WorldWideScience

Sample records for gaz application au

  1. Fluctuations Magnetiques des Gaz D'electrons Bidimensionnels: Application AU Compose Supraconducteur LANTHANE(2-X) Strontium(x) Cuivre OXYGENE(4)

    Science.gov (United States)

    Benard, Pierre

    Nous presentons une etude des fluctuations magnetiques de la phase normale de l'oxyde de cuivre supraconducteur La_{2-x}Sr _{x}CuO_4 . Le compose est modelise par le Hamiltonien de Hubbard bidimensionnel avec un terme de saut vers les deuxiemes voisins (modele tt'U). Le modele est etudie en utilisant l'approximation de la GRPA (Generalized Random Phase Approximation) et en incluant les effets de la renormalisation de l'interaction de Hubbard par les diagrammes de Brueckner-Kanamori. Dans l'approche presentee dans ce travail, les maximums du facteur de structure magnetique observes par les experiences de diffusion de neutrons sont associes aux anomalies 2k _{F} de reseau du facteur de structure des gaz d'electrons bidimensionnels sans interaction. Ces anomalies proviennent de la diffusion entre particules situees a des points de la surface de Fermi ou les vitesses de Fermi sont tangentes, et conduisent a des divergences dont la nature depend de la geometrie de la surface de Fermi au voisinage de ces points. Ces resultats sont ensuite appliques au modele tt'U, dont le modele de Hubbard usuel tU est un cas particulier. Dans la majorite des cas, les interactions ne determinent pas la position des maximums du facteur de structure. Le role de l'interaction est d'augmenter l'intensite des structures du facteur de structure magnetique associees a l'instabilite magnetique du systeme. Ces structures sont souvent deja presentes dans la partie imaginaire de la susceptibilite sans interaction. Le rapport d'intensite entre les maximums absolus et les autres structures du facteur de structure magnetique permet de determiner le rapport U_ {rn}/U_{c} qui mesure la proximite d'une instabilite magnetique. Le diagramme de phase est ensuite etudie afin de delimiter la plage de validite de l'approximation. Apres avoir discute des modes collectifs et de l'effet d'une partie imaginaire non-nulle de la self-energie, l'origine de l'echelle d'energie des fluctuations magnetiques est examinee

  2. Contribution of Gaz de France offers to the environmental quality of buildings; Les offres de Gaz de France au service de la qualite environnementale des batiments

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    Cegibat, the information-recommendation agency of Gaz de France for building engineering professionals, has organized this conference meeting to present the contributions of Gaz de France offers in the improvement of the environmental quality of residential and tertiary buildings: environmental quality in France and in Europe, Gaz de France and the 'high environmental quality' (HQE) approach, experience feedback: combined solar-gas systems, examples of realizations. (J.S.)

  3. Natural gas cogeneration in the residential sector; La cogeneration au gaz naturel en residentiel

    Energy Technology Data Exchange (ETDEWEB)

    Lancelot, C.; Gaudin, S. [Gaz de France, GDF, Dir. de la Recherche, 75 - Paris (France)

    2000-07-01

    The natural gas cogeneration offer is now available and operational in the industrial sector. It is based on technologies of piston engines and gas turbines. Currently, this offer is sufficiently diversified, so much from the point of view of the range of powers available (from 1 MW to more than 40 MW electric) that number of manufacturers. In order to widen the cogeneration market in France to the markets of the commercial and residential sectors, Gaz De France has undertaken a technical economic study to validate the potential of those markets. This study led to work on the assembly of a french die to cogeneration packages of low power (less than 1 MW electric). This step has emerged at the beginning of 1999 with the launching of a commercial offer of cogeneration packages. In margin to this work Gaz De France Research division also initiated a study in order to evaluate the offer of micro cogeneration, products delivering an electric output lower than 10 kW. (authors)

  4. The compatibility of chromium-aluminium steels with high pressure carbon dioxid at intermediate- temperatures; Compatibilite des aciers au chrome-aluminium avec le gaz carbonique sous pression aux temperatures moyennes

    Energy Technology Data Exchange (ETDEWEB)

    Leclercq, D; Loriers, H; David, R; Darras, E [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    With a view to their use in the exchangers of nuclear reactors of the graphite-gas or heavy water-gas types, the behaviour of chromium-aluminium steels containing up to 7 per cent chromium and 1.5 per cent aluminium has been studied in the presence of high-pressure carbon dioxide at temperatures of between 400 and 700 deg. C. The two most interesting grades of steel (2 per cent Cr - 0.35 per cent Al - 0.35 per cent Mo and 7 per cent Cr - 1.5 per cent Al - 0.6 per cent Si) are still compatible with carbon dioxide up to 550 and 600 deg. C respectively. A hot dip aluminised coating considerably increases resistance to oxidation of the first grade and should make possible its use up to temperatures of at least 600 deg. C. (authors) [French] Dans l'optique de leur emploi dans les echangeurs de reacteurs nucleaires des filieres graphite-gaz ou eau lourde-gaz, le comportement en presence de gaz carbonique sous pression d'aciers au chrome-aluminium, contenant jusqu'a 7 pour cent de chrome et 1,5 pour cent d'aluminium a ete etudie entre 400 et 700 deg. C. Les deux nuances les plus interessantes (2 pour cent Cr - 0,35 pour cent Al - 0,35 pour cent Mo et 7 pour cent Cr - 1,5 pour cent Al - 0,6 pour cent Si) restent compatibles avec le gaz carbonique jusqu'a 550 et 600 deg. C respectivement. Un revetement d'aluminium, effectue par immersion dans un bain fondu, ameliore notablement la resistance a l'oxydation de la premiere et doit permettre son empioi jusqu'a 600 deg. C au moins. (auteurs)

  5. Measurement of the activity of beta emitting gases using an ionisation chamber; Mesure de l'activite des gaz emetteurs beta au moyen d'une chambre d'ionisation

    Energy Technology Data Exchange (ETDEWEB)

    Lebouleux, P [Commissariat a l' Energie Atomique. Centre d' Etudes Nucleaires de Saclay, 91 - Gif-sur-Yvette (France)

    1962-07-01

    An ionization chamber was developed for measuring directly the activity of a {beta}-emitting gas whatever the gas may be. The following two parameters are defined and determined: p, the average specific ionization produced by a {beta} disintegration, and i, the average {beta} path in the chamber. It was shown, during the determination of i, that the {beta} particles are reflected on the walls of the ionization chamber when the latter are made of a high atomic number material. It was possible to eliminate this effect by constructing an electrode chamber made of graphite. With this chamber a direct measurement can be made of the activity of a gaseous {beta} emitter with a precision of about {+-}10%. Some applications are given of the graphite electrode chamber (calibration of the chambers built industrially and determination of the activation cross section of a gaseous emitter). It was possible to determine the activation cross section of {sup 134}Xe; a value of 0.18 {+-} 0.03 barn was found. (author) [French] Le but de l'etude est de realiser une chambre d'ionisation permettant d'effectuer une mesure directe de l'activite d'un gaz emetteur {beta} quel que soit l'emetteur considere. On definit et l'on determine les deux parametres suivants: p: ionisation specifique moyenne produite par une desintegration {beta}. La determination est effectuee par une methode graphique, i: moyenne des parcours des {beta} dans la chambre. La determination est effectuee experimentalement par introduction dans la chambre d'un gaz radioactif dont on peut calculer l'activite. On a mis en evidence, au cours de la determination de i, la reflexion des particules {beta} sur les parois des chambres d'ionisation lorsque celles-ci sont constituees d'un materiau de numero atomique eleve. La construction d'une chambre a electrodes de graphite nous a permis d'eliminer ce phenomene. Avec cette chambre, on effectue une mesure directe de l'activite d'un emetteur {beta} gazeux avec une precision de l

  6. Study of the consequences of the rupture of a pressure tube in the tank of a gas-cooled, heavy-water moderated reactor; Etude des consequences de la rupture d'un tube de force dans la cuve d'un reacteur modere a l'eau lourde et refroidi au gaz

    Energy Technology Data Exchange (ETDEWEB)

    Hareux, F; Roche, R; Vrillon, B [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    Bursting of a pressure tube in the tank of a heavy water moderated-gas cooled reactor is an accident which has been studied experimentally about EL-4. A first test (scale 1) having shown that the burst of a tube does not cause the rupture of adjacent tubes, tests on the tank resistance have been undertaken with a very reduced scale model (1 to 10). It has been found that the tank can endure many bursts of tube without any important deformation. Transient pressure in the tank is an oscillatory weakened wave, the maximum of which (pressure peak) has been the object of a particular experimental study. It appears that the most important parameters which affect the pressure peak are; the pressure of the gas included in the bursting pressure tube, the volume of this gas, the mass of air included in the tank and the nature of the gas. A general method to calculate the pressure peak value in reactor tanks has been elaborated by direct application of experimental data. (authors) [French] L'eclatement d'un tube de force dans la cuve d'un reacteur de puissance modere a l'eau lourde et refroidi par un gaz sous pression est un accident qui a ete etudie experimentalement a propos d'EL-4. Un premier essai a l'echelle 1 ayant montre que l'eclatement d'un tube ne provoque pas celui des tubes voisins, des essais relatifs a la tenue de la cuve ont ete effectues sur maquettes a echelle tres reduite (l/lO). Il a ete trouve que la cuve peut supporter plusieurs eclatements de tubes sans deformations notables. La pression transitoire dans la cuve a une allure oscillatoire amortie dont le maximum (pression de pic) a fait l'objet d'une etude experimentale detaillee. Il apparait que les parametres essentiels influant sur cette pression sont: la pression du gaz contenu dans le tube de force, le volume du gaz qui participe a l'eclatement, la flexibilite de la cuve, la masse d'air empoisonnee dans la cuve, la nature du gaz explosant. Une methode generale d'estimation des pics de pression dans

  7. Dépollution des gaz d'échappement des moteurs diesel au moyen de pots catalytiques Depolluting Exhaust Gases from Diesel Engines by Catalytic Mufflers

    Directory of Open Access Journals (Sweden)

    Goldenberg E.

    2006-11-01

    Full Text Available On présente dans cet article les résultats d'une première série de recherches sur la dépollution des gaz d'échappement des moteurs diesel au moyen de pots catalytiques. L'efficacité des catalyseurs à base de platine pour l'oxydation du monoxyde de carbone et des hydrocarbures imbrûlés a pu être établie par des essais sur banc moteur et sur véhicule. L'emploi de certaines phases actives à base de métaux non nobles permet d'autre part d'abaisser la température de début d'oxydation des particules de suie de 380 à 250 °C environ, avec, entre 250 et 350 °C, élimination de 15 à 20 % des produits piégés. L'essai de divers media filtrants a mis en évidence l'importance des phénomènes d'adsorption des revêtements en alumine et a orienté la recherche vers de nouveaux supports pour filtres catalytiques. This article describes the results of a first series of research on the depollution of exhaust gases from diesel engines by catalytic mufflers. The effectiveness of platinum-base catalysts for the oxidation of carbon monoxide and unburned hydrocarbons was determined by test on an engine test bed and on vehicles on the road. The use of some active non-noble metal phases reduced on the other hand the starting oxidation temperature of soot particulates from 380°C to about 250°C, eliminating 15 to 20% of the trapped products between 250 and 350° C. Tests of different filtering media revealed the importance of adsorption phenomena on alumina coatings and directed research toward new supports for catalytic filters.

  8. Natural gas air conditioning in the tertiary sector. Ambitions, realizations and tools; Climatisation au gaz naturel dans le tertiaire. Ambitions, realisations et outils

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-04-01

    This meeting, organized by the research center of Gaz de France (Cegibat), makes a status of the market of natural gas air conditioning in office and public buildings: experience feedback, improvements of the technology, available tools. After a brief presentation of the status and perspectives of this market in France, the representatives of different companies involved in the fitting of natural gas air conditioning systems present their point of view about this technology. A last part presents the 'climogaz.com' tool launched by Gaz de France. It consists in a web site devoted to the share of knowledge and experience about this technology between professionals and applied to hotels, swimming pools, office buildings, food trade and other trades. (J.S.)

  9. Au Based Nanocomposites Towards Plasmonic Applications

    Science.gov (United States)

    Panniello, A.; Curri, M. L.; Placido, T.; Reboud, V.; Kehagias, N.; Sotomayor Torres, C. M.; Mecerreyes, D.; Agostiano, A.; Striccoli, M.

    2010-06-01

    Incorporation of nano-sized metals in polymers can transfer their unique features to the host matrix, providing nanocomposite materials with improved optical, electric, magnetic and mechanical properties. In this work, colloidal Au nanorods have been incorporated into PMMA based random co-polymer, properly functionalized with amino groups and the optical and morphological properties of the resulting nanocomposite have been investigated by spectroscopic and AFM measurements. Au nanorods have demonstrated to preserve the plasmon absorption and to retain morphological features upon the incorporation, thus making the final metal modified polymer composite exploitable for the fabrication of plasmonic devices. The prepared nanocomposites have been then patterned by Nano Imprint Lithography technique in order to demonstrate the viability of the materials towards optical applications.

  10. Natural gas news; Gaz actualites

    Energy Technology Data Exchange (ETDEWEB)

    Anon,

    1998-12-01

    This brochure is a compilation of practical information concerning the Gaz de France group: organization chart, daughter companies, services, economical activity, natural gas market, trade, regulations etc. A list of partners, directions, centres, groups, associations and other various organisms in relation with Gaz de France company is given. (J.S.)

  11. Les frameworks au coeur des applications web

    OpenAIRE

    Moro, Arielle; Daehne, Peter

    2010-01-01

    Depuis quelques années, Internet est vraiment entré dans les mœurs : tant dans les entreprises qu’au sein de chaque foyer. En effet, Internet permet de communiquer à travers le monde en quelques secondes, de vendre toute sorte de produits en déployant des solutions e-commerce facilement et bien d’autres choses. Internet est donc un véritable vecteur de communication, de commerce et à présent, avec le Web 2.0, un vrai berceau d’informations (tant des informations personnelles que des informati...

  12. Ordered Au Nanodisk and Nanohole Arrays: Fabrication and Applications

    KAUST Repository

    Zheng, Yue Bing; Juluri, Bala Krishna; Kiraly, Brian; Huang, Tony Jun

    2010-01-01

    We have utilized nanosphere lithography (NSL) to fabricate ordered Au nanodisk and nanohole arrays on substrates and have studied the localized surface plasmon resonance (LSPR) of the arrays. Through these investigations, we demonstrate that the angle- dependent behavior of the LSPR in the Au nanodisk arrays enables real-time observation of exciton-plasmon couplings. In addition, we show that the NSL-fabricated Au nanohole arrays can be applied as templates for patterning micro-/nanoparticles under capillary force. The unique structural and plasmonic characteristics of the Au nanodisk and nano- hole arrays, as well as the low-cost and high-throughput NSL-based nanofabrication technique, render these arrays excellent platforms for numerous engineering applications. © 2010 by ASME.

  13. Low intensity natural gas infrared in sports centres; L'infrarouge a basse intensite au gaz naturel dans les centres sportifs

    Energy Technology Data Exchange (ETDEWEB)

    Lajoie, S. [Gaz Metropolitain, Montreal, PQ (Canada)

    2002-09-30

    Infrared devices are being employed more and more for heating buildings. They were traditionally used to heat large spaces higher than 3 metres, such as aviation hangars and industrial buildings. Natural gas infrared devices have found other applications, namely in sports centres, due in large part to the energy efficiency and the resulting comfort. There are three types of infrared devices: low intensity or low intensity tubes, high intensity, and catalytic infrared. Each type of device possesses specific characteristics and applications. For example, infrared tubes are used to uniformly heat a specific area. High intensity devices possess a more intense heat and concentrated in a confined space. Catalytic devices do not have flames, and they can be used in industrial drying processes and thermoforming. In the case of skating rinks, the use of low intensity natural gas infrared tubes is ideal. They reduce the crossed effects of ice cooling load and the spectators need for heat. This is due to infrared acting more on mass (spectators and bleachers) than ambient air. The author described the situation at the Val d'Or arena, Quebec where an energy saving project was initiated two years ago, involving the installation for one of the ice surfaces, of movement sensors to turn off infrared tubes when the rink is unoccupied. The payback period for such equipment is short. The case of the Soccerplex at Lachine, part of the larger City of Montreal, was also discussed. This sports centre comprises indoor soccer fields with 30 foot-high ceilings and large area covering 66,000 square feet (3 soccer fields). Once again, low intensity natural gas infrared tubes were installed and have proved successful.

  14. Gaz de France. Operation note

    International Nuclear Information System (INIS)

    2003-01-01

    This note was published for the public at the occasion of the admission to Euronext's Eurolist of the existing shares that make the capital of Gaz de France company, the French gas utility. The note gives some informations about Gaz de France activity, and about its strategy of development in the European gas market. Then it describes the offer relative to the opening of Gaz de France capital. Some selected financial data and some precision about the risk factors and the management of the company complete the document. (J.S.)

  15. and Au nanoparticles for SERS applications

    Directory of Open Access Journals (Sweden)

    Fazio Enza

    2018-01-01

    Full Text Available The morphological and optical properties of noble metal nanoparticles prepared by picosecond laser generated plasmas in water were investigated. First, the ablation efficiency was maximized searching the optimal focusing conditions. The nanoparticle size, measured by Scanning Transmission Electron Microscopy, strongly depends on the laser fluence, keeping fixed the other deposition parameters such as the target to scanner objective distance and laser repetition frequency. STEM images indicate narrow gradients of NP sizes. Hence the optimization of ablation parameters favours a fine tuning of nanoparticles. UV-Visible spectroscopy helped to determine the appropriate laser wavelength to resonantly excite the localized surface plasmon to carry out Surface Enhanced Raman Scattering (SERS measurements. The SERS activity of Ag and Au substrates, obtained spraying the colloids synthesized in water, was tested using crystal violet as a probe molecule. The good SERS performance, observed at excitation wavelength 785 nm, is attributed to aggregation phenomena of nanoparticles sprayed on the support.

  16. Gaz de France. Source document

    International Nuclear Information System (INIS)

    2005-01-01

    This document was issued by Gaz de France, the French gas utility, at the occasion of the opening of the capital of the company. It is intended to shareholders and presents some informations relative to the stocks admitted to Euronext's Eurolist, some general informations about the company and its capital, some informations about the activities of Gaz de France group, about its financial situation and results, about its management, and about its recent evolution and future perspectives. (J.S.)

  17. Economical and geopolitical aspects bond to the foreseen development of the natural gas in an open market; Aspects economiques et geopolitiques lies au developpement prevu du gaz naturel dans un marche ouvert

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-12-15

    For the first time in 2000, the part of natural gas is equal to those of coal in the world energy accounting. The economy and the geo-policy of this developing energy is analyzed, showing an economy dominated by the transport costs, the specificity of the european sector and the opening market since 1980. The european market opening incertitudes and opportunities are detailed. In conclusion the Gaz De France role in the european energy pole and the new regulations are discussed. (A.L.B.)

  18. Risk Analysis of Flare Flame-out Condition in a Gas Process Facility Analyse des risques des conditions d’extinction de torche au sein d’une installation de traitement de gaz

    Directory of Open Access Journals (Sweden)

    Zadakbar O.

    2011-02-01

    Full Text Available Flaring is a common method of disposal of flammable waste gases in the downstream industries. Flare flame out (flame lift-off or blow-outs often occurs causing toxic vapors to discharge. The toxic gases released may have hazardous effects on the surrounding environment. To study the effect of inhalation exposure of these toxic gases on human health, the four steps of the EPA (Environmental Protection Agency framework with the field data to quantify the cancer and non-cancer health risks are integrated in this paper. As a part of exposure assessment, gas dispersion modeling using AERMOD and UDM-PHAST is applied in two different conditions of normal flaring and flare flame out during a particular climate condition in Khangiran region. Recommendations to avoid flare flame out conditions are also presented here. Le torchage est un procédé courant d’élimination des gaz résiduaires inflammables dans les industries de traitement. L’extinction de la torche (par décollage ou soufflage de flamme provoque souvent une émission de vapeurs toxiques. Ces gaz toxiques libérés peuvent présenter des effets dangereux sur le milieu environnant. Pour étudier l’effet d’une exposition par inhalation de ces gaz toxiques sur la santé, cet article croise les quatre étapes de la démarche de l’EPA (Environmental Protection Agency, Agence de protection de l’environnement avec les données d’exploitation afin de quantifier le risque sanitaire cancérologique et non cancérologique. Dans le cadre de l’estimation d’exposition, une modélisation de dispersion des gaz utilisant AERMOD et UDM-PHAST est évaluée dans deux configurations différentes de torchage normal et d’extinction de torche à l’occasion de conditions climatiques particulières dans la région du Khangiran. L’article propose également des recommandations destinées à éviter les conditions d’une extinction de flamme de torche.

  19. Project of law relative to the electricity and gas public utilities and to the power and gas companies; Projet de loi relatif au service public de l'electricite et du gaz et aux entreprises electriques et gazieres

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    This document is the definitive text of this project of law adopted by the French house of commons. The aim of this law is to allow the administrations to avoid to use their eligibility right with the opening of the electricity and gas markets to competition. It changes the juridical status of the two public utilities Electricite de France (EdF) and Gaz de France (GdF) into two anonymous companies and creates two additional companies for the management of the power and gas networks. It ensures also the transposition of the European directives from June 26, 2003 (2003/54/CE and 2003/55/CE). It contains some proper dispositions and modifies various existing French laws, in particular the law no. 46-628 from April 8, 1946 about the electricity and gas nationalization and the law no. 2000-108 from February 10, 2000 relative to the modernization and development of the electric public utility. (J.S.)

  20. TiAu-based micro-calorimeters for space applications

    International Nuclear Information System (INIS)

    Dirks, B.P.F.; Popescu, M.; Bruijn, M.; Gottardi, L.; Hoevers, H.F.C.; Korte, P.A.J. de; Kuur, J. van der; Ridder, M.; Takei, Y.

    2009-01-01

    We present the latest results of the performance of micro-calorimeters based on transition edge sensors (TESs) for space applications. Sensors based on TiAu superconductive layers with Cu/Bi absorbers are discussed and have been characterized. Different coupling schemes between absorber and TES have been tested leading to an optimal (preferred) design for a new batch of arrays. We discuss the progress on array development for the International X-ray Observatory (IXO) in terms of pixel uniformity and filling factor. Inter-pixel cross-talk is discussed as well.

  1. Measurements and Application of Partition Coefficients of Compounds Suitable for Tracing Gas Injected Into Oil Reservoirs Mesures et applications des coefficients de partage de composants utilisables comme gaz traceurs injectés dans des réservoirs de pétrole

    Directory of Open Access Journals (Sweden)

    Dugstad O.

    2006-11-01

    Full Text Available Tracing of injection gas in oil reservoirs is a technique used to improve the description of permeability distributions in situ. Results from dynamic laboratory experiments of gas tracers are reported. Gas tracers are delayed when flooding through a reservoir by the partitioning into the oil phase. A knowledge of this effect is important to optimize the interpretation of field tracer tests. The partition is quantified by the partition coefficient K. Two chemical tracers perfluoromethylcyclopentane (PMCP and perfluoromethylcyclohexane (PMCH and the radioactive 14C labelled ethane have been studied here. The two chemical compounds are new as reservoir tracers and no field results with these tracers are reported in the open literature. Our group has, however, recently applied these compound successfully as tracers in a North Sea reservoir. Les traceurs représentent un outil précieux pour améliorer la description des gisements. On les a utilisés pour obtenir des renseignements sur la configuration de l'écoulement des fluides injectés et sur leur vitesse, sur l'instant de percé des venues d'eau et sur leur origine précise, sur les traitements d'amélioration du balayage, sur les hétérogénéités importantes telles que fractures, barrières d'écoulement et stratifications de la perméabilité. Dans les gisements importants comportant plusieurs puits de production et plusieurs puits d'injection, il est donc souhaitable de disposer de plusieurs traceurs afin de pouvoir injecter différents traceurs ou mélanges de traceurs dans les différents puits. L'article présenté ici est une contribution a l'effort fait pour étendre le nombre de gaz traceurs fiables applicables aux gisements. L'article présente les résultats d'essais dynamiques en laboratoires dans lesquels on injecte des traceurs à travers un milieu poreux. Lorsqu'ils traversent un réservoir, les gaz traceurs sont retardés du fait de leur ségrégation dans la phase huile. La

  2. Improvement of heat transfer to gases by mean of electric fields (1962); Etude de l'amelioration des echanges de chaleur dans les gaz au moyen de champs electriques (1962)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1962-07-01

    The effects of electric fields on heat transfer to the following gases: air, argon, nitrogen, carbon dioxyde, helium, hydrogen, were studied in an annular channel, the inner part of which is the heating element. Experiments were made both in free convection and forced convection, the latter case with and without an external source of ionisation. Two causes of improvement of heat transfer were found: electro-convection and ionic convection; the influence of various parameters (electric fields, current of ionisation, temperatures, pressures, flow rate, etc...) is also investigated. Increasing of exchanged power was measured: in free convection this increasing reached 400 per cent and, in forced convection, it was found to be mainly dependent on stream velocity, decreasing from 300 per cent at Re = 6000 to few per cent for Re {>=} 30000 for a given gas pressure. Experiments in pile have shown that the use of an external source of ionisation allowed to obtain the same order of improvement as above but with a voltage much lower. This fact would make easier the use of this process of heat transfer in a channel of a reactor. (authors) [French] On a etudie l'action du champ electrique sur les echanges de chaleur dans les gaz suivants: air, argon, azote, anhydride carbonique, helium, hydrogene, avec un element chauffant cylindrique dans un canal concentrique. Des experiences ont ete effectuees en convection libre et en convection forcee en l'absence et en presence d'une source exterieure d'ionisation. On a distingue deux sortes de mecanismes d'accroissement des echanges, l'un d'electroconvection proprement dite et l'autre de convection ionique, et on precise l'influence des divers parametres (champ electrique, courant d'ionisation, temperature, pression, debit, etc...). On a pu chiffrer les ordres de grandeur des accroissements d'echanges observes qui, en convection libre, atteignent 300 a 400 pour cent et, en convection forcee, dependent beaucoup de la vitesse d

  3. Possibilities of gas-phase radio-chromatography application to permanent-gas analysis; Possibilites de la radiochromatographie en phase gazeuse applications a l'analyse des gaz permanents

    Energy Technology Data Exchange (ETDEWEB)

    Dupuis, M C; Charrier, G; Alba, C; Massimino, D [Commissariat a l' Energie Atomique, Bruyeres-le-Chatel (France). Centre d' Etudes

    1970-07-01

    The gas-phase radio-chromatography technique has been applied to the rapid analysis of permanent gases (H{sub 2}, O{sub 2}, N{sub 2}, A, Kr, Xe, CO, CH{sub 4}) labelled with radioactive indicators ({sup 3}H, {sup 37}A, {sup 85}Kr, {sup 133}Xe). After calibration, the components of such a mixture can be identified and their concentrations measured in less than two hours, using a sample volume of from 0.1 to 10 cm{sup 3}. The minimum detectable activity is of the order of 10{sup -4} {mu}C for each radioactive isotope. The measurements are reproducible to about 2 to 3 per cent. This work has been mainly concerned with the influence of parameters affecting the response of the radioactivity detector (ionization chamber or gas flow proportional counter). The method has very numerous applications both theoretically, for the study of chromatographic phenomena under ideal conditions (infinitesimal concentrations made possible by the use of radioactive tracers), and practically, for rapid and accurate radiochemical analysis of radioactive gas mixtures. (authors) [French] La technique de radiochromatographie en phase gazeuse est appliquee a l'analyse rapide de gaz permanents (H{sub 2}, O{sub 2}, N{sub 2}, A, Kr, Xe, CO, CH{sub 4}) marques par des indicateurs radioactifs ({sup 3}H, {sup 37}A, {sup 85}Kr, {sup 133}Xe). Apres etalonnage, l'identification et la mesure des concentrations des constituants d'un tel melange requierent moins de deux heures, sur un volume d'echantillon de 0.1 a 10 cm{sup 3}. L'activite minimum detectable est de l'ordre de 10{sup -4} {mu}C pour chaque isotope radioactif. La reproductibilite des mesures est de l'ordre de 2 a 3 pour cent. L'etude porte principalement sur l'influence des parametres affectant la reponse du detecteur de radioactivite (chambre d'ionisation, ou compteur proportionnel a circulation). La methode est extremement fertile en applications tant sur le plan theorique pour l'etude du phenomene chromatographique dans les conditions

  4. Possibilities of gas-phase radio-chromatography application to permanent-gas analysis; Possibilites de la radiochromatographie en phase gazeuse applications a l'analyse des gaz permanents

    Energy Technology Data Exchange (ETDEWEB)

    Dupuis, M.C.; Charrier, G.; Alba, C.; Massimino, D. [Commissariat a l' Energie Atomique, Bruyeres-le-Chatel (France). Centre d' Etudes

    1970-07-01

    The gas-phase radio-chromatography technique has been applied to the rapid analysis of permanent gases (H{sub 2}, O{sub 2}, N{sub 2}, A, Kr, Xe, CO, CH{sub 4}) labelled with radioactive indicators ({sup 3}H, {sup 37}A, {sup 85}Kr, {sup 133}Xe). After calibration, the components of such a mixture can be identified and their concentrations measured in less than two hours, using a sample volume of from 0.1 to 10 cm{sup 3}. The minimum detectable activity is of the order of 10{sup -4} {mu}C for each radioactive isotope. The measurements are reproducible to about 2 to 3 per cent. This work has been mainly concerned with the influence of parameters affecting the response of the radioactivity detector (ionization chamber or gas flow proportional counter). The method has very numerous applications both theoretically, for the study of chromatographic phenomena under ideal conditions (infinitesimal concentrations made possible by the use of radioactive tracers), and practically, for rapid and accurate radiochemical analysis of radioactive gas mixtures. (authors) [French] La technique de radiochromatographie en phase gazeuse est appliquee a l'analyse rapide de gaz permanents (H{sub 2}, O{sub 2}, N{sub 2}, A, Kr, Xe, CO, CH{sub 4}) marques par des indicateurs radioactifs ({sup 3}H, {sup 37}A, {sup 85}Kr, {sup 133}Xe). Apres etalonnage, l'identification et la mesure des concentrations des constituants d'un tel melange requierent moins de deux heures, sur un volume d'echantillon de 0.1 a 10 cm{sup 3}. L'activite minimum detectable est de l'ordre de 10{sup -4} {mu}C pour chaque isotope radioactif. La reproductibilite des mesures est de l'ordre de 2 a 3 pour cent. L'etude porte principalement sur l'influence des parametres affectant la reponse du detecteur de radioactivite (chambre d'ionisation, ou compteur proportionnel a circulation). La methode est extremement fertile en applications tant sur le plan theorique pour l

  5. TiAu based shape memory alloys for high temperature applications

    International Nuclear Information System (INIS)

    Wadood, Abdul; Yamabe-Mitarai, Yoko; Hosoda, Hideki

    2014-01-01

    TiAu (equiatomic) exhibits phase transformaion from B2 (ordered bcc) to thermo-elastic orthorhombic B19 martensite at about 875K and thus TiAu is categorized as high temperature shape memory alloy. In this study, recent research and developments related to TiAu based high temperature shape memory alloys will be discussed in the Introduction part. Then some results of our research group related to strengthening of TiAu based high temperature shape memory alloys will be presented. Potential of TiAu based shape memory alloys for high temperature shape memory materials applications will also be discussed

  6. Contribution to the study of can deformations in the fuel elements of gas-graphite reactors during thermal cycling; Contribution a l'etude des deformations des gaines des elements combustibles de reacteur graphite-gaz au cours du cyclage thermique

    Energy Technology Data Exchange (ETDEWEB)

    Gauthron, M; Boudouresques, B; Delpeyroux, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    The cans of fuel cartridges used in reactors of the gas-graphite type have either longitudinal fins of variable thickness, short herring-bone fins, or else a mixture of the two. An important test of the strength of these cartridges is their behaviour during thermal cycling carried out in cells reproducing in-pile conditions. It has been observed during with rapid cooling that there occurs a shortening at the base of the fins which can be accompanied in particular by a compression effect at the fin type, which has a tendency to curl, and by a tractive force acting on the body of the can at the ends of the longitudinal fins; this last phenomenon can result in a fracturing of the welds at the extremities or of the ends of the cartridge. This report presents first of all the way in which the stress diagram can be drawn for a can touching the fuel, and then the effect of the ratchet along a fin fixed to a bar with or without grooves. Finally the importance is shown of the test cycling variables (temperature, heating and cooling rates). (authors) [French] Les gaines des cartouches combustibles des reacteurs de la filiere graphite-gaz comportent soit des ailettes longitudinales plus ou moins epaisses, soit de courtes ailettes a chevrons, soit un ensemble des deux. Un test important de la tenue des cartouches, est la tenue au cyclage thermique en cellule pour reproduire le comportement en pile. On a observe au cours des cyclages a refroidissement rapide, un raccourcissement a la base des ailettes qui peut s'accompagner notamment d'une mise en compression du sommet de l'ailette qui a tendance a friser, et d'une traction exercee sur le corps des gaines au bout des ailettes longitudinales; ce dernier phenomene peut se traduire par des ruptures de soudures d'extremites ou des parties terminales de la cartouche. Ce rapport presente d'abord la maniere dont peut etre trace le diagramme des contraintes dans une gaine liee au combustible, puis l'effet du rochet le long d

  7. Compatibility of various magnesium alloys with pressurized carbon dioxide at high temperatures; Compatibilite de divers alliages de magnesium avec le gaz carbonique sous pression aux temperatures elevees

    Energy Technology Data Exchange (ETDEWEB)

    Dewanckel, B; David, R; Hulin, C; Leclercq, D [Commissariat a l' Energie Atomique, 38 - Grenoble (France). Centre d' Etudes Nucleaires

    1968-07-01

    This work on the compatibility of magnesium alloys with pressurized carbon dioxide has been carried out along three lines: - testing of special alloys containing additions of zirconium, manganese, cerium, zinc, beryllium and yttrium. The results are satisfactory, generally speaking, and the corrosion kinetics are often comparable to those of conventional magnesium-zirconium alloy; - influence of the quality of the carbon dioxide, in particular the presence of water vapour or of carbon monoxide in this gas. It appears that oxidation is reduced if the carbon dioxide contains traces of water vapour, but is more pronounced if carbon monoxide is also present; - study of certain phenomena related to corrosion: size changes in the samples during tests, structural modifications in the alloys (grain-size changes, formation of a cortical zone in the case of alloys containing zirconium). The influence of thermal cycling has also been studied in a few specific tests. The results obtained make it possible to compare the behaviour of various alloys under varying conditions of long-term use, and to choose, if required, the best composition for a given application. (authors) [French] Ce travail sur la compatibilite des alliages de magnesium avec le gaz carbonique sous pression a ete particulierement oriente dans trois directions: - epreuve, d'alliages speciaux comportant des additions de zirconium, manganese, cerium, zinc, beryllium et yttrium. Les resultats sont generalement satisfaisants et les cinetiques de corrosion souvent comparables a celles de l'alliage magnesium-zirconium classique; - influence de la qualite du gaz carbonique, et notamment de la presence de vapeur d'eau ou d'oxyde de carbone dans ce gaz. Il est apparu que l'oxydation est reduite si le gaz carbonique contient des traces d'eau, mais accrue si l'oxyde de carbone est egalement present; - etude de certains phenomenes lies a la corrosion: variations dimensionnelles des echantillons au cours des essais

  8. Plasmas pour valorisation totale ou partielle des gaz contenant de l'H2S Plasmas for Total Or Partial Upgrading of H2s Containing Gases

    Directory of Open Access Journals (Sweden)

    Czernichowski A.

    2006-12-01

    Full Text Available Des procédés par plasmas alternatifs au procédé Claus sont proposés pour produire de l'hydrogène et récupérer du soufre à partir des gaz contenant une forte teneur en H2S. Quand la teneur en H2S est moins importante, des techniques plasma peuvent également être utiles pour assister certains étages du procédé classique Claus ou réaliser ce procédé pour des gaz non conventionnels. Les tests allant jusqu'à l'échelle industrielle sont menés dans divers réacteurs à plasmas et les résultats encourageants rapportés de la littérature et de la recherche propre laissent envisager des prochaines applications. Plasma assisted processes are proposed to act as an alternative to the Claus process in order to recover hydrogen and sulphur from high H2S gases. For less concentrated gases plasma techniques may also be inserted into classical Claus plant or may allow treatment of non conventional gases. Up to industrial scale tests are performed using different plasma reactors. The literature-based results as well as our own ones make the future applications quite optimistic.

  9. CO{sub 2} direct cycles suitable for AGR type reactors; Cycles directs de gaz carbonique applicables aux reacteurs du genre AGR

    Energy Technology Data Exchange (ETDEWEB)

    Maillet, E [Commissariat a l' Energie Atomique. Centre d' Etudes Nucleaires de Saclay, 91 - Gif-sur-Yvette (France)

    1967-10-01

    The perspectives given by the gas turbines under pressure, to build simple nuclear power plants and acieving significantly high yield, are specified. The CO{sub 2} is characterised by by good efficiency under moderate temperature (500 to 750 Celsius degrees), compactness and the simpleness of machines and the safe exploitation (supply, storage, relief cooling, thermosyphon). The revision of thermal properties of the CO{sub 2} and loss elements show that several direct cycles would fit in particular to the AGR type reactors. Cycles that would diverge a little from classical models and able to lead to power and heat generation can lead by simple means to the best results. Several satisfying solutions present for the starting up, the power regulation and the stopping. The nuclear power plant components and the functioning safety are equally considered in the present report. The conclusions stimulate the studies and realizations of carbon dioxide gas turbines in when approprite. [French] Les perspectives offertes par la turbine a gaz sous pression, pour construire des centrales nucleaires simples et de rendement progressivement eleve, se precisent actuellement. le CO{sub 2} se distingue par sa bonne efficacite a temperature moderee (500 a 750 degres celsius), la compacite et la simplicite des machines, et la surete qu'il apporte a l'exploitation ( approvisionnement, stockage, refroidissement de secours, thermosiphon). La revision des proprietes thermophysiques du CO{sub 2} et des elements de pertes montre que divers cycles directs conviendraient en particulier aux reacteurs agr ou derives. Des cycles s'ecartant peu des modeles classiques, et se pretant ulterieurement a la production simultanee d'electricite et de chaleur, peuvent conduire par des moyens simples aux meilleurs resultats d'ensemble. Plusieurs solutions satisfaisantes se presentent pour le demarrage, le reglage de la puissance et l'arret. Les composants de la centrale et la surete de fonctionnement sont

  10. Contribution to the dosimetry of tritium in the presence of inactive or active gases; Contribution a la dosimetrie du tritium en presence de gaz inactifs ou actifs

    Energy Technology Data Exchange (ETDEWEB)

    Soudain, G [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1966-07-01

    Tritium is a dangerous gas for man and the maximum admissible doses in the atmosphere are sufficiently low for the dosage to be fairly difficult. We have developed an apparatus for measuring selectively the contamination of air by this gas when it is alone or when it is associated with other gaseous contaminants. The differential apparatus using two ionization chambers makes it possible to eliminate a parasitic {gamma} radiation field. In a few particular cases, the presence of the radio-active gas has been studied. From the practical point of view, the use of these chambers made of stainless steel makes for easier use since the problems connected with wall adsorption have been satisfactorily resolved. The method can be applied without restriction and very easily to the dosage of traces tritium in air or in the form of tritiated water or tritiated steam in the atmosphere. (author) [French] Le tritium est un gaz dangereux pour l'homme et les concentrations maximales admissibles dans l'atmosphere sont suffisamment basses pour que le dosage soit delicat. Nous avons etudie et realise un appareil qui permet de mesurer selectivement la contamination de l'air par ce gaz lorsqu'il est seul ou lorsqu'il est associe a d'autres agents gazeux contaminants. Le montage differentiel a deux chambres d'ionisation permet d'eliminer un champ de rayonnement {beta} parasite. Dans certains cas particuliers, la presence du gaz radioactif a ete etudiee. Sur le plan pratique, l'utilisation des chambres en acier inoxydable facilite les applications car les problemes d'adsorption aux parois ont ete bien resolus. La methode peut s'appliquer sans restriction et tres pratiquement au dosage des traces de tritium dans l'air ou encore sous forme d'eau tritiee ou de vapeur d'eau tritiee dans l'atmosphere. (auteur)

  11. Seminar on the news energy utilization in rural area of April 3 to March 24 , 1980 in Reo, Upper Volta[Energie renouvelable ; Zone rurale ; Gaz biologique ; Energie solaire ; Sechoir solaire]; Seminaire sur l'utilisation des energies nouvelles en zone rurale du 24 mars au3 avril 1980 a Reo, Haute Volta

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1980-04-15

    volume of transport much more reduced. Mastering these new technologies will help fight efficiently against desertification, and fruits and vegetables rotting. [French] L'acces a l'energie par toutes les populations reste une des preoccupations du Gouvernement de Haute Volta (Burkina Faso). C'est ainsi que sous l'egide de la Communaute Economique de l Afrique de l'Ouest (CEAO), de l'Agence Canadienne de Developpement International et du Mouvement Scout, un seminaire sur l'utilisation des energies renouvelables en zone rurale y a ete organise. Il s'agit pour les participants venus de plusieurs pays, d'apprendre a mettre en pratique, l'utilisation des energies nouvelles telles la cuisiniere a feu ferme, le gaz biologique, le chauffe- eau solaire et le sechoir solaire. L'adoption de ces nouvelles sources d'energie par les populations permettrait de pallier les problemes de desertification lies au deboisement intensif dans le pays. Tous les participants a cette rencontre sont donc sensibilises pour qu'ils apportent leur contribution et celle des populations de leurs terroirs respectifs pour une meilleure conservation des ressources naturelles disponibles. Cela passe aussi par la construction de cuisinieres a feu ferme qui permettent d'avoir deux sources d'energie. Ce type de foyer est d'une construction facile et utilisable seulement trois jours apres. Il permet d'eviter la perte d'energie qui caracterisait le foyer traditionnel (pres de 95% de perte d'energie) ; ce qui revient a consommer moins de bois tout en assurant un rendement de l'ordre de 60 a 70%. Il s'est agi pour les participants aux travaux de s'initier a l'installation de gaz suivant des modeles chinois et indien . Ils ont donc ete inities a la realisation des technologies de production de gaz biologique a travers la maitrise du schema de principe du procede de fermentation discontinue. De meme, ils ont acquis le savoir- faire sur les techniques de mise en place du chauffe- eau solaire par insolateur et du

  12. Gaz de France and market regulation

    International Nuclear Information System (INIS)

    Carriere, J.F.; Balard, Th.

    2004-01-01

    Following an overview of the specific features of the European gas sector (characterised by highly concentrated production and increasing levels of production outside Europe and over long distances), the article describes the lead up to the opening of the market place in France. Following the application of the first directive in 2000, Gaz de France has carried out various measures, the aim of which was to achieve immediate efficiency (with the organizational separation of the transport and trading divisions, the separation of activities from an accounting viewpoint and the publication of a transparent TPA tariff as opposed to a discriminatory one). This opening of the gas sector has seen the start of a gradual process based on this experience. In addition to these initial measures, the opening of the gas markets has been subject to a regulatory framework as from January 2003, and the task of regulating the French gas sector has been given to the CRE (Commission de regulation de l'electricite). Thanks to the ongoing dialogue initiated by the latter with all key players in the market, progress has been achieved in various fields related to regulation. Even if this process is not complete, the French example demonstrates that the combined actions of the regulator and the market operators working together in a constructive manner and in stages, makes it possible to successfully introduce a genuinely open market. (authors)

  13. Economic Aspects of Air and Gas Cleaning for Nuclear Energy Processes; Aspects Economiques de l'Epuration de l'Air et des Gaz au Cours des Operations Nucleaires; 042d 041a 041e 041d 041e 0414 0; Aspectos Economicos de la Depuracion del Aire y de los Gases en los Procesos de Obtencion de Energia Nuclear

    Energy Technology Data Exchange (ETDEWEB)

    Silverman, Leslie [Harvard School of Public Health, Boston, MA (United States)

    1960-07-01

    ont des effluents toxiques ou nuisibles, qui doivent egalement faire l'objet d'un controle relativement peu onereux. L'auteur du memoire procede a un examen detaille des facteurs qui interviennent dans le prix d'achat et les frais d'exploitation du materiel d'epuration des gaz; il decrit en outre les divers systemes utilises aux Etats-Unis. On s'est naturellement efforce de resoudre le probleme des effluents gazeux et plusieurs systemes ont ete mis au point a cet effet mais on a en outre mesure, en donnees comparables, leur degre d'efficacite. On est ainsi en mesure de proceder, du point de vue economique, a un examen critique des differentes caracteristiques de fonctionnement en ce qui concerne la consommation d'energie, les depenses relatives a l'adsorption, le cout de l'encombrement, les problemes de corrosion et d'autres aspects du fonctionnement des appareils. En execution d'un contrat conclu avec le Laboratoire d'epuration de l'air de l'Universite d'Harvard, la Commission de l'energie atomique des Etats- Unis a entrepris la realisation d'un programme d'evaluation en collaboration avec les diverses entreprises ou personnes privees auxquelles la Commission a octroye des contrats. Cette etude a deja permis de determiner quels sont les facteurs a prendre en consideration pour dresser un schema des couts et analyser ceux-ci; certaines conclusions preliminaires seront ulterieurement formulees. Le memoire donne en outre un apercu des autres etudes economiques qui ont ete effectuees, aux Etats-Unis, sur certains procedes ou applications particuliers. (author) [Spanish] En este trabajo, el autor enuncia las normas basicas a las que ha de ajustarse el control de los efluentes gaseosos y en forma de particulas en las siguientes esferas: produccion de materiales para reactores, separacion de isotopos, elaboracion de elementos combustibles, recuperacion de combustibles y funcionamiento de reactores. Existen asimismo casos (produccion de berilio y zirconio, por ejemplo) en

  14. Study of the thermal drop at the uranium-can interface for fuel elements in gas-graphite reactors; Etude de la chute thermique au contact uranium-gaine pour des elements combustibles de reacteur de la filiere graphite-gaz

    Energy Technology Data Exchange (ETDEWEB)

    Faussat, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Levenes, G; Michel, M [Societe Industrielle de Combustible Nucleaire (France)

    1964-07-01

    The report reviews the tests now under way at the CEA, for determining the thermal contact resistance at the uranium-can interface for fuel elements used in gas-graphite type reactors. These are laboratory tests carried out with equipment based on the principle of a heat flow across a stack of test pieces having planar contact surfaces. The following points emerge from this work: - for a metallic uranium element canned in magnesium, of the type G-2 or EDF-2, a value of 0.2 deg C/W/cm{sup 2} seems reasonable for can temperatures of 400 deg C and above. - this value is independent of the micro-geometric state of the uranium surface in a range of roughness which easily includes those observed on tubes and rods produced industrially. - for the internal cans of elements cooled internally and externally, the value of the contact resistance for temperatures of under 400 deg C as a function of the stresses in the can has not yet been measured exactly. (authors) [French] Le rapport fait le point des essais actuellement en cours au CEA pour determiner la resistance thermique de contact uranium-gaine pour des reacteurs de la filiere graphite-gaz. Ces essais sont effectues en laboratoire sur des appareils bases sur le principe d'une circulation de flux de chaleur a travers un empilement d'eprouvettes dont les faces en contact sont planes. De l'etude, il ressort essentiellement que: - pour un element a uranium metallique et gaine de magnesium type G-2 ou EdF-2, on peut admettre la valeur de 0,2 deg C/W/cm{sup 2} pour des temperatures de gaines de 400 deg C et plus. - cette valeur ne depend pas de l'etat de surface microgeometrique de l'uranium pour un domaine de rugosites couvrant largement celles que l'on observe sur des tubes et barreaux fabriques en serie. - pour les gaines internes d'elements a refroidissement interne et externe la valeur de la resistance de contact reste a preciser pour les temperatures inferieures a 400 deg C, en fonction des contraintes existant dans les

  15. Applications of the automatic meter reading techniques at the Brazilian gas domestic market; Application des techniques de releve automatique des compteurs sur le marche domestique Bresilien du gaz

    Energy Technology Data Exchange (ETDEWEB)

    Venancio, J.; Monteiro, F. [Comgas, Sao Paulo (Brazil); D' Oliveira, R.D. [ORBIS, Curitiba (Brazil)

    2000-07-01

    This article will describe applications of the automation and automatic meter reading techniques at the internal gas pipes installations design, considering residential and commercial buildings, and taking in account the tendency of rapid growth of the activities related to the natural gas industry in Brazil, as well as the recently development of new technologies that can be applied with affordable prices. It will be analysed the application of an automatic meter reading technology in a building of several floors in Sao Paulo, which gas installations design is being carried up, with be purpose of making a comparative cost-effectiveness study with the traditional constructive methods applied in Brazil. As a result, it will be purposed a new commercialization model for the gas in Brazil at the residential and commercial market. (authors)

  16. Gaz de France. Operation note; Gaz de France. Note d'operation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    This note was published for the public at the occasion of the admission to Euronext's Eurolist of the existing shares that make the capital of Gaz de France company, the French gas utility. The note gives some informations about Gaz de France activity, and about its strategy of development in the European gas market. Then it describes the offer relative to the opening of Gaz de France capital. Some selected financial data and some precision about the risk factors and the management of the company complete the document. (J.S.)

  17. Gaz de France annual report 2003

    International Nuclear Information System (INIS)

    2003-01-01

    Today, Gaz de France Group ranks as one of the largest gas utilities in Europe. This success is the fruit of a growth strategy that fuses economic, social and environmental imperatives. To respond more efficiently to fluctuations in the natural gas market and continue to expand its range of competitive products and services, Gaz de France has committed to integrated development across the full spectrum of natural gas activities, from exploration and production to the sale of energy and related services. As the leading supplier of natural gas in France, Gaz de France has honed a targeted policy to acquire equity interests and assets, mainly in Europe, assuring the Group of a privileged place at the heart of the European gas grid. As European energy markets continue to open more widely to competition, the Group intends to benefit from its presence in all the sectors of the natural gas industry and in the European market to confirm its position as an integrated energy operator, focused on gas, among Europe's leaders. To achieve this goal, Gaz de France will concentrate in a balanced fashion on activities linked to infrastructures and activities related to energy supply and services. While assuming its public service responsibilities, the Group will expand the range of products and services to customers. This activity report presents: consolidated financial highlights, profile, corporate governance, Gaz de France's ambition, panorama of activities: energy supply and services (exploration - production, purchase and sale of energy, services), infrastructures (transmission and storage - France, distribution - France, transmission and distribution - international), Commitments of Gaz de France (human resources, research and development, sustainable development, map of main subsidiaries and affiliates)

  18. Gaz de France. Source document; Gaz de France. Document de base

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    This document was issued by Gaz de France, the French gas utility, at the occasion of the opening of the capital of the company. It is intended to shareholders and presents some informations relative to the stocks admitted to Euronext's Eurolist, some general informations about the company and its capital, some informations about the activities of Gaz de France group, about its financial situation and results, about its management, and about its recent evolution and future perspectives. (J.S.)

  19. Le Gaz Naturel Véhicule Natural Gas for Vehicles

    Directory of Open Access Journals (Sweden)

    De Chauveron S.

    2006-11-01

    Full Text Available Cet article présente le GNV (Gaz Naturel Véhicule. Le GNV a en effet de sérieux atouts, à la fois comme carburant de substitution et comme carburant propre. Ces atouts sont aussi bien économiques que techniques. La première partie est consacrée aux enjeux du développement du GNV. Les premiers pays utilisateurs ont été ceux qui disposent sur leur sol de ressources de gaz naturel. Aujourd'hui, alors que de nombreux pays doivent faire face à l'inquiétude croissante relative à l'augmentation de la pollution urbaine, le gaz naturel apparaît également comme un carburant propre, permettant de réduire rapidement les émissions de polluants des véhicules. Dans une deuxième partie, nous donnons une description technique sommaire des stations GNV et des véhicules GNV. Il s'agit de familiariser le lecteur avec les quelques spécificités techniques du GNV, par rapport à l'essence et au gazole. On constatera d'ailleurs que les technologies GNV sont très proches des technologies classiques. Enfin, la dernière partie est consacrée aux actions en cours, qui permettront le développement du GNV en France et en Europe : programmes de recherche, réduction des coûts de la filière, actions réglementaires, communication, etc. This article presents compressed natural gas for vehicles (CNG, which can provide considerable advantages both as an alternative fuel and as a clean fuel. These assets are not only economic but also technical. The first part deals with what is at stake in developing natural gas as a motor fuel. The first countries to use CNG were those with natural gas resources in their subsoil. Today, with a large number of countries having to cope with growing concern about increasing urban pollution, natural gas is also seen as a clean fuel that can help cut vehicle pollutant emissions dramatically. In the second part a brief technical description is given of CNG stations and vehicles, with the aim of acquainting the reader with

  20. Detection of high energy gamma radiations with liquid rare gases as scintillators; Detection des rayonnements Gamma de grande energie avec les gaz rares liquides comme scintillateurs

    Energy Technology Data Exchange (ETDEWEB)

    Ho, Phan Xuan

    1965-11-25

    This research thesis reports the study of a sensor based on a liquid scintillator for the detection of high energy (10 to 30 MeV) gamma radiations. The scintillator is a liquefied argon or xenon rare gas. The author first studies the process of energy transfer from the particle to the sensing medium. He addresses the different involved elements and phenomena: electromagnetic radiations (Compton Effect, photoelectric effect, pair production, and total gamma absorption), charged particles (braking radiation, collisions) and application to gamma spectrometry. He describes and discusses the scintillation mechanisms (scintillation of organic and inorganic materials), the general characteristics of scintillators (impurities, converters), and then reports the practical realisation of the sensor. Results are presented and discussed [French] Dans ce travail, nous nous proposons d'etudier une technique. Il s'agit d'un detecteur a scintillateur liquide pour la detection des rayonnements gamma energiques (10 a 30 MeV). Le scintillateur utilise est un gaz rare liquefie argon ou xenon. Nous examinerons d'abord les processus de transfert de l'energie de la particule au milieu detecteur puis les mecanismes de scintillation en general pour pouvoir exploiter au mieux les phenomenes favorables. Nous presenterons ensuite la realisation pratique du detecteur. Ses qualites (et defauts) trouveront leur place dans la fin de ce memoire. Bien qu'a l'heure actuelle, par la methode de Kyropoulos, on puisse faire pousser des gros cristaux d'iodure de sodium, l'utilisation des 'gaz rares' liquefies comme scintillateurs est, grace a la brievete de la scintillation, tres utile lorsqu'on recherche un fort taux de comptage (jusqu'a 10 impulsions par seconde) ou lorsqu'on veut resoudre certains problemes de coincidence. Les cristaux NaI(Tl) de grandes dimensions sont d'un montage facile mais leur manipulation requiert beaucoup de precautions du fait qu'ils supportent tres mal les chocs thermiques

  1. Experimental study of the vaporization of a droplets injection in a fluidized gas-solid media; Etude experimentale de la vaporisation d'un jet de goutelettes au contact d'un milieu gaz-solide fluidise

    Energy Technology Data Exchange (ETDEWEB)

    Leclere, K.

    2002-09-01

    The quality of feedstock injection in the Fluid Catalytic Process (FCC) is essential to ensure a good vaporization. The vaporization should be fast so that the cracking reaction in the gaseous phase can happen within the short residence time in the riser (a few seconds). Vaporization is helped by a uniform injection of droplets as small as possible as well as a good mixing with the catalyst particles that represent the main heat source. Several models were developed to predict the droplet vaporization in a gas-solid media. However, no experimental validation exists for these models, whose predictions vary (from 1 to several hundreds of milliseconds). The objective of this study was to get a better understanding of the physical phenomena taking place during droplet vaporization. This was done in two steps. First, operating limits had to be defined to ensure an optimal vaporization and to avoid local saturation and agglomerate formation. These limits were precisely determined under laboratory conditions to validate a model that showed that agglomeration does not occur under industrial conditions. Then, a kinematic study of vaporization under operating conditions without agglomerate formation was performed. An original measurement technique was developed to get samples at very short times (tens of milliseconds). Experiments showed that heat transfer was not limiting and that mass transfer was the limiting process during vaporization. The developed model was thus based on mass transfer through a boundary layer. The validation of this model in a dense fluidized bed justified its application to operating conditions were the bed voidance is higher. A detailed study of operating parameters will help determine how to improve vaporization. (author)

  2. Gaz de France annual report 2001

    International Nuclear Information System (INIS)

    2001-01-01

    One of Europe's leading gas utilities, the Gaz de France Group operates in all sectors of the natural gas industry, from exploration and production to energy distribution and services, to respond to customer demand efficiently and achieve sustained and profitable growth. To this end, the Group is organized in five lines of business: exploration and production, supply and trading, transmission, distribution and services. Active in 33 countries, the Gaz de France Group first targets growth in Europe, its natural environment. The opening of energy markets and its position at the center of Europe's gas grids offers the Group many opportunities in trading, transmission for third parties, distribution and services. Since August 10, 2000, Gaz de France has made it possible for other gas operators to access its transmission system. The Group capitalizes on its expertise at the global level as well, in emerging markets like Mexico and in fields in which it has recognized know-how, such as liquefied natural gas (LNG). To ensure this growth and pursue its penetration of European and world markets, the Gaz de France Group implements a policy of cooperation and partnership with other energy sector operators, demonstrates its well-developed ability to innovate and practices a customer-focused organization that offers competitive, tailored services to residential users, companies and local governments. The Group has chosen to pursue this growth through a strategy of sustainable development. By making natural gas more accessible and promoting its uses, Gaz de France integrates demand-side management of energy, fosters human development and ensures environmental protection in France, Europe and the world. This activity report presents: the corporate profile of the group, the international natural gas businesses, the financial highlights, the growth objectives of the group in all its businesses (exploration and production, supply and trading, transmission, distribution, services

  3. Energy of solution of rare gases in metals; Energie de dissolution des gaz rares dans les metaux

    Energy Technology Data Exchange (ETDEWEB)

    Blin, J [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1959-07-01

    In order to calculate the energy of solution of rare gases in metals, a method which has given good results in the case of solid solutions in metals has been applied. Nevertheless, it was necessary for this, to know the compressibility of gases under conditions which are not feasible in a laboratory. H. Jensen has studied this compressibility in a precise way for the rare gases Ar, Kr, Xe. It has thus been possible to calculate the energy of solution of these gases in different metals. These calculations have been carried out most thoroughly for the case of uranium. (author) [French] Nous avons applique au calcul de l'energie de dissolution des gaz rares dans les metaux, une methode qui a donne de bons resultats dans le cas des solutions solides metalliques. Il fallait pour cela connaitre la compressibilite des gaz rares dans des conditions impossibles a realiser en laboratoire. Cette compressibilite a ete etudiee par H. Jensen de facon precise pour les gaz rares A, Kr, Xe. Nous avons pu, de ce fait, calculer les energies de dissolution de ces gaz dans les differents metaux. Les calculs ont ete faits plus completement dans le cas de l'uranium. (auteur)

  4. Energy of solution of rare gases in metals; Energie de dissolution des gaz rares dans les metaux

    Energy Technology Data Exchange (ETDEWEB)

    Blin, J. [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1959-07-01

    In order to calculate the energy of solution of rare gases in metals, a method which has given good results in the case of solid solutions in metals has been applied. Nevertheless, it was necessary for this, to know the compressibility of gases under conditions which are not feasible in a laboratory. H. Jensen has studied this compressibility in a precise way for the rare gases Ar, Kr, Xe. It has thus been possible to calculate the energy of solution of these gases in different metals. These calculations have been carried out most thoroughly for the case of uranium. (author) [French] Nous avons applique au calcul de l'energie de dissolution des gaz rares dans les metaux, une methode qui a donne de bons resultats dans le cas des solutions solides metalliques. Il fallait pour cela connaitre la compressibilite des gaz rares dans des conditions impossibles a realiser en laboratoire. Cette compressibilite a ete etudiee par H. Jensen de facon precise pour les gaz rares A, Kr, Xe. Nous avons pu, de ce fait, calculer les energies de dissolution de ces gaz dans les differents metaux. Les calculs ont ete faits plus completement dans le cas de l'uranium. (auteur)

  5. Business plan pour une application Smartphone : du concept au lancement

    OpenAIRE

    Vriamont, Gilles

    2015-01-01

    Création d'une application mobile pour Smartphone. Description théorique concernant la rédaction d'un business plan dans une première partie suivi d'une description théorique des caractéristiques des applications mobiles. Dans une seconde partie, analyse de l'industrie des Smartphones et des applications mobiles suivi de la partie pratique et du développement du produit, partant de la description du produit jusqu'à l'analyse des coûts. Master [120] en Ingénieur de gestion, Université catho...

  6. A Geochemical Approach for Monitoring a CO2 Pilot Site: Rousse, France. A Major gases, CO2-Carbon Isotopes and Noble Gases Combined Approach Une méthode géochimique pour la surveillance d’un site pilote de stockage de CO2 : Rousse, France. Approche combinant les gaz majeurs, l’isotopie du carbone du CO2 et les gaz rares

    Directory of Open Access Journals (Sweden)

    Garcia B.

    2012-02-01

    storage pilot suggest that noble gas compositions produced by oxyfuel process are sufficiently exotic compared to compositions found in nature (reservoir, aquifer and air to be directly used as tracers of the injected CO2, and to detect and quantify leaks at soil and aquifer levels. Ce papier presente la caracterisation geochimique des differents gaz, naturels et anthropogeniques, impliques dans un pilote de stockage de CO2 en champ de gaz naturel appauvri (Rousse, France. Dans ce pilote, le CO2 est produit par oxycombustion d’un gaz naturel transforme en gaz domestique a l’usine de Lacq. Ce CO2 est transporte dans un pipeline de 30 km de longueur jusqu’au reservoir de gaz appauvri de Rousse. Les gaz produits a Rousse avant injection de CO2, le gaz commercial de Lacq et le CO2 resultant de l’oxycombustion ont ete echantillonnes, ainsi que les gaz situes dans un puits de surveillance (a une profondeur de 45 m et les gaz du sol situes au voisinage de Rousse. Pour tous ces echantillons, la composition en gaz majeurs, la signature isotopique du carbone ainsi que l’abondance et signature isotopique des gaz rares ont ete determinees. Les compositions gazeuses du gaz naturel de Rousse sont comparables a celle du gaz domestique de Lacq avec le methane comme compose principal et la fraction C2-C5 et CO2 comme gaz residuels. Les gaz des sols refletent typiquement des melanges entre l’air (pole pur et le CO2 d’origine biogenique (avec des teneurs maximales de l’ordre de 9-10 %, tandis que les gaz presents dans le puits de monitoring refletent typiquement la composition de l’air sans exces de CO2. Le gaz de Rousse et le gaz domestique du site de Lacq ont une composition isotopique δ13CCH4 egale a –41,0 ‰ et –43,0 ‰ respectivement. Le CO2 injecte sur Rousse a une composition isotopique δ13CCO2 egale a –40,0 ‰ a la sortie de la chambre d’oxycombustion, tandis que la composition isotopique δ13CCO2 des gaz des sols est comprise entre –15 et –25

  7. Gaz de France annual report 2003; Gaz de France rapport annuel 2003

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    Today, Gaz de France Group ranks as one of the largest gas utilities in Europe. This success is the fruit of a growth strategy that fuses economic, social and environmental imperatives. To respond more efficiently to fluctuations in the natural gas market and continue to expand its range of competitive products and services, Gaz de France has committed to integrated development across the full spectrum of natural gas activities, from exploration and production to the sale of energy and related services. As the leading supplier of natural gas in France, Gaz de France has honed a targeted policy to acquire equity interests and assets, mainly in Europe, assuring the Group of a privileged place at the heart of the European gas grid. As European energy markets continue to open more widely to competition, the Group intends to benefit from its presence in all the sectors of the natural gas industry and in the European market to confirm its position as an integrated energy operator, focused on gas, among Europe's leaders. To achieve this goal, Gaz de France will concentrate in a balanced fashion on activities linked to infrastructures and activities related to energy supply and services. While assuming its public service responsibilities, the Group will expand the range of products and services to customers. This activity report presents: consolidated financial highlights, profile, corporate governance, Gaz de France's ambition, panorama of activities: energy supply and services (exploration - production, purchase and sale of energy, services), infrastructures (transmission and storage - France, distribution - France, transmission and distribution - international), Commitments of Gaz de France (human resources, research and development, sustainable development, map of main subsidiaries and affiliates)

  8. Gaz de France annual report 2000

    International Nuclear Information System (INIS)

    2000-01-01

    A leader in the natural gas market in Europe, Gaz de France is an integrated group active in all sectors of the natural gas industry. In exploration and production, trading of natural gas, transmission, storage, distribution, energy management, air conditioning and heating, the Group has developed recognized skills and know-how both upstream and down to assure its customers of diversified, efficient and competitive services. A leader in liquefied natural gas, storage and distribution technologies, the Gaz de France Group has strong positions in Europe and operates throughout the world by promoting a strategy of alliances and partnerships at all levels of the gas industry. The goal of the Gaz de France Group is to continue to expand and develop its activities from the wellhead to the burner tip, and to seize, in France and throughout the world, the best opportunities offered to capitalize on its strengths. This activity report presents: the corporate profile, the financial highlights, the principal subsidiaries and affiliates, the major European trunk lines the responsive, customer-focused services (exploration-production, trading, transmission, distribution, services), the actions to ensure performance (productive research, comprehensive quality assurance, mobilized workforce ready for the opening of the markets)

  9. Gaz de France 2006 sustainable development report

    International Nuclear Information System (INIS)

    2006-01-01

    A major European energy utility, the Gaz de France Group produces, purchases, transports, distributes and sells natural gas, electricity and related services for its residential, corporate and local government customers. this report presents the actions implemented by the group to incorporate sustainable development into its strategy. From the point of view of risks and opportunities, the group analyzes what it takes to ensure development that respects people and the environment, and it implements them in all its business lines and management systems. Content: Gaz de France, portrait of a major energy utility, highlights of 2006, challenges and strategy (defining strategy and sustainable development policy, specific risks and opportunities, activities of the Gaz de France group: challenges, impact for stakeholders, transparency and independence in governing), ranking and implementing (defining sustainable development policy: reviewing priorities, meeting all the challenges, publicizing and defending positions, increasing awareness, overseeing and monitoring results), results of the 2004-2006 sustainable development action plan, dialogue and action with stakeholders, performance assessment, performance in response to challenges: energy challenges (guaranteeing regular supplies, controlling atmospheric emissions, promoting energy conservation, developing renewable energy), industrial challenges (ensuring health and safety, limiting the overall environmental impact of group activities), social responsibility challenges (advocating corporate social responsibility, promoting human rights and fighting corruption, encouraging commitment to solidarity, promoting regional development through local initiatives, reconciling acquisitions, procurement and sustainable development, ensuring transparency in natural gas rates, providing shareholders with quality information, promoting diversity, a source of enrichment, making working conditions a performance factor), indicators and

  10. Behaviour of rare gases in solids at high temperature; Comportement des gaz rares dans les solides a haute temperature

    Energy Technology Data Exchange (ETDEWEB)

    Blin, J [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    In this article a number of simple results regarding the solubility and displacement of rare gases in solids have been assembled. These results were obtained from elementary considerations on highly compressed gases and on dislocations. They provide a better understanding of the now fairly numerous experiments dealing with the swelling of irradiated fuels, this swelling being due to the presence of a high proportion of gases in the fission products. Finally, the chances of success of the various methods which may be devised to diminish the swelling are examined. (author) [French] Nous avons rassemble dans ce texte un certain nombre de resultats simples relatifs a la solubilite et au deplacement des gaz rares dans les solides. Ces resultats ont ete obtenus par des considerations elementaires sur les gaz tres comprimes et sur les dislocations. Ils permettent de mieux comprendre les experiences, maintenant assez nombreuses, qui ont trait au gonflement des combustibles irradies; gonflement qui est du a la presence d'une forte proportion de gaz dans les produits de fission. On examine finalement les chances de succes des differents moyens que l'on peut imaginer pour attenuer le gonflement. (auteur)

  11. Formation of multifunctional Fe3O4/Au composite nanoparticles for dual-mode MR/CT imaging applications

    International Nuclear Information System (INIS)

    Hu Yong; Li Jing-Chao; Shen Ming-Wu; Shi Xiang-Yang

    2014-01-01

    Recent advances with iron oxide/gold (Fe 3 O 4 /Au) composite nanoparticles (CNPs) in dual-modality magnetic resonance (MR) and computed tomography (CT) imaging applications are reviewed. The synthesis and assembly of “dumbbelllike” and “core/shell” Fe 3 O 4 /Au CNPs is introduced. Potential applications of some developed Fe 3 O 4 /Au CNPs as contrast agents for dual-mode MR/CT imaging applications are described in detail. (topical review - magnetism, magnetic materials, and interdisciplinary research)

  12. Compatibility problems of canning materials with carbon dioxide at high temperatures; Problemes de comptabilite des materiaux de gainage avec le gaz carbonique aux temperatures elevees

    Energy Technology Data Exchange (ETDEWEB)

    Darras, R; Loriers, H [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    and iron-aluminium alloys should increase as a result of the research carried out with a view to improving their technological and mechanical properties. (authors) [French] L'adoption, en France, du gaz carbonique sous pression comme fluide caloporteur dans les reacteurs avances des filieres graphite-gaz et eau lourde-gaz, a impose la recherche de materiaux de gainage susceptibilite prendre la releve des alliages de magnesium. En effet, ces derniers deviennent inutilisables au dessus de 500 C environ, en raison de la proximite de leur point de fusion et de leurs proprietes mecaniques alors defaillantes, quoique leur compatibilite avec le gaz carbonique reste relativement bonne. Le beryllium, particulierement seduisant en raison de sa faible section de capture pour les neutrons thermiques, presente, entre autres, un inconvenient grave: son utilisation dans le gaz carbonique n'est possible, des 600 C, que si ce gaz est rigoureusement desseche, la pression partielle de vapeur d'eau etant le facteur determinant imposant une dessication d'autant plus poussee que la pression nominale est plus elevee. Dans le cas contraire, apres une courte periode d'incubation, l'oxydation s'accelere, conduisant a une corrosion intergranulaire rapidement destructrice. Neanmoins, les alliages beryllium-calcium ou beryllium-magnesium, a 0,5 pour cent environ d'element d'addition, permettent de surmonter cette difficulte; ils restent utilisables en presence de quelques centaines de vpm de vapeur d'eau jusqu'a 700 C au moins. Les problemes metallurgiques lies a la mise en oeuvre du beryllium ou de ses alliages ont cependant conduit a envisager provisoirement l'utilisation d'aciers inoxydables austenitiques. Ces materiaux sont intrinsequement tres resistants a l'oxydation; mais, comme ils ne peuvent etre employes qu'en faible epaisseur, etant donne leur section de capture importante, il y a lieu de choisir les nuances comparativement les moins oxydables. Au dessus de 600 C, les nuances

  13. Colloidal Au-enhanced surface plasmon resonance imaging: application in a DNA hybridization process

    International Nuclear Information System (INIS)

    Manera, M G; Spadavecchia, J; Taurino, A; Rella, R

    2010-01-01

    The detection of the DNA hybridization mechanism using monodispersed gold nanoparticles as labels is an interesting alternative to increase the sensitivity of the SPR imaging technique. DNA-modified Au nanoparticles (DNA-Au NPs) containing single-stranded (ss) portions of DNA were prepared by monitoring their monolayer formation by UV–vis spectroscopy. The hybridization process between specific thio-oligonucleotides immobilized on the DNA–Au NPs and the corresponding complementary strands is reported and compared with the traditional hybridization process on properly self-assembled thin gold films deposited on glass substrates. A remarkable signal amplification is observed, following the incorporation of colloidal Au into a SPR biosensing experiment, resulting in an increased SPR response to DNA–DNA interactions. In particular Fusarium thiolated DNA (5'HS poly(T) 15 ATC CCT CAA AAA CTG CCG CT-3) and trichothecenes complementary DNA (5'-AGC GGC AGT TTT TGA GGG AT-3') sequences have been explored due to their possible application to agro-industry for the control of food quality

  14. Application of 198Au colloid in the treatment of chronic knee synovial effusions

    International Nuclear Information System (INIS)

    Buril, J.; Zak, J.

    1979-01-01

    25 cases of chronic synovial exudates of the knee joint were treated with the use of 198 Au colloid (5mCi). Improvement was noted in two thirds of the patients after different numbers of applications (one to five). No improvement was seen in four cases of progressive polyarthritis or in two patients with gonarthrosis. This was to be expected though the number of the cases of the disease treated was very low. (author)

  15. Cellular properties of slug flow in vertical co-current gas-liquid flow: slug-churn transition; Caracteristiques cellulaires du regime a poches en ecoulement gaz-liquide co-courant vertical. Transition vers le regime destructure

    Energy Technology Data Exchange (ETDEWEB)

    Lusseyran, Francois

    1990-12-13

    This research thesis reports the study and description of the structure of a slug flow regime in a co-current vertical cylindrical duct, and the characterization and prediction of its transition towards a slug-churn (de-structured) regime. Flow physical mechanisms highlighted by the measurement of two important dynamics variables (wall friction and thickness of liquid films) are related to hypotheses of cellular models. The author first proposes an overview of slug flow regimes: theoretical steady and one-dimensional analysis, mass assessment equations of cellular models, application to the assessment of the flow rate and of the thickness of the film surrounding the gas slug. In the second part, the author addresses the slug flow regime transition towards the slug-churn regime: assessment of the evolution of flow dynamic properties, use of average wall friction analysis to obtain a relevant transition criterion. The third part presents experimental conditions, and measurement methods: conductometry for thickness measurement, polarography for wall friction measurement, and gas phase detection by using an optic barrier or optic fibres [French] Les ecoulements gaz-liquide en conduite verticale presentent quatre configurations ou regimes d'ecoulement. Ce travail porte sur le regime a poches et sur la transition vers la configuration qui lui succede: le regime destructure (churn flow). Les mesures sont effectuees a 200D du point d'injection du gaz, dans une conduite de 12.2 mm de diametre et pour le couple de fluides eau-azote. Les deux principales grandeurs mesurees en fonction des flux d'entree sont: le frottement parietal instantane (methode electrochimique) et l'epaisseur de film instantanee (methode conductimetrique). Une detection optique simultanee de la presence des phases permet un traitement conditionnel de la base de donnees. Les caracteristiques de la cellule moyenne representative de chaque point de fonctionnement en sont deduites: longueur de la cellule

  16. AZO/Au/AZO tri-layer thin films for the very low resistivity transparent electrode applications

    Energy Technology Data Exchange (ETDEWEB)

    Chu, Chien-Hsun [Department of Materials Science and Engineering, National Cheng Kung University, Tainan 70101, Taiwan (China); Wu, Hung-Wei, E-mail: hwwu@mail.ksu.edu.tw [Department of Computer and Communication, Kun Shan University, Tainan 71003, Taiwan (China); Huang, Jow-Lay [Department of Materials Science and Engineering, National Cheng Kung University, Tainan 70101, Taiwan (China); Department of Chemical and Materials Engineering, National University of Kaohsiung, Kaohsiung 81148, Taiwan (China); Research Center for Energy Technology and Strategy, National Cheng Kung University, Tainan 70101, Taiwan (China)

    2014-08-01

    Highlights: • High-quality Al-doped ZnO (AZO)/Au/AZO transparent conducting oxide films. • AZO films (30 nm) made by RF sputtering; ion sputtering for Au film (5–20 nm). • Effects of Au thickness on optical and electrical properties were analyzed. • The resistivity of 9 × 10{sup −5} Ω cm and the transmittance of 86.2% of the multilayer films were obtained in this study. - Abstract: Aluminum-doped ZnO (AZO)/gold/AZO tri-layer structures with very low resistivity and high transmittance are prepared by simultaneous RF magnetron sputtering (for AZO) and ion sputtering (for Au). The properties of the tri-layer films are investigated at different Au layer thicknesses (5–20 nm). The effects of Au layer thickness and the role of Au on the transmission properties of the tri-layer films were investigated. The very low resistivity of 1.01 × 10{sup −5} Ω cm, mobility of 27.665 cm{sup 2} V{sup −1} s{sup −1}, and carrier concentration of 4.563 × 10{sup 22} cm{sup −3} were obtained at an Au layer thickness of 20 nm. The peak transmittance of 86.18% at 650-nm wavelength was obtained at an Au layer thickness of 8 nm. These results show the films to be a good candidate for high-quality electrode scheme in various display applications.

