WorldWideScience

Sample records for fw panel attachment

  1. Mechanical testing of a FW panel attachment system for ITER

    Oliva, Vladislav; Vaclavik, Jaroslav; Materna, Ales; Lorenzetto, Patrick; Furmanek, Andreas

    2009-01-01

    An objective of experiments and finite element simulations was to check the stiffness, the strength and the fatigue resistance of the attachment of the First Wall panels onto a shield block of blanket modules according to the ITER 2001 design. The panel has a poloidal key at the rear side (in so-called option A with the rear access bolting) and it is attached by means of special studs located on a key-way in the shield block. Special device for a test of stud tensile pre-load relaxation during a thermal cycling was developed. True-to-scale panels, the shield block mock-up and simplified studs were fabricated and the assembly was loaded alternatively by radial moment, poloidal force or poloidal moment simulating the loading during off-normal plasma operations. Thermal cycling led to an acceptable stud pre-load relaxation. Mechanical cycling caused neither the pre-load relaxation nor the loss of the contact in the key-way nor a damage of the attachment system. The combination of poloidal moment and radial force during vertical displacement events (VDEs) seems to be a most dangerous case because it could lead to the loss of the key-key-way contact.

  2. Analyses results of the EHF FW Panel with welded fingers

    Sviridenko, M.N.; Leshukov, A.Yu.; Razmerov, A.V.; Tomilov, S.N.; Danilov, I.V.; Strebkov, Yu.S.; Mazul, I.V.; Labusov, A.; Gervash, A.A.; Belov, A.V.; Semichev, D.

    2014-01-01

    Highlights: • The design of FW panel with welded fingers has been developed. • The FW panel with welded fingers has been analyzed. • The pressure drop in FW panel coolant path do not exceed allowable one. • The mass flow rate distribution between finger pairs are on acceptable level. • Temperatures in FW components do not exceed allowable one. - Abstract: According to Procurement Arrangement (PA) Russian Federation will procure 40% of enhanced heat flux first wall (FW) panels. The signing of PA is scheduled on November 2013. In framework of PA preparation the RF specialists perform EHF FW design optimization in order to provide the ability to operation of EHF FW panel under ITER conditions. This article contains the design description of EHF FW 14 developed by RF and following analysis have been performed: • Hydraulic analysis; • Transient thermal analysis; • Structural analysis. Analyses results show that new design of FW panel with two straight welds for finger fixation on FW beam developed by RF specialists can be used as a reference design for ITER blanket EHF FW panel loaded by 5 MW/m 2 peak heat flux

  3. Vibration Damping Via Acoustic Treatment Attached To Vehicle Body Panels

    Gambino, Carlo

    Currently, in the automotive industry, the control of noise and vibration is the subject of much research, oriented towards the creation of innovative solutions to improve the comfort of the vehicle and to reduce its cost and weight. This thesis fits into this particular framework, as it aims to investigate the possibility of integrating the functions of sound absorptioninsulation and vibration damping in a unique component. At present the bituminous viscoelastic treatments, which are bonded to the car body panels, take charge of the vibration damping, while the sound absorption and insulation is obtained by means of the poroacoustic treatments. The solution proposed here consists of employing porous materials to perform both these functions, thus allowing the partial or complete removal of the viscoelastic damping treatments from the car body. This should decrease the weight of the vehicle, reducing fuel consumption and emissions, and it might also benefit production costs.

  4. Prediction of the niche effect for single flat panels with or without attached sound absorbing materials.

    Sgard, Franck; Atalla, Noureddine; Nélisse, Hugues

    2015-01-01

    The sound transmission loss (STL) of a test sample measured in sound transmission facilities is affected by the opening in which it is located. This is called the niche effect. This paper uses a modal approach to study the STL of a rectangular plate with or without an attached porous material located inside a box-shaped niche. The porous material is modeled as a limp equivalent fluid. The proposed model is validated by comparison with finite element/boundary element computations. Using a condensation of the pressure fields in the niche, the niche effect is interpreted in terms of a modification of the modal blocked pressure fields acting on the panel induced by the front cavity and by a modification of the radiation efficiency of the panel modes due to the presence of the back cavity. The modal approach is then used to investigate the impact of (1) the presence of a porous material attached to the panel on the niche effect and (2) the niche effect on the assessment of the porous material insertion loss. A simplified model for the porous material based on a transfer matrix approach is also proposed to predict the STL of the system and its validity is discussed.

  5. Luminance and image quality analysis of an organic electroluminescent panel with a patterned microlens array attachment

    Lin, Hoang Yan; Chen, Kuan-Yu; Ho, Yu-Hsuan; Fang, Jheng-Hao; Hsu, Sheng-Chih; Lee, Jiun-Haw; Lin, Jia-Rong; Wei, Mao-Kuo

    2010-01-01

    Luminance and image quality observed from the normal direction of a commercial 2.0 inch panel based on organic electroluminescence (OEL) technology attached to regular and patterned microlens array films (MAFs) were studied and analyzed. When applying the regularly arranged MAF on the panel, a luminance enhancement of 23% was observed, accompanied by a reduction of the image quality index as low as 74%. By removing the microlenses on the emitting areas, the patterned MAF enhances the luminance efficiency of the OEL by 52% keeping the image quality index of the display as high as 94%, due to the effective light extraction in the glass substrate being less than the critical angle. 3D simulation based on a ray-tracing model was also established to investigate the spatial distribution of light rays radiated from an OEL pixel with different microstructures which showed consistent results with the experimental results

  6. Destructive analysis on the ITER FW small scale mock-ups

    Wang, Pinghuai; Chen, Jiming; Liu, Danhua; Jin, Fanya; Yang, Bo

    2015-01-01

    As one of the core components of ITER, the first wall (FW) panel of shield blanket defines a physical boundary for the plasma transients and exhausts the majority of the plasma heat flux. China will undertake 12.64% of FW manufacturing tasks, and all of them are enhanced heat flux (EHF) components which will suffer surface heat flux of 4 - 5 MW/m 2 . The FW will be manufactured by a combination technology of explosion bonding CuCrZr alloy/316L (N) stainless steel plate and hot iso-static pressing (HIP) joining of beryllium tiles/CuCrZr alloy. The Be/Cu joint qualities is the key issue for the manufacturing of the FW panels. Several small scale mock-ups were manufactured for the qualification of the HIP technology for the FW. To avoid the brittle Be-Cu phase formed during the HIPing process, different thick Ti and pure Cu were coated on the beryllium tiles before HIPing to CuCrZr alloy. Ultrasonic testing was conducted on the mock-ups and destructive analysis was carried out on the mock-ups. For the failed ones, the results show that in the UT indication area brittle fracture occurs at the Be/Ti interface and then Ti/Cu interface in other areas. Based on these results, the manufacturing technology was improved mainly on the beryllium tiles quality, coating process and canister design. (author)

  7. Design and fabrication methods of FW/blanket and vessel for ITER-FEAT

    Ioki, K. E-mail: iokik@itereu.de; Barabash, V.; Cardella, A.; Elio, F.; Kalinin, G.; Miki, N.; Onozuka, M.; Osaki, T.; Rozov, V.; Sannazzaro, G.; Utin, Y.; Yamada, M.; Yoshimura, H

    2001-11-01

    Design has progressed on the vacuum vessel and FW/blanket for ITER-FEAT. The basic functions and structures are the same as for the 1998 ITER design. Detailed blanket module designs of the radially cooled shield block with flat separable FW panels have been developed. The ITER blanket R and D program covers different materials and fabrication methods in order make a final selection based on the results. Separate manifolds have been designed and analysed for the blanket cooling. The vessel design with flexible support housings has been improved to minimise the number of continuous poloidal ribs. Most of the R and D performed so far during EDA are still applicable.

  8. Design and fabrication methods of FW/blanket and vessel for ITER-FEAT

    Ioki, K.; Barabash, V.; Cardella, A.; Elio, F.; Kalinin, G.; Miki, N.; Onozuka, M.; Osaki, T.; Rozov, V.; Sannazzaro, G.; Utin, Y.; Yamada, M.; Yoshimura, H.

    2001-01-01

    Design has progressed on the vacuum vessel and FW/blanket for ITER-FEAT. The basic functions and structures are the same as for the 1998 ITER design. Detailed blanket module designs of the radially cooled shield block with flat separable FW panels have been developed. The ITER blanket R and D program covers different materials and fabrication methods in order make a final selection based on the results. Separate manifolds have been designed and analysed for the blanket cooling. The vessel design with flexible support housings has been improved to minimise the number of continuous poloidal ribs. Most of the R and D performed so far during EDA are still applicable

  9. Attachments

    2000-01-01

    In this attachment to the Annual report 1999 of the Nuclear Regulatory Authority of the Slovak Republic (UJD) the economic and personnel data of the UJD, used abbreviations, as well as the International nuclear event scales - INES are presented. Professional level of staff of the UJD is influenced by the education structure of its staff, when nearly 75% of the total number of staff has a university degree. A of 31.12.1999 there were 79 employees as average calculated number. Financing of the regulator in 1999 was mainly provided from the state budget, which represented 96% of all expenditures. The total volume of expenditures for UJD activity funded from the state budget achieved as of 31.12.1999 Slovak crowns (SK) 67 067 thousands. In the main category of expenditures an amount of SK 63 499 thous. was used for current activities, and the difference of SK 3 587 thous. was used for raising capital assets. Significant increase expenditures in the evaluated year compared to the 1998 was caused by a special purpose payment made by the Slovakia into the Fund for reconstruction of the Chernobyl cover (SK 19 996 thous.) funded through the budget chapter of the regulator. In the structure of current expenditures the highest share is taken by current transfers to abroad in total of SK 22 543 thous., i.e. contribution to reconstruction of Chernobyl cover made to the EBRD and contributions to the Fund of Technical Co-operation of the IAEA. For procurement of goods and services an amount of SK 19 814 thous. was spent, of which SK 7 054 thous. was used for funding science and technology tasks which were contracted out. The decision-making process in performing state supervision forced UJD to contact out various expert opinions and studies, for which UJD paid SK 2 058 thous. in total. Other expenditures in a volume of SK 10 702 thous. represent travel expenses, goods and services for UJD, rent for offices and other inevitable expenses. Salaries of staff represented SK 15 953

  10. Design and fabrication methods of FW/blanket, divertor and vacuum vessel for ITER

    Ioki, K.; Barabash, V.; Cardella, A.; Elio, F.; Ibbott, C.; Janeschitz, G.; Johnson, G.; Kalinin, G.; Miki, N.; Onozuka, M.; Sannazzaro, G.; Tivey, R.; Utin, Y.; Yamada, M.

    2000-01-01

    Design has progressed on the vacuum vessel, FW/blanket and Divertor for the Reduced Technical Objective/Reduced Cost (RTO/RC) ITER. The basic functions and structures are the same as for the 1998 ITER design [K. Ioki et al., J. Nucl. Mater. 258-263 (1998) 74]. Design and fabrication methods of the components have been improved to achieve ∼50% reduction of the construction cost. Detailed blanket module designs with flat separable FW panels have been developed to reduce the fabrication cost and the future radioactive waste. Most of the R and D performed so far during the Engineering Design Activities (EDAs) are still applicable. Further cost reduction methods are also being investigated and additional R and D is being performed

  11. FW/Blanket and vacuum vessel for RTO/RC ITER

    Ioki, K.; Barabash, V.; Cardella, A.; Elio, F.; Iida, H.; Johnson, G.; Kalinin, G.; Miki, N.; Onozuka, M.; Sannazzaro, G.; Utin, Y.; Yamada, M.

    2000-01-01

    The design has progressed on the vacuum vessel and First Wall (FW)/blanket for the Reduced Technical Objective/Reduced Cost (RTO/RC) ITER. The basic functions and structures are the same as for the 1998 ITER design. The design has been improved to achieve, along with the size reduction, ∼50% target reduction of the fabrication cost. The number of blanket modules has been minimized according to smaller dimensions of the machine and a higher payload capacity of the blanket Remote Handling tool. A concept without the back plate has been designed and assessed. The blanket module concept with flat separable FW panels has been developed to reduce the fabrication cost and future radioactive waste

  12. Design and fabrication methods of FW/blanket, divertor and vacuum vessel for ITER

    Ioki, K. E-mail: iokik@itereu.deiokik@ipp.mpg.de; Barabash, V.; Cardella, A.; Elio, F.; Ibbott, C.; Janeschitz, G.; Johnson, G.; Kalinin, G.; Miki, N.; Onozuka, M.; Sannazzaro, G.; Tivey, R.; Utin, Y.; Yamada, M

    2000-12-01

    Design has progressed on the vacuum vessel, FW/blanket and Divertor for the Reduced Technical Objective/Reduced Cost (RTO/RC) ITER. The basic functions and structures are the same as for the 1998 ITER design [K. Ioki et al., J. Nucl. Mater. 258-263 (1998) 74]. Design and fabrication methods of the components have been improved to achieve {approx}50% reduction of the construction cost. Detailed blanket module designs with flat separable FW panels have been developed to reduce the fabrication cost and the future radioactive waste. Most of the R and D performed so far during the Engineering Design Activities (EDAs) are still applicable. Further cost reduction methods are also being investigated and additional R and D is being performed.

  13. Design and fabrication methods of FW/blanket, divertor and vacuum vessel for ITER

    Ioki, K.; Barabash, V.; Cardella, A.; Elio, F.; Ibbott, C.; Janeschitz, G.; Johnson, G.; Kalinin, G.; Miki, N.; Onozuka, M.; Sannazzaro, G.; Tivey, R.; Utin, Y.; Yamada, M.

    2000-12-01

    Design has progressed on the vacuum vessel, FW/blanket and Divertor for the Reduced Technical Objective/Reduced Cost (RTO/RC) ITER. The basic functions and structures are the same as for the 1998 ITER design [K. Ioki et al., J. Nucl. Mater. 258-263 (1998) 74]. Design and fabrication methods of the components have been improved to achieve ˜50% reduction of the construction cost. Detailed blanket module designs with flat separable FW panels have been developed to reduce the fabrication cost and the future radioactive waste. Most of the R&D performed so far during the Engineering Design Activities (EDAs) are still applicable. Further cost reduction methods are also being investigated and additional R&D is being performed.

  14. FW/Blanket and vacuum vessel for RTO/RC ITER

    Ioki, K. E-mail: iokik@itereu.de; Barabash, V.; Cardella, A.; Elio, F.; Iida, H.; Johnson, G.; Kalinin, G.; Miki, N.; Onozuka, M.; Sannazzaro, G.; Utin, Y.; Yamada, M

    2000-11-01

    The design has progressed on the vacuum vessel and First Wall (FW)/blanket for the Reduced Technical Objective/Reduced Cost (RTO/RC) ITER. The basic functions and structures are the same as for the 1998 ITER design. The design has been improved to achieve, along with the size reduction, {approx}50% target reduction of the fabrication cost. The number of blanket modules has been minimized according to smaller dimensions of the machine and a higher payload capacity of the blanket Remote Handling tool. A concept without the back plate has been designed and assessed. The blanket module concept with flat separable FW panels has been developed to reduce the fabrication cost and future radioactive waste.

  15. Acceptance of the 2017 F.W. Clarke Award

    McCubbin, Francis M.

    2018-03-01

    Thank you, Steelie, for that very kind and touching citation. Madam President and delegates of the 2017 Goldschmidt, I stand before you today both humbled and honored to receive the 2017F.W. Clarke Award from the Geochemical Society. It is quite intimidating to see the distinguished list of past recipients of this award. The accomplished careers of these individuals attest to the prestige of this great honor, and I consider myself fortunate to be listed among these individuals. Although I was elated by the news that I will receive this award, I also recognize that there are many other early career scientists that are equally deserving of such accolades. I consider it an honor to be part of such a strong community of early career geochemists, and I look forward to seeing the scientific accomplishments that will be achieved by our generation in the coming decades.

  16. Bandgap properties in locally resonant phononic crystal double panel structures with periodically attached spring–mass resonators

    Qian, Denghui, E-mail: qdhsd318@163.com; Shi, Zhiyu, E-mail: zyshi@nuaa.edu.cn

    2016-10-07

    Bandgap properties of the locally resonant phononic crystal double panel structure made of a two-dimensional periodic array of a spring–mass resonator surrounded by n springs (n equals to zero at the beginning of the study) connected between the upper and lower plates are investigated in this paper. The finite element method is applied to calculate the band structure, of which the accuracy is confirmed in comparison with the one calculated by the extended plane wave expansion (PWE) method and the transmission spectrum. Numerical results and further analysis demonstrate that two bands corresponding to the antisymmetric vibration mode open a wide band gap but is cut narrower by a band corresponding to the symmetric mode. One of the regulation rules shows that the lowest frequency on the symmetric mode band is proportional to the spring stiffness. Then, a new design idea of adding springs around the resonator in a unit cell (n is not equal to zero now) is proposed in the need of widening the bandwidth and lowering the starting frequency. Results show that the bandwidth of the band gap increases from 50 Hz to nearly 200 Hz. By introducing the quality factor, the regulation rules with the comprehensive consideration of the whole structure quality limitation, the wide band gap and the low starting frequency are also discussed. - Highlights: • The locally resonant double panel structure opens a band gap in the low frequency region. • The band gap is the coupling between the symmetric and antisymmetric vibration modes. • The band structure of the double panel is the evolution of that of the single plate. • By adding springs around the resonator in a unit cell, the bandwidth gets wider. • The band gap can be controlled by tuning the parameters.

  17. Advanced Time Approach of FW-H Equations for Predicting Noise

    Haiqing, Si; Yan, Shi; Shen, Wen Zhong

    2013-01-01

    An advanced time approach of Ffowcs Williams-Hawkings (FW-H) acoustic analogy is developed, and the integral equations and integral solution of FW-H acoustic analogy are derived. Compared with the retarded time approach, the transcendental equation need not to be solved in the advanced time...

  18. PS-FW: A Hybrid Algorithm Based on Particle Swarm and Fireworks for Global Optimization

    Chen, Shuangqing; Wei, Lixin; Guan, Bing

    2018-01-01

    Particle swarm optimization (PSO) and fireworks algorithm (FWA) are two recently developed optimization methods which have been applied in various areas due to their simplicity and efficiency. However, when being applied to high-dimensional optimization problems, PSO algorithm may be trapped in the local optima owing to the lack of powerful global exploration capability, and fireworks algorithm is difficult to converge in some cases because of its relatively low local exploitation efficiency for noncore fireworks. In this paper, a hybrid algorithm called PS-FW is presented, in which the modified operators of FWA are embedded into the solving process of PSO. In the iteration process, the abandonment and supplement mechanism is adopted to balance the exploration and exploitation ability of PS-FW, and the modified explosion operator and the novel mutation operator are proposed to speed up the global convergence and to avoid prematurity. To verify the performance of the proposed PS-FW algorithm, 22 high-dimensional benchmark functions have been employed, and it is compared with PSO, FWA, stdPSO, CPSO, CLPSO, FIPS, Frankenstein, and ALWPSO algorithms. Results show that the PS-FW algorithm is an efficient, robust, and fast converging optimization method for solving global optimization problems. PMID:29675036

  19. Progress in the design of Normal Heat Flux First Wall panels for ITER

    Cicero, Tindaro, E-mail: Tindaro.Cicero@f4e.europa.eu [Fusion for Energy, Josep Pla 2, Torres Diagonal Litoral B3, 08019 Barcelona (Spain); Jimenez, Marc; D’Amico, Gabriele; Pou, Jordi Ayneto; Dellopoulos, Georges; Alvaro, Elena; Cardenes, Sabas; Banetta, Stefano; Bellin, Boris; Zacchia, Francesco [Fusion for Energy, Josep Pla 2, Torres Diagonal Litoral B3, 08019 Barcelona (Spain); Calcagno, Barbara; Chappuis, Philippe; Gicquel, Stefan; Mitteau, Raphael; Raffray, Rene [ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St., Paul Lez Durance Cedex (France)

    2015-10-15

    Highlights: • Improved detail design of several NHF FW panels for ITER. • Implemented design solutions to improve the manufacturing of NHF FW panels. • Performed FEM simulations for the overall assessment of NHF FW panels. • Performed detailed analyses for integration of diagnostics in the NHF FW panels. - Abstract: A typical NHF FW panel consists of a series of fingers, which represent the elementary plasma facing units and are designed to withstand 15,000 cycles at 2 MW/m{sup 2}. The fingers are mechanically joined and supported by a back structural element or “supporting beam”. The structure of a finger is made of three different materials: stainless steel for the supporting structure, copper chromium zirconium for the heat sink, and beryllium as armour material. Due to their location and to the interfaces with other systems (e.g. Diagnostics, Remote Handling), the NHF FW panels are divided in different main and minor variants. The aim of this paper is to present the design work performed towards the PA signature. CAD detailed models have been created in CATIA for main and minor variants. Examples of local design solutions, as well as design work to achieve the global configuration of specific modules are provided. Finite Element (FE) analyses have been carried out, in order to simulate the operational scenario of ITER and assess the thermo-mechanical behaviour of the most important FW panels against the required design criteria. This design and analyses activity is required to progress towards the finalization of the detailed design of the NHF FW main and minor variants.

  20. Progress in the design of Normal Heat Flux First Wall panels for ITER

    Cicero, Tindaro; Jimenez, Marc; D’Amico, Gabriele; Pou, Jordi Ayneto; Dellopoulos, Georges; Alvaro, Elena; Cardenes, Sabas; Banetta, Stefano; Bellin, Boris; Zacchia, Francesco; Calcagno, Barbara; Chappuis, Philippe; Gicquel, Stefan; Mitteau, Raphael; Raffray, Rene

    2015-01-01

    Highlights: • Improved detail design of several NHF FW panels for ITER. • Implemented design solutions to improve the manufacturing of NHF FW panels. • Performed FEM simulations for the overall assessment of NHF FW panels. • Performed detailed analyses for integration of diagnostics in the NHF FW panels. - Abstract: A typical NHF FW panel consists of a series of fingers, which represent the elementary plasma facing units and are designed to withstand 15,000 cycles at 2 MW/m"2. The fingers are mechanically joined and supported by a back structural element or “supporting beam”. The structure of a finger is made of three different materials: stainless steel for the supporting structure, copper chromium zirconium for the heat sink, and beryllium as armour material. Due to their location and to the interfaces with other systems (e.g. Diagnostics, Remote Handling), the NHF FW panels are divided in different main and minor variants. The aim of this paper is to present the design work performed towards the PA signature. CAD detailed models have been created in CATIA for main and minor variants. Examples of local design solutions, as well as design work to achieve the global configuration of specific modules are provided. Finite Element (FE) analyses have been carried out, in order to simulate the operational scenario of ITER and assess the thermo-mechanical behaviour of the most important FW panels against the required design criteria. This design and analyses activity is required to progress towards the finalization of the detailed design of the NHF FW main and minor variants.

  1. Automatic mesh adaptivity for CADIS and FW-CADIS neutronics modeling of difficult shielding problems

    Ibrahim, A. M.; Peplow, D. E.; Mosher, S. W.; Wagner, J. C.; Evans, T. M.; Wilson, P. P.; Sawan, M. E.

    2013-01-01

    The CADIS and FW-CADIS hybrid Monte Carlo/deterministic techniques dramatically increase the efficiency of neutronics modeling, but their use in the accurate design analysis of very large and geometrically complex nuclear systems has been limited by the large number of processors and memory requirements for their preliminary deterministic calculations and final Monte Carlo calculation. Three mesh adaptivity algorithms were developed to reduce the memory requirements of CADIS and FW-CADIS without sacrificing their efficiency improvement. First, a macro-material approach enhances the fidelity of the deterministic models without changing the mesh. Second, a deterministic mesh refinement algorithm generates meshes that capture as much geometric detail as possible without exceeding a specified maximum number of mesh elements. Finally, a weight window coarsening algorithm de-couples the weight window mesh and energy bins from the mesh and energy group structure of the deterministic calculations in order to remove the memory constraint of the weight window map from the deterministic mesh resolution. The three algorithms were used to enhance an FW-CADIS calculation of the prompt dose rate throughout the ITER experimental facility. Using these algorithms resulted in a 23.3% increase in the number of mesh tally elements in which the dose rates were calculated in a 10-day Monte Carlo calculation and, additionally, increased the efficiency of the Monte Carlo simulation by a factor of at least 3.4. The three algorithms enabled this difficult calculation to be accurately solved using an FW-CADIS simulation on a regular computer cluster, obviating the need for a world-class super computer. (authors)

  2. ON THE NATURE OF THE TERTIARY COMPANION TO FW TAU: ALMA CO OBSERVATIONS AND SED MODELING

    Caceres, Claudio; Hardy, Adam; Schreiber, Matthias R.; Cánovas, Héctor [Instituto de Física y Astronomía, Universidad de Valparaíso, Av. Gran Bretaña 1111, 2360102 Valparaíso (Chile); Cieza, Lucas A. [Núcleo de Astronomía, Universidad Diego Portales, Av. Ejército 441, Santiago (Chile); Williams, Jonathan P. [Institute for Astronomy, University of Hawaii at Manoa, Honolulu, HI 96822 (United States); Hales, Antonio [Atacama Large Millimeter/Submillimeter Array, Joint ALMA Observatory, Alonso de Córdova 3107, Vitacura, 763-0355 Santiago (Chile); Pinte, Christophe [Univ. Grenoble Alpes, IPAG, CNRS, F-38000 Grenoble (France); Ménard, Francois [UMI-FCA, CNRS/INSU, UMI 3386 (France); Wahhaj, Zahed [European Southern Observatory, Av. Alonso de Córdova 3107, Vitacura, 19001 Santiago (Chile)

    2015-06-20

    It is thought that planetary mass companions may form through gravitational disk instabilities or core accretion. Identifying such objects in the process of formation would provide the most direct test for the competing formation theories. One of the most promising candidates for a planetary mass object still in formation is the third object in the FW Tau system. We present here ALMA cycle 1 observations confirming the recently published 1.3 mm detection of a dust disk around this third object and present for the first time a clear detection of a single peak {sup 12}CO (2–1) line, providing direct evidence for the simultaneous existence of a gas disk. We perform radiative transfer modeling of the third object in FW Tau and find that current observations are consistent with either a brown dwarf embedded in an edge-on disk or a planet embedded in a low inclination disk, which is externally irradiated by the binary companion. Further observations with ALMA, aiming for high SNR detections of non-contaminated gas lines, are required to conclusively unveil the nature of the third object in FW Tau.

  3. A simple in-vessel/FW component viewing system for SST-1

    Santra, Prosenjit; Biswas, Prabal; Vasava, Kirit R.; Jaiswal, Snehal; Parekh, Tejas; Chauhan, Pradeep; Patel, Hiteshkumar; Pradhan, Subrata

    2015-01-01

    A simple compact system is being proposed for in-situ visual inspection of around 3800 First Wall (FW) graphite (armour) tiles in the vacuum vessel of SST-1 tokamak. The 2 DOF, manual driven system (permanently stationed inside vacuum vessel behind outer passive stabilizer) at top and bottom mid-plane locations consist of a rack and pinion mechanism operating a arm with a CCD camera/LED mounted on it, moving over a cam profile to cover approximately 1/8 th of the toroidal span of the vacuum vessel both at interior top/bottom locations with in the FW modules. The camera and LED light should withstand the ultrahigh vacuum conditions, prolonged baking temperatures of around 200°C along with high electromagnetic forces inside the vessel. This system can be operated remotely in-between shots from outside the VV through a linear motion feed through providing linear moment to a rack and pinion mechanism connected to the arm. This mechanism provides a better viewing of the inside FW components and vessel wall surface of tokamak with simple engineering and operational effort. Any information can be acquired from system regarding damages to FWC due to interaction with plasma as well as damage of other support structures inside VV. In comparison to more complicated and complex inspection system used in other tokamaks, this mechanism can be used for frequent in vessel visual inspection, which limits the system to be small, simple, occupying less space and custom made. This system is cheap with a minimum time for realization of the concept. The paper will present the conceptual and engineering design aspect of the in-viewing system, CAD images, its advantages and limitations, camera and LED details, data acquisition and the present status of realization of the project. (author)

  4. ITER FW cooling by a flat channel, adapted to low flow rate and high pressure drop

    Ovchinnikov, I.B.; Bondarchuk, D.E.; Gervash, A.A.; Glazunov, D.A.; Komarov, A.O.; Kuznetsov, V.E.; Mazul, I.V.; Rulev, R.V.; Yablokov, N.A.

    2011-01-01

    Highlights: ► ITER FW cooling: pressure drop quotation must be assigned according to thermal load. ► Flat channel solutions with wide range (1:500) of hydraulic resistivity are presented. ► Simulations in Ansys CFX were carried out for presented designs. ► Usage of pressure drop quotation significantly reduces surface temperature. ► Experiments in TSEFEY-M facility confirm simulations. - Abstract: Application of hypervapotron (HV) to cool in-vessel components of ITER – divertor and first wall (FW) – is characterized by the same design load (5 MW/m 2 ) but water flow rate for FW is 8–9 times (almost by order!) less for parallel feeding elements so it seems it would be better to use other design. Several variants of a flat channel design different from HV are suggested that enable to adapt a channel to pressure quota up to 1 MPa and higher. A main feature of the suggested variants is a spiral or multi-spiral stream (flat multi spiral––FMS) that improves heat rejection and can be obtained both by exciting of such mode and forced by channel geometry. Comparison of the variants was carried out in simulations (Ansys CFX) as well as in experiments on the TSEFEY-M facility with electron-beam gun. It is shown that excitation of a spiral stream in a channel significantly reduces a temperature of a loaded surface of a channel. Miniature thermocouples were used to measure temperature near the surface.

  5. The Contribution of F.W. Taylor to Industrial and Organizational Psychology

    E. C. Thomas

    1982-11-01

    In die artikel word getoon dat F.W. Taylor die erkende "vader van wetenskaplike bestuur" ook erkenning behoort te geniet as grondlegger van die Bedryf en -organisasiesielkunde. Sy werk op die terreine van prestasiemotivering en tevredenheid, opleiding, plasing van werkers, bestuurs- en organisasieontwikkeling en arbeidsverhoudinge het waarskynlik die werk van erkende sielkundiges op hierdie gebiede vooruitgeloop, of grondslag daarvoor gelê. Daar word tot die slotsom gekom dat alhoewel Taylor nie 'n opgeleide sielkundige was nie, hy en sy kollegas erkenning moet kry vir die praktiese implimentering van die beginsels en teorieë van die moderne Bedryf- en Organisasiesielkunde.

  6. Experiments on FW-IBW mode conversion heating combined with LHCD on Tore Supra

    Basiuk, V.; Becoulet, A.; Imbeaux, F.; Nguyen, F.; Peysson, Y.; Monakhov, I.; Petrov, Y.; Petrov, Y.

    1999-01-01

    Recent RF heating and current drive investigations revealed a growing interest in a scheme based on mode conversion (MC) of externally excited fast waves (FW) to ion Bernstein waves (IBW). Suitability of MC scheme for on/off axis electron heating has already been reported on Tore Supra. New results, which were obtained during MC experiments combined with Low Hybrid Current Drive (LHCD) are presented in this paper. Application of new experimental tools and numerical techniques provided better insight into the problem of MC power deposition. an outcome of active search for synergistic LHCD-IBW current drive effects is also reported

  7. Mounting clips for panel installation

    Cavieres, Andres; Al-Haddad, Tristan; Goodman, Joseph

    2017-07-11

    A photovoltaic panel mounting clip comprising a base, central indexing tabs, flanges, lateral indexing tabs, and vertical indexing tabs. The mounting clip removably attaches one or more panels to a beam or the like structure, both mechanically and electrically. It provides secure locking of the panels in all directions, while providing guidance in all directions for accurate installation of the panels to the beam or the like structure.

  8. Monte-Carlo Orbit/Full Wave Simulation of Fast Alfven Wave (FW) Damping on Resonant Ions in Tokamaks

    Choi, M.; Chan, V.S.; Pinsker, R.I.; Tang, V.; Bonoli, P.; Wright, J.

    2005-01-01

    To simulate the resonant interaction of fast Alfven wave (FW) heating and Coulomb collisions on energetic ions, including finite orbit effects, a Monte-Carlo code ORBIT-RF has been coupled with a 2D full wave code TORIC4. ORBIT-RF solves Hamiltonian guiding center drift equations to follow trajectories of test ions in 2D axisymmetric numerical magnetic equilibrium under Coulomb collisions and ion cyclotron radio frequency quasi-linear heating. Monte-Carlo operators for pitch-angle scattering and drag calculate the changes of test ions in velocity and pitch angle due to Coulomb collisions. A rf-induced random walk model describing fast ion stochastic interaction with FW reproduces quasi-linear diffusion in velocity space. FW fields and its wave numbers from TORIC are passed on to ORBIT-RF to calculate perpendicular rf kicks of resonant ions valid for arbitrary cyclotron harmonics. ORBIT-RF coupled with TORIC using a single dominant toroidal and poloidal wave number has demonstrated consistency of simulations with recent DIII-D FW experimental results for interaction between injected neutral-beam ions and FW, including measured neutron enhancement and enhanced high energy tail. Comparison with C-Mod fundamental heating discharges also yielded reasonable agreement

  9. RELAP5/MOD2 calculation of OECD LOFT test LP-FW-01

    Croxfod, M.G.; Harwood, C.; Hall, P.C.

    1992-04-01

    RELAP5/MOD2 is being used by GDCD for calculation of certain small break loss-of-coolant accidents and pressurized transients in the Sizewell ''B'' PWR. To test the ability of RELAP5/MOD2 to model the primary feed-and-bleed recovery procedure following a complete loss- of-feedwater event, post test calculations have been carried out of OECD LOFT test LP-FW-01. This report describes the comparison between the code calculations and the test data. It is found that although the standard version of RELAP5/MOD2 gives a reasonable prediction of the experimental transient, the long term pressure history is better calculated with a modified code version containing a revised horizontal stratification entrainment model. The latter allows an improved calculation of entrainment of liquid from the hot leg into the surge line. RELAP5/MOD2 is found to give a more accurate simulation of the experimental transient than was achieved in previous UK studies using RETRAN-02/MOD2

  10. Large thermal protection system panel

    Weinberg, David J. (Inventor); Myers, Franklin K. (Inventor); Tran, Tu T. (Inventor)

    2003-01-01

    A protective panel for a reusable launch vehicle provides enhanced moisture protection, simplified maintenance, and increased temperature resistance. The protective panel includes an outer ceramic matrix composite (CMC) panel, and an insulative bag assembly coupled to the outer CMC panel for isolating the launch vehicle from elevated temperatures and moisture. A standoff attachment system attaches the outer CMC panel and the bag assembly to the primary structure of the launch vehicle. The insulative bag assembly includes a foil bag having a first opening shrink fitted to the outer CMC panel such that the first opening and the outer CMC panel form a water tight seal at temperatures below a desired temperature threshold. Fibrous insulation is contained within the foil bag for protecting the launch vehicle from elevated temperatures. The insulative bag assembly further includes a back panel coupled to a second opening of the foil bag such that the fibrous insulation is encapsulated by the back panel, the foil bag, and the outer CMC panel. The use of a CMC material for the outer panel in conjunction with the insulative bag assembly eliminates the need for waterproofing processes, and ultimately allows for more efficient reentry profiles.

  11. Mounting clips for panel installation

    Cavieres, Andres; Al-Haddad, Tristan; Goodman, Joseph; Valdes, Francisco

    2017-02-14

    An exemplary mounting clip for removably attaching panels to a supporting structure comprises a base, spring locking clips, a lateral flange, a lever flange, and a spring bonding pad. The spring locking clips extend upwardly from the base. The lateral flange extends upwardly from a first side of the base. The lateral flange comprises a slot having an opening configured to receive at least a portion of one of the one or more panels. The lever flange extends outwardly from the lateral flange. The spring bonding flange extends downwardly from the lever flange. At least a portion of the first spring bonding flange comprises a serrated edge for gouging at least a portion of the one or more panels when the one or more panels are attached to the mounting clip to electrically and mechanically couple the one or more panels to the mounting clip.

  12. The remote maintenance of mechanically attached first wall armour tiles in NET

    Reeve, T.; Shaw, R.; Suppan, A.; Haferkamp, B.

    1991-01-01

    Protection of a substantial proportion of the NET First Wall (FW) with low-Z armour is envisaged for at least the early operating period of the machine. This armour will take the form of carbon tiles directly attached to the FW. Complete coverage of the FW will require the installation of 20 000-40 000 tiles. The uncertainties existing in FW operating conditions make it difficult to predict the lifetime of the armour components. However, based on present experience, a number of component failures is to be expected in addition to the general wear by plasma erosion. Bearing in mind the hostile environment within the machine, the remote maintainability of these components is thus of fundamental importance and has strongly influenced their design. Mechanical attachment is considered to be the only viable approach for remotely maintainable armour tiles. A series of tools for mounting and demounting such tiles is currently under development at KfK, Karlsruhe. Handling trials are being carried out on a local FW mock-up to optimise the tile attachment designs for efficient remote handling, to provide input to the overall system design and to facilitate the progressive evolution of effective remote handling tools. Such, tools will subsequently be tested in conjunction with The NET Articulated Boom prototype articulated boom transporter to prove their fitness for purpose. The paper reports the current status of this work and outlines the design and principles of operation of the tools developed. The results and conclusions of the investigations to date, including any practical modifications considered necessary to either the original tile attachment arrangements or the preliminary tool designs, are presented. The philosophy behind the attachment and detachment procedures envisaged is also described. (orig.)

  13. Panel Analysis

    Brænder, Morten; Andersen, Lotte Bøgh

    2014-01-01

    Based on our 2013-article, ”Does Deployment to War Affect Soldiers' Public Service Motivation – A Panel Study of Soldiers Before and After their Service in Afghanistan”, we present Panel Analysis as a methodological discipline. Panels consist of multiple units of analysis, observed at two or more...... in research settings where it is not possible to distribute units of analysis randomly or where the independent variables cannot be manipulated. The greatest disadvantage in regard to using panel studies is that data may be difficult to obtain. This is most clearly vivid in regard to the use of panel surveys...... points in time. In comparison with traditional cross-sectional studies, the advantage of using panel studies is that the time dimension enables us to study effects. Whereas experimental designs may have a clear advantage in regard to causal inference, the strength of panel studies is difficult to match...

  14. Scoping Evaluation of the IRIS Radiation Environment by Using the FW-CADIS Method and SCALE MAVRIC Code

    Petrovic, B.

    2008-01-01

    IRIS is an advanced pressurized water reactor of integral configuration. This integral configuration with its relatively large reactor vessel and thick downcomer (1.7 m) results in a significant reduction of radiation field and material activation. It thus enables setting up aggressive dose reduction objectives, but at the same time presents challenges for the shielding analysis which needs to be performed over a large spatial domain and include flux attenuation by many orders of magnitude. The Monte Carlo method enables accurately representing irregular geometry and potential streaming paths, but may require significant computational efforts to reduce statistical uncertainty within the acceptable range. Variance reduction methods do exist, but they are designed to provide results for individual detectors and in limited regions, whereas in the scoping phase of IRIS shielding analysis the results are sought throughout the whole containment. To facilitate such analysis, the SCALE MAVRIC was employed. Based on the recently developed FW-CADIS method, MAVRIC uses forward and adjoint deterministic transport theory calculations to generate effective biasing parameters for Monte Carlo simulations throughout the problem. Previous studies have confirmed the potential of this method for obtaining Monte Carlo solutions with acceptable statistics over large spatial domains. The objective of this work was to evaluate the capability of the FW-CADIS/MAVRIC to efficiently perform the required shielding analysis of IRIS. For that purpose, a representative model was prepared, retaining the main problem characteristics, i.e., a large spatial domain (over 10 m in each dimension) and significant attenuation (over 12 orders of magnitude), but geometrically rather simplified. The obtained preliminary results indicate that the FW-CADIS method implemented through the MAVRIC sequence in SCALE will enable determination of radiation field throughout the large spatial domain of the IRIS nuclear

  15. Monte-Carlo Orbit/Full Wave Simulation of Fast Alfvén Wave (FW) Damping on Resonant Ions in Tokamaks

    Choi, M.; Chan, V. S.; Tang, V.; Bonoli, P.; Pinsker, R. I.; Wright, J.

    2005-09-01

    To simulate the resonant interaction of fast Alfvén wave (FW) heating and Coulomb collisions on energetic ions, including finite orbit effects, a Monte-Carlo code ORBIT-RF has been coupled with a 2D full wave code TORIC4. ORBIT-RF solves Hamiltonian guiding center drift equations to follow trajectories of test ions in 2D axisymmetric numerical magnetic equilibrium under Coulomb collisions and ion cyclotron radio frequency quasi-linear heating. Monte-Carlo operators for pitch-angle scattering and drag calculate the changes of test ions in velocity and pitch angle due to Coulomb collisions. A rf-induced random walk model describing fast ion stochastic interaction with FW reproduces quasi-linear diffusion in velocity space. FW fields and its wave numbers from TORIC are passed on to ORBIT-RF to calculate perpendicular rf kicks of resonant ions valid for arbitrary cyclotron harmonics. ORBIT-RF coupled with TORIC using a single dominant toroidal and poloidal wave number has demonstrated consistency of simulations with recent DIII-D FW experimental results for interaction between injected neutral-beam ions and FW, including measured neutron enhancement and enhanced high energy tail. Comparison with C-Mod fundamental heating discharges also yielded reasonable agreement.

  16. Concentrating photovoltaic solar panel

    Cashion, Steven A; Bowser, Michael R; Farrelly, Mark B; Hines, Braden E; Holmes, Howard C; Johnson, Jr., Richard L; Russell, Richard J; Turk, Michael F

    2014-04-15

    The present invention relates to photovoltaic power systems, photovoltaic concentrator modules, and related methods. In particular, the present invention features concentrator modules having interior points of attachment for an articulating mechanism and/or an articulating mechanism that has a unique arrangement of chassis members so as to isolate bending, etc. from being transferred among the chassis members. The present invention also features adjustable solar panel mounting features and/or mounting features with two or more degrees of freedom. The present invention also features a mechanical fastener for secondary optics in a concentrator module.

  17. Panel Session

    Bertelsen, Olav Wedege

    2004-01-01

    In this panel session, four researchers will discuss the role of a theoretical foundation, in particular AT, in the design of information technology based artefacts. The general discussion will take of from a specific examination of the ActAD approach.......In this panel session, four researchers will discuss the role of a theoretical foundation, in particular AT, in the design of information technology based artefacts. The general discussion will take of from a specific examination of the ActAD approach....

  18. Lipid Panel

    ... A routine cardiac risk assessment typically includes a fasting lipid panel. Beyond that, research continues into the usefulness of other non-traditional markers of cardiac risk, such as Lp-PLA 2 . A health practitioner may choose to evaluate one or more ...

  19. Paternal Attachment, Parenting Beliefs and Children's Attachment

    Howard, Kimberly S.

    2010-01-01

    Relationships between fathers' romantic attachment style, parenting beliefs and father-child attachment security and dependence were examined in a diverse sample of 72 fathers of young children. Paternal romantic attachment style was coded based on fathers' endorsement of a particular style represented in the Hazan and Shaver Three-Category…

  20. Panel discussion

    Anon.

    1980-01-01

    The panel discussion at the 10th Allianz Forum on 'Technology and Insurance' dealt with the following topics: New technologies: energy conversion (coal, petroleum, natural gas, nuclear energy, solar energy); infrastructure (transport, data processing); basic products (metallic materials, chemical products, pharmaceutical products); integrated products (microprocessors, production line machines) as well as new risks: political; general economic (financing, market structure); insurance-related, dangers to persons and property; reduction of risks. (orig.) [de

  1. Panel surveys

    MADRE, JL; ZUMKELLER, D; CHLOND, B; ARMOOGUM, J

    2004-01-01

    l'analyse du comportement humain constitue un enjeu important dans le domaine des transports, lequel se transforme radicalement sous la pression des évolutions économique, écologique et démographique. les premières grandes études ont commence il y a plus d'une dizaine d'années : parc auto sofres en france, puget sound panel a seattle. cet article fait le bilan de ces expériences et met en évidence les principaux problèmes méthodologiques rencontres tout en proposant de nouvelles directions d'...

  2. Thermophilic anaerobic co-digestion of organic fraction of municipal solid waste (OFMSW) with food waste (FW): Enhancement of bio-hydrogen production.

    Angeriz-Campoy, Rubén; Álvarez-Gallego, Carlos J; Romero-García, Luis I

    2015-10-01

    Bio-hydrogen production from dry thermophilic anaerobic co-digestion (55°C and 20% total solids) of organic fraction of municipal solid waste (OFMSW) and food waste (FW) was studied. OFMSW coming from mechanical-biological treatment plants (MBT plants) presents a low organic matter concentration. However, FW has a high organic matter content but several problems by accumulation of volatile fatty acids (VFAs) and system acidification. Tests were conducted using a mixture ratio of 80:20 (OFSMW:FW), to avoid the aforementioned problems. Different solid retention times (SRTs) - 6.6, 4.4, 2.4 and 1.9 days - were tested. It was noted that addition of food waste enhances the hydrogen production in all the SRTs tested. Best results were obtained at 1.9-day SRT. It was observed an increase from 0.64 to 2.51 L H2/L(reactor) day in hydrogen productivity when SRTs decrease from 6.6 to 1.9 days. However, the hydrogen yield increases slightly from 33.7 to 38 mL H2/gVS(added). Copyright © 2015 Elsevier Ltd. All rights reserved.

  3. Manufacturing routes for stainless steel first wall panels

    Bucci, Ph.; Federzoni, L.; Le Marois, G.; Lorenzetto, P.

    2001-01-01

    Hot isostatic pressing (HIP) techniques are being considered in the European Home Team as one of the fabrication routes to produce ITER-FEAT primary first wall panels (PFWP). To demonstrate the potential and the availability of such techniques, material development, innovative mock-up fabrications and numerical modeling for the production of near-net shape components are currently been studied by CEA/CEREM in collaboration with the EFDA-CSU Garching. The aim of this work is to investigate the manufacturing feasibility of advanced PFWP concepts, with reduced pitch between FW cooling channels and reduced material thickness between the FW cooling channels and the front surface, in order to improve the thermal fatigue performance of these concepts. In order to select the best fabrication route, two different manufacturing methods based on the HIP process are being considered. The first one consists in manufacturing of the first wall panel by a HIP forming technique. Mock-ups are made of a serpentine tube expanded into a proper matrix. 2-D computer modeling has been performed to estimate the serpentine deformation. The second manufacturing route is based on the powder HIP technique. Mock-ups have been made of a serpentine embedded into SS powder. In both cases, the objective was to obtain the minimum pitch between the stainless steel (SS) tubes and between the SS tubes and the front face

  4. Attachment and prejudice.

    Carnelley, Katherine B; Boag, Elle M

    2018-04-16

    There is a paucity of research that examines prejudice from an attachment theory perspective. Herein we make theoretical links between attachment patterns and levels of prejudice. Perceptions of outgroup threat, which activate the attachment system, are thought to lead to fear and prejudice for those high in attachment anxiety, and to distancing and prejudice for those high in attachment avoidance. We review the literature that examines the associations between attachment patterns and prejudice; evidence from attachment priming studies suggests a causal role of attachment security in reducing prejudice. We identify several mediators of these links: empathy, negative emotions, trust, social dominance orientation, romanticism, and contact quality. Future research should manipulate potential mediators and use psychophysiological assessments of threat. Copyright © 2018 Elsevier Ltd. All rights reserved.

