional nanowires can be carried out on the AAM with barrier layer and aluminum matrix successfully without any other treatments.

  13. Crystallography of Alumina-YAG-Eutectic

    Science.gov (United States)

    Farmer, Serene C.; Sayir, Ali; Dickerson, Robert M.; Matson, Lawrence E.

    2000-01-01

    Multiple descriptions of the alumina-YAG eutectic crystallography appear in the ceramic literature. The orientation between two phases in a eutectic system has direct impact on residual stress, morphology, microstructural stability, and high temperature mechanical properties. A study to demonstrate that the different crystallographic relationships can be correlated with different growth constraints was undertaken. Fibers produced by Laser-Heated Float Zone (LHFZ) and Edge-defined Film-fed Growth (EFG) were examined. A map of the orientation relationship between Al2O3 and Y3Al5O12 and their relationship to the fiber growth axis as a function of pull rate are presented. Regions in which a single orientation predominates are identified.

  14. Fracture simulation for zirconia toughened alumina microstructure

    CERN Document Server

    Kim, Kyungmok; Forest, Bernard

    2013-01-01

    Purpose - The purpose of this paper is to describe finite element modelling for fracture and fatigue behaviour of zirconia toughened alumina microstructures. Design/methodology/approach - A two-dimensional finite element model is developed with an actual $Al{_2}O{_3}$ - 10 vol% $ZrO{_2}$ microstructure. A bilinear, time-independent cohesive zone law is implemented for describing fracture behaviour of grain boundaries. Simulation conditions are similar to those found at contact between a head and a cup of hip prosthesis. Residual stresses arisen from the mismatch of thermal coefficient between grains are determined. Then, effects of a micro-void and contact stress magnitude are investigated with models containing residual stresses. For the purpose of simulating fatigue behaviour, cyclic loadings are applied to the models. Findings - Results show that crack density is gradually increased with increasing magnitude of contact stress or number of fatigue cycles. It is also identified that a micro-void brings about...

  15. Characterization of Glasses in One Type of Alumina Rich Fly Ash by Chemical Digestion Methods: Implications for Alumina Extraction

    Directory of Open Access Journals (Sweden)

    Lijun Zhao

    2016-01-01

    Full Text Available In recent years, one type of alumina rich fly ash (ARFA with about 50 wt% of alumina has been extensively investigated for alumina extraction in China. Due to the silica in ARFA, alumina extraction would have to generate a huge amount of solid waste. There is a growing interest in the glasses in ARFA, because they are composed mainly of silica and could be removed prior to alumina extraction. In this work, the glasses in ARFA have been investigated by chemical methods, that is, acid and base digestions. The chemical compositions have been measured by XRF for ARFA from the digestion processes. The K2O standard, XRD, and FTIR spectroscopies were successfully used to define the digestions processes, and size analysis and SEM-EDX provided rich information on particle transformations. As a result, acid and base digestion methods were found to produce very similar results for the glasses in ARFA. The K2O standard was attributed to the formation of glasses by illites, and TiO2 and Fe2O3 were proposed to originate from ilmenite in alumina rich coals (ARC. Some implications of the results were also discussed for the alumina extraction from ARFA.

  16. Determination of grain boundary impurity effects in polycrystalline silicon

    Science.gov (United States)

    Kazmerski, L. L.; Dick, J. R.

    1984-06-01

    An analysis is made of the relationships existing between the chemistry and composition of the intergrain regions in polycrystalline silicon, the electrooptical properties of the grain boundaries, and the performance of polycrystalline Si solar cells. The following two impurity mechanisms are emphasized: segregation of oxygen to grain boundaries during heat treatments and the passivation of grain boundaries by incorporation of hydrogen. It is shown that hydrogen is localized at the defects; the effects of hydrogen localization on the electrical characteristics of the grain boundary and of the solar cell are discussed.

  17. Improved transport properties of polycrystalline YBCO thin-films

    Science.gov (United States)

    Azoulay, J.; Verdyan, A.; Lapsker, I.

    1994-12-01

    Resistive evaporation technique was used to fabricate polycrystalline YBaCuO and YBaNaCuO thin films on MgO substrates. Heat treatment was carried out in a low oxygen partial pressure. Polycrystalline YBCO and Na doped YBCO thin films samples were thus obtained using the same technique and conditions. The critical current density of Na doped YBCO sample was measured to be significantly higher than that of the undoped YBCO one. The results are discussed in terms of the Na contribution to the intragrain conductivity.

  18. High Alumina Refractory Mortars GB/T 2994-2008

    Institute of Scientific and Technical Information of China (English)

    Wang Jing; Chai Junlan

    2009-01-01

    @@ 1 Scope This standard specifies the classification, techni-cal requirements, test methods, quality appraisal pro-cedure, packing, marking, transportation, storage and quality certificate of high alumina refractory mortars.

  19. Direct spray pyrolysis of aluminum chloride solution for alumina preparation

    Institute of Scientific and Technical Information of China (English)

    吕国志; 张廷安; 王龙; 马思达; 豆志河; 刘燕

    2014-01-01

    The effects of pyrolysis mode and pyrolysis parameters on Cl content in alumina were investigated, and the alumina products were characterized by XRD, SEM and ASAP. The experimental results indicate that the spray pyrolysis efficiency is higher than that of static pyrolysis process, and the reaction and evaporation process lead to a multi-plot state of the alumina products by spray pyrolysis. Aluminum phase starts to transform intoγ-Al2O3 at spray pyrolysis temperature of 600 °C, which is about 200 °C lower than that of static pyrolysis process. The primary particle size of γ-Al2O3 product is 27.62 nm, and Cl content in alumina products is 0.38%at 800 °C for 20 min.

  20. Fused Cast Alumina Refractory Products for Glass Tank Furnace

    Institute of Scientific and Technical Information of China (English)

    SHEN Keyin

    2006-01-01

    @@ 1 Subject and Scope The standard specifies the requirement, testing method, inspection rule and requirements for the labeling, packing, shipping and storing of the fused cast alumina refractory products for glass tanks.

  1. Aluminum microstructures on anodic alumina for aluminum wiring boards.

    Science.gov (United States)

    Jha, Himendra; Kikuchi, Tatsuya; Sakairi, Masatoshi; Takahashi, Hideaki

    2010-03-01

    The paper demonstrates simple methods for the fabrication of aluminum microstructures on the anodic oxide film of aluminum. The aluminum sheets were first engraved (patterned) either by laser beam or by embossing to form deep grooves on the surface. One side of the sheet was then anodized, blocking the other side by using polymer mask to form the anodic alumina. Because of the lower thickness at the bottom part of the grooves, the part was completely anodized before the complete oxidation of the other parts. Such selectively complete anodizing resulted in the patterns of metallic aluminum on anodic alumina. Using the technique, we fabricated microstructures such as line patterns and a simple wiring circuit-board-like structure on the anodic alumina. The aluminum microstructures fabricated by the techniques were embedded in anodic alumina/aluminum sheet, and this technique is promising for applications in electronic packaging and devices.

  2. High Alumina Refractory Bricks for Electric Arc Furnace Roofs

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ 1 Scope This standard specifies the sort, technical requirement, test method, inspection rules, marking, packing, transportation, storage and quality certification of high alumina refractory bricks for electric arc furnace roofs.

  3. Superhydrophobic alumina surface based on stearic acid modification

    Energy Technology Data Exchange (ETDEWEB)

    Feng Libang, E-mail: lepond@hotmail.com [School of Mechatronic Engineering, Lanzhou Jiaotong University, Lanzhou 730070 (China); Zhang Hongxia; Mao Pengzhi; Wang Yanping; Ge Yang [School of Mechatronic Engineering, Lanzhou Jiaotong University, Lanzhou 730070 (China)

    2011-02-15

    A novel superhydrophobic alumina surface is fabricated by grafting stearic acid layer onto the porous and roughened aluminum film. The chemical and phase structure, morphology, and the chemical state of the atoms at the superhydrophobic surface were investigated by techniques as FTIR, XRD, FE-SEM, and XPS, respectively. Results show that a super water-repellent surface with a contact angle of 154.2{sup o} is generated. The superhydrophobic alumina surface takes on an uneven flowerlike structure with many nanometer-scale hollows distribute in the nipple-shaped protrusions, and which is composed of boehmite crystal and {gamma}-Al{sub 2}O{sub 3}. Furthermore, the roughened and porous alumina surface is coated with a layer of hydrophobic alkyl chains which come from stearic acid molecules. Therefore, both the roughened structure and the hydrophobic layer endue the alumina surface with the superhydrophobic behavior.

  4. Synthesis of beta alumina from aluminum hydroxide and oxyhydroxide precursors

    CSIR Research Space (South Africa)

    Van Zyl, A

    1993-02-01

    Full Text Available Two aluminium oxyhydroxides, boehmite and pseudoboehmite, and two aluminium hydroxides, bayerite and gibbsite, have been investigated as precursors for the synthesis of the solid electrolyte, beta alumina. Reaction pathways and products have been...

  5. 8% Efficient thin-film polycrystalline-silicon solar cells based on aluminium-induced crystallization and thermal CVD

    Energy Technology Data Exchange (ETDEWEB)

    Gordon, I.; Carnel, L.; Van Gestel, D.; Beaucarne, G.; Poortmans, J. [IMEC VZW, Leuven (Belgium)

    2006-07-01

    A considerable cost reduction could be achieved in photovoltaics if efficient solar cells could be made from polycrystalline-silicon (pc-Si) thin films on inexpensive substrates. We recently showed promising solar cells results using pc-Si layers obtained by aluminium-induced crystallization (AlC) of amorphous silicon in combination with thermal chemical vapor deposition (CVD). To obtain highly efficient pc-Si solar cells, however, the material quality has to be optimized and cell processes different from those applied for standard bulk-Si solar cells have to be developed. In this work, we present the different process steps that we recently developed to enhance the efficiency of pc-Si solar cells on alumina substrates made by AlC in combination with thermal CVD. Our present pc-Si solar cell process yields cells in substrate configuration with efficiencies so far of up to 8.0%. Spin-on oxides are used to smoothen the alumina substrate surface to enhance the electronic quality of the absorber layers. The cells have heterojunction emitters consisting of thin a-Si layers that yield much higher V{sub oc} values than classical diffused emitters. Base and emitter contacts are on top of the cell in interdigitated finger patterns, leading to fill factors above 70%. The front surface of the cells is plasma textured to increase the current density. Our present pc-Si solar cell efficiency of 8% together with the fast progression that we have made over the last few years indicate the large potential of pc-Si solar cells based on the AlC seed layer approach. (author)

  6. Recent advances in silica-alumina refractory: A review

    Directory of Open Access Journals (Sweden)

    Chaouki Sadik

    2014-06-01

    Full Text Available In this article, the elaboration and the characterization of silica-alumina refractory have been reviewed. Refractory oxides encompass a broad range of unary, binary, and ternary ceramic compounds that can be used in structural, insulating, and other applications. This paper provides a historical perspective on the elaboration and the use of silica-alumina refractory, reviews applications for refractory oxides, describes typical processing routes, overviews fundamental structure–property relations, and summarizes the properties of these materials.

  7. Electronic Structure of High-Pressure Alumina Polymorphs

    Institute of Scientific and Technical Information of China (English)

    LIU Xiao-Lei; DUAN Wen-Hui; GU Bing-Lin

    2000-01-01

    Electronic properties are investigated for three alumina polymorphs (corundum, Rb2 O3 (Ⅱ) and Pbnm perovskite),which are predicted as the stable structures under different pressure range, by means of the first-principles molecular dynamics method within local density functional framework. The similarity in electronic properties of the polymorphs of alumina is observed. The effect of possible phase transitions on ruby (Cr+3-doped Al2 O3)fluorescences is discussed.

  8. CSL grain boundary distribution in alumina and zirconia ceramics

    OpenAIRE

    Vonlanthen, Pierre; Grobéty, Bernard

    2008-01-01

    The distributions of general and coincidence site lattice (CSL) grain boundaries (GBs) in texture-free alumina and zirconia ceramics sintered at two different temperatures were investigated based on electron backscatter diffraction (EBSD) measurements. Results were compared with the distributions obtained from random 2D spatial models and with calculated random distributions reported in the literature. All alumina samples independent on sintering temperature show the same characteristic devia...

  9. Preparation of spherical hollow alumina particles by thermal plasma

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Wonkyung [Department of Chemical Engineering, INHA University, 253 Yonghyun-dong, Nam-gu, Incheon 402‐751 (Korea, Republic of); Regional Innovation Center for Environmental Technology of Thermal Plasma (RIC-ETTP), INHA University, 253 Yonghyun-dong, Nam-gu, Incheon 402‐751 (Korea, Republic of); Choi, Sooseok [Center for Advance Research in Fusion Reactor Engineering, Seoul National University, 599 Gwanak-ro, Gwanak-gu, Seoul 151‐742 (Korea, Republic of); Oh, Seung-Min [Daejoo Electronic Materials Co., 1236‐10 Jeongwang-dong, Siheung-si, Kyunggi-do 429‐848 (Korea, Republic of); Park, Dong-Wha, E-mail: dwpark@inha.ac.kr [Department of Chemical Engineering, INHA University, 253 Yonghyun-dong, Nam-gu, Incheon 402‐751 (Korea, Republic of); Regional Innovation Center for Environmental Technology of Thermal Plasma (RIC-ETTP), INHA University, 253 Yonghyun-dong, Nam-gu, Incheon 402‐751 (Korea, Republic of)

    2013-02-01

    Spherical hollow particles were prepared from solid alumina powders using DC arc thermal plasma, and then spray coating was performed with the as-prepared particles. Operating variables for the hollow particle preparation process were additional plasma gas, input power, and carrier gas flow rate. The spherical hollow alumina particles were produced in the case of using additive gas of H{sub 2} or N{sub 2}, while alumina surface was hardly molten in the pure argon thermal plasma. In addition, the hollow particles were well produced in high power and low carrier gas conditions due to high melting point of alumina. Hollow structure was confirmed by focused ion beam-scanning electron microscopy analysis. Morphology and size distribution of the prepared particles that were examined by field emission-scanning electron microscopy and phase composition of the particles was characterized by X-ray diffraction. In the spray coating process, the as-prepared hollow particles showed higher deposition rate. - Highlights: ► Spherical hollow alumina powder was prepared by non-transferred DC arc plasma. ► Diatomic gasses were added in Ar plasma for high power. ► Prepared hollow alumina powder was efficient for the plasma spray coating.

  10. Antibacterial activity of zinc oxide-coated nanoporous alumina

    Energy Technology Data Exchange (ETDEWEB)

    Skoog, S.A. [Joint Department of Biomedical Engineering, University of North Carolina and North Carolina State University, Box 7115, Raleigh, NC 27695-7115 (United States); Bayati, M.R. [Department of Materials Science and Engineering, North Carolina State University, Box 7907, Raleigh, NC 27695-7907 (United States); Petrochenko, P.E. [Joint Department of Biomedical Engineering, University of North Carolina and North Carolina State University, Box 7115, Raleigh, NC 27695-7115 (United States); Division of Biology, Office of Science and Engineering Laboratories, Center for Devices and Radiological Health, U.S. Food and Drug Administration, Silver Spring, MD 20993 (United States); Stafslien, S.; Daniels, J.; Cilz, N. [Center for Nanoscale Science and Engineering, North Dakota State University, 1805 Research Park Drive, Fargo, ND 58102 (United States); Comstock, D.J.; Elam, J.W. [Energy Systems Division, Argonne National Laboratory, Argonne, IL 60439 (United States); Narayan, R.J., E-mail: roger_narayan@msn.com [Joint Department of Biomedical Engineering, University of North Carolina and North Carolina State University, Box 7115, Raleigh, NC 27695-7115 (United States); Department of Materials Science and Engineering, North Carolina State University, Box 7907, Raleigh, NC 27695-7907 (United States)

    2012-07-25

    Highlights: Black-Right-Pointing-Pointer Atomic layer deposition was used to deposit ZnO on nanoporous alumina membranes. Black-Right-Pointing-Pointer Scanning electron microscopy showed continuous coatings of zinc oxide nanocrystals. Black-Right-Pointing-Pointer Activity against B. subtilis, E. coli, S. aureus, and S. epidermidis was shown. - Abstract: Nanoporous alumina membranes, also known as anodized aluminum oxide membranes, are being investigated for use in treatment of burn injuries and other skin wounds. In this study, atomic layer deposition was used for coating the surfaces of nanoporous alumina membranes with zinc oxide. Agar diffusion assays were used to show activity of zinc oxide-coated nanoporous alumina membranes against several bacteria found on the skin surface, including Bacillus subtilis, Escherichia coli, Staphylococcus aureus, and Staphylococcus epidermidis. On the other hand, zinc oxide-coated nanoporous alumina membranes did not show activity against Pseudomonas aeruginosa, Enterococcus faecalis, and Candida albicans. These results suggest that zinc oxide-coated nanoporous alumina membranes have activity against some Gram-positive and Gram-negative bacteria that are associated with skin colonization and skin infection.

  11. Adsorption of itaconic acid from aqueous solutions onto alumina

    Directory of Open Access Journals (Sweden)

    JELENA J. GULICOVSKI

    2008-08-01

    Full Text Available Itaconic acid, IA (C5H6O4, was investigated as a potential flocculant for the aqueous processing of alumina powders. The adsorption of IA, as a function of its concentration and pH value of the solution, onto the alumina surface was studied by the solution depletion method. The stability of the suspensions in the presence of itaconic acid was evaluated in light of the surface charge of the alumina powder used, the degree of dissociation of IA, as well as the sedimentation behavior and rheology of the suspensions. It was found that the adsorption process is extremely pH dependent; the maximum adsorption of IA onto alumina surface occurring at a pH close to the value of the first IA dissociation constant, pKa1. Also, IA does not influence the value of the point of zero charge of alumina. It was shown that IA represents an efficient flocculant for concentrated acidic alumina suspensions.

  12. Procoagulant behavior and platelet microparticle generation on nanoporous alumina.

    Science.gov (United States)

    Ferraz, Natalia; Hong, Jaan; Karlsson Ott, Marjam

    2010-05-01

    In the present work, we have investigated platelet microparticle (PMP) generation in whole blood after contact with nanoporous alumina. Alumina membranes with pore sizes of 20 and 200 nm in diameter were incubated with whole blood and the number of PMP in the fluid phase was determined by flow cytometry. The role of the complement system in PMP generation was investigated using an analog of the potent complement inhibitor compstatin. Moreover, the procoagulant activity of the two pore size membranes were compared by measuring thrombin formation. Results indicated that PMP were not present in the fluid phase after whole blood contact with either of the alumina membranes. However, scanning electron microscope micrographs clearly showed the presence of PMP clusters on the 200 nm pore size alumina, while PMP were practically absent on the 20 nm membrane. We probed no influence of complement activation in PMP generation and adhesion and we hypothesize that other specific material-related protein-platelet interactions are taking place. A clear difference in procoagulant activity between the membranes could also be seen, 20 nm alumina showed 100% higher procoagulant activity than 200 nm membrane. By combining surface evaluation and flow cytometry analyses of the fluid phase, we are able to conclude that 200 nm pore size alumina promotes PMP generation and adhesion while the 20 nm membrane does not appreciably cause any release or adhesion of PMP, thus indicating a direct connection between PMP generation and nanoporosity.

  13. Alumina Concentration Detection Based on the Kernel Extreme Learning Machine.

    Science.gov (United States)

    Zhang, Sen; Zhang, Tao; Yin, Yixin; Xiao, Wendong

    2017-09-01

    The concentration of alumina in the electrolyte is of great significance during the production of aluminum. The amount of the alumina concentration may lead to unbalanced material distribution and low production efficiency and affect the stability of the aluminum reduction cell and current efficiency. The existing methods cannot meet the needs for online measurement because industrial aluminum electrolysis has the characteristics of high temperature, strong magnetic field, coupled parameters, and high nonlinearity. Currently, there are no sensors or equipment that can detect the alumina concentration on line. Most companies acquire the alumina concentration from the electrolyte samples which are analyzed through an X-ray fluorescence spectrometer. To solve the problem, the paper proposes a soft sensing model based on a kernel extreme learning machine algorithm that takes the kernel function into the extreme learning machine. K-fold cross validation is used to estimate the generalization error. The proposed soft sensing algorithm can detect alumina concentration by the electrical signals such as voltages and currents of the anode rods. The predicted results show that the proposed approach can give more accurate estimations of alumina concentration with faster learning speed compared with the other methods such as the basic ELM, BP, and SVM.

  14. Porous alumina and zirconia ceramics with tailored thermal conductivity

    Science.gov (United States)

    Gregorová, E.; Pabst, W.; Sofer, Z.; Jankovský, O.; Matějíček, J.

    2012-11-01

    The thermal conductivity of porous ceramics can be tailored by slip casting and uniaxial dry pressing, using either fugitive pore formers (saccharides) or partial sintering. Porous alumina and zirconia ceramics have been prepared using appropriate powder types (ungranulated for casting, granulated for pressing) and identical firing regimes (but different maximum temperatures in the case of partial sintering). Thermal diffusivities have been measured by the laser- and xenon-flash method and transformed into relative thermal conductivities, which enable a temperature-independent comparison between different materials. While the porosity can be controlled in a similar way for both materials when using pore formers, partial sintering exhibits characteristic differences between alumina and zirconia (for alumina porosities below 45 %, full density above 1600 °C, for zirconia porosities below 60 %, full density above 1300 °C). The different compaction behavior of alumina and zirconia (porosity after pressing 0.465 and 0.597, respectively) is reflected in the fact that for alumina the relative conductivity data of partially sintered materials are below the exponential prediction, while for zirconia they coincide with the latter. Notwithstanding these characteristic differences, for both alumina and zirconia it is possible to tailor the thermal conductivity from 100 % down to approx. 15 % of the solid phase value.

  15. Dynamic yield and tensile strengths of spark plasma sintered alumina

    Science.gov (United States)

    Girlitsky, I.; Zaretsky, E.; Kalabukhov, S.; Dariel, M.; Frage, N.

    2014-05-01

    Fully dense alumina samples with 0.6 μm grain size were produced from alumina powder using Spark Plasma Sintering and tested in two types of VISAR-instrumented planar impact tests. In the tests of the first type the samples of 0.28 to 6-mm thickness were loaded by 1-mm tungsten impactors accelerated up to a velocity of about 1 km/s. These tests were aimed to study the Hugoniot elastic limit (HEL) of the SPS-processed alumina and the decay of the elastic precursor wave with propagation distance. In the second type of test the samples of ~3-mm thickness were loaded by 1-mm copper impactors accelerated up to velocities 100-1000 m/s. These tests were aimed to study the dynamic tensile (spall) strength of the alumina. The data on tensile fracture of the alumina demonstrate a monotonic decline of the spall strength with the amplitude of the loading stress pulse. The data on the decay of the elastic precursor wave allows for determining the rates of the irreversible (inelastic) strains in the SPS-processed alumina at the initial stages of shock-induced inelastic deformation and, thus, to derive some conclusions concerning the mechanisms responsible of the deformation.

  16. Influence of additives on the stability of the phases of alumina; Influencia de aditivos na estabilidade das fases da alumina

    Energy Technology Data Exchange (ETDEWEB)

    Rosario, D.C.C.; Gouvea, D., E-mail: deisedorosario@usp.br [Universidade de Sao Paulo (USP), SP (Brazil). Departamento de Engenharia Metalurgica e de Materiais. Laboratorio de Processos Ceramicos

    2011-07-01

    Problems with the stability of gamma alumina in catalytic reactions have been solved with the inclusion of additives during the synthesis of alumina. These additives stabilize the temperature of phase transition allowing the use of metastable alumina at high temperatures, but the mechanisms of action of additives are not well defined. It is known that each family of additive or additives behaves in different ways for this stabilization. This work aimed to study the performance of MgO and ZrO{sub 2}, respectively at different concentrations in alumina synthesized via Pechini. The samples were analyzed by DSC, X-ray diffraction, measurement of specific surface area by BET analysis, and infrared analysis. The results showed an increase in transition temperature for both additives, and a different changes for specific surface area, showing that MgO and ZrO{sub 2} work on improving the stability but with distinct mechanisms. (author)

  17. Anomalous photoelectric effect of a polycrystalline topological insulator film.

    Science.gov (United States)

    Zhang, Hongbin; Yao, Jiandong; Shao, Jianmei; Li, Hai; Li, Shuwei; Bao, Dinghua; Wang, Chengxin; Yang, Guowei

    2014-07-29

    A topological insulator represents a new state of quantum matter that possesses an insulating bulk band gap as well as a spin-momentum-locked Dirac cone on the surface that is protected by time-reversal symmetry. Photon-dressed surface states and light-induced surface photocurrents have been observed in topological insulators. Here, we report experimental observations of an anomalous photoelectric effect in thin films of Bi2Te3, a polycrystalline topological insulator. Under illumination with non-polarised light, transport measurements reveal that the resistance of the topological surface states suddenly increases when the polycrystalline film is illuminated. The resistance variation is positively dependent on the light intensity but has no relation to the applied electric field; this finding can be attributed to the gap opening of the surface Dirac cone. This observation of an anomalous photoelectric effect in polycrystalline topological insulators offers exciting opportunities for the creation of photodetectors with an unusually broad spectral range. Moreover, polycrystalline topological insulator films provide an attractive material platform for exploring the nature and practical application of topological insulators.

  18. The decoration of vicinal copper polycrystalline surface by Antimony

    CSIR Research Space (South Africa)

    Ndlovu, GF

    2011-07-01

    Full Text Available An Ultra-high Vacuum Variable Temperature Scanning Tunnelling Microscope was used to study the growth mechanism of Antimony on vicinal Cu polycrystalline samples. The STM data after deposition of 0.3 ML Sb at 300°C showed localization of Sb atoms...

  19. Mechanical properties of monocrystalline and polycrystalline monolayer black phosphorus

    Science.gov (United States)

    Cao, Pinqiang; Wu, Jianyang; Zhang, Zhisen; Ning, Fulong

    2017-01-01

    The mechanical properties of monocrystalline and polycrystalline monolayer black phosphorus (MBP) are systematically investigated using classic molecular dynamic simulations. For monocrystalline MBP, it is found that the shear strain rate, sample dimensions, temperature, atomic vacancies and applied statistical ensemble affect the shear behaviour. The wrinkled morphology is closely connected with the direction of the in-plane shear, dimensions of the samples, and applied ensembles. Particularly, small samples subjected to loading/unloading of the shear deformation along the armchair direction demonstrate a clear mechanical hysteresis loop. For polycrystalline MBP, the maximum shear stress as a function of the average grain size follows an inverse pseudo Hall-Petch type relationship under an isothermal-isobaric (NPT) ensemble, whereas under a canonical (NVT) ensemble, the maximum shear stress of polycrystalline MBP exhibits a ‘flipped’ behaviour. Furthermore, polycrystalline MBP subjected to uniaxial tension also exhibits a strongly grain size-dependent mechanical response, and it can fail by brittle intergranular and transgranular fractures because of its weaker grain boundary structures and the direction-dependent edge energy, respectively. These findings provide useful insight into the mechanical design of BP for nanoelectronic devices.

  20. System of polarization correlometry of biological liquids layers polycrystalline structure

    Science.gov (United States)

    Ushenko, A. G.; Boychuk, T. M.; Mincer, O. P.; Angelsky, P. O.; Bodnar, N. B.; Oleinichenko, B. P.; Bizer, L. I.

    2013-09-01

    A model of generalized optical anisotropy of human bile is suggested and a method of polarimetric of the module and phase Fourier of the image of the field of laser radiation is analytically substantiated, that is generated by the mechanisms of linear and circular birefringence of polycrystalline networks with a diagnosis and differentiation of cholelithiasis against a background of chronic cholecystitis.

  1. Microstructure evolution of polycrystalline silicon by molecular dynamics simulation

    Science.gov (United States)

    Chen, Xiao; Ding, Jianning; Jiang, Cunhua; Liu, Zunfeng; Yuan, Ningyi

    2017-06-01

    Polycrystalline silicon is the dominant material in solar cells and plays an important role in photovoltaic industry. It is important for not only the conventional production of silicon ingots but also the direct growth of silicon wafers to control crystallization for obtaining the desired polycrystalline silicon. To the best of our knowledge, few studies have systematically reported about the effects of crystalline planes on the solidification behavior of liquid silicon and the analysis of the microstructural features of the polysilicon structure. In this study, molecular dynamics simulations were employed to investigate the solidification and microstructure evolution of polysilicon, with focus on the effects of the seed distribution and cooling rate on the growth of polycrystalline silicon. The (110), (111), and (112) planes were extruded by the (100) plane and formed the inclusion shape. The crystallization of silicon consisted of diamond-type structures is relatively high at a low cooling rate. The simulations provide substantial information regarding microstructures and serve as guidance for the growth of polycrystalline silicon.

  2. Microstructure evolution of polycrystalline silicon by molecular dynamics simulation

    Directory of Open Access Journals (Sweden)

    Xiao Chen

    2017-06-01

    Full Text Available Polycrystalline silicon is the dominant material in solar cells and plays an important role in photovoltaic industry. It is important for not only the conventional production of silicon ingots but also the direct growth of silicon wafers to control crystallization for obtaining the desired polycrystalline silicon. To the best of our knowledge, few studies have systematically reported about the effects of crystalline planes on the solidification behavior of liquid silicon and the analysis of the microstructural features of the polysilicon structure. In this study, molecular dynamics simulations were employed to investigate the solidification and microstructure evolution of polysilicon, with focus on the effects of the seed distribution and cooling rate on the growth of polycrystalline silicon. The (110, (111, and (112 planes were extruded by the (100 plane and formed the inclusion shape. The crystallization of silicon consisted of diamond-type structures is relatively high at a low cooling rate. The simulations provide substantial information regarding microstructures and serve as guidance for the growth of polycrystalline silicon.

  3. Radiation-hard polycrystalline mercuric iodide semiconductor particle counters

    Energy Technology Data Exchange (ETDEWEB)

    Schieber, M. [Hebrew Univ., Jerusalem (Israel)]|[Sandia National Laboratories, Livermore Ca 94556 (United States); Zuck, A.; Melekhov, L.; Nissenbaum, J. [Hebrew Univ., Jerusalem (Israel); Turchetta, R.; Dulinski, W.; Husson, D.; Riester, J.L. [LEPSI (ULP/IN2P3), Strasbourg (France)

    1998-06-01

    Mercuric iodide polycrystalline radiation detectors, which can act as nuclear particle counters and for large area imaging devices, have been fabricated using three different methods. Response to X- and gamma rays, beta particles and to 100GeV muons, as well as radiation hardness results are briefly described. (orig.) 8 refs.

  4. Effect of alumina composition and surface integrity in alumina/epoxy composites on the ultrasonic attenuation properties.

    Science.gov (United States)

    Cho, Eikhyun; Park, Gwanwoo; Lee, Jae-Wan; Cho, Sung-Min; Kim, Taekyung; Kim, Joongeok; Choi, Wonjoon; Ohm, Won-Suk; Kang, Shinill

    2016-03-01

    We report a method of fabricating backing blocks for ultrasonic imaging transducers, using alumina/epoxy composites. Backing blocks contain scatterers such as alumina particles interspersed in the epoxy matrix for the effective scattering and attenuation of ultrasound. Here, the surface integrity can be an issue, where the composite material may be damaged during machining because of differences in strength, hardness and brittleness of the hard alumina particles and the soft epoxy matrix. Poor surface integrity results in the formation of air cavities between the backing block and the piezoelectric element upon assembly, hence the increased reflection off the backing block and the eventual degradation in image quality. Furthermore, with an issue of poor surface integrity due to machining, it is difficult to increase alumina as scatterers more than a specific mass fraction ratio. In this study, we increased the portion of alumina within epoxy matrix by obtaining an enhanced surface integrity using a net shape fabrication method, and verified that this method could allow us to achieve higher ultrasonic attenuation. Backing blocks were net-shaped with various mass fractions of alumina to characterize the formability and the mechanical properties, including hardness, surface roughness and the internal micro-structure, which were compared with those of machined backing blocks. The ultrasonic attenuation property of the backing blocks was also measured.

  5. Electronic structure of nanocrystalline and polycrystalline hydrogen storage materials

    Energy Technology Data Exchange (ETDEWEB)

    Smardz, L. [Institute of Molecular Physics, Polish Academy of Sciences, Smoluchowskiego 17 Street, 60-179 Poznan (Poland); Jurczyk, M.; Smardz, K.; Nowak, M.; Makowiecka, M.; Okonska, I. [Institute of Materials Science and Engineering, Poznan University of Technology, M. Sklodowska-Curie 5 Sq., 60-965 Poznan (Poland)

    2008-02-15

    To optimise the choice of the compounds for a selected application, a better understanding of the role of each alloy constituent on the electronic properties of the material is crucial. In this work, we study experimentally the electronic properties of nanocrystalline and polycrystalline (Mg{sub 1-x}M{sub x}){sub 2}Ni, (Mg{sub 1-x}M{sub x}){sub 2}Cu, La(Ni{sub 1-x}M{sub x}){sub 5}, and Ti(Ni{sub 1-x}M'{sub x}) (M = Mn, Al; M' = Fe, Mg, Zr) alloys. The nanocrystalline and polycrystalline samples were prepared by mechanical alloying (MA) followed by annealing and arc melting method, respectively. All X-ray photoelectron spectroscopy (XPS) spectra were measured immediately after cleaning of the sample surface in a vacuum of 8 x 10{sup -11} mbar. Furthermore, we have measured XPS spectra of in situ prepared nanocrystalline and polycrystalline LaNi{sub 5}, TiNi, and Mg{sub 2}Ni thin films and compared with those obtained for ex situ prepared bulk materials. The substitution of Mg in Mg{sub 2}Ni and Mg{sub 2}Cu, Ni in LaNi{sub 5} and TiNi by transition metals leads to significant modifications of the shape and width of the valence band of the nanocrystalline as well as polycrystalline samples. Especially, the valence bands of the MA nanocrystalline alloys are considerably broader compared to those measured for the polycrystalline samples. Results also showed that the strong modifications of the electronic structure of the nanocrystalline alloys could significantly influence on their hydrogenation properties. (author)

  6. Cast alumina forming austenitic stainless steels

    Energy Technology Data Exchange (ETDEWEB)

    Muralidharan, Govindarajan; Yamamoto, Yukinori; Brady, Michael P

    2013-04-30

    An austenitic stainless steel alloy consisting essentially of, in terms of weight percent ranges 0.15-0.5C; 8-37Ni; 10-25Cr; 2.5-5Al; greater than 0.6, up to 2.5 total of at least one element selected from the group consisting of Nb and Ta; up to 3Mo; up to 3Co; up to 1W; up to 3Cu; up to 15Mn; up to 2Si; up to 0.15B; up to 0.05P; up to 1 total of at least one element selected from the group consisting of Y, La, Ce, Hf, and Zr; <0.3Ti+V; <0.03N; and, balance Fe, where the weight percent Fe is greater than the weight percent Ni, and wherein the alloy forms an external continuous scale comprising alumina, and a stable essentially single phase FCC austenitic matrix microstructure, the austenitic matrix being essentially delta-ferrite free and essentially BCC-phase-free. A method of making austenitic stainless steel alloys is also disclosed.

  7. Nanoparticle assisted coagulation of aqueous alumina suspensions

    Directory of Open Access Journals (Sweden)

    Abdullah Fatih Çetinel

    2012-02-01

    Full Text Available Colloidal processing of ceramics offers a high potential to achieve homogeneous microstructures with improved material properties. In this study, a novel forming method is investigated, which was already applied successfully for the fabrication of ceramic matrix composites (CMC, but is also considered to be a suitable direct casting technique for the fabrication of advanced ceramics with tailored microstructure and properties. The so-called nanoparticle assisted coagulation method (NPAC represents a modification of the hydrolysis-assisted solidification (HAS technique. It promises green components with high green strength, uniform density as well as homogeneous and tailored microstructure. Electrostatically stabilized colloidal suspensions with high solid loadings were produced by dispersing various fractions of submicron alumina powder and aluminium hydroxide nano-powder in water without use of any organic binder. Rheology and coagulation kinetics of suspensions and green part properties were studied regarding to modifications of pH value, setting temperature, amount of setting agent, amount of nano-powder, solids loading and process parameters like ultrasound treatment. It could be revealed that the homogeneous core-shell arrangement of submicron and nanoparticles in the colloidal state can be transmitted to the green state, which improves the microstructure and green density of the green parts. For this, the NPAC method is seen as a promising technique for the fabrication of advanced ceramics with tailored microstructure and properties.

  8. Mechanical properties of alumina porcelain during heating

    Science.gov (United States)

    Šín, Peter; Podoba, Rudolf; ŠtubÅa, Igor; Trník, Anton

    2014-11-01

    The mechanical strength and Young's modulus of green alumina porcelain (50 wt. % of kaolin, 25 wt. % of Al2O3, and 25 wt. % of feldspar) were measured during heating up to 900 °C and 1100 °C, respectively. To this end, we used the three point-bending method and modulated force thermomechanical analysis (mf-TMA). The loss liberation - of the physically bound water (20 - 250 °C) strengthens the sample and Young's modulus increases its values significantly. The dehydroxylation that takes place in the range of 400 - 650 °C causes a slight decrease in Young's modulus. On the other hand, the mechanical strength slightly increases in this temperature range, although it has a sudden drop at 420 °C. Beyond the dehydroxylation range, above 650 °C, both Young's modulus and mechanical strength increase. Above 950 °C, a sharp increase of Young's modulus is caused by the solid-state sintering and the new structure created by the high-temperature reactions in metakaolinite.

