Galls and gall makers in plants from the Pé-de-Gigante Cerrado Reserve, Santa Rita do Passa Quatro, SP, Brazil.

Science.gov (United States)

Urso-Guimarães, M V; Scareli-Santos, C

2006-02-01

Thirty-six morphologically different types of galls were obtained in leaves, leaflets, veins, petioles, stems, tendrils and flower buds from twenty-five species of plants in the Pé-de-Gigante Reserve, municipality of Santa Rita do Passa Quatro, state of São Paulo, Brazil. The host plant species belong to the closely related families Anacardiaceae, Annonaceae, Asteraceae, Bignoniaceae, Caryocaraceae, Erythroxylaceae, Fabaceae, Malpighiaceae, Melastomataceae, Myrtaceae, Ochnaceae, Polygalaceae, Sapindaceae, Sapotaceae, and Smilacaceae. The most common gall makers included Cecidomyiidae (Diptera), Pteromalidae (Hymenoptera) and Diaspididae (Sternorrhyncha-Hemiptera). This is the first report of galls found in the following plant genera: Gochnatia (Asteraceae), Distictela (Bignoniaceae), Banisteriopsis (Malpighiaceae), Ouratea (Ochnaceae), and Bredemeyera (Polygalaceae). The results of this work contribute to the body of knowledge about the relationship among host plants, gall makers, and the gall morphology of Pé-de-Gigante Cerrado Reserve.

Galls and gall makers in plants from the Pé-de-Gigante Cerrado Reserve, Santa Rita do Passa Quatro, SP, Brazil

Directory of Open Access Journals (Sweden)

M. V. Urso-Guimarães

Full Text Available Thirty-six morphologically different types of galls were obtained in leaves, leaflets, veins, petioles, stems, tendrils and flower buds from twenty-five species of plants in the Pé-de-Gigante Reserve, municipality of Santa Rita do Passa Quatro, state of São Paulo, Brazil. The host plant species belong to the closely related families Anacardiaceae, Annonaceae, Asteraceae, Bignoniaceae, Caryocaraceae, Erythroxylaceae, Fabaceae, Malpighiaceae, Melastomataceae, Myrtaceae, Ochnaceae, Polygalaceae, Sapindaceae, Sapotaceae, and Smilacaceae. The most common gall makers included Cecidomyiidae (Diptera, Pteromalidae (Hymenoptera and Diaspididae (Sternorrhyncha-Hemiptera. This is the first report of galls found in the following plant genera: Gochnatia (Asteraceae, Distictela (Bignoniaceae, Banisteriopsis (Malpighiaceae, Ouratea (Ochnaceae, and Bredemeyera (Polygalaceae. The results of this work contribute to the body of knowledge about the relationship among host plants, gall makers, and the gall morphology of Pé-de-Gigante Cerrado Reserve.

Analysis of iron gall inks by PIXE

Energy Technology Data Exchange (ETDEWEB)

Budnar, Milos [Jozef Stefan Institute, Jamova 39, p.p. 3000, SI-1001 Ljubljana (Slovenia)]. E-mail: milos.budnar@ijs.si; Ursic, Mitja [Jozef Stefan Institute, Jamova 39, p.p. 3000, SI-1001 Ljubljana (Slovenia); Simcic, Jure [Jozef Stefan Institute, Jamova 39, p.p. 3000, SI-1001 Ljubljana (Slovenia); Pelicon, Primoz [Jozef Stefan Institute, Jamova 39, p.p. 3000, SI-1001 Ljubljana (Slovenia); Kolar, Jana [National University Library, Turjaska 1, SI-1000 Ljubljana (Slovenia); Selih, Vid Simon [University of Ljubljana, Faculty of Chemistry and Chemical Technology, Askerceva 5, SI-1000 Ljubljana (Slovenia); Strlic, Matija [University of Ljubljana, Faculty of Chemistry and Chemical Technology, Askerceva 5, SI-1000 Ljubljana (Slovenia)

2006-02-15

Micro- or non-destructive analytical approach is an imperative when analysing historical artefacts. Due to its practically non-destructive character, proton induced X-ray spectrometry (PIXE) has become a method of choice for the study of historical documents. In the present paper, use of in-air PIXE method for analysis of iron gall inks applied at handwriting of documents is evaluated. The errors arising from the non-uniform ink deposit, proton penetration depth and size of the proton beam versus width of ink lines, effects of surface roughness, as well as the importance of the PIXE set-up geometry on the accuracy of the results are discussed. It follows that the main problems can be attributed to the fact that PIXE is a surface technique and that the analysis is limited to a small amount of material, while ink deposit on the paper is usually non-uniform in depth as well as on the paper surface. Despite possible systematic uncertainties when applying the PIXE method, good correlation between determinations obtained by PIXE and atomic absorption spectroscopy (AAS) on model samples clearly demonstrate that the errors are well within a reasonable limit of a few percents.

Analysis of iron gall inks by PIXE

International Nuclear Information System (INIS)

Budnar, Milos; Ursic, Mitja; Simcic, Jure; Pelicon, Primoz; Kolar, Jana; Selih, Vid Simon; Strlic, Matija

2006-01-01

Micro- or non-destructive analytical approach is an imperative when analysing historical artefacts. Due to its practically non-destructive character, proton induced X-ray spectrometry (PIXE) has become a method of choice for the study of historical documents. In the present paper, use of in-air PIXE method for analysis of iron gall inks applied at handwriting of documents is evaluated. The errors arising from the non-uniform ink deposit, proton penetration depth and size of the proton beam versus width of ink lines, effects of surface roughness, as well as the importance of the PIXE set-up geometry on the accuracy of the results are discussed. It follows that the main problems can be attributed to the fact that PIXE is a surface technique and that the analysis is limited to a small amount of material, while ink deposit on the paper is usually non-uniform in depth as well as on the paper surface. Despite possible systematic uncertainties when applying the PIXE method, good correlation between determinations obtained by PIXE and atomic absorption spectroscopy (AAS) on model samples clearly demonstrate that the errors are well within a reasonable limit of a few percents

What should I do about my patient's gall stones?

Science.gov (United States)

Dennison, A R; Azoulay, D; Oakley, N; Baer, H; Paraskevopoulos, J A; Maddern, G J

1995-12-01

The problem of benign biliary disease is one that causes significant morbidity and social economic strain in the western world. The classical treatment, cholecystectomy, has been challenged by various medical and surgical techniques in a seemingly random nature. The development of the treatment of gall stone disease is reviewed by analysis of published studies over the last 20 years. The advantages and disadvantages are discussed as an overview and summary of the current management of gall stone disease in the light of our knowledge of its malignant potential.

DNA methylation mediated control of gene expression is critical for development of crown gall tumors.

Directory of Open Access Journals (Sweden)

Jochen Gohlke

Full Text Available Crown gall tumors develop after integration of the T-DNA of virulent Agrobacterium tumefaciens strains into the plant genome. Expression of the T-DNA-encoded oncogenes triggers proliferation and differentiation of transformed plant cells. Crown gall development is known to be accompanied by global changes in transcription, metabolite levels, and physiological processes. High levels of abscisic acid (ABA in crown galls regulate expression of drought stress responsive genes and mediate drought stress acclimation, which is essential for wild-type-like tumor growth. An impact of epigenetic processes such as DNA methylation on crown gall development has been suggested; however, it has not yet been investigated comprehensively. In this study, the methylation pattern of Arabidopsis thaliana crown galls was analyzed on a genome-wide scale as well as at the single gene level. Bisulfite sequencing analysis revealed that the oncogenes Ipt, IaaH, and IaaM were unmethylated in crown galls. Nevertheless, the oncogenes were susceptible to siRNA-mediated methylation, which inhibited their expression and subsequently crown gall growth. Genome arrays, hybridized with methylated DNA obtained by immunoprecipitation, revealed a globally hypermethylated crown gall genome, while promoters were rather hypomethylated. Mutants with reduced non-CG methylation developed larger tumors than the wild-type controls, indicating that hypermethylation inhibits plant tumor growth. The differential methylation pattern of crown galls and the stem tissue from which they originate correlated with transcriptional changes. Genes known to be transcriptionally inhibited by ABA and methylated in crown galls became promoter methylated upon treatment of A. thaliana with ABA. This suggests that the high ABA levels in crown galls may mediate DNA methylation and regulate expression of genes involved in drought stress protection. In summary, our studies provide evidence that epigenetic processes

Galling Insects of the Brazilian Páramos: Species Richness and Composition Along High-Altitude Grasslands.

Science.gov (United States)

Coelho, Marcel S; Carneiro, Marco Antônio Alves; Branco, Cristina A; Borges, Rafael Augusto Xavier; Fernandes, G Wilson

2017-12-08

In this work, we investigated the factors that determine the distribution of galling insects in high-altitude grasslands, locally called 'campos de altitude' of Mantiqueira Range and tested whether 1) richness of galling insects decreases with altitude, 2) galling insect richness increases with plant richness, 3) variation in galling insect diversity is predominantly a consequence of its β component, and 4) turnover is the main mechanism driving the beta diversity of both galling insects and plants. Galling insect richness did not exhibit a negative relationship with altitude, but it did increase with plant richness. The additive partition of regional richness (γ) into its local and beta components showed that local diversity (α) of galling insects and plants was relatively low in relation to regional diversity; the β component incorporated most of the regional diversity. This pattern was also found in the multiscale analysis of the additive partition for galling insects and plants. The beta diversity of galling insects and plants was driven predominantly by the process of turnover and minimally by nesting. The results reported here point out that the spatial distribution of galling insects is best explained by historical factors, such as the distribution of genera and species of key host plants, as well as their relation to habitat, than ecological effects such as hygrothermal stress - here represented by altitude. © The Authors 2017. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

The biology of gall-inducing arthropods.

Science.gov (United States)

Gyuri Csoka; William J. Mattson; Graham N. Stone; Peter W. Price

1998-01-01

This proceedings explores many facets of the ever intriguing and enigmatic relationships between plants and their gall-forming herbivores. The research reported herein ranges from studies on classical biology and systematics of galling to molecular phylogeny, population genetics, and ecological and evolutionary theory. Human kind has much to learn and gain from...

Unusual presentation of metastatic gall bladder cancer

Directory of Open Access Journals (Sweden)

Piyush Shukla

2014-01-01

Full Text Available To report the first case of rare isolated breast metastasis from carcinoma gall bladder. Single patient case report. A 35-year-old pre-menopausal female presented with 2 FNx01 2 cm right upper outer quadrant breast lump. Post-mastectomy, histology confirmed it to be metastatic adenocarcinoma positive for both Cytokeratin (CK 7 and CK20. Past history as told by the patient revealed that 2 years back, cholecystectomy was performed for gall stones, of which no histology reports were present; she had a port site scar recurrence which showed it to be adenocarcinoma. Adjuvant chemotherapy and radiotherapy was advised which the patient did not complete. This is probably the first case reported of isolated breast metastasis from gall bladder carcinoma, diagnosed retrospectively. It also highlights the importance of adjuvant treatment in gall bladder malignancy.

Fungal endophytes which invade insect galls: insect pathogens, benign saprophytes, or fungal inquilines?

Science.gov (United States)

Wilson, Dennis

1995-08-01

Fungi are frequently found within insect galls. However, the origin of these fungi, whether they are acting as pathogens, saprophytes invading already dead galls, or fungal inquilines which invade the gall but kill the gall maker by indirect means, is rarely investigated. A pathogenic role for these fungi is usually inferred but never tested. I chose the following leaf-galling-insect/host-plant pairs (1) a cynipid which forms two-chambered galls on the veins of Oregon white oak, (2) a cynipid which forms single-chambered galls on California coast live oak, and (3) an aphid which forms galls on narrowleaf cottonwood leaves. All pairs were reported to have fungi associated with dead insects inside the gall. These fungi were cultured and identified. For the two cynipids, all fungi found inside the galls were also present in the leaves as fungal endophytes. The cottonwood leaves examined did not harbor fungal endophytes. For the cynipid on Oregon white oak, the fungal endophyte grows from the leaf into the gall and infects all gall tissue but does not directly kill the gall maker. The insect dies as a result of the gall tissue dying from fungal infection. Therefore, the fungus acts as an inquiline. Approximately 12.5% of these galls die as a result of invasion by the fungal endophyte.

Sugary secretions of wasp galls: a want-to-be extrafloral nectar?

Science.gov (United States)

Aranda-Rickert, Adriana; Rothen, Carolina; Diez, Patricia; González, Ana María; Marazzi, Brigitte

2017-11-10

The most widespread form of protective mutualisms is represented by plants bearing extrafloral nectaries (EFNs) that attract ants and other arthropods for indirect defence. Another, but less common, form of sugary secretion for indirect defence occurs in galls induced by cynipid wasps. Until now, such galls have been reported only for cynipid wasps that infest oak trees in the northern hemisphere. This study provides the first evidence of galls that exude sugary secretions in the southern hemisphere and asks whether they can be considered as analogues of plants' EFNs. The ecology and anatomy of galls and the chemical composition of the secretion were investigated in north-western Argentina, in natural populations of the host trees Prosopis chilensis and P. flexuosa . To examine whether ants protect the galls from natural enemies, ant exclusion experiments were conducted in the field. The galls produce large amounts of sucrose-rich, nectar-like secretions. No typical nectary and sub-nectary parenchymatic tissues or secretory trichomes can be observed; instead there is a dense vascularization with phloem elements reaching the gall periphery. At least six species of ants, but also vespid wasps, Diptera and Coleoptera, consumed the gall secretions. The ant exclusion experiment showed that when ants tended galls, no differences were found in the rate of successful emergence of gall wasps or in the rate of parasitism and inquiline infestation compared with ant-excluded galls. The gall sugary secretion is not analogous to extrafloral nectar because no nectar-producing structure is associated with it, but is functionally equivalent to arthropod honeydew because it provides indirect defence to the plant parasite. As in other facultative mutualisms mediated by sugary secretions, the gall secretion triggers a complex multispecies interaction, in which the outcome of individual pair-wise interactions depends on the ecological context in which they take place. © The Author

Insect galls from Serra de São José (Tiradentes, MG, Brazil

Directory of Open Access Journals (Sweden)

V. C. Maia

Full Text Available One hundred thirty-seven morphotypes of insect galls were found on 73 plant species (47 genera and 30 families in Serra de São José, in Tiradentes, MG, Brazil. Fabaceae, Myrtaceae, Asteraceae, and Melastomataceae were the plant families that supported most of the galls (49.6% of the total. Galls were mostly found on leaves and stems (66.4% and 25.5%, respectively. Galls were induced by Diptera, Lepidoptera, Coleoptera, Hemiptera (Sternorrhyncha, Hymenoptera, and Thysanoptera. The majority of them (73.7% were induced by gall midges (Cecidomyiidae: Diptera. Besides the gall inducers, other insects found associated with the galls were parasitoids (Hymenoptera, inquilines (Coleoptera, Lepidoptera, Diptera, and Hemiptera, and predators (Diptera.

Insect galls of Restinga de Marambaia (Barra de Guaratiba, Rio de Janeiro, RJ).

Science.gov (United States)

Maia, V C; Silva, L O

2016-04-19

Thirty-one morphotypes of insect galls and two flower damages were found on 16 families, 22 genera and 24 plant species in Restinga de Marambaia (Barra de Guaratiba, Rio de Janeiro, RJ). Fabaceae and Myrtaceae were the plant families with the greatest richness of insect galls (4 and 6 morphotypes, respectively), and the greatest number of galled plants (four and three species, respectively). Galls were mostly found on leaves and stems (77% and 10%, respectively). The galling insects are represented by Diptera, Lepidoptera, and Hemiptera. The majority of the galls (81%) were induced by gall midges (Cecidomyiidae: Diptera).

Review of the generic aging lessons learned (GALL) report for U.S. NPPs

International Nuclear Information System (INIS)

Gong Yi; Dou Yikang

2014-01-01

Generic aging lessons learned (GALL) report is a technical basis document issued by U.S. nuclear regulatory commission (NRC) for guiding the review of license renewal application (LRA) of its domestic nuclear power plants (NPPs). By form of tabulations, GALL report addresses the correlation among materials, environments, aging effects/mechanisms, and aging management programs (AMPs) from the level of specific structures and/or components. Based on literature investigation and analysis, the essential information of GALL report in the aspects of background, development history, content framework, and application was reviewed in this paper, which should be the first time in China and would have reference value for establishment of both the AMPs and the nuclear safety regulations of extending the lifetime of its NPPs. (authors)

Left-sided gall bladder: Report of two cases

Directory of Open Access Journals (Sweden)

Chrungoo R

2007-01-01

Full Text Available Left-sided gall bladder without situs inversus viscerum is a rare albeit recognized clinical entity. We report our experience of two cases of left-sided gall bladder in two women aged 36 and 48 who underwent laparoscopic cholecystectomy for chronic calculous cholecystitis. Left-sided gall bladder may provide an unusual surprise to the surgeons during laparoscopy as routine pre-operative studies may not always detect the anomaly. Awareness of the unpredictable confluence of the cystic duct into the common bile duct (CBD and selective use of intraoperative cholangiography aid in the safe laparoscopic management of this unusual entity.

Galling insects are bioindicators of environmental quality in a Conservation Unit

Directory of Open Access Journals (Sweden)

André Portugal Santana

2014-12-01

Full Text Available Galls are well distributed across the World and among plant families. Their diversity can support the status of conservation of an area as an urban park, once inventories are presented. These inventories also help to understand the morphological patterns of the galls, based on their most common shape, color, host botanical families, inducers and galled organs. This study is about an inventory of galls at Parque Estadual Serra Verde, Brazil. This conservation unit is an urban park strongly anthropized in a transition area of Cerrado and Mata Atlântica. Galls from four different trails were observed, and collected monthly during one year. The terminology morphospecies was used to distinguish the galls because the identification of the inducers were not always possible. Seventy five morphospecies of galls belonging to 43 host plant species of 24 botanical families were observed. Mostly of the galls was induced by Diptera:Cecidomyiidae, in Fabaceae and Myrtaceae. The most common traits were the globoid shape and green color. The leaves were the most frequent galled organ and followed by the stems. All these tendencies had been already observed in other inventories. Comparing current results with other studies at similar areas, we can assume that the Parque Estadual Serra Verde is very important for conservation. Urban green areas are subject to high disturbance and degradation but also increase the quality of life for the population inhabiting the areas nearby. The diversity of galls at Parque Estadual Serra Verde reflects an area with high levels of stress but with moderate botanical diversity. These features make this protected area an important site for the continuous conservation and regeneration, and highlight the environmental value of Parque Estadual Serra Verde.

A cadaveric study involving variations in external morphology of gall bladder

Directory of Open Access Journals (Sweden)

Anjankar Vaibhav Prakash, Panshewdikar Pradnyesh N, Joshi DS, Anjankar Ashish Prakash

2013-04-01

Full Text Available Background: Variations in the pattern of the extra hepatic biliary tract are usual and are commonly encountered during some radiological investigations or in operation theaters. Such Variations of the morphology of Gall bladder have been well documented in the literature for many years but a detail morphological study of variations of the gall bladder and its incidence is very rare. In this era of quick results, increasing use of diagnostic and interventional procedures makes it important to study variations of gall bladder morphology. Most of the interventional procedures in this modern era are done laparoscopically and there is tremendous increase in the number of laparoscopic cholecystectomies. So, sound knowledge of possible variations in morphology of gall bladder is important. Materials and Methods: This study was undertaken on 90 cadaveric liver and gall bladder specimens in terms of length, maximum transverse diameter, shape, external variations of gall bladder, Interior and length of gall bladder below the inferior border of the liver. Results: GB had length ranging between 7 and 10 cm, transverse diameter between 2 and 5 cm. The commonest shape observed in this study was pear shaped in 82.22% of cases. The length of gall bladder below the inferior border of liver varied between 0.4 and 2.5 cm. Conclusion: The growing importance of such variations, lie not only from the point of biliary disease but also with respect to the various invasive techniques in the diagnosis and treatment of gall bladder and extrahepatic bile duct disease.

Phylogeny of Rhus gall aphids (Hemiptera:Pemphigidae) based on combined molecular analysis of nuclear EF1α and mitochondrial COII genes

Science.gov (United States)

Zi-xiang Yang; Xiao-ming Chen; Nathan P. Havill; Ying Feng; Hang. Chen

2010-01-01

Rhus gall aphids (Fordinae : Melaphidini) have a disjunct distribution in East Asia and North America and have specific host plant relationships. Some of them are of economic importance and all species form sealed galls which show great variation in shape, size, structure, and galling-site. We present a phylogeny incorporating ten species and four...

Antioxidant activity of insect gall extracts of Pistacia integerrima.

Science.gov (United States)

Eshwarappa, Ravi Shankara Birur; Lakshmikantha, Ramachandra Yarappa; Subaramaihha, Sundara Rajan; Subbaiah, Sujan Ganapathy Pasura; Surendranath, Austin Richard; Dhananjaya, Bhadrapura Lakkappa

2015-01-01

Pistacia integerrima (P. integerrina) insect galls are widely used in ayurveda and siddha system of medicine as karkatasringi. The use of leaf galls as a rejuvenator may be attributed to antioxidant property, however there is less scientific evidence. Therefore, the aim of this study was to evaluate the chemical composition and the antioxidant potential of leaf gall extracts (aqueous and ethanol) of P. integerrina, which is extensively used in the preparation of traditional medications. The antioxidant activities of aqueous and ethanolic leaf gall extracts were examined using diphenylpicrylhydrazyl (DPPH), hydroxyl scavenging and ferric reducing power (FRAP) methods. The presences of phenolics, tannins, phytosterols, triterpenoids, saponins, flavonoids and reducing sugars were identified in both the extracts. In comparison to the aqueous extract, the ethanolic extract had the highest total phenolic and flavonoid content at 234 ±2.4 mg of GAE/g d.w. and 95.5 ±3.2 mg of QUE/g d.w., respectively. This higher content of total phenolics and flavonoids found in the ethanolic extract was directly associated with higher antioxidant activity. This study demonstrates the poetnet antioxidant activities of P. integerrima leaf gall extracts. Further, there was a strong association between the higher antioxidant activities with that of higher total phenolic and flavonoid content in the ethanolic leaf gall extracts of P. integerrima. The results encourage the use of P. integerrima leaf gall extracts for medicinal health, functional food and nutraceuticals applications, due to their antioxidant properties. Future work will be interesting to learn the chemical composition and better understand the mechanism of action of the antioxidants present in the extract for development as a drug for therapeutic application.

The molecular genetics of crown gall tumorigenesis

International Nuclear Information System (INIS)

Hooykaas, P.J.J.; Schilperoort, R.A.

1984-01-01

The phytopathogenic bacteria Agrobacterium tumefaciens and A. rhizogenes are the causative agents of the widespread plant diseases ''crown gall'' and ''hairy root'' respectively. It is now well established that virulent strains of these bacterial species transfer a piece of bacterial DNA into plant cells, thereby transforming these into tumor cells. In research much attention has been paid to the agrobacteria for several reasons. First is the desire to develop a system for the genetic engineering of plant cells based on the natural system for gene transfer between Agrobacterium species and plant cells. Second, there is a striking resemblance between the etiology of animal cancers and the plant cancer crown gall that was recognized as early as in 1927. This led to basic studies on the process of plant tumor induction and on the recovery of plant cells from the tumorous state. A third important interest lies in crown gall as a disease that is the cause of economically important losses in agriculture an horticulture in Europe, North America, and Austrailia. Research has been aimed at finding means to prevent crown gall and to cure plants of this disease

Diversity of insect galls associated with coastal shrub vegetation in Rio de Janeiro, Brazil.

Science.gov (United States)

Carvalho-Fernandes, Sheila P; Ascendino, Sharlene; Maia, Valéria C; Couri, Márcia S

2016-09-01

Surveys in the coastal sandy plains (restingas) of Rio de Janeiro have shown a great richness of galls. We investigated the galling insects in two preserved restingas areas of Rio de Janeiro state: Parque Estadual da Costa do Sol and Reserva Particular do Patrimônio Natural Fazenda Caruara. The collections were done each two months, from June 2011 to May 2012. We investigated 38 points during 45 minutes each per collection. The galls were taken to the laboratory for rearing the insects. A total number of 151 insect galls were found in 82 plant species distributed into 34 botanic families. Most of the galls occurred on leaves and the plant families with the highest richness of galls were Myrtaceae and Fabaceae. All the six insect orders with galling species were found in this survey, where Cecidomyiidae (Diptera) was the main galler group. Hymenoptera and Thysanoptera were found as parasitoids and inquilines in 29 galls. The richness of galls in the surveyed areas reveals the importance of restinga for the composition and diversity of gall-inducing insect fauna.

Diversity of insect galls associated with coastal shrub vegetation in Rio de Janeiro, Brazil

Directory of Open Access Journals (Sweden)

SHEILA P. CARVALHO-FERNANDES

Full Text Available ABSTRACT Surveys in the coastal sandy plains (restingas of Rio de Janeiro have shown a great richness of galls. We investigated the galling insects in two preserved restingas areas of Rio de Janeiro state: Parque Estadual da Costa do Sol and Reserva Particular do Patrimônio Natural Fazenda Caruara. The collections were done each two months, from June 2011 to May 2012. We investigated 38 points during 45 minutes each per collection. The galls were taken to the laboratory for rearing the insects. A total number of 151 insect galls were found in 82 plant species distributed into 34 botanic families. Most of the galls occurred on leaves and the plant families with the highest richness of galls were Myrtaceae and Fabaceae. All the six insect orders with galling species were found in this survey, where Cecidomyiidae (Diptera was the main galler group. Hymenoptera and Thysanoptera were found as parasitoids and inquilines in 29 galls. The richness of galls in the surveyed areas reveals the importance of restinga for the composition and diversity of gall-inducing insect fauna.

Species turnover drives β-diversity patterns across multiple spatial scales of plant-galling interactions in mountaintop grasslands.

Science.gov (United States)

Coelho, Marcel Serra; Carneiro, Marco Antônio Alves; Branco, Cristina Alves; Borges, Rafael Augusto Xavier; Fernandes, Geraldo Wilson

2018-01-01

This study describes differences in species richness and composition of the assemblages of galling insects and their host plants at different spatial scales. Sampling was conducted along altitudinal gradients composed of campos rupestres and campos de altitude of two mountain complexes in southeastern Brazil: Espinhaço Range and Mantiqueira Range. The following hypotheses were tested: i) local and regional richness of host plants and galling insects are positively correlated; ii) beta diversity is the most important component of regional diversity of host plants and galling insects; and iii) Turnover is the main mechanism driving beta diversity of both host plants and galling insects. Local richness of galling insects and host plants increased with increasing regional richness of species, suggesting a pattern of unsaturated communities. The additive partition of regional richness (γ) into local and beta components shows that local richnesses (α) of species of galling insects and host plants are low relative to regional richness; the beta (β) component incorporates most of the regional richness. The multi-scale analysis of additive partitioning showed similar patterns for galling insects and host plants with the local component (α) incorporated a small part of regional richness. Beta diversity of galling insects and host plants were mainly the result of turnover, with little contribution from nesting. Although the species composition of galling insects and host plant species varied among sample sites, mountains and even mountain ranges, local richness remained relatively low. In this way, the addition of local habitats with different landscapes substantially affects regional richness. Each mountain contributes fundamentally to the composition of regional diversity of galling insects and host plants, and so the design of future conservation strategies should incorporate multiple scales.

Distributional record of oak gall wasp (Hymenoptera: Cynipidae ...

African Journals Online (AJOL)

In this survey, oak gall wasp species were collected from the oak forests of Pardanan, Mirabad, Nalas, Sardasht, Hamran and Dar-ghabr in West-Azerbaijan province. The galls occurring on 50 cm sampled branches from four cardinal directions on each tree were counted multiple times throughout the season. Species ...

The Goldenrod Ball Gall

Science.gov (United States)

Fischer, Richard B.

1974-01-01

The paper presents a generalized life history of the goldenrod ball gall, a ball-shaped swelling found almost exclusively on the Canada goldenrod, Solidago canadensis, and caused by a peacock fly know as Eurosta soldiaginis. (KM)

Sonographic Analysis of the Collapsed Gall Bladder

International Nuclear Information System (INIS)

Han, Sang Suk; Choi, Jae Young; Choi, Seok Jin; Eun, Chung Ki; Nam, Kyung Jin; Lee, Jeong Mi

1996-01-01

This study was done to find answers for further following questions in cases of the collapsed gallbladder (GB) : What is the probability of the presence of stone when stony echo is visible in GB area? What is the probability of the presence of stone when only acoustic shadow is visible from GB area? What are the associated GB pathologies except stone or cholecystitis in previously mentioned situations and is it possible to differentiate them? What are the underlying pathologies of GB collapse without stony echo or acoustic shadow and is it possible to differentiate them sonographic ally? What are the rate and causes of re-expansion of the collapsed GB on follow-up study? Prospective study was done in 157 cases of collapsed GB with no visible or nearly no visible bile filled lumen in recent 3 years. Sonographic analysis for GB lesions was done in 61 confirmed cases. Changing pattern of GB lumen on follow-up study and their underlying pathologies were analyzed in 28 cases. Initial sonographic examination was done with 3 or 3.5 MHz transducer. No other transducer was used in cases showing stony echo or acoustic shadow in GB area, but additional examination was done with 5 or 7-4 MHz transducer in cases without stony echo or acoustic shadow. Among 31 cases, which showed stony echo, stone was found in 30 cases and milk of calcium bile in one case. Stone was present in all of the 11 cases which showed only acoustic shadow from the collapsed GB without stony echo. GB cancer was accompanied in 2 cases among upper 42 cases, and its possibility could be suspected sonographic ally. Underlying pathologies of the 19cases without stony echo or acoustic shadow were as follows : GB stone (3), cholecystitis (6), GB cancer (1), bile plug syndrome (1), hepatitis (5), and ascites (3). And sonographic differentiation of the underlying causes for the collapse was possible in only 1 case of GB cancer. Among 28 cases of the follow-up study, 20 cases showed re-expansion of the GB lumen and

OCCURRENCE AND CHARACTERIZATION OF INSECT GALLS IN THE FLORESTA NACIONAL DE SILVÂNIA, BRAZIL

Directory of Open Access Journals (Sweden)

BÁRBARA ARAÚJO RIBEIRO BERGAMINI

Full Text Available ABSTRACT In the present paper we investigated the insect gall distribution along savanna and forest sites in the Floresta Nacional de Silvânia, Goiás, Brazil. The insect gall fauna was surveyed bi-monthly between December 2009 and June 2010. In total we found 186 insect gall morphotypes, distributed on 35 botanical families and 61 plant species. Ninety-nine insect gall morphotypes were recorded in the forest and 87 in the savanna. Gall-inducing insects belonged to Coleoptera, Diptera, Hemiptera, Lepidoptera and Thysanoptera, with highlight to Cecidomyiidae (Diptera that induced 34.1% of the gall morphotypes. Parasitoids and/or inquilines were recorded in 38 morphotypes, mainly from the families Eulophidae, Eurytomidae and Torymidae (Hymenoptera. Fabaceae was the botanical family with the greatest richness of galls, followed by Asteraceae and Sapindaceae, being Protium (Burseraceae, Siparuna (Siparunaceae and Serjania (Sapindaceae the main host genera. This is the first systematic survey of insect galls realized in the Flona-Silvânia, which result in six plant species are recorded for the first time in Brazil as host of insect galls.

The relevance of folkloric usage of plant galls as medicines: Finding the scientific rationale.

Science.gov (United States)

Patel, Seema; Rauf, Abdur; Khan, Haroon

2018-01-01

Galls, the abnormal growths in plants, induced by virus, bacteria, fungi, nematodes, arthropods, or even other plants, are akin to cancers in fauna. The galls which occur in a myriad of forms are phytochemically-distinct from the normal plant tissues, for these are the sites of tug-of-war, just like the granuloma in animals. To counter the stressors, in the form of the effector proteins of the invaders, the host plants elaborate a large repertoire of metabolites, which they normally will not produce. Perturbation of the jasmonic acid pathway, and the overexpression of auxin, and cytokinin, promote the tissue proliferation and the resultant galls. Though the plant family characteristics and the attackers determine the gall biochemistry, most of the galls are rich in bioactive phytochemicals such as phenolic acids, anthocyanins, purpurogallin, flavonoids, tannins, steroids, triterpenes, alkaloids, lipophilic components (tanshinone) etc. Throughout the long trajectory of evolution, humans have learned to use the galls as therapeutics, much like other plant parts. In diverse cultures, the evidence of folkloric usage of galls abound. Among others, galls from the plant genus like Rhus, Pistacia, Quercus, Terminalia etc. are popular as ethnomedicine. This review mines the literature on galling agents, and the medicinal relevance of galls. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

Diversity of gall-inducing insects in the high altitude wetland forests in Pernambuco, Northeastern Brazil

Directory of Open Access Journals (Sweden)

JC Santos

Full Text Available We report on the richness of galling insects in the altitudinal wetland forests of Pernambuco State, Northeastern Brazil. We found 80 distinct types of insect galls on 49 species of host plants belonging to 28 families and 35 genera. Most of the galled plant species belong to Nyctaginaceae, Fabaceae, Meliaceae, Sapindaceae and Myrtaceae. The most common gall were spheroid and globoid; most galls were glabrous, predominantly green and with one chamber, and on the leaves. Most galls were induced by Cecidomyiidae (Diptera. The results of this study contribute to existing knowledge richness of galling insects and host-plant diversity in the altitudinal wetland forests of Northeastern Brazil.

Morphological alterations of the gall-bladder following extracorporeal shock-wave lithotripsy

International Nuclear Information System (INIS)

Schumacher, K.A.; Zoeller, A.; Swobodnik, W.; Janowitz, P.

1990-01-01

The present study reports on 51 patients with symptomatic cholecystolithiasis, who accordingly underwent extracorporeal shock-wave lithotripsy (ESWL). In all cases, computed tomography (CT) was performed prior to and after the therapeutic procedure to delineate changes in gall-bladder morphology. Slight edematous thickening of the gall-bladder wall was found in 15 patients. One patient presented a rupture of the gall-bladder with formation of a bilioma in the adjacent liver tissue. In case of calcific concrements, CT revealed a characteristic pattern of fragment distribution following shock-wave treatment, and fragments of various sizes exhibited distinct adhesion to the gall-bladder wall. (orig.) [de

Gall-inducing insects of deciduous and semideciduous forests in Rio Grande do Sul State, Brazil

Directory of Open Access Journals (Sweden)

Ana Paula M. Goetz

2018-06-01

Full Text Available ABSTRACT Galls are specific changes induced by insects on plant organs mainly through increases in plant cell number and/or size. Gall diversity is easy to recognize in the field because gallers are mostly species-specific, and thus each gall morphotype can be a proxy for a galling species. Insect galls are virtually unknown in Seasonal Deciduous and Semi-Deciduous forests of southern Brazil. Here, galls and host plants were surveyed between 2015 and 2017 in four forest fragments of Rio Grande do Sul State in these two vegetation types, in secondary-growth and areas under restoration. We recorded 89 gall morphotypes, with gallers belonging to Lepidoptera and Diptera, with the latter represented mainly by Cecidomyiidae. Galls were associated to 46 plant species in 27 families. Asteraceae, Piperaceae, Fabaceae, Myrtaceae and Lauraceae were the richest families in terms of galls, whilst Piper aduncum and Mikania glomerata were superhosts. Most galls occurred in leaves and shoots. The most common shapes were fusiform, globoid and lenticular. Forty-eight gall morphotype records are new for both Rio Grande do Sul and Brazil, an expressive number considering only two seasonal forest types sampled and few sampling points, showing how important surveys still are for these little know fauna both in taxonomic and ecological terms.

Life History of the Camelthorn Gall Leafhopper, Scenergates viridis (Vilbaste (Hemiptera, Cicadellidae

Directory of Open Access Journals (Sweden)

Roman Rakitov

2012-01-01

Full Text Available The world’s only member of Hemiptera Auchenorrhyncha known to form true galls, the leafhopper Scenergates viridis (Vilbaste (Cicadellidae, transforms leaves of camelthorn (Alhagi maurorum Medikus, Fabaceae into pod-like chambers, up to 35 mm long, inside which individual leafhoppers develop, mate, and lay eggs. At the study site 40 km SE of Bukhara (Uzbekistan, two generations develop annually. First-instar nymphs cause young leaves to fold along the midrib. The subsequent development takes place inside the tightly closed growing gall, plugged at both ends with a mixture of leafhopper excrement, brochosomes, and crushed exuviae. These plugs act as mechanical barriers and sticky traps for intruders. The inner surface of the gall, lined with brochosomes and wax platelets, is hydrophobic. Adult males emerge from their galls and squeeze into female galls. Fertilized females insert an average of 146 eggs under the gall’s inner epidermis and remain inside, possibly protecting the brood, until they die. The walls of the galls containing eggs are approximately three times thicker than regular leaves. The galls are subject to predation by Gelechiidae caterpillars; the eggs of the leafhopper are parasitized by two species of Trichogrammatidae and one Mymaridae (Hymenoptera, and its larvae by one species of Pipunculidae (Diptera.

Insect galls of restinga areas of Ilha da Marambaia, Rio de Janeiro, Brazil

Directory of Open Access Journals (Sweden)

Alene Ramos Rodrigues

2014-06-01

Full Text Available Insect galls of restinga areas of Ilha da Marambaia, Rio de Janeiro, Brazil. This study carried out an insect gall inventory in restinga areas of Ilha da Marambaia, in the municipality of Mangaratiba, Rio de Janeiro, Brazil. Sampling was carried out monthly from April 2010 to March 2011 along the full extension of seven beaches. A total number of 147 gall morphotypes associated with 70 plant species were found, distributed in 33 plant families, and at least 54 genera. Myrtaceae was the botanical family with the highest richness of gall morphotypes and host species, followed by Bignoniaceae, Fabaceae, Asteraceae, Euphorbiaceae, Sapindaceae, and Malpighiaceae. Most of the gall morphotypes occurred in leaves (78 morphotypes, 38 in stems, 14 in flowers, eight in buds and fruits, and one in adventitious roots. The galling insects belong to the five orders: Diptera, Coleoptera, Hemiptera, Lepidoptera, and Thysanoptera. Cecidomyiidae (Diptera was the most common galling taxon (78 morphotypes, represented by 87 species, being 78 gallers, seven inquilines and two predators. In addition to the gallers, parasitoids, inquilines, and predators were also found.

Variations in the spatial distribution of gall bladder cancer: a call for ...

African Journals Online (AJOL)

Background: The incidence of gall bladder cancers in this part of the world is high and the spatial variation in occurrence of gall bladder cancers can be identified by using geographical information system. Materials and Methods: Data set containing the address information of gall bladder cancer patients from the District of ...

Richness and composition of gall-inducing arthropods at Coiba National Park, Panama

Directory of Open Access Journals (Sweden)

José Luis Nieves-Aldrey

2008-09-01

Full Text Available Interest in studying galls and their arthropods inducers has been growing rapidly in the last two decades. However, the Neotropical region is probably the least studied region for gall-inducing arthropods. A study of the richness and composition of gall-inducing arthropods was carried out at Coiba National Park in the Republic of Panama. Field data come from samples obtained between August 1997 and September 1999, with three (two-week long more intensive samplings. Seventeen sites, representing the main land habitats of Coiba National Park were surveyed. 4942 galls of 50 insect and 9 mite species inducing galls on 50 vascular plants from 30 botanical families were colleted. 62.7% of the galls were induced by gall midges (Diptera, Cecidomyiidae, 15.3% by mites, Eriophyidae, 8.5% by Homoptera, Psyllidae, 6.8% by Coccidae and 5.1% by Phlaeothripidae (Tysanoptera. The host plant families with the most galls were Myrtaceae with seven, Bignoniaceae with five and Euphorbiaceae, Fabaceae and Melastomataceae with four. Leaf galls accounted for about 93% of collected galls. Most leaf galls were pit/blister galls followed by covering and pouch galls. Gall richness per collecting site was between 1 and 19 species. Coiba’s gall diversity is discussed in relation to data available from other tropical sites from continental Panama and the Neotropical region. Our results support the idea that it may be premature to conclude that species richness of gall inducers declines near the equator. Rev. Biol. Trop. 56 (3: 1269-1286. Epub 2008 September 30.El interés por el estudio de las agallas y los artrópodos que las inducen ha crecido en todo el mundo en los últimos veinte años. Sin embargo, los artrópodos que inducen agallas en la región Neotropical son probablemente los menos estudiados. Un estudio de la riqueza y composición de artrópodos que inducen agallas fue desarrollado en el Parque Nacional Coiba en la Republica de Panamá. Los datos provienen de

Meadow-grass gall midge

DEFF Research Database (Denmark)

Hansen, Lars Monrad

The area with meadow-grass (Poa pratensis, L.) grown for seed production in Den-mark is a significant proportion of the entire seed production. The meadow-grass gall midge (Mayetiola schoberi, Barnes 1958) is of considerable economic importance since powerful attacks can reduce the yield...

Carcinoma transverse colon masquerading as carcinoma gall bladder.

Science.gov (United States)

Munghate, Anand; Kumar, Ashwani; Singh, Harnam; Singh, Gurpreet; Singh, Bimaljot; Chauhan, Mahak

2014-04-01

Colorectal cancer is one of the most common cancer worldwide .Its incidence is reported to be increasing in developing countries. It commonly presents with weight loss, anaemia, lump abdomen, change of bowel habit, obstruction or fresh rectal bleeding. Beside these common modes of presentations, there are some rare manifestations which masqueraded as different disease like obstructive jaundice, empyema gall bladder or cholecystitis. A 60-year-old male presented to hospital with right sided pain abdomen. On abdominal examination mild tenderness was present in right hypochondrium. Intra operatively gall bladder was separated from the adjoining gut, peritoneum and liver bed and was removed. On further exploration, there was a large mass in the vicinity of the gall bladder related to transverse colon. Extended right hemicolectomy was done. Histopathological examination of gut mass revealed adenocarcinoma of transverse colon with free margins and gall bladder showed cholecystitis with no evidence of malignancy. We present an interesting case of colon cancer colon that caused diagnostic confusion by mimicking as cholecystitis. Colorectal cancer constitutes a major public health issue globally. Therefore, public awareness, screening of high-risk populations, early diagnosis and effective treatment and follow-up will help to reduce its occurance and further complications.

Tournament ABC analysis of the western Palaearctic population history of an oak gall wasp, Synergus umbraculus.

Science.gov (United States)

Stone, Graham N; White, Sarah C; Csóka, György; Melika, George; Mutun, Serap; Pénzes, Zsolt; Sadeghi, S Ebrahim; Schönrogge, Karsten; Tavakoli, Majid; Nicholls, James A

2017-12-01

Approximate Bayesian computation (ABC) is a powerful and widely used approach in inference of population history. However, the computational effort required to discriminate among alternative historical scenarios often limits the set that is compared to those considered more likely a priori. While often justifiable, this approach will fail to consider unexpected but well-supported population histories. We used a hierarchical tournament approach, in which subsets of scenarios are compared in a first round of ABC analyses and the winners are compared in a second analysis, to reconstruct the population history of an oak gall wasp, Synergus umbraculus (Hymenoptera, Cynipidae) across the Western Palaearctic. We used 4,233 bp of sequence data across seven loci to explore the relationships between four putative Pleistocene refuge populations in Iberia, Italy, the Balkans and Western Asia. We compared support for 148 alternative scenarios in eight pools, each pool comprising all possible rearrangements of four populations over a given topology of relationships, with or without founding of one population by admixture and with or without an unsampled "ghost" population. We found very little support for the directional "out of the east" scenario previously inferred for other gall wasp community members. Instead, the best-supported models identified Iberia as the first-regional population to diverge from the others in the late Pleistocene, followed by divergence between the Balkans and Western Asia, and founding of the Italian population through late Pleistocene admixture from Iberia and the Balkans. We compare these results with what is known for other members of the oak gall community, and consider the strengths and weaknesses of using a tournament approach to explore phylogeographic model space. © 2017 The Authors. Molecular Ecology Published by John Wiley & Sons Ltd.

Host manipulation by the orange leafhopper Cicadulina bipunctata: gall induction on distant leaves by dose-dependent stimulation

Science.gov (United States)

Matsukura, Keiichiro; Matsumura, Masaya; Tokuda, Makoto

2009-09-01

The evolution of the gall-inducing ability in insects and the adaptive significance of the galling habit have been addressed by many studies. Cicadulina bipunctata, the maize orange leafhopper, is an ideal study organism for evaluating these topics because it can be mass-reared and it feeds on model plants such as rice ( Oryza sativa) and maize ( Zea mays). To reveal differences between gall inductions by C. bipunctata and other gall inducers, we conducted four experiments concerning (a) the relationship between the feeding site and gall-induction sites of C. bipunctata on maize, (b) the effects of leafhopper sex and density, (c) the effects of length of infestation on gall induction, and (d) the effects of continuous infestation. C. bipunctata did not induce galls on the leaves where it fed but induced galls on other leaves situated at more distal positions. The degree of gall induction was significantly correlated with infestation density and length. These results indicate that C. bipunctata induces galls in a dose-dependent manner on leaves distant from feeding sites, probably by injecting chemical(s) to the plant during feeding. We suggest that insect galls are induced by a chemical stimulus injected by gall inducers during feeding into the hosts.

Genetic background of resistance to gall mite in Ribes species

Directory of Open Access Journals (Sweden)

Ingrida Mazeikiene

2017-06-01

Full Text Available Resistance to gall mite is an important genetic trait of Ribes. P and Ce genes, responsible for gall mite resistance, were established in Ribes species and interspecific hybrids using molecular markers. Resistance in R. americanum is determined by P gene and in R. sanguineum by Ce gene. Both molecular markers were absent in R. dikuscha genome. Molecular markers related to P and Ce genes were identified in the genome of R. aureum. Resistance to gall mite in the field conditions in R. nigrum x R. americanum, R. nigrum x R. aureum and R. nigrum x R. sanguineum F3 hybrids fitted an expected Mendelian segregation ratio of 1:1, 3:1 and 1:1, respectively. 75.0% of hybrids with a pyramidal resistance to gall mite carrying markers related to Ce and P genes were obtained in the cross combination R. nigrum x R. aureum and will be included in the future breeding programs.

Susceptibility of Some Stone and Pome Fruit Rootstocks to Crown Gall

Directory of Open Access Journals (Sweden)

A. Rhouma

2005-12-01

Full Text Available The susceptibility of different fruit rootstocks to crown gall disease was investigated in greenhouse and field experiments with numerous strains of Agrobacterium tumefaciens over three years. Plants were inoculated in the roots and shoots for pot experiments. Field experiments were performed in a naturally contaminated nursery plot. The genotypes Prunus dulcis and P. persica showed a high level of susceptibility to A. tumefaciens. Among the stone rootstocks, bitter almond was highly susceptible in all experiments. Apricot and Cadaman rootstocks displayed low susceptibility but larger galls, showing that there was no relation between rootstock susceptibility and gall size. Among pome rootstocks, quince BA29 was resistant to the disease, while MM106 was susceptible in potted trials; however, in the field essays, pome rootstocks did not become galled, possibly because the strains had selected for and adapted to stone rootstocks.

Effect of Temperature on Galling Behavior of SS 316, 316 L and 416 Under Self-Mated Condition

Science.gov (United States)

Harsha, A. P.; Limaye, P. K.; Tyagi, Rajnesh; Gupta, Ankit

2016-11-01

Galling behavior of three different stainless steels (SS 316, 316 L and 416) was evaluated at room temperature and 300 °C under a self-mated condition. An indigenously fabricated galling tester was used to evaluate the galling performance of mated materials as per ASTM G196-08 standard. The variation in frictional torque was recorded online during the test to assess the onset of galling. The galling50 (G50) stress value was used to compare the galling resistance of a combination of materials, and the results indicate a significant influence of temperature on the galling resistance of the materials tested. This has been attributed to the decrease in hardness and yield strength at elevated temperature which results in softening of the steel and limits its ability to resist severe deformation. Scanning electron micrographs of the galled surface reflected a severe plastic deformation in sliding direction, and a typical adhesive wear mechanism is prevalent during the galling process.

Synchronism between Aspidosperma macrocarpon Apocynaceae resources allocation and the establishment of the gall inducer Pseudophacopteron sp. Hemiptera: Psylloidea

Directory of Open Access Journals (Sweden)

Ariane C Castro¹

2013-12-01

Full Text Available The joint interpretation of phenology and nutritional metabolism provides important data on plant tissues reactivity and the period of gall induction. A population of Aspidosperma macrocarpon Apocynaceae with leaf galls induced by a Pseudophacopteron sp. Psylloidea was studied in Goiás state, Brazil. Assuming the morphological similarity between host leaves and intralaminar galls, a gradient from non-galled leaves towards galls should be generated, establishing a morpho-physiological continuum. The phenology, infestation of galls, and the carbohydrate and nitrogen contents were monthly evaluated in 10-20 individuals, from September 2009 to September 2010. Our objective was to analyze the nutritional status and the establishment of a physiological continuum between the galls and the non-galled leaves of A. macrocarpon. The period of leaf flushing coincided with the highest levels of nitrogen allocated to the new leaves, and to the lowest levels of carbohydrates. The nutrients were previously consumed by the growing leaves, by the time of gall induction. The levels of carbohydrates were higher in galls than in non-galled leaves in time-based analyses, which indicateed their potential sink functionality. The leaves were infested in October, galls developed along the year, and gall senescence took place from March to September, together with host leaves. This first senescent leaves caused insect mortality. The higher availability of nutrients at the moment of gall induction was demonstrated and seems to be important not only for the establishment of the galling insect but also for the responsiveness of the host plant tissues.

Richness and composition of gall-inducing arthropods at Coiba National Park, Panama

OpenAIRE

Nieves-Aldrey, José Luis; Enrique Medianero, Alicia Ibáñez

2008-01-01

Interest in studying galls and their arthropods inducers has been growing rapidly in the last two decades. However, the Neotropical region is probably the least studied region for gall-inducing arthropods. A study of the richness and composition of gall-inducing arthropods was carried out at Coiba National Park in the Republic of Panama. Field data come from samples obtained between August 1997 and September 1999, with three (two-week long) more intensive samplings. Seventeen sites, represent...

Ecology and evolution of gall-forming insects. Forest Service general technical report

Energy Technology Data Exchange (ETDEWEB)

Price, P.W.; Mattson, W.J.; Baranchikov, Y.N.

1994-09-21

;Partial Contents: Ecology and Population Dynamics; Effects of the Physical Environment on the Ecology of Gall Insects; Biodiversity and Distribution; Genetic Variation in Host Plant Resistance; Evolutionary Perspectives on Gall Insects.

Characterization of the bile and gall bladder microbiota of healthy pigs.

Science.gov (United States)

Jiménez, Esther; Sánchez, Borja; Farina, Annarita; Margolles, Abelardo; Rodríguez, Juan M

2014-12-01

Bile is a biological fluid synthesized in the liver, stored and concentrated in the gall bladder (interdigestive), and released into the duodenum after food intake. The microbial populations of different parts of mammal's gastrointestinal tract (stomach, small and large intestine) have been extensively studied; however, the characterization of bile microbiota had not been tackled until now. We have studied, by culture-dependent techniques and a 16S rRNA gene-based analysis, the microbiota present in the bile, gall bladder mucus, and biopsies of healthy sows. Also, we have identified the most abundant bacterial proteins in the bile samples. Our data show that the gall bladder ecosystem is mainly populated by members of the phyla Proteobacteria, Firmicutes, and Bacteroidetes. Furthermore, fluorescent in situ hybridization (FISH) and transmission electron microscopy (TEM) allowed us to visualize the presence of individual bacteria of different morphological types, in close association with either the epithelium or the erythrocytes, or inside the epithelial cells. Our work has generated new knowledge of bile microbial profiles and functions and might provide the basis for future studies on the relationship between bile microbiota, gut microbiota, and health. © 2014 The Authors. MicrobiologyOpen published by John Wiley & Sons Ltd.

Lithium absorption by the rabbit gall-bladder

DEFF Research Database (Denmark)

Hansen, C P; Holstein-Rathlou, N H; Skøtt, O

1991-01-01

Lithium (Li+) absorption across the low-resistance epithelium of the rabbit gall-bladder was studied in order to elucidate possible routes and mechanisms of Li+ transfer. Li+ at a concentration of 0.4 mM in both mucosal and serosal media did not affect isosmotic mucosa-to-serosa fluid absorption...... was elicited from the mucosal side and was not accounted for by compensatory Li+ absorption; water and Na+ absorption rates decreased nearly in parallel. The effects of 0.4 mM amiloride and of substitution with 20 mM Li+ were only partly additive. It is concluded that Li+ absorption in the rabbit gall...

Standard test method for galling resistance of material couples

CERN Document Server

American Society for Testing and Materials. Philadelphia

2008-01-01

1.1 This test method covers a laboratory test that ranks the galling resistance of material couples using a quantitative measure. Bare metals, alloys, nonmetallic materials, coatings, and surface modified materials may be evaluated by this test method. 1.2 This test method is not designed for evaluating the galling resistance of material couples sliding under lubricated conditions, because galling usually will not occur under lubricated sliding conditions using this test method. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Electronic nose as an innovative tool for the diagnosis of grapevine crown gall

Energy Technology Data Exchange (ETDEWEB)

Blasioli, S., E-mail: sonia.blasioli@unibo.it [Dipartimento di Scienze e Tecnologie Agroambientali, Universita di Bologna, V.le Fanin, 44, 40127 Bologna (Italy); Biondi, E., E-mail: erbiondi@tin.it [Dipartimento di Scienze e Tecnologie Agroambientali, Universita di Bologna, V.le Fanin, 44, 40127 Bologna (Italy); Braschi, I., E-mail: ilaria.braschi@unibo.it [Dipartimento di Scienze e Tecnologie Agroambientali, Universita di Bologna, V.le Fanin, 44, 40127 Bologna (Italy); Mazzucchi, U., E-mail: umberto.mazzucchi@unibo.it [Dipartimento di Scienze e Tecnologie Agroambientali, Universita di Bologna, V.le Fanin, 44, 40127 Bologna (Italy); Bazzi, C., E-mail: carlo.bazzi@unibo.it [Dipartimento di Scienze e Tecnologie Agroambientali, Universita di Bologna, V.le Fanin, 44, 40127 Bologna (Italy); Gessa, C.E., E-mail: carloemanuele.gessa@unibo.it [Dipartimento di Scienze e Tecnologie Agroambientali, Universita di Bologna, V.le Fanin, 44, 40127 Bologna (Italy)

2010-07-05

For the first time, a portable electronic nose was used to discriminate between healthy and galled grapevines, experimentally inoculated with two tumourigenic strains of Agrobacterium vitis. The volatile profile of target cutting samples was analysed by headspace solid phase microextraction coupled with gas chromatography-mass spectrometry. Spectra from tumoured samples revealed the presence of styrene which is compatible with decarboxylation of cinnamic acid involved in secondary metabolism of plants. Principal Component Analysis confirmed the difference in volatile profiles of infected vines and their healthy controls. Linear Discriminant Analysis allowed the correct discrimination between healthy and galled grapevines (83.3%, cross-validation). Although a larger number of samples should be analysed to create a more robust model, our results give novel interesting clues to go further with research on the diagnostic potential of this innovative system associated with multi-dimensional chemometric techniques.

MRI of perforated gall bladder

International Nuclear Information System (INIS)

Sood, B.; Jain, M.; Khandelwal, N.; Singh, P.; Suri, S.

