WorldWideScience

Sample records for geant3 simulation studies

  1. Validation of GEANT3 simulation studies with a dual-head PMT ClearPET TM prototype

    CERN Document Server

    Ziemons, K; Streun, M; Pietrzyk, U

    2004-01-01

    The ClearPET TM project is proposed by working groups of the Crystal Clear Collaboration (CCC) to develop a 2/sup nd/ generation high performance small animal positron emission tomograph (PET). High sensitivity and high spatial resolution is foreseen for the ClearPET TM camera by using a phoswich arrangement combining mixed lutetium yttrium aluminum perovskite (LuYAP:Ce) and lutetium oxyorthosilicate (LSO) scintillating crystals. Design optimizations for the first photomultiplier tube (PMT) based ClearPET camera are done with a Monte-Carlo simulation package implemented on GEANT3 (CERN, Geneva, Switzerland). A dual-head prototype has been built to test the frontend electronics and was used to validate the implementation of the GEANT3 simulation tool. Multiple simulations were performed following the experimental protocols to measure the intrinsic resolution and the sensitivity profile in axial and radial direction. Including a mean energy resolution of about 27.0% the simulated intrinsic resolution is about (...

  2. Simulation of UHE muons propagation for GEANT3

    OpenAIRE

    S. BottaiU.and INFN - Firenze; Perrone, L.

    2015-01-01

    A simulation package for the transport of high energy muons has been developed. It has been conceived to replace the muon propagation software modules implemented in the detector simulation program GEANT3. Here we discuss the results achieved with our package and we check the agreement with numerical calculations up to 10**8 GeV.

  3. Monte Carlo simulation of the electron transport through thin slabs: A comparative study of PENELOPE, GEANT3, GEANT4, EGSnrc and MCNPX

    Energy Technology Data Exchange (ETDEWEB)

    Vilches, M. [Servicio de Fisica y Proteccion Radiologica, Hospital Regional Universitario ' Virgen de las Nieves' , Avda. de las Fuerzas Armadas, 2, E-18014 Granada (Spain)]. E-mail: mvilches@ugr.es; Garcia-Pareja, S. [Servicio de Radiofisica Hospitalaria, Hospital Regional Universitario ' Carlos Haya' , Avda. Carlos Haya, s/n, E-29010 Malaga (Spain)]. E-mail: garciapareja@gmail.com; Guerrero, R. [Servicio de Radiofisica, Hospital Universitario ' San Cecilio' , Avda. Dr. Oloriz, 16, E-18012 Granada (Spain)]. E-mail: rafael.guerrero.alcalde.sspa@juntadeandalucia.es; Anguiano, M. [Departamento de Fisica Atomica, Molecular y Nuclear, Universidad de Granada, E-18071 Granada (Spain)]. E-mail: mangui@ugr.es; Lallena, A.M. [Departamento de Fisica Atomica, Molecular y Nuclear, Universidad de Granada, E-18071 Granada (Spain)]. E-mail: lallena@ugr.es

    2007-01-15

    The Monte Carlo simulation of the electron transport through thin slabs is studied with five general purpose codes: PENELOPE, GEANT3, GEANT4, EGSnrc and MCNPX. The different material foils analyzed in the old experiments of Kulchitsky and Latyshev [L.A. Kulchitsky, G.D. Latyshev, Phys. Rev. 61 (1942) 254] and Hanson et al. [A.O. Hanson, L.H. Lanzl, E.M. Lyman, M.B. Scott, Phys. Rev. 84 (1951) 634] are used to perform the comparison between the Monte Carlo codes. Non-negligible differences are observed in the angular distributions of the transmitted electrons obtained with the some of the codes. The experimental data are reasonably well described by EGSnrc, PENELOPE (v.2005) and GEANT4. A general good agreement is found for EGSnrc and PENELOPE (v.2005) in all the cases analyzed.

  4. Comparison of GEANT4 Simulations with Testbeam Data and GEANT3 for the ATLAS Liquid Argon Calorimeter

    Institute of Scientific and Technical Information of China (English)

    D.Benchekroun; G.Karapetian; 等

    2001-01-01

    We present several comparisons of GEANT4 simulations with test beam data and GEANT3 simulations for different liquid argon(LAr) calorimeters of the ATLAS detector,All relevant parts of the test beam setup(scintilators,multi wire proportional chambers,cryostat etc.)are described in GEANT4 as well as in GEANT3.Muon and electron data at different energies have been compared with Monte Carlo prediction.

  5. Monte Carlo Simulation of Electron Beams for Radiotherapy - EGS4, MCNP4b and GEANT3 Intercomparison

    CERN Document Server

    Trindade, A; Alves, C M; Chaves, A; Lopes, C; Oliveira, C; Peralta, L

    2000-01-01

    In medical radiation physics, an increasing number of Monte Carlo codes are being used, which requires intercomparison between them to evaluated the accuracy of the simulated results against benchmark experiments. The Monte Carlo code EGS4, commonly used to simulate electron beams from medical linear accelerators, was compared with GEANT3 and MCNP4b. Intercomparison of electron energy spectra, angular and spatial distribution were carried out for the Siemens KD2 linear accelerator, at beam energies of 10 and 15 MeV for a field size of 10x10 cm2. Indirect validation was performed against electron depth doses curves and beam profiles measured in a MP3-PTW water phantom using a Markus planar chamber. Monte Carlo isodose lines were reconstructed and compared to those from commercial treatment planning systems (TPS's) and with experimental data.

  6. Monte Carlo Simulation of Electron Beams for Radiotherapy - EGS4, MCNP4b and GEANT3 Intercomparison

    Science.gov (United States)

    Trindade, A.; Rodrigues, P.; Alves, C.; Chaves, A.; Lopes, M. C.; Oliveira, C.; Peralta, L.

    In medical radiation physics, an increasing number of Monte Carlo codes are being used, which requires intercomparison between them to evaluated the accuracy of the simulated results against benchmark experiments. The Monte Carlo code EGS4, commonly used to simulate electron beams from medical linear accelerators, was compared with GEANT3 and MCNP4b. Intercomparison of electron energy spectra, angular and spatial distribution were carried out for the Siemens KD2 linear accelerator, at beam energies of 10 and 15 MeV for a field size of 10x10 cm2. Indirect validation was performed against electron depth doses curves and beam profiles measured in a MP3-PTW water phantom using a Markus planar chamber. Monte Carlo isodose lines were reconstructed and compared to those from commercial treatment planning systems (TPS's) and with experimental data.

  7. Implementation of the LPM effect in the discrete-bremsstrahlung simulation of GEANT 3 and GEANT 4

    Energy Technology Data Exchange (ETDEWEB)

    Mangiarotti, A. [Laboratorio de Instrumentacao e Fisica Experimental de Parti' culas, Coimbra (Portugal); Ballestrero, S. [School of Physics, University of the Witwatersrand, Johannesburg (South Africa); Sona, P. [Dipartimento di Fisica, Universita degli Studi di Firenze, Polo Scientifico, Sesto F.no, Via G. Sansone 1, Sesto Fiorentino 50019 , Firenze (Italy)], E-mail: pietro.sona@fi.infn.it; Uggerhoj, U.I. [Department of Physics and Astronomy, University of Aarhus, Aarhus (Denmark)

    2008-12-15

    Experimental data, recently measured at CERN, on the LPM effect have been used to benchmark the description of the discrete bremsstrahlung incorporated into the GEANT 3 and GEANT 4 codes. The limited accuracy of the native versions required a major revision in the framework of the original Migdal theory. The results obtained with the new implementation agree quite satisfactorily with measurements. The stability of the calculations when several parameters are varied has been thoroughly investigated.

  8. A method for detector description exchange among ROOT GEANT4 and GEANT3

    Institute of Scientific and Technical Information of China (English)

    YOU Zheng-Yun; LIANG Yu-Tie; MAO Ya-Jun

    2008-01-01

    GEANT3 and GEANT4 are the detector simulation software programs that are widely used in most nuclear and particle physics experiments. ROOT is a program for framework, data analysis, online and offline software. Detector description is an important function in all these programs. Due to different detector construction methods and respective detector data representative, it is difficult to exchange the detector data among them. A new method based on GDML is developed to automatically convert the detector data among ROOT, GEANT4 and GEANT3. Any existing detector geometry in one program can be mapped to the geometry in the other two programs. In the software development of an experiment, different applications can share and reuse the same detector description. The application of this method in the PHENIX experiment upgrade and PHENIX Forward Vertex Silicon detector design is introduced.

  9. Simulation studies of the response function of a radioactive waste assay system

    Energy Technology Data Exchange (ETDEWEB)

    Gurau, Daniela, E-mail: daniela.gurau@ymail.com [Horia Hulubei National Institute for Physics and Nuclear Engineering, P.O.B. MG-6, RO-077125 Magurele (Romania); Sima, Octavian [Physics Department, Bucharest University, P.O.B. MG-11, RO-077125 Magurele (Romania)

    2012-01-15

    A simulation program based on GEANT 3.21 toolkit was developed to simulate the response function of ISOCART (Ortec) gamma-ray spectrometry system applied to radioactive waste drum assessment. In view of studying the effects of possible non-homogeneous radioactivity distribution in the drum, the volume of the drum was fictitiously divided into several spatial domains. The simulation program was applied repeatedly considering each time the source distributed in another domain. In this way the expected spectra in the energy range from 50 to 2000 keV as well as the full energy peak and the total efficiencies were obtained for the case when the source is distributed in each domain and also for the case when the source is uniformly distributed in the entire drum. - Highlights: Black-Right-Pointing-Pointer Calculation technique for calibration of radioactive waste. Black-Right-Pointing-Pointer The Monte Carlo simulation program was based on GEANT 3.21 toolkit. Black-Right-Pointing-Pointer Response function of ISOCART gamma-ray spectrometry evaluated. Black-Right-Pointing-Pointer Volume of the drum fictitiously divided into several spatial domains. Black-Right-Pointing-Pointer Full energy peak and total efficiencies evaluated.

  10. Simulation studies of the response function of a radioactive waste assay system.

    Science.gov (United States)

    Gurau, Daniela; Sima, Octavian

    2012-01-01

    A simulation program based on GEANT 3.21 toolkit was developed to simulate the response function of ISOCART (Ortec) gamma-ray spectrometry system applied to radioactive waste drum assessment. In view of studying the effects of possible non-homogeneous radioactivity distribution in the drum, the volume of the drum was fictitiously divided into several spatial domains. The simulation program was applied repeatedly considering each time the source distributed in another domain. In this way the expected spectra in the energy range from 50 to 2000keV as well as the full energy peak and the total efficiencies were obtained for the case when the source is distributed in each domain and also for the case when the source is uniformly distributed in the entire drum. Copyright © 2011 Elsevier Ltd. All rights reserved.

  11. Monte Carlo simulations of SOHO/EPHIN instrument response to hydrogen and helium isotopes

    CERN Document Server

    Gómez-Herrero, R; Rodríguez-Friás, M D; Gutíerrez, J; Hernández-Encinas, L; Yetim, F

    2002-01-01

    Numerical simulations are a valuable tool when designing and characterizing particle telescopes. Simulation results can be used to improve the quality of experimental data analysis. In this work a Monte Carlo simulation code based on CERN tool GEANT 3.21 has been used to follow the SOHO/EPHIN instrument response to the detection of hydrogen and helium nuclei. Energy-dependent geometric factors and energy intervals of effective detection have been obtained separately for each isotope (/sup 1/H, /sup 2/H, /sup 3/He, and /sup 4/He). Energy measurement exactitude and incident directions have also been studied. (5 refs).

  12. Conducting Simulation Studies in Psychometrics

    Science.gov (United States)

    Feinberg, Richard A.; Rubright, Jonathan D.

    2016-01-01

    Simulation studies are fundamental to psychometric discourse and play a crucial role in operational and academic research. Yet, resources for psychometricians interested in conducting simulations are scarce. This Instructional Topics in Educational Measurement Series (ITEMS) module is meant to address this deficiency by providing a comprehensive…

  13. Simulation in International Studies

    Science.gov (United States)

    Boyer, Mark A.

    2011-01-01

    Social scientists have long worked to replicate real-world phenomena in their research and teaching environments. Unlike our biophysical science colleagues, we are faced with an area of study that is not governed by the laws of physics and other more predictable relationships. As a result, social scientists, and international studies scholars more…

  14. Simulation of hadronic showers in the ATLAS liquid argon calorimeters

    CERN Document Server

    Kiryunin, A E; Strízenec, P; Kish, J; Loch, P; Mazini, R

    2002-01-01

    Results of Geant4 based simulations of the response of the ATLAS hadronic end-cap calorimeter to charged pions are presented. The first results of hadronic simulations with Geant4 for the ATLAS forward calorimeter are shown as well. Predictions of Geant4 and Geant3 on energy response and resolution for charged pions are compared. Where it is possible, the comparison with experimental results of beam tests is done. (6 refs).

  15. Comparisons of Electron and Muon Signals in the Atlas Liquid Argon Calorimeters with GEANT4 Simulations

    Science.gov (United States)

    Benchekroun, D.; Karpetian, G.; Mazini, R.; Kiryunin, A.; Salihagic, D.; Strizenec, P.; Kish, J.; Kordas, K.; Parrour, G.; Leltchouk, M.; Negroni, S.; Seligman, W.; Loch, P.; Soukharev, A.

    2002-01-01

    Signals from electrons and muons taken at testbeams with different modules of the ATLAS Liquid Argon Calorimeter have been compared to corresponding simulations using the GEANT4 toolkit. These simulations have also been compared in some detail with GEANT3 based predictions. Results for signal linearity, energy resolution, and shower shapes all generally indicate a good agreement between experiment and the two simulation packages, typically at the level of a few percent.

  16. A Monte Carlo study of a high resolution $\\gamma$-detector for small organ imaging in Nuclear Medicine

    CERN Document Server

    Ortigão, C

    2004-01-01

    A reliable Monte Carlo simulation study is of significance importance to evaluate the performance of a gamma-ray detector and the search for compromises between spatial resolution, sensitivity and energy resolution. The development of a simulation package for a new compact gamma camera based on GEANT3 is described in this report. This simulation takes into account the interaction of gamma-rays in the crystal, the production and transport of scintillation photons and allows an accurate radiation transport description of photon attenuation in high-Z collimators, for SPECT applications. In order to achieve the best setup configuration different detector arrangements were explored, namely different scintillation crystals, coatings, reflector properties and polishing types. The conventional detector system, based on PMT light readout, was compared with an HPD system. Different collimators were studied for high resolution applications with compact gamma-cameras.

  17. EIC detector simulations in FairRoot framework

    Science.gov (United States)

    Kiselev, Alexander; eRHIC task force Team

    2013-10-01

    The long-term RHIC facility upgrade plan foresees the addition of a high-energy electron beam to the existing hadron accelerator complex thus converting RHIC into an Electron-Ion Collider (eRHIC). A dedicated EIC detector, designed to efficiently register and identify deep inelastic electron scattering (DIS) processes in a wide range of center-of-mass energies is one of the key elements of this upgrade. Detailed Monte-Carlo studies are needed to optimize EIC detector components and to fine tune their design. The simulation package foreseen for this purpose (EicRoot) is based on the FairRoot framework developed and maintained at the GSI. A feature of this framework is its level of flexibility, allowing one to switch easily between different geometry (ROOT, GEANT) and transport (GEANT3, GEANT4, FLUKA) models. Apart from providing a convenient simulation environment the framework includes basic tools for visualization and allows for easy sharing of event reconstruction codes between higher level experiment-specific applications. The description of the main EicRoot features and first simulation results will be the main focus of the talk.

  18. Experimental and simulated efficiency of a HPGe detector with point-like and extended sources

    CERN Document Server

    Karamanis, D; Andriamonje, Samuel A; Barreau, G; Petit, M

    2002-01-01

    The absolute efficiency of a high purity germanium (HPGe) detector was determined with a point-like calibrated sup 1 sup 5 sup 2 Eu source at two distances from the detector and three pure metallic thorium foils of different thicknesses. The experimental values are compared with the ones determined with the simulation codes MCNP4B and GEANT 3.21. A procedure for HPGe absolute efficiency calibration is proposed for gamma-ray energies higher than 200 keV.

  19. A general semi-analytic method to simulate discrete bremsstrahlung at very low radiated photon energies by the Monte Carlo method

    Energy Technology Data Exchange (ETDEWEB)

    Mangiarotti, A. [Laboratorio de Instrumentacao e Fisica Experimental de Particulas, Coimbra (Portugal); Departamento de Fisica, Faculdade de Ciencias e Tecnologia, Universidade de Coimbra, Coimbra (Portugal); Sona, P., E-mail: pietro.sona@fi.infn.it [Dipartimento di Fisica, Universita degli Studi di Firenze, Polo Scientifico, Via G. Sansone 1, 50019 Sesto Fiorentino (Italy); INFN, Sezione di Firenze, Polo Scientifico, Via G. Sansone 1, 50019 Sesto Fiorentino (Italy); Ballestrero, S. [Department of Physics, University of Johannesburg, Johannesburg (South Africa); PH/ADT, CERN, CH-1211, Geneve (Switzerland); Uggerhoj, U.I. [Department of Physics and Astronomy, University of Aarhus, Aarhus (Denmark)

    2011-09-15

    A computer code for Monte-Carlo simulations in the framework of the GEANT 3 toolkit has been implemented for the description of the discrete bremsstrahlung radiation from high energy electrons crossing thick (semi-infinite) targets. The code is based on the Migdal theory which includes the LPM and dielectric suppression. Validation of the code has been performed by a comparison with the data from the SLAC E-146 experiment. The agreement between simulations and experimental data is generally very good.

  20. Simulation Studies in Data Replication Strategies

    Institute of Scientific and Technical Information of China (English)

    HarveyB.Newman; IosifC.Legrand

    2001-01-01

    The aim of this work is to present the simulation studies in evaluating different data replication strategies between Regional Centers.The simulation Framework developed within the "Models of Networked Analysis at Rgional Centers”(MONARC) project,as a design and optimization tool for large scale distributed systems,has been used for these modeling studies.Remote client-serer access to database servers as well as ftp-like data transfers have been ralistically simulated and the performance and limitations are presented as a function of the characteristics of the protocol used and the network parameters.

  1. Crop micrometeorology : a simulation study

    NARCIS (Netherlands)

    Goudriaan, J.

    1977-01-01

    This monograph presents the results of a detailed study in micrometeorology; one of the sciences that play an important role in production ecology. The purpose is to explain the microweather as a function of the properties of plant and soil, and of the weather conditions prevalent at some

  2. Crop micrometeorology: a simulation study

    NARCIS (Netherlands)

    Goudriaan, J.

    1977-01-01

    This monograph presents the results of a detailed study in micrometeorology; one of the sciences that play an important role in production ecology. The purpose is to explain the microweather as a function of the properties of plant and soil, and of the weather conditions prevalent at some height abo

  3. The PandaRoot framework for simulation, reconstruction and analysis

    Science.gov (United States)

    Spataro, Stefano; PANDA Collaboration

    2011-12-01

    The PANDA experiment at the future facility FAIR will study anti-proton proton and anti-proton nucleus collisions in a beam momentum range from 2 GeV/c up to 15 GeV/c. The PandaRoot framework is part of the FairRoot project, a common software framework for the future FAIR experiments, and is currently used to simulate detector performances and to evaluate different detector concepts. It is based on the packages ROOT and Virtual MonteCarlo with Geant3 and Geant4. Different reconstruction algorithms for tracking and particle identification are under development and optimization, in order to achieve the performance requirements of the experiment. In the central tracker a first track fit is performed using a conformal map transformation based on a helix assumption, then the track is used as input for a Kalman Filter (package genfit), using GEANE as track follower. The track is then correlated to the pid detectors (e.g. Cerenkov detectors, EM Calorimeter or Muon Chambers) to evaluate a global particle identification probability, using a Bayesian approach or multivariate methods. Further implemented packages in PandaRoot are: the analysis tools framework Rho, the kinematic fitter package for vertex and mass constraint fits, and a fast simulation code based upon parametrized detector responses. PandaRoot was also tested on an Alien-based GRID infrastructure. The contribution will report about the status of PandaRoot and show some example results for analysis of physics benchmark channels.

  4. The Monte Carlo code CSSE for the simulation of realistic thermal neutron sensor devices for Humanitarian Demining

    Energy Technology Data Exchange (ETDEWEB)

    Palomba, M. E-mail: maurizio.palomba@ba.infn.it; D' Erasmo, G.; Pantaleo, A

    2003-02-11

    The CSSE code, a GEANT3-based Monte Carlo simulation program, has been developed in the framework of the EXPLODET project (Nucl. Instr. and Meth. A 422 (1999) 918) with the aim to simulate experimental set-ups employed in Thermal Neutron Analysis (TNA) for the landmines detection. Such a simulation code appears to be useful for studying the background in the {gamma}-ray spectra obtained with this technique, especially in the region where one expects to find the explosive signature (the {gamma}-ray peak at 10.83 MeV coming from neutron capture by nitrogen). The main features of the CSSE code are introduced and original innovations emphasized. Among the latter, an algorithm simulating the time correlation between primary particles, according with their time distributions is presented. Such a correlation is not usually achievable within standard GEANT-based codes and allows to reproduce some important phenomena, as the pulse pile-up inside the NaI(Tl) {gamma}-ray detector employed, producing a more realistic detector response simulation. CSSE has been successfully tested by reproducing a real nuclear sensor prototype assembled at the Physics Department of Bari University.

  5. The Monte Carlo code CSSE for the simulation of realistic thermal neutron sensor devices for Humanitarian Demining

    Science.gov (United States)

    Palomba, M.; D'Erasmo, G.; Pantaleo, A.

    2003-02-01

    The CSSE code, a GEANT3-based Monte Carlo simulation program, has been developed in the framework of the EXPLODET project (Nucl. Instr. and Meth. A 422 (1999) 918) with the aim to simulate experimental set-ups employed in Thermal Neutron Analysis (TNA) for the landmines detection. Such a simulation code appears to be useful for studying the background in the γ-ray spectra obtained with this technique, especially in the region where one expects to find the explosive signature (the γ-ray peak at 10.83 MeV coming from neutron capture by nitrogen). The main features of the CSSE code are introduced and original innovations emphasized. Among the latter, an algorithm simulating the time correlation between primary particles, according with their time distributions is presented. Such a correlation is not usually achievable within standard GEANT-based codes and allows to reproduce some important phenomena, as the pulse pile-up inside the NaI(Tl) γ-ray detector employed, producing a more realistic detector response simulation. CSSE has been successfully tested by reproducing a real nuclear sensor prototype assembled at the Physics Department of Bari University.

  6. Computer Simulation Study of Bipolaron Formation

    NARCIS (Netherlands)

    Raedt, H. De; Lagendijk, A.

    1986-01-01

    Monte Carlo computer simulation techniques are used to study the formation of bipolarons on a lattice. The transition between the three possible states, extended, two-polaron, and bipolaron is studied. The phase diagram as a function of the strengths of the electron-phonon coupling and repulsive int

  7. Digital Simulation Games for Social Studies Classrooms

    Science.gov (United States)

    Devlin-Scherer, Roberta; Sardone, Nancy B.

    2010-01-01

    Data from ten teacher candidates studying teaching methods were analyzed to determine perceptions toward digital simulation games in the area of social studies. This research can be used as a conceptual model of how current teacher candidates react to new methods of instruction and determine how education programs might change existing curricula…

  8. SLUDGE BATCH 5 SIMULANT FLOWSHEET STUDIES

    Energy Technology Data Exchange (ETDEWEB)

    Lambert, D; Michael Stone, M; Bradley Pickenheim, B; David Best, D; David Koopman, D

    2008-10-03

    The Defense Waste Processing Facility (DWPF) will transition from Sludge Batch 4 (SB4) processing to Sludge Batch 5 (SB5) processing in early fiscal year 2009. Tests were conducted using non-radioactive simulants of the expected SB5 composition to determine the impact of varying the acid stoichiometry during the Sludge Receipt and Adjustment Tank (SRAT) and Slurry Mix Evaporator (SME) processes. The work was conducted to meet the Technical Task Request (TTR) HLW/DWPF/TTR-2007-0007, Rev. 1 and followed the guidelines of a Task Technical and Quality Assurance Plan (TT&QAP). The flowsheet studies are performed to evaluate the potential chemical processing issues, hydrogen generation rates, and process slurry rheological properties as a function of acid stoichiometry. Initial SB5 flowsheet studies were conducted to guide decisions during the sludge batch preparation process. These studies were conducted with the estimated SB5 composition at the time of the study. The composition has changed slightly since these studies were completed due to changes in the washing plan to prepare SB5 and the estimated SB4 heel mass. Nine DWPF process simulations were completed in 4-L laboratory-scale equipment using both a batch simulant (Tank 51 simulant after washing is complete) and a blend simulant (Tank 40 simulant after Tank 51 transfer is complete). Each simulant had a set of four SRAT and SME simulations at varying acid stoichiometry levels (115%, 130%, 145% and 160%). One additional run was made using blend simulant at 130% acid that included additions of the Actinide Removal Process (ARP) waste prior to acid addition and the Modular Caustic Side Solvent Extraction (CSSX) Unit (MCU) waste following SRAT dewatering. There are several parameters that are noteworthy concerning SB5 sludge: (1) This is the first batch DWPF will be processing that contains sludge that has had a significant fraction of aluminum removed through aluminum dissolution. (2) The sludge is high in mercury

  9. Study of Cardiac Defibrillation Through Numerical Simulations

    Science.gov (United States)

    Bragard, J.; Marin, S.; Cherry, E. M.; Fenton, F. H.

    Three-dimensional numerical simulations of the defibrillation problem are presented. In particular, in this study we use the rabbit ventricular geometry as a realistic model system for evaluating the efficacy of defibrillatory shocks. Statistical data obtained from the simulations were analyzed in term of a dose-response curve. Good quantitative agreement between our numerical results and clinically relevant values is obtained. An electric field strength of about 6.6 V/cm indicates a fifty percent probability of successful defibrillation for a 12-ms monophasic shock. Our validated model will be useful for optimizing defibrillation protocols.

  10. Empathy Development Through Case Study and Simulation.

    Science.gov (United States)

    Mennenga, Heidi A; Bassett, Susan; Pasquariello, Libby

    2016-01-01

    Because empathy is integral to the nurse-patient relationship, nurse educators are challenged to explore teaching strategies that may aid in the development of empathy among students. The purpose of this study was to determine whether consistent exposure to a single patient through case study and simulation had an impact on empathy levels in senior-level baccalaureate nursing students. Results provide interesting conclusions for faculty members and offer a basis for ongoing discussion.

  11. Study of Nanowires Using Molecular Dynamics Simulations

    OpenAIRE

    Monk, Joshua D

    2007-01-01

    In this dissertation I present computational studies that focus on the unique characteristics of metallic nanowires. We generated virtual nanowires of nanocrystalline nickel (nc-Ni) and single crystalline silver (Ag) in order to investigate particular nanoscale effects. Three-dimensional atomistic molecular dynamics studies were performed for each sample using the super computer System X located at Virginia Tech. Thermal grain growth simulations were performed on 4 nm grain size nc-Ni by o...

  12. GEANT4 simulation of gamma ray in a double-gap resistive plate chamber

    Institute of Scientific and Technical Information of China (English)

    J. T. Rhee; M. Jamil; Steve Hall; Y. J. Jeon

    2006-01-01

    For more than 20 years nuclear physicists have used the GEANT code to simulate particle-matter interaction. In most recent version, GEANT4 is a toolkit for simulating the passage of particles though matter, which contains a complete range of functionality including tracking, geometry, physics models, and hits. In this article, an attempt to use GEANT4 to model a double-gap resistive plate chamber (RFC) with its improved efficiency is presented. The efficiencies of the double-gap RFC have been evaluated as a function of gamma energy range 0.005-1OOOMeV. A comparison to available previous simulation package GEANT3 data is also performed.

  13. Simulation study of disruption characteristics in KSTAR

    Science.gov (United States)

    Lee, Jongkyu; Kim, J. Y.; Kessel, C. E.; Poli, F.

    2012-10-01

    A detailed simulation study of disruption in KSTAR had been performed using the Tokamak Simulation Code(TSC) [1] during the initial design phase of KSTAR [2]. Recently, however, a partial modification in the structure of passive plate was made in relation to reduce eddy current and increase the efficiency of control of vertical position. A substantial change can then occur in disruption characteristics and plasma behavior during disruption due to changes in passive plate structure. Because of this, growth rate of vertical instability is expected to be increased and eddy current and its associated electomagnetic force are expected to be reduced. To check this in more detail, a new simulation study is here given with modified passive plate structure of KSTAR. In particular, modeling of vertical disruption that is vertical displacement event (VDE) was carried out. We calculated vertical growth rate for a drift phase of plasma and electromagnetic force acting on PFC structures and compared the results between in a new model and an old model. [4pt] [1] S.C. Jardin, N. Pomphrey and J. Delucia, J. Comp. Phys. 66, 481 (1986).[0pt] [2] J.Y. Kim, S.Y. Cho and KSTAR Team, Disruption load analysis on KSTAR PFC structures, J. Accel. Plasma Res. 5, 149 (2000).

  14. DWPF Simulant CPC Studies For SB8

    Energy Technology Data Exchange (ETDEWEB)

    Newell, J. D.

    2013-09-25

    Prior to processing a Sludge Batch (SB) in the Defense Waste Processing Facility (DWPF), flowsheet studies using simulants are performed. Typically, the flowsheet studies are conducted based on projected composition(s). The results from the flowsheet testing are used to 1) guide decisions during sludge batch preparation, 2) serve as a preliminary evaluation of potential processing issues, and 3) provide a basis to support the Shielded Cells qualification runs performed at the Savannah River National Laboratory (SRNL). SB8 was initially projected to be a combination of the Tank 40 heel (Sludge Batch 7b), Tank 13, Tank 12, and the Tank 51 heel. In order to accelerate preparation of SB8, the decision was made to delay the oxalate-rich material from Tank 12 to a future sludge batch. SB8 simulant studies without Tank 12 were reported in a separate report.1 The data presented in this report will be useful when processing future sludge batches containing Tank 12. The wash endpoint target for SB8 was set at a significantly higher sodium concentration to allow acceptable glass compositions at the targeted waste loading. Four non-coupled tests were conducted using simulant representing Tank 40 at 110-146% of the Koopman Minimum Acid requirement. Hydrogen was generated during high acid stoichiometry (146% acid) SRAT testing up to 31% of the DWPF hydrogen limit. SME hydrogen generation reached 48% of of the DWPF limit for the high acid run. Two non-coupled tests were conducted using simulant representing Tank 51 at 110-146% of the Koopman Minimum Acid requirement. Hydrogen was generated during high acid stoichiometry SRAT testing up to 16% of the DWPF limit. SME hydrogen generation reached 49% of the DWPF limit for hydrogen in the SME for the high acid run. Simulant processing was successful using previously established antifoam addition strategy. Foaming during formic acid addition was not observed in any of the runs. Nitrite was destroyed in all runs and no N2O was detected

  15. Simulation study supporting wastewater treatment plant upgrading.

    Science.gov (United States)

    Hvala, N; Vrecko, D; Burica, O; Strazar, M; Levstek, M

    2002-01-01

    The paper presents a study where upgrading of an existing wastewater treatment plant was supported by simulation. The aim of the work was to decide between two technologies to improve nitrogen removal: a conventional activated sludge process (ASP) and a moving bed biofilm reactor (MBBR). To perform simulations, the mathematical models of both processes were designed. The models were calibrated based on data from ASP and MBBR pilot plants operating in parallel on the existing plant. Only two kinetic parameters needed to be adjusted to represent the real plant behaviour. Steady-state analyses have shown a similar efficiency of both processes in relation to carbon removal, but improved performance of MBBR in relation to nitrogen removal. Better performance of MBBR can be expected especially at low temperatures. Simulations have not confirmed the expected less volume required for the MBBR process. Finally, the MBBR was chosen for plant upgrading. The developed process model will be further used to evaluate the final plant configuration and to optimise the plant operating parameters.

  16. A simulation study on garment manufacturing process

    Science.gov (United States)

    Liong, Choong-Yeun; Rahim, Nur Azreen Abdul

    2015-02-01

    Garment industry is an important industry and continues to evolve in order to meet the consumers' high demands. Therefore, elements of innovation and improvement are important. In this work, research studies were conducted at a local company in order to model the sewing process of clothes manufacturing by using simulation modeling. Clothes manufacturing at the company involves 14 main processes, which are connecting the pattern, center sewing and side neating, pockets sewing, backside-sewing, attaching the front and back, sleeves preparation, attaching the sleeves and over lock, collar preparation, collar sewing, bottomedge sewing, buttonholing sewing, removing excess thread, marking button, and button cross sewing. Those fourteen processes are operated by six tailors only. The last four sets of processes are done by a single tailor. Data collection was conducted by on site observation and the probability distribution of processing time for each of the processes is determined by using @Risk's Bestfit. Then a simulation model is developed using Arena Software based on the data collected. Animated simulation model is developed in order to facilitate understanding and verifying that the model represents the actual system. With such model, what if analysis and different scenarios of operations can be experimented with virtually. The animation and improvement models will be presented in further work.

  17. Simulation study of China's net primary production

    Institute of Scientific and Technical Information of China (English)

    GAO ZhiQiang; LIU JiYuan

    2008-01-01

    Spatial and temporal distribution of vegetation net primary production (NPP) in China was studied us-ing three light-use efficiency models (CASA, GLOPEM and GEOLUE) and two mechanistic ecological process models (CEVSA, GEOPRO). Based on spatial and temporal analysis (e.g. monthly, seasonally and annually) of simulated results from ecological process mechanism models of CASA, GLOPEM and CEVSA, the following conclusions could be made: (1) during the last 20 years, NPP change in China followed closely the seasonal change of climate affected by monsoon with an overall trend of increas-ing; (2) simulated average seasonal NPP was: 0.571±0.2 GtC in spring, 1.573±0.4 GtC in summer, 0.6±0.2 GtC in autumn, and 0.12±0.1 GtC in winter. Average annual NPP in China was 2.864±1 GtC. All the five models were able to simulate seasonal and spatial features of biomass for different ecological types in China. This paper provides a baseline for China's total biomass production. It also offers a means of estimating the NPP change due to afforestation, reforestation, conservation and other human activities and could aid people in using for-mentioned carbon sinks to fulfill China's commitment of reducing greenhouse gases.

  18. OpenSimulator Interoperability with DRDC Simulation Tools: Compatibility Study

    Science.gov (United States)

    2014-09-01

    conversion. iv These tools include Blender, AutoCAD , 3DS Max and SketchUp. Thus, DRDC use case (1) was demonstrated as feasible. However...supplementary support for the creation of content and resources compatible with OpenSimulator. These include programs such as Blender, GIMP, AutoCAD , 3DS MAX...support the PDS, PDMS, ACIS (.sat), MicroStation (.dgn), and AutoCAD (.dwg) formats, but not COLLADA directly [14]. An important limitation of

  19. DWPF simulant CPC studies for SB8

    Energy Technology Data Exchange (ETDEWEB)

    Koopman, D. C.; Zamecnik, J. R.

    2013-06-25

    The Savannah River National Laboratory (SRNL) accepted a technical task request (TTR) from Waste Solidification Engineering to perform simulant tests to support the qualification of Sludge Batch 8 (SB8) and to develop the flowsheet for SB8 in the Defense Waste Processing Facility (DWPF). These efforts pertained to the DWPF Chemical Process Cell (CPC). Separate studies were conducted for frit development and glass properties (including REDOX). The SRNL CPC effort had two primary phases divided by the decision to drop Tank 12 from the SB8 constituents. This report focuses on the second phase with SB8 compositions that do not contain the Tank 12 piece. A separate report will document the initial phase of SB8 testing that included Tank 12. The second phase of SB8 studies consisted of two sets of CPC studies. The first study involved CPC testing of an SB8 simulant for Tank 51 to support the CPC demonstration of the washed Tank 51 qualification sample in the SRNL Shielded Cells facility. SB8-Tank 51 was a high iron-low aluminum waste with fairly high mercury and moderate noble metal concentrations. Tank 51 was ultimately washed to about 1.5 M sodium which is the highest wash endpoint since SB3-Tank 51. This study included three simulations of the DWPF Sludge Receipt and Adjustment Tank (SRAT) cycle and Slurry Mix Evaporator (SME) cycle with the sludge-only flowsheet at nominal DWPF processing conditions and three different acid stoichiometries. These runs produced a set of recommendations that were used to guide the successful SRNL qualification SRAT/SME demonstration with actual Tank 51 washed waste. The second study involved five SRAT/SME runs with SB8-Tank 40 simulant. Four of the runs were designed to define the acid requirements for sludge-only processing in DWPF with respect to nitrite destruction and hydrogen generation. The fifth run was an intermediate acid stoichiometry demonstration of the coupled flowsheet for SB8. These runs produced a set of processing

  20. Simulation study of plane motion of air cushion vehicle

    Institute of Scientific and Technical Information of China (English)

    ZHAO Shu-qin; SHI Xiao-cheng; SHI Yi-long; BIAN Xin-qian

    2003-01-01

    This research is on horizontal plane motion equations of Air Cushion Vehicle (ACV) and its simulation. To investigate this, a lot of simulation study including ACV's voyage and turning performance has been done. It was found that the voyage simulation results were accorded with ACV own characteristic and turning simulation results were accorded with USA ACV's movement characteristic basically.

  1. Simulation study of plane motion of air cushion vehicle

    Science.gov (United States)

    Zhao, Shu-Qin; Shi, Xiao-Cheng; Shi, Yi-Long; Bian, Xin-Qian

    2003-12-01

    This research is on horizontal plane motion equations of Air Cushion Vehicle (ACV) and its simulation. To investigate this, a lot of simulation study including ACV’s voyage and turning performance has been done. It was found that the voyage simulation results were accorded with ACV own characteristic and turning simulation results were accorded with USA ACV’s movement characteristic basically.

  2. GESDB: a platform of simulation resources for genetic epidemiology studies.

    Science.gov (United States)

    Yao, Po-Ju; Chung, Ren-Hua

    2016-01-01

    Computer simulations are routinely conducted to evaluate new statistical methods, to compare the properties among different methods, and to mimic the observed data in genetic epidemiology studies. Conducting simulation studies can become a complicated task as several challenges can occur, such as the selection of an appropriate simulation tool and the specification of parameters in the simulation model. Although abundant simulated data have been generated for human genetic research, currently there is no public database designed specifically as a repository for these simulated data. With the lack of such a database, for similar studies, similar simulations may have been repeated, which resulted in redundant work. Thus, we created an online platform, the Genetic Epidemiology Simulation Database (GESDB), for simulation data sharing and discussion of simulation techniques for genetic epidemiology studies. GESDB consists of a database for storing simulation scripts, simulated data and documentation from published articles as well as a discussion forum, which provides a platform for discussion of the simulated data and exchanging simulation ideas. Moreover, summary statistics such as the simulation tools that are most commonly used and datasets that are most frequently downloaded are provided. The statistics will be informative for researchers to choose an appropriate simulation tool or select a common dataset for method comparisons. GESDB can be accessed at http://gesdb.nhri.org.twDatabase URL: http://gesdb.nhri.org.tw.

  3. Osmosis : a molecular dynamics computer simulation study

    Science.gov (United States)

    Lion, Thomas

    Osmosis is a phenomenon of critical importance in a variety of processes ranging from the transport of ions across cell membranes and the regulation of blood salt levels by the kidneys to the desalination of water and the production of clean energy using potential osmotic power plants. However, despite its importance and over one hundred years of study, there is an ongoing confusion concerning the nature of the microscopic dynamics of the solvent particles in their transfer across the membrane. In this thesis the microscopic dynamical processes underlying osmotic pressure and concentration gradients are investigated using molecular dynamics (MD) simulations. I first present a new derivation for the local pressure that can be used for determining osmotic pressure gradients. Using this result, the steady-state osmotic pressure is studied in a minimal model for an osmotic system and the steady-state density gradients are explained using a simple mechanistic hopping model for the solvent particles. The simulation setup is then modified, allowing us to explore the timescales involved in the relaxation dynamics of the system in the period preceding the steady state. Further consideration is also given to the relative roles of diffusive and non-diffusive solvent transport in this period. Finally, in a novel modification to the classic osmosis experiment, the solute particles are driven out-of-equilibrium by the input of energy. The effect of this modification on the osmotic pressure and the osmotic ow is studied and we find that active solute particles can cause reverse osmosis to occur. The possibility of defining a new "osmotic effective temperature" is also considered and compared to the results of diffusive and kinetic temperatures..

  4. Assessment of a simulation software for scintillation detector

    CERN Document Server

    Crespin, S; Brette, P; Falvard, A; Maublant, J

    2004-01-01

    Aim: A Monte Carlo code based on GEANT 3.21 and Linux platform has been developed and adaptated to simulate gamma detectors dedicated to specific scintigraphic applications. Materials and methods: GEANT 3.21 is freely available at the CERN program library. It has been written for simulating the interactions of particles with energy greater than 10keV. The energy of the gamma rays used in scintigraphic imaging never exceeds 511keV. Interaction cross- sections for energies between 10keV and 10MeV and three media of interest obtained with this program have been compared with data available on the NIST web site. A gamma peroperative hand-held probe has then been simulated. Sensitivity and spatial resolution were evaluated. Results: The high standard deviation for total attenuation coefficient is 4.7% with an uncertainty around 4% given by NIST. The good results obtained have allowed us to go farther in computer programming. In the hope of integrating all the detection lines new routines have been introduced for t...

  5. Nonlinear Simulation Studies of Tokamaks and STs

    Energy Technology Data Exchange (ETDEWEB)

    W. Park; J. Breslau; J. Chen; G.Y. Fu; S.C. Jardin; S. Klasky; J. Menard; A. Pletzer; B.C. Stratton; D. Stutman; H.R. Strauss; L.E. Sugiyama

    2003-07-07

    The multilevel physics, massively parallel plasma simulation code, M3D, has been used to study spherical tori (STs) and tokamaks. The magnitude of outboard shift of density profiles relative to electron temperature profiles seen in NSTX [National Spherical Torus Experiment] under strong toroidal flow is explained. Internal reconnection events in ST discharges can be classified depending on the crash mechanism, just as in tokamak discharges; a sawtooth crash, disruption due to stochasticity, or high-beta disruption. Toroidal shear flow can reduce linear growth of internal kink. It has a strong stabilizing effect nonlinearly and causes mode saturation if its profile is maintained, e.g., through a fast momentum source. Normally, however, the flow profile itself flattens during the reconnection process, allowing a complete reconnection to occur. In some cases, the maximum density and pressure spontaneously occur inside the island and cause mode saturation. Gyrokinetic hot particle/MHD hybrid studies of NSTX show the effects of fluid compression on a fast-ion-driven n = 1 mode. MHD studies of recent tokamak experiments with a central current hole indicate that the current clamping is due to sawtooth-like crashes, but with n = 0.

  6. SIMULATION STUDY ON AIRBORNE SAR ECHO SIGNAL

    Institute of Scientific and Technical Information of China (English)

    Bao Houbing; Liu Zhao

    2004-01-01

    Through analyzing the influence on echo signal by factors of kinematical parameters of airborne SAR platform and radar antenna direction, this letter, on the basis of classical SAR echo signal analogue algorithm, puts forward certain airborne SAR echo signal analogue algorithm of distance directional frequency domain pulse coherent accumulation, and goes through simulation. The simulation results have proved the effectiveness of this algorithm.

  7. Simulation Higher Order Language Requirements Study.

    Science.gov (United States)

    Goodenough, John B.; Braun, Christine L.

    The definitions provided for high order language (HOL) requirements for programming flight training simulators are based on the analysis of programs written for a variety of simulators. Examples drawn from these programs are used to justify the need for certain HOL capabilities. A description of the general structure and organization of the…

  8. Quench Simulation Studies: Program documentation of SPQR

    CERN Document Server

    Sonnemann, F

    2001-01-01

    Quench experiments are being performed on prototypes of the superconducting magnets and busbars to determine the adequate design and protection. Many tests can only be understood correctly with the help of quench simulations that model the thermo-hydraulic and electrodynamic processes during a quench. In some cases simulations are the only method to scale the experimental results of prototype measurements to match the situation of quenching superconducting elements in the LHC. This note introduces the theoretical quench model and the use of the simulation program SPQR (Simulation Program for Quench Research), which has been developed to compute the quench process in superconducting magnets and busbars. The model approximates the heat balance equation with the finite difference method including the temperature dependence of the material parameters. SPQR allows the simulation of longitudinal quench propagation along a superconducting cable, the transverse propagation between adjacent conductors, heat transfer i...

  9. Simulation study of pixel detector charge digitization

    Science.gov (United States)

    Wang, Fuyue; Nachman, Benjamin; Sciveres, Maurice; Lawrence Berkeley National Laboratory Team

    2017-01-01

    Reconstruction of tracks from nearly overlapping particles, called Tracking in Dense Environments (TIDE), is an increasingly important component of many physics analyses at the Large Hadron Collider as signatures involving highly boosted jets are investigated. TIDE makes use of the charge distribution inside a pixel cluster to resolve tracks that share one of more of their pixel detector hits. In practice, the pixel charge is discretized using the Time-over-Threshold (ToT) technique. More charge information is better for discrimination, but more challenging for designing and operating the detector. A model of the silicon pixels has been developed in order to study the impact of the precision of the digitized charge distribution on distinguishing multi-particle clusters. The output of the GEANT4-based simulation is used to train neutral networks that predict the multiplicity and location of particles depositing energy inside one cluster of pixels. By studying the multi-particle cluster identification efficiency and position resolution, we quantify the trade-off between the number of ToT bits and low-level tracking inputs. As both ATLAS and CMS are designing upgraded detectors, this work provides guidance for the pixel module designs to meet TIDE needs. Work funded by the China Scholarship Council and the Office of High Energy Physics of the U.S. Department of Energy under contract DE-AC02-05CH11231.

  10. Magnetic Nozzle Simulation Studies for Electric Propulsion

    Science.gov (United States)

    Tarditi, Alfonso

    2010-11-01

    Electric Propulsion has recently re-gained interest as one of the key technologies to enable NASA's long-range space missions. Options are being considered also in the field of aneutronic fusion propulsion for high-power electric thrusters. To support these goals the study of the exhaust jet in a plasma thruster acquires a critical importance because the need of high-efficiency generation of thrust. A model of the plasma exhaust has been developed with the 3D magneto-fluid NIMROD code [1] to study the physics of the plasma detachment in correlation with experimentally relevant configurations. The simulations show the role of the plasma diamagnetism and of the magnetic reconnection process in the formation of a detached plasma. Furthermore, in direct fusion-propulsion concepts high-energy (MeV range) fusion products have to be efficiently converted into a slower and denser plasma jet (with specific impulse down to few 1000's seconds, for realistic missions in the Solar System). For this purpose, a two-stage conversion process is being modeled where high-energy ions are non-adiabatically injected and confined into a magnetic duct leading to the magnetic nozzle, transferring most of their energy into their gyro-motion and drifting at slower speed along with the plasma propellant. The propellant acquires then thermal energy that gets converted into the direction of thrust by the magnetic nozzle. [1] C. R. Sovinec et al., J. Comput. Phys. 195, 355 (2004).

  11. Simulation study of the high intensity S-Band photoinjector

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, Xiongwei; Nakajima, Kazuhisa [High Energy Accelerator Research Organization, Tsukuba, Ibaraki (Japan)

    2001-10-01

    In this paper, we report the results of simulation study of the high intensity S-Band photoinjector. The aim of the simulation study is to transport high bunch charge with low emittance evolution. The simulation result shows that 7nC bunch with rms emittance 22.3 {pi} mm mrad can be outputted at the exit of photoinjector. (author)

  12. Practical studies on rockfall simulation by DDA

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    In this paper,simulations of real rockfall by discontinuous deformation analysis (DDA) are conducted.In the simulations,the energy losses of rockfall are categorized into three types,i.e.the loss by friction,the loss by collision,and the loss by vegetation.Modeling of the energy loss using absolute parameters is conducted by the DDA method.Moreover,in order to verify the applicability and validity of the proposed DDA,field tests on rockfall and corresponding simulations of rockfall tests by DDA are performe...

  13. Conducting Simulation Studies in the R Programming Environment.

    Science.gov (United States)

    Hallgren, Kevin A

    2013-10-12

    Simulation studies allow researchers to answer specific questions about data analysis, statistical power, and best-practices for obtaining accurate results in empirical research. Despite the benefits that simulation research can provide, many researchers are unfamiliar with available tools for conducting their own simulation studies. The use of simulation studies need not be restricted to researchers with advanced skills in statistics and computer programming, and such methods can be implemented by researchers with a variety of abilities and interests. The present paper provides an introduction to methods used for running simulation studies using the R statistical programming environment and is written for individuals with minimal experience running simulation studies or using R. The paper describes the rationale and benefits of using simulations and introduces R functions relevant for many simulation studies. Three examples illustrate different applications for simulation studies, including (a) the use of simulations to answer a novel question about statistical analysis, (b) the use of simulations to estimate statistical power, and (c) the use of simulations to obtain confidence intervals of parameter estimates through bootstrapping. Results and fully annotated syntax from these examples are provided.

  14. A Simulation Study of Paced TCP

    Science.gov (United States)

    Kulik, Joanna; Coulter, Robert; Rockwell, Dennis; Partridge, Craig

    2000-01-01

    In this paper, we study the performance of paced TCP, a modified version of TCP designed especially for high delay- bandwidth networks. In typical networks, TCP optimizes its send-rate by transmitting increasingly large bursts, or windows, of packets, one burst per round-trip time, until it reaches a maximum window-size, which corresponds to the full capacity of the network. In a network with a high delay-bandwidth product, however, Transmission Control Protocol's (TCPs) maximum window-size may be larger than the queue size of the intermediate routers, and routers will begin to drop packets as soon as the windows become too large for the router queues. The TCP sender then concludes that the bottleneck capacity of the network has been reached, and it limits its send-rate accordingly. Partridge proposed paced TCP as a means of solving the problem of queueing bottlenecks. A sender using paced TCP would release packets in multiple, small bursts during a round-trip time in which ordinary TCP would release a single, large burst of packets. This approach allows the sender to increase its send-rate to the maximum window size without encountering queueing bottlenecks. This paper describes the performance of paced TCP in a simulated network and discusses implementation details that can affect the performance of paced TCP.

  15. Simulation studies for multichannel active vibration control

    Science.gov (United States)

    Prakash, Shashikala; Balasubramaniam, R.; Praseetha, K. K.

    2003-10-01

    Traditional approach to vibration control uses passive techniques, which are relatively large, costly and ineffective at low frequencies. Active Vibration Control (AVC) is used to overcome these problems & in AVC additional sources (secondary) are used to cancel vibration from primary source based on the principle of superposition theorem Since the characteristics of the vibration source and environment are time varying, the AVC system must be adaptive. Adaptive systems have the ability to track time varying disturbances and provide optimal control over a much broader range of conditions than conventional fixed control systems. In multi channel AVC vibration fields in large dimensions are controlled & is more complicated. Therefore to actively control low frequency vibrations on large structures, multi channel AVC requires a control system that uses multiple secondary sources to control the vibration field simultaneously at multiple error sensor locations. The error criterion that can be directly measured is the sum of squares of outputs of number of sensors. The adaptive algorithm is designed to minimize this & the algorithm implemented is the "Multiple error LMS algorithm." The best known applications of multiple channel FXLMS algorithm is in real time AVC and system identification. More wider applications are in the control of propeller induced noise in flight cabin interiors. In the present paper the results of simulation studies carried out in MATLAB as well as on TMS320C32 DSP processor will be brought out for a two-channel case.

  16. Simulation studies of GST phase change alloys

    Science.gov (United States)

    Martyna, Glenn

    2008-03-01

    In order to help drive post-Moore's Law technology development, switching processes involving novel materials, in particular, GeSbTe (GST) alloys are being investigated for use in memory and eFuse applications. An anneal/quench thermal process crystallizes/amorphosizes a GST alloy which then has a low/high resistance and thereby forms a readable/writeable bit; for example, a ``one'' might be the low resistance, conducting crystalline state and a ``zero'' might be the high resistance, glassy state. There are many open questions about the precise nature of the structural transitions and the coupling to electronic structure changes. Computational and experimental studies of the effect of pressure on the GST materials were initiated in order to probe the physics behind the thermal switching process. A new pathway to reversible phase change involving pressure-induced structural metal insulator transitions was discovered. In a binary GS system, a room-temperature, direct, pressure-induced transformation from the high resistance amorphous phase to the low resistance crystalline phase was observed experimentally while the reverse process under tensile load was demonstrated via ab initio MD simulations performed on IBM's Blue Gene/L enabled by massively parallel software. Pressure induced transformations of the ternary material GST-225 (Ge2Sb2Te5) were, also, examined In the talk, the behavior of the two systems will be compared and insight into the nature of the phase change given.

  17. Aspects of simulation for rectification studies

    Science.gov (United States)

    Mikhail, E. M.; Paderes, F. D., Jr.

    1983-01-01

    The use of mathematical models and simulation is suggested as an aid to rectification. An outline of the factors affecting rectification accuracy is presented along with methods and approaches used for rectifications.

  18. Study Development of the Cardiac Computer Simulations

    Institute of Scientific and Technical Information of China (English)

    VOLKERHellemanns; ZHANGHong; SEKOUSingare; ZHANGZhen-xi; KONGXiang-yun

    2004-01-01

    The technique of computer simulations is a very efficient method in investigating mechanisms of many diseases. This paper reviews how the simulations of the human heart started as a simple mathematical models in the past and developed to the point where genetic information is needed to do suitable work like finding out new medicaments against heart diseases. Also the Influence of the development of computer performance in the future as well as the data presentation is described.

  19. Computer Simulation Studies in Condensed-Matter Physics XVII

    Science.gov (United States)

    Landau, D. P.; Lewis, S. P.; Schüttler, H.-B.

    This status report features the most recent developments in the field, spanning a wide range of topical areas in the computer simulation of condensed matter/materials physics. Both established and new topics are included, ranging from the statistical mechanics of classical magnetic spin models to electronic structure calculations, quantum simulations, and simulations of soft condensed matter. The book presents new physical results as well as novel methods of simulation and data analysis. Highlights of this volume include various aspects of non-equilibrium statistical mechanics, studies of properties of real materials using both classical model simulations and electronic structure calculations, and the use of computer simulations in teaching.

  20. Comparisons of the Electron and Muon Testbeam Response of the ATLAS Liquid Argon Calorimeters with GEANT4 Simulations

    CERN Document Server

    Benchekroun, D; Karapetian, G V; Kiryunin, A E; Kish, J; Kordas, K; Leltchouk, M; Loch, P; Mazini, R; Negroni, S; Parrour, G; Salihagic, D; Seligman, W; Soukharev, A M; Strízenec, P; Unal, G

    2004-01-01

    GEANT4, a new simulation toolkit, is now in use by the different sub-detectors which are currently being built and tested for the ATLAS experiment. The validation of the GEANT4 electromagnetic physics is done by comparing the response of the various modules of the ATLAS liquid argon calorimeters to electron and muon test beams to the results of GEANT4 simulations. Comparisons to the corresponding GEANT3 predictions has been done as well. This note presents the status of the work on this validation.

  1. Simulation framework and XML detector description for the CMS experiment

    CERN Document Server

    Arce, P; Boccali, T; Case, M; de Roeck, A; Lara, V; Liendl, M; Nikitenko, A N; Schröder, M; Strässner, A; Wellisch, H P; Wenzel, H

    2003-01-01

    Currently CMS event simulation is based on GEANT3 while the detector description is built from different sources for simulation and reconstruction. A new simulation framework based on GEANT4 is under development. A full description of the detector is available, and the tuning of the GEANT4 performance and the checking of the ability of the physics processes to describe the detector response is ongoing. Its integration on the CMS mass production system and GRID is also currently under development. The Detector Description Database project aims at providing a common source of information for Simulation, Reconstruction, Analysis, and Visualisation, while allowing for different representations as well as specific information for each application. A functional prototype, based on XML, is already released. Also examples of the integration of DDD in the GEANT4 simulation and in the reconstruction applications are provided.

  2. Conducting Simulation Studies in the R Programming Environment

    Directory of Open Access Journals (Sweden)

    Kevin A. Hallgren

    2013-10-01

    Full Text Available Simulation studies allow researchers to answer specific questions about data analysis, statistical power, and best-practices for obtainingaccurate results in empirical research. Despite the benefits that simulation research can provide, many researchers are unfamiliar with available tools for conducting their own simulation studies. The use of simulation studies need not be restricted toresearchers with advanced skills in statistics and computer programming, and such methods can be implemented by researchers with a variety of abilities and interests. The present paper provides an introduction to methods used for running simulationstudies using the R statistical programming environment and is written for individuals with minimal experience running simulation studies or using R. The paper describes the rationale and benefits of using simulations and introduces R functions relevant for many simulation studies. Three examples illustrate different applications for simulation studies, including (a the use of simulations to answer a novel question about statistical analysis, (b the use of simulations to estimate statistical power, and (c the use of simulations to obtain confidence intervals of parameter estimates throughbootstrapping. Results and fully annotated syntax from these examples are provided.

  3. Broadcasting simulation case studies to the didactic classroom.

    Science.gov (United States)

    Kalmakis, Karen A; Cunningham, Helene; Lamoureux, Erin T; Ahmed, Elshaymaa M

    2010-01-01

    To explore the potential of using simulation in new ways, it is time to think "outside the lab." To do this, the authors expanded the use of case-study simulations by broadcasting them to classrooms where didactic content could be reinforced with simulation content. Advantages included students' active classroom engagement, simultaneously sharing simulations with many students, modeling students' thinking in clinical situations, and connecting theory to practice.

  4. A simulation tool for brassiness studies.

    Science.gov (United States)

    Gilbert, Joël; Menguy, Ludovic; Campbell, Murray

    2008-04-01

    A frequency-domain numerical model of brass instrument sound production is proposed as a tool to predict their brassiness, defined as the rate of spectral enrichment with increasing dynamic level. It is based on generalized Burger's equations dedicated to weakly nonlinear wave propagation in nonuniform ducts, and is an extension of previous work by Menguy and Gilbert [Acta Acustica 86, 798-810 (2000)], initially limited to short cylindrical tubes. The relevance of the present tool is evaluated by carrying out simulations over distances longer than typical shock formation distances, and by doing preliminary simulations of periodic regimes in a typical brass trombone bore geometry.

  5. Hemispherical sky simulator for daylighting model studies

    Energy Technology Data Exchange (ETDEWEB)

    Selkowitz, S.

    1981-07-01

    The design of a 24-foot-diameter hemispherical sky simulator recently completed at LBL is described. The goal was to produce a facility in which large models could be tested; which was suitable for research, teaching, and design; which could provide a uniform sky, an overcast sky, and several clear-sky luminance distributions, as well as accommodating an artificial sun. Initial operating experience with the facility is described, the sky simulator capabilities are reviewed, and its strengths and weaknesses relative to outdoor modeling tests are discussed.

  6. Effect of the electron transport through thin slabs on the simulation of linear electron accelerators of use in therapy: A comparative study of various Monte Carlo codes

    Energy Technology Data Exchange (ETDEWEB)

    Vilches, M. [Servicio de Fisica y Proteccion Radiologica, Hospital Regional Universitario ' Virgen de las Nieves' , Avda. de las Fuerzas Armadas, 2, E-18014 Granada (Spain)], E-mail: mvilches@ugr.es; Garcia-Pareja, S. [Servicio de Radiofisica Hospitalaria, Hospital Regional Universitario ' Carlos Haya' , Avda. Carlos Haya, s/n, E-29010 Malaga (Spain); Guerrero, R. [Servicio de Radiofisica, Hospital Universitario ' San Cecilio' , Avda. Dr. Oloriz, 16, E-18012 Granada (Spain); Anguiano, M.; Lallena, A.M. [Departamento de Fisica Atomica, Molecular y Nuclear, Universidad de Granada, E-18071 Granada (Spain)

    2007-09-21

    When a therapeutic electron linear accelerator is simulated using a Monte Carlo (MC) code, the tuning of the initial spectra and the renormalization of dose (e.g., to maximum axial dose) constitute a common practice. As a result, very similar depth dose curves are obtained for different MC codes. However, if renormalization is turned off, the results obtained with the various codes disagree noticeably. The aim of this work is to investigate in detail the reasons of this disagreement. We have found that the observed differences are due to non-negligible differences in the angular scattering of the electron beam in very thin slabs of dense material (primary foil) and thick slabs of very low density material (air). To gain insight, the effects of the angular scattering models considered in various MC codes on the dose distribution in a water phantom are discussed using very simple geometrical configurations for the LINAC. The MC codes PENELOPE 2003, PENELOPE 2005, GEANT4, GEANT3, EGSnrc and MCNPX have been used.