  9. Alumina-on-alumina total hip replacement for femoral neck fracture in healthy patients

    Directory of Open Access Journals (Sweden)

    Moretti Lorenzo

    2011-02-01

    Full Text Available Abstract Background Total hip replacement is considered the best option for treatment of displaced intracapsular fractures of the femoral neck (FFN. The size of the femoral head is an important factor that influences the outcome of a total hip arthroplasty (THA: implants with a 28 mm femoral head are more prone to dislocate than implants with a 32 mm head. Obviously, a large head coupled to a polyethylene inlay can lead to more wear, osteolysis and failure of the implant. Ceramic induces less friction and minimal wear even with larger heads. Methods A total of 35 THAs were performed for displaced intracapsular FFN, using a 32 mm alumina-alumina coupling. Results At a mean follow-up of 80 months, 33 have been clinically and radiologically reviewed. None of the implants needed revision for any reason, none of the cups were considered to have failed, no dislocations nor breakage of the ceramic components were recorded. One anatomic cementless stem was radiologically loose. Conclusions On the basis of our experience, we suggest that ceramic-on-ceramic coupling offers minimal friction and wear even with large heads.

  10. Fabrication and optical properties of TiO sub 2 nanowire arrays made by sol-gel electrophoresis deposition into anodic alumina membranes

    CERN Document Server

    Lin, Y; Yuan, X Y; Xie, T; Zhang, L D

    2003-01-01

    Ordered TiO sub 2 nanowire arrays have been successfully fabricated into the nanochannels of a porous anodic alumina membrane by sol-gel electrophoretic deposition. After annealing at 500 deg. C, the TiO sub 2 nanowire arrays and the individual nanowires were characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), selected area electron diffraction (SAED) and x-ray diffraction (XRD). SEM and TEM images show that these nanowires are dense and continuous with a uniform diameter throughout their entire length. XRD and SAED analysis together indicate that these TiO sub 2 nanowires crystallize in the anatase polycrystalline structure. The optical absorption band edge of TiO sub 2 nanowire arrays exhibits a blue shift with respect of that of the bulk TiO sub 2 owing to the quantum size effect.

  11. The mechanical reliability of alumina scales and coatings

    Energy Technology Data Exchange (ETDEWEB)

    Alexander, K.B.; Pruebner, K.; Tortorelli, P.F. [Oak Ridge National Lab., TN (United States)

    1996-08-01

    The mechanical integrity of oxide scales ultimately determines their ability to protect materials from corrosion and other environmental effects arising from deleterious reactions with gases and condensable products. The microstructure and mechanical behavior of alumina products thermally grown or deposited on Fe-28 at.% Al intermetallic alloys are being characterized in order to develop the knowledge and means to control the mechanical reliability of alumina scales by microstructural manipulation through design and processing. Mechanical characterization involved gravimetric data from cyclic oxidation experiments, in-situ observation of oxidized specimens undergoing flexural loading in a scanning electron microscope, and measurements of hardness, elastic modulus and cracking resistance by nanoindentation. Values of cracking thresholds for Al{sub 2}O{sub 3} scales were consistent with other measurements for surface and bulk alumina. The oxidation behavior of Fe{sub 3}Al alloys coated with a thin (0.5 - 1 {mu}m) alumina film deposited by plasma synthesis has been studied. During exposure in the oxidizing environment, new oxide was formed between the coating and the substrate. The presence of the deposited amorphous oxide inhibited the subsequent thermal oxidation of the metal. Because the thermally grown alumina forms under the deposit, the adherence of the coating is controlled by the strength of the metal/oxide interface that develops during oxidation.

  12. Plasma Processes : Plasma sprayed alumina coatings for radiation detector development

    Indian Academy of Sciences (India)

    Mary Alex; V Balagi; K R Prasad; K P Sreekumar; P V Ananthapadmanabhan

    2000-11-01

    Conventional design of radiation detectors uses sintered ceramic insulating modules. The major drawback of these ceramic components is their inherent brittleness. Ion chambers, in which these ceramic spacers are replaced by metallic components with plasma spray coated alumina, have been developed in our Research Centre. These components act as thin spacers that have good mechanical strength as well as high electrical insulation and replace alumina insulators with the same dimensions. As a result, the design of the beam loss monitor ion chamber for CAT could be simplified by coating the outer surface of the HT electrode with alumina. One of the chambers developed for isotope calibrator for brachytherapy gamma sources has its outer aluminium electrode (60 mm dia × 220 mm long) coated with 250 thick alumina (97%) + titania (3%). In view of potential applications in neutron-sensitive ion chambers used in reactor control instrumentation, studies were carried out on alumina 100 to 500 thick coatings on copper, aluminium and SS components. The electrical insulation varied from 108 ohms to 1012 ohms for coating thicknesses above 200 . The porosity in the coating resulted in some fall in electrical insulation due to moisture absorption. An improvement could be achieved by providing the ceramic surface with moisture-repellent silicone oil coating. Irradiation at Apsara reactor core location showed that the coating on aluminium was found to be unaffected after exposure to 1017 nvt fluence.

  13. Peltier heats in cryolite melts with alumina

    Energy Technology Data Exchange (ETDEWEB)

    Flem, B.E.; Ratkje, S.K.; Sterten, A. [Univ. of Trondheim (Norway)

    1996-10-01

    The Seebeck coefficient was measured for cells with electrolytes of molten mixtures of sodium fluoride and aluminum fluoride saturated with alumina. The electrodes were either a pair of oxygen electrodes or a pair of aluminum electrodes. For the molar ratio NaF/AlF{sub 3} equal to 1.8, 1.2 and 1.0, the authors obtained the Seebeck coefficients {minus}1.80 mV K{sup {minus}1} at 971 C, {minus}1.63 mV K{sup {minus}1} at 813.6 C and {minus}0.583 mV K{sup {minus}1} at 758 C, respectively, for the oxygen electrodes. For the aluminum electrodes, the authors obtained the Seebeck coefficient {minus}1.23 mV K{sup {minus}1} at 962 C, for the molar ratio NaF/AlF{sub 3} equal to 1.8. The results suggest that there is a substantial reversible heat consumption at the anode during aluminum electrolysis and a large reversible heat production at the cathode. The highest temperature in the Hall-Heroult cell is then closer to the cathode than the anode. The transported entropies of Al{sup 3+} and O{sup 2{minus}} were calculated to be 77 J mol{sup {minus}1} K{sup {minus}1} and 10 J mol{sup {minus}1} K{sup {minus}1}, respectively, when the molar ratio NaF/AlF{sub 3} was equal to 1.0.

  14. Challenges in Additive Manufacturing of Alumina

    Science.gov (United States)

    Gonzalez, Hugo

    Additive manufacturing is seen by many as the holy grail of manufacturing, the ability to produce parts nearly autonomously. Adding material rather than removing it would eliminate the need for expensive resources and machining. The recent expiration of key 3D printing patents has led to many advances in the field and has dramatically lowered the prices of 3D printers, making them accessible to the average individual. The one area where additive manufacturing is still in its infancy is in ceramics. Ceramic materials have advantages over polymers and metals such as corrosion resistance, insulating behavior, high stiffness and high temperature stability that make them attractive in industries such as aerospace, medical, and electronics. Processing and machining ceramics however is difficult and expensive as it requires high temperature furnaces and diamond tooling. There are currently two companies that produce printers capable of printing technical ceramics, Lithoz in Germany and 3D Ceram in France. The issue is that both of these printers retail for over $100,000. The work in this thesis intends to show the challenges associated with setting up a ceramic 3D printer at a fraction of that cost for 3D printing of alumina. The first such challenge was creating a photopolymer resin that could be loaded with a large volume percent of aluminum oxide powder while maintain its curability and low viscosity. Several combinations of monomers and dispersants were evaluated before coming to the conclusion that the use of a hexanediol diacrylate monomer and quarternary ammonia acetate were the most effective in suspending volume sold loadings of over 40% while maintaining a low viscosity. The next challenge was adapting an inexpensive polymer printer to use the powder loaded resin. Various printer parameters were modified and different window coatings were implemented to create a print. The issue of the layers curing on the build area window however, proved to be difficult to

  15. Grain boundaries analysis in polycrystalline silicon by TEM

    Energy Technology Data Exchange (ETDEWEB)

    Komninou, F.; Karakostas, T.; Bleris, G.L.; Economou, N.A. (Aristoteles University, Thessaloniki (Greece))

    1982-01-01

    Polycrystalline Si interfaces were examined within the CSL's approach. The rotation relationship of every bicrystal has been analyzed with the technique of the instrumental system and the small angle description has been used for the CSL characterization. The most frequently occuring descriptions are CSL' ..sigma..=3 coherent and incoherent twins, the later being microscopically coherent. Cases of multiple boundaries were also examined and interelations were found between low or high angle boundaries for CSL's with ..sigma..>3. A special case of interest is a ..sigma..=39 CSL which is formed from a combination of ..sigma..=13b and ..sigma..=3 and is a triclinic CSL lacking 180/sup 0/ rotational operations. The results presented indicate that for polycrystalline Si the CSL model could be used in describing the interfaces occuring.

  16. New multiphase equation of state for polycrystalline quartz

    Energy Technology Data Exchange (ETDEWEB)

    Boettger, J.C.; Lyon, S.P.

    1990-10-01

    We have generated separate equations of state (EOS's) for the alpha quartz, coesite, and stishovite phases of polycrystalline quartz (SiO{sub 2}) using the computer program GRIZZLY. We also modified the program GRIZZLY to combine two single-phase EOS's for a given material into a single two-phase EOS via minimization of the Gibbs free energy. This new version of GRIZZLY has been used to generate a three-phase SESAME type EOS for polycrystalline quartz using the three EOS's mentioned above. All four of the EOS's produced for SiO{sub 2} are now available on request. 17 refs., 4 figs., 1 tab.

  17. Nucleation and growth of polycrystalline SiC

    DEFF Research Database (Denmark)

    Kaiser, M.; Schimmel, S.; Jokubavicius, V.

    2014-01-01

    R polytypes. It is found that pyrolytic graphite results in enhanced texturing of the nucleating gas species. Reducing the pressure leads to growth of the crystallites until a closed polycrystalline SiC layer containing voids with a rough surface is developed. Bulk growth was conducted at 35 mbar Ar...... pressure at 2250°C in diffusion limited mass transport regime generating a convex shaped growth form of the solid-gas interface leading to lateral expansion of virtually [001] oriented crystallites. Growth at 2350°C led to the stabilization of 6H polytypic grains. The micropipe density in the bulk strongly......The nucleation and bulk growth of polycrystalline SiC in a 2 inch PVT setup using isostatic and pyrolytic graphite as substrates was studied. Textured nucleation occurs under near-thermal equilibrium conditions at the initial growth stage with hexagonal platelet shaped crystallites of 4H, 6H and 15...

  18. Fabrication of alumina films with laminated structures by ac anodization

    Directory of Open Access Journals (Sweden)

    Hiroyo Segawa

    2014-01-01

    Full Text Available Anodization techniques by alternating current (ac are introduced in this review. By using ac anodization, laminated alumina films are fabricated. Different types of alumina films consisting of 50–200 nm layers were obtained by varying both the ac power supply and the electrolyte. The total film thickness increased with an increase in the total charge transferred. The thickness of the individual layers increased with the ac voltage; however, the anodization time had little effect on the film thickness. The laminated alumina films resembled the nacre structure of shells, and the different morphologies exhibited by bivalves and spiral shells could be replicated by controlling the rate of increase of the applied potentials.

  19. Origin of High-Alumina Basalt, Andesite, and Dacite Magmas.

    Science.gov (United States)

    Hamilton, W

    1964-10-30

    The typical volcanic rocks of most island arcs and eugeosynclines, and of some continental environments, are basalt, andesite, and dacite, of high alumina content. The high-alumina basalt differs from tholeiitic basalt primarily in having a greater content of the components of calcic plagioclase. Laboratory data indicate that in the upper mantle, below the level at which the basaltic component of mantle rock is transformed by pressure to eclogite or pyroxenite, the entire basaltic portion probably is melted within a narrow temperature range, but that above the level of that transformation plagioclase is melted selectively before pyroxene over a wide temperature range. The broad spectrum of high-alumina magmas may represent widely varying degrees of partial melting above the transformation level, whereas narrow-spectrum tholeiite magma may represent more complete melting beneath it.

  20. Alumina Template-Dependant Growth of Cobalt Nanowire Arrays

    Directory of Open Access Journals (Sweden)

    L. Malferrari

    2009-01-01

    Full Text Available Different electrochemical regimes and porous alumina were applied for template synthesis of cobalt nanowire (nw arrays, revealing several peculiar cases. In contrast to quite uniform filling of sulfuric acid alumina templates by alternating current deposition, nonuniform growth of the Co nw tufts and mushrooms was obtained for the case of oxalic acid templates. We showed herein for the first time that such configurations arise from the spontaneous growth of cobalt nw groups evolving from the cobalt balls at the Al/alumina interface. Nevertheless, the uniform growth of densely packed cobalt nw arrays, up to tens of micrometers in length, was obtained via long-term direct current galvanostatic deposition at low current density using oxalic acid templates one-side coated by conducting layer. The unique point of this regime is the formation of hexagonal lattice Co nws with a preferred (100 growth direction.

  1. Pressureless sintering behavior of injection molded alumina ceramics

    Directory of Open Access Journals (Sweden)

    Liu W.

    2014-01-01

    Full Text Available The pressureless sintering behaviors of two widely used submicron alumina (MgOdoped and undoped with different solid loadings produced by injection molding have been studied systematically. Regardless of the sinterability of different powders depending on their inherent properties, solid loading plays a critical role on the sintering behavior of injection molded alumina, which greatly determines the densification and grain size, and leads to its full densification at low temperatures. As compared to the MgO-doped alumina powder, the undoped specimens exhibit a higher sinterability for its smaller particle size and larger surface area. While full densification could be achieved for MgO-doped powders with only a lower solid loading, due to the fact that MgO addition can reduce the detrimental effect of the large pore space on the pore-boundary separation.

  2. Thermal and Electrical Characterization of Alumina Substrate for Microelectronic Applications

    Science.gov (United States)

    Ahmad, S.; Ibrahim, A.; Alias, R.; Shapee, S. M.; Ambak, Z.; Zakaria, S. Z.; Yahya, M. R.; Mat, A. F. A.

    2010-03-01

    This paper reports the effect of sintering temperature on thermal and electrical properties of alumina material as substrate for microelectronic devices. Alumina materials in the form of green sheet with 1 mm thickness were sintered at 1100° C, 1300° C and 1500° C for about 20 hours using heating and cooling rates of 2° C/min. The densities were measured using densitometer and the microstructures of the samples were analyzed using SEM micrographs. Meanwhile thermal and electrical properties of the samples were measured using flash method and impedance analyzer respectively. It was found that thermal conductivity and thermal diffusivity of the substrate increases as sintering temperature increases. It was found also that the dielectric constant of alumina substrate increases as the sintering temperature increases.

  3. Energy transfer in porous anodic alumina/rhodamine 110 nanocomposites

    Energy Technology Data Exchange (ETDEWEB)

    Elhouichet, H., E-mail: habib.elhouichet@fst.rnu.tn [Laboratoire de Physico-Chimie des Materiaux Mineraux et leurs Applications, Centre National de Recherches en Sciences des Materiaux, B.P. 95, Hammam-Lif 2050 (Tunisia); Departement de Physique, Faculte des Sciences de Tunis, University of Tunis Elmanar 2092 Tunis (Tunisia); Harima, N.; Koyama, H. [Hyogo University of Teacher Education, Kato, Hyogo 673-1494 (Japan); Gaponenko, N.V. [Belarusian State University of Informatics and Radioelectronics, P. Browki St. 6, 220013 Minsk (Belarus)

    2012-09-15

    We have used porous anodic alumina (PAA) films as templates for embedding rhodamine 110 (Rh110) molecules and examined their photoluminescence (PL) properties in detail. The analysis of the polarization memory (PM) of PL strongly suggests that there is a significant energy transfer from PAA to Rh110 molecules. The effect of annealing the PAA layer on the PL properties of the nanocomposite has been studied. The results show that the energy transfer becomes more efficient in annealed PAA. - Highlights: Black-Right-Pointing-Pointer Porous anodic alumina-rhodamine 110 nanocomposites are elaborated. Black-Right-Pointing-Pointer Efficient energy transfer from the host to Rh110 molecules is evidenced from measurements of photoluminescence and degree of polarization memory spectra. Black-Right-Pointing-Pointer Thermal annealing of porous anodic alumina can improve the process of excitation transfer.

  4. Porous Alumina as a Promising Biomaterial for Public Health.

    Science.gov (United States)

    Bragazzi, Nicola Luigi; Gasparini, Roberto; Amicizia, Daniela; Panatto, Donatella; Larosa, Claudio

    2015-01-01

    Porous aluminum is a nanostructured material characterized by unique properties, such as chemical stability, regular uniformity, dense hexagonal porous lattice with high aspect ratio nanopores, excellent mechanical strength, and biocompatibility. This overview examines how the structure and properties of porous alumina can be exploited in the field of public health. Porous alumina can be employed for fabricating membranes and filters for bioremediation, water ultrafiltration, and microfiltration/nanofiltration, being a promising technique for having clean and fresh water, which is essential for human health. Porous alumina-based nanobiosensor coated with specific antibodies or peptides seem to be a useful tool to detect and remove pathogens both in food and in water, as well as for environmental monitoring. Further, these applications, being low-energy demanding and cost-effective, are particularly valuable in resource-limited settings and contexts, and can be employed as point of use devices in developing countries, where there is an urgent need of hygiene and safety assurance.

  5. Modifying alumina red mud to support a revegetation cover

    Science.gov (United States)

    Xenidis, A.; Harokopou, A. D.; Mylona, E.; Brofas, G.

    2005-02-01

    Alumina red mud, a fine-textured, iron-rich, alkaline residue, is the major waste product of bauxite digestion with caustic soda to remove alumina. The high alkalinity and salinity as well as the poor nutrient status are considered to be the major constraints of red mud revegetation. This research was conducted to evaluate the ameliorating effect of gypsum, sewage sludge, ferrous sulfate, ammonium sulfate, ammonium nitrate, and calcium phosphate on alumina red mud. The effectiveness of the mixtures was evaluated by applying extraction tests and performing experiments using six plant species. Gypsum amendment significantly reduced the pH, electrical conductivity, and sodium and aluminum content of red mud. Sewage sludge application had an extended effect in improving both the soil structure and the nutrient status of the gypsum-amended red mud. Together with the gypsum and sewage sludge, calcium phosphate application into red mud enhanced plant growth and gave the most promising results.

  6. Leakage current measurements of a pixelated polycrystalline CVD diamond detector

    OpenAIRE

    Zain, R.M.; Maneuski, D.; O'Shea, V.; Bates, R.; Blue, A.; Cunnigham, L.; Stehl, C.; Berderman, E.; Rahim, R. A.

    2013-01-01

    Diamond has several desirable features when used as a material for radiation detection. With the invention of synthetic growth techniques, it has become feasible to look at developing diamond radiation detectors with reasonable surface areas. Polycrystalline diamond has been grown using a chemical vapour deposition (CVD) technique by the University of Augsburg and detector structures fabricated at the James Watt Nanofabrication Centre (JWNC) in the University of Glasgow in order to produce pi...

  7. Cell and band structures in cold rolled polycrystalline copper

    DEFF Research Database (Denmark)

    Ananthan, V.S.; Leffers, Torben; Hansen, Niels

    1991-01-01

    The effect of plastic strain on the deformation microstructure has been investigated in polycrystalline copper rolled at room temperature to 5, 10, 20, and 30% reduction in thickness equivalent strain 0.06-0.42). Results from transmission electron microscopy (TEM) observations show that dense...... on {111}. Finally, the evolution of the deformation microstructure in copper is compared with that observed in other face centred cubic metals, especially aluminium....

  8. Modified Sachs's Model of Deformation of Polycrystalline Magnesium

    Science.gov (United States)

    Kesarev, A. G.; Vlasova, A. M.

    2017-09-01

    There are a large number of approaches to a description of work hardening of metal polycrystals with various crystal lattices. In the present work, Sachs's model is generalized to uniaxial tension/compression of polycrystalline magnesium with hexagonal densely packed crystal lattice. The tensile yield stress is estimated taking into account two deformation modes: (0001) easy basal slip and (10\\overline{1}2) twinning.

  9. Rotary Ultrasonic Machining of Poly-Crystalline Cubic Boron Nitride

    OpenAIRE

    2014-01-01

    Poly-crystalline cubic boron nitride (PCBN) is one of the hardest material. Generally, so hard materials could not be machined by conventional machining methods. Therefore, for this purpose, advanced machining methods have been designed. Rotary ultrasonic machining (RUM) is included among them. RUM is based on abrasive removing mechanism of ultrasonic vibrating diamond particles, which are bonded on active part of rotating tool. It is suitable especially for machining hard and brittle materia...

  10. EBIC AND DLTS MEASUREMENTS OF SI-AND POLYCRYSTALLINE SILICON

    OpenAIRE

    Bary, A.; Hamet, J.; Ihlal, A.; Chermant, J.; Nouet, G.

    1988-01-01

    Influence of grain boundaries on the electronic properties of silicon has been studied by electron-beam induced current (EBIC), thermally stimulated capacitance (TSCAP) and deep-level transient spectroscopy (DLTS). Low-angle grain boundaries taken from as-grown polycrystalline wafers for solar cells have been analyzed by EBIC and their behaviors have been compared after the junction diffusion treatment. This treatment gives a decrease of the local diffusion length and recombination velocity o...

  11. Effect of different sources of alumina on the microstructure and mechanical properties of the triaxial porcelain

    OpenAIRE

    Gralik,G.; Chinelattot,A. L.; A. S. A. Chinelatto

    2014-01-01

    Porcelains composed of kaolin-quartz-feldspar are called triaxial porcelains. The use of alumina as a substitute for quartz in porcelains has been developed for some time. The results show a significant improvement in their mechanical properties, but alumina has a high cost. The possibility of using alternative materials as a source of alumina with lower cost was investigated. In this work, alternative raw materials were used as a source of alumina: refractory bauxite, primary aluminum hydrox...

  12. Polycrystalline silicon availability for photovoltaic and semiconductor industries

    Science.gov (United States)

    Ferber, R. R.; Costogue, E. N.; Pellin, R.

    1982-01-01

    Markets, applications, and production techniques for Siemens process-produced polycrystalline silicon are surveyed. It is noted that as of 1982 a total of six Si materials suppliers were servicing a worldwide total of over 1000 manufacturers of Si-based devices. Besides solar cells, the Si wafers are employed for thyristors, rectifiers, bipolar power transistors, and discrete components for control systems. An estimated 3890 metric tons of semiconductor-grade polycrystalline Si will be used in 1982, and 6200 metric tons by 1985. Although the amount is expected to nearly triple between 1982-89, research is being carried out on the formation of thin films and ribbons for solar cells, thereby eliminating the waste produced in slicing Czolchralski-grown crystals. The free-world Si production in 1982 is estimated to be 3050 metric tons. Various new technologies for the formation of polycrystalline Si at lower costs and with less waste are considered. New entries into the industrial Si formation field are projected to produce a 2000 metric ton excess by 1988.

  13. Polycrystalline diamond detectors with three-dimensional electrodes

    Energy Technology Data Exchange (ETDEWEB)

    Lagomarsino, S., E-mail: lagomarsino@fi.infn.it [University of Florence, Department of Physics, Via Sansone 1, 50019 Sesto Fiorentino (Italy); INFN Firenze, Via B. Rossi 1, 50019 Sesto Fiorentino (Italy); Bellini, M. [INO-CNR Firenze, Largo E. Fermi 6, 50125 Firenze (Italy); Brianzi, M. [INFN Firenze, Via B. Rossi 1, 50019 Sesto Fiorentino (Italy); Carzino, R. [Smart Materials-Nanophysics, Istituto Italiano di Tecnologia, Genova, Via Morego 30, 16163 Genova (Italy); Cindro, V. [Joseph Stefan Institute, Jamova Cesta 39, 1000 Ljubljana (Slovenia); Corsi, C. [University of Florence, Department of Physics, Via Sansone 1, 50019 Sesto Fiorentino (Italy); LENS Firenze, Via N. Carrara 1, 50019 Sesto Fiorentino (Italy); Morozzi, A.; Passeri, D. [INFN Perugia, Perugia (Italy); Università degli Studi di Perugia, Dipartimento di Ingegneria, via G. Duranti 93, 06125 Perugia (Italy); Sciortino, S. [University of Florence, Department of Physics, Via Sansone 1, 50019 Sesto Fiorentino (Italy); INFN Firenze, Via B. Rossi 1, 50019 Sesto Fiorentino (Italy); Servoli, L. [INFN Perugia, Perugia (Italy)

    2015-10-01

    The three-dimensional concept in diamond detectors has been applied, so far, to high quality single-crystal material, in order to test this technology in the best available conditions. However, its application to polycrystalline chemical vapor deposited diamond could be desirable for two reasons: first, the short inter-electrode distance of three-dimensional detectors should improve the intrinsically lower collection efficiency of polycrystalline diamond, and second, at high levels of radiation damage the performances of the poly-crystal material are not expected to be much lower than those of the single crystal one. We report on the fabrication and test of three-dimensional polycrystalline diamond detectors with several inter-electrode distances, and we demonstrate that their collection efficiency is equal or higher than that obtained with conventional planar detectors fabricated with the same material. - Highlights: • Pulsed laser fabrication of polycristalline diamond detectors with 3D electrodes. • Measurement of the charge collection efficiency (CCE) under beta irradiation. • Comparation between the CCE of 3D and conventional planar diamond sensors. • A rationale for the behavior of three-dimensional and planar sensors is given.

  14. Physics of grain boundaries in polycrystalline photovoltaic semiconductors

    Energy Technology Data Exchange (ETDEWEB)

    Yan, Yanfa, E-mail: yanfa.yan@utoledo.edu; Yin, Wan-Jian; Wu, Yelong; Shi, Tingting; Paudel, Naba R. [Department of Physics and Astronomy and Wright Center for Photovoltaics Innovation and Commercialization, The University of Toledo, Ohio 43606 (United States); Li, Chen [Materials Science and Technology Division, Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831 (United States); Poplawsky, Jonathan [The Center for Nanophase Materials Sciences, Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831 (United States); Wang, Zhiwei [Department of Physics and Astronomy and Wright Center for Photovoltaics Innovation and Commercialization, The University of Toledo, Ohio 43606 (United States); National Renewable Energy Laboratory, Golden, Colorado 80401 (United States); Moseley, John; Guthrey, Harvey; Moutinho, Helio; Al-Jassim, Mowafak M. [National Renewable Energy Laboratory, Golden, Colorado 80401 (United States); Pennycook, Stephen J. [Department of Materials Science and Engineering, University of Tennessee, Knoxville, Tennessee 37996 (United States)

    2015-03-21

    Thin-film solar cells based on polycrystalline Cu(In,Ga)Se{sub 2} (CIGS) and CdTe photovoltaic semiconductors have reached remarkable laboratory efficiencies. It is surprising that these thin-film polycrystalline solar cells can reach such high efficiencies despite containing a high density of grain boundaries (GBs), which would seem likely to be nonradiative recombination centers for photo-generated carriers. In this paper, we review our atomistic theoretical understanding of the physics of grain boundaries in CIGS and CdTe absorbers. We show that intrinsic GBs with dislocation cores exhibit deep gap states in both CIGS and CdTe. However, in each solar cell device, the GBs can be chemically modified to improve their photovoltaic properties. In CIGS cells, GBs are found to be Cu-rich and contain O impurities. Density-functional theory calculations reveal that such chemical changes within GBs can remove most of the unwanted gap states. In CdTe cells, GBs are found to contain a high concentration of Cl atoms. Cl atoms donate electrons, creating n-type GBs between p-type CdTe grains, forming local p-n-p junctions along GBs. This leads to enhanced current collections. Therefore, chemical modification of GBs allows for high efficiency polycrystalline CIGS and CdTe thin-film solar cells.

  15. Magnetostriction of permalloy epitaxial and polycrystalline thin films

    Directory of Open Access Journals (Sweden)

    Futamoto Masaaki

    2013-01-01

    Full Text Available Permalloy epitaxial films of (111, (100, and (110 orientations and a polycrystalline thin film are prepared. Sinusoidal waveforms of magnetostriction are observed when the polycrystalline and the (111oriented epitaxial films are measured under rotating magnetic fields ranging from 10 to 1000 Oe. On the contrary, the (100- and the (110-oriented films, respectively, show a triangle waveform and a waveform consisting of a mixture of triangular and sinusoidal shapes under low magnetic fields. The waveform variation is interpreted by considering the magnetization structure of magnetically unsaturated film with an in-plane magnetic symmetry related with the crystallographic orientation. The waveforms deformed from sinusoidal shape vary to sinusoidal with increasing the magnetic field. Magnetically saturated (100- and (110-oriented films show sinusoidal waveforms. The saturated magnetostriction values are determined as ʎs = 5 × 10–6, 4 × 10–6, 3 × 10–6, and 6 × 10–6 for the (111, the (100, the (110 epitaxial and the polycrystalline films, respectively.

  16. Effect of Filler Composition on the Brazing of Alumina to Copper Using Ultrasonic Wave

    Institute of Scientific and Technical Information of China (English)

    Khalid M. HAFEZ; Masaaki NAKA

    2003-01-01

    An ultrasonic wave was applied during brazing of alumina to Cu. First alumina was metallized by applying ultrasonicwave in braze bath. Then the metallized alumina was brazed with Cu using the same filler alloy. The filler used wereZn-Al alloys and Zn-Sn A

  17. Cylindrical Three-Dimensional Porous Anodic Alumina Networks

    Directory of Open Access Journals (Sweden)

    Pedro M. Resende

    2016-11-01

    Full Text Available The synthesis of a conformal three-dimensional nanostructure based on porous anodic alumina with transversal nanopores on wires is herein presented. The resulting three-dimensional network exhibits the same nanostructure as that obtained on planar geometries, but with a macroscopic cylindrical geometry. The morphological analysis of the nanostructure revealed the effects of the initial defects on the aluminum surface and the mechanical strains on the integrity of the three-dimensional network. The results evidence the feasibility of obtaining 3D porous anodic alumina on non-planar aluminum substrates.

  18. Atomistic force field for alumina fit to density functional theory.

    Science.gov (United States)

    Sarsam, Joanne; Finnis, Michael W; Tangney, Paul

    2013-11-28

    We present a force field for bulk alumina (Al2O3), which has been parametrized by fitting the energies, forces, and stresses of a large database of reference configurations to those calculated with density functional theory (DFT). We use a functional form that is simpler and computationally more efficient than some existing models of alumina parametrized by a similar technique. Nevertheless, we demonstrate an accuracy of our potential that is comparable to those existing models and to DFT. We present calculations of crystal structures and energies, elastic constants, phonon spectra, thermal expansion, and point defect formation energies.

  19. Controllable synthesis and characterization of alumina/MWNT nanocomposites

    Energy Technology Data Exchange (ETDEWEB)

    Nemeth, Zoltan; Hernadi, Klara [Department of Applied and Environmental Chemistry, University of Szeged, Rerrich Bela ter 1, 6720 Szeged (Hungary); Marko, Kata; Erdohelyi, Andras [Department of Physical Chemistry and Material Science, University of Szeged, Aradi ter 2, 6720 Szeged (Hungary); Forro, Laszlo [Laboratory of Physics of Complex Matter, IPMC, EPFL, 1026 Ecublens (Switzerland)

    2011-11-15

    The aim of this work is to develop a controllable synthesis pathway which produces a stable alumina layer on the surface of carbon nanotubes by impregnation method. Precursor compounds such as aluminium isopropoxide and aluminium-acetyl-acetonate were used to cover the surface of multiwalled carbon nanotubes (MWNTs) under different solvent conditions. As-prepared alumina coverages were characterized by TEM, SEM, SEM-EDX, TG and X-ray diffraction techniques. Results revealed that homogeneous coverage can be achieved in a controllable way. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  20. Mechanical properties of tricalcium phosphate-alumina composites

    Science.gov (United States)

    Sakka, S.; Ben Ayed, F.; Bouaziz, J.

    2012-02-01

    Tricalcium phosphate and alumina powder were mixed in order to elaborate biphasic ceramics composites. This study deals to produce bioceramics composites sintered at various temperatures for differents times. The characterization of samples, before and after the sintering process was investigated, using X-Ray diffraction, scanning electronic microscopy, 31P and 27Al nuclear magnetic resonance and differential thermal analysis. Mechanical properties of biphasic composites were studied using Brazilian test. The tricalcium phosphate - 75 wt% alumina composites mechanical resistance increased with sintered temperature. The mechanical resistance reach it's optimum value (8.6 MPa) at 1550°C for two hours.

  1. CRACK PROPAGATION BEHAVIOR AND LIFETIME PREDICTION IN ALUMINA AND ZIRCONIA

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The lifetime prediction of ceramics is discussed on the basis of the relationship between stress intensity factor KI and crack velocity v. The effects of water environment, the cyclic loading and microstructure of material on KI-v characteristics are studied by carrying out the crack growth tests by the double torsion (DT) method under the static and cyclic loading in both environments of air and water for alumina and zirconia. KI-v characteristics determined by the double torsion method are used to predict time-to-failure under the cyclic loading of alumina and zirconia ceramics. The predictions agree qualitatively with the experimental results.

  2. Advanced powder processing

    Energy Technology Data Exchange (ETDEWEB)

    Janney, M.A. [Oak Ridge National Lab., TN (United States)

    1997-04-01

    Gelcasting is an advanced powder forming process. It is most commonly used to form ceramic or metal powders into complex, near-net shapes. Turbine rotors, gears, nozzles, and crucibles have been successfully gelcast in silicon nitride, alumina, nickel-based superalloy, and several steels. Gelcasting can also be used to make blanks that can be green machined to near-net shape and then high fired. Green machining has been successfully applied to both ceramic and metal gelcast blanks. Recently, the authors have used gelcasting to make tooling for metal casting applications. Most of the work has centered on H13 tool steel. They have demonstrated an ability to gelcast and sinter H13 to near net shape for metal casting tooling. Also, blanks of H13 have been cast, green machined into complex shape, and fired. Issues associated with forming, binder burnout, and sintering are addressed.

  3. Polycrystalline silicon study: Low-cost silicon refining technology prospects and semiconductor-grade polycrystalline silicon availability through 1988

    Science.gov (United States)

    Costogue, E. N.; Ferber, R.; Lutwack, R.; Lorenz, J. H.; Pellin, R.

    1984-01-01

    Photovoltaic arrays that convert solar energy into electrical energy can become a cost effective bulk energy generation alternative, provided that an adequate supply of low cost materials is available. One of the key requirements for economic photovoltaic cells is reasonably priced silicon. At present, the photovoltaic industry is dependent upon polycrystalline silicon refined by the Siemens process primarily for integrated circuits, power devices, and discrete semiconductor devices. This dependency is expected to continue until the DOE sponsored low cost silicon refining technology developments have matured to the point where they are in commercial use. The photovoltaic industry can then develop its own source of supply. Silicon material availability and market pricing projections through 1988 are updated based on data collected early in 1984. The silicon refining industry plans to meet the increasing demands of the semiconductor device and photovoltaic product industries are overviewed. In addition, the DOE sponsored technology research for producing low cost polycrystalline silicon, probabilistic cost analysis for the two most promising production processes for achieving the DOE cost goals, and the impacts of the DOE photovoltaics program silicon refining research upon the commercial polycrystalline silicon refining industry are addressed.

  4. Substrate-induced coagulation (SIC) of nano-disperse alumina in non-aqueous media: The dispersibility and stability of alumina in N-methyl-2-pyrrolidinone

    OpenAIRE

    Basch, Angelika; Strnad, Simona

    2011-01-01

    This work investigated colloidal properties such as the zeta-potential, the electrophoretic mobilities and the wetting behaviour of alumina dispersed in non-aqueous media. Non-aqueous dispersions of alumina were prepared in the solvent N-methyl-2-pyrrolidinone (NMP). The wetting behaviour of alumina in NMP was characterized by the powder contact angle method and the Wilhemy plate method. The behaviour of the dispersion should provide information for the development of a substrate-induced coag...

  5. Effect of La2O3 on Microstructure and Transmittance of Transparent Alumina Ceramics

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Optically transparent alumina ceramics were fabricated by conventional process and sintered without pressure in H2 atmosphere. The results indicate that relative densities of alumina specimens increase to theoretical densities (T.D.) with increasing content of La2O3. With increasing holding time during sintering, much less pores and larger grains were found in the sintered alumina samples. Higher transmittance was achieved in alumina codoped with MgO and La2O3 as compared with that doped with MgO only. The total-transmittance of alumina sample is up to 86% at a wavelength range of 300~800 nm.

  6. A General Procedure for Surface Modification of Nano-alumina and Its Application to Dendrimers

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    A general procedure for surface modification of nano-alumina using N, N'-dicyclohexyl-carbodiimide (DCC) mediated amidation is reported. Aliphatic and aromatic carboxylic acids reacted smoothly with nano-alumina pretreated with 3-aminopropyltriethoxysilane in the presence of DCC, giving modified aluminas having organic surfaces. The grafted aluminas have been characterized qualitatively by FT-IR or 13C CPMAS NMR spectroscopy, and quantitatively by thermogravimetric analysis and elemental analysis. The procedure was applied to polyether dendrons bearing carboxyl groups at the focal points, giving successful grafting of dendrimers onto nano-alumina.