  17. Development of Non-Metallic Fuel Elements for a High-Temperature Gas-Cooled Reactor; Mise au point d'elements combustibles non metalliques pour un reacteur a haute temperature, refroidi par un gaz; Razrabotka nemetallicheskikh teplovydelyashchikh ehlementov dlya vysokotemperaturnogo reaktora s gazovym okhlazhdeniem; Elementos combustibles no metalicos para un reactor de temperatura elevada refrigerado por gas

    Energy Technology Data Exchange (ETDEWEB)

    Liebmann, B.; Schafer, L.; Spener, G. [NUKEM, Nuklear-Chemie und -Metallurgie G.m.b.H., Wolfgang bei Hanau, Federal Republic of Germany (Germany)

    1963-11-15

    un gaz, de la societe Brown-Boveri/Krupp Reaktorbau GmbH, on a retenu et mis au point deux types differents d'elements combustibles. Dans les deux cas, l'element combustible est constitue par une sphere en graphite de 6 cm de diametre enrobant un noyau de matiere combustible ayant la forme d'une pastille cylindrique d'environ 20 mm de diametre et de 16 mm de hauteur. Les deux types different par le noyau aussi bien que par la preparation de la sphere en graphite. Dans le premier type, le noyau est un melange d'UO{sub 2} et de graphite. La preparation consiste a melanger U{sub 3}O{sub 8} et du graphite, a les comprimer en pastilles et a faire reagir les deux composants du melange dans un four sous vide a 1800{sup o}C. Le rapport atomique U : C est 1:45. Etant donne que ce type de pastille ne retient pas completement les produits de fission, il a fallu impregner la sphere en graphite, de maniere a la rendre etanche aux produits de fission. On a pu realiser des permeabilites de l'ordre de 10{sup -6}cm{sup 2}/s . Dans le deuxieme type, le noyau est une solution solide de UC dans ZrC; il est revetu d'une couche de ZrC. Le rapport molaire UC : ZrC est 1 : 20. La preparation de la pastille de combustible s'effectue de la maniere suivantes UO{sub 2}, ZrO{sub 2} et le graphite sont melanges et comprimes en pastilles. On fait reagir le melange pour obtenir les carbures. Le broyage des carbures est suivi d'un pressage a chaud a des temperatures de l'ordre de 2000{sup o}C. On est parvenu a des densites egales a 95% de la densite theorique. Les auteurs decrivent en detail la preparation des pastilles de combustible et mentionnent un certain nombre de leurs proprietes physiques. On pense qu'en raison de leur capacite de retention des gaz de fission, des noyaux de ce type pourront etre enrobes dans des spheres en graphite non impregne. L'etude fait encore etat d'autres avantages de ce genre de combustible. [Spanish] En relacion con el perfeccionamiento de los elementos combustibles

  18. Preparation and properties of carbonaceous products prepared by the cracking of natural gas; Fabrication et proprietes de corps carbones prepares par craquage de gaz naturel

    Energy Technology Data Exchange (ETDEWEB)

    Blum, P L; Bochirol, L; Rappeneau, J; Cornuault, P; Blanchard, R; Moreau, C [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1964-07-01

    Complete results are presented of tests recently carried out at the Grenoble Nuclear Research Centre in an attempt to transform natural gas (gas from Lacq), used as a source of pyrolytic carbon, into carbonaceous products with improved properties. Several methods have been studied: 1 - By using normal grade industrial graphite as support (density of about 1.50) products having densities of about 1.80 are obtained. Their open porosity (6 to 7 per cent) is lower than that of conventional graphites, and several of their characteristics are more or less equal to, or better than those obtained from a double impregnation witch pitch. 2 - The use as supporting material of the semi-products ('cooked') usually used for graphite production does not lead to satisfactory results. The main reasons for this are given. 3 - A new process, called 'BB5', has been developed. The starting materials here are powdered products (petrol coke or graphite) which are put into shape with the use of a binder which can be dispersed in water. The supports thus produced make it possible, because of their porous structure, to make the most of the densification produced by cracking natural gas below 1000 deg. C. The products obtained, which are made up of equal amounts approximately of the supporting material and of pyrocarbon can attain densities of over 1.90. Their very low open porosity can be reduced almost to zero and their impermeability is then excellent (k=10{sup -8} cm{sup 2}sec{sup -1}). They have also a remarkably high resistance to compression, values of 15 to 20 kg/mm{sup 2} being obtained for those carbons which have not undergone a final graphitization treatment. Some examples are given of possible nuclear applications of the materials produced in this manner. (authors) [French] On expose l'ensemble des essais effectues recemment au CEN-G pour preparer, a partir de gaz naturel (gaz de Lacq) comme source de carbone pyrolytique, des corps carbones de caracteristiques ameliorees

  19. Gaz de France annual report 2001; Gaz de France rapport annuel 2001

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    One of Europe's leading gas utilities, the Gaz de France Group operates in all sectors of the natural gas industry, from exploration and production to energy distribution and services, to respond to customer demand efficiently and achieve sustained and profitable growth. To this end, the Group is organized in five lines of business: exploration and production, supply and trading, transmission, distribution and services. Active in 33 countries, the Gaz de France Group first targets growth in Europe, its natural environment. The opening of energy markets and its position at the center of Europe's gas grids offers the Group many opportunities in trading, transmission for third parties, distribution and services. Since August 10, 2000, Gaz de France has made it possible for other gas operators to access its transmission system. The Group capitalizes on its expertise at the global level as well, in emerging markets like Mexico and in fields in which it has recognized know-how, such as liquefied natural gas (LNG). To ensure this growth and pursue its penetration of European and world markets, the Gaz de France Group implements a policy of cooperation and partnership with other energy sector operators, demonstrates its well-developed ability to innovate and practices a customer-focused organization that offers competitive, tailored services to residential users, companies and local governments. The Group has chosen to pursue this growth through a strategy of sustainable development. By making natural gas more accessible and promoting its uses, Gaz de France integrates demand-side management of energy, fosters human development and ensures environmental protection in France, Europe and the world. This activity report presents: the corporate profile of the group, the international natural gas businesses, the financial highlights, the growth objectives of the group in all its businesses (exploration and production, supply and trading, transmission, distribution, services

  20. Gaz de France annual report 2001; Gaz de France rapport annuel 2001

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    One of Europe's leading gas utilities, the Gaz de France Group operates in all sectors of the natural gas industry, from exploration and production to energy distribution and services, to respond to customer demand efficiently and achieve sustained and profitable growth. To this end, the Group is organized in five lines of business: exploration and production, supply and trading, transmission, distribution and services. Active in 33 countries, the Gaz de France Group first targets growth in Europe, its natural environment. The opening of energy markets and its position at the center of Europe's gas grids offers the Group many opportunities in trading, transmission for third parties, distribution and services. Since August 10, 2000, Gaz de France has made it possible for other gas operators to access its transmission system. The Group capitalizes on its expertise at the global level as well, in emerging markets like Mexico and in fields in which it has recognized know-how, such as liquefied natural gas (LNG). To ensure this growth and pursue its penetration of European and world markets, the Gaz de France Group implements a policy of cooperation and partnership with other energy sector operators, demonstrates its well-developed ability to innovate and practices a customer-focused organization that offers competitive, tailored services to residential users, companies and local governments. The Group has chosen to pursue this growth through a strategy of sustainable development. By making natural gas more accessible and promoting its uses, Gaz de France integrates demand-side management of energy, fosters human development and ensures environmental protection in France, Europe and the world. This activity report presents: the corporate profile of the group, the international natural gas businesses, the financial highlights, the growth objectives of the group in all its businesses (exploration and production, supply and trading, transmission, distribution

  1. Oxidation of steel heated in CO{sub 2} medium under pressure; Oxydation d'un acier ordinaire chauffe dans le gaz carbonique sous pression

    Energy Technology Data Exchange (ETDEWEB)

    Darras, R.; Leclercq, D.; Bunard, C. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    Behaviour of low-alloyed steels heated in CO{sub 2} medium under pressure is reported. Tests are carried out in the range of erature reached in the CO{sub 2} cooled reactors (vessel, thermal shield, pipes). The observed weight increases are small, even after more than a thousand hours of heating at 350 deg. C, but oxidation curve looks like progressing linearly. Furthermore, the oxide formed under a pressure of 15 kg/cm{sup 2} is undoubtedly more compact and adherent than the one formed under a pressure of 1 kg/cm{sup 2}. Finally, for practical use, CO{sub 2} steel pipes surface has to be sand blast and pickled. A following phosphatizing protects it from atmospheric corrosion during assembling, but these treatments have no influence on the behaviour of these steels heated in CO{sub 2}. (author)Fren. [French] On etudie le comportement d'aciers au carbone faiblement allies, chauffes dans le gaz carbonique sous pression, aux temperatures atteintes dans les reacteurs refroidis par ce gaz (caisson, bouclier thermique, canalisations). Les augmentations de poids observees sont faibles, meme apres plus de 1000 heures de chauffage a 350 deg. C, mais l'oxydation semble se poursuivre lineairement. De plus, l'oxyde forme dans le gaz carbonique sous pression de 15 kg/cm{sup 2} est nettement plus compact et adherent que celui forme sous pression atmospherique de gaz carbonique. Enfin, dans la pratique, les surfaces d'acier du circuit de gaz carbonique sont necessairement sablees ou decapees; une phosphatation ulterieure le protege de la corrosion atmospherique pendant le montage. Ces traitements sont sans influence sur le comportement de ces aciers dans le gaz carbonique a chaud. (auteur)

  2. Oxidation of steel heated in CO{sub 2} medium under pressure; Oxydation d'un acier ordinaire chauffe dans le gaz carbonique sous pression

    Energy Technology Data Exchange (ETDEWEB)

    Darras, R; Leclercq, D; Bunard, C [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    Behaviour of low-alloyed steels heated in CO{sub 2} medium under pressure is reported. Tests are carried out in the range of erature reached in the CO{sub 2} cooled reactors (vessel, thermal shield, pipes). The observed weight increases are small, even after more than a thousand hours of heating at 350 deg. C, but oxidation curve looks like progressing linearly. Furthermore, the oxide formed under a pressure of 15 kg/cm{sup 2} is undoubtedly more compact and adherent than the one formed under a pressure of 1 kg/cm{sup 2}. Finally, for practical use, CO{sub 2} steel pipes surface has to be sand blast and pickled. A following phosphatizing protects it from atmospheric corrosion during assembling, but these treatments have no influence on the behaviour of these steels heated in CO{sub 2}. (author)Fren. [French] On etudie le comportement d'aciers au carbone faiblement allies, chauffes dans le gaz carbonique sous pression, aux temperatures atteintes dans les reacteurs refroidis par ce gaz (caisson, bouclier thermique, canalisations). Les augmentations de poids observees sont faibles, meme apres plus de 1000 heures de chauffage a 350 deg. C, mais l'oxydation semble se poursuivre lineairement. De plus, l'oxyde forme dans le gaz carbonique sous pression de 15 kg/cm{sup 2} est nettement plus compact et adherent que celui forme sous pression atmospherique de gaz carbonique. Enfin, dans la pratique, les surfaces d'acier du circuit de gaz carbonique sont necessairement sablees ou decapees; une phosphatation ulterieure le protege de la corrosion atmospherique pendant le montage. Ces traitements sont sans influence sur le comportement de ces aciers dans le gaz carbonique a chaud. (auteur)

  3. 1-Hexadecylamine as both reducing agent and stabilizer to synthesize Au and Ag nanoparticles and their SERS application

    International Nuclear Information System (INIS)

    Hou Xiaomiao; Zhan, Xiaoling; Fang Yan; Chen Shutang; Li Na; Zhou Qi

    2011-01-01

    1-Hexadecylamine (HDA)-capped Au and Ag nanoparticles (NPs) have been successfully prepared by a one-pot solution growth method. The HDA is used as both reducing agent and stabilizer in the synthetic process is favorable for investigating the capping mechanism of Au and Ag NPs’ surface. The growth process and characterization of Au and Ag NPs are determined by Ultraviolet–visible (UV–vis) spectroscopy, transmission electron microscopy (TEM), and X-ray diffraction (XRD). Experimental results demonstrate that the HDA-capped Au and Ag NPs are highly crystalline and have good optical properties. Furthermore, surface-enhanced Raman scattering (SERS) spectra of 2-thionaphthol are obtained on the Au and Ag NPs modified glass surface, respectively, indicating that the as-synthesized noble metal NPs have potentially high sensitive optical detection application.

  4. 1-Hexadecylamine as both reducing agent and stabilizer to synthesize Au and Ag nanoparticles and their SERS application

    Energy Technology Data Exchange (ETDEWEB)

    Hou Xiaomiao; Zhan, Xiaoling, E-mail: zhangxl@bit.edu.cn [Beijing Institute of Technology, Department of Chemistry, School of Science (China); Fang Yan, E-mail: fangyan@mail.cnu.edu.cn [Capital Normal University, Beijing Key Lab for Nano-Photonics and Nano-Structure (NPNS), Department of Physics (China); Chen Shutang; Li Na; Zhou Qi [Beijing Institute of Technology, Department of Chemistry, School of Science (China)

    2011-05-15

    1-Hexadecylamine (HDA)-capped Au and Ag nanoparticles (NPs) have been successfully prepared by a one-pot solution growth method. The HDA is used as both reducing agent and stabilizer in the synthetic process is favorable for investigating the capping mechanism of Au and Ag NPs' surface. The growth process and characterization of Au and Ag NPs are determined by Ultraviolet-visible (UV-vis) spectroscopy, transmission electron microscopy (TEM), and X-ray diffraction (XRD). Experimental results demonstrate that the HDA-capped Au and Ag NPs are highly crystalline and have good optical properties. Furthermore, surface-enhanced Raman scattering (SERS) spectra of 2-thionaphthol are obtained on the Au and Ag NPs modified glass surface, respectively, indicating that the as-synthesized noble metal NPs have potentially high sensitive optical detection application.

  5. Gaz de France. 2006 reference document

    International Nuclear Information System (INIS)

    2006-01-01

    This document was issued by Gaz de France, the French gas utility, at the occasion of the opening of the capital of the company. It is intended to shareholders and presents the relevant informations relative to the annual consolidated financial statements of the group according to IFRS and French standards for the year 2005 (selected financial information, business overview, liquidity and capital resources, profit forecasts or estimates, compensation and benefits, issuer assets etc..). It includes also some complementary information about the activities of the group, its estate property, plants and equipments, its R and D and patenting activities, its management and administration, its 2005 and 2006 contracts etc.. (J.S.)

  6. Natural Gas Storage Seismic Monitoring Suivi sismique des stockages de gaz naturel

    Directory of Open Access Journals (Sweden)

    Mari J.L.

    2011-02-01

    té conçues et utilisées de façon continue pendant plusieurs années pour suivre le cycle remplissage/extraction du stockage. Les dispositifs permanents ont permis d’améliorer la précision des mesures de temps d’arrivée jusqu’au dixième de milliseconde. L’arrivée de gaz dans un aquifère se traduit par une rapide variation de vitesse, qui a un impact à la fois sur les temps d’arrivée des réflexions sous les réservoirs et sur les amplitudes aux limites du réservoir. Les mouvements ultérieurs du contact gaz/eau avec le cycle de remplissage/soutirage sont plus difficiles à suivre et nécessitent une excellente précision des mesures de temps d’arrivée des réflexions. L’inversion de ces mesures pour l’estimation des saturations en gaz et en eau est délicate. Cette inversion a été tentée, avec un certain succès, dans le cas de Céré-la-Ronde. Du fait de la densité du dioxyde de carbone, au-delà d’une profondeur de 800 mètres environ, cette inversion risque d’être encore plus délicate pour les stockages de CO2 que pour les stockages de gaz naturel.

  7. Properties of ordered titanium templates covered with Au thin films for SERS applications

    Energy Technology Data Exchange (ETDEWEB)

    Grochowska, Katarzyna, E-mail: kgrochowska@imp.gda.pl [Centre for Plasma and Laser Engineering, Szewalski Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Fiszera 14 St., 80-231 Gdańsk (Poland); Siuzdak, Katarzyna [Centre for Plasma and Laser Engineering, Szewalski Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Fiszera 14 St., 80-231 Gdańsk (Poland); Sokołowski, Michał; Karczewski, Jakub [Faculty of Applied Physics and Mathematics, Gdańsk University of Technology, Narutowicza 11/12 St., 80-233 Gdańsk (Poland); Szkoda, Mariusz [Centre for Plasma and Laser Engineering, Szewalski Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Fiszera 14 St., 80-231 Gdańsk (Poland); Faculty of Chemistry, Gdańsk University of Technology, Narutowicza 11/12 St., 80-233 Gdańsk (Poland); Śliwiński, Gerard [Centre for Plasma and Laser Engineering, Szewalski Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Fiszera 14 St., 80-231 Gdańsk (Poland)

    2016-12-01

    Graphical abstract: - Highlights: • Dimpled Ti substrates prepared via anodization followed by etching. • Highly ordered nano-patterned titanium templates covered with thin Au films. • Enhanced Raman signal indicates on promising sensing material. - Abstract: Currently, roughened metal nanostructures are widely studied as highly sensitive Raman scattering substrates that show application potential in biochemistry, food safety or medical diagnostic. In this work the structural properties and the enhancement effect due to surface enhanced Raman scattering (SERS) of highly ordered nano-patterned titanium templates covered with thin (5–20 nm) gold films are reported. The templates are formed by preparation of a dense structure of TiO{sub 2} nanotubes on a flat Ti surface (2 × 2 cm{sup 2}) and their subsequent etching down to the substrate. SEM images reveal the formation of honeycomb nanostructures with the cavity diameter of 80 nm. Due to the strongly inhomogeneous distribution of the electromagnetic field in the vicinity of the Au film discontinuities the measured average enhancement factor (10{sup 7}–10{sup 8}) is markedly higher than observed for bare Ti templates. The enhancement factor and Raman signal intensity can be optimized by adjusting the process conditions and thickness of the deposited Au layer. Results confirm that the obtained structures can be used in surface enhanced sensing.

  8. Gaz de France interim financial report 2007

    International Nuclear Information System (INIS)

    2007-01-01

    This financial report contains the unaudited condensed financial statements of Gaz de France Group for the first half ended June 30, 2007, which were reviewed by the audit committee on August 27, 2007 and by the board of directors at its meeting on August 28, 2007. It includes forward-looking statements concerning the objectives, strategies, financial position, future operating results and the operations of Gaz de France Group. These statements reflect the Group's current perception of its activities and the markets in which it operates, as well as various estimates and assumptions considered to be reasonable. Content: interim management report (highlights of the first half of 2007, revenues and results for the period, financial structure, data on outstanding stock, outlook); interim consolidated financial statements (consolidated statements of income, consolidated balance sheets, consolidated statements of cash flows, recognized income and expenses, statements of changes in shareholders' equity, note to the consolidated financial statements); statement by the person responsible for the interim financial report; statutory auditors' report. (J.S.)

  9. Gaz de France 2006 annual report

    International Nuclear Information System (INIS)

    2006-01-01

    Gaz de France is major European energy utility, which produces, purchases, transports, distributes and sells natural gas, electricity and related services for its residential, corporate and local government customers. Its strategic focuses are to develop an ambitious marketing strategy, pursue a supply and procurement policy that guarantees the Group's competitiveness, confirm its position as a benchmark infrastructure manager, and speed up its profitable growth in Europe. Gaz de France aligns its strategy with a concrete and ambitious sustainable development policy. Its growth model is based on responsiveness to customers and constructive dialogue with its employees and partners. This document is the activity report of the group for the year 2006. It presents: 1 - the corporate profile of the group; 2 - its strategies (energy, energy supply, infrastructures); 3 - its financial highlights; 4 - its governance, shareholders and human resources; 5 - the activities of the group (exploration and production, energy procurement, energy sales, services, transmission France, storage France, LNG terminals, distribution France, transmission and distribution international, research and development); 6 - its 2006 financial data and financial summary

  10. A study of the fluorescence of the rare gases excited by nuclear particles. Use of the principle for the detection of nuclear radiation by scintillation; Etude de la fluorescence des gaz rares excites par des particules nucleaires. Utilisation pour la detection des rayonnements nucleaires par scintillation

    Energy Technology Data Exchange (ETDEWEB)

    Koch, L [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1959-12-15

    In the first part is studied the properties of atoms excited by the passage of {alpha} particles through the various rare gases at atmospheric pressure. A spectral analysis of the emitted light showed that certain impurities play an important part in producing the fluorescence, and it has led to the conclusion that the light emission contains at least two components - one very short - lived due to the direct deexcitation of the rare gas, the other relatively slower due to the energy transfers to the impurity. The measurement of the life-time of the excited states has confirmed this foregoing hypothesis, the rapid part of the impulse is extremely short: less than 2,25.10{sup -9} s in the case of xenon; the slower part has a life-time depending directly on the nitrogen concentration, nitrogen being the impurity giving the largest effect in all cases. The study of rare gases under the influence of an electric field has made it possible to show that the amount of light produced by an {alpha} particle can be multiplied (by 60, for example, in a field of 600 V:cm) so that the luminescent efficiency is greater than in the case of INaTI. In the second part the characteristics of the rare gases acting as scintillators is examined, the most important property being the absence of fluorescence saturation when the intensity of the excitation incident on the gas is very large. This, together with the very short time of scintillation has made it possible to study a certain number of nuclear physical applications (heavy particle energy-measurements, kinetic studies on nuclear reactors, neutron spectroscopy). (author) [French] On etudie dans la premiere partie les proprietes des atomes excites par le passage de particules {alpha} dans les differents gaz rares a la pression atmospherique. L'etude spectrale de la lumiere emise a montre que certaines impuretes jouent un role considerable dans la fluorescence et on a ete amene a penser que l'emission de lumiere comporte au moins deux

  11. Law no. 2004-803 from August 9, 2004 relative to electricity and gas public utilities and to the power and gas companies; Loi no. 2004-803 du 9 aout 2004 relative au service public de l'electricite et du gaz et aux entreprises electriques et gazieres

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-09-01

    The aim of this law is to allow the administrations to avoid to use their eligibility right with the opening of the electricity and gas markets to competition. It changes the juridical status of the two public utilities Electricite de France (EdF) and Gaz de France (GdF) into two anonymous companies and creates two additional companies for the management of the power and gas networks. It ensures also the transposition of the European directives from June 26, 2003 (2003/54/CE and 2003/55/CE). It contains some proper dispositions and modifies various existing French laws, in particular the law no. 46-628 from April 8, 1946 about the electricity and gas nationalization and the law no. 2000-108 from February 10, 2000 relative to the modernization and development of the electric public utility. (J.S.)

  12. Gaz de France and the sustainable development in 2005

    International Nuclear Information System (INIS)

    2006-01-01

    This booklet provides information on the Gaz de France group involvement in the sustainable development: the stakes, the approach, the energy challenge answers, the security and the solidarity and the active part in the territories development. (A.L.B.)

  13. Shape and size controlled synthesis of Au nanorods: H{sub 2}S gas-sensing characterizations and antibacterial application

    Energy Technology Data Exchange (ETDEWEB)

    Lanh, Le Thi [College of Sciences, Hue University, 77 Nguyen Hue, Hue City (Viet Nam); Hoa, Tran Thai, E-mail: trthaihoa@yahoo.com [College of Sciences, Hue University, 77 Nguyen Hue, Hue City (Viet Nam); Cuong, Nguyen Duc [College of Sciences, Hue University, 77 Nguyen Hue, Hue City (Viet Nam); Faculty of Hospitality and Tourism, Hue University, 22 Lam Hoang, Hue City (Viet Nam); Khieu, Dinh Quang [College of Sciences, Hue University, 77 Nguyen Hue, Hue City (Viet Nam); Quang, Duong Tuan [College of Education, Hue University, 34 Le Loi, Hue City (Viet Nam); Van Duy, Nguyen; Hoa, Nguyen Duc [International Training Institute for Materials Science, Hanoi University of Science and Technology, Hanoi (Viet Nam); Van Hieu, Nguyen, E-mail: hieu@itims.edu.vn [International Training Institute for Materials Science, Hanoi University of Science and Technology, Hanoi (Viet Nam)

    2015-06-25

    Highlights: • We have demonstrated a facile method to prepare colloid Au nanorods. • The size and shape of Au nanorods can be controlled via seed-mediated growth method. • The H{sub 2}S gas-sensing properties have been investigated. • The antibacterial application has been conducted. - Abstract: Controlling their size and shape is one of the important issues in the fundamental study and application of colloidal metal nanoparticles. In the current study, different sizes and shapes of Au nanorods were fabricated using a seed-mediated growth method. Material characterization by X-ray diffraction and transmission electron microscopy revealed that the obtained products were made of single-crystal Au nanorods with an average diameter and length of 10 nm and 40 nm, respectively. The Au nanorod-based sensor exhibited significantly high sensitivity and fast response/recovery time to low concentrations (2.5–10 ppm) of H{sub 2}S at temperatures ranging from 300 °C to 400 °C. Additionally, they exhibited antibacterial effect at low concentration. These results suggested that the fabricated Au nanorods have excellent potential for practical application in air pollution monitoring and biomedicine.

  14. Shape and size controlled synthesis of Au nanorods: H2S gas-sensing characterizations and antibacterial application

    International Nuclear Information System (INIS)

    Lanh, Le Thi; Hoa, Tran Thai; Cuong, Nguyen Duc; Khieu, Dinh Quang; Quang, Duong Tuan; Van Duy, Nguyen; Hoa, Nguyen Duc; Van Hieu, Nguyen

    2015-01-01

    Highlights: • We have demonstrated a facile method to prepare colloid Au nanorods. • The size and shape of Au nanorods can be controlled via seed-mediated growth method. • The H 2 S gas-sensing properties have been investigated. • The antibacterial application has been conducted. - Abstract: Controlling their size and shape is one of the important issues in the fundamental study and application of colloidal metal nanoparticles. In the current study, different sizes and shapes of Au nanorods were fabricated using a seed-mediated growth method. Material characterization by X-ray diffraction and transmission electron microscopy revealed that the obtained products were made of single-crystal Au nanorods with an average diameter and length of 10 nm and 40 nm, respectively. The Au nanorod-based sensor exhibited significantly high sensitivity and fast response/recovery time to low concentrations (2.5–10 ppm) of H 2 S at temperatures ranging from 300 °C to 400 °C. Additionally, they exhibited antibacterial effect at low concentration. These results suggested that the fabricated Au nanorods have excellent potential for practical application in air pollution monitoring and biomedicine

  15. Gaz de France annual report 2000; Gaz de France rapport annuel 2000

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    A leader in the natural gas market in Europe, Gaz de France is an integrated group active in all sectors of the natural gas industry. In exploration and production, trading of natural gas, transmission, storage, distribution, energy management, air conditioning and heating, the Group has developed recognized skills and know-how both upstream and down to assure its customers of diversified, efficient and competitive services. A leader in liquefied natural gas, storage and distribution technologies, the Gaz de France Group has strong positions in Europe and operates throughout the world by promoting a strategy of alliances and partnerships at all levels of the gas industry. The goal of the Gaz de France Group is to continue to expand and develop its activities from the wellhead to the burner tip, and to seize, in France and throughout the world, the best opportunities offered to capitalize on its strengths. This activity report presents: the corporate profile, the financial highlights, the principal subsidiaries and affiliates, the major European trunk lines the responsive, customer-focused services (exploration-production, trading, transmission, distribution, services), the actions to ensure performance (productive research, comprehensive quality assurance, mobilized workforce ready for the opening of the markets)

  16. Gaz de France 2006 sustainable development report; Gaz de France 2006 rapport developpement durable

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    A major European energy utility, the Gaz de France Group produces, purchases, transports, distributes and sells natural gas, electricity and related services for its residential, corporate and local government customers. this report presents the actions implemented by the group to incorporate sustainable development into its strategy. From the point of view of risks and opportunities, the group analyzes what it takes to ensure development that respects people and the environment, and it implements them in all its business lines and management systems. Content: Gaz de France, portrait of a major energy utility, highlights of 2006, challenges and strategy (defining strategy and sustainable development policy, specific risks and opportunities, activities of the Gaz de France group: challenges, impact for stakeholders, transparency and independence in governing), ranking and implementing (defining sustainable development policy: reviewing priorities, meeting all the challenges, publicizing and defending positions, increasing awareness, overseeing and monitoring results), results of the 2004-2006 sustainable development action plan, dialogue and action with stakeholders, performance assessment, performance in response to challenges: energy challenges (guaranteeing regular supplies, controlling atmospheric emissions, promoting energy conservation, developing renewable energy), industrial challenges (ensuring health and safety, limiting the overall environmental impact of group activities), social responsibility challenges (advocating corporate social responsibility, promoting human rights and fighting corruption, encouraging commitment to solidarity, promoting regional development through local initiatives, reconciling acquisitions, procurement and sustainable development, ensuring transparency in natural gas rates, providing shareholders with quality information, promoting diversity, a source of enrichment, making working conditions a performance factor), indicators and

  17. Evolution dans la gestion de la détection gaz

    CERN Document Server

    Bonthond, F

    1999-01-01

    Cet article présente l'interface graphique qui a été développée pour gérer d'une façon visuelle et globale la détection des gaz inflammables utilisés dans les expériences du hall EHN1 (NA49, NA56, tests pour ATLAS, CMS, Alice, etc.). A cet effet, on utilise des détecteurs catalytiques connectés à une centrale. Afin de retransmettre les alarmes à la salle de contrôle des pompiers, cette centrale est couplée à un automate programmable connecté au réseau Ethernet du CERN. Une liaison filaire entre l'automate et le synoptique câblé des alarmes de niveau 3 assure la redondance nécessaire à ce type d'alarmes. Le logiciel de contrôle LabView a été utilisé pour développer l'interface graphique. Elle permet de visualiser sur n'importe quel PC ou X-Terminal le taux de remplissage des bouteilles de gaz, la position des électrovannes ainsi que les asservissements qui pilotent lors d'une alarme, notamment les ventilations, les panneaux de signalisation et les arrêts d'urgence.

  18. Gaz de France and the sustainable development in 2005; Gaz de France et le developpement durable en 2005

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    This booklet provides information on the Gaz de France group involvement in the sustainable development: the stakes, the approach, the energy challenge answers, the security and the solidarity and the active part in the territories development. (A.L.B.)

  19. La formation de l'oxyde azotique dans les flammes de diffusion de gaz naturel Nitrogen. Oxyde Formation in Natural-Gas Diffusion Flams

    Directory of Open Access Journals (Sweden)

    Portrait L. M.

    2006-11-01

    Full Text Available L'étude de la formation de l'oxyde azotique dans des flammes de diffusion de ga naturel est effectuée depuis deux ans sur le four expérimental du Groupe d'Etude des Flammes de Gaz Naturel situé à Toulouse. Un certain nombre de variables ont été explorées : type de flamme, excès d'air, préchauffage de l'air, teneur en oxygène du comburant, puissance calorifique, et débit de moment cinétique. L'étude a mis en évidence une corrélation générale, quelle que soit la variable considérée, entre la quantité maximale d'oxyde d'azote formé et la température maximale de la flamme. Certains des résultats précédents ont été exploités à l'Institut Français du Pétrole, en vue d'établir une équation de vitesse de formation de NO applicable aux flammes axiales de diffusion de gaz naturel. Les calculs s'appuient sur les connaissances obtenues lors de l'étude cinétique de formation de NO effectuée au Laboratoire d'Aérothermique Fondamentale. Les résultats du calcul théorique confirment ceux de l'étude sur le four expérimental en ce qui concerne l'influence prépondérante de la température sur la formation de l'oxyde azotique. Par ailleurs, le calcul théorique retrouve bien les résultats obtenus lors de l'étude fondamentale, selon lesquels la cinétique de formation de NO évolue le long de la flamme depuis le front de flamme jusqu'aux gaz brûlés. La généralisation à un grand nombre de flammes de l'équation cinétique expérimentale obtenue nécessite maintenant de prendre en compte certains phénomènes de diffusion négligés jusqu'à présent. Research on the formation of nitrogen oxide in natural-gas diffusion flammes has been going on for two years in the experimental furnace of the Groupe d'Etude des Flammes de Gaz Naturel located in Toulouse. Different variables have been investigoted such as type of flamme, air excess, air preheating, oxygen content in the oxidant, heating power and kinetic moment output

  20. Synthesis Gas Purification Purification des gaz de synthèse

    Directory of Open Access Journals (Sweden)

    Chiche D.

    2013-10-01

    ce faire, une étape de gazéification convertit la charge carbonée en un gaz de synthèse (mélange de CO et H2, lequel, après ajustement du ratio H2/CO et élimination du CO2, subit ensuite la réaction de FischerTropsch. Les gaz de synthèse contiennent cependant de nombreuses impuretés qui nécessitent d’être éliminées afin d’éviter l’empoisonnement des catalyseurs Fischer-Tropsch. En raison de la grande variété de charges pouvant être mises en oeuvre, la composition des gaz de synthèse est susceptible de subir d’importantes variations, en particulier de part la nature des impuretés (éléments, spéciation présentes ainsi que leurs teneurs relatives. La composition des gaz de synthèse est également soumise à des spécifications extrêmement sévères en terme de pureté liées à l’importante sensibilité aux poisons des catalyseurs FT. Pour ces raisons, la purification des gaz de synthèse constitue un défi majeur pour le développement des procédés B-XTL. Dans cet article, nous présentons les principaux enjeux liés à la purification des gaz de synthèse. Les différents types d’impuretés pouvant être présentes dans les gaz de synthèse sont présentées. L’influence de la nature de la charge, des technologies de gazéification ainsi que des conditions opératoires associées sur la nature des impuretés et leurs teneurs relatives est discutée. Une attention particulière est portée au devenir des composés soufrés, azotés, des halogènes, métaux lourds et métaux de transition. Les principales technologies de purification des gaz de synthèse (adsorption, absorption, réactions catalytiques, etc. sont finalement décrites, ainsi que les défis associés.

  1. Research on hydrogen by Gaz de France

    International Nuclear Information System (INIS)

    Donat, G.; Lecoanet, A.; Roncato, J.-P.

    1978-01-01

    With the increasing energy needs of mankind and the earth's necessarily limited resources of fuel, the time will come when the demand for hydrocarbons will exceed the world production capacity. This situation will subsequently get even worse because of the depletion of recoverable reserves. Massive recourse to nuclear and solar energy thus appears indispensable, and the use of hydrogen as a vector for such energies has been under consideration for several years, especially in France where petroleum resources are very limited. Gaz de France has been doing research on the mass production of hydrogen by the decomposition of water and has just come to rather pessimistic conclusions as to the competitiveness of thermochemical processes in comparison with electrolytic methods. However, the electrolysis of water offers interesting prospects providing its efficiency and economics can be improved. Furthermore research on the storage and transportation of hydrogen has already enabled some conclusions to be drawn in these fields where gaseous vectors have very encouraging possibilities [fr

  2. Simplified theory of gas-jet pumps and experimental verification; Theorie simplifiee des trompes a gaz et verification experimentale

    Energy Technology Data Exchange (ETDEWEB)

    Costes, D [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    With a view to using the gas-jet pump in the fuel-study loops of gas reactors, a theory is developed for an unidimensional mixer, applicable to the case of low compression ratios in the induced current. This theory makes it possible to optimize the diameter of the mixer if the pressure-drop coefficient {alpha} of the mixer is known with respect to the induced current. An experimental study has made it possible to define the geometry suitable for such pumps, and to provide a remarkably constant value of {alpha} for the economically advantageous designs; this makes it possible to define simply the geometry of the optimized pump as a function of the geometry of the circuit in use, and independently of the flow-rate conditions. (author) [French] Dans le but d'utiliser la pompe a jet (ou trompe) dans des boucles d'etude de combustible des piles a gaz, on etablit une theorie du melangeur unidimensionnel, applicable dans la cas des faibles rapports de compression dans le courant induit. Cette theorie permet l'optimisation du diametre de melangeur, moyennant la connaissance du coefficient {alpha} de pertes de charge de celui-ci, relativement au courant induit. Une recherche experimentale a permis de preciser la geometrie a adopter dans de telles pompes, et fourni pour {alpha} une valeur remarquablement constante dans les configurations economiquement interessantes, ce qui permet de definir simplement la geometrie de la pompe optimisee en fonction de la geometrie du circuit d'utilisation et independamment des conditions de debit. (auteur)

  3. Self-standing corrugated Ag and Au-nanorods for plasmonic applications

    DEFF Research Database (Denmark)

    Habouti, S.; Mátéfi-Tempfli, M.; Solterbeck, C.-H.

    2011-01-01

    We use home-made Si-supported anodized alumina thin film templates for the electrodeposition of large area self-standing Ag- and Au-nanorod (Au-NR) arrays. The deposition conditions chosen, i.e. electrolyte composition and deposition voltage, lead to a corrugated rod morphology, particularly for Au...

  4. Properties of ordered titanium templates covered with Au thin films for SERS applications

    Science.gov (United States)

    Grochowska, Katarzyna; Siuzdak, Katarzyna; Sokołowski, Michał; Karczewski, Jakub; Szkoda, Mariusz; Śliwiński, Gerard

    2016-12-01

    Currently, roughened metal nanostructures are widely studied as highly sensitive Raman scattering substrates that show application potential in biochemistry, food safety or medical diagnostic. In this work the structural properties and the enhancement effect due to surface enhanced Raman scattering (SERS) of highly ordered nano-patterned titanium templates covered with thin (5-20 nm) gold films are reported. The templates are formed by preparation of a dense structure of TiO2 nanotubes on a flat Ti surface (2 × 2 cm2) and their subsequent etching down to the substrate. SEM images reveal the formation of honeycomb nanostructures with the cavity diameter of 80 nm. Due to the strongly inhomogeneous distribution of the electromagnetic field in the vicinity of the Au film discontinuities the measured average enhancement factor (107-108) is markedly higher than observed for bare Ti templates. The enhancement factor and Raman signal intensity can be optimized by adjusting the process conditions and thickness of the deposited Au layer. Results confirm that the obtained structures can be used in surface enhanced sensing.

  5. Electrical conductivity dependence of thin metallic films of Au and Pd as a top electrode in capacitor applications

    International Nuclear Information System (INIS)

    Nazarpour, S.; Langenberg, E.; Jambois, O.; Ferrater, C.; Garcia-Cuenca, M.V.; Polo, M.C.; Varela, M.

    2009-01-01

    Electrical conductivity dependence of thin metallic films of Au and Pd over the different perovskites was investigated. It is found from electrical properties that crystallographic growth orientation of Au and Pd thin layers attained from X-ray diffraction results indicate the slop of current (I)-voltage (V) plots. Besides, surface morphology and topography was considered using Field Emission Scanning Electron Microscopy and Atomic Force Microscopy, respectively. Obtained results showed the Stranski-Krastanov growth of the Pd and Au. Indeed, diminishing of the root-mean-square roughness of Pd/BiMnO 3 /SrTiO 3 following by Au deposition should be concerned due to growth of Au onto the crack-like parts of the substrate. These crack-like parts appeared due to parasitic phases of the Bi-Mn-O system mainly Mn 3 O 4 (l 0 l) and Mn 3 O 4 (0 0 4 l). The different response in the electrical properties of heterostructures suggests that electrical conductance of the Au and Pd thin metallic films have the crystallographic orientation dependence. Furthermore, polycrystallinity of the thin metallic films are desired in electrode applications due to increase the conductivity of the metallic layers.

  6. Toprak Radon (222Rn Gazı Anomalilerinin ARIMA Analizi

    Directory of Open Access Journals (Sweden)

    Miraç KAMIŞLIOĞLU

    2014-12-01

    Full Text Available Özet: Zaman serileri analizi, istatistik, ekonomi, fizik ve mühendislik gibi bilim dallarında geniş uygulama alanına sahiptir. Zaman serisi analizi, değişkenlerin gelecekteki değerlerinin doğru bir şekilde tahmin edilmesi için kullanılan bir yöntemdir. Bu çalışmada, bir deprem öncüsü olarak bilinen toprak radon gazı (222Rn ölçümleri ile bir zaman serisi oluşturulmuştur. Bu veriler kullanılarak, otoregresif süreçler (ARIMA yardımıyla dinamik sistem modellemesi yapılmıştır. ARIMA; zaman serileri analizinde, zaman içerisinde rastgele gerçekleşen bir stokastik (olasılıksal sürecin veya hatalarının modellenmesidir. ARIMA modeli, temelde Box-Jenkins modeline dayanmaktadır. Box-Jenkins modeli, tek değişkenli zaman serilerinin ileriye dönük tahmin ve kontrolünde kullanılan istatistiksel tabanlı bir yöntemdir. Elde edilen sonuçlar, ARIMA modellerinin tahmin konusundaki başarısını göstermektedir. Anahtar kelimeler: Zaman Serileri Analizi, Radon Gazı (222Rn, ARIMA ARIMA Analysis of Soil Radon (222Rn Gas Anomalies Abstract: Time series analysis, has wide applications in statistics, economics, physics and engineering such disciplines. This method used for estimate correctly future values of the variables. In this study, is formed a time series with soil radon gas (222Rn measurements known as a pioneer of an earthquake. Dynamic system modelling was performed with autoregressive (ARIMA modelling process by used these measurements. ARIMA; time series analysis is modelled of the recoverable over time a random stochastic (probabilistic process or its errors. ARIMA model is based on Box-Jenkins model. Box-Jenkins model is a statistically based method which is used forward-looking forecasting and control of univariate time series. The obtained results, ARIMA model is indicating success in predict subject. Key words: Time Series Analysis, Radon Gas (222Rn, ARIMA

  7. Report made on behalf of the commission of economic affairs, environment and territory about the law project (no. 1613), relative to the electric and gas public utilities and to the power and gas companies; Rapport fait au nom de la Commission des affaires economiques, de l'environnement et du territoire sur le projet de loi (no. 1613), relatif au service public de l'electricite et du gaz et aux entreprises electriques et gazieres

    Energy Technology Data Exchange (ETDEWEB)

    Lenoir, J.C.

    2004-06-01

    The aim of this report is to present to the French deputies the comments made by the commission of economic affairs, environment and territory about the law project relative to the change of status of the power and gas public utilities in the framework of the deregulation of European energy markets. This law changes the juridical status of the two state monopolies Electricite de France (EdF) and Gaz de France (GdF) into two anonymous companies and creates two additional companies for the management of the power and gas networks. It ensures also the transposition of the European directives from June 26, 2003 (2003/54/CE and 2003/55/CE). It contains some proper dispositions and modifies various existing French laws, in particular the law no. 46-628 from April 8, 1946 about the electricity and gas nationalization and the law no. 2000-108 from February 10, 2000 relative to the modernization and development of the electric public utility. The first part of the document reports on the general discussions about the law project while the second part makes a detailed analysis of each article with some proposals of modifications. A comparative table puts in parallel the existing texts, the law project and the proposals made by the commission. (J.S.)

  8. Advice presented on behalf of the commission of finances, economy and plan about the law project (no. 1613) relative to the electric and gas public utilities and to the power and gas companies; Avis presente au nom de la Commission des finances, de l'economie generale et du plan sur le projet de loi (no. 1613), relatif au service public de l'electricite et du gaz et aux entreprises electriques et gazieres

    Energy Technology Data Exchange (ETDEWEB)

    Carayon, B.

    2004-06-01

    The aim of this report is to present to the French deputies the advice of the commission of finances and economy about the law project relative to the change of status of the power and gas public utilities in the framework of the deregulation of European energy markets. This law changes the juridical status of the two state monopolies Electricite de France (EdF) and Gaz de France (GdF) into two anonymous companies and creates two additional companies for the management of the power and gas networks. It ensures also the transposition of the European directives from June 26, 2003 (2003/54/CE and 2003/55/CE). It contains some proper dispositions and modifies various existing French laws, in particular the law no. 46-628 from April 8, 1946 about the electricity and gas nationalization and the law no. 2000-108 from February 10, 2000 relative to the modernization and development of the electric public utility. The first part of the document reports on the general discussions and comments made by the commission about the law project while the second part concerns the detailed analysis of the articles 16 and 22 about the pension funds of EdF and GdF agents and the change of the status of both utilities. The amendments adopted by the commission for these articles conclude the report. (J.S.)

  9. Law project modified by the Senate after urgency declaration relative to the electric and gas public utilities and to the power and gas companies; Projet de loi modifie par le Senat apres declaration d'urgence relatif au service public de l'electricite et du gaz et aux entreprises electriques et gazieres

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    This document is the modifications made by the French Senate after the first reading of the law project adopted by the House of Commons and relative to the change of status of the power and gas public utilities in the framework of the deregulation of European energy markets. This law changes the juridical status of the two state monopolies Electricite de France (EdF) and Gaz de France (GdF) into two anonymous companies and creates two additional companies for the management of the power and gas networks. It ensures also the transposition of the European directives from June 26, 2003 (2003/54/CE and 2003/55/CE). It contains some proper dispositions and modifies various existing French laws, in particular the law no. 46-628 from April 8, 1946 about the electricity and gas nationalization and the law no. 2000-108 from February 10, 2000 relative to the modernization and development of the electric public utility. The document lists the modifications made by the Senate article by article. (J.S.)

  10. Project of law modified by the Senate relative to the electric and gas public utilities and to the electric and gas companies; Projet de loi modifie par le Senat relatif au service public de l'electricite et du gaz et aux entreprises electriques et gazieres

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    This project of law aims to adapt the electricity and gas sector to the new economical context of opening of the energy markets to competition. It gives to energy companies the internal organization base necessary to warrant a high level of service and a transparent and non-discriminatory access of third parties to transport and distribution networks. These evolutions will allow Electricite de France (EdF) and Gaz de France (GdF) companies to compete on equal terms with their European competitors. It confirms first the prime role of public utility of both companies and then transposes the dispositions of the European directives relative to the organization of EdF and GdF integrated companies. It foresees the creation of two daughter companies for the management of energy transport activities. The project of law foresees also the change of the status of EdF and GdF companies and the reform of the retirement pensions of the personnel. This report presents the modifications added by the Senate to the text of law adopted at first reading by the House of Commons. (J.S.)

  11. Gaz de France. 2006 reference document; Gaz de France. Document de reference 2006

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    This document was issued by Gaz de France, the French gas utility, at the occasion of the opening of the capital of the company. It is intended to shareholders and presents the relevant informations relative to the annual consolidated financial statements of the group according to IFRS and French standards for the year 2005 (selected financial information, business overview, liquidity and capital resources, profit forecasts or estimates, compensation and benefits, issuer assets etc..). It includes also some complementary information about the activities of the group, its estate property, plants and equipments, its R and D and patenting activities, its management and administration, its 2005 and 2006 contracts etc.. (J.S.)

  12. A white-emitting ZnO-Au nanocomposite and its SERS applications

    Energy Technology Data Exchange (ETDEWEB)

    Sun Lanlan [State Key Laboratory of Luminescence and Applications, Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, 3888 East Nan-Hu Road, Open Economic Zone, Changchun 130033 (China); Zhao Dongxu, E-mail: dxzhao2000@yahoo.com.cn [State Key Laboratory of Luminescence and Applications, Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, 3888 East Nan-Hu Road, Open Economic Zone, Changchun 130033 (China); Ding Meng; Zhao Haifeng; Zhang Zhenzhong; Li Binghui; Shen Dezhen [State Key Laboratory of Luminescence and Applications, Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, 3888 East Nan-Hu Road, Open Economic Zone, Changchun 130033 (China)

    2012-08-01

    We reported a simple method to synthesize ZnO-Au nanocomposites (hybrid A) by combining hydrothermal and electric beam evaporation deposition method. It was found that Au deposition time takes an important role in the generation of Au nanoparticles. Changing Au deposition time makes the thickness of Au formed on ZnO nanorods increase from 10 nm to 70 nm. On the other hand, white-emitting ZnO-Au nanocomposites (hybrid B) were obtained after treating hybrid A with HCl solution. Thanks to the covering of Au film and acid etching, it induces many defects on the surface of ZnO NRs, and largely enhances the visible emission of surviving ZnO and finally generates white emission on Au mesocrystals (hybrid B). Both of the ZnO-Au hybrids (A and B) can be applied as substrates in surface-enhanced Raman scattering (SERS) measurement. A typical probe molecule, 4-ATP was used to test the SERS activity of the ZnO-Au composites and the results indicated good Raman activity on the substrates.

  13. Observation of Au + AuAu + Au + ρ0 and Au + AuAu* + Au* + ρ0 with STAR

    International Nuclear Information System (INIS)

    Spencer, K.

    2002-01-01

    First observation of the reactions Au + AuAu + Au + ρ 0 and Au + AuAu* + Au* + ρ 0 with the STAR detector are reported. The ρ are produced at small perpendicular momentum, as expected if they couple coherently to both nuclei. Models of vector meson production and the correlation with nuclear breakup are discussed, as well as a fundamental test of quantum mechanics that is possible with the system. (author)

  14. Gaz de France 2006 annual report; Gaz de France 2006 rapport d'activite

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    Gaz de France is major European energy utility, which produces, purchases, transports, distributes and sells natural gas, electricity and related services for its residential, corporate and local government customers. Its strategic focuses are to develop an ambitious marketing strategy, pursue a supply and procurement policy that guarantees the Group's competitiveness, confirm its position as a benchmark infrastructure manager, and speed up its profitable growth in Europe. Gaz de France aligns its strategy with a concrete and ambitious sustainable development policy. Its growth model is based on responsiveness to customers and constructive dialogue with its employees and partners. This document is the activity report of the group for the year 2006. It presents: 1 - the corporate profile of the group; 2 - its strategies (energy, energy supply, infrastructures); 3 - its financial highlights; 4 - its governance, shareholders and human resources; 5 - the activities of the group (exploration and production, energy procurement, energy sales, services, transmission France, storage France, LNG terminals, distribution France, transmission and distribution international, research and development); 6 - its 2006 financial data and financial summary.

  15. Synthesis of biocompatible AuAgS/Ag2S nanoclusters and their applications in photocatalysis and mercury detection

    International Nuclear Information System (INIS)

    Zhao, Qian; Chen, Shenna; Zhang, Lingyang; Huang, Haowen; Liu, Fengping; Liu, Xuanyong

    2014-01-01

    In this paper, a facile approach for preparation of AuAgS/Ag 2 S nanoclusters was developed. The unique AuAgS/Ag 2 S nanoclusters capped with biomolecules exhibit interesting excellent optical and catalytic properties. The fluorescent AuAgS/Ag 2 S nanoclusters show tunable luminescence depending on the nanocluster size. The apoptosis assay demonstrated that the AuAgS/Ag 2 S nanoclusters showed low cytotoxicity and good biocompatibility. Therefore, the nanoclusters can be used not only as a probe for labeling cells but also for their photocatalytic activity for photodegradation of organic dye. Moreover, a highly selective and sensitive assay for detection of mercury including Hg 2+ and undissociated mercury complexes was developed based on the quenching fluorescent AuAgS/Ag 2 S nanoclusters, which provides a promising approach for determining various forms of Hg in the mercury-based compounds in environment. These unique nanoclusters may have potential applications in biological labeling, sensing mercury, and photodegradation of various organic pollutants in waste water.Graphical Abstract

  16. Gaz de France: first half 2007 results

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    Paris, 29 August 2007, Gaz de France Group presents its first half 2007 results (billion euros): Sales revenue 13.78 (-11% with respect to 2006), EBITDA 3.11 (-4.9%), Operating income 2.33 ( -8.7%), Net income Group share 1.51 (-11%), Net income Group share per share 1.53 euro (-11%). The half-year results are attributable primarily to three factors: - A very difficult environment with exceptionally mild climate conditions in the first half, impacting nearly all of the businesses, and unfavourable market conditions, reflected in particular in the low gas prices on the markets; - A tariff context which did not negatively impact the sales margins following a very difficult year 2006; - Good performance in international activities. Despite the environment, the Group is maintaining its financial target for 2007, as announced in March this year: 2007 will be a year of consolidation. EBITDA is expected to be in line with that of 2006. This target assumes average climate conditions during the second half 2007.

  17. Gaz de France: first half 2007 results

    International Nuclear Information System (INIS)

    2007-01-01

    Paris, 29 August 2007, Gaz de France Group presents its first half 2007 results (billion euros): Sales revenue 13.78 (-11% with respect to 2006), EBITDA 3.11 (-4.9%), Operating income 2.33 ( -8.7%), Net income Group share 1.51 (-11%), Net income Group share per share 1.53 euro (-11%). The half-year results are attributable primarily to three factors: - A very difficult environment with exceptionally mild climate conditions in the first half, impacting nearly all of the businesses, and unfavourable market conditions, reflected in particular in the low gas prices on the markets; - A tariff context which did not negatively impact the sales margins following a very difficult year 2006; - Good performance in international activities. Despite the environment, the Group is maintaining its financial target for 2007, as announced in March this year: 2007 will be a year of consolidation. EBITDA is expected to be in line with that of 2006. This target assumes average climate conditions during the second half 2007

  18. AuCu@Pt Nanoalloys for Catalytic Application in Reduction of 4-Nitrophenol

    Directory of Open Access Journals (Sweden)

    Sadia Mehmood

    2016-01-01

    Full Text Available To enhance and optimize nanocatalyst ability for nitrophenol (4-NP reduction reaction we look beyond Au-metal nanoparticles and describe a new class of Au nanoalloys with controlled composition for core of AuCu-metals and Pt-metal shell. The reduction of 4-NP was investigated in aqueous media spectroscopically on 7.8 nm Au nanospheres (AuNSs, 8.3 nm AuCuNSs, and 9.1 nm AuCu@Pt core-shell NSs in diameter. The rate constants of the catalyzed reaction at room temperature, activation energies, and entropies of activation of reactions catalyzed by the AuCu@Pt core-shell NSs are found to have different values to those of the pure metal NSs. The results strongly support the proposal that catalysis by nanoparticles is taking place efficiently on the surface of NSs. These core-shell nanocatalysts exhibited stability throughout the reduction reaction and proved that heterogonous type mechanisms are most likely to be dominant in nanoalloy based catalysis if the surface of the NSs is not defected upon shell incorporation.

  19. Homogenization of some radiative heat transfer models: application to gas-cooled reactor cores; Homogeneisation de modeles de transferts thermiques et radiatifs: application au coeur des reacteurs a caloporteur gaz

    Energy Technology Data Exchange (ETDEWEB)

    El Ganaoui, K

    2006-09-15

    In the context of homogenization theory we treat some heat transfer problems involving unusual (according to the homogenization) boundary conditions. These problems are defined in a solid periodic perforated domain where two scales (macroscopic and microscopic) are to be taken into account and describe heat transfer by conduction in the solid and by radiation on the wall of each hole. Two kinds of radiation are considered: radiation in an infinite medium (non-linear problem) and radiation in cavity with grey-diffuse walls (non-linear and non-local problem). The derived homogenized models are conduction problems with an effective conductivity which depend on the considered radiation. Thus we introduce a framework (homogenization and validation) based on mathematical justification using the two-scale convergence method and numerical validation by simulations using the computer code CAST3M. This study, performed for gas cooled reactors cores, can be extended to other perforated domains involving the considered heat transfer phenomena. (author)

  20. Facile Synthesis of Quasi-One-Dimensional Au/PtAu Heterojunction Nanotubes and Their Application as Catalysts in an Oxygen-Reduction Reaction.

    Science.gov (United States)

    Cai, Kai; Liu, Jiawei; Zhang, Huan; Huang, Zhao; Lu, Zhicheng; Foda, Mohamed F; Li, Tingting; Han, Heyou

    2015-05-11

    An intermediate-template-directed method has been developed for the synthesis of quasi-one-dimensional Au/PtAu heterojunction nanotubes by the heterogeneous nucleation and growth of Au on Te/Pt core-shell nanostructures in aqueous solution. The synthesized porous Au/PtAu bimetallic nanotubes (PABNTs) consist of porous tubular framework and attached Au nanoparticles (AuNPs). The reaction intermediates played an important role in the preparation, which fabricated the framework and provided a localized reducing agent for the reduction of the Au and Pt precursors. The Pt7 Au PABNTs showed higher electrocatalytic activity and durability in the oxygen-reduction reaction (ORR) in 0.1 M HClO4 than porous Pt nanotubes (PtNTs) and commercially available Pt/C. The mass activity of PABNTs was 218 % that of commercial Pt/C after an accelerated durability test. This study demonstrates the potential of PABNTs as highly efficient electrocatalysts. In addition, this method provides a facile strategy for the synthesis of desirable hetero-nanostructures with controlled size and shape by utilizing an intermediate template. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. Activities of Gaz de France Group

    International Nuclear Information System (INIS)

    Anon.

    2003-01-01

    The Board of Directors of Gaz de France approved the Group's consolidated accounts for 2004. In a more dynamic economic environment than in 2003, the Gaz de France Group reports enhanced results and has continued to pursue its growth in Europe. Increase in net sales driven by sustained growth in sales (+ 8.9%): In 2004, net sales rose 8.9% compared with the 2003 financial year to reach a total of euro 18,129 m. This strong increase in business activities was driven by sustained growth in sales volumes both in France and Europe. Total Group sales volumes amounted to 730 TWh (approximately 66 billion cubic metres), equal to growth of 10.3%. Natural gas sales volumes increased by approximately 10% in France, and are almost 18% higher in Europe, notably in the United Kingdom, Italy, Belgium and the Netherlands. The Group has pursued the profitable development of its activities outside France. As a result, international activities account for 29% of total sales in 2004, against 23% in 2003. The contribution made by international subsidiaries - particularly those specializing in exploration and production - grew by a very substantial 44.3% to reach a total of euro 502 m in 2004. Energy and Services Offering Branch: this core business line, which includes natural gas and oil exploration and production, energy trading and sales, and services associated with the supply of energy, boasts net sales of euro 16,498 m, equal to growth of 10.8% compared with 2003. Infrastructures Branch: this division, which groups together all activities related to the management of transmission and distribution infrastructures in both the French domestic and international markets, generated net sales of euro 6,794 m in 2004, virtually unchanged from the previous year. This situation is the result of higher sales generated by the distribution subsidiaries operating outside France (+9.2%) offset by a decline in the sales performance of the Transmission, Storage and Distribution in France

  2. Ecoulements intermittents de gaz et de liquide en conduite verticale Intermittent Gas and Liquid Flows in a Vertical Pipe.

    Directory of Open Access Journals (Sweden)

    Line A.

    2006-11-01

    Full Text Available Le modèle présenté ici permet la pré-détermination du gradient de pression, du taux global de gaz, et de grandeurs caractéristiques de l'intermittence, dans un écoulement à poches et bouchons en conduite verticale. L'écriture des lois de conservation en moyenne phasique conditionnelle conduit à la définition d'une cellule moyenne équivalente. La fermeture du modèle est assurée par des lois de contrainte de cisaillement film-paroi, film-poche, bouchon-paroi, par une loi d'arrachage du gaz au culot de la poche, une loi de glissement du gaz dans les bouchons et par une loi de la vitesse moyenne de propagation des fronts de poches. Le calibrage et la qualification du modèle s'appuient sur deux banques de données, dont l'une a été obtenue avec des fluides pétroliers dans des conditions proches des situations industrielles (boucle diphasique de Boussens. The model described here can be used to predetermine the pressure gradient, the overall gas rate and the characteristic intermittence magnitudes in pocket and slug flow in a vertical pipe. The way governing equations in the conditional phase average are written defines an equivalent average cell. The model is closed by film/wall, film/pocket and slug/wall shear-stress laws, by a pulloff law for the gas at the bottom of the pocket, a slippage law for the gas in the slugs, and a mean propagation velocity law for the pocket fronts. The calibration and qualification of the model are based on two data banks, one of which contains data on petroleum fluids under conditions close to industrial situations (two-phase loop at Boussens.

  3. EdF-Gaz de France. No merger without dismembering

    International Nuclear Information System (INIS)

    Lepetit, V.

    2007-01-01

    Gathering together the two historical French energy monopolies, Electricite de France (EdF) and Gaz de France (GdF), and warranting low electricity and gas prices is still an attractive idea for some political and syndicate representatives. However, such a merger would create a dominating position which is forbidden with respect to Brussels criteria. (J.S.)

  4. The results of Gaz de France in 1996

    International Nuclear Information System (INIS)

    Gadonneix, P.

    1997-01-01

    The principle results of the national company activity for 1996 have been presented by Mr Gadonneix, president of Gaz de France. These results will allow to face in the best economic conditions the realisation of the next contract which has to be signed with the government. Financial results, commercial results, supplies, transport and storage, distribution system, research and development are detailed. (N.C.)

  5. Fabrication of Te and Te-Au Nanowires-Based Carbon Fiber Fabrics for Antibacterial Applications

    Directory of Open Access Journals (Sweden)

    Ting-Mao Chou

    2016-02-01

    Full Text Available Pathogenic bacteria that give rise to diseases every year remain a major health concern. In recent years, tellurium-based nanomaterials have been approved as new and efficient antibacterial agents. In this paper, we developed the approach to directly grow tellurium nanowires (Te NWs onto commercial carbon fiber fabrics and demonstrated their antibacterial activity. Those Te NWs can serve as templates and reducing agents for gold nanoparticles (Au NPs to deposit. Three different Te-Au NWs with varied concentration of Au NPs were synthesized and showed superior antibacterial activity and biocompability. These results indicate that the as-prepared carbon fiber fabrics with Te and Te-Au NWs can become antimicrobial clothing products in the near future.

  6. Lead Telluride Doped with Au as a Very Promising Material for Thermoelectric Applications

    Directory of Open Access Journals (Sweden)

    Pantelija M. Nikolic

    2015-01-01

    Full Text Available PbTe single crystals doped with monovalent Au or Cu were grown using the Bridgman method. Far infrared reflectivity spectra were measured at room temperature for all samples and plasma minima were registered. These experimental spectra were numerically analyzed and optical parameters were calculated. All the samples of PbTe doped with Au or Cu were of the “n” type. The properties of these compositions were analyzed and compared with PbTe containing other dopants. The samples of PbTe doped with only 3.3 at% Au were the best among the PbTe + Au samples having the lowest plasma frequency and the highest mobility of free carriers-electrons, while PbTe doped with Cu was the opposite. Samples with the lowest Cu concentration of 0.23 at% Cu had the best properties. Thermal diffusivity and electronic transport properties of the same PbTe doped samples were also investigated using a photoacoustic (PA method with the transmission detection configuration. The results obtained with the far infrared and photoacoustic characterization of PbTe doped samples were compared and discussed. Both methods confirmed that when PbTe was doped with 3.3 at% Au, thermoelectric and electrical properties of this doped semiconductor were both significantly improved, so Au as a dopant in PbTe could be used as a new high quality thermoelectric material.

  7. Analysis of Simultaneous Gas-Liquid Flow Through an Orifice and Its Application to Flow Metering Etude de l'écoulement simultané d'un mélange gaz-liquide à travers un orifice et son application à la mesure du débit

    Directory of Open Access Journals (Sweden)

    Pascal H.

    2006-11-01

    Full Text Available The purpose of this article is to show a more accurate orifice equation for a two-phase flow, such a compressible mixture of gas and liquid. The orifice equation given here con be used for the measurement of a gas-liquid mixture of fine emulsions by the orificemeter method. From the thermodynamic point of view, an equation of state has been formulated which provides the relationship between the specific mass of the mixture and pressure, under conditions of adiabatic expansion. The results obtained enable the mass flow rates of gas and liquid ta be determined without separation of the phases, provided thot the gas liquid mass ratio is known. The critical pressure ratio corresponding ta sonic velocity is also determined. Cet article présente une relation plus précise pour l'écoulement d'un système à deux phases, tel qu'un mélange compressible gaz-liquide, à travers un diaphragme. Cette relation peut être utilisée pour des mesures de mélanges gaz-liquide très finement divisés, c'est-à-dire des émulsions ou brouillards, par la méthode du diaphragme en paroi mince. Du point de vue thermodynamique, on a formulé une équation d'état donnant la relation entre la masse spécifique du mélange et la pression dans des conditions d'expansion adiabatique. Les résultats obtenus per-mettent de déterminer le débit massique du gaz et du liquide, sans séparation des deux phases, à condition que le rapport de masse gaz-liquide soit connu. On détermine également le rapport de pression critique correspondantà la vitesse du son.

  8. Optimal use of the Gaz de France underground gas storage facilities; Utilisation optimale des stockages souterrains de Gaz de France

    Energy Technology Data Exchange (ETDEWEB)

    Favret, F.; Rouyer, E.; Bayen, D.; Corgier, B. [Gaz de France (GDF), 75 - Paris (France)

    2000-07-01

    This paper describes the tools developed by Gaz de France to optimize the use of its whole set of underground gas storage facilities. After a short introduction about the context and the purposes, the methodology and the models are detailed. The operational results obtained during the last three years are presented, and some conclusions and perspectives are given. (authors)

  9. Geochemical modeling of water-gas-rock interactions. Application to mineral diagenesis in geologic reservoirs; Modelisation geochimique des interactions eau-gaz-roche. Application a la diagenese minerale dans les reservoirs geologiques

    Energy Technology Data Exchange (ETDEWEB)

    Bildstein, O

    1998-03-13

    The Ph.D. report describes a conceptual and numerical model for simulating gas-water-rock interaction during mineral diagenesis of sediments. The main specific features of this model are the following: applicable to open systems, half-implicit resolution numerical method, feedback on the texture evolution (grain model), existence of a gas phase, oxido-reduction phenomena. (author) 217 refs.

  10. Apparatus for studying the diffusion of rare gases in stainless steel; Appareil pour etude de la diffusion des gaz rares dans l'acier inoxydable

    Energy Technology Data Exchange (ETDEWEB)

    Stohr, J A; Alfille, L [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1959-07-01

    This apparatus enables measurements to be carried out on the diffusion of gaseous fission products and of gases in general across thin metallic walls at high temperatures. This work was initially intended to solve the problems involved in systems for detecting the rupture of a fuel element can (D.R.G.) by the diffusion of fission products through the cans at high temperatures. The extension of the work to other fields is envisaged. (author) [French] Cet appareil permet d'effectuer des mesures sur la diffusion des produits de fission gazeux, et des gaz en general, au travers de parois metalliques minces a haute temperature. Au depart, ce procede devait contribuer a resoudre les problemes poses aux systemes detecteurs de rupture de gaine (D.R.G.), par la diffusion des produits de fission au travers des gaines de cartouches a haute temperature. Son extension a d'autres etudes est envisagee. (auteur)

  11. Synthesis of Au Nanostars and Their Application as Surface Enhanced Raman Scattering-Activity Tags Inside Living Cells.

    Science.gov (United States)

    Cao, Xiaowei; Shi, Chaowen; Lu, Wenbo; Zhao, Hang; Wang, Man; Tong, Wei; Dong, Jian; Han, Xiaodong; Qian, Weiping

    2015-07-01

    This work presents the synthesis and characterization of Au nanostars (AuNSs) and demonstrates their application as surface enhanced Raman scattering (SERS)-activity tags for cellular imaging and sensing. Nile blue A (NBA) and bovine serum albumin (BSA) were used as Raman reporter molecules and capping materials, respectively. The SERS-activity tags were tested on human lung adenocarcinoma cell (A549) and alveolar type II cell (AT II) and found to present a low level of cytotoxicity and high chemical stability. These SERS-activity tags not only can be applied in multiplexed cellular imaging, including dark field imaging, transmission electron microscopy (TEM) and SERS imaging, but also can be used for cellular sensing. The SERS spectra clearly identified cellular important components such as proteins, nucleic acids, lipids, and carbohydrates. This study also shows that endocytosis is the main channel of tags internalized in cells. The AuNSs exhibiting strong surface enhanced Raman effects are utilized in the design of an efficient, stable SERS-activity tag for intracellular applications.

  12. Characterization of self-assembled electrodes based on Au-Pt nanoparticles for PEMFC application

    Energy Technology Data Exchange (ETDEWEB)

    Valenzuela, E. [Politecnica Univ. de Chiapas, Tuxtla Gutierrez, Chiapas (Mexico). Energia y Sustentabilidad; Sebastian, P.J. [Politecnica Univ. de Chiapas, Chiapas (Mexico). Energia y Sustentabilidad; Centro de Investigacion en Energia, UNAM, Morelos (Mexico); Gamboa, S.A. [Centro de Investigacion en Energia, UNAM, Morelos (Mexico); Pal, U. [Inst. de Fisica, Universidad Autonoma de Puebla Univ., Puebla (Mexico). Inst. de Fisica; Gonzalez, I. [Autonoma Metropolitana Univ. (Mexico). Dept. de Quimica

    2008-07-01

    This paper reported on a study in which membrane electrode assemblies (MEAs) were fabricated by depositing Au, Pt and AuPt nanoparticles on Nafion 115 membrane for use in a proton exchange membrane fuel cell (PEMFC). A Rotating Disc Electrode (RDE) was used to measure the nanoparticle catalyst activity. After deposition of the nanoparticles on the membrane, the surface was studied by Scanning Electron Microscopy (SEM) and Energy Dispersive Spectroscopy (EDS). The membrane proton conduction process was studied by Electrochemical Impedance Spectroscopy (EIS) with the 4 probe technique. The MEAs fabricated with Nafion/Metal membranes were evaluated in a PEMFC under standard conditions. Colloidal solutions were used to prepare self-assembled electrodes with nanoparticles deposited on Nafion membrane. The particles deposited on Nafion showed good stability and had homogeneous distribution along the membrane surface. The impedance results revealed an increase in the membrane proton resistance of the self-assembled electrodes compared to unmodified Nafion. The Au-Pt nanoparticles were obtained by chemical reduction. The nanoparticle size in the three systems was about 2 nm. The self-assembled electrodes performed well in standard conditions. The optimum colloidal concentration and immersion time must be determined in order to obtain good catalytic activity and high membrane conductance. The self-assembled Nafion/AuPt had the best open circuit potential (887 mV). The Au and Pt self-assemblies showed a similar performance in terms of maximum power and maximum current density. The performance of the Nafion/Au self-assembly was influenced more by ohmic losses, particularly in the membrane. The maximum power generation was obtained at 0.35 V. The mass transport losses increased after this value, thereby affecting the efficiency of the PEMFC. 2 figs.

  13. Simultaneous AuIII Extraction and In Situ Formation of Polymeric Membrane-Supported Au Nanoparticles: A Sustainable Process with Application in Catalysis.

    Science.gov (United States)

    Mora-Tamez, Lucía; Esquivel-Peña, Vicente; Ocampo, Ana L; Rodríguez de San Miguel, Eduardo; Grande, Daniel; de Gyves, Josefina

    2017-04-10

    A polymeric membrane-supported catalyst with immobilized gold nanoparticles (AuNPs) was prepared through the extraction and in situ reduction of Au III salts in a one-step strategy. Polymeric inclusion membranes (PIMs) and polymeric nanoporous membranes (PNMs) were tested as different membrane-support systems. Transport experiments indicated that PIMs composed of cellulose triacetate, 2-nitrophenyloctyl ether, and an aliphatic tertiary amine (Adogen 364 or Alamine 336) were the most efficient supports for Au III extraction. The simultaneous extraction and reduction processes were proven to be the result of a synergic phenomenon in which all the membrane components were involved. Scanning electron microscopy characterization of cross-sectional samples suggested a distribution of AuNPs throughout the membrane. Transmission electron microscopy characterization of the AuNPs indicated average particle sizes of 36.7 and 2.9 nm for the PIMs and PNMs, respectively. AuNPs supported on PIMs allowed for >95.4 % reduction of a 0.05 mmol L -1 4-nitrophenol aqueous solution with 10 mmol L -1 NaBH 4 solution within 25 min. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  14. The merging of Suez and 'Gaz de France'

    International Nuclear Information System (INIS)

    Anon.

    2008-01-01

    The merging of 'Gaz de France' and Suez has been approved by the shareholders on the 16 july 2008, and the decree for the privatization of 'Gaz de France' has been published to the 'Journal Officiel'. The French state will hold 35.6% of the capital of the new group GDF-Suez. The board of directors will be composed of 24 members: 7 officials from the state, 1 representative of the share-holding staff, 3 representatives of the elected employees and 13 members named by the general assembly of the shareholders. This group, which is officially born on the 22. of july 2008, is the fourth bigger group worldwide in the domain of energy. (A.C.)

  15. Gaz Metropolitain's experience in regards to transmission access

    International Nuclear Information System (INIS)

    Noel, J.-P.

    1994-01-01

    The natural gas industry in Canada is briefly reviewed as it applies to the sale of transported gas in Quebec. The deregulation of the industry which occurred in 1985 brought many changes to the relationships among natural gas consumers, suppliers, transmission companies, and distribution utilities. It is noted that only the producers' natural gas sale price has been deregulated, not the rates of transmission companies or distributors. Deregulation offered two possibilities for natural gas users in Quebec: the client can contract a transmission service between the Alberta (source of supply) and Quebec borders, separately from contracting a delivery service from Gaz Metropolitain, the company supplying the vast majority of natural gas in Quebec; or the client can contract those two services from Gaz Metropolitain who then gathers the gas at the Alberta border. The adoption of Gaz Metropolitain services to meet the need for transmission access are discussed in the areas of supply contracts, and services offered (buy/sell, rate unbundling, delivery). The opportunities and risks for the customer are assessed in the areas of costs, speculation on transportation capacity, operational flexibility, and the possiblity of unused capacities. Opportunities and issues for the distributor include maintenance of client satisfaction, shortening of the duration of contracts, maintenance of the role of the distributor in natural gas sales, take-or-pay commitments, rate unbundling, accounting methods, inventories, and pricing

  16. Detection of radioactive gases in the CO{sub 2} cooling the reactors G 2 - G 3; Detection des gaz radioactifs dans le CO{sub 2} de refroidissement des piles G2 - G3

    Energy Technology Data Exchange (ETDEWEB)

    Pouthier, J; Rossi, J [Commissariat a l' Energie Atomique, Chusclan (France). Centre de Production de Plutonium de Marcoule

    1968-07-01

    The carbon dioxide cooling the reactors G2 - G3 contains activation gases and fission gases. It is of interest to know their concentration, for example to be able to deduce rapidly the norms which would have to be applied in the case of an incident in the circuit. Gas-phase chromatography is applied daily for carrying out analyses. The chromatogram has separate peaks due to tritium, argon 41, krypton 85 and the 133 and 135 isotopes of xenon. By integrating each peak it is possible to calculate the specific activity of each product. The construction of an apparatus for carrying out continuous measurements is under consideration. (authors) [French] Le gaz carbonique, refroidissant les reacteurs G2 - G3, contient des gaz d'activation et des gaz de fission. Il est interessant de connaitre leur teneur par exemple pour etre en mesure de deduire rapidement les normes qu'il y aurait lieu d'appliquer en cas d'incidents sur le circuit. La methode de chromatographie en phase gazeuse est employee quotidiennement pour faire des analyses. Le chromatogramme se presente sous forme de pics distincts dus au tritium, a l'argon 41, au krypton 85 et aux isotopes 133 et 135 du xenon. L'integration de chaque pic permet de calculer l'activite specifique de chaque compose. Il est envisage de construire un appareil pour des mesures en continu. (auteurs)

  17. Approximate treatment of semicore states in GW calculations with application to Au clusters.

    Science.gov (United States)

    Xian, Jiawei; Baroni, Stefano; Umari, P

    2014-03-28

    We address the treatment of transition metal atoms in GW electronic-structure calculations within the plane-wave pseudo-potential formalism. The contributions of s and p semi-core electrons to the self-energy, which are essential to grant an acceptable accuracy, are dealt with using a recently proposed scheme whereby the exchange components are treated exactly at the G0W0 level, whereas a suitable approximation to the correlation components is devised. This scheme is benchmarked for small gold nano-clusters, resulting in ionization potentials, electron affinities, and density of states in very good agreement with those obtained from calculations where s and p semicore states are treated as valence orbitals, and allowing us to apply this same scheme to clusters of intermediate size, Au20 and Au32, that would be otherwise very difficult to deal with.

  18. Approximate treatment of semicore states in GW calculations with application to Au clusters

    Energy Technology Data Exchange (ETDEWEB)

    Xian, Jiawei [SISSA – Scuola Internazionale Superiore di Studi Avanzati, Via Bonomea 265, I-34136 Trieste (Italy); Baroni, Stefano [SISSA – Scuola Internazionale Superiore di Studi Avanzati, Via Bonomea 265, I-34136 Trieste (Italy); CNR-IOM Democritos, Theory-Elettra group, Trieste (Italy); Umari, P., E-mail: paolo.umari@unipd.it [CNR-IOM Democritos, Theory-Elettra group, Trieste (Italy); Dipartimento di Fisica e Astronomia, Università di Padova, Via Marzolo 8, I-35131 Padova (Italy)

    2014-03-28

    We address the treatment of transition metal atoms in GW electronic-structure calculations within the plane-wave pseudo-potential formalism. The contributions of s and p semi-core electrons to the self-energy, which are essential to grant an acceptable accuracy, are dealt with using a recently proposed scheme whereby the exchange components are treated exactly at the G{sub 0}W{sub 0} level, whereas a suitable approximation to the correlation components is devised. This scheme is benchmarked for small gold nano-clusters, resulting in ionization potentials, electron affinities, and density of states in very good agreement with those obtained from calculations where s and p semicore states are treated as valence orbitals, and allowing us to apply this same scheme to clusters of intermediate size, Au{sub 20} and Au{sub 32}, that would be otherwise very difficult to deal with.

  19. Approximate treatment of semicore states in GW calculations with application to Au clusters

    International Nuclear Information System (INIS)

    Xian, Jiawei; Baroni, Stefano; Umari, P.

    2014-01-01

    We address the treatment of transition metal atoms in GW electronic-structure calculations within the plane-wave pseudo-potential formalism. The contributions of s and p semi-core electrons to the self-energy, which are essential to grant an acceptable accuracy, are dealt with using a recently proposed scheme whereby the exchange components are treated exactly at the G 0 W 0 level, whereas a suitable approximation to the correlation components is devised. This scheme is benchmarked for small gold nano-clusters, resulting in ionization potentials, electron affinities, and density of states in very good agreement with those obtained from calculations where s and p semicore states are treated as valence orbitals, and allowing us to apply this same scheme to clusters of intermediate size, Au 20 and Au 32 , that would be otherwise very difficult to deal with

  20. Characterization of self-assembled electrodes based on Au-Pt nanoparticles for PEMFC application

    Energy Technology Data Exchange (ETDEWEB)

    Valenzuela, E. [Univ. Politecnica de Chiapas (Mexico). Energia y Sustentabilidad; Sebastian, P.J.; Gamboa, S.A.; Joseph, S. [Univ. Nacional Autonoma de Mexico, Morelos (Mexico). Centrode Investigacion en Energia; Pal, U. [Univ. Autonoma de Puebla, Pue (Mexico). Inst. de Fisica; Gonzalez, I. [Univ. Autonoma Metropolitana, Mexico City (Mexico). Dept. de Quimica

    2010-07-01

    This paper described the synthesis and characterization of gold (Au), platinum (Pt) and Au-Pt nanoparticles impregnated on a Nafion membrane in a proton exchange membrane fuel cell (PEMFC). The aim of the study was to fabricate the membrane electrode assembly (MEA) by depositing the nanoparticles on the membrane using an immersion technique. Scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) were used to study the deposition process. Electrochemical impedance spectroscopy (EIS) was used to study the membrane proton conduction process. An elemental mapping analysis was performed in order to study the location of the Au and Pt in the self-assemblies. Results of the study showed that the particles deposited on the Nafion had good stability and a homogenous distribution along the membrane surface. The particles showed a direct relation in size and location with the hydrophilic and hydrophobic distribution phases of the membrane. The main membrane resistance was located between the membrane and the electrolyte. The self-assembled electrodes demonstrated a good performance at standard conditions. 33 refs., 4 tabs., 11 figs.