  5. Attachment and social networks.

    Gillath, Omri; C Karantzas, Gery; Lee, Juwon

    2018-02-21

    The current review covers two lines of research linking attachment and social networks. One focuses on attachment networks (the people who fulfill one's attachment needs), examining composition and age-related differences pertaining to these networks. The other line integrates attachment with social network analysis to investigate how individual differences in adult attachment are associated with the management and characteristics (e.g., density, multiplexity, and centrality) of people's social networks. We show that most people's attachment networks are small and hierarchical, with one figure being the primary attachment figure (often a mother or romantic partner, depending on age). Furthermore, attachment style predicts network characteristics and management, such that insecurity is associated with less closeness, multiplexity, centrality, and poorer management (less maintenance, more dissolution). Copyright © 2018 Elsevier Ltd. All rights reserved.

  6. Belt attachment and system

    Schneider, Abraham D.; Davidson, Erick M.

    2018-03-06

    Disclosed herein is a belt assembly including a flexible belt with an improved belt attachment. The belt attachment includes two crossbars spaced along the length of the belt. The crossbars retain bearings that allow predetermined movement in six degrees of freedom. The crossbars are connected by a rigid body that attaches to the bearings. Implements that are attached to the rigid body are simply supported but restrained in pitching rotation.

  7. Electron-attachment processes

    Christophorou, L.G.; McCorkle, D.L.; Christodoulides, A.A.

    1982-01-01

    Topics covered include: (1) modes of production of negative ions, (2) techniques for the study of electron attachment processes, (3) dissociative electron attachment to ground-state molecules, (4) dissociative electron attachment to hot molecules (effects of temperature on dissociative electron attachment), (5) molecular parent negative ions, and (6) negative ions formed by ion-pair processes and by collisions of molecules with ground state and Rydberg atoms

  8. Attachment over Time.

    Lewis, Michael; Feiring, Candice; Rosenthal, Saul

    2000-01-01

    Examined continuity in attachment classification from infancy through adolescence and related it to autobiographical memories of childhood, divorce, and maladjustment in white middle-class children. Found no continuity in attachment classification from 1 to 18 years and no relation between infant attachment status and adolescent adjustment.…

  9. Attachment and Psychopathology

    Mehmet Fatih Ustundag

    2011-06-01

    Full Text Available The type of attachment defined in the early stages of life and thought to be continuous, is a phenomenon that shapes the pattern of how a person makes contact with others. The clinical appearance of every type of attachment is different and each one has prospective and retrospective phenomenological reflections. In all stages of life and in close relationships, it can be observed if a person gets in close contact with someone else and if this relation bears supportive and protective qualities. According to attachment theorists, once it is defined as safe or unsafe during nursing period, it shows little change. Starting from Bowlby’s work, unsafe attachment type is considered as the determining factor of psychopathology in the later periods of life, while safe attachment is considered as in relation with healthy processes. The nature’s original model is safe attachment. Anxious/indecisive attachment, an unsafe attachment type, is associated with anxiety disorders and depressive disorder, while avoidant attachment is associated with behavior disorder and other extroverted pathologies. Disorganized/disoriented attachment is considered to be together with dissociative disorder. The aim of this paper is to review attachment theory and the relation between attachment and psychopathology.

  10. Special Attachments. Module 19.

    South Carolina State Dept. of Education, Columbia. Office of Vocational Education.

    This module on special attachments, one in a series dealing with industrial sewing machines, their attachments, and operation, covers four topics: gauges; cording attachment; zipper foot; and hemming, shirring, and binding. For each topic these components are provided: an introduction, directions, an objective, learning activities, student…

  11. Panel Discussion

    Langer, James

    1997-03-01

    Panelists: Arthur Bienenstock, Stanford University Cherry Ann Murray, Lucent Technologies Venkatesh Narayanamurti, University of California-Santa Barbara Paul Peercy, SEMI-SEMATECH Robert Richardson, Cornell University James Roberto, Oak Ridge National Laboratory The Board on Physics and Astronomy is undertaking a series of reassessments of all branches of physics as the foundation of a new physics survey. As part of this project, a Committee on Condensed Matter and Materials Physics has been established under the leadership of Venkatesh Narayanamurti of the University of California-Santa Barbara. The committee has been working since June on a study that will include an illustrative recounting of major recent achievements; identification of new opportunities and challenges facing the field; and articulation-for leaders in government, industry, universities, and the public at large-of the important roles played by the field in modern society. An especially urgent issue is how to maintain the intellectual vitality of condensed matter and materials physics, and its contributions to the well-being of the United States, in an era of limited resources. The forum will feature a panel of materials researchers who are members of the Committee on Condensed Matter and Materials Physics. They will give a brief report on the status of the study and engage in a dialogue with the audience about issues facing the condensed matter and materials physics community. Broad community input is vital to the success of the study. Please come and make your voice heard!

  12. Hepatic (Liver) Function Panel

    ... Educators Search English Español Blood Test: Hepatic (Liver) Function Panel KidsHealth / For Parents / Blood Test: Hepatic (Liver) ... kidneys ) is working. What Is a Hepatic (Liver) Function Panel? A liver function panel is a blood ...

  13. Comprehensive metabolic panel

    Metabolic panel - comprehensive; Chem-20; SMA20; Sequential multi-channel analysis with computer-20; SMAC20; Metabolic panel 20 ... Chernecky CC, Berger BJ. Comprehensive metabolic panel (CMP) - blood. In: ... Tests and Diagnostic Procedures . 6th ed. St Louis, MO: ...

  14. Blade attachment assembly

    Garcia-Crespo, Andres Jose; Delvaux, John McConnell; Miller, Diane Patricia

    2016-05-03

    An assembly and method for affixing a turbomachine rotor blade to a rotor wheel are disclosed. In an embodiment, an adaptor member is provided disposed between the blade and the rotor wheel, the adaptor member including an adaptor attachment slot that is complementary to the blade attachment member, and an adaptor attachment member that is complementary to the rotor wheel attachment slot. A coverplate is provided, having a coverplate attachment member that is complementary to the rotor wheel attachment slot, and a hook for engaging the adaptor member. When assembled, the coverplate member matingly engages with the adaptor member, and retains the blade in the adaptor member, and the assembly in the rotor wheel.

  15. ATTACHMENT AND TRANSFER

    Pasare, Daniela

    2011-01-01

    Bowlby's concept of attachment and Freud's concept of transference are two of the most influential theories of how we construct mental representations of human relationships. The attachment’s theory offers one more strategy for the therapeutic approach. Factors that lead to a secure attachment between mother and child may also be applied to the relationship between patient and psychotherapist. Psychotherapy may help a patient create himself new attachment and relationship patterns. Creating a...

  16. On the orbit calculation of visual binaries with a very short arc: application to the PMS binary system, FW Tau AB

    Docobo, J. A.; Tamazian, V. S.; Campo, P. P.

    2018-05-01

    In the vast majority of cases when available astrometric measurements of a visual binary cover a very short orbital arc, it is practically impossible to calculate a good quality orbit. It is especially important for systems with pre-main-sequence components where standard mass-spectrum calibrations cannot be applied nor can a dynamical parallax be calculated. We have shown that the analytical method of Docobo allows us to put certain constraints on the most likely orbital solutions, using an available realistic estimate of the global mass of the system. As an example, we studied the interesting PMS binary, FW Tau AB, located in the Taurus-Auriga as well as investigated a range of its possible orbital solutions combined with an assumed distance between 120 and 160 pc. To maintain the total mass of FW Tau AB in a realistic range between 0.2 and 0.6M_{⊙}, minimal orbital periods should begin at 105, 150, 335, and 2300 yr for distances of 120, 130, 140, and 150 pc, respectively (no plausible orbits were found assuming a distance of 160 pc). An original criterion to establish the upper limit of the orbital period is applied. When the position angle in some astrometric measurements was flipped by 180°, orbits with periods close to 45 yr are also plausible. Three example orbits with periods of 44.6, 180, and 310 yr are presented.

  17. The state of art of the manufacturing technology of FW blanket and the development of mock-up for fusion reactor in Russia

    Baek, Jong Hyuk; Jeong, Y. H.; Park, J. Y.; Kim, J. H.; Kim, H. G.

    2004-08-01

    In early 1990s, Russia had carried out the performance tests to verify the optimization of Be tile geometry and the bonding integrity of small mock-up using a HHF (High Heat Flux) test and an in-pile test in a research reactor. They had obtained the reliability of the brazing technologies for the Be/Cu bonding. And they had manufactured the near real-size large mock-up (about 0.8 mm in length) to find the bonding integrity by a fast brazing technique. They had a satisfied results from the HHF test for the large mock-up. Additionally, an alternative FW mock-ups, which were manufactured by both casting and fast brazing techniques to reduce the joining parts, showed a good joining performance from the HHF test. Therefore, it was concluded that the fast brazing techniques could be strongly recommended as a one of the preferable joining techniques and be possible to apply to joining for the Be/Cu joining of FW blanket

  18. Methods for tube attachment in a heat exchange equipment

    Shilin, O.V.; Vasil'ev, V.B.

    1984-01-01

    Two main ways of attaching tubes to tube panels in heat exchange equipment are analyzed: expanding and pulse method (by explosion, for instance). Labour-consumption and cost price for the fastening of brass, perlitic and corrosion-resistant tubes for both of the methods are presented. The extent of fitting out with equipment for tube fixing and ways of testing the joints for attachment are evaluated. Measures for improving the joint quality and introduction of the advanced technology are suggested

  19. Attachment Theory and Mindfulness

    Snyder, Rose; Shapiro, Shauna; Treleaven, David

    2012-01-01

    We initiate a dialog between two central areas in the field of psychology today: attachment theory/research and mindfulness studies. The impact of the early mother-infant relationship on child development has been well established in the literature, with attachment theorists having focused on the correlation between a mother's capacity for…

  20. Attachment and psychosis

    Korver, N.

    2014-01-01

    The main goal of this thesis was to further our understanding of current psychosocial models by introducing attachment as a relevant developmental framework. Firstly, attachment theory provides a psychosocial model for a developmental pathway to psychosis. Secondly, after expression of psychotic

  1. Attachment Security and Pain

    Andersen, Tonny Elmose; Lahav, Yael; Defrin, Ruth

    2015-01-01

    The present study assesses for the first time, the possible disruption effect of posttraumatic stress symptoms (PTSS) with regard to the protective role of attachment on pain, among ex-POWs. While secure attachment seems to serve as a buffer, decreasing the perception of pain, this function may...

  2. The Attachment Imperative

    Navne, Laura Emdal; Svendsen, Mette Nordahl; Gammeltoft, Tine

    2017-01-01

    on social relations and point to the productive aspects of practices of distance and detachment. We show that while the NICU upholds an imperative of attachment independently of the infant's chances of survival, for parents, attachment is contingent on certain hesitations in relation to their infant. We...... argue that there are nuances in practices of relationmaking in need of more attention (i.e., the nexus of attachment and detachment). Refraining from touching, holding, and feeding their infants during critical periods, the parents enact detachment as integral to their practices of attachment....... Such “cuts” in parent–infant relations become steps on the way to securing the infant's survival and making kin(ship). We conclude that although infants may be articulated as “maybe‐lives” by staff, in the NICU as well as in Danish society, the ideal of attachment appears to leave little room for “maybe‐parents.”...

  3. Investigation of some cleaning surface treatments for the fabrication of ITER first wall panels by HIP

    Frayssines, P.E.; Bucci, P. [CEA Grenoble (DRT/LITEN/DTH), 38 (France); Vito, E. de [CEA Grenoble (LITEN/DTH/LCPEM), 38 (France); Lorenzetto, P. [2EFDA, Garching (Germany)

    2007-07-01

    Full text of publication follows: ITER First Wall (FW) panels are the innermost part of the ITER reactor. Metallic materials used for their manufacture are 316L(N)-IG stainless steel, a copper alloy and beryllium. Stainless steel material is a support structure for the copper alloy that serves as a heat sink material and also for the beryllium tiles that are a protective armour against the plasma. All these materials are bonded together by Hot Isostatic Pressing (HIP). Thus, several types of joints (Cu/Cu, Cu/SS, SS/SS or Cu/Be) are present in a FW panels. Their manufacturing requires a very strict and advanced metallic surface preparation in order to eliminate most of the organic or oxide layers that could prevent the diffusion process between the facing materials. In this field, our laboratory practice enables to obtain sufficiently clean metallic surfaces and high strength joints are obtained when small mockups are made. However, the manufacture of a large number of FW panels in the future requires to find a new cleaning process that is industrially relevant without a strong reduction of the joint's mechanical properties. In this paper we present our investigations to find an industrial solution to clean efficiently copper alloy and stainless steel materials in order to manufacture high strength Cu/Cu, SS/SS or Cu/SS joints. Products investigated are mainly acid liquids proposed by chemical Company and a more advanced technique that uses a plasma process. HIP joints are tested mechanically by making impact toughness and tensile measurements. Results obtained with these solutions are compared to those obtained in our Laboratory by using our own cleaning route. Moreover, XPS analyses are performed on small specimens that have been submitted to the same cleaning treatments in order to better understand the mechanical results of our specimens. (authors)

  4. Investigation of some cleaning surface treatments for the fabrication of ITER first wall panels by HIP

    Frayssines, P.E.; Bucci, P.; Vito, E. de; Lorenzetto, P.

    2007-01-01

    Full text of publication follows: ITER First Wall (FW) panels are the innermost part of the ITER reactor. Metallic materials used for their manufacture are 316L(N)-IG stainless steel, a copper alloy and beryllium. Stainless steel material is a support structure for the copper alloy that serves as a heat sink material and also for the beryllium tiles that are a protective armour against the plasma. All these materials are bonded together by Hot Isostatic Pressing (HIP). Thus, several types of joints (Cu/Cu, Cu/SS, SS/SS or Cu/Be) are present in a FW panels. Their manufacturing requires a very strict and advanced metallic surface preparation in order to eliminate most of the organic or oxide layers that could prevent the diffusion process between the facing materials. In this field, our laboratory practice enables to obtain sufficiently clean metallic surfaces and high strength joints are obtained when small mockups are made. However, the manufacture of a large number of FW panels in the future requires to find a new cleaning process that is industrially relevant without a strong reduction of the joint's mechanical properties. In this paper we present our investigations to find an industrial solution to clean efficiently copper alloy and stainless steel materials in order to manufacture high strength Cu/Cu, SS/SS or Cu/SS joints. Products investigated are mainly acid liquids proposed by chemical Company and a more advanced technique that uses a plasma process. HIP joints are tested mechanically by making impact toughness and tensile measurements. Results obtained with these solutions are compared to those obtained in our Laboratory by using our own cleaning route. Moreover, XPS analyses are performed on small specimens that have been submitted to the same cleaning treatments in order to better understand the mechanical results of our specimens. (authors)

  5. The state of the art report on the development of manufacturing technology of fusion reactor FW blanket and mock-up in Japan

    Park, J. Y.; Jeong, Y. H.; Baek, J. H.; Kim, J. H.; Kim, H. G

    2004-08-15

    The joining technology of first wall blanket has been developed by JAERI in collaboration with Kawasaki Heavy Industry, Isuau Motors and University of Tsukuba in Japan. A variety of joining technologies including HIP, brazing, casing and friction welding was applied to the manufacturing of SS/SS and Cu/SS joint. In Be/Cu joining, it was emphasized to find the optimal HIP temperature lower than 650 .deg. C in order to avoid excessive SS sensitization because the joining of Be tile to Cu heat sink is a final processing step in the manufacturing of FW blanket. The selected HIP condition were 620 .deg. C, 150MPa and 2hr with Cu interlayer. Sample tests for joints was completed by 1995. The small scale mockup was manufactured and its performance was qualified by end of 2000. From 2001, the manufacturing and the characterization has been carried out for the larger scale mockup.

  6. The state of the art report on the development of manufacturing technology of fusion reactor FW blanket and mock-up in Japan

    Park, J. Y.; Jeong, Y. H.; Baek, J. H.; Kim, J. H.; Kim, H. G.

    2004-08-01

    The joining technology of first wall blanket has been developed by JAERI in collaboration with Kawasaki Heavy Industry, Isuau Motors and University of Tsukuba in Japan. A variety of joining technologies including HIP, brazing, casing and friction welding was applied to the manufacturing of SS/SS and Cu/SS joint. In Be/Cu joining, it was emphasized to find the optimal HIP temperature lower than 650 .deg. C in order to avoid excessive SS sensitization because the joining of Be tile to Cu heat sink is a final processing step in the manufacturing of FW blanket. The selected HIP condition were 620 .deg. C, 150MPa and 2hr with Cu interlayer. Sample tests for joints was completed by 1995. The small scale mockup was manufactured and its performance was qualified by end of 2000. From 2001, the manufacturing and the characterization has been carried out for the larger scale mockup

  7. Assessing Attachment in Psychotherapy

    Talia, Alessandro; Miller-Bottome, Madeleine; Daniel, Sarah I.F.

    2017-01-01

    The authors present and validate the Patient Attachment Coding System (PACS), a transcript-based instrument that assesses clients' in-session attachment based on any session of psychotherapy, in multiple treatment modalities. One-hundred and sixty clients in different types of psychotherapy...... (cognitive–behavioural, cognitive–behavioural-enhanced, psychodynamic, relational, supportive) and from three different countries were administered the Adult Attachment Interview (AAI) prior to treatment, and one session for each client was rated with the PACS by independent coders. Results indicate strong...... inter-rater reliability, and high convergent validity of the PACS scales and classifications with the AAI. These results present the PACS as a practical alternative to the AAI in psychotherapy research and suggest that clinicians using the PACS can assess clients' attachment status on an ongoing basis...

  8. Hepatitis virus panel

    ... page: //medlineplus.gov/ency/article/003558.htm Hepatitis virus panel To use the sharing features on this page, please enable JavaScript. The hepatitis virus panel is a series of blood tests used ...

  9. Antinuclear antibody panel

    ... page: //medlineplus.gov/ency/article/003535.htm Antinuclear antibody panel To use the sharing features on this page, please enable JavaScript. The antinuclear antibody panel is a blood test that looks at ...

  10. Paneling architectural freeform surfaces

    Eigensatz, Michael; Kilian, Martin; Schiftner, Alexander; Mitra, Niloy J.; Pottmann, Helmut; Pauly, Mark

    2010-01-01

    with a selected technology at reasonable cost, while meeting the design intent and achieving the desired aesthetic quality of panel layout and surface smoothness. The production of curved panels is mostly based on molds. Since the cost of mold fabrication

  11. Additive manufacturing of ITER first wall panel parts by two approaches: Selective laser melting and electron beam melting

    Zhong, Yuan; Rännar, Lars-Erik; Wikman, Stefan; Koptyug, Andrey; Liu, Leifeng; Cui, Daqing; Shen, Zhijian

    2017-01-01

    Highlights: • A novel way using additive manufacturing to fabricated ITER First Wall Panel parts is proposed. • ITER First Wall Panel parts successfully manufactured by both SLM and EBM are compared. • Physical and mechanical properties of SLM and EBM SS316L are clearly compared. • Problems encountered for large scale part building were discussed and possible solutions are given. - Abstract: Fabrication of ITER First Wall (FW) Panel parts by two additive manufacturing (AM) technologies, selective laser melting (SLM) and electron beam melting (EBM), was supported by Fusion for Energy (F4E). For the first time, AM is applied to manufacture ITER In-Vessel parts with complex design. Fully dense SS316L was prepared by both SLM and EBM after developing optimized laser/electron beam parameters. Characterizations on the density, magnetic permeability, microstructure, defects and inclusions were carried out. Tensile properties, Charpy-impact properties and fatigue properties of SLM and EBM SS316L were also compared. ITER FW Panel parts were successfully fabricated by both SLM and EBM in a one-step building process. The SLM part has smoother surface, better size accuracy while the EBM part takes much less time to build. Issues with removing support structures might be solved by slightly changing the design of the internal cooling system. Further investigation of the influence of neutron irradiation on materials properties between the two AM technologies is needed.

  12. Additive manufacturing of ITER first wall panel parts by two approaches: Selective laser melting and electron beam melting

    Zhong, Yuan [Department of Materials and Environmental Chemistry, Arrhenius Laboratory, Stockholm University, SE-106 91 Stockholm (Sweden); Rännar, Lars-Erik [Department of Quality Technology, Mechanical Engineering and Mathematics, Sports Tech Research Centre, Mid Sweden University, SE-831 25 Östersund (Sweden); Wikman, Stefan [Fusion for Energy, Torres Diagonal Litoral B3, Josep Pla 2, 08019 Barcelona (Spain); Koptyug, Andrey [Department of Quality Technology, Mechanical Engineering and Mathematics, Sports Tech Research Centre, Mid Sweden University, SE-831 25 Östersund (Sweden); Liu, Leifeng; Cui, Daqing [Department of Materials and Environmental Chemistry, Arrhenius Laboratory, Stockholm University, SE-106 91 Stockholm (Sweden); Shen, Zhijian, E-mail: shen@mmk.su.se [Department of Materials and Environmental Chemistry, Arrhenius Laboratory, Stockholm University, SE-106 91 Stockholm (Sweden)

    2017-03-15

    Highlights: • A novel way using additive manufacturing to fabricated ITER First Wall Panel parts is proposed. • ITER First Wall Panel parts successfully manufactured by both SLM and EBM are compared. • Physical and mechanical properties of SLM and EBM SS316L are clearly compared. • Problems encountered for large scale part building were discussed and possible solutions are given. - Abstract: Fabrication of ITER First Wall (FW) Panel parts by two additive manufacturing (AM) technologies, selective laser melting (SLM) and electron beam melting (EBM), was supported by Fusion for Energy (F4E). For the first time, AM is applied to manufacture ITER In-Vessel parts with complex design. Fully dense SS316L was prepared by both SLM and EBM after developing optimized laser/electron beam parameters. Characterizations on the density, magnetic permeability, microstructure, defects and inclusions were carried out. Tensile properties, Charpy-impact properties and fatigue properties of SLM and EBM SS316L were also compared. ITER FW Panel parts were successfully fabricated by both SLM and EBM in a one-step building process. The SLM part has smoother surface, better size accuracy while the EBM part takes much less time to build. Issues with removing support structures might be solved by slightly changing the design of the internal cooling system. Further investigation of the influence of neutron irradiation on materials properties between the two AM technologies is needed.

  13. Expert panel on hydrogeology; report to AECL Research (1992)

    Domenico, P.A.; Grisak, G.E.; Schwartz, F.W.

    1995-02-01

    In 1992 AECL Research convened a panel of external hydrogeological experts consisting of P.A. Domenico, G.E. Grisak, and F.W. Schwartz, to review AECL's proposed approach to siting a geological repository in the rocks of the Canadian Shield for the safe disposal of Canada's nuclear fuel wastes. In particular the panel was asked to provide its opinion on 1) the soundness of the technical approach developed to characterize the groundwater flow systems for the purpose of selecting a location for a disposal vault, 2) the validity and effectiveness of the geological case study used to demonstrate the performance assessment methodology based on the hydrogeological conditions observed at the Whiteshell Research Area, and 3) the adequacy of the hydrogeological information that AECL proposes to use in its Environmental Impact Statement (EIS) of the disposal concept. This report presents the findings, conclusions and recommendations of the hydrogeology review panel. The report was submitted to AECL Research in 1992 December. (author). 24 refs., 2 tabs., 4 figs

  14. Superego: an attachment perspective.

    Holmes, Jeremy

    2011-10-01

    With the help of attachment theory and research, the paper attempts to broaden and build on classical and current views on the superego. Attachment theory's epigenetic approach and the concept of the subliminal superego are described. The superego, it is argued, is as much concerned with safety as sex. The superego is 'heir', not just to the Oedipus complex or Klein's pre-oedipal constellation, but also to the attachment relationship. Under favourable developmental conditions a 'mature superego' emerges, facilitating, in the presence of an internal secure base, maturational boundary crossings towards adult sexuality. In the light of the above, the paper reviews Lear's updating of Strachey's model of psychic change and explores the concept of transgression in relation to the 'professional superego', its development and maturation. Theoretical arguments are illustrated with clinical examples. Copyright © 2011 Institute of Psychoanalysis.

  15. Fuel rod attachment system

    Christiansen, D.W.

    1982-01-01

    A reusable system for removably attaching a nuclear reactor fuel rod to a support member. A locking cap is secured to the fuel rod and a locking strip is fastened to the support member or vice versa. The locking cap has two opposing fingers and shaped to form a socket having a body portion. The locking strip has an extension shaped to rigidly attach to the socket's body portion. The locking cap's fingers are resiliently deflectable. For attachment, the locking cap is longitudinally pushed onto the locking strip causing the extension to temporarily deflect open the fingers to engage the socket's body portion. For removal, the process is reversed. In an alternative embodiment, the cap is rigid and the strip is transversely resiliently compressible. (author)

  16. Love attitudes and attachment

    María Elena Brenlla

    2016-02-01

    Full Text Available Love styles described by Lee are Eros (passionate love, Ludus (game-pla- ying love, Storge (friendship love, Mania (possessive, dependent love, Pragma (logical, “shopping list” love and Agape (all-giving, selfless love. Based on those types, Hendrick and Hendrick developed a 42-ítem rating questionnaire with 7 items measuring each love style (Love Attitudes Scale. Beside, inform about frequency in love relationships and attachment style. The purpose of this study was analyze the reliability and factor structure of the Love Attitudes Scale and to investigate the association between love attitudes and the attachment style. The results (N=280 participants indicate adequate internal consistency (alfa = 0,73. The items were intercorrelated and factored. The best solution extracted six factors using varimax rotation and all six factors accounted 41% of the total variance. Secure attachment was related positively to eros. 

  17. Paneling architectural freeform surfaces

    Eigensatz, Michael

    2010-07-26

    The emergence of large-scale freeform shapes in architecture poses big challenges to the fabrication of such structures. A key problem is the approximation of the design surface by a union of patches, socalled panels, that can be manufactured with a selected technology at reasonable cost, while meeting the design intent and achieving the desired aesthetic quality of panel layout and surface smoothness. The production of curved panels is mostly based on molds. Since the cost of mold fabrication often dominates the panel cost, there is strong incentive to use the same mold for multiple panels. We cast the major practical requirements for architectural surface paneling, including mold reuse, into a global optimization framework that interleaves discrete and continuous optimization steps to minimize production cost while meeting user-specified quality constraints. The search space for optimization is mainly generated through controlled deviation from the design surface and tolerances on positional and normal continuity between neighboring panels. A novel 6-dimensional metric space allows us to quickly compute approximate inter-panel distances, which dramatically improves the performance of the optimization and enables the handling of complex arrangements with thousands of panels. The practical relevance of our system is demonstrated by paneling solutions for real, cutting-edge architectural freeform design projects. © 2010 ACM.

  18. Paneling architectural freeform surfaces

    Eigensatz, Michael

    2010-07-25

    The emergence of large-scale freeform shapes in architecture poses big challenges to the fabrication of such structures. A key problem is the approximation of the design surface by a union of patches, so-called panels, that can be manufactured with a selected technology at reasonable cost, while meeting the design intent and achieving the desired aesthetic quality of panel layout and surface smoothness. The production of curved panels is mostly based on molds. Since the cost of mold fabrication often dominates the panel cost, there is strong incentive to use the same mold for multiple panels. We cast the major practical requirements for architectural surface paneling, including mold reuse, into a global optimization framework that interleaves discrete and continuous optimization steps to minimize production cost while meeting user-specified quality constraints. The search space for optimization is mainly generated through controlled deviation from the design surface and tolerances on positional and normal continuity between neighboring panels. A novel 6-dimensional metric space allows us to quickly compute approximate inter-panel distances, which dramatically improves the performance of the optimization and enables the handling of complex arrangements with thousands of panels. The practical relevance of our system is demonstrated by paneling solutions for real, cutting-edge architectural freeform design projects.

  19. Impact of Maternal Attachment Style on Mother to Infant Attachment

    Moghaddam Hoseini V

    2011-08-01

    Full Text Available Background and Objectives: Maternal attachment has the potential to affect both child development and parenting. As such, mother-infant attachment has been considered an important topic in recent years. The aim of this study was to determine the relationship between maternal adult attachment style, the maternal obstetric and demographic characteristics and mother-infant attachment.Methods: In this descriptive-correlational study, 102 women who had referred to health centers in Mashhad in 2008 and who had inclusion criteriawere selected using stratified cluster sampling. After interview about obstetric and demographic characteristics, they were asked to complete the "Revised Adult Attachment Scale" and "Mother to Infant Attachment Inventory" for assessment of maternal attachment style and mother-infant attachment 4-5 weeks after delivery. Data were analyzed by Pearson Correlation, Kruskal-wallis and Mann-whitney statistical tests.Results: In this study, themean of mother-infant attachment was found to be 97.486.12 and the mean of secure adult attachment was higher than that of other styles (16.893.97. Although, there were negative significant relationship between maternal avoidant style and mother-infant attachment (p=0.037,r=-0/20, there were no relationship between maternal age and education, parity, type of delivery and mother-infant attachment.Conclusion: The results of this research show that maternal attachment style is one of the factors of mother -infant attachment.

  20. Characterization of a novel alkaline arylsulfatase from Marinomonas sp. FW-1 and its application in the desulfation of red seaweed agar.

    Wang, Xueyan; Duan, Delin; Xu, Jiachao; Gao, Xin; Fu, Xiaoting

    2015-10-01

    A bacterial strain capable of hydrolyzing sulfate ester bonds of p-nitrophenyl sulfate (pNPS) and agar was isolated from the coast area of Qingdao, China. It was identified as Marinomonas based on its 16S rRNA gene sequence and named as Marinomonas sp. FW-1. An arylsulfatase with a recovery of 13 % and a fold of 12 was purified to a homogeneity using ion exchange and gel filtration chromatographies. The enzyme was composed of a single polypeptide chain with the molecular mass of 33 kDa estimated using SDS-PAGE. The optimal pH and temperature of arylsulfatase were pH 9.0 and 45, respectively. Arylsulfatase was stable over pH 8-11 and at temperature below 55 °C. The K m and V max of this enzyme for the hydrolysis of pNPS were determined to be 13.73 and 270.27 μM/min, respectively. The desulfation ratio against agar from red seaweed Gelidium amansii and Gracilaria lemaneiformis were 86.11 and 89.61 %, respectively. There was no difference between the DNA electrophoresis spectrum on the gel of the arylsulfatase-treated G. amansii agar and that of the commercial agarose. Therefore, this novel alkaline arylsulfatase might have a great potential for application in enzymatic conversion of agar to agarose.

  1. Application of the FW-CADIS variance reduction method to calculate a precise N-flux distribution for the FRJ-2 research reactor

    Abbasi, F.; Nabbi, R.; Thomauske, B.; Ulrich, J.

    2014-01-01

    For the decommissioning of nuclear facilities, activity and dose rate atlases (ADAs) are required to create and manage a decommissioning plan and optimize the radiation protection measures. By the example of the research reactor FRJ-2, a detailed MCNP model for Monte-Carlo neutron and radiation transport calculations based on a full scale outer core CAD-model was generated. To cope with the inadequacies of the MCNP code for the simulation of a large and complex system like FRJ-2, the FW-CADIS method was embedded in the MCNP simulation runs to optimise particle sampling and weighting. The MAVRIC sequence of the SCALE6 program package, capable of generating importance maps, was applied for this purpose. The application resulted in a significant increase in efficiency and performance of the whole simulation method and in optimised utilization of the computer resources. As a result, the distribution of the neutron flux in the entire reactor structures - as a basis for the generation of the detailed activity atlas - was produced with a low level of variance and a high level of spatial, numerical and statistical precision.

  2. Application of the FW-CADIS variance reduction method to calculate a precise N-flux distribution for the FRJ-2 research reactor

    Abbasi, F.; Nabbi, R.; Thomauske, B.; Ulrich, J. [RWTH Aachen Univ. (Germany). Inst. of Nuclear Engineering and Technology

    2014-11-15

    For the decommissioning of nuclear facilities, activity and dose rate atlases (ADAs) are required to create and manage a decommissioning plan and optimize the radiation protection measures. By the example of the research reactor FRJ-2, a detailed MCNP model for Monte-Carlo neutron and radiation transport calculations based on a full scale outer core CAD-model was generated. To cope with the inadequacies of the MCNP code for the simulation of a large and complex system like FRJ-2, the FW-CADIS method was embedded in the MCNP simulation runs to optimise particle sampling and weighting. The MAVRIC sequence of the SCALE6 program package, capable of generating importance maps, was applied for this purpose. The application resulted in a significant increase in efficiency and performance of the whole simulation method and in optimised utilization of the computer resources. As a result, the distribution of the neutron flux in the entire reactor structures - as a basis for the generation of the detailed activity atlas - was produced with a low level of variance and a high level of spatial, numerical and statistical precision.

  3. REINFORCED COMPOSITE PANEL

    2003-01-01

    A composite panel having front and back faces, the panel comprising facing reinforcement, backing reinforcement and matrix material binding to the facing and backing reinforcements, the facing and backing reinforcements each independently comprising one or more reinforcing sheets, the facing rein...... by matrix material, the facing and backing reinforcements being interconnected to resist out-of-plane relative movement. The reinforced composite panel is useful as a barrier element for shielding structures, equipment and personnel from blast and/or ballistic impact damage....

  4. God attachment, mother attachment, and father attachment in early and middle adolescence.

    Sim, Tick Ngee; Yow, Amanda Shixian

    2011-06-01

    The present study examined the interplay of attachment to God, attachment to mother, and attachment to father with respect to adjustment (hope, self-esteem, depression) for 130 early and 106 middle adolescents in Singapore. Results showed that the parental attachments were generally linked (in expected directions) to adjustment. God attachment, however, had unique results. At the bivariate level, God attachment was only linked to early adolescents' self-esteem. When considered together with parental attachments (including interactions), God attachment did not emerge as the key moderator in attachment interactions and yielded some unexpected results (e.g., being positively linked to depression). These results are discussed viz-a-viz the secure base and safe haven functions that God and parental attachments may play during adolescence.

  5. Solar reflection panels

    Diver, Jr., Richard B.; Grossman, James W [Albuquerque, NM; Reshetnik, Michael [Boulder, CO

    2006-07-18

    A solar collector comprising a glass mirror, and a composite panel, wherein the back of the mirror is affixed to a front surface of the composite panel. The composite panel comprises a front sheet affixed to a surface of a core material, preferably a core material comprising a honeycomb structure, and a back sheet affixed to an opposite surface of the core material. The invention may further comprise a sealing strip, preferably comprising EPDM, positioned between the glass mirror and the front surface of the composite panel. The invention also is of methods of making such solar collectors.

  6. Stressed skin panels

    Anon

    2001-07-01

    Advantages and disadvantages of stressed skin panels, also known as structural insulated panels (SIPs), are discussed as material and labour-saving alternatives to traditional stick framing. Stressed skin panels are manufactured 'sandwich' assemblies with a rigid insulating polystyrene foam core, whose interior and exterior surfaces are bonded into panels. The skins distribute and carry the structural loading while the bonded foam core provides insulation and keeps the two skins aligned. Since there are fewer framing members, there is little thermal bridging and the R-value remains high. SIPs are usually manufactured in four feet by eight feet panels, although some manufacturers can produce panels up to eight feet by forty feet. SIPs are resource efficient as they use less wood than conventional framing (about 25 per cent less); can structurally cover large spans, requiring less supplementary framing. Use of SIPs eliminate the need for headers over small openings; provide the ability to nail anywhere; create less scrap and waste; lessen vulnerability to unfavourable weather and other job-site hazards, can reduce delays, and often can produce significant savings in material and labour costs. Limitations include the more complex approaches to plumbing and electrical systems, although this can be minimized by designers by incorporating much of the plumbing and electrical work on interior (non-panel) walls. Most stressed skin panels require one-half inch interior gypsum drywall. If become wet, stressed skin panels take a long time to dry out and may harbour mold growth. Larger stressed-skin panels used in floors and roofs, may require cranes or other machinery for handling because of their weight. Although not without some environmental impact, overall, stressed skin panels are judged to be a resource-efficient building technology with significant energy-efficiency benefits and distinct advantages over stick framing. 3 photos.

  7. Solar panel foundation device

    Hawley, W.W.

    1983-03-29

    A transportable solar panel foundation device which has a bottom member, at least one upstanding side member, and an essentially open top. The side members are angled to permit nesting of a plurality of the foundation devices, and reinforcement pads are carried by the foundation device to support legs for one or more solar panels.

  8. Panel 5: Microbiology and Immunology Panel

    Murphy, Timothy F.; Chonmaitree, Tasnee; Barenkamp, Stephen; Kyd, Jennelle; Nokso-Koivisto, Johanna; Patel, Janak A.; Heikkinen, Terho; Yamanaka, Noboru; Ogra, Pearay; Swords, W. Edward; Sih, Tania; Pettigrew, Melinda M.

    2014-01-01

    Objective The objective is to perform a comprehensive review of the literature from January 2007 through June 2011 on the virology, bacteriology, and immunology related to otitis media. Data Sources PubMed database of the National Library of Medicine. Review Methods Three subpanels with co-chairs comprising experts in the virology, bacteriology, and immunology of otitis media were formed. Each of the panels reviewed the literature in their respective fields and wrote draft reviews. The reviews were shared with all panel members, and a second draft was created. The entire panel met at the 10th International Symposium on Recent Advances in Otitis Media in June 2011 and discussed the review and refined the content further. A final draft was created, circulated, and approved by the panel. Conclusion Excellent progress has been made in the past 4 years in advancing an understanding of the microbiology and immunology of otitis media. Advances include laboratory-based basic studies, cell-based assays, work in animal models, and clinical studies. Implications for Practice The advances of the past 4 years formed the basis of a series of short-term and long-term research goals in an effort to guide the field. Accomplishing these goals will provide opportunities for the development of novel interventions, including new ways to better treat and prevent otitis media. PMID:23536533

  9. Workspace appropriation and attachment

    M. PAVALACHE-ILIE

    2016-11-01

    Full Text Available This literature synthesis presents a short history of the evolution of the concepts of space appropriation and place attachment, highlighting the difficulty of their operationalisation from a cultural point of view. The next subject brought into discussion is the relation between the affective dimension of the connection between a person and the work place and the behaviours which are prone to insure the proper functioning of organizations, such as the organizational civism and the organizational commitment.

  10. Electron attachment analyzer

    Popp, P.; Grosse, H.J.; Leonhardt, J.; Mothes, S.; Oppermann, G.

    1984-01-01

    The invention concerns an electron attachment analyzer for detecting traces of electroaffine substances in electronegative gases, especially in air. The analyzer can be used for monitoring working places, e. g., in operating theatres. The analyzer consists of two electrodes inserted in a base frame of insulating material (quartz or ceramics) and a high-temperature resistant radiation source ( 85 Kr, 3 H, or 63 Ni)

  11. Love attitudes and attachment

    María Elena Brenlla; Analía Brizzio; Alejandra Carreras

    2016-01-01

    Love styles described by Lee are Eros (passionate love), Ludus (game-pla- ying love), Storge (friendship love), Mania (possessive, dependent love), Pragma (logical, “shopping list” love) and Agape (all-giving, selfless love). Based on those types, Hendrick and Hendrick developed a 42-ítem rating questionnaire with 7 items measuring each love style (Love Attitudes Scale). Beside, inform about frequency in love relationships and attachment style. The purpose of this study was analyze the relia...

  12. RECIPANEL: RECYCLED PAPER PANELS

    HERNÁN CAÑOLA

    2012-01-01

    Full Text Available En este artículo se estudia la fabricación y el comportamiento mecánico de paneles a base de papel reciclado. El objetivo principal del proyecto es producir un prototipo de panel que emplee elementos provenientes de residuos sólidos (papel periódico y de un material conglomerante (cemento Portland blanco. El panel debe ser económico, debe tener buenas propiedades mecánicas y debe tener dimensiones comerciales para su uso en muros tabiques y en cielos falsos en la industria de la construcción. El Recipanel es un panel no estructural a base de papel reciclado. El Recipanel cumple las normas colombianas en lo relativo a los paneles de uso no estructural y presenta además unas excelentes características mecánicas.

  13. Puncture panel optimization

    Glass, R.E.; Longenbaugh, R.S.

    1986-01-01

    Sandia National Laboratories developed the TRansUranic PACkage Transporter (TRUPACT) to transport defense contact-handled transuranic wastes. The package has been designed to meet the normal and hypothetical accident conditions in 10CFR71 which includes the demonstrated ability to survive a 1-meter drop onto a mild steel pin. The puncture protection is provided by puncture resistant panels. In conjunction with the development of TRUPACT, a series of experiments has been conducted to reduce the weight of the puncture resistant panels. The initial scoping tests resulted in a preliminary design incorporating 30 layers of Kevlar. This design has been shown to meet the regulatory puncture test. To reduce the weight of this panel, subscale tests were conducted on panels utilizing Kevlar yarns with varying mass per unit length (denier) as well as different resins. This paper reviews the testing undertaken in the original panel development and discusses the results obtained from the recent subscale and full-scale optimization tests

  14. Solar panel cleaning robot

    Nalladhimmu, Pavan Kumar Reddy; Priyadarshini, S.

    2018-04-01

    As the demand of electricity is increasing, there is need to using the renewable sources to produce the energy at present of power shortage, the use of solar energy could be beneficial to great extent and easy to get the maximum efficiency. There is an urgent in improving the efficiency of solar power generation. Current solar panels setups take a major power loss when unwanted obstructions cover the surface of the panels. To make solar energy more efficiency of solar array systems must be maximized efficiency evaluation of PV panels, that has been discussed with particular attention to the presence of dust on the efficiency of the PV panels have been highlighted. This paper gives the how the solar panel cleaning system works and designing of the cleaning system.

  15. Pleistocene fossil woods from the Okote Member, site FwJj 14 in the Ileret region, Koobi Fora Formation, northern Kenya.

    Bamford, Marion K

    2017-11-01

    On the eastern side of Lake Turkana in northern Kenya are extensive Plio-Pleistocene deposits containing a rich diversity of fossil mammals, hominins and flora within the radiometrically dated tuffaceous, lacustrine and fluvial sequence. Reconstruction of this landscape and paleoenvironment are part of an ongoing multinational and multidisciplinary human evolution project in the eastern Turkana Basin. Today there is a huge lake in the Rift Valley but it has fluctuated since the early Pliocene. Silicified wood is fairly common in some areas of the Koobi Fora Formation. One such site is FwJj 14E, alongside one of the tributaries of the Ileret River. Hominin hand and arm bones have been excavated from here in the Okote Member and dated at 1.56-1.36 Ma. The fossils are associated with hominin and bovid footprints. Sixty of the over 100 wood specimens collected have been sectioned and studied. In general the woods have large vessels and an average vulnerability index of 40, which implies a mesic megathermal environment with no water stress. Taxonomically the woods belong to large African families: Caesalpiniaceae (Didelotia idae), Combretaceae (Anogeissus sp.), Putranjivaceae (Euphorbiaceae; Drypetes sp.), Lamiaceae (cf Premna sp.), Malvaceae (Heritiera sp.) and Sapindaceae (Sapindoxylon sp.). Most of these taxa do not occur in the area today because now it is much drier and the local vegetation is predominantly Acacia-Commiphora-Salvadora shrubland. The reconstruction of the paleovegetation supports the interpretation from the fauna, namely, a tall riverine forest with shady refuge trees, possibly some edible fruits, and wooded grassland and more open bushland in the vicinity. Copyright © 2017 Elsevier Ltd. All rights reserved.

  16. An investigation of pulsed phase thermography for detection of disbonds in HIP-bonded beryllium tiles in ITER normal heat flux first wall (NHF FW) components

    Bushell, J., E-mail: joe.bushell@amec.com [AMEC Foster Wheeler, Booths Hall, Chelford Road, Knutsford, Cheshire WA16 8QZ, England (United Kingdom); Sherlock, P. [AMEC Foster Wheeler, Booths Hall, Chelford Road, Knutsford, Cheshire WA16 8QZ, England (United Kingdom); Mummery, P. [School of Mechanical, Aerospace and Civil Engineering, University of Manchester, England (United Kingdom); Bellin, B.; Zacchia, F. [Fusion for Energy, Josep Pla 2, Torres Diagonal Litoral B3, Barcelona (Spain)

    2015-10-15

    Highlights: • Pulsed phase thermography was trialled on Be-tiled plasma facing components. • Two components, one with known disbonds, one intact, were inspected and compared. • Finite element analysis was used to verify experimental observations. • PPT successfully detected disbonds in the failed component. • Good agreement found with ultrasonic test, though defect geometry was uncertain. - Abstract: Pulsed phase thermography (PPT) is a non destructive examination (NDE) technique, traditionally used in the Aerospace Industry for inspection of composite structures, which combines characteristics and benefits of flash thermography and lock-in thermography into a single, rapid inspection technique. The aim of this work was to evaluate the effectiveness of PPT as a means of inspection for the bond between the beryllium (Be) tiles and the copper alloy (CuCrZr) heatsink of the ITER NHF FW components. This is a critical area dictating the functional integrity of these components, as single tile detachment in service could result in cascade failure. PPT has advantages over existing thermography techniques using heated water which stress the component, and the non-invasive, non-contact nature presents advantages over existing ultrasonic methods. The rapid and non-contact nature of PPT also gives potential for in-service inspections as well as a quality measure for as-manufactured components. The technique has been appraised via experimental trials using ITER first wall mockups with pre-existing disbonds confirmed via ultrasonic tests, partnered with finite element simulations to verify experimental observations. This paper will present the results of the investigation.

  17. An investigation of pulsed phase thermography for detection of disbonds in HIP-bonded beryllium tiles in ITER normal heat flux first wall (NHF FW) components

    Bushell, J.; Sherlock, P.; Mummery, P.; Bellin, B.; Zacchia, F.

    2015-01-01

    Highlights: • Pulsed phase thermography was trialled on Be-tiled plasma facing components. • Two components, one with known disbonds, one intact, were inspected and compared. • Finite element analysis was used to verify experimental observations. • PPT successfully detected disbonds in the failed component. • Good agreement found with ultrasonic test, though defect geometry was uncertain. - Abstract: Pulsed phase thermography (PPT) is a non destructive examination (NDE) technique, traditionally used in the Aerospace Industry for inspection of composite structures, which combines characteristics and benefits of flash thermography and lock-in thermography into a single, rapid inspection technique. The aim of this work was to evaluate the effectiveness of PPT as a means of inspection for the bond between the beryllium (Be) tiles and the copper alloy (CuCrZr) heatsink of the ITER NHF FW components. This is a critical area dictating the functional integrity of these components, as single tile detachment in service could result in cascade failure. PPT has advantages over existing thermography techniques using heated water which stress the component, and the non-invasive, non-contact nature presents advantages over existing ultrasonic methods. The rapid and non-contact nature of PPT also gives potential for in-service inspections as well as a quality measure for as-manufactured components. The technique has been appraised via experimental trials using ITER first wall mockups with pre-existing disbonds confirmed via ultrasonic tests, partnered with finite element simulations to verify experimental observations. This paper will present the results of the investigation.

  18. Next Steps in Attachment Theory.

    Bell, David C

    2012-12-01

    Thanks to the phenomenal success of attachment theory, great progress has been made in understanding child and adult relationships. The success of attachment theory opens the way to new research directions that can extend its successes even further. In particular, more work on the fundamental nature of attachment that respects recent biological research is important, as is concentrated effort on the related caregiving system.

  19. Next Steps in Attachment Theory

    Bell, David C.

    2012-01-01

    Thanks to the phenomenal success of attachment theory, great progress has been made in understanding child and adult relationships. The success of attachment theory opens the way to new research directions that can extend its successes even further. In particular, more work on the fundamental nature of attachment that respects recent biological research is important, as is concentrated effort on the related caregiving system.

  20. Introduction: attachment theory and psychotherapy.

    Levy, Kenneth N

    2013-11-01

    In this introduction to the JCLP: In Session 69(11) issue on attachment theory and psychotherapy, the key points of attachment theory (Bowlby, , , 1981) and its relevance to psychotherapy are briefly described. The aim of this issue is to provide case illustrations of how an attachment theory perspective and principles can expand our understanding of psychotherapy practice. © 2013 Wiley Periodicals, Inc.