  7. Studying Scientific Discovery by Computer Simulation.

    Science.gov (United States)

    1983-03-30

    scientific laws that were induced from data before any theory was available to discover the regularities. To the previous examples, we could add Gregor ...discoveries (excluding those of Mendel and Mendeleev, which we have not simulated) could have been made. The Role of Theory in Law Induction BACON’s

  8. Simulation study of passive target motion analysis

    Institute of Scientific and Technical Information of China (English)

    HU Youfeng; JIAO Binli

    2003-01-01

    In this paper, the problem of underwater passive target motion analysis (TMA) in three dimensions is discussed using the measurements of passive bearings and elevation and frequency on the condition that acoustic source and observer are in different horizontal planes. Simulation results with both of the PLE (pseudo-linear estimation) and MLE (Maximum likelihood estimation) show that the TMA method is effective in oceanic environment. Its error covariance curves tend to its Cramer-Rao lower bounds.

  9. Simulation study on combustion of biomass

    Science.gov (United States)

    Zhao, M. L.; Liu, X.; Cheng, J. W.; Liu, Y.; Jin, Y. A.

    2017-01-01

    Biomass combustion is the most common energy conversion technology, offering the advantages of low cost, low risk and high efficiency. In this paper, the transformation and transfer of biomass in the process of combustion are discussed in detail. The process of furnace combustion and gas phase formation was analyzed by numerical simulation. The experimental results not only help to optimize boiler operation and realize the efficient combustion of biomass, but also provide theoretical basis for the improvement of burner technology.

  10. An interface for GEANT4 simulation using ROOT geometry navigation

    CERN Document Server

    Gheata, A

    2008-01-01

    The ROOT geometry modeller (TGeo) offers powerful tools for detector geometry description. The package provides several functionalities like: navigation, geometry checking, enhanced visualization, geometry editing GUI and many others, using ROOT I/O. A new interface module g4root was recently developed to take advantage of ROOT geometry navigation optimizations in the context of GEANT4 simulation. The interface can be used either by native GEANT4-based simulation applications or in the more general context of the Virtual Monte Carlo (VMC) framework developed by ALICE offline and ROOT teams. The latter allows running GEANT3, GEANT4 and FLUKA simulations without changing either the geometry description or the user code. The interface was tested and stressed in the context of ALICE simulation framework. A description of the interface, its usage as well as recent results in terms of reliability and performance will be presented. Some benchmarks will be compared for ROOT-TGeo or GEANT4 based navigation.

  11. A Training Transfer Study of Simulation Games

    Science.gov (United States)

    2010-03-01

    protagonist, Ender , was a 12-year-old boy who played video games well. He did so well, in fact, that the government sent him to Battle School for... Ender made a risky move in the game and consequently won the day. Exhausted, he left the simulator to find out the secret of the game and of Battle...the Third Invasion. There were no games , the battles were real, and the only enemy you fought was the buggers. (p. 296) Ender , in fact, had been

  12. A simulation based engineering method to support HAZOP studies

    DEFF Research Database (Denmark)

    Enemark-Rasmussen, Rasmus; Cameron, David; Angelo, Per Bagge

    2012-01-01

    HAZOP is the most commonly used process hazard analysis tool in industry, a systematic yet tedious and time consuming method. The aim of this study is to explore the feasibility of process dynamic simulations to facilitate the HAZOP studies. We propose a simulation-based methodology to complement...

  13. Simulation study of the plasma brake effect

    CERN Document Server

    Janhunen, Pekka

    2014-01-01

    The plasma brake is a thin negatively biased tether which has been proposed as an efficient concept for deorbiting satellites and debris objects from low Earth orbit. We simulate the interaction with the ionospheric plasma ram flow with the plasma brake tether by a high performance electrostatic particle in cell code to evaluate the thrust. The tether is assumed to be perpendicular to the flow. We perform runs for different tether voltage, magnetic field orientation and plasma ion mass. We show that a simple analytical thrust formula reproduces most of the simulation results well. The interaction with the tether and the plasma flow is laminar when the magnetic field is perpendicular to the tether and the flow. If the magnetic field is parallel to the tether, the behaviour is unstable and thrust is reduced by a modest factor. The case when the magnetic field is aligned with the flow can also be unstable, but does not result in notable thrust reduction. We also fix an error in an earlier reference. According to...

  14. A Simulation Study on A Diesel Engine Assembly Line

    Institute of Scientific and Technical Information of China (English)

    刘庆华; 吴桂花

    2002-01-01

    Nowadays in China, as the economic reform goes further and the central government increasingly demands for raising productivity, more and more state-owned factories begin to turn their heads back to problems arising from their production systems. With the co-operation of Tianjin Diesel Engine Factory, we conducted a simulation study on its diesel engine assembly line, using GPSS as our major simulation language tool. This paper describes the model we constructed, simulation experiments we made on the model, and some conclusions we drew from the simulation study.

  15. A general semi-analytic method to simulate discrete bremsstrahlung at very low radiated photon energies by the Monte Carlo method

    CERN Document Server

    Sona, P; Mangiarotti, A; Uggerhoj, U I

    2011-01-01

    A computer code for Monte-Carlo simulations in the framework of the GEANT 3 toolkit has been implemented for the description of the discrete bremsstrahlung radiation from high energy electrons crossing thick (semi-infinite) targets. The code is based on the Migdal theory which includes the LPM and dielectric suppression. Validation of the code has been performed by a comparison with the data from the SLAC E-146 experiment. The agreement between simulations and experimental data is generally very good. (C) 2011 Elsevier B.V. All rights reserved.

  16. Simulation

    CERN Document Server

    Ross, Sheldon

    2006-01-01

    Ross's Simulation, Fourth Edition introduces aspiring and practicing actuaries, engineers, computer scientists and others to the practical aspects of constructing computerized simulation studies to analyze and interpret real phenomena. Readers learn to apply results of these analyses to problems in a wide variety of fields to obtain effective, accurate solutions and make predictions about future outcomes. This text explains how a computer can be used to generate random numbers, and how to use these random numbers to generate the behavior of a stochastic model over time. It presents the statist

  17. Simulation Use in Paramedic Education Research (SUPER): A Descriptive Study.

    Science.gov (United States)

    McKenna, Kim D; Carhart, Elliot; Bercher, Daniel; Spain, Andrew; Todaro, John; Freel, Joann

    2015-01-01

    The purpose of this research was to characterize the use of simulation in initial paramedic education programs in order assist stakeholders' efforts to target educational initiatives and resources. This group sought to provide a snapshot of what simulation resources programs have or have access to and how they are used; faculty perceptions about simulation; whether program characteristics, resources, or faculty training influence simulation use; and if simulation resources are uniform for patients of all ages. This was a cross-sectional census survey of paramedic programs that were accredited or had a Letter of Review from the Committee on Accreditation of Educational Programs for the EMS Professions at the time of the study. The data were analyzed using descriptive statistics and chi-square analyses. Of the 638 surveys sent, 389 valid responses (61%) were analyzed. Paramedic programs reported they have or have access to a wide range of simulation resources (task trainers [100%], simple manikins [100%], intermediate manikins [99%], advanced/fully programmable manikins [91%], live simulated patients [83%], computer-based [71%], and virtual reality [19%]); however, they do not consistently use them, particularly advanced (71%), live simulated patients (66%), computer-based (games, scenarios) (31%), and virtual reality (4%). Simulation equipment (of any type) reportedly sits idle and unused in (31%) of programs. Lack of training was cited as the most common reason. Personnel support specific to simulation was available in 44% of programs. Programs reported using simulation to replace skills more frequently than to replace field or clinical hours. Simulation goals included assessment, critical thinking, and problem-solving most frequently, and patient and crew safety least often. Programs using advanced manikins report manufacturers as their primary means of training (87%) and that 19% of faculty had no training specific to those manikins. Many (78%) respondents felt

  18. Study on the random simulation times of mining engineering reliability

    Institute of Scientific and Technical Information of China (English)

    BI Zhong-wei; DING De-xin; ZHANG Xin-hua

    2005-01-01

    The theory of Monte-Carlo simulation method is that the event happened probability was estimated by happened frequency in the experiments. So it is very important to ascertain the times of simulation. The probability and statistic theory are used to determine the optimal simulation times through strict mathematic reasoning. The study of two cases is made to show the availability of the presented method, and some relative problems were discussed.

  19. A Theoretical Study of Subsurface Drainage Model Simulation of ...

    African Journals Online (AJOL)

    A Theoretical Study of Subsurface Drainage Model Simulation of Drainage Flow and ... of subsurface drain spacing, evapotranspiration and irrigation water quality on ... The study was carried out on a conceptual uniform homogenous irrigated ...

  20. A simulation based engineering method to support HAZOP studies

    DEFF Research Database (Denmark)

    Enemark-Rasmussen, Rasmus; Cameron, David; Angelo, Per Bagge

    2012-01-01

    HAZOP is the most commonly used process hazard analysis tool in industry, a systematic yet tedious and time consuming method. The aim of this study is to explore the feasibility of process dynamic simulations to facilitate the HAZOP studies. We propose a simulation-based methodology to complement...... the conventional HAZOP procedure. The method systematically generates failure scenarios by considering process equipment deviations with pre-defined failure modes. The effect of failure scenarios is then evaluated using dynamic simulations -in this study the K-Spice® software used. The consequences of each failure...... model as case study....

  1. Feasibility study of measuring CP symmetry violation via eta->4pi decay using WASA-at-COSY detector

    CERN Document Server

    Bednarski, Tomasz

    2011-01-01

    It is known that the Standard Model does not describe all phenomena related to subatomic particles. This thesis presents feasibility studies of the measurement of eta meson decay using WASA-at-COSY detector which tests predictions of the Standard Model. The aim of this thesis is to estimate the time of measurement for which the current branching ratio limit of eta -> 4pi0 decay can be improved. In order to estimate the time of measurement Monte Carlo simulations were performed. Kinematics of the pp -> ppeta -> pp4pi0 -> pp8gamma reactions were simulated using PLUTO program. Next, by means of the GEANT3 program the response of the WASA-at-COSY detector was simulated for each particle. Received signals were analysed in RootSorter software package based on ROOT. Studies of the reaction with many gamma quanta in the exit channel required the investigation of WASA-at-COSY calorimeter functioning. Tests of a cluster building algorithm with emphasis on merging and splitting of detected signals were done. The obtaine...

  2. Computer simulation studies of pulsed Doppler signals from vortices

    Institute of Scientific and Technical Information of China (English)

    CHEN Sizhong; WANG Yuanyuan; WANG Weiqi

    2001-01-01

    A computer simulation method for pulsed Doppler signals from vortices was proposed to generate simulated vortex Doppler signals under various given circumstances. The relative waveforms, such as the maximum frequency waveform, the mean frequency waveform and the bandwidth waveform, were obtained using the short time Fourier analysis of those simulated signals. The relations were studied between several spectrum parameters obtained from these waveforms and given simulation conditions, such as the position and the size of the sample volume, the distance between two vortices, the free stream velocity and the maximum tangent velocity of the vortex. The sensitive parameters were found to detect vortices using the pulsed Doppler techniques.

  3. Nuclear wasteform materials: Atomistic simulation case studies

    Energy Technology Data Exchange (ETDEWEB)

    Chroneos, A., E-mail: alex.chroneos@open.ac.uk [Materials Engineering, The Open University, Milton Keynes MK7 6AA (United Kingdom); Department of Materials, Imperial College London, London SW7 2AZ (United Kingdom); Institute of Materials Science, NCSR Demokritos, GR-15310 Athens (Greece); Rushton, M.J.D. [Department of Materials, Imperial College London, London SW7 2AZ (United Kingdom); Jiang, C. [State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083 (China); Tsoukalas, L.H. [Department of Nuclear Engineering, Purdue University, West Lafayette, IN 47907 (United States)

    2013-10-15

    Ever increasing global energy demand combined with a requirement to reduce CO{sub 2} emissions has rekindled an interest in nuclear power generation. In order that nuclear energy remains publicly acceptable and therefore a sustainable source of power it is important that nuclear waste is dealt with in a responsible manner. To achieve this, improved materials for the long-term immobilisation of waste should be developed. The extreme conditions experienced by nuclear wasteforms necessitate the detailed understanding of their properties and the mechanisms acting within them at the atomic scale. This latter issue is the focus of the present review. Atomic scale simulation techniques can accelerate the development of new materials for nuclear wasteform applications and provide detailed information on their physical properties that cannot be easily accessed by experiment. The present article introduces examples of how atomic scale, computational modelling techniques have led to an improved understanding of current nuclear wasteform materials and also suggest how they may be used in the development of new wasteforms.

  4. Simulation study of silicon and gaseous tracking detectors

    CERN Document Server

    Beaumont, W; De Lentdecker, G; Devroede, O; Doninck, W V; Dyck, C V; Udo, Fred; Van Velde, C; Vanlaer, P; Verbeure, F; Zhukov, V

    2002-01-01

    The performance of microstrip gaseous counters (MSGC, MSGC + GEM) and silicon microstrip sensors has been studied in view of their use in high luminosity tracking applications. Simulations of signal development in the detectors and subsequent signal treatment in the readout electronics were performed. The simulation results are compared with experimental data obtained in test beams.

  5. What Every Social Studies Teacher Should Know about Simulations

    Science.gov (United States)

    Wright-Maley, Cory

    2015-01-01

    Simulations are of growing interest within the social studies in terms of research and practice. Although the findings of early research were unfavorable to simulations in terms of student learning, recent research has revealed new and interesting findings related to different domains of student learning that earlier research did not. In light of…

  6. Simulations

    CERN Document Server

    Ngada, N M

    2015-01-01

    The complexity and cost of building and running high-power electrical systems make the use of simulations unavoidable. The simulations available today provide great understanding about how systems really operate. This paper helps the reader to gain an insight into simulation in the field of power converters for particle accelerators. Starting with the definition and basic principles of simulation, two simulation types, as well as their leading tools, are presented: analog and numerical simulations. Some practical applications of each simulation type are also considered. The final conclusion then summarizes the main important items to keep in mind before opting for a simulation tool or before performing a simulation.

  7. Traffic monitoring using handheld GSM phones. Part B: Simulation study

    NARCIS (Netherlands)

    Catalano, S.; Van der Zijpp, N.J.

    2002-01-01

    Revised version of LVV rapport, VK 2001.004. This report contains the description of a novel map-matching algorithm, and the results of a simulation study into the feasibility of traffic monitoring using handheld mobile phones.

  8. Development of a framework for optimization of reservoir simulation studies

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Jiang; Delshad, Mojdeh; Sepehrnoori, Kamy [The University of Texas at Austin, Austin, TX (United States)

    2007-10-15

    We have developed a framework that distributes multiple reservoir simulations on a cluster of CPUs for fast and efficient process optimization studies. This platform utilizes several commercial reservoir simulators for flow simulations, an experimental design and a Monte Carlo algorithm with a global optimization search engine to identify the optimum combination of reservoir decision factors under uncertainty. This approach is applied to a well placement design for a field-scale development exercise. The uncertainties considered are in the fault structure, porosity and permeability, PVT, and relative permeabilities. The results indicate that the approach is practical and efficient for performing reservoir optimization studies. (author)

  9. Monte Carlo simulation of the Varian Clinac 600C accelerator dynamic and physical wedges

    Energy Technology Data Exchange (ETDEWEB)

    Soares, S [Universidade da Beira Interior, Av. Marques d' Avila e Bolama, Covilha 6201-001 (Portugal); Chaves, A [Instituto Portugues de Oncologia Doutor Francisco Gentil (IPO), Av. Bissaya Barreto, Coimbra 3000-075 (Portugal); Peralta, L [Laboratorio de Instrumentacao e Fisica Experimental de PartIculas (LIP), Av. Elias Garcia no14 1o, Lisbon 1000-149 (Portugal); Lopes, Mc [Faculdade de Ciencias da Universidade de Lisboa, Campo Grande EdifIcio C5, Lisbon 1149-016 (Portugal)

    2007-06-15

    The present paper describes the study done on the dosimetric characteristics of the Varian Clinac 600C dynamic wedges (DW) and their comparison with the physical wedges (PW) in terms of the differences affecting the dose distributions, beam spectra, energy fluence and angular distributions. The geometry of the 4 MV photon beam and the dose distributions in a water phantom were simulated with GEANT3 and DPM Monte Carlo code systems. The DW was modelled through the constant movement of the upper jaws. The depth dose distributions and lateral profiles for the DW, PW and open fields were measured and compared with the Monte Carlo simulations and the global agreement was found to be within 3%. It was also found that the effects of a DW on beam spectral and angular distributions are much less significant than those produced by a PW. For example, in our study we found out that the 45{sup 0}PW, when compared with the corresponding open field, can introduce a 30% increase in the mean photon energy due to the beam hardening effect and that it can also introduce a 4.5% dose reduction in the build-up region because of the reduction of the contaminated electrons by the PW. For the DW neither this mean-energy increase nor such dose reduction was found. The PW, when compared to the DW, significantly alters the photon-beam spectrum and these dosimetric differences are significant and further investigation must be performed to quantify the impact in clinical use of these beams.

  10. Simulation and Study of High Workload Operations

    Science.gov (United States)

    1974-04-25

    androstenedione and dehydroepicndrosteroiie ( DHEA ) do not significantly interfere with the assay. Since there are only ninute quantities of free corticosterone...These" factors Interact with each other and with learning and memory In a complex mar.,ier to influence not only the direction but the degree of...9). Long term memory or experience is a potent modifier of biochemical response as is illustrated by Kramer’s study of an 18 hour flight ir

  11. Experimental study and simulation of airflow in solar chimneys

    Energy Technology Data Exchange (ETDEWEB)

    Saifi, Nadia; Dokkar, Boubekeur; Negrou, Belkhir; Settou, Noureddine [Laboratory for Bioressources Saharan Preservation and Enhancement, University of Kasdi Merbah (Algeria)], e-mail: saifi.nadia2009@gmail.com

    2011-07-01

    With the depletion of traditional energies, new technologies are arising that use renewable energies. The aim of this paper is to present a study of airflow in solar chimneys. Mathematical simulation and experiments were carried out on solar chimneys with different geometries. It was found that the width of the channel and the angle of inclination of the chimney influence the field speed. A case study was then carried out on a solar chimney in Ouargla Province, Algeria, to assess the impact of a chimney's inclination on its performance. The simulation was conducted using a finite volume method in Fluent 6.3.26 computer software. A good match between experimental and simulation results was found. This paper presented a study on airflow in solar chimney and demonstrated that simulations using Fluent and the finite element method were able to provide good results.

  12. Simulated equilibrium factor studies in radon chamber

    Energy Technology Data Exchange (ETDEWEB)

    Tiehchi Chu; Holing Liu [National Tsing Hua Univ., Hsinchu, Taiwan (China). Dept. of Nuclear Science

    1996-05-01

    A series of experiments have been conducted to study the influences of environmental parameters on the equilibrium factor. Most of them were carried out in a walk-in type chamber. The deposition velocity was calculated using the Jacobi model. The ranges of the environmental parameters studied in the experiments are humidity 30-90% r.h. and radon concentration 2-40 kBqm{sup -3}. The aerosol sources included electric fumigator, mosquito coil, incense, a cigarette with the particle concentration 2000-6500 cm{sup -3} and the attachment rate 10-350 h{sup -1}. The results of the experiment show that the equilibrium factor tends to decrease as the radon concentration increases. On the other hand, the equilibrium factor tends to increase as the humidity increases, and so is the increasing attachment rate. Of all the parameters mentioned above, the influence that aerosols have on the equilibrium factor is the predominant factor. The calculated deposition velocity for the unattached fraction of radon daughters tends to increase as the radon concentration increases. However, it tends to decrease as the humidity increases. (Author).

  13. In-hospital resuscitation evaluated by in situ simulation: a prospective simulation study

    DEFF Research Database (Denmark)

    Mondrup, Frederik; Brabrand, Mikkel; Folkestad, Lars

    2011-01-01

    , and to examine differences in the resuscitation performance between the first responders and the cardiac arrest team. METHOD: S: A prospective observational study of 16 unannounced simulated cardiopulmonary arrest scenarios was conducted. The participants of the study involved all health care personel on duty...... who responded to a cardiac arrest. We measured NFR and time to detection of initial rhythm on defibrillator and performed a comparison between the first responders and the cardiac arrest team. RESULTS: : Data from 13 out of 16 simulations was used to evaluate the ability of generating resuscitation...... performance data in simulated cardiac arrest. The defibrillator arrived after median 214 seconds (180-254) and detected initial rhythm after median 311 seconds (283-349). A significant difference in no flow ratio (NFR) was observed between the first responders, median NFR 38% (32-46), and the resuscitation...

  14. APPLICATION OF NUMERICAL SIMULATION TO STUDY ON THERMAL CONDUCTION

    Institute of Scientific and Technical Information of China (English)

    C. Zhu; Z. Xu; D.E. Wu

    2004-01-01

    In this paper, using computer simulation and mathematic experiment method to solve the simplified one dimensional thermal conduction equation and to obtain the temperature distribution in a metal bar when its one end was heated. According to principle of hot expansion, a holograph of temperature distribution in the bar by laser holotechnique was taken. The results of numerical simulation and experiments are in good agreement and a new method for study on thermal conduction by laser holo-technique was found.

  15. EXPERIMENTAL STUDY AND NUMERICAL SIMULATION OF FLUORIDE IN SAND

    Institute of Scientific and Technical Information of China (English)

    ZHANG Hong-mei; SU Bao-yu

    2006-01-01

    The transport and transformation of fluoride in sand were studied by using soil tank test under the condition of saturated water in this article. Based on the analysis of the laboratory experiments, the rules of fluorine transportation and transformation were simulated in sand by solving the advection-diffusion equation. Through comparison between computed results and observed data , it is shown that the established model and determined parameters could be used to simulate the fluoride transport in sand.

  16. Virtual reality simulation training of mastoidectomy - studies on novice performance.

    Science.gov (United States)

    Andersen, Steven Arild Wuyts

    2016-08-01

    Virtual reality (VR) simulation-based training is increasingly used in surgical technical skills training including in temporal bone surgery. The potential of VR simulation in enabling high-quality surgical training is great and VR simulation allows high-stakes and complex procedures such as mastoidectomy to be trained repeatedly, independent of patients and surgical tutors, outside traditional learning environments such as the OR or the temporal bone lab, and with fewer of the constraints of traditional training. This thesis aims to increase the evidence-base of VR simulation training of mastoidectomy and, by studying the final-product performances of novices, investigates the transfer of skills to the current gold-standard training modality of cadaveric dissection, the effect of different practice conditions and simulator-integrated tutoring on performance and retention of skills, and the role of directed, self-regulated learning. Technical skills in mastoidectomy were transferable from the VR simulation environment to cadaveric dissection with significant improvement in performance after directed, self-regulated training in the VR temporal bone simulator. Distributed practice led to a better learning outcome and more consolidated skills than massed practice and also resulted in a more consistent performance after three months of non-practice. Simulator-integrated tutoring accelerated the initial learning curve but also caused over-reliance on tutoring, which resulted in a drop in performance when the simulator-integrated tutor-function was discontinued. The learning curves were highly individual but often plateaued early and at an inadequate level, which related to issues concerning both the procedure and the VR simulator, over-reliance on the tutor function and poor self-assessment skills. Future simulator-integrated automated assessment could potentially resolve some of these issues and provide trainees with both feedback during the procedure and immediate

  17. Effect of simulator motion cuing on steering control performance : Driving simulator study

    NARCIS (Netherlands)

    Feenstra, P.J.; Horst, A.R.A. van der; Grácio, B.J.C.; Wentink, M.

    2010-01-01

    The goal of the present study was to explore how simulator motion cuing affects the driver's control performance of a car. Steering behavior was used as a measure of control performance. The experimental task was a slalom maneuver in which the velocity of the car was limited to 70 km/h. Subjective

  18. The Effect of Simulator Motion Cueing on Steering Control Performance – a Driving Simulator Study

    NARCIS (Netherlands)

    Feenstra, P.; Horst, A.R.A. van der; Correia Grácio, B.J.; Wentink, M.

    2010-01-01

    The goal of the presented study was to explore how simulator motion cueing affects the driver’s control performance of a car. We looked at steering behavior as a measure of control performance. The experimental task was a slalom maneuver where the car velocity was limited to 70 km/h. Subjective and

  19. Human factors in resuscitation: Lessons learned from simulator studies

    Directory of Open Access Journals (Sweden)

    Hunziker S

    2010-01-01

    Full Text Available Medical algorithms, technical skills, and repeated training are the classical cornerstones for successful cardiopulmonary resuscitation (CPR. Increasing evidence suggests that human factors, including team interaction, communication, and leadership, also influence the performance of CPR. Guidelines, however, do not yet include these human factors, partly because of the difficulties of their measurement in real-life cardiac arrest. Recently, clinical studies of cardiac arrest scenarios with high-fidelity video-assisted simulations have provided opportunities to better delineate the influence of human factors on resuscitation team performance. This review focuses on evidence from simulator studies that focus on human factors and their influence on the performance of resuscitation teams. Similar to studies in real patients, simulated cardiac arrest scenarios revealed many unnecessary interruptions of CPR as well as significant delays in defibrillation. These studies also showed that human factors play a major role in these shortcomings and that the medical performance depends on the quality of leadership and team-structuring. Moreover, simulated video-taped medical emergencies revealed that a substantial part of information transfer during communication is erroneous. Understanding the impact of human factors on the performance of a complex medical intervention like resuscitation requires detailed, second-by-second, analysis of factors involving the patient, resuscitative equipment such as the defibrillator, and all team members. Thus, high-fidelity simulator studies provide an important research method in this challenging field.

  20. Simulation of Interval Censored Data in Medical and Biological Studies

    Science.gov (United States)

    Kiani, Kaveh; Arasan, Jayanthi

    This research looks at the simulation of interval censored data when the survivor function of the survival time is known and attendance probability of the subjects for follow-ups can take any number between 0 to 1. Interval censored data often arise in the medical and biological follow-up studies where the event of interest occurs somewhere between two known times. Regardless of the methods used to analyze these types of data, simulation of interval censored data is an important and challenging step toward model building and prediction of survival time. The simulation itself is rather tedious and very computer intensive due to the interval monitoring of subjects at prescheduled times and subject's incomplete attendance to follow-ups. In this paper the simulated data by the proposed method were assessed using the bias, standard error and root mean square error (RMSE) of the parameter estimates where the survival time T is assumed to follow the Gompertz distribution function.

  1. Virtual Gaming Simulation in Nursing Education: A Focus Group Study.

    Science.gov (United States)

    Verkuyl, Margaret; Hughes, Michelle; Tsui, Joyce; Betts, Lorraine; St-Amant, Oona; Lapum, Jennifer L

    2017-05-01

    The use of serious gaming in a virtual world is a novel pedagogical approach in nursing education. A virtual gaming simulation was implemented in a health assessment class that focused on mental health and interpersonal violence. The study's purpose was to explore students' experiences of the virtual gaming simulation. Three focus groups were conducted with a convenience sample of 20 first-year nursing students after they completed the virtual gaming simulation. Analysis yielded five themes: (a) Experiential Learning, (b) The Learning Process, (c) Personal Versus Professional, (d) Self-Efficacy, and (e) Knowledge. Virtual gaming simulation can provide experiential learning opportunities that promote engagement and allow learners to acquire and apply new knowledge while practicing skills in a safe and realistic environment. [J Nurs Educ. 2017;56(5):274-280.]. Copyright 2017, SLACK Incorporated.

  2. Simulation studies for the evaluation of health information technologies

    DEFF Research Database (Denmark)

    Ammenwerth, Elske; Hackl, Werner; Binzer, Kristine

    2012-01-01

    It is essential for new health information technologies (IT) to undergo rigorous evaluations to ensure they are effective and safe for use in real-world situations. However, evaluation of new health IT is challenging, as field studies are often not feasible when the technology being evaluated...... is not sufficiently mature. Laboratory-based evaluations have also been shown to have insufficient external validity. Simulation studies seem to be a way to bridge this gap. The aim of this study was to evaluate, using a simulation methodology, the impact of a new prototype of an electronic medication management...

  3. Study of numerical errors in direct numerical simulation and large eddy simulation

    Institute of Scientific and Technical Information of China (English)

    YANG Xiao-long; FU Song

    2008-01-01

    By comparing the energy spectrum and total kinetic energy, the effects of numerical errors (which arise from aliasing and discretization errors), subgrid-scale (SGS) models, and their interactions on direct numerical simulation (DNS) and large eddy simulation (LES) are investigated. The decaying isotropic turbulence is chosen as the test case. To simulate complex geometries, both the spectral method and Pade compact difference schemes are studied. The truncated Navier-Stokes (TNS) equation model with Pade discrete filter is adopted as the SGS model. It is found that the discretization error plays a key role in DNS. Low order difference schemes may be unsuitable. However, for LES, it is found that the SGS model can represent the effect of small scales to large scales and dump the numerical errors. Therefore, reasonable results can also be obtained with a low order discretization scheme.

  4. Evidence of clinical competence by simulation, a hermeneutical observational study.

    Science.gov (United States)

    Lejonqvist, Gun-Britt; Eriksson, Katie; Meretoja, Riitta

    2016-03-01

    Making the transition from theory to practise easier in nursing education through simulation is widely implemented all over the world, and there is research evidence of the positive effects of simulation. The pre-understanding for this study is based on a definition of clinical competence as encountering, knowing, performing, maturing and developing, and the hypothesis is that these categories should appear in simulated situations. The aim of the study was to explore the forms and expressions of clinical competence in simulated situations and furthermore to explore if and how clinical competence could be developed by simulation. An observational hermeneutic study with a hypothetic-deductive approach was used in 18 simulated situations with 39 bachelor degree nursing students. In the situations, the scenarios, the actors and the plots were described. The story told was "the way from suffering to health" in which three main plots emerged. The first was, doing as performing and knowing, which took the shape of knowing what to do, acting responsibly, using evidence and equipment, appearing confident and feeling comfortable, and sharing work and information with others. The second was, being as encountering the patient, which took the shape of being there for him/her and confirming by listening and answering. The third plot was becoming as maturing and developing which took the shape of learning in co-operation with other students. All the deductive categories, shapes and expressions appeared as dialectic patterns having their negative counterparts. The study showed that clinical competence can be made evident and developed by simulation and that the challenge is in encountering the patient and his/her suffering.

  5. A Simulation Study of Missing Data with Multiple Missing X's

    Science.gov (United States)

    Rubright, Jonathan D.; Nandakumar, Ratna; Glutting, Joseph J.

    2014-01-01

    When exploring missing data techniques in a realistic scenario, the current literature is limited: most studies only consider consequences with data missing on a single variable. This simulation study compares the relative bias of two commonly used missing data techniques when data are missing on more than one variable. Factors varied include type…

  6. Framework for Architecture Trade Study Using MBSE and Performance Simulation

    Science.gov (United States)

    Ryan, Jessica; Sarkani, Shahram; Mazzuchim, Thomas

    2012-01-01

    Increasing complexity in modern systems as well as cost and schedule constraints require a new paradigm of system engineering to fulfill stakeholder needs. Challenges facing efficient trade studies include poor tool interoperability, lack of simulation coordination (design parameters) and requirements flowdown. A recent trend toward Model Based System Engineering (MBSE) includes flexible architecture definition, program documentation, requirements traceability and system engineering reuse. As a new domain MBSE still lacks governing standards and commonly accepted frameworks. This paper proposes a framework for efficient architecture definition using MBSE in conjunction with Domain Specific simulation to evaluate trade studies. A general framework is provided followed with a specific example including a method for designing a trade study, defining candidate architectures, planning simulations to fulfill requirements and finally a weighted decision analysis to optimize system objectives.

  7. Dark Energy Studies with LSST Image Simulations, Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, John Russell [Purdue Univ., West Lafayette, IN (United States)

    2016-07-26

    This grant funded the development and dissemination of the Photon Simulator (PhoSim) for the purpose of studying dark energy at high precision with the upcoming Large Synoptic Survey Telescope (LSST) astronomical survey. The work was in collaboration with the LSST Dark Energy Science Collaboration (DESC). Several detailed physics improvements were made in the optics, atmosphere, and sensor, a number of validation studies were performed, and a significant number of usability features were implemented. Future work in DESC will use PhoSim as the image simulation tool for data challenges used by the analysis groups.

  8. More about Zener drag studies with Monte Carlo simulations

    Science.gov (United States)

    Di Prinzio, Carlos L.; Druetta, Esteban; Nasello, Olga Beatriz

    2013-03-01

    Grain growth (GG) processes in the presence of second-phase and stationary particles have been widely studied but the results found are inconsistent. We present new GG simulations in two- and three-dimensional (2D and 3D) polycrystalline samples with second phase stationary particles, using the Monte Carlo technique. Simulations using values of particle concentration greater than 15% and particle radii different from 1 or 3 are performed, thus covering a range of particle radii and concentrations not previously studied. It is shown that only the results for 3D samples follow Zener's law.

  9. Observer study to evaluate the simulation of mammographic calcification clusters

    Science.gov (United States)

    Sousa, Maria A. Z.; Marcomini, Karem D.; Bakic, Predrag R.; Maidment, Andrew D. A.; Schiabel, Homero

    2016-03-01

    Numerous breast phantoms have been developed to be as realistic as possible to ensure the accuracy of image quality analysis, covering a greater range of applications. In this study, we simulated three different densities of the breast parenchyma using paraffin gel, acrylic plates and PVC films. Hydroxyapatite was used to simulate calcification clusters. From the images acquired with a GE Senographe DR 2000D mammography system, we selected 68 regions of interest (ROIs) with and 68 without a simulated calcification cluster. To validate the phantom simulation, we selected 136 ROIs from the University of South Florida's Digital Database for Screening Mammography (DDSM). Seven trained observers performed two observer experiments by using a high-resolution monitor Barco mod. E-3620. In the first experiment, the observers had to distinguish between real or phantom ROIs (with and without calcification). In the second one, the observers had to indicate the ROI with calcifications between a pair of ROIs. Results from our study show that the hydroxyapatite calcifications had poor contrast in the simulated breast parenchyma, thus observers had more difficulty in identifying the presence of calcification clusters in phantom images. Preliminary analysis of the power spectrum was conducted to investigate the radiographic density and the contrast thresholds for calcification detection. The values obtained for the power spectrum exponent (β) were comparable with those found in the literature.

  10. A simulation study comparing aberration detection algorithms for syndromic surveillance

    Directory of Open Access Journals (Sweden)

    Painter Ian

    2007-03-01

    Full Text Available Abstract Background The usefulness of syndromic surveillance for early outbreak detection depends in part on effective statistical aberration detection. However, few published studies have compared different detection algorithms on identical data. In the largest simulation study conducted to date, we compared the performance of six aberration detection algorithms on simulated outbreaks superimposed on authentic syndromic surveillance data. Methods We compared three control-chart-based statistics, two exponential weighted moving averages, and a generalized linear model. We simulated 310 unique outbreak signals, and added these to actual daily counts of four syndromes monitored by Public Health – Seattle and King County's syndromic surveillance system. We compared the sensitivity of the six algorithms at detecting these simulated outbreaks at a fixed alert rate of 0.01. Results Stratified by baseline or by outbreak distribution, duration, or size, the generalized linear model was more sensitive than the other algorithms and detected 54% (95% CI = 52%–56% of the simulated epidemics when run at an alert rate of 0.01. However, all of the algorithms had poor sensitivity, particularly for outbreaks that did not begin with a surge of cases. Conclusion When tested on county-level data aggregated across age groups, these algorithms often did not perform well in detecting signals other than large, rapid increases in case counts relative to baseline levels.

  11. A chemical EOR benchmark study of different reservoir simulators

    Science.gov (United States)

    Goudarzi, Ali; Delshad, Mojdeh; Sepehrnoori, Kamy

    2016-09-01

    chemical design for field-scale studies using commercial simulators. The benchmark tests illustrate the potential of commercial simulators for chemical flooding projects and provide a comprehensive table of strengths and limitations of each simulator for a given chemical EOR process. Mechanistic simulations of chemical EOR processes will provide predictive capability and can aid in optimization of the field injection projects. The objective of this paper is not to compare the computational efficiency and solution algorithms; it only focuses on the process modeling comparison.

  12. Study, simulation and design of a 3D clinostat

    Science.gov (United States)

    Pavone, Valentina; Guarnieri, Vincenzo; Lobascio, Cesare; Soma, Aurelio; Bosso, Nicola; Lamantea, Matteo Maria

    High cost and limited number of physically executable experiments in space have introduced the need for ground simulation systems that enable preparing experiments to be carried out on board, identifying phenomena associated with the altered gravity conditions, and taking advantage of these conditions, as in Biotechnology. Among systems developed to simulate microgravity, especially for life sciences experiments, different types of clinostats were realized. This work deals with mechanical design of a three-dimensional clinostat and simulation of the dynamic behavior of the system by varying the operating parameters. The design and simulation phase was preceded by a careful analysis of the state of art and by the review of the most recent results, in particular from the major investigators of Life Sciences in Space. The mechanical design is quite innovative by adoption of a structure entirely in aluminum, which allows robustness while reducing the overall weight. The transmission system of motion has been optimized by means of brushless DC micro motors, light and compact, which helped to reduce weight, dimensions, power consumption and increase the reliability and durability of the system. The study of the dynamic behavior using SIMPACK, a multibody simulation software, led to results in line with those found in the most important and recent scientific publications. This model was also appropriately configured to represent any desired operating condition, and for eventual system scalability. It would be interesting to generate simulated hypogravity - e.g.: 0.38-g (Mars) or 0.17-g (Moon). This would allow to investigate how terrestrial life forms can grow in other planetary habitats, or to determine the gravity threshold response of different organisms. At the moment, such a system can only be achieved by centrifuges in real microgravity. We are confident that simulation and associated tests with our 3D clinostat can help adjusting the parameters allowing variable g

  13. The simulation study on optical target laser active detection performance

    Science.gov (United States)

    Li, Ying-chun; Hou, Zhao-fei; Fan, Youchen

    2014-12-01

    According to the working principle of laser active detection system, the paper establishes the optical target laser active detection simulation system, carry out the simulation study on the detection process and detection performance of the system. For instance, the performance model such as the laser emitting, the laser propagation in the atmosphere, the reflection of optical target, the receiver detection system, the signal processing and recognition. We focus on the analysis and modeling the relationship between the laser emitting angle and defocus amount and "cat eye" effect echo laser in the reflection of optical target. Further, in the paper some performance index such as operating range, SNR and the probability of the system have been simulated. The parameters including laser emitting parameters, the reflection of the optical target and the laser propagation in the atmosphere which make a great influence on the performance of the optical target laser active detection system. Finally, using the object-oriented software design methods, the laser active detection system with the opening type, complete function and operating platform, realizes the process simulation that the detection system detect and recognize the optical target, complete the performance simulation of each subsystem, and generate the data report and the graph. It can make the laser active detection system performance models more intuitive because of the visible simulation process. The simulation data obtained from the system provide a reference to adjust the structure of the system parameters. And it provides theoretical and technical support for the top level design of the optical target laser active detection system and performance index optimization.

  14. The organisation of transactions : studying supply networkd using gaming simulation

    NARCIS (Netherlands)

    Meijer, S.A.

    2009-01-01

    This book studies the organisation of transactions in supply networks. More specifically it investigates the influence of social structure on the mode of organisation in supply networks. To gain new insights, the results in this book have been gathered using gaming simulation as a research method. A

  15. The organisation of transactions : studying supply networkd using gaming simulation

    NARCIS (Netherlands)

    Meijer, S.A.

    2009-01-01

    This book studies the organisation of transactions in supply networks. More specifically it investigates the influence of social structure on the mode of organisation in supply networks. To gain new insights, the results in this book have been gathered using gaming simulation as a research method. A

  16. Bias-correction in vector autoregressive models: A simulation study

    DEFF Research Database (Denmark)

    Engsted, Tom; Pedersen, Thomas Quistgaard

    We analyze and compare the properties of various methods for bias-correcting parameter estimates in vector autoregressions. First, we show that two analytical bias formulas from the existing literature are in fact identical. Next, based on a detailed simulation study, we show that this simple and...

  17. A simulation study of a controlled tokamak plasma

    Science.gov (United States)

    Fujii, N.; Niwa, Y.

    1980-03-01

    A tokamak circuit theory, including results of numerical simulation studies, is applied to a control system synthesized for a Joule heated tokamak plasma. The treatment is similar to that of Ogata and Ninomiya (1979) except that in this case a quadrupole field coil current is considered coexisting with image induced on a vacuum chamber.

  18. Biomolecular recognition mechanisms studied by NMR spectroscopy and MD simulations

    NARCIS (Netherlands)

    Hsu, Shang-Te Danny

    2004-01-01

    This thesis describes the use of solution Nuclear Magnetic Resonance (NMR) spectroscopy and Molecular Dynamics (MD) simulations to study the mechanism of biomolecular recognition with two model systems: i) lipid II-binding lantibiotics (lanthionine-containing antibiotics) and ii) the human immunodef

  19. Granularity of ATLAS Tile Calorimeter studied through simulations

    CERN Document Server

    Romero Hernandez, Anabel Cristina

    2015-01-01

    A small study, done through simulations, of the energy resolution of ATLAS Tile Calorimeter dependence on granularity is presented. The results could indicate that finer granularity of the calorimeter gives better energy resolution, although it would require better statistics to be sure.

  20. A Nanoscale Simulation Study of Elastic Properties of Gaspeite

    Directory of Open Access Journals (Sweden)

    Benazzouz Brahim-Khalil

    2015-02-01

    Full Text Available The study of structural and mechanical properties of carbonate rock is an interesting subject in engineering and its different applications. In this paper, the crystal structure of gaspeite (NiCO3 is investigated by carrying out molecular dynamics simulations based on energy minimization technique using an interatomic interaction potential.

  1. DEPLETION POTENTIAL OF COLLOIDS:A DIRECT SIMULATION STUDY

    Institute of Scientific and Technical Information of China (English)

    李卫华; 薛松; 马红孺

    2001-01-01

    The depletion interaction between abig sphere and a hard wall and between two big hard spheres in a hard sphere colloidal sytem was studied by the Monte Carlo method.Direct simulation of free energy difference was performed by means of the Acceptance Ratio Method (ARM).

  2. An Integrated Simulation System for Human Factors Study

    CERN Document Server

    Wang, Ying; Bennis, Fouad; Chablat, Damien

    2007-01-01

    It has been reported that virtual reality can be a useful tool for ergonomics study. The proposed integrated simulation system aims at measuring operator's performance in an interactive way for 2D control panel design. By incorporating some sophisticated virtual reality hardware/software, the system allows natural human-system and/or human-human interaction in a simulated virtual environment; enables dynamic objective measurement of human performance; and evaluates the quality of the system design in human factors perspective based on the measurement. It can also be for operation training for some 2D control panels.

  3. Simulation study on radiative imaging of combustion flame in furnace

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Radiative imaging of combustion flame in furnace of power plant plays an increasingly important role in combustion diagnosis. This paper presents a new method for calculating the radiative imaging of three-dimensional (3D) combustion flame based on Monte Carlo method and optical lens imaging. Numerical simulation case was used in this study. Radiative images were calculated and images obtained can not only present the energy distribution on the charge-coupled device (CCD) camera target plane but also reflect the energy distribution condition in the simulation furnace. Finally the relationships between volume elements and energy shares were also discussed.

  4. A Study of the Simulation Platform of WCDMA

    Institute of Scientific and Technical Information of China (English)

    ZHU Song-jian; SONG Mei; REN Li-gang; SONG Jun-de

    2004-01-01

    In this paper, we present a new simulation platform of 3G (the third-generation mobile communication). Combined with the concept of Software Defined Radio (SDR) and complied with the 3rd Generation Partnership Project (3GPP) proposal, first, we build up a general structure platform of the downlink physical layer based on 3G WCDMA (FDD) in COSSAP software package, then study such key technology of 3G as turbo encoders and decoders, RAKE receivers. The simulation result is similar to relevant documents. As a result, it could be applied as a basic platform to do further research on the key technology in SDR field.

  5. Shear Viscosity of Liquid Potassium and Cesium: a Simulation Study

    Science.gov (United States)

    Meyer, Nadège; Xu, Hong; Wax, Jean-François

    2017-08-01

    The density and temperature dependences of the shear viscosity of liquid potassium and cesium are studied. The stress autocorrelation function is calculated from equilibrium molecular dynamics simulations. Using the Green-Kubo formula, the shear viscosity is obtained. Interionic interactions are calculated by Fiolhais potential and are validated by comparison between simulation and experimental data along the liquid-gas coexistence curve for K and Cs. For both metals, three isochors and one isotherm are investigated. The recently proposed relation in [Phys. Rev. B 93, 214203 (2016)] is tested in the cases of K and Cs and it appears that this function reproduces qualitatively and quantitatively well the behavior of each element.

  6. Simulation Study of a Vehicle Production Line for Productivity Improvement

    Directory of Open Access Journals (Sweden)

    M.F.F. Ab Rashid

    2015-06-01

    Full Text Available This paper presents the study of a motorcycle frame production line in a particular company in Malaysia. Due to the high demand, the company needs to increase its production by at least 12% compared with current output. In order to improve productivity, the production-floor data was collected and simulated using the discrete event simulation approach. Later, a number of suggestions for improvement were simulated to identify the effect of the suggestions on productivity. In addition, cost analysis was also undertaken to identify the profit margin for a particular period of time for each suggestion. Simulation results indicate that there are three suggestions that are able to fulfill the 12% volume increment. In the short term, the suggestion to hire an assistant line leader will give instant effect to the profit. Meanwhile, for the medium term, Poka-yoke will give higher profit compared with the others, while in the long term, SOP (standard operating procedure implementation will yield a better profit margin. In future, the simulation of a dynamic demand model for this product is suggested to cope with new trends in the market.

  7. Molecular simulation studies of reversed-phase liquid chromatography.

    Science.gov (United States)

    Lindsey, Rebecca K; Rafferty, Jake L; Eggimann, Becky L; Siepmann, J Ilja; Schure, Mark R

    2013-04-26

    Over the past 20 years, molecular simulation methods have been applied to the modeling of reversed-phase liquid chromatography (RPLC). The purpose of these simulations was to provide a molecular-level understanding of: (i) the structure and dynamics of the bonded phase and its interface with the mobile phase, (ii) the interactions of analytes with the bonded phase, and (iii) the retention mechanism for different analytes. However, the investigation of chromatographic systems poses significant challenges for simulations with respect to the accuracy of the molecular mechanics force fields and the efficiency of the sampling algorithms. This review discusses a number of aspects concerning molecular simulation studies of RPLC systems including the historical development of the subject, the background needed to understand the two prevalent techniques, molecular dynamics (MD) and Monte Carlo (MC) methods, and the wealth of insight provided by these simulations. Examples from the literature employing MD approaches and from the authors' laboratory using MC methods are discussed. The former can provide information on chain dynamics and transport properties, whereas the latter techniques are uniquely suited for the investigation of phase and sorption equilibria that underly RPLC retention, and both can be used to elucidate the bonded-chain conformations and solvent distributions. Copyright © 2013 Elsevier B.V. All rights reserved.

  8. Planetary Simulation Chambers bring Mars to laboratory studies

    Energy Technology Data Exchange (ETDEWEB)

    Mateo-Marti, E.

    2016-07-01

    Although space missions provide fundamental and unique knowledge for planetary exploration, they are always costly and extremely time-consuming. Due to the obvious technical and economical limitations of in-situ planetary exploration, laboratory simulations are among the most feasible research options for making advances in planetary exploration. Therefore, laboratory simulations of planetary environments are a necessary and complementary option to expensive space missions. Simulation chambers are economical, more versatile, and allow for a higher number of experiments than space missions. Laboratory-based facilities are able to mimic the conditions found in the atmospheres and on the surfaces of a majority of planetary objects. Number of relevant applications in Mars planetary exploration will be described in order to provide an understanding about the potential and flexibility of planetary simulation chambers systems: mainly, stability and presence of certain minerals on Mars surface; and microorganisms potential habitability under planetary environmental conditions would be studied. Therefore, simulation chambers will be a promising tools and necessary platform to design future planetary space mission and to validate in-situ measurements from orbital or rover observations. (Author)

  9. Hospital occupancy and discharge strategies: a simulation-based study.

    Science.gov (United States)

    Qin, Shaowen; Thompson, Campbell; Bogomolov, Tim; Ward, Dale; Hakendorf, Paul

    2017-08-01

    Increasing demand for hospital services has resulted in more arrivals to emergency department (ED), increased admissions, and, quite often, access block and ED congestion, along with patients' dissatisfaction. Cost constraints limit an increase in the number of hospital beds, so alternative solutions need to be explored. To propose and test different discharge strategies, which, potentially, could reduce occupancy rates in the hospital, thereby improving patient flow and minimising frequency and duration of congestion episodes. We used a simulation approach using HESMAD (Hospital Event Simulation Model: Arrivals to Discharge) - a sophisticated simulation model capturing patient flow through a large Australian hospital from arrival at ED to discharge. A set of simulation experiments with a range of proposed discharge strategies was carried out. The results were tabulated, analysed and compared using common hospital occupancy indicators. Simulation results demonstrated that it is possible to reduce significantly the number of days when a hospital runs above its base bed capacity. In our case study, this reduction was from 281.5 to 22.8 days in the best scenario, and reductions within the above range under other scenarios considered. Some relatively simple strategies, such as 24-h discharge or discharge/relocation of long-staying patients, can significantly reduce overcrowding and improve hospital occupancy rates. Shortening administrative and/or some treatment processes have a smaller effect, although the latter could be easier to implement. © 2017 Royal Australasian College of Physicians.

  10. Simulation studies of the wavelength-shifting optical module

    Energy Technology Data Exchange (ETDEWEB)

    Di Lorenzo, Vincenzo; Del Pino Rosendo, Esther; Boeser, Sebastian [Johannes Gutenberg-Universitaet, Mainz (Germany); Collaboration: IceCube-Collaboration

    2016-07-01

    The Wavelength-shifting Optical Module (WOM) is a concept for a photon sensor developed for the next generation of the IceCube experiment. The large sensitivity area in combination with the high photon detection efficiency, in particular in the UV region, as well as the low dark noise rates are prominent features of this sensor. A prototype of the WOM is being developed and shows promising results, but some questions are still open. We present here results from a Geant4 simulation used to study the light propagation inside the WOM and the principle reasons of light loss during photon propagation. Using this simulation, it is possible to reproduce the dominant physical effects inside the tube and correlate the simulated results with the experimental ones.

  11. Advanced studies on Simulation Methodologies for very Complicated Fracture Phenomena

    Science.gov (United States)

    Nishioka, Toshihisa

    2010-06-01

    Although nowadays, computational techniques are well developed, for Extremely Complicated Fracture Phenomena, they are still very difficult to simulate, for general engineers, researchers. To overcome many difficulties in those simulations, we have developed not only Simulation Methodologies but also theoretical basis and concepts. We sometimes observe extremely complicated fracture patterns, especially in dynamic fracture phenomena such as dynamic crack branching, kinking, curving, etc. For examples, although the humankind, from primitive men to modern scientists such as Albert Einstein had watched the post-mortem patterns of dynamic crack branching, the governing condition for the onset of the phenomena had been unsolved until our experimental study. From in these studies, we found the governing condition of dynamic crack bifurcation, as follows. When the total energy flux per unit time into a propagating crack tip reaches the material crack resistance, the crack braches into two cracks [total energy flux criterion]. The crack branches many times whenever the criterion is satisfied. Furthermore, the complexities also arise due to their time-dependence and/or their-deformation dependence. In order to make it possible to simulate such extremely complicated fracture phenomena, we developed many original advanced computational methods and technologies. These are (i)moving finite element method based on Delaunay automatic triangulation (MFEMBOAT), path independent,(ii) equivalent domain integral expression of the dynamic J integral associated with a continuous auxiliary function,(iii) Mixed phase path-prediction mode simulation, (iv) implicit path prediction criterion. In this paper, these advanced computational methods are thoroughly explained together with successful comparison with the experimental results. Since multiple dynamic crack branching phenomena may be most complicated fracture due to complicated fracture paths, and its time dependence (transient), this

  12. Mathematical and computational modeling and simulation fundamentals and case studies

    CERN Document Server

    Moeller, Dietmar P F

    2004-01-01

    Mathematical and Computational Modeling and Simulation - a highly multi-disciplinary field with ubiquitous applications in science and engineering - is one of the key enabling technologies of the 21st century. This book introduces to the use of Mathematical and Computational Modeling and Simulation in order to develop an understanding of the solution characteristics of a broad class of real-world problems. The relevant basic and advanced methodologies are explained in detail, with special emphasis on ill-defined problems. Some 15 simulation systems are presented on the language and the logical level. Moreover, the reader can accumulate experience by studying a wide variety of case studies. The latter are briefly described within the book but their full versions as well as some simulation software demos are available on the Web. The book can be used for University courses of different level as well as for self-study. Advanced sections are marked and can be skipped in a first reading or in undergraduate courses...

  13. Simulation studies for the evaluation of health information technologies

    DEFF Research Database (Denmark)

    Ammenwerth, Elske; Hackl, Werner; Binzer, Kristine

    2012-01-01

    It is essential for new health information technologies (IT) to undergo rigorous evaluations to ensure they are effective and safe for use in real-world situations. However, evaluation of new health IT is challenging, as field studies are often not feasible when the technology being evaluated...... is not sufficiently mature. Laboratory-based evaluations have also been shown to have insufficient external validity. Simulation studies seem to be a way to bridge this gap. The aim of this study was to evaluate, using a simulation methodology, the impact of a new prototype of an electronic medication management...... and lessons learnt while conducting the study. Although the new electronic medication management system showed tendencies to improve medication safety when compared with the standard system, this tendency was not significant. Altogether, five distinct situations were identified where the new medication...

  14. Simulation Studies for the evaluation of health information technologies:

    DEFF Research Database (Denmark)

    Ammenwerth, Elske; Hackl, Werner O; Binzer, Kristine

    2012-01-01

    It is essential for new health information technologies (IT) to undergo rigorous evaluations to ensure they are effective and safe for use in real-world situations. However, evaluation of new health IT is challenging, as field studies are often not feasible when the technology being evaluated...... is not sufficiently mature. Laboratory-based evaluations have also been shown to have insufficient external validity. Simulation studies seem to be a way to bridge this gap. The aim of this study was to evaluate, using a simulation methodology, the impact of a new prototype of an electronic medication management...... and lessons learnt while conducting the study. Although the new electronic medication management system showed tendencies to improve medication safety when compared with the standard system, this tendency was not significant. Altogether, fi ve distinct situations were identifi ed where the new medication...

  15. Theoretical studies of lipid bilayer electroporation using molecular dynamics simulations

    Science.gov (United States)

    Levine, Zachary Alan

    Computer simulations of physical, chemical, and biological systems have improved tremendously over the past five decades. From simple studies of liquid argon in the 1960s to fully atomistic simulations of entire viruses in the past few years, recent advances in high-performance computing have continuously enabled simulations to bridge the gap between scientific theory and experiment. Molecular dynamics simulations in particular have allowed for the direct observation of spatial and temporal events which are at present inaccessible to experiments. For this dissertation I employ all-atom molecular dynamics simulations to study the transient, electric field-induced poration (or electroporation) of phospholipid bilayers at MV/m electric fields. Phospholipid bilayers are the dominant constituents of cell membranes and act as both a barrier and gatekeeper to the cell interior. This makes their structural integrity and susceptibility to external perturbations an important topic for study, especially as the density of electromagnetic radiation in our environment is increasing steadily. The primary goal of this dissertation is to understand the specific physical and biological mechanisms which facilitate electroporation, and to connect our simulated observations to experiments with live cells and to continuum models which seek to describe the underlying biological processes of electroporation. In Chapter 1 I begin with a brief introduction to phospholipids and phospholipid bilayers, followed by an extensive overview of electroporation and atomistic molecular dynamics simulations. The following chapters will then focus on peer-reviewed and published work we performed, or on existing projects which are currently being prepared for submission. Chapter 2 looks at how external electric fields affect both oxidized and unoxidized lipid bilayers as a function of oxidation concentration and oxidized lipid type. Oxidative damage to cell membranes represents a physiologically relevant

  16. Experimental study and numerical simulation of evacuation from a dormitory

    Science.gov (United States)

    Lei, Wenjun; Li, Angui; Gao, Ran; Zhou, Ning; Mei, Sen; Tian, Zhenguo

    2012-11-01

    The evacuation process of students from a dormitory is investigated by both experiment and modeling. We investigate the video record of pedestrian movement in a dormitory, and find some typical characteristics of evacuation, including continuous pedestrian flow, mass behavior and so on. Based on the experimental observation, we found that simulation results considering pre-movement time are closer to the experimental results. With the model considering pre-movement time, we simulate the evacuation process and compare the simulation results with the experimental results, and find that they agree with each other closely. The crowd massing phenomenon is conducted in this paper. It is found that different crowd massing phenomena will emerge due to different desired velocities. The crowd massing phenomenon could be more serious with the increase of the desired velocity. In this study, we also found the faster-is-slower effect. When the positive effect produced by increasing the desired velocity is not sufficient for making up for its negative effect, the phenomenon of the greater the desired velocity the longer the time required for evacuation will emerge. From the video record, it can be observed that the mass behavior is obvious during the evacuation process. And the mass phenomenon could also be found in simulation. The results obtained from our study are also suitable to all these buildings in which both living and resting areas occupy the majority space, such as dormitories, residential buildings, hotels (restaurants) and so on.

  17. Study on snowmelt runoff simulation in the Kaidu River basin

    Institute of Scientific and Technical Information of China (English)

    ZHANG YiChi; LI BaoLin; BAO AnMing; ZHOU ChengHu; CHEN Xi; ZHANG XueRen

    2007-01-01

    Alpine snowmelt is an important generation mode for runoff in the source region of the Tarim River basin, which covers four subbasins characterized by large area, sparse gauge stations, mixed runoff supplied by snowmelt and rainfall, and remarkably spatially heterogeneous precipitation. Taking the Kaidu River basin as a research area, this study analyzes the influence of these characteristics on the variables and parameters of the Snow Runoff Model and discusses the corresponding determination strategy to improve the accuracy of snowmelt simulation and forecast. The results show that: (i) The temperature controls the overall tendency of simulated runoff and is dominant to simulation accuracy,as the measured daily mean temperature cannot represent the average level of the same elevation in the basin and that directly inputting it to model leads to inaccurate simulations. Based on the analysis of remote sensing snow maps and simulation results, it is reasonable to approximate the mean temperature with 0.5 time daily maximum temperature. (ii) For the conflict between the limited gauge station and remarkably spatial heterogeneity of rainfall, it is not realistic to compute rainfall for each elevation zone. After the measured rainfall is multiplied by a proper coefficient and adjusted with runoff coefficient for rainfall, the measured rainfall data can satisfy the model demands. (iii) Adjusting time lag according to the variation of snowmelt and rainfall position can improve the simulation precision of the flood peak process. (iv) Along with temperature, the rainfall increases but cannot be completely monitored by limited gauge stations, which results in precision deterioration.

  18. Genetic Testing for Complex Diseases: a Simulation Study Perspective

    CERN Document Server

    Vinh, Nguyen Xuan

    2011-01-01

    It is widely recognized nowadays that complex diseases are caused by, amongst the others, multiple genetic factors. The recent advent of genome-wide association study (GWA) has triggered a wave of research aimed at discovering genetic factors underlying common complex diseases. While the number of reported susceptible genetic variants is increasing steadily, the application of such findings into diseases prognosis for the general population is still unclear, and there are doubts about whether the size of the contribution by such factors is significant. In this respect, some recent simulation-based studies have shed more light to the prospect of genetic tests. In this report, we discuss several aspects of simulation-based studies: their parameters, their assumptions, and the information they provide.