  1. Partially and fully de-alloyed glassy ribbons based on Au: Application in methanol electro-oxidation studies

    Energy Technology Data Exchange (ETDEWEB)

    Paschalidou, Eirini Maria, E-mail: epaschal@unito.it [Dipartimento di Chimica e Centro Interdipartimentale NIS (Nanostructured Surfaces and Interfaces), Università di Torino, Via Pietro Giuria 7, 10125, Torino (Italy); Scaglione, Federico [Dipartimento di Chimica e Centro Interdipartimentale NIS (Nanostructured Surfaces and Interfaces), Università di Torino, Via Pietro Giuria 7, 10125, Torino (Italy); Gebert, Annett; Oswald, Steffen [Leibniz Institut für Festkörper- und Werkstoffforschung IFW, Helmholtzstraße 20, 01069, Dresden (Germany); Rizzi, Paola; Battezzati, Livio [Dipartimento di Chimica e Centro Interdipartimentale NIS (Nanostructured Surfaces and Interfaces), Università di Torino, Via Pietro Giuria 7, 10125, Torino (Italy)

    2016-05-15

    In this work, electrochemical de-alloying of an amorphous alloy, Au{sub 40}Cu{sub 28}Ag{sub 7}Pd{sub 5}Si{sub 20}, cast in ribbon form by melt spinning, has been performed, obtaining self standing nanoporous materials suitable for use as electrodes for electrocatalytic applications. The de-alloying encompasses removal of less noble elements and the crystallization of Au, resulting in interconnected ligaments whose size and morphology are described as a function of time. Depending on de-alloying time, the crystals may contain residual amounts of Cu, Ag and Pd, as shown by Auger Electron Spectroscopy (AES), Energy Dispersive Spectroscopy (EDS) and Cyclic Voltammetry (CV) in a basic solution. Current density peaks in the 0.16–0.28 V range (vs Ag/AgCl) indicate that the porous ribbons are active for the electro-oxidation of methanol. The partially de-alloyed samples, which still partially contain the amorphous phase because of the shorter etching times, have finer ligaments and display peaks at lower potential. However, the current density decreases rapidly during repeated potential scans. This is attributed to the obstruction of Au sites, mainly by the Cu oxides formed during the scans. The fully de-alloyed ribbons display current peaks at about 0.20 V and remain active for hundreds of scans at more than 60% of the initial current density. They can be fully re-activated to achieve the same performance levels after a brief immersion in nitric acid. The good activity is due to trapped Ag and Pd atoms in combination with ligament morphology. - Graphical abstract: Fine ligaments and pores made by de-alloying a glassy ribbon of a Au-based alloy, homogeneously produced across the thickness (25 μm) for studying methanol's electro-oxidation behavior. - Highlights: • Size and composition of nanoporous layers tailored in de-alloying Au-based glassy ribbons. • From amorphous precursor fine crystals occur in ligaments with residual Pd and Ag. • Fully de

  2. Development of the control assembly pattern and dynamic analysis of the generation IV large gas-cooled fast reactor (GFR); Developpement du design d'un assemblage de controle et analyse dynamique des reacteurs a neutrons rapides de quatrieme generation refroidis au gaz

    Energy Technology Data Exchange (ETDEWEB)

    Girardin, G.

    2009-07-09

    Among the systems selected by the GIF, the Gas-cooled Fast Reactor (GFR) is a highly innovative system with advanced fuel geometry and materials. It is in the context of the large, 2400 MWth reference GFR design that the present doctoral research has been conducted, the principal aim having been to develop and qualify the control assembly (CA) pattern and corresponding CA implementation scheme for this system. The work has been carried out in three successive and complementary phases: (1) validation of the neutronics tools, (2) the CA pattern development and related static analysis, and (3) dynamic core behavior studies for hypothetical CA driven transients. During the first phase of the thesis, the reference PROTEUS test lattice from these experiments has been analyzed with ERANOS-2.0 and its associated, adjusted nuclear data library ERALIB1. Additionally, benchmark calculations were performed with the Monte Carlo code MCNPX, allowing one to both check the deterministic results and to analyze the sensitivity to different modern data libraries. It has been found that, for the main reaction rate ratios, the new analysis of the GCFR-PROTEUS reference lattice generally yields good agreement - within 1{sigma} measurement uncertainty - with experimental values and with the Monte Carlo simulations. As shown by the analysis, the predictions were in somewhat better agreement in the case of the adjusted ERALIB1 library. The applicability of ERANOS-2.0/ERALIB1 as the reference neutronics tool for the GFR analysis could thus be demonstrated. Furthermore, neutronics aspects related to the novel features of the GFR, for which new experimental investigations are needed, were highlighted. In the second phase of the research, the CA pattern was developed for the GFR, based on iterative neutronics and thermal-hydraulics calculations, 2D and 3D neutronics models for the reactor core having first been set up using the reference ERANOS-2.0/ERALIB1 computational scheme. For the thermal

  3. Electrogenerated Chemiluminescence Behavior of Au nanoparticles-hybridized Pb (II) metal-organic framework and its application in selective sensing hexavalent chromium.

    Science.gov (United States)

    Ma, Hongmin; Li, Xiaojian; Yan, Tao; Li, Yan; Liu, Haiyang; Zhang, Yong; Wu, Dan; Du, Bin; Wei, Qin

    2016-02-23

    In this work, a novel electrochemiluminescence (ECL) sensor based on Au nanoparticles-hybridized Pb (II)-β-cyclodextrin (Pb-β-CD) metal-organic framework for detecting hexavalent chromium (Cr(VI)) was developed. Pb-β-CD shows excellent ECL behavior and unexpected reducing ability towards Au ions. Au nanoparticles could massively form on the surface of Pb-β-CD (Au@Pb-β-CD) without use of any additional reducing agent. In the presence of coreactant K2S2O8, the ECL emission of Pb-β-CD was enhanced by the formation of Au nanoparticles. Cr(VI) can collisionally quench the ECL behavior of Au@Pb-β-CD/S2O8(2-) system and the detection mechanism was investigated. This ECL sensor is found to have a linear response in the range of 0.01-100 μM and a low detection limit of 3.43 nM (S/N = 3) under the optimal conditions. These results suggest that metal-organic framework Au@Pb-β-CD has great potential in extending the application in the ECL field as an efficient luminophore.

  4. A contribution from Gaz de France to the economic performance of industries; Contribution de Gaz de France a la perfomance economique des industriels

    Energy Technology Data Exchange (ETDEWEB)

    Depail, J.C. [Gaz de France (GDF), 75 - Paris (France)

    1996-12-31

    The aim of the policy of the French national gas utility, Gaz de France, towards industries, is to promote natural gas as a competitive fuel compared to fuels and electric power, with energy efficient solutions that are easy to implement and maintain: space heating, paint curing, surface cleaning, bath heating, vapour generation, waste treatment (especially for molding sand and volatile organic compounds, sludge drying). Gaz de France proposes also expertise schemes and audits

  5. Spatial flux instabilities, and their control in the graphite gas power reactors; Les instabilites spatiales du flux et leur controle dans les reacteurs de puissance graphite-gaz

    Energy Technology Data Exchange (ETDEWEB)

    Cailly, J L [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    Radial-azimuthal and axial spatial flux instabilities in graphite-gas reactors are studied by means of an analytical approach. Results are checked with those which are given by two dimensional (r, z and r, {theta}) kinetic models programmed for an IBM 7094 computer. At least, conclusions on the control of instabilities obtained from these models are reported. (author) [French] Les instabilites spatiales du flux dans les reacteurs graphite-gaz, radiales et azimutales d'une part, axiales d'autre part, sont etudiees au moyen d'une formulation analytique. Les resultats sont confrontes avec ceux que fournissent des modeles cinetiques a deux dimensions (r, z et r, {theta}) programmes sur IBM 7094. On donne enfin les conclusions relatives au controle de ces instabilites que ces modeles ont permis de degager. (auteur)

  6. Mass-spectrometric analysis of trace oxygen in carbon dioxide; Analyse de traces d'oxygene dans le gaz carbonique par spectrometrie de masse

    Energy Technology Data Exchange (ETDEWEB)

    Nief, G; Severin, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1961-07-01

    The mass spectrum of pure CO{sub 2} contains a peak of weight 32 whose relationship to peak at 44 varies greatly depending on the previous history of the source of ions and even during the course of an analysis. The fact that this peak is more or less proportional to the pressure and that its appearance potential is the same as that of oxygen leads us to suppose that it is produced from oxygen formed by dissociation of the carbon dioxide on the tungsten filament. A prior treatment of the ion source with acetylene reduces the ratio 32/44 to a value of about 15.10{sup -5}. This same treatment also stabilises the spectrometer's sensitivity to oxygen. Two lines of introduction enable pure carbon dioxide, the specimen to be estimated and a reference mixture of known oxygen content to be sent into the mass spectrometer in quick succession. Oxygen in the carbon dioxide in amounts ranging between 0 and 500 p.p.m. can thus be determined to an accuracy of {+-} 5 p.p.m., the analysis taking 30 minutes. (author) [French] Le spectre de masse de CO{sub 2} pur contient un pic de masse 32 dont le rapport au pic 44 varie enormement suivant l'histoire anterieure de la source d'ions et meme au cours d'une analyse. Le fait que ce pic soit grossierement proportionnel a la pression et que son potentiel d'apparition soit le meme que celui de l'oxygene permet de supposer qu'il est engendre a partir de l'oxygene produit par dissociation du gaz carbonique sur le filament de tungstene. Un conditionnement prealable de la source d'ions avec de l'acetylene reduit le rapport 32/44 a une valeur d'environ 15.10{sup -5}. Ce meme traitement stabilise egalement la sensibilite du spectrometre vis-a-vis de l'oxygene. Une double ligne d'introduction de gaz permet d'envoyer en successions rapides dans le spectrometre de masse le gaz carbonique pur, l'echantillon a doser et un melange de reference de teneur en oxygene connue. On arrive ainsi a doser l'oxygene dans le gaz carbonique dans la gamme de 0 a

  7. Synthesis by picosecond laser ablation of ligand-free Ag and Au nanoparticles for SERS applications

    Science.gov (United States)

    Fazio, Enza; Spadaro, Salvatore; Santoro, Marco; Trusso, Sebastiano; Lucotti, Andrea.; Tommasini, Matteo.; Neri, Fortunato; Maria Ossi, Paolo

    2018-01-01

    The morphological and optical properties of noble metal nanoparticles prepared by picosecond laser generated plasmas in water were investigated. First, the ablation efficiency was maximized searching the optimal focusing conditions. The nanoparticle size, measured by Scanning Transmission Electron Microscopy, strongly depends on the laser fluence, keeping fixed the other deposition parameters such as the target to scanner objective distance and laser repetition frequency. STEM images indicate narrow gradients of NP sizes. Hence the optimization of ablation parameters favours a fine tuning of nanoparticles. UV-Visible spectroscopy helped to determine the appropriate laser wavelength to resonantly excite the localized surface plasmon to carry out Surface Enhanced Raman Scattering (SERS) measurements. The SERS activity of Ag and Au substrates, obtained spraying the colloids synthesized in water, was tested using crystal violet as a probe molecule. The good SERS performance, observed at excitation wavelength 785 nm, is attributed to aggregation phenomena of nanoparticles sprayed on the support.

  8. Mortal waiting for EdF and Gaz de France

    International Nuclear Information System (INIS)

    Jemain, A.

    2003-01-01

    Electricite de France (EdF) and Gaz de France (GdF) utilities have announced important investment programs for the forthcoming opening of gas and electricity markets to 2.5 millions of professionals by July 1, 2004. However, nothing can be done before the approval of the French government has been given for the change of their statuses (from the industrial and commercial public company status to the anonymous company status) and for the opening of their capital. Short paper. (J.S.)

  9. Novel electrochemical redox-active species: one-step synthesis of polyaniline derivative-Au/Pd and its application for multiplexed immunoassay

    Science.gov (United States)

    Wang, Liyuan; Feng, Feng; Ma, Zhanfang

    2015-11-01

    Electrochemical redox-active species play crucial role in electrochemically multiplexed immunoassays. A one-pot method for synthesizing four kinds of new electrochemical redox-active species was reported using HAuCl4 and Na2PdCl4 as dual oxidating agents and aniline derivatives as monomers. The synthesized polyaniline derivative-Au/Pd composites, namely poly(N-methyl-o-benzenediamine)-Au/Pd, poly(N-phenyl-o-phenylenediamine)-Au/Pd, poly(N-phenyl-p-phenylenediamine)-Au/Pd and poly(3,3’,5,5’-tetramethylbenzidine)-Au/Pd, exhibited electrochemical redox activity at -0.65 V, -0.3 V, 0.12 V, and 0.5 V, respectively. Meanwhile, these composites showed high H2O2 electrocatalytic activity because of the presence of Au/Pd. The as-prepared composites were used as electrochemical immunoprobes in simultaneous detection of four tumor biomarkers (carcinoembryonic antigen (CEA), carbohydrate antigen 19-9 (CA199), carbohydrate antigen 72-4 (CA724), and alpha fetoprotein (AFP)). This immunoassay shed light on potential applications in simultaneous gastric cancer (related biomarkers: CEA, CA199, CA724) and liver cancer diagnosis (related biomarkers: CEA, CA199, AFP). The present strategy to the synthesize redox species could be easily extended to other polymers such as polypyrrole derivatives and polythiophene derivatives. This would be of great significance in the electrochemical detection of more analytes.

  10. Crystallographic investigation of Au nanoparticles embedded in a SrTiO{sub 3} thin film for plasmonics applications by means of synchrotron radiation

    Energy Technology Data Exchange (ETDEWEB)

    Pincini, Davide, E-mail: davide.pincini@mail.polimi.it [European Synchrotron Radiation Facility, CS 40220, 71, avenue des Martyrs, F-38043 Grenoble Cedex 9 (France); Dipartimento di Fisica, Politecnico di Milano, Piazza Leonardo Da Vinci 32, 20133 Milano (Italy); Mazzoli, Claudio [Dipartimento di Fisica, Politecnico di Milano, Piazza Leonardo Da Vinci 32, 20133 Milano (Italy); Bernhardt, Hendrik; Katzer, Christian; Schmidl, Frank [Institut für Festkörperphysik, Friedrich-Schiller-Universität Jena, Helmholtzweg 5, 07743 Jena (Germany); Uschmann, Ingo [Institut für Optik und Quantenelektronik, Friedrich-Schiller-Universität Jena, Max-Wien-Platz 1, 07743 Jena (Germany); Detlefs, Carsten [European Synchrotron Radiation Facility, CS 40220, 71, avenue des Martyrs, F-38043 Grenoble Cedex 9 (France)

    2015-03-14

    Self-organized monocrystalline Au nanoparticles with potential applications in plasmonics are grown in a SrTiO{sub 3} matrix by a novel two-step deposition process. The crystalline preferred orientation of these Au nanoparticles is investigated by synchrotron hard x-ray diffraction. Nanoparticles preferentially align with the (111) direction along the substrate normal (001), whereas two in-plane orientations are found with [110]{sub SrTiO{sub 3}}∥[110]{sub Au} and [100]{sub SrTiO{sub 3}}∥[110]{sub Au}. Additionally, a smaller diffraction signal from nanoparticles with the (001) direction parallel to the substrate normal (001) is observed; once again, two in-plane orientations are found, with [100]{sub SrTiO{sub 3}}∥[100]{sub Au} and [100]{sub SrTiO{sub 3}}∥[110]{sub Au}. The populations of the two in-plane orientations are found to depend on the thickness of the gold film deposited in the first step of the growth.

  11. Rapid synthesis and characterization of hybrid ZnO@Au core–shell nanorods for high performance, low temperature NO{sub 2} gas sensor applications

    Energy Technology Data Exchange (ETDEWEB)

    Ponnuvelu, Dinesh Veeran [Nanosensor Laboratory, PSG Institute of Advanced Studies, Coimbatore 641 004 (India); Pullithadathil, Biji, E-mail: bijuja123@yahoo.co.in [Nanosensor Laboratory, PSG Institute of Advanced Studies, Coimbatore 641 004 (India); Prasad, Arun K.; Dhara, Sandip [Surface and Nanoscience Division, Indira Gandhi Center for Atomic Research, Kalpakkam (India); Ashok, Anuradha [Nanosensor Laboratory, PSG Institute of Advanced Studies, Coimbatore 641 004 (India); Mohamed, Kamruddin; Tyagi, Ashok Kumar [Surface and Nanoscience Division, Indira Gandhi Center for Atomic Research, Kalpakkam (India); Raj, Baldev [Nanosensor Laboratory, PSG Institute of Advanced Studies, Coimbatore 641 004 (India)

    2015-11-15

    Graphical abstract: - Highlights: • Hybrid ZnO@Au core–shell nanorods were developed using rapid chemical method that can be used as a high performance, low temperature NO{sub 2} gas sensor. • Surface defect analysis (PL and XPS) clearly illustrates the presence of surface oxygen species and Zn interstitials involved in charge transport properties in-turn affecting gas sensing properties. • Hybrid ZnO@Au core–shell nanorods establish enhanced gas sensing performance at 150 °C compared to ZnO (300 °C) with a lower detection limit of 500 ppb using conventional electrodes. • The enhanced performance of ZnO@Au core–shell nanorods based sensor was owing to the presence of Au nanoclusters on the surface of ZnO nanorods which is attributed to the formation of Schottky contacts at the interfaces leading to sensitization effects. • The hybrid material found to be selective toward NO{sub 2} gas and highly stable in nature. - Abstract: A rapid synthesis route for hybrid ZnO@Au core–shell nanorods has been realized for ultrasensitive, trace-level NO{sub 2} gas sensor applications. ZnO nanorods and hybrid ZnO@Au core–shell nanorods are structurally analyzed using X-ray diffraction (XRD), high resolution transmission electron microscopy (HR-TEM) and X-ray photoelectron spectroscopy (XPS). Optical characterization using UV–visible (UV–vis), photoluminescence (PL) and Raman spectroscopies elucidate alteration in the percentage of defect and charge transport properties of ZnO@Au core–shell nanorods. The study reveals the accumulation of electrons at metal–semiconductor junctions leading to upward band bending for ZnO and thus favors direct electron transfer from ZnO to Au nanoclusters, which mitigates charge carrier recombination process. The operating temperature of ZnO@Au core–shell nanorods based sensor significantly decreased to 150 °C compared to alternate NO{sub 2} sensors (300 °C). Moreover, a linear sensor response in the range of 0.5–5

  12. World Gas Prospects: Which Role for the Middle East? Perspectives mondiales du gaz naturel : quel rôle pourrait jouer le Moyen-Orient ?

    Directory of Open Access Journals (Sweden)

    Chabrelie M. F.

    2006-12-01

    Full Text Available Since the early 1970s, the policies of energy diversification that have been implemented in the industrialized countries and in many developing countries have enabled natural gas to regularly increase its role in the world energy balance. Thus, during the past twenty years, natural gas recorded the highest growth rate among fossil fuels, and its share in the energy market has gradually risen from 18. 9% in 1975 to 23% in 1997. Today, thanks to favorable economic and environmental factors, natural gas has become the fuel of choice on many markets. Indeed, gas is blessed with a certain number of favorable assets (abundant reserves, flexibility, high-performance uses which give it a major role in all energy demand forecast scenarios. The most spectacular development will indisputably take place in the power generation sector. Endowed with a considerable gas potential, the Middle East will represent an essential source of supply for many industrialized countries and several gas export projects, either by LNG tanker or by pipelines are currently being contemplated. During the past decade, the contribution of natural gas to the energy mix also grew substantially in most Middle Eastern countries. The increase in gas demand should continue at a sustained rate, mainly driven by the power generation sector, petrochemicals and energy consumption by the hydrocarbons industry. These promising prospects for gas demand in most of the markets in the region might lead to the development of an intra-regional network. However, although opportunities exist, the region will have to meet many challenges in order to contribute more largely to the world gas balance in the years to come. de diversification énergétique mises en Suvre dans les pays industrialisés et dans de nombreux pays en voie de développement depuis le début des années 1970 ont permis au gaz naturel d'accroître régulièrement sa présence dans le bilan énergétique mondial. Ainsi, au cours des

  13. Gaz Metropolitain 2002 report : connecting with the future

    International Nuclear Information System (INIS)

    2003-01-01

    Gaz Metropolitain is the major natural gas distributor in Quebec. In 2002, the utility had its best year ever in terms of Partners' income of $154.6 million, representing a 9.5 per cent increase from 2001. Income from its core business, the distribution of natural gas in Quebec and Vermont, was $7.5 million higher than in 2001. This increase in income was due in part to better transportation and load balancing transactions. The main business effort in 2002 was on cogeneration plant projects developed with Boralex and Hydro Quebec. The projects, however, were not retained. This annual report presented consolidated financial and operating data for the distribution and transmission sectors of the company. It included information about Gaz Metropolitain's customers, the transmission and supply system, mission objectives, partnerships, corporate structure, and the year in review. The consolidated financial statements included income and cash flows, consolidated normalized volumes, and consolidated balance sheets. Revenue and expenditure statements were summarized by source. tabs., figs

  14. A highly sensitive pressure sensor using a Au-patterned polydimethylsiloxane membrane for biosensing applications

    International Nuclear Information System (INIS)

    Liu, Xinchuan; Zhu, Yihao; Nomani, Md W; Koley, Goutam; Wen, Xuejun; Hsia, Tain-Yen

    2013-01-01

    We report on the fabrication and characterization of a highly sensitive pressure sensor using a Au film patterned on a polydimethylsiloxane (PDMS) membrane. The strain-induced change in the film resistance was utilized to perform the quantitative measurement of absolute pressure. The highest sensitivity obtained for a 200 µm thick PDMS film sensor was 0.23/KPa with a range of 50 mm Hg, which is the best result reported so far, over that range, for any pressure sensor on a flexible membrane. The noise-limited pressure resolution was found to be 0.9 Pa (0.007 mm Hg), and a response time of ∼200 ms, are the best reported results for these sensors. The ultrahigh sensitivity is attributed to the strain-induced formation of microcracks, the effect of which on the resistance change was found to be highly reversible within a certain pressure range. A physical model correlating the sensitivity with the sensor parameters and crack geometry has been proposed. (paper)

  15. Experimental contribution to the study of gas bearings; Contribution experimentale a l'etude des paliers a gaz

    Energy Technology Data Exchange (ETDEWEB)

    Gobert, G

    1962-07-01

    Developments for gas-lubricated bearings are discussed. The study of how the fluid film behaves compared to what one can expect is discussed. Various devices are described which have allowed us to go up to peripheral velocity greater than 400 m/s, leading to rotational speed of several thousand revolutions per second. This is obtained by using an automatic setting for the distance between fixed and rotating walls. (author) [French] Le present travail debute par un apercu de l'etat actuel des connaissances sur le processus de la lubrification, notamment sur les paliers a lubrification par gaz. Apres une analyse effectuee au moyen des recentes theories de R. Comolet sur le film fluide entre disques paralleles, nous decrivons des machines dont les charges axiales et radiales specialement etudiees ont permis, au moyen d'un reglage automatique des jeux entre parois fixes et parois tournantes, d'atteindre des vitesses peripheriques superieures a 400 m/s correspondant a des vitesses de plusieurs milliers de tours par seconde. (auteur)

  16. Experimental contribution to the study of gas bearings; Contribution experimentale a l'etude des paliers a gaz

    Energy Technology Data Exchange (ETDEWEB)

    Gobert, G

    1962-07-01

    Developments for gas-lubricated bearings are discussed. The study of how the fluid film behaves compared to what one can expect is discussed. Various devices are described which have allowed us to go up to peripheral velocity greater than 400 m/s, leading to rotational speed of several thousand revolutions per second. This is obtained by using an automatic setting for the distance between fixed and rotating walls. (author) [French] Le present travail debute par un apercu de l'etat actuel des connaissances sur le processus de la lubrification, notamment sur les paliers a lubrification par gaz. Apres une analyse effectuee au moyen des recentes theories de R. Comolet sur le film fluide entre disques paralleles, nous decrivons des machines dont les charges axiales et radiales specialement etudiees ont permis, au moyen d'un reglage automatique des jeux entre parois fixes et parois tournantes, d'atteindre des vitesses peripheriques superieures a 400 m/s correspondant a des vitesses de plusieurs milliers de tours par seconde. (auteur)

  17. Fabricating a Homogeneously Alloyed AuAg Shell on Au Nanorods to Achieve Strong, Stable, and Tunable Surface Plasmon Resonances

    KAUST Repository

    Huang, Jianfeng

    2015-08-13

    Colloidal metal nanocrystals with strong, stable, and tunable localized surface plasmon resonances (SPRs) can be useful in a corrosive environment for many applications including field-enhanced spectroscopies, plasmon-mediated catalysis, etc. Here, a new synthetic strategy is reported that enables the epitaxial growth of a homogeneously alloyed AuAg shell on Au nanorod seeds, circumventing the phase segregation of Au and Ag encountered in conventional synthesis. The resulting core–shell structured bimetallic nanorods (AuNR@AuAg) have well-mixed Au and Ag atoms in their shell without discernible domains. This degree of mixing allows AuNR@AuAg to combine the high stability of Au with the superior plasmonic activity of Ag, thus outperforming seemingly similar nanostructures with monometallic shells (e.g., Ag-coated Au NRs (AuNR@Ag) and Au-coated Au NRs (AuNR@Au)). AuNR@AuAg is comparable to AuNR@Ag in plasmonic activity, but that it is markedly more stable toward oxidative treatment. Specifically, AuNR@AuAg and AuNR@Ag exhibit similarly strong signals in surface-enhanced Raman spectroscopy that are some 30-fold higher than that of AuNR@Au. When incubated with a H2O2 solution (0.5 m), the plasmonic activity of AuNR@Ag immediately and severely decayed, whereas AuNR@AuAg retained its activity intact. Moreover, the longitudinal SPR frequency of AuNR@AuAg can be tuned throughout the red wavelengths (≈620–690 nm) by controlling the thickness of the AuAg alloy shell. The synthetic strategy is versatile to fabricate AuAg alloyed shells on different shaped Au, with prospects for new possibilities in the synthesis and application of plasmonic nanocrystals.

  18. Molecular beam epitaxy of GaAs nanowires and their sustainability for optoelectronic applications. Comparing Au- and self-assisted growth methods

    Energy Technology Data Exchange (ETDEWEB)

    Breuer, Steffen

    2011-09-28

    In this work the synthesis of GaAs nanowires by molecular beam epitaxy (MBE) using the vapour-liquid-solid (VLS) mechanism is investigated. A comparison between Au- and self-assisted VLS growth is at the centre of this thesis. While the Au-assisted method is established as a versatile tool for nanowire growth, the recently developed self-assisted variation results from the exchange of Au by Ga droplets and thus eliminates any possibility of Au incorporation. By both methods, we achieve nanowires with epitaxial alignment to the Si(111) substrates. Caused by differences during nanowire nucleation, a parasitic planar layer grows between the nanowires by the Au-assisted method, but can be avoided by the self-assisted method. Au-assisted nanowires grow predominantly in the metastable wurtzite crystal structure, while their self-assisted counterparts have the zincblende structure. All GaAs nanowires are fully relaxed and the strain arising from the lattice mismatch between GaAs and Si of 4.1 % is accommodated by misfit dislocations at the interface. Self-assisted GaAs nanowires are generally found to have vertical and non-polar side facets, while tilted and polar nanofacets were described for Au-assisted GaAs nanowires. We employ VLS nucleation theory to understand the effect of the droplet material on the lateral facets. Optoelectronic applications require long minority carrier lifetimes at room temperature. We fabricate GaAs/(Al,Ga)As core-shell nanowires and analyse them by transient photoluminescence (PL) spectroscopy. The results are 2.5 ns for the self-assisted nanowires as well as 9 ps for the Au-assisted nanowires. By temperature-dependent PL measurements we find a characteristic activation energy of 77 meV that is present only in the Au-assisted nanowires. We conclude that most likely Au is incorporated from the droplets into the GaAs nanowires and acts as a deep, non-radiative recombination centre.

  19. RESOLUTION DU PROBLEME DE PREDICTION LINEAIRE PAR LA METHODE ULV. APPLICATION AU SIGNAL FID

    Directory of Open Access Journals (Sweden)

    M KHELIF

    2003-06-01

    Full Text Available Dans le cadre de la spectroscopie RMN, notre objectif est de déterminer le spectre d'absorption du signal de précession libre FID par la méthode de prédiction linéaire (PL. Ceci revient à résoudre le problème de prédiction linéaire en exploitant la méthode de corrélation par l'utilisation de la décomposition en valeurs singulières SVD pour l'inversion de la matrice de corrélation. Or, cette technique est la source d'un certain nombre de problèmes lorsque le signal est noyé dans du bruit. Aussi sera-t-elle coûteuse en temps lorsque les dimensions de la matrice de corrélation sont importantes. Afin de résoudre ce problème, nous exploitons les propriétés d'une nouvelle technique dérivée de la SVD, la décomposition ULV pour minimiser le coût du traitement et assurer une inversion correcte de la matrice de corrélation. Dans ce but, nous déterminons le spectre d'absorption par la technique ULV et nous le comparons avec le spectre déterminé par la SVD et  la FFT. Nous comparons par la suite la qualité des spectres obtenus par rapport au spectre d'absorption idéal  déterminé par FFT.

  20. Contribution to the study of the fission-gas release in metallic nuclear fuels; Contribution a l'etude du degagement des gaz de fission dans les combustibles nucleaires metalliques

    Energy Technology Data Exchange (ETDEWEB)

    Kryger, B [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1969-10-01

    In order to study the effect of an external pressure on the limitation of swelling due to fission-gas precipitation, some irradiations have been carried out at burn-ups of about 35.000 MWd/ton, and at average sample temperatures of 575 Celsius degrees, of non-alloyed uranium and uranium 8 per cent molybdenum gained in a thick stainless steel can. A cylindrical central hole allows a fuel swelling from 20 to 33 per cent according to the experiment. After irradiation, the uranium samples showed two types of can rupture: one is due to the fuel swelling, and the other, to the pressure of the fission gases, released through a network of microcracks. The cans of the uranium-molybdenum samples are all undamaged and it is shown that the gas release occurs by interconnection of the bubbles for swelling values higher than those obtained in the case of uranium. For each type of fuel, a swelling-fission gas release relationship is established. The results suggest that good performances with a metallic fuel intended for use in fast reactor conditions can be obtained. (author) [French] Afin d'etudier l'effet d'une pression exterieure sur la limitation du gonflement due a la precipitation des gaz de fission, on a irradie a des taux de combustion d'environ 35.000 MWj/t et a des temperatures moyennes de 575 degres des echantillons d'uranium non allie et d'uranium-molybdene 8 pour cent contenus dans une gaine en acier inoxydable epaisse. Un trou cylindrique central permet au combustible de gonfler librement de 20 a 33 pour cent suivant les cas. Apres irradiation les echantillons d'uranium presentent deux types de ruptures de gaine: l'une due au gonflement du combustible, l'autre a la pression des gaz degages, ce degagement des gaz etant provoque par un reseau de micro-fissures. Les gaines des echantillons d'alliage uranium-molybdene sont toutes intactes et l'on montre que le relachement des gaz opere par interconnexion des bulles pour des valeurs de gonflement plus elevees que dans

  1. Advanced and Integrated Petrophysical Characterization for CO2 Storage: Application to the Ketzin Site Caractérisation pétrophysique intégrée pour le stockage de CO2 : application au site de Ketzin

    Directory of Open Access Journals (Sweden)

    Fleury M.

    2013-06-01

    from 100 to 300 mD. Two zones were identified on the logs characterized by two different irreducible saturation ranging from 15 up to 35%. The measured relative permeability curves show a sharp decrease of the water effective permeability and suggest that a saturation lower than 50% cannot be reached in practice. The exponent of the resistivity index curve is about 1.7, lower than the default value of 2. The caprock has a permeability of 27 nD, a porosity around 15% and a pore diffusivity of 0.8 x 10-9 m2/s La simulation et le suivi d’un stockage de CO2 requiert des données pétrophysiques spécifiques. Nous présentons un ensemble d’expériences applicables à tout stockage et à toute couverture, fournissant des données pour des simulations numériques réalistes du potentiel de stockage et de l’injection. Ces expériences sont intégrées avec les données diagraphiques pour l’estimation de la porosité, la saturation irréductible, la pression capillaire et la perméabilité relative de l’eau en drainage, la saturation en gaz résiduelle, les relations résistivité-saturation et les propriétés de transport de la couverture (perméabilité et diffusivité. Le cas considéré est l’aquifère salin du Trias dans le contexte du projet CO2SINK, le premier site expérimental de stockage en Allemagne situé près de Ketzin. Nous avons utilisé des méthodes de mesure nécessitant des durées raisonnables tout en restant représentatives des processus in situ. Pour le transport diphasique, nous avons utilisé la centrifugation. Pour la résistivité, nous avons utilisé une méthode rapide « Fast Resistivity Index Measurement » (FRIM en drainage et imbibition, en condition ambiante et en condition de stockage. Pour la caractérisation de la couverture, nous avons utilisé une technique rapide RMN (Résonance Magnétique Nucléaire utilisant le deutérium comme traceur pour la mesure de diffusion et une méthode stationnaire innovante pour la mesure de

  2. The Preparation of Au@TiO2 Yolk-Shell Nanostructure and its Applications for Degradation and Detection of Methylene Blue.

    Science.gov (United States)

    Wan, Gengping; Peng, Xiange; Zeng, Min; Yu, Lei; Wang, Kan; Li, Xinyue; Wang, Guizhen

    2017-09-18

    This paper reports the synthesis of a new type of Au@TiO 2 yolk-shell nanostructures by integrating ion sputtering method with atomic layer deposition (ALD) technique and its applications as visible light-driven photocatalyst and surface-enhanced Raman spectroscopy (SERS) substrate. Both the size and amount of gold nanoparticles confined in TiO 2 nanotubes could be facilely controlled via properly adjusting the sputtering time. The unique structure and morphology of the resulting Au@TiO 2 samples were investigated by using various spectroscopic and microscopic techniques in detail. It is found that all tested samples can absorb visible light with a maximum absorption at localized surface plasmon resonance (LSPR) wavelengths (550-590 nm) which are determined by the size of gold nanoparticles. The Au@TiO 2 yolk-shell composites were used as the photocatalyst for the degradation of methylene blue (MB). As compared with pure TiO 2 nanotubes, Au@TiO 2 composites exhibit improved photocatalytic properties towards the degradation of MB. The SERS effect of Au@TiO 2 yolk-shell composites was also performed to investigate the detection sensitivity of MB.

  3. The Preparation of Au@TiO2 Yolk-Shell Nanostructure and its Applications for Degradation and Detection of Methylene Blue

    Science.gov (United States)

    Wan, Gengping; Peng, Xiange; Zeng, Min; Yu, Lei; Wang, Kan; Li, Xinyue; Wang, Guizhen

    2017-09-01

    This paper reports the synthesis of a new type of Au@TiO2 yolk-shell nanostructures by integrating ion sputtering method with atomic layer deposition (ALD) technique and its applications as visible light-driven photocatalyst and surface-enhanced Raman spectroscopy (SERS) substrate. Both the size and amount of gold nanoparticles confined in TiO2 nanotubes could be facilely controlled via properly adjusting the sputtering time. The unique structure and morphology of the resulting Au@TiO2 samples were investigated by using various spectroscopic and microscopic techniques in detail. It is found that all tested samples can absorb visible light with a maximum absorption at localized surface plasmon resonance (LSPR) wavelengths (550-590 nm) which are determined by the size of gold nanoparticles. The Au@TiO2 yolk-shell composites were used as the photocatalyst for the degradation of methylene blue (MB). As compared with pure TiO2 nanotubes, Au@TiO2 composites exhibit improved photocatalytic properties towards the degradation of MB. The SERS effect of Au@TiO2 yolk-shell composites was also performed to investigate the detection sensitivity of MB.

  4. Dosage du mercure dans le gaz naturel par absorption atomique sans flammes Mercury Titration in Natural Gas by Flameless Atomic Absorption

    Directory of Open Access Journals (Sweden)

    La Villa F.

    2006-11-01

    Full Text Available Cet article présente la méthode mise au point par l'Institut Français du Pétrole pour déterminer par absorption atomique sans flamme, les traces de mercure métallique contenu dans un gaz naturel. La méthode d'analyse nécessite une extraction du mercure soit sous forme d'ion mercurique en faisant passer le gaz dans une solution oxydante, soit sous forme d'amalgame avec de l'or ou de l'argent. Le premier mode opératoire s'applique aux échantillons dont la concentration en mercure est supérieure à I ttg/Nm3, le second pour des concentrations inférieures à 5 pg/Nm3. Les seuils de détection sont respectivement 10 ng (en solution et 0,3 ng (en amalgame. La répétabilité pour 100 ng de mercure (en amalgame est de ± 7% pour une probabilité de.95 %. En conclusion, dans un échantillon de gaz naturel, compte tenu du volume des prélèvements effectués, il est possible de détecter des concentrations de l'ordre du nanogramme de mercure par mètre cube de gaz. This article describes the method developed by IFP using flameless atomic absorption to determine metallic mercury traces in a natural gas. The analyst method requires a mercury extraction either in the form of mercuric ions by making the gas pass through an oxidizing solution or in the form of an amalgam with gold or silver. The former operating method applies ta samples having a mercury concentration greater than I !ag/Nm3, and the latter for concentrations smaller than 5 (-Lg/Nm3. Detection thresholds are respectively 10 ng (in solution and 0.3 ng (in amalgam. The repeatability for 100 ng of mercury (in amalgam is ± 7 % with a probability of 95%. To conclude, in a sample of natural gas, considering the volume of the samples taken, it is possible ta detect concentrations in the vicinity of one nanogrom of mercury per cubic meter of gas.

  5. Fractionation of Hydrocarbons Between Oil and Gas Phases Fractionnement des hydrocarbures entre les phases huile et gaz

    Directory of Open Access Journals (Sweden)

    Ruffier-Meray V.

    2006-12-01

    expliquer certains phénomènes de migration. Lors de l'injection de gaz, la dissolution préférentielle de certains constituants dans le gaz peut modifier la composition et le comportement le l'huile en place. Le stockage souterrain de gaz dans des réservoirs contenant encore de l'huile peut également être concerné par ce problème. Des études ont été menées à l'IFP, dans le cadre de différents projets, de façon à mettre en évidence ce phénomène et à le quantifier. Deux d'entre elles, qui concernent la géochimie de réservoir, ont été menées sur des fluides réels. La troisième étude, qui est un test de gonflement, concerne l'injection de gaz, le fluide considéré est un mélange synthétique comprenant des hydrocarbures jusqu'à C30. Les équipements utilisés sont, d'une part, une cellule saphir ayant une pression maximale d'utilisation de 400 bar, et d'autre part un équipement appelé Hercule dont la pression maximale d'utilisation est de 1500 bar. Pour chacun des fluides étudiés, la pression de saturation a été mesurée. Pour plusieurs paliers, inférieurs à la pression de saturation, les phases liquides et gazeuses à l'équilibre ont été prélevées à pression constante et analysées. Dans le cas de l'injection de gaz, les compositions à l'équilibre ont été déterminées pour des mélanges contenant des quantités variables de gaz. Par rapport aux n-alcanes de même nombre d'atomes de carbone, les hydrocarbures aromatiques restent préférentiellement dans la phase liquide, de même que les cycloalcanes pour lesquels ce phénomène est moins net toutefois. Par contre, la phase gazeuse s'enrichit légèrement en isoalcanes. Ces phénomènes de fractionnement sont moins marqués au voisinage de la région critique. Ils ont été modélisés au moyen d'une équation d'état cubique assortie d'une règle de mélange par contribution de groupes.

  6. Report made on behalf of the mixed parity commission in charge of the text proposal about the remaining dispositions to be discussed of the project of law relative to the electric and gas public utilities and to the electric and gas companies; Rapport fait au nom de la Commission mixte paritaire chargee de proposer un texte sur les dispositions restant en discussion du projet de loi relatif au service public de l'electricite et du gaz et aux entreprises electriques et gaziere

    Energy Technology Data Exchange (ETDEWEB)

    Lenoir, J.C.; Poniatowski, L

    2004-07-01

    This project of law aims to adapt the electricity and gas sector to the new economical context of opening of the energy markets to competition. It gives to energy companies the internal organization base necessary to warrant a high level of service and a transparent and non-discriminatory access of third parties to transport and distribution networks. These evolutions will allow Electricite de France (EdF) and Gaz de France (GdF) companies to compete on equal terms with their European competitors. It confirms first the prime role of public utility of both companies and then transposes the dispositions of the European directives relative to the organization of EdF and GdF integrated companies. It foresees the creation of two daughter companies for the management of energy transport activities. The project of law foresees also the change of the status of EdF and GdF companies and the reform of the retirement pensions of the personnel. This report presents, first, in a comparative table the articles adopted by the French house of commons and the changes adopted by the Senate. Then, a common text is proposed by the mixed parity commission for the articles that remained under discussion. (J.S.)

  7. 10 Contribution à la régulation de la température au sein d'un ...

    African Journals Online (AJOL)

    ALI

    Cette dégradation est influencée par plusieurs facteurs tels que : le pH, la température, la teneur en eau, etc. [2]. La température au ... Le digesteur étudié est de type batch, rempli à moitié dont l'autre moitié sert pour contenir le gaz produit. Le substrat utilisé .... coefficient d'absorption de la plaque; G éclairement solaire;.

  8. Centrales au gaz et Energies renouvelables: comparer des pommes avec des pommes

    Energy Technology Data Exchange (ETDEWEB)

    Bolinger, Mark; Wiser, Ryan; Golove, William

    2003-10-20

    The fundamental conclusion that we draw from this analysis is that one should not to base itself blindly on forecasts prices of natural gas when one compare contracts at price fixes with producers of renewable energy with contracts at variable prices with promoters power stations with gas. Indeed, forecasts of the prices of gas do not succeed not to enter the associated costs with the covering of the risk, that they are connected to the negative pressure against the cover, with the CAPM, with costs of transaction or with unspecified combination of three. Thus, insofar as price stability to length term is developed, better way of comparing the two choices would be to have recourse to the data on the prices in the long term natural gas, and not with forecasts of the prices. During three last years at least, the use of these prices in the long term would have besides license to correct a methodological error who, obviously, seem to have supported unduly, and of relatively important way, power stations with natural gas compared to their competitors of renewable energies.

  9. Reconsideration of Methane Isotope Signature As a Criterion for the Genesis of Natural Gas: Influence of Migration on Isotopic Signatures Reconsidération de la signature isotopique du méthane comme critère pour la genèse du gaz naturel : influence de la migration sur les signatures isotopiques

    Directory of Open Access Journals (Sweden)

    Pernaton E.

    2006-11-01

    Full Text Available Experiments were performed in the purpose of studying the isotopic consequences of the diffusional transport of hydrocarbon gases through sediment rocks. Linked to a numerical model, these gas diffusion experiments through a shale porous plug allowed us to correlate porosity and diffusivity of the migration medium. Significant isotopic fractionations (carbon and hydrogen of methane, and ethane at a lesser degree were observed. This is in contradiction with the actual dogma of isotope geochemistry of natural gases which claims that no fractionation occurs during gas migration. The genetic characterization of natural gases by using the isotopic signature of methane appears as an ambiguous method. Plusieurs expériences ont été réalisées dans le but d'étudier les conséquences isotopiques du transport par diffusion des gaz hydrocarbures au travers des roches sédimentaires. Associées à un modèle numérique, ces expériences de diffusion au travers d'une membrane d'argile reconstituée nous ont permis de corréler deux paramètres pétrophysiques du milieu de migration : la porosité et la diffusivité. D'importants fractionnements isotopiques ont été observés au cours de la diffusion du méthane et, à plus petite échelle, lors de la diffusion de l'éthane. Ces résultats remettent en cause le dogme actuel de la géochimie isotopique des gaz naturels qui stipule que la migration des gaz ne peut induire de fractionnements isotopiques. En conséquence, les méthodes de caractérisation génétique des gaz naturels utilisant la signature isotopique du méthane apparaissent comme insuffisantes.

  10. Corrosion by cooling gases in nuclear reactors; la corrosion par les gaz caloporteurs dans les reacteurs nucleaires

    Energy Technology Data Exchange (ETDEWEB)

    Darras, R. [Commissariat a l' energie atomique et aux energies alternatives - CEA, Centre de Saclay, Section d' etude de la corrosion par gaz et metaux liquides (France)

    1960-07-01

    This article begins with a review of the various materials which can be used and the cooling gases in which they may be heated, emphasis being placed on the importance of reaching temperatures as high as possible. This is followed by a few general remarks on the dry oxidation of metals and alloys, particularly with regard to diffusion phenomena and their various possible mechanisms, and also the methods of investigation employed. Finally, the behaviour of the chief nuclear materials heated in the various gases is studied successively. Materials used for fuel (metallic uranium, uranium oxide, carbides and silicides), canning materials (magnesium, aluminium, zirconium, beryllium, stainless and refractory steels), structural materials (ordinary or slightly alloyed steels), and finally moderators (graphite, beryllium oxide) are deal with in this way. This account is backed up both by the results obtained at the CEA and by work published outside or abroad up to the present day. In conclusion, every effort has been made to direct future research on the basis of the foregoing. Reprint of a paper published in Industries Atomiques - no. 9/10, 1959, p. 3-23 [French] Dans cet article, on passe tout d'abord en revue les divers materiaux utilisables et les gaz de refroidissement dans lesquels ils peuvent etre chauffes, en insistant sur l'interet d'atteindre des temperatures aussi elevees que possible. On rappelle ensuite quelques generalites sur l'oxydation seche des metaux et alliages, notamment en ce qui concerne les phenomenes de diffusion et leurs divers mecanismes possibles ainsi que les methodes d'etude. Enfin, le comportement des principaux materiaux nucleaires chauffes dans les divers gaz est etudie successivement. On traita ainsi des materiaux combustibles (uranium metallique, oxyde, carbures et siliciures d'uranium), des materiaux de gainage (magnesium, aluminium, zirconium, beryllium, aciers inoxydables et refractaires), des materiaux de structure (aciers ordinaires

  11. Fe2O3-Au hybrid nanoparticles for sensing applications via sers analysis

    International Nuclear Information System (INIS)

    Murph, Simona Hunyadi; Searles, Emily

    2017-01-01

    Nanoparticles with large amounts of surface area and unique characteristics that are distinct from their bulk material provide an interesting application in the enhancement of inelastic scattering signal. Surface Enhanced Raman Spectroscopy (SERS) strives to increase the Raman scattering effect when chemical species of interest are in the close proximity of metallic nnaostructures. Gold nanoparticles of various shapes have been used for sensing applications via SERS as they demonstrate the greatest effect of plasmonic behavior in the visible-near IR region of the spectrum. When coupled with other nanoparticles, namely iron oxide nanoparticles, hybrid structures with increased functionality were produced. Multifunctional iron oxide-gold hybrid nanostructures have been created via solution chemistries and investigated for analyte detection of a model analyte. By exploiting their magnetic properties, nanogaps or “hot spots” were rationally created and evaluated for SERS enhancement studies.

  12. Colorimetric Analysis on Flocculation of Bioinspired Au Self-Assembly for Biophotonic Application

    Directory of Open Access Journals (Sweden)

    Wan-Joong Kim

    2009-01-01

    Full Text Available Gold nanoparticles exhibited strong surface plasmon absorption and couplings between neighboring particles within bioactivated self-assembly modified their optical properties. Colorimetric analysis on the optical modification of surface plasmon resoanance (SPR shift and flocculation parameter functionalized bioinspired gold assembly for biophotonic application. The physical origin of bioinspired gold aggregation-induced shifting, decreasing, or broadening of the plasmon absorption spectra could be explained in terms of dynamic depolarization, collisional damping, and shadowing effects.

  13. Development of mercury porosimeter. Application to nuclear graphite studies (1961); Mise au point d'un porosimetre a mercure. Application a l'etude des graphites nucleaires (1961)

    Energy Technology Data Exchange (ETDEWEB)

    Bocquet, M; Genisson, J; Sailleau, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1961-07-01

    A mercury porosimeter, model IFP-CEA, has been developed for application to nuclear graphite studies. The apparatus is based on the capillary depression phenomenon. The relationship between the radius of a pore and the pressure at which mercury fills it is pr = -2 {sigma} cos {theta} ( {sigma} is the surface tension, {theta} the angle of contact of the mercury). After some theoretical consideration, the apparatus is described. The mercury pressure is increased step-wise from 0 to 1000 kg/cm{sup 2} thus yielding the complete distribution of pores from 92 {mu} to 75 A. Results are, then presented concerning nuclear graphites which show the evolution of the porous structure under the effect of bitumen impregnation. In general, the volume of the large pores decreases while that of the small pores increases. The structure of impregnated products appears to depend to a certain extent on that of the starting materials. It has also been possible to study other products with this porosimeter; the range of measurements possible is such that it may be used for the study of the majority of porous materials. (authors) [French] Un porosimetre a mercure modele IFP-CEA a ete mis au point en vue de son application a l'etude de graphites nucleaires. Le fonctionnement de l'appareil repose sur le phenomene de depression capillaire. On etablit la relation existant entre le rayon r d'un pore et la pression p pour laquelle le mercure peut y penetrer: pr = -2 {sigma} cos {theta} ( {sigma} tension superficielle, {theta} angle de contact du mercure). Apres quelques considerations theoriques, l'appareil utilise est decrit. Il permet de faire varier par palier la pression du mercure entre 0 et 1000 kg/cm{sup 2} et d'etablir ainsi la distribution complete des rayons de pores compris entre 92 {mu} et 75 A. Les resultats d'une etude faite sur des graphites nucleaires sont alors presentes faisant apparaitre l'evolution de la structure poreuse sous l'effet des impregnations au brai. D'une facon

  14. Study of new structures adapted to gas-graphite and gas-heavy water reactors; Etude de structures nouvelles adaptees aux reacteurs graphite-gaz et eau lourde-gaz

    Energy Technology Data Exchange (ETDEWEB)

    Martin, R; Roche, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    'EDF d'une part, les conclusions des etudes et essais effectues hors pile d'autre part, conduisent a un changement considerable de la physionomie des reacteurs de la filiere Graphite-Gaz, Les principales modifications envisagees sont analysees dans la communication. L'adoption d'un element combustible annulaire et d'un soufflage descendant permettront d'accroitre considerablement la puissance specifique et la puissance developpee par canal; il en resultera une reduction sensible du nombre des canaux et un accroissement correlatif de la maille du reseau - L'empilement de graphite devra etre adapte a ces nouvelles conditions - Des raisons de securite conduisent a generaliser l'emploi du beton precontraint pour la construction du caisson; elles pourront amener a integrer a l'interieur de celui-ci les echangeurs et l'appareil de manutention du combustible (dispositif dit: 'en grenier'). Une maquette en vraie grandeur de ce grenier a ete construite a Saclay avec la participation d'EURATOM; les resultats d'exploitation en sont presentes, ainsi que des idees de barres de controle de conception nouvelle. En ce qui concerne la filiere Eau-Lourde-Gaz, les etudes sont poursuivies dans deux voies principales; la premiere, qui conserverait l'usage de tubes de force horizontaux, tient compte de l'experience acquise au cours de la construction du reacteur EL4 dont elle constituerait une extrapolation; la seconde, inspiree des etudes poursuivies au titre de la filiere Graphite-Gaz, ferait appel a un caisson en beton precontraint pour tenir la pression, le moderateur etant sensiblement a la pression du fluide refrigerant et le combustible etant dispose dans des canaux verticaux. Les merites respectifs de ces deux variantes sont analyses dans la communication. (auteurs)

  15. Size selectivity of magnetite core- (Ag/Au) shell nanoparticles for multimodal imaging applications

    Science.gov (United States)

    Singh, Pinki; Upadhyay, Chandan

    2017-10-01

    The magnetic and optical properties of nanomaterials play a significant role in the selection of the materials to be used for contrast enhancement in different biological and cell imaging techniques. These nanoparticles can also be used as drug delivery agents. The calculation of absorption efficiency and surface plasmon resonance wavelength has been performed using Mie theory and MATLAB programs. The study of spectrum calculated indicates the dependence of several optical properties such as resonance and absorption efficiency peak on ratio of core radius to the thickness of shell. A systematic study on the effect of nanoparticle dimension has been presented which clearly indicates that the optical properties can be modulated across the visible and near infrared range by changing these parameters. These properties of nanomaterials make them suitable for their application as multimodal imaging agents as they are also magnetically active and biocompatible.

  16. Au102(p-MBA)44 nanocluster, a superatom suitable for bio-applications

    Science.gov (United States)

    Häkkinen, Hannu

    2016-12-01

    Inorganic nanoparticles, including metals, semiconductors and metal oxides, comprise a common set of structures exhibiting an inorganic core `passivated' by an organic shell. Ligated inorganic nanoparticles currently provoke widespread fundamental interest in their structural, optical and magnetic properties, which differ fundamentally from bulk counterparts. These nanomaterials are already finding applications in biology, medicine, solar energy, and display panels. 1-6 Conjugating inorganic nanoparticles with organic (biological) material for applications in nanobiology and nanomedicine creates significant challenges for controlling the effects on the environment, particularly regarding toxicity. Chemical reactions of almost identical substances can lead to drastically different outcomes in a biological environment. As a simplistic example one can consider the case of ethanol vs. methanol. Ethanol (CH3CH2OH) can be consumed by humans while even a small dose of methanol (CH3OH) can be fatal, yet the difference between the molecular formulas of these substances is just the smallest meaningful hydrocarbon unit CH2. This illuminates the fact that minute differences in the size and structure of molecular compounds can have drastically different end effects in a biological environment due to the way the compounds start to react with the environment. In recent years, gold nanoparticles covered by ligands that make them water-soluble have become a popular target for research in nanobiology and nanomedicine. 1,2 In most cases up to now, colloidal nanoparticles (5 nm and larger) have been used for sensing and photothermal applications. However, this class of gold-based nanomaterials still has large uncertainties regarding the atomic composition of the nanoparticle surface and particularly the metal-ligand interface. A simple example illuminates the facts. The density of atoms in the fcc lattice of macrosocopic gold metal is about 59 atoms/nm3. This means that a spherical

  17. Au-Nano-particle Deposition on alumina surfaces for environmental application-a density functional study

    International Nuclear Information System (INIS)

    Chatterjee, Abhijit

    2009-01-01

    Full text: It has been found that nanometer size gold particles on different oxide supports can act as catalysts, suggestions include quantum size effects, availability of low coordinated sites, and strain or combined effects of the gold particles and the oxide support. From photo dissociation spectroscopy and theory it has been inferred that the 2D / 3D structural transition occurs between five and seven atoms depending on charge state neutrals and singly positively charged ions. Here we will look into the interaction of gold particles over different sites of the aluminum -oxide surface to tune the catalytic activity of the novel material using first principle periodic calculations and compare them with the reactivity index to formulate a priori rule for metal cluster interaction. The catalytic application is aimed to CO adsorption type reactions for a greener environment. (author)

  18. A rapid green strategy for the synthesis of Au "meatball"-like nanoparticles using green tea for SERS applications

    Science.gov (United States)

    Wu, Shichao; Zhou, Xi; Yang, Xiangrui; Hou, Zhenqing; Shi, Yanfeng; Zhong, Lubin; Jiang, Qian; Zhang, Qiqing

    2014-09-01

    We report a simple and rapid biological approach to synthesize water-soluble and highly roughened "meatball"-like Au nanoparticles using green tea extract under microwave irradiation. The synthesized Au meatball-like nanoparticles possess excellent monodispersity and uniform size (250 nm in diameter). Raman measurements show that these tea-generated meatball-like gold nanostructures with high active surface areas exhibit a high enhancement of surface-enhanced Raman scattering. In addition, the Au meatball-like nanoparticles demonstrate good biocompatibility and remarkable in vitro stability at the biological temperature. Meanwhile, the factors that influence the Au meatball-like nanoparticles morphology are investigated, and the mechanisms behind the nonspherical shape evolution are discussed.

  19. Study of a device for the direct measurement of the fission gas pressure inside an in-pile fuel element; Etude d'un dispositif pour la mesure directe de la pression des gaz de fission a l'interieur d'un element combustible en pile

    Energy Technology Data Exchange (ETDEWEB)

    Lavaud, B; Uschanoff, S [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    The fission gas pressure inside a fuel element made of a refractory fuel constitutes an important limiting factor for the burn-up. Although it is possible to calculate approximately the volume of gas produced outside the fuel during its life-time; it is nevertheless very difficult to evaluate the pressure since the volume allowed to the fission gases, as well as their temperature are known only very approximately. This physical value, which is essential for the technologist, can only be known by direct in-pile measurement of the pressure. The report describes the equipment which has been developed for this test. (authors) [French] La pression des gaz de fission a l'interieur d'un element combustible a combustible refractaire constitue une des limitations importantes du taux de combustion. Si on peut approcher par calcul la determination du volume, des gaz degages hors du combustible au cours de sa vie, il est par contre tres difficile d'evaluer la pression car le volume alloue aux gaz de fission et leur temperature sont tres mal connus. Cette donnee essentielle pour le technologue ne peut etre atteinte que par une mesure directe en pile de la pression. Le rapport decrit l'appareillage qui a ete mis au point pour cet essai. (auteurs)

  20. Cycle e-business: the e-business of Gaz De France; Cycle e-business: l'e-business de Gaz de France

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    This paper deals with the Gaz De France Group position in the e-business context. In terms of e-business, all is done to put Internet at the marketing service. Three examples of Internet sites realization and the future policy are presented. (A.L.B.)

  1. An enhanced photocatalytic response of nanometric TiO2 wrapping of Au nanoparticles for eco-friendly water applications.

    Science.gov (United States)

    Scuderi, Viviana; Impellizzeri, Giuliana; Romano, Lucia; Scuderi, Mario; Brundo, Maria V; Bergum, Kristin; Zimbone, Massimo; Sanz, Ruy; Buccheri, Maria A; Simone, Francesca; Nicotra, Giuseppe; Svensson, Bengt G; Grimaldi, Maria G; Privitera, Vittorio

    2014-10-07

    We propose a ground-breaking approach by an upside-down vision of the Au/TiO2 nano-system in order to obtain an enhanced photocatalytic response. The system was synthesized by wrapping Au nanoparticles (∼8 nm mean diameter) with a thin layer of TiO2 (∼4 nm thick). The novel idea of embedding Au nanoparticles with titanium dioxide takes advantage of the presence of metal nanoparticles, in terms of electron trapping, without losing any of the TiO2 exposed surface, so as to favor the photocatalytic performance of titanium dioxide. A complete structural characterization was made by scanning electron microscopy, transmission electron microscopy and X-ray diffraction. The remarkable photocatalytic performance together with the stability of the nano-system was demonstrated by degradation of the methylene blue dye in water. The non-toxicity of the nano-system was established by testing the effect of the material on the reproductive cycle of Mytilus galloprovincialis in an aquatic environment. The originally synthesized material was also compared to conventional TiO2 with Au nanoparticles on top. The latter system showed a dispersion of Au nanoparticles in the liquid environment, due to their instability in the aqueous solution that clearly represents an environmental contamination issue. Thus, the results show that nanometric TiO2 wrapping of Au nanoparticles has great potential in eco-friendly water/wastewater purification.

  2. Surface Modification of Carbon Nanotube Networked Films with Au Nanoclusters for Enhanced NO2 Gas Sensing Applications

    Directory of Open Access Journals (Sweden)

    M. Penza

    2008-01-01

    Full Text Available Multiwalled carbon nanotube (MWCNT films have been deposited by using plasma-enhanced chemical vapor deposition (PECVD system onto alumina substrates, provided with 6 nm thick cobalt (Co growth catalyst for remarkably improved NO2 gas sensing, at working temperature in the range of 100–250∘C. Functionalization of the MWCNTs with nanoclusters of gold (Au sputtering has been performed to modify the surface of carbon nanotube networked films for enhanced and specific NO2 gas detection up to sub-ppm level. It is demonstrated that the NO2 gas sensitivity of the MWCNT-based sensors depends on Au-loading used as surface-catalyst. The gas response of MWCNT-based chemiresistor is attributed to p-type conductivity in the Au-modified semiconducting MWCNTs with a very good short-term repeatability and faster recovery. The sensor temperature of maximum NO2 sensitivity of the Au-functionalized MWCNTs is found to decrease with increasing Au-loading on their surface, and continuous gas monitoring at ppb level of NO2 is effectively performed with Au-modified MWCNT chemiresistors.

  3. Une chaîne de traitement de l'information géographique au service de l'application de la loi Littoral

    Directory of Open Access Journals (Sweden)

    Patrick GUILLOPÉ

    1994-09-01

    Full Text Available L’application de la loi Littoral nécessitait une approche nouvelle de la part de l’État et la mise en œuvre d’outils nouveaux pour une gestion à long terme. L’apport de traitements automatiques de l’information géographique a été ainsi testé au CETE Normandie-Centre sur trois des grands principes posés par cette loi.

  4. Induced accumulation of Au, Ag and Cu in Brassica napus grown in a mine tailings with the inoculation of Aspergillus niger and the application of two chemical compounds.

    Science.gov (United States)

    González-Valdez, Eduardo; Alarcón, Alejandro; Ferrera-Cerrato, Ronald; Vega-Carrillo, Héctor René; Maldonado-Vega, María; Salas-Luévano, Miguel Ángel; Argumedo-Delira, Rosalba

    2018-06-15

    This study evaluated the ability of Brassica napus for extracting gold (Au), silver (Ag) and copper (Cu) from a mine tailings, with the inoculation of two Aspergillus niger strains, and the application of ammonium thiocyanate (NH 4 SCN) or ammonium thiosulfate [(NH 4 ) 2 S 2 O 3 ]. After seven weeks of growth inoculated or non-inoculated plants were applied with 1 or 2 g kg -1 of either NH 4 SCN or (NH 4 ) 2 S 2 O 3 , respectively. Eight days after the application of the chemical compounds, plants were harvested for determining the total dry biomass, and the content of Au, Ag, and Cu in plant organs. Application of (NH 4 ) 2 S 2 O 3 or NH 4 SCN resulted in enhanced Au-accumulation in stems (447% and 507%, respectively), while either (NH 4 ) 2 S 2 O 3 +Aspergillus, or NH 4 SCN increased the Au-accumulation in roots (198.5% and 404%, respectively) when compared to the control. Treatments with (NH 4 ) 2 S 2 O 3 or (NH 4 ) 2 S 2 O 3 +Aspergillus significantly increased (P ≤ 0.001) the accumulation of Ag in leaves (677% and 1376%, respectively), while NH 4 SCN + Aspergillus, and (NH 4 ) 2 S 2 O 3 enhanced the accumulation in stems (7153% and 6717.5%). The Ag-accumulation in roots was stimulated by NH 4 SCN+ Aspergillus, and (NH 4 ) 2 S 2 O 3 + Aspergillus (132.5% and 178%, respectively), when compared to the control. The combination of NH 4 SCN+Aspergillus significantly enhanced the Cu-accumulation in leaves (228%); whereas NH 4 SCN+ Aspergillus, or (NH 4 ) 2 S 2 O 3 + Aspergillus resulted in greater accumulation of Cu in stems (1233.5% and 1580%, respectively) than the control. Results suggest that either NH 4 SCN or (NH 4 ) 2 S 2 O 3 (with or without Aspergillus) improved the accumulation of Au and Ag by B. napus. Accumulation of Au and Ag in plant organs overpassed the hyperaccumulation criterion (> 1 mg kg -1 of plant biomass); whereas Cu-accumulation in stems and roots also overpassed such criterion (> 1000 mg kg -1 ) by applying

  5. Preparation of dendritic Ag/Au bimetallic nanostructures and their application in surface-enhanced Raman scattering

    International Nuclear Information System (INIS)

    Yi Zao; Chen Shanjun; Chen Yan; Luo Jiangshan; Wu Weidong; Yi Yougen; Tang Yongjian

    2012-01-01

    Dendritic Ag/Au bimetallic nanostructures have been synthesized via a multi-stage galvanic replacement reaction of Ag dendrites in a chlorauric acid (HAuCl 4 ) solution at room temperature. After five stages of replacement reaction, one obtains structures with protruding nanocubes; these will mature into many porous structures with a few Ag atoms that are left over dendrites. The morphological and compositional changes which evolved with reaction stages were analyzed by using scanning electron microscopy, transmission electron microscopy, UV–visible spectroscopy, selected area electron diffraction and energy-dispersive X-ray spectrometry. The replacement of Ag with Au was confirmed. A formation mechanism involving the original development of Ag dendrites into porous structures with the growth of Au nanocubes on this underlying structure as the number of reaction stages is proposed. This was confirmed by surface-enhanced Raman scattering (SERS). The dendritic Ag/Au bimetallic nanostructures could be used as efficient SERS active substrates. It was found that the SERS enhancement ability was dependent on the stage of galvanic replacement reaction. - Highlights: ► Dendritic Ag/Au bimetallic nanostructures have been synthesized. ► Protruding cubic nanostructures obtained after 5 stages mature into porous structures. ► SERS results allow confirm the proposed formation mechanism. ► The nanostructures could be used as efficient SERS active substrates.

  6. Highly reproducible surface-enhanced Raman scattering-active Au nanostructures prepared by simple electrodeposition: origin of surface-enhanced Raman scattering activity and applications as electrochemical substrates.

    Science.gov (United States)

    Choi, Suhee; Ahn, Miri; Kim, Jongwon

    2013-05-24

    The fabrication of effective surface-enhanced Raman scattering (SERS) substrates has been the subject of intensive research because of their useful applications. In this paper, dendritic gold (Au) rod (DAR) structures prepared by simple one-step electrodeposition in a short time were examined as an effective SERS-active substrate. The SERS activity of the DAR surfaces was compared to that of other nanostructured Au surfaces with different morphologies, and its dependence on the structural variation of DAR structures was examined. These comparisonal investigations revealed that highly faceted sharp edge sites present on the DAR surfaces play a critical role in inducing a high SERS activity. The SERS enhancement factor was estimated to be greater than 10(5), and the detection limit of rhodamine 6G at DAR surfaces was 10(-8)M. The DAR surfaces exhibit excellent spot-to-spot and substrate-to-substrate SERS enhancement reproducibility, and their long-term stability is very good. It was also demonstrated that the DAR surfaces can be effectively utilized in electrochemical SERS systems, wherein a reversible SERS behavior was obtained during the cycling to cathodic potential regions. Considering the straightforward preparation of DAR substrates and the clean nature of SERS-active Au surfaces prepared in the absence of additives, we expect that DAR surfaces can be used as cost-effective SERS substrates in analytical and electrochemical applications. Copyright © 2013 Elsevier B.V. All rights reserved.

  7. Eco-friendly synthesis of TiO2, Au and Pt doped TiO2 nanoparticles for dye sensitized solar cell applications and evaluation of toxicity

    Science.gov (United States)

    Gopinath, K.; Kumaraguru, S.; Bhakyaraj, K.; Thirumal, S.; Arumugam, A.

    2016-04-01

    Driven by the demand of pure TiO2, Au and Pt doped TiO2 NPs were successfully synthesized using Terminalia arjuna bark extract. The eco-friendly synthesized NPs were characterized by UV-Vis-DRS, ATR-FT-IR, PL, XRD, Raman, SEM with EDX and TEM analysis. The synthesized NPs were investigation for dye sensitized solar cell applications. UV-Vis-Diffused Reflectance Spectra clearly showed that the expected TiO2 inter band absorption below 306 nm, incorporation of gold shows surface plasma resonant (SPR) near 555 nm and platinum incorporated TiO2 NPs shows absorbance at 460 nm. The energy conversion efficiency for Au doped TiO2 NPs when compared to pure and Pt doped TiO2 NPs. In addition to that, Au noble metal present TiO2 matrix and an improve open-circuit voltage (Voc) of DSSC. Synthesized NPs was evaluated into antibacterial and antifungal activities by disk diffusion method. It is observed that NPs have not shown any activities in all tested bacterial and fungal strains. In this eco-friendly synthesis method to provide non toxic and environmental friendly nanomaterials can be used for solar energy device application.

  8. Oil and Gas Prospects in Egypt Recherches d'huile et de gaz en Égypte

    Directory of Open Access Journals (Sweden)

    El Ayouti M. K.

    2006-10-01

    and gas pools mainly vvithin the Upper and Lower Cretaceous. Recent advances in seismic techniques are helping in locating deeper structures, which might prove instrumental in the upgrading of the oil possibilites of the region. At present, the exploration activities are going on in the different oil and gas provinces in Egypt. These activilles are expected to increase and are also expected to expand to new areas in the eastern part of the Gulf of Suez Basin, offshore and onland, in Northern Sinai and in the Offshore Mediterranean. These new areas are believed to house very good prospects which will be tested not before long. It is also hoped that progress in seismic tools and techniques will add to the possibilities of finding more oil and gas. On connaît des accumulations d'huiles depuis 1868, quelque 10 ans après le célèbre puits de Drake en Pennsylvanie (août 1859. Ces accumulations ont été trouvées comme des suintements dans des tunnels forés pour l'extraction du soufre dans la région de Gemsa sur la côte ouest du golfe de Suez. Depuis cette époque, les activités d'exploration se sont poursuivies à travers une longue histoire d'opérations qui témoignaient des derniers développement dans les outils et les techniques. Jusqu'à maintenant, la principale province à huile d'Egypte est le bassin du golfe de Suez où la majorité des réserves ont été trouvées. D'autres provinces à hydrocarbures sont le bassin du delta du Nil, celui d'Abu Garadig et la ride d'El Alamein, les deux derniers situés dans le désert occidental. Il y a eu trois importantes découvertes de gaz dans le delta du Nil, dont deux en mer, en plus de quelques indices de gaz encore non commerciaux. Outre les découvertes mentionnées, les activités d'exploration au cours de cette longue période ont apporté une masse d'informations géologiques et géophysiques qui ont contribué largement à la connaissance géologique de l'Egypte, et en particulier à la géologie p

  9. Recent Advances in Laser-Ablative Synthesis of Bare Au and Si Nanoparticles and Assessment of Their Prospects for Tissue Engineering Applications

    Directory of Open Access Journals (Sweden)

    Ahmed Al-Kattan

    2018-05-01

    Full Text Available Driven by surface cleanness and unique physical, optical and chemical properties, bare (ligand-free laser-synthesized nanoparticles (NPs are now in the focus of interest as promising materials for the development of advanced biomedical platforms related to biosensing, bioimaging and therapeutic drug delivery. We recently achieved significant progress in the synthesis of bare gold (Au and silicon (Si NPs and their testing in biomedical tasks, including cancer imaging and therapy, biofuel cells, etc. We also showed that these nanomaterials can be excellent candidates for tissue engineering applications. This review is aimed at the description of our recent progress in laser synthesis of bare Si and Au NPs and their testing as functional modules (additives in innovative scaffold platforms intended for tissue engineering tasks.

  10. Recent and future developments at the Regie du gaz naturel

    International Nuclear Information System (INIS)

    Giroux, J.

    1995-01-01

    The history of the Quebec Regie du gaz naturel, dating back to 1932, and its role in distributing natural gas in Quebec was described. Among more recent developments construction of a natural gas distribution system on the south shore of Quebec City was discussed. Unlinked mini-systems were built in St-Romuald and Levis. Gas was delivered by truck until an underwater crossing was completed. The federal-provincial infrastructures program was also summarized. The most important ruling by the Regie was the D-94-19 decision on GMi's supply policy and the concept of u mbrella buy-sell . Although this policy was originally approved by the Regie, after consideration of all factors, it was decided that this system was not in line with the deregulation trend and that buyers and sellers could do without GMi's intrusion in their contractual agreements. Issues to be addressed by the Regie in the coming months included transportation service, unbundling, cost allocation and rate of return adjustments mechanism in regards to the recent National Energy Board (NEB) decision on the subject, and separation of (LDC) distribution activities from LDC sales

  11. Les techniques de séparation de gaz par membranes Gas Separation Techniques by Membranes

    Directory of Open Access Journals (Sweden)

    Avrillon R.

    2006-11-01

    Full Text Available Deux types de membranes peuvent être utilisés pour la séparation des gaz. Les unes sont poreuses et séparent les gaz sur la base de leur masse moléculaire selon un mécanisme de diffusion de Knudsen dans des micropores. Les facteurs de séparation obtenus sont généralement trop faibles pour présenter un intérêt industriel. Les autres, appelées membranes non poreuses, mettent en oeuvre un mécanisme de dissolution-diffusion des gaz dans une fine couche de polymère dénuée de toute porosité. C'est de ces dernières que nous allons parler. Commencé il y a une vingtaine d'années, le développement de ce type de membranes a conduit aux premières applications industrielles en 1979 avec l'introduction par Monsanto des séparateurs PRISM pour la récupération d'hydrogène à partir de différents gaz de raffinerie et de pétrochimie. Après des débuts modestes par suite de la compétition avec des technologies éprouvées comme la cryogénie, l'adsorption et l'absorption, la perméation gazeuse est en train de conquérir sa place parmi les techniques de séparation de gaz. Elle est aujourd'hui l'une des techniques membranaires présentant le plus fort taux de progression (30 % par an. Après un rappel des principes de base de la perméation gazeuse on abordera successivement les points suivants : - le choix du polymère constituant la couche séparatrice, - l'élaboration des membranes à structure asymétrique présentant une peau dense et fine, - les principales applications industrielles. Cela permettra de mettre en évidence les avantages et les limitations actuelles de la perméation gazeuse et de souligner les différents domaines où les efforts de R et D peuvent amener des progrès significatifs. Principle of Gas permeation - Gas permeation is a technique for fractionating gas mixtures by using nonporous polymer membranes having a selective permeability to gas according to a dissolution-diffusion mechanism. Gas is made to pass

  12. Natural gas and laundry: an efficient duo; Conference Cegibat: Gaz naturel et blanchisserie

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    Cegibat, the information-recommendation agency of Gaz de France for building engineering professionals, has organized this conference about the use of natural gas in the laundry sector. This document summarizes the content of the different talks dealing with: the history and evolution of laundry activity, the energy consumption problem, the gas appliances (dryers) and their advantages, some testimonies in the health sector (hospitals), the regulatory aspects, the economic aspects (tariffs), Gaz de France energy diagnostic offer, and the testimony of a launderette. (J.S.)

  13. Can-rupture detection in gas-cooled nuclear reactors; La detection des ruptures de gaine dans les piles nucleaires refroidies par gaz

    Energy Technology Data Exchange (ETDEWEB)

    Roguin, A. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-07-01

    Can-rupture detection (DRG) is one important aspect of pile safety, more particularly so in the case of gas-cooled reactors. A rapid and sure detection constitutes also an improvement as far as the efficiency of electricity-producing nuclear power stations are concerned. Among the numerous can-rupture detection methods, that based on the measurement of the concentration of short-lived fission gases in the heat-carrying fluid has proved to be the most sensitive and the most rapid. A systematic study of detectors based on the electrostatic collection of the daughter products of fission gases has been undertaken with a view to equip the reactors EL 2, G 3, EDF 1, EDF 2 and EDF 3, the gas loops of PEGASE and EL 4. The different parameters are studied in detail in order to obtain a maximum sensitivity and to make it possible to construct detection devices having the maximum operational reliability and requiring the minimum maintenance. The primary applications of these devices are examined in the case of the above-mentioned reactors. (author) [French] La Detection des Ruptures de Gaines (D. R. G.) est un aspect important de la securite des piles et plus particulierement des piles refroidies par un gaz. Une detection rapide et sure constitue aussi un element d'amelioration du rendement des centrales nucleaires productrices d'energie electrique. Parmi les nombreuses methodes de detection des ruptures de gaines, la mesure de la concentration dans le fluide caloporteur des gaz de fission a vie courte s'est revelee comme la plus sensible et la plus rapide. Une etude systematique des detecteurs a collection electrostatique des descendants des gaz de fission a ete entreprise en vue d'equiper les piles EL 2, G 3, EDF 1, EDF 2 et EDF 3, les boucles a gaz de la pile Pegase et la pile EL 4. Les divers parametres sont etudies en detail pour obtenir une sensibilite maximum et permettre la realisation de dispositifs de detection ayant le maximum de securite de

  14. Can-rupture detection in gas-cooled nuclear reactors; La detection des ruptures de gaine dans les piles nucleaires refroidies par gaz

    Energy Technology Data Exchange (ETDEWEB)

    Roguin, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-07-01

    Can-rupture detection (DRG) is one important aspect of pile safety, more particularly so in the case of gas-cooled reactors. A rapid and sure detection constitutes also an improvement as far as the efficiency of electricity-producing nuclear power stations are concerned. Among the numerous can-rupture detection methods, that based on the measurement of the concentration of short-lived fission gases in the heat-carrying fluid has proved to be the most sensitive and the most rapid. A systematic study of detectors based on the electrostatic collection of the daughter products of fission gases has been undertaken with a view to equip the reactors EL 2, G 3, EDF 1, EDF 2 and EDF 3, the gas loops of PEGASE and EL 4. The different parameters are studied in detail in order to obtain a maximum sensitivity and to make it possible to construct detection devices having the maximum operational reliability and requiring the minimum maintenance. The primary applications of these devices are examined in the case of the above-mentioned reactors. (author) [French] La Detection des Ruptures de Gaines (D. R. G.) est un aspect important de la securite des piles et plus particulierement des piles refroidies par un gaz. Une detection rapide et sure constitue aussi un element d'amelioration du rendement des centrales nucleaires productrices d'energie electrique. Parmi les nombreuses methodes de detection des ruptures de gaines, la mesure de la concentration dans le fluide caloporteur des gaz de fission a vie courte s'est revelee comme la plus sensible et la plus rapide. Une etude systematique des detecteurs a collection electrostatique des descendants des gaz de fission a ete entreprise en vue d'equiper les piles EL 2, G 3, EDF 1, EDF 2 et EDF 3, les boucles a gaz de la pile Pegase et la pile EL 4. Les divers parametres sont etudies en detail pour obtenir une sensibilite maximum et permettre la realisation de dispositifs de detection ayant le maximum de securite de fonctionnement et le

  15. New results concerning the behaviour of fission gases in in-pile UO{sub 2} at high temperatures; Resultats nouveaux sur le comportement des gaz de fission a haute temperature dans l'UO{sub 2} en pile

    Energy Technology Data Exchange (ETDEWEB)

    Soulhier, R; Schurenkamper, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    The authors consider in the first part the various phenomena giving rise to the production of fission gases towards the exterior of nuclear fuels. The following aspects are dealt with: diffusion, for which is considered the influence of the predecessors of the radioactive gases, the fission recoil, atom expulsion along the fission paths and the evaporation. In the second part the authors present the results obtained on UO{sub 2} samples subjected to irradiation at temperatures of between 150 and 2000 deg C: - At low temperatures the variation of the amount produced as a function of the half-life of the isotopes studied shows that recoil is hot the only cause of gas production. - Above 1800 deg C, a weight loss by evaporation has been observed and the influence of this phenomenon on gas liberation has been studied; thus the fraction of {sup 135}Xe liberated at 2000 deg C by processes other than evaporation is of the order of 10 per cent. - The influence of the various mechanism on the overall effect as a function of temperature is discussed. (authors) [French] Dans une premiere partie, les auteurs etudient les differents phenomenes pouvant donner lieu au degagement des gaz de fission hors d'un combustible. Sont traites successivement: la diffusion, pour laquelle on discute l'influence des predecesseurs des gaz radioactifs, le recul de fission, l'expulsion des atomes le long des trajets de fission et l'evaporation. Dans une deuxieme partie ils exposent les resultats obtenus sur des echantillons d'UO{sub 2} portes sous irradiation a des temperatures comprises entre 150 deg C et 2000 deg C: - A basse temperature la variation de la quantite degagee suivant la periode des isotopes etudies montre que le recul n'est pas la seule cause du degagement des gaz. - Au-dessus de 1800 deg C on a note une perte de poids par evaporation et on a evalue l'influence de ce phenomene sur la liberation des gaz: ainsi la fraction du {sup 135}Xe liberee a 2000 deg C par d'autres processus

  16. Silver Nanopartical over AuFON Substrate for Enhanced Raman Readout and Their Application in Pesticide Monitoring

    Directory of Open Access Journals (Sweden)

    Kun Guo

    2015-04-01

    Full Text Available Surface-enhanced Raman detection of thiram is demonstrated by using Ag-nanoparticles (Ag NPs on Au film over nanosphere (AuFON substrate as the hybrid substrate. The SERS signal of the Ag NPs attached to solid supports is studied. The close coupling together of thousands of Ag NPs on AuFON leads to the generation of hot spots for SERS. The Ag NPs on AuFON can be applied to detect rhodamine-6G (R6G with the detection limitation of 10−11 M and the pesticide thiram in acetone with a detection limit of as low as 0.24 ppm, which is much lower than the maximal residue limit (MRL of 7 ppm in fruit prescribed by the U.S. Environmental Protection Agency (EPA. The hybrid substrates are shown to be highly sensitive for the detection of thriam, which produce highly enhanced Raman signals with good uniformity and reproducibility due to having plenty of hot spots on its surface.