  1. Make Your Own Solar Panel.

    Suzuki, David

    1992-01-01

    Presents an activity in which students make a simulated solar panel to learn about the principles behind energy production using solar panels. Provides information about how solar panels function to produce energy. (MCO)

  2. Impact of Maternal Attachment Style on Mother to Infant Attachment

    V Moghaddam Hoseini

    2012-05-01

    Full Text Available

    Background and Objectives: Maternal attachment has the potential to affect both child development and parenting. As such, mother-infant attachment has been considered an important topic in recent years. The aim of this study was to determine the relationship between maternal adult attachment style, the maternal obstetric and demographic characteristics and mother-infant attachment.

     

    Methods: In this descriptive-correlational study, 102 women who had referred to health centers in Mashhad in 2008 and who had inclusion criteriawere selected using stratified cluster sampling. After interview about obstetric and demographic characteristics, they were asked to complete the "Revised Adult Attachment Scale" and "Mother to Infant Attachment Inventory" for assessment of maternal attachment style and mother-infant attachment 4-5 weeks after delivery. Data were analyzed by Pearson Correlation, Kruskal-wallis and Mann-whitney statistical tests.

     

    Results: In this study, themean of mother-infant attachment was found to be 97.48±6.12 and the mean of secure adult attachment was higher than that of other styles (16.89±3.97. Although, there were negative significant relationship between maternal avoidant style and mother-infant attachment (p=0.037,r=-0/20, there were no relationship between maternal age and education, parity, type of delivery and mother-infant attachment.

     

    Conclusion: The results of this research show that maternal attachment style is one of the factors of mother -infant attachment.

  3. Porcine dentin sialoprotein glycosylation and glycosaminoglycan attachments.

    Yamakoshi, Yasuo; Nagano, Takatoshi; Hu, Jan Cc; Yamakoshi, Fumiko; Simmer, James P

    2011-02-03

    Dentin sialophosphoprotein (Dspp) is a multidomain, secreted protein that is critical for the formation of tooth dentin. Mutations in DSPP cause inherited dentin defects categorized as dentin dysplasia type II and dentinogenesis imperfecta type II and type III. Dentin sialoprotein (Dsp), the N-terminal domain of dentin sialophosphoprotein (Dspp), is a highly glycosylated proteoglycan, but little is known about the number, character, and attachment sites of its carbohydrate moieties. To identify its carbohydrate attachment sites we isolated Dsp from developing porcine molars and digested it with endoproteinase Glu-C or pronase, fractionated the digestion products, identified fractions containing glycosylated peptides using a phenol sulfuric acid assay, and characterized the glycopeptides by N-terminal sequencing, amino acid analyses, or LC/MSMS. To determine the average number of sialic acid attachments per N-glycosylation, we digested Dsp with glycopeptidase A, labeled the released N-glycosylations with 2-aminobenzoic acid, and quantified the moles of released glycosylations by comparison to labeled standards of known concentration. Sialic acid was released by sialidase digestion and quantified by measuring β-NADH reduction of pyruvic acid, which was generated stoichiometrically from sialic acid by aldolase. To determine its forms, sialic acid released by sialidase digestion was labeled with 1,2-diamino-4,5-methyleneoxybenzene (DMB) and compared to a DMB-labeled sialic acid reference panel by RP-HPLC. To determine the composition of Dsp glycosaminoglycan (GAG) attachments, we digested Dsp with chondroitinase ABC and compared the chromotagraphic profiles of the released disaccharides to commercial standards. N-glycosylations were identified at Asn37, Asn77, Asn136, Asn155, Asn161, and Asn176. Dsp averages one sialic acid per N-glycosylation, which is always in the form of N-acetylneuraminic acid. O-glycosylations were tentatively assigned at Thr200, Thr216 and Thr

  4. Porcine dentin sialoprotein glycosylation and glycosaminoglycan attachments

    Yamakoshi Fumiko

    2011-02-01

    Full Text Available Abstract Background Dentin sialophosphoprotein (Dspp is a multidomain, secreted protein that is critical for the formation of tooth dentin. Mutations in DSPP cause inherited dentin defects categorized as dentin dysplasia type II and dentinogenesis imperfecta type II and type III. Dentin sialoprotein (Dsp, the N-terminal domain of dentin sialophosphoprotein (Dspp, is a highly glycosylated proteoglycan, but little is known about the number, character, and attachment sites of its carbohydrate moieties. Results To identify its carbohydrate attachment sites we isolated Dsp from developing porcine molars and digested it with endoproteinase Glu-C or pronase, fractionated the digestion products, identified fractions containing glycosylated peptides using a phenol sulfuric acid assay, and characterized the glycopeptides by N-terminal sequencing, amino acid analyses, or LC/MSMS. To determine the average number of sialic acid attachments per N-glycosylation, we digested Dsp with glycopeptidase A, labeled the released N-glycosylations with 2-aminobenzoic acid, and quantified the moles of released glycosylations by comparison to labeled standards of known concentration. Sialic acid was released by sialidase digestion and quantified by measuring β-NADH reduction of pyruvic acid, which was generated stoichiometrically from sialic acid by aldolase. To determine its forms, sialic acid released by sialidase digestion was labeled with 1,2-diamino-4,5-methyleneoxybenzene (DMB and compared to a DMB-labeled sialic acid reference panel by RP-HPLC. To determine the composition of Dsp glycosaminoglycan (GAG attachments, we digested Dsp with chondroitinase ABC and compared the chromotagraphic profiles of the released disaccharides to commercial standards. N-glycosylations were identified at Asn37, Asn77, Asn136, Asn155, Asn161, and Asn176. Dsp averages one sialic acid per N-glycosylation, which is always in the form of N-acetylneuraminic acid. O-glycosylations were

  5. Attachment is a dynamic system

    Zlatka Cugmas

    2003-04-01

    Full Text Available On the basis of the study of recent scientific literature about the development of attachment, the author answers the following questions: which are the postulates the theory of attachment has about the stability of the patterns of attachment, which level of stability in the patterns of attachment from infancy to adulthood these studies illuminate and which factors significantly influence the (instability of the patterns of attachment in time. The theory of attachment assumes that normal circumstances elicit stability. Changes, however, can be the result of important events influencing the sensitivity of the object of attachment. Agreement has not yet been reached regarding the percentage of stability in the patterns of attachment. There is more agreement regarding attachment in adulthood than that in childhood. The results depend on the size and characteristics of the subjects of the research, the measuring instruments, type of data analysis etc. The author concludes that attachment is a dynamic system influenced by significant changes in life (the cognitive development of the child, external care, parents' divorce, different stressful situations. As the influence of stressful events on the individual person' s quality of attachment is examined, it is necessary to consider also his/her temperamental characteristics, role of other people in their lives, etc.

  6. Gonococcal attachment to eukaryotic cells

    James, J.F.; Lammel, C.J.; Draper, D.L.; Brown, D.A.; Sweet, R.L.; Brooks, G.F.

    1983-01-01

    The attachment of Neisseria gonorrhoeae to eukaryotic cells grown in tissue culture was analyzed by use of light and electron microscopy and by labeling of the bacteria with [ 3 H]- and [ 14 C]adenine. Isogenic piliated and nonpiliated N. gonorrhoeae from opaque and transparent colonies were studied. The results of light microscopy studies showed that the gonococci attached to cells of human origin, including Flow 2000, HeLa 229, and HEp 2. Studies using radiolabeled gonococci gave comparable results. Piliated N. gonorrhoeae usually attached in larger numbers than nonpiliated organisms, and those from opaque colonies attached more often than isogenic variants from transparent colonies. Day-to-day variation in rate of attachment was observed. Scanning electron microscopy studies showed the gonococcal attachment to be specific for microvilli of the host cells. It is concluded that more N. gonorrhoeae from opaque colonies, as compared with isogenic variants from transparent colonies, attach to eukaryotic cells grown in tissue culture

  7. Blue Ribbon Panel Report

    An NCI Cancer Currents blog by the NCI acting director thanking the cancer community for contributing to the Cancer Moonshot Blue Ribbon Panel report, which was presented to the National Cancer Advisory Board on September 7.

  8. Panel acoustic contribution analysis.

    Wu, Sean F; Natarajan, Logesh Kumar

    2013-02-01

    Formulations are derived to analyze the relative panel acoustic contributions of a vibrating structure. The essence of this analysis is to correlate the acoustic power flow from each panel to the radiated acoustic pressure at any field point. The acoustic power is obtained by integrating the normal component of the surface acoustic intensity, which is the product of the surface acoustic pressure and normal surface velocity reconstructed by using the Helmholtz equation least squares based nearfield acoustical holography, over each panel. The significance of this methodology is that it enables one to analyze and rank relative acoustic contributions of individual panels of a complex vibrating structure to acoustic radiation anywhere in the field based on a single set of the acoustic pressures measured in the near field. Moreover, this approach is valid for both interior and exterior regions. Examples of using this method to analyze and rank the relative acoustic contributions of a scaled vehicle cabin are demonstrated.

  9. Autoimmune liver disease panel

    Liver disease test panel - autoimmune ... Autoimmune disorders are a possible cause of liver disease. The most common of these diseases are autoimmune hepatitis and primary biliary cholangitis (formerly called primary biliary cirrhosis). This group of tests ...

  10. AQUEOUS HOMOGENEOUS REACTORTECHNICAL PANEL REPORT

    Diamond, D.J.; Bajorek, S.; Bakel, A.; Flanagan, G.; Mubayi, V.; Skarda, R.; Staudenmeier, J.; Taiwo, T.; Tonoike, K.; Tripp, C.; Wei, T.; Yarsky, P.

    2010-12-03

    Considerable interest has been expressed for developing a stable U.S. production capacity for medical isotopes and particularly for molybdenum- 99 (99Mo). This is motivated by recent re-ductions in production and supply worldwide. Consistent with U.S. nonproliferation objectives, any new production capability should not use highly enriched uranium fuel or targets. Conse-quently, Aqueous Homogeneous Reactors (AHRs) are under consideration for potential 99Mo production using low-enriched uranium. Although the Nuclear Regulatory Commission (NRC) has guidance to facilitate the licensing process for non-power reactors, that guidance is focused on reactors with fixed, solid fuel and hence, not applicable to an AHR. A panel was convened to study the technical issues associated with normal operation and potential transients and accidents of an AHR that might be designed for isotope production. The panel has produced the requisite AHR licensing guidance for three chapters that exist now for non-power reactor licensing: Reac-tor Description, Reactor Coolant Systems, and Accident Analysis. The guidance is in two parts for each chapter: 1) standard format and content a licensee would use and 2) the standard review plan the NRC staff would use. This guidance takes into account the unique features of an AHR such as the fuel being in solution; the fission product barriers being the vessel and attached systems; the production and release of radiolytic and fission product gases and their impact on operations and their control by a gas management system; and the movement of fuel into and out of the reactor vessel.

  11. Attachment Theory in Tourism

    Maximiliano Korstanje

    2007-01-01

    Full Text Available The following work is intended to a revision on attachment theory. The postulates of the theory of the sure base point that the system of exploration meets in narrow relation the system of conducts of attachment and the figure of the keepers. The conducts that characterize and symbolize the relation of the adult with the environment are carried back to the early age, in the moment in which the child develops the affective capacity. What difference does exist between someone who decides to journey to England and that one that one decides to travel to Mar del Plata? How it is possible to study this topic of on a manner trustworthy? These three questions were key to begin the investigation. Nevertheless, the matter began to find certain limitations linked to the methodology that had to be in use. It is possible to use careless they on the leisure scope, a theory which still demonstrates certain inconsistencies in its own clinical application?

  12. Ceramic blade attachment system

    Frey, G.A.; Jimenez, O.D.

    1996-12-03

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine flange having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine flange includes a first upstanding flange and a second upstanding flange having a groove formed between them. The turbine flange further includes a recess. Each of the first and second upstanding flanges have a plurality of bores therein. A turbine blade has a first member and a second member positioned in one of the groove and the recess. Each of the first member and the second member have a plurality of bores therein. A pin is positioned in respective ones of the plurality of bores in the first and second upstanding members and the first and second members and attach the blade to the turbine flange. The pin has a preestablished rate of thermal expansion being substantially equal to the rate of thermal expansion of the blade. 4 figs.

  13. Hexagon solar power panel

    Rubin, I. (Inventor)

    1978-01-01

    A solar energy panel support is described upon which silicon cells are arrayed. The cells are wafer thin and of two geometrical types, both of the same area and electrical rating, namely hexagon cells and hourglass cells. The hourglass cells are composites of half hexagons. A near perfect nesting relationship of the cells achieves a high density packing whereby optimum energy production per panel area is achieved.

  14. Propulsion Systems Panel deliberations

    Bianca, Carmelo J.; Miner, Robert; Johnston, Lawrence M.; Bruce, R.; Dennies, Daniel P.; Dickenson, W.; Dreshfield, Robert; Karakulko, Walt; Mcgaw, Mike; Munafo, Paul M.

    1993-01-01

    The Propulsion Systems Panel was established because of the specialized nature of many of the materials and structures technology issues related to propulsion systems. This panel was co-chaired by Carmelo Bianca, MSFC, and Bob Miner, LeRC. Because of the diverse range of missions anticipated for the Space Transportation program, three distinct propulsion system types were identified in the workshop planning process: liquid propulsion systems, solid propulsion systems and nuclear electric/nuclear thermal propulsion systems.

  15. Honeycomb metal panel

    1979-01-01

    Product constituted by a honeycomb metal panel that can be employed to advantage for manufacturing lagging by sandwiching it between two plane sheets, utilized in particular in the nuclear industry where lagging has to have a very long life strength. The honeycomb metal panel is made of an expanded metal extrusion previously cut so as to form, after additional drawing, a honeycomb structure with square or rectangular cells with a plane surface [fr

  16. Electron attachment cross sections obtained from electron attachment spectroscopy

    Popp, P.; Baumbach, J.I.; Leonhardt, J.W.; Mothes, S.

    1988-01-01

    Electron capture detectors have a high sensitivity for substances with high thermal electron attachment cross sections. The electron attachment spectroscopy makes it possible to change the mean electron energy in such a way that the maximum for dissociative electron attachment is reached. Thus, best operation modes of the detection system as well as significant dependencies of electron attachment coefficients are available. Cross sections for electron attachment as a function of the electron energy are obtained with the knowledge of electron energy distribution functions from Boltzmann equation analysis by a special computer code. A disadvantage of this electron attachment spectroscopy is the superposition of space charge effects due to the decrease of the electron drift velocity with increasing mean electron energy. These influences are discussed. (author)

  17. Reflecting variable opening insulating panel

    Nungesser, W.T.

    1976-01-01

    A description is given of a reflecting variable opening insulating panel assembly, comprising a static panel assembly of reflecting insulation sheets forming a cavity along one side of the panel and a movable panel opening out by sliding from the cavity of the static panel, and a locking device for holding the movable panel in a position extending from the cavity of the static panel. This can apply to a nuclear reactor of which the base might require maintenance and periodical checking and for which it is desirable to have available certain processes for the partial dismantling of the insulation [fr

  18. Sentence-Level Attachment Prediction

    Albakour, M.-Dyaa; Kruschwitz, Udo; Lucas, Simon

    Attachment prediction is the task of automatically identifying email messages that should contain an attachment. This can be useful to tackle the problem of sending out emails but forgetting to include the relevant attachment (something that happens all too often). A common Information Retrieval (IR) approach in analyzing documents such as emails is to treat the entire document as a bag of words. Here we propose a finer-grained analysis to address the problem. We aim at identifying individual sentences within an email that refer to an attachment. If we detect any such sentence, we predict that the email should have an attachment. Using part of the Enron corpus for evaluation we find that our finer-grained approach outperforms previously reported document-level attachment prediction in similar evaluation settings.

  19. Interferences in place attachment: implications for wilderness

    Erin K. Sharpe; Alan W. Ewert

    2000-01-01

    Previous research on place attachment has tended to focus on attachment formation, with relatively little attention given to factors that disrupt or interfere with formed place attachments. Interferences to attachments are a worthy research area for two reasons: 1) The factors of place attachment are often more salient when being disrupted, and 2) place attachment...

  20. Rational Design of Composite Panels

    Riber, Hans Jørgen

    1996-01-01

    A non-linear structural model for composite panels is presented. The non-linear terms in the lateral displacements are modelled as an additional set of lateral loads acting on the panel. Hence the solution is reduced to that of an equivalent panel with small displacements In order to treat sandwich...... Norske Veritas', DNV, building rules concerning high-speed light craft, in which the panel scantlings are often restricted by a maximum lateral deflection connected with the panel span....

  1. Using attachment theory in mentoring.

    Miles, Kerri

    Attachment theory is a useful way to understand the bond between children and the people with whom they have emotional ties--usually caregivers. The theory can also help us to understand any adult relationship that provides closeness and a sense of attachment, especially in times of stress or need. Understanding the nature, cause and effect of the role and function of attachment from a training and development perspective, and different styles of attachment, may improve the quality of the mentoring experience for both mentors and mentees.

  2. Systemic therapy and attachment narratives: Attachment Narrative Therapy.

    Dallos, Rudi; Vetere, Arlene

    2014-10-01

    This article outlines an integration of attachment theory with narrative theory and systemic theory and practice: Attachment Narrative Therapy (ANT). This integration offers a more powerful explanatory formulation of the development and maintenance of human distress in relationships, families and communities, and gives direction to psychotherapeutic intervention. © The Author(s) 2014.

  3. From security to attachment : Mary Ainsworth's contribution to attachment theory

    Rosmalen, Lenette (Lenny) van

    2015-01-01

    Even though John Bowlby (1907-1990) is generally regarded as the founder of attachment theory, Mary Ainsworth’s (1913-1999) contribution is considerable and goes beyond the design of the Strange Situation Procedure and the introduction of maternal sensitivity as decisive for a secure attachment

  4. Panels of microporous insulation

    McWilliams, J.A.; Morgan, D.E.; Jackson, J.D.J.

    1990-08-07

    Microporous thermal insulation materials have a lattice structure in which the average interstitial dimension is less than the mean free path of the molecules of air or other gas in which the material is arranged. This results in a heat flow which is less than that attributable to the molecular heat diffusion of the gas. According to this invention, a method is provided for manufacturing panels of microporous thermal insulation, in particular such panels in which the insulation material is bonded to a substrate. The method comprises the steps of applying a film of polyvinyl acetate emulsion to a non-porous substrate, and compacting powdery microporous thermal insulation material against the film so as to cause the consolidated insulation material to bond to the substrate and form a panel. The polyvinyl acetate may be applied by brushing or spraying, and is preferably allowed to dry prior to compacting the insulation material. 1 fig.

  5. Advanced solar panel designs

    Ralph, E. L.; Linder, E.

    1995-01-01

    This paper describes solar cell panel designs that utilize new hgih efficiency solar cells along with lightweight rigid panel technology. The resulting designs push the W/kg and W/sq m parameters to new high levels. These new designs are well suited to meet the demand for higher performance small satellites. This paper reports on progress made on two SBIR Phase 1 contracts. One panel design involved the use of large area (5.5 cm x 6.5 cm) GaAs/Ge solar cells of 19% efficiency combined with a lightweight rigid graphite fiber epoxy isogrid substrate configuration. A coupon (38 cm x 38 cm) was fabricated and tested which demonstrated an array specific power level of 60 W/kg with a potential of reaching 80 W/kg. The second panel design involved the use of newly developed high efficiency (22%) dual junction GaInP2/GaAs/Ge solar cells combined with an advanced lightweight rigid substrate using aluminum honeycomb core with high strength graphite fiber mesh facesheets. A coupon (38 cm x 38 cm) was fabricated and tested which demonstrated an array specific power of 105 W/kg and 230 W/sq m. This paper will address the construction details of the panels and an a analysis of the component weights. A strawman array design suitable for a typical small-sat mission is described for each of the two panel design technologies being studied. Benefits in respect to weight reduction, area reduction, and system cost reduction are analyzed and compared to conventional arrays.

  6. Panel 3 - characterization

    Erck, R.A.; Erdemir, A.; Janghsing Hsieh; Lee, R.H.; Xian Zheng Pan; Deming Shu [Argonne National Lab., IL (United States); Feldman, A. [National Inst. of Standards and Technology, Gaithersburg, MD (United States); Glass, J.T. [North Carolina State Univ., Raleigh (United States); Kleimer, R. [Coors Ceramics Co., Golden, CO (United States); Lawton, E.A. [JPL/Caltech, Pasadena, CA (United States); McHargue, C.J. [Univ. of Tennessee, Knoxville (United States)

    1993-01-01

    The task of this panel was to identify and prioritize needs in the area of characterization of diamond and diamond-like-carbon (DLC) films for use in the transportation industry. Until recent advances in production of inexpensive films of diamonds and DLC, it was not feasible that these materials could be mass produced. The Characterization Panel is restricting itself to identifying needs in areas that would be most useful to manufacturers and users in producing and utilizing diamond and DLC coatings in industry. These characterization needs include in-situ monitoring during growth, relation of structure to performance, and standards and definitions.

  7. Analysis of Panel Data

    Hsiao, Cheng

    2003-02-01

    Panel data models have become increasingly popular among applied researchers due to their heightened capacity for capturing the complexity of human behavior, as compared to cross-sectional or time series data models. This second edition represents a substantial revision of the highly successful first edition (1986). Recent advances in panel data research are presented in an accessible manner and are carefully integrated with the older material. The thorough discussion of theory and the judicious use of empirical examples make this book useful to graduate students and advanced researchers in economics, business, sociology and political science.

  8. Protein Attachment on Nanodiamonds.

    Lin, Chung-Lun; Lin, Cheng-Huang; Chang, Huan-Cheng; Su, Meng-Chih

    2015-07-16

    A recent advance in nanotechnology is the scale-up production of small and nonaggregated diamond nanoparticles suitable for biological applications. Using detonation nanodiamonds (NDs) with an average diameter of ∼4 nm as the adsorbents, we have studied the static attachment of three proteins (myoglobin, bovine serum albumin, and insulin) onto the nanoparticles by optical spectroscopy, mass spectrometry, and dynamic light scattering, and electrophoretic zeta potential measurements. Results show that the protein surface coverage is predominantly determined by the competition between protein-protein and protein-ND interactions, giving each protein a unique and characteristic structural configuration in its own complex. Specifically, both myoglobin and bovine serum albumin show a Langmuir-type adsorption behavior, forming 1:1 complexes at saturation, whereas insulin folds into a tightly bound multimer before adsorption. The markedly different adsorption patterns appear to be independent of the protein concentration and are closely related to the affinity of the individual proteins for the NDs. The present study provides a fundamental understanding for the use of NDs as a platform for nanomedical drug delivery.

  9. Attachment, caring and prosocial behavior

    Erez, Ayelet

    2007-01-01

    The thesis focuses on 5 studies examining the role of adult attachment in volunteering by defining volunteerism as a form of caregiving. By that we suggest an effect of one behavioral system, attachment, on another, caring or prosocial behaviors in individual or group settings. Studies 1 and 2

  10. Attachment and Dyadic Regulation Processes.

    Overall, Nickola C; Simpson, Jeffry A

    2015-02-01

    Insecurely attached people have relatively unhappy and unstable romantic relationships, but the quality of their relationships depends on how their partners regulate them. Some partners find ways to regulate the emotional and behavioral reactions of insecurely attached individuals, which promotes greater relationship satisfaction and security. We discuss attachment theory and interdependence dilemmas, and then explain how and why certain responses by partners assuage the cardinal concerns of insecure individuals in key interdependent situations. We then review recent studies illustrating how partners can successfully regulate the reactions of anxiously and avoidantly attached individuals, yielding more constructive interactions. We finish by considering how these regulation processes can create a more secure dyadic environment, which helps to improve relationships and attachment security across time.

  11. Advanced Solar Panel Designs

    Ralph, E. L.; Linder, E. B.

    1995-01-01

    Solar panel designs that utilize new high-efficiency solar cells and lightweight rigid panel technologies are described. The resulting designs increase the specific power (W/kg) achievable in the near-term and are well suited to meet the demands of higher performance small satellites (smallsats). Advanced solar panel designs have been developed and demonstrated on two NASA SBIR contracts at Applied Solar. The first used 19% efficient, large area (5.5 cm x 6.5 cm) GaAs/Ge solar cells with a lightweight rigid graphite epoxy isogrid substrate configuration. A 1,445 sq cm coupon was fabricated and tested to demonstrate 60 W/kg with a high potential of achieving 80 W/kg. The second panel design used new 22% efficiency, dual-junction GaInP2/GaAs/Ge solar cells combined with a lightweight aluminum core/graphite fiber mesh facesheet substrate. A 1,445 sq cm coupon was fabricated and tested to demonstrate 105 W/kg with the potential of achieving 115 W/kg.

  12. INTERNATIONAL COLLABORATION: Panelling

    Anon.

    1991-01-01

    At the meeting of the International Committee for Future Accelerators (ICFA), in Geneva in July, Chairman A.N. Skrinsky of Novosibirsk reviewed ICFA progress, particularly the activities of the specialist Panels which pursue specific Committee objectives in guiding worldwide collaboration in high energy physics

  13. INTERNATIONAL COLLABORATION: Panelling

    Anon.

    1991-10-15

    At the meeting of the International Committee for Future Accelerators (ICFA), in Geneva in July, Chairman A.N. Skrinsky of Novosibirsk reviewed ICFA progress, particularly the activities of the specialist Panels which pursue specific Committee objectives in guiding worldwide collaboration in high energy physics.

  14. Law Panel in action.

    Odulana, J

    In September 1976 the Africa Regional Council (ARC) of IPPF created a Law Panel to 1) advise the ARC on the emphasis of laws and parenthood programs in the region, 2) investigate legal obstacles to family planning and ways of removing them, 3) institute a monitoring service on laws and court decisions affecting planned parenthood, and 4) prepare a list of lawyers and legal reformers by country. The panel has 1) recommended adoption of an IPPF Central Medical Committee and Central Law Panel statement on sterilization, adolescent fertility control, and the use of medical and auxiliary personnel in family planning services with guidelines for Africa; 2) appointed National Legal Correspondents to carry on the monitoring service mentioned above in 18 countries; and 3) discussed solutions to problems in delivering family planning services with family planning associations in Tanzania, Zambia, Mauritius, Madagascar, and Kenya. Laws governing family planning education and services, marriage, divorce, and maternity benefits in these countries are summarized. In 1978 the panel will hold 2 workshops on law and the status of women.

  15. Paneling architectural freeform surfaces

    Eigensatz, Michael; Kilian, Martin; Schiftner, Alexander; Mitra, Niloy J.; Pottmann, Helmut; Pauly, Mark

    2010-01-01

    The emergence of large-scale freeform shapes in architecture poses big challenges to the fabrication of such structures. A key problem is the approximation of the design surface by a union of patches, socalled panels, that can be manufactured with a

  16. Photovoltaic-Panel Laminator

    Keenan, R.

    1985-01-01

    Two-piece unit heats and presses protective layers to form laminate. Rubber diaphragm between upper and lower vacuum chambers alternates between neutral position and one that presses against solar-cell array, supplying distributed force necessary to press layers of laminate together. Encapsulation helps to protect cells from environment and to ensure long panel life while allowing efficient generation of electricity from Sunlight.

  17. Dynamic panel data models

    Bun, M.J.G.; Sarafidis, V.

    2013-01-01

    This Chapter reviews the recent literature on dynamic panel data models with a short time span and a large cross-section. Throughout the discussion we considerlinear models with additional endogenous covariates. First we give a broad overview of available inference methods placing emphasis on GMM.

  18. Composite panel development at JPL

    Mcelroy, Paul; Helms, Rich

    1988-01-01

    Parametric computer studies can be use in a cost effective manner to determine optimized composite mirror panel designs. An InterDisciplinary computer Model (IDM) was created to aid in the development of high precision reflector panels for LDR. The materials properties, thermal responses, structural geometries, and radio/optical precision are synergistically analyzed for specific panel designs. Promising panels designs are fabricated and tested so that comparison with panel test results can be used to verify performance prediction models and accommodate design refinement. The iterative approach of computer design and model refinement with performance testing and materials optimization has shown good results for LDR panels.

  19. Adult Attachment Style and Suicidality.

    Miniati, Mario; Callari, Antonio; Pini, Stefano

    2017-09-01

    There is evidence in the literature that adverse early attachment experiences and subsequent attachment insecurities during adulthood would lead to pessimism, low self-esteem, hopelessness and, ultimately, to suicide risk. This paper aims to review finding on the link between attachment style and suicidality. We searched the literature using the database of the U.S. National Center for Biotechnology Information (NCBI)-MedLine/Pubmed system from January 1992 until December 2016. We started with 1992 because, as far as we know, there are no published studies exploring the relationship between suicide and insecure attachment before that year. We considered reports published on the relationship between attachment style and suicidality. We applied several combinations of the following search terms: attachment, adult attachment style and suicidality, suicide, suicidal ideation, suicidal behavior or suicidal thoughts, and suicide attempts. We selected only English language studies. Research suggests that insecure attachment style, mostly anxious, and unresolved traumas are associated with an increased suicide risk. Few studies prospectively examined clinical course, comorbid psychiatric disorders, familial suicidality or other psychosocial factors. Further research is needed to highlight the nature of the link between attachment and suicidality. The presence of suicidal ideation and attempts might be a consequence of an underlying interaction between the emergence of psychiatrics symptoms, and the long-lasting presence of inadequate patterns of attachment. Within this context, Separation Anxiety Disorder, categorized in the DSM-5 as a condition not confined to childhood but as an anxiety disorder that may occur through the entire lifespan, might be the a key for the comprehension of this link. From a neurobiological point of view, the role of oxytocin remains unclear.

  20. Aerospace Safety Advisory Panel

    1999-01-01

    This report covers the activities of the Aerospace Safety Advisory Panel (ASAP) for calendar year 1998-a year of sharp contrasts and significant successes at NASA. The year opened with the announcement of large workforce cutbacks. The slip in the schedule for launching the International Space Station (ISS) created a five-month hiatus in Space Shuttle launches. This slack period ended with the successful and highly publicized launch of the STS-95 mission. As the year closed, ISS assembly began with the successful orbiting and joining of the Functional Cargo Block (FGB), Zarya, from Russia and the Unity Node from the United States. Throughout the year, the Panel maintained its scrutiny of NASA's safety processes. Of particular interest were the potential effects on safety of workforce reductions and the continued transition of functions to the Space Flight Operations Contractor. Attention was also given to the risk management plans of the Aero-Space Technology programs, including the X-33, X-34, and X-38. Overall, the Panel concluded that safety is well served for the present. The picture is not as clear for the future. Cutbacks have limited the depth of talent available. In many cases, technical specialties are 'one deep.' The extended hiring freeze has resulted in an older workforce that will inevitably suffer significant departures from retirements in the near future. The resulting 'brain drain' could represent a future safety risk unless appropriate succession planning is started expeditiously. This and other topics are covered in the section addressing workforce. The major NASA programs are also limited in their ability to plan property for the future. This is of particular concern for the Space Shuttle and ISS because these programs are scheduled to operate well into the next century. In the case of the Space Shuttle, beneficial and mandatory safety and operational upgrades are being delayed because of a lack of sufficient present funding. Likewise, the ISS has

  1. Panel and planar experimental shear behavior of wood panels ...

    Panel shear strength along the thickness and planar shear along the length of wood panels laminated softwood oriented OSB 10 mm thick, conditioned at different moisture contents (anhydrous medium, ambient temperature and humid medium) was measured on standardized test specimens, cut in half lengthwise panel ...

  2. FEMA DFIRM Panel Scheme Polygons

    Minnesota Department of Natural Resources — This layer contains information about the Flood Insurance Rate Map (FIRM) panel areas. The spatial entities representing FIRM panels are polygons. The polygon for...

  3. Report of Industry Panel Group

    Gallimore, Simon; Gier, Jochen; Heitland, Greg; Povinelli, Louis; Sharma, Om; VandeWall, Allen

    2006-01-01

    A final report is presented from the industry panel group. The contents include: 1) General comments; 2) Positive progress since Minnowbrook IV; 3) Industry panel outcome; 4) Prioritized turbine projects; 5) Prioritized compressor projects; and 6) Miscellaneous.

  4. Universal precision sine bar attachment

    Mann, Franklin D. (Inventor)

    1989-01-01

    This invention relates to an attachment for a sine bar which can be used to perform measurements during lathe operations or other types of machining operations. The attachment can be used for setting precision angles on vises, dividing heads, rotary tables and angle plates. It can also be used in the inspection of machined parts, when close tolerances are required, and in the layout of precision hardware. The novelty of the invention is believed to reside in a specific versatile sine bar attachment for measuring a variety of angles on a number of different types of equipment.

  5. Everything You Want To Know about Attachment.

    Honig, Alice Sterling

    This paper discusses infant attachment, which it defines as a long-lasting emotional bond revealed when a child under stress seeks out and tries to stay close to a specific figure. The paper addresses: (1) What is attachment? Who are the pioneers in attachment theory?; (2) How do we notice attachment in action?; (3) Is attachment the only…

  6. Solar Array Panels With Dust-Removal Capability

    Dawson, Stephen; Mardesich, Nick; Spence, Brian; White, Steve

    2004-01-01

    It has been proposed to incorporate piezoelectric vibrational actuators into the structural supports of solar photovoltaic panels, for the purpose of occasionally inducing vibrations in the panels in order to loosen accumulated dust. Provided that the panels were tilted, the loosened dust would slide off under its own weight. Originally aimed at preventing obscuration of photovoltaic cells by dust accumulating in the Martian environment, the proposal may also offer an option for the design of solar photovoltaic panels for unattended operation at remote locations on Earth. The figure depicts a typical lightweight solar photovoltaic panel comprising a backside grid of structural spars that support a thin face sheet that, in turn, supports an array of photovoltaic cells on the front side. The backside structure includes node points where several spars intersect. According to the proposal, piezoelectric buzzers would be attached to the node points. The process of designing the panel would be an iterative one that would include computational simulation of the vibrations by use of finite- element analysis to guide the selection of the vibrational frequency of the actuators and the cross sections of the spars to maximize the agitation of dust.

  7. Experience with citizens panels

    Selwyn, J.

    2002-01-01

    In May 1999, 200 delegates attended a four-day UK Consensus Conference on radioactive waste management, which was organised by the UK Centre for Economic and Environmental Development (UK CEED) and supported by the government, industry and environmental groups. The event brought together a Citizens' Panel of fifteen people, randomly selected to represent a cross section of the British public, together with the major players in the debate. The four-day conference saw the panel cross-examine expert witnesses from organisations such as NIREX, British Nuclear Fuels Limited, the Ministry of Defence, Greenpeace and Friends of the Earth. The findings of their investigations were put together in a report containing detailed recommendations for government and industry and presented to the Minister on the final day. (author)

  8. Adult attachment style and anxiety

    Nielsen, Sara Kerstine Kaya; Lønfeldt, Nicole Nadine; Wolitzky-Taylor, Kate

    2017-01-01

    Although there is substantial evidence for the role of emotion regulation in the etiology and maintenance of anxiety disorders, knowledge about what contributes to emotion dysregulation is sparse. Attachment style is related to emotion regulation and anxiety symptoms, but these variables have rar...... knowledge to examine the mediating role of emotion regulation between attachment dimensions (avoidance and anxiety) and anxiety symptoms.......Although there is substantial evidence for the role of emotion regulation in the etiology and maintenance of anxiety disorders, knowledge about what contributes to emotion dysregulation is sparse. Attachment style is related to emotion regulation and anxiety symptoms, but these variables have...... rarely been examined together. Examining emotion dysregulation within the context of anxiety disorders through an attachment theory framework will lead to a better understanding of the etiology and maintenance of anxiety disorders. In the present study we combined theoretically and empirically derived...

  9. WEAVING THE FABRIC OF ATTACHMENT

    Lindsay Stewart

    2011-01-01

    This article is the Keynote Address given at the 5th International Integrative Psychotherapy Association Conference in Vichy, France, April 21, 2011. In the article author describes development of secure attachment with the help of the case study.

  10. Attachment Narratives in Refugee Children

    De Haene, L.; Dalgård, Nina Thorup; Montgomery, E.

    2013-01-01

    J Trauma Stress. 2013 Jun;26(3):413-7. doi: 10.1002/jts.21820. Attachment narratives in refugee children: interrater reliability and qualitative analysis in pilot findings from a two-site study.......J Trauma Stress. 2013 Jun;26(3):413-7. doi: 10.1002/jts.21820. Attachment narratives in refugee children: interrater reliability and qualitative analysis in pilot findings from a two-site study....

  11. Comments of the PRA Senior Review Panel on the meeting held December 1--3, 1987

    Sharp, D.A.

    1988-01-01

    This memorandum records the minutes of the PRA Senior Review Panel meeting held at Savannah River Laboratory (SRL) on December 1--3, 1987, and the report on that meeting written subsequently by the panel members. The minutes are contained as Attachment 2 of this memorandum, and the report as Attachment 1. The Panel indicated two principal concerns in their report: (1) that insufficient emphasis is being placed on the reliability data development program, and (2) that excessive detail is being built into the fault trees. These concerns have been addressed in a subsequent meeting with the Panel, held March 2--4, 1988. In addition, the members have been provided with a program document (Reference 1) indicating the extent, the timing, and the limitations of the data analysis effort for the PRA

  12. Panel data analysis using EViews

    Agung, I Gusti Ngurah

    2013-01-01

    A comprehensive and accessible guide to panel data analysis using EViews software This book explores the use of EViews software in creating panel data analysis using appropriate empirical models and real datasets. Guidance is given on developing alternative descriptive statistical summaries for evaluation and providing policy analysis based on pool panel data. Various alternative models based on panel data are explored, including univariate general linear models, fixed effect models and causal models, and guidance on the advantages and disadvantages of each one is given. Panel Data Analysis

  13. Lightweight, Thermally Insulating Structural Panels

    Eisen, Howard J.; Hickey, Gregory; Wen, Liang-Chi; Layman, William E.; Rainen, Richard A.; Birur, Gajanana C.

    1996-01-01

    Lightweight, thermally insulating panels that also serve as structural members developed. Honeycomb-core panel filled with low-thermal-conductivity, opacified silica aerogel preventing convection and minimizes internal radiation. Copper coating on face sheets reduces radiation. Overall thermal conductivities of panels smaller than state-of-art commercial non-structurally-supporting foam and fibrous insulations. On Earth, panels suitable for use in low-air-pressure environments in which lightweight, compact, structurally supporting insulation needed; for example, aboard high-altitude aircraft or in partially evacuated panels in refrigerators.

  14. Thermal insulating panel

    Hughes, J.T.

    1985-09-11

    A panel of thermal insulation material has at least one main portion which comprises a dry particulate insulation material compressed within a porous envelope so that it is rigid or substantially rigid and at least one auxiliary portion which is secured to and extends along at least one of the edges of the main portions. The auxiliary portions comprise a substantially uncompressed dry particulate insulation material contained within an envelope. The insulation material of the auxiliary portion may be the same as or may be different from the insulation material of the main portion. The envelope of the auxiliary portion may be made of a porous or a non-porous material. (author).

  15. Photovoltaic panel clamp

    Mittan, Margaret Birmingham [Oakland, CA; Miros, Robert H. J. [Fairfax, CA; Brown, Malcolm P [San Francisco, CA; Stancel, Robert [Loss Altos Hills, CA

    2012-06-05

    A photovoltaic panel clamp includes an upper and lower section. The interface between the assembled clamp halves and the module edge is filled by a flexible gasket material, such as EPDM rubber. The gasket preferably has small, finger like protrusions that allow for easy insertion onto the module edge while being reversed makes it more difficult to remove them from the module once installed. The clamp includes mounting posts or an integral axle to engage a bracket. The clamp also may include a locking tongue to secure the clamp to a bracket.

  16. Activating Attachments Reduces Memories of Traumatic Images.

    Richard A Bryant

    Full Text Available Emotional memories, and especially intrusive memories, are a common feature of many psychological disorders, and are overconsolidated by stress. Attachment theory posits that activation of mental representations of attachment figures can reduce stress and boost coping. This study tested the proposition that attachment activation would reduce consolidation of emotional and intrusive memories. Sixty-seven undergraduate students viewed subliminal presentations of traumatic and neutral images, which were preceded by subliminal presentations of either attachment-related images or non-attachment-related images; free recall and intrusive memories were assessed two days later. Participants with low avoidant attachment tendencies who received the attachment primes recalled fewer memories and reported fewer intrusions than those who received the non-attachment primes. Unexpectedly, those with high anxious attachment tendencies reported fewer memories. These findings generally accord with attachment theory, and suggest that consolidation of emotional memories can be moderated by activation of attachment representations.

  17. Solar panel parallel mounting configuration

    Mutschler, Jr., Edward Charles (Inventor)

    1998-01-01

    A spacecraft includes a plurality of solar panels interconnected with a power coupler and an electrically operated device to provide power to the device when the solar cells are insolated. The solar panels are subject to bending distortion when entering or leaving eclipse. Spacecraft attitude disturbances are reduced by mounting each of the solar panels to an elongated boom made from a material with a low coefficient of thermal expansion, so that the bending of one panel is not communicated to the next. The boom may be insulated to reduce its bending during changes in insolation. A particularly advantageous embodiment mounts each panel to the boom with a single mounting, which may be a hinge. The single mounting prevents transfer of bending moments from the panel to the boom.

  18. Attachment for mass exchange apparatus

    Maksimenko, M.Z.; Maksimenko, M.M.; Prokopov, O.I.

    1982-01-01

    An attachment is proposed which contains a cylindrical housing in which the windows are profiled with inward bent windows. In order to improve the effectiveness of the attachment by increasing its surface, and mobility, the ends of the housing are equipped with inner annular partitions with radial cross sections. The sections of the partitions between them are bent inwards towards the forming housing in series, from the side of each section. The inward-bent sections of the partitions and the edges are directed to one side or to different sides.

  19. Reliability Study in Solar Panels

    Español Lifante, Albert

    2012-01-01

    Crystalline silicon Modules are formed by single silicon photovoltaic cells. Since each one of these cells individually contributes to the overall electric power of the panel, the failure of one of them directly affects to its benefits and performance. To Minimize these negative effects, junction boxes with few bypass diodes are usually included in Photovoltaic Solar panels. A still experimental way to built solar panels is to integrate bypass diodes in every single cell, which would in...

  20. ALDS 1978 panel review. [PNL

    Hall, D.L. (ed.)

    1979-08-01

    Pacific Northwest Laboratory (PNL) is examining the analysis of large data sets (ALDS). After one year's work, a panel was convened to evaluate the project. This document is the permanent record of that panel review. It consists of edited transcripts of presentations made to the panel by the PNL staff, a summary of the responses of the panel to these presentations, and PNL's plans for the development of the ALDS project. The representations of the PNL staff described various aspects of the project and/or the philosophy surrounding the project. Supporting materials appear in appendixes. 20 figures, 4 tables. (RWR)

  1. Structural Interfaces and Attachments in Biology

    Birman, Victor; Genin, Guy

    2013-01-01

    Attachment of dissimilar materials in engineering and surgical practice is a perennial challenge. Bimaterial attachment sites are common locations for injury, repeated injury, and mechanical failure. Nature presents several highly effective solutions to the challenge of bimaterial attachment that differ from those found in engineering practice. Structural Interfaces and Attachments in Biology describes the attachment of dissimilar materials from multiple perspectives. The text will simultaneously elucidate natural bimaterial attachments and outline engineering principles underlying successful attachments to the communities of tissue engineers and surgeons. Included an in-depth analysis of the biology of attachments in the body and mechanisms by which robust attachments are formed, a review of current concepts of attaching dissimilar materials in surgical practice and a discussion of bioengineering approaches that are currently being developed. This book also: Provides the first comprehensive treatment of phys...

  2. Attachment Theory: Progress and Future Directions

    Fearon, R. M. P.; Roisman, G. I.

    2017-01-01

    Attachment is a key subfield in the area of parenting and parent-child relationships research. In this brief overview, we summarise what we consider to be the state-of-the-art of attachment research, focusing primarily on the nature and significance of attachment in infancy and early childhood. We review 4 major topics that are central issues in the scientific literature on attachment: (1) the role of the environment in the development of attachment, (2) the intergenerational transmission of ...

  3. Packaging, deployment, and panel design concepts for a truss-stiffened 7-panel precision deployable reflector with feed boom

    Heard, Walter L., Jr.; Collins, Timothy J.; Dyess, James W.; Kenner, Scott; Bush, Harold G.

    1993-01-01

    A concept is presented for achieving a remotely deployable truss-stiffened reflector consisting of seven integrated sandwich panels that form the reflective surface, and an integrated feed boom. The concept has potential for meeting aperture size and surface precision requirements for some high-frequency microwave remote sensing applications. The packaged reflector/feed boom configuration is a self-contained unit that can be conveniently attached to a spacecraft bus. The package has a cylindrical envelope compatible with typical launch vehicle shrouds. Dynamic behavior of a deployed configuration having a 216-inch focal length and consisting of 80-inch-diameter, two-inch-thick panels is examined through finite-element analysis. Results show that the feed boom and spacecraft bus can have a large impact on the fundamental frequency of the deployed configuration. Two candidate rib-stiffened sandwich panel configurations for this application are described, and analytical results for panel mass and stiffness are presented. Results show that the addition of only a few rib stiffeners, if sufficiently deep, can efficiently improve sandwich panel stiffness.

  4. Proficiency testing for sensory profile panels : measuring panel performance

    Mcewan, J.A.; Hunter, E.A.; Gemert, L.J. van; Lea, P.

    2002-01-01

    Proficiency testing in sensory analysis is an important step towards demonstrating that results from one sensory panel are consistent with the results of other sensory panels. The uniqueness of sensory analysis poses some specific problems for measuring the proficiency of the human instrument

  5. Panel summary report

    Anon.

    1979-01-01

    Previous Advisory Group Meetings have led to IAEA Technical Reports No.15=5 (1974) on thermal discharge, 118 (1970) and 169 (1975) on sampling, storage and analysis methods for marine radioactivity studies, 167 (1975) on design of marine biological studies permitting comparative evaluation, and 172 (1976) on the effects of ionizing radiation on aquative organisms and eco-systems. The aim of the present report was a bringing into perspective not only problems designing radioecological experiments but to describe reliable experimental methodology suitable for a successful evaluation of radioactivity cycling, and of the effects of such radioactive additions to aquatic environments, as a result of nuclear activities. Specific examples are described. Individual studies presented to the Panel have been treated in detail, and constitute 19 separate INIS entries

  6. Resource conservation and recovery act draft hazardous waste facility permit: Waste Isolation Pilot Plant (WIPP). Attachments: Volume 4 of 4

    1993-08-01

    Volume IV contains the following attachments for Module IV: VOC monitoring plan for bin-room tests (Appendix D12); bin emission control and VOC monitoring system drawings; bin scale test room ventilation drawings; WIPP supplementary roof support system, underground storage area, room 1, panel 1, DOE/WIPP 91-057; and WIPP supplementary roof support system, room 1, panel 1, geotechnical field data analysis bi-annual report, DOE/WIPP 92-024.