  19. Real versus Simulated Mobile Phone Exposures in Experimental Studies

    Directory of Open Access Journals (Sweden)

    Dimitris J. Panagopoulos

    2015-01-01

    Full Text Available We examined whether exposures to mobile phone radiation in biological/clinical experiments should be performed with real-life Electromagnetic Fields (EMFs emitted by commercially available mobile phone handsets, instead of simulated EMFs emitted by generators or test phones. Real mobile phone emissions are constantly and unpredictably varying and thus are very different from simulated emissions which employ fixed parameters and no variability. This variability is an important parameter that makes real emissions more bioactive. Living organisms seem to have decreased defense against environmental stressors of high variability. While experimental studies employing simulated EMF-emissions present a strong inconsistency among their results with less than 50% of them reporting effects, studies employing real mobile phone exposures demonstrate an almost 100% consistency in showing adverse effects. This consistency is in agreement with studies showing association with brain tumors, symptoms of unwellness, and declines in animal populations. Average dosimetry in studies with real emissions can be reliable with increased number of field measurements, and variation in experimental outcomes due to exposure variability becomes less significant with increased number of experimental replications. We conclude that, in order for experimental findings to reflect reality, it is crucially important that exposures be performed by commercially available mobile phone handsets.

  20. Feasibility study of sedimentary enhanced geothermal systems using reservoir simulation

    Science.gov (United States)

    Cho, Jae Kyoung

    The objective of this research is to evaluate the preliminary feasibility of commercial geothermal projects, from a sedimentary reservoir with low permeability that requires productivity enhancement, using numerical reservoir simulation. The performance of a sedimentary geothermal reservoir is investigated in terms of reservoir hydraulics and thermal evolution. To build a reliable benchmark for simulation study, validation of the numerical reservoir model with respect to an analytical model is presented, and the process to achieve an acceptable match between the numerical and analytical solutions is described. The analytical model used in this study is based on the work of Gringarten (1978), which consists of a conceptual geothermal reservoir, considering an injection and production well doublet in a homogeneous porous media. A commercial thermal reservoir simulator (STARS from Computer Modeling Group, CMG) is used in this work for numerical modeling. In order to reproduce the analytical model results, the numerical simulation model is modified to include the same assumptions of the analytical model. Simulation model parameters that make the numerical results deviate from the analytical solution, such as the grid block size, time step and no-flow boundary are identified and investigated. An analytical tracer test model proposed by Shook (2000) is numerically modeled. This model allows us to predict the time when the temperature of the produced water decreases by capturing a tracer component at production well. Reservoir simulation models with different porosity and permeability distribution are tested to see the effects of reservoir inhomogeneity and anisotropy. In particular, premature thermal breakthrough due to the presence of high permeability streak in a reservoir model is simulated. In an effort to apply the knowledge we obtained from the analytical solutions, the effects of reservoir rock and water properties, as a function of pressure and temperature, are

  1. Study on advancement of in vivo counting using mathematical simulation

    CERN Document Server

    Kinase, S

    2003-01-01

    To obtain an assessment of the committed effective dose, individual monitoring for the estimation of intakes of radionuclides is required. For individual monitoring of exposure to intakes of radionuclides, direct measurement of radionuclides in the body - in vivo counting- is very useful. To advance in a precision in vivo counting which fulfills the requirements of ICRP 1990 recommendations, some problems, such as the investigation of uncertainties in estimates of body burdens by in vivo counting, and the selection of the way to improve the precision, have been studied. In the present study, a calibration technique for in vivo counting application using Monte Carlo simulation was developed. The advantage of the technique is that counting efficiency can be obtained for various shapes and sizes that are very difficult to change for phantoms. To validate the calibration technique, the response functions and counting efficiencies of a whole-body counter installed in JAERI were evaluated using the simulation and m...

  2. Tax amnesties, justice perceptions, and filing behavior: a simulation study

    OpenAIRE

    Rechberger, Silvia; HARTNER, MARTINA; Kirchler, Erich; Hämmerle, Franziska

    2010-01-01

    A simulation study demonstrates the influence of perceived justice of a tax amnesty on subsequent tax compliance. In addition, it investigates how the amnesty is perceived to serve the punishment objectives retribution (i.e., giving offenders what they “deserve”) and value restoration (i.e., restoring the values violated by tax evasion). Hierarchical regression analysis revealed the expected positive influence of justice on subsequent tax compliance. However, when the influence of punishment ...

  3. BENEFITS OF CPFR AND VMI COLLABORATION STRATEGIES: A SIMULATION STUDY

    OpenAIRE

    Kamalapur, Raj; University of Wisconsin Oshkosh; Lyth, David; Western Michigan University; Houshyar, Azim; Western Michigan University

    2013-01-01

    This study provides managerial insight to pursue Collaborative Planning Forecasting and Replenishment (CPFR) or Vendor Managed Inventory (VMI) strategy for both the retailer and manufacturer under different supply chain settings. Discrete event simulation is used to investigate the cost benefits of CPFR and VMI strategies over Traditional Supply Chain (TSC) in a variable demand environment. The conceptual model is a two-echelon production-inventory system with a manufacturer and a retailer. T...

  4. Simulation study of burning control with transport barrier

    Energy Technology Data Exchange (ETDEWEB)

    Tateishi, Gonta [Interdisciplinary Graduate School of Engineering Sciences, Kyushu University, Kasuga, Fukuoka (Japan); Itoh, Sanae-I.; Yagi, Masayoshi [Kyushu Univ., Fukuoka (Japan). Research Inst. for Applied Mechanics

    2000-07-01

    Dynamics of burning plasmas are studied by use of one dimensional simulation code with current diffusive ballooning mode model. Focusing on the effects of current profile control, burning performance is evaluated. The ohmic plasma is heated by additional heating and ignited state of the plasma is reached. Due to the formation of negative shear, improved confinement is obtained with the L-mode boundary condition. Controlling the external current drive, burning state is sustained longer than 1000 sec. (author)

  5. Studying and simulating transformer configuration to improve power quality

    Directory of Open Access Journals (Sweden)

    Oscar J. Peña Huaringa

    2011-07-01

    Full Text Available This paper presents a study and simulation of transformer configurations to improve power quality; it provides theoretical support based on the expansion of the Fourier series and analysis of symmetrical components. A test system was set up in the laboratory, taking measurements and checking configuration effectiveness in reducing the system’s harmonic content. The configurations were modelled with PSCAD / EMTDC software, using two 6 pulse rectifiers as test loads and two variable speed drives.

  6. Kinetic simulation study of one dimensional collisional bounded plasma

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    A self-consistent kinetic simulation study ofone dimensional collisional bounded plasma is presented.The formation of stable sheath potential is investigated.It is found that mass ratio of electron and ion not onlyaffects the level of sheath potential, but also affectsthe ion temperature of system. It is clarified that the effects of secondaryemission electron on both the total potential dropand the temperature are not important.

  7. Simulation Studies of Bipedal Walking on the Moon and Mars

    Science.gov (United States)

    Yamada, Shin; Ohshima, Hiroshi; Yamaguchi, Tomofumi; Narukawa, Terumasa; Takahashi, Masaki; Hase, Kimitaka; Liu, Meigen; Mukai, Chiaki

    In order to walk upright on the Moon or Mars without falling, a specific walking strategy to account for altered gravitational conditions must be verified. We have therefore been studying changes in the kinematics of walking at different gravitational loads using a body weight suspension system. Our simulation consisted of three gravitational conditions: 1 g (Earth); 1/3 g (Mars); and 1/6 g (the Moon). Surface EMG recordings were taken from the leg muscles of subjects walking on a treadmill. Cadence, stance phase duration, and step length were calculated from the walking velocity and steps. Subsequent experiments revealed that muscle activity and the duration of the double support phase decreased as simulated gravity was reduced. These changes are apparently caused not only by the direct effects of unloading but also by kinematic adaptations to the same. It can be said that humans walk slowly with a shortened stride and elongated stance phase in order to adjust to low gravitational conditions. One major limitation of our study that may have affected walking stability was the fact that the suspension system was fixed to an immovable frame. We have begun further studies using a newer movable body weight suspension system to achieve more realistic simulations.

  8. COMPARATIVE STUDY OF TERTIARY WASTEWATER TREATMENT BY COMPUTER SIMULATION

    Directory of Open Access Journals (Sweden)

    Stefania Iordache

    2010-01-01

    Full Text Available The aim of this work is to asses conditions for implementation of a Biological Nutrient Removal (BNR process in theWastewater Treatment Plant (WWTP of Moreni city (Romania. In order to meet the more increased environmentalregulations, the wastewater treatment plant that was studied, must update the actual treatment process and have tomodernize it. A comparative study was undertaken of the quality of effluents that could be obtained by implementationof biological nutrient removal process like A2/O (Anaerobic/Anoxic/Oxic and VIP (Virginia Plant Initiative aswastewater tertiary treatments. In order to asses the efficiency of the proposed treatment schemata based on the datamonitored at the studied WWTP, it were realized computer models of biological nutrient removal configurations basedon A2/O and VIP process. Computer simulation was realized using a well-known simulator, BioWin by EnviroSimAssociates Ltd. The simulation process allowed to obtain some data that can be used in design of a tertiary treatmentstage at Moreni WWTP, in order to increase the efficiency in operation.

  9. Simulation Study (SimStudy): A Simulation Tool for Engineers and Mission Planners

    Science.gov (United States)

    2013-09-01

    meters of 0.065-inch Zylon Cable Tension Droop 8 The data tables input into the towed target input file for SimStudy are based on the towlines that...are most commonly used for each particular tow. For instance, the TIX-4 is most often towed with 5,000 feet of 0.050-inch diameter Zylon , while the

  10. Comparative Simulation Study on Synchronous Generators Sudden Short Circuits

    Directory of Open Access Journals (Sweden)

    Lucian Lupşa-Tătaru

    2009-01-01

    Full Text Available Although of a great extent in time, the research works directed at studying transients in synchronous generators have not yet provided fully sufficient comparative studies in respect to sudden short circuits of the machine. The present paper puts forward novel and comprehensive process models for dynamic simulation of short circuit faults of initially unloaded synchronous generators, using the generalized d-q-0 mathematical model as starting point in derivation. Distinct from the time-domain analysis, the technique proposed here allows an effective comparative overview by employing a specialized procedure to perform repeated time-domain simulations accompanied by peak values recording for the various circumstances. The time consuming matrix numerical inversion at each step of integration, usually performed when selecting currents as state variables, is eliminated by advancing the process models in a convenient split matrix form that allows the symbolic processing. Also, the computational efficiency is being increased by introducing a set of auxiliary variables common to different state equations. The models derivation is carried out without altering the structural equations of the generalized d-q-0 mathematical model of synchronous generators whilst the simulation results are both compared and discussed in detail.

  11. Leading teams during simulated pediatric emergencies: a pilot study.

    Science.gov (United States)

    Coolen, Ester H; Draaisma, Jos M; den Hamer, Sabien; Loeffen, Jan L

    2015-01-01

    Leadership has been identified as a key variable for the functioning of teams and as one of the main reasons for success or failure of team-based work systems. Pediatricians often function as team leaders in the resuscitation of a critically ill child. However, pediatric residents often report having little opportunity to perform in the role of team leader during residency. In order to gain more insight into leadership skills and behaviors, we classified leadership styles of pediatric residents during simulated emergencies. We conducted a prospective quantitative study to investigate leadership styles used by pediatric residents during simulated emergencies with clinical deterioration of a child at a pediatric ward. Using videotaped scenarios of 48 simulated critical events among 12 residents, we were able to classify verbal and nonverbal communication into different leadership styles according to the situational leadership theory. The coaching style (mean 54.5%, SD 7.8) is the most frequently applied by residents, followed by the directing style (mean 35.6%, SD 4.1). This pattern conforms to the task- and role-related requirements in our scenarios and it also conforms to the concept of situational leadership. We did not find any significant differences in leadership style according to the postgraduate year or scenario content. The model used in this pilot study helps us to gain a better understanding of the development of effective leadership behavior and supports the applicability of situational leadership theory in training leadership skills during residency.

  12. Leading teams during simulated pediatric emergencies: a pilot study

    Science.gov (United States)

    Coolen, Ester H; Draaisma, Jos M; den Hamer, Sabien; Loeffen, Jan L

    2015-01-01

    Purpose Leadership has been identified as a key variable for the functioning of teams and as one of the main reasons for success or failure of team-based work systems. Pediatricians often function as team leaders in the resuscitation of a critically ill child. However, pediatric residents often report having little opportunity to perform in the role of team leader during residency. In order to gain more insight into leadership skills and behaviors, we classified leadership styles of pediatric residents during simulated emergencies. Methods We conducted a prospective quantitative study to investigate leadership styles used by pediatric residents during simulated emergencies with clinical deterioration of a child at a pediatric ward. Using videotaped scenarios of 48 simulated critical events among 12 residents, we were able to classify verbal and nonverbal communication into different leadership styles according to the situational leadership theory. Results The coaching style (mean 54.5%, SD 7.8) is the most frequently applied by residents, followed by the directing style (mean 35.6%, SD 4.1). This pattern conforms to the task- and role-related requirements in our scenarios and it also conforms to the concept of situational leadership. We did not find any significant differences in leadership style according to the postgraduate year or scenario content. Conclusion The model used in this pilot study helps us to gain a better understanding of the development of effective leadership behavior and supports the applicability of situational leadership theory in training leadership skills during residency. PMID:25610010

  13. A Large Eddy Simulation Study for upstream wind energy conditioning

    Science.gov (United States)

    Sharma, V.; Calaf, M.; Parlange, M. B.

    2013-12-01

    The wind energy industry is increasingly focusing on optimal power extraction strategies based on layout design of wind farms and yaw alignment algorithms. Recent field studies by Mikkelsen et al. (Wind Energy, 2013) have explored the possibility of using wind lidar technology installed at hub height to anticipate incoming wind direction and strength for optimizing yaw alignment. In this work we study the benefits of using remote sensing technology for predicting the incoming flow by using large eddy simulations of a wind farm. The wind turbines are modeled using the classic actuator disk concept with rotation, together with a new algorithm that permits the turbines to adapt to varying flow directions. This allows for simulations of a more realistic atmospheric boundary layer driven by a time-varying geostrophic wind. Various simulations are performed to investigate possible improvement in power generation by utilizing upstream data. Specifically, yaw-correction of the wind-turbine is based on spatio-temporally averaged wind values at selected upstream locations. Velocity and turbulence intensity are also considered at those locations. A base case scenario with the yaw alignment varying according to wind data measured at the wind turbine's hub is also used for comparison. This reproduces the present state of the art where wind vanes and cup anemometers installed behind the rotor blades are used for alignment control.

  14. Christiansen Revisited: Rethinking Quantification of Uniformity in Rainfall Simulator Studies

    Science.gov (United States)

    Green, Daniel; Pattison, Ian

    2016-04-01

    Rainfall simulators, whether based within a laboratory or field setting are used extensively within a number of fields of research, including plot-scale runoff, infiltration and erosion studies, irrigation and crop management and scaled investigations into urban flooding. Rainfall simulators offer a number of benefits, including the ability to create regulated and repeatable rainfall characteristics (e.g. intensity, duration, drop size distribution and kinetic energy) without relying on unpredictable natural precipitation regimes. Ensuring and quantifying spatially uniform simulated rainfall across the entirety of the plot area is of particular importance to researchers undertaking rainfall simulation. As a result, numerous studies have focused on the quantification and improvement of uniformity values. Several statistical methods for the assessment of rainfall simulator uniformity have been developed. However, the Christiansen Uniformity Coefficient (CUC) suggested by Christiansen (1942) is most frequently used. Despite this, there is no set methodology and researchers can adapt or alter factors such as the quantity, as well as the spacing, distance and location of the measuring beakers used to derive CUC values. Because CUC values are highly sensitive to the resolution of the data, i.e. the number of observations taken, many densely distributed measuring containers subjected to the same experimental conditions may generate a significantly lower CUC value than fewer, more sparsely distributed measuring containers. Thus, the simulated rainfall under a higher resolution sampling method could appear less uniform than when using a coarser resolution sampling method, despite being derived from the same initial rainfall conditions. Expressing entire plot uniformity as a single, simplified percentage value disregards valuable qualitative information about plot uniformity, such as the small-scale spatial distribution of rainfall over the plot surface and whether these

  15. Numerical studies towards practical large-eddy simulation

    Institute of Scientific and Technical Information of China (English)

    J. Boudet; J. Caro; L. Shao; E. Lévêque

    2007-01-01

    Large-eddy simulation developments and validations are presented for an improved simulation of turbulent internal flows. Numerical methods are proposed according to two competing criteria: numerical qualities (precision and spectral characteristics), and adaptability to complex configurations. First, methods are tested on academic test-cases, in order to abridge with fundamental studies. Consistent results are obtained using adaptable finite volume method, with higher order advection fluxes, implicit grid filtering and "low-cost" shear-improved Smagorinsky model. This analysis particularly focuses on mean flow, fluctuations, two-point correlations and spectra.Moreover, it is shown that exponential averaging is a promising tool for LES implementation in complex geometry with deterministic unsteadiness. Finally, adaptability of the method is demonstrated by application to a configuration representative of blade-tip clearance flow in a turbomachine.

  16. AUV-Based Plume Tracking: A Simulation Study

    Directory of Open Access Journals (Sweden)

    Awantha Jayasiri

    2016-01-01

    Full Text Available This paper presents a simulation study of an autonomous underwater vehicle (AUV navigation system operating in a GPS-denied environment. The AUV navigation method makes use of underwater transponder positioning and requires only one transponder. A multirate unscented Kalman filter is used to determine the AUV orientation and position by fusing high-rate sensor data and low-rate information. The paper also proposes a gradient-based, efficient, and adaptive novel algorithm for plume boundary tracking missions. The algorithm follows a centralized approach and it includes path optimization features based on gradient information. The proposed algorithm is implemented in simulation on the AUV-based navigation system and successful boundary tracking results are obtained.

  17. Simulation study of element plastic migration from radiometric measurements

    Energy Technology Data Exchange (ETDEWEB)

    Rosa, Faena M.L.; Manzoli, Jose Eduardo; Saiki, Mitiko [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Soares, Eufemia Paez [Escola SENAI Fundacao Zerrenner, Sao Paulo, SP (Brazil)], E-mail: eufemia@sp.senai.br

    2007-07-01

    Element migration from plastic packaging to either foodstuffs or medicine is a serious public health. Many conventional experimental techniques such as chromatography-mass spectrometry, atomic absorption spectroscopy, inductively coupled plasma spectroscopy or calorimetric methods are used to measure total and specific migration of components from plastic packaging. The radiometric method is also used to measure the element migration. In this study a numerical technique was employed to simulate the experimental migration results obtained from measurements of elements from dairy product polymeric packages into 3% acetic acid solution which is a normative food simulant. This numerical technique can be used as complementary tool for the experimental measurements, allowing for a better understanding of the diffusion process and to estimate element migration situations not experimentally measured. (author)

  18. Simulation Study on Fuzzy Control of Rotary Steering Drilling Trajectory

    Directory of Open Access Journals (Sweden)

    Xue Qi-Long

    2012-07-01

    Full Text Available The purpose of this study is to establish a control method to make borehole trajectory smoother. Considering that the complexity of rotary steerable drilling trajectory control and uncertainty of underground work, analysis of the deficiencies for the traditional trajectory control and the rotary steerable drilling trajectory deviation vector control theory, introduced the concept of "trend Angle", combined with the deviation vector as joint control variables, using fuzzy control algorithm that established of rotary steerable drilling trajectory fuzzy control model. Designed the fuzzy controller using Matlab/Simulink toolbox and dynamic simulation analysis for the fuzzy control systems, simulation results show that the designed fuzzy controller can effectively track the well path design, has a strong adaptability and control results is better than traditional PID control method.

  19. Study on the Teaching System of ERP Sand Table Simulation

    Directory of Open Access Journals (Sweden)

    He Xiaolan

    2013-08-01

    Full Text Available The aim of the study is to improve the practical ability of students in management major. Nowadays, the teaching ways of management course are limited into theoretical teaching. However, such teaching ways cannot meet the practical demand of the students in management major since the major demands students should be practical and theoretical. How to improve the practical ability of students in management major has been an emergent problem need to be solved for universities. First, the brief introduction and characteristics of the teaching system of ERP sand table simulation was made. Then the design of the teaching system of ERP sand table simulation was put forward, which included the design of teaching organization, the design of teaching contents and the design of teaching methods. Through the new teaching method, students can improve their practical capability since they can experience the practice of firm’s operation

  20. Simulation study of secondary electron images in scanning ion microscopy

    CERN Document Server

    Ohya, K

    2003-01-01

    The target atomic number, Z sub 2 , dependence of secondary electron yield is simulated by applying a Monte Carlo code for 17 species of metals bombarded by Ga ions and electrons in order to study the contrast difference between scanning ion microscopes (SIM) and scanning electron microscopes (SEM). In addition to the remarkable reversal of the Z sub 2 dependence between the Ga ion and electron bombardment, a fine structure, which is correlated to the density of the conduction band electrons in the metal, is calculated for both. The brightness changes of the secondary electron images in SIM and SEM are simulated using Au and Al surfaces adjacent to each other. The results indicate that the image contrast in SIM is much more sensitive to the material species and is clearer than that for SEM. The origin of the difference between SIM and SEM comes from the difference in the lateral distribution of secondary electrons excited within the escape depth.

  1. Simulation studies of high-latitude magnetospheric boundary dynamics

    Institute of Scientific and Technical Information of China (English)

    PU; Zuyin; SHI; Quanqi; XIAO; Chijie; FU; Suiyan; ZHANG; Hu

    2004-01-01

    Magnetic reconnection at the high-latitude magnetopause is studied using 2.5-dimensional Hail-MHD simulation. Concentric flow vortices and magnetic islands appear when both Hall effect and sheared flow are considered. Plasma mixing across the magnetopause occurs in the presence of the flow vortices. Reconnected structure generated in the vicinity of the subsolar point changes its geometry with increasing flow shear while moving to high latitudes. In the presence of flow shear, with the Hail-MHD reconnection a higher reconnection rate than with the traditional MHD is obtained. The out-of-plane components of flow and magnetic field produced by the Hall current are redistributed under the action of the flow shear, which makes the plasma transport across the boundaries more complicated. The simulation results provide some help in understanding the dynamic processes at the high latitude magnetopause.

  2. A Quantitative Study of Simulated Bicuspid Aortic Valves

    Science.gov (United States)

    Szeto, Kai; Nguyen, Tran; Rodriguez, Javier; Pastuszko, Peter; Nigam, Vishal; Lasheras, Juan

    2010-11-01

    Previous studies have shown that congentially bicuspid aortic valves develop degenerative diseases earlier than the standard trileaflet, but the causes are not well understood. It has been hypothesized that the asymmetrical flow patterns and turbulence found in the bileaflet valves together with abnormally high levels of strain may result in an early thickening and eventually calcification and stenosis. Central to this hypothesis is the need for a precise quantification of the differences in the strain rate levels between bileaflets and trileaflet valves. We present here some in-vitro dynamic measurements of the spatial variation of the strain rate in pig aortic vales conducted in a left ventricular heart flow simulator device. We measure the strain rate of each leaflet during the whole cardiac cycle using phase-locked stereoscopic three-dimensional image surface reconstruction techniques. The bicuspid case is simulated by surgically stitching two of the leaflets in a normal valve.

  3. Simulation and experimental study of resin flow in fibre fabrics

    Science.gov (United States)

    Yan, Fei; Yan, Shilin; Li, Yongjing

    2017-06-01

    Liquid Composite Moulding (LCM) is gradually becoming the most competitive manufacturing technology for producing large composite parts with complex geometry with high quality and low cost. These parts include those for airplanes, wind turbine blades and automobile components. Fibre fabrics in liquid composite moulding can be considered as dual-scale porous media. In different gap scales, an unsaturated flow is produced during the mould filling process. This particular flow behaviour deviates from the traditional Darcy’s law, which is used to calculate the filling pressure and will cause errors. According to sink theory, the unsaturated flow characteristics of this dual-scale porous media were studied in this paper, and a FEM solution program was developed. The results showed that the pressure curves against the position which simulated by sink functions were departure from the position of traditional theory. In addition, the simulation results of partially-saturated region were consistent with the experimental data.

  4. Plasma environment of Titan: a 3-D hybrid simulation study

    Directory of Open Access Journals (Sweden)

    S. Simon

    2006-05-01

    Full Text Available Titan possesses a dense atmosphere, consisting mainly of molecular nitrogen. Titan's orbit is located within the Saturnian magnetosphere most of the time, where the corotating plasma flow is super-Alfvénic, yet subsonic and submagnetosonic. Since Titan does not possess a significant intrinsic magnetic field, the incident plasma interacts directly with the atmosphere and ionosphere. Due to the characteristic length scales of the interaction region being comparable to the ion gyroradii in the vicinity of Titan, magnetohydrodynamic models can only offer a rough description of Titan's interaction with the corotating magnetospheric plasma flow. For this reason, Titan's plasma environment has been studied by using a 3-D hybrid simulation code, treating the electrons as a massless, charge-neutralizing fluid, whereas a completely kinetic approach is used to cover ion dynamics. The calculations are performed on a curvilinear simulation grid which is adapted to the spherical geometry of the obstacle. In the model, Titan's dayside ionosphere is mainly generated by solar UV radiation; hence, the local ion production rate depends on the solar zenith angle. Because the Titan interaction features the possibility of having the densest ionosphere located on a face not aligned with the ram flow of the magnetospheric plasma, a variety of different scenarios can be studied. The simulations show the formation of a strong magnetic draping pattern and an extended pick-up region, being highly asymmetric with respect to the direction of the convective electric field. In general, the mechanism giving rise to these structures exhibits similarities to the interaction of the ionospheres of Mars and Venus with the supersonic solar wind. The simulation results are in agreement with data from recent Cassini flybys.

  5. Leading teams during simulated pediatric emergencies: a pilot study

    Directory of Open Access Journals (Sweden)

    Coolen EH

    2015-01-01

    Full Text Available Ester H Coolen,1 Jos M Draaisma,2 Sabien den Hamer,3 Jan L Loeffen2 1Department of Pediatric Surgery, Amalia Children’s Hospital, Radboud University Medical Center, 2Department of Pediatrics, Amalia Children’s Hospital, Radboud University Medical Center, 3Department of Communication Science, Radboud University, Nijmegen, the Netherlands Purpose: Leadership has been identified as a key variable for the functioning of teams and as one of the main reasons for success or failure of team-based work systems. Pediatricians often function as team leaders in the resuscitation of a critically ill child. However, pediatric residents often report having little opportunity to perform in the role of team leader during residency. In order to gain more insight into leadership skills and behaviors, we classified leadership styles of pediatric residents during simulated emergencies. Methods: We conducted a prospective quantitative study to investigate leadership styles used by pediatric residents during simulated emergencies with clinical deterioration of a child at a pediatric ward. Using videotaped scenarios of 48 simulated critical events among 12 residents, we were able to classify verbal and nonverbal communication into different leadership styles according to the situational leadership theory. Results: The coaching style (mean 54.5%, SD 7.8 is the most frequently applied by residents, followed by the directing style (mean 35.6%, SD 4.1. This pattern conforms to the task- and role-related requirements in our scenarios and it also conforms to the concept of situational leadership. We did not find any significant differences in leadership style according to the postgraduate year or scenario content. Conclusion: The model used in this pilot study helps us to gain a better understanding of the development of effective leadership behavior and supports the applicability of situational leadership theory in training leadership skills during residency. Keywords

  6. Study on advancement of in vivo counting using mathematical simulation

    Energy Technology Data Exchange (ETDEWEB)

    Kinase, Sakae [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2003-05-01

    To obtain an assessment of the committed effective dose, individual monitoring for the estimation of intakes of radionuclides is required. For individual monitoring of exposure to intakes of radionuclides, direct measurement of radionuclides in the body - in vivo counting- is very useful. To advance in a precision in vivo counting which fulfills the requirements of ICRP 1990 recommendations, some problems, such as the investigation of uncertainties in estimates of body burdens by in vivo counting, and the selection of the way to improve the precision, have been studied. In the present study, a calibration technique for in vivo counting application using Monte Carlo simulation was developed. The advantage of the technique is that counting efficiency can be obtained for various shapes and sizes that are very difficult to change for phantoms. To validate the calibration technique, the response functions and counting efficiencies of a whole-body counter installed in JAERI were evaluated using the simulation and measurements. Consequently, the calculations are in good agreement with the measurements. The method for the determination of counting efficiency curves as a function of energy was developed using the present technique and a physiques correction equation was derived from the relationship between parameters of correction factor and counting efficiencies of the JAERI whole-body counter. The uncertainties in body burdens of {sup 137}Cs estimated with the JAERI whole-body counter were also investigated using the Monte Carlo simulation and measurements. It was found that the uncertainties of body burdens estimated with the whole-body counter are strongly dependent on various sources of uncertainty such as radioactivity distribution within the body and counting statistics. Furthermore, the evaluation method of the peak efficiencies of a Ge semi-conductor detector was developed by Monte Carlo simulation for optimum arrangement of Ge semi-conductor detectors for

  7. Simulation

    DEFF Research Database (Denmark)

    Gould, Derek A; Chalmers, Nicholas; Johnson, Sheena J

    2012-01-01

    Recognition of the many limitations of traditional apprenticeship training is driving new approaches to learning medical procedural skills. Among simulation technologies and methods available today, computer-based systems are topical and bring the benefits of automated, repeatable, and reliable p...... performance assessments. Human factors research is central to simulator model development that is relevant to real-world imaging-guided interventional tasks and to the credentialing programs in which it would be used.......Recognition of the many limitations of traditional apprenticeship training is driving new approaches to learning medical procedural skills. Among simulation technologies and methods available today, computer-based systems are topical and bring the benefits of automated, repeatable, and reliable...

  8. Using DOE Commercial Reference Buildings for Simulation Studies: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Field, K.; Deru, M.; Studer, D.

    2010-08-01

    The U.S. Department of Energy developed 256 EnergyPlus models for use in studies that aim to characterize about 70% of the U.S. commercial building stock. Sixteen building types - including restaurants, health care, schools, offices, supermarkets, retail, lodging, and warehouses - are modeled across 16 cities to represent the diversity of U.S. climate zones. Weighting factors have been developed to combine the models in proportions similar to those of the McGraw-Hill Construction Projects Starts Database for 2003-2007. This paper reviews the development and contents of these models and their applications in simulation studies.

  9. Computer simulation study of hexokinase II from Ehrlich ascites cells.

    Science.gov (United States)

    Garfinkel, L

    1975-02-21

    A study of the mechanism of hexokinase II from ascites cells the effects of its binding to mitochondrial membranes has been carried out by computer simulation. This is based on experimental data of Kosow and Rose and of Gumaa and McLean, and the theoretical methods of cleveland. For the soluble enzyme the mechanism is random with ternary produce-inhibition complexes; when bound to mitochondria, the mechanism becomes ordered-on, random-off, as the binding of ATP to the free enzymes becomes negligibly slow. The requirements of experimental data for mechanistic studies are discussed.

  10. Complex coacervation: A field theoretic simulation study of polyelectrolyte complexation

    Science.gov (United States)

    Lee, Jonghoon; Popov, Yuri O.; Fredrickson, Glenn H.

    2008-06-01

    Using the complex Langevin sampling strategy, field theoretic simulations are performed to study the equilibrium phase behavior and structure of symmetric polycation-polyanion mixtures without salt in good solvents. Static structure factors for the segment density and charge density are calculated and used to study the role of fluctuations in the electrostatic and chemical potential fields beyond the random phase approximation. We specifically focus on the role of charge density and molecular weight on the structure and complexation behavior of polycation-polyanion solutions. A demixing phase transition to form a ``complex coacervate'' is observed in strongly charged systems, and the corresponding spinodal and binodal boundaries of the phase diagram are investigated.

  11. Study on corrosion simulation device for marine structural steel

    Indian Academy of Sciences (India)

    Hou Baorong; Xiang Bin

    2003-04-01

    A corrosion simulation device was studied using offshore long scale hanging specimens. An Ni–Cu–P steel specimen was studied by analysing its corrosion products and corrosion types. The appearance of the samples and the surface of the metallic substrate after the removal of the rust layer produced by these two methods were observed and compared after 470 days of exposure. The phase structure of the corrosion products under different marine environments were analysed and compared. It further indicated good correlation between the electrically connected hanging specimen method and the long scale hanging specimen method.

  12. Simulation Study on Quantum Capacitances of Graphene Nanoribbon VLSI Interconnects

    Science.gov (United States)

    Dutta, Arin; Rahman, Silvia; Nandy, Turja; Mahmood, Zahid Hasan

    2016-03-01

    In this paper, study on the capacitive effects of Graphene nanoribbon (GNR) in VLSI interconnect has been studied as a function of GNR width, Fermi function and gate voltage. The quantum capacitance of GNR has been simulated in terms of Fermi function for three different values of insulator thickness — 1.5nm, 2nm and 2.5nm. After that, quantum capacitance is studied in both degenerate and nondegenerate region with respect to Fermi function and gate voltage of range 1-5V. Then, the total capacitance of GNR is studied as a function of gate voltage of -2-5V range at degenerate and nondegenerate regions, where width of GNR is considered 4nm. Finally, the total capacitance of GNR is studied in both regions with varying GNR width, considering fixed gate voltage of 3V. After analyzing these simulations, it has been found that GNR in degenerate region shows nearly steady capacitance under a certain applied gate voltage.

  13. Energy flux simulation in heterogeneous cropland - a two year study

    Science.gov (United States)

    Klein, Christian; Thieme, Christoph; Biernath, Christian; Heinlein, Florian; Priesack, Eckart

    2016-04-01

    Recent studies show that uncertainties in regional and global climate and weather simulations are partly due to inadequate descriptions of the energy flux exchanges between the land surface and the atmosphere [Stainforth et al. 2005]. One major shortcoming is the limitation of the grid-cell resolution, which is recommended to be about at least 3x3 km² in most models due to limitations in the model physics. To represent each individual grid cell most models select one dominant soil type and one dominant land use type. This resolution, however, is often too coarse in regions where the spatial heterogeneity of soil and land use types are high, e.g. in Central Europe. The relevance of vegetation (e.g. crops), ground cover, and soil properties to the moisture and energy exchanges between the land surface and the atmosphere is well known [McPherson 2007], but the impact of vegetation growth dynamics on energy fluxes is only partly understood [Gayler et al. 2014]. An elegant method to avoid the shortcoming of grid cell resolution is the so called mosaic approach. This approach is part of the recently developed ecosystem model framework Expert-N [Biernath et al. 2013] . The aim of this study was to analyze the impact of the characteristics of five managed field plots, planted with winter wheat, potato and maize on the near surface soil moistures and on the near surface energy flux exchanges of the soil-plant-atmosphere interface. The simulated energy fluxes were compared with eddy flux tower measurements between the respective fields at the research farm Scheyern, North-West of Munich, Germany. To perform these simulations, we coupled the ecosystem model Expert-N to an analytical footprint model [Mauder & Foken 2011] . The coupled model system has the ability to calculate the mixing ratio of the surface energy fluxes at a given point within one grid cell (in this case at the flux tower between the two fields). The approach accounts for the temporarily and spatially

  14. Experimental study and simulations of infiltration in evapotranspiration landfill covers

    Institute of Scientific and Technical Information of China (English)

    Wen-xian ZHANG; Zhan-yu ZHANG; Kang WANG

    2009-01-01

    Various cover systems have been designed for landfill sites in order to minimize infiltration (percolation) into the underlying waste.This study evaluated the soil water balance performance of evapotranspiration covers (ET covers) and simulated percolation in the systems using the active region model (ARM).Experiments were conducted to measure water flow processes and water balance components in a bare soil cover and different ET covers.Results showed that vegetation played a critical role in controlling the water balance of the ET covers.In soil profiles of 60-cm depth with and without vegetation cover,the maximum soil water storage capacities were 97.2 mm and 62.8 mm,respectively.The percolation amount in the bare soil was 2.1 times that in the vegetation-covered soil.The ARM simulated percolation more accurately than the continuum model because it considered preferential flow.Numerical simulation results also indicated that using the ET cover system was an effective way of removing water through evapotranspiration,thus reducing percolation.

  15. Experimental study and simulations of infiltration in evapotranspiration landfill covers

    Directory of Open Access Journals (Sweden)

    Wen-xian ZHANG

    2009-09-01

    Full Text Available Various cover systems have been designed for landfill sites in order to minimize infiltration (percolation into the underlying waste. This study evaluated the soil water balance performance of evapotranspiration covers (ET covers and simulated percolation in the systems using the active region model (ARM. Experiments were conducted to measure water flow processes and water balance components in a bare soil cover and different ET covers. Results showed that vegetation played a critical role in controlling the water balance of the ET covers. In soil profiles of 60-cm depth with and without vegetation cover, the maximum soil water storage capacities were 97.2 mm and 62.8 mm, respectively. The percolation amount in the bare soil was 2.1 times that in the vegetation-covered soil. The ARM simulated percolation more accurately than the continuum model because it considered preferential flow. Numerical simulation results also indicated that using the ET cover system was an effective way of removing water through evapotranspiration, thus reducing percolation.

  16. Simulation Studies of the Backscattering Signal in HSRL Technique

    CERN Document Server

    Georgakopoulou, Angelika

    2012-01-01

    The technique of High Spectral Resolution Lidar (HSRL) for atmospheric monitoring allows the determination of the aerosol to molecular ratio and can be used in UHECR Observatories using air fluorescence telescopes. By this technique a more accurate estimate of the Cherenkov radiation superimposed to the fluorescence signal can be achieved. A laboratory setup was developed to determine the backscattering coefficients using microparticles diluted in water and diffusion interfaces. In this setup we used a CW SLM laser at 532 nm and a 250 mm Newtonian telescope. Simulations of the above experimental configuration have been made using Scatlab\\c{opyright}, FINESSE\\c{opyright} 0.99.8 and MATLAB\\c{opyright} and are presented in this work. We compare the simulated 2-dimensional Fabry-Perot fringe images of the backscattering signal recorded in the CCD sensor with that of experimental ones. Additionally, we simulated the backscattering of the laser beam by the atmosphere at a height of 2000 m and we have studied the in...

  17. Empirical study of simulated two-planet microlensing events

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, Wei; Gould, Andrew; Penny, Matthew [Department of Astronomy, The Ohio State University, 140 West 18th Avenue, Columbus, OH 43210 (United States); Mao, Shude [National Astronomical Observatories, Chinese Academy of Sciences, 20A Datun Road, Chaoyang District, Beijing 100012 (China); Gendron, Rieul, E-mail: weizhu@astronomy.ohio-state.edu [Jodrell Bank Centre for Astrophysics, University of Manchester, Alan Turing Building, Manchester M13 9PL (United Kingdom)

    2014-10-10

    We undertake the first study of two-planet microlensing models recovered from simulations of microlensing events generated by realistic multiplanet systems in which 292 planetary events, including 16 two-planet events, were detected from 6690 simulated light curves. We find that when two planets are recovered, their parameters are usually close to those of the two planets in the system most responsible for the perturbations. However, in 1 of the 16 examples, the apparent mass of both detected planets was more than doubled by the unmodeled influence of a third, massive planet. This fraction is larger than but statistically consistent with the roughly 1.5% rate of serious mass errors due to unmodeled planetary companions for the 274 cases from the same simulation in which a single planet is recovered. We conjecture that an analogous effect due to unmodeled stellar companions may occur more frequently. For 7 out of 23 cases in which two planets in the system would have been detected separately, only one planet was recovered because the perturbations due to the two planets had similar forms. This is a small fraction (7/274) of all recovered single-planet models, but almost a third of all events that might plausibly have led to two-planet models. Still, in these cases, the recovered planet tends to have parameters similar to one of the two real planets most responsible for the anomaly.

  18. Experiment and Simulation Study on the Amorphous Silicon Photovoltaic Walls

    Directory of Open Access Journals (Sweden)

    Wenjie Zhang

    2014-01-01

    Full Text Available Based on comparative study on two amorphous silicon photovoltaic walls (a-Si PV walls, the temperature distribution and the instant power were tested; and with EnergyPlus software, similar models of the walls were built to simulate annual power generation and air conditioning load. On typical sunshine day, the corresponding position temperature of nonventilated PV wall was generally 0.5~1.5°C higher than that of ventilated one, while the power generation was 0.2%~0.4% lower, which was consistent with the simulation results with a difference of 0.41% in annual energy output. As simulation results, in summer, comparing the PV walls with normal wall, the heat per unit area of these two photovoltaic walls was 5.25 kWh/m2 (nonventilated and 0.67 kWh/m2 (ventilated higher, respectively. But in winter the heat loss of nonventilated one was smaller, while ventilated PV wall was similar to normal wall. To annual energy consumption of heating and cooling, the building with ventilated PV wall and normal wall was also similar but slightly better than nonventilated one. Therefore, it is inferred that, at low latitudes, such as Zhuhai, China, air gap ventilation is suitable, while the length to thickness ratio of the air gap needs to be taken into account.

  19. Methanol adsorption studies of electrified ACF by MD simulations

    Institute of Scientific and Technical Information of China (English)

    LIANG Shiqiang; XU Jingzhong

    2004-01-01

    In order to clarify whether static electricity can impose a control on physical adsorption of polar adsorbates, MD simulations were carried out to study the adsorption/desorption behavior of methanol in the nanopores of electrified activated carbon fiber (ACF). Some special phenomena were observed from the MD simulations for methanol adsorption in a mesopore of electrified ACF. For example it takes a shorter time for the adsorbates to reach the adsorption sites on the mesopore wall, the liquid-like methanol is highly condensed, the methanol molecules have a unique distribution of space orientation, and the total energy of equilibrium state dropped a lot. These phenomena indicate the static electricity reinforced the interaction between the polar methanol and the electrified ACF, so that the intensity, stability and regularity of adsorption were increased, and thus we predict that the adsorption capacity will be increased and the adsorption process will be accelerated. When adsorption equilibrium was reached at room temperature, eliminated the electric charges and heated the system, the desorption tendency was evidently observed from our simulations at 60℃ or so.

  20. Simulation study of water and sugar dynamics in supercooled mixtures

    Science.gov (United States)

    Molinero, Valeria; Cagin, Tahir; Goddard, William A.

    2003-03-01

    Water dynamics in concentrated carbohydrate solutions is of utmost importance in food and pharmaceutical technology, where low water mobility is desirable to slow down chemical degradation and preserve biomolecules. We have studied the microscopic mechanism of water diffusion in binary and polydisperse malto-oligosaccharides and water mixtures by means of molecular dynamics simulations. The computations were performed with a coarse grain model (M3B), derived from atomistic simulations of water and malto-oligosaccharides. The use of the M3B model permits simulations of the order of 0.1 microsecond, thus allowing us to explore water dynamics from the liquid to the deep supercooled regime. The dynamics of water confined in the sugar matrix is slowed down with respect to bulk water. We found that at low moisture content and low temperature, ranslational diffusion of water and glucose rotation proceed through a hopping-diffusion mechanism. Moreover, we found water mobility to be heterogeneous: there is a broad distribution of time scales for different water molecules in the mixtures. We discuss whether there is a relationship between the heterogeneous structure of these mixtures in the sub-nanometer scale and the heterogeneous dynamics of water molecules.

  1. FES-Assisted Walking with Spring Brake Orthosis: Simulation Studies

    Directory of Open Access Journals (Sweden)

    R. Jailani

    2011-01-01

    Full Text Available This paper presents a simulation of bipedal locomotion to generate stimulation pulses for activating muscles for paraplegic walking with wheel walker using functional electrical stimulation (FES with spring brake orthosis (SBO. A new methodology for paraplegic gait, based on exploiting natural dynamics of human gait, is introduced. The work is a first effort towards restoring natural like swing phase in paraplegic gait through a new hybrid orthosis, referred to as spring brake orthosis (SBO. This mechanism simplifies the control task and results in smooth motion and more-natural like trajectory produced by the flexion reflex for gait in spinal cord injured subjects. SBO can eliminate reliance on the withdrawal reflex and foot-ground clearance without extra upper body effort. The stored energy in the spring of SBO is used to replace stimulation pulses in knee flexion and reduce total required torque for the paraplegic walking with wheel walker. The study is carried out with a model of humanoid with wheel walker using the Visual Nastran (Vn4D dynamic simulation software. Stimulated muscle model of quadriceps is developed for knee extension. Fuzzy logic control (FLC is developed in Matlab/Simulink to regulate the muscle stimulation pulse-width required to drive FES-assisted walking gait and the computed motion is visualised in graphic animation from Vn4D. The simulation results show that SBO can be successfully used with FES for paraplegic walking with wheel walker with all the advantages discussed over the current hybrid orthoses available.

  2. Experimental and simulation study of capacitively coupled electronegative discharges

    Science.gov (United States)

    Derzsi, Aranka

    2016-09-01

    The application of tailored voltage waveforms, generated by using multiple harmonics of a base frequency, for the excitation of capacitive RF discharges has been recently introduced as a new method to control the ion flux and ion energy distribution at the electrodes. In plasma processing of surfaces complex mixtures of electronegative, reactive gases (e.g. CF4, O2) are usually required. Therefore, the question of whether this new approach to control ion properties can be applied efficiently to such systems is of exceptional importance. Here the electron heating and ionization dynamics, the possibilities and limitations of the efficient control of plasma parameters by voltage waveform tailoring in low-pressure capacitively coupled electronegative discharges are presented. The focus is on geometrically symmetric O2 plasmas, which are investigated by PIC/MCC simulations and experimental methods. O2 discharges driven by impulse-type and sawtooth-type voltage waveforms composed of a maximum of four consecutive harmonics are studied. Experimental results on the dc self-bias voltage, as well as the spatiotemporal distribution of the plasma emission are compared with simulation data for a wide range of operating conditions (fundamental driving frequencies of 5 MHz - 15 MHz, at pressures of 50 mTorr - 700 mTorr). Transitions between electron power absorption due to sheath expansion and the drift-ambipolar mode were induced both by changing the number of harmonics or by changing the gas pressure. A good agreement between simulation and experiment is found, which shows that the collision-reaction model for O2 discharges underlying the simulations describes reasonably the complicated chemistry of oxygen plasmas. An investigation of the dependence of the discharge characteristics on the surface destruction coefficient of the O2(a1Δg) singlet metastable molecules revealed the crucial role of these species, which strongly affects the negative ion balance of the plasma.

  3. Simulation Based Studies in Software Engineering: A Matter of Validity

    Directory of Open Access Journals (Sweden)

    Breno Bernard Nicolau de França

    2015-04-01

    Full Text Available Despite the possible lack of validity when compared with other science areas, Simulation-Based Studies (SBS in Software Engineering (SE have supported the achievement of some results in the field. However, as it happens with any other sort of experimental study, it is important to identify and deal with threats to validity aiming at increasing their strength and reinforcing results confidence. OBJECTIVE: To identify potential threats to SBS validity in SE and suggest ways to mitigate them. METHOD: To apply qualitative analysis in a dataset resulted from the aggregation of data from a quasi-systematic literature review combined with ad-hoc surveyed information regarding other science areas. RESULTS: The analysis of data extracted from 15 technical papers allowed the identification and classification of 28 different threats to validity concerned with SBS in SE according Cook and Campbell’s categories. Besides, 12 verification and validation procedures applicable to SBS were also analyzed and organized due to their ability to detect these threats to validity. These results were used to make available an improved set of guidelines regarding the planning and reporting of SBS in SE. CONCLUSIONS: Simulation based studies add different threats to validity when compared with traditional studies. They are not well observed and therefore, it is not easy to identify and mitigate all of them without explicit guidance, as the one depicted in this paper.

  4. Operationalising elaboration theory for simulation instruction design: a Delphi study.

    Science.gov (United States)

    Haji, Faizal A; Khan, Rabia; Regehr, Glenn; Ng, Gary; de Ribaupierre, Sandrine; Dubrowski, Adam

    2015-06-01

    The aim of this study was to assess the feasibility of incorporating the Delphi process within the simplifying conditions method (SCM) described in elaboration theory (ET) to identify conditions impacting the complexity of procedural skills for novice learners. We generated an initial list of conditions impacting the complexity of lumbar puncture (LP) from key informant interviews (n = 5) and a literature review. Eighteen clinician-educators from six different medical specialties were subsequently recruited as expert panellists. Over three Delphi rounds, these panellists rated: (i) their agreement with the inclusion of the simple version of the conditions in a representative ('epitome') training scenario, and (ii) how much the inverse (complex) version increases LP complexity for a novice. Cronbach's α-values were used to assess inter-rater agreement. All panellists completed Rounds 1 and 2 of the survey and 17 completed Round 3. In Round 1, Cronbach's α-values were 0.89 and 0.94 for conditions that simplify and increase LP complexity, respectively; both values increased to 0.98 in Rounds 2 and 3. With the exception of 'high CSF (cerebral spinal fluid) pressure', panellists agreed with the inclusion of all conditions in the simplest (epitome) training scenario. Panellists rated patient movement, spinal anatomy, patient cooperativeness, body habitus, and the presence or absence of an experienced assistant as having the greatest impact on the complexity of LP. This study demonstrated the feasibility of using expert consensus to establish conditions impacting the complexity of procedural skills, and the benefits of incorporating the Delphi method into the SCM. These data can be used to develop and sequence simulation scenarios in a progressively challenging manner. If the theorised learning gains associated with ET are realised, the methods described in this study may be applied to the design of simulation training for other procedural and non-procedural skills

  5. Cutoff sample size estimation for survival data: a simulation study

    OpenAIRE

    2014-01-01

    This thesis demonstrates the possible cutoff sample size point that balances goodness of es-timation and study expenditure by a practical cancer case. As it is crucial to determine the sample size in designing an experiment, researchers attempt to find the suitable sample size that achieves desired power and budget efficiency at the same time. The thesis shows how simulation can be used for sample size and precision calculations with survival data. The pre-sentation concentrates on the simula...

  6. Simulation study of the parallax effect of gaseous detectors

    Institute of Scientific and Technical Information of China (English)

    WANG Xiao-Hu; WU Jun-Long; LI Jiang-Bo

    2012-01-01

    A simulation study of the parallax effect of gaseous detectors using the Garfield program is reported.A method that mainly uses non-uniform cathode potentials to reduce the parallax error of planar type gas detectors is described.By applying it to MWPC and Micro-pattern gas detectors,the method reduces the parallax broadening with very good results.For a 13° incidence track,the width (FWHM) of the parallax broadening is reduced to less than 20% of the normal one after using the special cathode potentials.

  7. M3D project for simulation studies of plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Park, W.; Belova, E.V.; Fu, G.Y. [Princeton Univ., NJ (United States). Plasma Physics Lab.; Strauss, H.R. [New York Univ., NY (United States); Sugiyama, L.E. [Massachusetts Inst. of Tech., Cambridge, MA (United States)

    1998-12-31

    The M3D (Multi-level 3D) project carries out simulation studies of plasmas of various regimes using multi-levels of physics, geometry, and mesh schemes in one code package. This paper and papers by Strauss, Sugiyama, and Belova in this workshop describe the project, and present examples of current applications. The currently available physics models of the M3D project are MHD, two-fluids, gyrokinetic hot particle/MHD hybrid, and gyrokinetic particle ion/two-fluid hybrid models. The code can be run with both structured and unstructured meshes.

  8. The study of Anisotropic Flows at LHC with purturbative simulation

    CERN Document Server

    Shin, Ghi R

    2013-01-01

    We study the harmonic flows, for example, the directed, elliptic, third and fourth flow of the system of partons formed just after relativistic heavy ion collisions. We calculate the minijets produced during the primary collisions using standard parton distributions for the incomming projectile and target nucleus. We solve the Boltzmann equations of motion for the system of minijets by Monte Carlo method within only the perturbative sector. Based on the flow data calculated, we conclude the simulation can not explain the experimental results at RHIC and LHC so that the nonperturbative sector plays much more important roles even from the earliest stage of heavy ion collisions.

  9. Designing artificial enzymes from scratch: Experimental study and mesoscale simulation

    Science.gov (United States)

    Komarov, Pavel V.; Zaborina, Olga E.; Klimova, Tamara P.; Lozinsky, Vladimir I.; Khalatur, Pavel G.; Khokhlov, Alexey R.

    2016-09-01

    We present a new concept for designing biomimetic analogs of enzymatic proteins; these analogs are based on the synthetic protein-like copolymers. α-Chymotrypsin is used as a prototype of the artificial catalyst. Our experimental study shows that in the course of free radical copolymerization of hydrophobic and hydrophilic monomers the target globular nanostructures of a "core-shell" morphology appear in a selective solvent. Using a mesoscale computer simulation, we show that the protein-like globules can have a large number of catalytic centers located at the hydrophobic core/hydrophilic shell interface.

  10. Study on Simulation of Machining Errors Caused by Cutting Force

    Institute of Scientific and Technical Information of China (English)

    SHAO Xiaodong; ZHANG Liu; LIN Zhaoxu

    2006-01-01

    Machining errors caused by cutting force are studied in this paper, and an algorithm to simulate errors is putted forward. In the method, continuous machining process is separated into many machining moments. The deformation of work-piece and cutter at every moment is calculated by finite element method. The machined work-piece is gained by Boolean operation between deformed work-piece and cutter. By analyzing data of final work-piece, machining errors are predicted. The method is proved true by experiment.

  11. Tax amnesties, justice perceptions, and filing behavior: a simulation study.

    Science.gov (United States)

    Rechberger, Silvia; Hartner, Martina; Kirchler, Erich; Hämmerle, Franziska

    2010-04-01

    A simulation study demonstrates the influence of perceived justice of a tax amnesty on subsequent tax compliance. In addition, it investigates how the amnesty is perceived to serve the punishment objectives retribution (i.e., giving offenders what they "deserve") and value restoration (i.e., restoring the values violated by tax evasion). Hierarchical regression analysis revealed the expected positive influence of justice on subsequent tax compliance. However, when the influence of punishment objectives was controlled for, the influence of justice disappeared, while retribution and value restoration showed positive effects on post-amnesty tax compliance.

  12. Simulation and simplified design studies of photovoltaic systems

    Energy Technology Data Exchange (ETDEWEB)

    Evans, D.L.; Facinelli, W.A.; Koehler, L.P.

    1980-09-01

    Results of TRNSYS simulations of photovoltaic systems with electrical storage are described. Studies of the sensitivity of system performance, in terms of the fraction of the electrical load supplied by the solar energy system, to variables such as array size, battery size, location, time of year, and load shape are reported. An accurate simplified method for predicting array output of max-power photovoltaic systems is presented. A second simplified method, which estimates the overall performance of max-power systems, is developed. Finally, a preliminary technique for predicting clamped-voltage system performance is discussed.

  13. Hypervelocity Impact on Interfaces: A Molecular-Dynamics Simulations Study

    Science.gov (United States)

    Bachlechner, Martina E.; Owens, Eli T.; Leonard, Robert H.; Cockburn, Bronwyn C.

    2008-03-01

    Silicon/silicon nitride interfaces are found in micro electronics and solar cells. In either application the mechanical integrity of the interface is of great importance. Molecular-dynamics simulations are performed to study the failure of interface materials under the influence of hypervelocity impact. Silicon nitride plates impacting on silicon/silicon nitride interface targets of different thicknesses result in structural phase transformation and delamination at the interface. Detailed analyses of atomic velocities, bond lengths, and bond angles are used to qualitatively examine the respective failure mechanisms.

  14. Detective quantum efficiency (DQE) in PET scanners: A simulation study.

    Science.gov (United States)

    Karpetas, George E; Michail, Christos M; Fountos, George P; Kalyvas, Nektarios I; Valais, Ioannis G; Kandarakis, Ioannis S; Panayiotakis, George S

    2017-07-01

    The aim of the present study is to introduce the detective quantum efficiency (DQE) for the image quality assessment of positron emission tomography (PET) scanners. For this purpose, a thin layer chromatography (TLC) plane source was simulated using a previously validated, scanner and source geometry, Monte Carlo (MC) model. The model was developed with the Geant4 application for tomographic emission (GATE) MC package and reconstructed images obtained with the software for tomographic image reconstruction (STIR), with cluster computing. The GE Discovery ST PET scanner was simulated by using a previously validated code. A plane source consisting of a TLC plate, was simulated by a layer of silica gel on aluminum (Al) foil substrate, immersed in 18F-FDG bath solution (1MBq). Image quality was assessed in terms of the modulation transfer function (MTF) and the normalized noise power spectrum (NNPS) in order to obtain the detective quantum efficiency (DQE). MTF curves were estimated from transverse reconstructed images of the plane source, whereas the NNPS data were estimated from the corresponding coronal images. Images were reconstructed by the maximum likelihood estimation ordered subsets maximum a posteriori one step late (MLE)-OS-MAP-OSL algorithm, by using various subsets 1-21) and iterations 1-20). MTF values were found to increase up to the 12th iteration whereas remain almost constant thereafter. However, the range of the increase in the MTF is limited as the number of subsets increases. The noise levels were found to increase with the corresponding increase of both the number of iterations and subsets. The maximum NNPS value (0.517mm(2)) was observed for the 420 MLEM-equivalent iterations reconstructed image at 0cycles/mm. Finally DQE values were found to increase for spatial frequencies up to 0.038cycles/mm and to decrease thereafter with the corresponding increase in both number of iterations and subsets. The maximum DQE value (0.48 at 0.038cycles/mm) was

  15. Large Scale Simulation Platform for NODES Validation Study

    Energy Technology Data Exchange (ETDEWEB)

    Sotorrio, P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Qin, Y. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Min, L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-04-27

    This report summarizes the Large Scale (LS) simulation platform created for the Eaton NODES project. The simulation environment consists of both wholesale market simulator and distribution simulator and includes the CAISO wholesale market model and a PG&E footprint of 25-75 feeders to validate the scalability under a scenario of 33% RPS in California with additional 17% of DERS coming from distribution and customers. The simulator can generate hourly unit commitment, 5-minute economic dispatch, and 4-second AGC regulation signals. The simulator is also capable of simulating greater than 10k individual controllable devices. Simulated DERs include water heaters, EVs, residential and light commercial HVAC/buildings, and residential-level battery storage. Feeder-level voltage regulators and capacitor banks are also simulated for feeder-level real and reactive power management and Vol/Var control.

  16. Comparative Study of the Effectiveness of Three Learning Environments: Hyper-Realistic Virtual Simulations, Traditional Schematic Simulations and Traditional Laboratory

    Science.gov (United States)

    Martinez, Guadalupe; Naranjo, Francisco L.; Perez, Angel L.; Suero, Maria Isabel; Pardo, Pedro J.

    2011-01-01

    This study compared the educational effects of computer simulations developed in a hyper-realistic virtual environment with the educational effects of either traditional schematic simulations or a traditional optics laboratory. The virtual environment was constructed on the basis of Java applets complemented with a photorealistic visual output.…

  17. Plasma boundaries at Mars: a 3-D simulation study

    Directory of Open Access Journals (Sweden)

    A. Bößwetter

    2004-12-01

    Full Text Available The interaction of the solar wind with the ionosphere of planet Mars is studied using a three-dimensional hybrid model. Mars has only a weak intrinsic magnetic field, and consequently its ionosphere is directly affected by the solar wind. The gyroradii of the solar wind protons are in the range of several hundred kilometers and therefore comparable with the characteristic scales of the interaction region. Different boundaries emerge from the interaction of the solar wind with the continuously produced ionospheric heavy-ion plasma, which could be identified as a bow shock (BS, ion composition boundary (ICB and magnetic pile up boundary (MPB, where the latter both turn out to coincide. The simulation results regarding the shape and position of these boundaries are in good agreement with the measurements made by Phobos-2 and MGS spacecraft. It is shown that the positions of these boundaries depend essentially on the ionospheric production rate, the solar wind ram pressure, and the often unconsidered electron temperature of the ionospheric heavy ion plasma. Other consequences are rays of planetary plasma in the tail and heavy ion plasma clouds, which are stripped off from the dayside ICB region by some instability.