  7. Joining between alumina and metal by use of plasma sprayed Ni-Al coating on alumina. Alumina ni plasma yoshashita Ni-Al kinzoku himaku wo kaishite no alumina kinzoku tono setsugo

    Energy Technology Data Exchange (ETDEWEB)

    Murakami, N.; Kishitake, K.; Hasebe, M.; Kobayashi, T.; Murashige, K. (Kyushu Institute of Technology, Kitakyushu (Japan). Faculty of Engineering)

    1993-06-30

    A ceramic material is joined and compounded with a metal by spraying another metal on the ceramic material, and then joined with the intended metal because of small adhesion strength in both materials. Adhesion strength of the spraying metal is important even in this case. The present experiment performed plasma spraying of Ni-Al mixed powder on alumina to investigate effects of the heating on the adhesion strength. Solder joining of Ni-Al sprayed alumina with soft steel rod and copper rod was also tested. As a result, the adhesion strength of as-sprayed Ni-Al film on the alumina was about 5 MPa and maximum of 10 MPa. Heating the materials to 1173 K for 10 hours or longer provided an average strength of 20 MPa and a maximum strength of 35 MPa. Improving the adhesion strength requires spinel to be produced through reactions on the interface. It was found that alumina can be joined with metal easily by going through this film. 12 refs., 6 figs.

  8. Development of Cast Alumina-Forming Austenitic Stainless Steels

    Science.gov (United States)

    Muralidharan, G.; Yamamoto, Y.; Brady, M. P.; Walker, L. R.; Meyer, H. M., III; Leonard, D. N.

    2016-11-01

    Cast Fe-Ni-Cr chromia-forming austenitic stainless steels with Ni levels up to 45 wt.% are used at high temperatures in a wide range of industrial applications that demand microstructural stability, corrosion resistance, and creep strength. Although alumina scales offer better corrosion protection at these temperatures, designing cast austenitic alloys that form a stable alumina scale and achieve creep strength comparable to existing cast chromia-forming alloys is challenging. This work outlines the development of cast Fe-Ni-Cr-Al austenitic stainless steels containing about 25 wt.% Ni with good creep strength and the ability to form a protective alumina scale for use at temperatures up to 800-850°C in H2O-, S-, and C-containing environments. Creep properties of the best alloy were comparable to that of HK-type cast chromia-forming alloys along with improved oxidation resistance typical of alumina-forming alloys. Challenges in the design of cast alloys and a potential path to increasing the temperature capability are discussed.

  9. Laser-induced prenucleation of alumina for electroless plating

    NARCIS (Netherlands)

    Shrivastva, P.B.; Harteveld, C.; Boose, C.A.; Kolster, B.H.

    1991-01-01

    This paper deals with the deposition of palladium from decomposition of a thin palladium acetate layer on rough and porous alumina ceramic surfaces by irradiating it with a UV excimer laser. The palladium acetate layer was formed from a combination of propyl glycol methyl ether acetate solvent and p

  10. Development of Cast Alumina-Forming Austenitic Stainless Steels

    Science.gov (United States)

    Muralidharan, G.; Yamamoto, Y.; Brady, M. P.; Walker, L. R.; Meyer, H. M., III; Leonard, D. N.

    2016-09-01

    Cast Fe-Ni-Cr chromia-forming austenitic stainless steels with Ni levels up to 45 wt.% are used at high temperatures in a wide range of industrial applications that demand microstructural stability, corrosion resistance, and creep strength. Although alumina scales offer better corrosion protection at these temperatures, designing cast austenitic alloys that form a stable alumina scale and achieve creep strength comparable to existing cast chromia-forming alloys is challenging. This work outlines the development of cast Fe-Ni-Cr-Al austenitic stainless steels containing about 25 wt.% Ni with good creep strength and the ability to form a protective alumina scale for use at temperatures up to 800-850°C in H2O-, S-, and C-containing environments. Creep properties of the best alloy were comparable to that of HK-type cast chromia-forming alloys along with improved oxidation resistance typical of alumina-forming alloys. Challenges in the design of cast alloys and a potential path to increasing the temperature capability are discussed.

  11. Experiments on individual alumina-supported adatoms and clusters

    Science.gov (United States)

    Nilius, N.; Cörper, A.; Bozdech, G.; Ernst, N.; Freund, H.-J.

    2001-08-01

    To contribute to an understanding of growth conditions and electronic properties of metal clusters on technologically relevant oxides we have examined the mobility of individual, alumina-supported Pt-adatoms and the optical properties of single supported Ag-clusters. Using field-ion microscopy (FIM) we have prepared and imaged an individual Pt-adatom at approximately 40 K, both on the apex plane of a [1 1 0]-oriented NiAl tip and on a thin alumina film, grown on the same NiAl specimen by oxidation. On the alumina film, the onset temperature for Pt surface diffusion approaches 100 K being distinctively lower than the value 165 K measured on NiAl(1 1 0). Employing the tip of a scanning tunneling microscope (STM) as a local electron source, photon emission from individual, alumina-supported Ag-clusters was spectroscopically analyzed. The occurrence of a distinct emission line is explained by the decay of a collective electron oscillation (Mie-plasmon resonance). For decreasing Ag-cluster diameter, the emission lines (i) shift to higher energies and (ii) their widths increase. To explain these observations, we discuss (i) the reduced screening of the plasmon oscillation due to the Ag 4d electrons and (ii) an enhanced electron surface scattering rate in small clusters.

  12. Dynamical stability of the alpha and theta phases of alumina

    DEFF Research Database (Denmark)

    Lodziana, Zbigniew; Parlinski, K.

    2003-01-01

    Using density functional calculations the phonon dispersion relations, phonon density of states, and free energy of theta and alpha phases of alumina are investigated. The temperature dependence of the free energy indicates that entropy contributes to the destabilization of the alpha phase...

  13. Gas and surface diffusion in modified γ-alumina systems

    NARCIS (Netherlands)

    Uhlhorn, R.J.R.; Keizer, K.; Burggraaf, A.J.

    1989-01-01

    The transport of pure gases through a microporous membrane is described. The alumina-based membrane (pores 2.5-4 nm) is suitable for Knudsen diffusion separation. To improve the separation factor, interaction with and mobility on the pore wall of one of the gases of a mixture is necessary. To introd

  14. Capillary condensation in porous alumina observed by positronium lifetime spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Ivanov, Eugeniu [National Institute for Nuclear Physics and Engineering-Horia Hulubei, Atomistilor Street 407, CP MG 06, Magurele, Bucharest (Romania); Center for Advanced Studies in Physics of the Roumanian Academy, Casa Academiei Romane, Calea 13 Septembrie No. 13, Bucharest (Romania); Vata, Ion [National Institute for Nuclear Physics and Engineering-Horia Hulubei, Atomistilor Street 407, CP MG 06, Magurele, Bucharest (Romania)], E-mail: vata@ifin.nipne.ro; Toderian, Stefan; Dudu, Dorin; Rusen, Ion; Stefan, Nitisor [National Institute for Nuclear Physics and Engineering-Horia Hulubei, Atomistilor Street 407, CP MG 06, Magurele, Bucharest (Romania)

    2008-10-31

    The PALS method based on time distribution measurements has been used to study capillary condensation of different gases adsorbed in microporous alumina powder. The isotherms exhibit features which are associated with a shifted gas-liquid transition. The sorption and desorption processes are irreversible presenting a hysteresis effect. Suggestions on some new aspects of the capillary condensation dynamics are made.

  15. Structure and surface properties of praseodymium modified alumina

    Energy Technology Data Exchange (ETDEWEB)

    Tankov, I. [Institute of Catalysis, Bulgarian Academy of Sciences, 1113 Sofia (Bulgaria); Pawelec, B. [Instituto de Catalisis y Petroleoquimica, CSIC, Cantoblanco, 28049 Madrid (Spain); Arishtirova, K. [Institute of Catalysis, Bulgarian Academy of Sciences, 1113 Sofia (Bulgaria); Damyanova, S., E-mail: soniad@ic.bas.bg [Institute of Catalysis, Bulgarian Academy of Sciences, 1113 Sofia (Bulgaria)

    2011-10-15

    Mixed PrO{sub 2}-Al{sub 2}O{sub 3} oxides with different PrO{sub 2} content (1-20 wt.%) were prepared by wetness impregnation of {gamma}-alumina with aqueous solution of praseodymium nitrate. The samples were characterized by different techniques, using surface adsorption-desorption of N{sub 2} (S{sub BET}), thermogravimetric analysis (TGA), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), UV-vis diffuse reflectance spectroscopy (DRS), temperature-programmed reduction (TPR) and temperature-programmed desorption of CO{sub 2} (TPD-CO{sub 2}). TGA and XRD showed the presence of small praseodymium oxide species on the alumina surface. XPS and DRS detected electron deficient interaction between deposited praseodymium oxide and alumina. It was observed a lower reduction temperature for supported Pr oxide species compared to that of the bulk Pr{sub 6}O{sub 11}. TPD-CO{sub 2} studies suggested that the deposition of Pr oxide on alumina leaded to increase of the basicity of mixed oxides.

  16. Ionic Segregation on Grain Boundaries in Thermally Grown Alumina Scales

    Energy Technology Data Exchange (ETDEWEB)

    Pint, Bruce A [ORNL; Unocic, Kinga A [ORNL

    2012-01-01

    This study first examined segregation behaviour in the alumina scale formed after 100 h at 1100 C on bare and MCrAlYHfSi-coated single-crystal superalloys with {approx}10 ppma La and Y. For the bare superalloy, Hf and Ti were detected on the grain boundaries of the inner columnar alumina layer. Increasing the oxidation temperature to 1200 C for 2 h did not change the segregation behavior. With the bond coating, both Y and Hf were segregated to the grain boundaries as expected. However, there was evidence of Ti-rich oxide particles near the gas interface suggesting that Ti diffused from the superalloy through the coating. To further understand these segregation observations with multiple dopants, other alumina-forming systems were examined. Alumina scale grain boundary co-segregation of Ti with Y is common for FeCrAl alloys. Co-segregation of Hf and Ti was observed in the scale formed on co-doped NiAl. No La segregation was detected in the scale formed on NiCrAl with only a 19 ppma La addition, however, the scale was adherent.

  17. Osseointegration of alumina bioceramic granules: A comparative experimental study

    Science.gov (United States)

    Rerikh, V. V.; Avetisyan, A. R.; Zaydman, A. M.; Anikin, K. A.; Bataev, V. A.; Nikulina, A. A.; Sadovoy, M. A.; Aronov, A. M.; Semantsova, E. S.

    2016-08-01

    To perform a comparative analysis of osseointegration of bioceramic alumina-based granules, hydroxyapatite-based granules, and deproteinized bone granules. The experiment was conducted on 52 adult male Kyoto-Wistar rats weighing 350 to 520 g. The animals were divided into five matched groups that differed only in the type of an implanted material. The granules were implanted in the lumbar vertebral bodies and in the distal right femur of each laboratory animal. Two months after surgery, the animals were euthanized, followed by tissue sampling for morphological studies. An examination of specimens from the groups with implanted alumina granules revealed the newly formed trabecular bone with remodeling signs. The bone tissue filled the intragranular space, tightly adhering to the granule surface. There was no connective tissue capsule on the border between bone tissue and alumina granules. Cylindrical bioceramic alumina-based granules with an open internal channel have a higher strength surpassing than that of analogs and the osseointegration ability close to that of hydroxyapatite and deproteinized bone granules.

  18. Sol-gel based alumina powders with catalytic applications

    Science.gov (United States)

    Crişan, Maria; Zaharescu, Maria; Kumari, Valluri Durga; Subrahmanyam, Machiraju; Crişan, Dorel; Drăgan, Nicolae; Răileanu, Mălina; Jitianu, Mihaela; Rusu, Adriana; Sadanandam, Gullapelli; Krishna Reddy, Jakkidi

    2011-10-01

    The sol-gel process provides a new approach to the preparation of oxide materials and offers many advantages for making catalysts. Since homogeneous mixing can be achieved at the molecular scale, the chemical reactivity of the oxide surface can be greatly enhanced; thus powders with high surface area and optimized pore size distribution can be obtained at low temperatures. In the present work NiO/Al 2O 3 sol-gel catalysts were obtained by simultaneous gelation of aluminium isopropoxide and nickel nitrate. A comparative study with pure sol-gel alumina was also realized. By physical-structural studies the changes induced by the introduction of the Ni precursor, before and after aluminium alkoxide hydrolysis were highlighted. The introduction of Ni at the beginning of the reaction favors γ-Al 2O 3 crystallization. When Ni is added at the end of reaction, it delays the alumina crystallization and induces the disorder of the lattice. The obtained Ni doped sol-gel derived alumina has been used as catalyst in the finished form for glycerol reforming to generate H 2 for fuel cell applications. Some evaluation results of Ni-doped alumina combined with TiO 2 in photocatalytic glycerol reforming reaction have been included.

  19. State of the art: alumina ceramics for energy applications

    Energy Technology Data Exchange (ETDEWEB)

    Hauth, W.E.; Stoddard, S.D.

    1978-01-01

    Prominent ceramic raw materials and products manufacturers were surveyed to determine the state of the art for alumina ceramic fabrication. This survey emphasized current capabilities and limitations for fabrication of large, high-density, high-purity, complex shapes. Some directions are suggested for future needs and development.

  20. Thin alumina and silica films by chemical vapor deposition (CVD)

    NARCIS (Netherlands)

    Hofman, R.; Morssinkhof, R.W.J.; Fransen, T.; Westheim, J.G.F.; Gellings, P.J.

    1993-01-01

    Alumina and silica coatings have been deposited by MOCVD (Metal Organic Chemical Vapor Deposition) on alloys to protect them against high temperature corrosion. Aluminium Tri-lsopropoxide (ATI) and DiAcetoxyDitertiaryButoxySilane (DAOBS) have been used as metal organic precursors to prepare these ce

  1. Multifunctional substrates of thin porous alumina for cell biosensors

    KAUST Repository

    Toccafondi, Chiara

    2014-02-27

    We have fabricated anodic porous alumina from thin films (100/500 nm) of aluminium deposited on technological substrates of silicon/glass, and investigated the feasibility of this material as a surface for the development of analytical biosensors aiming to assess the status of living cells. To this goal, porous alumina surfaces with fixed pitch and variable pore size were analyzed for various functionalities. Gold coated (about 25 nm) alumina revealed surface enhanced Raman scattering increasing with the decrease in wall thickness, with factor up to values of approximately 104 with respect to the flat gold surface. Bare porous alumina was employed for micro-patterning and observation via fluorescence images of dye molecules, which demonstrated the surface capability for a drug-loading device. NIH-3T3 fibroblast cells were cultured in vitro and examined after 2 days since seeding, and no significant (P > 0.05) differences in their proliferation were observed on porous and non-porous materials. The effect on cell cultures of pore size in the range of 50–130 nm—with pore pitch of about 250 nm—showed no significant differences in cell viability and similar levels in all cases as on a control substrate. Future work will address combination of all above capabilities into a single device.

  2. N-doped mesoporous alumina for adsorption of carbon dioxide

    Institute of Scientific and Technical Information of China (English)

    Jayshri A.Thote; Ravikrishna V.Chatti; Kartik S.Iyer; Vivek Kumar; Arti N.Valechha; Nitin K.Labhsetwar; Rajesh B.Biniwale; M.K.N.Yenkie; Sadhana S.Rayalu

    2012-01-01

    N-doped mesoporous alumina has been synthesized using chitosan as the biopolymer template.The adsorbent has been thoroughly investigated for the adsorption of CO2 from a simulated flue gas stream (15% CO2 balanced with N2) and compared with commercially available mesoporous alumina procured from SASOL,Germany.CO2 adsorption was studied under different conditions of pretreatment and adsorption temperature,inlet CO2 concentration and in the presence of oxygen and moisture.The adsorption capacity was determined to be 29.4 mg CO2/g of adsorbent at 55℃.This value was observed to be 4 times higher in comparison to that of commercial mesoporous alumina at a temperature of 55℃.Basicity of alumina surface coupled with the presence of nitrogen in template in synthesized sample is responsible for this enhanced CO2 adsorption.Adsorption capacity for CO2 was retained in the presence of oxygen; however moisture had a deteriorating effect on the adsorption capacity reducing it to nearly half the value.

  3. Synthesis and structural evaluation of freeze-cast porous alumina

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Douglas F., E-mail: souzadf@outlook.com [Department of Metallurgical and Materials Engineering, Federal University of Minas Gerais — UFMG, Avenida Presidente Antônio Carlos, 6627, Campus UFMG, Belo Horizonte, MG CEP: 31270-901, Escola de Engenharia, bloco 2, sala 2230 (Brazil); Nunes, Eduardo H.M., E-mail: eduardohmn@gmail.com [Department of Metallurgical and Materials Engineering, Federal University of Minas Gerais — UFMG, Avenida Presidente Antônio Carlos, 6627, Campus UFMG, Belo Horizonte, MG CEP: 31270-901, Escola de Engenharia, bloco 2, sala 2230 (Brazil); Pimenta, Daiana S.; Vasconcelos, Daniela C.L. [Department of Metallurgical and Materials Engineering, Federal University of Minas Gerais — UFMG, Avenida Presidente Antônio Carlos, 6627, Campus UFMG, Belo Horizonte, MG CEP: 31270-901, Escola de Engenharia, bloco 2, sala 2230 (Brazil); Nascimento, Jailton F.; Grava, Wilson [Petrobras/CENPES, Avenida Horácio Macedo 950, Cidade Universitária, Ilha do Fundão, Rio de Janeiro, RJ CEP:21941-915 (Brazil); Houmard, Manuel [Department of Materials Engineering and Civil Construction, Federal University of Minas Gerais — UFMG, Avenida Presidente Antônio Carlos, 6627, Campus UFMG, Belo Horizonte, MG CEP: 31270-901, Escola de Engenharia, bloco 1, sala 3304 (Brazil); Vasconcelos, Wander L., E-mail: wlv@demet.ufmg.br [Department of Metallurgical and Materials Engineering, Federal University of Minas Gerais — UFMG, Avenida Presidente Antônio Carlos, 6627, Campus UFMG, Belo Horizonte, MG CEP: 31270-901, Escola de Engenharia, bloco 2, sala 2230 (Brazil)

    2014-10-15

    In this work we fabricated alumina samples by the freeze-casting technique using tert-butanol as the solvent. The prepared materials were examined by scanning electron microscopy and X-ray microtomography. Next, they were coated with sol–gel silica films by dip-coating. Permeability tests were carried out in order to assess the permeation behavior of the materials processed in this study. We observed that the sintering time and alumina loading showed a remarkable effect on both the structural properties and flexural strength of the freeze-cast samples. Nitrogen adsorption tests revealed that the silica prepared in this study exhibited a microporous structure. It was observed that the presence of silica coatings on the alumina surface decreased the CO{sub 2} permeance by about one order of magnitude. Because of the similar kinetic diameters of nitrogen and carbon dioxide, the CO{sub 2}/N{sub 2} system showed a separation efficiency that was lower than that observed for the He/CO{sub 2} and He/N{sub 2} systems. We noticed that increasing the feed pressure improved the separation capacity of the obtained materials. - Highlights: • Porous alumina samples obtained by the freeze-casting technique • Microporous silica coating prepared by a simple sol–gel dip-coating methodology • Samples examined by SEM, μ-CT, and nitrogen sorption tests • Mechanical tests were carried out in the freeze-cast samples. • The presence of silica coatings on the alumina surface decreased the CO{sub 2} permeance.

  4. Advanced morphological analysis of patterns of thin anodic porous alumina

    Energy Technology Data Exchange (ETDEWEB)

    Toccafondi, C. [Istituto Italiano di Tecnologia, Department of Nanophysics, Via Morego 30, Genova I 16163 (Italy); Istituto Italiano di Tecnologia, Department of Nanostructures, Via Morego 30, Genova I 16163 (Italy); Stępniowski, W.J. [Department of Advanced Materials and Technologies, Faculty of Advanced Technologies and Chemistry, Military University of Technology, 2 Kaliskiego Str., 00-908 Warszawa (Poland); Leoncini, M. [Istituto Italiano di Tecnologia, Department of Nanostructures, Via Morego 30, Genova I 16163 (Italy); Salerno, M., E-mail: marco.salerno@iit.it [Istituto Italiano di Tecnologia, Department of Nanophysics, Via Morego 30, Genova I 16163 (Italy)

    2014-08-15

    Different conditions of fabrication of thin anodic porous alumina on glass substrates have been explored, obtaining two sets of samples with varying pore density and porosity, respectively. The patterns of pores have been imaged by high resolution scanning electron microscopy and analyzed by innovative methods. The regularity ratio has been extracted from radial profiles of the fast Fourier transforms of the images. Additionally, the Minkowski measures have been calculated. It was first observed that the regularity ratio averaged across all directions is properly corrected by the coefficient previously determined in the literature. Furthermore, the angularly averaged regularity ratio for the thin porous alumina made during short single-step anodizations is lower than that of hexagonal patterns of pores as for thick porous alumina from aluminum electropolishing and two-step anodization. Therefore, the regularity ratio represents a reliable measure of pattern order. At the same time, the lower angular spread of the regularity ratio shows that disordered porous alumina is more isotropic. Within each set, when changing either pore density or porosity, both regularity and isotropy remain rather constant, showing consistent fabrication quality of the experimental patterns. Minor deviations are tentatively discussed with the aid of the Minkowski measures, and the slight decrease in both regularity and isotropy for the final data-points of the porosity set is ascribed to excess pore opening and consequent pore merging. - Highlights: • Thin porous alumina is partly self-ordered and pattern analysis is required. • Regularity ratio is often misused: we fix the averaging and consider its spread. • We also apply the mathematical tool of Minkowski measures, new in this field. • Regularity ratio shows pattern isotropy and Minkowski helps in assessment. • General agreement with perfect artificial patterns confirms the good manufacturing.

  5. Nonradiative and Radiative Recombination in CdS Polycrystalline Structures

    Directory of Open Access Journals (Sweden)

    E. Gaubas

    2013-01-01

    Full Text Available Properties of polycrystalline CdS layers, employed in formation of the CdS-Cu2S heterostructures, have been studied by combining contactless techniques of the time and spectrally resolved photoluminescence (TR-PL spectroscopy and microwave-probed photoconductivity (MW-PC transients. The confocal microscopy has been employed to correlate the homogeneity of photoluminescence and grain size in CdS layers. Three types of samples with crystallite grain size of <1 μm (the I-type and of 2–10 μm of homogeneous (II-type and inhomogeneous (III-type grain distribution have been separated. The simultaneous record of MW-PC and TR-PL responses ensures the same sampling area on the layer under investigation, as both (MW-PC and TR-PL signals are generated by the same UV laser excitation beam. Two PL bands peaked at 500 and 700 nm were revealed. It has been demonstrated that photoluminescence intensity strongly depends on the properties of the polycrystalline 15–26 μm thick CdS layers with equilibrium carrier density of about 1.5×1013 cm−3, which serve as the substrates to form CdS-Cu2S junctions. The different carrier decay components were ascribed to different microareas with characteristic MW-PC and PL decay lifetimes of 2–10 ns, ascribed to microcrystallites with PL instantaneous decay lifetimes of 40–200 ns, and MW-PC decay lifetimes in the range of 100–1000 μs attributed to the inter-crystallite areas of CdS polycrystalline material.

  6. EFFECTIVE ELASTIC PROPERTIES OF ALUMINA-ZIRCONIA COMPOSITE CERAMICS - PART 4. TENSILE MODULUS OF POROUS ALUMINA AND ZIRCONIA

    Directory of Open Access Journals (Sweden)

    W. Pabst

    2004-12-01

    Full Text Available In this fourth paper of a series on the effective elastic properties of alumina-zirconia composite ceramics the influence of porosity on the effective tensile modulus of alumina and zirconia ceramics is discussed. The examples investigated are alumina and zirconia ceramics prepared from submicron powders by starch consolidation casting using two different types of starch, potato starch (median size D50 =47.2 µm and corn starch (median size D50 =13.7 µm. The dependence of effective tensile moduli E, on the porosity f, measured for porosities in the ranges of approx. 19-55 vol.% and 10-42 vol.% for alumina and zirconia, respectively, using a resonant frequency technique, was evaluated by fitting with various model relations, including newly developed ones. A detailed comparison of the fitting results suggests the superiority of the new relation E/E0 = (1 - f·(1 - f/fC, developed by the authors (with the tensile modulus of the dense ceramic material E0 and the critical porosity fC, over most other existing fit models. Only for special purposes and well-behaved data sets the recently proposed exponential relation E/E0 = exp [-Bf/(1 - f] and the well-known Phani-Niyogi relation E/E0 = (1 - f/fCN might be preferable.

  7. Porous alumina, zirconia and alumina/zirconia for bone repair: fabrication, mechanical and in vitro biological response.

    Science.gov (United States)

    Hadjicharalambous, Chrystalleni; Buyakov, Ales; Buyakova, Svetlana; Kulkov, Sergey; Chatzinikolaidou, Maria

    2015-04-23

    Zirconia (ZrO2) and alumina (Al2O3) based ceramics are widely used for load-bearing applications in bone repair due to their excellent mechanical properties and biocompatibility. They are often regarded as bioinert since no direct bone-material interface is created unless a porous structure intercedes, leading to better bone bonding. In this regard, investigating interactions between cells and porous ceramics is of great interest. In the present study, we report on the successful fabrication of sintered alumina A-61, zirconia Z-50 and zirconia/alumina composite ZA-60 ceramics with medium porosities of 61, 50 and 60%, respectively, indicating a bimodal pore size distribution and good interconnectivity. They exhibit elastic moduli of 3-10 GPa and compressive strength values of 60-240 MPa, similar to those of human cortical bone.We performed in vitro cell-material investigations comparing the adhesion, proliferation and differentiation of mouse pre-osteoblasts MC3T3-E1 on the three porous materials. While all three ceramics demonstrate a strong cell attachment, better cell spreading is observed on zirconia-containing substrates. Significantly higher cell growth was quantified on the latter ceramics, revealing an increased alkaline phosphatase activity, higher collagen production and increased calcium biomineralization compared to A-61. Hence, these porous zirconia-containing ceramics elicit superior biological responses over porous alumina of similar porosity, promoting enhanced biological interaction, with potential use as non-degradable bone grafts or as implant coatings.

  8. Feasibility and process scale-up low cost alumina fibers for advanced Re-usable Surface Insulation (RSI)

    Science.gov (United States)

    Pearson, A.

    1975-01-01

    The objective of this program was to establish feasibility of a process to produce low cost aluminum oxide fibers having sufficient strength, flexibility, and thermal stability for multiple re-use at temperatures to 1480 C in advanced RSI type heat shields for reentry vehicles. Using bench-scale processing apparatus, the Alcoa 'Saphiber' process was successfully modified to produce nominally 8 microns diameter polycrystalline alpha-alumina fiber. Thermal stability was demonstrated in vacuum reheating tests to 1371 C and in atmospheric reheating to 1483 C. Individual fiber properties of strength, modulus, and flexibility were not determined because of friability and short length of the fiber. Rigidized tile produced from fiber of nominally 8, 20 and 40 micron diameter had thermal conductivities significantly higher than those of RSI SiO2 or mullite at relatively low temperature but became comparable above about 1000 C. Tile densities were high due to short fiber length, especially in the coarser diameter fiber. No significant effect of fiber diameter on thermal properties could be determined form the data. Mechanical properties of tiles deteriorated as fiber diameter increased.

  9. Polycrystalline gamma plutonium's elastic moduli versus temperature

    Energy Technology Data Exchange (ETDEWEB)

    Migliori, Albert [Los Alamos National Laboratory; Betts, J [Los Alamos National Laboratory; Trugman, A [Los Alamos National Laboratory; Mielke, C H [Los Alamos National Laboratory; Mitchell, J N [Los Alamos National Laboratory; Ramos, M [Los Alamos National Laboratory; Stroe, I [WORCESTER POLYTECHNIC INSTITUTE

    2009-01-01

    Resonant ultrasound spectroscopy was used to measure the elastic properties of pure polycrystalline {sup 239}Pu in the {gamma} phase. Shear and longitudinal elastic moduli were measured simultaneously and the bulk modulus was computed from them. A smooth, linear, and large decrease of all elastic moduli with increasing temperature was observed. They calculated the Poisson ratio and found that it increases from 0.242 at 519 K to 0.252 at 571 K. These measurements on extremely well characterized pure Pu are in agreement with other reported results where overlap occurs.

  10. Valley Filtering and Electronic Optics Using Polycrystalline Graphene

    Science.gov (United States)

    Nguyen, V. Hung; Dechamps, S.; Dollfus, P.; Charlier, J.-C.

    2016-12-01

    In this Letter, both the manipulation of valley-polarized currents and the optical-like behaviors of Dirac fermions are theoretically explored in polycrystalline graphene. When strain is applied, the misorientation between two graphene domains separated by a grain boundary can result in a mismatch of their electronic structures. Such a discrepancy manifests itself in a strong breaking of the inversion symmetry, leading to perfect valley polarization in a wide range of transmission directions. In addition, these graphene domains act as different media for electron waves, offering the possibility to modulate and obtain negative refraction indexes.

  11. Laser annealing of thin film polycrystalline silicon solar cell

    Directory of Open Access Journals (Sweden)

    Chowdhury A.

    2013-11-01

    Full Text Available Performances of thin film polycrystalline silicon solar cell grown on glass substrate, using solid phase crystallization of amorphous silicon can be limited by low dopant activation and high density of defects. Here, we investigate line shaped laser induced thermal annealing to passivate some of these defects in the sub-melt regime. Effect of laser power and scan speed on the open circuit voltage of the polysilicon solar cells is reported. The processing temperature was measured by thermal imaging camera. Enhancement of the open circuit voltage as high as 210% is achieved using this method. The results are discussed.

  12. An acoustic emission study of plastic deformation in polycrystalline aluminium

    Science.gov (United States)

    Bill, R. C.; Frederick, J. R.; Felbeck, D. K.

    1979-01-01

    Acoustic emission experiments were performed on polycrystalline and single crystal 99.99% aluminum while undergoing tensile deformation. It was found that acoustic emission counts as a function of grain size showed a maximum value at a particular grain size. Furthermore, the slip area associated with this particular grain size corresponded to the threshold level of detectability of single dislocation slip events. The rate of decline in acoustic emission activity as grain size is increased beyond the peak value suggests that grain boundary associated dislocation sources are giving rise to the bulk of the detected acoustic emissions.

  13. Progress and issues in polycrystalline thin-film PV technologies

    Energy Technology Data Exchange (ETDEWEB)

    Zweibel, K.; Ullal, H.S.; Roedern, B. von [National Renewable Energy Lab., Golden, CO (United States)

    1996-05-01

    Substantial progress has occurred in polycrystalline thin-film photovoltaic technologies in the past 18 months. However, the transition to first-time manufacturing is still under way, and technical problems continue. This paper focuses on the promise and the problems of the copper indium diselenide and cadmium telluride technologies, with an emphasis on continued R&D needs for the near-term transition to manufacturing and for next-generation improvements. In addition, it highlights the joint R&D efforts being performed in the U.S. Department of Energy/National Renewable Energy Laboratory Thin-Film Photovoltaic Partnership Program.

  14. PDC (polycrystalline diamond compact) bit research at Sandia National Laboratories

    Energy Technology Data Exchange (ETDEWEB)

    Finger, J.T.; Glowka, D.A.

    1989-06-01

    From the beginning of the geothermal development program, Sandia has performed and supported research into polycrystalline diamond compact (PDC) bits. These bits are attractive because they are intrinsically efficient in their cutting action (shearing, rather than crushing) and they have no moving parts (eliminating the problems of high-temperature lubricants, bearings, and seals.) This report is a summary description of the analytical and experimental work done by Sandia and our contractors. It describes analysis and laboratory tests of individual cutters and complete bits, as well as full-scale field tests of prototype and commercial bits. The report includes a bibliography of documents giving more detailed information on these topics. 26 refs.

  15. IR and UV irradiations on ion bombarded polycrystalline silver

    Energy Technology Data Exchange (ETDEWEB)

    Latif, Anwar, E-mail: anwarlatif@uet.edu.p [Department of Physics, University of Engineering and Technology, Lahore 54890 (Pakistan); Khaleeq-ur-Rahman, M.; Bhatti, K.A.; Rafique, M.S.; Rizvi, Z.H. [Department of Physics, University of Engineering and Technology, Lahore 54890 (Pakistan)

    2010-10-15

    Ion bombarded polycrystalline fine polished silver surfaces are exposed to Nd:YAG (1064 nm, 10 mJ, 12 ns) and KrF excimer (248 nm, 57 mJ, 20 ns) lasers to examine structural and morphological changes employing X-ray diffractometry and optical microscopy, respectively. Irradiation causes considerable changes in grain sizes. Hydrodynamic sputtering is found to be dominant in heat affected zones (HAZs). Craters with irregular boundary and non-uniform thermal conduction are resulted on laser ablated surfaces of ion bombarded specimens. No disturbance takes place in the d-spacing of the planes of irradiated samples.

  16. Remobilization in the cratonic lithosphere recorded in polycrystalline diamond

    Science.gov (United States)

    Jacob; Viljoen; Grassineau; Jagoutz

    2000-08-18

    Polycrystalline diamonds (framesites) from the Venetia kimberlite in South Africa contain silicate minerals whose isotopic and trace element characteristics document remobilization of older carbon and silicate components to form the framesites shortly before kimberlite eruption. Chemical variations within the garnets correlate with carbon isotopes in the diamonds, indicating contemporaneous formation. Trace element, radiogenic, and stable isotope variations can be explained by the interaction of eclogites with a carbonatitic melt, derived by remobilization of material that had been stored for a considerable time in the lithosphere. These results indicate more recent formation of diamonds from older materials within the cratonic lithosphere.

  17. Low temperature production of large-grain polycrystalline semiconductors

    Energy Technology Data Exchange (ETDEWEB)

    Naseem, Hameed A. (Fayetteville, AR); Albarghouti, Marwan (Loudonville, NY)

    2007-04-10

    An oxide or nitride layer is provided on an amorphous semiconductor layer prior to performing metal-induced crystallization of the semiconductor layer. The oxide or nitride layer facilitates conversion of the amorphous material into large grain polycrystalline material. Hence, a native silicon dioxide layer provided on hydrogenated amorphous silicon (a-Si:H), followed by deposited Al permits induced crystallization at temperatures far below the solid phase crystallization temperature of a-Si. Solar cells and thin film transistors can be prepared using this method.

  18. Activation Energy of Polycrystalline Silicon Thin Film Transistor

    Directory of Open Access Journals (Sweden)

    B.P. Tyagi

    2011-01-01

    Full Text Available The activation energy of a poly-Si thin film transistor is observed to be influenced by the grain size, trap state density and the inversion layer thickness. The present study aims to investigate these parameters theoretically so as to explore optimum conditions for the working of a polycrystalline silicon thin film transistor. Our computations have revealed that the activation energy decreases with the increase of gate bias for all values of grain size, trap states density and the inversion layer thickness. These findings are compared with the experimental results.

  19. Rotary Ultrasonic Machining of Poly-Crystalline Cubic Boron Nitride

    Directory of Open Access Journals (Sweden)

    Kuruc Marcel

    2014-12-01

    Full Text Available Poly-crystalline cubic boron nitride (PCBN is one of the hardest material. Generally, so hard materials could not be machined by conventional machining methods. Therefore, for this purpose, advanced machining methods have been designed. Rotary ultrasonic machining (RUM is included among them. RUM is based on abrasive removing mechanism of ultrasonic vibrating diamond particles, which are bonded on active part of rotating tool. It is suitable especially for machining hard and brittle materials (such as glass and ceramics. This contribution investigates this advanced machining method during machining of PCBN.

  20. Emission of nuclear quadrupole resonance from polycrystalline hexamethylenetetramine.

    Science.gov (United States)

    Ota, G; Itozaki, H

    2008-03-01

    The angular dependence of the nuclear quadrupole resonance (NQR) signal intensity emitted from polycrystalline hexamethylenetetramine has been analytically investigated for all directions for non-contact detection of chemicals by nuclear quadrupole resonance. The field pattern of the NQR signal from a column sample was measured. The emitted patterns were the same as that from a united single magnetic dipole, which fitted well to the estimation based on quadrupole principle axis system. This result is helpful to design an antenna for NQR remote detection.

  1. Complex strain paths in polycrystalline copper: microstructural aspects

    Directory of Open Access Journals (Sweden)

    M.F. Vieira

    1999-07-01

    Full Text Available Microstructural aspects of polycrystalline copper sheets subjected to complex strain paths were analysed in this work. Dislocation structures developed during the strain paths (rolling and tension and the evolution of this microstructure during reloading have been studied. The active slip systems developed in each strain path were used to explain the microstructural evolution. The heterogeneous surface deformation observed on polished tensile specimens prestrained in rolling was also analysed. The structural aspects are related with the mechanical behaviour of the material, namely with the increase in yield stress in reloading, the work hardening evolution and the premature occurrence of plastic instability for some prestrain values.