  7. Variability of femoral muscle attachments.

    Duda, G N; Brand, D; Freitag, S; Lierse, W; Schneider, E

    1996-09-01

    Analytical and experimental models of the musculoskeletal system often assume single values rather than ranges for anatomical input parameters. The hypothesis of the present study was that anatomical variability significantly influences the results of biomechanical analyses, specifically regarding the moment arms of the various thigh muscles. Insertions and origins of muscles crossing or attaching to the femur were digitized in six specimens. Muscle volumes were measured; muscle attachment area and centroid location were computed. To demonstrate the influence of inter-individual anatomic variability on a mechanical modeling parameter, the corresponding range of muscle moment arms were calculated. Standard deviations, as a percentage of the mean, were about 70% for attachment area and 80% for muscle volume and attachment centroid location. The resulting moment arms of the m. gluteus maximus and m. rectus femoris were especially sensitive to anatomical variations (SD 65%). The results indicate that sensitivity to anatomical variations should be analyzed in any investigation simulating musculoskeletal interactions. To avoid misinterpretations, investigators should consider using several anatomical configurations rather than relying on a mean data set.

  8. WEAVING THE FABRIC OF ATTACHMENT

    Lindsay Stewart

    2011-09-01

    Full Text Available This article is the Keynote Address given at the 5th International Integrative Psychotherapy Association Conference in Vichy, France, April 21, 2011. In the article author describes development of secure attachment with the help of the case study.

  9. Mapping and measuring place attachment

    Brown, Greg; Raymond, Christopher Mark; Corcoran, Jonathan

    2015-01-01

    The concept of place attachment has been studied extensively across multiple disciplines but only recently with empirical measurement using public participation GIS (PPGIS) and related crowd-sourcing mapping methods. This research trialed a spatially explicit method for identifying place attachme...

  10. Strong increase of solar panels

    Segers, R.; Janssen, S.

    2012-01-01

    The number of installed solar panels in 2011 has increased again. 40 megawatt of new panels have been installed. This increase is twice as high as the year before. The production of solar power increased to 90 million kWh in 2011 as a result of this expansion. However, the share of solar power in total energy use is still very limited. [nl

  11. Panel Smooth Transition Regression Models

    González, Andrés; Terasvirta, Timo; Dijk, Dick van

    We introduce the panel smooth transition regression model. This new model is intended for characterizing heterogeneous panels, allowing the regression coefficients to vary both across individuals and over time. Specifically, heterogeneity is allowed for by assuming that these coefficients are bou...

  12. Matlab Software for Spatial Panels

    Elhorst, J.Paul

    2014-01-01

    Elhorst provides Matlab routines to estimate spatial panel data models at his website. This article extends these routines to include the bias correction procedure proposed by Lee and Yu if the spatial panel data model contains spatial and/or time-period fixed effects, the direct and indirect

  13. Attachment Styles of Dermatological Patients in Europe

    Szabó, Csanád; Altmayer, Anita; Lien, Lars

    2017-01-01

    Attachment styles of dermatological outpatients and satisfaction with their dermatologists were investigated within the framework of a multicentre study conducted in 13 European countries, organized by the European Society for Dermatology and Psychiatry. Attachment style was assessed with the Adult......, and experienced similar rates of anxiety in relationships as did the controls. Participants who had secure attachment styles reported stressful life events during the last 6 months significantly less often than those who had insecure attachment styles. Patients with secure attachment styles tended to be more...... satisfied with their dermatologist than did insecure patients. These results suggest that secure attachment of dermatological outpatients may be a protective factor in the management of stress....

  14. Panel discussion: Nuclear cardiology

    Schwaiger, M.

    1991-01-01

    The panel discussion opened with a question concerning whether true quantification of myocardial sympathetic presynaptic function or receptor density can be obtained with currently available radiopharmaceuticals. What are the relative advantages of the two general approaches that have been proposed for quantification: (1) The assessment of tracer distribution volume in tissue following bolus injection and (2) quantification based on tracer displacement kinetics following administration of excess unlabeled tracer. It was pointed out that tracer kinetics for the delineation of presynaptic and postsynaptic binding sites by radiopharmaceuticals or radiolabeled receptor antagonists are rather complex, reflecting several physiologic processes that are difficult to separate. Several approaches were examined. The possibility of regional definition of receptor density by PET was questioned and it was noted that regions of interest can be applied to calculate regional receptor kinetics. However, due to the limited spatial resolution of PET, only average transmural values can be determined. The discussion then turned to the discrepancy between the known sparse parasympathetic innervation of the heart and the high density of muscarinic receptors observed with PET. Experiences with MIBG imaging were reported, including uptake in the transplanted heart and interaction of drugs with MIBG uptake

  15. Sound Transmission Through Multi-Panel Structures Lined with Elastic Porous Materials

    Bolton, J. S.; Shiau, N.-M.; Kang, Y. J.

    1996-04-01

    Theory and measurements related to sound transmission through double panels lined with elastic porous media are presented. The information has application to the design of noise control barriers and to the optimization of aircraft fuselage transmission loss, for example. The major difference between the work described here and earlier research in this field relates to the treatment of the porous material that is used to line the cavity between the two panels of the double panel structure. Here we have used the porous material theory proposed by Biot since it takes explicit account of all the wave types known to propagate in elastic porous materials. As a result, it is possible to use the theory presented here to calculate the transmission loss of lined double panels at arbitrary angles of incidence; results calculated over a range of incidence angles may then be combined to yield the random incidence transmission loss. In this paper, the equations governing wave propagation in an elastic porous material are first considered briefly and then the general forms for the stresses and displacements within the porous material are given. Those solutions are expressed in terms of a number of constants that can be determined by application of appropriate boundary conditions. The boundary conditions required to model double panels having linings that are either directly attached to the facing panels or separated?!from them by air gaps are presented and discussed. Measurements of the random incidence transmission loss of aluminium double-panel structures lined with polyurethane foam are presented and have been found to be in good agreement with theoretical predictions. Both the theoretical predictions and the measured results have shown that the method by which an elastic porous lining material is attached to the facing panels can have a profound influence on the transmission loss of the panel system. It has been found, for example, that treatments in which the lining material

  16. 1994 Panel 1 Utilization Plan

    1994-01-01

    The Waste Isolation Pilot Plant (WIPP) is intended to receive, handle, and permanently dispose of transuranic (TRU) waste. To fulfill this mission, the U.S. Department of Energy (DOE) constructed a full-scale facility to demonstrate both technical and operational principles of the permanent isolation of TRU waste. The WIPP consists of surface and underground facilities. Panel 1 is situated in the underground facility horizon which is located approximately 2,150 feet below the surface in the predominantly halite Salado Formation. The Panel 1 Utilization Plan provides a strategy for the optimum use of Panel 1 which is consistent with the priorities established by the DOE to accomplish the WIPP mission. These priorities, which include maintaining personnel safety, conducting performance assessment, and continued operational enhancements, are the guiding premise for the decisions on the planned usage of the WIPP underground facility. The continuation of ongoing investigations along with the planned testing and training to be carried out in Panel 1 will enhance the current knowledge and understanding of the operational and geotechnical aspects of the panel configuration. This enhancement will ultimately lead to safer, more efficient, and more cost-effective methods of operation. Excavation of the waste storage area began in May 1986 with the mining of entries to Panel 1. The original design for the waste storage rooms at the WIPP provided a limited period of time during which to mine the openings and to emplace waste. Each panel, consisting of seven storage rooms, was scheduled to be mined and filled in less than 5 years. Panel 1 was developed to receive waste for a demonstration phase that was scheduled to start in October 1988. The demonstration phase was deferred, and the experimental test program was modified to use contact-handled (CH) transuranic waste in bin-scale tests, planned for Room 1, Panel 1

  17. Thermal Analysis of Solar Panels

    Barth, Nicolas; de Correia, João Pedro Magalhães; Ahzi, Saïd; Khaleel, Mohammad Ahmed

    In this work, we propose to analyze the thermal behavior of PV panels using finite element simulations (FEM). We applied this analysis to compute the temperature distribution in a PV panel BP 350 subjected to different atmospheric conditions. This analysis takes into account existing formulations in the literature and, based on NOCT conditions, meteorological data was used to validate our approach for different wind speed and solar irradiance. The electrical performance of the PV panel was also studied. The proposed 2D FEM analysis is applied to different region's climates and was also used to consider the role of thermal inertia on the optimization of the PV device efficiency.

  18. Attachment theory: progress and future directions.

    Fearon, R M Pasco; Roisman, Glenn I

    2017-06-01

    Attachment is a key subfield in the area of parenting and parent-child relationships research. In this brief overview, we summarise what we consider to be the state-of-the-art of attachment research, focusing primarily on the nature and significance of attachment in infancy and early childhood. We review 4 major topics that are central issues in the scientific literature on attachment: (1) the role of the environment in the development of attachment, (2) the intergenerational transmission of patterns of attachment, (3) the stability of attachment patterns through early adulthood, and (4) the role of attachment in adjustment and maladjustment. We conclude by highlighting several critical unresolved issues and priorities for future research. Copyright © 2017. Published by Elsevier Ltd.

  19. Attachment Theory, Foster Parents and Diversity Tolerance

    Kenny, Michael; Fleming, Ted

    2009-01-01

    relevance to attachment within the biological and foster family. Yet every foster parent has a childhood attachment history that influences their interpersonal relationships in adulthood. The primary concern of the foster parent and their supports is with the foster child. But as a result the foster parent may distract or block reflection on their own attachment history. This presentation will focus on attachment theory and the adult, with particular reference to the foster parent. The pre...

  20. Electro-desalination of glazed tile panels - discussion of possibilities

    Dias-Ferreira, Célia; Ottosen, Lisbeth M.; Ribeiro, Alexandra B.

    2016-01-01

    . In the few experiments conducted on tiles with attached mortar, the mortar was desalinated to a higher degree than the biscuit and successful desalination of the biscuit through the mortar requires further research. In-situ pilot scale tests were performed on highly salt-contaminated walls without tiles...... by placing electrodes at the same side of the wall. Thus it may be possible to desalinate tile panels, without any physical damage of the fragile glaze, by placing electrodes on the back of the wall or by removing some tiles, placing electrodes in their spaces, and extracting the salts from there before...... the tiles are placed back again....

  1. Attachment in Middle Childhood: Progress and Prospects

    Bosmans, Guy; Kerns, Kathryn A.

    2015-01-01

    Contrary to the substantial amount of research on infant, preschool, adolescent, and adult attachment, middle childhood has long been neglected by the international attachment research community. In the past two decades, however, there has been a steep increase in research focusing on middle childhood attachment. This article provides an overview…

  2. Exascale Workshop Panel Report Meeting

    Khaleel, Mohammad A.

    2010-07-01

    The Exascale Review Panel consists of 12 scientists and engineers with experience in various aspects of high-performance computing and its application, development, and management. The Panel hear presentations by several representatives of the workshops and town meetings convened over the past few years to examine the need for exascale computation capability and the justification for a U.S. Department of Energy (DOE) program to develop such capability. This report summarizes information provided by the presenters and substantial written reports to the Panel in advance of the meeting in Washington D.C. on January 19-20, 2010. The report also summarizes the Panel's conclusions with regard to the justification of a DOE-led exascale initiative.

  3. Active sound transmission control of an experimental double-panel partition using decoupled, dual-channel, analog feedback control

    Sagers, Jason; Blotter, Jonathan

    2008-01-01

    This paper addresses the construction, measurement, and analysis of a double panel active partition (DPAP) and its accompanying analog feedback controllers. The DPAP was constructed by attaching an aluminum cone loudspeaker at each end of a short segment of a circular duct. Two analog feedback controllers were designed and built using the measured frequency response function of each panel. Two independent (decoupled) feedback controllers were then used to minimize the vibration amplitude of e...

  4. Split ring containment attachment device

    Sammel, A.G.

    1996-01-01

    A containment attachment device is described for operatively connecting a glovebag to plastic sheeting covering hazardous material. The device includes an inner split ring member connected on one end to a middle ring member wherein the free end of the split ring member is inserted through a slit in the plastic sheeting to captively engage a generally circular portion of the plastic sheeting. A collar potion having an outer ring portion is provided with fastening means for securing the device together wherein the glovebag is operatively connected to the collar portion. 5 figs

  5. Peer Attachment, Perceived Parenting Style, Self-concept, and School Adjustments in Adolescents with Chronic Illness

    Jeong-Ah Ahn, PhD, RN; Sunhee Lee, PhD, RN

    2016-01-01

    Purpose: The purpose of this study was to identify how peer attachment and parenting style differentially affect self-concept and school adjustment in adolescents with and without chronic illness. Methods: A cross-sectional study using multiple group analysis on the Korean panel data was used. A nationwide stratified multistage cluster sampling method was used and the survey was conducted in 2013 on 2,092 first-year middle school students in Korea. We used standardized instruments by the N...

  6. Sound-proof Sandwich Panel Design via Metamaterial Concept

    Sui, Ni

    Sandwich panels consisting of hollow core cells and two face-sheets bonded on both sides have been widely used as lightweight and strong structures in practical engineering applications, but with poor acoustic performance especially at low frequency regime. Basic sound-proof methods for the sandwich panel design are spontaneously categorized as sound insulation and sound absorption. Motivated by metamaterial concept, this dissertation presents two sandwich panel designs without sacrificing weight or size penalty: A lightweight yet sound-proof honeycomb acoustic metamateiral can be used as core material for honeycomb sandwich panels to block sound and break the mass law to realize minimum sound transmission; the other sandwich panel design is based on coupled Helmholtz resonators and can achieve perfect sound absorption without sound reflection. Based on the honeycomb sandwich panel, the mechanical properties of the honeycomb core structure were studied first. By incorporating a thin membrane on top of each honeycomb core, the traditional honeycomb core turns into honeycomb acoustic metamaterial. The basic theory for such kind of membrane-type acoustic metamaterial is demonstrated by a lumped model with infinite periodic oscillator system, and the negative dynamic effective mass density for clamped membrane is analyzed under the membrane resonance condition. Evanescent wave mode caused by negative dynamic effective mass density and impedance methods are utilized to interpret the physical phenomenon of honeycomb acoustic metamaterials at resonance. The honeycomb metamaterials can extraordinarily improve low-frequency sound transmission loss below the first resonant frequency of the membrane. The property of the membrane, the tension of the membrane and the numbers of attached membranes can impact the sound transmission loss, which are observed by numerical simulations and validated by experiments. The sandwich panel which incorporates the honeycomb metamateiral as

  7. Attachment style and adjustment to divorce.

    Yárnoz-Yaben, Sagrario

    2010-05-01

    Divorce is becoming increasingly widespread in Europe. In this study, I present an analysis of the role played by attachment style (secure, dismissing, preoccupied and fearful, plus the dimensions of anxiety and avoidance) in the adaptation to divorce. Participants comprised divorced parents (N = 40) from a medium-sized city in the Basque Country. The results reveal a lower proportion of people with secure attachment in the sample group of divorcees. Attachment style and dependence (emotional and instrumental) are closely related. I have also found associations between measures that showed a poor adjustment to divorce and the preoccupied and fearful attachment styles. Adjustment is related to a dismissing attachment style and to the avoidance dimension. Multiple regression analysis confirmed that secure attachment and the avoidance dimension predict adjustment to divorce and positive affectivity while preoccupied attachment and the anxiety dimension predicted negative affectivity. Implications for research and interventions with divorcees are discussed.

  8. Analysis of 3-panel and 4-panel microscale ionization sources

    Natarajan, Srividya; Parker, Charles B.; Glass, Jeffrey T.; Piascik, Jeffrey R.; Gilchrist, Kristin H.; Stoner, Brian R.

    2010-01-01

    Two designs of a microscale electron ionization (EI) source are analyzed herein: a 3-panel design and a 4-panel design. Devices were fabricated using microelectromechanical systems technology. Field emission from carbon nanotube provided the electrons for the EI source. Ion currents were measured for helium, nitrogen, and xenon at pressures ranging from 10 -4 to 0.1 Torr. A comparison of the performance of both designs is presented. The 4-panel microion source showed a 10x improvement in performance compared to the 3-panel device. An analysis of the various factors affecting the performance of the microion sources is also presented. SIMION, an electron and ion optics software, was coupled with experimental measurements to analyze the ion current results. The electron current contributing to ionization and the ion collection efficiency are believed to be the primary factors responsible for the higher efficiency of the 4-panel microion source. Other improvements in device design that could lead to higher ion source efficiency in the future are also discussed. These microscale ion sources are expected to find application as stand alone ion sources as well as in miniature mass spectrometers.

  9. High temperature structural sandwich panels

    Papakonstantinou, Christos G.

    High strength composites are being used for making lightweight structural panels that are being employed in aerospace, naval and automotive structures. Recently, there is renewed interest in use of these panels. The major problem of most commercial available sandwich panels is the fire resistance. A recently developed inorganic matrix is investigated for use in cases where fire and high temperature resistance are necessary. The focus of this dissertation is the development of a fireproof composite structural system. Sandwich panels made with polysialate matrices have an excellent potential for use in applications where exposure to high temperatures or fire is a concern. Commercial available sandwich panels will soften and lose nearly all of their compressive strength temperatures lower than 400°C. This dissertation consists of the state of the art, the experimental investigation and the analytical modeling. The state of the art covers the performance of existing high temperature composites, sandwich panels and reinforced concrete beams strengthened with Fiber Reinforced Polymers (FRP). The experimental part consists of four major components: (i) Development of a fireproof syntactic foam with maximum specific strength, (ii) Development of a lightweight syntactic foam based on polystyrene spheres, (iii) Development of the composite system for the skins. The variables are the skin thickness, modulus of elasticity of skin and high temperature resistance, and (iv) Experimental evaluation of the flexural behavior of sandwich panels. Analytical modeling consists of a model for the flexural behavior of lightweight sandwich panels, and a model for deflection calculations of reinforced concrete beams strengthened with FRP subjected to fatigue loading. The experimental and analytical results show that sandwich panels made with polysialate matrices and ceramic spheres do not lose their load bearing capability during severe fire exposure, where temperatures reach several

  10. Networked Attached Devices at SNS

    Blokland, W

    2003-01-01

    The Spallation Neutron Source (SNS) diagnostic instruments at Oak Ridge National Laboratory are based on the Network Attached Device (NAD) concept. Each pickup or sensor has its own resources such as timing, data acquisition and processing. NADs are individually connected to the network, thus reducing the brittleness inherent in tightly coupled systems. This architecture allows an individual device to fail or to be serviced or removed without disrupting other devices. This paper describes our implementation of the nearly 400 NADs to be deployed. The hardware consists of rack-mounted PCs with standard motherboards and PCI data-acquisition boards. The software environment is based on LabVIEW and EPICS. LabVIEW supports the agile development demanded by modern diagnostic systems. EPICS is the control system standard for the entire SNS facility. To achieve high performance, LabVIEW and EPICS communicate through shared memory. SNS diagnostics are developed by a multi-laboratory partnership including ORNL, BNL, LAN...

  11. Multipurpose hooks for elastic attachment

    Siddharth Shashidhar Revankar

    2014-01-01

    Full Text Available As certain bracket systems do not include hooks on premolar brackets for elastic attachment, Kobayashi or custom made ligature hooks have proven as an alternative. However, these hooks tend to bend labially when used with heavy elastics and these elastics can even pop loose from the hooks on mouth opening. The following article describes an innovative multipurpose hook which is simple, stiff and inexpensive and can be used for engagement of class II elastics on premolars in case of missing molars as well as engagement of intermaxillary elastics for settling of occlusion in finishing stages. As the hooks can be prefabricated, this saves a lot of chair side time and is more practical for use in day-to-day orthodontic practice.

  12. Solar Panel based Milk Pasteurization

    Nielsen, Kirsten Mølgaard; Pedersen, Tom Søndergaard

    This paper treats the subject of analysis, design and development of the control system for a solar panel based milk pasteurization system to be used in small villages in Tanzania. The analysis deals with the demands for an acceptable pasteurization, the varying energy supply and the low cost, low...... complexity, simple user interface and high reliability demands. Based on these demands a concept for the pasteurization system is established and a control system is developed. A solar panel has been constructed and the energy absorption has been tested in Tanzania. Based on the test, the pasteurization...... system is dimensioned. A functional prototype of the pasteurization facility with a capacity of 200 l milk/hour has been developed and tested. The system is prepared for solar panels as the main energy source and is ready for a test in Tanzania....

  13. Solar Panel based Milk Pasteurization

    Nielsen, Kirsten Mølgaard; Pedersen, Tom Søndergaard

    2002-01-01

    This paper treats the subject of analysis, design and development of the control system for a solar panel based milk pasteurization system to be used in small villages in Tanzania. The analysis deals with the demands for an acceptable pasteurization, the varying energy supply and the low cost, low...... complexity, simple user interface and high reliability demands. Based on these demands a concept for the pasteurization system is established and a control system is developed. A solar panel has been constructed and the energy absorption has been tested in Tanzania. Based on the test, the pasteurization...... system is dimensioned. A functional prototype of the pasteurization facility with a capacity of 200 l milk/hour has been developed and tested. The system is prepared for solar panels as the main energy source and is ready for a test in Tanzania....

  14. Performance power evaluation of DC fan cooling system for PV panel by using ANSYS CFX

    Syafiqah, Z.; Amin, N. A. M.; Irwan, Y. M.; Irwanto, M.; Leow, W. Z.; Amelia, A. R.

    2017-09-01

    A research has been conducted to find the optimum combination for DC fan air cooling system of photovoltaic (PV) panel. During normal operation of PV panel, it is estimated that only 15 % of solar radiation is converted into electrical energy. Meanwhile, the rest of the solar radiation is converted into heat energy which affects the performance of the PV panel. Therefore, the aim of this research is to investigate the performance power evaluation of DC fan cooling system for PV panel by using ANSYS CFX. The effect of airflow configuration of DC fan has been investigated. This is to analyze whether the airflow circulation of DC fan cause a change towards the maximum temperature of PV panel. Besides, the impact of varying number of DC fans attached at the back of PV panel is evaluated. The result of airflow circulation of DC fan has been discussed. Meanwhile, with the increment number of DC fans, the PV panel temperature drops significantly. As a conclusion, the optimum number of DC fans is two with the combination of inlet airflow.

  15. Association Between Insecure Attachment and ADHD

    Storebø, Ole Jakob; Rasmussen, Pernille Darling; Simonsen, Erik

    2016-01-01

    OBJECTIVE: Psychological theories have postulated an association between insecure attachment and ADHD. The objective of this study is to investigate possible association between insecure attachment and ADHD in children and adults. METHOD: Review of literature was performed using the Psyc......INFO, Medline, and EMBASE databases. RESULTS: Twenty-nine studies were included in the review. Overall, the studies showed that parental attachment problems and environmental mediating factors were significantly associated with childhood ADHD. Adults with ADHD had a much higher incidence of insecure attachment...... styles than reported in the general population. CONCLUSION: There seems to be a clear association between ADHD and insecure attachment. It is likely that early intervention in the form of parent training and pharmacological treatment may prevent development of attachment problems. But such studies have...

  16. Attachment theory: A review of research

    Polovina Nada

    2005-01-01

    Full Text Available Research of attachment is numerous and versatile. They differ according to problems addressed, methodology applied (longitudinal studies, studies with horizontal designs, different instruments used, different methods of data analysis, and characteristics of samples involved (concerning age socio/economic status, family ecology. The research is commonly relied on the core assumptions of the theory itself, and the shared characteristic is orientation to explore complex phenomena of human experience and functioning. From the vast variety of research only those who most directly test the basic assumptions of the attachment theory are focused and addressed in the paper: representation of patterns of attachment in the childhood and adulthood, stability and change of attachment security from infancy to early adulthood, transgenerational transmission of attachment characteristics, the place and the role of attachment behavioral system in the personality development. The aim of the paper is to highlight the basic research and theory issues and directions, and illustrate them with concrete research date.

  17. Place attachment and disasters: Knowns and unknowns.

    Jamali, Mehdi; Nejat, Ali

    When considering the factors important for disaster recovery, one must consider the attachment individuals have toward their living area. This article reviews and synthesizes the current literature on the determinants of place attachment in the context of postdisaster recovery. Although the majority of the reviewed articles focused on disaster recovery, there were some which had a broader scope and were included due to their importance. This research categorizes the determinants of place attachment into four categories: demographic, socioeconomic, spatial, and psychosocial. Age, ethnicity, and religion were grouped under the category of demographics. Job status, education, and property ownership were categorized under the socioeconomic category. Attachment to home, neighborhood, and city, together with attachment to rural and urban areas, were grouped under the spatial category. Finally, mental health status and community attachment were classified under the psychosocial heading. Based on the outcome of the aforementioned synthesis, this article develops a conceptual framework to guide future research.

  18. Place attachment and natural environmental risk

    Bonaiuto, Marino; Alves, Susana; De Dominicis, Stefano

    2016-01-01

    Little is known about place attachment affecting natural environmental risk perception and coping. A systematic search of social science databases revealed 31 works (1996–2016) directly addressing place attachment in relation to different types of natural hazard risks (e.g., seismic, volcanic, etc.......). Across different contexts, the research shows: (a) positive and/or negative relationships between place attachment and natural environmental risk perception; (b) positive and/or negative relationships between place attachment and risk coping; and (c) mediating and moderating relationships. In particular......, results show that: (a) highly attached individuals perceive natural environmental risks but underestimate their potential effects; (b) highly attached individuals are unwilling to relocate when facing natural environmental risks and more likely to return to risky areas after a natural environmental...

  19. Analysis of an Attached Sunspace with a Thermal Inertia Floor

    María José Suárez López

    2018-05-01

    Full Text Available An attached sunspace is a partially or fully glazed enclosure, usually located on the first floor, facing south (in the Northern Hemisphere and adjacent to a conditioned room. Because of the length and orientation of the glazed area, the temperature in the sunspace is usually higher than outside the building. As a Trombe–Mitchel wall, the sunspace has a considerable mass that accumulates thermal energy, but in this case the thermal mass is located in the floor. This capacity to accumulate thermal energy confers the attached sunspace features beyond passive insulation. The sunspace studied in this paper is part of an experimental building located in the North of Spain that was built in the frame of the so-called ARFRISOL project. It consists of a south-facing glazed exterior wall with both clear glass and semi-transparent photovoltaic panels, an intermediate space with a thick layer of sand over a concrete floor, and a partially glazed interior wall. In this paper, a three-dimensional computational model has been implemented to analyse the thermal behaviour inside the sunspace. This analysis takes into account, among other factors, the effects of sun position, incident solar irradiation and temperature both inside and outside.

  20. Attachment style and interpersonal trauma in refugees.

    Morina, Naser; Schnyder, Ulrich; Schick, Matthis; Nickerson, Angela; Bryant, Richard A

    2016-12-01

    Refugees can suffer many experiences that threaten their trust in others. Although models of refugee mental health have postulated that attachment securities may be damaged by refugee experiences, this has yet to be empirically tested. This study aimed to understand the relationship between the nature of traumatic experiences sustained by refugees and attachment styles. In a cross-sectional study, treatment-seeking refugees (N = 134) were assessed for traumatic exposure using the Harvard Trauma Questionnaire and Posttraumatic Diagnostic Scale. Attachment style was assessed using the Experiences in Close Relationship Scale. Whereas gender and severity of interpersonal traumatic events predicted avoidant attachment style (accounting for 11% of the variance), neither these factors nor non-interpersonal trauma predicted anxious attachment. Exposure to interpersonal traumatic events, including torture, is associated with enduring avoidant attachment tendencies in refugees. This finding accords with attachment theories that prior adverse interpersonal experiences can undermine secure attachment systems, and may promote avoidance of attachment seeking. This finding may point to an important process maintaining poor psychological health in refugees affected by interpersonal trauma. © The Royal Australian and New Zealand College of Psychiatrists 2016.

  1. Temperament and attachment: one construct or two?

    Mangelsdorf, S C; Frosch, C A

    1999-01-01

    In this chapter we described the constructs of temperament and attachment and have discussed similarities and differences between the two. We addressed the issue of whether temperament contributes to overall attachment security or to the specific type of attachment that children display. We conclude that although temperament may influence the type of secure and insecure attachment relationship children form with their parent, temperament alone will not determine if a child is classified as securely or insecurely attached. We presented evidence suggesting that certain dimensions of temperament, specifically negative emotionality, may be associated with infants' behavior during the Strange Situation, such as proneness-to-distress during separations. However, we noted that these temperament dimensions do not predict overall security of attachment. It is likely that although no single temperament characteristic, such as proneness-to-distress, in and of itself determines overall attachment security, it is possible that a constellation of temperament characteristics may be more strongly related to attachment security. The examination of constellations of temperament characteristics may be particularly useful for furthering our understanding of individual differences within attachment classifications. Such an approach may elucidate the reasons why infants are classified into one subgroup of secure, insecure-avoidant, or insecure-resistant attachment versus another subgroup. Furthermore, we suggest that the collection of findings regarding temperament and attachment not only underscores the importance of a transactional approach to early social-emotional development, but emphasizes that temperament and attachment can make unique and interactive contributions to children's social-emotional functioning. That is, the goodness-of-fit between infant and parent characteristics may best predict security of attachment. Although child characteristics clearly contribute to the

  2. Security for Network Attached Storage Devices

    Gobioff, Howard

    1997-01-01

    This paper presents a novel cryptographic capability system addressing the security and performance needs of network attached storage systems in which file management functions occur at a different...

  3. Sine-Bar Attachment For Machine Tools

    Mann, Franklin D.

    1988-01-01

    Sine-bar attachment for collets, spindles, and chucks helps machinists set up quickly for precise angular cuts that require greater precision than provided by graduations of machine tools. Machinist uses attachment to index head, carriage of milling machine or lathe relative to table or turning axis of tool. Attachment accurate to 1 minute or arc depending on length of sine bar and precision of gauge blocks in setup. Attachment installs quickly and easily on almost any type of lathe or mill. Requires no special clamps or fixtures, and eliminates many trial-and-error measurements. More stable than improvised setups and not jarred out of position readily.

  4. Overdenture locator attachments for atrophic mandible

    Neerja Mahajan

    2013-01-01

    Full Text Available Implant-supported overdentures provide a good opportunity for dentists to improve oral health and quality-of-life of patients. Atrophic mandible poses a significant challenge to successful oral rehabilitation with dental implants. In this article, the fabrication of lower overdenture by two narrow platform implants is described with dual retentive, resilient, self-locating locator attachment system. The locator attachment system has the lowest profile in comparison with the ball and bar attachments and is versatile up to 40΀ of divergence between two implants. By using locators as attachments, we can meet functional, economic and social expectation of patients with ease and satisfaction.

  5. Solar panel truss mounting systems and methods

    Al-Haddad, Tristan Farris; Cavieres, Andres; Gentry, Russell; Goodman, Joseph; Nolan, Wade; Pitelka, Taylor; Rahimzadeh, Keyan; Brooks, Bradley; Lohr, Joshua; Crooks, Ryan; Porges, Jamie; Rubin, Daniel

    2016-06-28

    An exemplary embodiment of the present invention provides a solar panel truss mounting system comprising a base and a truss assembly coupled to the base. The truss assembly comprises a first panel rail mount, second panel rail mount parallel to the first panel rail mount, base rail mount parallel to the first and second panel rail mounts, and a plurality of support members. A first portion of the plurality of support members extends between the first and second panel rail mounts. A second portion of the plurality of support members extends between the first panel rail mount and the base rail mount. A third portion of the plurality of support members extends between the second panel rail mount and the base rail mount. The system can further comprise a plurality of connectors for coupling a plurality of photovoltaic solar panels to the truss assembly.

  6. Solar panel truss mounting systems and methods

    Al-Haddad, Tristan Farris; Cavieres, Andres; Gentry, Russell; Goodman, Joseph; Nolan, Wade; Pitelka, Taylor; Rahimzadeh, Keyan; Brooks, Bradley; Lohr, Joshua; Crooks, Ryan; Porges, Jamie; Rubin, Daniel

    2018-01-30

    An exemplary embodiment of the present invention provides a solar panel truss mounting system comprising a base and a truss assembly coupled to the base. The truss assembly comprises a first panel rail mount, second panel rail mount parallel to the first panel rail mount, base rail mount parallel to the first and second panel rail mounts, and a plurality of support members. A first portion of the plurality of support members extends between the first and second panel rail mounts. A second portion of the plurality of support members extends between the first panel rail mount and the base rail mount. A third portion of the plurality of support members extends between the second panel rail mount and the base rail mount. The system can further comprise a plurality of connectors for coupling a plurality of photovoltaic solar panels to the truss assembly.

  7. Solar panel truss mounting systems and methods

    Al-Haddad, Tristan Farris; Cavieres, Andres; Gentry, Russell; Goodman, Joseph; Nolan, Wade; Pitelka, Taylor; Rahimzadeh, Keyan; Brooks, Bradley; Lohr, Joshua; Crooks, Ryan; Porges, Jamie; Rubin, Daniel

    2015-10-20

    An exemplary embodiment of the present invention provides a solar panel truss mounting system comprising a base and a truss assembly coupled to the base. The truss assembly comprises a first panel rail mount, second panel rail mount parallel to the first panel rail mount, base rail mount parallel to the first and second panel rail mounts, and a plurality of support members. A first portion of the plurality of support members extends between the first and second panel rail mounts. A second portion of the plurality of support members extends between the first panel rail mount and the base rail mount. A third portion of the plurality of support members extends between the second panel rail mount and the base rail mount. The system can further comprise a plurality of connectors for coupling a plurality of photovoltaic solar panels to the truss assembly.

  8. Fabrication of a first wall panel by diffusion bonding

    Moreschi, L.F.; Pizzuto, A.; Alessandrini, I.

    2002-01-01

    Separated First Wall Panels mechanically attached to a shield block is now the reference concept for the Primary Wall Modules of RTO/RC ITER. The objective of the present work is to demonstrate the practical feasibility of a First Wall Panel utilizing a duplex round (steel) in square (copper) heat sink wound around a steel core and covered by Beryllium armour tiles. These three different materials (Be, Cu, steel) are joined together by diffusion bonding. The Copper alloy/stainless steel and Copper alloy/Beryllium joints were studied and developed selecting the optimal parameters for the related diffusion process. Several specimens were manufactured to be mechanically and thermally tested. The joints were mechanically tested using dedicated press equipment and investigated by micro-structural analysis with optical and SEM microscopy. Some thermal tests were finally carried out using an Electron Beam Facility. A dedicated R and D programme has led to the development of a co-drawing process, suitable for manufacturing the duplex Copper alloy-stainless steel heat sink. Two mock-ups were manufactured, the first in reduced-scale to test the thermal performance of the system, the second of larger scale and geometry better to represent the First Wall Panel

  9. Mobile response in web panels

    de Bruijne, M.A.; Wijnant, A.

    2014-01-01

    This article investigates unintended mobile access to surveys in online, probability-based panels. We find that spontaneous tablet usage is drastically increasing in web surveys, while smartphone usage remains low. Further, we analyze the bias of respondent profiles using smartphones and tablets

  10. Keuringspanele ("Screening Panels") as Gepaste ...

    In this particular article attention is paid to screening panels as pre-trial mechanism with the exclusive purpose to select malpractice disputes, discourage unfounded disputes and to encourage an early settlement in case of a prima facie case. Several objections have been raised by critics in this regard, for instance, ...

  11. ASIST 2003: Part II: Panels.

    Proceedings of the ASIST Annual Meeting, 2003

    2003-01-01

    Forty-six panels address topics including women in information science; users and usability; information studies; reference services; information policies; standards; interface design; information retrieval; information networks; metadata; shared access; e-commerce in libraries; knowledge organization; information science theories; digitization;…

  12. Risk-based decisionmaking (Panel)

    Smith, T.H.

    1995-12-31

    By means of a panel discussion and extensive audience interaction, explore the current challenges and progress to date in applying risk considerations to decisionmaking related to low-level waste. This topic is especially timely because of the proposed legislation pertaining to risk-based decisionmaking and because of the increased emphasis placed on radiological performance assessments of low-level waste disposal.

  13. Performance in cooling mode of a heat pump using panels with PV cells as the condenser; Taiyo denchitsuki panel wo gyoshukuki to shita heat pump no reibo unten

    Kawamura, T; Ito, S; Miura, N [Kanagawa Institute of Technology, Kanagawa (Japan); Fujita, M [Chubu Electric Power Co. Inc., Nagoya (Japan)

    1996-10-27

    Comparison was made between heat pumps in cooling operation, one having two panels provided with solar cells, the second having an air-cooled heat exchanger alone, and the third having a series connection of a panel unit and air-cooled heat exchanger, all serving as condenser. The results are shown below. In the case of two-panel-unit condenser, there is a difference ({Delta}t) of 15{degree}C between the daytime free air temperature and condensing temperature but, with decreased insolation, free air temperature, and wind speed in the evening, the {Delta}t lowered to approximately 8{degree}C while the COP (coefficient of performance) increased from 2.4 to 3.3. On a cloudy day in summer, the two-panel-unit condenser had a {Delta}t of 13.9{degree}C and a COP of 3.1. In the case of the series-connection condenser, the {Delta}t was approximately 8{degree}C and the COP was 3.5. The COP of the two-panel-unit condenser was lower than that of the air-cooled heat exchanger by 9% at an insolation of 442W/m{sup 2} but it rose to 12% in the absence of insolation. The COP of the two-panel-unit condenser was higher than that of a one-panel-unit condenser by 17%. When an insulator plate was attached to the back of a panel, the {Delta}t increased but the COP decreased by 14%. In the case of the series-connection condenser, the COP increased by 6% in the absence of the insulator plate. 2 refs., 9 figs.

  14. Measuring Patients’ Attachment Avoidance in Psychotherapy: Development of the Attachment Avoidance in Therapy Scale (AATS

    András Láng

    2012-11-01

    Full Text Available A new scale measuring patient-therapist attachment avoidance was developed. Attachment Avoidance in Therapy Scale is a new measure based on the Bartholomew model of adult attachment (Bartholomew & Horowitz, 1991 and the Experience in Close Relationships Scale (Brennan, Clark, & Shaver, 1998 to measure patients’ attachment avoidance towards therapists. With 112 patient-therapist dyads participating in the study, validation of a preliminary scale – measuring both attachment anxiety and attachment avoidance in therapy – took place using therapists’ evaluations of patients’ relational behavior and patients’ self-reports about their attitude toward psychotherapy. Analysis of the data revealed six underlying scales. Results showed all six scales to be reliable. Validation of scales measuring attachment anxiety failed. The importance of Attachment Avoidance in Therapy Scale and its subscales is discussed.

  15. Fixture for assembling solar panels

    Dillard, P. A.; Fritz, W. M.

    1979-01-01

    Vacuum fixture attaches array of silicon solar cells to mounting plate made of clear glass which holds and protects cells. Glass plate transmits, rather than absorbs, solar energy thus cooling cells for efficient operation. Device therefore reduces handling of cells and interconnecting conductors to one operation.

  16. Hamiltonian dynamics of preferential attachment

    Zuev, Konstantin; Papadopoulos, Fragkiskos; Krioukov, Dmitri

    2016-01-01

    Prediction and control of network dynamics are grand-challenge problems in network science. The lack of understanding of fundamental laws driving the dynamics of networks is among the reasons why many practical problems of great significance remain unsolved for decades. Here we study the dynamics of networks evolving according to preferential attachment (PA), known to approximate well the large-scale growth dynamics of a variety of real networks. We show that this dynamics is Hamiltonian, thus casting the study of complex networks dynamics to the powerful canonical formalism, in which the time evolution of a dynamical system is described by Hamilton’s equations. We derive the explicit form of the Hamiltonian that governs network growth in PA. This Hamiltonian turns out to be nearly identical to graph energy in the configuration model, which shows that the ensemble of random graphs generated by PA is nearly identical to the ensemble of random graphs with scale-free degree distributions. In other words, PA generates nothing but random graphs with power-law degree distribution. The extension of the developed canonical formalism for network analysis to richer geometric network models with non-degenerate groups of symmetries may eventually lead to a system of equations describing network dynamics at small scales. (paper)

  17. Smartphone attachment for stethoscope recording.

    Thompson, Jeff

    2015-01-01

    With the ubiquity of smartphones and the rising technology of 3D printing, novel devices can be developed that leverage the "computer in your pocket" and rapid prototyping technologies toward scientific, medical, engineering, and creative purposes. This paper describes such a device: a simple 3D-printed extension for Apple's iPhone that allows the sound from an off-the-shelf acoustic stethoscope to be recorded using the phone's built-in microphone. The attachment's digital 3D files can be easily shared, modified for similar phones and devices capable of recording audio, and in combination with 3D printing technology allow for fabrication of a durable device without need for an entire factory of expensive and specialized machining tools. It is hoped that by releasing this device as an open source set of printable files that can be downloaded and reproduced cheaply, others can make use of these developments where access to cost-prohibitive, specialized medical instruments are not available. Coupled with specialized smartphone software ("apps"), more sophisticated and automated diagnostics may also be possible on-site.

  18. Use of Internet panels to conduct surveys.

    Hays, Ron D; Liu, Honghu; Kapteyn, Arie

    2015-09-01

    The use of Internet panels to collect survey data is increasing because it is cost-effective, enables access to large and diverse samples quickly, takes less time than traditional methods to obtain data for analysis, and the standardization of the data collection process makes studies easy to replicate. A variety of probability-based panels have been created, including Telepanel/CentERpanel, Knowledge Networks (now GFK KnowledgePanel), the American Life Panel, the Longitudinal Internet Studies for the Social Sciences panel, and the Understanding America Study panel. Despite the advantage of having a known denominator (sampling frame), the probability-based Internet panels often have low recruitment participation rates, and some have argued that there is little practical difference between opting out of a probability sample and opting into a nonprobability (convenience) Internet panel. This article provides an overview of both probability-based and convenience panels, discussing potential benefits and cautions for each method, and summarizing the approaches used to weight panel respondents in order to better represent the underlying population. Challenges of using Internet panel data are discussed, including false answers, careless responses, giving the same answer repeatedly, getting multiple surveys from the same respondent, and panelists being members of multiple panels. More is to be learned about Internet panels generally and about Web-based data collection, as well as how to evaluate data collected using mobile devices and social-media platforms.

  19. Attachment and Socioemotional Problems in Middle Childhood

    Moss, Ellen; Lecompte, Vanessa

    2015-01-01

    In this article, we will evaluate the evidence concerning links between attachment and behavior problems in the middle childhood period. We will first provide a general introduction to the question of attachment and maladaptation in the middle childhood period, and then examine the recent empirical evidence with respect to both externalizing and…

  20. Parent-Child Attachment and Emotion Regulation

    Brumariu, Laura E.

    2015-01-01

    Given the centrality of both parent-child attachment and emotion regulation in children's development and adjustment, it is important to evaluate the relations between these constructs. This article discusses conceptual and empirical links between attachment and emotion regulation in middle childhood, highlights progress and challenges in the…

  1. Study on thermocouple attachment in reflood experiments

    Sugimoto, Jun

    1977-03-01

    The method of thermocouple attachment to a heater rods has been studied for surface temperature measurement in reflood experiments. The method used as far in JAERI's reflood experiments had some possibilities of not estimating exactly the quench times. Various attachment method have been tested and some proved to be effective in the respect. (auth.)

  2. The role of time in place attachment

    David Smaldone

    2007-01-01

    Quantitative studies have found that the length of association is an important variable affecting place attachment (Kaltenborn 1998, Moore & Graefe 1994, Patterson & Williams 1991, Vorkinn & Riese 2001). These studies, however, have provided less insight into how and why time is involved in the process of forming place attachment, as well as the meanings...

  3. Internal Representational Models of Attachment Relationships.

    Crittenden, Patricia M.

    This paper outlines several properties of internal representational models (IRMs) and offers terminology that may help to differentiate the models. Properties of IRMs include focus, memory systems, content, cognitive function, "metastructure," quality of attachment, behavioral strategies, and attitude toward attachment. An IRM focuses on…

  4. Attachment of Salmonella spp. to pork meat

    Hansen, Trine; Riber, Leise; Löfström, Charlotta

    2011-01-01

    Five strains of Salmonella, one wildtype and four knock-out mutants (the prg, flhDC, yhjH and fliC genes) were investigated based on their probability to attach and subsequently detach from a surface of pork fillet. The attachment followed by detachment was measured and modelled for two different...

  5. Attachment Theory and Neuroscience for Care Managers.

    Blakely, Thomas J; Dziadosz, Gregory M

    2016-09-01

    This article describes a model for care managers that is based on attachment theory supplemented by knowledge from neuroscience. Together, attachment theory and basic knowledge from neuroscience provide for both an organizing conceptual framework and a scientific, measureable approach to assessment and planning interventions in a care plan.

  6. Attachment in young children with incarcerated fathers.

    Poehlmann-Tynan, Julie; Burnson, Cynthia; Runion, Hilary; Weymouth, Lindsay A

    2017-05-01

    The present study examined young children's attachment behaviors during paternal incarceration and reported on initial validity of a new measure used to rate children's attachment-related behaviors and emotions during visits in a corrections setting. Seventy-seven children, age 2 to 6 years, and their jailed fathers and current caregivers participated in the home visit portion of the study, whereas 28 of these children participated in the jail visit. The results indicated that 27% of children witnessed the father's crime and 22% of children witnessed the father's arrest, with most children who witnessed these events exhibiting extreme distress; children who witnessed these events were more likely to have insecure attachments to their caregivers. Consistent with attachment theory and research, caregivers who exhibited more sensitivity and responsivity during interactions with children and those who provided more stimulating, responsive, learning-oriented home environments had children who were more likely to have secure attachments (measured with the Attachment Q-Sort). We also found preliminary evidence for the validity of our new measure, the Jail Prison Observation Checklist, in that children's attachment-related behaviors and emotions during the jail visit correlated with their attachment security observed in the home. Our observations indicate that, in certain contexts, noncontact visits with incarcerated parents can be stressful for children and that children's caregivers may play a significant role during these visits.

  7. Insecure attachment and anxiety in student athletes.

    Han, D H; Kim, S M; Zaichkowsky, L

    2013-06-01

    The main purpose of our research was to examine attachment type and competition anxiety in high school student athletes and general high school students. We recruited 465 student athletes and 543 general students to participate in our study. The Revised Korean version of the Experiences in Close Relationships Scale (K-ECRS) and the Competitive State Anxiety Inventory-2 (CSAI-2) were given to all students. In χ2 tests, athletes showed attachment types in the following order of prevalence: fearful, dismissive, and preoccupied, compared to the fearful, preoccupied, and dismissive order observed in general students. In parametric, independent t-tests, athletes reported significantly higher cognitive anxiety scores, relative to general students. Further, athletes with insecure attachment compared to those with secure attachment reported higher cognitive anxiety scores and self-confidence scores. In both the athletes with insecure attachment and general students with insecure attachment groups, the K-ECRS anxiety subscale was significantly correlated with CSAI-2 total score. In post hoc analysis in the athletes with insecure attachment group, the K-ECRS anxiety subscale was also significantly correlated with the CSAI-2 cognitive anxiety subscale. These results suggest that anxious athletes with an insecure attachment style tend to exaggerate threats from both external and internal sources, which negatively affect their performances.

  8. Attachment Representations and Time Perspective in Adolescence

    Laghi, Fiorenzo; D'Alessio, Maria; Pallini, Susanna; Baiocco, Roberto

    2009-01-01

    This study examines the relationship between attachment to parents and peers, time perspective and psychological adjustment in adolescence. 2,665 adolescents (M age = 17.03 years, SD = 1.48) completed self-report measures about parent and peer attachment, time perspective, sympathy and self-determination. Subjects were divided into four groups…

  9. performance characteristics of a cam turning attachment

    Dr Obe

    ABSTRACT. A modification of a cylindrical turning unit has been done to give a non- cylindrical turning attachment for production of irregular shapes, like cams on the lathe machine. To assess the performance of the attachment, cutting forces have been measured using a 'Sigma' Cutting Tool. Dynamometer. Furthermore ...