    Key words. Magnetospheric physics (solar wind interactions with unmagnetized bodies – Space plasma physics (discontinuities; numerical simulation studies

  18. Computer simulation study of water using a fluctuating charge model

    Indian Academy of Sciences (India)

    M Krishnan; A Verma; S Balasubramanian

    2001-10-01

    Hydrogen bonding in small water clusters is studied through computer simulation methods using a sophisticated, empirical model of interaction developed by Rick et al (S W Rick, S J Stuart and B J Berne 1994 J. Chem. Phys. 101 6141) and others. The model allows for the charges on the interacting sites to fluctuate as a function of time, depending on their local environment. The charge flow is driven by the difference in the electronegativity of the atoms within the water molecule, thus effectively mimicking the effects of polarization of the charge density. The potential model is thus transferable across all phases of water. Using this model, we have obtained the minimum energy structures of water clusters up to a size of ten. The cluster structures agree well with experimental data. In addition, we are able to distinctly identify the hydrogens that form hydrogen bonds based on their charges alone, a feature that is not possible in simulations using fixed charge models. We have also studied the structure of liquid water at ambient conditions using this fluctuating charge model.

  19. Porous HMX initiation studies -- Sugar as an inert simulant

    Energy Technology Data Exchange (ETDEWEB)

    Sheffield, S.A.; Gustavsen, R.L.; Alcon, R.R.

    1997-11-01

    For several years the authors have been using magnetic particle velocity gauges to study the shock loading of porous HMX (65 and 73% TMD) of different particle sizes to determine their compaction and initiation characteristics. Because it has been difficult to separate the effects of compaction and reaction, an inert simulant was needed with properties similar to HMX. Sugar was selected as the simulant for several reasons: (1) the particle size distribution of C and H granulated sugar is similar to the coarse HMX the authors have been using (120 {micro}m average size), (2) the particle size of C and H confectioners (powdered) sugar is similar to the fine HMX in the studies (10 {micro}m average size), (3) it is an organic material, and (4) sugar was readily available. Because the densities of HMX and sugar are somewhat different, the authors chose to do the experiments on sugar compacts at 65 and 73% TMD. As expected, no reaction was observed in the sugar experiments. Compaction wave profiles were similar to those measured earlier for the HMX, i.e., the compaction waves in the coarse sugar were quite disperse while those in the fine sugar were much sharper. This indicates that the compaction wave profiles are controlled by particle size and not reaction. Also, the coarse sugar gauge signals exhibited a great deal of noise, thought to the be result of fracto-emission.

  20. Scheduling of a computer integrated manufacturing system: A simulation study

    Directory of Open Access Journals (Sweden)

    Nadia Bhuiyan

    2011-12-01

    Full Text Available Purpose: The purpose of this paper is to study the effect of selected scheduling dispatching rules on the performance of an actual CIM system using different performance measures and to compare the results with the literature.Design/methodology/approach: To achieve this objective, a computer simulation model of the existing CIM system is developed to test the performance of different scheduling rules with respect to mean flow time, machine efficiency and total run time as performance measures.Findings: Results suggest that the system performs much better considering the machine efficiency when the initial number of parts released is maximum and the buffer size is minimum. Furthermore, considering the average flow time, the system performs much better when the selected dispatching rule is either Earliest Due Date (EDD or Shortest Process Time (SPT with buffer size of five and the initial number of parts released of eight.Research limitations/implications: In this research, some limitations are: a limited number of factors and levels were considered for the experiment set-up; however the flexibility of the model allows experimenting with additional factors and levels. In the simulation experiments of this research, three scheduling dispatching rules (First In/First Out (FIFO, EDD, SPT were used. In future research, the effect of other dispatching rules on the system performance can be compared. Some assumptions can be relaxed in future work.Practical implications: This research helps to identify the potential effect of a selected number of dispatching rules and two other factors, the number of buffers and initial number of parts released, on the performance of the existing CIM systems with different part types where the machines are the major resource constraints.Originality/value: This research is among the few to study the effect of the dispatching rules on the performance of the CIM systems with use of terminating simulation analysis. This is

  1. Simulation Study Of Early Afterglows Observed With Swift

    Science.gov (United States)

    Nishikawa, Ken-Ichi; Hededal, C.; Hardee, P.; Mizuno, Y.; Fishman, G. J.

    2006-09-01

    A 3-D relativistic particle-in-cell code has been used to simulate the dynamics of forward and reverse shocks with thin and thick shells within the parameter constraints provided by present Swift observations and the present models of GRB emission. Our 3-D RPIC simulations have provided the dynamics of collisionless shocks in electron-ion and electron-positron plasmas with and without initial ambient magnetic fields and revealed the importance of ``jitter radiation'' with prompt and afterglow spectra due to the inhomogeneous magnetic fields generated by the Weibel instability. It is different from synchrotron radiation, which is usually assumed to be the dominant radiation process. We have investigated gamma-ray burst emissions from prompt, early, and late afterglows considering microscopic processes. Based on our previous investigation of the Weibel instability for each stage of evolution of ejecta propagating in the ISM, we have incorporated the plasma conditions (relativistic jets) with the density and composition of the plasmas, the magnetic field strength ($\\sigma$-values (the ratio of the electromagnetic energy flux to the particle energy flux)) and its direction, and the Lorentz factor for the different stages in prompt and afterglows. Systematic simulation studies of the relativistic collisionless shocks, associated particle acceleration, magnetic field generation and self-consistent radiation provide insight into undetermined issues in prompt and afterglows observed by Swift. Self-consistently calculated lightcurves, spectra, spectral evolutions, and polarization as function of viewing angle will be done to light a shed on recent new observations by Swift, in particular, X-ray flares, early steep decay, and shallow decay.

  2. Fast Electron Beam Simulation and Dose Calculation

    CERN Document Server

    Trindade, A; Peralta, L; Lopes, M C; Alves, C; Chaves, A

    2003-01-01

    A flexible multiple source model capable of fast reconstruction of clinical electron beams is presented in this paper. A source model considers multiple virtual sources emulating the effect of accelerator head components. A reference configuration (10 MeV and 10x10 cm2 field size) for a Siemens KD2 linear accelerator was simulated in full detail using GEANT3 Monte Carlo code. Our model allows the reconstruction of other beam energies and field sizes as well as other beam configurations for similar accelerators using only the reference beam data. Electron dose calculations were performed with the reconstructed beams in a water phantom and compared with experimental data. An agreement of 1-2% / 1-2 mm was obtained, equivalent to the accuracy of full Monte Carlo accelerator simulation. The source model reduces accelerator simulation CPU time by a factor of 7500 relative to full Monte Carlo approaches. The developed model was then interfaced with DPM, a fast radiation transport Monte Carlo code for dose calculati...

  3. Studies of climate dynamics with innovative global-model simulations

    Science.gov (United States)

    Shi, Xiaoming

    Climate simulations with different degrees of idealization are essential for the development of our understanding of the climate system. Studies in this dissertation employ carefully designed global-model simulations for the goal of gaining theoretical and conceptual insights into some problems of climate dynamics. Firstly, global warming-induced changes in extreme precipitation are investigated using a global climate model with idealized geography. The precipitation changes over an idealized north-south mid-latitude mountain barrier at the western margin of an otherwise flat continent are studied. The intensity of the 40 most intense events on the western slopes increases by about ~4°C of surface warming. In contrast, the intensity of the top 40 events on the eastern mountain slopes increases at about ~6°C. This higher sensitivity is due to enhanced ascent during the eastern-slope events, which can be explained in terms of linear mountain-wave theory relating to global warming-induced changes in the upper-tropospheric static stability and the tropopause level. Dominated by different dynamical factors, changes in the intensity of extreme precipitation events over plains and oceans might differ from changes over mountains. So the response of extreme precipitation over mountains and flat areas are further compared using larger data sets of simulated extreme events over the two types of surfaces. It is found that the sensitivity of extreme precipitation to increases in global mean surface temperature is 3% per °C lower over mountains than over the oceans or the plains. The difference in sensitivity among these regions is not due to thermodynamic effects, but rather to differences between the gravity-wave dynamics governing vertical velocities over the mountains and the cyclone dynamics governing vertical motions over the oceans and plains. The strengthening of latent heating in the storms over oceans and plains leads to stronger ascent in the warming climate

  4. Using simulation in out-patient queues: a case study.

    Science.gov (United States)

    Huarng, F; Lee, M H

    1996-01-01

    Overwork and overcrowding in some periods was an important issue for the out-patient department of a local hospital in Chia-Yi in Taiwan. The hospital administrators wanted to manage the patient flow effectively. Describes a study which focused on the utilization of doctors and staff in the out-patient department, the time spent in the hospital by an out-patient, and the length of the out-patient queue. Explains how a computer simulation model was developed to study how changes in the appointment system, staffing policies and service units would affect the observed bottleneck. The results show that the waiting time was greatly reduced and the workload of the doctor was also reduced to a reasonable rate in the overwork and overcrowding periods.

  5. Optorsim: A Grid Simulator for Studying Dynamic Data Replication Strategies

    CERN Document Server

    Bell, William H; Millar, A Paul; Capozza, Luigi; Stockinger, Kurt; Zini, Floriano

    2003-01-01

    Computational grids process large, computationally intensive problems on small data sets. In contrast, data grids process large computational problems that in turn require evaluating, mining and producing large amounts of data. Replication, creating geographically disparate identical copies of data, is regarded as one of the major optimization techniques for reducing data access costs. In this paper, several replication algorithms are discussed. These algorithms were studied using the Grid simulator: OptorSim. OptorSim provides a modular framework within which optimization strategies can be studied under different Grid configurations. The goal is to explore the stability and transient behaviour of selected optimization techniques. We detail the design and implementation of OptorSim and analyze various replication algorithms based on different Grid workloads.

  6. Right-Censored Nonparametric Regression: A Comparative Simulation Study

    Directory of Open Access Journals (Sweden)

    Dursun Aydın

    2016-11-01

    Full Text Available This paper introduces the operating of the selection criteria for right-censored nonparametric regression using smoothing spline. In order to transform the response variable into a variable that contains the right-censorship, we used the KaplanMeier weights proposed by [1], and [2]. The major problem in smoothing spline method is to determine a smoothing parameter to obtain nonparametric estimates of the regression function. In this study, the mentioned parameter is chosen based on censored data by means of the criteria such as improved Akaike information criterion (AICc, Bayesian (or Schwarz information criterion (BIC and generalized crossvalidation (GCV. For this purpose, a Monte-Carlo simulation study is carried out to illustrate which selection criterion gives the best estimation for censored data.

  7. Are We Simulating the Status Quo? Ideology and Social Studies Simulations

    Science.gov (United States)

    DeLeon, Abraham P.

    2008-01-01

    Reflective educators try to devise ways to make classroom learning more experiential and engaging for their students. Simulations allow students to experience situations they might face outside of the classroom. Advocates of simulations purport that they are one of the most effective ways of teaching new concepts and ideas because they allow for…

  8. A protocol for conducting rainfall simulation to study soil runoff.

    Science.gov (United States)

    Kibet, Leonard C; Saporito, Louis S; Allen, Arthur L; May, Eric B; Kleinman, Peter J A; Hashem, Fawzy M; Bryant, Ray B

    2014-04-03

    Rainfall is a driving force for the transport of environmental contaminants from agricultural soils to surficial water bodies via surface runoff. The objective of this study was to characterize the effects of antecedent soil moisture content on the fate and transport of surface applied commercial urea, a common form of nitrogen (N) fertilizer, following a rainfall event that occurs within 24 hr after fertilizer application. Although urea is assumed to be readily hydrolyzed to ammonium and therefore not often available for transport, recent studies suggest that urea can be transported from agricultural soils to coastal waters where it is implicated in harmful algal blooms. A rainfall simulator was used to apply a consistent rate of uniform rainfall across packed soil boxes that had been prewetted to different soil moisture contents. By controlling rainfall and soil physical characteristics, the effects of antecedent soil moisture on urea loss were isolated. Wetter soils exhibited shorter time from rainfall initiation to runoff initiation, greater total volume of runoff, higher urea concentrations in runoff, and greater mass loadings of urea in runoff. These results also demonstrate the importance of controlling for antecedent soil moisture content in studies designed to isolate other variables, such as soil physical or chemical characteristics, slope, soil cover, management, or rainfall characteristics. Because rainfall simulators are designed to deliver raindrops of similar size and velocity as natural rainfall, studies conducted under a standardized protocol can yield valuable data that, in turn, can be used to develop models for predicting the fate and transport of pollutants in runoff.

  9. A larval dispersion study using lagrangian simulation of particles

    Directory of Open Access Journals (Sweden)

    Laura Rodríguez Díaz

    2014-06-01

    Full Text Available The continuous displacement of water allows stabilize the temperature and also distributes nutrients and plankton in the ocean and seas permitting the development of organisms and the transfers of larvae from the spawning areas to the habitat where adult fishes can be found. The area of study covers The North Atlantic Ocean so the principal aim of the study is analyze if released particles at the Florida Strait could cross the North Atlantic Ocean and reach the European shelf. To test this, it has simulated Lagrangian trajectories for different numbers of particles or "larvae" with a passive behavior (fixing at a depth of dispersion. It has analyzed the dispersion of those particles by using the data of the components U, V and W from the speed of currents provided by the database SODA which uses an ocean model based on Geophysical Fluid Dynamics Laboratory MOM2 and data profiles from World Ocean Atlas-94 and from Geosat, ERS-1 and TOPEX/Poseidon satellites. Considering the dispersive nature of the ocean, the simulations were performed by releasing many particles (typically of the order of several thousand and it was also necessary to perform an interpolation process in time and space so that the position of the particles could evolve. The simulations have been run with 5,000 particles and it has been considered a biological parameter (planktonic larval duration, PLD that represents the length of larval life. At this study it has been used PLD for a specific starfish larva (Sclerasterias tanneri larvae that can be found at the Gulf of Mexico at different locations. Particles were released in October at the most oceanward location of the Gulf of Mexico close to the Florida Strait where Sclerasterias tanneri larvae can be found. Those particles have been tracked for 660 days (660 days is the PLD of Sclerasterias tanneri larvae recording their position every 15 days. That it has done for a period of more than 100 years (1901-2010. The period (1901

  10. Simulation study of territory size distributions in subterranean termites.

    Science.gov (United States)

    Jeon, Wonju; Lee, Sang-Hee

    2011-06-21

    In this study, on the basis of empirical data, we have simulated the foraging tunnel patterns of two subterranean termites, Coptotermes formosanus Shiraki and Reticulitermes flavipes (Kollar), using a two-dimensional model. We have defined a territory as a convex polygon containing a tunnel pattern and explored the effects of competition among termite territory colonies on the territory size distribution in the steady state that was attained after a sufficient simulation time. In the model, territorial competition was characterized by a blocking probability P(block) that quantitatively describes the ease with which a tunnel stops its advancement when it meets another tunnel; higher P(block) values imply easier termination. In the beginning of the simulation run, N=10, 20,…,100 territory seeds, representing the founding pair, were randomly distributed on a square area. When the territory density was less (N=20), the differences in the territory size distributions for different P(block) values were small because the territories had sufficient space to grow without strong competitions. Further, when the territory density was higher (N>20), the territory sizes increased in accordance with the combinational effect of P(block) and N. In order to understand these effects better, we introduced an interference coefficient γ. We mathematically derived γ as a function of P(block) and N: γ(N,P(block))=a(N)P(block)/(P(block)+b(N)). a(N) and b(N) are functions of N/(N+c) and d/(N+c), respectively, and c and d are constants characterizing territorial competition. The γ function is applicable to characterize the territoriality of various species and increases with both the P(block) values and N; higher γ values imply higher limitations of the network growth. We used the γ function, fitted the simulation results, and determined the c and d values. In addition, we have briefly discussed the predictability of the present model by comparing it with our previous lattice model

  11. Simulation studies of atomic resolution X-ray holography

    Indian Academy of Sciences (India)

    Yogesh Kashyap; P S Sarkar; Amar Sinha; B K Godwal

    2004-02-01

    X-ray holography is a new method of structure determination based on measurement of interference of a known reference wave with an unknown object wave (containing information on atomic sites scattering the reference wave) so that phase information is preserved. Unlike X-ray diffraction, it does not demand for translational periodicity in the material. It is based on the idea similar to that of optical holography and has been tested on crystals, quasicrystals, thin films and doped semiconductors for their structure determination. In order to analyse potentials and limitations of this technique, we have carried out theoretical simulation studies on simple structures. In this paper we describe the basic algorithm of hologram generation and reconstruction of atomic positions from generated data. We illustrate this technique using Fe (bcc) single crystal as sample case to demonstrate its capabilities and limitations. Simulations were carried out on the Cu (fcc) structure and on complex structure such as the Al–Pd–Mn quasicrystal. Technical issues such as low signal to noise ratio, twin image problem etc have been discussed briefly to emphasize the need for high intensity X-ray source such as synchrotron for experiments and proper reconstruction algorithm. Finally the scope and potential of this technique have been discussed.

  12. SIMULATION STUDY AND IMPLEMENTATION ON ROUTING PROTOCOLS IN MANET

    Directory of Open Access Journals (Sweden)

    Anju Yadav

    2012-09-01

    Full Text Available Ad-hoc networks are characterized by a lack of infrastructure, and by a random and quickly changing network topology; thus the need for a robust dynamic routing protocol that can accommodate such an environment. Consequently, many routing algorithms have come in toexistence to satisfy the needs of communications in such networks. This article presents a simulation study and comparison the performance between two categories of routing protocols, table-driven (Proactive and on-demand (Reactive routing protocols, this two categories were illustrated by using two different examples ofrouting protocols, first example is DSDV (Destination Sequenced Distance-Vector from the Proactive family and the second example isAODV (Ad Hoc On-Demand Distance Vector and DSR (Dynamic Source Routing Protocol from the Reactive family. Both protocols weresimulated by using NS-2 (network simulator-2 package. Both routing protocols were compared in terms of average throughput (packets delivery ratio while varying data rate, TCP types ,maximumpackets in queue and number of packet drop while varying data rate by using the Trace file. For the same queue length DSDV performsbetter than AODV. AODV is preferred due to its more efficient use of bandwidth.

  13. Composite pulses for RF phase encoded MRI: A simulation study.

    Science.gov (United States)

    Salajeghe, Somaie; Babyn, Paul; Sarty, Gordon E

    2017-02-01

    In B1 encoded MRI, a realistic non-linear phase RF encoding coil will generate an inhomogeneous B1 field that leads to spatially dependent flip angles. The non-linearity of the B1 phase gradient can be compensated for in the reconstruction, but B1 inhomogeneity remains a problem. The effect of B1 inhomogeneity on tip angles for conventional, B0 encoded MRI, may be minimized using composite pulses. The objective of this study was to explore the feasibility of using composite pulses with non-linear RF phase encoding coils and to identify the most appropriate composite pulse scheme. RF encoded signals were simulated via the Bloch equation for various symmetric, asymmetric and antisymmetric composite pulses. The simulated signals were reconstructed using a constrained least squares method. Root mean square reconstruction errors varied from 6% (for an asymmetric composite pulse) to 9.7% (for an antisymmetric composite pulse). An asymmetric composite pulse scheme created images with fewer artifacts than other composite pulse schemes in inhomogeneous B0 and B1 fields making it the best choice for decreasing the effects of spatially varying flip angles. This is contrary to the conclusion that antisymmetric composite pulses are the best ones to use for spin echo sequences in conventional, B0 encoded, MRI. Crown Copyright © 2016. Published by Elsevier Inc. All rights reserved.

  14. Autoinhibitory mechanisms of ERG studied by molecular dynamics simulations

    Science.gov (United States)

    Lu, Yan; Salsbury, Freddie R.

    2015-01-01

    ERG, an ETS-family transcription factor, acts as a regulator of differentiation of early hematopoietic cells. It contains an autoinhibitory domain, which negatively regulates DNA-binding. The mechanism of autoinhibitory is still illusive. To understand the mechanism, we study the dynamical properties of ERG protein by molecular dynamics simulations. These simulations suggest that DNA binding autoinhibition associates with the internal dynamics of ERG. Specifically, we find that (1), The N-C terminal correlation in the inhibited ERG is larger than that in uninhibited ERG that contributes to the autoinhibition of DNA-binding. (2), DNA-binding changes the property of the N-C terminal correlation from being anti-correlated to correlated, that is, changing the relative direction of the correlated motions and (3), For the Ets-domain specifically, the inhibited and uninhibited forms exhibit essentially the same dynamics, but the binding of the DNA decreases the fluctuation of the Ets-domain. We also find from PCA analysis that the three systems, even with quite different dynamics, do have highly similar free energy surfaces, indicating that they share similar conformations.

  15. Simulation study of dielectrophoretic assembly of nanowire between electrode pairs

    Energy Technology Data Exchange (ETDEWEB)

    Tao, Quan, E-mail: taq3@pitt.edu; Lan, Fei; Jiang, Minlin [University of Pittsburgh, The Department of Electrical and Computer Engineering (United States); Wei, Fanan [Chinese Academy of Sciences, State Key Laboratory of Robotics, Shenyang Institute of Automation (China); Li, Guangyong, E-mail: gul6@pitt.edu [University of Pittsburgh, The Department of Electrical and Computer Engineering (United States)

    2015-07-15

    Dielectrophoresis (DEP) of rod-shaped nanostructures is attractive because of its exceptional capability to fabricate nanowire-based electronic devices. This efficient manipulation method, however, has a common side effect of assembling a certain number of nanowires at undesired positions. It is therefore essential to understand the underlying physics of DEP of nanowires in order to better guide the assembly. In this work, we propose theoretical methods to characterize the dielectrophoretic force and torque as well as the hydrodynamic drag force and torque on the nanowire (typical length: 10 μm). The trajectory of the nanowire is then simulated based on rigid body dynamics. The nanowire is predicted to either bridge the electrodes or attach on the surface of one electrode. A neighborhood in which the nanowire is more likely to bridge electrodes is found, which is conducive to successful assembly. The simulation study in this work provides us not only a better understanding of the underlying physics but also practical guidance on nanowire assembly by DEP.

  16. Simulation Studies of Satellite Laser CO2 Mission Concepts

    Science.gov (United States)

    Kawa, Stephan Randy; Mao, J.; Abshire, J. B.; Collatz, G. J.; Sun X.; Weaver, C. J.

    2011-01-01

    Results of mission simulation studies are presented for a laser-based atmospheric CO2 sounder. The simulations are based on real-time carbon cycle process modeling and data analysis. The mission concept corresponds to ASCENDS as recommended by the US National Academy of Sciences Decadal Survey. Compared to passive sensors, active (lidar) sensing of CO2 from space has several potentially significant advantages that hold promise to advance CO2 measurement capability in the next decade. Although the precision and accuracy requirements remain at unprecedented levels of stringency, analysis of possible instrument technology indicates that such sensors are more than feasible. Radiative transfer model calculations, an instrument model with representative errors, and a simple retrieval approach complete the cycle from "nature" run to "pseudodata" CO2. Several mission and instrument configuration options are examined, and the sensitivity to key design variables is shown. Examples are also shown of how the resulting pseudo-measurements might be used to address key carbon cycle science questions.

  17. Simulation studies of nucleation of ferroelectric polarization reversal.

    Energy Technology Data Exchange (ETDEWEB)

    Brennecka, Geoffrey L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Winchester, Benjamin Michael [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-08-01

    Electric field-induced reversal of spontaneous polarization is the defining characteristic of a ferroelectric material, but the process(es) and mechanism(s) associated with the initial nucleation of reverse-polarity domains are poorly understood. This report describes studies carried out using phase field modeling of LiTaO3, a relatively simple prototype ferroelectric material, in order to explore the effects of either mechanical deformation or optically-induced free charges on nucleation and resulting domain configuration during field-induced polarization reversal. Conditions were selected to approximate as closely as feasible those of accompanying experimental work in order to provide not only support for the experimental work but also ensure that additional experimental validation of the simulations could be carried out in the future. Phase field simulations strongly support surface mechanical damage/deformation as effective for dramatically reducing the overall coercive field (Ec) via local field enhancements. Further, optically-nucleated polarization reversal appears to occur via stabilization of latent nuclei via the charge screening effects of free charges.

  18. Impact of coronary tortuosity on coronary pressure: numerical simulation study.

    Directory of Open Access Journals (Sweden)

    Yang Li

    Full Text Available BACKGROUND: Coronary tortuosity (CT is a common coronary angiographic finding. Whether CT leads to an apparent reduction in coronary pressure distal to the tortuous segment of the coronary artery is still unknown. The purpose of this study is to determine the impact of CT on coronary pressure distribution by numerical simulation. METHODS: 21 idealized models were created to investigate the influence of coronary tortuosity angle (CTA and coronary tortuosity number (CTN on coronary pressure distribution. A 2D incompressible Newtonian flow was assumed and the computational simulation was performed using finite volume method. CTA of 30°, 60°, 90°, 120° and CTN of 0, 1, 2, 3, 4, 5 were discussed under both steady and pulsatile conditions, and the changes of outlet pressure and inlet velocity during the cardiac cycle were considered. RESULTS: Coronary pressure distribution was affected both by CTA and CTN. We found that the pressure drop between the start and the end of the CT segment decreased with CTA, and the length of the CT segment also declined with CTA. An increase in CTN resulted in an increase in the pressure drop. CONCLUSIONS: Compared to no-CT, CT can results in more decrease of coronary blood pressure in dependence on the severity of tortuosity and severe CT may cause myocardial ischemia.

  19. Hybrid simulation: an active power filter case study

    Directory of Open Access Journals (Sweden)

    Y. A. Garcés

    2011-10-01

    Full Text Available The hybrid simulation concept consisting of a combination of computer simulation and laboratory tests. This approach is a cost effective alternative to physically testing the whole system and allows better understanding of complex coupled systems.This paper describes implementing an active power filter (APF hybrid prototype where the source system and load are implemented as a real-time simulation and the system of static power converter acting as an active power filter is implemented in physical hardware. It also confirmed the hybrid simulation results by implementing the simulation in MATLAB-Simulink regarding the same system implemented during the active power filter analysis and design stage.

  20. Experimental study of quantum simulation for quantum chemistry with a nuclear magnetic resonance simulator.

    Science.gov (United States)

    Lu, Dawei; Xu, Nanyang; Xu, Boruo; Li, Zhaokai; Chen, Hongwei; Peng, Xinhua; Xu, Ruixue; Du, Jiangfeng

    2012-10-13

    Quantum computers have been proved to be able to mimic quantum systems efficiently in polynomial time. Quantum chemistry problems, such as static molecular energy calculations and dynamical chemical reaction simulations, become very intractable on classical computers with scaling up of the system. Therefore, quantum simulation is a feasible and effective approach to tackle quantum chemistry problems. Proof-of-principle experiments have been implemented on the calculation of the hydrogen molecular energies and one-dimensional chemical isomerization reaction dynamics using nuclear magnetic resonance systems. We conclude that quantum simulation will surpass classical computers for quantum chemistry in the near future.

  1. Fermilab Booster Transition Crossing Simulations and Beam Studies

    Energy Technology Data Exchange (ETDEWEB)

    Bhat, C. M. [Fermilab; Tan, C. Y. [Fermilab

    2016-01-01

    The Fermilab Booster accelerates beam from 400 MeV to 8 GeV at 15 Hz. In the PIP (Proton Improvement Plan) era, it is required that Booster deliver 4.2 x $10^{12}$ protons per pulse to extraction. One of the obstacles for providing quality beam to the users is the longitudinal quadrupole oscillation that the beam suffers from right after transition. Although this oscillation is well taken care of with quadrupole dampers, it is important to understand the source of these oscillations in light of the PIP II requirements that require 6.5 x $10^{12}$ protons per pulse at extraction. This paper explores the results from machine studies, computer simulations and solutions to prevent the quadrupole oscillations after transition.

  2. Bias-Correction in Vector Autoregressive Models: A Simulation Study

    Directory of Open Access Journals (Sweden)

    Tom Engsted

    2014-03-01

    Full Text Available We analyze the properties of various methods for bias-correcting parameter estimates in both stationary and non-stationary vector autoregressive models. First, we show that two analytical bias formulas from the existing literature are in fact identical. Next, based on a detailed simulation study, we show that when the model is stationary this simple bias formula compares very favorably to bootstrap bias-correction, both in terms of bias and mean squared error. In non-stationary models, the analytical bias formula performs noticeably worse than bootstrapping. Both methods yield a notable improvement over ordinary least squares. We pay special attention to the risk of pushing an otherwise stationary model into the non-stationary region of the parameter space when correcting for bias. Finally, we consider a recently proposed reduced-bias weighted least squares estimator, and we find that it compares very favorably in non-stationary models.

  3. Water as a lubricant for graphite: a computer simulation study.

    Science.gov (United States)

    Pertsin, Alexander; Grunze, Michael

    2006-09-21

    The phase state and shear behavior of water confined between parallel graphite sheets are studied using the grand canonical Monte Carlo technique and TIP4P model for water. In describing the water-graphite interaction, two orientation-dependent potentials are tried. Both potentials are fitted to many-body polarizable model predictions for the binding energy and the equilibrium conformation of the water-graphite complex [K. Karapetian and K. D. Jordan in Water in Confining Geometries, edited by V. Buch and J. P. Devlin (Springer, Berlin, 2003), pp. 139-150]. Based on the simulation results, the property of water to serve as a lubricant between the rubbing surfaces of graphitic particles is associated, first, with the capillary condensation of water occurring in graphitic pores of monolayer width and, second, with the fact that the water monolayer compressed between graphite particles retains a liquidlike structure and offers only slight resistance to shear.

  4. Apertureless SNOM study on gold nanoparticles: Experiments and simulations

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Weizhe; Kimel, Alexey; Kirilyuk, Andrei; Rasing, Theo [Institute for Molecules and Materials, Radboud University Nijmegen, Heyendaalseweg 135, 6525 AJ Nijmegen (Netherlands)

    2010-08-15

    Gold nanoparticles (about 10 nm in diameter) are investigated by an apertureless (or scattering-type) scanning near-field optical microscope (aSNOM) at 633 nm and a negative optical amplitude signal contrast is observed. To understand the size effect and the interactions between light, tip, and sample, an analytical solution is obtained by adopting a model considering the tip as a point dipole. This model successfully shows the contrast reversal measured in experiments. Some important aspects, however, are neglected by the quasistatic dipole model. Thus, three-dimensional (3D) numerical calculations by a finite integration technique are applied to study the interactions between tip apex, gold nanoparticle, and the substrate surface. The simulated near-field and far-field results help us not only to understand the experimentally acquired aSNOM images but also to investigate the complicated tip-particle-surface interactions. (Abstract Copyright [2010], Wiley Periodicals, Inc.)

  5. Monte Carlo simulations and benchmark studies at CERN's accelerator chain

    CERN Document Server

    AUTHOR|(CDS)2083190; Brugger, Markus

    2016-01-01

    Mixed particle and energy radiation fields present at the Large Hadron Collider (LHC) and its accelerator chain are responsible for failures on electronic devices located in the vicinity of the accelerator beam lines. These radiation effects on electronics and, more generally, the overall radiation damage issues have a direct impact on component and system lifetimes, as well as on maintenance requirements and radiation exposure to personnel who have to intervene and fix existing faults. The radiation environments and respective radiation damage issues along the CERN’s accelerator chain were studied in the framework of the CERN Radiation to Electronics (R2E) project and are hereby presented. The important interplay between Monte Carlo simulations and radiation monitoring is also highlighted.

  6. Simulation studies of polymer electrolytes for battery applications

    Energy Technology Data Exchange (ETDEWEB)

    Halley, J.W.; Nielsen, B.

    1998-07-01

    The authors report modeling studies of polyethylene oxide which are carried out with the goal of elucidating the mechanisms of ion conduction in the temperature range of interest to battery applications. They review the previous work in which the amorphous regions of the polymer between its glass and melting temperatures is modeled by a molecular dynamics algorithm in which the model system is polymerized from a model monomeric liquid. They described new work in which the hydrogen centers are added to the model in order to permit comparison with recent neutron work. They compare the simulations of frequency dependent conductivity with experiment and end with a brief discussion of possibilities for improved conductivity which the current understanding suggests.

  7. Degeneracy and long-range correlation: A simulation study

    Directory of Open Access Journals (Sweden)

    Marmelat Vivien

    2011-12-01

    Full Text Available We present in this paper a simulation study that aimed at evidencing a causal relationship between degeneracy and long-range correlations. Long-range correlations represent a very specific form of fluctuations that have been evidenced in the outcomes time series produced by a number of natural systems. Long-range correlations are supposed to sign the complexity, adaptability and flexibility of the system. Degeneracy is defined as the ability of elements that are structurally different to perform the same function, and is presented as a key feature for explaining the robustness of complex systems. We propose a model able to generate long-range correlated series, and including a parameter that account for degeneracy. Results show that a decrease in degeneracy tends to reduce the strength of long-range correlation in the series produced by the model.

  8. First studies of T-station alignment with simulated data

    CERN Document Server

    Nicolas, L; Hicheur, A; Hulsbergen, W; Needham, M; Raven, G

    2008-01-01

    The alignment of the tracking stations using tracks fitted using standard LHCb track fit is studied. The procedure is presented together with two examples using simulated data. The first scenario presents the alignment of the IT and OT layers using beam-gas events at 450~GeV with no magnetic field. The second scenario is the alignment of the OT layers and IT boxes, layers and ladders with magnet-on data using minimum bias events at nominal energy. The results are validated by refitting J/$\\psi$ tracks using the misaligned geometry compared to the re-aligned case as well as the default. It is shown that after alignment the J $\\psi$ mass resolution is degraded by at most 3~\\%.

  9. A Simulation Study of Hall Effect on Double Tearing Modes

    Institute of Scientific and Technical Information of China (English)

    ZHANG Chenglong; MA Zhiwei; DONG Jiaqi

    2008-01-01

    A Hall magnetohydrodynamics (MHD) simulation is carried out to study the dy-namic process of double tearing mode. The results indicated that the growth rates in the earlier nonlinear and transition phases agree with the previous results. With further development of reconnection, the current sheet thickness is much smaller than the ion inertia length, which leads to a strong influence of the Hall effects. As a result, the reconnection in the late nonlinear phase exhibits an explosive nature with a time scale nearly independent of resistivity. A localized and severely intensified current density is observed and the maximum kinetic energy is over one order of magnitude higher in Hall MHD than that in resistive MHD.

  10. Fermilab Booster Transition Crossing Simulations and Beam Studies

    Energy Technology Data Exchange (ETDEWEB)

    Bhat, C. M. [Fermilab; Tan, C. Y. [Fermilab

    2016-01-01

    The Fermilab Booster accelerates beam from 400 MeV to 8 GeV at 15 Hz. In the PIP (Proton Improvement Plan) era, it is required that Booster deliver 4.2 x $10^{12}$ protons per pulse to extraction. One of the obstacles for providing quality beam to the users is the longitudinal quadrupole oscillation that the beam suffers from right after transition. Although this oscillation is well taken care of with quadrupole dampers, it is important to understand the source of these oscillations in light of the PIP II requirements that require 6.5 x $10^{12}$ protons per pulse at extraction. This paper explores the results from machine studies, computer simulations and solutions to prevent the quadrupole oscillations after transition.

  11. A GEANT4 simulation study of BESⅢ endcap TOF upgrade

    Institute of Scientific and Technical Information of China (English)

    ZHANG Hui; SHAO Ming; LI Cheng; CHEN Hong-Fang; HENG Yue-Kun; SUN Yong-Jie; TANG Ze-Bo

    2013-01-01

    A GEANT4-based Monte-Carlo (MC) model is developed to study the performance of endcap timeof-flight (ETOF) at BESⅢ.It's found that the multiple scattering effects,mainly from the materials at the MDC endcap,can cause multi-hit on the ETOF's readout cell and significantly influence the timing property of ETOF.A multi-gap resistive plate chamber (MRPC) with a smaller readout cell structure is more suitable for the ETOF detector due to significantly reduced multi-hit rate (per channel),from 71.5% for currently-used scintillator-based ETOF to 21.8% or 16.7% for MRPC-based ETOF,depending on the readout pad size used.The timing performance of an MRPC ETOF is also improved.These simulation results suggest and guide an ETOF upgrade effort at BESⅢ.

  12. LCIO - A persistency framework for linear collider simulation studies

    Energy Technology Data Exchange (ETDEWEB)

    Graf, Norman

    2003-06-17

    Almost all groups involved in linear collider detector studies have their own simulation software framework. Using a common persistency scheme would allow to easily share results and compare reconstruction algorithms. We present such a persistency framework, called LCIO (Linear Collider I/O). The framework has to fulfill the requirements of the different groups today and be flexible enough to be adapted to future needs. To that end we define an ''abstract object persistency layer'' that will be used by the applications. A first implementation, based on a sequential file format (SIO) is completely separated from the interface, thus allowing support to additional formats if necessary. The interface is defined with the AID (Abstract Interface Definition) tool from freehep.org that allows creation of Java and C++ code synchronously. In order to make use of legacy software a Fortran interface is also provided. We present the design and implementation of LCIO.

  13. Atomic dynamics of alumina melt: A molecular dynamics simulation study

    Directory of Open Access Journals (Sweden)

    S.Jahn

    2008-03-01

    Full Text Available The atomic dynamics of Al2O3 melt are studied by molecular dynamics simulation. The particle interactions are described by an advanced ionic interaction model that includes polarization effects and ionic shape deformations. The model has been shown to reproduce accurately the static structure factors S(Q from neutron and x-ray diffraction and the dynamic structure factor S(Q,ω from inelastic x-ray scattering. Analysis of the partial dynamic structure factors shows inelastic features in the spectra up to momentum transfers, Q, close to the principal peaks of partial static structure factors. The broadening of the Brillouin line widths is discussed in terms of a frequency dependent viscosity η(ω.

  14. Theory, modelling and simulation in origins of life studies.

    Science.gov (United States)

    Coveney, Peter V; Swadling, Jacob B; Wattis, Jonathan A D; Greenwell, H Christopher

    2012-08-21

    Origins of life studies represent an exciting and highly multidisciplinary research field. In this review we focus on the contributions made by theory, modelling and simulation to addressing fundamental issues in the domain and the advances these approaches have helped to make in the field. Theoretical approaches will continue to make a major impact at the "systems chemistry" level based on the analysis of the remarkable properties of nonlinear catalytic chemical reaction networks, which arise due to the auto-catalytic and cross-catalytic nature of so many of the putative processes associated with self-replication and self-reproduction. In this way, we describe inter alia nonlinear kinetic models of RNA replication within a primordial Darwinian soup, the origins of homochirality and homochiral polymerization. We then discuss state-of-the-art computationally-based molecular modelling techniques that are currently being deployed to investigate various scenarios relevant to the origins of life.

  15. Simulation study of PET detector limitations using continuous crystals

    Science.gov (United States)

    Cabello, Jorge; Etxebeste, Ane; Llosá, Gabriela; Ziegler, Sibylle I.

    2015-05-01

    Continuous crystals can potentially obtain better intrinsic detector spatial resolution compared to pixelated crystals, additionally providing depth of interaction (DoI) information from the light distribution. To achieve high performance sophisticated interaction position estimation algorithms are required. There are a number of algorithms in the literature applied to different crystal dimensions and different photodetectors. However, the different crystal properties and photodetector array geometries have an impact on the algorithm performance. In this work we analysed, through Monte Carlo simulations, different combinations of realistic crystals and photodetector parameters to better understand their influence on the interaction position estimation accuracy, with special emphasis on the DoI. We used an interaction position estimation based on an analytical model for the present work. Different photodetector granulation schemes were investigated. The impact of the number of crystal faces readout by photodetectors was studied by simulating scenarios with one and two photodetectors. In addition, crystals with different levels of reflection and aspect ratios (AR) were analysed. Results showed that the impact of photodetector granularity is mainly shown near the edges and specially in the corners of the crystal. The resulting intrinsic spatial resolution near the centre with a 12 × 12 × 10 mm3 LYSO crystal was 0.7-0.9 mm, while the average spatial resolution calculated on the entire crystal was 0.77 ± 0.18 mm for all the simulated geometries with one and two photodetectors. Having front and back photodetectors reduced the DoI bias (Euclidean distance between estimated DoI and real DoI) and improved the transversal resolution near the corners. In scenarios with one photodetector, small AR resulted in DoI inaccuracies for absorbed events at the entrance of the crystal. These inaccuracies were slightly reduced either by increasing the AR or reducing the amount of

  16. Study and Simulation of Traffic Behavior in Cellular Network

    Science.gov (United States)

    Madhup, D. K.; Shrestha, C. L.; Sharma, R. K.

    2007-07-01

    Cellular radio systems accommodate a large number of users with a limited radio spectrum. The concept of trunking allows a large number of users to share the relatively small number of channels in a cell by providing access to each user, on demand, from a pool of available channels. Traffic engineering deals with provisioning of communication circuits in a given area for a number of subscribers with a required grade of service. Traffic in any cell depends upon the number of users, the average request rate and average call duration. Certain number of channels is required for the required GOS. To design an optimum capacity cellular system, traffic behavior on that system is important. The number of channel required can be estimated by using Erlang formula and Erlang table. Erlang table is not always useful to calculate the probability of blocking in various complex scenarios such as channel borrowing strategies. When the total number of channel available in a given cell are divided to serve partly for newly generated calls and partly for handover calls, and if they use dynamic channel assignment strategies like channel borrowing, then the probability of blocking can't be calculated from Erlang table. Simulation model of the behavior help us to determine the blocking and the channel utilization while using various channel assignment strategies. The title "Study and Simulation of Traffic Behavior in Cellular Network" entail the study of the blocking probability of traffic in cellular network for static channel assignment strategies and dynamic channel borrowing strategies through MATLAB programming language and graphic user interface (GUI). The result shows that the dynamic scheme can perform better than static maximizing the overall utilization of the circuits and minimizing the overall blocking.

  17. Numerical Simulation Study of the Sanchiao Fault Earthquake Scenarios

    Science.gov (United States)

    Wang, Yi-Min; Lee, Shiann-Jong

    2015-04-01

    Sanchiao fault is a western boundary fault of the Taipei basin located in northern Taiwan, close to the densely populated Taipei metropolitan area. Recent study indicated that there is about 40 km of the fault trace extended to the marine area offshore northern Taiwan. Combining the marine and terrestrial parts, the total fault length of Sanchiao fault could be nearly 70 kilometers which implies that this fault has potential to produce a big earthquake. In this study, we analyze several Sanchiao fault earthquake scenarios based on the recipe for predicting strong ground motion. The characterized source parameters include fault length, rupture area, seismic moment, asperity, and slip pattern on the fault plane. According to the assumption of the characterized source model, Sanchiao fault has been inferred to have the potential to produce an earthquake with moment magnitude (Mw) larger than 7.0. Three-dimensional seismic simulation results based upon spectral-element method (SEM) indicate that peak ground acceleration (PGA) is significantly stronger along the fault trace. The basin effect also plays an important role when wave propagates in the Taipei basin which cause seismic wave amplified and prolong the shaking for a very long time. Among all rupture scenarios, the rupture propagated from north to south is the most serious one. Owing to the rupture directivity as well as the basin effects, large PGA (>1g) was observed in the Taipei basin, especially in the northwest side. The results of these scenario earthquake simulations will provide important physically-based numerical data for earthquake mitigation and seismic hazard assessment.

  18. White book Escrime. Climatic simulation studies; Livre blanc Escrime. Etude des simulations climatiques

    Energy Technology Data Exchange (ETDEWEB)

    Terray, L. [CERFACS, 31 - Toulouse (France); Braconnot, P. [Institut Pierre-Simon Laplace IPSL/LSCE, CEA-Orme des Merisiers, 91 - Gif-sur-Yvette (France)

    2007-01-15

    The ESCRIME project aims to manage the analysis realized on the climatic simulations on the framework of the fourth report of the GIEC (group of intergovernmental experts on the climate evolution), in particularly the simulations based on french models. This white book is constituted by 8 chapters: the global scenario, the climatic sensibility, the variation modes, the regionalization and the extremes, the hydrological cycle, the polar regions and the cryo-sphere, the carbon cycle, detection and attributions. (A.L.B.)

  19. Detection efficiency calculation for photons, electrons and positrons in a well detector. Part II: Analytical model versus simulations

    Energy Technology Data Exchange (ETDEWEB)

    Pomme, S. [European Commission, Joint Research Centre, Institute for Reference Materials and Measurements, Retieseweg 111, B-2440 Geel (Belgium)], E-mail: stefaan.pomme@ec.europa.eu; Sibbens, G.; Vidmar, T. [European Commission, Joint Research Centre, Institute for Reference Materials and Measurements, Retieseweg 111, B-2440 Geel (Belgium); Camps, J. [European Commission, Joint Research Centre, Institute for Reference Materials and Measurements, Retieseweg 111, B-2440 Geel (Belgium); SCK.CEN, Belgian Nuclear Research Centre, Boeretang 200, B-2400 Mol (Belgium); Peyres, V. [Laboratorio de Metrologia de Radiaciones Ionizantes, Ed. 12, CIEMAT, Avda. Complutense 22, 28040 Madrid (Spain)

    2009-07-21

    A comparison is made between the results of Monte Carlo simulations and a new analytical model (cf. Part I) for the detection efficiency of a well-type NaI detector for photons, electrons and positrons in the energy range of 0.01 MeV-10 MeV. Using MCNP 5.1.40, GEANT3 and PENELOPE simulation results as benchmark, it was found that the analytical model was quite successful at reproducing the total detection efficiency for photons and positrons, and at giving rough indications on the photon peak-to-total ratio and the electron detection efficiency. It was also able to deal with cylindrical volume sources and vials, eccentric positioning of the source inside the detector well and the possible contribution of scattering or pair production in the surrounding lead shield.

  20. Does interprofessional simulation increase self-efficacy: a comparative study

    OpenAIRE

    Watters, Colm; Reedy, Gabriel; Ross, Alastair; Morgan, Nicola J; Handslip, Rhodri; Jaye, Peter

    2015-01-01

    Objectives In this work, we have compared uniprofessional and interprofessional versions of a simulation education intervention, in an attempt to understand more about whether it improves trainees’ self-efficacy. \\ud \\ud \\ud Background Interprofessionalism has been climbing the healthcare agenda for over 50 years. Simulation education attempts to create an environment for healthcare professionals to learn, without potential safety risks for patients. Integrating simulation and interprofession...

  1. Study on Visualization Simulation of Soybean Leaf Based on IFS

    Institute of Scientific and Technical Information of China (English)

    XING Lichao; SU Zhongbin; ZHENG Pin; JING Liqun

    2008-01-01

    This article applied the self-similarity of fractal theory to the soybean leaf with the aid of powerful iterative computation ability of computer, analyzed the generation principle of IFS code in the iterated function system, calculated the IFS code of the simulation soybean leaf. It basically realized the visualization simulation of soybean leaf and laid a foundation for the visualization simulation of the whole soybean plant.

  2. Dual Energy Method for Breast Imaging: A Simulation Study

    Directory of Open Access Journals (Sweden)

    V. Koukou

    2015-01-01

    Full Text Available Dual energy methods can suppress the contrast between adipose and glandular tissues in the breast and therefore enhance the visibility of calcifications. In this study, a dual energy method based on analytical modeling was developed for the detection of minimum microcalcification thickness. To this aim, a modified radiographic X-ray unit was considered, in order to overcome the limited kVp range of mammographic units used in previous DE studies, combined with a high resolution CMOS sensor (pixel size of 22.5 μm for improved resolution. Various filter materials were examined based on their K-absorption edge. Hydroxyapatite (HAp was used to simulate microcalcifications. The contrast to noise ratio (CNRtc of the subtracted images was calculated for both monoenergetic and polyenergetic X-ray beams. The optimum monoenergetic pair was 23/58 keV for the low and high energy, respectively, resulting in a minimum detectable microcalcification thickness of 100 μm. In the polyenergetic X-ray study, the optimal spectral combination was 40/70 kVp filtered with 100 μm cadmium and 1000 μm copper, respectively. In this case, the minimum detectable microcalcification thickness was 150 μm. The proposed dual energy method provides improved microcalcification detectability in breast imaging with mean glandular dose values within acceptable levels.

  3. Physics validation studies for muon collider detector background simulations

    Energy Technology Data Exchange (ETDEWEB)

    Morris, Aaron Owen; /Northern Illinois U.

    2011-07-01

    Within the broad discipline of physics, the study of the fundamental forces of nature and the most basic constituents of the universe belongs to the field of particle physics. While frequently referred to as 'high-energy physics,' or by the acronym 'HEP,' particle physics is not driven just by the quest for ever-greater energies in particle accelerators. Rather, particle physics is seen as having three distinct areas of focus: the cosmic, intensity, and energy frontiers. These three frontiers all provide different, but complementary, views of the basic building blocks of the universe. Currently, the energy frontier is the realm of hadron colliders like the Tevatron at Fermi National Accelerator Laboratory (Fermilab) or the Large Hadron Collider (LHC) at CERN. While the LHC is expected to be adequate for explorations up to 14 TeV for the next decade, the long development lead time for modern colliders necessitates research and development efforts in the present for the next generation of colliders. This paper focuses on one such next-generation machine: a muon collider. Specifically, this paper focuses on Monte Carlo simulations of beam-induced backgrounds vis-a-vis detector region contamination. Initial validation studies of a few muon collider physics background processes using G4beamline have been undertaken and results presented. While these investigations have revealed a number of hurdles to getting G4beamline up to the level of more established simulation suites, such as MARS, the close communication between us, as users, and the G4beamline developer, Tom Roberts, has allowed for rapid implementation of user-desired features. The main example of user-desired feature implementation, as it applies to this project, is Bethe-Heitler muon production. Regarding the neutron interaction issues, we continue to study the specifics of how GEANT4 implements nuclear interactions. The GEANT4 collaboration has been contacted regarding the minor

  4. Large Eddy Simulation Study for Fluid Disintegration and Mixing

    Science.gov (United States)

    Bellan, Josette; Taskinoglu, Ezgi

    2011-01-01

    A new modeling approach is based on the concept of large eddy simulation (LES) within which the large scales are computed and the small scales are modeled. The new approach is expected to retain the fidelity of the physics while also being computationally efficient. Typically, only models for the small-scale fluxes of momentum, species, and enthalpy are used to reintroduce in the simulation the physics lost because the computation only resolves the large scales. These models are called subgrid (SGS) models because they operate at a scale smaller than the LES grid. In a previous study of thermodynamically supercritical fluid disintegration and mixing, additional small-scale terms, one in the momentum and one in the energy conservation equations, were identified as requiring modeling. These additional terms were due to the tight coupling between dynamics and real-gas thermodynamics. It was inferred that if these terms would not be modeled, the high density-gradient magnitude regions, experimentally identified as a characteristic feature of these flows, would not be accurately predicted without the additional term in the momentum equation; these high density-gradient magnitude regions were experimentally shown to redistribute turbulence in the flow. And it was also inferred that without the additional term in the energy equation, the heat flux magnitude could not be accurately predicted; the heat flux to the wall of combustion devices is a crucial quantity that determined necessary wall material properties. The present work involves situations where only the term in the momentum equation is important. Without this additional term in the momentum equation, neither the SGS-flux constant-coefficient Smagorinsky model nor the SGS-flux constant-coefficient Gradient model could reproduce in LES the pressure field or the high density-gradient magnitude regions; the SGS-flux constant- coefficient Scale-Similarity model was the most successful in this endeavor although not

  5. A Study of Educational Simulations Part II--Interface Design

    Science.gov (United States)

    Adams, W.; Reid, S.; LeMaster, R.; McKagan, S.; Perkins, K.; Dubson, M.; Wieman, C.

    2008-01-01

    Interactive computer simulations with complex representations and sophisticated graphics are a relatively new addition to the classroom, and research in this area is limited. We have conducted over 200 individual student interviews during which the students described what they were thinking as they interacted with simulations. These interviews…

  6. Flight Simulation for the Study of Skill Transfer.

    Science.gov (United States)

    Lintern, Gavan

    1992-01-01

    Discusses skill transfer as a human performance issue based on experiences with computerized flight simulators. Highlights include the issue of similarity; simulation and the design of training devices; an information theory of transfer; invariants for flight control; and experiments involving the transfer of flight skills. (21 references) (LRW)

  7. A Study on Simulation of Aircraft Maintenance and Support System

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Maintenance and support are basic elements to realize the effectiveness of aircraft. For basic analysis of the characteristics of an aircraft maintenance and support system, a simulation method is presented in this paper, and the structure and realization ofthe simulation system is discussed.

  8. Combining hardware and simulation for datacenter scaling studies

    DEFF Research Database (Denmark)

    Ruepp, Sarah Renée; Pilimon, Artur; Thrane, Jakob

    2017-01-01

    and simulation to illustrate the scalability and performance of datacenter networks. We simulate a Datacenter network and interconnect it with real world traffic generation hardware. Analysis of the introduced packet conversion and virtual queueing delays shows that the conversion efficiency is at the order...... of a few microseconds, but the virtual queuing may have significant implication on the performance analysis results....

  9. Salt Effect on Osmotic Pressure of Polyelectrolyte Solutions: Simulation Study

    Directory of Open Access Journals (Sweden)

    Jan-Michael Y. Carrillo

    2014-07-01

    Full Text Available Abstract: We present results of the hybrid Monte Carlo/molecular dynamics simulations of the osmotic pressure of salt solutions of polyelectrolytes. In our simulations, we used a coarse-grained representation of polyelectrolyte chains, counterions and salt ions. During simulation runs, we alternate Monte Carlo and molecular dynamics simulation steps. Monte Carlo steps were used to perform small ion exchange between simulation box containing salt ions (salt reservoir and simulation box with polyelectrolyte chains, counterions and salt ions (polyelectrolyte solution. This allowed us to model Donnan equilibrium and partitioning of salt and counterions across membrane impermeable to polyelectrolyte chains. Our simulations have shown that the main contribution to the system osmotic pressure is due to salt ions and osmotically active counterions. The fraction of the condensed (osmotically inactive counterions first increases with decreases in the solution ionic strength then it saturates. The reduced value of the system osmotic coefficient is a universal function of the ratio of the concentration of osmotically active counterions and salt concentration in salt reservoir. Simulation results are in a very good agreement with osmotic pressure measurements in sodium polystyrene sulfonate, DNA, polyacrylic acid, sodium polyanetholesulfonic acid, polyvinylbenzoic acid, and polydiallyldimethylammonium chloride solutions.

  10. Upset susceptibility study employing circuit analysis and digital simulation

    Science.gov (United States)

    Carreno, V. A.

    1984-01-01

    This paper describes an approach to predicting the susceptibility of digital systems to signal disturbances. Electrical disturbances on a digital system's input and output lines can be induced by activities and conditions including static electricity, lightning discharge, Electromagnetic Interference (EMI) and Electromagnetic Pulsation (EMP). The electrical signal disturbances employed for the susceptibility study were limited to nondestructive levels, i.e., the system does not sustain partial or total physical damage and reset and/or reload will bring the system to an operational status. The front-end transition from the electrical disturbances to the equivalent digital signals was accomplished by computer-aided circuit analysis. The Super-Sceptre (system for circuit evaluation of transient radiation effects) Program was used. Gate models were developed according to manufacturers' performance specifications and parameters resulting from construction processes characteristic of the technology. Digital simulation at the gate and functional level was employed to determine the impact of the abnormal signals on system performance and to study the propagation characteristics of these signals through the system architecture. Example results are included for an Intel 8080 processor configuration.

  11. The cerebellum in action: a simulation and robotics study.

    Science.gov (United States)

    Hofstötter, Constanze; Mintz, Matti; Verschure, Paul F M J

    2002-10-01

    The control or prediction of the precise timing of events are central aspects of the many tasks assigned to the cerebellum. Despite much detailed knowledge of its physiology and anatomy, it remains unclear how the cerebellar circuitry can achieve such an adaptive timing function. We present a computational model pursuing this question for one extensively studied type of cerebellar-mediated learning: the classical conditioning of discrete motor responses. This model combines multiple current assumptions on the function of the cerebellar circuitry and was used to investigate whether plasticity in the cerebellar cortex alone can mediate adaptive conditioned response timing. In particular, we studied the effect of changes in the strength of the synapses formed between parallel fibres and Purkinje cells under the control of a negative feedback loop formed between inferior olive, cerebellar cortex and cerebellar deep nuclei. The learning performance of the model was evaluated at the circuit level in simulated conditioning experiments as well as at the behavioural level using a mobile robot. We demonstrate that the model supports adaptively timed responses under real-world conditions. Thus, in contrast to many other models that have focused on cerebellar-mediated conditioning, we investigated whether and how the suggested underlying mechanisms could give rise to behavioural phenomena.

  12. Numerical simulation study on air quality in aircraft cabins.

    Science.gov (United States)

    Zhao, Yingjie; Dai, Bingrong; Yu, Qi; Si, Haiqing; Yu, Gang

    2017-06-01

    Air pollution is one of the main factors that affect the air quality in aircraft cabins, and the use of different air supply modes could influence the distribution of air pollutants in cabins. Based on the traditional ceiling air supply mode used on the B737NG, this study investigated another 3 different kinds of air supply modes for comparison: luggage rack air supply mode, joint mode combining ceiling and luggage rack air supply, and joint mode combining ceiling and individual air supply. Under the above 4 air supply modes, the air velocity, temperature and distribution of air pollutants in a cabin full of passengers were studied using computational fluid dynamics (CFD), and carbon dioxide (CO2) and formaldehyde were selected as 2 kinds of representative air pollutants. The simulation results show that the joint mode combining ceiling and individual air supply can create a more uniform distribution of air velocity and temperature, has a better effect on the removal of CO2 and formaldehyde, and can provide better air quality in cabins than the other 3 modes. Copyright © 2016. Published by Elsevier B.V.

  13. Hydrotropic Solubilization by Urea Derivatives: A Molecular Dynamics Simulation Study

    Directory of Open Access Journals (Sweden)

    Yong Cui

    2013-01-01

    Full Text Available Hydrotropy is a phenomenon where the presence of a large quantity of one solute enhances the solubility of another solute. The mechanism of this phenomenon remains a topic of debate. This study employed molecular dynamics simulation to investigate the hydrotropic mechanism of a series of urea derivatives, that is, urea (UR, methylurea (MU, ethylurea (EU, and butylurea (BU. A poorly water-soluble compound, nifedipine (NF, was used as the model solute that was solubilized. Structural, dynamic, and energetic changes upon equilibration were analyzed to supply insights to the solubilization mechanism. The study demonstrated that NF and urea derivatives underwent significant nonstoichiometric molecular aggregation in the aqueous solution, a result consistent with the self-aggregation of urea derivatives under the same conditions. The analysis of hydrogen bonding and energy changes revealed that the aggregation was driven by the partial restoration of normal water structure. The energetic data also suggested that the promoted solubilization of NF is favored in the presence of urea derivatives. While the solutes aggregated to a varying degree, the systems were still in single-phase liquid state as attested by their active dynamics.

  14. Simulation studies of a recorder in three dimensions.

    Science.gov (United States)

    Giordano, N

    2014-02-01

    The aeroacoustics of a recorder are explored using a direct numerical simulation based on the Navier-Stokes equations in three dimensions. The qualitative behavior is studied using spatial maps of the air pressure and velocity to give a detailed picture of jet dynamics and vortex shedding near the labium. In certain cases, subtle but perhaps important differences in the motion of the air jet near the edge of the channel as compared to the channel center are observed. These differences may be important when analyzing experimental visualizations of jet motion. The quantitative behavior is studied through analysis of the spectrum of the sound pressure outside the instrument. The effect of chamfers and of changes in the position of the labium relative to the channel on the tonal properties are explored and found to be especially important in the attack portion of the tone. Changes in the spectrum as a result of variations in the blowing speed are also investigated as well as the behavior of the spectrum when the dominant spectral component switches from the fundamental to the second harmonic mode of the resonator tube.