  17. Controlled Vectorial Electron Transfer and Photoelectrochemical Applications of Layered Relay/Photosensitizer-Imprinted Au Nanoparticle Architectures on Electrodes.

    Science.gov (United States)

    Metzger, Tzuriel S; Tel-Vered, Ran; Willner, Itamar

    2016-03-23

    Two configurations of molecularly imprinted bis-aniline-bridged Au nanoparticles (NPs) for the specific binding of the electron acceptor N,N'-dimethyl-4,4'-bipyridinium (MV(2+) ) and for the photosensitizer Zn(II)-protoporphyrin IX (Zn(II)-PP-IX) are assembled on electrodes, and the photoelectrochemical features of the two configurations are discussed. Configuration I includes the MV(2+) -imprinted Au NPs matrix as a base layer, on which the Zn(II)-PP-IX-imprinted Au NPs layer is deposited, while configuration II consists of a bilayer corresponding to the reversed imprinting order. Irradiation of the two electrodes in the presence of a benzoquinone/benzohydroquinone redox probe yields photocurrents of unique features: (i) Whereas configuration I yields an anodic photocurrent, the photocurrent generated by configuration II is cathodic. (ii) The photocurrents obtained upon irradiation of the imprinted electrodes are substantially higher as compared to the nonimprinted surfaces. The high photocurrents generated by the imprinted Au NPs-modified electrodes are attributed to the effective loading of the imprinted matrices with the MV(2+) and Zn(II)-PP-IX units and to the effective charge separation proceeding in the systems. The directional anodic/cathodic photocurrents are rationalized in terms of vectorial electron transfer processes dictated by the imprinting order and by the redox potentials of the photosensitizer/electron acceptor units associated with the imprinted sites in the two configurations. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Application de la pensée systémique au renforcement de l'équité ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    sida ou à l'accroissement des taux de vaccination contre des maladies infantiles courantes. Mais en fin de ... Stratégies d'amélioration de la qualité des services de santé - tirer des enseignements des expériences vécues en Uruguay et au Chili.

  19. Magnetic gold nanocatalyst (nanocat-Fe–Au): catalytic applications for the oxidative esterification and hydrogen transfer reactions

    Science.gov (United States)

    An efficient and sustainable protocol is described for the oxidative esterification of aldehydes and the reduction of aromatic nitro compounds that uses magnetically separable and reusable maghemite-supported gold nanocatalyst (nanocat-Fe-Au) under mild conditions. The complex ch...

  20. Fast and facile preparation of CTAB based gels and their applications in Au and Ag nanoparticles synthesis

    Energy Technology Data Exchange (ETDEWEB)

    Upadhyay, Ravi Kant, E-mail: rkupadhyay85@gmail.com [Department of Chemistry, School of Natural Sciences, Shiv Nadar University, Gautam Budh Nagar, 201314 Uttar Pradesh (India); Soin, Navneet, E-mail: n.soin@bolton.ac.uk [Knowledge Centre for Materials Chemistry (KCMC), Institute for Materials Research and Innovation (IMRI), University of Bolton, Deane Road, Bolton BL3 5AB (United Kingdom); Saha, Susmita, E-mail: ssaha@bose.res.in [Department of Condensed Matter Physics and Material Sciences, S. N. Bose National Centre for Basic Sciences, Block JD, Sector III, Salt Lake, Kolkata 700 098 (India); Barman, Anjan, E-mail: abarman@bose.res.in [Department of Condensed Matter Physics and Material Sciences, S. N. Bose National Centre for Basic Sciences, Block JD, Sector III, Salt Lake, Kolkata 700 098 (India); Sinha Roy, Susanta, E-mail: susanta.roy@snu.edu.in [Department of Physics, School of Natural Sciences, Shiv Nadar University, Gautam Budh Nagar, 201314 Uttar Pradesh (India)

    2015-04-15

    We have demonstrated that the gel-like mesophase of Cetyltrimethylammonium bromide (CTAB) can be synthesized by judicial adjustment of water to surfactant molar ratio (W{sub 0}), without using any additional salts, gelating agents or co-surfactants. Gel formation was found to be highly dependent on the water to surfactant molar ratio (W{sub 0}), with the lowest value of W{sub 0} (41.5) resulting in rapid gel formation. Environmental scanning electron microscope (ESEM) analysis revealed that the gel was comprised of interconnected cylindrical structures. The presence of hydrogen bonding in the gel-like mesophase was confirmed by Fourier Transform Infrared spectroscopy (FTIR) analysis. Rheology measurements revealed that all the gel samples were highly viscoelastic in nature. Furthermore, Au and Ag containing CTAB gels were explored as precursors for the preparation of spherical Gold (Au) and Silver (Ag) nanoparticles using Sodium borohydride (NaBH{sub 4}) as reducing agent. The effects of NaBH{sub 4} concentration on the particle size and morphology of the Au and Ag nanoparticles have also been studied. - Highlights: • A facile synthesis of CTAB based gel-like mesophase is reported. • CTAB gels were obtained by adjusting water to surfactant molar ratio (W{sub 0}). • FTIR analysis revealed that hydrogen bonding plays a key role in gel formation. • Au, Ag nanoparticles were synthesized by using CTAB gel and NaBH{sub 4}.

  1. How Does Amino Acid Ligand Modulate Au Core Structure and Characteristics in Peptide Coated Au Nanocluster?

    Science.gov (United States)

    Li, Nan; Li, Xu; Zhao, Hongkang; Zhao, Lina

    2018-03-01

    The atomic structures and the corresponding physicochemical properties of peptide coated Au nanoclusters determine their distinctive biological targeting applications. To learn the modulation of amino acid ligand on the atomic structure and electronic characteristics of coated Au core is the fundamental knowledge for peptide coated Au nanocluster design and construction. Based on our recent coated Au nanocluster configuration study (Nanoscale, 2016, 8, 11454), we built the typically simplified Au13(Cys-Au-Cys) system to more clearly learn the basic modulation information of amino acid ligand on Au core by the density functional theory (DFT) calculations. There are two isomers as ligand adjacent bonding (Iso1) and diagonal bonding (Iso2) to Au13 cores. The geometry optimizations indicate the adjacent bonding Iso1 is more stable than Iso2. More important, the Au13 core of Iso1 distorts much more significantly than that of Iso2 by Cys-Au-Cys bonding through the root-mean-square deviation (RMSD) analysis, which modulate their electronic characteristics in different ways. In addition, the frontier molecular orbital results of Au13(Cys-Au-Cys) isomers confirm that the Au cores mainly determine the blue shifts of Au13(Cys-Au-Cys) systems versus the original Au13 core in their UV-visible absorption spectrum studies. The configuration of Au13 core performs deformation under Cys-Au-Cys ligand modulation to reach new stability with distinct atomic structure and electronic properties, which could be the theory basis for peptide coated AuNCs design and construction.

  2. Ab initio simulations of scanning-tunneling-microscope images with embedding techniques and application to C58-dimers on Au(111).

    Science.gov (United States)

    Wilhelm, Jan; Walz, Michael; Stendel, Melanie; Bagrets, Alexei; Evers, Ferdinand

    2013-05-14

    We present a modification of the standard electron transport methodology based on the (non-equilibrium) Green's function formalism to efficiently simulate STM-images. The novel feature of this method is that it employs an effective embedding technique that allows us to extrapolate properties of metal substrates with adsorbed molecules from quantum-chemical cluster calculations. To illustrate the potential of this approach, we present an application to STM-images of C58-dimers immobilized on Au(111)-surfaces that is motivated by recent experiments.

  3. Black and blue gas, the Gaz de France story during the last forty years

    International Nuclear Information System (INIS)

    Beltran, A.; Williot, J.P.

    1992-01-01

    This book narrates Gaz de France story during the last forty years. The author describes the great events such change from coal gas to methane (black and blue gas), building of a national distribution network, natural gas promoting, negotiating on great supply contracts, research programs. 61 refs., 12 figs., 29 photos

  4. Report of visiting Laboratoire de Physique des Gaz et des Plasmas, Universite Paris-Sud

    International Nuclear Information System (INIS)

    Ferreira, J.L.

    1991-03-01

    The activities carried out by identification mission to the Laboratoire de Physique des Gaz et des Plasmas (LPGP) of Paris-Sud University are related. The mission is part of the project of Study on Plasma wave and Plasma turbulence which is part of international agreement between CAPES and COFECUB in France. (M.C.K.)

  5. The graphene/Au/Ni interface and its application in the construction of a graphene spin filter

    International Nuclear Information System (INIS)

    Rybkina, A A; Rybkin, A G; Adamchuk, V K; Marchenko, D; Shikin, A M; Varykhalov, A; Sánchez -Barriga, J

    2013-01-01

    A modification of the contact of graphene with ferromagnetic electrodes in a model of the graphene spin filter allowing restoration of the graphene electronic structure is proposed. It is suggested for this aim to intercalate into the interface between the graphene and the ferromagnetic (Ni or Co) electrode a Au monolayer to block the strong interaction between the graphene and Ni (Co) and, thus, prevent destruction of the graphene electronic structure which evolves in direct contact of graphene with Ni (Co). It is also suggested to insert an additional buffer graphene monolayer with the size limited by that of the electrode between the main graphene sheet providing spin current transport and the Au/Ni electrode injecting the spin current. This will prevent the spin transport properties of graphene from influencing contact phenomena and eliminate pinning of the graphene electronic structure relative to the Fermi level of the metal, thus ensuring efficient outflow of injected electrons into the graphene. The role of the spin structure of the graphene/Au/Ni interface with enhanced spin–orbit splitting of graphene π states is also discussed, and its use is proposed for additional spin selection in the process of the electron excitation. (paper)

  6. Highly selective epoxidation of styrene over mesoporous Au-Ti-SBA-15 via photocatalysis process: Synthesis, characterization, and catalytic application

    Energy Technology Data Exchange (ETDEWEB)

    Guo Yajie; Liu Zhengwang [School of Chemistry and Materials Science, Huaibei Normal University, Huaibei 235000, Anhui (China); Wang Guangjian, E-mail: wgj2260@chnu.edu.cn [School of Chemistry and Materials Science, Huaibei Normal University, Huaibei 235000, Anhui (China); Huang Yanhog; Kang Fangfang [School of Chemistry and Materials Science, Huaibei Normal University, Huaibei 235000, Anhui (China)

    2011-11-15

    Highly ordered Au-Ti-SBA-15 mesoporous molecular sieves were successfully synthesized by one-pot hydrothermal synthesis in acid medium, and were characterized by XRD, UV-vis, SEM, element-mapping, HRTEM, N{sub 2} adsorption, XPS, {sup 29}Si MAS NMR, NH{sub 3}-TPD and FT-IR. The as-prepared Au-Ti-SBA-15 samples were possessed of highly ordered mesostructures with larger pore diameter, pore volume and uniform mesopore size distribution. In the oxidation of styrene with H{sub 2}O{sub 2} as the oxidant over Au-Ti-SBA-15 catalyst under photo-irradiation, reaction parameters, such as molar ratio of H{sub 2}O{sub 2} to styrene, reaction time, solvent, the amount of catalyst, catalyst species, and the amount of 3% NaOH, were conditioned at length. As a result, highly selective epoxidation of styrene over catalyst was carried out perfectly for 10 min with high TOF of 4.75 Multiplication-Sign 10{sup 3} min{sup -1}.

  7. Central Au on Au collisions

    Energy Technology Data Exchange (ETDEWEB)

    Alard, J.P.; Amouroux, V. [Labo de Phys. Corp., IN2P3-CRNS, Univ. Blaise Pascal, Clermont-Fd. (France); Basrak, Z. [Rudjer Boskovic Institute, Zagreb (Croatia)] [and others; FOPI-Collaboration

    1995-02-06

    In nucleus-nucleus collisions the initial relative kinetic energy of target and projectile is available for internal excitation of the interacting system; it is however still not well established to what extent local equilibrium and thermalisation occur. Local equilibrium is of interest to derive, within the formalism of transport equations and of the equation of state, (EOS), general properties of compressed and excited nuclear matter. Such approach describes in relatively simple terms the complex many body interactions occuring within extended baryonic and hadronic (or quark) matter. For a basic microscopic understanding it is highly desirable to investigate the elementary in-medium interactions in relation to the free elementary processes. Excitation function measurements of central collisions between the heaviest available nuclei (like Au on Au), supply the best ground for such studies: the highest degree of thermalisation and compression is expected for such reactions. The consideration presented here of energy thermalisation and of an expanding system clusterizing at freeze-out in a situation close to the liquid gas phase transition can be of interest to astrophysics as well as to the quark gluon plasma deconfinement studied in nucleus-nucleus collisions at the higher energy regime of CERN and Brookhaven. (orig.).

  8. Containment for Heavy-Water Gas-Cooled Reactors; Le Confinement des Reacteurs a Eau Lourde Refroidis par Gaz

    Energy Technology Data Exchange (ETDEWEB)

    Verstraete, P.; Lehmann, D.; Lafitte, R. [Bonard et Gardel, Ingenieurs-Conseils, Lausanne (Switzerland)

    1967-09-15

    par gaz sont passes en revue dans le but d'etablir les specifications des enceintes de confinement en fonction des conditions des sites disponibles en Suisse pour la construction de centrales nucleaires. Ces specifications sont etablies d'apres les taux de dose consideres comme admissibles pour les populations vivant aux environs de la centrale en cas d 'accident grave du reacteur, en se basant sur des conditions meteorologiques et demographiques representatives de la plupart des sites du pays. Differents modes de construction de l ' enceinte de confinement, prenant en consideration les conditions qui s'etablissent dans l'enceinte a la suite de l'accident maximal concevable du reacteur, sont consideres. Les enceintes etudiees sont les suivantes: beton precontraint; beton precontraint avec coupole d'acier; beton precontraint avec peau d' etancheite interieure en acier; acier avec ecran lateral en beton pour la protection contre les radiations; et double confinement. Le degre d'etancheite des enceintes etudiees a ete considere comme une caracteristique lie e au mode de construction particulier et non comme une valeur prescrite en vue de laquelle la construction devait etre adaptee. Les caracteristiques d'etancheite de chaque enceinte sont estimees et les prix de chaque construction ont ete determines sur la base de plans precis avec le concours de diverses entrepises specialisees. L'estimation de l'efficacite des differentes enceintes, sous l'an gle de la securite, a ete faite en prenant en consideration differentes procedures en cas d' accident parmi lesquelles on citera principalement le rejet atmospherique, au travers de filtres adequats, et la decontamination de l 'atmosphere de l 'enceinte par recyclage dans des batteries de filtres. Une dizaine de cas, correspondant a differentes combinaisons de modes de construction et procedures en cas d'accident, font l 'objet d'une comparaison tres detaillee qui a ete realisee grace a un programme pour ordinateur electronique

  9. Approche économique de l'exploration des stockages souterrains de gaz en nappe aquifère Economic Approach to Exploration for Underground Gas Storage Facilities in Aquifers

    Directory of Open Access Journals (Sweden)

    Colonna J.

    2006-11-01

    Full Text Available Dans le cadre de la recherche des stockages souterrains de gaz, le Département Réservoirs Souterrains de Gaz de France est amené à établir un programme d'exploration destiné à sélectionner définitivement, et au moindre coût, les structures capables de satisfaire la demande. Cette sélection passe par une estimation des probabilités de rejet ou d'abandon affectant les différentes structures susceptibles de donner lieu à une exploration. Il faut ensuite constituer le programme d'exploration de chacun des sites retenus après cet examen; ce programme consiste en une liste d'opérations (forage, sismique, essai hydraulique, forage à faible profondeur etc. qui mettront le plus vite possible en évidence : - d'une part les défauts; - d'autre part les principales caractéristiques techniques de la structure étudiée. La règle est d'atteindre la décision sur la faisabilité du site au stockage avec le moindre coût d'exploration. Pour ce faire, une analyse détaillée des causes potentielles d'abandon (recensement des défauts permet de choisir les opérations à effectuer, et d'associer à chacun des défauts recensés, l'opération ou l'ensemble d'opérations permettant de le détecter de façon certaine. Alors les estimateurs économiques tels que l'espérance de dépense, le risque financier, l'espérance de gain, sont calculés pour chacun des programmes, en vue de déterminer l'ordre d'exécution optimal des opérations. L'intérêt d'une telle approche, en ce qui concerne la réduction des dépenses d'exploration, est illustré par un exemple. As part of its work concerning the search for underground gas storage sites, the Underground Storage Department of Gaz de France has established an exploration program for the definitive and lowcost selection of suitable geological structures. This selection involves estimating probabilities of rejecting or abandoning different structures liable to be targets for exploration. The

  10. Heat transfer by gas-liquid mixture in forced turbulent flow with weak vaporization of the liquid phase (1962); Transfert de chaleur par melange de liquide et de gaz en convection forcee turbulente avec faible vaporisation de la phase liquide (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Huyghe, J; Mondin, G [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1962-07-01

    The present study deals with measures of heat transfer and pressure drop in two-phase liquid flow. The stream is of annular dispersed type, obtained by introducing a small quantity of liquid in a gas turbulent flow. The heat transfer experiments are performed without vaporization of the liquid phase. A notable improvement of the heat transfer coefficient of such a stream is observed, compared with a gas-alone or liquid-alone flow. The improvement concerning the gas-alone is of about 20 when it is compared with the same gas Reynolds's number, of about 8 when it is compared with the same total mass flow rate. A hydrodynamic study of the flow pattern lets us know the original structure of the flow, and allows to foresee the experimental results by means of a simplified theory. (authors) [French] II est fait etat de mesures de transfert thermique et de perte de charge dans un ecoulement en double phase gaz-liquide. L'ecoulement est du type annulaire disperse, obtenu par injection d'une faible quantite de liquide dans un ecoulement gazeux en regime turbulent. Les experiences de transfert thermique sont menees sans vaporisation de la phase liquide. On note une amelioration sensible du coefficient de transfert thermique dans un tel ecoulement par rapport a un ecoulement de gaz seul ou de liquide seul. L'augmentation est de l'ordre de 20 par rapport au gaz seul si on opere a meme nombre de REYNOLDS du gaz, de l'ordre de 8 si on opere a meme debit massique total. Une etude hydrodynamique rapide de l'ecoulement permet de connaitre la structure originale de l'ecoulement, puis de prevoir par une theorie simplifiee le phenomene thermique observe. (auteurs)

  11. General design and main problems of a gas-heavy-water power reactor contained in a pressure vessel; Conception generale et principaux problemes d'un reacteur de puissance eau lourde-gaz contenu dans un caisson resistant

    Energy Technology Data Exchange (ETDEWEB)

    Roche, R; Gaudez, J C [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    In the framework of research carried out on a CO{sub 2}-cooled power reactor moderated by heavy water, the so-called 'pressure vessel' solution involves the total integration of the core, of the primary circuit (exchanges and blowers) and of the fuel handling machine inside a single, strong, sealed vessel made of pre-stressed concrete. A vertical design has been chosen: the handling 'attic' is placed above the core, the exchanges being underneath. This solution makes it possible to standardize the type of reactor which is moderated by heavy-water or graphite and cooled by a downward stream of carbon dioxide gas; it has certain advantages and disadvantages with respect to the pressure tube solution and these are considered in detail in this report. Extrapolation presents in particular.problems due specifically to the heavy water (for example its cooling,its purification, the balancing of the pressures of the heavy water and of the gas, the assembling of the internal structures, the height of the attic, etc. (authors) [French] Dans le cadre des etudes d'un reacteur de puissance modere a l'eau lourde et refroidi-au gaz carbonique, la solution dite 'en caisson' consiste en une integration totale du coeur, du circuit primaire (echangeurs et soufflantes) et du dispositif de manutention du combustible a l'interieur d'un meme caisson etanche et resistant en beton precontraint. La disposition envisagee est verticale; le grenier de manutention est dispose au-dessus du coeur, les echangeurs en dessous. Cette solution, qui permet d'uniformiser les types de reacteurs moderes a l'eau lourde ou au graphite et refroidis par une circulation descendante de gaz carbonique presente, par rapport a la solution a tube de force, des avantages et des inconvenients qui sont analyses dans cette etude. L'extrapolation pose, en particulier, des problemes specifiques a l'eau lourde (tels que son refroidissement, son epuration, l'equilibrage des pression entre l'eau lourde et le gaz, le montage

  12. General design and main problems of a gas-heavy-water power reactor contained in a pressure vessel; Conception generale et principaux problemes d'un reacteur de puissance eau lourde-gaz contenu dans un caisson resistant

    Energy Technology Data Exchange (ETDEWEB)

    Roche, R.; Gaudez, J.C. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    In the framework of research carried out on a CO{sub 2}-cooled power reactor moderated by heavy water, the so-called 'pressure vessel' solution involves the total integration of the core, of the primary circuit (exchanges and blowers) and of the fuel handling machine inside a single, strong, sealed vessel made of pre-stressed concrete. A vertical design has been chosen: the handling 'attic' is placed above the core, the exchanges being underneath. This solution makes it possible to standardize the type of reactor which is moderated by heavy-water or graphite and cooled by a downward stream of carbon dioxide gas; it has certain advantages and disadvantages with respect to the pressure tube solution and these are considered in detail in this report. Extrapolation presents in particular.problems due specifically to the heavy water (for example its cooling,its purification, the balancing of the pressures of the heavy water and of the gas, the assembling of the internal structures, the height of the attic, etc. (authors) [French] Dans le cadre des etudes d'un reacteur de puissance modere a l'eau lourde et refroidi-au gaz carbonique, la solution dite 'en caisson' consiste en une integration totale du coeur, du circuit primaire (echangeurs et soufflantes) et du dispositif de manutention du combustible a l'interieur d'un meme caisson etanche et resistant en beton precontraint. La disposition envisagee est verticale; le grenier de manutention est dispose au-dessus du coeur, les echangeurs en dessous. Cette solution, qui permet d'uniformiser les types de reacteurs moderes a l'eau lourde ou au graphite et refroidis par une circulation descendante de gaz carbonique presente, par rapport a la solution a tube de force, des avantages et des inconvenients qui sont analyses dans cette etude. L'extrapolation pose, en particulier, des problemes specifiques a l'eau lourde (tels que son refroidissement, son epuration

  13. Precursor polymers for the carbon coating of Au@ZnO multipods for application as active material in lithium-ion batteries.

    Science.gov (United States)

    Oschmann, Bernd; Tahir, Muhammad Nawaz; Mueller, Franziska; Bresser, Dominic; Lieberwirth, Ingo; Tremel, Wolfgang; Passerini, Stefano; Zentel, Rudolf

    2015-06-01

    The synthesis of statistical and block copolymers based on polyacrylonitrile, as a source for carbonaceous materials, and thiol-containing repeating units as inorganic nanoparticle anchoring groups is reported. These polymers are used to coat Au@ZnO multipod heteroparticles with polymer brushes. IR spectroscopy and transmission electron microscopy prove the successful binding of the polymer onto the inorganic nanostructures. Thermogravimetric analysis is applied to compare the binding ability of the block and statistical copolymers. Subsequently, the polymer coating is transformed into a carbonaceous (partially graphitic) coating by pyrolysis. The obtained carbon coating is characterized by Raman spectroscopy and energy-dispersive X-ray (EDX) spectroscopy. The benefit of the conformal carbon coating of the Au@ZnO multipods regarding its application as lithium-ion anode material is revealed by performing galvanostatic cycling, showing a highly enhanced and stabilized electrochemical performance of the carbon-coated particles (still 831 mAh g(-1) after 150 cycles) with respect to the uncoated ones (only 353 mAh g(-1) after 10 cycles). © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  14. La fonction logistique, un outil performant d'analyse et de prévision à moyen terme. Application à la production de pétrole et de gaz aux Etats-Unis, en URSS et dans d'autres pays The Logistic Function, an Efficient Medium-Range Analysis and Forecasting Method

    Directory of Open Access Journals (Sweden)

    Seguret J.

    2006-11-01

    Full Text Available A partir de la similitude observée entre l'évolution de la production pétrolière d'un pays et celle de la pénétration d'un produit dans un marché (fonction logistique, l'auteur expose le principe d'une méthode originale qui permet, sous certaines conditions, de prévoir quelle sera la production annuelle probable d'un pays producteur à un horizon de 10 à 15 ans. La validité de cette méthode est d'abord démontrée sur l'exemple de la production pétrolière aux Etats-Unis. Elle est ensuite illustrée par les résultats obtenus pour un certain nombre de pays : production future de gaz aux Etats-Unis, production pétrolière future du Canada, de l'URSS, du Venezuela et de l'ensemble du monde hors Moyen-Orient. On the basis of the similarity observed between the variation in the petroleum production of a country and that of the penetration of a product into the market (logistic function, this article describes the principle of an original method that can be used, under certain conditions, to forecast the probable annual production of a producing country in 10 to 15 years. The validity of this method is first demonstrated for the example of oil production in the United States. It is then illustrated by results obtained for various other countries, i. e. future gas production in the United States, future oil production of Canada, the Soviet Union, Venezuela and the world as a whole outside of the Middle East.

  15. Corrosion of magnesium and some magnesium alloys in gas cooled reactors; Corrosion du magnesium et de certains de ses alliages dans les piles refroidies par gaz

    Energy Technology Data Exchange (ETDEWEB)

    Caillat, R; Darras, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    The results of corrosion tests on magnesium and some magnesium alloys (Mg-Zr and Mg-Zr-Zn) in moist air (like G1 reactor) and in CO{sub 2}: (like G2, G3, EDF1 reactors) are reported. The maximum temperature for exposure of magnesium to moist air without any risk of corrosion is 350 deg. C. Indeed, the oxidation rate follows a linear law above 350 deg. C although it reaches a constant level and keeps on very low under 350 deg. C. However, as far as corrosion is concerned this temperature limit can be raised up to 500 deg. C if moist air is very slightly charged with fluorinated compounds. Under pressure of CO{sub 2}, these three materials oxidate much more slowly even if 500 deg. C is reached. The higher is the temperature, the higher is the constant level of the weight increase and the quicker is reached this one. However, Mg-Zr alloy behaves quite better than pure magnesium and especially than Mg-Zr-Zn alloy. (author)Fren. [French] On expose essentiellement les resultats d'etudes sur la corrosion du magnesium et de certains de ses alliages (Mg-Zr et Mg-Zr-Zn) dans l'air humide (cas de la pile G1) et dans le gaz carbonique (cas des piles G2, G3, EDF1, etc...). La temperature limite d'exposition du magnesium dans l'air humide sans risque de corrosion se situe a 350 deg. C; en effet l'oxydation a un caractere lineaire au-dessus de cette temperature, alors qu'elle atteint un palier et reste tres limitee au-dessous de 350 deg. C. Du point de vue de la corrosion, cette temperature limite d'emploi peut cependant etre elevee jusqu'a 500 deg. C si l'on introduit dans l'air humide de tres faibles teneurs de composes fluores. Dans le gaz carbonique sous pression, l'oxydation est beaucoup plus faible, meme jusqu'a 50g. C pour les trois materiaux: l'augmentation de poids atteint un palier d'autant plus eleve et ceci d'autant plus rapidement que la temperature est elle-meme plus elevee. Cependant, l'alliage Mg-Zr se comporte nettement mieux que le magnesium pur et surtout que l

  16. Corrosion of magnesium and some magnesium alloys in gas cooled reactors; Corrosion du magnesium et de certains de ses alliages dans les piles refroidies par gaz

    Energy Technology Data Exchange (ETDEWEB)

    Caillat, R.; Darras, R. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    The results of corrosion tests on magnesium and some magnesium alloys (Mg-Zr and Mg-Zr-Zn) in moist air (like G1 reactor) and in CO{sub 2}: (like G2, G3, EDF1 reactors) are reported. The maximum temperature for exposure of magnesium to moist air without any risk of corrosion is 350 deg. C. Indeed, the oxidation rate follows a linear law above 350 deg. C although it reaches a constant level and keeps on very low under 350 deg. C. However, as far as corrosion is concerned this temperature limit can be raised up to 500 deg. C if moist air is very slightly charged with fluorinated compounds. Under pressure of CO{sub 2}, these three materials oxidate much more slowly even if 500 deg. C is reached. The higher is the temperature, the higher is the constant level of the weight increase and the quicker is reached this one. However, Mg-Zr alloy behaves quite better than pure magnesium and especially than Mg-Zr-Zn alloy. (author)Fren. [French] On expose essentiellement les resultats d'etudes sur la corrosion du magnesium et de certains de ses alliages (Mg-Zr et Mg-Zr-Zn) dans l'air humide (cas de la pile G1) et dans le gaz carbonique (cas des piles G2, G3, EDF1, etc...). La temperature limite d'exposition du magnesium dans l'air humide sans risque de corrosion se situe a 350 deg. C; en effet l'oxydation a un caractere lineaire au-dessus de cette temperature, alors qu'elle atteint un palier et reste tres limitee au-dessous de 350 deg. C. Du point de vue de la corrosion, cette temperature limite d'emploi peut cependant etre elevee jusqu'a 500 deg. C si l'on introduit dans l'air humide de tres faibles teneurs de composes fluores. Dans le gaz carbonique sous pression, l'oxydation est beaucoup plus faible, meme jusqu'a 50g. C pour les trois materiaux: l'augmentation de poids atteint un palier d'autant plus eleve et ceci d'autant plus rapidement que la temperature est elle-meme plus elevee. Cependant, l

  17. Heavy water moderated gas-cooled reactors; Filiere eau lourde - gaz

    Energy Technology Data Exchange (ETDEWEB)

    Bailly du Bois, B; Bernard, J L; Naudet, R; Roche, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    long terme de reacteurs rapides, s'est engagee egalement dans le developpement des reacteurs a eau lourde refroidis par gaz, qui semblent presenter les meilleures perspectives pour le moyen terme. L'economie de ces reacteurs, comme dans le cas du graphite, repose sur l'utilisation d'uranium naturel ou extremement peu enrichi. L'eau lourde permet d'en tirer le maximum d'avantages, tout en donnant lieu grace a ses performances plus poussees a des perspectives de developpement tres interessantes. Une centrale prototype EL 4 (70 MWe) est actuellement en construction: elle est decrite en detail dans un autre memoire. La presente communication fait le point du programme consacre en France au developpement de cette filiere. On indique d'abord quelles sont les raisons qui ont conduit a choisir ce type de reacteur: on montre l'Interet de la filiere, en soulignant ses atouts et ses difficultes. Passant en revue les principaux problemes technologiques et les travaux de developpement qui leur sont consacres, on analyse ensuite les resultats deja acquis et les points restant a confirmer. EL 4 est la premiere grande realisation: sa construction constitue une etape importante, aussi bien du point de vue demonstration de performances que possibilites d'experimentation et d'epreuve. Mais deja se pose le probleme de la conception d'une centrale de grande puissance unitaire. On a etudie a la fois l'adaptation ou l'amelioration des solutions mecaniques mises en oeuvre dans EL 4 et des variantes dont quelques-unes reposent sur des conceptions assez differentes. On indique ensuite quelles sont les caracteristiques envisagees pour une grande centrale dans l'etat actuel de la technique, compte tenu des etudes d'optimisation en cours. Des possibilites d'amelioration techniques existent d'ailleurs notamment en ce qui concerne les materiaux, ce qui pourrait conduire a des performances encore plus interessantes. Quelques perspectives a plus long terme sont evoquees. Finalement on aborde les

  18. Spectral Matrix Filtering Applied to Vsp Processing Application du filtrage matriciel au traitement des profils sismiques verticaux

    Directory of Open Access Journals (Sweden)

    Glangeaud F.

    2006-11-01

    données et de séparer ces signaux. Nous montrons que les signaux peuvent être automatiquement séparés sans connaissance a priori sur leurs vitesses apparentes, en fonction du produit scalaire (calculé dans le domaine fréquentiel et de l'amplitude relative des signaux. Nous montrons des exemples d'application sur des données de sismique de puits. Le filtrage matriciel est effectué dans le domaine fréquentiel en utilisant la matrice spectrale construite à l'aide des intercorrélations des différents enregistrements constituant les données à traiter. Les méthodes d'estimation de la matrice spectrale sont des méthodes de moyenne : moyenne en fréquence (méthode du périodogramme lissé et/ou moyenne en distance (lissage réalisé le long des diagonales de la matrice spectrale. Le lissage en fréquence est obtenu par l'intermédiaire d'une fonction de pondération (par exemple fenêtre de Hanning élevée à une puissance donnée appliquée à chaque corrélation. Les moyennes sont utilisées pour décorréler les signaux et de ce fait favoriser la séparation. Une fois correctement estimée, la matrice spectrale est diagonalisée sur toutes les fréquences du spectre moyenné, et décomposée selon ses vecteurs propres qui sont orthogonaux entre eux et normalisés. Chaque vecteur propre a une valeur propre associée qui représente la répartition d'énergie en fonction de la fréquence du modèle lié au vecteur propre. Le filtrage est réalisé par projection des données sur les différents vecteurs propres issus de la matrice spectrale. Il est à noter cependant que la séparation des différents signaux (projection sur vecteur propre n'est réalisée en terme d'indicatrice sismique que si les événements sismiques sont naturellement orthogonaux et alignés sur les vecteurs propres. Glangeaud et al (1989 ont étudié l'influence des amplitudes relatives et du produit scalaire de deux ondes. Si la vitesse apparente d'une onde est connue, cette derni

  19. Globalization of the natural gas industry; La mondialisation de l`industrie du gaz naturel

    Energy Technology Data Exchange (ETDEWEB)

    Deyirmendjan, J. [Gaz de France (GDF), 75 - Paris (France)

    1997-05-01

    After presenting a panorama of the international gas industry, a description of changes affecting the world gas industry, and an analysis of how environment-related demands give gas an opportunity to become the leading source of energy in the 21. century, Mr Jacques Deyirmendjan, Senior Executive-Vice-President of Gaz de France, tells his interviewer how French industry and national companies are designing their strategies to respond effectively to these changes.

  20. Gaz de France and Ruhrgas have made commitments towards the European commission

    International Nuclear Information System (INIS)

    Anon.

    2004-01-01

    The European Commission's DG Competition has decided to close its investigation into the alleged refusal by the French and German gas companies Gaz de France and Ruhrgas to grant the Norwegian subsidiary of the US gas producer Marathon access to their gas networks. Both companies have offered commitments to improve third party access to their respective transport networks in order to allow customers in France and Germany to benefit more effectively from the opening of the gas markets to competition. (author)

  1. Graphite suspension in carbon dioxide; Suspension de graphite dans le gaz carbonique

    Energy Technology Data Exchange (ETDEWEB)

    Roche, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Moussez, C; Rouvillois, X; Brevet, R [Societe Nationale d' Etude et de Construction de Moteurs d' Aviation (SNECMA), 75 - Paris (France)

    1965-07-01

    Since 1963 the Atomic Division of SNECMA has been conducting, under a contract with the CEA, an experimental work with a two-component fluid comprised of carbon dioxide and small graphite particles. The primary purpose was the determination of basic engineering information pertaining to the stability and the flowability of the suspension. The final form of the experimental loop consists mainly of the following items: a light-phase compressor, a heavy-phase pump, an electrical-resistance type heater section, a cooling heat exchanger, a hairpin loop, a transparent test section and a separator. During the course of the testing, it was observed that the fluid could be circulated quite easily in a broad range of variation of the suspension density and velocity - density from 30 to 170 kg/m{sup 3} and velocity from 2 to 24 m/s. The system could be restarted and circulation maintained without any difficulty, even with the heavy-phase pump alone. The graphite did not have a tendency to pack or agglomerate during operation. No graphite deposition was observed on the wall of the tubing. A long period run (250 hours) has shown the evolution of the particle dimensions. Starting with graphite of surface area around 20 m{sup 2}/g (graphite particles about 1 {mu}), the powder surface area reaches an asymptotic value of 300 m{sup 2}/g (all the particles less than 0.3 {mu}). Moisture effect on flow stability, flow distribution between two parallel channels, pressure drop in straight tubes, recompression ratio in diffusers were also investigated. (author) [French] Depuis 1963 la Division Atomique de la SNECMA conduit, dans le cadre d'un contrat avec le Commissariat A l'Energie Atomique, l'etude experimentale d'une suspension de fines particules de graphite dans le gaz carbonique. L'objectif principal est d'obtenir des informations d'ordre mecanique et technologique sur la mise en oeuvre de l'ecoulement de ce fluide diphase. Le circuit experimental comprend principalement: un

  2. Irreversibility of Gas-Condensate Flow in Gas Cycling Projects: Kinetically Stable Saturation Patterns Irréversibilité des écoulements de gaz à condensat dans les projets de recyclage de gaz : profils stationnaires de saturation

    Directory of Open Access Journals (Sweden)

    Mitlin V.

    2006-12-01

    Full Text Available The dynamics of a two-phase multicomponent reservoir system which is approaching the steady-state flow regime are studied. First, the compositional model is analyzed in the linear approximation, for the case of a small initial deviation from the steady-state regime. An analytical expression is obtained for the characteristic relaxation time. Next, numerical simulations are performed for situations where there is a substantial deviation from the steady-state regime. The linear injection of an enriched gas into a gas-condensate reservoir, followed by the extraction regime, is simulated. It is shown that the change in phase compositions and pressure on the way to equilibrium proceeds with characteristic times of the order of the injection time. However, the change in the saturation and overall composition takes approximately 200 times longer than the injection time. Thus, the reservoir system manifests a spatially inhomogeneous saturation distribution for an abnormally long time. Similar kinetically stable patterns have been also discovered in the nonlinear dynamics of phase transitions, plasma, and thin films. The question of the existence of discontinuous steady states for this multicomponent flow is considered. In the case of a binary mixture, it is shown that such solutions do not exist. Cet article présente une étude de la dynamique d'un réservoir biphasique multiconstituant approchant le régime d'écoulement stationnaire. En premier lieu, nous procédons à une approximation linéaire du modèle compositionnel dans le cas des petites fluctuations autour du régime permanent. Une expression analytique est ainsi obtenue pour le temps caractéristique de transition. Des simulations numériques sont ensuite effectuées pour les déviations importantes par rapport au régime permanent. Nous avons ainsi pu étudier le déplacement linéaire d'un mélange gaz/condensat par un gaz enrichi suivi d'un régime de production. On montre alors que le

  3. Application of Direct Current Atmospheric Pressure Glow Microdischarge Generated in Contact with a Flowing Liquid Solution for Synthesis of Au-Ag Core-Shell Nanoparticles.

    Science.gov (United States)

    Dzimitrowicz, Anna; Jamroz, Piotr; Nyk, Marcin; Pohl, Pawel

    2016-04-06

    A direct current atmospheric pressure glow microdischarge (dc-μAPGD) generated between an Ar nozzle microjet and a flowing liquid was applied to produce Au-Ag core-shell nanoparticles (Au@AgCSNPs) in a continuous flow system. Firstly, operating dc-μAPGD with the flowing solution of the Au(III) ions as the cathode, the Au nanoparticles (AuNPs) core was produced. Next, to produce the core-shell nanostructures, the collected AuNPs solution was immediately mixed with an AgNO₃ solution and passed through the system with the reversed polarity to fabricate the Ag nanoshell on the AuNPs core. The formation of Au@AgCSNPs was confirmed using ultraviolet-visible (UV-Vis) absorbance spectrophotometry, transmission electron microscopy (TEM), and energy-dispersive X-ray spectroscopy (EDS). Three localized surface plasmon resonance absorption bands with wavelengths centered at 372, 546, and 675 nm were observed in the UV-Vis spectrum of Au@AgCSNPs, confirming the reduction of both the Au(III) and Ag(I) ions. The right configuration of metals in Au@AgCSNPs was evidenced by TEM. The Au core diameter was 10.2 ± 2.0 nm, while the thickness of the Ag nanoshell was 5.8 ± 1.8 nm. The elemental composition of the bimetallic nanoparticles was also confirmed by EDS. It is possible to obtain 90 mL of a solution containing Au@AgCSNPs per hour using the applied microdischarge system.

  4. CO{sub 2} solubility in brines of sedimentary basins. Application to CO{sub 2} sequestration (greenhouse gas); Solubilite de CO{sub 2} dans les saumures des bassins sedimentaires. Application au stockage de CO{sub 2} (gaz a effet de serre)

    Energy Technology Data Exchange (ETDEWEB)

    Portier, S.

    2005-04-01

    Large scale combustion of fossil energy leads today to a production of 20 billions tons of CO{sub 2} annually. This increases continuously the CO{sub 2} concentration in the atmosphere, responsible of the observed climatic increase of the temperature since one century. One of the most acceptable solutions consists in the so called CO{sub 2} sequestration in natural geological formations. The control of the process and the prediction of the final quantity of CO{sub 2} trapped in the deep saline aquifers depend on the knowledge of the solubility of acid gas in natural brines in the in situ temperature and pressure conditions. The possible dissolution of acid gases in aqueous phases brings a new complexity, owing to the fact that they behave like electrolytes in aqueous mediums A thermodynamic model for CO{sub 2} solubility is presented. The vapour phase is described by a cubic state equation. The aqueous phase is described by apparent constants of CO{sub 2} dissolution and dissociation, adjusted on literature data. This model is validated by measurements of the British Geological Survey (CO{sub 2} sequestration at Sleipner oil field, North Sea). The results of this study made it possible to calculate the impact of a CO{sub 2} injection on the solubility of calcite by acidification of formation water. The consequences in terms of CO{sub 2} storage capacity of deep saline aquifers are estimated. (author)

  5. Developpement d'une methode de Monte Carlo dependante du temps et application au reacteur de type CANDU-6

    Science.gov (United States)

    Mahjoub, Mehdi

    La resolution de l'equation de Boltzmann demeure une etape importante dans la prediction du comportement d'un reacteur nucleaire. Malheureusement, la resolution de cette equation presente toujours un defi pour une geometrie complexe (reacteur) tout comme pour une geometrie simple (cellule). Ainsi, pour predire le comportement d'un reacteur nucleaire,un schema de calcul a deux etapes est necessaire. La premiere etape consiste a obtenir les parametres nucleaires d'une cellule du reacteur apres une etape d'homogeneisation et condensation. La deuxieme etape consiste en un calcul de diffusion pour tout le reacteur en utilisant les resultats de la premiere etape tout en simplifiant la geometrie du reacteur a un ensemble de cellules homogenes le tout entoure de reflecteur. Lors des transitoires (accident), ces deux etapes sont insuffisantes pour pouvoir predire le comportement du reacteur. Comme la resolution de l'equation de Boltzmann dans sa forme dependante du temps presente toujours un defi de taille pour tous types de geometries,un autre schema de calcul est necessaire. Afin de contourner cette difficulte, l'hypothese adiabatique est utilisee. Elle se concretise en un schema de calcul a quatre etapes. La premiere et deuxieme etapes demeurent les memes pour des conditions nominales du reacteur. La troisieme etape se resume a obtenir les nouvelles proprietes nucleaires de la cellule a la suite de la perturbation pour les utiliser, au niveau de la quatrieme etape, dans un nouveau calcul de reacteur et obtenir l'effet de la perturbation sur le reacteur. Ce projet vise a verifier cette hypothese. Ainsi, un nouveau schema de calcul a ete defini. La premiere etape de ce projet a ete de creer un nouveau logiciel capable de resoudre l'equation de Boltzmann dependante du temps par la methode stochastique Monte Carlo dans le but d'obtenir des sections efficaces qui evoluent dans le temps. Ce code a ete utilise pour simuler un accident LOCA dans un reacteur nucleaire de type

  6. Oxidation of ordinary steels or alloys heated in carbon dioxide under pressure; Oxydation d'aciers ordinaires ou allies chauffes dans le gaz carbonique sous pression

    Energy Technology Data Exchange (ETDEWEB)

    Leclercq, D; Chevilliard, C; Darras, R [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    Selection tests were carried out on commercial steels from the viewpoint of their resistance to oxidation in carbon dioxide, under 25 atmospheres pressure, between 350 and 600 deg. C. Comparative curve of oxidation kinetics were obtained, from which the influence of various additive elements can be found; small amounts of aluminium particularly seem to be favourable in the case of only slightly alloyed steels. (author) [French] Des essais de selection d'aciers commerciaux ont ete effectues quant a leur resistance a l'oxydation dans le gaz carbonique, sous pression de 25 atmospheres, ente 350 et 600 deg. C. Des courbes comparatives de cinetique d'oxydation ont ete obtenues, ce qui permet de degager l'influence de divers elements d'addition; de faibles teneurs en aluminium apparaissent notamment favorables dans le cas des aciers peu allies. L'acier inoxydable 18-8 a egalement ete etudie, notamment sous forme de tubes minces. Son comportement est bon jusqu'au moins 600 deg. C dans ces conditions. (auteur)

  7. The point-defect of carbon nanotubes anchoring Au nanoparticles

    DEFF Research Database (Denmark)

    Lv, Y. A.; Cui, Y. H.; Li, X. N.

    2010-01-01

    The understanding of the interaction between Au and carbon nanotubes (CNTs) is very important since Au/CNTs composites have wide applications in many fields. In this study, we investigated the dispersion of Au nanoparticles on the CNTs by transmission electron microscopy and the bonding mechanism...

  8. The analysis on of the effect of urea, iron sulfate and vermicompost fertilizers on the growth characteristics and yield of sunflower (Helianthus annuus L. The city Darreh Gaz

    Directory of Open Access Journals (Sweden)

    mahdiyeh zomorrodi

    2015-12-01

    Full Text Available To study the effect of vermicompost and urea and iron sulfate fertilizers on the growth characteristics and yield of sunflower seed (Helianthus annuus L. an pediment was conducted in Darreh Gaz located in Khorasan Razavi province in 2012. Factorial experiment in a randomized complete block design with three factors and three repetition. In this experiment three levels of urea (50; 150 and 250 kg per hectare as the first factor and two level of vermicompost (7 tons per hectare consumption and non-consumption as the second factor and two iron sulfate (80 kilogram per hectare consumption and non- consumption were considered as the third factor. The results showed that the effect of urea × vermicompost treatment combination on stem height, head diameter, stem dry weight and yield was significantly at one percent probability level. The treatment combination of 250 kg. ha-1 × iron sulfate× vermicompost increased plant height, head diameter, petiole dry weight. Vermicompost × iron sulfate treatment combination on the dry weight’s leaf, petiole, stem and head were the highest significant (p≤0.01. The application of vermicompost × iron sulfate treatment combination resulted in the highest rate of stem diameter, leaf dry weight and stem the highest yield belonged to 250 kg.ha-1 × vermicompost. Iron sulfate use different amounts of urea fertilizer redact yield. The lowest yield of 250 kg.ha-1× iron sulfate was related to treatment combination. So it seems that the combined application of organic vermicompost fertilizer and urea and iron sulfate fertilizers on the growth and yield of sunflower Darreh Gaz can be effective in improving properties.

  9. National measures fostering alternative vehicles: electric, natural gas, liquefied oil gas vehicles; Dispositions nationales en faveur des vehicules alternatifs: vehicules electriques, au gaz naturel (GNv) et au gaz de petrole liquefie (GPLc)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-02-07

    This document, issued by the French Ministry of Economy, Finances and Industry, presents national measures fostering alternative vehicles, i.e., electric, natural gas and liquefied oil gas vehicles. Financial supports for studies aiming at optimizing the fleet and choosing the alternative vehicles as well as for purchasing vehicles both by counter procedure and for demonstration programmes are provided. Amount of subsidies, conditions of obtaining and categories of addressees are indicated. The document contains also two relating studies. The first one is titled 'the policy of developing alternative vehicles'. The following four items are addressed: - the present frame favouring the alternative vehicles; - the electric vehicles; - natural gas fuelled vehicles (GNV); - liquefied oil gas fuelled vehicles (GPLc). Although non-polluting the electric vehicles are not tempting because of their rather limited range (80 Km at a battery charging). So far only around 3,000 vehicles were sold. Fifty GNV buses were ordered by RATP and the figure raised at 70 in 1998 and 1999. The GPLc fleet amounts up to 70,000 vehicles and by the end of 2000 it is foreseen to reach the level of 300,000 vehicles. The second study addresses to the issue of natural gas for vehicles. It presents: - its advantages; - its peculiarities; - the action of public authorities; -the current state and trends of GNV vehicles. In a joint effort public authorities and partners of this option are aiming at a fleet of 2500 light service vehicles and 300 bus for urban transport by the end of 1999.

  10. National arrangements in favour of the alternative vehicles: electrical , natural gas (NGV) and liquefied petroleum gases (LPG) vehicles; Dispositions nationales en faveur des vehicules alternatifs: vehicules electriques, au gaz naturel (GNv) et au gaz de petrole liquefie (GPLc)

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    2000-01-01

    The public will find in this document all the financial assistances concerning the acquisition and the maintenance of an alternative vehicle, at the date of january 2000. The vehicles concerned are: all type of electrical vehicles, NGV vehicles and LPG vehicles. (A.L.B.)

  11. Contribution to the improvement of VRLA batteries for cycling applications; Contribution a l'amelioration des batteries au plomb fermees pour l'application au vehicule electrique

    Energy Technology Data Exchange (ETDEWEB)

    Perrin, M.

    2001-07-01

    Life time and performance of lead batteries for electric-powered vehicles have been optimized by the application of a mechanical pressure on electrodes blocks with a new separator AJS. On the positive grid, the corrosion decreases as the associated effects because AJS stabilizes mechanically the block. The use of phosphoric acid increases the high discharge currant cells performance if they are loaded by an adequate regime. This effect disappears during the cycle. (A.L.B.)

  12. Synthesis, characterization of Ag-Au core-shell bimetal nanoparticles and its application for electrocatalytic oxidation/sensing of L-methionine

    Energy Technology Data Exchange (ETDEWEB)

    Murugavelu, M.; Karthikeyan, B., E-mail: bkarthi_au@yahoo.com

    2017-01-01

    The Ag-Au core-shell bimetal nanoparticles (BNPs) was prepared using chemical reduction method. The prepared Ag-Au core-shell BNPs were characterized by UV–Visible (UV–Vis) spectroscopy, field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HR-TEM), X-ray diffraction (XRD), atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS) pattern. These results showed the Ag-Au BNPs exhibited core-shell shape. The Ag-Au core-shell BNPs was examined towards electrocatalytic oxidation of L-methionine (L-Met) by cyclic voltammetry (CV), linear sweep voltammetry (LSV) and chronoamperometry. According to the results, L-Met is determined with detection limit of 30 μM. Interference studies in biological buffer was also studied. - Highlights: • The Ag-Au core-shell BNPs are synthesized and characterized • Ag-Au core-shell BNPs modified (Ag-Au/GCE) has been examined for L-methionine oxidation/sensing by using electrochemical method. • The Ag-Au/GCE exhibited good performance for the detection of L-methionine.

  13. Improvements in gas supply systems for heavy-water moderated reactors; Etudes de perfectionnements aux systemes d'alimentation en gaz d'un reacteur modere a l'eau lourde

    Energy Technology Data Exchange (ETDEWEB)

    Aubert, G; Hassig, J M; Laurent, N; Thomas, B [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    In a heavy-water moderated reactor cooled by pressurized gas, an important problem from the point of view, of the reactor block and its economics is the choice of the gas supply system. In the pressure tube solution, the whole of the reactor block structure is at a relatively low temperature, whereas the gas supply equipment is at that of the gas, which is much higher. These parts, through which passes the heat carrying fluid have to present as low a resistance as possible to it so as to avoid costly extra blowing power. Finally, they may only be placed in the reactor block after it has been built; the time required for putting them in position should therefore not be too long. The work reported here concerns the various problems arising in the case of each channel being supplied individually by a tube at the entry and the exit which is connected to a main circuit made up of large size collectors. This individual tubing is sufficiently flexible to absorb the differential expansion and the movement of its ends without stresses or prohibitive reactions being produced; the tubing is also of relatively short length so as to reduce the pressure head of the pressurized gas outside the channels; the small amount of space taken up by the tubing makes it possible to assemble it in a manner which is satisfactory from the point of view both of the time required and of the technical quality. (authors) [French] Dans un reacteur modere a l'eau lourde et refroidi au gaz sous pression, un probleme important du point de vue du trace du bloc pile et de son economie est le choix du systeme d'alimentation en gaz. Pour une solution a tubes de force, l'ensemble des structures du bloc reacteur est a temperature relativement faible, alors que les organes d'alimentation en gaz sont a celle, notablement plus elevee, du gaz. Ces organes, traverses par le debit du caloporteur, doivent lui opposer le minimum de resistance afin de ne pas necessiter un supplement onereux de puissance de

  14. Senegal country study; Evaluation des couts de reduction des emissions de gaz a effect de serre au Senegal

    Energy Technology Data Exchange (ETDEWEB)

    Sow, I

    1998-10-01

    The first part of this study consists of an analysis of the socio-economic development in Senegal and of establishment of inventory and energy balance for greenhouse gases. Scenarios for emission from single economic sectors are discussed. (EG)

  15. Future markets and technologies for natural gas vehicles; Futurs marches et technologies pour les vehicules au gaz naturel

    Energy Technology Data Exchange (ETDEWEB)

    Allen, J. [Development Engineer, Lotus Engineering (United Kingdom); Carpenter, B. [Gas Applications, BG Technology (United Kingdom)

    2000-07-01

    Lotus Engineering and BG Technology recently collaborated on the conversion of the Lotus Elise for operation on natural gas. This paper considers the world-wide opportunities for natural gas as an automotive fuel by comparison with other fuels. It looks at how technology can be used to exploit this potential, by examining the special features of the gas fuelled Elise, and how other technologies such as hybrid vehicles and fuel cells can be expected to respond to this challenge in future. (authors)

  16. The natural gas air-conditioning; La climatisation au gaz naturel. Un avenir prometteur, une technique confirmee

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    The natural gas air-conditioning market is in growth (it will cover 10% of the market in 2002).To illustrate the possibilities of this energy source, this paper presents three examples of the natural gas air-conditioning in France. The technical aspects, the cost and the advantages of such systems are discussed. (A.L.B.)

  17. Fe2O3-Au hybrid nanoparticles for sensing applications via sers analysis

    Energy Technology Data Exchange (ETDEWEB)

    Murph, Simona Hunyadi [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Searles, Emily [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2017-06-25

    Nanoparticles with large amounts of surface area and unique characteristics that are distinct from their bulk material provide an interesting application in the enhancement of inelastic scattering signal. Surface Enhanced Raman Spectroscopy (SERS) strives to increase the Raman scattering effect when chemical species of interest are in the close proximity of metallic nnaostructures. Gold nanoparticles of various shapes have been used for sensing applications via SERS as they demonstrate the greatest effect of plasmonic behavior in the visible-near IR region of the spectrum. When coupled with other nanoparticles, namely iron oxide nanoparticles, hybrid structures with increased functionality were produced. Multifunctional iron oxide-gold hybrid nanostructures have been created via solution chemistries and investigated for analyte detection of a model analyte. By exploiting their magnetic properties, nanogaps or “hot spots” were rationally created and evaluated for SERS enhancement studies.

  18. Together on the same planet. Gaz de France and sustainable development in 2006; Ensemble sur la meme planete. Gaz de France et le developpement durable en 2006

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    This document presents the sustainable development policy of Gaz de France group. It identifies the challenges the group has to face in order to control the environmental impact of the Group's activities (exploration, production, procurement, re-gasification, transmission, storage, distribution, marketing and shares, services). The approach used is based on a voluntary commitment of the Group to dialogue and share current challenges with all its stakeholders, and to imagine other roads to development. The initiatives consist in clean production practices, development of renewable energy sources, energy conservation, investment in research, safety improvement, solidarity with underprivileged people, respect of local environment and of codes of conduct, accompanying local economic development and development of clean transport systems. (J.S.)

  19. Together on the same planet. Gaz de France and sustainable development in 2006; Ensemble sur la meme planete. Gaz de France et le developpement durable en 2006

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    This document presents the sustainable development policy of Gaz de France group. It identifies the challenges the group has to face in order to control the environmental impact of the Group's activities (exploration, production, procurement, re-gasification, transmission, storage, distribution, marketing and shares, services). The approach used is based on a voluntary commitment of the Group to dialogue and share current challenges with all its stakeholders, and to imagine other roads to development. The initiatives consist in clean production practices, development of renewable energy sources, energy conservation, investment in research, safety improvement, solidarity with underprivileged people, respect of local environment and of codes of conduct, accompanying local economic development and development of clean transport systems. (J.S.)

  20. Synthesis and application of strawberry-like Fe3O4-Au nanoparticles as CT-MR dual-modality contrast agents in accurate detection of the progressive liver disease.

    Science.gov (United States)

    Zhao, Hui Y; Liu, Sen; He, Jian; Pan, Chao C; Li, Hui; Zhou, Zheng Y; Ding, Yin; Huo, Da; Hu, Yong

    2015-05-01

    Development of non-invasive assay for the accurate diagnosis of progressive liver diseases (e.g., fatty liver and hepatocellular carcinoma (HCC)) is of great clinical significance and remains to be a big challenge. Herein, we reported the synthesis of strawberry-like Fe3O4-Au hybrid nanoparticles at room temperature that simultaneously exhibited fluorescence, enhanced X-ray attenuation, and magnetic properties. The results of in vitro fluorescence assay showed that the nanoparticles had significant photo-stability and could avoid the endosome degradation in cells. The in vivo imaging of normal mice demonstrated that the Fe3O4-Au nanoparticles provided 34.61-fold contrast enhancement under magnetic resonance (MR) guidance 15 min post the administration. Computed tomography (CT) measurements showed that the highest Hounsfield Unit (HU) was 174 at 30 min post the injection of Fe3O4-Au nanoparticles. In vivo performance of the Fe3O4-Au nanoparticles was further evaluated in rat models bearing three different liver diseases. For the fatty liver model, nearly homogeneous contrast enhancement was observed under both MR (highest contrast ratio 47.33) and CT (from 19 HU to 72 HU) guidances without the occurrences of focal nodules or dysfunction. For the cirrhotic liver and HCC, pronounced enhancement under MR and CT guidance could be seen in liver parenchyma with highlighted lesions after Fe3O4-Au injection. Furthermore, pathological, hematological and biochemical analysis revealed the absence of acute and chronic toxicity, confirming the biocompatibility of our platform for in vivo applications. Collectively, These Fe3O4-Au nanoparticles showed great promise as a candidate for multi-modality bio-imaging. Copyright © 2015 Elsevier Ltd. All rights reserved.

  1. 2006 annual results: Gaz de France announces record-high results and exceeds its objectives

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    Paris, 13 March 2007 - In fiscal year 2006, Gaz de France had the best operational performance in its history. The Group confirms the strength of its business model, with sound Infrastructure business and sharp growth in Exploration - Production, Trading and Sales: - Net income, Group share: 2.3 billion euros; - EBITDA: 5.15 billion euros; - Dynamic dividend policy: 1.1 euro per share (+62%); - Investments at stepped-up pace: 4 billion euros (+38%); - Contribution of Group's international activities doubled in two years (39% of sales); - Many operational advances: strengthened operations, Exploration-Production, LNG Infrastructures and Electricity; - Major steps completed in merger project with Suez.

  2. 2006 annual results: Gaz de France announces record-high results and exceeds its objectives

    International Nuclear Information System (INIS)

    2007-01-01

    Paris, 13 March 2007 - In fiscal year 2006, Gaz de France had the best operational performance in its history. The Group confirms the strength of its business model, with sound Infrastructure business and sharp growth in Exploration - Production, Trading and Sales: - Net income, Group share: 2.3 billion euros; - EBITDA: 5.15 billion euros; - Dynamic dividend policy: 1.1 euro per share (+62%); - Investments at stepped-up pace: 4 billion euros (+38%); - Contribution of Group's international activities doubled in two years (39% of sales); - Many operational advances: strengthened operations, Exploration-Production, LNG Infrastructures and Electricity; - Major steps completed in merger project with Suez

  3. Silica diatom shells tailored with Au nanoparticles enable sensitive analysis of molecules for biological, safety and environment applications

    KAUST Repository

    Onesto, V.; Villani, M.; Coluccio, M. L.; Majewska, R.; Alabastri, A.; Battista, E.; Schirato, A.; Calestani, D.; Coppedé , N.; Cesarelli, M.; Amato, F.; Di Fabrizio, Enzo M.; Gentile, F.

    2018-01-01

    Diatom shells are a natural, theoretically unlimited material composed of silicon dioxide, with regular patterns of pores penetrating through their surface. For their characteristics, diatom shells show promise to be used as low cost, highly efficient drug carriers, sensor devices or other micro-devices. Here, we demonstrate diatom shells functionalized with gold nanoparticles for the harvesting and detection of biological analytes (bovine serum albumin—BSA) and chemical pollutants (mineral oil) in low abundance ranges, for applications in bioengineering, medicine, safety, and pollution monitoring.

  4. Silica diatom shells tailored with Au nanoparticles enable sensitive analysis of molecules for biological, safety and environment applications

    KAUST Repository

    Onesto, V.

    2018-04-19

    Diatom shells are a natural, theoretically unlimited material composed of silicon dioxide, with regular patterns of pores penetrating through their surface. For their characteristics, diatom shells show promise to be used as low cost, highly efficient drug carriers, sensor devices or other micro-devices. Here, we demonstrate diatom shells functionalized with gold nanoparticles for the harvesting and detection of biological analytes (bovine serum albumin—BSA) and chemical pollutants (mineral oil) in low abundance ranges, for applications in bioengineering, medicine, safety, and pollution monitoring.

  5. Tantalum electrodes modified with well-aligned carbon nanotube-Au nanoparticles: application to the highly sensitive electrochemical determination of cefazolin.

    Science.gov (United States)

    Fayazfar, Haniyeh; Afshar, Abdollah; Dolati, Abolghasem

    2014-07-01

    Carbon nanotube/nanoparticle hybrid materials have been proven to exhibit high electrocatalytic activity suggesting broad potential applications in the field of electroanalysis. For the first time, modification of Ta electrode with aligned multi-walled carbon nanotubes/Au nanoparticles introduced for the sensitive determination of the antibiotic drug, cefazolin (CFZ). The electrochemical response characteristics of the modified electrode toward CFZ were investigated by means of cyclic and linear sweep voltammetry. The modified electrode showed an efficient catalytic activity for the reduction of CFZ, leading to a remarkable decrease in reduction overpotential and a significant increase of peak current. Under optimum conditions, the highly sensitive modified electrode showed a wide linear range from 50 pM to 50 μM with a sufficiently low detection limit of 1 ± 0.01 pM (S/N = 3). The results indicated that the prepared electrode presents suitable characteristics in terms of sensitivity (458.2 ± 2.6 μAcm(-2)/μM), accuracy, repeatability (RSD of 1.8 %), reproducibility (RSD of 2.9 %), stability (14 days), and good catalytic activity in physiological conditions. The method was successfully applied for accurate determination of trace amounts of CFZ in pharmaceutical and clinical preparations without the necessity for samples pretreatment or any time-consuming extraction or evaporation steps prior to the analysis.

  6. Model-Based Throttle Control using Static Compensators and Pole Placement Commande des gaz basée sur un modèle utilisant des compensateurs statiques et un placement de pôles

    Directory of Open Access Journals (Sweden)

    Thomasson A.

    2011-10-01

    Full Text Available In modern spark ignited engines, the throttle is controlled by the Electronic Control Unit (ECU, which gives the ECU direct control of the air flow and thereby the engine torque. This puts high demands on the speed and accuracy of the controller that positions the throttle plate. The throttle control problem is complicated by two strong nonlinear effects, friction and limp-home torque. This paper proposes the use of two, simultaneously active, static compensators to counter these effects and approximately linearize the system. A PID controller is designed for the linearized system, where pole placement is applied to design the PD controller and a gain scheduled I-part is added for robustness against model errors. A systematic procedure for generating compensator and controller parameters from open loop experiments is also developed. The controller performance is evaluated both in simulation, on a throttle control benchmark problem, and experimentally. A robustness investigation pointed out that the limp-home position is an important parameter for the controller performance, this is emphasized by the deviations found in experiments. The proposed method for parameter identification achieves the desired accuracy. Au sein des moteurs à allumage commandé modernes, les gaz sont régulés par le boîtier de commande électronique (ECU; Electronic Control Unit, qui permet la régulation directe par l’ECU du flux d’air et ainsi du couple moteur. Cela conduit à des exigences élevées quant à la vitesse et à la précision du régulateur qui positionne le papillon des gaz. Le problème de commande des gaz est compliqué par deux forts effets non linéaires, le frottement et le couple de mode de secours (“limp-home”. Cet article propose l’utilisation de deux compensateurs statiques, actifs simultanément, pour contrer ces effets et linéariser approximativement le système. Un régulateur PID est conçu pour le système linéarisé, où un

  7. Ultra-relativistic Au+Au and d+Au collisions:

    Science.gov (United States)

    Back, B. B.; Baker, M. D.; Ballintijn, M.; Barton, D. S.; Betts, R. R.; Bickley, A. A.; Bindel, R.; Budzanowski, A.; Busza, W.; Carroll, A.; Chai, Z.; Decowski, M. P.; García, E.; Gburek, T.; George, N.; Gulbrandsen, K.; Gushue, S.; Halliwell, C.; Hamblen, J.; Hauer, M.; Heintzelman, G. A.; Henderson, C.; Hofman, D. J.; Hollis, R. S.; Hołyński, R.; Holzman, B.; Iordanova, A.; Johnson, E.; Kane, J. L.; Katzy, J.; Khan, N.; Kucewicz, W.; Kulinich, P.; Kuo, C. M.; Lin, W. T.; Manly, S.; McLeod, D.; Mignerey, A. C.; Nouicer, R.; Olszewski, A.; Pak, R.; Park, I. C.; Pernegger, H.; Reed, C.; Remsberg, L. P.; Reuter, M.; Roland, C.; Roland, G.; Rosenberg, L.; Sagerer, J.; Sarin, P.; Sawicki, P.; Seals, H.; Sedykh, I.; Skulski, W.; Smith, C. E.; Stankiewicz, M. A.; Steinberg, P.; Stephans, G. S. F.; Sukhanov, A.; Tang, J.-L.; Tonjes, M. B.; Trzupek, A.; Vale, C.; van Nieuwenhuizen, G. J.; Vaurynovich, S. S.; Verdier, R.; Veres, G. I.; Wenger, E.; Wolfs, F. L. H.; Wosiek, B.; Woźniak, K.; Wuosmaa, A. H.; Wysłouch, B.

    In this talk I will review PHOBOS data on charged particle multiplicities, obtained in Au+Au and d+Au collisions at RHIC. The general features of the Au+Au pseudorapidity distributions results will be discussed and compared to those of /line{p}p collisions. The total charged particle multiplicity, scaled by the number of participant pairs, is observed to be about 40% higher in Au+Au collisions than in /line{p}p and d+Au systems, but, surprisingly at the same level of e+e- collisions. Limiting fragmentation scaling is seen to be obeyed in Au+Au collisions.

  8. Multi-dimensional modeling of gas-liquid two-phase flows. Application to the simulation of ascending bubble flows in vertical ducts; Modelisation multidimensionnelle des ecoulements diphasiques gaz-liquide. Application a la simulation des ecoulements a bulles ascendants en conduite verticale

    Energy Technology Data Exchange (ETDEWEB)

    Morel, Ch

    1997-10-31

    The aim of this thesis is the 3-D modeling and numerical simulation of liquid/gas (water/vapor or water/air) two-phase flows in cooling circuits of nuclear power plants during normal and accidental situations. The development of a multidimensional dual-fluid model encounters two problems: the statistical effects of turbulence and the interface mass, momentum and energy transfers. The models developed in this study were introduced in the 3-D module of the CATHARE code developed by the CEA and the results were compared to experimental results available in the literature. The first chapter describes the equations of the local dual-fluid model for the 3-D description of two-phase flows. Closing relations adapted to dispersed flows with isothermal bubbles and without phase transformation are proposed and focus on the momentum transfer at the interfaces. The theoretical study of turbulence in the liquid phase of a bubble flow is modelled in chapter 2. Chapter 3 deals with the voluminal interface area used in the interface mass, momentum and energy transfers, and chapters 4 and 5 concern the application of the developed models to concrete situations. Chapter 4 describes in details the 3-D module of the CATHARE code while chapter 5 gives a comparison of numerical results obtained using the CATHARE code with other experimental results obtained at EdF. (J.S.) 109 refs.

  9. Application of multivariable analysis methods to the quantitative detection of gas by tin dioxide micro-sensors; Application des methodes d'analyse multivariables a la detection quantitative de gaz par microcapteurs a base de dioxyde d'etain

    Energy Technology Data Exchange (ETDEWEB)

    Perdreau, N.

    2000-01-17

    The electric conductivity of tin dioxide depends on the temperature of the material and on the nature and environment of the surrounding gas. This work shows that the treatment by multivariable analysis methods of electric conductance signals of one sensor allows to determine concentrations of binary or ternary mixtures of ethanol (0-80 ppm), carbon monoxide (0-300 ppm) and methane (0-1000 ppm). A part of this study has consisted of the design and the implementation of an automatic testing bench allowing to acquire the electric conductance of four sensors in thermal cycle and under gaseous cycles. It has also revealed some disturbing effects (humidity,..) of the measurement. Two techniques of sensor fabrication have been used to obtain conductances (depending of temperature) distinct for each gas, reproducible for the different sensors and enough stable with time to allow the exploitation of the signals by multivariable analysis methods (tin dioxide under the form of thin layers obtained by reactive evaporation or under the form of sintered powder bars). In a last part, it has been shown that the quantitative determination of gas by the application of chemo-metry methods is possible although the relation between the electric conductances in one part and the temperatures and concentrations in another part is non linear. Moreover, the modelling with the 'Partial Least Square' method and a pretreatment allows to obtain performance data comparable to those obtained with neural networks. (O.M.)

  10. Ionic liquid assisted synthesis of nano Pd-Au particles and application for the detection of epinephrine, dopamine and uric acid

    Energy Technology Data Exchange (ETDEWEB)

    Tsai, Tsung-Hsuan; Thiagarajan, Soundappan; Chen Shenming, E-mail: smchen78@ms15.hinet.net; Cheng Chingyi

    2012-01-31

    Nano Pd-Au particles have been electrochemically fabricated utilizing ionic liquid as green electrolyte (1-Butyl-3-methylimidazolium tetrafluoroborate). Nano Pd-Au particles modified glassy carbon electrode (GCE) and indium tin oxide coated glass electrodes were examined using atomic force microscopy, field emission scanning electron microscope and X-ray diffraction studies. Electrodeposited nano Pd-Au particles' average diameter was found as 33 nm. Nano Pd-Au particle modified GCE was electrochemically active and stable in various pH solutions. The proposed nano particle modified GCE reduces the over potential and shows the well defined oxidation peaks for the detection of epinephrine and simultaneous determination of dopamine and uric acid (in pH 7.0 phosphate buffer solution) using cyclic voltammetry and differential pulse voltammetry.

  11. Contribution to the study of the ionization and heating of gases by laser radiation; Contribution a l'etude de l'ionisation et du chauffage des gaz par le rayonnement d'un laser declenche

    Energy Technology Data Exchange (ETDEWEB)

    Veyrie, P [Commissariat a l' Energie Atomique, Limeil-Brevannes (France). Centre d' Etudes

    1968-01-01

    The ionization and heating of gases by the concentrated radiation of a neodymium laser is studied. The power is 300 MW, the gas studied is primarily deuterium between 300 mm and 2280 mm. The first part concerns a certain number of experimental results on the absorption of the radiation and on changes produced in the plasma as a function of time. From these results are deduced a certain number of consequences, amongst which may be mentioned the definition of a pre-ionization threshold. These experimental results are interpreted in the second part. A calculation is made of the length of the period during which the electrons multiply up to when the absorption becomes measurable. The last phase corresponds to the hydrodynamics evolution, the calculations are compared with the experiments. The agreement between theory and experiment is satisfactory for the different phases. (author) [French] On etudie l'ionisation et le chauffage des gaz par le rayonnement concentre d'un laser au neodyme. La puissance est de 300 MW, le gaz etudie est principalement le deuterium entre 300 mm et 2280 mm. La premiere partie concerne un certain nombre de resultats experimentaux. Il s'agit de l'absorption du rayonnement et de l'evolution chronologique du plasma. De ces resultats on deduit un certain nombre de consequences parmi lesquelles il faut citer la definition d'un seuil de preionisation. Ces resultats experimentaux sont interpretes dans la deuxieme partie. On calcule la duree de la phase pendant laquelle se multiplient les electrons jusqu'a ce que l'absorption soit mesurable. La derniere phase correspond a l'evolution hydrodynamique. Les calculs sont confrontes avec l'experience. L'accord entre theorie et experience est satisfaisant pour les differentes phases. (auteur)

  12. Contribution to the study of the desorption of fission gases formed in irradiated uranium oxide; Contribution a l'etude de la desorption des gaz de fission formes dans l'oxyde d'uranium irradie

    Energy Technology Data Exchange (ETDEWEB)

    Berry, J -L; Darras, R; Roger, B [Commissariat a l' Energie Atomique, Centre d' Etudes Nucleaires de Saclay, 91 - Gif-sur-Yvette (France)

    1966-09-01

    The release of {sup 133}Xe from irradiated UO{sub 2} has been studied in the temperature range 1300 to 1900 deg C, using various monocrystalline or sintered samples. Up to 1600 deg C, this release is proportional to the square root of the time and thus occurs essentially by diffusion. The apparent diffusion constant D' decreases and the activation energy of the corresponding process increases as the integrated neutron flux received by the fuel increases. As the density of the sintered samples decreases however, the activation energy of the release also decreases, so that the difference between D' values for sintered samples of different densities decreases as the temperature rises. Finally, above 1600 deg C, the fission gas release phenomenon is governed by UO{sub 2} evaporation, and all the different types of oxide studied have similar behaviors, characterized by poor retention of these gases. (authors) [French] La desorption du xenon 133 forme dans le bioxyde d'uranium irradie a ete etudiee dans l'intervalle de 1300 a 1900 C, a l'aide de differents echantillons monocristallins ou frittes. Jusqu'a 1600 C, elle s'effectue proportionnellement a la racine carree du temps, donc essentiellement par diffusion. La pseudo-constante de desorption D' decroit et l'energie d'activation du processus correspondant croit lorsque le flux de neutrons integre recu par le combustible augmente. Cependant, lorsque la densite des frittes diminue, l'energie d'activation de desorption diminue egalement, de sorte que l'ecart entre les valeurs de D' relatives a des frittes de densites differentes se restreint lorsque, la temperature s'eleve. Finalement, au-dessus de 1600 C, l'evaporation de l'UO{sub 2} regit le phenomene de liberation des gaz de fission, et toutes les qualites d'oxyde etudiees presentent alors des comportements voisins a cet egard, caracterises par une mediocre retention de ces gaz. (auteurs)

  13. Contribution to the study of the ionization and heating of gases by laser radiation; Contribution a l'etude de l'ionisation et du chauffage des gaz par le rayonnement d'un laser declenche

    Energy Technology Data Exchange (ETDEWEB)

    Veyrie, P. [Commissariat a l' Energie Atomique, Limeil-Brevannes (France). Centre d' Etudes

    1968-01-01

    The ionization and heating of gases by the concentrated radiation of a neodymium laser is studied. The power is 300 MW, the gas studied is primarily deuterium between 300 mm and 2280 mm. The first part concerns a certain number of experimental results on the absorption of the radiation and on changes produced in the plasma as a function of time. From these results are deduced a certain number of consequences, amongst which may be mentioned the definition of a pre-ionization threshold. These experimental results are interpreted in the second part. A calculation is made of the length of the period during which the electrons multiply up to when the absorption becomes measurable. The last phase corresponds to the hydrodynamics evolution, the calculations are compared with the experiments. The agreement between theory and experiment is satisfactory for the different phases. (author) [French] On etudie l'ionisation et le chauffage des gaz par le rayonnement concentre d'un laser au neodyme. La puissance est de 300 MW, le gaz etudie est principalement le deuterium entre 300 mm et 2280 mm. La premiere partie concerne un certain nombre de resultats experimentaux. Il s'agit de l'absorption du rayonnement et de l'evolution chronologique du plasma. De ces resultats on deduit un certain nombre de consequences parmi lesquelles il faut citer la definition d'un seuil de preionisation. Ces resultats experimentaux sont interpretes dans la deuxieme partie. On calcule la duree de la phase pendant laquelle se multiplient les electrons jusqu'a ce que l'absorption soit mesurable. La derniere phase correspond a l'evolution hydrodynamique. Les calculs sont confrontes avec l'experience. L'accord entre theorie et experience est satisfaisant pour les differentes phases. (auteur)

  14. Synthesis of double-shelled sea urchin-like yolk-shell Fe3O4/TiO2/Au microspheres and their catalytic applications

    International Nuclear Information System (INIS)

    Li, Jie; Tan, Li; Wang, Ge; Yang, Mu

    2015-01-01

    Double-shelled sea urchin-like yolk-shell Fe 3 O 4 /TiO 2 /Au microspheres were successfully synthesized through loading Au nanoparticles on the Fe 3 O 4 /TiO 2 support by a in situ reduction of HAuCl 4 with NaBH 4 aqueous solution. These microspheres possess tunable cavity size, adjustable shell layers, high structural stability and large specific surface area. The Au nanoparticles of approximately 5 nm in diameter were loaded both on the TiO 2 nanofibers and inside the cavities of sea urchin-like yolk-shell Fe 3 O 4 /TiO 2 microspheres. The sea urchin-like structure composed of TiO 2 nanofibers ensure the good distribution of the Au nanoparticles, while the novel double-shelled yolk-shell structure guarantees the high stability of the Au nanoparticles. Furthermore, the Fe 3 O 4 magnetic core facilitates the convenient recovery of the catalyst by applying an external magnetic field. The Fe 3 O 4 /TiO 2 /Au microspheres display excellent activities and recycling properties in the catalytic reduction of 4-nitrophenol (4-NP): the rate constant is 1.84 min −1 and turnover frequency is 5457 h −1 . (paper)

  15. A study on the effect of low energy ion beam irradiation on Au/TiO_2 system for its application in photoelectrochemical splitting of water

    International Nuclear Information System (INIS)

    Verma, Anuradha; Srivastav, Anupam; Sharma, Dipika; Banerjee, Anamika; Sharma, Shailja; Satsangi, Vibha Rani; Shrivastav, Rohit; Avasthi, Devesh Kumar; Dass, Sahab

    2016-01-01

    Nanostructured TiO_2 thin films were deposited on indium tin oxide (ITO) substrate via sol–gel technique and were modified by plasmonic Au layer. The plasmonic Au modified TiO_2 (Au/TiO_2) thin films were then irradiated with 500 keV Ar"2"+ ion beam at different ion fluences viz. 1 × 10"1"6, 3 × 10"1"6 and 1 × 10"1"7 to study the effect of nuclear energy deposition on the morphology, crystallinity, band gap, surface plasmon resonance (SPR) peak exhibited by Au particles and photoelectrochemical properties of the system. Prepared thin films were characterized by X-ray diffractometry (XRD), scanning electron microscopy (SEM), Rutherford backscattering spectrometry (RBS) measurements and UV–visible spectroscopy. The photoelectrochemical measurements revealed that both Au/TiO_2 and Au/TiO_2 thin film irradiated at 1 × 10"1"6 fluence exhibits enhanced photoelectrochemical response in comparison to pristine TiO_2. The film irradiated at 1 × 10"1"6 fluence offered maximum applied bias photon-to-current efficiency (ABPE) and shows 6 times increment in photocurrent density which was attributed to more negative flat band potential, maximum decrease in band gap, high open circuit voltage (V_o_c) and reduced charge transfer resistance.

