WorldWideScience

Sample records for gamow-teller strength distribution

  1. Gamow-Teller Strength Distributions for Some Magic Nuclei

    Necla ÇAKMAK

    2014-12-01

    Full Text Available The total Gamow-Teller strengths and their energy distributions for 96Zr, 96Sr, 54Ca, 28O, 24C and 14C have been obtained within the framework of Random Phase Approximation (RPA. The effective interaction potential has been described by considering the commutativity of the Gamow-Teller operator with the central part of the nuclear Hamiltonian.

  2. Gamow-Teller strength distributions and electron capture rates for 55Co and 56Ni

    Nabi, Jameel-Un; Rahman, Muneeb-Ur

    2005-01-01

    The Gamow-Teller strength (GT) distributions and electron capture rates on 55 Co and 56 Ni have been calculated using the proton-neutron quasiparticle random phase approximation theory. We calculate these weak interaction mediated rates over a wide temperature (0.01x10 9 -30x10 9 K) and density (10-10 11 gcm -3 ) domain. Electron capture process is one of the essential ingredients involved in the complex dynamics of supernova explosion. Our calculations of electron capture rates show differences with the reported shell model diagonalization approach calculations and are comparatively enhanced at presupernova temperatures. We note that the GT strength is fragmented over many final states

  3. Gamow-Teller strength distribution in the beta-decay of 100Ag from total-absorption gamma spectrometry

    Batist, L.; Bykov, A.; Moroz, F.; Wittmann, V.; Alkhazov, G.D.; Keller, H.; Kirchner, R.; Klepper, O.; Roeckl, E.; Huyse, M.; Duppen, P. van; Reusen, G.; Plochocki, A.; Pfuetzner, M.; Rykaczewski, K.; Szerypo, J.; Zylicz, J.; Brown, B.A.

    1994-10-01

    The EC/β + -decay of the odd-odd nucleus 100 Ag was studied by means of total absorption γ-ray spectrometry. Most of the Gamow-Teller strength was found to be concentrated at an excitation energy of 5.6 MeV in 100 Pd, the FWHM of this resonance being 1.5 MeV. The measured strength distribution which is interpreted within the BCS approximation as being due to the dominant population of four-quasiparticle excitations, resembles the distribution predicted by an advanced shell-model calculation for the 98 Ag→ 98 Cd decay. (orig.)

  4. Gamow teller strength from n-nucleus scattering

    Haeusser, O.

    1989-08-01

    Detailed studies of the spin-isospin structure of nuclear excitations are possible at TRIUMF's medium resolution spectrometer using the (n,p), ( p → , p →/ and (p,n) reactions. We discuss here results on isospin symmetry of inelastic nucleon scattering reactions populating isospin triads in A=6 and A=12 nuclei. The empirical ratio of L=0 isovector spin flip cross sections at 200-450 MeV and B(GT) for strong Gamow-Teller transitions in p-shell nuclei is found to be larger than calculated in the DWIA using a free NN t-matrix. Based on empirical values of σ/B(GT) the β + Gamow Teller strength function from (n,p) reactions on (sd) and (fp) shell targets is substantially quenched compared to current nuclear structure models using the free-nucleon axial-vector coupling constant. (Author) 33 refs., 6 figs

  5. Gamow Teller strength from charge exchange reactions at intermediate energies

    Haeusser, O.

    1989-07-01

    Detailed studies of the spin-isospin structure of nuclear excitations are possible at TRIUMF's medium resolution spectrometer using the (n,p), ( p → , p →/ ) and (p,n) reactions. We discuss here results on isospin symmetry of inelastic nucleon scattering reactions populating isospin triads in A=6 and A=12 nuclei. The β + Gamow Teller strength function from (n,p) reactions on (sd) and (fp) shell targets is found to be substantially quenched compared to current nuclear structure models using the free-nucleon axial-vector coupling constant. (Author) 22 refs., 3 figs

  6. Role of the momentum transfer in the quenching of the Gamow-Teller strength

    Marketin, Tomislav [Institut fuer Kernphysik, Technische Universitaet Darmstadt (Germany); Physics Department, Faculty of Science, University of Zagreb (Croatia); Martinez-Pinedo, Gabriel [Institut fuer Kernphysik, Technische Universitaet Darmstadt (Germany); Paar, Nils; Vretenar, Dario [Physics Department, Faculty of Science, University of Zagreb (Croatia)

    2012-07-01

    A fully consistent calculation of the Gamow-Teller strength is presented, based on a microscopic theoretical framework. Nuclear ground state is determined using the relativistic Hartree-Bogolyubov (RHB) model with density dependent meson-nucleon coupling constants, and transition rates are calculated via proton-neutron relativistic quasiparticle RPA using the same interaction as in the RHB equations. The (p,n) probe has a similar spin-isospin operator structure to the Gamow-Teller (GT) operator. However, they become comparable only if the GT cross section is measured at a very small momentum transfer q. At higher momentum transfer the isovector spin monopole (IVSM) mode occurs, with the r{sup 2}{sigma}{tau} transition operator. Unlike the Gamow-Teller operator which excites only the 0{Dirac_h}{omega} transitions, the isovector spin monopole operator can also excite 2{Dirac_h}{omega} transitions and can change the strength distribution at high excitation energies. We explore the strength beyond the resonance, examine the effect of momentum transfer on the total strength and compare the results with recent measurements.

  7. Gamow-Teller strength distributions in 76Ge, 76,82Se, and 90,92Zr by the deformed proton-neutron QRPA

    Ha, Eunja; Cheoun, Myung-Ki

    2015-02-01

    The deformed proton-neutron quasiparticle random phase approximation (QRPA) has been developed and applied to evaluate Gamow-Teller (GT) transition strength distributions, including high-lying excited states. The data of high-lying excited states are recently available beyond one or two nucleon threshold by charge exchange reactions using hundreds of MeV projectiles. Our calculations started with single-particle states calculated using a deformed, axially symmetric Woods-Saxon potential. The neutron-neutron and proton-proton pairing correlations are explicitly taken into account at the deformed Bardeen-Cooper-Schriffer theory. Additionally, the ground state correlations and two-particle and two-hole mixing states were included in the deformed QRPA. In this work, we used a realistic two-body interaction, given by the Brueckner G-matrix based on the CD Bonn potential to reduce the ambiguity on the nucleon-nucleon interactions inside nuclei. We applied our formalism to the GT transition strengths for 76Ge, 76,82Se, and 90,92Zr, and compared the results with the available experimental data. The GT strength distributions were sensitive to the deformation parameter as well as its sign, i.e., oblate or prolate. The Ikeda sum rule, which is usually thought to be satisfied under the one-body current approximation, regardless of nucleon models, was used to test our numerical calculations and shown to be satisfied without introducing the quenching factor, if high-lying GT excited states were properly taken into account. Most of the GT strength distributions of the nuclei considered in this work have the high-lying GT excited states beyond one-nucleon threshold, which are shown to be consistent with the available experimental data.

  8. Chiral filter, axial charges and Gamow-Teller strengths

    Rho, M.

    1983-09-01

    The different ways that nuclear matter responds to the weak axial-vector current are interpreted in terms of modification of the ''vacuum'' in baryon-rich environments. The notion of ''chiral filter'' is introduced. Use of a ward identity is suggested. The Gamow-Teller quenching and the enhanced axial charge in O + O - transitions follow from this. I also discuss briefly possible relevance of the nucleon as a topological soliton configuration to the global property of nuclear axial response functions

  9. Gamow-Teller strength in the β-decay of 36Ca

    Trinder, W.; Adelberger, E.G.; Janas, Z.; Keller, H.; Krumbholz, K.; Pfuetzner, M.; Rykaczewski, K.

    1994-11-01

    The β-decay of 36 Ca has been studied at the projectile fragment separator at GSI Darmstadt. The Gamow-Teller strength function B(GT), deduced from the observed β-delayed proton- and γ-emission and from the measured half-life of 102(2) ms, is compared to results obtained from large-scale sd-shell model calculations. (orig.)

  10. High-resolution study of the Gamow-Teller strength distribution in the light nuclei 9B and 13N using the (3He,t) charge-exchange reaction at 420 MeV beam energy

    Scholl, Clemens

    2010-01-01

    Excited states in the light nuclei 9 B and 13 C were studied using the ( 3 He,t) charge-exchange reaction on 9 Be and 13 C targets. The measurements were performed at the research center for nuclear physics (RCNP) in Osaka, Japan, using the magnetic spectrometer Grand Raiden and the dispersive WS course. The 3 He beam with an energy of 420 MeV was accelerated by the RCNP Ring Cyclotron. The Grand Raiden spectrometer and the WS course allow to study the ( 3 He,t) charge-exchange reaction with an energy resolution of around 30 keV, which is one order of magnitude better than measurements with the (p,n) charge-exchange reaction. The high resolution allows to better separate individual states and to determine weak excitation strengths because of low background in the spectra. A total of 19 states in 13 N were studied, and a total of 20 states were observed in 9 B. Of these, 9 states in 13 C and 10 states in 9 B were identified as being excited by a Gamow-Teller transition. Charge-exchange reactions are related to beta-decay, and at zero momentum transfer a simple proportionality exists between the cross-section of the charge-exchange experiment and the Fermi (F) or Gamow-Teller (GT) beta-decay strength. While the Fermi strength B(F) is concentrated in the transition to the isobaric analog state, the Gamow-Teller strength B(GT) is scattered among the excited states. The main aim of the present study is to determine the B(GT) strengths in the nuclei 9 B and 13 N. The only charge-exchange study of 9 B was made 30 years ago with the (p,n) reaction and a resolution of around 300-400 keV. Many states, especially at high excitation energy, could not be resolved by that study. The present work was able to separate many weakly excited states with small decay width at high excitation energies (12-19 MeV) in 9 B and determine the B(GT) strength distribution by using recent high-precision beta-decay data. The results point to a strong difference in spatial structure between the

  11. High-resolution study of the Gamow-Teller strength distribution in the light nuclei {sup 9}B and {sup 13}N using the ({sup 3}He,t) charge-exchange reaction at 420 MeV beam energy

    Scholl, Clemens

    2010-07-07

    Excited states in the light nuclei {sup 9}B and {sup 13}C were studied using the ({sup 3}He,t) charge-exchange reaction on {sup 9}Be and {sup 13}C targets. The measurements were performed at the research center for nuclear physics (RCNP) in Osaka, Japan, using the magnetic spectrometer Grand Raiden and the dispersive WS course. The {sup 3}He beam with an energy of 420 MeV was accelerated by the RCNP Ring Cyclotron. The Grand Raiden spectrometer and the WS course allow to study the ({sup 3}He,t) charge-exchange reaction with an energy resolution of around 30 keV, which is one order of magnitude better than measurements with the (p,n) charge-exchange reaction. The high resolution allows to better separate individual states and to determine weak excitation strengths because of low background in the spectra. A total of 19 states in {sup 13}N were studied, and a total of 20 states were observed in {sup 9}B. Of these, 9 states in {sup 13}C and 10 states in {sup 9}B were identified as being excited by a Gamow-Teller transition. Charge-exchange reactions are related to beta-decay, and at zero momentum transfer a simple proportionality exists between the cross-section of the charge-exchange experiment and the Fermi (F) or Gamow-Teller (GT) beta-decay strength. While the Fermi strength B(F) is concentrated in the transition to the isobaric analog state, the Gamow-Teller strength B(GT) is scattered among the excited states. The main aim of the present study is to determine the B(GT) strengths in the nuclei {sup 9}B and {sup 13}N. The only charge-exchange study of {sup 9}B was made 30 years ago with the (p,n) reaction and a resolution of around 300-400 keV. Many states, especially at high excitation energy, could not be resolved by that study. The present work was able to separate many weakly excited states with small decay width at high excitation energies (12-19 MeV) in {sup 9}B and determine the B(GT) strength distribution by using recent high-precision beta-decay data. The

  12. Gamow-Teller strength in deformed nuclei within self-consistent pnQRPA with the Gogny force

    Martini M.

    2014-03-01

    Full Text Available In recent years fully consistent quasiparticle random-phase approximation (QRPA calculations using finite range Gogny force have been performed to study electromagnetic excitations of several axially-symmetric deformed nuclei up to the 238U. Here we present the extension of this approach to the charge-exchange nuclear excitations (pn-QRPA. In particular we focus on the Gamow-Teller (GT excitations. A comparison of the predicted GT strength distribution with existing experimental data is presented The role of nuclear deformation is shown. Special attention is paid to β-decay half-lives calculations for which experimental data exist.

  13. Nuclear structure properties and stellar weak rates for 76Se: Unblocking of the Gamow Teller strength

    Nabi, Jameel-Un; Ishfaq, Mavra; Böyükata, Mahmut; Riaz, Muhammad

    2017-10-01

    At finite temperatures (≥ 107K), 76Se is abundant in the core of massive stars and electron capture on 76Se has a consequential role to play in the dynamics of core-collapse. The present work may be classified into two main categories. In the first phase we study the nuclear structure properties of 76Se using the interacting boson model-1 (IBM-1). The IBM-1 investigations include the energy levels, B (E 2) values and the prediction of the geometry. We performed the extended consistent-Q formalism (ECQF) calculation and later the triaxial formalism calculation (constructed by adding the cubic term to the ECQF). The geometry of 76Se can be envisioned within the formalism of the potential energy surface based on the classical limit of IBM-1 model. In the second phase, we reconfirm the unblocking of the Gamow-Teller (GT) strength in 76Se (a test case for nuclei having N > 40 and Z fashion. Results are compared with experimental data and previous calculations. The calculated GT distribution fulfills the Ikeda sum rule. Rates for β-delayed neutrons and emission probabilities are also calculated. Our study suggests that at high stellar temperatures and low densities, the β+-decay on 76Se should not be neglected and needs to be taken into consideration along with electron capture rates for simulation of presupernova evolution of massive stars.

  14. Gamow-Teller strength functions and neutrino problems

    Haxton, W.C.

    1982-01-01

    A quantitative understanding of spin strengths in nuclei is of vital importance in studies of nuclear double beta decay and in solar neutrino spectroscopy. The current status of these problems is outlined

  15. A study of Gamow-Teller strength in A=37 nuclei

    Aufderheide, M.B.; Bloom, S.D.; Resler, D.A.; Goodman, C.D.

    1992-01-01

    An analysis is made of the recent β+ decay measurements of Garcia et al., in order to see whether the 1981 37 Cl(p,n) 37 Ar measurements of Rapaport et al. are consistent with them. Garcia et al., were not able to determine the amount of Gamow-Teller strength in the isobaric analog state (IAS) or the Coulomb mixing of Fermi strength to a state near the IAS, and were forced to determine the amount of Gamow-Teller strength in the daughter 1371 keV state by making the branching ratios sum to unity. These uncertainties leave a range of possible values open which we investigate. We find that the experiments are consistent within part of this range. We also examine the effect of this range of allowed values on solar and supernova neutrino cross sections of 37 Cl and find weak dependence on the uncertainties described here. We discuss how this range can be narrowed so that the consistency of the two experiments can be conclusively tested

  16. Breaking of the SU(4) limit for the Gamow-Teller strength in N{proportional_to}Z nuclei

    Petermann, I. [Technische Universitaet Darmstadt, Institut fuer Kernphysik, Darmstadt (Germany); Gesellschaft fuer Schwerionenforschung Darmstadt, Darmstadt (Germany); Martinez-Pinedo, G. [Gesellschaft fuer Schwerionenforschung Darmstadt, Darmstadt (Germany); Langanke, K. [Gesellschaft fuer Schwerionenforschung Darmstadt, Darmstadt (Germany); Technische Universitaet Darmstadt, Institut fuer Kernphysik, Darmstadt (Germany); Caurier, E. [Universite Louis Pasteur, Institut de Recherches Subatomiques, Strasbourg (France)

    2007-12-15

    We have performed large-scale shell model calculations of the Gamow-Teller strength distributions in N{proportional_to}Z pf-shell nuclei. These calculations were motivated by the experimental attempts to measure the low-lying GT strength for the even-even N=Z+2 or N=Z-2 nuclei {sup 46}Ti, {sup 50}Cr, {sup 54}Fe and {sup 62}Ge, where a sizable low-energy GT strength could be interpreted as reminiscence of SU(4) symmetry; in the limit of exact SU(4) symmetry the GT{sub -} strength would be concentrated in a single transition to the lowest T=0, J=1{sup +} state in the daughter. We confirm that the SU(4) symmetry is strongly broken by the spin-orbit interaction and by increasing neutron excess. (orig.)

  17. Role of momentum transfer in the quenching of the Gamow-Teller strength

    Marketin, T.; Martínez-Pinedo, G.; Paar, N.; Vretenar, D.

    2012-01-01

    A recent analysis of (p,n) and (n,p) reaction data from 90 Zr was performed recently, where a significant amount of Gamow-Teller strength was found above the resonance, an energy region previously unreachable by experimental setups. The extracted strengths in the β − and the β + channel indicate that approximately 10% of the total strength necessary to satisfy the model independent Ikeda sum rule is missing. One possible source of this discrepancy is the treatment of the isovector spin monopole (IVSM) mode of excitation which has been found to occurr at high excitation energies. Employing the relativistic Hartree-Bogoliubov (RHB) model and the protonneutron relativistic quasiparticle random phase approximation (pn-RQRPA) to calculate the nuclear response, we explore the contribution of the IVSM mode to the total L= 0 strength and apply our results to the available data.

  18. Role of momentum transfer in the quenching of the Gamow-Teller strength

    Marketin, T.; Martinez-Pinedo, G.; Paar, N.; Vretenar, D. [Institut fuer Kernphysik, Technische Universitaet Darmstadt, D-64289 Darmstadt, Germany and Physics Department, Faculty of Science, University of Zagreb, 10000 Zagreb (Croatia); Institut fuer Kernphysik, Technische Universitaet Darmstadt, D-64289 Darmstadt (Germany); Physics Department, Faculty of Science, University of Zagreb, 10000 Zagreb (Croatia)

    2012-10-20

    A recent analysis of (p,n) and (n,p) reaction data from {sup 90}Zr was performed recently, where a significant amount of Gamow-Teller strength was found above the resonance, an energy region previously unreachable by experimental setups. The extracted strengths in the {beta}{sub -} and the {beta}{sub +} channel indicate that approximately 10% of the total strength necessary to satisfy the model independent Ikeda sum rule is missing. One possible source of this discrepancy is the treatment of the isovector spin monopole (IVSM) mode of excitation which has been found to occurr at high excitation energies. Employing the relativistic Hartree-Bogoliubov (RHB) model and the protonneutron relativistic quasiparticle random phase approximation (pn-RQRPA) to calculate the nuclear response, we explore the contribution of the IVSM mode to the total L= 0 strength and apply our results to the available data.

  19. Gamow-Teller strength function for 90Zr: Effects of spin and isospin exchange forces, and ground-state correlations

    Mathews, G.J.; Bloom, S.D.; Hausman, R.F. Jr.

    1983-01-01

    Shell-model calculations of the Gamow-Teller strength function for 90 Zr have been performed utilizing a realistic finite-range two-body interaction in a model space consisting of the 2p and 1g shells. The effects of admixtures of two-particle two-hole excitations in 90 Nb, mostly due to the spin and isospin exchange components of the nucleon-nucleon force, are discussed. Ground state correlations in 90 Zr are also added via seniority-zero two-proton excitations from the 2p shell into the 1g/sub 9/2/ shell. With the correlations the Gamow-Teller strength function is in good agreement with the experimental results and accounts for essentially all of the observed dispersion of strength. The inclusion of these correlations does not, however, produce either a displacement of Gamow-Teller strength to higher excitation energies, or a significant change in the total strength. Thus, they cannot account for the observed Gamow-Teller quenching. The quenching factor derived by a comparison of our calculated results with experiment is 0.52

  20. Gamow-Teller Strengths from (3He,t) Charge-Exchange Reaction

    Fujita, Yoshitaka

    2006-01-01

    Gamow-Teller (GT) transition is the most popular nuclear weak process with the nature of spin-isospin excitation. GT transitions in pf-shell nuclei, including those starting from unstable nuclei, are of interest, due to their importance in astrophysical processes. Weak processes, however, gives us rather limited information on the GT response of nuclei. We introduce high-resolution ( 3 He, t) reaction at 0 0 and at an intermediate beam energy as a new spectroscopic tool for studying GT excitations. Owing to the high energy-resolution of the reaction (∼ 30 keV), individual transitions can be observed up to the region of GT giant resonance. Assuming isospin symmetry for the T z = ±1 → 0 isobaric analogous transitions in isobars with mass number A, we present a new method to deduce GT transition strengths starting from proton rich exotic nuclei

  1. Gamow-Teller strength in the continuum studied via the (p,n) reaction

    Wakasa, T.; Hatanaka, K.; Sakai, H.

    2002-01-01

    The double differential cross sections for θ lab between 0.0deg and 14.7deg and the polarization transfer coefficient D NN (0deg) for the 27 Al (p vector, n vector) reaction have been measured at a bombarding energy of 295 MeV. A multipole decomposition technique is applied for the cross section data to extract L=0, 1, 2, and 3 contributions. The Gamow-Teller (GT) strength B(GT) deduced from the L=0 contribution is compared with the B(GT) values calculated in a full sd shell-model space. The sum of B(GT) values up to 20 MeV excitation is S β- =4.0 ± 0.1 ± 0.1. A fairly large L=0 contribution is observed in the continuum region up to 50 MeV, which could be in part ascribed to the quenched GT strength. A limit on the effect that the Δ(1232)-isobar nucleon-hole admixture has upon the GT strength is estimated. (author)

  2. Gamow-Teller strength functions from (→p,→p') scattering experiments

    Hausser, O.

    1987-01-01

    We present here recent (→p, →'p) results from TRIUMF that are relevant to the determination of spin-flip isovector strength functions in nuclei. Distortion factors needed for the extraction of nuclear-structure information have been deduced from cross sections and analyzing powers in elastic scattering for several energies and targets. Nonrelativistic optical potentials obtained by folding effective nucleon (N)-nucleus interactions with nuclear densities are found to overpredict both elastic and reaction cross sections, whereas Dirac calculations that include Pauli blocking are in good agreement with the data. Spin observables (S nn and A y ) for the quasi-elastic region in 54 Fe(→p, →p) at 290 MeV provide some evidence for the reduction of the effective proton mass predicted in relativistic mean-field theories as a consequence of the attractive scalar field in the nuclear medium. The energy dependence of the effective N-nucleus interaction at small momentum transfers has been investigated using isoscalar and isovector 1 + states in 28 Si as probe states. We find that the cross sections for the isovector transitions are in good agreement with predictions for the dominant Vστ part of the Franey-Love interaction. Gamow-Teller (GT) strength functions have been obtained in 24 Mg and 54 Fe from measurements of both cross sections and spin-flip probabilities S nn . The spin-flip cross sections σS nn are particularly useful in heavier nuclei to discriminate against a continuous background of ΔS = 0 excitations. In the (s, d) shell where full shell-model wave functions are available, the GT quenching factors (g A eff / g A free ) 2 ≅ 0.7 are in good agreement with those from recent (p, n) and (n, p) experiments. We show that a state-by-state comparison of (p, p') and (e, e') results has the potential of identifying pionic current contributions in (e, e'). The GT quenching factors in 54 Fe are smaller than in the (s, d) shell probably because of severely

  3. Gamow-Teller strength functions from N-nucleus scattering experiments at 200-400 MeV

    Haeusser, O.; British Columbia Univ., Vancouver; Vetterli, M.C.

    1988-01-01

    Recent measurements of (n,p), (p vector, p vector') and (p,n) reactions at TRIUMF have made possible a detailed examination of the spin-isospin structure of nuclear excitations up to 50 MeV. Cross sections for 54 Fe(n,p) 54 Mn and spin-flip cross sections for 54 Fe (p vector, p vector') near 300 MeV have been used to estimate the nuclear response for different multipoles L, spin transfers (ΔS = 0,1), and isospins of the residual nucleus (T f = 1,2). Qualitative features of the spin-flip probabilities in (p vector, p vector') are in good agreement with recent surface-RPA calculations. Between 200 and 400 MeV the ΔL=0 spin-flip isovector component is well described by the central part V στ of the Franey-Love interaction. The Gamow-Teller strength S + in 54 Fe, which is of significance in models of pre-collapse supernovae, is found to be smaller by a factor of two than the best available shell model calculations. In (sd)-shell nuclei ( 24,26 Mg, 28 Si) about (70±15)% of the Gamow-Teller strength predicted by untruncated shell-model calculations is found at low excitation. (orig.)

  4. Observation of Fermi and Gamow-Teller strength in the 800 MeV(p,n) reaction

    King, N S.P.; Lisowski, P W; Morgan, G L; Craig, P N; Jeppesen, R G; Lind, D A; Shepard, J R; Ullmann, J L; Zafiratos, C D; Goodman, C D

    1986-08-07

    Angular distributions have been measured for the (p,n) reaction on targets of /sup 6/Li, /sup 12/C, /sup 13/C, and /sup 15/N at 800 MeV with an energy resolution of 2.7 MeV allowing observation of discrete nuclear levels. As is the case at lower energies, this reaction is very selective, emphasizing Gamow-Teller (GT) and Fermi transitions. Absolute cross sections of pure GT transitions are reproduced by impulse approximation calculations. The ratio vertical strokeJsub(sigmatau)vertical stroke/sup 2//vertical strokeJsub(tau)vertical stroke/sup 2/ was extracted from /sup 13/C and /sup 15/N measurements at 800 MeV and from a /sup 13/C measurement at 318 MeV.

  5. Gamow-Teller strength and lepton captures rates on 66-71Ni in stellar matter

    Nabi, Jameel-Un; Majid, Muhammad

    Charge-changing transitions play a significant role in stellar weak-decay processes. The fate of the massive stars is decided by these weak-decay rates including lepton (positron and electron) captures rates, which play a consequential role in the dynamics of core collapse. As per previous simulation results, weak interaction rates on nickel (Ni) isotopes have significant influence on the stellar core vis-à-vis controlling the lepton content of stellar matter throughout the silicon shell burning phases of high mass stars up to the presupernova stages. In this paper, we perform a microscopic calculation of Gamow-Teller (GT) charge-changing transitions, in the β-decay and electron capture (EC) directions, for neutron-rich Ni isotopes (66-71Ni). We further compute the associated weak-decay rates for these selected Ni isotopes in stellar environment. The computations are accomplished by employing the deformed proton-neutron quasiparticle random phase approximation (pn-QRPA) model. A recent study showed that the deformed pn-QRPA theory is well suited for the estimation of GT transitions. The astral weak-decay rates are determined over densities in the range of 10-1011g/cm3 and temperatures in the range of 0.01 × 109-30 × 109K. The calculated lepton capture rates are compared with the previous calculation of Pruet and Fuller (PF). The overall comparison demonstrates that, at low stellar densities and high temperatures, our EC rates are bigger by as much as two orders of magnitude. Our results show that, at higher temperatures, the lepton capture rates are the dominant mode for the stellar weak rates and the corresponding lepton emission rates may be neglected.

  6. Gamow-teller transitions: progress and problems

    Walter, G.

    1994-01-01

    The determination of the Gamow-Teller (GT) matrix elements from beta-decay and charge exchange reactions has led to a series of discoveries concerning the structure of the nucleus and the properties of spin-isospin transitions in nuclei. The study of GT distribution and strength, either by charge exchange or weak decay, provides excellent tests for nuclear models as these parameters are extremely sensitive to the details of nuclear structure. Recent improvements of these models have reduced, for the most part, differences between experiment and theory, allowing in turn a more reliable estimate of weak decay rates in stellar matter. A better understanding of the 'missing strength' and of the failure of many experiments to detect the strength that is present have also been obtained. Recently, it appears also that weak decay studies in selected region (proton or neutron rich) of the N-Z plane give access to the GT giant resonance. (J.S.). 65 refs., 10 figs

  7. Measurement of Gamow-Teller and spin dipole strength in the 45Sc(n,p)45Ca reaction at 198 MeV

    Alford, W.P.; Celler, A.; Brown, B.A.; Long, S.; Raywood, K.

    1990-11-01

    The reaction 45 Sc(n,p) 45 Ca has been studied at an energy of 198 MeV with energy resolution of about 1 MeV. Measurements were carried out at nominal angles 0, 3, 6, 9, 12, 15, and 18 degrees and spectra obtained up to ∼40 MeV excitation energy in 45 Ca. Significant Gamow-Teller strength is observed at an excitation energy of about 7 MeV, somewhat higher than predicted by shell model calculations. The strength observed is in agreement with calculations using g A /g V ≅ 1. The spin dipole giant resonance is seen with centroid at about 15 MeV excitation and total cross section of 25 mb/sr at an angle of 6 degrees. (Author) (22 refs., 9 figs.)

  8. Gamow-Teller beta decay of proton-rich nuclei

    Klepper, O.; Rykaczewski, K.

    1990-11-01

    The beta decays of 48 Mn and of even-even nuclei near the double shell-closures at 100 Sn and 146 Gd are currently investigated at the GSI on-line mass separator. Their Gamow-Teller strength are surveyed in their present experimental status, together with related results from the ISOLDE (CERN) and ISOCELE (Orsay) separators, and are compared with predictions from different nuclear models. The strength of the 0 + → 1 + Gamow-Teller transitions is compiled in tables and graphs. (orig.)

  9. Ratio of Gamow-Teller to Fermi strength observed in /sup 13,14/C(p,n) at 492 and 590 MeV

    Ullmann, J.L.; Rapaport, J.; Lisowski, P.W.

    1988-01-01

    It has been recognized for a number of years that certain spin-isospin components of the nucleon-nucleus effective interaction can be inferred from (p,n) reactions to states of known nuclear structure. For L = 0, S = 0 and L = 0, S = 1 transitions, the 0-degree (p,n) cross section can be related respectively to Fermi and Gamow-Teller beta decay matrix elements. If these transitions occur in the same nucleus, the ratio of isovector spin-flip to non-spin-flip effective interactions can be measured without regard for absolute normalization. The best reaction to measure this is /sup 14/C(p,n) which goes by a pure Gamow-Teller transition to the 1/sup /plus// state at 3.95 MeV in /sup 14/N, and Fermi transition to the 2.31 MeV 0/sup /plus// state. This work extends the ratio measurements made at lower energies (ref. 1, 2, 3) to 492 and 590 MeV. We also report on the /sup 13/C(p,n) reaction which goes by a pure GT transition to the 3.51 MeV 3/2/sup /minus// state in /sup 13/N, but by a mixed Fermi plus Gamow-Teller transition to the 1/2/sup /minus// ground state. 11 refs., 4 figs., 2 tabs

  10. Does the delta quench Gamow-Teller strength in (p,n)- and (p vector,p vector')-reactions

    Osterfeld, F.; Schulte, A.; Udagawa, T.; Yabe, M.

    1986-01-01

    Microscopic analyses of complete forward angle intermediate energy (p,n)-, ( 3 He,t)- and (p vector,p vector')-spin-flip spectra are presented for the reactions 90 Zr(p,n), 90 Zr( 3 He,t) and 90 Zr(p vector,p vector'). It is shown that the whole spectra up to high excitation energies (E X ∝50 MeV) are the result of correlated one-particle-one-hole (1p1h) spin-isospin transitions only. The spectra reflect, therefore, the linear spin-isospin response of the target nucleus to the probing external hadronic fields. Our results suggest that the measured (p,n)-, ( 3 He,t)- and (p vector,p vector')-cross sections are compatible with the transition strength predictions as obtained from random phase approximation (RPA) calculations. This means that the Δ isobar quenching mechanism is likely to be rather small. (orig.)

  11. Magnetic Dipole and Gamow-Teller Modes in Neutrino-Nucleus Reactions: Impact on Supernova Dynamics and Nucleosynthesis

    Neumann-Cosel, P. von; Byelikov, A.; Richter, A.; Shevchenko, A.; Adachi, T.; Fujita, Y.; Shimbara, Y.; Fujita, H.; Heger, A.; Kolbe, E.; Langanke, K.; Martinez-Pinedo, G.

    2006-01-01

    Some aspects of the importance of neutrino-induced reactions on nuclei within supernova physics are discussed. It is argued that important constraints on the experimentally unknown cross sections can be obtained from experimental studies of the nuclear response in selected cases. Examples are neutral-current induced reactions on fp-shell nuclei extracted from high-resolution inelastic electron scattering data providing the M1 strength distributions and the production of the exotic heavy, odd-odd nuclei 138La and 180Ta through charged-current reactions dominated by Gamow-Teller transitions. The Gamow-Teller strength can deduced from the (3He,t) charge-exchange reaction at zero degree

  12. Gamow-Teller decay and nuclear deformation: implementing of a new total absorption spectrometer, study of isotopes N ≅ Z krypton and strontium

    Poirier, E.

    2002-12-01

    Nuclei with A ∼ 70 along the N=Z line are known to be the scene of phenomena closely related to the nuclear deformation and are of particular interest since theoretical mean field calculations predict that a large part of the Gamow-Teller resonance might be located below the ground state of the mother nucleus and then be accessible through β-decay studies. These results have shown the effect of the shape of the ground state on the intensity of the Gamow-Teller strength. Thus, the experimental determination, through δ-decay, of the Gamow-Teller strength distribution and the comparison to the theoretical predictions allow to pin down the quadrupolar deformation parameter of the ground state of the parent nucleus. In order to study the neutron deficient isotopes of krypton (A=72,73,74,75) and strontium (A=76,77,78) and to establish the β-strength on the full energy range, a new total absorption spectrometer (TAgS) has been built in the frame of an international collaboration and installed at the (SOLDE/CERN mass separator. For the data analysis, the response function R of the spectrometer has been calculated by means of Monte-Carlo simulations, based on the GEANT4 code, and of a statistical description of the level scheme in the daughter nucleus. The β-feeding distribution has been obtained from experimental spectra through a method based on Bayes theorem and then converted into Gamow-Teller strength. The results coming from the 74 Kr decay analysis allow to describe the ground state of such a nucleus as the coexistence of an oblate shape and of a prolate shape. In the case of 76 Sr, the experimental Gamow-Teller strength distribution strongly indicates a prolate deformation. (author)

  13. Gamow-Teller decay and nuclear deformation: implementing of a new total absorption spectrometer, study of isotopes N {approx_equal} Z krypton and strontium; Decroissance Gamow-Teller et deformation nucleaire: mise en oeuvre d'un nouveau spectrometre a absorption totale, etude d'isotopes N {approx_equal} Z de krypton et strontium

    Poirier, E

    2002-12-01

    Nuclei with A {approx} 70 along the N=Z line are known to be the scene of phenomena closely related to the nuclear deformation and are of particular interest since theoretical mean field calculations predict that a large part of the Gamow-Teller resonance might be located below the ground state of the mother nucleus and then be accessible through {beta}-decay studies. These results have shown the effect of the shape of the ground state on the intensity of the Gamow-Teller strength. Thus, the experimental determination, through {delta}-decay, of the Gamow-Teller strength distribution and the comparison to the theoretical predictions allow to pin down the quadrupolar deformation parameter of the ground state of the parent nucleus. In order to study the neutron deficient isotopes of krypton (A=72,73,74,75) and strontium (A=76,77,78) and to establish the {beta}-strength on the full energy range, a new total absorption spectrometer (TAgS) has been built in the frame of an international collaboration and installed at the (SOLDE/CERN mass separator. For the data analysis, the response function R of the spectrometer has been calculated by means of Monte-Carlo simulations, based on the GEANT4 code, and of a statistical description of the level scheme in the daughter nucleus. The {beta}-feeding distribution has been obtained from experimental spectra through a method based on Bayes theorem and then converted into Gamow-Teller strength. The results coming from the {sup 74}Kr decay analysis allow to describe the ground state of such a nucleus as the coexistence of an oblate shape and of a prolate shape. In the case of {sup 76}Sr, the experimental Gamow-Teller strength distribution strongly indicates a prolate deformation. (author)

  14. Gamow-Teller decay of T = 1 nuclei to odd-odd N = Z nuclei

    Lisetskiy, A F [National Superconducting Cyclotron Laboratory, MSU, East Lansing, MI 48824 (United States); Gelberg, A [Institute for Nuclear Physics, University of Cologne, 50937 Cologne (Germany); Institute of Physical and Chemical Reasearch (RIKEN), Wako, 351-0198 (Japan); Brentano, P von [Institute for Nuclear Physics, University of Cologne, 50937 Cologne (Germany)

    2005-01-01

    Transition strengths of Gamow-Teller decay of T{sub z} = {+-}1 nuclei to N = Z odd-odd nuclei have been calculated in a two-nucleon approximation for spherical and deformed nuclei. The results obtained for the latter are quite close to the values obtained by full-space shell-model calculations and to the experiment.

  15. QRPA estimate for the Δ(1232) cotribution to the Gamow-Teller decay of heavy nuclei

    Suhonen, J.

    1991-01-01

    The contribution of the Δ(1232) isobars to the nuclear beta decay strength function is estimated in the framework of the charge-changing form of the QRPA. This procedure is applied to neutron-deficient tin isotopes. The results imply that the quenching of the low-energy Gamow-Teller decay strength cannot attributed to the presence of delta admixtures in the nuclear wave function. (orig.)

  16. Isospin symmetry of T-z=+/- 3/2 ->+/- 1/2 Gamow-Teller transitions in A=41 nuclei

    Fujita, Y; Shimbara, Y; Adachi, T; Berg, GPA; Fujita, H; Hatanaka, K; Kamiya, J; Nakanishi, K; Sakemi, Y; Sasaki, S; Shimizu, Y; Tameshige, Y; Uchida, M; Wakasa, T; Yosoi, M

    2004-01-01

    Under the assumption that isospin T is a good quantum number, isobaric analog states and various analogous transitions are expected in isobars with mass number A. The, strengths of T-z = +/-3/2 --> 1/2 analogous Gamow-Teller (GT) transitions and analogous M1 transitions within the A = 41 isobar

  17. Isospin symmetry of T-z=+/- 3/2 ->+/- 1/2 Gamow-Teller transitions in A=41 nuclei

    Fujita, Y; Shimbara, Y; Adachi, T; Berg, GPA; Fujita, H; Hatanaka, K; Kamiya, J; Nakanishi, K; Sakemi, Y; Sasaki, S; Shimizu, Y; Tameshige, Y; Uchida, M; Wakasa, T; Yosoi, M

    Under the assumption that isospin T is a good quantum number, isobaric analog states and various analogous transitions are expected in isobars with mass number A. The, strengths of T-z = +/-3/2 --> 1/2 analogous Gamow-Teller (GT) transitions and analogous M1 transitions within the A = 41 isobar

  18. A study of Gamow-Teller transitions for N = Z nuclei, {sup 24}Mg, {sup 28}Si, and {sup 32}S, by a deformed QRPA

    Ha, Eunja; Cheoun, Myung-Ki [Soongsil University, Origin of Matter and Evolution of Galaxy Institute and Department of Physics, Seoul (Korea, Republic of)

    2017-02-15

    We investigated Gamow-Teller (GT) transitions and strength distributions of s-d shell N = Z nuclei, {sup 24}Mg, {sup 28}Si, and {sup 32}S, by a deformed quasi-particle random phase approximation (DQRPA). In the DQRPA, we included particle model space up to p-f shell and considered explicitly the deformation as well as the like- and unlike-pairing correlations. Shell evolution by deformation and attractive force by unlike-pairing correlations turned out to play vital roles to reproduce the experimental GT data. Correlations between the deformation and the pairing correlations are also discussed with the comparison to the experimental data shape. (orig.)

  19. Beta decay of 97Ag: evidence for the Gamow-Teller resonance near 100Sn

    Hu Zhiqiang

    1999-03-01

    In two complementary measurements, a cube like array of 6 Euroball-Cluster germanium detectors and a total-absorption γ-spectrometer were used to investigate the β decay of 97 Ag, a three proton-hole nucleus with respect to the 100 Sn core. The half-life and Q EC value of the decay of the 9/2 + ground-state of 97 Ag were determined to be 25.9(4) s and 6.98(11) MeV respectively. A total of 603 γ rays (578 new) was observed, and 151 levels (132 new) in 97 Pd have been identified. An interesting β-delayed γ cascade was observed, which comprises 6 γ-transitions with a de-excitation pattern involving an initial increase of the level spin. The Gamow-Teller (GT) β-decay strength distributions from the two measurements reveal a large GT resonance around 4 MeV with a width of about 1.8 MeV. The hindrance factor for the total GT strength summed from the ground-state up to 6 MeV excitation energy in 97 Pd, amounts to 4.3(6) with reference to a shell-model prediction. This factor is discussed in comparison with a core-polarization and a Monte-Carlo shell-model calculation. (orig.)

  20. Double Gamow-Teller Transitions and its Relation to Neutrinoless β β Decay

    Shimizu, Noritaka; Menéndez, Javier; Yako, Kentaro

    2018-04-01

    We study the double Gamow-Teller (DGT) strength distribution of 48Ca with state-of-the-art large-scale nuclear shell model calculations. Our analysis shows that the centroid energy of the DGT giant resonance depends mostly on the isovector pairing interaction, while the resonance width is more sensitive to isoscalar pairing. Pairing correlations are also key in neutrinoless β β (0 ν β β ) decay. We find a simple relation between the centroid energy of the 48Ca DGT giant resonance and the 0 ν β β decay nuclear matrix element. More generally, we observe a very good linear correlation between the DGT transition to the ground state of the final nucleus and the 0 ν β β decay matrix element. The correlation, which originates on the dominant short-range character of both transitions, extends to heavier systems including several β β emitters and also holds in energy-density functional results. Our findings suggest that DGT experiments can be a very valuable tool to obtain information on the value of 0 ν β β decay nuclear matrix elements.

  1. Gamow-Teller matrix elements from 00 ( p,n) cross section

    Goodman, C.D.; Goulding, C.A.; Greenfield, M.B.; Rapaport, J.; Bainum, D.E.; Foster, C.C.; Love, W.G.; Petrovich, F.

    1980-01-01

    After simple corrections for distortion effects, 120-MeV, 0 0 (p,n) cross sections are found to be proportional to the squares of the corresponding Fermi and Gamow-Teller matrix elements extracted from β-decay measurements. It is suggested that this proportionality can be used to extract Gamow-Teller matrix elements for transitions inaccessible to β decay

  2. Beta decay of {sup 97}Ag: evidence for the Gamow-Teller resonance near {sup 100}Sn

    Hu Zhiqiang

    1999-03-01

    In two complementary measurements, a cube like array of 6 Euroball-Cluster germanium detectors and a total-absorption {gamma}-spectrometer were used to investigate the {beta} decay of {sup 97}Ag, a three proton-hole nucleus with respect to the {sup 100}Sn core. The half-life and Q{sub EC} value of the decay of the 9/2{sup +} ground-state of {sup 97}Ag were determined to be 25.9(4) s and 6.98(11) MeV respectively. A total of 603 {gamma} rays (578 new) was observed, and 151 levels (132 new) in {sup 97}Pd have been identified. An interesting {beta}-delayed {gamma} cascade was observed, which comprises 6 {gamma}-transitions with a de-excitation pattern involving an initial increase of the level spin. The Gamow-Teller (GT) {beta}-decay strength distributions from the two measurements reveal a large GT resonance around 4 MeV with a width of about 1.8 MeV. The hindrance factor for the total GT strength summed from the ground-state up to 6 MeV excitation energy in {sup 97}Pd, amounts to 4.3(6) with reference to a shell-model prediction. This factor is discussed in comparison with a core-polarization and a Monte-Carlo shell-model calculation. (orig.)

  3. Effect on Tensor Correlations on Gamow- Teller States in 90Zr and 208Pb

    Bai, C. L.; Sagawa, H.; Zhang, H. Q.

    2009-01-01

    The tensor terms of the Skyrme effective interaction are included in the self-consistent Hartree-Fock plus Random Phase Approximation (HF-RPA) model. The Gamow-Teller (GT) strength function of 9 0Z r and 2 08P b are calculated with and without the tensor terms. The main peaks are moved downwards by about 2 MeV when including the tensor contribution. About 10% of the non-energy weighted sum rule is shifted to the excitation energy region above 30 MeV by the RPA tensor correlations. The contribution of the tensor terms to the energy weighted sum rule is given analytically, and compared to the outcome of RPA. A microscopic origin of the quenching of GT sum rule is discussed in relation with the coupling to giant spin-quadrupole excitations by the tensor interactions.(author)

  4. Effect of Tensor Correlations on Gamow-Teller States in 90Zr and 208Pb

    Bai, C. L.; Zhang, H. Q.; Zhang, X. Z.

    2009-01-01

    The tensor terms of the Skyrme effective interaction are included in the self-consistent Hartree-Fock plus Random Phase Approximation (HF-RPA) model. The Gamow-Teller (GT) strength functions of 9 0Z r and 2 08P b is calculated with and without the tensor terms. The main peaks are moved downwards by about 2 MeV when including the tensor contribution. About 10% of the non-energy weighted sum rule is shifted to the excitation energy region above 30 MeV by the RPA tensor correlations. The contribution of the tensor terms to the energy weighted sum rule is given analytically, and compared to the outcome of RPA. A microscopic origin of the quenching of GT sum rule due to the tensor force is discussed.(author)

  5. Gamow-Teller resonances and a separable approximation for Skyrme tensor interactions

    Severyukhin A. P.

    2012-12-01

    Full Text Available A finite rank separable approximation for the quasiparticle random phase approximation (QRPA with Skyrme interactions is applied to study properties of the Gamow-Teller (GT resonances in the neutron-rich Cd isotopes. This approximation enables one to reduce considerably the dimension of matrix that must be diagonalized to perform QRPA calculations in a very large configuration space. Our results from the SGII Skyrme interaction with the tensor interactions and the density-dependent zero-range pairing interaction show that the GT distribution is noticeably modified when the tensor correlations are taken into account. In particular, for 130Cd the dominant peak is moved 3.6 MeV downward and 10% of the GT distribution is shifted to the high excitation energy region near E=50MeV.

  6. High-resolution study of Gamow-Teller transitions in the 47Ti(3He,t)47V reaction

    Ganioǧlu, E.; Fujita, H.; Fujita, Y.; Adachi, T.; Algora, A.; Csatlós, M.; Deaven, J. M.; Estevez-Aguado, E.; Guess, C. J.; Gulyás, J.; Hatanaka, K.; Hirota, K.; Honma, M.; Ishikawa, D.; Krasznahorkay, A.; Matsubara, H.; Meharchand, R.; Molina, F.; Okamura, H.; Ong, H. J.; Otsuka, T.; Perdikakis, G.; Rubio, B.; Scholl, C.; Shimbara, Y.; Susoy, G.; Suzuki, T.; Tamii, A.; Thies, J. H.; Zegers, R. G. T.; Zenihiro, J.

    2013-01-01

    Given the importance of Gamow-Teller (GT) transitions in nuclear structure and astrophysical nuclear processes, we have studied Tz=+3/2→+1/2, GT transitions starting from the 47Ti nucleus in the (3He,t) charge-exchange reaction at 0∘ and at an intermediate incident energy of 140 MeV/nucleon. The experiments were carried out at the Research Center for Nuclear Physics (RCNP), Osaka, using the high-resolution facility with a high-dispersion beam line and the Grand-Raiden spectrometer. With an energy resolution of 20 keV, individual GT transitions were observed and GT strength was derived for each state populated up to an excitation energy (Ex) of 12.5 MeV. The GT strength was widely distributed from low excitation energy up to 12.5 MeV, where we had to stop the analysis because of the high level density. The distribution of the GT strengths was compared with the results of shell model calculations using the GXPF1 interaction. The calculations could reproduce the experimental GT distributions well. The GT transitions from the ground state of 47Ti and the M1 transitions from the isobaric analog state in 47V to the same low-lying states in 47V are analogous. It was found that the ratios of GT transition strengths to the ground state, the 0.088-MeV state, and the 0.146-MeV state are similar to the ratios of the strengths of the analogous M1 transitions from the isobaric analog state (IAS) to these states. The measured distribution of the GT strengths was also compared with those starting from the Tz=+3/2 nucleus 41K to the Tz=+1/2 nucleus 41Ca.

  7. Lorentz-Lorenz quenching for the Gamow-Teller sum rule

    Delorme, J.; Ericson, M.; Figureau, A.

    1984-03-01

    We investigate the modification of the Gamow-Teller sum rule brought in by nucleonic excitations. The general trend of the data is well reproduced. The value of the force which mixes nucleonic and nuclear excitations is discussed

  8. Study of Gamow-Teller giant resonance in /sup 90/Nb by the /sup 90/Zr(/sup 3/He,t)/sup 90/Nb reaction at 90 MeV

    Fujiwara, M.; Fujita, Y.; Katayama, I.; Morinobu, S.; Yamazaki, T.; Itahashi, T.; Ikegami, H. [Osaka Univ., Suita (Japan). Research Center for Nuclear Physics; Hayakawa, S. I.; Ikegami, Hidetsugu; Muraoka, Mitsuo [eds.; Osaka Univ., Suita (Japan). Research Center for Nuclear Physics

    1980-01-01

    A Gamow-Teller giant resonance in /sup 90/Nb was excited by the /sup 90/Zr(/sup 3/He, t) reaction at 89.5 MeV. The strength of the resonance was localized in the energy region of Ex = 4.5 - 7.5 MeV. The transition was found to be dominated by the L = 2 transfer.

  9. Gamow-Teller transitions and neutron-proton-pair transfer reactions

    Van Isacker, P.; Macchiavelli, A. O.

    2018-05-01

    We propose a schematic model of nucleons moving in spin-orbit partner levels, j = l ± 1/2, to explain Gamow-Teller and two-nucleon transfer data in N = Z nuclei above 40Ca. Use of the LS coupling scheme provides a more transparent approach to interpret the structure and reaction data. We apply the model to the analysis of charge-exchange, 42Ca(3He,t)42Sc, and np-transfer, 40Ca(3He,p)42Sc, reactions data to define the elementary modes of excitation in terms of both isovector and isoscalar pairs, whose properties can be determined by adjusting the parameters of the model (spin-orbit splitting, isovector pairing strength and quadrupole matrix element) to the available data. The overall agreement with experiment suggests that the approach captures the main physics ingredients and provides the basis for a boson approximation that can be extended to heavier nuclei. Our analysis also reveals that the SU(4)-symmetry limit is not realized in 42Sc.

  10. Quenching of the Gamow-Teller matrix element in closed LS-shell-plus-one nuclei

    Towner, I.S.

    1989-06-01

    It is evident that nuclear Gamow-Teller matrix elements determined from β-decay and charge-exchange reactions are significantly quenched compared to simple shell-model estimates based on one-body operators and free-nucleon coupling constants. Here we discuss the theoretical origins of this quenching giving examples from light nuclei near LS-closed shells, such as 16 0 and 40 Ca. (Author) 12 refs., 2 tabs

  11. Corrections to the free-nucleon values of the single-particle matrix elements of the M1 and Gamow-Teller operators, from a comparison of shell-model predictions with sd-shell data

    Brown, B.A.; Wildenthal, B.H.

    1983-01-01

    The magnetic dipole moments of states in mirror pairs of the sd-shell nuclei and the strengths of the Gamow-Teller beta decays which connect them are compared with predictions based on mixed-configuration shell-model wave functions. From this analysis we extract the average effective values of the single-particle matrix elements of the l, s, and [Y/sup( 2 )xs]/sup( 1 ) components of the M1 and Gamow-Teller operators acting on nucleons in the 0d/sub 5/2/, 1s/sub 1/2/, and 0d/sub 3/2/ orbits. These results are compared with the recent calculations by Towner and Khanna of the corrections to the free-nucleon values of these matrix elements which arise from the effects of isobar currents, mesonic-exchange currents, and mixing with configurations outside the sd shell

  12. Isospin symmetry of Tz =±3/2→±1/2 Gamow-Teller transitions in A=41 nuclei

    Fujita, Y.; Shimbara, Y.; Adachi, T.; Berg, G. P.; Brown, B. A.; Fujita, H.; Hatanaka, K.; Kamiya, J.; Nakanishi, K.; Sakemi, Y.; Sasaki, S.; Shimizu, Y.; Tameshige, Y.; Uchida, M.; Wakasa, T.; Yosoi, M.

    2004-11-01

    Under the assumption that isospin T is a good quantum number, isobaric analog states and various analogous transitions are expected in isobars with mass number A . The strengths of Tz =±3/2→±1/2 analogous Gamow-Teller (GT) transitions and analogous M1 transitions within the A=41 isobar quartet are compared in detail. The Tz =+3/2→+1/2 GT transitions from the Jπ = 3/2+ ground state of 41K leading to excited Jπ = 1/2+ , 3/2+ , and 5/2+ states in 41Ca were measured using the ( 3He ,t) charge-exchange reaction. With a high energy resolution of 35 keV , many fragmented states were observed, and the GT strength distribution was determined up to 10 MeV excitation energy ( Ex ) . The main part of the strength was concentrated in the Ex =4 6 MeV region. A shell-model calculation could reproduce the concentration, but not so well details of the strength distribution. The obtained distribution was further compared with two results of 41Ti β decay studying the analogous Tz =-3/2→-1/2 GT strengths. They reported contradicting distributions. One-to-one correspondences of analogous transitions and analog states were assigned up to Ex =6 MeV in the comparison with one of these 41Ti β -decay results. Combining the spectroscopic information of the analog states in 41Ca and 41Sc , the most probable Jπ values were deduced for each pair of analog states. It was found that 5/2+ states carry the main part of the observed GT strength, while much less GT strength was carried by 1/2+ and 3/2+ states. The gross features of the GT strength distributions for each J were similar for the isospin analogous Tz =±3/2→±1/2 transitions, but the details were somewhat different. From the difference of the distributions, isospin-asymmetry matrix elements of ≈8 keV were deduced. The Coulomb displacement energy, which is sensitive to the configuration of states, showed a sudden increase of about 50 keV at the excitation energy of 3.8 MeV . The strengths of several M1 transitions to the

  13. Study of the giant Gamow-Teller resonance in nuclear beta-decay

    Dicklage, R.D. von; Hansen, P.G.

    1984-01-01

    A strong effort has been devoted to the development of new target-ion-source systems at ISOLDE which would give higher yields of proton-rich nuclei. The first break-trough has been obtained for the element argon where one recently was able to produce about three orders of magnitude higher yields than in the first experiments. This makes it possible to perform experiments, involving β-delayed protons and gamma-rays, which may give information about the giant Gamow-Teller resonance. This paper gives a report on the status of these experiments

  14. The beta-decay of 48Mn: improved data on Gamow-Teller quenching

    Szerypo, J.; Bazin, D.; Brown, B.A.

    1991-01-01

    Beta-decay studies of very proton-rich nuclides allow to investigate the phenomenon of quenching of Gamow-Teller transitions. A presentation of the experimental techniques is followed by the discussion of preliminray results of the measurements in comparison to shell-model calculations. A corresponding reinvestigation is discussed. A mass-separated 48 Mn beam was used from 12 C( 40 Ca,p3n) reactions. The 48 Mn decay spectroscopy was performed simultaneously in two beam lines of the mass separator. (G.P.) 13 refs.; 2 figs

  15. Gamow-Teller transitions and proton-neutron pair correlation in N =Z odd-odd p -shell nuclei

    Morita, Hiroyuki; Kanada-En'yo, Yoshiko

    2017-10-01

    We have studied the Gamow-Teller (GT) transitions from N =Z +2 neighbors to N =Z odd-odd nuclei in the p -shell region by using isospin-projected and β γ -constraint antisymmetrized molecular dynamics combined with the generator coordinate method. The calculated GT transition strengths from 0+1 states to 1+0 states such as 6He(01+1 ) →6Li(11+0 ) , 10Be(01+1 ) →10B(11+0 ) , and 14C(01+1 ) →14N(12+0 ) exhaust more than 50% of the sum rule. These N =Z +2 initial states and N =Z odd-odd final states are found to dominantly have S =0 ,T =1 n n pairs and S =1 ,T =0 p n pairs, respectively. Based on the two-nucleon (N N ) pair picture, we can understand the concentration of the GT strengths as the spin-isospin-flip transition n n (S =0 ,T =1 )→p n (S =1 ,T =0 ) in L S coupling. The GT transition can be a good probe to identify the spin-isospin partner states with n n pairs and p n pairs of N =Z +2 and N =Z odd-odd nuclei, respectively.

  16. Characteristics of the Gamow-Teller Force in the β- Decay of 40Zr98

    Raden Oktova

    2002-01-01

    The characteristics of the β - decay force for the Gamow-Teller transition in the p-h and the p-p channels in the heavy neutron-rich nucleus 40 Zr 98 have been studied. The ground state single-particle levels in the parent nucleus were calculated self-consistently using the Fayans energy-density functional, and from them the quasi-particle basis was obtained using the BCS model. The residual charge-changing force responsible for the β - transition was taken as having a zero-range (a delta function); in the p-h channel the spin-isospin exchange → σ 1 . → σ 2 → τ 1 . → τ 2 term in the Migdal-Larkin force was used, and that in the p-p channel was a constant. The method employed was the proton-neutron QRPA (pnQRPA). The results show that the proton-neutron pairing p-p force in the Gamow-Teller decay is negligible for the nucleus considered. The value of the p-h force obtained is g ' = 0.735, slightly larger than the standard value of g ' = 0.7 commonly used for stable nuclei. (author)

  17. The structure of the Gamow-Teller giant resonance and consequences for beta-delayed neutron spectra and element synthesis

    Klapdor, H.V.

    1976-01-01

    Recent results in β-delayed neutron emission are interpreted by structure of the Gamow-Teller giant resonance not included in the 'gross-theory' of β-decay. Inclusion of this structure of the β-decay function is important for calculations of β-decay production rates for heavy nuclides by astrophysical processes and thermonuclear explosions. (Auth.)

  18. Gamow-Teller response in the configuration space of a density-functional-theory-rooted no-core configuration-interaction model

    Konieczka, M.; Kortelainen, M.; Satuła, W.