  15. Microstructural and Computer Simulation Studies on Some EFP Materials

    Science.gov (United States)

    Pappu, Sridhar

    1999-06-01

    Explosively Formed Penetrators (EFPs) are self-forming ballistic projectiles deriving their energy from the detonation of a high explosive. As they form in-flight, strains up to 3 are reached at strain rates of about 10^4 per second, resulting in extreme deformation related changes in microstructure. In this study, we report microstructural features of three different EFP materials in an effort to understand the underlying mechanism behind EFP formation. The materials studied are Cu, Fe and Ta and represent different crystal structures and widely differing melting temperatures, properties that seem to play a significant role in microstructural evolution during the EFP formation process. Computer simulations using AUTODYN 2D software program will be carried out and the generated temperature and stress contours will be correlated with the observed microstructural features and measured microhardness data along the EFP half-section. This would help validate the hydrocodes and give useful insight into the unobservable part of the EFP formation process. Such a correlation of experimental and mathematical models would not only help understand the mechanism behind this process but also help design more effective projectiles without carrying out expensive experimental tests.

  16. Simulation and study of stratified flows around finite bodies

    Science.gov (United States)

    Gushchin, V. A.; Matyushin, P. V.

    2016-06-01

    The flows past a sphere and a square cylinder of diameter d moving horizontally at the velocity U in a linearly density-stratified viscous incompressible fluid are studied. The flows are described by the Navier-Stokes equations in the Boussinesq approximation. Variations in the spatial vortex structure of the flows are analyzed in detail in a wide range of dimensionless parameters (such as the Reynolds number Re = Ud/ ν and the internal Froude number Fr = U/( Nd), where ν is the kinematic viscosity and N is the buoyancy frequency) by applying mathematical simulation (on supercomputers of Joint Supercomputer Center of the Russian Academy of Sciences) and three-dimensional flow visualization. At 0.005 < Fr < 100, the classification of flow regimes for the sphere (for 1 < Re < 500) and for the cylinder (for 1 < Re < 200) is improved. At Fr = 0 (i.e., at U = 0), the problem of diffusion-induced flow past a sphere leading to the formation of horizontal density layers near the sphere's upper and lower poles is considered. At Fr = 0.1 and Re = 50, the formation of a steady flow past a square cylinder with wavy hanging density layers in the wake is studied in detail.

  17. Upset susceptibility study employing circuit analysis and digital simulation

    Science.gov (United States)

    Carreno, V. A.

    1984-12-01

    An approach to predict the susceptibility of digital systems to signal disturbances is described. Electrical disturbances on a digital system's input and output lines can be induced by activities and conditions including static electricity, lightning discharge, electromagnetic interference (EMI), and electromagnetic pulsation (EMP). The electrical signal disturbances employed for the susceptibility study were limited to nondestructive levels, i.e., the system does not sustain partial or total physical damage and reset and/or reload brings the system to an operational status. The front-end transition from the electrical disturbances to the equivalent digital signals was accomplished by computer-aided circuit analysis. The super-sceptre (system for circuit evaluation of transient radiation effects) programs was used. Gate models were developed according to manufacturers' performance specifications and parameters resulting from construction processes characteristic of the technology. Digital simulation at the gate and functional level was employed to determine the impact of the abnormal signals on system performance and to study the propagation characteristics of these signals through the system architecture. Example results are included for an Intel 8080 processor configuration.

  18. Study on numerical simulation of nodular graphite iron microstructure formation

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    In this paper, the mathematical and physical model was developed based on thermodynamics and solidification theory before the eutectoid transformation of nodular graphite iron occurred. The Local Element Substitute and Magnification Method was brought forward and 3-dimensional numerical simulation program based on the model and the new assistant algorithm was developed and used to calculate the samples. Results of calculation have good agreement with experimental data. To display the microstructure formation during solidification of nodular graphite iron, a 2-dimensional numerical simulation program combined with the result of the 3-dimensional numerical simulation of experimental samples was compiled.

  19. Simulators as tools to study effects on ecosystems

    Energy Technology Data Exchange (ETDEWEB)

    Hau, B.

    1984-01-01

    Three examples of possible effects on agro-ecosystems are simulated and the advantages of simulation models to investigate the behavior of ecosystems are discussed. The first example is an investigation of the effects of fungicides on epidemics of barley powdery mildew in dependence on different efficacies, and persistences of the chemicals. With the same fungus the effect of environmental pollution by SO/sub 2/ is simulated which reduces the infection efficiency of Erysiphe graminis. In the third case the negative prognosis for late blight of potato is examined under the influence of increased temperature and relative humidity as caused by cooling towers of power stations.

  20. Comparative study of the effectiveness of three learning environments: Hyper-realistic virtual simulations, traditional schematic simulations and traditional laboratory

    Directory of Open Access Journals (Sweden)

    Maria Isabel Suero

    2011-10-01

    Full Text Available This study compared the educational effects of computer simulations developed in a hyper-realistic virtual environment with the educational effects of either traditional schematic simulations or a traditional optics laboratory. The virtual environment was constructed on the basis of Java applets complemented with a photorealistic visual output. This new virtual environment concept, which we call hyper-realistic, transcends basic schematic simulation; it provides the user with a more realistic perception of a physical phenomenon being simulated. We compared the learning achievements of three equivalent, homogeneous groups of undergraduates—an experimental group who used only the hyper-realistic virtual laboratory, a first control group who used a schematic simulation, and a second control group who used the traditional laboratory. The three groups received the same theoretical preparation and carried out equivalent practicals in their respective learning environments. The topic chosen for the experiment was optical aberrations. An analysis of variance applied to the data of the study demonstrated a statistically significant difference (p value <0.05 between the three groups. The learning achievements attained by the group using the hyper-realistic virtual environment were 6.1 percentage points higher than those for the group using the traditional schematic simulations and 9.5 percentage points higher than those for the group using the traditional laboratory.

  1. Simulation of the BGO-OD experiment at ELSA

    Energy Technology Data Exchange (ETDEWEB)

    Johnstone, Russell [University of Bonn, Physikalisches Institut, Bonn (Germany); Collaboration: BGO-OD-Collaboration

    2011-07-01

    The goal of the BGO Open-Dipole (BGO-OD) project is the systematic investigation of the photoproduction of mesons off the nucleon. These processes are related to the structure of both the mesons and the baryons involved in reactions typical of low-energy hadronic physics. In order to fully understand and accurately interpret the results of the BGO-OD experiment it will be necessary to have a full detector and reaction simulation so that effects from detector resolution and acceptance can be accounted for in the final results. The simulation of the BGO-OD will be be undertaken with the Explora Virtual Monte-Carlo (VMC) software framework. This allows for one common user code to be implemented under Geant4, Geant3 and Fluka. The simulation software is also an analysis tool and such flexibility will be key to an efficient final analysis of the data from the BGO-OD experiment. Presented here are current status of the simulation software for the BGO-OD project and the relevant geometry of the BGO-OD, including the central BGO rugby ball detector with the dual-layer Multiwire Proportional Chambers (MWPCs) and the forward spectrometer, consisting of a large dipole magnet, tracking detectors and the Time-of-Flight walls. Simulation of the magnetic field will also be covered.

  2. Simulation study on vertical transport of atrazine in soil column

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    A simulation experiment on vertical transport of herbicide atrazine (2-chloro-4-ethylamino-6-isopropylamino-s-triazine) in soil column was conducted using lysimeter system. The atrazine concentrations in leaching water and soil samples in column at 8 layers with 10 cm thick of each layer were detected by high-performance liquid chromatography. The results show total atrazine amount in leaching water increases nonlinearly with the leaching time and the herbicide application rate, and the atrazine concentrations in column soil decrease with the vertical depth after water leaching. The distribution of atrazine mass in the system after 154 days were that among the applied atrazine, 0.3 % is out through leaching water, 1% is methanol extractable residues in soil, 46 % is methanol nonextractable residues in soil, and 52 % is other loss (including volatilization and degradation). The study indicates movement of atrazine in agriculture soil may not only have relation to the properties of herbicide, but also to the herbicide application history.

  3. Simulation study on vertical transport of atrazine in soil column

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    A simulation experiment on vertical transport of herbicide atrazine (2-chloro-4-ethylamino-6-isopropylamino-s-triazine) in soil column was conducted using lysimeter system. The atrazine concentrations in leaching water and soil samples in column at 8 layers with 10 cm thick of each layer were detected by high-performance liquid chromatography. The results show total atrazine amount in leaching water increases nonlinearly with the leaching time and the herbicide application rate, and the atrazine concentrations in column soil decrease with the vertical depth after water leaching. The distribution of atrazine mass in the system after 154 days were that among the applied atrazine, 0.3 % is out through leaching water, 1% is methanol extractable residues in soil, 46 % is methanol nonextractable residues in soil, and 52 % is other loss (including volatilization and degradation). The study indicates movement of atrazine in agriculture soil may not only have relation to the properties of herbicide, but also to the herbicide application history.

  4. Thermophoresis in liquids: a molecular dynamics simulation study.

    Science.gov (United States)

    Han, Minsub

    2005-04-01

    Thermophoresis in liquids is studied by molecular dynamics simulation (MD). A theory is developed that divides the problem in the way consistent with the characteristic scales. MD is then conducted to obtain the solution of each problem, which is to be all combined for macroscopic predictions. It is shown that when the temperature gradient is applied to the nonconducting liquid bath that contains neutral particles, there occurs a pressure gradient tangential to the particle surface at the particle-liquid interface. This may induce the flow in the interfacial region and eventually the particle to move. This applies to the material system that interacts through van der Waals forces and may be a general source of the thermophoresis phenomenon in liquids. The particle velocity is linearly proportional to the temperature gradient. And, in a large part of the given temperature range, the particle motion is in the direction toward the cold end and decreases with respect to the temperature. It is also shown that the particle velocity decreases or even reverses its sign in the lowest limit of the temperature range or with a particle of relatively weak molecular interactions with the liquid. The characteristics of the phenomenon are analyzed in molecular details.

  5. Wavelet Estimators in Nonparametric Regression: A Comparative Simulation Study

    Directory of Open Access Journals (Sweden)

    Anestis Antoniadis

    2001-06-01

    Full Text Available Wavelet analysis has been found to be a powerful tool for the nonparametric estimation of spatially-variable objects. We discuss in detail wavelet methods in nonparametric regression, where the data are modelled as observations of a signal contaminated with additive Gaussian noise, and provide an extensive review of the vast literature of wavelet shrinkage and wavelet thresholding estimators developed to denoise such data. These estimators arise from a wide range of classical and empirical Bayes methods treating either individual or blocks of wavelet coefficients. We compare various estimators in an extensive simulation study on a variety of sample sizes, test functions, signal-to-noise ratios and wavelet filters. Because there is no single criterion that can adequately summarise the behaviour of an estimator, we use various criteria to measure performance in finite sample situations. Insight into the performance of these estimators is obtained from graphical outputs and numerical tables. In order to provide some hints of how these estimators should be used to analyse real data sets, a detailed practical step-by-step illustration of a wavelet denoising analysis on electrical consumption is provided. Matlab codes are provided so that all figures and tables in this paper can be reproduced.

  6. The neural basis of event simulation: an FMRI study.

    Directory of Open Access Journals (Sweden)

    Yukihito Yomogida

    Full Text Available Event simulation (ES is the situational inference process in which perceived event features such as objects, agents, and actions are associated in the brain to represent the whole situation. ES provides a common basis for various cognitive processes, such as perceptual prediction, situational understanding/prediction, and social cognition (such as mentalizing/trait inference. Here, functional magnetic resonance imaging was used to elucidate the neural substrates underlying important subdivisions within ES. First, the study investigated whether ES depends on different neural substrates when it is conducted explicitly and implicitly. Second, the existence of neural substrates specific to the future-prediction component of ES was assessed. Subjects were shown contextually related object pictures implying a situation and performed several picture-word-matching tasks. By varying task goals, subjects were made to infer the implied situation implicitly/explicitly or predict the future consequence of that situation. The results indicate that, whereas implicit ES activated the lateral prefrontal cortex and medial/lateral parietal cortex, explicit ES activated the medial prefrontal cortex, posterior cingulate cortex, and medial/lateral temporal cortex. Additionally, the left temporoparietal junction plays an important role in the future-prediction component of ES. These findings enrich our understanding of the neural substrates of the implicit/explicit/predictive aspects of ES-related cognitive processes.

  7. Attenuation studies of booster-rocket propellants and their simulants

    Energy Technology Data Exchange (ETDEWEB)

    Weirick, L.J.

    1990-08-01

    A series of impact experiments on a composite propellant, an energetic propellant, and their simulants was recently completed using a light-gas gun. Previous experiments were done to obtain Hugoniot data, to investigate the pressure threshold at which a reaction occurs, and to measure spall damage at various impact velocities. The present studies measured the attenuation of shock waves in these materials, completing the shock characterization needed for material modeling. An initial impulse of 2.0 GPa magnitude and {approximately}0.6 {mu}s duration was imposed upon samples of various thicknesses. VISAR was used to measure the free-surface velocity at the back of the samples; these data were used to generate a curve of shock-wave attenuation versus sample thickness for each material. Results showed that all four materials attenuated the shock wave very similarly. Material thicknesses of 3.0, 7.62, 12.7, and 19.0 mm attenuated the shock wave {approximately}16%, 33%, 50%, and 66% respectively. 14 refs., 12 figs., 4 tabs.

  8. Engine valve and seat insert wear study with a simulator

    Institute of Scientific and Technical Information of China (English)

    Y.S.Wang; S.Narasimhan

    2001-01-01

    The demands on higher performance and the increasing use of alternative fuels chal-lenge engine valves now with greater wear problems than before. A seat wear simulator was builtto evaluate the compatibility and wear of valve and seat insert. The rig test results have been suc-cessfully correlated with engine test results. In this study, intake valves made from Sil 1 materialwere treated with salt bath nitride processes and tested against six different insert materials. Wearresistance of these combinations was ranked and compared to the Sil 1 valve without nitriding.The test results demonstrate that nitriding improved valve seat wear resistance. In the total valveseat recession ranking, the combination of nitrided Sil 1 valve against T 400 insert exhibited theleast total recession among the nineteen combinations of valve and insert tested. The results indi-cate that the valve seat wear mechanisms are a complex combination of adhesion and shearstrain. The nitrides in the compound layer of nitrided valves gave strong atomic bonding, higherhardness, compressive residual stresses, and possible low friction, thus resulted in the superiorwear performance.

  9. Simulation study of radiation damage induced by energetic helium nuclei

    CERN Document Server

    Hoang Dac Luc; Hoang Dac Dat

    2003-01-01

    High energy alpha particles produced by neutron-induced nuclear reactions can damage severely reactor materials. Simulation of this process is described using theoretical calculation and ion irradiation experiments at different displacement doses and Helium doses.

  10. STUDY ON SHIFT SCHEDULE AND SIMULATION OF AUTOMATIC TRANSMISSION

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    From the point of view of saving energy, a new shift schedule and auto-controlling strategy for automatic transmission are proposed. In order to verify this shift schedule,a simulation program using a software package of Matlab/Simulink is developed. The simulation results show the shift schedule is correct. This shift schedule has enriched the theory of vehicle automatic maneuvering and will improve the efficiency of hydrodynanic drive system of the vehicle.

  11. Sludge Batch 2 (Marcobath 3) Flowsheet Studies with Simulants

    Energy Technology Data Exchange (ETDEWEB)

    Koopman, D.C.

    2001-03-02

    Sludge-only process simulations of the Sludge Receipt and Adjustment Tank (SRAT) and the Slurry Mix Evaporator (SME) cycle were conducted for the two most likely scenarios for Sludge Batch 2 (Macrobatch 3). The two scenarios are a roughly 50:50 blend of Tank 8 and Tank 40 washed sludge and Tank 40 washed sludge by itself. The testing used new simulants of Tank 8 and Tank 40 washed sludge prepared at the University of South Carolina. The washing endpoint was about 0.5 moles sodium per liter supernate. This report summarizes both the simulant preparation and process simulation activities. The rheology work requested in the Task Plan will be documented in a separate report. Two scoping SRAT simulations were conducted for Tank 40 sludge. This was followed by a complete SRAT and SME simulation using Sludge Batch 1B acid stoichiometry (137.5 percent). Four scoping SRAT simulations were conducted for the Tank 8/40 blend. Three complete SRAT and SME simulations using blended sludge were then performed. One was at the recommended acid stoichiometry of 125 percent. The second used identical acid stoichiometry with HM levels of noble metals. The final run was at worst case noble metals and assumed complete transfer of the Formic Acid Feed Tank. Testing was completed without any major incidents. Hydrogen flow rates in excess of the design bases (0.65 lbs./hr for the SRAT and 0.23 lbs./hr for the SME) are marked in bold. Full details on the noble metals concentrations can be found in the body of the report.

  12. SIMULATION STUDY OF GENERALIZED PREDICTIVE CONTROL FOR TURBINE POWER

    Institute of Scientific and Technical Information of China (English)

    Shi Xiaoping; Li Dongmei

    2004-01-01

    A GPC (generalized predictive control) law is developed to control the power of a turbine, after transforming the nonlinear mathematical model of the power regulation system into a CARIMA(controlled auto-regressive integrated moving average) form. The effect of the new control law is compared with a traditional PID (proportional, integral and differential) control law by numerical simulation. The simulation results verify the effectiveness, the correctness and the advantage of the new control scheme.

  13. A simulation study of the LHCb RICH performance

    CERN Document Server

    Adinolfi, M; Forty, R W; John, M; Libby, J; Simmons, B; Wilkinson, G

    2001-01-01

    The TDR design of the LHCb RICH system has been modelled in the GEANT based simulation program, SICB, and events subjected to full reconstruction and pattern recognition. Distributions are presented characterising the RICH performance, and the particle identification results are shown in various physics channels of interest. The stability of these results are assessed with respect to changes in some assumptions and components of the simulation. The origin and nature of particles giving rise to the detected Cherenkov rings are investigated.

  14. Advanced simulation study on bunch gap transient effect

    Science.gov (United States)

    Kobayashi, Tetsuya; Akai, Kazunori

    2016-06-01

    Bunch phase shift along the train due to a bunch gap transient is a concern in high-current colliders. In KEKB operation, the measured phase shift along the train agreed well with a simulation and a simple analytical form in most part of the train. However, a rapid phase change was observed at the leading part of the train, which was not predicted by the simulation or by the analytical form. In order to understand the cause of this observation, we have developed an advanced simulation, which treats the transient loading in each of the cavities of the three-cavity system of the accelerator resonantly coupled with energy storage (ARES) instead of the equivalent single cavities used in the previous simulation, operating in the accelerating mode. In this paper, we show that the new simulation reproduces the observation, and clarify that the rapid phase change at the leading part of the train is caused by a transient loading in the three-cavity system of ARES. KEKB is being upgraded to SuperKEKB, which is aiming at 40 times higher luminosity than KEKB. The gap transient in SuperKEKB is investigated using the new simulation, and the result shows that the rapid phase change at the leading part of the train is much larger due to higher beam currents. We will also present measures to mitigate possible luminosity reduction or beam performance deterioration due to the rapid phase change caused by the gap transient.

  15. Networked Control System Simulation Methods:A Comparative Study

    Directory of Open Access Journals (Sweden)

    Naser Pariz

    2008-03-01

    Full Text Available In this paper, we examine several frameworks for NCS simulation: a MATLAB-based package called True Time, the Agent/Plant addition to the ns-2 network simulator, and other MATLAB -based frameworks. We analyze the accuracy, speed, and ease of use of two different methods of simulating system dynamics using the Agent/Plant extension to ns-2. We also introduce a hybrid system model, which we simulate in MATLAB, to verify the simulation of system dynamics in ns-2. We then proceed to use the ns-2 framework and Agent/Plant, using an Euler approximation for the continuous system dynamics, to simulate both the inverted pendulum and pitch control systems on the network topology described in Chapter 2. We examine the performance of these systems as the traffic on the network increases, due to both additional NCSs and non-NCS cross-traffic. We also examine the effects of non-random vs. random sample scheduling, and observe the periodicity of packet loss under both scheduling policies.

  16. The study, design and simulation of a free piston Stirling engine linear alternatorThe study, design and simulation of a free piston Stirling engine linear alternator

    Directory of Open Access Journals (Sweden)

    Teodora Susana Oros

    2014-12-01

    Full Text Available This paper presents a study, design and simulation of a Free Piston Stirling Engine Linear Alternator. There are presented the main steps of the magnetic and electric calculations for a permanent magnet linear alternator of fixed coil and moving magnets type. Finally, a detailed thermal, mechanical and electrical model for a Stirling engine linear alternator have been made in SIMULINK simulation program. The linear alternator simulation model uses a controllable DC voltage which simulates the linear alternator combined with a rectifier, a variable load and a DC-DC converter, which compensates for the variable nature of Stirling engine operation, and ensures a constant voltage output regardless of the load.

  17. Seventeenth Workshop on Computer Simulation Studies in Condensed-Matter Physics

    CERN Document Server

    Landau, David P; Schütler, Heinz-Bernd; Computer Simulation Studies in Condensed-Matter Physics XVI

    2006-01-01

    This status report features the most recent developments in the field, spanning a wide range of topical areas in the computer simulation of condensed matter/materials physics. Both established and new topics are included, ranging from the statistical mechanics of classical magnetic spin models to electronic structure calculations, quantum simulations, and simulations of soft condensed matter. The book presents new physical results as well as novel methods of simulation and data analysis. Highlights of this volume include various aspects of non-equilibrium statistical mechanics, studies of properties of real materials using both classical model simulations and electronic structure calculations, and the use of computer simulations in teaching.

  18. A simulation study of TaMAC protocol using network simulator 2.

    Science.gov (United States)

    Ullah, Sana; Kwak, Kyung Sup

    2012-10-01

    A Wireless Body Area Network (WBAN) is expected to play a significant role in future healthcare system. It interconnects low-cost and intelligent sensor nodes in, on, or around a human body to serve a variety of medical applications. It can be used to diagnose and treat patients with chronic diseases such as hypertensions, diabetes, and cardiovascular diseases. The lightweight sensor nodes integrated in WBAN require low-power operation, which can be achieved using different optimization techniques. We introduce a Traffic-adaptive MAC protocol (TaMAC) for WBAN that supports dual wakeup mechanisms for normal, emergency, and on-demand traffic. In this letter, the TaMAC protocol is simulated using a well-known Network Simulator 2 (NS-2). The problem of multiple emergency nodes is solved using both wakeup radio and CSMA/CA protocol. The power consumption, delay, and throughput performance are closely compared with beacon-enabled IEEE 802.15.4 MAC protocol using extensive simulations.

  19. Three-dimensional facial simulation in bilateral sagittal split osteotomy: a validation study of 100 patients

    NARCIS (Netherlands)

    Liebregts, J.H.; Timmermans, M.; Koning, M.J.J. de; Berge, S.J.; Maal, T.J.J.

    2015-01-01

    PURPOSE: Three-dimensional (3D) virtual planning of orthognathic surgery in combination with 3D soft tissue simulation allows the surgeon and the patient to assess the 3D soft tissue simulation. This study was conducted to validate the predictability of the mass tensor model soft tissue simulation

  20. Three-dimensional facial simulation in bilateral sagittal split osteotomy: a validation study of 100 patients

    NARCIS (Netherlands)

    Liebregts, J.H.; Timmermans, M.; Koning, M.J.J. de; Berge, S.J.; Maal, T.J.J.

    2015-01-01

    PURPOSE: Three-dimensional (3D) virtual planning of orthognathic surgery in combination with 3D soft tissue simulation allows the surgeon and the patient to assess the 3D soft tissue simulation. This study was conducted to validate the predictability of the mass tensor model soft tissue simulation a

  1. A Study of the Simulation Model in WCDMA Systems

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    @@ In this dissertation, we establish an end-to-end simulation model for the performance evaluation of WCDMA/ATM-based third-generation cellular systems where we take into account the quality of services in the integrated voice-data environment. This dissertation aims to provide a framework for performance analysis and evaluation of algorithms in mobile networks. In order to model such a complicated system, three challenges face us: modeling the wireless channel, modeling the traffic sources and modeling the broadband access network. In Chapter 1, the architecture of this system simulation model is concisely described. The author's contribution is to propose an abstract model of the air interface that has the same abstraction level as the broadband access network, which makes the integration of radio links and transport infrastructure feasible. The most important parts of this dissertation are in-depth researches on the three critical problems we mentioned above. Foreach topic, we derive an analytical model and implement it using Block Oriented Network Simulator (BONeS) of Cadence Corporation, USA.In Chapter 2, a digital channel model is established based on the simulation testbed which has developed successfully in the wireless communication laboratory in BUPT. This channel model is a key block in the abstract air-interface simulation module. The author's contributions are:

  2. Pressure swing distillation of azeotropic mixture – A simulation study

    Directory of Open Access Journals (Sweden)

    Asma Iqbal

    2016-09-01

    Full Text Available The aim of this work is to simulate a pressure-swing distillation column for the separation and purification of ethanol from the ethanol–water binary system. The choice for this system is due to the importance of the ethanol–water separation. A steady-state equilibrium-stage model based on normalised MESH equations is used to simulate pressure-swing distillation column applied for the production of ethanol. All the work has been carried out using Aspen Plus simulator, version 13.2. Among the activity coefficient models available, the WILSON-RK model with binary parameters predicted by the Aspen Plus simulator is shown to be the most accurate to correlate the experimental vapor-/liquid equilibrium (VLE data available for the ethanol–water system. The simulation has been satisfactorily carried out for a mixture of 20 mol% ethanol in water at 1 atm pressure and 90 °C with a molar flow rate of 100 kmol/h. The adjusting parameters include D/F ratio and reflux ratio of the two columns to get water purity of 99.5 mol% from the bottom of the Low Pressure Column (LPC and the ethanol purity of 99.7 mol% from the bottom of High Pressure Column (HPC.

  3. A Study on the LEED Energy Simulation Process Using BIM

    Directory of Open Access Journals (Sweden)

    Han-Soo Ryu

    2016-02-01

    Full Text Available In the domestic and international environmentally friendly certification system, energy-related credit occupies a high ratio in the total distribution of certification score Leadership in the Energy and Environmental Design (LEED system is a certification system developed by the US Green Building Council (USGBC in order to assess the environmental friendliness of buildings. The energy-related credit is approximately 30% of the total and also the energy simulation ratio specifically is the highest among the single credits as it is 20%. In this research, the energy simulation process using Building Information Modeling (BIM based on the energy simulation case performed at the A-Tower, LEED certification was proposed. It places an emphasis on the verification process which was short in the previous research. The architectural geometry modeled through the BIM tool is converted to the gbXML, and in this process the geometry is verified through the interference check functions, the gbXML Viewer and the FZKViewer. The energy simulation is performed after the verification procedure. The geometry verification process in the A-Tower project is presented throughout this paper. In conclusion, an improved process is proposed for the productivity and reliability of energy simulation.

  4. Sensitivity study on hydraulic well testing inversion using simulated annealing

    Energy Technology Data Exchange (ETDEWEB)

    Nakao, Shinsuke; Najita, J.; Karasaki, Kenzi

    1997-11-01

    For environmental remediation, management of nuclear waste disposal, or geothermal reservoir engineering, it is very important to evaluate the permeabilities, spacing, and sizes of the subsurface fractures which control ground water flow. Cluster variable aperture (CVA) simulated annealing has been used as an inversion technique to construct fluid flow models of fractured formations based on transient pressure data from hydraulic tests. A two-dimensional fracture network system is represented as a filled regular lattice of fracture elements. The algorithm iteratively changes an aperture of cluster of fracture elements, which are chosen randomly from a list of discrete apertures, to improve the match to observed pressure transients. The size of the clusters is held constant throughout the iterations. Sensitivity studies using simple fracture models with eight wells show that, in general, it is necessary to conduct interference tests using at least three different wells as pumping well in order to reconstruct the fracture network with a transmissivity contrast of one order of magnitude, particularly when the cluster size is not known a priori. Because hydraulic inversion is inherently non-unique, it is important to utilize additional information. The authors investigated the relationship between the scale of heterogeneity and the optimum cluster size (and its shape) to enhance the reliability and convergence of the inversion. It appears that the cluster size corresponding to about 20--40 % of the practical range of the spatial correlation is optimal. Inversion results of the Raymond test site data are also presented and the practical range of spatial correlation is evaluated to be about 5--10 m from the optimal cluster size in the inversion.

  5. Simulation studies of age-specific lifetime major depression prevalence

    Directory of Open Access Journals (Sweden)

    Gordon-Brown Lee

    2010-10-01

    Full Text Available Abstract Background The lifetime prevalence (LTP of Major Depressive Disorder (MDD is the proportion of a population having met criteria for MDD during their life up to the time of assessment. Expectation holds that LTP should increase with age, but this has not usually been observed. Instead, LTP typically increases in the teenage years and twenties, stabilizes in adulthood and then begins to decline in middle age. Proposed explanations for this pattern include: a cohort effect (increasing incidence in more recent birth cohorts, recall failure and/or differential mortality. Declining age-specific incidence may also play a role. Methods We used a simulation model to explore patterns of incidence, recall and mortality in relation to the observed pattern of LTP. Lifetime prevalence estimates from the 2002 Canadian Community Health Survey, Mental Health and Wellbeing (CCHS 1.2 were used for model validation and calibration. Results Incidence rates predicting realistic values for LTP in the 15-24 year age group (where mortality is unlikely to substantially influence prevalence lead to excessive LTP later in life, given reasonable assumptions about mortality and recall failure. This suggests that (in the absence of cohort effects incidence rates decline with age. Differential mortality may make a contribution to the prevalence pattern, but only in older age categories. Cohort effects can explain the observed pattern, but only if recent birth cohorts have a much higher (approximately 10-fold greater risk and if incidence has increased with successive birth cohorts over the past 60-70 years. Conclusions The pattern of lifetime prevalence observed in cross-sectional epidemiologic studies seems most plausibly explained by incidence that declines with age and where some respondents fail to recall past episodes. A cohort effect is not a necessary interpretation of the observed pattern of age-specific lifetime prevalence.

  6. Guidance Provided by Teacher and Simulation for Inquiry-Based Learning: a Case Study

    Science.gov (United States)

    Lehtinen, Antti; Viiri, Jouni

    2017-04-01

    Current research indicates that inquiry-based learning should be guided in order to achieve optimal learning outcomes. The need for guidance is even greater when simulations are used because of their high information content and the difficulty of extracting information from them. Previous research on guidance for learning with simulations has concentrated on guidance provided by the simulation. Little research has been done on the role of the teacher in guiding learners with inquiry-based activities using simulations. This descriptive study focuses on guidance provided during small group investigations; pre-service teachers ( n = 8) guided third and fifth graders using a particular simulation. Data was collected using screen capture videos. The data was analyzed using a combination of theory- and data-driven analysis. Forms of guidance provided by the simulation and by the teachers were divided into the same categories. The distribution of the guidance between the teacher and the simulation was also analyzed. The categories for forms of guidance provided by simulations proved to be applicable to guidance provided by the teachers as well. Teachers offered more various forms of guidance than the simulation. The teachers adapted their guidance and used different patterns to complement the guidance provided by the simulation. The results of the study show that guidance provided by teachers and simulations have different affordances, and both should be present in the classroom for optimal support of learning. This has implications for both teaching with simulations and development of new simulations.

  7. Guidance Provided by Teacher and Simulation for Inquiry-Based Learning: a Case Study

    Science.gov (United States)

    Lehtinen, Antti; Viiri, Jouni

    2016-12-01

    Current research indicates that inquiry-based learning should be guided in order to achieve optimal learning outcomes. The need for guidance is even greater when simulations are used because of their high information content and the difficulty of extracting information from them. Previous research on guidance for learning with simulations has concentrated on guidance provided by the simulation. Little research has been done on the role of the teacher in guiding learners with inquiry-based activities using simulations. This descriptive study focuses on guidance provided during small group investigations; pre-service teachers (n = 8) guided third and fifth graders using a particular simulation. Data was collected using screen capture videos. The data was analyzed using a combination of theory- and data-driven analysis. Forms of guidance provided by the simulation and by the teachers were divided into the same categories. The distribution of the guidance between the teacher and the simulation was also analyzed. The categories for forms of guidance provided by simulations proved to be applicable to guidance provided by the teachers as well. Teachers offered more various forms of guidance than the simulation. The teachers adapted their guidance and used different patterns to complement the guidance provided by the simulation. The results of the study show that guidance provided by teachers and simulations have different affordances, and both should be present in the classroom for optimal support of learning. This has implications for both teaching with simulations and development of new simulations.

  8. Extremophiles Survival to Simulated Space Conditions: An Astrobiology Model Study

    Science.gov (United States)

    Mastascusa, V.; Romano, I.; Di Donato, P.; Poli, A.; Della Corte, V.; Rotundi, A.; Bussoletti, E.; Quarto, M.; Pugliese, M.; Nicolaus, B.

    2014-09-01

    In this work we investigated the ability of four extremophilic bacteria from Archaea and Bacteria domains to resist to space environment by exposing them to extreme conditions of temperature, UV radiation, desiccation coupled to low pressure generated in a Mars' conditions simulator. All the investigated extremophilic strains (namely Sulfolobus solfataricus, Haloterrigena hispanica, Thermotoga neapolitana and Geobacillus thermantarcticus) showed a good resistance to the simulation of the temperature variation in the space; on the other hand irradiation with UV at 254 nm affected only slightly the growth of H. hispanica, G. thermantarcticus and S. solfataricus; finally exposition to Mars simulated condition showed that H. hispanica and G. thermantarcticus were resistant to desiccation and low pressure.

  9. Electromagnetic simulation study of dielectric wall accelerator structures

    Institute of Scientific and Technical Information of China (English)

    ZHAO Quan-Tang; ZHANG Zi-Min; YUAN Ping; CAO Shu-Chun; SHEN Xiao-Kang; JING Yi; LIU Ming; ZHAO Hong-Wei

    2012-01-01

    Two types of dielectric wall accelerator (DWA) structures,a bi-polar Blumlein line and zero integral pulse line (ZIP) structures were investigated.The high gradient insulator simulated by the particle in cell code confirms that it has little influence on the axial electric field.The results of simulations using CST microwave studio indicate how the axial electric field is formed,and the electric field waveforms agree with the theoretical one very well.The influence of layer-to-layer coupling in a ZIP structure is much smaller and the electric field waveform is much better.The axial of the Blumlein structure's electric field has better axial stability.From both of the above,it found that for a shorter pulse width,the axial electric field is much higher and the pulse stability and fidelity are much better.The CST simulation is very helpful for designing DWA structures.

  10. Study on the numerical simulation of batch sieving process

    Institute of Scientific and Technical Information of China (English)

    JIAO Hong-guang; MA Jiao; ZHAO Yue-min; CHEN Lun-jian

    2006-01-01

    Screening was widely used in many sectors of industry. However, it is rather incomplete to the cognition of the sieving process for us due to the daedal separation process involving interactions of thousands of particulates. To address this problem, two dimensional numerical simulation of batch sieving process was performed by adopting advanced discrete element method (DEM), which is one of the highly nonlinear digitized dynamic simulative methods and can be used to reveal the quantitative change from particle dimension level. DEM simulation results show that the jam phenomena of sieve-plate apertures of the "blinding particles" in the screen feed can be demonstrated vividly and results also reveal that the velocity of particle moving on the screen plate will vary along with the screen length. This conclusion will be helpful to the design and operation of screen.

  11. First Principle simulations of electrochemical interfaces - a DFT study

    DEFF Research Database (Denmark)

    Ahmed, Rizwan

    for the whole system to qualify as a proper electrochemical interface. I have also contributed to the model, which accounts for pH in the first principle electrode-electrolyte interface simulations. This is an important step forward, since electrochemical reaction rate and barrier for charge transfer can......In this thesis, I have looked beyond the computational hydrogen electrode (CHE) model, and focused on the first principle simulations which treats the electrode-electrolyte interfaces explicitly. Since obtaining a realistic electrode-electrolyte interface was difficult, I aimed to address various...... challenges regarding first principle electrochemical interface modeling in order to bridge the gap between the model interface used in simulations and real catalyst at operating conditions. Atomic scale insight for the processes and reactions that occur at the electrochemical interface presents a challenge...

  12. Extremophiles survival to simulated space conditions: an astrobiology model study.

    Science.gov (United States)

    Mastascusa, V; Romano, I; Di Donato, P; Poli, A; Della Corte, V; Rotundi, A; Bussoletti, E; Quarto, M; Pugliese, M; Nicolaus, B

    2014-09-01

    In this work we investigated the ability of four extremophilic bacteria from Archaea and Bacteria domains to resist to space environment by exposing them to extreme conditions of temperature, UV radiation, desiccation coupled to low pressure generated in a Mars' conditions simulator. All the investigated extremophilic strains (namely Sulfolobus solfataricus, Haloterrigena hispanica, Thermotoga neapolitana and Geobacillus thermantarcticus) showed a good resistance to the simulation of the temperature variation in the space; on the other hand irradiation with UV at 254 nm affected only slightly the growth of H. hispanica, G. thermantarcticus and S. solfataricus; finally exposition to Mars simulated condition showed that H. hispanica and G. thermantarcticus were resistant to desiccation and low pressure.

  13. Neutron Scattering and Computer Simulation Studies of Ice Dynamics

    Institute of Scientific and Technical Information of China (English)

    DONG Shunle; YU Xinsheng

    2002-01-01

    In this article we describe a range of simulations (lattice dynamics and molecular dynamics) of the inelastic inco-herent neutron scattering spectra of ices (normal ice, ice Ⅱ and ice Ⅷ ). These simulations use a variety of different inter-molecular potentials from simple classic pair-wise (rigid and non-rigid molecule) potentials to sophisticated polarisable poten-tials. It was found that MCY makes stretching and bending interactions too weak while others do them well. We demon-strate that in order to reproduce the measured neutron spectrum, greater anisotropy (or orientational variation) is requiredthan these potentials presently provide.

  14. Study on Simulated Human Load in Unmanned Spaceship

    Institute of Scientific and Technical Information of China (English)

    WANG Lidong; WANG Xianmin; LU Yaofeng; YIN Rui; XIAO Zhijun

    2004-01-01

    This article introduces the methods for testing and verifying the performance of a new type of oxygen supply apparatus as well as the performance of the Environment Control and Life Support System(ECLSS)in the airtight unmanned space capsule,with a simulated human load instead of animals or human in China's Manned Space Program.The simulated human load also supplies a dummy for the spaceship to instal the envirmental testing equipment,to wear spacesuit,and to match the weight in spaceship.

  15. Preliminary Modeling and Simulation Study on Olfactory Cell Sensation

    Science.gov (United States)

    Zhou, Jun; Yang, Wei; Chen, Peihua; Liu, Qingjun; Wang, Ping

    2009-05-01

    This paper introduced olfactory sensory neuron's whole-cell model with a concrete voltage-gated ionic channels and simulation. Though there are many models in olfactory sensory neuron and olfactory bulb, it remains uncertain how they express the logic of olfactory information processing. In this article, the olfactory neural network model is also introduced. This model specifies the connections among neural ensembles of the olfactory system. The simulation results of the neural network model are consistent with the observed olfactory biological characteristics such as 1/f-type power spectrum and oscillations.

  16. Flight simulator for hypersonic vehicle and a study of NASP handling qualities

    Science.gov (United States)

    Ntuen, Celestine A.; Park, Eui H.; Deeb, Joseph M.; Kim, Jung H.

    1992-01-01

    The research goal of the Human-Machine Systems Engineering Group was to study the existing handling quality studies in aircraft with sonic to supersonic speeds and power in order to understand information requirements needed for a hypersonic vehicle flight simulator. This goal falls within the NASA task statements: (1) develop flight simulator for hypersonic vehicle; (2) study NASP handling qualities; and (3) study effects of flexibility on handling qualities and on control system performance. Following the above statement of work, the group has developed three research strategies. These are: (1) to study existing handling quality studies and the associated aircraft and develop flight simulation data characterization; (2) to develop a profile for flight simulation data acquisition based on objective statement no. 1 above; and (3) to develop a simulator and an embedded expert system platform which can be used in handling quality experiments for hypersonic aircraft/flight simulation training.

  17. The simulation study of three typical time frequency analysis methods

    Directory of Open Access Journals (Sweden)

    Li Yifeng

    2017-01-01

    Full Text Available The principals and characteristics of three typical time frequency analysis methods that Short Time Furious transformation, wavelet transformation and Hilbert-Huang transformation are introduced, and the mathematical definition, characteristics and application ranges of these analysis methods and so on are pointed out, then their time-frequency local performance is made analysis and comparison through computer programming and simulation.

  18. Soil Erosion Study through Simulation: An Educational Tool.

    Science.gov (United States)

    Huber, Thomas P.; Falkenmayer, Karen

    1987-01-01

    Discusses the need for education about soil erosion and advocates the use of the Universal Soil Loss Equation (USLE) to show the impacts of human and natural action on the land. Describes the use of a computer simulated version of the USLE in several environmental and farming situations. (TW)

  19. Ship Navigation Simulation Study, Pascagoula Harbor Improvement Project, Pascagoula, Mississippi

    Science.gov (United States)

    1994-08-01

    between the proposed channels hdrian the LASH ship rins (scenmarios 5 and 6) through thdea two channel Prechs Theme results tend to support tie findings...area simulations 76 ChPw 6 FkW Carcmam wn Remom,, ebm ,,, I I I/ Appendix A Pilot Comments and Questionnaires APVPsx A PId Cofmfw nW Oueuaonnas. Al

  20. Measurements and Simulation Studies of Piezoceramics for Acoustic Particle Detection

    CERN Document Server

    Salomon, K; Graf, K; Hoessl, J; Kappes, A; Karg, T; Katz, U; Lahmann, R; Naumann, C

    2005-01-01

    Calibration sources are an indispensable tool for all detectors. In acoustic particle detection the goal of a calibration source is to mimic neutrino signatures as expected from hadronic cascades. A simple and promising method for the emulation of neutrino signals are piezo ceramics. We will present results of measruements and simulations on these piezo ceramics.

  1. Tracking Simulation for Beam Loss Studies with Application to FCC

    CERN Document Server

    Boscolo, M

    2015-01-01

    We present first results on FCC-ee beam losses using a tracking simulation tool originally developed and successfully applied to Flav or Factories designs. After a brief description of the tool, we discuss first results obtained for FCC-ee at top energy, both for the Touschek effect and radiative Bhabha scattering.

  2. Business Profitability: A Simulation Study of Personalities and Organizational Success.

    Science.gov (United States)

    Carsrud, A. L.; And Others

    There is no clearly established link between business success and the personality characteristics of the individual. To investigate the effect of the personalities of potential entrepreneurs/business owners on success, college senior business administration majors (N=152) participted in a business simulation game. Subjects first completed the Work…

  3. A case study on fractal simulation of forest fire spread

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    This paper relates to the semi-empirical model based on fire field energy balance and the physical model based on land temperature,aiming to provide a practical way of describing fire spread.Fire spread is determined by the characteristics of combustible materials and the agency of meteorological factors and terrains.Combustible materials,such as surface area,have no featured scale,yet the process of forest fire spread contains the self-replicating feature,both of which contribute to the self-similarity of fire spread.Consequently,fire behavior can be described by fractal geometry.In this research,we select Wuchagou forest in Da Hinggan Mountains as the experimental site where a forest fire took place three years ago.The forest fire was detected on low-resolution NOAA-AVHRR images,and fire spread was simulated on high-resolution TM images as another attempt to merge information.Based on remote sensing and GIS,we adopted the method of limited spreading lumping (DLA) to describe growing phenomenon to simulate the dynamic process of fire spread and adjusting shape of the result of fire simulation by the scale rule.As a result,the simulated fire and the actual fire manifest the self-similarity in their spreading shapes as well as the quantitative similarity in their areas.

  4. Use of piloted simulation for studies of fighter departure/spin susceptibility

    Science.gov (United States)

    Gilbert, W. P.; Nguyen, L. T.

    1978-01-01

    The NASA-Langley Research Center has incorporated into its stall/spin research program on military airplanes the use of piloted, fixed-base simulation to complement the existing matrix of unique research testing techniques. The piloted simulations of fighter stall/departure flight dynamics are conducted on the Langley Differential Maneuvering Simulator (DMS). The objectives of the simulation research are reviewed. The rationale underlying the simulation methods and procedures used in the evaluation of airplane characteristics is presented. The evaluation steps used to assess fighter stall/departure characteristics are discussed. Simulation results are presented to illustrate the flight dynamics phenomena dealt with. The considerable experience accumulated in the conduct of piloted stall/departure simulation indicates that simulation provides a realistic evaluation of an airplane's maneuverability at high angles of attack and an assessment of the departure and spin susceptibility of the airplane. This realism is obtained by providing the pilot a complete simulation of the airplane and control system which can be flown using a realistic cockpit and visual display in simulations of demanding air combat maneuvering tasks. The use of the piloted simulation methods and procedures described were found very effective in identifying stability and control problem areas and in developing automatic control concepts to alleviate many of these problems. A good level of correlation between simulated flight dynamics and flight test results were obtained over the many fighter configurations studied in the simulator.

  5. Decoding the Dopamine Signal in Macaque Prefrontal Cortex: A Simulation Study Using the Cx3Dp Simulator

    Science.gov (United States)

    Spühler, Isabelle Ayumi; Hauri, Andreas

    2013-01-01

    Dopamine transmission in the prefrontal cortex plays an important role in reward based learning, working memory and attention. Dopamine is thought to be released non-synaptically into the extracellular space and to reach distant receptors through diffusion. This simulation study examines how the dopamine signal might be decoded by the recipient neuron. The simulation was based on parameters from the literature and on our own quantified, structural data from macaque prefrontal area 10. The change in extracellular dopamine concentration was estimated at different distances from release sites and related to the affinity of the dopamine receptors. Due to the sparse and random distribution of release sites, a transient heterogeneous pattern of dopamine concentration emerges. Our simulation predicts, however, that at any point in the simulation volume there is sufficient dopamine to bind and activate high-affinity dopamine receptors. We propose that dopamine is broadcast to its distant receptors and any change from the local baseline concentration might be decoded by a transient change in the binding probability of dopamine receptors. Dopamine could thus provide a graduated ‘teaching’ signal to reinforce concurrently active synapses and cell assemblies. In conditions of highly reduced or highly elevated dopamine levels the simulations predict that relative changes in the dopamine signal can no longer be decoded, which might explain why cognitive deficits are observed in patients with Parkinson’s disease, or induced through drugs blocking dopamine reuptake. PMID:23951205

  6. Study of accuracy of precipitation measurements using simulation method

    Science.gov (United States)

    Nagy, Zoltán; Lajos, Tamás; Morvai, Krisztián

    2013-04-01

    Hungarian Meteorological Service1 Budapest University of Technology and Economics2 Precipitation is one of the the most important meteorological parameters describing the state of the climate and to get correct information from trends, accurate measurements of precipitation is very important. The problem is that the precipitation measurements are affected by systematic errors leading to an underestimation of actual precipitation which errors vary by type of precipitaion and gauge type. It is well known that the wind speed is the most important enviromental factor that contributes to the underestimation of actual precipitation, especially for solid precipitation. To study and correct the errors of precipitation measurements there are two basic possibilities: · Use of results and conclusion of International Precipitation Measurements Intercomparisons; · To build standard reference gauges (DFIR, pit gauge) and make own investigation; In 1999 at the HMS we tried to achieve own investigation and built standard reference gauges But the cost-benefit ratio in case of snow (use of DFIR) was very bad (we had several winters without significant amount of snow, while the state of DFIR was continously falling) Due to the problem mentioned above there was need for new approximation that was the modelling made by Budapest University of Technology and Economics, Department of Fluid Mechanics using the FLUENT 6.2 model. The ANSYS Fluent package is featured fluid dynamics solution for modelling flow and other related physical phenomena. It provides the tools needed to describe atmospheric processes, design and optimize new equipment. The CFD package includes solvers that accurately simulate behaviour of the broad range of flows that from single-phase to multi-phase. The questions we wanted to get answer to are as follows: · How do the different types of gauges deform the airflow around themselves? · Try to give quantitative estimation of wind induced error. · How does the use

  7. Implementing a Simulation Study Using Multiple Software Packages for Structural Equation Modeling

    Directory of Open Access Journals (Sweden)

    Sunbok Lee

    2015-07-01

    Full Text Available A Monte Carlo simulation study is an essential tool for evaluating the behavior of various quantitative methods including structural equation modeling (SEM under various conditions. Typically, a large number of replications are recommended for a Monte Carlo simulation study, and therefore automating a Monte Carlo simulation study is important to get the desired number of replications for a simulation study. This article is intended to provide concrete examples for automating a Monte Carlo simulation study using some standard software packages for SEM: Mplus, LISREL, SAS PROC CALIS, and R package lavaan. Also, the equivalence between the multilevel SEM and hierarchical linear modeling (HLM is discussed, and relevant examples are provided. It is hoped that the codes in this article can provide some building blocks for researchers to write their own code to automate simulation procedures.

  8. Simulation studies of macroparticles falling into the LHC Proton Beam

    CERN Document Server

    Fuster Martinez, N; Zimmermann, F; Baer, T; Giovannozzi, M; Holzer, E B; Nebot Del Busto, E; Nordt, A; Sapinski, M; Yang, Z

    2011-01-01

    We report updated simulations on the interaction of macroparticles falling from the top of the vacuum chamber into the circulating LHC proton beam. The path and charge state of micron size micro-particles are computed together with the resulting beam losses, which — if high enough — can lead to the local quench of superconducting (SC) magnets. The simulated time evolution of the beam loss is compared with observations in order to constrain some macroparticle parameters. We also discuss the possibility of a “multiple crossing” by the same macroparticle, the effect of a strong dipole field, and the dependence of peak loss rate and loss duration on beam current and on beam size.

  9. Design Studies of a Multicusp Ion Source with FEMLAB Simulation

    Science.gov (United States)

    Azadboni, Fatemeh Khodadadi; Sedaghatizade, Mahmood; Sepanloo, Kamran

    2010-02-01

    Femlab simulations have been used to arrive at the first step in the design of an ion source. The goal is to optimize Magnetic multipole plasma confinement geometries, the increased area of constant magnetic field in the central region of the plasma volume and the increase in number of electrons which have stationary orbits within this region of the field. The confinement of electrons is essential for Multicusp ion source to produce intense beams of negative hydrogen ions (H-). A higher electron temperature and density given by a better plasma confinement leads to the higher efficiencies of the ionization and the production of highly charged ions. We have performed Femlab simulations of the magnetic flux density from permanent magnet used for a Multicusp ion source, plasma confinement and trapping of fast electrons by the magnetic field.

  10. Positron annihilation lifetime spectroscopy source correction determination: A simulation study

    Science.gov (United States)

    Kanda, Gurmeet S.; Keeble, David J.

    2016-02-01

    Positron annihilation lifetime spectroscopy (PALS) can provide sensitive detection and identification of vacancy-related point defects in materials. These measurements are normally performed using a positron source supported, and enclosed by, a thin foil. Annihilation events from this source arrangement must be quantified and are normally subtracted from the spectrum before analysis of the material lifetime components proceeds. Here simulated PALS spectra reproducing source correction evaluation experiments have been systematically fitted and analysed using the packages PALSfit and MELT. Simulations were performed assuming a single lifetime material, and for a material with two lifetime components. Source correction terms representing a directly deposited source and various foil supported sources were added. It is shown that in principle these source terms can be extracted from suitably designed experiments, but that fitting a number of independent, nominally identical, spectra is recommended.

  11. Bacterial swarmer cells in confinement: A mesoscale hydrodynamic simulation study

    CERN Document Server

    Eisenstecken, Thomas; Winkler, Roland G

    2016-01-01

    A wide spectrum of Peritrichous bacteria undergo considerable physiological changes when they are inoculated onto nutrition-rich surfaces and exhibit a rapid and collective migration denoted as swarming. Thereby, the length of such swarmer cells and their number of flagella increases substantially. In this article, we investigated the properties of individual E. coli-type swarmer cells confined between two parallel walls via mesoscale hydrodynamic simulations, combining molecular dynamics simulations of the swarmer cell with the multiparticle particle collision dynamics approach for the embedding fluid. E. coli-type swarmer cells are three-times longer than their planktonic counter parts, but their flagella density is comparable. By varying the wall separation, we analyze the confinement effect on the flagella arrangement, on the distribution of cells in the gap between the walls, and on the cell dynamics. We find only a weak dependence of confinement on the bundle structure and dynamics. The distribution of ...

  12. Thermal stability of silicon nanowires:atomistic simulation study

    Institute of Scientific and Technical Information of China (English)

    Liu Wen-Liang; Zhang Kai-Wang; Zhong Jian-Xin

    2009-01-01

    Using the Stillinger-Weber (SW) potential model, we investigate the thermal stability of pristine silicon nanowires based on classical molecular dynamics (MD) simulations. We explore the structural evolutions and the Lindemann indices of silicon nanowires at different temperatures in order to unveil atomic-level melting behaviour of silicon nanowires.The simulation results show that silicon nanowires with surface reconstructions have higher thermal stability than those without surface reconstructions, and that silicon nanowires with perpendicular dimmer rows on the two (100) surfaces have somewhat higher thermal stability than nanowires with parallel dimmer rows on the two (100) surfaces. Furthermore, the melting temperature of silicon nanowires increases as their diameter increases and reaches a saturation value close to the melting temperature of bulk silicon. The value of the Lindemann index for melting silicon nanowires is 0.037.

  13. Simulation and Experimental Study on Cavitating Water Jet Nozzle

    Science.gov (United States)

    Zhou, Wei; He, Kai; Cai, Jiannan; Hu, Shaojie; Li, Jiuhua; Du, Ruxu

    2017-01-01

    Cavitating water jet technology is a new kind of water jet technology with many advantages, such as energy-saving, efficient, environmentally-friendly and so on. Based on the numerical simulation and experimental verification in this paper, the research on cavitating nozzle has been carried out, which includes comparison of the cleaning ability of the cavitating jet and the ordinary jet, and comparison of cavitation effects of different structures of cavitating nozzles.

  14. A study on naphtha catalytic reforming reactor simulation and analysis

    OpenAIRE

    Liang, Ke-min; Guo, Hai-Yan; Pan, Shi-Wei

    2005-01-01

    A naphtha catalytic reforming unit with four reactors in series is analyzed. A physical model is proposed to describe the catalytic reforming radial flow reactor. Kinetics and thermodynamics equations are selected to describe the naphtha catalytic reforming reactions characteristics based on idealizing the complex naphtha mixture by representing the paraffin, naphthene, and aromatic groups by single compounds. The simulation results based above models agree very well with actual operation uni...

  15. A study on naphtha catalytic reforming reactor simulation and analysis.

    Science.gov (United States)

    Liang, Ke-min; Guo, Hai-yan; Pan, Shi-wei

    2005-06-01

    A naphtha catalytic reforming unit with four reactors in series is analyzed. A physical model is proposed to describe the catalytic reforming radial flow reactor. Kinetics and thermodynamics equations are selected to describe the naphtha catalytic reforming reactions characteristics based on idealizing the complex naphtha mixture by representing the paraffin, naphthene, and aromatic groups by single compounds. The simulation results based above models agree very well with actual operation unit data.

  16. Study and Analysis on Naphtha Catalytic Reforming Reactor Simulation

    Institute of Scientific and Technical Information of China (English)

    Liang Ke min; Song Yongji; Pan Shiwei

    2004-01-01

    A naphtha catalytic reforming unit with four reactors connected in series is analyzed. A physical model is proposed to describe the catalytic reforming radial flow reactor. Kinetics and thermodynamics equations are selected to describe the naphtha catalytic reforming reaction characteristics based on idealizing the complex naphtha mixture to represent the paraffin, naphthene, and aromatic groups with individual compounds. The simulation results based on above models agree very well with actual operating data of process unit.

  17. A study on naphtha catalytic reforming reactor simulation and analysis

    Institute of Scientific and Technical Information of China (English)

    LIANG Ke-min; GUO Hai-yan; PAN Shi-wei

    2005-01-01

    A naphtha catalytic reforming unit with four reactors in series is analyzed. A physical model is proposed to describe the catalytic reforming radial flow reactor. Kinetics and thermodynamics equations are selected to describe the naphtha catalytic reforming reactions characteristics based on idealizing the complex naphtha mixture by representing the paraffin, naphthene, and aromatic groups by single compounds. The simulation results based above models agree very well with actual operation unit data.

  18. Annotated Bibliography of Vessel Simulation Studies Used in Channel Design.

    Science.gov (United States)

    1986-07-01

    No. 24-8012-01. Kings Point, NY: National Maritime Research Center. The Nueces County Navigation District No. I proposes to widen and deepen the...Simulation Evaluation of Proposed Port Arun LNG Terminal Expansion . CAORP Report No. 75-7808-01. Kings Point, NY: National Maritime Research Center...transportation flow patterns, economic conditiohs and trends, navigation conditions, soil and bathymetric conditions, hydrographic and meteorological

  19. Simulator Training Requirements and Effectiveness Study (STRES): Future Research Plans.

    Science.gov (United States)

    1981-01-01

    simulation technology. The AFHRL/OT program, using the ASPT and SAAC devices, is already embarked on an extensive visual technology research effort, one...facilities that would be required to conduct the research described. In some cases, specific research devices are mentioned, such as ASPT , SAAC, and the...configuration of a particular device cannot be foreseen at this point (e.g., the ASPT might have a variety of possible specific cockpit configurations), no

  20. Improved ant colony algorithm and its simulation study

    Science.gov (United States)

    Wang, Zongjiang

    2013-03-01

    Ant colony algorithm is development a new heuristic algorithm through simulation ant foraging. For its convergence rate slow, easy to fall into local optimal solution proposed for the adjustment of key parameters, pheromone update to improve the way and through the issue of TSP experiments, results showed that the improved algorithm has better overall search capabilities and demonstrated the feasibility and effectiveness of this method.

  1. Water at an electrochemical interface - a simulation study

    Energy Technology Data Exchange (ETDEWEB)

    Willard, Adam; Reed, Stewart; Madden, Paul; Chandler, David

    2008-08-22

    The results of molecular dynamics simulations of the properties of water in an aqueous ionic solution close to an interface with a model metallic electrode are described. In the simulations the electrode behaves as an ideally polarizable hydrophilic metal, supporting image charge interactions with charged species, and it is maintained at a constant electrical potential with respect to the solution so that the model is a textbook representation of an electrochemical interface through which no current is passing. We show how water is strongly attracted to and ordered at the electrode surface. This ordering is different to the structure that might be imagined from continuum models of electrode interfaces. Further, this ordering significantly affects the probability of ions reaching the surface. We describe the concomitant motion and configurations of the water and ions as functions of the electrode potential, and we analyze the length scales over which ionic atmospheres fluctuate. The statistics of these fluctuations depend upon surface structure and ionic strength. The fluctuations are large, sufficiently so that the mean ionic atmosphere is a poor descriptor of the aqueous environment near a metal surface. The importance of this finding for a description of electrochemical reactions is examined by calculating, directly from the simulation, Marcus free energy profiles for transfer of charge between the electrode and a redox species in the solution and comparing the results with the predictions of continuum theories. Significant departures from the electrochemical textbook descriptions of the phenomenon are found and their physical origins are characterized from the atomistic perspective of the simulations.

  2. FES-Assisted Walking with Spring Brake Orthosis: Simulation Studies

    OpenAIRE

    R. Jailani; Tokhi, M.O.; Gharooni, S. C.; B.S.K.K Ibrahim

    2011-01-01

    This paper presents a simulation of bipedal locomotion to generate stimulation pulses for activating muscles for paraplegic walking with wheel walker using functional electrical stimulation (FES) with spring brake orthosis (SBO). A new methodology for paraplegic gait, based on exploiting natural dynamics of human gait, is introduced. The work is a first effort towards restoring natural like swing phase in paraplegic gait through a new hybrid orthosis, referred to as spring brake orthosis (SBO...

  3. Data Systems Dynamic Simulation - A total system for data system design assessments and trade studies

    Science.gov (United States)

    Hooper, J. W.; Rowe, D. W.

    1978-01-01

    Data Systems Dynamic Simulation is a simulation system designed to reduce cost and time and increase the confidence and comprehensiveness of Data Systems Simulation. It is designed to simulate large data processing and communications systems from end-to-end or by subsystem. Those features relevant to system timing, control, sizing, personnel support activities, cost and external influences are modeled. Emphasis is placed on ease of use, comprehensive system performance measures, and extensive post simulation analysis capability. The system has been used to support trade studies of the NASA data system needs in the 1985 to 1990 time frame.