  2. Kinetical study about the cobalt electrodeposition onto polycrystalline platinum

    Directory of Open Access Journals (Sweden)

    Clara Hilda Rios-Reyes

    2013-01-01

    Full Text Available An electrochemical study of Co electrodeposition onto polycrystalline Pt from an aqueous solution containing 10-2 M CoCl2 + 1 M NH4CI (pH = 9.3 was conducted at overpotential conditions. The current density transients showed two maxima that corresponded to two nucleation and growth processes. The entire transient behavior was adequately predicted considering the contribution to the total current of four different processes: a Langmuir-type adsorption process, a diffusion-controlled two-dimensional instantaneous nucleation, and two three-dimensional nucleation and growth processes.

  3. Thermal conductivity of MoS2 polycrystalline nanomembranes

    Science.gov (United States)

    Sledzinska, M.; Graczykowski, B.; Placidi, M.; Saleta Reig, D.; El Sachat, A.; Reparaz, J. S.; Alzina, F.; Mortazavi, B.; Quey, R.; Colombo, L.; Roche, S.; Sotomayor Torres, C. M.

    2016-09-01

    Heat conduction in 2D materials can be effectively engineered by means of controlling nanoscale grain structure. A favorable thermal performance makes these structures excellent candidates for integrated heat management units. Here we show combined experimental and theoretical studies for MoS2 nanosheets in a nanoscale grain-size limit. We report thermal conductivity measurements on 5 nm thick polycrystalline MoS2 by means of 2-laser Raman thermometry. The free-standing, drum-like MoS2 nanomembranes were fabricated using a novel polymer- and residue-free, wet transfer, in which we took advantage of the difference in the surface energies between MoS2 and the growth substrate to transfer the CVD-grown nanosheets. The measurements revealed a strong reduction in the in-plane thermal conductivity down to about 0.73 ± 0.25 {{{W}}{{m}}}-1 {{{K}}}-1. The results are discussed theoretically using finite elements method simulations for a polycrystalline film, and a scaling trend of the thermally conductivity with grain size is proposed.

  4. Lattice Boltzmann models for the grain growth in polycrystalline systems

    Directory of Open Access Journals (Sweden)

    Yonggang Zheng

    2016-08-01

    Full Text Available In the present work, lattice Boltzmann models are proposed for the computer simulation of normal grain growth in two-dimensional systems with/without immobile dispersed second-phase particles and involving the temperature gradient effect. These models are demonstrated theoretically to be equivalent to the phase field models based on the multiscale expansion. Simulation results of several representative examples show that the proposed models can effectively and accurately simulate the grain growth in various single- and two-phase systems. It is found that the grain growth in single-phase polycrystalline materials follows the power-law kinetics and the immobile second-phase particles can inhibit the grain growth in two-phase systems. It is further demonstrated that the grain growth can be tuned by the second-phase particles and the introduction of temperature gradient is also an effective way for the fabrication of polycrystalline materials with grained gradient microstructures. The proposed models are useful for the numerical design of the microstructure of materials and provide effective tools to guide the experiments. Moreover, these models can be easily extended to simulate two- and three-dimensional grain growth with considering the mobile second-phase particles, transient heat transfer, melt convection, etc.

  5. GaAs Photovoltaics on Polycrystalline Ge Substrates

    Science.gov (United States)

    Wilt, David M.; Pal, AnnaMaria T.; McNatt, Jeremiah S.; Wolford, David S.; Landis, Geoffrey A.; Smith, Mark A.; Scheiman, David; Jenkins, Phillip P.; McElroy Bruce

    2007-01-01

    High efficiency III-V multijunction solar cells deposited on metal foil or even polymer substrates can provide tremendous advantages in mass and stowage, particularly for planetary missions. As a first step towards that goal, poly-crystalline p/i/n GaAs solar cells are under development on polycrystalline Ge substrates. Organo Metallic Vapor Phase Epitaxy (OMVPE) parameters for pre-growth bake, nucleation and deposition have been examined. Single junction p/i/n GaAs photovoltaic devices, incorporating InGaP front and back window layers, have been grown and processed. Device performance has shown a dependence upon the thickness of a GaAs buffer layer deposited between the Ge substrate and the active device structure. A thick (2 m) GaAs buffer provides for both increased average device performance as well as reduced sensitivity to variations in grain size and orientation. Illumination under IR light (lambda > 1 micron), the cells showed a Voc, demonstrating the presence of an unintended photoactive junction at the GaAs/Ge interface. The presence of this junction limited the efficiency to approx.13% (estimated with an anti-refection coating) due to the current mismatch and lack of tunnel junction interconnect.

  6. Influence of copper foil polycrystalline structure on graphene anisotropic etching

    Science.gov (United States)

    Sharma, Kamal P.; Mahyavanshi, Rakesh D.; Kalita, Golap; Tanemura, Masaki

    2017-01-01

    Anisotropic etching of graphene and other two dimensional materials is an important tool to understand the growth process as well as enabling fabrication of various well-defined structures. Here, we reveal the influence of copper foil polycrystalline structure on anisotropic etching process of as-synthesized graphene. Graphene crystals were synthesized on the polycrystalline Cu foil by a low-pressure chemical vapor deposition (LPCVD) system. Microscopic analysis shows difference in shape, size and stripes alignment of graphene crystals with dissimilar nucleation within closure vicinity of neighboring Cu grains. Post-growth etching of such graphene crystals also significantly affected by the crystallographic nature of Cu grains as observed by the field emission scanning electron microscope (FE-SEM) and electron back scattered diffraction (EBSD) analysis. Hexagonal hole formation with anisotropic etching is observed to be independent of the stripes and wrinkles in the synthesized graphene. We also observed variation in etched pattern of the graphene depending on the base Cu grain orientations, attributing to difference in nucleation and growth process. The findings can facilitate to understand the nature of microscopic etched pattern depending on metal catalyst crystallographic structure.

  7. Automated indexing of Laue images from polycrystalline materials

    Energy Technology Data Exchange (ETDEWEB)

    Chung, J.S.; Ice, G.E. [Oak Ridge National Lab., TN (United States). Metals and Ceramics Div.

    1998-12-31

    Third generation hard x-ray synchrotron sources and new x-ray optics have revolutionized x-ray microbeams. Now intense sub-micron x-ray beams are routinely available for x-ray diffraction measurement. An important application of sub-micron x-ray beams is analyzing polycrystalline material by measuring the diffraction of individual grains. For these measurements, conventional analysis methods will not work. The most suitable method for microdiffraction on polycrystalline samples is taking broad-bandpass or white-beam Laue images. With this method, the crystal orientation and non-isostatic strain can be measured rapidly without rotation of sample or detector. The essential step is indexing the reflections from more than one grain. An algorithm has recently been developed to index broad bandpass Laue images from multi-grain samples. For a single grain, a unique set of indices is found by comparing measured angles between Laue reflections and angles between possible indices derived from the x-ray energy bandpass and the scattering angle 2 theta. This method has been extended to multigrain diffraction by successively indexing points not recognized in preceding indexing iterations. This automated indexing method can be used in a wide range of applications.

  8. Creep and stress relaxation modeling of polycrystalline ceramic fibers

    Science.gov (United States)

    Dicarlo, James A.; Morscher, Gregory N.

    1994-01-01

    A variety of high performance polycrystalline ceramic fibers are currently being considered as reinforcement for high temperature ceramic matrix composites. However, under mechanical loading about 800 C, these fibers display creep related instabilities which can result in detrimental changes in composite dimensions, strength, and internal stress distributions. As a first step toward understanding these effects, this study examines the validity of a mechanism-based empirical model which describes primary stage tensile creep and stress relaxation of polycrystalline ceramic fibers as independent functions of time, temperature, and applied stress or strain. To verify these functional dependencies, a simple bend test is used to measure stress relaxation for four types of commercial ceramic fibers for which direct tensile creep data are available. These fibers include both nonoxide (SCS-6, Nicalon) and oxide (PRD-166, FP) compositions. The results of the Bend Stress Relaxation (BSR) test not only confirm the stress, time, and temperature dependencies predicted by the model, but also allow measurement of model empirical parameters for the four fiber types. In addition, comparison of model tensile creep predictions based on the BSR test results with the literature data show good agreement, supporting both the predictive capability of the model and the use of the BSR text as a simple method for parameter determination for other fibers.

  9. Penetration and lateral diffusion characteristics of polycrystalline graphene barriers

    Science.gov (United States)

    Yoon, Taeshik; Mun, Jeong Hun; Cho, Byung Jin; Kim, Taek-Soo

    2013-12-01

    We report penetration and lateral diffusion behavior of environmental molecules on synthesized polycrystalline graphene. Penetration occurs through graphene grain boundaries resulting in local oxidation. However, when the penetrated molecules diffuse laterally, the oxidation region will expand. Therefore, we measured the lateral diffusion rate along the graphene-copper interface for the first time by the environment-assisted crack growth test. It is clearly shown that the lateral diffusion is suppressed due to the high van der Waals interaction. Finally, we employed bilayer graphene for a perfect diffusion barrier facilitated by decreased defect density and increased lateral diffusion path.We report penetration and lateral diffusion behavior of environmental molecules on synthesized polycrystalline graphene. Penetration occurs through graphene grain boundaries resulting in local oxidation. However, when the penetrated molecules diffuse laterally, the oxidation region will expand. Therefore, we measured the lateral diffusion rate along the graphene-copper interface for the first time by the environment-assisted crack growth test. It is clearly shown that the lateral diffusion is suppressed due to the high van der Waals interaction. Finally, we employed bilayer graphene for a perfect diffusion barrier facilitated by decreased defect density and increased lateral diffusion path. Electronic supplementary information (ESI) available. See DOI: 10.1039/c3nr03849a

  10. Lattice Boltzmann models for the grain growth in polycrystalline systems

    Science.gov (United States)

    Zheng, Yonggang; Chen, Cen; Ye, Hongfei; Zhang, Hongwu

    2016-08-01

    In the present work, lattice Boltzmann models are proposed for the computer simulation of normal grain growth in two-dimensional systems with/without immobile dispersed second-phase particles and involving the temperature gradient effect. These models are demonstrated theoretically to be equivalent to the phase field models based on the multiscale expansion. Simulation results of several representative examples show that the proposed models can effectively and accurately simulate the grain growth in various single- and two-phase systems. It is found that the grain growth in single-phase polycrystalline materials follows the power-law kinetics and the immobile second-phase particles can inhibit the grain growth in two-phase systems. It is further demonstrated that the grain growth can be tuned by the second-phase particles and the introduction of temperature gradient is also an effective way for the fabrication of polycrystalline materials with grained gradient microstructures. The proposed models are useful for the numerical design of the microstructure of materials and provide effective tools to guide the experiments. Moreover, these models can be easily extended to simulate two- and three-dimensional grain growth with considering the mobile second-phase particles, transient heat transfer, melt convection, etc.

  11. Hydrogen interactions with polycrystalline and with deposited titanium surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Azoulay, A. [Ben-Gurion Univ. of the Negev, Beersheba (Israel); Shamir, N. [Nuclear Research Center-Negev, PO Box 9001, Beer Sheva (Israel); Fromm, E. [Max-Planck Institute fuer Metallforschung, Stuttgart (Germany); Szokefalvi-Nagy, A. [Max-Planck Institute fuer Metallforschung, Stuttgart (Germany); Mintz, M.H. [Ben-Gurion Univ. of the Negev, Beersheba (Israel)]|[Nuclear Research Center-Negev, PO Box 9001, Beer Sheva (Israel)

    1997-02-15

    The room temperature kinetics of hydrogen chemisorption and adsorption on polycrystalline and on deposited (sputter-deposited and evaporation-deposited) titanium surfaces were studied. Measurements of hydrogen surface accumulation were performed in a combined surface analyses system incorporating direct recoils spectrometry and Auger electron spectroscopy (AES). There, three different types of surface cleaning procedure were applied: heat-flashing, sputtering and sputter-deposition of titanium on a polycrystalline titanium substrate. The surface chemisorption kinetics obtained for the deposited samples were compared with the total kinetics of the gas phase consumption, performed in a volumetric Wagener system. From this comparison it was possible to distinguish between topmost surface chemisorption and subsurface (or bulk) absorption kinetics. It was concluded that, for all types of surface studied, hydrogen chemisorbed according to a Langmuir-type random two-sites chemisorption model, with high (close to unity) zero-coverage sticking probabilities. The only difference between these surfaces was in their roughness factors, which increased going from the heat-flashed, through the sputtered, to the deposited surfaces. Following the initial stage of a chemisorbed surface layer formation, constant-rate absorption of hydrogen proceeded over a very wide range of exposures (greater than 10{sup 4} Langmuirs). The accommodation probability of hydrogen during this linear stage was about 10{sup -2}. It is possible that this absorption process is controlled by the chemisorption of the H{sub 2} on the surface hydride phase, formed by the earlier hydrogen chemisorption. (orig.)

  12. Substrate-induced coagulation (SIC) of nano-disperse alumina in non-aqueous media: The dispersibility and stability of alumina in N-methyl-2-pyrrolidinone.

    Science.gov (United States)

    Basch, Angelika; Strnad, Simona

    2011-01-20

    This work investigated colloidal properties such as the zeta-potential, the electrophoretic mobilities and the wetting behaviour of alumina dispersed in non-aqueous media. Non-aqueous dispersions of alumina were prepared in the solvent N-methyl-2-pyrrolidinone (NMP). The wetting behaviour of alumina in NMP was characterized by the powder contact angle method and the Wilhemy plate method. The behaviour of the dispersion should provide information for the development of a substrate-induced coagulation (SIC) coating process of nano-sized alumina in non-aqeous media. SIC is a dip-coating process that coats pretreated but chemically different surfaces with nano-sized particles. It was found that the anionic surfactant dioctyl sulfosuccinate (AOT) had no stabilizing effect on alumina dispersed in NMP.

  13. Study of preparation and surface morphology of self-ordered nanoporous alumina; Estudo da preparacao e da morfologia de superficie de alumina nanoporosa auto-organizada

    Energy Technology Data Exchange (ETDEWEB)

    Rodrigues, Elisa Marchezini; Martins, Maximiliano Delany, E-mail: elisamarch@gmail.com, E-mail: MG.mdm@cdtn.br [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG. (Brazil); Silva, Ronald Arreguy, E-mail: arregsilva@yahoo.com.br [Centro Universitario de Belo Horizonte (UniBH), Belo Horizonte, MG (Brazil)

    2013-07-01

    Nanoporous alumina is a typical material that exhibits self-ordered nanochannels spontaneously organized in hexagonal shape. Produced by anodizing of metallic aluminum, it has been used as a template for production of materials at the nanoscale. This work aimed to study the preparation of nanoporous alumina by anodic anodizing of metallic aluminum substrates. The nanoporous alumina was prepared following the methodology proposed by Masuda and Fukuda (1995), a two-step method consisting of anodizing the aluminum sample in the potentiostatic mode, removing the layer of aluminum oxide (alumina) formed and then repeat the anodization process under the same conditions as the first anodization. This method produces nanoporous alumina with narrow pore diameter distribution and well-ordered structure. (author)

  14. Delaunay-Network Modelling of Creep Failure in Regular Polycrystalline Aggregates by Grain Boundary Cavitation

    NARCIS (Netherlands)

    Burg, M.W.D. van der; Giessen, E. van der

    1994-01-01

    In polycrystalline materials at elevated temperatures subjected to stationary loading, creep fracture occurs as a result of failure mechanisms on the size scale of grains, namely the nucleation and diffusive growth of cavities until coalescence leads to microcracks. In this paper, a polycrystalline

  15. Polycrystalline SiC as source material for the growth of fluorescent SiC layers

    DEFF Research Database (Denmark)

    Kaiser, M.; Hupfer, T.; Jokubavicus, V.;

    2013-01-01

    Polycrystalline doped SiC act as source for fluorescent SiC. We have studied the growth of individual grains with different polytypes in the source material. We show an evolution and orientation of grains of different polytypes in polycrystalline SiC ingots grown by the Physical Vapor Transport...

  16. Electromechanical Response of Polycrystalline Barium Titanate Resolved at the Grain Scale

    DEFF Research Database (Denmark)

    Majkut, Marta; Daniels, John E.; Wright, Jonathan P.

    2017-01-01

    critical for understanding bulk polycrystalline ferroic behavior. Here, three-dimensional X-ray diffraction is used to reconstruct a 3D grain map (grain orientations and neighborhoods) of a polycrystalline barium titanate sample and track the grain-scale non-180° ferroelectric domain switching strains...

  17. Experimental Investigation of Polycrystalline Material Deformation Based on a Grain Scale

    Institute of Scientific and Technical Information of China (English)

    LI Xi-De; YANG Yan; WEI Cheng

    2005-01-01

    @@ We propose an experimental approach for investigation of the polycrystalline deformation behaviour at a grain scale. The technique is characterized by the joint application of micro material testing systems and the intragranular deformation analysis methods. It is attempting to map the deformation evolution at grain scale during the elastic and plastic deformations of polycrystalline specimens.

  18. High-Performance Deep SubMicron CMOS Technologies with Polycrystalline-SiGe Gates

    NARCIS (Netherlands)

    Ponomarev, Youri V.; Stolk, Peter A.; Salm, Cora; Schmitz, Jurriaan; Woerlee, P.H.

    2000-01-01

    The use of polycrystalline SiGe as the gate material for deep submicron CMOS has been investigated. A complete compatibility to standard CMOS processing is demonstrated when polycrystalline Si is substituted with SiGe (for Ge fractions below 0.5) to form the gate electrode of the transistors. Perfor

  19. High-Performance Deep SubMicron CMOS Technologies with Polycrystalline-SiGe Gates

    NARCIS (Netherlands)

    Ponomarev, Youri V.; Stolk, Peter A.; Salm, Cora; Schmitz, Jurriaan; Woerlee, P.H.

    2000-01-01

    The use of polycrystalline SiGe as the gate material for deep submicron CMOS has been investigated. A complete compatibility to standard CMOS processing is demonstrated when polycrystalline Si is substituted with SiGe (for Ge fractions below 0.5) to form the gate electrode of the transistors.

  20. Protective coating for alumina-silicon carbide whisker composites

    Science.gov (United States)

    Tiegs, Terry N.

    1989-01-01

    Ceramic composites formed of an alumina matrix reinforced with silicon carbide whiskers homogenously dispersed therein are provided with a protective coating for preventing fracture strength degradation of the composite by oxidation during exposure to high temperatures in oxygen-containing atmospheres. The coating prevents oxidation of the silicon carbide whiskers within the matrix by sealing off the exterior of the matrix so as to prevent oxygen transport into the interior of the matrix. The coating is formed of mullite or mullite plus silicon oxide and alumina and is formed in place by heating the composite in air to a temperature greater than 1200.degree. C. This coating is less than about 100 microns thick and adequately protects the underlying composite from fracture strength degradation due to oxidation.

  1. Alumina lightweight ceramics modified with plasma synthesized nanopowders

    Science.gov (United States)

    Zake, I.; Svinka, R.; Svinka, V.; Palcevskis, E.

    2011-12-01

    The aim of this study is to clarify possibilities of using plasma synthesized Al2O3 and SiC nanopowders as additives in alumina lightweight ceramics prepared by slip casting. Each plasma synthesized nanopowder (PSNP) was incorporated in the material by a different method, because of their diverse influence on the properties of slip. Al2O3 PSNP was introduced in the matrix in form of aqueous suspension. SiC nanopowder was added directly to raw materials. Bending strength, bulk density, apparent porosity and thermal shock resistance were determined to evaluate the influence of these additives. The effect of Al2O3 PSNP addition on the properties of material depends on the initial sintering temperature. SiC particles during sintering oxidize into SiO2 and then in the reaction with alumina form mullite. Addition of SiC considerably improves bending strength and thermal shock resistance.

  2. Epitaxial growth of tungsten nanoparticles on alumina and spinel surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez-Suarez, T; Lopez-Esteban, S; Pecharroman, C; Esteban-Cubillo, A; Moya, J S [Instituto de Ciencia de Materiales de Madrid (ICMM), Consejo Superior de Investigaciones Cientificas (CSIC), C/ Sor Juana Ines de la Cruz 3, 28049, Cantoblanco, Madrid (Spain); Diaz, L A; Torrecillas, R [Nanomaterials and Nanotechnology Research Center (CINN), Consejo Superior de Investigaciones CientIficas (CSIC), C/ Francisco Pintado Fe 26, 33011, Oviedo, Asturias (Spain); Gremillard, L [Universite de Lyon, INSA-Lyon, MATEIS, UMR CNRS 5510, 20 avenue Albert Einstein, Villeurbanne F-69621 (France)], E-mail: jsmoya@icmm.csic.es

    2008-05-28

    Isolated tungsten nanoparticles ({alpha}-W and {beta}-W phase) were synthesized and epitaxially grown on alumina and spinel particle surfaces with an average tungsten size of {<=}20 nm for a low tungsten content (of {<=}1.5 vol%). Using tungsten (VI) ethoxide alcoholic solutions, tungsten trioxide hydrated precursors were attached to a ceramic grains surface as a nanoparticle coating. High-resolution transmission electron microscopy (HRTEM) micrographs showed epitaxial interfaces between alumina, spinel and metallic tungsten. This epitaxial growth is assumed to be due to the effect of water vapour on the sublimation of ortho-tungstic acid during the reduction process in a hydrogen atmosphere. The planes involved in the epitaxy were found to be (22-bar 0){sub Al2O3} parallel (121){sub W} and (311){sub MgAl2O4} parallel (110){sub W}.

  3. Measurements of prompt radiation induced conductivity of alumina and sapphire

    Energy Technology Data Exchange (ETDEWEB)

    Hartman, E. Frederick [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Zarick, Thomas Andrew [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Sheridan, Timothy J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Preston, Eric F. [ITT Coporation, Colorado Springs, CO (United States)

    2011-04-01

    We performed measurements of the prompt radiation induced conductivity in thin samples of Alumina and Sapphire at the Little Mountain Medusa LINAC facility in Ogden, UT. Five mil thick samples were irradiated with pulses of 20 MeV electrons, yielding dose rates of 1E7 to 1E9 rad/s. We applied variable potentials up to 1 kV across the samples and measured the prompt conduction current. Analysis rendered prompt conductivity coefficients between 1E10 and 1E9 mho/m/(rad/s), depending on the dose rate and the pulse width for Alumina and 1E7 to 6E7 mho/m/(rad/s) for Sapphire.

  4. Preparation of zirconia-alumina powder by co-precipitation

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    A zirconia-alumina powder with a near spherical shape and an average size of 0.1 ~ 0.2μm was prepared byco-precipitation. XRD analysis shows that α-Al2O3 phase may be directly transformed from amorphous in calcining the hydroxide composite. The ZrO2-Al2O3 composite ceramics manufactured from this powder has the maximum fracture toughness of 9 M Pa·m- 1/2 at 15 % ZrO2 and 740 MPa fracture strength at 5 % ZrO2. Zirconia grains about 1 μm in diameter aredispersed uniformly in the alumina ceramic matrix

  5. Melt processing of Bi--2212 superconductors using alumina

    Science.gov (United States)

    Holesinger, Terry G.

    1999-01-01

    Superconducting articles and a method of forming them, where the superconducting phase of an article is Bi.sub.2 Sr.sub.2 CaCu.sub.2 O.sub.y (Bi-2212). Alumina is combined with Bi-2212 powder or Bi-2212 precursor powder and, in order to form an intimate mixture, the mixture is melted and rapidly cooled to form a glassy solid. The glassy solid is comminuted and the resulting powder is combined with a carrier. An alternative to melting is to form the mixture of nanophase alumina and material having a particle size of less than about 10 microns. The powder, with the carrier, is melt processed to form a superconducting article.

  6. Optical characterization of gold coated over nanostructured alumina films

    Science.gov (United States)

    Aslan, Mustafa M.

    2014-02-01

    The gold coated over nanostructured alumina (GCON-A) films were investigated for layers' thicknesses and optical properties between 400 and 800 nm wavelength. First GCON-A films were fabricated in three steps: atomic layer deposition of alumina, hot water treatment, and gold deposition. Then, polarization maintained angular reflectance measurements were taken with a spectroscopic ellipsometry. Layer thicknesses, effective refractive indices, and absorption coefficients of films were determined through regression analysis on the ellipsometry data. To investigate the optical properties of the GCON-A films further, reflection measurements were taken by the visible spectroscopy. All these results verify that it is feasible to tune optical properties of the GCON-A films.

  7. Catalyst materials based on plasma-processed alumina nanopowder

    Directory of Open Access Journals (Sweden)

    Dubencovs Konstantins

    2012-01-01

    Full Text Available A platinum catalyst for glycerol oxidation by molecular oxygen has been developed applying the extractive-pyrolytic method and using, as a support, a fine alumina powder with an average particle size of 30-60 nm processed by plasma technology. The extractive-pyrolytic method (EPM allows affixing small amounts of catalytic metals (1-5% with the particle size ranging from several nanometers to several tens of nanometers onto the surface of the support. The prepared material - 4.8 wt. % platinum on nano-sized alumina - can be used as a catalyst for glycerol oxidation by oxygen with conversion up to 84%, in order to produce some organic acids (glyceric and lactic acid with a selectivity of about 60%.

  8. Synthesis of catalysts supported in {gamma}-alumina; Sintese de catalisadores suportados na {gamma}-alumina

    Energy Technology Data Exchange (ETDEWEB)

    Pereira, Luiza Gabriel; Silva, A.J.N.; Santos, I.M.G.; Souza, A.G. [Paraiba Univ, Joao Pessoa, PB (Brazil). Dept. de Quimica. Lab. de Termoquimica e Materiais]. E-mail: luizagaby@yahoo.com.br; Fernandes Junior, V.J.; Araujo, A.S. [Rio Grande do Norte Univ., Natal, RN (Brazil). Dept. de Quimica. Lab. de Combustiveis

    2003-07-01

    Fuels contain a great amount of undesirable pollutants as asphaltenes, metals, sulfides and nitrogen compounds. The content of sulfur in petroleum is around 1%,. When burned, fuels liberate SO{sub x}, the greatest air pollutant . The maximum sulfur quantity in diesel is {approx}350 wppm, but in agreement to European specifications, this content will fall to 50 wppm up to 2005. To remove this sulfur a deep hydrodesulfurization is necessary, requiring high performance catalysts. This way, in this work, the following catalysts were synthesized, using Pechini method: MoO{sub 3} containing Ni and/or Co supported on {gamma}-alumina, with the formulas Co{sub x}Mo{sub 1-x}O{sub 3}/Al{sub 2}O{sub 3}, Ni{sub x}Mo{sub 1-x}O{sub 3}/Al{sub 2}O{sub 3} and Ni{sub x/2}Co{sub x/2}Mo{sub 1-x}O{sub 3}/Al{sub 2}O{sub 3} where x 0,01, 0,02 and 0,03 in mol percentage. This method was proposed, due to its high stoichiometry control, purity, reproducibility and homogeneity. All catalysts were submitted to thermal treatment at 500 deg C to 700 deg C and characterized by thermogravimetry, infrared spectroscopy, X-ray diffraction. Results indicate the stabilization of the requested composition at around 622 deg C. The X-ray diffraction results indicate that secondary phase increases with dopant amount. (author)

  9. MICROWAVE JOINING OF ALUMINA CERAMIC AND HYDROXYLAPATITE BIOCERAMIC

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    Microwave joining is a rapid developmental new techniqu e in recent years.This paper introduces a new microwave joining equipment which was made by our lab,succeeds in alumina ceramic-hydroxylapatite bioceramic j o in in the equipment, and analyzes the join situation of join boundary by using s canni ng electron microscope(SEM),this paper analyzes the mechanism of microwave joini ng also.

  10. Single Crystal Structure Determination of Alumina to 1 Mbar

    Science.gov (United States)

    Dong, H.; Zhang, L.; Prakapenka, V.; Mao, H.

    2014-12-01

    Aluminum oxide (Al2O3) is an important ceramic material and a major oxide in the earth. Additionally, alumina is a widely used pressure standard in static high-pressure experiments (Cr3+-bearing corundum, ruby). The changes of its crystal structure with pressure (P) and temperature (T) are important for its applications and understanding its physical properties in the deep Earth. There have been numerous reports on the high P-T polymorphs of alumina. Previous theoretical calculations and experiments suggest that the crystal structure of Al2O3 evolves greatly at high P-T. In this study, we used the newly developed multigrain crystallography method combined with single-crystal x-ray diffraction analysis technique for the structure determination of alumina at high P-T to provide single-crystal structure refinement for high-pressure phases of Al2O3. Alumina powder was mixed with ~10% Pt and Ne was used as both pressure transmitting media and thermal insulating layers during laser-heating. Coarse-grained aggregates of Al2O3 were synthesized in a laser-heated diamond anvil cell. The structure change of Al2O3 was monitored by in situ x-ray diffraction at ~1 Mbar and 2700 K. The results allow us to distinguish the structural differences between the Rh2O3 (II) structure (space group Pbcn) and perovskite structure (space group Pbnm) for the first high-pressure phase of Al2O3. More detailed results will be discussed in the later work.

  11. Ion irradiation effect of alumina and its luminescence

    Energy Technology Data Exchange (ETDEWEB)

    Aoki, Yasushi; Yamamoto, Shunya; Naramoto, Hiroshi [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment; My, N.T.

    1997-03-01

    The luminescence spectra of single crystalline alpha-alumina and ruby which has 0.02% of Cr{sub 2}O{sub 3} as a impurity, induced by 200 keV He{sup +} and Ar{sup +} irradiation were measured at room temperature as a function of irradiation dose. The analysis of the measured spectra showed the existence of three main luminescence features in the wavelength region of 250 to 350 nm, namely anionic color centers, F-center at 411 nm and F{sup +}-center at 330 nm and a band observed around 315 nm. As alpha-alumina was irradiated with He{sup +}, F-center and F{sup +}-center luminescence grew and decayed, but the behaviors of those were different from each other. It seems that a concentration quenching occurred on the F-center luminescence in the dose range above 1x10{sup 14} He/cm{sup 2}. Furthermore, F-center luminescence was strongly suppressed in ruby, compared with that in alumina. On the other hand, the luminescence band around 315 nm appeared only in the early stage of irradiation and did not show its growth part. The dose dependent behavior was similar to that of Cr{sup 3+} emission at 695 nm (R-line) in ruby in both cases of He{sup +} and Ar{sup +} irradiation. Based on the experimental results mentioned above, the processes of defect formation and excitation in alumina in the early stage of ion irradiation will be discussed. (author)

  12. Friction and Wear of Sintered Alumina at High Temperature

    OpenAIRE

    Senda, Tetsuya; TAKAHASHl, Chiori; UEMATSU, Susumu; Amada, Shigeyasu

    1991-01-01

    The frictional behavior of alumina ceramics was investigated at various temperatures up to 1200℃. The coefficient of friction decreased with increasing temperature and this temperature dependency became more pronounced as higher contact pressures were applied. Wear loss at room temperature could be interpreted as being caused by one of either two different behavior modes. These have a rate difference of a factor of ten. At temperatures higher than 800℃, the wear loss was far less than that at...

  13. Thin alumina and silica films by chemical vapor deposition (CVD)

    OpenAIRE

    Hofman, R.; Morssinkhof, R.W.J.; Fransen, T.; Westheim, J.G.F.; Gellings, P.J.

    1993-01-01

    Alumina and silica coatings have been deposited by MOCVD (Metal Organic Chemical Vapor Deposition) on alloys to protect them against high temperature corrosion. Aluminium Tri-lsopropoxide (ATI) and DiAcetoxyDitertiaryButoxySilane (DAOBS) have been used as metal organic precursors to prepare these ceramic coatings. The influence of several process steps on the deposition rate and surface morphology is discussed. The deposition of SiO2 at atmospheric pressure is kinetically limited below 833 K ...

  14. Results of recent KROTOS FCI tests. Alumina vs. corium melts

    Energy Technology Data Exchange (ETDEWEB)

    Huhtiniemi, I.; Magallon, D.; Hohmann, H. [Commission of the European Communities, Ispra (Italy). Joint Research Center

    1998-01-01

    Recent results from KROTOS fuel-coolant interaction experiments are discussed. Five tests with alumina were performed under highly subcooled conditions, all of these tests resulted in spontaneous steam explosions. Additionally, four tests were performed at low subcooling to confirm, on one hand, the suppression of spontaneous steam explosions under such conditions and, on the other hand, that such a system is still triggerable using an external initiator. The other test parameters in these alumina tests included the melt superheat and the initial pressure. All the tests in the investigated superheat range (150 K - 750 K) produced a steam explosion and no evidence of the explosion suppression by the elevated initial pressure (in the limited range of 0.1 - 0.375 MPa) was observed in the alumina tests. The corium test series include a test with 3 kg of melt under both subcooled and near saturated conditions at ambient pressure. Two additional tests were performed with subcooled water; one test was performed at an elevated pressure of 0.2 MPa with 2.4 kg of melt and another test with 5.1 kg of melt at ambient pressure. None of these tests with corium produced a propagating energetic steam explosion. However, propagating low energy (about twice the energy of the trigger pulse) events were observed. All corium tests produced significantly higher water level swells during the mixing phase than the corresponding alumina tests. Present experimental evidence suggests that the water depletion in the mixing zone suppresses energetic steam explosions with corium melts at ambient pressure and in the present pour geometry. Processes that could produce such a difference in void generation are discussed. (author)

  15. Proton adsorption onto alumina: extension of multisite complexation (MUSIC) theory

    Energy Technology Data Exchange (ETDEWEB)

    Nagashima, K.; Blum, F.D.

    1999-09-01

    The adsorption isotherm of protons onto a commercial {gamma}-alumina sample was determined in aqueous nitric acid with sodium nitrate as a background electrolyte. Three discrete regions could be discerned in the log-log plots of the proton isotherm determined at the solution pH 5 to 2. The multisite complexation (MUSIC) model was modified to analyze the simultaneous adsorption of protons onto various kinds of surface species.

  16. A generalized inverse-pole-figure method to analyze domain switching in polycrystalline ferroelectrics

    Science.gov (United States)

    Ryo, Hyok-Su; Ryo, In-Gwang

    2016-08-01

    In this study, a generalized inverse-pole-figure (IPF) method has been suggested to analyze domain switching in polycrystalline ferroelectrics including composition of morphotropic phase boundary (MPB). Using the generalized IPF method, saturated domain orientation textures of single-phase polycrystalline ferroelectrics with tetragonal and rhombohedral symmetry have been analytically calculated and the results have been confirmed by comparison with the results from preceding studies. In addition, saturated domain orientation textures near MPBs of different multiple-phase polycrystalline ferroelectrics have been also analytically calculated. The results show that the generalized IPF method is an efficient method to analyze not only domain switching of single-phase polycrystalline ferroelectrics but also MPB of multiple-phase polycrystalline ferroelectrics.

  17. Mechanisms limiting the performance of large grain polycrystalline silicon solar cells

    Science.gov (United States)

    Culik, J. S.; Alexander, P.; Dumas, K. A.; Wohlgemuth, J. W.

    1984-01-01

    The open-circuit voltage and short-circuit current of large-grain (1 to 10 mm grain diameter) polycrystalline silicon solar cells is determined by the minority-carrier diffusion length within the bulk of the grains. This was demonstrated by irradiating polycrystalline and single-crystal (Czochralski) silicon solar cells with 1 MeV electrons to reduce their bulk lifetime. The variation of short-circuit current with minority-carrier diffusion length for the polycrystalline solar cells is identical to that of the single-crystal solar cells. The open-circuit voltage versus short-circuit current characteristic of the polycrystalline solar cells for reduced diffusion lengths is also identical to that of the single-crystal solar cells. The open-circuit voltage of the polycrystalline solar cells is a strong function of quasi-neutral (bulk) recombination, and is reduced only slightly, if at all, by grain-boundary recombination.

  18. Mullite/SiAlON/alumina composites by infiltration processing

    Energy Technology Data Exchange (ETDEWEB)

    Albano, M.P.; Scian, A.N. [Centro de Tecnologia de Recursos Minerales y Ceramica, Buenos Aires (Argentina)

    1997-01-01

    The formation of mullite/SiAlON/alumina composites was studied by infiltrating a SiAlON/alumina-base composite with two different solutions, followed by thermal treatment. The base composite was prepared from a mixture of tabular Al{sub 2}O{sub 3} grains, fume SiO{sub 2}, and aluminum powders. The mixture was pressed into test bars and nitrided in a nitrogen-gas (N{sub 2}) atmosphere at 1,480 C. The infiltrants were prehydrolyzed ethyl polysilicate solution and ethyl polysilicate-aluminum nitrate solution. The composites were infiltrated under vacuum, cured at 100 C, and precalcined in air at 700 C. This infiltration process was repeated several times to produce bars that had been subjected to multiple infiltrations, then the bars were calcined in a N{sub 2} atmosphere at 1,480 C to obtain mullite/SiAlON/alumina composites. The infiltration process increased the percentage of nitrogenous crystalline and mullite phases in the matrix; therefore, a decrease of the composite microporosity was observed. The infiltration increased the mechanical strength of the composites. Of the two composites, the one produced using prehydrolyzed ethyl polysilicate as the infiltrant had a higher mechanical strength, before and after being subjected to a severe thermal shock.

  19. Intensifying digestion of diaspore and separation of alumina and silica

    Institute of Scientific and Technical Information of China (English)

    李小斌; 彭志宏; 刘桂华; 周秋生

    2003-01-01

    It was found that there lies a linear relationship among the thermodynamic data of complicate inorganic compounds with similar components. A method for estimating the thermodynamic data of complicate compound and a thermodynamic database involving alumina production were developed. It was found that the alumina digestion rate of activated diasporic bauxite by means of heat field increased much due to the structure aberration, i.e, from perfect structure to unstable corundum. The results from thermodynamic calculation and experiments showed that it was feasible for desilication at atmospheric pressure, and the effects on equilibrium concentration of SiO2 included temperature, mole ratio of Na2O/Al2O3 (αk), caustic and Na+ concentration. The technology of desilication of green liquor at atmosphere and separation of alumina and silica in aluminate solution with high concentration were established. The reaction activity of compounds containing silica and the converting law among compounds were studied, and the prototype technology of desilication products by hydrotreatment was also developed.