    2018-03-01

    Background: The atomic nucleus is a unique laboratory in which to study fundamental aspects of the electroweak interaction. This includes a question concerning in medium renormalization of the axial-vector current, which still lacks satisfactory explanation. Study of spin-isospin or Gamow-Teller (GT) response may provide valuable information on both the quenching of the axial-vector coupling constant as well as on nuclear structure and nuclear astrophysics. Purpose: We have performed a seminal calculation of the GT response by using the no-core configuration-interaction approach rooted in multireference density functional theory (DFT-NCCI). The model treats properly isospin and rotational symmetries and can be applied to calculate both the nuclear spectra and transition rates in atomic nuclei, irrespectively of their mass and particle-number parity. Methods: The DFT-NCCI calculation proceeds as follows: First, one builds a configuration space by computing relevant, for a given physical problem, (multi)particle-(multi)hole Slater determinants. Next, one applies the isospin and angular-momentum projections and performs the isospin and K mixing in order to construct a model space composed of linearly dependent states of good angular momentum. Eventually, one mixes the projected states by solving the Hill-Wheeler-Griffin equation. Results: The method is applied to compute the GT strength distribution in selected N ≈Z nuclei including the p -shell 8Li and 8Be nuclei and the s d -shell well-deformed nucleus 24Mg. In order to demonstrate a flexibility of the approach we present also a calculation of the superallowed GT β decay in doubly-magic spherical 100Sn and the low-spin spectrum in 100In. Conclusions: It is demonstrated that the DFT-NCCI model is capable of capturing the GT response satisfactorily well by using a relatively small configuration space, exhausting simultaneously the GT sum rule. The model, due to its flexibility and broad range of applicability, may

  19. High-lying Gamow-Teller excited states in the deformed nuclei,76Ge,82Se and N = 20 nuclei in the island of inversion by the Deformed QRPA (DQRPA)

    Cheoun, Myung-Ki; Ha, Eunja

    2013-07-01

    With the advent of high analysis technology in detecting the Gamow-Teller (GT) excited states beyond one nucleon emission threshold, the quenching of the GT strength to the Ikeda sum rule (ISR) seems to be recovered by the high-lying (HL) GT states. We address that these HL GT excited states result from the smearing of the Fermi surface by the increase of the chemical potential owing to the deformation within a framework of the deformed quasi-particle random phase approximation (DQRPA). Detailed mechanism leading to the smearing is discussed, and comparisons to the available experimental data on 76Ge,82Se and N = 20 nuclei are shown to explain the strong peaks on the HL GT excited states.

  20. High-lying Gamow-Teller excited states in the deformed nuclei,76Ge,82Se and N = 20 nuclei in the island of inversion by the Deformed QRPA (DQRPA)

    Cheoun, Myung-Ki; Ha, Eunja

    2013-01-01

    With the advent of high analysis technology in detecting the Gamow-Teller (GT) excited states beyond one nucleon emission threshold, the quenching of the GT strength to the Ikeda sum rule (ISR) seems to be recovered by the high-lying (HL) GT states. We address that these HL GT excited states result from the smearing of the Fermi surface by the increase of the chemical potential owing to the deformation within a framework of the deformed quasi-particle random phase approximation (DQRPA). Detailed mechanism leading to the smearing is discussed, and comparisons to the available experimental data on 76 Ge, 82 Se and N = 20 nuclei are shown to explain the strong peaks on the HL GT excited states

  1. Inelastic electron scattering, fine structure of M1 giant resonances and Gamow-Teller states

    Richter, A.

    1983-01-01

    Recent progress in obtaining detailed fine structure distributions of magnetic giant resonances in nuclei using high resolution inelastic electron scattering at low energy is discussed. Specific examples chosen are the medium heavy nuclei 40 42 44 48 Ca in which M1 excitations are due to neutron spin-flip transitions and the N=28 isotones 50 Ti, 52 Cr and 54 Fe where in addition also proton excitations contribute to the measured M1 strength. It is found that the M1 strength is very fragmented and considerably quenched in comparison to predictions of shell model calculations in a model space that includes up to 2p-2h excitations. Finally, the old problem of M1 strength in 208 Pb is revisited and the results of a form factor measurement of a recently discovered low lying Jsup(π)=1 + state by nuclear resonance fluorescence are presented. (Auth.)

  2. A statistical calculation of the β- strength function

    Arvieu, R.; Haq, R.U.; Touchard, J.

    1976-01-01

    A microscopic calculation of the Gamow-Teller strength between the 0 + ground state of 208 Pb and the 1 + particle-hole states of 208 Bi assuming the particle-hole matrix elements as random numbers with some specified distribution, is described. Under certain conditions for the two-body matrix elements, a G.T. resonance occurs. The stability of this collective state along with the accompanying low energy β - -strength tail is studied for various samples of p-h matrix elements [fr

  3. Sizeable beta-strength in 31Ar (beta 3p) decay

    T. Koldste, G.; Blank, B.; J. G. Borge, M.

    2014-01-01

    We present for the first time precise spectroscopic information on the recently discovered decay mode beta-delayed 3p-emission. The detection of the 3p events gives an increased sensitivity to the high energy part of the Gamow-Teller strength distribution from the decay of 31Ar revealing that as ...... that as much as 30% of the strength resides in the beta-3p decay mode. A simplified description of how the main decay modes evolve as the excitation energy increases in 31Cl is provided....

  4. Structure of β-decay strength functions

    Naumov, Y.V.; Bykov, A.A.; Izosimov, I.N.

    1983-01-01

    The experimental and theoretical studies on the structure of the Gamow--Teller β-decay strength functions are reviewed. Also considered are processes such as M1 γ decay of analog states, the emission of delayed protons, neutrons, and α particles, delayed fission, and the (p, n) reaction at proton energies 100--200 MeV. The results of measurements of the strength functions by γ-ray total absorption are analyzed. It is shown that the β + decay of nuclei far from the stability band exhibits a new type of collective charge-exchange excitation: Gamow--Teller resonance with μ/sub tau/ = +1

  5. Electromagnetic dipole and Gamow-Teller responses of even and odd {sup 90-94}{sub 40}Zr isotopes in QRPA calculations with the D1M Gogny force

    Deloncle, I. [CSNSM, CNRS et Universite Paris-Sud, Orsay (France); CEA, DAM, DIF, Arpajon (France); Peru, S. [CEA, DAM, DIF, Arpajon (France); Martini, M. [ESNT, CEA-Saclay, DSM, Irfu, Service de Physique Nucleaire, Gif-sur-Yvette (France)

    2017-08-15

    In this paper we present theoretical results on the dipole response in the proton spin-saturated {sup 90-94}Zr isotopes. The electric and magnetic dipole excitations are obtained in Hartree-Fock-Bogolyubov plus Quasi-particle Random Phase Approximation (QRPA) calculations performed with the D1M Gogny force. A pnQRPA charge exchange code is used to study the Gamow-Teller response. The results on the pygmy, the giant dipole resonances as well as those on the magnetic nuclear spin-flip excitation and the Gamow-Teller transitions are compared with available experimental or theoretical information. In our approach, the proton pairing plays a role in the phonon excitations, in particular in the M1 nuclear spin-flip resonance. (orig.)

  6. The beta strength function structure in β+ decay of lutetium, thulium and cesium isotopes

    Alkhazov, G.D.; Bykov, A.A.; Vitman, V.D.; Naumov, Yu.V.; Orlov, S.Yu.

    1981-01-01

    The spectra of total γ-absorption in the decays of some Lutecium, Thulium and Cesium isotopes have been measured. The probabilities for level population in the decay of the isotopes have been determined. The deduced beta strength functions reveal pronounced structure. Calculations of the strength functions using the Saxon-Woods potential and the residual Gamow-Teller interaction are presented. It is shown that in β + decay of light Thulium and Cesium isotopes the strength function comprises more than 70% of the Gamow-Teller excitations with μsub(tau) = +1. This result is the first direct observation of the Gamow-Teller resonance in β + decay of nuclei with Tsub(z) > O. (orig.)

  7. Measurement of effective analyzing powers for the NTOF polarimeter at LAMPF and DLL(0 degree) for Gamow-Teller transitions in p-shell nuclei

    Mercer, D.J.

    1993-01-01

    Measurements of neutron polarization from (rvec p,rvec n) reactions can provide valuable clues toward understanding the isovector nucleon-nucleus interaction. A neutron time-of-flight polarimeter has been constructed at the Los Alamos Meson Physics Facility to perform such measurements, but before the polarimeter can be used, its effective analyzing powers must be determined. This is accomplished by using the 14 C(rvec p,rvec n) 14 N reaction at a bombarding energy of 494 MeV to produce a beam of neutrons with known polarization, illuminating the detector with these neutrons, and measuring the azimuthal asymmetries after scattering from a hydrogenous analyzer fluid within the detector. Secondary measurements are made using the 2 H(rvec p,rvec n) 2 p reaction with bombarding energies of 318 and 494 MeV to produce a polarized neutron beam. The results from (rvec np) analyzing reactions within the detector agree with values anticipated from free nucleon-nucleon analyzing powers, but the results from (rvec np) analyzing reactions display a more than 33% reduction from the anticipated values. Additionally, measurements are made of the polarization transfer coefficient D LL (0 degree) for rvec p,rvec n Gamow-Teller reactions on 2 H, 7 Li 12 C, and 14 C targets. For a purely central interaction, one would expect that D LL (0 degree) ∼ -1/3 in the plane wave limit, but a simple average of the Jπ = 0 + → 1 + results at a bombardment energy of 494 MeV gives D LL (0 degree) = -0.689 ± 0.044. Thus, the measurements indicate that the nucleon-nucleus interaction -- which is largely central at 200 MeV -- has strong tensor contributions at higher energy

  8. Beta-decay of {sup 103}In: evidence for the Gamow-Teller resonance near {sup 100}Sn

    Karny, M. [Warsaw Univ. (Poland). Inst. of Experimental Physics; Batist, L.; Brown, B.A. [and others

    1998-04-01

    The {beta} decay of the neutron-deficient isotope {sup 103}In was investigated by using total absorption {gamma}-ray spectrometry on mass-separated sources. The measurement reveals a high-lying resonance of the {beta}-decay strength in striking disagreement with high-resolution {gamma}-ray data. The result is discussed in comparison with shell-model predictions. (orig.)

  9. $\\beta$- decay of $^{58}$Zn. A critical test for the charge-exchange reaction as a probe for the $\\beta$- decay strength distribution

    2002-01-01

    % IS353 \\\\ \\\\ Due to its importance in fundamental physics and astrophysics, a great effort both theoretically and experimentally is devoted to study Gamow Teller (GT)-strength. The GT-strength and its distribution play a key role in late stellar evolution. During the pre-supernova core-collapse of massive stars, the electron capture and nuclear $\\beta$ -decay determine the electron-to-baryon ratio, which influences the infall dynamics and the mass of the final core. The cross-section of the charge-exchange reaction at forward angles with energies above 100~MeV is expected to be proportional to the squares of Fermi and GT matrix elements. This proportionality should provide a Q-value free method to probe the weak interaction strength and renormalization effects in nuclei. Thus charge-exchange reactions are often used to determine the experimental GT-strength. However, the connection between the GT-strength and the cross-section of the charge-exchange reaction is partially model-dependent and the question aris...

  10. Search for magnetic dipole strength and giant spin-flip resonances in heavy nuclei

    Horen, D. J. [Oak Ridge National Lab., TN (USA); Ikegami, H.; Muraoka, M. [eds.; Osaka Univ., Suita (Japan). Research Center for Nuclear Physics

    1980-01-01

    A description is given of the use of high resolution (n, n) scattering and the (p, n) reaction as tools to investigate highly excited states with emphasis on information pertaining to magnetic dipole strength and giant spin-flip resonances in heavy nuclei. It is shown how the ability to uniquely determine the spins and parities of resonances observed in neutron scattering has been instrumental to an understanding of the distribution of M1 strength in sup(207,208)Pb. Some recent results of (p, n) studies with intermediate energy protons are discussed. Energy systematics of the giant Gamow-Teller (GT) resonance as well as a new ..delta..l = 1, ..delta..S = 1 resonance with J sup(..pi..) = (1,2)/sup -/ are presented. It is shown how the (p, n) reaction might be useful to locate M1 strength in heavy nuclei.

  11. Tests of Hadronic Probes of GT Strength

    2002-01-01

    There are many important problems where one wishes to know the distribution of Gamow-Teller (GT) strength in circumstances where it cannot be measured directly (for example, because of energy-release limitations). Then one must rely on hadronic probes to infer the GT strength. It is therefore essential to test these probes as extensively as possible. The isospin-analog transitions in $^{37}$Ca $\\beta^{+}$ -decay and $^{37}$Cl$(p, n)$ provide an excellent ground for such a test. Recent $^{37}$Cl$ (p, n) $ studies, while qualitatively in agreement with our previous ISOLDE work on $^{37}$Ca $\\beta^{+} $ -decay, show quantitative discrepancies that appear to grow as the excitation energy in the residual nuclei increases. Because of the bulk of the GT strengh appears at these high excitation energies, it is important to extend the $\\beta$-decay data to even higher excitation energies where, because of rapidly diminishing phase-space, strong GT transitions correspond to very weak $\\beta$ -branches. We propose to do...

  12. Beta-decay strength and isospin mixing studies in the sd and fp-shells

    Jokinen, A.; Aeystoe, J.; Dendooven, P.; Honkanen, A.; Lipas, P.; Peraejaervi, K.; Oinonen, M.; Siiskonen, T.

    1998-01-01

    We have studied beta decays of M T 41 Ti shows a large, 10(8) %, isospin mixing of IAS and the Gamow-Teller strength is observed to be quenched by a factor of q 2 =0.64. These results can be reproduced qualitatively in our shell model calculations. We have observed for the first time proton and gamma decay of the isobaric analogue state in 23 Mg. Our results on the isospin mixing of the isobaric analogue state agrees well with the shell model calculations. The obtained proton branch of the IAS is used to extract the transition strength for the reaction 22 Na(p,γ) 23 Mg

  13. Effective axial-vector strength and β-decay systematics

    Delion, D. S.; Suhonen, J.

    2014-09-01

    We use the weak axial-vector coupling strength g_{\\text{A}} as a key parameter to reproduce simultaneously the available data for both the Gamow-Teller \\beta^- and \\beta^+/\\text{EC} decay rates in nine triplets of isobars with mass numbers A=70,78,100,104,106,110,116,128,130 . We use the proton-neutron quasiparticle random-phase approximation (pnQRPA) with schematic dipole interaction containing particle-particle and particle-hole parts with mass-dependent strengths. Our analysis points to a strongly quenched effective value g_{\\text{A}}\\approx 0.3 , with a relative error of 28%. We then perform a systematic computation of 218 experimentally known \\beta^- and \\beta^+/\\text{EC} decays with quite a remarkable success. The presently extracted value of g_{\\text{A}} should be taken as an effective one, specific for a given nuclear theory framework. Present studies suggest that the effective g_{\\text{A}} is suitable for the description of decay transitions to 1^+ states at moderate excitation, below the Gamow-Teller giant resonance region.

  14. Nuclear structure information from nucleon-nucleus scattering experiments at TRIUMF

    Haeusser, O.

    1989-02-01

    We discuss a variety of forward-angle measurements of cross sections for (n,p), (p,p') and (p,n) reactions which were carried out using the medium-resolution spectrometer (MRS) at TRIUMF. The ratio of L=0 isovector spinflip cross section and Gamow-Teller strength has been investigated at 200-450 MeV for several strong transitions of known B(GT) in p-shell nuclei. Isospin symmetry in N-nucleus reactions has been tested for Gamow-Teller transitions to isospin triads in A=6 and A=12 nuclei. The prospects of identifying orbital and meson exchange current contributions in M1 transitions from a state-by-state comparison of M1 and Gamow-Teller strength in sd shell nuclei are discussed. Finally we describe a test of the Gamow-Teller sum rule in 54 Fe where both S - and S + strength are substantial and have been extracted from a multipole decomposition of (p,n) and (n,p) angular distributions

  15. Energy dependence of the ratio of isovector effective interaction strengths |JστJτ| from 0° (p,n) cross sections

    Taddeucci, T. N.; Rapaport, J.; Bainum, D. E.; Goodman, C. D.; Foster, C. C.; Gaarde, C.; Larsen, J.; Goulding, C. A.; Horen, D. J.; Masterson, T.; Sugarbaker, E.

    1982-02-01

    Information concerning the ratio of the isovector effective interaction strengths |JστJτ| may be obtained from the ratio of (p,n) Gamow-Teller and isobaric analog state 0° differential cross sections. We have examined 0° (p,n) data for the energy range 5-200 MeV and find that for energies larger than 50 MeV and for targets with A=7-42 the product of the interaction-strength and distortion-factor ratios |JστJτ|(NστNτ)12 appears to be mass independent and linear as a function of bombarding energy. NUCLEAR REACTIONS 7Li, 13, 14C, 26Mg, 37Cl, 41Ca(p,n), measured σ(θ=0°), GT, IAS transitions, Ep=60-200 MeV. Deduced energy dependence, interaction strength ratio |JστJτ|.

  16. Distribution of crushing strength of tablets

    Sonnergaard, Jørn

    2002-01-01

    The distribution of a given set of data is important since most parametric statistical tests are based on the assumption that the studied data are normal distributed. In analysis of fracture mechanics the Weibull distribution is widely used and the derived Weibull modulus is interpreted as a mate...... data from nine model tablet formulations and four commercial tablets are shown to follow the normal distribution. The importance of proper cleaning of the crushing strength apparatus is demonstrated....

  17. Nuclear structure calculations in $^{20}$Ne with No-Core Configuration-Interaction model

    Konieczka, Maciej; Satuła, Wojciech

    2016-01-01

    Negative parity states in $^{20}$Ne and Gamow-Teller strength distribution for the ground-state beta-decay of $^{20}$Na are calculated for the very first time using recently developed No-Core Configuration-Interaction model. The approach is based on multi-reference density functional theory involving isospin and angular-momentum projections. Advantages and shortcomings of the method are briefly discussed.

  18. Statistical Analysis Of Failure Strength Of Material Using Weibull Distribution

    Entin Hartini; Mike Susmikanti; Antonius Sitompul

    2008-01-01

    In evaluation of ceramic and glass materials strength a statistical approach is necessary Strength of ceramic and glass depend on its measure and size distribution of flaws in these material. The distribution of strength for ductile material is narrow and close to a Gaussian distribution while strength of brittle materials as ceramic and glass following Weibull distribution. The Weibull distribution is an indicator of the failure of material strength resulting from a distribution of flaw size. In this paper, cumulative probability of material strength to failure probability, cumulative probability of failure versus fracture stress and cumulative probability of reliability of material were calculated. Statistical criteria calculation supporting strength analysis of Silicon Nitride material were done utilizing MATLAB. (author)

  19. Allowed Gamow-Teller excitations from the ground state of N-14

    Aroua, S.; Navrátil, Petr; Zamick, L.; Fayche, M. S.; Barret, B. R.; Vary, J. P.; Heyde, K.

    2003-01-01

    Roč. 720, 1/2 (2003), s. 71-83 ISSN 0375-9474 Institutional research plan: CEZ:AV0Z1048901 Keywords : core shell-model * tensor interactions * light-nuclei Subject RIV: BE - Theoretical Physics Impact factor: 1.761, year: 2003

  20. Dipole strength distributions from HIGS Experiments

    Werner, V.; Cooper, N.; Goddard, P. M.; Humby, P.; Ilieva, R. S.; Rusev, G.; Beller, J.; Bernards, C.; Crider, B. P.; Isaak, J.; Kelley, J. H.; Kwan, E.; Löher, B.; Peters, E. E.; Pietralla, N.; Romig, C.; Savran, D.; Scheck, M.; Tonchev, A. P.; Tornow, W.; Yates, S. W.; Zweidinger, M.

    2015-05-01

    A series of photon scattering experiments has been performed on the double-beta decay partners 76Ge and 76Se, in order to investigate their dipole response up to the neutron separation threshold. Gamma-ray beams from bremsstrahlung at the S-DALINAC and from Compton-backscattering at HIGS have been used to measure absolute cross sections and parities of dipole excited states, respectively. The HIGS data allows for indirect measurement of averaged branching ratios, which leads to significant corrections in the observed excitation cross sections. Results are compared to statistical calculations, to test photon strength functions and the Axel-Brink hypothesis

  1. Dipole strength distributions from HIGS Experiments

    Werner V.

    2015-01-01

    76Ge and 76Se, in order to investigate their dipole response up to the neutron separation threshold. Gamma-ray beams from bremsstrahlung at the S-DALINAC and from Compton-backscattering at HIGS have been used to measure absolute cross sections and parities of dipole excited states, respectively. The HIGS data allows for indirect measurement of averaged branching ratios, which leads to significant corrections in the observed excitation cross sections. Results are compared to statistical calculations, to test photon strength functions and the Axel-Brink hypothesis

  2. FRB strength distribution challenges the cosmological principle

    Katz, J. I.

    2017-11-01

    The distribution of fast radio burst (FRB) fluxes and fluences is characterized by a few very bright events and a deficiency of fainter events, compared to expectations for a homogeneous space-filling distribution. I define a metric to quantify this, and apply it to the 17 presently known Parkes FRB, products of a comparatively homogeneous search. With 98 per cent confidence, we reject the hypothesis of a homogeneous distribution in Euclidean space. Possible explanations include a reduction of fainter events by cosmological redshifts or evolution or a cosmologically local concentration of events. The former is opposed by the small value of the one known FRB redshift. The latter contradicts the Cosmological Principle, but may be explained if the brighter FRB originates in the Local Supercluster.

  3. Measurement of agglomerate strength distributions in agglomerated powders

    Ciftcioglu, M.; Aking, M.; Burkhart, L.

    1986-01-01

    Strength distributions of particle agglomerates in six different yttria powders were measured using a calibrated ultrasonic sound field. The density of sintered pellets was directly related to the agglomerate strength of each powder. No systematic relation to the sintered density was observed for bulk densities or pressure-density compaction data for the loose powders, or for pore size distributions or green densities for the pressed compacts

  4. Effect of symmetry breaking on transition strength distributions

    Mitchell, G.E.; Shriner, J.F. Jr.

    2001-01-01

    The quantum numbers of over 100 states in 30 P have been determined from the ground state to 8 MeV. Previous measurements had provided complete spectroscopy in 26 Al. For these N=Z=odd nuclei, states of isospin T=0 and T=1 coexist at all energies. These spectra provide a unique opportunity to test the effect of symmetry breaking (of the approximate symmetry isospin) on the level statistics and on the transition strength distributions. The level statistics are strongly affected by the small symmetry breaking and the transition strength distributions differ from the Porter-Thomas distribution

  5. History of Giant Resonances and Quenching

    Arima, A

    1999-01-01

    The history of nuclear magnetic moments and Gamow-Teller transitions is reviewed. The importance of configuration mixing and core polarization to explain the quenching phenomena is shown, and discussed in the context of the recent measurement of the Gamow-Teller strength in sup 9 sup 0 Nb. It is confirmed that the contribution of the DELTA-hole excitation to the quenching of spin matrix elements is small.

  6. Stress-strength reliability for general bivariate distributions

    Alaa H. Abdel-Hamid

    2016-10-01

    Full Text Available An expression for the stress-strength reliability R=P(X1distribution. Such distribution includes bivariate compound Weibull, bivariate compound Gompertz, bivariate compound Pareto, among others. In the parametric case, the maximum likelihood estimates of the parameters and reliability function R are obtained. In the non-parametric case, point and interval estimates of R are developed using Govindarajulu's asymptotic distribution-free method when X1 and X2 are dependent. An example is given when the population distribution is bivariate compound Weibull. Simulation is performed, based on different sample sizes to study the performance of estimates.

  7. Strength distribution of γ-transitions deexciting superdeformed rotational bands

    Lopez-Martens, A.P.; Doesing, T.; Khoo, T.L.; Korichi, A.; Hannachi, F.; Calderin, I.J.; Lauritsen, T.; Ahmad, I.; Carpenter, M.P.; Fischer, S.M.; Hackman, G.; Janssens, R.V.F.; Nisius, D.; Reiter, P.; Amro, H.; Moore, E.F.

    1999-01-01

    The strength distribution of the γ rays in the decay-out from superdeformed (SD) states is investigated by applying the maximum likelihood method, with special emphasis on the influence of the lower threshold given by experimental conditions. Clear graphical solutions are found, and a careful estimation of the dispersion in the values of the number of degrees of freedom and of the average strength of the most likely χ 2 distribution is carried out. For the 194 Hg nucleus, 41 primary transitions from the decay-out of SD states are identified above 2600 keV. It is concluded that they represent the strongest 10% of the transitions selected stochastically from a Porter-Thomas distribution. This would support the scenario of a statistical decay of SD states via coupling to a compound state at normal deformation. However, the occurrence of several very strong direct one-step transitions as previously observed in 194 Hg has a very small probability of the order of 10 -4 . This may indicate special selection rules governing the decay. However, based on the absence of strong primary transitions from SD states in adjacent nuclei, the situation in 194 Hg is viewed as a very lucky incidence

  8. Electrical dipole polarizability and spin M1 strength from {sup 48}Ca(p,p') data under 0; Elektrische Dipol-Polarisierbarkeit und Spin-M1-Staerke aus {sup 48}Ca(p,p')-Daten unter 0

    Birkhan, Jonny Hubertus

    2016-07-01

    only up to an excitation energy of 60 MeV. Taking into account the excitation energy range from E{sub x}=10 MeV to E{sub x}=60 MeV the polarisability of the nucleus {sup 48}Ca was estimated to be α{sub D}=(2.09±0.02) fm{sup 3}. This result deviates significantly from a theoretical prediction of α{sub D}=(2.31±0.09) fm{sup 3} based on the energy density functional theory. The result of this work could further constrain the range of the parameters of the nuclear models and might give new insights on the neutron skin thickness of {sup 48}Ca as far as a theoretical prediction for the correlation between the polarisability and neutron skin thickness is available especially for the energy region investigated in this work. In the nucleus {sup 48}Ca, almost the full experimentally accessible spin-M1 strength is exhausted by a single spin-flip transition. The corresponding state is the prominent 1{sup +}-state at E{sub x}=10.22 MeV. The configuration of the nucleus {sup 48}Ca leads to nearly pure spin-flip transitions of the neutrons. In this case the isoscalar transition matrix element is as large as the isovector one. This means that the nucleus {sup 48}Ca is a reference case whereas the nucleus {sup 208}Pb is another one because its isoscalar and isovector M1 strength is well separated. The extraction of the total electromagnetic M1 strength was based on a method that had been successfully applied to Gamow-Teller transitions in other analyses in the framework of a distorted wave impulse approximation. This method allows to calculate the strength from the measured isovector cross section at θ{sub CM}=0 mainly by a single conversion factor, the so-called ''unit cross section''. The method was used for the analysis of this work assuming that isospin symmetry is given for isobars and that the unit cross section is the same for isovector spin-M1 excitations as well as for the excitations of analogue states. The problem was to extract the isovector part of

  9. Low lying magnetic dipole strength distribution in 176Hf

    Kuliev, A. A.; Ertugral, F.; Yakut, H.; Bektasoglu, M.; Guliyev, E.

    2006-01-01

    In this study the scissors mode 1 + states are systematically investigated within the rotational invariant Quasiparticle Random Phase Approximation (QRPA) for 1 76Hf isotopes. We consider the 1 + vibrations generated by the isovector spin-spin interactions and the isoscalar (h 0 ) and isovector (h 1 ) quadrupole type separable forces restoring the broken symmetry by a deformed mean field. It has been shown that restoration of the broken rotational symmetry of the Hamiltonian essentially decreases the B(M1) value of the low lying 1 + states and increases the collectivization of the scissors mode excitations in the spectroscopic energy region. Agreement between the calculated mean excitation energies as well as the summed B(M1) value of the scissors mode excitations and the available experimental data of 1 76Hf is rather good. For instance, distributions of the calculated B(M1) transition strengths in the 1 76 Hf isotopes with respect to K π =1 + excitations is represented in Figure. Thus, we see that the models which use the Hamiltonian with broken rotational symmetry strongly overestimate the M1 strength at low energy. These results indicate an importance of the models which are free from the low-energy spurious states. The marked differences between the results for 1 + states, calculated in rotational invariant (RI) and non-rotational invariant (NRI) model indicate the importance of the approaches which are free from spurious low-energy solutions. A separation of the rotational state from the 1 + states changes somewhat the distribution of the B(M1) strength in the spectroscopic energy region and increases the fragmentation of the scissors mode 1 + excitations in agreement with the experimental data

  10. Computational nuclear structure: Challenges, rewards, and prospects

    Dean, D.J.

    1997-12-01

    The shell model Monte Carlo technique (SMMC) transforms the traditional nuclear shell model problem into a path-integral over auxiliary fields. Applications of the method to studies of various properties of fp-shell nuclei, including Gamow-Teller strengths and distributions, are reviewed. Part of the future of nuclear structure physics lies in the study of nuclei far from beta-stability. The author discusses preliminary work on proton deficient Xe isotopes, and on neutron rich nuclei in the sd-Jp shells

  11. Shape effects along the Z=82 line: study of the $\\beta$- decay of $^{188,190,192}$Pb using total absorption spectroscopy

    Caballero ontanaya, L; Garcia borge, M J; Malbrunot, S

    2002-01-01

    This proposal is aimed at the study of the $\\beta$- decay of the neutron-deficient $^{188,190,192}$Pb nuclei. The main motivation of the proposed experiment is to determine the Gamow-Teller strength distribution in the daughter nuclei using the Total Absorption Spectrometer "Lucrecia". Recent theoretical results show that from this measurement the shapes of the ground states of the decaying Pb nuclei can be inferred. This study offers an independent way to study the phenomenon of shape co-existence in a region of particular interest.

  12. Statistical theory for calculating energy spectra of β-delayed neutrons

    Kawano, Toshihiko; Moeller, Peter; Wilson, William B.

    2008-01-01

    Theoretical β-delayed neutron spectra are calculated based on the Quasi-particle Random Phase Approximation (QRPA) and the Hauser-Feshbach statistical model. Neutron emissions from an excited daughter nucleus after β-decay to the granddaughter residual are more accurately calculated than previous evaluations, including all the microscopic nuclear structure information, such as a Gamow-Teller strength distribution and discrete states in the granddaughter. The calculated delayed-neutron spectra reasonably agree with those evaluations in the ENDF decay library, which are based on experimental data. The model was adopted to generate the delayed-neutron spectra for all 271 precursors. (authors)

  13. Studies of the $\\beta$-decay of Sr nuclei on and near the N=Z Line with a Total Absorption Gamma-ray Spectrometer

    Marechal, F; Caballero ontanaya, L

    2002-01-01

    In the framework of the investigation of the shapes of the ground states of the parent nucleus, we propose to carry out measurements of the complete Gamow-Teller strength distribution for the $^{76-80}$Sr isotopes, with a new Total Absorption Gamma Spectrometer installed on a new beam line. The results will be compared with theoretical calculations based on the mean field approach. A brief report on the IS370 experiment on $^{72-75}$Kr decay, which was recently performed at ISOLDE, will be given and the performance of the sum spectrometer will be presented.

  14. Weak interaction rates for Kr and Sr waiting-point nuclei under rp-process conditions

    Sarriguren, P.

    2009-01-01

    Weak interaction rates are studied in neutron deficient Kr and Sr waiting-point isotopes in ranges of densities and temperatures relevant for the rp process. The nuclear structure is described within a microscopic model (deformed QRPA) that reproduces not only the half-lives but also the Gamow-Teller strength distributions recently measured. The various sensitivities of the decay rates to both density and temperature are discussed. Continuum electron capture is shown to contribute significantly to the weak rates at rp-process conditions.

  15. Deformation of the N=Z nucleus $^{76}$Sr using $\\beta$-decay studies

    Nacher, E; Rubio, B; Taín, J L; Cano-Ott, D; Courtin, S; Dessagne, P; Maréchal, F; Miehé, C; Poirier, E; García-Borge, M J; Escrig, D; Jungclaus, A; Sarriguren, P; Tengblad, O; Gelletly, W; Fraile-Prieto, L M; Le Scornet, G; Dessagne, Ph.; Miehe, Ch.

    2004-01-01

    A novel method of deducing the deformation of the N=Z nucleus $^{76}$Sr is presented. It is based on the comparison of the experimental Gamow-Teller strength distribution B(GT) from its $\\beta$-decay with the results of QRPA calculations. This method confirms previous indications of the strong prolate deformation of this nucleus in a totally independent and novel way. The measurement has been carried out with a large Total Absorption Gamma Spectrometer, "Lucrecia", newly installed at CERN-ISOLDE.

  16. Ionic strength independence of charge distributions in solvation of biomolecules

    Virtanen, J. J. [Department of Chemistry, University of Chicago, Chicago, Illinois 60637 (United States); James Franck Institute, University of Chicago, Chicago, Illinois 60637 (United States); Sosnick, T. R. [Department of Biochemistry and Molecular Biology, Institute for Biophysical Dynamics, University of Chicago, Chicago, Illinois 60637 (United States); Computation Institute, University of Chicago, Chicago, Illinois 60637 (United States); Freed, K. F. [Department of Chemistry, University of Chicago, Chicago, Illinois 60637 (United States); James Franck Institute, University of Chicago, Chicago, Illinois 60637 (United States); Computation Institute, University of Chicago, Chicago, Illinois 60637 (United States)

    2014-12-14

    Electrostatic forces enormously impact the structure, interactions, and function of biomolecules. We perform all-atom molecular dynamics simulations for 5 proteins and 5 RNAs to determine the dependence on ionic strength of the ion and water charge distributions surrounding the biomolecules, as well as the contributions of ions to the electrostatic free energy of interaction between the biomolecule and the surrounding salt solution (for a total of 40 different biomolecule/solvent combinations). Although water provides the dominant contribution to the charge density distribution and to the electrostatic potential even in 1M NaCl solutions, the contributions of water molecules and of ions to the total electrostatic interaction free energy with the solvated biomolecule are comparable. The electrostatic biomolecule/solvent interaction energies and the total charge distribution exhibit a remarkable insensitivity to salt concentrations over a huge range of salt concentrations (20 mM to 1M NaCl). The electrostatic potentials near the biomolecule's surface obtained from the MD simulations differ markedly, as expected, from the potentials predicted by continuum dielectric models, even though the total electrostatic interaction free energies are within 11% of each other.

  17. Ionic strength independence of charge distributions in solvation of biomolecules

    Virtanen, J. J.; Sosnick, T. R.; Freed, K. F.

    2014-01-01

    Electrostatic forces enormously impact the structure, interactions, and function of biomolecules. We perform all-atom molecular dynamics simulations for 5 proteins and 5 RNAs to determine the dependence on ionic strength of the ion and water charge distributions surrounding the biomolecules, as well as the contributions of ions to the electrostatic free energy of interaction between the biomolecule and the surrounding salt solution (for a total of 40 different biomolecule/solvent combinations). Although water provides the dominant contribution to the charge density distribution and to the electrostatic potential even in 1M NaCl solutions, the contributions of water molecules and of ions to the total electrostatic interaction free energy with the solvated biomolecule are comparable. The electrostatic biomolecule/solvent interaction energies and the total charge distribution exhibit a remarkable insensitivity to salt concentrations over a huge range of salt concentrations (20 mM to 1M NaCl). The electrostatic potentials near the biomolecule's surface obtained from the MD simulations differ markedly, as expected, from the potentials predicted by continuum dielectric models, even though the total electrostatic interaction free energies are within 11% of each other

  18. Contribution of the radioactive decay to the study of the structure of N=Z nuclei of mass A>70

    Longour, Christophe

    1999-01-01

    Radioactive decay study gives an access to the interaction which rules the β decay process as well as the structure of the nuclear states involved. This work describes the observation of the decay of N = Z nuclei with mass A > 70. For the odd-odd N = Z nuclei 78 Y, 82 Nb and 86 Tc, the decay has been established as superallowed Fermi type transitions. The results pave the way for more precise measurements and extend the mass range nowadays used to understand the behaviour of the weak interaction in the nuclear matter. The observation of the decay of the even-even N = Z 72 Kr leads us to build the Gamow-Teller strength distribution from which some clues about the ground state deformation of this isotope can be obtained. More complete experimental observation and some developments of the calculations used to interpret the distribution of the Gamow-Teller strength are needed. Finally, this work describes the developments and tests of a prototype detector the aim of which to determine the contribution of β particles to energy distribution observed in germanium detector. The tests we have performed show that this prototype can identify and reject 80% of the β particles emitted by a source with a 2,3 MeV end-point. The very satisfactory performances of this prototype need now to be confirmed under experimental conditions. (author)

  19. Impact of electron-captures on nuclei near N = 50 on core-collapse supernovae

    Titus, R.; Sullivan, C.; Zegers, R. G. T.; Brown, B. A.; Gao, B.

    2018-01-01

    The sensitivity of the late stages of stellar core collapse to electron-capture rates on nuclei is investigated, with a focus on electron-capture rates on 74 nuclei with neutron number close to 50, just above doubly magic 78Ni. It is demonstrated that variations in key characteristics of the evolution, such as the lepton fraction, electron fraction, entropy, stellar density, and in-fall velocity are about 50% due to uncertainties in the electron-capture rates on nuclei in this region, although thousands of nuclei are included in the simulations. The present electron-capture rate estimates used for the nuclei in this high-sensitivity region of the chart of isotopes are primarily based on a simple approximation, and it is shown that the estimated rates are likely too high, by an order of magnitude or more. Electron-capture rates based on Gamow-Teller strength distributions calculated in microscopic theoretical models will be required to obtain better estimates. Gamow-Teller distributions extracted from charge-exchange experiments performed at intermediate energies serve to guide the development and benchmark the models. A previously compiled weak-rate library that is used in the astrophysical simulations was updated as part of the work presented here, by adding additional rate tables for nuclei near stability for mass numbers between 60 and 110.

  20. Nuclear Structure Calculations for Two-Neutrino Double-β Decay

    P. Sarriguren

    2016-01-01

    Full Text Available We study the two-neutrino double-β decay in 76Ge, 116Cd, 128Te, 130Te, and 150Nd, as well as the two Gamow-Teller branches that connect the double-β decay partners with the states in the intermediate nuclei. We use a theoretical microscopic approach based on a deformed self-consistent mean field with Skyrme interactions including pairing and spin-isospin residual forces, which are treated in a proton-neutron quasiparticle random-phase approximation. We compare our results for Gamow-Teller strength distributions with experimental information obtained from charge-exchange reactions. We also compare our results for the two-neutrino double-β decay nuclear matrix elements with those extracted from the measured half-lives. Both single-state and low-lying-state dominance hypotheses are analyzed theoretically and experimentally making use of recent data from charge-exchange reactions and β decay of the intermediate nuclei.

  1. Strength distributions of electromagnetic transitions in light nuclei

    Kostin, V.Ya.; Koval', A.A.; Kopanets, E.G.; Tsytko, S.P.

    1980-01-01

    Distributions of probabilities of electromagnetic transitions from resonance levels of light nuclei with masses A=Z-40 for eight types of transition (epsilon1, epsilon2, M1, M8, isoscalar and isovector) are obtained. Recommended upper limits (RUL) of transition probabilities are determined for each type of transitions. A comparison with analogous characteristics for transitions between bound states is carried out. It has been causes found that RUL for resonance states substantially differ from RUL for transitions between bound states. Possible causes of such difference are discussed

  2. The Analysis of the Strength, Distribution and Direction for the EEG Phase Synchronization by Musical Stimulus

    Ogawa, Yutaro; Ikeda, Akira; Kotani, Kiyoshi; Jimbo, Yasuhiko

    In this study, we propose the EEG phase synchronization analysis including not only the average strength of the synchronization but also the distribution and directions under the conditions that evoked emotion by musical stimuli. The experiment is performed with the two different musical stimuli that evoke happiness or sadness for 150 seconds. It is found that the average strength of synchronization indicates no difference between the right side and the left side of the frontal lobe during the happy stimulus, the distribution and directions indicate significant differences. Therefore, proposed analysis is useful for detecting emotional condition because it provides information that cannot be obtained only by the average strength of synchronization.

  3. Nucleus as a chiral filter: the role of the Δ(1232)

    Rho, Mannque.

    1982-03-01

    We describe how two different modes of chiral symmetry can be seen in nuclei. In particular, it is shown that the nuclear axial charge or more precisely the O + O - , ΔT=1 transition at zero momentum transfer probe the nuclear configuration wherein the axial charge gsub(A) is effectively enhanced in nuclear medium due to soft pions, symptomatic of the Goldstone realization of chiral symmetry in the medium while the Gamow-Teller resonances probe the configuration wherein soft pions are no longer operative, suggesting an approach toward the Wigner realization of chiral symmetry. Using the celebrated Adler-Weisberger relation, it is argued that the observed approximately 50% quenching of the Gamow-Teller strength reflects the possibility that the Gamow-Teller operator sees the quarks inside the bag, blind to the Goldstone vacuum outside. Some implications on chiral phase transitions are also discussed

  4. The effect of wall thickness distribution on mechanical reliability and strength in unidirectional porous ceramics

    Seuba, Jordi; Deville, Sylvain; Guizard, Christian; Stevenson, Adam J.

    2016-01-01

    Macroporous ceramics exhibit an intrinsic strength variability caused by the random distribution of defects in their structure. However, the precise role of microstructural features, other than pore volume, on reliability is still unknown. Here, we analyze the applicability of the Weibull analysis to unidirectional macroporous yttria-stabilized-zirconia (YSZ) prepared by ice-templating. First, we performed crush tests on samples with controlled microstructural features with the loading direction parallel to the porosity. The compressive strength data were fitted using two different fitting techniques, ordinary least squares and Bayesian Markov Chain Monte Carlo, to evaluate whether Weibull statistics are an adequate descriptor of the strength distribution. The statistical descriptors indicated that the strength data are well described by the Weibull statistical approach, for both fitting methods used. Furthermore, we assess the effect of different microstructural features (volume, size, densification of the walls, and morphology) on Weibull modulus and strength. We found that the key microstructural parameter controlling reliability is wall thickness. In contrast, pore volume is the main parameter controlling the strength. The highest Weibull modulus (?) and mean strength (198.2 MPa) were obtained for the samples with the smallest and narrowest wall thickness distribution (3.1 ?m) and lower pore volume (54.5%).

  5. Sum rules for nuclear excitations with the Skyrme-Landau interaction

    Liu Kehfei; Luo Hongde; Ma Zhongyu; Feng Man; Shen Qingbiao

    1991-01-01

    The energy-weighted sum rules for electric, magnetic, Fermi and Gamow-Teller transitions with the Skyrme-Landau interaction are derived from the double commutators and numerically calculated in a HF + RPA formalism. As a numerical check of the Thouless theorem, our self-consistent calculations show that the calculated RPA strengths exhaust more than 85% of the sum rules in most cases. The well known non-energy-weighted sum rules for Fermi and Gamow-Teller transitions are also checked numerically. The sum rules are exhausted by more than 94% in these cases. (orig.)

  6. Spreading effects on the isovector dipole strength distribution in 208Pb

    Adachi, S.; Nguyen van Giai

    1984-01-01

    There is seemingly a difficulty with all Hartree-Fock RPA calculations to describe correctly the distribution of dipole strength in heavy nuclei above the giant dipole region. We investigate in a consistent framework the effects of damping into more complex configurations. We show that in 208 Pb, this damping leads to a smooth distribution at higher energies while it gives a satisfactory description of the spreading width of the giant dipole resonance. (orig.)

  7. Distribution of photon strength in nuclei by a method of two-step cascades

    Becvar, F.; Cejnar, P.; Kopecky, J.

    1990-01-01

    The applicability of sum-coincidence measurements of two-step cascade γ-ray spectra to the determination of photon strength functions at intermediate γ-ray energies (3 or 4 MeV) is discussed. An experiment based on thermal neutron capture in Nd was undertaken at the Brookhaven National Laboratory High Flux Beam Reactor to test this model. To understand the role of various uncertainties in similar experiments a series of model calculations was performed. We present an analysis of our experimental data which demonstrates the high sensitivity of the method to E1 and M1 photon strength functions. Our experimental data are in sharp contradiction to those expected from an E1 photon strength distributed according to the classical Lorentzian form with an energy invariant damping width. An alternative distribution of Kadmenskij et al., which violates Brink's Hypothesis, is strongly preferred. 13 refs., 5 figs

  8. Carbon fiber/carbon nanotube reinforced hierarchical composites: Effect of CNT distribution on shearing strength

    Zhou, H. W.; Mishnaevsky, Leon; Yi, H. Y.

    2016-01-01

    The strength and fracture behavior of carbon fiber reinforced polymer composites with carbon nanotube (CNT) secondary reinforcement are investigated experimentally and numerically. Short Beam Shearing tests have been carried out, with SEM observations of the damage evolution in the composites. 3D...... CNT nanoreinforcement into the matrix and/or the sizing of carbon fiber/reinforced composites ensures strong increase of the composite strength. The effect of secondary CNTs reinforcement is strongest when some small addition of CNTs in the polymer matrix is complemented by the fiber sizing with high...... multiscale computational (FE) models of the carbon/polymer composite with varied CNT distributions have been developed and employed to study the effect of the secondary CNT reinforcement, its distribution and content on the strength and fracture behavior of the composites. It is shown that adding secondary...

  9. Experimental study of the E2 strength distribution in the 12C and 16O nuclei

    Buenerd, M.; California Univ., Berkeley; Gelbke, C.K.; Hendrie, D.L.; Mahoney, J.; Olmer, C.; Scott, D.K.

    1977-01-01

    The distribution of the E2 strength in 12 C and 16 O nuclei is investigated by inelastic scattering of 3 He. The giant quadrupole resonance is found to be splitted into several states in both nuclei and exhausts 31% and 37% of the quadrupole energy weighted sum rule (EWSR) in 12 C and 16 O respectively

  10. Estimation of Received Signal Strength Distribution for Smart Meters with Biased Measurement Data Set

    Kielgast, Mathias Rønholt; Rasmussen, Anders Charly; Laursen, Mathias Hjorth

    2017-01-01

    This letter presents an experimental study and a novel modelling approach of the wireless channel of smart utility meters placed in basements or sculleries. The experimental data consist of signal strength measurements of consumption report packets. Since such packets are only registered if they ......This letter presents an experimental study and a novel modelling approach of the wireless channel of smart utility meters placed in basements or sculleries. The experimental data consist of signal strength measurements of consumption report packets. Since such packets are only registered...... if they can be decoded by the receiver, the part of the signal strength distribution that falls below the receiver sensitivity threshold is not observable. We combine a Rician fading model with a bias function that captures the cut-off in the observed signal strength measurements. Two sets of experimental...... data are analysed. It is shown that the proposed method offers an approximation of the distribution of the signal strength measurements that is better than a naïve Rician fitting....

  11. Studying Hardness Meter Spring Strength to Understand Hardness Distribution on Body Surfaces.

    Arima, Yoshitaka

    2017-10-01

    For developing a hardness multipoint measurement system for understanding hardness distribution on biological body surfaces, we investigated the spring strength of the contact portion main axis of a biological tissue hardness meter (product name: PEK). We measured the hardness of three-layered sheets of six types of gel sheets (90 mm × 60 mm × 6 mm) constituting the acupuncture practice pads, with PEK measurements of 1.96 N, 2.94 N, 3.92 N, 4.90 N, 5.88 N, 6.86 N, 7.84 N, 8.82 N, and 9.81 N of the main axis spring strength. We obtained measurements 10 times for the gel sheets and simultaneously measured the load using a digital scale. We measured the hardness distribution of induration embedded and breast cancer palpation models, with a main axis with 1.96 N, 4.90 N, and 9.81 N spring strengths, to create a two-dimensional Contour Fill Chart. Using 4.90 N spring strength, we could obtain measurement loads of ≤3.0 N, and the mean hardness was 5.14 mm. This was close to the median of the total measurement range 0.0-10.0 mm, making the measurement range the largest for this spring strength. We could image the induration of the induration-embedded model regardless of the spring strength. Overall, 4.90 N spring strength was best suited for imaging cancer in the breast cancer palpation model. Copyright © 2017. Published by Elsevier B.V.

  12. Dynamic plantar pressure distribution, strength capacity and postural control after Lisfranc fracture-dislocation

    Mehlhorn, Alexander T; Walther, Markus; Yilmaz, Tayfun

    2017-01-01

    of life. 17 consecutive patients suffering from a Lisfranc fracture dislocation were registered, underwent open reduction and internal fixation and were followed-up for 50.5±25.7months (Mean±SDM). Biomechanical analysis of muscle strength capacities, postural control and plantar pressure distribution......Substantial progress has been made in the operative treatment of Lisfranc fractures, however, the prognosis remains poor. We hypothesized that Lisfranc injuries change the postural control and muscle strength of the lower limb. Both are suggested to correlate with the clinical outcome and quality...... correlated well with clinical outcome. Altered postural control was evident by a significant reduction in unilateral stance time, from which we calculated a strong correlation between stance time and the isokinetic strength measurement. Plantar pressure measurements revealed a significant reduction in peak...

  13. Excitation of giant resonances via charge exchange reactions

    Goodman, C.D.

    1979-01-01

    Charge-exchange reactions can be useful for identifying isovector resonances. At present the most promising use of charge-exchange reactions with respect to giant resonances is to locate and study Gamow-Teller (GT) resonances. Detailed comparisons between GT and M1 strengths can yield further structure information. 7 figures

  14. Charge exchange probes of nuclear structure and interactions with emphasis on (p,n)

    Goodman, C.D.

    1980-01-01

    New results from (p,n) studies at IUCF show that it is possible to observe Gamow-Teller (GT) strength and extract GT matrix elements from (p,n) measurements. The charge exchange reactions ( 6 Li, 6 He) and (π + ,π 0 ) involve different projectile quantum numbers, and the relationships of these reactions to (p,n) is discussed

  15. The sink strengths of voids and the expected swelling for both random and ordered void distributions

    Quigley, T.M.; Murphy, S.M.; Bullough, R.; Wood, M.H.

    1981-10-01

    The sink strength of a void has been obtained when the void is a member of a random or ordered distribution of voids. The former sink strength derivation has employed the embedding model and the latter the cellular model. In each case the spatially varying size-effect interaction between the intrinsic point defects and the voids has been included together with the presence of other sink types in addition to the voids. The results are compared with previously published sink strengths that have made use of an approximate representation for the size-effect interactions, and indicate the importance of using the exact form of the interaction. In particular the bias for interstitials compared with vacancies of small voids is now much reduced and contamination of the surfaces of such voids no longer appears essential to facilitate the nucleation and growth of the voids. These new sink strengths have been used, in conjunction with recently published dislocation sink strengths, to calculate the expected swelling of materials containing network dislocations and voids. Results are presented for both the random and the void lattice situations. (author)

  16. Beta strength distributions in neutron-deficient Kr and Sr isotopes using a total absorption spectrometer

    Maréchal, F

    2003-01-01

    Far from the line of stability, beta -decay studies are often a primary source of information on nuclear structure. The measured beta -strength distribution for a given decay can be used to verify the accuracy of our theoretical description of the parent nucleus ground state and the states populated in the daughter nucleus. Total absorption spectrometers based on large NaI crystals are well suited tools to determine the beta -strength distribution over the whole Q /sub EC/ decay window. The newly built spectrometer TAgS, dedicated to such studies, is presented and its performances and possibilities are discussed in the light of experiments performed at the ISOLDE /CERN mass separator. The resulting information on ground state deformations for the /sup 74/Kr and /sup 76/Sr isotopes are discussed. (22 refs).

  17. Gamow-Teller matrix elements from the C-12(d,He-2) and Mg-24(d,He-2) reactions at 170 MeV

    Baumer, C; Frekers, D; Schmidt, R; van den Berg, AM; Hannen, VM; Harakeh, MN; de Huu, MA; Wörtche, HJ; De Frenne, D; Hagemann, M; Heyse, J; Jacobs, E; Fujita, Y

    The Mg-24(d,He-2)Na-24 and the C-12(d,He-2)B-12 charge-exchange reactions have been studied at an incident energy of 170 MeV. The two protons in the S-1(0)(pp) state (indicated as He-2) were both momentum analyzed and detected by the same spectrometer and detector. Background-free He-2 spectra with

  18. Adhesively bonded joints composed of pultruded adherends: Considerations at the upper tail of the material strength statistical distribution

    Vallee, T.; Keller, Th. [Ecole Polytech Fed Lausanne, CCLab, CH-1015 Lausanne, (Switzerland); Fourestey, G. [Ecole Polytech Fed Lausanne, IACS, Chair Modeling and Sci Comp, CH-1015 Lausanne, (Switzerland); Fournier, B. [CEA SACLAY ENSMP, DEN, DANS, DMN, SRMA, LC2M, F-91191 Gif Sur Yvette, (France); Correia, J.R. [Univ Tecn Lisbon, Inst Super Tecn, Civil Engn and Architecture Dept, P-1049001 Lisbon, (Portugal)

    2009-07-01

    The Weibull distribution, used to describe the scaling of strength of materials, has been verified on a wide range of materials and geometries: however, the quality of the fitting tended to be less good towards the upper tail. Based on a previously developed probabilistic strength prediction method for adhesively bonded joints composed of pultruded glass fiber-reinforced polymer (GFRP) adherends, where it was verified that a two-parameter Weibull probabilistic distribution was not able to model accurately the upper tail of a material strength distribution, different improved probabilistic distributions were compared to enhance the quality of strength predictions. The following probabilistic distributions were examined: a two-parameter Weibull (as a reference), m-fold Weibull, a Grafted Distribution, a Birnbaum-Saunders Distribution and a Generalized Lambda Distribution. The Generalized Lambda Distribution turned out to be the best analytical approximation for the strength data, providing a good fit to the experimental data, and leading to more accurate joint strength predictions than the original two-parameter Weibull distribution. It was found that a proper modeling of the upper tail leads to a noticeable increase of the quality of the predictions. (authors)

  19. Adhesively bonded joints composed of pultruded adherends: Considerations at the upper tail of the material strength statistical distribution

    Vallee, T.; Keller, Th.; Fourestey, G.; Fournier, B.; Correia, J.R.

    2009-01-01

    The Weibull distribution, used to describe the scaling of strength of materials, has been verified on a wide range of materials and geometries: however, the quality of the fitting tended to be less good towards the upper tail. Based on a previously developed probabilistic strength prediction method for adhesively bonded joints composed of pultruded glass fiber-reinforced polymer (GFRP) adherends, where it was verified that a two-parameter Weibull probabilistic distribution was not able to model accurately the upper tail of a material strength distribution, different improved probabilistic distributions were compared to enhance the quality of strength predictions. The following probabilistic distributions were examined: a two-parameter Weibull (as a reference), m-fold Weibull, a Grafted Distribution, a Birnbaum-Saunders Distribution and a Generalized Lambda Distribution. The Generalized Lambda Distribution turned out to be the best analytical approximation for the strength data, providing a good fit to the experimental data, and leading to more accurate joint strength predictions than the original two-parameter Weibull distribution. It was found that a proper modeling of the upper tail leads to a noticeable increase of the quality of the predictions. (authors)

  20. Channel-facilitated molecular transport: The role of strength and spatial distribution of interactions

    Uppulury, Karthik, E-mail: karthik.uppulury@gmail.com [Department of Chemistry, Texas Tech University, Lubbock, TX 79409 (United States); Kolomeisky, Anatoly B. [Department of Chemistry, Department of Chemical and Biomolecular Engineering, Center for Theoretical Biological Physics, Rice University, Houston, TX 77005 (United States)

    2016-12-20

    Highlights: • Molecular flux strongly depends on the strength of the molecule-pore interactions. • There exists an optimal molecule-pore interaction potential for maximal flux. • Volume of interactions depends inversely on the strength for maximal flux. • Stronger interactions need more number of attractive sites for maximal flux. • Channels with few special sites need more attractive sites for higher flux. - Abstract: Molecular transport across channels and pores is critically important for multiple natural and industrial processes. Recent advances in single-molecule techniques have allowed researchers to probe translocation through nanopores with unprecedented spatial and temporal resolution. However, our understanding of the mechanisms of channel-facilitated molecular transport is still not complete. We present a theoretical approach that investigates the role of molecular interactions in the transport through channels. It is based on the discrete-state stochastic analysis that provides a fully analytical description of this complex process. It is found that a spatial distribution of the interactions strongly influences the translocation dynamics. We predict that there is the optimal distribution that leads to the maximal flux through the channel. It is also argued that the channel transport depends on the strength of the molecule-pore interactions, on the shape of interaction potentials and on the relative contributions of entrance and diffusion processes in the system. These observations are discussed using simple physical-chemical arguments.

  1. Channel-facilitated molecular transport: The role of strength and spatial distribution of interactions

    Uppulury, Karthik; Kolomeisky, Anatoly B.

    2016-01-01

    Highlights: • Molecular flux strongly depends on the strength of the molecule-pore interactions. • There exists an optimal molecule-pore interaction potential for maximal flux. • Volume of interactions depends inversely on the strength for maximal flux. • Stronger interactions need more number of attractive sites for maximal flux. • Channels with few special sites need more attractive sites for higher flux. - Abstract: Molecular transport across channels and pores is critically important for multiple natural and industrial processes. Recent advances in single-molecule techniques have allowed researchers to probe translocation through nanopores with unprecedented spatial and temporal resolution. However, our understanding of the mechanisms of channel-facilitated molecular transport is still not complete. We present a theoretical approach that investigates the role of molecular interactions in the transport through channels. It is based on the discrete-state stochastic analysis that provides a fully analytical description of this complex process. It is found that a spatial distribution of the interactions strongly influences the translocation dynamics. We predict that there is the optimal distribution that leads to the maximal flux through the channel. It is also argued that the channel transport depends on the strength of the molecule-pore interactions, on the shape of interaction potentials and on the relative contributions of entrance and diffusion processes in the system. These observations are discussed using simple physical-chemical arguments.

  2. Pore size distribution, strength, and microstructure of portland cement paste containing metal hydroxide waste

    Majid, Z.A.; Mahmud, H.; Shaaban, M.G.