  4. Using Simulation to Study, Design and Invent Organizations

    Directory of Open Access Journals (Sweden)

    Raymond Elliot Levitt

    2012-12-01

    Full Text Available Over the past 50 years, computational modeling and simulation have had enormous impact on the advancement of knowledge in fields such as physics, chemistry, and subsequently, biology. After simulation models had been validated in these fields, they were rapidly adopted as powerful new tools to enhance and extend engineering practice. Might social science and management practice be following a similar trajectory? This article argues that progressively validated, calibrated, and refined computational simulation models of organizations are rapidly evolving into: (a powerful new kinds of organizational analysis tools to support organization design by predicting the performance of specific organizational configurations for a given task and environment; (b flexible new kinds of organizational theorem provers for validating extant organization theory and developing new theory; and (c organizational test benches that can be used to explore the efficacy of hypothetical organizational configurations that can address the unprecedented demands of new and emerging work processes in the presence of high levels of uncertainty and ambiguity.

  5. Large Eddy Simulation and Study of the Urban Boundary Layer

    Institute of Scientific and Technical Information of China (English)

    苗世光; 蒋维楣

    2004-01-01

    Based on a pseudo-spectral large eddy simulation (LES) model, an LES model with an anisotropy turbulent kinetic energy (TKE) closure model and an explicit multi-stage third-order Runge-Kutta scheme is established. The modeling and analysis show that the LES model can simulate the planetary boundary layer (PBL) with a uniform underlying surface under various stratifications very well. Then, similar to the description of a forest canopy, the drag term on momentum and the production term of TKE by subgrid city buildings are introduced into the LES equations to account for the area-averaged effect of the subgrid urban canopy elements and to simulate the meteorological fields of the urban boundary layer (UBL). Numerical experiments and comparison analysis show that: (1) the result from the LES of the UBL with a proposed formula for the drag coefficient is consistent and comparable with that from wind tunnel experiments and an urban subdomain scale model; (2) due to the effect of urban buildings, the wind velocity near the canopy is decreased, turbulence is intensified, TKE, variance, and momentum flux are increased, the momentum and heat flux at the top of the PBL are increased, and the development of the PBL is quickened; (3) the height of the roughness sublayer (RS) of the actual city buildings is the maximum building height (1.5-3 times the mean building height), and a constant flux layer (CFL) exists in the lower part of the UBL.

  6. Simulation study and function analysis of the dynamic aortic valve

    Institute of Scientific and Technical Information of China (English)

    XIA Dongdong; BAI Jing

    2006-01-01

    The dynamic aortic valve (DAV) is a new left ventricular assist device, a micro-axial blood pump implemented at the position of the aortic valve, pumping blood from the left ventricle into the aortic artery. The present dynamic aortic valve operates at 7 different rotation speeds, ranging from 3000 r/min (speed 1) to 9000 r/min (speed 7). Because in vivo experiments need a lot of live animals and take a long period of time, modeling and simulation have been widely used to simulate and analyze hydra-dynamic property of the DAV and its assisting effects. With the measurements from the mock circulatory loop, a mathematic model of the DAV is established and embedded into the previously developed canine circulatory system. Using this model, the effect of the DAV on the failing heart at each rotation speed level is investigated. The vital cardiac variables are computed and compared with in vivo experimental results, which are in good agreement with an acceptable difference mostly 15 %. The establishment of the DAV model and its simulation are useful for further improvement of the DAV device.

  7. MHD simulation studies of z-pinch shear flow stabilization

    Science.gov (United States)

    Paraschiv, I.; Bauer, B. S.; Sotnikov, V. I.; Makhin, V.; Siemon, R. E.

    2003-10-01

    The development of the m=0 instability in a z-pinch in the presence of sheared plasma flows is investigated with the aid of a two-dimensional magnetohydrodynamic (MHD) simulation code (MHRDR). The linear growth rates are compared to the results obtained by solving the ideal MHD linearized equations [1] and to the results obtained using a 3D hybrid simulation code [2]. The instability development is followed into the nonlinear regime where its growth and saturation are examined. [1] V.I. Sotnikov, I. Paraschiv, V. Makhin, B.S. Bauer, J.-N. Leboeuf, and J.M. Dawson, "Linear analysis of sheared flow stabilization of global magnetohydrodynamic instabilities based on the Hall fluid mode", Phys. Plasmas 9, 913 (2002). [2] V.I. Sotnikov, V. Makhin, B.S. Bauer, P. Hellinger, P. Travnicek, V. Fiala, J.-N. Leboeuf, "Hybrid Simulations of Current-Carrying Instabilities in Z-pinch Plasmas with Sheared Axial Flow", AIP Conference Proceedings, Volume 651, Dense Z-Pinches: 5th International Conference on Dense Z-Pinches, edited by J. Davis et al., page 396, June 2002.

  8. Factor Xa: Simulation studies with an eye to inhibitor design

    Science.gov (United States)

    Daura, Xavier; Haaksma, Eric; van Gunsteren, Wilfred F.

    2000-08-01

    Factor Xa is a serine protease which activates thrombin and plays a key regulatory role in the blood-coagulation cascade. Factor Xa is at the crossroads of the extrinsic and intrinsic pathways of coagulation and, hence, has become an important target for the design of anti-thrombotics (inhibitors). It is not known to be involved in other processes than hemostasis and its binding site is different to that of other serine proteases, thus facilitating selective inhibition. The design of high-affinity selective inhibitors of factor Xa requires knowledge of the structural and dynamical characteristics of its active site. The three-dimensional structure of factor Xa was resolved by X-ray crystallography and refined at 2.2 Å resolution by Padmanabhan and collaborators. In this article we present results from molecular dynamics simulations of the catalytic domain of factor Xa in aqueous solution. The simulations were performed to characterise the mobility and flexibility of the residues delimiting the unoccupied binding site of the enzyme, and to determine hydrogen bonding propensities (with protein and with solvent atoms) of those residues in the active site that could interact with a substrate or a potential inhibitor. The simulation data is aimed at facilitating the design of high-affinity selective inhibitors of factor Xa.

  9. A study for production simulation model generation system based on data model at a shipyard

    Directory of Open Access Journals (Sweden)

    Myung-Gi Back

    2016-09-01

    Full Text Available Simulation technology is a type of shipbuilding product lifecycle management solution used to support production planning or decision-making. Normally, most shipbuilding processes are consisted of job shop production, and the modeling and simulation require professional skills and experience on shipbuilding. For these reasons, many shipbuilding companies have difficulties adapting simulation systems, regardless of the necessity for the technology. In this paper, the data model for shipyard production simulation model generation was defined by analyzing the iterative simulation modeling procedure. The shipyard production simulation data model defined in this study contains the information necessary for the conventional simulation modeling procedure and can serve as a basis for simulation model generation. The efficacy of the developed system was validated by applying it to the simulation model generation of the panel block production line. By implementing the initial simulation model generation process, which was performed in the past with a simulation modeler, the proposed system substantially reduced the modeling time. In addition, by reducing the difficulties posed by different modeler-dependent generation methods, the proposed system makes the standardization of the simulation model quality possible.

  10. Dynamic rod worth simulation study for a sodium-cooled TRU burner

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Sang Ji; Ha, Pham Nhu Viet, E-mail: phamha@kaeri.re.kr; Lee, Min Jae; Kang, Chang Mu

    2015-12-15

    Highlights: • Dynamic rod worth calculation methodology for a sodium-cooled TRU burner was developed. • The spatial weighting functions were relatively insensitive to control rods position. • The simulated pseudo detector response agreed well with the calculated core power. • The simulated dynamic rod worths compared well against the simulated static values. • Impact of individual detector on the simulated dynamic worth was evaluated. - Abstract: This paper presents a preliminary dynamic rod worth simulation study for a TRU burner core mockup of the PGSFR (Korean Prototype Gen-IV Sodium-cooled Fast Reactor) named BFS-76-1A so as to establish a calculation methodology for evaluating the rod worth of the PGSFR. The simulation method was mainly based on a three-dimensional multi-group nodal diffusion transient code for fast reactors in which the rod drop simulation for the BFS-76-1A was performed and all the fuel assemblies were taken into account for the detector response calculation. Then the dynamic rod worths were inferred from the simulated detector responses using an inverse point kinetics model and compared against the simulated static worths. The results show good agreement between the simulated pseudo detector response and the calculated core power as well as between the simulated dynamic and static rod worths, and thus indicate that the dynamic rod worth simulation method developed in this work can be applied to the rod worth estimation and validation for the PGSFR.

  11. A Simple, Inexpensive, and Field-Relevant Microcosm Tidal Simulator for Use in Marsh Macrophyte Studies

    Directory of Open Access Journals (Sweden)

    Rachel M. MacTavish

    2014-10-01

    Full Text Available Premise of the study: A microcosm unit with tidal simulation was developed to address the challenge of maintaining ecologically relevant tidal regimes while performing controlled greenhouse experiments on smooth cordgrass, Spartina alterniflora. Methods and Results: We designed a simple, inexpensive, easily replicated microcosm unit with tidal simulation and tested whether S. alterniflora growth in microcosms with tidal simulation was similar to that of tidally influenced plants in the field on Sapelo Island, Georgia. After three months of exposure to either natural or simulated tidal treatment, plants in microcosms receiving tidal simulation had similar stem density, height, and above- and belowground biomass to plants in field plots. Conclusions: The tidal simulator developed may provide an inexpensive, effective method for conducting studies on S. alterniflora and other tidally influenced plants in controlled settings to be used not only to complement field studies, but also in locations without coastal access.

  12. Molecular simulation studies on thermophysical properties with application to working fluids

    CERN Document Server

    Raabe, Gabriele

    2017-01-01

    This book discusses the fundamentals of molecular simulation, starting with the basics of statistical mechanics and providing introductions to Monte Carlo and molecular dynamics simulation techniques. It also offers an overview of force-field models for molecular simulations and their parameterization, with a discussion of specific aspects. The book then summarizes the available know-how for analyzing molecular simulation outputs to derive information on thermophysical and structural properties. Both the force-field modeling and the analysis of simulation outputs are illustrated by various examples. Simulation studies on recently introduced HFO compounds as working fluids for different technical applications demonstrate the value of molecular simulations in providing predictions for poorly understood compounds and gaining a molecular-level understanding of their properties. This book will prove a valuable resource to researchers and students alike.

  13. Simulation and experimental study of electro-pneumatic valve used in air-powered engine

    Institute of Scientific and Technical Information of China (English)

    Ping-lu CHEN; Xiao-li YU; Lin LIU

    2009-01-01

    To evaluate the performance of newly designed electro-pneumatic valves (EPVs) for the air-powered engine (APE) and study laws of parameters affecting them, a simulation model was established based on the thermodynamics and mechanics theories. Experiments were set up to determine the instantaneous effective orifice area of solenoid valve by the constant volume discharge method. The simulation model was also validated by comparing the measured displacement curve with the simulated displacement curve of the valve in the pressure of 0.16 and 0.49 MPa. Simulation and experimental results showed that maximum working frequency of the designed EPV could reach 30 Hz corresponding to 2000 r/rain of engine rotating speed. Based on simulation results, impacts of temperature and pressure of control air on delay time, full opening/closing time and seating velocity of EPV were analyzed. The simulation model could also act as EPV simulation prototype in designing the air exchange control system of APE.

  14. Phase coexistence properties of liquid mercury: a simulation study

    Institute of Scientific and Technical Information of China (English)

    Jean-Louis Bretonnet; Jean-Marc Bomont

    2006-01-01

    The thermophysical properties of expanded liquid mercury have been investigated along the liquid-vapor coexis tence curve by using Monte Carlo and Molecular Dynamic simulations. For the purpose, an empirical state dependent interatomic potential for the region of dense metallic liquid is used, while the state dependence is not necessary near the critical point. In order to test the validity of this potential, we determine the surface layering and the sound velocity, two properties very sensitive to the choice of the potential. Our results are in quite good agreement with other theoretical results and to the experimental data available in the literature.

  15. Multivariate Meta-Analysis of Genetic Association Studies: A Simulation Study.

    Science.gov (United States)

    Neupane, Binod; Beyene, Joseph

    2015-01-01

    In a meta-analysis with multiple end points of interests that are correlated between or within studies, multivariate approach to meta-analysis has a potential to produce more precise estimates of effects by exploiting the correlation structure between end points. However, under random-effects assumption the multivariate estimation is more complex (as it involves estimation of more parameters simultaneously) than univariate estimation, and sometimes can produce unrealistic parameter estimates. Usefulness of multivariate approach to meta-analysis of the effects of a genetic variant on two or more correlated traits is not well understood in the area of genetic association studies. In such studies, genetic variants are expected to roughly maintain Hardy-Weinberg equilibrium within studies, and also their effects on complex traits are generally very small to modest and could be heterogeneous across studies for genuine reasons. We carried out extensive simulation to explore the comparative performance of multivariate approach with most commonly used univariate inverse-variance weighted approach under random-effects assumption in various realistic meta-analytic scenarios of genetic association studies of correlated end points. We evaluated the performance with respect to relative mean bias percentage, and root mean square error (RMSE) of the estimate and coverage probability of corresponding 95% confidence interval of the effect for each end point. Our simulation results suggest that multivariate approach performs similarly or better than univariate method when correlations between end points within or between studies are at least moderate and between-study variation is similar or larger than average within-study variation for meta-analyses of 10 or more genetic studies. Multivariate approach produces estimates with smaller bias and RMSE especially for the end point that has randomly or informatively missing summary data in some individual studies, when the missing data

  16. Magnetic force microscopy and simulation studies on Co$_{50}$Fe$_{50}$ elliptical nanomagnets

    Indian Academy of Sciences (India)

    N V S S SESHAGIRI RAO; V SATYA NARAYANA MURTHY; Y J V S RAMAKRISHNA SHARMA

    2016-06-01

    We studied the magnetization reversal mechanism of single-layered Co50Fe50 nanomagnets by measuring the magnetization reversal and using the micromagnetic simulations. The magnetization reversal strongly depends on the thickness of the nanomagnets. In the remanent state, the magnetic force microscopy studies and the simulation data showed the formation of single and vortex states depending on the thickness of nanomagnets.

  17. Increasing Interest in Social Studies: Social Perspective Taking and Self-Efficacy in Stimulating Simulations

    Science.gov (United States)

    Gehlbach, Hunter; Brown, Scott W.; Ioannou, Andri; Boyer, Mark A.; Hudson, Natalie; Niv-Solomon, Anat; Maneggia, Donalyn; Janik, Laura

    2008-01-01

    This study examined the potential of simulations to bolster interest in middle school social studies classrooms. Using a pre-post-design, we examined 305 middle school students (49% female) who participated in the web-based "GlobalEd" simulation. In contrast to the motivation declines middle school students usually experience, participants in this…

  18. Simulation studies of the interaction of antimicrobial peptides and lipid bilayers

    NARCIS (Netherlands)

    La Rocca, P; Biggin, PC; Tieleman, DP; Sansom, MSP

    1999-01-01

    Experimental studies of a number of antimicrobial peptides are sufficiently detailed to allow computer simulations to make a significant contribution to understanding their mechanisms of action at an atomic level. In this review we focus on simulation studies of alamethicin, melittin, dermaseptin an

  19. Statistical Analysis of Large Simulated Yield Datasets for Studying Climate Effects

    NARCIS (Netherlands)

    Makowski, D.; Asseng, S.; Ewert, F.; Bassu, S.; Durand, J.L.; Martre, P.; Adam, M.; Aggarwal, P.K.; Angulo, C.; Baron, C.; Basso, B.; Bertuzzi, P.; Biernath, C.; Boogaard, H.; Boote, K.J.; Brisson, N.; Cammarano, D.; Challinor, A.J.; Conijn, J.G.; Corbeels, M.; Deryng, D.; Sanctis, De G.; Doltra, J.; Gayler, S.; Goldberg, R.; Grassini, P.; Hatfield, J.L.; Heng, L.; Hoek, S.B.; Hooker, J.; Hunt, L.A.; Ingwersen, J.; Izaurralde, C.; Jongschaap, R.E.E.; Jones, J.W.; Kemanian, R.A.; Kersebaum, K.C.; Kim, S.H.; Lizaso, J.; Müller, C.; Naresh Kumar, S.; Nendel, C.; O'Leary, G.J.; Olesen, J.E.; Osborne, T.M.; Palosuo, T.; Pravia, M.V.; Priesack, E.; Ripoche, D.; Rosenzweig, C.; Ruane, A.C.; Sau, F.; Semenov, M.A.; Shcherbak, I.; Steduto, P.; Stöckle, C.O.; Stratonovitch, P.; Streck, T.; Supit, I.; Tao, F.; Teixeira, E.; Thorburn, P.; Timlin, D.; Travasso, M.; Roetter, R.P.; Waha, K.; Wallach, D.; White, J.W.; Williams, J.R.; Wolf, J.

    2015-01-01

    Many simulation studies have been carried out to predict the effect of climate change on crop yield. Typically, in such study, one or several crop models are used to simulate series of crop yield values for different climate scenarios corresponding to different hypotheses of temperature, CO2

  20. Simulation studies for the PANDA endcap disc DIRC

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, Mustafa; Biguenko, Klim; Dueren, Michael; Hayrapetyan, Avetik; Kroeck, Benno; Merle, Oliver; Rieke, Julian [II. Physikalisches Institut, Justus-Liebig-Universitaet, Giessen (Germany); Foehl, Klaus [CERN, Genf (Switzerland); Collaboration: PANDA-Collaboration

    2015-07-01

    The physics program of the PANDA detector at the future FAIR facility at GSI requires excellent particle identification. For the Panda forward endcap region a novel detector type called ''Disc DIRC'' has been designed. It covers the angular range between 5 and 22 degrees and uses internally reflected Cherenkov light in order to separate pions, kaons and protons up to a momentum of 4 GeV/c. During the design phase, extensive detector simulations have been performed to optimize and evaluate the design. The simulations were done using Geant4 and the PandaRoot framework in addition with a dedicated reconstruction software. An important aspect was the optimization of the imaging while taking the geometrical tolerances of the manufacturing process of the final detector into account. The main focus lies on the optimization process of the cylindrical and polynomial focussing optics at the edges of the detector plate, which has been performed with the merit function of a raytracer called PyOptics, written by one of the group members.

  1. Experimental study on interaction between simulated sandstone and acidic fluid

    Institute of Scientific and Technical Information of China (English)

    Zhang Yongwang; Zeng Jianhu; Yu Bingsong

    2009-01-01

    In order to investigate the controlling mechanism of temperature, fluid and other factors on water-rock interaction in the diagenetic process, we performed a series of simulated experiments on the interaction between two kinds of fluids with different salinity and a composite mineral system (simulated sandstone), which contains albite, K-feldspar and other minerals. The experimental results showed that acidity was the most important factor that affected the dissolution of minerals in the composite mineral system. The lower the pH value, the more easily the minerals dissolved. At the same pH value, the dissolution abilities of different acids for various mineral components were also different. Compared to hydrochloric acid (inorganic acid), oxalic acid (organic acid) was more able to dissolve aluminosilicate minerals. However, the dissolution ability of oxalic acid for carbonate minerals was lower than that of hydrochloric acid. In the process of fluid-rock interaction,dissolution of feldspar was relatively complicated. Increase of temperature would accelerate the dissolution of feldspar. Under acidic conditions, albite had a higher dissolution rate than K-feldspar. K-feldspar could dissolve and convert into montmorillonite and kaolinite, while albite could dissolve and convert into kaolinite both at 40℃ and 80℃. Presence of organic acid, and decrease of pH value and water salinity were all favorable for the dissolution of feldspar, but weakened the ability to form clay minerals.

  2. A New Mathematical Simulation Approach for Thermal Cracking Furnace Studies

    Institute of Scientific and Technical Information of China (English)

    LanXingying; XuChunming; GaoJinsen; ZhangHongmei

    2005-01-01

    Thermal cracking of hydrocarbons for olefin production is normally carried out in long reactor tubes suspended in a large gas fired furnace. In this paper, a coupled furnace-reactor mathematical model based on a computational fluid dynamics (CFD) technique is developed to simulate the complex fluid dynamics phenomena in the thermal cracking furnace. The model includes mass transfer, momentum transfer, and heat transfer, as well as thermal cracking reactions, fuel combustion and radiative heat transfer. The rationality and reliability of the mathematical model is confirmed by the approximate agreement of predicted data and industrial data. The coupled furnace-reactor simulation revealed the details of both the transfer and reaction processes taking place in the thermal cracking furnace. The results indicate highly nonuniform distribution of the flue-gas velocity, concentration and temperature in the furnace, which cause nonuniform distribution of tube skin temperature and heat flux of the reactor tubes. Profiles of oil-gas velocity,pressure, temperature and product yields in the lengthwise direction of the reactor tube are obtained. Furthermore, in the radial direction steep velocity and temperature gradients and relatively slight gradients of species concentration are found.In conclusion, the model can provide more information on the fluid dynamics and reaction behavior in the thermal cracking furnace, and guidance for the design and improvement of thermal cracking furnaces.

  3. Molecular Simulation Studies of Covalently and Ionically Grafted Nanoparticles

    Science.gov (United States)

    Hong, Bingbing

    Solvent-free covalently- or ionically-grafted nanoparticles (CGNs and IGNs) are a new class of organic-inorganic hybrid composite materials exhibiting fluid-like behaviors around room temperature. With similar structures to prior systems, e.g. nanocomposites, neutral or charged colloids, ionic liquids, etc, CGNs and IGNs inherit the functionality of inorganic nanopariticles, the facile processibility of polymers, as well as conductivity and nonvolatility from their constituent materials. In spite of the extensive prior experimental research having covered synthesis and measurements of thermal and dynamic properties, little progress in understanding of these new materials at the molecular level has been achieved, because of the lack of simulation work in this new area. Atomistic and coarse-grained molecular dynamics simulations have been performed in this thesis to investigate the thermodynamics, structure, and dynamics of these systems and to seek predictive methods predictable for their properties. Starting from poly(ethylene oxide) oligomers (PEO) melts, we established atomistic models based on united-atom representations of methylene. The Green-Kubo and Einstein-Helfand formulas were used to calculate the transport properties. The simulations generate densities, viscosities, diffusivities, in good agreement with experimental data. The chain-length dependence of the transport properties suggests that neither Rouse nor reptation models are applicable in the short-chain regime investigated. Coupled with thermodynamic integration methods, the models give good predictions of pressure-composition-density relations for CO 2 + PEO oligomers. Water effects on the Henry's constant of CO 2 in PEO have also been investigated. The dependence of the calculated Henry's constants on the weight percentage of water falls on a temperature-dependent master curve, irrespective of PEO chain length. CGNs are modeled by the inclusion of solid-sphere nanoparticles into the atomistic

  4. Multi-Bunch Simulations of the ILC for Luminosity Performance Studies

    CERN Document Server

    White, Glen; Walker, Nicholas J

    2005-01-01

    To study the luminosity performance of the International Linear Collider (ILC) with different design parameters, a simulation was constructed that tracks a multi-bunch representation of the beam from the Damping Ring extraction through to the Interaction Point. The simulation code PLACET is used to simulate the LINAC, MatMerlin is used to track through the Beam Delivery System and GUINEA-PIG for the beam-beam interaction. Included in the simulation are ground motion and wakefield effects, intra-train fast feedback and luminosity-based feedback systems. To efficiently study multiple parameters/multiple seeds, the simulation is deployed on the Queen Mary High-Throughput computing cluster at Queen Mary, University of London, where 100 simultaneous simulation seeds can be run.

  5. Multi-Bunch Simulations of the ILC for Luminosity Performance Studies

    Energy Technology Data Exchange (ETDEWEB)

    White, G.; /SLAC /Queen Mary, U. of London; Walker, N.; /DESY; Schulte, D.; /CERN

    2005-07-11

    To study the luminosity performance of the International Linear Collider (ILC) with different design parameters, a simulation was constructed that tracks a multi-bunch representation of the beam from the Damping Ring extraction through to the Interaction Point. The simulation code PLACET is used to simulate the LINAC, MatMerlin is used to track through the Beam Delivery System and GUINEA-PIG for the beam-beam interaction. Included in the simulation are ground motion and wakefield effects, intra-train fast feedback and luminosity-based feedback systems. To efficiently study multiple parameters/multiple seeds, the simulation is deployed on the Queen Mary High-Throughput computing cluster at Queen Mary, University of London, where 100 simultaneous simulation seeds can be run.

  6. A computer simulation study of tilted smectic mesophases

    Energy Technology Data Exchange (ETDEWEB)

    Withers, I.M

    2000-05-01

    Results are presented from a series of simulations undertaken to determine the effect of a novel form of molecular biaxiality upon the phase behaviour of the well established Gay-Berne (GB) liquid crystal model. Firstly, the simulation of a bulk system interacting via the Internally-Rotated Gay Berne (IRGB) potential, which offers a single-site representation of a molecule rigidly constrained into a zig-zag conformation, is presented. The results of simulations performed for systems of IRGB particles with an aspect ratio of 3:1 confirm that the introduction of biaxiality into the model results in the destabilisation of the orientationally ordered phases. For particles with a sufficiently pronounced zig-zag conformation, this results in the complete destabilisation of the smectic A phase and the smectic B phase being replaced by the tilted smectic J phase. Following these observations, the effect upon the phase behaviour of increasing molecular elongation is also considered, with an increase in the aspect ratio from 3:1 to 4:1 resulting in the nematic and smectic J phases being replaced by smectic A and smectic G phases respectively. Secondly, a version of the IRGB potential modified to include a degree of molecular flexibility is considered. Results obtained from bulk systems interacting via the flexible IRGB for 3:1 and 4:1 molecules show that the introduction of flexibility results in the destabilisation of the smectic A phase and the stabilisation of the nematic and tilted hexatic phases. Finally, the effect upon the phase behaviour of the rigid IRGB model of the inclusion of a longitudinal linear quadrupole is examined. These results show that increasing quadrupole moment results in the destabilisation of the tilted hexatic phase, although the biaxial order parameter is increased with increasing quadrupole moment. There is no clear correlation between quadrupole magnitude and the other observed phase transitions, with the nematic and smectic A phases being

  7. Virus capsid dissolution studied by microsecond molecular dynamics simulations.

    Science.gov (United States)

    Larsson, Daniel S D; Liljas, Lars; van der Spoel, David

    2012-01-01

    Dissolution of many plant viruses is thought to start with swelling of the capsid caused by calcium removal following infection, but no high-resolution structures of swollen capsids exist. Here we have used microsecond all-atom molecular simulations to describe the dynamics of the capsid of satellite tobacco necrosis virus with and without the 92 structural calcium ions. The capsid expanded 2.5% upon removal of the calcium, in good agreement with experimental estimates. The water permeability of the native capsid was similar to that of a phospholipid membrane, but the permeability increased 10-fold after removing the calcium, predominantly between the 2-fold and 3-fold related subunits. The two calcium binding sites close to the icosahedral 3-fold symmetry axis were pivotal in the expansion and capsid-opening process, while the binding site on the 5-fold axis changed little structurally. These findings suggest that the dissociation of the capsid is initiated at the 3-fold axis.

  8. Interactions in charged colloidal suspensions: A molecular dynamics simulation study

    Science.gov (United States)

    Padidela, Uday Kumar; Behera, Raghu Nath

    2017-07-01

    Colloidal suspensions are extensively used in everyday life and find several applications in the pharmaceutical, chemical, food industries, etc. We present the classical molecular dynamics simulation results of the structural and transport properties of charged colloidal suspensions as a function of its size, charge and concentration. The system is viewed as a two-component (colloids and counterions) primitive model consisting of spherical colloid particle (macroion) and the counterions (micro-particles), which are treated explicitly. The solvent is treated as dielectric continuum. A systematic trend in the radial distribution functions g(r), potential of mean force W(r), different thermodynamic properties and diffusion coefficients is obtained as a function of colloid charge, size and concentration. An attractive minimum in W(r) is obtained at short interparticle distance.

  9. Auto-origami with liquid crystal elastomers: a simulation study

    Science.gov (United States)

    Konya, Andrew; Selinger, Robin

    2013-03-01

    Liquid crystal elastomers (LCE) undergo shape transformations induced by stimuli such as heating/cooling or illumination. When a non-uniform director field is imposed on a sample during crosslinking, it encodes a complex actuation trajectory which may include a combination of bends, twists, and folds along with changes in Gaussian curvature. Taking a materials-by-design approach, we perform finite element simulations to explore director geometries which produce such auto-origami behavior. By cataloging and assembling a variety of basic motifs including those identified by Modes and Warner, we design director geometries that yield a variety of target structures. Assembling a sample with domains of two LCE materials with different isotropic-nematic transition temperatures provides a means for sequencing steps in the resulting actuation choreography on heating/cooling. Supported by NSF-DMR-1106014.

  10. 3D-Simulation Studies of SNS Ring Doublet Magnets

    Energy Technology Data Exchange (ETDEWEB)

    Wang, J.G.; Tsoupas N.; Venturini, M.

    2005-05-05

    The accumulator ring of the Spallation Neutron Source (SNS) at ORNL employs in its straight sections closely packed quadrupole doublemagnets with large aperture of R=15.1 cm an relatively short iron-to-iron distance of 51.4 cm. These quads have much extended fringe field, and magnetic interferences among them in the doublet assemblies is not avoidable. Though each magnet in the assemblies has been individually mapped to high accuracy of lower than 0.01 percent level, the experimental data including the magnetic interference effect will not be available. We have performed 3D computing simulations on a quadrupole doublet model in order to assess the degree of the interference and to obtain relevant data for the SNS commissioning and operation.

  11. Hybrid Computational Simulation and Study of Terahertz Pulsed Photoconductive Antennas

    Science.gov (United States)

    Emadi, R.; Barani, N.; Safian, R.; Nezhad, A. Zeidaabadi

    2016-08-01

    A photoconductive antenna (PCA) has been numerically investigated in the terahertz (THz) frequency band based on a hybrid simulation method. This hybrid method utilizes an optoelectronic solver, Silvaco TCAD, and a full-wave electromagnetic solver, CST. The optoelectronic solver is used to find the accurate THz photocurrent by considering realistic material parameters. Performance of photoconductive antennas and temporal behavior of the excited photocurrent for various active region geometries such as bare-gap electrode, interdigitated electrodes, and tip-to-tip rectangular electrodes are investigated. Moreover, investigations have been done on the center of the laser illumination on the substrate, substrate carrier lifetime, and diffusion photocurrent associated with the carriers temperature, to achieve efficient and accurate photocurrent. Finally, using the full-wave electromagnetic solver and the calculated photocurrent obtained from the optoelectronic solver, electromagnetic radiation of the antenna and its associated detected THz signal are calculated and compared with a measurement reference for verification.

  12. Simulation-based study of MPTCP (Multipath TCP)

    CERN Document Server

    Chihani, Bachir

    2011-01-01

    Our current world is revolutionned by the networks which are interconnecting any machine to any other one. Nowadays equipments are plugged to the network by the way of many different network adapters (Ethernet, wifi, GSM), and network equipments are more and more interconnected to each other creating a highly mesh network. Thus, redundant paths are created between any two endpoints enabling multipath or the use of multiple paths to handle a communication. The benefits of multipath are the enhancement of robustness against failure, and minimizing communication cost. In the present work, we will talk about some solutions of multipath applied to the transport level. We will expose the most important problem facing multipath which is packet reordering, and we will also expose results of our simulations.

  13. Updated Simulation Studies of Damage Limit of LHC Tertiary Collimators

    CERN Document Server

    AUTHOR|(CDS)2085459; Bertarelli, Alessandro; Bruce, Roderik; Carra, Federico; Cerutti, Francesco; Gradassi, Paolo; Lechner, Anton; Redaelli, Stefano; Skordis, Eleftherios

    2015-01-01

    The tertiary collimators (TCTs) in the LHC, installed in front of the experiments, in standard operation intercept fractions of 10−3 halo particles. However, they risk to be hit by high-intensity primary beams in case of asynchronous beam dump. TCT damage thresholds were initially inferred from results of destructive tests on a TCT jaw, supported by numerical simulations, assuming simplified impact scenarios with one single bunch hitting the jaw with a given impact parameter. In this paper, more realistic failure conditions, including a train of bunches and taking into account the full collimation hierarchy, are used to derive updated damage limits. The results are used to update the margins in the collimation hierarchy and could thus potentially have an influence on the LHC performance.

  14. Allosteric dynamics of SAMHD1 studied by molecular dynamics simulations

    Science.gov (United States)

    Patra, K. K.; Bhattacharya, A.; Bhattacharya, S.

    2016-10-01

    SAMHD1 is a human cellular enzyme that blocks HIV-1 infection in myeloid cells and non-cycling CD4+T cells. The enzyme is an allosterically regulated triphosphohydrolase that modulates the level of cellular dNTP. The virus restriction is attributed to the lowering of the pool of dNTP in the cell to a point where reverse-transcription is impaired. Mutations in SAMHD1 are also implicated in Aicardi-Goutieres syndrome. A mechanistic understanding of the allosteric activation of the enzyme is still elusive. We have performed molecular dynamics simulations to examine the allosteric site dynamics of the protein and to examine the connection between the stability of the tetrameric complex and the Allosite occupancy.

  15. A Study on Numerical Simulation of Core-Shooting Process

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    In order to evaluate the main factors influencing the core-shooting process and to optimize the design of core boxes, the fluid-particle (air-sand) model has been built based on the two-phase flow theory. The fluid phase, air, and the particulate phase, sand granules, have been treated as a continuum. By using this model, it is possible to simulate the flow and compaction behavior of sand particles during the core-shooting process. To benchmark the calculated results, the shooting process has been recorded with a digital high speed camera, and the inlet condition of sand particles has also been achieved by using the camera. The preliminary results have showed that the calculation is in agreement with the testing results.

  16. Hybrid Computational Simulation and Study of Terahertz Pulsed Photoconductive Antennas

    Science.gov (United States)

    Emadi, R.; Barani, N.; Safian, R.; Nezhad, A. Zeidaabadi

    2016-11-01

    A photoconductive antenna (PCA) has been numerically investigated in the terahertz (THz) frequency band based on a hybrid simulation method. This hybrid method utilizes an optoelectronic solver, Silvaco TCAD, and a full-wave electromagnetic solver, CST. The optoelectronic solver is used to find the accurate THz photocurrent by considering realistic material parameters. Performance of photoconductive antennas and temporal behavior of the excited photocurrent for various active region geometries such as bare-gap electrode, interdigitated electrodes, and tip-to-tip rectangular electrodes are investigated. Moreover, investigations have been done on the center of the laser illumination on the substrate, substrate carrier lifetime, and diffusion photocurrent associated with the carriers temperature, to achieve efficient and accurate photocurrent. Finally, using the full-wave electromagnetic solver and the calculated photocurrent obtained from the optoelectronic solver, electromagnetic radiation of the antenna and its associated detected THz signal are calculated and compared with a measurement reference for verification.

  17. Design and Study of Cognitive Network Physical Layer Simulation Platform

    Directory of Open Access Journals (Sweden)

    Yongli An

    2014-01-01

    Full Text Available Cognitive radio technology has received wide attention for its ability to sense and use idle frequency. IEEE 802.22 WRAN, the first to follow the standard in cognitive radio technology, is featured by spectrum sensing and wireless data transmission. As far as wireless transmission is concerned, the availability and implementation of a mature and robust physical layer algorithm are essential to high performance. For the physical layer of WRAN using OFDMA technology, this paper proposes a synchronization algorithm and at the same time provides a public platform for the improvement and verification of that new algorithm. The simulation results show that the performance of the platform is highly close to the theoretical value.

  18. Methanol adsorption studies of electrified ACF by MD simulations

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    [1]Wang, R. Z., Jia, J. P., Teng, Y. et al., A potential solid adsorption refrigeration pair-active carbon fiber- methanol, Acta Energ. Solar. Sinica (in Chinese), 1997, 18(2): 222-227.[2]Wang, R. Z., Wu, J. Y., Xu, Y. X. et al., Experiment on a continuous heat regenerative adsorption refrigerator using spiral plate heat exchanger as adsorbers, Applied Thermal Eng., 1998, 18(1-2): 13-23.[3]Vagner, C., Finqueneisel, G., Zimny, T. et al., Isotherms and kinetics of methanol vapor adsorption on carbon fibers and activated carbons, New Carbon Materials, 2003, 18(2): 133-136.[4]Wang, D. R., Development and application of activated carbon nanofiber, Carbon (in Chinese), 2003, 1: 35-41.[5]Su, J. C., Qiu, J. Sh., Preparation of activated carbon fiber-based composite adsorbent and its gas separation performance, Carbon Techniques (in Chinese), 2001, 3: 1-4.[6]Gasteiger, J., Marsili, M., Iterative partial equalization of orbital electronegativity-a rapid access to atomic charges, Tetrahedron, 1980, 36: 3219-3288.[7]Cornell, W. D., Cieplak, P., Bayly, C. I. et al., A second generation force field for the simulation of peoteins, nucleic acids, and organic molecules, J. Am. Chem. Soc., 1995, 117: 5179-5197.[8]Ewald, P. P., Die Berechnung optischer und elektrostatischer gitterpotentiale, Ann. Phys., 1921, 64: 253-287.[9]Allen, M. P., Tildesley, D. J., Computer Simulation of Liquids, Oxford: Oxford University Press, 1987, 157-162.[10]Leach, A. R., Molecular Modelling: Principles and Applications, London: Addison Wesley Longman Limited, 1996, 294-298.

  19. Study on High-Performance Computing for Simulation of End Milling Force

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Milling Process Simulation is one of the important re search areas in manufacturing science. For the purpose of improving the prec ision of simulation and extending its usability, numerical algorithm is more and more used in the milling modeling areas. But simulative efficiency is decreasin g with increase of its complexity. As a result, application of the method is lim ited. Aimed at above question, high-efficient algorithm for milling process sim ulation is studied. It is important for milling process...

  20. Experimental Study and Simulation Principles of An Oil-Gas Multiphase Transportation System

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    - Presented is an experimental study on the performance of an oil-gas multiphase transportation system, especially on the multiphase flow patterns, multiphase pumping and multiphase metering of the system. A dynamic simulation analysis is conducted to deduce simulation parameters of the system and similarity criteria under simplified conditions are obtained. The reliability and feasibility of two-phase flow experiment with oil and natural gas simulated by water and air are discussed by using the similarity criteria.

  1. Basic study on a simulation model for the traffic stream on urban expressway merging area

    Energy Technology Data Exchange (ETDEWEB)

    Makigami, Y. [Ritsumeikan Univ., Kyoto (Japan). Faculty of Science and Engineering; Sakai, T. [Ritsumeikan Univ., Kusatsu, Shiga (Japan). Civil and Environmental SystemsJP; Ishizuka, T.

    2000-07-01

    In this study a merging traffic simulation model was developed on the results of a traffic survey covering a merging section which is located on the Central Loop of the Hanshin Expressway and often causes congestion during heavy traffic period. The merging traffic simulation model is a kind of microscopic model treating the merging model flow as compressible fluid. The merging simulation model gives very appropriate and reliable results indicating the effect of improvement plan for reducing traffic congestion. (orig.)

  2. DWPF SIMULANT CPC STUDIES FOR SB7B

    Energy Technology Data Exchange (ETDEWEB)

    Koopman, D.

    2011-11-01

    Lab-scale DWPF simulations of Sludge Batch 7b (SB7b) processing were performed. Testing was performed at the Savannah River National Laboratory - Aiken County Technology Laboratory (SRNL-ACTL). The primary goal of the simulations was to define a likely operating window for acid stoichiometry for the DWPF Sludge Receipt and Adjustment Tank (SRAT). In addition, the testing established conditions for the SRNL Shielded Cells qualification simulation of SB7b-Tank 40 blend, supported validation of the current glass redox model, and validated the coupled process flowsheet at the nominal acid stoichiometry. An acid window of 105-140% by the Koopman minimum acid (KMA) equation (107-142% DWPF Hsu equation) worked for the sludge-only flowsheet. Nitrite was present in the SRAT product for the 105% KMA run at 366 mg/kg, while SME cycle hydrogen reached 94% of the DWPF Slurry Mix Evaporator (SME) cycle limit in the 140% KMA run. The window was determined for sludge with added caustic (0.28M additional base, or roughly 12,000 gallons 50% NaOH to 820,000 gallons waste slurry). A suitable processing window appears to be 107-130% DWPF acid equation for sludge-only processing allowing some conservatism for the mapping of lab-scale simulant data to full-scale real waste processing including potentially non-conservative noble metal and mercury concentrations. This window should be usable with or without the addition of up to 7,000 gallons of caustic to the batch. The window could potentially be wider if caustic is not added to SB7b. It is recommended that DWPF begin processing SB7b at 115% stoichiometry using the current DWPF equation. The factor could be increased if necessary, but changes should be made with caution and in small increments. DWPF should not concentrate past 48 wt.% total solids in the SME cycle if moderate hydrogen generation is occurring simultaneously. The coupled flowsheet simulation made more hydrogen in the SRAT and SME cycles than the sludge-only run with the

  3. Realization of a Desktop Flight Simulation System for Motion-Cueing Studies

    Directory of Open Access Journals (Sweden)

    Berkay Volkaner

    2016-05-01

    Full Text Available Parallel robotic mechanisms are generally used in flight simulators with a motion-cueing algorithm to create an unlimited motion feeling of a simulated medium in a bounded workspace of the simulator. A major problem in flight simulators is that the simulation has an unbounded space and the manipulator has a limited one. Using a washout filter in the motion-cueing algorithm overcomes this. In this study, a low-cost six degrees of freedom (DoF desktop parallel manipulator is used to test a classical motion-cueing algorithm; the algorithm's functionality is confirmed with a Simulink real-time environment. Translational accelerations and angular velocities of the simulated medium obtained from FlightGear flight simulation software are processed through a generated washout filter algorithm and the simulated medium's motion information is transmitted to the desktop parallel robotic mechanism as a set point for each leg. The major issues of this paper are designing a desktop simulation system, controlling the parallel manipulator, communicating between the flight simulation and the platform, designing a motion-cueing algorithm and determining the parameters of the washout filters.

  4. Negotiating the role of the professional nurse: The pedagogy of simulation: a grounded theory study.

    Science.gov (United States)

    Walton, Joni; Chute, Elizabeth; Ball, Lynda

    2011-01-01

    Simulation is the mainstay of laboratory education in health sciences, yet there is a void of pedagogy-the art and science of teaching. Nursing faculty does not have adequate evidence-based resources related to how students learn through simulation. The research questions that were addressed were as follows: (a) How do students learn using simulation? (b) What is the process of learning with simulations from the students' perspective? (c) What faculty teaching styles promote learning? and (d) How can faculty support students during simulation? Grounded theory methodology was used to explore how senior baccalaureate nursing students learn using simulation. Twenty-six students participated in this research study. Sixteen nursing students who completed two semesters of simulation courses volunteered for in-depth audio-taped interviews. In addition, there were two focus groups with five senior students in each group who validated findings and identified faculty teaching styles and supportive interventions. Negotiating the Role of the Professional Nurse was the core category, which included the following phases (I) feeling like an imposter, (II) trial and error, (III) taking it seriously, (IV) transference of skills and knowledge, and (V) professionalization. Faculty traits and teaching strategies for teaching with simulation were also identified. A conceptual model of the socialization process was developed to assist faculty in understanding the ways students learn with simulation and ways to facilitate their development. These findings provide a midrange theory for the pedagogy of simulation and will help faculty gain insight and help to assimilate into teaching-learning strategies.

  5. Bayesian modeling of cost-effectiveness studies with unmeasured confounding: a simulation study.

    Science.gov (United States)

    Stamey, James D; Beavers, Daniel P; Faries, Douglas; Price, Karen L; Seaman, John W

    2014-01-01

    Unmeasured confounding is a common problem in observational studies. Failing to account for unmeasured confounding can result in biased point estimators and poor performance of hypothesis tests and interval estimators. We provide examples of the impacts of unmeasured confounding on cost-effectiveness analyses using observational data along with a Bayesian approach to correct estimation. Assuming validation data are available, we propose a Bayesian approach to correct cost-effectiveness studies for unmeasured confounding. We consider the cases where both cost and effectiveness are assumed to have a normal distribution and when costs are gamma distributed and effectiveness is normally distributed. Simulation studies were conducted to determine the impact of ignoring the unmeasured confounder and to determine the size of the validation data required to obtain valid inferences.

  6. DEPLETION POTENTIAL OF COLLOIDS:A DIRECT SIMULATION STUDY

    Institute of Scientific and Technical Information of China (English)

    LI; Wei-hua(

    2001-01-01

    [1]Asakura S, Oosawa F. Surface tension of high-poly-mer solution [J]. J Chem Phys, 1954, 22: 1255~ 1255.[2]Ye X, Narayanan T, Tong P, et al. Depletion interactions in colloid-polymer mixtures [J]. Phys Rev E, 1996, 54: 6500~6510.[3]Kaplan P D, Faucheux L P, Libchaber A J. Direct observation of the entropic potential in a binary suspension [J]. Phys Rev Lett, 1994, 73: 2793~2796.[4]Ohshima Y N, Sakagami H, Okumoto K, et al. Direct measurement of infinite simal depletion force in a colloid-polymer mixture by laser radiation pressure [J]. Phys Rev Lett, 1997, 78: 3963~3966.[5]Dinsmore A D, Yodh A G, Pine D J. Entropic control particle motion using passive surface microstructures [J]. Nature (London), 1996, 383: 239~242.[6]Dinsmore A D, Wong D T, Nelson P, et al. Hard spheres in vecicles: curvature-induced forces and particle-induced curvature [J]. Phys Rev Lett, 1998, 80: 409~412.[7]Gtzelmann B, Evans R, Dietrich S. Depletion forces in fluids [J]. Phys Rev E, 1998, 57: 6785~6800.[8]Miao Y, Cates M E, Lekkerkerker H N W. Depletion force in colloidal systems [J]. Physica A, 1995, 222: 10~24.[9]Biben J, Bladon P, Frenkel D. Depletion effects in binary hard-sphere fluids [J]. J Phys: Condens Matter, 1996, 8: 10799~10821.[10]Dickman R, Attard P, Simonian V. Entropic forces in binary hard sphere mixture: Theory and simulation [J]. J Chem Phys, 1997, 107: 205~213.[11]Bennett C H. Efficient estimation of free energy differences from Monte Carlo data [J]. J Comput Phys, 1976, 22: 245~268; see also Allen M P, Tildesley D J. Computer Simulation of Liquids (Chap.7) [M]. Oxford: Clarendon Press. 1994.

  7. Analysis of nanowire transistor based nitrogen dioxide gas sensor – A simulation study

    Directory of Open Access Journals (Sweden)

    Gaurav Saxena

    2015-06-01

    Full Text Available Sensors sensitivity, selectivity and stability has always been a prime design concern for gas sensors designers. Modeling and simulation of gas sensors aids the designers in improving their performance. In this paper, different routes for the modeling and simulation of a semiconducting gas sensor is presented. Subsequently, by employing one of the route, the response of Zinc Oxide nanowire transistor towards nitrogen dioxide ambient is simulated. In addition to the sensing mechanism, simulation study of gas species desorption by applying a recovery voltage is also presented.

  8. Simulation and identification of the fractional Brownian motion: a bibliographical and comparative study

    Directory of Open Access Journals (Sweden)

    Jean-Francois Coeurjolly

    2000-09-01

    Full Text Available We present a non exhaustive bibliographical and comparative study of the problem of simulation and identification of the fractional Brownian motion. The discussed implementation is realized within the software S-plus 3.4. A few simulations illustrate this work. Furthermore, we propose a test based on the asymptotic behavior of a self-similarity parameter's estimator to explore the quality of different generators. This procedure, easily computable, allows us to extract an efficient method of simulation. In the Appendix are described the S-plus scripts related to simulation and identification methods of the fBm.

  9. STUDY ON NUMERICAL SIMULATION OF MOLD-FILLING AND SOLIDIFICATION PROCESSES OF SHAPED CASTING

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    The latest progress on the study of numerical simulation of mold-filling and solidification process of shaped casting is reviewed. In mold-filling process simulation of castings, the SOLA-VOF algorithmis is improved in efficient free surface treatment and turbulence consideration, and parallel computational techniques are implemented to accelerate the fluid flow calculation time as well. Methods for predication of shrinkage defects of steel castings and S.G. iron castings are developed based on the solidification simulation. In order to reduce the residual stress and deformation of castings, a combined FDM/FEM method is implemented for the modelling of stresses. Numerical models for the simulation of micro-structure and prediction of mechanical properties of S.G. iron are developed. The verifications and applications of the simulation software show that the models and techniques adopted in current research work are efficient and appropriate for the numerical simulation of shaped castings.

  10. Virus capsid dissolution studied by microsecond molecular dynamics simulations.

    Directory of Open Access Journals (Sweden)

    Daniel S D Larsson

    Full Text Available Dissolution of many plant viruses is thought to start with swelling of the capsid caused by calcium removal following infection, but no high-resolution structures of swollen capsids exist. Here we have used microsecond all-atom molecular simulations to describe the dynamics of the capsid of satellite tobacco necrosis virus with and without the 92 structural calcium ions. The capsid expanded 2.5% upon removal of the calcium, in good agreement with experimental estimates. The water permeability of the native capsid was similar to that of a phospholipid membrane, but the permeability increased 10-fold after removing the calcium, predominantly between the 2-fold and 3-fold related subunits. The two calcium binding sites close to the icosahedral 3-fold symmetry axis were pivotal in the expansion and capsid-opening process, while the binding site on the 5-fold axis changed little structurally. These findings suggest that the dissociation of the capsid is initiated at the 3-fold axis.

  11. A simulator-based study of in-flight auscultation.

    Science.gov (United States)

    Tourtier, Jean-Pierre; Libert, Nicolas; Clapson, Patrick; Dubourdieu, Stéphane; Jost, Daniel; Tazarourte, Karim; Astaud, Cécil-Emmanuel; Debien, Bruno; Auroy, Yves

    2014-04-01

    The use of a stethoscope is essential to the delivery of continuous, supportive en route care during aeromedical evacuations. We compared the capability of 2 stethoscopes (electronic, Litmann 3000; conventional, Litmann Cardiology III) at detecting pathologic heart and lung sounds, aboard a C135, a medical transport aircraft. Sounds were mimicked using a mannequin-based simulator SimMan. Five practitioners examined the mannequin during a fly, with a variety of abnormalities as follows: crackles, wheezing, right and left lung silence, as well as systolic, diastolic, and Austin-Flint murmur. The comparison for diagnosis assessed (correct or wrong) between using the electronic and conventional stethoscopes were performed as a McNemar test. A total of 70 evaluations were performed. For cardiac sounds, diagnosis was right in 0/15 and 4/15 auscultations, respectively, with conventional and electronic stethoscopes (McNemar test, P = 0.13). For lung sounds, right diagnosis was found with conventional stethoscope in 10/20 auscultations versus 18/20 with electronic stethoscope (P = 0.013). Flight practitioners involved in aeromedical evacuation on C135 plane are more able to practice lung auscultation on a mannequin with this amplified stethoscope than with the traditional one. No benefit was found for heart sounds.

  12. Patchy sticky hard spheres: analytical study and Monte Carlo simulations.

    Science.gov (United States)

    Fantoni, Riccardo; Gazzillo, Domenico; Giacometti, Achille; Miller, Mark A; Pastore, Giorgio

    2007-12-21

    We consider a fluid of hard spheres bearing one or two uniform circular adhesive patches, distributed so as not to overlap. Two spheres interact via a "sticky" Baxter potential if the line joining the centers of the two spheres intersects a patch on each sphere, and via a hard sphere potential otherwise. We analyze the location of the fluid-fluid transition and of the percolation line as a function of the size of the patch (the fractional coverage of the sphere's surface) and of the number of patches within a virial expansion up to third order and within the first two terms (C0 and C1) of a class of closures Cn hinging on a density expansion of the direct correlation function. We find that the locations of the two lines depend sensitively on both the total adhesive coverage and its distribution. The treatment is almost fully analytical within the chosen approximate theory. We test our findings by means of specialized Monte Carlo simulations and find the main qualitative features of the critical behavior to be well captured in spite of the low density perturbative nature of the closure. The introduction of anisotropic attractions into a model suspension of spherical particles is a first step toward a more realistic description of globular proteins in solution.

  13. Simulation study for Mobile Ad hoc Networks Using DMAC Protocol

    Directory of Open Access Journals (Sweden)

    Vikas Sejwar

    2012-01-01

    Full Text Available This paper addresses the issue of deafness problem in Mobile Ad Hoc Networks (MANETs using directional antennas. Directional antennas arebeneficial for wireless ad hoc networks consisting of a collection of wireless hosts. A suitable Medium Access Control (MAC protocol must be designed to best utilize directional antennas. Deafness is caused whentwo nodes are in ongoing transmission and a third node (Deaf Node wants to communicate with one of that node. But it get no response because transmission of two nodes are in process. Though directional antennas offer better spatial reuse, but this problem can have a serious impact on network performance. A New DMAC (Directional Medium Access Control protocol uses flags in DNAV (Directional Network Allocation Vector tables to maintain information regarding the transmissionbetween the nodes in the network and their neighbor’s location. Two performance matrices have been used to show the impact of New DMAC algorithm on Deafness problem using simulator. These are RTS Failure Ratio and RTS Retransmission due to timeout

  14. STUDY ON TRANSPORTATION NUMERICAL SIMULATION OF COALBED METHANE RESERVOIR

    Institute of Scientific and Technical Information of China (English)

    Ren Dong-mei; Zhang Lie-hui; Zhu Shui-qiao

    2003-01-01

    Coalbed methane is an unconventional gas resource and its special storage and migration laws need a series of evaluations and predictions. By analyzing the flowing characteristics of coalbed methane reservoir and using the known results for the dynamic prediction of natural gas reservoir, a three-dimensional mathematical model for the two-phase flow in coalbed methane reservoir was established. In this model the Langmuir isothermal adsorption law, the first Fick law and the second Fick law were applied to consider the absorption and diffusion of coalbed methane. The governing equations were discretized in a finite-difference form, and a full-implicit simulator (CBM-GW3D) for three-dimensional two-phase flow was developed. The field data of coalbed methane wells located at Liupanshui, Guizhou was used to verify the reliability of this model. This paper also presented the result of the sensitivity analysis for some factors. And this result proved the reliability and validity of this model.

  15. Simulation Study of Swarm Intelligence Based on Life Evolution Behavior

    Directory of Open Access Journals (Sweden)

    Yanmin Liu

    2015-01-01

    Full Text Available Swarm intelligence (SI is a new evolutionary computation technology, and its performance efficacy is usually affected by each individual behavior in the swarm. According to the genetic and sociological theory, the life evolution behavior process is influenced by the external and internal factors, so the mechanisms of external and internal environment change must be analyzed and explored. Therefore, in this paper, we used the thought of the famous American genetic biologist Morgan, “life = DNA + environment + interaction of environment + gene,” to propose the mutation and crossover operation of DNA fragments by the environmental change to improve the performance efficiency of intelligence algorithms. Additionally, PSO is a random swarm intelligence algorithm with the genetic and sociological property, so we embed the improved mutation and crossover operation to particle swarm optimization (PSO and designed DNA-PSO algorithm to optimize single and multiobjective optimization problems. Simulation experiments in single and multiobjective optimization problems show that the proposed strategies can effectively improve the performance of swarm intelligence.

  16. Simulation Studies on A Cross Flow Plate Fin Heat Exchanger

    Directory of Open Access Journals (Sweden)

    M. Thirumarimurugan

    2008-01-01

    Full Text Available Compact heat exchangers which were initially developed for the aerospace industries in the1940s have been considerably improved in the past few years. The main reasons for the goodperformance of compact heat exchangers are their special design which includes turbulent which inturn use high heat transfer coefficient and resists fouling, and maximum temperature driving forcebetween the hot and cold fluids. Numerous types use special enhancement techniques to achieve therequired heat transfer in smaller plot areas and, in many cases, less initial investment. One such type ofcompact heat exchanger is the Plate-fin heat exchanger. The complexity of compact heat exchangerdesign equations results from the exchangers unique ability to transfer heat between multiple processstreams and a wide array of possible flow configurations. This paper presents the performanceevaluation of cross flow plate fin heat exchanger with several different Gas-Liquid systems.Experimental results such as exchanger effectiveness, overall heat transfer coefficients were calculatedfor the flow systems of Cross flow Heat Exchangers. A steady state model for the outlet temperature ofboth the cold and hot fluid and overall heat transfer coefficient of a plate-fin cross flow heat exchangerwas developed and simulated using MATLAB, which was verified with the experiments conducted.

  17. A Simulation Study of Solving Material Substitution Problem

    Directory of Open Access Journals (Sweden)

    Yu-Hsin Lin

    2013-01-01

    Full Text Available The material substitution problem is a critical decision issue in the assembly industry. In practice, this problem is usually solved with managers’ experiences. However, the management objectives of material substitution are various and sometimes there are conflicts between different departments. Therefore, it needs a comprehensive analysis to assess the effectiveness of adopting substitution material under different management objectives. This research uses simulation model to analyze the effectiveness of material substitution policy which includes external substitution, internal substitution and general use of material. Full factorial experimental design was applied to find the performance of proposed material substitution policy, and order quantity, purchase lead-time, due-date variance, order arrival interval, and delay cost were chosen as independent variables. The average flow time, order delay time, order fulfillment rate, and system cost were chosen as dependent variables. Experimental results showed that material substitution policies are significant on all dependent variables. Especially the external substitution policy performed better than the others in the observed four performance indices. Through external substitution policy can improve order fulfillment rate and reduce average flow time. That is, applying external substitution policy can make a great improvement in customer satisfaction which is the most impact factor in satisfying customers under the mass customization environment.

  18. A case study on fractal simulation of forest fire spread

    Institute of Scientific and Technical Information of China (English)

    朱启疆; 戎太宗; 孙睿

    2000-01-01

    This paper relates to the semi-empirical model based on fire field energy balance and the physical model based on land temperature, aiming to provide a practical way of describing fire spread. Fire spread is determined by the characteristics of combustible materials and the agency of meteorological factors and terrains. Combustible materials, such as surface area, have no featured scale, yet the process of forest fire spread contains the self-replicating feature, both of which contribute to the self-similarity of fire spread. Consequently, fire behavior can be described by fractal geometry. In this research, we select Wuchagou forest in Da Hinggan Mountains as the experimental site where a forest fire took place three years ago. The forest fire was detected on low-resolution NOAA-AVHRR images, and fire spread was simulated on high-resolution TM images as another attempt to merge information. Based on remote sensing and GIS, we adopted the method of limited spreading lumping (DLA) to describe growing phe

  19. Simulation study of acoustic wave propagation in ocean

    Digital Repository Service at National Institute of Oceanography (India)

    Mohite-Patil, T.B.; Saran, A.K.; Sawant, S.R.; Chile, R.H.; Mohite-Patil, T.T.

    . SIMULATION MODEL s o u n d s p e e d s b y d i f f . m e t h o d s s i m o u t s s p T o W o r k s p a ce 1 s i m o u t s s p e r r T o W o r k s p a ce 1483 S S P M C E R R M C E R R G R E R R C O P E R R C H E N E R R F R G R S S P M C S S P G R... S S P C O P S S P C H E N O B S S P E E D S S P G R F R T S SS D P s s pm c Errm c s s pgr Errgr s s pc op Errc op s s pc hen Errc hen s s pgrf r Errf rgr M a i n s o u n d s p e e d m o d e l [ m D ] F r o m W o r k s p a ce 2 [ m S ] F r o m W o...

  20. Reservoir simulation and geochemical study of Cerro Prieto I wells

    Energy Technology Data Exchange (ETDEWEB)

    Lippmann, M.J. (Lawrence Berkeley Lab., CA (USA)); Truesdell, A.H. (Geological Survey, Menlo Park, CA (USA))

    1990-03-01

    Combined reservoir simulation and geochemical data analysis are used to investigate the effects of recharge and other reservoir processes occurring in the western part of the Cerro Prieto, Mexico, geothermal field (i.e., Cerro Prieto I area). Enthalpy-based temperatures and bottomhole temperatures are calculated based on simplified models of the system, considering different reservoir boundary conditions and zones of contrasting initial temperatures and reservoir properties. By matching the computed trends with geothermometer-based temperature and enthalpy histories of producing wells, the main processes active in the western area of Cerro Prieto are identified. This part of the geothermal system is strongly influenced by nearby groundwater aquifers; cooler waters readily recharge the reservoirs. In response to exploitation, the natural influx of cold water into the shallower alpha reservoir is mainly from the west and down Fault L, while the recharge to the deeper beta reservoir in this part of the field, seems to be only lateral, from the west and possibly south. 11 refs., 12 figs.