  10. Adolescent Self-Esteem, Attachment and Loneliness

    Dhal, Anubha; Bhatia, Sangeeta; Sharma, Vidhi; Gupta, Priyanka

    2007-01-01

    Objectives: To assess self-esteem, loneliness and attachment styles among adolescents and examine their association with each other and with age and gender. Method: Adolescents (55 males and 55 females) from a public school in Delhi, aged 10-13 years were administered Coopersmith Self-Esteem Inventory (School Form), Attachment Scale and UCLA…

  11. Attachment Patterns in the Psychotherapy Relationship: Development of the Client Attachment to Therapist Scale.

    Mallinckrodt, Brent; And Others

    1995-01-01

    Describes development of an instrument, the Client Attachment to Therapist Scale (CATS). CATS factors correlated in expected directions with survey measures of object relations, client-rated working alliance, social self-efficacy, and adult attachment. Cluster analysis revealed four types of client attachment. Discusses implications of attachment…

  12. Attachment and children's biased attentional processing: evidence for the exclusion of attachment-related information.

    Eva Vandevivere

    Full Text Available Research in both infants and adults demonstrated that attachment expectations are associated with the attentional processing of attachment-related information. However, this research suffered from methodological issues and has not been validated across ages. Employing a more ecologically valid paradigm to measure attentional processes by virtue of eye tracking, the current study tested the defensive exclusion hypothesis in late childhood. According to this hypothesis, insecurely attached children are assumed to defensively exclude attachment-related information. We hypothesized that securely attached children process attachment- related neutral and emotional information in a more open manner compared to insecurely attached children. Sixty-two children (59.7% girls, 8-12 years completed two different tasks, while eye movements were recorded: task one presented an array of neutral faces including mother and unfamiliar women and task two presented the same with happy and angry faces. Results indicated that more securely attached children looked longer at mother's face regardless of the emotional expression. Also, they tend to have more maintained attention to mother's neutral face. Furthermore, more attachment avoidance was related to a reduced total viewing time of mother's neutral, happy, and angry face. Attachment anxiety was not consistently related to the processing of mother's face. Findings support the theoretical assumption that securely attached children have an open manner of processing all attachment-related information.

  13. Attachment and eating disorders: a research update.

    Tasca, Giorgio A

    2018-03-16

    Prominent models of eating disorders tend to focus on cognitive and behavioral features, but tend not to consider important developmental issues related to affect regulation, interpersonal style, self concept, and mentalization-all of which are well conceptualized within attachment theory. Higher levels of attachment insecurity across diagnoses are related to greater eating disorder symptoms. Low parental care and early trauma may lead to attachment insecurity that then might lead to greater eating disorder symptoms. The association between insecure attachment and eating disorder severity is likely mediated by affect dysregulation and perfectionism. Recent research using the Adult Attachment Interview highlights the importance of reflective functioning in predicting treatment response and therapeutic processes, and on the utility of therapies that increase mentalization. Copyright © 2018 Elsevier Ltd. All rights reserved.

  14. Developmental trajectories and longitudinal mediation effects of self-esteem, peer attachment, child maltreatment and depression on early adolescents.

    Ju, Soyoung; Lee, Yanghee

    2018-02-01

    The purpose of this study is to identify the developmental trajectories of peer attachment, self-esteem, depression, and child maltreatment, and to understand the longitudinal mediation effects that peer attachment and self-esteem have on the influence of perceived abuse on early adolescent depression. This study uses Year 1 to Year 5 data of the 4th grader panel of the Korea Youth Panel Survey (KYPS) and utilizes a multivariate latent growth model to analyze the main variables in the applicable data between 5th (i.e., Year 2) and 8th (i.e., Year 5) grades. The results indicate that from the 5th to the 8th grade, the degree of abuse and depression increases while self-esteem gradually decreases with slowly lowering peer attachment. A significant distribution of the initial values and the rate of change were present for all main variables of the study, confirming individual differences in time wise changes. Further, more exposure to abuse correlated with a decrease in self-esteem, while an increase in self-esteem greatly reduced depression. The initial value of self-esteem showed a partial mediation effect, whereas the rate of change indicated a full mediation effect with a significant longitudinal mediation effect. More experience of abuse during early adolescence indicated a lower degree of peer attachment, and a higher peer attachment was related to decreased depression. A significant partial mediation effect was present for both the initial value and the rate of change of peer attachment, and a longitudinal mediation effect was present. This study confirmed that self-esteem in early adolescents is an important protective factor that can greatly reduce the degree of depression, and suggests continuous interventions conducted to increase self-esteem in adolescence. Furthermore, by determining that peer attachment decreases the degree of depression in children at risk, the study emphasizes the healing aspect of adolescent peer attachment. Copyright © 2017 Elsevier

  15. The process of developing and changing of infant-teacher attachment : A study on an infant whose attachment to the first attachment figure is insecure

    上田, 七生

    2003-01-01

    Toward infants whose attachment to their first attachment figures (mainly their mothers) is insecure, how can we intervene in them? To reveal it, an observation was carried out regularly once a week, over a period of 9 months. The subjects were an infant who has insecure attachment and comparative one who has secure attachment. And the attachment behaviors they exhibited toward nursery school teachers, strangers, and an observer were counted. The amount of the attachment behaviors of the infa...

  16. El Salvador - Rural Electrification - Solar Panels

    Millennium Challenge Corporation — This is a summative qualitative performance evaluation (PE) of the solar panel component of the solar panel component of the RE Sub-Activity. The final report will...

  17. Installation package for concentrating solar collector panels

    1978-01-01

    The concentrating solar collector panels comprise a complete package array consisting of collector panels using modified Fresnel prismatic lenses for a 10 to 1 concentrating ratio, supporting framework, fluid manifolding and tracking drive system, and unassembled components for field erection.

  18. Retaining Ring Fastener for Solar Panels

    Wilson, A. H.

    1983-01-01

    Simple articulating linkage secures solar panels into supporting framework. Five element linkage collapses into W-shape for easy placement into framework, then expands to form rectangle of same dimensions as those of panel.

  19. Breastfeeding, Parenting, and Infant Attachment Behaviors.

    Gibbs, Benjamin G; Forste, Renata; Lybbert, Emily

    2018-04-01

    Objectives Infants and toddlers need secure attachments in order to develop the social competence required to successfully navigate later peer and adult relationships. Breastfeeding is a parenting factor that has been associated with child emotional development-specifically the attachment between children and their mothers. Yet, this link may simply be the result of other parenting behaviors that are associated with breastfeeding. Thus, our objective is to examine whether the link between infant attachment behaviors and breastfeeding endures when accounting for a broad array of in-depth measures of parenting. Methods We use the Early Childhood Longitudinal Study of children from 9 months to 2 years of age collected by the National Center for Education Statistics. Using Ordinary Least Squares regression, data analyses examine the association between the Toddler Attachment Sort-45 (TAS-45) measures of toddler-parent attachment (infant attachment security and temperamental dependency) and breastfeeding practices. We also examine individual items of the TAS-45 to isolate specific attachment behaviors that have the strongest associations with breastfeeding. Results We find an enduring link between children who are predominantly breastfed for six or more months and infant attachment security. However, we find no evidence that breastfeeding is linked to a child's temperamental dependency. Of the nine items used to examine infant attachment behaviors, we find that breastfed children are rated as having slightly higher scores on two measures ("warm and cuddly," "cooperative") and lower scores on one measure ("demanding/angry"). Conclusions for Practice Breastfeeding has an important link to the child's use of their caregiver as a secure base for exploration and a place of comfort when distressed (infant attachment security). Yet, breastfeeding does not appear to reduce a child's temperamental dependency or level of clinginess as measured by how demanding, fussy or

  20. The relation of infant attachment to attachment and cognitive and behavioural outcomes in early childhood.

    Ding, Yan-hua; Xu, Xiu; Wang, Zheng-yan; Li, Hui-rong; Wang, Wei-ping

    2014-09-01

    In China, research on the relation of mother-infant attachment to children's development is scarce. This study sought to investigate the relation of mother-infant attachment to attachment, cognitive and behavioural development in young children. This study used a longitudinal study design. The subjects included healthy infants (n=160) aged 12 to 18 months. Ainsworth's "Strange Situation Procedure" was used to evaluate mother-infant attachment types. The attachment Q-set (AQS) was used to evaluate the attachment between young children and their mothers. The Bayley scale of infant development-second edition (BSID-II) was used to evaluate cognitive developmental level in early childhood. Achenbach's child behaviour checklist (CBCL) for 2- to 3-year-olds was used to investigate behavioural problems. In total, 118 young children (73.8%) completed the follow-up; 89.7% of infants with secure attachment and 85.0% of infants with insecure attachment still demonstrated this type of attachment in early childhood (κ=0.738, pInfants with insecure attachment collectively exhibited a significantly lower mental development index (MDI) in early childhood than did infants with secure attachment, especially the resistant type. In addition, resistant infants were reported to have greater social withdrawal, sleep problems and aggressive behaviour in early childhood. There is a high consistency in attachment development from infancy to early childhood. Secure mother-infant attachment predicts a better cognitive and behavioural outcome; whereas insecure attachment, especially the resistant attachment, may lead to a lower cognitive level and greater behavioural problems in early childhood. Copyright © 2014 Elsevier Ltd. All rights reserved.

  1. PV panel model based on datasheet values

    Sera, Dezso; Teodorescu, Remus; Rodriguez, Pedro

    2007-01-01

    This work presents the construction of a model for a PV panel using the single-diode five-parameters model, based exclusively on data-sheet parameters. The model takes into account the series and parallel (shunt) resistance of the panel. The equivalent circuit and the basic equations of the PV cell....... Based on these equations, a PV panel model, which is able to predict the panel behavior in different temperature and irradiance conditions, is built and tested....

  2. Grounds of two positions photovoltaic panels

    Castán Fortuño, Fernando

    2008-01-01

    The objective of this Master Thesis is to find the optimum positioning for a two positions photovoltaic panel. Hence, it will be implemented a model in order to optimize the energy of the sun that the photovoltaic panel is receiving by its positioning. Likewise this project will include the comparison with other photovoltaic panel systems as the single position photovoltaics panels. Ultimately, it is also going to be designed a system array for the optimized model of two positions photovoltai...

  3. Control panel for CMC 8080 crate controller

    Masayuki Inokuchi

    1978-01-01

    The main features of Control Panel for CAMAC Crate Controller CMC 8080 are described. The control panel can be directly connected with CRATE CONTROLLER's front panel connector with a 50 lines cable without any changes in CMC 8080 system circuits. (author)

  4. 78 FR 63501 - Meetings of Humanities Panel

    2013-10-24

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: National Endowment for the Humanities. ACTION: Notice of meetings. SUMMARY: Pursuant to section 10(a)(2) of the... Humanities Panel will be held during November, 2013 as follows. The purpose of the meetings is for panel...

  5. 78 FR 74175 - Meetings of Humanities Panel

    2013-12-10

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: National Endowment for the Humanities. ACTION: Notice of meetings. SUMMARY: Pursuant to section 10(a)(2) of the... Humanities Panel will be held during January 2014 as follows. The purpose of the meetings is for panel review...

  6. Solar panel assembly and support pad

    Hawley, W.W.

    1980-10-07

    A solar panel assembly is described comprising at least one solar panel, support means for carrying said panel, and at least one support pad having a base plate, upstanding longitudinal sides, and spaced apart flange means for connection to said support means, said upstanding sides and opposed flange means defining an interior volume for receiving and holding weighting material.

  7. Flat panel planar optic display

    Veligdan, J.T. [Brookhaven National Lab., Upton, NY (United States). Dept. of Advanced Technology

    1994-11-01

    A prototype 10 inch flat panel Planar Optic Display, (POD), screen has been constructed and tested. This display screen is comprised of hundreds of planar optic class sheets bonded together with a cladding layer between each sheet where each glass sheet represents a vertical line of resolution. The display is 9 inches wide by 5 inches high and approximately 1 inch thick. A 3 milliwatt HeNe laser is used as the illumination source and a vector scanning technique is employed.

  8. Panel 4 - applications to transportation

    Nichols, F. [Argonne National Lab., IL (United States); Au, J. [Sundstrand Aerospace, Rockford, IL (United States); Bhattacharya, R. [Universal Energy Systems, Inc., Dayton, OH (United States); Bhushan, B. [Ohio State Univ., Columbus (United States); Blunier, D. [Caterpillar, Inc., Peoria, IL (United States); Boardman, B. [Deere & Co., Moline, IL (United States); Brombolich, L. [Compu-Tec Engineering, Chesterfield, MO (United States); Davidson, J. [Vanderbilt Univ., Nashville, TN (United States); Graham, M. [Northwestern Univ., Evanston, IL (United States); Hakim, N. [Detroit Diesel Corp., MI (United States); Harris, K. [Dubbeldee Harris Diamond Corp., Mt. Arlington, NJ (United States); Hay, R. [Norton Diamond Film, Northboro, MA (United States); Herk, L. [Southwest Research Inst., Southfield, MI (United States); Hojnacki, H.; Rourk, D. [Intelligent Structures Incorporated, Canton, MI (United States); Kamo, R. [Adiabatics, Inc., Columbus, IN (United States); Nieman, B. [Allied-Signal Inc., Des Plaines, IL (United States); O`Neill, D. [3M, St. Paul, MN (United States); Peterson, M.B. [Wear Sciences, Arnold, MD (United States); Pfaffenberger, G. [Allison Gas Turbine, Indianapolis, IN (United States); Pryor, R.W. [Wayne State Univ., Detroit, MI (United States); Russell, J. [Superconductivity Publications, Inc., Somerset, NJ (United States); Syniuta, W. [Advanced Mechanical Technology, Inc., Newton, MA (United States); Tamor, M. [Ford Motor Co., Dearborn, MI (United States); Vojnovich, T. [Dept. of Energy, Washington, DC (United States); Yarbrough, W. [Pennsylvania State Univ., University Park (United States); Yust, C.S. [Oak Ridge National Lab., TN (United States)

    1993-01-01

    The aim of this group was to compile a listing of current and anticipated future problem areas in the transportation industry where the properties of diamond and DLC films make them especially attractive and where the panel could strongly endorse the establishment of DOE/Transportation Industry cooperative research efforts. This section identifies the problem areas for possible applications of diamond/DLC technology and presents indications of current approaches to these problems.

  9. The attachment system in fledgling relationships: an activating role for attachment anxiety.

    Eastwick, Paul W; Finkel, Eli J

    2008-09-01

    Is it sensible to study attachment dynamics between potential romantic partners before they share a full-fledged attachment bond? The present data indicate that such an approach may reveal novel insights about initial attraction processes. Four studies suggest that the state-like experience of attachment anxiety has functional implications within fledgling (i.e., desired or undeveloped) romantic relationships, well before the formation of an attachment bond. Studies 1 and 3 reveal that attachment anxiety directed toward a particular romantic interest is elevated before (in comparison with after) participants report being in an established relationship. Studies 2 and 3 demonstrate that such partner-specific attachment anxiety predicts attachment-relevant outcomes in fledgling relationships, including proximity seeking, safe haven, secure base, passionate love, and other approach behaviors. These associations were reliable above and beyond (and were typically as strong as or stronger than) the effect of sexual desire. Finally, Study 4 presents evidence that partner-specific attachment anxiety may cause several of these attachment-relevant outcomes. Attachment anxiety seems to be a normative experience and may signal the activation of the attachment system during the earliest stages of romantic relationships.

  10. Comparisons between various cavity and panel noise reduction control in double-panel structures

    Ho, J.H.; Kalverboer, J.; Berkhoff, A.P.

    2012-01-01

    This paper presents comparisons between various panel and cavity resonance control methods to reduce the transmitted sound in a double-panel structure. The double-panel, which consists of two panels with air in the gap, has the advantages of low weight and effective transmission-loss at high

  11. Panel Resonance Control and Cavity Control in Double-Panel Structures for Active Noise Reduction

    Ho, J.; Berkhoff, Arthur P.

    2011-01-01

    An analytical and experimental investigation of panel resonance control and cavity control in a double-panel structure is presented in this paper. The double-panel structure, which consists of two panels with air in the gap, is widely adopted in many applications such as aerospace due to its low

  12. Noise Reduction in Double‿Panel Structures by Cavity and Panel Resonance Control

    Ho, J.; Berkhoff, Arthur P.

    2011-01-01

    This paper presents an investigation of the cavity and the panel resonance control in a double‿panel structure. The double‿panel structure, which consists of two panels with air in the gap, is widely adopted in many applications such as aerospace due to its light weight and effective

  13. Noise reduction in double-panel structures by cavity and panel resonance control

    Ho, J.-H.; Berkhoff, A.P

    2011-01-01

    This paper presents an investigation of the cavity and the panel resonance control in a double‐panel structure. The double‐panel structure, which consists of two panels with air in the gap, is widely adopted in many applications such as aerospace due to its light weight and effective

  14. Cavity Control and Panel Control Strategies in Double-Panel Structures for Transmitted Noise Reduction

    Ho, J.; Kalverboer, J.; Berkhoff, Arthur P.

    2012-01-01

    Investigation and comparisons of the cavity control and the panel control in a double-panel structure are presented in this paper. The double-panel structure, which comprises two panels with air in the gap, provides the advantages of low sound-transmission at high frequency, low heat-transmission

  15. Slides with no attached paper

    Warin, Dominique; Wallenius, Janne; Ouzounian, Gerald; Wikberg, Peter; Todd, Terry A.; Kormilitsyn, Mikhael V.; Osipenko, Alexander G.; Mayorshin, A.A.; McLachlan, Fiona; Nash, Ken L.; Nilsson, M.; Grimes, T.; Braley, J.C.; TAKESHITA, Kenji; Babain, Vasiliy A.; Spendlikova, I.; Distler, P.; John, J.; Sebesta, F.; VU, Trong-Hung; SIMONIN, Jean-Pierre; PAULENOVA, Alena; PRECEK, Martin; HARTIG, Kyle; KNAPP, Nathan; Vidick, Geoffrey; Bouslimani, Nouri; Desreux, Jean F.; Lewis, F.W.; Hudson, M.J.; Harwood, L.M.; Nunez, Ana; Nagarajan, K.; Vasudeva Rao, P.R.; Raj, Baldev; Ignatiev, Victor; Surenkov, Alexander; Pouchon, Manuel A.; Skarnemark, Gunnar; Allard, Stefan; Ekberg, Christian; Retegan, Teodora; Nordlund, Anders; John, Jan; Maershin, Alexander; Zakirov, R.; Panov, A.; Toropov, Andrey

    2010-01-01

    This document brings together the different presentations (slides) given at the workshop but with no attached paper. These slides refer to the following presentations: - Presentation of ITN (Instituto Tecnologico e Nuclear); - Minor Actinide Partitioning (Dominique Warin); - Transmutation (Janne Wallenius); - Radioactive Waste Management, IGD-TP (Gerald Ouzounian); - Present status of the Swedish nuclear waste management programme (Peter Wikberg); - The U.S. Fuel Cycle Research and Development Program - Separations Research and Development (Terry Todd); - Strategies and national programs of closed fuel cycles - Russian Expert Vision (Mikhael Kormilitsyn) - Extraction Studies Of Potential Solvent Formulations For The GANEX Process (Fiona MacLachlan); - Investigations of The Fundamental Chemistry of the TALSPEAK Process (Ken Nash); - Extraction Separation of Trivalent Minor Actinides and Lanthanides by Hexa-dentate Nitrogen-donor Extractant, TPEN, and its Analogs (Kenji Takeshita); - Fluorinated Diluents for HLW Processing - technological point of view (Vasiliy Babain); - Extraction properties of some new pyridine molecules and search for better diluents (Irena Spendlikova); - Kinetics of extraction of Eu 3+ ion by TODGA and CyMe 4 -BTBP studied using the RMC technique (Trong Hung Vu); - Redox Chemistry of Neptunium in Solutions of Nitric Acid (Alena Paulenova); - NMR applied to actinide ions and their complexes. In search of covalency effects (Geoffrey Vidick); - Towards 'Stability Rules' for Radiolysis of bis-DGA compounds (Ana Nunez); - Pyroprocess Research Activities at IGCAR, Kalpakkam, India (K. Nagarajan); - Critical issues of nuclear energy systems employing molten salt fluorides: from ISTC No. 1606 to No. 3749 (1. year of project activity) and MARS/EVOL cooperation (Victor Ignatiev); - Conversion processes: Internal Gelation and the Sphere-pac concept (Manuel Pouchon); - A Combined Nuclear Technology and Nuclear Chemistry Master. A Unique

  16. Solar panels for the International Space Station are uncrated and moved in the SSPF

    1998-01-01

    In the Space Station Processing Facility, a worker (left) guides the lifting of solar panels for the International Space Station (ISS). The panels are the first set of U.S.-provided solar arrays and batteries for ISS, scheduled to be part of mission STS-97 in December 1999. The mission, fifth in the U.S. flights for construction of ISS, will build and enhance the capabilities of the Space Station. It will deliver the solar panels as well as radiators to provide cooling. The Shuttle will spend 5 days docked to the station, which at that time will be staffed by the first station crew. Two space walks will be conducted to complete assembly operations while the arrays are attached and unfurled. A communications system for voice and telemetry also will be installed.

  17. Exergetic evaluation on photovoltaic/thermal hybrid panel; Taiyoko netsu hybrid panel no exergy hyoka

    Iwaki, H; Morita, Y; Fujisawa, T; Tani, T [Science University of Tokyo, Tokyo (Japan)

    1996-10-27

    The photovoltaic/thermal hybrid panel (PV/T) is an energy converter that was designed for the composite use of electricity and heat. In this paper, the validity of PV/T designed for trial was evaluated based on an exergetic theory. As the result of an experiment, the electric exergetic value of PV/T and PV is each 65.8 kWh/m{sup 2} and 58.6 kWh/m{sup 2}. The former is higher than the latter by 11.2%. The total exergetic value of PV/T is also 1.2 and 8.2 times as high as those of a PV and solar collector (SC), respectively. The calculation result of the optimum temperature operation showed that the exergetic value of PV/T is 3.1 times as high as the electric exergetic value. Therefore, the operation must be performed with the electric and thermal exergetic values set in a ratio of 3.1 to 1. In this paper, the operating mode is handled in which importance was more attached to the electric exergy than the thermal exergy. The flow rate of a heating medium on PV/T is not thus the flow control that maximizes the PV/T exergy. In the future, studies including these points will be promoted. 7 refs., 7 figs., 3 tabs.

  18. The fourth pattern of attachment: Disorganized / disoriented

    Zlatka Cugmas

    2003-09-01

    Full Text Available On the basis of the study of recent scientific literature about the development of attachment behavior, the author answers the following questions about: the behavior children categorized as Disorganized/disorientated or Controlling in the procedure of the Strange situation; the life circumstances, in which these children live; the reasons for lack of balanced strategies of attachment and characteristics of their general manner of adaptation. The author finds the characteristics of the mothers' (insensitivity to be significantly influential for the emergence of the fourth pattern of attachment. These children are heterogeneous regarding adaptation in general. Professional help preceding negative consequences for their socioemotional development is neccesary.

  19. Nuclear reactor fuel rod attachment system

    Christiansen, D.W.

    1983-01-01

    The invention involves a technique to quickly, inexpensively and rigidly attach a nuclear reactor fuel rod to a support member. The invention also allows for the repeated non-destructive removal and replacement of the fuel rod. The proposed fuel rod and support member attachment and removal system consists of a locking cap fastened to the fuel rod and a locking strip fastened to the support member or vice versa. The locking cap has two or more opposing fingers shaped to form a socket. The fingers spring back when moved apart and released. The locking strip has an extension shaped to rigidly attach to the socket's body portion

  20. Flat panel display - Impurity doping technology for flat panel displays

    Suzuki, Toshiharu [Advanced Technology Planning, Sumitomo Eaton Nova Corporation, SBS Tower 9F, 10-1, Yoga 4-chome, Setagaya-ku, 158-0097 Tokyo (Japan)]. E-mail: suzuki_tsh@senova.co.jp

    2005-08-01

    Features of the flat panel displays (FPDs) such as liquid crystal display (LCD) and organic light emitting diode (OLED) display, etc. using low temperature poly-Si (LTPS) thin film transistors (TFTs) are briefly reviewed comparing with other FPDs. The requirements for fabricating TFTs used for high performance FPDs and system on glass (SoG) are addressed. This paper focuses on the impurity doping technology, which is one of the key technologies together with crystallization by laser annealing, formation of high quality gate insulator and gate-insulator/poly-Si interface. The issues to be solved in impurity doping technology for state of the art and future TFTs are clarified.

  1. Flat panel display - Impurity doping technology for flat panel displays

    Suzuki, Toshiharu

    2005-01-01

    Features of the flat panel displays (FPDs) such as liquid crystal display (LCD) and organic light emitting diode (OLED) display, etc. using low temperature poly-Si (LTPS) thin film transistors (TFTs) are briefly reviewed comparing with other FPDs. The requirements for fabricating TFTs used for high performance FPDs and system on glass (SoG) are addressed. This paper focuses on the impurity doping technology, which is one of the key technologies together with crystallization by laser annealing, formation of high quality gate insulator and gate-insulator/poly-Si interface. The issues to be solved in impurity doping technology for state of the art and future TFTs are clarified

  2. High Efficiency, High Density Terrestrial Panel. [for solar cell modules

    Wohlgemuth, J.; Wihl, M.; Rosenfield, T.

    1979-01-01

    Terrestrial panels were fabricated using rectangular cells. Packing densities in excess of 90% with panel conversion efficiencies greater than 13% were obtained. Higher density panels can be produced on a cost competitive basis with the standard salami panels.

  3. [The interpretation of attachment in the Szondi test and in the questionnaire processes of attachment theory].

    Török I, András; Vincze, Gábor

    2011-01-01

    [corrected] The Szondi-test is widely applied in clinical diagnostics in Hungary too, and the evidence resulting from the theory is that we can get information about attachment during its interpreting. Its validity is proven by empirical research and clinical experiences. By analyzing the modern attachment theory more thoroughly, it becomes clear in what ways the Szondi-test constellations regarding attachment are different from the classificationbased on questionnaires, allowing the discrete measurement of the attachment style. With the Szondi-test the classification to attachment style is more insecure, but if it is completed with exploration, it is more informative in vector C (vector of relation, attachment information), while short questionnaires make the classification to attachment style possible. In our empirical analysis we represent the integration of the above mentioned clinical and theoretical experiences. In the present analysis we compare the vector C and S constellation of the two-profile Szondi-test of 80 persons with the dimensions of ECR-R questionnaire and with Collins and Read's questionnaire classification regarding attachment style. The statistical results refer to the fact that there is a legitimacy to compare questionnaire processes allowing the discrete classification of attachment and the Szondi-test's information content regarding attachment. With applying the methods together, we get a unique, complementary section of the information relating to attachment. Comparing the two methods (projective and questionnaire) establishes the need of theoretical integration as well. We also make an attempt to explain Fraley's evolutionary non-adaptivity of avoidant attachment, in the case of whose presence adaptivity of early attachment, counterbalancing the exploration and security need, and providing closeness--farness loses its balance.

  4. Magnetically Attached Multifunction Maintenance Rover

    Bar-Cohen, Yoseph; Joffe, Benjamin

    2005-01-01

    A versatile mobile telerobot, denoted the magnetically attached multifunction maintenance rover (MAGMER), has been proposed for use in the inspection and maintenance of the surfaces of ships, tanks containing petrochemicals, and other large ferromagnetic structures. As its name suggests, this robot would utilize magnetic attraction to adhere to a structure. As it moved along the surface of the structure, the MAGMER would perform tasks that could include close-up visual inspection by use of video cameras, various sensors, and/or removal of paint by water-jet blasting, laser heating, or induction heating. The water-jet nozzles would be mounted coaxially within compressed-air-powered venturi nozzles that would collect the paint debris dislodged by the jets. The MAGMER would be deployed, powered, and controlled from a truck, to which it would be connected by hoses for water, compressed air, and collection of debris and by cables for electric power and communication (see Figure 1). The operation of the MAGMER on a typical large structure would necessitate the use of long cables and hoses, which can be heavy. To reduce the load of the hoses and cables on the MAGMER and thereby ensure its ability to adhere to vertical and overhanging surfaces, the hoses and cables would be paid out through telescopic booms that would be parts of a MAGMER support system. The MAGMER would move by use of four motorized, steerable wheels, each of which would be mounted in an assembly that would include permanent magnets and four pole pieces (see Figure 2). The wheels would protrude from between the pole pieces by only about 3 mm, so that the gap between the pole pieces and the ferromagnetic surface would be just large enough to permit motion along the surface but not so large as to reduce the magnetic attraction excessively. In addition to the wheel assemblies, the MAGMER would include magnetic adherence enhancement fixtures, which would comprise arrays of permanent magnets and pole pieces

  5. Associations among Adult Attachment Presentations, Maternal Sensitivity, and Infant-Mother Attachment in a Sample of Adolescent Mothers.

    Ward, Mary J.; Carlson, Elizabeth A.

    1995-01-01

    Associations among adolescent attachment organization, maternal sensitivity, and infant attachment organization were examined prospectively in 72 teenaged mother-infant dyads. Pregnant teenagers' attachment organizations predicted both sensitivity and infant-mother attachments. Associations between maternal sensitivity and infant attachment were…

  6. Mycoplasma genitalium attaches to human spermatozoa

    Svenstrup, Helle Friis; Fedder, Jens; Abraham-Peskir, Joanna

    2003-01-01

    BACKGROUND: Mycoplasma genitalium causes urogenital diseases in men and women and is presumed to be sexually transmitted. We wanted to investigate whether spermatozoa could serve as vectors for M.genitalium in order to cause upper genital diseases in women. METHODS: By use of Nomarski light...... microscopy and transmission X-ray microscopy, the attachment of M.genitalium to spermatozoa was studied. Semen was incubated in vitro with M.genitalium. Purified, motile spermatozoa were examined for attachment of M.genitalium by immunofluorescence microscopy. RESULTS: Mycoplasma genitalium was shown...... to adhere to the head, midpiece and tail of the spermatozoa. The spermatozoa became immotile when many M.genitalium were attached. However, the motile spermatozoa were demonstrated to carry M.genitalium and in this case the mycoplasmas were seen to attach mostly to the midpiece or neck region. Occasionally...

  7. Preferential attachment in evolutionary earthquake networks

    Rezaei, Soghra; Moghaddasi, Hanieh; Darooneh, Amir Hossein

    2018-04-01

    Earthquakes as spatio-temporal complex systems have been recently studied using complex network theory. Seismic networks are dynamical networks due to addition of new seismic events over time leading to establishing new nodes and links to the network. Here we have constructed Iran and Italy seismic networks based on Hybrid Model and testified the preferential attachment hypothesis for the connection of new nodes which states that it is more probable for newly added nodes to join the highly connected nodes comparing to the less connected ones. We showed that the preferential attachment is present in the case of earthquakes network and the attachment rate has a linear relationship with node degree. We have also found the seismic passive points, the most probable points to be influenced by other seismic places, using their preferential attachment values.

  8. Cesarean Births and Attachment Behaviors of Fathers.

    1984-01-01

    knowledge about breastfeeding and maternal breastfeeding and attachment behaviors of a group of primiparous mothers on the first post - partum day...individuality of their infants and the attachment process can be promoted. Brazelton believes the opposite occurs with a depressed -q* infant. Commenting in...Maternal-Infant Bondin by Klaus and Kennell, Brazelton says, Certainly a depressed infant is less likely to be responsive either on initial contact or

  9. Can Obesity Cause Depression? A Pseudo-panel Analysis

    Hyungserk Ha

    2017-07-01

    Full Text Available Objectives The US ranks ninth in obesity in the world, and approximately 7% of US adults experience major depressive disorder. Social isolation due to the stigma attached to obesity might trigger depression. Methods This paper examined the impact of obesity on depression. To overcome the endogeneity problem, we constructed pseudopanel data using the Behavioral Risk Factor Surveillance System from 1997 to 2008. Results The results were robust, and body mass index (BMI was found to have a positive effect on depression days and the percentage of depressed individuals in the population. Conclusions We attempted to overcome the endogeneity problem by using a pseudo-panel approach and found that increases in the BMI increased depression days (or being depressed to a statistically significant extent, with a large effect size.

  10. Mir Environmental Effects Payload and Returned Mir Solar Panel Cleanliness

    Harvey, Gale A.; Humes, Donald H.; Kinard, William H.

    2000-01-01

    The MIR Environmental Effects Payload (MEEP) was attached to the Docking Module of the MIR space station for 18 months during calendar years 1996 and 1997 (March 1996, STS 76 to October 1997, STS 86). A solar panel array with more than 10 years space exposure was removed from the MIR core module in November 1997, and returned to Earth in January, 1998, STS 89. MEEP and the returned solar array are part of the International Space Station (ISS) Risk Mitigation Program. This space flight hardware has been inspected and studied by teams of space environmental effects (SEE) investigators for micrometeoroid and space debris effects, space exposure effects on materials, and electrical performance. This paper reports changes in cleanliness of parts of MEEP and the solar array due to the space exposures. Special attention is given to the extensive water soluble residues deposited on some of the flight hardware surfaces. Directionality of deposition and chemistry of these residues are discussed.

  11. Electrodynamic Dust Shield for Solar Panels on Mars

    Calle, C. I.; Buhler, C. R.; Mantovani, J. G.; Clements S.; Chen, A.; Mazumder, M. K.; Biris, A. S.; Nowicki, A. W.

    2004-01-01

    The Materials Adherence Experiment on the Mars Pathfinder mission measured an obscuration of the solar arrays due to dust deposition at a rate of about 0.2 8% per day. It was estimated that settling dust may cause degradation in performance of a solar panel of between 22% and 89% over the course of two years [1, 2]. These results were obtained without the presence of a global dust storm. Several types of adherence forces keep dust particles attached to surfaces. The most widely discussed adherence force is the electrostatic force. Laboratory experiments [3] as well as indirect evidence from the Wheel Abrasion Experiment on Pathfinder [4] indicate that it is very likely that the particles suspended in the Martian atmosphere are electrostatically charged.

  12. Attachment of Adolescents to Parents: Turkey Profile

    Turkan Dogan

    2016-12-01

    Full Text Available The present study aims to determine the attachment of adolescents to their parents according to geographical regions in Turkey and gender. The research group consisted of 6061 adolescents. With an age average of 15.53 years. The Inventory of Attachment to Parents and Friends- Brief Form (EABE was used as data acquisition tool. The results of the study indicated significant difference between the scores of students regarding the inventory of attachment to parents according to regions. Evaluating the findings regarding attachment to father and mother together, the findings were similar, and the attachment levels of adolescents in Middle Anatolia, Eastern Anatolia and Black Sea Region were found to be higher than the ones in other regions. This result may be related with socioeconomic, geographical and cultural structures of the regions. Examining the finding according to gender variable, the scores of male students are significantly lower than the scores of female students. As a result according to the data gained from a wide sample group; the main factors for the attachment of adolescents to their parents in Turkey are the geographical regions in Turkey and the gender. [Psikiyatride Guncel Yaklasimlar - Current Approaches in Psychiatry 2016; 8(4.000: 406-419

  13. Personality and Attachment in Transsexual Adults.

    Lingiardi, Vittorio; Giovanardi, Guido; Fortunato, Alexandro; Nassisi, Valentina; Speranza, Anna Maria

    2017-07-01

    The main aim of this study was to investigate the associations between personality features and attachment patterns in transsexual adults. We explored mental representations of attachment, assessed personality traits, and possible personality disorders. Forty-four individuals diagnosed with gender identity disorder (now gender dysphoria), 28 male-to-female and 16 female-to-male, were evaluated using the Shedler-Westen assessment procedure-200 (SWAP-200) to assess personality traits and disorders; the adult attachment interview was used to evaluate their attachment state-of-mind. With respect to attachment, our sample differed both from normative samples because of the high percentage of disorganized states of mind (50% of the sample), and from clinical samples for the conspicuous percentage of secure states of mind (37%). Furthermore, we found that only 16% of our sample presented a personality disorder, while 50% showed a high level of functioning according to the SWAP-200 scales. In order to find latent subgroups that shared personality characteristics, we performed a Q-factor analysis. Three personality clusters then emerged: Healthy Functioning (54% of the sample); Depressive/Introverted (32%) and Histrionic/Extroverted (14%). These data indicate that in terms of personality and attachment, GD individuals are a heterogeneous sample and show articulate and diverse types with regard to these constructs.

  14. Attachment of gaseous fission products to aerosols

    Skyrme, G.

    1985-01-01

    Accidents may occur in which the integrity of fuel cladding is breached and volatile fission products are released to the containment atmosphere. In order to assess the magnitude of the subsequent radiological hazard it is necessary to know the transport behaviour of such fission products. It is frequently assumed that the fission products remain in the gaseous phase. There is a possibility, however, that they may attach themselves to particles and hence substantially modify their transport properties. This paper provides a theoretical assessment of the conditions under which gaseous fission products may be attached to aerosol particles. Specific topics discussed are: the mass transfer of a gaseous fission product to an isolated aerosol particle in an infinite medium; the rate at which the concentration of fission products in the gas phase diminishes within a container as a result of deposition on a population of particles; and the distribution of deposited fission product between different particle sizes in a log-normal distribution. It is shown that, for a given mass, small particles are more efficient for fission product attachment, and that only small concentrations of such particles may be necessary to achieve rapid attachment. Conditions under which gaseous fission products are not attached to particles are also considered, viz, the competing processes of deposition onto the containment walls and onto aerosol particles, and the possibility of the removal of aerosols from the containment by various deposition processes, or agglomeration, before attachment takes place. (author)

  15. The relationship between attachment and cognitive development

    Tošić Milica

    2013-01-01

    Full Text Available Emotional and cognitive development of personality have mostly been explored independently in the history of psychology. However, in the last decades, there have been more and more frequent arguments in favour of the idea that the emotional relationship between the mother and the child in early childhood, through forming a secure or insecure attachment style, is to a certain extent linked to the cognitive development. For example, securely attached children, compared to the insecurely attached, have more frequent and longer episodes of symbolic play and are more advanced in the domain of language in early childhood. Securely attached children are also more efficient and persistent in solving problems. Before starting school, securely attached children understand better the feelings and beliefs of others, as well as the fact that these determine people’s behaviour, thus having an opportunity to understand and predict this behaviour better. In this paper, we will attempt to point out some of the mechanisms that are assumed to be mediators between the emotional and cognitive development. Namely, since it enables a more independent exploration of the surroundings, more quality social relations among children, higher self-esteem, better focus and more developed communicative skills, secure attachment might potentially be linked to the cognitive development. [Projekat Ministarstva nauke Republike Srbije, br. 179002

  16. Wait Up!: Attachment and Sovereign Power.

    Duschinsky, Robbie; Greco, Monica; Solomon, Judith

    2015-09-01

    Sociologists and feminist scholars have, over many decades, characterised attachment as a social construction that functions to support political and gender conservatism. We accept that attachment theory has seen use to these ends and consider recent deployments of attachment theory as justification for a minimal State within conservative political discourse in the UK since 2009. However, we contest that attachment is reducible to its discursive construction. We consider Judith Butler's depiction of the infant attached to an abusive caregiver as a foundation and parallel to the position of the adult citizen subjected to punitive cultural norms and political institutions. We develop and qualify Butler's account, drawing on the insights offered by the work of Lauren Berlant. We also return to Foucault's Psychiatric Power lectures, in which familial relations are situated as an island of sovereign power within the sea of modern disciplinary institutions. These reflections help advance analysis of three important issues: the social and political implications of attachment research; the relationship between disciplinary and sovereign power in the affective dynamic of subjection; and the political and ethical status of professional activity within the psy disciplines.

  17. Integrated application of combined cooling, heating and power poly-generation PV radiant panel system of zero energy buildings

    Yin, Baoquan

    2018-02-01

    A new type of combined cooling, heating and power of photovoltaic radiant panel (PV/R) module was proposed, and applied in the zero energy buildings in this paper. The energy system of this building is composed of PV/R module, low temperature difference terminal, energy storage, multi-source heat pump, energy balance control system. Radiant panel is attached on the backside of the PV module for cooling the PV, which is called PV/R module. During the daytime, the PV module was cooled down with the radiant panel, as the temperature coefficient influence, the power efficiency was increased by 8% to 14%, the radiant panel solar heat collecting efficiency was about 45%. Through the nocturnal radiant cooling, the PV/R cooling capacity could be 50 W/m2. For the multifunction energy device, the system shows the versatility during the heating, cooling and power used of building utilization all year round.

  18. Laboratory panel and radiometer calibration

    Deadman, AJ

    2011-07-01

    Full Text Available stream_source_info Griffith1_2011.pdf.txt stream_content_type text/plain stream_size 16659 Content-Encoding ISO-8859-1 stream_name Griffith1_2011.pdf.txt Content-Type text/plain; charset=ISO-8859-1 LABORATORY PANEL... of Land surface imaging through a ground reference standard test site?, on http://qa4eo.org/documentation.html, 2009. [2] K. J. Thome, D. L. Helder, D. Aaron, and J. D. Dewald, ?Landsat-5 TM and Landsat-7 ETM+ Absolute Radiometric Calibration Using...

  19. Attachment to the Romantic Partner and Sibling: Attachment Hierarchies of Twins and Non-Twin Siblings

    Sascha Schwarz

    2015-12-01

    Full Text Available Previous studies have shown that romantic partners and siblings are important attachment figures. This study compares the attachment to the romantic partner with the attachment to the sibling as a function of the participant’s sibling type among monozygotic (MZ twins, dizygotic (DZ twins, and non-twin (NT siblings. The results show that MZ twins prefer their sibling to their romantic partner whereas DZ twins are equally attached to their sibling and romantic partner. In contrast, NT siblings are more attached to their romantic partner compared to their sibling. These results indicate that genetic relatedness has profound impact on a person’s attachment hierarchy and the relative rank of the romantic partner and the sibling.

  20. Electron attachment rate constant measurement by photoemission electron attachment ion mobility spectrometry (PE-EA-IMS)

    Su, Desheng; Niu, Wenqi; Liu, Sheng; Shen, Chengyin; Huang, Chaoqun; Wang, Hongmei; Jiang, Haihe; Chu, Yannan

    2012-01-01

    Photoemission electron attachment ion mobility spectrometry (PE-EA-IMS), with a source of photoelectrons induced by vacuum ultraviolet radiation on a metal surface, has been developed to study electron attachment reaction at atmospheric pressure using nitrogen as the buffer gas. Based on the negative ion mobility spectra, the rate constants for electron attachment to tetrachloromethane and chloroform were measured at ambient temperature as a function of the average electron energy in the range from 0.29 to 0.96 eV. The experimental results are in good agreement with the data reported in the literature. - Highlights: ► Photoemission electron attachment ion mobility spectrometry (PE-EA-IMS) was developed to study electron attachment reaction. ► The rate constants of electron attachment to CCl 4 and CHCl 3 were determined. ► The present experimental results are in good agreement with the previously reported data.

  1. An experimental evaluation of the State Adult Attachment Measure: The Influence of Attachment Primes on the Content of State Attachment Representations

    Bosmans, Guy; Bowles, David, P.; Dewitte, Marieke; De Winter, Simon; Braet, Caroline

    2014-01-01

    Attachment theory predicts cross-contextual stability of attachment representations, but research findings are rather mixed. Recently, it has been suggested that these mixed findings reflect the existence of both state and trait attachment components. The development of the State Adult Attachment Measure (SAAM) has enabled an investigation of this hypothesis. The current study aimed to evaluate the extent to which the SAAM is a useful instrument for studying such state attachment hypotheses. ...

  2. Optimum design of composite panel with photovoltaic-thermo module. Absorbing effect of cooling panel; Hikari netsu fukugo panel no saiteki sekkei. Reikyaku panel no kyunetsu koka

    Sato, M; Kikuchi, S; Tani, T [Science University of Tokyo, Tokyo (Japan); Kadotani, K; Imaizumi, H [Komatsu Ltd., Tokyo (Japan)

    1996-10-27

    The composite panel with photovoltaic-thermo module becomes higher in energy-saving than the conventional air-conditioning system by the independent radiational heating and cooling effect obtained when the generating panel using a solar cell module is combined with the heating and cooling panel using a thermo-element module. The output of a solar cell module can be directly used because the solar cell module operates in AC. This paper reports the relation between the absorbed value and power consumption of the cooling panel, while paying attention to the cooling panel. The performance coefficient of the maximum absorbed value from an non-absorbing substance to a cooling panel is 2 to 3. Assume that the cooling panel during non-adiabatic operation is operated using a solar cell module of 800 W/m{sup 2} in solar intensity and 15% in conversion efficiency. The cooling-surface temperature difference is 12.12 K, and the maximum absorbed value of a non-absorbing substance to a cooling panel is 39.12 W/m{sup 2}. The absorbed value of the outer temperature to the cooling panel is 74.4 W/m{sup 2}, and each performance coefficient is 3.26 and 0.62. The absorbed value must be calculated for evaluation from the cooling-surface temperature difference measured directly from the cooling panel. 4 refs., 8 figs., 1 tab.

  3. 'Adoption and attachment theory' the attachment models of adoptive mothers and the revision of attachment patterns of their late-adopted children.

    Pace, C S; Zavattini, G C

    2011-01-01

    This study examined the attachment patterns of late-adopted children (aged 4-7) and their adoptive mothers during the first 7- to 8-month period after adoption and aimed to evaluate the effect of adoptive mothers' attachment security on the revision of the attachment patterns of their late-adopted children. We assessed attachment patterns in 20 adoptive dyads and 12 genetically related dyads at two different times: T1 (time 1) within 2 months of adoption and T2 (time 2) 6 months after T1. The children's behavioural attachment patterns were assessed using the Separation-Reunion Procedure and the children's representational (verbal) attachment patterns using the Manchester Child Attachment Story Task. The attachment models of the adoptive mothers were classified using the Adult Attachment Interview. We found that there was a significant enhancement of the late-adopted children's attachment security across the time period considered (P= 0.008). Moreover, all the late-adopted children who showed a change from insecurity to security had adoptive mothers with secure attachment models (P= 0.044). However, the matching between maternal attachment models and late-adopted children's attachment patterns (behaviours and representations) was not significant. Our data suggest that revision of the attachment patterns in the late-adopted children is possible but gradual, and that the adoptive mothers' attachment security makes it more likely to occur. © 2010 Blackwell Publishing Ltd.

  4. Concordance of attachment representations in preschool siblings assessed by the attachment story completion task

    Werner, Helene; Zahn, Salome; Titze, Karl; Walitza, Susanne; Zulauf Logoz, Marina

    2015-01-01

    Several studies have indicated only a modest concordance of attachment security in siblings in infancy. Until now, very little was known about the concordance of siblings’ attachment security beyond infancy, as assessed by the attachment story completion task. This cross-sectional study aims to examine the concordance of attachment representations of 38 first-born (4–7 years) and 38 second-born (3–5 years) siblings living in middle-class two-parent families. Personality factors and the level ...

  5. Childhood Attachment to Pets: Associations between Pet Attachment, Attitudes to Animals, Compassion, and Humane Behaviour

    Roxanne D. Hawkins

    2017-05-01

    Full Text Available Attachment to pets has an important role in children’s social, emotional, and cognitive development, mental health, well-being, and quality of life. This study examined associations between childhood attachment to pets and caring and friendship behaviour, compassion, and attitudes towards animals. This study also examined socio-demographic differences, particularly pet ownership and pet type. A self-report survey of over one thousand 7 to 12 year-olds in Scotland, UK, revealed that the majority of children are strongly attached to their pets, but attachment scores differ depending on pet type and child gender. Analysis revealed that attachment to pets is facilitated by compassion and caring and pet-directed friendship behaviours and that attachment to pets significantly predicts positive attitudes towards animals. The findings have implications for the promotion of prosocial and humane behaviour. Encouraging children to participate in pet care behaviour may promote attachment between children and their pet, which in turn may have a range of positive outcomes for both children (such as reduced aggression, better well-being, and quality of life and pets (such as humane treatment. This study enhances our understanding of childhood pet attachment and has implications for humane education and promoting secure emotional attachments in childhood.