    1996-12-31

    Stabilization/solidification of hazardous wastes is used to convert hazardous metal hydroxide waste sludge into a solid mass with better handling properties. This study investigated the pore size development of ordinary portland cement pastes containing metal hydroxide waste sludge and rice husk ash using mercury intrusion porosimetry. The effects of acre and the addition of rice husk ash on pore size development and strength were studied. It was found that the pore structures of mixes changed significantly with curing acre. The pore size shifted from 1,204 to 324 {angstrom} for 3-day old cement paste, and from 956 to 263 {angstrom} for a 7-day old sample. A reduction in pore size distribution for different curing ages was also observed in the other mixtures. From this limited study, no conclusion could be made as to any correlation between strength development and porosity. 10 refs., 6 figs., 3 tabs.

  3. Variable synaptic strengths controls the firing rate distribution in feedforward neural networks.

    Ly, Cheng; Marsat, Gary

    2018-02-01

    Heterogeneity of firing rate statistics is known to have severe consequences on neural coding. Recent experimental recordings in weakly electric fish indicate that the distribution-width of superficial pyramidal cell firing rates (trial- and time-averaged) in the electrosensory lateral line lobe (ELL) depends on the stimulus, and also that network inputs can mediate changes in the firing rate distribution across the population. We previously developed theoretical methods to understand how two attributes (synaptic and intrinsic heterogeneity) interact and alter the firing rate distribution in a population of integrate-and-fire neurons with random recurrent coupling. Inspired by our experimental data, we extend these theoretical results to a delayed feedforward spiking network that qualitatively capture the changes of firing rate heterogeneity observed in in-vivo recordings. We demonstrate how heterogeneous neural attributes alter firing rate heterogeneity, accounting for the effect with various sensory stimuli. The model predicts how the strength of the effective network connectivity is related to intrinsic heterogeneity in such delayed feedforward networks: the strength of the feedforward input is positively correlated with excitability (threshold value for spiking) when firing rate heterogeneity is low and is negatively correlated with excitability with high firing rate heterogeneity. We also show how our theory can be used to predict effective neural architecture. We demonstrate that neural attributes do not interact in a simple manner but rather in a complex stimulus-dependent fashion to control neural heterogeneity and discuss how it can ultimately shape population codes.

  4. Impact of fat mass distribution body shapes on muscles strength and the joints pain

    Zerf Mohammed

    2016-01-01

    Full Text Available Our study focuses on fat mass distribution body shapes type as measured to determine their effect on skeletal muscle strengthening lumbar extensors (upper and lower limbs where our background confirms that every girl has a natural body type of rectangle, apple, pear, or hourglass. It is good for her to know which type of body shape she is, so she can learn what exercises to do, whereas similar studies suggest that it is much better to challenge weight problems with exercise and dietary measures before resorting to figure shaping. For this purpose, our study was carried out with a total of thirty students, females listed in the Institute of Physical Education and Sport, University of Mostaganem, aged between 20 and 23 years; their homogeneity was based on age, sex, and academic specialty, classified based on the body mass index (BMI into two groups (normal and overweight and based on their body shape′s type into three groups (9 pear shape, 10 rectangle shape, and 11 hourglass shape as a protocol experimental to examine the impact of fat mass distribution body shapes type on lumbar extensor strength. Based on our data analysis, we confirm that the pear and the rectangle shape affect the strength lumbar extensors due to body weight distribution which increases the risks relating to the skeletal muscles. Weight gain is a factor contributing to the weakness of skeletal muscles. However, the body shape explains the anomalies of the distribution of fat mass and BMI risk observed in our sample in the lower and upper part of the body recorded by the values of Killy test and endurance of trunk, the case of the pear and the rectangle shape back pain, which are consisting in excess of the body fat distributed in comparison with less percentage of muscle mass. Whereas this difference can affect the pelvic position.

  5. International Conference on Spin Observables of Nuclear Probes

    Goodman, Charles; Walker, George; Spin Observables of Nuclear Probes

    1988-01-01

    The proceedings of the "International Conference on Spin Observables of Nuclear Probes" are presented in this volume. This conference was held in Telluride, Colorado, March 14 -17, 1988, and was the fourth in the Telluride series of nuclear physics conferences. A continuing theme in the Telluride conference series has been the complementarity of various intermediate-energy projectiles for elucidating the nucleon-nucleon interaction and nuclear structure. Earlier conferences have contributed significantly to an understanding of spin currents in nuclei, in particular the distribution of Gamow-Teller strength using charge-exchange reactions. The previous conference on "Antinucleon and Nucleon Nucleus Interactions" compared nuclear information from tra­ tional probes to recent results from antinucleon reactions. The 1988 conference on Spin Observables of Nuclear Probes, put special emphasis on spin observables and brought together experts using spin information to probe nuclear structure. Spin observabl...

  6. Search for the signature of a halo structure in the p(6He,6Li)n reaction

    Cortina-Gil, M.D.; Roussel-Chomaz, P.; Mittig, W.; Casandjian, J.M.; Chartier, M.; Alamanos, N.; Auger, F.; Fekou-Youmbi, V.; Blumenfeld, Y.; and others.

    1995-01-01

    The elastic scattering p( 6 He, 6 He)p and charge exchange reaction p( 6 He, 6 Li)n have been measured in reverse kinematics with a secondary 6 He beam. The angular distributions for these reactions were obtained. In the case of the charge exchange reaction, the ratio of the cross section for the Gamow-Teller transition to the ground state, and for the Fermi transition to the isobaric analog state is a measure of the relative strength of the two components of the exchange interaction. This ratio is found compatible with existing systematics for stable T=1 nuclei, and no clear signature of a halo structure was found in the present data. (author)

  7. Charge-exchange QRPA with the Gogny Force for Axially-symmetric Deformed Nuclei

    Martini, M., E-mail: martini.marco@gmail.com [Institut d' Astronomie et d' Astrophysique, Université Libre de Bruxelles, CP-226, 1050 Brussels (Belgium); CEA, DAM, DIF, F-91297 Arpajon (France); Goriely, S. [Institut d' Astronomie et d' Astrophysique, Université Libre de Bruxelles, CP-226, 1050 Brussels (Belgium); Péru, S. [CEA, DAM, DIF, F-91297 Arpajon (France)

    2014-06-15

    In recent years fully consistent quasiparticle random-phase approximation (QRPA) calculations using finite range Gogny force have been performed to study electromagnetic excitations of several axially-symmetric deformed nuclei up to the {sup 238}U. Here we present the extension of this approach to the charge-exchange nuclear excitations (pnQRPA). In particular we focus on the Isobaric Analog and Gamow-Teller resonances. A comparison of the predicted GT strength distribution with existing experimental data is presented. The role of nuclear deformation is shown. Special attention is paid to β-decay half-lives calculations for which experimental data exist and for specific isotone chains of relevance for the r-process nucleosynthesis.

  8. Uncertainties in modeling low-energy neutrino-induced reactions on iron-group nuclei

    Paar, N.; Vretenar, D.; Suzuki, T.; Honma, M.; Marketin, T.

    2011-01-01

    Charged-current neutrino-nucleus cross sections for 54,56 Fe and 58,60 Ni are calculated and compared using frameworks based on relativistic and Skyrme energy-density functionals and on the shell model. The current theoretical uncertainties in modeling neutrino-nucleus cross sections are assessed in relation to the predicted Gamow-Teller transition strength and available data, to multipole decomposition of the cross sections, and to cross sections averaged over the Michel flux and Fermi-Dirac distribution. By employing different microscopic approaches and models, the decay-at-rest (DAR) neutrino- 56 Fe cross section and its theoretical uncertainty are estimated to be th =(258±57)x10 -42 cm 2 , in very good agreement with the experimental value exp =(256±108±43)x10 -42 cm 2 .

  9. Distribution of spin dipole transition strength in the 15N(n,p)15C reaction

    Cellar, A.; Alford, W.P.; Helmer, R.; Abegg, R.; Frekers, D.; Haeusser, O.; Henderson, R.S.; Jackson, K.P.; Vetterli, M.; Yen, S.; Jeppesen, R.; Larson, B.; Mildenberger, J.; Pointon, B.W.; Trudel, A.

    1990-08-01

    The reaction 15 N(n,p) 15 C was studied at a neutron energy of 288 MeV using the TRIUMF (n,p) charge exchange facility and a high pressure gas target. The angular distributions for spin dipole (ΔL=1) transitions to the states in 15 C at energies 0 MeV and 0.740 MeV, as well as for higher excitation energies, were measured and the results were compared with DWIA calculations. The measured distribution of the spin dipole strength agrees well with shell model predictions, indicating that a rather simple model provides a satisfactory description of the 15 N ground state, and of positive parity states in 15 C up to about 18 MeV excitation. The magnitude of the peak cross sections (at ≅ 7 degrees) is described well by the calculations when the theoretical cross section is renormalized by a factor 0.7. The calculated cross sections near zero degrees are generally smaller than experimental data. It this is a general feature of ΔL=1 transitions, it suggests that estimates of GT strength based on a multipole decomposition of measured cross sections may be too high. (Author) (41 refs., 3 tabs., 14 figs.)

  10. Development of unfolding method to obtain pin-wise source strength distribution from PWR spent fuel assembly measurement

    Sitompul, Yos Panagaman; Shin, Hee-Sung; Park, Se-Hwan; Oh, Jong Myeong; Seo, Hee; Kim, Ho Dong

    2013-01-01

    An unfolding method has been developed to obtain a pin-wise source strength distribution of a 14 × 14 pressurized water reactor (PWR) spent fuel assembly. Sixteen measured gamma dose rates at 16 control rod guide tubes of an assembly are unfolded to 179 pin-wise source strengths of the assembly. The method calculates and optimizes five coefficients of the quadratic fitting function for X-Y source strength distribution, iteratively. The pin-wise source strengths are obtained at the sixth iteration, with a maximum difference between two sequential iterations of about 0.2%. The relative distribution of pin-wise source strength from the unfolding is checked using a comparison with the design code (Westinghouse APA code). The result shows that the relative distribution from the unfolding and design code is consistent within a 5% difference. The absolute value of the pin-wise source strength is also checked by reproducing the dose rates at the measurement points. The result shows that the pin-wise source strengths from the unfolding reproduce the dose rates within a 2% difference. (author)

  11. The {sup 152}Sm(p,n) reaction measurements in inverse kinematics

    Pohl, Moritz [Goethe Univ. Frankfurt am Main (Germany); Collaboration: S405-Collaboration

    2013-07-01

    Under stellar conditions, low-lying excited states in nuclei are in thermal equilibrium with the ground state. If those excited states undergo β-decays with a higher rate than the ground state, the β-decay half-life of this nucleus is dominated by the excited state. The corresponding life-times are extremely difficult to measure directly on earth, since the de-excitation occurs mostly via internal transition. For the understanding of the processes occurring during a star collapse, simulations are a crucial tool. To provide a detailed view on those processes and the underlying theoretical models, also to test and improve the simulation networks, information extracted from experiments is needed. Unfortunately, some reactions can not be reproduced directly in laboratories. This applies for example to electron capture processes, which can lead to excited states energetically forbidden on earth. Those reactions are dominated by the so called Gamow-Teller distribution B(GT). If the β-decay occurs via the Gamow-Teller transition, charge exchange reactions allow to investigate the decay strength. In order to verify the method of measuring the B(GT) strength of unstable heavy nuclei via inverse kinematics, the reaction p({sup 152}Sm,{sup 152}Eu)n was used as a test case. This measurement allows to set constraints on the temperature dependent electron capture of {sup 152}Eu, which is an important s-process branching point. The s405 experiment took place at the R{sup 3}B/LAND setup at GSI. A newly developed Low Energy Neutron detector Array (LENA) was used to measure the recoil neutrons, which are emitted at large angles relatively to the incoming beam. To determine the detector response, a GEANT3 simulation was performed. Preliminary results are presented.

  12. Double Differential Cross Sections and Generalized Oscillator Strength Distributions of Ammonia

    Yamamoto, Karin; Nogami, Keisuke; Hino, Yuta; Sakai, Yasuhiro

    2011-01-01

    The absolute double differential cross section (DDCS), the generalized oscillator strength distribution (GOSD), and the ionization efficiency of ammonia (NH 3 ) were investigated from the threshold to 40 eV under the condition of 200 and 400 eV incident electron energies and 6 and 8 degree scattering angles using electron energy-loss spectroscopy and electron- ion coincidence techniques. To determine the absolute values, we used a mixture of helium (He) and NH 3 and normalized the measured relative DDCS spectrum by the differential cross section for 2 1 P excitation of He. Our results are in close agreement with previous dipole (e, e) spectroscopy, although the incident electron energy is lower. The ionization efficiency curve obtained from coincidence measurements indicated the existence of doubly excited states that cause neutral dissociation.

  13. Equivalent formation strength as a proxy tool for exploring the existence and distribution of gas hydrates

    Hamada, Y.; Yamada, Y.; Sanada, Y.; Nakamura, Y.; Kido, Y. N.; Moe, K.

    2017-12-01

    Gas hydrates bearing layer can be normally identified by a basement simulating reflector (BSR) or well logging because of their high acoustic- and electric impedance compared to the surrounding formation. These characteristics of the gas hydrate can also represent contrast of in-situ formation strength. We here attempt to describe gas hydrate bearing layers based on the equivalent strength (EST). The Indian National Gas Hydrate Program (NGHP) Expedition 02 was executed 2015 off the eastern margin of the Indian Peninsula to investigate distribution and occurrence of gas hydrates. From 25 drill sites, downhole logging data, cored samples, and drilling performance data were collected. Recorded drilling performance data was converted to the EST, which is a developed mechanical strength calculated only by drilling parameters (top drive torque, rotation per minute , rate of penetration , and drill bit diameter). At a representative site, site 23, the EST shows constant trend of 5 to 10 MPa, with some positive peaks at 0 - 270 mbsf interval, and sudden increase up to 50 MPa above BSR depth (270 - 290 mbsf). Below the BSR, the EST stays at 5-10 MPa down to the bottom of the hole (378 mbsf). Comparison of the EST with logging data and core sample description suggests that the depth profiles of the EST reflect formation lithology and gas hydrate content: the EST increase in the sand-rich layer and the gas hydrate bearing zone. Especially in the gas hydrate zone, the EST curve indicates approximately the same trend with that of P-wave velocity and resistivity measured by downhole logging. Cross plot of the increment of the EST and resistivity revealed the relation between them is roughly logarithmic, indicating the increase and decrease of the EST strongly depend on the saturation factor of gas hydrate. These results suggest that the EST, proxy of in-situ formation strength, can be an indicator of existence and amount of the gas-hydrate layer. Although the EST was calculated

  14. Impact of Blending on Strength Distribution of Ambient Cured Metakaolin and Palm Oil Fuel Ash Based Geopolymer Mortar

    Taliat Ola Yusuf

    2014-01-01

    Full Text Available This paper investigates the influence of blending of metakaolin with silica rich palm oil fuel ash (POFA on the strength distribution of geopolymer mortar. The broadness of strength distribution of quasi-brittle to brittle materials depends strongly on the existence of flaws such as voids, microcracks, and impurities in the material. Blending of materials containing alumina and silica with the objective of improving the performance of geopolymer makes comprehensive characterization necessary. The Weibull distribution is used to study the strength distribution and the reliability of geopolymer mortar specimens prepared from 100% metakaolin, 50% and 70% palm and cured under ambient condition. Mortar prisms and cubes were used to test the materials in flexure and compression, respectively, at 28 days and the results were analyzed using Weibull distribution. In flexure, Weibull modulus increased with POFA replacement, indicating reduced broadness of strength distribution from an increased homogeneity of the material. Modulus, however, decreased with increase in replacement of POFA in the specimens tested under compression. It is concluded that Weibull distribution is suitable for analyses of the blended geopolymer system. While porous microstructure is mainly responsible for flexural failure, heterogeneity of reaction relics is responsible for the compression failure.

  15. Does modifying the particle size distribution of a granular material (i.e., material scalping alters its shear strength?

    Azéma Emilien

    2017-01-01

    Full Text Available By means of two dimensional contact dynamics simulations, we analyzed the effect of the particle size distribution (PSD on the shear strength of granular materials composed of un-breakable disks. We modelled PSDs with a normalized beta function, which allows for building S-shaped gradation curves, such as those that typically occur in soils. We systematically controlled and varied the size span and the shape of the PSD, and found that the shear strength is independent both characteristics. This implies that PSD modification procedures such as material scalping (i.e., removing the smallest and/or largest particles in the sample should not affect significantly the shear strength of the material composed of unbreakable discs. In order to explore the origins of the invariance of the shear strength with PSD, we analyzed the connectivity, force transmission, and friction mobilization in terms of anisotropies, finding that the constant shear strength is due to a subtle compensation of anisotropies.

  16. Degradation of the compressive strength of unstiffened/stiffened steel plates due to both-sides randomly distributed corrosion wastage

    Zorareh Hadj Mohammad

    Full Text Available The paper addresses the problem of the influence of randomly distributed corrosion wastage on the collapse strength and behaviour of unstiffened/stiffened steel plates in longitudinal compression. A series of elastic-plastic large deflection finite element analyses is performed on both-sides randomly corroded steel plates and stiffened plates. The effects of general corrosion are introduced into the finite element models using a novel random thickness surface model. Buckling strength, post-buckling behaviour, ultimate strength and post-ultimate behaviour of the models are investigated as results of both-sides random corrosion.

  17. Statistical flaw strength distributions for glass fibres: Correlation between bundle test and AFM-derived flaw size density functions

    Foray, G.; Descamps-Mandine, A.; R’Mili, M.; Lamon, J.

    2012-01-01

    The present paper investigates glass fibre flaw size distributions. Two commercial fibre grades (HP and HD) mainly used in cement-based composite reinforcement were studied. Glass fibre fractography is a difficult and time consuming exercise, and thus is seldom carried out. An approach based on tensile tests on multifilament bundles and examination of the fibre surface by atomic force microscopy (AFM) was used. Bundles of more than 500 single filaments each were tested. Thus a statistically significant database of failure data was built up for the HP and HD glass fibres. Gaussian flaw distributions were derived from the filament tensile strength data or extracted from the AFM images. The two distributions were compared. Defect sizes computed from raw AFM images agreed reasonably well with those derived from tensile strength data. Finally, the pertinence of a Gaussian distribution was discussed. The alternative Pareto distribution provided a fair approximation when dealing with AFM flaw size.

  18. Complete dipole strength distributions in 208Pb from high-resolution polarized proton scattering at 0°

    Von Neumann-Cosel, Peter

    2012-01-01

    Small-angle polarized proton scattering including 0° at incident energies of a few 100 MeV/nucleon is established as a new spectrospcopic tool for the study of E1 and M1 strength distributions. Experiments of this type have been realized recently at RCNP, Osaka, Japan with high energy resolution of the order 25 - 30 keV (FWHM). Using 208 Pb as an example, the physics potential of such data is discussed. It includes information on the properties of the Pygmy Dipole Resonance but also on complete E1 and M1 strength distributions and thus the gamma strength function. The E1 polarizability can be extracted with a precision of about 4% providing important experimental constraints on the neutron skin thickness in 208 Pb.

  19. Prediction of Strength for Inhomogeneous : Defective Glass Elements Based on the Sequential Partitioning of the Data and Weibull Statistical Distribution

    Shabetia, Alexander; Rodichev, Yurii; Veer, F.A.; Soroka, Elena; Louter, Christian; Bos, Freek; Belis, Jan; Veer, Fred; Nijsse, Rob

    An analytical approach based on the on the sequential partitioning of the data and Weibull Statistical Distribution for inhomogeneous - defective materials is proposed. It allows assessing the guaranteed strength of glass structures for the low probability of fracture with a higher degree of

  20. Ceramic microsieves: influence of perforation shape and distribution on flow resistance and membrane strength

    Kuiper, S.; Brink, R.; Nijdam, W.; Krijnen, Gijsbertus J.M.; Elwenspoek, Michael Curt

    2002-01-01

    Ceramic microsieves with slit-shaped perforations were compared to sieves with circular-shaped perforations, regarding flow resistance and membrane strength. Destructive tests show that the highest strength is obtained if the perforations are placed in a non-alternating pattern. Especially for

  1. Electromagnetic dipole strength distribution in $^{124,128,132,134}$Xe below the neutron separation energy

    Massarczyk, R; Dönau, F; Frauendorf, S; Bemmerer, D; Beyer, R; Butterling, M; Hannaske, R; Junghans, A; Koegler, T; Rusev, G; Schilling, K D; Schramm, G; Tonchev, A P; Tornow, W; Wagner, A

    2014-01-01

    Dipole strength functions in the chain of xenon isotopes are analyzed on the basis of photon-scatterde experiments with bremsstrahlung at the ELBE facility in Dresden, Germany, and at the HI S facility in Durham, North Carolina, USA. The evolution of dipole strength with neutron excess and nuclear deformation is studied.

  2. Effective oscillator strength distributions of spherically symmetric atoms for calculating polarizabilities and long-range atom–atom interactions

    Jiang, Jun, E-mail: phyjiang@yeah.net [Key Laboratory of Atomic and Molecular Physics and Functional Materials of Gansu Province, College of Physics and Electronic Engineering, Northwest Normal University, Lanzhou 730070 (China); School of Engineering, Charles Darwin University, Darwin, Northern Territory, 0909 (Australia); Mitroy, J. [School of Engineering, Charles Darwin University, Darwin, Northern Territory, 0909 (Australia); Cheng, Yongjun, E-mail: cyj83mail@gmail.com [School of Engineering, Charles Darwin University, Darwin, Northern Territory, 0909 (Australia); Academy of Fundamental and Interdisciplinary Science, Harbin Institute of Technology, Harbin 150080 (China); Bromley, M.W.J., E-mail: brom@physics.uq.edu.au [School of Mathematics and Physics, The University of Queensland, Brisbane, Queensland 4075 (Australia)

    2015-01-15

    Effective oscillator strength distributions are systematically generated and tabulated for the alkali atoms, the alkaline-earth atoms, the alkaline-earth ions, the rare gases and some miscellaneous atoms. These effective distributions are used to compute the dipole, quadrupole and octupole static polarizabilities, and are then applied to the calculation of the dynamic polarizabilities at imaginary frequencies. These polarizabilities can be used to determine the long-range C{sub 6}, C{sub 8} and C{sub 10} atom–atom interactions for the dimers formed from any of these atoms and ions, and we present tables covering all of these combinations.

  3. Effective oscillator strength distributions of spherically symmetric atoms for calculating polarizabilities and long-range atom–atom interactions

    Jiang, Jun; Mitroy, J.; Cheng, Yongjun; Bromley, M.W.J.

    2015-01-01

    Effective oscillator strength distributions are systematically generated and tabulated for the alkali atoms, the alkaline-earth atoms, the alkaline-earth ions, the rare gases and some miscellaneous atoms. These effective distributions are used to compute the dipole, quadrupole and octupole static polarizabilities, and are then applied to the calculation of the dynamic polarizabilities at imaginary frequencies. These polarizabilities can be used to determine the long-range C 6 , C 8 and C 10 atom–atom interactions for the dimers formed from any of these atoms and ions, and we present tables covering all of these combinations

  4. Span-Dependent Distributions of the Bending Strength of Spruce Timber

    Ditlevsen, Ove; Källsner, Bo

    2005-01-01

    Tests data of bending strengths of a large number of timber beams of different spans obtained at the Swedish Institute for Wood Technology Research reveal a statistical structure that can be represented in a simple probabilistic model of series system type. A particular feature of the data from one...

  5. The effect of oxide particles on the strength and ductility of bulk iron with a bimodal grain size distribution

    Casas, C.; Tejedor, R. [Department of Materials Science and Metallurgical Engineering, ETSEIB, Universitat Politècnica de Catalunya, Av. Diagonal 647, 08028 Barcelona (Spain); Rodríguez-baracaldo, R. [Department of Mechanical Engineering, Universidad Nacional de Colombia, Bogotá. Colombia (Colombia); Benito, J.A., E-mail: Josep.a.benito@upc.edu [Department of Materials Science and Metallurgical Engineering, EUETIB, Universitat Politècnica de Catalunya, Comte d' Urgell 187, 08036 Barcelona (Spain); Fundació CTM Centre Tecnològic de Manresa, Plaça de la Ciencia, 2, 08243 Manresa (Spain); Cabrera, J.M. [Department of Materials Science and Metallurgical Engineering, ETSEIB, Universitat Politècnica de Catalunya, Av. Diagonal 647, 08028 Barcelona (Spain); Fundació CTM Centre Tecnològic de Manresa, Plaça de la Ciencia, 2, 08243 Manresa (Spain)

    2015-03-11

    The strength and ductility of bulk nanostructured and ultrafine-grained iron containing 0.39% oxygen by weight was determined by tensile tests. Samples were obtained by consolidation of milled iron powder at 500 °C. Heat treatments were designed to cover a wide range of grain sizes spanning from 100 to 2000 nm with different percentages of coarse and nanostructured grain areas, which was defined as a bimodal grain size distribution. Transmission electron microscopy was used to determine the diameter, volume fraction and location of oxides in the microstructure. The strength was analysed following two approaches. The first one was based on the strong effect of oxides and involved the use of a mixed particle-grain boundary strengthening model, and the second one was based on simple grain boundary strengthening. The mixed model underestimated the strength of nanostructured samples, whereas the simple grain boundary model worked better. However, for specimens with a bimodal grain size, the fitting of the mixed model was better. In this case, the more effective particle strengthening was related to the dispersion of oxides inside the large ferrite grains. In addition, the bimodal samples showed an acceptable combination of strength and ductility. Again, the ferrite grains containing oxides promoted strain hardening due to the increase in dislocation activity.

  6. Quark-spin isospin sum rules and the Adler-Weisberger relation in nuclei

    Delorme, J.; Ericson, M.

    1982-01-01

    We use a quark model to extend the classical Gamow-Teller sum rule for the difference of the β - and β + strengths to excitations of the nucleon (mainly the Δ isobar). A schematic model illustrates the realization of the new sum rule when a particle-hole force is introduced. We discuss the connection of our result with the model-independent Adler-Weisberger sum rule. (orig.)

  7. Permeability and pore size distribution in medium strength self-compacting concrete

    Fernández Cánovas, M.

    2010-09-01

    Full Text Available The use of self-compacting concrete (SCC has been on the rise in recent years. Research on this type of concrete has focused primarily on determining optimal dosage, while durability, particularly for medium strength SCC, has received much less attention. The present study explored the permeability of a number of medium strength (characteristic strength, 30 MPa self-compacting concretes, including SCCs made with common cement, in pursuit of a balance between performance and cost. Pressurised water and mercury intrusion porosimetry tests were conducted to determine concrete behaviour when exposed to aggressive agents. The findings showed that the capillary networks of these concretes are essentially impermeable to aggressive agents.

    El hormigón autocompactante ha experimentado un amplio desarrollo en los últimos años. Los estudios sobre este hormigón se han centrado en obtener dosificaciones óptimas, mientras los relativos a su durabilidad son escasos, especialmente en el caso de hormigones de resistencia moderada. Este trabajo se centra en el estudio de la permeabilidad de distintos hormigones autocompactantes de resistencia moderada (resistencia característica 30 MPa. El estudio incluye hormigones fabricados con cementos comunes, en los que se ha buscado un equilibrio entre prestaciones y precio. Con el fin de estudiar su comportamiento frente a la penetración de agentes agresivos, se han realizado los ensayos de permeabilidad al agua bajo presión y estudio de la porosimetría por intrusión de mercurio. Los resultados de los ensayos ponen de manifiesto el buen comportamiento de estos hormigones frente a la posible penetración de agentes agresivos por la red capilar.

  8. Oscillator-strength distributions for oxygen, carbon dioxide, water, methyl chloride, and carbon tetrachloride

    Person, J.C.; Nicole, P.P.

    1979-01-01

    New measurements of photoabsorption give oscillator-strength values for the following gases and energy regions: O 2 , 7.34 to 11.79 eV; CO 2 , 7.34 to 11.77 eV; H 2 O, 6.62 to 11.80 eV; CH 3 CL, 6.14 to 11.25 eV; and CCl 4 , 6.14 to 11.49 eV. Comparisons are made with some values from the literature

  9. Microstructure and Hardness Distribution of Resistance Welded Advanced High Strength Steels

    Pedersen, Kim Richardt; Harthøj, Anders; Friis, Kasper Leth

    2008-01-01

    In this work a low carbon steel and two high strength steels (DP600 and TRIP700) have been resistance lap welded and the hardness profiles were measured by micro hardness indentation of cross sections of the joint. The resulting microstructure of the weld zone of the DP-DP and TRIP-TRIP joints were...... found to consist of a martensitic structure with a significant increase in hardness. Joints of dissimilar materials mixed completely in the melted region forming a new alloy with a hardness profile lying in between the hardness measured in joints of the similar materials. Furthermore the joints were...

  10. Distribution of radiative strength with excitation energy: the E1 and M1 giant resonances

    Brown, G.E.; Speth, J.

    1979-01-01

    Calculations of the giant dipole resonance in the particle-hole model, employing empirical values for the unperturbed particle and hole energies, have been unsuccessful in pushing the dipole state to a sufficiently high energy. it is argued that unperturbed levels correspondign to an effective mass of m*/m approx. 0.6 to 0.7 should be employed. The couplings of particles and holes to vibrations are the crucial ingredients in these considerations. More generally, it is argued that the effective mass relevant to excitations near the Fermi surface is that corresponding to empirical single-particle levels, m*/m greater than or equal to 1.0. For particle-hole excitations above the Fermi surface, it is a decreasing function of excitation energy, reaching the above values 0.6 to 0.7 for E greater than or equal to 2 dirac constant/b omega, dirac constant/sub omega/ being the shell spacing. This has the consequence of spreading out the M1 strength. A new interpretation of experimental strengths is proposed

  11. The (n,p) reaction as a probe of nuclear structure

    Jackson, K.P.; Celler, A.

    1988-08-01

    An account is given of some results of studies of the (n,p) reaction on nuclear targets at TRIUMF. The (n,p) reaction, inducing spin flip transitions in isospin space, appears to exhibit a unique sensitivity to certain aspects of nuclear structure. The TRIUMF facility is the first to exploit the (n,p) reaction as a detailed probe of nuclear structure at energies above 65 MeV. In the (n,p) reaction Fermi transitions are absent, but there is a dramatic impact on Gamow-Teller and other collective transactions. Some nuclear transition matrix elements can be estimated on the basis of (n,p) measurements. Experiments have been carried out at TRIUMF on Li 6 , Fe 5 4, and Zr 9 0 targets. The calibration of the (n,p) reaction as a probe of the Gamow-Teller strength B + GT has been achieved for three targets. (L.L.) (45 refs., 10 figs.)

  12. Beta-decay studies near 100Sn

    Rykaczewski, Krzysztof Piotr; Karny, M.; Batist, L.; Banu, A.; Becker, F.; Blazhev, A.; Burkard, K.; Bruchle, W.; Doring, J.; Faestermann, T.; Gorska, M.; Grawe, H.; Janas, Z.; Jungclaus, A.; Kavatsyuk, M.; Kavatsyuk, O.; Kirchner, R.; La Commara, M.; Mandal, S.; Mazzocchi, C.; Miernik, K.; Mukha, I.; Muralithar, S.; Plettner, C.; Plochocki, A.; Roeckl, E.; Romoli, M.; Schadel, M.; Schmidt, K.; Schwengner, R.; Zylicz, J.

    2005-01-01

    The β-decay of 102 Sn was studied by using high-resolution germanium detectors as well as a Total Absorption Spectrometer (TAS). A decay scheme has been constructed based on the γ-γ coincidence data. The total experimental Gamow-Teller strength B GT exp of 102 Sn was deduced from the TAS data to be 4.2(9). A search for β-delayed γ-rays of 100 Sn decay remained unsuccessful. However, a Gamow-Teller hindrance factor h = 2.2(3), and a cross-section of about 3nb for the production of 100 Sn in fusion-evaporation reaction between 58 Ni beam and 50 Cr target have been estimated from the data on heavier tin isotopes. The estimated hindrance factor is similar to the values derived for lower shell nuclei

  13. Visible bands of ammonia: band strengths, curves of growth, and the spatial distribution of ammonia on Jupiter

    Lutz, B.L.; Owen, T.

    1980-01-01

    We report room-temperature laboratory studies of the 5520 A (6ν 1 ) and 6475 A (5ν 1 ) bands of self-broadened ammonia at column densities ranging from 1.7--435.7 meter-amagats (m-am). Detailed equivalent-width measurements at 24 different pressure-pathlength combinations corresponding to four pressures between 44 and 689 torr and pathlengths between 32 and 512 m are used to determin curves of growth and integrated band strengths. The band strengths for the 6ν 1 and 5ν 1 overtones are 5520 A: S=0.096 +- 0.005 cm -1 (m-am) -1 and 6475 A: S=0.63 +- 0.03 cm -1 (m-am) -1 , respectively.Using these band strengths and curves of growth, we analyze new spatially resolved spectra of Jupiter showing a nonhomogeneous distribution of ammonia in the Jovian atmosphere. The observed variations in the CH 4 /NH 3 mixing ratio are interpreted as evidence of altitude-dependent depletion of ammonia in the atmosphere

  14. Study of the strength distribution of primary γ-transitions in the decay from superdeformed states in 194Hg

    Lopez-Martens, A.P.; Doessing, T.; Khoo, T.L.; Korichi, A.; Hannachi, F.; Calderin, I.J.; Lauritsen, T.; Ahmad, I.; Carpenter, M.P.; Fischer, S.M.; Hackman, G.; Janssens, R.V.F.; Nisius, D.; Reiter, P.; Amro, H.; Moore, E.F.

    1999-01-01

    The strength distribution of the primary γ rays in the decay from superdeformed (SD) states is investigated by applying the maximum likelihood method. For the 194 Hg nucleus, 41 primary transitions are identified above 2600 keV. It is concluded that they represent the strongest 10% of the transitions selected stochastically from a Porter-Thomas distribution. This would support the scenario of a statistical decay of SD states via coupling to a compound state at normal deformation. However, the occurrence of several very strong 'one-step linking' transitions is found to have a very small probability. Based on the absence of strong primary transitions from SD states in adjacent nuclei, the situation in 194 Hg is viewed as a very lucky incidence

  15. Distributed, signal strength-based indoor localization algorithm for use in healthcare environments.

    Wyffels, Jeroen; De Brabanter, Jos; Crombez, Pieter; Verhoeve, Piet; Nauwelaers, Bart; De Strycker, Lieven

    2014-11-01

    In current healthcare environments, a trend toward mobile and personalized interactions between people and nurse call systems is strongly noticeable. Therefore, it should be possible to locate patients at all times and in all places throughout the care facility. This paper aims at describing a method by which a mobile node can locate itself indoors, based on signal strength measurements and a minimal amount of yes/no decisions. The algorithm has been developed specifically for use in a healthcare environment. With extensive testing and statistical support, we prove that our algorithm can be used in a healthcare setting with an envisioned level of localization accuracy up to room revel (or region level in a corridor), while avoiding heavy investments since the hardware of an existing nurse call network can be reused. The approach opted for leads to very high scalability, since thousands of mobile nodes can locate themselves. Network timing issues and localization update delays are avoided, which ensures that a patient can receive the needed care in a time and resources efficient way.

  16. Embedded NMR Sensor to Monitor Compressive Strength Development and Pore Size Distribution in Hydrating Concrete

    Díaz-Díaz, Floriberto; de J. Cano-Barrita, Prisciliano F.; Balcom, Bruce J.; Solís-Nájera, Sergio E.; Rodríguez, Alfredo O.

    2013-01-01

    In cement-based materials porosity plays an important role in determining their mechanical and transport properties. This paper describes an improved low–cost embeddable miniature NMR sensor capable of non-destructively measuring evaporable water loss and porosity refinement in low and high water-to-cement ratio cement-based materials. The sensor consists of two NdFeB magnets having their North and South poles facing each other, separated by 7 mm to allow space for a Faraday cage containing a Teflon tube and an ellipsoidal RF coil. To account for magnetic field changes due to temperature variations, and/or the presence of steel rebars, or frequency variation due to sample impedance, an external tuning circuit was employed. The sensor performance was evaluated by analyzing the transverse magnetization decay obtained with a CPMG measurement from different materials, such as a polymer phantom, fresh white and grey cement pastes with different w/c ratios and concrete with low (0.30) and high (0.6) w/c ratios. The results indicated that the sensor is capable of detecting changes in water content in fresh cement pastes and porosity refinement caused by cement hydration in hardened materials, even if they are prepared with a low w/c ratio (w/c = 0.30). The short lifetime component of the transverse relaxation rate is directly proportional to the compressive strength of concrete determined by destructive testing. The r2 (0.97) from the linear relationship observed is similar to that obtained using T2 data from a commercial Oxford Instruments 12.9 MHz spectrometer.

  17. Embedded NMR Sensor to Monitor Compressive Strength Development and Pore Size Distribution in Hydrating Concrete

    Floriberto Díaz-Díaz

    2013-11-01

    Full Text Available In cement-based materials porosity plays an important role in determining their mechanical and transport properties. This paper describes an improved low–cost embeddable miniature NMR sensor capable of non-destructively measuring evaporable water loss and porosity refinement in low and high water-to-cement ratio cement-based materials. The sensor consists of two NdFeB magnets having their North and South poles facing each other, separated by 7 mm to allow space for a Faraday cage containing a Teflon tube and an ellipsoidal RF coil. To account for magnetic field changes due to temperature variations, and/or the presence of steel rebars, or frequency variation due to sample impedance, an external tuning circuit was employed. The sensor performance was evaluated by analyzing the transverse magnetization decay obtained with a CPMG measurement from different materials, such as a polymer phantom, fresh white and grey cement pastes with different w/c ratios and concrete with low (0.30 and high (0.6 w/c ratios. The results indicated that the sensor is capable of detecting changes in water content in fresh cement pastes and porosity refinement caused by cement hydration in hardened materials, even if they are prepared with a low w/c ratio (w/c = 0.30. The short lifetime component of the transverse relaxation rate is directly proportional to the compressive strength of concrete determined by destructive testing. The r2 (0.97 from the linear relationship observed is similar to that obtained using T2 data from a commercial Oxford Instruments 12.9 MHz spectrometer.

  18. MEASURING NEBULAR TEMPERATURES: THE EFFECT OF NEW COLLISION STRENGTHS WITH EQUILIBRIUM AND {kappa}-DISTRIBUTED ELECTRON ENERGIES

    Nicholls, David C.; Dopita, Michael A.; Sutherland, Ralph S.; Kewley, Lisa J. [Research School of Astronomy and Astrophysics, Australian National University, Cotter Rd., Weston ACT 2611 (Australia); Palay, Ethan, E-mail: david@mso.anu.edu.au [Department of Astronomy, Ohio State University, Columbus, OH 43210 (United States)

    2013-08-15

    In this paper we develop tools for observers to use when analyzing nebular spectra for temperatures and metallicities, with two goals: to present a new, simple method to calculate equilibrium electron temperatures for collisionally excited line flux ratios, using the latest atomic data; and to adapt current methods to include the effects of possible non-equilibrium ''{kappa}'' electron energy distributions. Adopting recent collision strength data for [O III], [S III], [O II], [S II], and [N II], we find that existing methods based on older atomic data seriously overestimate the electron temperatures, even when considering purely Maxwellian statistics. If {kappa} distributions exist in H II regions and planetary nebulae as they do in solar system plasmas, it is important to investigate the observational consequences. This paper continues our previous work on the {kappa} distribution. We present simple formulaic methods that allow observers to (1) measure equilibrium electron temperatures and atomic abundances using the latest atomic data, and (2) to apply simple corrections to existing equilibrium analysis techniques to allow for possible non-equilibrium effects. These tools should lead to better consistency in temperature and abundance measurements, and a clearer understanding of the physics of H II regions and planetary nebulae.

  19. Distribution of radiation lifetime and oscillator strengths in atomic and ion spectra

    Shabanova, L.N.; Gruzdev, P.F.; Verolajnen, Ya.F. (Leningradskij Gosudarstvennyj Univ. (USSR). Nauchno-Issledovatel' skij Fizicheskij Inst.)

    1984-04-01

    Analysis of present experimental and theoretical data on determination of radiation life time and forces of oscillators for disclosing general regularities inherent in radiation constants inside the atom, homologous atoms inside subgroups of atoms and ions of isoelectronic subsequences is conducted. Another purpose is to chose most reliable values of constants and to obtain extrapolation formulae for their determination on the base of the corresponding statistical processing data and revealed regularities. A hydrogen atom, isoelectronic series NaI-Ni18, isoelectronic series Ne, He, ZnI, CdI are considered. Systematics of radiation life time depending on the basic quantum number is presented. The force of oscillators f is considered on the example of an atomic system with one valent electron outside the locked shell - Li, Na, K, Rb, Cs. Distribution of force density of the oscillator df/dE is considered, here continuous spectrum near the threshold of ionization is regarded simultaneously with discrete spectrum. An interpolation formula for the number f for high members of atom series (n>=10) of alkaline metals is presented. Values of coefficients included in this formula are tabulated.

  20. Dipole strength distribution below the giant dipole resonance in {sup 92}Mo, {sup 98}Mo and {sup 100}Mo

    Rusev, G.Y.

    2006-07-01

    Investigations of the dipole-strength distributions in {sup 92}Mo, {sup 98}Mo and {sup 100}Mo were carried out by means of the method of nuclear resonance fluorescence. The low-lying excitations in the nuclides {sup 92}Mo, {sup 98}Mo and {sup 100}Mo have been studied in photon-scattering experiments at an electron energy of 6 MeV at the ELBE accelerator and at electron energies from 3.2 to 3.8 MeV at the Dynamitron accelerator. Five levels were observed in {sup 92}Mo. Five levels in {sup 98}Mo and 14 in {sup 100}Mo were identified for the first time in the energy range from 2 to 4 MeV. Dipole-strength distributions up to the neutron-separation energies in the nuclides {sup 92}Mo, {sup 98}Mo and {sup 100}Mo have been investigated at the ELBE accelerator. Because of the possible observation of transitions in the neighboring nuclei produced via ({gamma},n) reaction, additional measurements at electron energies of 8.4 and 7.8 MeV, below the neutron-separation energy, were performed on {sup 98}Mo and {sup 100}Mo, respectively. The number of transitions assigned to {sup 92}Mo, {sup 98}Mo and {sup 100}Mo is 340, 485 and 499, respectively, the main part of them being dipole transitions. Statistical properties of the observed transitions are obtained. The continuum contains the ground-state transitions as well as the branching transitions to the low-lying levels and the subsequent deexcitations of these levels. (orig.)

  1. Beta-delayed fission and neutron emission calculations for the actinide cosmochronometers

    Meyer, B.S.; Howard, W.M.; Mathews, G.J.; Takahashi, K.; Moeller, P.; Leander, G.A.

    1989-01-01

    The Gamow-Teller beta-strength distributions for 19 neutron-rich nuclei, including ten of interest for the production of the actinide cosmochronometers, are computed microscopically with a code that treats nuclear deformation explicitly. The strength distributions are then used to calculate the beta-delayed fission, neutron emission, and gamma deexcitation probabilities for these nuclei. Fission is treated both in the complete damping and WKB approximations for penetrabilities through the nuclear potential-energy surface. The resulting fission probabilities differ by factors of 2 to 3 or more from the results of previous calculations using microscopically computed beta-strength distributions around the region of greatest interest for production of the cosmochronometers. The indications are that a consistent treatment of nuclear deformation, fission barriers, and beta-strength functions is important in the calculation of delayed fission probabilities and the production of the actinide cosmochronometers. Since we show that the results are very sensitive to relatively small changes in model assumptions, large chronometric ages for the Galaxy based upon high beta-delayed fission probabilities derived from an inconsistent set of nuclear data calculations must be considered quite uncertain

  2. Spin dipole and quadrupole resonances in 40Ca

    Baker, F.T.; Love, W.G.; Bimbot, L.; Fergerson, R.W.; Glashausser, C.; Green, A.; Jones, K.; Nanda, S.

    1989-01-01

    Angular distributions of the double differential cross section d 2 σ/dΩ dE(σ) and the spin-flip probability S nn have been measured for inclusive proton inelastic scattering from 40 Ca at 319 MeV. Excitation energies (ω) up to about 40 MeV have been investigated over the angular range from 3.5 degree to 12 degree in the laboratory (0.3 to 0.9 fm -1 ). Here, multipole decompositions of angular distributions of σS nn for the 40 Ca(rvec p,rvec p ') reaction at 319 MeV have been performed in order to compare ΔS=1 strength observed with sum rules. In contrast to the well-known quenching of Gamow-Teller and M1 resonances, the spin-dipole resonance has a total measured strength which is larger than that predicted by the energy-weighted sum rule. The spin-dipole strength distribution supports asymmetric widths predicted by calculations including 2p-2h mixing. The spin-quadrupole resonance is observed near ω=35 MeV and its total strength for ω<40 MeV estimated

  3. Radial distributions of magnetic field strength in the solar corona as derived from data on fast halo CMEs

    Fainshtein, Victor; Egorov, Yaroslav

    2018-03-01

    In recent years, information about the distance between the body of rapid coronal mass ejection (CME) and the associated shock wave has been used to measure the magnetic field in the solar corona. In all cases, this technique allows us to find coronal magnetic field radial profiles B(R) applied to the directions almost perpendicular to the line of sight. We have determined radial distributions of magnetic field strength along the directions close to the Sun-Earth axis. For this purpose, using the "ice-cream cone" model and SOHO/LASCO data, we found 3D characteristics for fast halo coronal mass ejections (HCMEs) and for HCME-related shocks. With these data, we managed to obtain the B(R) distributions as far as ≈43 solar radii from the Sun's center, which is approximately twice as far as those in other studies based on LASCO data. We have concluded that to improve the accuracy of this method for finding the coronal magnetic field we should develop a technique for detecting CME sites moving in the slow and fast solar wind. We propose a technique for selecting CMEs whose central (paraxial) part actually moves in the slow wind.

  4. Radial distributions of magnetic field strength in the solar corona as derived from data on fast halo CMEs

    Fainshtein V.G.

    2018-03-01

    Full Text Available In recent years, information about the distance between the body of rapid coronal mass ejection (CME and the associated shock wave has been used to measure the magnetic field in the solar corona. In all cases, this technique allows us to find coronal magnetic field radial profiles B(R applied to the directions almost perpendicular to the line of sight. We have determined radial distributions of magnetic field strength along the directions close to the Sun–Earth axis. For this purpose, using the “ice-cream cone” model and SOHO/LASCO data, we found 3D characteristics for fast halo coronal mass ejections (HCMEs and for HCME-related shocks. With these data we managed to obtain the B(R distributions as far as ≈43 solar radii from the Sun's center, which is approximately twice as far as those in other studies based on LASCO data. We have concluded that to improve the accuracy of this method for finding the coronal magnetic field we should develop a technique for detecting CME parts moving in the slow and fast solar wind. We propose a technique for selecting CMEs whose central (paraxial part actually moves in the slow wind.

  5. Ion Exchange Distribution Coefficient Tests and Computer Modeling at High Ionic Strength Supporting Technetium Removal Resin Maturation

    Nash, Charles A. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Hamm, L. Larry [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Smith, Frank G. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); McCabe, Daniel J. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2014-12-19

    The primary treatment of the tank waste at the DOE Hanford site will be done in the Waste Treatment and Immobilization Plant (WTP) that is currently under construction. The baseline plan for this facility is to treat the waste, splitting it into High Level Waste (HLW) and Low Activity Waste (LAW). Both waste streams are then separately vitrified as glass and poured into canisters for disposition. The LAW glass will be disposed onsite in the Integrated Disposal Facility (IDF). There are currently no plans to treat the waste to remove technetium, so its disposition path is the LAW glass. Due to the water solubility properties of pertechnetate and long half-life of 99Tc, effective management of 99Tc is important to the overall success of the Hanford River Protection Project mission. To achieve the full target WTP throughput, additional LAW immobilization capacity is needed, and options are being explored to immobilize the supplemental LAW portion of the tank waste. Removal of 99Tc, followed by off-site disposal, would eliminate a key risk contributor for the IDF Performance Assessment (PA) for supplemental waste forms, and has potential to reduce treatment and disposal costs. Washington River Protection Solutions (WRPS) is developing some conceptual flow sheets for supplemental LAW treatment and disposal that could benefit from technetium removal. One of these flowsheets will specifically examine removing 99Tc from the LAW feed stream to supplemental immobilization. To enable an informed decision regarding the viability of technetium removal, further maturation of available technologies is being performed. This report contains results of experimental ion exchange distribution coefficient testing and computer modeling using the resin SuperLig® 639a to selectively remove perrhenate from high ionic strength simulated LAW. It is advantageous to operate at higher concentration in order to treat the waste

  6. Fusion evaporation residues and the distribution of reaction strength in 16O + 40Ca and 28Si + 28Si reactions

    Kolata, J.J.; Hinnefeld, J.; Kovar, D.G.

    1985-01-01

    In measurements performed previously at ANL, studying the two entrance channels 16 O + 40 Ca and 28 Si + 28 Si which form the same compound nucleus 56 Ni, it was found that at higher bombarding energies (E/sub Lab/ > 5-7 MeV/nucleon) the distributions of reaction strength was dramatically different. Although the total reaction cross section behaviors for the two entrance channels are similar, the total evaporation residue (ER) cross sections for 28 Si + 28 Si decrease rapidly with increasing bombarding energies and up to the highest energy studied show no evidence for incomplete fusion processes. For 16 O + 40 Ca the ER cross section remains constant at approximately 1 barn with increasing bombarding energy and shows evidence of increasing contributions from incomplete fusion. To better understand this apparent dependence on the mass asymmetry in the entrance channel, coincidence measurements between evaporation residue-like products and heavy ions on the opposite side of the beam were performed for the two systems at E/sub Lab/ = 8 MeV/nucleon

  7. Effect of particle size and distribution of the sizing agent on the carbon fibers surface and interfacial shear strength (IFSS) of its composites

    Zhang, R.L.; Liu, Y.; Huang, Y.D.; Liu, L.

    2013-01-01

    Effect of particle size and distribution of the sizing agent on the performance of carbon fiber and carbon fiber composites has been investigated. Atomic force microscopy (AFM) and scanning electron microscopy (SEM) were used to characterize carbon fiber surface topographies. At the same time, the single fiber strength and Weibull distribution were also studied in order to investigate the effect of coatings on the fibers. The interfacial shear strength and hygrothermal aging of the carbon fiber/epoxy resin composites were also measured. The results indicated that the particle size and distribution is important for improving the surface of carbon fibers and its composites performance. Different particle size and distribution of sizing agent has different contribution to the wetting performance of carbon fibers. The fibers sized with P-2 had higher value of IFSS and better hygrothermal aging resistant properties.

  8. Interplay of quasiparticle-vibration coupling and pairing correlations on β-decay half-lives

    Niu, Y. F.; Niu, Z. M.; Colò, G.; Vigezzi, E.

    2018-05-01

    The nuclear β-decay half-lives of Ni and Sn isotopes, around the closed shell nuclei 78Ni and 132Sn, are investigated by computing the distribution of the Gamow-Teller strength using the Quasiparticle Random Phase Approximation (QRPA) with quasiparticle-vibration coupling (QPVC), based on ground-state properties obtained by Hartree-Fock-Bogoliubov (HFB) calculations. We employ the effective interaction SkM* and a zero-range effective pairing force. The half-lives are strongly reduced by including the QPVC. We study in detail the effects of isovector (IV) and isoscalar (IS) pairing. Increasing the IV strength tends to increase the lifetime for nuclei in the proximity of, but lighter than, the closed-shell ones in QRPA calculations, while the effect is significantly reduced by taking into account the QPVC. On the contrary, the IS pairing mainly plays a role for nuclei after the shell closure. Increasing its strength decreases the half-lives, and the effect at QRPA and QRPA+QPVC level is comparable. The effect of IS pairing is particularly pronounced in the case of the Sn isotopes, where it turns out to be instrumental to obtain good agreement with experimental data.

  9. Spin and isospin modes

    Suzuki, T.; Sagawa, H.

    2000-01-01

    Complete text of publication follows. Spin and isospin modes in nuclei are investigated. We discuss some of the following topics. 1. Spin-dipole excitations in 12 C and 16 O are studied (1). Effects of tensor and spin-orbit interactions on the distribution of the strengths are investigated, and neutral current neutrino scattering cross sections in 16 O are obtained for heavy-flavor neutrinos from the supernovae. 2. Gamow-Teller (GT) and spin-dipole (SD) modes in 208 Bi are investigated. Quenching and fragmentation of the GT strength are discussed (2). SD excitations and electric dipole (E1) transitions between the GT and SD states are studied (3). Calculated E1 strengths are compared with the sum rule values obtained within the 1p-1h and 1p-1h + 2p-2h configuration spaces. 3. Coulomb displacement energy (CDE) of the IAS of 14 Be is calculated, and the effects of the halo on the CDE and the configuration of the halo state are investigated. 4. Spreading width of IAS and isospin dependence of the width are investigated (4). Our formula for the width explains very well the observed isospin dependence (5). (author)

  10. Conserving RPA and the response of 48Ca

    Brand, M.G.E.; Allaart, K.; Dickhoff, W.H.

    1988-01-01

    The connection between the single-particle self-energy and the corresponding conserving particle-hole (ph) interaction, discussed long ago by Kadanoff and Baym, is employed to study the response of 48 Ca. Second order self-energy contributions are taken into account in the construction of the energy dependent ph interaction. From this perspective it is possible to make contact with other approaches which also aim to incorporate the coupling to 2p2h excitations within the RPA framework. The method is used to study both the discrete low-energy states as well as the giant resonances in both 48 Ca and 48 Sc using a realistic G matrix interaction based on meson exchange. The calculated strength distribution compares favorably with experimental but the strength below 15 MeV is still somewhat too large as compared to experiment for all types of excitations. The quenching of magnetic and Gamow-Teller strength due to 2p2h admixture amounts to about 30%. (orig.)

  11. Measurement of the resonance at E(lab)=1422 keV in 36Ar(p, γ)37K

    Iliadis, C.; Meissner, J.; Wiescher, M.

    1993-01-01

    Measurements of Gamow-Teller (GT) transition strengths provide information both about the nature of the weak interaction and about the structure of nuclear wave functions. A recent measurement of the Β-delayed proton decay of 37 Ca resulted in a GT strength distribution which disagreed strongly with the results from a forward angle 37 Cl(p,n) 37 Ar experiment. Both results should be identical as long as isospin is a good quantum number. The largest disagreements between the two experiments were found at excitation energies below the isobaric analog state at 5.0 MeV. It has been noted that the discrepancies could be removed if the level at 3.24 MeV in 37 K predominantly decays through the γ-channel rather than the proton channel. Therefore, we have measured the corresponding resonance at 1.42 MeV in the reaction 36 Ar(p,γ) 37 K. The implications with regard to the GT distribution below the IAS will be discussed

  12. FEM Modeling of In-Plane Stress Distribution in Thick Brittle Coatings/Films on Ductile Substrates Subjected to Tensile Stress to Determine Interfacial Strength

    Kaishi Wang

    2018-03-01

    Full Text Available The ceramic-metal interface is present in various material structures and devices that are vulnerable to failures, like cracking, which are typically due to their incompatible properties, e.g., thermal expansion mismatch. In failure of these multilayer systems, interfacial shear strength is a good measure of the robustness of interfaces, especially for planar films. There is a widely-used shear lag model and method by Agrawal and Raj to analyse and measure the interfacial shear strength of thin brittle film on ductile substrates. The use of this classical model for a type of polymer derived ceramic coatings (thickness ~18 μm on steel substrate leads to high values of interfacial shear strength. Here, we present finite element simulations for such a coating system when it is subjected to in-plane tension. Results show that the in-plane stresses in the coating are non-uniform, i.e., varying across the thickness of the film. Therefore, they do not meet one of the basic assumptions of the classical model: uniform in-plane stress. Furthermore, effects of three significant parameters, film thickness, crack spacing, and Young’s modulus, on the in-plane stress distribution have also been investigated. ‘Thickness-averaged In-plane Stress’ (TIS, a new failure criterion, is proposed for estimating the interfacial shear strength, which leads to a more realistic estimation of the tensile strength and interfacial shear strength of thick brittle films/coatings on ductile substrates.

  13. FEM Modeling of In-Plane Stress Distribution in Thick Brittle Coatings/Films on Ductile Substrates Subjected to Tensile Stress to Determine Interfacial Strength.

    Wang, Kaishi; Zhang, Fangzhou; Bordia, Rajendra K

    2018-03-27

    The ceramic-metal interface is present in various material structures and devices that are vulnerable to failures, like cracking, which are typically due to their incompatible properties, e.g., thermal expansion mismatch. In failure of these multilayer systems, interfacial shear strength is a good measure of the robustness of interfaces, especially for planar films. There is a widely-used shear lag model and method by Agrawal and Raj to analyse and measure the interfacial shear strength of thin brittle film on ductile substrates. The use of this classical model for a type of polymer derived ceramic coatings (thickness ~18 μm) on steel substrate leads to high values of interfacial shear strength. Here, we present finite element simulations for such a coating system when it is subjected to in-plane tension. Results show that the in-plane stresses in the coating are non-uniform, i.e., varying across the thickness of the film. Therefore, they do not meet one of the basic assumptions of the classical model: uniform in-plane stress. Furthermore, effects of three significant parameters, film thickness, crack spacing, and Young's modulus, on the in-plane stress distribution have also been investigated. 'Thickness-averaged In-plane Stress' (TIS), a new failure criterion, is proposed for estimating the interfacial shear strength, which leads to a more realistic estimation of the tensile strength and interfacial shear strength of thick brittle films/coatings on ductile substrates.

  14. Scaling strength distributions in quasi-brittle materials from micro-to macro-scales: A computational approach to modeling Nature-inspired structural ceramics

    Genet, Martin; Couegnat, Guillaume; Tomsia, Antoni P.; Ritchie, Robert O.