2002-01-01

Gall bladder perforation is a dreaded complication of acute cholecystitis that, if not diagnosed early in the course, might have a poor prognosis. Both CT and ultrasonography have been used until now extensively for the diagnosis of acute cholecystitis, but diagnosis of perforation is always difficult. Magnetic resonance, by its superior soft tissue resolution and multiplanar capability, is a better modality and should fare better than ultrasonography and CT, as demonstrated in our case. Magnetic resonance imaging demonstrates the wall of the gall bladder and defects to a much better advantage and more convincingly. In addition, MR colangiopancreatography images demonstrate the biliary tree better than other modalities. We suggest that in the case of acute cholecystitis, if perforation is suspected and CT and ultrasonography are not conclusive, MR should be the modality of choice. It can be used as a first line of investigation; however, it might not be cost-effective. Copyright (2002) Blackwell Science Pty Ltd

Complex interactions envolving a gall midge Myrciamyia maricaensis Maia (Diptera, Cecidomyiidae, phytophagous modifiers and parasitoids

Directory of Open Access Journals (Sweden)

Fernando Fortunato Faria Ferraz

2003-09-01

Full Text Available Myrciamyia maricaensis Maia, 1995 (Diptera, Cecidomyiidae induces a gall in lateral and apical shoots in the plant Myrcia lundiana Kiaersk (Myrtaceae which is used and modified by two eulophid wasps species. In both cases the gall former species suffer high rate of attack exceeding the importance of parasitoid species as mortality factors. In this study these interactions are described and their effects as mortality of gall former. The intensity of occurrence of the two eulophid species as modifiers and of microhymenopteran parasitoids, and the relative importance of these species as mortality agents of the M. maricaensis larvae is compared. This comparison reveals that two modifiers species found in the gall tissue modification causing the death of the M. maricaensis larva and it is a more important factor of mortality than the cecidomyiid larva parasitism. The fluctuation of the number of each type of gall along the year was monitored in the research field and confirmed in numerical and in synchronic terms of occurrence of the galls; the importance of the species of the gall modifier eulophids, particularly one of these species, as factors of mortality of the M. maricaensis larvae and justified our comparing the relationship between these species and M. maricaensis as similar to the parasitoid-host relationship. The gall shape modification by one of the eulophids allows the occurrence of other inquiline insect species, what means that this gall modification becomes it more heterogeneous and allows the increase of the species richness to the system.

Gall blandder kinetics in diabetics. A hepatobiliary scintigraphy overview

International Nuclear Information System (INIS)

Shelley, S.; Indirani, M.; Gokhale, S.; Anirudhan, N.

2004-01-01

Introduction: Hepatobiliary scintigraphy is underutilized in the evaluation of Gall Bladder(GB) function in diabetics when compared to various other imaging modalities that are currently available.It establishes the function of GB in Diabetes mellitus noninvasively, with a quantified ejection fraction thereby helping to resolve the problem of diabetic cholecystopathy, in the evaluation of visceral neuropathy. Aim: To study Gall Bladder kinetics and emptying in diabetic patients. Materials and methods: One forty eight patients of both sexes in the age group of 30 to 70 were included in the study between 1997 to 1999 in our institution.A 90 minute dynamic post mebrofenin study was acquired. A fatty meal of 600 kcal was given to these patients once the Gall Bladder was visualized.Time activity curves were generated and the Gall Bladder contraction in these patients was evaluated.Patients were classified into 3 groups-Group 1 consists of established Diabetic patients. Group 2 consists of patients with impaired glucose tolerance. Group 3 consists of controls. Observation and result: In Group 1 (n=47) ,28 patients (60%) showed reduced ejection fraction and the mean EF% was 44.12 +/- 16.6. In Group 2 (n=48), 18 patients (38%) showed slightly reduced ejection fraction and the mean EF % was 51.56 +/- 15.67. In Group 3(n=53), 7 patients (13%) showed reduced ejection fraction and the meanEF % was 69.77 +/- 13.59. Test of significance was done using 'Z' test also called normal test in large samples. This study has shown that the average Ejection Fraction (in%) is maximum in normal group and least in diabetic group. Conclusion: Hepatobiliary scintigraphy is helpful in early identification of autonomic dysfunction of Gall Bladder in diabetic patients and in patients with impaired glucose tolerance. (authors)

surgery of the gall-bladder and the commo bile-duct* 1

African Journals Online (AJOL)

The surgical treatment of diseases of the gall-bladder consists largely of the treatment of stones and their complications. There is a voluminous literature on gallstones, but its analysis would serve little purpose in this paper. It is of greater value to analyse one's own experience, to discuss how we can diagnose lesions of.

Morphogenesis of galls induced by Baccharopelma dracunculifoliae (Hemiptera: Psyllidae on Baccharis dracunculifolia (Asteraceae leaves

Directory of Open Access Journals (Sweden)

M. Arduin

Full Text Available The commonest insect gall on Baccharis dracunculifolia (Asteraceae leaves is induced by Baccharopelma dracunculifoliae (Hemiptera, Psyllidae. The gall-inducing insect attacks young leaves in both the unfolded and the fully expanded stages. Four developmental phases were observed in this type of gall: 1 A folding phase, during which the leaf lamina folded upward alongside the midrib and the edges of the upper portion of the leaf approached each other, forming a longitudinal slit. A single chamber was formed on the adaxial surface of the leaf; 2 A swelling phase, in which the folded leaf tissues thickened and the edges of the leaf drew closer together, narrowing the slit. In this phase the gall matured, turning succulent, fusiform and pale green. The single nymphal chamber was lined with white wax and was able to house from one to several nymphs; 3 A dehiscence phase, characterized by the opening of the slit to release inducers; and 4 A senescence phase, when the gall turned dark and dry. The dermal system of the mature gall was composed of a single-layered epidermis. The mesophyll was swollen, and the swelling was due mainly to hyperplasia of the parenchyma. The vascular tissues along the midrib vein were conspicuous and the perivascular fibers resembled parenchymal cells. The hypertrophied secretory cavities contained low lipophylic content. This gall does not form nutritive tissue, but salivary sheaths left by the inducers were observed near the parenchyma, vascular bundles and secretory cavities. This study complements our current knowledge of gall biology and sheds further light on the plasticity of plant tissues stimulated by biotic factors.

Anatomical and phenological implications of the relationship between Schinus polygama (Cav.) (Cabrera) and the galling insect Calophya rubra (Blanchard).

Science.gov (United States)

Guedes, L M; Aguilera, N; Ferreira, B G; Becerra, J; Hernández, V; Isaias, R M S

2018-05-01

The success of galling insects could be determined by synchronisation with host plant phenology and climate conditions, ensuring suitable oviposition sites for gall induction and food resources for their survival. The anatomical, histochemical and phenological synchronisation strategies between Calophya rubra (Blanchard) (Hemiptera: Psylloidea) and its host, the evergreen plant Schinus polygama (Cav.) (Cabrera) (Anacardiaceae), in the Mediterranean climate of southern Chile was evaluated and compared to that of the congeneric C. cf. duvauae (Scott) from Brazil and closely related host plant S. engleri in a subtropical climate. Anatomical, histometric, histochemical and vegetative phenology studies of the stem and galls were conducted from June 2015 to December 2016. Based on the anatomical, histometric and histochemical analysis, the conical stem gall traits imply gains over the non-galled stem toward the galling insect survival, but the maintenance of phellem, secretory ducts and pith indicate conservative developmental traits that cannot be manipulated by C. rubra. Our results indicate that the conditions of the Mediterranean climate zone limit C. rubra immature activity during unfavourable periods, probably determining a diapause period and a univoltine life cycle, which are peculiarities of the S. polygama- C. rubra system. The synchronisation between development and seasonality confers peculiarities to the S. polygama- C. rubra system in the Mediterranean climate zone. © 2018 German Society for Plant Sciences and The Royal Botanical Society of the Netherlands.

Developmental pathway from leaves to galls induced by a sap-feeding insect on Schinus polygamus (Cav.) Cabrera (Anacardiaceae).

Science.gov (United States)

Dias, Graciela G; Ferreira, Bruno G; Moreira, Gilson R P; Isaias, Rosy M S

2013-03-01

Galling sap-feeding insects are presumed to cause only minor changes in host plant tissues, because they usually do not require development of nutritive tissues for their own use. This premise was examined through comparison of the histometry, cytometry and anatomical development of non-galled leaves and galls of Calophya duvauae (Scott) (Hemiptera: Calophyidae) on Schinus polygamus (Cav.) Cabrera (Anacardiaceae). Cell fates changed from non-galled leaves to galls during the course of tissue differentiation. C. duvauae caused changes in dermal, ground, and vascular systems of the leaves of S. polygamus. Its feeding activity induced the homogenization of the parenchyma, and the neoformation of vascular bundles and trichomes. The histometric and cytometric data revealed compensatory effects of hyperplasia and cell hypertrophy in the epidermis, with hyperplasia predominating in the adaxial epidermis. There was a balance between these processes in the other tissues. Thus, we found major differences between the developmental pathways of non-galled leaves and galls. These changes were associated with phenotypic alterations related to shelter and appropriate microenvironmental conditions for the gall inducer. The nondifferentiation of a typical nutritive tissue in this case was compared to other non-phylogenetically related arthropod gall systems, and is suggested to result from convergence associated with the piercing feeding apparatus of the corresponding gall-inducer.

Questioning the environmental stress hypothesis for gall diversity of restinga vegetation on dunes

OpenAIRE

Arriola, Ígor A.; F. MeloJr., JoãoCarlos; S. Isaias, RosyMary

2015-01-01

AbstractThe Atlantic Coast Restinga is a mosaic of plant communities with a distinct floristic and phytophysiognomy, exposed to luminous, thermal, and saline stresses. Plants of the restinga must have special features commonly associated to xeric environments, and are expected to host a high diversity of galling herbivores. We studied gall morphotypes, and recorded the diversity of galls on plants growing in sand dunes in a remnant area of restinga (Acaraí State Park) in São Francisco do Sul,...

New gall midges (Diptera, Cecidomyiidae) associated with Eugenia uniflora and Psidium cattleianum (Myrtaceae)

OpenAIRE

Maia,Valéria C; Nava,Dori E

2011-01-01

Two new species and a new genus of gall midges (Diptera, Cecidomyiidae) are described and illustrated. Both species induce leaf galls on Myrtaceae, the former on Eugenia uniflora and the latter on Psidium cattleianum.

Assemblage of filamentous fungi associated with aculeate hymenopteran brood in reed galls.

Science.gov (United States)

Heneberg, Petr; Bizos, Jiří; Čmoková, Adéla; Kolařík, Miroslav; Astapenková, Alena; Bogusch, Petr

2016-01-01

Monotypic stands of common reed and the reed-gall-associated insect assemblages are distributed worldwide. However, fungi associated with these assemblages have not been characterized in detail. Here we examined 5200 individuals (12 species) of immature aculeate hymenopterans or their parasitoids collected at 34 sampling sites in Central Europe. We noticed fungal outgrowth on exoskeletons of 83 (1.60%) larvae and pupae. The most common host was eudominant Pemphredon fabricii. However, the less abundant aculeate hymenopteran reed gall inquilines were infected at higher prevalence, these included Trypoxylon deceptorium, Trypoxylon minus, Hoplitis leucomelana and Hylaeus moricei (all considered new host records). We identified three fungal species, Penicillium buchwaldii (72% of cases), Aspergillus pseudoglaucus (22%) and Penicillium quebecense (6%). When multibrooded nests were affected, only a part of individuals was infected in 62% of cases. The sampling site-specific infection rate reached up to 13%, thus fungal infections should be considered an important variable driving the abundance of gall inquilines. Infections of generalist host species were more frequent than those of reed gall specialists, suggesting that suboptimal conditions decreased the immunocompetence of non-specialized species, which only occasionally nest in reed galls and feed in reed beds. Copyright © 2015 Elsevier Inc. All rights reserved.

Unexpected high diversity of galling insects in the Amazonian upper canopy: the savanna out there.

Science.gov (United States)

Julião, Genimar R; Venticinque, Eduardo M; Fernandes, G Wilson; Price, Peter W

2014-01-01

A relatively large number of studies reassert the strong relationship between galling insect diversity and extreme hydric and thermal status in some habitats, and an overall pattern of a greater number of galling species in the understory of scleromorphic vegetation. We compared galling insect diversity in the forest canopy and its relationship with tree richness among upland terra firme, várzea, and igapó floodplains in Amazonia, Brazil. The soils of these forest types have highly different hydric and nutritional status. Overall, we examined the upper layer of 1,091 tree crowns. Galling species richness and abundance were higher in terra firme forests compared to várzea and igapó forests. GLM-ANCOVA models revealed that the number of tree species sampled in each forest type was determinant in the gall-forming insect diversity. The ratio between galling insect richness and number of tree species sampled (GIR/TSS ratio) was higher in the terra firme forest and in seasonally flooded igapó, while the várzea presented the lowest GIR/TSS ratio. In this study, we recorded unprecedented values of galling species diversity and abundance per sampling point. The GIR/TSS ratio from várzea was approximately 2.5 times higher than the highest value of this ratio ever reported in the literature. Based on this fact, we ascertained that várzea and igapó floodplain forests (with lower GIA and GIR), together with the speciose terra firme galling community emerge as the gall diversity apex landscape among all biogeographic regions already investigated. Contrary to expectation, our results also support the "harsh environment hypothesis", and unveil the Amazonian upper canopy as similar to Mediterranean vegetation habitats, hygrothermically stressed environments with leaf temperature at lethal limits and high levels of leaf sclerophylly.

Unexpected high diversity of galling insects in the Amazonian upper canopy: the savanna out there.

Directory of Open Access Journals (Sweden)

Genimar R Julião

Full Text Available A relatively large number of studies reassert the strong relationship between galling insect diversity and extreme hydric and thermal status in some habitats, and an overall pattern of a greater number of galling species in the understory of scleromorphic vegetation. We compared galling insect diversity in the forest canopy and its relationship with tree richness among upland terra firme, várzea, and igapó floodplains in Amazonia, Brazil. The soils of these forest types have highly different hydric and nutritional status. Overall, we examined the upper layer of 1,091 tree crowns. Galling species richness and abundance were higher in terra firme forests compared to várzea and igapó forests. GLM-ANCOVA models revealed that the number of tree species sampled in each forest type was determinant in the gall-forming insect diversity. The ratio between galling insect richness and number of tree species sampled (GIR/TSS ratio was higher in the terra firme forest and in seasonally flooded igapó, while the várzea presented the lowest GIR/TSS ratio. In this study, we recorded unprecedented values of galling species diversity and abundance per sampling point. The GIR/TSS ratio from várzea was approximately 2.5 times higher than the highest value of this ratio ever reported in the literature. Based on this fact, we ascertained that várzea and igapó floodplain forests (with lower GIA and GIR, together with the speciose terra firme galling community emerge as the gall diversity apex landscape among all biogeographic regions already investigated. Contrary to expectation, our results also support the "harsh environment hypothesis", and unveil the Amazonian upper canopy as similar to Mediterranean vegetation habitats, hygrothermically stressed environments with leaf temperature at lethal limits and high levels of leaf sclerophylly.

Taxonomic identity of a galling adelgid (Hemiptera: Adelgidae) from three spruce species in central Japan

Science.gov (United States)

Masakazu Sano; Nathan P. Havill; Kenichi. Ozaki

2011-01-01

Gall-forming insects are commonly highly host-specific, and galling species once thought to be oligo- or polyphagous are often found to represent a complex of host-specific races or cryptic species. A recent DNA barcoding study documented that an unidentified species of the genus Adelges is a gall-former associated with four spruce species (...

Host Genetics and Environment Drive Divergent Responses of Two Resource Sharing Gall-Formers on Norway Spruce: A Common Garden Analysis.

Science.gov (United States)

Axelsson, E Petter; Iason, Glenn R; Julkunen-Tiitto, Riitta; Whitham, Thomas G

2015-01-01

A central issue in the field of community genetics is the expectation that trait variation among genotypes play a defining role in structuring associated species and in forming community phenotypes. Quantifying the existence of such community phenotypes in two common garden environments also has important consequences for our understanding of gene-by-environment interactions at the community level. The existence of community phenotypes has not been evaluated in the crowns of boreal forest trees. In this study we address the influence of tree genetics on needle chemistry and genetic x environment interactions on two gall-inducing adelgid aphids (Adelges spp. and Sacchiphantes spp.) that share the same elongating bud/shoot niche. We examine the hypothesis that the canopies of different genotypes of Norway spruce (Picea abies L.) support different community phenotypes. Three patterns emerged. First, the two gallers show clear differences in their response to host genetics and environment. Whereas genetics significantly affected the abundance of Adelges spp. galls, Sacchiphantes spp. was predominately affected by the environment suggesting that the genetic influence is stronger in Adelges spp. Second, the among family variation in genetically controlled resistance was large, i.e. fullsib families differed as much as 10 fold in susceptibility towards Adelges spp. (0.57 to 6.2 galls/branch). Also, the distribution of chemical profiles was continuous, showing both overlap as well as examples of significant differences among fullsib families. Third, despite the predicted effects of host chemistry on galls, principal component analyses using 31 different phenolic substances showed only limited association with galls and a similarity test showed that trees with similar phenolic chemical characteristics, did not host more similar communities of gallers. Nonetheless, the large genetic variation in trait expression and clear differences in how community members respond to host

Host Genetics and Environment Drive Divergent Responses of Two Resource Sharing Gall-Formers on Norway Spruce: A Common Garden Analysis.

Directory of Open Access Journals (Sweden)

E Petter Axelsson

Full Text Available A central issue in the field of community genetics is the expectation that trait variation among genotypes play a defining role in structuring associated species and in forming community phenotypes. Quantifying the existence of such community phenotypes in two common garden environments also has important consequences for our understanding of gene-by-environment interactions at the community level. The existence of community phenotypes has not been evaluated in the crowns of boreal forest trees. In this study we address the influence of tree genetics on needle chemistry and genetic x environment interactions on two gall-inducing adelgid aphids (Adelges spp. and Sacchiphantes spp. that share the same elongating bud/shoot niche. We examine the hypothesis that the canopies of different genotypes of Norway spruce (Picea abies L. support different community phenotypes. Three patterns emerged. First, the two gallers show clear differences in their response to host genetics and environment. Whereas genetics significantly affected the abundance of Adelges spp. galls, Sacchiphantes spp. was predominately affected by the environment suggesting that the genetic influence is stronger in Adelges spp. Second, the among family variation in genetically controlled resistance was large, i.e. fullsib families differed as much as 10 fold in susceptibility towards Adelges spp. (0.57 to 6.2 galls/branch. Also, the distribution of chemical profiles was continuous, showing both overlap as well as examples of significant differences among fullsib families. Third, despite the predicted effects of host chemistry on galls, principal component analyses using 31 different phenolic substances showed only limited association with galls and a similarity test showed that trees with similar phenolic chemical characteristics, did not host more similar communities of gallers. Nonetheless, the large genetic variation in trait expression and clear differences in how community members

Diverse filters to sense: great variability of antennal morphology and sensillar equipment in gall-wasps (Hymenoptera: Cynipidae.

Directory of Open Access Journals (Sweden)

Carlo Polidori

Full Text Available Comparative studies on antennal sensillar equipment in insects are largely lacking, despite their potential to provide insights into both ecological and phylogenetic relationships. Here we present the first comparative study on antennal morphology and sensillar equipment in female Cynipoidea (Hymenoptera, a large and diverse group of wasps, with special reference to the so-called gall-wasps (Cynipidae. A SEM analysis was conducted on 51 species from all extant cynipoid families and all cynipid tribes, and spanning all known life-histories in the superfamily (gall-inducers, gall-inquilines, and non-gall associated parasitoids. The generally filiform, rarely clavate, antennal flagellum of Cynipoidea harbours overall 12 types of sensilla: s. placoidea (SP, two types of s. coeloconica (SCo-A, SCo-B, s. campaniformia (SCa, s. basiconica (SB, five types of s. trichoidea (ST-A, B, C, D, E, large disc sensilla (LDS and large volcano sensilla (LVS. We found a great variability in sensillar equipment both among and within lineages. However, few traits seem to be unique to specific cynipid tribes. Paraulacini are, for example, distinctive in having apical LVS; Pediaspidini are unique in having ≥3 rows of SP, each including 6-8 sensilla per flagellomere, and up to 7 SCo-A in a single flagellomere; Eschatocerini have by far the largest SCo-A. Overall, our data preliminarily suggest a tendency to decreased numbers of SP rows per flagellomere and increased relative size of SCo-A during cynipoid evolution. Furthermore, SCo-A size seems to be higher in species inducing galls in trees than in those inducing galls in herbs. On the other hand, ST seem to be more abundant on the antennae of herb-gallers than wood-gallers. The antennal morphology and sensillar equipment in Cynipoidea are the complex results of different interacting pressures that need further investigations to be clarified.

Primary Lymphoma of the Gall Bladder

African Journals Online (AJOL)

1974-06-29

Jun 29, 1974 ... phomas thus constitute about 10% of all primary sarcomas of the gall ... Department of Pathology, University of Cape Town. J B. C. BOTHA, M.B. CH.B. L. B. KAHN ... mon hepatic duct at its junction with the cystic duct. The.

Size, age and composition: characteristics of plant taxa as diversity predictors of gall-midges (Diptera: Cecidomyiidae

Directory of Open Access Journals (Sweden)

Walter S Araújo

2011-12-01

Full Text Available Many hypotheses have been proposed to explain the diversity of gall-midge insects (Diptera: Cecidomyiidae, some of them taking into account plant diversity. This study aims to test the importance of size, age and composition of host plant taxa in the diversity of Cecidomyiidae. For this we used inventories data on the diversity of galling and host plants in Brazil. We found that Asterales, Myrtales and Malpighiales, were the most important orders, with 34, 33 and 25, gall morphotypes, respectively. The most representative host families were Asteraceae (34 morphotypes, Myrtaceae (23 and Fabaceae (22. In general, the order size and the plant family were good predictors of the galling diversity, but not the taxon age. The most diverse host genera for gall-midges were Mikania, Eugenia and Styrax, with 15, 13 and nine galler species, respectively. The size of plant genera showed no significant relationship with the richness of Cecidomyiidae, contrary to the prediction of the plant taxon size hypothesis. The plant genera with the greatest diversity of galling insects are not necessarily those with the greatest number of species. These results indicate that some plant taxa have a high intrinsic richness of galling insects, suggesting that the plant species composition may be equally or more important for the diversity of gall-midges than the size or age of the host taxon. Rev. Biol. Trop. 59 (4: 1599- 1607. Epub 2011 December 01.

The gall midges (Diptera, Cecidomyiidae from three restingas of Rio de Janeiro State, Brazil

Directory of Open Access Journals (Sweden)

Valéria Cid Maia

2001-06-01

Full Text Available One hundred and eight species of Cecidomyiinae (Cecidomyiidae were found in association with 53 species of plant distributed among 42 genera and 32 families at restingas of Barra de Maricá, Itaipuaçu and Carapebus. Ninety four gall midge species were cecidogenous, four predaceous, five inquilinous of galls and five were free living. Galling species were associated with 47 plant species belonging to 36 genera and 28 families. The majority of the galls occurred on the leaves (N = 63; 13 on buds; nine on inflorescence, closed flower or flower peduncle; three on fruits and one on tendril. Myrtaceae were the richest plant family in number of galls followed by Burseraceae, Nyctaginaceae, Sapotaceae, Erythroxylaceae, Malpighiaceae and Solanaceae. New records of host plants and localities were recorded. Seventy nine Cecidomyiinae species were found at Restinga of Barra de Maricá, 64 at Carapebus and 41 at Itaipuaçu. Sorensen's index revealed that the restingas of Barra de Maricá and Itaipuaçu ate more similar in Cecidomyiinae fauna, confirming a positive relation between geographical proximity and fauna similarity.

Looking for gall bladder disease in the patient's iris.

Science.gov (United States)

Knipschild, P

1988-12-17

In alternative health care iridology is used as a diagnostic aid. The diagnosis of gall bladder disease was used to study its validity and interperformer consistency. The presence of an inflamed gall bladder containing gall stones is said to be easily recognised by certain signs in the lower lateral part of the iris of the right eye. Stereo colour slides were made of the right eye. Stereo colour slides were made of the right eye of 39 patients with this disease and 39 control subjects of the same sex and age. The slides were presented in a random order to five leading iridologists without supplementary information. The prevalence of the disease was estimated at 56%. The median validity was 51% with 54% sensitivity and 52% specificity. These results were close to chance validity (iota = 0.03). None of the iridologists reached a high validity. The median interperformer consistency was 60%. This was only slightly higher than chance consistency (kappa = 0.18). This study showed that iridology is not a useful diagnostic aid.

Diversity of galling insects in Styrax pohlii (Styracaceae): edge effect and use as bioindicators.

Science.gov (United States)

de Araújol, Walter Santos; Julião, Genimar Rebouças; Ribeiro, Bárbara Araújo; Silva, Isadora Portes Abraham; dos Santos, Benedito Baptista

2011-12-01

Impacts of forest fragmentation and edge effect on plant-herbivores interactions are relatively unknown, and the relationships between galling insects and their host plants are very susceptible to environmental variations. The goal of our study was to test the edge effect hypothesis for galling insects associated with Styrax pohlii (Styracaceae) host plant. Samplings were conducted at a fragment of semi-deciduous forest in Goiânia, Goiás, Brazil. Thirty host plant individuals (15 at fragment edge and 15 in its interior) were sampled in July of 2007; in each plant, 10 apical branches were collected at the top, middle and bottom crown levels. Our results supported the prediction of greater richness of gall morphotypes in the edge habitat compared with remnant interior. In a similar way, gall abundance and frequency of attacked leaves were also greater in the fragment edge. These findings consequently suggest a positive response of galling insect diversity to edge effect; in the Saint-Hilaire forest, this effect probably operates through the changes in microclimatic conditions of edge habitats, which results in an increased hygrothermal stress, a determinant factor to distribution patterns of galling insects. We also concluded that these organisms could be employed as biological indicators (i) because of their host-specificity, (ii) they are sensitive to changes in plant quality, and (iii) present dissimilar and specific responses to local variation in habitat conditions.

Carcinoma of Gall bladder with distant metastasis to breast parenchyma. Report of a case and review of literature

International Nuclear Information System (INIS)

Kumaran, D.; Anamalai, M.; Velu, U.; Julka, P.K.; Nambirajan, A.

2016-01-01

Background: Gall bladder carcinoma is one of the most common cancers in India. Gall bladder cancer with metastasis to the breast is very rare. Herein we intend to report a case of carcinoma gall bladder with breast metastasis and a short review of the literature. Methods: This report describes an interesting and unusual case of gall bladder carcinoma presenting with breast metastasis. Case report: A 38-year lady presented with complaints of right abdominal pain. Bilateral breast examination showed 2 2 cm palpable lump in the upper outer quadrant of the left breast. Contrast-enhanced CT of the abdomen and pelvis showed circumferential thickening of gall bladder with the loss of fat plane with the adjacent liver parenchyma. Biopsy from the breast lump was reported as metastatic adenocarcinoma compatible with primary in the gall bladder. Whole body PET-CT showed gall bladder mass with abdominal and pelvic nodes with metastasis to liver, left breast, C7 vertebral body and left supra-clavicular node. She was diagnosed to have disseminated carcinoma gall bladder with liver, breast and supraclavicular nodal metastasis. She received palliative chemotherapy with gemcitabine and carboplatin and radiotherapy to C7 vertebra. After receiving 3 cycles of chemotherapy, chemotherapy was changed to the second line with single agent capecitabine. In spite of two lines of chemotherapy, she succumbed to disease progression and expired. Conclusion: There are limited examples of gall bladder adenocarcinoma with simultaneous metastasis to breast in the English literature. Our case showed an unusual dissemination of gall bladder cancer

Best of failure analysis of turbomachinery components. Highlights from two decades' of laboratory practice; Best of Schadensanalyse an Turbomaschinen. Die Highlights aus 20 Jahren Laborpraxis

Energy Technology Data Exchange (ETDEWEB)

Neidel, Andreas; Cagliyan, Erhan; Gaedicke, Tobias; Giller, Madleine; Hartanto, Vincentius; Kramm, Christine; Riesenbeck, Susanne; Ullrich, Thomas; Wallich, Sebastian; Woehl, Eric [Siemens AG, Power and Gas, Berlin (Germany). Werkstoffprueflabor

2017-01-15

In this contribution, the most interesting and educational failure cases are presented that the author came across during his over twenty years of laboratory practice as manager of the Materials Testing Laboratory of the Berlin Gas Turbine Plant of Siemens' Power and Gas Division. The case studies are presented and categorised in accordance with VDI Guideline 3822, the German failure analyst's guide to the subject of how to organise and run a root cause failure analysis. An effort was made to have each of the main four categories of failure causes represented, namely failures due to mechanical loading, corrosive failures, failures due to thermal loading, and tribological failures. Case studies include turbomachinery components that failed due to tensile overload, stress corrosion cracking, intergranular corrosion, hydrogen embrittlement, hot cracking, fretting, erosion, and galling. Affected components include valves, retaining rings, tubing and piping, burners, rotor disks, lifting lugs, and casings. Some of the presented cases were published in the new section ''Failure Analysis'' of Practical Metallography between October 2011 and the present time. Others were oral presentations at the Metallography conferences and at the annual failure analysis conferences ''VDI Jahrestagung Schadensanalyse'', held during that time. The focus of discussion of the failure cases in this paper is the metallurgical evaluation of failure causes. This is the approach taken in many small and industrial laboratories. A holistic approach of a failure case, which includes calculation and simulation methods such as finite element analysis, and which also implies a knowledge of the service stresses intended by design as well as the actual loading situation of the failed part, is not the aim of this contribution.

Morphological abnormalities in gall-forming aphids in a radiation-contaminated area near Fukushima Daiichi: selective impact of fallout?

Science.gov (United States)

Akimoto, Shin-ichi

2014-01-01

To evaluate the impact of fallout from the Fukushima Daiichi Nuclear Power Plant accident on organisms, this study compared the morphology and viability of gall-forming aphids between the Fukushima population and control populations from noncontaminated areas. This study, in particular, focused on the morphology of first-instar gall formers derived from the first sexual reproduction after the accident. Of 164 first instars from Tetraneura sorini galls collected 32 km from Fukushima Daiichi in spring 2012, 13.2% exhibited morphological abnormalities, including four conspicuously malformed individuals (2.4%). In contrast, in seven control areas, first instars with abnormal morphology accounted for 0.0–5.1% (on average, 3.8%). The proportions of abnormalities and mortality were significantly higher in Fukushima than in the control areas. Similarly, of 134 first instars from T. nigriabdominalis galls, 5.9% exhibited morphological abnormalities, with one highly malformed individual. However, of 543 second-generation larvae produced in T. sorini galls, only 0.37% had abnormalities, suggesting that abnormalities found in the first generation were not inherited by the next generation. Although investigation is limited to one study site, this result suggests that radioactive contamination had deleterious effects on embryogenesis in eggs deposited on the bark surface, but a negligible influence on the second generation produced in closed galls. Furthermore, analysis of both species samples collected in spring 2013 indicated that the viability and healthiness of the aphids were significantly improved compared to those in the 2012 samples. Thus, the results of this study suggest the possibility that a reduced level of radiation and/or selection for radiation tolerance may have led to the improved viability and healthiness of the Fukushima population. PMID:24634721

Sweet Tetra-Trophic Interactions: Multiple Evolution of Nectar Secretion, a Defensive Extended Phenotype in Cynipid Gall Wasps.

Science.gov (United States)

Nicholls, James A; Melika, George; Stone, Graham N

2017-01-01

Many herbivores employ reward-based mutualisms with ants to gain protection from natural enemies. We examine the evolutionary dynamics of a tetra-trophic interaction in which gall wasp herbivores induce their host oaks to produce nectar-secreting galls, which attract ants that provide protection from parasitoids. We show that, consistent with other gall defensive traits, nectar secretion has evolved repeatedly across the oak gall wasp tribe and also within a single genus (Disholcaspis) that includes many nectar-inducing species. Once evolved, nectar secretion is never lost in Disholcaspis, consistent with high defensive value of this trait. We also show that evolution of nectar secretion is correlated with a transition from solitary to aggregated oviposition, resulting in clustered nectar-secreting galls, which produce a resource that ants can more easily monopolize. Such clustering is commonly seen in ant guard mutualisms. We suggest that correlated evolution between maternal oviposition and larval nectar induction traits has enhanced the effectiveness of this gall defense strategy.

Detection of the onset of galling in strip reduction testing using acoustic emission

DEFF Research Database (Denmark)

Moghadam, Marcel; Christiansen, Peter; Bay, Niels Oluf

2017-01-01

Galling is an important issue in metal forming of tribologically severe materials such as high strength steel, stainless steel, Al- or Ti-alloys, since it leads to poor surface quality of the formed components, production stops and possibly deterioration of tools. The onset of galling is difficult...

Carcinoma Gall Bladder: Past, Present, and Future

Directory of Open Access Journals (Sweden)

Ghosh Y

2014-12-01

Full Text Available Carcinoma gall bladder is a very aggressive disease with poor outcomes. Despite achievements in the field of advanced imaging techniques, there is a very high mortality rate of the disease Cancer is the second most common disease in India responsible for maximum mortality with about 0.3 million deaths per year. The magnitude of cancer problem in the Indian Sub-continent (sheer numbers is increasing due to poor to moderate living standards and inadequate medical facilities. Women are more commonly affected than men. The peak incidence occurs in people in their 60s, but the disease age range is from 29 to 90 years of age and there is great geographic and ethnic variation. Carcinoma gall bladder, a disease of old age, is now found in the younger age group and presents with greater ferocity.

Nuclear power plant Generic Aging Lessons Learned (GALL). Appendix B

International Nuclear Information System (INIS)

Kasza, K.E.; Diercks, D.R.; Holland, J.W.; Choi, S.U.

1996-12-01

The purpose of this generic aging lessons learned (GALL) review is to provide a systematic review of plant aging information in order to assess materials and component aging issues related to continued operation and license renewal of operating reactors. Literature on mechanical, structural, and thermal-hydraulic components and systems reviewed consisted of 97 Nuclear Plant Aging Research (NPAR) reports, 23 NRC Generic Letters, 154 Information Notices, 29 Licensee Event Reports (LERs), 4 Bulletins, and 9 Nuclear Management and Resources Council Industry Reports (NUMARC IRs) and literature on electrical components and systems reviewed consisted of 66 NPAR reports, 8 NRC Generic Letters, 111 Information Notices, 53 LERs, 1 Bulletin, and 1 NUMARC IR. More than 550 documents were reviewed. The results of these reviews were systematized using a standardized GALL tabular format and standardized definitions of aging-related degradation mechanisms and effects. The tables are included in volumes 1 and 2 of this report. A computerized data base has also been developed for all review tables and can be used to expedite the search for desired information on structures, components, and relevant aging effects. A survey of the GALL tables reveals that all ongoing significant component aging issues are currently being addressed by the regulatory process. However, the aging of what are termed passive components has been highlighted for continued scrutiny. This report consists of Volume 2, which consists of the GALL literature review tables for the NUMARC Industry Reports reviewed for the report

Franz Joseph Gall and music: the faculty and the bump.

Science.gov (United States)

Eling, Paul; Finger, Stanley; Whitaker, Harry

2015-01-01

The traditional story maintains that Franz Joseph Gall's (1758-1828) scientific program began with his observations of schoolmates with bulging eyes and good verbal memories. But his search to understand human nature, in particular individual differences in capacities, passions, and tendencies, can also be traced to other important observations, one being of a young girl with an exceptional talent for music. Rejecting contemporary notions of cognition, Gall concluded that behavior results from the interaction of a limited set of basic faculties, each with its own processes for perception and memory, each with its own territory in both cerebral or cerebellar cortices. Gall identified 27 faculties, one being the sense of tone relations or music. The description of the latter is identical in both his Anatomie et Physiologie and Sur les Fonctions du Cerveau et sur Celles de Chacune de ses Parties, where he provided positive and negative evidences and discussed findings from humans and lower animals, for the faculty. The localization of the cortical faculty for talented musicians, he explained, is demonstrated by a "bump" on each side of the skull just above the angle of the eye; hence, the lower forehead of musicians is broader or squarer than in other individuals. Additionally, differences between singing and nonsinging birds also correlate with cranial features. Gall even brought age, racial, and national differences into the picture. What he wrote about music reveals much about his science and creative thinking. © 2015 Elsevier B.V. All rights reserved.

Patterns of gall infestation in Heteropterys byrsonimifolia A. Juss. in a forest-savannah ecotone

Directory of Open Access Journals (Sweden)

Marcela de Castro Nunes Santos Terra

Full Text Available ABSTRACT Galls are the result of a specific interaction between an inducer and a host plant. The species Heteropterys byrsonimifolia A. Juss. occurs in abundance in semideciduous seasonal forest ecotones and adjacent open formations. In the ecological reserve Quedas do Rio Bonito, located in the state of Minas Gerais, Brazil, this species is affected by a single gall morphotype. The present study aimed to evaluate whether the structural complexity of the host (test of the structural complexity hypothesis and the distance between hosts (test of the resource concentration hypothesis affect gall density in H. byrsonimifolia and to characterize the spatial distribution of the infestation. The results corroborate the two hypotheses tested, suggesting a metapopulation pattern of gall infestation in H. byrsonimifolia. Gallers were more successful in abrupt forest-savannah transition environments, which may be associated with greater stress-induced host vulnerability that plants usually experience in ecotones.

Primary Lymphoma of the Gall Bladder

African Journals Online (AJOL)

1974-06-29

Jun 29, 1974 ... textbooks of pathology.'" We have been able to find only. 11 cases documented in the world literature; and only 4 of these in the English literature..·• They have appeared as isolated case reports or are mentioned in reviews deal- ing with primary sarcomas of the gall bladder. To the best of our knowledge ...

Quantification of Circulating Free DNA as a Diagnostic Marker in Gall Bladder Cancer.

Science.gov (United States)

Kumari, Swati; Tewari, Shikha; Husain, Nuzhat; Agarwal, Akash; Pandey, Anshuman; Singhal, Ashish; Lohani, Mohtashim

2017-01-01

Gall bladder Carcinoma (GBC) is the fifth most common cancer of the digestive tract and frequently diagnosed in late stage of disease. Estimation of circulating free DNA (cfDNA) in serum has been applied as a "liquid biopsy" in several deep seated malignancies. Its value in diagnosis of gall bladder carcinoma has not been studied. The present study was designed to assess the role of cfDNA in the diagnosis of GBC and correlate levels with the TNM stage. Serum was collected from 34 patients with GBC and 39 age and sex matched controls including 22 cholecystitis and 17 healthy individuals. Serum cfDNA levels were measured through quantitative polymerase chain reaction (qPCR) by amplification of β-globin gene. Performance of the assay was calculated through the receiver operating characteristic (ROC) curve. The cfDNA level was significantly lower in healthy controls and cholecystitis (89.32 ± 59.76 ng/ml, 174.21 ± 99.93 ng/ml) compared to GBC (1245.91 ± 892.46 ng/ml, p = <0.001). The cfDNA level was significantly associated with TNM stage, lymph node involvement and jaundice (0.002, 0.027, and 0.041, respectively). Area under curve of ROC analysis for cancer group versus healthy and cholecystitis group was 1.00 and 0.983 with sensitivity of 100 %, 88.24 % and specificity of 100 % respectively. Quantitative analysis of cfDNA may distinguish cholecystitis and gall bladder carcinoma and may serve as new diagnostic, noninvasive marker adjunct to imaging for the diagnosis of GBC.

Moving your sons to safety: galls containing male fig wasps expand into the centre of figs, away from enemies.

Directory of Open Access Journals (Sweden)

Hui Yu

Full Text Available Figs are the inflorescences of fig trees (Ficus spp., Moraceae. They are shaped like a hollow ball, lined on their inner surface by numerous tiny female flowers. Pollination is carried out by host-specific fig wasps (Agaonidae. Female pollinators enter the figs through a narrow entrance gate and once inside can walk around on a platform generated by the stigmas of the flowers. They lay their eggs into the ovules, via the stigmas and styles, and also gall the flowers, causing the ovules to expand and their pedicels to elongate. A single pollinator larva develops in each galled ovule. Numerous species of non-pollinating fig wasps (NPFW, belonging to other families of Chalcidoidea also make use of galled ovules in the figs. Some initiate galls, others make use of pollinator-generated galls, killing pollinator larvae. Most NPFW oviposit from the outside of figs, making peripherally-located pollinator larvae more prone to attack. Style length variation is high among monoecious Ficus spp. and pollinators mainly oviposit into more centrally-located ovules, with shorter styles. Style length variation is lower in male (wasp-producing figs of dioecious Ficus spp., making ovules equally vulnerable to attack by NPFW at the time that pollinators oviposit. We recorded the spatial distributions of galled ovules in mature male figs of the dioecious Ficus hirta in Southern China. The galls contained pollinators and three NPFW that kill them. Pollinators were concentrated in galls located towards the centre of the figs, NPFW towards the periphery. Due to greater pedicel elongation by male galls, male pollinators became located in more central galls than their females, and so were less likely to be attacked. This helps ensure that sufficient males survive, despite strongly female-biased sex ratios, and may be a consequence of the pollinator females laying mostly male eggs at the start of oviposition sequences.

Renaissance der KMU in einer globalisierten Wirtschaft : Beiträge zu den Rencontres de St-Gall 1998

OpenAIRE

1998-01-01

Rückblick auf 50 Jahre Rencontres de St-Gall / Review of 50 years Rencontres de St-Gall Karl-Heinz Schmidt Leistungsdifferenzierung als Gegenstand internationaler Forschungskooperation - 50 Jahre Rencontres de St-Gall 17 Thema A: Deregulierung und Branchenentwicklung in der Dienstleistungsgesellschaft / Topic A: Deregulation and the prospects of sectors in the service society Leo W. Chini Die betriebswirtschaftlichen Effekte der von der EU induzierten »Deregulier...

Pancreatic heterotopia in the gall bladder: a case report and literature review

Directory of Open Access Journals (Sweden)

Sansom Henrique Bromberg

2009-03-01

Full Text Available Pancreatic heterotopia in the gall bladder is a rare entity, with approximately 31 cases reported in English language literature until 2006; there are no Brazilian studies on the topic. As it is usually asymptomatic, the definitive diagnosis is made by the anatomopathological material excised due to common diseases of the organ, such as lithiasis, inflammatory processes, polyps and tumors. A case is reported of a 40-year-old female patient submitted to surgery with a diagnosis of lithiasic cholecystopathy. Ectopy was evidenced by the histological study, due to the presence of acinar and ductal components of the pancreas and gall bladder corpus. The authors used their own pathological classification for this ectopy, and recommended that this entity be included more frequently in the differential diagnosis of alithiasic cholecystopathy and intramural and exophytic lesions of the gall bladder.

Distributional record of oak gall wasp (Hymenoptera: Cynipidae ...

African Journals Online (AJOL)

m

2011-11-16

Nov 16, 2011 ... following formula: ... Sørensen similarity index is calculated from this formula as: ..... Bayesian phylogenetics and the evolution of gall ... theory. Ecology, 89(7): 1921-1930. Stone GN, Schonrogge K, Atkinson R, Bellido D, ...

Lithium absorption by the rabbit gall-bladder

DEFF Research Database (Denmark)

Hansen, C P; Holstein-Rathlou, N H; Skøtt, O

1991-01-01

Lithium (Li+) absorption across the low-resistance epithelium of the rabbit gall-bladder was studied in order to elucidate possible routes and mechanisms of Li+ transfer. Li+ at a concentration of 0.4 mM in both mucosal and serosal media did not affect isosmotic mucosa-to-serosa fluid absorption...

Quantification of Galling in Sheet Metal Forming by surface topography characterisation

DEFF Research Database (Denmark)

Andreasen, Jan Lasson; Bay, Niels; De Chiffre, Leonardo

1998-01-01

One of the major problems in forming of stainless steel sheet is galling due to lubricant film breakdown leading to scoring and bad surface quality. In a Danish research programme new lubricants substituting the normally applied chlorinated paraffin oils are being developed and tested...... for this purpose. In order to determine the limits of lubrication of these new lubricants, as well as commercial ones already available on the market, two sheet forming tests have been developed. Quantification of the degree of galling is done by roughness measurements on the workpiece surface. In a strip...

Efficacy of the Non-Pathogenic Agrobacterium Strains K84 and K1026 against Crown Gall in Tunisia

Directory of Open Access Journals (Sweden)

A. Rhouma

2004-08-01

Full Text Available The non-pathogenic Agrobacterium radiobacter strain K84 and its genetically modified (GEM strain K1026 were tested for their effectiveness against local Tunisian strains and two reference strains (C58 and B6 of the crown gall bacterium Agrobacterium tumefaciens. Tests in planta were carried out on herbaceous plants (tomato and tagetes and on some sensitive rootstocks (bitter almond, peach almond hybrid GF677 and quince BA29. In vitro tests showed that both K84 and K1026 were effective and that the difference between these strains was not statistically significant. On tomato and tagetes, strain K84 was effective against all crown gall isolates with the exception of the A. tumefaciens reference strain B6. GEM strain K1026 was very effective against all isolates from Tunisia and against the reference strains. Both antagonistic strains significantly reduced the percentage of galled plants as well as the number of galls per plant. Under field conditions, both antagonists controlled crown gall effectively. Best results were obtained on the bitter almond-tree rootstock. Antagonist effectiveness was less evident on quince BA29 and peach almond GF677 rootstocks. The genetically modified strain K1026 is of interest in controlling crown gall disease in Tunisia.

Seasonal variation of phenolic content in galled and non-galled tissues of Calliandra brevipes Benth (Fabaceae: Mimosoidae Variação sazonal do conteúdo fenólico em tecidos galhados e não-galhados de Calliandra brevipes Benth (Fabaceae: Mimosoidae

Directory of Open Access Journals (Sweden)

Michelle de Lima Detoni

2011-09-01

Full Text Available Two species, Tanaostigmodes ringueleti and T. mecanga, induce distinct galls on Calliandra brevipes Benth (Fabaceae: Mimosoidae, a globose and a fusiform gall morphotype. Seasonal changes of phenolic content in the tissues of the two distinct galls were compared to those of non-galled leaves and stems of the host plants over one year. The variation in the phenolic content profiles was similar in both non-galled and galled tissues, and was primarily associated with changes in the levels of rainfall, indicating a direct response to hydric stress. In periods of drastic changes in water precipitation, the alterations were significantly higher in non-galled than in galled tissues suggesting that the gall inducers might limit the variation in the phenolic concentration for their own benefit.Duas espécies, Tanaostigmodes ringueleti e T. mecanga, induzem galhas distintas em Calliandra brevipes Benth (Fabaceae: Mimosoidae, um morfotipo globoso e um fusiforme. Mudanças sazonais no conteúdo fenólico nos tecidos das duas galhas foram comparadas àquelas de folha e caule não galhados das plantas hospedeiras por um ano. A variação no perfil de conteúdo fenólico foi similar em tecidos galhados e não galhados, sendo associada primariamente às mudanças nos níveis de chuva, constituindo uma resposta direta ao estresse hídrico. Nos períodos de mudanças drásticas na precipitação de água, as alterações foram significativamente maiores em tecido não galhados do que em tecidos galhados, sugerindo que os galhadores estariam limitando a variação do conteúdo fenólico em seu próprio benefício.

Moessbauer spectrometry applied to the study of laboratory samples made of iron gall ink

International Nuclear Information System (INIS)

Burgaud, C.; Rouchon, V.; Refait, P.; Wattiaux, A.

2008-01-01

Iron gall inks consist of a mixture of vitriol, gall nut extracts and gum arabic. The association of the iron(II) sulphate present in vitriols, and the carboxyphenolic acids present in gall nut extracts leads to the formation of dark coloured iron-based precipitates. In order to evaluate the percentage of iron used in the formation of these precipitates, transmission Moessbauer spectroscopy (MS) measurements were performed on laboratory made inks at room temperature. These were completed by X-ray diffraction (XRD), and Raman spectroscopy measurements. The samples consisted of several solutions of iron(II) sulphate, gallic acid and gum arabic. After evaporation, the residues were analysed. Up to eight different Moessbauer signatures were detected, most of them correlated to iron sulphates. The Moessbauer signature of the iron gall precipitate was also isolated. It is not distinctly defined and may overlap with the signatures of iron(III) hydroxy-sulphates, such as jarosite or copiapite. Raman spectrometry then proved to be a useful complementary technique for the identification of the precipitate. (orig.)

A NEW SPECIES OF INVASIVE GALL WASP (HYMENOPTERA: EULOPHIDAE: TETRASTICHINAE) ON BLUE GUM (EUCALYPTUS GLOBULUS) IN CALIFORNIA

Science.gov (United States)

The blue gum gall wasp, Selitrichodes globulus La Salle & Gates (Hymenoptera: Eulophidae: Tetrastichinae), is described as an invasive gall inducer on blue gum, Eucalyptus globulus (Myrtaceae), in California....

Influence of surface texture on the galling characteristics of lean duplex and austenitic stainless steels

DEFF Research Database (Denmark)

Wadman, Boel; Eriksen, J.; Olsson, M.

2010-01-01

Two simulative test methods were used to study galling in sheet forming of two types of stainless steel sheet: austenitic (EN 1.4301) and lean duplex LDX 2101 (EN 1.4162) in different surface conditions. The pin-on-disc test was used to analyse the galling resistance of different combinations of ...

New gall midges (Diptera, Cecidomyiidae) associated with Eugenia uniflora and Psidium cattleianum (Myrtaceae)

OpenAIRE

Maia, Valéria C; Nava, Dori E

2011-01-01

Two new species and a new genus of gall midges (Diptera, Cecidomyiidae) are described and illustrated. Both species induce leaf galls on Myrtaceae, the former on Eugenia uniflora and the latter on Psidium cattleianum. Duas novas espécies e um novo gênero de insetos galhadores (Diptera, Cecidomyiidae) são descritos e ilustrados. Ambas espécies induzem galhas foliares em Myrtaceae, a primeira em Eugenia uniflora e a segunda em Psidium cattleianum.

Plant responses to Agrobacterium tumefaciens and crown gall development

Science.gov (United States)

Gohlke, Jochen; Deeken, Rosalia

2014-01-01

Agrobacterium tumefaciens causes crown gall disease on various plant species by introducing its T-DNA into the genome. Therefore, Agrobacterium has been extensively studied both as a pathogen and an important biotechnological tool. The infection process involves the transfer of T-DNA and virulence proteins into the plant cell. At that time the gene expression patterns of host plants differ depending on the Agrobacterium strain, plant species and cell-type used. Later on, integration of the T-DNA into the plant host genome, expression of the encoded oncogenes, and increase in phytohormone levels induce a fundamental reprogramming of the transformed cells. This results in their proliferation and finally formation of plant tumors. The process of reprogramming is accompanied by altered gene expression, morphology and metabolism. In addition to changes in the transcriptome and metabolome, further genome-wide (“omic”) approaches have recently deepened our understanding of the genetic and epigenetic basis of crown gall tumor formation. This review summarizes the current knowledge about plant responses in the course of tumor development. Special emphasis is placed on the connection between epigenetic, transcriptomic, metabolomic, and morphological changes in the developing tumor. These changes not only result in abnormally proliferating host cells with a heterotrophic and transport-dependent metabolism, but also cause differentiation and serve as mechanisms to balance pathogen defense and adapt to abiotic stress conditions, thereby allowing the coexistence of the crown gall and host plant. PMID:24795740

Life history of the gall-maker Eugeniamyia dispar Maia, Mendonça-Jr. & Romanowski, 1996 (Diptera, Cecidomyiidae

Directory of Open Access Journals (Sweden)

M. de S.,Jr. MENDONÇA

Full Text Available The development of the galls of the midge Eugeniamyia dispar Maia, Mendonça-Jr. & Romanowski, 1996 (Diptera: Cecidomyiidae was monitored weekly on its host plant, Eugenia uniflora (Myrtaceae. The work was carried out in the urban area of Porto Alegre, RS, Brazil, from October 1993 to September 1995. Galls were collected from the field and raised in the laboratory to obtain adults. The females oviposit on young leaves of the host plant, with the first instar larvae inducing the gall, which is unilocular. The last instar larvae drop to the soil to pupate and later emerge as adults. The galls occur from late August to early June, when young leaves of the host can be found, with populations peaking during the summer. So far this species is only known from the two southernmost states of Brazil (RS and SC.

Life history of the gall-maker Eugeniamyia dispar Maia, Mendonça-Jr. & Romanowski, 1996 (Diptera, Cecidomyiidae).

Science.gov (United States)

Mendonça, M de S; Romanowski, H P

2002-05-01

The development of the galls of the midge Eugeniamyia dispar Maia, Mendonça-Jr. & Romanowski, 1996 (Diptera: Cecidomyiidae) was monitored weekly on its host plant, Eugenia uniflora (Myrtaceae). The work was carried out in the urban area of Porto Alegre, RS, Brazil, from October 1993 to September 1995. Galls were collected from the field and raised in the laboratory to obtain adults. The females oviposit on young leaves of the host plant, with the first instar larvae inducing the gall, which is unilocular. The last instar larvae drop to the soil to pupate and later emerge as adults. The galls occur from late August to early June, when young leaves of the host can be found, with populations peaking during the summer. So far this species is only known from the two southernmost states of Brazil (RS and SC).

Penicillium cecidicola, a new species on cynipid insect galls on Quercus pacifica in the western United States

DEFF Research Database (Denmark)

Seifert, K.A.; Hoekstra, E.H.; Frisvad, Jens Christian

2004-01-01

A synnematous species of Penicillium subgenus Biverticillium was found inside emergence tunnels from insect galls (Cynipidae, Hymenoptera, the so-called gall wasps) on scrub oaks (Quercus pacifica Nixon & C.H. Muller) collected in the western United States. The fungus produces synnemata with white...... isolates exposed to light after 10 days. The fungus produces the extrolite apiculide A and a series of unidentified extrolites also produced by P. panamense. The oak gall species is described here as Penicillium cecidicola and compared with similar species. An ITS phylogeny suggests that P. cecidicola...

The gall mites Vasates quadripedes and Cecidophyopsis psilaspis (Acari: Eriophyidae) new to Denmark

DEFF Research Database (Denmark)

Bruun, Hans Henrik; Soika, Grazyna

2013-01-01

We report the first records from Denmark of the gall mite species Vasates quadripedes Shimer, 1869 and Cecidophyopsis psilaspis (Nalepa, 1893). V quadripedes is native to North America and forms pouch galls on leaves of some American species of maple. In Europe, it has been found on planted silver...... maple, Acer saccharinum L., only. The species has spread across Europe in recent years. C. psilaspis forms bud galls of species of Taxus in Europe only the native Taxus baccata L. The species is native to Europe and has been introduced to North America....

Comunidades de insetos galhadores (Insecta em diferentes fisionomias do cerrado em Minas Gerais, Brasil Galling insect (Insecta communities in different "cerrado" physiognomies in Minas Gerais, Brazil

Directory of Open Access Journals (Sweden)

Silmary J. Gonçalves-Alvim

2001-07-01

Full Text Available Studies on the communities of galling insects and their host plants were performed in three "cerrado" physiognomies that occur in Minas Gerais: "campo sujo", "cerrado" sensu strictu, and "cerradão". Galls and host plants were collected along transects in a total of 3,000 herbs, 300 shrubs and 135 trees in each physiognomy. Ninety two species of galling insects (morphotypes on 62 host plant species of 28 families were found. The highest galling insect richness was observed in the "cerrado". Approximately 75.0% of galling insects belonged to the Cecidomyiidae (Diptera. The highest gall frequency was found on leaves (58.70% of the host plants, and was glabrous (83.70%. Most gall shape were elliptic (30.43%. A low similarity in galling insect species was observed among the three sampled physiognomies - the highest similarity index was observed between "cerrado" and "campo sujo" (SΦrensen index = 0.20, indicating that the presence of rare species of galling insects might be common in these environments.