  6. Photovoltaic solar panels of crystalline silicon: Characterization and separation.

    Dias, Pablo Ribeiro; Benevit, Mariana Gonçalves; Veit, Hugo Marcelo

    2016-03-01

    Photovoltaic panels have a limited lifespan and estimates show large amounts of solar modules will be discarded as electronic waste in a near future. In order to retrieve important raw materials, reduce production costs and environmental impacts, recycling such devices is important. Initially, this article investigates which silicon photovoltaic module's components are recyclable through their characterization using X-ray fluorescence, X-ray diffraction, energy dispersion spectroscopy and atomic absorption spectroscopy. Next, different separation methods are tested to favour further recycling processes. The glass was identified as soda-lime glass, the metallic filaments were identified as tin-lead coated copper, the panel cells were made of silicon and had silver filaments attached to it and the modules' frames were identified as aluminium, all of which are recyclable. Moreover, three different components segregation methods have been studied. Mechanical milling followed by sieving was able to separate silver from copper while chemical separation using sulphuric acid was able to detach the semiconductor material. A thermo gravimetric analysis was performed to evaluate the use of a pyrolysis step prior to the component's removal. The analysis showed all polymeric fractions present degrade at 500 °C. © The Author(s) 2016.

  7. An Airplane Design having a Wing with Fuselage Attached to Each Tip

    Spearman, Leroy M.

    2001-01-01

    This paper describes the conceptual design of an airplane having a low aspect ratio wing with fuselages that are attached to each wing tip. The concept is proposed for a high-capacity transport as an alternate to progressively increasing the size of a conventional transport design having a single fuselage with cantilevered wing panels attached to the sides and tail surfaces attached at the rear. Progressively increasing the size of conventional single body designs may lead to problems in some area's such as manufacturing, ground-handling and aerodynamic behavior. A limited review will be presented of some past work related to means of relieving some size constraints through the use of multiple bodies. Recent low-speed wind-tunnel tests have been made of models representative of the inboard-wing concept. These models have a low aspect ratio wing with a fuselage attached to each tip. Results from these tests, which included force measurements, surface pressure measurements, and wake surveys, will be presented herein.

  8. Solar-Panel Dust Accumulation and Cleanings

    2005-01-01

    Air-fall dust accumulates on the solar panels of NASA's Mars Exploration Rovers, reducing the amount of sunlight reaching the solar arrays. Pre-launch models predicted steady dust accumulation. However, the rovers have been blessed with occasional wind events that clear significant amounts of dust from the solar panels. This graph shows the effects of those panel-cleaning events on the amount of electricity generated by Spirit's solar panels. The horizontal scale is the number of Martian days (sols) after Spirit's Jan. 4, 2005, (Universal Time) landing on Mars. The vertical scale indicates output from the rover's solar panels as a fraction of the amount produced when the clean panels first opened. Note that the gradual declines are interrupted by occasional sharp increases, such as a dust-cleaning event on sol 420.

  9. Solar Panel Installations on Existing Structures

    Tim D. Sass; Pe; Leed

    2013-01-01

    The rising price of fossil fuels, government incentives and growing public aware-ness for the need to implement sustainable energy supplies has resulted in a large in-crease in solar panel installations across the country. For many sites the most eco-nomical solar panel installation uses existing, southerly facing rooftops. Adding solar panels to an existing roof typically means increased loads that must be borne by the building-s structural elements. The structural desig...

  10. Geothermal Technologies Program Blue Ribbon Panel Recommendations

    none,

    2011-06-17

    The Geothermal Technologies Program assembled a geothermal Blue Ribbon Panel on March 22-23, 2011 in Albuquerque, New Mexico for a guided discussion on the future of geothermal energy in the United States and the role of the DOE Program. The Geothermal Blue Ribbon Panel Report captures the discussions and recommendations of the experts. An addendum is available here: http://www.eere.energy.gov/geothermal/pdfs/gtp_blue_ribbon_panel_report_addendum10-2011.pdf

  11. Sound transmission loss of composite sandwich panels

    Zhou, Ran

    Light composite sandwich panels are increasingly used in automobiles, ships and aircraft, because of the advantages they offer of high strength-to-weight ratios. However, the acoustical properties of these light and stiff structures can be less desirable than those of equivalent metal panels. These undesirable properties can lead to high interior noise levels. A number of researchers have studied the acoustical properties of honeycomb and foam sandwich panels. Not much work, however, has been carried out on foam-filled honeycomb sandwich panels. In this dissertation, governing equations for the forced vibration of asymmetric sandwich panels are developed. An analytical expression for modal densities of symmetric sandwich panels is derived from a sixth-order governing equation. A boundary element analysis model for the sound transmission loss of symmetric sandwich panels is proposed. Measurements of the modal density, total loss factor, radiation loss factor, and sound transmission loss of foam-filled honeycomb sandwich panels with different configurations and thicknesses are presented. Comparisons between the predicted sound transmission loss values obtained from wave impedance analysis, statistical energy analysis, boundary element analysis, and experimental values are presented. The wave impedance analysis model provides accurate predictions of sound transmission loss for the thin foam-filled honeycomb sandwich panels at frequencies above their first resonance frequencies. The predictions from the statistical energy analysis model are in better agreement with the experimental transmission loss values of the sandwich panels when the measured radiation loss factor values near coincidence are used instead of the theoretical values for single-layer panels. The proposed boundary element analysis model provides more accurate predictions of sound transmission loss for the thick foam-filled honeycomb sandwich panels than either the wave impedance analysis model or the

  12. Case Study - Monitoring the Photovoltaic Panels

    PACURAR Ana Talida; TOADER Dumitru; PACURAR Cristian

    2014-01-01

    The photovoltaic cell represents one of the most dynamic and attractive way to converts renewable energy sources in electricity production. That means to convert solar energy into electricity. In this paper is presented a analogy between two types of photovoltaic panels installed, with educational role for students. Also the objective of this paper is to estimate the performance of photovoltaic panels and to provide the best solution for industry. These two types of photovoltaic panels wer...

  13. Growing networks with mixed attachment mechanisms

    Shao Zhigang; Zou Xianwu; Tan Zhijie; Jin Zhunzhi

    2006-01-01

    Networks grow and evolve when new nodes and links are added in. There are two methods to add the links: uniform attachment and preferential attachment. We take account of the addition of links with mixed attachment between uniform attachment and preferential attachment in proportion. By using numerical simulations and analysis based on a continuum theory, we obtain that the degree distribution P(k) has an extended power-law form P(k) ∼ (k + k 0 ) -γ . When the number of edges k of a node is much larger than a certain value k 0 , the degree distribution reduces to the power-law form P(k) ∼ k -γ ; and when k is much smaller than k 0 , the degree distribution degenerates into the exponential form P(k)∼exp(-yk/k 0 ). It has been found that degree distribution possesses this extended power-law form for many real networks, such as the movie actor network, the citation network of scientific papers and diverse protein interaction networks

  14. Laser enhanced attachment in diffuse discharges

    Giesselmann, M.; Pashaie, B.; Kristiansen, M.; Schaefer, G.

    1987-01-01

    Measurements of the effect of laser enhanced attachment on externally sustained diffuse discharges are reported. Optical control of diffuse discharges is a promising way of upgrading the performance of e-beam controlled opening switches for repetitive operation. Ideal gases should exhibit a negligible attachment cross section for low E/N values (switch closed) in the ground state and strong attaching properties upon optical excitation in an E/N range between the conducting state and self breakdown of the switch. The ratio of resistivity change in these experiments is much higher than in previous investigations. In this investigation the attachment rate of an electronegative gas component, representing approximately 1% of the gas in the discharge volume, was increased by means of vibrational excitation with a pulsed IR-laser beam. Molecules exhibiting a strongly increased attachment rate upon IR-excitation are vinyl-chloride, vinyl flouride and trifluoroethylene, which has been verified in preliminary experiments. All experiments reported were performed with vinyl chloride and trifluoroethylene

  15. Uncertainties in predicting solar panel power output

    Anspaugh, B.

    1974-01-01

    The problem of calculating solar panel power output at launch and during a space mission is considered. The major sources of uncertainty and error in predicting the post launch electrical performance of the panel are considered. A general discussion of error analysis is given. Examples of uncertainty calculations are included. A general method of calculating the effect on the panel of various degrading environments is presented, with references supplied for specific methods. A technique for sizing a solar panel for a required mission power profile is developed.

  16. Orbiter radiator panel solar focusing test

    Howell, H. R.; Rankin, J. G.

    1983-01-01

    Test data are presented which define the area around the Orbiter radiator panels for which the solar reflections are concentrated to one-sun or more. The concave shape of the panels and their specular silver/Teflon coating causes focusing of the reflected solar energy which could have adverse heating effects on equipment or astronaut extravehicular activity (EVA) in the vicinity of the radiator panels. A room ambient test method was utilized with a one-tenth scale model of the radiator panels.

  17. Interagency Security Classification Appeals Panel (ISCAP) Decisions

    National Archives and Records Administration — This online collection includes documents decided upon by the Interagency Security Classification Appeals Panel (ISCAP) starting in Fiscal Year 2012. The documents...

  18. Development of Electrostatically Clean Solar Array Panels

    Stern, Theodore G.

    2000-01-01

    Certain missions require Electrostatically Clean Solar Array (ECSA) panels to establish a favorable environment for the operation of sensitive scientific instruments. The objective of this program was to demonstrate the feasibility of an ECSA panel that minimizes panel surface potential below 100mV in LEO and GEO charged particle environments, prevents exposure of solar cell voltage and panel insulating surfaces to the ambient environment, and provides an equipotential, grounded structure surrounding the entire panel. An ECSA panel design was developed that uses a Front Side Aperture-Shield (FSA) that covers all inter-cell areas with a single graphite composite laminate, composite edge clips for connecting the FSA to the panel substrate, and built-in tabs that interconnect the FSA to conductive coated coverglasses using a conductive adhesive. Analysis indicated the ability of the design to meet the ECSA requirements. Qualification coupons and a 0.5m x 0.5m prototype panel were fabricated and tested for photovoltaic performance and electrical grounding before and after exposure to acoustic and thermal cycling environments. The results show the feasibility of achieving electrostatic cleanliness with a small penalty in mass, photovoltaic performance and cost, with a design is structurally robust and compatible with a wide range of current solar panel technologies.

  19. Father attachment, father emotion expression, and children's attachment to fathers: The role of marital conflict.

    Bi, Shuang; Haak, Eric A; Gilbert, Lauren R; El-Sheikh, Mona; Keller, Peggy S

    2018-06-01

    The current study examined relations between father attachment to spouses and child attachment to fathers in middle childhood, focusing on father emotion expressions in father-child interactions as mediators and marital conflict as a moderator of relations. Participants were 199 children between 6 and 12 years of age and their fathers. Fathers completed questionnaires about their attachment to their spouses, and both fathers and mothers reported on their marital conflict. Fathers also discussed a difficult topic with their children for 5 min, and fathers' positive and negative emotion expression during the discussions were coded. Children completed questionnaires through an interview about their attachment to their father. Father insecure attachment interacted with marital conflict in predicting more negative emotions and less positive emotions during father-child interactions. Specifically, in the context of higher marital conflict in this community sample, fathers who reported greater preoccupied attachment to their spouses exhibited more negative emotions and less positive emotions when interacting with their children. In turn, more father negative emotions and less positive emotions were associated with children's less secure attachment to fathers. In contrast, father fearful attachment interacted with marital conflict to predict less negative emotion and more positive emotion during interactions with children. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

  20. ATTACHMENT, RELATIONAL-NEEDS, AND PSYCHOTHERAPEUTIC PRESENCE

    Richard G. Erskine

    2012-09-01

    Full Text Available Humans require the contactful presence of another person who is attuned and responsive to relational-needs. Insecure attachment patterns are the result of repeated disruptions in significant relationships. This article describes eight relational-needs that, when repeatedly unsatisfied, lead to insecure attachment patterns based on the fears of loss of relationship, vulnerability, violation, and invasion.The healing of insecure attachment patterns occurs through a contactful psychotherapeutic presence that occurs when the attitude, behavior and communication of the psychotherapist consistently respects and enhances the client's integrity while responding to relational-needs. The article is the Keynote Address given at the 5th International Integrative Psychotherapy Association Conference in Vichy, France, April 21, 2011.

  1. Laser illuminated flat panel display

    Veligdan, J.T.

    1995-12-31

    A 10 inch laser illuminated flat panel Planar Optic Display (POD) screen has been constructed and tested. This POD screen technology is an entirely new concept in display technology. Although the initial display is flat and made of glass, this technology lends itself to applications where a plastic display might be wrapped around the viewer. The display screen is comprised of hundreds of planar optical waveguides where each glass waveguide represents a vertical line of resolution. A black cladding layer, having a lower index of refraction, is placed between each waveguide layer. Since the cladding makes the screen surface black, the contrast is high. The prototype display is 9 inches wide by 5 inches high and approximately I inch thick. A 3 milliwatt HeNe laser is used as the illumination source and a vector scanning technique is employed.

  2. Microclimate boxes for panel paintings

    Wadum, Jørgen

    1998-01-01

    The use of microclimate boxes to protect vulnerable panel paintings is, therefore, not a new phenomenon of the past two or three decades. Rather, it has been a concern for conservators and curators to protect these objects of art at home and in transit since the end of the nineteenth century....... The increased number of travelling exhibitions in recent years has heightened the need to protect paintings during circulation (Thomson 1961; Mecklenburg 1991). The use and design of microclimate boxes have been evolving since 1892. These boxes may be divided into three broad groups: those using an active...... buffer material to stabilize the internal RH, a more recent box containing no added buffer material, and, in recent times, boxes with an altered gas content. Another concern is the appearance (aesthetics) of the box....

  3. Attachment at (not to) work: applying attachment theory to explain individual behavior in organizations.

    Richards, David A; Schat, Aaron C H

    2011-01-01

    In this article, we report the results of 2 studies that were conducted to investigate whether adult attachment theory explains employee behavior at work. In the first study, we examined the structure of a measure of adult attachment and its relations with measures of trait affectivity and the Big Five. In the second study, we examined the relations between dimensions of attachment and emotion regulation behaviors, turnover intentions, and supervisory reports of counterproductive work behavior and organizational citizenship behavior. Results showed that anxiety and avoidance represent 2 higher order dimensions of attachment that predicted these criteria (except for counterproductive work behavior) after controlling for individual difference variables and organizational commitment. The implications of these results for the study of attachment at work are discussed.

  4. Attachment relationships shape pain-signaling behavior.

    Kozlowska, Kasia

    2009-10-01

    Attachment relationships shape the manner in which children signal pain to others. Open communication of pain affect, inhibition of pain affect, and exaggeration of pain affect, reflect adaptations to different relationship contexts. The open and direct signaling of pain is adaptive in sensitive relationship contexts where caregivers respond to the distressed child with behaviors that facilitate protection, recovery, and healing. Inhibition of pain signals has survival advantages in situations where the open expressions of pain elicit negative parental responses (absence of caregiving, withdrawal from the child, or frank displeasure or anger). Exaggerated pain signaling functions as a means to elicit a caregiving response from preoccupied, inattentive, or neglectful attachment figures. This paper considers how a child's developmental experiences-specifically, the repeating person-specific experiences which make up attachment relationships-produce individual differences in the manner in which pain is experienced and signaled. This article reviews recent advances in our understanding of child development as articulated by contemporary attachment theory-in particular, the dynamic-maturational model (DMM)-and discusses their implications for interpreting human pain, pain-signaling behavior, and medically unexplained pain. The development of the experience of pain, along with ways of signaling pain, is tied to familial relationships generally and, in particular, to the manner in which attachment relationships shape the infant's behavior and physiology, thereby regulating the experience of pain. In explaining how the child's early attachment relationships produce individual differences in the way that she learns to experience and signal pain, the article provides an innovative perspective that is helpful in understanding the wide variations in patients' experience and presentation of pain, in elaborating formulations of medically unexplained pain, and in planning

  5. Adolescent attachment, family functioning and depressive symptoms

    Nishola Rawatlal

    2015-08-01

    Full Text Available Background. Adolescence represents a challenging transitional period where changes in biological, emotional, cognitive and social domains can increase the risk of developing internalised problems including subthreshold depression. Adolescent-parent attachment style, perceived support and family functioning may increase risk for depressive symptoms or may reduce such risk. Adolescent-parent attachment, adolescent-perceived support from parents and family functioning were examined as correlates of depressive symptom presentation within this age group. Methods. Participants included a maternal parent and an adolescent (65.5% female from each family. Adolescents were in Grade 7 (n=175 or Grade 10 (n=31. Data were collected through home interviews. The Self-Report of Family Inventory (SFI, Experiences of Close Relationships Scale (ECR, Network of Relationships Inventory (NRI, Children’s Depression Inventory (CDI and Child Behavior Checklist (CBCL were used to assess depression, parental support and attachment.  Results. Two models were examined: one with adolescent report of depressive symptoms as the outcome and a second with parent report of adolescent internalising symptoms as the outcome. The model predicting adolescent-reported depressive symptoms was significant with older age, higher levels of avoidant attachment, and higher levels of youth-reported dysfunctional family interaction associated with more depressive symptomatology. In the model predicting parent report of adolescent internalising symptoms only higher levels of dysfunctional family interaction, as reported by the parent, were associated with higher levels of internalising symptoms. Conclusion. Positive family communication, cohesion and support predictive of a secure parent-adolescent attachment relationship reduced the risk of a depressive symptom outcome. Secure adolescents were able to regulate their emotions, knowing that they could seek out secure base attachment relations

  6. 14 CFR 33.23 - Engine mounting attachments and structure.

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Engine mounting attachments and structure... mounting attachments and structure. (a) The maximum allowable limit and ultimate loads for engine mounting attachments and related engine structure must be specified. (b) The engine mounting attachments and related...

  7. Effects of Emotion Regulation Training on Attachment Style of Primiparous Pregnant Women with Insecure Attachment

    Tayebeh Reyhani

    2016-04-01

    Full Text Available Background: Pregnant women with insecure attachment style are at high risk of psychiatric disorders. Since emotions are the first coordinators of attachment behavior, emotion regulation training can alter maternal attachment style. In this study, we aimed to evaluate the effects of emotion regulation training on the attachment styles of primiparous pregnant women with insecure attachment style. Aim: This study aimed to evaluate the effects of training programs on the headache of patients after spinal anesthesia. Method: This randomized, clinical trial on 40 primiparous pregnant women with age range of 30-34 years, who were referred to healthcare centers of Mashhad, Iran, during 2014. The data collection instrument was Revised Adult Attachment Scale (RAAS. The participants were assigned to intervention and control groups. A training program was implemented on emotion regulation based on dialectical behavior therapy (DBT for the intervention group. After delivery, RAAS was completed by the mothers again. The control group only received the routine care. To analyze the data, Chi-square and independent t-test were run using SPSS, version 15. Results: Mean ages of the mothers in the intervention and control groups were 26.9±4.04 and 27.5±3.5 years, respectively. According to the results of independent t-test, the difference between the groups was non-significant (P=0.77. The groups were analogous in terms of attachment style pre-intervention. After the intervention, independent t-test did not reflect any significant differences between the groups regarding avoidant (P=0.37 and anxious (P=0.11 attachment styles. However, mean score for secure attachment style was significantly enhanced (P=0.01. Implications for Practice: Our findings revealed that implementation of emotion regulation training increased secure attachment scores. Thus, implementing emotion regulation training program is recommended as part of a program for pre-natal care in healthcare

  8. Clinical decision - making review on magnetic attachments versus mechanical attachments in dental prosthetics

    Francesca Fabiano

    2017-11-01

    Full Text Available Background Conventional dentures in edentulous patients show some limitations due to the lack of retention, support and stability thus resulting in difficulty to chew. The modern implantology allows to use different implant overdentures and different attachment systems. The selection of the attachment by practitioners is mainly influenced by the clinical experience or technical preferences. Aims The aim of the present review is to provide an adequate background to the clinicians, in order to select the prosthetic attachments according to the current literature. The mechanical attachments have been compared to the magnetic devices, with the aim to guide the decision of the practitioners. Methods Articles topics selection was based on the use of magnetic attachments in dentistry and the comparison between them and mechanical connectors. The databases used were PubMed/MEDLINE, Google Scholar and ISI Web of Science. A critical evaluation of the selected paper has been made to choose the ones that matched the inclusion criteria. Results Nowadays, few studies have compared different attachments in a manner useful for clinical decision-making. The main problem limiting long-term durability of magnetic attachments in the oral fluid is the poor corrosion resistance of permanent magnets and the consequent leaching of cytotoxic ions. Conclusion Magnetic attachments in comparison with other attaching systems can be useful in patients with special needs, in patients with limited interocclusal space, or in patients with neuromuscular limitations, thanks to the automatic reseating properties. However, it’s important to highlight that the mechanical attachments still represent the best choice in common conditions requiring dental prostheses.

  9. Understanding Members’ Attachment to Social Networking Sites

    Lim, Eric T. K.; Cyr, Dianne; Tan, Chee-Wee

    2014-01-01

    Social Networking Sites (SNSs) are pervasive phenomena in today’s society. With greater connectivity and interactivity enabled through emerging technologies, SNSs provide communication platforms for individuals to bridge spatial and temporal differences when making friends, sharing experiences......, socializing with others and much more. This study therefore endeavors to shed light on this growing trend by decomposing members’ motives for participating within SNSs into identity-based, bondbased and comparison-based attachments. Each of these forms of attachment in turn affects members’ cooperative...

  10. Attachment patterns and Mentalization in Traumatized Refugees

    Riber, Karin

    Poster Titel: Proces-præsentation: Tilknytningsmønstre og Refleksiv Funktion hos Traumatiserede Flygtninge. Introduktion. Gennem de senere år har empirisk forskning dokumenteret tilknytningsmønstre som en central variabel, der påvirker proces og effekt i psykologisk behandling på vigtige måder...... nærværende projekt bestod af de patienter i moderforsøget, som var arabisktalende (N=68). Måleredskaber består i The Adult Attachment Interview, The Reflective Functioning Scale, Revised Adult Attachment Scale, Working Alliance Inventory og Feeling Word Checklist-58. PTSD, depressions- og angstsymptomer...

  11. Pilot cryo tunnel: Attachments, seals, and insulation

    Wilson, J. F.; Ware, G. D.; Ramsey, J. W., Jr.

    1974-01-01

    Several different tests are described which simulated the actual configuration of a cryogenic wind tunnel operating at pressures up to 5 atmospheres (507 kPa) and temperatures from -320 F (78K) to 120 F (322K) in order to determine compatible bolting, adequate sealing, and effective insulating materials. The evaluation of flange attachments (continuous threaded studs) considered bolting based on compatible flanges, attachment materials, and prescribed bolt elongations. Various types of seals and seal configurations were studied to determine suitability and reusability under the imposed pressure and temperature loadings. The temperature profile was established for several materials used for structural supports.

  12. Lightning attachment process to common buildings

    Saba, M. M. F.; Paiva, A. R.; Schumann, C.; Ferro, M. A. S.; Naccarato, K. P.; Silva, J. C. O.; Siqueira, F. V. C.; Custódio, D. M.

    2017-05-01

    The physical mechanism of lightning attachment to grounded structures is one of the most important issues in lightning physics research, and it is the basis for the design of the lightning protection systems. Most of what is known about the attachment process comes from leader propagation models that are mostly based on laboratory observations of long electrical discharges or from observations of lightning attachment to tall structures. In this paper we use high-speed videos to analyze the attachment process of downward lightning flashes to an ordinary residential building. For the first time, we present characteristics of the attachment process to common structures that are present in almost every city (in this case, two buildings under 60 m in São Paulo City, Brazil). Parameters like striking distance and connecting leaders speed, largely used in lightning attachment models and in lightning protection standards, are revealed in this work.Plain Language SummarySince the time of Benjamin Franklin, no one has ever recorded high-speed video images of a lightning connection to a common building. It is very difficult to do it. Cameras need to be very close to the structure chosen to be observed, and long observation time is required to register one lightning strike to that particular structure. Models and theories used to determine the zone of protection of a lightning rod have been developed, but they all suffer from the lack of field data. The submitted manuscript provides results from high-speed video observations of lightning attachment to low buildings that are commonly found in almost every populated area around the world. The proximity of the camera and the high frame rate allowed us to see interesting details that will improve the understanding of the attachment process and, consequently, the models and theories used by lightning protection standards. This paper also presents spectacular images and videos of lightning flashes connecting lightning rods that

  13. Attachment styles and contingencies of self-worth.

    Park, Lora E; Crocker, Jennifer; Mickelson, Kristin D

    2004-10-01

    Previous research on attachment theory has focused on mean differences in level of self-esteem among people with different attachment styles. The present study examines the associations between attachment styles and different bases of self-esteem, or contingencies of self-worth, among a sample of 795 college students. Results showed that attachment security was related to basing self-worth on family support. Both the preoccupied attachment style and fearful attachment style were related to basing self-worth on physical attractiveness. The dismissing attachment style was related to basing self-worth less on others' approval, family support, and God's love.

  14. Touch panel system for control applications

    Crook, K.; Johnson, R.

    1976-12-01

    The use of finger-sensitive touch panels in association with computer-generated displays for control and monitoring of the Stanford linear accelerator is discussed. This control concept has proven to be very effective. The hardware and software aspects of the Touch Panel portion of the control system are described

  15. Electronic unit for fotovoltaic solar panelling validation

    Vazquez, J.; Valverde, J.; Garcia, J.M.

    1988-01-01

    A low cost and easy to use electronic system for photovoltaic solar panelling validation is described. It measures, with a certain periodicity, voltage and current given by the panel, determines the supplied power, and every so often, its maximum valves. The unit is fitted with a data storage system which allows data recording for later analysis. (Author)

  16. Outgassing tests on iras solar panel samples

    Premat, G.; Zwaal, A.; Pennings, N. H.

    1980-01-01

    Several outgassing tests were carried out on representative solar panel samples in order to determine the extent of contamination that could be expected from this source. The materials for the construction of the solar panels were selected as a result of contamination obtained in micro volatile condensable materials tests.

  17. 49 CFR 845.22 - Technical panel.

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Technical panel. 845.22 Section 845.22... Technical panel. The Director, Bureau of Accident Investigation, or the Director, Bureau of Field Operations, shall designate members of the Board's technical staff to participate in the hearing and initially...

  18. Dynamic spatial panels : models, methods, and inferences

    Elhorst, J. Paul

    This paper provides a survey of the existing literature on the specification and estimation of dynamic spatial panel data models, a collection of models for spatial panels extended to include one or more of the following variables and/or error terms: a dependent variable lagged in time, a dependent

  19. 78 FR 74174 - Humanities Panel Advisory Committee

    2013-12-10

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Humanities Panel Advisory Committee AGENCY: National Endowment for the Humanities. ACTION: Notice of Charter Renewal for Humanities Panel Advisory... its implementing regulations, 41 CFR 102-3.65, the National Endowment for the Humanities (NEH) gives...

  20. 76 FR 6828 - Meetings of Humanities Panel

    2011-02-08

    ... THE NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The National Endowment for the Humanities. ACTION: Notice of Meetings. SUMMARY: Pursuant to the provisions of... following meetings of Humanities Panels will be held at the Old Post Office, 1100 Pennsylvania Avenue, NW...

  1. 75 FR 18906 - Meetings of Humanities Panel

    2010-04-13

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The National Endowment for the Humanities. ACTION: Notice of Meetings. SUMMARY: Pursuant to the provisions of... following meetings of Humanities Panels will be held at the Old Post Office, 1100 Pennsylvania Avenue, NW...

  2. 76 FR 14434 - Meetings of Humanities Panel

    2011-03-16

    ... THE NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The National Endowment for the Humanities, National Foundation on the Arts and the Humanities. ACTION: Notice...-463, as amended), notice is hereby given that the following meetings of Humanities Panels will be held...

  3. 75 FR 50007 - Meetings of Humanities Panel

    2010-08-16

    ... THE NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The National Endowment for the Humanities. ACTION: Notice of Meetings. SUMMARY: Pursuant to the provisions of... following meetings of Humanities Panels will be held at the Old Post Office, 1100 Pennsylvania Avenue, NW...

  4. 75 FR 26285 - Meetings of Humanities Panel

    2010-05-11

    ... THE NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The National Endowment for the Humanities. ACTION: Notice of meetings. SUMMARY: Pursuant to the provisions of... following meetings of Humanities Panels will be held at the Old Post Office, 1100 Pennsylvania Avenue, NW...

  5. 76 FR 77559 - Meeting of Humanities Panel

    2011-12-13

    ... THE NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meeting of Humanities Panel AGENCY: The National Endowment for the Humanities. ACTION: Notice of Meeting. SUMMARY: Pursuant to the provisions of... of the Humanities Panel will be held at the Old Post Office, 1100 Pennsylvania Avenue NW., Washington...

  6. 77 FR 22359 - Meetings of Humanities Panel

    2012-04-13

    ... THE NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The National Endowment for the Humanities. ACTION: Notice of Meetings. SUMMARY: Pursuant to the provisions of... following meetings of Humanities Panels will be held at the Old Post Office, 1100 Pennsylvania Avenue NW...

  7. 76 FR 20375 - Meetings of Humanities Panel

    2011-04-12

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The National Endowment for the Humanities ACTION: Notice of additional meeting. SUMMARY: Pursuant to the... the following meeting of the Humanities Panel will be held at the Old Post Office, 1100 Pennsylvania...

  8. 76 FR 70168 - Meetings of Humanities Panel

    2011-11-10

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The National Endowment for the Humanities. ACTION: Notice of additional meeting. SUMMARY: Pursuant to the... the following meeting of the Humanities Panel will be held at the Old Post Office, 1100 Pennsylvania...

  9. 76 FR 41826 - Meetings of Humanities Panel

    2011-07-15

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The National Endowment for the Humanities. ACTION: Notice of additional meeting. SUMMARY: Pursuant to the... the following meeting of the Humanities Panel will be held at the Old Post Office, 1100 Pennsylvania...

  10. 76 FR 52697 - Meetings of Humanities Panel

    2011-08-23

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The National Endowment for the Humanities. ACTION: Notice of meetings. SUMMARY: Pursuant to the provisions of... following meetings of Humanities Panels will be held at the Old Post Office, 1100 Pennsylvania Avenue, NW...

  11. 76 FR 56242 - Meetings of Humanities Panel

    2011-09-12

    ... THE NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The National Endowment for the Humanities, The National Foundation on the Arts and the Humanities. ACTION... Humanities Panel at the Old Post Office, 1100 Pennsylvania Avenue, NW., Washington, DC 20506 which was...

  12. 76 FR 70765 - Meetings of Humanities Panel

    2011-11-15

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The National Endowment for the Humanities, National Foundation on the Arts and the Humanities. ACTION: Notice...-463, as amended), notice is hereby given that the following meetings of Humanities Panels will be held...

  13. 76 FR 63664 - Meetings of Humanities Panel

    2011-10-13

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The National Endowment for the Humanities. ACTION: Notice of meetings. SUMMARY: Pursuant to the provisions of... following meetings of Humanities Panels will be held at the Old Post Office, 1100 Pennsylvania Avenue, NW...

  14. 77 FR 17102 - Meetings of Humanities Panel

    2012-03-23

    ... THE NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The National Endowment for the Humanities, National Foundation on the Arts and the Humanities ACTION... Humanities Panel at the Old Post Office, 1100 Pennsylvania Avenue NW., Washington, DC 20506, which was...

  15. An intersection test for panel unit roots

    Hanck, C.

    2013-01-01

    This article proposes a new panel unit root test based on Simes' ( 1986) classical intersection test. The test is robust to general patterns of cross-sectional dependence and yet is straightforward to implement, only requiring p-values of time series unit root tests of the series in the panel, and

  16. Blood Test: Comprehensive Metabolic Panel (CMP)

    ... Staying Safe Videos for Educators Search English Español Blood Test: Comprehensive Metabolic Panel (CMP) KidsHealth / For Parents / Blood ... de sangre: panel metabólico ampliado What Is a Blood Test? A blood test is when a sample of ...

  17. Documentation Panels Enhance Teacher Education Programs

    Warash, Bobbie Gibson

    2005-01-01

    Documentation of children's projects is advantageous to their learning process and is also a good method for student teachers to observe the process of learning. Documentation panels are a unique way to help student teachers understand how children learn. Completing a panel requires a student teacher to think through a process. Teachers must learn…

  18. Delamination tolerance studies in laminated composite panels

    Abstract. Determination of levels of tolerance in delaminated composite panels is an important issue in composite structures technology. The primary intention is to analyse delaminated composite panels and estimate Strain. Energy Release Rate (SERR) parameters at the delamination front to feed into acceptability criteria.

  19. Response problems in a vacation panel study

    Christine A. Vogt; Susan I. Stewart

    2001-01-01

    This paper investigates response problems encountered in a panel study of travel behavior. Though the overall response rate to the three-wave panel study was acceptable (over 60%), three types of response problems were encountered: refusal, non-response, and attrition. In a follow-up phone survey, a sample of individuals from each problem response group was questioned...

  20. 78 FR 42982 - Arts Advisory Panel Meeting

    2013-07-18

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of Meetings SUMMARY... hereby given one meeting of the Arts Advisory Panel to the National Council on the Arts will be held at...

  1. 77 FR 61643 - Arts Advisory Panel Meeting

    2012-10-10

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of meeting. SUMMARY... hereby given that sixteen meetings of the Arts Advisory Panel to the National Council on the Arts will be...

  2. 78 FR 17942 - Arts Advisory Panel Meeting

    2013-03-25

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of meetings. SUMMARY... hereby given that five meetings of the Arts Advisory Panel to the National Council on the Arts will be...

  3. 78 FR 59978 - Arts Advisory Panel Meeting

    2013-09-30

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of meeting. SUMMARY... hereby given that one meeting of the Arts Advisory Panel to the National Council on the Arts will be held...

  4. 77 FR 49026 - Arts Advisory Panel Meeting

    2012-08-15

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of meeting. SUMMARY... hereby given that one meeting of the Arts Advisory Panel to the National Council on the Arts will be held...

  5. 78 FR 21978 - Arts Advisory Panel Meeting

    2013-04-12

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of meeting. SUMMARY... is hereby given that one meeting of the Arts Advisory Panel to the National Council on the Arts will...

  6. 78 FR 26399 - Arts Advisory Panel Meeting

    2013-05-06

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of Meeting. SUMMARY... hereby given that one meeting of the Arts Advisory Panel to the National Council on the Arts will be held...

  7. 77 FR 13154 - Arts Advisory Panel Meeting

    2012-03-05

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice--meeting. Pursuant to... given that a meeting of the Arts Advisory Panel to the National Council on the Arts will be held by...

  8. 77 FR 67836 - Arts Advisory Panel Meeting

    2012-11-14

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of Meeting. SUMMARY... hereby given that fifteen meetings of the Arts Advisory Panel to the National Council on the Arts will be...

  9. 78 FR 5213 - Arts Advisory Panel Meeting

    2013-01-24

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of meeting. SUMMARY... hereby given that one meeting of the Arts Advisory Panel to the National Council on the Arts will be held...

  10. 77 FR 75672 - Arts Advisory Panel Meeting

    2012-12-21

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of Meeting. SUMMARY... hereby given that seven meetings of the Arts Advisory Panel to the National Council on the Arts will be...

  11. 77 FR 41808 - Arts Advisory Panel Meeting

    2012-07-16

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of meeting. SUMMARY... hereby given that two meetings of the Arts Advisory Panel to the National Council on the Arts will be...

  12. 78 FR 68099 - Arts Advisory Panel Meeting

    2013-11-13

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of Meeting. SUMMARY... hereby given that twenty- one meetings of the Arts Advisory Panel to the National Council on the Arts...

  13. 78 FR 50451 - Arts Advisory Panel Meeting

    2013-08-19

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of Meetings. SUMMARY... hereby given that one meeting of the Arts Advisory Panel to the National Council on the Arts will be held...

  14. 77 FR 56875 - Arts Advisory Panel Meeting

    2012-09-14

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of meeting. SUMMARY... hereby given that two meetings of the Arts Advisory Panel to the National Council on the Arts will be...

  15. 77 FR 13367 - Arts Advisory Panel Meeting

    2012-03-06

    ... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of meeting. SUMMARY... hereby given that a meeting of the Arts Advisory Panel to the National Council on the Arts will be held...

  16. Research challenges for energy data management (panel)

    Pedersen, Torben Bach; Lehner, Wolfgang

    2013-01-01

    This panel paper aims at initiating discussion at the Second International Workshop on Energy Data Management (EnDM 2013) about the important research challenges within Energy Data Management. The authors are the panel organizers, extra panelists will be recruited before the workshop...

  17. Robust block bootstrap panel predictability tests

    Westerlund, J.; Smeekes, S.

    2013-01-01

    Most panel data studies of the predictability of returns presume that the cross-sectional units are independent, an assumption that is not realistic. As a response to this, the current paper develops block bootstrap-based panel predictability tests that are valid under very general conditions. Some

  18. Air loads on solar panels during launch

    Beltman, W.M.; van der Hoogt, Peter; Spiering, R.M.E.J.; Tijdeman, H.

    1996-01-01

    The dynamical behaviour of solar panels during launch is significantly affected by the thin layers of air trapped between the panels. For narrow gaps the air manifests itself not only as a considerable added mass, but its viscosity can result in a substantial amount of damping. A model has been

  19. Circuits in the Sun: Solar Panel Physics

    Gfroerer, Tim

    2013-01-01

    Typical commercial solar panels consist of approximately 60 individual photovoltaic cells connected in series. Since the usual Kirchhoff rules apply, the current is uniform throughout the circuit, while the electric potential of the individual devices is cumulative. Hence, a solar panel is a good analog of a simple resistive series circuit, except…

  20. Differing professional opinions: 1987 special review panel

    1988-01-01

    In November 1987, the five-member Differing Professional Opinions Special Review Panel established by the Executive Director for Operations of the US Nuclear Regulatory Commission to review agency policies and procedures for handling differing professional opinions (DPOs) presented its findings and recommendations in NUREG-1290. The issuance of that report completed the first task of the panel's charter. In accordance with Manual chapter 4125, Section L, and the charter of the Special Review Panel, the panel's second task was to ''...review...the DPOs submitted subsequent to the previous Panel's review, in order to identify any employee whose DPO made a significant contribution to the Agency or to the public safety but who has not yet been recognized for such contribution.'' This Addendum provides the findings of that review

  1. Graphite/epoxy orthogrid panel fabrication

    Lager, J. R.

    1978-01-01

    The structural concept considered for a spacecraft body structure is a grid stiffened skin with a skin laminate configuration and the stiffener grid geometry selected to best suit the design requirements. The orthogrid panel developed weighs 0.55 lb/sq ft and resisted an ultimate in-plane shear load of 545 lbf/in. The basic concept of a grid stiffener composite panel is that a relatively thin skin is reinforced with a gridwork of stiffeners so that the overall panel can resist design loads without becoming structurally unstable or being overstressed. The main feature of the orthogrid panel design is that it provides the potential for low cost structural panels when advanced to the production phase. The most innovative part of the fabrication method is the foam/fiberglass stiffener web grid billet fabrication and machining to size.

  2. The Atomic Safety and Licensing Board Panel

    1998-01-01

    Through the Atomic Energy Act, Congress made is possible for the public to get a full and fair hearing on civilian nuclear matters. Individuals who are directly affected by any licensing action involving a facility producing or utilizing nuclear materials may participate in a formal hearing, on the record, before independent judges on the Atomic Safety and Licensing Board Panel (ASLBP or Panel). Frequently, in deciding whether a license, permit, amendment, or extension should be granted to a particular applicant, the Panel members must be more than mere umpires. If appropriate, they are authorized to go beyond the issues the parties place before them in order to identify, explore, and resolve significant questions involving threats to the public health and safety that come to a board's attention during the proceedings. This brochure explains the purpose of the panel. Also addressed are: type of hearing handled; method of public participation; formality of hearings; high-level waste; other panel responsibilities and litigation technology

  3. Thin film photovoltaic panel and method

    Ackerman, Bruce; Albright, Scot P.; Jordan, John F.

    1991-06-11

    A thin film photovoltaic panel includes a backcap for protecting the active components of the photovoltaic cells from adverse environmental elements. A spacing between the backcap and a top electrode layer is preferably filled with a desiccant to further reduce water vapor contamination of the environment surrounding the photovoltaic cells. The contamination of the spacing between the backcap and the cells may be further reduced by passing a selected gas through the spacing subsequent to sealing the backcap to the base of the photovoltaic panels, and once purged this spacing may be filled with an inert gas. The techniques of the present invention are preferably applied to thin film photovoltaic panels each formed from a plurality of photovoltaic cells arranged on a vitreous substrate. The stability of photovoltaic conversion efficiency remains relatively high during the life of the photovoltaic panel, and the cost of manufacturing highly efficient panels with such improved stability is significantly reduced.

  4. Report of the Federal Internetworking Requirements Panel

    NONE

    1994-05-31

    The Federal Internetworking Requirements Panel (FIRP) was established by the National Institute of Standards and Technology (NIST) to reassess Federal requirements for open systems networks and to recommend policy on the Government`s use of networking standards. The Panel was chartered to recommend actions which the Federal Government can take to address the short and long-term issues of interworking and convergence of networking protocols--particularly the Internet Protocol Suite (IPS) and Open Systems Interconnection (OSI) protocol suite and, when appropriate, proprietary protocols. The Panel was created at the request of the Office of Management and Budget in collaboration with the Federal Networking Council and the Federal Information Resources Management Policy Council. The Panel`s membership and charter are contained in an appendix to this report.

  5. Photoelectric panel with equatorial mounting of drive

    Kukhta, M. S.; Krauinsh, P. Y.; Krauinsh, D. P.; Sokolov, A. P.; Mainy, S. B.

    2018-03-01

    The relevance of the work is determined by the need to create effective models for sunny energy. The article considers a photoelectric panel equipped with a system for tracking the sun. Efficiency of the system is provided by equatorial mounting, which compensates for the rotation of the Earth by rotating the sunny panel in the plane of the celestial equator. The specificity of climatic and geographical conditions of Tomsk is estimated. The dynamics of power variations of photoelectric panels with equatorial mounting during seasonal fluctuations in Tomsk is calculated. A mobile photovoltaic panel with equatorial mounting of the drive has been developed. The methods of design strategy for placing photovoltaic panels in the architectural environment of the city are presented. Key words: sunny energy, photovoltaics, equatorial mounting, mechatronic model, wave reducer, electric drive.

  6. Gene panel testing for inherited cancer risk.

    Hall, Michael J; Forman, Andrea D; Pilarski, Robert; Wiesner, Georgia; Giri, Veda N

    2014-09-01

    Next-generation sequencing technologies have ushered in the capability to assess multiple genes in parallel for genetic alterations that may contribute to inherited risk for cancers in families. Thus, gene panel testing is now an option in the setting of genetic counseling and testing for cancer risk. This article describes the many gene panel testing options clinically available to assess inherited cancer susceptibility, the potential advantages and challenges associated with various types of panels, clinical scenarios in which gene panels may be particularly useful in cancer risk assessment, and testing and counseling considerations. Given the potential issues for patients and their families, gene panel testing for inherited cancer risk is recommended to be offered in conjunction or consultation with an experienced cancer genetic specialist, such as a certified genetic counselor or geneticist, as an integral part of the testing process. Copyright © 2014 by the National Comprehensive Cancer Network.

  7. Micro-inverter solar panel mounting

    Morris, John; Gilchrist, Phillip Charles

    2016-02-02

    Processes, systems, devices, and articles of manufacture are provided. Each may include adapting micro-inverters initially configured for frame-mounting to mounting on a frameless solar panel. This securement may include using an adaptive clamp or several adaptive clamps secured to a micro-inverter or its components, and using compressive forces applied directly to the solar panel to secure the adaptive clamp and the components to the solar panel. The clamps can also include compressive spacers and safeties for managing the compressive forces exerted on the solar panels. Friction zones may also be used for managing slipping between the clamp and the solar panel during or after installation. Adjustments to the clamps may be carried out through various means and by changing the physical size of the clamps themselves.

  8. Infant attachment, adult attachment, and maternal sensitivity: revisiting the intergenerational transmission gap.

    Behrens, Kazuko Y; Haltigan, John D; Bahm, Naomi I Gribneau

    2016-08-01

    This study investigated the intergenerational transmission of attachment, utilizing the Adult Attachment Interview (AAI), the Strange Situation Procedure (SSP), and the Maternal Behavioral Q-Set (MBQS). We revisited fundamental questions in attachment theory and research by examining: (1) the level of intergenerational agreement between maternal attachment representations and infant attachment security, and (2) whether maternal sensitivity serves as an intergenerational mediator between adult and infant attachment security. Significant categorical matches between the AAI and the SSP as well as mean differences for MBQS scores between adult attachment secure-insecure groups were found. Consistent with earlier intergenerational research, maternal sensitivity only partially mediated the AAI-SSP link, indicating the transmission gap remains. Consistent with recent mediation studies, using more contemporary analytical techniques, it was confirmed that maternal sensitivity did mediate the direct pathway between AAI security and SSP security. Thus, the transmission gap appears somewhat different depending on the statistical method used to measure mediation. Post hoc analyses considered mothers' childhood experiences of separation/divorce and this helped make sense of intergenerational mismatches.

  9. Sexuality examined through the lens of attachment theory: attachment, caregiving, and sexual satisfaction.

    Péloquin, Katherine; Brassard, Audrey; Lafontaine, Marie-France; Shaver, Phillip R

    2014-01-01

    Attachment researchers have proposed that the attachment, caregiving, and sexual behavioral systems are interrelated in adult love relationships (Mikulincer & Shaver, 2007 ). This study examined whether aspects of partners' caregiving (proximity, sensitivity, control, compulsive caregiving) mediated the association between their attachment insecurities (anxiety and avoidance) and each other's sexual satisfaction in two samples of committed couples (Study 1: 126 cohabiting or married couples from the general community; Study 2: 55 clinically distressed couples). Partners completed the Experiences in Close Relationships measure (Brennan, Clark, & Shaver, 1998 ), the Caregiving Questionnaire (Kunce & Shaver, 1994 ), and the Global Measure of Sexual Satisfaction (Lawrance & Byers, 1998 ). Path analyses based on the actor-partner interdependence model (APIM) revealed that caregiving proximity mediated the association between low attachment avoidance and partners' sexual satisfaction in distressed and nondistressed couples. Sensitivity mediated this association in nondistressed couples only. Control mediated the association between men's insecurities (attachment-related avoidance and anxiety) and their partners' low sexual satisfaction in nondistressed couples. Attachment anxiety predicted compulsive caregiving, but this caregiving dimension was not a significant mediator. These results are discussed in light of attachment theory and their implications for treating distressed couples.

  10. Effect of Attachment-Based Therapy on Behavioral Disorders in Girls with Attachment Problems

    Marzieh Jahanbakhsh

    2014-09-01

    Full Text Available Background: Multidimensional and complex nature of children`s behavioral disorders requires assessment and usage of modern treatments. The present study investigated the effects of attachment-based therapy on behavioral disorders (depression, over anxiety and oppositional defiant in girl students of primary school who had attachment problems. Materials and Methods: This study is an empirical plan with pretest-posttest and control group. The target samples were 34 individuals of 388 second and fourth grade students of primary school that had highest scores on attachment problems and behavioral disorders (depression, over anxiety and oppositional defiant. Evaluation implemented using Randolph attachment disorder questionnaire (RADQ and Ontario mental health test. Mothers were presented in 10 group sessions of attachment-based intervention and its effects investigated in their girl`s behavioral disorders (depression, over anxiety and oppositional defiant. Results: Reduction rate of behavioral disorders general scores (depression, over anxiety and oppositional defiant of experimental group compared with control group showed significant decreases in posttest and three months follow up. Conclusion: The attachment based therapy offered for mothers of the girls with attachment problems was effective to reduction of behavioral disorders (depression, over anxiety and oppositional defiant symptoms in their children and the mother`s continues attention to interventional methods showed more improvement in follow up evaluation.