    2014-01-01

    This paper presents an approach to predict the strength distribution of quasi-brittle materials across multiple length-scales, with emphasis on Nature-inspired ceramic structures. It permits the computation of the failure probability of any structure under any mechanical load, solely based on considerations of the microstructure and its failure properties by naturally incorporating the statistical and size-dependent aspects of failure. We overcome the intrinsic limitations of single periodic unit-based approaches by computing the successive failures of the material components and associated stress redistributions on arbitrary numbers of periodic units. For large size samples, the microscopic cells are replaced by a homogenized continuum with equivalent stochastic and damaged constitutive behavior. After establishing the predictive capabilities of the method, and illustrating its potential relevance to several engineering problems, we employ it in the study of the shape and scaling of strength distributions across differing length-scales for a particular quasi-brittle system. We find that the strength distributions display a Weibull form for samples of size approaching the periodic unit; however, these distributions become closer to normal with further increase in sample size before finally reverting to a Weibull form for macroscopic sized samples. In terms of scaling, we find that the weakest link scaling applies only to microscopic, and not macroscopic scale, samples. These findings are discussed in relation to failure patterns computed at different size-scales. (authors)

  15. Nuclear response theory for spin-isospin excitations in a relativistic quasiparticle-phonon coupling framework

    Robin, Caroline; Litvinova, Elena [Western Michigan University, Department of Physics, Kalamazoo, MI (United States)

    2016-07-15

    A new theoretical approach to spin-isospin excitations in open-shell nuclei is presented. The developed method is based on the relativistic meson-exchange nuclear Lagrangian of Quantum Hadrodynamics and extends the response theory for superfluid nuclear systems beyond relativistic quasiparticle random phase approximation in the proton-neutron channel (pn-RQRPA). The coupling between quasiparticle degrees of freedom and collective vibrations (phonons) introduces a time-dependent effective interaction, in addition to the exchange of pion and ρ-meson taken into account without retardation. The time-dependent contributions are treated in the resonant time-blocking approximation, in analogy to the previously developed relativistic quasiparticle time-blocking approximation (RQTBA) in the neutral (non-isospin-flip) channel. The new method is called proton-neutron RQTBA (pn-RQTBA) and is applied to the Gamow-Teller resonance in a chain of neutron-rich nickel isotopes {sup 68-78}Ni. A strong fragmentation of the resonance along with quenching of the strength, as compared to pn-RQRPA, is obtained. Based on the calculated strength distribution, beta-decay half-lives of the considered isotopes are computed and compared to pn-RQRPA half-lives and to experimental data. It is shown that a considerable improvement of the half-life description is obtained in pn-RQTBA because of the spreading effects, which bring the lifetimes to a very good quantitative agreement with data. (orig.)

  16. Nuclear spin-isospin excitations from covariant quasiparticle-vibration coupling

    Robin, Caroline; Litvinova, Elena

    2016-09-01

    Methods based on the relativistic Lagrangian of quantum hadrodynamics and nuclear field theory provide a consistent framework for the description of nuclear excitations, naturally connecting the high- and medium-energy scales of mesons to the low-energy domain of nucleonic collective motion. Applied in the neutral channel, this approach has been quite successful in describing the overall transition strength up to high excitation energies, as well as fine details of the low-lying distribution. Recently, this method has been extended to the description of spin-isospin excitations in open-shell nuclei. In the charge-exchange channel, the coupling between nucleons and collective vibrations generates a time-dependent proton-neutron effective interaction, in addition to the static pion and rho-meson exchange, and introduces complex configurations that induce fragmentation and spreading of the resonances. Such effects have a great impact on the quenching of the strength and on the computing of weak reaction rates that are needed for astrophysics modeling. Gamow-Teller transitions in medium-mass nuclei and associated beta-decay half-lives will be presented. Further developments aiming to include additional ground-state correlations will also be discussed. This work is supported by US-NSF Grants PHY-1404343 and PHY-1204486.

  17. Nuclear structure and weak rates of heavy waiting point nuclei under rp-process conditions

    Nabi, Jameel-Un; Böyükata, Mahmut

    2017-01-01

    The structure and the weak interaction mediated rates of the heavy waiting point (WP) nuclei 80Zr, 84Mo, 88Ru, 92Pd and 96Cd along N = Z line were studied within the interacting boson model-1 (IBM-1) and the proton-neutron quasi-particle random phase approximation (pn-QRPA). The energy levels of the N = Z WP nuclei were calculated by fitting the essential parameters of IBM-1 Hamiltonian and their geometric shapes were predicted by plotting potential energy surfaces (PESs). Half-lives, continuum electron capture rates, positron decay rates, electron capture cross sections of WP nuclei, energy rates of β-delayed protons and their emission probabilities were later calculated using the pn-QRPA. The calculated Gamow-Teller strength distributions were compared with previous calculation. We present positron decay and continuum electron capture rates on these WP nuclei under rp-process conditions using the same model. For the rp-process conditions, the calculated total weak rates are twice the Skyrme HF+BCS+QRPA rates for 80Zr. For remaining nuclei the two calculations compare well. The electron capture rates are significant and compete well with the corresponding positron decay rates under rp-process conditions. The finding of the present study supports that electron capture rates form an integral part of the weak rates under rp-process conditions and has an important role for the nuclear model calculations.

  18. Weak-interaction rates in stellar conditions

    Sarriguren, Pedro

    2018-05-01

    Weak-interaction rates, including β-decay and electron captures, are studied in several mass regions at various densities and temperatures of astrophysical interest. In particular, we study odd-A nuclei in the pf-shell region, which are involved in presupernova formations. Weak rates are relevant to understand the late stages of the stellar evolution, as well as the nucleosynthesis of heavy nuclei. The nuclear structure involved in the weak processes is studied within a quasiparticle proton-neutron random-phase approximation with residual interactions in both particle-hole and particle-particle channels on top of a deformed Skyrme Hartree-Fock mean field with pairing correlations. First, the energy distributions of the Gamow-Teller strength are discussed and compared with the available experimental information, measured under terrestrial conditions from charge-exchange reactions. Then, the sensitivity of the weak-interaction rates to both astrophysical densities and temperatures is studied. Special attention is paid to the relative contribution to these rates of thermally populated excited states in the decaying nucleus and to the electron captures from the degenerate electron plasma.

  19. Statistical and non statistical models for delayed neutron emission: applications to nuclei near A = 90

    De Oliveira, Z.M.

    1980-01-01

    A detailed analysis of the simple statistical model description for delayed neutron emission of 87 Br, 137 I, 85 As and 135 Sb has been performed. In agreement with experimental findings, structure in the #betta#-strength function is required to reproduce the envelope of the neutron spectrum from 87 Br. For 85 As and 135 Sb the model is found incapable of simultaneously reproducing envelopes of delayed neutron spectra and neutron branching ratios to excited states in the final nuclei for any choice of #betta#-strength function. The results indicate that partial widths for neutron emission are not compatible with optical-model transmission coefficients. The simple shell model with pairing is shown to qualitatively describe the main features of the #betta#-strength functions for decay of 87 Br and 91 93 95 97 Rb. It is found that the location of apparent resonances in the experimental data are in rough agreement with the location of centroids of strength calculated with this model. An extension of the shell model picture which includes the Gamow-Teller residual interaction is used to investigate decay properties of 84 86 As, 86 92 Br and 88 102 Rb. For a realistic choice of interaction strength, the half lives of these isotopes are fairly well reproduced and semiquantitative agreement with experimental #betta#-strength functions is found. Delayed neutron emission probabilities are reproduced for precursors nearer stability with systematic deviations being observed for the heavier nuclei. Contrary to the assumption of a structureless Gamow-Teller giant resonance as embodied gross theory of #betta#-decay, we find that structures in the tail of the Gamow-Teller giant resonances are expected which strongly influence the decay properties of nuclides in this region

  20. Reliability estimation of a N- M-cold-standby redundancy system in a multicomponent stress-strength model with generalized half-logistic distribution

    Liu, Yiming; Shi, Yimin; Bai, Xuchao; Zhan, Pei

    2018-01-01

    In this paper, we study the estimation for the reliability of a multicomponent system, named N- M-cold-standby redundancy system, based on progressive Type-II censoring sample. In the system, there are N subsystems consisting of M statistically independent distributed strength components, and only one of these subsystems works under the impact of stresses at a time and the others remain as standbys. Whenever the working subsystem fails, one from the standbys takes its place. The system fails when the entire subsystems fail. It is supposed that the underlying distributions of random strength and stress both belong to the generalized half-logistic distribution with different shape parameter. The reliability of the system is estimated by using both classical and Bayesian statistical inference. Uniformly minimum variance unbiased estimator and maximum likelihood estimator for the reliability of the system are derived. Under squared error loss function, the exact expression of the Bayes estimator for the reliability of the system is developed by using the Gauss hypergeometric function. The asymptotic confidence interval and corresponding coverage probabilities are derived based on both the Fisher and the observed information matrices. The approximate highest probability density credible interval is constructed by using Monte Carlo method. Monte Carlo simulations are performed to compare the performances of the proposed reliability estimators. A real data set is also analyzed for an illustration of the findings.

  1. Charge exchange reactions and the efficiency of solar neutrino detectors

    Austin, S.M.; Anantaraman, N.; Love, W.G.

    1994-01-01

    The efficiencies of solar neutrino detectors are often based in part on weak interaction strengths determined by (p,n) and other charge exchange reactions. Although the (p,n) determinations are surprisingly good, it is shown that they may be inaccurate for important Gamow-Teller transitions whose strengths are a small fraction of the sum rule limit. This emphasizes the importance of direct calibration with ν sources for detectors such as 127 I and 115 In where direct β-decay information cannot be obtained. It may also bear on recent attempts to compare charge exchange and beta decay in the mass-37 system

  2. Weak interaction rates

    Sugarbaker, E.

    1995-01-01

    I review available techniques for extraction of weak interaction rates in nuclei. The case for using hadron charge exchange reactions to estimate such rates is presented and contrasted with alternate methods. Limitations of the (p,n) reaction as a probe of Gamow-Teller strength are considered. Review of recent comparisons between beta-decay studies and (p,n) is made, leading to cautious optimism regarding the final usefulness of (p,n)- derived GT strengths to the field of astrophysics. copyright 1995 American Institute of Physics

  3. FINITE-ELEMENT MODELING OF HOT FORMING OF BUSHES MADE FROM HIGH-STRENGTH CAST IRON WITH A GRADIENT DISTRIBUTION OF GRAPHITE INCLUSIONS OVER CROSS-SECTION

    A. I. Pokrovsky

    2016-01-01

    Full Text Available Imitation modeling of direct hot extrusion of bushes made from high-strength cast iron is performed using finite-element method. The evolution of stress and strain fields during processing and the probability of crack formation are evaluated. The specific feature of the work is that during hot forming a special technique was used which permitted obtaining a gradient distribution of graphite inclusions over the cross-section of bushes. The results of modeling are used in certain technologies which are implemented in industrial practice.

  4. The startup performance and microbial distribution of an anaerobic baffled reactor (ABR) treating medium-strength synthetic industrial wastewater.

    Jiang, Hao; Nie, Hong; Ding, Jiangtao; Stinner, Walter; Sun, Kaixuan; Zhou, Hongjun

    2018-01-02

    In this study, an anaerobic baffled reactor (ABR) with seven chambers was applied to treat medium-strength synthetic industrial wastewater (MSIW). The performance of startup and shock test on treating MSIW was investigated. During the acclimation process, the chemical oxygen demand (COD) of MSIW gradually increased from 0 to 2,000 mg L -1 , and the COD removal finally reached 90%. At shock test, the feeding COD concentration increased by one-fifth and the reactor adapted very well with a COD removal of 82%. In a stable state, Comamonas, Smithella, Syntrophomonas and Pseudomonas were the main populations of bacteria, while the predominant methanogen was Methanobacterium. The results of chemical and microbiological analysis indicated the significant advantages of ABR, including buffering shocks, separating stages with matching microorganisms and promoting syntrophism. Meanwhile, the strategies for acclimation and operation were of great importance. Further work can test reactor performance in the treatment of actual industrial wastewater.

  5. Low-lying magnetic dipole strength distribution in the γ-soft even-even 130-136Ba

    Guliyev, E.; Ertugral, F.; Kuliev, A.A.

    2006-01-01

    In this study the scissors mode 1 + states are systematically investigated within the rotational invariant Quasiparticle Random Phase Approximation (QRPA) for 130-136 Ba isotopes. We consider the 1 + vibrations generated by the isovector spin-spin interactions and the isoscalar and isovector quadrupole-type separable forces restoring the broken symmetry by a deformed mean field according to A.A. Kuliev et al. (Int. J. Mod. Phys. E 9, 249 (2000)). It has been shown that the restoration of the broken rotational symmetry of the Hamiltonian essentially decreases the B(M1) value of the low-lying 1 + states and increases the collectivization of the scissors mode excitations in the spectroscopic energy region. The agreement between the calculated mean excitation energies as well as the summed B(M1) value of the scissors mode excitations and the available experimental data of 134 Ba and 136 Ba is rather good. A destructive interference between the orbit and spin part of the M1 strength has been found for barium isotopes near the shell closer. For all the nuclei under investigation, the low-lying M1 transitions have ΔK=1 character as it is the case for the well-deformed nuclei. (orig.)

  6. Beta-decay of 56Cu

    Ramdhane, M.; Baumann, P.; Knipper, A.; Walter, G.; Janas, Z.; Plochocki, A.; Liu, W.; Grawe, H.; Hu, Z.; Kirchner, R.; Klepper, O.; Roeckl, E.; Gorska, M.; Fujita, Y.; Brown, B.A.

    1998-02-01

    By measuring positrons and β-delayed γ-rays emitted from mass-separated sources, the decay of 56 Cu(4 + ,T z =-1,T=1) to states in the doubly-magic nucleus 56 Ni was studied for the first time. The half-life of 56 Cu was measured to be 78(15) ms, and four β-delayed γ-rays were assigned to its decay. The resulting experimental data on Fermi and Gamow-Teller strength are compared with shell-model predictions. (orig.)

  7. Quasielastic nucleon scattering using polarized beams and targets

    Haeusser, O.

    1990-07-01

    Inelastic scattering of polarized intermediate energy nucleons to continuum nuclear states is discussed with emphasis on recent results. Spin momentum correlations of protons in polarized targets of 3 He were observed for the first time. Complete spin observables in (p,p') show effects of the nuclear spin-isospin response and of an NN interaction modified by the nuclear medium. A comparison of Gamow Teller and isovector M1 giant resonance strengths in the sd shell provides evidence for large meson exchange current effects in the M1. (Author) (37 refs., 2 tabs., 9 figs.)

  8. Half-life determination of T{sub z} = -1 and T{sub z} = -(1)/(2) proton-rich nuclei and the β decay of {sup 58}Zn

    Kucuk, L.; Oktem, Y.; Cakirli, R.B.; Ganioglu, E.; Susoy, G. [Istanbul University, Department of Physics, Istanbul (Turkey); Orrigo, S.E.A.; Montaner-Piza, A.; Rubio, B. [CSIC-Universidad de Valencia, Instituto de Fisica Corpuscular, Valencia (Spain); Fujita, Y. [Osaka University, Department of Physics, Toyonaka, Osaka (Japan); Osaka University, Research Center for Nuclear Physics, Ibaraki, Osaka (Japan); Gelletly, W. [CSIC-Universidad de Valencia, Instituto de Fisica Corpuscular, Valencia (Spain); University of Surrey, Department of Physics, Guildford, Surrey (United Kingdom); Blank, B.; Ascher, P.; Giovinazzo, J.; Grevy, S. [Centre d' Etudes Nucleaires de Bordeaux Gradignan, CNRS/IN2P3 - Universite de Bordeaux, Gradignan (France); Adachi, T.; Fujita, H.; Tamii, A. [Osaka University, Research Center for Nuclear Physics, Ibaraki, Osaka (Japan); Algora, A. [CSIC-Universidad de Valencia, Instituto de Fisica Corpuscular, Valencia (Spain); Inst. of Nuclear Research of the Hung. Acad. of Sciences, Debrecen (Hungary); France, G. de; Oliveira Santos, F. de; Thomas, J.C. [Grand Accelerateur National d' Ions Lourds (GANIL), CEA/DRF-CNRS/IN2P3, Caen (France); Marques, F.M. [Laboratoire de Physique Corpusculaire de Caen, ENSICAEN, UNICAEN, IN2P3/CNRS, Caen (France); Molina, F. [CSIC-Universidad de Valencia, Instituto de Fisica Corpuscular, Valencia (Spain); Comision Chilena de Energia Nuclear, Casilla 188-D, Santiago (Chile); Perrot, L. [IPN Orsay, Orsay (France); Raabe, R. [Grand Accelerateur National d' Ions Lourds (GANIL), CEA/DRF-CNRS/IN2P3, Caen (France); KU Leuven, Instituut voor Kern- en Stralingsfysica, Leuven (Belgium); Srivastava, P.C. [Grand Accelerateur National d' Ions Lourds (GANIL), CEA/DRF-CNRS/IN2P3, Caen (France); Indian Institute of Technology, Department of Physics, Roorkee (India)

    2017-06-15

    We have measured the β-decay half-lives of 16 neutron-deficient nuclei with T{sub z} = -1/2 and -1, ranging from chromium to germanium. They were produced in an experiment carried out at GANIL and optimized for the production of {sup 58}Zn, for which in addition we present the decay scheme and absolute Fermi and Gamow-Teller transition strengths. Since all of these nuclei lie on the rp-process pathway, the T{sub 1/2} values are important ingredients for the rp-process reaction flow calculations and for models of X-ray bursters. (orig.)

  9. Multipole decomposition analysis of the 27Al, 90Zr, 208Pb(p, n) reactions at 295 MeV

    Wakasa, T.; Greenfield, M.B.; Koori, N.; Okihana, A.; Hatanaka, K.

    1996-01-01

    Differential cross sections at θ lab between 0 and 15 and the polarization transfer D NN at zero degrees for the 27 Al, 90 Zr, 208 Pb(p,n) reactions are measured at a bombarding energy of 295 MeV. A multipole decomposition (MD) technique is applied to extract L=0, L=1, and L≥2 contributions to the cross sections. The summed Gamow-Teller strength B(GT) is compared with shell-model calculations for the 27 Al(p,n) and 90 Zr(p,n) reactions. The usefulness of the polarization transfer observable in the MD analysis is discussed. (orig.)

  10. Isovector excitations of N ≠ Z nuclei

    Passos, E.J.V. de; Menezes, D.P.; Galeao, A.P.N.R.

    1987-09-01

    We show that the method based on the tensor coupling of an appropriate family of isovector excitation operators to the parent isospin multiplet can be used, to advantage, for the correct treatment of the isospin degree of freedom in non isoscalar nuclei. This method is applicable to any isovector excitation operator and for parent states which need not to be of the closed subshells type. As an illustration we apply it to the study of the Gamow-Teller transition strength in 90 Zr. (author) [pt

  11. β-decay of 37Ca

    Trinder, W.; Adelberger, E.G.; Keller, H.; Krumbholz, K.; Rykaczewski, K.

    1994-11-01

    The β-decay of 37 Ca has been studied. The half-life was remeasured with improved precision to be 181(1) ms, and β-delayed γ-rays were observed for the first time. The surprisingly high Γ γ /Γ p values for proton-unbound states in 37 K drastically reduce former discrepancies between the Gamow-Teller strength values B(GT) measured in the 37 Ga β-decay and those deduced from the 37 Cl(p, n) 37 Ar mirror reaction. (orig.)

  12. Beta-decay of {sup 56}Cu

    Ramdhane, M.; Baumann, P.; Knipper, A.; Walter, G. [Institute de Recherches Subatomiques, 67 - Strasbourg (France); Janas, Z.; Plochocki, A. [Warsaw Univ. (Poland). Inst. of Experimental Physics; Aeystoe, J.; Dendooven, P.; Jokinen, A.; Oinonen, M.; Pentilae, H. [Jyvaeskylae Univ. (Finland); Liu, W.; Grawe, H.; Hu, Z.; Kirchner, R.; Klepper, O.; Roeckl, E. [Gesellschaft fuer Schwerionenforschung mbH, Darmstadt (Germany); Gorska, M. [Warsaw Univ. (Poland). Inst. of Experimental Physics]|[Gesellschaft fuer Schwerionenforschung mbH, Darmstadt (Germany); Fujita, Y. [Osaka Univ. (Japan); Brown, B.A. [Michigan State Univ., East Lansing, MI (United States)

    1998-02-01

    By measuring positrons and {beta}-delayed {gamma}-rays emitted from mass-separated sources, the decay of {sup 56}Cu(4{sup +},T{sub z}=-1,T=1) to states in the doubly-magic nucleus {sup 56}Ni was studied for the first time. The half-life of {sup 56}Cu was measured to be 78(15) ms, and four {beta}-delayed {gamma}-rays were assigned to its decay. The resulting experimental data on Fermi and Gamow-Teller strength are compared with shell-model predictions. (orig.)

  13. Probing the N = Z Line via β Decay

    Markku Oinonen

    1999-01-01

    This contribution reports several beta-decay studies performed at ISOLDE On-Line Mass Separator at CERN recently for nuclei close to N = Z line. Beta decay of 58 Zn provides a possibility to compare Gamow-Teller strength extracted from complementary beta-decay studies and charge-exchange reactions. Measurement on beta-decay half-life of 70 Kr shows importance of experimental information in modeling the path of the astrophysical rp process. Decay of 71 Kr is an example of a mirror beta decay and extends the systematics of these particular decays towards highly deformed region close to A = 80

  14. Electron-capture Rates for pf-shell Nuclei in Stellar Environments and Nucleosynthesis

    Suzuki, Toshio; Honma, Michio; Mori, Kanji; Famiano, Michael A.; Kajino, Toshitaka; Hidakai, Jun; Otsuka, Takaharu

    Gamow-Teller strengths in pf-shell nuclei obtained by a new shell-model Hamltonian, GXPF1J, are used to evaluate electron-capture rates in pf-shell nuclei at stellar environments. The nuclear weak rates with GXPF1J, which are generally smaller than previous evaluations for proton-rich nuclei, are applied to nucleosynthesis in type Ia supernova explosions. The updated rates are found to lead to less production of neutron-rich nuclei such as 58Ni and 54Cr, thus toward a solution of the problem of over-production of neutron-rich isotopes of iron-group nuclei compared to the solar abundance.

  15. Shell-model calculations of beta-decay rates for s- and r-process nucleosyntheses

    Takahashi, K.; Mathews, G.J.; Bloom, S.D.

    1985-01-01

    Examples of large-basis shell-model calculations of Gamow-Teller β-decay properties of specific interest in the astrophysical s- and r- processes are presented. Numerical results are given for: (1) the GT-matrix elements for the excited state decays of the unstable s-process nucleus 99 Tc; and (2) the GT-strength function for the neutron-rich nucleus 130 Cd, which lies on the r-process path. The results are discussed in conjunction with the astrophysics problems. 23 refs., 3 figs

  16. Beta decay and structure of exotic nuclei in the mass regions N=Z, A {approx} 70 and near the N=20 closed shell

    Courtin, S.; Baumann, P.; Dessagne, Ph.; Marechal, F.; Miehe, Ch.; Perrot, F.; Poirier, E.; Ramdhane, M. [Institut de Recherches Subatomiques, Strasbourg Cedex 2 (France); ISOLDE collaboration

    2004-09-15

    This paper describes two beta decay experiments performed at the CERN/ISOLDE mass separator. The structure of {sup 74}Kr has been studied using a total absorption {gamma} spectrometer (TAgS). The measured Gamow-Teller strength is presented and compared to HFBCS+QRPA calculations. The {sup 33}Na decay is also presented. The structure of the {sup 33}Mg daughter nucleus is compared to shell-model calculations, showing for the first time an inversion of states in the A{sub {approx}}35 mass region. (author)

  17. Nuclear spin and isospin excitations

    Osterfeld, F.

    1992-01-01

    A review is given of our present knowledge of collective spin-isospin excitations in nuclei. Most of this knowledge comes from intermediate-energy charge-exchange reactions and from inelastic electron- and proton-scattering experiments. The nuclear-spin dynamics is governed by the spin-isospin-dependent two-nucleon interaction in the medium. This interaction gives rise to collective spin modes such as the giant Gamow-Teller resonances. An interesting phenomenon is that the measured total Gamow-Teller transition strength in the resonance region is much less than a model-independent sum rule predicts. Two physically different mechanisms have been discussed to explain this so-called quenching of the total Gamow-Teller strength: coupling to subnuclear degrees of freedom in the form of Δ-isobar excitation and ordinary nuclear configuration mixing. Both detailed nuclear structure calculations and extensive analyses of the scattering data suggest that the nuclear configuration mixing effect is the more important quenching mechanism, although subnuclear degrees of freedom cannot be ruled out. The quenching phenomenon occurs for nuclear-spin excitations at low excitation energies (ω∼10--20 MeV) and small-momentum transfers (q≤0.5 fm -1 ). A completely opposite effect is anticipated in the high (ω,q)-transfer region (0≤ω≤500 MeV, 0.5≤q≤3 fm -1 ). The nuclear spin-isospin response might be enhanced due to the attractive pion field inside the nucleus. Charge-exchange reactions at GeV incident energies have been used to study the quasifree peak region and the Δ-resonance region. An interesting result of these experiments is that the Δ excitation in the nucleus is shifted downwards in energy relative to the Δ excitation of the free proton

  18. Application of the Multi-Doorway Continuum Shell Model to the Magnetic Dipole Strength Distribution in 58Ni

    Spangenberger, H.; Beck, F.; Richter, A.

    The usual continuum shell model is extended so as to include a statistical treatment of multi-doorway processes. The total configuration space of the nuclear reaction problem is subdivided into the primary doorway states which are coupled by the initial excitation to the nuclear ground state and the secondary doorway states which represent the complicated nature of multi-step reactions. The latter are evaluated within the exciton model which gives the coupling widths between the various finestructure subspaces. This coupling is determined by a statistical factor related to the exciton model and a dynamical factor given by the interaction matrix elements of the interacting excitons. The whole structure defines the multi-doorway continuum shell model. In this work it is applied to the highly fragmented magnetic dipole strength in 58Ni observed in high resolution electron scattering.Translated AbstractAnwendung des Multi-Doorway-Kontinuum-Schalenmodells auf die Verteilung der magnetischen Dipolstärke von 58NiDas Kontinuum-Schalenmodell wurde so erweitert, daß auch statistische Multi-Doorway-Prozesse berücksichtigt werden können. Hierzu wird der Konfigurationsraum unterteilt in den Raum der primären Doorway-Zustände, die direkt aus dem Grundzustand angeregt werden, und den der sekundären Doorway-Zustände, die die komplizierte Struktur der Multi-Step-Reaktionen repräsentieren. Während die primären Doorway-Zustände inclusive ihrer Anregungen mittels üblicher Schalenmodellmethoden beschrieben werden können, werden die sekundären Doorway-Zustände sowie ihre verschiedenen Kopplungen im Rahmen des Exciton-Modells behandelt. Diese Kopplungen sind durch einen aus dem Exciton-Modell resultierenden Faktor sowie durch einen dynamischen Faktor bestimmt, der sich aus dem Matrixelement der wechselwirkenden Excitonen berechnet. Die Struktur der Kopplungen definiert das Multi-Doorway-Kontinuum-Schalenmodell, das hier auf die Beschreibung der stark fragmentierten

  19. Detailing magnetic field strength dependence and segmental artifact distribution of myocardial effective transverse relaxation rate at 1.5, 3.0, and 7.0 T.

    Meloni, Antonella; Hezel, Fabian; Positano, Vincenzo; Keilberg, Petra; Pepe, Alessia; Lombardi, Massimo; Niendorf, Thoralf

    2014-06-01

    Realizing the challenges and opportunities of effective transverse relaxation rate (R2 *) mapping at high and ultrahigh fields, this work examines magnetic field strength (B0 ) dependence and segmental artifact distribution of myocardial R2 * at 1.5, 3.0, and 7.0 T. Healthy subjects were considered. Three short-axis views of the left ventricle were examined. R2 * was calculated for 16 standard myocardial segments. Global and mid-septum R2 * were determined. For each segment, an artifactual factor was estimated as the deviation of segmental from global R2 * value. The global artifactual factor was significantly enlarged at 7.0 T versus 1.5 T (P = 0.010) but not versus 3.0 T. At 7.0 T, the most severe susceptibility artifacts were detected in the inferior lateral wall. The mid-septum showed minor artifactual factors at 7.0 T, similar to those at 1.5 and 3.0 T. Mean R2 * increased linearly with the field strength, with larger changes for global heart R2 * values. At 7.0 T, segmental heart R2 * analysis is challenging due to macroscopic susceptibility artifacts induced by the heart-lung interface and the posterior vein. Myocardial R2 * depends linearly on the magnetic field strength. The increased R2 * sensitivity at 7.0 T might offer means for susceptibility-weighted and oxygenation level-dependent MR imaging of the myocardium. Copyright © 2013 Wiley Periodicals, Inc.

  20. Notes for lectures in China: distribution of the oscillator strength over the entire range of excitation energy for atoms, molecules, and solids

    Inokuti, M.

    1984-01-01

    Consider the intensity of absorption of a photon (i.e., the photoabsorption cross section) as a function of photon energy E. Apart from some intensity related to pure nuclear motion and spins, the (electronic) absorption begins at several eV (i.e., in the visible region or the near ultraviolet region). It becomes stronger at tens of eV's (i.e., in the far ultraviolet), and gradually diminishes at higher E. However, the intensity enhances again as E becomes comparable to an inner-shell binding energy. This repeats throughout the x-ray region until E greatly exceeds the K-shell binding energy. I shall discuss the gross variation of the absorption intensity with E. This intensity, suitably normalized, is the oscillator-strength distribution df/dE

  1. The Grilled Effect of Particle's Distribution of Calsine Coke's at 900oC Temperature upon the Electric Resistivity, Hardness and CompressiveStrength Analysis

    NS, Kasilani; D, Imam; Dwi-Herwidhi

    2000-01-01

    Investigation of Calsine Coke's particle's distribution by grilledtreatment at 900 o C temperature upon the electric resistivity, hardness andcompressive strength analysis had been done. The Calsine Coke's were crushedand sieved to get a particle size about 63; 90; 106 μm, then mixed thevariety size particle with 33 % tar pitch 125 μm, be heated, shaped andpressed to be pellet. The pellets were grilled at 900 o C temperature during30 minutes and then these were analyzed. The whole analysis using 2-b mixedwas the best, particle ratio were 63:106 = 1:2 and pointed the electricresistivity 2.63 Ωm, the hardness 5.9 kg/mm 2 and the compressivestrength 1600 N. (author)

  2. Beta decay and strength distributions

    Hardy, J.C.

    1980-01-01

    With the increasing accessibility of nuclei far from stability, experimenters find themselves faced more and more often with complex β-decay schemes: nuclei with over 5 MeV of β-decay energy, exhibiting hundreds and perhaps thousands of transitions. A detailed level-by-level exposition of such schemes - for example, by studying β-delayed γ-rays - is at best prohibitively time consuming, and at worst actually impossible with current techniques. Furthermore, even if reliable schemes are obtained experimentally, their confrontation with theory is severely limited by the absence of theories sufficiently complete to account for such complex spectra. At best, it is the details of the first few excited states and the general features of the rest that are useful for comparison. From both points of view, experimental and theoretical, there is strong motivation to find a broader perspective, emphasizing these general features without being overwhelmed by a proliferation of detail

  3. Tz=-1 →0 β decays of 54Ni,50Fe,46Cr, and 42Ti and comparison with mirror (3He,t ) measurements

    Molina, F.; Rubio, B.; Fujita, Y.; Gelletly, W.; Agramunt, J.; Algora, A.; Benlliure, J.; Boutachkov, P.; Cáceres, L.; Cakirli, R. B.; Casarejos, E.; Domingo-Pardo, C.; Doornenbal, P.; Gadea, A.; Ganioǧlu, E.; Gascón, M.; Geissel, H.; Gerl, J.; Górska, M.; GrÈ©bosz, J.; Hoischen, R.; Kumar, R.; Kurz, N.; Kojouharov, I.; Susam, L. Amon; Matsubara, H.; Morales, A. I.; Oktem, Y.; Pauwels, D.; Pérez-Loureiro, D.; Pietri, S.; Podolyák, Zs.; Prokopowicz, W.; Rudolph, D.; Schaffner, H.; Steer, S. J.; Tain, J. L.; Tamii, A.; Tashenov, S.; Valiente-Dobón, J. J.; Verma, S.; Wollersheim, H.-J.

    2015-01-01

    We have studied the β decay of the Tz=-1 ,f7 /2 shell nuclei 54Ni,50Fe,46Cr, and 42Ti produced in fragmentation reactions. The proton separation energies in the daughter Tz=0 nuclei are relatively large (≈4 -5 MeV) so studies of the γ rays are essential. The experiments were performed at GSI as part of the Stopped-beam campaign with the RISING setup consisting of 15 Euroball Cluster Ge detectors. From the newly obtained high precision β -decay half-lives, excitation energies, and β branching ratios, we were able to extract Fermi and Gamow-Teller transition strengths in these β decays. With these improved results it was possible to compare in detail the Gamow-Teller (GT) transition strengths observed in beta decay including a sensitivity limit with the strengths of the Tz=+1 to Tz=0 transitions derived from high resolution (3He ,t ) reactions on the mirror target nuclei at RCNP, Osaka. The accumulated B (GT) strength obtained from both experiments looks very similar although the charge exchange reaction provides information on a broader energy range. Using the "merged analysis" one can obtain a full picture of the B (GT) over the full Qβ range. Looking at the individual transitions some differences are observed, especially for the weak transitions. Their possible origins are discussed.

  4. Investigation of the role of the rho-meson exchange in spin-isospin strength distribution effects in a finite nucleus

    Cohen, J.

    1984-01-01

    We present a unified study of the role of the rho-exchange interaction in spin-isospin strength distribution effects in a finite nuclear system. We study both the longitudinal (sigma-arrow-rightxqtau/sub lambda/, where q is the momentum transfer to the nucleus) and the transverse (sigma-arrow-right x qtau/sub lambda/) spin channels for a large range of momentum transfer (qapprox.0--600 MeV/c). We examine a number of effective rho-coupling schemes used in the literature. Using the finite-nucleus formalism of Toki and Weise, we examine in detail the response function in the presence of the rho-meson exchange term. The renormalization of matrix elements of spin-isospin sensitive probes is given for the J/sup P/ = 1 + , T = 1 level of 12 C. We analyze the results, gaining some insight into the nature of the longitudinal versus transverse channels and into approximations suggested in the past for handling finite-nucleus calculations. A comparison with local density approximation and infinite nuclear matter with a constant density results is presented for a variety of cases

  5. Decay Properties of the Halo Nucleus $^{11}$Li

    2002-01-01

    During the past years a considerable experimental effort has been devoted to the production and study of nuclei close to the neutron and proton drip-lines. The most spectacular phenomenon encountered is the occurrence of neutron halos in the loosely bound neutron rich nuclei. \\\\ \\\\ Another interesting feature, observed at ISOLDE, which most likely is connected to the halo structure, is the very strong (super-allowed) Gamow-Teller $\\beta$- transitions to highly excited states which are systematically observed for the lightest neutron rich drip-line nuclei. These transitions might be viewed as arising from the quasi-free $\\beta$ -decay of the halo neutrons. It is proposed to make a detailed study of the $\\beta$- strength function for $^{11}$Li, a nuclide having a half-life of 8.2 ms and a Q $\\beta$-value of 20.73~MeV. \\\\ \\\\ So far only a lower limit of the Gamow-Teller transition rate to highly excited states ($\\approx$~18.5~MeV) in the daughter nucleus has been obtained from measurements of $\\beta$-delayed tri...

  6. Distribution

    John R. Jones

    1985-01-01

    Quaking aspen is the most widely distributed native North American tree species (Little 1971, Sargent 1890). It grows in a great diversity of regions, environments, and communities (Harshberger 1911). Only one deciduous tree species in the world, the closely related Eurasian aspen (Populus tremula), has a wider range (Weigle and Frothingham 1911)....

  7. The effect of strength and endurance training on insulin sensitivity and fat distribution in human immunodeficiency virus-infected patients with lipodystrophy

    Lindegaard, B; Hansen, T; Hvid, T

    2008-01-01

    CONTEXT: Fat redistribution, insulin resistance, and low-grade inflammation characterize HIV-infected patients with lipodystrophy. Currently, no effective therapies exist for the combined treatment of fat redistribution and insulin resistance. OBJECTIVE: Our objective was to evaluate the effects...... increased with both endurance training (55.7 +/- 11 to 63.0 +/- 11 micromol glucose/kg lean mass.min, P = 0.02) and strength training (49.0 +/- 12 to 57.8 +/- 18 micromol glucose/kg lean mass.min, P = 0.005), irrespective of training modality (P = 0.24). Only strength training increased total lean mass 2...

  8. β-Decay half-lives and nuclear structure of exotic proton-rich waiting point nuclei under rp-process conditions

    Nabi, Jameel-Un; Böyükata, Mahmut

    2016-03-01

    We investigate even-even nuclei in the A ∼ 70 mass region within the framework of the proton-neutron quasi-particle random phase approximation (pn-QRPA) and the interacting boson model-1 (IBM-1). Our work includes calculation of the energy spectra and the potential energy surfaces V (β , γ) of Zn, Ge, Se, Kr and Sr nuclei with the same proton and neutron number, N = Z. The parametrization of the IBM-1 Hamiltonian was performed for the calculation of the energy levels in the ground state bands. Geometric shape of the nuclei was predicted by plotting the potential energy surfaces V (β , γ) obtained from the IBM-1 Hamiltonian in the classical limit. The pn-QRPA model was later used to compute half-lives of the neutron-deficient nuclei which were found to be in very good agreement with the measured ones. The pn-QRPA model was also used to calculate the Gamow-Teller strength distributions and was found to be in decent agreement with the measured data. We further calculate the electron capture and positron decay rates for these N = Z waiting point (WP) nuclei in the stellar environment employing the pn-QRPA model. For the rp-process conditions, our total weak rates are within a factor two compared with the Skyrme HF +BCS +QRPA calculation. All calculated electron capture rates are comparable to the competing positron decay rates under rp-process conditions. Our study confirms the finding that electron capture rates form an integral part of the weak rates under rp-process conditions and should not be neglected in the nuclear network calculations.

  9. Attitude Strength.

    Howe, Lauren C; Krosnick, Jon A

    2017-01-03

    Attitude strength has been the focus of a huge volume of research in psychology and related sciences for decades. The insights offered by this literature have tremendous value for understanding attitude functioning and structure and for the effective application of the attitude concept in applied settings. This is the first Annual Review of Psychology article on the topic, and it offers a review of theory and evidence regarding one of the most researched strength-related attitude features: attitude importance. Personal importance is attached to an attitude when the attitude is perceived to be relevant to self-interest, social identification with reference groups or reference individuals, and values. Attaching personal importance to an attitude causes crystallizing of attitudes (via enhanced resistance to change), effortful gathering and processing of relevant information, accumulation of a large store of well-organized relevant information in long-term memory, enhanced attitude extremity and accessibility, enhanced attitude impact on the regulation of interpersonal attraction, energizing of emotional reactions, and enhanced impact of attitudes on behavioral intentions and action. Thus, important attitudes are real and consequential psychological forces, and their study offers opportunities for addressing behavioral change.

  10. Temporal Changes in Stress Drop, Frictional Strength, and Earthquake Size Distribution in the 2011 Yamagata-Fukushima, NE Japan, Earthquake Swarm, Caused by Fluid Migration

    Yoshida, Keisuke; Saito, Tatsuhiko; Urata, Yumi; Asano, Youichi; Hasegawa, Akira

    2017-12-01

    In this study, we investigated temporal variations in stress drop and b-value in the earthquake swarm that occurred at the Yamagata-Fukushima border, NE Japan, after the 2011 Tohoku-Oki earthquake. In this swarm, frictional strengths were estimated to have changed with time due to fluid diffusion. We first estimated the source spectra for 1,800 earthquakes with 2.0 ≤ MJMA < 3.0, by correcting the site-amplification and attenuation effects determined using both S waves and coda waves. We then determined corner frequency assuming the omega-square model and estimated stress drop for 1,693 earthquakes. We found that the estimated stress drops tended to have values of 1-4 MPa and that stress drops significantly changed with time. In particular, the estimated stress drops were very small at the beginning, and increased with time for 50 days. Similar temporal changes were obtained for b-value; the b-value was very high (b 2) at the beginning, and decreased with time, becoming approximately constant (b 1) after 50 days. Patterns of temporal changes in stress drop and b-value were similar to the patterns for frictional strength and earthquake occurrence rate, suggesting that the change in frictional strength due to migrating fluid not only triggered the swarm activity but also affected earthquake and seismicity characteristics. The estimated high Q-1 value, as well as the hypocenter migration, supports the presence of fluid, and its role in the generation and physical characteristics of the swarm.

  11. Determination of the electromagnetic dipole strength distribution in medium-heavy atomic nuclei by means of nuclear resonance fluorescence; Bestimmung der elektromagnetischen Dipolstaerkeverteilung in mittelschweren Atomkernen mittels Kernresonanzfluoreszenz

    Massarczyk, Ralph Jens

    2011-01-17

    During the last hundred years several models were developed to describe the configuration of nuclei. These models have to make predictions, which should be comparable with experiments. As a standard type of experiment the nuclear resonance fluorescence was established. A nucleus is excited by irradiation with photons. By emitting one or more photons the nucleus decays back to the ground state. With this method it is possible to measure energy levels and to determine the strength of their excitation. A continuum of unresolved peaks gives additional strength. The existing setup at the linear electron accelerator ELBE of the Forschungszentrum Dresden-Rossendorf uses bremsstrahlung, produced as a secondary beam in a thin Niobium foil. During the years 2008/09 experiments on the nuclei of {sup 86}Kr and {sup 136}Ba took place there. In this work they will be analyzed. Photon flux and efficiency determination have been done as well as simulations on detector response and non-nuclear scattered background events. For this purpose the GEANT4 package was used. Finally the resulting cross sections were corrected for branching and feeding.

  12. Contemporary problems of physics. Spectral distribution of oscillator strengths in atoms. Sovremennye problemy fiziki. Spektral'nye raspredeleniya sil ostsillyatorov vatomakh

    Fano, U; Kuper, D Zh

    1972-01-01

    A very detailed review is given of the latest achievements in experimental and theoretical research on the absorption spectra of atoms in the energy region from the lowest ionization threshold to several tens of keV (ultraviolet and x-ray region of the spectrum). The materials reviewed form a uniform point of view which facilitates the theoretical analysis of the data and make it possible to demonstrate the connection between various theoretical approaches. The first chapters examine the relationship between oscillator strengths and other atomic characteristics, and offer a brief review of contemporary experimental methods. Then the results of the experiments are carefully compared with calculations in mono-electron and multi-electron approaches, and the computations are analyzed in detail. The last chapters deal with two-electron transitions channel interactions. The book will be useful to senior students and scientists specializing in the area of spectroscopy. 253 references, 28 figures, 6 tables.

  13. A 300 kyr record of aridity and wind strength in southwestern Africa: evidence from grain-size distributions of sediments on Walvis Ridge, SE Atlantic.

    Stuut, J.-B. W.; Prins, M.A.; Schneider, R.S.; Weltje, G.J.; Jansen, J.H.F.; Postma, G.

    2002-01-01

    The terrigenous fraction of sediments recovered from Walvis Ridge, SE Atlantic Ocean, reveals a history of southwestern African climate of the last 300 kyr. End-member modelling of a data set of grain-size distributions (n = 428) results in three end members. The two coarsest end members are

  14. Analysis of (3He, t) charge exchange reactions at 140 AMeV

    Singh, Pardeep; Zegers, R.G.T.; Danielewicz, Pawel; Noji, S.; Kim, B.T.; Sakai, H.

    2014-01-01

    The spin-isospin response in nuclei has been studied widely through ( 3 He, t) and (t, 3 He) charge-exchange reactions wherein a proton (neutron) transforms into a neutron (proton), which in turn changes the isospin, ΔT=1, of the nuclei participating in the reaction, either with or without spin transfer. The Gamow-Teller transitions are used to obtain the weak transition strength in the excitation-energy regions inaccessible through β-decay. The strengths deduced using charge exchange experiments provide stringent tests for nuclear structure calculations and serve as inputs for variety of applications in which weak transition strengths play a role. In this context, we explore here the ( 3 He,t) charge-exchange reaction at 140 MeV/u on 18 O, 26 Mg, 58,60,62, 64 Ni, 90 Zr, 118,120 Sn and 208 Pb targets, within the theoretical framework of distorted wave impulse approximation

  15. Bond strength of masonry

    Pluijm, van der R.; Vermeltfoort, A.Th.

    1992-01-01

    Bond strength is not a well defined property of masonry. Normally three types of bond strength can be distinguished: - tensile bond strength, - shear (and torsional) bond strength, - flexural bond strength. In this contribution the behaviour and strength of masonry in deformation controlled uniaxial

  16. Search for weak M 1 transitions in 48Ca with inelastic proton scattering

    Mathy, M.; Birkhan, J.; Matsubara, H.; von Neumann-Cosel, P.; Pietralla, N.; Ponomarev, V. Yu.; Richter, A.; Tamii, A.

    2017-05-01

    Background: The quenching of spin-isospin modes in nuclei is an important field of research in nuclear structure. It has an impact on astrophysical reaction rates and on fundamental processes like neutrinoless double-β decay. Gamow-Teller (GT) and spin-flip M 1 strengths are quenched. Concerning the latter, the Jπ=1+ resonance in the doubly magic nucleus 48Ca, dominated by a single transition, serves as a reference case. Purpose: The aim of the present work is to search for weak M 1 transitions in 48Ca with a high-resolution (p ,p') experiment at 295 MeV and forward angles including 0∘ and a comparison with results from a similar study using backward-angle electron scattering at low momentum transfers in order to estimate their contribution to the total B (M 1 ) strength in 48Ca. Methods: The spin-M 1 cross sections of individual peaks in the spectra are deduced with a multipole decomposition analysis (MDA) and converted to reduced spin-M 1 transition strengths by using the unit cross-section method. For a comparison with electron-scattering results, corresponding reduced B (M 1 ) transition strengths are extracted following the approach outlined in Birkhan et al. [Phys. Rev. C 93, 041302(R) (2016), 10.1103/PhysRevC.93.041302]. Results: In total, 30 peaks containing a M 1 contribution are found in the excitation energy region 7-13 MeV. The resulting B (M 1 ) strength distribution compares well to the electron-scattering results considering different factors limiting the sensitivity in both experiments and the enhanced importance of mechanisms breaking the proportionality of nuclear cross sections and electromagnetic matrix elements for weak transitions as studied here. The total strength of 1.14(7) μN2 deduced assuming a nonquenched isoscalar part of the (p ,p') cross sections agrees with the (e ,e') result of 1.21(13) μN2. A bin-wise analysis above 10 MeV provides an upper limit of 1.51(17) μN2. Conclusions: The present results confirm the previous electron

  17. Relations between the distribution of signal strength on dynamic MRI imaging and the effect of primary systemic chemotherapy on breast cancer

    Ohta, Koji; Endo, Naoki; Miyanaga, Tamon; Hosokawa, Osamu; Takeda, Takayuki; Kaizaki, Yasuharu

    2009-01-01

    The subjects were 24 patients in whom MRI was performed before and after primary system chemotherapy (PSC). We investigated the pattern of contrast enhancement with respect to treatment responses. We prepared the time-signal intensity in each region of interest (ROI) (small ROI), established by dividing the maximum cut surface of each tumor into 9, and then subdividing them, and examined the distribution of enhancement. We counted small ROIs showing early enhancement and late washout per lesion. Counts were plotted on the longitudinal axis, and the tumor reduction rate on the transverse axis based on data for all tumors. These were also evaluated with respect to subtypes. The complete response (CR) group showed early enhancement and late washout. In addition, the small ROI count was correlated with the tumor reduction rate only in the luminal group. In this group, treatment responses may have more strongly depended on the intra-tumoral vascular density and permeability, because anticancer agent sensitivity was low. (author)

  18. Spin-flip isovector giant resonances from the 90Zr (n,p) 90Y reaction at 200 MeV

    Raywood, K.J.; Spicer, B.M.

    1989-01-01

    Doubly differential cross sections of the reaction 90 Zr(n,p) 90 Y have been measured at 200 MeV for excitations up to 38 MeV in the residual nucleus. An overall resolution of 1.3 MeV was achieved. The spectra show qualitative agreement in shape and magnitude with recent RPA calculations; however all of the calculations underestimate the high excitation region of the spectra. A multipole decomposition of the data has been performed using differential cross sections calculated in the DWIA. An estimate of the Gamow-Teller strength in the reaction is given. The isovector spin-flip dipole giant resonance has been identified and there is also an indication of isovector monopole strength. 39 refs., 16 figs., 1 tab

  19. Direct measurement of the interaction energy between solids and gases--3. Comparison of the calorimetric titration method with the amine titration method for the determination of acid strength distribution of the silica-alumina surface

    Taniguchi, H.; Masuda, T.; Tsutsumi, K.; Takahashi, H.

    1978-07-01

    Comparison of the calorimetric titration method with the amine titration method for the determination of acid strength distribution of the silica-alumina surface was carried out for a catalyst containing 13% by wt alumina and evacuated at 400/sup 0/C at 0.00001 mm Hg for five hours. The heats of adsorption of ammonia on silica-alumina poisoned with Hammett indicators of 8.2 to 3.3 pK/sub a/ were also measured to obtain the relation between the dissociation constant of the acid (pK/sub a/) and the heat of adsorption. At pK/sub a/ values of -5.6 and +3.3, the differential heats of adsorption were 76.1 and 55.1 kj/mole, respectively. The number of acid sites calculated from the heat vs. adsorbed-amount curve was about twice as large as that determined by amine titration. The discrepancy is discussed.

  20. The Strength Compass

    Ledertoug, Mette Marie

    In the Ph.D-project ͚Strengths-based Learning - Children͛s character strengths as a means to their learning potential͛ 750 Danish children have assessed ͚The Strength Compass͛ in order to identify their strengths and to create awareness of strengths. This was followed by a strengths......-based intervention program in order to explore the strengths. Finally different methods to apply the strength in everyday life at school were applied. The paper presentation will show the results for strengths display for children aged 6-16 in different categories: Different age groups: Are the same strengths...... present in both small children and youths? Gender: Do the results show differences between the two genders? Danish as a mother- tongue language: Do the results show any differences in the strengths display when considering different language and cultural backgrounds? Children with Special Needs: Do...

  1. Gogny interactions with tensor terms

    Anguiano, M.; Lallena, A.M.; Bernard, R.N. [Universidad de Granada, Departamento de Fisica Atomica, Molecular y Nuclear, Granada (Spain); Co' , G. [INFN, Lecce (Italy); De Donno, V. [Universita del Salento, Dipartimento di Matematica e Fisica ' ' E. De Giorgi' ' , Lecce (Italy); Grasso, M. [Universite Paris-Sud, Institut de Physique Nucleaire, IN2P3-CNRS, Orsay (France)

    2016-07-15

    We present a perturbative approach to include tensor terms in the Gogny interaction. We do not change the values of the usual parameterisations, with the only exception of the spin-orbit term, and we add tensor terms whose only free parameters are the strengths of the interactions. We identify observables sensitive to the presence of the tensor force in Hartree-Fock, Hartree-Fock-Bogoliubov and random phase approximation calculations. We show the need of including two tensor contributions, at least: a pure tensor term and a tensor-isospin term. We show results relevant for the inclusion of the tensor term for single-particle energies, charge-conserving magnetic excitations and Gamow-Teller excitations. (orig.)

  2. Energy dependence of isovector and isoscalar 1+ excitations in 28Si(p,p/sup '/) between 200 and 400 MeV

    Haeusser, O.; Sawafta, R.; Jeppesen, R.G.

    1988-01-01

    Forward-angle cross sections for 1 + , T = 1 and 1 + , T = 0 states in 28 Si excited by the (p,p') reaction have been measured to determine the energy dependence of important pieces of the effective nucleon-nucleus interaction. The isovector spin-transfer transitions depend on energy as expected from distorted-wave impulse approximation calculations based on the dominant V/sub Σ//sub tau/ part of the Franey-Love interaction. The parts of this interaction responsible for exciting the 9.5 MeV isosca- lar spin-flip transition predict a weaker energy dependence than is observed experimentally. The summed Gamow-Teller strength for isovector transitions below 14.5 MeV is found to be (0.89 +- 0.09) times the result of large-scale shell model calculations

  3. Improved predictions of nuclear data: A continued challenge in astrophysics

    Goriely, S.

    2001-01-01

    Although important effort has been devoted in the last decades to measure reaction cross sections and decay half-lives of interest in astrophysics, most of the nuclear astrophysics applications still require the use of theoretical predictions to estimate experimentally unknown rates. The nuclear ingredients to the reaction or weak interaction models should preferentially be estimated from microscopic or semi-microscopic global predictions based on sound and reliable nuclear models which, in turn, can compete with more phenomenological highly-parametrized models in the reproduction of experimental data. The latest developments made in deriving the nuclear inputs of relevance in astrophysics applications are reviewed. It mainly concerns nuclear structure properties (atomic masses, deformations, radii, etc...), nuclear level densities, nucleon and α-optical potentials, γ-ray and Gamow-Teller strength functions

  4. Report to the DOE Nuclear Data Committee, 1983

    Haight, R.C.; Struble, G.L.

    1983-02-01

    Measurements for nuclear data applicactions are described including branching ratio in 7 Be decay, kerma factor for carbon, photoneutron cross sections, neutron differential scattering cross sections, half-life of 77 Kr, stellar neutron capture rates for 86 87 88 Sr, neutron total cross sections, 142 143 144 Nd neutron capture nucleo-synthesis, half-life of 163 Ho, thermal neutron fission of 236 Np, revised branching ratios in 237 U and 238 Pu decays, and levels of 244 Cm populated by the beta decay of 10-hour 244 Am and 26-minute /sup 244m/Am. Calculations discussed include systematic test of microscopic optical models for nucleon scattering in the range 7 to 60 MeV, Lanczos method shell-model calculations of GamowTeller strength functions, explosive nucleosynthesis and direct radiative capture rates, and calculation of fission cross sections. Evaluated data libraries are briefly discussed

  5. Giant first-forbidden resonances

    Krmpotic, F.; Nakayama, K.; Sao Paulo Univ.; Pio Galeao, A.; Sao Paulo Univ.

    1983-01-01

    Recent experimental data on first-forbidden charge-exchange resonances are discussed in the framework of a schematic model. We also evaluate the screening of the weak coupling constants induced by both the giant resonances and the δ-isobar. It is shown that the last effect does not depend on the multipolarity of the one-particle moment. Due to the same reason, the fraction of the reaction strength pushed up into the δ-resonance region is always the same regardless of the quantum numbers carried by the excitation. Simple expressions are derived for the dependence of the excitation energies of the first-forbidden giant resonances on the mass number and isospin of the target. The model reproduces consistently both the Gamow-Teller and the first-forbidden resonances. (orig.)

  6. Neutrino nuclear responses for double beta decays and astro neutrinos by charge exchange reactions

    Ejiri, Hiroyasu

    2014-09-01

    Neutrino nuclear responses are crucial for neutrino studies in nuclei. Charge exchange reactions (CER) are shown to be used to study charged current neutrino nuclear responses associated with double beta decays(DBD)and astro neutrino interactions. CERs to be used are high energy-resolution (He3 ,t) reactions at RCNP, photonuclear reactions via IAR at NewSUBARU and muon capture reactions at MUSIC RCNP and MLF J-PARC. The Gamow Teller (GT) strengths studied by CERs reproduce the observed 2 neutrino DBD matrix elements. The GT and spin dipole (SD) matrix elements are found to be reduced much due to the nucleon spin isospin correlations and the non-nucleonic (delta isobar) nuclear medium effects. Impacts of the reductions on the DBD matrix elements and astro neutrino interactions are discussed.

  7. Shapes of non-rotating nuclei

    Bengtsson, R.; Krumlinde, J.; Moeller, P.; Nix, J.R.; Zhang, J.

    1983-01-01

    We study nuclear potential-energy surfaces, ground-state masses and shapes calculated by use of a Yukawa-plus-exponential macroscopic model and a folded-Yukawa single-particle potential for 4023 nuclei ranging from 16 O to 279 112. We discuss extensively the transition from spherical to deformed shapes and study the relation between shape changes and the mass corresponding to the ground-state minimum. The calculated values for the ground-state mass and shape show good agreement with experimental data throughout the periodic system, but some discrepancies remain that deserve further study. We also discuss the effect of deformation on Gamow-Teller #betta#-strength functions

  8. Selected aspects in the structure of beta-delayed particle spectra

    Honkanen, J.; Aeystoe, J.; Eskola, K.

    1986-01-01

    Some weak beta-delayed particle emitters in the T z =-3/2, -1, -1/2, +1/2 and +5/2 series are reviewed. Selected features of the delayed particle emission are discussed in terms of experimental delayed particle data and (p,γ), (p,p') and (p,n) reaction data. Experimental beta transition strengths are compared with the existing complete shell-model calculations for the sd-shell nuclei. The effect of the Gamow-Teller giant resonance on the structure of the delayed particle spectra is considered. The correlation between the widths of two decay channels, protons and alpha particles, and the preceeding beta decay is studied in the case of the 40 Sc decay. (orig.)