Evidence for a stress hypothesis: hemiparasitism effect on the colonization of Alchornea castaneaefolia A. Juss.uphorbiaceae) by Galling Insects

OpenAIRE

SCHWARTZ, Gustavo; HANAZAKI, Natalia; SILVA, Marivana B.; IZZO, Thiago J.; BEJAR, María E. P.; MESQUITA, Mariana R.; FERNANDES, G. Wilson

2003-01-01

Stressed plants are generally more attacked by galling insects. In this study we investigated the relationship between population abundance and species richness of galling insects on the tree Alchornea castaneaefolia A. JUSS. (Euphorbiaceae), submited to stress induced by the hemiparasite Psittacanthus sp. (Loranthaceae) in the Amazon, Brazil. Branches of A. castaneaefolia attacked by the hemiparasite were more heavily infested by galling insects than non-attacked branches. The field observat...

Gall midges (Diptera: Cecidomyiidae) new to the Danish fauna

DEFF Research Database (Denmark)

Haarder, Simon; Bruun, Hans Henrik; Harris, Keith M.

2016-01-01

First records of twenty-three gall midge species in Denmark are reported: Asphondylia ervi Rübsaamen, Contarinia acetosellae Rübsaamen, C. viburnorum Kieffer, Dasineura astragalorum (Kieffer), D. fructum (Rübsaamen), D. harrisoni (Bagnall), D. lotharingiae (Kieffer), D. papaveris (Winnertz), D...

Efficacy of Eucalyptus cinerea as a Source of Bioactive Compounds for Curative Biocontrol of Crown Gall Caused by Agrobacterium tumefaciens Strain B6

Directory of Open Access Journals (Sweden)

Yosra Kahla

2017-01-01

Full Text Available This research investigated the Eucalyptus cinerea leaves efficiency in the Agrobacterium tumefaciens biocontrol, the causative agent of crown gall. GC-MS analysis of the essential oil (EO showed that the main components were 1,8-cineole (61% and camphene (15.13%. Thanks to its polyphenols, flavonoids, quinones, terpenoids, alkaloids, and tannins richness, the EtOAc-F exhibited the most potent antibacterial activity in vitro. Indeed, compared to the other fractions, it has the lowest MIC and MBC values of 0.312 mg/mL and 2.5 mg/mL, respectively. The GC-MS analysis of EtOAc-F confirmed its richness in antibacterial compounds including gallic acid (7.18%, shikimic acid (5.07%, and catechin (3.12%. The time-kill curve assay of EtOAc-F (2.5 mg/mL showed a potent bactericidal effect after 20 min of direct contact with A. tumefaciens. In planta experiments, gall weights were significantly reduced when EtOAc-F was applied at 0.625 and 2.5 mg/wounds. Besides, the disease reduction rates in gall weight were 95% and 97.5%, respectively. Interestingly, no phytotoxic effect was observed since tomato seeds germinated in the presence of the different concentrations of EtOAc-F. These results suggest that EtOAc-F has a good potential to be a curative biocontrol agent for crown gall disease.

Prevalence of gall bladder stones among type 2 diabetic patients in Benghazi Libya: a case-control study

Directory of Open Access Journals (Sweden)

Behieh A

2009-01-01

Full Text Available Background: Diabetes mellitus and gall bladder stones are both common and costly diseases.Increasing age, female gender, overweight, familial history of the disease and type 2 diabetes mellitusis all associated with an increased risk of gallstones. Several studies from around the world reportedan increased prevalence of gall bladder stones in patients with diabetes mellitus. Aims andobjectives: The aim of this study was to define the frequency of gall bladder stones among Libyandiabetics and to evaluate the possible associated risk factors in these patients. Patients andmethods: A case-control study was performed during 2007 at Benghazi Diabetes and endocrinologyCenter. The study involved 161 randomly selected type-2 diabetic patients under regular follow up atthe center, and 166 age and sex matched non-diabetic outpatients at the 7th of October teachinghospital. Real-time abdominal ultrasound was performed by two radiologists to examine the abdomenafter an overnight fast. Results: About 40% of the diabetic cohort had gall bladder stones ascompared to 17.5% of non-diabetic patients. Females were significantly more affected than males.Patients with gall bladder stones were significantly older and had a significantly higher body massindex than those without stones. Conclusion: The prevalence of gallstones in Libyan diabeticpatients is higher than the rates reported in other parts of the world. Libyan diabetic patients withgallstones tend to be older and more obese than those without gallstones. Duration of diabetesmellitus and type of treatment does not seem to influence the frequency of gall bladder stones amongLibyan diabetics.

Failure analysis: Status and future trends

International Nuclear Information System (INIS)

Anderson, R.E.; Soden, J.M.; Henderson, C.L.

1995-01-01

Failure analysis is a critical element in the integrated circuit manufacturing industry. This paper reviews the changing role of failure analysis and describes major techniques employed in the industry today. Several advanced failure analysis techniques that meet the challenges imposed by advancements in integrated circuit technology are described and their applications are discussed. Future trends in failure analysis needed to keep pace with the continuing advancements in integrated circuit technology are anticipated

Computerized tomography of gall bladder cancer

International Nuclear Information System (INIS)

Todua, F.I.; Karmazanovskij, G.G.

1989-01-01

The authors have summed up the experience in the use of computerized tomography (CT) in diagnosis of gall bladder cancer. The investigation of 17 patients with cancer of this site showed a high informative value of the method. A retrospective comparative study of the results of CT and surgical interventions was carried out. It has been concluded that CT makes it possible not only to diagnose malignant lesions of the bile ducts but also to assess a possible scope of a forthcoming operation

Nuclear power plant Generic Aging Lessons Learned (GALL). Main report and appendix A

Energy Technology Data Exchange (ETDEWEB)

Kaza, K.E.; Diercks, D.R.; Holland, J.W.; Choi, S.U. [and others

1996-12-01

The purpose of this generic aging lessons learned (GALL) review is to provide a systematic review of plant aging information in order to assess materials and component aging issues related to continued operation and license renewal of operating reactors. Literature on mechanical, structural, and thermal-hydraulic components and systems reviewed consisted of 97 Nuclear Plant Aging Research (NPAR) reports, 23 NRC Generic Letters, 154 Information Notices, 29 Licensee Event Reports (LERs), 4 Bulletins, and 9 Nuclear Management and Resources Council Industry Reports (NUMARC IRs) and literature on electrical components and systems reviewed consisted of 66 NPAR reports, 8 NRC Generic Letters, 111 Information Notices, 53 LERs, 1 Bulletin, and 1 NUMARC IR. More than 550 documents were reviewed. The results of these reviews were systematized using a standardized GALL tabular format and standardized definitions of aging-related degradation mechanisms and effects. The tables are included in volume s 1 and 2 of this report. A computerized data base has also been developed for all review tables and can be used to expedite the search for desired information on structures, components, and relevant aging effects. A survey of the GALL tables reveals that all ongoing significant component aging issues are currently being addressed by the regulatory process. However, the aging of what are termed passive components has been highlighted for continued scrutiny. This document is Volume 1, consisting of the executive summary, summary and observations, and an appendix listing the GALL literature review tables.

Nuclear power plant Generic Aging Lessons Learned (GALL). Main report and appendix A

International Nuclear Information System (INIS)

Kasza, K.E.; Diercks, D.R.; Holland, J.W.; Choi, S.U.

1996-12-01

The purpose of this generic aging lessons learned (GALL) review is to provide a systematic review of plant aging information in order to assess materials and component aging issues related to continued operation and license renewal of operating reactors. Literature on mechanical, structural, and thermal-hydraulic components and systems reviewed consisted of 97 Nuclear Plant Aging Research (NPAR) reports, 23 NRC Generic Letters, 154 Information Notices, 29 Licensee Event Reports (LERs), 4 Bulletins, and 9 Nuclear Management and Resources Council Industry Reports (NUMARC IRs) and literature on electrical components and systems reviewed consisted of 66 NPAR reports, 8 NRC Generic Letters, 111 Information Notices, 53 LERs, 1 Bulletin, and 1 NUMARC IR. More than 550 documents were reviewed. The results of these reviews were systematized using a standardized GALL tabular format and standardized definitions of aging-related degradation mechanisms and effects. The tables are included in volumes 1 and 2 of this report. A computerized data base has also been developed for all review tables and can be used to expedite the search for desired information on structures, components, and relevant aging effects. A survey of the GALL tables reveals that all ongoing significant component aging issues are currently being addressed by the regulatory process. However, the aging of what are termed passive components has been highlighted for continued scrutiny. This document is Volume 1, consisting of the executive summary, summary and observations, and an appendix listing the GALL literature review tables

Galled by the Gallbladder?: Your Tiny, Hard-Working Digestive Organ

Science.gov (United States)

... Galled by the Gallbladder? Your Tiny, Hard-Working Digestive Organ En español Send us your comments Most ... among the most common and costly of all digestive system diseases. By some estimates, up to 20 ...

Shifts in Plant Assemblages Reduce the Richness of Galling Insects Across Edge-Affected Habitats in the Atlantic Forest.

Science.gov (United States)

Souza, Danielle G; Santos, Jean C; Oliveira, Marcondes A; Tabarelli, Marcelo

2016-10-01

Impacts of habitat loss and fragmentation on specialist herbivores have been rarely addressed. Here we examine the structure of plant and galling insect assemblages in a fragmented landscape of the Atlantic forest to verify a potential impoverishment of these assemblages mediated by edge effects. Saplings and galling insects were recorded once within a 0.1-ha area at habitat level, covering forest interior stands, forest edges, and small fragments. A total of 1,769 saplings from 219 tree species were recorded across all three habitats, with differences in terms of sapling abundance and species richness. Additionally, edge-affected habitats exhibited reduced richness of both host-plant and galling insects at plot and habitat spatial scale. Attack levels also differed among forest types at habitat spatial scale (21.1% of attacked stems in forest interior, 12.4% in small fragments but only 8.5% in forest edges). Plot ordination resulted in three clearly segregated clusters: one formed by forest interior, one by small fragments, and another formed by edge plots. Finally, the indicator species analysis identified seven and one indicator plant species in forest interior and edge-affected habitats, respectively. Consequently, edge effects lead to formation of distinct taxonomic groups and also an impoverished assemblage of plants and galling insects at multiple spatial scales. The results of the present study indicate that fragmentation-related changes in plant assemblages can have a cascade effects on specialist herbivores. Accordingly, hyperfragmented landscapes may not be able to retain an expressive portion of tropical biodiversity. © The Authors 2016. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Non-destructive study of iron gall inks in manuscripts

Science.gov (United States)

Duh, Jelena; Krstić, Dragica; Desnica, Vladan; Fazinić, Stjepko

2018-02-01

The aim of this research is to establish an effective procedure of iron gall ink characterization using complementary non-destructive methods. By this, it is possible to better understand correlation of chemical composition of the inks and the state of preservation of iron gall ink manuscripts, as well as the effects of conservation treatment performed upon them. This study was undertaken on a bound 16th century manuscript comprised of different types of paper and ink from the National and University Library in Zagreb. Analytical methods used included Particle Induced X-ray Emission (PIXE) and X-ray Fluorescence (XRF). Paper fibers were identified by optical microscopy and the degradation state, as well as ink differentiation, transit metal migrations and detection of stains, with ultraviolet (UV) and infrared (IR) photography. The techniques applied on original writing materials gave important information about paper and ink composition, its preservation state and efficiency of conservation treatment performed upon them.

Electrical failure analysis for root-cause determination

International Nuclear Information System (INIS)

Riddle, J.

1990-01-01

This paper outlines a practical failure analysis sequence. Several technical definitions are required. A failure is defined as a component that was operating in a system where the system malfunctioned and the replacement of the device restored system functionality. The failure mode is the malfunctioning behavior of the device. The failure mechanism is the underlying cause or source of the failure mode. The failure mechanism is the root cause of the failure mode. The failure analysis procedure needs to be adequately refined to result in the determination of the cause of failure to the degree that corrective action or design changes will prevent recurrence of the failure mode or mechanism. An example of a root-cause determination analysis performed for a nuclear power industry customer serves to illustrate the analysis methodology

Pharmacognostic studies of insect gall of Quercus infectoria Olivier (Fagaceae)

Institute of Scientific and Technical Information of China (English)

Savitri Shrestha; Vasuki Srinivas Kaushik; Ravi Shankara Birur Eshwarappa; Sundara Rajan Subaramaihha; Latha Muuaiah Ramanna; Dhananjaya Bhadrapura Lakkappa

2014-01-01

Objective:To study the detailed pharmacognostic profile of galls of Quercus infectoria Olivier (Q. infectoria olivier) (Fagaceae), an important medicinal plant used in the Indian system of medicine. Methods: Samples of galls of Q. infectoria were studied by macroscopical, microscopical, physiochemical, phytochemical, fluorescence analysis and othjer methods for standardization as recommended by WHO. Results:Macroscopically, the crude drug is globose with horny appearances on external surface (1.4-2.3 cm in length and 1-1.5 cm in diameter), with greyish-brown to brownish-black in colour externally and dark brown buff colored. Surface is smooth with numerous horny protuberances giving rough touch, and with unpleasant odour. Microscopically, a wide zone of radially elongated parenchyma cells between upper and lower epidermis were found. The vascular strands were present at all places and radially elongated sclerides touched the lower epidermis. In physico-chemical studies, the moisture, total ash, acid insoluble ash, alcohol soluble, water soluble, petroleum ether, chloroform extractive value and tannin content were found to be 2.790, 5.020, 0.110, 38.780, 41.210, 0.402, 1.590 and 49.200 percentage respectively. Preliminary phytochemical screening showed the presence of phenols, flavonoids, steroids, triterpenes, tannins, saponins and alkaloids. Conclusions:The results of the present study serve as a valuable source of information and provide suitable standards for identification of this medicinally important plant drug material for future investigations and applications.

Silencing Agrobacterium oncogenes in transgenic grapevine results in strain-specific crown gall resistance.

Science.gov (United States)

Galambos, A; Zok, A; Kuczmog, A; Oláh, R; Putnoky, P; Ream, W; Szegedi, E

2013-11-01

Grapevine rootstock transformed with an Agrobacterium oncogene-silencing transgene was resistant to certain Agrobacterium strains but sensitive to others. Thus, genetic diversity of Agrobacterium oncogenes may limit engineering crown gall resistance. Crown gall disease of grapevine induced by Agrobacterium vitis or Agrobacterium tumefaciens causes serious economic losses in viticulture. To establish crown gall-resistant lines, somatic proembryos of Vitis berlandieri × V. rupestris cv. 'Richter 110' rootstock were transformed with an oncogene-silencing transgene based on iaaM and ipt oncogene sequences from octopine-type, tumor-inducing (Ti) plasmid pTiA6. Twenty-one transgenic lines were selected, and their transgenic nature was confirmed by polymerase chain reaction (PCR). These lines were inoculated with two A. tumefaciens and three A. vitis strains. Eight lines showed resistance to octopine-type A. tumefaciens A348. Resistance correlated with the expression of the silencing genes. However, oncogene silencing was mostly sequence specific because these lines did not abolish tumorigenesis by A. vitis strains or nopaline-type A. tumefaciens C58.

Cecidonius pampeanus, gen. et sp. n.: an overlooked and rare, new gall-inducing micromoth associated with Schinus in southern Brazil (Lepidoptera, Cecidosidae).

Science.gov (United States)

Moreira, Gilson R P; Eltz, Rodrigo P; Pase, Ramoim B; Silva, Gabriela T; Bordignon, Sérgio A L; Mey, Wolfram; Gonçalves, Gislene L

2017-01-01

Galls induced by the larval stage of cecidosids (Lepidoptera: Cecidosidae) are complex, multi-trophic systems, still poorly studied. They may be associated with other insect feeding guilds, including inquilines, kleptoparasites, cecidophages, parasitoids, and predators. By causing death of the gall inducer early in life and altering the gall phenotype, inquilines may lead to misidentification of the true gall inducers. Here, we describe through light and scanning electron microscopy Cecidonius pampeanus , a new genus and species of cecidosid moth, from the Pampa biome, south Brazil. It induces unnoticed, small galls under swollen stems of Schinus weinmannifolius Mart. ex Engl. (Anacardiaceae). Such galls are severely attacked early in ontogeny either by unidentified parasitoids belonging to Lyrcus Walker (Pteromalidae) that feed upon the inducer, or by inquiline wasps of the genus Allorhogas Gahan (Braconidae). The inquilines modify the galls into large ones that last longer and promptly call attention. Free-living galls are rare and dehiscent, pupation of C. pampeanus occurring on the ground. Due to these reasons the true inducer has been overlooked in this case for more than a century. Additionally we inferred a phylogeny for Cecidosidae using sequences from mitochondrial and nuclear loci, and characterized genetic variation and gene flow across ten populations. Despite its natural history similarities with the African genus Scyrotis , Cecidonius is a much younger lineage, more closely related to the Neotropical cecidosids. C. pampeanus populations, which are now confined to a few mountain areas within its distribution range due to habitat destruction, are also genetically isolated, requiring conservation measures.

Population Dynamics of Native Parasitoids Associated with the Asian Chestnut Gall Wasp (Dryocosmus kuriphilus in Italy

Directory of Open Access Journals (Sweden)

Tiziana Panzavolta

2018-01-01

Full Text Available Native parasitoids may play an important role in biological control. They may either support or hinder the effectiveness of introduced nonnative parasitoids released for pest control purposes. Results of a three-year survey (2011–2013 of the Asian chestnut gall wasp (ACGW Dryocosmus kuriphilus Yasumatsu (Hymenoptera: Cynipidae populations and on parasitism rates by native indigenous parasitoids (a complex of chalcidoid hymenopterans in Italian chestnut forests are given. Changes in D. kuriphilus gall size and phenology were observed through the three years of study. A total of 13 species of native parasitoids were recorded, accounting for fluctuating parasitism rates. This variability in parasitism rates over the three years was mainly due to the effect of Torymus flavipes (Walker (Hymenoptera: Torymidae, which in 2011 accounted for 75% of all parasitoid specimens yet decreased drastically in the following years. This strong fluctuation may be related to climatic conditions. Besides, our data verified that parasitoids do not choose host galls based on their size, though when they do parasitize smaller ones, they exploit them better. Consequently, ACGWs have higher chances of surviving parasitism if they are inside larger galls.

Antibiosis and bmyB Gene Presence As Prevalent Traits for the Selection of Efficient Bacillus Biocontrol Agents against Crown Gall Disease

Directory of Open Access Journals (Sweden)

Olfa Frikha-Gargouri

2017-08-01

Full Text Available This study aimed to improve the screening method for the selection of Bacillus biocontrol agents against crown gall disease. The relationship between the strain biocontrol ability and their in vitro studied traits was investigated to identify the most important factors to be considered for the selection of effective biocontrol agents. In fact, previous selection procedure relying only on in vitro antibacterial activity was shown to be not suitable in some cases. A direct plant-protection strategy was performed to screen the 32 Bacillus biocontrol agent candidates. Moreover, potential in vitro biocontrol traits were investigated including biofilm formation, motility, hemolytic activity, detection of lipopeptide biosynthetic genes (sfp, ituC and bmyB and production of antibacterial compounds. The obtained results indicated high correlations of the efficiency of the biocontrol with the reduction of gall weight (p = 0.000 and the antibacterial activity in vitro (p = 0.000. Moreover, there was strong correlations of the efficiency of the biocontrol (p = 0.004 and the reduction in gall weight (p = 0.000 with the presence of the bmyB gene. This gene directs the synthesis of the lipopeptide bacillomycin belonging to the iturinic family of lipopeptides. These results were also confirmed by the two-way hierarchical cluster analysis and the correspondence analysis showing the relatedness of these four variables. According to the obtained results a new screening procedure of Bacillus biocontrol agents against crown gall disease could be advanced consisting on two step selection procedure. The first consists on selecting strains with high antibacterial activity in vitro or those harbouring the bmyB gene. Further selection has to be performed on tomato plants in vivo. Moreover, based on the results of the biocontrol assay, five potent strains exhibiting high biocontrol abilities were selected. They were identified as Bacillus subtilis or Bacillus

Insect-induced effects on plants and possible effectors used by galling and leaf-mining insects to manipulate their host-plant.

Science.gov (United States)

Giron, David; Huguet, Elisabeth; Stone, Graham N; Body, Mélanie

2016-01-01

Gall-inducing insects are iconic examples in the manipulation and reprogramming of plant development, inducing spectacular morphological and physiological changes of host-plant tissues within which the insect feeds and grows. Despite decades of research, effectors involved in gall induction and basic mechanisms of gall formation remain unknown. Recent research suggests that some aspects of the plant manipulation shown by gall-inducers may be shared with other insect herbivorous life histories. Here, we illustrate similarities and contrasts by reviewing current knowledge of metabolic and morphological effects induced on plants by gall-inducing and leaf-mining insects, and ask whether leaf-miners can also be considered to be plant reprogrammers. We review key plant functions targeted by various plant reprogrammers, including plant-manipulating insects and nematodes, and functionally characterize insect herbivore-derived effectors to provide a broader understanding of possible mechanisms used in host-plant manipulation. Consequences of plant reprogramming in terms of ecology, coevolution and diversification of plant-manipulating insects are also discussed. Copyright © 2015 Elsevier Ltd. All rights reserved.

The mono - and sesquiterpene content of aphid-induced galls on Pistacia palaestina is not a simple reflection of their composition in intact leaves.

Science.gov (United States)

Rand, Karin; Bar, Einat; Ben-Ari, Matan; Lewinsohn, Efraim; Inbar, Moshe

2014-06-01

Pistacia palaestina Boiss. (Anacardiaceae), a sibling species of P. terebinthus also known as turpentine tree or terebinth tree, is common in the Levant region. The aphid Baizongia pistaciae L. manipulates the leaves of the plant to form large galls, which provide both food and protection for its developing offspring. We analyzed the levels and composition of mono-and sesquiterpenes in both leaves and galls of ten naturally growing trees. Our results show that monoterpene hydrocarbons are the main constituents of P. palaestina leaves and galls, but terpene levels and composition vary among trees. Despite this inter-tree variation, terpene levels and compositions in galls from different trees resemble each other more than the patterns displayed by leaves from the same trees. Generally, galls contain 10 to 60 fold higher total terpene amounts than leaves, especially of the monoterpenes α-pinene and limonene. Conversely, the leaves generally accumulate more sesquiterpenes, in particular E-caryophyllene, germacrene D and δ-cadinene, in comparison to galls. Our results clearly show that the terpene pattern in the galls is not a simple reflection of that of the leaves and suggest that aphids have a strong impact on the metabolism of their host plant, possibly for their own defense.

Common cause failure analysis methodology for complex systems

International Nuclear Information System (INIS)

Wagner, D.P.; Cate, C.L.; Fussell, J.B.

1977-01-01

Common cause failure analysis, also called common mode failure analysis, is an integral part of a complex system reliability analysis. This paper extends existing methods of computer aided common cause failure analysis by allowing analysis of the complex systems often encountered in practice. The methods presented here aid in identifying potential common cause failures and also address quantitative common cause failure analysis

Franz Joseph Gall and music: The faculty and the bump

NARCIS (Netherlands)

Eling, P.A.T.M.; Finger, S.; Whitaker, H.A.

2015-01-01

The traditional story maintains that Franz Joseph Gall's (1758-1828) scientific program began with his observations of schoolmates with bulging eyes and good verbal memories. But his search to understand human nature, in particular individual differences in capacities, passions, and tendencies, can

Three types of gall-bladder motility at men with chronic cholecystitis and pyelonephritis and accompanying their parameters of kidney excretory function as well as metabolism

Directory of Open Access Journals (Sweden)

Oksana M Ivanyts’ka

2018-04-01

Full Text Available Background. Previously it has been shown that balneotherapy in the spa Truskavets’ (Ukraїna in men with chronic cholecystitis combined with pyelonephritis causes changes in gall-bladder motility. This is combined with changes in diurese and urinary excretion of metabolites.Individual analysis revealed not only quantitative but also qualitative differences in the postprandial motility of the gall-bladder. The purpose of this study is to identify the parameters of kidney excretory function as well as metabolism under which three types of the gall-bladdermotility skills differ significantly from each other. Materialandmethods. The object of observationwere the same ones 22men aged24-70 years old,who cameto the spaTruskavets’ for the treatment of chronic cholecystitiscombined withpyelonephritis inremission. On thetone and motility of gall-bladder judged byits fasting and postprandial volume (echocamera “Radmir”. In the daily  determined content of oxalate and nitrogen metabolites: creatinine, urea and uric acid, electrolytes: phosphates, chloride, calcium, magnesium, potassium and sodium. Nitrogenous metabolites in plasma of venous blood were determined also. The survey was conducted twice, before and after balneotherapy. Results. The method of cluster analysis has formed three homogeneous cholekinetics groups, namely:normokinesia as well as hypertonic-hyperkinetic and hyperkinetic-hypertonic dyskinesia.The method of discriminatory analysis revealed 13 parameters of daily urine and three parameters of blood, as well as body weight and height, electrokinetic index and Kerdoe’s index, in the totality of which three types of cholekinetics are clearly delineated.Conclusion. The type of postprandial cholekinetics is naturally associated with a number of parameters of the excretory renal function and metabolism.

Mechanisms Driving Galling Success in a Fragmented Landscape: Synergy of Habitat and Top-Down Factors along Temperate Forest Edges.

Directory of Open Access Journals (Sweden)

Nina-S Kelch

Full Text Available Edge effects play key roles in the anthropogenic transformation of forested ecosystems and their biota, and are therefore a prime field of contemporary fragmentation research. We present the first empirical study to address edge effects on the population level of a widespread galling herbivore in a temperate deciduous forest. By analyzing edge effects on abundance and trophic interactions of beech gall midge (Mikiola fagi Htg., we found 30% higher gall abundance in the edge habitat as well as lower mortality rates due to decreased top-down control, especially by parasitoids. Two GLM models with similar explanatory power (58% identified habitat specific traits (such as canopy closure and altitude and parasitism as the best predictors of gall abundance. Further analyses revealed a crucial influence of light exposure (46% on top-down control by the parasitoid complex. Guided by a conceptual framework synthesizing the key factors driving gall density, we conclude that forest edge proliferation of M. fagi is due to a complex interplay of abiotic changes and trophic control mechanisms. Most prominently, it is caused by the microclimatic regime in forest edges, acting alone or in synergistic concert with top-down pressure by parasitoids. Contrary to the prevailing notion that specialists are edge-sensitive, this turns M. fagi into a winner species in fragmented temperate beech forests. In view of the increasing proportion of edge habitats and the documented benefits from edge microclimate, we call for investigations exploring the pest status of this galling insect and the modulators of its biological control.

Effects of environmental parameters on the chestnut gall wasp and its complex of indigenous parasitoids

Science.gov (United States)

Bonsignore, Carmelo Peter; Bernardo, Umberto

2018-04-01

The chestnut gall wasp (CGW), Dryocosmus kuriphilus, an invasive pest native to China, has caused severe yield and economic losses to chestnut production in Europe since its arrival in 2002. In Southern Italy, the complex of indigenous parasitoids colonizing CGW was monitored between 2013 and 2015, with the aim of estimating the composition of the indigenous parasitoid complex, its ability to control CGW populations, and the interactions of both factors with several measured environmental parameters. We compared results among three differently managed field types. Results showed an increase in the rate of parasitism both when the host population density was lower and in unmanaged chestnut stands with more natural conditions. The percentage of parasitism in galls was related to morphological traits of the galls and to higher seasonal temperatures, which reduced the parasitism intensity because CGW develops earlier under such conditions. The host-parasitoid mortality inside galls varied among sites and was associated mostly with rot fungi during wet spring and summer months. Parasitoid species richness was similar among the study sites, but the proportion of parasitoid species differed between orchards and unmanaged coppice stands. The timing of attack by parasitoids followed a species-specific successional sequence throughout the larva-to-adult life cycle of the CGW. These interactions should be considered in future research on trophic relationships and when modeling invasive scenarios for new pest species.

Are gall midge species (Diptera, Cecidomyiidae host-plant specialists? Espécies de moscas galhadoras (Diptera, Cecidomyiidae são especialistas em plantas hospedeiras?

Directory of Open Access Journals (Sweden)

Marco Antonio A. Carneiro

2009-01-01

Full Text Available Despite the speciose fauna of gall-inducing insects in the Neotropical region, little is known about their taxonomy. On the other hand, gall morphotypes associated with host species have been extensively used as a surrogate of the inducer species worldwide. This study reviewed the described gall midges and their galls to test the generalization on the use of gall morphotypes as surrogates of gall midge species in the Brazilian fauna. We compiled taxonomic and biological data for 196 gall midge species recorded on 128 host plant species. Ninety two percent of those species were monophagous, inducing galls on a single host plant species, whereas only 5.6% species were oligophagous, inducing galls on more than one congeneric host plant species. Only four species induced galls on more than one host plant genus. We conclude that gall morphotypes associated with information on the host plant species and attacked organs are reliable surrogates of the gall-inducing species.Apesar do elevado número de espécies da fauna de insetos indutores de galhas na região Neotropical, muito pouco espécies foram descritas. Por outro lado, o morfotipo da galha associado com a espécie da planta hospedeira é em todo o mundo amplamente utilizado como um indicador da espécie de inseto indutor. Este estudo revê as espécies de cecidommídeos descritos e suas galhas para verificar a generalização do uso da morfologia da galha como indicador da espécie de cecidomíideo na fauna brasileira. Nós compilamos dados biológicos e taxonômicos de 196 espécies de cecidomiídeos em 128 espécies de plantas no Brasil. Noventa e dois porcento destas espécies foram monófagas, induzindo galhas em uma única espécie de planta hospedeira, enquanto somente 5,6% das espécies foram oligófagas, induzindo galhas em mais de uma espécie de planta do mesmo gênero. Somente quatro espécies induzem galhas em espécies de plantas de gêneros diferentes. Nós concluímos que o morfo

Isogeometric failure analysis

NARCIS (Netherlands)

Verhoosel, C.V.; Scott, M.A.; Borden, M.J.; Borst, de R.; Hughes, T.J.R.; Mueller-Hoeppe, D.; Loehnert, S.; Reese, S.

2011-01-01

Isogeometric analysis is a versatile tool for failure analysis. On the one hand, the excellent control over the inter-element continuity conditions enables a natural incorporation of continuum constitutive relations that incorporate higher-order strain gradients, as in gradient plasticity or damage.

ultrasound mis-diagnosis of biliary sludge as a gall bladder

African Journals Online (AJOL)

drclement

SUMMARY. Background: Cholecystosonography is the Ultrasound examination of the gall bladder and ducts. It has the advantage of not using ionising radiation, but may be operator dependent. Thus misinterpretation of the images may sometimes occur especially in the untrained hands. Case Report: A 24 year old male.

Life inside a gall: closeness does not favour horizontal transmission of Rickettsia between a gall wasp and its parasitoid.

Science.gov (United States)

Gualtieri, Liberata; Nugnes, Francesco; Nappo, Anna G; Gebiola, Marco; Bernardo, Umberto

2017-07-01

The incidence of horizontal transmission as a route for spreading symbiont infections is still being debated, but a common view is that horizontal transfers require intimate between-species relationships. Here we study a system that meets ideal requirements for horizontal transmission: the gall wasp Leptocybe invasa and its parasitoid Quadrastichus mendeli (Hymenoptera: Eulophidae). These wasps belong to the same subfamily, spend most of their lives inside the same minute gall and are both infected by Rickettsia, a maternally inherited endosymbiotic bacteria that infects several arthropods, sometimes manipulating their reproduction, like inducing thelytokous parthenogenesis in L. invasa. Despite intimate contact, close phylogenetic relationship and the parasitoid's host specificity, we show that host and parasitoid do not share the same Rickettsia. We provide indirect evidence that Rickettsia infecting Q. mendeli may be inducing thelytokous parthenogenesis, as the symbiont is densely present in the reproductive apparatus and is vertically transmitted. Phylogenetic analyses based on 16S and gltA placed this symbiont in the leech group. The confirmed and presumed parthenogenesis-inducing Rickettsia discovered so far only infect eulophid wasps, and belong to three different groups, suggesting multiple independent evolution of the parthenogenesis inducing phenotype. We also show some degree of cospeciation between Rickettsia and their eulophid hosts. © FEMS 2017. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Variations in the Spatial Distribution of Gall Bladder Cancer: A Call ...

African Journals Online (AJOL)

adjusted incidence rates (AAR) of certain cancers in specific geographical regions within ... which is second to the highest (Chile) in the world and AAR of carcinoma gall bladder .... Conflict of Interest: None declared. 4. Asmarian NS, Ruzitalab ...

Failure Analysis

International Nuclear Information System (INIS)

Iorio, A.F.; Crespi, J.C.

1987-01-01

After ten years of operation at the Atucha I Nuclear Power Station a gear belonging to a pressurized heavy water reactor refuelling machine, failed. The gear box was used to operate the inlet-outlet heavy-water valve of the machine. Visual examination of the gear device showed an absence of lubricant and that several gear teeth were broken at the root. Motion was transmitted with a speed-reducing device with controlled adjustable times in order to produce a proper fitness of the valve closure. The aim of this paper is to discuss the results of the gear failure analysis in order to recommend the proper solution to prevent further failures. (Author)

Solitary brain metastasis as an initial manifestation of gall bladder carcinoma

Directory of Open Access Journals (Sweden)

Kamlesh Kumar Harsh

2015-01-01

Full Text Available Gallbladder cancer is a common malignancy in Northern India, and it accounts for 2-4% of all malignant gastrointestinal tumors. It is an aggressive tumor with early dissemination to liver and lymph nodes and associated with poor prognosis. Systemic metastases from gall bladder carcinoma (Ca frequently occur; however, metastatic involvement of the central nervous system is rare and late manifestation and remains an ominous sign. Initial presentation of gall bladder Ca with brain metastasis is rare. We report a case of 65-year-old women who initially presented with a solitary brain metastasis from an adenocarcinoma of the gallbladder, which was diagnosed incidentally when the patient presented with headache, vomiting, and right temporal region swelling. Palliative chemotherapy and cranial radiotherapy were prescribed. She is symptom-free from 3 months after the completion of the treatment.

Galling arthropod diversity in adjacent swamp forests and restinga vegetation in Rio Grande do Sul, Brazil.

Science.gov (United States)

Mendonça, Milton De S; Piccardi, Hosana M F; Jahnke, Simone M; Dalbem, Ricardo V

2010-01-01

Galling arthropods create plant structures inside which they find shelter. Factors acting on galler diversity are still being discussed, with this fauna considered more diverse in xeric than mesic environments (higrothermic stress hypothesis, HSH), and also in more plant diverse sites. Here we compare galler abundance (N), equitability (E), species richness (S) and composition between adjacent restinga (xeric) and swamp forests (mesic) in Parque Estadual de Itapeva (29°21' S, 49°45' W), Rio Grande do Sul, southern Brazil. Five trails, two in swamp forest and three in restingas, were sampled four times each (January/December 2005). After an effort of 60h/person, 621 galled plant individuals belonging to 104 gall morphotypes were recorded. This suggests a high galler diversity for the Park, comparable to the richest places known. No differences were found for N, E or S between restingas and swamp forests. However, faunal composition differs significantly between the vegetation types. The dominant (most abundant) species are different in either vegetation type, and are rare or absent on the other vegetation type. Such species composition analysis is still largely ignored for gallers, and stresses the fact that the HSH cannot explain this pattern, since the latter is based on preferences by the ovipositing galler for xeric sites instead of mesic ones. The two habitats differ in microclimate, but species richness, as would be predicted by the HSH, does not differ. This small scale pattern can perhaps be attributed to biogeographic processes on larger scales, as suggested by the resource synchronisation hypothesis.

The application of Petri nets to failure analysis

International Nuclear Information System (INIS)

Liu, T.S.; Chiou, S.B.

1997-01-01

Unlike the technique of fault tree analysis that has been widely applied to system failure analysis in reliability engineering, this study presents a Petri net approach to failure analysis. It is essentially a graphical method for describing relations between conditions and events. The use of Petri nets in failure analysis enables to replace logic gate functions in fault trees, efficiently obtain minimal cut sets, and absorb models. It is demonstrated that for failure analysis Petri nets are more efficient than fault trees. In addition, this study devises an alternative; namely, a trapezoidal graph method in order to account for failure scenarios. Examples validate this novel method in dealing with failure analysis

Male gender and sonographic gall bladder wall thickness: important predictable factors for empyema and gangrene in acute cholecystitis

International Nuclear Information System (INIS)

Khan, M.L.U.; Jawed, M.; Shaikh, U.; Abbassi, M.R.

2014-01-01

Objective: To underline the status of male gender and gall bladder wall thickness as significant risk factors for acute cholecystitis complications. Methods: The retrospective study, with purposive sampling of the patients of acute cholecystits in age above 18 years, who were operated within 10 days of onset of symptoms, was conducted at the Department of Surgery, Dow University Hospital, Karachi, by reviewing the patients' medical record from March 2010 to August 2012. Correlation of incidence of acute cholecystitis complications (empyema and gangrene) to male gender and to the sonographic gall bladder wall thickness more than 4.5mm was analysed using SPSS 16. Result: Out of 62 patients, 8 (13%) patients had gangrene while 10 (16.12%) had empyema. Overall, there were 21 (33.87%) males in the study. Ten (47.6%) of the male patients developed empyema or gangrene of the gall bladder as a complication of acute cholecystitis. Of the 41 (66.12%) female patients, only 8 (19.5%) developed these complications. There were 22 (35.48%) cases of gall bladders with sonographic wall thickness more than 4.5mm who were operated for acute cholecystitis. Of them, 16 (72.7%) had empyema or gangrene. Conclusion: Male gender and sonographic gall bladder wall thickness more than 4.5mm were statistically significant risk factors for suspicion of complicated acute cholecystitis (empyema/gangrene) and by using these risk factors, we can prioritise patients for surgery in the emergency room. (author)

Distribution of gall crabs inhabiting mushroom corals on Semporna reefs, Malaysia

NARCIS (Netherlands)

van der Meij, Sancia E. T.; Hoeksema, Bert W.

Coral reef cryptofauna forms an important component of tropical marine biodiversity, consisting primarily of invertebrates dwelling in and on corals. During a survey carried out around the Semporna peninsula (Sabah, NE Borneo), the occurrence of gall crabs inhabiting mushroom corals was examined on

Co-occurrence of pathogenic and non-pathogenic Fusarium decemcellulare and Lasiodiplodia theobromae isolates in cushion galls disease of cacao (Theobroma cacao L.

Directory of Open Access Journals (Sweden)

Castillo Daynet Sosa del

2016-04-01

Full Text Available Flowery cushion gall of cacao is a disease complex with six types. Fusarium decemcellulare have been isolated from both flowery and green point galls and recognized as the etiological agent of the disease. In the present work we: i identified by ITS-rDNA sequencing and/or taxonomy the cultivable fungal species or Operative Taxonomic Units (OTUs associated with the five symptoms of cushion galls in cacao from Venezuela, and ii determined the gall inducing capacity on cacao peeled seeds after 45 days of inoculation with suspensions of mycelia/ spores from distinct isolate types. The whole isolate collection rendered an abundance of 113 isolates with a richness of 39 OTUs (27 and eight identified at the species or genera levels, respectively, and in unidentified fungi. The dominant recovered species (≈36% were F. decemcellulare and Lasiodiplodia theobromae. Some isolates of F. decemcellulare, L. theobromae, F. equiseti, Fusarium spp., F. solani, F. incarnatum, Rhizocthonia solani and Penicillium sp. were pathogenic. Some other isolates of the first six mentioned taxa behave as non-pathogenic. Furthermore, pathogenic and non-pathogenic isolates can also co-occur within a single plant and gall type. Moreover, 2-5 species within a single gall symptom in a single tree were identified (not necessarily at the same point in the tree, indicating a broad diversity of co-occurring taxa.

Occurrence and gall characterization in a fragment of Seasonal Semideciduous Forest in Telêmaco Borba, Paraná, Brazil

Directory of Open Access Journals (Sweden)

Patrícia de Oliveira Santos

2015-12-01

Full Text Available Galls surveys in Paraná are scarce and most sampling efforts in Brazil have still been concentrated on Cerrado regions. In this context, the present study investigated an area of semideciduous forest of Fazenda Monte Alegre in Telêmaco Borba, in order to contribute to the knowledge of galls in the state. Samples were collected on a 300m long track and 5m width, through active search up to two meters high. Fourty-one morphotypes were found, thirteen of which were identified to the host plant species level, ten according to level of genus, ten to family level and eight morphotypes were not identified. Among the identified families, Solanaceae, Asteraceae, Euphorbiaceae, Bignoniaceae, Melastomataceae and Leguminosae-Fabaceae represented the greatest quantity of morphotypes. Most of them occurred on the leaf (39%, 98.6% are entomogenous. 70.7% are glabrous, and as for the shape, most of them were classified as globular (43.9%. As for the way galls grouping on host plants, 46.3% showed up in isolation, and 53.7% in groupings. This study has contributed to enrich the knowledge on galls in the state of Paraná and for the Atlantic Forest Biome.

The interaction of NDE and failure analysis

International Nuclear Information System (INIS)

Nichols, R.W.

1988-01-01

This paper deals with the use of Non-Destructive Examination (NDE) and failure analysis for the assessment of the structural integrity. It appears that failure analysis enables to know whether NDE is required or not, and can help to direct NDE into the most useful directions by identifying the areas where it is most important that defects are absent. It also appears that failure analysis can help the operator to decide which NDE method is best suited to the component studied and provides detailed specifications for this NDE method. The interaction between failure analysis and NDE is then described. (TEC)

The interaction of NDE and failure analysis

Energy Technology Data Exchange (ETDEWEB)

Nichols, R W

1988-12-31

This paper deals with the use of Non-Destructive Examination (NDE) and failure analysis for the assessment of the structural integrity. It appears that failure analysis enables to know whether NDE is required or not, and can help to direct NDE into the most useful directions by identifying the areas where it is most important that defects are absent. It also appears that failure analysis can help the operator to decide which NDE method is best suited to the component studied and provides detailed specifications for this NDE method. The interaction between failure analysis and NDE is then described. (TEC).

Size, age and composition: characteristics of plant taxa as diversity predictors of gall-midges (Diptera: Cecidomyiidae

Directory of Open Access Journals (Sweden)

Walter S Araújo

2011-12-01

Full Text Available Many hypotheses have been proposed to explain the diversity of gall-midge insects (Diptera: Cecidomyiidae, some of them taking into account plant diversity. This study aims to test the importance of size, age and composition of host plant taxa in the diversity of Cecidomyiidae. For this we used inventories data on the diversity of galling and host plants in Brazil. We found that Asterales, Myrtales and Malpighiales, were the most important orders, with 34, 33 and 25, gall morphotypes, respectively. The most representative host families were Asteraceae (34 morphotypes, Myrtaceae (23 and Fabaceae (22. In general, the order size and the plant family were good predictors of the galling diversity, but not the taxon age. The most diverse host genera for gall-midges were Mikania, Eugenia and Styrax, with 15, 13 and nine galler species, respectively. The size of plant genera showed no significant relationship with the richness of Cecidomyiidae, contrary to the prediction of the plant taxon size hypothesis. The plant genera with the greatest diversity of galling insects are not necessarily those with the greatest number of species. These results indicate that some plant taxa have a high intrinsic richness of galling insects, suggesting that the plant species composition may be equally or more important for the diversity of gall-midges than the size or age of the host taxon. Rev. Biol. Trop. 59 (4: 1599- 1607. Epub 2011 December 01.Muchas hipótesis se han propuesto para explicar la diversidad de dipteros de la familia Cecidomyiidae, algunos de ellos teniendo en cuenta la diversidad de las plantas. Este estudio tiene como objetivo probar la importancia del tamaño, la edad y la composición de las plantas en la diversidad de Cecidomyiidae, a través de los inventarios de las agallas y las plantas hospederas, en Brasil. Asterales, Malpighiales y Myrtales fueron los órdenes más importantes, con 34, 33 y 25 tipos de agallas, respectivamente. Las familias m

The cause, incidence and severity of a new gall damage on ...

African Journals Online (AJOL)

develop Integrated Pest Management (IPM) strategies against the new Eucalyptus pest. Key words: Alien insects, Galls. Leptocybe invasa, pest management, tree plantation. Introduction. Tree growing is important to many ... refugee settlements in Uganda to protect the environment while ensuring sustainable supply of tree ...

Analysis of failures in concrete containments

International Nuclear Information System (INIS)

Moreno-Gonzalez, A.

1989-09-01

The function of Containment, in an accident event, is to avoid the release of radioactive substances into the surroundings. Containment failure, therefore, is defined as the appearance of leak paths to the external environment. These leak paths may appear either as a result of loss of leaktightness due to degradation of design conditions or structural failure with containment material break. This document is a survey of the state of the art of Containment Failure Analysis. It gives a detailed description of all failure mechanisms, indicating all the possible failure modes and their causes, right from failure resulting from degradation of the materials to structural failure and linear breake failure. Following the description of failure modes, possible failure criteria are identified, with special emphasis on structural failure criteria. These criteria have been obtained not only from existing codes but also from the latest experimental results. A chapter has been dedicated exclusively to failure criteria in conventional structures, for the purpose of evaluating the possibility of application to the case of containment. As the structural behaviour of the containment building is very complex, it is not possible to define failure through a single parameter. It is therefore advisable to define a methodology for containment failure analysis which could be applied to a particular containment. This methodology should include prevailing load and material conditions together with the behaviour of complex conditions such as the liner-anchorage-cracked concrete interaction

Testing Optimal Foraging Theory Using Bird Predation on Goldenrod Galls

Science.gov (United States)

Yahnke, Christopher J.

2006-01-01

All animals must make choices regarding what foods to eat, where to eat, and how much time to spend feeding. Optimal foraging theory explains these behaviors in terms of costs and benefits. This laboratory exercise focuses on optimal foraging theory by investigating the winter feeding behavior of birds on the goldenrod gall fly by comparing…

Yeast transformation mediated by Agrobacterium strains harboring an Ri plasmid: comparative study between GALLS of an Ri plasmid and virE of a Ti plasmid.

Science.gov (United States)

Kiyokawa, Kazuya; Yamamoto, Shinji; Sato, Yukari; Momota, Naoto; Tanaka, Katsuyuki; Moriguchi, Kazuki; Suzuki, Katsunori

2012-07-01

Agrobacterium strains containing a Ti plasmid can transfer T-DNA not only to plants but also to fungi, including the yeast Saccharomyces cerevisiae. However, no Agrobacterium strain harboring an Ri plasmid has been evaluated in fungal transformation. Some Ri plasmids have GALLS , instead of virE1 and virE2. GALLS protein can functionally substitute in plant transformation for a structurally different protein VirE2. In this study, we compared the yeast transformation ability among Agrobacterium donors: a strain containing a Ti plasmid, strains harboring either an agropine-type or a mikimopine-type Ri plasmid, and a strain having a modified Ri plasmid supplemented with a Ti plasmid type virE operon. Agrobacterium strains possessing GALLS transformed yeast cells far less efficiently than the strain containing virE operon. Production of GALLS in recipient yeast cells improved the yeast transformation mediated by an Agrobacterium strain lacking neither GALLS nor virE operon. A reporter assay to detect mobilization of the proteins fused with Cre recombinase revealed that VirE2 protein is much more abundant in yeast cells than GALLS. Based on these results, we concluded that the low yeast transformability mediated by Agrobacterium strains having the Ri plasmid is because of low amount of mobilized GALLS in yeast cells. © 2012 The Authors Journal compilation © 2012 by the Molecular Biology Society of Japan/Blackwell Publishing Ltd.

FRAC (failure rate analysis code): a computer program for analysis of variance of failure rates. An application user's guide

International Nuclear Information System (INIS)

Martz, H.F.; Beckman, R.J.; McInteer, C.R.

1982-03-01

Probabilistic risk assessments (PRAs) require estimates of the failure rates of various components whose failure modes appear in the event and fault trees used to quantify accident sequences. Several reliability data bases have been designed for use in providing the necessary reliability data to be used in constructing these estimates. In the nuclear industry, the Nuclear Plant Reliability Data System (NPRDS) and the In-Plant Reliability Data System (IRPDS), among others, were designed for this purpose. An important characteristic of such data bases is the selection and identification of numerous factors used to classify each component that is reported and the subsequent failures of each component. However, the presence of such factors often complicates the analysis of reliability data in the sense that it is inappropriate to group (that is, pool) data for those combinations of factors that yield significantly different failure rate values. These types of data can be analyzed by analysis of variance. FRAC (Failure Rate Analysis Code) is a computer code that performs an analysis of variance of failure rates. In addition, FRAC provides failure rate estimates

Dependent failure analysis of NPP data bases

International Nuclear Information System (INIS)

Cooper, S.E.; Lofgren, E.V.; Samanta, P.K.; Wong Seemeng

1993-01-01

A technical approach for analyzing plant-specific data bases for vulnerabilities to dependent failures has been developed and applied. Since the focus of this work is to aid in the formulation of defenses to dependent failures, rather than to quantify dependent failure probabilities, the approach of this analysis is critically different. For instance, the determination of component failure dependencies has been based upon identical failure mechanisms related to component piecepart failures, rather than failure modes. Also, component failures involving all types of component function loss (e.g., catastrophic, degraded, incipient) are equally important to the predictive purposes of dependent failure defense development. Consequently, dependent component failures are identified with a different dependent failure definition which uses a component failure mechanism categorization scheme in this study. In this context, clusters of component failures which satisfy the revised dependent failure definition are termed common failure mechanism (CFM) events. Motor-operated valves (MOVs) in two nuclear power plant data bases have been analyzed with this approach. The analysis results include seven different failure mechanism categories; identified potential CFM events; an assessment of the risk-significance of the potential CFM events using existing probabilistic risk assessments (PRAs); and postulated defenses to the identified potential CFM events. (orig.)

Gall mite inspection on dormant black currant buds using machine vision

DEFF Research Database (Denmark)

Nielsen, M. R.; Stigaard Laursen, Morten; Jonassen, M. S.

2013-01-01

This paper presents a novel machine vision-based approach detecting and mapping gall mite infection in dormant buds on black currant bushes. A vehicle was fitted with four cameras and RTK-GPS. Results compared automatic detection to human decisions based on the images, and by mapping the results...

14 CFR 417.224 - Probability of failure analysis.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Probability of failure analysis. 417.224..., DEPARTMENT OF TRANSPORTATION LICENSING LAUNCH SAFETY Flight Safety Analysis § 417.224 Probability of failure..., must account for launch vehicle failure probability in a consistent manner. A launch vehicle failure...

Correlation between Copper, Zinc and some lipids in serum, bile and stones of patients with gall stone disease

International Nuclear Information System (INIS)

Abu-Farsakh, F.

1997-01-01

Measurements of Cu, Zn and some lipid concentrations were carried out in serum, bile and gall stone samples collected from 76 patients undergoing surgery for removal of gall stones. The results showed that Cu and Zn were present in micromolar concentration in bile (average Cu concentration = 13.4 ± 0.92, average Zn concentration = 13.4 ± 1.05) and gall stones (average Cu concentration = 2.8 ± 0.16, average Zn concentration = 1.8 ± 0.16 mmol/ g stone). Cross-tabulation of the results showed significant positive linear correlations (p< 0.01) between stone Zn vs. bile cholesterol (r = 0.253), stone Zn vs. bile bilirubin (r = 0.396) (in mixed stones only). This suggested that the more hydrophobic the bile sample, the more Zn co-precipitate with cholesterol or bilirubin. (author). 17 refs., 3 tabs

77 FR 21813 - Changes to the Generic Aging Lessons Learned (GALL) Report Revision 2 AMP XI.M41, “Buried and...

Science.gov (United States)

2012-04-11

... NUCLEAR REGULATORY COMMISSION [NRC-2012-0055] Changes to the Generic Aging Lessons Learned (GALL) Report Revision 2 AMP XI.M41, ``Buried and Underground Piping and Tanks'' AGENCY: Nuclear Regulatory... Guidance (LR-ISG), LR-ISG-2011-03, ``Changes to GALL Report Revision 2 Aging Management Program (AMP) XI...

Failure Analysis Of Industrial Boiler Pipe

International Nuclear Information System (INIS)

Natsir, Muhammad; Soedardjo, B.; Arhatari, Dewi; Andryansyah; Haryanto, Mudi; Triyadi, Ari

2000-01-01

Failure analysis of industrial boiler pipe has been done. The tested pipe material is carbon steel SA 178 Grade A refer to specification data which taken from Fertilizer Company. Steps in analysis were ; collection of background operation and material specification, visual inspection, dye penetrant test, radiography test, chemical composition test, hardness test, metallography test. From the test and analysis result, it is shown that the pipe failure caused by erosion and welding was shown porosity and incomplete penetration. The main cause of failure pipe is erosion due to cavitation, which decreases the pipe thickness. Break in pipe thickness can be done due to decreasing in pipe thickness. To anticipate this problem, the ppe will be replaced with new pipe

The investigation of preparations diluent cholestrol stones of gall-bladder and bile-ducts

International Nuclear Information System (INIS)

Kadirov, A.Kh.; Khaydarov, K.Kh.; Giyosov, A.Sh.

2000-01-01

In this chapter of book authors made conclusion that developed synthesis methods can be used at receiving new bile acids derivatives and they can find use as medical products in particular as preparations diluent gall-cholesteric stones

Combinatorial analysis of systems with competing failures subject to failure isolation and propagation effects

International Nuclear Information System (INIS)

Xing Liudong; Levitin, Gregory

2010-01-01

This paper considers the reliability analysis of binary-state systems, subject to propagated failures with global effect, and failure isolation phenomena. Propagated failures with global effect are common-cause failures originated from a component of a system/subsystem causing the failure of the entire system/subsystem. Failure isolation occurs when the failure of one component (referred to as a trigger component) causes other components (referred to as dependent components) within the same system to become isolated from the system. On the one hand, failure isolation makes the isolated dependent components unusable; on the other hand, it prevents the propagation of failures originated from those dependent components. However, the failure isolation effect does not exist if failures originated in the dependent components already propagate globally before the trigger component fails. In other words, there exists a competition in the time domain between the failure of the trigger component that causes failure isolation and propagated failures originated from the dependent components. This paper presents a combinatorial method for the reliability analysis of systems subject to such competing propagated failures and failure isolation effect. Based on the total probability theorem, the proposed method is analytical, exact, and has no limitation on the type of time-to-failure distributions for the system components. An illustrative example is given to demonstrate the basics and advantages of the proposed method.

Practices to manage chestnut orchards infested by the Chinese gall wasp

Directory of Open Access Journals (Sweden)

Turchetti T

2012-10-01

Full Text Available The rapid spread of the Chinese gall wasp (Dryocosmus kuriphilus Yasumatsu in Italian chestnut growing areas is causing new criticisms. In this context, in addition to a clear plant suffering due to the wasp infestation, the dangerous recurrence of chestnut blight and the sudden spread of Gnomoniopsis sp., a coloniser of galls but also the etiological agent of nut brown rot, must be considered. Therefore, it is very important to increase the plants’ vigour and prevent their decline. Preliminary experiments were carried out in different Italian regions between 2010 and 2011. Organic plant fertilizers were applied to plants showing middle or high defoliation levels caused by the wasp attacks. The observations carried out during the growing season indicate a good vegetative restart in the treated plants compared to the untreated controls, in all the situations and independently of the fertilizers applied. Most of the treated plants (between the 75% and the 100% showed an evident improvement in the canopy vegetation, while the untreated controls were always classified in the worse classes of crown condition. These preliminary results highlight the efficacy of this kind of treatments for infested chestnut stands. This strategy, which is based on the preliminary evaluation of the plant vigour (following the proposed scale of attack severity and lack of foliage, consists in a manuring treatment at vegetative restart, which can be repeated in the following years in dependence on the results obtained. Moreover, pruning may be suggested only to manage the development of plants showing a definite recovery. The gall wasp pullulation requires new management strategies aimed at preserving the chestnut orchards, in order to avoid the chestnut cultivation to be marginalized or abandoned.