  11. Viii. Attachment and sleep among toddlers: disentangling attachment security and dependency.

    Bélanger, Marie-Ève; Bernier, Annie; Simard, Valérie; Bordeleau, Stéphanie; Carrier, Julie

    2015-03-01

    Many scholars have proposed that parent-child attachment security should favor child sleep. Research has yet, however, to provide convincing support for this hypothesis. The current study used objective measures of sleep and attachment to assess the longitudinal links between mother-child attachment security and subsequent sleep, controlling for child dependency. Sixty-two middle-class families (30 girls) were met twice, when children were 15 months (Wave 1; W1) and 2 years of age (Wave 2; W2). At W1, mother-child attachment was assessed with the observer version of the Attachment Q-Sort. At W2, children wore an actigraph monitor for 72 hr. Results indicated that children more securely attached to their mothers subsequently slept more at night and had higher sleep efficiency, and these predictions were not confounded by child dependency. These findings suggest a unique role for secure attachment relationships in the development of young children's sleep regulation, while addressing methodological issues that have long precluded consensus in this literature. © 2015 The Society for Research in Child Development, Inc.

  12. Morphological Heterogeneity and Attachment of Phaeobacter inhibens.

    Segev, Einat; Tellez, Adèle; Vlamakis, Hera; Kolter, Roberto

    2015-01-01

    The Roseobacter clade is a key group of bacteria in the ocean exhibiting diverse metabolic repertoires and a wide range of symbiotic life-styles. Many Roseobacters possess remarkable capabilities of attachment to both biotic and abiotic surfaces. When attached to each other, these bacteria form multi-cellular structures called rosettes. Phaeobacter inhibens, a well-studied Roseobacter, exhibits various cell sizes and morphologies that are either associated with rosettes or occur as single cells. Here we describe the distribution of P. inhibens morphologies and rosettes within a population. We detect an N-acetylglucosamine-containing polysaccharide on the poles of some cells and at the center of all rosettes. We demonstrate that rosettes are formed by the attachment of individual cells at the polysaccharide-containing pole rather than by cell division. Finally, we show that P. inhibens attachment to abiotic surfaces is hindered by the presence of DNA from itself, but not from other bacteria. Taken together, our findings demonstrate that cell adhesiveness is likely to play a significant role in the life cycle of P. inhibens as well as other Roseobacters.

  13. Morphological Heterogeneity and Attachment of Phaeobacter inhibens.

    Einat Segev

    Full Text Available The Roseobacter clade is a key group of bacteria in the ocean exhibiting diverse metabolic repertoires and a wide range of symbiotic life-styles. Many Roseobacters possess remarkable capabilities of attachment to both biotic and abiotic surfaces. When attached to each other, these bacteria form multi-cellular structures called rosettes. Phaeobacter inhibens, a well-studied Roseobacter, exhibits various cell sizes and morphologies that are either associated with rosettes or occur as single cells. Here we describe the distribution of P. inhibens morphologies and rosettes within a population. We detect an N-acetylglucosamine-containing polysaccharide on the poles of some cells and at the center of all rosettes. We demonstrate that rosettes are formed by the attachment of individual cells at the polysaccharide-containing pole rather than by cell division. Finally, we show that P. inhibens attachment to abiotic surfaces is hindered by the presence of DNA from itself, but not from other bacteria. Taken together, our findings demonstrate that cell adhesiveness is likely to play a significant role in the life cycle of P. inhibens as well as other Roseobacters.

  14. Clinical Perspective Attachment, parenting styles and bullying ...

    Research that focuses on combining attachment, parenting styles, bullying and the reciprocal nature thereof in the parent–adolescent and peer relationships is limited. The bio-psychosocial changes that adolescents experience open up broader social realities and are perceived differently by parents and adolescents.

  15. Adolescent attachment, family functioning and depressive symptoms ...

    The Self-Report of Family Inventory (SFI), Experiences of Close Relationships Scale (ECR), Network of Relationships Inventory (NRI), Children's Depression Inventory (CDI) and Child Behavior Checklist (CBCL) were used to assess depression, parental support and attachment. Results. Two models were examined: one ...

  16. Attachment at School Age and Academic Performance.

    Moss, Ellen; St-Laurent, Diane

    2001-01-01

    Examined longitudinally the association between attachment at age 6 and school-related cognitive functioning 2 years later in a French Canadian sample. Found that secure children had higher scores than insecure peers on communication, cognitive engagement, and mastery motivation. Controlling children were at greatest risk for school…

  17. No Strings Attached: Open Source Solutions

    Fredricks, Kathy

    2009-01-01

    Imagine downloading a new software application and not having to worry about licensing, finding dollars in the budget, or incurring additional maintenance costs. Imagine finding a Web design tool in the public domain--free for use. Imagine major universities that provide online courses with no strings attached. Imagine online textbooks without a…

  18. Maternal anxiety, maternal sensitivity, and attachment

    Stevenson-Hinde, Joan; Chicot, Rebecca; Shouldice, Anne; Hinde, Camilla A.

    2016-01-01

    Previous research has related maternal anxiety to insecurity of attachment. Here we ask whether different aspects of maternal sensitivity mediate this link. From a community sample of intact families with 1-3 children, mothers with 4.5-year-olds were selected for low, medium, or high anxiety

  19. Maternal anxiety, maternal sensitivity, and attachment

    Stevenson-Hinde, J.; Chicot, R.; Schouldice, A.; Hinde, C.A.

    2013-01-01

    Previous research has related maternal anxiety to insecurity of attachment. Here we ask whether different aspects of maternal sensitivity mediate this link. From a community sample of intact families with 1-3 children, mothers with 4.5-year-olds were selected for low, medium, or high anxiety levels

  20. Place Attachment and Environmentally Responsible Behavior.

    Vaske, Jerry J.; Kobrin, Katherine C.

    2001-01-01

    Illustrates how an attachment to a local natural resource can influence environmentally responsible behavior (ERB) in an individual's everyday life. Reports four general and three specific behavioral indicators reflecting a single environmentally responsible latent construct. Investigates the place dependence and place identity's role on ERB using…

  1. Dissociative electron attachment to ozone: rate constant

    Skalny, J.D.; Cicman, P.; Maerk, T.D.

    2002-01-01

    The rate constant for dissociative electron attachment to ozone has been derived over the energy range of 0-10 eV by using previously measured cross section data revisited here in regards to discrimination effect occurring during the extraction of ions. The obtained data for both possible channels exhibit the maximum at mean electron energies close to 1 eV. (author)

  2. Attachment Contexts of Adolescent Friendship and Romance

    Miller, Judi Beinstein; Hoicowitz, Tova

    2004-01-01

    The purpose of this study was to compare memories of attachments to parents, friends, and romantic partners in relation to the maintenance of high school friendships and romantic relationships. College students recorded the length of their friendships and romantic relationships during high school and rated the quality of each. They also rated…

  3. Topological systems versus attachment relations | Guido ...

    The manuscript makes a category-theoretic comparison between the concepts of topological system of S. Vickers and attachment relation of C. Guido. With the help of the recent definition of the notions in the framework of an arbitrary variety of algebras, we consider functorial relationships between the categories of such ...

  4. Childhood Abuse and Attachment Styles of Adolescents

    Karakus, Ozlem

    2012-01-01

    Introduction: The fact that emotional and social experiences in early childhood period within the family influence the experiences in adolescence and adulthood (communication skills, interpersonal relations) is not a new case. Therefore, the aim of this study is to examine the relationship between childhood abuse and attachment styles. Method: The…

  5. Panel fabrication utilizing GaAs solar cells

    Mardesich, N.

    1984-01-01

    The development of the GaAs solar cells for space applications is described. The activities in the fabrication of GaAs solar panels are outlined. Panels were fabricated while introducing improved quality control, soldering laydown and testing procedures. These panels include LIPS II, San Marco Satellite, and a low concentration panel for Rockwells' evaluation. The panels and their present status are discussed.

  6. Noise Reduction in Double‿Panel Structures by Cavity and Panel Resonance Control

    Ho, J.; Berkhoff, Arthur P.

    2011-01-01

    This paper presents an investigation of the cavity and the panel resonance control in a double‿panel structure. The double‿panel structure, which consists of two panels with air in the gap, is widely adopted in many applications such as aerospace due to its light weight and effective transmission‿loss at high frequency. However, the resonance of the cavity and the poor transmission‿loss at low frequency limit its noise control performance. Applying active control forces on the panels or utili...

  7. Acoustically Tailored Composite Rotorcraft Fuselage Panels

    Hambric, Stephen; Shepherd, Micah; Koudela, Kevin; Wess, Denis; Snider, Royce; May, Carl; Kendrick, Phil; Lee, Edward; Cai, Liang-Wu

    2015-01-01

    A rotorcraft roof sandwich panel has been redesigned to optimize sound power transmission loss (TL) and minimize structure-borne sound for frequencies between 1 and 4 kHz where gear meshing noise from the transmission has the most impact on speech intelligibility. The roof section, framed by a grid of ribs, was originally constructed of a single honeycomb core/composite face sheet panel. The original panel has coincidence frequencies near 700 Hz, leading to poor TL across the frequency range of 1 to 4 kHz. To quiet the panel, the cross section was split into two thinner sandwich subpanels separated by an air gap. The air gap was sized to target the fundamental mass-spring-mass resonance of the double panel system to less than 500 Hz. The panels were designed to withstand structural loading from normal rotorcraft operation, as well as 'man-on-the-roof' static loads experienced during maintenance operations. Thin layers of VHB 9469 viscoelastomer from 3M were also included in the face sheet ply layups, increasing panel damping loss factors from about 0.01 to 0.05. Measurements in the NASA SALT facility show the optimized panel provides 6-11 dB of acoustic transmission loss improvement, and 6-15 dB of structure-borne sound reduction at critical rotorcraft transmission tonal frequencies. Analytic panel TL theory simulates the measured performance quite well. Detailed finite element/boundary element modeling of the baseline panel simulates TL slightly more accurately, and also simulates structure-borne sound well.

  8. Graphite Composite Panel Polishing Fixture

    Hagopian, John; Strojny, Carl; Budinoff, Jason

    2011-01-01

    The use of high-strength, lightweight composites for the fixture is the novel feature of this innovation. The main advantage is the light weight and high stiffness-to-mass ratio relative to aluminum. Meter-class optics require support during the grinding/polishing process with large tools. The use of aluminum as a polishing fixture is standard, with pitch providing a compliant layer to allow support without deformation. Unfortunately, with meter-scale optics, a meter-scale fixture weighs over 120 lb (.55 kg) and may distort the optics being fabricated by loading the mirror and/or tool used in fabrication. The use of composite structures that are lightweight yet stiff allows standard techniques to be used while providing for a decrease in fixture weight by almost 70 percent. Mounts classically used to support large mirrors during fabrication are especially heavy and difficult to handle. The mount must be especially stiff to avoid deformation during the optical fabrication process, where a very large and heavy lap often can distort the mount and optic being fabricated. If the optic is placed on top of the lapping tool, the weight of the optic and the fixture can distort the lap. Fixtures to support the mirror during fabrication are often very large plates of aluminum, often 2 in. (.5 cm) or more in thickness and weight upwards of 150 lb (68 kg). With the addition of a backing material such as pitch and the mirror itself, the assembly can often weigh over 250 lb (.113 kg) for a meter-class optic. This innovation is the use of a lightweight graphite panel with an aluminum honeycomb core for use as the polishing fixture. These materials have been used in the aerospace industry as structural members due to their light weight and high stiffness. The grinding polishing fixture consists of the graphite composite panel, fittings, and fixtures to allow interface to the polishing machine, and introduction of pitch buttons to support the optic under fabrication. In its

  9. PERBANDINGAN UNJUK KERJA ANTARA PANEL SEL SURYA BERPENJEJAK DENGAN PANEL SEL SURYA DIAM

    Syafaruddin Ch

    2010-07-01

    Full Text Available The ability to produce electrical energy at Solar Power Plant  is highly dependent on the magnitude and duration of sun exposure on the solar cell panels. The movement of the sun from east to west that periodicity in every day is a problem at  the  optimization generation of electricity at  Solar Power Plant   if using solar panel that motionless. This is because the solar cell panel can not catch the maximum sun exposure. To solve the above problem then designed a solar cell panel  tracker  capable of follo-wing the movements of the sun. Then conducted a test to see the performance of solar cell pa-nel  tracker  and compare it with the performance of solar cell panel was motionless. The testing doing along 6 days, with way to irradiate the panel of solar cells  tracker  and panels of solar cell motionless with sun exposure  along a  full day. Then the electric current generated each panel were recorded. The comparison of current then generating comparison of electric power delivery. The result show that the solar cell panel  tracker  produce the average current is 2.19 A whereas solar-cell panel still 1.97 A.  This result   indicate that average power for solar cell panel  tracker  39.41 W while for solar cell panel that motionless is  35.46 W. These results indicate that the performance of solar cell panel  tracker  better than  solar cell panel motionless.

  10. Activating attachment representations during memory retrieval modulates intrusive traumatic memories.

    Bryant, Richard A; Chan, Iris

    2017-10-01

    Although priming mental representations of attachment security reduces arousal, research has not examined the effect of attachment on the retrieval of emotionally arousing memories. This study investigated the effect of priming attachment security on the retrieval of emotional memories. Seventy-five participants viewed negative and neutral images, and two days later received either an attachment prime or a control prime immediately prior to free recall of the images. Two days later, participants reported how frequently they experienced intrusions of the negative images. The attachment group had less distress, and reported fewer subsequent intrusions than the control group. Attachment style moderated these effects such that individuals with an avoidant attachment style were not impacted by the attachment prime. These findings suggest that priming attachment security decreases distress during memory reactivation, and this may reduce subsequent intrusive memories. Copyright © 2017 Elsevier Inc. All rights reserved.

  11. PVT Panels. Fully renewable and competitive

    Bakker, M.; Strootman, K.J.; Jong, M.J.M.

    2003-10-01

    A photovoltaic/thermal (PVT) panel is a combination of photovoltaic cells with a solar thermal collector, generating solar electricity and solar heat simultaneously. PVT panels generate more solar energy per unit surface area than a combination of separate PV panels and solar thermal collectors, and share the aesthetic advantage of PV. After several years of research, PVT panels have been developed into a product that is now ready for market introduction. One of the most promising system concepts, consisting of 25 m 2 of PVT panels and a ground coupled heat pump, has been simulated in TRNSYS, and has been found to be able to fully cover both the building related electricity and heat consumption, while keeping the long-term average ground temperature constant. The cost and payback time of such a system have been determined; it has been found that the payback time of this system is approximately two-thirds of the payback time of an identical system but with 21 m 2 of PV panels and 4 m 2 of solar thermal collectors. Finally, by looking at the expected growth in the PV and solar thermal collector market, the market potential for for PVT panels has been found to be very large

  12. Insecure attachment behavior and partner violence: incorporating couple perceptions of insecure attachment and relational aggression.

    Oka, Megan; Sandberg, Jonathan G; Bradford, Angela B; Brown, Andrew

    2014-10-01

    Intimate partner violence and insecure attachment are therapeutically relevant concepts when working with couples. The link between attachment and intimate partner violence has been examined in the literature, but an area of aggression that often goes unexamined is relational aggression, or using third parties as a means of being aggressive toward a partner. We asked how participants' attachment behaviors were related to their own and partners' relational and physical aggression. We used structural equation modeling to estimate actor-partner interdependence among these relationships in 644 heterosexual couples. Results indicated significant partner paths from attachment to relational aggression, as well as significant actor paths between relational aggression and physical aggression. Implications were discussed. Data for this study were collected from the RELATE assessment. © 2014 American Association for Marriage and Family Therapy.

  13. Attachment within life history theory: an evolutionary perspective on individual differences in attachment.

    Szepsenwol, Ohad; Simpson, Jeffry A

    2018-03-15

    In this article, we discuss theory and research on how individual differences in adult attachment mediate the adaptive calibration of reproductive strategies, cognitive schemas, and emotional expression and regulation. We first present an integration of attachment theory and life history theory. Then, we discuss how early harsh and/or unpredictable environments may promote insecure attachment by hampering parents' ability to provide sensitive and reliable care to their children. Finally, we discuss how, in the context of harsh and/or unpredictable environments, different types of insecure attachment (i.e. anxiety and avoidance) may promote evolutionary adaptive reproductive strategies, cognitive schemas, and emotional expression and regulation profiles. Copyright © 2018 Elsevier Ltd. All rights reserved.

  14. The design of the ITER first wall panels

    Mitteau, R., E-mail: raphael.mitteau@iter.org [ITER Organization, Route de Vinon sur Verdon, 13115 St. Paul lez Durance (France); Calcagno, B.; Chappuis, P.; Eaton, R.; Gicquel, S. [ITER Organization, Route de Vinon sur Verdon, 13115 St. Paul lez Durance (France); Chen, J. [Southwestern Institute of Physics, Huangjing Road, Chengdu 610225 (China); Labusov, A. [Efremov Research Institute, 189631 St. Petersburg (Russian Federation); Martin, A.; Merola, M.; Raffray, R. [ITER Organization, Route de Vinon sur Verdon, 13115 St. Paul lez Durance (France); Ulrickson, M. [Sandia National Laboratory, Albuquerque, NM (United States); Zacchia, F. [Fusion for Energy, Josep Pla 2, Torres Diagonal Litoral B3, 08019 Barcelona (Spain)

    2013-10-15

    Highlights: • The ITER blanket is in the final stage of design completion. • Issues raised about the blanket heat loads and remote handling strategy are addressed, while integrating the in-vessel coils. • Key design justifications are presented, followed by a summary of the current status of the manufacturing plan and R and D activities. -- Abstract: The ITER blanket is in the final stage of design completion. The issues raised during the 2007 ITER design review about the first wall (FW) heat loads and remote handling strategy have been addressed, while integrating the recently confirmed in-vessel coils. This paper focuses on the FW design, which is nearing completion. Key design justifications are presented, followed by a summary of the current status of the manufacturing plan and R and D activities.

  15. 76 FR 19147 - Aerospace Safety Advisory Panel; Meeting.

    2011-04-06

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (11-030)] Aerospace Safety Advisory Panel... Aeronautics and Space Administration announce a forthcoming meeting of the Aerospace Safety Advisory Panel.... Kathy Dakon, Aerospace Safety Advisory Panel Executive Director, National Aeronautics and Space...

  16. 76 FR 62455 - Aerospace Safety Advisory Panel; Meeting

    2011-10-07

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (11-088)] Aerospace Safety Advisory Panel... Aeronautics and Space Administration announces a forthcoming meeting of the Aerospace Safety Advisory Panel... Burch, Aerospace Safety Advisory Panel Administrative Officer, National Aeronautics and Space...

  17. 78 FR 56941 - Aerospace Safety Advisory Panel; Meeting

    2013-09-16

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice: 13-114] Aerospace Safety Advisory Panel... Aeronautics and Space Administration announces a forthcoming meeting of the Aerospace Safety Advisory Panel.... Harmony Myers, Aerospace Safety Advisory Panel Executive Director, National Aeronautics and Space...

  18. 77 FR 25502 - Aerospace Safety Advisory Panel; Meeting

    2012-04-30

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (12-030)] Aerospace Safety Advisory Panel... Aeronautics and Space Administration announce a forthcoming meeting of the Aerospace Safety Advisory Panel... FURTHER INFORMATION CONTACT: Ms. Harmony Myers, Aerospace Safety Advisory Panel Executive Director...

  19. 77 FR 38090 - Aerospace Safety Advisory Panel; Meeting.

    2012-06-26

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice 12-044] Aerospace Safety Advisory Panel... Aeronautics and Space Administration announces a forthcoming meeting of the Aerospace Safety Advisory Panel.... Harmony Myers, Aerospace Safety Advisory Panel Executive Director, National Aeronautics and Space...

  20. 78 FR 1265 - Aerospace Safety Advisory Panel; Meeting

    2013-01-08

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice 13-001] Aerospace Safety Advisory Panel... Aeronautics and Space Administration announces a forthcoming meeting of the Aerospace Safety Advisory Panel..., Aerospace Safety Advisory Panel Executive Director, National Aeronautics and Space Administration...

  1. 75 FR 6407 - Aerospace Safety Advisory Panel; Meeting

    2010-02-09

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (10- 020)] Aerospace Safety Advisory Panel... Aeronautics and Space Administration announce a forthcoming meeting of the Aerospace Safety Advisory Panel... FURTHER INFORMATION CONTACT: Ms. Kathy Dakon, Aerospace Safety Advisory Panel Executive Director, National...

  2. 75 FR 61219 - Aerospace Safety Advisory Panel; Meeting

    2010-10-04

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (10-116)] Aerospace Safety Advisory Panel... Aeronautics and Space Administration announces a forthcoming meeting of the Aerospace Safety Advisory Panel... Dakon, Aerospace Safety Advisory Panel Executive Director, National Aeronautics and Space Administration...

  3. 77 FR 58413 - Aerospace Safety Advisory Panel; Meeting

    2012-09-20

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice 12-074] Aerospace Safety Advisory Panel... Aeronautics and Space Administration announces a forthcoming meeting of the Aerospace Safety Advisory Panel.... Harmony Myers, Aerospace Safety Advisory Panel Executive Director, National Aeronautics and Space...

  4. Attaching Thermocouples by Peening or Crimping

    Murtland, Kevin; Cox, Robert; Immer, Christopher

    2006-01-01

    Two simple, effective techniques for attaching thermocouples to metal substrates have been devised for high-temperature applications in which attachment by such conventional means as welding, screws, epoxy, or tape would not be effective. The techniques have been used successfully to attach 0.005- in. (0.127-mm)-diameter type-S thermocouples to substrates of niobium alloy C-103 and stainless steel 416 for measuring temperatures up to 2,600 F (1,427 C). The techniques are equally applicable to other thermocouple and substrate materials. In the first technique, illustrated in the upper part of the figure, a hole slightly wider than twice the diameter of one thermocouple wire is drilled in the substrate. The thermocouple is placed in the hole, then the edge of the hole is peened in one or more places by use of a punch (see figure). The deformed material at the edge secures the thermocouple in the hole. In the second technique a hole is drilled as in the first technique, then an annular relief area is machined around the hole, resulting in structure reminiscent of a volcano in a crater. The thermocouple is placed in the hole as in the first technique, then the "volcano" material is either peened by use of a punch or crimped by use of sidecutters to secure the thermocouple in place. This second technique is preferable for very thin thermocouples [wire diameter .0.005 in. (.0.127 mm)] because standard peening poses a greater risk of clipping one or both of the thermocouple wires. These techniques offer the following advantages over prior thermocouple-attachment techniques: . Because these techniques involve drilling of very small holes, they are minimally invasive . an important advantage in that, to a first approximation, the thermal properties of surrounding areas are not appreciably affected. . These techniques do not involve introduction of any material, other than the substrate and thermocouple materials, that could cause contamination, could decompose, or oxidize

  5. Place Attachment in the Bible: The Role of Attachment to Sacred Places in Religious Life

    Counted, Victor; Watts, Fraser

    2017-01-01

    This paper examines the role of place attachment in religious life by analyzing various significant place events in the Bible, using analysis of biblical discourse. The paper looks at various biblical places, and explores the implications of approaching these sacred settings in terms of place attachment theory. In the Old Testament we focus on Mount Sinai, Canaan, and Jerusalem, and in the New Testament on Galilee, Jerusalem, and on view that Christianity, to some extent, transcends place att...

  6. Predicting panel scores by linguistic analysis

    Van den Besselaar, P.; Stout, L.; Gou, X

    2016-07-01

    In this paper we explore the use of text analysis for deriving quality indicators of project proposals. We do full text analysis of 3030 review reports. After term extraction, we aggregate the term occurrences to linguistic categories. Using thse linguistic categories as independent variables, we study how well these predict the grading by the review panels. Together, the different linguistic categories explain about 50% of the variance in the grading of the applications. The relative importance of the different linguistic categories inform us about the way the panels work. This can be used to develop altmetrics for the quality of the peer and panel review processes. (Author)

  7. Advanced Ultrasupercritical (AUSC) Tube Membrane Panel Development

    Pschirer, James [Alstom Power Inc., Windsor, CT (United States); Burgess, Joshua [Alstom Power Inc., Windsor, CT (United States); Schrecengost, Robert [Alstom Power Inc., Windsor, CT (United States)

    2017-08-16

    Alstom Power Inc., a wholly owned subsidiary of the General Electric Company (GE), has completed the project “Advanced Ultrasupercritical (AUSC) Tube Membrane Panel Development” under U.S. Department of Energy (DOE) Award Number DE-FE0024076. This project was part of DOE’s Novel Crosscutting Research and Development to Support Advanced Energy Systems program. AUSC Tube Membrane Panel Development was a two and one half year project to develop and verify the manufacturability and serviceability of welded tube membrane panels made from high performance materials suitable for the AUSC steam cycles, defined as high pressure steam turbine inlet conditions of 700-760°C (1292-1400°F) and 24.5-35MPa (3500-5000psi). The difficulty of this challenge lies in the fact that the membrane-welded construction imposes demands on the materials that are unlike any that exist in other parts of the boiler. Tube membrane panels have been designed, fabricated, and installed in boilers for over 50 years with relatively favorable experience when fabricated from carbon and Cr-Mo low alloy steels. The AUSC steam cycle requires membrane tube panels fabricated from materials that have not been used in a weldment with metal temperatures in the range of 582-610°C (1080-1130°F). Fabrication materials chosen for the tubing were Grade 92 and HR6W. Grade 92 is a creep strength enhanced ferritic Cr-Mo alloy and HR6W is a high nickel alloy. Once the materials were chosen, GE performed the engineering design of the panels, prepared shop manufacturing drawings, and developed manufacturing and inspection plans. After the materials were purchased, GE manufactured and inspected the tube membrane panels, determined if post fabrication heat treatment of the tube membrane panels was needed, performed pre- and post-weld heat treatment on the Grade 92 panels, conducted final nondestructive inspection of any heat treated tube membrane panels, conducted destructive inspection of the completed tube

  8. Flat or curved thin optical display panel

    Veligdan, J.T.

    1995-01-10

    An optical panel includes a plurality of waveguides stacked together, with each waveguide having a first end and an opposite second end. The first ends collectively define a first face, and the second ends collectively define a second face of the panel. The second face is disposed at an acute face angle relative to the waveguides to provide a panel which is relatively thin compared to the height of the second face. In an exemplary embodiment for use in a projection TV, the first face is substantially smaller in height than the second face and receives a TV image, with the second face defining a screen for viewing the image enlarged. 7 figures.

  9. KUALITAS AKUSTIK PANEL DINDING BERBAHAN BAKU JERAMI

    Christina E. Mediastika

    2008-01-01

    Full Text Available A series of study to explore possibility in using paddy-straw as main material to construct cheap and high quality panels has been developed. Prior to this study, laboratory research to examine strength of compression and tensile of the panels have been conducted, which is showed a significant value for a non-structural panel. The compression is 15 N/mm2 and tensile averaged at 0,5 N/mm2 . In this study, acoustic properties of the panels is to be examined, i.e.: transmission loss (TL, absorption coefficient (, and reverberation time (RT60. The test showed TL of 10 dB and 16 dB,  of 0,4 and 0,8 and improve RT60 from 0,88 sec to 0,35 sec and 0,16 sec (500 Hz is used for reference. Abstract in Bahasa Indonesia: Ketersediaan panel pelapis dinding yang bersifat akustik dengan harga yang lebih terjangkau seperti yang terbuat dari bahan limbah sangatlah penting. Pada penelitian awal telah diselidiki penggunaan jerami sebagai bahan baku pembuatan panel akustik, sekaligus telah dilakukan pengujian terhadap kareakteristik struktural (uji desak dan lentur dari panel tersebut. Dari uji kekuatan struktural, panel memiliki kekuatan desak mencapai 15 N/mm2 dan kuat lentur reta-rata 0,5 N/mm2. Kekuatan ini dianggap mencukupi bagi panel non-struktural yang hanya bertugas untuk memikul beban sendiri. Oleh karena tujuan awal pembuatan panel adalah untuk kepentingan akustik, maka pada penelitian lanjutan, dilakukan uji laboratorium dan lapangan untuk melihat karakterisktik akustiknya. Adapun pengujian meliputi: redaman/insulasi (TL, koefisien serap ( dan waktu dengung (RT60. Dari hasil pengujian, panel mempunyai TL 10 dB dan 16 dB,  0,4 dan 0,8, serta mampu memperbaiki RT60 ruangan dari 0,88 detik menjadi 0,35 detik dan 0,16 detik. Kesemua pengujian menggunakan band frekuensi 500 Hz sebagai acuan. Kata kunci: panel jerami, insulasi, koefisien serap, waktu dengung.

  10. Differing professional opinions: 1987 Special Review Panel

    1987-11-01

    In mid-1987, the Executive Director for Operations of the US Nuclear Regulatory Commission appointed a Special Review Panel to review the existing NRC policy for expressing differing professional views and to recommend possible improvements to the policy, if warranted. Through its own efforts and those of three subpanels and three consultants, the Panel developed recommendations for changes and improvements in five major areas. This report presents those recommendations, along with a detailed explanation of the Panel's findings, copies of the reports of the subpanels and consultants, and the results of a survey of NRC non-clerical employees on the issue

  11. Attachment and Temperament Revisited: Infant Distress, Attachment Disorganization, and the Serotonin Transporter Polymorphism.

    Brumariu, Laura E; Bureau, Jean-François; Nemoda, Zsofia; Sasvari-Szekely, Maria; Lyons-Ruth, Karlen

    This study's aim was to evaluate whether infant disorganized attachment and infant proneness to distress exhibited differential relations to infant genetic factors as indexed by the serotonin transporter polymorphism. The role of the short allele of the serotonin transporter polymorphism (5-HTTLPR) in enhancing sensitivity to fearful and negative affect has been well-established (Canli & Lesch, 2007). In the current study, we used this known property of the short allele to provide a test of an important postulate of attachment theory, namely that infant attachment security or disorganization is not a function of the infant's proneness to distress. Participants were 39 parents and infants assessed between 12 and 18 months in the Strange Situation procedure. Genotype categories for the 5-HTTLPR (and rs25531) were created by both the original and the reclassified grouping system; infant proneness to distress was assessed directly in the Strange Situation Procedure. We also assessed maternal behavior at 18 months to evaluate whether any observed genetic effect indicated a passive effect through the mother. Consistent with previous findings, the 5-HTTLPR short allele was significantly related to the infant's wariness and distress, but was not related to attachment security or attachment disorganization. In addition, maternal disrupted interaction with the infant was not related to infant genotype or infant distress. Results support the concept that infant proneness to distress is associated with serotonergic factors while infant attachment security or disorganization is not a function of either 5-HTTLPR or behaviorally rated proneness to distress.

  12. Thermally induced vibrations of smart solar panel in a low-orbit satellite

    Azadi, E.; Fazelzadeh, S. Ahmad; Azadi, M.

    2017-03-01

    In this paper, a smart flexible satellite moving in a circular orbit with two flexible panels are studied. The panels have been modeled as clamped-free-free-free rectangular plates with attached piezoelectric actuators. It is assumed that the satellite has a pitch angle rotation maneuver. Rapid temperature changes at day-night transitions in orbit generate time dependent bending moments. Satellite maneuver and temperature varying induce vibrations in the appendages. So, to simulate the system, heat radiation effects on the appendages have been considered. The nonlinear equations of motion and the heat transfer equations are coupled and solved simultaneously. So, the governing equations of motion are nonlinear and very complicated ones. Finally, the whole system is simulated and the effects of the heat radiation, radius of the orbit, piezoelectric voltages, and piezoelectric locations on the response of the system are studied.

  13. The Multimodal Assessment of Adult Attachment Security: Developing the Biometric Attachment Test.

    Parra, Federico; Miljkovitch, Raphaële; Persiaux, Gwenaelle; Morales, Michelle; Scherer, Stefan

    2017-04-06

    Attachment theory has been proven essential for mental health, including psychopathology, development, and interpersonal relationships. Validated psychometric instruments to measure attachment abound but suffer from shortcomings common to traditional psychometrics. Recent developments in multimodal fusion and machine learning pave the way for new automated and objective psychometric instruments for adult attachment that combine psychophysiological, linguistic, and behavioral analyses in the assessment of the construct. The aim of this study was to present a new exposure-based, automatic, and objective adult-attachment assessment, the Biometric Attachment Test (BAT), which exposes participants to a short standardized set of visual and music stimuli, whereas their immediate reactions and verbal responses, captured by several computer sense modalities, are automatically analyzed for scoring and classification. We also aimed to empirically validate two of its assumptions: its capacity to measure attachment security and the viability of using themes as placeholders for rotating stimuli. A total of 59 French participants from the general population were assessed using the Adult Attachment Questionnaire (AAQ), the Adult Attachment Projective Picture System (AAP), and the Attachment Multiple Model Interview (AMMI) as ground truth for attachment security. They were then exposed to three different BAT stimuli sets, whereas their faces, voices, heart rate (HR), and electrodermal activity (EDA) were recorded. Psychophysiological features, such as skin-conductance response (SCR) and Bayevsky stress index; behavioral features, such as gaze and facial expressions; as well as linguistic and paralinguistic features, were automatically extracted. An exploratory analysis was conducted using correlation matrices to uncover the features that are most associated with attachment security. A confirmatory analysis was conducted by creating a single composite effects index and by testing it

  14. Application of solar panels in vehicle parking under the concept of distributed generation

    Calderon Vega, Jefferson

    2013-01-01

    An analysis of solar panels technologies is realized to implement an application of distributed generation in vehicle parking. The different technologies available in the market about solar panels are investigated. The climatological and geographical conditions are studied for the use of solar energy. The electrical requirements are determined for the implementation of solar panels as a distributed generation system. The benefit/cost is analyzed in establishments of vehicle parking for the implementation of solar panels. A photovoltaic system was developed in a vehicle parking attached at the Colegio Federado de Ingenieros y Arquitectos, and also the technical feasibility has been determined. The photovoltaic systems about roofs of buildings every day have been more viable, due that the cost of the systems has been lower and more efficient. Crystalline silicon ''mono'' or ''poly'' has been the most reliable option in the development of new technologies in solar cells. Costa Rica is found in a zone where the photovoltaic solar energy is harnessed and should to be fostered by the engineering sector. The installation of photovoltaic systems has contributed to reduce the carbon footprint in the distributed generation [es

  15. Smartphone Magnification Attachment: Microscope or Magnifying Glass

    Hergemöller, Timo; Laumann, Daniel

    2017-09-01

    Today smartphones and tablets do not merely pervade our daily life, but also play a major role in STEM education in general, and in experimental investigations in particular. Enabling teachers and students to make use of these new techniques in physics lessons requires supplying capable and affordable applications. Our article presents the improvement of a low-cost technique turning smartphones into powerful magnifying glasses or microscopes. Adding only a 3D-printed clip attached to the smartphone's camera and inserting a small glass bead in this clip enables smartphones to take pictures with up to 780x magnification (see Fig. 1). In addition, the construction of the smartphone attachments helps to explain and examine the differences between magnifying glasses and microscopes, and shows that the widespread term "smartphone microscope" for this technique is inaccurate from a physics educational perspective.

  16. Attachment to the physical dimension of places.

    Hidalgo, M Carmen; Hernández, Bernardo

    2002-12-01

    Social relationships had been important in explanation and prediction of attachment to places. Although some have asserted the importance of physical aspects of the environment in the formation of attachment ties to a place, the social environment is required for the formation of bonds to a place, although strong emphasis on the social aspect has been questioned and the importance of the physical environment noted. The present objective in two studies was to test whether college students (ns = 30 and 27) show a preference for a place they know, independently of the social interactions developed in them. Results confirmed the hypothesis, i.e., after a very brief stay in a certain place with nobody else there, these college students preferred that place to another with which they had not had previous contact.

  17. Attachments to the common-place

    Blok, Anders

    2015-01-01

    This article builds on ethnographic work concerning on-going collective efforts in the Japanese city of Kyoto aiming to reposition a vernacular style of wooden housing, known as kyō-machiya, into a hybrid eco-design widely considered an appropriate local response to the global challenges of climate...... change. To understand the dynamic interplay of architecture and community-building in this case, the article stages a theoretical debate on the politics of shared attachments between three proponents of French pragmatic sociology: Bruno Latour, Antoine Hennion, and Laurent Thévenot. Drawing in particular...... on Thévenot's notion of ‘commonality in the plural’, the article shows how a range of personal affinities to the architectural form of the kyō-machiya, positioned as an urban ‘common-place’, serves to coordinate across otherwise divergent interests. By taking seriously the role of attachments to common...

  18. Yield strength of attached copper film

    Zhang Yan; Zhang Jian-Min

    2011-01-01

    Variation of stress in attached copper film with an applied strain is measured by X-ray diffraction combined with a four-point bending method. A lower slope of the initial elastic segment of the curve of X-ray measured stress versus applied strain results from incomplete elastic strain transferred from the substrate to the film due to insufficiently strong interface cohesion. So the slope of the initial elastic segment of the X-ray stress (or X-ray strain directly) of the film against the substrate applied strain may be used to measure the film-substrate cohesive strength. The yield strength of the attached copper film is much higher than that of the bulk material and varies linearly with the inverse of the film thickness. (condensed matter: structural, mechanical, and thermal properties)

  19. Vegetation attached to the elephant trunk.

    Tanaka, Akiko; Sakamoto, Toshihito; Okada, Kenji; Okita, Yutaka

    2013-09-01

    The elephant trunk technique is used as a standard method in the approach to staged repair of extensive thoracic aneurysms. Here, we present a rare case of a graft infection, in which vegetation was attached to the distal end of the elephant trunk. A 36-year old male who had undergone total arch replacement with elephant trunk installation for type A aortic dissection was readmitted for high-grade fever. At the time of admission, Osler's nodules were present and brain magnetic resonance imaging showed multiple small emboli and haemorrhages. Transoesophageal echocardiography could not locate any sign of infection within the cardiac chambers, but disclosed vegetation attached to the elephant trunk. He underwent successful emergent graft replacement of the lesion, and no recurrence of the infection has been observed.

  20. Peer Attachment, Perceived Parenting Style, Self-concept, and School Adjustments in Adolescents with Chronic Illness.

    Ahn, Jeong-Ah; Lee, Sunhee

    2016-12-01

    The purpose of this study was to identify how peer attachment and parenting style differentially affect self-concept and school adjustment in adolescents with and without chronic illness. A cross-sectional study using multiple group analysis on the Korean panel data was used. A nationwide stratified multistage cluster sampling method was used and the survey was conducted in 2013 on 2,092 first-year middle school students in Korea. We used standardized instruments by the National Youth Policy Institute to measure peer attachment, parenting style, self-concept, and school adjustment. Multiple-group structural equation modeling was used to evaluate the difference of relations for peer attachment, parenting style, self-concept, and school adjustment variable between adolescents with chronic illness and those without chronic illness. The model fit of a multiple-group structural equation modeling was good. The difference of the path from negative parenting style to self-concept between the two groups was significant, and a significant between-group difference in the overall path was found. This indicated that self-concept in adolescents with chronic illness was more negatively affected by negative parenting style than in adolescents without chronic illness. Healthcare providers can promote the process of school adjustment in several ways, such as discussing this issue directly with adolescent patients, along with their parents and peers, examining how the organization and content of the treatment can be modified according to the adolescents' school life. Copyright © 2016. Published by Elsevier B.V.

  1. Attachment and conduct disorder: The Response Programme.

    Holland, R.; Moretti, M. M.; Verlaan, V.; Peterson, S.

    1993-01-01

    An increasing number of youths are being identified as suffering from behavioral problems that cause difficulties in their family and peer relations, which in turn reduce their chances of academic and vocational success. The common diagnosis given to these disaffiliated youths is conduct disorder. A community-oriented program designed to ensure long-term care for these youths is described. The program is designed to focus members of the youth's environment on the attachment and affiliation is...

  2. Lathe Attachment Finishes Inner Surface of Tubes

    Lancki, A. J.

    1982-01-01

    Extremely smooth finishes are machined on inside surfaces of tubes by new attachment for a lathe. The relatively inexpensive accessory, called a "microhone," holds a honing stone against workpiece by rigid tangs instead of springs as in conventional honing tools. Inner rod permits adjustment of microhoning stone, while outer tube supports assembly. Outer tube is held between split blocks on lathe toolpost. Microhoning can be done with either microhone or workpiece moving and other member stationary.

  3. A Comprehensive Review of New Attachment Therapy.

    1981-01-01

    277. Steadman, S. R.: Resum4 of the literature on root resorption . Angle Orthodont 12: 28, 1942. 278. Held, A-J.: Cementogenesis and the normal and...maintain the attachment in health. 26 9-2 7 3 Sometimes part of the epithelial network of the former root sheath may be seen. 274 Resorptions of the root ...cells produce resorption and ankylosis of the root . 296 ,304- 3 08 Cementogenesis When new cementum forms following surgical detachment, it can form

  4. Machiavellianism and Parental Attachment in Adolescence

    András Láng

    2015-02-01

    Full Text Available Machiavellianism is a well-studied topic in several branches of psychology. Still, it has received little attention from a developmental perspective. Previous retrospective studies linked Machiavellianism to poor parental care, but actual reports of adolescents who live in their family of origin have been ignored so far. Therefore, we investigated the relationship between Machiavellianism and parental attachment in adolescence and possible sex differences based on life history theory. An adolescent sample (N = 376; 17.27 ± .77 years of age completed the Mach-IV and the maternal and paternal versions of revised Inventory of Parent and Peer Attachment (IPPA-R. According to our results, significant sex differences emerged in the relationship between Machiavellianism and attachment to parents. For girls, maternal alienation proved to be the only significant predictor of Machiavellianism, whereas for boys, low intensity and quality of verbal communication with father predicted higher levels of Machiavellianism. Results are discussed from an evolutionary perspective of socialization and from the perspective of emotion regulation.

  5. Cladding Attachment Over Thick Exterior Insulating Sheathing

    Baker, P. [Building Science Corporation, Somerville, MA (United States); Eng, P. [Building Science Corporation, Somerville, MA (United States); Lepage, R. [Building Science Corporation, Somerville, MA (United States)

    2014-01-01

    The addition of insulation to the exterior of buildings is an effective means of increasing the thermal resistance of both wood framed walls as well as mass masonry wall assemblies. For thick layers of exterior insulation (levels greater than 1.5 inches), the use of wood furring strips attached through the insulation back to the structure has been used by many contractors and designers as a means to provide a convenient cladding attachment location (Straube and Smegal 2009, Pettit 2009, Joyce 2009, Ueno 2010). The research presented in this report is intended to help develop a better understanding of the system mechanics involved and the potential for environmental exposure induced movement between the furring strip and the framing. BSC sought to address the following research questions: 1. What are the relative roles of the mechanisms and the magnitudes of the force that influence the vertical displacement resistance of the system? 2. Can the capacity at a specified deflection be reliably calculated using mechanics based equations? 3. What are the impacts of environmental exposure on the vertical displacement of furring strips attached directly through insulation back to a wood structure?

  6. Infant-parent attachment: Definition, types, antecedents, measurement and outcome.

    Benoit, Diane

    2004-10-01

    Attachment theory is one of the most popular and empirically grounded theories relating to parenting. The purpose of the present article is to review some pertinent aspects of attachment theory and findings from attachment research. Attachment is one specific aspect of the relationship between a child and a parent with its purpose being to make a child safe, secure and protected. Attachment is distinguished from other aspects of parenting, such as disciplining, entertaining and teaching. Common misconceptions about what attachment is and what it is not are discussed. The distinction between attachment and bonding is provided. The recognized method to assess infant-parent attachment, the Strange Situation procedure, is described. In addition, a description is provided for the four major types of infant-parent attachment, ie, secure, insecure-avoidant, insecure-resistant and insecure-disorganized. The antecedents and consequences of each of the four types of infant-parent attachment are discussed. A special emphasis is placed on the description of disorganized attachment because of its association with significant emotional and behavioural problems, and poor social and emotional outcomes in high-risk groups and in the majority of children who have disorganized attachment with their primary caregiver. Practical applications of attachment theory and research are presented.

  7. Moonshot Panel Moving Toward Final Report

    An NCI Cancer Currents blog from acting NCI Director Dr. Doug Lowy providing an update on the activities of the National Cancer Moonshot Initiative’s Blue Ribbon Panel and its work to develop a final report.

  8. Panel data analysis of cardiotocograph (CTG) data.

    Horio, Hiroyuki; Kikuchi, Hitomi; Ikeda, Tomoaki

    2013-01-01

    Panel data analysis is a statistical method, widely used in econometrics, which deals with two-dimensional panel data collected over time and over individuals. Cardiotocograph (CTG) which monitors fetal heart rate (FHR) using Doppler ultrasound and uterine contraction by strain gage is commonly used in intrapartum treatment of pregnant women. Although the relationship between FHR waveform pattern and the outcome such as umbilical blood gas data at delivery has long been analyzed, there exists no accumulated FHR patterns from large number of cases. As time-series economic fluctuations in econometrics such as consumption trend has been studied using panel data which consists of time-series and cross-sectional data, we tried to apply this method to CTG data. The panel data composed of a symbolized segment of FHR pattern can be easily handled, and a perinatologist can get the whole FHR pattern view from the microscopic level of time-series FHR data.

  9. JTEC panel on display technologies in Japan

    Tannas, Lawrence E., Jr.; Glenn, William E.; Credelle, Thomas; Doane, J. William; Firester, Arthur H.; Thompson, Malcolm

    1992-01-01

    This report is one in a series of reports that describes research and development efforts in Japan in the area of display technologies. The following are included in this report: flat panel displays (technical findings, liquid crystal display development and production, large flat panel displays (FPD's), electroluminescent displays and plasma panels, infrastructure in Japan's FPD industry, market and projected sales, and new a-Si active matrix liquid crystal display (AMLCD) factory); materials for flat panel displays (liquid crystal materials, and light-emissive display materials); manufacturing and infrastructure of active matrix liquid crystal displays (manufacturing logistics and equipment); passive matrix liquid crystal displays (LCD basics, twisted nematics LCD's, supertwisted nematic LCD's, ferroelectric LCD's, and a comparison of passive matrix LCD technology); active matrix technology (basic active matrix technology, investment environment, amorphous silicon, polysilicon, and commercial products and prototypes); and projection displays (comparison of Japanese and U.S. display research, and technical evaluation of work).

  10. F-111 Bonded Panel Repair Status

    Rider, Andrew

    1999-01-01

    A visit was made to Amberley Airbase between the 6th and 9th of September to consult with RAAF staff on current procedures and problems involved in the maintenance and repair of F-lll honeycomb panels...

  11. Integrally rigidized acoustic interior spacecraft panel

    1976-01-01

    A sandwich panel concept is described which utilizes a monolithic I-beam design as the core. The core and skins are integrally bonded with thermosetting resin into a homogeneous structure. In addition to possessing a high strength to weight ratio, the panel resists combustion, delamination, aging due to fatigue, localized stresses, and exhibits good acoustic properties. Since the panel concept has definite potential as a high flame retardant and low smoke emission panel with excellent structural integrity, aerospace materials were used to optimize the construction for highly demanding space shuttle applications. The specific materials of construction were chosen for low flammability and off-gassing properties as well as for strength, light weight, and sound dampening.

  12. New directions in theory - the panel

    Miller, G.A.; British Columbia Univ., Vancouver

    1990-01-01

    This is a personalized summary of the panel session of 7 July, 1989. The intent of the session was to discuss important questions in few particle theory. The vigorous participation of the audience was sought and received. (orig.)