  9. Beta decay of 46Cr

    Onishi, T K; Gelberg, A; Sakurai, H; Yoneda, K; Aoi, N; Imai, N; Baba, H; Brentano, P von; Fukuda, N; Ichikawa, Y; Ishihara, M; Iwasaki, H; Kameda, D; Kishida, T; Lisetskiy, A F; Ong, H J; Osada, M; Otsuka, T; Suzuki, M K; Ue, K; Utsuno, Y; Watanabe, H

    2006-01-01

    The Gamow-Teller transition of 46 Cr to the N = Z odd-odd nucleus 46 V has been observed for the first time. By means of β-γ coincidence measurements, a γ-ray peak at 993 keV corresponding to the decay of the 1 + 1 state in 46 V was observed. The branching ratio of the decay to this state was found to be b GT = 0.25 ± 0.050. The half-life of 46 Cr was measured to be T 1/2 = 240 ± 140 ms. The transition strength was determined to be B(GT) = 0.64 ± 0.20. This result was compared with theoretical calculations

  10. Isovector excitations in charge independent systems

    Menezes, D.P.

    1986-01-01

    A method for building states with good isospin, from states given by the action of an isovector excitation operator on states of the parent multiplet is developed. This new method is a generalization of Toki's method and is applicable to cases involving any isovector excitation operator and a parent state, which is not a double magic nucleus. Once obtained these states with well defined isospin, it is shown how to do a Tamm-Dancoff calculation for determining the energy levels. The transition matrix elements of an isotensor operator are also calculated. An application of this formalism to the Gamow-Teller transition strength in 90 Zr is studied. In this case, besides the double magic configuration, the 2 particles - 2 holes (Π1g 9/2 ) 2 (υ 2p 1/2 -1 ) 2 configuration is also considered. (author) [pt

  11. Mirror decay of $^{75}$Sr

    Huikari, J; Algora, A; Cederkäll, J; Courtin, S; Dessagne, P; Fraile-Prieto, L M; Franchoo, S; Fynbo, H O U; Huang Wan Xia; Jokinen, A; Knipper, A; Maréchal, F; Miehé, C; Nácher, E; Peräjärvi, K; Poirier, E; Weissman, L; Äystö, J

    2003-01-01

    The beta -decay of /sup 75/Sr to its mirror nucleus /sup 75/Rb was studied at the ISOLDE PSB facility at CERN by means of beta -delayed gamma and proton spectroscopy. The decay Q-value and beta -delayed gamma intensity were measured for the first time. These results, 10.60+or-0.22 MeV and 4.5/sub -0.7//sup +1.9/%, together with accurate measurements of the beta -decay half-life and beta -delayed proton branching ratio yielded the Gamow-Teller strength 0.35+or-0.05 for the mirror transition. Implications of the results on studies of deformation effects and on the path of the rapid proton capture process are discussed. (24 refs).

  12. Statistical Analysis of Data for Timber Strengths

    Sørensen, John Dalsgaard; Hoffmeyer, P.

    Statistical analyses are performed for material strength parameters from approximately 6700 specimens of structural timber. Non-parametric statistical analyses and fits to the following distributions types have been investigated: Normal, Lognormal, 2 parameter Weibull and 3-parameter Weibull...

  13. Spectroscopy of the doubly magic nucleus {sup 100}Sn and its decay

    Hinke, Christoph B.

    2010-07-23

    The nucleus {sup 100}Sn has been the aim of a number of experimental approaches. It is of great interest for various reasons. It is presumably the heaviest particle-stable N=Z nucleus and at the same time doubly magic. Its beta decay is of particular importance because it is expected to be the purest Gamow-Teller decay in the nuclear chart and thus allows to study the question of the missing Gamow-Teller strength/the Gamow-Teller quenching due to core polarisation effects. From the beta-coincident decay spectroscopy of the daughter nucleus {sup 100}In information about the proton-neutron interaction in this region of the nuclear chart can be obtained. Simultaneously with the implantation of the nucleus in the detector setup after production the search for delayed gamma radiation from a predicted isomeric state in {sup 100}Sn could yield first insight into the structure of excited states in this exotic nucleus. This work presents investigation results concerning the spectroscopy of the doubly magic nucleus {sup 100}Sn and its decay. The experiment was performed in March 2008 at the accelerator facilities of the GSI Helmholtz Zentrum Darmstadt. The neutron deficient nucleus was produced in a projectile fragmentation reaction of a {sup 124}Xe primary beam impinging on a Beryllium target with an energy of 1 GeV x A. After a separation from other fragmentation products and a unique identification {sup 100}Sn was stopped in an implantation detector consisting of highly segmented silicon strip detectors for decay spectroscopy. Beside the determination of the half life it was possible to detect the total energy of the emitted particle radiation in the implantation detector as well as the emitted gamma radiation with a surrounding array of Germanium detectors. With a number of approximately 70 successfully observed decays of {sup 100}Sn a half life of T{sub 1/2}=1.16{+-}0.20s was obtained. The beta endpoint energy of the single channel decay yielded a value of E{sub {beta

  14. Spectroscopy of the doubly magic nucleus 100Sn and its decay

    Hinke, Christoph B.

    2010-01-01

    The nucleus 100 Sn has been the aim of a number of experimental approaches. It is of great interest for various reasons. It is presumably the heaviest particle-stable N=Z nucleus and at the same time doubly magic. Its beta decay is of particular importance because it is expected to be the purest Gamow-Teller decay in the nuclear chart and thus allows to study the question of the missing Gamow-Teller strength/the Gamow-Teller quenching due to core polarisation effects. From the beta-coincident decay spectroscopy of the daughter nucleus 100 In information about the proton-neutron interaction in this region of the nuclear chart can be obtained. Simultaneously with the implantation of the nucleus in the detector setup after production the search for delayed gamma radiation from a predicted isomeric state in 100 Sn could yield first insight into the structure of excited states in this exotic nucleus. This work presents investigation results concerning the spectroscopy of the doubly magic nucleus 100 Sn and its decay. The experiment was performed in March 2008 at the accelerator facilities of the GSI Helmholtz Zentrum Darmstadt. The neutron deficient nucleus was produced in a projectile fragmentation reaction of a 124 Xe primary beam impinging on a Beryllium target with an energy of 1 GeV x A. After a separation from other fragmentation products and a unique identification 100 Sn was stopped in an implantation detector consisting of highly segmented silicon strip detectors for decay spectroscopy. Beside the determination of the half life it was possible to detect the total energy of the emitted particle radiation in the implantation detector as well as the emitted gamma radiation with a surrounding array of Germanium detectors. With a number of approximately 70 successfully observed decays of 100 Sn a half life of T 1/2 =1.16±0.20s was obtained. The beta endpoint energy of the single channel decay yielded a value of E β 0 =3.29±0.20 MeV. The resultant Gamow-Teller

  15. The strength compass

    Ledertoug, Mette Marie

    of agreement/disagreement. Also the child/teacher is asked whether the actual strength is important and if he or she has the possibilities to apply the strength in the school. In a PhDproject ‘Strengths-based Learning - Children’s Character Strengths as Means to their Learning Potential’ 750 Danish children......Individual paper presentation: The ‘Strength Compass’. The results of a PhDresearch project among schoolchildren (age 6-16) identifying VIAstrengths concerning age, gender, mother-tongue-langue and possible child psychiatric diagnosis. Strengths-based interventions in schools have a theoretical...... Psychological Publishing Company. ‘The Strength Compass’ is a computer/Ipad based qualitative tool to identify the strengths of a child by a self-survey or a teacher’s survey. It is designed as a visual analogue scale with a statement of the strength in which the child/teacher may declare the degree...

  16. Intermediate nuclear structure for 2ν2β decay of 48Ca studied by (p, n) and (n, p) reactions at 300 MeV

    Sakai, H.; Yako, K.

    2009-01-01

    The two neutrino double beta (2ν2β) decay proceeds through a sequence of Gamow-Teller (GT) transitions, namely from the parent nucleus to the intermediate nucleus and then from the intermediate nucleus to the final daughter nucleus. The nuclear matrix element M 2ν for the 2ν2β - decay thus consists of the 2β - decay matrix elements for the parent nucleus decay and the 2β - decay matrix elements for the intermediate nucleus decay. These 2β - decay matrix elements can be studied experimentally through the (p, n) reaction for the parent nucleus decay and the (n, p) reaction for the intermediate nucleus decay. The 2ν2β-decay nucleus, 4 8C a is studied. The charge exchange (p, n) and (n, p) measurements at 300 MeV were performed using the neutron time-of-flight facility and the (n,p) facility, respectively, at RCNP. The (p, n) measurement on 4 8C a and the (n,p) measurement on 4 8T i provided us, for the first time, reliable B(GT - ) and B(GT + ) strength distributions up to high excitation energy of 30 MeV of the intermediate nucleus 4 8S c. The multipole decomposition analysis was applied to the angular distributions of the cross section spectra to extract the ΔL = 0 components, which are used to deduce B(GT ± ). Figure shows the double differential cross Nb sections for 4 8C a(p, n)4 8S c (left panel) and 4 8T i(n,p)4 8S c (right panel) reactions. The histograms show the results of the multi-pole decomposition analyses. It is very surprising to find sizable amount of ΔL = 0 yield, i.e. B(GT + ) strength in the highly excited energy region (> 10 MeV). The obtained B(GT ± ) distribution in 4 8S c as well as corresponding nuclear matrix elements M 2ν are compared with theoretical shell model calculation. In this talk, new results will be presented and their implication to the nuclear matrix elements for the 2ν2β-decay will be discussed (author)

  17. Structure of the two-neutrino double-β decay matrix elements within perturbation theory

    Štefánik, Dušan; Šimkovic, Fedor; Faessler, Amand

    2015-06-01

    The two-neutrino double-β Gamow-Teller and Fermi transitions are studied within an exactly solvable model, which allows a violation of both spin-isospin SU(4) and isospin SU(2) symmetries, and is expressed with generators of the SO(8) group. It is found that this model reproduces the main features of realistic calculation within the quasiparticle random-phase approximation with isospin symmetry restoration concerning the dependence of the two-neutrino double-β decay matrix elements on isovector and isoscalar particle-particle interactions. By using perturbation theory an explicit dependence of the two-neutrino double-β decay matrix elements on the like-nucleon pairing, particle-particle T =0 and T =1 , and particle-hole proton-neutron interactions is obtained. It is found that double-β decay matrix elements do not depend on the mean field part of Hamiltonian and that they are governed by a weak violation of both SU(2) and SU(4) symmetries by the particle-particle interaction of Hamiltonian. It is pointed out that there is a dominance of two-neutrino double-β decay transition through a single state of intermediate nucleus. The energy position of this state relative to energies of initial and final ground states is given by a combination of strengths of residual interactions. Further, energy-weighted Fermi and Gamow-Teller sum rules connecting Δ Z =2 nuclei are discussed. It is proposed that these sum rules can be used to study the residual interactions of the nuclear Hamiltonian, which are relevant for charge-changing nuclear transitions.

  18. REPETITIVE STRENGTH AMONG STUDENTS OF AGE 14

    Besim Halilaj

    2014-06-01

    Full Text Available The study involved 82 male students of the primary school “Qamil Ilazi” in Kaçanik-Kosovo.Four movement tests, which test the repetitive strength, were conducted: 1. Pull-up, 2. Sit-Up, 3. Back extension, 4. Push-up.The main goal of this study was to verify the actual motor status, respectively the component of the repetitive strength among students of age 14 of masculine gender. In addition to verifying the actual motor status, another objective was to verify the relationship between the variables employed.Basic statistical parameters show a distribution which is not significantly different from the normal distribution, yielded highly correlative values among the repetitive strength tests. Space factorization resulted in extracting two latent squares defined as repetitive strength of arms factor, and repetitive strength of body factor.

  19. 'Bi-modal' isoscalar giant dipole strength in 58Ni

    Nayak, B.K.; Garg, U.; Hedden, M.; Koss, M.; Li, T.; Liu, Y.; Madhusudhana Rao, P.V.; Zhu, S.; Itoh, M.; Sakaguchi, H.; Takeda, H.; Uchida, M.; Yasuda, Y.; Yosoi, M.; Fujimura, H.; Fujiwara, M.; Hara, K.; Kawabata, T.; Akimune, H.; Harakeh, M.N.

    2006-01-01

    The strength distribution of the isoscalar giant dipole resonance (ISGDR) in 58 Ni has been obtained over the energy range 10.5-49.5 MeV via extreme forward angle scattering (including 0 deg.) of 386 MeV α particles. We observe a 'bi-modal' E1 strength distribution for the first time in an A<90 nucleus. The observed ISGDR strength distribution is in reasonable agreement with the predictions of a recent RPA calculation

  20. Strengths-based Learning

    Ledertoug, Mette Marie

    -being. The Ph.D.-project in Strength-based learning took place in a Danish school with 750 pupils age 6-16 and a similar school was functioning as a control group. The presentation will focus on both the aware-explore-apply processes and the practical implications for the schools involved, and on measurable......Strength-based learning - Children͛s Character Strengths as Means to their Learning Potential͛ is a Ph.D.-project aiming to create a strength-based mindset in school settings and at the same time introducing strength-based interventions as specific tools to improve both learning and well...

  1. Measuring Relative Coupling Strength in Circadian Systems.

    Schmal, Christoph; Herzog, Erik D; Herzel, Hanspeter

    2018-02-01

    Modern imaging techniques allow the monitoring of circadian rhythms of single cells. Coupling between these single cellular circadian oscillators can generate coherent periodic signals on the tissue level that subsequently orchestrate physiological outputs. The strength of coupling in such systems of oscillators is often unclear. In particular, effects on coupling strength by varying cell densities, by knockouts, and by inhibitor applications are debated. In this study, we suggest to quantify the relative coupling strength via analyzing period, phase, and amplitude distributions in ensembles of individual circadian oscillators. Simulations of different oscillator networks show that period and phase distributions become narrower with increasing coupling strength. Moreover, amplitudes can increase due to resonance effects. Variances of periods and phases decay monotonically with coupling strength, and can serve therefore as measures of relative coupling strength. Our theoretical predictions are confirmed by studying recently published experimental data from PERIOD2 expression in slices of the suprachiasmatic nucleus during and after the application of tetrodotoxin (TTX). On analyzing the corresponding period, phase, and amplitude distributions, we can show that treatment with TTX can be associated with a reduced coupling strength in the system of coupled oscillators. Analysis of an oscillator network derived directly from the data confirms our conclusions. We suggest that our approach is also applicable to quantify coupling in fibroblast cultures and hepatocyte networks, and for social synchronization of circadian rhythmicity in rodents, flies, and bees.

  2. Give Me Strength.

    维拉

    1996-01-01

    Mort had an absolutely terrible day at the office.Everythingthat could go wrong did go wrong.As he walked home he could beheard muttering strange words to himself:“Oh,give me strength,give me strength.”Mort isn’t asking for the kind of strength thatbuilds strong muscles:he’s asking for the courage or ability to

  3. Factors influencing the creep strength of hot pressed beryllium

    Webster, D.; Crooks, D.D.

    1975-01-01

    The parameters controlling the creep strength of hot pressed beryllium block have been determined. Creep strength was improved by a high initial dislocation density, a coarse grain size, and a low impurity content. The impurities most detrimental to creep strength were found to be aluminum, magnesium, and silicon. A uniform distribution of BeO was found to give creep strength which was inferior to a grain boundary distribution. The creep strength of very high purity, hot isostatically pressed beryllium was found to compare favorably with that of other more commonly used high temperature metals

  4. Electric quadrupole strength in nuclei

    Kirson, M.W.

    1979-01-01

    Isoscalar electric quadrupole strength distributions in nuclei are surveyed, and it is concluded that the strength is shared, in most cases, roughly equally between low-lying transitions and the giant quadrupole state. The same is not true of the isovector case. A simple extension of the schematic model gives a remarkably successul description of the data, and emphasizes the vital importance of the coupling between high-lying and low-lying quadrupole modes. The standadrd simple representation of the giant quadrupole resonance as produced by operating on the nuclear ground state with the quadrupole transition operator is not applicable to the isoscalar case. It is suggested that giant resonances fall into broad classes of similar states, with considerable qualitative differences between the distinct classes. (author)

  5. Imaging Shear Strength Along Subduction Faults

    Bletery, Quentin; Thomas, Amanda M.; Rempel, Alan W.; Hardebeck, Jeanne L.

    2017-11-01

    Subduction faults accumulate stress during long periods of time and release this stress suddenly, during earthquakes, when it reaches a threshold. This threshold, the shear strength, controls the occurrence and magnitude of earthquakes. We consider a 3-D model to derive an analytical expression for how the shear strength depends on the fault geometry, the convergence obliquity, frictional properties, and the stress field orientation. We then use estimates of these different parameters in Japan to infer the distribution of shear strength along a subduction fault. We show that the 2011 Mw9.0 Tohoku earthquake ruptured a fault portion characterized by unusually small variations in static shear strength. This observation is consistent with the hypothesis that large earthquakes preferentially rupture regions with relatively homogeneous shear strength. With increasing constraints on the different parameters at play, our approach could, in the future, help identify favorable locations for large earthquakes.

  6. Imaging shear strength along subduction faults

    Bletery, Quentin; Thomas, Amanda M.; Rempel, Alan W.; Hardebeck, Jeanne L.

    2017-01-01

    Subduction faults accumulate stress during long periods of time and release this stress suddenly, during earthquakes, when it reaches a threshold. This threshold, the shear strength, controls the occurrence and magnitude of earthquakes. We consider a 3-D model to derive an analytical expression for how the shear strength depends on the fault geometry, the convergence obliquity, frictional properties, and the stress field orientation. We then use estimates of these different parameters in Japan to infer the distribution of shear strength along a subduction fault. We show that the 2011 Mw9.0 Tohoku earthquake ruptured a fault portion characterized by unusually small variations in static shear strength. This observation is consistent with the hypothesis that large earthquakes preferentially rupture regions with relatively homogeneous shear strength. With increasing constraints on the different parameters at play, our approach could, in the future, help identify favorable locations for large earthquakes.

  7. Strength evaluation code STEP for brittle materials

    Ishihara, Masahiro; Futakawa, Masatoshi.

    1997-12-01

    In a structural design using brittle materials such as graphite and/or ceramics it is necessary to evaluate the strength of component under complex stress condition. The strength of ceramic materials is said to be influenced by the stress distribution. However, in the structural design criteria simplified stress limits had been adopted without taking account of the strength change with the stress distribution. It is, therefore, important to evaluate the strength of component on the basis of the fracture model for brittle material. Consequently, the strength evaluation program, STEP, on a brittle fracture of ceramic materials based on the competing risk theory had been developed. Two different brittle fracture modes, a surface layer fracture mode dominated by surface flaws and an internal fracture mode by internal flaws, are treated in the STEP code in order to evaluate the strength of brittle fracture. The STEP code uses stress calculation results including complex shape of structures analyzed by the generalized FEM stress analysis code, ABAQUS, so as to be possible to evaluate the strength of brittle fracture for the structures having complicate shapes. This code is, therefore, useful to evaluate the structural integrity of arbitrary shapes of components such as core graphite components in the HTTR, heat exchanger components made of ceramics materials etc. This paper describes the basic equations applying to the STEP code, code system with a combination of the STEP and the ABAQUS codes and the result of the verification analysis. (author)

  8. Anisotropic Concrete Compressive Strength

    Gustenhoff Hansen, Søren; Jørgensen, Henrik Brøner; Hoang, Linh Cao

    2017-01-01

    When the load carrying capacity of existing concrete structures is (re-)assessed it is often based on compressive strength of cores drilled out from the structure. Existing studies show that the core compressive strength is anisotropic; i.e. it depends on whether the cores are drilled parallel...

  9. High strength ferritic alloy

    1977-01-01

    A high strength ferritic steel is specified in which the major alloying elements are chromium and molybdenum, with smaller quantities of niobium, vanadium, silicon, manganese and carbon. The maximum swelling is specified for various irradiation conditions. Rupture strength is also specified. (U.K.)

  10. Photon strength functions

    Bergqvist, I.

    1976-01-01

    Methods for extracting photon strength functions are briefly discussed. We follow the Brink-Axel approach to relate the strength functions to the giant resonances observed in photonuclear work and summarize the available data on the E1, E2 and M1 resonances. Some experimental and theoretical problems are outlined. (author)

  11. Interviewing to Understand Strengths

    Hass, Michael R.

    2018-01-01

    Interviewing clients about their strengths is an important part of developing a complete understanding of their lives and has several advantages over simply focusing on problems and pathology. Prerequisites for skillfully interviewing for strengths include the communication skills that emerge from a stance of not knowing, developing a vocabulary…

  12. Strength functions for fragmented doorway states

    MacDonald, W.M.

    1980-01-01

    Coupling a strongly excited ''doorway state'' to weak ''hallway states'' distributes its strength into micro-resonances seen in differential cross sections taken with very good energy resolution. The distribution of strength is shown to be revealed by reduced widths of the K-matrix rather than by the imaginary part of poles of the S-matrix. Different strength functions (SF) constructed by averaging the K-matrix widths are then investigated to determine their dependences on energy and on parameters related to averages of microscopic matrix elements. A new sum rule on the integrated strength of these SF is derived and used to show that different averaging procedures actually distribute the strength differently. Finally, it is shown that the discontinuous summed strength defines spreading parameters for the doorway state only in strong coupling, where it approximates the idefinite integral of the continuous SF of MacDonald-Mekjian-Kerman-De Toledo Piza. A new method of ''parametric continuation'' is used to relate a discontinuous sliding box-average, or a finite sum, of discrete terms to a continous function

  13. Global model for the lithospheric strength and effective elastic thickness

    Magdala Tesauro; Mikhail Kaban; S. A. P. L. Cloetingh

    2013-01-01

    Global distribution of the strength and effective elastic thickness (Te) of the lithosphere are estimated using physical parameters from recent crustal and lithospheric models. For the Te estimation we apply a new approach, which provides a possibility to take into account variations of Young modulus (E) within the lithosphere. In view of the large uncertainties affecting strength estimates, we evaluate global strength and Te distributions for possible end-member ‘hard’ (HRM) and a ‘soft’ (SR...

  14. Crushing strength of HTGR fuel particles

    Lackey, W.J.; Stinton, D.P.; Davis, L.E.; Beatty, R.L.

    1976-01-01

    The whole-particle crushing strengths of High-Temperature Gas-Cooled Reactor fertile and fissile coated particles were measured and correlated with fabrication procedures. The crushing strength of Biso-coated fertile particles was increased by the following factors: (1) increasing the outer coating thickness by 10 μm increased strengths by 0.3 lb (1.3 N) for annealed particles and by 0.5 lb (2.2 N) for unannealed particles. (2) An 1800 0 C postcoating anneal increased strengths by 1 lb (4.4 N) for particles with thick outer coatings and by 2 lb (8.9 N) for particles having thin coatings. (3) Increasing the inner coating density by 0.1 g/cm 3 increased strength by 0.6 lb (2.7 N). The crushing strength of Triso-coated fissile particles was proportional to the thickness of the SiC coatings, and strength decreased on annealing by about 0.2 lb (0.9 N) when a porous plate was used to distribute the coating gas and by about 1.5 lb (6.7 N) when a conical gas distributor was used. The strengths of fertile and fissile coated particles as well as uncoated kernels appear adequate to allow fuel fabrication without excessive particle damage

  15. Weibull statistic analysis of bending strength in the cemented carbide coatings

    Yi Yong; Shen Baoluo; Qiu Shaoyu; Li Cong

    2003-01-01

    The theoretical basis using Weibull statistics to analyze the strength of coating has been established that the Weibull distribution will be the asymptotic distribution of strength for coating as the volume of coating increase, provided that the local strength of coating is statistic independent, and has been confirmed in the following test for the bending strength of two cemented carbide coatings. The result shows that Weibull statistics can be well used to analyze the strength of two coatings. (authors)

  16. Determination of giant resonance strengths

    Serr, F.E.

    1983-01-01

    Using theoretical strength functions to describe the different giant resonances expected at excitation energies of the order of (60-85)/Asup(1/3) MeV, we calculate the double differential cross sections d 2 sigma/dΩ dE associated with the reactions 208 Pb(α, α') and 90 Zr(α, α') (Esub(α) = 152 MeV). The angular distributions for the giant quadrupole and giant monopole resonances obtained from fits to these spectra, making simple, commonly used assumptions for the peak shapes and background, are compared to the original angular distributions. The differences between them are an indication of some of the uncertainties affecting the giant resonance strengths extracted from hadron inelastic scattering data. Fits to limited angular regions lead to errors of up to 50% in the value of the energy-weighted sum rule, depending on the angles examined. While it seems possible to extract the correct EWSR for the GMR by carrying out the analyses at 0 0 , no single privileged angle seems to exist in the case of the GQR. (orig.)

  17. cap alpha. -transfer reactions /sup 27/Al(/sup 6/Li, d)/sup 31/P, /sup 29/Si(/sup 6/Li, d)/sup 33/S and /sup 31/P(/sup 6/Li, d)/sup 35/Cl at 36 MeV. [Angular distributions, EFR DWBA, spectroscopic strengths

    Eswaran, M A; Gove, H E; Cook, R; Sikora, B [Rochester Univ., NY (USA). Nuclear Structure Research Lab.

    1979-08-13

    The ..cap alpha..-transfer reactions /sup 27/Al(/sup 6/Li,d)/sup 31/P,/sup 29/Si(/sup 6/Li,d) /sup 33/S and /sup 31/P(Li,d)/sup 35/Cl have been studied at a /sup 6/Li energy of 36 MeV. Absolute cross sections and angular distributions have been measured and an exact finite-range distorted-wave Born approximation analysis assuming a direct cluster transfer has been used to extract from the data ..cap alpha..-particle spectroscopic strengths for levels populated in /sup 31/P, /sup 33/S and /sup 35/Cl in three reactions respectively. The results show that in the case of most of the low-lying excited states of /sup 31/P a single value of L of the transferred ..cap alpha..-particle contributes, though a multiplicity of L-values are allowed by angular momentum selection rules. It is also found that the ..cap alpha..-particle spectroscopic strength of the ground state of /sup 31/P is a factor of 2 more than the strengths of the ground states of /sup 33/S and /sup 35/Cl. The ..cap alpha..-spectroscopic strengths of ground states of these, as well as other odd-A s-d shell nuclei, are compared with the presently available shell model calculations.

  18. Strength of Fibrous Composites

    Huang, Zheng-Ming

    2012-01-01

    "Strength of Fibrous Composites" addresses evaluation of the strength of a fibrous composite by using its constituent material properties and its fiber architecture parameters. Having gone through the book, a reader is able to predict the progressive failure behavior and ultimate strength of a fibrous laminate subjected to an arbitrary load condition in terms of the constituent fiber and matrix properties, as well as fiber geometric parameters. The book is useful to researchers and engineers working on design and analysis for composite materials. Dr. Zheng-Ming Huang is a professor at the School of Aerospace Engineering & Applied Mechanics, Tongji University, China. Mr. Ye-Xin Zhou is a PhD candidate at the Department of Mechanical Engineering, the University of Hong Kong, China.

  19. High strength alloys

    Maziasz, Phillip James [Oak Ridge, TN; Shingledecker, John Paul [Knoxville, TN; Santella, Michael Leonard [Knoxville, TN; Schneibel, Joachim Hugo [Knoxville, TN; Sikka, Vinod Kumar [Oak Ridge, TN; Vinegar, Harold J [Bellaire, TX; John, Randy Carl [Houston, TX; Kim, Dong Sub [Sugar Land, TX

    2010-08-31

    High strength metal alloys are described herein. At least one composition of a metal alloy includes chromium, nickel, copper, manganese, silicon, niobium, tungsten and iron. System, methods, and heaters that include the high strength metal alloys are described herein. At least one heater system may include a canister at least partially made from material containing at least one of the metal alloys. At least one system for heating a subterranean formation may include a tubular that is at least partially made from a material containing at least one of the metal alloys.

  20. Hand grip strength

    Frederiksen, Henrik; Gaist, David; Petersen, Hans Christian

    2002-01-01

    in life is a major problem in terms of prevalence, morbidity, functional limitations, and quality of life. It is therefore of interest to find a phenotype reflecting physical functioning which has a relatively high heritability and which can be measured in large samples. Hand grip strength is known......-55%). A powerful design to detect genes associated with a phenotype is obtained using the extreme discordant and concordant sib pairs, of whom 28 and 77 dizygotic twin pairs, respectively, were found in this study. Hence grip strength is a suitable phenotype for identifying genetic variants of importance to mid...

  1. Probe tests microweld strength

    1965-01-01

    Probe is developed to test strength of soldered, brazed or microwelded joints. It consists of a spring which may be adjusted to the desired test pressure by means of a threaded probe head, and an indicator lamp. Device may be used for electronic equipment testing.

  2. Strength and tempo of directional selection in the wild

    Hoekstra, H. E.; Hoekstra, J. M.; Berrigan, D.; Vignieri, S. N.; Hoang, A.; Hill, C. E.; Beerli, P.; Kingsolver, J. G.

    2001-01-01

    Directional selection is a major force driving adaptation and evolutionary change. However, the distribution, strength, and tempo of phenotypic selection acting on quantitative traits in natural populations remain unclear across different study systems. We reviewed the literature (1984–1997) that reported the strength of directional selection as indexed by standardized linear selection gradients (β). We asked how strong are viability and sexual selection, and whether strength of selection is ...

  3. ZERODUR: deterministic approach for strength design

    Hartmann, Peter

    2012-12-01

    There is an increasing request for zero expansion glass ceramic ZERODUR substrates being capable of enduring higher operational static loads or accelerations. The integrity of structures such as optical or mechanical elements for satellites surviving rocket launches, filigree lightweight mirrors, wobbling mirrors, and reticle and wafer stages in microlithography must be guaranteed with low failure probability. Their design requires statistically relevant strength data. The traditional approach using the statistical two-parameter Weibull distribution suffered from two problems. The data sets were too small to obtain distribution parameters with sufficient accuracy and also too small to decide on the validity of the model. This holds especially for the low failure probability levels that are required for reliable applications. Extrapolation to 0.1% failure probability and below led to design strengths so low that higher load applications seemed to be not feasible. New data have been collected with numbers per set large enough to enable tests on the applicability of the three-parameter Weibull distribution. This distribution revealed to provide much better fitting of the data. Moreover it delivers a lower threshold value, which means a minimum value for breakage stress, allowing of removing statistical uncertainty by introducing a deterministic method to calculate design strength. Considerations taken from the theory of fracture mechanics as have been proven to be reliable with proof test qualifications of delicate structures made from brittle materials enable including fatigue due to stress corrosion in a straight forward way. With the formulae derived, either lifetime can be calculated from given stress or allowable stress from minimum required lifetime. The data, distributions, and design strength calculations for several practically relevant surface conditions of ZERODUR are given. The values obtained are significantly higher than those resulting from the two

  4. Assesment of strength and integrity of fuel channels

    2000-01-01

    Detailed analysis to base strength and integrity of fuel channels was necessary for the licensing process. Description of tasks performed in this direction in 1999 is presented: fuel channel independent strength calculations, assessment of present fuel channels state, analysis of dynamic processes during partial group distribution header rupture, structural integrity analysis of fuel channels located next to broke channel

  5. Redox Buffer Strength

    de Levie, Robert

    1999-04-01

    The proper functioning of enzymes in bodily fluids requires that the pH be maintained within rather narrow limits. The first line of defense against large pH fluctuations in such fluids is the passive control provided by the presence of pH buffers. The ability of pH buffers to stabilize the pH is indicated by the buffer value b introduced in 1922 by van Slyke. It is equally important for many enzymes that the redox potential is kept within a narrow range. In that case, stability of the potential is most readily achieved with a redox buffer. In this communication we define the redox buffer strength by analogy with acid-base buffer strength.

  6. Corium crust strength measurements

    Lomperski, S. [Argonne National Laboratory, 9700 S. Cass Avenue, Argonne, IL 60439-4840 (United States)], E-mail: lomperski@anl.gov; Farmer, M.T. [Argonne National Laboratory, 9700 S. Cass Avenue, Argonne, IL 60439-4840 (United States)], E-mail: farmer@anl.gov

    2009-11-15

    Corium strength is of interest in the context of a severe reactor accident in which molten core material melts through the reactor vessel and collects on the containment basemat. Some accident management strategies involve pouring water over the melt to solidify it and halt corium/concrete interactions. The effectiveness of this method could be influenced by the strength of the corium crust at the interface between the melt and coolant. A strong, coherent crust anchored to the containment walls could allow the yet-molten corium to fall away from the crust as it erodes the basemat, thereby thermally decoupling the melt from the coolant and sharply reducing the cooling rate. This paper presents a diverse collection of measurements of the mechanical strength of corium. The data is based on load tests of corium samples in three different contexts: (1) small blocks cut from the debris of the large-scale MACE experiments, (2) 30 cm-diameter, 75 kg ingots produced by SSWICS quench tests, and (3) high temperature crusts loaded during large-scale corium/concrete interaction (CCI) tests. In every case the corium consisted of varying proportions of UO{sub 2}, ZrO{sub 2}, and the constituents of concrete to represent a LWR melt at different stages of a molten core/concrete interaction. The collection of data was used to assess the strength and stability of an anchored, plant-scale crust. The results indicate that such a crust is likely to be too weak to support itself above the melt. It is therefore improbable that an anchored crust configuration could persist and the melt become thermally decoupled from the water layer to restrict cooling and prolong an attack of the reactor cavity concrete.

  7. Strength capability while kneeling.

    Haslegrave, C M; Tracy, M F; Corlett, E N

    1997-12-01

    Work sometimes has to be carried out kneeling, particularly where jobs are performed in confined spaces as is common for miners, aircraft baggage handlers and maintenance workers. In order to assess the risks in performing forceful tasks under such conditions, data is needed on strength capabilities of kneeling subjects. A study was undertaken to measure isometric strength in single-handed exertions for male subjects and to investigate the effects on this of task layout factors (direction of force exertion, reach distance, height of the workpiece and orientation relative to the subject's sagittal plane). The data has been tabulated to show the degree to which strength may be reduced in different situations and analysis of the task factors showed their influence to be complex with direction of exertion and reach distance having the greatest effect. The results also suggest that exertions are weaker when subjects are kneeling on two knees than when kneeling on one knee, although this needs to be confirmed by direct experimental comparison.

  8. Dielectric strength of SiO2 in a CMOS transistor structure

    Soden, J.M.

    1979-01-01

    The distribution of experimental dielectric strengths of SiO 2 gate dielectric in a CMOS transistor structure is shown to be composed of a primary, statistically-normal distribution of high dielectric strength and a secondary distribution spread through the lower dielectric strength region. The dielectric strength was not significantly affected by high level (1 x 10 6 RADS (Si)) gamma radiation or high temperature (200 0 C) stress. The primary distribution breakdowns occurred at topographical edges, mainly at the gate/field oxide interface, and the secondary distribution breakdowns occurred at random locations in the central region of the gate

  9. Strengths only or strengths and relative weaknesses? A preliminary study.

    Rust, Teri; Diessner, Rhett; Reade, Lindsay

    2009-10-01

    Does working on developing character strengths and relative character weaknesses cause lower life satisfaction than working on developing character strengths only? The present study provides a preliminary answer. After 76 college students completed the Values in Action Inventory of Strengths (C. Peterson & M. E. P. Seligman, 2004), the authors randomly assigned them to work on 2 character strengths or on 1 character strength and 1 relative weakness. Combined, these groups showed significant gains on the Satisfaction With Life Scale (E. Diener, R. A. Emmons, R. J. Larsen, & S. Griffin, 1985), compared with a 32-student no-treatment group. However, there was no significant difference in gain scores between the 2-strengths group and the 1-character-strength-and-1-relative-character-weakness group. The authors discuss how focusing on relative character weaknesses (along with strengths) does not diminish-and may assist in increasing-life satisfaction.

  10. Microtensile bond strength of enamel after bleaching.

    Lago, Andrea Dias Neves; Garone-Netto, Narciso

    2013-01-01

    To evaluate the bond strength of a composite resin to the bovine enamel bleached with 35% hydrogen peroxide. It was used an etching-and-rinse adhesive system employed immediately, 7 and 14 days after the bleaching. Twenty bovine teeth were randomly distributed into 4 groups (n = 5), 3 experimental and 1 control. G1: Unbleached + restoration 14 days after storage in artificial saliva (control); G2: Bleached + restoration immediately after bleaching; G3: Bleached + restoration 7 days after bleaching; G4: Bleached + restoration 14 days after bleaching. Their buccal enamel surfaces were flattened, and a 25 mm² (5 × 5 mm) area from each one of these regions was outlined so as to standardize the experimental region. Universal hybrid composite resin Filtek™Z350 was inserted into four layers of 1 mm each and photo-activated. The bond strength was quantitatively evaluated by a microtensile test (1.0 mm/min) 24 h after the restorative procedures. The failure mode was assessed through scanning electron microscopy (SEM). There was a significant reduction in the bond strength of the restored teeth immediately after the bleaching (G2). There were no significant differences in enamel bond strength between groups G1, G3, and G4. There was a predominance of adhesive and mixed (cohesive + adhesive) failure in all groups. The 7-day-period after the end of the bleaching with 35% hydrogen peroxide was enough to achieve the appropriate values of bond strength to the enamel.

  11. Statistical considerations of graphite strength for assessing design allowable stresses

    Ishihara, M.; Mogi, H.; Ioka, I.; Arai, T.; Oku, T.

    1987-01-01

    Several aspects of statistics need to be considered to determine design allowable stresses for graphite structures. These include: 1) Statistical variation of graphite material strength. 2) Uncertainty of calculated stress. 3) Reliability (survival probability) required from operational and safety performance of graphite structures. This paper deals with some statistical considerations of structural graphite for assessing design allowable stress. Firstly, probability distribution functions of tensile and compressive strengths are investigated on experimental Very High Temperature candidated graphites. Normal, logarithmic normal and Weibull distribution functions are compared in terms of coefficient of correlation to measured strength data. This leads to the adaptation of normal distribution function. Then, the relation between factor of safety and fracture probability is discussed on the following items: 1) As the graphite strength is more variable than metalic material's strength, the effect of strength variation to the fracture probability is evaluated. 2) Fracture probability depending on survival probability of 99 ∼ 99.9 (%) with confidence level of 90 ∼ 95 (%) is discussed. 3) As the material properties used in the design analysis are usually the mean values of their variation, the additional effect of these variations on the fracture probability is discussed. Finally, the way to assure the minimum ultimate strength with required survival probability with confidence level is discussed in view of statistical treatment of the strength data from varying sample numbers in a material acceptance test. (author)

  12. Strength Training: For Overall Fitness

    Healthy Lifestyle Fitness Strength training is an important part of an overall fitness program. Here's what strength training can do for ... is a key component of overall health and fitness for everyone. Lean muscle mass naturally diminishes with ...

  13. Statistical Analysis of Data for Timber Strengths

    Sørensen, John Dalsgaard

    2003-01-01

    Statistical analyses are performed for material strength parameters from a large number of specimens of structural timber. Non-parametric statistical analysis and fits have been investigated for the following distribution types: Normal, Lognormal, 2 parameter Weibull and 3-parameter Weibull...... fits to the data available, especially if tail fits are used whereas the Log Normal distribution generally gives a poor fit and larger coefficients of variation, especially if tail fits are used. The implications on the reliability level of typical structural elements and on partial safety factors...... for timber are investigated....

  14. Gaussian discriminating strength

    Rigovacca, L.; Farace, A.; De Pasquale, A.; Giovannetti, V.

    2015-10-01

    We present a quantifier of nonclassical correlations for bipartite, multimode Gaussian states. It is derived from the Discriminating Strength measure, introduced for finite dimensional systems in Farace et al., [New J. Phys. 16, 073010 (2014), 10.1088/1367-2630/16/7/073010]. As the latter the new measure exploits the quantum Chernoff bound to gauge the susceptibility of the composite system with respect to local perturbations induced by unitary gates extracted from a suitable set of allowed transformations (the latter being identified by posing some general requirements). Closed expressions are provided for the case of two-mode Gaussian states obtained by squeezing or by linearly mixing via a beam splitter a factorized two-mode thermal state. For these density matrices, we study how nonclassical correlations are related with the entanglement present in the system and with its total photon number.

  15. Finite Element Simulation of Diametral Strength Test of Hydroxyapatite

    Ozturk, Fahrettin; Toros, Serkan; Evis, Zafer

    2011-01-01

    In this study, the diametral strength test of sintered hydroxyapatite was simulated by the finite element software, ABAQUS/Standard. Stress distributions on diametral test sample were determined. The effect of sintering temperature on stress distribution of hydroxyapatite was studied. It was concluded that high sintering temperatures did not reduce the stress on hydroxyapatite. It had a negative effect on stress distribution of hydroxyapatite after 1300 deg. C. In addition to the porosity, other factors (sintering temperature, presence of phases and the degree of crystallinity) affect the diametral strength of the hydroxyapatite.

  16. Transition-strength fluctuations and the onset of chaotic motion

    Alhassid, Y.; Levine, R.D.

    1986-01-01

    The maximum-entropy formalism is used to characterize the fluctuations in transition strengths for a bound quantum-mechanical system. In the chaotic limit only one, ever present, sum rule is required as a constraint. The resulting distribution is that of Porter and Thomas, which can also be derived from random-matrix theory. For nonchaotic systems the distribution of transition strengths has a lower entropy. A possible additional constraint, operative during the onset of chaos, is proposed. The distribution of maximal entropy subject to both constraints accords with computed intensities in a system of two degrees of freedom

  17. Compressive and flexural strength of high strength phase change mortar

    Qiao, Qingyao; Fang, Changle

    2018-04-01

    High-strength cement produces a lot of hydration heat when hydrated, it will usually lead to thermal cracks. Phase change materials (PCM) are very potential thermal storage materials. Utilize PCM can help reduce the hydration heat. Research shows that apply suitable amount of PCM has a significant effect on improving the compressive strength of cement mortar, and can also improve the flexural strength to some extent.

  18. Institutional Strength in Depth

    Weightman, M.

    2016-01-01

    Much work has been undertaken in order to identify, learn and implement the lessons from the TEPCO Fukushima Daiichi nuclear accident. These have mainly targeted on engineering or operational lessons. Less attention has been paid to the institutional lessons, although there have been some measures to improve individual peer reviews, particularly by the World Association of Nuclear Operators, and the authoritative IAEA report published in 2015 brought forward several important lessons for regulators and advocated a system approach. The report noted that one of the contributing factors the accident was the tendency of stakeholders not to challenge. Additionally, it reported deficiencies in the regulatory authority and system. Earlier, the root cause of the accident was identified by a Japanese independent parliamentary report as being cultural and institutional. The sum total of the institutions, the safety system, was ineffective. While it is important to address the many technical and operational lessons these may not necessary address this more fundamental lesson, and may not serve to provide robust defences against human or institutional failings over a wide variety of possible events and combinations. The overall lesson is that we can have rigorous and comprehensive safety standards and other tools in place to deliver high levels of safety, but ultimately what is important is the ability of the nuclear safety system to ensure that the relevant institutions diligently and effectively apply those standards and tools — to be robust and resilient. This has led to the consideration of applying the principles of the strength in depth philosophy to a nuclear safety system as a way of providing a framework for developing, assessing, reviewing and improving the system. At an IAEA conference in October 2013, a model was presented for a robust national nuclear safety system based on strength in depth philosophy. The model highlighted three main layers: industry, the

  19. Reliability formulation for the strength and fire endurance of glued-laminated beams

    D. A. Bender

    A model was developed for predicting the statistical distribution of glued-laminated beam strength and stiffness under normal temperature conditions using available long span modulus of elasticity data, end joint tension test data, and tensile strength data for laminating-grade lumber. The beam strength model predictions compared favorably with test data for glued-...

  20. Experimental study of radiative pion capture on 13C, 20Ne, 90Zr, 19F and 12C

    Martoff, C.J.

    1980-11-01

    Photon spectra for 50 13 C, 19 F, 20 Ne, and 90 Zr. The e + e - pair spectrometer system used has resolution 850 keV fwhm and photon detection efficiency 5 x 10 -6 . The total radiative capture branching ratios measured are 13 C (1.66 +- 0.25)%, 19 F (2.40 +- 0.48)%, 20 Ne (1.60 +- 0.24)%, and 90 Zr (2.1 +- 0.5)%. The partial radiative capture branching ratios to four bound states and two resonances in 20 F, and two bound states and three resonances in 13 B have also been measured. The branching ratio for 13 C(π - ,γ) 13 B g.s. is (6.1 +- 1.2) x 10 -4 . Comparison of this result with the beta decay rate of 13 B shows that (84 +- 16)% of the pion capture amplitude is accounted for by the Gamow-Teller matrix element. Further analysis suggests that much of the remaining strength is E2. The measured branching ratios to resonant states in 13 C(π - ,γ) 13 B are shown to be in agreement with detailed shell model calculations. The total single-particle strength in these transitions is shown to be approximately half as large as that of the T = 3/2 part of the E1 photoresonance (the Giant Dipole Resonance) in 13 C. The branching ratio for 20 Ne(π - ,γ) 20 F (T = 1, J/sup π/ = 1 + , E/sub x/ = 1.06 MeV) is 0.91 +- 0.52).10 -4 . Comparison with the electroexcitation of the analog giant M1 state in 20 Ne (11.24 MeV) shows that the M1 transition amplitude is less than (46 +- 14)% Gamow-Teller. This result is in agreement with detailed shell model calculations of the M1 transition. The photon spectrum for radiative pion capture from flight (reaction 12 C(π + T = 44 MeV, γ at 90 0 )) has been measured. 13 figures, 12 tables

  1. The local strength of microscopic alumina reinforcements

    Žagar, Goran; Pejchal, Václav; Mueller, Martin G.; Rossoll, Andreas; Cantoni, Marco; Mortensen, Andreas

    2015-01-01

    We measure, using an adaptation of a method designed for ceramic ball bearings, the local strength of a brittle second phase that serves to reinforce a metal. The method uses focused ion beam milling and a nanoindentation device, and is free of artifacts commonly present in micromachined specimens. It is demonstrated on Nextel 610™ nanocrystalline alumina fibers embedded in an aluminum matrix composite. Results reveal a size effect that does not follow, across size scales, usual Weibull statistics: the fiber strength distribution differs between measurements at the microscale and macroscopic tensile testing. This implies that, in micromechanical analysis of multiphase materials, highly localized events such as the propagation of internal damage require input data that must be measured at the same, local, microscale as the event; the present work opens a path to this end.

  2. Effective collision strengths of quasar ultraviolet emission lines

    Osterbrock, D.E.; Wallace, R.K.

    1977-01-01

    The best available published collision strengths for excitation of permitted and semiforbidden emission lines of abundant ions observed or expected in quasars have been collected and averaged over Maxwellian velocity distributions. For a few ions for which calculations are not available, extrapolation along isoelectronic sequences or in principal quantum number n was used to estimate values. These collision strengths were used to correct differentially published photoionization models of quasars, and the corrected models compared with published observational data

  3. Magnetic dipole strength in 128Xe and 134Xe in the spin-flip resonance region

    Massarczyk, R.; Rusev, G.; Schwengner, R.; Dönau, F.; Bhatia, C.; Gooden, M. Â. E.; Kelley, J. Â. H.; Tonchev, A. Â. P.; Tornow, W.

    2014-11-01

    The magnetic dipole strength in the energy region of the spin-flip resonance is investigated in 128Xe and 134Xe using quasimonoenergetic and linearly polarized γ -ray beams at the High-Intensity γ -Ray Source facility in Durham, North Carolina, USA. Absorption cross sections were deduced for the magnetic and electric and dipole strength distributions separately for various intervals of excitation energy, including the strength of states in the unresolved quasicontinuum. The magnetic dipole strength distributions show structures resembling a resonance in the spin-flip region around an excitation energy of 8 MeV. The electric dipole strength distributions obtained from the present experiments are in agreement with the ones deduced from an earlier experiment using broad-band bremsstrahlung instead of a quasimonoenergetic beam. The experimental magnetic and electric dipole strength distributions are compared with phenomenological approximations and with predictions of a quasiparticle random phase approximation in a deformed basis.

  4. Microtensile bond strength of enamel after bleaching

    Andréa Dias Neves Lago

    2013-01-01

    Full Text Available Objective: To evaluate the bond strength of a composite resin to the bovine enamel bleached with 35% hydrogen peroxide. It was used an etching-and-rinse adhesive system employed immediately, 7 and 14 days after the bleaching. Materials and Methods: Twenty bovine teeth were randomly distributed into 4 groups (n = 5, 3 experimental and 1 control. G1: Unbleached + restoration 14 days after storage in artificial saliva (control; G2: Bleached + restoration immediately after bleaching; G3: Bleached + restoration 7 days after bleaching; G4: Bleached + restoration 14 days after bleaching. Their buccal enamel surfaces were flattened, and a 25 mm² (5 × 5 mm area from each one of these regions was outlined so as to standardize the experimental region. Universal hybrid composite resin Filtek™Z350 was inserted into four layers of 1 mm each and photo-activated. The bond strength was quantitatively evaluated by a microtensile test (1.0 mm/min 24 h after the restorative procedures. The failure mode was assessed through scanning electron microscopy (SEM. Results: There was a significant reduction in the bond strength of the restored teeth immediately after the bleaching (G2. There were no significant differences in enamel bond strength between groups G1, G3, and G4. There was a predominance of adhesive and mixed (cohesive + adhesive failure in all groups. Conclusion: The 7-day-period after the end of the bleaching with 35% hydrogen peroxide was enough to achieve the appropriate values of bond strength to the enamel.

  5. Loading Conditions and Longitudinal Strength

    Sørensen, Herman

    1995-01-01

    Methods for the calculation of the lightweight of the ship.Loading conditions satisfying draught, trim and intact stability requirements and analysis of the corresponding stillwater longitudinal strength.......Methods for the calculation of the lightweight of the ship.Loading conditions satisfying draught, trim and intact stability requirements and analysis of the corresponding stillwater longitudinal strength....

  6. Oscillator strengths for neutral technetium

    Garstang, R.H.

    1981-01-01

    Oscillator strengths have been calculated for most of the spectral lines of TcI which are of interest in the study of stars of spectral type S. Oscillator strengths have been computed for the corresponding transitions in MnI as a partial check of the technetium calculations

  7. Temperature dependence of pair correlations in nuclei in the iron region

    Langanke, K.; Dean, D.J.; Oak Ridge National Lab., TN; Radha, P.B.; Koonin, S.E.

    1996-01-01

    We use the shell-model Monte Carlo approach to study thermal properties and pair correlations in 54,56,58 Fe and in 56 Cr. The calculations are performed with the modified Kuo-Brown interaction in the complete 1p0f model space. We find generally that the proton-proton and neutron-neutron J=0 pairing correlations, which dominate the ground-state properties of even-even nuclei, vanish at temperatures around 1 MeV. This pairing phase transition is accompanied by a rapid increase in the moment of inertia and a partial unquenching of the M1 strength. We find that the M1 strength totally unquenches at higher temperatures, related to the vanishing of isoscalar proton-neutron correlations, which persist to higher temperatures than the pairing between like nucleons. The Gamow-Teller strength is also correlated to the isoscalar proton-neutron pairing and hence also unquenches at a temperature larger than that of the pairing phase transition. (orig.)

  8. STRENGTH OF NANOMODIFIED HIGH-STRENGTH LIGHTWEIGHT CONCRETES

    NOZEMTСEV Alexandr Sergeevich

    2013-02-01

    Full Text Available The paper presents the results of research aimed at development of nanomodified high-strength lightweight concrete for construction. The developed concretes are of low average density and high ultimate compressive strength. It is shown that to produce this type of concrete one need to use hollow glass and aluminosilicate microspheres. To increase the durability of adhesion between cement stone and fine filler the authors offer to use complex nanodimensinal modifier based on iron hydroxide sol and silica sol as a surface nanomodifier for hollow microspheres. It is hypothesized that the proposed modifier has complex effect on the activity of the cement hydration and, at the same time increases bond strength between filler and cement-mineral matrix. The compositions for energy-efficient nanomodified high-strength lightweight concrete which density is 1300…1500 kg/m³ and compressive strength is 40…65 MPa have been developed. The approaches to the design of high-strength lightweight concrete with density of less than 2000 kg/m³ are formulated. It is noted that the proposed concretes possess dense homogeneous structure and moderate mobility. Thus, they allow processing by vibration during production. The economic and practical implications for realization of high-strength lightweight concrete in industrial production have been justified.

  9. (p,t) strengths in the Ga isotopes

    Rotbard, G.; Vergnes, M.; Berrier-Ronsin, G.; Vernotte, J.; Tamisier, R.

    1984-01-01

    The (p,t) reaction on the two stable Ga isotopes has been performed at 25 MeV, with 11 keV energy resolution. Levels up to 3.5 MeV in 67 Ga, 4.3 MeV in 69 Ga were measured. Differences observed in comparing the distribution of the L=2 (p,t) strength with the distribution of the B(E2) strength may be explained by a mixed character of the 7/2 2 - level wave function. The distribution of the L=0 strength indicates that the striking change in ground-state structure shown between N=40 and 42 already begins, although weakly, between N=38 and 40

  10. Zhengzhou Distribution Research and Countermeasures

    Cao Wujun

    2017-01-01

    Full Text Available With the acceleration of urbanization process in China, the city has become an increasingly important part of the logistics. This paper analyzes the current development in Zhengzhou logistics and distribution, and use the SWOT analysis model to analyze the Zhengzhou logistics and distribution strengths, weaknesses, opportunities and challenges presented in Zhengzhou distribution tertiary network architecture, and finally summarized the Zhengzhou logistics countermeasures and suggestions distribution.

  11. Dipole and spin-dipole strength distributions in isotopes

    Necla Cakmak

    2018-01-03

    Jan 3, 2018 ... isotopes. NECLA CAKMAK1, SADIYE CAKMAK2, CEVAD SELAM3 and SERDAR UNLU4,∗. 1Department of Physics, Karabuk University, Karabuk, Turkey. 2Department of Physics ... and 14 and the giant resonances in the energy region of. 19–27 MeV were ... even–even nuclei [21]. The restoration of this ...

  12. Geckolike high shear strength by carbon nanotube fiber adhesives

    Maeno, Y.; Nakayama, Y.

    2009-01-01

    Carbon nanotube adhesives can adhere strongly to surfaces as a gecko does. The number of carbon nanotube layers is an important determinant of the contact area for adhesion. Balancing the catalyst ratio and buffer layer used for chemical vapor deposition processing controls the number of carbon nanotube layers and their distribution. The features of carbon nanotubes determine the shear strength of adhesion. Carbon nanotubes with a broad distribution of layers exhibit enhanced shear strength with equivalent adhesive capability to that of a natural Tokay Gecko (Gekko gecko)

  13. Ultimate Strength of Ship Hulls under Torsion

    Paik, Jeom Kee; Thayamballi, Anil K.; Pedersen, Preben Terndrup

    2001-01-01

    For a ship hull with large deck openings such as container vessels and some large bulk carriers, the analysis of warping stresses and hatch opening deformations is an essential part of ship structural analyses. It is thus of importance to better understand the ultimate torsional strength characte......For a ship hull with large deck openings such as container vessels and some large bulk carriers, the analysis of warping stresses and hatch opening deformations is an essential part of ship structural analyses. It is thus of importance to better understand the ultimate torsional strength...... characteristics of ships with large hatch openings. The primary aim of the present study is to investigate the ultimate strength characteristics of ship hulls with large hatch openings under torsion. Axial (warping) as well as shear stresses are normally developed for thin-walled beams with open cross sections...... subjected to torsion. A procedure for calculating these stresses is briefly described. As an illustrative example, the distribution and magnitude of warping and shear stresses for a typical container vessel hull cross section under unit torsion is calculated by the procedure. By theoretical and numerical...

  14. Study on strength of thick reinforced concrete slab with opening - Part 2: Evaluation of the test results

    Hirai, T.; Itoh, M.; Takei, K.; Kanazu, T.; Abe, Y.; Takahashi, T.; Hayashi, N.; Sasaki, N.

    1993-01-01

    In comparing the strength of the partial models obtained from the test and the strength calculated by the various formulas for short span cantilevers based on recent research, it was found that the strength of the partial models coincided well with the calculated bending strength. It was confirmed that bending failure also preceded in the overall model from the tests. However various strengths such as the cracking strength and the yielding strength of rebars were larger, and displacements and strains in various parts were smaller than those in the partial models. It was attributed to the effects of circumferential distribution of the load. A convenient method was proposed for evaluation of the strength of the overall model. In this method, the overall model is divided into corbels, and the strength of the model is calculated as the sum of these corbels' strength. This method estimated the strength conveniently and conservatively. (author)

  15. Reliability analysis of steel-containment strength

    Greimann, L.G.; Fanous, F.; Wold-Tinsae, A.; Ketalaar, D.; Lin, T.; Bluhm, D.

    1982-06-01

    A best estimate and uncertainty assessment of the resistance of the St. Lucie, Cherokee, Perry, WPPSS and Browns Ferry containment vessels was performed. The Monte Carlo simulation technique and second moment approach were compared as a means of calculating the probability distribution of the containment resistance. A uniform static internal pressure was used and strain ductility was taken as the failure criterion. Approximate methods were developed and calibrated with finite element analysis. Both approximate and finite element analyses were performed on the axisymmetric containment structure. An uncertainty assessment of the containment strength was then performed by the second moment reliability method. Based upon the approximate methods, the cumulative distribution for the resistance of each of the five containments (shell modes only) is presented

  16. Rock strength under explosive loading

    Rimer, N.; Proffer, W.

    1993-01-01

    This presentation emphasizes the importance of a detailed description of the nonlinear deviatoric (strength) response of the surrounding rock in the numerical simulation of underground nuclear explosion phenomenology to the late times needed for test ban monitoring applications. We will show how numerical simulations which match ground motion measurements in volcanic tuffs and in granite use the strength values obtained from laboratory measurements on small core samples of these rocks but also require much lower strength values after the ground motion has interacted with the rock. The underlying physical mechanisms for the implied strength reduction are not yet well understood, and in fact may depend on the particular rock type. However, constitutive models for shock damage and/or effective stress have been used successfully at S-Cubed in both the Geophysics Program (primarily for DARPA) and the Containment Support Program (for DNA) to simulate late time ground motions measured at NTS in many different rock types

  17. Strength Training and Your Child

    ... in organized sports or activities such as baseball, soccer, or gymnastics usually can safely to start strength ... as biking and running, adequate hydration, and healthy nutrition. Reviewed by: Mary L. Gavin, MD Date reviewed: ...