Larvae and Nests of Aculeate Hymenoptera (Hymenoptera: Aculeata) Nesting in Reed Galls Induced by Lipara spp. (Diptera: Chloropidae) with a Review of Species Recorded. Part II.

Science.gov (United States)

Astapenková, Alena; Heneberg, Petr; Bogusch, Petr

2017-01-01

The ability of aculeate Hymenoptera to utilize wetlands is poorly understood, and descriptions of their nests and developmental stages are largely absent. Here we present results based on our survey of hymenopterans using galls induced by Lipara spp. flies on common reed Phragmites australis in the years 2015-2016. We studied 20,704 galls, of which 9,446 were longitudinally cut and the brood from them reared in the laboratory, while the remaining 11,258 galls reared in rearing bags also in laboratory conditions. We recorded eight species that were previously not known to nest in reed galls: cuckoo wasps Chrysis rutilans and Trichrysis pumilionis, solitary wasps Stenodynerus chevrieranus and Stenodynerus clypeopictus, and bees Pseudoanthidium tenellum, Stelis punctulatissima, Hylaeus communis and Hylaeus confusus. Forty five species of Hymenoptera: Aculeata are known to be associated with reed galls, of which 36 make their nests there, and the other are six parasitoids of the family Chrysididae and three cuckoo bees of the genus Stelis. Of these species, Pemphredon fabricii and in southern Europe also Heriades rubicola are very common in reed galls, followed by Hylaeus pectoralis and two species of the genus Trypoxylon. We also found new host-parasite associations: Chrysis angustula in nests of Pemphredon fabricii, Chrysis rutilans in nests of Stenodynerus clypeopictus, Trichrysis pumilionis in nests of Trypoxylon deceptorium, and Stelis breviuscula in nests of Heriades rubicola. We provide new descriptions of the nests of seven species nesting in reed galls and morphology of mature larvae of eight species nesting in reed galls and two parasitoids and one nest cleptoparasite. The larvae are usually very similar to those of related species but possess characteristics that make them easy to distinguish from related species. Our results show that common reeds are not only expansive and harmful, but very important for many insect species associated with habitats

Failure rate analysis using GLIMMIX

International Nuclear Information System (INIS)

Moore, L.M.; Hemphill, G.M.; Martz, H.F.

1998-01-01

This paper illustrates use of a recently developed SAS macro, GLIMMIX, for implementing an analysis suggested by Wolfinger and O'Connell (1993) in modeling failure count data with random as well as fixed factor effects. Interest in this software tool arose from consideration of modernizing the Failure Rate Analysis Code (FRAC), developed at Los Alamos National Laboratory in the early 1980's by Martz, Beckman and McInteer (1982). FRAC is a FORTRAN program developed to analyze Poisson distributed failure count data as a log-linear model, possibly with random as well as fixed effects. These statistical modeling assumptions are a special case of generalized linear mixed models, identified as GLMM in the current statistics literature. In the nearly 15 years since FRAC was developed, there have been considerable advances in computing capability, statistical methodology and available statistical software tools allowing worthwhile consideration of the tasks of modernizing FRAC. In this paper, the approaches to GLMM estimation implemented in GLIMMIX and in FRAC are described and a comparison of results for the two approaches is made with data on catastrophic time-dependent pump failures from a report by Martz and Whiteman (1984). Additionally, statistical and graphical model diagnostics are suggested and illustrated with the GLIMMIX analysis results

Ellagitannins, gallotannins, and gallo-ellagitannins from the galls of Tamarix aphylla.

Science.gov (United States)

Orabi, Mohamed A A; Yoshimura, Morio; Amakura, Yoshiaki; Hatano, Tsutomu

2015-07-01

Chromatographic separation of an aqueous acetone extract of the galls from Tamarix aphylla using gels resulted in isolation of an ellagitannin, phyllagallin M1 (13), a gallo-ellagitannin, phyllagallin D1 (14), and four gallotannins, phyllagallin M2 (15) and phyllagallins D2-D4 (16-18), in addition to four known ellagitannins and three phenolics of lower molecular weight structurally related to hydrolyzable tannins. The structures of the six new tannins were elucidated based on spectroscopic and chemical data. Among the phenolics, flavogallonic acid dilactone (8), which is presumed to be biogenetically produced by C-C oxidative coupling of an ellagic acid unit with a galloyl residue, shows an exceptional oxidative pattern of gallic acid residues in plants of the family Tamaricaceae. Although the ellagitannin tamarixellagic acid (4) was reported to be a constituent of the galls of T. aphylla, such compounds with anomalous location of the DHDG moiety at O-3 on the glucopyranose core have not been observed among the tannins of tamaricaceous plants. Copyright © 2015 Elsevier B.V. All rights reserved.

BAY K 8644-induced oscillations in rabbit gall-bladder transepithelial potential difference

DEFF Research Database (Denmark)

Hansen, C P; Holstein-Rathlou, N H; Frederiksen, O

1986-01-01

The effects of the Ca2+-channel activator BAY K 8644 (a novel dihydropyridine) on transepithelial potential difference (Pd), electrical resistance (Rt), and unidirectional Na+-fluxes were studied in the rabbit gall-bladder. It was observed that BAY K 8644 at concentrations between 10(-7) and 10...

Failure diagnosis and fault tree analysis

International Nuclear Information System (INIS)

Weber, G.

1982-07-01

In this report a methodology of failure diagnosis for complex systems is presented. Systems which can be represented by fault trees are considered. This methodology is based on switching algebra, failure diagnosis of digital circuits and fault tree analysis. Relations between these disciplines are shown. These relations are due to Boolean algebra and Boolean functions used throughout. It will be shown on this basis that techniques of failure diagnosis and fault tree analysis are useful to solve the following problems: 1. describe an efficient search of all failed components if the system is failed. 2. Describe an efficient search of all states which are close to a system failure if the system is still operating. The first technique will improve the availability, the second the reliability and safety. For these problems, the relation to methods of failure diagnosis for combinational circuits is required. Moreover, the techniques are demonstrated for a number of systems which can be represented by fault trees. (orig./RW) [de

Testing the Role of Habitat Isolation among Ecologically Divergent Gall Wasp Populations

Directory of Open Access Journals (Sweden)

Scott P. Egan

2012-01-01

Full Text Available Habitat isolation occurs when habitat preferences lower the probability of mating between individuals associated with differing habitats. While a potential barrier to gene flow during ecological speciation, the effect of habitat isolation on reproductive isolation has rarely been directly tested. Herein, we first estimated habitat preference for each of six populations of the gall wasp Belonocnema treatae inhabiting either Quercus virginiana or Q. geminata. We then estimated the importance of habitat isolation in generating reproductive isolation between B. treatae populations that were host specific to either Q. virginiana or Q. geminata by measuring mate preference in the presence and absence of the respective host plants. All populations exhibited host preference for their native plant, and assortative mating increased significantly in the presence of the respective host plants. This host-plant-mediated assortative mating demonstrates that habitat isolation likely plays an important role in promoting reproductive isolation among populations of this host-specific gall former.

Migration Monitoring of Blackcurrant Gall Mite (Cecidophyopsis ribis Westw. from Buds to Leaves on Several Blackcurrant (Ribes nigrum L. Cultivars

Directory of Open Access Journals (Sweden)

Piotrowski Wojciech

2016-12-01

Full Text Available The blackcurrant gall mite (Cecidophyopsis ribis is the most important pest of blackcurrant crops. Over recent years withdrawal from plant protection programmes of chemical products (endosulfan and amitraz used for the control of this pest in Poland, has led to an observed increase in population numbers. In 2013, fenpiroxymate (Ortus 05 SC became registered for control of this pest. It is deemed best that chemical protection should be used during the migration period; when big gall mites emerge from buds in search of new buds. The studies were carried out in a plantation of blackcurrants during 2011-2013. The assessment of migration of the blackcurrant gall mite was carried out on the cultivars ‘Ben Hope’, ‘Ben Alde’r, ‘Ojeby’n and ‘Ruben’. Every year, from selected cultivars buds were collected. They were then placed on blackcurrant leaves within Petri dishes. After one, three and five days of placing buds on the leaves, the estimated number of eriophyid mites on the leaves was calculated. The data has shown a very useful method for monitoring blackcurrant gall mite, which can be used in calculating the treatment dates for this pest. Also, the data has shown that differences in the periods of migration of the mite are dependent on the cultivar and time of flowering. Among the cultivars observed the least susceptible to colonization by the blackcurrant gall mite was a Polish cultivar ‘Ruben’, while the most susceptible cultivar was ‘Ben Hope’.

Failure and damage analysis of advanced materials

CERN Document Server

Sadowski, Tomasz

2015-01-01

The papers in this volume present basic concepts and new developments in failure and damage analysis with focus on advanced materials such as composites, laminates, sandwiches and foams, and also new metallic materials. Starting from some mathematical foundations (limit surfaces, symmetry considerations, invariants) new experimental results and their analysis are shown. Finally, new concepts for failure prediction and analysis will be introduced and discussed as well as new methods of failure and damage prediction for advanced metallic and non-metallic materials. Based on experimental results the traditional methods will be revised.

Failure analysis of real-time systems

International Nuclear Information System (INIS)

Jalashgar, A.; Stoelen, K.

1998-01-01

This paper highlights essential aspects of real-time software systems that are strongly related to the failures and their course of propagation. The significant influence of means-oriented and goal-oriented system views in the description, understanding and analysing of those aspects is elaborated. The importance of performing failure analysis prior to reliability analysis of real-time systems is equally addressed. Problems of software reliability growth models taking the properties of such systems into account are discussed. Finally, the paper presents a preliminary study of a goal-oriented approach to model the static and dynamic characteristics of real-time systems, so that the corresponding analysis can be based on a more descriptive and informative picture of failures, their effects and the possibility of their occurrence. (author)

A comparative analysis of genetic differentiation across six shared willow host species in leaf- and bud-galling sawflies.

Directory of Open Access Journals (Sweden)

Sanna A Leppänen

Full Text Available Genetic divergence and speciation in plant-feeding insects could be driven by contrasting selection pressures imposed by different plant species and taxa. While numerous examples of host-associated differentiation (HAD have been found, the overall importance of HAD in insect diversification remains unclear, as few studies have investigated its frequency in relation to all speciation events. One promising way to infer the prevalence and repeatability of HAD is to estimate genetic differentiation in multiple insect taxa that use the same set of hosts. To this end, we measured and compared variation in mitochondrial COI and nuclear ITS2 sequences in population samples of leaf-galling Pontania and bud-galling Euura sawflies (Hymenoptera: Tenthredinidae collected from six Salix species in two replicate locations in northern Fennoscandia. We found evidence of frequent HAD in both species complexes, as individuals from the same willow species tended to cluster together on both mitochondrial and nuclear phylogenetic trees. Although few fixed differences among the putative species were found, hierarchical AMOVAs showed that most of the genetic variation in the samples was explained by host species rather than by sampling location. Nevertheless, the levels of HAD measured across specific pairs of host species were not correlated in the two focal galler groups. Hence, our results support the hypothesis of HAD as a central force in herbivore speciation, but also indicate that evolutionary trajectories are only weakly repeatable even in temporally overlapping radiations of related insect taxa.

Serine Proteases-Like Genes in the Asian Rice Gall Midge Show Differential Expression in Compatible and Incompatible Interactions with Rice

Directory of Open Access Journals (Sweden)

Suresh Nair

2011-04-01

Full Text Available The Asian rice gall midge, Orseolia oryzae (Wood-Mason, is a serious pest of rice. Investigations into the gall midge-rice interaction will unveil the underlying molecular mechanisms which, in turn, can be used as a tool to assist in developing suitable integrated pest management strategies. The insect gut is known to be involved in various physiological and biological processes including digestion, detoxification and interaction with the host. We have cloned and identified two genes, OoprotI and OoprotII, homologous to serine proteases with the conserved His87, Asp136 and Ser241 residues. OoProtI shared 52.26% identity with mosquito-type trypsin from Hessian fly whereas OoProtII showed 52.49% identity to complement component activated C1s from the Hessian fly. Quantitative real time PCR analysis revealed that both the genes were significantly upregulated in larvae feeding on resistant cultivar than in those feeding on susceptible cultivar. These results provide an opportunity to understand the gut physiology of the insect under compatible or incompatible interactions with the host. Phylogenetic analysis grouped these genes in the clade containing proteases of phytophagous insects away from hematophagous insects.

ERGO Jazz Session võõrustab Chris Gall Triot. Vennad Urbid ajakohaste lauludega

Index Scriptorium Estoniae

2008-01-01

14. septembril alustab Jazzkaar koostöös ERGO Kindlustusega uut sarja ERGO Jazz Session, mille avaesinejaks on Chris Gall Trio (kontserdid 14. sept.Kumu auditooriumis ja 15. sept. Tartus Athena keskuses). Vendade Urbide kontserdist "Aeg" 13. sept. Vanemuise kontserdimajas

Expression of putative expansin genes in phylloxera (Daktulosphaira vitifoliae Fitch) induced root galls of Vitis spp.

Science.gov (United States)

Lawo, N C; Griesser, M; Forneck, A

Grape phylloxera ( Daktulosphaira vitifoliae Fitch) is a serious global pest in viticulture. The insects are sedentary feeders and require a gall to feed and reproduce. The insects induce their feeding site within the meristematic zone of the root tip, where they stay attached, feeding both intra- and intercellularly, and causing damage by reducing plant vigour. Several changes in cell structure and composition, including increased cell division and tissue swelling close to the feeding site, cause an organoid gall called a nodosity to develop. Because alpha expansin genes are involved in cell enlargement and cell wall loosening in many plant tissues it may be anticipated that they are also involved in nodosity formation. To identify expansin genes in Vitis vinifera cv. Pinot noir , we mined for orthologues genes in a comparative analysis. Eleven putative expansin genes were identified and shown to be present in the rootstock Teleki 5C ( V. berlandieri Planch. x V. riparia Michx.) using specific PCR followed by DNA sequencing. Expression analysis of young and mature nodosities and uninfested root tips were conducted via quantitative real time PCR (qRT-PCR). Up-regulation was measured for three putative expansin genes (VvEXPA15, -A17 and partly -A20) or down-regulation for three other putative genes (VvEXPA7, -A12, -A20) in nodosities. The present study clearly shows the involvement of putative expansin genes in the phylloxera-root interaction.

Constructing Ontology for Knowledge Sharing of Materials Failure Analysis

Directory of Open Access Journals (Sweden)

Peng Shi

2014-01-01

Full Text Available Materials failure indicates the fault with materials or components during their performance. To avoid the reoccurrence of similar failures, materials failure analysis is executed to investigate the reasons for the failure and to propose improved strategies. The whole procedure needs sufficient domain knowledge and also produces valuable new knowledge. However, the information about the materials failure analysis is usually retained by the domain expert, and its sharing is technically difficult. This phenomenon may seriously reduce the efficiency and decrease the veracity of the failure analysis. To solve this problem, this paper adopts ontology, a novel technology from the Semantic Web, as a tool for knowledge representation and sharing and describes the construction of the ontology to obtain information concerning the failure analysis, application area, materials, and failure cases. The ontology represented information is machine-understandable and can be easily shared through the Internet. At the same time, failure case intelligent retrieval, advanced statistics, and even automatic reasoning can be accomplished based on ontology represented knowledge. Obviously this can promote the knowledge sharing of materials service safety and improve the efficiency of failure analysis. The case of a nuclear power plant area is presented to show the details and benefits of this method.

Data needs for common cause failure analysis

International Nuclear Information System (INIS)

Parry, G.W.; Paula, H.M.; Rasmuson, D.; Whitehead, D.

1990-01-01

The procedures guide for common cause failure analysis published jointly by USNRC and EPRI requires a detailed historical event analysis. Recent work on the further development of the cause-defense picture of common cause failures introduced in that guide identified the information that is necessary to perform the detailed analysis in an objective manner. This paper summarizes these information needs

Integrated failure probability estimation based on structural integrity analysis and failure data: Natural gas pipeline case

International Nuclear Information System (INIS)

Dundulis, Gintautas; Žutautaitė, Inga; Janulionis, Remigijus; Ušpuras, Eugenijus; Rimkevičius, Sigitas; Eid, Mohamed

2016-01-01

In this paper, the authors present an approach as an overall framework for the estimation of the failure probability of pipelines based on: the results of the deterministic-probabilistic structural integrity analysis (taking into account loads, material properties, geometry, boundary conditions, crack size, and defected zone thickness), the corrosion rate, the number of defects and failure data (involved into the model via application of Bayesian method). The proposed approach is applied to estimate the failure probability of a selected part of the Lithuanian natural gas transmission network. The presented approach for the estimation of integrated failure probability is a combination of several different analyses allowing us to obtain: the critical crack's length and depth, the failure probability of the defected zone thickness, dependency of the failure probability on the age of the natural gas transmission pipeline. A model's uncertainty analysis and uncertainty propagation analysis are performed, as well. - Highlights: • Degradation mechanisms of natural gas transmission pipelines. • Fracture mechanic analysis of the pipe with crack. • Stress evaluation of the pipe with critical crack. • Deterministic-probabilistic structural integrity analysis of gas pipeline. • Integrated estimation of pipeline failure probability by Bayesian method.

Preliminary failure mode and effect analysis

International Nuclear Information System (INIS)

Addison, J.V.

1972-01-01

A preliminary Failure Mode and Effect Analysis (FMEA) was made on the overall 5 Kwe system. A general discussion of the system and failure effect is given in addition to the tabulated FMEA and a primary block diagram of the system. (U.S.)

X-framework: Space system failure analysis framework

Science.gov (United States)

Newman, John Steven

Space program and space systems failures result in financial losses in the multi-hundred million dollar range every year. In addition to financial loss, space system failures may also represent the loss of opportunity, loss of critical scientific, commercial and/or national defense capabilities, as well as loss of public confidence. The need exists to improve learning and expand the scope of lessons documented and offered to the space industry project team. One of the barriers to incorporating lessons learned include the way in which space system failures are documented. Multiple classes of space system failure information are identified, ranging from "sound bite" summaries in space insurance compendia, to articles in journals, lengthy data-oriented (what happened) reports, and in some rare cases, reports that treat not only the what, but also the why. In addition there are periodically published "corporate crisis" reports, typically issued after multiple or highly visible failures that explore management roles in the failure, often within a politically oriented context. Given the general lack of consistency, it is clear that a good multi-level space system/program failure framework with analytical and predictive capability is needed. This research effort set out to develop such a model. The X-Framework (x-fw) is proposed as an innovative forensic failure analysis approach, providing a multi-level understanding of the space system failure event beginning with the proximate cause, extending to the directly related work or operational processes and upward through successive management layers. The x-fw focus is on capability and control at the process level and examines: (1) management accountability and control, (2) resource and requirement allocation, and (3) planning, analysis, and risk management at each level of management. The x-fw model provides an innovative failure analysis approach for acquiring a multi-level perspective, direct and indirect causation of

Importance analysis for the systems with common cause failures

International Nuclear Information System (INIS)

Pan Zhijie; Nonaka, Yasuo

1995-01-01

This paper extends the importance analysis technique to the research field of common cause failures to evaluate the structure importance, probability importance, and β-importance for the systems with common cause failures. These importance measures would help reliability analysts to limit the common cause failure analysis framework and find efficient defence strategies against common cause failures

The demonstration of gall stones by sonography and radiography

International Nuclear Information System (INIS)

Gladisch, R.; Deininger, H.K.; Staedtische Kliniken Darmstadt

1983-01-01

Eighty-seven unselected gall stones were examined radiologically and by ultrasound in vitro. No relationship of diagnostic value could be established between the amount of calcification and stone demonstration, the sonogram being influenced by the size of the stone, its surface contour and its position in the ultrasound beam. Sonography is therefore not suitable for selecting those patients on whom litholysis could be carried out. Sonography appears to be useful only in a negative way by establishing the exact size of the concretion. (orig.) [de

Goal-oriented failure analysis - a systems analysis approach to hazard identification

International Nuclear Information System (INIS)

Reeves, A.B.; Davies, J.; Foster, J.; Wells, G.L.

1990-01-01

Goal-Oriented Failure Analysis, GOFA, is a methodology which is being developed to identify and analyse the potential failure modes of a hazardous plant or process. The technique will adopt a structured top-down approach, with a particular failure goal being systematically analysed. A systems analysis approach is used, with the analysis being organised around a systems diagram of the plant or process under study. GOFA will also use checklists to supplement the analysis -these checklists will be prepared in advance of a group session and will help to guide the analysis and avoid unnecessary time being spent on identifying obvious failure modes or failing to identify certain hazards or failures. GOFA is being developed with the aim of providing a hazard identification methodology which is more efficient and stimulating than the conventional approach to HAZOP. The top-down approach should ensure that the analysis is more focused and the use of a systems diagram will help to pull the analysis together at an early stage whilst also helping to structure the sessions in a more stimulating way than the conventional techniques. GOFA will be, essentially, an extension of the HAZOP methodology. GOFA is currently being computerised using a knowledge-based systems approach for implementation. The Goldworks II expert systems development tool is being used. (author)

Spontaneous Perforation of Common Bile Duct: A Rare Presentation of Gall Stones Disease

Directory of Open Access Journals (Sweden)

Duminda Subasinghe

2016-01-01

Full Text Available Background. Spontaneous perforation of the extrahepatic biliary system is a rare presentation of gall stones. Very few cases of bile duct perforation have been reported in adults. It is rarely suspected or correctly diagnosed preoperatively. Case Presentation. A 66-year-old female presented at the surgical emergency with 3 days’ history of severe upper abdominal pain with distension and repeated episodes of vomiting, as she had evidence of generalized peritonitis and underwent an exploratory laparotomy. A single 0.5 cm × 0.5 cm free perforation was present on the anterolateral surface of the common bile duct at the junction of cystic duct. A cholecystectomy and the CBD exploration were performed. Conclusion. Spontaneous perforation of the extrahepatic bile duct is a rare but important presentation of gall stones in adults. Therefore, awareness of the clinical presentation, expert ultrasound examination, and surgery are important aspects in the management.

Improved methods for dependent failure analysis in PSA

International Nuclear Information System (INIS)

Ballard, G.M.; Games, A.M.

1988-01-01

The basic design principle used in ensuring the safe operation of nuclear power plant is defence in depth. This normally takes the form of redundant equipment and systems which provide protection even if a number of equipment failures occur. Such redundancy is particularly effective in ensuring that multiple, independent equipment failures with the potential for jeopardising reactor safety will be rare events. However the achievement of high reliability has served to highlight the potentially dominant role of multiple, dependent failures of equipment and systems. Analysis of reactor operating experience has shown that dependent failure events are the major contributors to safety system failures and reactor incidents and accidents. In parallel PSA studies have shown that the results of a safety analysis are sensitive to assumptions made about the dependent failure (CCF) probability for safety systems. Thus a Westinghouse Analysis showed that increasing system dependent failure probabilities by a factor of 5 led to a factor 4 increase in core. This paper particularly refers to the engineering concepts underlying dependent failure assessment touching briefly on aspects of data. It is specifically not the intent of our work to develop a new mathematical model of CCF but to aid the use of existing models

Diversity of galling insects in Styrax pohlii (Styracaceae: edge effect and use as bioindicators

Directory of Open Access Journals (Sweden)

Walter Santos de Araújo

2011-12-01

Full Text Available Impacts of forest fragmentation and edge effect on plant-herbivores interactions are relatively unknown, and the relationships between galling insects and their host plants are very susceptible to environmental variations. The goal of our study was to test the edge effect hypothesis for galling insects associated with Styrax pohlii (Styracaceae host plant. Samplings were conducted at a fragment of semi-deciduous forest in Goiânia, Goiás, Brazil. Thirty host plant individuals (15 at fragment edge and 15 in its interior were sampled in July of 2007; in each plant, 10 apical branches were collected at the top, middle and bottom crown levels. Our results supported the prediction of greater richness of gall morphotypes in the edge habitat compared with remnant interior. In a similar way, gall abundance and frequency of attacked leaves were also greater in the fragment edge. These findings consequently suggest a positive response of galling insect diversity to edge effect; in the Saint-Hilaire forest, this effect probably operates through the changes in microclimatic conditions of edge habitats, which results in an increased hygrothermal stress, a determinant factor to distribution patterns of galling insects. We also concluded that these organisms could be employed as biological indicators (i because of their host-specificity, (ii they are sensitive to changes in plant quality, and (iii present dissimilar and specific responses to local variation in habitat conditions. Rev. Biol. Trop. 59 (4: 1589-1597. Epub 2011 December 01.Los impactos de la fragmentación de los bosques y el efecto de borde sobre las interacciones planta-herbívoros son relativamente desconocidos, y las relaciones entre los insectos inductores de agallas y sus plantas hospederas son muy susceptibles a las variaciones ambientales. El objetivo de nuestro estudio fue probar la hipótesis de efecto de borde en los insectos inductores de agallas asociados con la planta hospedera

Contrast media in gall bladder diagnostics

International Nuclear Information System (INIS)

Schindler, G.; Frommhold, W.

1982-01-01

The justification of conventional X-ray diagnostic of bile ducts is repeatedly questioned by newer examination techniques like sonography and ERC. The indication for oral cholesgraphy is derived from its high-specifity of its statements for gall bladder diagnostic, that is as high as with sonography and does not depend on the experience of the investigator. The importance of the the void exposure is undoubted with correspondence of medicamentary litholysis for calcite identification. Furthermore, Choleocystic kineticals like Ceruletid let recognize better hyper plastic choleocysts like adenomyomatoses. The intravenous choleocyst-cholangiography posesses a clearly limited indication scheme even after introduction of sonography and ERC. The infusion method yields a better compatibility of the contrast medium with a simultaneous increased representation quality of the bile duct, that can be increased by a consequent application of the layer exposure technique. (orig.) [de

Can sonography define the chemical composition of gall stones

International Nuclear Information System (INIS)

Frentzel-Beyme, B.; Faehndrich, R.; Arnan-Thiele, B.

1983-01-01

Eight sonographic patterns caused by gall stones are described. In an attempt to explain these different appearances, 62 stones were analysed chemically and physically. The chemical composition of the stones did not correlate with their sonographic pattern. Cholesterol stones cannot be recognised as such by sonography. The formation of an acoustic shadow depends largely on the position of the stone within the acoustic beam. It therefore follows that the examination must be done by keeping the focal plane of the transducer in proper relationship to the stone. (orig.) [de

New genera and species of gall midges (Diptera, Cecidomyiidae from three restingas of Rio de Janeiro State, Brazil

Directory of Open Access Journals (Sweden)

Valéria Cid Maia

2001-07-01

Full Text Available Five new genera and fourteen new species of gall midges from restingas of Rio de Janeiro State are described. The larva, pupa, male, female and gall are described for each species. The new genera are: Arrabidaeamyia, Epihormomyia, Manilkaramyia, Mayteniella and Parazalepidota. The new species are: Arrabidaeamyia serrata, Asphondylia peploniae, Clinodiplosis diodiae, Clinodiplosis profusa, Clusiamyia granulosa, Dasineura couepiae, Epihormomyia miconiae, Lopesia grandis, Lopesia marginalis, Lopesia singularis, Manilkaramyia notabilis, Mayteniella distincta, Parazalepidota clusiae and Paulliniamyia ampla. Also, the larva of a previously described species, Clusiamyia nitida Maia, 1996 is described and Asphondylia byrsonimae Maia & Couri is transferred to Bruggmaniella.

An extended chemical analysis of gallstone

OpenAIRE

Chandran, P.; Kuchhal, N. K.; Garg, P.; Pundir, C. S.

2007-01-01

Chemical composition of gall stones is essential for aetiopathogensis of gallstone disease. We have reported quantitative chemical analysis of total cholesterol bilirubin, calcium, iron and inorganic phosphate in 120 gallstones from haryana. To extend this chemical analysis of gall stones by studying more cases and by analyzing more chemical constituents. A quantitative chemical analysis of total cholesterol, total bilirubin, fatty acids, triglycerides, phospholipids, bile acids, soluble prot...

Understory host plant and insect gall diversity changes across topographic habitats differing in nutrient and water stress in the Brazilian Amazon rainforest

OpenAIRE

JULIÃO, Genimar Rebouças; ALMADA, Emmanuel Duarte; COSTA, Flávia Regina Capellotto; CARNEIRO, Marco Antônio Alves; FERNANDES, G. Wilson

2017-01-01

ABSTRACT Topographic gradients in terra firme forests are associated with pronounced changes in soil texture, soil nutrients and distance to the water-table, thereby creating different hydric and nutritional conditions for plants and their associated herbivore community. The aim of this study was to investigate galling species and host plant richness and gall species composition across topographic habitats differing in nutrient and water stress in the Brazilian Amazon rainforest. Nineteen 250...

Lessons learned from failure analysis

International Nuclear Information System (INIS)

Le May, I.

2006-01-01

Failure analysis can be a very useful tool to designers and operators of plant and equipment. It is not simply something that is done for lawyers and insurance companies, but is a tool from which lessons can be learned and by means of which the 'breed' can be improved. In this presentation, several failure investigations that have contributed to understanding will be presented. Specifically, the following cases will be discussed: 1) A fire at a refinery that occurred in a desulphurization unit. 2) The failure of a pipeline before it was even put into operation. 3) Failures in locomotive axles that took place during winter operation. The refinery fire was initially blamed on defective Type 321 seamless stainless steel tubing, but there were conflicting views between 'experts' involved as to the mechanism of failure and the writer was called upon to make an in-depth study. This showed that there were a variety of failure mechanism involved, including high temperature fracture, environmentally-induced cracking and possible manufacturing defects. The unraveling of the failure sequence is described and illustrated. The failure of an oil transmission was discovered when the line was pressure tested some months after it had been installed and before it was put into service. Repairs were made and failure occurred in another place upon the next pressure test being conducted. After several more repairs had been made the line was abandoned and a lawsuit was commenced on the basis that the steel was defective. An investigation disclosed that the material was sensitive to embrittlement and the causes of this were determined. As a result, changes were made in the microstructural control of the product to avoid similar problems in future. A series of axle failures occurred in diesel electric locomotives during winter. An investigation was made to determine the nature of the failures which were not by classical fatigue, nor did they correspond to published illustrations of Cu

Failure analysis for WWER-fuel elements

International Nuclear Information System (INIS)

Boehmert, J.; Huettig, W.

1986-10-01

If the fuel defect rate proves significantly high, failure analysis has to be performed in order to trace down the defect causes, to implement corrective actions, and to take measures of failure prevention. Such analyses are work-consuming and very skill-demanding technical tasks, which require examination methods and devices excellently developed and a rich stock of experience in evaluation of features of damage. For that this work specifies the procedure of failure analyses in detail. Moreover prerequisites and experimental equipment for the investigation of WWER-type fuel elements are described. (author)

failure analysis of a uav flight control system using markov analysis

African Journals Online (AJOL)

Failure analysis of a flight control system proposed for Air Force Institute of Technology (AFIT) Unmanned Aerial Vehicle (UAV) was studied using Markov Analysis (MA). It was perceived that understanding of the number of failure states and the probability of being in those state are of paramount importance in order to ...

Difficulties in laparoscopic cholecystectomy: conversion versus surgeon's failure

International Nuclear Information System (INIS)

Ali, A.; Saeed, S.; Khawaja, R.; Samnani, S.S

2017-01-01

Laparoscopic cholecystectomy is considered to be gold standard treatment for symptomatic gall stones. Despite several benefits there are still disadvantages of laparoscopic cholecystectomy in difficult cases where anatomy is disturbed even in experienced hand. Aim of this study is to identify advantages of early conversion to open cholecystectomy in difficult cases and how it should not be associated with surgeon's failure. Methods: Observational study was conducted at tertiary care hospital of Karachi, Pakistan from January 2012 till June 2015. All patients who presented to general surgery department with symptomatic gall stones and planned for laparoscopic cholecystectomy was included in the study. Demographic data was collected. Preoperative workup includes baselines investigations with liver profile test and imaging study (ultrasound scan). All patient underwent laparoscopic cholecystectomy at first. Operative difficulties, incidence of conversion, reason for conversion and complication intra-operative or postoperative were recorded. Data was analyzed using SPSS 20. Results: Out of 1026 patients, 78.26 percent (803) were female. Mean age of patients were 41.30+-8.43 years (range 26-68 years). Common presenting symptoms were pain at upper abdomen and dyspepsia. Most of the patients had multiple gall stones (93.85 percent). Nine hundred and ninety-two patients (96.68 percent) of patients underwent successful laparoscopic cholecystectomy. This includes patients in whom dissections were difficult because of disturbed anatomy of calots triangle. Only 3.13 percent of patients were converted to open cholecystectomy. There was a significant difference (<0.05) in complications observed between completed and converted cholecystectomies. Conclusion: Conversion from laparoscopic to open procedure should be done in cases of technically difficult situations to avoid significant mortality and morbidity. Surgeons experience had a pivotal role in determining its need and

Resistance to Root Galling Caused by the Powdery Scab Pathogen Spongospora subterranea in Potato

Science.gov (United States)

Potato selections (clones and commercial cultivars) were examined for resistance to root galling, caused by the powdery scab pathogen Spongospora subterranea in 7 field trials conducted between 2003 and 2007 in the states of Washington (WA) and Idaho (ID). In 2003, Shepody demonstrated the highest l...

The authority and types for the hackberry gall psyllid genus Pachypsylla (Riley) (Hemiptera-Homoptera: Psyllidae)

Science.gov (United States)

The nomenclatural problems with the hackberry gall psyllid species names are rectified. The genus Pachypsylla Riley, 1883, type species, Psylla venusta Osten-Sacken, includes 14 nominal species. These are: Pachypsylla venusta (Osten-Sacken, 1861); P. celtidismamma Riley, 1875; P. celtidisgemma Ri...

Failure analysis of prestressed concrete beam under impact loading

International Nuclear Information System (INIS)

Ishikawa, N.; Sonoda, Y.; Kobayashi, N.

1993-01-01

This paper presents a failure analysis of prestressed concrete (PC) beam under impact loading. At first, the failure analysis of PC beam section is performed by using the discrete section element method in order to obtain the dynamic bending moment-curvature relation. Secondary, the failure analysis of PC beam is performed by using the rigid panel-spring model. Finally, the numerical calculation is executed and is compared with the experimental results. It is found that this approach can simulate well the experiments at the local and overall failure of the PC beam as well as the impact load and the displacement-time relations. (author)

Micromechanics Based Failure Analysis of Heterogeneous Materials

Science.gov (United States)

Sertse, Hamsasew M.

are performed for both brittle failure/high cycle fatigue (HCF) for negligible plastic strain and ductile failure/low cycle fatigue (LCF) for large plastic strain. The proposed approach is incorporated in SwiftComp and used to predict the initial failure envelope, stress-strain curve for various loading conditions, and fatigue life of heterogeneous materials. The combined effects of strain hardening and progressive fatigue damage on the effective properties of heterogeneous materials are also studied. The capability of the current approach is validated using several representative examples of heterogeneous materials including binary composites, continuous fiber-reinforced composites, particle-reinforced composites, discontinuous fiber-reinforced composites, and woven composites. The predictions of MSG are also compared with the predictions obtained using various micromechanics approaches such as Generalized Methods of Cells (GMC), Mori-Tanaka (MT), and Double Inclusions (DI) and Representative Volume Element (RVE) Analysis (called as 3-dimensional finite element analysis (3D FEA) in this document). This study demonstrates that a micromechanics based failure analysis has a great potential to rigorously and more accurately analyze initiation and progression of damage in heterogeneous materials. However, this approach requires material properties specific to damage analysis, which are needed to be independently calibrated for each constituent.

New Genus and Species of Gall Midges (Diptera, Cecidomyiidae, Porricondylinae, Holoneurini from the Late Eocene Amber of Olevsk (Zhitomir Region, Ukraine

Directory of Open Access Journals (Sweden)

Fedotova Z. A.

2017-02-01

Full Text Available Gall midges are reported for the first time in Late Eocene Rovno amber from the Olevsk, Zhitomir Region. This is the second amber locality to yield gall midges in the Zhitomir Region, after Gulyanka. Rovnoholoneurus gen. n. and two new species, Rovnoholoneurus davidi sp. n. and R. miyae sp. n. are described. Bryocrypta laqueata Fedotova, 2005 is transferred to the genus Rovnoholoneurus, and Rovnoholoneurus laqueatus (Fedotova, 2005, comb. n. is established. A key to the species of Rovnoholoneurus is provided.

Sex-mediated herbivory by galling insects on Baccharis concinna (Asteraceae Herbivoria por insetos galhadores mediada pelo sexo em Baccharis concinna (Asteraceae

Directory of Open Access Journals (Sweden)

Marco Antonio A. Carneiro

2006-09-01

Full Text Available The interaction patterns between the dioecious shrub Baccharis concinna Barroso (Asteraceae and its speciose galling insect community were studied in southeastern Brazil. Two hypotheses were tested in this study: "the differential reproduction and growth hypothesis" that predicts that male plants present fewer reproductive structures and are larger than female plants; and the 'sex-biased herbivory hypothesis' that predicts that male plants support a larger abundance of insect galls than female plants. Plants did not show sexual dimorphism in growth (= mean leaf number. However, male plants had longer shoots and a lower average number of inflorescences than female plants. These results corroborate the hypothesis that male plants grow more and reproduce less than female plants. No statistically significant difference was found in the number of galls between male and female plants, but a sex by environmental effect on gall number was detected. When each species of galling insect was individually analyzed per population of the host plant, the rates of attack varied between sex and population of the host plant, and they were highly variable among the species of galling insects. These results highlight the importance of the interaction between sex and environment in the community structure of galling insects and indicate that other variables besides host sex may influence the patterns of attack by galling herbivores.Os padrões de interação entre o arbusto dióico Baccharis concinna Barroso (Asteraceae e sua diversa comunidade de insetos galhadores foram estudados na região sudeste do Brasil. Duas hipóteses foram testadas neste estudo: "a hipótese do crescimento e reprodução diferenciais", que prevê que plantas masculinas apresentam menos estruturas reprodutivas e são maiores do que plantas femininas; e a "hipótese da herbivoria mediada pelo sexo" que prevê que plantas masculinas sustentam uma maior abundância de insetos galhadores do que

Debugging Nondeterministic Failures in Linux Programs through Replay Analysis

Directory of Open Access Journals (Sweden)

Shakaiba Majeed

2018-01-01

Full Text Available Reproducing a failure is the first and most important step in debugging because it enables us to understand the failure and track down its source. However, many programs are susceptible to nondeterministic failures that are hard to reproduce, which makes debugging extremely difficult. We first address the reproducibility problem by proposing an OS-level replay system for a uniprocessor environment that can capture and replay nondeterministic events needed to reproduce a failure in Linux interactive and event-based programs. We then present an analysis method, called replay analysis, based on the proposed record and replay system to diagnose concurrency bugs in such programs. The replay analysis method uses a combination of static analysis, dynamic tracing during replay, and delta debugging to identify failure-inducing memory access patterns that lead to concurrency failure. The experimental results show that the presented record and replay system has low-recording overhead and hence can be safely used in production systems to catch rarely occurring bugs. We also present few concurrency bug case studies from real-world applications to prove the effectiveness of the proposed bug diagnosis framework.

Celticecis, a Genus of Gall Midges (Diptera: Cecidomyiidae), Newly Reported for the Western Palearctic Region

Science.gov (United States)

Raymond J. Gagné; John C. Moser

1997-01-01

Many Holarctic genera of trees and shrubs are host over much of their ranges to particular genera of Cecidomyiidae. As examples, willows host gall midges of Rabdophaga and Iteomyia, oaks host Macrodiplosis and Polystepha, and birches host Semudobia in both the Nearctic and...

Failure Modes and Effects Analysis (FMEA): A Bibliography

Science.gov (United States)

2000-01-01

Failure modes and effects analysis (FMEA) is a bottom-up analytical process that identifies process hazards, which helps managers understand vulnerabilities of systems, as well as assess and mitigate risk. It is one of several engineering tools and techniques available to program and project managers aimed at increasing the likelihood of safe and successful NASA programs and missions. This bibliography references 465 documents in the NASA STI Database that contain the major concepts, failure modes or failure analysis, in either the basic index of the major subject terms.

BACFIRE, Minimal Cut Sets Common Cause Failure Fault Tree Analysis

International Nuclear Information System (INIS)

Fussell, J.B.

1983-01-01

1 - Description of problem or function: BACFIRE, designed to aid in common cause failure analysis, searches among the basic events of a minimal cut set of the system logic model for common potential causes of failure. The potential cause of failure is called a qualitative failure characteristics. The algorithm searches qualitative failure characteristics (that are part of the program input) of the basic events contained in a set to find those characteristics common to all basic events. This search is repeated for all cut sets input to the program. Common cause failure analysis is thereby performed without inclusion of secondary failure in the system logic model. By using BACFIRE, a common cause failure analysis can be added to an existing system safety and reliability analysis. 2 - Method of solution: BACFIRE searches the qualitative failure characteristics of the basic events contained in the fault tree minimal cut set to find those characteristics common to all basic events by either of two criteria. The first criterion can be met if all the basic events in a minimal cut set are associated by a condition which alone may increase the probability of multiple component malfunction. The second criterion is met if all the basic events in a minimal cut set are susceptible to the same secondary failure cause and are located in the same domain for that cause of secondary failure. 3 - Restrictions on the complexity of the problem - Maxima of: 1001 secondary failure maps, 101 basic events, 10 cut sets

Failure analysis of vise jaw holders for hacksaw machine

Directory of Open Access Journals (Sweden)

Essam Ali Al-Bahkali

2018-01-01

Full Text Available Failure analysis in mechanical components has been investigated in many studies in the last few years. Failure analysis and prevention are important functions in all engineering disciplines. Materials engineers are often the lead role in the analysis of failures, where a component or product fails in service or if a failure occurs during manufacturing or production processing. In any case, one must determine the cause of the failure to prevent future occurrences and/or to improve the performance of the device, component or structure. For example, the vise jaw holders of hacksaws can break due to accidental heavy loads or machine misuse. The parts that break are the stationary and movable vise jaw holders and the connecter power screw between the holders. To investigate the failure of these components, a three-dimensional finite element model for stress analysis was performed. First, the analysis identified the broken components of the hacksaw machine. In addition, the type of materials of the broken parts was identified, a CAD model was built, and the hacksaw mechanism was analyzed to determine the accurate applied loads on the broken parts. After analyzing the model using Abaqus CAE software, the results showed that the location of the high stresses was identical with the high-stress locations in the original, broken parts. Furthermore, the power screw was subjected to a high load, which deformed the power screw. Also, the stationary vise jaw holder was broken by impact because it was not touched by the power screw until the movable vise jaw holder broke. A conclusion is drawn from the failure analysis and a way to improve the design of the broken parts is suggested.

Failure Propagation Modeling and Analysis via System Interfaces

Directory of Open Access Journals (Sweden)

Lin Zhao

2016-01-01

Full Text Available Safety-critical systems must be shown to be acceptably safe to deploy and use in their operational environment. One of the key concerns of developing safety-critical systems is to understand how the system behaves in the presence of failures, regardless of whether that failure is triggered by the external environment or caused by internal errors. Safety assessment at the early stages of system development involves analysis of potential failures and their consequences. Increasingly, for complex systems, model-based safety assessment is becoming more widely used. In this paper we propose an approach for safety analysis based on system interface models. By extending interaction models on the system interface level with failure modes as well as relevant portions of the physical system to be controlled, automated support could be provided for much of the failure analysis. We focus on fault modeling and on how to compute minimal cut sets. Particularly, we explore state space reconstruction strategy and bounded searching technique to reduce the number of states that need to be analyzed, which remarkably improves the efficiency of cut sets searching algorithm.

Two new herb gall wasps from Spain, including the description of a new species of Aulacidea Ashmead, 1897 (Hymenoptera, Cynipidae, “Aylacini” inducing galls on Serratula nudicaulis L. DC (Asteraceae

Directory of Open Access Journals (Sweden)

Nieves-Aldrey, J. L.

2012-12-01

Full Text Available Two new species of herb gall wasps are recorded from Spain, which induce galls on flower heads of Serratula nudicaulis L. DC (Asteraceae. Isocolus serratulae (Mayr, 1882 is recorded for the first time in Spain, while a new species of Aulacidea Ashmead, 1897, Aulacidea pilarae sp. n., is described. This new species is similar to Aulacidea serratulae Diakontschuk, 1984, which is found throughout Oriental Europe. However, those two congeneric species may be distinguished by the morphology of the adults.Se citan dos nuevas especies de avispas de las agallas en plantas herbáceas para España. Las dos especies inducen agallas en cabezuelas florales de Serratula nudicaulis L. DC (Asteraceae y se han encontrado en el valle del Lozoya (Madrid, España Central. Isocolus serratulae (Mayr, 1882 se cita por primera vez para la Península Ibérica y se describe una especie nueva de Aulacidea Ashmead, 1897: A. pilarae sp. n. La nueva especie es similar a Aulacidea serratulae Diakontschuk, 1984 citada de Europa oriental, diferenciándose por la morfología de los adultos.

Gall inducing arthropods from a seasonally dry tropical forest in Serra do Cipó, Brazil Artrópodes indutores de galhas em Floresta Sazonal Tropical Seca da Serra do Cipó, Brasil

Directory of Open Access Journals (Sweden)

Marcel Serra Coelho

2009-01-01

Full Text Available Highly diverse forms of galling arthropods can be identified in much of southeastern Brazil's vegetation. Three fragments of a Seasonally Dry Tropical Forest (SDTF located in the southern range of the Espinhaço Mountains were selected for study in the first survey of galling organisms in such tropical vegetation. Investigators found 92 distinct gall morphotypes on several organs of 51 host plant species of 19 families. Cecidomyiidae (Diptera was the most prolific gall-inducing species, responsible for the largest proportion of galls (77% observed. Leaves were the most frequently galled plant organ (63%, while the most common gall morphotype was of a spherical shape (30%. The two plant species, Baccharis dracunculifolia (Asteraceae and Celtis brasiliensis (Cannabaceae, presented the highest number of gall morphtypes, displaying an average of 5 gall morphotypes each. This is the first study of gall-inducing arthropods and their host plant species ever undertaken in a Brazilian SDTF ecosystem. Given the intense human pressure on SDTFs, the high richness of galling arthropods, and implied floral host diversity found in this study indicates the need for an increased effort to catalogue the corresponding flora and fauna, observe their intricate associations and further understand the implications of such rich diversity in these stressed and vulnerable ecosystems.Artrópodes indutores de galhas são muito ricos em espécies nas formações vegetais no sudeste do Brasil. Três fragmentos de Floresta Sazonal Tropical Seca (FSTS foram selecionados nas montanhas do sudeste da cadeia do Espinhaço para a primeira pesquisa de organismos indutores de galhas nesse tipo de vegetação. Encontramos 92 morfotipos distintos de galhas em vários órgãos de 51 espécies de plantas hospedeiras pertencentes à 19 famílias. A maioria das galhas (77% foi induzida pela família Cecidomyiidae (Diptera. A folha foi o órgão mais atacado (63%, enquanto o morfotipo mais

Use of fuel failure correlations in accident analysis

International Nuclear Information System (INIS)

O'Dell, L.D.; Baars, R.E.; Waltar, A.E.

1975-05-01

The MELT-III code for analysis of a Transient Overpower (TOP) accident in an LMFBR is briefly described, including failure criteria currently applied in the code. Preliminary results of calculations exploring failure patterns in time and space in the reactor core are reported and compared for the two empirical fuel failure correlations employed in the code. (U.S.)

Light water reactor lower head failure analysis

International Nuclear Information System (INIS)

Rempe, J.L.; Chavez, S.A.; Thinnes, G.L.

1993-10-01

This document presents the results from a US Nuclear Regulatory Commission-sponsored research program to investigate the mode and timing of vessel lower head failure. Major objectives of the analysis were to identify plausible failure mechanisms and to develop a method for determining which failure mode would occur first in different light water reactor designs and accident conditions. Failure mechanisms, such as tube ejection, tube rupture, global vessel failure, and localized vessel creep rupture, were studied. Newly developed models and existing models were applied to predict which failure mechanism would occur first in various severe accident scenarios. So that a broader range of conditions could be considered simultaneously, calculations relied heavily on models with closed-form or simplified numerical solution techniques. Finite element techniques-were employed for analytical model verification and examining more detailed phenomena. High-temperature creep and tensile data were obtained for predicting vessel and penetration structural response

Light water reactor lower head failure analysis

Energy Technology Data Exchange (ETDEWEB)

Rempe, J.L.; Chavez, S.A.; Thinnes, G.L. [EG and G Idaho, Inc., Idaho Falls, ID (United States)] [and others

1993-10-01

This document presents the results from a US Nuclear Regulatory Commission-sponsored research program to investigate the mode and timing of vessel lower head failure. Major objectives of the analysis were to identify plausible failure mechanisms and to develop a method for determining which failure mode would occur first in different light water reactor designs and accident conditions. Failure mechanisms, such as tube ejection, tube rupture, global vessel failure, and localized vessel creep rupture, were studied. Newly developed models and existing models were applied to predict which failure mechanism would occur first in various severe accident scenarios. So that a broader range of conditions could be considered simultaneously, calculations relied heavily on models with closed-form or simplified numerical solution techniques. Finite element techniques-were employed for analytical model verification and examining more detailed phenomena. High-temperature creep and tensile data were obtained for predicting vessel and penetration structural response.

Two new species of gall midges (Diptera, Cecidomyiidae) associated with Erythroxylum ovalifolium Peyr. (Erythroxylaceae) from the Barra de Maricá restinga, Maricá, Rio de Janeiro, Brazil.

Science.gov (United States)

Maia, V C; Fernandes, S P C

2011-05-01

Two new species of gall midges (Diptera, Cecidomyiidae) Dasineura ovalifoliae and Clinodiplosis maricaensis are described based on material from the Barra de Maricá restinga, Maricá, Rio de Janeiro, Brazil. Both species are associated with Erythroxylum ovalifolium Peyr. (Erythroxylaceae). The former is the gall inducer and the latter an inquiline.

A streamlined failure mode and effects analysis

International Nuclear Information System (INIS)

Ford, Eric C.; Smith, Koren; Terezakis, Stephanie; Croog, Victoria; Gollamudi, Smitha; Gage, Irene; Keck, Jordie; DeWeese, Theodore; Sibley, Greg

2014-01-01

Purpose: Explore the feasibility and impact of a streamlined failure mode and effects analysis (FMEA) using a structured process that is designed to minimize staff effort. Methods: FMEA for the external beam process was conducted at an affiliate radiation oncology center that treats approximately 60 patients per day. A structured FMEA process was developed which included clearly defined roles and goals for each phase. A core group of seven people was identified and a facilitator was chosen to lead the effort. Failure modes were identified and scored according to the FMEA formalism. A risk priority number,RPN, was calculated and used to rank failure modes. Failure modes with RPN > 150 received safety improvement interventions. Staff effort was carefully tracked throughout the project. Results: Fifty-two failure modes were identified, 22 collected during meetings, and 30 from take-home worksheets. The four top-ranked failure modes were: delay in film check, missing pacemaker protocol/consent, critical structures not contoured, and pregnant patient simulated without the team's knowledge of the pregnancy. These four failure modes hadRPN > 150 and received safety interventions. The FMEA was completed in one month in four 1-h meetings. A total of 55 staff hours were required and, additionally, 20 h by the facilitator. Conclusions: Streamlined FMEA provides a means of accomplishing a relatively large-scale analysis with modest effort. One potential value of FMEA is that it potentially provides a means of measuring the impact of quality improvement efforts through a reduction in risk scores. Future study of this possibility is needed

A streamlined failure mode and effects analysis.

Science.gov (United States)

Ford, Eric C; Smith, Koren; Terezakis, Stephanie; Croog, Victoria; Gollamudi, Smitha; Gage, Irene; Keck, Jordie; DeWeese, Theodore; Sibley, Greg

2014-06-01

Explore the feasibility and impact of a streamlined failure mode and effects analysis (FMEA) using a structured process that is designed to minimize staff effort. FMEA for the external beam process was conducted at an affiliate radiation oncology center that treats approximately 60 patients per day. A structured FMEA process was developed which included clearly defined roles and goals for each phase. A core group of seven people was identified and a facilitator was chosen to lead the effort. Failure modes were identified and scored according to the FMEA formalism. A risk priority number,RPN, was calculated and used to rank failure modes. Failure modes with RPN > 150 received safety improvement interventions. Staff effort was carefully tracked throughout the project. Fifty-two failure modes were identified, 22 collected during meetings, and 30 from take-home worksheets. The four top-ranked failure modes were: delay in film check, missing pacemaker protocol/consent, critical structures not contoured, and pregnant patient simulated without the team's knowledge of the pregnancy. These four failure modes had RPN > 150 and received safety interventions. The FMEA was completed in one month in four 1-h meetings. A total of 55 staff hours were required and, additionally, 20 h by the facilitator. Streamlined FMEA provides a means of accomplishing a relatively large-scale analysis with modest effort. One potential value of FMEA is that it potentially provides a means of measuring the impact of quality improvement efforts through a reduction in risk scores. Future study of this possibility is needed.

A streamlined failure mode and effects analysis

Energy Technology Data Exchange (ETDEWEB)

Ford, Eric C., E-mail: eford@uw.edu; Smith, Koren; Terezakis, Stephanie; Croog, Victoria; Gollamudi, Smitha; Gage, Irene; Keck, Jordie; DeWeese, Theodore; Sibley, Greg [Department of Radiation Oncology and Molecular Radiation Sciences, Johns Hopkins University, Baltimore, MD 21287 (United States)

2014-06-15

Purpose: Explore the feasibility and impact of a streamlined failure mode and effects analysis (FMEA) using a structured process that is designed to minimize staff effort. Methods: FMEA for the external beam process was conducted at an affiliate radiation oncology center that treats approximately 60 patients per day. A structured FMEA process was developed which included clearly defined roles and goals for each phase. A core group of seven people was identified and a facilitator was chosen to lead the effort. Failure modes were identified and scored according to the FMEA formalism. A risk priority number,RPN, was calculated and used to rank failure modes. Failure modes with RPN > 150 received safety improvement interventions. Staff effort was carefully tracked throughout the project. Results: Fifty-two failure modes were identified, 22 collected during meetings, and 30 from take-home worksheets. The four top-ranked failure modes were: delay in film check, missing pacemaker protocol/consent, critical structures not contoured, and pregnant patient simulated without the team's knowledge of the pregnancy. These four failure modes hadRPN > 150 and received safety interventions. The FMEA was completed in one month in four 1-h meetings. A total of 55 staff hours were required and, additionally, 20 h by the facilitator. Conclusions: Streamlined FMEA provides a means of accomplishing a relatively large-scale analysis with modest effort. One potential value of FMEA is that it potentially provides a means of measuring the impact of quality improvement efforts through a reduction in risk scores. Future study of this possibility is needed.