  16. Annual report on theoretical work of the S.T.G.I. (Section de theorie des gaz ionises)

    International Nuclear Information System (INIS)

    1984-01-01

    This report presents in a detailed form the theoretical work of the STGI (Section Theorie des Gaz Ionises). It is thus hoped that the present report will be useful for physicists interested in additional information. Works an plasma equilibrium and its evolution are shortly presented together with works on plasma heating and current drive. Kinetic theory and spectroscopy are not forgotten

  17. Latest information about development of gas-fueled steam convection ovens; Ou en est la mise au point du four a gaz a convection de vapeur au Japon

    Energy Technology Data Exchange (ETDEWEB)

    Murakami, T. [Tokyo-gas co., Ltd. (Japan)

    2000-07-01

    In Japan, gas has been the main source of heat for heating-type culinary equipment in the food service industry, however, this situation has been recently changing. One reason for this is the introduction of electric steam convection ovens. To promote the use of gas steam convection ovens that can compete with electric appliances, Tokyo Gas has conducted the following development projects. Firstly, we set development targets for gas appliances to out-perform the best electric appliances, and were able to develop appliance products that met the targets. Secondly, in order to develop new markets for gas appliances, we worked on the development of compact appliances with a comparatively low initial cost, launching the world's smallest product in this category in October 1998. Thirdly, in order to make gas appliances as widely used here as they are in Europe and America, we developed appliances with costs cut by 30%, and in October 1999 we launched the cheapest gas steam convection oven in the domestic market. We plan to continue providing technological expertise to domestic manufacturers, enhancing our line-up with top performance gas appliances at even lower cost. (author)

  18. Replacing Sugar by Date Syrup in Gaz and Investigation of Texture Properties

    Directory of Open Access Journals (Sweden)

    Fateme Raiesi Ardali

    2013-10-01

    Full Text Available Date Syrup is a natural sweetener that is suitable replacement for sugar in food stuffs formulation. In this Research Amounts of 25-100 percent of sugar in Gaz formulation were replaced with date syrup and to study effect of its use in product formulation, characteristics of texture, color and sensory analyse of treatments were investigated. Statistical analyse of data was also done by SPSS software and Dankan test. The results of this research showed that amount of used date syrup in formulation had a significant effect on  color parameters  (L*,a*,b*, texture characteristics and sensory analyse of samples. By increase of date syrup in Gaz formulation, samples texture became softer than control sample and yellowness and redness index of samples were increasedDoi: DOI: 10.12777/ijse.6.1.11-15 [How to cite this article:  Shafiei, Z., Hojjatoleslami, M.,  Soha, S., and Shariati, M.A. 2014. The Influence of Malt Extraction Adding to UF Fresh Low Fat Cheese on Its Textural Properties. International Journal of Science and Engineering, 6(1:57-60. Doi: 10.12777/ijse.6.1.11-15

  19. The take-over of Gaz Metropolitain by Hydro-Quebec

    International Nuclear Information System (INIS)

    Bernard, J-T.

    1997-01-01

    The implications of a take-over of Gaz Metropolitain by Hydro-Quebec in early 1997 and the pricing of electricity and natural gas in Quebec were discussed. In January 1997, Hydro-Quebec purchased all the shares in Noverco that were formerly owned by SOQUIP. With this purchase, Hydro-Quebec became the major share holder in Noverco, the company that controls Gaz Metropolitain. This type of take-over, where an electrical utility purchases the interests in a natural gas distributor, has also been observed in the United States and is believed to be a consequence of the recent deregulation of the electricity market. In the near future, it is believed that consumers will probably pay for equivalent energy use (like heating or cooling) rather than separate tariffs for electricity or natural gas consumption. The recent popularity of gas-fueled electrical cogenerating stations is also believed to be an important factor in this take-over. 1 ref., 3 tabs

  20. Les perspectives du gaz naturel dans le Monde World Natural Gas Prospects

    Directory of Open Access Journals (Sweden)

    Valais M.

    2006-11-01

    Full Text Available Dans un monde en quête de diversification énergétique, le gaz naturel apparaît comme une source d'énergie particulièrement attrayante. Par son abondance, sa facilité de substitution aux produits pétroliers dans une gamme très large d'usages, il pourrait assurément jouer un rôle beaucoup plus important dans la couverture des besoins énergétiques mondiaux. Toutefois, de nombreux obstacles semblent devoir ralentir sa progression. Cet article dégage les grands paramètres techniques et économiques qui devraient conditionner le développement de l'industrie du gaz dans le monde et présente des perspectives d'évolution de sa production et de son commerce international d'ici à la fin du siècle. For a world in search of energy diversification, natural gas is a particularly attractive source. Its abundance and its facility for being substituted for petroleum products over a wide range of uses should certainly mean that it will play a much more important rote in filling world energy needs. Nonetheless, many obstacles are hindering its progress. This article outlines the leading technical and economic parameters which should influence the development of the world gas industry, and the prospects for its production and international trade evolution between now and the end of the century.

  1. Energy Equation Derivation of the Oil-Gas Flow in Pipelines Dérivation de l’équation d’énergie de l’écoulement huile-gaz dans des pipelines

    Directory of Open Access Journals (Sweden)

    Duan J.M

    2012-09-01

    well describe the oil-gas two-phase flow. Lors de la simulation d’un écoulement multiphasique huile-gaz dans une conduite, le calcul thermodynamique représente un processus important en interaction avec le calcul hydraulique; il influence la convergence du programme et la précision des résultats. La forme de l’équation d’énergie constitue la clef du calcul thermodynamique. Basée sur l’équation d’énergie de l’écoulement huile-gaz dans un pipeline, la formule de chute de température explicite (ETDF; Explicit Temperature Drop Formula est dérivée pour un calcul de température d’état stable huile-gaz. Cette nouvelle équation d’énergie prend en compte de nombreux facteurs, tels que l’effet Joule-Thomson, le travail de pression, le travail de frottement, ainsi que l’incidence des ondulations de terrain et le transfert de chaleur avec le milieu extérieur le long de la ligne. Ainsi, il s’agit d’une forme globale de l’équation d’énergie, laquelle pourrait décrire précisément la réalité d’un pipeline à phases multiples. Pour cette raison, un certain nombre de points de vue de la littérature à propos du calcul de température d’un écoulement diphasique huile-gaz dans des pipelines sont passés en revue. L’élimination de la boucle d’itération de température et l’intégration de l’équation de température explicite, au lieu de l’équation d’énergie d’enthalpie, dans le calcul conjugué hydraulique et thermique, se sont avérées améliorer l’efficacité de l’algorithme. Le calcul a été appliqué non seulement au modèle de composants mais aussi au modèle Black-Oil. Ce modèle est incorporé respectivement dans le modèle de composants ainsi que le modèle Black-Oil et deux simulations sont effectuées sur deux pipelines en service, les pipelines multiphasiques Yingmai-Yaha et Lufeng; les résultats de température sont comparés à la simulation calculée par OLGA et aux résultats mesurés. Il

  2. Au/ZnO nanoarchitectures with Au as both supporter and antenna of visible-light

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Tianyu; Chen, Wei; Hua, Yuxiang; Liu, Xiaoheng, E-mail: xhliu@mail.njust.edu.cn

    2017-01-15

    Highlights: • An inversed Au/ZnO nanostructure was fabricated with ZnO loaded onto Au. • The Au/ZnO nanocomposites showed enhanced properties in visible-light photocatalysis. • The SPR effect of Au was considered important for visible-light photocatalysis. - Abstract: In this paper, we fabricate Au/ZnO nanostructure with smaller ZnO nanoparticles loaded onto bigger gold nanoparticles via combining seed-mediated method and sol-gel method. The obtained Au/ZnO nanocomposites exhibit excellent properties in photocatalysis process like methyl orange (MO) degradation and oxidative conversion of methanol into formaldehyde under visible light irradiation. The enhanced properties were ascribed to the surface plasmon resonance (SPR) effect of Au nanoparticles, which could contribute to the separation of photo-excited electrons and holes and facilitate the process of absorbing visible light. This paper contributes to the emergence of multi-functional nanocomposites with possible applications in visible-light driven photocatalysts and makes the Au/ZnO photocatalyst an exceptional choice for practical applications such as environmental purification of organic pollutants in aqueous solution and the synthesis of fine chemicals and intermediates.

  3. Au/ZnO nanoarchitectures with Au as both supporter and antenna of visible-light

    International Nuclear Information System (INIS)

    Liu, Tianyu; Chen, Wei; Hua, Yuxiang; Liu, Xiaoheng

    2017-01-01

    Highlights: • An inversed Au/ZnO nanostructure was fabricated with ZnO loaded onto Au. • The Au/ZnO nanocomposites showed enhanced properties in visible-light photocatalysis. • The SPR effect of Au was considered important for visible-light photocatalysis. - Abstract: In this paper, we fabricate Au/ZnO nanostructure with smaller ZnO nanoparticles loaded onto bigger gold nanoparticles via combining seed-mediated method and sol-gel method. The obtained Au/ZnO nanocomposites exhibit excellent properties in photocatalysis process like methyl orange (MO) degradation and oxidative conversion of methanol into formaldehyde under visible light irradiation. The enhanced properties were ascribed to the surface plasmon resonance (SPR) effect of Au nanoparticles, which could contribute to the separation of photo-excited electrons and holes and facilitate the process of absorbing visible light. This paper contributes to the emergence of multi-functional nanocomposites with possible applications in visible-light driven photocatalysts and makes the Au/ZnO photocatalyst an exceptional choice for practical applications such as environmental purification of organic pollutants in aqueous solution and the synthesis of fine chemicals and intermediates.

  4. Structural, electronic and magnetic properties of Au-based monolayer derivatives in honeycomb structure

    Energy Technology Data Exchange (ETDEWEB)

    Kapoor, Pooja, E-mail: pupooja16@gmail.com; Sharma, Munish; Ahluwalia, P. K. [Physics Department, Himachal Pradesh University, Shimla, Himachal Pradesh, India 171005 (India); Kumar, Ashok [Centre for Physical Sciences, School of Basic and Applied Sciences, Central University of Punjab, Bathinda, India, 151001 (India)

    2016-05-23

    We present electronic properties of atomic layer of Au, Au{sub 2}-N, Au{sub 2}-O and Au{sub 2}-F in graphene-like structure within the framework of density functional theory (DFT). The lattice constant of derived monolayers are found to be higher than the pristine Au monolayer. Au monolayer is metallic in nature with quantum ballistic conductance calculated as 4G{sub 0}. Similarly, Au{sub 2}-N and Au{sub 2}-F monolayers show 4G{sub 0} and 2G{sub 0} quantum conductance respectively while semiconducting nature with calculated band gap of 0.28 eV has been observed for Au{sub 2}-O monolayer. Most interestingly, half metalicity has been predicted for Au{sub 2}-N and Au{sub 2}-F monolayers. Our findings may have importance for the application of these monolayers in nanoelectronic and spintronics.

  5. Mise au point

    African Journals Online (AJOL)

    31 mai 2013 ... traités au service de chirurgie maxillo-faciale et chirurgie plastique de l'hôpital ... qui est la fracture simple isolée du corps, on a inclut ce type de fracture ... sion latérale au niveau de la queue du sourcil. La voie vestibulaire ...

  6. The performance of the natural gas solutions in the accommodation; La performance des solutions gaz naturel dans l'habitat

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    This paper presents the Gaz De France Group policy concerning the utilization of the gas as energy source in residential buildings for heating and cooking. The market and more specially the manufacturers importance are discussed. (A.L.B.)

  7. Au pair trajectories

    DEFF Research Database (Denmark)

    Dalgas, Karina Märcher

    2015-01-01

    pair-sending families in the Philippines, this dissertation examines the long-term trajectories of these young Filipinas. It shows how the au pairs’ local and transnational family relations develop over time and greatly influence their life trajectories. A focal point of the study is how au pairs...... that Filipina au pairs see their stay abroad as an avenue of personal development and social recognition, I examine how the au pairs re-position themselves within their families at home through migration, and how they navigate between the often conflicting expectations of participation in the sociality......Since 2000, thousands of young Filipino migrants have come to Denmark as au pairs. Officially, they are there to “broaden their cultural horizons” by living temporarily with a Danish host family, but they also conduct domestic labor in exchange for food and money, which allows them to send...

  8. Detection of {alpha} particles using semiconductors. Application to the control of plutonium extraction; Detection des particules {alpha} par semiconducteurs application au controle de l'extraction du plutonium

    Energy Technology Data Exchange (ETDEWEB)

    Tanguy, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-03-01

    A study is made of a particles produced by thick sources, using either diffused junction or surface barrier semiconductor detectors for controlling continuously the plutonium extraction process. For this, a presenting apparatus is described in which the solutions to be analyzed flow in contact with the detector protected by a thin mica membrane. A method is described which gives a precise recording of the spectra and which thus allows the separation of two or more {alpha} emitters present in the same solution. This method has been applied to the measurement of {sup 239}Pu in the the presence of {sup 241}Am with an accuracy of {+-}5 per cent. In the second part of the report is considered the detection of plutonium in solutions of {beta} - {gamma} emitting fission products. Pile-up is reduced by using a fast amplification chain associated to totally depleted thin detectors. Under these conditions a few mg of {sup 239}Pu can be detected in solutions of fission products having an activity of 100 curies/liter. A method is given for discriminating {alpha} and {beta} particles, it is based on the difference in the collection times for the charges liberated by these particles in the detector. (author) [French] On etudie la detection de particules {alpha} issues de sources epaisses par detecteurs semiconducteurs a jonction diffusee ou a barriere de surface pour le controle continu du procede d'extraction du plutonium. A cet effet on decrit un appareil presentateur dans lequel les solutions a analyser circulent au contact du detecteur protege par une membrane mince de mica. On decrit une methode qui permet par le trace precis des spectres de separer deux ou plusieurs emetteurs {alpha} presents dans une meme solution. Cette methode a ete appliquee a la mesure du {sup 239}Pu en presence de {sup 241}Am avec une precision de {+-} 5 pour cent. Dans la deuxieme partie on traite de la detection du plutonium dans des solutions de produits de fission emetteurs {beta} and {gamma}. On

  9. Shocks in magneto-reactive-gas dynamics with application to the piston problem; Sur les chocs dans un milieu magnetodynamique reactif avec application au probleme du piston

    Energy Technology Data Exchange (ETDEWEB)

    Soubbaramayer, [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1967-03-01

    electrique et thermique). Enfin on discute de toutes les solutions possibles du probleme du piston dans un cas simple. Les methodes developpees ici peuvent etre etendues au choc ionisant. (auteur)

  10. Application of a parallel genetic algorithm to the global optimization of medium-sized Au-Pd sub-nanometre clusters

    Science.gov (United States)

    Hussein, Heider A.; Demiroglu, Ilker; Johnston, Roy L.

    2018-02-01

    To contribute to the discussion of the high activity and reactivity of Au-Pd system, we have adopted the BPGA-DFT approach to study the structural and energetic properties of medium-sized Au-Pd sub-nanometre clusters with 11-18 atoms. We have examined the structural behaviour and stability as a function of cluster size and composition. The study suggests 2D-3D crossover points for pure Au clusters at 14 and 16 atoms, whereas pure Pd clusters are all found to be 3D. For Au-Pd nanoalloys, the role of cluster size and the influence of doping were found to be extensive and non-monotonic in altering cluster structures. Various stability criteria (e.g. binding energies, second differences in energy, and mixing energies) are used to evaluate the energetics, structures, and tendency of segregation in sub-nanometre Au-Pd clusters. HOMO-LUMO gaps were calculated to give additional information on cluster stability and a systematic homotop search was used to evaluate the energies of the generated global minima of mono-substituted clusters and the preferred doping sites, as well as confirming the validity of the BPGA-DFT approach.

  11. Les recherches menées par le Gaz de France dans le domaine de l'hydrogène Research on Hydrogen by Gaz de France

    Directory of Open Access Journals (Sweden)

    Donat G.

    2006-11-01

    Full Text Available Les besoins en énergie de l'humanité allant croissant et les ressources en combustibles de la Terre étant obligatoirement limitées, le temps viendra où la demande en hydrocarbures excédera la capacité mondiale de production; cette situation s'aggravera encore ultérieurement du fait de l'épuisement des réserves récupérables. Un recours massif aux énergies nucléaire et solaire semble donc indispensable et l'utilisation de l'hydrogène comme vecteur de ces énergies retient depuis quelques années l'attention, notamment en France où les ressources propres en pétrole sont faibles. Le Gaz de France a entrepris des recherches sur la production massive de l'hydrogène par décomposition de l'eau et vient de parvenir à des conclusions pessimistes quant à la compétitivité, par rapport à la voie électrolytique, de la filière utilisant des cycles thermochimiques. Par contre, l'électrolyse de l'eau offre des perspectives intéressantes à condition d'améliorer ses performances et son économie. D'autre part, des études concernant le stockage et le transport de l'hydrogène ont permis d'ores et déjà de tirer quelques conclusions dans ces domaines où les vecteurs gazeux disposent d'excellents atouts. With the increasing energy needs of mankind and the earth's necessarily limited resources of fuel, the time will come when the demand for hydrocarbons will exceed the world production capacity. This situation will subsequently get even worse becouse of the depletion of recoverable reserves. Massive recourse ta nuclear and solar energy thus appears indispensable, and the use of hydrogen as a vector for such energies has been under consideration for several years, especially in France where petroleum resources are very limited. Gaz de France has been doing research on the mass production of hydrogen by the decomposition of water and has just come ta rather pessimistic conclusions as ta the competitiveness of thermochemical processes in

  12. Contribution to the study and to the development of continuous infrared absorption analyzers; Contribution a l'etude et a la mise au point des analyseurs en continu par absorption infrarouge

    Energy Technology Data Exchange (ETDEWEB)

    Coste, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1967-12-01

    The continuous infra-red absorption determination of corrosive gases implies the construction of an original single-beam spectrometer. The use of a vibration-rotation line means that the apparatus function has to undergo an alternating displacement: for one position this function is centered on the line, for other position it is placed close by, but away from any absorption. A non-linear relationship is derived between the concentration of the impurity under consideration, the optical density measured at the centre of the line and the total pressure of the gas mixture. The problem is then solved using an associated specific analog computer. The system is applicable to the determination of low concentrations. The principle proposed in then adapted to an analysis using a non-resolved vibration-rotation band. (authors) [French] Le dosage en continu par absorption infrarouge des gaz corrosifs, implique la construction d'un spectrometre original en simple faisceau. L'utilisation d'une raie de vibration - rotation, conduit a effectuer un deplacement alternatif de la fonction d'appareil: pour une position, celle-ci est centree sur la raie, pour l'autre position elle est placee a proximite mais en dehors de toute absorption. On etablit une relation non lineaire entre la concentration de l'impurete consideree, la densite optique mesuree au centre de la raie et la pression totale du melange gazeux. Le probleme est alors resolu par un calculateur analogique specifique associe. Le systeme s'applique au dosage des faibles concentrations. Le principe propose est ensuite adapte a l'analyse a partir d'une bande de vibration - rotation non resolue. (auteurs)

  13. Near-infrared-responsive, superparamagnetic Au@Co nanochains

    Directory of Open Access Journals (Sweden)

    Varadee Vittur

    2017-08-01

    Full Text Available This manuscript describes a new type of nanomaterial, namely superparamagnetic Au@Co nanochains with optical extinctions in the near infrared (NIR. The Au@Co nanochains were synthesized via a one-pot galvanic replacement route involving a redox-transmetalation process in aqueous medium, where Au salt was reduced to form Au shells on Co seed templates, affording hollow Au@Co nanochains. The Au shells serve not only as a protective coating for the Co nanochain cores, but also to give rise to the optical properties of these unique nanostructures. Importantly, these bifunctional, magneto-optical Au@Co nanochains combine the advantages of nanophotonics (extinction at ca. 900 nm and nanomagnetism (superparamagnetism and provide a potentially useful new nanoarchitecture for biomedical or catalytic applications that can benefit from both activation by light and manipulation using an external magnetic field.

  14. Synthesis of SERS active Au nanowires in different noncoordinating solvents

    Energy Technology Data Exchange (ETDEWEB)

    Hou Xiaomiao; Zhang Xiaoling, E-mail: zhangxl@bit.edu.cn [Key Laboratory of Cluster Science of Ministry of Education, Beijing Institute of Technology, Department of Chemistry, School of Science (China); Fang Yan, E-mail: fangyan@mail.cnu.edu.cn [Beijing Key Laboratory for Nano-Photonics and Nano-Structure (NPNS), Capital Normal University (China); Chen Shutang; Li Na; Zhou Qi [Key Laboratory of Cluster Science of Ministry of Education, Beijing Institute of Technology, Department of Chemistry, School of Science (China)

    2011-06-15

    Au nanowires with length up to micrometers were synthesized through a simple and one-pot solution growth method. HAuCl{sub 4} was reduced in a micellar structure formed by 1-octadecylamine and oleic acid in hexane, heptane, toluene and chloroform, respectively. As the non-polarity of noncoordinating solvents can affect the nucleation and growth rates of Au nanostructures, Au nanowires with different diameters could be obtained by changing the noncoordinating solvents in the synthetic process. The influences of the solvents on the morphology of Au nanowires were systematically studied. When using hexane as reaction solvent, the product turned to be high portion of Au nanowires with more uniform size than the others. Furthermore, surface-enhanced Raman scattering (SERS) spectrum of 2-thionaphthol was obtained on the Au nanowire-modified substrate, indicating that the as-synthesized Au nanowires have potential for highly sensitive optical detection application.

  15. Intense fluorescence of Au 20

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Chongqi; Harbich, Wolfgang; Sementa, Luca; Ghiringhelli, Luca; Apra, Edoardo; Stener, Mauro; Fortunelli, Alessandro; Brune, Harald

    2017-08-21

    Ligand-protected Au clusters are non-bleaching fluorescence markers in bio- and medical applications. We show that their fluorescence is an intrinsic property of the Au cluster itself. We find a very intense and sharp fluorescence peak located at λ =739.2 nm (1.68 eV) for Au20 clusters in a Ne matrix held at 6 K. The fluorescence reflects the HOMO-LUMO diabatic bandgap of the cluster. The cluster shows a very rich absorption fine structure reminiscent of well defined molecule-like quantum levels. These levels are resolved since Au20 has only one stable isomer (tetrahedral), therefore our sample is mono-disperse in cluster size and conformation. Density-functional theory (DFT) and time-dependent DFT calculations clarify the nature of optical absorptionand predict both main absorption peaks and intrinsic fluorescence in good agreement with experiment.

  16. Study of the strength of the internal can for internally and externally cooled fuel elements intended for gas graphite reactors; Etude de la tenue de la gaine interne pour-element combustible a refroidissement interne et externe d'un reacteur graphite-gaz

    Energy Technology Data Exchange (ETDEWEB)

    Boudouresque, B; Courcon, P; Lestiboubois, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    The cartridge of an internally and externally cooled annular fuel element used in gas-graphite reactors is made up of an uranium fuel tube, an external can and an internal can made of magnesium alloy. For the thermal exchange between the internal can and the fuel to be satisfactory, it is necessary for the can to stay in contact with the uranium under all temperature conditions. This report, based on a theoretical study, shows how the internal can fuel gap varies during the processes of canning, charging into the reactor and thermal cycling. The following parameters are considered: tube diameter, pressure of the heat carrying gas, gas entry temperature, plasticity of the can alloy. It is shown that for all operating conditions the internal can of a 77 x 95 element, planned for a gas-graphite reactor with a 40 kg/cm{sup 2} gas pressure, should remain in contact with the fuel. (authors) [French] La cartouche d'un element combustible annulaire, a refroidissement interne et externe pour reacteur graphite-gaz, est composee d'un tube combustible en uranium, d'une gaine externe et d'une gaine interne en alliage de magnesium. Pour que l'echange thermique entre la gaine interne et le combustible soit bon, il faut que la gaine reste appliquee sur l'uranium quel que soit le regime de temperature. Cette note a pour but de montrer comment, d'apres une etude theorique, le jeu combustible-gaine interne varie au cours des operations de gainage, de chargement dans le reacteur, et des cyclages thermiques. Les parametres suivants sont etudies: diametres de tube, pression du gaz caloporteur, temperature d'entree du gaz, plasticite de l'alliage de gaine. Il est montre que, quel que soit le regime de fonctionnement, la gaine interne d'un element 77 x 95, en projet pour un reacteur graphite-gaz sous pression de 40 kg/cm{sup 2}, doit rester appliquee sur le combustible. (auteurs)

  17. Intrathecal application of /sup 198/Au colloid in acute leukemia and non-Hodgkin's lymphoma in chilhood. 2. Metaphylaxis of meningosis neoplastica

    Energy Technology Data Exchange (ETDEWEB)

    Metz, O; Unverricht, A; Stoll, W [Friedrich-Schiller-Universitaet, Jena (German Democratic Republic)

    1979-08-01

    7 children suffering from acute lymphatic leukemia (ALL) and non-Hodgkin's lymphoma, resp., were injected intrathecally with /sup 198/Au colloid for metaphylaxis. The children had been cured of 8 relapses of miningosis and received irregularly intrathecal injections of methotrexate for cerebral maintenance therapy. The median cerebral period of remission was 52 weeks. 1 child suffering from ALL had been free from meningosis relapses for 128 weeks. Continuous cytostatic therapy is necessary for methaphylaxis. However, despite of the good results presented, /sup 198/Au colloid can not be recommended for long-term therapy because radiation injuries are to be expected.

  18. Enjeux juridiques du contrôle des émissions personnelles de gaz à effet de serre par un dispositif de carte carbone

    Directory of Open Access Journals (Sweden)

    Sandrine Rousseaux

    2011-02-01

    Full Text Available La carte carbone individuelle est un dispositif innovant, qui permet d’impliquer les particuliers dans la lutte face au changement climatique. Ce dispositif consiste à limiter leurs émissions de gaz à effet de serre, ce qui suppose de suivre leur consommation de certains produits et services. Ce mode de contrôle des émissions personnelles soulève parfois des controverses, la carte carbone pouvant être perçue comme un instrument de rationnement potentiellement liberticide. Ces deux aspects sont discutés sur la base d’une analyse comparative de la conception et des modalités de mise en œuvre des différents dispositifs de carte carbone, établis ou envisagés en Europe et aux États-Unis. Il en ressort que les controverses ne sont pas réellement fondées.The individual carbon card is an innovative mechanism that helps involve individuals in the fight against climate change. It consists in limiting their greenhouse gas emissions, which requires monitoring a part of their goods and services consumption. This method of personal emissions control is much debated since the carbon card may be perceived as a rationing tool and raises civil liberty issues. Both of these controversial aspects are discussed on the basis of a comparative analysis of how the various carbon card programs, established or contemplated in Europe and in the USA, are designed and implemented. The findings are these controversies are somewhat groundless.

  19. Mobility of Rb{sup +} and Cs{sup +} ions in gases at high pressures; Mobilite des ions Rb{sup +} et Cs{sup +} dans les gaz a haute pression

    Energy Technology Data Exchange (ETDEWEB)

    Bacconnet, E. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-07-01

    A theoretical study and mobility measurements have been made of Rb{sup +} and Cs{sup +} ions moving in gases at high pressures (10{sup -2} to 25 kg/cm{sup 2}). The theoretical study has been effected using the results of P. Langevin who considers the ions and molecules as elastic spheres and takes into account the electrical polarization forces. The practical work has been carried out using the Rb{sup +} and Cs{sup +} ions emitted by a thermal source; for the measurement of their velocity the method using an ionic beam cut by four grids was employed. Since the source does not work in atmospheres containing oxygen (even in the combined state) the tests only involved pure gases: nitrogen, argon, helium at pressures of from 10{sup -2} to 12 kg/cm{sup 2}. The overall results show that the Rb{sup +} and Cs{sup +} ionic mobilities are very similar and that for fairly-short times spent by the ions in the gas, the measurement results are in agreement with theory. An increase in these times favours a degradation of the ions, which always leads to a decrease in the mobility. This effect is most marked in helium. The gases argon and nitrogen behave identically towards Rb{sup +} and Cs{sup +} ions. (author) [French] Une etude theorique et des mesures de mobilite ont ete effectuees pour des ions Rb{sup +} et Cs{sup +} se deplacant dans des gaz a haute pression (10{sup -2} a 25 kg/cm{sup 2}). L'etude theorique a ete effectuee en utilisant les resultats de P. Langevin qui assimile les ions et les molecules a des spheres elastiques et tient compte des forces de polarisation electrique. L'etude pratique a ete realisee en utilisant des ions Rb{sup +} et Cs{sup +} emis par une source thermique et pour la mesure de leur vitesse, la methode de coupure du faisceau ionique au moyen de quatre grilles a ete adoptee. La source ne fonctionnant pas dans des atmospheres contenant de l'oxygene (meme a l'etat combine) les essais ont seulement porte sur des gaz purs: azote

  20. Mobility of Rb{sup +} and Cs{sup +} ions in gases at high pressures; Mobilite des ions Rb{sup +} et Cs{sup +} dans les gaz a haute pression

    Energy Technology Data Exchange (ETDEWEB)

    Bacconnet, E [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-07-01

    A theoretical study and mobility measurements have been made of Rb{sup +} and Cs{sup +} ions moving in gases at high pressures (10{sup -2} to 25 kg/cm{sup 2}). The theoretical study has been effected using the results of P. Langevin who considers the ions and molecules as elastic spheres and takes into account the electrical polarization forces. The practical work has been carried out using the Rb{sup +} and Cs{sup +} ions emitted by a thermal source; for the measurement of their velocity the method using an ionic beam cut by four grids was employed. Since the source does not work in atmospheres containing oxygen (even in the combined state) the tests only involved pure gases: nitrogen, argon, helium at pressures of from 10{sup -2} to 12 kg/cm{sup 2}. The overall results show that the Rb{sup +} and Cs{sup +} ionic mobilities are very similar and that for fairly-short times spent by the ions in the gas, the measurement results are in agreement with theory. An increase in these times favours a degradation of the ions, which always leads to a decrease in the mobility. This effect is most marked in helium. The gases argon and nitrogen behave identically towards Rb{sup +} and Cs{sup +} ions. (author) [French] Une etude theorique et des mesures de mobilite ont ete effectuees pour des ions Rb{sup +} et Cs{sup +} se deplacant dans des gaz a haute pression (10{sup -2} a 25 kg/cm{sup 2}). L'etude theorique a ete effectuee en utilisant les resultats de P. Langevin qui assimile les ions et les molecules a des spheres elastiques et tient compte des forces de polarisation electrique. L'etude pratique a ete realisee en utilisant des ions Rb{sup +} et Cs{sup +} emis par une source thermique et pour la mesure de leur vitesse, la methode de coupure du faisceau ionique au moyen de quatre grilles a ete adoptee. La source ne fonctionnant pas dans des atmospheres contenant de l'oxygene (meme a l'etat combine) les essais ont seulement porte sur des gaz purs: azote, argon, helium et pour

  1. Low-energy electron observation of graphite and molybdenite crystals. Application to the study of graphite oxidation; Observation au moyen d'electrons de faible energie de cristaux de graphite et de molybdenite. Application a l'etude de l'oxydation du graphite

    Energy Technology Data Exchange (ETDEWEB)

    David, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    The LEED study of cleaved (0001) faces of crystals having a layered structure allowed to investigate flakes free of steps on graphite and molybdenite, to show twinning on natural graphite. By intensity measurements and computation in the case of a kinematical approximation it has been possible to determine an inner potential of 19 eV for graphite and to identify the direction of the Mo-S bond of the surface layer of molybdenite. The oxidation of graphite has been studied by observing changes, in symmetry of the diffraction patterns and by mass spectrometry of the gases evolved during the oxidation. No surface compounds have been detected and the carbon layers appeared to be peeled off one after the other. The oxidation took place at temperatures higher than 520 C under an oxygen pressure of 10{sup -5} torr. (author) [French] L'etude par diffraction des electrons lents des faces (0001) de cristaux ayant une structure en feuillet a permis de mettre en evidence des plages sans gradins sur des clivages de graphite et de molybdenite caracterisees par la symetrie ternaire des diagrammes, de montrer l'existence de macles sur des cristaux de graphite naturel. Un calcul utilisant une approximation cinematique a ete applique aux intensites mesurees des taches de diffraction; il a ete ainsi possible de determiner un potentiel interne de 19 eV pour le graphite et de preciser la direction de la liaison Mo-S du feuillet superficiel de la molybdenite. L'oxydation du graphite a ete etudiee en mettant en relation des changements de symetrie des diagrammes de diffraction avec l'analyse des gaz provenant de la reaction carbone-oxygene. Il a ete montre qu'il n'y avait pas formation de composes de surface et que les couches de carbone etaient enlevees les unes apres les autres. L'oxydation a ete observee sous une pression d'oxygene de 10{sup -5} torr au-dessus de 520 C. (auteur)

  2. Conductive Au nanowires regulated by silk fibroin nanofibers

    Science.gov (United States)

    Dong, Bo-Ju; Lu, Qiang

    2014-03-01

    Conductive Au-biopolymer composites have promising applications in tissue engineering such as nerve tissue regeneration. In this study, silk fibroin nanofibers were formed in aqueous solution by regulating silk self-assembly process and then used as template for Au nanowire fabrication. We performed the synthesis of Au seeds by repeating the seeding cycles for several times in order to increase the density of Au seeds on the nanofibers. After electroless plating, densely decorated Au seeds grew into irregularly shaped particles following silk nanofiber to fill the gaps between particles and finally form uniform continuous nanowires. The conductive property of the Au-silk fibroin nanowires was studied with current-voltage ( I-V) measurement. A typical ohmic behavior was observed, which highlighted their potential applications in nerve tissue regeneration.

  3. Facile synthesis and electrochemiluminescence application of concave trisoctahedral Pd@Au core-shell nanocrystals bound by {331} high-index facets.

    Science.gov (United States)

    Zhang, Ling; Niu, Wenxin; Li, Zhiyuan; Xu, Guobao

    2011-10-07

    Concave trisoctahedral (TOH) Pd@Au core-shell nanocrystals bound by {331} facets have been synthesized for the first time. Pd nanocubes and cetyltrimethylammonium chloride were used as the structure-directing cores and capping agents, respectively. Their optical and electrocatalytic properties were investigated. This journal is © The Royal Society of Chemistry 2011

  4. One-step construction of an electrode modified with electrodeposited Au/SiO2 nanoparticles, and its application to the determination of NADH and ethanol

    International Nuclear Information System (INIS)

    Liu, X.; Li, B.; Wang, X.; Li, C.

    2010-01-01

    A new electrode was developed by one-step potentiostatic electrodeposition (at -2. 0 V for 20 s) of Au/SiO 2 nanoparticles on a glassy carbon electrode. The resulting electrode (nano-Au/SiO 2 /GCE) was characterized by scanning electronic microscopy, X-ray photoelectron spectroscopy and electrochemical techniques. The electrochemical behavior of dihydronicotinamide adenine dinucleotide (NADH) at the nano-Au/SiO 2 /GCE were thoroughly investigated. Compared to the unmodified electrode, the overpotential decreased by about 300 mV, and the current response significantly increased. These changes indicated that the modified electrode showed excellent catalytic activity in the oxidation of NADH. A linear relationship was obtained in the NADH concentration range from 1. 0 x 10 -6 to 1. 0 x 10 -4 mol L -1 . In addition, amperometric sensing of ethanol at the nano-Au/SiO 2 /GCE in combination with alcohol dehydrogenase and nicotinamide adenine dinucleotide was successfully demonstrated. A wide linear response was also found for ethanol in the range from 5. 0 x 10 -5 to 1. 0 x 10 -3 mol L -1 and 1. 0 x 10 -3 to 1. 0 x 10 -2 mol L -1 , respectively. The method was successfully applied to determine ethanol in beer and biological samples. (author)

  5. Together on the same planet. Gaz de France and sustainable development in 2006

    International Nuclear Information System (INIS)

    2006-01-01

    This document presents the sustainable development policy of Gaz de France group. It identifies the challenges the group has to face in order to control the environmental impact of the Group's activities (exploration, production, procurement, re-gasification, transmission, storage, distribution, marketing and shares, services). The approach used is based on a voluntary commitment of the Group to dialogue and share current challenges with all its stakeholders, and to imagine other roads to development. The initiatives consist in clean production practices, development of renewable energy sources, energy conservation, investment in research, safety improvement, solidarity with underprivileged people, respect of local environment and of codes of conduct, accompanying local economic development and development of clean transport systems. (J.S.)

  6. Fusion special: E.ON/Ruhrgas, EDF/Gaz de France? Trends. Interview. Inquiry. Portrait

    International Nuclear Information System (INIS)

    Schneid, O.; Carbier, M.Ch.

    2003-01-01

    This issue of 'Energies news' newsletter comprises 6 articles dealing with: the E.ON/Ruhrgas fusion and the birth of a leader of the gas-electric power convergence in Europe (the serial story of the fusion, the compromise with the adverse parties); the key economical data of RWE; the proposal of fusion between EdF (Electricite de France) and Gaz de France (interview of M. Boiteux, honorary president of EdF); the reorganization of RWE activities in France (interview of R. Felgentreff, head of RWE Solutions France); travel inside the French power market (part.2: opening of the power market to all professionals); portrait of J. Masdeu-Arus, co-president of a study group at the French house of commons, who made a report about the economical and financial situation of EdF. (J.S.)

  7. Facile Synthesis of Au Nanocube-CdS Core-Shell Nanocomposites with Enhanced Photocatalytic Activity

    Science.gov (United States)

    Liu, Xiao-Li; Liang, Shan; Li, Min; Yu, Xue-Feng; Zhou, Li; Wang, Qu-Qua

    2014-06-01

    Au nanocube-CdS core-shell nanocomposites are prepared by using a one-pot method in aqueous phase with cetyltrimethylammonium bromide as the surfactant. The extinction properties and photocatalytic activity of Au-CdS nanocomposites are investigated. Compared with the pure Au nanocubes, the Au-CdS nanocomposites exhibit enhanced extinction intensity. Compared with CdS nanoparticles, the Au-CdS nanocomposites exhibit improved photocatalytic activity. Furthermore, the photocatalytic efficiency is even better with the increase in the core size of the Au-CdS nanocomposites. Typically, the photocatalytic efficiency of the Au-CdS with 62 nm sized Au nanocubes is about two times higher than that of the pure CdS. It is believed that the Au-CdS nanocomposites may find potential applications in environmental fields, and this synthesis method can be extended to prepare a wide variety of functional composites with Au cores.

  8. Apport de la géostatistique à la description des stockages de gaz en aquifère Contribution of Geostatistics to Describing Aquifer Gas-Storage Reservoirs

    Directory of Open Access Journals (Sweden)

    Delhomme J. P.

    2006-11-01

    Full Text Available L'étude du comportement d'un réservoir de gaz en nappe aquifère réclame une connaissance aussi précise que possible des caractéristiques géométriques et pétrophysiques des couches réservoirs. Les moyens d'investigation sont de deux natures : - forages permettant une connaissance locale des roches réservoirs ; - mesures sismiques conduisant à une estimation approximative des cotes de certains repères stratigraphiques, en des points situés le long de profils. Les données recueillies sont donc, par nature, fragmentaires et discrètes : là où elles sont absentes, il y a lieu d'estimer les grandeurs étudiées en tenant compte au mieux de notre connaissance de leur variabilité spatiale. Ce problème d'interpolation optimale a donné lieu, depuis une vingtaine d'années, à l'élaboration et la mise en pratique d'un outil théorique particulièrement bien adapté aux besoins exprimés par les techniciens des sciences de la terre : la théorie des variables régionalisées due à G. Matheron. Des programmes informatiques mettant en oeuvre cette théorie sont actuellement opérationnels. Des exemples d'application en sont donnés : - tracé automatique de cartes structurales à partir des données de forages et des mesures sismiques ; - estimation des incertitudes de prévision sur les profondeurs ; - tracé de plusieurs variantes de carte compatibles avec les données ; - établissement d'éléments statistiques relatifs à une grandeur caractéristique d'un stockage : volume stockable par exemple ; - génération automatique des données nécessaires à la mise en oeuvre d'un modèle maillé de réservoir. Predicting and monitoring the behavior of an aquifer gas-storage reservoir requires as precise a knowledge as possible of the geometric and petrophysical properties of the reservoir layer. Two ways of obtaining this information can be given: (a Boreholes which provide local knowledge of the reservoir, and (b Seismic measurements

  9. A Comprehensive Numerical Study on Effects of Natural Gas Composition on the Operation of an HCCI Engine Une étude numérique complète sur les effets de la composition du gaz naturel carburant sur le réglage d’un moteur HCCI

    Directory of Open Access Journals (Sweden)

    Jahanian O.

    2011-11-01

    éristiques d’auto-inflammation du mélange dans le cylindre et la performance du moteur HCCI. Cet article met l’accent sur l’influence de la composition du gaz naturel sur le fonctionnement du moteur en mode HCCI. Six différentes compositions de gaz naturel (y compris le méthane pur ont été examinées pour étudier les performances du moteur au moyen d’un modèle thermo-cinétique zéro-dimensionnel. Le code de simulation inclut la cinétique chimique détaillée de la combustion du gaz naturel, y compris le mécanisme étendu de Zeldovich pour évaluer les émissions de NOx. Les résultats ont été validés par comparaison avec des données expérimentales provenant d’autres travaux. La richesse et le taux de compression ont été maintenus constants, mais les effets de la vitesse du moteur et de la température initiale du mélange ont été étudiés. Les résultats montrent que la valeur maximale de la pression dans le cylindre et la température dépendent du nombre Wobbe du carburant. En outre, la puissance indiquée du moteur est linéairement liée au nombre Wobbe du carburant. Le travail indiqué brut, la pression moyenne indiquée brute et les NOx ont aussi été utilisés pour comparer les performances du moteur utilisant des carburants de compositions différentes.

  10. Cell for studying electron-adsorbed gas interactions; Cellule d'etudes des interactions electron-gaz adsorbe

    Energy Technology Data Exchange (ETDEWEB)

    Golowacz, H; Degras, D A [Commissariat a l' Energie Atomique, 91 - Saclay (France). Centre d' Etudes Nucleaires, Deptartement de Physique des Plasmas et de la Fusion Controlee, Service de Physique Appliquee, Service de Physique des Interractions Electroniques, Section d' Etude des Interactions Gaz-Solides

    1967-07-01

    The geometry and the technology of a cell used for investigations on electron-adsorbed gas interactions are described. The resonance frequencies of the surface ions which are created by the electron impact on the adsorbed gas are predicted by simplified calculations. The experimental data relative to carbon monoxide and neon are in good agreement with these predictions. (authors) [French] Les caracteristiques geometriques et technologiques generales d'une cellule d'etude des interactions entre un faisceau d'electrons et un gaz adsorbe sont donnees. Un calcul simplifie permet de prevoir les frequences de resonance des ions de surface crees par l'impact des electrons sur le gaz adsorbe. Les donnees experimentales sur l'oxyde de carbone et le neon confirment les previsions du calcul. (auteurs)

  11. The synthesis of Au@C@Pt core-double shell nanocomposite and its application in enzyme-free hydrogen peroxide sensing

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Yayun; Li, Yuhui; Jiang, Yingying [College of Chemistry & Environment, Minnan Normal University, Zhangzhou 363000 (China); Li, Yancai, E-mail: liyancai@mnnu.edu.cn [College of Chemistry & Environment, Minnan Normal University, Zhangzhou 363000 (China); Fujian Province Key Laboratory of Modern Analytical Science and Separation Technology, Minnan Normal University, Zhangzhou 363000 (China); Li, Shunxing [College of Chemistry & Environment, Minnan Normal University, Zhangzhou 363000 (China); Fujian Province Key Laboratory of Modern Analytical Science and Separation Technology, Minnan Normal University, Zhangzhou 363000 (China)

    2016-08-15

    Highlights: • A novel Au@C@Pt core-double shell nanocomposite was synthesized and characterized by SEM(*), TEM and EDS, etc. • The synthesized Au@C@Pt core-double shell nanocomposite showed high sensitivity and selectivity to electrocatalytic reduction of hydrogen peroxide (H{sub 2}O{sub 2}) and can be used to fabricate enzyme-free H{sub 2}O{sub 2} electrochemical sensor. • The H{sub 2}O{sub 2} sensor has two linear range of 9.0 μM–1.86 mM and 1.86 mM–7.11 mM, respectively, with a low limit of detection of 0.13 μM. • The H{sub 2}O{sub 2} sensor also displays high anti-interference ability, good stability and reproducibility. - Abstract: A novel Au@C@Pt core-double shell nanocomposite was synthesized and used to fabricate enzyme-free electrochemical sensor for rapid and sensitive detection of hydrogen peroxide (H{sub 2}O{sub 2}). The well-designed Au@C@Pt core-double shell nanocomposite was characterized by scanning electron microscopy (SEM), transmission electron microscope (TEM) and energy-dispersed spectrum (EDS). The Au@C@Pt core-double shell nanocomposite modified glassy carbon electrode (Au@C@Pt/GCE) exhibits good electrocatalytic activity towards H{sub 2}O{sub 2} reduction at 0.0 V and can be used as H{sub 2}O{sub 2} sensor. The sensor displays two wide linear ranges towards H{sub 2}O{sub 2} detection. The one is 9.0 μM–1.86 mM with high sensitivity of 144.7 μA mM{sup −1} cm{sup −2}, and the other is 1.86 mM–7.11 mM with sensitivity of 80.1 μA mM{sup −1} cm{sup −2}. When signal to noise (S/N) is 3, the calculated detection limit (LOD) is 0.13 μM. Furthermore, the interference from the common interfering species such as glucose, ascorbic acid, dopamine and uric acid can be effectively avoided to H{sub 2}O{sub 2} detection. Additionally, the H{sub 2}O{sub 2} sensor also displays good stability and reproducibility.

  12. High-Temperature Gas-Cooled Reactor Critical Experiment and its Application to Thorium Absorption Rates; Experience Critique pour l'Etude d'un Reacteur a Haute Temperature, Refroidi par un Gaz et son Application a la Determination des Taux d'Absorption du Thorium; Kriticheskij opyt, postavlennyj na vysokotemperaturnom reaktore s gazovym okhlazhdeniem, i primenenie ego dlya opredeleniya stepeni pogloshcheniya toriya; Experimento Critico Efectuado en un Reactor de Elevada Temperatura Refrigerado por Gas y su Aplicacion para Calcular los Indices de Absorcion del Torio

    Energy Technology Data Exchange (ETDEWEB)

    Bardes, R. G.; Brown, J. R.; Drake, M. K.; Fischer, P. U.; Pound, D. C.; Sampson, J. B.; Stewart, H. B. [General Dynamics Corporation,San Diego, CA (United States)

    1964-04-15

    the fact that the thorium is dispersed in graphite and the usual cadmium-ratio technique is difficult to apply. Comparison of experimental and theoretical results shows excellent agreement over a range of variables. In addition, the results of both activation and reactivity measurements of Doppler coefficient are in agreement, a fact which is felt to be significant in view of the disparity between results from these two techniques in the literature. (author) [French] Lors de l'etude du reacteur HTGR a haute temperature refroidi par un gaz, et de son premier prototype a Peach Bottom, la General Atomic Division de la societe General Dynamics a decide qu'il fallait proceder a une experience critique pour obtenir certaines donnees d'entree necessaires pour l'analyse nucleaire. Aux fins de l'etude nucleaire theorique, les besoins particuliers en donnees d'entree relatives aux absorptions par le thorium ont amene les ingenieurs a concevoir un assemblage experimental critique compose d'un reseau central entoure d*une region tampon et d'une region de commande. Ce type.d'assemblage, dans lequel on peut creer le spectre a mesurer dans le reseau central relativement petit ayant la geometrie voulue, permet d'obtenir des donnees d'entree tres diverses pour les etudes de projets nouveaux, au point de vue de l'analyse nucleaire. Le memoire indique les avantages particuliers que presente cette methode par rapport a celle qiu consiste a construire une maquette, ainsi que le role de la theorie pour determiner quelles experiences sont le plus utiles et comment utiliser ensuite ces experiences dans la verification des procedes d'etude. Les auteurs ont mis au point deux methodes relativement nouvelles qui peuvent etre utilisees avec l'assemblage decrit ci-dessus: une methode d'oscillation de la reactivite pour determiner le coefficient Doppler pour le thorium; une methode d'activation pour determiner a la fois l'integrale de resonance pour le thorium disperse dans le graphite et ses

  13. New combustion, environment regulations: the answers for natural gas; Nouvelles reglementations, combustion, environnement: les reponses pour le gaz naturel

    Energy Technology Data Exchange (ETDEWEB)

    Le Peltier-Marc, A. [Gaz de France (GDF), 75 - Paris (France)

    1997-12-31

    This paper reports on the point of view from Gaz de France (GdF) company concerning the potential consequences of the use of natural gas in combustion systems with respect to the new regulations about combustion and environment. Details concerning the measures relative to the limitation of pollutants in small combustion installations (2 - 20 MW) are given (chimney height, SO{sub x}, NO{sub x} and dusts content in exhaust gases). (J.S.)

  14. La qualité en industrie, application : travail sur la qualité produit au sein d'une industrie agro-alimentaire

    OpenAIRE

    Ispa, Myriam

    2004-01-01

    L'important développement industriel et les évolutions sociales majeures de ces dernières décennies sont à l'origine de l'avènement de la qualité qui occupe aujourd'hui une place à part entière dans les entreprises. Son importance est universellement reconnue et elle se situe maintenant au coeur des dernières théories managériales. Après avoir défini le concept de qualité et retracé son évolution au cours du temps, cette étude établit, dans un premier temps, une présentation complète du manag...

  15. A measuring method of photo-electric cross section. Application to high-Z elements between 40 keV and 220 keV. Measurement of K absorption edge energy of Au, Th, U, Pu

    International Nuclear Information System (INIS)

    Chartier, J.-L.

    1977-09-01

    This study first describes a bent crystal monochromator developed for the production of monochromatic beams in a continuous energy range from 30 to 250 keV; it is completed by a metrological application of the device (determination of K absorption edge energy of Au, Th, U, Pu). A method and the associated experimental procedure were developed to measure the photo-electric cross section for high-Z elements; the results are presented with a relative uncertainty ranging between 3 and 6%. Finally, the experimental values are compared with values calculated from theories using self-consistent potential models [fr

  16. Contribution to the chromatography of atmospheric gases (1963); Contribution a la chromatographie des gaz de l'air (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Ghalamsiah, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-06-15

    In the first part, the author studies the gas-phase chromatographic separation of the atmospheric rare gases, of hydrogen, and of some gaseous compounds of carbon (CO, CO{sub 2}, CH{sub 4}) using inactive gases to obtain the most favourable operational conditions far this separation. In the second part, the optimum conditions for detecting non-active gases using an ionisation chamber and a {sup 239}Pu radioactive source emitting 5.15 MeV {alpha} particles are determined. (author) [French] Dans une premiere partie, l'auteur etudie la separation par chromatographie en phase gazeuse des gaz rares de l'air, de l'hydrogene, et de quelques composes gazeux du carbone (CO, CO{sub 2}, CH{sub 4}) en utilisant des gaz inactifs an vue d'obtenir les conditions experimenales les plus favorables en vue de cette separation. Dans une deuxieme partie, les conditions optimales de detection de gaz non actifs a l'aide d'une chambre d'ionisation, en utilisant comme source radioactive du {sup 239}Pu qui emet des particules {alpha} de 5,15 MeV, sont determinees. (auteur)

  17. AuNP-RF sensor: An innovative application of RF technology for sensing pathogens electrically in liquids (SPEL) within the food supply chain.

    Science.gov (United States)

    Matta, Leann Lerie; Karuppuswami, Saranraj; Chahal, Premjeet; Alocilja, Evangelyn C

    2018-07-15

    Rapid detection techniques of pathogenic bacteria in the liquid food supply chain are of significant research interest due to their pivotal role in preventing foodborne outbreaks, and in maintaining high standards of public health and safety. Milk and dairy products are of particular interest due to their widespread consumption across the globe. In this paper, a biosensor for detecting pathogenic bacteria in milk using dextrin-capped gold nanoparticles (d-AuNP) as labels decoded at microwave frequencies is presented. The SPEL (sensing pathogens electrically in liquids) biosensor consists of a 3D printed vial and uses an RF reader and an RFID (radio-frequency identification) compatible Split Ring Resonator (SRR) based tag. The SPEL biosensor is capable of detecting bacteria at 5 log CFU/mL within 75 min, with the possibility of testing multiple concurrent samples. Detection is based on impedance loading of SRR by d-AuNP bound to pathogenic bacteria. Spectrophotometry, along with carbohydrate-functionalized magnetic nanoparticle (MNP) cell capture, is used to verify the sensitivity of the SPEL biosensor with respect to d-AuNP presence. The proof-of-concept device, along with challenges and opportunities for commercialization, are also outlined. Copyright © 2018. Published by Elsevier B.V.

  18. The Vital Function of Fe3O4@Au nanocomposites for Hydrolase Biosensor Design and Its Application in Detection of Methyl Parathion

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Yuting; Zhang, Weiying; Lin, Yuehe; Du, Dan

    2013-02-04

    A nanocomposite of gold nanoparticles (AuNPs) decorating a magnetic Fe3O4 core was synthesized using cysteamine (SH–NH2) as linker, and characterized by TEM, XPS, UV and electrochemistry. Then a hydrolase biosensor, based on self-assembly of methyl parathion hydrolase (MPH) on the Fe3O4@Au nanocomposite, was developed for sensitive and selective detection of the organophosphorus pesticide (OP) methyl parathion. The magnetic nanocomposite provides an easy way to construct the enzyme biosensor by simply exerting an external magnetic field, and also provides a simple way to renew the electrode surface by removing the magnet. Unlike inhibition-based enzyme biosensors, the hydrolase is not poisoned by OPs and thus is reusable for continuous measurement. AuNPs not only provide a large surface area, high loading efficiency and fast electron transfer, but also stabilize the enzyme through electrostatic interactions. The MPH biosensor shows rapid response and high selectivity for detection of methyl parathion, with a linear range from 0.5 to 1000 ng/mL and a detection limit of 0.1 ng/mL. It also shows acceptable reproducibility and stability. The simplicity and ease of operation of the proposed method has great potential for on-site detection of P–S containing pesticides and provides a promising strategy to construct a robust biosensor.

  19. Research into zirconium alloys resistant to carbon dioxide under pressure at temperatures of up to 600 deg C (1963); Recherche d'alliages de zirconium compatibles avec le gaz carbonique sous pression jusqu'a 500 ou 600 deg C (1063)

    Energy Technology Data Exchange (ETDEWEB)

    Baque, P; Dominget, R; Bossard, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-07-01

    Zirconium is a metal having a relatively low neutron capture cross-section and a high melting point; it is thus possible to consider its use in particular as a canning material for fuel elements in CO{sub 2}-cooled nuclear reactors. A preliminary study of several types of zirconium showed that the metal is already strongly oxidised in this gas at 500 deg C. The 'breakaway' phenomenon is generalised; the oxidation rate is then linear and depends on the carbon dioxide pressure. An attempt was therefore made to find binary and tertiary alloys in order to improve the metal behaviour. Several interesting compositions were found: 1, 1.6 and 2.5 per cent of copper, 2 per cent of vanadium, and 0.05 and 0.5 per cent of calcium. Tertiary copper-molybdenum and copper-phosphorus alloys are also less liable to oxidation and in particular do not exhibit the 'breakaway' phenomenon even after a prolonged treatment at 600 deg C. (authors) [French] Le zirconium se trouve parmi les metaux a section de capture neutronique relativement faible et possede une temperature de fusion elevee; aussi peut on songer a l'employer notamment comme materiau de gainage d'elements combustibles pour reacteurs nucleaires refroidis au gaz carbonique. Une etude prealable de plusieurs qualites de zirconium a montre que le metal est deja assez fortement oxyde dans ce gaz des 500 deg C. En effet, le phenomene de ''breakaway'' est general; la vitesse d'oxydation devient alors lineaire et depend de la pression du gaz carbonique. La recherche d'alliages binaires et ternaires a donc ete entreprise afin de tenter d'ameliorer le comportement du metal. Elle a permis d'aboutir a quelques compositions interessantes: cuivre 1, 1,6 et 2,5 pour cent, vanadium 2 pour cent, et calcium 0,05 et 0,5 pour cent. Des alliages ternaires au cuivre-molybdene et cuivre-phosphore sont egalement moins oxydables, et en particulier ne presentent pas le phenomene de ''breakaway'', meme apres une longue exposition a 600 deg C. (auteurs)

  20. Theory of high frequency discharge in gases under low pressures. Experimental investigation of high-frequency type ion sources; Theorie de la decharge haute frequence dans les gaz aux faibles pressions. Etude experimentale des sources d'ions du type haute frequence

    Energy Technology Data Exchange (ETDEWEB)

    Salmon, Jean

    1955-03-02

    The first part of this research thesis addresses the theory of high frequency discharge in gases under low pressures, and first proposes a calculation of the distribution function for electrons present within the gas. The author then studies the evolution of electron density within a discharge tube by assigning the governing role in electron multiplication to the secondary emission of tube walls. The second part proposes a detailed description of a source operating at 96.5 Mc/s, a discussion of measurements performed on this source, and the search for a theoretical explanation of some of its properties. The author then briefly analyses various existing types of high frequency sources, and finally discusses their use in corpuscular microscopy and in particle accelerators [French] La presente these comprend deux parties. La premiere est consacree a la theorie de la decharge haute frequence dans les gaz aux faibles pressions et comporte tout d'abord le calcul de la fonction de distribution des electrons presents au sein du gaz. Nous etudions ensuite l'evolution de la densite electronique a l'interieur d'un tube a decharge en attribuant, a l'emission secondaire des parois de ce dernier, le role essentiel dans la multiplicalion des electrons. Nous obtenons ainsi les conditions d'amorcage. Tout au long de cette etude, on doit distinguer soigneusement le cas ou le libre parcours moyen des electrons dans le gaz est inferieur aux dimensions de l'enceinte et le cas ou il leur est superieur. La deuxieme partie comprend la description detaillee d'une source fonctionnant sur 96.5 Mc/s, l'expose des mesures effectuees sur celle-ci et la recherche d'une explication theorique de certaines de ses proprietes. Nous faisons ensuite une breve analyse des divers types de sources d'ions haute frequence existant a l'heure actuelle et nous terminons en traitant de leur utilisation en microscopie corpusculaire et dans les accelerateurs de particules.

  1. Les possibilités des turbines de détente dans les industries gazière et pétrolière Application of Expansion Turbines in the Gas and Oil Industry

    Directory of Open Access Journals (Sweden)

    Verneau A.

    2006-11-01

    Full Text Available Utilisées depuis longtemps dans l'industrie cryogénique, les turbines de détente voient leur intérêt augmenter actuellement en tant que turbines de récupération de l'énergie des laminages. Cette énergie peut servir à l'entraînement de compresseurs, pompes ou générateurs électriques. Il existe surtout des turbines dans la gamme de 200 à 20 000 ch. Deux types principaux sont développés : les turbines axiales et les turbines radiales. Les particularités techniques et les domaines d'emploi de chaque type sont discutés. Ue intérêt particulier est porté au domaine des petites puissances (de 100 kW jusqu'à quelques centaines de watts. L'évolution du rendement en fonction de la puissance est étudiée et quelques types spéciaux bien adaptés à cette gamme, tels que les turbines périphériques, sont présentés. Quelques indications sur la récupération de l'énergie des liquides par turbines sont également données. Ensuite, plusieurs exemples d'applications sont exposés tels que : récupération de fractions condensables du gaz naturel (butane, propane, éthane, récupération de gaz perdu, récupération de l'énergie des laminages lors de la distribution et au niveau des stockages souterrains, turbine hydraulique de lavage de gaz, récupération de l'énergie des fumées de cracking catalytique, entraînement de petits générateurs électriques dans la gamme de quelques kilowatts à quelques centaines de watts. Enfin, nous abordons la technologie et les dispositions constructives particulières en nous attachant plus spécialement aux problèmes de régulation, étanchéité, paliers. Des techniques nouvelles telles que l'emploi de paliers à gaz et leurs avantages sont décrites. Les difficultés dues aux basses températures et à la condensation sont examinées. Nous terminons par quelques considérations d'ordre économique destinées à prévoir la rentabilité d'une installation de récupération d

  2. Visual Investigation of Retrograde Phenomena and Gas Condensate Flow in Porous Media Étude visuelle des phénomènes rétrogrades et de l'écoulement des gaz de condensat en milieux poreux

    Directory of Open Access Journals (Sweden)

    Danesh A.

    2006-11-01

    és avec des mélanges synthétiques d'hydrocarbures gazeux multicomposants, mais aussi avec un condensat naturel provenant de la mer du Nord. Le comportement en écoulement polyphasique des systèmes soumis à l'essai, observé et enregistré en vidéo, est présenté ici, accompagné des données mesurées. En milieu poreux mouillé à l'eau, on a observé que le condensat se forme en film mince continu sur l'eau connée, site préférentiel de condensation. En abaissant la pression au-dessous de la cricondenbar du système, on a provoqué la croissance du condensat presque exclusivement sur les anneaux d'eau à l'entrée des pores et sur les pores aveugles. On a constaté que le condensat passe à travers les films minces même en cas de saturation faible, sans que cela améliore sa récupération. Le rythme de la baisse de pression influence le cisaillement de l'écoulement de gaz et influence fortement, on l'a constaté, la propagation du condensat. Des instabilités localisées pourraient entraîner des mouvements importants du condensat dans certaines zones poreuses, mais en aval les effets capillaires exerceraient une action retardatrice qui diminuerait la récupération du condensat. On ne doit pas penser que les rapports entre la perméabilité relative et la saturation du gaz de condensat prendront la même forme que la perméabilité relative pétrole-gaz dans le cas de récupération par un gaz en solution ou un gaz injecté.

  3. Kinetic study of the reaction of uranium with various carbon-containing gases; Etude cinetique de la reaction sur l'uranium de differents gaz carbones

    Energy Technology Data Exchange (ETDEWEB)

    Feron, G [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1963-09-15

    The kinetic study of the reaction U + CO{sub 2} and U + CO has been performed by a thermogravimetric method on a spherical uranium powder, in temperature ranges respectively from 460 to 690 deg. C and from 570 to 850 deg. C. The reaction with carbon dioxide leads to uranium dioxide. A carbon deposition takes place at the same time. The global reactions is the result of two reactions: U + 2 CO{sub 2} {yields} UO{sub 2} + 2 CO U + CO{sub 2} {yields} UO{sub 2} + C The reaction with carbon monoxide leads to a mixture of dioxide UO{sub 2}, dicarbide UC{sub 2} and free carbon. The main reaction can be written. U + CO {yields} 1/2 UO{sub 2} + 1/2 UC{sub 2} The free carbon results of the disproportionation of the carbon monoxide. A remarkable separation of the two phases UO{sub 2} and UC{sub 2} can be observed. A mechanism accounting for the phenomenon has been proposed. The two reactions U + CO{sub 2} and U + CO begin with a long germination period, after which, the reaction velocity seems to be limited in both cases by the ionic diffusion of oxygen through the uranium dioxide. (author) [French] L'etude cinetique des reactions U sol + CO{sub 2} gaz et U sol + CO gaz a ete effectuee par thermogravirnetrie sur une poudre d'uranium a grains spheriques, les domaines de temperature etudies s'etendant respectivement de 460 a 690 deg. C et de 570 a 850 deg. C. L'action du dioxyde de carbone conduit au dioxyde d'uranium UO{sub 2}; il se produit en meme temps un depot de carbone. La reaction globale resulte des deux reactions: U + 2 CO{sub 2} {yields} UO{sub 2} + 2 CO U + CO{sub 2} {yields} UO{sub 2} + C Le mono-oxyde de carbone conduit a un melange de dioxyde UO{sub 2}, de dicarbure UC{sub 2} et de carbone libre. La reaction principale s'ecrit: U + CO {yields} 1/2 UO{sub 2} + 1/2 UC{sub 2} Le carbone libre provient de la dismutation du mono-oxyde de carbone. On observe une separation remarquable des deux phases UO{sub 2} et UC{sub 2}; un mecanisme rendant compte de ce phenomene a

  4. Electrochemical Properties of Alkanethiol Monolayers Adsorbed on Nanoporous Au Surfaces

    International Nuclear Information System (INIS)

    Chu, Yeon Yi; Seo, Bora; Kim, Jong Won

    2010-01-01

    We investigated the electrochemical properties of alkanethiol monolayers adsorbed on NPG surfaces by cyclic voltammetry and electrochemical impedance spectroscopy, and the results are compared to those on flat Au surfaces. The reductive desorption of alkanethiols on NPG surfaces is observed in more negative potential regions than that on flat Au surfaces due the stronger S-Au interaction on NPG surfaces. While the electron transfer through alkanethiol monolayers on flat Au surfaces occurs via a tunneling process through the monolayer films, the redox species can permeate through the monolayers on NPG surfaces to transfer the electrons to the Au surfaces. The results presented here will help to elucidate the intrinsic electrochemical properties of alkanethiol monolayers adsorbed on curved Au surfaces, particularly on the surface of AuNPs. Self-assembled monolayers (SAMs) of thiolate molecules on Au surfaces have been the subject of intensive research for the last few decades due to their unique physical and chemical properties. The well-organized surface structures of thiolate SAMs with various end-group functionalities can be further utilized for many applications in biology and nanotechnology. In addition to the practical applications, SAMs of thiolate molecules on Au surfaces also provide unique opportunities to address fundamental issues in surface chemistry such as self-organized surface structures, electron transfer behaviors, and moleculesubstrate interactions. Although there have been numerous reports on the fundamental physical and chemical properties of thiolate SAMs on Au surfaces, most of them were investigated on flat Au surfaces, typically on well-defined Au(111) surfaces

  5. Direct electron transfer biosensor for hydrogen peroxide carrying nanocomplex composed of horseradish peroxidase and Au-nanoparticle – Characterization and application to bienzyme systems

    Directory of Open Access Journals (Sweden)

    Yusuke Okawa

    2015-09-01

    Full Text Available A reagentless electrochemical biosensor for hydrogen peroxide was fabricated. The sensor carries a monolayer of nanocomplex composed of horseradish peroxidase and Au-nanoparticle, and responds to hydrogen peroxide through the highly efficient direct electron transfer at a mild electrode potential without any soluble mediator. Formation of the nanocomplex was studied with visible spectroscopy and size exclusion chromatography. The sensor performance was analyzed based on a hydrodynamic electrochemical technique and enzyme kinetics. The sensor was applied to fabrication of sensors for glucose and uric acid through further modification of the nanocomplex-carrying electrode with the corresponding hydrogen peroxide-generating oxidases, glucose oxidase and urate oxidase, respectively.

  6. Oxidation and reduction kinetics of eutectic SnPb, InSn, and AuSn: a knowledge base for fluxless solder bonding applications

    DEFF Research Database (Denmark)

    Kuhmann, Jochen Friedrich; Preuss, A.; Adolphi, B.

    1998-01-01

    : (1) SnPb; (2) InSn; (3) AuSn. The studies of the oxidation kinetics show that the growth of the native oxide, which covers the solder surfaces from the start of all soldering operations is self-limiting. The rate of oxidation on the molten, metallic solder surfaces is significantly reduced...... and reduction kinetics, are applied to flip-chip (FC) bonding experiments in vacuum with and without the injection of H2. Wetting in vacuum is excellent but the self-alignment during flip-chip soldering is restricted. The desired, perfectly self-aligned FC-bonds have been only achieved, using evaporated...

  7. Thiol-PEG-carboxyl-stabilized Fe2O3/Au nanoparticles targeted to CD105: Synthesis, characterization and application in MR imaging of tumor angiogenesis

    International Nuclear Information System (INIS)

    Zhang, Song; Gong, Mingfu; Zhang, Dong; Yang, Hua; Gao, Fabao; Zou, Liguang

    2014-01-01

    Objective: To detect tumor angiogenesis in tumor-bearing mice using thiol-PEG-carboxyl-stabilized Fe 2 O 3 /Au nanoparticles targeted to CD105 on magnetic resonance imaging (MRI). Methods: Fe 2 O 3 /Au nanoparticles (hybrids) were prepared by reducing Au 3+ on the surface of Fe 2 O 3 nanoparticles. Hybrids were stabilized with thiol-PEG-carboxyl via the Au–S covalent bond, and further conjugated with anti-CD105 antibodies through amide linkages. Characteristics of the hybrid-PEG-CD105 nanoparticles were evaluated. Using these nanoparticles, the labeling specificity of human umbilical vein endothelial cells (HUVECs) was evaluated in vitro. MRI T2*-weighted images were obtained at different time points after intravenous administration of the hybrid-PEG-CD105 nanoparticles in the tumor-bearing mice. After MR imaging, the breast cancer xenografts were immediately resected for immunohistochemistry staining and Prussian blue staining to measure the tumor microvessel density (MVD) and evaluate the labeling of blood microvessels by the hybrid-PEG-CD105 nanoparticles in vivo. Results: The mean diameter of the hybrid-PEG-CD105 nanoparticles was 56.6 ± 8.0 nm, as measured by transmission electron microscopy (TEM). Immune activity of the hybrid-PEG-CD105 nanoparticles was 53% of that of the anti-CD105 antibody, as detected by enzyme-linked immunosorbent assay (ELISA). The specific binding of HUVECs with the hybrid-PEG-CD105 nanoparticles was proved by immunostaining and Prussian blue staining in vitro. For breast cancer xenografts, the combination of the hybrid-PEG-CD105 nanoparticles with blood microvessels was detectable by MRI after 60 min administration of the contrast agent. The T2* relative signal intensity (SI R ) was positively correlated with the tumor MVD (R 2 = 0.8972). Conclusion: Anti-CD105 antibody-coupled, thiol-PEG-carboxyl-stabilized core–shell Fe 2 O 3 /Au nanoparticles can efficiently target CD105 expressed by HUVECs. Furthermore, the hybrid-PEG-CD105

  8. Study of gases contained in an Antarctica glacier; Etude des gaz contenus dans un glacier antarctique

    Energy Technology Data Exchange (ETDEWEB)

    Raynaud, D [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1967-07-15

    This report presents a study of gases contained in ice samples taken from a drilling 97.8 meters deep in the coastal zone of Adelie Land (Antarctica). Simultaneously, a study has been made of the composition of the atmospheric air and of the gases extracted in situ from the firn. Carbon dioxyde was analysed by means of gas-phase chromatography and argon, oxygen and nitrogen by means of mass spectrometry. The results obtained show that for the most part the oxygen concentration decreases with an increase in the depth of the drilling. The values range from a maximum of 20,83 per cent of the volume at the surface to a minimum of 19,46 per cent of the volume at a depth of 87 meters. The results also show that the distribution of carbon dioxide concentration does not vary with the depth. These concentrations are either in the same range as or lower than the concentration of CO{sub 2} found in atmospheric air. The different results are discussed. (author) [French] Le present travail rend compte d'analyses de gaz contenus dans des echantillons de glace provenant d'un forage de 97,8 m de profondeur, realise dans la zone cotiere de la Terre Adelie (Antarctique). Parallelement, la composition d'air atmospherique et de gaz extraits in situ du neve a ete etudiee. La chromatographie en phase gazeuse a ete utilisee pour analyser le CO{sub 2} et la spectrometrie de masse pour analyser l'argon, l'oxygene et l'azote. Les resultats obtenus indiquent essentiellement le long du forage: - une decroissance de la teneur en oxygene avec la profondeur, les valeurs extremes etant de 20.83 pour cent en volume a la surface et de 19,46 pour cent en volume a - 87 metres, - une repartition des teneurs en CO{sub 2} sans correlation nette avec la profondeur, ces teneurs etant de l'ordre ou inferieures a la teneur atmospherique. Les differents resultats sont discutes. (auteur)

  9. Catalytic activity of Au nanoparticles

    DEFF Research Database (Denmark)

    Larsen, Britt Hvolbæk; Janssens, Ton V.W.; Clausen, Bjerne

    2007-01-01

    Au is usually viewed as an inert metal, but surprisingly it has been found that Au nanoparticles less than 3–5 nm in diameter are catalytically active for several chemical reactions. We discuss the origin of this effect, focusing on the way in which the chemical activity of Au may change with par......Au is usually viewed as an inert metal, but surprisingly it has been found that Au nanoparticles less than 3–5 nm in diameter are catalytically active for several chemical reactions. We discuss the origin of this effect, focusing on the way in which the chemical activity of Au may change...... with particle size. We find that the fraction of low-coordinated Au atoms scales approximately with the catalytic activity, suggesting that atoms on the corners and edges of Au nanoparticles are the active sites. This effect is explained using density functional calculations....

  10. Development of casting investment preventing blackening of noble metal alloys part 1. Application of developed investment for Ag-Pd-Cu-Au alloy.

    Science.gov (United States)

    Kakuta, Kiyoshi; Nakai, Akira; Goto, Shin-ichi; Wakamatsu, Yasushi; Yara, Atushi; Miyagawa, Yukio; Ogura, Hideo

    2003-03-01

    The objective of this study is to develop a casting investment that prevents the blackening of the cast surface of noble metal alloys. The experimental investments were prepared using a gypsum-bonded investment in which the metallic powders such as boron (B), silicon (Si), aluminum (Al) and titanium (Ti) were added as oxidizing agents. An Ag-Pd-Cu-Au alloy was cast into the mold made of the prepared investment. The effect of the addition of each metal powder was evaluated from the color difference between the as-cast surface and the polished surface of the cast specimen. The color of the as-cast surface approached that of the polished surface with increasing B and Al content. A lower mean value in the color difference was obtained at 0.25-1.00 mass% B content. B and Al are useful as an additive in a gypsum-bonded investment to prevent the blackening of an Ag-Pd-Cu-Au alloy. The effects of Si and Ti powder addition could not be found.