  18. The nuclear spin response to intermediate energy protons and deuterons at low momentum transfer

    Baker, F.T.; Djalali, C.; Glashausser, C.; Lenske, H.; Love, W.G.; Tomasi-Gustafsson, E.; Wambach, J.

    1997-01-01

    Measurements of polarization transfer in the inelastic scattering of intermediate energy protons and deuterons have yielded a wealth of data on the spin response of nuclei. This work complements the well-known studies of Gamow-Teller strength in charge-exchange reactions. The emphasis here is on a consistent determination of the S=1, T=0 response, practical only with deuterons, and on the proper separation of S=0 and S=1 strength in proton spectra for appropriate comparison with sum rules. We concentrate on two nuclei, 40 Ca and 12 C, at momentum transfers below about 1 fm -1 and on excitations up to about 50 MeV. The continuum second random phase approximation provides the primary theoretical tool for calculating and interpreting the response in terms of properties of the nucleon-nucleon force inside the nuclear medium. The reaction mechanism is described by the DWIA, applied here to continuum proton scattering almost as rigorously as it is usually applied to low energy excitations. A new DWIA formalism for the description of spin observables in deuteron scattering is used. Comparison of the proton and deuteron data with each other and with RPA/DWIA calculations yields interesting insights into the current state of understanding of collectivity and the nuclear spin response. (orig.)

  19. Measurement and microscopic analysis of the 11B(p,p') reaction at Ep = 150 MeV. Part I: Inelastic scattering

    Hannen, V.M.; Van den Berg, A.M.; Bieber, R.K.; Harakeh, M.N.; De Huu, M.A.; Kruesemann, B.A.M.; Van der Werf, S.Y.; Woertche, H.J.; Amos, K.; Deb, P.K.; Ellinghaus, F.; Frekers, D.; Rakers, S.; Schmidt, R.; Hagemann, M.

    2001-01-01

    Cross sections and analyzing powers for the 11 B(p.p') reaction have been measured using a 150 MeV polarized proton beam from the AGOR cyclotron at KVI. For the stronger inelastic transitions, also spin-flip probabilities have been extracted. A fully microscopic distorted-wave analysis of the elastic and inelastic data has been made, using density-dependent effective interactions and input from shell-model calculations in a complete (0+2) ℎω model space for normal parity transitions and in a 1 ℎω model space for non-normal parity transitions. With the help of these model calculations spin-isovector M1 strengths for the negative-parity states at excitation energies of 2.125 MeV (J π = 1/2 - ), 4.445 MeV (J π 5/2 - ), 5.020 MeV (J π = 3/2 - ) and 8.920 MeV (J π 5/2 - ) have been extracted and compared to known Gamow-Teller strengths for the analog transitions to 11 C

  20. Is nucleon deformed?

    Abbas, Afsar

    1992-01-01

    The surprising answer to this question Is nucleon deformed? is : Yes. The evidence comes from a study of the quark model of the single nucleon and when it is found in a nucleus. It turns out that many of the long standing problems of the Naive Quark Model are taken care of if the nucleon is assumed to be deformed. Only one value of the parameter P D ∼1/4 (which specifies deformation) fits g A (the axial vector coupling constant) for all the semileptonic decay of baryons, the F/D ratio, the pion-nucleon-delta coupling constant fsub(πNΔ), the double delta coupling constant 1 fsub(πΔΔ), the Ml transition moment μΔN and g 1 p the spin structure function of proton 2 . All this gives strong hint that both neutron and proton are deformed. It is important to look for further signatures of this deformation. When this deformed nucleon finds itself in a nuclear medium its deformation decreases. So much that in a heavy nucleus the nucleons are actually spherical. We look into the Gamow-Teller strengths, magnetic moments and magnetic transition strengths in nuclei to study this property. (author). 15 refs

  1. Characteristics of structural loess strength and preliminary framework for joint strength formula

    Rong-jian Li; Jun-ding Liu; Rui Yan; Wen Zheng; Sheng-jun Shao

    2014-01-01

    The strength of structural loess consists of the shear strength and tensile strength. In this study, the stress path, the failure envelope of principal stress (Kf line), and the strength failure envelope of structurally intact loess and remolded loess were analyzed through three kinds of tests: the tensile strength test, the uniaxial compressive strength test, and the conventional triaxial shear strength test. Then, in order to describe the tensile strength and shear strength of structural lo...

  2. Observations in the statistical analysis of NBG-18 nuclear graphite strength tests

    Hindley, Michael P.; Mitchell, Mark N.; Blaine, Deborah C.; Groenwold, Albert A.

    2012-01-01

    Highlights: ► Statistical analysis of NBG-18 nuclear graphite strength test. ► A Weibull distribution and normal distribution is tested for all data. ► A Bimodal distribution in the CS data is confirmed. ► The CS data set has the lowest variance. ► A Combined data set is formed and has Weibull distribution. - Abstract: The purpose of this paper is to report on the selection of a statistical distribution chosen to represent the experimental material strength of NBG-18 nuclear graphite. Three large sets of samples were tested during the material characterisation of the Pebble Bed Modular Reactor and Core Structure Ceramics materials. These sets of samples are tensile strength, flexural strength and compressive strength (CS) measurements. A relevant statistical fit is determined and the goodness of fit is also evaluated for each data set. The data sets are also normalised for ease of comparison, and combined into one representative data set. The validity of this approach is demonstrated. A second failure mode distribution is found on the CS test data. Identifying this failure mode supports the similar observations made in the past. The success of fitting the Weibull distribution through the normalised data sets allows us to improve the basis for the estimates of the variability. This could also imply that the variability on the graphite strength for the different strength measures is based on the same flaw distribution and thus a property of the material.

  3. Finding significantly connected voxels based on histograms of connection strengths

    Kasenburg, Niklas; Pedersen, Morten Vester; Darkner, Sune

    2016-01-01

    We explore a new approach for structural connectivity based segmentations of subcortical brain regions. Connectivity based segmentations are usually based on fibre connections from a seed region to predefined target regions. We present a method for finding significantly connected voxels based...... on the distribution of connection strengths. Paths from seed voxels to all voxels in a target region are obtained from a shortest-path tractography. For each seed voxel we approximate the distribution with a histogram of path scores. We hypothesise that the majority of estimated connections are false-positives...... and that their connection strength is distributed differently from true-positive connections. Therefore, an empirical null-distribution is defined for each target region as the average normalized histogram over all voxels in the seed region. Single histograms are then tested against the corresponding null...

  4. Determination of Strength for Reliability Analysis of Multilayer Ceramic Capacitors

    Breder, K.; Bridge, R.J.; Kirkland, T.P.; Riester, L.; Wereszczak, A.A.

    1999-01-01

    A Nanoindenter TM equipped with a Vickers indenter was used to measure fracture toughness of Multilayer Capacitors (MLCs) and BaTiO 3 blanks. Strength of blanks of 6.3 x 4.7 x 1.1 mm 3 was measured by performing three-point flexure using a 4 mm support span. The size of the strength limiting pores in the flexure tests was compared to pore sizes measured on polished MLC cross sections, and it was found that much larger pores were present in the 3-point flexure specimens. Strength distributions for the MLCs were generated using the measured fracture toughness values, assuming the measured pores or second phase inclusions were strength limiting

  5. Nucleon charge-exchange reactions at intermediate energy

    Alford, W.P.; Spicer, B.M.

    1997-01-01

    An historical review of the development of ideas pertaining to Gamow-Teller giant resonances is given, and a description of the emergence of techniques for the study of charge exchange reactions - particularly the technical advances which yielded the recent volume of new date. The present status of charge exchange reactions is reviewed and assessed. Evidence is presented from the 14 C(p,n) reaction for the dominance of the spin-isospin component of the nucleon-nucleon interaction in intermediate energy reactions. In (p,n) reactions the Gamow-Teller giant resonance dominates the spectra, with higher multipoles contributing. By contrast, in (n,p) reactions in the heavier nuclei, the Gamow-Teller transitions are substantially Pauli-blocked and the spin dipole resonance dominates, with contributions from higher multipoles. Discussions of the multipole decomposition process, used to obtain from the data the contributions of the different multipoles, and the contributions of the multipoles, are given

  6. Where is the Scissors Mode Strength in Odd-Mass Nuclei?

    Enders, J.; Huxel, N.; von Neumann-Cosel, P.; Richter, A.

    1997-01-01

    It is demonstrated by a fluctuation analysis based on the assumption of a Wigner distribution for the nuclear level spacings and of a Porter-Thomas distribution for the transition strengths that significant parts of the dipole strength excited in photon scattering experiments in heavy, deformed odd-mass nuclei are hidden in the background of the experimental spectra. With this additional strength, the heretofore claimed severe reduction of the B(M1) scissors mode strength in odd-mass nuclei compared to the one in neighboring even-even nuclei disappears. copyright 1997 The American Physical Society

  7. Microstructure and bonding strength of Ni-based alloy coating

    LIU Qing

    2006-05-01

    Full Text Available A Ni-Cr-B-Si coating technique was developed and successfully applied on austenite grey iron substrate in a conventional resistance furnace under graphite powder protection. The microstructure, phase distribution, chemical composition profile and microhardness along the coating layer depth were investigated. Shear strength of the coating was also tested. Microanalysis shows that the coating is consist of γ-Ni solution and γ-Ni+Ni3B lamellar eutectic, as well as small amount of Cr5B3 particles. Diffusion induced metallurgical bonding occurs at the coating/substrate interfaces, and the higher the temperature, the more sufficient elements diffused, the broader interfusion region and the larger bonding strength, but it has an optimum value. And the bonding strength at the interface can be enable to reach 250-270 MPa, which is nearly the same as that of processed by flame spray. The microhardness along the coating layer depth shows a gradient distribution manner.

  8. Heavyweight cement concrete with high stability of strength parameters

    Kudyakov, Konstantin; Nevsky, Andrey; Danke, Ilia; Kudyakov, Aleksandr; Kudyakov, Vitaly

    2016-01-01

    The present paper establishes regularities of basalt fibers distribution in movable cement concrete mixes under different conditions of their preparation and their selective introduction into mixer during the mixing process. The optimum content of basalt fibers was defined as 0.5% of the cement weight, which provides a uniform distribution of fibers in the concrete volume. It allows increasing compressive strength up to 51.2% and increasing tensile strength up to 28.8%. Micro-structural analysis identified new formations on the surface of basalt fibers, which indicates the good adhesion of hardened cement paste to the fibers. Stability of concrete strength parameters has significantly increased with introduction of basalt fibers into concrete mix.

  9. Reactive Strength Index: A Poor Indicator of Reactive Strength?

    Healy, Robin; Kenny, Ian; Harrison, Drew

    2017-11-28

    The primary aim was to assess the relationships between reactive strength measures and associated kinematic and kinetic performance variables achieved during drop jumps. A secondary aim was to highlight issues with the use of reactive strength measures as performance indicators. Twenty eight national and international level sprinters, consisting of fourteen men and women, participated in this cross-sectional analysis. Athletes performed drop jumps from a 0.3 m box onto a force platform with dependent variables contact time (CT), landing time (TLand), push-off time (TPush), flight time (FT), jump height (JH), reactive strength index (RSI, calculated as JH / CT), reactive strength ratio (RSR, calculated as FT / CT) and vertical leg spring stiffness (Kvert) recorded. Pearson's correlation test found very high to near perfect relationships between RSI and RSR (r = 0.91 to 0.97), with mixed relationships found between RSI, RSR and the key performance variables, (Men: r = -0.86 to -0.71 between RSI/RSR and CT, r = 0.80 to 0.92 between RSI/RSR and JH; Women: r = -0.85 to -0.56 between RSR and CT, r = 0.71 between RSI and JH). This study demonstrates that the method of assessing reactive strength (RSI versus RSR) may be influenced by the performance strategies adopted i.e. whether an athlete achieves their best reactive strength scores via low CTs, high JHs or a combination. Coaches are advised to limit the variability in performance strategies by implementing upper and / or lower CT thresholds to accurately compare performances between individuals.

  10. Lifting strength in two-person teamwork.

    Lee, Tzu-Hsien

    2016-01-01

    This study examined the effects of lifting range, hand-to-toe distance, and lifting direction on single-person lifting strengths and two-person teamwork lifting strengths. Six healthy males and seven healthy females participated in this study. Two-person teamwork lifting strengths were examined in both strength-matched and strength-unmatched groups. Our results showed that lifting strength significantly decreased with increasing lifting range or hand-to-toe distance. However, lifting strengths were not affected by lifting direction. Teamwork lifting strength did not conform to the law of additivity for both strength-matched and strength-unmatched groups. In general, teamwork lifting strength was dictated by the weaker of the two members, implying that weaker members might be exposed to a higher potential danger in teamwork exertions. To avoid such overexertion in teamwork, members with significantly different strength ability should not be assigned to the same team.

  11. Improved skeletal muscle mass and strength after heavy strength training in very old individuals

    Bechshøft, Rasmus Leidesdorff; Malmgaard-Clausen, Nikolaj Mølkjær; Gliese, Bjørn

    2017-01-01

    , muscle fiber type distribution and size did not differ significantly between groups. We conclude that in protein supplemented very old individuals, heavy resistance training can increase muscle mass and strength, and that the relative improvement in mass is more pronounced when initial muscle mass is low.......Age-related loss of muscle mass and function represents personal and socioeconomic challenges. The purpose of this study was to determine the adaptation of skeletal musculature in very old individuals (83 + years) performing 12 weeks of heavy resistance training (3 ×/week) (HRT) compared to a non....... The increase in CSA is correlated inversely with the baseline level of CSA (R2 = 0.43, P muscle isometric strength, isokinetic peak torque and power increased significantly only in HRT by 10–15%, whereas knee extension one-repetition maximum (1 RM) improved by 91%. Physical functional tests...

  12. Global model for the lithospheric strength and effective elastic thickness

    Tesauro, M.; Kaban, M.K.; Cloetingh, S.A.P.L.

    2013-01-01

    Global distribution of the strength and effective elastic thickness (Te) of the lithosphere are estimated using physical parameters from recent crustal and lithospheric models. For the Te estimation we apply a new approach, which provides a possibility to take into account variations of Young

  13. Shear Bond Strength of a Novel Porcelain Repair System for ...

    2018-04-04

    Apr 4, 2018 ... Each fracture type was examined under a stereomicroscope .... fracture types. Statistical analysis. The normal distribution of data was examined using the Kolmogorov–Smirnov test. Shear bond strength data of repaired CAD/CAM .... adhesives to enamel, dentine, and porcelain surfaces can be compared.

  14. Strength and life under creeping

    Pospishil, B.

    1982-01-01

    Certain examples of the application of the Lepin modified creep model, which are of interest from technical viewpoint, are presented. Mathematical solution of the dependence of strength limit at elevated temperatures on creep characteristics is obtained. Tensile test at elevated temperatures is a particular case of creep or relaxation and both strength limit and conventional yield strength at elevated temperatures are completely determined by parameters of state equations during creep. The equation of fracture summing during creep is confirmed not only by the experiment data when stresses change sporadically, but also by good reflection of durability curve using the system of equations. The system presented on the basis of parameters of the equations obtained on any part of durability curve, permits to forecast the following parameters of creep: strain, strain rate, life time, strain in the process of fracture. Tensile test at elevated temperature is advisable as an addition when determining creep curves (time-strain curves) [ru

  15. Withdrawal Strength and Bending Yield Strength of Stainless Steel Nails

    Douglas R. Rammer; Samuel L. Zelinka

    2015-01-01

    It has been well established that stainless steel nails have superior corrosion performance compared to carbon steel or galvanized nails in treated wood; however, their mechanical fastening behavior is unknown. In this paper, the performance of stainless steel nails is examined with respect to two important properties used in wood connection design: withdrawal strength...

  16. Strength Properties of Aalborg Clay

    Iversen, Kirsten Malte; Nielsen, Benjaminn Nordahl; Augustesen, Anders Hust

    glacial time are characterised by the absence of this mussel. These deposits are named Aalborg Clay and Aalborg Sand. In the city of Aalborg, a fill layer superposes Aalborg Clay. This layer is at some places found to be 6m thick. This fill layer does not provide sufficient bearing capacity, which has...... resulted in many damaged buildings in Aalborg. To provide sufficient bearing capacity it is therefore necessary either to remove the fill or to construct the building on piles. Both methods imply that the strength of Aalborg Clay is important for the construction. This paper evaluates the strength...

  17. Topological strength of magnetic skyrmions

    Bazeia, D.; Ramos, J.G.G.S.; Rodrigues, E.I.B.

    2017-02-01

    This work deals with magnetic structures that attain integer and half-integer skyrmion numbers. We model and solve the problem analytically, and show how the solutions appear in materials that engender distinct, very specific physical properties, and use them to describe their topological features. In particular, we found a way to model skyrmion with a large transition region correlated with the presence of a two-peak skyrmion number density. Moreover, we run into the issue concerning the topological strength of a vortex-like structure and suggest an experimental realization, important to decide how to modify and measure the topological strength of the magnetic structure.

  18. Effect of osteogenesis imperfecta mutations in tropocollagen molecule on strength of biomimetic tropocollagen-hydroxyapatite nanocomposites

    Dubey, Devendra K.; Tomar, Vikas

    2010-01-01

    Osteogenesis Imperfecta (OI) is a genetic disorder that affects cellular synthesis of Type-I collagen fibrils and causes extreme bone fragility. This study reports the effects of OI mutations in Tropocollagen (TC) molecules on strength of model Tropocollagen-Hydroxyapatite biomaterials with two different mineral [hydroxyapatite (HAP)] distributions using three dimensional atomistic simulations. Results show that the effect of TC mutations on the strength of TC-HAP biomaterials is insignificant. Instead, change in mineral distribution showed significant impact on the overall strength of TC-HAP biomaterials. Study suggests that TC mutations manifest themselves by changing the mineral distribution during hydroxyapatite growth and nucleation period.

  19. The nuclear deformation versus the spin-flip like excitations and the suppression of the 2νββ decay amplitude

    Raduta, A.A.; Delion, D.S.; Faessler, A.

    1997-01-01

    The suppression mechanism of the Gamow-Teller double beta decay amplitude M GT is studied using a many body Hamiltonian which describes a composite system of protons and neutrons moving in a projected spherical single particle basis. Alike nucleons interact through pairing while protons and neutrons by a separable dipole-dipole force both in the particle-hole (ph) and particle-particle (pp) channels. The spin-flip and non-spin-flip components of the QRPA phonons have a differents contribution to the M GT values. The relative magnitudes and phases depend both on the strength of the particle-particle interaction (g pp ) and on the nuclear deformation. The deformation yields a fragmentation of the M GT value on one hand and washes out the separation of states of pure spin-flip and non-spin-flip structures. Due to this effect M GT has only one fragmented resonance structure in the low part of the spectrum. (orig.)

  20. New calculations of gross β-decay properties for astrophysical applications: Speeding-up the classical r process

    Moeller, Peter; Pfeiffer, Bernd; Kratz, Karl-Ludwig

    2003-01-01

    Recent compilations of experimental gross β-decay properties, i.e., half-lives (T 1/2 ) and neutron-emission probabilities (P n ), are compared to improved global macroscopic-microscopic model predictions. The model combines calculations within the quasiparticle (QP) random-phase approximation for the Gamow-Teller (GT) part with an empirical spreading of the QP strength and the gross theory for the first-forbidden part of β - decay. Nuclear masses are either taken from the 1995 data compilation of Audi et al., when available, otherwise from the finite-range droplet model. Especially for spherical and neutron-(sub-)magic isotopes a considerable improvement compared to our earlier predictions for pure GT decay (ADNDT, 1997) is observed. T 1/2 and P n values up to the neutron drip line have been used in r-process calculations within the classical 'waiting-point' approximation. With the new nuclear-physics input, a considerable speeding-up of the r-matter flow is observed, in particular at those r-abundance peaks which are related to magic neutron-shell closures

  1. Study of {sup 22}Al radioactivity and spectroscopy by resonant elastic scattering; Etude de la radioactivite de {sup 22}Al et spectroscopie par diffusion elastique resonante

    Achouri, N.L

    2001-09-01

    This thesis describes two studies which explore the structure of proton-rich nuclei. The first of these concerned an investigation of the {beta}-delayed charged particle decay of {sup 22}Al. The experiment was carried out using the LISE3 spectrometer at GANIL and permitted the energies of the {beta}-p, {beta}-2p and {beta}-{alpha} transitions together with the corresponding branching ratios to be determined with an improved precision over earlier work. In addition the coincidences with {gamma}-rays were measured for the first time allowing the decay scheme to be reconstructed. Comparison with shell model calculations using the code OXBASH and the mirror nucleus {sup 22}F allowed the spin and parity and the mass of {sup 22}Al g.s. as well as levels in {sup 22}Mg to be deduced. The experimentally determined Gamow Teller strength was found to be in good agreement at low excitation energies with a shell model calcination employing an effective operator. The second study concerned the development of resonant elastic scattering in inverse kinematics as a spectroscopic tool. Extensive simulations were carried out to ascertain the feasibility of such experiments as well as to optimise the set-up. In the context of the later, particular attention was paid to the final resolution. Experiments subsequently undertaken at GANIL with stable and radioactive beams demonstrated that the technique will be a powerful spectroscopic tool for use with radioactive beams with characteristics similar to those that will be furnished by SPIRAL. (author)

  2. Relativistic mean field theory for unstable nuclei

    Toki, Hiroshi

    2000-01-01

    We discuss the properties of unstable nuclei in the framework of the relativistic mean field (RMF) theory. We take the RMF theory as a phenomenological theory with several parameters, whose form is constrained by the successful microscopic theory (RBHF), and whose values are extracted from the experimental values of unstable nuclei. We find the outcome with the newly obtained parameter sets (TM1 and TMA) is promising in comparison with various experimental data. We calculate systematically the ground state properties of even-even nuclei up to the drip lines; about 2000 nuclei. We find that the neutron magic shells (N=82, 128) at the standard magic numbers stay at the same numbers even far from the stability line and hence provide the feature of the r-process nuclei. However, many proton magic numbers disappear at the neutron numbers far away from the magic numbers due to the deformations. We discuss how to describe giant resonances for the case of the non-linear coupling terms for the sigma and omega mesons in the relativistic RPA. We mention also the importance of the relativistic effect on the spin observables as the Gamow-Teller strength and the longitudinal and transverse spin responses. (author)

  3. Additional results from the β-delayed proton decays of 27P and 31Cl

    Ognibene, T.J.; Powell, J.; Moltz, D.M.; Rowe, M.W.; Cerny, J.

    1996-01-01

    β-delayed proton decays of the nuclides 27 P and 31 Cl were measured using the helium-jet recoil collection technique and low-energy particle identification detector telescopes. In 27 P, two new proton groups at 466±3 keV and 612±2 keV, with intensities of 9±2% and 97±3% relative to the main (100%) group at 731±2 keV, were discovered. Additionally, during the 27 P experiments, a new proton transition was identified following the β decay of 28 P. This group, at a proton energy of 1452±4 keV, had a 2±1% intensity relative to the 100% group at 679±1 keV. A total 27 P β-delayed proton branch of 0.07% was estimated. The experimental Gamow-Teller β-decay strengths of the observed transitions from 27 P were compared to results from shell model calculations. A search for new proton transitions in 31 Cl, the next member of this A=4n+3, T z =-3/2 series, was unsuccessful. However, several proton peaks that had been previously assigned to 31 Cl decay were shown to be from the decay of 25 Si. copyright 1996 The American Physical Society

  4. Many-body quantum chaos: Recent developments and applications to nuclei

    Gomez, J.M.G.; Kar, K.; Kota, V.K.B.; Molina, R.A.; Relano, A.; Retamosa, J.

    2011-01-01

    In the last decade, there has been an increasing interest in the analysis of energy level spectra and wave functions of nuclei, particles, atoms and other quantum many-body systems by means of statistical methods and random matrix ensembles. The concept of quantum chaos plays a central role for understanding the universal properties of the energy spectrum of quantum systems. Since these properties concern the whole spectrum, statistical methods become an essential tool. Besides random matrix theory, new theoretical developments making use of information theory, time series analysis, and the merging of thermodynamics and the semiclassical approximation are emphasized. Applications of these methods to quantum systems, especially to atomic nuclei, are reviewed. We focus on recent developments like the study of 'imperfect spectra' to estimate the degree of symmetry breaking or the fraction of missing levels, the existence of chaos remnants in nuclear masses, the onset of chaos in nuclei, and advances in the comprehension of the Hamiltonian structure in many-body systems. Finally, some applications of statistical spectroscopy methods generated by many-body chaos and two-body random matrix ensembles are described, with emphasis on Gamow-Teller strength sums and beta decay rates for stellar evolution and supernovae.

  5. Possible test of grand unification in the double beta-decay

    Faessler, A.

    1988-01-01

    The more successful grand unified theories predict that the neutrino is identical with its antiparticle and therefore is a Majorana neutrino which violates lepton number conservation. Such a neutrino should have a finite mass and also a small right handed weak interaction. If the double neutrinoless beta decay is observed with the full decay energy in the two electrons, it would establish that the electron neutrino is a Majorana particle. It is shown that the relativistic corrections of the nucleonic wave functions are essential for determining an upper limit of the right handedness from the measured lower limit of the life-time against the neutrinoless double beta decay. The upper limit for the right handedness of the weak interaction derived from the lower limit of the life-times against the neutrinoless beta decay is vertical stroke vertical stroke -8 and the upper limit for the neutrino mass is vertical stroke ν m>vertical stroke + -decay in proton rich nuclei, one can explain the long standing puzzle of the quenching of the Gamow-Teller strength in agreement with the data. (orig.)

  6. Shell structure from N=Z (100Sn) to N>>Z (78Ni)

    Grawe, H.

    2003-01-01

    The shell structure of 100 Sn shows striking resemblance to 56 Ni one major shell below. Large-scale shell model calculations employing realistic interactions derived from effective NN potentials and allowing for up to 4p4h excitations of the 100 Sn core account very well for the spectroscopy of key neighbours 102,103 Sn, 98 Cd and 94 Ag, as inferred from level energies, isomerism, E2 strengths and Gamow-Teller (GT) decay of high-spin states. Recent β- decay studies of 101-104 Sn using the sulphurisation ISOL technique open the perspective to study the 100 Sn GT resonance. At N>>Z the persistence of the N=50 and the weakness of the N=40 shells are traced back to the monopole interaction in S=0 proton-neutron (πν) pairs of nucleons, a scenario which can be generalised to account for the new N=6,16(14),34(32) magicity in light neutron-rich nuclei. (orig.)

  7. Wireless Concrete Strength Monitoring of Wind Turbine Foundations

    Marcus Perry

    2017-12-01

    Full Text Available Wind turbine foundations are typically cast in place, leaving the concrete to mature under environmental conditions that vary in time and space. As a result, there is uncertainty around the concrete’s initial performance, and this can encourage both costly over-design and inaccurate prognoses of structural health. Here, we demonstrate the field application of a dense, wireless thermocouple network to monitor the strength development of an onshore, reinforced-concrete wind turbine foundation. Up-to-date methods in fly ash concrete strength and maturity modelling are used to estimate the distribution and evolution of foundation strength over 29 days of curing. Strength estimates are verified by core samples, extracted from the foundation base. In addition, an artificial neural network, trained using temperature data, is exploited to demonstrate that distributed concrete strengths can be estimated for foundations using only sparse thermocouple data. Our techniques provide a practical alternative to computational models, and could assist site operators in making more informed decisions about foundation design, construction, operation and maintenance.

  8. Wireless Concrete Strength Monitoring of Wind Turbine Foundations.

    Perry, Marcus; Fusiek, Grzegorz; Niewczas, Pawel; Rubert, Tim; McAlorum, Jack

    2017-12-16

    Wind turbine foundations are typically cast in place, leaving the concrete to mature under environmental conditions that vary in time and space. As a result, there is uncertainty around the concrete's initial performance, and this can encourage both costly over-design and inaccurate prognoses of structural health. Here, we demonstrate the field application of a dense, wireless thermocouple network to monitor the strength development of an onshore, reinforced-concrete wind turbine foundation. Up-to-date methods in fly ash concrete strength and maturity modelling are used to estimate the distribution and evolution of foundation strength over 29 days of curing. Strength estimates are verified by core samples, extracted from the foundation base. In addition, an artificial neural network, trained using temperature data, is exploited to demonstrate that distributed concrete strengths can be estimated for foundations using only sparse thermocouple data. Our techniques provide a practical alternative to computational models, and could assist site operators in making more informed decisions about foundation design, construction, operation and maintenance.

  9. $\\beta$-delayed neutron spectroscopy of $^{130-132}$ Cd isotopes with the ISOLDE decay station and the VANDLE array

    We propose to use the new ISOLDE decay station and the neutron detector VANDLE to measure the $\\beta$-delayed neutron emission of N=82-84 $^{130-132}$Cd isotopes. The large delayed neutron emission probability observed in a previous ISOLDE measurement is indicative of the Gamow-Teller transitions due to the decay of deep core neutrons. Core Gamow-Teller decay has been experimentally proven in the $^{78}$Ni region for the N>50 nuclei using the VANDLE array. The spectroscopic measurement of delayed neutron emission along the cadmium isotopic chain will allow us to track the evolution of the single particle states and the shell gap.

  10. Fatigue Strength of Titanium Risers - Defect Sensitivity

    Babalola, Olusegun Tunde

    2001-07-01

    This study is centred on assessment of the fatigue strength of titanium fusion welds for deep-water riser's applications. Deep-water risers are subjected to significant fatigue loading. Relevant fatigue data for titanium fusion welds are very scarce. Hence there is a need for fatigue data and life prediction models for such weldments. The study has covered three topics: Fatigue testing, Fractography and defect assessment, and Fracture Mechanics modelling of fatigue crack growth. Two series of welded grade of titanium consisting of 14 specimens in each series were fatigue tested under constant amplitude loading. Prior to fatigue testing, strain gauge measurements of some specimens was conducted to enable the definition of stress range in the fatigue assessment procedure. The results were compared with finite solid element analysis and related to fatigue stresses in a riser pipe wall. Distribution and geometry of internal and surface defects both in the as-welded and in the post-weld machined conditions were assessed using fractography. This served as a tool to determine the fatigue initiation point in the welds. Fracture mechanics was applied to model fatigue strength of titanium welds with initiation from weld defects. Two different stress intensity factor formulations for embedded eccentrically placed cracks were used for analysis of elliptical cracks with the major axis parallel and close to one of the free surfaces. The methods were combined to give a satisfactory model for crack growth analysis. The model analyses crack growth of elliptical and semi-elliptical cracks in two directions, with updating of the crack geometry. Fatigue strength assessment was conducted using two crack growth models, the Paris-Erdogan relation with no threshold and the Donahue et al. relation with an implied threshold. The model was validated against experimental data, with a discussion on the choice of crack growth model. (author)

  11. Statistical study on the strength of structural materials and elements

    Blume, J.A.; Dalal, J.S.; Honda, K.K.

    1975-07-01

    Strength data for structural materials and elements including concrete, reinforcing steel, structural steel, plywood elements, reinforced concrete beams, reinforced concrete columns, brick masonry elements, and concrete masonry walls were statistically analyzed. Sample statistics were computed for these data, and distribution parameters were derived for normal, lognormal, and Weibull distributions. Goodness-of-fit tests were performed on these distributions. Most data, except those for masonry elements, displayed fairly small dispersion. Dispersion in data for structural materials was generally found to be smaller than for structural elements. Lognormal and Weibull distributions displayed better overall fits to data than normal distribution, although either Weibull or lognormal distribution can be used to represent the data analyzed. (auth)

  12. Strengths, Weaknesses, Opportunities and Threats

    Bull, J.W.; Jobstvogt, N.; Böhnke-Henrichs, A.; Mascarenhas, A.; Sitas, N.; Baulcomb, C.; Lambini, C.K.; Rawlins, M.; Baral, H.; Zähringer, J.; Carter-Silk, E.; Balzan, M.V.; Kenter, J.O.; Häyhä, T.; Petz, K.; Koss, R.

    2016-01-01

    The ecosystem services concept (ES) is becoming a cornerstone of contemporary sustainability thought. Challenges with this concept and its applications are well documented, but have not yet been systematically assessed alongside strengths and external factors that influence uptake. Such an

  13. Polynomial expansions and transition strengths

    Draayer, J.P.

    1980-01-01

    The subject is statistical spectroscopy applied to determining strengths and strength sums of excitation processes in nuclei. The focus will be on a ds-shell isoscalar E2 study with detailed shell-model results providing the standard for comparison; similar results are available for isovector E2 and M1 and E4 transitions as well as for single-particle transfer and ν +- decay. The present study is intended to serve as a tutorial for applications where shell-model calculations are not feasible. The problem is posed and a schematic theory for strengths and sums is presented. The theory is extended to include the effect of correlations between H, the system Hamiltonian, and theta, the excitation operator. Associated with correlation measures is a geometry that can be used to anticipate the goodness of a symmetry. This is illustrated for pseudo SU(3) in the fp-shell. Some conclusions about fluctuations and collectivity that one can deduce from the statistical results for strengths are presented

  14. On strength of porous material

    Nielsen, Lauge Fuglsang

    1999-01-01

    The question of non-destructive testing of porous materials has always been of interest for the engineering profession. A number of empirically based MOE-MOR relations between stiffness (Modulus Of Elasticity) and strength (Modulus OF Rupture) of materials have been established in order to control...

  15. Strengths, weaknesses, opportunities and threats

    Bull, Joseph William; Jobstvogt, N.; Böhnke-Henrichs, A.

    2016-01-01

    The ecosystem services concept (ES) is becoming a cornerstone of contemporary sustainability thought. Challenges with this concept and its applications are well documented, but have not yet been systematically assessed alongside strengths and external factors that influence uptake. Such an assess...

  16. Comparing strengths of beliefs explicitly

    Ghosh, S.; de Jongh, D.

    2013-01-01

    Inspired by a similar use in provability logic, formulas p > B q and p ≥ B q are introduced in the existing logical framework for discussing beliefs to express that the strength of belief in p is greater than (or equal to) that in q. Besides its usefulness in studying the properties of the concept

  17. Strength training for the warfighter.

    Kraemer, William J; Szivak, Tunde K

    2012-07-01

    Optimizing strength training for the warfighter is challenged by past training philosophies that no longer serve the modern warfighter facing the "anaerobic battlefield." Training approaches for integration of strength with other needed physical capabilities have been shown to require a periodization model that has the flexibility for changes and is able to adapt to ever-changing circumstances affecting the quality of workouts. Additionally, sequencing of workouts to limit over-reaching and development of overtraining syndromes that end in loss of duty time and injury are paramount to long-term success. Allowing adequate time for rest and recovery and recognizing the negative influences of extreme exercise programs and excessive endurance training will be vital in moving physical training programs into a more modern perspective as used by elite strength-power anaerobic athletes in sports today. Because the warfighter is an elite athlete, it is time that training approaches that are scientifically based are updated within the military to match the functional demands of modern warfare and are given greater credence and value at the command levels. A needs analysis, development of periodized training modules, and individualization of programs are needed to optimize the strength of the modern warfighter. We now have the knowledge, professional coaches and nonprofit organization certifications with continuing education units, and modern training technology to allow this to happen. Ultimately, it only takes command decisions and implementation to make this possible.

  18. Modeling of Sylgard Adhesive Strength

    Stevens, Ralph Robert [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-02-03

    Sylgard is the name of a silicone elastomeric potting material manufactured by Dow Corning Corporation.1 Although the manufacturer cites its low adhesive strength as a feature of this product, thin layers of Sylgard do in fact have a non-negligible strength, which has been measured in recent tensile and shear debonding tests. The adhesive strength of thin layers of Sylgard potting material can be important in applications in which components having signi cantly di erent thermal expansion properties are potted together, and the potted assembly is subjected to temperature changes. The tensile and shear tractions developed on the potted surfaces of the components can cause signi cant internal stresses, particularly for components made of low-strength materials with a high area-to-volume ratio. This report is organized as follows: recent Sylgard debonding tests are rst brie y summarized, with particular attention to the adhesion between Sylgard and PBX 9501, and also between Sylgard and aluminum. Next, the type of numerical model that will be used to simulate the debonding behavior exhibited in these tests is described. Then the calibration of the debonding model will be illustrated. Finally, the method by which the model parameters are adjusted (scaled) to be applicable to other, non- tested bond thicknesses is summarized, and all parameters of the model (scaled and unscaled) are presented so that other investigators can reproduce all of the simulations described in this report as well as simulations of the application of interest.

  19. Plasmonic hybrid nanostructure with controlled interaction strength

    Grzelak, Justyna K.; Krajnik, Bartosz; Thoreson, Mark D.; Nyga, Piotr; Shalaev, Vladimir M.; Mackowski, Sebastian

    2014-03-01

    In this report we discuss the influence of plasmon excitations in a silver island film on the fluorescence of photosynthetic complex, peridinin-chlorophyll-protein (PCP). Control of the separation between these two components is obtained by fabricating a wedge layer of silica across the substrate, with a thickness from 0 to 46 nm. Continuous variation of the silica thickness allows for gradual change of interaction strength between plasmon excitations in the metallic film and the excited states of pigments comprising photosynthetic complexes. While the largest separation between the silver film and photosynthetic complexes results in fluorescence featuring a mono-exponential decay and relatively narrow distribution of intensities, the PCP complexes placed on thinner silica spacers show biexponential fluorescence decay and significantly broader distribution of total fluorescence intensities. This broad distribution is a signature of stronger sensitivity of fluorescence enhancement upon actual parameters of a hybrid nanostructure. By gradual change of the silica spacer thickness we are able to reproduce classical distance dependence of fluorescence intensity in plasmonic hybrid nanostructures on ensemble level. Experiments carried out for different excitation wavelengths indicate that the interaction is stronger for excitations resonant with plasmon absorption in the metallic layer.

  20. Asymptotic strength of thermal pulses in the helium shell burning

    Fujimoto, M Y [Niigata Univ. (Japan); Sugimoto, D

    1979-03-01

    Secular growth in the strength of the recurrent thermal pulses of helium shell burning is discussed for the purpose of determining its asymptotic strength. It is shown that the pulse grows stronger if the helium zone has been cooled more before the initiation of the pulse. The secular growth of the pulse is related with the increasing degree of cooling. Thermal pulses are computed for an initial model corresponding to the maximum possible cooling, i.e., for a model in which the steady-state entropy distribution was realized in the helium zone. Such thermal pulses are shown to give an upper bound to the asymptotic strength, which is close enough to the asymptotic strength itself for relatively large core masses. Numerical results are given for the core mass of 1.07 M sub(sun), for which the asymptotic strength is found to be 9 x 10/sup 6/ L sub(sun). Thermal pulses are also computed for an initial model which has been cooled artificially more than the steady-state model. The first pulse results in a much greater strength than in the normal model, but a later pulse approaches the normal asymptotic value. Such models are also discussed in relation to the shell flashes on accreting white dwarfs.

  1. Systematics of strength function sum rules

    Calvin W. Johnson

    2015-11-01

    Full Text Available Sum rules provide useful insights into transition strength functions and are often expressed as expectation values of an operator. In this letter I demonstrate that non-energy-weighted transition sum rules have strong secular dependences on the energy of the initial state. Such non-trivial systematics have consequences: the simplification suggested by the generalized Brink–Axel hypothesis, for example, does not hold for most cases, though it weakly holds in at least some cases for electric dipole transitions. Furthermore, I show the systematics can be understood through spectral distribution theory, calculated via traces of operators and of products of operators. Seen through this lens, violation of the generalized Brink–Axel hypothesis is unsurprising: one expects sum rules to evolve with excitation energy. Furthermore, to lowest order the slope of the secular evolution can be traced to a component of the Hamiltonian being positive (repulsive or negative (attractive.

  2. The strength and failure of silica optical fibers

    Yan, C; Bai, R X; Yu, H; Canning, J; Law, S

    2010-01-01

    The mechanical strength and failure behavior of conventional and microstructured silica optical fibers was investigated using a tensile test and fracture mechanics and numerical analyses. The effect of polymer coating on failure behavior was also studied. The results indicate that all these fibers fail in a brittle manner and failure normally starts from fiber surfaces. The failure loads observed in coated fibers are higher than those in bare fibers. The introduction of air holes reduces fiber strength and their geometrical arrangements have a remarkable effect on stress distribution in the longitudinal direction. These results are potentially useful for the design, fabrication and evaluation of optical fibers for a wide range of applications.

  3. Fuzzy barrier distributions

    Piasecki, E.

    2009-01-01

    Heavy-ion collisions often produce a fusion barrier distribution with structures displaying a fingerprint of couplings to highly collective excitations [1]. Basically the same distribution can be obtained from large-angle quasi-elastic scattering, though here the role of the many weak direct-reaction channels is unclear. For 2 0N e + 9 0Z r we have observed the barrier structures expected for the highly deformed neon projectile, but for 2 0N e + 9 2Z r we find completely smooth distribution (see Fig.1). We find that transfer channels in these systems are of similar strength but single particle excitations are significantly stronger in the latter case. They apparently reduce the 'resolving power' of the quasi-elastic channel, what leads to smeared out, or 'fuzzy' barrier distribution. This is the first case when such a phenomenon has been observed.(author)

  4. Magnetic dipole strength in {sup 128}Xe and {sup 134}Xe in the spin-flip resonance region

    Massarczyk, R. [Helmholtz-Zentrum Dresden-Rossendorf, 01328 Dresden (Germany); Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Rusev, G. [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Schwengner, R.; Doenau, F. [Helmholtz-Zentrum Dresden-Rossendorf, 01328 Dresden (Germany); Bathia, C. [McMaster University, Hamilton, Ontario L8S4L8 (Canada); Gooden, M.E.; Kelley, J.H. [Triangle Universities Nuclear Laboratory, Durham, NC 27708 (United States); North Carolina State University, Raleigh, NC 27695 (United States); Tonchev, A.P. [Lawrence Livermore National Laboratory, Livermore, CA 94550 (United States); Tornow, W. [Triangle Universities Nuclear Laboratory, Durham, NC 27708 (United States); Duke University, Durham, NC 27708 (United States)

    2015-07-01

    The magnetic dipole strength in the energy region of the spin-flip resonance is investigated in {sup 128}Xe and {sup 134}Xe using quasimonoenergetic and linearly polarized γ-ray beams at the High-Intensity γ-Ray Source facility in Durham, North Carolina, USA. Absorption cross sections were deduced for the magnetic and electric and dipole strength distributions separately for various intervals of excitation energy, including the strength of states in the unresolved quasicontinuum. The magnetic dipole strength distributions show structures resembling a resonance in the spin-flip region around an excitation energy of 8 MeV. The electric dipole strength distributions obtained from the present experiments are in agreement with the ones deduced from an earlier experiment using broad-band bremsstrahlung instead of a quasimonoenergetic beam. The experimental magnetic and electric dipole strength distributions are compared with model predictions.

  5. Optical Field-Strength Polarization of Two-Mode Single-Photon States

    Linares, J.; Nistal, M. C.; Barral, D.; Moreno, V.

    2010-01-01

    We present a quantum analysis of two-mode single-photon states based on the probability distributions of the optical field strength (or position quadrature) in order to describe their quantum polarization characteristics, where polarization is understood as a significative confinement of the optical field-strength values on determined regions of…

  6. Primary care in Switzerland gains strength.

    Djalali, Sima; Meier, Tatjana; Hasler, Susann; Rosemann, Thomas; Tandjung, Ryan

    2015-06-01

    Although there is widespread agreement on health- and cost-related benefits of strong primary care in health systems, little is known about the development of the primary care status over time in specific countries, especially in countries with a traditionally weak primary care sector such as Switzerland. The aim of our study was to assess the current strength of primary care in the Swiss health care system and to compare it with published results of earlier primary care assessments in Switzerland and other countries. A survey of experts and stakeholders with insights into the Swiss health care system was carried out between February and March 2014. The study was designed as mixed-modes survey with a self-administered questionnaire based on a set of 15 indicators for the assessment of primary care strength. Forty representatives of Swiss primary and secondary care, patient associations, funders, health care authority, policy makers and experts in health services research were addressed. Concordance between the indicators of a strong primary care system and the real situation in Swiss primary care was rated with 0-2 points (low-high concordance). A response rate of 62.5% was achieved. Participants rated concordance with five indicators as 0 (low), with seven indicators as 1 (medium) and with three indicators as 2 (high). In sum, Switzerland achieved 13 of 30 possible points. Low scores were assigned because of the following characteristics of Swiss primary care: inequitable local distribution of medical resources, relatively low earnings of primary care practitioners compared to specialists, low priority of primary care in medical education and training, lack of formal guidelines for information transfer between primary care practitioners and specialists and disregard of clinical routine data in the context of medical service planning. Compared to results of an earlier assessment in Switzerland, an improvement of seven indicators could be stated since 1995. As a

  7. 21 CFR 211.196 - Distribution records.

    2010-04-01

    ...: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Records and Reports § 211.196 Distribution records. Distribution records shall contain the name and strength of the product and description... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Distribution records. 211.196 Section 211.196 Food...

  8. Muscle Strength and Poststroke Hemiplegia

    Kristensen, Otto H; Stenager, Egon; Dalgas, Ulrik

    2017-01-01

    undergone peer review; and (4) were available in English or Danish. DATA EXTRACTION: The psychometric properties of isokinetic dynamometry were reviewed with respect to reliability, validity, and responsiveness. Furthermore, comparisons of strength between paretic, nonparetic, and comparable healthy muscles...... isokinetic dynamometry. DATA SOURCES: A systematic literature search of 7 databases was performed. STUDY SELECTION: Included studies (1) enrolled participants with definite poststroke hemiplegia according to defined criteria; (2) assessed muscle strength or power by criterion isokinetic dynamometry; (3) had...... were reviewed. DATA SYNTHESIS: Twenty studies covering 316 PPSH were included. High intraclass correlation coefficient (ICC) inter- and intrasession reliability was reported for isokinetic dynamometry, which was independent of the tested muscle group, contraction mode, and contraction velocity...

  9. Line strengths in WN stars

    Leep, E.M.

    1982-01-01

    The author has analyzed high-dispersion spectra of over 100 WN stars in the Galaxy and the Large Magellenic Cloud (LMC). Most of the spectra were obtained through 4-m telescopes (Conti, Leep, and Perry 1981). The measured strengths of the WN classification lines N III lambdalambda4634-41, N IV lambda4057, N V lambda4604 (Smith 1968) for stars on WN subtypes 2.5-8 are shown. The assignments of WN subtypes are based on visual estimates of ratios of line strengths according to the scheme of Smith (1968), except that stars appearing to be earlier than WN3 are classified as WN2 or WN2.5 as explained by van der Hucht et al. (1981) and by Conti, Leep and Perry (1981). (Auth.)

  10. Soil strength and forest operations

    Beekman, F.

    1987-01-01

    The use of heavy machinery and transport vehicles is an integral part of modern forest operations. This use often causes damage to the standing trees and to the soil. In this study the effects of vehicle traffic on the soil are analysed and the possible consequences for forest management discussed. The study is largely restricted to sandy and loamy soils because of their importance for Dutch forestry.

    Soil strength, defined as the resistance of soil structure against the impa...

  11. Electronic Correlation Strength of Pu

    Svane, A.; C. Albers, R.; E. Christensen, N.

    2013-01-01

    A new electronic quantity, the correlation strength, is defined as a necessary step for understanding the properties and trends in strongly correlated electronic materials. As a test case, this is applied to the different phases of elemental Pu. Within the GW approximation we have surprisingly...... found a "universal" scaling relationship, where the f-electron bandwidth reduction due to correlation effects is shown to depend only upon the local density approximation (LDA) bandwidth and is otherwise independent of crystal structure and lattice constant....

  12. Strength and Microstructure of Ceramics

    1989-11-01

    Forex - one particular alumina ceramic, I our own detailed crack ample, the relatively large values of r, and c* for the VI observations, and those of...particularly toughness indices, 1i71", indicating that there is sonic the c° , T parameters. However, the indentation mcth- kind of trade -o1Tbetwecn...macroscopic and microsnpic odology takes us closer to the strengths of specimens toughness levels, and that this trade -off is cont’olled by with natural

  13. Long range supergravity coupling strengths

    Kenyon, I.R.

    1991-01-01

    A limit of 2x10 -13 has recently been deduced for the fractional difference between the gravitational masses of the K 0 and anti K 0 mesons. This limit is applied here to put stringent limits on the strengths of the long range vector-scalar gravitational couplings envisaged in supergravity theories. A weaker limit is inferred from the general relativistic fit to the precession of the orbit of the pulsar PSR1913+16. (orig.)

  14. Method to Locate Contaminant Source and Estimate Emission Strength

    Qu Hongquan

    2013-01-01

    Full Text Available People greatly concern the issue of air quality in some confined spaces, such as spacecraft, aircraft, and submarine. With the increase of residence time in such confined space, contaminant pollution has become a main factor which endangers life. It is urgent to identify a contaminant source rapidly so that a prompt remedial action can be taken. A procedure of source identification should be able to locate the position and to estimate the emission strength of the contaminant source. In this paper, an identification method was developed to realize these two aims. This method was developed based on a discrete concentration stochastic model. With this model, a sensitivity analysis algorithm was induced to locate the source position, and a Kalman filter was used to further estimate the contaminant emission strength. This method could track and predict the source strength dynamically. Meanwhile, it can predict the distribution of contaminant concentration. Simulation results have shown the virtues of the method.

  15. Axial charge of the weak nucleon current extracted from the β decays of spin aligned 12B and 12N

    Yamaguchi, Takayuki

    1998-01-01

    The alignment correlation terms in the β-ray angular distributions of the 12 B and 12 N mirror nuclei have been precisely measured, in order to investigate the mesonic effect in the axial charge matrix element. The spin alignments were created with the spin manipulation technique in the β-NMR method, which has been improved based on the recent studies of hyperfine interactions of 12 B and 12 N in a Mg crystal. From the sum of the alignment correlation terms, the ratio of the axial charge to the Gamow-Teller term was determined to be y = 4.66 ± 0.06(stat) ± 0.13(syst). The present result gives clear evidence of the mesonic effect in the axial charge and even more shows 16 ± 6% enhancement over the full calculation which includes the meson exchange effect and the core polarization effect. A possible mass renormalization for the decaying nucleon in a finite nucleon density explains this enhancement. (author)

  16. Patient safety climate strength: a concept that requires more attention

    Ginsburg, Liane; Gilin Oore, Debra

    2016-01-01

    Background When patient safety climate (PSC) surveys are used in healthcare, reporting typically focuses on PSC level (mean or per cent positive scores). This paper explores how an additional focus on PSC strength can enhance the utility of PSC survey data. Setting and participants 442 care providers from 24 emergency departments (EDs) across Canada. Methods We use anonymised data from the Can-PSCS PSC instrument collected in 2011 as part of the Qmentum accreditation programme. We examine differences in climate strength across EDs using the Rwg(j) and intraclass correlation coefficients measures of inter-rater agreement. Results Across the six survey dimensions, median Rwg(j) was sufficiently high to support shared climate perceptions (0.64–0.83), but varied widely across the 24 ED units. We provide an illustrative example showing vastly different climate strength (Rwg(j) range=0.17–0.86) for units with an equivalent level of PSC (eg, climate mean score=3). Conclusions Most PSC survey results focus solely on climate level. To facilitate improvement in PSC, we advocate a simple, holistic safety climate profile including three metrics: climate level (using mean or per cent positive climate scores), climate strength (using the Rwg(j), or SD as a proxy) and the shape of the distribution (using histograms to see the distribution of scores within units). In PSC research, we advocate paying attention to climate strength as an important variable in its own right. Focusing on PSC level and strength can further understanding of the extent to which PSC is a key variable in the domain of patient safety. PMID:26453636

  17. Sodium-calcium ion exchange on clay minerals at moderate to high ionic strengths

    Rogers, W.J.

    1979-12-01

    Sodium-calcium ion exchange on several clay minerals was studied at ionic strengths ranging from 0.01 to above 1.0. The minerals studied included attapulgite, illite, kaolin, and several montmorillonites. Distribution coefficients of calcium and sodium were obtained for the minerals over a wide range of solution conditions at pH five and equilibrium constants were calculated. The distribution coefficient of calcium, D/sub Ca/, was studied as a function of time, solution pH, loading, sodium concentration, and ionic strength fraction of sodium in constant ionic strength solutions. The distribution coefficient of sodium, D/sub Na/, was also studied as a function of time, loading, and sodium ionic strength fraction in constant total ionic strength solutions. Values of equilibrium constants calculated from distribution coefficients for solutions of constant ionic strength scattered bwteen 2 and 10 kg/kg for the montmorillonites and attapulgite while equilibrium constants for illite ranged from 5 to 10 kg/kg. No equilibrium constants for kaolin were calculated since distribution coefficients of sodium on this clay were too small to be measured. It was found that equilibrium constants at trace sodium loading were generally lower than those for higher sodium loadings by an order of magnitude or more due to the sensitivity of sodium distribution coefficients to the concentration of sodium in the clay at low loadings. Theoretical and experimental treatments of ion exclusion were included

  18. The statitistical evaluation of the uniaxial compressive strength of the Ruskov andesite

    Krepelka František

    2002-03-01

    Full Text Available The selection of a suitable model of the statistical distribution of the uniaxial compressive strength is discussed in the paper. The uniaxial compressive strength was studied on 180 specimens of the Ruskov andesite. The rate of loading was 1MPa.s-1. The experimental specimens had a prismatic form with a square base; the slightness ratio of specimens was 2:1. Three sets of specimens with a different length of the base edge were studied, namely 50, 30 and 10 mm. The result of the measurement were three sets with 60 values of the uniaxial compressive strength. The basic statistical parameters: the sample mean, the sample standard deviation, the variational interval, the minimum and maximum value, the sample obliqueness coefficient and the sharpness coefficient were evaluated for each collection. Two types of the distribution which can be joined with the real physical fundamentals of the desintegration of rocks ( the normal and the Weibull distribution were tested. The two-parametric Weibull distribution was tested. The basic characteristics of both distributions were evaluated for each set and the accordance of the model distribution with an experimental distribution was tested. The ÷2-test was used for testing. The two-parametric Weibull distribution was selected following the comparison of the test results of both model distributions as a suitable distribution model for the characterization of uniaxial compressive strength of the Ruskov andesite. The two-parametric Weibull distribution showed better results of the goodness-of-fit test. The normal distribution was suitable for two sets; one of the sets showed a negative result of the goodness-of-fit testing. At the uniaxial compressive strength of the Ruskov andesite, a scale effect was registered : the mean value of uniaxial compressive strength decreases with increasing the specimen base edge. This is another argument for using the Weibull distribution as a suitable statistical model of the

  19. Global model for the lithospheric strength and effective elastic thickness

    Tesauro, Magdala; Kaban, Mikhail K.; Cloetingh, Sierd A. P. L.

    2013-08-01

    Global distribution of the strength and effective elastic thickness (Te) of the lithosphere are estimated using physical parameters from recent crustal and lithospheric models. For the Te estimation we apply a new approach, which provides a possibility to take into account variations of Young modulus (E) within the lithosphere. In view of the large uncertainties affecting strength estimates, we evaluate global strength and Te distributions for possible end-member 'hard' (HRM) and a 'soft' (SRM) rheology models of the continental crust. Temperature within the lithosphere has been estimated using a recent tomography model of Ritsema et al. (2011), which has much higher horizontal resolution than previous global models. Most of the strength is localized in the crust for the HRM and in the mantle for the SRM. These results contribute to the long debates on applicability of the "crème brulée" or "jelly-sandwich" model for the lithosphere structure. Changing from the SRM to HRM turns most of the continental areas from the totally decoupled mode to the fully coupled mode of the lithospheric layers. However, in the areas characterized by a high thermal regime and thick crust, the layers remain decoupled even for the HRM. At the same time, for the inner part of the cratons the lithospheric layers are coupled in both models. Therefore, rheological variations lead to large changes in the integrated strength and Te distribution in the regions characterized by intermediate thermal conditions. In these areas temperature uncertainties have a greater effect, since this parameter principally determines rheological behavior. Comparison of the Te estimates for both models with those determined from the flexural loading and spectral analysis shows that the 'hard' rheology is likely applicable for cratonic areas, whereas the 'soft' rheology is more representative for young orogens.

  20. The relationship between compressive strength and flexural strength of pavement geopolymer grouting material

    Zhang, L.; Han, X. X.; Ge, J.; Wang, C. H.

    2018-01-01

    To determine the relationship between compressive strength and flexural strength of pavement geopolymer grouting material, 20 groups of geopolymer grouting materials were prepared, the compressive strength and flexural strength were determined by mechanical properties test. On the basis of excluding the abnormal values through boxplot, the results show that, the compressive strength test results were normal, but there were two mild outliers in 7days flexural strength test. The compressive strength and flexural strength were linearly fitted by SPSS, six regression models were obtained by linear fitting of compressive strength and flexural strength. The linear relationship between compressive strength and flexural strength can be better expressed by the cubic curve model, and the correlation coefficient was 0.842.

  1. Creep Strength of Nb-1Zr for SP-100 Applications

    Horak, James A.; Egner, Larry K.

    1994-07-01

    Power systems that are used to provide electrical power in space are designed to optimize conversion of thermal energy to electrical energy and to minimize the mass and volume that must be launched. Only refractory metals and their alloys have sufficient long-term strength for several years of uninterrupted operation at the required temperatures of 1200 K and above. The high power densities and temperatures at which these reactors must operate require the use of liquid-metal coolants. The alloy Nb-1 wt % Zr (Nb-lZr), which exhibits excellent corrosion resistance to alkali liquid-metals at high temperatures, is being considered for the fuel cladding, reactor structural, and heat-transport systems for the SP-100 reactor system. Useful lifetime of this system is limited by creep deformation in the reactor core. Nb-lZr sheet procured to American Society for Testing and Materials (ASTM) specifications for reactor grade and commercial grade has been processed by several different cold work and annealing treatments to attempt to produce the grain structure (size, shape, and distribution of sizes) that provides the maximum creep strength of this alloy at temperatures from 1250 to 1450 K. The effects of grain size, differences in oxygen concentrations, tungsten concentrations, and electron beam and gas tungsten arc weldments on creep strength were studied. Grain size has a large effect on creep strength at 1450 K but only material with a very large grain size (150 μm) exhibits significantly higher creep strength at 1350 K. Differences in oxygen or tungsten concentrations did not affect creep strength, and the creep strengths of weldments were equal to, or greater than, those for base metal.