Risk analysis of geothermal power plants using Failure Modes and Effects Analysis (FMEA) technique

International Nuclear Information System (INIS)

Feili, Hamid Reza; Akar, Navid; Lotfizadeh, Hossein; Bairampour, Mohammad; Nasiri, Sina

2013-01-01

Highlights: • Using Failure Modes and Effects Analysis (FMEA) to find potential failures in geothermal power plants. • We considered 5 major parts of geothermal power plants for risk analysis. • Risk Priority Number (RPN) is calculated for all failure modes. • Corrective actions are recommended to eliminate or decrease the risk of failure modes. - Abstract: Renewable energy plays a key role in the transition toward a low carbon economy and the provision of a secure supply of energy. Geothermal energy is a versatile source as a form of renewable energy that meets popular demand. Since some Geothermal Power Plants (GPPs) face various failures, the requirement of a technique for team engineering to eliminate or decrease potential failures is considerable. Because no specific published record of considering an FMEA applied to GPPs with common failure modes have been found already, in this paper, the utilization of Failure Modes and Effects Analysis (FMEA) as a convenient technique for determining, classifying and analyzing common failures in typical GPPs is considered. As a result, an appropriate risk scoring of occurrence, detection and severity of failure modes and computing the Risk Priority Number (RPN) for detecting high potential failures is achieved. In order to expedite accuracy and ability to analyze the process, XFMEA software is utilized. Moreover, 5 major parts of a GPP is studied to propose a suitable approach for developing GPPs and increasing reliability by recommending corrective actions for each failure mode

Induction of leafy galls in Acacia mearnsii De Wild seedlings infected by Rhodococcus fascians

Directory of Open Access Journals (Sweden)

Marguerite Quoirin

2004-07-01

Full Text Available Plantlets of blackwattle (Acacia mearnsii De Wild were inoculated with the bacterium Rhodococcus fascians and cultured in vitro. Leafy galls appeared at the cotyledonary nodes in 75% of the infected plants. The galls were separated from the plants and cultured on a medium containing three-quarters-strength MS salts (Murashige and Skoog, 1962, MS vitamins, 2% sucrose and an antibiotic (cephalothin, supplemented with or without 0.2% activated charcoal. Histological studies conducted from the sixth to the twenty-second day after plant infection revealed the presence of newly formed meristematic centers, first in the axillary region, then on the petioles and lamina of the leaflets around the apical meristem. Approximately 37% of the galls developed one shoot with both concentrations of cephalothin.Plantas recém germinadas de acácia negra (Acacia mearnsii De Wild. foram inoculadas com a bactéria Rhodococcus fascians e cultivadas in vitro. Galhas cobertas por folhas apareceram na altura do nó cotiledonar em 75% das plantas infectadas. As galhas foram separadas das plantas e cultivadas num meio de cultura contendo os sais do meio MS (Murashige e Skoog, 1962 reduzidos a 3/4, as vitaminas do mesmo meio, 2% de sacarose e um antibiótico (cefalotina, adicionado ou não de 0,2% de carvão ativo. Estudos histológicos realizados entre o sexto e o vigésimo segundo dia depois da inoculação, revelaram a presença de centros meristemáticos novos, primeiro nas regiões axilares, em seguida nos pecíolos e limbos dos folíolos ao redor do meristema apical. Aproximadamente 37% das galhas desenvolveram um broto na presença de cefalotina.

Failure analysis of a helicopter's main rotor bearing

International Nuclear Information System (INIS)

Shahzad, M.; Qureshi, A.H.; Waqas, H.; Hussain, N.; Ali, N.

2011-01-01

Presented results report some of the findings of a detailed failure analysis carried out on a main rotor hub assembly, which had symptoms of burning and mechanical damage. The analysis suggests environmental degradation of the grease which causes pitting on bearing-balls. The consequent inefficient lubrication raises the temperature which leads to the smearing of cage material (brass) on the bearing-balls and ultimately causes the failure. The analysis has been supported by the microstructural studies, thermal analysis and micro-hardness testing performed on the affected main rotor bearing parts. (author)

Failure probability analysis of optical grid

Science.gov (United States)

Zhong, Yaoquan; Guo, Wei; Sun, Weiqiang; Jin, Yaohui; Hu, Weisheng

2008-11-01

Optical grid, the integrated computing environment based on optical network, is expected to be an efficient infrastructure to support advanced data-intensive grid applications. In optical grid, the faults of both computational and network resources are inevitable due to the large scale and high complexity of the system. With the optical network based distributed computing systems extensive applied in the processing of data, the requirement of the application failure probability have been an important indicator of the quality of application and an important aspect the operators consider. This paper will present a task-based analysis method of the application failure probability in optical grid. Then the failure probability of the entire application can be quantified, and the performance of reducing application failure probability in different backup strategies can be compared, so that the different requirements of different clients can be satisfied according to the application failure probability respectively. In optical grid, when the application based DAG (directed acyclic graph) is executed in different backup strategies, the application failure probability and the application complete time is different. This paper will propose new multi-objective differentiated services algorithm (MDSA). New application scheduling algorithm can guarantee the requirement of the failure probability and improve the network resource utilization, realize a compromise between the network operator and the application submission. Then differentiated services can be achieved in optical grid.

Isothermal Amplification and Lateral-Flow Assay for Detecting Crown-Gall-Causing Agrobacterium spp.

Science.gov (United States)

Fuller, Skylar L; Savory, Elizabeth A; Weisberg, Alexandra J; Buser, Jessica Z; Gordon, Michael I; Putnam, Melodie L; Chang, Jeff H

2017-09-01

Agrobacterium is a genus of soilborne gram-negative bacteria. Members carrying oncogenic plasmids can cause crown gall disease, which has significant economic costs, especially for the orchard and nursery industries. Early and rapid detection of pathogenic Agrobacterium spp. is key to the management of crown gall disease. To this end, we designed oligonucleotide primers and probes to target virD2 for use in a molecular diagnostic tool that relies on isothermal amplification and lateral-flow-based detection. The oligonucleotide tools were tested in the assay and evaluated for detection limit and specificity in detecting alleles of virD2. One set of primers that successfully amplified virD2 when used with an isothermal recombinase was selected. Both tested probes had detection limits in picogram amounts of DNA. Probe 1 could detect all tested pathogenic isolates that represented most of the diversity of virD2. Finally, the coupling of lateral-flow detection to the use of these oligonucleotide primers in isothermal amplification helped to reduce the onerousness of the process, and alleviated reliance on specialized tools necessary for molecular diagnostics. The assay is an advancement for the rapid molecular detection of pathogenic Agrobacterium spp.

Gall bladder carcinoma with ampullary carcinoma: A rare case of double malignancy

Directory of Open Access Journals (Sweden)

Praveer Rai

2013-01-01

Full Text Available Simultaneous double cancers in the biliary system are rare. Most are associated with pancreaticobiliary maljunction (PBM. However, it can occur in patients without PBM. Differentiation between these events is important since these two mechanistic origins imply different stages of disease, as well as different subsequent treatments and prognoses. Herein, we report a case of ampullary carcinoma associated with gall bladder carcinoma diagnosed nonoperatively and palliated with biliary metal stenting.

Launch Vehicle Failure Dynamics and Abort Triggering Analysis

Science.gov (United States)

Hanson, John M.; Hill, Ashely D.; Beard, Bernard B.

2011-01-01

Launch vehicle ascent is a time of high risk for an on-board crew. There are many types of failures that can kill the crew if the crew is still on-board when the failure becomes catastrophic. For some failure scenarios, there is plenty of time for the crew to be warned and to depart, whereas in some there is insufficient time for the crew to escape. There is a large fraction of possible failures for which time is of the essence and a successful abort is possible if the detection and action happens quickly enough. This paper focuses on abort determination based primarily on data already available from the GN&C system. This work is the result of failure analysis efforts performed during the Ares I launch vehicle development program. Derivation of attitude and attitude rate abort triggers to ensure that abort occurs as quickly as possible when needed, but that false positives are avoided, forms a major portion of the paper. Some of the potential failure modes requiring use of these triggers are described, along with analysis used to determine the success rate of getting the crew off prior to vehicle demise.

Failure analysis on a ruptured petrochemical pipe

Energy Technology Data Exchange (ETDEWEB)

Harun, Mohd [Industrial Technology Division, Malaysian Nuclear Agency, Ministry of Science, Technology and Innovation Malaysia, Bangi, Kajang, Selangor (Malaysia); Shamsudin, Shaiful Rizam; Kamardin, A. [Univ. Malaysia Perlis, Jejawi, Arau (Malaysia). School of Materials Engineering

2010-08-15

The failure took place on a welded elbow pipe which exhibited a catastrophic transverse rupture. The failure was located on the welding HAZ region, parallel to the welding path. Branching cracks were detected at the edge of the rupture area. Deposits of corrosion products were also spotted. The optical microscope analysis showed the presence of transgranular failures which were related to the stress corrosion cracking (SCC) and were predominantly caused by the welding residual stress. The significant difference in hardness between the welded area and the pipe confirmed the findings. Moreover, the failure was also caused by the low Mo content in the stainless steel pipe which was detected by means of spark emission spectrometer. (orig.)

Corrosion induced failure analysis of subsea pipelines

International Nuclear Information System (INIS)

Yang, Yongsheng; Khan, Faisal; Thodi, Premkumar; Abbassi, Rouzbeh

2017-01-01

Pipeline corrosion is one of the main causes of subsea pipeline failure. It is necessary to monitor and analyze pipeline condition to effectively predict likely failure. This paper presents an approach to analyze the observed abnormal events to assess the condition of subsea pipelines. First, it focuses on establishing a systematic corrosion failure model by Bow-Tie (BT) analysis, and subsequently the BT model is mapped into a Bayesian Network (BN) model. The BN model facilitates the modelling of interdependency of identified corrosion causes, as well as the updating of failure probabilities depending on the arrival of new information. Furthermore, an Object-Oriented Bayesian Network (OOBN) has been developed to better structure the network and to provide an efficient updating algorithm. Based on this OOBN model, probability updating and probability adaptation are performed at regular intervals to estimate the failure probabilities due to corrosion and potential consequences. This results in an interval-based condition assessment of subsea pipeline subjected to corrosion. The estimated failure probabilities would help prioritize action to prevent and control failures. Practical application of the developed model is demonstrated using a case study. - Highlights: • A Bow-Tie (BT) based corrosion failure model linking causation with the potential losses. • A novel Object-Oriented Bayesian Network (OOBN) based corrosion failure risk model. • Probability of failure updating and adaptation with respect to time using OOBN model. • Application of the proposed model to develop and test strategies to minimize failure risk.

Two new species of gall midges (Diptera, Cecidomyiidae associated with Erythroxylum ovalifolium Peyr. (Erythroxylaceae from the Barra de Maricá restinga, Maricá, Rio de Janeiro, Brazil

Directory of Open Access Journals (Sweden)

VC Maia

Full Text Available Two new species of gall midges (Diptera, Cecidomyiidae Dasineura ovalifoliae and Clinodiplosis maricaensis are described based on material from the Barra de Maricá restinga, Maricá, Rio de Janeiro, Brazil. Both species are associated with Erythroxylum ovalifolium Peyr. (Erythroxylaceae. The former is the gall inducer and the latter an inquiline.

Analysis Method of Common Cause Failure on Non-safety Digital Control System

Energy Technology Data Exchange (ETDEWEB)

Kim, Yun Goo; Oh, Eun Gse [KHNP, Daejeon (Korea, Republic of)

2014-08-15

The effects of common cause failure on safety digital instrumentation and control system had been considered in defense in depth analysis with safety analysis method. However, the effects of common cause failure on non-safety digital instrumentation and control system also should be evaluated. The common cause failure can be included in credible failure on the non-safety system. In the I and C architecture of nuclear power plant, many design feature has been applied for the functional integrity of control system. One of that is segmentation. Segmentation defenses the propagation of faults in the I and C architecture. Some of effects from common cause failure also can be limited by segmentation. Therefore, in this paper there are two type of failure mode, one is failures in one control group which is segmented, and the other is failures in multiple control group because that the segmentation cannot defense all effects from common cause failure. For each type, the worst failure scenario is needed to be determined, so the analysis method has been proposed in this paper. The evaluation can be qualitative when there is sufficient justification that the effects are bounded in previous safety analysis. When it is not bounded in previous safety analysis, additional analysis should be done with conservative assumptions method of previous safety analysis or best estimation method with realistic assumptions.

Computer aided approach to qualitative and quantitative common cause failure analysis for complex systems

International Nuclear Information System (INIS)

Cate, C.L.; Wagner, D.P.; Fussell, J.B.

1977-01-01

Common cause failure analysis, also called common mode failure analysis, is an integral part of a complete system reliability analysis. Existing methods of computer aided common cause failure analysis are extended by allowing analysis of the complex systems often encountered in practice. The methods aid in identifying potential common cause failures and also address quantitative common cause failure analysis

Role of scanning electron microscope )SEM) in metal failure analysis

International Nuclear Information System (INIS)

Shaiful Rizam Shamsudin; Hafizal Yazid; Mohd Harun; Siti Selina Abd Hamid; Nadira Kamarudin; Zaiton Selamat; Mohd Shariff Sattar; Muhamad Jalil

2005-01-01

Scanning electron microscope (SEM) is a scientific instrument that uses a beam of highly energetic electrons to examine the surface and phase distribution of specimens on a micro scale through the live imaging of secondary electrons (SE) and back-scattered electrons (BSE) images. One of the main activities of SEM Laboratory at MINT is for failure analysis on metal part and components. The capability of SEM is excellent for determining the root cause of metal failures such as ductility or brittleness, stress corrosion, fatigue and other types of failures. Most of our customers that request for failure analysis are from local petrochemical plants, manufacturers of automotive components, pipeline maintenance personnel and engineers who involved in the development of metal parts and component. This paper intends to discuss some of the technical concepts in failure analysis associated with SEM. (Author)

Failure analysis of medical Linac (LMR-15)

International Nuclear Information System (INIS)

Kato, Kiyotaka; Nakamura, Katsumi; Ogihara, Kiyoshi; Takahashi, Katsuhiko; Sato, Kazuhisa.

1994-01-01

In August 1978, Linac (LMR-15, Z4 Toshiba) was installed at our hospital and in use for 12 years up to September 1990. Recently, we completed working and failure records on this apparatus during the 12-year period, for the purpose of their analysis in the basis of reliability engineering. The results revealed operation rate of 97.85% on the average, mean time between failures (MTBF) from 40-70 hours about the beginning of its working to 280 hours for 2 years before renewal and practically satisfactory values of mean life of parts of life such as magnetron, thyratron and electron gun; the above respective values proved to be above those reported by other literature. On the other hand, we classified, by occurring system, the contents of failures in the apparatus and determined the number of failures and the temperature and humidities in case of failures to examine the correlation between the working environment and failure. The results indicated a change in humidity to gain control of failures in the dosimetric system, especially the monitoring chamber and we could back up the strength of the above correlation from a coefficient of correlation value of 0.84. (author)

Failure analysis of the boiler water-wall tube

Directory of Open Access Journals (Sweden)

S.W. Liu

2017-10-01

Full Text Available Failure analysis of the boiler water-wall tube is presented in this work. In order to examine the causes of failure, various techniques including visual inspection, chemical analysis, optical microscopy, scanning electron microscopy and energy dispersive spectroscopy were carried out. Tube wall thickness measurements were performed on the ruptured tube. The fire-facing side of the tube was observed to have experienced significant wall thinning. The composition of the matrix material of the tube meets the requirements of the relevant standards. Microscopic examinations showed that the spheroidization of pearlite is not very obvious. The failure mechanism is identified as a result of the significant localized wall thinning of the boiler water-wall tube due to oxidation.

Failure analysis of the boiler water-wall tube

OpenAIRE

S.W. Liu; W.Z. Wang; C.J. Liu

2017-01-01

Failure analysis of the boiler water-wall tube is presented in this work. In order to examine the causes of failure, various techniques including visual inspection, chemical analysis, optical microscopy, scanning electron microscopy and energy dispersive spectroscopy were carried out. Tube wall thickness measurements were performed on the ruptured tube. The fire-facing side of the tube was observed to have experienced significant wall thinning. The composition of the matrix material of the tu...

Fuzzy logic prioritization of failures in a system failure mode, effects and criticality analysis

International Nuclear Information System (INIS)

Bowles, John B.; Pelaez, C.E.

1995-01-01

This paper describes a new technique, based on fuzzy logic, for prioritizing failures for corrective actions in a Failure Mode, Effects and Criticality Analysis (FMECA). As in a traditional criticality analysis, the assessment is based on the severity, frequency of occurrence, and detectability of an item failure. However, these parameters are here represented as members of a fuzzy set, combined by matching them against rules in a rule base, evaluated with min-max inferencing, and then defuzzified to assess the riskiness of the failure. This approach resolves some of the problems in traditional methods of evaluation and it has several advantages compared to strictly numerical methods: 1) it allows the analyst to evaluate the risk associated with item failure modes directly using the linguistic terms that are employed in making the criticality assessment; 2) ambiguous, qualitative, or imprecise information, as well as quantitative data, can be used in the assessment and they are handled in a consistent manner; and 3) it gives a more flexible structure for combining the severity, occurrence, and detectability parameters. Two fuzzy logic based approaches for assessing criticality are presented. The first is based on the numerical rankings used in a conventional Risk Priority Number (RPN) calculation and uses crisp inputs gathered from the user or extracted from a reliability analysis. The second, which can be used early in the design process when less detailed information is available, allows fuzzy inputs and also illustrates the direct use of the linguistic rankings defined for the RPN calculations

Analysis of dependent failures in the ORNL precursor study

International Nuclear Information System (INIS)

Ballard, G.M.

1985-01-01

The study of dependent failures (or common cause/mode failures) in the safety assessment of potentially hazardous plant is one of the significant areas of uncertainty in performing probabilistic safety studies. One major reason for this uncertainty is that data on dependent failures is apparently not readily available in sufficient quantity to assist in the development and validation of models. The incident reports that were compiled for the ORNL study on Precursors to Severe Core Damage Accidents (NUREG/CR-2497) provide an opportunity to look at the importance of dependent failures in the most significant incidents of recent reactor operations, to look at the success of probabilistic risk assessment (PRA) methods in accounting for the contribution of dependent failures, and to look at the dependent failure incidents with the aim of identifying the most significant problem areas. In this paper an analysis has been made of the incidents compiled in NUREG/CR-2497 and events involving multiple failures which were not independent have been identified. From this analysis it is clear that dependent failures are a very significant contributor to the precursor incidents. The method of enumeration of accident frequency used in NUREG-2497 can be shown to take account of dependent failures and this may be a significant factor contributing to the apparent difference between the precursor accident frequency and typical PRA frequencies

Vicarious visualization of gall bladder on 99mTc ethylene dicysteine renal dynamic study

International Nuclear Information System (INIS)

Arora, Geetanjali; Damle, Nishikant A.; Tripathi, Madhavi; Bal, Chandrasekhar; Praveen Kumar

2012-01-01

Though the hepatobiliary excretion of Technetium-99m ethylene dicysteine ( 99m Tc-EC) is very low and usually does not effect image interpretation on routine posterior imaging, the possibility of visualization of the gall bladder should be kept in mind while reporting the 99m Tc-EC scan especially, when anterior imaging is performed as in renal transplant patients. (author)

Egg parasitoids (Hymenoptera: Mymaridae and Trichogrammatidae) of the gall-making leafhopper Scenergates viridis (Hemiptera: Cicadellidae) from Uzbekistan, with taxonomic notes on the Palaearctic species of Aphelinoidea.

Science.gov (United States)

Rakitov, Roman; Triapitsyn, Serguei V

2013-01-01

A new species of the Aphelinoidea Girault (Hymenoptera: Trichogrammatidae), A. (Aphelinoidea) sariq Triapitsyn & Rakitov sp. n., is described from Uzbekistan. Both sexes were reared from eggs of the only known truly gall-making leafhopper, Scenergates viridis (Vilbaste), laid inside its galls on camelthorn, Alhagi maurorum Medikus; additional females were found dead inside the galls. Aphelinoidea sariq is the only known species of the nominate subgenus of Aphelinoidea whose body color is predominantly yellow. Taxonomic notes on other Palaearctic species of Aphelinoidea are provided; A. scythica Fursov, syn. n. is synonymized underA. (Aphelinoidea) turanica S. Trjapitzin. Another trichogrammatid, Par-acentrobia (Paracentrobia) sp., was reared from eggs of S. viridis in much smaller numbers. Also described from the same locality and host is Gonatocerus (Lymaenon) mitjaevi Triapitsyn & Rakitov sp. n. (Hymenoptera: Mymaridae).

Failure modes and effects analysis of fusion magnet systems

International Nuclear Information System (INIS)

Zimmermann, M.; Kazimi, M.S.; Siu, N.O.; Thome, R.J.

1988-12-01

A failure modes and consequence analysis of fusion magnet system is an important contributor towards enhancing the design by improving the reliability and reducing the risk associated with the operation of magnet systems. In the first part of this study, a failure mode analysis of a superconducting magnet system is performed. Building on the functional breakdown and the fault tree analysis of the Toroidal Field (TF) coils of the Next European Torus (NET), several subsystem levels are added and an overview of potential sources of failures in a magnet system is provided. The failure analysis is extended to the Poloidal Field (PF) magnet system. Furthermore, an extensive analysis of interactions within the fusion device caused by the operation of the PF magnets is presented in the form of an Interaction Matrix. A number of these interactions may have significant consequences for the TF magnet system particularly interactions triggered by electrical failures in the PF magnet system. In the second part of this study, two basic categories of electrical failures in the PF magnet system are examined: short circuits between the terminals of external PF coils, and faults with a constant voltage applied at external PF coil terminals. An electromagnetic model of the Compact Ignition Tokamak (CIT) is used to examine the mechanical load conditions for the PF and the TF coils resulting from these fault scenarios. It is found that shorts do not pose large threats to the PF coils. Also, the type of plasma disruption has little impact on the net forces on the PF and the TF coils. 39 refs., 30 figs., 12 tabs

Failure analysis of fractured dental zirconia implants.

Science.gov (United States)

Gahlert, M; Burtscher, D; Grunert, I; Kniha, H; Steinhauser, E

2012-03-01

The purpose of the present study was the macroscopic and microscopic failure analysis of fractured zirconia dental implants. Thirteen fractured one-piece zirconia implants (Z-Look3) out of 170 inserted implants with an average in situ period of 36.75±5.34 months (range from 20 to 56 months, median 38 months) were prepared for macroscopic and microscopic (scanning electron microscopy [SEM]) failure analysis. These 170 implants were inserted in 79 patients. The patient histories were compared with fracture incidences to identify the reasons for the failure of the implants. Twelve of these fractured implants had a diameter of 3.25 mm and one implant had a diameter of 4 mm. All fractured implants were located in the anterior side of the maxilla and mandibula. The patient with the fracture of the 4 mm diameter implant was adversely affected by strong bruxism. By failure analysis (SEM), it could be demonstrated that in all cases, mechanical overloading caused the fracture of the implants. Inhomogeneities and internal defects of the ceramic material could be excluded, but notches and scratches due to sandblasting of the surface led to local stress concentrations that led to the mentioned mechanical overloading by bending loads. The present study identified a fracture rate of nearly 10% within a follow-up period of 36.75 months after prosthetic loading. Ninety-two per cent of the fractured implants were so-called diameter reduced implants (diameter 3.25 mm). These diameter reduced implants cannot be recommended for further clinical use. Improvement of the ceramic material and modification of the implant geometry has to be carried out to reduce the failure rate of small-sized ceramic implants. Nevertheless, due to the lack of appropriate laboratory testing, only clinical studies will demonstrate clearly whether and how far the failure rate can be reduced. © 2011 John Wiley & Sons A/S.

Revealing the inventory of type III effectors in Pantoea agglomerans gall-forming pathovars using draft genome sequences and a machine-learning approach.

Science.gov (United States)

Nissan, Gal; Gershovits, Michael; Morozov, Michael; Chalupowicz, Laura; Sessa, Guido; Manulis-Sasson, Shulamit; Barash, Isaac; Pupko, Tal

2018-02-01

Pantoea agglomerans, a widespread epiphytic bacterium, has evolved into a hypersensitive response and pathogenicity (hrp)-dependent and host-specific gall-forming pathogen by the acquisition of a pathogenicity plasmid containing a type III secretion system (T3SS) and its effectors (T3Es). Pantoea agglomerans pv. betae (Pab) elicits galls on beet (Beta vulgaris) and gypsophila (Gypsophila paniculata), whereas P. agglomerans pv. gypsophilae (Pag) incites galls on gypsophila and a hypersensitive response (HR) on beet. Draft genome sequences were generated and employed in combination with a machine-learning approach and a translocation assay into beet roots to identify the pools of T3Es in the two pathovars. The genomes of the sequenced Pab4188 and Pag824-1 strains have a similar size (∼5 MB) and GC content (∼55%). Mutational analysis revealed that, in Pab4188, eight T3Es (HsvB, HsvG, PseB, DspA/E, HopAY1, HopX2, HopAF1 and HrpK) contribute to pathogenicity on beet and gypsophila. In Pag824-1, nine T3Es (HsvG, HsvB, PthG, DspA/E, HopAY1, HopD1, HopX2, HopAF1 and HrpK) contribute to pathogenicity on gypsophila, whereas the PthG effector triggers HR on beet. HsvB, HsvG, PthG and PseB appear to endow pathovar specificities to Pab and Pag, and no homologous T3Es were identified for these proteins in other phytopathogenic bacteria. Conversely, the remaining T3Es contribute to the virulence of both pathovars, and homologous T3Es were found in other phytopathogenic bacteria. Remarkably, HsvG and HsvB, which act as host-specific transcription factors, displayed the largest contribution to disease development. © 2016 BSPP AND JOHN WILEY & SONS LTD.

Chaves para classificação de galhas de Cecidomyiidae (Diptera em Myrtaceae na Restinga da Barra de Maricá, Rio de Janeiro Keys to separation of Cecidomyiidae (Diptera galls on Myrtaceae at Restinga da Barra de Maricá, Rio de Janeiro

Directory of Open Access Journals (Sweden)

Valéria Cid Maia

1995-01-01

Full Text Available Keys to Cecidomyiidae galls occuring on Myrtaceae by genus of the host plant, in alphabetical order, are presented. Data on gall makers, predators and inquilinous species are given, as well as illustrations of the galls.

Failure mode and effects analysis: an empirical comparison of failure mode scoring procedures.

Science.gov (United States)

Ashley, Laura; Armitage, Gerry

2010-12-01

To empirically compare 2 different commonly used failure mode and effects analysis (FMEA) scoring procedures with respect to their resultant failure mode scores and prioritization: a mathematical procedure, where scores are assigned independently by FMEA team members and averaged, and a consensus procedure, where scores are agreed on by the FMEA team via discussion. A multidisciplinary team undertook a Healthcare FMEA of chemotherapy administration. This included mapping the chemotherapy process, identifying and scoring failure modes (potential errors) for each process step, and generating remedial strategies to counteract them. Failure modes were scored using both an independent mathematical procedure and a team consensus procedure. Almost three-fifths of the 30 failure modes generated were scored differently by the 2 procedures, and for just more than one-third of cases, the score discrepancy was substantial. Using the Healthcare FMEA prioritization cutoff score, almost twice as many failure modes were prioritized by the consensus procedure than by the mathematical procedure. This is the first study to empirically demonstrate that different FMEA scoring procedures can score and prioritize failure modes differently. It found considerable variability in individual team members' opinions on scores, which highlights the subjective and qualitative nature of failure mode scoring. A consensus scoring procedure may be most appropriate for FMEA as it allows variability in individuals' scores and rationales to become apparent and to be discussed and resolved by the team. It may also yield team learning and communication benefits unlikely to result from a mathematical procedure.

Failure analysis of stainless steel femur fixation plate.

Science.gov (United States)

Hussain, P B; Mohammad, M

2004-05-01

Failure analysis was performed to investigate the failure of the femur fixation plate which was previously fixed on the femur of a girl. Radiography, metallography, fractography and mechanical testing were conducted in this study. The results show that the failure was due to the formation of notches on the femur plate. These notches act as stress raisers from where the cracks start to propagate. Finally fracture occurred on the femur plate and subsequently, the plate failed.

failure analysis of a uav flight control system using markov analysis

African Journals Online (AJOL)

eobe

2016-01-01

Jan 1, 2016 ... Tree Analysis (FTA), Dependence Diagram Analysis. (DDA) and Markov Analysis (MA) are the most widely-used methods of probabilistic safety and reliability analysis for airborne system [1]. Fault trees analysis is a backward failure searching ..... [4] Christopher Dabrowski and Fern Hunt Markov Chain.

Early failure analysis of machining centers: a case study

International Nuclear Information System (INIS)

Wang Yiqiang; Jia Yazhou; Jiang Weiwei

2001-01-01

To eliminate the early failures and improve the reliability, nine ex-factory machining centers are traced under field conditions in workshops. Their early failure information throughout the ex-factory run-in test is collected. The field early failure database is constructed based on the collection of field early failure data and the codification of data. Early failure mode and effects analysis is performed to indicate the weak subsystem of a machining center or the troublemaker. The distribution of the time between early failures is analyzed and the optimal ex-factory run-in test time for machining center that may expose sufficiently the early failures and cost minimum is discussed. Suggestions how to arrange ex-factory run-in test and how to take actions to reduce early failures for machining center is proposed

Insetos galhadores associados a duas espécies de plantas invasoras de áreas urbanas e peri-urbanas Galling insects associated with two species of ruderal plants in urban and peri urban areas

Directory of Open Access Journals (Sweden)

Genimar R. Julião

2005-03-01

que áreas verdes em espaços urbanos são de fundamental importância na manutenção da diversidade de insetos.Insects have been considered as important bioindicators of environmental changes and habitat quality. In spite of its sessile habit, easy localization, abundance and host specificity, insects that induce galls have not been utilized in studies of this nature. It was investigated the suitability of gall-inducing insects associated to two ruderal host plant species (Baccharis dracunculifolia and Vernonia polyanthes: Asteraceae as bioindicators of habitat quality. The following questions were addressed: (i is gall-inducing insect diversity influenced by different types of land use?; (ii are the responses of galling insect communities different between host plants?; (iii how does the biotic and physical features of the biotope influence the gall-inducing insect diversity? It was found 6,226 galls, belonging to six galling insect species on V. polyanthes and 11 galling species on B. dracunculifolia. No difference was found in galling species richness among land use types. Nevertheless, gall-forming insect abundance was statistically different among the biotopes studied. Insect galls were more numerous in biotopes with lower urbanization levels. Gall abundance showed a strong and positive relationship with the percentage of vegetal cover. Gall-forming insect communities on both host species showed differential responses to the different land use types. The results suggest that three factors may be involved with galling insect diversity in urban areas: (i habitat structure in the biotope; (ii resource abundance (host plant abundance and distribution; and (iii frequency and intensity of management in reserves, parks, city squares, wastelands found at a given urban area.

New distribution records of the gall crab Opecarcinus cathyae van der Meij, 2014 (Decapoda: Brachyura: Cryptochiridae) from the Red Sea, Maldives and Japan

KAUST Repository

Meij, Sancia E. T.

2016-11-12

The gall crab Opecarcinus cathyae van der Meij, 2014 has been reported from various localities in Indonesia and Malaysia. Recent surveys in the Red Sea, Maldives and Japan yielded additional specimens of O. cathyae, considerably expanding the known distribution range of this species to the east and west. The identity of O. cathyae was confirmed based on COI sequence data, revealing identical haplotypes for the Red Sea, Maldivian and Japanese material and three haplotypes in the Indonesian material. Opecarcinus cathyae has one of the widest known recorded distribution ranges for all gall crab species.

New distribution records of the gall crab Opecarcinus cathyae van der Meij, 2014 (Decapoda: Brachyura: Cryptochiridae) from the Red Sea, Maldives and Japan

KAUST Repository

Meij, Sancia E. T.; Benzoni, Francesca; Berumen, Michael L.; Naruse, Tohru

2016-01-01

The gall crab Opecarcinus cathyae van der Meij, 2014 has been reported from various localities in Indonesia and Malaysia. Recent surveys in the Red Sea, Maldives and Japan yielded additional specimens of O. cathyae, considerably expanding the known distribution range of this species to the east and west. The identity of O. cathyae was confirmed based on COI sequence data, revealing identical haplotypes for the Red Sea, Maldivian and Japanese material and three haplotypes in the Indonesian material. Opecarcinus cathyae has one of the widest known recorded distribution ranges for all gall crab species.

Biliary peritonitis due to gall bladder perforation after percutaneous nephrolithotomy

Directory of Open Access Journals (Sweden)

Nikhil Ranjan

2015-01-01

Full Text Available A 19-year-old male patient underwent right percutaneous nephrolithotomy (PNL for right renal 1.5 × 1.5 cm lower pole stone. The procedure was completed uneventfully with complete stone clearance. The patient developed peritonitis and shock 48 h after the procedure. Exploratory laparotomy revealed a large amount of bile in the abdomen along with three small perforations in the gall bladder (GB and one perforation in the caudate lobe of the liver. Retrograde cholecystectomy was performed but the patient did not recover and expired post-operatively. This case exemplifies the high mortality of GB perforation after PNL and the lack of early clinical signs.

Gallé, une vie au tournant du siècle.

Directory of Open Access Journals (Sweden)

Isabelle Debilly

2004-05-01

Full Text Available La collection Découvertes de Gallimard propose un nouveau volume dédié à Émile Gallé, le magicien du verre . Il s’agit là déjà, du 446 e numéro de cette collection destinée à l’origine aux adolescents. Ce principe a été en grande partie abandonné, même si l’on trouve encore les volumes de cette collection dans les rayons « jeunesse » de certaines librairies. Le grand public a depuis longtemps plébiscité ces ouvrages qui présentent une riche iconographie, ...

Reliability analysis based on the losses from failures.

Science.gov (United States)

Todinov, M T

2006-04-01

The conventional reliability analysis is based on the premise that increasing the reliability of a system will decrease the losses from failures. On the basis of counterexamples, it is demonstrated that this is valid only if all failures are associated with the same losses. In case of failures associated with different losses, a system with larger reliability is not necessarily characterized by smaller losses from failures. Consequently, a theoretical framework and models are proposed for a reliability analysis, linking reliability and the losses from failures. Equations related to the distributions of the potential losses from failure have been derived. It is argued that the classical risk equation only estimates the average value of the potential losses from failure and does not provide insight into the variability associated with the potential losses. Equations have also been derived for determining the potential and the expected losses from failures for nonrepairable and repairable systems with components arranged in series, with arbitrary life distributions. The equations are also valid for systems/components with multiple mutually exclusive failure modes. The expected losses given failure is a linear combination of the expected losses from failure associated with the separate failure modes scaled by the conditional probabilities with which the failure modes initiate failure. On this basis, an efficient method for simplifying complex reliability block diagrams has been developed. Branches of components arranged in series whose failures are mutually exclusive can be reduced to single components with equivalent hazard rate, downtime, and expected costs associated with intervention and repair. A model for estimating the expected losses from early-life failures has also been developed. For a specified time interval, the expected losses from early-life failures are a sum of the products of the expected number of failures in the specified time intervals covering the

Beyond reliability, multi-state failure analysis of satellite subsystems: A statistical approach

International Nuclear Information System (INIS)

Castet, Jean-Francois; Saleh, Joseph H.

2010-01-01

Reliability is widely recognized as a critical design attribute for space systems. In recent articles, we conducted nonparametric analyses and Weibull fits of satellite and satellite subsystems reliability for 1584 Earth-orbiting satellites launched between January 1990 and October 2008. In this paper, we extend our investigation of failures of satellites and satellite subsystems beyond the binary concept of reliability to the analysis of their anomalies and multi-state failures. In reliability analysis, the system or subsystem under study is considered to be either in an operational or failed state; multi-state failure analysis introduces 'degraded states' or partial failures, and thus provides more insights through finer resolution into the degradation behavior of an item and its progression towards complete failure. The database used for the statistical analysis in the present work identifies five states for each satellite subsystem: three degraded states, one fully operational state, and one failed state (complete failure). Because our dataset is right-censored, we calculate the nonparametric probability of transitioning between states for each satellite subsystem with the Kaplan-Meier estimator, and we derive confidence intervals for each probability of transitioning between states. We then conduct parametric Weibull fits of these probabilities using the Maximum Likelihood Estimation (MLE) approach. After validating the results, we compare the reliability versus multi-state failure analyses of three satellite subsystems: the thruster/fuel; the telemetry, tracking, and control (TTC); and the gyro/sensor/reaction wheel subsystems. The results are particularly revealing of the insights that can be gleaned from multi-state failure analysis and the deficiencies, or blind spots, of the traditional reliability analysis. In addition to the specific results provided here, which should prove particularly useful to the space industry, this work highlights the importance

Extending Failure Modes and Effects Analysis Approach for Reliability Analysis at the Software Architecture Design Level

NARCIS (Netherlands)

Sözer, Hasan; Tekinerdogan, B.; Aksit, Mehmet; de Lemos, Rogerio; Gacek, Cristina

2007-01-01

Several reliability engineering approaches have been proposed to identify and recover from failures. A well-known and mature approach is the Failure Mode and Effect Analysis (FMEA) method that is usually utilized together with Fault Tree Analysis (FTA) to analyze and diagnose the causes of failures.

Machinery failure analysis and troubleshooting practical machinery management for process plants

CERN Document Server

Bloch, Heinz P

2012-01-01

Solve the machinery failure problems costing you time and money with this classic, comprehensive guide to analysis and troubleshooting  Provides detailed, complete and accurate information on anticipating risk of component failure and avoiding equipment downtime Includes numerous photographs of failed parts to ensure you are familiar with the visual evidence you need to recognize Covers proven approaches to failure definition and offers failure identification and analysis methods that can be applied to virtually all problem situations Demonstr

Root cause of failure analysis and the system engineer

International Nuclear Information System (INIS)

Coppock, M.S.; Hartwig, A.W.

1990-01-01

In an industry where ever-increasing emphasis is being placed on root cause of failure determination, it is imperative that a successful nuclear utility have an effective means of identifying failures and performing the necessary analyses. The current Institute of Nuclear Power Operations (INPO) good practice, OE-907, root-cause analysis, gives references to methodology that will help determine breakdowns in procedures, programs, or design but gives very little guidance on how or when to perform component root cause of failure analyses. The system engineers of nuclear utilities are considered the focal point for their respective systems and are required by most programs to investigate component failures. The problem that the system engineer faces in determining a component root cause of failures lies in acquisition of the necessary data to identify the need to perform the analysis and in having the techniques and equipment available to perform it. The system engineers at the Palo Verde nuclear generating station routinely perform detailed component root cause of failure analyses. The Palo Verde program provides the system engineers with the information necessary to identify when a component root cause of failure is required. Palo Verde also has the necessary equipment on-site to perform the analyses

Process Equipment Failure Mode Analysis in a Chemical Industry

Directory of Open Access Journals (Sweden)

J. Nasl Seraji

2008-04-01

Full Text Available Background and aims   Prevention of potential accidents and safety promotion in chemical processes requires systematic safety management in them. The main objective of this study was analysis of important process equipment components failure modes and effects in H2S and CO2  isolation from extracted natural gas process.   Methods   This study was done in sweetening unit of an Iranian gas refinery. Failure Mode and Effect Analysis (FMEA used for identification of process equipments failures.   Results   Totally 30 failures identified and evaluated using FMEA. P-1 blower's blade breaking and sour gas pressure control valve bearing tight moving had maximum risk Priority number (RPN, P-1 body corrosion and increasing plug lower side angle of reach DEAlevel control valve  in tower - 1 were minimum calculated RPN.   Conclusion   By providing a reliable documentation system for equipment failures and  incidents recording, maintaining of basic information for later safety assessments would be  possible. Also, the probability of failures and effects could be minimized by conducting preventive maintenance.

Dissimilar weld failure analysis and development program

International Nuclear Information System (INIS)

Holko, K.H.; Li, C.C.

1982-01-01

The problem of dissimilar weld cracking and failure is examined. This problem occurs in boiler superheater and reheater sections as well as main steam piping. Typically, a dissimilar weld joins low-alloy steel tubing such as Fe-2-1/4 Cr-1Mo to stainless steel tubing such as 321H and 304H. Cracking and failure occur in the low-alloy steel heat-affected zone very close to the weld interface. The 309 stainless steel filler previously used has been replaced with nickel-base fillers such as Inconel 132, Inconel 182, and Incoweld A. This change has extended the time to cracking and failure, but has not solved the problem. To illustrate and define the problem, the metallography of damaged and failed dissimilar welds is described. Results of mechanical tests of dissimilar welds removed from service are presented, and factors believed to be influential in causing damage and failure are discussed. In addition, the importance of dissimilar weldment service history is demonstrated, and the Dissimilar Weld Failure Analysis and Development Program is described. 15 figures

Analysis of reactor trips involving balance-of-plant failures

International Nuclear Information System (INIS)

Seth, S.; Skinner, L.; Ettlinger, L.; Lay, R.

1986-01-01

The relatively high frequency of plant transients leading to reactor trips at nuclear power plants in the US is of economic and safety concern to the industry. A majority of such transients is due to failures in the balance-of-plant (BOP) systems. As a part of a study conducted for the US Nuclear Regulatory Commission, Mitre has carried out a further analysis of the BOP failures associated with reactor trips. The major objectives of the analysis were to examine plant-to-plant variations in BOP-related trips, to understand the causes of failures, and to determine the extent of any associated safety system challenges. The analysis was based on the Licensee Event Reports submitted on all commercial light water reactors during the 2-yr period, 1984-1985

Study on shielded pump system failure analysis method based on Bayesian network

International Nuclear Information System (INIS)

Bao Yilan; Huang Gaofeng; Tong Lili; Cao Xuewu

2012-01-01

This paper applies Bayesian network to the system failure analysis, with an aim to improve knowledge representation of the uncertainty logic and multi-fault states in system failure analysis. A Bayesian network for shielded pump failure analysis is presented, conducting fault parameter learning, updating Bayesian network parameter based on new samples. Finally, through the Bayesian network inference, vulnerability in this system, the largest possible failure modes, and the fault probability are obtained. The powerful ability of Bayesian network to analyze system fault is illustrated by examples. (authors)

Financial cost to institutions on patients waiting for gall bladder disease surgery.

Science.gov (United States)

Waqas, Ahmed; Qasmi, Shahzad Ahmed; Kiani, Faran; Raza, Ahmed; Khan, Khizar Ishtiaque; Manzoor, Shazia

2014-01-01

The aim of this study was to determine the financial costs to institution on patients waiting for gall bladder disease surgery and suggest measures to reduce them. This multi-centre prospective descriptive survey was performed on all patients who underwent an elective cholecystectomy by three consultants at secondary care hospitals in Pakistan between Jan 2010 to Jan 2012. Data was collected on demographics, the duration of mean waiting time, specific indications and nature of disease for including the patients in the waiting list, details of emergency re-admissions while awaiting surgery, investigations done, treatment given and expenditures incurred on them during these episodes. A total of 185 patients underwent elective open cholecystectomy. The indications for listing the patients for surgery were biliary colic in 128 patients (69%), acute cholecystitis in 43 patients (23%), obstructive jaundice in 8 patients (4.5%) and acute pancreatitis in 6 patients (3.2%). 146 (78.9%) and 39 (21.1%) of patients were listed as outdoor electives and indoor emergencies respectively. Of the 185 patients, 54 patients (29.2%) were re-admitted. Financial costs in Pakistani rupees per episode of readmission were 23050 per episode in total and total money spent on all readmissions was Rs. 17,05,700/-. Financial costs on health care institutions due to readmissions in patients waiting for gall bladder disease surgery are high. Identifying patients at risk for these readmissions and offering them early laparoscopic cholecystectomy is very important.

Phenological relationships between two insect galls and their host plants: Aspidosperma australe and A. spruceanum (Apocynaceae Relações fenológicas entre duas galhas induzidas por insetos e suas plantas hospedeiras: Aspidosperma australe e A. spruceanum (Apocynaceae

Directory of Open Access Journals (Sweden)

Priscila Tolentino Campos

2010-09-01

Full Text Available Although gall diversity in the Neotropical region is immense, comparative studies on the phenology of host plants and their galls are scarce. Gall systems generally require high levels of phenological synchrony between the associated organisms. The relationships between the phenology of two leaf galls induced by an unidentified Cecidomyiidae in Aspidosperma spruceanum Benth. ex Müell. Arg. and by Pseudophacopteron sp. in A. australe Müell. Arg. were investigated. The investigation was performed on ten individuals per species in 15-day intervals taking into consideration the percentage of galled leaves. In a one-year study, three distinct phenophases for the leaf galls and four phenophases for host plants were observed. The maximum percentage of leaf galls (80% on A. australe occurred just after the peak of leaf sprouting. In A. spruceanum, the percentage of leaf galls was always over 50%, which can be related to continuous leaf production and gall induction in this species. In both species, developing galls were observed over the entire year, indicating multivoltinism. The ability to induce galls at young and mature sites seems to be a good strategy for galling species survivorship.Embora a diversidade de galhas na região neotropical seja grande, poucos são os estudos fenológicos comparando a fenologia das espécies hospedeiras com aquela das galhas. O desenvolvimento de galhas geralmente requer alta sincronia fenológica entre os organismos associados. A relação entre a fenologia de duas galhas foliares induzidas por um Cecidomyiidae e Aspidosperma spruceanum Benth. ex Müell. Arg. e de uma espécie de Pseudophacopteron sp. e A. australe Müell. Arg. foram investigadas. O trabalho foi realizado em dez indivíduos de cada espécie em intervalos quinzenais, levando em consideração a percentagem de folhas galhadas. Durante um ano, foram observadas três fenofases distintas para as galhas foliares e quatro fenofases para a hospedeira. A

Comprehensive method of common-mode failure analysis for LMFBR safety systems

International Nuclear Information System (INIS)

Unione, A.J.; Ritzman, R.L.; Erdmann, R.C.

1976-01-01

A technique is demonstrated which allows the systematic treatment of common-mode failures of safety system performance. The technique uses log analysis in the form of fault and success trees to qualitatively assess the sources of common-mode failure and quantitatively estimate the contribution to the overall risk of system failure. The analysis is applied to the secondary control rod system of an early sized LMFBR

Challenges in Resolution for IC Failure Analysis

Science.gov (United States)

Martinez, Nick

1999-10-01

Resolution is becoming more and more of a challenge in the world of Failure Analysis in integrated circuits. This is a result of the ongoing size reduction in microelectronics. Determining the cause of a failure depends upon being able to find the responsible defect. The time it takes to locate a given defect is extremely important so that proper corrective actions can be taken. The limits of current microscopy tools are being pushed. With sub-micron feature sizes and even smaller killing defects, optical microscopes are becoming obsolete. With scanning electron microscopy (SEM), the resolution is high but the voltage involved can make these small defects transparent due to the large mean-free path of incident electrons. In this presentation, I will give an overview of the use of inspection methods in Failure Analysis and show example studies of my work as an Intern student at Texas Instruments. 1. Work at Texas Instruments, Stafford, TX, was supported by TI. 2. Work at Texas Tech University, was supported by NSF Grant DMR9705498.

Probabilistic analysis on the failure of reactivity control for the PWR

Science.gov (United States)

Sony Tjahyani, D. T.; Deswandri; Sunaryo, G. R.

2018-02-01

The fundamental safety function of the power reactor is to control reactivity, to remove heat from the reactor, and to confine radioactive material. The safety analysis is used to ensure that each parameter is fulfilled during the design and is done by deterministic and probabilistic method. The analysis of reactivity control is important to be done because it will affect the other of fundamental safety functions. The purpose of this research is to determine the failure probability of the reactivity control and its failure contribution on a PWR design. The analysis is carried out by determining intermediate events, which cause the failure of reactivity control. Furthermore, the basic event is determined by deductive method using the fault tree analysis. The AP1000 is used as the object of research. The probability data of component failure or human error, which is used in the analysis, is collected from IAEA, Westinghouse, NRC and other published documents. The results show that there are six intermediate events, which can cause the failure of the reactivity control. These intermediate events are uncontrolled rod bank withdrawal at low power or full power, malfunction of boron dilution, misalignment of control rod withdrawal, malfunction of improper position of fuel assembly and ejection of control rod. The failure probability of reactivity control is 1.49E-03 per year. The causes of failures which are affected by human factor are boron dilution, misalignment of control rod withdrawal and malfunction of improper position for fuel assembly. Based on the assessment, it is concluded that the failure probability of reactivity control on the PWR is still within the IAEA criteria.

A quantitative method for Failure Mode and Effects Analysis

NARCIS (Netherlands)

Braaksma, Anne Johannes Jan; Meesters, A.J.; Klingenberg, W.; Hicks, C.

2012-01-01

Failure Mode and Effects Analysis (FMEA) is commonly used for designing maintenance routines by analysing potential failures, predicting their effect and facilitating preventive action. It is used to make decisions on operational and capital expenditure. The literature has reported that despite its

Failure mode analysis of a PCRV. Influence of some hypothesis

International Nuclear Information System (INIS)

Zimmermann, T.; Saugy, B.; Rebora, B.

1975-01-01

This paper is concerned with the most recent developments and results obtained using a mathematical model for the non-linear analysis of massive reinforced and prestressed concrete strucures developed by the IPEN at the Swiss Federal Institute of Technology, in Lausanne. The method is based on three-dimensional isoparametric finite elements. A linear solution is adapted step by step to the idealized behavior laws of the materials up to the failure of the structure. The laws proposed here for the non-linear behavior of concrete and steel have been described elsewhere but a simple extension to the time-dependent behavior is presented. A numerical algorithm for the superposition of creep deformations is also proposed, the basic creep law being supposed to satisfy a power expression. Time-dependent failure is discussed. The calculus of a PCRV of a helium cooled fast reactor is then performed and the influence of the liner on the failure mode is analyzed. The failure analysis under increasing internal pressure is run at the present time and the influence of an eventual pressure in the cracks is being investigated. The paper aims mainly to demonstrate the accuracy of a failure analysis by three-dimensional finite-elements and to compare it with a model test, in particular when complete deformation and failure tests of the materials are available. The proposed model has already been extensively tested on simple structures and has proved to be useful for the analysis of different simplifying hypotheses

Failure analysis of a Francis turbine runner

Energy Technology Data Exchange (ETDEWEB)

Frunzaverde, D; Campian, V [Research Center in Hydraulics, Automation and Heat Transfer, ' Eftimie Murgu' University of Resita P-ta Traian Vuia 1-4, RO-320085, Resita (Romania); Muntean, S [Centre of Advanced Research in Engineering Sciences, Romanian Academy - Timisoara Branch Bv. Mihai Viteazu 24, RO-300223, Timisoara (Romania); Marginean, G [University of Applied Sciences Gelsenkirchen, Neidenburger Str. 10, 45877 Gelsenkirchen (Germany); Marsavina, L [Department of Strength, ' Politehnica' University of Timisoara, Bv. Mihai Viteazu 1, RO-300222, Timisoara (Romania); Terzi, R; Serban, V, E-mail: gabriela.marginean@fh-gelsenkirchen.d, E-mail: d.frunzaverde@uem.r [Ramnicu Valcea Subsidiary, S.C. Hidroelectrica S.A., Str. Decebal 11, RO-240255, Ramnicu Valcea (Romania)

2010-08-15

The variable demand on the energy market requires great flexibility in operating hydraulic turbines. Therefore, turbines are frequently operated over an extended range of regimes. Francis turbines operating at partial load present pressure fluctuations due to the vortex rope in the draft tube cone. This phenomenon generates strong vibrations and noise that may produce failures on the mechanical elements of the machine. This paper presents the failure analysis of a broken Francis turbine runner blade. The failure appeared some months after the welding repair work realized in situ on fatigue cracks initiated near to the trailing edge at the junction with the crown, where stress concentration occurs. In order to determine the causes that led to the fracture of the runner blade, the metallographic investigations on a sample obtained from the blade is carried out. The metallographic investigations included macroscopic and microscopic examinations, both performed with light and scanning electron microscopy, as well as EDX - analyses. These investigations led to the conclusion, that the cracking of the blade was caused by fatigue, initiated by the surface unevenness of the welding seam. The failure was accelerated by the hydrogen embrittlement of the filling material, which appeared as a consequence of improper welding conditions. In addition to the metallographic investigations, numerical computations with finite element analysis are performed in order to evaluate the deformation and stress distribution on blade.

Failure analysis of a Francis turbine runner

International Nuclear Information System (INIS)

Frunzaverde, D; Campian, V; Muntean, S; Marginean, G; Marsavina, L; Terzi, R; Serban, V

2010-01-01

The variable demand on the energy market requires great flexibility in operating hydraulic turbines. Therefore, turbines are frequently operated over an extended range of regimes. Francis turbines operating at partial load present pressure fluctuations due to the vortex rope in the draft tube cone. This phenomenon generates strong vibrations and noise that may produce failures on the mechanical elements of the machine. This paper presents the failure analysis of a broken Francis turbine runner blade. The failure appeared some months after the welding repair work realized in situ on fatigue cracks initiated near to the trailing edge at the junction with the crown, where stress concentration occurs. In order to determine the causes that led to the fracture of the runner blade, the metallographic investigations on a sample obtained from the blade is carried out. The metallographic investigations included macroscopic and microscopic examinations, both performed with light and scanning electron microscopy, as well as EDX - analyses. These investigations led to the conclusion, that the cracking of the blade was caused by fatigue, initiated by the surface unevenness of the welding seam. The failure was accelerated by the hydrogen embrittlement of the filling material, which appeared as a consequence of improper welding conditions. In addition to the metallographic investigations, numerical computations with finite element analysis are performed in order to evaluate the deformation and stress distribution on blade.

Wheat Mds-1 encodes a heat-shock protein and governs susceptibility towards the Hessian fly gall midge

Science.gov (United States)

Plant pests including insects must manipulate plants in order to utilize the nutrition and environment of the host. Here, we show that the heat-shock protein gene Mayetiola destructor susceptibility gene-1 (Mds-1) is a major susceptibility gene in wheat that allows the gall midge M. destructor, com...

TU-AB-BRD-02: Failure Modes and Effects Analysis

Energy Technology Data Exchange (ETDEWEB)

Huq, M. [University of Pittsburgh Medical Center (United States)

2015-06-15

Current quality assurance and quality management guidelines provided by various professional organizations are prescriptive in nature, focusing principally on performance characteristics of planning and delivery devices. However, published analyses of events in radiation therapy show that most events are often caused by flaws in clinical processes rather than by device failures. This suggests the need for the development of a quality management program that is based on integrated approaches to process and equipment quality assurance. Industrial engineers have developed various risk assessment tools that are used to identify and eliminate potential failures from a system or a process before a failure impacts a customer. These tools include, but are not limited to, process mapping, failure modes and effects analysis, fault tree analysis. Task Group 100 of the American Association of Physicists in Medicine has developed these tools and used them to formulate an example risk-based quality management program for intensity-modulated radiotherapy. This is a prospective risk assessment approach that analyzes potential error pathways inherent in a clinical process and then ranks them according to relative risk, typically before implementation, followed by the design of a new process or modification of the existing process. Appropriate controls are then put in place to ensure that failures are less likely to occur and, if they do, they will more likely be detected before they propagate through the process, compromising treatment outcome and causing harm to the patient. Such a prospective approach forms the basis of the work of Task Group 100 that has recently been approved by the AAPM. This session will be devoted to a discussion of these tools and practical examples of how these tools can be used in a given radiotherapy clinic to develop a risk based quality management program. Learning Objectives: Learn how to design a process map for a radiotherapy process Learn how to

TU-AB-BRD-02: Failure Modes and Effects Analysis

International Nuclear Information System (INIS)

Huq, M.