  11. Magnetic susceptibilities of liquid Cr-Au, Mn-Au and Fe-Au alloys

    Energy Technology Data Exchange (ETDEWEB)

    Ohno, S.; Shimakura, H. [Niigata University of Pharmacy and Applied Life Sciences, Higashijima, Akiha-ku, Niigata 956-8603 (Japan); Tahara, S. [Faculty of Science, University of the Ryukyus, Nishihara-cho, Okinawa 903-0213 (Japan); Okada, T. [Niigata College of Technology, Kamishin’eicho, Nishi-ku, Niigata 950-2076 (Japan)

    2015-08-17

    The magnetic susceptibility of liquid Cr-Au, Mn-Au, Fe-Au and Cu-Au alloys was investigated as a function of temperature and composition. Liquid Cr{sub 1-c}Au{sub c} with 0.5 ≤ c and Mn{sub 1-c}Au{sub c} with 0.3≤c obeyed the Curie-Weiss law with regard to their dependence of χ on temperature. The magnetic susceptibilities of liquid Fe-Au alloys also exhibited Curie-Weiss behavior with a reasonable value for the effective number of Bohr magneton. On the Au-rich side, the composition dependence of χ for liquid TM-Au (TM=Cr, Mn, Fe) alloys increased rapidly with increasing TM content, respectively. Additionally, the composition dependences of χ for liquid Cr-Au, Mn-Au, and Fe-Au alloys had maxima at compositions of 50 at% Cr, 70 at% Mn, and 85 at% Fe, respectively. We compared the composition dependences of χ{sub 3d} due to 3d electrons for liquid binary TM-M (M=Au, Al, Si, Sb), and investigated the relationship between χ{sub 3d} and E{sub F} in liquid binary TM-M alloys at a composition of 50 at% TM.

  12. Gas transport through porous media; Sur le transport des gaz a travers les milieux poreux

    Energy Technology Data Exchange (ETDEWEB)

    Breton, J P [Commissariat a l' Energie Atomique Saclay (France). Centre d' Etudes Nucleaires

    1968-06-01

    In the first part of this work we derive a rigorous transport theory for a mixture of gases passing through a bed of spheres, when the temperature is uniform. We solve the Boltzmann equation, putting boundary conditions in the solution. Two different methods are used, according to the nature of the flow. The second part deals with the experimental work: measurements of permeability, of separation and of interdiffusion. In the last part, with the help of the new theory presented here, we are for the first time able to explain all the experimental data. (author) [French] Dans la premiere partie de ce travail nous developpons une theorie rigoureuse du transport d'un melange de gaz a travers un lit de spheres, quand la temperature est uniforme. Nous integrons l'equation de Boltzmann en introduisant des conditions aux limites dans la solution. Nous utilisons deux methodes differentes selon le regime d'ecoulement. La seconde partie est consacree a l'etude experimentale: mesures de permeametrie, de separation et d'interdiffusion. Dans la derniere partie, a l'aide de la nouvelle theorie developpee ici, nous expliquons tous les resultats experimentaux, ce qui n'avait pas ete fait jusque la. (auteur)

  13. Gas market is today strategical; Le marche du gaz est aujourd'hui strategique

    Energy Technology Data Exchange (ETDEWEB)

    Darricarrere, Y.L. [Total, 92 - Courbevoie (France)

    2006-07-01

    The energy market, and in particular the gas market, is today seething with excitement. In France, in Europe and in the rest of the world, the energy stakes are in the center of preoccupations. This article is an interview of Y.L. Darricarrere, general director of the gas and electricity division of Total group, who explains his opinions about the opening of European and French energy markets, presents the ambitions of Total group on these markets, and comments some recent events of the European energy scene: concentration between gas and electric utilities, the Suez and Gaz de France (GdF) project of merger, the risks linked with the coming in of national companies from producing countries, like Gazprom and Sonatrach, on the European market, the restriction of access of foreign companies to hydrocarbon reserves in Russia and Latin America (come back of the 'energy nationalism'), Total's policy for anticipating the increase of the world energy demand and the depletion of fossil fuel reserves. (J.S.)

  14. Stability, structural and electronic properties of benzene molecule adsorbed on free standing Au layer

    Energy Technology Data Exchange (ETDEWEB)

    Katoch, Neha, E-mail: nehakatoch2@gmail.com; Kapoor, Pooja; Sharma, Munish; Ahluwalia, P. K. [Physics Department, Himachal Pradesh University, Shimla, Himachal Pradesh, India 171005 (India); Kumar, Ashok [Center for Physical Sciences, School of Basic and Applied Sciences, Central University of Punjab, Bathinda, India, 151001 (India)

    2016-05-23

    We report stability and electronic properties of benzene molecule adsorbed on the Au atomic layer within the framework of density function theory (DFT). Horizontal configuration of benzene on the top site of Au monolayer prefers energetically over other studied configurations. On the adsorption of benzene, the ballistic conductance of Au monolayer is found to decrease from 4G{sub 0} to 2G{sub 0} suggesting its applications for the fabrications of organic sensor devices based on the Au atomic layers.

  15. Etude du déplacement de l'huile par le gaz Analysis of Oil Displacement by Gas

    Directory of Open Access Journals (Sweden)

    Delclaud J.

    2006-11-01

    Full Text Available Les ingénieurs « réservoir u prévoient avec beaucoup de difficultés l'exploitation des gisements en utilisant les relations perméabilités relatives-saturations fournies par les laboratoires. Ceci amène à se demander si le concept est valide en écoulement transitoire, si les mesures sont effectuées selon des procédures convenables, si la relation statique entre la pression capillaire et la saturation est conservée en régime variable, si enfin la méconnaissance des lois de combinaison de ces fonctions n'est pas la cause de l'insatisfaction des ingénieurs. Le travail présenté ici traite des trois premiers points. Deux séries d'expériences sont réalisées à cet effet : - d'une part, des expériences de déplacement de l'huile par le gaz, où l'on s'intéresse à l'établissement et à la caractérisation de phénomènes pseudo-stationnaires. Les échantillons poreux choisis sont de faibles dimensions. Ils permettent ainsi de réduire la durée des périodes transitoires; - d'autre part, des expériences de déplacement sur des échantillons homogènes de grandes dimensions où l'on étudie les phénomènes transitoires. On mesure, tout au long du massif, la pression dans les deux phases et la saturation. Les perméabilités relatives sont calculées en tout point et à tout instant, à partir des équations de continuité. II ressort de ces travaux que la relation perméabilité relative-saturation est la même en tout point du milieu poreux, tout au long de l'écoulement transitoire, qu'elle ne dépend pas de la vitesse d'écoulement et que la relation pression capillaire-saturation coïncide avec celle établie par la méthode des états restaurés. La validité du concept en écoulement transitoire est donc prouvée. La méthode de WELGE, JOHNSON, BOSSLER et NAUMANN conduit à des résultats différents de ceux obtenus. On montre, pour expliquer ces écarts, que les hypothèses théoriques de cette méthode sont

  16. LA DIVERSITÉ DÉPLOYÉE AU SEIN DE L’UNIVERSITÉ D’ENTREPRISE : L’APPLICATION CONCRÈTE D’UNE VALEUR ADOPTÉE PAR LA DIRECTION GÉNÉRALE

    Directory of Open Access Journals (Sweden)

    Virginia Drummond-Guitel

    2009-09-01

    Full Text Available La diversité devenue une valeur incontournable adoptée par les grands groupes, encore faut-t-il trouver les moyens concrets pour l’intégrer dans les pratiques des ressources humaines et dans les mentalités des personnes. Le présent papier a pour but de montrer comment les valeurs de la diversité adoptées par la direction générale ont été déclinées et appliquées dans un processus de sélection de candidats pour une formation continue au sein d’une grande organisation internationale. A travers l’application d’une méthode qualitative de recherche, 10 (dix dirigeants ayant conçu la formation et 42 (quarante-deux managers ayant suivi le programme confirment l’atteinte du but stratégique de cette formation, autrement dit, l’atteinte d’une vision partagée (SENGE, 1991, à travers la consolidation d’un fort sentiment d’appartenance à la culture organisationnelle (SCHEIN, 1995. Les managers ont été sélectionnés selon leurs différentes professions, cultures nationales et différents secteurs d’activités, confirmant ainsi une promotion de la diversité au sein de l’organisation.

  17. Effect of Silicon on Activity Coefficients of Siderophile Elements (P, Au, Pd, As, Ge, Sb, and In) in Liquid Fe, with Application to Core Formation

    Science.gov (United States)

    Righter, K.; Pando, K.; Danielson, L. R.; Humayun, M.; Righter, M.; Lapen, T.; Boujibar, A.

    2016-01-01

    Earth's core contains approximately 10 percent light elements that are likely a combination of S, C, Si, and O, with Si possibly being the most abundant. Si dissolved into Fe liquids can have a large effect on the magnitude of the activity coefficient of siderophile elements (SE) in Fe liquids, and thus the partitioning behavior of those elements between core and mantle. The effect of Si can be small such as for Ni and Co, or large such as for Mo, Ge, Sb, As. The effect of Si on many siderophile elements is unknown yet could be an important, and as yet unquantified, influence on the core-mantle partitioning of SE. Here we report new experiments designed to quantify the effect of Si on the partitioning of P, Au, Pd, and many other SE between metal and silicate melt. The results will be applied to Earth, for which we have excellent constraints on the mantle siderophile element concentrations.

  18. Contribution au développement d’une nouvelle technologie de séchage solaire. Application à la mangue.

    OpenAIRE

    Heilporn, Caroline

    2013-01-01

    Le séchage de denrées alimentaires est une filière clé de la transformation des aliments, tant dans nos pays que dans les pays en voie de développement. Cette opération, largement utilisée dans l’industrie agro-alimentaire, permet d’augmenter significativement la durée et la diversité d’utilisation de nombreux aliments. Néanmoins, au cours d’une opération de séchage, l’élévation de la température et l’exposition à des débits d’air importants peuvent entraîner des altérations biologiques, chim...

  19. Comportment of various magnesium alloys in carbon dioxide under pressure, between 400 and 600 deg; Compatibilite de divers alliages de magnesium avec le gaz carbonique sous pression entre 400 et 600 deg

    Energy Technology Data Exchange (ETDEWEB)

    Darras, R; Baque, P; Chevilliard, C [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    'magnesium oxyde fritte'. Les echantillons, preleves dans des produits files, sont convenablement polis, deux etats de surface reproductibles etant realises a titre comparatif. Les essais ont ete effectues dans le gaz carbonique purifie, aux pressions de 25 et 60 atmospheres, et a des temperatures allant de 400 a 600, au moyen d'autoclaves speciaux en acier inoxydable, chauffes exterieurement. Leur duree est en general superieure a 1000 heures. Les equations des courbes d'augmentation de poids obtenues sont du type ({delta}p){sup n} = k.t (({delta}p en mg/cm{sup 2} et t en heures), l'exposant n etant voisin de 2, du moins jusqu'a 500 deg. C. En se referant a des resultats precedemment acquis quant a certains de ces materiaux exposes dans le gaz carbonique sous pression atmospherique et sous 15 atmospheres, il apparait que: 1) Pour un materiau determine: - a une pression donnee, l'oxydation augmente avec la temperature, - a une temperature donnee, l'oxydation augmente avec la pression, - dans les memes conditions de temperature et de pression, les resultats obtenus varient peu suivant les deux etats de surface etudies; 2) les alliages Mg-Zr presentent une resistance a l'oxydation amelioree par rapport au magnesium non allie; 3) l'alliage magnox est beaucoup moins avantageux dans le gaz carbonique que dans l'air, par rapport aux autres alliages. D'une facon generale, les courbes d'oxydation tendant vers un palier apres un certain temps d'exposition, la compatibilite de tous les alliages consideres avec le gaz carbonique apparait satisfaisante jusqu'a une temperature voisine de 500 deg. C, dans les conditions operatoires presentement definies; au dessus de 500 deg. C, des differences notables apparaissent entre les divers alliages, mais des phenomenes de sublimation interferent avec ceux d'oxydation, de sorte qu'un classement des divers materiaux ne peut etre base que sur leur resultante. (auteur)

  20. Synthesis of Fulvic Acid-Coated Magnetite (Fe3O4–FA and Its Application for the Reductive Adsorption of [AuCl4]–

    Directory of Open Access Journals (Sweden)

    Philip Anggo Krisbiantoro

    2017-11-01

    Full Text Available Fulvic acid-coated magnetite (Fe3O4–FA has been synthesized through coprecipitation method using NH4OH. Synthesis conducted by cheap and environmentally friendly preparation used iron salts and extracted fulvic acid (FA from Peat soil of Rawa Pening, Central Java, Indonesia. Characterization using FT–IR indicated that the coating of FA on Fe3O4 occurred through the formation of chemical bond between iron of Fe3O4 and carboxyl group of FA. The XRD measurement indicated that coated Fe3O4 successfully dispersed in smaller size than uncoated Fe3O4, i.e. from 16.67 to 14.84 nm for Fe3O4 and Fe3O4–FA, respectively. Synthesized Fe3O4–FA has pHPZC 6.37 and stable at pH > 3.0. The extracted FA has total acidity 866.61 cmol kg–1, –COOH content 229.77 cmol kg–1 and –OH content 636.84 cmol kg–1. Fe3O4–FA has total acidity 494.86 cmol kg–1, –COOH content 67.80 cmol kg–1 and –OH content 427.06 cmol kg–1. The adsorption rate constant (k of [AuCl4]– on Fe3O4–A according to the Ho kinetic model was 8006.53 g mol–1 min–1. The adsorption capacity (qmax according to Langmuir isotherm model was 1.24 × 10–4 mol g–1. The presence of reduction towards the adsorbed [AuCl4]– was shown by the appearance of peaks at 2θ: 37.41; 43.66; 64.25, and 76.67° in the XRD diffractogram.

  1. Le CRDI au Ghana

    International Development Research Centre (IDRC) Digital Library (Canada)

    pour prévenir le paludisme, des études ayant démontré que leur utilisation pouvait réduire considérablement la mortalité infantile. Les chercheurs ont également suggéré aux gouvernements différents moyens pour inciter les gens à acheter les moustiquaires et à les utiliser correctement. Les TI au service de la démocratie.

  2. Mise au point

    African Journals Online (AJOL)

    et traité à temps, le risque de complications et de morbidité peut être écarté. Les auteurs rapportent 2 cas de kystes de la vallécule. La tomodensitométrie a confirmé la présence d'une formation kystique prenant origine au niveau de la val- lécule. Une laryngoscopie directe a été faite pour les 2 patients sous anesthésie ...

  3. Efficient H2 production over Au/graphene/TiO2 induced by surface plasmon resonance of Au and band-gap excitation of TiO2

    International Nuclear Information System (INIS)

    Liu, Yang; Yu, Hongtao; Wang, Hua; Chen, Shuo; Quan, Xie

    2014-01-01

    Highlights: • Both surface plasmon resonance and band-gap excitation were used for H 2 production. • Au/Gr/TiO 2 composite photocatalyst was synthesized. • Au/Gr/TiO 2 exhibited enhancement of light absorption and charge separation. • H 2 production rate of Au/Gr/TiO 2 was about 2 times as high as that of Au/TiO 2 . - Abstract: H 2 production over Au/Gr/TiO 2 composite photocatalyst induced by surface plasmon resonance of Au and band-gap excitation of TiO 2 using graphene (Gr) as an electron acceptor has been investigated. Electron paramagnetic resonance study indicated that, in this composite, Gr collected electrons not only from Au with surface plasmon resonance but also from TiO 2 with band-gap excitation. Surface photovoltage and UV–vis absorption measurements revealed that compared with Au/TiO 2 , Au/Gr/TiO 2 displayed more effective photogenerated charge separation and higher optical absorption. Benefiting from these advantages, the H 2 production rate of Au/Gr/TiO 2 composite with Gr content of 1.0 wt% and Au content of 2.0 wt% was about 2 times as high as that of Au/TiO 2 . This work represents an important step toward the efficient application of both surface plasmon resonance and band-gap excitation on the way to converting solar light into chemical energy

  4. Case-book of all decisions taken by the Regie du gaz naturel from April 1, 1995 - March 31, 1996

    International Nuclear Information System (INIS)

    Precourt, L.; L'Heureux, L.

    1996-01-01

    All decisions taken by the Regie du gaz naturel du Quebec during the period of April 1, 1995 to March 31, 1996 were presented. The case-book includes all legal decisions concerning the supply, transmission and storage of natural gas delivered or intended for delivery by pipeline distribution in the Province of Quebec. The text of the Act, amendments and revisions to the Act, and summaries of Board decisions are provided in French and English. Also included are a number of indexes for ease of reference and a glossary of relevant terms

  5. Surface-enhanced Raman spectroscopy with Au-nanoparticle substrate fabricated by using femtosecond pulse

    Science.gov (United States)

    Zhang, Wending; Li, Cheng; Gao, Kun; Lu, Fanfan; Liu, Min; Li, Xin; Zhang, Lu; Mao, Dong; Gao, Feng; Huang, Ligang; Mei, Ting; Zhao, Jianlin

    2018-05-01

    Au-nanoparticle (Au-NP) substrates for surface-enhanced Raman spectroscopy (SERS) were fabricated by grid-like scanning a Au-film using a femtosecond pulse. The Au-NPs were directly deposited on the Au-film surface due to the scanning process. The experimentally obtained Au-NPs presented local surface plasmon resonance effect in the visible spectral range, as verified by finite difference time domain simulations and measured reflection spectrum. The SERS experiment using the Au-NP substrates exhibited high activity and excellent substrate reproducibility and stability, and a clearly present Raman spectra of target analytes, e.g. Rhodamine-6G, Rhodamine-B and Malachite green, with concentrations down to 10‑9 M. This work presents an effective approach to producing Au-NP SERS substrates with advantages in activity, reproducibility and stability, which could be used in a wide variety of practical applications for trace amount detection.

  6. Synthesis and electrocatalytic activity of Au/Pt bimetallic nanodendrites for ethanol oxidation in alkaline medium.

    Science.gov (United States)

    Han, Xinyi; Wang, Dawei; Liu, Dong; Huang, Jianshe; You, Tianyan

    2012-02-01

    Gold/Platinum (Au/Pt) bimetallic nanodendrites were successfully synthesized through seeded growth method using preformed Au nanodendrites as seeds and ascorbic acid as reductant. Cyclic voltammograms (CVs) of a series of Au/Pt nanodendrites modified electrodes in 1M KOH solution containing 1M ethanol showed that the electrocatalyst with a molar ratio (Au:Pt) of 3 exhibited the highest peak current density and the lowest onset potential. The peak current density of ethanol electro-oxidation on the Au(3)Pt(1) nanodendrites modified glassy carbon electrode (Au(3)Pt(1) electrode) is about 16, 12.5, and 4.5 times higher than those on the polycrystalline Pt electrode, polycrystalline Au electrode, and Au nanodendrites modified glassy carbon electrode (Au dendrites electrode), respectively. The oxidation peak potential of ethanol electro-oxidation on the Au(3)Pt(1) electrode is about 299 and 276 mV lower than those on the polycrystalline Au electrode and Au dendrites electrode, respectively. These results demonstrated that the Au/Pt bimetallic nanodendrites may find potential application in alkaline direct ethanol fuel cells (ADEFCs). Copyright © 2011 Elsevier Inc. All rights reserved.

  7. Application des fluides supercritiques à la production d'hydrocarbures. Exploitation des gisements par récupération assistée et applications diverses : pétrole, sables, schistes, charbons Application of Supercritical Fluids to Hydrocarbon Production. Enhanced Oi Recovery and Miscellaneous Applications: Oil, Tar Sands, Shales, Coals

    Directory of Open Access Journals (Sweden)

    Behar E.

    2006-11-01

    Full Text Available Le taux moyen de récupération par drainage naturel des gisements pétroliers atteint à peine 30 %. La récupération assistée désigne l'ensemble des procédés d'exploitation qui permettent d'accroître très sensiblement ce taux. Parmi ces procédés, l'injection de fluides supercritiques joue un rôle prometteur. Les principaux fluides actuellement utilisés sont : le méthane (ou plus généralement les gaz hydrocarbures dits pauvres , l'azote et enfin le gaz carbonique. Les domaines d'application et les mécanismes thermodynamiques mis en jeu sont brièvement exposés, les sources de fluides supercritiques disponibles au voisinage des gisements pétroliers sont rapidement répertoriées et certains problèmes d'exploitation évoqués. Outre leur application en récupération assistée, les fluides supercritiques sont également impliqués dans des procédés de raffinage et d'extraction divers. C'est le procédé de désasphaltage de fractions pétrolières lourdes qui, en 1956, a fait l'objet de la première application industrielle exploitant les fortes variations du pouvoir solvant d'un fluide au voisinage de son point critique. Ce procédé connaît, depuis une dizaine d'années, un regain d'intérêt du fait de l'économie d'énergie qu'il permet de réaliser. D'autre part, les schistes bitumineux, les sables asphaltiques et les charbons, sources d'hydrocarbures considérables pour l'avenir, constituent des domaines d'applications potentielles originales des fluides supercritiques. Les procédés spécifiques, pour la plupart en cours de développement au stade pilote, sont passés en revue. The average recovery by natural drainage from oil fields is barely 30%. Enhanced recovery includes all production processes which appreciably increase this rate. Among such processes, supercritical fluid flooding is quite promising. The main fluids now used are methane (or, more generally, so-called leangaseous hydrocarbons, nitrogen and carbon

  8. Tourisme et communautés rurales au Venezuela : vers une application des principes du Développement Durable

    Directory of Open Access Journals (Sweden)

    Olivier Dehoorne

    2008-02-01

    Full Text Available L’évolution récente du tourisme international au Venezuela est particulièrement intéressante : l'activité touristique qui reste très largement concentrée sur la côte caribéenne, et notamment l’île de Margarita, se diversifie au profit de nouveaux centres d’intérêt dans les régions intérieures. L’affichage de nouvelles volontés politiques sur la scène régionale et internationale, sous l’impulsion du président Chavez, a perturbé le marché touristique national qui était dominé pour les clientèles nord-américaines ; le Venezuela apparaît désormais aux yeux des Etats-Unis comme un pays à risque, instable. C’est dans ce contexte que s’inscrit le « Programa Andes Tropicales » [PAT] qui soutient le  développement rural dans les parcs nationaux ; ce programme repose sur la participation des populations locales et leur implication dans les politiques de conservation des ressources naturelles et culturelles sources de revenus. Le soutien financier des microprojets familiaux et communautaires doivent permettent de lutter contre la pauvreté.The recent evolution of international tourism in Venezuela is particularly interesting. Even if tourism activity remains heavily concentrated on the Caribbean coast, in particular on the island of Margarita, it is nevertheless diversifying gradually to make way for new areas of interest in the country’s interior. The display of new political will on the regional and international scene, under the leadership of President Chavez, has disrupted the national tourism market which was dominated by North American customers. Venezuela now appears in the eyes of the United States as a country that is at risk,and therefore unstable. It is in this context that the “Programa Andes Tropicales" [PAT] was developed to promote rural development in national parks; This program is based on the participation and involvement of local populations in the development of appropriate

  9. Application of modified multiwalled carbon nanotubes as a sorbent for simultaneous separation and preconcentration trace amounts of Au(III) and Mn(II)

    International Nuclear Information System (INIS)

    Shamspur, Tayebeh; Mostafavi, Ali

    2009-01-01

    A solid phase extraction procedure is proposed for simultaneous separation and preconcentration trace amounts of Au(III) and Mn(II) in an aqueous medium by using a column of multiwalled carbon nanotubes modified with the analytical reagent N,N'-bis(2-hydroxybenzylidene)-2,2'(aminophenylthio)ethane. An implementation, it was found that the sorption is quantitative in the pH range 5.0-7.5, whereas quantitative desorption occurs instantaneously with 4.0 mL of 0.1 mol L -1 Na 2 S 2 O 3. Selected elements were also determined by flame atomic absorption spectrometry. Linearity was maintained between 0.2 ng mL -1 to 25 μg mL -1 for gold and 0.08 ng mL -1 to 5 μg mL -1 for manganese in the original solution. Various parameters such as the effect of pH, flow rate, type and amount of eluent, breakthrough volume and interference of a large number of anions and cations on the recovery of the selected ions was studied. Under optimum conditions, the detection limits (3 s, n = 10) for analytes were 0.03 ng mL -1 (gold) and 0.01 ng mL -1 (manganese). The method was successfully applied for separation and determination of gold and manganese ions in water and standard samples.

  10. Development of a method for studying non-linear phenomena in plasma; Mise au point d'une methode d'etude des phenomenes non lineaires dans un plasma

    Energy Technology Data Exchange (ETDEWEB)

    Gonfalone, A [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1965-03-01

    gaz d'electrons est a la base des meilleures methodes de mesure des frequences de collisions electroniques dans l'ionosphere. Dans les plasmas de laboratoire l'apparition de ces phenomenes est liee a un champ critique de valeur elevee. Tout en n'utilisant qu'une source electromagnetique de puissance relativement faible, nous avons mis au point une methode hyperfrequence simple qui permet de mettre ces phenomenes en evidence, de les mesurer et d'en donner une interpretation elementaire. Une onde electromagnetique, fournie par un klystron de 1 W de puissance, interagit avec une decharge HF (25 MHz) dans le volume d'une cavite TE{sub 111}. Le tube contenant la decharge et l'axe de la cavite cylindrique sont colineaires a un champ magnetique pouvant atteindre une valeur telle que la frequence de l'onde soit egale a la frequence gyromagnetique des electrons. La courbe de resonance de la cavite, qui depend de la densite electronique et de la frequence des collisions, devient d'autant plus dissymetrique que la puissance absorbee est grande et que la frequence gyromagnetique des electrons est voisine de la frequence de l'onde incidente. L'etude de la resonance permet de calculer les coefficients de proportionnalite qui relient les variations de la densite et de la frequence de collisions a la puissance absorbee. Les experiences ont ete faites en faisant varier separement: la puissance UHF incidente, la densite electronique initiale, la pression du gaz neutre ambiant, ainsi que le champ magnetique axial. La variation de la densite electronique en fonction du champ magnetique pour une puissance UHF forte, montre une resonance de forme dissymetrique avec quelquefois un pic aigu, au voisinage de {omega}{sub H}. L'application eventuelle des proprietes mises en evidence a la realisation de dispositifs pratiques est envisagee. (auteur)

  11. L’olivier au Maroc

    Directory of Open Access Journals (Sweden)

    El Mouhtadi Issam

    2014-03-01

    Full Text Available L’olivier est une culture traditionnelle sur le pourtour de la Méditerranée. Il est donc naturel de trouver cet arbre au Maroc où il est présent depuis des siècles. Cultivé surtout traditionnellement jusqu’à ses dernières années, il fait l’objet maintenant d’un plan de valorisation très ambitieux pour non seulement garder le Royaume à son niveau actuel (2e producteur mondial pour l’olive de conserve et 6e pour l’huile d’olive mais pour conquérir de nouveaux marchés au niveau mondial et profiter ainsi de l’engouement que connaît cette huile reconnue pour ses bienfaits. Le plan national « Maroc Vert » permet ainsi, grâce à des subventions conséquentes, non seulement de renouveler les vergers existant avec la variété traditionnelle picholine du Maroc, mais également la plantation de nouvelles variétés en super-intensif dans le but d’industrialiser au maximum de nouveaux vergers. Il en est de même pour la transformation des olives en huile de bonne qualité avec la mise en place d’unités de trituration modernes qui doivent supplanter à terme la multitude de « maâsra » et réduire ainsi l’impact environnemental dû aux margines. L’olive ne sera plus dans l’avenir que représentée par son huile et ses formes comestibles, mais les résidus de son extraction seront valorisés soit sous forme de combustible élaboré pour le grignon, soit sous forme d’une base de chimie verte pour les sous-produits du raffinage. D’autres applications sont actuellement à l’étude, car le Maroc à compris, comme tous les autres grands pays producteurs, que l’olive était un nouveau gisement de richesses.

  12. Mise au point

    African Journals Online (AJOL)

    tomie est replacé et fixé par des fils d'acier, krönlein lais- sait ce fragment pédiculé au fascia temporalis afin d'évi- ter la dépression de la fosse temporale due à la désinser- tion du muscle temporal [20] ; dans notre série, après reconstitution du cadre, le muscle temporal est suturé à son point d'insertion. pour les tumeurs ...

  13. Antibacterial Au nanostructured surfaces

    Science.gov (United States)

    Wu, Songmei; Zuber, Flavia; Brugger, Juergen; Maniura-Weber, Katharina; Ren, Qun

    2016-01-01

    We present here a technological platform for engineering Au nanotopographies by templated electrodeposition on antibacterial surfaces. Three different types of nanostructures were fabricated: nanopillars, nanorings and nanonuggets. The nanopillars are the basic structures and are 50 nm in diameter and 100 nm in height. Particular arrangement of the nanopillars in various geometries formed nanorings and nanonuggets. Flat surfaces, rough substrate surfaces, and various nanostructured surfaces were compared for their abilities to attach and kill bacterial cells. Methicillin-resistant Staphylococcus aureus, a Gram-positive bacterial strain responsible for many infections in health care system, was used as the model bacterial strain. It was found that all the Au nanostructures, regardless their shapes, exhibited similar excellent antibacterial properties. A comparison of live cells attached to nanotopographic surfaces showed that the number of live S. aureus cells was flat and rough reference surfaces. Our micro/nanofabrication process is a scalable approach based on cost-efficient self-organization and provides potential for further developing functional surfaces to study the behavior of microbes on nanoscale topographies.We present here a technological platform for engineering Au nanotopographies by templated electrodeposition on antibacterial surfaces. Three different types of nanostructures were fabricated: nanopillars, nanorings and nanonuggets. The nanopillars are the basic structures and are 50 nm in diameter and 100 nm in height. Particular arrangement of the nanopillars in various geometries formed nanorings and nanonuggets. Flat surfaces, rough substrate surfaces, and various nanostructured surfaces were compared for their abilities to attach and kill bacterial cells. Methicillin-resistant Staphylococcus aureus, a Gram-positive bacterial strain responsible for many infections in health care system, was used as the model bacterial strain. It was found that all

  14. Au pairs on Facebook

    DEFF Research Database (Denmark)

    Dalgas, Karina Märcher

    2016-01-01

    Ethnographers are increasingly making use of Facebook to acquire access and general acquaintance with their field of study. However, little has been written on how Facebook is used methodologically in research that does not have social media sites as the main focus of interest. This article argues...... the au pairs resist and embrace such dominant representations, and on how such representations are ascribed different meanings in the transnational social fields of which the migrant are a part. The article is based on ethnographic fieldwork conducted between 2010 and 2014 in Denmark, the Philippines...

  15. Charge transport through O-deficient Au-MgO-Au junctions

    KAUST Repository

    Fadlallah, M. M.; Eckern, Ulrich; Rungger, Ivan; Schuster, Cosima; Schwingenschlö gl, Udo

    2009-01-01

    Metal-oxide heterostructures have been attracting considerable attention in recent years due to various technological applications. We present results of electronic structure and transport calculations for the Au-MgO-Au (metal-insulator-metal) heterostructure based on density-functional theory and the nonequilibrium Green’s functions method. The dependence of the conductance of the heterostructure on the thickness of the MgO interlayer and the interface spacing is studied. In addition, we address the effects of O vacancies. We observe deviations from an exponentially suppressed conductance with growing interlayer thickness caused by Au-O chemical bonds. Electronic states tracing back to O vacancies can increase the conductance. Furthermore, this effect can be enhanced by enlarging the interface spacing as the vacancy induced Mg states are shifted toward the Fermi energy.

  16. Charge transport through O-deficient Au-MgO-Au junctions

    KAUST Repository

    Fadlallah, M. M.

    2009-12-29

    Metal-oxide heterostructures have been attracting considerable attention in recent years due to various technological applications. We present results of electronic structure and transport calculations for the Au-MgO-Au (metal-insulator-metal) heterostructure based on density-functional theory and the nonequilibrium Green’s functions method. The dependence of the conductance of the heterostructure on the thickness of the MgO interlayer and the interface spacing is studied. In addition, we address the effects of O vacancies. We observe deviations from an exponentially suppressed conductance with growing interlayer thickness caused by Au-O chemical bonds. Electronic states tracing back to O vacancies can increase the conductance. Furthermore, this effect can be enhanced by enlarging the interface spacing as the vacancy induced Mg states are shifted toward the Fermi energy.

  17. Methods for continuous or semi-continuous analysis of gases dissolved in pressurized water; Methodes d'analyses continue et semi-continue de gaz dissous dans l'eau surpressee

    Energy Technology Data Exchange (ETDEWEB)

    Vignet, P; Gabilly, R; Lutz, J; Zermizogilou, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    }/kg of water. (authors) [French] Trois appareils ont ete mis au point pour permettre la mesure de gaz en solution dans l'eau sous une pression pouvant atteindre 200 kg/cm{sup 2}. 1 - Analyseur d'hydrogene: On mesure la variation relative de resistance d'un filament immerge dans l'eau, constitue par du palladium pur ou par un alliage palladium-platine 75.25, lors de l'absorption de l'hydrogene. On a trace les courbes d'etalonnage pour un fil de palladium pour des temperatures allant de 180 a 280 deg. C. A temperature ambiante, on a utilise un ruban en alliage palladium-platine. L'etude theorique et experimentale de la cinetique d'absorption de l'hydrogene dissous dans l'eau par un metal a permis de definir les meilleures conditions de fonctionnement de l'analyseur pour obtenir une reponse rapide, de l'ordre de quelques minutes. On utilise actuellement pour la mesure un pont alimente en courant alternatif (pont de Kohlrausch) avec compensation de temperature et systeme de regeneration periodique du filament. 2 - Analyseur d'oxygene: On sait que l'oxygene dissous dans l'eau reagit sur le thallium pour former l'hydroxyde de thallium, compose soluble dont la presence augmente la conductibilite electrique de l'eau. Pour realiser une methode de dosage basee sur ce principe, on a mis au point un conductimetre differentiel dont les caracteristiques permettent d'atteindre une excellente precision dans une gamme de 0,001 ppm a quelques dizaines de ppm d'oxygene. On examine dans quelles conditions le bruit de fond de l'appareil, du a des reactions parasites, peut etre rendu negligeable; puis on etudie la cinetique de la reaction d'oxydation du thallium par l'oxygene dissous, qui est de type diffusionnel. On a ainsi pu relier quantitativement le taux de transformation aux parametres physiques et hydrodynamiques. 3 - Analyse globale des gaz en solution: On isole, dans une bombe placee en derivation sur un circuit surpresse un volume d'eau a pression et temperature elevees. Apres

  18. Optimizing the planar structure of (1 1 1) Au/Co/Au trilayers

    International Nuclear Information System (INIS)

    Kumah, D P; Cebollada, A; Clavero, C; Garcia-MartIn, J M; Skuza, J R; Lukaszew, R A; Clarke, R

    2007-01-01

    Au/Co/Au trilayers are interesting for a range of applications which exploit their unusual optical and electronic transport behaviour in a magnetic field. Here we present a comprehensive structural and morphological study of a series of trilayers with 0-7 nm Co layer thickness fabricated on glass by ultrahigh vacuum vapour deposition. We use a combination of in situ electron diffraction, atomic force microscopy and x-ray scattering to determine the optimum deposition conditions for highly textured, flat and continuous layered structures. The 16 nm Au-on-glass buffer layer, deposited at ambient temperature, is found to develop a smooth (1 1 1) texture on annealing at 350 deg. C for 10 min. Subsequent growth of the Co layer at 150 deg. C produces a (1 1 1) textured film with lateral grain size of ∼150 nm in the 7 nm-thick Co layer. A simultaneous in-plane and out-of-plane Co lattice expansion is observed for the thinnest Co layers, converging to bulk values for the thickest films. The roughness of the Co layer is similar to that of the Au buffer layer, indicative of conformal growth. The 6 nm Au capping layer smoothens the trilayer surface, resulting in a surface roughness independent of the Co layer thickness

  19. Antibacterial Au nanostructured surfaces.

    Science.gov (United States)

    Wu, Songmei; Zuber, Flavia; Brugger, Juergen; Maniura-Weber, Katharina; Ren, Qun

    2016-02-07

    We present here a technological platform for engineering Au nanotopographies by templated electrodeposition on antibacterial surfaces. Three different types of nanostructures were fabricated: nanopillars, nanorings and nanonuggets. The nanopillars are the basic structures and are 50 nm in diameter and 100 nm in height. Particular arrangement of the nanopillars in various geometries formed nanorings and nanonuggets. Flat surfaces, rough substrate surfaces, and various nanostructured surfaces were compared for their abilities to attach and kill bacterial cells. Methicillin-resistant Staphylococcus aureus, a Gram-positive bacterial strain responsible for many infections in health care system, was used as the model bacterial strain. It was found that all the Au nanostructures, regardless their shapes, exhibited similar excellent antibacterial properties. A comparison of live cells attached to nanotopographic surfaces showed that the number of live S. aureus cells was flat and rough reference surfaces. Our micro/nanofabrication process is a scalable approach based on cost-efficient self-organization and provides potential for further developing functional surfaces to study the behavior of microbes on nanoscale topographies.

  20. A mineral quantification method for wall rocks at open pit mines, and application to the Martha Au-Ag mine, Waihi, New Zealand

    International Nuclear Information System (INIS)

    Castendyk, Devin N.; Mauk, Jeffrey L.; Webster, Jenny G.

    2005-01-01

    Pit lakes that result from open pit mining are potential water resources or potential environmental problems, depending on lake water quality. Wall rock mineralogy can affect lake chemistry if surface water inputs and/or groundwater inputs and/or lake water in contact with submerged wall rocks react with the wall rock minerals. This study presents a mineral quantification method to measure the distribution and concentration of wall rock minerals in open pit mines, and applies the method to the Martha epithermal Au-Ag mine, Waihi, New Zealand. Heterogeneous ore deposits, like Martha, require a large number of wall rock samples to accurately define mineral distributions. X-ray diffraction analyses of 125 wall rock samples identified the most abundant minerals in the wall rocks as quartz, adularia, albite, illite, chlorite, kaolinite, pyrite and calcite. Distribution maps of these minerals defined 8 relatively homogenous areas of wall rock referred to as 'mineral associations': weakly-altered, propylitic, fresh-argillic, weathered-argillic, oxidized, potassic, quartz veins, and post-mineralization deposits. X-ray fluorescence, Leco furnace, and neutron activation analyses of 46 representative samples produced the geochemical dataset used to assign quantities of elements to observed minerals, and to calculate average mineral concentrations in each association. Thin-section petrography and calcite concentrations from Sobek acid-digestions confirm the calculated mineralogy, providing validation for the method. Calcite and pyrite concentrations allowed advanced acid-base accounting for each mineral association, identifying 3 potential acid-producing associations and one potential acid-neutralizing association. The results target areas, where detailed hydrologic and kinetic tests would be valuable in the next stage of pit lake evaluation. Detailed understanding of wall rock mineralogy will help strengthen predictions of pit lake water quality

  1. A mineral quantification method for wall rocks at open pit mines, and application to the Martha Au-Ag mine, Waihi, New Zealand

    Energy Technology Data Exchange (ETDEWEB)

    Castendyk, Devin N. [Environmental Science, SGES, University of Auckland, Tamaki Campus, Private Bag 92019, Auckland (New Zealand)]. E-mail: d.castendyk@auckland.ac.nz; Mauk, Jeffrey L. [Geology Department, University of Auckland, Private Bag 92019, Auckland (New Zealand); Webster, Jenny G. [Environmental Science, SGES, University of Auckland, Tamaki Campus, Private Bag 92019, Auckland (New Zealand)

    2005-01-01

    Pit lakes that result from open pit mining are potential water resources or potential environmental problems, depending on lake water quality. Wall rock mineralogy can affect lake chemistry if surface water inputs and/or groundwater inputs and/or lake water in contact with submerged wall rocks react with the wall rock minerals. This study presents a mineral quantification method to measure the distribution and concentration of wall rock minerals in open pit mines, and applies the method to the Martha epithermal Au-Ag mine, Waihi, New Zealand. Heterogeneous ore deposits, like Martha, require a large number of wall rock samples to accurately define mineral distributions. X-ray diffraction analyses of 125 wall rock samples identified the most abundant minerals in the wall rocks as quartz, adularia, albite, illite, chlorite, kaolinite, pyrite and calcite. Distribution maps of these minerals defined 8 relatively homogenous areas of wall rock referred to as 'mineral associations': weakly-altered, propylitic, fresh-argillic, weathered-argillic, oxidized, potassic, quartz veins, and post-mineralization deposits. X-ray fluorescence, Leco furnace, and neutron activation analyses of 46 representative samples produced the geochemical dataset used to assign quantities of elements to observed minerals, and to calculate average mineral concentrations in each association. Thin-section petrography and calcite concentrations from Sobek acid-digestions confirm the calculated mineralogy, providing validation for the method. Calcite and pyrite concentrations allowed advanced acid-base accounting for each mineral association, identifying 3 potential acid-producing associations and one potential acid-neutralizing association. The results target areas, where detailed hydrologic and kinetic tests would be valuable in the next stage of pit lake evaluation. Detailed understanding of wall rock mineralogy will help strengthen predictions of pit lake water quality.

  2. Cluster-to-cluster transformation among Au6, Au8 and Au11 nanoclusters.

    Science.gov (United States)

    Ren, Xiuqing; Fu, Junhong; Lin, Xinzhang; Fu, Xuemei; Yan, Jinghui; Wu, Ren'an; Liu, Chao; Huang, Jiahui

    2018-05-22

    We present the cluster-to-cluster transformations among three gold nanoclusters, [Au6(dppp)4]2+ (Au6), [Au8(dppp)4Cl2]2+ (Au8) and [Au11(dppp)5]3+ (Au11). The conversion process follows a rule that states that the transformation of a small cluster to a large cluster is achieved through an oxidation process with an oxidizing agent (H2O2) or with heating, while the conversion of a large cluster to a small one occurs through a reduction process with a reducing agent (NaBH4). All the reactions were monitored using UV-Vis spectroscopy and ESI-MS. This work may provide an alternative approach to the synthesis of novel gold nanoclusters and a further understanding of the structural transformation relationship of gold nanoclusters.

  3. Fe{sub 3}O{sub 4}@SiO{sub 2}–SO{sub 3}H@PPy@Au spheres: Fabrication, characterization and application in SERS

    Energy Technology Data Exchange (ETDEWEB)

    Ren, Guohong; Shang, Mengying; Zou, Hanzhi; Wang, Wenqin, E-mail: wangwenqin@nbu.edu.cn

    2016-04-15

    In this work, the sulfonic acid (–SO{sub 3}H) group terminated Fe{sub 3}O{sub 4}@SiO{sub 2} magnetic spheres were prepared. Polypyrrole (PPy) was in-situ polymerized on Fe{sub 3}O{sub 4}@SiO{sub 2}–SO{sub 3}H spheres due to the dual roles of the –SO{sub 3}H groups: acting as both “anchoring sites” for adsorbing of pyrrole monomer and dopant agent in PPy. By adsorbing gold nanoseeds on the as-prepared Fe{sub 3}O{sub 4}@SiO{sub 2}–SO{sub 3}H@PPy spheres followed the seed-mediated growth method, the multifunctional Fe{sub 3}O{sub 4}@SiO{sub 2}–SO{sub 3}H@PPy@Au spheres were obtained. The application of Fe{sub 3}O{sub 4}@SiO{sub 2}–SO{sub 3}H@PPy@Au spheres in surface-enhanced Raman scattering (SERS) was investigated, and the results exhibited the enhancement in the order of 10{sup 4} using 4-aminothiophenol as the probe molecule. - Highlights: • The sulfonic acid-terminated Fe{sub 3}O{sub 4}@SiO{sub 2} (Fe{sub 3}O{sub 4}@SiO{sub 2}–SO{sub 3}H) spheres were prepared. • The –SO{sub 3}H groups of Fe{sub 3}O{sub 4}@SiO{sub 2}–SO{sub 3}H spheres played dual roles in adsorbing pyrrole and protonating polypyrrole. • Fe{sub 3}O{sub 4}@SiO{sub 2}–SO{sub 3}H@PPy core/gold shell composites can act as SERS substrate for detecting 4-ATP molecule.

  4. LA DIVERSITÃ DÃPLOYÃE AU SEIN DE LâUNIVERSITÃ DâENTREPRISE : LâAPPLICATION CONCRÃTE DâUNE VALEUR ADOPTÃE PAR LA DIRECTION GÃNÃRALE

    Directory of Open Access Journals (Sweden)

    Virginia Drummond-Guitel

    2009-09-01

    Full Text Available La diversité devenue une valeur incontournable adoptée par les grands groupes, encore faut-t-il trouver les moyens concrets pour lâintégrer dans les pratiques des ressources humaines et dans les mentalités des personnes. Le présent papier a pour but de montrer comment les valeurs de la diversité adoptées par la direction générale ont été déclinées et appliquées dans un processus de sélection de candidats pour une formation continue au sein dâune grande organisation internationale. A travers lâapplication dâune méthode qualitative de recherche, 10 (dix dirigeants ayant conçu la formation et 42 (quarante-deux managers ayant suivi le programme confirment lâatteinte du but stratégique de cette formation, autrement dit, lâatteinte dâune vision partagée (SENGE, 1991, à travers la consolidation dâun fort sentiment dâappartenance à la culture organisationnelle (SCHEIN, 1995. Les managers ont été sélectionnés selon leurs différentes professions, cultures nationales et différents secteurs dâactivités, confirmant ainsi une promotion de la diversité au sein de lâorganisation.

  5. Linear response at the 4-component relativistic density-functional level: application to the frequency-dependent dipole polarizability of Hg, AuH and PtH2

    International Nuclear Information System (INIS)

    Salek, Pawel; Helgaker, Trygve; Saue, Trond

    2005-01-01

    We report the implementation and application of linear response density-functional theory (DFT) based on the 4-component relativistic Dirac-Coulomb Hamiltonian. The theory is cast in the language of second quantization and is based on the quasienergy formalism (Floquet theory), replacing the initial state dependence of the Runge-Gross theorem by periodic boundary conditions. Contradictions in causality and symmetry of the time arguments are thereby avoided and the exchange-correlation potential and kernel can be expressed as functional derivatives of the quasienergy. We critically review the derivation of the quasienergy analogues of the Hohenberg-Kohn theorem and the Kohn-Sham formalism and discuss the nature of the quasienergy exchange-correlation functional. Structure is imposed on the response equations in terms of Hermiticity and time-reversal symmetry. It is observed that functionals of spin and current densities, corresponding to time-antisymmetric operators, contribute to frequency-dependent and not static electric properties. Physically, this follows from the fact that only a time-dependent electric field creates a magnetic field. It is furthermore observed that hybrid functionals enhance spin polarization since only exact exchange contributes to anti-Hermitian trial vectors. We apply 4-component relativistic linear response DFT to the calculation of the frequency-dependent polarizability of the isoelectronic series Hg, AuH and PtH 2 . Unlike for the molecules, the effect of electron correlation on the polarizability of the mercury atom is very large, about 25%. We observe a remarkable performance of the local-density approximation (LDA) functional in reproducing the experimental frequency-dependent polarizability of this atom, clearly superior to that of the BLYP and B3LYP functionals. This allows us to extract Cauchy moments (S(-4) = 382.82 and S(-6) = 6090.89 a.u.) that we believe are superior to experiment since we go to higher order in the Cauchy

  6. Charged particle density distributions in Au + Au collisions at ...

    Indian Academy of Sciences (India)

    Charged particle pseudorapidity distributions have been measured in Au + Au collisions using the BRAHMS detector at RHIC. The results are presented as a function of the collision centrality and the center of mass energy. They are compared to the predictions of different parton scattering models and the important role of ...

  7. Enhanced middle-infrared light transmission through Au/SiO(x)N(y)/Au aperture arrays.

    Science.gov (United States)

    Xiao, Gongli; Yao, Xiang; Ji, Xinming; Zhou, Jia; Bao, Zongming; Huang, Yiping

    2011-12-01

    The enhanced middle-infrared light transmission through Au/SiO(x)N(y)/Au aperture arrays by changing the refractive index and the thickness of a dielectric layer was studied experimentally. The results indicated that the transmission spectra was highly dependent on the refractive index and the thickness of SiO(x)N(y). We found that the transmission peaks redshifted regularly along with the refractive index from 1.6 to 1.8, owing to the role of surface plasmon polaritons (SPP) coupling in the Au/SiO(x)N(y)/Au cascaded metallic structure. Simultaneously, a higher transmission efficiency and narrower transmission peak was obtained in Au/SiO2.1N0.3/Au cascaded metallic structure with small refractive index (1.6) than in Au/SiO0.6N1/Au cascaded metallic structure with large refractive index (1.8). When the thickness of SiO(x)N(y) changes from 0.2 to 0.4 microm, the shape of transmission spectra exhibits a large change. It was found that a higher transmission efficiency and narrower transmission peak was obtained in Au/SiO(x)N(y)/Au cascaded metallic structure with a thin dielectric film (0.2 microm), with the increase of SiO(x)N(y) film's thickness, the transmission peak gradually widened and disappeared finally. This effect is useful in applications of biochemical sensing and tunable integrated plasmonic devices in the middle-infrared region.

  8. Synthesis; characterization; and growth mechanism of Au/CdS heterostructured nanoflowers constructed with nanorods

    International Nuclear Information System (INIS)

    Kong Qingcheng; Wu Rong; Feng Xiumei; Ye Cui; Hu Guanqi; Hu Jianqiang; Chen Zhiwu

    2011-01-01

    Research highlights: → Well-defined and flower-shaped Au/CdS heterostructured nanocrystals were for the first time synthesized. → The Au-nanorod-induced hydrothermal strategy was for the first time used to fabricate metal/semiconductor heterostructured nanomaterials. → A preliminary crystal growing mechanism was also proposed for better understanding the growth process of other Au/semiconductor heterostructure nanocrystals. → The route devised here should also be extendable to fabricate other Au/semiconductor heterostructure nanomaterials. - Abstract: Gold/sulfide cadmium (Au/CdS) heterostructured nanocrystals with a flower-like shape were for the first time synthesized through an Au-nanorod-induced hydrothermal method. The Au/CdS nanoflowers possessed the average size of about 350 nm while the nanorods constructing the nanoflowers had the average diameter, length, and aspect ratio of approximately 50 nm, 100 nm, and 2, respectively. Our method suggested that Au-nanorods played a decisive role in the formation of Au/CdS heterostructured nanoflowers, demonstrated by high-resolution transmission electron microscopy (HRTEM), electron diffraction (ED), energy-dispersive X-ray spectroscopy (EDS), and UV-visible absorption spectroscopy measurements. A preliminary experiment model to reveal the Au/CdS growth mechanism was also put forward. The route devised here should be perhaps extendable to fabricate other Au/semiconductor heterostructured nanomaterials, and the Au/CdS nanoflowers may have potential applications in nanodevices, biolabels, and clinical detection and diagnosis.

  9. Developing an aqueous approach for synthesizing Au and M@Au (M = Pd, CuPt) hybrid nanostars with plasmonic properties

    OpenAIRE

    Du, Jingshan; Yu, Junjie; Xiong, Yalin; Lin, Zhuoqing; Zhang, Hui; Yang, Deren

    2014-01-01

    Anisotropic Au nanoparticles show unique localized surface plasmon resonance (LSPR) properties, which make it attractive in optical, sensing, and biomedical applications. In this contribution, we report a general and facile strategy towards aqueous synthesis of Au and M@Au (M = Pd, CuPt) hybrid nanostars by reducing HAuCl4 with ethanolamine in the presence of cetyltrimethylammonium bromide (CTAB). According to electron microscopic observation and spectral monitoring, we found that the layered...

  10. Stabilizing ultrasmall Au clusters for enhanced photoredox catalysis.

    Science.gov (United States)

    Weng, Bo; Lu, Kang-Qiang; Tang, Zichao; Chen, Hao Ming; Xu, Yi-Jun

    2018-04-18

    Recently, loading ligand-protected gold (Au) clusters as visible light photosensitizers onto various supports for photoredox catalysis has attracted considerable attention. However, the efficient control of long-term photostability of Au clusters on the metal-support interface remains challenging. Herein, we report a simple and efficient method for enhancing the photostability of glutathione-protected Au clusters (Au GSH clusters) loaded on the surface of SiO 2 sphere by utilizing multifunctional branched poly-ethylenimine (BPEI) as a surface charge modifying, reducing and stabilizing agent. The sequential coating of thickness controlled TiO 2 shells can further significantly improve the photocatalytic efficiency, while such structurally designed core-shell SiO 2 -Au GSH clusters-BPEI@TiO 2 composites maintain high photostability during longtime light illumination conditions. This joint strategy via interfacial modification and composition engineering provides a facile guideline for stabilizing ultrasmall Au clusters and rational design of Au clusters-based composites with improved activity toward targeting applications in photoredox catalysis.

  11. Une méthode pour estimer l’interception du rayonnement par un couvert bas : application au colza avant montaison

    Directory of Open Access Journals (Sweden)

    Denoroy Pascal

    2002-01-01

    introduire dans l’équation 2 un paramètre représentant le taux de couverture du sol. Si l’estimation par mesure directe de epsiloni et donc l’estimation de k sont assez simples, au moins dans le principe pour un couvert développé en hauteur (colza après montaison [3], une telle mesure devient beaucoup plus complexe dans le cas d’un couvert discontinu et bas. Dans ce milieu hétérogène (et souvent dans des conditions hivernales sévères, une distribution représentative des capteurs de rayonnement est difficile, les risques de perturbation de la mesure (salissure des capteurs, déréglages sont élevés. Plusieurs études ont déjà traité de epsiloni et k dans le cas du colza [3-7]. Elles sont fondées sur des mesures d’interception du rayonnement et concernent des couverts fermés, après montaison. Une autre approche consiste à effectuer un calcul précis de PARi avec des modèles détaillés utilisant une description complète des paramètres (géométriques et radiatifs du feuillage, et du rayonnement incident [8]. Mais les données nécessaires sont alors nombreuses, complexes à obtenir et donc généralement non disponibles en expérimentation. Pour répondre aux besoins de calcul de l’interception du rayonnement dans les phases d’installation du colza, cet article présente une méthode permettant de calculer epsiloni en tenant compte des principales caractéristiques de la morphologie du couvert et du régime radiatif auquel ce dernier est soumis. Les données nécessaires sont limitées : l’indice foliaire, les taux de couverture du sol (deux définitions, la latitude du lieu considéré, la date et le rayonnement incident quotidien. Ce calcul permet une estimation du coefficient moyen d’extinction k (équation 2. On verra que k peut être corrélé à l’IF, la période de l’année et la latitude du lieu, ce qui permet de proposer une estimation simple de k et donc un calcul simplifié de epsiloni, adapté au cas des faibles IF

  12. Strain Distribution of Au and Ag Nanoparticles Embedded in Al2O3 Thin Film

    Directory of Open Access Journals (Sweden)

    Honghua Huang

    2014-01-01

    Full Text Available Au and Ag nanoparticles embedded in amorphous Al2O3 matrix are fabricated by the pulsed laser deposition (PLD method and rapid thermal annealing (RTA technique, which are confirmed by the experimental high-resolution transmission electron microscope (HRTEM results, respectively. The strain distribution of Au and Ag nanoparticles embedded in the Al2O3 matrix is investigated by the finite-element (FE calculations. The simulation results clearly indicate that both the Au and Ag nanoparticles incur compressive strain by the Al2O3 matrix. However, the compressive strain existing on the Au nanoparticle is much weaker than that on the Ag nanoparticle. This phenomenon can be attributed to the reason that Young’s modulus of Au is larger than that of Ag. This different strain distribution of Au and Ag nanoparticles in the same host matrix may have a significant influence on the technological potential applications of the Au-Ag alloy nanoparticles.

  13. Colloidal Au and Au-alloy catalysts for direct borohydride fuel cells: Electrocatalysis and fuel cell performance

    Science.gov (United States)

    Atwan, Mohammed H.; Macdonald, Charles L. B.; Northwood, Derek O.; Gyenge, Elod L.

    Supported colloidal Au and Au-alloys (Au-Pt and Au-Pd, 1:1 atomic ratio) on Vulcan XC-72 (with 20 wt% metal load) were prepared by the Bönneman method. The electrocatalytic activity of the colloidal metals with respect to borohydride electro-oxidation for fuel cell applications was investigated by voltammetry on static and rotating electrodes, chronoamperometry, chronopotentiometry and fuel cell experiments. The fundamental electrochemical techniques showed that alloying Au, a metal that leads to the maximum eight-electron oxidation of BH 4 -, with Pd or Pt, well-known catalysts of dehydrogenation reactions, improved the electrode kinetics of BH 4 - oxidation. Fuel cell experiments corroborated the kinetic studies. Using 5 mg cm -2 colloidal metal load on the anode, it was found that Au-Pt was the most active catalyst giving a cell voltage of 0.47 V at 100 mA cm -2 and 333 K, while under identical conditions the cell voltage using colloidal Au was 0.17 V.

  14. Colloidal Au and Au-alloy catalysts for direct borohydride fuel cells: Electrocatalysis and fuel cell performance

    Energy Technology Data Exchange (ETDEWEB)

    Atwan, Mohammed H.; Northwood, Derek O. [Department of Mechanical, Auto and Materials Engineering, University of Windsor, Windsor (Canada N9B 3P4); Macdonald, Charles L.B. [Department of Chemistry and Biochemistry, University of Windsor, Windsor (Canada N9B 3P4); Gyenge, Elod L. [Department of Chemical and Biological Engineering, The University of British Columbia, Vancouver, BC (Canada V6T 1Z4)

    2006-07-14

    Supported colloidal Au and Au-alloys (Au-Pt and Au-Pd, 1:1 atomic ratio) on Vulcan XC-72 (with 20wt% metal load) were prepared by the Bonneman method. The electrocatalytic activity of the colloidal metals with respect to borohydride electro-oxidation for fuel cell applications was investigated by voltammetry on static and rotating electrodes, chronoamperometry, chronopotentiometry and fuel cell experiments. The fundamental electrochemical techniques showed that alloying Au, a metal that leads to the maximum eight-electron oxidation of BH{sub 4}{sup -}, with Pd or Pt, well-known catalysts of dehydrogenation reactions, improved the electrode kinetics of BH{sub 4}{sup -} oxidation. Fuel cell experiments corroborated the kinetic studies. Using 5mgcm{sup -2} colloidal metal load on the anode, it was found that Au-Pt was the most active catalyst giving a cell voltage of 0.47V at 100mAcm{sup -2} and 333K, while under identical conditions the cell voltage using colloidal Au was 0.17V. (author)

  15. Etude de la cristallisation du bicarbonate de sodium raffiné:contribution au modèle des colonnes à bulles

    OpenAIRE

    Gutierrez, Vanessa

    2010-01-01

    La société Solvay est le plus grand producteur de bicarbonate de sodium raffiné au monde. Le NaHCO3 est un des produits parmi les plus connus et utilisés. Sa production a lieu dans des colonnes à bulles de volumes très importants. La production du bicarbonate de sodium raffiné dans ces réacteurs peut se résumer par la réaction entre une solution saturée de carbonate de sodium (Na2CO3) et le CO2(gaz) Cette production implique la connaissance et le contrôle des réacteurs de type triphasique. E...

  16. Estimation of spin contamination error in dissociative adsorption of Au2 onto MgO(0 0 1) surface: First application of approximate spin projection (AP) method to plane wave basis

    Science.gov (United States)

    Tada, Kohei; Koga, Hiroaki; Okumura, Mitsutaka; Tanaka, Shingo

    2018-06-01

    Spin contamination error in the total energy of the Au2/MgO system was estimated using the density functional theory/plane-wave scheme and approximate spin projection methods. This is the first investigation in which the errors in chemical phenomena on a periodic surface are estimated. The spin contamination error of the system was 0.06 eV. This value is smaller than that of the dissociation of Au2 in the gas phase (0.10 eV). This is because of the destabilization of the singlet spin state due to the weakening of the Au-Au interaction caused by the Au-MgO interaction.

  17. Etude d'un procédé d'hydroliquéfaction du charbon pour la production simultanée de gaz et de carburant . . . . . Studies of a Coal Hydrogenation Process to Produce CO-Currently Gas and Gasoline

    Directory of Open Access Journals (Sweden)

    Franckowiak S.

    2006-11-01

    Full Text Available Un des principaux moyens de réintroduire le charbon dans le marché énergétique français est de le transformer en produits utiles comme le gaz de réseau ou les carburants. Les procédés d'oxyvapogazéification permettent d'obtenir un gaz de synthèse qui peut être ensuite converti en gaz riche ou en produits liquides. L'hydrogénation en phase liquide (ou hydroliquéfaction se présente pour le long terme comme une seconde voie qui offre des avantages spécifiques - taux de conversion du charbon et rendement élevés, - production directe de gaz de substitution (GNS et de carburant, - possibilité d'utilisation d'hydrogène provenant de l'électricité nucléaire. Un programme d'étude a été lancé avec la participation du Gaz de France (GDF, du Centre d'études et de recherches des Charbonnages de France (Cerchar, de l'institut Français du Pétrole (lFP et du Centre National de la Recherche Scientifique (CNRS dans le cadre du Groupe d'Étude de la Conversion du Charbon par Hydrogénation (GECH. Un banc d'essai d'hydroliquéfaction situé au Cerchar, d'un débit de 10 kg/h de mélange charbon-solvant, permet d'obtenir des hydrogénats dans des conditions variées et en présence de divers catalyseurs. L'étude de la valorisation de ces hydrogénats est effectuée dans les laboratoires de l'lFP. Les essais et les études effectués permettent d'envisager la production à volonté du GNS, de carburants ou des deux ensemble. Un modèle d'optimisation a été réalisé au GDF pour étudier et comparer les différentes filières en prenant en compte l'utilisation d'hydrogène d'électrolyse ou d'hydrogène produit sur place à partir du résidu de liquéfaction. One of the main ways to bring coal in the future french energy market is to transform it into valuable products. The oxygen steam gasification processes give a synthesis gas which can be converted into SNG or gasoline in a catalytic stage. The liquid phase hydrogenation process is a

  18. Computer processing of {gamma} spectra. Application to the dosage of mixed natural or artificial radioelements; Traitement par ordinateur des spectres {gamma}. Application au dosage de melanges de radioelements naturels ou artificiels

    Energy Technology Data Exchange (ETDEWEB)

    Coulomb, R; Goldsztein, M; Schiltz, J C [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1965-07-01

    A program, written in Fortran II for IBM 7034 II, permitting resolution by means of least squares of a mixture of natural or artificial radioelements, is described. The spectra are processed in measurement batches, making up a homogeneous study, which comprise standards and samples. This highly versatile program may either ensure the processing of a great number of daily analyses, or be used pending development of radiochemical methods. The feeding of data has been simplified as much as possible. On the contrary, at the outlet, the numerical or graphical controls, error computations, and the printing of results in clear and legible form have been multiplied. In spite of this, the calculation times are exceedingly short. Several independent studies which include about sixty spectra may be processed in less than five minutes. (authors) [French] On decrit un programme, redige en Fortran H, pour IBM 7094 H, permettant la resolution par les moindres carres d'un melange de radioelements naturels ou artificiels. Les spectres sont traites par groupe de mesures, constituant une etude homogene, comprenant etalons et echantillons. Ce programme, extremement souple, peut, soit repondre a une production journaliere importante d'analyses, soit etre utilise en periode de mise au point de methodes radiochimiques. L'introduction des donnees a ete simplifiee au maximum. Au contraire, a la 'sortie', on a multiplie les controles numeriques ou graphiques, les calculs d'erreur, les impressions de resultats sous une forme aussi claire et lisible que possible. Malgre cela, les temps de calculs sont extremement brefs, plusieurs etudes independantes comportant une soixantaine de spectres peuvent etre traitees en moins de 5 minutes. (auteurs)

  19. Study of total ionization by {alpha} particles, in pure gases and gaseous mixtures containing metastable atoms, as a function of temperature; Etude de l'ionisation totale par les paricules {alpha}, dans les gaz purs et les melanges gazeux contenant des atomes metastables, en fonction de la temperature

    Energy Technology Data Exchange (ETDEWEB)

    Bristeau, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    A - B contenant des atomes metastables A{sup *} et une 'impurete' B. On etudie systematiquement la variation {delta}W de W en fonction de la temperature et de la concentration de 'l'impurete' B dans les melanges Ne - Ar, Ne - Kr, Ne - H{sub 2}, Ne - N{sub 2}, Ne - CH{sub 4} et He - Ar. On realise des experiences sur un melange gazeux ternaire du type A - B - C, ou C est une deuxieme 'impurete' ionisable que l'on ajoute au melange binaire A - B, demontrant l'existence d'atomes excites B{sup *} de 'l'impurete' B. Enfin, on montre que la quantite d'atomes metastables formes dans un gaz pur, doit etre tres proche du nombre N{sub 0} de paires d'ions et qu'il doit y avoir correlation entre lenombre N{sub 0} de paires d'ions et le nombre {approx_equal} N{sub 0} d'atomes metastables crees dans les gaz rares purs. (auteur)

  20. Controlled electrodeposition of Au monolayer film on ionic liquid

    Energy Technology Data Exchange (ETDEWEB)

    Ma, Qiang; Pang, Liuqing; Li, Man; Zhang, Yunxia; Ren, Xianpei [Key Laboratory of Applied Surface and Colloid Chemistry, National Ministry of Education, Shaanxi Engineering Lab for Advanced Energy Technology, School of Materials Science and Engineering, Shaanxi Normal University, Xi’an 710062 (China); Liu, Shengzhong Frank, E-mail: szliu@dicp.ac.cn [Key Laboratory of Applied Surface and Colloid Chemistry, National Ministry of Education, Shaanxi Engineering Lab for Advanced Energy Technology, School of Materials Science and Engineering, Shaanxi Normal University, Xi’an 710062 (China); Dalian Institute of Chemical Physics, Dalian National Laboratory for Clean Energy, Chinese Academy of Sciences, Dalian 116023 (China)

    2016-05-15

    Highlights: • We fabricate Au monolayer film on Ionic liquid substrate using an electrochemical deposition technique. • Au monolayer film was deposited on a “soft substrate” for the first time. • Au monolayer film can contribute extra Raman enhancement. - Abstract: Gold (Au) nanoparticles have been attractive for centuries for their vibrant appearance enhanced by their interaction with sunlight. Nowadays, there have been tremendous research efforts to develop them for high-tech applications including therapeutic agents, sensors, organic photovoltaics, medical applications, electronics and catalysis. However, there remains to be a challenge to fabricate a monolayer Au coating with complete coverage in controlled fashion. Here we present a facile method to deposit a uniform Au monolayer (ML) film on the [BMIM][PF{sub 6}] ionic liquid substrate using an electrochemical deposition process. It demonstrates that it is feasible to prepare a solid phase coating on the liquid-based substrate. Moreover, the thickness of the monolayer coating can be controlled to a layer-by-layer accuracy.

  1. Properties of transparent and conductive Al:ZnO/Au/Al:ZnO multilayers on flexible PET substrates

    International Nuclear Information System (INIS)

    Dimopoulos, T.; Bauch, M.; Wibowo, R.A.; Bansal, N.; Hamid, R.; Auer, M.; Jäger, M.; List-Kratochvil, E.J.W.

    2015-01-01

    Highlights: • Transparent, low resistive AZO/Au/AZO layers were sputtered on PET substrates. • AZO/Au/AZO has higher figure of merit than ITO for specific Au thicknesses. • The resistance of AZO/Au/AZO is stable against repetitive substrate bending. • AZO/Au/AZO electrode performance is comparable to ITO in light emitting diodes. - Abstract: We investigate the structural, electrical and optical properties of transparent electrodes, consisting of Al-doped ZnO (AZO) and ultrathin Au layers, sputtered on polyethylene terephthalate (PET). These electrodes are relevant for optoelectronic devices and thin film photovoltaics. When deposited on AZO, Au films as thin as 3 nm form electrically conductive, meandering structures, whereas uniform Au films are obtained from a thickness of 5 nm. The sheet resistance decreases with Au thickness, reaching 7 Ω for 11 nm-thick Au. AZO/Au/AZO trilayers combine lowest resistance with highest transparency, while their resistance stability against bending fatigue is superior to the Sn-doped In 2 O 3 (ITO) electrode. The figure of merit of AZO/Au/AZO is larger than of ITO for Au thickness equal to or larger than 9 nm. To demonstrate the applicability of the AZO/Au/AZO transparent electrode, simple organic light emitting diodes were fabricated and tested in comparison to PET/ITO standard substrates

  2. Properties of transparent and conductive Al:ZnO/Au/Al:ZnO multilayers on flexible PET substrates

    Energy Technology Data Exchange (ETDEWEB)

    Dimopoulos, T., E-mail: theodoros.dimopoulos@ait.ac.at [AIT-Austrian Institute of Technology, Energy Department, Photovoltaic Systems, Giefinggasse 2, 1210, Vienna (Austria); Bauch, M.; Wibowo, R.A.; Bansal, N. [AIT-Austrian Institute of Technology, Energy Department, Photovoltaic Systems, Giefinggasse 2, 1210, Vienna (Austria); Hamid, R. [AIT-Austrian Institute of Technology, Mobility Department, Electric Drive Technologies, Giefinggasse 2, 1210, Vienna (Austria); Auer, M.; Jäger, M. [NanoTecCenter Weiz Forschungsgesellschaft mbH, Franz-Pichler Straße 32, A-8160 Weiz (Austria); List-Kratochvil, E.J.W. [NanoTecCenter Weiz Forschungsgesellschaft mbH, Franz-Pichler Straße 32, A-8160 Weiz (Austria); Institute of Solid State Physics, Graz University of Technology, Petersgasse 16, A-8010 Graz (Austria)

    2015-10-15

    Highlights: • Transparent, low resistive AZO/Au/AZO layers were sputtered on PET substrates. • AZO/Au/AZO has higher figure of merit than ITO for specific Au thicknesses. • The resistance of AZO/Au/AZO is stable against repetitive substrate bending. • AZO/Au/AZO electrode performance is comparable to ITO in light emitting diodes. - Abstract: We investigate the structural, electrical and optical properties of transparent electrodes, consisting of Al-doped ZnO (AZO) and ultrathin Au layers, sputtered on polyethylene terephthalate (PET). These electrodes are relevant for optoelectronic devices and thin film photovoltaics. When deposited on AZO, Au films as thin as 3 nm form electrically conductive, meandering structures, whereas uniform Au films are obtained from a thickness of 5 nm. The sheet resistance decreases with Au thickness, reaching 7 Ω for 11 nm-thick Au. AZO/Au/AZO trilayers combine lowest resistance with highest transparency, while their resistance stability against bending fatigue is superior to the Sn-doped In{sub 2}O{sub 3} (ITO) electrode. The figure of merit of AZO/Au/AZO is larger than of ITO for Au thickness equal to or larger than 9 nm. To demonstrate the applicability of the AZO/Au/AZO transparent electrode, simple organic light emitting diodes were fabricated and tested in comparison to PET/ITO standard substrates.

  3. Synthesis of Au@Pt bimetallic nanoparticles with concave Au nanocuboids as seeds and their enhanced electrocatalytic properties in the ethanol oxidation reaction

    Science.gov (United States)

    Tan, Lingyu; Li, Lidong; Peng, Yi; Guo, Lin

    2015-12-01

    Herein, a new type of uniform and well-structured Au@Pt bimetallic nanoparticles (BNPs) with highly active concave Au nanocuboids (NCs) as seeds was successfully synthesized by using the classic seed-mediated method. Electrochemical measurements were conducted to demonstrate their greatly enhanced catalytic performance in the ethanol oxidation reaction (EOR). It was found that the electrochemical performance for Au@Pt BNPs with the concave Au NCs as seeds, which were enclosed by {611} high-index facets, could be seven times higher than that of the Au@Pt bimetallic nanoparticles with regular spherical Au NPs as seeds. Furthermore, our findings show that the morphology and electrocatalytic activity of the Au@Pt BNPs can be tuned simply by changing the compositional ratios of the growth solution. The lower the amount of H2PtCl6 used in the growth solution, the thinner the Pt shell grew, and the more high-index facets of concave Au NCs seeds were exposed in Au@Pt BNPs, leading to higher electrochemical activity. These as-prepared concave Au@Pt BNPs will open up new strategies for improving catalytic efficiency and reducing the use of the expensive and scarce resource of platinum in the ethanol oxidation reaction, and are potentially applicable as electrochemical catalysts for direct ethanol fuel cells.

  4. Synthesis of Au@Pt bimetallic nanoparticles with concave Au nanocuboids as seeds and their enhanced electrocatalytic properties in the ethanol oxidation reaction

    International Nuclear Information System (INIS)

    Tan, Lingyu; Li, Lidong; Peng, Yi; Guo, Lin

    2015-01-01

    Herein, a new type of uniform and well-structured Au@Pt bimetallic nanoparticles (BNPs) with highly active concave Au nanocuboids (NCs) as seeds was successfully synthesized by using the classic seed-mediated method. Electrochemical measurements were conducted to demonstrate their greatly enhanced catalytic performance in the ethanol oxidation reaction (EOR). It was found that the electrochemical performance for Au@Pt BNPs with the concave Au NCs as seeds, which were enclosed by {611}high-index facets, could be seven times higher than that of the Au@Pt bimetallic nanoparticles with regular spherical Au NPs as seeds. Furthermore, our findings show that the morphology and electrocatalytic activity of the Au@Pt BNPs can be tuned simply by changing the compositional ratios of the growth solution. The lower the amount of H_2PtCl_6 used in the growth solution, the thinner the Pt shell grew, and the more high-index facets of concave Au NCs seeds were exposed in Au@Pt BNPs, leading to higher electrochemical activity. These as-prepared concave Au@Pt BNPs will open up new strategies for improving catalytic efficiency and reducing the use of the expensive and scarce resource of platinum in the ethanol oxidation reaction, and are potentially applicable as electrochemical catalysts for direct ethanol fuel cells. (paper)

  5. GESTION DES FLUX ÉNERGÉTIQUE DANS UN SYSTÈME PHOTOVOLTAÏQUE AVEC STOCKAGE CONNECTER AU RÉSEAU – Application à l'habitat

    OpenAIRE

    Riffonneau , Yann

    2009-01-01

    The work done during this thesis contributes to the intensive penetration of the photovoltaic electricity production into the electric grid. Photovoltaic energy holds an immense potential, in particular in the housing sector, but intermittent nature limits its large scale development. In this thesis, we propose to add a storage element to the grid connected photovoltaic system (housing application). First, we introduce the notion of energy management in these systems called « hybrids systems ...

  6. Commande de systèmes linéaires sous contraintes fréquentielles et temporelles – Application au lanceur flexible

    OpenAIRE

    Chambon , Emmanuel

    2016-01-01

    In modern control design problems, both frequency- and time-domain requirements are usually considered such that the resulting control law satisfies the specifications. Novel non-smooth optimisation techniques can be used to achieve multiple frequency-domain specifications over a family of linear models. Examples of applications include robust control design where multiple critical models for different values of the uncertain parameters are considered. This is illustrated in this thesis manus...

  7. Multifragmentation in Au + Au collisions studied with AMD-V

    Energy Technology Data Exchange (ETDEWEB)

    Ono, Akira [Tohoku Univ., Sendai (Japan). Faculty of Science

    1998-07-01

    AMD-V is an optimum model for calculation of multifragmentation in Au + Au collisions. AMD-V consider anti-symmetry of incident nucleus, target nucleus and fragments, furthermore, it treat the quantum effect to exist many channels in the intermediate and final state. 150 and 250 MeV/nucleon incident energy were used in the experiments. The data of multifragment atom in {sup 197}Au + {sup 197}Au collisions was reproduced by AMD-V calculation using Gognny force, corresponding to the imcompressibility of nuclear substance K = 228 MeV and its mean field depend on momentum. When other interaction (SKG 2 force, corresponding to K = 373 KeV) was used an mean field does not depend on momentum, the calculation results could not reproduce the experimental values, because nucleus and deuteron were estimated too large and {alpha}-particle and intermediate fragments estimated too small. (S.Y.)

  8. Fabrication of Au-Pd Core-shell Nanoparticles using Au Thin-Film Dewetting at High Temperature and Chemical Synthesis Methods

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Min-Gyu; Lee, Hye-Jung; Oh, Yong-Jun [Hanbat National Univ., Daejeon (Korea, Republic of)

    2016-07-15

    Au-Pd bimetallic nanoparticles (NPs) have received a lot of attention in the fields of catalysts and hydrogen sensors. In this study, Au-Pd core-shell NP arrays were successfully fabricated using two steps: formation of the ordered array of Au NPs cores via solid-state dewetting of a Au thin film on a topographic silica substrate, and Pd shell formation via chemical synthesis using two different surfactants (CTAB and CTAC). Using the CTAB surfactant in particular, a 2-D composite structure comprised of an ordered array of Au-Pd NPs, with smaller Pd NPs on the nanoscopic gaps between the Au-Pd NPs, could be formed. This structure is expected to have potential application in resistance-base hydrogen sensors.

  9. Suez-Gaz de France merger, E.ON's public takeover bid on Endesa... The new energy fight

    International Nuclear Information System (INIS)

    Lepetit, V.; Rouaud, P.O.; Mairet, C.

    2006-01-01

    The energy sector is in fever. In less than a week (February 21 to 26, 2006), the Europe of energy has fallen into a frenzy of mergers and acquisitions: the German E.ON offered 29.1 billion euros to get the Spanish Endesa, Electricite de France (EdF), who already got the Italian Edison in 2005, is ready for more major acquisitions, the Italian Enel is candidate for the repurchasing of Suez, while Gaz de France (GdF) and Suez have started a surprise merger. The stake of this match between giants is their growing up and the penetration of foreign markets before their complete liberalization in July 2007. The potential victims of these actions are the competition and the clients, the industrial ones first. (J.S.)

  10. Transverse expansion in 197 Au + 197 Au collisions at RHIC

    International Nuclear Information System (INIS)

    Cheng, Y.; Liu, F.; Liu, K.; Schweda, K.; Xu, N.