  2. Experimental approach for adhesion strength of ATF cladding

    Kim, Donghyun; Kim, Hyochan; Yang, Yongsik; In, Wangkee [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Kim, Haksung [Hanyang University, Seoul (Korea, Republic of)

    2016-10-15

    The quality of a coating depends on the quality of its adhesion bond strength between the coating and the underlying substrate. Therefore, it is essential to evaluate the adhesion properties of the coating. There are many available test methods for the evaluation of coatings adhesion bond strength. Considering these restrictions of the coated cladding, the scratch test is useful for evaluation of adhesion properties compared to other methods. The purpose of the present study is to analyze the possibility of adhesion bond strength evaluation of ATF coated cladding by scratch testing on coatings cross sections. Experimental approach for adhesion strength of ATF coated cladding was investigated in the present study. The scratch testing was chosen as a testing method. Uncoated zircaloy-4 tube was employed as a reference and plasma spray and arc ion coating were selected as a ATF coated claddings for comparison. As a result, adhesion strengths of specimens affect the measured normal and tangential forces. For the future, the test will be conducted for CrAl coated cladding by laser coating, which is the most promising ATF cladding. Computational analysis with finite element method will also be conducted to analyze a stress distribution in the cladding tube.

  3. Effect of technological parameters and microstructure on mechanical strength of UO2 fuel pellets

    Radford, K.

    1980-01-01

    The effect of various peculiarities of tablet microstructure namely, sammury porosity (tablet density), grain size and pore distribution over sizes on technological parameters, is studied. It is shown that density decrease leads to a fast reduction of UO 2 tablet strength. The maximum effect on strength is produced by pore distribution over sizes, characterized by a median size, and not by the grain size, though a combined effect of those two factors is also observed. The important role of the technology of tablet production manifests itself in the fact that all operations bringing about the increase of pore or grain sizes leads to a reduction of strength. Such factors as powder origin, granule sizes, U 3 O 8 content and the amount of additions do not cause any considerable changes in the strength of tablets. Bend tests under conditions of biaxial loading should be considered as an ideal method of determining fuel tablets strength [ru

  4. Strength of mortar containing rubber tire particle

    Jusoh, M. A.; Abdullah, S. R.; Adnan, S. H.

    2018-04-01

    The main focus in this investigation is to determine the strength consist compressive and tensile strength of mortar containing rubber tire particle. In fact, from the previous study, the strength of mortar containing waste rubber tire in mortar has a slightly decreases compare to normal mortar. In this study, rubber tire particle was replacing on volume of fine aggregate with 6%. 9% and 12%. The sample were indicated M0 (0%), M6 (6%), M9 (9%) and M12 (12%). In this study, two different size of sample used with cube 100mm x 100mm x 100mm for compressive strength and 40mm x 40mm x 160mm for flexural strength. Morphology test was conducted by using Scanning electron microscopic (SEM) were done after testing compressive strength test. The concrete sample were cured for day 3, 7 and 28 before testing. Results compressive strength and flexural strength of rubber mortar shown improved compare to normal mortar.

  5. optimizing compressive strength characteristics of hollow building

    eobe

    Keywords: hollow building Blocks, granite dust, sand, partial replacement, compressive strength. 1. INTRODUCTION ... exposed to extreme climate. The physical ... Sridharan et al [13] conducted shear strength studies on soil-quarry dust.

  6. Elastic buckling strength of corroded steel plates

    structural safety assessment of corroded structures, residual strength should be ... Rahbar-Ranji (2001) has proposed a spectrum for random simulation of ... The main aim of the present work is to investigate the buckling strength of simply ...

  7. CADDIS Volume 2. Sources, Stressors and Responses: Ionic Strength

    Introduction to the ionic strength module, when to list ionic strength as a candidate cause, ways to measure ionic strength, simple and detailed conceptual diagrams for ionic strength, ionic strength module references and literature reviews.

  8. Investigation of the Photon Strength Function in 130 Te

    Isaak, J.; Beller, J.; Fiori, E.; Glorius, J.; Krtička, M.; Löher, B.; Pietralla, N.; Romig, C.; Rusev, G.; Savran, D.; Scheck, M.; Silva, J.; Sonnabend, K.; Tonchev, A. P.; Tornow, W.; Weller, H. R.; Zweidinger, M.

    2016-01-01

    The dipole strength distribution of 130Te was investigated with the method of Nuclear Resonance Fluorescence using continuous-energy bremsstrahlung at the Darmstadt High Intensity Photon Setup and quasi-monoenergetic photons at the High Intensity γ-Ray Source. The average decay properties were determined between 5.50 and 8.15 MeV and compared to simulations within the statistical model.

  9. Deformation localization and cyclic strength in polycrystalline molybdenum

    Sidorov, O.T.; Rakshin, A.F.; Fenyuk, M.I.

    1983-06-01

    Conditions of deformation localization and its interrelation with cyclic strength in polycrystalline molybdenum were investigated. A fatigue failure of polycrystalline molybdenum after rolling and in an embrittled state reached by recrystallization annealing under cyclic bending at room temperature takes place under nonuniform distribution of microplastic strain resulting in a temperature rise in separate sections of more than 314 K. More intensive structural changes take place in molybdenum after rolling than in recrystallized state.

  10. Strength analysis of PGV-1000M steam generator support

    Dubik, Ya.R.; Ageev, S.M.; Orynyak, I.V.; Vasilchenko, B.M.

    2017-01-01

    The paper presents the design of PGV-1000M steam generator support. It is shown that the load in the rolling support is distributed extremely unevenly, which is associated with the compliance of the support construction. It is demonstrated that under working loads only several rollers are used, the stresses in which exceed the yield strength. This can be an additional loading factor to be considered in the analysis of welding No. 111 failure.

  11. The tensile strength of mechanical joint prototype of lontar fiber composite

    Bale, Jefri; Adoe, Dominggus G. H.; Boimau, Kristomus; Sakera, Thomas

    2018-03-01

    In the present study, an experimental activity has been programmed to investigate the effect of joint prototype configuration on tensile strength of lontar (Borassus Flabellifer) fiber composite. To do so, a series of tests were conducted to establish the tensile strength of different joint prototype configuration specimen of lontar fiber composite. In addition, post observation of macroscope was used to map damage behavior. The analysis of lontar fiber composite is a challenge since the material has limited information than others natural fiber composites materials. The results shown that, under static tensile loading, the tensile strength of 13 MPa produced by single lap joint of lontar fiber composite is highest compare to 11 MPa of tensile strength generated by step lap joint and double lap joint where produced the lowest tensile strength of 6 MPa. It is concluded that the differences of tensile strength depend on the geometric dimensions of the cross-sectional area and stress distribution of each joint prototype configuration.

  12. Strengths and Satisfaction across the Adult Lifespan

    Isaacowitz, Derek M.; Vaillant, George E.; Seligman, Martin E. P.

    2003-01-01

    Positive psychology has recently developed a classification of human strengths (Peterson & Seligman, in press). We aimed to evaluate these strengths by investigating the strengths and life satisfaction in three adult samples recruited from the community (young adult, middle-aged, and older adult), as well as in the surviving men of the Grant study…

  13. Relationship between the edgewise compression strength of ...

    The results of this study were used to determine the linear regression constants in the Maltenfort model by correlating the measured board edgewise compression strength (ECT) with the predicted strength, using the paper components' compression strengths, measured with the short-span compression test (SCT) and the ...

  14. Strength of Ship Plates under Combined Loading

    Cui, W.; Wang, Y.; Pedersen, Preben Terndrup

    2002-01-01

    Strength of ship plates plays a significant role in the ultimate strength analysis of ship structures. In recent years several authors have proposed simplified analytical methods to calculate the ultimate strength of unstiffened plates. The majority of these investigations deal with plates subjec...

  15. Strength of ship plates under combined loading

    Cui, Weiching; Wang, Yongjun; Pedersen, Preben Terndrup

    2000-01-01

    Strength of ship plates plays a significant role for the ultimate strength analysis of ship structures. In recent years several authors have proposed simplified methods to calculate the ultimate strength of unstiffened plates. The majority of these investigations deal with plates subjected to lon...

  16. Octanol-water distribution of engineered nanomaterials.

    Hristovski, Kiril D; Westerhoff, Paul K; Posner, Jonathan D

    2011-01-01

    The goal of this study was to examine the effects of pH and ionic strength on octanol-water distribution of five model engineered nanomaterials. Distribution experiments resulted in a spectrum of three broadly classified scenarios: distribution in the aqueous phase, distribution in the octanol, and distribution into the octanol-water interface. Two distribution coefficients were derived to describe the distribution of nanoparticles among octanol, water and their interface. The results show that particle surface charge, surface functionalization, and composition, as well as the solvent ionic strength and presence of natural organic matter, dramatically impact this distribution. Distributions of nanoparticles into the interface were significant for nanomaterials that exhibit low surface charge in natural pH ranges. Increased ionic strengths also contributed to increased distributions of nanoparticle into the interface. Similarly to the octanol-water distribution coefficients, which represent a starting point in predicting the environmental fate, bioavailability and transport of organic pollutants, distribution coefficients such as the ones described in this study could help to easily predict the fate, bioavailability, and transport of engineered nanomaterials in the environment.

  17. Cobalt: for strength and color

    Boland, Maeve A.; Kropschot, S.J.

    2011-01-01

    Cobalt is a shiny, gray, brittle metal that is best known for creating an intense blue color in glass and paints. It is frequently used in the manufacture of rechargeable batteries and to create alloys that maintain their strength at high temperatures. It is also one of the essential trace elements (or "micronutrients") that humans and many other living creatures require for good health. Cobalt is an important component in many aerospace, defense, and medical applications and is a key element in many clean energy technologies. The name cobalt comes from the German word kobold, meaning goblin. It was given this name by medieval miners who believed that troublesome goblins replaced the valuable metals in their ore with a substance that emitted poisonous fumes when smelted. The Swedish chemist Georg Brandt isolated metallic cobalt-the first new metal to be discovered since ancient times-in about 1735 and identified some of its valuable properties.

  18. High-strength beryllium block

    Pinto, N.P.; Keith, G.H.

    1977-01-01

    Beryllium billets hot isopressed using fine powder of high purity have exceptionally attractive properties; average tensile ultimate, 0.2% offset yield strength and elongation are 590 MPa, 430 MPa and 4.0% respectively. Properties are attributed to the fine grain size (about 4.0 μm average diameter) and the relatively low levels of BeO present as fine, well-dispersed particles. Dynamic properties, e.g., fracture toughness, are similar to those of standard grade, high-purity beryllium. The modulus of beryllium is retained to very high stress levels, and the microyield stress or precision elastic limit is higher than for other grades, including instrument grades. Limited data for billets made from normal-purity fine powders show similar room temperature properties. (author)

  19. Swimbladder on Fish Target Strength

    Sunardi

    2008-08-01

    Full Text Available This paper discusses of target strength (TS for the Selar boops (Oxeye scad and Megalaspis cordyla (Torpedo scad, the most commercially fish in Malaysia. TS can be determined from in situ measurements and acoustic calculation of fish model. TS value, depth, and position (x-y-z of targeted fish can be viewed from echogram using FQ-80 Analyzer by in situ measurement. X-ray imaged can be deployed to develop the acoustic fish model. The percentage of length and upper surface area for swimbladder to body fish of Selar boops more than Megalaspis cordyla can be measured after X-ray process. The percentage of width and volume of swimbladders to its each body are no significantly difference for both fish. These data of swimbladder physic support the result of in situ measurement which TS of Megalaspis cordyla stronger Selar boops.

  20. Preparation, mechanical strengths, and thermal

    Inoue, A.; Furukawa, S.; Hagiwara, M.; Masumoto, T.

    1987-05-01

    Ni-based amorphous wires with good bending ductility have been prepared for Ni75Si8B17 and Ni78P12B10 alloys containing 1 to 2 at. pct Al or Zr by melt spinning in rotating water. The enhancement of the wire-formation tendency by the addition of Al has been clarified to be due to the increase in the stability of the melt jet through the formation of a thin A12O3 film on the outer surface. The maximum wire diameter is about 190 to 200 μm for the Ni-Si (or P)-B-Al alloys and increases to about 250 μm for the Ni-Si-B-Al-Cr alloys containing 4 to 6 at. pct Cr. The tensile fracture strength and fracture elongation are 2730 MPa and 2.9 pct for (Ni0.75Si0.08B0.17 99Al1) wire and 2170 MPa and 2.4 pct for (Ni0.78P0.12B0.1)99Al1 wire. These wires exhibit a fatigue limit under dynamic bending strain in air with a relative humidity of 65 pct; this limit is 0.50 pct for a Ni-Si-B-Al wire, which is higher by 0.15 pct than that of a Fe75Si10B15 amorphous wire. Furthermore, the Ni-base wires do not fracture during a 180-deg bending even for a sample annealed at temperatures just below the crystallization temperature, in sharp contrast to high embrittlement tendency for Fe-base amorphous alloys. Thus, the Ni-based amorphous wires have been shown to be an attractive material similar to Fe- and Co-based amorphous wires because of its high static and dynamic strength, high ductility, high stability to thermal embrittlement, and good corrosion resistance.

  1. Association Between Maximal Bench Press Strength and Isometric Handgrip Strength Among Breast Cancer Survivors.

    Rogers, Benjamin H; Brown, Justin C; Gater, David R; Schmitz, Kathryn H

    2017-02-01

    To characterize the relationship between 1-repetition maximum (1-RM) bench press strength and isometric handgrip strength among breast cancer survivors. Cross-sectional study. Laboratory. Community-dwelling breast cancer survivors (N=295). Not applicable. 1-RM bench press strength was measured with a barbell and exercise bench. Isometric handgrip strength was measured using an isometric dynamometer, with 3 maximal contractions of the left and right hands. All measures were conducted by staff with training in clinical exercise testing. Among 295 breast cancer survivors, 1-RM bench press strength was 18.2±6.1kg (range, 2.2-43.0kg), and isometric handgrip strength was 23.5±5.8kg (range, 9.0-43.0kg). The strongest correlate of 1-RM bench press strength was the average isometric handgrip strength of both hands (r=.399; Pisometric handgrip strength of both hands overestimated 1-RM bench press strength by 4.7kg (95% limits of agreement, -8.2 to 17.6kg). In a multivariable linear regression model, the average isometric handgrip strength of both hands (β=.31; Pstrength (R 2 =.23). Isometric handgrip strength is a poor surrogate for 1-RM bench press strength among breast cancer survivors. 1-RM bench press strength and isometric handgrip strength quantify distinct components of muscular strength. Copyright © 2016 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

  2. Reference Values of Grip Strength, Prevalence of Low Grip Strength, and Factors Affecting Grip Strength Values in Chinese Adults.

    Yu, Ruby; Ong, Sherlin; Cheung, Osbert; Leung, Jason; Woo, Jean

    2017-06-01

    The objectives of this study were to update the reference values of grip strength, to estimate the prevalence of low grip strength, and to examine the impact of different aspects of measurement protocol on grip strength values in Chinese adults. A cross-sectional survey of Chinese men (n = 714) and women (n = 4014) aged 18-102 years was undertaken in different community settings in Hong Kong. Grip strength was measured with a digital dynamometer (TKK 5401 Grip-D; Takei, Niigata, Japan). Low grip strength was defined as grip strength 2 standard deviations or more below the mean for young adults. The effects of measurement protocol on grip strength values were examined in a subsample of 45 men and women with repeated measures of grip strength taken with a hydraulic dynamometer (Baseline; Fabrication Enterprises Inc, Irvington, NY), using pair t-tests, intraclass correlation coefficient, and Bland and Altman plots. Grip strength was greater among men than among women (P values than the Baseline hydraulic dynamometer (P values were also observed when the measurement was performed with the elbow extended in a standing position, compared with that with the elbow flexed at 90° in a sitting position, using the same dynamometer (P values of grip strength and estimated the prevalence of low grip strength among Chinese adults spanning a wide age range. These findings might be useful for risk estimation and evaluation of interventions. However, grip strength measurements should be interpreted with caution, as grip strength values can be affected by type of dynamometer used, assessment posture, and elbow position. Copyright © 2017 AMDA – The Society for Post-Acute and Long-Term Care Medicine. Published by Elsevier Inc. All rights reserved.

  3. Distributional Inference

    Kroese, A.H.; van der Meulen, E.A.; Poortema, Klaas; Schaafsma, W.

    1995-01-01

    The making of statistical inferences in distributional form is conceptionally complicated because the epistemic 'probabilities' assigned are mixtures of fact and fiction. In this respect they are essentially different from 'physical' or 'frequency-theoretic' probabilities. The distributional form is

  4. The Importance of Muscular Strength: Training Considerations.

    Suchomel, Timothy J; Nimphius, Sophia; Bellon, Christopher R; Stone, Michael H

    2018-04-01

    This review covers underlying physiological characteristics and training considerations that may affect muscular strength including improving maximal force expression and time-limited force expression. Strength is underpinned by a combination of morphological and neural factors including muscle cross-sectional area and architecture, musculotendinous stiffness, motor unit recruitment, rate coding, motor unit synchronization, and neuromuscular inhibition. Although single- and multi-targeted block periodization models may produce the greatest strength-power benefits, concepts within each model must be considered within the limitations of the sport, athletes, and schedules. Bilateral training, eccentric training and accentuated eccentric loading, and variable resistance training may produce the greatest comprehensive strength adaptations. Bodyweight exercise, isolation exercises, plyometric exercise, unilateral exercise, and kettlebell training may be limited in their potential to improve maximal strength but are still relevant to strength development by challenging time-limited force expression and differentially challenging motor demands. Training to failure may not be necessary to improve maximum muscular strength and is likely not necessary for maximum gains in strength. Indeed, programming that combines heavy and light loads may improve strength and underpin other strength-power characteristics. Multiple sets appear to produce superior training benefits compared to single sets; however, an athlete's training status and the dose-response relationship must be considered. While 2- to 5-min interset rest intervals may produce the greatest strength-power benefits, rest interval length may vary based an athlete's training age, fiber type, and genetics. Weaker athletes should focus on developing strength before emphasizing power-type training. Stronger athletes may begin to emphasize power-type training while maintaining/improving their strength. Future research should

  5. Traditional versus functional strength training: Effects on muscle strength and power in the elderly

    Seiler, Hilde Lohne; Torstveit, Monica Klungland; Anderssen, Sigmund A.

    2013-01-01

    Published versiom of an article in the journal:Journal of Aging and Physical Activity. Also available from Human Kinetics: http://http://journals.humankinetics.com/japa-back-issues/japa-volume-21-issue-1-january/traditional-versus-functional-strength-training-effects-on-muscle-strength-and-power-in-the-elderly The aim was to determine whether strength training with machines vs. functional strength training at 80% of one-repetition maximum improves muscle strength and power among the elderl...

  6. Microstructure of high-strength foam concrete

    Just, A.; Middendorf, B.

    2009-01-01

    Foam concretes are divided into two groups: on the one hand the physically foamed concrete is mixed in fast rotating pug mill mixers by using foaming agents. This concrete cures under atmospheric conditions. On the other hand the autoclaved aerated concrete is chemically foamed by adding aluminium powder. Afterwards it is cured in a saturated steam atmosphere. New alternatives for the application of foam concretes arise from the combination of chemical foaming and air curing in manufacturing processes. These foam concretes are new and innovative building materials with interesting properties: low mass density and high strength. Responsible for these properties are the macro-, meso- and microporosity. Macropores are created by adding aluminium powder in different volumes and with different particle size distributions. However, the microstructure of the cement matrix is affected by meso- and micropores. In addition, the matrix of the hardened cement paste can be optimized by the specific use of chemical additives for concrete. The influence of aluminium powder and chemical additives on the properties of the microstructure of the hardened cement matrices were investigated by using petrographic microscopy as well as scanning electron microscopy.

  7. Isometric shoulder strength in young swimmers.

    McLaine, Sally J; Ginn, Karen A; Fell, James W; Bird, Marie-Louise

    2018-01-01

    The prevalence of shoulder pain in young swimmers is high. Shoulder rotation strength and the ratio of internal to external rotation strength have been reported as potential modifiable risk factors associated with shoulder pain. However, relative strength measures in elevated positions, which include flexion and extension, have not been established for the young swimmer. The aim of this study was to establish clinically useful, normative shoulder strength measures and ratios for swimmers (14-20 years) without shoulder pain. Cross-sectional, observational study. Swimmers (N=85) without a recent history of shoulder pain underwent strength testing of shoulder flexion and extension (in 140° abduction); and internal and external rotation (in 90° abduction). Strength tests were performed in supine using a hand-held dynamometer and values normalised to body weight. Descriptive statistics were calculated for strength and strength ratios (flexion:extension and internal:external rotation). Differences between groups (based on gender, history of pain, test and arm dominance) were explored using independent and paired t tests. Normative shoulder strength values and ratios were established for young swimmers. There was a significant difference (pdifferences in strength ratios. Relative strength of the dominant and non-dominant shoulders (except for extension); and for swimmers with and without a history of shoulder pain was not significantly different. A normal shoulder strength profile for the young swimmer has been established which provides a valuable reference for the clinician assessing shoulder strength in this population. Copyright © 2017 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

  8. Efeitos do treino e do destreino sobre indicadores de força em jovens voleibolistas: implicações da distribuição do volume Training and detraining effects on strength parameters in young volleyball players: volume distribution implications

    Mário C. Marques

    2011-06-01

    Full Text Available O objetivo do presente estudo foi comparar os efeitos do treino de força (TF e do respectivo destreinamento entre dois modelos de periodização do volume (linear - ML; não linear - MNL em jovens voleibolistas. A amostra foi composta por 12 jovens do sexo masculino jogadores de voleibol (17.1 ± 0.5 anos, divididos em dois grupos homogêneos. Os resultados sugerem que 8 semanas de TF induzem modificações significativas nos indicadores da força, independentemente do modelo de periodização utilizado. Contudo, o MNL parece menos eficaz no desenvolvimento da força explosiva em habilidades motoras específicas (salto vertical. Os resultados indicam que 4 semanas de destreinamento são suficientes para provocarem perdas significas na força muscular em jovens voleibolistas. O destreinamento de um ML induz a perdas significativas na força explosiva do trem superior (lançamento de bola medicinal e inferior (salto vertical, enquanto que no MNL parece diminuir significativamente a força dinâmica máxima (supino e o desempenho no salto vertical.This study aimed to compare the effects of strength training (ST and detraining (DT of two volume periodization models (linear - LM; non linear - NLM in young male volleyball players. 12 volleyball players (17.1±0.5 years old were randomly divided into two groups. The results of the present study suggest that 8 weeks of ST induce changes in the indicators of increased maximal strength and explosive strength, regardless of models used. However, the NLM seems less effective in the development of explosive strength in specific motor skills (vertical jump. As for DT, this study suggests that 4 weeks is sufficient to cause significant losses as an indicator of release between the two models of training. The LM induces significant losses in the explosive strength of the upper (medicine ball throwing and lower body (vertical jump, while the NLM suggests higher losses in the maximum strength (train top besides

  9. Triton beta decay

    Saito, T.Y.; Wu, Y.; Ishikawa, S.; Sasakawa, T.

    1990-01-01

    Triton β-decay has been calculated using wave functions for 3 He and 3 H obtained from (Coulomb-modified) Faddeev equations for various interactions. We get a value for the Gamow-Teller matrix element of √3 (0.962±0.002) without regards to two- or three-nucleon inteactions. This value agrees with the experimental value. (orig.)

  10. Low-energy Electro-weak Reactions

    Gazit, Doron

    2012-01-01

    Chiral effective field theory (EFT) provides a systematic and controlled approach to low-energy nuclear physics. Here, we use chiral EFT to calculate low-energy weak Gamow-Teller transitions. We put special emphasis on the role of two-body (2b) weak currents within the nucleus and discuss their applications in predicting physical observables.

  11. Searches for exotic interactions in nuclear beta decay

    Naviliat-Cuncic, O. [National Superconducting Cyclotron Laboratory and Department of Physics and Astronomy, Michigan State University, 640 S Shaw Lane, East Lansing MI 48824 (United States)

    2016-07-07

    This contribution presents current efforts in the search for exotic interactions in nuclear β decay using a calorimetric technique for the measurement of the β energy spectrum shape. We describe the criteria for the choice of sensitive candidates in Gamow-Teller transitions and present the status of measurements performed in {sup 6}He and {sup 20}F decay.

  12. Prof. Ikeda’s important contributions to nuclear physics

    Brink, D M

    2010-01-01

    Professor Ikeda has made many fundamental contributions to nuclear physics, especially to the theory of Gamow-Teller giant resonances, to nuclear cluster physics, to hypernuclear physics, and to the physics of neutron-rich nuclei. He also has played an important role in the education of young researchers in Japan and on the contacts between theoreticians and experimentalists.

  13. Configuration mixing for spin-isospin modes

    Ichimura, Munetake

    2005-01-01

    Development of theories of configuration mixing is reviewed, concentrating on their application to spin-isospin modes, especially to the Gamow-Teller transitions. This talk is divided into three historical stages, the first order configuration mixing as the first stage, the second order configuration mixing as the second stage, and the delta-isobar-hole mixing as the third stage

  14. The Association between Maximal Bench Press Strength and Isometric Handgrip Strength among Breast Cancer Survivors

    Rogers, Benjamin H.; Brown, Justin C.; Gater, David R.; Schmitz, Kathryn H.

    2016-01-01

    Objective One-repetition maximum (1-RM) bench press strength is considered the gold standard to quantify upper-body muscular strength. Isometric handgrip strength is frequently used as a surrogate for 1-RM bench press strength among breast cancer (BrCa) survivors. The relationship between 1-RM bench press strength and isometric handgrip strength, however, has not been characterized among BrCa survivors. Design Cross-sectional study. Setting Laboratory. Participants Community-dwelling BrCa survivors. Interventions Not applicable. Main Outcome Measure 1-RM bench press strength was measured with a barbell and exercise bench. Isometric handgrip strength was measured using an isometric dynamometer with three maximal contractions of left and right hands. All measures were conducted by staff with training in clinical exercise testing. Results Among 295 BrCa survivors, 1-RM bench press strength was 18.2±6.1 kg (range: 2.2-43.0) and isometric handgrip strength was 23.5±5.8 kg (range: 9.0-43.0). The strongest correlate of 1-RM bench press strength was the average isometric handgrip strength of both hands (r=0.399; Pisometric handgrip strength of both hands overestimated 1-RM bench press strength by 4.7 kg (95% limits of agreement: −8.2 to 17.6). In a multivariable linear regression model, the average isometric handgrip strength of both hands (β=0.31; Pstrength (R2=0.23). Conclusions Isometric handgrip strength is a poor surrogate for 1-RM bench press strength among BrCa survivors. 1-RM bench press and isometric handgrip strength quantify distinct components of muscular strength. PMID:27543047

  15. Experimental and simulated strength of spot welds

    Nielsen, Chris Valentin; Bennedbæk, Rune A.K.; Larsen, Morten B.

    2014-01-01

    Weld strength testing of single spots in DP600 steel is presented for the three typical testing procedures, i.e. tensile-shear, cross-tension and peel testing. Spot welds are performed at two sets of welding parameters and strength testing under these conditions is presented by load......-elongation curves revealing the maximum load and the elongation at break. Welding and strength testing is simulated by SORPAS® 3D, which allows the two processes to be prepared in a combined simulation, such that the simulated welding properties are naturally applied to the simulation of strength testing. Besides...... the size and shape of the weld nugget, these properties include the new strength of the material in the weld and the heat affected zone based on the predicted hardness resulting from microstructural phase changes simulated during cooling of the weld before strength testing. Comparisons between overall...

  16. Elastic stability and the limit of strength

    Morris Jr., J.W.; Krenn, C.R.; Roundy, D.; Cohen, Marvin L.

    2002-01-01

    The upper limit of strength (the ''theoretical strength'') has been an active subject of research and speculation for the better part of a century. The subject has recently become important, for two reasons. First, given recent advances in ab initio techniques and computing machines, the limits of strength can be calculated with considerable accuracy, making this one of the very few problems in mechanical behavior that can actually be solved. Second, given recent advances in materials engineering, the limits of strength are being approached in some systems, such as hardened or defect-free films, and their relevance is becoming recognized in others. The present paper discusses some interesting results from recent research on the limits of strength, with an intermixture of speculations based on those results. Topics include the inherent nature of {100} cleavage and ''pencil slip'' in bcc metals, the inherent ductility of fcc metals, the anomalous properties of Al, and the possibility of measuring ideal strength with nanoindentation

  17. Prediction of concrete strength in massive structures

    Sakamoto, T.; Makino, H.; Nakane, S.; Kawaguchi, T.; Ohike, T.

    1989-01-01

    Reinforced concrete structures of a nuclear power plant are mostly of mass concrete with cross-sectional dimensions larger than 1.0 m. The temperature of concrete inside after placement rises due to heat of hydration of cement. It is well known that concrete strengths of mass concrete structure subjected to such temperature hysteresis are generally not equal to strengths of cylinders subjected to standard curing. In order to construct a mass concrete structure of high reliability in which the specified concrete strength is satisfied by the specified age, it is necessary to have a thorough understanding of the strength gain property of concrete in the structure and its relationships with the water-cement ratio of the mix, strength of standard-cured cylinders and the internal temperature hysteresis. This report describes the result of studies on methods of controlling concrete strength in actual construction projects

  18. Experimental knee pain reduces muscle strength

    Henriksen, Marius; Mortensen, Sara Rosager; Aaboe, Jens

    2011-01-01

    Pain is the principal symptom in knee pathologies and reduced muscle strength is a common observation among knee patients. However, the relationship between knee joint pain and muscle strength remains to be clarified. This study aimed at investigating the changes in knee muscle strength following...... experimental knee pain in healthy volunteers, and if these changes were associated with the pain intensities. In a crossover study, 18 healthy subjects were tested on 2 different days. Using an isokinetic dynamometer, maximal muscle strength in knee extension and flexion was measured at angular velocities 0....... Knee pain reduced the muscle strength by 5 to 15% compared to the control conditions (P knee extension and flexion at all angular velocities. The reduction in muscle strength was positively correlated to the pain intensity. Experimental knee pain significantly reduced knee extension...

  19. The reliabilty of isokinetic strength measurement

    Kadlec, Miroslav

    2011-01-01

    Title: Reliability of isometric and isokinetic strength testing in the knee flexion and extension Objectives: To compare the reliability of isometric and isokinetic testing of the knee strength in flexion and extension Methods: I used intraclass correlation coefficient and Pearson's correlation coefficient. Results: I have discovered that the reliability measured on isokinetic and isometric dynamometer is high. Furthermore the reliability of the maximum strength measurement was higher with-us...

  20. Strength and failure modes of ceramic multilayers

    Sørensen, Bent F.; Toftegaard, Helmuth Langmaack; Linderoth, Søren

    2012-01-01

    A model was developed for the prediction of the tensile strength of thin, symmetric 3-layer sandwich specimens. The model predictions rationalize the effect of heat-treatment temperature on the strength of sandwich specimens consisting of an YSZ (Yttria-Stabilized Zirconia) substrate coated with ...... and propagating into the substrate. These predictions are consistent with microstructural observations of the fracture surfaces. A good agreement was found between the measured strength values and model predictions. © 2012 Elsevier Ltd. All rights reserved....

  1. Accounting for the Strengths of MNC Subsidiaries

    Forsgren, Mats; Pedersen, Torben; Foss, Nicolai Juul

    1999-01-01

    that organizational strength can to some extent be proxied by strength in the market place. Based on analysis of data on foreign-owned production firms in Denmark, we test three hypotheses: 1) that internal factors (capabilities, patents....) are positively related to the organizational strengths of MNC subsidiaries......This paper links up with recent work on the role of subsidiaries in multinational corporations as well as with recent work in the strategy and business network literature. We discuss the sources of organizational strengths of subsidiaries in the larger multinational corporation, and argue...

  2. Accelerated Strength Testing of Thermoplastic Composites

    Reeder, J. R.; Allen, D. H.; Bradley, W. L.

    1998-01-01

    Constant ramp strength tests on unidirectional thermoplastic composite specimens oriented in the 90 deg. direction were conducted at constant temperatures ranging from 149 C to 232 C. Ramp rates spanning 5 orders of magnitude were tested so that failures occurred in the range from 0.5 sec. to 24 hrs. (0.5 to 100,000 MPa/sec). Below 204 C, time-temperature superposition held allowing strength at longer times to be estimated from strength tests at shorter times but higher temperatures. The data indicated that a 50% drop in strength might be expected for this material when the test time is increased by 9 orders of magnitude. The shift factors derived from compliance data applied well to the strength results. To explain the link between compliance and strength, a viscoelastic fracture model was investigated. The model, which used compliance as input, was found to fit the strength data only if the critical fracture energy was allowed to vary with temperature reduced stress rate. This variation in the critical parameter severely limits its use in developing a robust time-dependent strength model. The significance of this research is therefore seen as providing both the indication that a more versatile acceleration method for strength can be developed and the evidence that such a method is needed.

  3. Poisson distribution

    Hallin, M.; Piegorsch, W.; El Shaarawi, A.

    2012-01-01

    The random variable X taking values 0,1,2,…,x,… with probabilities pλ(x) = e−λλx/x!, where λ∈R0+ is called a Poisson variable, and its distribution a Poisson distribution, with parameter λ. The Poisson distribution with parameter λ can be obtained as the limit, as n → ∞ and p → 0 in such a way that

  4. Distributed Visualization

    National Aeronautics and Space Administration — Distributed Visualization allows anyone, anywhere, to see any simulation, at any time. Development focuses on algorithms, software, data formats, data systems and...

  5. Microstructure and tensile properties of high strength duplex ferrite-martensite (DFM) steels

    Chakraborti, P.C.; Mitra, M.K.

    2007-01-01

    Duplex ferrite-martensite (DFM) steels containing 38-80% martensite of varying morphologies were developed by batch intercritical annealing of a commercial variety vanadium bearing 0.2% C-Mn steel at different temperatures. Microstructures before intercritical annealing were found to control the morphological distribution of the phase constituents of the developed DFM steels. Tensile test results revealed best strength-ductility combination for finely distributed lamellar ferrite-martensite phase aggregate containing ∼60% martensite developed from a prior martensitic structure. Taking consideration of the modified law of mechanical mixture the experimental tensile strength data of the developed DFM steels has been formulated with some success and very good estimation for tensile strengths of pure ferrite and low carbon martensite has been made from tensile strength data of DFM steels

  6. The Strength Analysis of CFM56 Engine Blade

    Liu Zhenzhen

    2018-01-01

    Full Text Available Aero engine is a kind of thermodynamic machinery, which require have strict aerodynamic load, mechanical load and strong durability, its longevity depends largely on the life of its main components. In this paper, a series of studies are carried out on the strength of fan blades of CFM56 engine, which provide a reference value for improving the reliability of the engine. The finite element model of the engine fan is established by using CATIA’s finite element software.The centrifugal stress distribution of the fan at different speeds and the influence of torque on fans under different speeds are calculated respectively, and the static strength of the fan is checked.

  7. Bone strength and material properties of the glenoid

    Frich, Lars Henrik; Jensen, N.C.; Odgaard, A.

    1997-01-01

    of bone specimens harvested from the central part of the glenoid subchondral area. The elastic modulus varied from approximately 100 MPa at the glenoid bare area to 400 MPa at the superior part of the glenoid. With the elastic constants used a predictor of the mechanical anisotropy, the average anisotropy...... ratio was 5.2, indicating strong anisotropy. The apparent density was an average 0.35 gr. cm-3, and the Poisson ratio averaged 0.263. According to our findings the anisotropy of the glenoid cancellous bone, details concerning the strength distribution, and the load-bearing function of the cortical shell......The quality of the glenoid bone is important to a successful total shoulder replacement. Finite element models have been used to model the response of the glenoid bone to an implanted prosthesis. Because very little is known about the bone strength and the material properties at the glenoid...

  8. Compressive strength of brick masonry made with weak mortars

    Pedersen, Erik Steen; Hansen, Klavs Feilberg

    2013-01-01

    in the joint will ensure a certain level of load-carrying capacity. This is due to the interaction between compression in the weak mortar and tension in the adjacent bricks. This paper proposes an expression for the compressive strength of masonry made with weak lime mortars (fm... of masonry depends only on the strength of the bricks. A compression failure in masonry made with weak mortars occurs as a tension failure in the bricks, as they seek to prevent the mortar from being pressed out of the joints. The expression is derived by assuming hydrostatic pressure in the mortar joints......, which is the most unfavourable stress distribution with respect to tensile stresses in bricks. The expression is compared with the results of compression tests of masonry made with weak mortars. It can take into account bricks with arbitrary dimensions as well as perforated bricks. For a stronger mortar...

  9. Nanotechnology strength indicators: international rankings based on US patents

    Marinova, Dora; McAleer, Michael

    2003-01-01

    Technological strength indicators (TSIs) based on patent statistics for 1975-2000 are used to analyse patenting of nanotechnology in the USA, and to compile international rankings for the top 12 foreign patenting countries (namely Australia, Canada, France, Germany, Great Britain, Italy, Japan, Korea, the Netherlands, Sweden, Switzerland and Taiwan). As the indicators are not directly observable, various proxy variables are used, namely the technological specialization index for national priorities, patent shares for international presence, citation rate for the contribution of patents to knowledge development and rate of assigned patents for potential commercial benefits. The best performing country is France, followed by Japan and Canada. It is shown that expertise and strength in nanotechnology are not evenly distributed among the technologically advanced countries, with the TSIs revealing different emphases in the development of nanotechnology.

  10. The effects of surface finish and grain size on the strength of sintered silicon carbide

    You, Y. H.; Kim, Y. W.; Lee, J. G.; Kim, C. H.

    1985-01-01

    The effects of surface treatment and microstructure, especially abnormal grain growth, on the strength of sintered SiC were studied. The surfaces of sintered SiC were treated with 400, 800 and 1200 grit diamond wheels. Grain growth was induced by increasing the sintering times at 2050 C. The beta to alpha transformation occurred during the sintering of beta-phase starting materials and was often accompanied by abnormal grain growth. The overall strength distributions were established using Weibull statistics. The strength of the sintered SiC is limited by extrinsic surface flaws in normal-sintered specimens. The finer the surface finish and grain size, the higher the strength. But the strength of abnormal sintering specimens is limited by the abnormally grown large tabular grains. The Weibull modulus increases with decreasing grain size and decreasing grit size for grinding.

  11. Statistical characterization of tensile strengths for a nuclear-type core graphite

    Kennedy, C.R.; Eatherly, W.P.

    1986-09-01

    A data set of tensile strengths comprising over 1200 experimental points has been analyzed statistically in conformance with the observed phenomenon of background and disparate flaws. The data are consistent with a bimodal normal distribution. If corrections are made for strength dependence on density, the background mode is Weibull. It is proposed the disparate mode can be represented by a combination of binomial and order statistics. The resultant bimodal model would show a strong dependence on stress volume

  12. Electric Monopole Transition Strengths in the Stable Nickel Isotopes

    Evitts, Lee John

    A series of measurements of stable nickel isotopes were performed at the Australian National University in Canberra. Excited states in 58,60,62Ni were populated via inelastic scattering of proton beams delivered by the 14UD Pelletron accelerator. Multiple setups were used in order to determine the structure of low-lying states. The CAESAR array of Compton-suppressed HPGe detectors was used to measure the (E2/M1) mixing ratio of transitions from angular distributions of gamma rays. The Super-e spectrometer was used to measure conversion coefficients for a number of J to J transitions. The data obtained from both devices was combined with previously measured parent lifetimes and branching ratios to determine E0 transition strengths between J-pi transitions. The E0 transition strength for the second 0+ to first 0+ transitions in 60,62Ni have been measured for the first time through internal conversion electron detection. The experimental value of 132(+59,-70) for 62Ni agrees within 2 sigma of the previous result obtained from internal pair formation. However it is likely that the previous experimental results used an outdated theoretical model for internal pair formation emission. This work also represents the first measurements of E0 transition strengths between 2+ states in Ni isotopes. There is generally large E0 strength between the 2+ states, particularly in the second 2+ to first 2+ transition, however there is also a large uncertainty in the measurements owing to the difficulties involved in measuring conversion coefficients. In 62Ni, the E0 transition strength of 172(+62,-77) for the second 2+ to first 2+ transition gives further weight to the argument against the spherical vibrator model, as an E0 transition is forbidden if there is a change of only one phonon. The large measurement also indicates the presence of shape coexistence, complementing the recent experimental work carried out in the neutron-rich Ni isotopes.

  13. Dyadic distributions

    Golubov, B I

    2007-01-01

    On the basis of the concept of pointwise dyadic derivative dyadic distributions are introduced as continuous linear functionals on the linear space D d (R + ) of infinitely differentiable functions compactly supported by the positive half-axis R + together with all dyadic derivatives. The completeness of the space D' d (R + ) of dyadic distributions is established. It is shown that a locally integrable function on R + generates a dyadic distribution. In addition, the space S d (R + ) of infinitely dyadically differentiable functions on R + rapidly decreasing in the neighbourhood of +∞ is defined. The space S' d (R + ) of dyadic distributions of slow growth is introduced as the space of continuous linear functionals on S d (R + ). The completeness of the space S' d (R + ) is established; it is proved that each integrable function on R + with polynomial growth at +∞ generates a dyadic distribution of slow growth. Bibliography: 25 titles.

  14. The Relation between Degree and Strength in the Complex Network Derived from an Individual Stock

    Zelin Zhang

    2016-01-01

    Full Text Available A method based on coarse-graining to construct a directed weighted complex network which models the transformation of the trading data of an individual stock is introduced. The degree (strength distribution of derived network follows a power-law. A moderated regression equation with interaction effects of average return and out-degree (in-degree on out-strength (in-strength is established. Moreover, we found that the differences of nodes affect the network’s structure and average return level impacts nodes’ eigenvector centrality and pagerank, significantly.

  15. On dose distribution comparison

    Jiang, Steve B; Sharp, Greg C; Neicu, Toni; Berbeco, Ross I; Flampouri, Stella; Bortfeld, Thomas

    2006-01-01

    In radiotherapy practice, one often needs to compare two dose distributions. Especially with the wide clinical implementation of intensity-modulated radiation therapy, software tools for quantitative dose (or fluence) distribution comparison are required for patient-specific quality assurance. Dose distribution comparison is not a trivial task since it has to be performed in both dose and spatial domains in order to be clinically relevant. Each of the existing comparison methods has its own strengths and weaknesses and there is room for improvement. In this work, we developed a general framework for comparing dose distributions. Using a new concept called maximum allowed dose difference (MADD), the comparison in both dose and spatial domains can be performed entirely in the dose domain. Formulae for calculating MADD values for various comparison methods, such as composite analysis and gamma index, have been derived. For convenience in clinical practice, a new measure called normalized dose difference (NDD) has also been proposed, which is the dose difference at a point scaled by the ratio of MADD to the predetermined dose acceptance tolerance. Unlike the simple dose difference test, NDD works in both low and high dose gradient regions because it considers both dose and spatial acceptance tolerances through MADD. The new method has been applied to a test case and a clinical example. It was found that the new method combines the merits of the existing methods (accurate, simple, clinically intuitive and insensitive to dose grid size) and can easily be implemented into any dose/intensity comparison tool

  16. Revealing the Maximum Strength in Nanotwinned Copper

    Lu, L.; Chen, X.; Huang, Xiaoxu

    2009-01-01

    boundary–related processes. We investigated the maximum strength of nanotwinned copper samples with different twin thicknesses. We found that the strength increases with decreasing twin thickness, reaching a maximum at 15 nanometers, followed by a softening at smaller values that is accompanied by enhanced...

  17. Maximal Strength Testing in Healthy Children.

    Faigenbaum, Avery D.; Milliken, Laurie A.; Westcott, Wayne L.

    2003-01-01

    Evaluated the safety and efficacy of 1 repetition maximum (1RM) strength testing in healthy children age 6-12 years. Data were collected on 96 children who performed a 1RM test on one upper body and one lower body exercise using child-sized weight machines. Findings indicated that children could safely perform 1RM strength tests provided…

  18. Impact of Hydrodynamics on Oral Biofilm Strength

    Paramonova, E.; Kalmykowa, O. J.; van der Mei, H. C.; Busscher, H. J.; Sharma, P. K.

    2009-01-01

    Mechanical removal of oral biofilms is ubiquitously accepted as the best way to prevent caries and periodontal diseases. Removal effectiveness strongly depends on biofilm strength. To investigate the influence of hydrodynamics on oral biofilm strength, we grew single- and multi-species biofilms of

  19. Tools for Building on Youth Strengths

    Cox, Kathy

    2008-01-01

    While rhetoric about strength-based approaches abounds, this perspective has not penetrated the front lines of practice. Many programs serving troubled youngsters are still mired in a deficit and deviance orientation. This article provides practical strategies for assessing the strengths of children and developing interventions to tap their assets…

  20. Restorative Justice as Strength-Based Accountability

    Ball, Robert

    2003-01-01

    This article compares strength-based and restorative justice philosophies for young people and their families. Restorative justice provides ways to respond to crime and harm that establish accountability while seeking to reconcile members of a community. Restorative approaches are an important subset of strength-based interventions.

  1. Asymmetry of Muscle Strength in Elite Athletes

    Drid, Patrik; Drapsin, Miodrag; Trivic, Tatjana; Lukac, Damir; Obadov, Slavko; Milosevic, Zoran

    2009-01-01

    "Study aim": To determine muscle strength variables in elite judoists and wrestlers since thigh muscle strength and bilaterally balanced flexor-to-extensor ratio minimise injury risk and are desirable for achieving sport successes. "Material and methods": Judoists, wrestlers and untrained subjects, 10 each, were subjected to isokinetic strength…

  2. Gluebond strength of laser cut wood

    Charles W. McMillin; Henry A. Huber

    1985-01-01

    The degree of strength loss when gluing laser cut wood as compared to conventionally sawn wood and the amount of additional surface treatment needed to improve bond quality were assessed under normal furniture plant operating conditions. The strength of laser cut oak glued with polyvinyl acetate adhesive was reduced to 75 percent of sawn joints and gum was reduced 43...

  3. Enhancing paper strength by optimizing defect configuration

    J.M. Considine; W. Skye; W. Chen; D. Matthys; David W. Vahey; K. Turner; R. Rowlands

    2009-01-01

    Poor formation in paper, as denoted by large local variation of mass, tends to reduce maximum tensile strength but has not been well characterized. The effect of grammage variation on tensile strength was studied by introducing carefully placed holes in tensile specimens made of three different paper materials. Previous researchers demonstrated that the point-stress...

  4. Strength optimized designs of thermoelastic structures

    Pedersen, Pauli; Pedersen, Niels Leergaard

    2010-01-01

    For thermoelastic structures the same optimal design does not simultaneously lead to minimum compliance and maximum strength. Compliance may be a questionable objective and focus for the present paper is on the important aspect of strength, quantified as minimization of the maximum von Mises stre...... loads are appended....

  5. Nuclear threshold effects and neutron strength function

    Hategan, Cornel; Comisel, Horia

    2003-01-01

    One proves that a Nuclear Threshold Effect is dependent, via Neutron Strength Function, on Spectroscopy of Ancestral Neutron Threshold State. The magnitude of the Nuclear Threshold Effect is proportional to the Neutron Strength Function. Evidence for relation of Nuclear Threshold Effects to Neutron Strength Functions is obtained from Isotopic Threshold Effect and Deuteron Stripping Threshold Anomaly. The empirical and computational analysis of the Isotopic Threshold Effect and of the Deuteron Stripping Threshold Anomaly demonstrate their close relationship to Neutron Strength Functions. It was established that the Nuclear Threshold Effects depend, in addition to genuine Nuclear Reaction Mechanisms, on Spectroscopy of (Ancestral) Neutron Threshold State. The magnitude of the effect is proportional to the Neutron Strength Function, in their dependence on mass number. This result constitutes also a proof that the origins of these threshold effects are Neutron Single Particle States at zero energy. (author)

  6. Testosterone Replacement, Muscle Strength, and Physical Function

    You-Seon Nam

    2018-05-01

    Full Text Available Muscle strength and physical function decrease in older men, as do testosterone levels. Nonetheless, the effects of testosterone replacement therapy on muscle strength and physical function remain inconclusive and equivocal. We conducted a rapid systematic review, the results of which showed that testosterone replacement does not affect muscle strength (measured by hand grip strength and leg muscle strength, although it may increase physical function (measured by the 6-minute walk test, Physical Activity Scale for the Elderly score, and other physical performance tests. However, most of the studies were conducted in the United States or Europe and did not include participants from Asian or other ethnic backgrounds; therefore, further studies are needed to evaluate the effects of testosterone replacement in a broader population.

  7. Experimental knee joint pain during strength training and muscle strength gain in healthy subjects

    Sørensen, T J; Langberg, Henning; Hodges, P W

    2012-01-01

    Knee joint pain and reduced quadriceps strength are cardinal symptoms in many knee pathologies. In people with painful knee pathologies, quadriceps exercise reduces pain, improves physical function, and increases muscle strength. A general assumption is that pain compromises muscle function...... and thus may prevent effective rehabilitation. This study evaluated the effects of experimental knee joint pain during quadriceps strength training on muscle strength gain in healthy individuals....

  8. Percentage Level of Tannin fur Rabbit for Leather Concerning Stitch Tearing Strength, Tearing Strength and Flexibility

    Mustakim Mustakim; Aris Sri Widati; Lisa Purnaningtyas

    2012-01-01

    The purpose of this study was to find out the appropriate of tannin level for rabbit fur leather concerning stitch tearing strength, tearing strength, and flexibility. The result were expected to contribute good information for the society, leather craftsman, and further researchers about fur leather tanning especially rabbit fur leather with tannin concerning stitch tearing strength, tearing strength and flexibility. The material that used were 12 pieces of four months of rabbit skin. The re...

  9. Development of K-Basin High-Strength Homogeneous Sludge Simulants and Correlations Between Unconfined Compressive Strength and Shear Strength

    Onishi, Yasuo; Baer, Ellen BK; Chun, Jaehun; Yokuda, Satoru T.; Schmidt, Andrew J.; Sande, Susan; Buchmiller, William C.

    2011-02-20

    K-Basin sludge will be stored in the Sludge Transport and Storage Containers (STSCs) at an interim storage location on Central Plateau before being treated and packaged for disposal. During the storage period, sludge in the STSCs may consolidate/agglomerate, potentially resulting in high-shear-strength material. The Sludge Treatment Project (STP) plans to use water jets to retrieve K-Basin sludge after the interim storage. STP has identified shear strength to be a key parameter that should be bounded to verify the operability and performance of sludge retrieval systems. Determining the range of sludge shear strength is important to gain high confidence that a water-jet retrieval system can mobilize stored K-Basin sludge from the STSCs. The shear strength measurements will provide a basis for bounding sludge properties for mobilization and erosion. Thus, it is also important to develop potential simulants to investigate these phenomena. Long-term sludge storage tests conducted by Pacific Northwest National Laboratory (PNNL) show that high-uranium-content K-Basin sludge can self-cement and form a strong sludge with a bulk shear strength of up to 65 kPa. Some of this sludge has 'paste' and 'chunks' with shear strengths of approximately 3-5 kPa and 380-770 kPa, respectively. High-uranium-content sludge samples subjected to hydrothermal testing (e.g., 185 C, 10 hours) have been observed to form agglomerates with a shear strength up to 170 kPa. These high values were estimated by measured unconfined compressive strength (UCS) obtained with a pocket penetrometer. Due to its ease of use, it is anticipated that a pocket penetrometer will be used to acquire additional shear strength data from archived K-Basin sludge samples stored at the PNNL Radiochemical Processing Laboratory (RPL) hot cells. It is uncertain whether the pocket penetrometer provides accurate shear strength measurements of the material. To assess the bounding material strength and

  10. Detection of rock strength at Branisko massif

    Lazarová Edita

    2000-09-01

    Full Text Available When monitoring and optimizing the driving proces of the exploratory gallery by a computer system, conditions for verification of the interaction between desintegrating head of driving machine and rock massif were created. One of the output values of this mathematical model is the model strength at a simple pressure ótlH, which is defined as a pressure at the discus and the massif contact during the desintigration (a near limit of massif strength. By geological and geological engineering exploration, the section of length 2340 m was divided into fourty-two geological sections and five quasi-homogeneous massif enviroments. In the article, results of scleroscopic strength óCI , the strength in a simple pressure determined from the point load test and the strength at simple pressure ótlH are confronted . The main advance of the electronic geomechanical monitoring is the density of gained information. The two-seconds sample period of input and output data during the driving process makes it possible to describe driving circumstances in an almost continual way for each millimeter of the built tunnel. Then the information about changes of disintegrated rock properties, have the same density (frequency. By comparing a quantity of data gained by examining the index of point strength, scleroscopic strength and the model strength in a simple pressure from the monitoring process of driving process it is obvious that during the driving of exploratory gallery of motorway tunnel Branisko, a proportion of data number from the three “type examinations” of strength was reached and it was approximately 1:7:5000. Approximately in the same proportion, there were determined values for the 42 geologic sections (I. – XLII., which were defined in detail by the geologic, engineering geologic, hydrogeologic and geotechnic research.. The presented quantity values of presented rock mass strength for each geologic section are presented by their arithmetic average

  11. The Character Strengths of Class Clowns

    Willibald F. Ruch

    2014-09-01

    Full Text Available Class clowns traditionally were studied as a type concept and identified via sociometric procedures. In the present study a variable-centered approach was favored and class clown behaviors were studied in the context of character strengths, orientations to happiness and satisfaction with life. A sample of 672 Swiss children and adolescents filled in an 18 item self-report instrument depicting class clown behaviors. A hierarchical model of class clown behaviors was developed distinguishing a general factor and the four positively correlated dimensions of identified as a class clown, comic talent, disruptive rule-breaker, and subversive joker. Analysis of the general factor showed that class clowns were primarily male, and tended to be seen as class clowns by the teacher. Analyses of the 24 character strengths of the VIA-Youth (Park & Peterson, 2006 showed that class clowns were high in humor and leadership, and low in strengths like prudence, self-regulation, modesty, honesty, fairness, perseverance, and love of learning. An inspection of signature strengths revealed that 75% of class clowns had humor as a signature strength. Furthermore, generally class clown behaviors were shown by students indulging in a life of pleasure, but low life of engagement. The four dimensions yielded different character strengths profiles. While all dimensions of class clowns behaviors were low in temperance strengths, the factors identified as the class clown and comic talent were correlated with leadership strengths and the two negative factors (disruptive rule-breaker, subversive joker were low in other directed strengths. The disruptive rule breaking class clown was additionally low in intellectual strengths. While humor predicted life satisfaction, class clowning tended to go along with diminished satisfaction with life. It is concluded that different types of class clowns need to be kept apart and need different attention by teachers.

  12. The character strengths of class clowns.

    Ruch, Willibald; Platt, Tracey; Hofmann, Jennifer

    2014-01-01

    Class clowns traditionally were studied as a type concept and identified via sociometric procedures. In the present study a variable-centered approach was favored and class clown behaviors were studied in the context of character strengths, orientations to happiness and satisfaction with life. A sample of 672 Swiss children and adolescents filled in an 18 item self-report instrument depicting class clown behaviors. A hierarchical model of class clown behaviors was developed distinguishing a general factor and the four positively correlated dimensions of "identified as a class clown," "comic talent," "disruptive rule-breaker," and "subversive joker." Analysis of the general factor showed that class clowns were primarily male, and tended to be seen as class clowns by the teacher. Analyses of the 24 character strengths of the VIA-Youth (Park and Peterson, 2006) showed that class clowns were high in humor and leadership, and low in strengths like prudence, self-regulation, modesty, honesty, fairness, perseverance, and love of learning. An inspection of signature strengths revealed that 75% of class clowns had humor as a signature strength. Furthermore, class clown behaviors were generally shown by students indulging in a life of pleasure, but low life of engagement. The four dimensions yielded different character strengths profiles. While all dimensions of class clowns behaviors were low in temperance strengths, the factors "identified as the class clown" and "comic talent" were correlated with leadership strengths and the two negative factors ("disruptive rule-breaker," "subversive joker") were low in other directed strengths. The disruptive rule breaking class clown was additionally low in intellectual strengths. While humor predicted life satisfaction, class clowning tended to go along with diminished satisfaction with life. It is concluded that different types of class clowns need to be kept apart and need different attention by teachers.

  13. The Strengths Assessment Inventory: Reliability of a New Measure of Psychosocial Strengths for Youth

    Brazeau, James N.; Teatero, Missy L.; Rawana, Edward P.; Brownlee, Keith; Blanchette, Loretta R.

    2012-01-01

    A new measure, the Strengths Assessment Inventory-Youth self-report (SAI-Y), was recently developed to assess the strengths of children and adolescents between the ages of 10 and 18 years. The SAI-Y differs from similar measures in that it provides a comprehensive assessment of strengths that are intrinsic to the individual as well as strengths…

  14. Is grip strength a predictor for total muscle strength in healthy children, adolescents, and young adults?

    Wind, Anne E.; Takken, Tim; Helders, Paul J. M.; Engelbert, Raoul H. H.