  20. Zirconia-alumina-nanodiamond composites with gemological properties

    Science.gov (United States)

    Díaz, Luis A.; Montes-Morán, Miguel A.; Peretyagin, Pavel Y.; Vladimirov, Yuriy G.; Okunkova, Anna; Moya, José S.; Torrecillas, Ramón

    2014-02-01

    Nanodiamonds have excellent mechanical and optical properties with a wide range of potential applications as a filler material for nanocomposites. Here, we present a new family of zirconia-alumina-nanodiamond composites using two main processing routes: (1) a colloidal method, and (2) power mixing homogenization. Composites with detonation nanodiamonds quantities ranging within 0.3-5 vol.% followed by a pulsed electrical current sintering at a temperature range from 1,200 to 1,500 °C have been analyzed, and a significant enhancement in mechanical properties, i.e., indentation hardness (16.17 GPa), fracture toughness (15.5 MPa m1/2), and bending strength (1,600 MPa), could be observed. To support these excellent properties, TEM, color, reflectivity, and Raman spectroscopy measurements were also carried out. The microstructure of the composites is very homogeneous with average grain sizes between 200 and 500 nm depending on the processing temperature. Two morphologies are present: (a) intergranular dispersion of alumina grains and nanodiamonds distributed along the grain boundaries of the ZrO2 matrix, and (b) intragranular nano-dispersion of ZrO2 particles with sizes 20-80 nm located inside the alumina grains. In the present article, we show, for the first time in the scientific literature, a continuous palette of gray color gradation of new ceramic materials of metalized colors (white index L* 98-40) for gemological applications.

  1. Environmental Sustainability of the Alumina Industry in Western Europe

    Directory of Open Access Journals (Sweden)

    Valentina Dentoni

    2014-12-01

    Full Text Available The implementation of European policies on environmental protection is enforcing some substantial modifications in the processing methods and technologies traditionally adopted in the alumina industry and, in particular, in the management of the alumina residue produced. The article analyses the evolution of the alumina production and the residue disposal practices in Western Europe. Some critical aspects regarding the legal implementation of the EU Directive on the landfill of waste are highlighted and discussed. With reference to the requirements established for the landfill of non-hazardous waste, a key point is represented by the possibility of reducing the deposit protection measures if the collection and treatment of leachate is not necessary. The flexibility introduced by the Directive is not incorporated into the Italian law; this fact may represent a major issue in the prospect of disposal conversion from wet to dry methods for companies operating in Italy, as it may endanger the economic sustainability of the plants’ upgrade, as well as the opportunity to attract outside investments.

  2. High strength alumina produced by direct coagulation casting

    Energy Technology Data Exchange (ETDEWEB)

    Baader, F.H.; Will, J.; Tieche, D. [Swiss Federal Institute of Technology, Zuerich (Switzerland)

    1995-09-01

    Direct Coagulation Casting is a new colloidal forming technique. Double layer stabilized, concentrated alumina suspensions are solidified by shifting the suspensions pH from 4 towards the isoelectric point at 9 using the in situ enzyme-catalyzed decomposition of urea. This reaction minimizes the repulsive forces between the suspended particles. The remaining, attractive Van der Waals forces form a stiff particle network. Suspensions with low viscosities (0.3 Pa*s, 59 vol%) were prepared at pH 4. Deagglomeration of the suspensions by ball milling reduced the agglomerate size below 5 pm. The coagulation kinetics could be influenced either by the urease concentration or by the suspension temperature. Process variables were established, providing long idle times, which allowed additional filtration and degassing steps. Coagulation was followed by drying and sintering, whereby densities of more than 3.97 g/cm{sup 3}, a 4-point bending strength of 685 MPa (HIPed) and a high reliablility (m = 40) for high purity alumina were achieved. DCC has the potential to improve the reliability of alumina components of complex shape, as well as to avoid expensive molding.

  3. Alumina Based 500 C Electronic Packaging Systems and Future Development

    Science.gov (United States)

    Chen, Liang-Yu

    2012-01-01

    NASA space and aeronautical missions for probing the inner solar planets as well as for in situ monitoring and control of next-generation aeronautical engines require high-temperature environment operable sensors and electronics. A 96% aluminum oxide and Au thick-film metallization based packaging system including chip-level packages, printed circuit board, and edge-connector is in development for high temperature SiC electronics. An electronic packaging system based on this material system was successfully tested and demonstrated with SiC electronics at 500 C for over 10,000 hours in laboratory conditions previously. In addition to the tests in laboratory environments, this packaging system has more recently been tested with a SiC junction field effect transistor (JFET) on low earth orbit through the NASA Materials on the International Space Station Experiment 7 (MISSE7). A SiC JFET with a packaging system composed of a 96% alumina chip-level package and an alumina printed circuit board mounted on a data acquisition circuit board was launched as a part of the MISSE7 suite to International Space Station via a Shuttle mission and tested on the orbit for eighteen months. A summary of results of tests in both laboratory and space environments will be presented. The future development of alumina based high temperature packaging using co-fired material systems for improved performance at high temperature and more feasible mass production will also be discussed.

  4. Nanocarbon-Coated Porous Anodic Alumina for Bionic Devices

    Directory of Open Access Journals (Sweden)

    Morteza Aramesh

    2015-08-01

    Full Text Available A highly-stable and biocompatible nanoporous electrode is demonstrated herein. The electrode is based on a porous anodic alumina which is conformally coated with an ultra-thin layer of diamond-like carbon. The nanocarbon coating plays an essential role for the chemical stability and biocompatibility of the electrodes; thus, the coated electrodes are ideally suited for biomedical applications. The corrosion resistance of the proposed electrodes was tested under extreme chemical conditions, such as in boiling acidic/alkali environments. The nanostructured morphology and the surface chemistry of the electrodes were maintained after wet/dry chemical corrosion tests. The non-cytotoxicity of the electrodes was tested by standard toxicity tests using mouse fibroblasts and cortical neurons. Furthermore, the cell–electrode interaction of cortical neurons with nanocarbon coated nanoporous anodic alumina was studied in vitro. Cortical neurons were found to attach and spread to the nanocarbon coated electrodes without using additional biomolecules, whilst no cell attachment was observed on the surface of the bare anodic alumina. Neurite growth appeared to be sensitive to nanotopographical features of the electrodes. The proposed electrodes show a great promise for practical applications such as retinal prostheses and bionic implants in general.

  5. Superhydrophobicity of Bionic Alumina Surfaces Fabricated by Hard Anodizing

    Institute of Scientific and Technical Information of China (English)

    Jing Li; Feng Du; Xianli Liu; Zhonghao Jiang; Luquan Ren

    2011-01-01

    Bionic alumina samples were fabricated on convex dome type aluminum alloy substrate using hard anodizing technique.The convex domes on the bionic sample were fabricated by compression molding under a compressive stress of 92.5 MPa.The water contact angles of the as-anodized bionic samples were measured using a contact angle meter (JC2000A) with the 3 μL water drop at room temperature.The measurement of the wetting property showed that the water contact angle of the unmodified as-anodized bionic alumina samples increases from 90° to 137° with the anodizing time.The increase in water contract angle with anodizing time arises from the gradual formation of hierarchical structure or composite structure.The structure is composed of the micro-scaled alumina columns and pores.The height of columns and the depth of pores depend on the anodizing time.The water contact angle increases significantly from 96° to 152° when the samples were modified with self-assembled monolayer of octadecanethiol (ODT),showing a change in the wettability from hydrophobicity to super-hydrophobicity.This improvement in the wetting property is attributed to the decrease in the surface energy caused by the chemical modification.

  6. Removing Bacillus subtilis from fermentation broth using alumina nanoparticles.

    Science.gov (United States)

    Mu, Dashuai; Mu, Xin; Xu, Zhenxing; Du, Zongjun; Chen, Guanjun

    2015-12-01

    In this study, an efficient separation technology using Al2O3 nanoparticles (NPs) was developed for removing Bacillus subtilis from fermentation broth. The dosage of alumina nanoparticles used for separating B. subtilis increased during the culture process and remained stable in the stationary phase of the culture process. The pH of the culture-broth was also investigated for its effects on flocculation efficiency, and showed an acidic pH could enhance the flocculation efficiency. The attachment mechanisms of Al2O3 NPs to the B. subtilis surface were investigated, and the zeta potential analysis showed that Al2O3 NPs could attach to B. subtilis via electrostatic attachment. Finally, the metabolite content and the antibacterial effect of the fermentation supernatants were detected and did not significantly differ between alumina nanoparticle separation and centrifugation separation. Together, these results indicate a great potential for a highly efficient and economical method for removing B. subtilis from fermentation broth using alumina nanoparticles. Copyright © 2015 Elsevier Ltd. All rights reserved.

  7. Physical Properties of Copper Based MMC Strengthened with Alumina

    Directory of Open Access Journals (Sweden)

    Kaczmar J. W.

    2014-06-01

    Full Text Available The aim of this work is the development of Cu-Al2O3 composites of copper Cu-ETP matrix composite materials reinforced by 20 and 30 vol.% Al2O3 particles and study of some chosen physical properties. Squeeze casting technique of porous compacts with liquid copper was applied at the pressure of 110 MPa. Introduction of alumina particles into copper matrix affected on the significant increase of hardness and in the case of Cu-30 vol. % of alumina particles to 128 HBW. Electrical resistivity was strongly affected by the ceramic alumina particles and addition of 20 vol. % of particles caused diminishing of electrical conductivity to 20 S/m (34.5% IACS. Thermal conductivity tests were performed applying two methods and it was ascertained that this parameter strongly depends on the ceramic particles content, diminishing it to 100 Wm-1K-1 for the composite material containing 30 vol.% of ceramic particles comparing to 400 Wm-1K-1 for the unreinforced copper. Microstructural analysis was carried out using SEM microscopy and indicates that Al2O3 particles are homogeneously distributed in the copper matrix. EDS analysis shows remains of silicon on the surface of ceramic particles after binding agent used during preparation of ceramic preforms.

  8. Thermodynamics of selenium sorption on alumina and montmorillonite

    Directory of Open Access Journals (Sweden)

    Jean-Pierre Morel

    2015-12-01

    Full Text Available The effect of pH and temperature on the thermodynamics of selenium sorption on alumina and montmorillonite was investigated. The equilibrium constants were obtained from batch experiments carried out at 25 and 40°C, under acidic and near to neutral conditions. Microcalorimetry was used to measure directly the enthalpy change upon sorption. These data were analysed by taking into account the different reactions that occur during the sorption process (the acid–base equilibria in the bulk solution on the one hand and the complexation equilibria between surface sites of the solid and solution species on the other hand. This was done using a simple surface model which assumes that the thermodynamic properties of the aluminol surface sites of both alumina and montmorillonite are identical. Two of the considered reactions were found to predominate, one under acidic conditions and one at near neutral pH. The microcalorimetric data allowed to check that the temperature effect on selenium sorption on alumina and montmorillonite can be correctly predicted simply using the above assumption concerning the sorption sites and by applying van’t Hoff relation both to the homogeneous and heterogeneous reactions.

  9. Micromechanical modelling of partially molten and sand reinforced polycrystalline ice

    Science.gov (United States)

    Castelnau, O.; Duval, P.

    2009-12-01

    The viscoplastic behaviour of polycrystalline ice is strongly affected by the very strong anisotropy of ice crystals. Indeed, in the dislocations creep regime relevant for ice sheet flow, dislocation glide on the basal plane of ice single crystals leads to strain-rates ~6 order of magnitude larger than strain-rates that might be obtain if only non-basal glide is activated. At the polycrystal scale, this behaviour is responsible for a strong mechanical interaction between grains in the secondary (stationary) creep regime, and strain-rate is essentially partitioned between soft grains well-oriented for basal glide and hard grains exhibiting an unfavourable orientation for basal slip. As a consequence, the macroscopic flow stress at the polycrystal scale essentially depends on the resistance of the hardest slip systems or on the associated accommodation processes such as climb of basal dislocation on non-basal planes. Creep experiments performed on polycrystalline ices containing a small amount (less than 10% volume fraction) of liquid water show a dramatic increase of strain-rate, by more than one order of magnitude, compared to solid ice when deformed under similar thermo-mechanical conditions. Similarly, a strong hardening is observed when polycrystalline ice is reinforced by sand (which can be considered as a rigid phase here). This behaviour can be explained by micromechanical models, which aims at estimating the mechanical interactions between grains. For example, the presence of water releases stress concentrations at grain boundaries and therefore favours the inactivation of non-basal systems. To estimate such effect and to reach quantitative comparison with experimental data, we make use of the recent Second-Order homogenization mean-field approach of Ponte-Castaneda, based on self-consistent scheme. The advantage of this approach, which has been shown to provide excellent results when applied to many different non-linear composite materials, comes from the

  10. Wear and flexural strength comparisons of alumina/feldspar resin infiltrated dental composites.

    Science.gov (United States)

    Le Roux, A R; Lachman, N; Walker, M; Botha, T

    2008-11-01

    Incorporating a feldspar chemical bond between alumina filler particles is expected to increase the wear-resistant and flexural strength properties. An investigation was carried out to evaluate the influence of the feldspar chemical bonding between alumina filler particles on wear and flexural strength of experimental alumina/feldspar dental composites. It was hypothesized that wear resistance and flexural strength would be significantly increased with increased feldspar mass. Alumina was chemically sintered and bonded with 30% and 60% feldspar mass, silanized and infiltrated with UDMA resin to prepare the dental restorative composite material. Higher wear-resistant characteristics resulted with increased feldspar mass of up to 60% (p 0.05). Feldspar chemical bonding between the alumina particles may improve on the wear-resistance and flexural strength of alumina/feldspar composites.

  11. Behavior of alumina barrier layer in the supporting electrolytes for deposition of nanowired materials

    Energy Technology Data Exchange (ETDEWEB)

    Jagminas, Arunas, E-mail: jagmin@ktl.mii.l [Institute of Chemistry, A. Gostauto 9, 01108 Vilnius (Lithuania); Cesuniene, Asta [Institute of Chemistry, A. Gostauto 9, 01108 Vilnius (Lithuania); Vrublevsky, Igor [Department of Microelectronics, Belarusian State University of Informatics and Radioelectronics, 6 Brovka str, Minsk 220013 (Belarus); Jasulaitiene, Vitalija; Ragalevicius, Rimas [Institute of Chemistry, A. Gostauto 9, 01108 Vilnius (Lithuania)

    2010-03-30

    In this study, we report the results obtained investigating the behavior of sulfuric and chromic acid alumina templates in typical supporting electrolytes frequently used for alternating current (ac) deposition of various nm-scaled materials. Qualitative analysis of voltammetric profiles taken for as-grown, ac-treated and annealed alumina films in a conventional tetraborate re-anodizing solution revealed dramatical changes in the properties of alumina barrier layer during ac treatment in these supporting electrolytes even at low current density. These changes were related here with the transport of protons through the barrier layer during ac treatment, discharge at the metal/oxide interface and hydrogenation of alumina material by hydrogen atoms in an upward way. This conclusion comes from the behavior of Pt/Hg|alumina|Me{sup z+} electrode and the valence band X-ray photoelectron spectra taken from the inner part of alumina barrier layer material before and after the ac treatment.

  12. Formation process of a strong water-repellent alumina surface by the sol-gel method

    Energy Technology Data Exchange (ETDEWEB)

    Feng Libang, E-mail: lepond@hotmail.com [School of Mechatronic Engineering, Lanzhou Jiaotong University, 88 West Anning Road, Lanzhou 730070 (China); Li Hui; Song Yongfeng; Wang Yulong [School of Mechatronic Engineering, Lanzhou Jiaotong University, 88 West Anning Road, Lanzhou 730070 (China)

    2010-03-01

    A novel strong water-repellent alumina thin film is fabricated by chemically adsorbing stearic acid (STA) layer onto the porous and roughened aluminum film coated with polyethyleneimine (PEI). The formation process and the structure of the strong water-repellent alumina film are investigated by means of contact angle measurement and atomic force microscope (AFM). Results show that the water contact angles for the alumina films increase with the increase of the immersion time in the boiling water, and meanwhile, the roughness of the alumina films increases with the dissolution of the boehmite in the boiling water. Finally, the strong water-repellent film with a high water contact angle of 139.1 deg. is obtained when the alumina films have distinct roughened morphology with some papillary peaks and porous structure. Moreover, both the roughened structure and the hydrophobic materials of the STA endow the alumina films with the strong water-repellence.

  13. Formation process of a strong water-repellent alumina surface by the sol-gel method

    Science.gov (United States)

    Feng, Libang; Li, Hui; Song, Yongfeng; Wang, Yulong

    2010-03-01

    A novel strong water-repellent alumina thin film is fabricated by chemically adsorbing stearic acid (STA) layer onto the porous and roughened aluminum film coated with polyethyleneimine (PEI). The formation process and the structure of the strong water-repellent alumina film are investigated by means of contact angle measurement and atomic force microscope (AFM). Results show that the water contact angles for the alumina films increase with the increase of the immersion time in the boiling water, and meanwhile, the roughness of the alumina films increases with the dissolution of the boehmite in the boiling water. Finally, the strong water-repellent film with a high water contact angle of 139.1° is obtained when the alumina films have distinct roughened morphology with some papillary peaks and porous structure. Moreover, both the roughened structure and the hydrophobic materials of the STA endow the alumina films with the strong water-repellence.

  14. A Study on the Effect of Nano Alumina Particles on Fracture Behavior of PMMA

    Directory of Open Access Journals (Sweden)

    Arezou Sezavar

    2015-04-01

    Full Text Available In the current research, the role of nano-sized alumina on deformation and fracture mechanism of Poly Methyl Methacrylate (PMMA was investigated. For this purpose, PMMA matrix nanocomposite reinforced with different wt% of alumina (i.e., 5, 10 and 15 were fabricated using the compression molding technique. Tensile properties of produced nanocomposites were studied using Zwick Z250 apparatus at cross head speed of about 5 mm/min. In order to specify the role of alumina nanoparticles on deformation and fracture mechanism of PMMA, microscopic evaluation was performed using scanning electron microscope (SEM. The achieved results prove that tensile properties of PMMA depend on alumina wt%. For example, addition of 15 wt% alumina to PMMA causes an increase of about 25% modulus of elasticity. Micrographs taken from the fracture surface of PMMA and its nanocomposites show deformation and fracture mechanism of PMMA changes as alumina is added to it.

  15. Comparative study on sintered alumina for ballistic shielding application; Estudo comparativo entre aluminas sinterizadas visando aplicacao em blindagem balistica

    Energy Technology Data Exchange (ETDEWEB)

    Melo, Francisco Cristovao Lourenco de; Goncalves, Diniz Pereira [Centro Tecnico Aeroespacial (CTA), Sao Jose dos Campos, SP (Brazil). Inst. de Aeronautica e Espaco

    1997-12-31

    This work presents a development of the armor made from special ceramic materials and kevlar. An experimental investigation was conducted to study the ballistic penetration resistance on three samples taken from sintered alumina: a commercial one and two formulations A and B made in IAE/CTA. The main differences between the two formulations was the grain size and bend resistance. The knowledge of the mechanisms during the penetration and perforation process allowed to apply a ductile composite laminate made form kevlar under the alumina to delay its rupture. The last ballistic test showed how a Weibull`s modulii and other mechanical properties are able to improve ballistic penetration resistance. (author) 3 refs.

  16. Effect of Heat Treatment of the Alumina Powder on the Microstructure and Properties of Coatings

    Directory of Open Access Journals (Sweden)

    Prozorova Mayya

    2015-01-01

    Full Text Available The alumina powder was treated at a high temperature (1000°C. Dense (porosity of less than 2%, solid (1280 ± 30 HV0.3 and wear-resistant coatings based on heat-treated alumina powder were obtained by a multi-chamber detonation sprayer on the steel substrate. The microstructure, microhardness and the wear resistance of the alumina coatings were investigated.

  17. The Effect of Alumina Dispersant Powder on the Workability of Chromia Based Refractory for IGCC Application

    Science.gov (United States)

    Ming, Zhao Jing; Xun, Yang Zheng; Hong, Hwang Kyu; Hwan, Park Sang

    2011-10-01

    The quality of refractory applied on IGCC is a key factor that affects the cost of production. The workability and microstructure of chromia based castable are varied by introducing different type of alumina dispersant powder, such as active alumina powder. In this study, three types of active alumina powder are added to improve the workability. It's proved that the specific surface area and particle size distribution of fine powders in matrix part greatly affect the flow values and microstructures.

  18. Bosonic Anomalies in Boron-Doped Polycrystalline Diamond

    Science.gov (United States)

    Zhang, Gufei; Samuely, Tomas; Kačmarčík, Jozef; Ekimov, Evgeny A.; Li, Jun; Vanacken, Johan; Szabó, Pavol; Huang, Junwei; Pereira, Paulo J.; Cerbu, Dorin; Moshchalkov, Victor V.

    2016-12-01

    Quantum confinement and coherence effects are considered the cause of many specific features for systems which are generally low dimensional, strongly disordered, and/or situated in the vicinity of the metal-insulator transition. Here, we report on the observation of anomalous resistance peak and specific heat peaks superimposed at the superconducting transition of heavily boron-doped polycrystalline bulk diamond, which is a three-dimensional system situated deep on the metallic side of the boron-doping-driven metal-insulator transition in diamond. The anomalous resistance peak and specific heat peaks are interpreted as a result of confinement and coherence effects in the presence of intrinsic and extrinsic granularity. Our data, obtained for superconducting diamond, provide a reference for understanding the superconductivity in other granular disordered systems. Furthermore, our study brings attention to the significant influence of granular disorder on the physical properties of boron-doped diamond, which is considered a promising candidate for electronics applications.

  19. Creep behavior for advanced polycrystalline SiC fibers

    Energy Technology Data Exchange (ETDEWEB)

    Youngblood, G.E.; Jones, R.H. [Pacific Northwest National Lab., Richland, WA (United States); Kohyama, Akira [Kyoto Univ. (Japan)] [and others

    1997-04-01

    A bend stress relaxation (BSR) test has been utilized to examine irradiation enhanced creep in polycrystalline SiC fibers which are under development for use as fiber reinforcement in SiC/SiC composite. Qualitative, S-shaped 1hr BSR curves were compared for three selected advanced SiC fiber types and standard Nicalon CG fiber. The temperature corresponding to the middle of the S-curve (where the BSR parameter m = 0.5) is a measure of a fiber`s thermal stability as well as it creep resistance. In order of decreasing thermal creep resistance, the measured transition temperatures were Nicalon S (1450{degrees}C), Sylramic (1420{degrees}C), Hi-Nicalon (1230{degrees}C) and Nicalon CG (1110{degrees}C).

  20. Grain boundaries in polycrystalline Si solar cells Impurities and passivation

    Science.gov (United States)

    Kazmerski, L. L.

    The interrelationships among the chemistry and composition of the intergrain regions, the electro-optical properties of the grain boundaries, and the resulting photovoltaic performance of polycrystalline Si solar cells are examined. Specifically, two impurity-related mechanisms are reported. The first is that of the segregation of oxygen to the grain boundaries during thermal processing of the material/devices. Direct evidence is presented that correlates this oxygen localization to the electrical activation of the grain boundaries. The second is the passivation of the grain boundaries by incorporation of hydrogen in these regions. The localization of hydrogen at the intergrain defects is shown by surface analysis methods, and the effects on the electrical characteristics of the grain boundary and the solar cells are reported.

  1. Resistive switching in polycrystalline YMnO3 thin films

    Directory of Open Access Journals (Sweden)

    A. Bogusz

    2014-10-01

    Full Text Available We report a unipolar, nonvolatile resistive switching in polycrystalline YMnO3 thin films grown by pulsed laser deposition and sandwiched between Au top and Ti/Pt bottom electrodes. The ratio of the resistance in the OFF and ON state is larger than 103. The observed phenomena can be attributed to the formation and rupture of conductive filaments within the multiferroic YMnO3 film. The generation of conductive paths under applied electric field is discussed in terms of the presence of grain boundaries and charged domain walls inherently formed in hexagonal YMnO3. Our findings suggest that engineering of the ferroelectric domains might be a promising route for designing and fabrication of novel resistive switching devices.

  2. Modeling Copper Diffusion in Polycrystalline CdTe Solar Cells

    Energy Technology Data Exchange (ETDEWEB)

    Akis, Richard [Arizona State University; Brinkman, Daniel [Arizona State University; Sankin, Igor [First Solar; Fang, Tian [First Solar; Guo, Da [Arizona State Univeristy; Vasileska, Dragica [Arizona State University; Ringhofer, Christain [Arizona State University

    2014-06-06

    It is well known that Cu plays an important role in CdTe solar cell performance as a dopant. In this work, a finite-difference method is developed and used to simulate Cu diffusion in CdTe solar cells. In the simulations, which are done on a two-dimensional (2D) domain, the CdTe is assumed to be polycrystalline, with the individual grains separated by grain boundaries. When used to fit experimental Cu concentration data, bulk and grain boundary diffusion coefficients and activation energies for CdTe can be extracted. In the past, diffusion coefficients have been typically obtained by fitting data to simple functional forms of limited validity. By doing full simulations, the simplifying assumptions used in those analytical models are avoided and diffusion parameters can thus be determined more accurately

  3. Extracting Cu Diffusion Parameters in Polycrystalline CdTe

    Energy Technology Data Exchange (ETDEWEB)

    Akis, Richard [Arizona State Univeristy; Brinkman, Daniel [Arizona State Univeristy; Sankin, Igor [First Solar; Fang, Tian [First Solar; Guo, Da [Arizona State Univeristy; Dragica, Vasileska [Arizona State Univeristy; Ringhofer, Christian [Arizona State University

    2014-06-13

    It is well known that Cu plays an important role in CdTe solar cell performance as a dopant. In this work, a finite-difference method is developed and used to simulate Cu diffusion in CdTe solar cells. In the simulations, which are done on a two-dimensional (2D) domain, the CdTe is assumed to be polycrystal-line, with the individual grains separated by grain boundaries. When used to fit experimental Cu concentration data, bulk and grain boundary diffusion coefficients and activation energies for CdTe can be extracted. In the past, diffusion coefficients have been typically obtained by fitting data to simple functional forms of limited validity. By doing full simulations, the simplifying assumptions used in those analytical models are avoided and diffusion parameters can thus be determined more accurately.

  4. Physically-based modelling of polycrystalline semiconductor devices

    CERN Document Server

    Lee, S

    2000-01-01

    model and characterisation method are introduced to study the effects of the multienergetic trap states on the electrical characteristics of poly-TFTs using CdSe devices as the experimental example, and the electrical parameters such as the density distribution of the trapping states are extracted. The results show excellent agreement between the simulation and experimental data. The limitations of this proposed physical model are also studied and discussed. Thin-film technology using polycrystalline semiconductors has been widely applied to active-matrix-addressed liquid crystal displays (AMLCDs) where thin-film transistors act as digital pixel switches. Research and development is in progress to integrate the driver circuits around the peripheral of the display, resulting in significant cost reduction of connections between rows and columns and the peripheral circuitry. For this latter application, where for instance it is important to control the greyscale voltage level delivered to the pixel, an understan...

  5. Magnetization collapse in polycrystalline YBCO under transport current cycles

    Energy Technology Data Exchange (ETDEWEB)

    Giordano, J L [Departamento de Ciencias de la IngenierIa, Universidad de Talca (Chile); Luzuriaga, J [Centro Atomico Bariloche, CNEA, Instituto Balseiro, UNC (Argentina); BadIa-Majos, A [Departamento de Fisica de la Materia Condensada-ICMA, Universidad de Zaragoza (Spain); Nieva, G [Centro Atomico Bariloche, CNEA, Instituto Balseiro, UNC (Argentina); RuIz-Tagle, I [Instituto de QuImica de Recursos Naturales, Universidad de Talca (Chile)

    2006-04-15

    We report measurements of the hysteretic magnetization of YBCO under superimposed transport current cycles, together with numerical simulations of magnetization and current density profiles in the corresponding parallel configuration. Field cooled (FC) and zero-field-cooled (ZFC) experiments were carried out on polycrystalline YBa{sub 2}Cu{sub 3}O{sub 7-x} cylinders, with both the applied magnetic field and transport current in the axial direction, and the current cycled several times, around and above the dissipative threshold. As in previously reported multicomponent field configuration experiments, the magnetization is seen to collapse to a more stable state both in FC and ZFC, because of the interplay between the shielding and transport currents. The results of our numerical simulations are in good qualitative agreement with the measurements, and the competition between shielding and transport due to vortex-pinning interactions and equilibrium magnetization effects are shown to play an important role in the range of our experiments.

  6. Predicting fracture in micron-scale polycrystalline silicon MEMS structures.

    Energy Technology Data Exchange (ETDEWEB)

    Hazra, Siddharth S. (Carnegie Mellon University, Pittsburgh, PA); de Boer, Maarten Pieter (Carnegie Mellon University, Pittsburgh, PA); Boyce, Brad Lee; Ohlhausen, James Anthony; Foulk, James W., III; Reedy, Earl David, Jr.

    2010-09-01

    Designing reliable MEMS structures presents numerous challenges. Polycrystalline silicon fractures in a brittle manner with considerable variability in measured strength. Furthermore, it is not clear how to use a measured tensile strength distribution to predict the strength of a complex MEMS structure. To address such issues, two recently developed high throughput MEMS tensile test techniques have been used to measure strength distribution tails. The measured tensile strength distributions enable the definition of a threshold strength as well as an inferred maximum flaw size. The nature of strength-controlling flaws has been identified and sources of the observed variation in strength investigated. A double edge-notched specimen geometry was also tested to study the effect of a severe, micron-scale stress concentration on the measured strength distribution. Strength-based, Weibull-based, and fracture mechanics-based failure analyses were performed and compared with the experimental results.

  7. Phosphorus Doping of Polycrystalline CdTe by Diffusion

    Energy Technology Data Exchange (ETDEWEB)

    Colegrove, Eric; Albin, David S.; Guthrey, Harvey; Harvey, Steve; Burst, James; Moutinho, Helio; Farrell, Stuart; Al-Jassim, Mowafak; Metzger, Wyatt K.

    2015-06-14

    Phosphorus diffusion in single crystal and polycrystalline CdTe material is explored using various methods. Dynamic secondary ion mass spectroscopy (SIMS) is used to determine 1D P diffusion profiles. A 2D diffusion model is used to determine the expected cross-sectional distribution of P in CdTe after diffusion anneals. Time of flight SIMS and cross-sectional cathodoluminescence corroborates expected P distributions. Devices fabricated with diffused P exhibit hole concentrations up to low 1015 cm-3, however a subsequent activation anneal enabled hole concentrations greater than 1016 cm-3. CdCl2 treatments and Cu based contacts were also explored in conjunction with the P doping process.

  8. Polycrystalline diamond MEMS resonator technology for sensor applications.

    Energy Technology Data Exchange (ETDEWEB)

    Sullivan, John P.; Aslam, Dean (Michigan State University, East Lansing, MI); Sepulveda-Alancastro, Nelson (Michigan State University, East Lansing, MI)

    2005-07-01

    Due to material limitations of poly-Si resonators, polycrystalline diamond (poly-C) has been explored as a new MEMS resonator material. The poly-C resonators are designed, fabricated and tested using electrostatic (Michigan State University) and piezoelectric (Sandia National Laboratories) actuation methods, and the results are compared. For comparable resonator structures, although the resonance frequencies are similar, the measured Q values in the ranges of 1000-2000 and 10,000-15,000 are obtained for electrostatic and piezoelectric actuation methods, respectively. The difference in Q for the two methods is related to different pressures used during the measurement and not to the method of measurement. For the poly-C cantilever beam resonators, the highest value of their quality factor (Q) is reported for the first time (15,263).

  9. Development of transparent polycrystalline beta-silicon carbide

    Science.gov (United States)

    Bayya, Shyam S.; Villalobos, Guillermo R.; Hunt, Michael P.; Sanghera, Jasbinder S.; Sadowski, Bryan M.; Aggarwal, Ishwar D.; Cinibulk, Michael; Carney, Carmen; Keller, Kristin

    2013-09-01

    Transparent beta-SiC is of great interest because its high strength, low coefficient of thermal expansion, very high thermal conductivity, and cubic crystal structure give it a very high thermal shock resistance. A transparent, polycrystalline beta-SiC window will find applications in armor, hypersonic missiles, and thermal control for thin disc lasers. SiC is currently available as either small transparent vapor grown disks or larger opaque shapes. Neither of which are useful in window applications. We are developing sintering technology to enable transparent SiC ceramics. This involves developing procedures to make high purity powders and studying their densification behavior. We have been successful in demonstrating transparency in thin sections using Field Assisted Sintering Technology (FAST). This paper will discuss the reaction mechanisms in the formation of beta-SiC powder and its sintering behavior in producing transparent ceramics.

  10. Friction behavior of Al-Cu-Fe-B polycrystalline quasicrystals

    Institute of Scientific and Technical Information of China (English)

    周细应; 李培耀; 罗军明; 钱士强; 童建华

    2004-01-01

    Dry sliding friction between the polycrystalline Al59 Cu25.5 Fe12.5 B3 quasicrystals(QCs) and coating of thediamond-like carbon(DLC) was carried out by self-made tribometer under different conditions. The influences of four parameters(temperature, sliding velocity, applied load, atmosphere) on friction of quasicrystal surface were studied. Microstructure of quasicrystal, morphology of worn surface, and wear debris were observed by scanning electron microscope(SEM). The results show that for QCs, the friction coefficient and the roughness of worn surface is influenced by the parameters, especially greatly by the temperature. With increasing the applied load and sliding velocity, the friction coefficient decreases. The dominant wear mechanism at 350 ℃ is delamination for QCs. The cracks forms on the worn surface during friction. Moreover, phase transformation is not observed on worn surface of QCs at 350 ℃.

  11. Physical properties optimization of polycrystalline LiFeAs

    Energy Technology Data Exchange (ETDEWEB)

    Singh, Shiv J., E-mail: s.j.singh@ifw-dresden.de [Leibniz-Institute for Solid State and Material Research, IFW-Dresden, 01171 Dresden Germany (Germany); Research Center for Environmentally Friendly Materials Engineering, Muroran Institute of Technology, 27-1 Mizumoto-cho, Muroran, Hokkaido, 050-8585 (Japan); Gräfe, Uwe; Beck, Robert; Wolter, Anja U.B.; Grafe, Hans-Joachim [Leibniz-Institute for Solid State and Material Research, IFW-Dresden, 01171 Dresden Germany (Germany); Hess, Christian [Leibniz-Institute for Solid State and Material Research, IFW-Dresden, 01171 Dresden Germany (Germany); Center for Transport and Devices of Emergent Materials, Technische Universität Dresden, 01069 Dresden (Germany); Wurmehl, Sabine [Leibniz-Institute for Solid State and Material Research, IFW-Dresden, 01171 Dresden Germany (Germany); Institut für Festkörperphysik, Technische Universität Dresden, 01069 Dresden (Germany); Büchner, Bernd [Leibniz-Institute for Solid State and Material Research, IFW-Dresden, 01171 Dresden Germany (Germany); Center for Transport and Devices of Emergent Materials, Technische Universität Dresden, 01069 Dresden (Germany); Institut für Festkörperphysik, Technische Universität Dresden, 01069 Dresden (Germany)

    2016-10-15

    Highlights: • Synthesis of polycrystalline LiFeAs in a very broad heating temp. range (200–900 °C). • These samples are characterized by various physical and magnetic measurements. • Interestingly, the LiFeAs phase starts to form at 200 °C with T{sub c} of 19.2 K. • 600 °C synthesis temperature yields optimal high quality polycrystalline LiFeAs. • The properties of the best sample are consistent with that of LiFeAs single crystal. - Abstract: We present a study of parameter optimization for synthesizing truly stoichiometric polycrystalline LiFeAs. Stoichiometric LiFeAs has been prepared in a very broad range of synthesis temperature (200–900 °C) under otherwise exactly the same conditions, and has been characterized by structural, magnetic, transport, nuclear quadrupole resonance (NQR), and specific heat measurements. Our study showed that the LiFeAs phase is formed at 200 °C with a large amount of impurity phases. The amount of these impurity phases reduces with increasing synthesis temperature and the clean LiFeAs phase is obtained at a synthesis temperature of 600 °C. Magnetic susceptibility and resistivity measurements confirmed that the superconducting properties such as the critical temperature T{sub c}, and the upper critical field H{sub c2} do not depend on the synthesis temperature (≤ 700 °C), remaining at almost the same value of ∼19 K and ∼40 T, respectively. However, the width ΔT{sub c} of the transition and the NQR line width decrease with increasing the synthesis temperature and reached to minimum value for the synthesis temperature of 600 °C. Our careful analysis suggests that the best sample obtained at 600 °C is optimal concerning the low resistivity, high residual resistivity ratio (RRR), low ΔT{sub c}, high T{sub c} and H{sub c2}, and a small NQR line width with values which are comparable to that reported for LiFeAs single crystals. Specific heat measurements confirmed the bulk superconducting nature of the samples

  12. Defect engineering by ultrasound treatment in polycrystalline silicon

    Energy Technology Data Exchange (ETDEWEB)

    Ostapenko, S.; Jastrzebski, L. [Univ. of South Florida, Tampa, FL (United States)

    1995-08-01

    By applying ultrasound treatment (UST) to bulk and thin film polycrystalline Si (poly-Si) we have found a dramatic improvement of recombination and transport properties. The increasing of minority carrier lifetime by as much as one order of magnitude was found in short diffusion length regions, while exhibiting a strong dispersion for entire solar-grade poly-Si wafer. Relevant mechanisms are attributed to ultrasound processing on crystallographic defects, as well as UST stimulated dissociation of Fe-B pairs followed by Fe{sub i} gettering. A spectacular improvement of hydrogenation efficiency in poly-Si thin-films on glass substrate is demonstrated by resistivity study and confirmed using spatially resolved photoluminescence and nanoscale contact potential difference mapping. By applying UST to commercial solar cells we found the increasing of cell efficiency at low light excitation.