    2003-01-01

    Using the RQMD model, transverse momentum distributions and particle ratios are studied for 197 Au + 197 Au collisions at √s NN = 200 GeV. In particular, they present results on the mean transverse momentum of charged pions, charged kaons, protons and anti-protons and compare with experimental measurements. They discuss an approach to study early partonic collectivity in high energy nuclear collisions

  11. Price cap regulation: the case of natural gas transport in the UK; La reglementation par price cap: le cas du transport de gaz naturel au Royaume Uni

    Energy Technology Data Exchange (ETDEWEB)

    David, L. [ATER, Paris-1 Univ., 75 (France)

    1999-09-01

    The transport and storage activities of British Gas company are controlled by a distinct organization named Transco. The access charges paid by the suppliers for the use of Transco's network are regulated by a price cap since October 1, 1994. However, Ofgas, the office of gas supply which is the regulation authority in charge of the control of competition and of British Gas activities, considers this control system as inefficient and has chosen a RPI (retail price index)-X (expected productivity factor)-type price cap for the control of gas transport tariffs. This has led to a disagreement between Transco and Ofgas which has delayed the implementation of the new system up to February 1998. This article compares the choices made by Ofgas for the control of gas transport tariffs with the economical theory. It recalls first, the reasons why the price cap appears as more efficient than the service cost regulation, the alternate method used by regulation authorities to control the tariffs of natural monopolies. Then, the difficulties linked with the implementation of the price cap for the transport of natural gas in the UK are analyzed in order to explain the reasons that led Ofgas to change its formula. Finally, the bases of an optimum hybrid formula are proposed. (J.S.)

  12. Natural gas air-conditioning and the little tertiary: a successful partnership; Climatisation au gaz naturel et petit tertiaire: une alliance reussie

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    This paper presents the market of the natural gas air-conditioning in France: 7% in 2000 for an an objective of 10% in 2002. Many example of installations in France are provided and discussed to present the technology, its cost and the maintenance. (A.L.B.)

  13. Government information report to the parliament. The gas distribution in France; Rapport d'information du gouvernement au parlement. La desserte en gaz du territoire francais

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-11-01

    This report evaluates the gas distribution state in France and presents the forecasts of the gas energy use development by the gas utilities users. In this framework the following points are presented: the juridical aspects of the gas distribution, the national plan of distribution, the new legislation occurring from the gas market deregulation and some statistical data on the gas use, consumption and demand in France. (A.L.B.)

  14. The gas industry in Brazil and the new regulatory framework; L'industrie du gaz au Bresil et le nouveau cadre des reglementations

    Energy Technology Data Exchange (ETDEWEB)

    Schwyter, A.A. [Comgas, Cia. de Gas de Sao Paulo (Brazil)

    2000-07-01

    In the last tem years many things have changes in the economic and political environment in the world, especially in Brazil. The new federal government elected in 1994 has started a new economic program and one of the most important points is to reduce government interference in the economy. For this reason, the Federal Constitution was changed and now private companies can operate in the natural gas upstream and downstream sectors. The aim of this policy is to increase efficiency in the energy sector with more investment and better prices. Brazil is now facing a new challenge, which is to establish a complete regulatory framework for the gas industry, for its development, with private as well as state owned companies. The purpose of this work is to study the main characteristics of the Brazilian natural gas sector and how to set up regulatory issues to service it. The Brazilian Natural Gas Industry has specific characteristics, very different from other countries', even from those in Latin America. It is necessary, in order to more adequately develop the industry: new suppliers, guaranty of supply, definition of open access, definition of concession models, setting the role of the state and federal powers, transportation systems and the development of a gas network, definition of exports and imports, production, safety, product quality and service, principle of tariffs and prices and all those aspects which are not regulated yet. (author)

  15. Integrated natural gas pipeline control and customer service system of Gasum; Le systeme integre de controle des canalisations de gaz et de service au consommateur chez Gasum

    Energy Technology Data Exchange (ETDEWEB)

    Aho, J.; Manty, O.; Ahlnas, B. [Gasul Oy (Finland)

    2000-07-01

    Due to the rapid development of the information technology, ageing is not the only driving force for replacing old computer systems with more sophisticated ones. The Finnish natural Gas company, Gasum Oy, has recently taken into use a new control and monitoring system for natural gas pipeline. A special customer service system, developed by Gasum Oy, is closely connected to monitoring system. It provides up-to-date information to all customers of Gasum Oy. The information is layered in three confidential levels: general information, operational data and invoicing information. The system is operating interactively in confidential Extranet. Inside Gasum Oy to meet the needs of departments outside the control room, a new GID system is developed. GID is a way to present pipeline process data and its further modifications with a very user-friendly interface based on geographical map. The system is based on data warehouse architecture and it is working on company's Intranet. This makes it possible to present various secrecy level information based on user ID. Gasum's new SCADA is not only the base for operating the pipeline, but it also provides lot of vital information to other systems serving different user groups within natural gas business in Finland. (authors)

  16. Poultry farming buildings. Natural gas heating. Guidebook of installation rules; Batiments d`elevage avicole. Chauffage au gaz. Guide des regles d`installation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    The technical and economical performances of a poultry farm are greatly influenced by the mastery of ambient temperature during the first days of husbandry. The natural gas space heating installation must answer these requirements and also respect all safety rules concerning the personnel and the animals. In order to answer the questions of poultry farming professionals, the technical association of the natural gas industry (ATG) in France and the Groupama insurance company have redefined the new version of this brochure which integrates the recent technological advances and defines the minimum quality and safety rules required to achieve a natural gas heating installation. The different topics presented are: the gas supply (aerial fixed reservoirs), the general distribution panel (location, command systems, regulation systems for LPG installations, electrical equipments), the distribution pipes (general supply, indoor pipes, flexible pipes, pipe fittings), the heating systems (power, choice, power supply, fastening, air renewal), the check and sign and the start-up of the installation, the periodical control and maintenance operations. (J.S.)

  17. Development and training for the professional of the gas distribution industry in Brazil; Formation des professionnels de l'industrie de la distribution du gaz au Bresil

    Energy Technology Data Exchange (ETDEWEB)

    Hatsumi Nagato, D. [Workout Energy Business (Brazil)

    2000-07-01

    This work will present a Training and Development model for professionals of the gas distribution industry. Today's there are not schools developing gas related subjects. It's important to give to the future gas man, the knowledge needed to develop their activities. This can be achieved by focusing on criteria based on The Competency Concept and Learning Organization. To develop professional 'competency' we consider this tree of basic points: to know, to know how to do and wish to do ( willing ). We are going to present the 'minimum' 'competences' required for gas distribution companies and the methods used to qualify people for emergent gas industries, considering basically four professionals groups: workers, technicians, engineers and managers. (author)

  18. Measurement of gas permeability through geo-synthetic clay liners; Mesure de la permeabilite au gaz a travers des geosynthetiques bentonitiques

    Energy Technology Data Exchange (ETDEWEB)

    Bouazza, A.; Vangpaisal, T. [Monash University, Melbourne, Victoria (Australia)

    2000-07-01

    While much research has been performed to investigate the ability of GCLs to limit flow through minimization of the saturated hydraulic conductivity, very little is known about their capabilities to control gas flux and therefore reducing gas migration into the atmosphere or the areas surrounding landfills. The aim of this study was to assess gas flow through GCLs with a simple and reliable testing procedure. A gas permeameter was developed to study gas flow through partially saturated geo-synthetic clay liners (GCLs). Measurements of the differential pressure across the GCL sample at varying flow rates were used to calculate gas permeability at different moisture contents. For the range of water content studied (65% < {omega} < 128%) a decrease of around 4 orders of magnitude in the GCL permeability has been observed. This suggests that the GCL degree of hydration during the design life of a waste containment facility is an important issue to address in the design process of a lining or cover system using a GCL. (authors)

  19. Face au risque

    CERN Document Server

    Grosse, Christian; November, Valérie

    2007-01-01

    Ce volume collectif sur le risque inaugure la collection L'ÉQUINOXE. Ancré dans l'histoire pour mesurer les continuités et les ruptures, il illustre la manière dont les sciences humaines évaluent et mesurent les enjeux collectifs du risque sur les plans politiques, scientifiques, énergétiques, juridiques et éthiques. Puisse-t-il nourrir la réflexion sur la culture et la prévention du risque. Ses formes épidémiques, écologiques, sociales, terroristes et militaires nourrissent les peurs actuelles, structurent les projets sécuritaires et constituent - sans doute - les défis majeurs à notre modernité. Dans la foulée de la richesse scientifique d'Equinoxe, L'ÉQUINOXE hérite de son esprit en prenant à son tour le pari de contribuer - non sans risque - à enrichir en Suisse romande et ailleurs le champ éditorial des sciences humaines dont notre société a besoin pour forger ses repères. Après Face au risque suivra cet automne Du sens des Lumières. (MICHEL PORRET Professeur Ordinaire à la F...

  20. Experimental Investigation of the Asphaltene Deposition Process during Different Production Schemes Étude expérimentale du processus de dépôt d’asphaltènes au cours de différents modes de production

    Directory of Open Access Journals (Sweden)

    Bagheri M.B.

    2011-02-01

    Full Text Available This paper presents the results of asphaltene precipitation and deposition during lean gas injection, CO2 injection and natural depletion in reservoir conditions. In addition, the effect of variations in operating pressure, injection gas concentration and production rate on asphaltene precipitation and deposition were investigated. The severity of asphaltene deposition was found to be more pronounced in lean gas injection in comparison with CO2 injection and natural depletion. Increasing the flow rate in natural depletion experiments showed a considerable increase in asphaltene deposition, and consequently permeability reduction in the core matrix. Moreover, more asphaltene deposition was observed along the porous media in the gas injection experiments when the gas mol percent of the mixture was increased. Cet article présente les résultats d’une étude de la précipitation et du dépôt d’asphaltènes qui peuvent se produire lors d’une injection de gaz pauvre, d’une injection de CO2 ou d’une déplétion naturelle en conditions de réservoir. En outre, les effets de la pression de fonctionnement, de la concentration en gaz injecté et du débit de production sur la précipitation et le dépôt d’asphaltènes ont été étudiés. Il a été constaté que l’importance du dépôt d’asphaltènes est plus prononcée dans le cas d’une injection de gaz pauvre comparativement à une injection de CO2 ou à une déplétion naturelle. Une augmentation du débit au cours d’expériences de déplétion naturelle a montré un accroissement considérable du dépôt d’asphaltènes et, en conséquence, une réduction de perméabilité au sein de la matrice poreuse. Par ailleurs, un dépôt d’asphaltènes plus important a été observé au cours des expériences d’injection de gaz lorsque la concentration molaire gazeuse dans le mélange était augmentée.

  1. Charge trapping characteristics of Au nanocrystals embedded in remote plasma atomic layer-deposited Al2O3 film as the tunnel and blocking oxides for nonvolatile memory applications

    International Nuclear Information System (INIS)

    Lee, Jaesang; Kim, Hyungchul; Park, Taeyong; Ko, Youngbin; Ryu, Jaehun; Jeon, Heeyoung; Park, Jingyu; Jeon, Hyeongtag

    2012-01-01

    Remote plasma atomic layer deposited (RPALD) Al 2 O 3 films were investigated to apply as tunnel and blocking layers in the metal-oxide-semiconductor capacitor memory utilizing Au nanocrystals (NCs) for nonvolatile memory applications. The interface stability of an Al 2 O 3 film deposited by RPALD was studied to observe the effects of remote plasma on the interface. The interface formed during RPALD process has high oxidation states such as Si +3 and Si +4 , indicating that RPALD process can grow more stable interface which has a small amount of fixed oxide trap charge. The significant memory characteristics were also observed in this memory device through the electrical measurement. The memory device exhibited a relatively large memory window of 5.6 V under a 10/-10 V program/erase voltage and also showed the relatively fast programming/erasing speed and a competitive retention characteristic after 10 4 s. These results indicate that Al 2 O 3 films deposited via RPALD can be applied as the tunnel and blocking oxides for next-generation flash memory devices.

  2. Study of a micro-sublimation apparatus with removal of the vapours by pumping; application to the analysis of fluorinated products (1963); Etude d'un appareillage de microsublimation avec entrainement des vapeurs par pompage et application a l'analyse des produits fluores (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Delvalle, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-07-01

    Micro-sublimation analysis presents definite advantages both from the qualitative and quantitative points of view. An automatic micro-sublimation analysis apparatus has been developed for the analysis of fluorinated products (ClF{sub 3}, HF, UF{sub 6}, etc.) but this is only one particular application of a method which has a far wider field of possible applications. We give first the most favorable conditions for the operation of such an apparatus. These conditions are the use of a detector which is linear and independent of the nature of the gas, the flow of the sublimed vapours in the conditions of molecular flow, and finally a reproducible and linear re-heating of the separating trap. The apparatus thus built has the advantage of yielding any analysis without prior calibration. It also makes possible the easy identification of an unknown product by the determination of its vapour pressure curve and its molecular weight. The analysis of fluorinated products with this apparatus has shown that the experimental results agree well with what is expected. (author) [French] L'analyse par microsublimation presente un interet certain tant au point de vue qualitatif que quantitatif. Nous avons mis au point un appareillage automatique d'analyse par microsublimation pour l'analyse des produits fluores (CIF{sub 3}, HF, UF{sub 6}, etc.) mais il ne s'agit que de l'application a un cas particulier d'une methode ayant un champ d'applications bien plus vaste. Nous exposons tout d'abord les conditions les plus favorables au bon fonctionnement d'un tel appareil. Ces conditions sont l'emploi d'un detecteur lineaire et independant de la nature du gaz, l'ecoulement des vapeurs sublimees en regime moleculaire et enfin un rechauffage reproductible et lineaire du piege separateur. L'appareil ainsi realise presente l'avantage d'effectuer une analyse quelconque sans etalonnage prealable. Il permet en outre d'identifier aisement un corps inconnu par la determination de sa courbe de tension

  3. Fast neutron dosimetry for radioprotection near large accelerators. Application to the proton synchrotron Saturne; Dosimetrie des neutrons rapides en vue de la radioprotection aupres des grands accelerateurs. Application au synchrotron a protons Saturne

    Energy Technology Data Exchange (ETDEWEB)

    Tardy-Joubert, P

    1963-07-01

    Methods are described that are used for the measurement of a neutron flux, and of the corresponding energy flux and dose absorbed. The methods are checked experimentally by the use of neutron sources of known energy distribution. The conditions of use of a proportional counter for recoil protons are described. The experimental results obtained with the synchrotron SATURNE at Saclay are described. (author) [French] L'auteur presente les methodes utilisables pour la mesure d'un flux de neutrons, du flux d'energie et de la dose absorbee correspondants. Les methodes sont verifiees experimentalement au moyen de sources de neutrons de spectre connu. Les conditions d'emploi d'un compteur proportionnel a protons de recul sont definies. Les resultats experimentaux obtenus aupres du synchrotron Saturne de Saclay sont presentes. (auteur)

  4. The performances of natural gas infrared radiation in paints baking; Les performances de l`infrarouge gaz pour la cuisson des peintures

    Energy Technology Data Exchange (ETDEWEB)

    Lourdou, I. [Gaz de France, 75 - Paris (France). Centre d`essais de recherches sur les utilisations du gaz

    1998-04-01

    The direction of research of Gaz de France (GdF) company, in association with the centre for technical studies of aeraulic and thermal industries (CETIAT), has carried out infrared radiation baking tests on real painted parts using natural gas burners. Tests were performed on the Erica test facility. The development of the use of infrared gas burners in the mechanical industry requires an optimum use of this technology in the baking cycle. (J.S.)

  5. La micro-entreprise moyen de lutte contre la pauvreté: mise en évidence par application au niveau des régions tunisiennes = Micro-enterprises are the medium against poverty: Its application in Tunisian regions

    Directory of Open Access Journals (Sweden)

    Makram Gaaliche

    2013-12-01

    Full Text Available La contribution du secteur des micro-entreprises en Tunisie, dans la lutte contre la pauvreté, s’est manifestée de telle sorte que, tout accroissement du nombre d’unité de micro-entreprise entraîne une réduction du taux de pauvreté. En outre, il s’est avérée que la participation de ces petites unités dans la lutte contre la pauvreté, varie d’une région à une autre, selon le secteur d’activité y exerçantes. La détection d’une telle spécialisation sectorielle au niveau de la lutte contre la pauvreté, permet l’adoption de politiques régionales ciblées, destinées à encourager la création de micro-entreprises, au niveau des secteurs d’activité les plus pertinents.In Tunisia, the contribution of the microentreprises sector, in the fight against poverty, has appeared so that, every increasing in the number of the microentreprises involves a reduction of the poverty rate. In addition, it proved that the participation of these small unities in the fight against poverty varies from one area to another, according to the activity sectors. The detection of such sectoral specialization on the level of the fight against poverty, allows the adoption of targeted regional policies, intended to encourage the creation of microentreprises, in the most relevant activity sectors.

  6. Bonding properties of FCC-like Au 44 (SR) 28 clusters from X-ray absorption spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Rui [Department of Chemistry, Dalhousie University, Halifax, NS B3H 4R2, Canada.; Chevrier, Daniel M. [Department of Chemistry, Dalhousie University, Halifax, NS B3H 4R2, Canada.; Zeng, Chenjie [Department of Chemistry, Carnegie Mellon University, Pittsburgh, PA 15213, USA.; Jin, Rongchao [Department of Chemistry, Carnegie Mellon University, Pittsburgh, PA 15213, USA.; Zhang, Peng [Department of Chemistry, Dalhousie University, Halifax, NS B3H 4R2, Canada.

    2017-11-01

    Thiolate-protected gold clusters with precisely controlled atomic composition have recently emerged as promising candidates for a variety of applications because of their unique optical, electronic, and catalytic properties. The recent discovery of the Au44(SR)28 total structure is considered as an interesting finding in terms of the face-centered cubic (FCC)-like core structure in small gold-thiolate clusters. Herein, the unique bonding properties of Au44(SR)28 is analyzed using temperature-dependent X-ray absorption spectroscopy (XAS) measurements at the Au L3-edge and compared with other FCC-like clusters such as Au36(SR)24 and Au28(SR)20. A negative thermal expansion was detected for the Au–Au bonds of the metal core (the first Au–Au shell) and was interpreted based on the unique Au core structure consisting of the Au4 units. EXAFS fitting results from Au28(SR)20, Au36(SR)24, and Au44(SR)28 show a size-dependent negative thermal expansion behavior in the first Au–Au shell, further highlighting the importance of the Au4 units in determining the Au core bonding properties and shedding light on the growth mechanism of these FCC-like Au clusters.

  7. Electrografting of thionine diazonium cation onto the graphene edges and decorating with Au nano-dendrites or glucose oxidase: Characterization and electrocatalytic applications.

    Science.gov (United States)

    Shervedani, Reza Karimi; Amini, Akbar; Sadeghi, Nima

    2016-03-15

    Thionine (Th) diazonium cation is covalently attached onto the glassy carbon (GC) electrode via graphene nanosheets (GNs) (GC-GNs-Th). The GC-GNs-Th electrode is subjected to further modifications to fabricate (i) glucose and (ii) nitrite sensors. Further modifications include: (i) direct immobilization of glucose oxidase (GOx) and (ii) electrodeposition of gold dendrite-like nanostructures (DGNs) on the GC-GNs-Th surface, constructing GC-GNs-Th-GOx and GC-GNs-Th-DGNs modified electrodes, respectively. The GC-GNs-Th-GOx biosensor exhibited a linear response range to glucose, from 0.5 to 6.0mM, with a limit of detection (LOD) of 9.6 μM and high sensitivity of 43.2 µAcm(-2)mM(-1). Also, the GC-GNs-Th-DGNs sensor showed a wide dynamic response range for NO2(-) ion with two linear parts, from 0.05 μM to 1.0 μM and 30.0 μM to 1.0mM, a sensitivity of 263.2 μAmM(-1) and a LOD of 0.01 μM. Applicability of the modified electrodes was successfully tested by determination of glucose in human blood serum and nitrite in water based on addition/recovery tests. Copyright © 2015 Elsevier B.V. All rights reserved.

  8. Architecture effects of glucose oxidase/Au nanoparticle composite Langmuir-Blodgett films on glucose sensing performance

    Science.gov (United States)

    Wang, Ke-Hsuan; Wu, Jau-Yann; Chen, Liang-Huei; Lee, Yuh-Lang

    2016-03-01

    The Langmuir-Blodgett (LB) deposition technique is employed to prepare nano-composite films consisting of glucose oxidase (GOx) and gold nanoparticles (AuNPs) for glucose sensing applications. The GOx and AuNPs are co-adsorbed from an aqueous solution onto an air/liquid interface in the presence of an octadecylamine (ODA) template monolayer, forming a mixed (GOx-AuNP) monolayer. Alternatively, a composite film with a cascade architecture (AuNP/GOx) is also prepared by sequentially depositing monolayers of AuNPs and GOx. The architecture effects of the composite LB films on the glucose sensing are studied. The results show that the presence of AuNPs in the co-adsorption system does not affect the adsorption amount and preferred conformation (α-helix) of GOx. Furthermore, the incorporation of AuNPs in both composite films can significantly improve the sensing performance. However, the enhancement effects of the AuNPs in the two architectures are distinct. The major effect of the AuNPs is on the facilitation of charge-transfer in the (GOx-AuNP) film, but on the increase of catalytic activity in the (AuNP/GOx) one. Therefore, the sensing performance can be greatly improved by utilizing a film combining both architectures (AuNP/GOx-AuNP).

  9. Impact environnemental d'une désulfuration poussée des gazoles Environmental Impact of Gaz Oil Desulfurization

    Directory of Open Access Journals (Sweden)

    Armengol C.

    2006-11-01

    Full Text Available En une dizaine d'années, le diesel a connu un développement spectaculaire sur les marchés automobile français et européen et pourrait atteindre, en 1995, la moitié des immatriculations de véhicules particuliers en France et le quart en Europe de l'Ouest. Cette situation n'est évidemment pas sans poser de problèmes. Problèmes environnementaux puisque le moteur diesel est une source plus importante d'émissions d'oxydes d'azote et de particules que le convertisseur essence, mais également au niveau de l'industrie du raffinage qui, en France, n'est plus en mesure de satisfaire la demande en gazole. De plus, à compter du 1er octobre 1996, la teneur en soufre du gazole routier ne devra pas excéder 0,05 %, conformément aux nouvelles spécifications européennes. Cette perspective de production de carburants fortement désulfurés va affecter directement l'équilibre en hydrogène de la raffinerie et donc les autoconsommations et les émissions de CO2. L'objectif de cette étude est de mesurer l'impact sur l'environnement d'une réduction de la teneur en soufre des gazoles de 0,3 à 0,05 %. Le bilan est réalisé sur l'ensemble de la filière énergétique, depuis l'extraction du pétrole jusqu'à la combustion du carburant dans le moteur. Les gains et les pertes en termes de pollution locale ou globale sont évalués suivant la nature de l'hydrogène utilisé (oxydation partielle de résidus sous vide ou de charbon, reformage à la vapeur de gaz naturel ou de naphta électrolyse et la nature de la charge à traiter (gazole straight run ou light cycle oil lors de l'hydrodésulfuration. Over the past decade, diesel had made large advances in the French and European automobile markets. In 1995, diesel could account for half of all private vehicle registrations in France, and a quarter in Western Europe. This situation inevitably raises a number of problems : environmental problems, because the diesel engine emits more nitrogen oxides and

  10. The Development of Materials for Application to Control Rod Systems in Graphite moderated Reactors; Mise au Point de Materiaux pour les Dispositifs de Controle a Barres, Utilbes dans les Reacteurs Ralentis au Graphite; Razrabotka materialov , primenyaemykh v sistemakh upravlyayushchikh sterzhnej v reaktorakh s grafitovym zamedlitelem; Perfeccionamiento de Materiales Aplicables a las Barras de Control en los Reactores Moderados por Grafito

    Energy Technology Data Exchange (ETDEWEB)

    Wade, G. E.; Kempf, F. J. [Hanford Atomic Products Operation, General Electric Company, Richland, WA (United States)

    1964-06-15

    Material problems associated with the control- and safety-rod systems for graphite moderated, tube-type reactors can be divided into two categories: control materials and operating-channel liner materials. The control materials, such as boron or gadolinium, can be integral with the rod sheath, as in the boron stainless steel used for safety rods. Another approach is the enclosure of a boron-containing sintered compact, such as B{sub 4}C-graphite or B{sub 4}C-aluminium, in a metallic sheath. Rods of the latter type are adaptable for control purposes because of the increased percentages of boron that can be included. Test and fabrication experience indicate that a wide range of satisfactory rod designs is possible with any of these materials. The rod operating channels in the reactor often require liners to protect the surrounding graphite moderator from rod-insertion impact loads and wear and to help maintain channel alignment. Abrasion- and impact resistant, high-strength, low cross-section materials that will operate uncooled are required for these liners. Pyrolytic graphite, pyrolytic graphite composites, aluminium oxide and silicon carbide have been tested for such applications. Physical and irradiation damage data indicate that some of these materials are suitable for lining rod-operating channels. (author) [French] Les problemes de materiaux lies aux dispositifs de controle a barres de reglage et de securite pour les reacteurs tubulaires ralentis au graphite sont doubles et concernent les materiaux absorbants d'une part et les materiaux de garnissage des canaux d'autre part. Les materiaux absorbants tels que le bore ou le gadolinium peuvent former un tout avec le materiau de gainage comme dans le cas ou les barres de securite sont en acier inoxydable au bore. Une autre technique consiste a enfermer un melange presse et fritte contenant du bore, tel que B4C-graphite ou B4C-aluminium, dans une gaine metallique. Les barres de ce dernier type peuvent etre adaptees

  11. Heterojunction metal-oxide-metal Au-Fe{sub 3}O{sub 4}-Au single nanowire device for spintronics

    Energy Technology Data Exchange (ETDEWEB)

    Reddy, K. M., E-mail: mrkongara@boisestate.edu; Punnoose, Alex; Hanna, Charles [Department of Physics, Boise State University, Boise, Idaho 83725 (United States); Padture, Nitin P. [School of Engineering, Brown University, Providence, Rhode Island 02912 (United States)

    2015-05-07

    In this report, we present the synthesis of heterojunction magnetite nanowires in alumina template and describe magnetic and electrical properties from a single nanowire device for spintronics applications. Heterojunction Au-Fe-Au nanowire arrays were electrodeposited in porous aluminum oxide templates, and an extensive and controlled heat treatment process converted Fe segment to nanocrystalline cubic magnetite phase with well-defined Au-Fe{sub 3}O{sub 4} interfaces as confirmed by the transmission electron microscopy. Magnetic measurements revealed Verwey transition shoulder around 120 K and a room temperature coercive field of 90 Oe. Current–voltage (I-V) characteristics of a single Au-Fe{sub 3}O{sub 4}-Au nanowire have exhibited Ohmic behavior. Anomalous positive magnetoresistance of about 0.5% is observed on a single nanowire, which is attributed to the high spin polarization in nanowire device with pure Fe{sub 3}O{sub 4} phase and nanocontact barrier. This work demonstrates the ability to preserve the pristine Fe{sub 3}O{sub 4} and well defined electrode contact metal (Au)–magnetite interface, which helps in attaining high spin polarized current.

  12. Some economic aspects of natural uranium graphite gas reactor types. Present status and trends of costs in France; Quelques aspects economiques de la filiere uranium naturel - Graphite - gaz. Etat actuel et tendance des couts en France

    Energy Technology Data Exchange (ETDEWEB)

    Gaussens, J; Tanguy, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Leo, B [Electricite de France (EDF), 75 - Paris (France)

    1964-07-01

    reduction in investment costs can be obtained without relying on fuel enrichment, and that this development is accompanied moreover by improvements in the operational safety of the reactor. The economic aspects of the main technical problems entailed by these developments are discussed: loading and unloading machines, blowers etc... (authors) [French] Dans une premiere partie, on situe l'interet economique de l'utilisation de l'uranium naturel comme combustible. Cet interet reside a la fois dans le nombre limite et la simplicite relative des operations de mise en forme des elements combustibles, dans le faible cout du produit fini par kwh et dans les immobilisations modestes en capital qu'implique ce cycle par rapport ou cycle de l'uranium enrichi. Tous ces elements permettent de reduire le caractere aleatoire des evaluations des couts, particulierement marque dans le cas de l'uranium enrichi, en raison de la complexite de son cycle et des incertitudes concernant le prix du plutonium. Enfin, la diversite des sources d'approvisionnement en concentre d'uranium naturel opposee au quasi monopole actuel de la separation isotopique, et le faible cout du stockage de ce concentre, offrent des garanties en matiere de securite d'approvisionnement et d'independance economique et politique appreciables par rapport a l'uranium enrichi. En ce qui concerne l'ensemble des capitaux immobilises, on montre que si le cout des centrales au graphite-gaz est plus eleve que celui des centrales eau legere pour certaines gammes de puissance, ce resultat est fortement nuance des que l'on fait intervenir dans un souci d'independance nationale le cout de l'equipement de production des combustibles de l'une et l'autre filiere. Enfin, le cout marginal de la puissance du reacteur au graphite est faible, ses limitations technologiques ont considerablement recule (grace en particulier a l'utilisation du beton precontraint). On sait que la tendance actuelle est a l'accroissement de la puissance unitaire des

  13. Geochemical Study of Natural CO2 Emissions in the French Massif Central: How to Predict Origin, Processes and Evolution of CO2 Leakage Étude géochimique des émissions naturelles de CO2 du Massif Central : origine et processus de migration du gaz

    Directory of Open Access Journals (Sweden)

    Battani A.

    2010-05-01

    de surveillance des futurs sites de stockage de CO2. Au cours des campagnes de terrain, nous avons analysé des flux de CO2 entre le sol et l’atmosphère, et nous avons prélevé et analysé à la fois des gaz des sols, et du gaz provenant de sources carbo-gazeuses, présentes dans toute la région. Un dispositif de « monitoring continu » dans le temps a également été testé, afin d’enregistrer conjointement les teneurs en CO2 de l’atmosphère et dans le sol en un point précis. Nous avons pu mettre au point un suivi géochimique basé sur la composition isotopique des gaz rares prélevés dans les sols. L’ensemble de nos résultats, confronté à la géologie de terrain, nous a permis de mettre en évidence l’origine mantellique du CO2. Ce CO2 remonte rapidement à la surface à l’état gazeux, le long de failles normales et/ou décrochantes, actives actuellement. Les teneurs et flux de CO2 dans le sol sont spatialement variables et élevés, et montrent également une origine mantellique. Les teneurs atmosphériques semblent faiblement augmenter par rapport à l’important dégazage observé dans la région.

  14. Controlled electrodeposition of Au monolayer film on ionic liquid

    Science.gov (United States)

    Ma, Qiang; Pang, Liuqing; Li, Man; Zhang, Yunxia; Ren, Xianpei; Liu, Shengzhong Frank

    2016-05-01

    Gold (Au) nanoparticles have been attractive for centuries for their vibrant appearance enhanced by their interaction with sunlight. Nowadays, there have been tremendous research efforts to develop them for high-tech applications including therapeutic agents, sensors, organic photovoltaics, medical applications, electronics and catalysis. However, there remains to be a challenge to fabricate a monolayer Au coating with complete coverage in controlled fashion. Here we present a facile method to deposit a uniform Au monolayer (ML) film on the [BMIM][PF6] ionic liquid substrate using an electrochemical deposition process. It demonstrates that it is feasible to prepare a solid phase coating on the liquid-based substrate. Moreover, the thickness of the monolayer coating can be controlled to a layer-by-layer accuracy.

  15. Spherical and polygonal shape of Au nanoparticles coated functionalized polymer microspheres

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Ting; Li, Yingzhi; Zhang, Junxian; Qi, Yalong; Zhao, Xin; Zhang, Qinghua, E-mail: qhzhang@dhu.edu.cn

    2015-08-01

    Highlights: • PS/PPy with well-defined core/shell structures was prepared in aqueous solution. • Au NPs were coated on PS/PPy by the fixation and continuous growth process. • Mercapto-groups played a role in the number and morphology of Au shell. • PS/PPy/Au had homogeneous and dense Au coatings with different shape. - Abstract: Uniform polystyrene (PS)/polypyrrole (PPy) composite microspheres with well-defined core/shell structures are synthesized by chemical oxidative polymerization. Gold nanoparticles (Au NPs) are successfully coated on the surface of PS/PPy microspheres by means of electrostatic interactions due to the functionalized PPy coatings supplying sufficient amino groups and the additive of mercapto acetic acid. Furthermore, the as-prepared PS/PPy/Au microspheres serving as seeds facilitate Au NPs further growth by in situ reduction in HAuCl{sub 4} solution to obtain PS/PPy/Au spheres with the core/shell/shell structure. Morphology observation demonstrates that the monodisperse PS/PPy/Au microspheres compose of uniform cores and the compact coatings containing distinct two layers. X-ray diffraction and X-ray photoelectron spectroscope confirm the existence of PPy and Au on the surface of the composite spheres. This facile approach to preparing metal-coated polymer spheres supplies the potential applications in biosensors, electronics and medical diagnosis.

  16. Morphological Characteristics of Au Films Deposited on Ti: A Combined SEM-AFM Study

    Directory of Open Access Journals (Sweden)

    Francesco Ruffino

    2018-03-01

    Full Text Available Deposited Au films and coatings are, nowadays, routinely used as active or passive elements in several innovative electronic, optoelectronic, sensing, and energy devices. In these devices, the physical properties of the Au films are strongly determined by the films nanoscale structure. In addition, in these devices, often, a layer of Ti is employed to promote adhesion and, so, influencing the nanoscale structure of the deposited Au film. In this work, we present experimental analysis on the nanoscale cross-section and surface morphology of Au films deposited on Ti. In particular, we sputter-deposited thick (>100 nm thickness Au films on Ti foils and we used Scanning Electron Microscopy to analyze the films cross-sectional and surface morphology as a function of the Au film thickness and deposition angle. In addition, we analyzed the Au films surface morphology by Atomic Force Microscopy which allowed quantifying the films surface roughness versus the film thickness and deposition angle. The results establish a relation between the Au films cross-sectional and surface morphologies and surface roughness to the film thickness and deposition angle. These results allow setting a general working framework to obtain Au films on Ti with specific morphological and topographic properties for desired applications in which the Ti adhesion layer is needed for Au.

  17. Méthode analytique généralisée pour le calcul du coning. Nouvelle solution pour calculer le coning de gaz, d'eau et double coning dans les puits verticaux et horizontaux Generalized Analytical Method for Coning Calculation. New Solution to Calculation Both the Gas Coning, Water Coning and Dual Coning for Vertical and Horizontal Wells

    Directory of Open Access Journals (Sweden)

    Pietraru V.

    2006-11-01

    Full Text Available Une nouvelle méthode analytique d'évaluation du coning d'eau par bottom water drive et/ou de gaz par gas-cap drive dans les puits horizontaux et verticaux a été développée pour les réservoirs infinis [1]. Dans cet article, une généralisation de cette méthode est présentée pour les réservoirs confinés d'extension limitée dont le toit est horizontal. La généralisation proposée est basée sur la résolution des équations différentielles de la diffusivité avec prise en compte des effets de drainage par gravité et des conditions aux limites pour un réservoir confiné. La méthode est applicable aux réservoirs isotropes ou anisotropes. L'hypothèse de pression constante à la limite de l'aire de drainage dans l'eau et/ou dans le gaz a été adoptée. Les pertes de charge dans l'aquifère et dans le gas-cap sont donc négligées. Les principales contributions de cet article sont : - L'introduction de la notion de rayon de cône, différent du rayon de puits. La hauteur du cône et le débit critique dépendent du rayon de cône alors qu'ils sont indépendants du rayon du puits. - Une nouvelle corrélation pour le calcul du débit critique sous forme adimensionnelle en fonction de trois paramètres : le temps, la longueur du drain horizontal (nulle pour un puits vertical et le rayon de drainage. - Des corrélations pour le calcul du rapport des débits gaz/huile (GOR ou de la fraction en eau (fw, pendant les périodes critique et postcritique, qui tiennent compte de la pression capillaire et des perméabilités relatives. - Des corrélations pour le calcul des rapports de débits gaz/huile et eau/huile pendant les périodes pré, post et supercritique en double coning. - Des critères pour le calcul du temps de percée au puits en simple coning de gaz ou d'eau, ou en double coning de gaz et d'eau. A new analytical method for assessing water and/or gas coning in horizontal and vertical wells has been developed for infinite

  18. Au nanoinjectors for electrotriggered gene delivery into the cell nucleus.

    Science.gov (United States)

    Kang, Mijeong; Kim, Bongsoo

    2015-01-01

    Intracellular delivery of exogenous materials is an essential technique required for many fundamental biological researches and medical treatments. As our understanding of cell structure and function has been improved and diverse therapeutic agents with a subcellular site of action have been continuously developed, there is a demand to enhance the performance of delivering devices. Ideal intracellular delivery devices should convey various kinds of exogenous materials without deteriorating cell viability regardless of cell type and, furthermore, precisely control the location and the timing of delivery as well as the amount of delivered materials for advanced researches.In this chapter the development of a new intracellular delivery device, a nanoinjector made of a Au (gold) nanowire (a Au nanoinjector) is described in which delivery is triggered by external application of an electric pulse. As a model study, a gene was delivered directly into the nucleus of a neuroblastoma cell, and successful delivery without cell damage was confirmed by the expression of the delivered gene. The insertion of a Au nanoinjector directly into a cell can be generally applied to any kind of cell, and a high degree of surface modification of Au allows attachment of diverse materials such as proteins, small molecules, or nanoparticles as well as genes on Au nanoinjectors. This expands their applicability, and it is expected that they will provide important information on the effects of delivered exogenous materials and consequently contribute to the development of related therapeutic or clinical technologies.

  19. L’apprentissage au cern

    CERN Multimedia

    2007-01-01

    pour les professions d’électronicien(ne) et de laborantin(e) en physique L’apprentissage au CERN est régi par les lois, règlements et contrats en vigueur dans le canton de Genève. En cas de réussite à l’examen de fin d’apprentissage, les apprentis obtiennent le Certificat fédéral de capacité suisse (CFC). 6 places au total sont ouvertes au recrutement pour les deux professions. L’apprentissage dure 4 ans. Minima requis pour faire acte de candidature : avoir au moins 15 ans et moins de 21 ans à la date de début de l’apprentissage ; avoir terminé la scolarité obligatoire, au minimum 9e du Cycle d’orientation genevois (3e en France) ; être ressortissant d’un pays membre du CERN (Allemagne, Autriche, Belgique, Bulgarie, Danemark, Espagne, Finlande, France, Grèce, Hongrie, Italie, Norvège, Pays-Bas, Pologne, Portugal, Royaume-Uni, République tchèque, République slovaque , Suède, Suisse) ; pour les résidents en Suisse : être ressortissant su...

  20. Wetting Behavior of Ternary Au-Ge-X (X = Sb, Sn) Alloys on Cu and Ni

    Science.gov (United States)

    Jin, S.; Valenza, F.; Novakovic, R.; Leinenbach, C.

    2013-06-01

    Au-Ge-based alloys are potential substitutes for Pb-rich solders currently used for high-temperature applications. In the present work, the wetting behavior of two Au-Ge-X (X = Sb, Sn) ternary alloys, i.e., Au-15Ge-17Sb and Au-13.7 Ge-15.3Sn (at.%), in contact with Cu and Ni substrates has been investigated. Au-13.7Ge-15.3Sn alloy showed complete wetting on both Cu and Ni substrates. Total spreading of Au-15Ge-17Sb alloy on Cu was also observed, while the final contact angle of this alloy on Ni was about 29°. Pronounced dissolution of Cu substrates into the solder alloys investigated was detected, while the formation of Ni-Ge intermetallic compounds at the interface of both solder/Ni systems suppressed the dissolution of Ni into the solder.

  1. Photoluminescence enhancement in few-layer WS2 films via Au nanoparticles

    Directory of Open Access Journals (Sweden)

    Sin Yuk Choi

    2015-06-01

    Full Text Available Nano-composites of two-dimensional atomic layered WS2 and Au nanoparticles (AuNPs have been fabricated by sulfurization of sputtered W films followed by immersing into HAuCl4 aqueous solution. The morphology, structure and AuNPs distribution have been characterized by electron microscopy. The decorated AuNPs can be more densely formed on the edge and defective sites of triangle WS2. We have compared the optical absorption and photoluminescence of bare WS2 and Au-decorated WS2 layers. Enhancement in the photoluminescence is observed in the Au-WS2 nano-composites, attributed to localized surface plasmonic effect. This work provides the possibility to develop photonic application in two-dimensional materials.

  2. Spectroscopically forbidden infra-red emission in Au-vertical graphene hybrid nanostructures

    Science.gov (United States)

    Sivadasan, A. K.; Parida, Santanu; Ghosh, Subrata; Pandian, Ramanathaswamy; Dhara, Sandip

    2017-11-01

    Implementation of Au nanoparticles (NPs) is a subject for frontier plasmonic research due to its fascinating optical properties. Herein, the present study deals with plasmonic assisted emission properties of Au NPs-vertical graphene (VG) hybrid nanostructures. The influence of effective polarizability of Au NPs on the surface enhanced Raman scattering and luminescence properties is investigated. In addition, a remarkable infra-red emission in the hybrid nanostructures is observed and interpreted on the basis of intra-band transitions in Au NPs. The flake-like nanoporous VG structure is invoked for the generation of additional confined photons to impart additional momentum and a gradient of confined excitation energy towards initiating the intra-band transitions of Au NPs. Integrating Au plasmonic materials in three-dimensional VG nanostructures enhances the light-matter interactions. The present study provides a new adaptable plasmonic assisted pathway for optoelectronic and sensing applications.

  3. Transverse velocity scaling in 197Au+197Au fragmentation

    International Nuclear Information System (INIS)

    Lukasik, J.; Hudan, S.; Lavaud, F.

    2002-07-01

    Invariant transverse-velocity spectra of intermediate-mass fragments were measured with the 4π multi-detector system INDRA for collisions of 197 Au on 197 Au at incident energies between 40 and 150 MeV per nucleon. Their scaling properties as a function of incident energy and atomic number Z are used to distinguish and characterize the emissions in (i) peripheral collisions at the projectile and target rapidities, and in (ii) central and (iii) peripheral collisions near mid-rapidity. The importance of dynamical effects is evident in all three cases and their origin is discussed. (orig.)

  4. Flow in Au+Au collisions at RHIC

    Science.gov (United States)

    Belt Tonjes, Marguerite; the PHOBOS Collaboration; Back, B. B.; Baker, M. D.; Ballintijn, M.; Barton, D. S.; Betts, R. R.; Bickley, A. A.; Bindel, R.; Budzanowski, A.; Busza, W.; Carroll, A.; Decowski, M. P.; García, E.; George, N.; Gulbrandsen, K.; Gushue, S.; Halliwell, C.; Hamblen, J.; Heintzelman, G. A.; Henderson, C.; Hofman, D. J.; Hollis, R. S.; Hołyński, R.; Holzman, B.; Iordanova, A.; Johnson, E.; Kane, J. L.; Katzy, J.; Khan, N.; Kucewicz, W.; Kulinich, P.; Kuo, C. M.; Lin, W. T.; Manly, S.; McLeod, D.; Mignerey, A. C.; Nouicer, R.; Olszewski, A.; Pak, R.; Park, I. C.; Pernegger, H.; Reed, C.; Remsberg, L. P.; Reuter, M.; Roland, C.; Roland, G.; Rosenberg, L.; Sagerer, J.; Sarin, P.; Sawicki, P.; Skulski, W.; Steinberg, P.; Stephans, G. S. F.; Sukhanov, A.; Tang, J.-L.; Trzupek, A.; Vale, C.; van Nieuwenhuizen, G. J.; Verdier, R.; Wolfs, F. L. H.; Wosiek, B.; Wozniak, K.; Wuosmaa, A. H.; Wysłouch, B.

    2004-08-01

    The study of flow can provide information on the initial state dynamics and the degree of equilibration attained in heavy-ion collisions. This contribution presents results for both elliptic and directed flow as determined from data recorded by the PHOBOS experiment in Au+Au runs at RHIC at \\sqrt{sNN} = 19.6, 130 and 200 GeV. The PHOBOS detector provides a unique coverage in pseudorapidity for measuring flow at RHIC. The systematic dependence of flow on pseudorapidity, transverse momentum, centrality and energy is discussed.

  5. Synthesis of a polycyclic aromatic hydrocarbon marked with carbon-14: (b, d e f) dibenzo-chrysene {sup 14}C-7,14; Synthese d'un hydrocarbure aromatique polycyclique marque au carbone 14: le dibenzo (b, d e f) chrysene {sup 14}C-7,14

    Energy Technology Data Exchange (ETDEWEB)

    Chatelain, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-07-01

    (b, d e f) dibenzo-chrysene C-7,14 has been synthesized from radioactive carbon dioxide and the organic magnesium compound derived from 1,5 dibromo naphthalene. The product has been purified by a very precise series of fractionated chromatographs on alumina having a chromatographic activity. This has necessitated the development of a special technique. (author) [French] Le dibenzo (b, d e f) chrysene 14C-7,14 a ete synthetise au depart de gaz carbonique radioactif et de bis-organomagnesien derive du dibromo-1,5 naphtalene. Le produit a ete purifie par une serie de chromatographies fractionnees sur alumine d'activite chromatographique tres precise. Ceci a fait l'objet d'une mise au point de technique. (auteur)

  6. Development of Au-Ge based candidate alloys as an alternative to high-lead content solders

    DEFF Research Database (Denmark)

    Chidambaram, Vivek; Hald, John; Hattel, Jesper Henri

    2010-01-01

    Au-Ge based candidate alloys have been proposed as an alternative to high-lead content solders that are currently being used for high-temperature applications. The changes in microstructure and microhardness associated with the addition of low melting point metals namely In, Sb and Sn to the Au......-Ge-In and Au-Ge-Sn combinations was determined to be the classic solid solution strengthening. The Au-Ge-Sb combination was primarily strengthened by the refined (Ge) dispersed phase. The aging temperature had a significant influence on the microhardness in the case of the Au-Ge-Sn candidate alloy...

  7. Production of Methanol-Higher Alcohol Mixtures from Natural Gas via Syngas Chemistry Production de mélanges méthanol-alcools supérieurs à partir du gaz, via (CO + H2

    Directory of Open Access Journals (Sweden)

    Courty P.

    2006-11-01

    Full Text Available Despite the prevailing position of ethers (MTBE, TAME as octane boosters, and the low oil prices at present, alcohol synthesis remains one of the near future means of natural gas upgrading via syngas chemistry. After a review of the available process development data in the field, this paper focuses on the IFP process studies, based on the CuCo and CuNi catalysts developed by Institut Français du Pétrole (IFR, France and Idemitsu Kosan (Japan. The adequacy between the product specifications, and the optimization of the performances is then discussed in a technico-economic context, together with a presentation of lab scale, pilot scale and demonstration scale test results. As a conclusion, a prospective overall view brings together todays economics and some improvement guidelines dealing with investments, operating cost and catalyst performances. Cette publication présente les travaux de R & D (Recherche et Développement menés par l'Institut Français du Pétrole (IFP, France et Idemitsu Kosan (Japon en synthèse d'alcools. Elle situe les résultats dans le contexte technique et économique actuel. L'accroissement constant des ressources prouvées en gaz et, chronologiquement, les deux crises pétrolières, la suppression du plomb dans les essences, ont conduit le monde industriel à intensifier les recherches concernant la synthèse d'alcools. Très récemment, les effets bénéfiques de l'addition d'alcools sur les émissions de polluants ont été mis en évidence. Toutefois, l'additivation de carburants par les alcools est en voie de disparition au profit des éthers, alors que, indépendamment, les procédés de production d'ammoniac, de méthanol, d'acide acétique, également fondés sur le gaz, se sont seuls développés. La synthèse d'alcools a fait l'objet de nombreux travaux, résumés dans les tableaux 1 et 2. L'étude des différents aspects réactionnels amène à prendre en compte l'exothermicité importante des r

  8. Application of resistivity measurements to the control of protein elutions using cellulose ion-exchangers; Application de la mesure de resistivite au controle d'une elution de proteines a partir de celluloses echangeuses d'ions

    Energy Technology Data Exchange (ETDEWEB)

    Duplaa, A M; Brandolin, G [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1969-07-01

    The eluate obtained by chromatography of a mixture of proteins on columns of cellulose ion-exchangers (DEAE-cellulose and CM-cellulose) sometimes have very low proteins concentrations. The resistivity measurement gives more information than the UV control which is often inadequate. The modifications undergone by elution buffers are recorded and the best conditions for the extraction of an enzymatic protein are determined. The tests are performed without proteins on the columns; they consist in a double control of resistivity and ph of elution buffers after they pass on the exchangers columns. (author) [French] Apres chromatographie d'un melange de proteine; sur colonnes d'echangeurs d'ions tels que DEAE-cellulose et CM-cellulose, les eluats obtenus ont quelquefois des concentrations en proteines tres faibles. Au controle en UV souvent insuffisant, on a ajoute la mesure de resistivite apportant des donnees complementaires. Des essais, realises en l'absence de proteines et consistant a effectuer un double controle de resistivite et de pH des tampons d'elution apres leur passage sur colonnes d'echangeurs, ont permis d'enregistrer les modifications subies par ces tampons et de determiner leurs meilleures conditions d'utilisation pour l'extraction d'une proteine enzymatique. (auteur)

  9. Heat transfer in gas-cooled piles; Echanges thermiques dans les piles a gaz

    Energy Technology Data Exchange (ETDEWEB)

    Le Foll, J; Gelin, P; Robert, E de [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    Measurements under steady flow conditions gave the distribution of the local heat transfer coefficient along the cross section perimeter of a longitudinally finned can. The distribution is generally affected by strong irregularities which make the elementary theory of heat transfer along the fins inapplicable. We studied systematically the above mentioned distribution and established however that heat transfer properties were rendered similar to those of an annular channel cross-section with isotherms heat exchange perimeter by application of two non-dimensional parameters. These parameters may be calculated by integration on the specific channel cross section and will generally permit to reach a sufficient approximation. Although the computation is rather difficult the evaluation of the parameters is more easily done by electrical analogy measurements and there even exits a possibility to learn directly about the effect of slight changes of the can outer perimeter. Now, the channel as a whole is rated to such performances as are apt to keep the can temperature below a given limiting value, generally by making the assumption that the properties of the cross section remain identical through-out the channel. Usually, however, there are many separate fuel elements along the channel and consequently flux and heat transfer coefficient distribution and local temperature values on the can may be significantly disturbed compared to the simpler case above mentioned. We must therefore bear in mind to design the fuel elements to avoid end caps becoming in turn overheated. Moreover, fuel end caps may be more heavily stressed than the other parts of the can which results in a lower value of the temperature limit and it must be remembered they lie nearer fuel hotter parts on the rod axis, precisely where fuel discontinuity, to make matters worse, may cause the flux to show a rise. The flux rise was computed on an electronic machine and subsequently measured directly

  10. Chiral magnetic effect search in p+Au, d+Au and Au+Au collisions at RHIC

    Science.gov (United States)

    Zhao, Jie

    2018-01-01

    Metastable domains of fluctuating topological charges can change the chirality of quarks and induce local parity violation in quantum chromodynamics. This can lead to observable charge separation along the direction of the strong magnetic field produced by spectator protons in relativistic heavy-ion collisions, a phenomenon called the chiral magnetic effect (CME). A major background source for CME measurements using the charge-dependent azimuthal correlator (Δϒ) is the intrinsic particle correlations (such as resonance decays) coupled with the azimuthal elliptical anisotropy (v2). In heavy-ion collisions, the magnetic field direction and event plane angle are correlated, thus the CME and the v2-induced background are entangled. In this report, we present two studies from STAR to shed further lights on the background issue. (1) The Δϒ should be all background in small system p+Au and d+Au collisions, because the event plane angles are dominated by geometry fluctuations uncorrelated to the magnetic field direction. However, significant Δϒ is observed, comparable to the peripheral Au+Au data, suggesting a background dominance in the latter, and likely also in the mid-central Au+Au collisions where the multiplicity and v2 scaled correlator is similar. (2) A new approach is devised to study Δϒ as a function of the particle pair invariant mass (minv) to identify the resonance backgrounds and hence to extract the possible CME signal. Signal is consistent with zero within uncertainties at high minv. Signal at low minv, extracted from a two-component model assuming smooth mass dependence, is consistent with zero within uncertainties.

  11. Filipino au pairs on the move

    DEFF Research Database (Denmark)

    Dalgas, Karina Märcher

    2016-01-01

    Most Filipina au pairs in Denmark send remittances back home, and for many, au pairing forms part of longer-term migration trajectories. This article explores how Filipina au pairs try to carve out a future for themselves abroad. It shows that they navigate within tight webs of financial interdep......Most Filipina au pairs in Denmark send remittances back home, and for many, au pairing forms part of longer-term migration trajectories. This article explores how Filipina au pairs try to carve out a future for themselves abroad. It shows that they navigate within tight webs of financial...

  12. Level lifetimes of Au52+ in Au plasma

    International Nuclear Information System (INIS)

    Liu Bo; Zhu Zhiyan; Jiang Gang; Zhu Zhenghe

    2003-01-01

    Based on the extended relativistic multiconfiguration Dirac-Fock theory, the level lifetimes, level widths and wavelengths of Au 52+ have been calculated using the General-purpose Relativistic Atomic Structure Program. The wavelengths obtained are in good agreement with the experimental data available. The relationship between the level lifetimes and the level widths satisfies the Heisenberg uncertainty principle

  13. Graphene nanoribbons synthesized from molecular precursor polymerization on Au(110)

    Energy Technology Data Exchange (ETDEWEB)

    Massimi, Lorenzo; Ourdjini, Oualid; Della Pia, Ada; Mariani, Carlo; Betti, Maria Grazia [Dipartimento di Fisica, Università di Roma La Sapienza, Piazzale Aldo Moro 2, I - 00185 Roma (Italy); Cavaliere, Emanuele; Gavioli, Luca [i-LAMP & Dipartimento di Matematica e Fisica, Università Cattolica, 25121 Brescia (Italy)

    2015-06-23

    A spectroscopic study of 10,10-dibromo-9,9 bianthracene (DBBA) molecules deposited on the Au(110) surface is presented, by means of ultraviolet and X-ray photoemission, and X-ray absorption spectroscopy. Through a thermally activated procedure, these molecular precursors polymerize and eventually form graphene nanoribbons (GNRs) with atomically controlled shape and width, very important building blocks for several technological applications. The GNRs observed by scanning tunneling microscopy (STM) appear as short segments on top of the gold surface reconstruction, pointing out the delicate balance among surface diffusion and surface corrugation in their synthesis on the Au(110) surface.

  14. Reduced sintering of mass-selected Au clusters on SiO2 by alloying with Ti: an aberration-corrected STEM and computational study

    DEFF Research Database (Denmark)

    Niu, Yubiao; Schlexer, Philomena; Sebök, Béla

    2018-01-01

    Au nanoparticles represent the most remarkable example of a size effect in heterogeneous catalysis. However, a major issue hindering the use of Au nanoparticles in technological applications is their rapid sintering. We explore the potential of stabilizing Au nanoclusters on SiO2 by alloying them...... in the Au/Ti clusters, but in line with the model computational investigation, Au atoms were still present on the surface. Thus size-selected, deposited nanoalloy Au/Ti clusters appear to be promising candidates for sustainable gold-based nanocatalysis....

  15. Application of Alkaline Waterflooding to a High Acidity Crude Oil Application de l'injection d'eau alcaline au cas d'un pétrole brut à forte acidité

    Directory of Open Access Journals (Sweden)

    Abdel-Waly A.

    2006-11-01

    Full Text Available The main objective of this work was to study the enhanced recovery of a high acidity crude oil (South Geisum crude by alkaline solutions. Different properties of South Geisum crude oil, namely acidity, interfacial tension, and contact angle, were investigated. Displacement tests were carried out to study the effect of alkaline slug concentration, slug size, oil alkali type, and temperature viscosity on recovery. South Geisum crude oil is a highly acidic crude (4. 38 mg KOH/g. It was found that the interfacial tension between crude oil and formation water decreases with increasing alkaline concentration until it reaches a minimum, after which it increases again with a further increase in alkaline concentration. Interfacial tension between crude oil and displacement water also decreases with increasing alkaline concentration. Contact angle measurements indicated oil-wetting conditions that increase by the addition of alkaline solutions. Displacement floods showed that, at the early stages of displacement, oil recovery increases with increasing alkaline concentration until it reaches a maximum at 4 % by weight NaOH concentration. Also, at such early stages, an excessive increase in alkaline concentration results in lower oil recovery. On the other hand, after the injection of many pore volumes of water, oil recovery is almost the same regardless of the alkaline concentration. It was found also that oil recovery increases with increasing alkaline slug size until it reaches a maximum at 15 % PV, after which increasing slug size results in decreasing oil recovery (this result has not as yet been reported in the literature. Sodium hydroxide slugs produce more oil recovery than sodium carbonate slugs. Oil recovery increases with increasing temperature (from 25 to 55°C and decreasing oil viscosity. Cet article traite de la récupération, au moyen de solutions alcalines, d'un pétrole brut à forte acidité (brut de Geisum-Sud. Différentes propri

  16. Spectral study of the luminescence produced by the excitation of noble gases by alpha-rays; Etude spectrale de la luminescence due a l'excitation des gaz rares par les rayons alpha

    Energy Technology Data Exchange (ETDEWEB)

    Koch, L [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    Luminescence spectra of the noble gases He, A, Kr and Xe are studied under excitation by {alpha} rays. It is shown that the energy is transferred from excited levels of these gases to Hg and N{sub 2} impurities for impurity concentrations respectively less than 10{sup 6} and 10{sup 4}. These results confirm previous measurements concerning the period of luminescence and its variations versus nitrogen concentration in noble gases. (author) [French] On etudie les spectres de luminescence des gaz rares, He, A, Kr et Xe excites par une source intense de rayons {alpha}. Le transfert d'energie des etats excites des gaz rares sur les impuretes mercure et azote pour des concentrations respectives de ces impuretes inferieures a 1 ppm et 100 ppm est demontre. Ces resultats confirment les mesures anterieures concernant la duree de luminescence et ses variations avec la concentration d'azote dans les gaz rares. (auteur)

  17. Au-Ge based Candidate Alloys for High-Temperature Lead-Free Solder Alternatives

    DEFF Research Database (Denmark)

    Chidambaram, Vivek; Hald, John; Hattel, Jesper Henri

    2009-01-01

    Au-Ge based candidate alloys have been proposed as an alternative to high-lead content solders that are currently being used for high-temperature applications. The influence of the low melting point metals namely In, Sb and Sn to the Au-Ge eutectic with respect to the microstructure and microhard......Au-Ge based candidate alloys have been proposed as an alternative to high-lead content solders that are currently being used for high-temperature applications. The influence of the low melting point metals namely In, Sb and Sn to the Au-Ge eutectic with respect to the microstructure...... was primarily strengthened by the refined (Ge) dispersed phase. The distribution of phases played a relatively more crucial role in determining the ductility of the bulk solder alloy. In the present work it was found that among the low melting point metals, the addition of Sb to the Au-Ge eutectic would...

  18. La course au logement social

    OpenAIRE

    Bourgeois, Marine

    2013-01-01

    Ce billet a été publié dans le cadre de l'opération Têtes Chercheuses, qui permet à des étudiants ou chercheurs de grandes écoles, d'universités ou de centres de recherche partenaires de promouvoir des projets innovants en les rendant accessibles, et ainsi participer au débat public.

  19. Application d'une équation d'état à la simulation du comportement thermodynamique des fluides dans les gisements et dans les installations de surface Application of an Equation of State to Simulating the Thermodynamic Behaviour of Fluids in Reservoirs and Surface Installations

    Directory of Open Access Journals (Sweden)

    Jain C.

    2006-11-01

    Full Text Available La connaissance des propriétés thermodynamiques des fluides pétroliers, en particulier des masses volumiques et des coefficients d'équilibre liquide-vapeur, intervient à divers stades de la production : primaire, secondaire par in-jection de gaz (C02 ou hydrocarbures miscibles, vapeur d'eau, séparation, réseau de collecte et de transport. L'ampleur du domaine de pression et de température à l'intérieur duquel on a besoin de connaître les propriétés des huiles et des gaz à condensat, et le fait que la compo-sition d'ensemble des mélanges diphasiques ne cesse de varier au cours de leur déplacement soit dans les gisements, soit dans les installations d'exploitation, rendent mani-feste l'intérêt de pouvoir calculer ces propriétés, en évi-tant d'avoir recours à des travaux de laboratoire beaucoup trop importants. Pour résoudre ces problèmes, une nouvelle équation d'état appelée Redlich-Kwong Développée (RKD a été mise au point. Au cours de cet exposé, nous verrons que cette équation restitue les enveloppes diphasiques de l'équilibre liquide-vapeur avec une qualité au moins égale à celles des méthodes de Soave et de Peng-Robinson qui jouissent actuellement d'une grande notoriété. L'avantage de ce modèle sur ces dernières méthodes est l'évaluation simultanée des propriétés volumétriques des phases en présence avec une bonne précision, ce qui est d'une grande utilité pour l'application de ce modèle aux problèmes industriels. Knowing the thermodynamic properties of petroleum fluids, and in particular the density and liquid-vapor equilibrium coefficients, is important at different stages of production, i. e. primary production, secondary production by gas flooding (CO2 or miscible hydrocarbons, steam, separation, gathering network and transportation. The pressure and temperature range within which the oil and gas-condensate properties must be known coupled with the fact that the overall composition of

  20. Unconventional Gas Resources in the Paleozoic of Central Europe Ressources de gaz non conventionnels dans le Paléozoïque de l’Europe Centrale

    Directory of Open Access Journals (Sweden)

    Littke R.

    2011-05-01

    Full Text Available Whereas gas production from unconventional reserves has greatly increased over the past decades, there is still a largely unexplored potential in the Paleozoic of Central Europe. For this area, the paper summarizes some important aspects of the geology of tight sandstone gas reservoirs, gas shales and coalbed methane. Tight sandstones with low permeabilities are especially present in the Permian (Rotliegend Formation of The Netherlands and northern Germany, but also in the underlying Carboniferous. There is already active production from some of these reservoirs. Further development greatly depends on understanding of gas charge as well as the regional distribution of porosity and permeability which in turn depend on facies and diagenesis. In contrast exploration for gas shales is just at the very beginning. Whereas Mesozoic shales in the southern Lower Saxony Basin have to be regarded as prime targets due to thickness, maturity and organic matter content, there are additional targets in the Mississippian, but also in older rocks. Currently an international gas shale research programme (Gas shales in Europe, GASH gathers relevant data for these units. Coalbed methane exploration started already about 20 years ago in the Ruhr Basin, but was not successful at that time due to small flow rates. On the other hand, production from abandoned coal mines provided substantial amounts of gas. Due to the abundance of coal seams and the suitable maturity conditions and gas contents, there is a high potential for future substantial coalbed methane in the area. Alors que l’extraction du gaz naturel des gisements non conventionnels a fortement augmenté ces dernières dizaines d’années, un large potentiel de ressources reste inexploré dans les couches paléozoïques de l’Europe Centrale. Cet article présente, pour cette région, quelques aspects importants de la géologie des grès de faible perméabilité (tight gas sands, des gaz de schiste (gas

  1. No 3017. Resolution proposal aiming at creating an inquiry commission relative to the project of merger between Gaz de France and Suez, to the conditions of its preparation and announcement and to the consequences of Gaz de France privatization on users and on the energy market balance

    International Nuclear Information System (INIS)

    Balligand, J.P.; Ayrault, J.M.; Hollande, F.; Besson, E.; Migaud, D.; Emmanuelli, H.; Brottes, F.; Bataille, Ch.; Ducout, P.; Gaubert, J.; Habib, D.

    2006-04-01

    On February 25, 2006, the French government took the decision of merging together Gaz de France and Suez energy companies as an answer to Enel's project of takeover bid on Suez. This document wonders about: the real motivations of Gaz de France (the French gas utility) privatization, the possible intervention of public authorities in Enel and Veolia companies project of controlling the Suez group, the governing way of the share-holding government and the preservation of its industrial interests, and the consequences for consumers. Therefore, the creation of a parliamentary inquiry commission is requested to shade light on these different points and to give notice of any bad practices in this affair. (J.S.)

  2. Detector for the liquid carried over in a gas; Detecteur d'entrainement de liquide dans un gaz

    Energy Technology Data Exchange (ETDEWEB)

    Delisle, J P; Eperonnat, P; Lions, N [Commissariat a l' Energie Atomique, Cadarache (France). Centre d' Etudes Nucleaires

    1965-07-01

    This report describes an optical detector for the detection of a liquid carried over by a gas. The device is sensitive to a cumulated quantity of liquid equal to a few cubic millimetres and is capable of operating an alarm from a distance. The prototype was constructed and tested as detector for the oil leaking in the argon compressed by a diaphragm compressor. A patent for this apparatus under the number: P.V.954.703, has been deposited on 22.11.1963. (authors) [French] Ce rapport decrit un detecteur optique d'entrainement de liquide dans un gaz, sensible a une quantite cumulee de liquide entraine egale a quelques millimetres cubes. L'appareil peut actionner une alarme a distance. Le prototype a ete construit et essaye comme detecteur de fuites d'huile dans l'argon refoule par un compresseur a membranes. Une demande de brevet a ete deposee pour cet appareil sous le numero: P.V.954.703, le 22.11.1963. (auteur)

  3. Enhanced catalyst activity by decorating of Au on Ag@Cu2O nanoshell

    Science.gov (United States)

    Chen, Lei; Liu, Maomao; Zhao, Yue; Kou, Qiangwei; Wang, Yaxin; Liu, Yang; Zhang, Yongjun; Yang, Jinghai; Jung, Young Mee

    2018-03-01

    We successfully synthesized Au-decorated Ag@Cu2O heterostructures via a simple galvanic replacement method. As the Au precursor concentration increased, the density of the Au nanoparticles (NPs) on the Ag@Cu2O surface increased, which changed the catalytic activity of the Ag@Cu2O-Au structure. The combination of Au, Ag, and Cu2O exhibited excellent catalytic properties, which can further effect on the catalyst activity of the Ag@Cu2O-Au structure. In addition, the proposed Ag@Cu2O-Au nanocomposite was used to transform the organic, toxic pollutant, 4-nitrophenol (4-NP), into its nontoxic and medicinally important amino derivative via a catalytic reduction to optimize the material performance. The proposed Au-decorated Ag@Cu2O exhibited excellent catalytic activity, and the catalytic reduction time greatly decreased (5 min). Thus, three novel properties of Ag@Cu2O-Au, i.e., charge redistribution and transfer, adsorption, and catalytic reduction of organic pollutants, were ascertained for water remediation. The proposed catalytic properties have potential applications for photocatalysis and localized surface plasmon resonance (LSPR)- and peroxidase-like catalysis.

  4. Towards a laser fluence dependent nanostructuring of thin Au films on Si by nanosecond laser irradiation

    International Nuclear Information System (INIS)

    Ruffino, F.; Pugliara, A.; Carria, E.; Romano, L.; Bongiorno, C.; Fisicaro, G.; La Magna, A.; Spinella, C.; Grimaldi, M.G.

    2012-01-01

    Highlights: ► Au nanoclusters are produced by nanosecond laser irradiations of thin Au film on Si. ► The shape, size, and surface density of the Au nanoclusters are tunable by laser fluence. ► The formation dynamic of the Au nanoclusters under nanosecond laser irradiation is analyzed. - Abstract: In this work, we study the nanostructuring effects of nanosecond laser irradiations on 5 nm thick Au film sputter-deposited on Si. After deposition of Au on Si substrate, nanosecond laser irradiations were performed increasing the laser fluence from 750 to 1500 mJ/cm 2 . Several analyses techniques, such as Rutherford backscattering spectrometry, scanning electron microscopy, atomic force microscopy, and transmission electron microscopy were crossed to study the morphological evolution of the Au film as a function of laser fluence. In particular, the formation of Au nanoparticles was observed. The analyses allowed a quantitative evaluation of the evolution of the nanoparticles size, surface density, and shape as a function of the laser fluence. Therefore, a control the structural properties of the Au nanoparticles is reached, for example, for applications in Si nanowires growth or plasmonics.

  5. Detection of {alpha} particles using semiconductors. Application to the control of plutonium extraction; Detection des particules {alpha} par semiconducteurs application au controle de l'extraction du plutonium

    Energy Technology Data Exchange (ETDEWEB)

    Tanguy, J. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-03-01

    A study is made of a particles produced by thick sources, using either diffused junction or surface barrier semiconductor detectors for controlling continuously the plutonium extraction process. For this, a presenting apparatus is described in which the solutions to be analyzed flow in contact with the detector protected by a thin mica membrane. A method is described which gives a precise recording of the spectra and which thus allows the separation of two or more {alpha} emitters present in the same solution. This method has been applied to the measurement of {sup 239}Pu in the the presence of {sup 241}Am with an accuracy of {+-}5 per cent. In the second part of the report is considered the detection of plutonium in solutions of {beta} - {gamma} emitting fission products. Pile-up is reduced by using a fast amplification chain associated to totally depleted thin detectors. Under these conditions a few mg of {sup 239}Pu can be detected in solutions of fission products having an activity of 100 curies/liter. A method is given for discriminating {alpha} and {beta} particles, it is based on the difference in the collection times for the charges liberated by these particles in the detector. (author) [French] On etudie la detection de particules {alpha} issues de sources epaisses par detecteurs semiconducteurs a jonction diffusee ou a barriere de surface pour le controle continu du procede d'extraction du plutonium. A cet effet on decrit un appareil presentateur dans lequel les solutions a analyser circulent au contact du detecteur protege par une membrane mince de mica. On decrit une methode qui permet par le trace precis des spectres de separer deux ou plusieurs emetteurs {alpha} presents dans une meme solution. Cette methode a ete appliquee a la mesure du {sup 239}Pu en presence de {sup 241}Am avec une precision de {+-} 5 pour cent. Dans la deuxieme partie on traite de la detection du plutonium dans des solutions de produits de fission emetteurs {beta} and {gamma

  6. Gold nanoparticles production using reactor and cyclotron based methods in assessment of {sup 196,198}Au production yields by {sup 197}Au neutron absorption for therapeutic purposes

    Energy Technology Data Exchange (ETDEWEB)

    Khorshidi, Abdollah, E-mail: abkhorshidi@yahoo.com

    2016-11-01

    Medical nano-gold radioisotopes is produced regularly using high-flux nuclear reactors, and an accelerator-driven neutron activator can turn out higher yield of {sup 197}Au(n,γ){sup 196,198}Au reactions. Here, nano-gold production via radiative/neutron capture was investigated using irradiated Tehran Research Reactor flux and also simulated proton beam of Karaj cyclotron in Iran. {sup 197}Au nano-solution, including 20 nm shaped spherical gold and water, was irradiated under Tehran reactor flux at 2.5E + 13 n/cm{sup 2}/s for {sup 196,198}Au activity and production yield estimations. Meanwhile, the yield was examined using 30 MeV proton beam of Karaj cyclotron via simulated new neutron activator containing beryllium target, bismuth moderator around the target, and also PbF{sub 2} reflector enclosed the moderator region. Transmutation in {sup 197}Au nano-solution samples were explored at 15 and 25 cm distances from the target. The neutron flux behavior inside the water and bismuth moderators was investigated for nano-gold particles transmutation. The transport of fast neutrons inside bismuth material as heavy nuclei with a lesser lethargy can be contributed in enhanced nano-gold transmutation with long duration time than the water moderator in reactor-based method. Cyclotron-driven production of βeta-emitting radioisotopes for brachytherapy applications can complete the nano-gold production technology as a safer approach as compared to the reactor-based method. - Graphical abstract: This figure describes gold nanoparticles production via cyclotron based method. The aim of investigating is to estimate activity and saturation yield of {sup 197}Au(n,γ){sup 198}Au and {sup 197}Au(n,2n){sup 196}Au reactions using Karaj cyclotron available in Iran. The feasibility of a cyclotron-driven production of βeta-emitting radioisotopes was investigated for therapeutic applications via a new neutron activator design. - Highlights: • Nano-gold radioisotope production

  7. Contribution to the activation analysis of the rare gases. Contribution to the analysis of carbon monoxide and water vapour in gases (1963); Contribution a l'analyse par activation des gaz rares. Contribution a l'analyse de l'oxyde de carbone et de la vapeur d'eau dans les gaz (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Diebolt, J [Commisariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1963-07-15

    In the present work, we have applied radioactive analysis to the general technique of rare gas separation. This separation is carried out on active charcoal, at constant pressure. The desorption of the gas is caused by an increase in the initial temperature of adsorption. These separations are quantitative and can be confirmed by chemical analysis. The volumes of desorbed gas are measured by radioactive counting. We have also used radioactivation to study the reduction of palladous chloride by carbon monoxide. Since this reduction is quantitative, we can have a knowledge of the mass of palladium reduced by measuring its activity. We have used the property which have organic chlorides of being hydrolysed by water vapour and of liberating hydrochloric acid to study quantitatively the amount of water vapour which a gas contains. The hydrochloric acid formed is measured by activation of the chlorine in the acid. (author) [French] Dans les travaux que nous presentons, nous avons applique l'analyse par radioactivation, a la technique generale de separation des gaz rares. Cette separation est faite sur charbon active, a pression constante. La desorption des gaz est provoquee par une augmentation de la temperature initiale d'adsorption. Ces separations sont quantitatives, et peuvent etre exploitees par l'analyse chimique. Les volumes de gaz dedorbes sont mesures par comptage de la radioactivite. Nous avons egalement utilise la radioactivation pour l'etude de la reduction du chlorure palladeux par l'oxyde de carbone. Cette reduction etant quantitative, nous pouvons connaitre la masse de palladium reduit par la mesure de son activite. Nous avons exploite la propriete que possede un chlorure organique d'etre hydrolise par la vapeur d'eau et de liberer de l'acide chlorhydrique pour etudier quantitativement la vapeur d'eau contenue dans un gaz. L'acide chlorhydrique forme est mesure par l'activation du chlore de l'acide. (auteur)

  8. Construction of the core of the 'heavy water-gas' reactor EL 4; Structures du coeur du reacteur 'eau- lourde-gaz EL 4'

    Energy Technology Data Exchange (ETDEWEB)

    Bernard, J L; Foulquier, H; Thome, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    problem of thermal insulation around a zirconium alloy liner tube. The neutron absorption equivalent is about 1, 1 mm of Al, and the mean loss around 2 p. 100 of the thermal power of the reactor. The methods proposed have proved practicable as a result of important research and developments on automatic remote control for all the operations which make up the sequences of mounting, demounting and repairing of the construction components. In particular the possibilities opened up by the new techniques of welding tubes from the inside have been extended to other problems connected with the assembling of a reactor. (authors) [French] Le coeur de ce reacteur est constitue par une cuve contenant l'eau lourde, cuve traversee d'une serie de tubes de force dans lesquels circule le gaz caloporteur sous pression de 60 at. Les specifications de depart qui ont joue un role important dans la conception de ces structures concernent des aspects de securite de fonctionnement (chargement du combustible par les deux faces du reacteur, remplacement des structures sur les deux faces du reacteur), des necessites neutroniques (absorption des structures minimum, pas du reseau, diametre des tubes de force) et des considerations thermiques (temperature de sortie 500 C). Ces specifications ont entraine une disposition horizontale des tubes de force et des problemes d'encombrement tres delicats qui ont elimine (pour les dimensions d'EL 4) toute possibilite de recourir a des compensateurs de dilatation sur les tubes de force. II s'ensuit un dessin de cuve semi-rigide dans lequel les tubes de force contribuent pour une part importante a la resistance mecanique de l'ensemble en jouant le role de tirant, d'ou des contraintes elevees sur les jonctions et tubes de force (et le choix des alliages de zirconium). Les structures comprennent le tube de force, les jonctions, l'isolement thermique et le tube de guidage. On expose brievement les moyens d'essais mis en oeuvre et les performances de ces diverses

  9. Biological synthesis of Au nanoparticles using liquefied mash of cassava starch and their functionalization for enhanced hydrolysis of xylan by recombinant xylanase.

    Science.gov (United States)

    Zeng, Sumei; Du, Liangwei; Huang, Meiying; Feng, Jia-Xun

    2016-05-01

    Au nanoparticles (AuNPs) have shown the potential for a variety of applications due to their unique physical and chemical properties. In this study, a facile and affordable method for the synthesis of AuNPs via the liquefied mash of cassava starch has been described and the functionalized AuNPs by L-cysteine improved activity of recombinant xylanase was demonstrated. UV-Vis absorption spectroscopy, transmission electron microscopy, and zeta potential measurements were performed to characterize the AuNPs and monitor their synthesis. The presence of Au was confirmed by energy-dispersive X-ray spectroscopy (EDX) and the X-ray diffraction patterns showed that Au nanocrystals were face-centered cubic. The C=O stretching vibration in the Fourier transform infrared spectrum of AuNPs suggested that the hemiacetal C-OH of sugar molecules performed the reduction of Au³⁺ to Au⁰. The presence of C and O in the EDX spectrum and the negative zeta potential of AuNPs suggested that the biomolecules present in liquefied cassava mash were responsible for the stabilization of AuNPs. The surface of AuNPs was easily functionalized by L-cysteine, which improved the stability of AuNPs. Moreover, cysteine-functionalized AuNPs could significantly improve recombinant xylanase efficiency and stability.

  10. Some recent results in Au+Au collisions at AGS

    International Nuclear Information System (INIS)

    Chen, Z.