    2010-01-01

    The primary purpose of this study was to examine whether grip strength is related to total muscle strength in children, adolescents, and young adults. The second purpose was to provide reference charts for grip strength, which could be used in the clinical and research setting. This cross-sectional

  15. Spatial distribution

    Borregaard, Michael Krabbe; Hendrichsen, Ditte Katrine; Nachman, Gøsta Støger

    2008-01-01

    , depending on the nature of intraspecific interactions between them: while the individuals of some species repel each other and partition the available area, others form groups of varying size, determined by the fitness of each group member. The spatial distribution pattern of individuals again strongly......Living organisms are distributed over the entire surface of the planet. The distribution of the individuals of each species is not random; on the contrary, they are strongly dependent on the biology and ecology of the species, and vary over different spatial scale. The structure of whole...... populations reflects the location and fragmentation pattern of the habitat types preferred by the species, and the complex dynamics of migration, colonization, and population growth taking place over the landscape. Within these, individuals are distributed among each other in regular or clumped patterns...

  16. Distribution automation

    Gruenemeyer, D.

    1991-01-01

    This paper reports on a Distribution Automation (DA) System enhances the efficiency and productivity of a utility. It also provides intangible benefits such as improved public image and market advantages. A utility should evaluate the benefits and costs of such a system before committing funds. The expenditure for distribution automation is economical when justified by the deferral of a capacity increase, a decrease in peak power demand, or a reduction in O and M requirements

  17. Geometry and gravity influences on strength capability

    Poliner, Jeffrey; Wilmington, Robert P.; Klute, Glenn K.

    1994-01-01

    Strength, defined as the capability of an individual to produce an external force, is one of the most important determining characteristics of human performance. Knowledge of strength capabilities of a group of individuals can be applied to designing equipment and workplaces, planning procedures and tasks, and training individuals. In the manned space program, with the high risk and cost associated with spaceflight, information pertaining to human performance is important to ensuring mission success and safety. Knowledge of individual's strength capabilities in weightlessness is of interest within many areas of NASA, including workplace design, tool development, and mission planning. The weightless environment of space places the human body in a completely different context. Astronauts perform a variety of manual tasks while in orbit. Their ability to perform these tasks is partly determined by their strength capability as demanded by that particular task. Thus, an important step in task planning, development, and evaluation is to determine the ability of the humans performing it. This can be accomplished by utilizing quantitative techniques to develop a database of human strength capabilities in weightlessness. Furthermore, if strength characteristics are known, equipment and tools can be built to optimize the operators' performance. This study examined strength in performing a simple task, specifically, using a tool to apply a torque to a fixture.

  18. Strength training for children and adolescents.

    Faigenbaum, A D

    2000-10-01

    The potential benefits of youth strength training extend beyond an increase in muscular strength and may include favorable changes in selected health- and fitness-related measures. If appropriate training guidelines are followed, regular participation in a youth strength-training program has the potential to increase bone mineral density, improve motor performance skills, enhance sports performance, and better prepare our young athletes for the demands of practice and competition. Despite earlier concerns regarding the safety and efficacy of youth strength training, current public health objectives now aim to increase the number of boys and girls age 6 and older who regularly participate in physical activities that enhance and maintain muscular fitness. Parents, teachers, coaches, and healthcare providers should realize that youth strength training is a specialized method of conditioning that can offer enormous benefit but at the same time can result in serious injury if established guidelines are not followed. With qualified instruction, competent supervision, and an appropriate progression of the volume and intensity of training, children and adolescents cannot only learn advanced strength training exercises but can feel good about their performances, and have fun. Additional clinical trails involving children and adolescents are needed to further explore the acute and chronic effects of strength training on a variety of anatomical, physiological, and psychological parameters.

  19. Some conclusions about the concrete strength of the bored piles of Angra 2 nuclear power plant

    Thomaz, E.C.S.; Joia, L.A.

    1984-01-01

    The concrete of the bored piles of Angra 2 was submitted to a deep control, so more than five thousand core samples were analyzed to verify the quality of the concrete. Based on these samples and using statistics regression theory some conclusions could be done. It was analyzed the dependence of the concrete strength upon the depth of the pile. Also based on these samples some probability distribution functions that could simulate the concrete strength were studied applying the Kolmogorov - Smirnov fitness test. Finally, a method for evaluating a confidence interval of one of the probability function (Weibull distribution) was developed adopting the Monte Carlo simulation technique. (Author) [pt

  20. Behaviour and strength assessment of masonry prisms

    Nassif Nazeer Thaickavil

    2018-06-01

    Full Text Available This is a case study presenting the cracking behavior and assessment of the compressive strength of masonry prisms. The compressive strength of masonry was determined by performing laboratory tests on 192 masonry prism specimens corresponding to 3 specimens each in 64 groups. The variables considered in the experimental program are type of brick, strength of masonry and height-to-thickness (h/t ratio of the prism specimen. Pressed earth bricks and burnt clay bricks were used for the preparation of masonry prisms. A mathematical model is also proposed for the estimation of compressive strength of masonry prisms by performing a statistical multiple regression analysis on 232 data sets, which includes 64 test data from the present study and 168 test data published in the literature. The model was developed based on the regression analysis of test data of prisms made of a variety of masonry units namely clay bricks, pressed earth bricks, concrete blocks, calcium silicate bricks, stone blocks, perforated bricks and soft mud bricks. The proposed model not only accounts for the wide ranges of compressive strengths of masonry unit and mortar, but also accounts for the influence of volume fractions of masonry unit and mortar in addition to the height-to-thickness ratio. The predicted compressive strength of prisms using the proposed model is compared with 14 models available in published literature. The predicted strength was found to be in good agreement with the corresponding experimental data. Keywords: Prism strength, Stack bonded masonry, Running bonded masonry, Masonry unit strength, Cracking

  1. Predicting hand function in older adults: evaluations of grip strength, arm curl strength, and manual dexterity.

    Liu, Chiung-Ju; Marie, Deana; Fredrick, Aaron; Bertram, Jessica; Utley, Kristen; Fess, Elaine Ewing

    2017-08-01

    Hand function is critical for independence in activities of daily living for older adults. The purpose of this study was to examine how grip strength, arm curl strength, and manual dexterous coordination contributed to time-based versus self-report assessment of hand function in community-dwelling older adults. Adults aged ≥60 years without low vision or neurological disorders were recruited. Purdue Pegboard Test, Jamar hand dynamometer, 30-second arm curl test, Jebsen-Taylor Hand Function Test, and the Late-Life Function and Disability Instrument were administered to assess manual dexterous coordination, grip strength, arm curl strength, time-based hand function, and self-report of hand function, respectively. Eighty-four adults (mean age = 72 years) completed the study. Hierarchical multiple regressions show that older adults with better arm curl strength (β = -.25, p function test. In comparison, older adults with better grip strength (β = .40, p function. The relationship between grip strength and hand function may be test-specific. Grip strength becomes a significant factor when the test requires grip strength to successfully complete the test tasks. Arm curl strength independently contributed to hand function in both time-based and self-report assessments, indicating that strength of extrinsic muscles of the hand are essential for hand function.

  2. Are only Emotional Strengths Emotional? Character Strengths and Disposition to Positive Emotions.

    Güsewell, Angelika; Ruch, Willibald

    2012-07-01

    This study aimed to examine the relations between character strengths and dispositional positive emotions (i.e. joy, contentment, pride, love, compassion, amusement, and awe). A sample of 574 German-speaking adults filled in the Dispositional Positive Emotion Scales (DPES; Shiota, Keltner, & John, 2006), and the Values in Action Inventory of Strengths (VIA-IS; Peterson, Park, & Seligman, 2005). The factorial structure of the DPES was examined on item level. Joy and contentment could not be clearly separated; the items of the other five emotions loaded on separate factors. A confirmatory factor analysis assuming two latent factors (self-oriented and object/situation specific) was computed on scale level. Results confirmed the existence of these factors, but also indicated that the seven emotions did not split up into two clearly separable families. Correlations between dispositional positive emotions and character strengths were positive and generally low to moderate; a few theoretically meaningful strengths-emotions pairs yielded coefficients>.40. Finally, the link between five character strengths factors (i.e. emotional strengths, interpersonal strengths, strengths of restraint, intellectual strengths, and theological strengths) and the emotional dispositions was examined. Each of the factors displayed a distinctive "emotional pattern"; emotional strengths evidenced the most numerous and strongest links to emotional dispositions. © 2012 The Authors. Applied Psychology: Health and Well-Being © 2012 The International Association of Applied Psychology.

  3. Strength properties of concrete at elevated temperatures

    Freskakis, G.N.; Burrow, R.C.; Debbas, E.B.

    1979-01-01

    A study is presented concerning the compressive strength, modulus of elasticity, and stress-strain relationships of concrete at elevated temperatures. A review of published results provides information for the development of upper and lower bound relationships for compressive strength and the modulus of elasticity and establishes exposure conditions for a lower bound thermal response. The relationships developed from the literature review are confirmed by the results of a verification test program. The strength and elasticity relationships provide a basis for the development of design stress-strain curves for concrete exposed to elevated temperatures

  4. Neutron source strength associated with FTR fuel

    Boroughs, G.L.; Bunch, W.L.; Johnson, D.L.

    1975-01-01

    The study presented shows the important effect of shelf life on the neutron source strength anticipated from fuel irradiated in the FTR. The neutron source strength will be enhanced appreciably by extended shelf lives. High neutron source strengths will also be associated with reprocessed LWR plutonium, which is expected to contain a greater abundance of the higher isotopes. The branching ratio and cross section of 241 Am is an important parameter that needs to be defined more precisely to establish calculated values with greater precision

  5. Strength of low-carbon rotor steel

    Voropaev, V.I.; Filimonov, O.V.; Borisov, I.A.

    1988-01-01

    The results of studying the effect of chemical composition and thermal treatment regimes on the structural strength of steels of the 25KhN3MFA type are presented. It is shown that alloying with niobium from 0.01 to 0.08% steels with the increased nickel content (4.2-4.5%) contributes to the increase of structural strength and reduction of semibrittleness temperature. To obtain high values of strength and plastic properties cooling with the rate of 10 3 -10 5 K/hr is recommended

  6. Adhesion Strength of Biomass Ash Deposits

    Laxminarayan, Yashasvi; Jensen, Peter Arendt; Wu, Hao

    2016-01-01

    . Therefore, timely removal of ash deposits is essential for optimal boiler operation. In order to improve the qualitative and quantitative understanding of deposit shedding in boilers, this study investigates the shear adhesion strength of biomass ash deposits on superheater tubes. Artificial biomass ash...... deposits were prepared on superheater tubes and sintered in an oven at temperatures up to 1000 °C. Subsequently, the deposits were sheared off by an electrically controlled arm, and the corresponding adhesion strength was measured. The results reveal the effect of temperature, ash/deposit composition......, sintering duration, and steel type on the adhesion strength....

  7. Adhesion Strength of Biomass Ash Deposits

    Laxminarayan, Yashasvi; Jensen, Peter Arendt; Wu, Hao

    2015-01-01

    This study investigates the shear adhesion strength of biomass ash deposits on superheater tubes. Artificial biomass ash deposits were prepared on superheater tubes and sintered in an oven at temperatures up to 1000°C. Subsequently, the deposits were sheared off with the help of an electrically...... controlled arm. Higher sintering temperatures resulted in greater adhesion strengths, with a sharp increase observed near the melting point of the ash. Repetition of experiments with fixed operation conditions revealed considerable variation in the obtained adhesion strengths, portraying the stochastic...

  8. INFLUENCE OF STRENGTH TRAINING PROGRAM ON ISOMETRIC MUSCLE STRENGTH IN YOUNG ATHLETES

    Dragan Radovanovic

    2007-10-01

    Full Text Available Strength training, or resistance training, is a form of physical conditioning used to increase the ability to resist force. Since muscular strength is required for success in many sports, it is logical to assume that stronger and more powerful young athletes will achieve better results. The aim of the study was to examine the effects of strength training on young athletes. An eight-week strength training program for developing muscle strength was performed in this study. Training protocol was designed specifically for young adolescent’s athletes. The program consisted of exercises for lower and upper body, abdominal and lower back muscles. The programs did not involve the maximal (1-3 repetitions maximum and other very hard intensity exercises that may had negative effect on young athletes. The results showed that strength training program had positive effects on maximal isometric muscle force (Fmax and motor skill. The increase presents the combined influence of strength training and growth.

  9. Development and psychometric properties of the Inner Strength Scale.

    Lundman, Berit; Viglund, Kerstin; Aléx, Lena; Jonsén, Elisabeth; Norberg, Astrid; Fischer, Regina Santamäki; Strandberg, Gunilla; Nygren, Björn

    2011-10-01

    Four dimensions of inner strength were previously identified in a meta-theoretical analysis: firmness, creativity, connectedness, and flexibility. The aim of this study was to develop an Inner Strength Scale (ISS) based on those four dimensions and to evaluate its psychometric properties. An initial version of ISS was distributed for validation purpose with the Rosenberg Self-Esteem Scale, the resilience scale, and the sense of Coherence Scale. A convenience sample of 391 adults, aged 19-90 years participated. Principal component analysis (PCA) and confirmatory factor analysis (CFA) were used in the process of exploring, evaluating, and reducing the 63-item ISS to the 20-item ISS. Cronbach's alpha and test-retest were used to measure reliability. CFA showed satisfactory goodness-of-fit for the 20-item ISS. The analysis supported a fourfactor solution explaining 51% of the variance. Cronbach's alpha on the 20-item ISS was 0.86, and the test-retest showed stability over time (r=0.79). The ISS was found to be a valid and reliable instrument for capturing a multifaceted understanding of inner strength. Further tests of psychometric properties of the ISS will be performed in forthcoming studies. Copyright © 2011 Elsevier Ltd. All rights reserved.

  10. Bond strength with various etching times on young permanent teeth

    Wang, W.N.; Lu, T.C. (School of Dentistry, National Defense Medical Center, Taipei, Taiwan (China))

    1991-07-01

    Tensile bond strengths of an orthodontic resin cement were compared for 15-, 30-, 60-, 90-, or 120-second etching times, with a 37% phosphoric acid solution on the enamel surfaces of young permanent teeth. Fifty extracted premolars from 9- to 16-year-old children were used for testing. An orthodontic composite resin was used to bond the bracket directly onto the buccal surface of the enamel. The tensile bond strengths were tested with an Instron machine. Bond failure interfaces between bracket bases and teeth surfaces were examined with a scanning electron microscope and calculated with mapping of energy-dispersive x-ray spectrometry. The results of tensile bond strength for 15-, 30-, 60-, or 90-second etching times were not statistically different. For the 120-second etching time, the decrease was significant. Of the bond failures, 43%-49% occurred between bracket and resin interface, 12% to 24% within the resin itself, 32%-40% between resin and tooth interface, and 0% to 4% contained enamel fragments. There was no statistical difference in percentage of bond failure interface distribution between bracket base and resin, resin and enamel, or the enamel detachment. Cohesive failure within the resin itself at the 120-second etching time was less than at other etching times, with a statistical significance. To achieve good retention, to decrease enamel loss, and to reduce moisture contamination in the clinic, as well as to save chairside time, a 15-second etching time is suggested for teenage orthodontic patients.

  11. Beta-decay rate and beta-delayed neutron emission probability of improved gross theory

    Koura, Hiroyuki

    2014-09-01

    A theoretical study has been carried out on beta-decay rate and beta-delayed neutron emission probability. The gross theory of the beta decay is based on an idea of the sum rule of the beta-decay strength function, and has succeeded in describing beta-decay half-lives of nuclei overall nuclear mass region. The gross theory includes not only the allowed transition as the Fermi and the Gamow-Teller, but also the first-forbidden transition. In this work, some improvements are introduced as the nuclear shell correction on nuclear level densities and the nuclear deformation for nuclear strength functions, those effects were not included in the original gross theory. The shell energy and the nuclear deformation for unmeasured nuclei are adopted from the KTUY nuclear mass formula, which is based on the spherical-basis method. Considering the properties of the integrated Fermi function, we can roughly categorized energy region of excited-state of a daughter nucleus into three regions: a highly-excited energy region, which fully affect a delayed neutron probability, a middle energy region, which is estimated to contribute the decay heat, and a region neighboring the ground-state, which determines the beta-decay rate. Some results will be given in the presentation. A theoretical study has been carried out on beta-decay rate and beta-delayed neutron emission probability. The gross theory of the beta decay is based on an idea of the sum rule of the beta-decay strength function, and has succeeded in describing beta-decay half-lives of nuclei overall nuclear mass region. The gross theory includes not only the allowed transition as the Fermi and the Gamow-Teller, but also the first-forbidden transition. In this work, some improvements are introduced as the nuclear shell correction on nuclear level densities and the nuclear deformation for nuclear strength functions, those effects were not included in the original gross theory. The shell energy and the nuclear deformation for

  12. Splitting of ISGMR strength in the light-mass nucleus 24Mg due to ground-state deformation

    Y.K. Gupta

    2015-09-01

    Full Text Available The isoscalar giant monopole resonance (ISGMR strength distribution in 24Mg has been determined from background-free inelastic scattering of 386-MeV α particles at extreme forward angles, including 0∘. The ISGMR strength distribution has been observed for the first time to have a two-peak structure in a light-mass nucleus. This splitting of ISGMR strength is explained well by microscopic theory in terms of the prolate deformation of the ground state of 24Mg.

  13. Predicting the tensile strength of A UD basalt/ epoxy composite used for the confinement of concrete structures

    Ciniņa, I.; Zīle, O.; Andersons, J.

    2013-01-01

    The principal aim of the present research was to predict the strength of UD basalt fiber/epoxy matrix composites in tension along the reinforcement direction. Tension tests on single basalt fibers were performed to determine the functional form of their strength distribution and to evaluate the parameters of the distribution. Also, microbond tests were carried out to assess the interfacial shear strength of the fibers and polymer matrix. UD composite specimens were produced and tested for the longitudinal tensile strength. The predicted strength of the composite was found to exceed the experimental values by ca. 20%, which can be explained by imperfections in the fiber alignment, impregnation, and adhesion in the composite specimens.

  14. Strength Tests on Hulls and Floats

    Matthaes, K

    1942-01-01

    The present report deals with strength tests on hulls and floats intended in part for the collection of construction data for the design of these components and in part for the stress analysis of the finished hulls and floats.

  15. Magnetic Field Strength Evaluation Yu. S. Yefimov

    physical task is to evaluate the strength and topology of magnetic field in blazars and related ... polarization, spectral index of radiation, ratio of apparent velocity of the motion of matter along .... A detailed analysis of the evaluation of physical.

  16. Shear strength of clay and silt embankments.

    2009-09-01

    Highway embankment is one of the most common large-scale geotechnical facilities constructed in Ohio. In the past, the design of these embankments was largely based on soil shear strength properties that had been estimated from previously published e...

  17. Pilates: Build Strength in Your Core Muscles

    Healthy Lifestyle Fitness Pilates may sound intimidating, but it's an accessible way to build strength in your core muscles for better posture, balance and flexibility. By Mayo Clinic Staff Pilates isn't just for fitness fanatics. It's actually ...

  18. Personality Typology in Relation to Muscle Strength

    Terracciano, Antonio; Milaneschi, Yuri; Metter, E. Jeffrey; Ferrucci, Luigi

    2011-01-01

    Background Physical inactivity plays a central role in the age-related decline in muscle strength, an important component in the process leading to disability. Personality, a significant determinant of health behaviors including physical activity, could therefore impact muscle strength throughout adulthood and affect the rate of muscle strength decline with aging. Personality typologies combining “high neuroticism” (N≥55), “low extraversion” (Epersonality types. Facet analyses suggest an important role for the N components of depression and hostility. Physical activity level appears to partly explain some of these associations. Conclusion Findings provide support for the notion that the typological approach to personality may be useful in identifying specific personality types at risk of low muscle strength and offer the possibility for more targeted prevention and intervention programs. PMID:21614452

  19. Neural adaptations to electrical stimulation strength training

    Hortobagyi, Tibor; Maffiuletti, Nicola A.

    2011-01-01

    This review provides evidence for the hypothesis that electrostimulation strength training (EST) increases the force of a maximal voluntary contraction (MVC) through neural adaptations in healthy skeletal muscle. Although electrical stimulation and voluntary effort activate muscle differently, there

  20. Collision strengths for transitions in Ni XIX

    4l configurations of Ni XIX, for which flexible atomic code. (FAC) has been ... atomic data (namely energy levels, radiative rates, collision strengths, excitation rates, etc.) ... Zhang and Sampson, who adopted the Coulomb–Born-exchange.

  1. Influence of processing factors over concrete strength.

    Kara, K. A.; Dolzhenko, A. V.; Zharikov, I. S.

    2018-03-01

    Construction of facilities of cast in-situ reinforced concrete poses additional requirements to quality of material, peculiarities of the construction process may sometimes lead to appearance of lamination planes and inhomogeneity of concrete, which reduce strength of the material and structure as a whole. Technology compliance while working with cast in-situ concrete has a significant impact onto the concrete strength. Such process factors as concrete curing, vibration and compaction of the concrete mixture, temperature treatment, etc., when they are countered or inadequately followed lead to a significant reduction in concrete strength. Here, the authors experimentally quantitatively determine the loss of strength in in-situ cast concrete structures due to inadequate following of process requirements, in comparison with full compliance.

  2. Nutritional Supplements for Strength Power Athletes

    Wilborn, Colin

    Over the last decade research involving nutritional supplementation and sport performance has increased substantially. Strength and power athletes have specific needs to optimize their performance. Nutritional supplementation cannot be viewed as a replacement for a balanced diet but as an important addition to it. However, diet and supplementation are not mutually exclusive, nor does one depend on the other. Strength and power athletes have four general areas of supplementation needs. First, strength athletes need supplements that have a direct effect on performance. The second group of supplements includes those that promote recovery. The third group comprises the supplements that enhance immune function. The last group of supplements includes those that provide energy or have a direct effect on the workout. This chapter reviews the key supplements needed to optimize the performance and training of the strength athlete.

  3. Distributed Merge Trees

    Morozov, Dmitriy; Weber, Gunther

    2013-01-08

    Improved simulations and sensors are producing datasets whose increasing complexity exhausts our ability to visualize and comprehend them directly. To cope with this problem, we can detect and extract significant features in the data and use them as the basis for subsequent analysis. Topological methods are valuable in this context because they provide robust and general feature definitions. As the growth of serial computational power has stalled, data analysis is becoming increasingly dependent on massively parallel machines. To satisfy the computational demand created by complex datasets, algorithms need to effectively utilize these computer architectures. The main strength of topological methods, their emphasis on global information, turns into an obstacle during parallelization. We present two approaches to alleviate this problem. We develop a distributed representation of the merge tree that avoids computing the global tree on a single processor and lets us parallelize subsequent queries. To account for the increasing number of cores per processor, we develop a new data structure that lets us take advantage of multiple shared-memory cores to parallelize the work on a single node. Finally, we present experiments that illustrate the strengths of our approach as well as help identify future challenges.

  4. Strength and power of knee extensor muscles

    Knežević Olivera

    2011-01-01

    Full Text Available In the studies of human neuromuscular function, the function of leg muscles has been most often measured, particularly the function of the knee extensors. Therefore, this review will be focused on knee extensors, methods for assessment of its function, the interdependence of strength and power, relations that describe these two abilities and the influence of various factors on their production (resistance training, stretching, movement tasks, age, etc.. Given that it consists of four separate muscles, the variability of their anatomical characteristics affects their participation in strength and power production, depending on the type of movement and motion that is performed. Since KE is active in a variety of activities it must be able to generate great strength in a large and diverse range of muscle lengths and high shortening velocities, in respect to different patterns of strength production, and thus different generation capacities within the muscle (Blazevich et al., 2006. It has been speculated that KE exerts its Pmax at workloads close to subject's own body weight or lower (Rahmani et al., 2001, which is very close to the maximum dynamic output hypothesis (MDI of Jaric and Markovic (2009. Changes under the influence of resistance training or biological age are variously manifested in muscle's morphological, physiological and neural characteristics, and thus in strength and power. Understanding the issues related to strength and power as abilities of great importance for daily activities, is also important for sports and rehabilitation. Performances improvement in sports in which leg muscles strength and power are crucial, as well as recovery after the injuries, are largely dependent on the research results regarding KE function. Also, the appropriate strength balance between knee flexors and extensors is important for the knee joint stability, so that the presence of imbalance between these two muscle groups might be a risk factor for

  5. Strength and structure of nanocrystalline titanium

    Noskova, N.I.; Pereturina, I.A.; Elkina, O.A.; Stolyarov, V.V.

    2004-01-01

    Investigation results on strength and plasticity of nanocrystalline titanium VT-1 are presented. Specific features of plastic deformation on tension of this material specimens in an electron microscope column are studied in situ. It is shown that nanocrystalline titanium strength and plasticity at room temperature are dependent on the structure and nanograin size. It is revealed that deformation processes in nanocrystalline titanium are characterized by activation of deformation rotational modes and microtwinning [ru

  6. Probabilistic concept to describe the influence of rate of loading on strength of concrete

    Mihashi, H.; Wittmann, F.H.

    1981-01-01

    Any reliability assessment of concrete structures is dependent on realistic assumptions on strength distribution. By means of experimental test series the most appropriate distribution function cannot be determined. In this contribution a theoretical concept to describe variability of strength of concrete will be presented. This approach is based on the characteristic composite structure. The structure of concrete is composed of aggregates and a binding agent i.e. porous hardened cement paste. Under formal conditions there are already big pores and cracks in the matrix as well as in the interface before a specimen is loaded. All structural defects can be assumed to be statistically distributed all over the specimen. If a load is applied cracks start to grow form the most critical structural defects. For a realistic estimation of the reliability of a secondary containment under impact loading conditions the influence of rate of loading on mean value and variability of strength is of major interest. The presented theory predicts that the mean strength increases with a power law as the rate of loading increases, while the coefficient of variation remains constant. A number of test series have been carried out to verify the theoretical concept. Different types of mortar (model concrete) and concrete have been included in the test program. Within the range of accuracy experimental results agree well with theoretical predictions. It can be concluded that the variability of macroscopic properties of concrete can be linked with the distribution of structural defects. Strength of concrete is best represented by a Weibull-type distribution function. The influence of rate of loading on strength can be experessed by means of a general rate process. (orig.)

  7. Compressive and tensile strength for concrete containing coal bottom ash

    Maliki, A. I. F. Ahmad; Shahidan, S.; Ali, N.; Ramzi Hannan, N. I. R.; Zuki, S. S. Mohd; Ibrahim, M. H. W.; Azmi, M. A. Mohammad; Rahim, M. Abdul

    2017-11-01

    The increasing demand in the construction industry will lead to the depletion of materials used in construction sites such as sand. Due to this situation, coal bottom ash (CBA) was selected as a replacement for sand. CBA is a by-product of coal combustion from power plants. CBA has particles which are angular, irregular and porous with a rough surface texture. CBA also has the appearance and particle size distribution similar to river sand. Therefore, these properties of CBA make it attractive to be used as fine aggregate replacement in concrete. The objectives of this study were to determine the properties of CBA concrete and to evaluate the optimum percentage of CBA to be used in concrete as fine aggregate replacement. The CBA was collected at Tanjung Bin power plant. The mechanical experiment (compressive and tensile strength test) was conducted on CBA concrete. Before starting the mechanical experiment, cubic and cylindrical specimens with dimensions measuring 100 × 100 × 100 mm and 150 × 300 mm were produced based on the percentage of coal bottom ash in this study which is 0% as the control specimen. Meanwhile 10%, 20%, 30%, 40%, 50%, 60%, 70%, 80%, 90% and 100% of CBA were used to replace the fine aggregates. The CBA concrete samples were cured for 7 days and 28 days respectively to maintain the rate of hydration and moisture. After the experimental work was done, it can be concluded that the optimum percentage of CBA as fine aggregate is 60% for a curing period of both 7 days and 28 days with the total compressive strength of 36.4 Mpa and 46.2 Mpa respectively. However, the optimum percentage for tensile strength is at 70% CBA for a curing period of both 7 days and 28 days with a tensile strength of 3.03 MPa and 3.63 MPa respectively.

  8. Distributed creativity

    Glaveanu, Vlad Petre

    This book challenges the standard view that creativity comes only from within an individual by arguing that creativity also exists ‘outside’ of the mind or more precisely, that the human mind extends through the means of action into the world. The notion of ‘distributed creativity’ is not commonly...... used within the literature and yet it has the potential to revolutionise the way we think about creativity, from how we define and measure it to what we can practically do to foster and develop creativity. Drawing on cultural psychology, ecological psychology and advances in cognitive science......, this book offers a basic framework for the study of distributed creativity that considers three main dimensions of creative work: sociality, materiality and temporality. Starting from the premise that creativity is distributed between people, between people and objects and across time, the book reviews...

  9. Percentage Level of Tannin fur Rabbit for Leather Concerning Stitch Tearing Strength, Tearing Strength and Flexibility

    Mustakim Mustakim

    2012-02-01

    Full Text Available The purpose of this study was to find out the appropriate of tannin level for rabbit fur leather concerning stitch tearing strength, tearing strength, and flexibility. The result were expected to contribute good information for the society, leather craftsman, and further researchers about fur leather tanning especially rabbit fur leather with tannin concerning stitch tearing strength, tearing strength and flexibility. The material that used were 12 pieces of four months of rabbit skin. The research method was Completely Randomized Design, consist of three treatments of tannin, they were: M1 (mimosa 15%, M2 (mimosa 20%, and M3 (mimosa 25%. Each of treatment hold on four repetition, the variables which measured were stitch tearing strength, tearing strength, and flexibility of fur leather. Data were  analysed by analysis variance followed by Duncan’s Multiple Range Test. The result of this research indicate that the use level of tannin give significant influence (P<0.05 among stitch tearing strength, tearing strength. It gave a very significant influence (P<0.01 for flexibility of rabbit fur leather. Based on the result, can be concluded that 25 % of tannin (mimosa, produce the best  result on stitch tearing strength and tearing strength. The increase of tannin offer will decrease the flexibility of fur leather but the lowest tannin produced the best flexibility of fur leather (15 percent. The best quality of rabbit fur leather produced by 25 % of tannin.   Keywords : leather, tannin, quality

  10. Upper extremity injuries associated with strength training.

    Haupt, H A

    2001-07-01

    Most injuries sustained during strength training are mild strains that resolve with appropriate rest. More severe injuries include traumatic shoulder dislocations, tendon ruptures of the pectoralis major, biceps, and triceps; stress fractures of the distal clavicle, humerus, radius, and ulna; traumatic fractures of the distal radius and ulna in adolescent weightlifters; and compressive and stretch neuropathies. These more severe injuries are usually the result of improperly performing a strength training exercise. Educating athletes regarding proper strength-training techniques serves to reverse established injury patterns and to prevent these injuries in the first place. Recognizing the association of anabolic steroid use to several of the injury patterns further reinforces the need for medical specialists to counsel athletes against their use. With the increasing use of supplements such as creatine, the incidence and nature of strength-training injuries may change further. Greater emphasis on the competitive performance of younger athletes undoubtedly will generate enthusiasm for strength training at earlier ages in both sexes. The importance of proper supervision of these young athletes by knowledgeable persons will increase. As the popularity of strength training grows, there will be ample opportunity to continue to catalog the injury patterns associated with this activity.

  11. Strength Testing in Motor Neuron Diseases.

    Shefner, Jeremy M

    2017-01-01

    Loss of muscle strength is a cardinal feature of all motor neuron diseases. Functional loss over time, including respiratory dysfunction, inability to ambulate, loss of ability to perform activities of daily living, and others are due, in large part, to decline in strength. Thus, the accurate measurement of limb muscle strength is essential in therapeutic trials to best understand the impact of therapy on vital function. While qualitative strength measurements show declines over time, the lack of reproducibility and linearity of measurement make qualitative techniques inadequate. A variety of quantitative measures have been developed; all have both positive attributes and limitations. However, with careful training and reliability testing, quantitative measures have proven to be reliable and sensitive indicators of both disease progression and the impact of experimental therapy. Quantitative strength measurements have demonstrated potentially important therapeutic effects in both amyotrophic lateral sclerosis and spinobulbar muscular atrophy, and have been shown feasible in children with spinal muscular atrophy. The spectrum of both qualitative and quantitative strength measurements are reviewed and their utility examined in this review.

  12. Strength gradient enhances fatigue resistance of steels

    Ma, Zhiwei; Liu, Jiabin; Wang, Gang; Wang, Hongtao; Wei, Yujie; Gao, Huajian

    2016-02-01

    Steels are heavily used in infrastructure and the transportation industry, and enhancing their fatigue resistance is a major challenge in materials engineering. In this study, by introducing a gradient microstructure into 304 austenitic steel, which is one of the most widely used types of stainless steel, we show that a strength gradient substantially enhances the fatigue life of the material. Pre-notched samples with negative strength gradients in front of the notch’s tip endure many more fatigue cycles than do samples with positive strength gradients during the crack initiation stage, and samples with either type of gradient perform better than do gradient-free samples with the same average yield strength. However, as a crack grows, samples with positive strength gradients exhibit better resistance to fatigue crack propagation than do samples with negative gradients or no gradient. This study demonstrates a simple and promising strategy for using gradient structures to enhance the fatigue resistance of materials and complements related studies of strength and ductility.

  13. On high temperature strength of carbon steels

    Ichinose, Hiroyuki; Tamura, Manabu; Kanero, Takahiro; Ihara, Yoshihito

    1977-01-01

    In the steels for high temperature use, the oxidation resistance is regarded as important, but carbon steels show enough oxidation resistance to be used continuously at the temperature up to 500 deg. C if the strength is left out of consideration, and up to 450 deg. C even when the strength is taken into account. Moreover, the production is easy, the workability and weldability are good, and the price is cheap in carbon steels as compared with alloy steels. In the boilers for large thermal power stations, 0.15-0.30% C steels are used for reheater tubes, main feed water tubes, steam headers, wall water tubes, economizer tubes, bypass pipings and others, and they account for 70% of all steel materials used for the boilers of 350 MW class and 30% in 1000 MW class. The JIS standard for the carbon steels for high temperature use and the related standards in foreign countries are shown. The high temperature strength of carbon steels changes according to the trace elements, melting and heat treatment as well as the main compositions of C, Si and Mn. Al and N affect the high temperature strength largely. The characteristics of carbon steels after the heating for hours, the factors controlling the microstructure and high temperature strength, and the measures to improve the high temperature strength of carbon steels are explained. (Kako, I.)

  14. Mapping strengths into virtues: The relation of the 24 VIA-strengths to six ubiquitous virtues

    Willibald eRuch

    2015-04-01

    Full Text Available The Values-in-Action (VIA-classification distinguishes six core virtues and 24 strengths. As the assignment of the strengths to the virtues was done on theoretical grounds it still needs empirical verification. As an alternative to factor analytic investigations the present study utilizes expert judgments. In a pilot study the conceptual overlap among five sources of knowledge (strength’s name including synonyms, short definitions, brief descriptions, longer theoretical elaborations, and item content about a particular strength was examined. The results show that the five sources converged quite well, with the short definitions and the items being slightly different from the other. All strengths exceeded a cut-off value but the convergence was much better for some strengths (e.g., zest than for others (e.g., perspective. In the main study 70 experts (from psychology, philosophy, theology, etc. and 41 laypersons rated how prototypical the strengths are for each of the six virtues. The results showed that 10 were very good markers for their virtues, 9 were good markers, four were acceptable markers, and only one strength failed to reach the cut-off score for its assigned virtue. However, strengths were often markers for two or even three virtues, and occasionally they marked the other virtue more strongly than the one they were assigned to. The virtue prototypicality ratings were slightly positively correlated with higher coefficients being found for justice and humanity. A factor analysis of the 24 strengths across the ratings yielded the six factors with an only slightly different composition of strengths and double loadings. It is proposed to adjust either the classification (by reassigning strengths and by allowing strengths to be subsumed under more than one virtue or to change the definition of certain strengths so that they only exemplify one virtue. The results are discussed in the context of factor analytic attempts to verify the

  15. Increasing Lean Mass and Strength: A Comparison of High Frequency Strength Training to Lower Frequency Strength Training.

    Thomas, Michael H; Burns, Steve P

    The purpose of this study was to determine the effect strength training frequency has on improvements in lean mass and strength. Participants were 7 women and 12 men, age ( χ̄ = 34.64 years ± 6.91 years), with strength training experience, training age ( χ̄ = 51.16 months ± 39.02 months). Participants were assigned to one of two groups to equal baseline group demographics. High frequency training group (HFT) trained each muscle group as the agonist, 3 times per week, exercising with 3 sets per muscle group per session (3 total body workouts). Low frequency training group (LFT) trained each muscle group as the agonist one time per week, completing all 9 sets during that one workout. LFT consisted of a routine split over three days: 1) pectoralis, deltoids, and triceps; 2) upper back and biceps; 3) quadriceps, hamstrings, calves, and abdominals. Following eight weeks of training, HFT increased lean mass by 1.06 kg ± 1.78 kg, (1.9%), and LFT increased lean mass by .99 kg ± 1.31 kg, (2.0%). HFT strength improvements on the chest press was 9.07 kg ± 6.33 kg, (11%), and hack squat 20.16 kg ± 11.59 kg, (21%). LFT strength improvements on chest press was 5.80kg ± 4.26 kg, (7.0%), and hack squat 21.83 kg ± 11.17 kg, (24 %). No mean differences between groups were significant. These results suggest that HFT and LFT of equal set totals result in similar improvements in lean mass and strength, following 8 weeks of strength training.

  16. Distributed systems

    Van Steen, Maarten

    2017-01-01

    For this third edition of "Distributed Systems," the material has been thoroughly revised and extended, integrating principles and paradigms into nine chapters: 1. Introduction 2. Architectures 3. Processes 4. Communication 5. Naming 6. Coordination 7. Replication 8. Fault tolerance 9. Security A separation has been made between basic material and more specific subjects. The latter have been organized into boxed sections, which may be skipped on first reading. To assist in understanding the more algorithmic parts, example programs in Python have been included. The examples in the book leave out many details for readability, but the complete code is available through the book's Website, hosted at www.distributed-systems.net.

  17. Flexural strength of proof-tested and neutron-irradiated silicon carbide

    Price, R. J.; Hopkins, G. R.

    1982-08-01

    Proof testing before service is a valuable method for ensuring the reliability of ceramic structures. Silicon carbide has been proposed as a very low activation first-wall and blanket structural material for fusion devices, where it would experience a high flux of fast neutrons. Strips of three types of silicon carbide were loaded in four-point bending to a stress sufficient to break about a third of the specimens. Groups of 16 survivors were irradiated to 2 × 10 26n/ m2 ( E>0.05 MeV) at 740°C and bend tested to failure. The strength distribution of chemically vapor-deposited silicon carbide (Texas Instruments) was virtually unchanged by irradiation. The mean strength of sintered silicon carbide (Carborundum Alpha) was reduced 34% by irradiation, while the Weibull modulus and the truncated strength distribution characteristic of proof-tested material were retained. Irradiation reduced the mean strength of reaction-bonded silicon carbide (Norton NC-430) by 58%, and the spread in strength values was increased. We conclude that for the chemically vapor-deposited and the sintered silicon carbide the benefits of proof testing to eliminate low strength material are retained after high neutron exposures.

  18. Push-off tests and strength evaluation of joints combining shrink fitting with bonding

    Yoneno, Masahiro; Sawa, Toshiyuki; Shimotakahara, Ken; Motegi, Yoichi

    1997-03-01

    Shrink fitted joints have been used in mechanical structures. Recently, joints combining shrink fitting with anaerobic adhesives bonded between the shrink fitted surfaces have been appeared in order to increase the joint strength. In this paper, push-off test was carried out on strength of joints combining shrink fitting with bonding by material testing machine. In addition, the push-off strength of shrink fitting joints without an anaerobic adhesive was also measured. In the experiments, the effects of the shrinking allowance and the outer diameter of the rings on the joint strength are examined. The interface stress distribution in bonded shrink fitted joints subjected to a push-off load is analyzed using axisymmetrical theory of elasticity as a four-body contact problem. Using the interface stress distribution, a method for estimating joint strength is proposed. The experimental results are in a fairly good agreement with the numerical results. It is found that the strength of combination joints is greater than that of shrink fitted joints.

  19. Modal characteristics and fatigue strength of compressor blades

    Kim, Kyung Kook; Lee, Young Shin

    2014-01-01

    High-cycle fatigue (HCF) has been identified as one of the primary causes of gas turbine engine failure. The modal characteristics and endurance strength of a 5 MW gas turbine engine blade developed by Doosan Heavy Industries and Construction Co., Ltd. in HCF fracture were verified through analysis and tests to determine the reliability of the compressor blade. A compressor blade design procedure that considers HCF life was performed in the following order: airfoil and blade profile design, modal analysis, stress distribution test, stress endurance limit test, and fatigue life verification. This study analyzed the Campbell diagram and estimated resonance risk on the basis of the natural frequency analysis and modal test of the compressor blade to guarantee safe and operational reliability. In addition, the maximum stress point of the compressor blade was determined through stress distribution analysis and test. The bonding point of the strain gage was determined by using fatigue test. Stress endurance limit test was performed based on the results of these tests. This research compared and verified the modal characteristics and endurance strengths of the compressor blades to prevent HCF fracture, which is among the major causes of gas turbine engine damage. A fatigue life design procedure of compressor blades was established. The 5 MW class gas turbine compressor blade is well designed in terms of resonance stability and fatigue endurance limit.

  20. Modal characteristics and fatigue strength of compressor blades

    Kim, Kyung Kook [Doosan Heavy Industries and Construction, Changwon (Korea, Republic of); Lee, Young Shin [Chungnam National University, Daejeon (Korea, Republic of)

    2014-04-15

    High-cycle fatigue (HCF) has been identified as one of the primary causes of gas turbine engine failure. The modal characteristics and endurance strength of a 5 MW gas turbine engine blade developed by Doosan Heavy Industries and Construction Co., Ltd. in HCF fracture were verified through analysis and tests to determine the reliability of the compressor blade. A compressor blade design procedure that considers HCF life was performed in the following order: airfoil and blade profile design, modal analysis, stress distribution test, stress endurance limit test, and fatigue life verification. This study analyzed the Campbell diagram and estimated resonance risk on the basis of the natural frequency analysis and modal test of the compressor blade to guarantee safe and operational reliability. In addition, the maximum stress point of the compressor blade was determined through stress distribution analysis and test. The bonding point of the strain gage was determined by using fatigue test. Stress endurance limit test was performed based on the results of these tests. This research compared and verified the modal characteristics and endurance strengths of the compressor blades to prevent HCF fracture, which is among the major causes of gas turbine engine damage. A fatigue life design procedure of compressor blades was established. The 5 MW class gas turbine compressor blade is well designed in terms of resonance stability and fatigue endurance limit.

  1. Hip adduction and abduction strength profiles in elite soccer players

    Thorborg, Kristian; Serner, Andreas; Petersen, Jesper

    2011-01-01

    An ipsilateral hip adduction/abduction strength ratio of more than 90%, and hip adduction strength equal to that of the contralateral side have been suggested to clinically represent adequate strength recovery of hip adduction strength in athletes after groin injury. However, to what extent side-......-to-side symmetry in isometric hip adduction and abduction strength can be assumed in soccer players remains uncertain.......An ipsilateral hip adduction/abduction strength ratio of more than 90%, and hip adduction strength equal to that of the contralateral side have been suggested to clinically represent adequate strength recovery of hip adduction strength in athletes after groin injury. However, to what extent side...

  2. The nuclear deformation versus the spin-flip like excitations and the suppression of the 2 νββ decay amplitude

    Raduta, A. A.; Delion, D. S.; Faessler, A.

    1998-01-01

    The suppression mechanism of the Gamow-Teller double beta decay amplitude M GT is studied using a many body Hamiltonian which describes a composite system of protons and neutrons moving in a projected spherical single particle basis. Alike nucleons interact through pairing, while protons and neutrons by a separable dipole-dipole force both in the particle-hole (ph) and particle-particle (pp) channels. The spin-flip and non-spin-flip components of the QRPA phonons have different contributions to the M GT value. The relative magnitudes and phases depend on both the strength of the particle-particle interaction (g pp ) and nuclear deformation. The deformation yields a fragmentation of the M GT value on one hand and washes out the separation of states of pure spin-flip and non spin-flip structures. Due to this effect, M GT has only one fragmented resonance structure in the low part of the spectrum. The mechanism of M GT suppression is different for spherical and deformed nuclei. While for spherical situation the resonances of pure spin-flip and non spin-flip character are separated in energy, for deformed case the two resonances coincide. In both cases, approaching the critical value of g pp , where the Random Phase Approximation (RPA) breaks down, a lot of strength is accumulated in the lowest RPA state. The difference is that, while in the spherical case this has a non spin-flip nature, in the deformed case the state is a mixture of both types of configurations. (authors)

  3. Refinement of the gross theory of nuclear {beta}-decay, and hindrance of the first-forbidden transition of rank 1

    Nakata, Hidehiko [Waseda Univ., Tokyo (Japan). Dept. of Physics; Tachibana, Takahiro; Yamada, Masami

    1997-03-01

    Recently the gross theory of nuclear {beta}-decay was refined for odd-odd nuclei. In this refinement, the effect of the selection rule of {beta}-transitions from the ground states of odd-odd nuclei to those of even-even nuclei was taken into account based on a statistical consideration. The transitions to the first 2{sup +} excited states in even-even nuclei were also taken into account according to the selection rule approximately. In that study, it was found that the transitions between 1{sup -} ground states of the odd-odd nuclei and 0{sup +} ground states of even-even nuclei, belonging to the first-forbidden transitions of rank 1, are strongly hindered. A reduction factor was introduced for the transitions to the ground states of even-even nuclei to take into account this hindrance. It was also found that the strength functions of the Gamow-Teller transitions obtained from the conventional gross theory are underestimated by a factor of about 3. In order to improve this underestimation, the Lorentz-type function was adopted for the one-particle strength function in the model instead of the hyperbolic-secant-type function. In the present study we have newly analyzed the experimental ft-values of odd-A nuclei, and found that the first-forbidden transitions of rank 1 are also considerably hindered between the ground states. Following the above refinement we have calculated the {beta}-ray spectra of some odd-odd short-lived fission products with the use of the refined gross theory. These results are compared not only with the experiments by Rudstam et al. but also with the conventional gross theory. (author)

  4. Evaluation of size dependent design shear strength of reinforced ...

    to the development of the size dependent models on the shear strength in ... predict the diagonal cracking strength and the ultimate shear strength of RC ... ing strength of normal beams was by Zsutty (1968) based on the data base available without .... The comparison of the calculated shear strength of the beams is shown.

  5. Muscle strength as a predictor of onset of ADL dependence in people aged 75 years

    Rantanen, Taina; Avlund, Kirsten; Suominen, Harri

    2002-01-01

    . For each muscle group tested, three equal groups were formed for men and women separately based on distributions of results. Those who reported being unable or needing help for eating, dressing, bathing, toileting, walking indoors or transferring from a bed or a chair were rated as ADL dependent....... Of the 227 initially ADL independent men, 21 (9.3%) became dependent in ADL. In women, the figures were 30 (8.8%) of 340. Multiple logistic regression models were used to predict the risk of ADL dependence in groups based on strength tertiles. After confirming that the association of muscle strength...... and incident ADL-dependence was similar in men and women, both genders were included in the same analyses adjusted for body weight and height, gender and research locality. Gender specific cut-offs were used for strength tertiles. All the strength tests predicted ADL dependence, with those being in the lowest...

  6. Shear bond strength of one-step self-etch adhesives: pH influence

    Poggio, Claudio; Beltrami, Riccardo; Scribante, Andrea; Colombo, Marco; Chiesa, Marco

    2015-01-01

    Background: The aim of this study was to compare the shear bond strength of four one-step self-etch adhesives with different pH values to enamel and dentin. Materials and Methods: In this in vitro study, 200 bovine permanent mandibular incisors were used. Four one-step self-etch adhesives with different pH values were tested both on enamel and on dentin: Adper™ Easy Bond Self-Etch Adhesive (pH = 0.8-1), Futurabond NR (pH=2), G-aenial Bond (pH = 1.5), Clearfil S3 Bond (pH = 2.7). After adhesive systems application, a nanohybrid composite resin was inserted into the bonded surface. The specimens were placed in a universal testing machine. The shear bond strength was performed at a cross-head speed of 1 mm/min until the sample rupture. The shear bond strength values (MPa) of the different groups were compared with analysis of variance after that Kolmogorov and Smirnov tests were applied to assess normality of distributions. P enamel shear bond strength, the highest shear bond strength values were reported with Futurabond NR (P adhesive systems showed lower shear bond strength values with significant differences between them (P 0.05). Conclusion: The pH values of adhesive systems did not influence significantly their shear bond strength to enamel or dentin. PMID:26005459

  7. Fatigue Strength Estimation Based on Local Mechanical Properties for Aluminum Alloy FSW Joints

    Kittima Sillapasa

    2017-02-01

    Full Text Available Overall fatigue strengths and hardness distributions of the aluminum alloy similar and dissimilar friction stir welding (FSW joints were determined. The local fatigue strengths as well as local tensile strengths were also obtained by using small round bar specimens extracted from specific locations, such as the stir zone, heat affected zone, and base metal. It was found from the results that fatigue fracture of the FSW joint plate specimen occurred at the location of the lowest local fatigue strength as well as the lowest hardness, regardless of microstructural evolution. To estimate the fatigue strengths of aluminum alloy FSW joints from the hardness measurements, the relationship between fatigue strength and hardness for aluminum alloys was investigated based on the present experimental results and the available wide range of data from the references. It was found as: σa (R = −1 = 1.68 HV (σa is in MPa and HV has no unit. It was also confirmed that the estimated fatigue strengths were in good agreement with the experimental results for aluminum alloy FSW joints.

  8. The Effects of Isokinetic Strength Training on Strength at Different Angular Velocities: a Pilot Study

    Tuğba Kocahan

    2017-09-01

    Conclusion: It was shown that angular velocity is important in isokinetic training, and that training at high angular velocities provides strength increases at lower angular velocities, but would not increase strength at angular velocities above the training level. For this reason, it is thought that in the preparation of an isokinetic strength training protocol, angular velocities need to be taken into account. For any athlete, the force at the angular velocity required in her/his sports branch needs to be considered.

  9. Comparison and Analysis of Steel Frame Based on High Strength Column and Normal Strength Column

    Liu, Taiyu; An, Yuwei

    2018-01-01

    The anti-seismic performance of high strength steel has restricted its industrialization in civil buildings. In order to study the influence of high strength steel column on frame structure, three models are designed through MIDAS/GEN finite element software. By comparing the seismic performance and economic performance of the three models, the three different structures are comprehensively evaluated to provide some references for the development of high strength steel in steel structure.

  10. Strength Training Following Hematopoietic Stem Cell Transplantation

    Hacker, Eileen Danaher; Larson, Janet; Kujath, Amber; Peace, David; Rondelli, Damiano; Gaston, Lisa

    2010-01-01

    Background Patients receiving high-dose chemotherapy and hematopoietic stem cell transplantation (HSCT) experience considerable reductions in physical activity and deterioration of their health status. Objective The purpose of this pilot study was to test the effects of strength training compared to usual activity on physical activity, muscle strength, fatigue, health status perceptions, and quality of life following HSCT. Interventions/Methods Nineteen subjects were randomized to the exercise or control group. Moderate intensity strength training began following discharge from the hospital. Dependent variables included physical activity, muscle strength, fatigue, health status perceptions and quality of life. Variables were measured prior to admission to the hospital for HSCT, day 8 following HSCT, and six weeks following discharge from the hospital. Results Significant time effects were noted for many variables with anticipated declines in physical activity, muscle strength, fatigue, and health status perceptions immediately after HSCT with subsequent improvements six weeks following hospital discharge. One group effect was noted with subjects in the exercise group reporting less fatigue than subjects in the control group. Although no significant interactions were detected, the trends suggest that the exercise group may be more physically active following the intervention compared to the usual activity group. Conclusions This study demonstrates the potential positive effects of strength training on physical activity, fatigue, and quality of life in people receiving high-dose chemotherapy and HSCT. Implications for Practice Preliminary evidence is provided for using strength training to enhance early recovery following HSCT. Elastic resistance bands are easy to use and relatively inexpensive. PMID:21116175

  11. Mechanical strength development of mortars containing volcanic scoria-based binders with different fineness

    Aref M. al-Swaidani

    2016-06-01

    Full Text Available The benefits of using natural pozzolan as cement replacement are often associated with shortcomings such as the need to moist-curing for longer time and a reduction of strength at early ages. The objective of the study is to investigate the influence of binder fineness on the mechanical strength development of scoria-based binder mortars. In the study, mortar specimens have been produced with four types of binder: one plain Portland cement (control and three scoria-based binders with three replacement levels: 25%, 30% and 35%, respectively. All scoria-based binders have been inter-ground into four different Blaine fineness: 2400, 3200, 4200 and 5100 cm2/g. The development of the compressive and flexural tensile strength of all mortar specimens with curing time has been investigated. The effects of the Blaine fineness of the scoria-based blended cement on the compressive and flexural strengths of mortar have been evaluated at curing ages of 2, 7, 28 and 90 days, respectively. Particle size distribution measured by a laser diffractometer has been considered in the study. Test results revealed that there is a decrease in strength with increasing amounts of scoria. In addition, there was found an increase in strength with increasing the Blaine fineness values. No direct relationship between Blaine and particle size distribution was observed. Effects of Blaine fineness on some physical properties of blended cements such as water demand, setting times and soundness have also been investigated. Further, an estimation equation for strength development incorporating the effects of fineness measured either by Blaine or by particle size distribution has been derived by the authors.

  12. Influence of silica fume on the strength of high strength concrete

    Akram, T.; Memon, S.A.; Khan, S.A.

    2007-01-01

    HSC (High Strength Concrete) does not become evident by a sudden change in the behavior of 'ordinary strength' concrete. There is a gradual effect that becomes more noticeable when the strength level exceeds about 40-45 MPa. There cannot be a precise level of strength which defines this change in effect. The effects are on strength and workability, requiring us to take into account in our mix proportioning, the ramifications of fineness of cement on workability and of type of aggregate and aggregate/cement ratio on strength. In fact, the selection of materials becomes more critical as the concrete strength increases and that if very high strength is required (100 MPa and higher), relatively few materials may be suitable. An experimental investigation is carried out to evaluate the feasibility of producing HSC using locally available materials and to study the influence of silica fume on the strength of HSC. The main variables in this research is amount of silica fume. The parameters that are kept constant are the amount of cement equal to 580 kg/m3, dosage of HRWRA (High Range Water Reducing Admictures) equal to 4 % by weight of cementitious materials and the ratio of fine aggregate to coarse aggregate (1:2.3). Test results revealed that it is feasible to produce HSC using locally available materials. The optimum percentage of silica fume was found to be 15 % by weight of cement. (author)

  13. Evaluation of in-place concrete strength by core testing.

    2016-11-01

    The overall objective of the work contained in this report is to develop an ALDOT procedure to evaluate core strength results obtained under various conditions. Since there are many factors that influence the apparent strength of cores, strength corr...

  14. Short Communications Strength Properties and Groups of Major ...

    Short Communications Strength Properties and Groups of Major Commercial Timbers Grown in Kenya. ... The strength groups developed revealed that most species in Kenya are suitable for heavy engineering works and building construction. ... strength properties, commercial timber, physical and mechanical properties

  15. A Confirmatory Approach to Examining the Factor Structure of the Strengths and Difficulties Questionnaire (SDQ)

    Niclasen, Janni; Skovgaard, Anne Mette; Andersen, Anne-Marie Nybo

    2013-01-01

    The aim of this study was to examine the factor structure of the Strengths and Difficulties Questionnaire (SDQ) using a Structural Confirmatory Factor Analytic approach. The Danish translation of the SDQ was distributed to 71,840 parents and teachers of 5-7 and 10-12-year-old boys and girls from ...

  16. Investigating Strength and Frequency Effects in Recognition Memory Using Type-2 Signal Detection Theory

    Higham, Philip A.; Perfect, Timothy J.; Bruno, Davide

    2009-01-01

    Criterion- versus distribution-shift accounts of frequency and strength effects in recognition memory were investigated with Type-2 signal detection receiver operating characteristic (ROC) analysis, which provides a measure of metacognitive monitoring. Experiment 1 demonstrated a frequency-based mirror effect, with a higher hit rate and lower…

  17. The Bethe Sum Rule and Basis Set Selection in the Calculation of Generalized Oscillator Strengths

    Cabrera-Trujillo, Remigio; Sabin, John R.; Oddershede, Jens

    1999-01-01

    Fulfillment of the Bethe sum rule may be construed as a measure of basis set quality for atomic and molecular properties involving the generalized oscillator strength distribution. It is first shown that, in the case of a complete basis, the Bethe sum rule is fulfilled exactly in the random phase...

  18. Concentration of E2 strength near the fission barrier of 232Th

    Arruda Neto, J.D.T.; Vannucci, M.F.B.M.; Herdade, S.B.; Vannucci, A.; Nascimento, I.C. do.

    1981-08-01

    The electrofission angular distribution of 232 Th, in the energy interval 5.5-7 MeV, was measured. The analysis of substantial amount of E2 fission strength is concentrated near the fission barrier, corresponding to (8 +- 2)% of one energy weighted sum rule unity. (Author) [pt

  19. Prediction of compressive strength up to 28 days from microstructure of Portland cement

    Svinning, K.; Høskuldsson, Agnar; Justnes, H.

    2008-01-01

    represented by curves from X-ray diffraction analysis and differential thermogravimetric analysis, as well as particle size distributions. PLS gave maximum explained variance in compressive strength at 1, 2, 7 and 28 days of 93%, 90%, 79% and 67%, respectively. The high explained variance makes the prediction...

  20. Thermal Inertia of near-Earth Asteroids and Strength of the Yarkovsky Effect

    Delbo, Marco; Dell'Oro, A.; Harris, A. W.; Mottola, S.; Mueller, M.

    2006-01-01

    Thermal inertia is the physical parameter that controls the temperature distribution over the surface of an asteroid. It affects the strength of the Yarkovsky effect, which causes orbital drift of km-sized asteroids and is invoked to explain the delivery of near-Earth asteroids (NEAs) from the main