  13. Radiation hardness of three-dimensional polycrystalline diamond detectors

    Energy Technology Data Exchange (ETDEWEB)

    Lagomarsino, Stefano, E-mail: lagomarsino@fi.infn.it; Sciortino, Silvio [National Institute of Nuclear Physics (INFN), Via B. Rossi, 1-3, 50019 Sesto Fiorentino (Italy); Department of Physics and Astronomy, University of Florence, Via G. Sansone 1, 50019 Sesto Fiorentino (Italy); Bellini, Marco [European Laboratory for Non-Linear Spectroscopy, Via Nello Carrara 1, 50019 Sesto Fiorentino (Italy); Istituto Nazionale di Ottica (INO-CNR), Largo Enrico Fermi 6, 50125 Firenze (Italy); Corsi, Chiara [Department of Physics and Astronomy, University of Florence, Via G. Sansone 1, 50019 Sesto Fiorentino (Italy); European Laboratory for Non-Linear Spectroscopy, Via Nello Carrara 1, 50019 Sesto Fiorentino (Italy); Cindro, Vladimir [Jozef Stefan Institute, Jamova cesta 39, 1000 Ljubljana (Slovenia); Kanxheri, Keida; Servoli, Leonello [National Institute of Nuclear Physics (INFN), Via A. Pascoli, 06123 Perugia (Italy); Department of Physics, University of Perugia, Via A. Pascoli, 06123 Perugia (Italy); Morozzi, Arianna [Department of Engineering, University of Perugia, Via G. Duranti 93, 06125 Perugia (Italy); Passeri, Daniele [National Institute of Nuclear Physics (INFN), Via A. Pascoli, 06123 Perugia (Italy); Department of Engineering, University of Perugia, Via G. Duranti 93, 06125 Perugia (Italy); Schmidt, Christian J. [GSI Helmholtzzentrum für Schwerionenforschung, Planckstraße 1, 64291 Darmstadt (Germany)

    2015-05-11

    The three-dimensional concept in particle detection is based on the fabrication of columnar electrodes perpendicular to the surface of a solid state radiation sensor. It permits to improve the radiation resistance characteristics of a material by lowering the necessary bias voltage and shortening the charge carrier path inside the material. If applied to a long-recognized exceptionally radiation-hard material like diamond, this concept promises to pave the way to the realization of detectors of unprecedented performances. We fabricated conventional and three-dimensional polycrystalline diamond detectors, and tested them before and after neutron damage up to 1.2 ×10{sup 16 }cm{sup −2}, 1 MeV-equivalent neutron fluence. We found that the signal collected by the three-dimensional detectors is up to three times higher than that of the conventional planar ones, at the highest neutron damage ever experimented.

  14. Ferrous polycrystalline shape-memory alloy showing huge superelasticity.

    Science.gov (United States)

    Tanaka, Y; Himuro, Y; Kainuma, R; Sutou, Y; Omori, T; Ishida, K

    2010-03-19

    Shape-memory alloys, such as Ni-Ti and Cu-Zn-Al, show a large reversible strain of more than several percent due to superelasticity. In particular, the Ni-Ti-based alloy, which exhibits some ductility and excellent superelastic strain, is the only superelastic material available for practical applications at present. We herein describe a ferrous polycrystalline, high-strength, shape-memory alloy exhibiting a superelastic strain of more than 13%, with a tensile strength above 1 gigapascal, which is almost twice the maximum superelastic strain obtained in the Ni-Ti alloys. Furthermore, this ferrous alloy has a very large damping capacity and exhibits a large reversible change in magnetization during loading and unloading. This ferrous shape-memory alloy has great potential as a high-damping and sensor material.

  15. Polycrystalline CVD diamond device level modeling for particle detection applications

    Science.gov (United States)

    Morozzi, A.; Passeri, D.; Kanxheri, K.; Servoli, L.; Lagomarsino, S.; Sciortino, S.

    2016-12-01

    Diamond is a promising material whose excellent physical properties foster its use for radiation detection applications, in particular in those hostile operating environments where the silicon-based detectors behavior is limited due to the high radiation fluence. Within this framework, the application of Technology Computer Aided Design (TCAD) simulation tools is highly envisaged for the study, the optimization and the predictive analysis of sensing devices. Since the novelty of using diamond in electronics, this material is not included in the library of commercial, state-of-the-art TCAD software tools. In this work, we propose the development, the application and the validation of numerical models to simulate the electrical behavior of polycrystalline (pc)CVD diamond conceived for diamond sensors for particle detection. The model focuses on the characterization of a physically-based pcCVD diamond bandgap taking into account deep-level defects acting as recombination centers and/or trap states. While a definite picture of the polycrystalline diamond band-gap is still debated, the effect of the main parameters (e.g. trap densities, capture cross-sections, etc.) can be deeply investigated thanks to the simulated approach. The charge collection efficiency due to β -particle irradiation of diamond materials provided by different vendors and with different electrode configurations has been selected as figure of merit for the model validation. The good agreement between measurements and simulation findings, keeping the traps density as the only one fitting parameter, assesses the suitability of the TCAD modeling approach as a predictive tool for the design and the optimization of diamond-based radiation detectors.

  16. Imaging with polycrystalline mercuric iodide detectors using VLSI readout

    Energy Technology Data Exchange (ETDEWEB)

    Turchetta, R.; Dulinski, W.; Husson, D.; Riester, J.L.; Schieber, M.; Zuck, A.; Melekhov, L.; Saado, Y.; Hermon, H.; Nissenbaum, J

    1999-06-01

    Potentially low cost and large area polycrystalline mercuric iodide room-temperature radiation detectors, with thickness of 100-600 {mu}m have been successfully tested with dedicated low-noise, low-power mixed signal VLSI electronics which can be used for compact, imaging solutions. The detectors are fabricated by depositing HgI{sub 2} directly on an insulating substrate having electrodes in the form of microstrips and pixels with an upper continuous electrode. The deposition is made either by direct evaporation or by screen printing HgI{sub 2} mixed with glue such as Poly-Vinyl-Butiral. The properties of these first-generation detectors are quite uniform from one detector to another. Also for each single detector the response is quite uniform and no charge loss in the inter-electrode space have been detected. Because of the low cost and of the polycrystallinity, detectors can be potentially fabricated in any size and shape, using standard ceramic technology equipment, which is an attractive feature where low cost and large area applications are needed. The detectors which act as radiation counters have been tested with a beta source as well as in a high-energy beam of 100 GeV muons at CERN, connected to VLSI, low noise electronics. Charge collection efficiency and uniformity have been studied. The charge is efficiently collected even in the space between strips indicating that fill factors of 100% could be reached in imaging applications with direct detection of radiation. Single photon counting capability is reached with VLSI electronics. These results show the potential of this material for applications demanding position sensitive, radiation resistant, room-temperature operating radiation detectors, where position resolution is essential, as it can be found in some applications in high-energy physics, nuclear medicine and astrophysics.

  17. Growth of textured mullite fibers using polycrystalline precursors

    Science.gov (United States)

    Yoon, Wonki

    Fine ceramic oxide fibers are widely used as reinforcements in composites for high temperature applications. The primary goal of this research was to investigate the growth of textured or single crystal oxide fibers by heat treatment of polycrystalline or amorphous, extruded precursor fibers. Mullite was selected for this study due to its excellent chemical stability, creep resistance and strength at high temperatures. Micrographic analysis and in-situ synchrotron X-ray diffraction analysis have been performed on mullite systems in order to study the anisotropic grain growth and the effect of titania additions in mullite. The estimated activation energies from the SEM micrographic particle size analysis were 644.3 kJ/mol and 773.7 kJ/mol for the length and thickness, respectively. An in-situ synchrotron X-ray diffraction microstructure analysis was done with a Curved Image Plate (CIP) detector and the fiber was heat treated in a QLF. The apparent crystallite size showed anisotropy in crystallite growth. Furthermore, a higher growth rate along the [001] direction than the [110] direction was observed. Mullite whiskers were prepared by HF leaching and templated into polycrystalline mullite fibers by extrusion. Textured growth of mullite fibers with elongated grains, aligned along the long-axis of the fibers, was achieved by heat treatment. Repeated heat treatment cycles of a whisker-templated fiber showed a bamboo-like microstructure. It was confirmed by SEM, TEM and optical microscopy (OM) that the growth direction along the fiber length was the [001] direction of orthorhombic mullite.

  18. High field matching effects in superconducting Nb porous arrays catalyzed from anodic alumina templates

    DEFF Research Database (Denmark)

    Vinckx, W.; Vanacken, J.; Moshchalkov, V.V.;

    2007-01-01

    Vortex pinning in a superconducting Nb thin film deposited on an anodically grown alumina template is investigated. Anodic oxidation of aluminium layers permits under specific conditions the formation of highly ordered porous alumina, a membrane-like structure consisting of triangular arrays...... of parallel pores. Its pore diameter and interpore distance are set by careful tuning of the anodization parameters. A superconducting Nb thin film is deposited directly onto the alumina film. The porous alumina acts as a template and it allows Nb to form a periodic pinning array during its growth. Pinning...

  19. The effect of alumina nanofillers size and shape on mechanical behavior of PMMA matrix composite

    Directory of Open Access Journals (Sweden)

    Ben Hasan Somaya Ahmed

    2014-01-01

    Full Text Available Composites with the addition of alumina nanofillers show improvement in mechanical properties. The PMMA polymer was used as a matrix and two different types of nanofillers, having extremely different shapes were added in the matrix to form the composite. Reinforcements were based on alumina nanoparticles having either spherical shape or whiskers having the length to diameter ratio of 100. The influence of alumina fillers size, shape and fillers loading on mechanical properties of prepared composite were studied using the nanoindentation measurements and dynamic mechanical analysis. It was observed that both alumina whiskers and alumina spherical nanoparticles added in the PMMA matrix improved the mechanical properties of the composite but the improvement was significantly higher with alumina whisker reinforcement. The concentration of the reinforcing alumina spherical nanoparticles and alumina whiskers in PMMA matrix varied up to 5 wt. %. The best performance was obtained by the addition of 3 wt. % of alumina whiskers in the PMMA matrix with regard to mechanical properties of the obtained composite.

  20. On the possibility of producing alumina ceramic with a slight electrical conductivity

    CERN Document Server

    Caspers, Fritz

    1989-01-01

    Antistatic alumina ceramic is desirable for certain particle accelerator applications. In general, highly insulating surface close to a charged particle beam must be avoided in order to prevent the formation of ion pockets and other unwanted electrical effects. For the AA vacuum chamber (UHV), an antistatic ferrite has been produced and successfully installed. The fabrication of antistatic alumina might be possible in a similar way. By using certain metal oxides in the cement, which holds the alumina particles together, a slight conductivity could be obtained after the firing and sintering process, without deteriorating the mechanical and outgassing properties of the alumina compound.

  1. Surface insulating properties of titanium implanted alumina ceramics by plasma immersion ion implantation

    Science.gov (United States)

    Zhu, Mingdong; Song, Falun; Li, Fei; Jin, Xiao; Wang, Xiaofeng; Wang, Langping

    2017-09-01

    The insulating property of the alumina ceramic in vacuum under high voltage is mainly limited by its surface properties. Plasma immersion ion implantation (PIII) is an effective method to modify the surface chemical and physical properties of the alumina ceramic. In order to improve the surface flashover voltage of the alumina ceramic in vacuum, titanium ions with an energy of about 20 keV were implanted into the surface of the alumina ceramic using the PIII method. The surface properties of the as-implanted samples, such as the chemical states of the titanium, morphology and surface resistivity, were characterized by X-ray photoelectron spectroscopy, scanning electron microscope and electrometer, respectively. The surface flashover voltages of the as-implanted alumina samples were measured by a vacuum surface flashover experimental system. The XPS spectra revealed that a compound of Ti, TiO2 and Al2O3 was formed in the inner surface of the alumina sample. The electrometer results showed that the surface resistivity of the implanted alumina decreased with increased implantation time. In addition, after the titanium ion implantation, the maximum hold-off voltage of alumina was increased to 38.4 kV, which was 21.5% higher than that of the unimplanted alumina ceramic.

  2. Deformation Behavior of Sub-micron and Micron Sized Alumina Particles in Compression.

    Energy Technology Data Exchange (ETDEWEB)

    Sarobol, Pylin; Chandross, Michael E.; Carroll, Jay; Mook, William; Boyce, Brad; Kotula, Paul Gabriel; McKenzie, Bonnie Beth; Bufford, Daniel Charles; Hall, Aaron Christopher.

    2014-09-01

    The ability to integrate ceramics with other materials has been limited due to high temperature (>800degC) ceramic processing. Recently, researchers demonstrated a novel process , aerosol deposition (AD), to fabricate ceramic films at room temperature (RT). In this process, sub - micro n sized ceramic particles are accelerated by pressurized gas, impacted on the substrate, plastically deformed, and form a dense film under vacuum. This AD process eliminates high temperature processing thereby enabling new coatings and device integration, in which ceramics can be deposited on metals, plastics, and glass. However, k nowledge in fundamental mechanisms for ceramic particle s to deform and form a dense ceramic film is still needed and is essential in advancing this novel RT technology. In this wo rk, a combination of experimentation and atomistic simulation was used to determine the deformation behavior of sub - micron sized ceramic particle s ; this is the first fundamental step needed to explain coating formation in the AD process . High purity, singl e crystal, alpha alumina particles with nominal size s of 0.3 um and 3.0 um were examined. Particle characterization, using transmission electron microscopy (TEM ), showed that the 0.3 u m particles were relatively defect - free single crystals whereas 3.0 u m p articles were highly defective single crystals or particles contained low angle grain boundaries. Sub - micron sized Al 2 O 3 particles exhibited ductile failure in compression. In situ compression experiments showed 0.3um particles deformed plastically, fractured, and became polycrystalline. Moreover, dislocation activit y was observed within the se particles during compression . These sub - micron sized Al 2 O 3 particles exhibited large accum ulated strain (2 - 3 times those of micron - sized particles) before first fracture. I n agreement with the findings from experimentation , a tomistic simulation s of nano - Al 2 O 3 particles showed dislocation slip and

  3. PENGARUH PERBEDAAN SIFAT PENYANGGA ALUMINA TERHADAP SIFAT KATALIS HYDROTREATING BERBASIS NIKEL-MOLIBDENUM

    Directory of Open Access Journals (Sweden)

    Maria Ulfah

    2012-11-01

    Full Text Available EFFECT OF ALUMINA SUPPORT PROPERTIES ON THE NICKEL-MOLIBDENUM BASE HYDROTREATING CATALYST. Effect of surface characteristics of three species of synthesized γ-alumina (alumina-1, alumina-2 and alumina-3 on characteristics NiMo catalysts has been studied. Those aluminas are derived from boehmite Catapal B by varying rasio mol nitric acid to boehmite. A sol-gel method is used to synthesize γ-Al2O3 support. The Nitrogen adsorption, X-ray diffraction (XRD, Temperature Programmed Reduction (TPR of H2, Temperature Programmed Desorption (TPD of NH3, and mechanical strength are used to characterize the supports and catalysts. The results showed that the surface area alumina affects the formation of crystalline MoO3 in the NiMo catalyst, while γ-Al2O3-3 support which has the highest surface area (about 195 m2/g compared to the other two types of alumina (>195 m2/g does not have a crystalline MoO3. The formation of crystalline MoO3 is not influenced by the acidity alumina. Based on the results of XRD, it is  indicated that the supported alumina-3 NiMo catalyst (having the highest acid strength shows that there is no presence of crystalline MoO3. Pore size distribution of support did not change significantly after the deposition of Ni and Mo oxides. Mechanical strength of support also affects the strength NiMo catalyst. Support alumina-3 which has the highest mechanical strength gives the mechanical strength of the highest NiMo catalyst. Pengaruh sifat penyangga γ-alumina hasil pengembangan (alumina-1, alumina-2 dan alumina-3 pada karakter katalis hydrotreating nikel-molibdenum (NiMo telah dipelajari. Ketiga jenis γ-alumina diturunkan dari boehmite “Catapal B” dengan menvariasikan nisbah mol asam nitrat terhadap boehmite. Pembuatan γ-alumina menggunakan metoda sol-gel. Adsorpsi Nitrogen, X-ray difraksi (XRD, Temperature Programmed Reduction (TPR H2, Temperature Programmed Desorption (TPD NH3, dan kekuatan mekanik digunakan untuk

  4. Viscosity of aqueous and cyanate ester suspensions containing alumina nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Lawler, Katherine [Iowa State Univ., Ames, IA (United States)

    2009-01-01

    The viscosities of both aqueous and cyanate ester monomer (BECy) based suspensions of alumina nanoparticle were studied. The applications for these suspensions are different: aqueous suspensions of alumina nanoparticles are used in the production of technical ceramics made by slip casting or tape casting, and the BECy based suspensions are being developed for use in an injection-type composite repair resin. In the case of aqueous suspensions, it is advantageous to achieve a high solids content with low viscosity in order to produce a high quality product. The addition of a dispersant is useful so that higher solids content suspensions can be used with lower viscosities. For BECy suspensions, the addition of nanoparticles to the BECy resin is expected to enhance the mechanical properties of the cured composite. The addition of saccharides to aqueous suspensions leads to viscosity reduction. Through DSC measurements it was found that the saccharide molecules formed a solution with water and this resulted in lowering the melting temperature of the free water according to classic freezing point depression. Saccharides also lowered the melting temperature of the bound water, but this followed a different rule. The shear thinning and melting behaviors of the suspensions were used to develop a model based on fractal-type agglomeration. It is believed that the structure of the particle flocs in these suspensions changes with the addition of saccharides which leads to the resultant viscosity decrease. The viscosity of the BECy suspensions increased with solids content, and the viscosity increase was greater than predicted by the classical Einstein equation for dilute suspensions. Instead, the Mooney equation fits the viscosity behavior well from 0-20 vol% solids. The viscosity reduction achieved at high particle loadings by the addition of benzoic acid was also investigated by NMR. It appears that the benzoic acid interacts with the surface of the alumina particle which may

  5. Viscosity of aqueous and cyanate ester suspensions containing alumina nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Lawler, Katherine [Iowa State Univ., Ames, IA (United States)

    2009-01-01

    The viscosities of both aqueous and cyanate ester monomer (BECy) based suspensions of alumina nanoparticle were studied. The applications for these suspensions are different: aqueous suspensions of alumina nanoparticles are used in the production of technical ceramics made by slip casting or tape casting, and the BECy based suspensions are being developed for use in an injection-type composite repair resin. In the case of aqueous suspensions, it is advantageous to achieve a high solids content with low viscosity in order to produce a high quality product. The addition of a dispersant is useful so that higher solids content suspensions can be used with lower viscosities. For BECy suspensions, the addition of nanoparticles to the BECy resin is expected to enhance the mechanical properties of the cured composite. The addition of saccharides to aqueous suspensions leads to viscosity reduction. Through DSC measurements it was found that the saccharide molecules formed a solution with water and this resulted in lowering the melting temperature of the free water according to classic freezing point depression. Saccharides also lowered the melting temperature of the bound water, but this followed a different rule. The shear thinning and melting behaviors of the suspensions were used to develop a model based on fractal-type agglomeration. It is believed that the structure of the particle flocs in these suspensions changes with the addition of saccharides which leads to the resultant viscosity decrease. The viscosity of the BECy suspensions increased with solids content, and the viscosity increase was greater than predicted by the classical Einstein equation for dilute suspensions. Instead, the Mooney equation fits the viscosity behavior well from 0-20 vol% solids. The viscosity reduction achieved at high particle loadings by the addition of benzoic acid was also investigated by NMR. It appears that the benzoic acid interacts with the surface of the alumina particle which may

  6. Synthesis and optical properties of polycrystalline Li2Al2B2O7 (LABO)

    Science.gov (United States)

    Dagdale, S. R.; Muley, G. G.

    2016-05-01

    A polycrystalline lithium aluminum borate (Li2Al2B2O7, LABO) has been synthesized by using simple solid-state technique. The obtained LABO polycrystalline was characterized by powder X-ray diffraction; Fourier transform infrared (FT-IR) spectroscopy and second harmonic generation (SHG) efficiency measurement. The functional groups were identified using the FT-IR spectroscopic data. The SHG efficiency of the polycrystalline material was obtained by the classic Kurtz powder technique using a fundamental wavelength 1064 nm of Nd:YAG laser and it is found to be 1.4 times that of potassium dihydrogen phosphate (KDP).

  7. Polycrystalline GeSn thin films on Si formed by alloy evaporation

    Science.gov (United States)

    Kim, Munho; Fan, Wenjuan; Seo, Jung-Hun; Cho, Namki; Liu, Shih-Chia; Geng, Dalong; Liu, Yonghao; Gong, Shaoqin; Wang, Xudong; Zhou, Weidong; Ma, Zhenqiang

    2015-06-01

    Polycrystalline GeSn thin films on Si substrates with a Sn composition up to 4.5% have been fabricated and characterized. The crystalline structure, surface morphology, and infrared (IR) absorption coefficient of the annealed GeSn thin films were carefully investigated. It was found that the GeSn thin films with a Sn composition of 4.5% annealed at 450 °C possessed a desirable polycrystalline structure according to X-ray diffraction (XRD) analyses and Raman spectroscopy analyses. In addition, the absorption coefficient of the polycrystalline GeSn thin films in the IR region was significantly better than that of the single crystalline bulk Ge.

  8. Impact of graphene polycrystallinity on the performance of graphene field-effect transistors

    Energy Technology Data Exchange (ETDEWEB)

    Jiménez, David; Chaves, Ferney [Departament d' Enginyeria Electrònica, Escola d' Enginyeria, Universitat Autònoma de Barcelona, 08193-Bellaterra (Spain); Cummings, Aron W.; Van Tuan, Dinh [ICN2, Institut Català de Nanociencia i Nanotecnologia, Campus UAB, 08193 Bellaterra (Barcelona) (Spain); Kotakoski, Jani [Faculty of Physics, University of Vienna, Boltzmanngasse 5, 1090 Wien (Austria); Department of Physics, University of Helsinki, P.O. Box 43, 00014 University of Helsinki (Finland); Roche, Stephan [ICN2, Institut Català de Nanociencia i Nanotecnologia, Campus UAB, 08193 Bellaterra (Barcelona) (Spain); ICREA, Institució Catalana de Recerca i Estudis Avançats, 08070 Barcelona (Spain)

    2014-01-27

    We have used a multi-scale physics-based model to predict how the grain size and different grain boundary morphologies of polycrystalline graphene will impact the performance metrics of graphene field-effect transistors. We show that polycrystallinity has a negative impact on the transconductance, which translates to a severe degradation of the maximum and cutoff frequencies. On the other hand, polycrystallinity has a positive impact on current saturation, and a negligible effect on the intrinsic gain. These results reveal the complex role played by graphene grain boundaries and can be used to guide the further development and optimization of graphene-based electronic devices.

  9. 水溶性环氧树脂体系的氧化锆凝胶浇注成型%GELCASTING OF ZIRCONIA USING WATER SOLUBLE EPOXY RESIN AS GEL FORMER

    Institute of Scientific and Technical Information of China (English)

    董满江; 毛小建; 张兆泉; 刘茜

    2008-01-01

    研究了氧化锆凝胶浇注成型工艺中,水溶性环氧树脂凝胶剂对浆料的流变性和固化过程的影响.结果表明:环氧树脂的加入增加了浆料的黏度,但可制备固体含量为53.7%(体积分数),黏度为0.60Pa·s(剪切速率为100 s-1),适合浇注的浆料;为得到较高弹性模量的凝胶,固化剂(二丙三胺)最佳加入量为3.4%(质量分数);环氧树脂溶液的聚合过程和氧化锆浆料的固化过程对温度都具有较大的依赖性,利用这些依赖性可控制浆料的制备、浇注和固化过程.30℃时,浆料中环氧树脂的聚合反应在8min后开始,20min后浆料失去流动性,1 h后浆料完全固化,湿坯弹性模量达到1.96MPa.固化温度越高,浆料固化越快,固化后湿坯的弹性模量就越高.%Water soluble epoxy resin was used as gel former in the zirconia gelcasting process. The rheologieal properties and gelation behavior of the zirconia slurry were investigated. The rheological data shows that the slurry viscosity increases in the presence of epoxy resin. For the slurry with a solid phase content of 53.7% (in volume), the acceptable viscosity is about 0.60 Pa-s at 100 s-1. In order to obtain high elastic modulus polymer gel, the optional hardener (dipropylentriamin) content is 3.4% (in mass). Since the polymerization and gelation process depends greatly on the temperature, the gelation process can be controlled by controlling the temperature. At 30 ℃, the polymerization of epoxy resin in the slurry begins at 8 min. The slurry loses fluidity after 20 min, and slurry solidification is completed within 1h at 30--40 ℃. The elastic modulus (G')of the wet green bodies is 1.96 MPa. Compared with gelation at 30 ℃, the gelation process is hastened by higher temperature and results in higher G' of wet green bodies.

  10. Intermetallic strengthened alumina-forming austenitic steels for energy applications

    Science.gov (United States)

    Hu, Bin

    In order to achieve energy conversion efficiencies of >50 % for steam turbines/boilers in power generation systems, materials required are strong, corrosion-resistant at high temperatures (>700°C), and economically viable. Austenitic steels strengthened with Laves phase and Ni3Al precipitates, and alloyed with aluminum to improve oxidation resistance, are potential candidate materials for these applications. The creep resistance of these alloys is significantly improved through intermetallic strengthening (Laves-Fe 2Nb + L12-Ni3Al precipitates) without harmful effects on oxidation resistance. This research starts with microstructural and microchemical analyses of these intermetallic strengthened alumina-forming austenitic steels in a scanning electron microscope. The microchemistry of precipitates, as determined by energy-dispersive x-ray spectroscopy and transmission electron microscope, is also studied. Different thermo-mechanical treatments were carried out to these stainless steels in an attempt to further improve their mechanical properties. The microstructural and microchemical analyses were again performed after the thermo-mechanical processing. Synchrotron X-ray diffraction was used to measure the lattice parameters of these steels after different thermo-mechanical treatments. Tensile tests at both room and elevated temperatures were performed to study mechanical behaviors of this novel alloy system; the deformation mechanisms were studied by strain rate jump tests at elevated temperatures. Failure analysis and post-mortem TEM analysis were performed to study the creep failure mechanisms of these alumina-forming austenitic steels after creep tests. Experiments were carried out to study the effects of boron and carbon additions in the aged alumina-forming austenitic steels.

  11. Kinetic studies of the sucrose adsorption onto an alumina interface

    Science.gov (United States)

    Singh, Kaman; Mohan, Sudhanshu

    2004-01-01

    An account is given of an experimental kinetic study of adsorption of analar reagent sucrose (ARS) onto an alumina interface spectrometrically ( λmax=570 nm) at pH 8.0 and at room temperature. The adsorption isotherm is a typical Langmuirian isotherm (S-type) and adsorption parameters have been deduced according to the Langmuir's model. The adsorption coefficient evaluated from the Langmuir's equation was found to be 2.52×10 2 l mol -1. Adsorption mechanism has been interpreted on the basis of metal-saccharide interaction as found in organometallic compounds and interaction due to negatively charged ends on the disaccharide molecules and positively charge groups on the surface on alumina which depends on the pH value. The effects of variation in experimental conditions of the adsorption system have also been investigated. The adsorption exhibited a typical response to the pH effect and on going towards the PZC the net charge decreases and any reaction making dependence on charge and maximum adsorption (amount) was found near the isoelectric point of alumina (pH 9.0). The presence of ions like Cl -, SO 42- and PO 43- affect the adsorbed amount quantitatively and it seems that these anions compete with sucrose for the positively charged surface sites. The addition of similar concentration of cations was found to reduce the adsorbed amount. The temperature was found to have an inverse effect on adsorption. The additions of catonic and anionic detergents influence both the adsorbed amount and the adsorption rate. The thermodynamics of the titled adsorption model indicates the spontaneous and exothermic nature. The negative value of entropy is an indication of probability of favorable and complex nature of the adsorption.

  12. Silicon carbide whisker-zirconia reinforced mullite and alumina ceramics

    Science.gov (United States)

    Becher, Paul F.; Tiegs, Terry N.

    1987-01-01

    The flexural strength and/or fracture toughness of SiC whisker-reinforced composites utilizing mullite or alumina as the matrix material for the composite are increased by the addition of zirconia in a monoclinic or tetragonal phase to the matrix. The zirconia addition also provides for a lower hot-pressing temperature and increases the flexural strength and/or fracture toughness of the SiC whisker-reinforced composites over SiC whisker-reinforced composites of the similar matrix materials reinforced with similar concentrations of SiC whiskers.

  13. Macroporous silica–alumina composites with mesoporous walls

    Indian Academy of Sciences (India)

    Gautam Gundiah

    2001-04-01

    Macroporous silica–alumina composites with mesopores have been prepared by employing polymethylmethacrylate beads as templates in the presence of the cationic surfactant, N-cetyl-N,N,N-trimethylammonium bromide. The Si/Al ratio in the composites has been varied between 4.5 and 48 and the occurrence of mesopores has been verified by X-ray diffraction. The surface areas of the samples vary between 676 and 1038 m2g–1, with the highest value in the sample with Si/Al = 48.

  14. Toughening and strengthening mechanism of zirconia-alumina multiphase ceramics

    Energy Technology Data Exchange (ETDEWEB)

    Yu, M.Q.; Fan, S.G. [Research Inst. of Synthetic Crystals, Beijing, BJ (China); Shen, Q.; Zhang, L.M. [Wuhan Univ. of Technology (China)

    2003-07-01

    In the present study, the effect of compositions on the mechanical properties of zirconia-alumina multiphase ceramics was studied. The results showed that with the variety of ZrO{sub 2} content, the change of bending strength and fracture toughness of the multiphase ceramics exhibited a saddle shape which could be divided into three zones: ZTA, ADZ, and Transition zone. The mechanism of toughening and strengthening in each zone was mainly analyzed, and it was found that stress-induced transformation toughening of ZrO{sub 2} and dispersion strengthening of Al{sub 2}O{sub 3} were the two main factors. (orig.)

  15. Optical properties of porous anodic alumina embedded Cu nanocomposite films

    Science.gov (United States)

    Liu, Huiyuan; Sun, Huiyuan; Liu, Lihu; Hou, Xue; Jia, Xiaoxuan

    2015-06-01

    Porous anodic alumina embedded Cu with iridescent colors were fabricated in copper sulfate electrolyte. The films display highly saturated colors after being synthesized by an ac electrodeposition method. Tunable color in the films is obtained by adjusting anodization time, and can be adjusted across the entire visible range. Theoretical results of the changes in the structural color according to the Bragg-Snell formula are consistent with the experimental results. The films could be used in many areas including decoration, display and multifunctional anti-counterfeiting applications.

  16. Development of technology and applications based on porous alumina nanostructures

    OpenAIRE

    Vojkuvka, Lukas

    2009-01-01

    La disertación ha sido organizada de la siguiente manera. En el primer capítulo se presenta el estado del arte, donde se exponen algunos conceptos básicos de las propiedades electroquimicaselectroquímicas del alumino, las fases del crecimiento de los poros y el proceso de auto-ordenación de los mismos. El segundo capítulo de la tesis esta relacionado con la preparación y caracterización morfológica de las muestras de alumina porosa. >En el capítulo 4 se desglosan los resultados obtenidos de l...

  17. Recovery of alumina and some heavy metals from sulfate liquor

    Directory of Open Access Journals (Sweden)

    M.N. El Hazek

    2016-05-01

    Full Text Available The gibbsite bearing shale occurrence in the Paleozoic sedimentary sequence of SW Sinai, Egypt, was found to be associated with several metal values. From sulfate liquor prepared by proper leaching, the recovery of these metal values has been studied. Alumina was first separated in the form of potash alum followed by Cu-selective extraction by hydroxyoxime LIX-973N solvent. Then U recovery using an anionic exchange resin Amberlite IRA-400 was achieved. For the associated heavy metal Zn, it was subsequently extracted using di-2-ethylhexyl phosphoric acid. The relevant factors affecting the extraction process were adequately studied.

  18. Alcohol dehydration: Mechanism of ether formation using an alumina catalyst

    Energy Technology Data Exchange (ETDEWEB)

    Shi, B.; Davis, B.H. [Univ. of Kentucky, Lexington, KY (United States)

    1995-12-01

    Ether formation during the dehydration of secondary alcohols, namely, 2-butanol, 3-pentanol, and 1-cyclopentylethanol, was investigated. Using the proper reaction conditions, the yield of di-2-butyl ether during the dehydration of 2-butanol on alumina can be as high as 40%. That ether is formed by adding an alcohol to the alkene is ruled out by the results from deuterium tracer studies. Results from experiments using S(+)- 2-butanol suggest that the formation of di-2-butyl ether occurs by a S{sub N}2-type mechanism. 33 refs., 5 figs., 3 tabs.

  19. Singlet exciton fission in polycrystalline pentacene: from photophysics toward devices.

    Science.gov (United States)

    Wilson, Mark W B; Rao, Akshay; Ehrler, Bruno; Friend, Richard H

    2013-06-18

    Singlet exciton fission is the process in conjugated organic molecules bywhich a photogenerated singlet exciton couples to a nearby chromophore in the ground state, creating a pair of triplet excitons. Researchers first reported this phenomenon in the 1960s, an event that sparked further studies in the following decade. These investigations used fluorescence spectroscopy to establish that exciton fission occurred in single crystals of several acenes. However, research interest has been recently rekindled by the possibility that singlet fission could be used as a carrier multiplication technique to enhance the efficiency of photovoltaic cells. The most successful architecture to-date involves sensitizing a red-absorbing photoactive layer with a blue-absorbing material that undergoes fission, thereby generating additional photocurrent from higher-energy photons. The quest for improved solar cells has spurred a drive to better understand the fission process, which has received timely aid from modern techniques for time-resolved spectroscopy, quantum chemistry, and small-molecule device fabrication. However, the consensus interpretation of the initial studies using ultrafast transient absorption spectroscopy was that exciton fission was suppressed in polycrystalline thin films of pentacene, a material that would be otherwise expected to be an ideal model system, as well as a viable candidate for fission-sensitized photovoltaic devices. In this Account, we review the results of our recent transient absorption and device-based studies of polycrystalline pentacene. We address the controversy surrounding the assignment of spectroscopic features in transient absorption data, and illustrate how a consistent interpretation is possible. This work underpins our conclusion that singlet fission in pentacene is extraordinarily rapid (∼80 fs) and is thus the dominant decay channel for the photoexcited singlet exciton. Further, we discuss our demonstration that triplet excitons

  20. Physical properties optimization of polycrystalline LiFeAs

    Science.gov (United States)

    Singh, Shiv J.; Gräfe, Uwe; Beck, Robert; Wolter, Anja U. B.; Grafe, Hans-Joachim; Hess, Christian; Wurmehl, Sabine; Büchner, Bernd

    2016-10-01

    We present a study of parameter optimization for synthesizing truly stoichiometric polycrystalline LiFeAs. Stoichiometric LiFeAs has been prepared in a very broad range of synthesis temperature (200-900 °C) under otherwise exactly the same conditions, and has been characterized by structural, magnetic, transport, nuclear quadrupole resonance (NQR), and specific heat measurements. Our study showed that the LiFeAs phase is formed at 200 °C with a large amount of impurity phases. The amount of these impurity phases reduces with increasing synthesis temperature and the clean LiFeAs phase is obtained at a synthesis temperature of 600 °C. Magnetic susceptibility and resistivity measurements confirmed that the superconducting properties such as the critical temperature Tc, and the upper critical field Hc2 do not depend on the synthesis temperature (≤ 700 °C), remaining at almost the same value of ∼19 K and ∼40 T, respectively. However, the width ΔTc of the transition and the NQR line width decrease with increasing the synthesis temperature and reached to minimum value for the synthesis temperature of 600 °C. Our careful analysis suggests that the best sample obtained at 600 °C is optimal concerning the low resistivity, high residual resistivity ratio (RRR), low ΔTc, high Tc and Hc2, and a small NQR line width with values which are comparable to that reported for LiFeAs single crystals. Specific heat measurements confirmed the bulk superconducting nature of the samples. The Hc2 value estimated from the specific heat is consistent with that of the resistivity measurements. Concisely, 600 °C synthesis temperature yields optimal high quality polycrystalline LiFeAs bulk samples. Further improvement of the quality of the sample prepared at 600 °C could be obtained by a controlled slow cooling process. Microstructural analysis reveals that the abundance of micro-cracks becomes strongly reduced by the slow cooling process, resulting in an increase in clean and

  1. Modification of alumina matrices through chemical etching and electroless deposition of nano-Au array for amperometric sensing

    Directory of Open Access Journals (Sweden)

    Valinčius Gintaras

    2007-01-01

    Full Text Available AbstractSimple nanoporous alumina matrix modification procedure, in which the electrically highly insulating alumina barrier layer at the bottom of the pores is replaced with the conductive layer of the gold beds, was described. This modification makes possible the direct electron exchange between the underlying aluminum support and the redox species encapsulated in the alumina pores, thus, providing the generic platform for the nanoporous alumina sensors (biosensors with the direct amperometric signal readout fabrication.