    1996-01-01

    Many interesting results have been obtained for Au + Au reactions at AGS. The basic information about the reaction dynamics comes from the hadronic distribution. and this article reviews the recent progress of these distributions in details. The proton rapidity distribution shows significantly increased stopping compared to lighter systems, implying the formation of a state of high baryon density. Unlike reactions at this energy induced by lighter heavy ions, at low m t - m 0 the proton invariant spectra deviate from a single exponential shape and become fear,. while pion spectra are found to rise in this region, with the π - spectra rising faster than the π + spectra. The inverse slope parameter increases faster for particles of larger mass as the number of participants in the reaction increases, an indication of increased effect of radial expansion in central collision. Anti-proton Needs have been measured recently, and unfortunately a comparison among current results from different experiments indicates discrepancy

  11. Fuel elements for pressurised-gas reactors; Elements combustibles des piles a gaz sous pression

    Energy Technology Data Exchange (ETDEWEB)

    Stohr, J A; Englander, M; Gauthron, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    The design and fabrication of fuel elements for the first CO{sub 2} pressurized reactors have induced to investigate: various cladding materials, natural uranium base fuels, canning processes. The main analogical tests used in connection with the fuel element study are described. These various tests have enabled, among others, the fabrication of the fuel element for the EL2 reactor. Lastly, future solutions for electrical power producing reactors are foreseen. (author)Fren. [French] L'etude et la realisation d'elements combustibles pour les premieres piles a CO{sub 2} sous pression ont conduit a examiner: les divers materiaux de gaine, les combustibles a base d'uranium naturel, les modes de gainage. Les principaux essais analogiques ayant servi au cours de l'etude de la cartouche sont decrits. Ces divers essais ont notamment permis la realisation de la cartouche de la pile EL2. Enfin sont envisagees les solutions futures pour les piles productrices d'energie electrique. (auteur)

  12. Nuclear spin of 185Au and hyperfine structure of 188Au

    International Nuclear Information System (INIS)

    Ekstroem, C.; Ingelman, S.; Wannberg, G.

    1977-03-01

    The nuclear spin of 185 Au, I = 5/2, and the hyperfine separation of 188 Au, Δγ = +- 2992(30) MHz, have been measured with the atomic-beam magnetic resonance method. The spin of 185 Au indicates a deformed nuclear shape in the ground state. The small magnetic moment of 188 Au is close in value to those of the heavier I = 1 gold isotopes 190 192 194 Au, being located in a typical transition region. (Auth.)

  13. Evolution of Self-Assembled Au NPs by Controlling Annealing Temperature and Dwelling Time on Sapphire (0001).

    Science.gov (United States)

    Lee, Jihoon; Pandey, Puran; Sui, Mao; Li, Ming-Yu; Zhang, Quanzhen; Kunwar, Sundar

    2015-12-01

    Au nanoparticles (NPs) have been utilized in a wide range of device applications as well as catalysts for the fabrication of nanopores and nanowires, in which the performance of the associated devices and morphology of nanopores and nanowires are strongly dependent on the size, density, and configuration of the Au NPs. In this paper, the evolution of the self-assembled Au nanostructures and NPs on sapphire (0001) is systematically investigated with the variation of annealing temperature (AT) and dwelling time (DT). At the low-temperature range between 300 and 600 °C, three distinct regimes of the Au nanostructure configuration are observed, i.e., the vermiform-like Au piles, irregular Au nano-mounds, and Au islands. Subsequently, being provided with relatively high thermal energy between 700 and 900 °C, the round dome-shaped Au NPs are fabricated based on the Volmer-Weber growth model. With the increased AT, the size of the Au NPs is gradually increased due to a more favorable surface diffusion while the density is gradually decreased as a compensation. On the other hand, with the increased DT, the size and density of Au NPs decrease due to the evaporation of Au at relatively high annealing temperature at 950 °C.

  14. Au nanoparticles attached carbon nanotubes as a high performance active element in field effect transistor

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Myeongsoon; Kim, Don, E-mail: donkim@pknu.ac.kr

    2016-08-15

    The Au nanoparticles attached carbon nanotubes (Au-CNTs), diameter ranged from 40 to 250 nm, were prepared and discussed their chemical and electrical properties. The shape and crystallinity of the carbon nanotubes (CNTs) phase depended main2ly on the diameter of CNTs (r{sub Au-CNT}). Highly crystalline, straight CNTs were observed when the r{sub Au-CNT} exceeded 80 nm, and less crystalline noodle-shaped CNTs were observed when the r{sub Au-CNT} was smaller than 80 nm. The crystallinity of the CNT phase was confirmed by analyzing the G and D bands in their Raman spectra and the electrical conductivities of the Au-CNTs. The electrical conductivity of the highly crystalline carbon phase of Au-CNTs (r{sub Au-CNT} = 250 nm) was ∼10{sup 4} S/cm. The back-gated field effect transistors (FETs) based on the Au-CNTs, which were assembled on a SiO{sub 2}/Si wafer using the dielectrophoresis technique, showed that the Au-CNTs would be a good functional electronic material for future electronic and sensing applications. The transconductance and hole mobility of the FETs, which were assembled with the highly crystalline Au-CNTs (r{sub Au-CNT} = 250 nm), reached to 3.6 × 10{sup −4} A/V and 3.1 × 10{sup 4} cm{sup 2}/V s, respectively. These values are in the middle of those of reported for single walled carbon nanotubes and graphene. However, we could not find any field effect in a CNTFET, which assembled without Au nanoparticles, through the same process. - Highlights: • The shape and crystallinity of the CNTs depended mainly on the diameter of CNTs. • The electrical conductivity of the highly crystalline Au-CNTs was ∼10{sup 4} S/cm. • The Au-CNT FET shows typical p-channel gate effect with the on/off ratio of ∼10{sup 4}. • The Au-CNT FET shows very high transconductance (g{sub m}) and carrier mobility (μ{sub h}).

  15. Modélisation d'une détente quasi-isotherme d'un gaz par contact direct avec un fluide caloporteur

    OpenAIRE

    Blaise , Mathilde; Maillet , Denis; Feidt , Michel; Alemany , Antoine; Forcinetti , Renato

    2015-01-01

    National audience; Les besoins en électricité sont croissants, cependant, les rejets thermiques industriels sont peu valorisés. La reconsidération des moteurs à apport de chaleur externe est un enjeu d'actualité pour la valorisation des rejets thermiques. Dans ces derniers, la phase de détente motrice offre des possibilités d'amélioration. L'idée ici est d'accompagner cette étape par un apport de chaleur par contact direct avec un fluide caloporteur. En effet, la détente d'un gaz entre une ha...

  16. Starting up a programme of atomic piles using compressed gas; Le demarrage d'un programme de piles atomiques a gaz comprime

    Energy Technology Data Exchange (ETDEWEB)

    Horowitz, J; Yvon, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1959-07-01

    1) An examination of the intellectual and material resources which have directed the French programme towards: a) the natural uranium and plutonium system, b) the use of compressed gas as heat transfer fluid (primary fluid). 2) The parts played in exploring the field by the pile EL2 and G1, EL2 a natural uranium, heavy water and compressed gas pile, G1 a natural uranium, graphite and atmospheric air pile. 3) Development of the neutronics of graphite piles: physical study of G1. 4) The examination of certain problem posed by centres equipped with natural uranium, graphite and compressed carbon dioxide piles: structure, special materials, fluid circuits, maximum efficiency. Economic aspects. 5) Aids to progress: a) piles for testing materials and for tests on canned fuel elements, b) laboratory and calculation facilities. 6) Possible new orientations of compressed gas piles: a) raising of the pressure, b) enriched fuel, c) higher temperatures, d) use of heavy water. (author) [French] 1) Examen des ressources - intellectuelles et materielles - qui ont oriente le programme fran is vers: a) la voie de l'uranium naturel et du plutonium; b) l'emploi comme fluide pour le transfert de la chaleur (fluide primaire) d'un gaz comprime. 2) Le role d'exploration des piles EL2 et G1, EL2 pile a uranium naturel, eau lourde et gaz comprime, G1 pile a uranium naturel, graphite et air atmospherique. 3) Developpement de la neutronique des piles a graphite: l'etude physique de G1. 4) Examen de certains problemes poses par les centrales equipees de piles a uranium naturel, graphite et gaz carbonique comprime: structure, materiaux speciaux, circuits de fluides, optimisation. Aspects economiques. 5) Les auxiliaires du progres: a) piles pour essai de materiaux et pour essais de cartouches, b) moyens de laboratoire et moyens de calcul. 6) Orientations nouvelles possibles des piles a gaz comprime: a) elevation de la pression, b) combustible enrichi, c) temperatures elevees, d) emploi de l

  17. Theoretical prediction of thermodynamic activities of liquid Au-Sn-X (X=Bi, Sb, Zn) solder systems

    Energy Technology Data Exchange (ETDEWEB)

    Awe, O.E., E-mail: draweoe2004@yahoo.com [Department of Physics, University of Ibadan, Ibadan (Nigeria); Department of Physics and Engineering Physics, Obafemi Awolowo University, Ile-Ife (Nigeria); Oshakuade, O.M. [Department of Physics, University of Ibadan, Ibadan (Nigeria)

    2017-02-15

    Molecular interaction volume model has been theoretically used to predict the thermodynamic activities of tin in Au-Sn-Bi and Au-Sn-Sb and the thermodynamic activity of zinc in Au-Sn-Zn at experimental temperatures 800 K, 873 K and 973 K, respectively. On the premise of agreement between the predicted and experimental values, we predicted the activities of the remaining two components in each of the three systems. This prediction was extended from three cross-sections to five cross-sections, and to temperature range 400–600 K, relevant for applications. Iso-activities were plotted. Results show that addition of tin reduces the tendency for chemical short range order in both Au-Sb and Au-Zn systems, while addition of gold and bismuth, respectively, reduce the tendency for chemical short range order in Sn-Sb and Au-Sn systems. Also, we found that, in the desired high-temperature region for applications, while a combination of chemical order and miscibility of components exist in both Au-Sn-Bi and Au-Sn-Zn systems, only chemical order exist in the Au-Sn-Sb system. Results, further show that increase in temperature reduces the phase separation tendency in Au-Sn-Bi system.

  18. The Hydrodynamic Characteristics of Cocurrent Downflow and Cocurrent Upflow Gas-Liquid-Solid Catalytic Fixed Bed Reactors: the Effect of Pressure Les caractéristiques hydrodynamiques des réacteurs gaz-liquide-solide à lit de catalyseur fixe à écoulement cocourant montant et descendant : l'influence de la pression

    Directory of Open Access Journals (Sweden)

    Wild G.

    2006-11-01

    ésultats de quelques années de recherches expérimentales sur les caractéristiques hydrodynamiques des réacteurs à écoulement cocourant ruisselant et enfin de réacteurs en cocourant montant. Au cours des dernières années, des résultats ont également pu être obtenus sous des pressions pouvant aller jusqu'à 8 MPa, les mesures étant faites à petite échelle (23 mm de diamètre dans une maquette froide. Différents liquides aqueux et organiques plus ou moins visqueux, éventuellement inhibiteurs de coalescence, 4 gaz et un certain nombre de particules plus ou moins mouillables non poreuses ont été utilisés. La rétention liquide a, dans tous les cas, été déterminée en mesurant la distribution des temps de séjour de la phase liquide, à l'aide de différents traceurs. Les conclusions suivantes ont pu être tirées : - Pour le régime à forte interaction, c'est l'inertie du gaz et des phases liquides qui constitue la cause principale de la dissipation d'énergie mécanique. Dans ce régime, les résultats obtenus en cocourant montant et descendant sont à peu près identiques. - La plupart des corrélations relevées dans la littérature ne permettent pas de prévoir l'influence de la pression sur la chute de pression ou la retenue liquide. - La viscosité du gaz n'influence pas l'hydrodynamique. Il est donc possible de simuler, par exemple, l'hydrogène sous forte pression par un autre gaz de même densité (à pression beaucoup plus basse. Une étude critique des corrélations et/ou des modèles de la littérature est présentée du point de vue de leur aptitude à représenter les différentes caractéristiques en fonction de la pression.

  19. Observation of dynamic water microadsorption on Au surface

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Xiaokang, E-mail: xiaokang.huang@tqs.com; Gupta, Gaurav; Gao, Weixiang; Tran, Van; Nguyen, Bang; McCormick, Eric; Cui, Yongjie; Yang, Yinbao; Hall, Craig; Isom, Harold [TriQuint Semiconductor, Inc., 500 W Renner Road, Richardson, Texas 75080 (United States)

    2014-05-15

    Experimental and theoretical research on water wettability, adsorption, and condensation on solid surfaces has been ongoing for many decades because of the availability of new materials, new detection and measurement techniques, novel applications, and different scales of dimensions. Au is a metal of special interest because it is chemically inert, has a high surface energy, is highly conductive, and has a relatively high melting point. It has wide applications in semiconductor integrated circuitry, microelectromechanical systems, microfluidics, biochips, jewelry, coinage, and even dental restoration. Therefore, its surface condition, wettability, wear resistance, lubrication, and friction attract a lot of attention from both scientists and engineers. In this paper, the authors experimentally investigated Au{sub 2}O{sub 3} growth, wettability, roughness, and adsorption utilizing atomic force microscopy, scanning electron microscopy, reflectance spectrometry, and contact angle measurement. Samples were made using a GaAs substrate. Utilizing a super-hydrophilic Au surface and the proper surface conditions of the surrounding GaAs, dynamic microadsorption of water on the Au surface was observed in a clean room environment. The Au surface area can be as small as 12 μm{sup 2}. The adsorbed water was collected by the GaAs groove structure and then redistributed around the structure. A model was developed to qualitatively describe the dynamic microadsorption process. The effective adsorption rate was estimated by modeling and experimental data. Devices for moisture collection and a liquid channel can be made by properly arranging the wettabilities or contact angles of different materials. These novel devices will be very useful in microfluid applications or biochips.

  20. L’apprentissage au CERN

    CERN Multimedia

    Staff Association

    2016-01-01

    En 1961, sur la base du constat que l’évolution du marché du travail nécessitait un besoin croissant de personnel qualifié, le 1er accord entre la République et canton de Genève et le CERN fut signé. Cet accord avait notamment pour objet la formation professionnelle de jeunes électroniciens et techniciens de laboratoires en physique. Le CERN, acteur local économique d’importance, soulignait par cet accord sa volonté de participer au développement économique et social local. Le 1er apprenti arriva au CERN en 1965. En 1971, le centre d’apprentissage fut créé ; il accueille aujourd’hui plus d’une vingtaine d’apprentis au total, à raison d’environ six nouveaux apprentis chaque année. Cet apprentissage est dédié aux jeunes âgés e...

  1. Experimental study of improvement of exchanged power in gases by catalytic dissociation: ammonia (1961); Etude experimentale de l'amelioration des echanges de chaleur avec les gaz par dissociation catalytique: ammoniac (1961)

    Energy Technology Data Exchange (ETDEWEB)

    Perroud, P [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires; De La Harpe, A [Centre National de la Recherche Scientifique(CNRS), 75 - Paris (France)

    1961-07-01

    Rates of ammonia dissociation and resulting coefficients of improvement of exchanged power have been measured in an annular channel under following conditions: mean wall temperature until 1500 deg. C (tungsten rod, diameter 3 mm), mass velocity until 11 g/cm{sup 2}.s and absolute pressure between 1.5 and 7 kg/cm{sup 2}. Rate of dissociation is mainly function of wall temperature and total mass flow rate of ammonia; it depends little on entrance gas temperature and is practically independent of pressure. Apparent coefficients of improvement of exchanged power under above conditions (including radiation) have reached 1.8; this maximum was obtained for a mean wall temperature of 1250 deg. C. These coefficients decrease when Reynolds number increases. Finally, a theoretical analysis of the phenomenon is given as well as possibilities of application. (authors) [French] Les taux de dissociation d'ammoniac et les coefficients d'amelioration de puissance echangee resultants ont ete mesures en espace annulaire dans les conditions suivantes: temperature moyenne de paroi jusqu'a 1500 deg. C (barreau de tungstene de diametre 3 mm), vitesse massique jusqu'a 11 g/cm{sup 2}.s et pression absolue comprise entre 1,5 et 7 kg/cm{sup 2}. Le taux de dissociation est surtout fonction de la temperature de paroi et du debit en masse total d'ammoniac; il depend peu de la temperature d'entree du gaz et est pratiquement independant de la pression. Les coefficients d'amelioration apparents de la puissance echangee dans les conditions d'experience (rayonnement compris) ont atteint 1,8. Ce maximum observe se place vers une temperature moyenne de la paroi de 1250 deg. C. Ces coefficients decroissent quand le nombre de Reynolds de l'ecoulement croit. Finalement, une analyse theorique du phenomene est donnee ainsi que les perspectives d'applications. (auteurs)

  2. Single-crystal Au microflakes modulated by amino acids and their sensing and catalytic properties.

    Science.gov (United States)

    Li, Mingjie; Wu, Xiaochen; Zhou, Jiyu; Kong, Qingshan; Li, Chaoxu

    2016-04-01

    Single-crystal Au microflakes with the planar area over 10(3)μm(2) (i.e. being accessible to the human eye resolution) were synthesized in an environment-friendly route by directing two-dimensional growth of Au nanocrystals into macroscopic scales with amino acids as both reducing agents and capping agents. Side groups of amino acids were found to be a determinant parameter to tune the dimension and size of Au single crystals. The successful synthesis of Au microflakes provides an unprecedented opportunity to bridge nanotechnology and macroscopic devices, and hereby to start a new scenario of exploring their unique properties and applications in optoelectronic devices and bio-sensing fields across multiple length scales. For example, Au microflakes respond to air humidity upon depositing on films of chitin nanofibrils, and sense various physiological molecules as electrode materials of biosensors. Copyright © 2016 Elsevier Inc. All rights reserved.

  3. Étude des équilibres thermodynamiques des réactions de gazéification en vue de l'optimisation du rapport vapeur/comburant injecté dans un gazogène souterrain Study of Thermodynamic Equilibria in Gasification Reactions So As to Optimise the Steam/Oxidizer Ratio Injected Into an Underground Gas Generator

    OpenAIRE

    Pirard J. P.

    2006-01-01

    Le but de cette étude est de déterminer sur la base des équilibres thermodynamiques des réactions de gazéification le rapport vapeur/comburant à injecter dans un gazogène fonctionnant sous pression pour optimaliser les compositions, les pouvoirs calorifiques, les rendements de gazéification et la consommation d'agent gazéifiant. The aim of this study is to determine, on the basis of the thermodynamic equilibria of gazification reactions, the steam/oxidizer ratio to be injected into a gas g...

  4. Liberalization of energy markets, reorganization of work and collective mobilization in the company. The case of Gaz de Bordeaux

    International Nuclear Information System (INIS)

    Dif-Pradalier, M.

    2009-01-01

    Formerly in a monopolistic situation and running on a politico-administrative mode, Gaz de Bordeaux is a network industry now part of a competitive market. The present case study of this local public utility is meant to identify the nature of its modernisation and to measure its effects as well on the system of social regulations and professional identities, as on the capacities of action and forms of appropriation/resistance developed by the various categories of actors within the company. From a methodological point of view, we pledged ourselves with a combination of qualitative and quantitative approaches, aiming at articulating analysis of the work being done with that of collective action, both considered as linked realities. As work gains in intensity, in both senses of productive pressure (do more in less time and with fewer staff) and interest (given the need expressed by every person to come true by the reality of its work), the company appears as disrespectful of the quality of work possible and the capacities mobilized by individuals that modern management precisely contributed to develop. Faced with this reorganisation of work, labor unions struggle to grasp the issues at stake in modern employment relationships and translate individual complaints in renewed collective claims. Despite increasing individual withdrawal behaviours, working collectives recompose on new bases. We therefore revisit the origin of suffering at work; from its contemporary mutations, we present evidence for what we believe is one of its current major problems: the one at stake around what employees call a 'well done work', at the very moment when management is concerned with quality. (author)

  5. High stability of the goldalloy fullerenes: A density functional theory investigation of M12@Au20 (M = Na, Al, Ag, Sc, Y, La, Lu, and Au) clusters

    International Nuclear Information System (INIS)

    Zhang Meng; Feng Xiao-Juan; Zhao Li-Xia; Zhang Hong-Yu; Luo You-Hua

    2012-01-01

    Discovering highly stable metal fullerenes such as the celebrated C 60 is interesting in cluster science as they have potential applications as building blocks in new nanostructures. We here investigated the structural and electronic properties of the fullerenes M 12 @Au 20 (M = Na, Al, Ag, Sc, Y, La, Lu, and Au), using a first-principles investigation with the density functional theory. It is found that these compound clusters possess a similar cage structure to the icosahedral Au 32 fullerene. La 12 @Au 20 is found to be particularly stable among these clusters. The binding energy of La 12 @Au 20 is 3.43 eV per atom, 1.05 eV larger than that in Au 32 . The highest occupied molecular orbital-lowest unoccupied molecular orbital (HOMO-LUMO) gap of La 12 @Au 20 is only 0.31 eV, suggesting that it should be relatively chemically reactive. (condensed matter: structural, mechanical, and thermal properties)

  6. Theoretical study on the photocatalytic properties of graphene oxide with single Au atom adsorption

    Science.gov (United States)

    Ju, Lin; Dai, Ying; Wei, Wei; Li, Mengmeng; Jin, Cui; Huang, Baibiao

    2018-03-01

    The photocatalytic properties of graphene oxide (GO) with single Au atom adsorption are studied via the first-principles calculations based on the density functional theory. The present study addresses the origin of enhancement in photocatalytic efficiency of GO derived from single Au atom depositing. Compared with the clean one, the work function of the single Au atom adsorbed GO is lowered due to the charge transfer from Au to GO, indicating enhanced surface activity. The Au atom plays as an electron trapping center and a mediating role in charge transfer from photon excited GO to target species. The photogenerated electron-hole pairs can be separated effectively. For the GO configuration with atomic Au dispersion, there are some states introduced in the band gap, which are predominantly composed of Au 6s states. Through the in-gap state, the photo-generated electron transfer from the valence band of clean GO to the conductive band more easily. In addition, the reduction of the gap in the system is also presented in the current work, which indicates that the single Au atom adsorption improves light absorption for the GO based photocatalyst. These theoretical results are valuable for the future applications of GO materials as photocatalyst for water splitting.

  7. Formation of Au nano-patterns on various substrates using simplified nano-transfer printing method

    Science.gov (United States)

    Kim, Jong-Woo; Yang, Ki-Yeon; Hong, Sung-Hoon; Lee, Heon

    2008-06-01

    For future device applications, fabrication of the metal nano-patterns on various substrates, such as Si wafer, non-planar glass lens and flexible plastic films become important. Among various nano-patterning technologies, nano-transfer print method is one of the simplest techniques to fabricate metal nano-patterns. In nano-transfer printing process, thin Au layer is deposited on flexible PDMS mold, containing surface protrusion patterns, and the Au layer is transferred from PDMS mold to various substrates due to the difference of bonding strength of Au layer to PDMS mold and to the substrate. For effective transfer of Au layer, self-assembled monolayer, which has strong bonding to Au, is deposited on the substrate as a glue layer. In this study, complicated SAM layer coating process was replaced to simple UV/ozone treatment, which can activates the surface and form the -OH radicals. Using simple UV/ozone treatments on both Au and substrate, Au nano-pattern can be successfully transferred to as large as 6 in. diameter Si wafer, without SAM coating process. High fidelity transfer of Au nano-patterns to non-planar glass lens and flexible PET film was also demonstrated.

  8. Transport characteristics in Au/pentacene/Au diodes

    Science.gov (United States)

    Hayashi, Toshiaki; Naka, Akiyoshi; Hiroki, Masanobu; Yokota, Tomoyuki; Someya, Takao; Fujiwara, Akira

    2018-03-01

    We have used scanning and transmission electron microscopes (SEM and TEM) to study the structure of a pentacene thin film grown on a Au layer with and shown that it consists of randomly oriented amorphous pentacene clusters. We have also investigated the transport properties of amorphous pentacene in a metal-semiconductor-metal (MSM) diode structure and shown that the current is logarithmically proportional to the square root of the applied voltage, which indicates that transport occurs as the result of hopping between localized sites randomly distributed in space and energy.

  9. Ortaçağlardan 21. Yüzyıla Gazâlî’nin Kozmolojisinin Batılı Alımlanışı

    OpenAIRE

    GRIFFEL, Frank

    2011-01-01

    İslam teolojisinin konuları arasında özellikle Gazâlî’nin kozmolojisi Batı’da oldukça dikkat çekmiştir. Rönesans dönemi ilim adamları Gazâlî’nin Filozofların Tutarsızlığı (Tehâfütü’l-felâ- sife) adlı eserinin 17. meselesinde filozofların nedensellik teorilerine yönelttiği eleştirilere aşinaydılar. İslam teolojisine dair akademik araştırmaların başladığı 19. yüzyılın ilk yarısında ilim adamları, Gazâlî’nin sözkonusu meselede nedensel ilişkilerin varlığını reddettiği sonucuna ulaştılar. Gazâlî’...

  10. Reduction of uranium and plutonium oxides by aluminum. Application to the recycling of plutonium; Reduction des oxydes d'uranium et de plutonium par l'aluminium application au recyclage du plutonium

    Energy Technology Data Exchange (ETDEWEB)

    Gallay, J [Commissariat a l' Energie Atomique, Valduc (France). Centre d' Etudes

    1968-07-01

    A process for treating plutonium oxide calcined at high temperatures (1000 to 2000 deg. C) with a view to recovering the metal consists in the reduction of this oxide dissolved in a mixture of aluminium, sodium and calcium fluorides by aluminium at about 1180 deg. C. The first part of the report presents the results of reduction tests carried out on the uranium oxides UO{sub 2} and U{sub 3}O{sub 8}; these are in agreement with the thermodynamic calculations of the exchange reaction at equilibrium. The second part describes the application of this method to plutonium oxides. The Pu-Al alloy obtained (60 per cent Pu) is then recycled in an aqueous medium. (author) [French] Un procede de traitement de l'oxyde de plutonium calcine a haute temperature (1000 deg. C a 2000 deg. C), en vue de la recuperation du metal, consiste a reduire cet oxyde dissous dans un melange de fluorures d'aluminium, de sodium et de calcium, par l'aluminium vers 1180 deg. C. Une premiere partie du rapport presente les resultats des essais de reduction des oxydes d'uranium UO{sub 2} et U{sub 3}O{sub 8}, en accord avec les resultats du calcul thermodynamique de la reaction d'echange a l'equilibre. Une seconde partie rend compte de l'application de cette methode a l'oxyde de plutonium. L'alliage Pu-Al obtenu (60 pour cent Pu) est ensuite recycle par voie aqueuse. (auteur)

  11. Magnesium and uranium ignition in different gaseous atmospheres; Inflammabilite du magnesium et de l'uranium dans l'air et le gaz carbonique

    Energy Technology Data Exchange (ETDEWEB)

    Darras, R; Baque, P; Leclercq, D [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    Magnesium, uranium and some of their alloys burning temperatures have been systematically determined in an air or carbon dioxide atmosphere, either dry or wet. Two different ways of heating have been used: either continuously rising up the temperature, or heating to and then maintaining a constant temperature. The results are clearly different in the two cases. Besides, if moisture has little effect on the magnesium burning temperatures in air, it does lower them by about 130-140 deg. C in CO{sub 2}. The differences of sight between the burning of magnesium and uranium have been noticed; this leads to distinguish between an 'ignition' and an 'inflammation'. (author) [French] Les temperatures auxquelles apparait la combustion vive du magnesium, de l'uranium et certains de leurs alliages ont ete determinees systematiquement dans l'air et le gaz carbonique, soit secs, soit humidifies. On a mis en evidence l'influence du mode de chauffage sur les resultats: soit montee en temperature continue, soit stabilisation a partir d'une certaine temperature. En outre, si la presence d'humidite affecte peu les temperatures de combustion vive du magnesium dans l'air, elle les abaisse de 130 a 140 deg. C dans le gaz carbonique. Les differences d'aspect entre la combustion vive du magnesium et de l'uranium ont egalement ete remarquees, ce qui amene notamment a distinguer une 'ignition' d'une 'inflammation'. (auteur)

  12. High-p$_{T}$ Tomography of d+Au and Au+Au at SPS, RHIC, and LHC

    CERN Document Server

    Vitev, I; Vitev, Ivan; Gyulassy, Miklos

    2002-01-01

    The interplay of nuclear effects on the p_T > 2 GeV inclusive hadron spectra in d+Au and Au+Au reactions at root(s) = 17, 200, 5500 GeV is compared to leading order perturbative QCD calculations for elementary p+p (p-bar+p) collisions. The competition between nuclear shadowing, Cronin effect, and jet energy loss due to medium-induced gluon radiation is predicted to lead to a striking energy dependence of the nuclear suppression/enhancement pattern in A+A reactions. We show that future d+Au data can used to disentangle the initial and final state effects.

  13. Electrochemical synthesis of mesoporous Pt-Au binary alloys with tunable compositions for enhancement of electrochemical performance.

    Science.gov (United States)

    Yamauchi, Yusuke; Tonegawa, Akihisa; Komatsu, Masaki; Wang, Hongjing; Wang, Liang; Nemoto, Yoshihiro; Suzuki, Norihiro; Kuroda, Kazuyuki

    2012-03-21

    Mesoporous Pt-Au binary alloys were electrochemically synthesized from lyotropic liquid crystals (LLCs) containing corresponding metal species. Two-dimensional exagonally ordered LLC templates were prepared on conductive substrates from diluted surfactant solutions including water, a nonionic surfactant, ethanol, and metal species by drop-coating. Electrochemical synthesis using such LLC templates enabled the preparation of ordered mesoporous Pt-Au binary alloys without phase segregation. The framework composition in the mesoporous Pt-Au alloy was controlled simply by changing the compositional ratios in the precursor solution. Mesoporous Pt-Au alloys with low Au content exhibited well-ordered 2D hexagonal mesostructures, reflecting those of the original templates. With increasing Au content, however, the mesostructural order gradually decreased, thereby reducing the electrochemically active surface area. Wide-angle X-ray diffraction profiles, X-ray photoelectron spectra, and elemental mapping showed that both Pt and Au were atomically distributed in the frameworks. The electrochemical stability of mesoporous Pt-Au alloys toward methanol oxidation was highly improved relative to that of nonporous Pt and mesoporous Pt films, suggesting that mesoporous Pt-Au alloy films are potentially applicable as electrocatalysts for direct methanol fuel cells. Also, mesoporous Pt-Au alloy electrodes showed a highly sensitive amperometric response for glucose molecules, which will be useful in next-generation enzyme-free glucose sensors.

  14. The influence of cyclic deposition and anneal on growth of isolated and well-dispersed Au nanoisland arrays

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Xin; Li, Hao, E-mail: liha@missouri.edu

    2015-12-01

    Highlights: • Isolated and well-dispersed Au nanoislands were prepared by cyclical deposition and anneal. • The morphology of Au nanoislands were shown to be influenced by the number of growth cycles. • SERS sensing application was shown to be viable with as-prepared Au nanoislands. - Abstract: Isolated and well-dispersed Au nanoisland arrays were prepared with sputter deposition and post-deposition anneal in a cyclic fashion. Scanning electron microscopy (SEM) characterization and associated image analysis in aspects of nanoisland size, coverage, circularity, and density were performed to investigate the influence of cyclic deposition and anneal (DAA) on the morphology of as-prepared Au nanoisland arrays. This study revealed that, given a fixed amount of Au deposition per cycle, increasing the number of DAA cycles drove Au nanoislands’ gradual growth that was interpreted with the increase of their size and coverage and decrease of their density and circularity. In addition, given a fixed amount of total Au deposition, dividing the growth process into more cycles was shown to lower the growth rate of Au nanoislands. Moreover, the as-prepared Au nanoisland arrays were demonstrated to be a viable option as surface-enhanced Raman spectroscopy (SERS) sensing platform whose SERS enhancement was found to be highly dependent upon the size of nanoislands.

  15. The influence of cyclic deposition and anneal on growth of isolated and well-dispersed Au nanoisland arrays

    International Nuclear Information System (INIS)

    Sun, Xin; Li, Hao

    2015-01-01

    Highlights: • Isolated and well-dispersed Au nanoislands were prepared by cyclical deposition and anneal. • The morphology of Au nanoislands were shown to be influenced by the number of growth cycles. • SERS sensing application was shown to be viable with as-prepared Au nanoislands. - Abstract: Isolated and well-dispersed Au nanoisland arrays were prepared with sputter deposition and post-deposition anneal in a cyclic fashion. Scanning electron microscopy (SEM) characterization and associated image analysis in aspects of nanoisland size, coverage, circularity, and density were performed to investigate the influence of cyclic deposition and anneal (DAA) on the morphology of as-prepared Au nanoisland arrays. This study revealed that, given a fixed amount of Au deposition per cycle, increasing the number of DAA cycles drove Au nanoislands’ gradual growth that was interpreted with the increase of their size and coverage and decrease of their density and circularity. In addition, given a fixed amount of total Au deposition, dividing the growth process into more cycles was shown to lower the growth rate of Au nanoislands. Moreover, the as-prepared Au nanoisland arrays were demonstrated to be a viable option as surface-enhanced Raman spectroscopy (SERS) sensing platform whose SERS enhancement was found to be highly dependent upon the size of nanoislands.

  16. Configuration dependent deformation in 183Au

    International Nuclear Information System (INIS)

    Joshi, P.; Kumar, A.; Govil, I.M.; Mukherjee, G.; Singh, R.P.; Muralithar, S.; Bhowmik, R.K.

    1998-01-01

    The lifetime measurements in 183 Au nucleus were carried in order to probe the deformation properties of the band built on the i 3/2 and h 9/2 configurations. The nucleus of 183 Au was populated using a reaction 28 Si( 159 Tb,4n) 183 Au at a beam energy of 140 MeV. Lifetime measurements were carried out using Recoil Distance Measurements (RDM) method

  17. A general and high-yield galvanic displacement approach to Au-M (M = Au, Pd, and Pt) core-shell nanostructures with porous shells and enhanced electrocatalytic performances.

    Science.gov (United States)

    Kuai, Long; Geng, Baoyou; Wang, Shaozhen; Sang, Yan

    2012-07-23

    In this work, we utilize the galvanic displacement synthesis and make it a general and efficient method for the preparation of Au-M (M = Au, Pd, and Pt) core-shell nanostructures with porous shells, which consist of multilayer nanoparticles. The method is generally applicable to the preparation of Au-Au, Au-Pd, and Au-Pt core-shell nanostructures with typical porous shells. Moreover, the Au-Au isomeric core-shell nanostructure is reported for the first time. The lower oxidation states of Au(I), Pd(II), and Pt(II) are supposed to contribute to the formation of porous core-shell nanostructures instead of yolk-shell nanostructures. The electrocatalytic ethanol oxidation and oxygen reduction reaction (ORR) performance of porous Au-Pd core-shell nanostructures are assessed as a typical example for the investigation of the advantages of the obtained core-shell nanostructures. As expected, the Au-Pd core-shell nanostructure indeed exhibits a significantly reduced overpotential (the peak potential is shifted in the positive direction by 44 mV and 32 mV), a much improved CO tolerance (I(f)/I(b) is 3.6 and 1.63 times higher), and an enhanced catalytic stability in comparison with Pd nanoparticles and Pt/C catalysts. Thus, porous Au-M (M = Au, Pd, and Pt) core-shell nanostructures may provide many opportunities in the fields of organic catalysis, direct alcohol fuel cells, surface-enhanced Raman scattering, and so forth. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. An experimental study of the thermal conductivity: application of EST 205 borehole of Meuse/Haute Marne site (ANDRA); Etude experimentale de la conductivite thermique: application au forage EST 205 du site de Meuse/Haute Marne (ANDRA)

    Energy Technology Data Exchange (ETDEWEB)

    Jorand, R

    2006-10-15

    The determination of the thermal properties of clayey rocks is fundamental for predicting the behaviour a radioactive waste geological repository, and geothermal and oil reservoirs. The main objectives of this thesis work were to 1) better understand the effects of the parameters controlling the thermal conductivity, 2) study to which extent the laboratory measurements can be extrapolated to the field, and 3) find relationships between the thermal conductivity and other quantities easier to measure on the field, e.g. the P- and S- wave velocities. The study was conducted on 24 cores of marls carbonates and argillites coming from the EST205 borehole of the M/HM site (ANDRA). After a complete characterisation of the samples, their thermal conductivities were measured using a stationary method. The borehole was drilled with a special oil-based mud to avoid damaging the argillites, and many logs were available. Hence, it is ideal to study the properties of clayey rocks and compare them with field data. The results show the major effect of the microstructure (mainly the particles orientation), which causes the important anisotropy of the thermal conductivity in the marls and argillites. For all lithologies, linear relationships between the conductivity and the P- and S- wave velocities were obtained. The application of this experimental law to the sonic log helped building a synthetic log of thermal conductivity. Finally, we developed a heat probe, which allows measurements in function of temperature and saturation. We showed with this method that the thermal conductivity increases quasi-linearly with the saturation in a sandstone and a carbonate samples. (author)

  19. Global dynamics of shaft lines of turbo-machineries coupled to surrounding fluids: application to the case of fluid sheets; Dynamique globale des lignes d'arbres de turbomachines couplees aux fluides environnants: application au cas des lames fluides

    Energy Technology Data Exchange (ETDEWEB)

    Lornage, D.

    2001-12-15

    Shaft lines of turbo-machineries have to stand increasing reliability, efficiency and safety requirements. A precise modeling of the rotating parts with all possible coupling has become necessary. In this context, this work aims to develop a global modeling of rotating wheel/shaft system inside a surrounding fluid in order to foresee its dynamical behaviour. The use and advantage of Eulerian, Lagrangian and mixed (arbitrary Lagrangian Eulerian - ALE) formulations is recalled first. A bibliographic synthesis of the classical techniques used in structure mechanics and of coupling techniques for rotating machines is presented. The coupling technique retained is presented. It uses fluid and structure models independently developed and validated. The structure domain is discretized by the finite-element method. The fluid domain is discretized by the finite-difference method taking into consideration the hypotheses linked with thin films. A modal base projection combined with a mesh at the fluid-structure interface allows an efficient, adaptable and evolutive coupling. Finally, the method is applied to 3 test-cases. The first two ones comprise a shaft/disc system coupled to a fluid sheet between the disc and the casing and to an hydrodynamic bearing. Both cases allow a first validation of the coupling method. The third case aims to study a structure closer to a real system made of a shaft and a wheel coupled to a fluid sheet between a flange and a casing. These three applications allow to show the trends linked with the fluid effects and the coupling between the flexible sub-parts of the structure. (J.S.)

  20. Predicted Habitat Suitability for Montipora Corals in the Au'au Channel Region

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This raster denotes predicted habitat suitability for Montipora in the Au'au Channel region. Maximum Entropy (MaxEnt) modeling software was used to create this...

  1. Predicted Habitat Suitability for Porites in the Au'au Channel Region

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This raster denotes predicted habitat suitability for Porites in the Au'au Channel region. Maximum Entropy (MaxEnt) modeling software was used to create this...

  2. Predicted Habitat Suitability for Leptoseris Corals in the Au'au Channel Region

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This raster denotes predicted habitat suitability for Leptoseris in the Au'au Channel region. Maximum Entropy (MaxEnt) modeling software was used to create this...

  3. Predicted Habitat Suitability for Leptoseris in the Au'au Channel Region

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This raster denotes predicted habitat suitability for Leptoseris in the Au'au Channel region. Maximum Entropy (MaxEnt) modeling software was used to create this...

  4. Predicted Habitat Suitability for All Mesophotic Corals in the Au'au Channel Region

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This raster denotes predicted habitat suitability for all mesophotic corals in the Au'au Channel region. Maximum Entropy (MaxEnt) modeling software was used to...

  5. Synthesis of nir-sensitive Au-Au{sub 2}S nanocolloids for drug delivery

    Energy Technology Data Exchange (ETDEWEB)

    Ren, L.; Chow, G.M

    2003-01-15

    Near IR (NIR) sensitive Au-Au{sub 2}S nanocolloids were prepared by mixing HAuCl{sub 4} and Na{sub 2}S in aqueous solutions. An anti-tumor drug, cis-platin, was adsorbed onto Au-Au{sub 2}S nanoparticle surface via the 11-mercaptoundecanoic acid (MUA) layers. The results show that the degree of adsorption of cis-platin onto Au-Au{sub 2}S nanoparticles was controlled by the solution pH value, and the drug release was sensitive to near-infrared irradiation. The cis-platin-loaded Au-Au{sub 2}S nanocolloids can be potentially applied as NIR activated drug delivery carrier.

  6. Successful synthesis and thermal stability of immiscible metal Au-Rh, Au-Ir andAu-Ir-Rh nanoalloys

    Science.gov (United States)

    Shubin, Yury; Plyusnin, Pavel; Sharafutdinov, Marat; Makotchenko, Evgenia; Korenev, Sergey

    2017-05-01

    We successfully prepared face-centred cubic nanoalloys in systems of Au-Ir, Au-Rh and Au-Ir-Rh, with large bulk miscibility gaps, in one-run reactions under thermal decomposition of specially synthesised single-source precursors, namely, [AuEn2][Ir(NO2)6], [AuEn2][Ir(NO2)6] х [Rh(NO2)6]1-х and [AuEn2][Rh(NO2)6]. The precursors employed contain all desired metals ‘mixed’ at the atomic level, thus providing significant advantages for obtaining alloys. The observations using high-resolution transmission electron microscopy show that the nanoalloy structures are composed of well-dispersed aggregates of crystalline domains with a mean size of 5 ± 3 nm. Еnergy dispersive x-ray spectroscopy and x-ray powder diffraction (XRD) measurements confirm the formation of AuIr, AuRh, AuIr0.75Rh0.25, AuIr0.50Rh0.50 and AuIr0.25Rh0.75 metastable solid solutions. In situ high-temperature synchrotron XRD (HTXRD) was used to study the formation mechanism of nanoalloys. The observed transformations are described by the ‘conversion chemistry’ mechanism characterised by the primary development of particles comprising atoms of only one type, followed by a chemical reaction resulting in the final formation of a nanoalloy. The obtained metastable nanoalloys exhibit essential thermal stability. Exposure to 180 °C for 30 h does not cause any dealloying process.

  7. Thiol-PEG-carboxyl-stabilized Fe{sub 2}O{sub 3}/Au nanoparticles targeted to CD105: Synthesis, characterization and application in MR imaging of tumor angiogenesis

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Song; Gong, Mingfu; Zhang, Dong; Yang, Hua [Department of Radiology, Xinqiao Hospital, Third Military Medical University, Chongqing 400037 (China); Gao, Fabao [Department of Radiology, West China Hospital, Sichuan University, Chengdu 610041 (China); Zou, Liguang, E-mail: zlgxqyy@163.com [Department of Radiology, Xinqiao Hospital, Third Military Medical University, Chongqing 400037 (China)

    2014-07-15

    Objective: To detect tumor angiogenesis in tumor-bearing mice using thiol-PEG-carboxyl-stabilized Fe{sub 2}O{sub 3}/Au nanoparticles targeted to CD105 on magnetic resonance imaging (MRI). Methods: Fe{sub 2}O{sub 3}/Au nanoparticles (hybrids) were prepared by reducing Au{sup 3+} on the surface of Fe{sub 2}O{sub 3} nanoparticles. Hybrids were stabilized with thiol-PEG-carboxyl via the Au–S covalent bond, and further conjugated with anti-CD105 antibodies through amide linkages. Characteristics of the hybrid-PEG-CD105 nanoparticles were evaluated. Using these nanoparticles, the labeling specificity of human umbilical vein endothelial cells (HUVECs) was evaluated in vitro. MRI T2*-weighted images were obtained at different time points after intravenous administration of the hybrid-PEG-CD105 nanoparticles in the tumor-bearing mice. After MR imaging, the breast cancer xenografts were immediately resected for immunohistochemistry staining and Prussian blue staining to measure the tumor microvessel density (MVD) and evaluate the labeling of blood microvessels by the hybrid-PEG-CD105 nanoparticles in vivo. Results: The mean diameter of the hybrid-PEG-CD105 nanoparticles was 56.6 ± 8.0 nm, as measured by transmission electron microscopy (TEM). Immune activity of the hybrid-PEG-CD105 nanoparticles was 53% of that of the anti-CD105 antibody, as detected by enzyme-linked immunosorbent assay (ELISA). The specific binding of HUVECs with the hybrid-PEG-CD105 nanoparticles was proved by immunostaining and Prussian blue staining in vitro. For breast cancer xenografts, the combination of the hybrid-PEG-CD105 nanoparticles with blood microvessels was detectable by MRI after 60 min administration of the contrast agent. The T2* relative signal intensity (SI{sub R}) was positively correlated with the tumor MVD (R{sup 2} = 0.8972). Conclusion: Anti-CD105 antibody-coupled, thiol-PEG-carboxyl-stabilized core–shell Fe{sub 2}O{sub 3}/Au nanoparticles can efficiently target CD105 expressed

  8. Split resonance modes of a AuBRC plasmonic nanosystem caused by the coupling effect

    International Nuclear Information System (INIS)

    Ni, Yuan; Kan, Caixia; Xu, Haiying; Wang, Changshun

    2016-01-01

    A plasmonic nanosystem can give rise to particular optical responses due to a coupling effect. In this work, we investigate the optical properties and field distributions of a novel ‘matrioska’ nanocavity structure composed of a Au nanorod (AuNR) within a nanobox (AuNB) via finite-difference time-domain (FDTD) simulation. This nanocavity can be fabricated by a two-step wet-chemical method. The multiple SPR modes of optical spectrum for nanocavity are caused by the strong interaction between the AuNR-core and AuNB-shell when the incident light is perpendicular or parallel to the long axis of the Au box/rod nanocavity (AuBRC). The SPR modes are known as the dipole–dipole bonding resonance mode in the lower-energy region and the antibonding resonance mode in the higher-energy region. It is proposed that AuBRC can escape the orientation confinement of AuNR because the multiple modes occur and provide a potential application for the enhancement of the photoluminescence signal. Additionally, the SPR modes red-shift with increasing the offset of the AuNR-core, whereas the SPR mode dramatically blue-shifts when the conductive coupling is formed. The intense ‘hot-spot’ could be induced within a small interaction region in the conductive coupled system. The SPR line-shape of high quality would also be promoted. The SPR is highly sensitive to the medium, which is promising in the sensing and detecting devices. (paper)

  9. The Electronic Properties and L3 XANES of Au and Nano-Au

    International Nuclear Information System (INIS)

    Yiu, Y.M.; Zhang, P.; Sham, T.K.

    2004-01-01

    The electronic properties of Au crystal and nano Au have been investigated by theory and experiment. Molecularly capped nano-Au was synthesized using the two-phase method. Au nano-particles have been characterized by X-Ray Diffraction (XRD) and Transmission Electron Microscopy (TEM). They retain the fcc crystal structure. Their sizes have been determined to be in a range from 5.5 nm to 1.7 nm. The L3 X-ray Absorption Near Edge Structure (XANES) of nano-Au and Au foil have been recorded using synchrotron radiation, and examined by theoretical calculation based on the first principles. Both theory and experiment show that the nano-Au particles have essentially all the Au L3 XANES features of bulk Au in the near edge region with less pronounced resonance peaks. It is also shown that nano Au exhibits lower 4f binding energy than bulk Au in good agreement with quantum confined Au systems reported previously.

  10. Gas loop - continuous measurement of thermal and fast neutron fluxes; Boucle a gaz - mesure continue de flux de neutrons thermiques et rapides

    Energy Technology Data Exchange (ETDEWEB)

    Droulers, Y; Pleyber, G; Sciers, P; Maurin, G [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1964-07-01

    The measurement method described in this report can be applied both to thermal and fast neutron fluxes. A description is given of two practical applications in each of these two domains. This method is particularly suitable for measurements carried out on 'loop' type equipment. The measurement of the relative flux variations are carried out with an accuracy of 5 per cent. The choice of the shape of the gas circuit leaves a considerable amount of liberty for the adaptation of the measurement circuit to the experimental conditions. (authors) [French] La methode de mesure defrite dans ce rapport s1 applique aussi bien au flux de neutrons thermiques, qu'au flux de neutrons rapides. On donne la description de deux realisations pratiques dans chacun de ces domaines. Cette methode est particulierement adaptee a des mesures effectuees sur des dispositifs du type 'boucle'. La mesure des variations relatives de flux se fait avec une precision de 5 pour cent. Le choix de la configuration du circuit gazeux donne une grande souplesse dans l'adaptation du circuit de mesure aux conditions experimentales. (auteurs)

  11. Au-Pt-Au nanoraspberry structures used for mercury ion detection

    Science.gov (United States)

    Huang, Jiang-Hao; Huang, Shuai; Wen, Xiaoyan; Li, Min; Lu, Haifei

    2017-12-01

    Detection of Hg2+ with high sensitivity is of great significance in the biochemical sensing field. Quantitative of Hg2+ was realized based on the influence of Hg2+ on the UV-vis absorption performance of Au-Pt-Au core-shell nanoraspberry (APA)-rhodamine-6G (R6G) structure. First, APA sol was added into R6G indicator solution and the UV-vis absorption signal intensity of R6G was evidently promoted. The signal intensity monotonously increased as more APA sol was added. However, when HgCl2 solution was introduced, the signal intensity declined. A linear relationship between Hg2+ concentration and signal intensity at 527 nm was revealed, based on which quantitative determination of Hg2+ could be realized. Hg2+ detection sensitivity was measured to be 0.031 a.u./M with a limit of detection of 10-7 M and the response time was 20 s. A high Hg2+ detection selectivity over Cu2+, Na+, Li+, and K+ was demonstrated. Due to its simplicity and high sensitivity, the proposed method could find an extensive application prospect in the Hg2+ detection field.

  12. Séparation des mélanges eau-alcool à l'aide du CO2 supercritique : application au mélange éthanol eau Separation of Water-Alcohol Mixtures by Supercritical CO2: Application of the Ethanol- Water Mixture

    Directory of Open Access Journals (Sweden)

    Fogel W.

    2006-11-01

    Full Text Available Les marchés accessibles à la technique d'extraction supercritique utilisant le CO2 seront plutôt orientés vers les alcools dérivés de la pétrochimie (isopropanol, butanol secondaire ou du gaz de synthèse (mélange d'alcools allant de l'éthanol à l'hexanol que vers les produits issus des fermentations pour lesquels la sélectivité de la séparation est théoriquement insuffisante et la concentration en alcool dans le moût fermenté trop faible. Markets for the supercritical extraction technique using CO2 will mainly be aimed for alcohols derived from petrochemicals (isopropanol, secondary butanol or from synthetic gas (mixture of alcohols ranging from ethanol to hexanol rather than for products from fermentations for which separation selectivity is theoretically insufficient and the alcohol concentration in the wort much too weak.

  13. 2001-2003 ''public utility'' contract between the French government and Gaz de France; Contrat de ''service public'' 2001-2003 entre l'etat et Gaz de France

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    The ''public utility'' contract aims at specifying the actions of Gaz de France (GdF), the French gas utility, in terms of national development and public utility presence at the local scale. It extends and completes the 'contract of group' established between the government and GdF in the domain of quality of the services offered to clients, development of gas infrastructures and extension of gas supplies, and sustainable development. (J.S.)

  14. Travailler avec Windows 7 au CERN (FR)

    CERN Multimedia

    CERN. Geneva

    2010-01-01

    Vue d'ensemble des nouveaux concepts et des changements dans l'interface utilisateur survenus dans Windows 7 depuis les versions antérieures de Windows (XP ou Vista). La mise à disposition de Windows 7 au CERN et son intégration dans l’infrastructure de Windows au CERN seront présentées.

  15. Becoming independent through au pair migration

    DEFF Research Database (Denmark)

    Dalgas, Karina Märcher

    2015-01-01

    . This article argues that, despite this critique, au pairing does play an important formative role for young Filipinas because it opens up for experiences abroad that enable them to be recognised as independent adults in Philippine society. Rather than autonomy, however, au pairs define their independence...

  16. Study of Au+Au relativistic collisions with the Fopi-Phase I detector; Etude des collisions relativistes Au+Au avec le detecteur Fopi-Phase I

    Energy Technology Data Exchange (ETDEWEB)

    Dupieux, P

    1995-01-01

    Au+Au relativistic collisions, in a 100-1000 MeV energy domain per nucleon, are described. Experiments have been carried out with the SIS accelerator at GSI/Darmstadt. Data are analysed with the FOPI-phase I detector. These data are compared with IQMD model (Isospin Quantum Molecular Dynamics) Predictions. (S.G). 80 refs., 77 figs., 5 tabs.

  17. English for au pairs the au pair's guide to learning English

    CERN Document Server

    Curtis, Lucy

    2014-01-01

    English for Au Pairs has interlinked stories about a group of au pairs new to England. Marta, an 18-year-old from Poland arrives in the UK to work as an au pair. Throughout her year-long stay she has many different experiences - some bad, some good - but with the support of her host family she finds new friends and improves her English. English for Au Pairs offers insight into the joys and difficulties of being an au pair while at the same time reinforcing English language learning through grammar explanations and exercises.

  18. Ecoulements diphasiques gaz-liquide à poches et à bouchons en conduites Two-Phase Gas-Liquid Slug Flow in Pipes

    Directory of Open Access Journals (Sweden)

    Ferschneider G.

    2006-11-01

    Full Text Available Les écoulements diphasiques gaz-liquide ont été étudiés afin de contribuer à développer des modèles de calculs prédictifs des pertes de charge dans les conduites de production des bruts pétroliers. Les expériences nécessaires ont été réalisées sur la boucle diphasique de Boussens dans les conditions suivantes représentatives des conditions industrielles : diamètre 6 , longueur 120 m, disposition de la conduite horizontale ou faiblement ascendante, couple de fluide gaz naturel-huile légère. Le gradient de pression, le contenu global, et la distribution locale des phases ont été mesurés. Le traitement des équations de conservation phasique intégrées sur la section par différents types de moyennes a permis de développer un modèle cellulaire qui inclue un nombre limité d'équations constitutives nécessaires à sa fermeture. Ce modèle prédétermine convenablement le gradient de pression, le contenu gaz global et la longueur des poches et des bouchons. Two-phase gas-liquid flows were analyzed so as to develop models for prediction of pressure drops in crude-oil production lines. The experiments were performed on the two-phase loop at Boussens under the following representative industrial conditions: 6 diameter, 120 m length, horizontal or slightly rising pipe, couple of fluids natural gas and light oil. The pressure gradient, average content and local phase distribution were measured. Conservation phase equations integrated along the cross-section were processed by different time-averaged operators so as to develop a cellular model including a limited number of constitutive equations required for its closure. This model suitably predetermines the pressure gradient, the average gas content and the length of gas and liquid slug.

  19. The pulsed-gas tube, statement and perspectives; Le tube a gaz pulse, bilan et perspectives

    Energy Technology Data Exchange (ETDEWEB)

    Domblides, J P; Neveau, P; Castaing-Lasvignottes, J [Laboratoire du froid du CNAM, 75 - Paris (France)

    1998-12-31

    The pulsed-gas tube has several advantages with respect to the other types of cryo-refrigerating machineries classically used to reach very low temperatures: no mobile parts moving at very low temperatures and no vibrations. However, this system discovered in 1963 is handicapped by its lack of power and by its low energy efficiency. Todays researches about pulsed-gas tubes concern: the technical adaptation of existing systems to applications where its simplicity makes it competitive, the improvement of its energetic performances (refrigerating power and range of temperatures of use), and the development of numerical models in order to better understand the functioning of the system and to optimize it. (J.S.) 19 refs.

  20. The pulsed-gas tube, statement and perspectives; Le tube a gaz pulse, bilan et perspectives

    Energy Technology Data Exchange (ETDEWEB)

    Domblides, J.P.; Neveau, P.; Castaing-Lasvignottes, J. [Laboratoire du froid du CNAM, 75 - Paris (France)

    1997-12-31

    The pulsed-gas tube has several advantages with respect to the other types of cryo-refrigerating machineries classically used to reach very low temperatures: no mobile parts moving at very low temperatures and no vibrations. However, this system discovered in 1963 is handicapped by its lack of power and by its low energy efficiency. Todays researches about pulsed-gas tubes concern: the technical adaptation of existing systems to applications where its simplicity makes it competitive, the improvement of its energetic performances (refrigerating power and range of temperatures of use), and the development of numerical models in order to better understand the functioning of the system and to optimize it. (J.S.) 19 refs.

  1. Developing an aqueous approach for synthesizing Au and M@Au (M = Pd, CuPt) hybrid nanostars with plasmonic properties

    Science.gov (United States)

    Du, Jingshan; Yu, Junjie; Xiong, Yalin; Lin, Zhuoqing; Zhang, Hui; Yang, Deren

    Anisotropic Au nanoparticles show unique localized surface plasmon resonance (LSPR) properties, which make it attractive in optical, sensing, and biomedical applications. In this contribution, we report a general and facile strategy towards aqueous synthesis of Au and M@Au (M = Pd, CuPt) hybrid nanostars by reducing HAuCl4 with ethanolamine in the presence of cetyltrimethylammonium bromide (CTAB). According to electron microscopic observation and spectral monitoring, we found that the layered epitaxial growth mode (i.e., Frank-van der Merwe mechanism) contributes to the enlargement of the core, while, the random attachment of Au nanoclusters onto the cores accounts for the formation of the branches. Both of them are indispensable for the formation of the nanostars. The LSPR properties of the Au nanoparticles have been well investigated with morphology control via precursor amount and growth temperature. The Au nanostars showed improved surface-enhanced Raman spectroscopy (SERS) performance for rhodamine 6G due to their sharp edges and tips, which were therefore confirmed as good SERS substrate to detect trace amount of molecules.

  2. Theoretical prediction of the noble gas complexes HeAuF and NeAuF

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    Ab initio calculations were carried out to investigate the structures and the stability of the noble gas complexes HeAuF and NeAuF through MP2 and CCSD(T) methods.The HeAuF was predicted to have a linear structure with weak He-Au covalent bonding,the distance of which is closer to the covalent limit in comparison with the corresponding van der Waals limit.The dissociation energy with respect to He + AuF was found to be 24 and 26 kJ·mol-1 at the CCSD(T)/basis set B and B’ levels,respectively.However,similar calculations for NeAuF indicate that NeAuF is not a stable species.

  3. Au, Ag and Au:Ag colloidal nanoparticles synthesized by pulsed laser ablation as SERS substrates

    Directory of Open Access Journals (Sweden)

    M. Vinod

    2014-12-01

    Full Text Available Chemically pure colloidal suspensions of gold and silver nanoparticles were synthesized using pulsed laser ablation. The dependence of laser fluence on the surface plasmon characteristics of the nanoparticles was investigated. Au:Ag colloidal suspensions were prepared by mixing highly monodisperse Au and Ag nanocolloids. The plasmon band of these mixtures was found to be highly sensitive to Au:Ag concentration ratio and wavelength of the laser beam used in the ablation process. The Au:Ag mixture consists of almost spherical shaped nanostructures with a tendency to join with adjacent ones. The surface enhanced Raman scattering activity of the Au, Ag and Au:Ag colloidal suspensions was tested using crystal violet as probe molecules. Enhancement in Raman signal obtained with Au:Ag substrates was found to be promising and strongly depends on its plasmon characteristics.

  4. Synthesis of triangular Au core-Ag shell nanoparticles

    International Nuclear Information System (INIS)

    Rai, Akhilesh; Chaudhary, Minakshi; Ahmad, Absar; Bhargava, Suresh; Sastry, Murali

    2007-01-01

    In this paper, we demonstrate a simple and reproducible method for the synthesis of triangular Au core-Ag shell nanoparticles. The triangular gold core is obtained by the reduction of gold ions by lemongrass extract. Utilizing the negative charge on the gold nanotriangles, silver ions are bound to their surface and thereafter reduced by ascorbic acid under alkaline conditions. The thickness of the silver shell may be modulated by varying the pH of the reaction medium. The formation of the Au core-Ag shell triangular nanostructures has been followed by UV-vis-NIR Spectroscopy, X-ray photoelectron spectroscopy, transmission electron microscopy (TEM) and atomic force microscopy (AFM) measurements. The sharp vertices of the triangles coupled with the core-shell structure is expected to have potential for application in surface enhanced Raman spectroscopy and in the sensitive detection of biomolecules

  5. Gd doped Au nanoclusters: Molecular magnets with novel properties

    KAUST Repository

    Mokkath, Junais Habeeb

    2014-01-01

    The structural, magnetic, and optical properties of subnanometer Au N and AuN-1Gd1 gas phase clusters (N = 2 to 8) are systematically investigated in the framework of (time-dependent) density functional theory, using the B3LYP hybrid exchange correlation functional. The size dependent evolution of the gap between the highest occupied and lowest unoccupied molecular orbitals, the magnetism, and the absorption spectra are studied. The simultaneous appearance of large magnetic moments, significant band gaps, and plasmon resonances in the visible spectral region leads to novel multi-functional nanomaterials for applications in drug delivery, magnetic resonance imaging, and photo-responsive agents. © 2013 Elsevier B.V. All rights reserved.

  6. First-principles study of SF_6 decomposed gas adsorbed on Au-decorated graphene

    International Nuclear Information System (INIS)

    Zhang, Xiaoxing; Yu, Lei; Gui, Yingang; Hu, Weihua

    2016-01-01

    Graphical abstract: - Highlights: • We theoretically investigated the decomposed gaseous components of sulfur hexafluoride (SF_6), namely, H_2S, SO_2, SOF_2, and SO_2F_2, adsorbed on pristine and Au-embedded graphene based on DFT-D, in which the van der Waals effect is considered. • H_2S, SO_2, SOF_2, and SO_2F_2 are chemisorption on Au-doped graphene, appreciably stronger than physisorption on pristine graphene in which the van der Waals dominates. • Only H_2S exhibits n-type doping to Au-graphene, whereas the rest gases exhibit p-type doping. The n-type and p-type sensing behaviors that Au-doped graphene displays to different gases play a crucial role in selective sensing application. • Magnetic moments fluctuate substantially in the original Au-graphene when H_2S and SO_2 are adsorbed. While the adsorption effects of SOF_2 and SO_2F_2 generate magnetism quenching. The different changes of magnetic moments in every adsorption system provide another approach to selective detection. • The charge transfer mechanism is deeply discussed in this paper. - Abstract: We theoretically investigated the decomposed gaseous components of sulfur hexafluoride (SF_6), namely, H_2S, SO_2, SOF_2, and SO_2F_2, adsorbed on pristine and Au-embedded graphene based on the revised Perdew–Burke–Ernzerhof calculation, which empirically includes a dispersion correction (DFT-D) for van der Waals interaction with standard generalized gradient approximation. Pristine graphene exhibits weak adsorption and absence of charge transfer, which indicates barely satisfactory sensing for decomposed components. The Au atom introduces magnetism to the pristine graphene after metal-embedded decoration as well as enhances conductivity. All four molecules induce certain hybridization between the molecules and Au-graphene, which results in chemical interactions. SOF_2 and SO_2F_2 exhibit a strong chemisorption interaction with Au-graphene, while H_2S and SO_2 exhibit quasi-molecular binding

  7. Facile preparation of surfactant-free Au NPs/RGO/Ni foam for degradation of 4-nitrophenol and detection of hydrogen peroxide

    Science.gov (United States)

    Liu, Y. Y.; Guo, X. L.; Zhao, L.; Zhu, L.; Chen, Z. T.; Chen, J.; Zhang, Y.; Sun, L. T.; Zhao, Y. H.

    2018-06-01

    The application of Au nanoparticles (Au NPs) often requires surface modification with chemical surfactants, which dramatically reduce the surface activity and increase the chemical contamination and cost of Au NPs. In this research, we have developed a novel Au NPs/reduced graphene oxide/Ni foam hybrid (Au NPs/RGO/NiF) by in situ reduction through ascorbic acid and replacement reaction. This method is green, facile and efficient. The Au NPs are free of chemical surfactants and are homogeneously distributed on the surface of the RGO/NiF. The as-prepared Au NPs/RGO/NiF hybrid is uniform, stable and exhibits not only a high reduction efficiency for the reduction of 4-nitrophenol with a catalytic kinetic constant of up to 0.46 min‑1 (0.15 cm3 catalysis) but also a sensitive and selective detection of H2O2 with a detection limit of ∼1.60 μM.

  8. Influence of the heat flux and of the gas on heat transfer and friction coefficients in a smooth cylindrical tube; Influence du flux de chaleur et de la nature du gaz sur les coefficients d'echange et le frottement dans un tube cylindrique lisse

    Energy Technology Data Exchange (ETDEWEB)

    Delpont, J P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1962-12-15

    paroi peut atteindre 430 deg C, le flux de chaleur atteignant 16 watts/cm{sup 2}. Les nombres de Reynolds Re{sub m}, de Margoulis M{sub m} et le coefficient de frottement f sont calcules en evaluant les proprietes physiques du gaz a la temperature moyenne T{sub m}. Pour un nombre de Reynolds Re{sub m} donne, on observe une diminution de M{sub m} et de f lorsque le flux de chaleur augmente: elle peut atteindre 10 pour cent dans les essais presentes. Une formulation est proposee qui permet de traduire cet effet au moyen d'un parametre de flux (T{sub m} - T{sub m}) / T{sub p} utilise comme terme correctif (T{sub p} = temperature de la paroi). Les formules de correlation proposees sont: M{sub m} = 0,0168 Re{sub m}{sup -0,18} P{sub m}{sup -0,6} (1 - 0,4 [(T{sub p} - T{sub m}) / T{sub p}]) pour l'air f = f{sub 0} (1 - 0,25 [(T{sub p} - T{sub m}) / T{sub p}]) pour l'air M{sub m} 0,0171 Re{sub m}{sup -0,18} P{sub m}{sup -0,6} (1 - 0,2 [(T{sub p} - T{sub m}) / T{sub p}]) pour le CO{sub 2} f = f{sub 0} (1 - 0,20 [(T{sub p} - T{sub m}) / T{sub p}]) pour le gaz carbonique avec f{sub 0} coefficient de frottement en ecoulement isotherme. (auteur)

  9. Origin of the p-type character of AuCl3 functionalized carbon nanotubes

    KAUST Repository

    Murat, Altynbek

    2014-02-13

    The microscopic origin of the p-type character of AuCl3 functionalized carbon nanotubes (CNTs) is investigated using first-principles self-interaction corrected density functional theory (DFT). Recent DFT calculations suggest that the p-type character of AuCl3 functionalized CNTs is due to the Cl atoms adsorbed on the CNTs. We test this hypothesis and show that adsorbed Cl atoms only lead to a p-type character for very specific concentrations and arrangements of the Cl atoms, which furthermore are not the lowest energy configurations. We therefore investigate alternative mechanisms and conclude that the p-type character is due to the adsorption of AuCl4 molecules. The unraveling of the exact nature of the p-doping adsorbates is a key step for further development of AuCl3 functionalized CNTs in water sensor applications. © 2014 American Chemical Society.

  10. Manipulating the optical properties of dual implanted Au and Zn nanoparticles in sapphire

    Science.gov (United States)

    Epie, E. N.; Scott, D.; Chu, W. K.

    2017-11-01

    We have synthesized and manipulated the optical properties of metallic nanoparticles (NPs) by using a combination of low-energy high-fluence dual implantation and thermal annealing. We demonstrated that by implanting Zn before Au, the resulting absorption peak is enormously blue-shifted by 120 nm with respect to that of Au-only implanted samples. This magnitude of optical shift is not characteristic of unalloyed Au and to the best of our knowledge cannot be attributed to NP size change alone. On the other hand, the absorption peak for samples implanted with Au followed by Zn is blue-shifted about 20 nm. Additionally, by carefully annealing all implanted samples, both NP size distribution and corresponding optical properties can be further modified in a controlled manner. We attribute these behaviours to nanoalloy formation. This work provides a direct method for synthesizing and manipulating both the plasmonic and structural properties of metallic alloy NP in various transparent dielectrics for diverse applications.

  11. Transport diphasique de gaz et de condensat. Aspects techniques et économiques Technical and Economic Aspects of Two-Phase Pipelining of Gas and Condensate

    Directory of Open Access Journals (Sweden)

    Bourgeois T.

    2006-11-01

    Full Text Available L'évacuation diphasique de la production d'un gisement de gaz à condensat présente des avantages importants, en particulier sur le plan économique. Les caractéristiques des écoulements diphasiques sont exposées, avec les conséquences principales sur la définition d'un schéma d'exploitation. Une comparaison économique est ensuite présentée, pour illustrer la réduction des investissements qui peut être apportée par l'évacuation diphasique de la production. Enfin, les recherches françaises sur les écoulements diphasiques dans les conduites pétrolières sont brièvement décrites, ainsi qu'un exemple de calcul sur une conduite de gaz à condensat en exploitation diphasique. The two-phase pipelining of a wet gas field production presents many advantages, especially from an economic point of view. The characteristics of two-phase flow are described, together with their main consequences on the operational scheme. Then an economic comparison is made to illustrate the reduction in investment costs that can by achieved with two-phase pipelining. Research in France on two-phase flow in gas and condensate pipelines is briefly described, and an example is given of the designing of a wet-gas pipeline currently being operated in the two-phase mode.

  12. Controlled Synthesis of Au@AgAu Yolk-Shell Cuboctahedra with Well-Defined Facets.

    Science.gov (United States)

    Londono-Calderon, Alejandra; Bahena, Daniel; Yacaman, Miguel J

    2016-08-02

    The synthesis of Au@AgAu yolk-shell cuboctahedra nanoparticles formed by galvanic replacement in a seed-mediated method is described. Initially, single-crystal Au seeds are used for the formation of Au@Ag core-shell nanocubes, which serve as the template material for the deposition of an external Au layer. The well-controlled synthesis yields the formation of cuboctahedra nanoparticles with smooth inner and outer Au/Ag surfaces. The deposition/oxidation process is described to understand the formation of cuboctahedra and octahedra nanoparticles. The Au core maintains the initial morphology of the seed and remains static at the center of the yolk-shell because of residual Ag. Structural analysis of the shell indicates intrinsic stacking faults (SFs) near the surface. Energy dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS) compositional analysis show an Au-Ag nonordered alloy forming the shell. The three-dimensional structure of the nanoparticles presented open facets on the [111] as observed by electron tomography SIRT reconstruction over a stack of high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) images. The geometrical model was validated by analyzing the direction of streaks in coherent nanobeam diffraction (NBD). The catalytic activity was evaluated using a model reaction based on the reduction of 4-nitrophenol (4-NTP) by NaBH4 in the presence of Au@AgAu yolk-shell nanoparticles.

  13. Gasification in Petroleum Refinery of 21st Century La gazéification dans la raffinerie du pétrole du XXIe siècle

    Directory of Open Access Journals (Sweden)

    Furimsky E.

    2006-12-01

    goudrons, le coke et l'asphalte, résultant respectivement de la viscoréduction, de la carbonisation et du désasphaltage. Les résidus finaux peuvent être, à leur tour, convertis en produits utilisables comme l'hydrogène, la vapeur, l'électricité, l'ammoniac et des produits chimiques. Dans ce contexte, la gazéification est apparue comme la technologie de choix pour la valorisation des résidus en raison de ses meilleures performances. De même, les boues de raffinerie peuvent être cogazéifiées avec les résidus finaux et devenir alors des produits valorisables. Intégrée à la raffinerie de pétrole, la gazéification peut aider à résoudre les problèmes environnementaux liés à l'élimination des résidus et des boues. Les résultats économiques de la raffinerie peuvent également être améliorés. Les tendances de déréglementation du marché de l'énergie permettent aux raffineries de pétrole d'y pénétrer, soit toutes seules, soit en partenariat avec les fournisseurs d'utilités. Le potentiel de coproduction de produits chimiques et de vapeur avec l'électricité offre une souplesse de réaction permettant de répondre aux demandes du marché. L'intérêt de la technologie de la gazéification est commercialement démontré. Parmi d'autres, les gazéificateurs à lit entraîné sont les gazéificateurs de prédilection. Plusieurs projets commerciaux en Europe, en Asie et aux États-Unis font appel à un gazéificateur utilisant soit un système d'alimentation en suspension, soit un système d'alimentation par voie sèche.

  14. Thermodynamic Aspects of Supercritical Fluids Processing: Applications of Polymers and Wastes Treatment Aspects thermodynamiques des procédés mettant en oeuvre des fluides supercritiques : applications aux traitements des polymères et des déchets

    Directory of Open Access Journals (Sweden)

    Beslin P.

    2006-11-01

    Full Text Available Supercritical fluid processes are of increasing interest for many fields : in supercritical fluid separation (petroleum-chemistry separation and purification, food industry and supercritical fluid chromatography (analytical and preparative separation, determination of physicochemical properties; as reaction media with continuously adjustable properties from gas to liquid (low-density polyethylene, waste destruction, polymer recycling; in geology and mineralogy (volcanoes, geothermal energy, hydrothermal synthesis; in particle, fibber and substrate formations (pharmaceuticals, explosives, coatings; in drying materials (gels. This paper presents the unusual physicochemical properties of supercritical fluids in relation to their engineering applications. After a short report of fundamental concepts of critical behavior in pure fluids, we develop in more details the tunable physicochemical properties of fluid in the supercritical domain. The second part of this paper describes the engineering applications of supercritical fluids relevant of chemical reactions and polymer processing. Each application presentation is divided in two parts : the first one recalls the basic concepts including general background, physicochemical properties and the second one develops the engineering applications relevant of the advocated domain. La mise en Suvre des fluides supercritiques est d'un intérêt croissant dans de nombreux domaines : pour la séparation (séparation et purification en pétrochimie, industrie alimentaire et la chromatographie par fluides supercritiques (séparation analytique et préparatoire, détermination des propriétés physicochimiques, comme milieux réactifs aux propriétés continûment ajustables allant du gaz au liquide (polyéthylène de faible densité, élimination des déchets, recyclage des polymères, en géologie et en minéralogie (volcanologie, énergie géothermique, synthèse hydrothermique, dans la formation des particules

  15. AU-EU “Strategic Partnership”

    DEFF Research Database (Denmark)

    Rodt, Annemarie Peen; Okeke, Jide

    2013-01-01

    This article appraises strategic partnership between the African Union (AU) and European Union (EU). It examines the context and nature of AU and EU security relations and explores the conditions under which partnership has a positive impact in this regard. This includes an evaluation...... of convergence between the two organizations and its effect or lack thereof on African security. The article concludes that events leading up to and initiatives following the 2007 Joint Africa–European Union Strategy have produced a degree of AU and EU convergence, which has had limited impact on the efficacy...... of the African security regime, the level of which remains mediocre at best....

  16. Gaz Phase IR and UV Spectroscopy of Neutral Contact Ion Pairs

    Science.gov (United States)

    Habka, Sana; Brenner, Valerie; Mons, Michel; Gloaguen, Eric

    2016-06-01

    Cations and anions, in solution, tend to pair up forming ion pairs. They play a crucial role in many fundamental processes in ion-concentrated solutions and living organisms. Despite their importance and vast applications in physics, chemistry and biochemistry, they remain difficult to characterize namely because of the coexistence of several types of pairing in solution. However, an interesting alternative consists in applying highly selective gas phase spectroscopy which can offer new insights on these neutral ion pairs. Our study consists in characterizing contact ion pairs (CIPs) in isolated model systems (M+, Ph-(CH2)n-COO- with M=Li, Na, K, Rb, Cs, and n=1-3), to determine their spectral signatures and compare them to ion pairs in solution. We have used laser desorption to vaporize a solid tablet containing the desired salt. Structural information for each system was obtained by mass-selective, UV and IR laser spectroscopy combined with high level quantum chemistry calculations1. Evidence of the presence of neutral CIPs was found by scanning the π-π* transition of the phenyl ring using resonant two-photon ionization (R2PI). Then, conformational selective IR/UV double resonance spectra were recorded in the CO2- stretch region for each conformation detected. The good agreement between theoretical data obtained at the BSSE-corrected-fullCCSD(T)/dhf-TZVPP//B97-D3/dhf-TZVPP level and experimental IR spectra led us to assign the 3D structure for each ion pair formed. Spectral signatures of (M+, Ph-CH2-COO-) pairs, were assigned to a bidentate CIPs between the alkali cation and the carboxylate group. In the case of (Li+, Ph-(CH2)3-COO-) pairs, the presence of a flexible side chain promotes a cation-π interaction leading to a tridentate O-O-π structure with its unique IR and UV signatures. IR spectra obtained on isolated CIPs were found very much alike the ones published on lithium and sodium acetate in solution2. However, in the case of sodium acetate, solution

  17. Synthesis of ultrathin face-centered-cubic Au@Pt and Au@Pd core-shell nanoplates from hexagonal-close-packed Au square sheets

    KAUST Repository

    Fan, Zhanxi

    2015-03-17

    The synthesis of ultrathin face-centered-cubic (fcc) Au@Pt rhombic nanoplates is reported through the epitaxial growth of Pt on hexagonal-close-packed (hcp) Au square sheets (AuSSs). The Pt-layer growth results in a hcp-to-fcc phase transformation of the AuSSs under ambient conditions. Interestingly, the obtained fcc Au@Pt rhombic nanoplates demonstrate a unique (101)f orientation with the same atomic arrangement extending from the Au core to the Pt shell. Importantly, this method can be extended to the epitaxial growth of Pd on hcp AuSSs, resulting in the unprecedented formation of fcc Au@Pd rhombic nanoplates with (101)f orientation. Additionally, a small amount of fcc (100)f-oriented Au@Pt and Au@Pd square nanoplates are obtained with the Au@Pt and Au@Pd rhombic nanoplates, respectively. We believe that these findings will shed new light on the synthesis of novel noble bimetallic nanostructures. Phase change: Ultrathin Au@Pt and Au@Pd core-shell nanoplates were prepared from Au square sheets. A phase transformation from hexagonal close-packed (hcp) to face-centered cubic (fcc) is observed upon coating the hcp Au square sheets with Pt or Pd under ambient conditions. The prepared fcc Au@Pt and Au@Pd rhombic nanoplates demonstrate unique (101)f orientation (picture shows a typical fcc Au@Pt rhombic nanoplate). © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Some results on the fluorescence of gases excited by high-energy charged particles; Quelques resultats concernant la fluorescence de gaz excites par des particules chargees de grande energie

    Energy Technology Data Exchange (ETDEWEB)

    Koch, L; Lesureur, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    The essential characteristics of rare gases for use as scintillators are as follows: a very brief period of luminescence, generally less than 10{sup -8} s; a linear response as a function of the energy lost by the nuclear particle in the gas, even in the case of strongly ionising particles (fission fragments). In the gaseous or condensed state therefore, they are of great interest in nuclear physics. (author