  13. Multiple Site Damage in Flat Panel Testing

    Shrage, Daniel

    2000-01-01

    This report aimed to experimentally verify analytical models that predict the residual strength of representative aircraft structures, such as wide panels, that are subjected to Multiple Site Damage (MSD...

  14. Behavior of sandwich panels in a fire

    Chelekova, Eugenia

    2018-03-01

    For the last decades there emerged a vast number of buildings and structures erected with the use of sandwich panels. The field of application for this construction material is manifold, especially in the construction of fire and explosion hazardous buildings. In advanced evacu-ation time calculation methods the coefficient of heat losses is defined with dire regard to fire load features, but without account to thermal and physical characteristics of building envelopes, or, to be exact, it is defined for brick and concrete walls with gross heat capacity. That is why the application of the heat loss coefficient expression obtained for buildings of sandwich panels is impossible because of different heat capacity of these panels from the heat capacities of brick and concrete building envelopes. The article conducts an analysis and calculation of the heal loss coefficient for buildings and structures of three layer sandwich panels as building envelopes.

  15. Increasing the efficiency of solar thermal panels

    Dobrnjac, M.; Latinović, T.; Dobrnjac, S.; Živković, P.

    2016-08-01

    The popularity of solar heating systems is increasing for several reasons. These systems are reliable, adaptable and pollution-free, because the renewable solar energy is used. There are many variants of solar systems in the market mainly constructed with copper pipes and absorbers with different quality of absorption surface. Taking into account the advantages and disadvantages of existing solutions, in order to increase efficiency and improve the design of solar panel, the innovative solution has been done. This new solar panel presents connection of an attractive design and the use of constructive appropriate materials with special geometric shapes. Hydraulic and thermotechnical tests that have been performed on this panel showed high hydraulic and structural stability. Further development of the solar panel will be done in the future in order to improve some noticed disadvantages.

  16. Panel backs next-generation synchrotron

    Service, R F

    1999-01-01

    A key federal panel recommended continued research into development of a fourth-generation synchrotron. It would be capable of creating x-ray pulses billions of times more intense than current designs (1 page).

  17. Ultrafast Thermal Cycling of Solar Panels

    Wall, T

    1998-01-01

    Two new cyclers that utilize a novel hybrid approach to perform fast thermal cycling of solar panels have been built and are now operational in the Mechanics and Materials Technology Center at The Aerospace Corporation...

  18. The CRRES high efficiency solar panel

    Trumble, T.M.

    1991-01-01

    This paper reports on the High Efficiency Solar Panel (HESP) experiments which is to provide both engineering and scientific information concerning the effects of space radiation on advanced gallium arsenide (GaAs) solar cells. The HESP experiment consists of an ambient panel, and annealing panel and a programmable load. This experiment, in conjunction with the radiation measurement experiments abroad the CREES, provides the first opportunity to simultaneously measure the trapped radiation belts and the results of radiation damage to solar cells. The engineering information will result in a design guide for selecting the optimum solar array characteristics for different orbits and different lifetimes. The scientific information will provide both correlation of laboratory damage effects to space damage effects and a better model for predicting effective solar cell panel lifetimes

  19. Supersonic Panel Flutter Test Results for Flat Fiber-Glass Sandwich Panels with Foamed Cores

    Tuovila, W. J.; Presnell, John G., Jr.

    1961-01-01

    Flutter tests have been made on flat panels having a 1/4 inch-thick plastic-foam core covered with thin fiber-glass laminates. The testing was done in the Langley Unitary Plan wind tunnel at Mach numbers from 1.76 t o 2.87. The flutter boundary for these panels was found to be near the flutter boundary of thin metal panels when compared on the basis of an equivalent panel stiffness. The results also demonstrated that the depth of the cavity behind the panel has a pronounced influence on flutter. Changing the cavity depth from 1 1/2 inches to 1/2 inch reduced the dynamic pressure at start of flutter by 40 percent. No flutter was obtained when the spacers on the back of the panel were against the bottom of the cavity.

  20. Panel Resource Management (PRM) Implementation and Effects within Safety Review Panel Settings and Dynamics

    Taylor, Robert W.; Nash, Sally K.

    2007-01-01

    While technical training and advanced degree's assure proficiency at specific tasks within engineering disciplines, they fail to address the potential for communication breakdown and decision making errors familiar to multicultural environments where language barriers, intimidating personalities and interdisciplinary misconceptions exist. In an effort to minimize these pitfalls to effective panel review, NASA's lead safety engineers to the ISS Safety Review Panel (SRP), and Payload Safety Review Panel (PSRP) initiated training with their engineers, in conjunction with the panel chairs, and began a Panel Resource Management (PRM) program. The intent of this program focuses on the ability to reduce the barriers inhibiting effective participation from all panel attendees by bolstering participants confidence levels through increased communication skills, situational awareness, debriefing, and a better technical understanding of requirements and systems.

  1. Formation of Monocrystalline 1D and 2D Architectures via Epitaxial Attachment: Bottom-Up Routes through Surfactant-Mediated Arrays of Oriented Nanocrystals.

    Nakagawa, Yoshitaka; Kageyama, Hiroyuki; Oaki, Yuya; Imai, Hiroaki

    2015-06-09

    Monocrystalline architectures with well-defined shapes were achieved by bottom-up routes through epitaxial attachment of Mn3O4 nanocrystals. The crystallographically continuous 1D chains elongated in the a axis and 2D panels having large a or c faces were obtained by removal of the organic mediator from surfactant-mediated 1D and 2D arrays of Mn3O4 nanocrystals, respectively. Our basal approach indicates that the epitaxial attachment through the surfactant-mediated arrays is utilized for fabrication of a wide variety of micrometric architectures from nanometric crystalline units.

  2. Panel-basierte Mixed-Methods-Studien

    Legewie, Nicolas; Tucci, Ingrid

    2016-01-01

    Mixed-Methods-Studien erfreuen sich wachsender Beliebtheit. Immer mehr Studien nutzen dabei auch Panel-basierte Mixed-Methods-Designs, in denen bestehende Längsschnittstudien durch qualitative Befragungsformen ergänzt werden. Innerhalb der reichhaltigen Veröffentlichungen zum Thema Mixed-Methods-Forschung finden sich bisher aber kaum Diskussionen solcher Mixed-Methods-Designs. Im vorliegenden Artikel diskutieren wir Design, Durchführung, sowie Potenzialeund Herausforderungen von Panel-basiert...

  3. Adhesion aspects of polyurethane foam sandwich panels.

    Ng, Simon L.

    2016-01-01

    Sandwich panels, polyurethane foam sandwiched between two sheets of steel, form the walls and roofs in the construction of buildings. ArcelorMittal is a manufacturer of the steel as well as these finished panels. For this project they combined with a supplier of the polyurethane foams, Huntsman Polyurethanes, to joint-fund a research project investigating the fundamental mechanisms of adhesion, as well as the causes of failures in the product which manifests primarily in two different ways...

  4. Lateral resistance of plybamboo wall-panels

    Gonzalez Beltran, G.E.; Herwijnen, van, F.; Janssen, J.J.A.; Moonen, S.P.G.; Gutierrez, J.A.

    2003-01-01

    This paper deals with the experimental and theoretical behavior of plybamboo (kind of plywood made out of bamboo) wall-panels subjected to lateral load. The wall-panels are part of a house design method proposed in the author's PhD thesis for prefabricated social housing in developing countries. Sixteen fullscaled wallpanels with or without window and door openings were tested and their theoretical capacities estimated. Design wind and seismic loads were determined according to the Internatio...

  5. Aerosol Deposition and Solar Panel Performance

    Arnott, W. P.; Rollings, A.; Taylor, S. J.; Parks, J.; Barnard, J.; Holmes, H.

    2015-12-01

    Passive and active solar collector farms are often located in relatively dry desert regions where cloudiness impacts are minimized. These farms may be susceptible to reduced performance due to routine or episodic aerosol deposition on collector surfaces. Intense episodes of wind blown dust deposition may negatively impact farm performance, and trigger need to clean collector surfaces. Aerosol deposition rate depends on size, morphology, and local meteorological conditions. We have developed a system for solar panel performance testing under real world conditions. Two identical 0.74 square meter solar panels are deployed, with one kept clean while the other receives various doses of aerosol deposition or other treatments. A variable load is used with automation to record solar panel maximum output power every 10 minutes. A collocated sonic anemometer measures wind at 10 Hz, allowing for both steady and turbulent characterization to establish a link between wind patterns and particle distribution on the cells. Multispectral photoacoustic instruments measure aerosol light scattering and absorption. An MFRSR quantifies incoming solar radiation. Solar panel albedo is measured along with the transmission spectra of particles collected on the panel surface. Key questions are: At what concentration does aerosol deposition become a problem for solar panel performance? What are the meteorological conditions that most strongly favor aerosol deposition, and are these predictable from current models? Is it feasible to use the outflow from an unmanned aerial vehicle hovering over solar panels to adequately clean their surface? Does aerosol deposition from episodes of nearby forest fires impact performance? The outlook of this research is to build a model that describes environmental effects on solar panel performance. Measurements from summer and fall 2015 will be presented along with insights gleaned from them.

  6. Acoustically Tailored Composite Rotorcraft Fuselage Panels

    2015-07-02

    3.2.4 Band-Gap/Phononic Crystal Structure-borne Sound Barriers 43 3.2.5 Split Panel Concept for Airborne Sound Transmission Reduction 69 3.3 Final...radiated by the transmission housing also impacts the ceiling panels acoustically, which transmit a portion of that sound into the interior. Composite...3.2.4 Band-Gap/Phononic Crystal Structure-borne Sound Barriers Phononic crystals , or arrays of structural discontinuities, can mitigate structure-borne

  7. Continuities and changes in infant attachment patterns across two generations.

    Raby, K Lee; Steele, Ryan D; Carlson, Elizabeth A; Sroufe, L Alan

    2015-01-01

    This study examined the intergenerational continuities and changes in infant attachment patterns within a higher-risk longitudinal sample of 55 female participants born into poverty. Infant attachment was assessed using the Strange Situation when participants were 12 and 18 months as well as several decades later with participants' children. Paralleling earlier findings from this sample on the stability of attachment patterns from infancy to young adulthood, results provided evidence for intergenerational continuities in attachment disorganization but not security. Children of adults with histories of infant attachment disorganization were at an increased risk of forming disorganized attachments. Although changes in infant attachment patterns across the two generations were not correlated with individuals' caregiving experiences or interpersonal stresses and supports during childhood and adolescence, higher quality social support during adulthood was associated with intergenerational changes from insecure to secure infant-caregiver attachment relationships.

  8. Androgyny and Attachment Security: Two Related Models of Optimal Personality.

    Shaver, Phillip R.; And Others

    1996-01-01

    Three studies explore similarities between attachment style typologies and sex role typologies. Both are defined by pairs of dimensions: self model and other model (attachment styles); masculinity, or agency, and femininity, or communion (sex role orientations). Discusses results. (KW)

  9. The use and limitations of attachment theory in child psychotherapy.

    Zilberstein, Karen

    2014-03-01

    Attachment theory and research has proliferated in recent years, spawning new ideas and applications to child therapy. Some of those interventions are creative and useful and rest on solid theory and research, whereas others derive from tenuous assumptions. As an important developmental construct, attachment plays a role in every therapy, but defining that role can be difficult. Therapists must recognize the significance of attachment in treatment but not at the expense of recognizing and treating other issues. This article provides an overview of attachment theory and attachment-based interventions and discusses how to apply those constructs to therapeutic work with children. It reviews attachment theory, assessment, and treatments, and discusses how attachment-focused interventions can be combined with other therapeutic needs and methods. It also considers limitations in the current clinical application of attachment and makes recommendations for further research. (PsycINFO Database Record (c) 2014 APA, all rights reserved).

  10. Gender moderates the relationship between attachment insecurities and emotion dysregulation

    Velotti, P.; D’Aguanno, M.; de Campora, G.; di Francescantonio, S.; Garofalo, C.; Giromini, L.; Petrocchi, C.; Terrasi, M.; Zavattini, G.C.

    2016-01-01

    The relation between attachment styles and emotion regulation is well documented, and emotion dysregulation is considered characteristic of individuals with insecure attachment styles. Although gender differences in emotion regulation have often been reported, it is not clear whether the association

  11. The Improvement of Thermal Insulating Concrete Panel

    Mohammed Ali Nasser Ali

    2018-05-01

    Full Text Available The Iraqi houses flattening the roof by a concrete panel, and because of the panels on the top directly exposed to the solar radiation become unbearably hot and cold during the summer and winter. The traditional concrete panel components are cement, sand, and aggregate, which have a poor thermal property. The usage of materials with low thermal conductivity with no negative reflects on its mechanical properties gives good improvements to the thermal properties of the concrete panel. The practical part of this work was built on a multi-stage mixing plan. In the first stage the mixing ratio based on the ratios of the sand to cement. The second stage mixing ratios based on replacing the coarse aggregate quantities with the Alabaster aggregates, and the third stage the mixing ratios based on the replacement of wood ash instead of the sand. While the fourth stage mixing ratios based on decreasing the thermal conductivity and increasing mechanical properties by adding a multilayer of a plastic net. The result shows that using a concrete panel with components (cement, sand, coarse aggregate, wood ash, and Alabaster aggregates with a mass ratio of (1:1:2:1:1 and 3-plastic layers, gives the best improvement of the thermal properties. Where, the thermal conductivity is reduced by 42% and the specific heat increased by 41.2% as compared to the traditional concrete panel mixing ratio, with mechanical properties are agreed with the Iraqi standards.

  12. Planarity certification of ATLAS Micromegas detector panels

    Mueller, Ralph; Biebel, Otmar; Bortfeldt, Jonathan; Flierl, Bernhard; Hertenberger, Ralf; Loesel, Philipp; Herrmann, Maximilian [LMU Muenchen (Germany); Zibell, Andre [JMU Wuerzburg (Germany)

    2016-07-01

    During the second long LHC shutdown, 2019/20, the precision tracking detectors of the ATLAS muon spectrometer in the inner end caps will be replaced using Micromegas, a planar gas-detector technology. Modules of 2 m{sup 2} area are built in quadruplets from five precisely planar sandwich panels that define the anodes and the cathodes of the four active detector planes. A panel is composed of three consecutive layers FR4 - aluminum honeycomb - FR4. Single plane spatial particle resolution below 100 μm is achievable when the deviations from planarity of the strip-anodes do not exceed 80 μm RMS over the whole active area and the parallelism of the readout strips is within 30 μm. In order to measure the dimensional accuracy of each panel, laser distance sensors combined with a coordinate measurement system have been investigated. The sensor requirements to measure the planarity of the panels are a resolution of 0.3 μm and a beam spot diameter of ∼20 μm, well below 100 μ m the size of the smallest structures. We report on achieved planarities of the panels and the performance of the laser sensor system. A panel with an RMS better than 30 μm was build and the evolution of its planarity due to humidity and temperature effects is shown.

  13. Panel cutting method: new approach to generate panels on a hull in Rankine source potential approximation

    Hee-Jong Choi

    2011-12-01

    Full Text Available In the present study, a new hull panel generation algorithm, namely panel cutting method, was developed to predict flow phenomena around a ship using the Rankine source potential based panel method, where the iterative method was used to satisfy the nonlinear free surface condition and the trim and sinkage of the ship was taken into account. Numerical computations were performed to investigate the validity of the proposed hull panel generation algorithm for Series 60 (CB=0.60 hull and KRISO container ship (KCS, a container ship designed by Maritime and Ocean Engineering Research Institute (MOERI. The computational results were validated by comparing with the existing experimental data.

  14. Panel cutting method: new approach to generate panels on a hull in Rankine source potential approximation

    Choi, Hee-Jong; Chun, Ho-Hwan; Park, Il-Ryong; Kim, Jin

    2011-12-01

    In the present study, a new hull panel generation algorithm, namely panel cutting method, was developed to predict flow phenomena around a ship using the Rankine source potential based panel method, where the iterative method was used to satisfy the nonlinear free surface condition and the trim and sinkage of the ship was taken into account. Numerical computations were performed to investigate the validity of the proposed hull panel generation algorithm for Series 60 (CB=0.60) hull and KRISO container ship (KCS), a container ship designed by Maritime and Ocean Engineering Research Institute (MOERI). The computational results were validated by comparing with the existing experimental data.

  15. PERBANDINGAN UNJUK KERJA ANTARA PANEL SEL SURYA BERPENJEJAK DENGAN PANEL SEL SURYA DIAM

    Syafaruddin Ch

    2010-01-01

    The ability to produce electrical energy at Solar Power Plant  is highly dependent on the magnitude and duration of sun exposure on the solar cell panels. The movement of the sun from east to west that periodicity in every day is a problem at  the  optimization generation of electricity at  Solar Power Plant   if using solar panel that motionless. This is because the solar cell panel can not catch the maximum sun exposure. To solve the above problem then designed a solar cell panel  tracker...

  16. Attachment and the Development of Personality and Social Functioning

    Fransson, Mari

    2014-01-01

    According to attachment theory, the establishment of an attachment bond to a caregiver not only provides the infant with protection from danger, but also many other resources presumably beneficial to the child’s general psychological development. Although there is substantial empirical support for a link between attachment security and social functioning in childhood and adolescence, less is known about whether childhood attachment contributes to social functioning beyond adolescence. Similar...

  17. The application of attachment theory to a psychotherapy case

    2012-01-01

    M.A. The purpose of this study is to illustrate the psychotherapeutic use of Attachment Theory. Attachment Theory is an interpersonal theory which refers to the way an individual internalises an emotional-cognitive model of his relationships with his various attachment figures. These models of ways of relating are reflected in the way an individual speaks. The methodology of the study entailed conducting the semi-structured Adult Attachment Interview to elicit a psychotherapy client's narr...

  18. Attachment icebergs: Maternal and child health nurses' evaluation of infant-caregiver attachment.

    Bryant, Edith; Ridgway, Lael; Lucas, Sandra

    2016-05-01

    Secure attachment of infants to their caregiver is important when promoting the emotional wellbeing and mental health of infants. Maternal and child health (MCH) nurses are well positioned to observe the quality of interactions between infants and caregivers and to assess and intervene. However, as yet there are no approved methods to assess the emotional and mental health of infants in community settings. A qualitative descriptive study of 12 MCH nurses in Victoria, Australia, using semi-structured interviews, was thematically analysed. The data revealed that nurses used many skills to identify and manage attachment difficulties. Key among these were observations of interactions, collaboration with caregivers and reflective practice. Assessments and interventions are also influenced by nurses' emotions, attitudes and workplace factors. An unexpected finding was that attachment markers can be likened to an 'iceberg': warning indicators at the tip can be easily observed by the nurse, while the less obvious underlying factors need to be explored in order to support attachment and improve infant mental health outcomes. Education for nurses should include concepts of attachment and link behaviours with emotional wellbeing.

  19. Attachment representation in institutionalized children: a preliminary study using the child attachment interview.

    Zaccagnino, Maria; Cussino, Martina; Preziosa, Alessandra; Veglia, Fabio; Carassa, Antonella

    2015-01-01

    The experience of being removed from one's home and the transition to a residential care system pose enormous challenges for a child. Substantial evidence has been found regarding severe developmental effects due to early exposition to extreme psychosocial and affective deprivation. The research on Bowlby's theoretical proposals has highlighted the link between insecure, disorganized and atypical attachment patterns and children both living in foster care facilities and adopted out of those institutions. The goal of this pilot study is to investigate the attachment representation in an Italian sample of children in middle childhood (9-13 years old) who have been removed from their homes. Two compared groups of children participated in this study. The first group was composed of 24 Italian children who had been removed from their homes. The second group, considered as the control group, was composed of 35 Italian children who had never been in foster care placement. The quality of children's attachment to their primary caregivers was assessed by the Child Attachment Interview, an innovative semi-structured interview that seeks to bridge the measurement gap identified in middle childhood The children in foster care placement show a higher percentage of insecure and disorganized attachment representations and lower scores on the Child Reflective Functioning Scale. The clinical implications and enhancements to effective intervention for foster children's caretaking are discussed. Copyright © 2014 John Wiley & Sons, Ltd.

  20. From secure dependency to attachment: Mary Ainsworth's integration of Blatz's security theory into Bowlby's attachment theory.

    van Rosmalen, Lenny; van der Horst, Frank C P; van der Veer, René

    2016-02-01

    John Bowlby is generally regarded as the founder of attachment theory, with the help of Mary Ainsworth. Through her Uganda and Baltimore studies Ainsworth provided empirical evidence for attachment theory, and she contributed the notion of the secure base and exploratory behavior, the Strange Situation Procedure and its classification system, and the notion of maternal sensitivity. On closer scrutiny, many of these contributions appear to be heavily influenced by William Blatz and his security theory. Even though Blatz's influence on Ainsworth has been generally acknowledged, this article, partly based on understudied correspondence from several personal archives, is the first to show which specific parts of attachment theory can be traced back directly to Blatz and his security theory. When Ainsworth started working with Bowlby in the 1950s, around the time he turned to evolutionary theory for an explanation of his findings, she integrated much of Blatzian security theory into Bowlby's theory in the making and used her theoretical and practical experience to enrich attachment theory. Even though Blatz is hardly mentioned nowadays, several of his ideas live on in attachment theory. (c) 2016 APA, all rights reserved).

  1. 30 CFR 75.1438 - End attachment replacement.

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false End attachment replacement. 75.1438 Section 75.1438 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND... attachment replacement. Wire rope attachments shall be replaced when cracked, deformed, or excessively worn. ...

  2. 30 CFR 57.19028 - End attachment replacement.

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false End attachment replacement. 57.19028 Section 57.19028 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL... Hoisting Wire Ropes § 57.19028 End attachment replacement. Wire rope attachments shall be replaced when...

  3. 30 CFR 56.19028 - End attachment replacement.

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false End attachment replacement. 56.19028 Section 56.19028 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL... Wire Ropes § 56.19028 End attachment replacement. Wire rope attachments shall be replaced when cracked...

  4. 30 CFR 77.1438 - End attachment replacement.

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false End attachment replacement. 77.1438 Section 77.1438 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND... Personnel Hoisting Wire Ropes § 77.1438 End attachment replacement. Wire rope attachments shall be replaced...

  5. A longitudinal study of maternal attachment and infant developmental outcomes.

    Alhusen, Jeanne L; Hayat, Matthew J; Gross, Deborah

    2013-12-01

    Extant research has demonstrated that compared to adults with insecure attachment styles, more securely attached parents tend to be more responsive, sensitive, and involved parents, resulting in improved outcomes for their children. Less studied is the influence of a mother's attachment style on her attachment to her unborn child during pregnancy and the consequent developmental outcomes of the child during early childhood. Thus, the aim of this prospective longitudinal study was to examine the relationship between maternal-fetal attachment (MFA) during pregnancy and infant and toddler outcomes and the role of mothers' attachment style on early childhood developmental outcomes in an economically disadvantaged sample of women and their children. Gamma regression modeling demonstrated that an avoidant maternal attachment style (b = .98, 95 % CI [.97, .98], p attachment styles and greater depressive symptomatology were more likely to have children demonstrating early childhood developmental delays than those women with less avoidant attachment styles and less depressive symptomatology. Furthermore, women reporting higher MFA during pregnancy had more secure attachment styles, and their children had more optimal early childhood development than those women reporting lower MFA and less secure attachment styles. Findings have implications for enhancing early intervention programs aimed at improving maternal and childhood outcomes. An earlier identification of disruptions in attachment may be beneficial in tailoring interventions focused on the mother-child dyad.

  6. A typology of place attachment and activity involvement

    Andrew J. Mowen; Alan R. Graefe; Randy J. Virden

    1998-01-01

    While previous research suggests that place attachment and activity involvement impact visitor perceptions, it has not examined the simultaneous effects of these affective constructs. This study develops a typology of both place attachment and activity involvement. It examines variations between attachment-involvement levels and visitor evaluations of quality. Results...

  7. Preferential Attachment in Online Networks: Measurement and Explanations

    Kunegis, J; Blattner, M; Moser, C.

    2013-01-01

    We perform an empirical study of the preferential attachment phenomenon in temporal networks and show that on the Web, networks follow a nonlinear preferential attachment model in which the exponent depends on the type of network considered. The classical preferential attachment model for networks

  8. Attachment and group psychotherapy: introduction to a special section.

    Tasca, Giorgio A

    2014-03-01

    The application of attachment theory to adult psychotherapy represents a growing area of research and practice. Despite the conceptual overlap between group therapeutic factors, attachment theory, and therapeutic tasks as outlined by Bowlby (1988), there is little research on attachment functioning in group therapy. Hence, there remain substantial questions about the role of attachment theory in understanding group therapy processes and outcomes. The three studies in this special section advance the research in some of these important areas, including showing that positive changes in self-reported attachment insecurity among clients persist long after group therapy ends; attachment anxiety affects the level and rate of interpersonal learning in groups; and change in attachment to the therapy group has an impact on longer term change in individual group members' attachment. Each article also examines the impact of these attachment concepts on treatment outcomes. Numerous areas remain to be explored when it comes to the implications of attachment theory for understanding and conducting group therapy, including the conceptual and practical overlap between attachment concepts such as security and exploration with group therapeutic factors such as cohesion and interpersonal learning. The articles in this special section begin to address some of these issues related to attachment theory and its implications for group therapists. (c) 2014 APA, all rights reserved.

  9. Fathers in Attachment Theory and Research: A Review

    Bretherton, Inge

    2010-01-01

    This paper provides a brief history of attachment research on fathers as a backdrop against which the other contributions to this volume can be viewed. Empirical research on child-father attachment progressed in four phases and began before Bowlby in 1969 published the first volume of his attachment trilogy. During each phase a different set of…

  10. Attachment Styles among Bullies, Victims and Uninvolved Adolescents

    Koiv, Kristi

    2012-01-01

    Attachment theory provides a frame for understanding the role of attachment styles in the development of bullying behaviour in adolescence. The present study examined attachment styles (secure, avoidant and anxious/ambivalent) that differentiated bullies, victims, bully/victims and uninvolved adolescents. A total of 1,921 students (1,006 girls and…

  11. Attachment Theory in Supervision: A Critical Incident Experience

    Pistole, M. Carole; Fitch, Jenelle C.

    2008-01-01

    Critical incident experiences are a powerful source of counselor development (T. M. Skovholt & P. R. McCarthy, 1988a, 1988b) and are relevant to attachment issues. An attachment theory perspective of supervision is presented and applied to a critical incident case scenario. By focusing on the behavioral systems (i.e., attachment, caregiving, and…

  12. Precursors and sequelae of attachment in foster children

    Oosterman, M.; Schuengel, C.

    2008-01-01

    This study focused on attachment of foster children by examining factors associated with attachment relationships of children raised from birth by the same parents. The sample included 61 children between 26 to 88 months of age and their foster caregivers. Attachment security and caregiver

  13. Attachment security and obesity in US preschool-aged children.

    Anderson, Sarah E; Whitaker, Robert C

    2011-03-01

    To estimate the association between attachment security in children aged 24 months and their risk for obesity at 4½ years of age. Insecure attachment is associated with unhealthy physiologic and behavioral responses to stress, which could lead to development of obesity. Cohort study. National sample of US children born in 2001. Children and mothers participating in the 2003 and 2005-2006 waves of the Early Childhood Longitudinal Study, Birth Cohort, conducted by the National Center for Education Statistics. Our analytic sample included 6650 children (76.0% of children assessed in both waves). Attachment security at 24 months was assessed by trained interviewers during observation in the child's home. Insecure attachment was defined as lowest quartile of attachment security, based on the security score from the Toddler Attachment Sort-45 Item. Obesity at 4½ years of age (sex-specific body mass index ≥95th percentile for age). The prevalence of obesity was 23.1% in children with insecure attachment and 16.6% in those with secure attachment. For children with insecure attachment, the odds of obesity were 1.30 (95% confidence interval, 1.05-1.62) times higher than for children with secure attachment after controlling for the quality of mother-child interaction during play, parenting practices related to obesity, maternal body mass index, and sociodemographic characteristics. Insecure attachment in early childhood may be a risk factor for obesity. Interventions to increase children's attachment security should examine the effects on children's weight.

  14. Epistemological Development and Attachment in European College Students

    Faria, Carla; Soares, Isabel; Silva, Carolina; Bastos, Alice

    2015-01-01

    Epistemological development and attachment theory have been independent frameworks for understanding psychological development. This study examined the association between epistemological development (using the Measure of Epistemological Reflection) and attachment (using the Adult Attachment Interview) in a sample of 60 pre- and postgraduated…

  15. Photoswitchable method for the ordered attachment of proteins to surfaces

    Camarero, Julio A.; De Yoreo, James J.; Kwon, Youngeun

    2010-04-20

    Described herein is a method for the attachment of proteins to any solid support with control over the orientation of the attachment. The method is extremely efficient, not requiring the previous purification of the protein to be attached, and can be activated by UV-light. Spatially addressable arrays of multiple protein components can be generated by using standard photolithographic techniques.

  16. The Influence of Attachment Security on Preschool Children's Empathic Concern

    Murphy, Tia Panfile; Laible, Deborah J.

    2013-01-01

    The current study examined the direction of the association between children's attachment security and empathic responding. At 42 and 48 months of age, 69 children's empathic concern was observed, and mothers reported the children's attachment. Results indicated that attachment at 42 months predicted empathic concern at 48 months even after…

  17. Dimensions of attachment among fans within the South African ...

    Attachment to the level of sport in general appeared to be the most highly correlated form of attachment with attendance. Fans appear to attach greater importance to the sport, the level of soccer and the team as opposed to specific players or the coach. The study proposes a framework reflecting both its practical application ...

  18. 30 CFR 77.1437 - End attachment retermination.

    2010-07-01

    ... 77.1437 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS, SURFACE COAL MINES AND SURFACE WORK AREAS OF UNDERGROUND COAL... at an attachment; (b) Improper installation of an attachment; (c) Slippage at an attachment; or (d...

  19. Photoswitchable method for the ordered attachment of proteins to surfaces

    Camarero, Julio A [Livermore, CA; DeYoreo, James J [Clayton, CA; Kwon, Youngeun [Livermore, CA

    2011-07-05

    Described herein is a method for the attachment of proteins to any solid support with control over the orientation of the attachment. The method is extremely efficient, not requiring the previous purification of the protein to be attached, and can be activated by UV-light. Spatially addressable arrays of multiple protein components can be generated by using standard photolithographic techniques.

  20. Phenotypes of Non-Attached Pseudomonas aeruginosa Aggregates Resemble Surface Attached Biofilm

    Alhede, Morten; Kragh, Kasper Nørskov; Qvortrup, Klaus

    2011-01-01

    For a chronic infection to be established, bacteria must be able to cope with hostile conditions such as low iron levels, oxidative stress, and clearance by the host defense, as well as antibiotic treatment. It is generally accepted that biofilm formation facilitates tolerance to these adverse......, RT-PCR as well as traditional culturing techniques to study the properties of Pseudomonas aeruginosa aggregates. We found that non-attached aggregates from stationary-phase cultures have comparable growth rates to surface attached biofilms. The growth rate estimations indicated that, independently...... were also found to be strikingly similar to flow-cell biofilms. Our data indicate that the tolerance of both biofilms and non-attached aggregates towards antibiotics is reversible by physical disruption. We provide evidence that the antibiotic tolerance is likely to be dependent on both...

  1. The Adult Attachment Projective Picture System: integrating attachment into clinical assessment.

    George, Carol; West, Malcolm

    2011-01-01

    This article summarizes the development and validation of the Adult Attachment Projective System (AAP), a measure we developed from the Bowlby-Ainsworth developmental tradition to assess adult attachment status. The AAP has demonstrated excellent concurrent validity with the Adult Attachment Interview (George, Kaplan, & Main, 1984/1985/1996; Main & Goldwyn, 1985-1994; Main, Goldwyn, & Hesse, 2003), interjudge reliability, and test-retest reliability, with no effects of verbal intelligence or social desirability. The AAP coding and classification system and application in clinical and community samples are summarized. Finally, we introduce the 3 other articles that are part of this Special Section and discuss the use of the AAP in therapeutic assessment and treatment.

  2. Best friend attachment versus peer attachment in the prediction of adolescent psychological adjustment.

    Wilkinson, Ross B

    2010-10-01

    This study examined the utility of the newly developed Adolescent Friendship Attachment Scale (AFAS) for the prediction of adolescent psychological health and school attitude. High school students (266 males, 229 females) were recruited from private and public schools in the Australian Capital Territory with ages of participants ranging from 13 to 19 years. Self-report measures of depression, self-esteem, self-competence and school attitude were administered in addition to the AFAS and a short-form of the Inventory of Parental and Peer Attachment (IPPA). Regression analyses revealed that the AFAS Anxious and Avoidant scales added to the prediction of depression, self-esteem, self-competence, and school attitude beyond the contribution of the IPPA. It is concluded that the AFAS taps aspects of adolescent attachment relationships not assessed by the IPPA and provides a useful contribution to research and practice in the area of adolescent psycho-social adjustment.

  3. Panel Discussion: Creating a Spirit of Inquiry in the Classroom

    Leh, Sandra Kundrik; Melincavage, Sharon M.

    2012-01-01

    A paucity of published literature exists related to the use of panel discussion as a teaching strategy. This article describes the panel discussion, the underpinnings of constructivism and the use of panel discussion to create a constructivist classroom environment. Details of planning, evaluating, and challenges of a panel discussion are also…

  4. 21 CFR 516.141 - Qualified expert panels.

    2010-04-01

    ... choose members for the qualified expert panel in accordance with selection criteria listed in paragraph... whether the proposed qualified expert panel meets the selection criteria prior to the panel beginning its... Committee Act, as amended, 5 U.S.C. App. (b) Criteria for the selection of a qualified expert panel. (1) A...

  5. 45 CFR 1801.22 - Interview of Finalists with panel.

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false Interview of Finalists with panel. 1801.22 Section... FOUNDATION HARRY S. TRUMAN SCHOLARSHIP PROGRAM The Competition § 1801.22 Interview of Finalists with panel. The Foundation invites each Finalist to an interview with a regional review panel. Panels evaluate...

  6. From detached to attached buildup complexes

    Rafaelsen, B.; Elvebakk, G.; Andreassen, K.

    2008-01-01

    -like ridges and possibly areas with restricted circulation. Warm-water carbonate buildups, forming ridges and isolated mounds, occur in the Gipsdalen Group (latest Serpukhovian-mid-Sakmarian), where they initially grew in a detached platform setting. The carbonate buildups are several tens of kilometres long...... deposition and buildup growth bridged the detached platform with the attached platform. In the Bjarmeland Group (Lower Permian) 0.35-4.8 km wide, 1.5-27 km long and 60-420 m thick cool-water bryozoan-dominated straight, sinuous and continuous carbonate ridges or atoll-like ridges are located on top...

  7. Is social attachment an addictive disorder?

    Insel, Thomas R

    2003-08-01

    There is a considerable literature on the neurobiology of reward, based largely on studies of addiction or substance abuse. This review considers the possibility that the neural circuits that mediate reward evolved for ethologically relevant cues, such as social attachment. Specifically, mesocorticolimbic dopamine appears important for maternal behavior in rats and pair bonding in monogamous voles. It is not yet clear that dopamine in this pathway mediates the hedonic properties of social bond formation or whether dopamine's role is more relevant to developing associative networks or assigning salience to social stimuli. The neuropeptides oxytocin (OT) and vasopressin (AVP) appear to be critical for linking social signals to the mesocorticolimbic circuit.

  8. Phenotypes of non-attached Pseudomonas aeruginosa aggregates resemble surface attached biofilm.

    Morten Alhede

    Full Text Available For a chronic infection to be established, bacteria must be able to cope with hostile conditions such as low iron levels, oxidative stress, and clearance by the host defense, as well as antibiotic treatment. It is generally accepted that biofilm formation facilitates tolerance to these adverse conditions. However, microscopic investigations of samples isolated from sites of chronic infections seem to suggest that some bacteria do not need to be attached to surfaces in order to establish chronic infections. In this study we employed scanning electron microscopy, confocal laser scanning microscopy, RT-PCR as well as traditional culturing techniques to study the properties of Pseudomonas aeruginosa aggregates. We found that non-attached aggregates from stationary-phase cultures have comparable growth rates to surface attached biofilms. The growth rate estimations indicated that, independently of age, both aggregates and flow-cell biofilm had the same slow growth rate as a stationary phase shaking cultures. Internal structures of the aggregates matrix components and their capacity to survive otherwise lethal treatments with antibiotics (referred to as tolerance and resistance to phagocytes were also found to be strikingly similar to flow-cell biofilms. Our data indicate that the tolerance of both biofilms and non-attached aggregates towards antibiotics is reversible by physical disruption. We provide evidence that the antibiotic tolerance is likely to be dependent on both the physiological states of the aggregates and particular matrix components. Bacterial surface-attachment and subsequent biofilm formation are considered hallmarks of the capacity of microbes to cause persistent infections. We have observed non-attached aggregates in the lungs of cystic fibrosis patients; otitis media; soft tissue fillers and non-healing wounds, and we propose that aggregated cells exhibit enhanced survival in the hostile host environment, compared with non

  9. The importance of shared environment in infant-father attachment: A behavioral genetic study of the Attachment Q-Sort

    Bakermans-Kranenburg, M.J.; van IJzendoorn, M.H.; Bokhorst, C.L.; Schuengel, C.

    2004-01-01

    In this first behavior genetic study on infant-father attachment, we estimated genetic and environmental influences on infant-father attachment behaviors and on temperamental dependency, both assessed with the Attachment Q-Sort (AQS; B. E.Vaughn & E. Waters, 1990; E. Waters, 1995). Mothers of mono-

  10. Relational trauma: using play therapy to treat a disrupted attachment.

    Anderson, Sarah M; Gedo, Paul M

    2013-01-01

    Caregiver-child attachment results in a cognitive-emotional schema of self, other, and self-other relationships. Significantly disrupted attachments may lead to pathogenic internal working models, which may have deleterious consequences; this indicates the need for early attachment intervention. The authors consider the therapy of a 3-year-old boy with aggressive behaviors who had lacked consistent caregiving. Attachment theory can account for the child's psychotherapeutic gains, despite his insecure attachment style. The authors discuss discrepancies between treatment and current research trends.

  11. Attachment style and readiness for psychotherapy among psychiatric outpatients.

    Kealy, David; Tsai, Michelle; Ogrodniczuk, John S

    2017-06-01

    Ninety-two adults attending outpatient mental health services completed measures of attachment style and readiness to engage in psychotherapy. Correlation and linear regression analyses found anxious attachment to be positively associated with treatment-seeking distress and found avoidant attachment to be negatively associated with openness to personal disclosure in the therapy relationship. Insecure attachment may influence prospective patients' readiness for psychotherapy. Patients with an avoidant attachment style may need assistance in preparing for the relational aspects of psychotherapy. © 2016 The British Psychological Society.

  12. Attachment security, personality, and adjustment of elementary school children.

    Goldner, Limor; Scharf, Miri

    2013-01-01

    Children's development is assumed to be closely related to their attachment security and their personality. The authors' aim was to examine the joint contribution of attachment security and personality traits to children's adjustment by examining diverse children's outcomes (emotional symptoms, social functioning, and behavioral problems) and using various perspectives (children, parents, and teachers). The sample comprised 247 8-12-year-old children from low socioeconomic status neighborhoods. Personality and attachment contribute to the different domains of adjustment. In cases of moderation, attachment security moderates the implications of personality traits on children's adjustment. The findings highlight the contribution of positive personality tendencies in playing down the difficulties of insecurely attached children.

  13. Attachment patterns and Reflective Functioning in Traumatized Refugees

    Riber, Karin

    , attachment systems, emotion-regulation, and personality. Attachment research on the consequences of organized violence and forced migration is sparse and research in PTSD-treatment for refugees is lacking behind. Cumulative pre-migration traumatic experiences and ongoing post-migration stressors might lead...... Psychiatry, Denmark. June 2011-March 2012 patients fulfilling inclusion criteria entered the trial. The present sample consisted of those of the 135 patients who were Arabic-speaking (N=67). Measures involved the Adult Attachment Interview, The Reflective Functioning Scale, Revised Adult Attachment Scale...... and reflective functioning will be described and implications for psychotherapy discussed. Keywords: Adult attachment, reflective functioning, refugee traumatisation....

  14. Attachment and prejudice: The mediating role of empathy.

    Boag, Elle M; Carnelley, Katherine B

    2016-06-01

    In two studies, we examined the novel hypothesis that empathy is a mechanism through which the relationship between attachment patterns and prejudice can be explained. Study 1 examined primed attachment security (vs. neutral prime), empathy, and prejudice towards immigrants. Study 2 examined primed attachment patterns (secure, avoidant, anxious), empathy subscales (perspective taking, empathic concern, personal distress), and prejudice towards Muslims. Across both studies, empathy mediated the relationship between primed attachment security and low prejudice levels. The findings suggest that enhancing felt security and empathic skills in individuals high in attachment-avoidance may lead to reduced prejudice. © 2015 The British Psychological Society.

  15. Data quality in probability-based online panels: Nonresponse, attrition, and panel conditioning

    Struminskaya, B.; Methodology and statistics for the behavioural and social sciences

    2014-01-01

    Online panels – surveys administered over the Internet in which persons are asked to complete surveys regularly – offer cost reductions compared to surveys that use more traditional modes of data collection (face-to-face, telephone, and mail). However, some characteristics of online panels may cause

  16. Performance comparison between silicon solar panel and dye-sensitized solar panel in Malaysia

    Hamed, N. K. A.; Ahmad, M. K.; Urus, N. S. T.; Mohamad, F.; Nafarizal, N.; Ahmad, N.; Soon, C. F.; Ameruddin, A. S.; Faridah, A. B.; Shimomura, M.; Murakami, K.

    2017-09-01

    In carrying out experimental research in performance between silicon solar panel and dye-sensitive solar panel, we have been developing a device and a system. This system has been developed consisting of controllers, hardware and software. This system is capable to get most of the input sources. If only need to change the main circuit and coding for a different source input value. This device is able to get the ambient temperature, surface temperature, surrounding humidity, voltage with load, current with load, voltage without load and current without load and save the data into external memory. This device is able to withstand the heat and rain as it was fabricated in a waterproof box. This experiment was conducted to examine the performance of both the solar panels which are capable to maintain their stability and performance. A conclusion based on data populated, the distribution of data for dye-sensitized solar panel is much better than silicon solar panel as dye-sensitized solar panel is very sensitive to heat and not depend only on midday where is that is the maximum ambient temperature for both solar panel as silicon solar panel only can give maximum and high output only when midday.

  17. What do we know about maternal-fetal attachment?

    Shieh, C; Kravitz, M; Wang, H H

    2001-09-01

    A review of the literature suggests that there are three critical attributes related to the concept of maternal-fetal attachment, including cognitive, affective, and altruistic attachment. Cognitive attachment is the desire to know the baby. Affective attachment is the pleasure associated with thoughts of or interaction with the fetus. Altruistic attachment refers to a desire to protect the unborn child. Existing measurements on maternal-fetal attachment are developed based on low-risk and white pregnant women and previous research has not yet resulted in a consistent theoretical model. Future research should focus on development of culturally sensitive instruments and combining qualitative and quantitative measures to broaden theoretical understanding of the concept. Nursing assessment of maternal-fetal attachment is an on-going process. The nurse's role is to reassure those who have developed attachment to their fetuses and to motivate those who are unaware of or unconcerned about their attachment to their fetuses. Collecting data from different attributes of attachment helps nurses identify each woman's attachment patterns and areas of concern.

  18. Automatic outdoor monitoring system for photovoltaic panels.

    Stefancich, Marco; Simpson, Lin; Chiesa, Matteo

    2016-05-01

    Long-term acquisition of solar panel performance parameters, for panels operated at maximum power point in their real environment, is of critical importance in the photovoltaic research sector. However, few options exist for the characterization of non-standard panels such as concentrated photovoltaic systems, heavily soiled or shaded panels or those operating under non-standard spectral illumination; certainly, it is difficult to find such a measurement system that is flexible and affordable enough to be adopted by the smaller research institutes or universities. We present here an instrument aiming to fill this gap, autonomously tracking and maintaining any solar panel at maximum power point while continuously monitoring its operational parameters and dissipating the produced energy without connection to the power grid. The instrument allows periodic acquisition of current-voltage curves to verify the employed maximum power point tracking approach. At the same time, with hardware schematics and software code being provided, it provides a flexible open development environment for the monitoring of non-standard generators like concentrator photovoltaic systems and to test novel power tracking approaches. The key issues, and the corresponding solutions, encountered in the design are analyzed in detail and the relevant schematics presented.

  19. Design scenarios for flat panel photobioreactors

    Slegers, P.M.; Wijffels, R.H.; Straten, G. van; Boxtel, A.J.B. van

    2011-01-01

    Evaluation of the potential of algae production for biofuel and other products at various locations throughout the world requires assessment of algae productivity under varying light conditions and different reactor layouts. A model was developed to predict algae biomass production in flat panel photobioreactors using the interaction between light and algae growth for the algae species Phaeodactylum tricornutum and Thalassiosira pseudonana. The effect of location, variable sunlight and reactor layout on biomass production in single standing and parallel positioned flat panels was considered. Three latitudes were studied representing the Netherlands, France and Algeria. In single standing reactors the highest yearly biomass production is achieved in Algeria. During the year biomass production fluctuates the most in the Netherlands, while it is almost constant in Algeria. Several combinations of path lengths and biomass concentrations can result in the same optimal biomass production. The productivity in parallel place flat panels is strongly influenced by shading and diffuse light penetration between the panels. Panel orientation has a large effect on productivity and at higher latitudes the difference between north-south and east-west orientation may go up to 50%.

  20. Validation of consensus panel diagnosis in dementia.

    Gabel, Matthew J; Foster, Norman L; Heidebrink, Judith L; Higdon, Roger; Aizenstein, Howard J; Arnold, Steven E; Barbas, Nancy R; Boeve, Bradley F; Burke, James R; Clark, Christopher M; Dekosky, Steven T; Farlow, Martin R; Jagust, William J; Kawas, Claudia H; Koeppe, Robert A; Leverenz, James B; Lipton, Anne M; Peskind, Elaine R; Turner, R Scott; Womack, Kyle B; Zamrini, Edward Y

    2010-12-01

    The clinical diagnosis of dementing diseases largely depends on the subjective interpretation of patient symptoms. Consensus panels are frequently used in research to determine diagnoses when definitive pathologic findings are unavailable. Nevertheless, research on group decision making indicates that many factors can adversely affect panel performance. To determine conditions that improve consensus panel diagnosis. Comparison of neuropathologic diagnoses with individual and consensus panel diagnoses based on clinical scenarios only, fludeoxyglucose F 18 positron emission tomography images only, and scenarios plus images. Expert and trainee individual and consensus panel deliberations using a modified Delphi method in a pilot research study of the diagnostic utility of fludeoxyglucose F 18 positron emission tomography. Forty-five patients with pathologically confirmed Alzheimer disease or frontotemporal dementia. Statistical measures of diagnostic accuracy, agreement, and confidence for individual raters and panelists before and after consensus deliberations. The consensus protocol using trainees and experts surpassed the accuracy of individual expert diagnoses when clinical information elicited diverse judgments. In these situations, consensus was 3.5 times more likely to produce positive rather than negative changes in the accuracy and diagnostic certainty of individual panelists. A rule that forced group consensus was at least as accurate as majority and unanimity rules. Using a modified Delphi protocol to arrive at a consensus diagnosis is a reasonable substitute for pathologic information. This protocol improves diagnostic accuracy and certainty when panelist judgments differ and is easily adapted to other research and clinical settings while avoiding the potential pitfalls of group decision making.