2015-01-01

Current quality assurance and quality management guidelines provided by various professional organizations are prescriptive in nature, focusing principally on performance characteristics of planning and delivery devices. However, published analyses of events in radiation therapy show that most events are often caused by flaws in clinical processes rather than by device failures. This suggests the need for the development of a quality management program that is based on integrated approaches to process and equipment quality assurance. Industrial engineers have developed various risk assessment tools that are used to identify and eliminate potential failures from a system or a process before a failure impacts a customer. These tools include, but are not limited to, process mapping, failure modes and effects analysis, fault tree analysis. Task Group 100 of the American Association of Physicists in Medicine has developed these tools and used them to formulate an example risk-based quality management program for intensity-modulated radiotherapy. This is a prospective risk assessment approach that analyzes potential error pathways inherent in a clinical process and then ranks them according to relative risk, typically before implementation, followed by the design of a new process or modification of the existing process. Appropriate controls are then put in place to ensure that failures are less likely to occur and, if they do, they will more likely be detected before they propagate through the process, compromising treatment outcome and causing harm to the patient. Such a prospective approach forms the basis of the work of Task Group 100 that has recently been approved by the AAPM. This session will be devoted to a discussion of these tools and practical examples of how these tools can be used in a given radiotherapy clinic to develop a risk based quality management program. Learning Objectives: Learn how to design a process map for a radiotherapy process Learn how to

Failure mode and effects analysis of software-based automation systems

International Nuclear Information System (INIS)

Haapanen, P.; Helminen, A.

2002-08-01

Failure mode and effects analysis (FMEA) is one of the well-known analysis methods having an established position in the traditional reliability analysis. The purpose of FMEA is to identify possible failure modes of the system components, evaluate their influences on system behaviour and propose proper countermeasures to suppress these effects. The generic nature of FMEA has enabled its wide use in various branches of industry reaching from business management to the design of spaceships. The popularity and diverse use of the analysis method has led to multiple interpretations, practices and standards presenting the same analysis method. FMEA is well understood at the systems and hardware levels, where the potential failure modes usually are known and the task is to analyse their effects on system behaviour. Nowadays, more and more system functions are realised on software level, which has aroused the urge to apply the FMEA methodology also on software based systems. Software failure modes generally are unknown - 'software modules do not fail, they only display incorrect behaviour' - and depend on dynamic behaviour of the application. These facts set special requirements on the FMEA of software based systems and make it difficult to realise. In this report the failure mode and effects analysis is studied for the use of reliability analysis of software-based systems. More precisely, the target system of FMEA is defined to be a safety-critical software-based automation application in a nuclear power plant, implemented on an industrial automation system platform. Through a literature study the report tries to clarify the intriguing questions related to the practical use of software failure mode and effects analysis. The study is a part of the research project 'Programmable Automation System Safety Integrity assessment (PASSI)', belonging to the Finnish Nuclear Safety Research Programme (FINNUS, 1999-2002). In the project various safety assessment methods and tools for

Improving failure analysis efficiency by combining FTA and FMEA in a recursive manner

NARCIS (Netherlands)

Peeters, J.F.W.; Basten, R.J.I.; Tinga, Tiedo

2018-01-01

When designing a maintenance programme for a capital good, especially a new one, it is of key importance to accurately understand its failure behaviour. Failure mode and effects analysis (FMEA) and fault tree analysis (FTA) are two commonly used methods for failure analysis. FMEA is a bottom-up

Improving failure analysis efficiency by combining FTA and FMEA in a recursive manner

NARCIS (Netherlands)

Peeters, J.F.W.; Basten, R.J.I.; Tinga, T.

When designing a maintenance programme for a capital good, especially a new one, it is of key importance to accurately understand its failure behaviour. Failure mode and effects analysis (FMEA) and fault tree analysis (FTA) are two commonly used methods for failure analysis. FMEA is a bottom-up

Reliability Evaluation of Machine Center Components Based on Cascading Failure Analysis

Science.gov (United States)

Zhang, Ying-Zhi; Liu, Jin-Tong; Shen, Gui-Xiang; Long, Zhe; Sun, Shu-Guang

2017-07-01

In order to rectify the problems that the component reliability model exhibits deviation, and the evaluation result is low due to the overlook of failure propagation in traditional reliability evaluation of machine center components, a new reliability evaluation method based on cascading failure analysis and the failure influenced degree assessment is proposed. A direct graph model of cascading failure among components is established according to cascading failure mechanism analysis and graph theory. The failure influenced degrees of the system components are assessed by the adjacency matrix and its transposition, combined with the Pagerank algorithm. Based on the comprehensive failure probability function and total probability formula, the inherent failure probability function is determined to realize the reliability evaluation of the system components. Finally, the method is applied to a machine center, it shows the following: 1) The reliability evaluation values of the proposed method are at least 2.5% higher than those of the traditional method; 2) The difference between the comprehensive and inherent reliability of the system component presents a positive correlation with the failure influenced degree of the system component, which provides a theoretical basis for reliability allocation of machine center system.

Description of the immature stages of the weevil Anthonomus vis Clark (Coleoptera, Curculionidae, inquiline into the gall of Leandra aurea (Melastomataceae

Directory of Open Access Journals (Sweden)

Daniela de Cassia Bená

2013-12-01

Full Text Available Description of the immature stages of the weevil Anthonomus vis Clark (Coleoptera, Curculionidae, inquiline into the gall of Leandra aurea (Melastomataceae. The third instar larva and the pupa of Anthonomus vis Clark, 1992 are described and illustrated, based upon specimens collected in the Serra de São José, Tiradentes, in Minas Gerais, southeastern Brazil. The species was previously known from the type series collected in the states of Amapá and Pará. Comparisons with the larva and pupa of A. grandis Boheman, 1843 and A. monostigma Champion, 1903 are included. The larvae of A. vis live as inquilines in the galls induced by a species of momphid moths (Lepidoptera, Momphidae in the stems of Leandra aurea (Cham. Cogn. (Melastomataceae.

Robustness Analysis of Real Network Topologies Under Multiple Failure Scenarios

DEFF Research Database (Denmark)

Manzano, M.; Marzo, J. L.; Calle, E.

2012-01-01

on topological characteristics. Recently approaches also consider the services supported by such networks. In this paper we carry out a robustness analysis of five real backbone telecommunication networks under defined multiple failure scenarios, taking into account the consequences of the loss of established......Nowadays the ubiquity of telecommunication networks, which underpin and fulfill key aspects of modern day living, is taken for granted. Significant large-scale failures have occurred in the last years affecting telecommunication networks. Traditionally, network robustness analysis has been focused...... connections. Results show which networks are more robust in response to a specific type of failure....

Analysis of dependent failures in risk assessment and reliability evaluation

International Nuclear Information System (INIS)

Fleming, K.N.; Mosleh, A.; Kelley, A.P. Jr.; Gas-Cooled Reactors Associates, La Jolla, CA)

1983-01-01

The ability to estimate the risk of potential reactor accidents is largely determined by the ability to analyze statistically dependent multiple failures. The importance of dependent failures has been indicated in recent probabilistic risk assessment (PRA) studies as well as in reports of reactor operating experiences. This article highlights the importance of several different types of dependent failures from the perspective of the risk and reliability analyst and provides references to the methods and data available for their analysis. In addition to describing the current state of the art, some recent advances, pitfalls, misconceptions, and limitations of some approaches to dependent failure analysis are addressed. A summary is included of the discourse on this subject, which is presented in the Institute of Electrical and Electronics Engineers/American Nuclear Society PRA Procedures Guide

Evaluating the Antimicrobial Activity of Methonolic Extract of Rhus Succedanea Leaf Gall

Directory of Open Access Journals (Sweden)

Savitri Shrestha

2013-12-01

Full Text Available Introduction: The worldwide increased bacterial resistance to antibiotics and the undesirable side effects associated with constant use of synthetic drugs has prompted the search for novel antimicrobial agents, particularly those manufactured from plants. This study is designed to ascertain the antibacterial potential of Rhus succedanea leaf gall extracts on the growth of gram-positive and gram–negative bacteria. Methods: The methanolic and hexane extract of different concentrations (100, 250, and 500 μg/ml were prepared and their antibacterial efficacy was tested against clinical isolates of Escherichia coli, Salmonella typhi, Micrococcus luteus, and Staphylococcus aureus using agar well diffusion method and the size of inhibition zone was measured in millimeters. Results: The methanol and hexane extracts differed significantly in their antimicrobial activity with methanol extract showing a potent inhibitory activity in the range of 16±2 to 23±1, which was almost equal to the values of ciprofloxacin (25±3, used as a standard. Further, the methanol extract was mostly potent and effective in inhibiting the growth of gram-negative bacteria, namely, E. coli, when compared to gram –positive bacteria stains, which are responsible for antimicrobial activities. The phytochemical screening showed positive results for the presence of steroids, triterpenes, alkaloids, and carbohydrates. Conclusion: The potent antibacterial activity of Rhus succedanea leaf gall extracts indicates its useful therapeutic application against bacterial infection. Furthermore, this study indicates that the extract might be exploited as natural drug for the treatment of infectious diseases and could be useful in understanding the relations between traditional cures and current medications.

Reliability analysis of multi-trigger binary systems subject to competing failures

International Nuclear Information System (INIS)

Wang, Chaonan; Xing, Liudong; Levitin, Gregory

2013-01-01

This paper suggests two combinatorial algorithms for the reliability analysis of multi-trigger binary systems subject to competing failure propagation and failure isolation effects. Propagated failure with global effect (PFGE) is referred to as a failure that not only causes outage to the component from which the failure originates, but also propagates through all other system components causing the entire system failure. However, the propagation effect from the PFGE can be isolated in systems with functional dependence (FDEP) behavior. This paper studies two distinct consequences of PFGE resulting from a competition in the time domain between the failure isolation and failure propagation effects. As compared to existing works on competing failures that are limited to systems with a single FDEP group, this paper considers more complicated cases where the systems have multiple dependent FDEP groups. Analysis of such systems is more challenging because both the occurrence order between the trigger failure event and PFGE from the dependent components and the occurrence order among the multiple trigger failure events have to be considered. Two combinatorial and analytical algorithms are proposed. Both of them have no limitation on the type of time-to-failure distributions for the system components. Their correctness is verified using a Markov-based method. An example of memory systems is analyzed to demonstrate and compare the applications and advantages of the two proposed algorithms. - Highlights: ► Reliability of binary systems with multiple dependent functional dependence groups is analyzed. ► Competing failure propagation and failure isolation effect is considered. ► The proposed algorithms are combinatorial and applicable to any arbitrary type of time-to-failure distributions for system components.

Recognition and Analysis of Corrosion Failure Mechanisms

Directory of Open Access Journals (Sweden)

Steven Suess

2006-02-01

Full Text Available Corrosion has a vast impact on the global and domestic economy, and currently incurs losses of nearly $300 billion annually to the U.S. economy alone. Because of the huge impact of corrosion, it is imperative to have a systematic approach to recognizing and mitigating corrosion problems as soon as possible after they become apparent. A proper failure analysis includes collection of pertinent background data and service history, followed by visual inspection, photographic documentation, material evaluation, data review and conclusion procurement. In analyzing corrosion failures, one must recognize the wide range of common corrosion mechanisms. The features of any corrosion failure give strong clues as to the most likely cause of the corrosion. This article details a proven approach to properly determining the root cause of a failure, and includes pictographic illustrations of the most common corrosion mechanisms, including general corrosion, pitting, galvanic corrosion, dealloying, crevice corrosion, microbiologically-influenced corrosion (MIC, corrosion fatigue, stress corrosion cracking (SCC, intergranular corrosion, fretting, erosion corrosion and hydrogen damage.

Production of anticandidal cotton textiles treated with oak gall extract

Directory of Open Access Journals (Sweden)

Ahmed A. Tayel

Full Text Available Candida albicans, one of the most dreadful fungal pathogens threatening humans, could not be easily prevented. The anticandidal activity of oak gall extract, Quercus infectoria (QIE, was investigated as a potential natural alternative to synthetic and chemical fungicides. QIE anticandidal potentiality was confirmed using both qualitative and quantitative assays. Cotton textiles were treated with QIE and then evaluated as anticandidal fabrics. QIE-treated textiles had a potent anticandidal activity, which could completely inhibit the inoculated C. albicans cells. The durability of anticandidal activity in QIE-treated textiles almost completely disappeared after the fourth laundering cycle. QIE could be recommended, however, as a potent anticandidal agent for preparing antiseptic solutions and emulsions and as a finishing agent for manufacturing anticandidal disposable diapers and hygienic clothes.

Propagated failure analysis for non-repairable systems considering both global and selective effects

International Nuclear Information System (INIS)

Wang Chaonan; Xing Liudong; Levitin, Gregory

2012-01-01

This paper proposes an algorithm for the reliability analysis of non-repairable binary systems subject to competing failure propagation and failure isolation events with both global and selective failure effects. A propagated failure that originates from a system component causes extensive damage to the rest of the system. Global effect happens when the propagated failure causes the entire system to fail; whereas selective effect happens when the propagated failure causes only failure of a subset of system components. In both cases, the failure propagation that originates from some system components (referred to as dependent components) can be isolated because of functional dependence between the dependent components and a component that prevents the failure propagation (trigger components) when the failure of the trigger component happens before the occurrence of the propagated failure. Most existing studies focus on the analysis of propagated failures with global effect. However, in many cases, propagated failures affect only a subset of system components not the entire system. Existing approaches for analyzing propagated failures with selective effect are limited to series-parallel systems. This paper proposes a combinatorial method for the propagated failure analysis considering both global and selective effects as well as the competition with the failure isolation in the time domain. The proposed method is not limited to series-parallel systems and has no limitation on the type of time-to-failure distributions for the system components. The method is verified using the Markov-based method. An example of computer memory systems is analyzed to demonstrate the application of the proposed method.

System reliability analysis using dominant failure modes identified by selective searching technique

International Nuclear Information System (INIS)

Kim, Dong-Seok; Ok, Seung-Yong; Song, Junho; Koh, Hyun-Moo

2013-01-01

The failure of a redundant structural system is often described by innumerable system failure modes such as combinations or sequences of local failures. An efficient approach is proposed to identify dominant failure modes in the space of random variables, and then perform system reliability analysis to compute the system failure probability. To identify dominant failure modes in the decreasing order of their contributions to the system failure probability, a new simulation-based selective searching technique is developed using a genetic algorithm. The system failure probability is computed by a multi-scale matrix-based system reliability (MSR) method. Lower-scale MSR analyses evaluate the probabilities of the identified failure modes and their statistical dependence. A higher-scale MSR analysis evaluates the system failure probability based on the results of the lower-scale analyses. Three illustrative examples demonstrate the efficiency and accuracy of the approach through comparison with existing methods and Monte Carlo simulations. The results show that the proposed method skillfully identifies the dominant failure modes, including those neglected by existing approaches. The multi-scale MSR method accurately evaluates the system failure probability with statistical dependence fully considered. The decoupling between the failure mode identification and the system reliability evaluation allows for effective applications to larger structural systems

Insetos indutores de galhas da porção sul da Cadeia do Espinhaço, Minas Gerais, Brasil Gall inducing insects from southern portion of the Espinhaço Range, Minas Gerais, Brazil

Directory of Open Access Journals (Sweden)

Marco Antonio A. Carneiro

2009-12-01

Full Text Available A riqueza de insetos galhadores é maior nas latitudes intermediárias em hábitats quentes e com vegetação esclerófila sob estresse hídrico e de nutrientes. Em regiões tropicais, os campos rupestres são indicados como hábitats ricos em espécies de insetos galhadores. Neste trabalho, foram descritas as galhas induzidas por insetos e suas plantas hospedeiras na porção sul da Cadeia do Espinhaço, sudeste do Brasil. Foram selecionados 60 sítios em seis regiões ao longo na porção sul da Cadeia do Espinhaço no estado de Minas Gerais. Em cada sítio 100 plantas foram amostradas totalizando 6.000 plantas censuradas ao longo de um gradiente altitudinal de 668 a 1860m. Foram encontrados 241 morfotipos de galhas em 142 espécies de plantas distribuídas em 29 famílias e de um total de 384 espécies de plantas amostradas. As famílias mais ricas em espécies de insetos galhadores foram Asteraceae (42%, principalmente espécies do gênero Baccharis. A maior parte das galhas (85% foi induzida por insetos da família Cecidomyiidae seguidos por Lepidoptera (4% e Homoptera (3%. Os ramos foram os órgãos mais freqüentemente atacados (72% enquanto que os morfotipos mais comuns foram o elíptico (37% e o globóide (36%. A espécie de planta hospedeira que apresentou mais morfotipos de galhas foi Baccharis pseudomyriocephala com 10 galhas distintas. Este estudo sustenta a afirmativa que campos rupestres apresentam uma elevada riqueza em espécies de insetos galhadores.Galling species richness is higher at intermediate latitudes on warm habitats and sclerophyllous vegetation under water and nutrient stress. In the tropical region, galling species richness is higher in rupestrian fields. Here the gall-inducing insects and their host plants of the southern portion of the Espinhaço range, southeastern Brazil are described. 60 study sites from six distinct regions along the Espinhaço range, at Minas Gerais state were selected. In each study site 100

An extended chemical analysis of gallstone.

Science.gov (United States)

Chandran, P; Kuchhal, N K; Garg, P; Pundir, C S

2007-09-01

Chemical composition of gall stones is essential for aetiopathogensis of gallstone disease. We have reported quantitative chemical analysis of total cholesterol bilirubin, calcium, iron and inorganic phosphate in 120 gallstones from haryana. To extend this chemical analysis of gall stones by studying more cases and by analyzing more chemical constituents. A quantitative chemical analysis of total cholesterol, total bilirubin, fatty acids, triglycerides, phospholipids, bile acids, soluble proteins, sodium potassium, magnesium, copper, oxalate and chlorides of biliary calculi (52 cholesterol, 76 mixed and 72 pigment) retrieved from surgical operation of 200 patients from Haryana state was carried out. Total cholesterol as the major component and total bilirubin, phospholipids, triglycerides, bile acids, fatty acids (esterified), soluble protein, calcium, magnesium, iron, copper, sodium, potassium, inorganic phosphate, oxalate and chloride as minor components were found in all types of calculi. The cholesterol stones had higher content of total cholesterol, phospholipids, fatty acids (esterified), inorganic phosphate and copper compared to mixed and pigment stones. The mixed stones had higher content of iron and triglycerides than to cholesterol and pigment stones. The pigment stones were richer in total bilirubin, bile acids, calcium, oxalate, magnesium, sodium, potassium, chloride and soluble protein compared to cholesterol and mixed stones. Although total cholesterol was a major component of cholesterol, mixed and pigment gall stone in Haryana, the content of most of the other lipids, cations and anions was different in different gall stones indicating their different mechanism of formation.

The study of Influencing Maintenance Factors on Failures of Two gypsum Kilns by Failure Modes and Effects Analysis (FMEA

Directory of Open Access Journals (Sweden)

Iraj Alimohammadi

2014-06-01

Full Text Available Developing technology and using equipment in Iranian industries caused that maintenance system would be more important to use. Using proper management techniques not only increase the performance of production system but also reduce the failures and costs. The aim of this study was to determine the quality of maintenance system and the effects of its components on failures of kilns in two gypsum production companies using Failure Modes and Effects Analysis (FMEA. Furthermore the costs of failures were studied. After the study of gypsum production steps in the factories, FMEA was conducted by the determination of analysis insight, information gathering, making list of kilns’ component and filling up the FMEA’s tables. The effects of failures on production, how to fail, failure rate, failure severity, and control measures were studied. The evaluation of maintenance system was studied by a check list including questions related to system components. The costs of failures were determined by refer in accounting notebooks and interview with the head of accounting department. It was found the total qualities of maintenance system in NO.1 was more than NO.2 but because of lower quality of NO.1’s kiln design, number of failures and their costs were more. In addition it was determined that repair costs in NO.2’s kiln were about one third of NO.1’s. The low severity failures caused the most costs in comparison to the moderate and low ones. The technical characteristics of kilns were appeared to be the most important factors in reducing of failures and costs.

Failure criterion of concrete type material and punching failure analysis of thick mortar plate

International Nuclear Information System (INIS)

Ohno, T.; Kuroiwa, M.; Irobe, M.

1979-01-01

In this paper falure surface of concrete type material is proposed and its validity to structural analysis is examined. The study is an introductory part of evaluation for ultimate strength of reinforced and prestressed concrete structures in reactor technology. The failure surface is expressed in a linear form in terms of octahedral normal and shear stresses. Coefficient of the latter stress is given by a trigonometric series in threefold angle of similarity. Hence, its meridians are multilinear and traces of its deviatoric sections are smooth curves having periodicity of 2π/3 around space diagonal in principal stress space. The mathematical expression of the surface has an arbitraty number of parameters so that material test results are well reflected. To confirm the effectiveness of proposed failure criterion, experiment and numerical analysis by the finite element method on punching failure of thick mortar plate in axial symmetry are compared. In the numerical procedure yield surface of the material is assumed to exist mainly in compression region, since a brittle cleavage or elastic fracture occurs in the concrete type material under stress state with tension, while a ductile or plastic fracture occurs under compressive stress state. (orig.)

Ketamine-associated CT findings of damage in liver and gall and urinary system

International Nuclear Information System (INIS)

Zhang Keyun; Wang Lijuan; Wang Jiajun; Cheng Kuishan; Chen Aidi; Xu Dasheng

2011-01-01

Objective: To investigate the image signs of damage e in urinary system and liver and gall system and diagnostic value of CT findings in abuse of ketamine. Methods: With ethics committee approval, a retrospective analysis of 10 patients with a history of taking K powder (1 to 10 years) was done with abdominal CT scan and enhanced scan data to analysis the imaging findings of ketamine-related abdominal organ damage. Results: CT images of the 10 patients showed different degrees of reduced bladder capacity, bladder wall thickening range of 3∼14 mm. Of which the wall were thickened on both sides with the waist-shaped in 5 patients. Bilateral hydronephrosis and hydroureterosis was found in 3 cases with uniform wall thickening of both ureters. 4 cases of renal multi-lesion papillary necrosis was found, of which 2 patients showed multi-lesion ischemic changes in renal parenchyma in both kidneys. Expansion of the common bile duct appeared in 3 cases, of which 2 cases with merger intrahepatic bile duct dilation. Conclusion: CT findings of ketamine associated abdominal organ injuries in the bladder and renal may have certain characteristics. It is helpful to make diagnosis with the combination of favorable clinical data and medical history. (authors)

Innervation of Extrahepatic Biliary Tract, With Special Reference to the Direct Bidirectional Neural Connections of the Gall Bladder, Sphincter of Oddi and Duodenum in Suncus murinus, in Whole-Mount Immunohistochemical Study.

Science.gov (United States)

Yi, S-Q; Ren, K; Kinoshita, M; Takano, N; Itoh, M; Ozaki, N

2016-06-01

Sphincter of Oddi dysfunction is one of the most important symptoms in post-cholecystectomy syndrome. Using either electrical or mechanical stimulation and retrogradely transported neuronal dyes, it has been demonstrated that there are direct neural pathways connecting gall bladder and the sphincter of Oddi in the Australian opossum and the golden hamster. In the present study, we employed whole-mount immunohistochemistry staining to observe and verify that there are two different plexuses of the extrahepatic biliary tract in Suncus murinus. One, named Pathway One, showed a fine, irregular but dense network plexus that ran adhesively and resided on/in the extrahepatic biliary tract wall, and the plexus extended into the intrahepatic area. On the other hand, named Pathway Two, exhibiting simple, thicker and straight neural bundles, ran parallel to the surface of the extrahepatic biliary tract and passed between the gall bladder and duodenum, but did not give off any branches to the liver. Pathway Two was considered to involve direct bidirectional neural connections between the duodenum and the biliary tract system. For the first time, morphologically, we demonstrated direct neural connections between gall bladder and duodenum in S. murinus. Malfunction of the sphincter of Oddi may be caused by injury of the direct neural pathways between gall bladder and duodenum by cholecystectomy. From the viewpoint of preserving the function of the major duodenal papilla and common bile duct, we emphasize the importance of avoiding kocherization of the common bile duct so as to preserve the direct neural connections between gall bladder and sphincter of Oddi. © 2015 Blackwell Verlag GmbH.

Common Cause Failure Analysis for the Digital Plant Protection System

International Nuclear Information System (INIS)

Kagn, Hyun Gook; Jang, Seung Cheol

2005-01-01

Safety-critical systems such as nuclear power plants adopt the multiple-redundancy design in order to reduce the risk from the single component failure. The digitalized safety-signal generation system is also designed based on the multiple-redundancy strategy which consists of more redundant components. The level of the redundant design of digital systems is usually higher than those of conventional mechanical systems. This higher redundancy would clearly reduce the risk from the single failure of components, but raise the importance of the common cause failure (CCF) analysis. This research aims to develop the practical and realistic method for modeling the CCF in digital safety-critical systems. We propose a simple and practical framework for assessing the CCF probability of digital equipment. Higher level of redundancy causes the difficulty of CCF analysis because it results in impractically large number of CCF events in the fault tree model when we use conventional CCF modeling methods. We apply the simplified alpha-factor (SAF) method to the digital system CCF analysis. The precedent study has shown that SAF method is quite realistic but simple when we consider carefully system success criteria. The first step for using the SAF method is the analysis of target system for determining the function failure cases. That is, the success criteria of the system could be derived from the target system's function and configuration. Based on this analysis, we can calculate the probability of single CCF event which represents the CCF events resulting in the system failure. In addition to the application of SAF method, in order to accommodate the other characteristics of digital technology, we develop a simple concept and several equations for practical use

L’INSEGNAMENTO DELLE SCIENZE IN EUROPA: ASPETTI LINGUISTICI A CONFRONTO (ITALIA, DANIMARCA, GALLES

Directory of Open Access Journals (Sweden)

Silvia Marianna Bollone

2015-02-01

Full Text Available La componente linguistica riveste un ruolo prioritario nell’insegnamento-apprendimento delle scienze, specificamente prescritto dai programmi scolastici attualmente vigenti in Europa e pienamente accolto dalle Indicazioni nazionali per il curricolo della scuola dell'infanzia e del primo ciclo d’istruzione, di cui D.M. 254/2012. Il presente lavoro intende indagare l’incidenza dell’aspetto linguistico-comunicativo nel processo di insegnamento-apprendimento delle scienze nell’ambito di tre differenti contesti europei: l’Italia, la Danimarca e il Galles, nella fascia di età compresa all’incirca tra gli 11 e 14 anni, corrispondente per l’Italia alla Scuola secondaria di primo grado, per la Danimarca ad un segmento della Folkeskole, e per il Galles alla fase iniziale della Secondary School. La ricerca, incentrata su uno specifico argomento del programma di scienze comune ai tre sistemi scolastici, prevede un’analisi dei programmi ministeriali, delle programmazioni degli insegnanti, dei manuali in uso nelle scuole, nell’intento di definire il ruolo assegnato agli aspetti linguistici nell’insegnamento delle scienze sia livello legislativo-istituzionale che nella quotidiana pratica didattica.  Teaching science in Europe: language issues compared (Italy, Denmark, Wales The linguistic component plays a major role in the teaching and learning of science, specifically prescribed by the curriculum currently in force in Europe and fully supported by the National Guidelines for the curriculum in kindergarten and the first cycle of education, regulated by DM 254/2012. This paper aims to investigate the linguistic-communicative impact in the process of teaching and learning science in three different European contexts: Italy, Denmark and Wales in children aged 11 to 14, corresponding in Italy to Middle school, in Denmark to a segment of the Folkeskole, and in Wales to the initial phase of the Secondary school. The research focused on a

Signal analysis for failure detection

International Nuclear Information System (INIS)

Parpaglione, M.C.; Perez, L.V.; Rubio, D.A.; Czibener, D.; D'Attellis, C.E.; Brudny, P.I.; Ruzzante, J.E.

1994-01-01

Several methods for analysis of acoustic emission signals are presented. They are mainly oriented to detection of changes in noisy signals and characterization of higher amplitude discrete pulses or bursts. The aim was to relate changes and events with failure, crack or wear in materials, being the final goal to obtain automatic means of detecting such changes and/or events. Performance evaluation was made using both simulated and laboratory test signals. The methods being presented are the following: 1. Application of the Hopfield Neural Network (NN) model for classifying faults in pipes and detecting wear of a bearing. 2. Application of the Kohonnen and Back Propagation Neural Network model for the same problem. 3. Application of Kalman filtering to determine time occurrence of bursts. 4. Application of a bank of Kalman filters (KF) for failure detection in pipes. 5. Study of amplitude distribution of signals for detecting changes in their shape. 6. Application of the entropy distance to measure differences between signals. (author). 10 refs, 11 figs

NDT in failure analysis - some case studies [Paper IIIA-g

International Nuclear Information System (INIS)

Raj, Baldev; Bhattacharya, D.K.; Lopez, E.C.; Jayakumar, T.

1986-01-01

The effective uses of several non-destructive techniques in failure analysis are discussed. The techniques considered are: dye penetrant testing, radiography, ultrasonic testing, hardness measurement and in-situ metallography. A few failure cases are discussed to highlight the usefulness of the techniques. (author)

[Hazard function and life table: an introduction to the failure time analysis].

Science.gov (United States)

Matsushita, K; Inaba, H

1987-04-01

Failure time analysis has become popular in demographic studies. It can be viewed as a part of regression analysis with limited dependent variables as well as a special case of event history analysis and multistate demography. The idea of hazard function and failure time analysis, however, has not been properly introduced to nor commonly discussed by demographers in Japan. The concept of hazard function in comparison with life tables is briefly described, where the force of mortality is interchangeable with the hazard rate. The basic idea of failure time analysis is summarized for the cases of exponential distribution, normal distribution, and proportional hazard models. The multiple decrement life table is also introduced as an example of lifetime data analysis with cause-specific hazard rates.

A Big Data Analysis Approach for Rail Failure Risk Assessment.

Science.gov (United States)

Jamshidi, Ali; Faghih-Roohi, Shahrzad; Hajizadeh, Siamak; Núñez, Alfredo; Babuska, Robert; Dollevoet, Rolf; Li, Zili; De Schutter, Bart

2017-08-01

Railway infrastructure monitoring is a vital task to ensure rail transportation safety. A rail failure could result in not only a considerable impact on train delays and maintenance costs, but also on safety of passengers. In this article, the aim is to assess the risk of a rail failure by analyzing a type of rail surface defect called squats that are detected automatically among the huge number of records from video cameras. We propose an image processing approach for automatic detection of squats, especially severe types that are prone to rail breaks. We measure the visual length of the squats and use them to model the failure risk. For the assessment of the rail failure risk, we estimate the probability of rail failure based on the growth of squats. Moreover, we perform severity and crack growth analyses to consider the impact of rail traffic loads on defects in three different growth scenarios. The failure risk estimations are provided for several samples of squats with different crack growth lengths on a busy rail track of the Dutch railway network. The results illustrate the practicality and efficiency of the proposed approach. © 2017 The Authors Risk Analysis published by Wiley Periodicals, Inc. on behalf of Society for Risk Analysis.

Pattern of attack of a galling insect reveals an unexpected preference-performance linkage on medium-sized resources Padrão de ataque de um inseto galhador revela uma inesperada ligação entre preferência e performance sobre recursos de tamanho médio

Directory of Open Access Journals (Sweden)

Jean C. Santos

2010-03-01

Full Text Available Pattern of attack of a galling insect reveals an unexpected preference-performance linkage on medium-sized resources. The Plant Vigor Hypothesis (PVH predicts oviposition preference and higher offspring performance on longer and fast-growing shoots, and although several studies have tested its predictions, long-term studies concerning the patterns of host selection by galling species are still lacking. The PVH was tested in this study using Bauhinia brevipes (Fabaceae as the host of a leaf gall midge, Asphondylia microcapillata (Diptera, Cecidomyiidae during three consecutive years. Shoots were collected from the same 80 plants between 2001 and 2003 and shoot length, number of healthy and galled leaves, gall number, and mortality factors were recorded. Nearly 600 galls were found on the 5,800 shoots collected. Medium-sized shoots supported from 46 to 70% of all galls, with greater gall survival rate in 2002 and 2003. A decrease in parasitism rate coupled with an increase in gall predation lead to a constant similar gall survivorship rate in all years (x = 22.7%. Although gall abundance varied among years (122 in 2001, 114 in 2002 and 359 in 2003 preference for longer shoots was not observed because the percentage of galled shoots and galled leaves were higher on medium shoot length classes in all years. The observed distribution of gall abundance and galled shoots were always greater than the expected distribution on medium shoot length classes. These findings do not support the PVH, and show that A. microcapillata can maximize the female preference and larval performance on medium-sized shoots of B. brevipes.A Hipótese do Vigor de Plantas (HVP prevê uma oviposição preferencial e alta performance da prole em ramos longos e de crescimento rápido da planta hospedeira. Embora diversos estudos tenham testado suas predições, estudos de longa duração focados no padrão de seleção de planta hospedeira por insetos galhadores ainda s

Failure analysis of PB-1 (EBTS Be/Cu mockup)

International Nuclear Information System (INIS)

Odegard, B.C. Jr.; Cadden, C.H.

1996-11-01

Failure analysis was done on PB-1 (series of Be tiles joined to Cu alloy) following a tile failure during a high heat flux experiment in EBTS (electron beam test system). This heat flux load simulated ambient conditions inside ITER; the Be tiles were bonded to the Cu alloy using low-temperature diffusion bonding, which is being considered for fabricating plasma facing components in ITER. Results showed differences between the EBTS failure and a failure during a room temperature tensile test. The latter occurred at the Cu-Be interface in an intermetallic phase formed by reaction of the two metals at the bonding temperature. Fracture strengths measured by these tests were over 300 MPa. The high heat flux specimens failed at the Cu-Cu diffusion bond. Fracture morphology in both cases was a mixed mode of dimple rupture and transgranular cleavage. Several explanations for this difference in failure mechanism are suggested

Sequentially linear analysis for simulating brittle failure

NARCIS (Netherlands)

van de Graaf, A.V.

2017-01-01

The numerical simulation of brittle failure at structural level with nonlinear finite
element analysis (NLFEA) remains a challenge due to robustness issues. We attribute these problems to the dimensions of real-world structures combined with softening behavior and negative tangent stiffness at

The Efficient Extraction of Phenolic Compounds from Oak Gall Using a Miniaturized Matrix Solid-Phase Dispersion Method before their HPLC Determination

Directory of Open Access Journals (Sweden)

Ahmad Daneshfar

2017-06-01

Conclusion: The proposed technique is simple and fast. It substantially reduced the amounts of sample, sorbent and organic solvents required for the extraction. The maximum amounts of the phenolic compounds were found in Qalqaf and Bramazu galls.

Lower head failure analysis

International Nuclear Information System (INIS)

Rempe, J.L.; Thinnes, G.L.; Allison, C.M.; Cronenberg, A.W.

1991-01-01

The US Nuclear Regulatory Commission is sponsoring a lower vessel head research program to investigate plausible modes of reactor vessel failure in order to determine (a) which modes have the greatest likelihood of occurrence during a severe accident and (b) the range of core debris and accident conditions that lead to these failures. This paper presents the methodology and preliminary results of an investigation of reactor designs and thermodynamic conditions using analytic closed-form approximations to assess the important governing parameters in non-dimensional form. Preliminary results illustrate the importance of vessel and tube geometrical parameters, material properties, and external boundary conditions on predicting vessel failure. Thermal analyses indicate that steady-state temperature distributions will occur in the vessel within several hours, although the exact time is dependent upon vessel thickness. In-vessel tube failure is governed by the tube-to-debris mass ratio within the lower head, where most penetrations are predicted to fail if surrounded by molten debris. Melt penetration distance is dependent upon the effective flow diameter of the tube. Molten debris is predicted to penetrate through tubes with a larger effective flow diameter, such as a boiling water reactor (BWR) drain nozzle. Ex-vessel tube failure for depressurized reactor vessels is predicted to be more likely for a BWR drain nozzle penetration because of its larger effective diameter. At high pressures (between ∼0.1 MPa and ∼12 MPa) ex-vessel tube rupture becomes a dominant failure mechanism, although tube ejection dominates control rod guide tube failure at lower temperatures. However, tube ejection and tube rupture predictions are sensitive to the vessel and tube radial gap size and material coefficients of thermal expansion

Impact of a gall midge Parkiamyia paraensis (Diptera, Cecidomyiidae on the Amazonian plant Parkia pendula (Fabaceae Impacto do galhador Parkiamyia paraensis (Diptera, Cecidomyiidae sobre a planta da Amazônia Parkia pendula Benth. ex Walp. (Fabaceae

Directory of Open Access Journals (Sweden)

G. Wilson Fernandes

2007-12-01

Full Text Available We observed the occurrence of large numbers of galls induced by Parkiamyia paraensis (Diptera, Cecidomyiidae on the leaflets of Parkia pendula (Fabaceae in northern Para, Brazil. We addressed two questions in this study: i what is the proportion of attacked plants in the field, and nursery conditions?; and ii what is the impact of galls on the host plant? An average of 86% of the plants were galled in the field. Galled P. pendula were distinct from healthy individuals due to their prostrated architecture and death of terminal shoots. Approximately 50% of the total available leaves and 35% leaflets were attacked by P. paraensis on saplings under nursery conditions. Each one-year old plant supported an average of 1,300 galls, and an average of 60g allocated to galled tissue. Otherwise, attacked individuals were taller and heavier than healthy plants. Attacked plants weighed five times more than healthy plants. When the weight of the galls was removed, the total weight (aerial part without galls of attacked plants was drastically reduced, indicating that most of the biomass of attacked plants was due to the attack by P. paraensis galls. Although the data indicate a paradox, as young plants attacked by the galling herbivore appear to develop more vigorously than unattacked plants, we suggest that P. paraensis negatively affect P. pendula development.Observou-se a ocorrência de um grande número de galhas induzidas por Parkiamyia paraensis (Diptera, Cecidomyiidae nos folíolos de Parkia pendula (Fabaceae no norte do Pará, Brasil. Este estudo foi direcionado para responder duas perguntas: i qual é a proporção de plantas atacadas no campo e em condições de estufa? e ii qual é o impacto das galhas na planta hospedeira? Uma média de 86% das plantas apresentaram galhas no campo. Indivíduos com galhas de P. pendula eram distintos dos indivíduos saudáveis devido à arquitetura curvada e pela morte dos ramos terminais. Aproximadamente 50% do

Failure analysis of buried tanks

International Nuclear Information System (INIS)

Watkins, R.K.

1994-01-01

Failure of a buried tank can be hazardous. Failure may be a leak through which product is lost from the tank; but also through which contamination can occur. Failures are epidemic -- because buried tanks are out of sight, but also because designers of buried tanks have adopted analyses developed for pressure tanks. So why do pressure tanks fail when they are buried? Most failures of buried tanks are really soil failures. Soil compresses, or slips, or liquefies. Soil is not only a load, it is a support without which the tank deforms. A high water table adds to the load on the tank. It also reduces the strength of the soil. Based on tests, structural analyses are proposed for empty tanks buried in soils of various quality, with the water table at various levels, and with internal vacuum. Failure may be collapse tank. Such collapse is a sudden, audible inversion of the cylinder when the sidefill soil slips. Failure may be flotation. Failure may be a leak. Most leaks are fractures in the welds in overlap seams at flat spots. Flat spots are caused by a hard bedding or a heavy surface wheel load. Because the tank wall is double thick at the overlap, shearing stress in the weld is increased. Other weld failures occur when an end plate shears down past a cylinder; or when the tank is supported only at its ends like a beam. These, and other, failures can be analyzed with justifiable accuracy using basic principles of mechanics of materials. 10 figs

Reliability test and failure analysis of high power LED packages

International Nuclear Information System (INIS)

Chen Zhaohui; Zhang Qin; Wang Kai; Luo Xiaobing; Liu Sheng

2011-01-01

A new type application specific light emitting diode (LED) package (ASLP) with freeform polycarbonate lens for street lighting is developed, whose manufacturing processes are compatible with a typical LED packaging process. The reliability test methods and failure criterions from different vendors are reviewed and compared. It is found that test methods and failure criterions are quite different. The rapid reliability assessment standards are urgently needed for the LED industry. 85 0 C/85 RH with 700 mA is used to test our LED modules with three other vendors for 1000 h, showing no visible degradation in optical performance for our modules, with two other vendors showing significant degradation. Some failure analysis methods such as C-SAM, Nano X-ray CT and optical microscope are used for LED packages. Some failure mechanisms such as delaminations and cracks are detected in the LED packages after the accelerated reliability testing. The finite element simulation method is helpful for the failure analysis and design of the reliability of the LED packaging. One example is used to show one currently used module in industry is vulnerable and may not easily pass the harsh thermal cycle testing. (semiconductor devices)

Statistical analysis of nuclear power plant pump failure rate variability: some preliminary results

International Nuclear Information System (INIS)

Martz, H.F.; Whiteman, D.E.

1984-02-01

In-Plant Reliability Data System (IPRDS) pump failure data on over 60 selected pumps in four nuclear power plants are statistically analyzed using the Failure Rate Analysis Code (FRAC). A major purpose of the analysis is to determine which environmental, system, and operating factors adequately explain the variability in the failure data. Catastrophic, degraded, and incipient failure severity categories are considered for both demand-related and time-dependent failures. For catastrophic demand-related pump failures, the variability is explained by the following factors listed in their order of importance: system application, pump driver, operating mode, reactor type, pump type, and unidentified plant-specific influences. Quantitative failure rate adjustments are provided for the effects of these factors. In the case of catastrophic time-dependent pump failures, the failure rate variability is explained by three factors: reactor type, pump driver, and unidentified plant-specific influences. Finally, point and confidence interval failure rate estimates are provided for each selected pump by considering the influential factors. Both types of estimates represent an improvement over the estimates computed exclusively from the data on each pump

Antioxidant, mutagenic and antimutagenic activities of an aqueous extract of Limoniastrum guyonianum gall.

Science.gov (United States)

Krifa, Mounira; Bouhlel, Ines; Skandrani, Ines; Chekir-Ghedira, Leila; Ghedira, Kamel

2014-01-01

An aqueous extract of Limoniastrum guyonianum gall (G extract) was tested on Salmonella typhimurium to assess its mutagenic and antimutagenic effects. This extract showed no mutagenicity when tested with S. typhimurium strain TA104 either with or without exogenous metabolic activation mixture (S9), whereas our findings revealed that the aqueous gall extract induced a mutagenic effect in S. typhimurium TA1538 when tested in the presence, as well as in the absence, of S9 activation mixture at the concentration of 500 µg/mL. Thus, the same concentration produced a mutagenic effect, when incubated with S. typhimurium TA100 in the presence of metabolic activation mixture. In contrast, our results showed a weak antimutagenic potential of the same extract against sodium azide in the presence of S. typhimurium TA100 and S. typhimurium TA1538 without metabolic activation (S9), whereas, in the presence of S. typhimurium TA104, we obtained a significant inhibition percentage (76.39%) toward 3.25 µg/plate of methylmethanesulfonate. Antimutagenicity against aflatoxin B1, 4-nitro-o-phenylene-diamine and 2-aminoanthracène was significant, with an inhibition percentage of, respectively, 70.63, 99.3 and 63.37% in the presence of, respectively, S. typhimurium TA100, S. typhimurium TA1538 and S. typhimurium TA104 strains at a concentration of 250 µg/plate after metabolic activation (S9). Antioxidant capacity of the tested extract was evaluated using the enzymatic (xanthine/xanthine oxidase assay) and the nonenzymatic (2,2-diphenyl-1-picrylhydrazyl) system. G extract exhibited high antioxidant activity.

Percutaneous transhepatic recanalization of malignant hilarobstruction: A possible rescue for early failure of endoscopic y-stenting

Energy Technology Data Exchange (ETDEWEB)

Kwon, Hoon; Kim, Chang Won; Lee, Tae Hong; Kim, Dong Uk [Pusan National University School of Medicine, Pusan National University Hospital, Busan (Korea, Republic of); Jeon, Ung Bae; Kang, Dae Hwan [Pusan National University School of Medicine, Yangsan Pusan National University Hospital, Yangsan (Korea, Republic of)

2013-11-15

Endoscopic biliary stenting is well known as an optimal method of management of malignant hilar obstruction, but sometimes the result is not satisfactory, with early stent failure. Percutaneous transhepatic biliary drainage (PTBD) has a distinct advantage over endoscopic retrograde cholangiopancreatoscopy in that with ultrasound guidance one or more appropriate segments for drainage can be chosen. We evaluated the effectiveness of percutaneous transhepatic stenting as a rescue of early failure of endoscopic stenting. Ten patients (4 men, 6 women; age range, 52-78 years; mean age, 69 years) with inoperable biliary obstruction (2 patients with gall bladder cancer and hilar invasion, and 8 patients with Klatskin tumor) and with early endoscopic stent failure were included in our study. All of the patients underwent PTBD and percutaneous transhepatic biliary stenting. Metallic stents were placed in all patients for internal drainage. Percutaneous rescue stenting was successful in all the patients technically and clinically. Mean time for the development of biliary obstruction was 13.5 days after endoscopic stenting. The mean patency of the rescue stenting was 122 days. The mean survival time for percutaneous transhepatic rescue stenting was 226.3 days. In early failure of endoscopic biliary stenting, percutaneous transhepatic recanalization can be a possible solution.

Percutaneous transhepatic recanalization of malignant hilarobstruction: A possible rescue for early failure of endoscopic y-stenting

International Nuclear Information System (INIS)

Kwon, Hoon; Kim, Chang Won; Lee, Tae Hong; Kim, Dong Uk; Jeon, Ung Bae; Kang, Dae Hwan

2013-01-01

Endoscopic biliary stenting is well known as an optimal method of management of malignant hilar obstruction, but sometimes the result is not satisfactory, with early stent failure. Percutaneous transhepatic biliary drainage (PTBD) has a distinct advantage over endoscopic retrograde cholangiopancreatoscopy in that with ultrasound guidance one or more appropriate segments for drainage can be chosen. We evaluated the effectiveness of percutaneous transhepatic stenting as a rescue of early failure of endoscopic stenting. Ten patients (4 men, 6 women; age range, 52-78 years; mean age, 69 years) with inoperable biliary obstruction (2 patients with gall bladder cancer and hilar invasion, and 8 patients with Klatskin tumor) and with early endoscopic stent failure were included in our study. All of the patients underwent PTBD and percutaneous transhepatic biliary stenting. Metallic stents were placed in all patients for internal drainage. Percutaneous rescue stenting was successful in all the patients technically and clinically. Mean time for the development of biliary obstruction was 13.5 days after endoscopic stenting. The mean patency of the rescue stenting was 122 days. The mean survival time for percutaneous transhepatic rescue stenting was 226.3 days. In early failure of endoscopic biliary stenting, percutaneous transhepatic recanalization can be a possible solution.

An observational study on the association of nonalcoholic fatty liver disease and metabolic syndrome with gall stone disease requiring cholecystectomy

Directory of Open Access Journals (Sweden)

Farah Ahmed

2017-05-01

Conclusion: We found association of metabolic syndrome with gallstones and NAFLD. Non alcoholic fatty liver was highly prevalent in our study subjects. Huge percentage of first degree relatives of gall stone patients had gallstones and this relation was more pronounced patients who had associated NAFLD.

Impacts of Mechanical Macrophyte Removal Devices on Sediment Scouring in Littoral Habitats: II. Experimental Operation in the Littoral Zone of Eau Galle Reservoir, Wisconsin

National Research Council Canada - National Science Library

James, William F; Wright, David I; Barko, John W; Eakin, Harry L

2006-01-01

... in Eau Galle Reservoir, Wisconsin. Mechanical macrophyte removal devices are an attractive, low-cost means of removing macrophytes in specific areas without herbicides or repeated mechanical harvesting...

Progressive Damage and Failure Analysis of Composite Laminates

Science.gov (United States)

Joseph, Ashith P. K.

Composite materials are widely used in various industries for making structural parts due to higher strength to weight ratio, better fatigue life, corrosion resistance and material property tailorability. To fully exploit the capability of composites, it is required to know the load carrying capacity of the parts made of them. Unlike metals, composites are orthotropic in nature and fails in a complex manner under various loading conditions which makes it a hard problem to analyze. Lack of reliable and efficient failure analysis tools for composites have led industries to rely more on coupon and component level testing to estimate the design space. Due to the complex failure mechanisms, composite materials require a very large number of coupon level tests to fully characterize the behavior. This makes the entire testing process very time consuming and costly. The alternative is to use virtual testing tools which can predict the complex failure mechanisms accurately. This reduces the cost only to it's associated computational expenses making significant savings. Some of the most desired features in a virtual testing tool are - (1) Accurate representation of failure mechanism: Failure progression predicted by the virtual tool must be same as those observed in experiments. A tool has to be assessed based on the mechanisms it can capture. (2) Computational efficiency: The greatest advantages of a virtual tools are the savings in time and money and hence computational efficiency is one of the most needed features. (3) Applicability to a wide range of problems: Structural parts are subjected to a variety of loading conditions including static, dynamic and fatigue conditions. A good virtual testing tool should be able to make good predictions for all these different loading conditions. The aim of this PhD thesis is to develop a computational tool which can model the progressive failure of composite laminates under different quasi-static loading conditions. The analysis

Dependency Analysis Guidance Nordic/German Working Group on Common Cause Failure analysis. Phase 2, Development of Harmonized Approach and Applications for Common Cause Failure Quantification

Energy Technology Data Exchange (ETDEWEB)

Becker, Guenter; Johanson, Gunnar; Lindberg, Sandra; Vaurio, Jussi

2009-03-15

The Regulatory Code SSMFS 2008:1 of Swedish Radiation Safety Authority (SSM) includes requirements regarding the performance of probabilistic safety assessments (PSA), as well as PSA activities in general. Therefore, the follow-up of these activities is part of the inspection tasks of SSM. According to the SSMFS 2008:1, the safety analyses shall be based on a systematic identification and evaluation of such events, event sequences and other conditions which may lead to a radiological accident. The research report Nordic/German Working Group on Common cause Failure analysis. Phase 2 project report: Development of Harmonized Approach and Applications for Common Cause Failure Quantification has been developed under a contract with the Nordic PSA Group (NPSAG) and its German counterpart VGB, with the aim to create a common experience base for defence and analysis of dependent failures i.e. Common Cause Failures CCF. Phase 2 in this project if a deepened data analyses of CCF events and a demonstration on how the so called impact vectors can be constructed and on how CCF parameters are estimated. The word Guidance in the report title is used in order to indicate a common methodological guidance accepted by the NPSAG, based on current state of the art concerning the analysis of dependent failures and adapted to conditions relevant for Nordic sites. This will make it possible for the utilities to perform cost effective improvements and analyses. The report presents a common attempt by the authorities and the utilities to create a methodology and experience base for defence and analysis of dependent failures. The performed benchmark application has shown how important the interpretation of base data is to obtain robust CCF data and data analyses results. Good features were found in all benchmark approaches. The obtained experiences and approaches should now be used in harmonised procedures. A next step could be to develop and agree on event and formula driven impact vector

Dependency Analysis Guidance Nordic/German Working Group on Common Cause Failure analysis. Phase 2, Development of Harmonized Approach and Applications for Common Cause Failure Quantification

International Nuclear Information System (INIS)

Becker, Guenter; Johanson, Gunnar; Lindberg, Sandra; Vaurio, Jussi

2009-03-01

The Regulatory Code SSMFS 2008:1 of Swedish Radiation Safety Authority (SSM) includes requirements regarding the performance of probabilistic safety assessments (PSA), as well as PSA activities in general. Therefore, the follow-up of these activities is part of the inspection tasks of SSM. According to the SSMFS 2008:1, the safety analyses shall be based on a systematic identification and evaluation of such events, event sequences and other conditions which may lead to a radiological accident. The research report Nordic/German Working Group on Common cause Failure analysis. Phase 2 project report: Development of Harmonized Approach and Applications for Common Cause Failure Quantification has been developed under a contract with the Nordic PSA Group (NPSAG) and its German counterpart VGB, with the aim to create a common experience base for defence and analysis of dependent failures i.e. Common Cause Failures CCF. Phase 2 in this project if a deepened data analyses of CCF events and a demonstration on how the so called impact vectors can be constructed and on how CCF parameters are estimated. The word Guidance in the report title is used in order to indicate a common methodological guidance accepted by the NPSAG, based on current state of the art concerning the analysis of dependent failures and adapted to conditions relevant for Nordic sites. This will make it possible for the utilities to perform cost effective improvements and analyses. The report presents a common attempt by the authorities and the utilities to create a methodology and experience base for defence and analysis of dependent failures. The performed benchmark application has shown how important the interpretation of base data is to obtain robust CCF data and data analyses results. Good features were found in all benchmark approaches. The obtained experiences and approaches should now be used in harmonised procedures. A next step could be to develop and agree on event and formula driven impact vector

Failure analysis of the cement mantle in total hip arthroplasty with an efficient probabilistic method.

Science.gov (United States)

Kaymaz, Irfan; Bayrak, Ozgu; Karsan, Orhan; Celik, Ayhan; Alsaran, Akgun

2014-04-01

Accurate prediction of long-term behaviour of cemented hip implants is very important not only for patient comfort but also for elimination of any revision operation due to failure of implants. Therefore, a more realistic computer model was generated and then used for both deterministic and probabilistic analyses of the hip implant in this study. The deterministic failure analysis was carried out for the most common failure states of the cement mantle. On the other hand, most of the design parameters of the cemented hip are inherently uncertain quantities. Therefore, the probabilistic failure analysis was also carried out considering the fatigue failure of the cement mantle since it is the most critical failure state. However, the probabilistic analysis generally requires large amount of time; thus, a response surface method proposed in this study was used to reduce the computation time for the analysis of the cemented hip implant. The results demonstrate that using an efficient probabilistic approach can significantly reduce the computation time for the failure probability of the cement from several hours to minutes. The results also show that even the deterministic failure analyses do not indicate any failure of the cement mantle with high safety factors, the probabilistic analysis predicts the failure probability of the cement mantle as 8%, which must be considered during the evaluation of the success of the cemented hip implants.

Tests and analysis on steam generator tube failure propagation

International Nuclear Information System (INIS)

Tanabe, Hiromi

1990-01-01

The understanding of leak enlargement and failure propagation behavior is essential to select a design basis leak (DBL) of LMFBR steam generators. Therefore, various series of experiments, such as self-enlargement tests, target wastage tests, failure propagation tests were conducted in a wide range of leak using test facilities of SWAT at PNC/OEC. Especially, in the large leak tests, potential of overheating failure was investigated under a prototypical steam cooling condition inside target tubes. In the small leak, the difference of wastage resistivity was clarified among several tube materials such as 9-chrome steels. In regard to an analytical approach, a computer code LEAP (Leak Enlargement and Propagation) was developed on the basis of all of these experimental results. The code was used to validate the previously selected DBL of the prototype reactor, Monju, steam generator. This approach proved to be successful in spite of somewhat over-conservatism in the analysis. Moreover, LEAP clarified the effectiveness of a rapid steam dump and an enhanced leak detection system. The code improvement toward a realistic analysis is desired, however, to lessen the DBL for a future large plant and then the re-evaluation of the experimental data such as the size of secondary failure is under way. (author). 4 refs, 8 figs, 1 tab

Failure analysis of high strength pipeline with single and multiple corrosions

International Nuclear Information System (INIS)

Chen, Yanfei; Zhang, Hong; Zhang, Juan; Li, Xin; Zhou, Jing

2015-01-01

Highlights: • We study failure of high strength pipelines with single corrosion. • We give regression equations for failure pressure prediction. • We propose assessment procedure for pipelines with multiple corrosions. - Abstract: Corrosion will compromise safety operation of oil and gas pipelines, accurate determination of failure pressure finds importance in residual strength assessment and corrosion allowance design of onshore and offshore pipelines. This paper investigates failure pressure of high strength pipeline with single and multiple corrosions using nonlinear finite element analysis. On the basis of developed regression equations for failure pressure prediction of high strength pipeline with single corrosion, the paper proposes an assessment procedure for predicting failure pressure of high strength pipeline with multiple corrosions. Furthermore, failure pressures predicted by proposed solutions are compared with experimental results and various assessment methods available in literature, where accuracy and versatility are demonstrated

Failure analysis on a chemical waste pipe

International Nuclear Information System (INIS)

Ambler, J.R.