  1. Learning support assessment study of a computer simulation for the development of microbial identification strategies.

    Science.gov (United States)

    Johnson, T E; Gedney, C

    2001-05-01

    This paper describes a study that examined how microbiology students construct knowledge of bacterial identification while using a computer simulation. The purpose of this study was to understand how the simulation affects the cognitive processing of students during thinking, problem solving, and learning about bacterial identification and to determine how the simulation facilitates the learning of a domain-specific problem-solving strategy. As part of an upper-division microbiology course, five students participated in several simulation assignments. The data were collected using think-aloud protocol and video action logs as the students used the simulation. The analysis revealed two major themes that determined the performance of the students: Simulation Usage-how the students used the software features and Problem-Solving Strategy Development-the strategy level students started with and the skill level they achieved when they completed their use of the simulation. SEVERAL CONCLUSIONS EMERGED FROM THE ANALYSIS OF THE DATA: (i) The simulation affects various aspects of cognitive processing by creating an environment that makes it possible to practice the application of a problem-solving strategy. The simulation was used as an environment that allowed students to practice the cognitive skills required to solve an unknown. (ii) Identibacter (the computer simulation) may be considered to be a cognitive tool to facilitate the learning of a bacterial identification problem-solving strategy. (iii) The simulation characteristics did support student learning of a problem-solving strategy. (iv) Students demonstrated problem-solving strategy development specific to bacterial identification. (v) Participants demonstrated an improved performance from their repeated use of the simulation.

  2. Learning Support Assessment Study of a Computer Simulation for the Development of Microbial Identification Strategies

    Directory of Open Access Journals (Sweden)

    Tristan E. Johnson

    2009-12-01

    Full Text Available This paper describes a study that examined how microbiology students construct knowledge of bacterial identification while using a computer simulation. The purpose of this study was to understand how the simulation affects the cognitive processing of students during thinking, problem solving, and learning about bacterial identification and to determine how the simulation facilitates the learning of a domain-specific problem-solving strategy. As part of an upper-division microbiology course, five students participated in several simulation assignments. The data were collected using think-aloud protocol and video action logs as the students used the simulation. The analysis revealed two major themes that determined the performance of the students: Simulation Usage—how the students used the software features and Problem-Solving Strategy Development—the strategy level students started with and the skill level they achieved when they completed their use of the simulation. Several conclusions emerged from the analysis of the data: (i The simulation affects various aspects of cognitive processing by creating an environment that makes it possible to practice the application of a problem-solving strategy. The simulation was used as an environment that allowed students to practice the cognitive skills required to solve an unknown. (ii Identibacter (the computer simulation may be considered to be a cognitive tool to facilitate the learning of a bacterial identification problem-solving strategy. (iii The simulation characteristics did support student learning of a problem-solving strategy. (iv Students demonstrated problem-solving strategy development specific to bacterial identification. (v Participants demonstrated an improved performance from their repeated use of the simulation.

  3. Assessment of SPM in perfusion brain SPECT studies. A numerical simulation study using bootstrap resampling methods.

    Science.gov (United States)

    Pareto, Deborah; Aguiar, Pablo; Pavía, Javier; Gispert, Juan Domingo; Cot, Albert; Falcón, Carles; Benabarre, Antoni; Lomeña, Francisco; Vieta, Eduard; Ros, Domènec

    2008-07-01

    Statistical parametric mapping (SPM) has become the technique of choice to statistically evaluate positron emission tomography (PET), functional magnetic resonance imaging (fMRI), and single photon emission computed tomography (SPECT) functional brain studies. Nevertheless, only a few methodological studies have been carried out to assess the performance of SPM in SPECT. The aim of this paper was to study the performance of SPM in detecting changes in regional cerebral blood flow (rCBF) in hypo- and hyperperfused areas in brain SPECT studies. The paper seeks to determine the relationship between the group size and the rCBF changes, and the influence of the correction for degradations. The assessment was carried out using simulated brain SPECT studies. Projections were obtained with Monte Carlo techniques, and a fan-beam collimator was considered in the simulation process. Reconstruction was performed by using the ordered subsets expectation maximization (OSEM) algorithm with and without compensation for attenuation, scattering, and spatial variant collimator response. Significance probability maps were obtained with SPM2 by using a one-tailed two-sample t-test. A bootstrap resampling approach was used to determine the sample size for SPM to detect the between-group differences. Our findings show that the correction for degradations results in a diminution of the sample size, which is more significant for small regions and low-activation factors. Differences in sample size were found between hypo- and hyperperfusion. These differences were larger for small regions and low-activation factors, and when no corrections were included in the reconstruction algorithm.

  4. Exporting simulation technology to the Philippines: a comparative study of traditional versus simulation methods for teaching intravenous cannulation.

    Science.gov (United States)

    Sotto, Juan Alejandro R; Ayuste, Eduardo C; Bowyer, Mark W; Almonte, Josefina R; Dofitas, Rodney B; Lapitan, Marie C M; Pimentel, Elisabeth A; Ritter, E Matthew; Wherry, David C

    2009-01-01

    This study examines effectiveness of a donated Laerdal Virtual I.V. simulator when compared with traditional methods of teaching intravenous (IV) cannulation to third year medical students in the Philippines. Forty novice Filipino medical students viewed an instructional video on how to start intravenous lines and were then randomly divided into two groups of twenty. The "Traditional" group observed an IV insertion on an actual patient performed by an experienced practitioner, and then subsequently performed an IV on an actual patient which was videotaped. The "Simulation" group practiced the Virtual I.V. simulator until they successfully completed level three using the "doctor" setting. These students then performed an IV on an actual patient which was videotaped. The videotapes for both groups were reviewed by two pre-trained (Inter-rater reliability of > or =0.84) observers who were blinded to the group using a previously validated checklist for IV insertion. Students trained on the Virtual I.V. showed significantly greater success in successfully starting an IV on an actual patient (40% VS. 15%, p<0.05), decreased constrictive band time (p<.05), increased raw score on the check list (p<.03), and decreased overall time to start an IV (p<.05). The technology was well received but wider application in the non western world is limited by lack of in country company support and the relative expense.

  5. A 3-d simulation of the atmospheric neutrinos

    CERN Document Server

    Favier, Jean; Vialle, J P

    2003-01-01

    The first AMS flight in June 1998 on board of the space shuttle Discovery at an altitude of approximately 380 km unveiled unexpected features of the cosmic rays spectra below the Earth geomagnetic cut-off. In addition to a secondary flux of particles at all latitude, a ring of high energy particles (up to 6 GeV) and an anomalous ratio e+/e- as high as 4 was observed near the geomagnetic equator. This paper describes a simulation of the interaction of primary cosmic rays with atmosphere in which the effect of the Earth magnetic field is included . Using the GEANT3 package for the tracking of particles with the GFLUKA associated package for the physics of interactions, this simulation reproduces quite well the AMS experimental results and the CAPRICE muon data at ground level. The predictions of this model for the flux of atmospheric neutrino are compared with the Super-Kamiokande results and with the results of other atmospheric neutrino models.

  6. The Architecture of MEG Simulation and Analysis Software

    CERN Document Server

    Cattaneo, PaoloW; Sawada, Ryu; Schneebeli, Matthias; Yamada, Shuei

    2011-01-01

    MEG (Mu to Electron Gamma) is an experiment dedicated to search for the $\\mu^+ \\rightarrow e^+\\gamma$ decay that is strongly suppressed in the Standard Model but predicted in several Super Symmetric extensions of it at an accessible rate. MEG is a small-size experiment ($\\approx 50-60$ physicists at any time) with a life span of about 10 years. The limited human resource available, in particular in the core offline group, emphasized the importance of reusing software and exploiting existing expertise. Great care has been devoted to provide a simple system that hides implementation details to the average programmer. That allowed many members of the collaboration to contribute to the development of the software of the experiment with limited programming skill. The offline software is based on two frameworks: {\\bf REM} in FORTRAN 77 used for the event generation and detector simulation package {\\bf GEM}, based on GEANT 3, and {\\bf ROME} in C++ used in the readout simulation {\\bf Bartender} and in the reconstruct...

  7. Assisted Sonication vs Conventional Transesterification Numerical Simulation and Sensitivity Study

    Science.gov (United States)

    Janajreh, Isam; Noorul Hussain, Mohammed; El Samad, Tala

    2015-10-01

    Transeterification is known as slow reaction that can take over several hours to complete as the two immiscible liquid reactants combine to form biodiesel and the less favorable glycerol. The quest of finding the perfect catalyst, optimal operational conditions, and reactor configuration to accelerate the reaction in mere few minutes that ensures high quality biodiesel, in economically viable way is coming along with sonication. This drastic reduction is a key enabler for the development of a continuous processing that otherwise is fairly costly and low throughput using conventional method. The reaction kinetics of sonication assisted as inferred by several authors is several time faster and this work implements these rates in a high fidelity numerical simulation model. This flow model is based on Navier-Stokes equations coupled with energy equation for non-isothermal flow and the transport equations of the multiple reactive species. The model is initially validated against experimental data from previous work of the authors using an annular reactor configuration. Following the validation, comparison of the reaction rate is shown to gain more insight to the distribution of the reaction and its attained rates. The two models (conventional and sonication) then compared on the basis of their sensitivity to the methane to oil molar ratio as the most pronounced process parameter. Both the exit reactor yield and the distribution of the species are evaluated with favorable yield under sonication process. These results pave the way to build a more robust process intensified reactor having an integrated selective heterogeneous catalyst to steer the reaction. This can avoid the downstream cleaning processes, cutting reaction time, and render economic benefit to the process.

  8. New media simulation stories in nursing education: a quasi-experimental study exploring learning outcomes.

    Science.gov (United States)

    Webb-Corbett, Robin; Schwartz, Melissa Renee; Green, Bob; Sessoms, Andrea; Swanson, Melvin

    2013-04-01

    New media simulation stories are short multimedia presentations that combine simulation, digital technology, and story branching to depict a variety of healthcare-related scenarios. The purpose of this study was to explore whether learning outcomes were enhanced if students viewed the results of both correct and incorrect nursing actions demonstrated through new media simulation stories. A convenience sample of 109 undergraduate nursing students in a family-centered maternity course participated in the study. Study findings suggests that students who viewed both correct and incorrect depictions of maternity nursing actions scored better on tests than did those students who viewed only correct nursing actions.

  9. Learning nursing through simulation: A case study approach towards an expansive model of learning.

    Science.gov (United States)

    Berragan, Liz

    2014-08-01

    This study explores the impact of simulation upon learning for undergraduate nursing students. The study objectives were (a) to explore the experiences of participating in simulation education for a small group of student nurses; and (b) to explore learning through simulation from the perspectives of the nursing students, the nurse educators and the nurse mentors. Conducted as a small-scale narrative case study, it tells the unique stories of a small number of undergraduate nursing students, nurse mentors and nurse educators and explores their experiences of learning through simulation. Data analysis through progressive focusing revealed that the nurse educators viewed simulation as a means of helping students to learn to be nurses, whilst, the nurse mentors suggested that simulation helped them to determine nursing potential. The students' narratives showed that they approached simulation learning in different ways resulting in a range of outcomes: those who were successfully becoming nurses, those who were struggling or working hard to become nurses and those who were not becoming nurses. Theories of professional practice learning and activity theory present an opportunity to articulate and theorise the learning inherent in simulation activities. They recognise the links between learning and the environment of work and highlight the possibilities for learning to inspire change and innovation.

  10. Assessment of Simulated Ground Motions in Earthquake Engineering Practice: A Case Study for Duzce (Turkey)

    Science.gov (United States)

    Karimzadeh, Shaghayegh; Askan, Aysegul; Yakut, Ahmet

    2017-07-01

    Simulated ground motions can be used in structural and earthquake engineering practice as an alternative to or to augment the real ground motion data sets. Common engineering applications of simulated motions are linear and nonlinear time history analyses of building structures, where full acceleration records are necessary. Before using simulated ground motions in such applications, it is important to assess those in terms of their frequency and amplitude content as well as their match with the corresponding real records. In this study, a framework is outlined for assessment of simulated ground motions in terms of their use in structural engineering. Misfit criteria are determined for both ground motion parameters and structural response by comparing the simulated values against the corresponding real values. For this purpose, as a case study, the 12 November 1999 Duzce earthquake is simulated using stochastic finite-fault methodology. Simulated records are employed for time history analyses of frame models of typical residential buildings. Next, the relationships between ground motion misfits and structural response misfits are studied. Results show that the seismological misfits around the fundamental period of selected buildings determine the accuracy of the simulated responses in terms of their agreement with the observed responses.

  11. Simulation and Test Study on Very Fast Transient Overvoltage in 1000kV GIS Substation

    Science.gov (United States)

    Han, Bin; Lin, Jiming; Ban, Liangeng; Wang, Hao; Li, Zhibing; Xiang, Zutao

    2017-05-01

    Disconnector switching in gas insulated switchgear (GIS) generates very fast transient overvoltage (VFTO). VFTO may damage the insulation of GIS equipment. This paper studies the VFTO of a 1000kV GIS substation. The simulation models are obtained according to the configuration of GIS. Operation modes of disconnector were summarized. The characteristics of VFTO were obtained. During the system commissioning test of the substation, VFTO were measured during disconnector switching. Comparison was made between the test and simulation results. The simulation results were in agreement with the test results. The accuracy of the simulation model is verified. Simulation and test study shows that it is safe to do switching operation of disconnector in this GIS substation without damping resistor.

  12. Dose and sequence of simulation and direct care experiences among beginning nursing students: a pilot study.

    Science.gov (United States)

    Schlairet, Maura C; Fenster, Mark J

    2012-12-01

    Accumulating suggests human patient simulation is an effective instructional technique. Simulated clinical experiences may be a reasonable substitute for direct care experiences. Educators and regulators need to know what mix of simulation and direct care promotes learning and how these experiences can be designed to help nursing students achieve essential outcomes. The goal of this pilot study was to identify a model to promote development of clinical judgment among beginning nursing students. Principles related to types of learning and practice (blocked by type or interleaved) were used in exploring simulation and direct care design schema. Using a 50% interleaved simulation design schema, robust clinical judgment scores and positive perceptions of learning were identified among beginning students participating in a basic nursing concepts and skills course. Further study is warranted to determine whether this schema is effective in other nursing courses or with novice-level students from diverse health care disciplines. Copyright 2012, SLACK Incorporated.

  13. Opinion Leaders' Role in Innovation Diffusion : A Simulation Study

    NARCIS (Netherlands)

    van Eck, P.S.; Leeflang, P.S.H.; Jager, W.

    2011-01-01

    This study investigates the critical role that opinion leaders (or influentials) play in the adoption process of new products. Recent existing reseach evidence indicates a limited effect of opinion leaders on diffusion processes, yet these studies take into account merely the network position of opi

  14. A Tower Model for Lightning Overvoltage Studies Based on the Result of an FDTD Simulation

    Science.gov (United States)

    Noda, Taku

    This paper describes a method for deriving a transmission tower model for EMTP lightning overvoltage studies from a numerical electromagnetic simulation result obtained by the FDTD (Finite Difference Time Domain) method. The FDTD simulation carried out in this paper takes into account the following items which have been ignored or over-simplified in previously-presented simulations: (i) resistivity of the ground soil; (ii) arms, major slant elements, and foundations of the tower; (iii) development speed of the lightning return stroke. For validation purpose a pulse test of a 500-kV transmission tower is simulated, and a comparison with the measured result shows that the present FDTD simulation gives a sufficiently accurate result. Using this validated FDTD-based simulation method the insulator-string voltages of a tower for a lightning stroke are calculated, and based on the simulation result the parameter values of the proposed tower model for EMTP studies are determined in a systematic way. Since previously-presented models include trial-and-error process in the parameter determination, it can be said that the proposed model is more general in this regard. As an illustrative example, the 500-kV transmission tower mentioned above is modeled, and it is shown that the derived model closely reproduces the FDTD simulation result.

  15. Simulation Study of Flap Effects on a Commercial Transport Airplane in Upset Conditions

    Science.gov (United States)

    Cunningham, Kevin; Foster, John V.; Shah, Gautam H.; Stewart, Eric C.; Ventura, Robin N.; Rivers, Robert A.; Wilborn, James E.; Gato, William

    2005-01-01

    As part of NASA's Aviation Safety and Security Program, a simulation study of a twinjet transport airplane crew training simulation was conducted to address fidelity for upset or loss of control conditions and to study the effect of flap configuration in those regimes. Piloted and desktop simulations were used to compare the baseline crew training simulation model with an enhanced aerodynamic model that was developed for high-angle-of-attack conditions. These studies were conducted with various flap configurations and addressed the approach-to-stall, stall, and post-stall flight regimes. The enhanced simulation model showed that flap configuration had a significant effect on the character of departures that occurred during post-stall flight. Preliminary comparisons with flight test data indicate that the enhanced model is a significant improvement over the baseline. Some of the unrepresentative characteristics that are predicted by the baseline crew training simulation for flight in the post-stall regime have been identified. This paper presents preliminary results of this simulation study and discusses key issues regarding predicted flight dynamics characteristics during extreme upset and loss-of-control flight conditions with different flap configurations.

  16. STUDY AND NUMERICAL SIMULATION OF SOLAR SYSTEM FOR AIR HEATING

    Directory of Open Access Journals (Sweden)

    M. Ghodbane

    2016-01-01

    Full Text Available The use of solar energy in sunny countries, is an effective outil for compensate the lack in the energy, their benefits are not related only to its economic benefits but especially for the environmental protection, so we must find solutions to the problems of pollution. This work is a theoretical study of a solar flat plate collector ; air is used as the heat transfer fluid. In this study, we established in first step the calculation of solar radiation in various sites in Algeria (Adrar, El Oued, Bechar, Biskra and Tamanrasset. The second step is the parameters influence study of the sites and climate on the performance of our collector. The results obtained are encouraging for the use of this type in the heating in the winter, also it can be used in different kinds of drying.

  17. PERFORMANCE STUDIES OF INTEGRATED FUZZY LOGIC CONTROLLER FOR BRUSHLESS DC MOTOR DRIVES USING ADVANCED SIMULATION MODEL

    National Research Council Canada - National Science Library

    C, Subba Rami Reddy; M, Surya Kalavathi

    2011-01-01

    This paper introduces an Integrated fuzzy logic controller (IFLC) for brushless dc (BLDC) motor drives using advanced simulation model and presents a comparative study of performances of PID controller and IFLC...

  18. Study on Collision Between Two Ships Using Selected Parameters in Collision Simulation

    Institute of Scientific and Technical Information of China (English)

    Dong-Myung Bae; Aditya Rio Prabowo; Bo Cao; Ahmad Fauzan Zakki; Gunawan Dwi Haryadi

    2016-01-01

    In the present analysis, several parameters used in a numerical simulation are investigated in an integrated study to obtain their influence on the process and results of this simulation. The parameters studied are element formulation, friction coefficient, and material model. Numerical simulations using the non-linear finite element method are conducted to produce virtual experimental data for several collision scenarios. Pattern and size damages caused by collision in a real accident case are assumed as real experimental data, and these are used to validate the method. The element model study performed indicates that the Belytschko-Tsay element formulation should be recommended for use in virtual experiments. It is recommended that the real value of the friction coefficient for materials involved is applied in simulations. For the study of the material model, the application of materials with high yield strength is recommended for use in the side hull structure.

  19. Simulations to study the static polarization limit for RHIC lattice with the Polymorphic Tracking Code

    CERN Document Server

    Duan, Zhe

    2015-01-01

    We report a study of spin dynamics based on simulations with the Polymorphic Tracking Code (PTC), exploring the dependence of the static polarization limit on various beam parameters and lattice settings for a practical RHIC lattice.

  20. Development of an autofluorescent probe for brain cancer: simulations and phantom studies

    Science.gov (United States)

    Leh, B.; Charon, Y.; Duval, M.-A.; Jean, F.; Lefebvre, F.; Menard, L.; Vu Thi, M. H.; Siebert, R.

    2009-07-01

    Autofluorescence spectroscopy from brain tissue may help to discriminate cancerous from healthy tissue. The characteristics of our probe are studied on phantoms and confronted to Monte Carlo simulations. Geometrical origins of fluorescence light are evaluated.

  1. Study on optimization of agent initial positions in land combat simulation

    Institute of Scientific and Technical Information of China (English)

    WU Chunguo; LIANG Yanchun; LEE Heow Pueh; LU Chun; YANG Xiaowei

    2004-01-01

    The use of computational-intelligence-based techniques in the optimization of agent initial positions in land combat simulations is studied. A novel method for the reduction of support vectors in the support vector machine (SVM) is presented. The optimization on the width of the Gaussian kernel function and the combination of the SVM with the radial basis function neural network are performed in the proposed method. Simulation results show that the proposed method can improve the running efficiency drastically compared with that using the traditional SVM with the same precision. We also summarize and present some experiences and trends in the study on the optimization problem in land combat simulation.

  2. A Concept Of Modification And Simulation Studies Of A Mechatronic Stair Transporter For The Disabled

    Directory of Open Access Journals (Sweden)

    Wudarczyk Sławomir

    2015-12-01

    Full Text Available A numerical model of existing stair climber with its passenger was built and its operation was analysed through simulations. A modification of the stair climber has been developed on a basis of the simulation studies. The modification depends on equipping the device with additional controllable mechanism the function of which is to change the position of the passenger’s centre of gravity. Comparative simulation studies were carried out for the standard version and the modified version of the stair transporter in a system for the dynamic.

  3. A RAINFALL SIMULATOR STUDY OF INFILTRATION INTO ARABLE SOILS

    NARCIS (Netherlands)

    WIERDA, A; VEEN, AWL

    1992-01-01

    Since Hortonian surface runoff is one possible mechanism for the fast transport of agricultural chemicals from arable soils to surface water, more information is needed on its significance in agricultural areas. The present study concerns the sandy soils of the Dutch Cover Sands area, and is based o

  4. Numerical Modeling and Combustion Studies of Scram Jet Simulation

    Science.gov (United States)

    2014-12-01

    2 ˆ̄ρ| ˆ̃S|2. (3.37) Similar to the above treatment , since this relation corresponds to three (diagonal components of stress matrix) equations, an...towards the study of more complicated flame structures. The mass stoichiometric ratio defined as [42] ( YO YF ) st = ν ′ OMO ν ′ FMF = s (5.33) and the

  5. preliminary multidomain modelling and simulation study of a ...

    African Journals Online (AJOL)

    user

    Renewable energy sources have gained much attention due to the recent energy crisis and ... system for the most energy capture for this case study to be a rotor speed of 5.5rad/s at a height of 10m. .... Thesis, Faculty of California Polytechnic.

  6. Study of readout and cross-talks for multi-strip RPC with PSpice simulation

    Institute of Scientific and Technical Information of China (English)

    WANG Ya-Ping; HE Xiao-Chun; CAI Xu

    2008-01-01

    An electrical model for multi-strip resistive plate chamber (RPC) is presented,and a comparison between simulation results and test data is carried on.Based on the model,the influences of the RPC's design parameters on the readout are studied with PSpice simulation.Cross-talk (CT) phenomenon is observed and the relative amplitudes of the CT are studied for different design parameters.

  7. High fidelity studies of exploding foil initiator bridges, Part 3: ALEGRA MHD simulations

    Science.gov (United States)

    Neal, William; Garasi, Christopher

    2017-01-01

    Simulations of high voltage detonators, such as Exploding Bridgewire (EBW) and Exploding Foil Initiators (EFI), have historically been simple, often empirical, one-dimensional models capable of predicting parameters such as current, voltage, and in the case of EFIs, flyer velocity. Experimental methods have correspondingly generally been limited to the same parameters. With the advent of complex, first principles magnetohydrodynamic codes such as ALEGRA and ALE-MHD, it is now possible to simulate these components in three dimensions, and predict a much greater range of parameters than before. A significant improvement in experimental capability was therefore required to ensure these simulations could be adequately verified. In this third paper of a three part study, the experimental results presented in part 2 are compared against 3-dimensional MHD simulations. This improved experimental capability, along with advanced simulations, offer an opportunity to gain a greater understanding of the processes behind the functioning of EBW and EFI detonators.

  8. Numerical Study of Aerodynamic Characteristics of a Symmetric NACA Section with Simulated Ice Shapes

    Science.gov (United States)

    Tabatabaei, N.; Cervantes, M. J.; Trivedi, C.; Aidanpää, Jan-Olof

    2016-09-01

    To develop a numerical model of icing on wind turbine blades, a CFD simulation was conducted to investigate the effect of critical ice accretions on the aerodynamic characteristics of a 0.610 m chord NACA 0011 airfoil section. Aerodynamic performance coefficients and pressure profile were calculated and compared with the available measurements for a chord Reynolds number of 1.83x106. Ice shapes were simulated with flat plates (spoiler-ice) extending along the span of the wing. Lift, drag, and pressure coefficients were calculated in zero angle of attack through the steady state and transient simulations. Different approaches of numerical studies have been applied to investigate the icing conditions on the blades. The simulated separated flow over the sharp spoilers is challenging and can be seen as a worst test case for validation. It allows determining a reliable strategy to simulate real ice shapes [1] for which the detailed validation cannot easily be provided.

  9. The Power of Phase I Studies to Detect Clinical Relevant QTc Prolongation: A Resampling Simulation Study

    Directory of Open Access Journals (Sweden)

    Georg Ferber

    2015-01-01

    Full Text Available Concentration-effect (CE models applied to early clinical QT data from healthy subjects are described in the latest E14 Q&A document as promising analysis to characterise QTc prolongation. The challenges faced if one attempts to replace a TQT study by thorough ECG assessments in Phase I based on CE models are the assurance to obtain sufficient power and the establishment of a substitute for the positive control to show assay sensitivity providing protection against false negatives. To demonstrate that CE models in small studies can reliably predict the absence of an effect on QTc, we investigated the role of some key design features in the power of the analysis. Specifically, the form of the CE model, inclusion of subjects on placebo, and sparse sampling on the performance and power of this analysis were investigated. In this study, the simulations conducted by subsampling subjects from 3 different TQT studies showed that CE model with a treatment effect can be used to exclude small QTc effects. The number of placebo subjects was also shown to increase the power to detect an inactive drug preventing false positives while an effect can be underestimated if time points around tmax are missed.

  10. Parametric study and simulation of microbubble column flotation

    OpenAIRE

    1991-01-01

    A study based on a statistically designed set of experiments (Box-Behnken design) has been conducted to determine the optimum conditions for advanced physical fine coal cleaning using microbubble column flotation. The dependent variables in these experiments were mass yield and product quality (ash, sulfur and btu), while the independent variables were feed solids content, collector dosage, frother dosage, feed rate, aeration rate, and wash water rate. The most important operating parameters ...

  11. Simulation and performance study of the ceramic THGEM

    OpenAIRE

    Yan, Jia-qing; Xie, Yu-Guang; Hu, Tao; Lu, Jun-Guang; Zhou, Li; Qu, Guo-Pu; Cai, Xiao; Niu, Shun-Li; Chen, Hai-tao

    2014-01-01

    The THGEMs based on ceramic substrate were developed successfully for neutron and single photon detection. The influences on thermal neutron scattering and the internal radioactivity of both ceramic and FR-4 substrates were studied and compared. The ceramic THGEMs are homemade of 200 um hole diameter, 600 um pitch, 200 um thickness, 80 um rim, and 50 mm*50 mm sensitive area. The FR-4 THGEMs with the same geometry were used for the reference. The gas gain, energy resolution and gain stability ...

  12. Quality of resuscitation: flight attendants in an airplane simulator use a new mechanical resuscitation device--a randomized simulation study.

    Science.gov (United States)

    Fischer, Henrik; Neuhold, Stephanie; Hochbrugger, Eva; Steinlechner, Barbara; Koinig, Herbert; Milosevic, Ljubisa; Havel, Christof; Frantal, Sophie; Greif, Robert

    2011-04-01

    Cardiopulmonary resuscitation (CPR) during flight is challenging and has to be sustained for long periods. In this setting a mechanical-resuscitation-device (MRD) might improve performance. In this study we compared the quality of resuscitation of trained flight attendants practicing either standard basic life support (BLS) or using a MRD in a cabin-simulator. Prospective, open, randomized and crossover simulation study. Study participants, competent in standard BLS were trained to use the MRD to deliver both chest compressions and ventilation. 39 teams of two rescuers resuscitated a manikin for 12 min in random order, standard BLS or mechanically assisted resuscitation. Primary outcome was "absolute hands-off time" (sum of all periods during which no hand was placed on the chest minus ventilation time). Various parameters describing the quality of chest compression and ventilation were analysed as secondary outcome parameters. Use of the MRD led to significantly less "absolute hands-off time" (164±33 s vs. 205±42 s, p<0.001). The quality of chest compression was comparable among groups, except for a higher compression rate in the standard BLS group (123±14 min(-1) vs. 95±11 min(-1), p<0.001). Tidal volume was higher in the standard BLS group (0.48±0.14 l vs. 0.34±0.13 l, p<0.001), but we registered fewer gastric inflations in the MRD group (0.4±0.3% vs. 16.6±16.9%, p<0.001). Using the MRD resulted in significantly less "absolute hands-off time", but less effective ventilation. The translation of higher chest compression rate into better outcome, as shown in other studies previously, has to be investigated in another human outcome study. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

  13. A hybrid simulation approach for integrating safety behavior into construction planning: An earthmoving case study.

    Science.gov (United States)

    Goh, Yang Miang; Askar Ali, Mohamed Jawad

    2016-08-01

    One of the key challenges in improving construction safety and health is the management of safety behavior. From a system point of view, workers work unsafely due to system level issues such as poor safety culture, excessive production pressure, inadequate allocation of resources and time and lack of training. These systemic issues should be eradicated or minimized during planning. However, there is a lack of detailed planning tools to help managers assess the impact of their upstream decisions on worker safety behavior. Even though simulation had been used in construction planning, the review conducted in this study showed that construction safety management research had not been exploiting the potential of simulation techniques. Thus, a hybrid simulation framework is proposed to facilitate integration of safety management considerations into construction activity simulation. The hybrid framework consists of discrete event simulation (DES) as the core, but heterogeneous, interactive and intelligent (able to make decisions) agents replace traditional entities and resources. In addition, some of the cognitive processes and physiological aspects of agents are captured using system dynamics (SD) approach. The combination of DES, agent-based simulation (ABS) and SD allows a more "natural" representation of the complex dynamics in construction activities. The proposed hybrid framework was demonstrated using a hypothetical case study. In addition, due to the lack of application of factorial experiment approach in safety management simulation, the case study demonstrated sensitivity analysis and factorial experiment to guide future research.

  14. Temperature dependence of creep compliance of highly cross-linked epoxy: A molecular simulation study

    Energy Technology Data Exchange (ETDEWEB)

    Khabaz, Fardin, E-mail: rajesh.khare@ttu.edu; Khare, Ketan S., E-mail: rajesh.khare@ttu.edu; Khare, Rajesh, E-mail: rajesh.khare@ttu.edu [Department of Chemical Engineering, Texas Tech University, Lubbock, TX 79409 (United States)

    2014-05-15

    We have used molecular dynamics (MD) simulations to study the effect of temperature on the creep compliance of neat cross-linked epoxy. Experimental studies of mechanical behavior of cross-linked epoxy in literature commonly report creep compliance values, whereas molecular simulations of these systems have primarily focused on the Young’s modulus. In this work, in order to obtain a more direct comparison between experiments and simulations, atomistically detailed models of the cross-linked epoxy are used to study their creep compliance as a function of temperature using MD simulations. The creep tests are performed by applying a constant tensile stress and monitoring the resulting strain in the system. Our results show that simulated values of creep compliance increase with an increase in both time and temperature. We believe that such calculations of the creep compliance, along with the use of time temperature superposition, hold great promise in connecting the molecular insight obtained from molecular simulation at small length- and time-scales with the experimental behavior of such materials. To the best of our knowledge, this work is the first reported effort that investigates the creep compliance behavior of cross-linked epoxy using MD simulations.

  15. Monte Carlo simulation of the Varian Clinac 600C accelerator using dynamic wedges; Simulacao Monte Carlo do acelerador Varian Clinac 600C utilizando cunhas dinamicas

    Energy Technology Data Exchange (ETDEWEB)

    Moreno, S. [Universidade da Beira Interior (UBI), Covilha (Portugal); Chaves, A.; Lopes, M.C. [Instituto Portugues de Oncologia Doutor Francisco Gentil (IPO), Coimbra (Portugal); Peralta, L. [Laboratorio de Instrumentacao e Fisica Experimental de Particulas (LIP), Lisboa (Portugal)]|[Universidade de Lisboa (Portugal). Faculdade de Ciencias

    2004-07-01

    C linac. For such, the influence of the virtual wedge on a 4 MV photon beam, produced by the Varian Clinac 600C linac, was studied using the MC codes GEANT3 and DPM. A good agreement was obtained between the experimental and simulated data in the dose lateral profiles at 1 cm depth and using a 10 X 10 cm{sup 2} field size. (author)

  16. Simulation studies of premixed ch4/air Microcombustion

    Directory of Open Access Journals (Sweden)

    P.Bala Murali

    2014-04-01

    Full Text Available A numerical study of CH4-air premixed combustion in the micro combustors with a five step global mechanism is performed by solving the two dimensional governing equations of continuity, momentum and species, coupled with the energy equation. A reference case is defined as the combustion in a cylindrical tube with 1 mm inlet diameter and length 10 times its inlet diameter with a uniform velocity profile at the inlet plane. Different physical and boundary conditions have been applied in order to investigate their respective effects on the flame temperature. The conditions studied in the current paper include the combustor size, geometry and inlet velocities. Downscaling the combustion chamber and higher velocities leaded to reduction in residence time which results in lower combustion efficiency causing insufficient heat generation unable to maintain the self-sustained combustion. The effect of variation in inlet velocity has role in the determining the flame position in combination with given thermal conditions. The results of this paper indicate that these various boundary and physical conditions have effects on the flame temperature to different extent and should be carefully monitored when applied for different applications.

  17. Simulation Study on Flat-Bottom Structure Slamming

    Institute of Scientific and Technical Information of China (English)

    CHEN Zhen; XIAO Xi; WANG De-yu

    2005-01-01

    A study is performed about the water entry of a flat-bottom structure by use of the FE software MSC Dytran. The aim of the study is to find out the effect of the air cushion and structural mass on the impact peak pressure and the role of splash in the course of water entry. Some FE models are built up and some cases including the flat-bottom structure with different masses impacting water at some constant or initial velocities are calculated. The calculation shows that air plays an important role in the course of water entry of a flat-bottom structure and the compression of the air captured by the flat-bottom structure produces the first peak pressure. And the mass of the structure has a great effect on the peak value of impact pressure. The structure with different masses will produce different impact pressures even at the same impact velocity. Splash will occur a long time after the impact pressure reaches the peak value. A formula is given for the calculation of the peak value of impact pressure in this paper.

  18. A Study of Eddy Viscosity Coefficient in Numerical Tidal Simulation

    Institute of Scientific and Technical Information of China (English)

    陈永平; 雷智益

    2001-01-01

    Based on the fluid motion equations, the physical meaning of eddy viscosity coefficient and the rationality of theBoussinesq hypothesis are discussed in this paper. The effect of the coefficient on numerical stability is analyzed briefly.A semi-enclosed rectangular sea area, with an orthogonal spur dike, is applied in a 2-D numerical model to study the effect of horizontal eddy viscosity coefficient (AH). The computed result shows that AH has little influence on the tidal level and averaged flow velocity, but has obvious influence on the intensity and the range of return flow around near thespur dike. Correspondingly, a wind-driven current pool and an annular current are applied in a 3-D numerical modelrespectively to study the effect of vertical eddy viscosity coefficient (AV). The computed result shows that the absolute value of AV is inversely proportional to that of horizontal velocity, and the vertical gradient value of AV determines the ver-tical distribution of horizontal velocity. The distribution form of AV is theoretically recommended as a parabolic type, ofwhich the maximum value appears at 0.5 H.

  19. Simulation studies of direct-current microdischarges for electric propulsion

    Science.gov (United States)

    Deconinck, Thomas Dominique

    The structure of direct-current microdischarges is investigated using a detailed two-dimensional multi-species continuum model. Microdischarges are direct-current discharges that operate at a relatively high pressure of about 100 Torr and geometric dimensions in the 10-100 micrometer range. Our motivation for the study of microdischarges comes from a potential application of these devices in microthrusters for small satellite propulsion. The Micro Plasma Thruster (MPT) concept consists of a direct-current microdischarge in a geometry comprising a constant area flow section followed by a diverging exit nozzle. A detailed description of the plasma dynamics inside the MPT including power deposition, ionization, coupling of the plasma phenomena with high-speed flow, and propulsion system performance is reported in this study. A two-dimensional model is developed as part of this study. The model consists of a plasma module coupled to a flow module and is solved on a hybrid unstructured mesh framework. The plasma module provides a self-consistent, multi-species, multi-temperature description of the microdischarge phenomena while the flow module provides a description of the low Reynolds number compressible flow through the system. The plasma module solves conservation equations for plasma species continuity and electron energy, and Poisson's equation for the self-consistent electric field. The flow module solves mass, bulk gas momentum and energy equations. The coupling of energy from the electrostatic field to the plasma species is modeled by the Joule heating term which appears in the electron and heavy species energy equations. Discretization of the Joule heating term on unstructured meshes requires special attention. We propose a new robust method for the numerical discretization of the Joule heating term on such meshes using a cell-centered, finite volume approach. A prototypical microhollow cathode discharge (MHCD) is studied to guide and validate the modeling

  20. Operating room clinicians' ratings of workload: a vignette simulation study.

    Science.gov (United States)

    Wallston, Kenneth A; Slagle, Jason M; Speroff, Ted; Nwosu, Sam; Crimin, Kimberly; Feurer, Irene D; Boettcher, Brent; Weinger, Matthew B

    2014-06-01

    Increased clinician workload is associated with medical errors and patient harm. The Quality and Workload Assessment Tool (QWAT) measures anticipated (pre-case) and perceived (post-case) clinical workload during actual surgical procedures using ratings of individual and team case difficulty from every operating room (OR) team member. The purpose of this study was to examine the QWAT ratings of OR clinicians who were not present in the OR but who read vignettes compiled from actual case documentation to assess interrater reliability and agreement with ratings made by clinicians involved in the actual cases. Thirty-six OR clinicians (13 anesthesia providers, 11 surgeons, and 12 nurses) used the QWAT to rate 6 cases varying from easy to moderately difficult based on actual ratings made by clinicians involved with the cases. Cases were presented and rated in random order. Before rating anticipated individual and team difficulty, the raters read prepared clinical vignettes containing case synopses and much of the same written case information that was available to the actual clinicians before the onset of each case. Then, before rating perceived individual and team difficulty, they read part 2 of the vignette consisting of detailed role-specific intraoperative data regarding the anesthetic and surgical course, unusual events, and other relevant contextual factors. Surgeons had higher interrater reliability on the QWAT than did OR nurses or anesthesia providers. For the anticipated individual and team workload ratings, there were no statistically significant differences between the actual ratings and the ratings obtained from the vignettes. There were differences for the 3 provider types in perceived individual workload for the median difficulty cases and in the perceived team workload for the median and more difficult cases. The case difficulty items on the QWAT seem to be sufficiently reliable and valid to be used in other studies of anticipated and perceived clinical

  1. Optical and Hygroscopic Studies of Aerosols In Simulated Planetary Atmospheres

    Science.gov (United States)

    Hasenkopf, Christa A.

    2011-08-01

    Basic characteristics of the early Earth climate, the only known environment in the Universe in which life has been known to emerge and thrive, remain a mystery. In particular, little is understood about the Earth's atmosphere 2.8 billion years ago. From climate models and laboratory studies, it is postulated that an organic haze, much like that found on Saturn's largest moon Titan, covered the early Earth. This haze, generated from photolysis of carbon dioxide (CO2) and methane (CH4), may have had profound climatic consequences. Climate models of the early Earth that include this haze have had to rely upon optical properties of a Titan laboratory analog. Titan haze, though thought to be similar, is formed from a different combination of precursor gases and by different energy sources than early Earth haze. This thesis examines the direct and indirect radiative effects of aerosol on early Earth climate by studying the optical and hygroscopic properties of a laboratory analog. A Titan analog is studied for comparison and to better understand spacecraft-retrieved haze chemical and optical properties from Titan. The properties of the laboratory analogs, generated in a flowing reactor cell with a continuum ultraviolet (UV) light source, were primarily measured using cavity ringdown aerosol extinction spectroscopy and UV-visible (UV-Vis) transmission spectroscopy. We find that the optical properties of our early Earth analog are significantly different than those of the Titan analog from Khare et al. (1984). In both the UV and visible, when modeled as fractals, particles with the optical properties of the early Earth analog have approximately 30% larger extinction efficiencies than particles with Khare et al. (1984) values. This result implies our early Earth haze analog would provide a more efficient UV shield and have a stronger antigreenhouse effect than the Khare et al. (1984) Titan analog. Our Titan analog has significantly smaller imaginary refractive index values

  2. SIMMEON-Prep study: SIMulation of Medication Errors in ONcology: prevention of antineoplastic preparation errors.

    Science.gov (United States)

    Sarfati, L; Ranchon, F; Vantard, N; Schwiertz, V; Gauthier, N; He, S; Kiouris, E; Gourc-Berthod, C; Guédat, M G; Alloux, C; Gustin, M-P; You, B; Trillet-Lenoir, V; Freyer, G; Rioufol, C

    2015-02-01

    Medication errors (ME) in oncology are known to cause serious iatrogenic complications. However, MEs still occur at each step in the anticancer chemotherapy process, particularly when injections are prepared in the hospital pharmacy. This study assessed whether a ME simulation program would help prevent ME-associated iatrogenic complications. The 5-month prospective study, consisting of three phases, was undertaken in the centralized pharmaceutical unit of a university hospital of Lyon, France. During the first simulation phase, 25 instruction sheets each containing one simulated error were inserted among various instruction sheets issued to blinded technicians. The second phase consisted of activity aimed at raising pharmacy technicians' awareness of risk of medication errors associated with antineoplastic drugs. The third phase consisted of re-enacting the error simulation process 3 months after the awareness campaign. The rate and severity of undetected medication errors were measured during the two simulation (first and third) phases. The potential seriousness of the ME was assessed using the NCC MERP(®) index. The rate of undetected medication errors decreased from 12 in the first simulation phase (48%) to five in the second simulation phase (20%, P = 0.04). The number of potential deaths due to administration of a faulty preparation decreased from three to zero. Awareness of iatrogenic risk through error simulation allowed pharmacy technicians to improve their ability to identify errors. This study is the first demonstration of the successful application of a simulation-based learning tool for reducing errors in the preparation of injectable anticancer drugs. Such a program should form part of the continuous quality improvement of risk management strategies for cancer patients. © 2014 John Wiley & Sons Ltd.

  3. ATLAS Pixel-Optoboard Production and Simulation Studies

    CERN Document Server

    Nderitu, Simon

    At CERN, a Large collider will collide protons at high energies. There are four experiments being built to study the particle properties from the collision. The ATLAS experiment is the largest. It has many sub detectors among which is the Pixel detector which is the innermost part. The Pixel detector has eighty million channels that have to be read out. An optical link is utilized for the read out. It has optical to electronic interfaces both on the detector and off the detector at the counting room. The component on the detector in called the opto-board. This work discusses the production testing of the opto-boards to be installed on the detector. A total of 300 opto-boards including spares have been produced. The production was done in three laboratories among which is the laboratory at the University of Wuppertal which had the responsibility of Post production testing of all the one third of the total opto-boards. The results are discussed in this work. The analysis of the results from the total productio...

  4. OPTIMIZATION OF A SOLAR SIMULATOR FOR PLANETARY-PHOTOCHEMICAL STUDIES

    Energy Technology Data Exchange (ETDEWEB)

    Es-sebbar, Et-touhami; Bénilan, Yves; Fray, Nicolas; Cottin, Hervé; Jolly, Antoine; Gazeau, Marie-Claire, E-mail: ettouhamiessbbar@gmail.com [Laboratoire Interuniversitaire des Systèmes Atmosphériques, LISA, UMR 7583, CNRS, Université Paris Est Créteil and Université Paris Diderot, Institute Pierre Simon Laplace, 61 Avenue du Général De Gaulle, F-94010 Créteil Cedex (France)

    2015-06-22

    Low-temperature microwave-powered plasma based on hydrogen and hydrogen with noble gas mixtures are widely used as a continuous vacuum ultraviolet (VUV) source in laboratory experiments carried out to mimic the photochemistry in astrophysical environments. In this work, we present a study dedicated to optimizing such sources in terms of mono-chromaticity at Lyα (H(Lyα) line at 121.6 nm ∼ 10.2 eV) and high spectral irradiance. We report the influence on the emission spectrum of a wide range of experimental conditions including gas composition (pure H{sub 2}, pure He, and H{sub 2}/He mixture), gas pressure, flow rates, and microwave power. The absolute spectral irradiance delivered by this VUV light source has been measured. With a microwave input power of 100 W, the best conditions for producing a quasi-monochromatic source are a 1% H{sub 2}/He gas mixture at a total pressure of 5 mbar and a flow rate of 2 sccm. By changing the microwave input power from 30 to 120 W, H(Lyα) increases by more than one order of magnitude. A comparison between the current measurements and the solar VUV spectral irradiance is reported over 115–170 nm.

  5. Experimental Studies of NAK in a Simulated Space Environment

    Science.gov (United States)

    Gibson, M. A.; Sanzi, J.; Ljubanovic, D.

    Space fission power systems are being developed at the National Aeronautics and Space Administration (NASA) and Department of Energy (DOE) with a short term goal of building a full scale, non-nuclear, Technology Demonstration Unit (TDU) test at NASA's Glenn Research Center. Due to the geometric constraints, mass restrictions, and fairly high tempera- tures associated with space reactors, liquid metals are typically used as the primary coolant. A eutectic mixture of sodium (22 percent) and potassium (78 percent), or NaK, has been chosen as the coolant for the TDU with a total system capacity of approximately 55L. NaK, like all alkali metals, is very reactive, and warrants certain safety considerations. To adequately examine the risk associated with the personnel, facility, and test hardware during a potential NaK leak in the large scale TDU test, a small scale experiment was performed in which NaK was released in a thermal vacuum chamber under controlled conditions. The study focused on detecting NaK leaks in the vacuum environment as well as the molecular flow of the NaK vapor. This paper reflects the work completed during the NaK experiment and provides results and discussion relative to the findings.

  6. Computerized adaptive measurement of depression: A simulation study

    Directory of Open Access Journals (Sweden)

    Mammen Oommen

    2004-05-01

    Full Text Available Abstract Background Efficient, accurate instruments for measuring depression are increasingly important in clinical practice. We developed a computerized adaptive version of the Beck Depression Inventory (BDI. We examined its efficiency and its usefulness in identifying Major Depressive Episodes (MDE and in measuring depression severity. Methods Subjects were 744 participants in research studies in which each subject completed both the BDI and the SCID. In addition, 285 patients completed the Hamilton Depression Rating Scale. Results The adaptive BDI had an AUC as an indicator of a SCID diagnosis of MDE of 88%, equivalent to the full BDI. The adaptive BDI asked fewer questions than the full BDI (5.6 versus 21 items. The adaptive latent depression score correlated r = .92 with the BDI total score and the latent depression score correlated more highly with the Hamilton (r = .74 than the BDI total score did (r = .70. Conclusions Adaptive testing for depression may provide greatly increased efficiency without loss of accuracy in identifying MDE or in measuring depression severity.

  7. Optimization of a Solar Simulator for Planetary-photochemical Studies

    Science.gov (United States)

    Es-sebbar, Et-touhami; Bénilan, Yves; Fray, Nicolas; Cottin, Hervé; Jolly, Antoine; Gazeau, Marie-Claire

    2015-06-01

    Low-temperature microwave-powered plasma based on hydrogen and hydrogen with noble gas mixtures are widely used as a continuous vacuum ultraviolet (VUV) source in laboratory experiments carried out to mimic the photochemistry in astrophysical environments. In this work, we present a study dedicated to optimizing such sources in terms of mono-chromaticity at Lyα (H(Lyα) line at 121.6 nm ˜ 10.2 eV) and high spectral irradiance. We report the influence on the emission spectrum of a wide range of experimental conditions including gas composition (pure H2, pure He, and H2/He mixture), gas pressure, flow rates, and microwave power. The absolute spectral irradiance delivered by this VUV light source has been measured. With a microwave input power of 100 W, the best conditions for producing a quasi-monochromatic source are a 1% H2/He gas mixture at a total pressure of 5 mbar and a flow rate of 2 sccm. By changing the microwave input power from 30 to 120 W, H(Lyα) increases by more than one order of magnitude. A comparison between the current measurements and the solar VUV spectral irradiance is reported over 115-170 nm.

  8. CO2 capture using aqueous ammonia: kinetic study and process simulation

    DEFF Research Database (Denmark)

    Darde, Victor Camille Alfred; van Well, Willy J.M.; Stenby, Erling Halfdan

    2011-01-01

    Carbon dioxide capture using aqueous ammonia is a post-combustion technology that has shown a good potential. Therefore this process is studied by measuring the rate of absorption of carbon dioxide by aqueous ammonia and by performing process simulation. The rate of absorption of carbon dioxide...... to 0.6. The results were compared with those found for 30 wt% mono-ethanolamine (MEA) solutions.The capture process was simulated successfully using the simulator Aspen Plus coupled with the extended UNIQUAC thermodynamic model available for the NH3–CO2–H2O system. For this purpose, a user model...

  9. Modeling and simulation of queuing system for customer service improvement: A case study

    Science.gov (United States)

    Xian, Tan Chai; Hong, Chai Weng; Hawari, Nurul Nazihah

    2016-10-01

    This study aims to develop a queuing model at UniMall by using discrete event simulation approach in analyzing the service performance that affects customer satisfaction. The performance measures that considered in this model are such as the average time in system, the total number of student served, the number of student in waiting queue, the waiting time in queue as well as the maximum length of buffer. ARENA simulation software is used to develop a simulation model and the output is analyzed. Based on the analysis of output, it is recommended that management of UniMall consider introducing shifts and adding another payment counter in the morning.

  10. Eighteenth Workshop on Recent Developments in Computer Simulation Studies in Condensed Matter Physics

    CERN Document Server

    Landau, David P; Schüttler, Heinz-Bernd; Computer Simulation Studies in Condensed-Matter Physics XVIII

    2006-01-01

    This volume represents a "status report" emanating from presentations made during the 18th Annual Workshop on Computer Simulations Studies in Condensed Matter Physics at the Center for Simulational Physics at the University of Georgia in March 2005. It provides a broad overview of the most recent advances in the field, spanning the range from statistical physics to soft condensed matter and biological systems. Results on nanostructures and materials are included as are several descriptions of advances in quantum simulations and quantum computing as well as.methodological advances.

  11. SIMULATION STUDY OF BLACKHOLE ATTACK IN THE MOBILE AD HOC NETWORKS

    Directory of Open Access Journals (Sweden)

    SHEENU SHARMA

    2009-06-01

    Full Text Available A wireless ad hoc network is a temporary network set up by wireless nodes usually moving randomly and communicating without a network infrastructure. Due to security vulnerabilities of the routing protocols, however, wireless ad hoc networks may be unprotected against attacks by the malicious nodes. In this study we investigated the effects of Blackhole attacks on the network performance. We simulated Blackhole attacks in Qualnet Simulator and measured the packet loss in the network with and without a blackhole. The simulation is done on AODV (Ad hoc On Demand Distance Vector Routing Protocol. The network performance in the presence of a blackhole is reduced up to 26%.

  12. Pilot Study: Impact of Computer Simulation on Students' Economic Policy Performance. Pilot Study.

    Science.gov (United States)

    Domazlicky, Bruce; France, Judith

    Fiscal and monetary policies taught in macroeconomic principles courses are concepts that might require both lecture and simulation methods. The simulation models, which apply the principles gleened from comparative statistics to a dynamic world, may give students an appreciation for the problems facing policy makers. This paper is a report of a…

  13. Construction and tests of the Atlas barrel pre sampler and study of the photon/pion rejection in the electromagnetic calorimeter; Realisation du pre-echantillonneur central d'ATLAS et etude de la separation {gamma}/{pi}{sup 0} dans le calorimetre electromagnetique

    Energy Technology Data Exchange (ETDEWEB)

    Saboumazrag, S

    2004-02-01

    ATLAS is one of the detectors which will equip the future proton-proton collider LHC at CERN. The main motivation for the ATLAS experiment is the quest for the Higgs boson. The observation of this particle would be an important step in the understanding of particle physics in the context of the standard model, with or without supersymmetry. This thesis aims to present the construction of the barrel pre-sampler which will equip the front face of the ATLAS electromagnetic calorimeter. The construction and tests of sectors were achieved at the Laboratory of Subatomic Physics and Cosmology of Grenoble. Two of these sectors were mounted on one module of the electromagnetic calorimeter and tested with electron, photon and muon beams at CERN. I participated in these tests and analysed the data. The results were compared to a Monte-Carlo simulation GEANT3. One of the difficulties lies in the necessity to discard photons coming from {pi}{sup 0} {yields} {gamma}{gamma} events because they can be mistaken for photons released in gamma channels of Higgs boson decay. In the mass range spreading from 95 MeV to 150 MeV, H{sup 0} {yields} {gamma}{gamma} is the most adequate process to detect the Higgs boson. A study of the discard parameter {gamma}/{pi}{sup 0} has been performed. For a photon detection efficiency of 90%, the average discard parameter has been assessed to be 2.5 which is slightly lower than the value given by the simulation.

  14. Simulation study of unmanned aerial vehicle communication networks addressing bandwidth disruptions

    Science.gov (United States)

    Wei, Sixiao; Ge, Linqiang; Yu, Wei; Chen, Genshe; Pham, Khanh; Blasch, Erik; Shen, Dan; Lu, Chao

    2014-06-01

    To date, Unmanned Aerial Vehicles (UAVs) have been widely used for numerous applications. UAVs can directly connect to ground stations or satellites to transfer data. Multiple UAVs can communicate and cooperate with each other and then construct an ad-hoc network. Multi-UAV systems have the potential to provide reliable and timely services for end users in addition to satellite networks. In this paper, we conduct a simulation study for evaluating the network performance of multi-UAV systems and satellite networks using the ns-2 networking simulation tool. Our simulation results show that UAV communication networks can achieve better network performance than satellite networks and with a lower cost and increased timeliness. We also investigate security resiliency of UAV networks. As a case study, we simulate false data injection attacks against UAV communication networks in ns-2 and demonstrate the impact of false data injection attacks on network performance.

  15. PEPT: An invaluable tool for 3-D particle tracking and CFD simulation verification in hydrocyclone studies

    Directory of Open Access Journals (Sweden)

    Hoffmann Alex C.

    2013-05-01

    Full Text Available Particle tracks in a hydrocyclone generated both experimentally by positron emission particle tracking (PEPT and numerically with Eulerian-Lagranian CFD have been studied and compared. A hydrocyclone with a cylinder-on-cone design was used in this study, the geometries used in the CFD simulations and in the experiments being identical. It is shown that it is possible to track a fast-moving particle in a hydrocyclone using PEPT with high temporal and spatial resolutions. The numerical 3-D particle trajectories were generated using the Large Eddy Simulation (LES turbulence model for the fluid and Lagrangian particle tracking for the particles. The behaviors of the particles were analyzed in detail and were found to be consistent between experiments and CFD simulations. The tracks of the particles are discussed and related to the fluid flow field visualized in the CFD simulations using the cross-sectional static pressure distribution.

  16. EM Simulations in Beam Coupling Impedance Studies: Some Examples of Application

    CERN Document Server

    Zannini, C

    2012-01-01

    In the frame of the SPS upgrade an accurate impedance model is needed in order to predict the instability threshold and if necessary to start a campaign of impedance reduction. Analytical models, 3-D simulations and bench measurements are used to estimate the impedance contribution of the different devices along the machine. Special attention is devoted to the estimation of the impedance contribution of the kicker magnets that are suspected to be the most important impedance source in SPS. In particular a numerical study is carried out to analyze the effect of the serigraphy in the SPS extraction kicker. An important part of the devices simulations are the ferrite model. For this reason a numerical based method to measure the electromagnetic properties of the material has been developed to measure the ferrite properties. A simulation technique, in order to account for external cable is developed. The simulation results were benchmarked with analytical models and observations with beam. A numerical study was a...

  17. A study of the use of simulated work task situations in interactive information retrieval evaluations

    DEFF Research Database (Denmark)

    Borlund, Pia

    2016-01-01

    Purpose – The purpose of this paper is to report a study of how the test instrument of a simulated work task situation is used in empirical evaluations of interactive information retrieval (IIR) and reported in the research literature. In particular, the author is interested to learn whether...... the requirements of how to employ simulated work task situations are followed, and whether these requirements call for further highlighting and refinement. Design/methodology/approach – In order to study how simulated work task situations are used, the research literature in question is identified. This is done...... partly via citation analysis by use of Web of Science®, and partly by systematic search of online repositories. On this basis, 67 individual publications were identified and they constitute the sample of analysis. Findings – The analysis reveals a need for clarifications of how to use simulated work task...

  18. Guidance law simulation studies for complex approaches using the Microwave Landing System (MLS)

    Science.gov (United States)

    Feather, J. B.

    1986-01-01

    This report documents results for MLS guidance algorithm development conducted by DAC for NASA under the Advance Transport Operating Systems (ATOPS) Technology Studies program (NAS1-18028). The study consisted of evaluating guidance laws for vertical and lateral path control, as well as speed control, by simulating an MLS approach for the Washington National Airport. This work is an extension and generalization of a previous ATOPS contract (NAS1-16202) completed by DAC in 1985. The Washington river approach was simulated by six waypoints and one glideslope change and consisted of an eleven nautical mile approach path. Tracking performance was generated for 10 cases representing several different conditions, which included MLS noise, steady wind, turbulence, and windshear. Results of this simulation phase are suitable for use in future fixed-base simulator evaluations employing actual hardware (autopilot and a performance management system), as well as crew procedures and information requirements for MLS.

  19. A study of mesoscale simulations for planar shock experiments on heterogeneous granular materials

    Science.gov (United States)

    Schumaker, Merit G.

    There is an interest in producing accurate and reliable computer simulations to predict the dynamic behavior of heterogeneous materials and to use these simulations to gain further insight into experimental results. In so doing, a more complete understanding of the multiple-length scales involved in heterogeneous material compaction can be obtained. Mesoscale computer simulations of dynamically shocked materials have proven to be a beneficial resource in unraveling data not observed in planar shock impact experiments, such as stress and temperature interactions between grains. The modeled mono-dispersed geometry of particles, the densities of each material, equations of state, material properties and many other factors affect the simulated outcomes. By studying and analyzing these variables, many of which highlight the difference between experimental and simulated results, there manifests additional insight into the shock dynamics of the different heterogeneous granular materials. The heterogeneous materials in this study were created both by a "shake and pack" method, where individual grains were randomly seeded into the computational domain and grown until the grains matched the experimental volume fraction and average diameter. Three planar shock experiments were utilized to validate simulation models and parameters: 1. Brake pad powder compaction at Marquette University, 2. Dry sand experiments at Georgia Tech, and 3. Release of dry sand at Cambridge University. Planar shock impact experiments were simulated using two different hydrocode packages: CTH and iSALE. Validated models are then used to setup future dry, water, and possible ice saturated sand release experiments. Particle velocity and stress traces obtained from the computer simulations were compared to VISAR, PDV, and Manganin gage measurements obtained from experiments. The results from simulations are compared to experiments and discussed in this document.

  20. Study of Structural Properties in Complex Fluids by Addition of Surfactants Using DPD Simulation

    CERN Document Server

    Mayoral, Estela; Martínez-Magadán, José Manuel; Ortega, Alejandro; Soto, Ismael

    2014-01-01

    In this work we study the tertiary structure of ionic surfactants when the pH in the system is modified using electrostatic dissipative particle dynamics simulations (DPD). The dependence with pH and kind of surfactant is presented. Our simulations reproduce the experimental behavior reported in the literature. The scaling for the radius of gyration with the size of the molecule as a function of pH is also obtained.