  2. Development of a PDMS-grafted alumina membrane and its evaluation as solvent resistant nanofiltration membrane

    NARCIS (Netherlands)

    Pinheiro de Melo, A.F.; Hoogendoorn, D.; Nijmeijer, A.; Winnubst, A.J.A.

    2014-01-01

    A new solvent resistant nanofiltration (SRNF) membrane is developed by grafting a PDMS polymer into the pores of a 5 nm γ-alumina ceramic membrane. These PDMS-grafted γ-alumina membranes were attained through a two-step synthesis. The linking agent, 3-aminopropyltriethoxysilane (APTES), was first ap

  3. STUDY OF CATALYTIC CYCLISATION OF (+-CITRONELLAL WITH Zn/γ-ALUMINA AS CATALYST

    Directory of Open Access Journals (Sweden)

    Elvina Dhiaul Iftitah

    2010-06-01

    Full Text Available The reaction of catalytic cyclisation of (+-citronellal has been done using g-alumina and Zn/γ-alumina as catalysts. Zn/γ-alumina catalyst was prepared by impregnation of ZnBr2 into solid of γ-alumina in methanol as a solvent. The calcination process is performed on Muchalal reactor at 400 oC. The reactions were carried out under nitrogen gas atmosphere by mixing 5 mL sample and 1.0 g catalyst at 90-95 oC for 3 hours. The product of reaction was analyzed using GC, FT-IR and GC-MS. The reaction of cyclization of (+-citronellal with γ-alumina catalyst did not give targeted product as well as reaction with Zn/g-alumina catalyst. Whereas, the reactions with Zn/γ-alumina catalyst gave four compounds of isopulegol stereoisomer. Conversion of (--Isopulegol, (+-Neoisopulegol, (+-Isoisopulegol and (+-Neoisoisopulegol  were 64,29%, 18,80%, 9,20% and 3,32% respectively. For that reason, the transformation of (+-sitronelal using Zn/γ-alumina was considered to be the best catalyst. A reaction mechanism is proposed where the (+-citronellal molecule binds to a catalyst Lewis acid site via the aldehyde oxygen and the π-electrons of the double bond. Subsequent protonation of the aldehyde via a neighbouring Bronsted acid site initiates the cyclisation to isopulegol.   Keywords: catalytic cyclisation, impregnation, (+-isopulegol

  4. A Review of Alumina Feeding and Dissolution Factors in Aluminum Reduction Cells

    Science.gov (United States)

    Lavoie, Pascal; Taylor, Mark P.; Metson, James B.

    2016-08-01

    Modern aluminum reduction cells use point feeding technology to replenish alumina as it is consumed by the electrolytic process. The dissolution of alumina has become increasingly difficult to control as the cell sizes and electrolysis intensity have increased. The mass of alumina added per unit time is now much higher than a decade ago, and must take place within a smaller electrolyte mixing volume. In order to replenish the alumina concentration evenly, the alumina needs to be delivered, dispersed, dissolved, and distributed throughout the reduction cell. The dissolution itself follows a 4-step process that can be limited by a multitude of factors. The status of the research on each of these factors is reviewed in the present paper. Although research in laboratory cells has been conducted many times, and the impact of many factors on dissolution has been measured, published observations of alumina feeding on industrial cells are very sparse, especially regarding the dissolution dynamics in the space-time domain and the impact of the feeder hole condition. The present paper therefore presents a qualitative model of the factors governing alumina dissolution in industrial cells and offers the hypothesis that maintenance of the feeder hole condition is central to ensuring alumina dissolution and prevention of sludging.

  5. Morphology and thermal properties of compatibilized PA12/PP blends with boehmite alumina nanofiller inclusions

    CSIR Research Space (South Africa)

    Ogunniran, ES

    2011-12-01

    Full Text Available -1 Morphology and Thermal Properties of Compatibilized PA12/PP Blends with Boehmite Alumina Nanofiller Inclusions 1. Elijah Soba Ogunniran1, 2. Rotimi Sadiku1, 3. Suprakas Sinha Ray2,*, 4. Nyambeni Luruli3 Keywords: ? boehmite alumina; ? morphology...

  6. Polyethyleneglycol grafting of γ-alumina membranes for solvent resistant nanofiltration

    NARCIS (Netherlands)

    Tanardi, C.R.; Catana, Romina; Barboiu, Mihai; Ayral, André; Vankelecom, I.F.J.; Nijmeijer, A.; Winnubst, A.J.A.

    2016-01-01

    A method is presented for grafting mesoporous g-alumina (pore size 5 nm), supported on an a-alumina ceramic membrane, with polyethylene glycols (PEG). The grafting performance of g-Al2O3 powders with various PEG grafting agents, having different molecular weights, alkoxy groups, and ureido functiona

  7. Ge Honglin: Expand and Consolidate Chemical Alumina to Create World Top-class Brand

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    On June 9,Chinalco convened discussion meeting on integrated utilization of chemical alumina and red mud.Ge Honglin,Chairman and Secretary of the Party Leadership Group of Chinalco,emphasized:"It is imperative to unswervingly expand and consolidate chemical alumina,create world top-class brand,continually propel red mud integrated utilization,and improve integrated utilization rate of resources."

  8. Effect of Calcination on the Sintering of Gel-Derived, Zirconia-Toughened Alumina

    NARCIS (Netherlands)

    Exter, den Peter; Winnubst, Louis; Leuwerink, Theo H.P.; Burggraaf, Anthonie J.

    1994-01-01

    The densification behavior of ZrO2 (+ 3 mol% Y2O3)/85 wt% Al2O3 powder compacts, prepared by the hydrolysis of metal chlorides, can be characterized by a transition- and an α-alumina densification stage. The sintering behavior is strongly determined by the densification of the transition alumina agg

  9. Effect of Microstructure of Composite Powders on Microstructure and Properties of Microwave Sintered Alumina Matrix Ceramics

    Institute of Scientific and Technical Information of China (English)

    Hanmin Bian; Yong Yang; You Wang; Wei Tian; Haifu Jiang; Zhijuan Hu; Weimin Yu

    2013-01-01

    Two kinds of different structured alumina-titania composite powders were used to prepare alumina matrix ceramics by microwave sintering.One was powder mixture of alumina and titania at a micron-submicron level,in which fused-and-crushed alumina particles (micrometers) was clad with submicron-sized titania.The other was powder mixture of alumina and titania at nanometer-nanometer level,in which nano-sized alumina and nano-sized titania particles were homogeneously mixed by ball-milling and spray dried to prepare spherical alumina-titania composite powders.The effect of the microstructure of composite powders on microstructure and properties of microwave sintered alumina matrix ceramics were investigated.Nano-sized composite (NC) powder showed enhanced sintering behavior compared with micro-sized composite (MC) powders.The asprepared NC ceramic had much denser,finer and more homogenous microstructure than MC ceramic.The mechanical properties of NC ceramic were significantly higher than that of MC ceramic,e.g.the flexural strength,Vickers hardness and fracture toughness of NC ceramic were 85.3%,130.3% and 25.7% higher than that of MC ceramic,respectively.The improved mechanical properties of NC ceramic compared with that of MC ceramic were attributed to the enhanced densification and the finer and more homogeneous microstruc.ture through the use of the nanostructured composite powders.

  10. Nanostructural characterization of large-scale porous alumina fabricated via anodizing in arsenic acid solution

    Science.gov (United States)

    Akiya, Shunta; Kikuchi, Tatsuya; Natsui, Shungo; Suzuki, Ryosuke O.

    2017-05-01

    Anodizing of aluminum in an arsenic acid solution is reported for the fabrication of anodic porous alumina. The highest potential difference (voltage) without oxide burning increased as the temperature and the concentration of the arsenic acid solution decreased, and a high anodizing potential difference of 340 V was achieved. An ordered porous alumina with several tens of cells was formed in 0.1-0.5 M arsenic acid solutions at 310-340 V for 20 h. However, the regularity of the porous alumina was not improved via anodizing for 72 h. No pore sealing behavior of the porous alumina was observed upon immersion in boiling distilled water, and it may be due to the formation of an insoluble complex on the oxide surface. The porous alumina consisted of two different layers: a hexagonal alumina layer that contained arsenic from the electrolyte and a pure alumina honeycomb skeleton. The porous alumina exhibited a white photoluminescence emission at approximately 515 nm under UV irradiation at 254 nm.

  11. Crystallography-Induced Correlations in Pore Ordering of Anodic Alumina Films

    NARCIS (Netherlands)

    Roslyakov, Ilya V.; Koshkodaev, Dmitry S.; Eliseev, Andrei A.; Hermida-Merino, Daniel; Petukhov, Andrei V.; Napolskii, Kirill S.

    2016-01-01

    A crystallographic approach to tailoring the morphology and ordering degree of the porous structure of alumina films obtained by anodization of single-crystalline aluminum is discussed. The examination of porous structure of anodic alumina films formed on low-index and vicinal planes of Al single cr

  12. Synthesis and characterization of alumina application in support of zeolite membrane; Sintese e caracterizacao de alumina para aplicacao com o suporte de membrana zeolitica

    Energy Technology Data Exchange (ETDEWEB)

    Barbosa, A.S.; Rodrigues, M.G.F., E-mail: antoniellybarbosa@yahoo.com.br [Universidade Federal de Campina Grande (UFCG), PB (Brazil). Unidade Academica de Engenharia Quimica

    2012-07-01

    Much interest has been aroused in process applications using zeolite membrane. The physicochemical properties of the support have a strong effect on the quality of zeolite membrane. This work is to synthesize and characterize alumina for use as a support for zeolite membrane. In this work was synthesized α-alumina: 40% alumina, 0.2% for PABA, 0.5% oleic acid and 59.3% ethyl alcohol. The mixture was ground in ball mill and placed in an oven for 24 hours at 60 °C, allowed to stand for 24h. The pressing was performed with 4 tons. The pressed material was subjected to sintering at 1400 °C/hour. The samples were characterized by EDX, XRD and SEM. The results for the media by XRD showed that they are crystalline and pure. By EDX was observed that the supports consist essentially of alumina. (author)

  13. Synthesis of alumina-α using chemical and activation energy por microwave; Sintese de alumina-α utilizando ativacao quimica e energia por microondas

    Energy Technology Data Exchange (ETDEWEB)

    Cartaxo, J.M.; Galdino, M.N.; Neves, G.A., E-mail: juliana@dema.ufcg.edu.br [Universidade Federal de Campina Grande (DEMA/UFCG), PB (Brazil). Unidade Academica de Engenharia de Materiais; Campos, L.F.A.; Menezes, R.R. [Universidade Federal da Paraiba (UFPB), PB (Brazil). Dept. de Engenharia de Materiais; Kiminami, R.H.G.A. [Universidade Federal de Sao Carlos (UFSC), SP (Brazil)

    2012-07-01

    With the great technological advances of alumina, this study aimed to synthesize the α-alumina and chemical activation using microwave energy from aluminum nitrate precursor. The synthesized powders were characterized by X-ray diffraction, thermal analysis (DTA and TGA) and surface area by BET. The chemical activation process was conducted by varying the concentration of the acid solution and exposure time of the material solution. The results proved the effectiveness of chemical activation by accelerating the synthesis process. The results of thermal analysis can observe the thermal decomposition temperature and the possible nucleation of new phases of alumina. The results of X-ray diffraction showed that the powders have the structure of α-alumina with specific areas ranging from 3 to 15m{sup 2}/g pore diameters between 190 to 485nm. (author)

  14. Microstructure-mechanical behaviour relationship in alumina-calcium exaluminate composites; Relaciones microestructura-comportamiento mecanico en materiales de alumina-hexaluminato calcico

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez-Herencia, A. J.; Moreno, R.; Baudin, C.

    2001-07-01

    The grain growth behaviour of dense alumina materials has been modified by the addition of calcium hexaluminate particles. Maximum dispersion has been obtained by colloidal processing routes. The influence of sintering temperature (1500-1600 degree centigree) on the size and shape of the alumina grains has been established. The mechanical behaviour of three composite materials with the same composition ({approx}10 vol% CA{sub 6}) and large microstructural differences has been studied in comparison with that of monophasic alumina of the same grain size. The influence of grain size and shape on toughness has been established. R-curve behaviour has been detected during fracture of the material with the alumina grains presenting the largest shape factor. (Author) 18 refs.

  15. Interactions of L-alanine with alumina as studied by vibrational spectroscopy.

    Science.gov (United States)

    Garcia, Ana R; de Barros, Ricardo Brito; Fidalgo, Alexandra; Ilharco, Laura M

    2007-09-25

    The interactions of L-alanine with gamma- and alpha-alumina have been investigated by diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). L-alanine/alumina samples were dried from aqueous suspensions, at 36.5 degrees C, with two amino acid concentrations (0.4 and 0.8 mmol g-1) and at different pH values (1, 6, and 13). The vibrational spectra proved that the nature of L-alanine interactions with both aluminas is the same (hydrogen bonding), although the groups involved depend on the L-alanine form and on alumina surface groups, both controlled by the pH. For samples prepared at pH 1, cationic L-alanine [CH3CH(NH3+)COOH] displaces physisorbed water from alumina, and strong hydrogen bonds are established between the carbonyl groups of alanine, as electron donors, and the surface Al-OH2+ groups of alumina. This occurs at the expense of alanine dimer dissociation and breaking of intramolecular bonds. When samples are prepared at pH 6, the interacting groups are Al-OH2+ and the carboxylate groups of zwitterionic L-alanine [CH3CH(NH3+)COO-]. The affinity of L-alanine toward alumina decreases, as the strong NH3+...-OOC intermolecular hydrogen bonds prevail over the interactions with alumina. Thus, for a load of 0.8 mmol g-1, phase segregation is observed. On alpha-alumina, crystal deposition is even observed for a load of 0.4 mmol g-1. At pH 13, the carboxylate groups of anionic L-alanine [CH3CH(NH2)COO-] are not affected by alumina. Instead, hydrogen bond interactions occur between NH2 and the Al-OH surface groups of the substrate. Complementary N2 adsorption-desorption isotherms showed that adsorption of L-alanine occurs onto the alumina pore network for samples prepared at pH 1 and 13, whereas at pH 6 the amino acid/alumina interactions are not strong enough to promote adsorption. The mesoporous structure and the high specific surface area of gamma-alumina make it a more efficient substrate for adsorption of L-alanine. For each alumina, however, it is

  16. Evidence for electromagnetic granularity in polycrystalline Sm1111 iron-pnictides with enhanced phase purity

    Energy Technology Data Exchange (ETDEWEB)

    Yamamoto, A [Department of Applied Chemistry, University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656 (Japan); Jiang, J; Kametani, F; Polyanskii, A; Hellstrom, E; Larbalestier, D [Applied Superconductivity Center, National High Magnetic Field Laboratory, 2031 E. Paul Dirac, Dr., Tallahassee, FL 32310 (United States); Martinelli, A; Palenzona, A; Tropeano, M; Putti, M, E-mail: yamamoto@appchem.t.u-tokyo.ac.jp, E-mail: putti@fisica.unige.it [University of Genova and CNR-SPIN, Via Dodecaneso, 33-I16146 Genova (Italy)

    2011-04-15

    We prepared polycrystalline SmFeAsO{sub 1-x}F{sub x} (Sm1111) bulk samples by sintering and hot isostatic pressing (HIP) in order to study the effects of phase purity and relative density on the intergranular current density. Sintered and HIP processed Sm1111 samples are denser with fewer impurity phases, such as SmOF and the grain boundary wetting phase, FeAs. We found quite complex magnetization behavior due to variations of both the inter and intragranular current densities. Removing porosity and reducing second phase content enhanced the intergranular current density, but HIP processing reduced the intragranular current density, arising from the loss of fluorine and reduction of T{sub c}. We believe that the HIP processed samples are amongst the purest polycrystalline 1111 samples yet made. However, their intergranular current densities are still small, providing further evidence that polycrystalline pnictides, like polycrystalline cuprates, are affected by weak-link problems.

  17. Synthesis and nonlinear optical property of polycrystalline MnTeMoO{sub 6}

    Energy Technology Data Exchange (ETDEWEB)

    Jin, Chengguo [Yibin University, Key Laboratory of Computational Physics of Sichuan Province, Yibin (China); Yibin University, School of Physics and Electronic Engineering, Yibin (China)

    2017-04-15

    Polycrystalline MnTeMoO{sub 6} powder has been synthesized by a new approach that MnO{sub 2} is used as the manganese source. The transformation mechanism of manganese ions in the new approach has been discussed. The nonlinear optical property of polycrystalline MnTeMoO{sub 6} has been investigated, and compared with single-crystalline samples. The transformation Mn{sup 4+} → Mn{sup 2+} may be formed directly without stable intermediates, and TeO{sub 2} may serve as catalyst. The SHG response of polycrystalline MnTeMoO{sub 6} powder is worse than that of single-crystalline powder in the same particle size distribution as its pseudo-size. The results indicate that it should pay special attention with the pseudo-size of polycrystalline powder when the potential nonlinear optical materials are screened by powder second harmonic generation measurements. (orig.)

  18. Synthesis and nonlinear optical property of polycrystalline MnTeMoO6

    Science.gov (United States)

    Jin, Chengguo

    2017-04-01

    Polycrystalline MnTeMoO6 powder has been synthesized by a new approach that MnO2 is used as the manganese source. The transformation mechanism of manganese ions in the new approach has been discussed. The nonlinear optical property of polycrystalline MnTeMoO6 has been investigated, and compared with single-crystalline samples. The transformation Mn4+ → Mn2+ may be formed directly without stable intermediates, and TeO2 may serve as catalyst. The SHG response of polycrystalline MnTeMoO6 powder is worse than that of single-crystalline powder in the same particle size distribution as its pseudo-size. The results indicate that it should pay special attention with the pseudo-size of polycrystalline powder when the potential nonlinear optical materials are screened by powder second harmonic generation measurements.

  19. Study of polycrystalline silicon obtained by aluminum-induced crystallization depending on process conditions

    Science.gov (United States)

    Pereyaslavtsev, Alexander; Sokolov, Igor; Sinev, Leonid

    2016-11-01

    In this paper, we have decided to consider an alternative method of producing polycrystalline silicon and study change of its electrophysical characteristics depending on process parameters. As an alternative low-pressure chemical vapor deposition method appears aluminum-induced crystallization (AIC), which allows to obtain a polycrystalline silicon film is significantly larger grain size, thereby reducing contribution of grain boundaries. A comprehensive study of polycrystalline silicon was carried out using a variety of microscopic (OM, SEM) and spectroscopic (RAMAN, XPS) and diffraction (EBSD, XRD) analytic methods. We also considered possibility of self-doping in AIC, result of which was obtained polycrystalline silicon with different resistance. Additionally considered changes in temperature coefficient of resistance depending on technological parameters of AIC process.

  20. Cellulose extraction from Zoysia japonica pretreated by alumina-doped MgO in AMIMCl.

    Science.gov (United States)

    Liu, Le; Ju, Meiting; Li, Weizun; Jiang, Yang

    2014-11-26

    In this study, alumina-doped MgO was produced as a solid alkali for lignocellulose pretreatment. Pretreatment with alumina-doped MgO disrupted the lignocellulose structure and significantly reduced the lignin content of the Z. japonica. After pretreatment, Z. japonica showed significant solubility in 1-allyl-3-methylimidazolium chloride (AMIMCl). The similar high solubility of pretreated Z. japonica samples by original alumina-doped MgO and used alumina-doped MgO also proved that alumina-doped MgO had strong stability, which can be recycled and used repeatedly. The regenerated cellulose was similar to microcrystalline cellulose according to FTIR and NMR analyses. Compared to microcrystalline cellulose, only the crystallinity of the regenerated cellulose decreased.

  1. Investigation of Mechanical Behavior of Alfa and Gamma Nano- Alumina/ Epoxy Composite Made By Vartm

    Directory of Open Access Journals (Sweden)

    P. Ghabezi

    2016-06-01

    Full Text Available In this paper, the mechanical properties (flexural and tensional modulus and strength are investigated by manufacturing Epoxy/Glass Nano-composite samples with different Nano-particle wt% (Nano-Alumina to find optimum conditions. The alpha and Gamma grade of Nano alumina were added to the epoxy system with the weight percentage of 1, 2, 3, 4, 5 and 6. The experimental results show that the maximum flexural stiffness in Alfa and Gamma Nano-alumina composite is related to 6 wt% and 4 wt% samples, respectively. And the highest tensional stiffness in Alfa and Gamma Nano-alumina composite is related to 4 wt% and 5 wt% samples, respectively. Also the highest toughness for Alfa and Gamma Nano-composites is observed for 4 wt% and 3 wt% samples and in the same way Nano-alumina in grade Alfa with 1 wt% and Gamma with 3 wt% have highest failure strain.

  2. Processing, nano indentation and scratch testing of alumina-coated YTZP

    Energy Technology Data Exchange (ETDEWEB)

    Valle, J.; Anglada, M.; Ferrari, B.; Baudin, C.

    2015-10-01

    In this work, alumina-coated YTZP materials are proposed as means to combine the mechanical reliability of YTZP with the stiffness and hardness of alumina. Additionally, compressive stresses are developed in the alumina coating when cooling from the sintering temperature due to the thermal expansion mismatch between alumina and YTZP. The proposed processing method involves dipping of pre-sintered YTZP specimens in stable alumina suspensions and co-sintering of the dipped specimens. The influence of the processing parameters on the macro and microstructure of the materials has been established. Berkovich indentation has been performed to determine the Young's modulus of the substrates and coatings. The structural integrity of the coatings has been analysed using scratch tests. The Young's modulus. The optimised specimens present high resistance to scratch up to loads of 150 N. (Author)

  3. Robust Mechanical Properties of Electrically Insulative Alumina Films by Supersonic Aerosol Deposition

    Science.gov (United States)

    Lee, Jong-Gun; Cha, You-Hong; Kim, Do-Yeon; Lee, Jong-Hyuk; Lee, Tae-Kyu; Kim, Woo-Young; Park, Jieun; Lee, Dongyun; James, Scott C.; Al-Deyab, Salem S.; Yoon, Sam S.

    2015-08-01

    Electrically insulating alumina films were fabricated on steel substrates using supersonic aerosol deposition and their hardness and scratchability were measured. Alumina particles (0.4-μm diameter) were supersonically sprayed inside a low-pressure chamber using between 1 and 20 nozzle passes. These alumina particles were annealed between 300 and 800 K to determine the temperature's effect on film crystal size (37-41 nm). Smoother surface morphology and increased electrical resistance of the thin films were observed as their thicknesses grew by increasing the number of passes. Resistances of up to 10,000 MΩ demonstrate robust electrical insulation. Significant hardness was measured (1232 hv or 13.33 GPa), but the alumina films could be peeled off with normal loads of 36 and 47 N for films deposited on stainless steel and SKD11 substrates, respectively. High insulation and hardness confirm that these alumina films would make excellent electrical insulators.

  4. Mechanical performance of alumina reinforced with NbC, TiC and WC

    Directory of Open Access Journals (Sweden)

    Wilson Acchar

    2012-12-01

    Full Text Available The incorporation of refractory hard particles in Al2O3-based composites may inhibit grain growth of the matrix, which could significantly contribute to mechanical performance of the composite. The present study aimed to investigate the potential use of NbC as alumina reinforcing material, as an alternative to other carbides such as TiC and WC. Alumina was mixed with a fixed carbide concentration of 30 wt.(% in a ball mill and uniaxially hot-pressed at 1650 ºC under a load of 30 MPa in an inert atmosphere. X-ray diffraction revealed no oxidation products were present after the sintering process. Microstructure analyses indicate a homogeneous carbide distribution in the alumina matrix. Results obtained in this study show that alumina reinforced with NbC is a composite material with properties comparable to those of alumina reinforced with WC and TiC, thereby making it good reinforcing material.

  5. Micromechanics of deformation in porous liquid phase sintered alumina under hertzian contact

    Energy Technology Data Exchange (ETDEWEB)

    DIGIOVANNI,ANTHONY A.; CHAN,HELEN M.; HARMER,MARTIN P.; NIED,HERMAN F.

    2000-05-15

    A series of fine-grained porous alumina samples, with and without a liquid phase, were fabricated in compositions matched closely to commercially available alumina used as a microelectronic substrates. Hertzian indentation on monolithic specimens of the glass-containing samples produced a greater quasi-ductile stress-strain response compared to that observed in the pure alumina. Maximum residual indentation depths, determined from surface profilometry, correlated with the stress-strain results. Moreover, microstructural observations from bonded interface specimens revealed significantly more damage in the form of microcracking and under extreme loading, pore collapse, in the glass-containing specimens. The absence of the typical twin faulting mechanism observed for larger-grained alumina suggests that the damage mechanism for quasi-ductility in these fine-grained porous alumina derived from the pores acting as a stress concentrator and the grain boundary glass phase providing a weak path for short crack propagation.

  6. Bond strength of a resin cement to high-alumina and zirconia-reinforced ceramics : The effect of surface conditioning

    NARCIS (Netherlands)

    Felipe Valandro, Luiz; Ozcan, Mutlu; Bottino, Marco Cicero; Bottino, Marco Antonio; Scotti, Roberto; Della Bona, Alvaro

    2006-01-01

    Purpose: The aim of this study was to evaluate the effect of two surface conditioning methods on the microtensile bond strength of a resin cement to three high-strength core ceramics: high alumina-based (In-Ceram Alumina, Procera AllCeram) and zirconia-reinforced alumina-based (in-Ceram Zirconia) ce

  7. Bond strength of a resin cement to high-alumina and zirconia-reinforced ceramics: The effect of surface conditioning

    NARCIS (Netherlands)

    Valandro, L.F.; Ozcan, M.; Bottino, M.C.; Bottino, M.A.; Scotti, R.; Della Bona, A.

    2006-01-01

    Purpose: The aim of this study was to evaluate the effect of two surface conditioning methods on the microtensile bond strength of a resin cement to three high-strength core ceramics: high alumina-based (In-Ceram Alumina, Procera AllCeram) and zirconia-reinforced alumina-based (in-Ceram Zirconia) ce

  8. Bond strength of a resin cement to high-alumina and zirconia-reinforced ceramics: The effect of surface conditioning

    NARCIS (Netherlands)

    Valandro, L.F.; Ozcan, M.; Bottino, M.C.; Bottino, M.A.; Scotti, R.; Della Bona, A.

    2006-01-01

    Purpose: The aim of this study was to evaluate the effect of two surface conditioning methods on the microtensile bond strength of a resin cement to three high-strength core ceramics: high alumina-based (In-Ceram Alumina, Procera AllCeram) and zirconia-reinforced alumina-based (in-Ceram Zirconia)

  9. Dislocation Structures in Creep-deformed Polycrystalline MgO

    DEFF Research Database (Denmark)

    Bilde-Sørensen, Jørgen

    1972-01-01

    energy of 76 ± 12 kcal/mol. The creep rate is independent of grain size. The dislocation structure was investigated by transmission electron microscopy. The total dislocation density follows the relation, σ=bG√ρ, commonly found for metals. The dislocations form a 3-dimensional network in which many......Secondary creep of polycrystalline MgO with grain sizes of 100 and 190 μm was investigated at 1300° to 1460°C under compressive loads of 2.5 to 5.5 kgf/mm2. The dependence of creep rate on load follows a power law with an exponent of 3.2±0.3. The process is thermally activated, with an activation...... dislocation segments lie in their slip or climb planes. On the basis of this structure, a model is proposed in which glide is the principal cause of deformation but the rate-limiting process, i.e. annealing of the network, is diffusion-controlled. Theoretical estimates and experimental results agree within 1...

  10. Platinum-induced structural collapse in layered oxide polycrystalline films

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Jianlin; Liu, Changhui [CAS Key Laboratory of Materials for Energy Conversion, Department of Materials Science and Engineering, University of Science and Technology of China, Hefei 230026 (China); Huang, Haoliang [CAS Key Laboratory of Materials for Energy Conversion, Department of Materials Science and Engineering, University of Science and Technology of China, Hefei 230026 (China); Synergetic Innovation Center of Quantum Information and Quantum Physics, University of Science and Technology of China, Hefei 230026 (China); Fu, Zhengping; Peng, Ranran, E-mail: pengrr@ustc.edu.cn, E-mail: yllu@ustc.edu.cn [CAS Key Laboratory of Materials for Energy Conversion, Department of Materials Science and Engineering, University of Science and Technology of China, Hefei 230026 (China); Synergetic Innovation Center of Quantum Information and Quantum Physics, University of Science and Technology of China, Hefei 230026 (China); Hefei National Laboratory for Physical Sciences at the Microscale, University of Science and Technology of China, Hefei 230026 (China); Zhai, Xiaofang [Synergetic Innovation Center of Quantum Information and Quantum Physics, University of Science and Technology of China, Hefei 230026 (China); Hefei National Laboratory for Physical Sciences at the Microscale, University of Science and Technology of China, Hefei 230026 (China); Lu, Yalin, E-mail: pengrr@ustc.edu.cn, E-mail: yllu@ustc.edu.cn [CAS Key Laboratory of Materials for Energy Conversion, Department of Materials Science and Engineering, University of Science and Technology of China, Hefei 230026 (China); Synergetic Innovation Center of Quantum Information and Quantum Physics, University of Science and Technology of China, Hefei 230026 (China); Hefei National Laboratory for Physical Sciences at the Microscale, University of Science and Technology of China, Hefei 230026 (China); Laser and Optics Research Center, Department of Physics, United States Air Force Academy, Colorado 80840 (United States)

    2015-03-30

    Effect of a platinum bottom electrode on the SrBi{sub 5}Fe{sub 1−x}Co{sub x}Ti{sub 4}O{sub 18} layered oxide polycrystalline films was systematically studied. The doped cobalt ions react with the platinum to form a secondary phase of PtCoO{sub 2}, which has a typical Delafossite structure with a weak antiferromagnetism and an exceptionally high in-plane electrical conductivity. Formation of PtCoO{sub 2} at the interface partially consumes the cobalt dopant and leads to the structural collapsing from 5 to 4 layers, which was confirmed by X-ray diffraction and high resolution transmission electron microscopy measurements. Considering the weak magnetic contribution from PtCoO{sub 2}, the observed ferromagnetism should be intrinsic of the Aurivillius compounds. Ferroelectric properties were also indicated by the piezoresponse force microscopy. In this work, the platinum induced secondary phase at the interface was observed, which has a strong impact on Aurivillius structural configuration and thus the ferromagnetic and ferroelectric properties.

  11. HighP–TNano-Mechanics of Polycrystalline Nickel

    Directory of Open Access Journals (Sweden)

    Shen TD

    2007-01-01

    Full Text Available AbstractWe have conducted highP–Tsynchrotron X-ray and time-of-flight neutron diffraction experiments as well as indentation measurements to study equation of state, constitutive properties, and hardness of nanocrystalline and bulk nickel. Our lattice volume–pressure data present a clear evidence of elastic softening in nanocrystalline Ni as compared with the bulk nickel. We show that the enhanced overall compressibility of nanocrystalline Ni is a consequence of the higher compressibility of the surface shell of Ni nanocrystals, which supports the results of molecular dynamics simulation and a generalized model of a nanocrystal with expanded surface layer. The analytical methods we developed based on the peak-profile of diffraction data allow us to identify “micro/local” yield due to high stress concentration at the grain-to-grain contacts and “macro/bulk” yield due to deviatoric stress over the entire sample. The graphic approach of our strain/stress analyses can also reveal the corresponding yield strength, grain crushing/growth, work hardening/softening, and thermal relaxation under highP–Tconditions, as well as the intrinsic residual/surface strains in the polycrystalline bulks. From micro-indentation measurements, we found that a low-temperature annealing (T < 0.4 Tm hardens nanocrystalline Ni, leading to an inverse Hall–Petch relationship. We explain this abnormal Hall–Petch effect in terms of impurity segregation to the grain boundaries of the nanocrystalline Ni.

  12. Polycrystalline-Diamond MEMS Biosensors Including Neural Microelectrode-Arrays

    Directory of Open Access Journals (Sweden)

    Donna H. Wang

    2011-08-01

    Full Text Available Diamond is a material of interest due to its unique combination of properties, including its chemical inertness and biocompatibility. Polycrystalline diamond (poly-C has been used in experimental biosensors that utilize electrochemical methods and antigen-antibody binding for the detection of biological molecules. Boron-doped poly-C electrodes have been found to be very advantageous for electrochemical applications due to their large potential window, low background current and noise, and low detection limits (as low as 500 fM. The biocompatibility of poly-C is found to be comparable, or superior to, other materials commonly used for implants, such as titanium and 316 stainless steel. We have developed a diamond-based, neural microelectrode-array (MEA, due to the desirability of poly-C as a biosensor. These diamond probes have been used for in vivo electrical recording and in vitro electrochemical detection. Poly-C electrodes have been used for electrical recording of neural activity. In vitro studies indicate that the diamond probe can detect norepinephrine at a 5 nM level. We propose a combination of diamond micro-machining and surface functionalization for manufacturing diamond pathogen-microsensors.

  13. Polycrystalline-Diamond MEMS Biosensors Including Neural Microelectrode-Arrays.

    Science.gov (United States)

    Varney, Michael W; Aslam, Dean M; Janoudi, Abed; Chan, Ho-Yin; Wang, Donna H

    2011-08-15

    Diamond is a material of interest due to its unique combination of properties, including its chemical inertness and biocompatibility. Polycrystalline diamond (poly-C) has been used in experimental biosensors that utilize electrochemical methods and antigen-antibody binding for the detection of biological molecules. Boron-doped poly-C electrodes have been found to be very advantageous for electrochemical applications due to their large potential window, low background current and noise, and low detection limits (as low as 500 fM). The biocompatibility of poly-C is found to be comparable, or superior to, other materials commonly used for implants, such as titanium and 316 stainless steel. We have developed a diamond-based, neural microelectrode-array (MEA), due to the desirability of poly-C as a biosensor. These diamond probes have been used for in vivo electrical recording and in vitro electrochemical detection. Poly-C electrodes have been used for electrical recording of neural activity. In vitro studies indicate that the diamond probe can detect norepinephrine at a 5 nM level. We propose a combination of diamond micro-machining and surface functionalization for manufacturing diamond pathogen-microsensors.

  14. Creep behavior for advanced polycrystalline SiC fibers

    Energy Technology Data Exchange (ETDEWEB)

    Youngblood, G.E.; Jones, R.H. [Pacific Northwest National Lab., Richland, WA (United States); Kohyama, Akira [Kyoto Univ. (Japan)] [and others

    1997-08-01

    A bend stress relaxation (BSR) test is planned to examine irradiation enhanced creep in polycrystalline SiC fibers which are under development for use as fiber reinforcement in SiC/SiC composite. Baseline 1 hr and 100 hr BSR thermal creep {open_quotes}m{close_quotes} curves have been obtained for five selected advanced SiC fiber types and for standard Nicalon CG fiber. The transition temperature, that temperature where the S-shaped m-curve has a value 0.5, is a measure of fiber creep resistance. In order of decreasing thermal creep resistance, with the 100 hr BSR transition temperature given in parenthesis, the fibers ranked: Sylramic (1261{degrees}C), Nicalon S (1256{degrees}C), annealed Hi Nicalon (1215{degrees}C), Hi Nicalon (1078{degrees}C), Nicalon CG (1003{degrees}C) and Tyranno E (932{degrees}C). The thermal creep for Sylramic, Nicalon S, Hi Nicalon and Nicalon CG fibers in a 5000 hr irradiation creep BSR test is projected from the temperature dependence of the m-curves determined during 1 and 100 hr BSR control tests.

  15. Preparation and characterization of polycrystalline n-CdSe photoelectrode

    Energy Technology Data Exchange (ETDEWEB)

    Bandyopadhyay, T.K.

    1979-01-01

    Thin layers of polycrystalline p-CdSe were prepared by the simultaneous eletrodeposition of cadmium and selenium from cadmium sulfate and selenious acid in a sulfuric acid solution at pH 0-1 on a titanium substrate. The adherence of the layers to the substrate, stoichiometric ratio of Cd:Se and photovoltaic property of the film depend upon the molar ratio of CdSO/sub 4/ and H/sub 2/SeO/sub 3/ and current density as well as on the pH and temperature of the electrolysis bath. On increasing the current density or the ratio of CdSO/sub 4/:H/sub 2/SeO/sub 3/ in the electrolysis bath, the Cd:Se of the electrodeposit increased. The semiconductor films so prepared were annealed at 550/sup 0/C in a nitrogen atmosphere, followed by etching in an acid solution and then used to construct the photo-electrochemical cell, Ti/CdSe/Na/sub 2/S-Na/sub 2/S/sub x/(aq.)/Pt, and the current-voltage curves have been studied. 11 references.

  16. Light scattering from impurity enhanced liquid layers in polycrystalline ice

    Science.gov (United States)

    Thomson, E. S.; Wettlaufer, J. S.; Wilen, L. A.