1985-01-01

A failure analysis of a chemical waste pipe illustrates how nuclear technology can spin off metallurgical consultant services. The pipe, made of zirconium alloy (Zr-2.5 wt percent Nb, UNS 60705), had cracked in several places, all at butt welds. A combination of fractography and metallography indicated delayed hydride cracking

PACC information management code for common cause failures analysis

International Nuclear Information System (INIS)

Ortega Prieto, P.; Garcia Gay, J.; Mira McWilliams, J.

1987-01-01

The purpose of this paper is to present the PACC code, which, through an adequate data management, makes the task of computerized common-mode failure analysis easier. PACC processes and generates information in order to carry out the corresponding qualitative analysis, by means of the boolean technique of transformation of variables, and the quantitative analysis either using one of several parametric methods or a direct data-base. As far as the qualitative analysis is concerned, the code creates several functional forms for the transformation equations according to the user's choice. These equations are subsequently processed by boolean manipulation codes, such as SETS. The quantitative calculations of the code can be carried out in two different ways: either starting from a common cause data-base, or through parametric methods, such as the Binomial Failure Rate Method, the Basic Parameters Method or the Multiple Greek Letter Method, among others. (orig.)

The analysis of failure data in the presence of critical and degraded failures

International Nuclear Information System (INIS)

Haugen, Knut; Hokstad, Per; Sandtorv, Helge

1997-01-01

Reported failures are often classified into severityclasses, e.g., as critical or degraded. The critical failures correspond to loss of function(s) and are those of main concern. The rate of critical failures is usually estimated by the number of observed critical failures divided by the exposure time, thus ignoring the observed degraded failures. In the present paper failure data are analyzed, applying an alternative estimate for the critical failure rate, also taking the number of observed degraded failures into account. The model includes two alternative failure mechanisms, one being of the shock type, immediately leading to a critical failure, another resulting in a gradual deterioration, leading to a degraded failure before the critical failure occurs. Failure data on safety valves from the OREDA (Offshore REliability DAta) data base are analyzed using this model. The estimate for the critical failure rate is obtained and compared with the standard estimate

Failure mode and effects analysis and fault tree analysis of surface image guided cranial radiosurgery.

Science.gov (United States)

Manger, Ryan P; Paxton, Adam B; Pawlicki, Todd; Kim, Gwe-Ya

2015-05-01

Surface image guided, Linac-based radiosurgery (SIG-RS) is a modern approach for delivering radiosurgery that utilizes optical stereoscopic imaging to monitor the surface of the patient during treatment in lieu of using a head frame for patient immobilization. Considering the novelty of the SIG-RS approach and the severity of errors associated with delivery of large doses per fraction, a risk assessment should be conducted to identify potential hazards, determine their causes, and formulate mitigation strategies. The purpose of this work is to investigate SIG-RS using the combined application of failure modes and effects analysis (FMEA) and fault tree analysis (FTA), report on the effort required to complete the analysis, and evaluate the use of FTA in conjunction with FMEA. A multidisciplinary team was assembled to conduct the FMEA on the SIG-RS process. A process map detailing the steps of the SIG-RS was created to guide the FMEA. Failure modes were determined for each step in the SIG-RS process, and risk priority numbers (RPNs) were estimated for each failure mode to facilitate risk stratification. The failure modes were ranked by RPN, and FTA was used to determine the root factors contributing to the riskiest failure modes. Using the FTA, mitigation strategies were formulated to address the root factors and reduce the risk of the process. The RPNs were re-estimated based on the mitigation strategies to determine the margin of risk reduction. The FMEA and FTAs for the top two failure modes required an effort of 36 person-hours (30 person-hours for the FMEA and 6 person-hours for two FTAs). The SIG-RS process consisted of 13 major subprocesses and 91 steps, which amounted to 167 failure modes. Of the 91 steps, 16 were directly related to surface imaging. Twenty-five failure modes resulted in a RPN of 100 or greater. Only one of these top 25 failure modes was specific to surface imaging. The riskiest surface imaging failure mode had an overall RPN-rank of eighth

Importance of competing risks in the analysis of anti-epileptic drug failure

Directory of Open Access Journals (Sweden)

Sander Josemir W

2007-03-01

Full Text Available Abstract Background Retention time (time to treatment failure is a commonly used outcome in antiepileptic drug (AED studies. Methods Two datasets are used to demonstrate the issues in a competing risks analysis of AEDs. First, data collection and follow-up considerations are discussed with reference to information from 15 monotherapy trials. Recommendations for improved data collection and cumulative incidence analysis are then illustrated using the SANAD trial dataset. The results are compared to the more common approach using standard survival analysis methods. Results A non-significant difference in overall treatment failure time between gabapentin and topiramate (logrank test statistic = 0.01, 1 degree of freedom, p-value = 0.91 masked highly significant differences in opposite directions with gabapentin resulting in fewer withdrawals due to side effects (Gray's test statistic = 11.60, 1 degree of freedom, p = 0.0007 but more due to poor seizure control (Gray's test statistic = 14.47, 1 degree of freedom, p-value = 0.0001. The significant difference in overall treatment failure time between lamotrigine and carbamazepine (logrank test statistic = 5.6, 1 degree of freedom, p-value = 0.018 was due entirely to a significant benefit of lamotrigine in terms of side effects (Gray's test statistic = 10.27, 1 degree of freedom, p = 0.001. Conclusion Treatment failure time can be measured reliably but care is needed to collect sufficient information on reasons for drug withdrawal to allow a competing risks analysis. Important differences between the profiles of AEDs may be missed unless appropriate statistical methods are used to fully investigate treatment failure time. Cumulative incidence analysis allows comparison of the probability of failure between two AEDs and is likely to be a more powerful approach than logrank analysis for most comparisons of standard and new anti-epileptic drugs.

Clinical risk analysis with failure mode and effect analysis (FMEA) model in a dialysis unit.

Science.gov (United States)

Bonfant, Giovanna; Belfanti, Pietro; Paternoster, Giuseppe; Gabrielli, Danila; Gaiter, Alberto M; Manes, Massimo; Molino, Andrea; Pellu, Valentina; Ponzetti, Clemente; Farina, Massimo; Nebiolo, Pier E

2010-01-01

The aim of clinical risk management is to improve the quality of care provided by health care organizations and to assure patients' safety. Failure mode and effect analysis (FMEA) is a tool employed for clinical risk reduction. We applied FMEA to chronic hemodialysis outpatients. FMEA steps: (i) process study: we recorded phases and activities. (ii) Hazard analysis: we listed activity-related failure modes and their effects; described control measures; assigned severity, occurrence and detection scores for each failure mode and calculated the risk priority numbers (RPNs) by multiplying the 3 scores. Total RPN is calculated by adding single failure mode RPN. (iii) Planning: we performed a RPNs prioritization on a priority matrix taking into account the 3 scores, and we analyzed failure modes causes, made recommendations and planned new control measures. (iv) Monitoring: after failure mode elimination or reduction, we compared the resulting RPN with the previous one. Our failure modes with the highest RPN came from communication and organization problems. Two tools have been created to ameliorate information flow: "dialysis agenda" software and nursing datasheets. We scheduled nephrological examinations, and we changed both medical and nursing organization. Total RPN value decreased from 892 to 815 (8.6%) after reorganization. Employing FMEA, we worked on a few critical activities, and we reduced patients' clinical risk. A priority matrix also takes into account the weight of the control measures: we believe this evaluation is quick, because of simple priority selection, and that it decreases action times.

Application of failure mode and effect analysis in a radiology department.

Science.gov (United States)

Thornton, Eavan; Brook, Olga R; Mendiratta-Lala, Mishal; Hallett, Donna T; Kruskal, Jonathan B

2011-01-01

With increasing deployment, complexity, and sophistication of equipment and related processes within the clinical imaging environment, system failures are more likely to occur. These failures may have varying effects on the patient, ranging from no harm to devastating harm. Failure mode and effect analysis (FMEA) is a tool that permits the proactive identification of possible failures in complex processes and provides a basis for continuous improvement. This overview of the basic principles and methodology of FMEA provides an explanation of how FMEA can be applied to clinical operations in a radiology department to reduce, predict, or prevent errors. The six sequential steps in the FMEA process are explained, and clinical magnetic resonance imaging services are used as an example for which FMEA is particularly applicable. A modified version of traditional FMEA called Healthcare Failure Mode and Effect Analysis, which was introduced by the U.S. Department of Veterans Affairs National Center for Patient Safety, is briefly reviewed. In conclusion, FMEA is an effective and reliable method to proactively examine complex processes in the radiology department. FMEA can be used to highlight the high-risk subprocesses and allows these to be targeted to minimize the future occurrence of failures, thus improving patient safety and streamlining the efficiency of the radiology department. RSNA, 2010

Exact combinatorial reliability analysis of dynamic systems with sequence-dependent failures

International Nuclear Information System (INIS)

Xing Liudong; Shrestha, Akhilesh; Dai Yuanshun

2011-01-01

Many real-life fault-tolerant systems are subjected to sequence-dependent failure behavior, in which the order in which the fault events occur is important to the system reliability. Such systems can be modeled by dynamic fault trees (DFT) with priority-AND (pAND) gates. Existing approaches for the reliability analysis of systems subjected to sequence-dependent failures are typically state-space-based, simulation-based or inclusion-exclusion-based methods. Those methods either suffer from the state-space explosion problem or require long computation time especially when results with high degree of accuracy are desired. In this paper, an analytical method based on sequential binary decision diagrams is proposed. The proposed approach can analyze the exact reliability of non-repairable dynamic systems subjected to the sequence-dependent failure behavior. Also, the proposed approach is combinatorial and is applicable for analyzing systems with any arbitrary component time-to-failure distributions. The application and advantages of the proposed approach are illustrated through analysis of several examples. - Highlights: → We analyze the sequence-dependent failure behavior using combinatorial models. → The method has no limitation on the type of time-to-failure distributions. → The method is analytical and based on sequential binary decision diagrams (SBDD). → The method is computationally more efficient than existing methods.

A new genus and species of gall midge (Diptera, Cecidomyiidae associated with Parkia pendula (Fabaceae, Mimosoideae Um novo gênero e espécie de mosquito galhador (Diptera: Cecidomyiidae associado com Parkia pendula (Fabaceae, Mimosoideae

Directory of Open Access Journals (Sweden)

Valéria Cid Maia

2006-03-01

Full Text Available Parkiamyia paraensis, a new genus and species of Cecidomyiidae that induces galls on Parkia pendula is described (larva, pupa, male,female and gall based on material from Pará (Brazil.Parkiamyia paraensis, um novo gênero e espécie de Cecidomyiidae é descrita (larva, pupa, macho e fêmea com base em material do Pará (Brasil.

Efficient surrogate models for reliability analysis of systems with multiple failure modes

International Nuclear Information System (INIS)

Bichon, Barron J.; McFarland, John M.; Mahadevan, Sankaran

2011-01-01

Despite many advances in the field of computational reliability analysis, the efficient estimation of the reliability of a system with multiple failure modes remains a persistent challenge. Various sampling and analytical methods are available, but they typically require accepting a tradeoff between accuracy and computational efficiency. In this work, a surrogate-based approach is presented that simultaneously addresses the issues of accuracy, efficiency, and unimportant failure modes. The method is based on the creation of Gaussian process surrogate models that are required to be locally accurate only in the regions of the component limit states that contribute to system failure. This approach to constructing surrogate models is demonstrated to be both an efficient and accurate method for system-level reliability analysis. - Highlights: → Extends efficient global reliability analysis to systems with multiple failure modes. → Constructs locally accurate Gaussian process models of each response. → Highly efficient and accurate method for assessing system reliability. → Effectiveness is demonstrated on several test problems from the literature.

Development of component failure data for seismic risk analysis

International Nuclear Information System (INIS)

Fray, R.R.; Moulia, T.A.

1981-01-01

This paper describes the quantification and utilization of seismic failure data used in the Diablo Canyon Seismic Risk Study. A single variable representation of earthquake severity that uses peak horizontal ground acceleration to characterize earthquake severity was employed. The use of a multiple variable representation would allow direct consideration of vertical accelerations and the spectral nature of earthquakes but would have added such complexity that the study would not have been feasible. Vertical accelerations and spectral nature were indirectly considered because component failure data were derived from design analyses, qualification tests and engineering judgment that did include such considerations. Two types of functions were used to describe component failure probabilities. Ramp functions were used for components, such as piping and structures, qualified by stress analysis. 'Anchor points' for ramp functions were selected by assuming a zero probability of failure at code allowable stress levels and unity probability of failure at ultimate stress levels. The accelerations corresponding to allowable and ultimate stress levels were determined by conservatively assuming a linear relationship between seismic stress and ground acceleration. Step functions were used for components, such as mechanical and electrical equipment, qualified by testing. Anchor points for step functions were selected by assuming a unity probability of failure above the qualification acceleration. (orig./HP)

Timing analysis of PWR fuel pin failures

International Nuclear Information System (INIS)

Jones, K.R.; Wade, N.L.; Katsma, K.R.; Siefken, L.J.; Straka, M.

1992-09-01

Research has been conducted to develop and demonstrate a methodology for calculation of the time interval between receipt of the containment isolation signals and the first fuel pin failure for loss-of-coolant accidents (LOCAs). Demonstration calculations were performed for a Babcock and Wilcox (B ampersand W) design (Oconee) and a Westinghouse (W) four-loop design (Seabrook). Sensitivity studies were performed to assess the impacts of fuel pin bumup, axial peaking factor, break size, emergency core cooling system availability, and main coolant pump trip on these times. The analysis was performed using the following codes: FRAPCON-2, for the calculation of steady-state fuel behavior; SCDAP/RELAP5/MOD3 and TRACPF1/MOD1, for the calculation of the transient thermal-hydraulic conditions in the reactor system; and FRAP-T6, for the calculation of transient fuel behavior. In addition to the calculation of fuel pin failure timing, this analysis provides a comparison of the predicted results of SCDAP/RELAP5/MOD3 and TRAC-PFL/MOD1 for large-break LOCA analysis. Using SCDAP/RELAP5/MOD3 thermal-hydraulic data, the shortest time intervals calculated between initiation of containment isolation and fuel pin failure are 10.4 seconds and 19.1 seconds for the B ampersand W and W plants, respectively. Using data generated by TRAC-PF1/MOD1, the shortest intervals are 10.3 seconds and 29.1 seconds for the B ampersand W and W plants, respectively. These intervals are for a double-ended, offset-shear, cold leg break, using the technical specification maximum peaking factor and applied to fuel with maximum design bumup. Using peaking factors commensurate widi actual bumups would result in longer intervals for both reactor designs. This document also contains appendices A through J of this report

Failure Mode and Effect Analysis for Wind Turbine Systems in China

DEFF Research Database (Denmark)

Zhu, Jiangsheng; Ma, Kuichao; N. Soltani, Mohsen

2017-01-01

This paper discusses a cost based Failure Mode and Effect Analysis (FMEA) approch for the Wind Turbine (WT) with condition monitoring system in China. Normally, the traditional FMEA uses the Risk Priority Number (RPN) to rank failure modes. But the RPN can be changed with the Condition Monitoring...... Systems (CMS) due to change of the score of detection. The cost of failure mode should also be considered because faults can be detected at an incipient level, and condition-based maintenance can be scheduled. The results show that the proposed failure mode priorities considering their cost consequences...

Galling Resistance of An Anti-friction Coating on Oil-casing Couplings

Directory of Open Access Journals (Sweden)

Zhao Shilong

2016-01-01

Full Text Available Generally, oil tubing and casing connections made of carbon steel are connected using phosphate-treated coupling, but high-grade steel oil casing can only be connected using copperized couplings, which are expensive and result in environmental pollution. A new anti-friction coating was prepared by adding suitable amounts of nanoparticles into a highly pure and concentrated nano-copper suspension, with epoxy resin as a binder. Laboratory tests and full-scale make and break tests show that a heterogeneous copper layer is formed after curing when this coating was applied to the phosphate layer surface of couplings made of P110 and P110S casings. This can greatly reduce the make-up torque of casing thread, and can effectively improve or even eliminate galling of high-grade steel oil casing.

Optimal tread design for agricultural lug tires determined through failure analysis

Directory of Open Access Journals (Sweden)

Hyun Seok Song

2018-04-01

Full Text Available Agricultural lug tires, commonly used in tractors, must provide safe and stable support for the body of the vehicle and bear any additional load while effectively traversing rough, poor-quality ground surfaces. Many agricultural lug tires fail unexpectedly. In this study, we optimised and validated a tread design for agricultural lug tires intended to increase their durability using failure analysis. Specifically, we identified tire failure modes using indoor driving tests and failure mode effects analysis. Next, we developed a threedimensional tire model using the Ogden material model and finite element method. Using sensitivity analysis and response surface methodology, we optimised the tread design. Finally, we evaluated the durability of the new design using a tire prototype and drum test equipment. Results indicated that the optimised tread design decreased the tire tread stress by 16% and increased its time until cracking by 38% compared to conventional agricultural lug tires.

Software failure events derivation and analysis by frame-based technique

International Nuclear Information System (INIS)

Huang, H.-W.; Shih, C.; Yih, Swu; Chen, M.-H.

2007-01-01

A frame-based technique, including physical frame, logical frame, and cognitive frame, was adopted to perform digital I and C failure events derivation and analysis for generic ABWR. The physical frame was structured with a modified PCTran-ABWR plant simulation code, which was extended and enhanced on the feedwater system, recirculation system, and steam line system. The logical model is structured with MATLAB, which was incorporated into PCTran-ABWR to improve the pressure control system, feedwater control system, recirculation control system, and automated power regulation control system. As a result, the software failure of these digital control systems can be properly simulated and analyzed. The cognitive frame was simulated by the operator awareness status in the scenarios. Moreover, via an internal characteristics tuning technique, the modified PCTran-ABWR can precisely reflect the characteristics of the power-core flow. Hence, in addition to the transient plots, the analysis results can then be demonstrated on the power-core flow map. A number of postulated I and C system software failure events were derived to achieve the dynamic analyses. The basis for event derivation includes the published classification for software anomalies, the digital I and C design data for ABWR, chapter 15 accident analysis of generic SAR, and the reported NPP I and C software failure events. The case study of this research includes: (1) the software CMF analysis for the major digital control systems; and (2) postulated ABWR digital I and C software failure events derivation from the actual happening of non-ABWR digital I and C software failure events, which were reported to LER of USNRC or IRS of IAEA. These events were analyzed by PCTran-ABWR. Conflicts among plant status, computer status, and human cognitive status are successfully identified. The operator might not easily recognize the abnormal condition, because the computer status seems to progress normally. However, a well

Failure mode, effect and criticality analysis (FMECA) on mechanical subsystems of diesel generator at NPP

International Nuclear Information System (INIS)

Kim, Tae Woon; Singh, Brijendra; Sung, Tae Yong; Park, Jin Hee; Lee, Yoon Hwan

1996-06-01

Largely, the RCM approach can be divided in three phases; (1) Functional failure analysis (FFA) on the selected system or subsystem, (2) Failure mode, effect and criticality analysis (FMECA) to identify the impact of failure to plant safety or economics, (3) Logical tree analysis (LTA) to select appropriate preventive maintenance and surveillance tasks. This report presents FMECA results for six mechanical subsystems of the diesel generators of nuclear power plants. The six mechanical subsystems are Starting air, Lub oil, Governor, Jacket water cooling, Fuel, and Engine subsystems. Generic and plant-specific failure and maintenance records are reviewed to identify critical components/failure modes. FMECA was performed for these critical component/failure modes. After reviewing current preventive maintenance activities of Wolsung unit 1, draft RCM recommendations are developed. 6 tabs., 16 refs. (Author)

Failure mode, effect and criticality analysis (FMECA) on mechanical subsystems of diesel generator at NPP

Energy Technology Data Exchange (ETDEWEB)

Kim, Tae Woon; Singh, Brijendra; Sung, Tae Yong; Park, Jin Hee; Lee, Yoon Hwan [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1996-06-01

Largely, the RCM approach can be divided in three phases; (1) Functional failure analysis (FFA) on the selected system or subsystem, (2) Failure mode, effect and criticality analysis (FMECA) to identify the impact of failure to plant safety or economics, (3) Logical tree analysis (LTA) to select appropriate preventive maintenance and surveillance tasks. This report presents FMECA results for six mechanical subsystems of the diesel generators of nuclear power plants. The six mechanical subsystems are Starting air, Lub oil, Governor, Jacket water cooling, Fuel, and Engine subsystems. Generic and plant-specific failure and maintenance records are reviewed to identify critical components/failure modes. FMECA was performed for these critical component/failure modes. After reviewing current preventive maintenance activities of Wolsung unit 1, draft RCM recommendations are developed. 6 tabs., 16 refs. (Author).

The Statistical Analysis of Failure Time Data

CERN Document Server

Kalbfleisch, John D

2011-01-01

Contains additional discussion and examples on left truncation as well as material on more general censoring and truncation patterns.Introduces the martingale and counting process formulation swil lbe in a new chapter.Develops multivariate failure time data in a separate chapter and extends the material on Markov and semi Markov formulations.Presents new examples and applications of data analysis.

Failure Modes and Effects Analysis (FMEA) Assistant Tool Feasibility Study

Science.gov (United States)

Flores, Melissa D.; Malin, Jane T.; Fleming, Land D.

2013-09-01

An effort to determine the feasibility of a software tool to assist in Failure Modes and Effects Analysis (FMEA) has been completed. This new and unique approach to FMEA uses model based systems engineering concepts to recommend failure modes, causes, and effects to the user after they have made several selections from pick lists about a component's functions and inputs/outputs. Recommendations are made based on a library using common failure modes identified over the course of several major human spaceflight programs. However, the tool could be adapted for use in a wide range of applications from NASA to the energy industry.

Failure Modes and Effects Analysis (FMEA) Assistant Tool Feasibility Study

Science.gov (United States)

Flores, Melissa; Malin, Jane T.

2013-01-01

An effort to determine the feasibility of a software tool to assist in Failure Modes and Effects Analysis (FMEA) has been completed. This new and unique approach to FMEA uses model based systems engineering concepts to recommend failure modes, causes, and effects to the user after they have made several selections from pick lists about a component s functions and inputs/outputs. Recommendations are made based on a library using common failure modes identified over the course of several major human spaceflight programs. However, the tool could be adapted for use in a wide range of applications from NASA to the energy industry.

Causes of liver failure and impact analysis of prognostic risk factors

Directory of Open Access Journals (Sweden)

WU Xiaoqing

2013-04-01

Full Text Available ObjectiveTo perform a retrospective analysis of patients with liver failure to investigate the causative factors and related risk factors that may affect patient prognosis. MethodsThe clinical, demographic, and laboratory data of 79 consecutive patients diagnosed with liver failure and treated at our hospital between January 2010 and January 2012 (58 males and 21 females; age range: 16-74 years old were collected from the medical records. To identify risk factors of liver failure, the patient variables were assessed by Student’s t-test (continuous variables or Chi-squared test (categorical variables. Multivariate logistic regression analysis was used to investigate the relation between patient outcome and independent risk factors. ResultsThe 79 cases of liver failure were grouped according to disease severity: acute liver failure (n=6; 5 died, subacute liver failure (n=35; 19 died, and chronic liver failure (n=38; 28 died. The overall rate of death was 66%. The majority of cases (81% were related to hepatitis B virus infection. While the three groups of liver failure severity did not show significant differences in sex, mean age, occupation, presence of potassium disorder, total bilirubin (TBil or total cholesterol (CHO at admission, or lowest recorded level of CHO during hospitalization, there were significant intergroup differences in highest recorded TBil level, prothrombin activity (PTA at admission, and highest and lowest recorded PTA, and highest recorded level of CHO. Five independent risk factors were identified: the highest recorded TBil level during hospitalization, presence of infection, hepatorenal syndrome, gastrointestinal bleeding, and hepatic encephalopathy. ConclusionThe major cause of liver failure in this cohort of patients was hepatitis infection, and common biomarkers of liver function, such as TBil, CHO and PTA, may indicate patients with poor prognosis despite clinical intervention. Complications should be addressed as

RAPD markers for screening shoot gall maker (Betousa stylophora Swinhoe tolerant genotypes of amla (Phyllanthus emblica L.

Directory of Open Access Journals (Sweden)

Sethuraman Thilaga

2017-12-01

Full Text Available Phyllanthus emblica Linn. is the most important medicinally useful tree crop in Asian Subcontinent and is severely infested by Betousa stylophora Swinhoe, known as shoot gall maker (SGM. This pest tunnels the shoots of seedlings and actively growing branches of trees and develops gall, leading to stunted growth, unusual branching and death of actively growing shoots. Our study revealed that trees possessing smooth bark were free from the attack of this pest than those with rough bark surface. Unfortunately, this character is not detectable either at seedling stage or during early growth of trees in the orchard. RAPD genetic fingerprinting of trees possessing smooth and rough bark revealed distinguishable and highly reproducible DNA banding pattern between the two genotypes. Of the 20 RAPD primers tested, five of them produced distinguishable RAPD bands between rough and smooth barked genotypes of P. emblica. Trees with smooth bark produced five unique RAPD bands with molecular weight ranging from 350 bp to 1500 bp and those with rough bark produced six RAPD bands (350 bp–650 bp to utilize these DNA bands as potential DNA marker for screening tolerant genotypes of this crop against SGM. The utility of this finding in genetic improvement of this tree crop against SGM is discussed.

Failure analysis a practical guide for manufacturers of electronic components and systems

CERN Document Server

Bâzu, Marius

2011-01-01

Failure analysis is the preferred method to investigate product or process reliability and to ensure optimum performance of electrical components and systems. The physics-of-failure approach is the only internationally accepted solution for continuously improving the reliability of materials, devices and processes. The models have been developed from the physical and chemical phenomena that are responsible for degradation or failure of electronic components and materials and now replace popular distribution models for failure mechanisms such as Weibull or lognormal. Reliability engineers nee

Analysis of the failure of a vacuum spin-pit drive turbine spindle shaft

OpenAIRE

Pettitt, Jason M.

2005-01-01

The Naval Postgraduate School's Rotor Spin Research Facility experienced a failure in the Spring of 2005 in which the rotor dropped from the drive turbine and caused extensive damage. A failure analysis of the drive turbine spindle shaft was conducted in order to determine the cause of failure: whether due to a material or design flaw. Also, a dynamic analysis was conducted in order to determine the natural modes present in the system and the associated frequencies that could have contributed...

Statistical analysis of events related to emergency diesel generators failures in the nuclear industry

Energy Technology Data Exchange (ETDEWEB)

Kančev, Duško, E-mail: dusko.kancev@ec.europa.eu [European Commission, DG-JRC, Institute for Energy and Transport, P.O. Box 2, NL-1755 ZG Petten (Netherlands); Duchac, Alexander; Zerger, Benoit [European Commission, DG-JRC, Institute for Energy and Transport, P.O. Box 2, NL-1755 ZG Petten (Netherlands); Maqua, Michael [Gesellschaft für Anlagen-und-Reaktorsicherheit (GRS) mbH, Schwetnergasse 1, 50667 Köln (Germany); Wattrelos, Didier [Institut de Radioprotection et de Sûreté Nucléaire (IRSN), BP 17 - 92262 Fontenay-aux-Roses Cedex (France)

2014-07-01

Highlights: • Analysis of operating experience related to emergency diesel generators events at NPPs. • Four abundant operating experience databases screened. • Delineating important insights and conclusions based on the operating experience. - Abstract: This paper is aimed at studying the operating experience related to emergency diesel generators (EDGs) events at nuclear power plants collected from the past 20 years. Events related to EDGs failures and/or unavailability as well as all the supporting equipment are in the focus of the analysis. The selected operating experience was analyzed in detail in order to identify the type of failures, attributes that contributed to the failure, failure modes potential or real, discuss risk relevance, summarize important lessons learned, and provide recommendations. The study in this particular paper is tightly related to the performing of statistical analysis of the operating experience. For the purpose of this study EDG failure is defined as EDG failure to function on demand (i.e. fail to start, fail to run) or during testing, or an unavailability of an EDG, except of unavailability due to regular maintenance. The Gesellschaft für Anlagen und Reaktorsicherheit mbH (GRS) and Institut de Radioprotection et de Sûreté Nucléaire (IRSN) databases as well as the operating experience contained in the IAEA/NEA International Reporting System for Operating Experience and the U.S. Licensee Event Reports were screened. The screening methodology applied for each of the four different databases is presented. Further on, analysis aimed at delineating the causes, root causes, contributing factors and consequences are performed. A statistical analysis was performed related to the chronology of events, types of failures, the operational circumstances of detection of the failure and the affected components/subsystems. The conclusions and results of the statistical analysis are discussed. The main findings concerning the testing

Statistical analysis of events related to emergency diesel generators failures in the nuclear industry

International Nuclear Information System (INIS)

Kančev, Duško; Duchac, Alexander; Zerger, Benoit; Maqua, Michael; Wattrelos, Didier

2014-01-01

Highlights: • Analysis of operating experience related to emergency diesel generators events at NPPs. • Four abundant operating experience databases screened. • Delineating important insights and conclusions based on the operating experience. - Abstract: This paper is aimed at studying the operating experience related to emergency diesel generators (EDGs) events at nuclear power plants collected from the past 20 years. Events related to EDGs failures and/or unavailability as well as all the supporting equipment are in the focus of the analysis. The selected operating experience was analyzed in detail in order to identify the type of failures, attributes that contributed to the failure, failure modes potential or real, discuss risk relevance, summarize important lessons learned, and provide recommendations. The study in this particular paper is tightly related to the performing of statistical analysis of the operating experience. For the purpose of this study EDG failure is defined as EDG failure to function on demand (i.e. fail to start, fail to run) or during testing, or an unavailability of an EDG, except of unavailability due to regular maintenance. The Gesellschaft für Anlagen und Reaktorsicherheit mbH (GRS) and Institut de Radioprotection et de Sûreté Nucléaire (IRSN) databases as well as the operating experience contained in the IAEA/NEA International Reporting System for Operating Experience and the U.S. Licensee Event Reports were screened. The screening methodology applied for each of the four different databases is presented. Further on, analysis aimed at delineating the causes, root causes, contributing factors and consequences are performed. A statistical analysis was performed related to the chronology of events, types of failures, the operational circumstances of detection of the failure and the affected components/subsystems. The conclusions and results of the statistical analysis are discussed. The main findings concerning the testing

Failure analysis of motor bearing of sea water pump in nuclear power plant

International Nuclear Information System (INIS)

Bian Chunhua; Zhang Wei

2015-01-01

The motor bearing of sea water pump in Qinshan Phase II Nuclear Power plant broke after only one year's using. This paper introduces failure analysis process of the motor bearing. Chemical composition analysis, metallic phase analysis, micrographic examination, and hardness analysis, dimension analysis of each part of the bearing, as well as the high temperature and low temperature performance analysis of lubricating grease are performed. According to the analysis above mentioned, the failure mode of the bearing is wearing, and the reason of wearing is inappropriate installation of the bearing. (authors)

A Costing Analysis for Decision Making Grid Model in Failure-Based Maintenance

Directory of Open Access Journals (Sweden)

Burhanuddin M. A.

2011-01-01

Full Text Available Background. In current economic downturn, industries have to set good control on production cost, to maintain their profit margin. Maintenance department as an imperative unit in industries should attain all maintenance data, process information instantaneously, and subsequently transform it into a useful decision. Then act on the alternative to reduce production cost. Decision Making Grid model is used to identify strategies for maintenance decision. However, the model has limitation as it consider two factors only, that is, downtime and frequency of failures. We consider third factor, cost, in this study for failure-based maintenance. The objective of this paper is to introduce the formulae to estimate maintenance cost. Methods. Fish bone analysis conducted with Ishikawa model and Decision Making Grid methods are used in this study to reveal some underlying risk factors that delay failure-based maintenance. The goal of the study is to estimate the risk factor that is, repair cost to fit in the Decision Making Grid model. Decision Making grid model consider two variables, frequency of failure and downtime in the analysis. This paper introduces third variable, repair cost for Decision Making Grid model. This approaches give better result to categorize the machines, reduce cost, and boost the earning for the manufacturing plant. Results. We collected data from one of the food processing factories in Malaysia. From our empirical result, Machine C, Machine D, Machine F, and Machine I must be in the Decision Making Grid model even though their frequency of failures and downtime are less than Machine B and Machine N, based on the costing analysis. The case study and experimental results show that the cost analysis in Decision Making Grid model gives more promising strategies in failure-based maintenance. Conclusions. The improvement of Decision Making Grid model for decision analysis with costing analysis is our contribution in this paper for

An observational study on the association of nonalcoholic fatty liver disease and metabolic syndrome with gall stone disease requiring cholecystectomy.

Science.gov (United States)

Ahmed, Farah; Baloch, Qamaruddin; Memon, Zahid Ali; Ali, Iqra

2017-05-01

Recognition of Non alcoholic fatty liver disease (NAFLD) and metabolic syndrome in patients with gallstones undergoing laparoscopic or open cholecystectomy, along with it we will also study the life style of patients with gall stones. Patients with gallstones have associated NAFLD, with concurrent metabolic syndrome and these ailments share similar factors for example obesity, hypertriglyceridemia and diabetes mellitus. Factors like body mass index, gender, raised lipid levels, use of contraceptives and alcohol and having diabetes, physical inactiveness, multiparous women, water with excessive iron content, metabolic syndrome, and NAFLD are accountable factors for gallstones formation. This was a case series done at Surgical Unit 1 of Civil Hospital Karachi. Selective samples of 88 patients were included. Duration was 3 months. We included both sexes with ultrasound proof of gall stone irrespective of cholecystitis. Excluded patients with history of seropositive viral hepatitis, autoimmune and wilson's disease. As these conditions can act as a confounder to our variables. Nafld was present in 62.5%(n = 55) while 28.4% (n = 25) had metabolic syndrome. 26.94% had BMI less than 18, 32.12 had BMI between 18 and 25 and majority had BMI greater than 25 i.e in 40.93%. Of all 46.6% had a family history of cholelithiasis. Gallstone patients with NAFLD reported about their first degree relative being suffering from cholelithiasis at a significant p-value of 0.034 while this was not significant in cases of metabolic syndrome and the p -value was 0.190. We found association of metabolic syndrome with gallstones and NAFLD. Non alcoholic fatty liver was highly prevalent in our study subjects. Huge percentage of first degree relatives of gall stone patients had gallstones and this relation was more pronounced patients who had associated NAFLD.

Plant diversity and galling arthropod diversity searching for taxonomic patterns in an animal-plant interaction in the Neotropics Diversidade de plantas e diversidade de artrópodes galhadores procurando padrões taxonômicos numa interação animal-planta nos Neotrópicos

Directory of Open Access Journals (Sweden)

Milton de Souza Mendonça, Jr.

Full Text Available Gall-inducers are a special guild of endophytic herbivores generating distinct structures known as galls. Gallers are species-specific, as the galls they induce: each gall morphotype is unique. The relationship between plants and gallers is close, and some of the hypotheses to explain galling diversity consider plants directly; others do not. Here I review current diversity hypotheses on galls and their hosts, adding ideas on the interpretation of galler host plant data. The example comes from an ongoing standardised inventory of galls and hosts in Rio Grande do Sul (RS state, southern Brazil. The questions addressed here are whether: a galls occur consistently on some plant taxa in different areas, b these taxa are important for vegetation composition, and c taxon size influences galling richness. Families harbouring more gallers are usually the same throughout the Neotropics (Fabaceae, Myrtaceae, and in RS, Asteraceae, which is not unexpected as these are important components of vegetation. Larger plant families have more galls, a pattern driven by Asteraceae. At lower taxonomic levels, the dominance of a few taxa in galler richness («super-hosts» is higher. Mikania and Eugenia , for example, hold much more galls than others in the RS survey.Os galhadores são uma guilda especial de herbívoros endofíticos geradores de estruturas distintas, as galhas. Galhadores são espécie-específicos, como as galhas que induzem: cada morfotipo de galha é único. A relação entre plantas e galhadores é estreita; algumas das hipóteses para explicar a diversidade de galhadores consideram as plantas diretamente; outras não. Aqui são revistas as correntes hipóteses sobre a diversidade de galhadores e suas hospedeiras, adicionando idéias sobre a interpretação de dados dos hospedeiros. Os exemplos advêm de um inventário de galhas no Estado do Rio Grande do Sul (RS, sul do Brasil. As questões aqui são: a as galhas ocorrem consistentemente em

Functional responses and prey-stage preferences of a predatory gall midge and two predacious mites wtih twospotted spider mites, Tetranychus urticae as host

Science.gov (United States)

The twospotted spider mite, Tetranychus urticae (Acari: Tetranychidae), is an important pest of vegetables and other crops. This study was conducted to evaluate and compare the potential role of three commercially available predators, predatory gall midge, Feltiella acarisuga (Vallot) (Diptera: Ceci...

Failure analysis of parameter-induced simulation crashes in climate models

Science.gov (United States)

Lucas, D. D.; Klein, R.; Tannahill, J.; Ivanova, D.; Brandon, S.; Domyancic, D.; Zhang, Y.

2013-08-01

Simulations using IPCC (Intergovernmental Panel on Climate Change)-class climate models are subject to fail or crash for a variety of reasons. Quantitative analysis of the failures can yield useful insights to better understand and improve the models. During the course of uncertainty quantification (UQ) ensemble simulations to assess the effects of ocean model parameter uncertainties on climate simulations, we experienced a series of simulation crashes within the Parallel Ocean Program (POP2) component of the Community Climate System Model (CCSM4). About 8.5% of our CCSM4 simulations failed for numerical reasons at combinations of POP2 parameter values. We applied support vector machine (SVM) classification from machine learning to quantify and predict the probability of failure as a function of the values of 18 POP2 parameters. A committee of SVM classifiers readily predicted model failures in an independent validation ensemble, as assessed by the area under the receiver operating characteristic (ROC) curve metric (AUC > 0.96). The causes of the simulation failures were determined through a global sensitivity analysis. Combinations of 8 parameters related to ocean mixing and viscosity from three different POP2 parameterizations were the major sources of the failures. This information can be used to improve POP2 and CCSM4 by incorporating correlations across the relevant parameters. Our method can also be used to quantify, predict, and understand simulation crashes in other complex geoscientific models.

Patterns of Failure After MammoSite Brachytherapy Partial Breast Irradiation: A Detailed Analysis

International Nuclear Information System (INIS)

Chen, Sea; Dickler, Adam; Kirk, Michael; Shah, Anand; Jokich, Peter; Solmos, Gene; Strauss, Jonathan; Dowlatshahi, Kambiz; Nguyen, Cam; Griem, Katherine

2007-01-01

Purpose: To report the results of a detailed analysis of treatment failures after MammoSite breast brachytherapy for partial breast irradiation from our single-institution experience. Methods and Materials: Between October 14, 2002 and October 23, 2006, 78 patients with early-stage breast cancer were treated with breast-conserving surgery and accelerated partial breast irradiation using the MammoSite brachytherapy applicator. We identified five treatment failures in the 70 patients with >6 months' follow-up. Pathologic data, breast imaging, and radiation treatment plans were reviewed. For in-breast failures more than 2 cm away from the original surgical bed, the doses delivered to the areas of recurrence by partial breast irradiation were calculated. Results: At a median follow-up time of 26.1 months, five treatment failures were identified. There were three in-breast failures more than 2 cm away from the original surgical bed, one failure directly adjacent to the original surgical bed, and one failure in the axilla with synchronous distant metastases. The crude failure rate was 7.1% (5 of 70), and the crude local failure rate was 5.7% (4 of 70). Estimated progression-free survival at 48 months was 89.8% (standard error 4.5%). Conclusions: Our case series of 70 patients with >6 months' follow-up and a median follow-up of 26 months is the largest single-institution report to date with detailed failure analysis associated with MammoSite brachytherapy. Our failure data emphasize the importance of patient selection when offering partial breast irradiation

Laboratory and 3-D-distinct element analysis of failure mechanism of slope under external surcharge

Science.gov (United States)

Li, N.; Cheng, Y. M.

2014-09-01

Landslide is a major disaster resulting in considerable loss of human lives and property damages in hilly terrain in Hong Kong, China and many other countries. The factor of safety and the critical slip surface for slope stabilization are the main considerations for slope stability analysis in the past, while the detailed post-failure conditions of the slopes have not been considered in sufficient details. There are however increasing interest on the consequences after the initiation of failure which includes the development and propagation of the failure surfaces, the amount of failed mass and runoff and the affected region. To assess the development of slope failure in more details and to consider the potential danger of slopes after failure has initiated, the slope stability problem under external surcharge is analyzed by the distinct element method (DEM) and laboratory model test in the present research. A more refined study about the development of failure, microcosmic failure mechanism and the post-failure mechanism of slope will be carried out. The numerical modeling method and the various findings from the present work can provide an alternate method of analysis of slope failure which can give additional information not available from the classical methods of analysis.

The distributed failure probability approach to dependent failure analysis, and its application

International Nuclear Information System (INIS)

Hughes, R.P.

1989-01-01

The Distributed Failure Probability (DFP) approach to the problem of dependent failures in systems is presented. The basis of the approach is that the failure probability of a component is a variable. The source of this variability is the change in the 'environment' of the component, where the term 'environment' is used to mean not only obvious environmental factors such as temperature etc., but also such factors as the quality of maintenance and manufacture. The failure probability is distributed among these various 'environments' giving rise to the Distributed Failure Probability method. Within the framework which this method represents, modelling assumptions can be made, based both on engineering judgment and on the data directly. As such, this DFP approach provides a soundly based and scrutable technique by which dependent failures can be quantitatively assessed. (orig.)

Failure analysis of multiple delaminated composite plates due

Indian Academy of Sciences (India)

The present work aims at the first ply failure analysis of laminated composite plates with arbitrarily located multiple delaminations subjected to transverse static load as well as impact. The theoretical formulation is based on a simple multiple delamination model. Conventional first order shear deformation is assumed using ...

Gall-forming insects in a lowland tropical rainforest: low species diversity in an extremely specialised quild

Czech Academy of Sciences Publication Activity Database

Butterill, Philip T.; Novotný, Vojtěch

2015-01-01

Roč. 40, č. 4 (2015), s. 409-419 ISSN 0307-6946 R&D Projects: GA ČR GA13-10486S Grant - others:European Social Fund(CZ) CZ.1.07/2.3.00/20.0064; National Science Foundation(US) DEB 0515678; UK Darwin Initiative for the Survival Species(GB) 14/054 Institutional support: RVO:60077344 Keywords : gall-forming insects * host specificity * Papua New Guinea Subject RIV: EH - Ecology, Behaviour Impact factor: 1.687, year: 2015 http://onlinelibrary.wiley.com/doi/10.1111/een.12198/abstract

A new genus and species of gall midge (Diptera, Cecidomyiidae associated with Myrcia retorta (Myrtaceae Um novo gênero e espécie de mosquito galhador (Diptera, Cecidomyiidae associados com Myrcia retorta (Myrtaceae

Directory of Open Access Journals (Sweden)

Valéria Cid Maia

2009-01-01

Full Text Available Brethesia Maia, new genus and Brethesia myrciae Maia, new species of Cecidomyiidae are described and illustrated (male, female, pupa and gall based on material collected in Minas Gerais (Brazil. This new species induces leaf galls on Myrcia retorta (Myrtaceae.Brethesia myrciae, um novo gênero e espécie de Cecidomyiidae que induz galhas em Myrcia retorta (Myrtaceae são descritos e ilustrados (macho, fêmea, pupa e galha baseados em material coletado em Minas Gerais (Brazil.

77 FR 14446 - Changes to the Generic Aging Lessons Learned (GALL) Report Revision 2 AMP XI.M41, “Buried and...

Science.gov (United States)

2012-03-09

...) Report Revision 2 AMP XI.M41, ``Buried and Underground Piping and Tanks'' AGENCY: Nuclear Regulatory...), LR- ISG-2011-03, ``Changes to GALL Report Revision 2 Aging Management Program (AMP) XI.M41, `Buried... Report Revision 2 AMP XI.M41 based on the staff's review of several license renewal applications' buried...

Exploitation of a component event data bank for common cause failure analysis

International Nuclear Information System (INIS)

Games, A.M.; Amendola, A.; Martin, P.

1985-01-01

Investigations into using the European Reliability Data System Component Event Data Bank for common cause failure analysis have been carried out. Starting from early exercises where data were analyzed without computer aid, different types of linked multiple failures have been identified. A classification system is proposed based on this experience. It defines a multiple failure event space wherein each category defines causal, modal, temporal and structural links between failures. It is shown that a search algorithm which incorporates the specific interrogative procedures of the data bank can be developed in conjunction with this classification system. It is concluded that the classification scheme and the search algorithm are useful organizational tools in the field of common cause failures studies. However, it is also suggested that the use of the term common cause failure should be avoided since it embodies to many different types of linked multiple failures

Sensor Failure Detection of FASSIP System using Principal Component Analysis

Science.gov (United States)

Sudarno; Juarsa, Mulya; Santosa, Kussigit; Deswandri; Sunaryo, Geni Rina

2018-02-01

In the nuclear reactor accident of Fukushima Daiichi in Japan, the damages of core and pressure vessel were caused by the failure of its active cooling system (diesel generator was inundated by tsunami). Thus researches on passive cooling system for Nuclear Power Plant are performed to improve the safety aspects of nuclear reactors. The FASSIP system (Passive System Simulation Facility) is an installation used to study the characteristics of passive cooling systems at nuclear power plants. The accuracy of sensor measurement of FASSIP system is essential, because as the basis for determining the characteristics of a passive cooling system. In this research, a sensor failure detection method for FASSIP system is developed, so the indication of sensor failures can be detected early. The method used is Principal Component Analysis (PCA) to reduce the dimension of the sensor, with the Squarred Prediction Error (SPE) and statistic Hotteling criteria for detecting sensor failure indication. The results shows that PCA method is capable to detect the occurrence of a failure at any sensor.

Finite Element Creep-Fatigue Analysis of a Welded Furnace Roll for Identifying Failure Root Cause

Science.gov (United States)

Yang, Y. P.; Mohr, W. C.

2015-11-01

Creep-fatigue induced failures are often observed in engineering components operating under high temperature and cyclic loading. Understanding the creep-fatigue damage process and identifying failure root cause are very important for preventing such failures and improving the lifetime of engineering components. Finite element analyses including a heat transfer analysis and a creep-fatigue analysis were conducted to model the cyclic thermal and mechanical process of a furnace roll in a continuous hot-dip coating line. Typically, the roll has a short life, modeling heat convection from hot air inside the furnace. The creep-fatigue analysis was performed by inputting the predicted temperature history and applying mechanical loads. The analysis results showed that the failure was resulted from a creep-fatigue mechanism rather than a creep mechanism. The difference of material properties between the filler metal and the base metal is the root cause for the roll failure, which induces higher creep strain and stress in the interface between the weld and the HAZ.

A pragmatic approach to estimate alpha factors for common cause failure analysis

International Nuclear Information System (INIS)

Hassija, Varun; Senthil Kumar, C.; Velusamy, K.

2014-01-01

Highlights: • Estimation of coefficients in alpha factor model for common cause analysis. • A derivation of plant specific alpha factors is demonstrated. • We examine sensitivity of common cause contribution to total system failure. • We compare beta factor and alpha factor models for various redundant configurations. • The use of alpha factors is preferable, especially for large redundant systems. - Abstract: Most of the modern technological systems are deployed with high redundancy but still they fail mainly on account of common cause failures (CCF). Various models such as Beta Factor, Multiple Greek Letter, Binomial Failure Rate and Alpha Factor exists for estimation of risk from common cause failures. Amongst all, alpha factor model is considered most suitable for high redundant systems as it arrives at common cause failure probabilities from a set of ratios of failures and the total component failure probability Q T . In the present study, alpha factor model is applied for the assessment of CCF of safety systems deployed at two nuclear power plants. A method to overcome the difficulties in estimation of the coefficients viz., alpha factors in the model, importance of deriving plant specific alpha factors and sensitivity of common cause contribution to the total system failure probability with respect to hazard imposed by various CCF events is highlighted. An approach described in NUREG/CR-5500 is extended in this study to provide more explicit guidance for a statistical approach to derive plant specific coefficients for CCF analysis especially for high redundant systems. The procedure is expected to aid regulators for independent safety assessment

A statistical analysis of pellet-clad interaction failures in water reactor fuel

International Nuclear Information System (INIS)

McDonald, S.G.; Fardo, R.D.; Sipush, P.J.; Kaiser, R.S.

1981-01-01

The primary objective of the statistical analysis was to develop a mathematical function that would predict PCI fuel rod failures as a function of the imposed operating conditions. Linear discriminant analysis of data from both test and commercial reactors was performed. The initial data base used encompassed 713 data points (117 failures and 596 non-failures) representing a wide variety of water cooled reactor fuel (PWR, BWR, CANDU, and SGHWR). When applied on a best-estimate basis, the resulting function simultaneously predicts approximately 80 percent of both the failure and non-failure data correctly. One of the most significant predictions of the analysis is that relatively large changes in power can be tolerated when the pre-ramp irradiation power is low, but that only small changes in power can be tolerated when the pre-ramp irradiation power is high. However, it is also predicted that fuel rods irradiated at low power will fail at lower final powers than those irradiated at high powers. Other results of the analysis are that fuel rods with high clad operating temperatures can withstand larger power increases that fuel rods with low clad operating temperatures, and that burnup has only a minimal effect on PCI performance after levels of approximately 10000 MWD/MTU have been exceeded. These trends in PCI performance and the operating parameters selected are believed to be consistent with mechanistic considerations. Published PCI data indicate that BWR fuel usually operates at higher local powers and changes in power, lower clad temperatures, and higher local ramp rates than PWR fuel

Analysis of valve failures from the NUCLARR data base

International Nuclear Information System (INIS)

Moore, L.M.

1997-11-01

The Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR) contains data on component failures with categorical and qualifying information such as component design, normal operating state, system application and safety grade information which is important to the development of risk-based component surveillance testing requirements. This report presents descriptions and results of analyses of valve component failure data and covariate information available in the document Nuclear Computerized Library for Assessing Reactor Reliability Data Manual, Part 3: Hardware Component Failure Data (NUCLARR Data Manual). Although there are substantial records on valve performance, there are many categories of the corresponding descriptors and qualifying information for which specific values are missing. Consequently, this limits the data available for analysis of covariate effects. This report presents cross tabulations by different covariate categories and limited modeling of covariate effects for data subsets with substantive non-missing covariate information

Quantitative Approach to Failure Mode and Effect Analysis for Linear Accelerator Quality Assurance

Energy Technology Data Exchange (ETDEWEB)

O' Daniel, Jennifer C., E-mail: jennifer.odaniel@duke.edu; Yin, Fang-Fang

2017-05-01

Purpose: To determine clinic-specific linear accelerator quality assurance (QA) TG-142 test frequencies, to maximize physicist time efficiency and patient treatment quality. Methods and Materials: A novel quantitative approach to failure mode and effect analysis is proposed. Nine linear accelerator-years of QA records provided data on failure occurrence rates. The severity of test failure was modeled by introducing corresponding errors into head and neck intensity modulated radiation therapy treatment plans. The relative risk of daily linear accelerator QA was calculated as a function of frequency of test performance. Results: Although the failure severity was greatest for daily imaging QA (imaging vs treatment isocenter and imaging positioning/repositioning), the failure occurrence rate was greatest for output and laser testing. The composite ranking results suggest that performing output and lasers tests daily, imaging versus treatment isocenter and imaging positioning/repositioning tests weekly, and optical distance indicator and jaws versus light field tests biweekly would be acceptable for non-stereotactic radiosurgery/stereotactic body radiation therapy linear accelerators. Conclusions: Failure mode and effect analysis is a useful tool to determine the relative importance of QA tests from TG-142. Because there are practical time limitations on how many QA tests can be performed, this analysis highlights which tests are the most important and suggests the frequency of testing based on each test's risk priority number.

Quantitative Approach to Failure Mode and Effect Analysis for Linear Accelerator Quality Assurance.

Science.gov (United States)

O'Daniel, Jennifer C; Yin, Fang-Fang

2017-05-01

To determine clinic-specific linear accelerator quality assurance (QA) TG-142 test frequencies, to maximize physicist time efficiency and patient treatment quality. A novel quantitative approach to failure mode and effect analysis is proposed. Nine linear accelerator-years of QA records provided data on failure occurrence rates. The severity of test failure was modeled by introducing corresponding errors into head and neck intensity modulated radiation therapy treatment plans. The relative risk of daily linear accelerator QA was calculated as a function of frequency of test performance. Although the failure severity was greatest for daily imaging QA (imaging vs treatment isocenter and imaging positioning/repositioning), the failure occurrence rate was greatest for output and laser testing. The composite ranking results suggest that performing output and lasers tests daily, imaging versus treatment isocenter and imaging positioning/repositioning tests weekly, and optical distance indicator and jaws versus light field tests biweekly would be acceptable for non-stereotactic radiosurgery/stereotactic body radiation therapy linear accelerators. Failure mode and effect analysis is a useful tool to determine the relative importance of QA tests from TG-142. Because there are practical time limitations on how many QA tests can be performed, this analysis highlights which tests are the most important and suggests the frequency of testing based on each test's risk priority number. Copyright © 2017 Elsevier Inc. All rights reserved.

Probabilistic analysis of ''common mode failures''

International Nuclear Information System (INIS)

Easterling, R.G.

1978-01-01

Common mode failure is a topic of considerable interest in reliability and safety analyses of nuclear reactors. Common mode failures are often discussed in terms of examples: two systems fail simultaneously due to an external event such as an earthquake; two components in redundant channels fail because of a common manufacturing defect; two systems fail because a component common to both fails; the failure of one system increases the stress on other systems and they fail. The common thread running through these is a dependence of some sort--statistical or physical--among multiple failure events. However, the nature of the dependence is not the same in all these examples. An attempt is made to model situations, such as the above examples, which have been termed ''common mode failures.'' In doing so, it is found that standard probability concepts and terms, such as statistically dependent and independent events, and conditional and unconditional probabilities, suffice. Thus, it is proposed that the term ''common mode failures'' be dropped, at least from technical discussions of these problems. A corollary is that the complementary term, ''random failures,'' should also be dropped. The mathematical model presented may not cover all situations which have been termed ''common mode failures,'' but provides insight into the difficulty of obtaining estimates of the probabilities of these events

Statistical Analysis Of Failure Strength Of Material Using Weibull Distribution

International Nuclear Information System (INIS)

Entin Hartini; Mike Susmikanti; Antonius Sitompul

2008-01-01

In evaluation of ceramic and glass materials strength a statistical approach is necessary Strength of ceramic and glass depend on its measure and size distribution of flaws in these material. The distribution of strength for ductile material is narrow and close to a Gaussian distribution while strength of brittle materials as ceramic and glass following Weibull distribution. The Weibull distribution is an indicator of the failure of material strength resulting from a distribution of flaw size. In this paper, cumulative probability of material strength to failure probability, cumulative probability of failure versus fracture stress and cumulative probability of reliability of material were calculated. Statistical criteria calculation supporting strength analysis of Silicon Nitride material were done utilizing MATLAB. (author)

A novel phytomyxean parasite associated with galls on the bull-kelp Durvillaea antarctica (Chamisso) Hariot.