  1. Impact of Simulation and Clinical Experience on Self-efficacy in Nursing Students: Intervention Study.

    Science.gov (United States)

    Kimhi, Einat; Reishtein, Judith L; Cohen, Miri; Friger, Michael; Hurvitz, Nancy; Avraham, Rinat

    2016-01-01

    This study compared the effect of simulation and clinical experience timing on self-confidence/self-efficacy for the nursing process. Using a randomized, double-crossover design, self-efficacy was measured 3 times. Although self-efficacy was significantly higher at time 1 for students who had clinical experience, there was no difference between the groups at the end of the course (time 2). Thus, simulation increased self-confidence/self-efficacy equivalently if placed either before or after clinical experience.

  2. The Use of Instructional Simulations to Support Classroom Teaching: A Crisis Communication Case Study

    Science.gov (United States)

    Shifflet, Mark; Brown, Jane

    2006-01-01

    The purpose of this study was to investigate how exposure to classroom instruction affected the use of a computer simulation that was designed to provide students an opportunity to apply material presented in class. The study involved an analysis of a computer-based crisis communication case study designed for a college-level public relations…

  3. Simulation of fruit pallet movement in the port of Durban: A case study

    CSIR Research Space (South Africa)

    Van Dyk, FE

    2005-04-01

    Full Text Available This paper gives an overview of a discrete-event simulation study that was performed on pallet movement at Fresh Produce Terminals in the port of Durban, South Africa. The study formed part of an extended study of the logistics infrastructure...

  4. Study and Simulation of Critical Factors Affecting Final Quality in Electromagnetically Hemmed Automotive Aluminum

    Science.gov (United States)

    Jimbert, P.; Eguia, I.; Daehn, G. S.; Iriondo, E.; Gutierrez, M. A.; Hurtado, I.

    2013-06-01

    A previous study on electromagnetic forming (EM) hemming technology carried out in TECNALIA showed the real capability of this high speed deformation method to produce quality hemmed parts (Jimbert et al., J. Mater. Process. Technol. 211:916-924, 2011). Continuing with the development of this promising new application for the EM technology, some new experiments were run. The objective of this study is to focus on the critical processing factors that affect the final quality of the electromagnetically hemmed parts. For this purpose, an experimental plan was designed changing different input parameters and output quality parameters measured to quantify the results. The flange height limit was obtained for the studied experimental setup and was established at 10 mm. The bending radius and the gap between the inner and the outer part have to be keep to the minimum to increase final quality. In parallel to the physical experiments, EM hemming simulations were carried out using an EM loose coupling simulation method. An EM hemming process simulation of a circular whole part was carried out using shell elements. Results were compared with cross section simulations of the hemmed union using solid elements in order to analyze the importance of the type of element used for EM hemming simulation. Simulations revealed that solid elements reproduce quality aspects better than shell elements.

  5. Comparison of Bayesian and Classical Analysis of Weibull Regression Model: A Simulation Study

    Directory of Open Access Journals (Sweden)

    İmran KURT ÖMÜRLÜ

    2011-01-01

    Full Text Available Objective: The purpose of this study was to compare performances of classical Weibull Regression Model (WRM and Bayesian-WRM under varying conditions using Monte Carlo simulations. Material and Methods: It was simulated the generated data by running for each of classical WRM and Bayesian-WRM under varying informative priors and sample sizes using our simulation algorithm. In simulation studies, n=50, 100 and 250 were for sample sizes, and informative prior values using a normal prior distribution with was selected for b1. For each situation, 1000 simulations were performed. Results: Bayesian-WRM with proper informative prior showed a good performance with too little bias. It was found out that bias of Bayesian-WRM increased while priors were becoming distant from reliability in all sample sizes. Furthermore, Bayesian-WRM obtained predictions with more little standard error than the classical WRM in both of small and big samples in the light of proper priors. Conclusion: In this simulation study, Bayesian-WRM showed better performance than classical method, when subjective data analysis performed by considering of expert opinions and historical knowledge about parameters. Consequently, Bayesian-WRM should be preferred in existence of reliable informative priors, in the contrast cases, classical WRM should be preferred.

  6. Post-processing of Monte Carlo simulations for rapid BNCT source optimization studies

    Energy Technology Data Exchange (ETDEWEB)

    Bleuel, D.L.; Chu, W.T.; Donahue, R.J.; Ludewigt, B.A.; Vujic, J.

    2000-10-01

    A great advantage of some neutron sources, such as accelerator-produced sources, is that they can be tuned to produce different spectra. Unfortunately, optimization studies are often time-consuming and difficult, as they require a lengthy Monte Carlo simulation for each source. When multiple characteristics, such as energy, angle, and spatial distribution of a neutron beam are allowed to vary, an overwhelming number of simulations may be required. Many optimization studies, therefore, suffer from a small number of datapoints, restrictive treatment conditions, or poor statistics. By scoring pertinent information from every particle tally in a Monte Carlo simulation, then applying appropriate source variable weight factors in a post-processing algorithm, a single simulation can be used to model any number of multiple sources. Through this method, the response to a new source can be modeled in minutes or seconds, rather than hours or days, allowing for the analysis of truly variable source conditions of much greater resolution than is normally possible when a new simulation must be run for each datapoint in a study. This method has been benchmarked and used to recreate optimization studies in a small fraction of the time spent in the original studies.

  7. MixSim : An R Package for Simulating Data to Study Performance of Clustering Algorithms

    Directory of Open Access Journals (Sweden)

    Volodymyr Melnykov

    2012-11-01

    Full Text Available The R package MixSim is a new tool that allows simulating mixtures of Gaussian distributions with different levels of overlap between mixture components. Pairwise overlap, defined as a sum of two misclassification probabilities, measures the degree of interaction between components and can be readily employed to control the clustering complexity of datasets simulated from mixtures. These datasets can then be used for systematic performance investigation of clustering and finite mixture modeling algorithms. Among other capabilities of MixSim, there are computing the exact overlap for Gaussian mixtures, simulating Gaussian and non-Gaussian data, simulating outliers and noise variables, calculating various measures of agreement between two partitionings, and constructing parallel distribution plots for the graphical display of finite mixture models. All features of the package are illustrated in great detail. The utility of the package is highlighted through a small comparison study of several popular clustering algorithms.

  8. Simulated Waste for Leaching and Filtration Studies--Laboratory Preparation Procedure

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Harry D.; Russell, Renee L.; Peterson, Reid A.

    2009-10-27

    This report discusses the simulant preparation procedure for producing multi-component simulants for leaching and filtration studies, including development and comparison activities in accordance with the test plan( ) prepared and approved in response to the Test Specification 24590-WTP-TSP-RT-06-006, Rev 0 (Smith 2006). A fundamental premise is that this approach would allow blending of the different components to simulate a wide variety of feeds to be treated in the Hanford Tank Waste Treatment and Immobilization Plant (WTP). For example, a given feed from the planned feed vector could be selected, and the appropriate components would then be blended to achieve a representation of that particular feed. Using the blending of component simulants allows the representation of a much broader spectrum of potential feeds to the Pretreatment Engineering Platform (PEP).

  9. NV Energy Large-Scale Photovoltaic Integration Study: Intra-Hour Dispatch and AGC Simulation

    Energy Technology Data Exchange (ETDEWEB)

    Lu, Shuai; Etingov, Pavel V.; Meng, Da; Guo, Xinxin; Jin, Chunlian; Samaan, Nader A.

    2013-01-02

    The uncertainty and variability with photovoltaic (PV) generation make it very challenging to balance power system generation and load, especially under high penetration cases. Higher reserve requirements and more cycling of conventional generators are generally anticipated for large-scale PV integration. However, whether the existing generation fleet is flexible enough to handle the variations and how well the system can maintain its control performance are difficult to predict. The goal of this project is to develop a software program that can perform intra-hour dispatch and automatic generation control (AGC) simulation, by which the balancing operations of a system can be simulated to answer the questions posed above. The simulator, named Electric System Intra-Hour Operation Simulator (ESIOS), uses the NV Energy southern system as a study case, and models the system’s generator configurations, AGC functions, and operator actions to balance system generation and load. Actual dispatch of AGC generators and control performance under various PV penetration levels can be predicted by running ESIOS. With data about the load, generation, and generator characteristics, ESIOS can perform similar simulations and assess variable generation integration impacts for other systems as well. This report describes the design of the simulator and presents the study results showing the PV impacts on NV Energy real-time operations.

  10. Simulation of fruit pallet movement in the port of Durban: A case study

    Directory of Open Access Journals (Sweden)

    JF Bekker

    2005-06-01

    Full Text Available This paper gives an overview of a discrete-event simulation study that was performed on pallet movement at Fresh Produce Terminals in the port of Durban, South Africa. The study formed part of an extended study of the logistics infrastructure of the South African fresh fruit industry and its export supply chain. The focus in this paper is on pallet movement in the terminal and its requirement on the storage capacity of the cold store facility. Specifics pertaining to input data analysis are provided, as well as a discussion of simulation model validation and output data analysis.

  11. Simulation studies for a high resolution time projection chamber at the international linear collider

    Energy Technology Data Exchange (ETDEWEB)

    Muennich, A.

    2007-03-26

    The International Linear Collider (ILC) is planned to be the next large accelerator. The ILC will be able to perform high precision measurements only possible at the clean environment of electron positron collisions. In order to reach this high accuracy, the requirements for the detector performance are challenging. Several detector concepts are currently under study. The understanding of the detector and its performance will be crucial to extract the desired physics results from the data. To optimise the detector design, simulation studies are needed. Simulation packages like GEANT4 allow to model the detector geometry and simulate the energy deposit in the different materials. However, the detector response taking into account the transportation of the produced charge to the readout devices and the effects ofthe readout electronics cannot be described in detail. These processes in the detector will change the measured position of the energy deposit relative to the point of origin. The determination of this detector response is the task of detailed simulation studies, which have to be carried out for each subdetector. A high resolution Time Projection Chamber (TPC) with gas amplification based on micro pattern gas detectors, is one of the options for the main tracking system at the ILC. In the present thesis a detailed simulation tool to study the performance of a TPC was developed. Its goal is to find the optimal settings to reach an excellent momentum and spatial resolution. After an introduction to the present status of particle physics and the ILC project with special focus on the TPC as central tracker, the simulation framework is presented. The basic simulation methods and implemented processes are introduced. Within this stand-alone simulation framework each electron produced by primary ionisation is transferred through the gas volume and amplified using Gas Electron Multipliers (GEMs). The output format of the simulation is identical to the raw data from a

  12. Studying distributed cognition of simulation-based team training with DiCoT.

    Science.gov (United States)

    Rybing, Jonas; Nilsson, Heléne; Jonson, Carl-Oscar; Bang, Magnus

    2016-03-01

    Health care organizations employ simulation-based team training (SBTT) to improve skill, communication and coordination in a broad range of critical care contexts. Quantitative approaches, such as team performance measurements, are predominantly used to measure SBTTs effectiveness. However, a practical evaluation method that examines how this approach supports cognition and teamwork is missing. We have applied Distributed Cognition for Teamwork (DiCoT), a method for analysing cognition and collaboration aspects of work settings, with the purpose of assessing the methodology's usefulness for evaluating SBTTs. In a case study, we observed and analysed four Emergo Train System® simulation exercises where medical professionals trained emergency response routines. The study suggests that DiCoT is an applicable and learnable tool for determining key distributed cognition attributes of SBTTs that are of importance for the simulation validity of training environments. Moreover, we discuss and exemplify how DiCoT supports design of SBTTs with a focus on transfer and validity characteristics. Practitioner Summary: In this study, we have evaluated a method to assess simulation-based team training environments from a cognitive ergonomics perspective. Using a case study, we analysed Distributed Cognition for Teamwork (DiCoT) by applying it to the Emergo Train System®. We conclude that DiCoT is useful for SBTT evaluation and simulator (re)design.

  13. Simulation study of intra- and intermicellar ordering in triblock-copolymer systems

    NARCIS (Netherlands)

    Wijmans, C.M.; Eiser, E.; Frenkel, D.

    2004-01-01

    We report a numerical study of the structure and phase behavior of a model for a triblock-copolymer solution. The aim of this study is to investigate the nature of the dense micellar phase that can form in such systems. The simulations were performed on a lattice model for PEO (poly(ethylene-oxide))

  14. Progress of Radioactive Waste Treatment Technology:Study on Alteration of Simulated HLW Glass under Simulated Geological Disposal Condition

    Institute of Scientific and Technical Information of China (English)

    HUA; Xiao-hui; WANG; Lei; YOU; Xin-feng; ZHENG; Wen-jun; YANG; Lin-yue; LI; Yu-song; ZHENG; Yu; LI; Teng; ZHANG; Zhen-tao

    2015-01-01

    1/200 scale simulated disposal experimental device was set up in 2013 and operated from 2014,in which ground water penetrated host rock,buffer materials,container materials and simulated HLW glass.The leaching velocity,alteration of HLW glass and corrosion of container materials were investigated.Moreover,temperature,host rock,

  15. Simulation Studies of Backgrounds for the Fermilab SeaQuest Experiment (E906)

    Science.gov (United States)

    Ma, Puyang; Aidala, Christine; E906/SeaQuest Collaboration

    2016-09-01

    The Fermilab SeaQuest experiment uses a 120 GeV proton beam on targets of liquid hydrogen, liquid deuterium, and solid nuclear targets of carbon, iron, and tungsten. The experiment measures the Drell-Yan process of quark-antiquark annihilation to produce muon pairs, with the main physics goal of studying the sea quark distributions in the nucleon and nuclei. Since quark and antiquark annihilation to dimuons is a rare process, there are significant backgrounds due to muons from the decay of pions produced in the target and beam dump. These backgrounds are being studied via simulated proton interactions in a GEANT implementation of the experimental setup. Full simulation of these backgrounds has proved to be difficult because of the extensive computer time needed. Studies to speed up the simulation process will be presented. NSF.

  16. A study on optimization of hybrid drive train using Advanced Vehicle Simulator (ADVISOR)

    Science.gov (United States)

    Same, Adam; Stipe, Alex; Grossman, David; Park, Jae Wan

    This study investigates the advantages and disadvantages of three hybrid drive train configurations: series, parallel, and "through-the-ground" parallel. Power flow simulations are conducted with the MATLAB/Simulink-based software ADVISOR. These simulations are then applied in an application for the UC Davis SAE Formula Hybrid vehicle. ADVISOR performs simulation calculations for vehicle position using a combined backward/forward method. These simulations are used to study how efficiency and agility are affected by the motor, fuel converter, and hybrid configuration. Three different vehicle models are developed to optimize the drive train of a vehicle for three stages of the SAE Formula Hybrid competition: autocross, endurance, and acceleration. Input cycles are created based on rough estimates of track geometry. The output from these ADVISOR simulations is a series of plots of velocity profile and energy storage State of Charge that provide a good estimate of how the Formula Hybrid vehicle will perform on the given course. The most noticeable discrepancy between the input cycle and the actual velocity profile of the vehicle occurs during deceleration. A weighted ranking system is developed to organize the simulation results and to determine the best drive train configuration for the Formula Hybrid vehicle. Results show that the through-the-ground parallel configuration with front-mounted motors achieves an optimal balance of efficiency, simplicity, and cost. ADVISOR is proven to be a useful tool for vehicle power train design for the SAE Formula Hybrid competition. This vehicle model based on ADVISOR simulation is applicable to various studies concerning performance and efficiency of hybrid drive trains.

  17. A study on optimization of hybrid drive train using Advanced Vehicle Simulator (ADVISOR)

    Energy Technology Data Exchange (ETDEWEB)

    Same, Adam; Stipe, Alex; Grossman, David; Park, Jae Wan [Department of Mechanical and Aeronautical Engineering, University of California, Davis, One Shields Ave, Davis, CA 95616 (United States)

    2010-10-01

    This study investigates the advantages and disadvantages of three hybrid drive train configurations: series, parallel, and ''through-the-ground'' parallel. Power flow simulations are conducted with the MATLAB/Simulink-based software ADVISOR. These simulations are then applied in an application for the UC Davis SAE Formula Hybrid vehicle. ADVISOR performs simulation calculations for vehicle position using a combined backward/forward method. These simulations are used to study how efficiency and agility are affected by the motor, fuel converter, and hybrid configuration. Three different vehicle models are developed to optimize the drive train of a vehicle for three stages of the SAE Formula Hybrid competition: autocross, endurance, and acceleration. Input cycles are created based on rough estimates of track geometry. The output from these ADVISOR simulations is a series of plots of velocity profile and energy storage State of Charge that provide a good estimate of how the Formula Hybrid vehicle will perform on the given course. The most noticeable discrepancy between the input cycle and the actual velocity profile of the vehicle occurs during deceleration. A weighted ranking system is developed to organize the simulation results and to determine the best drive train configuration for the Formula Hybrid vehicle. Results show that the through-the-ground parallel configuration with front-mounted motors achieves an optimal balance of efficiency, simplicity, and cost. ADVISOR is proven to be a useful tool for vehicle power train design for the SAE Formula Hybrid competition. This vehicle model based on ADVISOR simulation is applicable to various studies concerning performance and efficiency of hybrid drive trains. (author)

  18. Simulation-Based Approach for Studying the Balancing of Local Smart Grids with Electric Vehicle Batteries

    Directory of Open Access Journals (Sweden)

    Juhani Latvakoski

    2015-07-01

    Full Text Available Modern society is facing great challenges due to pollution and increased carbon dioxide (CO2 emissions. As part of solving these challenges, the use of renewable energy sources and electric vehicles (EVs is rapidly increasing. However, increased dynamics have triggered problems in balancing energy supply and consumption demand in the power systems. The resulting uncertainty and unpredictability of energy production, consumption, and management of peak loads has caused an increase in costs for energy market actors. Therefore, the means for studying the balancing of local smart grids with EVs is a starting point for this paper. The main contribution is a simulation-based approach which was developed to enable the study of the balancing of local distribution grids with EV batteries in a cost-efficient manner. The simulation-based approach is applied to enable the execution of a distributed system with the simulation of a local distribution grid, including a number of charging stations and EVs. A simulation system has been constructed to support the simulation-based approach. The evaluation has been carried out by executing the scenario related to balancing local distribution grids with EV batteries in a step-by-step manner. The evaluation results indicate that the simulation-based approach is able to facilitate the evaluation of smart grid– and EV-related communication protocols, control algorithms for charging, and functionalities of local distribution grids as part of a complex, critical cyber-physical system. In addition, the simulation system is able to incorporate advanced methods for monitoring, controlling, tracking, and modeling behavior. The simulation model of the local distribution grid can be executed with the smart control of charging and discharging powers of the EVs according to the load situation in the local distribution grid. The resulting simulation system can be applied to the study of balancing local smart grids with EV

  19. A study on quality and availability of COCTS images of HY- 1 satellite by simulation

    Institute of Scientific and Technical Information of China (English)

    李淑菁; 毛天明; 潘德炉

    2002-01-01

    Hy-1 is a first China's ocean color satellite which will be launched as a piggyback satellite on FY- 1 satellite using Long March rocket. On the satellite there are two sensors: one is the China's ocean color and temperature scanner (COCTS), the other is CCD coastal zone imager (CZI).The COCTS is considered to be a main sensor to play a key role. In order to understand the characteristics of future ocean color images observed, a simulation and evaluation study on the quality and availability of the COCTS image has been done. First, the simulation models are introduced briefly, and typical simulated cases of radiance images at visible bands are introduced, in which the radiance distribution is based on geographic location, the satellite orbital parameters and sensor properties, the simulated method to evaluate the image quality and availability is developed by using the characteristics of image called the complex signal noise ratio ( CSNR ). Meanwhile, a series of the CSNR images are generated from the simulated radiance components for different cases, which can be used to evaluate the quality and availability of the COCTS images before the HY - 1 is placed in orbit. Finally, the quality and availability of the COCTS images are quantitatively analyzed with the simulated CSNR data. The results will be beneficial to all scientists who are in charge of the COCTS mission and to those who plan to use the data from the COCTS.

  20. Study of Monte Carlo Simulation Method for Methane Phase Diagram Prediction using Two Different Potential Models

    KAUST Repository

    Kadoura, Ahmad

    2011-06-06

    Lennard‐Jones (L‐J) and Buckingham exponential‐6 (exp‐6) potential models were used to produce isotherms for methane at temperatures below and above critical one. Molecular simulation approach, particularly Monte Carlo simulations, were employed to create these isotherms working with both canonical and Gibbs ensembles. Experiments in canonical ensemble with each model were conducted to estimate pressures at a range of temperatures above methane critical temperature. Results were collected and compared to experimental data existing in literature; both models showed an elegant agreement with the experimental data. In parallel, experiments below critical temperature were run in Gibbs ensemble using L‐J model only. Upon comparing results with experimental ones, a good fit was obtained with small deviations. The work was further developed by adding some statistical studies in order to achieve better understanding and interpretation to the estimated quantities by the simulation. Methane phase diagrams were successfully reproduced by an efficient molecular simulation technique with different potential models. This relatively simple demonstration shows how powerful molecular simulation methods could be, hence further applications on more complicated systems are considered. Prediction of phase behavior of elemental sulfur in sour natural gases has been an interesting and challenging field in oil and gas industry. Determination of elemental sulfur solubility conditions helps avoiding all kinds of problems caused by its dissolution in gas production and transportation processes. For this purpose, further enhancement to the methods used is to be considered in order to successfully simulate elemental sulfur phase behavior in sour natural gases mixtures.

  1. Use of an adjustable hand plate in studying the perceived horizontal plane during simulated flight.

    Science.gov (United States)

    Tribukait, Arne; Eiken, Ola; Lemming, Dag; Levin, Britta

    2013-07-01

    Quantitative data on spatial orientation would be valuable not only in assessing the fidelity of flight simulators, but also in evaluation of spatial orientation training. In this study a manual indicator was used for recording the subjective horizontal plane during simulated flight. In a six-degrees-of-freedom hexapod hydraulic motion platform simulator, simulating an F-16 aircraft, seven fixed-wing student pilots were passively exposed to two flight sequences. The first consisted in a number of coordinated turns with visual contact with the landscape below. The visually presented roll tilt was up to a maximum 670. The second was a takeoff with a cabin pitch up of 100, whereupon external visual references were lost. The subjects continuously indicated, with the left hand on an adjustable plate, what they perceived as horizontal in roll and pitch. There were two test occasions separated by a 3-d course on spatial disorientation. Responses to changes in simulated roll were, in general, instantaneous. The indicated roll tilt was approximately 30% of the visually presented roll. There was a considerable interindividual variability. However, for the roll response there was a correlation between the two occasions. The amplitude of the response to the pitch up of the cabin was approximately 75%; the response decayed much more slowly than the stimulus. With a manual indicator for recording the subjective horizontal plane, individual characteristics in the response to visual tilt stimuli may be detected, suggesting a potential for evaluation of simulation algorithms or training programs.

  2. Agent Behavior-Based Simulation Study on Mass Collaborative Product Development Process

    Directory of Open Access Journals (Sweden)

    Shuo Zhang

    2015-01-01

    Full Text Available Mass collaborative product development (MCPD benefits people by high innovation products with lower cost and shorter lead time due to quick development of group innovation, Internet-based customization, and prototype manufacturing. Simulation is an effective way to study the evolution process and therefore to guarantee the success of MCPD. In this paper, an agent behavior-based simulation approach of MCPD is developed, which models the MCPD process as the interactive process of design agents and the environment objects based on Complex Adaptive System (CAS theory. Next, the structure model of design agent is proposed, and the modification and collaboration behaviors are described. Third, the agent behavior-based simulation flow of MCPD is designed. At last, simulation experiments are carried out based on an engineering case of mobile phone design. The experiment results show the following: (1 the community scale has significant influence on MCPD process; (2 the simulation process can explicitly represent the modification and collaboration behaviors of design agents; (3 the community evolution process can be observed and analyzed dynamically based on simulation data.

  3. Comparative study of the performance of quantum annealing and simulated annealing.

    Science.gov (United States)

    Nishimori, Hidetoshi; Tsuda, Junichi; Knysh, Sergey

    2015-01-01

    Relations of simulated annealing and quantum annealing are studied by a mapping from the transition matrix of classical Markovian dynamics of the Ising model to a quantum Hamiltonian and vice versa. It is shown that these two operators, the transition matrix and the Hamiltonian, share the eigenvalue spectrum. Thus, if simulated annealing with slow temperature change does not encounter a difficulty caused by an exponentially long relaxation time at a first-order phase transition, the same is true for the corresponding process of quantum annealing in the adiabatic limit. One of the important differences between the classical-to-quantum mapping and the converse quantum-to-classical mapping is that the Markovian dynamics of a short-range Ising model is mapped to a short-range quantum system, but the converse mapping from a short-range quantum system to a classical one results in long-range interactions. This leads to a difference in efficiencies that simulated annealing can be efficiently simulated by quantum annealing but the converse is not necessarily true. We conclude that quantum annealing is easier to implement and is more flexible than simulated annealing. We also point out that the present mapping can be extended to accommodate explicit time dependence of temperature, which is used to justify the quantum-mechanical analysis of simulated annealing by Somma, Batista, and Ortiz. Additionally, an alternative method to solve the nonequilibrium dynamics of the one-dimensional Ising model is provided through the classical-to-quantum mapping.

  4. A Study on Evaluation of Training Program for MCR Operators of SMART Simulator

    Energy Technology Data Exchange (ETDEWEB)

    Park, Hyun Jun; Lee, Joon Ku; Jeong, Kwang Il [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2015-10-15

    It is important to develop a training program by simulators in main control room of nuclear power plants because there is no an operation expert and no operating experience in the pre-construction phase of nuclear power plants. It is also necessary to develop a training program and its evaluation method taking human error into account. The purpose of this study is developing evaluation model of simulators. In a training program, once training requirements are selected, evaluation of training is as important as its implementation. Training effectiveness is available value in a simulator-based environment. The main control room of SMART (System-integrated Modular Advanced ReacTor) is consist of workstation, visual display units such as LDP and FPD based on digital systems. Cognitive behaviors of a high level are required to operators in these man-machine interface system (MMIS). Therefore, it is essential to identify training requirements and to develop its evaluation model. Virtual Environments such as a simulator have utilized by a lot of industries and companies for training and accident prevention. Simulators have three primary benefits. The first is that training by simulators is less expensive than those in real environment. The second is that simulators enable safety enhancement using systematic training program. The third is that simulators provide a preliminary to prevent human error. It is significant to apply TER, TCR, TCE in evaluation of training effect. It is expected that these could be applied to revise training criteria and enable to consider efficiency in terms of cost and benefit.

  5. A Study of the Characteristics of Human-Pilot Control Response to Simulated Aircraft Lateral Motions

    Science.gov (United States)

    Cheatham, Donald C

    1954-01-01

    Report presents the results of studies made in an attempt to provide information on the control operations of the human pilot. These studies included an investigation of the ability of pilots to control simulated unstable yawing oscillations, a study of the basic characteristics of human-pilot control response, and a study to determine whether and to what extent pilot control response can be represented in an analytical form.

  6. Simulation study on the starting characteristics of a kind of improved direct torque control system

    Institute of Scientific and Technical Information of China (English)

    YE Jin-jiao; MENG Qing-chun; GUO Rui

    2004-01-01

    Analyzed working principle and starting process of asynchronous motor direct torque control system. In order to solve the problem of serious fluctuation of starting current in traditional control scheme, the author puts forward a new kind of starting method which can limit voltage value to achieve the goal of reducing fluctuation of the current by increasing zero voltage vectors during the stage of starting. The author has also carried on simulation study on the system, and the result of simulation study shows that this method is effectual.

  7. Anybody can do Value at Risk: A Teaching Study using Parametric Computation and Monte Carlo Simulation

    Directory of Open Access Journals (Sweden)

    Yun Hsing Cheung

    2012-12-01

    Full Text Available The three main Value at Risk (VaR methodologies are historical, parametric and Monte Carlo Simulation.Cheung & Powell (2012, using a step-by-step teaching study, showed how a nonparametric historical VaRmodel could be constructed using Excel, thus benefitting teachers and researchers by providing them with areadily useable teaching study and an inexpensive and flexible VaR modelling option. This article extends thatwork by demonstrating how parametric and Monte Carlo Simulation VaR models can also be constructed inExcel, thus providing a total Excel modelling package encompassing all three VaR methods.

  8. Simulation studies of radiation linewidth in circular Josephson-junction fluxon oscillators

    DEFF Research Database (Denmark)

    If, F.; Christiansen, Peter Leth; Parmentier, R. D.

    1985-01-01

    Detailed simulation studies of the dynamics of fluxons in long circular Josephson tunnel junctions under the influence of external microwave radiation and internal thermal noise are presented. The simulation algorithm uses a pseudospectral method well adapted to vector processors (CRAY-1-S), which...... gives a speed-up factor in computing time of typically 22 in comparison to conventional high-speed computers, and also provides results with a relative accuracy of less than 10-8 thereby making possible the study of the very narrow radiation linewidth of such oscillators. Comparison of calculated...

  9. Preliminary study on LGM climate simulation and the diagnosis for East Asia

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    LGM climate study is a hot topic in international fields on global changes. Climate simulation in this study applies both common designs of 21 kaBP boundary conditions from the Paleoclimate Modeling Intercomparison Project (PMIP), including insolation, glaciation, sea surface temperature and atmospheric CO2 concentration, and land surface conditions from Eurasia continent by compilation of geological evidence. The simulation outputs are in agreement with climate spatial patterns reconstructed by observation records. Sensitive experiment on land surface conditions shows that changes in vegetation would make significant impacts on temperature and precipitation. Particularly in the Tibetan Plateau, this change would increase in differences of winter and summer temperature, precipitation and P-E.

  10. Formulation of and numerical studies with the Dutch Atmospheric Large-Eddy Simulation (DALES

    Directory of Open Access Journals (Sweden)

    T. Heus

    2010-02-01

    Full Text Available The current version of the Dutch Atmospheric Large-Eddy Simulation (DALES model is presented. DALES is a large-eddy simulation model designed for process studies of the atmospheric boundary layer, including convective and stable boundary layers as well as cloudy boundary layers. In addition, DALES can be used for studies of more specific cases, such as flow over sloping or heterogeneous terrain, and dispersion of inert and chemically active species. This paper contains an extensive description of the physical and numerical formulation of the code, and gives an overview of its applications and accomplishments in recent years.

  11. Validation study of a computer-based open surgical trainer: SimPraxis® simulation platform

    Directory of Open Access Journals (Sweden)

    Tran LN

    2013-03-01

    Full Text Available Linh N Tran,1 Priyanka Gupta,2 Lauren H Poniatowski,2 Shaheen Alanee,3 Marc A Dall’Era,4 Robert M Sweet21Department of Internal Medicine, Loma Linda University, Loma Linda, CA, 2Department of Urology, University of Minnesota, Minneapolis, MN, 3Urology Service, Department of Surgery, Memorial Sloan-Kettering Cancer Center, New York, NY, 4Department of Urology, University of California, Davis, CA, USABackground: Technological advances have dramatically changed medical education, particularly in the era of work-hour restrictions, which increasingly highlights a need for novel methods to teach surgical skills. The purpose of this study was to evaluate the validity of a novel, computer-based, interactive, cognitive simulator for training surgeons to perform pelvic lymph node dissection (PLND.Methods: Eight prostate cancer experts evaluated the content of the simulator. Contextual aspects of the simulator were rated on a five-point Likert scale. The experts and nine first-year residents completed a simulated PLND. Time and deviations were logged, and the results were compared between experts and novices using the Mann–Whitney test.Results: Before training, 88% of the experts felt that a validated simulator would be useful for PLND training. After testing, 100% of the experts felt that it would be more useful than standard video training. Eighty-eight percent stated that they would like to see the simulator in the curriculum of residency programs and 56% thought it would be useful for accreditation purposes. The experts felt that the simulator aided in overall understanding, training indications, concepts and steps of the procedure, training how to use an assistant, and enhanced the knowledge of anatomy. Median performance times taken by experts and interns to complete a PLND procedure on the simulator were 12.62 and 23.97 minutes, respectively. Median deviation from the incorporated procedure pathway for experts was 24.5 and was 89 for novices

  12. Simulation Based Studies of Low Latency Teleoperations for NASA Exploration Missions

    Science.gov (United States)

    Gernhardt, Michael L.; Crues, Edwin Z.; Bielski, Paul; Dexter, Dan; Litaker, Harry L.; Chappell, Steven P.; Beaton, Kara H.; Bekdash, Omar S.

    2017-01-01

    Human exploration of Mars will involve both crewed and robotic systems. Many mission concepts involve the deployment and assembly of mission support assets prior to crew arrival on the surface. Some of these deployment and assembly activities will be performed autonomously while others will be performed using teleoperations. However, significant communications latencies between the Earth and Mars make teleoperations challenging. Alternatively, low latency teleoperations are possible from locations in Mars orbit like Mars' moons Phobos and Deimos. To explore these latency opportunities, NASA is conducting a series of studies to investigate the effects of latency on telerobotic deployment and assembly activities. These studies are being conducted in laboratory environments at NASA's Johnson Space Center (JSC), the Human Exploration Research Analog (HERA) at JSC and the NASA Extreme Environment Mission Operations (NEEMO) underwater habitat off the coast of Florida. The studies involve two human-in-the-loop interactive simulations developed by the NASA Exploration Systems Simulations (NExSyS) team at JSC. The first simulation investigates manipulation related activities while the second simulation investigates mobility related activities. The first simulation provides a simple real-time operator interface with displays and controls for a simulated 6 degree of freedom end effector. The initial version of the simulation uses a simple control mode to decouple the robotic kinematic constraints and a communications delay to model latency effects. This provides the basis for early testing with more detailed manipulation simulations planned for the future. Subjects are tested using five operating latencies that represent teleoperation conditions from local surface operations to orbital operations at Phobos, Deimos and ultimately high Martian orbit. Subject performance is measured and correlated with three distance-to-target zones of interest. Each zone represents a target

  13. An evaluation of edge effects in nutritional accessibility and availability measures: a simulation study

    Directory of Open Access Journals (Sweden)

    Porter Dwayne E

    2010-07-01

    Full Text Available Abstract Background This paper addresses the statistical use of accessibility and availability indices and the effect of study boundaries on these measures. The measures are evaluated via an extensive simulation based on cluster models for local outlet density. We define outlet to mean either food retail store (convenience store, supermarket, gas station or restaurant (limited service or full service restaurants. We designed a simulation whereby a cluster outlet model is assumed in a large study window and an internal subset of that window is constructed. We performed simulations on various criteria including one scenario representing an urban area with 2000 outlets as well as a non-urban area simulated with only 300 outlets. A comparison is made between estimates obtained with the full study area and estimates using only the subset area. This allows the study of the effect of edge censoring on accessibility measures. Results The results suggest that considerable bias is found at the edges of study regions in particular for accessibility measures. Edge effects are smaller for availability measures (when not smoothed and also for short range accessibility Conclusions It is recommended that any study utilizing these measures should correct for edge effects. The use of edge correction via guard areas is recommended and the avoidance of large range distance-based accessibility measures is also proposed.

  14. Identification of Barriers to Pediatric Care in Limited-Resource Settings: A Simulation Study.

    Science.gov (United States)

    Shilkofski, Nicole; Hunt, Elizabeth A

    2015-12-01

    Eighty percent of the 10 million annual deaths in children aged education for pediatric emergency management being a key factor. Education must take into account cultural considerations to be effective. Study objectives were: (1) to use simulation to identify factors posing barriers to patient care in limited resource settings (LRS); and (2) to understand how simulations in LRS can affect communication and decision-making processes. A qualitative study was conducted at 17 different sites in 12 developing countries in Asia, Latin America, and Africa. Data from observations of 68 in situ simulated pediatric emergencies were coded for thematic analysis. Sixty-two different "key informants" were interviewed regarding perceived benefit of simulations. Coding of observations and interviews yielded common themes: impact of culture on team hierarchy, impact of communication and language barriers on situational awareness, systematic emergency procedures, role delineation, shared cognition and resource awareness through simulation, logistic barriers to patient care, and use of recognition-primed decision-making by experienced clinicians. Changes in clinical environments were implemented as a result of simulations. Ad hoc teams in LRS face challenges in caring safely for patients; these include language and cultural barriers, as well as environmental and resource constraints. Engaging teams in simulations may promote improved communication, identification of systems issues and latent threats to target for remediation. There may be a role for training novices in use of recognition-primed or algorithmic decision-making strategies to improve rapidity and efficiency of decisions in LRS. Copyright © 2015 by the American Academy of Pediatrics.

  15. Thermal expansion coefficient of graphene using molecular dynamics simulation: A comparative study on potential functions

    Science.gov (United States)

    Ghasemi, Hamid; Rajabpour, Ali

    2017-01-01

    In this paper, we studied the thermal expansion coefficient (TEC) of pristine graphene sheets (GSs) using molecular dynamics (MD) simulation. We validated our model with previous studies employing AIREBO potential function and repeated the same simulation with the optimized Tersoff potential function. We also discussed the differences of the results and the corresponding reasons: evaluating the negative TEC of graphene by measuring the C-C bond length and out-of-plane vibrations of the GS. We finally showed that the ripples and wrinkles are more represented over the GS during the simulation with the AIREBO potential function rather than the optimized Tersoff. Comparing the results of both potential functions; it is seen that the results obtained by AIREBO potential function are in better agreement with those reported by previous scholars.

  16. A Multi-agent Simulation Tool for Micro-scale Contagion Spread Studies

    Energy Technology Data Exchange (ETDEWEB)

    Koch, Daniel B [ORNL

    2016-01-01

    Within the disaster preparedness and emergency response community, there is interest in how contagions spread person-to-person at large gatherings and if mitigation strategies can be employed to reduce new infections. A contagion spread simulation module was developed for the Incident Management Preparedness and Coordination Toolkit that allows a user to see how a geographically accurate layout of the gathering space helps or hinders the spread of a contagion. The results can inform mitigation strategies based on changing the physical layout of an event space. A case study was conducted for a particular event to calibrate the underlying simulation model. This paper presents implementation details of the simulation code that incorporates agent movement and disease propagation. Elements of the case study are presented to show how the tool can be used.

  17. Using simulation to develop testable functionalist explanations: a case study of church survival.

    Science.gov (United States)

    Chattoe, Edmund

    2006-09-01

    Many arguments for and against functionalism have revolved around logical and methodological issues, discouraging attempts to develop testable functionalist theories. This paper takes a different approach, arguing that the problem with sociological functionalism is not its logic of explanation but the absence of appropriate techniques for formalizing functionalist theories. The solution presented --agent-based simulation --is illustrated by a case study: a functionalist account of church survival. The case study suggests that there is nothing wrong with the logic of functionalism properly formalized, illustrates how simulation can enable testing of functionalist explanations and suggests why existing sociological methods have not proved fruitful for this task. In the light of new techniques like simulation, the current neglect of functionalism may no longer be justified.

  18. Closed-loop controller for chest compressions based on coronary perfusion pressure: a computer simulation study.

    Science.gov (United States)

    Wang, Chunfei; Zhang, Guang; Wu, Taihu; Zhan, Ningbo; Wang, Yaling

    2016-03-01

    High-quality cardiopulmonary resuscitation contributes to cardiac arrest survival. The traditional chest compression (CC) standard, which neglects individual differences, uses unified standards for compression depth and compression rate in practice. In this study, an effective and personalized CC method for automatic mechanical compression devices is provided. We rebuild Charles F. Babbs' human circulation model with a coronary perfusion pressure (CPP) simulation module and propose a closed-loop controller based on a fuzzy control algorithm for CCs, which adjusts the CC depth according to the CPP. Compared with a traditional proportion-integration-differentiation (PID) controller, the performance of the fuzzy controller is evaluated in computer simulation studies. The simulation results demonstrate that the fuzzy closed-loop controller results in shorter regulation time, fewer oscillations and smaller overshoot than traditional PID controllers and outperforms the traditional PID controller for CPP regulation and maintenance.

  19. Development of simulator for studying formation process of crustal structure. 1; Chikaku kozo keisei simulator no kaihatsu. 1

    Energy Technology Data Exchange (ETDEWEB)

    Matsushima, J. [The University of Tokyo, Tokyo (Japan). Faculty of Engineering; Murakami, Y.; Okubo, Y.; Matsubayashi, O.; Tanaka, A.; Nakajima, Y.; Morijiri, R. [Geological Survey of Japan, Tsukuba (Japan); Rokugawa, S. [The University of Tokyo, Tokyo (Japan)

    1997-05-27

    The purpose of this study is to combine seismic activity and volcanic activity by reproducing the formation process of the crustal structure from a physical viewpoint or developing as its extension a numerical simulator which can predict the future. The phenomenon to which attention is especially paid at present is a relation between the dynamic process and the thermal process in the domain including the crust or the upper mantle. Namely, to elucidate the formation process of the crust structure, diastrophism also including seismic activity, igneous activity, etc., it is important to evaluate effects of the behavior of heat supplied from the deep on the dynamic process. In the finite element method, it is not easy to make the effect of gravity reflect to the calculation for boundary conditions. Accordingly, it is general to pay attention to stress difference, considering that stress by gravity is in proportion to static rock pressure stress. Further, to realize interaction between the thermal process and the dynamic process, effects of thermal stress are expressed combining the heat conducting analysis and the plastic flow analysis. 3 refs., 7 figs.

  20. Hydrologic Simulations Driven by Satellite Rainfall to Study the Hydroelectric Development Impacts on River Flow

    Directory of Open Access Journals (Sweden)

    Tuan B. Le

    2014-11-01

    Full Text Available This study assesses the impact of hydroelectric dams on the discharge and total suspended solids (TSS concentration in the Huong River basin in Vietnam. The analysis is based on hydrologic and sediment transport simulations by the Soil and Water Assessment Tool (SWAT model driven by the Tropical Rainfall Measuring Mission (TRMM 3B42V6 rainfall data, from January 2003 through December 2010. An upstream sub-basin not affected by the hydroelectric dams was used for model calibration. The calibration results indicate good agreement between simulated and observed daily data (0.67 Nash-Sutcliffe efficiency, 0.82 Pearson correlation coefficient. The calibrated model for discharge and TSS simulation is then applied on another major sub-basin and then the whole Huong River basin. The simulation results indicate that dam operation in 2010 decreased downstream discharge during the rainy season by about 35% and augmented it during the dry season by about 226%. The downstream TSS concentration has decreased due to the dam operation but the total sediment loading increased during the dry season and decreased during the rainy season. On average, the dam construction and operation affected the pattern of discharge more than that of the sediment loading. Results indicate that SWAT, driven by remotely sensed inputs, can reasonably simulate discharge and water quality in ungauged or poorly gauged river basins and can be very useful for water resources assessment and climate change impact studies in such basins.

  1. Multimodal integration of high-resolution EEG and functional magnetic resonance imaging data: a simulation study.

    Science.gov (United States)

    Babiloni, F; Babiloni, C; Carducci, F; Romani, G L; Rossini, P M; Angelone, L M; Cincotti, F

    2003-05-01

    Previous simulation studies have stressed the importance of the use of fMRI priors in the estimation of cortical current density. However, no systematic variations of signal-to-noise ratio (SNR) and number of electrodes were explicitly taken into account in the estimation process. In this simulation study we considered the utility of including information as estimated from fMRI. This was done by using as the dependent variable both the correlation coefficient and the relative error between the imposed and the estimated waveforms at the level of cortical region of interests (ROI). A realistic head and cortical surface model was used. Factors used in the simulations were the different values of SNR of the scalp-generated data, the different inverse operators used to estimated the cortical source activity, the strengths of the fMRI priors in the fMRI-based inverse operators, and the number of scalp electrodes used in the analysis. Analysis of variance results suggested that all the considered factors significantly afflict the correlation and the relative error between the estimated and the simulated cortical activity. For the ROIs analyzed with simulated fMRI hot spots, it was observed that the best estimation of cortical source currents was performed with the inverse operators that used fMRI information. When the ROIs analyzed do not present fMRI hot spots, both standard (i.e., minimum norm) and fMRI-based inverse operators returned statistically equivalent correlation and relative error values.

  2. A Validation Study of Merging and Spacing Techniques in a NAS-Wide Simulation

    Science.gov (United States)

    Glaab, Patricia C.

    2011-01-01

    In November 2010, Intelligent Automation, Inc. (IAI) delivered an M&S software tool to that allows system level studies of the complex terminal airspace with the ACES simulation. The software was evaluated against current day arrivals in the Atlanta TRACON using Atlanta's Hartsfield-Jackson International Airport (KATL) arrival schedules. Results of this validation effort are presented describing data sets, traffic flow assumptions and techniques, and arrival rate comparisons between reported landings at Atlanta versus simulated arrivals using the same traffic sets in ACES equipped with M&S. Initial results showed the simulated system capacity to be significantly below arrival capacity seen at KATL. Data was gathered for Atlanta using commercial airport and flight tracking websites (like FlightAware.com), and analyzed to insure compatible techniques were used for result reporting and comparison. TFM operators for Atlanta were consulted for tuning final simulation parameters and for guidance in flow management techniques during high volume operations. Using these modified parameters and incorporating TFM guidance for efficiencies in flowing aircraft, arrival capacity for KATL was matched for the simulation. Following this validation effort, a sensitivity study was conducted to measure the impact of variations in system parameters on the Atlanta airport arrival capacity.

  3. A simulation study provided sample size guidance for differential item functioning (DIF) studies using short scales

    DEFF Research Database (Denmark)

    Scott, Neil W; Fayers, Peter M; Aaronson, Neil K;

    2009-01-01

    Differential item functioning (DIF) analyses are increasingly used to evaluate health-related quality of life (HRQoL) instruments, which often include relatively short subscales. Computer simulations were used to explore how various factors including scale length affect analysis of DIF by ordinal...

  4. Goals, Success Factors, and Barriers for Simulation-Based Learning: A Qualitative Interview Study in Health Care

    Science.gov (United States)

    Dieckmann, Peter; Friis, Susanne Molin; Lippert, Anne; Ostergaard, Doris

    2012-01-01

    Introduction: This study describes (a) process goals, (b) success factors, and (c) barriers for optimizing simulation-based learning environments within the simulation setting model developed by Dieckmann. Methods: Seven simulation educators of different experience levels were interviewed using the Critical Incident Technique. Results: (a) The…

  5. Molecular dynamics simulation study of the melting of Pd-Pt nanoclusters

    Science.gov (United States)

    Sankaranarayanan, Subramanian K. R. S.; Bhethanabotla, Venkat R.; Joseph, Babu

    2005-05-01

    Bimetallic nanoclusters are of interest because of their utility in catalysis and sensors. The thermal characteristics of bimetallic Pt-Pd nanoclusters of different sizes and compositions were investigated through molecular dynamics simulations using quantum Sutton-Chen (QSC) many-body potentials. Monte Carlo simulations employing the bond order simulation model were used to generate minimum energy configurations, which were utilized as the starting point for molecular dynamics simulations. The calculated initial configurations of the Pt-Pd system consisted of surface segregated Pd atoms and a Pt-rich core. Melting characteristics were studied by following the changes in potential energy and heat capacity as functions of temperature. Structural changes accompanying the thermal evolution were studied by the bond order parameter method. The Pt-Pd clusters exhibited a two-stage melting: surface melting of the external Pd atoms followed by homogeneous melting of the Pt core. These transitions were found to depend on the composition and size of the nanocluster. Melting temperatures of the nanoclusters were found to be much lower than those of bulk Pt and Pd. Bulk melting temperatures of Pd and Pt simulated using periodic boundary conditions compare well with experimental values, thus providing justification for the use of QSC potentials in these simulations. Deformation parameters were calculated to characterize the structural evolution resulting from diffusion of Pd and Pt atoms. The results indicate that in Pd-Pt clusters, Pd atoms prefer to remain at the surface even after melting. In addition, Pt also tends to diffuse to the surface after melting due to reduction of its surface energy with temperature. This mixing pattern is different from those reported in some of the earlier studies on melting of bimetallics.

  6. A simulation study of acoustic-assisted tracking of whales for mark-recapture surveys.

    Science.gov (United States)

    Peel, David; Miller, Brian S; Kelly, Natalie; Dawson, Steve; Slooten, Elisabeth; Double, Michael C

    2014-01-01

    Collecting enough data to obtain reasonable abundance estimates of whales is often difficult, particularly when studying rare species. Passive acoustics can be used to detect whale sounds and are increasingly used to estimate whale abundance. Much of the existing effort centres on the use of acoustics to estimate abundance directly, e.g. analysing detections in a distance sampling framework. Here, we focus on acoustics as a tool incorporated within mark-recapture surveys. In this context, acoustic tools are used to detect and track whales, which are then photographed or biopsied to provide data for mark-recapture analyses. The purpose of incorporating acoustics is to increase the encounter rate beyond using visual searching only. While this general approach is not new, its utility is rarely quantified. This paper predicts the "acoustically-assisted" encounter rate using a discrete-time individual-based simulation of whales and survey vessel. We validate the simulation framework using existing data from studies of sperm whales. We then use the framework to predict potential encounter rates in a study of Antarctic blue whales. We also investigate the effects of a number of the key parameters on encounter rate. Mean encounter rates from the simulation of sperm whales matched well with empirical data. Variance of encounter rate, however, was underestimated. The simulation of Antarctic blue whales found that passive acoustics should provide a 1.7-3.0 fold increase in encounter rate over visual-only methods. Encounter rate was most sensitive to acoustic detection range, followed by vocalisation rate. During survey planning and design, some indication of the relationship between expected sample size and effort is paramount; this simulation framework can be used to predict encounter rates and establish this relationship. For a case in point, the simulation framework indicates unequivocally that real-time acoustic tracking should be considered for quantifying the abundance

  7. A simulation study of acoustic-assisted tracking of whales for mark-recapture surveys.

    Directory of Open Access Journals (Sweden)

    David Peel

    Full Text Available Collecting enough data to obtain reasonable abundance estimates of whales is often difficult, particularly when studying rare species. Passive acoustics can be used to detect whale sounds and are increasingly used to estimate whale abundance. Much of the existing effort centres on the use of acoustics to estimate abundance directly, e.g. analysing detections in a distance sampling framework. Here, we focus on acoustics as a tool incorporated within mark-recapture surveys. In this context, acoustic tools are used to detect and track whales, which are then photographed or biopsied to provide data for mark-recapture analyses. The purpose of incorporating acoustics is to increase the encounter rate beyond using visual searching only. While this general approach is not new, its utility is rarely quantified. This paper predicts the "acoustically-assisted" encounter rate using a discrete-time individual-based simulation of whales and survey vessel. We validate the simulation framework using existing data from studies of sperm whales. We then use the framework to predict potential encounter rates in a study of Antarctic blue whales. We also investigate the effects of a number of the key parameters on encounter rate. Mean encounter rates from the simulation of sperm whales matched well with empirical data. Variance of encounter rate, however, was underestimated. The simulation of Antarctic blue whales found that passive acoustics should provide a 1.7-3.0 fold increase in encounter rate over visual-only methods. Encounter rate was most sensitive to acoustic detection range, followed by vocalisation rate. During survey planning and design, some indication of the relationship between expected sample size and effort is paramount; this simulation framework can be used to predict encounter rates and establish this relationship. For a case in point, the simulation framework indicates unequivocally that real-time acoustic tracking should be considered for

  8. Muscular workload of veterinary students during simulated open and laparoscopic surgery: A pilot study.

    Science.gov (United States)

    Kilkenny, Jessica; Larson, Dennis J; MacCormick, Mathew; Brown, Stephen H M; Singh, Ameet

    2017-08-01

    To compare upper extremity muscle activity and workload between simulated open surgery, multiple port laparoscopic surgery (MLS), and single incision laparoscopic surgery (SLS) techniques in veterinary students. Pilot study. Veterinary students (n = 10) from years 1 to 4. Bipolar skin surface electrodes were fixed bilaterally to the forearm flexor, forearm extensor, biceps brachii, triceps brachii, and upper trapezius muscles. Electromyography data were recorded during one repetition of 2 simulated surgical exercises via open surgery, MLS, and SLS. Participants completed a validated workload survey after each simulated surgical technique. Muscle activity and perceived workload were compared between surgical techniques with 1-way ANOVAs and Fisher's LSD post hoc tests. Muscle activity during peg transfer was higher with MLS and SLS compared to simulated open surgery in the right and left forearm extensors (both P < .0001), right (P < .0001) and left biceps (P = .0005), right triceps (P = .0004), and right upper trapezius muscles (P = .0211). Similar results were found for the right and left forearm extensors (both P < .0001), right (P = .0381) and left (P = .0147) forearm flexors, right biceps (P < .0001), and right triceps (P = .0004) during a simulated suture task. Participants found laparoscopic techniques more mentally demanding, physically demanding, complex, and stressful compared to a simulated open surgical technique. In veterinary students, average muscle activity and perceived workload were highest using MLS and SLS compared to an open surgical technique when performing simulated surgical exercises in a laparoscopic box trainer. © 2017 The American College of Veterinary Surgeons.

  9. Multi-scale Computer Simulations to Study the Reaction Zone of Solid Explosives

    Energy Technology Data Exchange (ETDEWEB)

    Reaugh, J E

    2006-06-23

    We have performed computer simulations at several different characteristic length scales to study the coupled mechanical, thermal, and chemical behavior of explosives under shock and other pressure loadings. Our objective is to describe the underlying physics and chemistry of the hot-spot theory for solid explosives, with enough detail to make quantitative predictions of the expected result from a given pressure loading.

  10. A Simulation Study on the Throughput Performance of TCP over Wireless Fading Channel

    Institute of Scientific and Technical Information of China (English)

    YAO Ling; JI Hong; YUE Guang-xin

    2004-01-01

    Using Markov model and the network simulator-NS, this paper studies the TCP throughput performance in wireless fading channel where the packets losses are always caused by high and burst errors. The results show that the burstiness in packet errors caused by slow multipath fading benefits Reno compared to i.i.d packet errors.

  11. Simulation, Role-Playing, and Sociodrama in the Social Studies. With an Annotated Bibliography.

    Science.gov (United States)

    Garvey, Dale M.; Garvey, Sancha K.

    1967-01-01

    Classroom experience for social studies students in simulation, role-playing, and sociodrama provides not only an interesting way of learning, but also an appreciation for the complexity and interdependence of social systems in the modern world. Role-playing requires a student to assume an identity other than his own to increase his understanding…

  12. Cost-effectiveness of intestinal transplantation for adult patients with intestinal failure : a simulation study

    NARCIS (Netherlands)

    Roskott, Anne Margot; Groen, Henk; Rings, Edmond H. H. M.; Haveman, Jan Willem; Ploeg, Rutger J.; Serlie, Mireille J.; Wanten, Geert; Krabbe, Paul F. M.; Dijkstra, Gerard

    2015-01-01

    Background: Home parenteral nutrition (HPN) and intestinal transplantation (ITx) are the 2 treatment options for irreversible intestinal failure (IF). Objective: This study simulated the disease course of irreversible IF and both of these treatments HPN and ITx to estimate the cost-effectiveness of

  13. Self-diffusion in the hexagonal structure of Zirconium and Hafnium: computer simulation studies

    Directory of Open Access Journals (Sweden)

    Diego Hernán Ruiz

    2005-12-01

    Full Text Available Self-diffusion by vacancy mechanism is studied in two metals of hexagonal close packed structure, namely Hafnium and Zirconium. Computer simulation techniques are used together with many-body potentials of the embedded atom type. Defect properties are calculated at 0 K by molecular static while molecular dynamic is used to explore a wide temperature range.

  14. A comparative study of psychophysiological reactions during simulator and real flight

    NARCIS (Netherlands)

    Veltman, J.A.

    2002-01-01

    During selection tests in a flight simulator and a real aircraft, physiological workload measures were evaluated. The selection context guaranteed high motivation in the participant to exert additional effort during difficult flight tasks. The aim of the study was to obtain information about the sen

  15. An Overview and Study on the Use of Games, Simulations, and Gamification in Higher Education

    Science.gov (United States)

    Wiggins, Bradley E.

    2016-01-01

    This article examines the use of both game-based learning (GBL) and gamification in tertiary education. This study focuses specifically on the use of games and/or simulations as well as familiarity with gamification strategies by communication faculty. Research questions concentrate on the rate, frequency, and usage of digital and non-digital…

  16. Genetic analysis of tolerance to infections using random regressions: a simulation study

    NARCIS (Netherlands)

    Kause, A.

    2011-01-01

    Tolerance to infections is the ability of a host to limit the impact of a given pathogen burden on host performance. This simulation study demonstrated the merit of using random regressions to estimate unbiased genetic variances for tolerance slope and its genetic correlations with other traits,

  17. The Statistical Power of the Cluster Randomized Block Design with Matched Pairs--A Simulation Study

    Science.gov (United States)

    Dong, Nianbo; Lipsey, Mark

    2010-01-01

    This study uses simulation techniques to examine the statistical power of the group- randomized design and the matched-pair (MP) randomized block design under various parameter combinations. Both nearest neighbor matching and random matching are used for the MP design. The power of each design for any parameter combination was calculated from…

  18. Undercover careseekers: simulated clients in the study of health provider behavior in developing countries.

    Science.gov (United States)

    Madden, J M; Quick, J D; Ross-Degnan, D; Kafle, K K

    1997-11-01

    The simulated client method (SCM) has been used for over 20 years to study health care provider behavior in a first-hand way while minimizing observation bias. In developing countries, it has proven useful in the study of physicians, drug retailers, and family planning services. In SCM, research assistants with fictitious case scenarios (or with stable conditions or a genuine interest in the services) visit providers and request their assistance. Providers are not aware that these clients are involved in research. Simulated clients later report on the events of their visit and these data are analyzed. This paper reviews 23 developing country studies of physician, drug retail, and family planning services in order to draw conclusions about (1) the advantages and limitations of the methods; (2) considerations for design and implementation of a simulated client study; (3) validity and reliability; and (4) ethical concerns. Examples are also drawn from industrialized countries, related methodologies, and non-health fields to illustrate the issues surrounding SCM. Based on this review, we conclude that the information gathered through the use of simulated clients is unique and valuable for managers, intervention planners and evaluators, social scientist, regulators, and others. Areas that need to be explored in future work with this method include: ways to ensure data validity and reliability; research on additional types of providers and health care needs; and adaptation of the technique for routine use.

  19. Assessing Critical Thinking Outcomes of Dental Hygiene Students Utilizing Virtual Patient Simulation: A Mixed Methods Study.

    Science.gov (United States)

    Allaire, Joanna L

    2015-09-01

    Dental hygiene educators must determine which educational practices best promote critical thinking, a quality necessary to translate knowledge into sound clinical decision making. The aim of this small pilot study was to determine whether virtual patient simulation had an effect on the critical thinking of dental hygiene students. A pretest-posttest design using the Health Science Reasoning Test was used to evaluate the critical thinking skills of senior dental hygiene students at The University of Texas School of Dentistry at Houston Dental Hygiene Program before and after their experience with computer-based patient simulation cases. Additional survey questions sought to identify the students' perceptions of whether the experience had helped develop their critical thinking skills and improved their ability to provide competent patient care. A convenience sample of 31 senior dental hygiene students completed both the pretest and posttest (81.5% of total students in that class); 30 senior dental hygiene students completed the survey on perceptions of the simulation (78.9% response rate). Although the results did not show a significant increase in mean scores, the students reported feeling that the use of virtual patients was an effective teaching method to promote critical thinking, problem-solving, and confidence in the clinical realm. The results of this pilot study may have implications to support the use of virtual patient simulations in dental hygiene education. Future research could include a larger controlled study to validate findings from this study.

  20. Local anharmonic vibrations strong correlations and superconductivity : a quantum simulation study

    NARCIS (Netherlands)

    Frick, M.; Linden, W. von der; Morgenstern, I.; Raedt, H. de

    1990-01-01

    We investigate the importance of local anharmonic vibrations of the bridging oxygen in the copper oxide high-Tc materials in the context of superconductivity. For the numerical simulation we employ the projector quantum Monte Carlo method to study the ground state properties of the coupled electron-