    2009-12-01

    Impurity enhanced grain boundary premelting underlies a wide range of geophysical phenomena throughout the cryosphere. In particular, it is known that when water droplets freeze in the atmosphere they are highly polycrystalline and impurities are rejected into grain boundaries. The predicted character and sensitivity of grain boundaries to impurities close to the melting point precludes the use of standard techniques for imaging the interface. Unlike their larger more macroscopic relatives such as veins (3 grain intersections) and nodes (4 grain intersections), grain boundaries do not submit to optical microscopy. However, using an experimental light scattering method grain boundary changes can be measured as a function of thermodynamic variables. Accurate analysis of the light scattering data generated using this method requires a full theory of light propagation through the grain boundary layer straddled by ice crystals. Here we present a theory for light scattering from such a boundary, experimental data using NaCl as a dopant, and dicsuss atmospheric implications from the troposphere to the stratosphere.

  17. Local self-field measurements in Tl-2223 polycrystalline superconductors

    Energy Technology Data Exchange (ETDEWEB)

    Saenz, A. [Univ. de Costa Rica, San Jose (Costa Rica). Escuela de Fisica; Niculescu, H. [Florida Agricultural and Mechanical Univ., Tallahassee, FL (United States). Dept. of Physics; Gielisse, P.J. [Dept. of Mechanical Engineering, Florida State Univ., Tallahassee, FL (United States)

    2000-07-01

    We report local self-field measurements on superconducting (Tl-2223) disks in an applied field. The axial components of the self-field generated by polycrystalline superconductors, have been measured at points above the sample using a Hall probe. The measurements were conducted with a computer controlled precision x-y scanning assembly, at liquid nitrogen temperatures. Single point and two- dimensional distributions of the local self-field above the samples immersed in a homogeneous applied field up to 16 mT, were recorded. In an increasing/decreasing magnetic field the magnetic response of the superconductors traverses hysteresis loops due to inter- and intragranular flux pinning. The field for full flux penetration and the maximum shielded field have been identified from characteristic points on the hysteresis loops. Evaluation of the average intergrain current density j{sub c}, assuming a uniform critical current density, resulted in the value 2.7 x 10{sup 6} A/m{sup 2}. (orig.)

  18. Ultrafast dynamics of exciton fission in polycrystalline pentacene.

    Science.gov (United States)

    Wilson, Mark W B; Rao, Akshay; Clark, Jenny; Kumar, R Sai Santosh; Brida, Daniele; Cerullo, Giulio; Friend, Richard H

    2011-08-10

    We use ultrafast transient absorption spectroscopy with sub-20 fs time resolution and broad spectral coverage to directly probe the process of exciton fission in polycrystalline thin films of pentacene. We observe that the overwhelming majority of initially photogenerated singlet excitons evolve into triplet excitons on an ∼80 fs time scale independent of the excitation wavelength. This implies that exciton fission occurs at a rate comparable to phonon-mediated exciton localization processes and may proceed directly from the initial, delocalized, state. The singlet population is identified due to the brief presence of stimulated emission, which is emitted at wavelengths which vary with the photon energy of the excitation pulse, a violation of Kasha's Rule that confirms that the lowest-lying singlet state is extremely short-lived. This direct demonstration that triplet generation is both rapid and efficient establishes multiple exciton generation by exciton fission as an attractive route to increased efficiency in organic solar cells. © 2011 American Chemical Society

  19. Thermoelectric properties of polycrystalline NiSi3P4

    Science.gov (United States)

    May, Andrew F.; McGuire, Michael A.; Wang, Hsin

    2013-03-01

    The Hall and Seebeck coefficients, electrical resistivity, and thermal conductivity of polycrystalline NiSi3P4 were characterized from 2 to 775 K. Undoped NiSi3P4 behaves like a narrow gap semiconductor, with activated electrical resistivity ρ below room temperature and a large Seebeck coefficient of ˜400 μV/K at 300 K. Attempts to substitute boron for silicon resulted in the production of extrinsic holes, yielding moderately doped semiconductor behavior with ρ increasing with increasing temperature above ˜150 K. Hall carrier densities are limited to approximately 5 × 1019 cm-3 at 200 K, which would suggest the solubility limit of boron is reached if boron is indeed incorporated into the lattice. These extrinsic samples have a Hall mobility of ˜12 cm2/V/s at 300 K, and a parabolic band equivalent effective mass of ˜3.5 times the free electron mass. At 700 K, the thermoelectric figure of merit zT reaches ˜0.1. Further improvements in thermoelectric performance would require reaching higher carrier densities, as well as a mechanism to further reduce the lattice thermal conductivity, which is ˜5 W/m/K at 700 K. Alloying in Ge results in a slight reduction of the thermal conductivity at low temperatures, with little influence observed at higher temperatures.

  20. Distributions of methyl group rotational barriers in polycrystalline organic solids

    Energy Technology Data Exchange (ETDEWEB)

    Beckmann, Peter A., E-mail: pbeckman@brynmawr.edu, E-mail: wangxianlong@uestc.edu.cn [Department of Physics, Bryn Mawr College, 101 North Merion Ave., Bryn Mawr, Pennsylvania 19010-2899 (United States); Conn, Kathleen G. [Department of Physics, Bryn Mawr College, 101 North Merion Ave., Bryn Mawr, Pennsylvania 19010-2899 (United States); Division of Education and Human Services, Neumann University, One Neumann Drive, Aston, Pennsylvania 19014-1298 (United States); Mallory, Clelia W. [Department of Chemistry, University of Pennsylvania, Philadelphia, Pennsylvania 19104-6323 (United States); Department of Chemistry, Bryn Mawr College, 101 North Merion Ave., Bryn Mawr, Pennsylvania 19010-2899 (United States); Mallory, Frank B. [Department of Chemistry, Bryn Mawr College, 101 North Merion Ave., Bryn Mawr, Pennsylvania 19010-2899 (United States); Rheingold, Arnold L. [Department of Chemistry and Biochemistry, University of California, San Diego, 9500 Gilman Dr., La Jolla, California 92093-0358 (United States); Rotkina, Lolita [Regional Nanotechnology Facility, Laboratory for Research on the Structure of Matter, University of Pennsylvania, 3231 Walnut Street, Philadelphia, Pennsylvania 19104-6202 (United States); Wang, Xianlong, E-mail: pbeckman@brynmawr.edu, E-mail: wangxianlong@uestc.edu.cn [Key Laboratory for NeuroInformation of Ministry of Education, School of Life Science and Technology, University of Electronic Science and Technology, 4 North Jianshe Rd., 2nd Section, Chengdu 610054 (China)

    2013-11-28

    We bring together solid state {sup 1}H spin-lattice relaxation rate measurements, scanning electron microscopy, single crystal X-ray diffraction, and electronic structure calculations for two methyl substituted organic compounds to investigate methyl group (CH{sub 3}) rotational dynamics in the solid state. Methyl group rotational barrier heights are computed using electronic structure calculations, both in isolated molecules and in molecular clusters mimicking a perfect single crystal environment. The calculations are performed on suitable clusters built from the X-ray diffraction studies. These calculations allow for an estimate of the intramolecular and the intermolecular contributions to the barrier heights. The {sup 1}H relaxation measurements, on the other hand, are performed with polycrystalline samples which have been investigated with scanning electron microscopy. The {sup 1}H relaxation measurements are best fitted with a distribution of activation energies for methyl group rotation and we propose, based on the scanning electron microscopy images, that this distribution arises from molecules near crystallite surfaces or near other crystal imperfections (vacancies, dislocations, etc.). An activation energy characterizing this distribution is compared with a barrier height determined from the electronic structure calculations and a consistent model for methyl group rotation is developed. The compounds are 1,6-dimethylphenanthrene and 1,8-dimethylphenanthrene and the methyl group barriers being discussed and compared are in the 2–12 kJ mol{sup −1} range.

  1. Negative longitudinal electrostriction in polycrystalline ferroelectrics: a nonlinear approach

    Energy Technology Data Exchange (ETDEWEB)

    Turik, A V [Department of Physics, Rostov State University, Zorge 5, 344090 Rostov-on-Don (Russian Federation); Yesis, A A [Institute of Physics, Rostov State University, Stachki 194, 344090 Rostov-on-Don (Russian Federation); Reznitchenko, L A [Institute of Physics, Rostov State University, Stachki 194, 344090 Rostov-on-Don (Russian Federation)

    2006-05-24

    The longitudinal strains {xi}{sub 3} of initially unpoled polycrystalline (ceramic) ferroelectrics having different composition were measured as a function of the electric field strength E. The electric field dependences of the longitudinal piezoelectric coefficients d{sub 33}(E) and longitudinal electrostriction coefficients M{sub 33}(E) were calculated from the virgin {xi}{sub 3}(E) curves and analysed. It was shown that taking into account the polarization nonlinearity (that is, the dependence of dielectric susceptibility on E) leads to nonmonotonic field dependences d{sub 33}(E) and M{sub 33}(E). In a nonlinear system, the electrostrictive effect is due not only to polarization but also to the dependence of dielectric susceptibility on the electric field strength. The large magnitude of the dielectric susceptibility of soft and relaxor ferroelectric ceramics is responsible for the giant electrostriction being positive in low electric fields and negative in strong ones. The possibility of giant negative electrostriction existing has been found for the first time. In strong electric fields, the strain gain has a limitation because of the competition between the positive contribution of the piezoelectric effect and the negative contribution of electrostriction to the strain.

  2. Surface Analysis of 4-Aminothiophenol Adsorption at Polycrystalline Platinum Electrodes

    Science.gov (United States)

    Rosario-Castro, Belinda I.; Fachini, Estevao R.; Contes, Enid J.; Perez-Davis, Marla E.; Cabrera, Carlos R.

    2008-01-01

    Formation of self-assembled monolayer (SAM) of 4-aminothiophenol (4-ATP) on polycrystalline platinum electrodes has been studied by surface analysis and electrochemistry techniques. The 4-ATP monolayer was characterized by cyclic voltammetry (CV), Raman spectroscopy, reflection absorption infrared (RAIR) spectroscopy, and X-ray photoelectron spectroscopy (XPS). Cyclic voltammetry (CV) experiments give an idea about the packing quality of the monolayer. RAIR and Raman spectra for 4-ATP modified platinum electrodes showed the characteristic adsorption bands for neat 4-ATP indicating the adsorption of 4-ATP molecules on platinum surface. The adsorption on platinum was also evidenced by the presence of sulfur and nitrogen peaks by XPS survey spectra of the modified platinum electrodes. High resolution XPS studies and RAIR spectrum for platinum electrodes modified with 4-ATP indicate that molecules are sulfur-bonded to the platinum surface. The formation of S-Pt bond suggests that ATP adsorption gives up an amino terminated SAM. Thickness of the monolayer was evaluated via angle-resolved XPS (AR-XPS) analyses. Derivatization of 4-ATP SAM was performed using 16-Br hexadecanoic acid.

  3. Internal friction and elastic softening in polycrystalline Nb3Sn

    Science.gov (United States)

    Bussière, J. F.; Faucher, B.; Snead, C. L., Jr.; Welch, D. O.

    1981-10-01

    The vibrating-reed technique was used to measure internal friction and Young's modulus of polycrystalline Nb3Sn in the form of composite Nb-Nb3Sn tapes from 6 to 300 K. In tapes with only small residual strain in the A 15 layers, a dramatic increase in internal friction with decreasing temperature is observed with an abrupt onset at ~48 K. The internal friction Q-1 between 6 and 48 K is believed to be associated with stress-induced motion of martensitic-domain walls. In this temperature range, Q-1 is approximately proportional to the square of the tetragonal strain of the martensitic phase; Q-1~(ca-1)2. With residual compressive strains of ~0.2%, the internal friction associated with domain-wall motion is considerably reduced. This is attributed to a biasing of domain-wall orientation with residual stress, which reduces wall motion induced by the (much smaller) applied stress. The transformation temperature, however, is unchanged (within +/- 1 K) by residual strains of up to 0.2%. Young's modulus exhibits substantial softening on cooling from 300 to 6 K. This softening is substantially reduced in the presence of small residual compressive strains, indicating a highly nonlinear stress-strain relationship as previously reported for V 3Si.

  4. High-Efficiency Polycrystalline Thin Film Tandem Solar Cells.

    Science.gov (United States)

    Kranz, Lukas; Abate, Antonio; Feurer, Thomas; Fu, Fan; Avancini, Enrico; Löckinger, Johannes; Reinhard, Patrick; Zakeeruddin, Shaik M; Grätzel, Michael; Buecheler, Stephan; Tiwari, Ayodhya N

    2015-07-16

    A promising way to enhance the efficiency of CIGS solar cells is by combining them with perovskite solar cells in tandem devices. However, so far, such tandem devices had limited efficiency due to challenges in developing NIR-transparent perovskite top cells, which allow photons with energy below the perovskite band gap to be transmitted to the bottom cell. Here, a process for the fabrication of NIR-transparent perovskite solar cells is presented, which enables power conversion efficiencies up to 12.1% combined with an average sub-band gap transmission of 71% for photons with wavelength between 800 and 1000 nm. The combination of a NIR-transparent perovskite top cell with a CIGS bottom cell enabled a tandem device with 19.5% efficiency, which is the highest reported efficiency for a polycrystalline thin film tandem solar cell. Future developments of perovskite/CIGS tandem devices are discussed and prospects for devices with efficiency toward and above 27% are given.

  5. Ebic and Dlts measurements of Si-and polycrystalline silicon

    Energy Technology Data Exchange (ETDEWEB)

    Bary, A.; Hamet, J.F.; Ihlal, A.; Chermant, J.L.; Nouet, G.

    1988-10-01

    Influence of grain boundaries on the electronic properties of silicon has been studied by electron-beam induced current (EBIC), thermally stimulated capacitance (TSCAP) and deep-level transient spectroscopy (DLTS). Low-angle grain boundaries taken from as-grown polycrystalline wafers for solar cells have been analyzed by EBIC and their behaviors have been compared after the junction diffusion treatment. This treatment gives a decrease of the local diffusion length and recombination velocity of the minority carriers. TSCAP and DLTS methods have been applied to a coincidence orientation grain boundary ..sigma..13. These measurements have been made on a gold diffused bicrystal. These results are then compared with those of a bicrystal without gold diffusion. After annealing a narrow interface state continuum appears. On the contrary the gold diffusion prevents the formation of this continuum and only the donor level of gold is detected in the space charge region of the grain boundary (0 - 0.5 ..mu..m). This diffusion of phosphorus or gold can be interpreted as a grain boundary passivation.

  6. The initial interactions of oxygen with polycrystalline titanium surfaces

    Science.gov (United States)

    Azoulay, A.; Shamir, N.; Fromm, E.; Mintz, M. H.

    1997-01-01

    The interactions of gaseous oxygen and different types of polycrystalline titanium surfaces were studied at room temperature within the exposure range of 0-1000 L. Combined measurements utilizing direct recoils spectrometry (DRS), Auger electron spectroscopy (AES), X-ray photoelectron spectroscopy (XPS), and work function variations enabled the distinction between processes occurring on the topmost atomic layer and those associated with subsurface incorporation of oxygen. Also, the different chemical forms (oxidation states) developing during the exposure course were identified. The results were compared for three types of surfaces, each prepared by a different cleaning procedure. It has been concluded that: (i) Oxygen initially accumulates on the topmost atomic layer, regardless of the type of the studied surface. No preferred subsurface occupation has been observed. (ii) The kinetics of initial accumulation (up to a complete surface coverage) are similar for all the different types of surfaces. (iii) Mixtures of different oxidation states of titanium (0, +2, +3, +4) are present during the whole course of exposure. Qualitatively, increasing proportions of the higher valence states are displayed for higher oxygen exposures. However, the quantitative estimates of their relative amounts indicate a strong dependence on the type of surface, with preferred high oxidation (+4) states obtained for high temperature annealed samples (as compared with room temperature sputtered surfaces). (iv) Topmost oxygen atoms which terminate the oxides surfaces are less negatively charged than the underlying (i.e., subsurface) "oxidic" atoms. These results may account for some of the controversies presented in the literature.

  7. CVD-graphene growth on different polycrystalline transition metals

    Directory of Open Access Journals (Sweden)

    M. P. Lavin-Lopez

    2017-01-01

    Full Text Available The chemical vapor deposition (CVD graphene growth on two polycrystalline transition metals (Ni and Cu was investigated in detail using Raman spectroscopy and optical microscopy as a way to synthesize graphene of the highest quality (i.e. uniform growth of monolayer graphene, which is considered a key issue for electronic devices. Key CVD process parameters (reaction temperature, CH4/H2flow rate ratio, total flow of gases (CH4+H2, reaction time were optimized for both metals in order to obtain the highest graphene uniformity and quality. The conclusions previously reported in literature about the performance of low and high carbon solubility metals in the synthesis of graphene and their associated reaction mechanisms, i.e. surface depositionand precipitation on cooling, respectively, was not corroborated by the results obtained in this work. Under the optimal reaction conditions, a large percentage of monolayer graphene was obtained over the Ni foil since the carbon saturation was not complete, allowing carbon atoms to be stored in the bulk metal, which could diffuse forming high quality monolayer graphene at the surface. However, under the optimal reaction conditions, the formation of a non-uniform mixture of few layers and multilayer graphene on the Cu foil was related to the presence of an excess of active carbon atoms on the Cu surface.

  8. Interfaces fracas em compósitos de matriz cerâmica de alumina/alumina

    OpenAIRE

    Hablitzel,M.P.; Garcia,D.E.; Hotza,D.

    2011-01-01

    O uso de cerâmicas estruturais é limitado por sua fratura frágil. Compósitos de matriz cerâmica (CMCs) são materiais que possuem reforços estruturais que atuam aumentando a energia necessária para que o material se frature. O presente artigo apresenta uma alternativa para a produção de CMCs em que matriz e fibras são constituídas de alumina. Os mecanismos responsáveis pelo aumento da tenacidade ocorrem devido a uma interfase porosa entre matriz e fibras.

  9. Morphology-controlled electrochemical sensing amaranth at nanomolar levels using alumina

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Yuanyuan [School of Chemistry and Chemical Engineering, Huazhong University of Science and Technology, Wuhan 430074 (China); Gan, Tian [College of Chemistry and Chemical Engineering, Xinyang Normal University, Xinyang 464000 (China); Wan, Chidan [School of Chemistry and Chemical Engineering, Huazhong University of Science and Technology, Wuhan 430074 (China); Wu, Kangbing, E-mail: kbwu@hust.edu.cn [School of Chemistry and Chemical Engineering, Huazhong University of Science and Technology, Wuhan 430074 (China)

    2013-02-18

    Highlights: ► A facile way to tune morphology and sensing properties of alumina was developed. ► Oxidation activities of amaranth on alumina surface were morphology-dependent. ► Alumina microfibers were more active and greatly increased the signal of amaranth. ► Sensitive, rapid, selective and accurate method was developed for amaranth detection. -- Abstract: Different-shaped aluminas were readily prepared via hydrothermal reaction. It was found that the morphology and the electrochemical sensing properties of alumina were heavily dependent on the reaction time. When extending the reaction time from 6 h to 24 h, the obtained alumina samples changed from amorphous bumps to regular microfibers in diameter of 200 nm, as confirmed by scanning electron microscopy. Transmission electron microscopy observation revealed that longer reaction time was beneficial for the formation of porous and uniform fiber-like structures. Electrochemical tests proved that alumina microfibers were more active for the oxidation of amaranth and exhibited much higher enhancement effect, compared with alumina bumps. On the surface of alumina microfibers, the oxidation peak currents of amaranth increased remarkably. The influences of pH value, amount of alumina microfibers, and accumulation time on the signal enhancement of amaranth were discussed. As a result, a novel electrochemical method was developed for the detection of amaranth. The linear range was from 1 to 150 nM, and the detection limit was 0.75 nM after 1-min accumulation. The analytical application in drink samples was investigated, and the results consisted with the values that obtained by high-performance liquid chromatography.

  10. Extraction and characterization of alumina nanopowders from aluminum dross by acid dissolution process

    Science.gov (United States)

    Sarker, Md. Saifur Rahman; Alam, Md. Zahangir; Qadir, Md. Rakibul; Gafur, M. A.; Moniruzzaman, Mohammad

    2015-04-01

    A significant amount of aluminum dross is available as a waste in foundry industries in Bangladesh. In this study, alumina was extracted from aluminum dross collected from two foundry industries situated in Dhamrai and Manikgang, near the capital city, Dhaka. Aluminum dross samples were found to approximately contain 75wt% Al2O3 and 12wt% SiO2. An acid dissolution process was used to recover the alumina value from the dross. The effects of various parameters, e.g., temperature, acid concentration, and leaching time, on the extraction of alumina were studied to optimize the dissolution process. First, Al(OH)3 was produced in the form of a gel. Calcination of the Al(OH)3 gel at 1000°C, 1200°C, and 1400°C for 2 h produced γ-Al2O3, (α+γ)-Al2O3, and α-alumina powder, respectively. Thermal characterization of the Al(OH)3 gel was performed by thermogravimetric/differential thermal analysis (TG/DTA) and differential scanning calorimetry (DSC). The phases and crystallite size of the alumina were determined by X-ray diffraction analysis. The dimensions of the alumina were found to be on the nano level. The chemical compositions of the aluminum dross and alumina were determined by X-ray fluorescence (XRF) spectroscopy. The microstructure and morphology of the alumina were studied with scanning electron microscopy. The purity of the alumina extracted in this study was found to be 99.0%. Thus, it is expected that the obtained alumina powders can be potentially utilized as biomaterials.

  11. Synthesis of magnesium aluminate spinel by periclase and alumina chlorination

    Energy Technology Data Exchange (ETDEWEB)

    Orosco, Pablo, E-mail: porosco@unsl.edu.ar [Instituto de Investigaciones en Tecnología Química (INTEQUI), Chacabuco y Pedernera, San Luis (Argentina); Facultad de Química, Bioquímica y Farmacia, Universidad Nacional de San Luis Chacabuco y Pedernera, San Luis (Argentina); Barbosa, Lucía [Instituto de Investigaciones en Tecnología Química (INTEQUI), Chacabuco y Pedernera, San Luis (Argentina); Instituto de Ciencias Básicas (ICB), Universidad Nacional de Cuyo Parque General San Martín, Mendoza (Argentina); Ruiz, María del Carmen [Instituto de Investigaciones en Tecnología Química (INTEQUI), Chacabuco y Pedernera, San Luis (Argentina); Facultad de Química, Bioquímica y Farmacia, Universidad Nacional de San Luis Chacabuco y Pedernera, San Luis (Argentina)

    2014-11-15

    Highlights: • Use of chlorination for the synthesis of magnesium aluminate spinel. • The reagents used were alumina, periclase and chlorine. • Isothermal and non-isothermal assays were performed in air and Cl{sub 2}–N{sub 2} flows. • The chlorination produced magnesium aluminate spinel at 700 °C. • Selectivity of the chlorination reaction to obtain spinel is very high. - Abstract: A pyrometallurgical route for the synthesis of magnesium aluminate spinel by thermal treatment of a mechanical mixture containing 29 wt% MgO (periclase) and 71 wt% Al{sub 2}O{sub 3} (alumina) in chlorine atmosphere was developed and the results were compared with those obtained by calcining the same mixture of oxides in air atmosphere. Isothermal and non-isothermal assays were performed in an experimental piece of equipment adapted to work in corrosive atmospheres. Both reagents and products were analyzed by differential thermal analysis (DTA), X-ray diffraction (XRD) and X-ray fluorescence (XRF). Thermal treatment in Cl{sub 2} atmosphere of the MgO–Al{sub 2}O{sub 3} mixture produces magnesium aluminate spinel at 700 °C, while in air, magnesium spinel is generated at 930 °C. The synthesis reaction of magnesium aluminate spinel was complete at 800 °C.

  12. Thermochemical Analysis of Molybdenum Thin Films on Porous Alumina.

    Science.gov (United States)

    Lee, Kyoungjin; de Lannoy, Charles-François; Liguori, Simona; Wilcox, Jennifer

    2017-01-12

    Molybdenum (Mo) thin films (thickness thin-film composites were stable below 300 °C but had no reactivity toward gases. Mo thin films showed nitrogen incorporation on the surface as well as in the subsurface at 450 °C, as confirmed by X-ray photoelectron spectroscopy. The reactivity toward nitrogen was diminished in the presence of CO2, although no carbon species were detected either on the surface or in the subsurface. The Mo thin films have a very stable native oxide layer, which may further oxidize to higher oxidation states above 500 °C due to the reaction with the porous anodized alumina substrate. The oxidation of Mo thin films was accelerated in the presence of oxidizing gases. At 600 °C in N2, the Mo thin film on anodized alumina was completely oxidized and may also have been volatilized. The results imply that choosing thermally stable and inactive porous supports and operating in nonoxidizing conditions below 500 °C will likely maintain the stability of the Mo composite. This study provides key information about the chemical and structural stability of a Mo thin film on a porous substrate for future membrane applications and offers further insights into the integrity of thin-film composites when exposed to harsh conditions.

  13. Synthesis of Alumina Thin Films Using Reactive Magnetron Sputtering Method

    Science.gov (United States)

    Angarita, G.; Palacio, C.; Trujillo, M.; Arroyave, M.

    2017-06-01

    Alumina (Al2O3) thin films were deposited on Si (100) by Magnetron Sputtering in reactive conditions between an aluminium target and oxygen 99.99% pure. The plasma was formed employing Argon with an R.F power of 100 W, the dwelling time was 3 hours. 4 samples were produced with temperatures between 350 and 400 ºC in the substrate by using an oxygen flow of 2 and 8 sccm, the remaining parameters of the process were fixed. The coatings and substrates were characterized using Atomic Force Microscopy (AFM), Scanning Electron Microscopy (SEM), X-ray diffraction (XRD) and Energy Dispersive Spectroscopy (EDS) in order to compare their properties before and after deposition. The films thicknesses were between 47 and 70 nm. The results show that at high oxygen flow the alumina structure prevails in the coatings while at lower oxygen flow only aluminum is deposited in the coatings. It was shown that the temperature increases grain size and roughness while decreasing the thicknesses of the coatings.

  14. Oxidation of Alumina-Forming MAX Phases in Turbine Environments

    Science.gov (United States)

    Smialek, James; Garg, Anita; Harder, Bryan; Nesbitt, James; Gabb, Timothy; Gray, SImon

    2017-01-01

    Protective coatings for high temperature turbine components are based on YSZ thermal barriers and oxidation resistant, alumina-forming NiAl or NiCoCrAlY bond coats. Ti2AlC and Cr2AlC MAX phases are thus of special interest because of good oxidation resistance and CTE that can match Al2O3 and YSZ. Their alumina scales grow according to cubic kinetics due to grain growth in the scale, with initial heating dominated by fast TiO2 growth. Protective cubic kinetics are also found in high pressure burner rig tests of MAXthal 211 Ti2AlC, but with reduced rates due to volatile TiO(OH)2 formation in water vapor. YSZ-coatings on bulk Ti2AlC exhibit remarkable durability up to 1300C in furnace tests and at least a 25x life advantage compared to superalloys. At another extreme, Cr2AlC is resistant to low temperature Na2SO4 hot corrosion and exhibits thermal cycling stability bonded to a superalloy disk material. Accordingly, sputtered Cr2AlC coatings on disk specimens prevented hot corrosion detriments on LCF. Breakaway oxidation (Ti2AlC), scale spallation (Cr2AlC), interdiffusion, and processing as coatings still present serious challenges. However the basic properties of MAX phases provide some unusual opportunities for use in high temperature turbines.

  15. Alumina ceramics prepared with new pore-forming agents

    Directory of Open Access Journals (Sweden)

    Zuzana Živcová

    2008-06-01

    Full Text Available Porous ceramics have a wide range of applications at all length scales, ranging from fi ltration membranes and catalyst supports to biomaterials (scaffolds for bone ingrowths and thermally or acoustically insulating bulk materials or coating layers. Organic pore-forming agents (PFAs of biological origin can be used to control porosity, pore size and pore shape. This work concerns the characterization and testing of several less common pore-forming agents (lycopodium, coffee, fl our and semolina, poppy seed, which are of potential interest from the viewpoint of size, shape or availability. The performance of these new PFAs is compared to that of starch, which has become a rather popular PFA for ceramics during the last decade. The PFAs investigated in this work are in the size range from 5 μm (rice starch to approximately 1 mm (poppy seed, all with more or less isometric shape. The burnout behavior of PFAs is studied by thermal analysis, i.e. thermogravimetry and differential thermal analysis. For the preparation of porous alumina ceramics from alumina suspensions containing PFAs traditional slip casting (into plaster molds and starch consolidation casting (using metal molds are used in this work. The resulting microstructures are investigated using optical microscopy, combined with image analysis, as well as other methods (Archimedes method of double-weighing in water, mercury intrusion porosimetry.

  16. Wet chemical synthesis of nickel supported on alumina catalysts; Sintese de catalisadores de niquel suportado em alumina por via umida

    Energy Technology Data Exchange (ETDEWEB)

    Freire, Ranny Rodrigues; Costa, Talita Kenya Oliveira; Morais, Ana Carla da Fonseca Ferreira; Costa, Ana Cristina Figueiredo de Melo; Freitas, Normanda Lino de, E-mail: normanda@ufcg.edu.br [Universidade Federal de Campina Grande (UFCG), PB (Brazil)

    2016-07-01

    Heterogenic catalysts are those found to be in a different phase on the reaction when compared to the reactants and products. Preferred when compared to homogeneous catalysts due to the easiness on which the separation is processed. The objective of this study is to obtain and characterize Alumina based catalysts impregnated with Nickel (Al{sub 2}O{sub 3}), by wet impregnation. The alumina was synthesized by combustion reaction. Before and after the impregnation the catalysts were characterized by X-ray diffraction (XRD), granulometric analysis, the textural analysis will be held by nitrogen adsorption (BET), energy-dispersive X-ray spectroscopy (EDX) and scanning electron microscopy (SEM). The results show a presence of a stable crystalline phase of Al2O3 in all the studied samples and after the impregnation the second phase formed was of NiO and NiAl{sub 2}O{sub 4}. The Al{sub 2}O{sub 3} e Ni/Al{sub 2}O{sub 3} catalysts resulted in clusters with a medium diameter of 18.9 and 14.2 μm, respectively. The catalysts show a medium-pore characteristic (medium pore diameter between 2 and 50 nm), the superficial area to Al{sub 2}O{sub 3} and Ni/Al{sub 2}O{sub 3} catalysts were 8.69 m{sup 2}/g and 5.56 m{sup 2}/g, respectively. (author)

  17. X-ray residual stress measurement of alumina detonation coating. Bakuhatsu yosha alumina himaku no X sen zanryu oryoku sokutei

    Energy Technology Data Exchange (ETDEWEB)

    Tanaka, K.; Mine, N. (Kyoto University, Kyoto (Japan). Faculty of Engineering); Suzuki, K. (Niigata University, Niigata (Japan). Faculty of Engineering); Kawase, R. (Ariake Institute of Technology, Fukuoka (Japan))

    1991-01-15

    Alumina ceramics were coated on mild steel by a detonation gun with different amounts of detonation gas, and residual stresses in coated films were measured by X-ray diffraction from the (844) plane of {gamma}-alumina by Cu-K {alpha} radiation. Cracks and pores were observed on the film surface and cross section. The pore increased and the film bulk density decreased with a decrease in amount of detonation gas, and the mechanical Young {prime} s modulus decreased with an increase in pore. Since strains measured mechanically were those in the film bulk with pores while strains measured by X-ray were average values in only crystalline phases, the X-ray Young {prime} s modulus was larger than the mechanical one. The residual stress in films was a large tensile stress and distributed uniformly in films. The residual tensile stress decreased with an increase in amount of detonation gas, however, it was rather insensitive to the film thickness and surface grinding after coating. 10 refs., 8 figs., 2 tabs.

  18. Structural, optical and electrical properties of indium nitride polycrystalline films

    Energy Technology Data Exchange (ETDEWEB)

    Silva, M.V.S. da, E-mail: marcus.sansil@gmail.com [Instituto de Fisica, UFBA, Campus Ondina, 40210-340, Salvador (Brazil); David, D.G.F.; Pepe, I.; Ferreira da Silva, A.; Almeida, J.S. de [Instituto de Fisica, UFBA, Campus Ondina, 40210-340, Salvador (Brazil); Gazoto, A.L. [Instituto de Fisica Gleb Wataghin (IFGW), UNICAMP, 13083-859, Campinas, SP (Brazil); Santos, A.O. dos [Instituto de Fisica Gleb Wataghin (IFGW), UNICAMP, 13083-859, Campinas, SP (Brazil); CCSST, Universidade Federal do Maranhao, 65900-410 Imperatriz, MA (Brazil); Cardoso, L.P.; Meneses, E.A. [Instituto de Fisica Gleb Wataghin (IFGW), UNICAMP, 13083-859, Campinas, SP (Brazil); Graybill, D.L. [75 Logan Street Brooklyn, NY 11208 (United States); Mertes, K.M. [Los Alamos National Laboratory, Los Alamos, NM 8754 (United States)

    2012-05-31

    The structural, optical and electrical properties of InN polycrystalline films on glass substrate are investigated by means of X-ray photoelectron spectroscopy, Raman scattering measurements, X-ray diffraction analysis, optical spectroscopy, and electrical measurements as a function of the inverse of temperature. The absorption edge for the films is most likely due to an impurity band formed by the presence of defects in the material. Such an impurity band, located at 1.6 eV extends itself to about 1.8 eV above the Fermi level, and it is attributed to nitrogen vacancies present in the material. The Raman scattering data also reveal the incorporation of oxygen in the InN films, leading to the formation of the In{sub 2}O{sub 3} amorphous phase during the process of sputtering. Additionally, the X-ray photoelectron spectroscopy of the valence band, which is highly desirable to the determination of the Fermi level, confirms the optical gap energy. Furthermore, the X-ray diffraction patterns of the thinner films present broader peaks, indicating high values for the strain between the film lattice and the glass substrate. Finally, first principles calculations are used to investigate the optical properties of InN and also to support the experimental findings. - Highlights: Black-Right-Pointing-Pointer InN thin films with different thicknesses and good quality were synthesized. Black-Right-Pointing-Pointer Semiconductor behavior and some contamination by In{sub 2}O{sub 3} were found. Black-Right-Pointing-Pointer The band gap was close to 1.8 eV compared to 0.7 eV found in pure InN. Black-Right-Pointing-Pointer The electronic structure for this material was determined.

  19. Fundamentals of polycrystalline thin film materials and devices

    Energy Technology Data Exchange (ETDEWEB)

    Baron, B.N.; Birkmire, R.W.; Phillips, J.E.; Shafarman, W.N.; Hegedus, S.S.; McCandless, B.E. (Delaware Univ., Newark, DE (USA). Inst. of Energy Conversion)

    1991-01-01

    This report presents the results of a one-year research program on polycrystalline thin-film solar cells. The research was conducted to better understand the limitations and potential of solar cells using CuInSe{sub 2} and CdTe by systematically investigating the fundamental relationships linking material processing, material properties, and device behavior. By selenizing Cu and In layers, we fabricated device-quality CuInSe{sub 2} thin films and demonstrated a CuInSe{sub 2} solar cell with 7% efficiency. We added Ga, to increase the band gap of CuInSe{sub 2} devices to increase the open-circuit voltage to 0.55 V. We fabricated and analyzed Cu(InGa)Se{sub 2}/CuInSe{sub 2} devices to demonstrate the potential for combining the benefits of higher V{sub oc} while retaining the current-generating capacity of CuInSe{sub 2}. We fabricated an innovative superstrate device design with more than 5% efficiency, as well as a bifacial spectral-response technique for determining the electron diffusion length and optical absorption coefficient of CuInSe{sub 2} in an operational cell. The diffusion length was found to be greater than 1 {mu}m. We qualitatively modeled the effect of reducing heat treatments in hydrogen and oxidizing treatments in air on the I-V behavior of CuInSe{sub 2} devices. We also investigated post-deposition heat treatments and chemical processing and used them to fabricate a 9.6%-efficient CdTe/CdS solar cell using physical vapor deposition.

  20. Thermomechanical fatigue crack growth in a cast polycrystalline superalloy

    Directory of Open Access Journals (Sweden)

    Moverare Johan J.

    2014-01-01

    Full Text Available Thermomechanical fatigue (TMF crack growth testing has been performed on the polycrystalline superalloy IN792. All tests were conducted in mechanical strain control in the temperature range between 100 and 750 °C. The influence of in-phase (IP and out-of-phase (OP TMF cycles was investigated as well as the influence of applying extended dwell times (up to 6 hours at the maximum temperature. The crack growth rates were also evaluated based on linear elastic fracture mechanics and described as a function of the stress intensity factor KI. Without dwell time at the maximum temperature, the crack growth rates are generally higher for the OP-TMF cycle compared to the IP-TMF cycle, when equivalent nominal strain ranges are compared. However, due to the fact that the tests were conducted in mechanical strain control, the stress response is very different for the IP and OP cycles. Also the crack closure level differs significantly between the cycle types. By taking the stress response into account and comparing the crack growth rates for equivalent effective stress intensity factor rages ΔKeff defined as Kmax − Kclosure, very similar crack growth rates were actually noticed independent of whether an IP or OP cycle were used. While the introduction of a 6 hour dwell time significantly increased the crack growth rates for the IP-TMF cycle, a decrease in crack growth rates versus ΔKeff were actually seen for the OP-TMF cycle. The fracture behaviour during the different test conditions has been investigated using scanning electron microscopy.