Science.gov (United States)

Goecke, Franz; Wiese, Jutta; Núñez, Alejandra; Labes, Antje; Imhoff, Johannes F; Neuhauser, Sigrid

2012-01-01

Durvillaea antarctica (Fucales, Phaeophyceae) is a large kelp of high ecological and economic significance in the Southern Hemisphere. In natural beds along the central coast of Chile (Pacific Ocean), abnormal growth characterized by evident gall development and discolorations of the fronds/thallus was observed. Analysing these galls by light microscopy and scanning electron microscopy revealed the presence of endophytic eukaryotes showing typical characteristics for phytomyxean parasites. The parasite developed within enlarged cells of the subcortical tissue of the host. Multinucleate plasmodia developed into many, single resting spores. The affiliation of this parasite to the Phytomyxea (Rhizaria) was supported by 18S rDNA data, placing it within the Phagomyxida. Similar microorganisms were already reported once 23 years ago, indicating that these parasites are persistent and widespread in D. antarctica beds for long times. The symptoms caused by this parasite are discussed along with the ecological and economic consequences. Phytomyxean parasites may play an important role in the marine ecosystem, but they remain understudied in this environment. Our results demonstrate for the first time the presence of resting spores in Phagomyxida, an order in which resting spores were thought to be absent making this the first record of a phagomyxean parasite with a complete life cycle so far, challenging the existing taxonomic concepts within the Phytomyxea. The importance of the here described resting spores for the survival and ecology of the phagomyxid parasite will be discussed together with the impact this parasite may have on 'the strongest seaweed of the world', which is an important habitat forming and economic resource from the Southern Hemisphere.

Evaluation of Analgesic Activity of the Methanol Extract from the Galls of Quercus infectoria (Olivier in Rats

Directory of Open Access Journals (Sweden)

Sook-Ha Fan

2014-01-01

Full Text Available The present study aims to investigate the analgesic activity of the methanol extract of the galls of Quercus infectoria in rats using hot plate and tail-flick methods. The extract was administered intraperitoneally at a dose of 20 mg/kg while morphine sulfate and sodium salicylate (10 mg/kg served as standards. The methanol extract exhibited significant analgesic activity in the tail-flick model (P<0.05 by increasing the reaction time of the rats to 8.0 sec at 30 min after treatment in comparison to control (4.4 sec. Morphine sulfate produced a reaction time of 11.9 sec in the same test. At the peak of activity (30 min, the extract produced maximum possible analgesia (MPA of 34.2%, whilst morphine sulfate achieved a peak MPA of 70.9%. No analgesic effects have been observed using sodium salicylate in the tail-flick model. In the same model, the extract and sodium salicylate demonstrated comparable reaction times. Tail-flick is a better method to evaluate analgesic activity as no significant results were observed for all treatments using hot plate with the exception of morphine sulfate, which showed significant results only at 45 and 60 min after treatment. In conclusion, the methanol extract of the galls of Quercus infectoria displayed analgesic activity.

Failure analysis and modeling of a multicomputer system. M.S. Thesis

Science.gov (United States)

Subramani, Sujatha Srinivasan

1990-01-01

This thesis describes the results of an extensive measurement-based analysis of real error data collected from a 7-machine DEC VaxCluster multicomputer system. In addition to evaluating basic system error and failure characteristics, we develop reward models to analyze the impact of failures and errors on the system. The results show that, although 98 percent of errors in the shared resources recover, they result in 48 percent of all system failures. The analysis of rewards shows that the expected reward rate for the VaxCluster decreases to 0.5 in 100 days for a 3 out of 7 model, which is well over a 100 times that for a 7-out-of-7 model. A comparison of the reward rates for a range of k-out-of-n models indicates that the maximum increase in reward rate (0.25) occurs in going from the 6-out-of-7 model to the 5-out-of-7 model. The analysis also shows that software errors have the lowest reward (0.2 vs. 0.91 for network errors). The large loss in reward rate for software errors is due to the fact that a large proportion (94 percent) of software errors lead to failure. In comparison, the high reward rate for network errors is due to fast recovery from a majority of these errors (median recovery duration is 0 seconds).

Failure characteristics analysis and fault diagnosis for liquid rocket engines

CERN Document Server

Zhang, Wei

2016-01-01

This book concentrates on the subject of health monitoring technology of Liquid Rocket Engine (LRE), including its failure analysis, fault diagnosis and fault prediction. Since no similar issue has been published, the failure pattern and mechanism analysis of the LRE from the system stage are of particular interest to the readers. Furthermore, application cases used to validate the efficacy of the fault diagnosis and prediction methods of the LRE are different from the others. The readers can learn the system stage modeling, analyzing and testing methods of the LRE system as well as corresponding fault diagnosis and prediction methods. This book will benefit researchers and students who are pursuing aerospace technology, fault detection, diagnostics and corresponding applications.

Advanced approaches to failure mode and effect analysis (FMEA applications

Directory of Open Access Journals (Sweden)

D. Vykydal

2015-10-01

Full Text Available The present paper explores advanced approaches to the FMEA method (Failure Mode and Effect Analysis which take into account the costs associated with occurrence of failures during the manufacture of a product. Different approaches are demonstrated using an example FMEA application to production of drawn wire. Their purpose is to determine risk levels, while taking account of the above-mentioned costs. Finally, the resulting priority levels are compared for developing actions mitigating the risks.

Failure analysis of storage tank component in LNG regasification unit using fault tree analysis method (FTA)

Science.gov (United States)

Mulyana, Cukup; Muhammad, Fajar; Saad, Aswad H.; Mariah, Riveli, Nowo

2017-03-01

Storage tank component is the most critical component in LNG regasification terminal. It has the risk of failure and accident which impacts to human health and environment. Risk assessment is conducted to detect and reduce the risk of failure in storage tank. The aim of this research is determining and calculating the probability of failure in regasification unit of LNG. In this case, the failure is caused by Boiling Liquid Expanding Vapor Explosion (BLEVE) and jet fire in LNG storage tank component. The failure probability can be determined by using Fault Tree Analysis (FTA). Besides that, the impact of heat radiation which is generated is calculated. Fault tree for BLEVE and jet fire on storage tank component has been determined and obtained with the value of failure probability for BLEVE of 5.63 × 10-19 and for jet fire of 9.57 × 10-3. The value of failure probability for jet fire is high enough and need to be reduced by customizing PID scheme of regasification LNG unit in pipeline number 1312 and unit 1. The value of failure probability after customization has been obtained of 4.22 × 10-6.

Does Andrews facial analysis predict esthetic sagittal maxillary position?

Science.gov (United States)

Resnick, Cory M; Daniels, Kimberly M; Vlahos, Maryann

2018-04-01

Cephalometric analyses have limited utility in planning maxillary sagittal position for orthognathic surgery. In Six Elements of Orofacial Harmony, Andrews quantified maxillary position relative to forehead projection and angulation and proposed an ideal relationship. The purpose of this study was to investigate the ability of this technique to predict esthetic sagittal maxillary position. Survey study including a male and female with straight facial profiles, normal maxillary incisor angulations, and Angle's Class I. Maxillary position was modified on lateral photographs to create 5 images for each participant with incisor-goal anterior limit line (GALL) distances of -4, -2, 0, +2, and +4 mm. A series of health care professionals and laypeople were asked to rate each photo in order of attractiveness. A total of 100 complete responses were received. Incisor-GALL distances of +4 mm (41%) and +2 mm (40%) were most commonly considered "most esthetic" for the female volunteer (P < .001). For the male volunteer, there were 2 peak "most esthetic" responses: incisor-GALL distances of 0 mm (37%) and -4 mm (32%) (P < .001). Respondents considered maxillary incisor position 2 to 4 mm anterior to GALL most attractive in a woman and 0 to 4 mm posterior to GALL most esthetic in a man. Using these modified target distances, this analysis may be useful for orthognathic surgery planning. Copyright © 2018 Elsevier Inc. All rights reserved.

1988 failure rate screening data for fusion reliability and risk analysis

International Nuclear Information System (INIS)

Cadwallader, L.C.; Piet, S.J.

1988-01-01

This document contains failure rate screening data for application to fusion components. The screening values are generally fission or aerospace industry failure rate estimates that can be extrapolated for use by fusion system designers, reliability engineers and risk analysts. Failure rate estimates for tritium-bearing systems, liquid metal-cooled systems, gas-cooled systems, water-cooled systems and containment systems are given. Preliminary system availability estimates and selected initiating event frequency estimates are presented. This first edition document is valuable to design and safety analysis for the Compact Ignition Tokamak and the International Thermonuclear Experimental Reactor. 20 refs., 28 tabs

Analysis approach for common cause failure on non-safety digital control system

Energy Technology Data Exchange (ETDEWEB)

Kim, Yun Goo; Oh, Eungse [Korea Hydro and Nuclear Power Co. Ltd., Daejeon (Korea, Republic of)

2014-05-15

The effects of common cause failure (CCF) on safety digital instrumentation and control (I and C) system had been considered in defense in depth and diversity coping analysis with safety analysis method. For the non-safety system, single failure had been considered for safety analysis. IEEE Std. 603-1991, Clause 5.6.3.1(2), 'Isolation' states that no credible failure on the non-safety side of an isolation device shall prevent any portion of a safety system from meeting its minimum performance requirements during and following any design basis event requiring that safety function. The software CCF is one of the credible failure on the non-safety side. In advanced digital I and C system, same hardware component is used for different control system and the defect in manufacture or common external event can generate CCF. Moreover, the non-safety I and C system uses complex software for its various function and software quality assurance for the development process is less severe than safety software for the cost effective design. Therefore the potential defects in software cannot be ignored and the effect of software CCF on non-safety I and C system is needed to be evaluated. This paper proposes the general process and considerations for the analysis of CCF on non-safety I and C system.

Phenomenological uncertainty analysis of early containment failure at severe accident of nuclear power plant

Energy Technology Data Exchange (ETDEWEB)

Lee, Su Won

2011-02-15

The severe accident has inherently significant uncertainty due to wide range of conditions and performing experiments, validation and practical application are extremely difficult because of its high temperature and pressure. Although internal and external researches were put into practice, the reference used in Korean nuclear plants were foreign data of 1980s and safety analysis as the probabilistic safety assessment has not applied the newest methodology. Also, it is applied to containment pressure formed into point value as results of thermal hydraulic analysis to identify the probability of containment failure in level 2 PSA. In this paper, the uncertainty analysis methods for phenomena of severe accident influencing early containment failure were developed, the uncertainty analysis that apply Korean nuclear plants using the MELCOR code was performed and it is a point of view to present the distribution of containment pressure as a result of uncertainty analysis. Because early containment failure is important factor of Large Early Release Frequency(LERF) that is used as representative criteria of decision-making in nuclear power plants, it was selected in this paper among various modes of containment failure. Important phenomena of early containment failure at severe accident based on previous researches were comprehended and methodology of 7th steps to evaluate uncertainty was developed. The MELCOR input for analysis of the severe accident reflected natural circulation flow was developed and the accident scenario for station black out that was representative initial event of early containment failure was determined. By reviewing the internal model and correlation for MELCOR model relevant important phenomena of early containment failure, the uncertainty factors which could affect on the uncertainty were founded and the major factors were finally identified through the sensitivity analysis. In order to determine total number of MELCOR calculations which can

Sensitivity analysis of fuel pin failure performance under slow-ramp type transient overpower condition by using a fuel performance analysis code FEMAXI-FBR

International Nuclear Information System (INIS)

Tsuboi, Yasushi; Ninokata, Hisashi; Endo, Hiroshi; Ishizu, Tomoko; Tatewaki, Isao; Saito, Hiroaki

2012-01-01

The FEMAXI-FBR is a fuel performance analysis code and has been developed as one module of core disruptive evaluation system, the ASTERIA-FBR. The FEMAXI-FBR has reproduced the failure pin behavior during slow transient overpower. The axial location of pin failure affects the power and reactivity behavior during core disruptive accident, and failure model of which pin failure occurs at upper part of pin is used by reflecting the results of the CABRI-2 test. By using the FEMAXI-FBR, sensitivity analysis of uncertainty of design parameters such as irradiation conditions and fuel fabrication tolerances was performed to clarify the effect on axial location of pin failure during slow transient overpower. The sensitivity analysis showed that the uncertainty of design parameters does not affect the failure location. It suggests that the failure model with which locations of failure occur at upper part of pin can be adopted for core disruptive calculation by taking into consideration of design uncertainties. (author)

Competing failure analysis in phased-mission systems with functional dependence in one of phases

International Nuclear Information System (INIS)

Wang, Chaonan; Xing, Liudong; Levitin, Gregory

2012-01-01

This paper proposes an algorithm for the reliability analysis of non-repairable phased-mission systems (PMS) subject to competing failure propagation and isolation effects. A failure originating from a system component which causes extensive damage to other system components is a propagated failure. When the propagated failure affects all the system components, causing the entire system failure, a propagated failure with global effect (PFGE) is said to occur. However, the failure propagation can be isolated in systems subject to functional dependence (FDEP) behavior, where the failure of a component (referred to as trigger component) causes some other components (referred to as dependent components) to become inaccessible or unusable (isolated from the system), and thus further failures from these dependent components have no effect on the system failure behavior. On the other hand, if any PFGE from dependent components occurs before the trigger failure, the failure propagation effect takes place, causing the overall system failure. In summary, there are two distinct consequences of a PFGE due to the competition between the failure isolation and failure propagation effects in the time domain. Existing works on such competing failures focus only on single-phase systems. However, many real-world systems are phased-mission systems (PMS), which involve multiple, consecutive and non-overlapping phases of operations or tasks. Consideration of competing failures for PMS is a challenging and difficult task because PMS exhibit dynamics in the system configuration and component behavior as well as statistical dependencies across phases for a given component. This paper proposes a combinatorial method to address the competing failure effects in the reliability analysis of binary non-repairable PMS. The proposed method is verified using a Markov-based method through a numerical example. Different from the Markov-based approach that is limited to exponential distribution, the

Preliminary failure modes and effects analysis on Korean HCCR TBS to be tested in ITER

International Nuclear Information System (INIS)

Ahn, Mu-Young; Cho, Seungyon; Jin, Hyung Gon; Lee, Dong Won; Park, Yi-Hyun; Lee, Youngmin

2015-01-01

Highlights: • Postulated initiating events are identified through failure modes and effects analysis on the current HCCR TBS design. • A set of postulated initiating events are selected for consideration of deterministic analysis. • Accident evolutions on the selected postualted initiating events are qualitatively described for deterministic analysis. - Abstract: Korean Helium cooled ceramic reflector (HCCR) Test blanket system (TBS), which comprises Test blanket module (TBM) and ancillary systems in various locations of ITER building, is operated at high temperature and pressure with decay heat. Therefore, safety is utmost concern in design process and it is required to demonstrate that the HCCR TBS is designed to comply with the safety requirements and guidelines of ITER. Due to complexity of the system with many interfaces with ITER, a systematic approach is necessary for safety analysis. This paper presents preliminary failure modes and effects analysis (FMEA) study performed for the HCCR TBS. FMEA is a systematic methodology in which failure modes for components in the system and their consequences are studied from the bottom-up. Over eighty failure modes have been investigated on the HCCR TBS. The failure modes that have similar consequences are grouped as postulated initiating events (PIEs) and total seven reference accident scenarios are derived from FMEA study for deterministic accident analysis. Failure modes not covered here due to evolving design of the HCCR TBS and uncertainty in maintenance procedures will be studied further in near future.

Preliminary failure modes and effects analysis on Korean HCCR TBS to be tested in ITER

Energy Technology Data Exchange (ETDEWEB)

Ahn, Mu-Young, E-mail: myahn74@nfri.re.kr [National Fusion Research Institute, Daejeon (Korea, Republic of); Cho, Seungyon [National Fusion Research Institute, Daejeon (Korea, Republic of); Jin, Hyung Gon; Lee, Dong Won [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Park, Yi-Hyun; Lee, Youngmin [National Fusion Research Institute, Daejeon (Korea, Republic of)

2015-10-15

Highlights: • Postulated initiating events are identified through failure modes and effects analysis on the current HCCR TBS design. • A set of postulated initiating events are selected for consideration of deterministic analysis. • Accident evolutions on the selected postualted initiating events are qualitatively described for deterministic analysis. - Abstract: Korean Helium cooled ceramic reflector (HCCR) Test blanket system (TBS), which comprises Test blanket module (TBM) and ancillary systems in various locations of ITER building, is operated at high temperature and pressure with decay heat. Therefore, safety is utmost concern in design process and it is required to demonstrate that the HCCR TBS is designed to comply with the safety requirements and guidelines of ITER. Due to complexity of the system with many interfaces with ITER, a systematic approach is necessary for safety analysis. This paper presents preliminary failure modes and effects analysis (FMEA) study performed for the HCCR TBS. FMEA is a systematic methodology in which failure modes for components in the system and their consequences are studied from the bottom-up. Over eighty failure modes have been investigated on the HCCR TBS. The failure modes that have similar consequences are grouped as postulated initiating events (PIEs) and total seven reference accident scenarios are derived from FMEA study for deterministic accident analysis. Failure modes not covered here due to evolving design of the HCCR TBS and uncertainty in maintenance procedures will be studied further in near future.

An analysis of human maintenance failures of a nuclear power plant

International Nuclear Information System (INIS)

Pyy, P.

2000-01-01

In the report, a study of faults caused by maintenance activities is presented. The objective of the study was to draw conclusions on the unplanned effects of maintenance on nuclear power plant safety and system availability. More than 4400 maintenance history reports from the years 1992-1994 of Olkiluoto BWR nuclear power plant (NPP) were analysed together with the maintenance personnel. The human action induced faults were classified, e.g., according to their multiplicity and effects. This paper presents and discusses the results of a statistical analysis of the data. Instrumentation and electrical components appeared to be especially prone to human failures. Many human failures were found in safety related systems. Several failures also remained latent from outages to power operation. However, the safety significance of failures was generally small. Modifications were an important source of multiple human failures. Plant maintenance data is a good source of human reliability data and it should be used more in the future. (orig.)

Genetic and biochemical basis of Gall Midge resistance in some cultivars of Indica Rice. Final report for the period 1 October 1980 - 30 November 1986

International Nuclear Information System (INIS)

Reddy, G.M.

1986-01-01

The stability of high productivity of modern rice varieties is greatly affected by insect pests. Rice gall midge is a serious insect pest of rice that is prevalent in several south eastern asian countries. Gall midge resistance has been mainly attributed to antibiosis. No progress has so far been made in identifying the exact biochemical nature of resistance. In Indica subspecies the understanding of chemical nature of disease would be helpful in the control of the disease and also in breeding programme aimed at developing resistance varieties. Studies were undertaken to establish the biochemical basis of resistance. Biochemical characterization of resistant and susceptible varieties were carried out. The parameters considered were: total sugar and reducing sugar content, total phenol content, amino acid profile, post infectional changes in sugar and phenol, isozyme studies. 2 figs, 6 tabs

Genetic and biochemical basis of Gall Midge resistance in some cultivars of Indica Rice. Final report for the period 1 October 1980 - 30 November 1986

Energy Technology Data Exchange (ETDEWEB)

Reddy, G M [Osmania Univ., Hyderabad (India). Dept. of Genetics

1987-12-31

The stability of high productivity of modern rice varieties is greatly affected by insect pests. Rice gall midge is a serious insect pest of rice that is prevalent in several south eastern asian countries. Gall midge resistance has been mainly attributed to antibiosis. No progress has so far been made in identifying the exact biochemical nature of resistance. In Indica subspecies the understanding of chemical nature of disease would be helpful in the control of the disease and also in breeding programme aimed at developing resistance varieties. Studies were undertaken to establish the biochemical basis of resistance. Biochemical characterization of resistant and susceptible varieties were carried out. The parameters considered were: total sugar and reducing sugar content, total phenol content, amino acid profile, post infectional changes in sugar and phenol, isozyme studies. 2 figs, 6 tabs.

Local buckling failure analysis of high-strength pipelines

Institute of Scientific and Technical Information of China (English)

Yan Li; Jian Shuai; Zhong-Li Jin; Ya-Tong Zhao; Kui Xu

2017-01-01

Pipelines in geological disaster regions typically suffer the risk of local buckling failure because of slender structure and complex load.This paper is meant to reveal the local buckling behavior of buried pipelines with a large diameter and high strength,which are under different conditions,including pure bending and bending combined with internal pressure.Finite element analysis was built according to previous data to study local buckling behavior of pressurized and unpressurized pipes under bending conditions and their differences in local buckling failure modes.In parametric analysis,a series of parameters,including pipe geometrical dimension,pipe material properties and internal pressure,were selected to study their influences on the critical bending moment,critical compressive stress and critical compressive strain of pipes.Especially the hardening exponent of pipe material was introduced to the parameter analysis by using the Ramberg-Osgood constitutive model.Results showed that geometrical dimensions,material and internal pressure can exert similar effects on the critical bending moment and critical compressive stress,which have different,even reverse effects on the critical compressive strain.Based on these analyses,more accurate design models of critical bending moment and critical compressive stress have been proposed for high-strength pipelines under bending conditions,which provide theoretical methods for highstrength pipeline engineering.

Recognition and Analysis of Corrosion Failure Mechanisms

OpenAIRE

Steven Suess

2006-01-01

Corrosion has a vast impact on the global and domestic economy, and currently incurs losses of nearly $300 billion annually to the U.S. economy alone. Because of the huge impact of corrosion, it is imperative to have a systematic approach to recognizing and mitigating corrosion problems as soon as possible after they become apparent. A proper failure analysis includes collection of pertinent background data and service history, followed by visual inspection, photographic documentation, materi...

A meta-analysis of the effects of β-adrenergic blockers in chronic heart failure.

Science.gov (United States)

Zhang, Xiaojian; Shen, Chengwu; Zhai, Shujun; Liu, Yukun; Yue, Wen-Wei; Han, Li

2016-10-01

Adrenergic β-blockers are drugs that bind to, but do not activate β-adrenergic receptors. Instead they block the actions of β-adrenergic agonists and are used for the treatment of various diseases such as cardiac arrhythmias, angina pectoris, myocardial infarction, hypertension, headache, migraines, stress, anxiety, prostate cancer, and heart failure. Several meta-analysis studies have shown that β-blockers improve the heart function and reduce the risks of cardiovascular events, rate of mortality, and sudden death through chronic heart failure (CHF) of patients. The present study identified results from recent meta-analyses of β-adrenergic blockers and their usefulness in CHF. Databases including Medline/Embase/Cochrane Central Register of Controlled Trials (CENTRAL), and PubMed were searched for the periods May, 1985 to March, 2011 and June, 2013 to August, 2015, and a number of studies identified. Results of those studies showed that use of β-blockers was associated with decreased sudden cardiac death in patients with heart failure. However, contradictory results have also been reported. The present meta-analysis aimed to determine the efficacy of β-blockers on mortality and morbidity in patients with heart failure. The results showed that mortality was significantly reduced by β-blocker treatment prior to the surgery of heart failure patients. The results from the meta-analysis studies showed that β-blocker treatment in heart failure patients correlated with a significant decrease in long-term mortality, even in patients that meet one or more exclusion criteria of the MERIT-HF study. In summary, the findings of the current meta-analysis revealed beneficial effects different β-blockers have on patients with heart failure or related heart disease.

Analysis of risk factors for cluster behavior of dental implant failures.

Science.gov (United States)

Chrcanovic, Bruno Ramos; Kisch, Jenö; Albrektsson, Tomas; Wennerberg, Ann

2017-08-01

Some studies indicated that implant failures are commonly concentrated in few patients. To identify and analyze cluster behavior of dental implant failures among subjects of a retrospective study. This retrospective study included patients receiving at least three implants only. Patients presenting at least three implant failures were classified as presenting a cluster behavior. Univariate and multivariate logistic regression models and generalized estimating equations analysis evaluated the effect of explanatory variables on the cluster behavior. There were 1406 patients with three or more implants (8337 implants, 592 failures). Sixty-seven (4.77%) patients presented cluster behavior, with 56.8% of all implant failures. The intake of antidepressants and bruxism were identified as potential negative factors exerting a statistically significant influence on a cluster behavior at the patient-level. The negative factors at the implant-level were turned implants, short implants, poor bone quality, age of the patient, the intake of medicaments to reduce the acid gastric production, smoking, and bruxism. A cluster pattern among patients with implant failure is highly probable. Factors of interest as predictors for implant failures could be a number of systemic and local factors, although a direct causal relationship cannot be ascertained. © 2017 Wiley Periodicals, Inc.

First record of Platygaster luteipes Buhl (Hymenoptera Platygastridae) from leaf galls on black pepper along with first report of the species from India

DEFF Research Database (Denmark)

Anjana, M.; Rajmohana, K.; Buhl, Peter Neerup

2016-01-01

Platygaster luteipes Buhl (Hymenoptera: Platygastridae) is reported for the first time from India. Several specimens of both sexes of the species were reared from the globular galls on mature leaves of black pepper. The hitherto undescribed male of the species is characterized and illustrated....

Corrosion failure analysis as related to prevention of corrosion failures

International Nuclear Information System (INIS)

Suss, H.

1977-10-01

The factors and conditions which have contributed to many of the corrosion related service failures are discussed based on a review of actual case histories. The anti-corrosion devices which developed as a result of these failure analyses are reviewed, and the method which must be adopted and used to take advantage of the available corrosion prevention techniques is discussed

Long-lasting complete response status of advanced stage IV gall bladder cancer and colon cancer after combined treatment including autologous formalin-fixed tumor vaccine: two case reports.

Science.gov (United States)

Imaoka, Yuki; Kuranishi, Fumito; Miyazaki, Tsubasa; Yasuda, Hiroko; Ohno, Tadao

2017-09-11

The prognosis of advanced (stage IV) cancer of the digestive organs is very poor. We have previously reported a case of advanced breast cancer with bone metastasis that was successfully treated with combined treatments including autologous formalin-fixed tumor vaccine (AFTV). Herein, we report the success of this approach in advanced stage IV (heavily metastasized) cases of gall bladder cancer and colon cancer. Case 1: A 61-year-old woman with stage IV gall bladder cancer (liver metastasis and lymph node metastasis) underwent surgery in May 2011, including partial resection of the liver. She was treated with AFTV as the first-line adjuvant therapy, followed by conventional chemotherapy. This patient is still alive without any recurrence, as confirmed with computed tomography, for more than 5 years. Case 2: A 64-year-old man with stage IV colon cancer (multiple para-aortic lymph node metastases and direct abdominal wall invasion) underwent non-curative surgery in May 2006. Following conventional chemotherapy, two courses of AFTV and radiation therapy were administered sequentially. This patient has had no recurrence for more than 5 years. We report the success of combination therapy including AFTV in cases of liver-metastasized gall bladder cancer and abdominal wall-metastasized colon cancer. Both patients experienced long-lasting, complete remission. Therefore, combination therapies including AFTV should be considered in patients with advanced cancer of the digestive organs.

Failure probability analysis on mercury target vessel

International Nuclear Information System (INIS)

Ishikura, Syuichi; Futakawa, Masatoshi; Kogawa, Hiroyuki; Sato, Hiroshi; Haga, Katsuhiro; Ikeda, Yujiro

2005-03-01

Failure probability analysis was carried out to estimate the lifetime of the mercury target which will be installed into the JSNS (Japan spallation neutron source) in J-PARC (Japan Proton Accelerator Research Complex). The lifetime was estimated as taking loading condition and materials degradation into account. Considered loads imposed on the target vessel were the static stresses due to thermal expansion and static pre-pressure on He-gas and mercury and the dynamic stresses due to the thermally shocked pressure waves generated repeatedly at 25 Hz. Materials used in target vessel will be degraded by the fatigue, neutron and proton irradiation, mercury immersion and pitting damages, etc. The imposed stresses were evaluated through static and dynamic structural analyses. The material-degradations were deduced based on published experimental data. As a result, it was quantitatively confirmed that the failure probability for the lifetime expected in the design is very much lower, 10 -11 in the safety hull, meaning that it will be hardly failed during the design lifetime. On the other hand, the beam window of mercury vessel suffered with high-pressure waves exhibits the failure probability of 12%. It was concluded, therefore, that the leaked mercury from the failed area at the beam window is adequately kept in the space between the safety hull and the mercury vessel by using mercury-leakage sensors. (author)

Dam failure analysis for the Lago El Guineo Dam, Orocovis, Puerto Rico

Science.gov (United States)

Gómez-Fragoso, Julieta; Heriberto Torres-Sierra,

2016-08-09

The U.S. Geological Survey, in cooperation with the Puerto Rico Electric Power Authority, completed hydrologic and hydraulic analyses to assess the potential hazard to human life and property associated with the hypothetical failure of the Lago El Guineo Dam. The Lago El Guineo Dam is within the headwaters of the Río Grande de Manatí and impounds a drainage area of about 4.25 square kilometers.The hydrologic assessment was designed to determine the outflow hydrographs and peak discharges for Lago El Guineo and other subbasins in the Río Grande de Manatí hydrographic basin for three extreme rainfall events: (1) a 6-hour probable maximum precipitation event, (2) a 24-hour probable maximum precipitation event, and (3) a 24-hour, 100-year recurrence rainfall event. The hydraulic study simulated a dam failure of Lago El Guineo Dam using flood hydrographs generated from the hydrologic study. The simulated dam failure generated a hydrograph that was routed downstream from Lago El Guineo Dam through the lower reaches of the Río Toro Negro and the Río Grande de Manatí to determine water-surface profiles developed from the event-based hydrologic scenarios and “sunny day” conditions. The Hydrologic Engineering Center’s Hydrologic Modeling System (HEC–HMS) and Hydrologic Engineering Center’s River Analysis System (HEC–RAS) computer programs, developed by the U.S. Army Corps of Engineers, were used for the hydrologic and hydraulic modeling, respectively. The flow routing in the hydraulic analyses was completed using the unsteady flow module available in the HEC–RAS model.Above the Lago El Guineo Dam, the simulated inflow peak discharges from HEC–HMS resulted in about 550 and 414 cubic meters per second for the 6- and 24-hour probable maximum precipitation events, respectively. The 24-hour, 100-year recurrence storm simulation resulted in a peak discharge of about 216 cubic meters per second. For the hydrologic analysis, no dam failure conditions are

Risk assessment of the emergency processes: Healthcare failure mode and effect analysis.

Science.gov (United States)

Taleghani, Yasamin Molavi; Rezaei, Fatemeh; Sheikhbardsiri, Hojat

2016-01-01

Ensuring about the patient's safety is the first vital step in improving the quality of care and the emergency ward is known as a high-risk area in treatment health care. The present study was conducted to evaluate the selected risk processes of emergency surgery department of a treatment-educational Qaem center in Mashhad by using analysis method of the conditions and failure effects in health care. In this study, in combination (qualitative action research and quantitative cross-sectional), failure modes and effects of 5 high-risk procedures of the emergency surgery department were identified and analyzed according to Healthcare Failure Mode and Effects Analysis (HFMEA). To classify the failure modes from the "nursing errors in clinical management model (NECM)", the classification of the effective causes of error from "Eindhoven model" and determination of the strategies to improve from the "theory of solving problem by an inventive method" were used. To analyze the quantitative data of descriptive statistics (total points) and to analyze the qualitative data, content analysis and agreement of comments of the members were used. In 5 selected processes by "voting method using rating", 23 steps, 61 sub-processes and 217 potential failure modes were identified by HFMEA. 25 (11.5%) failure modes as the high risk errors were detected and transferred to the decision tree. The most and the least failure modes were placed in the categories of care errors (54.7%) and knowledge and skill (9.5%), respectively. Also, 29.4% of preventive measures were in the category of human resource management strategy. "Revision and re-engineering of processes", "continuous monitoring of the works", "preparation and revision of operating procedures and policies", "developing the criteria for evaluating the performance of the personnel", "designing a suitable educational content for needs of employee", "training patients", "reducing the workload and power shortage", "improving team

Development of severe accident analysis code - Development of a finite element code for lower head failure analysis

Energy Technology Data Exchange (ETDEWEB)

Huh, Hoon; Lee, Choong Ho; Choi, Tae Hoon; Kim, Hyun Sup; Kim, Se Ho; Kang, Woo Jong; Seo, Chong Kwan [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1995-08-01

The study concerns the development of analysis models and computer codes for lower head failure analysis when a severe accident occurs in a nuclear reactor system. Although the lower head failure modes consists of several failure modes, the study this year was focused on the global rupture with the collapse pressure and mode by limit analysis and elastic deformation. The behavior of molten core causes elevation of temperature in the reactor vessel wall and deterioration of load-carrying capacity of a reactor vessel. The behavior of molten core and the heat transfer modes were, therefore, postulated in several types and the temperature distributions according to the assumed heat flux modes were calculated. The collapse pressure of a nuclear reactor lower head decreases rapidly with elevation of temperature as time passes. The calculation shows the safety of a nuclear reactor is enhanced with the lager collapse pressure when the hot spot is located far from the pole. 42 refs., 2 tabs., 31 figs. (author)

Analysis of Failure Causes and the Criticality Degree of Elements of Motor Vehicle’s Drum Brakes

Directory of Open Access Journals (Sweden)

D. Ćatić

2014-09-01

Full Text Available The introduction of the paper gives the basic concepts, historical development of methods of Fault Tree Analysis - FTA and Failure Modes, Effects and Criticality Analysis - FMECA for analysis of the reliability and safety of technical systems and importance of applying this method is highlighted. Failure analysis is particularly important for systems whose failures lead to the endangerment of people safety, such as, for example, the braking system of motor vehicles. For the failure analysis of the considered device, it is necessary to know the structure, functioning, working conditions and all factors that have a greater or less influence on its reliability. By formation of the fault tree of drum brakes in braking systems of commercial vehicles, it was established a causal relation between the different events that lead to a reduction in performance or complete failure of the braking system. Based on data from exploitation, using FMECA methods, determination of the criticality degree of drum brake’s elements on the reliable and safe operation of the braking system is performed.

[Examination of safety improvement by failure record analysis that uses reliability engineering].

Science.gov (United States)

Kato, Kyoichi; Sato, Hisaya; Abe, Yoshihisa; Ishimori, Yoshiyuki; Hirano, Hiroshi; Higashimura, Kyoji; Amauchi, Hiroshi; Yanakita, Takashi; Kikuchi, Kei; Nakazawa, Yasuo

2010-08-20

How the maintenance checks of the medical treatment system, including start of work check and the ending check, was effective for preventive maintenance and the safety improvement was verified. In this research, date on the failure of devices in multiple facilities was collected, and the data of the trouble repair record was analyzed by the technique of reliability engineering. An analysis of data on the system (8 general systems, 6 Angio systems, 11 CT systems, 8 MRI systems, 8 RI systems, and the radiation therapy system 9) used in eight hospitals was performed. The data collection period assumed nine months from April to December 2008. Seven items were analyzed. (1) Mean time between failures (MTBF) (2) Mean time to repair (MTTR) (3) Mean down time (MDT) (4) Number found by check in morning (5) Failure generation time according to modality. The classification of the breakdowns per device, the incidence, and the tendency could be understood by introducing reliability engineering. Analysis, evaluation, and feedback on the failure generation history are useful to keep downtime to a minimum and to ensure safety.

Statistical trend analysis methodology for rare failures in changing technical systems

International Nuclear Information System (INIS)

Ott, K.O.; Hoffmann, H.J.

1983-07-01

A methodology for a statistical trend analysis (STA) in failure rates is presented. It applies primarily to relatively rare events in changing technologies or components. The formulation is more general and the assumptions are less restrictive than in a previously published version. Relations of the statistical analysis and probabilistic assessment (PRA) are discussed in terms of categorization of decisions for action following particular failure events. The significance of tentatively identified trends is explored. In addition to statistical tests for trend significance, a combination of STA and PRA results quantifying the trend complement is proposed. The STA approach is compared with other concepts for trend characterization. (orig.)

A novel phytomyxean parasite associated with galls on the bull-kelp Durvillaea antarctica (Chamisso Hariot.

Directory of Open Access Journals (Sweden)

Franz Goecke

Full Text Available Durvillaea antarctica (Fucales, Phaeophyceae is a large kelp of high ecological and economic significance in the Southern Hemisphere. In natural beds along the central coast of Chile (Pacific Ocean, abnormal growth characterized by evident gall development and discolorations of the fronds/thallus was observed. Analysing these galls by light microscopy and scanning electron microscopy revealed the presence of endophytic eukaryotes showing typical characteristics for phytomyxean parasites. The parasite developed within enlarged cells of the subcortical tissue of the host. Multinucleate plasmodia developed into many, single resting spores. The affiliation of this parasite to the Phytomyxea (Rhizaria was supported by 18S rDNA data, placing it within the Phagomyxida. Similar microorganisms were already reported once 23 years ago, indicating that these parasites are persistent and widespread in D. antarctica beds for long times. The symptoms caused by this parasite are discussed along with the ecological and economic consequences. Phytomyxean parasites may play an important role in the marine ecosystem, but they remain understudied in this environment. Our results demonstrate for the first time the presence of resting spores in Phagomyxida, an order in which resting spores were thought to be absent making this the first record of a phagomyxean parasite with a complete life cycle so far, challenging the existing taxonomic concepts within the Phytomyxea. The importance of the here described resting spores for the survival and ecology of the phagomyxid parasite will be discussed together with the impact this parasite may have on 'the strongest seaweed of the world', which is an important habitat forming and economic resource from the Southern Hemisphere.

Persistent bacteraemia caused by Staphylococcus aureus in the gall bladder.

Science.gov (United States)

Yu, Alexander Tin Han; Cun, Tony; Benamu, Esther; Renault, Cybele

2017-11-08

Staphylococcus aureus bacteraemia (SAB) remains a complex disease with a high associated morbidity and mortality, especially when it is able to establish an occult nidus safe from antimicrobial eradication. Without rapid identification and intervention, the nidus can cause persistent relapse of disease, morbidity and mortality. Having a high clinical suspicion for the foci of occult S. aureus is important, and awareness of potential sites of infection is critical and can be life-saving.We present a unique case of a 65-year-old man with end-stage renal disease receiving haemodialysis who developed septic shock from SAB. Despite 18 days of appropriate antibiotics, the patient had persistent high-grade bacteraemia until his gall bladder was ultimately percutaneously drained. The day after drainage, he cleared his blood cultures, although he ultimately passed away as he decided to transition his care to focus on comfort measures. © BMJ Publishing Group Ltd (unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Prediction of hospital failure: a post-PPS analysis.

Science.gov (United States)

Gardiner, L R; Oswald, S L; Jahera, J S

1996-01-01

This study investigates the ability of discriminant analysis to provide accurate predictions of hospital failure. Using data from the period following the introduction of the Prospective Payment System, we developed discriminant functions for each of two hospital ownership categories: not-for-profit and proprietary. The resulting discriminant models contain six and seven variables, respectively. For each ownership category, the variables represent four major aspects of financial health (liquidity, leverage, profitability, and efficiency) plus county marketshare and length of stay. The proportion of closed hospitals misclassified as open one year before closure does not exceed 0.05 for either ownership type. Our results show that discriminant functions based on a small set of financial and nonfinancial variables provide the capability to predict hospital failure reliably for both not-for-profit and proprietary hospitals.

Analysis of failure and maintenance experiences of motor operated valves in a Finnish nuclear power plant

International Nuclear Information System (INIS)

Simola, K.; Laakso, K.

1992-01-01

Operating experiences from 1981 up to 1989 of totally 104 motor operated closing valves (MOV) in different safety systems at TVO I and II nuclear power units were analysed in a systematic way. The qualitative methods used were failure mode and effects analysis (FMEA) and maintenance effects and criticality analysis (MECA). The failure descriptions were obtained from power plant's computerized failure reporting system. The reported 181 failure events were reanalysed and sorted according to specific classifications developed for the MOV function. Filled FMEA and MECA sheets on individual valves were stored in a microcomputer data base for further analyses. Analyses were performed for the failed mechanical and electrical valve parts, ways of detection of failure modes, failure effects, and repair and unavailability times

Application of failure mode and effect analysis in an assisted reproduction technology laboratory.

Science.gov (United States)

Intra, Giulia; Alteri, Alessandra; Corti, Laura; Rabellotti, Elisa; Papaleo, Enrico; Restelli, Liliana; Biondo, Stefania; Garancini, Maria Paola; Candiani, Massimo; Viganò, Paola

2016-08-01

Assisted reproduction technology laboratories have a very high degree of complexity. Mismatches of gametes or embryos can occur, with catastrophic consequences for patients. To minimize the risk of error, a multi-institutional working group applied failure mode and effects analysis (FMEA) to each critical activity/step as a method of risk assessment. This analysis led to the identification of the potential failure modes, together with their causes and effects, using the risk priority number (RPN) scoring system. In total, 11 individual steps and 68 different potential failure modes were identified. The highest ranked failure modes, with an RPN score of 25, encompassed 17 failures and pertained to "patient mismatch" and "biological sample mismatch". The maximum reduction in risk, with RPN reduced from 25 to 5, was mostly related to the introduction of witnessing. The critical failure modes in sample processing were improved by 50% in the RPN by focusing on staff training. Three indicators of FMEA success, based on technical skill, competence and traceability, have been evaluated after FMEA implementation. Witnessing by a second human operator should be introduced in the laboratory to avoid sample mix-ups. These findings confirm that FMEA can effectively reduce errors in assisted reproduction technology laboratories. Copyright © 2016 Reproductive Healthcare Ltd. Published by Elsevier Ltd. All rights reserved.

Modeling of fast reactor cladding failure for hypothetical accident transient analysis

International Nuclear Information System (INIS)

Kramer, J.M.; DiMelfi, R.J.; Hughes, T.H.; Deitrich, L.W.

1979-01-01

An analysis is made of burst experiments performed on neutron irradiated cladding tubes. This is done by employing a generalized Voce equation to describe the mechanical deformation of type 316 stainless steel, combined with an empirical creep crack growth law, each modified to account for the effects of irradiation matrix hardening, and irradiation induced grain boundary embrittlement, respectively. The results of this analysis indicate that for large initial hoop stress, failure occurs at relatively low temperature and is controlled by the onset of plastic instability. The increase in failure temperature of irradiated material, in this low temperature region, is due to irradiation strengthening. Failure in the case of relatively small initial hoop stress occurs at high temperature where the Voce equation reduces to a power law creep formula. The ductility of irradiated material, in this high temperature region, is adequately described through the use of an empirical intergranular crack growth law used in conjunction with the creep law. The effect of neutron irradiation is to reduce the activation energy for crack propagation from the value for creep to some lower value correlated to independent Dorn rupture parameter measurements. The result is a predicted reduced ductility which translates into a reduction in failure temperature at a given hoop stress value for irradiated material. (orig.)

Elastic-plastic failure analysis of pressure burst tests of thin toroidal shells

International Nuclear Information System (INIS)

Jones, D.P.; Holliday, J.E.; Larson, L.D.

1998-07-01

This paper provides a comparison between test and analysis results for bursting of thin toroidal shells. Testing was done by pressurizing two toroidal shells until failure by bursting. An analytical criterion for bursting is developed based on good agreement between structural instability predicted by large strain-large displacement elastic-plastic finite element analysis and observed burst pressure obtained from test. The failures were characterized by loss of local stability of the membrane section of the shells consistent with the predictions from the finite element analysis. Good agreement between measured and predicted burst pressure suggests that incipient structural instability as calculated by an elastic-plastic finite element analysis is a reasonable way to calculate the bursting pressure of thin membrane structures

Duodeno gastric reflux in peptic ulcer disease: gall bladder emptying provoked by cholecystokinin or a fatty meal

International Nuclear Information System (INIS)

Harding, L.K.; Donovan, I.A.; Mosimann, F.; Drumm, J.; Alexander-Williams, J.

1986-01-01

A wide range of incidence of diodeno-gastric bile reflux has been reported in patients with duodenal ulcer (DU) or gastric ulcer (GU). Using either 100 units of CCK i/v or a fatty meal of 320 Cal containing 20 g fat to contract the gall bladder, we have investigated the incidence of reflux in 170 subjects: CCK (Control: 20; DU: 60; GU: 19), Meal (Control: 19; DU: 37; GU: 15). The CCK or meal was given in the supine subject 30 minutes after injection of 75 MBq sup(99m)Tc diethyl Hida. Reflux was considered present if labelled bile was seen in the stomach on 3 successive 2 minute gamma camera pictures. The percentage of patients showing reflux was as follows: CCK (Control: 45%; DU: 53%; GU: 58%), Meal (Control: 11%; DU: 24%; GU: 40%). These results have been compared using the Chi-squared test. There was no significant difference in the incidence of reflux between control, DU or GU patients either in the group of patients given CCK or a meal. However, reflux was more common after CCK than the meal in control subjects (p<0.05) and in those with DU (p<0.01) but not in those with GU. We conclude that the stimulus given to contract the gall bladder affects the incidence of reflux, and that any significant difference in reflux incidence of DU or GU patients may become apparent when more patients are studied. (Author)

Failure analysis of carbide fuels under transient overpower (TOP) conditions

International Nuclear Information System (INIS)

Nguyen, D.H.

1980-06-01

The failure of carbide fuels in the Fast Test Reactor (FTR) under Transient Overpower (TOP) conditions has been examined. The Beginning-of-Cycle Four (BOC-4) all-oxide base case, at $.50/sec ramp rate was selected as the reference case. A coupling between the advanced fuel performance code UNCLE-T and HCDA Code MELT-IIIA was necessary for the analysis. UNCLE-T was used to determine cladding failure and fuel preconditioning which served as initial conditions for MELT-III calculations. MELT-IIIA determined the time of molten fuel ejection from fuel pin

Agrobacterium arsenijevicii sp. nov., isolated from crown gall tumors on raspberry and cherry plum.

Science.gov (United States)

Kuzmanović, Nemanja; Puławska, Joanna; Prokić, Anđelka; Ivanović, Milan; Zlatković, Nevena; Jones, Jeffrey B; Obradović, Aleksa

2015-09-01

Two plant-tumorigenic strains KFB 330(T) and KFB 335 isolated from galls on raspberry (Rubus idaeus) in Serbia, and a non-pathogenic strain AL51.1 recovered from a cherry plum (Prunus cerasifera) tumor in Poland, were genotypically and phenotypically characterized. Phylogenetic reconstruction based on 16S rDNA placed them within the genus Agrobacterium, with A. nepotum as their closest relative. Multilocus sequence analysis (MLSA) based on the partial sequences of atpD, glnA, gyrB, recA and rpoB housekeeping genes suggested that these three strains represent a new Agrobacterium species, that clustered with type strains of A. nepotum, A. radiobacter, "A. fabrum" and A. pusense. This was further supported by average nucleotide identity values (Agrobacterium species. The major cellular fatty acids of the novel strains were 18:1 w7c (72.8-77.87%) and 16:0 (6.82-8.58%). Phenotypic features allowed their differentiation from closely related species. Polyphasic characterization showed that the three strains represent a novel species of the genus Agrobacterium, for which the name Agrobacterium arsenijevicii sp. nov. is proposed. The type strain of A. arsenijevicii is KFB 330(T) (= CFBP 8308(T) = LMG 28674(T)). Copyright © 2015 Elsevier GmbH. All rights reserved.

Epidemiology of cancers of the liver, gall bladder, extrahepatic bile duct and pancreas in Nagasaki city from 1973 to 1982 with reference to atomic bomb exposure

International Nuclear Information System (INIS)

Takeshima, Fuminao; Shimokawa, Isao; Takashima, Kazuhiko

1990-01-01

This epidemiology study included 808 cases of liver cancers, 378 cases of gall bladder and extrahepatic bile duct cancer, and 312 cases of pancreas cancer registered at the Nagasaki Tumor Registry from 1973 to 1982, with emphasis on the relationship of these cancers to radiation exposure. The incidence of liver, gall bladder and extrahepatic bile duct cancer in both sexes tended to be higher in A-bomb survivors than in the nonexposed population, but were particularly significantly higher in male A-bomb survivors in each age-adjusted relative risk group. The incidence of pancreas cancer in females tended to be higher among A-bomb survivors than in the nonexposed population, and age-adjusted relative risk was significantly higher for female A-bomb survivors. No significant differences in relative distribution of histological type between exposed and nonexposed groups was observed. (author)

Failure analysis of boiler tubes in lakhra coal power plant

International Nuclear Information System (INIS)

Shah, A.; Baluch, M.M.; Ali, A.

2010-01-01

Present work deals with the failure analysis of a boiler tube in Lakhra fluidized bed combustion power station. Initially, visual inspection technique was adopted to analyse the fractured surface. Detailed microstructural investigations of the busted boiler tube were carried out using light optical microscope and scanning electron microscope. The hardness tests were also performed. A 50 percent decrease in hardness of intact portion of the tube material and from area adjacent to failure was measured, which was found to be in good agreement with the wall thicknesses measured of the busted boiler tube i.e. 4 mm and 2 mm from unaffected portion and ruptured area respectively. It was concluded that the major cause of failure of boiler tube is erosion of material which occurs due the coal particles strike at the surface of the tube material. Since the temperature of boiler is not maintained uniformly. The variations in boiler temperature can also affect the material and could be another reason for the failure of the tube. (author)

[Retrieval and failure analysis of surgical implants in Brazil: the need for proper regulation].

Science.gov (United States)

Azevedo, Cesar R de Farias; Hippert, Eduardo

2002-01-01

This paper summarizes several cases of metallurgical failure analysis of surgical implants conducted at the Laboratory of Failure Analysis, Instituto de Pesquisas Tecnológicas (IPT), in Brazil. Failures with two stainless steel femoral compression plates, one stainless steel femoral nail plate, one Ti-6Al-4V alloy maxillary reconstruction plate, and five Nitinol wires were investigated. The results showed that the implants were not in accordance with ISO standards and presented evidence of corrosion-assisted fracture. Furthermore, some of the implants presented manufacturing/processing defects which also contributed to their premature failure. Implantation of materials that are not biocompatible may cause several types of adverse effects in the human body and lead to premature implant failure. A review of prevailing health legislation is needed in Brazil, along with the adoption of regulatory mechanisms to assure the quality of surgical implants on the market, providing for compulsory procedures in the reporting and investigation of surgical implants which have failed in service.

A massive expansion of effector genes underlies gall-formation in the wheat pest Mayetiola destructor

DEFF Research Database (Denmark)

Zhao, Chaoyang; Escalante, Lucio Navarro; Chen, Hang

2015-01-01

Gall-forming arthropods are highly specialized herbivores that, in combination with their hosts, produce extended phenotypes with unique morphologies [1]. Many are economically important, and others have improved our understanding of ecology and adaptive radiation [2]. However, the mechanisms...... in plants and E3-ligase-mimicking effectors in plant pathogenic bacteria. SSGP-71 proteins and wheat Skp proteins interact in vivo. Mutations in different SSGP-71 genes avoid the effector-triggered immunity that is directed by the wheat resistance genes H6 and H9. Results point to effectors as the agents...

Concurrent gall bladder, liver lobe torsion, and bile peritonitis in a German shepherd dog 2 months after gastric dilatation/volvulus gastropexy and splenectomy.

Science.gov (United States)

Tubby, Kurtis G

2013-08-01

Postmortem examination of a 7-year-old German shepherd dog which had gastric dilatation/volvulus and splenectomy 2 months earlier revealed that the right middle and quadrate liver lobes were diffusely congested and torsed. The gall bladder was grossly distended and torsed along its long axis and there was evidence of bile peritonitis.

Failure mode and effects analysis outputs: are they valid?

Science.gov (United States)

Shebl, Nada Atef; Franklin, Bryony Dean; Barber, Nick

2012-06-10

Failure Mode and Effects Analysis (FMEA) is a prospective risk assessment tool that has been widely used within the aerospace and automotive industries and has been utilised within healthcare since the early 1990s. The aim of this study was to explore the validity of FMEA outputs within a hospital setting in the United Kingdom. Two multidisciplinary teams each conducted an FMEA for the use of vancomycin and gentamicin. Four different validity tests were conducted: Face validity: by comparing the FMEA participants' mapped processes with observational work. Content validity: by presenting the FMEA findings to other healthcare professionals. Criterion validity: by comparing the FMEA findings with data reported on the trust's incident report database. Construct validity: by exploring the relevant mathematical theories involved in calculating the FMEA risk priority number. Face validity was positive as the researcher documented the same processes of care as mapped by the FMEA participants. However, other healthcare professionals identified potential failures missed by the FMEA teams. Furthermore, the FMEA groups failed to include failures related to omitted doses; yet these were the failures most commonly reported in the trust's incident database. Calculating the RPN by multiplying severity, probability and detectability scores was deemed invalid because it is based on calculations that breach the mathematical properties of the scales used. There are significant methodological challenges in validating FMEA. It is a useful tool to aid multidisciplinary groups in mapping and understanding a process of care; however, the results of our study cast doubt on its validity. FMEA teams are likely to need different sources of information, besides their personal experience and knowledge, to identify potential failures. As for FMEA's methodology for scoring failures, there were discrepancies between the teams' estimates and similar incidents reported on the trust's incident

Structures for common-cause failure analysis

International Nuclear Information System (INIS)

Vaurio, J.K.

1981-01-01

Common-cause failure methodology and terminology have been reviewed and structured to provide a systematical basis for addressing and developing models and methods for quantification. The structure is based on (1) a specific set of definitions, (2) categories based on the way faults are attributable to a common cause, and (3) classes based on the time of entry and the time of elimination of the faults. The failure events are then characterized by their likelihood or frequency and the average residence time. The structure provides a basis for selecting computational models, collecting and evaluating data and assessing the importance of various failure types, and for developing effective defences against common-cause failure. The relationships of this and several other structures are described

ANALYSIS OF RELIABILITY OF NONRECTORABLE REDUNDANT POWER SYSTEMS TAKING INTO ACCOUNT COMMON FAILURES

Directory of Open Access Journals (Sweden)

V. A. Anischenko

2014-01-01

Full Text Available Reliability Analysis of nonrestorable redundant power Systems of industrial plants and other consumers of electric energy was carried out. The main attention was paid to numbers failures influence, caused by failures of all elements of System due to one general reason. Noted the main possible reasons of common failures formation. Two main indicators of reliability of non-restorable systems are considered: average time of no-failure operation and mean probability of no-failure operation. Modeling of failures were carried out by mean of division of investigated system into two in-series connected subsystems, one of them indicated independent failures, but the other indicated common failures. Due to joined modeling of single and common failures resulting intensity of failures is the amount incompatible components: intensity statistically independent failures and intensity of common failures of elements and system in total.It is shown the influence of common failures of elements on average time of no-failure operation of system. There is built the scale of preference of systems according to criterion of  average time maximum of no-failure operation, depending on portion of common failures. It is noticed that such common failures don’t influence on the scale of preference, but  change intervals of time, determining the moments of systems failures and excepting them from the number of comparators. There were discussed two problems  of conditionally optimization of  systems’  reservation choice, taking into account their reliability and cost. The first problem is solved due to criterion of minimum cost of system providing mean probability of no-failure operation, the second problem is solved due to criterion of maximum of mean probability of no-failure operation with cost limitation of system.